* remove arch/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Hi all,
arch/sh has been a long drag because it supports a lot of SOCs, and most
of them haven't even been converted to device tree infrastructure. These
SOCs are generally obsolete as well, and all of the support has been barely
maintained for almost 10 years, and not at all for more than 1 year.
Drop arch/sh and everything that depends on it.
Diffstat:
Documentation/sh/booting.rst | 12
Documentation/sh/features.rst | 3
Documentation/sh/index.rst | 56
Documentation/sh/new-machine.rst | 277 -
Documentation/sh/register-banks.rst | 40
arch/sh/Kbuild | 7
arch/sh/Kconfig | 793 ----
arch/sh/Kconfig.cpu | 100
arch/sh/Kconfig.debug | 78
arch/sh/Makefile | 215 -
arch/sh/boards/Kconfig | 400 --
arch/sh/boards/Makefile | 20
arch/sh/boards/board-apsh4a3a.c | 182
arch/sh/boards/board-apsh4ad0a.c | 132
arch/sh/boards/board-edosk7705.c | 79
arch/sh/boards/board-edosk7760.c | 178
arch/sh/boards/board-espt.c | 105
arch/sh/boards/board-magicpanelr2.c | 390 --
arch/sh/boards/board-polaris.c | 156
arch/sh/boards/board-secureedge5410.c | 75
arch/sh/boards/board-sh2007.c | 146
arch/sh/boards/board-sh7757lcr.c | 604 ---
arch/sh/boards/board-sh7785lcr.c | 384 --
arch/sh/boards/board-shmin.c | 35
arch/sh/boards/board-titan.c | 21
arch/sh/boards/board-urquell.c | 218 -
arch/sh/boards/mach-ap325rxa/Makefile | 3
arch/sh/boards/mach-ap325rxa/sdram.S | 66
arch/sh/boards/mach-ap325rxa/setup.c | 573 ---
arch/sh/boards/mach-dreamcast/Makefile | 7
arch/sh/boards/mach-dreamcast/irq.c | 155
arch/sh/boards/mach-dreamcast/rtc.c | 96
arch/sh/boards/mach-dreamcast/setup.c | 39
arch/sh/boards/mach-ecovec24/Makefile | 10
arch/sh/boards/mach-ecovec24/sdram.S | 108
arch/sh/boards/mach-ecovec24/setup.c | 1521 --------
arch/sh/boards/mach-highlander/Kconfig | 26
arch/sh/boards/mach-highlander/Makefile | 12
arch/sh/boards/mach-highlander/irq-r7780mp.c | 71
arch/sh/boards/mach-highlander/irq-r7780rp.c | 64
arch/sh/boards/mach-highlander/irq-r7785rp.c | 83
arch/sh/boards/mach-highlander/pinmux-r7785rp.c | 17
arch/sh/boards/mach-highlander/psw.c | 119
arch/sh/boards/mach-highlander/setup.c | 416 --
arch/sh/boards/mach-hp6xx/Makefile | 8
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 109
arch/sh/boards/mach-hp6xx/pm.c | 156
arch/sh/boards/mach-hp6xx/pm_wakeup.S | 39
arch/sh/boards/mach-hp6xx/setup.c | 172
arch/sh/boards/mach-kfr2r09/Makefile | 5
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 275 -
arch/sh/boards/mach-kfr2r09/sdram.S | 77
arch/sh/boards/mach-kfr2r09/setup.c | 649 ---
arch/sh/boards/mach-landisk/Makefile | 6
arch/sh/boards/mach-landisk/gio.c | 164
arch/sh/boards/mach-landisk/irq.c | 63
arch/sh/boards/mach-landisk/psw.c | 140
arch/sh/boards/mach-landisk/setup.c | 102
arch/sh/boards/mach-lboxre2/Makefile | 6
arch/sh/boards/mach-lboxre2/irq.c | 27
arch/sh/boards/mach-lboxre2/setup.c | 79
arch/sh/boards/mach-microdev/Makefile | 6
arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157
arch/sh/boards/mach-microdev/io.c | 123
arch/sh/boards/mach-microdev/irq.c | 150
arch/sh/boards/mach-microdev/setup.c | 197 -
arch/sh/boards/mach-migor/Kconfig | 16
arch/sh/boards/mach-migor/Makefile | 3
arch/sh/boards/mach-migor/lcd_qvga.c | 163
arch/sh/boards/mach-migor/sdram.S | 66
arch/sh/boards/mach-migor/setup.c | 649 ---
arch/sh/boards/mach-r2d/Kconfig | 24
arch/sh/boards/mach-r2d/Makefile | 6
arch/sh/boards/mach-r2d/irq.c | 156
arch/sh/boards/mach-r2d/setup.c | 305 -
arch/sh/boards/mach-rsk/Kconfig | 29
arch/sh/boards/mach-rsk/Makefile | 5
arch/sh/boards/mach-rsk/devices-rsk7203.c | 137
arch/sh/boards/mach-rsk/devices-rsk7264.c | 55
arch/sh/boards/mach-rsk/devices-rsk7269.c | 57
arch/sh/boards/mach-rsk/setup.c | 84
arch/sh/boards/mach-sdk7780/Kconfig | 17
arch/sh/boards/mach-sdk7780/Makefile | 6
arch/sh/boards/mach-sdk7780/irq.c | 43
arch/sh/boards/mach-sdk7780/setup.c | 96
arch/sh/boards/mach-sdk7786/Makefile | 5
arch/sh/boards/mach-sdk7786/fpga.c | 69
arch/sh/boards/mach-sdk7786/gpio.c | 46
arch/sh/boards/mach-sdk7786/irq.c | 45
arch/sh/boards/mach-sdk7786/nmi.c | 80
arch/sh/boards/mach-sdk7786/setup.c | 266 -
arch/sh/boards/mach-sdk7786/sram.c | 69
arch/sh/boards/mach-se/7206/Makefile | 6
arch/sh/boards/mach-se/7206/irq.c | 151
arch/sh/boards/mach-se/7206/setup.c | 96
arch/sh/boards/mach-se/7343/Makefile | 6
arch/sh/boards/mach-se/7343/irq.c | 123
arch/sh/boards/mach-se/7343/setup.c | 182
arch/sh/boards/mach-se/770x/Makefile | 6
arch/sh/boards/mach-se/770x/irq.c | 109
arch/sh/boards/mach-se/770x/setup.c | 205 -
arch/sh/boards/mach-se/7721/Makefile | 2
arch/sh/boards/mach-se/7721/irq.c | 42
arch/sh/boards/mach-se/7721/setup.c | 92
arch/sh/boards/mach-se/7722/Makefile | 11
arch/sh/boards/mach-se/7722/irq.c | 116
arch/sh/boards/mach-se/7722/setup.c | 190
arch/sh/boards/mach-se/7724/Makefile | 11
arch/sh/boards/mach-se/7724/irq.c | 143
arch/sh/boards/mach-se/7724/sdram.S | 128
arch/sh/boards/mach-se/7724/setup.c | 986 -----
arch/sh/boards/mach-se/7751/Makefile | 6
arch/sh/boards/mach-se/7751/irq.c | 51
arch/sh/boards/mach-se/7751/setup.c | 60
arch/sh/boards/mach-se/7780/Makefile | 11
arch/sh/boards/mach-se/7780/irq.c | 65
arch/sh/boards/mach-se/7780/setup.c | 111
arch/sh/boards/mach-se/Makefile | 11
arch/sh/boards/mach-se/board-se7619.c | 27
arch/sh/boards/mach-sh03/Makefile | 7
arch/sh/boards/mach-sh03/rtc.c | 143
arch/sh/boards/mach-sh03/setup.c | 97
arch/sh/boards/mach-sh7763rdp/Makefile | 2
arch/sh/boards/mach-sh7763rdp/irq.c | 42
arch/sh/boards/mach-sh7763rdp/setup.c | 213 -
arch/sh/boards/mach-x3proto/Makefile | 4
arch/sh/boards/mach-x3proto/gpio.c | 136
arch/sh/boards/mach-x3proto/ilsel.c | 156
arch/sh/boards/mach-x3proto/setup.c | 270 -
arch/sh/boards/of-generic.c | 172
arch/sh/boot/.gitignore | 5
arch/sh/boot/Makefile | 115
arch/sh/boot/compressed/.gitignore | 2
arch/sh/boot/compressed/Makefile | 66
arch/sh/boot/compressed/ashiftrt.S | 2
arch/sh/boot/compressed/ashldi3.c | 2
arch/sh/boot/compressed/ashlsi3.S | 2
arch/sh/boot/compressed/ashrsi3.S | 2
arch/sh/boot/compressed/cache.c | 13
arch/sh/boot/compressed/head_32.S | 126
arch/sh/boot/compressed/head_64.S | 159
arch/sh/boot/compressed/lshrsi3.S | 2
arch/sh/boot/compressed/misc.c | 146
arch/sh/boot/compressed/vmlinux.scr | 10
arch/sh/boot/dts/Makefile | 2
arch/sh/boot/dts/j2_mimas_v2.dts | 99
arch/sh/boot/romimage/Makefile | 30
arch/sh/boot/romimage/head.S | 85
arch/sh/boot/romimage/mmcif-sh7724.c | 78
arch/sh/boot/romimage/vmlinux.scr | 8
arch/sh/cchips/Kconfig | 46
arch/sh/cchips/hd6446x/Makefile | 4
arch/sh/cchips/hd6446x/hd64461.c | 112
arch/sh/configs/ap325rxa_defconfig | 103
arch/sh/configs/apsh4a3a_defconfig | 91
arch/sh/configs/apsh4ad0a_defconfig | 122
arch/sh/configs/dreamcast_defconfig | 72
arch/sh/configs/ecovec24-romimage_defconfig | 58
arch/sh/configs/ecovec24_defconfig | 132
arch/sh/configs/edosk7705_defconfig | 35
arch/sh/configs/edosk7760_defconfig | 114
arch/sh/configs/espt_defconfig | 114
arch/sh/configs/hp6xx_defconfig | 60
arch/sh/configs/j2_defconfig | 42
arch/sh/configs/kfr2r09-romimage_defconfig | 53
arch/sh/configs/kfr2r09_defconfig | 84
arch/sh/configs/landisk_defconfig | 115
arch/sh/configs/lboxre2_defconfig | 62
arch/sh/configs/magicpanelr2_defconfig | 90
arch/sh/configs/microdev_defconfig | 43
arch/sh/configs/migor_defconfig | 94
arch/sh/configs/polaris_defconfig | 83
arch/sh/configs/r7780mp_defconfig | 109
arch/sh/configs/r7785rp_defconfig | 107
arch/sh/configs/rsk7201_defconfig | 63
arch/sh/configs/rsk7203_defconfig | 121
arch/sh/configs/rsk7264_defconfig | 71
arch/sh/configs/rsk7269_defconfig | 56
arch/sh/configs/rts7751r2d1_defconfig | 91
arch/sh/configs/rts7751r2dplus_defconfig | 96
arch/sh/configs/sdk7780_defconfig | 139
arch/sh/configs/sdk7786_defconfig | 217 -
arch/sh/configs/se7206_defconfig | 108
arch/sh/configs/se7343_defconfig | 96
arch/sh/configs/se7619_defconfig | 43
arch/sh/configs/se7705_defconfig | 54
arch/sh/configs/se7712_defconfig | 101
arch/sh/configs/se7721_defconfig | 127
arch/sh/configs/se7722_defconfig | 56
arch/sh/configs/se7724_defconfig | 132
arch/sh/configs/se7750_defconfig | 55
arch/sh/configs/se7751_defconfig | 46
arch/sh/configs/se7780_defconfig | 106
arch/sh/configs/secureedge5410_defconfig | 53
arch/sh/configs/sh03_defconfig | 126
arch/sh/configs/sh2007_defconfig | 199 -
arch/sh/configs/sh7710voipgw_defconfig | 55
arch/sh/configs/sh7724_generic_defconfig | 41
arch/sh/configs/sh7757lcr_defconfig | 85
arch/sh/configs/sh7763rdp_defconfig | 116
arch/sh/configs/sh7770_generic_defconfig | 43
arch/sh/configs/sh7785lcr_32bit_defconfig | 149
arch/sh/configs/sh7785lcr_defconfig | 117
arch/sh/configs/shmin_defconfig | 52
arch/sh/configs/shx3_defconfig | 103
arch/sh/configs/titan_defconfig | 272 -
arch/sh/configs/ul2_defconfig | 84
arch/sh/configs/urquell_defconfig | 147
arch/sh/drivers/Kconfig | 20
arch/sh/drivers/Makefile | 11
arch/sh/drivers/dma/Kconfig | 74
arch/sh/drivers/dma/Makefile | 9
arch/sh/drivers/dma/dma-api.c | 417 --
arch/sh/drivers/dma/dma-g2.c | 197 -
arch/sh/drivers/dma/dma-pvr2.c | 102
arch/sh/drivers/dma/dma-sh.c | 414 --
arch/sh/drivers/dma/dma-sysfs.c | 164
arch/sh/drivers/dma/dmabrg.c | 196 -
arch/sh/drivers/heartbeat.c | 152
arch/sh/drivers/pci/Makefile | 27
arch/sh/drivers/pci/common.c | 159
arch/sh/drivers/pci/fixups-dreamcast.c | 84
arch/sh/drivers/pci/fixups-landisk.c | 57
arch/sh/drivers/pci/fixups-r7780rp.c | 18
arch/sh/drivers/pci/fixups-rts7751r2d.c | 64
arch/sh/drivers/pci/fixups-sdk7780.c | 40
arch/sh/drivers/pci/fixups-sdk7786.c | 64
arch/sh/drivers/pci/fixups-se7751.c | 113
arch/sh/drivers/pci/fixups-sh03.c | 33
arch/sh/drivers/pci/fixups-snapgear.c | 37
arch/sh/drivers/pci/fixups-titan.c | 36
arch/sh/drivers/pci/ops-dreamcast.c | 79
arch/sh/drivers/pci/ops-sh4.c | 105
arch/sh/drivers/pci/ops-sh7786.c | 168
arch/sh/drivers/pci/pci-dreamcast.c | 97
arch/sh/drivers/pci/pci-sh4.h | 182
arch/sh/drivers/pci/pci-sh7751.c | 179
arch/sh/drivers/pci/pci-sh7751.h | 126
arch/sh/drivers/pci/pci-sh7780.c | 407 --
arch/sh/drivers/pci/pci-sh7780.h | 43
arch/sh/drivers/pci/pci.c | 298 -
arch/sh/drivers/pci/pcie-sh7786.c | 609 ---
arch/sh/drivers/pci/pcie-sh7786.h | 577 ---
arch/sh/drivers/platform_early.c | 340 -
arch/sh/drivers/push-switch.c | 136
arch/sh/drivers/superhyway/Makefile | 7
arch/sh/drivers/superhyway/ops-sh4-202.c | 168
arch/sh/include/asm/Kbuild | 5
arch/sh/include/asm/adc.h | 12
arch/sh/include/asm/addrspace.h | 63
arch/sh/include/asm/alignment.h | 22
arch/sh/include/asm/asm-offsets.h | 2
arch/sh/include/asm/atomic-grb.h | 86
arch/sh/include/asm/atomic-irq.h | 72
arch/sh/include/asm/atomic-llsc.h | 88
arch/sh/include/asm/atomic.h | 38
arch/sh/include/asm/barrier.h | 45
arch/sh/include/asm/bitops-cas.h | 94
arch/sh/include/asm/bitops-grb.h | 173
arch/sh/include/asm/bitops-llsc.h | 147
arch/sh/include/asm/bitops-op32.h | 143
arch/sh/include/asm/bitops.h | 72
arch/sh/include/asm/bl_bit.h | 2
arch/sh/include/asm/bl_bit_32.h | 34
arch/sh/include/asm/bug.h | 121
arch/sh/include/asm/bugs.h | 74
arch/sh/include/asm/cache.h | 46
arch/sh/include/asm/cache_insns.h | 2
arch/sh/include/asm/cache_insns_32.h | 22
arch/sh/include/asm/cacheflush.h | 106
arch/sh/include/asm/checksum.h | 2
arch/sh/include/asm/checksum_32.h | 203 -
arch/sh/include/asm/clock.h | 17
arch/sh/include/asm/cmpxchg-cas.h | 25
arch/sh/include/asm/cmpxchg-grb.h | 95
arch/sh/include/asm/cmpxchg-irq.h | 54
arch/sh/include/asm/cmpxchg-llsc.h | 53
arch/sh/include/asm/cmpxchg-xchg.h | 50
arch/sh/include/asm/cmpxchg.h | 74
arch/sh/include/asm/device.h | 17
arch/sh/include/asm/dma-register.h | 50
arch/sh/include/asm/dma.h | 140
arch/sh/include/asm/dmabrg.h | 24
arch/sh/include/asm/dwarf.h | 417 --
arch/sh/include/asm/elf.h | 211 -
arch/sh/include/asm/entry-macros.S | 123
arch/sh/include/asm/extable.h | 7
arch/sh/include/asm/fb.h | 20
arch/sh/include/asm/fixmap.h | 86
arch/sh/include/asm/flat.h | 33
arch/sh/include/asm/fpu.h | 69
arch/sh/include/asm/freq.h | 12
arch/sh/include/asm/ftrace.h | 48
arch/sh/include/asm/futex-cas.h | 35
arch/sh/include/asm/futex-irq.h | 25
arch/sh/include/asm/futex-llsc.h | 42
arch/sh/include/asm/futex.h | 72
arch/sh/include/asm/gpio.h | 50
arch/sh/include/asm/hardirq.h | 11
arch/sh/include/asm/hd64461.h | 252 -
arch/sh/include/asm/heartbeat.h | 19
arch/sh/include/asm/hugetlb.h | 38
arch/sh/include/asm/hw_breakpoint.h | 70
arch/sh/include/asm/hw_irq.h | 36
arch/sh/include/asm/i2c-sh7760.h | 21
arch/sh/include/asm/io.h | 294 -
arch/sh/include/asm/io_generic.h | 19
arch/sh/include/asm/io_noioport.h | 86
arch/sh/include/asm/io_trapped.h | 59
arch/sh/include/asm/irq.h | 58
arch/sh/include/asm/irqflags.h | 10
arch/sh/include/asm/kdebug.h | 19
arch/sh/include/asm/kexec.h | 72
arch/sh/include/asm/kgdb.h | 38
arch/sh/include/asm/kprobes.h | 57
arch/sh/include/asm/linkage.h | 8
arch/sh/include/asm/machvec.h | 41
arch/sh/include/asm/mmiowb.h | 12
arch/sh/include/asm/mmu.h | 107
arch/sh/include/asm/mmu_context.h | 178
arch/sh/include/asm/mmu_context_32.h | 51
arch/sh/include/asm/mmzone.h | 45
arch/sh/include/asm/module.h | 14
arch/sh/include/asm/page.h | 186
arch/sh/include/asm/pci.h | 91
arch/sh/include/asm/perf_event.h | 30
arch/sh/include/asm/pgalloc.h | 40
arch/sh/include/asm/pgtable-2level.h | 24
arch/sh/include/asm/pgtable-3level.h | 59
arch/sh/include/asm/pgtable.h | 150
arch/sh/include/asm/pgtable_32.h | 462 --
arch/sh/include/asm/platform_early.h | 61
arch/sh/include/asm/posix_types.h | 2
arch/sh/include/asm/processor.h | 173
arch/sh/include/asm/processor_32.h | 202 -
arch/sh/include/asm/ptrace.h | 139
arch/sh/include/asm/ptrace_32.h | 14
arch/sh/include/asm/push-switch.h | 32
arch/sh/include/asm/reboot.h | 22
arch/sh/include/asm/romimage-macros.h | 74
arch/sh/include/asm/rtc.h | 15
arch/sh/include/asm/seccomp.h | 21
arch/sh/include/asm/sections.h | 12
arch/sh/include/asm/setup.h | 25
arch/sh/include/asm/sfp-machine.h | 80
arch/sh/include/asm/sh7760fb.h | 198 -
arch/sh/include/asm/sh_bios.h | 28
arch/sh/include/asm/shmparam.h | 19
arch/sh/include/asm/siu.h | 20
arch/sh/include/asm/smc37c93x.h | 191 -
arch/sh/include/asm/smp-ops.h | 52
arch/sh/include/asm/smp.h | 83
arch/sh/include/asm/sparsemem.h | 12
arch/sh/include/asm/spi.h | 14
arch/sh/include/asm/spinlock-cas.h | 89
arch/sh/include/asm/spinlock-llsc.h | 198 -
arch/sh/include/asm/spinlock.h | 19
arch/sh/include/asm/spinlock_types.h | 22
arch/sh/include/asm/sram.h | 39
arch/sh/include/asm/stackprotector.h | 21
arch/sh/include/asm/stacktrace.h | 21
arch/sh/include/asm/string.h | 2
arch/sh/include/asm/string_32.h | 102
arch/sh/include/asm/suspend.h | 97
arch/sh/include/asm/switch_to.h | 7
arch/sh/include/asm/switch_to_32.h | 131
arch/sh/include/asm/syscall.h | 9
arch/sh/include/asm/syscall_32.h | 69
arch/sh/include/asm/syscalls.h | 14
arch/sh/include/asm/syscalls_32.h | 27
arch/sh/include/asm/thread_info.h | 171
arch/sh/include/asm/timex.h | 24
arch/sh/include/asm/tlb.h | 29
arch/sh/include/asm/tlbflush.h | 52
arch/sh/include/asm/topology.h | 28
arch/sh/include/asm/traps.h | 18
arch/sh/include/asm/traps_32.h | 61
arch/sh/include/asm/types.h | 16
arch/sh/include/asm/uaccess.h | 133
arch/sh/include/asm/uaccess_32.h | 227 -
arch/sh/include/asm/uncached.h | 59
arch/sh/include/asm/unistd.h | 31
arch/sh/include/asm/unwinder.h | 32
arch/sh/include/asm/user.h | 55
arch/sh/include/asm/vermagic.h | 30
arch/sh/include/asm/vga.h | 7
arch/sh/include/asm/vmalloc.h | 4
arch/sh/include/asm/vmlinux.lds.h | 18
arch/sh/include/asm/watchdog.h | 159
arch/sh/include/asm/word-at-a-time.h | 54
arch/sh/include/cpu-common/cpu/addrspace.h | 16
arch/sh/include/cpu-common/cpu/mmu_context.h | 13
arch/sh/include/cpu-common/cpu/pfc.h | 18
arch/sh/include/cpu-common/cpu/rtc.h | 9
arch/sh/include/cpu-common/cpu/sigcontext.h | 18
arch/sh/include/cpu-common/cpu/timer.h | 7
arch/sh/include/cpu-sh2/cpu/cache.h | 40
arch/sh/include/cpu-sh2/cpu/freq.h | 15
arch/sh/include/cpu-sh2/cpu/watchdog.h | 66
arch/sh/include/cpu-sh2a/cpu/addrspace.h | 11
arch/sh/include/cpu-sh2a/cpu/cache.h | 40
arch/sh/include/cpu-sh2a/cpu/freq.h | 13
arch/sh/include/cpu-sh2a/cpu/rtc.h | 9
arch/sh/include/cpu-sh2a/cpu/sh7203.h | 144
arch/sh/include/cpu-sh2a/cpu/sh7264.h | 169
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 213 -
arch/sh/include/cpu-sh2a/cpu/watchdog.h | 2
arch/sh/include/cpu-sh3/cpu/adc.h | 29
arch/sh/include/cpu-sh3/cpu/cache.h | 40
arch/sh/include/cpu-sh3/cpu/dac.h | 42
arch/sh/include/cpu-sh3/cpu/dma-register.h | 38
arch/sh/include/cpu-sh3/cpu/dma.h | 19
arch/sh/include/cpu-sh3/cpu/freq.h | 24
arch/sh/include/cpu-sh3/cpu/gpio.h | 78
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 42
arch/sh/include/cpu-sh3/cpu/serial.h | 11
arch/sh/include/cpu-sh3/cpu/sh7720.h | 175
arch/sh/include/cpu-sh3/cpu/watchdog.h | 22
arch/sh/include/cpu-sh4/cpu/addrspace.h | 41
arch/sh/include/cpu-sh4/cpu/cache.h | 41
arch/sh/include/cpu-sh4/cpu/dma-register.h | 98
arch/sh/include/cpu-sh4/cpu/dma.h | 18
arch/sh/include/cpu-sh4/cpu/fpu.h | 30
arch/sh/include/cpu-sh4/cpu/freq.h | 74
arch/sh/include/cpu-sh4/cpu/mmu_context.h | 79
arch/sh/include/cpu-sh4/cpu/rtc.h | 14
arch/sh/include/cpu-sh4/cpu/sh7722.h | 252 -
arch/sh/include/cpu-sh4/cpu/sh7723.h | 285 -
arch/sh/include/cpu-sh4/cpu/sh7724.h | 319 -
arch/sh/include/cpu-sh4/cpu/sh7734.h | 307 -
arch/sh/include/cpu-sh4/cpu/sh7757.h | 290 -
arch/sh/include/cpu-sh4/cpu/sh7785.h | 260 -
arch/sh/include/cpu-sh4/cpu/sh7786.h | 138
arch/sh/include/cpu-sh4/cpu/shx3.h | 65
arch/sh/include/cpu-sh4/cpu/sigcontext.h | 25
arch/sh/include/cpu-sh4/cpu/sq.h | 33
arch/sh/include/cpu-sh4/cpu/watchdog.h | 41
arch/sh/include/cpu-sh4a/cpu/dma.h | 72
arch/sh/include/cpu-sh4a/cpu/serial.h | 8
arch/sh/include/mach-common/mach/highlander.h | 208 -
arch/sh/include/mach-common/mach/hp6xx.h | 59
arch/sh/include/mach-common/mach/lboxre2.h | 24
arch/sh/include/mach-common/mach/magicpanelr2.h | 64
arch/sh/include/mach-common/mach/mangle-port.h | 46
arch/sh/include/mach-common/mach/microdev.h | 69
arch/sh/include/mach-common/mach/r2d.h | 71
arch/sh/include/mach-common/mach/romimage.h | 12
arch/sh/include/mach-common/mach/sdk7780.h | 79
arch/sh/include/mach-common/mach/secureedge5410.h | 47
arch/sh/include/mach-common/mach/sh2007.h | 118
arch/sh/include/mach-common/mach/sh7763rdp.h | 50
arch/sh/include/mach-common/mach/sh7785lcr.h | 58
arch/sh/include/mach-common/mach/shmin.h | 10
arch/sh/include/mach-common/mach/titan.h | 20
arch/sh/include/mach-common/mach/urquell.h | 69
arch/sh/include/mach-dreamcast/mach/dma.h | 29
arch/sh/include/mach-dreamcast/mach/maple.h | 38
arch/sh/include/mach-dreamcast/mach/pci.h | 24
arch/sh/include/mach-dreamcast/mach/sysasic.h | 46
arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt | 82
arch/sh/include/mach-ecovec24/mach/romimage.h | 48
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 24
arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt | 144
arch/sh/include/mach-kfr2r09/mach/romimage.h | 31
arch/sh/include/mach-landisk/mach/gio.h | 38
arch/sh/include/mach-landisk/mach/iodata_landisk.h | 46
arch/sh/include/mach-migor/mach/migor.h | 16
arch/sh/include/mach-sdk7786/mach/fpga.h | 156
arch/sh/include/mach-sdk7786/mach/irq.h | 8
arch/sh/include/mach-se/mach/mrshpc.h | 53
arch/sh/include/mach-se/mach/se.h | 120
arch/sh/include/mach-se/mach/se7206.h | 14
arch/sh/include/mach-se/mach/se7343.h | 143
arch/sh/include/mach-se/mach/se7721.h | 68
arch/sh/include/mach-se/mach/se7722.h | 98
arch/sh/include/mach-se/mach/se7724.h | 69
arch/sh/include/mach-se/mach/se7751.h | 75
arch/sh/include/mach-se/mach/se7780.h | 106
arch/sh/include/mach-sh03/mach/io.h | 26
arch/sh/include/mach-sh03/mach/sh03.h | 19
arch/sh/include/mach-x3proto/mach/hardware.h | 13
arch/sh/include/mach-x3proto/mach/ilsel.h | 46
arch/sh/include/uapi/asm/Kbuild | 4
arch/sh/include/uapi/asm/auxvec.h | 39
arch/sh/include/uapi/asm/byteorder.h | 11
arch/sh/include/uapi/asm/cachectl.h | 20
arch/sh/include/uapi/asm/cpu-features.h | 28
arch/sh/include/uapi/asm/hw_breakpoint.h | 5
arch/sh/include/uapi/asm/ioctls.h | 116
arch/sh/include/uapi/asm/posix_types.h | 2
arch/sh/include/uapi/asm/posix_types_32.h | 23
arch/sh/include/uapi/asm/ptrace.h | 30
arch/sh/include/uapi/asm/ptrace_32.h | 78
arch/sh/include/uapi/asm/sigcontext.h | 25
arch/sh/include/uapi/asm/signal.h | 18
arch/sh/include/uapi/asm/sockios.h | 18
arch/sh/include/uapi/asm/stat.h | 78
arch/sh/include/uapi/asm/swab.h | 50
arch/sh/include/uapi/asm/unistd.h | 2
arch/sh/kernel/.gitignore | 2
arch/sh/kernel/Makefile | 49
arch/sh/kernel/asm-offsets.c | 60
arch/sh/kernel/cpu/Makefile | 21
arch/sh/kernel/cpu/adc.c | 37
arch/sh/kernel/cpu/clock-cpg.c | 78
arch/sh/kernel/cpu/clock.c | 52
arch/sh/kernel/cpu/fpu.c | 92
arch/sh/kernel/cpu/init.c | 366 -
arch/sh/kernel/cpu/irq/Makefile | 6
arch/sh/kernel/cpu/irq/imask.c | 85
arch/sh/kernel/cpu/irq/ipr.c | 80
arch/sh/kernel/cpu/pfc.c | 25
arch/sh/kernel/cpu/proc.c | 151
arch/sh/kernel/cpu/sh2/Makefile | 12
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74
arch/sh/kernel/cpu/sh2/entry.S | 373 -
arch/sh/kernel/cpu/sh2/ex.S | 44
arch/sh/kernel/cpu/sh2/probe.c | 71
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 -
arch/sh/kernel/cpu/sh2/smp-j2.c | 136
arch/sh/kernel/cpu/sh2a/Makefile | 25
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 82
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 78
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 80
arch/sh/kernel/cpu/sh2a/clock-sh7264.c | 157
arch/sh/kernel/cpu/sh2a/clock-sh7269.c | 181
arch/sh/kernel/cpu/sh2a/entry.S | 247 -
arch/sh/kernel/cpu/sh2a/ex.S | 70
arch/sh/kernel/cpu/sh2a/fpu.c | 572 ---
arch/sh/kernel/cpu/sh2a/opcode_helper.c | 51
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 27
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 27
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 28
arch/sh/kernel/cpu/sh2a/probe.c | 57
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 175
arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 418 --
arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 355 -
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 291 -
arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 552 --
arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 568 --
arch/sh/kernel/cpu/sh3/Makefile | 34
arch/sh/kernel/cpu/sh3/clock-sh3.c | 86
arch/sh/kernel/cpu/sh3/clock-sh7705.c | 81
arch/sh/kernel/cpu/sh3/clock-sh7706.c | 81
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 82
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 75
arch/sh/kernel/cpu/sh3/clock-sh7712.c | 68
arch/sh/kernel/cpu/sh3/entry.S | 509 --
arch/sh/kernel/cpu/sh3/ex.S | 56
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 27
arch/sh/kernel/cpu/sh3/probe.c | 108
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 34
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 21
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 38
arch/sh/kernel/cpu/sh3/setup-sh3.c | 69
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 190
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 246 -
arch/sh/kernel/cpu/sh3/setup-sh7710.c | 189
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 286 -
arch/sh/kernel/cpu/sh3/swsusp.S | 144
arch/sh/kernel/cpu/sh4/Makefile | 37
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174
arch/sh/kernel/cpu/sh4/clock-sh4.c | 77
arch/sh/kernel/cpu/sh4/fpu.c | 425 --
arch/sh/kernel/cpu/sh4/perf_event.c | 265 -
arch/sh/kernel/cpu/sh4/probe.c | 260 -
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 359 -
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 297 -
arch/sh/kernel/cpu/sh4/softfloat.c | 930 ----
arch/sh/kernel/cpu/sh4/sq.c | 414 --
arch/sh/kernel/cpu/sh4a/Makefile | 53
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 277 -
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 270 -
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 253 -
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 301 -
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 367 -
arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 256 -
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 152
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 116
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 70
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 122
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 174
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 189
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 148
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 31
arch/sh/kernel/cpu/sh4a/perf_event.c | 299 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 21
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 27
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 27
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 26
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 24
arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 444 --
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 388 --
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 666 ---
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 644 ---
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 1288 ------
arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 621 ---
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 1242 ------
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 455 --
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 571 ---
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 505 --
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 608 ---
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 841 ----
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 396 --
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 146
arch/sh/kernel/cpu/sh4a/ubc.c | 130
arch/sh/kernel/cpu/shmobile/Makefile | 8
arch/sh/kernel/cpu/shmobile/cpuidle.c | 95
arch/sh/kernel/cpu/shmobile/pm.c | 153
arch/sh/kernel/cpu/shmobile/sleep.S | 402 --
arch/sh/kernel/crash_dump.c | 27
arch/sh/kernel/debugtraps.S | 38
arch/sh/kernel/disassemble.c | 572 ---
arch/sh/kernel/dma-coherent.c | 33
arch/sh/kernel/dumpstack.c | 156
arch/sh/kernel/dwarf.c | 1206 ------
arch/sh/kernel/entry-common.S | 400 --
arch/sh/kernel/ftrace.c | 365 -
arch/sh/kernel/head_32.S | 365 -
arch/sh/kernel/hw_breakpoint.c | 408 --
arch/sh/kernel/idle.c | 57
arch/sh/kernel/io.c | 111
arch/sh/kernel/io_trapped.c | 291 -
arch/sh/kernel/iomap.c | 162
arch/sh/kernel/ioport.c | 41
arch/sh/kernel/irq.c | 249 -
arch/sh/kernel/irq_32.c | 54
arch/sh/kernel/kdebugfs.c | 14
arch/sh/kernel/kgdb.c | 378 -
arch/sh/kernel/kprobes.c | 452 --
arch/sh/kernel/machine_kexec.c | 204 -
arch/sh/kernel/machvec.c | 122
arch/sh/kernel/module.c | 104
arch/sh/kernel/nmi_debug.c | 75
arch/sh/kernel/perf_callchain.c | 32
arch/sh/kernel/perf_event.c | 363 -
arch/sh/kernel/process.c | 77
arch/sh/kernel/process_32.c | 197 -
arch/sh/kernel/ptrace.c | 34
arch/sh/kernel/ptrace_32.c | 487 --
arch/sh/kernel/reboot.c | 96
arch/sh/kernel/relocate_kernel.S | 230 -
arch/sh/kernel/return_address.c | 56
arch/sh/kernel/setup.c | 356 -
arch/sh/kernel/sh_bios.c | 169
arch/sh/kernel/sh_ksyms_32.c | 118
arch/sh/kernel/signal_32.c | 507 --
arch/sh/kernel/smp.c | 471 --
arch/sh/kernel/stacktrace.c | 79
arch/sh/kernel/swsusp.c | 35
arch/sh/kernel/sys_sh.c | 96
arch/sh/kernel/sys_sh32.c | 61
arch/sh/kernel/syscalls/Makefile | 32
arch/sh/kernel/syscalls/syscall.tbl | 455 --
arch/sh/kernel/syscalls_32.S | 17
arch/sh/kernel/time.c | 45
arch/sh/kernel/topology.c | 74
arch/sh/kernel/traps.c | 204 -
arch/sh/kernel/traps_32.c | 795 ----
arch/sh/kernel/unwinder.c | 165
arch/sh/kernel/vmlinux.lds.S | 82
arch/sh/kernel/vsyscall/.gitignore | 2
arch/sh/kernel/vsyscall/Makefile | 36
arch/sh/kernel/vsyscall/vsyscall-note.S | 26
arch/sh/kernel/vsyscall/vsyscall-sigreturn.S | 75
arch/sh/kernel/vsyscall/vsyscall-syscall.S | 11
arch/sh/kernel/vsyscall/vsyscall-trapa.S | 40
arch/sh/kernel/vsyscall/vsyscall.c | 93
arch/sh/kernel/vsyscall/vsyscall.lds.S | 85
arch/sh/lib/Makefile | 32
arch/sh/lib/__clear_user.S | 109
arch/sh/lib/ashiftrt.S | 128
arch/sh/lib/ashldi3.c | 30
arch/sh/lib/ashlsi3.S | 189
arch/sh/lib/ashrdi3.c | 32
arch/sh/lib/ashrsi3.S | 179
arch/sh/lib/checksum.S | 365 -
arch/sh/lib/copy_page.S | 390 --
arch/sh/lib/delay.c | 54
arch/sh/lib/div64-generic.c | 20
arch/sh/lib/div64.S | 47
arch/sh/lib/io.c | 79
arch/sh/lib/libgcc.h | 27
arch/sh/lib/lshrdi3.c | 30
arch/sh/lib/lshrsi3.S | 188
arch/sh/lib/mcount.S | 287 -
arch/sh/lib/memchr.S | 27
arch/sh/lib/memcpy-sh4.S | 800 ----
arch/sh/lib/memcpy.S | 228 -
arch/sh/lib/memmove.S | 255 -
arch/sh/lib/memset-sh4.S | 108
arch/sh/lib/memset.S | 59
arch/sh/lib/movmem.S | 217 -
arch/sh/lib/strlen.S | 71
arch/sh/lib/udiv_qrnnd.S | 60
arch/sh/lib/udivsi3.S | 66
arch/sh/lib/udivsi3_i4i-Os.S | 128
arch/sh/lib/udivsi3_i4i.S | 645 ---
arch/sh/math-emu/Makefile | 2
arch/sh/math-emu/math.c | 506 --
arch/sh/math-emu/sfp-util.h | 73
arch/sh/mm/Kconfig | 254 -
arch/sh/mm/Makefile | 45
arch/sh/mm/alignment.c | 189
arch/sh/mm/asids-debugfs.c | 59
arch/sh/mm/cache-debugfs.c | 109
arch/sh/mm/cache-j2.c | 64
arch/sh/mm/cache-sh2.c | 90
arch/sh/mm/cache-sh2a.c | 188
arch/sh/mm/cache-sh3.c | 102
arch/sh/mm/cache-sh4.c | 390 --
arch/sh/mm/cache-sh7705.c | 194 -
arch/sh/mm/cache-shx3.c | 44
arch/sh/mm/cache.c | 360 -
arch/sh/mm/consistent.c | 65
arch/sh/mm/extable_32.c | 24
arch/sh/mm/fault.c | 504 --
arch/sh/mm/flush-sh4.c | 111
arch/sh/mm/hugetlbpage.c | 82
arch/sh/mm/init.c | 424 --
arch/sh/mm/ioremap.c | 192 -
arch/sh/mm/ioremap.h | 23
arch/sh/mm/ioremap_fixed.c | 135
arch/sh/mm/kmap.c | 65
arch/sh/mm/mmap.c | 184
arch/sh/mm/nommu.c | 98
arch/sh/mm/numa.c | 56
arch/sh/mm/pgtable.c | 57
arch/sh/mm/pmb.c | 887 ----
arch/sh/mm/sram.c | 35
arch/sh/mm/tlb-debugfs.c | 160
arch/sh/mm/tlb-pteaex.c | 106
arch/sh/mm/tlb-sh3.c | 95
arch/sh/mm/tlb-sh4.c | 108
arch/sh/mm/tlb-urb.c | 93
arch/sh/mm/tlbex_32.c | 82
arch/sh/mm/tlbflush_32.c | 137
arch/sh/mm/uncached.c | 44
arch/sh/tools/Makefile | 16
arch/sh/tools/gen-mach-types | 48
arch/sh/tools/mach-types | 67
b/Documentation/arch.rst | 1
b/Documentation/watchdog/watchdog-parameters.rst | 12
b/MAINTAINERS | 10
b/drivers/Makefile | 1
b/drivers/base/platform.c | 4
b/drivers/clocksource/sh_cmt.c | 16
b/drivers/clocksource/sh_mtu2.c | 16
b/drivers/clocksource/sh_tmu.c | 17
b/drivers/cpufreq/Kconfig | 14
b/drivers/cpufreq/Makefile | 1
b/drivers/dma/sh/Kconfig | 20
b/drivers/dma/sh/Makefile | 13
b/drivers/gpu/drm/Kconfig | 2
b/drivers/gpu/drm/Makefile | 1
b/drivers/i2c/busses/Kconfig | 13
b/drivers/i2c/busses/Makefile | 1
b/drivers/input/keyboard/Kconfig | 10
b/drivers/input/keyboard/Makefile | 1
b/drivers/media/platform/renesas/Kconfig | 11
b/drivers/media/platform/renesas/Makefile | 1
b/drivers/mmc/host/Kconfig | 6
b/drivers/mmc/host/sh_mmcif.c | 21
b/drivers/mtd/nand/raw/Kconfig | 8
b/drivers/mtd/nand/raw/Makefile | 1
b/drivers/net/ethernet/8390/Kconfig | 14
b/drivers/net/ethernet/8390/Makefile | 1
b/drivers/net/ethernet/renesas/Kconfig | 2
b/drivers/net/ethernet/smsc/Kconfig | 4
b/drivers/pinctrl/renesas/Kconfig | 63
b/drivers/pinctrl/renesas/Makefile | 27
b/drivers/pinctrl/renesas/core.c | 598 ---
b/drivers/rtc/Kconfig | 4
b/drivers/rtc/rtc-sh.c | 18
b/drivers/spi/Kconfig | 24
b/drivers/spi/Makefile | 3
b/drivers/tty/serial/Kconfig | 3
b/drivers/tty/serial/sh-sci.c | 57
b/drivers/tty/vt/keyboard.c | 2
b/drivers/usb/host/Kconfig | 18
b/drivers/usb/host/ehci-hcd.c | 7
b/drivers/usb/renesas_usbhs/Kconfig | 2
b/drivers/video/console/Kconfig | 2
b/drivers/video/fbdev/Kconfig | 17
b/drivers/video/fbdev/Makefile | 1
b/drivers/video/logo/Kconfig | 15
b/drivers/video/logo/Makefile | 3
b/drivers/video/logo/logo.c | 12
b/drivers/watchdog/Kconfig | 20
b/drivers/watchdog/Makefile | 3
b/fs/Kconfig.binfmt | 2
b/fs/minix/Kconfig | 2
b/include/linux/cpuhotplug.h | 1
b/include/linux/platform_device.h | 15
b/include/linux/sh_intc.h | 4
b/include/linux/shdma-base.h | 4
b/init/Kconfig | 2
b/kernel/sysctl.c | 3
b/lib/Kconfig.debug | 2
b/lib/math/div64.c | 4
b/lib/test_user_copy.c | 3
b/scripts/coccinelle/misc/cond_no_effect.cocci | 13
b/scripts/head-object-list.txt | 1
b/sound/Kconfig | 2
b/sound/Makefile | 2
b/sound/soc/sh/Kconfig | 48
b/sound/soc/sh/Makefile | 16
b/sound/soc/sh/fsi.c | 9
b/tools/include/asm/barrier.h | 2
b/tools/perf/util/dwarf-regs.c | 1
drivers/cpufreq/sh-cpufreq.c | 175
drivers/dma/sh/shdma-base.c | 1052 -----
drivers/dma/sh/shdma.h | 61
drivers/dma/sh/shdmac.c | 938 ----
drivers/gpu/drm/shmobile/Kconfig | 12
drivers/gpu/drm/shmobile/Makefile | 8
drivers/gpu/drm/shmobile/shmob_drm_backlight.c | 82
drivers/gpu/drm/shmobile/shmob_drm_backlight.h | 19
drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ---
drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55
drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 -
drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42
drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150
drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29
drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -
drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19
drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 -
drivers/i2c/busses/i2c-sh7760.c | 565 --
drivers/input/keyboard/sh_keysc.c | 334 -
drivers/media/platform/renesas/sh_vou.c | 1375 -------
drivers/mtd/nand/raw/sh_flctl.c | 1234 ------
drivers/net/ethernet/8390/stnic.c | 302 -
drivers/pinctrl/renesas/pfc-sh7203.c | 1577 --------
drivers/pinctrl/renesas/pfc-sh7264.c | 2131 -----------
drivers/pinctrl/renesas/pfc-sh7269.c | 2851 ---------------
drivers/pinctrl/renesas/pfc-sh7720.c | 1201 ------
drivers/pinctrl/renesas/pfc-sh7722.c | 1703 --------
drivers/pinctrl/renesas/pfc-sh7723.c | 1902 ----------
drivers/pinctrl/renesas/pfc-sh7724.c | 2177 -----------
drivers/pinctrl/renesas/pfc-sh7734.c | 2408 ------------
drivers/pinctrl/renesas/pfc-sh7757.c | 2219 -----------
drivers/pinctrl/renesas/pfc-sh7785.c | 1258 ------
drivers/pinctrl/renesas/pfc-sh7786.c | 809 ----
drivers/pinctrl/renesas/pfc-shx3.c | 557 --
drivers/sh/Kconfig | 6
drivers/sh/Makefile | 12
drivers/sh/clk/Makefile | 4
drivers/sh/clk/core.c | 624 ---
drivers/sh/clk/cpg.c | 477 --
drivers/sh/intc/Kconfig | 44
drivers/sh/intc/Makefile | 6
drivers/sh/intc/access.c | 246 -
drivers/sh/intc/balancing.c | 97
drivers/sh/intc/chip.c | 211 -
drivers/sh/intc/core.c | 501 --
drivers/sh/intc/handle.c | 306 -
drivers/sh/intc/internals.h | 191 -
drivers/sh/intc/irqdomain.c | 68
drivers/sh/intc/userimask.c | 84
drivers/sh/intc/virq-debugfs.c | 54
drivers/sh/intc/virq.c | 269 -
drivers/sh/maple/Makefile | 4
drivers/sh/maple/maple.c | 895 ----
drivers/sh/pm_runtime.c | 40
drivers/sh/superhyway/Makefile | 8
drivers/sh/superhyway/superhyway-sysfs.c | 54
drivers/sh/superhyway/superhyway.c | 234 -
drivers/spi/spi-jcore.c | 235 -
drivers/spi/spi-sh-sci.c | 197 -
drivers/spi/spi-sh.c | 474 --
drivers/usb/host/ehci-sh.c | 182
drivers/video/fbdev/sh7760fb.c | 587 ---
drivers/video/logo/logo_superh_clut224.ppm | 1604 --------
drivers/video/logo/logo_superh_vga16.ppm | 1604 --------
drivers/watchdog/shwdt.c | 344 -
include/linux/mtd/sh_flctl.h | 180
include/linux/sh_clk.h | 213 -
include/linux/superhyway.h | 107
sound/sh/Kconfig | 32
sound/sh/Makefile | 11
sound/sh/aica.c | 628 ---
sound/sh/aica.h | 68
sound/sh/sh_dac_audio.c | 412 --
sound/soc/sh/dma-sh7760.c | 334 -
sound/soc/sh/hac.c | 345 -
sound/soc/sh/migor.c | 205 -
sound/soc/sh/sh7760-ac97.c | 72
sound/soc/sh/siu.h | 180
sound/soc/sh/siu_dai.c | 799 ----
sound/soc/sh/siu_pcm.c | 553 --
sound/soc/sh/ssi.c | 403 --
896 files changed, 46 insertions(+), 138518 deletions(-)
^ permalink raw reply [flat|nested] 263+ messages in thread
* remove arch/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi all,
arch/sh has been a long drag because it supports a lot of SOCs, and most
of them haven't even been converted to device tree infrastructure. These
SOCs are generally obsolete as well, and all of the support has been barely
maintained for almost 10 years, and not at all for more than 1 year.
Drop arch/sh and everything that depends on it.
Diffstat:
Documentation/sh/booting.rst | 12
Documentation/sh/features.rst | 3
Documentation/sh/index.rst | 56
Documentation/sh/new-machine.rst | 277 -
Documentation/sh/register-banks.rst | 40
arch/sh/Kbuild | 7
arch/sh/Kconfig | 793 ----
arch/sh/Kconfig.cpu | 100
arch/sh/Kconfig.debug | 78
arch/sh/Makefile | 215 -
arch/sh/boards/Kconfig | 400 --
arch/sh/boards/Makefile | 20
arch/sh/boards/board-apsh4a3a.c | 182
arch/sh/boards/board-apsh4ad0a.c | 132
arch/sh/boards/board-edosk7705.c | 79
arch/sh/boards/board-edosk7760.c | 178
arch/sh/boards/board-espt.c | 105
arch/sh/boards/board-magicpanelr2.c | 390 --
arch/sh/boards/board-polaris.c | 156
arch/sh/boards/board-secureedge5410.c | 75
arch/sh/boards/board-sh2007.c | 146
arch/sh/boards/board-sh7757lcr.c | 604 ---
arch/sh/boards/board-sh7785lcr.c | 384 --
arch/sh/boards/board-shmin.c | 35
arch/sh/boards/board-titan.c | 21
arch/sh/boards/board-urquell.c | 218 -
arch/sh/boards/mach-ap325rxa/Makefile | 3
arch/sh/boards/mach-ap325rxa/sdram.S | 66
arch/sh/boards/mach-ap325rxa/setup.c | 573 ---
arch/sh/boards/mach-dreamcast/Makefile | 7
arch/sh/boards/mach-dreamcast/irq.c | 155
arch/sh/boards/mach-dreamcast/rtc.c | 96
arch/sh/boards/mach-dreamcast/setup.c | 39
arch/sh/boards/mach-ecovec24/Makefile | 10
arch/sh/boards/mach-ecovec24/sdram.S | 108
arch/sh/boards/mach-ecovec24/setup.c | 1521 --------
arch/sh/boards/mach-highlander/Kconfig | 26
arch/sh/boards/mach-highlander/Makefile | 12
arch/sh/boards/mach-highlander/irq-r7780mp.c | 71
arch/sh/boards/mach-highlander/irq-r7780rp.c | 64
arch/sh/boards/mach-highlander/irq-r7785rp.c | 83
arch/sh/boards/mach-highlander/pinmux-r7785rp.c | 17
arch/sh/boards/mach-highlander/psw.c | 119
arch/sh/boards/mach-highlander/setup.c | 416 --
arch/sh/boards/mach-hp6xx/Makefile | 8
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 109
arch/sh/boards/mach-hp6xx/pm.c | 156
arch/sh/boards/mach-hp6xx/pm_wakeup.S | 39
arch/sh/boards/mach-hp6xx/setup.c | 172
arch/sh/boards/mach-kfr2r09/Makefile | 5
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 275 -
arch/sh/boards/mach-kfr2r09/sdram.S | 77
arch/sh/boards/mach-kfr2r09/setup.c | 649 ---
arch/sh/boards/mach-landisk/Makefile | 6
arch/sh/boards/mach-landisk/gio.c | 164
arch/sh/boards/mach-landisk/irq.c | 63
arch/sh/boards/mach-landisk/psw.c | 140
arch/sh/boards/mach-landisk/setup.c | 102
arch/sh/boards/mach-lboxre2/Makefile | 6
arch/sh/boards/mach-lboxre2/irq.c | 27
arch/sh/boards/mach-lboxre2/setup.c | 79
arch/sh/boards/mach-microdev/Makefile | 6
arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157
arch/sh/boards/mach-microdev/io.c | 123
arch/sh/boards/mach-microdev/irq.c | 150
arch/sh/boards/mach-microdev/setup.c | 197 -
arch/sh/boards/mach-migor/Kconfig | 16
arch/sh/boards/mach-migor/Makefile | 3
arch/sh/boards/mach-migor/lcd_qvga.c | 163
arch/sh/boards/mach-migor/sdram.S | 66
arch/sh/boards/mach-migor/setup.c | 649 ---
arch/sh/boards/mach-r2d/Kconfig | 24
arch/sh/boards/mach-r2d/Makefile | 6
arch/sh/boards/mach-r2d/irq.c | 156
arch/sh/boards/mach-r2d/setup.c | 305 -
arch/sh/boards/mach-rsk/Kconfig | 29
arch/sh/boards/mach-rsk/Makefile | 5
arch/sh/boards/mach-rsk/devices-rsk7203.c | 137
arch/sh/boards/mach-rsk/devices-rsk7264.c | 55
arch/sh/boards/mach-rsk/devices-rsk7269.c | 57
arch/sh/boards/mach-rsk/setup.c | 84
arch/sh/boards/mach-sdk7780/Kconfig | 17
arch/sh/boards/mach-sdk7780/Makefile | 6
arch/sh/boards/mach-sdk7780/irq.c | 43
arch/sh/boards/mach-sdk7780/setup.c | 96
arch/sh/boards/mach-sdk7786/Makefile | 5
arch/sh/boards/mach-sdk7786/fpga.c | 69
arch/sh/boards/mach-sdk7786/gpio.c | 46
arch/sh/boards/mach-sdk7786/irq.c | 45
arch/sh/boards/mach-sdk7786/nmi.c | 80
arch/sh/boards/mach-sdk7786/setup.c | 266 -
arch/sh/boards/mach-sdk7786/sram.c | 69
arch/sh/boards/mach-se/7206/Makefile | 6
arch/sh/boards/mach-se/7206/irq.c | 151
arch/sh/boards/mach-se/7206/setup.c | 96
arch/sh/boards/mach-se/7343/Makefile | 6
arch/sh/boards/mach-se/7343/irq.c | 123
arch/sh/boards/mach-se/7343/setup.c | 182
arch/sh/boards/mach-se/770x/Makefile | 6
arch/sh/boards/mach-se/770x/irq.c | 109
arch/sh/boards/mach-se/770x/setup.c | 205 -
arch/sh/boards/mach-se/7721/Makefile | 2
arch/sh/boards/mach-se/7721/irq.c | 42
arch/sh/boards/mach-se/7721/setup.c | 92
arch/sh/boards/mach-se/7722/Makefile | 11
arch/sh/boards/mach-se/7722/irq.c | 116
arch/sh/boards/mach-se/7722/setup.c | 190
arch/sh/boards/mach-se/7724/Makefile | 11
arch/sh/boards/mach-se/7724/irq.c | 143
arch/sh/boards/mach-se/7724/sdram.S | 128
arch/sh/boards/mach-se/7724/setup.c | 986 -----
arch/sh/boards/mach-se/7751/Makefile | 6
arch/sh/boards/mach-se/7751/irq.c | 51
arch/sh/boards/mach-se/7751/setup.c | 60
arch/sh/boards/mach-se/7780/Makefile | 11
arch/sh/boards/mach-se/7780/irq.c | 65
arch/sh/boards/mach-se/7780/setup.c | 111
arch/sh/boards/mach-se/Makefile | 11
arch/sh/boards/mach-se/board-se7619.c | 27
arch/sh/boards/mach-sh03/Makefile | 7
arch/sh/boards/mach-sh03/rtc.c | 143
arch/sh/boards/mach-sh03/setup.c | 97
arch/sh/boards/mach-sh7763rdp/Makefile | 2
arch/sh/boards/mach-sh7763rdp/irq.c | 42
arch/sh/boards/mach-sh7763rdp/setup.c | 213 -
arch/sh/boards/mach-x3proto/Makefile | 4
arch/sh/boards/mach-x3proto/gpio.c | 136
arch/sh/boards/mach-x3proto/ilsel.c | 156
arch/sh/boards/mach-x3proto/setup.c | 270 -
arch/sh/boards/of-generic.c | 172
arch/sh/boot/.gitignore | 5
arch/sh/boot/Makefile | 115
arch/sh/boot/compressed/.gitignore | 2
arch/sh/boot/compressed/Makefile | 66
arch/sh/boot/compressed/ashiftrt.S | 2
arch/sh/boot/compressed/ashldi3.c | 2
arch/sh/boot/compressed/ashlsi3.S | 2
arch/sh/boot/compressed/ashrsi3.S | 2
arch/sh/boot/compressed/cache.c | 13
arch/sh/boot/compressed/head_32.S | 126
arch/sh/boot/compressed/head_64.S | 159
arch/sh/boot/compressed/lshrsi3.S | 2
arch/sh/boot/compressed/misc.c | 146
arch/sh/boot/compressed/vmlinux.scr | 10
arch/sh/boot/dts/Makefile | 2
arch/sh/boot/dts/j2_mimas_v2.dts | 99
arch/sh/boot/romimage/Makefile | 30
arch/sh/boot/romimage/head.S | 85
arch/sh/boot/romimage/mmcif-sh7724.c | 78
arch/sh/boot/romimage/vmlinux.scr | 8
arch/sh/cchips/Kconfig | 46
arch/sh/cchips/hd6446x/Makefile | 4
arch/sh/cchips/hd6446x/hd64461.c | 112
arch/sh/configs/ap325rxa_defconfig | 103
arch/sh/configs/apsh4a3a_defconfig | 91
arch/sh/configs/apsh4ad0a_defconfig | 122
arch/sh/configs/dreamcast_defconfig | 72
arch/sh/configs/ecovec24-romimage_defconfig | 58
arch/sh/configs/ecovec24_defconfig | 132
arch/sh/configs/edosk7705_defconfig | 35
arch/sh/configs/edosk7760_defconfig | 114
arch/sh/configs/espt_defconfig | 114
arch/sh/configs/hp6xx_defconfig | 60
arch/sh/configs/j2_defconfig | 42
arch/sh/configs/kfr2r09-romimage_defconfig | 53
arch/sh/configs/kfr2r09_defconfig | 84
arch/sh/configs/landisk_defconfig | 115
arch/sh/configs/lboxre2_defconfig | 62
arch/sh/configs/magicpanelr2_defconfig | 90
arch/sh/configs/microdev_defconfig | 43
arch/sh/configs/migor_defconfig | 94
arch/sh/configs/polaris_defconfig | 83
arch/sh/configs/r7780mp_defconfig | 109
arch/sh/configs/r7785rp_defconfig | 107
arch/sh/configs/rsk7201_defconfig | 63
arch/sh/configs/rsk7203_defconfig | 121
arch/sh/configs/rsk7264_defconfig | 71
arch/sh/configs/rsk7269_defconfig | 56
arch/sh/configs/rts7751r2d1_defconfig | 91
arch/sh/configs/rts7751r2dplus_defconfig | 96
arch/sh/configs/sdk7780_defconfig | 139
arch/sh/configs/sdk7786_defconfig | 217 -
arch/sh/configs/se7206_defconfig | 108
arch/sh/configs/se7343_defconfig | 96
arch/sh/configs/se7619_defconfig | 43
arch/sh/configs/se7705_defconfig | 54
arch/sh/configs/se7712_defconfig | 101
arch/sh/configs/se7721_defconfig | 127
arch/sh/configs/se7722_defconfig | 56
arch/sh/configs/se7724_defconfig | 132
arch/sh/configs/se7750_defconfig | 55
arch/sh/configs/se7751_defconfig | 46
arch/sh/configs/se7780_defconfig | 106
arch/sh/configs/secureedge5410_defconfig | 53
arch/sh/configs/sh03_defconfig | 126
arch/sh/configs/sh2007_defconfig | 199 -
arch/sh/configs/sh7710voipgw_defconfig | 55
arch/sh/configs/sh7724_generic_defconfig | 41
arch/sh/configs/sh7757lcr_defconfig | 85
arch/sh/configs/sh7763rdp_defconfig | 116
arch/sh/configs/sh7770_generic_defconfig | 43
arch/sh/configs/sh7785lcr_32bit_defconfig | 149
arch/sh/configs/sh7785lcr_defconfig | 117
arch/sh/configs/shmin_defconfig | 52
arch/sh/configs/shx3_defconfig | 103
arch/sh/configs/titan_defconfig | 272 -
arch/sh/configs/ul2_defconfig | 84
arch/sh/configs/urquell_defconfig | 147
arch/sh/drivers/Kconfig | 20
arch/sh/drivers/Makefile | 11
arch/sh/drivers/dma/Kconfig | 74
arch/sh/drivers/dma/Makefile | 9
arch/sh/drivers/dma/dma-api.c | 417 --
arch/sh/drivers/dma/dma-g2.c | 197 -
arch/sh/drivers/dma/dma-pvr2.c | 102
arch/sh/drivers/dma/dma-sh.c | 414 --
arch/sh/drivers/dma/dma-sysfs.c | 164
arch/sh/drivers/dma/dmabrg.c | 196 -
arch/sh/drivers/heartbeat.c | 152
arch/sh/drivers/pci/Makefile | 27
arch/sh/drivers/pci/common.c | 159
arch/sh/drivers/pci/fixups-dreamcast.c | 84
arch/sh/drivers/pci/fixups-landisk.c | 57
arch/sh/drivers/pci/fixups-r7780rp.c | 18
arch/sh/drivers/pci/fixups-rts7751r2d.c | 64
arch/sh/drivers/pci/fixups-sdk7780.c | 40
arch/sh/drivers/pci/fixups-sdk7786.c | 64
arch/sh/drivers/pci/fixups-se7751.c | 113
arch/sh/drivers/pci/fixups-sh03.c | 33
arch/sh/drivers/pci/fixups-snapgear.c | 37
arch/sh/drivers/pci/fixups-titan.c | 36
arch/sh/drivers/pci/ops-dreamcast.c | 79
arch/sh/drivers/pci/ops-sh4.c | 105
arch/sh/drivers/pci/ops-sh7786.c | 168
arch/sh/drivers/pci/pci-dreamcast.c | 97
arch/sh/drivers/pci/pci-sh4.h | 182
arch/sh/drivers/pci/pci-sh7751.c | 179
arch/sh/drivers/pci/pci-sh7751.h | 126
arch/sh/drivers/pci/pci-sh7780.c | 407 --
arch/sh/drivers/pci/pci-sh7780.h | 43
arch/sh/drivers/pci/pci.c | 298 -
arch/sh/drivers/pci/pcie-sh7786.c | 609 ---
arch/sh/drivers/pci/pcie-sh7786.h | 577 ---
arch/sh/drivers/platform_early.c | 340 -
arch/sh/drivers/push-switch.c | 136
arch/sh/drivers/superhyway/Makefile | 7
arch/sh/drivers/superhyway/ops-sh4-202.c | 168
arch/sh/include/asm/Kbuild | 5
arch/sh/include/asm/adc.h | 12
arch/sh/include/asm/addrspace.h | 63
arch/sh/include/asm/alignment.h | 22
arch/sh/include/asm/asm-offsets.h | 2
arch/sh/include/asm/atomic-grb.h | 86
arch/sh/include/asm/atomic-irq.h | 72
arch/sh/include/asm/atomic-llsc.h | 88
arch/sh/include/asm/atomic.h | 38
arch/sh/include/asm/barrier.h | 45
arch/sh/include/asm/bitops-cas.h | 94
arch/sh/include/asm/bitops-grb.h | 173
arch/sh/include/asm/bitops-llsc.h | 147
arch/sh/include/asm/bitops-op32.h | 143
arch/sh/include/asm/bitops.h | 72
arch/sh/include/asm/bl_bit.h | 2
arch/sh/include/asm/bl_bit_32.h | 34
arch/sh/include/asm/bug.h | 121
arch/sh/include/asm/bugs.h | 74
arch/sh/include/asm/cache.h | 46
arch/sh/include/asm/cache_insns.h | 2
arch/sh/include/asm/cache_insns_32.h | 22
arch/sh/include/asm/cacheflush.h | 106
arch/sh/include/asm/checksum.h | 2
arch/sh/include/asm/checksum_32.h | 203 -
arch/sh/include/asm/clock.h | 17
arch/sh/include/asm/cmpxchg-cas.h | 25
arch/sh/include/asm/cmpxchg-grb.h | 95
arch/sh/include/asm/cmpxchg-irq.h | 54
arch/sh/include/asm/cmpxchg-llsc.h | 53
arch/sh/include/asm/cmpxchg-xchg.h | 50
arch/sh/include/asm/cmpxchg.h | 74
arch/sh/include/asm/device.h | 17
arch/sh/include/asm/dma-register.h | 50
arch/sh/include/asm/dma.h | 140
arch/sh/include/asm/dmabrg.h | 24
arch/sh/include/asm/dwarf.h | 417 --
arch/sh/include/asm/elf.h | 211 -
arch/sh/include/asm/entry-macros.S | 123
arch/sh/include/asm/extable.h | 7
arch/sh/include/asm/fb.h | 20
arch/sh/include/asm/fixmap.h | 86
arch/sh/include/asm/flat.h | 33
arch/sh/include/asm/fpu.h | 69
arch/sh/include/asm/freq.h | 12
arch/sh/include/asm/ftrace.h | 48
arch/sh/include/asm/futex-cas.h | 35
arch/sh/include/asm/futex-irq.h | 25
arch/sh/include/asm/futex-llsc.h | 42
arch/sh/include/asm/futex.h | 72
arch/sh/include/asm/gpio.h | 50
arch/sh/include/asm/hardirq.h | 11
arch/sh/include/asm/hd64461.h | 252 -
arch/sh/include/asm/heartbeat.h | 19
arch/sh/include/asm/hugetlb.h | 38
arch/sh/include/asm/hw_breakpoint.h | 70
arch/sh/include/asm/hw_irq.h | 36
arch/sh/include/asm/i2c-sh7760.h | 21
arch/sh/include/asm/io.h | 294 -
arch/sh/include/asm/io_generic.h | 19
arch/sh/include/asm/io_noioport.h | 86
arch/sh/include/asm/io_trapped.h | 59
arch/sh/include/asm/irq.h | 58
arch/sh/include/asm/irqflags.h | 10
arch/sh/include/asm/kdebug.h | 19
arch/sh/include/asm/kexec.h | 72
arch/sh/include/asm/kgdb.h | 38
arch/sh/include/asm/kprobes.h | 57
arch/sh/include/asm/linkage.h | 8
arch/sh/include/asm/machvec.h | 41
arch/sh/include/asm/mmiowb.h | 12
arch/sh/include/asm/mmu.h | 107
arch/sh/include/asm/mmu_context.h | 178
arch/sh/include/asm/mmu_context_32.h | 51
arch/sh/include/asm/mmzone.h | 45
arch/sh/include/asm/module.h | 14
arch/sh/include/asm/page.h | 186
arch/sh/include/asm/pci.h | 91
arch/sh/include/asm/perf_event.h | 30
arch/sh/include/asm/pgalloc.h | 40
arch/sh/include/asm/pgtable-2level.h | 24
arch/sh/include/asm/pgtable-3level.h | 59
arch/sh/include/asm/pgtable.h | 150
arch/sh/include/asm/pgtable_32.h | 462 --
arch/sh/include/asm/platform_early.h | 61
arch/sh/include/asm/posix_types.h | 2
arch/sh/include/asm/processor.h | 173
arch/sh/include/asm/processor_32.h | 202 -
arch/sh/include/asm/ptrace.h | 139
arch/sh/include/asm/ptrace_32.h | 14
arch/sh/include/asm/push-switch.h | 32
arch/sh/include/asm/reboot.h | 22
arch/sh/include/asm/romimage-macros.h | 74
arch/sh/include/asm/rtc.h | 15
arch/sh/include/asm/seccomp.h | 21
arch/sh/include/asm/sections.h | 12
arch/sh/include/asm/setup.h | 25
arch/sh/include/asm/sfp-machine.h | 80
arch/sh/include/asm/sh7760fb.h | 198 -
arch/sh/include/asm/sh_bios.h | 28
arch/sh/include/asm/shmparam.h | 19
arch/sh/include/asm/siu.h | 20
arch/sh/include/asm/smc37c93x.h | 191 -
arch/sh/include/asm/smp-ops.h | 52
arch/sh/include/asm/smp.h | 83
arch/sh/include/asm/sparsemem.h | 12
arch/sh/include/asm/spi.h | 14
arch/sh/include/asm/spinlock-cas.h | 89
arch/sh/include/asm/spinlock-llsc.h | 198 -
arch/sh/include/asm/spinlock.h | 19
arch/sh/include/asm/spinlock_types.h | 22
arch/sh/include/asm/sram.h | 39
arch/sh/include/asm/stackprotector.h | 21
arch/sh/include/asm/stacktrace.h | 21
arch/sh/include/asm/string.h | 2
arch/sh/include/asm/string_32.h | 102
arch/sh/include/asm/suspend.h | 97
arch/sh/include/asm/switch_to.h | 7
arch/sh/include/asm/switch_to_32.h | 131
arch/sh/include/asm/syscall.h | 9
arch/sh/include/asm/syscall_32.h | 69
arch/sh/include/asm/syscalls.h | 14
arch/sh/include/asm/syscalls_32.h | 27
arch/sh/include/asm/thread_info.h | 171
arch/sh/include/asm/timex.h | 24
arch/sh/include/asm/tlb.h | 29
arch/sh/include/asm/tlbflush.h | 52
arch/sh/include/asm/topology.h | 28
arch/sh/include/asm/traps.h | 18
arch/sh/include/asm/traps_32.h | 61
arch/sh/include/asm/types.h | 16
arch/sh/include/asm/uaccess.h | 133
arch/sh/include/asm/uaccess_32.h | 227 -
arch/sh/include/asm/uncached.h | 59
arch/sh/include/asm/unistd.h | 31
arch/sh/include/asm/unwinder.h | 32
arch/sh/include/asm/user.h | 55
arch/sh/include/asm/vermagic.h | 30
arch/sh/include/asm/vga.h | 7
arch/sh/include/asm/vmalloc.h | 4
arch/sh/include/asm/vmlinux.lds.h | 18
arch/sh/include/asm/watchdog.h | 159
arch/sh/include/asm/word-at-a-time.h | 54
arch/sh/include/cpu-common/cpu/addrspace.h | 16
arch/sh/include/cpu-common/cpu/mmu_context.h | 13
arch/sh/include/cpu-common/cpu/pfc.h | 18
arch/sh/include/cpu-common/cpu/rtc.h | 9
arch/sh/include/cpu-common/cpu/sigcontext.h | 18
arch/sh/include/cpu-common/cpu/timer.h | 7
arch/sh/include/cpu-sh2/cpu/cache.h | 40
arch/sh/include/cpu-sh2/cpu/freq.h | 15
arch/sh/include/cpu-sh2/cpu/watchdog.h | 66
arch/sh/include/cpu-sh2a/cpu/addrspace.h | 11
arch/sh/include/cpu-sh2a/cpu/cache.h | 40
arch/sh/include/cpu-sh2a/cpu/freq.h | 13
arch/sh/include/cpu-sh2a/cpu/rtc.h | 9
arch/sh/include/cpu-sh2a/cpu/sh7203.h | 144
arch/sh/include/cpu-sh2a/cpu/sh7264.h | 169
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 213 -
arch/sh/include/cpu-sh2a/cpu/watchdog.h | 2
arch/sh/include/cpu-sh3/cpu/adc.h | 29
arch/sh/include/cpu-sh3/cpu/cache.h | 40
arch/sh/include/cpu-sh3/cpu/dac.h | 42
arch/sh/include/cpu-sh3/cpu/dma-register.h | 38
arch/sh/include/cpu-sh3/cpu/dma.h | 19
arch/sh/include/cpu-sh3/cpu/freq.h | 24
arch/sh/include/cpu-sh3/cpu/gpio.h | 78
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 42
arch/sh/include/cpu-sh3/cpu/serial.h | 11
arch/sh/include/cpu-sh3/cpu/sh7720.h | 175
arch/sh/include/cpu-sh3/cpu/watchdog.h | 22
arch/sh/include/cpu-sh4/cpu/addrspace.h | 41
arch/sh/include/cpu-sh4/cpu/cache.h | 41
arch/sh/include/cpu-sh4/cpu/dma-register.h | 98
arch/sh/include/cpu-sh4/cpu/dma.h | 18
arch/sh/include/cpu-sh4/cpu/fpu.h | 30
arch/sh/include/cpu-sh4/cpu/freq.h | 74
arch/sh/include/cpu-sh4/cpu/mmu_context.h | 79
arch/sh/include/cpu-sh4/cpu/rtc.h | 14
arch/sh/include/cpu-sh4/cpu/sh7722.h | 252 -
arch/sh/include/cpu-sh4/cpu/sh7723.h | 285 -
arch/sh/include/cpu-sh4/cpu/sh7724.h | 319 -
arch/sh/include/cpu-sh4/cpu/sh7734.h | 307 -
arch/sh/include/cpu-sh4/cpu/sh7757.h | 290 -
arch/sh/include/cpu-sh4/cpu/sh7785.h | 260 -
arch/sh/include/cpu-sh4/cpu/sh7786.h | 138
arch/sh/include/cpu-sh4/cpu/shx3.h | 65
arch/sh/include/cpu-sh4/cpu/sigcontext.h | 25
arch/sh/include/cpu-sh4/cpu/sq.h | 33
arch/sh/include/cpu-sh4/cpu/watchdog.h | 41
arch/sh/include/cpu-sh4a/cpu/dma.h | 72
arch/sh/include/cpu-sh4a/cpu/serial.h | 8
arch/sh/include/mach-common/mach/highlander.h | 208 -
arch/sh/include/mach-common/mach/hp6xx.h | 59
arch/sh/include/mach-common/mach/lboxre2.h | 24
arch/sh/include/mach-common/mach/magicpanelr2.h | 64
arch/sh/include/mach-common/mach/mangle-port.h | 46
arch/sh/include/mach-common/mach/microdev.h | 69
arch/sh/include/mach-common/mach/r2d.h | 71
arch/sh/include/mach-common/mach/romimage.h | 12
arch/sh/include/mach-common/mach/sdk7780.h | 79
arch/sh/include/mach-common/mach/secureedge5410.h | 47
arch/sh/include/mach-common/mach/sh2007.h | 118
arch/sh/include/mach-common/mach/sh7763rdp.h | 50
arch/sh/include/mach-common/mach/sh7785lcr.h | 58
arch/sh/include/mach-common/mach/shmin.h | 10
arch/sh/include/mach-common/mach/titan.h | 20
arch/sh/include/mach-common/mach/urquell.h | 69
arch/sh/include/mach-dreamcast/mach/dma.h | 29
arch/sh/include/mach-dreamcast/mach/maple.h | 38
arch/sh/include/mach-dreamcast/mach/pci.h | 24
arch/sh/include/mach-dreamcast/mach/sysasic.h | 46
arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt | 82
arch/sh/include/mach-ecovec24/mach/romimage.h | 48
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 24
arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt | 144
arch/sh/include/mach-kfr2r09/mach/romimage.h | 31
arch/sh/include/mach-landisk/mach/gio.h | 38
arch/sh/include/mach-landisk/mach/iodata_landisk.h | 46
arch/sh/include/mach-migor/mach/migor.h | 16
arch/sh/include/mach-sdk7786/mach/fpga.h | 156
arch/sh/include/mach-sdk7786/mach/irq.h | 8
arch/sh/include/mach-se/mach/mrshpc.h | 53
arch/sh/include/mach-se/mach/se.h | 120
arch/sh/include/mach-se/mach/se7206.h | 14
arch/sh/include/mach-se/mach/se7343.h | 143
arch/sh/include/mach-se/mach/se7721.h | 68
arch/sh/include/mach-se/mach/se7722.h | 98
arch/sh/include/mach-se/mach/se7724.h | 69
arch/sh/include/mach-se/mach/se7751.h | 75
arch/sh/include/mach-se/mach/se7780.h | 106
arch/sh/include/mach-sh03/mach/io.h | 26
arch/sh/include/mach-sh03/mach/sh03.h | 19
arch/sh/include/mach-x3proto/mach/hardware.h | 13
arch/sh/include/mach-x3proto/mach/ilsel.h | 46
arch/sh/include/uapi/asm/Kbuild | 4
arch/sh/include/uapi/asm/auxvec.h | 39
arch/sh/include/uapi/asm/byteorder.h | 11
arch/sh/include/uapi/asm/cachectl.h | 20
arch/sh/include/uapi/asm/cpu-features.h | 28
arch/sh/include/uapi/asm/hw_breakpoint.h | 5
arch/sh/include/uapi/asm/ioctls.h | 116
arch/sh/include/uapi/asm/posix_types.h | 2
arch/sh/include/uapi/asm/posix_types_32.h | 23
arch/sh/include/uapi/asm/ptrace.h | 30
arch/sh/include/uapi/asm/ptrace_32.h | 78
arch/sh/include/uapi/asm/sigcontext.h | 25
arch/sh/include/uapi/asm/signal.h | 18
arch/sh/include/uapi/asm/sockios.h | 18
arch/sh/include/uapi/asm/stat.h | 78
arch/sh/include/uapi/asm/swab.h | 50
arch/sh/include/uapi/asm/unistd.h | 2
arch/sh/kernel/.gitignore | 2
arch/sh/kernel/Makefile | 49
arch/sh/kernel/asm-offsets.c | 60
arch/sh/kernel/cpu/Makefile | 21
arch/sh/kernel/cpu/adc.c | 37
arch/sh/kernel/cpu/clock-cpg.c | 78
arch/sh/kernel/cpu/clock.c | 52
arch/sh/kernel/cpu/fpu.c | 92
arch/sh/kernel/cpu/init.c | 366 -
arch/sh/kernel/cpu/irq/Makefile | 6
arch/sh/kernel/cpu/irq/imask.c | 85
arch/sh/kernel/cpu/irq/ipr.c | 80
arch/sh/kernel/cpu/pfc.c | 25
arch/sh/kernel/cpu/proc.c | 151
arch/sh/kernel/cpu/sh2/Makefile | 12
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74
arch/sh/kernel/cpu/sh2/entry.S | 373 -
arch/sh/kernel/cpu/sh2/ex.S | 44
arch/sh/kernel/cpu/sh2/probe.c | 71
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 -
arch/sh/kernel/cpu/sh2/smp-j2.c | 136
arch/sh/kernel/cpu/sh2a/Makefile | 25
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 82
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 78
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 80
arch/sh/kernel/cpu/sh2a/clock-sh7264.c | 157
arch/sh/kernel/cpu/sh2a/clock-sh7269.c | 181
arch/sh/kernel/cpu/sh2a/entry.S | 247 -
arch/sh/kernel/cpu/sh2a/ex.S | 70
arch/sh/kernel/cpu/sh2a/fpu.c | 572 ---
arch/sh/kernel/cpu/sh2a/opcode_helper.c | 51
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 27
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 27
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 28
arch/sh/kernel/cpu/sh2a/probe.c | 57
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 175
arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 418 --
arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 355 -
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 291 -
arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 552 --
arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 568 --
arch/sh/kernel/cpu/sh3/Makefile | 34
arch/sh/kernel/cpu/sh3/clock-sh3.c | 86
arch/sh/kernel/cpu/sh3/clock-sh7705.c | 81
arch/sh/kernel/cpu/sh3/clock-sh7706.c | 81
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 82
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 75
arch/sh/kernel/cpu/sh3/clock-sh7712.c | 68
arch/sh/kernel/cpu/sh3/entry.S | 509 --
arch/sh/kernel/cpu/sh3/ex.S | 56
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 27
arch/sh/kernel/cpu/sh3/probe.c | 108
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 34
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 21
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 38
arch/sh/kernel/cpu/sh3/setup-sh3.c | 69
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 190
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 246 -
arch/sh/kernel/cpu/sh3/setup-sh7710.c | 189
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 286 -
arch/sh/kernel/cpu/sh3/swsusp.S | 144
arch/sh/kernel/cpu/sh4/Makefile | 37
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174
arch/sh/kernel/cpu/sh4/clock-sh4.c | 77
arch/sh/kernel/cpu/sh4/fpu.c | 425 --
arch/sh/kernel/cpu/sh4/perf_event.c | 265 -
arch/sh/kernel/cpu/sh4/probe.c | 260 -
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 359 -
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 297 -
arch/sh/kernel/cpu/sh4/softfloat.c | 930 ----
arch/sh/kernel/cpu/sh4/sq.c | 414 --
arch/sh/kernel/cpu/sh4a/Makefile | 53
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 277 -
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 270 -
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 253 -
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 301 -
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 367 -
arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 256 -
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 152
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 116
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 70
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 122
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 174
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 189
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 148
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 31
arch/sh/kernel/cpu/sh4a/perf_event.c | 299 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 21
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 27
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 27
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 32
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 26
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 24
arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 444 --
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 388 --
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 666 ---
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 644 ---
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 1288 ------
arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 621 ---
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 1242 ------
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 455 --
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 571 ---
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 505 --
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 608 ---
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 841 ----
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 396 --
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 146
arch/sh/kernel/cpu/sh4a/ubc.c | 130
arch/sh/kernel/cpu/shmobile/Makefile | 8
arch/sh/kernel/cpu/shmobile/cpuidle.c | 95
arch/sh/kernel/cpu/shmobile/pm.c | 153
arch/sh/kernel/cpu/shmobile/sleep.S | 402 --
arch/sh/kernel/crash_dump.c | 27
arch/sh/kernel/debugtraps.S | 38
arch/sh/kernel/disassemble.c | 572 ---
arch/sh/kernel/dma-coherent.c | 33
arch/sh/kernel/dumpstack.c | 156
arch/sh/kernel/dwarf.c | 1206 ------
arch/sh/kernel/entry-common.S | 400 --
arch/sh/kernel/ftrace.c | 365 -
arch/sh/kernel/head_32.S | 365 -
arch/sh/kernel/hw_breakpoint.c | 408 --
arch/sh/kernel/idle.c | 57
arch/sh/kernel/io.c | 111
arch/sh/kernel/io_trapped.c | 291 -
arch/sh/kernel/iomap.c | 162
arch/sh/kernel/ioport.c | 41
arch/sh/kernel/irq.c | 249 -
arch/sh/kernel/irq_32.c | 54
arch/sh/kernel/kdebugfs.c | 14
arch/sh/kernel/kgdb.c | 378 -
arch/sh/kernel/kprobes.c | 452 --
arch/sh/kernel/machine_kexec.c | 204 -
arch/sh/kernel/machvec.c | 122
arch/sh/kernel/module.c | 104
arch/sh/kernel/nmi_debug.c | 75
arch/sh/kernel/perf_callchain.c | 32
arch/sh/kernel/perf_event.c | 363 -
arch/sh/kernel/process.c | 77
arch/sh/kernel/process_32.c | 197 -
arch/sh/kernel/ptrace.c | 34
arch/sh/kernel/ptrace_32.c | 487 --
arch/sh/kernel/reboot.c | 96
arch/sh/kernel/relocate_kernel.S | 230 -
arch/sh/kernel/return_address.c | 56
arch/sh/kernel/setup.c | 356 -
arch/sh/kernel/sh_bios.c | 169
arch/sh/kernel/sh_ksyms_32.c | 118
arch/sh/kernel/signal_32.c | 507 --
arch/sh/kernel/smp.c | 471 --
arch/sh/kernel/stacktrace.c | 79
arch/sh/kernel/swsusp.c | 35
arch/sh/kernel/sys_sh.c | 96
arch/sh/kernel/sys_sh32.c | 61
arch/sh/kernel/syscalls/Makefile | 32
arch/sh/kernel/syscalls/syscall.tbl | 455 --
arch/sh/kernel/syscalls_32.S | 17
arch/sh/kernel/time.c | 45
arch/sh/kernel/topology.c | 74
arch/sh/kernel/traps.c | 204 -
arch/sh/kernel/traps_32.c | 795 ----
arch/sh/kernel/unwinder.c | 165
arch/sh/kernel/vmlinux.lds.S | 82
arch/sh/kernel/vsyscall/.gitignore | 2
arch/sh/kernel/vsyscall/Makefile | 36
arch/sh/kernel/vsyscall/vsyscall-note.S | 26
arch/sh/kernel/vsyscall/vsyscall-sigreturn.S | 75
arch/sh/kernel/vsyscall/vsyscall-syscall.S | 11
arch/sh/kernel/vsyscall/vsyscall-trapa.S | 40
arch/sh/kernel/vsyscall/vsyscall.c | 93
arch/sh/kernel/vsyscall/vsyscall.lds.S | 85
arch/sh/lib/Makefile | 32
arch/sh/lib/__clear_user.S | 109
arch/sh/lib/ashiftrt.S | 128
arch/sh/lib/ashldi3.c | 30
arch/sh/lib/ashlsi3.S | 189
arch/sh/lib/ashrdi3.c | 32
arch/sh/lib/ashrsi3.S | 179
arch/sh/lib/checksum.S | 365 -
arch/sh/lib/copy_page.S | 390 --
arch/sh/lib/delay.c | 54
arch/sh/lib/div64-generic.c | 20
arch/sh/lib/div64.S | 47
arch/sh/lib/io.c | 79
arch/sh/lib/libgcc.h | 27
arch/sh/lib/lshrdi3.c | 30
arch/sh/lib/lshrsi3.S | 188
arch/sh/lib/mcount.S | 287 -
arch/sh/lib/memchr.S | 27
arch/sh/lib/memcpy-sh4.S | 800 ----
arch/sh/lib/memcpy.S | 228 -
arch/sh/lib/memmove.S | 255 -
arch/sh/lib/memset-sh4.S | 108
arch/sh/lib/memset.S | 59
arch/sh/lib/movmem.S | 217 -
arch/sh/lib/strlen.S | 71
arch/sh/lib/udiv_qrnnd.S | 60
arch/sh/lib/udivsi3.S | 66
arch/sh/lib/udivsi3_i4i-Os.S | 128
arch/sh/lib/udivsi3_i4i.S | 645 ---
arch/sh/math-emu/Makefile | 2
arch/sh/math-emu/math.c | 506 --
arch/sh/math-emu/sfp-util.h | 73
arch/sh/mm/Kconfig | 254 -
arch/sh/mm/Makefile | 45
arch/sh/mm/alignment.c | 189
arch/sh/mm/asids-debugfs.c | 59
arch/sh/mm/cache-debugfs.c | 109
arch/sh/mm/cache-j2.c | 64
arch/sh/mm/cache-sh2.c | 90
arch/sh/mm/cache-sh2a.c | 188
arch/sh/mm/cache-sh3.c | 102
arch/sh/mm/cache-sh4.c | 390 --
arch/sh/mm/cache-sh7705.c | 194 -
arch/sh/mm/cache-shx3.c | 44
arch/sh/mm/cache.c | 360 -
arch/sh/mm/consistent.c | 65
arch/sh/mm/extable_32.c | 24
arch/sh/mm/fault.c | 504 --
arch/sh/mm/flush-sh4.c | 111
arch/sh/mm/hugetlbpage.c | 82
arch/sh/mm/init.c | 424 --
arch/sh/mm/ioremap.c | 192 -
arch/sh/mm/ioremap.h | 23
arch/sh/mm/ioremap_fixed.c | 135
arch/sh/mm/kmap.c | 65
arch/sh/mm/mmap.c | 184
arch/sh/mm/nommu.c | 98
arch/sh/mm/numa.c | 56
arch/sh/mm/pgtable.c | 57
arch/sh/mm/pmb.c | 887 ----
arch/sh/mm/sram.c | 35
arch/sh/mm/tlb-debugfs.c | 160
arch/sh/mm/tlb-pteaex.c | 106
arch/sh/mm/tlb-sh3.c | 95
arch/sh/mm/tlb-sh4.c | 108
arch/sh/mm/tlb-urb.c | 93
arch/sh/mm/tlbex_32.c | 82
arch/sh/mm/tlbflush_32.c | 137
arch/sh/mm/uncached.c | 44
arch/sh/tools/Makefile | 16
arch/sh/tools/gen-mach-types | 48
arch/sh/tools/mach-types | 67
b/Documentation/arch.rst | 1
b/Documentation/watchdog/watchdog-parameters.rst | 12
b/MAINTAINERS | 10
b/drivers/Makefile | 1
b/drivers/base/platform.c | 4
b/drivers/clocksource/sh_cmt.c | 16
b/drivers/clocksource/sh_mtu2.c | 16
b/drivers/clocksource/sh_tmu.c | 17
b/drivers/cpufreq/Kconfig | 14
b/drivers/cpufreq/Makefile | 1
b/drivers/dma/sh/Kconfig | 20
b/drivers/dma/sh/Makefile | 13
b/drivers/gpu/drm/Kconfig | 2
b/drivers/gpu/drm/Makefile | 1
b/drivers/i2c/busses/Kconfig | 13
b/drivers/i2c/busses/Makefile | 1
b/drivers/input/keyboard/Kconfig | 10
b/drivers/input/keyboard/Makefile | 1
b/drivers/media/platform/renesas/Kconfig | 11
b/drivers/media/platform/renesas/Makefile | 1
b/drivers/mmc/host/Kconfig | 6
b/drivers/mmc/host/sh_mmcif.c | 21
b/drivers/mtd/nand/raw/Kconfig | 8
b/drivers/mtd/nand/raw/Makefile | 1
b/drivers/net/ethernet/8390/Kconfig | 14
b/drivers/net/ethernet/8390/Makefile | 1
b/drivers/net/ethernet/renesas/Kconfig | 2
b/drivers/net/ethernet/smsc/Kconfig | 4
b/drivers/pinctrl/renesas/Kconfig | 63
b/drivers/pinctrl/renesas/Makefile | 27
b/drivers/pinctrl/renesas/core.c | 598 ---
b/drivers/rtc/Kconfig | 4
b/drivers/rtc/rtc-sh.c | 18
b/drivers/spi/Kconfig | 24
b/drivers/spi/Makefile | 3
b/drivers/tty/serial/Kconfig | 3
b/drivers/tty/serial/sh-sci.c | 57
b/drivers/tty/vt/keyboard.c | 2
b/drivers/usb/host/Kconfig | 18
b/drivers/usb/host/ehci-hcd.c | 7
b/drivers/usb/renesas_usbhs/Kconfig | 2
b/drivers/video/console/Kconfig | 2
b/drivers/video/fbdev/Kconfig | 17
b/drivers/video/fbdev/Makefile | 1
b/drivers/video/logo/Kconfig | 15
b/drivers/video/logo/Makefile | 3
b/drivers/video/logo/logo.c | 12
b/drivers/watchdog/Kconfig | 20
b/drivers/watchdog/Makefile | 3
b/fs/Kconfig.binfmt | 2
b/fs/minix/Kconfig | 2
b/include/linux/cpuhotplug.h | 1
b/include/linux/platform_device.h | 15
b/include/linux/sh_intc.h | 4
b/include/linux/shdma-base.h | 4
b/init/Kconfig | 2
b/kernel/sysctl.c | 3
b/lib/Kconfig.debug | 2
b/lib/math/div64.c | 4
b/lib/test_user_copy.c | 3
b/scripts/coccinelle/misc/cond_no_effect.cocci | 13
b/scripts/head-object-list.txt | 1
b/sound/Kconfig | 2
b/sound/Makefile | 2
b/sound/soc/sh/Kconfig | 48
b/sound/soc/sh/Makefile | 16
b/sound/soc/sh/fsi.c | 9
b/tools/include/asm/barrier.h | 2
b/tools/perf/util/dwarf-regs.c | 1
drivers/cpufreq/sh-cpufreq.c | 175
drivers/dma/sh/shdma-base.c | 1052 -----
drivers/dma/sh/shdma.h | 61
drivers/dma/sh/shdmac.c | 938 ----
drivers/gpu/drm/shmobile/Kconfig | 12
drivers/gpu/drm/shmobile/Makefile | 8
drivers/gpu/drm/shmobile/shmob_drm_backlight.c | 82
drivers/gpu/drm/shmobile/shmob_drm_backlight.h | 19
drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ---
drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55
drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 -
drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42
drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150
drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29
drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -
drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19
drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 -
drivers/i2c/busses/i2c-sh7760.c | 565 --
drivers/input/keyboard/sh_keysc.c | 334 -
drivers/media/platform/renesas/sh_vou.c | 1375 -------
drivers/mtd/nand/raw/sh_flctl.c | 1234 ------
drivers/net/ethernet/8390/stnic.c | 302 -
drivers/pinctrl/renesas/pfc-sh7203.c | 1577 --------
drivers/pinctrl/renesas/pfc-sh7264.c | 2131 -----------
drivers/pinctrl/renesas/pfc-sh7269.c | 2851 ---------------
drivers/pinctrl/renesas/pfc-sh7720.c | 1201 ------
drivers/pinctrl/renesas/pfc-sh7722.c | 1703 --------
drivers/pinctrl/renesas/pfc-sh7723.c | 1902 ----------
drivers/pinctrl/renesas/pfc-sh7724.c | 2177 -----------
drivers/pinctrl/renesas/pfc-sh7734.c | 2408 ------------
drivers/pinctrl/renesas/pfc-sh7757.c | 2219 -----------
drivers/pinctrl/renesas/pfc-sh7785.c | 1258 ------
drivers/pinctrl/renesas/pfc-sh7786.c | 809 ----
drivers/pinctrl/renesas/pfc-shx3.c | 557 --
drivers/sh/Kconfig | 6
drivers/sh/Makefile | 12
drivers/sh/clk/Makefile | 4
drivers/sh/clk/core.c | 624 ---
drivers/sh/clk/cpg.c | 477 --
drivers/sh/intc/Kconfig | 44
drivers/sh/intc/Makefile | 6
drivers/sh/intc/access.c | 246 -
drivers/sh/intc/balancing.c | 97
drivers/sh/intc/chip.c | 211 -
drivers/sh/intc/core.c | 501 --
drivers/sh/intc/handle.c | 306 -
drivers/sh/intc/internals.h | 191 -
drivers/sh/intc/irqdomain.c | 68
drivers/sh/intc/userimask.c | 84
drivers/sh/intc/virq-debugfs.c | 54
drivers/sh/intc/virq.c | 269 -
drivers/sh/maple/Makefile | 4
drivers/sh/maple/maple.c | 895 ----
drivers/sh/pm_runtime.c | 40
drivers/sh/superhyway/Makefile | 8
drivers/sh/superhyway/superhyway-sysfs.c | 54
drivers/sh/superhyway/superhyway.c | 234 -
drivers/spi/spi-jcore.c | 235 -
drivers/spi/spi-sh-sci.c | 197 -
drivers/spi/spi-sh.c | 474 --
drivers/usb/host/ehci-sh.c | 182
drivers/video/fbdev/sh7760fb.c | 587 ---
drivers/video/logo/logo_superh_clut224.ppm | 1604 --------
drivers/video/logo/logo_superh_vga16.ppm | 1604 --------
drivers/watchdog/shwdt.c | 344 -
include/linux/mtd/sh_flctl.h | 180
include/linux/sh_clk.h | 213 -
include/linux/superhyway.h | 107
sound/sh/Kconfig | 32
sound/sh/Makefile | 11
sound/sh/aica.c | 628 ---
sound/sh/aica.h | 68
sound/sh/sh_dac_audio.c | 412 --
sound/soc/sh/dma-sh7760.c | 334 -
sound/soc/sh/hac.c | 345 -
sound/soc/sh/migor.c | 205 -
sound/soc/sh/sh7760-ac97.c | 72
sound/soc/sh/siu.h | 180
sound/soc/sh/siu_dai.c | 799 ----
sound/soc/sh/siu_pcm.c | 553 --
sound/soc/sh/ssi.c | 403 --
896 files changed, 46 insertions(+), 138518 deletions(-)
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
set for each/sh, making the driver dead code except for the COMPILE_TEST
case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/gpu/drm/Kconfig | 2 -
drivers/gpu/drm/Makefile | 1 -
drivers/gpu/drm/shmobile/Kconfig | 12 -
drivers/gpu/drm/shmobile/Makefile | 8 -
.../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
.../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
15 files changed, 1976 deletions(-)
delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
delete mode 100644 drivers/gpu/drm/shmobile/Makefile
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 315cbdf6197927..1cb4bcb0714c87 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -286,8 +286,6 @@ source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
-source "drivers/gpu/drm/shmobile/Kconfig"
-
source "drivers/gpu/drm/sun4i/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index cc637343d87b09..87709cf7db8145 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -160,7 +160,6 @@ obj-$(CONFIG_DRM_AST) += ast/
obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
obj-y += rcar-du/
-obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-y += omapdrm/
obj-$(CONFIG_DRM_SUN4I) += sun4i/
obj-y += tilcdc/
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
deleted file mode 100644
index 4ec5dc74a6b0b8..00000000000000
--- a/drivers/gpu/drm/shmobile/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config DRM_SHMOBILE
- tristate "DRM Support for SH Mobile"
- depends on DRM && ARM
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select BACKLIGHT_CLASS_DEVICE
- select DRM_KMS_HELPER
- select DRM_GEM_DMA_HELPER
- help
- Choose this option if you have an SH Mobile chipset.
- If M is selected the module will be called shmob-drm.
-
diff --git a/drivers/gpu/drm/shmobile/Makefile b/drivers/gpu/drm/shmobile/Makefile
deleted file mode 100644
index 861edafed8562c..00000000000000
--- a/drivers/gpu/drm/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-shmob-drm-y := shmob_drm_backlight.o \
- shmob_drm_crtc.o \
- shmob_drm_drv.o \
- shmob_drm_kms.o \
- shmob_drm_plane.o
-
-obj-$(CONFIG_DRM_SHMOBILE) += shmob-drm.o
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c b/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
deleted file mode 100644
index 794573badfe860..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_backlight.c -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-
-static int shmob_drm_backlight_update(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- int brightness = backlight_get_brightness(bdev);
-
- return bdata->set_brightness(brightness);
-}
-
-static int shmob_drm_backlight_get_brightness(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
-
- return bdata->get_brightness();
-}
-
-static const struct backlight_ops shmob_drm_backlight_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .update_status = shmob_drm_backlight_update,
- .get_brightness = shmob_drm_backlight_get_brightness,
-};
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode)
-{
- if (scon->backlight == NULL)
- return;
-
- scon->backlight->props.power = mode == DRM_MODE_DPMS_ON
- ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
- backlight_update_status(scon->backlight);
-}
-
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon)
-{
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- struct drm_connector *connector = &scon->connector;
- struct drm_device *dev = connector->dev;
- struct backlight_device *backlight;
-
- if (!bdata->max_brightness)
- return 0;
-
- backlight = backlight_device_register(bdata->name, dev->dev, scon,
- &shmob_drm_backlight_ops, NULL);
- if (IS_ERR(backlight)) {
- dev_err(dev->dev, "unable to register backlight device: %ld\n",
- PTR_ERR(backlight));
- return PTR_ERR(backlight);
- }
-
- backlight->props.max_brightness = bdata->max_brightness;
- backlight->props.brightness = bdata->max_brightness;
- backlight->props.power = FB_BLANK_POWERDOWN;
- backlight_update_status(backlight);
-
- scon->backlight = backlight;
- return 0;
-}
-
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon)
-{
- backlight_device_unregister(scon->backlight);
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h b/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
deleted file mode 100644
index d9abb7a60be5c4..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_backlight.h -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_BACKLIGHT_H__
-#define __SHMOB_DRM_BACKLIGHT_H__
-
-struct shmob_drm_connector;
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode);
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon);
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon);
-
-#endif /* __SHMOB_DRM_BACKLIGHT_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
deleted file mode 100644
index 4624c0aff51ffa..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
+++ /dev/null
@@ -1,683 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_crtc.c -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-#include <linux/clk.h>
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/*
- * TODO: panel support
- */
-
-/* -----------------------------------------------------------------------------
- * Clock management
- */
-
-static int shmob_drm_clk_on(struct shmob_drm_device *sdev)
-{
- int ret;
-
- if (sdev->clock) {
- ret = clk_prepare_enable(sdev->clock);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static void shmob_drm_clk_off(struct shmob_drm_device *sdev)
-{
- if (sdev->clock)
- clk_disable_unprepare(sdev->clock);
-}
-
-/* -----------------------------------------------------------------------------
- * CRTC
- */
-
-static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct drm_display_mode *mode = &crtc->mode;
- u32 value;
-
- value = sdev->ldmt1r
- | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : LDMT1R_VPOL)
- | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : LDMT1R_HPOL)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWPOL) ? LDMT1R_DWPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DIPOL) ? LDMT1R_DIPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DAPOL) ? LDMT1R_DAPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_HSCNT) ? LDMT1R_HSCNT : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWCNT) ? LDMT1R_DWCNT : 0);
- lcdc_write(sdev, LDMT1R, value);
-
- if (idata->interface >= SHMOB_DRM_IFACE_SYS8A &&
- idata->interface <= SHMOB_DRM_IFACE_SYS24) {
- /* Setup SYS bus. */
- value = (idata->sys.cs_setup << LDMT2R_CSUP_SHIFT)
- | (idata->sys.vsync_active_high ? LDMT2R_RSV : 0)
- | (idata->sys.vsync_dir_input ? LDMT2R_VSEL : 0)
- | (idata->sys.write_setup << LDMT2R_WCSC_SHIFT)
- | (idata->sys.write_cycle << LDMT2R_WCEC_SHIFT)
- | (idata->sys.write_strobe << LDMT2R_WCLW_SHIFT);
- lcdc_write(sdev, LDMT2R, value);
-
- value = (idata->sys.read_latch << LDMT3R_RDLC_SHIFT)
- | (idata->sys.read_setup << LDMT3R_RCSC_SHIFT)
- | (idata->sys.read_cycle << LDMT3R_RCEC_SHIFT)
- | (idata->sys.read_strobe << LDMT3R_RCLW_SHIFT);
- lcdc_write(sdev, LDMT3R, value);
- }
-
- value = ((mode->hdisplay / 8) << 16) /* HDCN */
- | (mode->htotal / 8); /* HTCN */
- lcdc_write(sdev, LDHCNR, value);
-
- value = (((mode->hsync_end - mode->hsync_start) / 8) << 16) /* HSYNW */
- | (mode->hsync_start / 8); /* HSYNP */
- lcdc_write(sdev, LDHSYNR, value);
-
- value = ((mode->hdisplay & 7) << 24) | ((mode->htotal & 7) << 16)
- | (((mode->hsync_end - mode->hsync_start) & 7) << 8)
- | (mode->hsync_start & 7);
- lcdc_write(sdev, LDHAJR, value);
-
- value = ((mode->vdisplay) << 16) /* VDLN */
- | mode->vtotal; /* VTLN */
- lcdc_write(sdev, LDVLNR, value);
-
- value = ((mode->vsync_end - mode->vsync_start) << 16) /* VSYNW */
- | mode->vsync_start; /* VSYNP */
- lcdc_write(sdev, LDVSYNR, value);
-}
-
-static void shmob_drm_crtc_start_stop(struct shmob_drm_crtc *scrtc, bool start)
-{
- struct shmob_drm_device *sdev = scrtc->crtc.dev->dev_private;
- u32 value;
-
- value = lcdc_read(sdev, LDCNT2R);
- if (start)
- lcdc_write(sdev, LDCNT2R, value | LDCNT2R_DO);
- else
- lcdc_write(sdev, LDCNT2R, value & ~LDCNT2R_DO);
-
- /* Wait until power is applied/stopped. */
- while (1) {
- value = lcdc_read(sdev, LDPMR) & LDPMR_LPS;
- if ((start && value) || (!start && !value))
- break;
-
- cpu_relax();
- }
-
- if (!start) {
- /* Stop the dot clock. */
- lcdc_write(sdev, LDDCKSTPR, LDDCKSTPR_DCKSTP);
- }
-}
-
-/*
- * shmob_drm_crtc_start - Configure and start the LCDC
- * @scrtc: the SH Mobile CRTC
- *
- * Configure and start the LCDC device. External devices (clocks, MERAM, panels,
- * ...) are not touched by this function.
- */
-static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct shmob_drm_format_info *format;
- struct drm_device *dev = sdev->ddev;
- struct drm_plane *plane;
- u32 value;
- int ret;
-
- if (scrtc->started)
- return;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (WARN_ON(format == NULL))
- return;
-
- /* Enable clocks before accessing the hardware. */
- ret = shmob_drm_clk_on(sdev);
- if (ret < 0)
- return;
-
- /* Reset and enable the LCDC. */
- lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR);
- lcdc_wait_bit(sdev, LDCNT2R, LDCNT2R_BR, 0);
- lcdc_write(sdev, LDCNT2R, LDCNT2R_ME);
-
- /* Stop the LCDC first and disable all interrupts. */
- shmob_drm_crtc_start_stop(scrtc, false);
- lcdc_write(sdev, LDINTR, 0);
-
- /* Configure power supply, dot clocks and start them. */
- lcdc_write(sdev, LDPMR, 0);
-
- value = sdev->lddckr;
- if (idata->clk_div) {
- /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider
- * denominator.
- */
- lcdc_write(sdev, LDDCKPAT1R, 0);
- lcdc_write(sdev, LDDCKPAT2R, (1 << (idata->clk_div / 2)) - 1);
-
- if (idata->clk_div == 1)
- value |= LDDCKR_MOSEL;
- else
- value |= idata->clk_div;
- }
-
- lcdc_write(sdev, LDDCKR, value);
- lcdc_write(sdev, LDDCKSTPR, 0);
- lcdc_wait_bit(sdev, LDDCKSTPR, ~0, 0);
-
- /* TODO: Setup SYS panel */
-
- /* Setup geometry, format, frame buffer memory and operation mode. */
- shmob_drm_crtc_setup_geometry(scrtc);
-
- /* TODO: Handle YUV colorspaces. Hardcode REC709 for now. */
- lcdc_write(sdev, LDDFR, format->lddfr | LDDFR_CF1);
- lcdc_write(sdev, LDMLSR, scrtc->line_size);
- lcdc_write(sdev, LDSA1R, scrtc->dma[0]);
- if (format->yuv)
- lcdc_write(sdev, LDSA2R, scrtc->dma[1]);
- lcdc_write(sdev, LDSM1R, 0);
-
- /* Word and long word swap. */
- switch (format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- value = LDDDSR_LS | LDDDSR_WS;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- value = LDDDSR_LS | LDDDSR_WS | LDDDSR_BS;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- value = LDDDSR_LS;
- break;
- }
- lcdc_write(sdev, LDDDSR, value);
-
- /* Setup planes. */
- drm_for_each_legacy_plane(plane, dev) {
- if (plane->crtc == crtc)
- shmob_drm_plane_setup(plane);
- }
-
- /* Enable the display output. */
- lcdc_write(sdev, LDCNT1R, LDCNT1R_DE);
-
- shmob_drm_crtc_start_stop(scrtc, true);
-
- scrtc->started = true;
-}
-
-static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- if (!scrtc->started)
- return;
-
- /* Stop the LCDC. */
- shmob_drm_crtc_start_stop(scrtc, false);
-
- /* Disable the display output. */
- lcdc_write(sdev, LDCNT1R, 0);
-
- /* Stop clocks. */
- shmob_drm_clk_off(sdev);
-
- scrtc->started = false;
-}
-
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc)
-{
- shmob_drm_crtc_stop(scrtc);
-}
-
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc)
-{
- if (scrtc->dpms != DRM_MODE_DPMS_ON)
- return;
-
- shmob_drm_crtc_start(scrtc);
-}
-
-static void shmob_drm_crtc_compute_base(struct shmob_drm_crtc *scrtc,
- int x, int y)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct drm_framebuffer *fb = crtc->primary->fb;
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = scrtc->format->yuv ? 8 : scrtc->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- scrtc->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (scrtc->format->yuv) {
- bpp = scrtc->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- scrtc->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void shmob_drm_crtc_update_base(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_compute_base(scrtc, crtc->x, crtc->y);
-
- lcdc_write_mirror(sdev, LDSA1R, scrtc->dma[0]);
- if (scrtc->format->yuv)
- lcdc_write_mirror(sdev, LDSA2R, scrtc->dma[1]);
-
- lcdc_write(sdev, LDRCNTR, lcdc_read(sdev, LDRCNTR) ^ LDRCNTR_MRS);
-}
-
-#define to_shmob_crtc(c) container_of(c, struct shmob_drm_crtc, crtc)
-
-static void shmob_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
-
- if (scrtc->dpms == mode)
- return;
-
- if (mode == DRM_MODE_DPMS_ON)
- shmob_drm_crtc_start(scrtc);
- else
- shmob_drm_crtc_stop(scrtc);
-
- scrtc->dpms = mode;
-}
-
-static void shmob_drm_crtc_mode_prepare(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static int shmob_drm_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "mode_set: unsupported format %08x\n",
- crtc->primary->fb->format->format);
- return -EINVAL;
- }
-
- scrtc->format = format;
- scrtc->line_size = crtc->primary->fb->pitches[0];
-
- shmob_drm_crtc_compute_base(scrtc, x, y);
-
- return 0;
-}
-
-static void shmob_drm_crtc_mode_commit(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-static int shmob_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
-{
- shmob_drm_crtc_update_base(to_shmob_crtc(crtc));
-
- return 0;
-}
-
-static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
- .dpms = shmob_drm_crtc_dpms,
- .prepare = shmob_drm_crtc_mode_prepare,
- .commit = shmob_drm_crtc_mode_commit,
- .mode_set = shmob_drm_crtc_mode_set,
- .mode_set_base = shmob_drm_crtc_mode_set_base,
-};
-
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc)
-{
- struct drm_pending_vblank_event *event;
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- event = scrtc->event;
- scrtc->event = NULL;
- if (event) {
- drm_crtc_send_vblank_event(&scrtc->crtc, event);
- drm_crtc_vblank_put(&scrtc->crtc);
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-}
-
-static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_pending_vblank_event *event,
- uint32_t page_flip_flags,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- if (scrtc->event != NULL) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- return -EBUSY;
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-
- crtc->primary->fb = fb;
- shmob_drm_crtc_update_base(scrtc);
-
- if (event) {
- event->pipe = 0;
- drm_crtc_vblank_get(&scrtc->crtc);
- spin_lock_irqsave(&dev->event_lock, flags);
- scrtc->event = event;
- spin_unlock_irqrestore(&dev->event_lock, flags);
- }
-
- return 0;
-}
-
-static void shmob_drm_crtc_enable_vblank(struct shmob_drm_device *sdev,
- bool enable)
-{
- unsigned long flags;
- u32 ldintr;
-
- /* Be careful not to acknowledge any pending interrupt. */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- ldintr = lcdc_read(sdev, LDINTR) | LDINTR_STATUS_MASK;
- if (enable)
- ldintr |= LDINTR_VEE;
- else
- ldintr &= ~LDINTR_VEE;
- lcdc_write(sdev, LDINTR, ldintr);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-}
-
-static int shmob_drm_enable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, true);
-
- return 0;
-}
-
-static void shmob_drm_disable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, false);
-}
-
-static const struct drm_crtc_funcs crtc_funcs = {
- .destroy = drm_crtc_cleanup,
- .set_config = drm_crtc_helper_set_config,
- .page_flip = shmob_drm_crtc_page_flip,
- .enable_vblank = shmob_drm_enable_vblank,
- .disable_vblank = shmob_drm_disable_vblank,
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev)
-{
- struct drm_crtc *crtc = &sdev->crtc.crtc;
- int ret;
-
- sdev->crtc.dpms = DRM_MODE_DPMS_OFF;
-
- ret = drm_crtc_init(sdev->ddev, crtc, &crtc_funcs);
- if (ret < 0)
- return ret;
-
- drm_crtc_helper_add(crtc, &crtc_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Encoder
- */
-
-#define to_shmob_encoder(e) \
- container_of(e, struct shmob_drm_encoder, encoder)
-
-static void shmob_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct shmob_drm_encoder *senc = to_shmob_encoder(encoder);
- struct shmob_drm_device *sdev = encoder->dev->dev_private;
- struct shmob_drm_connector *scon = &sdev->connector;
-
- if (senc->dpms == mode)
- return;
-
- shmob_drm_backlight_dpms(scon, mode);
-
- senc->dpms = mode;
-}
-
-static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct shmob_drm_device *sdev = dev->dev_private;
- struct drm_connector *connector = &sdev->connector.connector;
- const struct drm_display_mode *panel_mode;
-
- if (list_empty(&connector->modes)) {
- dev_dbg(dev->dev, "mode_fixup: empty modes list\n");
- return false;
- }
-
- /* The flat panel mode is fixed, just copy it to the adjusted mode. */
- panel_mode = list_first_entry(&connector->modes,
- struct drm_display_mode, head);
- drm_mode_copy(adjusted_mode, panel_mode);
-
- return true;
-}
-
-static void shmob_drm_encoder_mode_prepare(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_commit(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
- .dpms = shmob_drm_encoder_dpms,
- .mode_fixup = shmob_drm_encoder_mode_fixup,
- .prepare = shmob_drm_encoder_mode_prepare,
- .commit = shmob_drm_encoder_mode_commit,
- .mode_set = shmob_drm_encoder_mode_set,
-};
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev)
-{
- struct drm_encoder *encoder = &sdev->encoder.encoder;
- int ret;
-
- sdev->encoder.dpms = DRM_MODE_DPMS_OFF;
-
- encoder->possible_crtcs = 1;
-
- ret = drm_simple_encoder_init(sdev->ddev, encoder,
- DRM_MODE_ENCODER_LVDS);
- if (ret < 0)
- return ret;
-
- drm_encoder_helper_add(encoder, &encoder_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Connector
- */
-
-#define to_shmob_connector(c) \
- container_of(c, struct shmob_drm_connector, connector)
-
-static int shmob_drm_connector_get_modes(struct drm_connector *connector)
-{
- struct shmob_drm_device *sdev = connector->dev->dev_private;
- struct drm_display_mode *mode;
-
- mode = drm_mode_create(connector->dev);
- if (mode == NULL)
- return 0;
-
- mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
- mode->clock = sdev->pdata->panel.mode.clock;
- mode->hdisplay = sdev->pdata->panel.mode.hdisplay;
- mode->hsync_start = sdev->pdata->panel.mode.hsync_start;
- mode->hsync_end = sdev->pdata->panel.mode.hsync_end;
- mode->htotal = sdev->pdata->panel.mode.htotal;
- mode->vdisplay = sdev->pdata->panel.mode.vdisplay;
- mode->vsync_start = sdev->pdata->panel.mode.vsync_start;
- mode->vsync_end = sdev->pdata->panel.mode.vsync_end;
- mode->vtotal = sdev->pdata->panel.mode.vtotal;
- mode->flags = sdev->pdata->panel.mode.flags;
-
- drm_mode_set_name(mode);
- drm_mode_probed_add(connector, mode);
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- return 1;
-}
-
-static struct drm_encoder *
-shmob_drm_connector_best_encoder(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- return scon->encoder;
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
- .get_modes = shmob_drm_connector_get_modes,
- .best_encoder = shmob_drm_connector_best_encoder,
-};
-
-static void shmob_drm_connector_destroy(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- shmob_drm_backlight_exit(scon);
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = shmob_drm_connector_destroy,
-};
-
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder)
-{
- struct drm_connector *connector = &sdev->connector.connector;
- int ret;
-
- sdev->connector.encoder = encoder;
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- ret = drm_connector_init(sdev->ddev, connector, &connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
- if (ret < 0)
- return ret;
-
- drm_connector_helper_add(connector, &connector_helper_funcs);
-
- ret = shmob_drm_backlight_init(&sdev->connector);
- if (ret < 0)
- goto err_cleanup;
-
- ret = drm_connector_attach_encoder(connector, encoder);
- if (ret < 0)
- goto err_backlight;
-
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
- drm_object_property_set_value(&connector->base,
- sdev->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
-
- return 0;
-
-err_backlight:
- shmob_drm_backlight_exit(&sdev->connector);
-err_cleanup:
- drm_connector_cleanup(connector);
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h b/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
deleted file mode 100644
index 21718843f46d3d..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_crtc.h -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_CRTC_H__
-#define __SHMOB_DRM_CRTC_H__
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_connector.h>
-#include <drm/drm_encoder.h>
-
-struct backlight_device;
-struct drm_pending_vblank_event;
-struct shmob_drm_device;
-struct shmob_drm_format_info;
-
-struct shmob_drm_crtc {
- struct drm_crtc crtc;
-
- struct drm_pending_vblank_event *event;
- int dpms;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
- unsigned int line_size;
- bool started;
-};
-
-struct shmob_drm_encoder {
- struct drm_encoder encoder;
- int dpms;
-};
-
-struct shmob_drm_connector {
- struct drm_connector connector;
- struct drm_encoder *encoder;
-
- struct backlight_device *backlight;
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev);
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc);
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev);
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder);
-
-#endif /* __SHMOB_DRM_CRTC_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
deleted file mode 100644
index 3d511fa3891364..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_drv.c -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_drv.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_module.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Hardware initialization
- */
-
-static int shmob_drm_init_interface(struct shmob_drm_device *sdev)
-{
- static const u32 ldmt1r[] = {
- [SHMOB_DRM_IFACE_RGB8] = LDMT1R_MIFTYP_RGB8,
- [SHMOB_DRM_IFACE_RGB9] = LDMT1R_MIFTYP_RGB9,
- [SHMOB_DRM_IFACE_RGB12A] = LDMT1R_MIFTYP_RGB12A,
- [SHMOB_DRM_IFACE_RGB12B] = LDMT1R_MIFTYP_RGB12B,
- [SHMOB_DRM_IFACE_RGB16] = LDMT1R_MIFTYP_RGB16,
- [SHMOB_DRM_IFACE_RGB18] = LDMT1R_MIFTYP_RGB18,
- [SHMOB_DRM_IFACE_RGB24] = LDMT1R_MIFTYP_RGB24,
- [SHMOB_DRM_IFACE_YUV422] = LDMT1R_MIFTYP_YCBCR,
- [SHMOB_DRM_IFACE_SYS8A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A,
- [SHMOB_DRM_IFACE_SYS8B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B,
- [SHMOB_DRM_IFACE_SYS8C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C,
- [SHMOB_DRM_IFACE_SYS8D] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D,
- [SHMOB_DRM_IFACE_SYS9] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS9,
- [SHMOB_DRM_IFACE_SYS12] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS12,
- [SHMOB_DRM_IFACE_SYS16A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A,
- [SHMOB_DRM_IFACE_SYS16B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B,
- [SHMOB_DRM_IFACE_SYS16C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C,
- [SHMOB_DRM_IFACE_SYS18] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS18,
- [SHMOB_DRM_IFACE_SYS24] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS24,
- };
-
- if (sdev->pdata->iface.interface >= ARRAY_SIZE(ldmt1r)) {
- dev_err(sdev->dev, "invalid interface type %u\n",
- sdev->pdata->iface.interface);
- return -EINVAL;
- }
-
- sdev->ldmt1r = ldmt1r[sdev->pdata->iface.interface];
- return 0;
-}
-
-static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev,
- enum shmob_drm_clk_source clksrc)
-{
- struct clk *clk;
- char *clkname;
-
- switch (clksrc) {
- case SHMOB_DRM_CLK_BUS:
- clkname = "bus_clk";
- sdev->lddckr = LDDCKR_ICKSEL_BUS;
- break;
- case SHMOB_DRM_CLK_PERIPHERAL:
- clkname = "peripheral_clk";
- sdev->lddckr = LDDCKR_ICKSEL_MIPI;
- break;
- case SHMOB_DRM_CLK_EXTERNAL:
- clkname = NULL;
- sdev->lddckr = LDDCKR_ICKSEL_HDMI;
- break;
- default:
- return -EINVAL;
- }
-
- clk = devm_clk_get(sdev->dev, clkname);
- if (IS_ERR(clk)) {
- dev_err(sdev->dev, "cannot get dot clock %s\n", clkname);
- return PTR_ERR(clk);
- }
-
- sdev->clock = clk;
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * DRM operations
- */
-
-static irqreturn_t shmob_drm_irq(int irq, void *arg)
-{
- struct drm_device *dev = arg;
- struct shmob_drm_device *sdev = dev->dev_private;
- unsigned long flags;
- u32 status;
-
- /* Acknowledge interrupts. Putting interrupt enable and interrupt flag
- * bits in the same register is really brain-dead design and requires
- * taking a spinlock.
- */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- status = lcdc_read(sdev, LDINTR);
- lcdc_write(sdev, LDINTR, status ^ LDINTR_STATUS_MASK);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-
- if (status & LDINTR_VES) {
- drm_handle_vblank(dev, 0);
- shmob_drm_crtc_finish_page_flip(&sdev->crtc);
- }
-
- return IRQ_HANDLED;
-}
-
-DEFINE_DRM_GEM_DMA_FOPS(shmob_drm_fops);
-
-static const struct drm_driver shmob_drm_driver = {
- .driver_features = DRIVER_GEM | DRIVER_MODESET,
- DRM_GEM_DMA_DRIVER_OPS,
- .fops = &shmob_drm_fops,
- .name = "shmob-drm",
- .desc = "Renesas SH Mobile DRM",
- .date = "20120424",
- .major = 1,
- .minor = 0,
-};
-
-/* -----------------------------------------------------------------------------
- * Power management
- */
-
-#ifdef CONFIG_PM_SLEEP
-static int shmob_drm_pm_suspend(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_kms_helper_poll_disable(sdev->ddev);
- shmob_drm_crtc_suspend(&sdev->crtc);
-
- return 0;
-}
-
-static int shmob_drm_pm_resume(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_modeset_lock_all(sdev->ddev);
- shmob_drm_crtc_resume(&sdev->crtc);
- drm_modeset_unlock_all(sdev->ddev);
-
- drm_kms_helper_poll_enable(sdev->ddev);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops shmob_drm_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(shmob_drm_pm_suspend, shmob_drm_pm_resume)
-};
-
-/* -----------------------------------------------------------------------------
- * Platform driver
- */
-
-static int shmob_drm_remove(struct platform_device *pdev)
-{
- struct shmob_drm_device *sdev = platform_get_drvdata(pdev);
- struct drm_device *ddev = sdev->ddev;
-
- drm_dev_unregister(ddev);
- drm_kms_helper_poll_fini(ddev);
- free_irq(sdev->irq, ddev);
- drm_dev_put(ddev);
-
- return 0;
-}
-
-static int shmob_drm_probe(struct platform_device *pdev)
-{
- struct shmob_drm_platform_data *pdata = pdev->dev.platform_data;
- struct shmob_drm_device *sdev;
- struct drm_device *ddev;
- unsigned int i;
- int ret;
-
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
- /*
- * Allocate and initialize the driver private data, I/O resources and
- * clocks.
- */
- sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL);
- if (sdev == NULL)
- return -ENOMEM;
-
- sdev->dev = &pdev->dev;
- sdev->pdata = pdata;
- spin_lock_init(&sdev->irq_lock);
-
- platform_set_drvdata(pdev, sdev);
-
- sdev->mmio = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(sdev->mmio))
- return PTR_ERR(sdev->mmio);
-
- ret = shmob_drm_setup_clocks(sdev, pdata->clk_source);
- if (ret < 0)
- return ret;
-
- ret = shmob_drm_init_interface(sdev);
- if (ret < 0)
- return ret;
-
- /* Allocate and initialize the DRM device. */
- ddev = drm_dev_alloc(&shmob_drm_driver, &pdev->dev);
- if (IS_ERR(ddev))
- return PTR_ERR(ddev);
-
- sdev->ddev = ddev;
- ddev->dev_private = sdev;
-
- ret = shmob_drm_modeset_init(sdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize mode setting\n");
- goto err_free_drm_dev;
- }
-
- for (i = 0; i < 4; ++i) {
- ret = shmob_drm_plane_create(sdev, i);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to create plane %u\n", i);
- goto err_modeset_cleanup;
- }
- }
-
- ret = drm_vblank_init(ddev, 1);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize vblank\n");
- goto err_modeset_cleanup;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto err_modeset_cleanup;
- sdev->irq = ret;
-
- ret = request_irq(sdev->irq, shmob_drm_irq, 0, ddev->driver->name,
- ddev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to install IRQ handler\n");
- goto err_modeset_cleanup;
- }
-
- /*
- * Register the DRM device with the core and the connectors with
- * sysfs.
- */
- ret = drm_dev_register(ddev, 0);
- if (ret < 0)
- goto err_irq_uninstall;
-
- return 0;
-
-err_irq_uninstall:
- free_irq(sdev->irq, ddev);
-err_modeset_cleanup:
- drm_kms_helper_poll_fini(ddev);
-err_free_drm_dev:
- drm_dev_put(ddev);
-
- return ret;
-}
-
-static struct platform_driver shmob_drm_platform_driver = {
- .probe = shmob_drm_probe,
- .remove = shmob_drm_remove,
- .driver = {
- .name = "shmob-drm",
- .pm = &shmob_drm_pm_ops,
- },
-};
-
-drm_module_platform_driver(shmob_drm_platform_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_DESCRIPTION("Renesas SH Mobile DRM Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.h b/drivers/gpu/drm/shmobile/shmob_drm_drv.h
deleted file mode 100644
index 4964ddd5ab7472..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm.h -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_DRV_H__
-#define __SHMOB_DRM_DRV_H__
-
-#include <linux/kernel.h>
-#include <linux/platform_data/shmob_drm.h>
-#include <linux/spinlock.h>
-
-#include "shmob_drm_crtc.h"
-
-struct clk;
-struct device;
-struct drm_device;
-
-struct shmob_drm_device {
- struct device *dev;
- const struct shmob_drm_platform_data *pdata;
-
- void __iomem *mmio;
- struct clk *clock;
- u32 lddckr;
- u32 ldmt1r;
-
- unsigned int irq;
- spinlock_t irq_lock; /* Protects hardware LDINTR register */
-
- struct drm_device *ddev;
-
- struct shmob_drm_crtc crtc;
- struct shmob_drm_encoder encoder;
- struct shmob_drm_connector connector;
-};
-
-#endif /* __SHMOB_DRM_DRV_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/shmobile/shmob_drm_kms.c
deleted file mode 100644
index 60a2c8d8a0d947..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_kms.c -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_probe_helper.h>
-
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Format helpers
- */
-
-static const struct shmob_drm_format_info shmob_drm_format_infos[] = {
- {
- .fourcc = DRM_FORMAT_RGB565,
- .bpp = 16,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB16,
- }, {
- .fourcc = DRM_FORMAT_RGB888,
- .bpp = 24,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB24,
- }, {
- .fourcc = DRM_FORMAT_ARGB8888,
- .bpp = 32,
- .yuv = false,
- .lddfr = LDDFR_PKF_ARGB32,
- }, {
- .fourcc = DRM_FORMAT_NV12,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV21,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV16,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV61,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV24,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- }, {
- .fourcc = DRM_FORMAT_NV42,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- },
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(shmob_drm_format_infos); ++i) {
- if (shmob_drm_format_infos[i].fourcc == fourcc)
- return &shmob_drm_format_infos[i];
- }
-
- return NULL;
-}
-
-/* -----------------------------------------------------------------------------
- * Frame buffer
- */
-
-static struct drm_framebuffer *
-shmob_drm_fb_create(struct drm_device *dev, struct drm_file *file_priv,
- const struct drm_mode_fb_cmd2 *mode_cmd)
-{
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(mode_cmd->pixel_format);
- if (format == NULL) {
- dev_dbg(dev->dev, "unsupported pixel format %08x\n",
- mode_cmd->pixel_format);
- return ERR_PTR(-EINVAL);
- }
-
- if (mode_cmd->pitches[0] & 7 || mode_cmd->pitches[0] >= 65536) {
- dev_dbg(dev->dev, "invalid pitch value %u\n",
- mode_cmd->pitches[0]);
- return ERR_PTR(-EINVAL);
- }
-
- if (format->yuv) {
- unsigned int chroma_cpp = format->bpp == 24 ? 2 : 1;
-
- if (mode_cmd->pitches[1] != mode_cmd->pitches[0] * chroma_cpp) {
- dev_dbg(dev->dev,
- "luma and chroma pitches do not match\n");
- return ERR_PTR(-EINVAL);
- }
- }
-
- return drm_gem_fb_create(dev, file_priv, mode_cmd);
-}
-
-static const struct drm_mode_config_funcs shmob_drm_mode_config_funcs = {
- .fb_create = shmob_drm_fb_create,
-};
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev)
-{
- int ret;
-
- ret = drmm_mode_config_init(sdev->ddev);
- if (ret)
- return ret;
-
- shmob_drm_crtc_create(sdev);
- shmob_drm_encoder_create(sdev);
- shmob_drm_connector_create(sdev, &sdev->encoder.encoder);
-
- drm_kms_helper_poll_init(sdev->ddev);
-
- sdev->ddev->mode_config.min_width = 0;
- sdev->ddev->mode_config.min_height = 0;
- sdev->ddev->mode_config.max_width = 4095;
- sdev->ddev->mode_config.max_height = 4095;
- sdev->ddev->mode_config.funcs = &shmob_drm_mode_config_funcs;
-
- drm_helper_disable_unused_functions(sdev->ddev);
-
- return 0;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.h b/drivers/gpu/drm/shmobile/shmob_drm_kms.h
deleted file mode 100644
index 0347b1fd2338a8..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_kms.h -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_KMS_H__
-#define __SHMOB_DRM_KMS_H__
-
-#include <linux/types.h>
-
-struct drm_gem_dma_object;
-struct shmob_drm_device;
-
-struct shmob_drm_format_info {
- u32 fourcc;
- unsigned int bpp;
- bool yuv;
- u32 lddfr;
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc);
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev);
-
-#endif /* __SHMOB_DRM_KMS_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.c b/drivers/gpu/drm/shmobile/shmob_drm_plane.c
deleted file mode 100644
index 6c5f0cbe7d95b9..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_plane.c -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-struct shmob_drm_plane {
- struct drm_plane plane;
- unsigned int index;
- unsigned int alpha;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
-
- unsigned int src_x;
- unsigned int src_y;
- unsigned int crtc_x;
- unsigned int crtc_y;
- unsigned int crtc_w;
- unsigned int crtc_h;
-};
-
-#define to_shmob_plane(p) container_of(p, struct shmob_drm_plane, plane)
-
-static void shmob_drm_plane_compute_base(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb,
- int x, int y)
-{
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = splane->format->yuv ? 8 : splane->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- splane->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (splane->format->yuv) {
- bpp = splane->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- splane->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void __shmob_drm_plane_setup(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb)
-{
- struct shmob_drm_device *sdev = splane->plane.dev->dev_private;
- u32 format;
-
- /* TODO: Support ROP3 mode */
- format = LDBBSIFR_EN | (splane->alpha << LDBBSIFR_LAY_SHIFT);
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW | LDBBSIFR_SWPB;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- format |= LDBBSIFR_SWPL;
- break;
- }
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB16;
- break;
- case DRM_FORMAT_RGB888:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB24;
- break;
- case DRM_FORMAT_ARGB8888:
- format |= LDBBSIFR_AL_PK | LDBBSIFR_RY | LDDFR_PKF_ARGB32;
- break;
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV21:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_420;
- break;
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV61:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_422;
- break;
- case DRM_FORMAT_NV24:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_444;
- break;
- }
-
-#define plane_reg_dump(sdev, splane, reg) \
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x 0x%08x\n", __func__, \
- splane->index, #reg, \
- lcdc_read(sdev, reg(splane->index)), \
- lcdc_read(sdev, reg(splane->index) + LCDC_SIDE_B_OFFSET))
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-
- lcdc_write(sdev, LDBCR, LDBCR_UPC(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), format);
-
- lcdc_write(sdev, LDBnBSSZR(splane->index),
- (splane->crtc_h << LDBBSSZR_BVSS_SHIFT) |
- (splane->crtc_w << LDBBSSZR_BHSS_SHIFT));
- lcdc_write(sdev, LDBnBLOCR(splane->index),
- (splane->crtc_y << LDBBLOCR_CVLC_SHIFT) |
- (splane->crtc_x << LDBBLOCR_CHLC_SHIFT));
- lcdc_write(sdev, LDBnBSMWR(splane->index),
- fb->pitches[0] << LDBBSMWR_BSMW_SHIFT);
-
- shmob_drm_plane_compute_base(splane, fb, splane->src_x, splane->src_y);
-
- lcdc_write(sdev, LDBnBSAYR(splane->index), splane->dma[0]);
- if (splane->format->yuv)
- lcdc_write(sdev, LDBnBSACR(splane->index), splane->dma[1]);
-
- lcdc_write(sdev, LDBCR,
- LDBCR_UPF(splane->index) | LDBCR_UPD(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-}
-
-void shmob_drm_plane_setup(struct drm_plane *plane)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
-
- if (plane->fb == NULL)
- return;
-
- __shmob_drm_plane_setup(splane, plane->fb);
-}
-
-static int
-shmob_drm_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "update_plane: unsupported format %08x\n",
- fb->format->format);
- return -EINVAL;
- }
-
- if (src_w >> 16 != crtc_w || src_h >> 16 != crtc_h) {
- dev_dbg(sdev->dev, "%s: scaling not supported\n", __func__);
- return -EINVAL;
- }
-
- splane->format = format;
-
- splane->src_x = src_x >> 16;
- splane->src_y = src_y >> 16;
- splane->crtc_x = crtc_x;
- splane->crtc_y = crtc_y;
- splane->crtc_w = crtc_w;
- splane->crtc_h = crtc_h;
-
- __shmob_drm_plane_setup(splane, fb);
- return 0;
-}
-
-static int shmob_drm_plane_disable(struct drm_plane *plane,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
-
- splane->format = NULL;
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), 0);
- return 0;
-}
-
-static void shmob_drm_plane_destroy(struct drm_plane *plane)
-{
- drm_plane_force_disable(plane);
- drm_plane_cleanup(plane);
-}
-
-static const struct drm_plane_funcs shmob_drm_plane_funcs = {
- .update_plane = shmob_drm_plane_update,
- .disable_plane = shmob_drm_plane_disable,
- .destroy = shmob_drm_plane_destroy,
-};
-
-static const uint32_t formats[] = {
- DRM_FORMAT_RGB565,
- DRM_FORMAT_RGB888,
- DRM_FORMAT_ARGB8888,
- DRM_FORMAT_NV12,
- DRM_FORMAT_NV21,
- DRM_FORMAT_NV16,
- DRM_FORMAT_NV61,
- DRM_FORMAT_NV24,
- DRM_FORMAT_NV42,
-};
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index)
-{
- struct shmob_drm_plane *splane;
- int ret;
-
- splane = devm_kzalloc(sdev->dev, sizeof(*splane), GFP_KERNEL);
- if (splane == NULL)
- return -ENOMEM;
-
- splane->index = index;
- splane->alpha = 255;
-
- ret = drm_universal_plane_init(sdev->ddev, &splane->plane, 1,
- &shmob_drm_plane_funcs,
- formats, ARRAY_SIZE(formats), NULL,
- DRM_PLANE_TYPE_OVERLAY, NULL);
-
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.h b/drivers/gpu/drm/shmobile/shmob_drm_plane.h
deleted file mode 100644
index e72b21a4288fc2..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_plane.h -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_PLANE_H__
-#define __SHMOB_DRM_PLANE_H__
-
-struct drm_plane;
-struct shmob_drm_device;
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index);
-void shmob_drm_plane_setup(struct drm_plane *plane);
-
-#endif /* __SHMOB_DRM_PLANE_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_regs.h b/drivers/gpu/drm/shmobile/shmob_drm_regs.h
deleted file mode 100644
index 058533685c4cd0..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_regs.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_regs.h -- SH Mobile DRM registers
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_REGS_H__
-#define __SHMOB_DRM_REGS_H__
-
-#include <linux/io.h>
-#include <linux/jiffies.h>
-
-#include "shmob_drm_drv.h"
-
-/* Register definitions */
-#define LDDCKPAT1R 0x400
-#define LDDCKPAT2R 0x404
-#define LDDCKR 0x410
-#define LDDCKR_ICKSEL_BUS (0 << 16)
-#define LDDCKR_ICKSEL_MIPI (1 << 16)
-#define LDDCKR_ICKSEL_HDMI (2 << 16)
-#define LDDCKR_ICKSEL_EXT (3 << 16)
-#define LDDCKR_ICKSEL_MASK (7 << 16)
-#define LDDCKR_MOSEL (1 << 6)
-#define LDDCKSTPR 0x414
-#define LDDCKSTPR_DCKSTS (1 << 16)
-#define LDDCKSTPR_DCKSTP (1 << 0)
-#define LDMT1R 0x418
-#define LDMT1R_VPOL (1 << 28)
-#define LDMT1R_HPOL (1 << 27)
-#define LDMT1R_DWPOL (1 << 26)
-#define LDMT1R_DIPOL (1 << 25)
-#define LDMT1R_DAPOL (1 << 24)
-#define LDMT1R_HSCNT (1 << 17)
-#define LDMT1R_DWCNT (1 << 16)
-#define LDMT1R_IFM (1 << 12)
-#define LDMT1R_MIFTYP_RGB8 (0x0 << 0)
-#define LDMT1R_MIFTYP_RGB9 (0x4 << 0)
-#define LDMT1R_MIFTYP_RGB12A (0x5 << 0)
-#define LDMT1R_MIFTYP_RGB12B (0x6 << 0)
-#define LDMT1R_MIFTYP_RGB16 (0x7 << 0)
-#define LDMT1R_MIFTYP_RGB18 (0xa << 0)
-#define LDMT1R_MIFTYP_RGB24 (0xb << 0)
-#define LDMT1R_MIFTYP_YCBCR (0xf << 0)
-#define LDMT1R_MIFTYP_SYS8A (0x0 << 0)
-#define LDMT1R_MIFTYP_SYS8B (0x1 << 0)
-#define LDMT1R_MIFTYP_SYS8C (0x2 << 0)
-#define LDMT1R_MIFTYP_SYS8D (0x3 << 0)
-#define LDMT1R_MIFTYP_SYS9 (0x4 << 0)
-#define LDMT1R_MIFTYP_SYS12 (0x5 << 0)
-#define LDMT1R_MIFTYP_SYS16A (0x7 << 0)
-#define LDMT1R_MIFTYP_SYS16B (0x8 << 0)
-#define LDMT1R_MIFTYP_SYS16C (0x9 << 0)
-#define LDMT1R_MIFTYP_SYS18 (0xa << 0)
-#define LDMT1R_MIFTYP_SYS24 (0xb << 0)
-#define LDMT1R_MIFTYP_MASK (0xf << 0)
-#define LDMT2R 0x41c
-#define LDMT2R_CSUP_MASK (7 << 26)
-#define LDMT2R_CSUP_SHIFT 26
-#define LDMT2R_RSV (1 << 25)
-#define LDMT2R_VSEL (1 << 24)
-#define LDMT2R_WCSC_MASK (0xff << 16)
-#define LDMT2R_WCSC_SHIFT 16
-#define LDMT2R_WCEC_MASK (0xff << 8)
-#define LDMT2R_WCEC_SHIFT 8
-#define LDMT2R_WCLW_MASK (0xff << 0)
-#define LDMT2R_WCLW_SHIFT 0
-#define LDMT3R 0x420
-#define LDMT3R_RDLC_MASK (0x3f << 24)
-#define LDMT3R_RDLC_SHIFT 24
-#define LDMT3R_RCSC_MASK (0xff << 16)
-#define LDMT3R_RCSC_SHIFT 16
-#define LDMT3R_RCEC_MASK (0xff << 8)
-#define LDMT3R_RCEC_SHIFT 8
-#define LDMT3R_RCLW_MASK (0xff << 0)
-#define LDMT3R_RCLW_SHIFT 0
-#define LDDFR 0x424
-#define LDDFR_CF1 (1 << 18)
-#define LDDFR_CF0 (1 << 17)
-#define LDDFR_CC (1 << 16)
-#define LDDFR_YF_420 (0 << 8)
-#define LDDFR_YF_422 (1 << 8)
-#define LDDFR_YF_444 (2 << 8)
-#define LDDFR_YF_MASK (3 << 8)
-#define LDDFR_PKF_ARGB32 (0x00 << 0)
-#define LDDFR_PKF_RGB16 (0x03 << 0)
-#define LDDFR_PKF_RGB24 (0x0b << 0)
-#define LDDFR_PKF_MASK (0x1f << 0)
-#define LDSM1R 0x428
-#define LDSM1R_OS (1 << 0)
-#define LDSM2R 0x42c
-#define LDSM2R_OSTRG (1 << 0)
-#define LDSA1R 0x430
-#define LDSA2R 0x434
-#define LDMLSR 0x438
-#define LDWBFR 0x43c
-#define LDWBCNTR 0x440
-#define LDWBAR 0x444
-#define LDHCNR 0x448
-#define LDHSYNR 0x44c
-#define LDVLNR 0x450
-#define LDVSYNR 0x454
-#define LDHPDR 0x458
-#define LDVPDR 0x45c
-#define LDPMR 0x460
-#define LDPMR_LPS (3 << 0)
-#define LDINTR 0x468
-#define LDINTR_FE (1 << 10)
-#define LDINTR_VSE (1 << 9)
-#define LDINTR_VEE (1 << 8)
-#define LDINTR_FS (1 << 2)
-#define LDINTR_VSS (1 << 1)
-#define LDINTR_VES (1 << 0)
-#define LDINTR_STATUS_MASK (0xff << 0)
-#define LDSR 0x46c
-#define LDSR_MSS (1 << 10)
-#define LDSR_MRS (1 << 8)
-#define LDSR_AS (1 << 1)
-#define LDCNT1R 0x470
-#define LDCNT1R_DE (1 << 0)
-#define LDCNT2R 0x474
-#define LDCNT2R_BR (1 << 8)
-#define LDCNT2R_MD (1 << 3)
-#define LDCNT2R_SE (1 << 2)
-#define LDCNT2R_ME (1 << 1)
-#define LDCNT2R_DO (1 << 0)
-#define LDRCNTR 0x478
-#define LDRCNTR_SRS (1 << 17)
-#define LDRCNTR_SRC (1 << 16)
-#define LDRCNTR_MRS (1 << 1)
-#define LDRCNTR_MRC (1 << 0)
-#define LDDDSR 0x47c
-#define LDDDSR_LS (1 << 2)
-#define LDDDSR_WS (1 << 1)
-#define LDDDSR_BS (1 << 0)
-#define LDHAJR 0x4a0
-
-#define LDDWD0R 0x800
-#define LDDWDxR_WDACT (1 << 28)
-#define LDDWDxR_RSW (1 << 24)
-#define LDDRDR 0x840
-#define LDDRDR_RSR (1 << 24)
-#define LDDRDR_DRD_MASK (0x3ffff << 0)
-#define LDDWAR 0x900
-#define LDDWAR_WA (1 << 0)
-#define LDDRAR 0x904
-#define LDDRAR_RA (1 << 0)
-
-#define LDBCR 0xb00
-#define LDBCR_UPC(n) (1 << ((n) + 16))
-#define LDBCR_UPF(n) (1 << ((n) + 8))
-#define LDBCR_UPD(n) (1 << ((n) + 0))
-#define LDBnBSIFR(n) (0xb20 + (n) * 0x20 + 0x00)
-#define LDBBSIFR_EN (1 << 31)
-#define LDBBSIFR_VS (1 << 29)
-#define LDBBSIFR_BRSEL (1 << 28)
-#define LDBBSIFR_MX (1 << 27)
-#define LDBBSIFR_MY (1 << 26)
-#define LDBBSIFR_CV3 (3 << 24)
-#define LDBBSIFR_CV2 (2 << 24)
-#define LDBBSIFR_CV1 (1 << 24)
-#define LDBBSIFR_CV0 (0 << 24)
-#define LDBBSIFR_CV_MASK (3 << 24)
-#define LDBBSIFR_LAY_MASK (0xff << 16)
-#define LDBBSIFR_LAY_SHIFT 16
-#define LDBBSIFR_ROP3_MASK (0xff << 16)
-#define LDBBSIFR_ROP3_SHIFT 16
-#define LDBBSIFR_AL_PL8 (3 << 14)
-#define LDBBSIFR_AL_PL1 (2 << 14)
-#define LDBBSIFR_AL_PK (1 << 14)
-#define LDBBSIFR_AL_1 (0 << 14)
-#define LDBBSIFR_AL_MASK (3 << 14)
-#define LDBBSIFR_SWPL (1 << 10)
-#define LDBBSIFR_SWPW (1 << 9)
-#define LDBBSIFR_SWPB (1 << 8)
-#define LDBBSIFR_RY (1 << 7)
-#define LDBBSIFR_CHRR_420 (2 << 0)
-#define LDBBSIFR_CHRR_422 (1 << 0)
-#define LDBBSIFR_CHRR_444 (0 << 0)
-#define LDBBSIFR_RPKF_ARGB32 (0x00 << 0)
-#define LDBBSIFR_RPKF_RGB16 (0x03 << 0)
-#define LDBBSIFR_RPKF_RGB24 (0x0b << 0)
-#define LDBBSIFR_RPKF_MASK (0x1f << 0)
-#define LDBnBSSZR(n) (0xb20 + (n) * 0x20 + 0x04)
-#define LDBBSSZR_BVSS_MASK (0xfff << 16)
-#define LDBBSSZR_BVSS_SHIFT 16
-#define LDBBSSZR_BHSS_MASK (0xfff << 0)
-#define LDBBSSZR_BHSS_SHIFT 0
-#define LDBnBLOCR(n) (0xb20 + (n) * 0x20 + 0x08)
-#define LDBBLOCR_CVLC_MASK (0xfff << 16)
-#define LDBBLOCR_CVLC_SHIFT 16
-#define LDBBLOCR_CHLC_MASK (0xfff << 0)
-#define LDBBLOCR_CHLC_SHIFT 0
-#define LDBnBSMWR(n) (0xb20 + (n) * 0x20 + 0x0c)
-#define LDBBSMWR_BSMWA_MASK (0xffff << 16)
-#define LDBBSMWR_BSMWA_SHIFT 16
-#define LDBBSMWR_BSMW_MASK (0xffff << 0)
-#define LDBBSMWR_BSMW_SHIFT 0
-#define LDBnBSAYR(n) (0xb20 + (n) * 0x20 + 0x10)
-#define LDBBSAYR_FG1A_MASK (0xff << 24)
-#define LDBBSAYR_FG1A_SHIFT 24
-#define LDBBSAYR_FG1R_MASK (0xff << 16)
-#define LDBBSAYR_FG1R_SHIFT 16
-#define LDBBSAYR_FG1G_MASK (0xff << 8)
-#define LDBBSAYR_FG1G_SHIFT 8
-#define LDBBSAYR_FG1B_MASK (0xff << 0)
-#define LDBBSAYR_FG1B_SHIFT 0
-#define LDBnBSACR(n) (0xb20 + (n) * 0x20 + 0x14)
-#define LDBBSACR_FG2A_MASK (0xff << 24)
-#define LDBBSACR_FG2A_SHIFT 24
-#define LDBBSACR_FG2R_MASK (0xff << 16)
-#define LDBBSACR_FG2R_SHIFT 16
-#define LDBBSACR_FG2G_MASK (0xff << 8)
-#define LDBBSACR_FG2G_SHIFT 8
-#define LDBBSACR_FG2B_MASK (0xff << 0)
-#define LDBBSACR_FG2B_SHIFT 0
-#define LDBnBSAAR(n) (0xb20 + (n) * 0x20 + 0x18)
-#define LDBBSAAR_AP_MASK (0xff << 24)
-#define LDBBSAAR_AP_SHIFT 24
-#define LDBBSAAR_R_MASK (0xff << 16)
-#define LDBBSAAR_R_SHIFT 16
-#define LDBBSAAR_GY_MASK (0xff << 8)
-#define LDBBSAAR_GY_SHIFT 8
-#define LDBBSAAR_B_MASK (0xff << 0)
-#define LDBBSAAR_B_SHIFT 0
-#define LDBnBPPCR(n) (0xb20 + (n) * 0x20 + 0x1c)
-#define LDBBPPCR_AP_MASK (0xff << 24)
-#define LDBBPPCR_AP_SHIFT 24
-#define LDBBPPCR_R_MASK (0xff << 16)
-#define LDBBPPCR_R_SHIFT 16
-#define LDBBPPCR_GY_MASK (0xff << 8)
-#define LDBBPPCR_GY_SHIFT 8
-#define LDBBPPCR_B_MASK (0xff << 0)
-#define LDBBPPCR_B_SHIFT 0
-#define LDBnBBGCL(n) (0xb10 + (n) * 0x04)
-#define LDBBBGCL_BGA_MASK (0xff << 24)
-#define LDBBBGCL_BGA_SHIFT 24
-#define LDBBBGCL_BGR_MASK (0xff << 16)
-#define LDBBBGCL_BGR_SHIFT 16
-#define LDBBBGCL_BGG_MASK (0xff << 8)
-#define LDBBBGCL_BGG_SHIFT 8
-#define LDBBBGCL_BGB_MASK (0xff << 0)
-#define LDBBBGCL_BGB_SHIFT 0
-
-#define LCDC_SIDE_B_OFFSET 0x1000
-#define LCDC_MIRROR_OFFSET 0x2000
-
-static inline bool lcdc_is_banked(u32 reg)
-{
- switch (reg) {
- case LDMT1R:
- case LDMT2R:
- case LDMT3R:
- case LDDFR:
- case LDSM1R:
- case LDSA1R:
- case LDSA2R:
- case LDMLSR:
- case LDWBFR:
- case LDWBCNTR:
- case LDWBAR:
- case LDHCNR:
- case LDHSYNR:
- case LDVLNR:
- case LDVSYNR:
- case LDHPDR:
- case LDVPDR:
- case LDHAJR:
- return true;
- default:
- return reg >= LDBnBBGCL(0) && reg <= LDBnBPPCR(3);
- }
-}
-
-static inline void lcdc_write_mirror(struct shmob_drm_device *sdev, u32 reg,
- u32 data)
-{
- iowrite32(data, sdev->mmio + reg + LCDC_MIRROR_OFFSET);
-}
-
-static inline void lcdc_write(struct shmob_drm_device *sdev, u32 reg, u32 data)
-{
- iowrite32(data, sdev->mmio + reg);
- if (lcdc_is_banked(reg))
- iowrite32(data, sdev->mmio + reg + LCDC_SIDE_B_OFFSET);
-}
-
-static inline u32 lcdc_read(struct shmob_drm_device *sdev, u32 reg)
-{
- return ioread32(sdev->mmio + reg);
-}
-
-static inline int lcdc_wait_bit(struct shmob_drm_device *sdev, u32 reg,
- u32 mask, u32 until)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(5);
-
- while ((lcdc_read(sdev, reg) & mask) != until) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cpu_relax();
- }
-
- return 0;
-}
-
-#endif /* __SHMOB_DRM_REGS_H__ */
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
set for each/sh, making the driver dead code except for the COMPILE_TEST
case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/gpu/drm/Kconfig | 2 -
drivers/gpu/drm/Makefile | 1 -
drivers/gpu/drm/shmobile/Kconfig | 12 -
drivers/gpu/drm/shmobile/Makefile | 8 -
.../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
.../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
15 files changed, 1976 deletions(-)
delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
delete mode 100644 drivers/gpu/drm/shmobile/Makefile
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 315cbdf6197927..1cb4bcb0714c87 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -286,8 +286,6 @@ source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
-source "drivers/gpu/drm/shmobile/Kconfig"
-
source "drivers/gpu/drm/sun4i/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index cc637343d87b09..87709cf7db8145 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -160,7 +160,6 @@ obj-$(CONFIG_DRM_AST) += ast/
obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
obj-y += rcar-du/
-obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-y += omapdrm/
obj-$(CONFIG_DRM_SUN4I) += sun4i/
obj-y += tilcdc/
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
deleted file mode 100644
index 4ec5dc74a6b0b8..00000000000000
--- a/drivers/gpu/drm/shmobile/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config DRM_SHMOBILE
- tristate "DRM Support for SH Mobile"
- depends on DRM && ARM
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select BACKLIGHT_CLASS_DEVICE
- select DRM_KMS_HELPER
- select DRM_GEM_DMA_HELPER
- help
- Choose this option if you have an SH Mobile chipset.
- If M is selected the module will be called shmob-drm.
-
diff --git a/drivers/gpu/drm/shmobile/Makefile b/drivers/gpu/drm/shmobile/Makefile
deleted file mode 100644
index 861edafed8562c..00000000000000
--- a/drivers/gpu/drm/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-shmob-drm-y := shmob_drm_backlight.o \
- shmob_drm_crtc.o \
- shmob_drm_drv.o \
- shmob_drm_kms.o \
- shmob_drm_plane.o
-
-obj-$(CONFIG_DRM_SHMOBILE) += shmob-drm.o
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c b/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
deleted file mode 100644
index 794573badfe860..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_backlight.c -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-
-static int shmob_drm_backlight_update(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- int brightness = backlight_get_brightness(bdev);
-
- return bdata->set_brightness(brightness);
-}
-
-static int shmob_drm_backlight_get_brightness(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
-
- return bdata->get_brightness();
-}
-
-static const struct backlight_ops shmob_drm_backlight_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .update_status = shmob_drm_backlight_update,
- .get_brightness = shmob_drm_backlight_get_brightness,
-};
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode)
-{
- if (scon->backlight == NULL)
- return;
-
- scon->backlight->props.power = mode == DRM_MODE_DPMS_ON
- ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
- backlight_update_status(scon->backlight);
-}
-
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon)
-{
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- struct drm_connector *connector = &scon->connector;
- struct drm_device *dev = connector->dev;
- struct backlight_device *backlight;
-
- if (!bdata->max_brightness)
- return 0;
-
- backlight = backlight_device_register(bdata->name, dev->dev, scon,
- &shmob_drm_backlight_ops, NULL);
- if (IS_ERR(backlight)) {
- dev_err(dev->dev, "unable to register backlight device: %ld\n",
- PTR_ERR(backlight));
- return PTR_ERR(backlight);
- }
-
- backlight->props.max_brightness = bdata->max_brightness;
- backlight->props.brightness = bdata->max_brightness;
- backlight->props.power = FB_BLANK_POWERDOWN;
- backlight_update_status(backlight);
-
- scon->backlight = backlight;
- return 0;
-}
-
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon)
-{
- backlight_device_unregister(scon->backlight);
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h b/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
deleted file mode 100644
index d9abb7a60be5c4..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_backlight.h -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_BACKLIGHT_H__
-#define __SHMOB_DRM_BACKLIGHT_H__
-
-struct shmob_drm_connector;
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode);
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon);
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon);
-
-#endif /* __SHMOB_DRM_BACKLIGHT_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
deleted file mode 100644
index 4624c0aff51ffa..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
+++ /dev/null
@@ -1,683 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_crtc.c -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-#include <linux/clk.h>
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/*
- * TODO: panel support
- */
-
-/* -----------------------------------------------------------------------------
- * Clock management
- */
-
-static int shmob_drm_clk_on(struct shmob_drm_device *sdev)
-{
- int ret;
-
- if (sdev->clock) {
- ret = clk_prepare_enable(sdev->clock);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static void shmob_drm_clk_off(struct shmob_drm_device *sdev)
-{
- if (sdev->clock)
- clk_disable_unprepare(sdev->clock);
-}
-
-/* -----------------------------------------------------------------------------
- * CRTC
- */
-
-static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct drm_display_mode *mode = &crtc->mode;
- u32 value;
-
- value = sdev->ldmt1r
- | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : LDMT1R_VPOL)
- | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : LDMT1R_HPOL)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWPOL) ? LDMT1R_DWPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DIPOL) ? LDMT1R_DIPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DAPOL) ? LDMT1R_DAPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_HSCNT) ? LDMT1R_HSCNT : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWCNT) ? LDMT1R_DWCNT : 0);
- lcdc_write(sdev, LDMT1R, value);
-
- if (idata->interface >= SHMOB_DRM_IFACE_SYS8A &&
- idata->interface <= SHMOB_DRM_IFACE_SYS24) {
- /* Setup SYS bus. */
- value = (idata->sys.cs_setup << LDMT2R_CSUP_SHIFT)
- | (idata->sys.vsync_active_high ? LDMT2R_RSV : 0)
- | (idata->sys.vsync_dir_input ? LDMT2R_VSEL : 0)
- | (idata->sys.write_setup << LDMT2R_WCSC_SHIFT)
- | (idata->sys.write_cycle << LDMT2R_WCEC_SHIFT)
- | (idata->sys.write_strobe << LDMT2R_WCLW_SHIFT);
- lcdc_write(sdev, LDMT2R, value);
-
- value = (idata->sys.read_latch << LDMT3R_RDLC_SHIFT)
- | (idata->sys.read_setup << LDMT3R_RCSC_SHIFT)
- | (idata->sys.read_cycle << LDMT3R_RCEC_SHIFT)
- | (idata->sys.read_strobe << LDMT3R_RCLW_SHIFT);
- lcdc_write(sdev, LDMT3R, value);
- }
-
- value = ((mode->hdisplay / 8) << 16) /* HDCN */
- | (mode->htotal / 8); /* HTCN */
- lcdc_write(sdev, LDHCNR, value);
-
- value = (((mode->hsync_end - mode->hsync_start) / 8) << 16) /* HSYNW */
- | (mode->hsync_start / 8); /* HSYNP */
- lcdc_write(sdev, LDHSYNR, value);
-
- value = ((mode->hdisplay & 7) << 24) | ((mode->htotal & 7) << 16)
- | (((mode->hsync_end - mode->hsync_start) & 7) << 8)
- | (mode->hsync_start & 7);
- lcdc_write(sdev, LDHAJR, value);
-
- value = ((mode->vdisplay) << 16) /* VDLN */
- | mode->vtotal; /* VTLN */
- lcdc_write(sdev, LDVLNR, value);
-
- value = ((mode->vsync_end - mode->vsync_start) << 16) /* VSYNW */
- | mode->vsync_start; /* VSYNP */
- lcdc_write(sdev, LDVSYNR, value);
-}
-
-static void shmob_drm_crtc_start_stop(struct shmob_drm_crtc *scrtc, bool start)
-{
- struct shmob_drm_device *sdev = scrtc->crtc.dev->dev_private;
- u32 value;
-
- value = lcdc_read(sdev, LDCNT2R);
- if (start)
- lcdc_write(sdev, LDCNT2R, value | LDCNT2R_DO);
- else
- lcdc_write(sdev, LDCNT2R, value & ~LDCNT2R_DO);
-
- /* Wait until power is applied/stopped. */
- while (1) {
- value = lcdc_read(sdev, LDPMR) & LDPMR_LPS;
- if ((start && value) || (!start && !value))
- break;
-
- cpu_relax();
- }
-
- if (!start) {
- /* Stop the dot clock. */
- lcdc_write(sdev, LDDCKSTPR, LDDCKSTPR_DCKSTP);
- }
-}
-
-/*
- * shmob_drm_crtc_start - Configure and start the LCDC
- * @scrtc: the SH Mobile CRTC
- *
- * Configure and start the LCDC device. External devices (clocks, MERAM, panels,
- * ...) are not touched by this function.
- */
-static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct shmob_drm_format_info *format;
- struct drm_device *dev = sdev->ddev;
- struct drm_plane *plane;
- u32 value;
- int ret;
-
- if (scrtc->started)
- return;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (WARN_ON(format == NULL))
- return;
-
- /* Enable clocks before accessing the hardware. */
- ret = shmob_drm_clk_on(sdev);
- if (ret < 0)
- return;
-
- /* Reset and enable the LCDC. */
- lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR);
- lcdc_wait_bit(sdev, LDCNT2R, LDCNT2R_BR, 0);
- lcdc_write(sdev, LDCNT2R, LDCNT2R_ME);
-
- /* Stop the LCDC first and disable all interrupts. */
- shmob_drm_crtc_start_stop(scrtc, false);
- lcdc_write(sdev, LDINTR, 0);
-
- /* Configure power supply, dot clocks and start them. */
- lcdc_write(sdev, LDPMR, 0);
-
- value = sdev->lddckr;
- if (idata->clk_div) {
- /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider
- * denominator.
- */
- lcdc_write(sdev, LDDCKPAT1R, 0);
- lcdc_write(sdev, LDDCKPAT2R, (1 << (idata->clk_div / 2)) - 1);
-
- if (idata->clk_div == 1)
- value |= LDDCKR_MOSEL;
- else
- value |= idata->clk_div;
- }
-
- lcdc_write(sdev, LDDCKR, value);
- lcdc_write(sdev, LDDCKSTPR, 0);
- lcdc_wait_bit(sdev, LDDCKSTPR, ~0, 0);
-
- /* TODO: Setup SYS panel */
-
- /* Setup geometry, format, frame buffer memory and operation mode. */
- shmob_drm_crtc_setup_geometry(scrtc);
-
- /* TODO: Handle YUV colorspaces. Hardcode REC709 for now. */
- lcdc_write(sdev, LDDFR, format->lddfr | LDDFR_CF1);
- lcdc_write(sdev, LDMLSR, scrtc->line_size);
- lcdc_write(sdev, LDSA1R, scrtc->dma[0]);
- if (format->yuv)
- lcdc_write(sdev, LDSA2R, scrtc->dma[1]);
- lcdc_write(sdev, LDSM1R, 0);
-
- /* Word and long word swap. */
- switch (format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- value = LDDDSR_LS | LDDDSR_WS;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- value = LDDDSR_LS | LDDDSR_WS | LDDDSR_BS;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- value = LDDDSR_LS;
- break;
- }
- lcdc_write(sdev, LDDDSR, value);
-
- /* Setup planes. */
- drm_for_each_legacy_plane(plane, dev) {
- if (plane->crtc == crtc)
- shmob_drm_plane_setup(plane);
- }
-
- /* Enable the display output. */
- lcdc_write(sdev, LDCNT1R, LDCNT1R_DE);
-
- shmob_drm_crtc_start_stop(scrtc, true);
-
- scrtc->started = true;
-}
-
-static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- if (!scrtc->started)
- return;
-
- /* Stop the LCDC. */
- shmob_drm_crtc_start_stop(scrtc, false);
-
- /* Disable the display output. */
- lcdc_write(sdev, LDCNT1R, 0);
-
- /* Stop clocks. */
- shmob_drm_clk_off(sdev);
-
- scrtc->started = false;
-}
-
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc)
-{
- shmob_drm_crtc_stop(scrtc);
-}
-
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc)
-{
- if (scrtc->dpms != DRM_MODE_DPMS_ON)
- return;
-
- shmob_drm_crtc_start(scrtc);
-}
-
-static void shmob_drm_crtc_compute_base(struct shmob_drm_crtc *scrtc,
- int x, int y)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct drm_framebuffer *fb = crtc->primary->fb;
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = scrtc->format->yuv ? 8 : scrtc->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- scrtc->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (scrtc->format->yuv) {
- bpp = scrtc->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- scrtc->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void shmob_drm_crtc_update_base(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_compute_base(scrtc, crtc->x, crtc->y);
-
- lcdc_write_mirror(sdev, LDSA1R, scrtc->dma[0]);
- if (scrtc->format->yuv)
- lcdc_write_mirror(sdev, LDSA2R, scrtc->dma[1]);
-
- lcdc_write(sdev, LDRCNTR, lcdc_read(sdev, LDRCNTR) ^ LDRCNTR_MRS);
-}
-
-#define to_shmob_crtc(c) container_of(c, struct shmob_drm_crtc, crtc)
-
-static void shmob_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
-
- if (scrtc->dpms == mode)
- return;
-
- if (mode == DRM_MODE_DPMS_ON)
- shmob_drm_crtc_start(scrtc);
- else
- shmob_drm_crtc_stop(scrtc);
-
- scrtc->dpms = mode;
-}
-
-static void shmob_drm_crtc_mode_prepare(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static int shmob_drm_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "mode_set: unsupported format %08x\n",
- crtc->primary->fb->format->format);
- return -EINVAL;
- }
-
- scrtc->format = format;
- scrtc->line_size = crtc->primary->fb->pitches[0];
-
- shmob_drm_crtc_compute_base(scrtc, x, y);
-
- return 0;
-}
-
-static void shmob_drm_crtc_mode_commit(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-static int shmob_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
-{
- shmob_drm_crtc_update_base(to_shmob_crtc(crtc));
-
- return 0;
-}
-
-static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
- .dpms = shmob_drm_crtc_dpms,
- .prepare = shmob_drm_crtc_mode_prepare,
- .commit = shmob_drm_crtc_mode_commit,
- .mode_set = shmob_drm_crtc_mode_set,
- .mode_set_base = shmob_drm_crtc_mode_set_base,
-};
-
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc)
-{
- struct drm_pending_vblank_event *event;
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- event = scrtc->event;
- scrtc->event = NULL;
- if (event) {
- drm_crtc_send_vblank_event(&scrtc->crtc, event);
- drm_crtc_vblank_put(&scrtc->crtc);
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-}
-
-static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_pending_vblank_event *event,
- uint32_t page_flip_flags,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- if (scrtc->event != NULL) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- return -EBUSY;
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-
- crtc->primary->fb = fb;
- shmob_drm_crtc_update_base(scrtc);
-
- if (event) {
- event->pipe = 0;
- drm_crtc_vblank_get(&scrtc->crtc);
- spin_lock_irqsave(&dev->event_lock, flags);
- scrtc->event = event;
- spin_unlock_irqrestore(&dev->event_lock, flags);
- }
-
- return 0;
-}
-
-static void shmob_drm_crtc_enable_vblank(struct shmob_drm_device *sdev,
- bool enable)
-{
- unsigned long flags;
- u32 ldintr;
-
- /* Be careful not to acknowledge any pending interrupt. */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- ldintr = lcdc_read(sdev, LDINTR) | LDINTR_STATUS_MASK;
- if (enable)
- ldintr |= LDINTR_VEE;
- else
- ldintr &= ~LDINTR_VEE;
- lcdc_write(sdev, LDINTR, ldintr);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-}
-
-static int shmob_drm_enable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, true);
-
- return 0;
-}
-
-static void shmob_drm_disable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, false);
-}
-
-static const struct drm_crtc_funcs crtc_funcs = {
- .destroy = drm_crtc_cleanup,
- .set_config = drm_crtc_helper_set_config,
- .page_flip = shmob_drm_crtc_page_flip,
- .enable_vblank = shmob_drm_enable_vblank,
- .disable_vblank = shmob_drm_disable_vblank,
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev)
-{
- struct drm_crtc *crtc = &sdev->crtc.crtc;
- int ret;
-
- sdev->crtc.dpms = DRM_MODE_DPMS_OFF;
-
- ret = drm_crtc_init(sdev->ddev, crtc, &crtc_funcs);
- if (ret < 0)
- return ret;
-
- drm_crtc_helper_add(crtc, &crtc_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Encoder
- */
-
-#define to_shmob_encoder(e) \
- container_of(e, struct shmob_drm_encoder, encoder)
-
-static void shmob_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct shmob_drm_encoder *senc = to_shmob_encoder(encoder);
- struct shmob_drm_device *sdev = encoder->dev->dev_private;
- struct shmob_drm_connector *scon = &sdev->connector;
-
- if (senc->dpms == mode)
- return;
-
- shmob_drm_backlight_dpms(scon, mode);
-
- senc->dpms = mode;
-}
-
-static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct shmob_drm_device *sdev = dev->dev_private;
- struct drm_connector *connector = &sdev->connector.connector;
- const struct drm_display_mode *panel_mode;
-
- if (list_empty(&connector->modes)) {
- dev_dbg(dev->dev, "mode_fixup: empty modes list\n");
- return false;
- }
-
- /* The flat panel mode is fixed, just copy it to the adjusted mode. */
- panel_mode = list_first_entry(&connector->modes,
- struct drm_display_mode, head);
- drm_mode_copy(adjusted_mode, panel_mode);
-
- return true;
-}
-
-static void shmob_drm_encoder_mode_prepare(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_commit(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
- .dpms = shmob_drm_encoder_dpms,
- .mode_fixup = shmob_drm_encoder_mode_fixup,
- .prepare = shmob_drm_encoder_mode_prepare,
- .commit = shmob_drm_encoder_mode_commit,
- .mode_set = shmob_drm_encoder_mode_set,
-};
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev)
-{
- struct drm_encoder *encoder = &sdev->encoder.encoder;
- int ret;
-
- sdev->encoder.dpms = DRM_MODE_DPMS_OFF;
-
- encoder->possible_crtcs = 1;
-
- ret = drm_simple_encoder_init(sdev->ddev, encoder,
- DRM_MODE_ENCODER_LVDS);
- if (ret < 0)
- return ret;
-
- drm_encoder_helper_add(encoder, &encoder_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Connector
- */
-
-#define to_shmob_connector(c) \
- container_of(c, struct shmob_drm_connector, connector)
-
-static int shmob_drm_connector_get_modes(struct drm_connector *connector)
-{
- struct shmob_drm_device *sdev = connector->dev->dev_private;
- struct drm_display_mode *mode;
-
- mode = drm_mode_create(connector->dev);
- if (mode == NULL)
- return 0;
-
- mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
- mode->clock = sdev->pdata->panel.mode.clock;
- mode->hdisplay = sdev->pdata->panel.mode.hdisplay;
- mode->hsync_start = sdev->pdata->panel.mode.hsync_start;
- mode->hsync_end = sdev->pdata->panel.mode.hsync_end;
- mode->htotal = sdev->pdata->panel.mode.htotal;
- mode->vdisplay = sdev->pdata->panel.mode.vdisplay;
- mode->vsync_start = sdev->pdata->panel.mode.vsync_start;
- mode->vsync_end = sdev->pdata->panel.mode.vsync_end;
- mode->vtotal = sdev->pdata->panel.mode.vtotal;
- mode->flags = sdev->pdata->panel.mode.flags;
-
- drm_mode_set_name(mode);
- drm_mode_probed_add(connector, mode);
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- return 1;
-}
-
-static struct drm_encoder *
-shmob_drm_connector_best_encoder(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- return scon->encoder;
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
- .get_modes = shmob_drm_connector_get_modes,
- .best_encoder = shmob_drm_connector_best_encoder,
-};
-
-static void shmob_drm_connector_destroy(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- shmob_drm_backlight_exit(scon);
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = shmob_drm_connector_destroy,
-};
-
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder)
-{
- struct drm_connector *connector = &sdev->connector.connector;
- int ret;
-
- sdev->connector.encoder = encoder;
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- ret = drm_connector_init(sdev->ddev, connector, &connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
- if (ret < 0)
- return ret;
-
- drm_connector_helper_add(connector, &connector_helper_funcs);
-
- ret = shmob_drm_backlight_init(&sdev->connector);
- if (ret < 0)
- goto err_cleanup;
-
- ret = drm_connector_attach_encoder(connector, encoder);
- if (ret < 0)
- goto err_backlight;
-
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
- drm_object_property_set_value(&connector->base,
- sdev->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
-
- return 0;
-
-err_backlight:
- shmob_drm_backlight_exit(&sdev->connector);
-err_cleanup:
- drm_connector_cleanup(connector);
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h b/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
deleted file mode 100644
index 21718843f46d3d..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_crtc.h -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_CRTC_H__
-#define __SHMOB_DRM_CRTC_H__
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_connector.h>
-#include <drm/drm_encoder.h>
-
-struct backlight_device;
-struct drm_pending_vblank_event;
-struct shmob_drm_device;
-struct shmob_drm_format_info;
-
-struct shmob_drm_crtc {
- struct drm_crtc crtc;
-
- struct drm_pending_vblank_event *event;
- int dpms;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
- unsigned int line_size;
- bool started;
-};
-
-struct shmob_drm_encoder {
- struct drm_encoder encoder;
- int dpms;
-};
-
-struct shmob_drm_connector {
- struct drm_connector connector;
- struct drm_encoder *encoder;
-
- struct backlight_device *backlight;
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev);
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc);
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev);
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder);
-
-#endif /* __SHMOB_DRM_CRTC_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
deleted file mode 100644
index 3d511fa3891364..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_drv.c -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_drv.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_module.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Hardware initialization
- */
-
-static int shmob_drm_init_interface(struct shmob_drm_device *sdev)
-{
- static const u32 ldmt1r[] = {
- [SHMOB_DRM_IFACE_RGB8] = LDMT1R_MIFTYP_RGB8,
- [SHMOB_DRM_IFACE_RGB9] = LDMT1R_MIFTYP_RGB9,
- [SHMOB_DRM_IFACE_RGB12A] = LDMT1R_MIFTYP_RGB12A,
- [SHMOB_DRM_IFACE_RGB12B] = LDMT1R_MIFTYP_RGB12B,
- [SHMOB_DRM_IFACE_RGB16] = LDMT1R_MIFTYP_RGB16,
- [SHMOB_DRM_IFACE_RGB18] = LDMT1R_MIFTYP_RGB18,
- [SHMOB_DRM_IFACE_RGB24] = LDMT1R_MIFTYP_RGB24,
- [SHMOB_DRM_IFACE_YUV422] = LDMT1R_MIFTYP_YCBCR,
- [SHMOB_DRM_IFACE_SYS8A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A,
- [SHMOB_DRM_IFACE_SYS8B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B,
- [SHMOB_DRM_IFACE_SYS8C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C,
- [SHMOB_DRM_IFACE_SYS8D] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D,
- [SHMOB_DRM_IFACE_SYS9] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS9,
- [SHMOB_DRM_IFACE_SYS12] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS12,
- [SHMOB_DRM_IFACE_SYS16A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A,
- [SHMOB_DRM_IFACE_SYS16B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B,
- [SHMOB_DRM_IFACE_SYS16C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C,
- [SHMOB_DRM_IFACE_SYS18] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS18,
- [SHMOB_DRM_IFACE_SYS24] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS24,
- };
-
- if (sdev->pdata->iface.interface >= ARRAY_SIZE(ldmt1r)) {
- dev_err(sdev->dev, "invalid interface type %u\n",
- sdev->pdata->iface.interface);
- return -EINVAL;
- }
-
- sdev->ldmt1r = ldmt1r[sdev->pdata->iface.interface];
- return 0;
-}
-
-static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev,
- enum shmob_drm_clk_source clksrc)
-{
- struct clk *clk;
- char *clkname;
-
- switch (clksrc) {
- case SHMOB_DRM_CLK_BUS:
- clkname = "bus_clk";
- sdev->lddckr = LDDCKR_ICKSEL_BUS;
- break;
- case SHMOB_DRM_CLK_PERIPHERAL:
- clkname = "peripheral_clk";
- sdev->lddckr = LDDCKR_ICKSEL_MIPI;
- break;
- case SHMOB_DRM_CLK_EXTERNAL:
- clkname = NULL;
- sdev->lddckr = LDDCKR_ICKSEL_HDMI;
- break;
- default:
- return -EINVAL;
- }
-
- clk = devm_clk_get(sdev->dev, clkname);
- if (IS_ERR(clk)) {
- dev_err(sdev->dev, "cannot get dot clock %s\n", clkname);
- return PTR_ERR(clk);
- }
-
- sdev->clock = clk;
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * DRM operations
- */
-
-static irqreturn_t shmob_drm_irq(int irq, void *arg)
-{
- struct drm_device *dev = arg;
- struct shmob_drm_device *sdev = dev->dev_private;
- unsigned long flags;
- u32 status;
-
- /* Acknowledge interrupts. Putting interrupt enable and interrupt flag
- * bits in the same register is really brain-dead design and requires
- * taking a spinlock.
- */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- status = lcdc_read(sdev, LDINTR);
- lcdc_write(sdev, LDINTR, status ^ LDINTR_STATUS_MASK);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-
- if (status & LDINTR_VES) {
- drm_handle_vblank(dev, 0);
- shmob_drm_crtc_finish_page_flip(&sdev->crtc);
- }
-
- return IRQ_HANDLED;
-}
-
-DEFINE_DRM_GEM_DMA_FOPS(shmob_drm_fops);
-
-static const struct drm_driver shmob_drm_driver = {
- .driver_features = DRIVER_GEM | DRIVER_MODESET,
- DRM_GEM_DMA_DRIVER_OPS,
- .fops = &shmob_drm_fops,
- .name = "shmob-drm",
- .desc = "Renesas SH Mobile DRM",
- .date = "20120424",
- .major = 1,
- .minor = 0,
-};
-
-/* -----------------------------------------------------------------------------
- * Power management
- */
-
-#ifdef CONFIG_PM_SLEEP
-static int shmob_drm_pm_suspend(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_kms_helper_poll_disable(sdev->ddev);
- shmob_drm_crtc_suspend(&sdev->crtc);
-
- return 0;
-}
-
-static int shmob_drm_pm_resume(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_modeset_lock_all(sdev->ddev);
- shmob_drm_crtc_resume(&sdev->crtc);
- drm_modeset_unlock_all(sdev->ddev);
-
- drm_kms_helper_poll_enable(sdev->ddev);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops shmob_drm_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(shmob_drm_pm_suspend, shmob_drm_pm_resume)
-};
-
-/* -----------------------------------------------------------------------------
- * Platform driver
- */
-
-static int shmob_drm_remove(struct platform_device *pdev)
-{
- struct shmob_drm_device *sdev = platform_get_drvdata(pdev);
- struct drm_device *ddev = sdev->ddev;
-
- drm_dev_unregister(ddev);
- drm_kms_helper_poll_fini(ddev);
- free_irq(sdev->irq, ddev);
- drm_dev_put(ddev);
-
- return 0;
-}
-
-static int shmob_drm_probe(struct platform_device *pdev)
-{
- struct shmob_drm_platform_data *pdata = pdev->dev.platform_data;
- struct shmob_drm_device *sdev;
- struct drm_device *ddev;
- unsigned int i;
- int ret;
-
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
- /*
- * Allocate and initialize the driver private data, I/O resources and
- * clocks.
- */
- sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL);
- if (sdev == NULL)
- return -ENOMEM;
-
- sdev->dev = &pdev->dev;
- sdev->pdata = pdata;
- spin_lock_init(&sdev->irq_lock);
-
- platform_set_drvdata(pdev, sdev);
-
- sdev->mmio = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(sdev->mmio))
- return PTR_ERR(sdev->mmio);
-
- ret = shmob_drm_setup_clocks(sdev, pdata->clk_source);
- if (ret < 0)
- return ret;
-
- ret = shmob_drm_init_interface(sdev);
- if (ret < 0)
- return ret;
-
- /* Allocate and initialize the DRM device. */
- ddev = drm_dev_alloc(&shmob_drm_driver, &pdev->dev);
- if (IS_ERR(ddev))
- return PTR_ERR(ddev);
-
- sdev->ddev = ddev;
- ddev->dev_private = sdev;
-
- ret = shmob_drm_modeset_init(sdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize mode setting\n");
- goto err_free_drm_dev;
- }
-
- for (i = 0; i < 4; ++i) {
- ret = shmob_drm_plane_create(sdev, i);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to create plane %u\n", i);
- goto err_modeset_cleanup;
- }
- }
-
- ret = drm_vblank_init(ddev, 1);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize vblank\n");
- goto err_modeset_cleanup;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto err_modeset_cleanup;
- sdev->irq = ret;
-
- ret = request_irq(sdev->irq, shmob_drm_irq, 0, ddev->driver->name,
- ddev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to install IRQ handler\n");
- goto err_modeset_cleanup;
- }
-
- /*
- * Register the DRM device with the core and the connectors with
- * sysfs.
- */
- ret = drm_dev_register(ddev, 0);
- if (ret < 0)
- goto err_irq_uninstall;
-
- return 0;
-
-err_irq_uninstall:
- free_irq(sdev->irq, ddev);
-err_modeset_cleanup:
- drm_kms_helper_poll_fini(ddev);
-err_free_drm_dev:
- drm_dev_put(ddev);
-
- return ret;
-}
-
-static struct platform_driver shmob_drm_platform_driver = {
- .probe = shmob_drm_probe,
- .remove = shmob_drm_remove,
- .driver = {
- .name = "shmob-drm",
- .pm = &shmob_drm_pm_ops,
- },
-};
-
-drm_module_platform_driver(shmob_drm_platform_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_DESCRIPTION("Renesas SH Mobile DRM Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.h b/drivers/gpu/drm/shmobile/shmob_drm_drv.h
deleted file mode 100644
index 4964ddd5ab7472..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm.h -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_DRV_H__
-#define __SHMOB_DRM_DRV_H__
-
-#include <linux/kernel.h>
-#include <linux/platform_data/shmob_drm.h>
-#include <linux/spinlock.h>
-
-#include "shmob_drm_crtc.h"
-
-struct clk;
-struct device;
-struct drm_device;
-
-struct shmob_drm_device {
- struct device *dev;
- const struct shmob_drm_platform_data *pdata;
-
- void __iomem *mmio;
- struct clk *clock;
- u32 lddckr;
- u32 ldmt1r;
-
- unsigned int irq;
- spinlock_t irq_lock; /* Protects hardware LDINTR register */
-
- struct drm_device *ddev;
-
- struct shmob_drm_crtc crtc;
- struct shmob_drm_encoder encoder;
- struct shmob_drm_connector connector;
-};
-
-#endif /* __SHMOB_DRM_DRV_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/shmobile/shmob_drm_kms.c
deleted file mode 100644
index 60a2c8d8a0d947..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_kms.c -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_probe_helper.h>
-
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Format helpers
- */
-
-static const struct shmob_drm_format_info shmob_drm_format_infos[] = {
- {
- .fourcc = DRM_FORMAT_RGB565,
- .bpp = 16,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB16,
- }, {
- .fourcc = DRM_FORMAT_RGB888,
- .bpp = 24,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB24,
- }, {
- .fourcc = DRM_FORMAT_ARGB8888,
- .bpp = 32,
- .yuv = false,
- .lddfr = LDDFR_PKF_ARGB32,
- }, {
- .fourcc = DRM_FORMAT_NV12,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV21,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV16,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV61,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV24,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- }, {
- .fourcc = DRM_FORMAT_NV42,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- },
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(shmob_drm_format_infos); ++i) {
- if (shmob_drm_format_infos[i].fourcc == fourcc)
- return &shmob_drm_format_infos[i];
- }
-
- return NULL;
-}
-
-/* -----------------------------------------------------------------------------
- * Frame buffer
- */
-
-static struct drm_framebuffer *
-shmob_drm_fb_create(struct drm_device *dev, struct drm_file *file_priv,
- const struct drm_mode_fb_cmd2 *mode_cmd)
-{
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(mode_cmd->pixel_format);
- if (format == NULL) {
- dev_dbg(dev->dev, "unsupported pixel format %08x\n",
- mode_cmd->pixel_format);
- return ERR_PTR(-EINVAL);
- }
-
- if (mode_cmd->pitches[0] & 7 || mode_cmd->pitches[0] >= 65536) {
- dev_dbg(dev->dev, "invalid pitch value %u\n",
- mode_cmd->pitches[0]);
- return ERR_PTR(-EINVAL);
- }
-
- if (format->yuv) {
- unsigned int chroma_cpp = format->bpp == 24 ? 2 : 1;
-
- if (mode_cmd->pitches[1] != mode_cmd->pitches[0] * chroma_cpp) {
- dev_dbg(dev->dev,
- "luma and chroma pitches do not match\n");
- return ERR_PTR(-EINVAL);
- }
- }
-
- return drm_gem_fb_create(dev, file_priv, mode_cmd);
-}
-
-static const struct drm_mode_config_funcs shmob_drm_mode_config_funcs = {
- .fb_create = shmob_drm_fb_create,
-};
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev)
-{
- int ret;
-
- ret = drmm_mode_config_init(sdev->ddev);
- if (ret)
- return ret;
-
- shmob_drm_crtc_create(sdev);
- shmob_drm_encoder_create(sdev);
- shmob_drm_connector_create(sdev, &sdev->encoder.encoder);
-
- drm_kms_helper_poll_init(sdev->ddev);
-
- sdev->ddev->mode_config.min_width = 0;
- sdev->ddev->mode_config.min_height = 0;
- sdev->ddev->mode_config.max_width = 4095;
- sdev->ddev->mode_config.max_height = 4095;
- sdev->ddev->mode_config.funcs = &shmob_drm_mode_config_funcs;
-
- drm_helper_disable_unused_functions(sdev->ddev);
-
- return 0;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.h b/drivers/gpu/drm/shmobile/shmob_drm_kms.h
deleted file mode 100644
index 0347b1fd2338a8..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_kms.h -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_KMS_H__
-#define __SHMOB_DRM_KMS_H__
-
-#include <linux/types.h>
-
-struct drm_gem_dma_object;
-struct shmob_drm_device;
-
-struct shmob_drm_format_info {
- u32 fourcc;
- unsigned int bpp;
- bool yuv;
- u32 lddfr;
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc);
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev);
-
-#endif /* __SHMOB_DRM_KMS_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.c b/drivers/gpu/drm/shmobile/shmob_drm_plane.c
deleted file mode 100644
index 6c5f0cbe7d95b9..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_plane.c -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-struct shmob_drm_plane {
- struct drm_plane plane;
- unsigned int index;
- unsigned int alpha;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
-
- unsigned int src_x;
- unsigned int src_y;
- unsigned int crtc_x;
- unsigned int crtc_y;
- unsigned int crtc_w;
- unsigned int crtc_h;
-};
-
-#define to_shmob_plane(p) container_of(p, struct shmob_drm_plane, plane)
-
-static void shmob_drm_plane_compute_base(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb,
- int x, int y)
-{
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = splane->format->yuv ? 8 : splane->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- splane->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (splane->format->yuv) {
- bpp = splane->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- splane->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void __shmob_drm_plane_setup(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb)
-{
- struct shmob_drm_device *sdev = splane->plane.dev->dev_private;
- u32 format;
-
- /* TODO: Support ROP3 mode */
- format = LDBBSIFR_EN | (splane->alpha << LDBBSIFR_LAY_SHIFT);
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW | LDBBSIFR_SWPB;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- format |= LDBBSIFR_SWPL;
- break;
- }
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB16;
- break;
- case DRM_FORMAT_RGB888:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB24;
- break;
- case DRM_FORMAT_ARGB8888:
- format |= LDBBSIFR_AL_PK | LDBBSIFR_RY | LDDFR_PKF_ARGB32;
- break;
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV21:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_420;
- break;
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV61:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_422;
- break;
- case DRM_FORMAT_NV24:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_444;
- break;
- }
-
-#define plane_reg_dump(sdev, splane, reg) \
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x 0x%08x\n", __func__, \
- splane->index, #reg, \
- lcdc_read(sdev, reg(splane->index)), \
- lcdc_read(sdev, reg(splane->index) + LCDC_SIDE_B_OFFSET))
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-
- lcdc_write(sdev, LDBCR, LDBCR_UPC(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), format);
-
- lcdc_write(sdev, LDBnBSSZR(splane->index),
- (splane->crtc_h << LDBBSSZR_BVSS_SHIFT) |
- (splane->crtc_w << LDBBSSZR_BHSS_SHIFT));
- lcdc_write(sdev, LDBnBLOCR(splane->index),
- (splane->crtc_y << LDBBLOCR_CVLC_SHIFT) |
- (splane->crtc_x << LDBBLOCR_CHLC_SHIFT));
- lcdc_write(sdev, LDBnBSMWR(splane->index),
- fb->pitches[0] << LDBBSMWR_BSMW_SHIFT);
-
- shmob_drm_plane_compute_base(splane, fb, splane->src_x, splane->src_y);
-
- lcdc_write(sdev, LDBnBSAYR(splane->index), splane->dma[0]);
- if (splane->format->yuv)
- lcdc_write(sdev, LDBnBSACR(splane->index), splane->dma[1]);
-
- lcdc_write(sdev, LDBCR,
- LDBCR_UPF(splane->index) | LDBCR_UPD(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-}
-
-void shmob_drm_plane_setup(struct drm_plane *plane)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
-
- if (plane->fb == NULL)
- return;
-
- __shmob_drm_plane_setup(splane, plane->fb);
-}
-
-static int
-shmob_drm_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "update_plane: unsupported format %08x\n",
- fb->format->format);
- return -EINVAL;
- }
-
- if (src_w >> 16 != crtc_w || src_h >> 16 != crtc_h) {
- dev_dbg(sdev->dev, "%s: scaling not supported\n", __func__);
- return -EINVAL;
- }
-
- splane->format = format;
-
- splane->src_x = src_x >> 16;
- splane->src_y = src_y >> 16;
- splane->crtc_x = crtc_x;
- splane->crtc_y = crtc_y;
- splane->crtc_w = crtc_w;
- splane->crtc_h = crtc_h;
-
- __shmob_drm_plane_setup(splane, fb);
- return 0;
-}
-
-static int shmob_drm_plane_disable(struct drm_plane *plane,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
-
- splane->format = NULL;
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), 0);
- return 0;
-}
-
-static void shmob_drm_plane_destroy(struct drm_plane *plane)
-{
- drm_plane_force_disable(plane);
- drm_plane_cleanup(plane);
-}
-
-static const struct drm_plane_funcs shmob_drm_plane_funcs = {
- .update_plane = shmob_drm_plane_update,
- .disable_plane = shmob_drm_plane_disable,
- .destroy = shmob_drm_plane_destroy,
-};
-
-static const uint32_t formats[] = {
- DRM_FORMAT_RGB565,
- DRM_FORMAT_RGB888,
- DRM_FORMAT_ARGB8888,
- DRM_FORMAT_NV12,
- DRM_FORMAT_NV21,
- DRM_FORMAT_NV16,
- DRM_FORMAT_NV61,
- DRM_FORMAT_NV24,
- DRM_FORMAT_NV42,
-};
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index)
-{
- struct shmob_drm_plane *splane;
- int ret;
-
- splane = devm_kzalloc(sdev->dev, sizeof(*splane), GFP_KERNEL);
- if (splane == NULL)
- return -ENOMEM;
-
- splane->index = index;
- splane->alpha = 255;
-
- ret = drm_universal_plane_init(sdev->ddev, &splane->plane, 1,
- &shmob_drm_plane_funcs,
- formats, ARRAY_SIZE(formats), NULL,
- DRM_PLANE_TYPE_OVERLAY, NULL);
-
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.h b/drivers/gpu/drm/shmobile/shmob_drm_plane.h
deleted file mode 100644
index e72b21a4288fc2..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_plane.h -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_PLANE_H__
-#define __SHMOB_DRM_PLANE_H__
-
-struct drm_plane;
-struct shmob_drm_device;
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index);
-void shmob_drm_plane_setup(struct drm_plane *plane);
-
-#endif /* __SHMOB_DRM_PLANE_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_regs.h b/drivers/gpu/drm/shmobile/shmob_drm_regs.h
deleted file mode 100644
index 058533685c4cd0..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_regs.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_regs.h -- SH Mobile DRM registers
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_REGS_H__
-#define __SHMOB_DRM_REGS_H__
-
-#include <linux/io.h>
-#include <linux/jiffies.h>
-
-#include "shmob_drm_drv.h"
-
-/* Register definitions */
-#define LDDCKPAT1R 0x400
-#define LDDCKPAT2R 0x404
-#define LDDCKR 0x410
-#define LDDCKR_ICKSEL_BUS (0 << 16)
-#define LDDCKR_ICKSEL_MIPI (1 << 16)
-#define LDDCKR_ICKSEL_HDMI (2 << 16)
-#define LDDCKR_ICKSEL_EXT (3 << 16)
-#define LDDCKR_ICKSEL_MASK (7 << 16)
-#define LDDCKR_MOSEL (1 << 6)
-#define LDDCKSTPR 0x414
-#define LDDCKSTPR_DCKSTS (1 << 16)
-#define LDDCKSTPR_DCKSTP (1 << 0)
-#define LDMT1R 0x418
-#define LDMT1R_VPOL (1 << 28)
-#define LDMT1R_HPOL (1 << 27)
-#define LDMT1R_DWPOL (1 << 26)
-#define LDMT1R_DIPOL (1 << 25)
-#define LDMT1R_DAPOL (1 << 24)
-#define LDMT1R_HSCNT (1 << 17)
-#define LDMT1R_DWCNT (1 << 16)
-#define LDMT1R_IFM (1 << 12)
-#define LDMT1R_MIFTYP_RGB8 (0x0 << 0)
-#define LDMT1R_MIFTYP_RGB9 (0x4 << 0)
-#define LDMT1R_MIFTYP_RGB12A (0x5 << 0)
-#define LDMT1R_MIFTYP_RGB12B (0x6 << 0)
-#define LDMT1R_MIFTYP_RGB16 (0x7 << 0)
-#define LDMT1R_MIFTYP_RGB18 (0xa << 0)
-#define LDMT1R_MIFTYP_RGB24 (0xb << 0)
-#define LDMT1R_MIFTYP_YCBCR (0xf << 0)
-#define LDMT1R_MIFTYP_SYS8A (0x0 << 0)
-#define LDMT1R_MIFTYP_SYS8B (0x1 << 0)
-#define LDMT1R_MIFTYP_SYS8C (0x2 << 0)
-#define LDMT1R_MIFTYP_SYS8D (0x3 << 0)
-#define LDMT1R_MIFTYP_SYS9 (0x4 << 0)
-#define LDMT1R_MIFTYP_SYS12 (0x5 << 0)
-#define LDMT1R_MIFTYP_SYS16A (0x7 << 0)
-#define LDMT1R_MIFTYP_SYS16B (0x8 << 0)
-#define LDMT1R_MIFTYP_SYS16C (0x9 << 0)
-#define LDMT1R_MIFTYP_SYS18 (0xa << 0)
-#define LDMT1R_MIFTYP_SYS24 (0xb << 0)
-#define LDMT1R_MIFTYP_MASK (0xf << 0)
-#define LDMT2R 0x41c
-#define LDMT2R_CSUP_MASK (7 << 26)
-#define LDMT2R_CSUP_SHIFT 26
-#define LDMT2R_RSV (1 << 25)
-#define LDMT2R_VSEL (1 << 24)
-#define LDMT2R_WCSC_MASK (0xff << 16)
-#define LDMT2R_WCSC_SHIFT 16
-#define LDMT2R_WCEC_MASK (0xff << 8)
-#define LDMT2R_WCEC_SHIFT 8
-#define LDMT2R_WCLW_MASK (0xff << 0)
-#define LDMT2R_WCLW_SHIFT 0
-#define LDMT3R 0x420
-#define LDMT3R_RDLC_MASK (0x3f << 24)
-#define LDMT3R_RDLC_SHIFT 24
-#define LDMT3R_RCSC_MASK (0xff << 16)
-#define LDMT3R_RCSC_SHIFT 16
-#define LDMT3R_RCEC_MASK (0xff << 8)
-#define LDMT3R_RCEC_SHIFT 8
-#define LDMT3R_RCLW_MASK (0xff << 0)
-#define LDMT3R_RCLW_SHIFT 0
-#define LDDFR 0x424
-#define LDDFR_CF1 (1 << 18)
-#define LDDFR_CF0 (1 << 17)
-#define LDDFR_CC (1 << 16)
-#define LDDFR_YF_420 (0 << 8)
-#define LDDFR_YF_422 (1 << 8)
-#define LDDFR_YF_444 (2 << 8)
-#define LDDFR_YF_MASK (3 << 8)
-#define LDDFR_PKF_ARGB32 (0x00 << 0)
-#define LDDFR_PKF_RGB16 (0x03 << 0)
-#define LDDFR_PKF_RGB24 (0x0b << 0)
-#define LDDFR_PKF_MASK (0x1f << 0)
-#define LDSM1R 0x428
-#define LDSM1R_OS (1 << 0)
-#define LDSM2R 0x42c
-#define LDSM2R_OSTRG (1 << 0)
-#define LDSA1R 0x430
-#define LDSA2R 0x434
-#define LDMLSR 0x438
-#define LDWBFR 0x43c
-#define LDWBCNTR 0x440
-#define LDWBAR 0x444
-#define LDHCNR 0x448
-#define LDHSYNR 0x44c
-#define LDVLNR 0x450
-#define LDVSYNR 0x454
-#define LDHPDR 0x458
-#define LDVPDR 0x45c
-#define LDPMR 0x460
-#define LDPMR_LPS (3 << 0)
-#define LDINTR 0x468
-#define LDINTR_FE (1 << 10)
-#define LDINTR_VSE (1 << 9)
-#define LDINTR_VEE (1 << 8)
-#define LDINTR_FS (1 << 2)
-#define LDINTR_VSS (1 << 1)
-#define LDINTR_VES (1 << 0)
-#define LDINTR_STATUS_MASK (0xff << 0)
-#define LDSR 0x46c
-#define LDSR_MSS (1 << 10)
-#define LDSR_MRS (1 << 8)
-#define LDSR_AS (1 << 1)
-#define LDCNT1R 0x470
-#define LDCNT1R_DE (1 << 0)
-#define LDCNT2R 0x474
-#define LDCNT2R_BR (1 << 8)
-#define LDCNT2R_MD (1 << 3)
-#define LDCNT2R_SE (1 << 2)
-#define LDCNT2R_ME (1 << 1)
-#define LDCNT2R_DO (1 << 0)
-#define LDRCNTR 0x478
-#define LDRCNTR_SRS (1 << 17)
-#define LDRCNTR_SRC (1 << 16)
-#define LDRCNTR_MRS (1 << 1)
-#define LDRCNTR_MRC (1 << 0)
-#define LDDDSR 0x47c
-#define LDDDSR_LS (1 << 2)
-#define LDDDSR_WS (1 << 1)
-#define LDDDSR_BS (1 << 0)
-#define LDHAJR 0x4a0
-
-#define LDDWD0R 0x800
-#define LDDWDxR_WDACT (1 << 28)
-#define LDDWDxR_RSW (1 << 24)
-#define LDDRDR 0x840
-#define LDDRDR_RSR (1 << 24)
-#define LDDRDR_DRD_MASK (0x3ffff << 0)
-#define LDDWAR 0x900
-#define LDDWAR_WA (1 << 0)
-#define LDDRAR 0x904
-#define LDDRAR_RA (1 << 0)
-
-#define LDBCR 0xb00
-#define LDBCR_UPC(n) (1 << ((n) + 16))
-#define LDBCR_UPF(n) (1 << ((n) + 8))
-#define LDBCR_UPD(n) (1 << ((n) + 0))
-#define LDBnBSIFR(n) (0xb20 + (n) * 0x20 + 0x00)
-#define LDBBSIFR_EN (1 << 31)
-#define LDBBSIFR_VS (1 << 29)
-#define LDBBSIFR_BRSEL (1 << 28)
-#define LDBBSIFR_MX (1 << 27)
-#define LDBBSIFR_MY (1 << 26)
-#define LDBBSIFR_CV3 (3 << 24)
-#define LDBBSIFR_CV2 (2 << 24)
-#define LDBBSIFR_CV1 (1 << 24)
-#define LDBBSIFR_CV0 (0 << 24)
-#define LDBBSIFR_CV_MASK (3 << 24)
-#define LDBBSIFR_LAY_MASK (0xff << 16)
-#define LDBBSIFR_LAY_SHIFT 16
-#define LDBBSIFR_ROP3_MASK (0xff << 16)
-#define LDBBSIFR_ROP3_SHIFT 16
-#define LDBBSIFR_AL_PL8 (3 << 14)
-#define LDBBSIFR_AL_PL1 (2 << 14)
-#define LDBBSIFR_AL_PK (1 << 14)
-#define LDBBSIFR_AL_1 (0 << 14)
-#define LDBBSIFR_AL_MASK (3 << 14)
-#define LDBBSIFR_SWPL (1 << 10)
-#define LDBBSIFR_SWPW (1 << 9)
-#define LDBBSIFR_SWPB (1 << 8)
-#define LDBBSIFR_RY (1 << 7)
-#define LDBBSIFR_CHRR_420 (2 << 0)
-#define LDBBSIFR_CHRR_422 (1 << 0)
-#define LDBBSIFR_CHRR_444 (0 << 0)
-#define LDBBSIFR_RPKF_ARGB32 (0x00 << 0)
-#define LDBBSIFR_RPKF_RGB16 (0x03 << 0)
-#define LDBBSIFR_RPKF_RGB24 (0x0b << 0)
-#define LDBBSIFR_RPKF_MASK (0x1f << 0)
-#define LDBnBSSZR(n) (0xb20 + (n) * 0x20 + 0x04)
-#define LDBBSSZR_BVSS_MASK (0xfff << 16)
-#define LDBBSSZR_BVSS_SHIFT 16
-#define LDBBSSZR_BHSS_MASK (0xfff << 0)
-#define LDBBSSZR_BHSS_SHIFT 0
-#define LDBnBLOCR(n) (0xb20 + (n) * 0x20 + 0x08)
-#define LDBBLOCR_CVLC_MASK (0xfff << 16)
-#define LDBBLOCR_CVLC_SHIFT 16
-#define LDBBLOCR_CHLC_MASK (0xfff << 0)
-#define LDBBLOCR_CHLC_SHIFT 0
-#define LDBnBSMWR(n) (0xb20 + (n) * 0x20 + 0x0c)
-#define LDBBSMWR_BSMWA_MASK (0xffff << 16)
-#define LDBBSMWR_BSMWA_SHIFT 16
-#define LDBBSMWR_BSMW_MASK (0xffff << 0)
-#define LDBBSMWR_BSMW_SHIFT 0
-#define LDBnBSAYR(n) (0xb20 + (n) * 0x20 + 0x10)
-#define LDBBSAYR_FG1A_MASK (0xff << 24)
-#define LDBBSAYR_FG1A_SHIFT 24
-#define LDBBSAYR_FG1R_MASK (0xff << 16)
-#define LDBBSAYR_FG1R_SHIFT 16
-#define LDBBSAYR_FG1G_MASK (0xff << 8)
-#define LDBBSAYR_FG1G_SHIFT 8
-#define LDBBSAYR_FG1B_MASK (0xff << 0)
-#define LDBBSAYR_FG1B_SHIFT 0
-#define LDBnBSACR(n) (0xb20 + (n) * 0x20 + 0x14)
-#define LDBBSACR_FG2A_MASK (0xff << 24)
-#define LDBBSACR_FG2A_SHIFT 24
-#define LDBBSACR_FG2R_MASK (0xff << 16)
-#define LDBBSACR_FG2R_SHIFT 16
-#define LDBBSACR_FG2G_MASK (0xff << 8)
-#define LDBBSACR_FG2G_SHIFT 8
-#define LDBBSACR_FG2B_MASK (0xff << 0)
-#define LDBBSACR_FG2B_SHIFT 0
-#define LDBnBSAAR(n) (0xb20 + (n) * 0x20 + 0x18)
-#define LDBBSAAR_AP_MASK (0xff << 24)
-#define LDBBSAAR_AP_SHIFT 24
-#define LDBBSAAR_R_MASK (0xff << 16)
-#define LDBBSAAR_R_SHIFT 16
-#define LDBBSAAR_GY_MASK (0xff << 8)
-#define LDBBSAAR_GY_SHIFT 8
-#define LDBBSAAR_B_MASK (0xff << 0)
-#define LDBBSAAR_B_SHIFT 0
-#define LDBnBPPCR(n) (0xb20 + (n) * 0x20 + 0x1c)
-#define LDBBPPCR_AP_MASK (0xff << 24)
-#define LDBBPPCR_AP_SHIFT 24
-#define LDBBPPCR_R_MASK (0xff << 16)
-#define LDBBPPCR_R_SHIFT 16
-#define LDBBPPCR_GY_MASK (0xff << 8)
-#define LDBBPPCR_GY_SHIFT 8
-#define LDBBPPCR_B_MASK (0xff << 0)
-#define LDBBPPCR_B_SHIFT 0
-#define LDBnBBGCL(n) (0xb10 + (n) * 0x04)
-#define LDBBBGCL_BGA_MASK (0xff << 24)
-#define LDBBBGCL_BGA_SHIFT 24
-#define LDBBBGCL_BGR_MASK (0xff << 16)
-#define LDBBBGCL_BGR_SHIFT 16
-#define LDBBBGCL_BGG_MASK (0xff << 8)
-#define LDBBBGCL_BGG_SHIFT 8
-#define LDBBBGCL_BGB_MASK (0xff << 0)
-#define LDBBBGCL_BGB_SHIFT 0
-
-#define LCDC_SIDE_B_OFFSET 0x1000
-#define LCDC_MIRROR_OFFSET 0x2000
-
-static inline bool lcdc_is_banked(u32 reg)
-{
- switch (reg) {
- case LDMT1R:
- case LDMT2R:
- case LDMT3R:
- case LDDFR:
- case LDSM1R:
- case LDSA1R:
- case LDSA2R:
- case LDMLSR:
- case LDWBFR:
- case LDWBCNTR:
- case LDWBAR:
- case LDHCNR:
- case LDHSYNR:
- case LDVLNR:
- case LDVSYNR:
- case LDHPDR:
- case LDVPDR:
- case LDHAJR:
- return true;
- default:
- return reg >= LDBnBBGCL(0) && reg <= LDBnBPPCR(3);
- }
-}
-
-static inline void lcdc_write_mirror(struct shmob_drm_device *sdev, u32 reg,
- u32 data)
-{
- iowrite32(data, sdev->mmio + reg + LCDC_MIRROR_OFFSET);
-}
-
-static inline void lcdc_write(struct shmob_drm_device *sdev, u32 reg, u32 data)
-{
- iowrite32(data, sdev->mmio + reg);
- if (lcdc_is_banked(reg))
- iowrite32(data, sdev->mmio + reg + LCDC_SIDE_B_OFFSET);
-}
-
-static inline u32 lcdc_read(struct shmob_drm_device *sdev, u32 reg)
-{
- return ioread32(sdev->mmio + reg);
-}
-
-static inline int lcdc_wait_bit(struct shmob_drm_device *sdev, u32 reg,
- u32 mask, u32 until)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(5);
-
- while ((lcdc_read(sdev, reg) & mask) != until) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cpu_relax();
- }
-
- return 0;
-}
-
-#endif /* __SHMOB_DRM_REGS_H__ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
set for each/sh, making the driver dead code except for the COMPILE_TEST
case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/gpu/drm/Kconfig | 2 -
drivers/gpu/drm/Makefile | 1 -
drivers/gpu/drm/shmobile/Kconfig | 12 -
drivers/gpu/drm/shmobile/Makefile | 8 -
.../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
.../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
15 files changed, 1976 deletions(-)
delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
delete mode 100644 drivers/gpu/drm/shmobile/Makefile
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 315cbdf6197927..1cb4bcb0714c87 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -286,8 +286,6 @@ source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
-source "drivers/gpu/drm/shmobile/Kconfig"
-
source "drivers/gpu/drm/sun4i/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index cc637343d87b09..87709cf7db8145 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -160,7 +160,6 @@ obj-$(CONFIG_DRM_AST) += ast/
obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
obj-y += rcar-du/
-obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-y += omapdrm/
obj-$(CONFIG_DRM_SUN4I) += sun4i/
obj-y += tilcdc/
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig
deleted file mode 100644
index 4ec5dc74a6b0b8..00000000000000
--- a/drivers/gpu/drm/shmobile/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config DRM_SHMOBILE
- tristate "DRM Support for SH Mobile"
- depends on DRM && ARM
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select BACKLIGHT_CLASS_DEVICE
- select DRM_KMS_HELPER
- select DRM_GEM_DMA_HELPER
- help
- Choose this option if you have an SH Mobile chipset.
- If M is selected the module will be called shmob-drm.
-
diff --git a/drivers/gpu/drm/shmobile/Makefile b/drivers/gpu/drm/shmobile/Makefile
deleted file mode 100644
index 861edafed8562c..00000000000000
--- a/drivers/gpu/drm/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-shmob-drm-y := shmob_drm_backlight.o \
- shmob_drm_crtc.o \
- shmob_drm_drv.o \
- shmob_drm_kms.o \
- shmob_drm_plane.o
-
-obj-$(CONFIG_DRM_SHMOBILE) += shmob-drm.o
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c b/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
deleted file mode 100644
index 794573badfe860..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_backlight.c -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-
-static int shmob_drm_backlight_update(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- int brightness = backlight_get_brightness(bdev);
-
- return bdata->set_brightness(brightness);
-}
-
-static int shmob_drm_backlight_get_brightness(struct backlight_device *bdev)
-{
- struct shmob_drm_connector *scon = bl_get_data(bdev);
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
-
- return bdata->get_brightness();
-}
-
-static const struct backlight_ops shmob_drm_backlight_ops = {
- .options = BL_CORE_SUSPENDRESUME,
- .update_status = shmob_drm_backlight_update,
- .get_brightness = shmob_drm_backlight_get_brightness,
-};
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode)
-{
- if (scon->backlight == NULL)
- return;
-
- scon->backlight->props.power = mode == DRM_MODE_DPMS_ON
- ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
- backlight_update_status(scon->backlight);
-}
-
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon)
-{
- struct shmob_drm_device *sdev = scon->connector.dev->dev_private;
- const struct shmob_drm_backlight_data *bdata = &sdev->pdata->backlight;
- struct drm_connector *connector = &scon->connector;
- struct drm_device *dev = connector->dev;
- struct backlight_device *backlight;
-
- if (!bdata->max_brightness)
- return 0;
-
- backlight = backlight_device_register(bdata->name, dev->dev, scon,
- &shmob_drm_backlight_ops, NULL);
- if (IS_ERR(backlight)) {
- dev_err(dev->dev, "unable to register backlight device: %ld\n",
- PTR_ERR(backlight));
- return PTR_ERR(backlight);
- }
-
- backlight->props.max_brightness = bdata->max_brightness;
- backlight->props.brightness = bdata->max_brightness;
- backlight->props.power = FB_BLANK_POWERDOWN;
- backlight_update_status(backlight);
-
- scon->backlight = backlight;
- return 0;
-}
-
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon)
-{
- backlight_device_unregister(scon->backlight);
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h b/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
deleted file mode 100644
index d9abb7a60be5c4..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_backlight.h -- SH Mobile DRM Backlight
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_BACKLIGHT_H__
-#define __SHMOB_DRM_BACKLIGHT_H__
-
-struct shmob_drm_connector;
-
-void shmob_drm_backlight_dpms(struct shmob_drm_connector *scon, int mode);
-int shmob_drm_backlight_init(struct shmob_drm_connector *scon);
-void shmob_drm_backlight_exit(struct shmob_drm_connector *scon);
-
-#endif /* __SHMOB_DRM_BACKLIGHT_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
deleted file mode 100644
index 4624c0aff51ffa..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c
+++ /dev/null
@@ -1,683 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_crtc.c -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/backlight.h>
-#include <linux/clk.h>
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_backlight.h"
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/*
- * TODO: panel support
- */
-
-/* -----------------------------------------------------------------------------
- * Clock management
- */
-
-static int shmob_drm_clk_on(struct shmob_drm_device *sdev)
-{
- int ret;
-
- if (sdev->clock) {
- ret = clk_prepare_enable(sdev->clock);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static void shmob_drm_clk_off(struct shmob_drm_device *sdev)
-{
- if (sdev->clock)
- clk_disable_unprepare(sdev->clock);
-}
-
-/* -----------------------------------------------------------------------------
- * CRTC
- */
-
-static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct drm_display_mode *mode = &crtc->mode;
- u32 value;
-
- value = sdev->ldmt1r
- | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : LDMT1R_VPOL)
- | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : LDMT1R_HPOL)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWPOL) ? LDMT1R_DWPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DIPOL) ? LDMT1R_DIPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DAPOL) ? LDMT1R_DAPOL : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_HSCNT) ? LDMT1R_HSCNT : 0)
- | ((idata->flags & SHMOB_DRM_IFACE_FL_DWCNT) ? LDMT1R_DWCNT : 0);
- lcdc_write(sdev, LDMT1R, value);
-
- if (idata->interface >= SHMOB_DRM_IFACE_SYS8A &&
- idata->interface <= SHMOB_DRM_IFACE_SYS24) {
- /* Setup SYS bus. */
- value = (idata->sys.cs_setup << LDMT2R_CSUP_SHIFT)
- | (idata->sys.vsync_active_high ? LDMT2R_RSV : 0)
- | (idata->sys.vsync_dir_input ? LDMT2R_VSEL : 0)
- | (idata->sys.write_setup << LDMT2R_WCSC_SHIFT)
- | (idata->sys.write_cycle << LDMT2R_WCEC_SHIFT)
- | (idata->sys.write_strobe << LDMT2R_WCLW_SHIFT);
- lcdc_write(sdev, LDMT2R, value);
-
- value = (idata->sys.read_latch << LDMT3R_RDLC_SHIFT)
- | (idata->sys.read_setup << LDMT3R_RCSC_SHIFT)
- | (idata->sys.read_cycle << LDMT3R_RCEC_SHIFT)
- | (idata->sys.read_strobe << LDMT3R_RCLW_SHIFT);
- lcdc_write(sdev, LDMT3R, value);
- }
-
- value = ((mode->hdisplay / 8) << 16) /* HDCN */
- | (mode->htotal / 8); /* HTCN */
- lcdc_write(sdev, LDHCNR, value);
-
- value = (((mode->hsync_end - mode->hsync_start) / 8) << 16) /* HSYNW */
- | (mode->hsync_start / 8); /* HSYNP */
- lcdc_write(sdev, LDHSYNR, value);
-
- value = ((mode->hdisplay & 7) << 24) | ((mode->htotal & 7) << 16)
- | (((mode->hsync_end - mode->hsync_start) & 7) << 8)
- | (mode->hsync_start & 7);
- lcdc_write(sdev, LDHAJR, value);
-
- value = ((mode->vdisplay) << 16) /* VDLN */
- | mode->vtotal; /* VTLN */
- lcdc_write(sdev, LDVLNR, value);
-
- value = ((mode->vsync_end - mode->vsync_start) << 16) /* VSYNW */
- | mode->vsync_start; /* VSYNP */
- lcdc_write(sdev, LDVSYNR, value);
-}
-
-static void shmob_drm_crtc_start_stop(struct shmob_drm_crtc *scrtc, bool start)
-{
- struct shmob_drm_device *sdev = scrtc->crtc.dev->dev_private;
- u32 value;
-
- value = lcdc_read(sdev, LDCNT2R);
- if (start)
- lcdc_write(sdev, LDCNT2R, value | LDCNT2R_DO);
- else
- lcdc_write(sdev, LDCNT2R, value & ~LDCNT2R_DO);
-
- /* Wait until power is applied/stopped. */
- while (1) {
- value = lcdc_read(sdev, LDPMR) & LDPMR_LPS;
- if ((start && value) || (!start && !value))
- break;
-
- cpu_relax();
- }
-
- if (!start) {
- /* Stop the dot clock. */
- lcdc_write(sdev, LDDCKSTPR, LDDCKSTPR_DCKSTP);
- }
-}
-
-/*
- * shmob_drm_crtc_start - Configure and start the LCDC
- * @scrtc: the SH Mobile CRTC
- *
- * Configure and start the LCDC device. External devices (clocks, MERAM, panels,
- * ...) are not touched by this function.
- */
-static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
- const struct shmob_drm_format_info *format;
- struct drm_device *dev = sdev->ddev;
- struct drm_plane *plane;
- u32 value;
- int ret;
-
- if (scrtc->started)
- return;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (WARN_ON(format == NULL))
- return;
-
- /* Enable clocks before accessing the hardware. */
- ret = shmob_drm_clk_on(sdev);
- if (ret < 0)
- return;
-
- /* Reset and enable the LCDC. */
- lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR);
- lcdc_wait_bit(sdev, LDCNT2R, LDCNT2R_BR, 0);
- lcdc_write(sdev, LDCNT2R, LDCNT2R_ME);
-
- /* Stop the LCDC first and disable all interrupts. */
- shmob_drm_crtc_start_stop(scrtc, false);
- lcdc_write(sdev, LDINTR, 0);
-
- /* Configure power supply, dot clocks and start them. */
- lcdc_write(sdev, LDPMR, 0);
-
- value = sdev->lddckr;
- if (idata->clk_div) {
- /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider
- * denominator.
- */
- lcdc_write(sdev, LDDCKPAT1R, 0);
- lcdc_write(sdev, LDDCKPAT2R, (1 << (idata->clk_div / 2)) - 1);
-
- if (idata->clk_div == 1)
- value |= LDDCKR_MOSEL;
- else
- value |= idata->clk_div;
- }
-
- lcdc_write(sdev, LDDCKR, value);
- lcdc_write(sdev, LDDCKSTPR, 0);
- lcdc_wait_bit(sdev, LDDCKSTPR, ~0, 0);
-
- /* TODO: Setup SYS panel */
-
- /* Setup geometry, format, frame buffer memory and operation mode. */
- shmob_drm_crtc_setup_geometry(scrtc);
-
- /* TODO: Handle YUV colorspaces. Hardcode REC709 for now. */
- lcdc_write(sdev, LDDFR, format->lddfr | LDDFR_CF1);
- lcdc_write(sdev, LDMLSR, scrtc->line_size);
- lcdc_write(sdev, LDSA1R, scrtc->dma[0]);
- if (format->yuv)
- lcdc_write(sdev, LDSA2R, scrtc->dma[1]);
- lcdc_write(sdev, LDSM1R, 0);
-
- /* Word and long word swap. */
- switch (format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- value = LDDDSR_LS | LDDDSR_WS;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- value = LDDDSR_LS | LDDDSR_WS | LDDDSR_BS;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- value = LDDDSR_LS;
- break;
- }
- lcdc_write(sdev, LDDDSR, value);
-
- /* Setup planes. */
- drm_for_each_legacy_plane(plane, dev) {
- if (plane->crtc == crtc)
- shmob_drm_plane_setup(plane);
- }
-
- /* Enable the display output. */
- lcdc_write(sdev, LDCNT1R, LDCNT1R_DE);
-
- shmob_drm_crtc_start_stop(scrtc, true);
-
- scrtc->started = true;
-}
-
-static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- if (!scrtc->started)
- return;
-
- /* Stop the LCDC. */
- shmob_drm_crtc_start_stop(scrtc, false);
-
- /* Disable the display output. */
- lcdc_write(sdev, LDCNT1R, 0);
-
- /* Stop clocks. */
- shmob_drm_clk_off(sdev);
-
- scrtc->started = false;
-}
-
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc)
-{
- shmob_drm_crtc_stop(scrtc);
-}
-
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc)
-{
- if (scrtc->dpms != DRM_MODE_DPMS_ON)
- return;
-
- shmob_drm_crtc_start(scrtc);
-}
-
-static void shmob_drm_crtc_compute_base(struct shmob_drm_crtc *scrtc,
- int x, int y)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct drm_framebuffer *fb = crtc->primary->fb;
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = scrtc->format->yuv ? 8 : scrtc->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- scrtc->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (scrtc->format->yuv) {
- bpp = scrtc->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- scrtc->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void shmob_drm_crtc_update_base(struct shmob_drm_crtc *scrtc)
-{
- struct drm_crtc *crtc = &scrtc->crtc;
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_compute_base(scrtc, crtc->x, crtc->y);
-
- lcdc_write_mirror(sdev, LDSA1R, scrtc->dma[0]);
- if (scrtc->format->yuv)
- lcdc_write_mirror(sdev, LDSA2R, scrtc->dma[1]);
-
- lcdc_write(sdev, LDRCNTR, lcdc_read(sdev, LDRCNTR) ^ LDRCNTR_MRS);
-}
-
-#define to_shmob_crtc(c) container_of(c, struct shmob_drm_crtc, crtc)
-
-static void shmob_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
-
- if (scrtc->dpms == mode)
- return;
-
- if (mode == DRM_MODE_DPMS_ON)
- shmob_drm_crtc_start(scrtc);
- else
- shmob_drm_crtc_stop(scrtc);
-
- scrtc->dpms = mode;
-}
-
-static void shmob_drm_crtc_mode_prepare(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
-}
-
-static int shmob_drm_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(crtc->primary->fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "mode_set: unsupported format %08x\n",
- crtc->primary->fb->format->format);
- return -EINVAL;
- }
-
- scrtc->format = format;
- scrtc->line_size = crtc->primary->fb->pitches[0];
-
- shmob_drm_crtc_compute_base(scrtc, x, y);
-
- return 0;
-}
-
-static void shmob_drm_crtc_mode_commit(struct drm_crtc *crtc)
-{
- shmob_drm_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
-}
-
-static int shmob_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
-{
- shmob_drm_crtc_update_base(to_shmob_crtc(crtc));
-
- return 0;
-}
-
-static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
- .dpms = shmob_drm_crtc_dpms,
- .prepare = shmob_drm_crtc_mode_prepare,
- .commit = shmob_drm_crtc_mode_commit,
- .mode_set = shmob_drm_crtc_mode_set,
- .mode_set_base = shmob_drm_crtc_mode_set_base,
-};
-
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc)
-{
- struct drm_pending_vblank_event *event;
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- event = scrtc->event;
- scrtc->event = NULL;
- if (event) {
- drm_crtc_send_vblank_event(&scrtc->crtc, event);
- drm_crtc_vblank_put(&scrtc->crtc);
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-}
-
-static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_pending_vblank_event *event,
- uint32_t page_flip_flags,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc);
- struct drm_device *dev = scrtc->crtc.dev;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->event_lock, flags);
- if (scrtc->event != NULL) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- return -EBUSY;
- }
- spin_unlock_irqrestore(&dev->event_lock, flags);
-
- crtc->primary->fb = fb;
- shmob_drm_crtc_update_base(scrtc);
-
- if (event) {
- event->pipe = 0;
- drm_crtc_vblank_get(&scrtc->crtc);
- spin_lock_irqsave(&dev->event_lock, flags);
- scrtc->event = event;
- spin_unlock_irqrestore(&dev->event_lock, flags);
- }
-
- return 0;
-}
-
-static void shmob_drm_crtc_enable_vblank(struct shmob_drm_device *sdev,
- bool enable)
-{
- unsigned long flags;
- u32 ldintr;
-
- /* Be careful not to acknowledge any pending interrupt. */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- ldintr = lcdc_read(sdev, LDINTR) | LDINTR_STATUS_MASK;
- if (enable)
- ldintr |= LDINTR_VEE;
- else
- ldintr &= ~LDINTR_VEE;
- lcdc_write(sdev, LDINTR, ldintr);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-}
-
-static int shmob_drm_enable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, true);
-
- return 0;
-}
-
-static void shmob_drm_disable_vblank(struct drm_crtc *crtc)
-{
- struct shmob_drm_device *sdev = crtc->dev->dev_private;
-
- shmob_drm_crtc_enable_vblank(sdev, false);
-}
-
-static const struct drm_crtc_funcs crtc_funcs = {
- .destroy = drm_crtc_cleanup,
- .set_config = drm_crtc_helper_set_config,
- .page_flip = shmob_drm_crtc_page_flip,
- .enable_vblank = shmob_drm_enable_vblank,
- .disable_vblank = shmob_drm_disable_vblank,
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev)
-{
- struct drm_crtc *crtc = &sdev->crtc.crtc;
- int ret;
-
- sdev->crtc.dpms = DRM_MODE_DPMS_OFF;
-
- ret = drm_crtc_init(sdev->ddev, crtc, &crtc_funcs);
- if (ret < 0)
- return ret;
-
- drm_crtc_helper_add(crtc, &crtc_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Encoder
- */
-
-#define to_shmob_encoder(e) \
- container_of(e, struct shmob_drm_encoder, encoder)
-
-static void shmob_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct shmob_drm_encoder *senc = to_shmob_encoder(encoder);
- struct shmob_drm_device *sdev = encoder->dev->dev_private;
- struct shmob_drm_connector *scon = &sdev->connector;
-
- if (senc->dpms == mode)
- return;
-
- shmob_drm_backlight_dpms(scon, mode);
-
- senc->dpms = mode;
-}
-
-static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct shmob_drm_device *sdev = dev->dev_private;
- struct drm_connector *connector = &sdev->connector.connector;
- const struct drm_display_mode *panel_mode;
-
- if (list_empty(&connector->modes)) {
- dev_dbg(dev->dev, "mode_fixup: empty modes list\n");
- return false;
- }
-
- /* The flat panel mode is fixed, just copy it to the adjusted mode. */
- panel_mode = list_first_entry(&connector->modes,
- struct drm_display_mode, head);
- drm_mode_copy(adjusted_mode, panel_mode);
-
- return true;
-}
-
-static void shmob_drm_encoder_mode_prepare(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static void shmob_drm_encoder_mode_commit(struct drm_encoder *encoder)
-{
- /* No-op, everything is handled in the CRTC code. */
-}
-
-static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
- .dpms = shmob_drm_encoder_dpms,
- .mode_fixup = shmob_drm_encoder_mode_fixup,
- .prepare = shmob_drm_encoder_mode_prepare,
- .commit = shmob_drm_encoder_mode_commit,
- .mode_set = shmob_drm_encoder_mode_set,
-};
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev)
-{
- struct drm_encoder *encoder = &sdev->encoder.encoder;
- int ret;
-
- sdev->encoder.dpms = DRM_MODE_DPMS_OFF;
-
- encoder->possible_crtcs = 1;
-
- ret = drm_simple_encoder_init(sdev->ddev, encoder,
- DRM_MODE_ENCODER_LVDS);
- if (ret < 0)
- return ret;
-
- drm_encoder_helper_add(encoder, &encoder_helper_funcs);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Connector
- */
-
-#define to_shmob_connector(c) \
- container_of(c, struct shmob_drm_connector, connector)
-
-static int shmob_drm_connector_get_modes(struct drm_connector *connector)
-{
- struct shmob_drm_device *sdev = connector->dev->dev_private;
- struct drm_display_mode *mode;
-
- mode = drm_mode_create(connector->dev);
- if (mode == NULL)
- return 0;
-
- mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
- mode->clock = sdev->pdata->panel.mode.clock;
- mode->hdisplay = sdev->pdata->panel.mode.hdisplay;
- mode->hsync_start = sdev->pdata->panel.mode.hsync_start;
- mode->hsync_end = sdev->pdata->panel.mode.hsync_end;
- mode->htotal = sdev->pdata->panel.mode.htotal;
- mode->vdisplay = sdev->pdata->panel.mode.vdisplay;
- mode->vsync_start = sdev->pdata->panel.mode.vsync_start;
- mode->vsync_end = sdev->pdata->panel.mode.vsync_end;
- mode->vtotal = sdev->pdata->panel.mode.vtotal;
- mode->flags = sdev->pdata->panel.mode.flags;
-
- drm_mode_set_name(mode);
- drm_mode_probed_add(connector, mode);
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- return 1;
-}
-
-static struct drm_encoder *
-shmob_drm_connector_best_encoder(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- return scon->encoder;
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
- .get_modes = shmob_drm_connector_get_modes,
- .best_encoder = shmob_drm_connector_best_encoder,
-};
-
-static void shmob_drm_connector_destroy(struct drm_connector *connector)
-{
- struct shmob_drm_connector *scon = to_shmob_connector(connector);
-
- shmob_drm_backlight_exit(scon);
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
- .dpms = drm_helper_connector_dpms,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = shmob_drm_connector_destroy,
-};
-
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder)
-{
- struct drm_connector *connector = &sdev->connector.connector;
- int ret;
-
- sdev->connector.encoder = encoder;
-
- connector->display_info.width_mm = sdev->pdata->panel.width_mm;
- connector->display_info.height_mm = sdev->pdata->panel.height_mm;
-
- ret = drm_connector_init(sdev->ddev, connector, &connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
- if (ret < 0)
- return ret;
-
- drm_connector_helper_add(connector, &connector_helper_funcs);
-
- ret = shmob_drm_backlight_init(&sdev->connector);
- if (ret < 0)
- goto err_cleanup;
-
- ret = drm_connector_attach_encoder(connector, encoder);
- if (ret < 0)
- goto err_backlight;
-
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
- drm_object_property_set_value(&connector->base,
- sdev->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
-
- return 0;
-
-err_backlight:
- shmob_drm_backlight_exit(&sdev->connector);
-err_cleanup:
- drm_connector_cleanup(connector);
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h b/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
deleted file mode 100644
index 21718843f46d3d..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_crtc.h -- SH Mobile DRM CRTCs
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_CRTC_H__
-#define __SHMOB_DRM_CRTC_H__
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_connector.h>
-#include <drm/drm_encoder.h>
-
-struct backlight_device;
-struct drm_pending_vblank_event;
-struct shmob_drm_device;
-struct shmob_drm_format_info;
-
-struct shmob_drm_crtc {
- struct drm_crtc crtc;
-
- struct drm_pending_vblank_event *event;
- int dpms;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
- unsigned int line_size;
- bool started;
-};
-
-struct shmob_drm_encoder {
- struct drm_encoder encoder;
- int dpms;
-};
-
-struct shmob_drm_connector {
- struct drm_connector connector;
- struct drm_encoder *encoder;
-
- struct backlight_device *backlight;
-};
-
-int shmob_drm_crtc_create(struct shmob_drm_device *sdev);
-void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_suspend(struct shmob_drm_crtc *scrtc);
-void shmob_drm_crtc_resume(struct shmob_drm_crtc *scrtc);
-
-int shmob_drm_encoder_create(struct shmob_drm_device *sdev);
-int shmob_drm_connector_create(struct shmob_drm_device *sdev,
- struct drm_encoder *encoder);
-
-#endif /* __SHMOB_DRM_CRTC_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
deleted file mode 100644
index 3d511fa3891364..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_drv.c -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_drv.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_module.h>
-#include <drm/drm_probe_helper.h>
-#include <drm/drm_vblank.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Hardware initialization
- */
-
-static int shmob_drm_init_interface(struct shmob_drm_device *sdev)
-{
- static const u32 ldmt1r[] = {
- [SHMOB_DRM_IFACE_RGB8] = LDMT1R_MIFTYP_RGB8,
- [SHMOB_DRM_IFACE_RGB9] = LDMT1R_MIFTYP_RGB9,
- [SHMOB_DRM_IFACE_RGB12A] = LDMT1R_MIFTYP_RGB12A,
- [SHMOB_DRM_IFACE_RGB12B] = LDMT1R_MIFTYP_RGB12B,
- [SHMOB_DRM_IFACE_RGB16] = LDMT1R_MIFTYP_RGB16,
- [SHMOB_DRM_IFACE_RGB18] = LDMT1R_MIFTYP_RGB18,
- [SHMOB_DRM_IFACE_RGB24] = LDMT1R_MIFTYP_RGB24,
- [SHMOB_DRM_IFACE_YUV422] = LDMT1R_MIFTYP_YCBCR,
- [SHMOB_DRM_IFACE_SYS8A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A,
- [SHMOB_DRM_IFACE_SYS8B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B,
- [SHMOB_DRM_IFACE_SYS8C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C,
- [SHMOB_DRM_IFACE_SYS8D] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D,
- [SHMOB_DRM_IFACE_SYS9] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS9,
- [SHMOB_DRM_IFACE_SYS12] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS12,
- [SHMOB_DRM_IFACE_SYS16A] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A,
- [SHMOB_DRM_IFACE_SYS16B] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B,
- [SHMOB_DRM_IFACE_SYS16C] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C,
- [SHMOB_DRM_IFACE_SYS18] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS18,
- [SHMOB_DRM_IFACE_SYS24] = LDMT1R_IFM | LDMT1R_MIFTYP_SYS24,
- };
-
- if (sdev->pdata->iface.interface >= ARRAY_SIZE(ldmt1r)) {
- dev_err(sdev->dev, "invalid interface type %u\n",
- sdev->pdata->iface.interface);
- return -EINVAL;
- }
-
- sdev->ldmt1r = ldmt1r[sdev->pdata->iface.interface];
- return 0;
-}
-
-static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev,
- enum shmob_drm_clk_source clksrc)
-{
- struct clk *clk;
- char *clkname;
-
- switch (clksrc) {
- case SHMOB_DRM_CLK_BUS:
- clkname = "bus_clk";
- sdev->lddckr = LDDCKR_ICKSEL_BUS;
- break;
- case SHMOB_DRM_CLK_PERIPHERAL:
- clkname = "peripheral_clk";
- sdev->lddckr = LDDCKR_ICKSEL_MIPI;
- break;
- case SHMOB_DRM_CLK_EXTERNAL:
- clkname = NULL;
- sdev->lddckr = LDDCKR_ICKSEL_HDMI;
- break;
- default:
- return -EINVAL;
- }
-
- clk = devm_clk_get(sdev->dev, clkname);
- if (IS_ERR(clk)) {
- dev_err(sdev->dev, "cannot get dot clock %s\n", clkname);
- return PTR_ERR(clk);
- }
-
- sdev->clock = clk;
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * DRM operations
- */
-
-static irqreturn_t shmob_drm_irq(int irq, void *arg)
-{
- struct drm_device *dev = arg;
- struct shmob_drm_device *sdev = dev->dev_private;
- unsigned long flags;
- u32 status;
-
- /* Acknowledge interrupts. Putting interrupt enable and interrupt flag
- * bits in the same register is really brain-dead design and requires
- * taking a spinlock.
- */
- spin_lock_irqsave(&sdev->irq_lock, flags);
- status = lcdc_read(sdev, LDINTR);
- lcdc_write(sdev, LDINTR, status ^ LDINTR_STATUS_MASK);
- spin_unlock_irqrestore(&sdev->irq_lock, flags);
-
- if (status & LDINTR_VES) {
- drm_handle_vblank(dev, 0);
- shmob_drm_crtc_finish_page_flip(&sdev->crtc);
- }
-
- return IRQ_HANDLED;
-}
-
-DEFINE_DRM_GEM_DMA_FOPS(shmob_drm_fops);
-
-static const struct drm_driver shmob_drm_driver = {
- .driver_features = DRIVER_GEM | DRIVER_MODESET,
- DRM_GEM_DMA_DRIVER_OPS,
- .fops = &shmob_drm_fops,
- .name = "shmob-drm",
- .desc = "Renesas SH Mobile DRM",
- .date = "20120424",
- .major = 1,
- .minor = 0,
-};
-
-/* -----------------------------------------------------------------------------
- * Power management
- */
-
-#ifdef CONFIG_PM_SLEEP
-static int shmob_drm_pm_suspend(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_kms_helper_poll_disable(sdev->ddev);
- shmob_drm_crtc_suspend(&sdev->crtc);
-
- return 0;
-}
-
-static int shmob_drm_pm_resume(struct device *dev)
-{
- struct shmob_drm_device *sdev = dev_get_drvdata(dev);
-
- drm_modeset_lock_all(sdev->ddev);
- shmob_drm_crtc_resume(&sdev->crtc);
- drm_modeset_unlock_all(sdev->ddev);
-
- drm_kms_helper_poll_enable(sdev->ddev);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops shmob_drm_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(shmob_drm_pm_suspend, shmob_drm_pm_resume)
-};
-
-/* -----------------------------------------------------------------------------
- * Platform driver
- */
-
-static int shmob_drm_remove(struct platform_device *pdev)
-{
- struct shmob_drm_device *sdev = platform_get_drvdata(pdev);
- struct drm_device *ddev = sdev->ddev;
-
- drm_dev_unregister(ddev);
- drm_kms_helper_poll_fini(ddev);
- free_irq(sdev->irq, ddev);
- drm_dev_put(ddev);
-
- return 0;
-}
-
-static int shmob_drm_probe(struct platform_device *pdev)
-{
- struct shmob_drm_platform_data *pdata = pdev->dev.platform_data;
- struct shmob_drm_device *sdev;
- struct drm_device *ddev;
- unsigned int i;
- int ret;
-
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
- }
-
- /*
- * Allocate and initialize the driver private data, I/O resources and
- * clocks.
- */
- sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL);
- if (sdev == NULL)
- return -ENOMEM;
-
- sdev->dev = &pdev->dev;
- sdev->pdata = pdata;
- spin_lock_init(&sdev->irq_lock);
-
- platform_set_drvdata(pdev, sdev);
-
- sdev->mmio = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(sdev->mmio))
- return PTR_ERR(sdev->mmio);
-
- ret = shmob_drm_setup_clocks(sdev, pdata->clk_source);
- if (ret < 0)
- return ret;
-
- ret = shmob_drm_init_interface(sdev);
- if (ret < 0)
- return ret;
-
- /* Allocate and initialize the DRM device. */
- ddev = drm_dev_alloc(&shmob_drm_driver, &pdev->dev);
- if (IS_ERR(ddev))
- return PTR_ERR(ddev);
-
- sdev->ddev = ddev;
- ddev->dev_private = sdev;
-
- ret = shmob_drm_modeset_init(sdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize mode setting\n");
- goto err_free_drm_dev;
- }
-
- for (i = 0; i < 4; ++i) {
- ret = shmob_drm_plane_create(sdev, i);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to create plane %u\n", i);
- goto err_modeset_cleanup;
- }
- }
-
- ret = drm_vblank_init(ddev, 1);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to initialize vblank\n");
- goto err_modeset_cleanup;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto err_modeset_cleanup;
- sdev->irq = ret;
-
- ret = request_irq(sdev->irq, shmob_drm_irq, 0, ddev->driver->name,
- ddev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to install IRQ handler\n");
- goto err_modeset_cleanup;
- }
-
- /*
- * Register the DRM device with the core and the connectors with
- * sysfs.
- */
- ret = drm_dev_register(ddev, 0);
- if (ret < 0)
- goto err_irq_uninstall;
-
- return 0;
-
-err_irq_uninstall:
- free_irq(sdev->irq, ddev);
-err_modeset_cleanup:
- drm_kms_helper_poll_fini(ddev);
-err_free_drm_dev:
- drm_dev_put(ddev);
-
- return ret;
-}
-
-static struct platform_driver shmob_drm_platform_driver = {
- .probe = shmob_drm_probe,
- .remove = shmob_drm_remove,
- .driver = {
- .name = "shmob-drm",
- .pm = &shmob_drm_pm_ops,
- },
-};
-
-drm_module_platform_driver(shmob_drm_platform_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_DESCRIPTION("Renesas SH Mobile DRM Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.h b/drivers/gpu/drm/shmobile/shmob_drm_drv.h
deleted file mode 100644
index 4964ddd5ab7472..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm.h -- SH Mobile DRM driver
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_DRV_H__
-#define __SHMOB_DRM_DRV_H__
-
-#include <linux/kernel.h>
-#include <linux/platform_data/shmob_drm.h>
-#include <linux/spinlock.h>
-
-#include "shmob_drm_crtc.h"
-
-struct clk;
-struct device;
-struct drm_device;
-
-struct shmob_drm_device {
- struct device *dev;
- const struct shmob_drm_platform_data *pdata;
-
- void __iomem *mmio;
- struct clk *clock;
- u32 lddckr;
- u32 ldmt1r;
-
- unsigned int irq;
- spinlock_t irq_lock; /* Protects hardware LDINTR register */
-
- struct drm_device *ddev;
-
- struct shmob_drm_crtc crtc;
- struct shmob_drm_encoder encoder;
- struct shmob_drm_connector connector;
-};
-
-#endif /* __SHMOB_DRM_DRV_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/shmobile/shmob_drm_kms.c
deleted file mode 100644
index 60a2c8d8a0d947..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_kms.c -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_gem_dma_helper.h>
-#include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_probe_helper.h>
-
-#include "shmob_drm_crtc.h"
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_regs.h"
-
-/* -----------------------------------------------------------------------------
- * Format helpers
- */
-
-static const struct shmob_drm_format_info shmob_drm_format_infos[] = {
- {
- .fourcc = DRM_FORMAT_RGB565,
- .bpp = 16,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB16,
- }, {
- .fourcc = DRM_FORMAT_RGB888,
- .bpp = 24,
- .yuv = false,
- .lddfr = LDDFR_PKF_RGB24,
- }, {
- .fourcc = DRM_FORMAT_ARGB8888,
- .bpp = 32,
- .yuv = false,
- .lddfr = LDDFR_PKF_ARGB32,
- }, {
- .fourcc = DRM_FORMAT_NV12,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV21,
- .bpp = 12,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_420,
- }, {
- .fourcc = DRM_FORMAT_NV16,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV61,
- .bpp = 16,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_422,
- }, {
- .fourcc = DRM_FORMAT_NV24,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- }, {
- .fourcc = DRM_FORMAT_NV42,
- .bpp = 24,
- .yuv = true,
- .lddfr = LDDFR_CC | LDDFR_YF_444,
- },
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(shmob_drm_format_infos); ++i) {
- if (shmob_drm_format_infos[i].fourcc == fourcc)
- return &shmob_drm_format_infos[i];
- }
-
- return NULL;
-}
-
-/* -----------------------------------------------------------------------------
- * Frame buffer
- */
-
-static struct drm_framebuffer *
-shmob_drm_fb_create(struct drm_device *dev, struct drm_file *file_priv,
- const struct drm_mode_fb_cmd2 *mode_cmd)
-{
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(mode_cmd->pixel_format);
- if (format == NULL) {
- dev_dbg(dev->dev, "unsupported pixel format %08x\n",
- mode_cmd->pixel_format);
- return ERR_PTR(-EINVAL);
- }
-
- if (mode_cmd->pitches[0] & 7 || mode_cmd->pitches[0] >= 65536) {
- dev_dbg(dev->dev, "invalid pitch value %u\n",
- mode_cmd->pitches[0]);
- return ERR_PTR(-EINVAL);
- }
-
- if (format->yuv) {
- unsigned int chroma_cpp = format->bpp == 24 ? 2 : 1;
-
- if (mode_cmd->pitches[1] != mode_cmd->pitches[0] * chroma_cpp) {
- dev_dbg(dev->dev,
- "luma and chroma pitches do not match\n");
- return ERR_PTR(-EINVAL);
- }
- }
-
- return drm_gem_fb_create(dev, file_priv, mode_cmd);
-}
-
-static const struct drm_mode_config_funcs shmob_drm_mode_config_funcs = {
- .fb_create = shmob_drm_fb_create,
-};
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev)
-{
- int ret;
-
- ret = drmm_mode_config_init(sdev->ddev);
- if (ret)
- return ret;
-
- shmob_drm_crtc_create(sdev);
- shmob_drm_encoder_create(sdev);
- shmob_drm_connector_create(sdev, &sdev->encoder.encoder);
-
- drm_kms_helper_poll_init(sdev->ddev);
-
- sdev->ddev->mode_config.min_width = 0;
- sdev->ddev->mode_config.min_height = 0;
- sdev->ddev->mode_config.max_width = 4095;
- sdev->ddev->mode_config.max_height = 4095;
- sdev->ddev->mode_config.funcs = &shmob_drm_mode_config_funcs;
-
- drm_helper_disable_unused_functions(sdev->ddev);
-
- return 0;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.h b/drivers/gpu/drm/shmobile/shmob_drm_kms.h
deleted file mode 100644
index 0347b1fd2338a8..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_kms.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_kms.h -- SH Mobile DRM Mode Setting
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_KMS_H__
-#define __SHMOB_DRM_KMS_H__
-
-#include <linux/types.h>
-
-struct drm_gem_dma_object;
-struct shmob_drm_device;
-
-struct shmob_drm_format_info {
- u32 fourcc;
- unsigned int bpp;
- bool yuv;
- u32 lddfr;
-};
-
-const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc);
-
-int shmob_drm_modeset_init(struct shmob_drm_device *sdev);
-
-#endif /* __SHMOB_DRM_KMS_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.c b/drivers/gpu/drm/shmobile/shmob_drm_plane.c
deleted file mode 100644
index 6c5f0cbe7d95b9..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * shmob_drm_plane.c -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_dma_helper.h>
-#include <drm/drm_fourcc.h>
-#include <drm/drm_framebuffer.h>
-#include <drm/drm_gem_dma_helper.h>
-
-#include "shmob_drm_drv.h"
-#include "shmob_drm_kms.h"
-#include "shmob_drm_plane.h"
-#include "shmob_drm_regs.h"
-
-struct shmob_drm_plane {
- struct drm_plane plane;
- unsigned int index;
- unsigned int alpha;
-
- const struct shmob_drm_format_info *format;
- unsigned long dma[2];
-
- unsigned int src_x;
- unsigned int src_y;
- unsigned int crtc_x;
- unsigned int crtc_y;
- unsigned int crtc_w;
- unsigned int crtc_h;
-};
-
-#define to_shmob_plane(p) container_of(p, struct shmob_drm_plane, plane)
-
-static void shmob_drm_plane_compute_base(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb,
- int x, int y)
-{
- struct drm_gem_dma_object *gem;
- unsigned int bpp;
-
- bpp = splane->format->yuv ? 8 : splane->format->bpp;
- gem = drm_fb_dma_get_gem_obj(fb, 0);
- splane->dma[0] = gem->dma_addr + fb->offsets[0]
- + y * fb->pitches[0] + x * bpp / 8;
-
- if (splane->format->yuv) {
- bpp = splane->format->bpp - 8;
- gem = drm_fb_dma_get_gem_obj(fb, 1);
- splane->dma[1] = gem->dma_addr + fb->offsets[1]
- + y / (bpp == 4 ? 2 : 1) * fb->pitches[1]
- + x * (bpp == 16 ? 2 : 1);
- }
-}
-
-static void __shmob_drm_plane_setup(struct shmob_drm_plane *splane,
- struct drm_framebuffer *fb)
-{
- struct shmob_drm_device *sdev = splane->plane.dev->dev_private;
- u32 format;
-
- /* TODO: Support ROP3 mode */
- format = LDBBSIFR_EN | (splane->alpha << LDBBSIFR_LAY_SHIFT);
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- case DRM_FORMAT_NV21:
- case DRM_FORMAT_NV61:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW;
- break;
- case DRM_FORMAT_RGB888:
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV24:
- format |= LDBBSIFR_SWPL | LDBBSIFR_SWPW | LDBBSIFR_SWPB;
- break;
- case DRM_FORMAT_ARGB8888:
- default:
- format |= LDBBSIFR_SWPL;
- break;
- }
-
- switch (splane->format->fourcc) {
- case DRM_FORMAT_RGB565:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB16;
- break;
- case DRM_FORMAT_RGB888:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_RY | LDBBSIFR_RPKF_RGB24;
- break;
- case DRM_FORMAT_ARGB8888:
- format |= LDBBSIFR_AL_PK | LDBBSIFR_RY | LDDFR_PKF_ARGB32;
- break;
- case DRM_FORMAT_NV12:
- case DRM_FORMAT_NV21:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_420;
- break;
- case DRM_FORMAT_NV16:
- case DRM_FORMAT_NV61:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_422;
- break;
- case DRM_FORMAT_NV24:
- case DRM_FORMAT_NV42:
- format |= LDBBSIFR_AL_1 | LDBBSIFR_CHRR_444;
- break;
- }
-
-#define plane_reg_dump(sdev, splane, reg) \
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x 0x%08x\n", __func__, \
- splane->index, #reg, \
- lcdc_read(sdev, reg(splane->index)), \
- lcdc_read(sdev, reg(splane->index) + LCDC_SIDE_B_OFFSET))
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-
- lcdc_write(sdev, LDBCR, LDBCR_UPC(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), format);
-
- lcdc_write(sdev, LDBnBSSZR(splane->index),
- (splane->crtc_h << LDBBSSZR_BVSS_SHIFT) |
- (splane->crtc_w << LDBBSSZR_BHSS_SHIFT));
- lcdc_write(sdev, LDBnBLOCR(splane->index),
- (splane->crtc_y << LDBBLOCR_CVLC_SHIFT) |
- (splane->crtc_x << LDBBLOCR_CHLC_SHIFT));
- lcdc_write(sdev, LDBnBSMWR(splane->index),
- fb->pitches[0] << LDBBSMWR_BSMW_SHIFT);
-
- shmob_drm_plane_compute_base(splane, fb, splane->src_x, splane->src_y);
-
- lcdc_write(sdev, LDBnBSAYR(splane->index), splane->dma[0]);
- if (splane->format->yuv)
- lcdc_write(sdev, LDBnBSACR(splane->index), splane->dma[1]);
-
- lcdc_write(sdev, LDBCR,
- LDBCR_UPF(splane->index) | LDBCR_UPD(splane->index));
- dev_dbg(sdev->ddev->dev, "%s(%u): %s 0x%08x\n", __func__, splane->index,
- "LDBCR", lcdc_read(sdev, LDBCR));
-
- plane_reg_dump(sdev, splane, LDBnBSIFR);
- plane_reg_dump(sdev, splane, LDBnBSSZR);
- plane_reg_dump(sdev, splane, LDBnBLOCR);
- plane_reg_dump(sdev, splane, LDBnBSMWR);
- plane_reg_dump(sdev, splane, LDBnBSAYR);
- plane_reg_dump(sdev, splane, LDBnBSACR);
-}
-
-void shmob_drm_plane_setup(struct drm_plane *plane)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
-
- if (plane->fb == NULL)
- return;
-
- __shmob_drm_plane_setup(splane, plane->fb);
-}
-
-static int
-shmob_drm_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
- const struct shmob_drm_format_info *format;
-
- format = shmob_drm_format_info(fb->format->format);
- if (format == NULL) {
- dev_dbg(sdev->dev, "update_plane: unsupported format %08x\n",
- fb->format->format);
- return -EINVAL;
- }
-
- if (src_w >> 16 != crtc_w || src_h >> 16 != crtc_h) {
- dev_dbg(sdev->dev, "%s: scaling not supported\n", __func__);
- return -EINVAL;
- }
-
- splane->format = format;
-
- splane->src_x = src_x >> 16;
- splane->src_y = src_y >> 16;
- splane->crtc_x = crtc_x;
- splane->crtc_y = crtc_y;
- splane->crtc_w = crtc_w;
- splane->crtc_h = crtc_h;
-
- __shmob_drm_plane_setup(splane, fb);
- return 0;
-}
-
-static int shmob_drm_plane_disable(struct drm_plane *plane,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct shmob_drm_plane *splane = to_shmob_plane(plane);
- struct shmob_drm_device *sdev = plane->dev->dev_private;
-
- splane->format = NULL;
-
- lcdc_write(sdev, LDBnBSIFR(splane->index), 0);
- return 0;
-}
-
-static void shmob_drm_plane_destroy(struct drm_plane *plane)
-{
- drm_plane_force_disable(plane);
- drm_plane_cleanup(plane);
-}
-
-static const struct drm_plane_funcs shmob_drm_plane_funcs = {
- .update_plane = shmob_drm_plane_update,
- .disable_plane = shmob_drm_plane_disable,
- .destroy = shmob_drm_plane_destroy,
-};
-
-static const uint32_t formats[] = {
- DRM_FORMAT_RGB565,
- DRM_FORMAT_RGB888,
- DRM_FORMAT_ARGB8888,
- DRM_FORMAT_NV12,
- DRM_FORMAT_NV21,
- DRM_FORMAT_NV16,
- DRM_FORMAT_NV61,
- DRM_FORMAT_NV24,
- DRM_FORMAT_NV42,
-};
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index)
-{
- struct shmob_drm_plane *splane;
- int ret;
-
- splane = devm_kzalloc(sdev->dev, sizeof(*splane), GFP_KERNEL);
- if (splane == NULL)
- return -ENOMEM;
-
- splane->index = index;
- splane->alpha = 255;
-
- ret = drm_universal_plane_init(sdev->ddev, &splane->plane, 1,
- &shmob_drm_plane_funcs,
- formats, ARRAY_SIZE(formats), NULL,
- DRM_PLANE_TYPE_OVERLAY, NULL);
-
- return ret;
-}
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.h b/drivers/gpu/drm/shmobile/shmob_drm_plane.h
deleted file mode 100644
index e72b21a4288fc2..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_plane.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_plane.h -- SH Mobile DRM Planes
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_PLANE_H__
-#define __SHMOB_DRM_PLANE_H__
-
-struct drm_plane;
-struct shmob_drm_device;
-
-int shmob_drm_plane_create(struct shmob_drm_device *sdev, unsigned int index);
-void shmob_drm_plane_setup(struct drm_plane *plane);
-
-#endif /* __SHMOB_DRM_PLANE_H__ */
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_regs.h b/drivers/gpu/drm/shmobile/shmob_drm_regs.h
deleted file mode 100644
index 058533685c4cd0..00000000000000
--- a/drivers/gpu/drm/shmobile/shmob_drm_regs.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * shmob_drm_regs.h -- SH Mobile DRM registers
- *
- * Copyright (C) 2012 Renesas Electronics Corporation
- *
- * Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- */
-
-#ifndef __SHMOB_DRM_REGS_H__
-#define __SHMOB_DRM_REGS_H__
-
-#include <linux/io.h>
-#include <linux/jiffies.h>
-
-#include "shmob_drm_drv.h"
-
-/* Register definitions */
-#define LDDCKPAT1R 0x400
-#define LDDCKPAT2R 0x404
-#define LDDCKR 0x410
-#define LDDCKR_ICKSEL_BUS (0 << 16)
-#define LDDCKR_ICKSEL_MIPI (1 << 16)
-#define LDDCKR_ICKSEL_HDMI (2 << 16)
-#define LDDCKR_ICKSEL_EXT (3 << 16)
-#define LDDCKR_ICKSEL_MASK (7 << 16)
-#define LDDCKR_MOSEL (1 << 6)
-#define LDDCKSTPR 0x414
-#define LDDCKSTPR_DCKSTS (1 << 16)
-#define LDDCKSTPR_DCKSTP (1 << 0)
-#define LDMT1R 0x418
-#define LDMT1R_VPOL (1 << 28)
-#define LDMT1R_HPOL (1 << 27)
-#define LDMT1R_DWPOL (1 << 26)
-#define LDMT1R_DIPOL (1 << 25)
-#define LDMT1R_DAPOL (1 << 24)
-#define LDMT1R_HSCNT (1 << 17)
-#define LDMT1R_DWCNT (1 << 16)
-#define LDMT1R_IFM (1 << 12)
-#define LDMT1R_MIFTYP_RGB8 (0x0 << 0)
-#define LDMT1R_MIFTYP_RGB9 (0x4 << 0)
-#define LDMT1R_MIFTYP_RGB12A (0x5 << 0)
-#define LDMT1R_MIFTYP_RGB12B (0x6 << 0)
-#define LDMT1R_MIFTYP_RGB16 (0x7 << 0)
-#define LDMT1R_MIFTYP_RGB18 (0xa << 0)
-#define LDMT1R_MIFTYP_RGB24 (0xb << 0)
-#define LDMT1R_MIFTYP_YCBCR (0xf << 0)
-#define LDMT1R_MIFTYP_SYS8A (0x0 << 0)
-#define LDMT1R_MIFTYP_SYS8B (0x1 << 0)
-#define LDMT1R_MIFTYP_SYS8C (0x2 << 0)
-#define LDMT1R_MIFTYP_SYS8D (0x3 << 0)
-#define LDMT1R_MIFTYP_SYS9 (0x4 << 0)
-#define LDMT1R_MIFTYP_SYS12 (0x5 << 0)
-#define LDMT1R_MIFTYP_SYS16A (0x7 << 0)
-#define LDMT1R_MIFTYP_SYS16B (0x8 << 0)
-#define LDMT1R_MIFTYP_SYS16C (0x9 << 0)
-#define LDMT1R_MIFTYP_SYS18 (0xa << 0)
-#define LDMT1R_MIFTYP_SYS24 (0xb << 0)
-#define LDMT1R_MIFTYP_MASK (0xf << 0)
-#define LDMT2R 0x41c
-#define LDMT2R_CSUP_MASK (7 << 26)
-#define LDMT2R_CSUP_SHIFT 26
-#define LDMT2R_RSV (1 << 25)
-#define LDMT2R_VSEL (1 << 24)
-#define LDMT2R_WCSC_MASK (0xff << 16)
-#define LDMT2R_WCSC_SHIFT 16
-#define LDMT2R_WCEC_MASK (0xff << 8)
-#define LDMT2R_WCEC_SHIFT 8
-#define LDMT2R_WCLW_MASK (0xff << 0)
-#define LDMT2R_WCLW_SHIFT 0
-#define LDMT3R 0x420
-#define LDMT3R_RDLC_MASK (0x3f << 24)
-#define LDMT3R_RDLC_SHIFT 24
-#define LDMT3R_RCSC_MASK (0xff << 16)
-#define LDMT3R_RCSC_SHIFT 16
-#define LDMT3R_RCEC_MASK (0xff << 8)
-#define LDMT3R_RCEC_SHIFT 8
-#define LDMT3R_RCLW_MASK (0xff << 0)
-#define LDMT3R_RCLW_SHIFT 0
-#define LDDFR 0x424
-#define LDDFR_CF1 (1 << 18)
-#define LDDFR_CF0 (1 << 17)
-#define LDDFR_CC (1 << 16)
-#define LDDFR_YF_420 (0 << 8)
-#define LDDFR_YF_422 (1 << 8)
-#define LDDFR_YF_444 (2 << 8)
-#define LDDFR_YF_MASK (3 << 8)
-#define LDDFR_PKF_ARGB32 (0x00 << 0)
-#define LDDFR_PKF_RGB16 (0x03 << 0)
-#define LDDFR_PKF_RGB24 (0x0b << 0)
-#define LDDFR_PKF_MASK (0x1f << 0)
-#define LDSM1R 0x428
-#define LDSM1R_OS (1 << 0)
-#define LDSM2R 0x42c
-#define LDSM2R_OSTRG (1 << 0)
-#define LDSA1R 0x430
-#define LDSA2R 0x434
-#define LDMLSR 0x438
-#define LDWBFR 0x43c
-#define LDWBCNTR 0x440
-#define LDWBAR 0x444
-#define LDHCNR 0x448
-#define LDHSYNR 0x44c
-#define LDVLNR 0x450
-#define LDVSYNR 0x454
-#define LDHPDR 0x458
-#define LDVPDR 0x45c
-#define LDPMR 0x460
-#define LDPMR_LPS (3 << 0)
-#define LDINTR 0x468
-#define LDINTR_FE (1 << 10)
-#define LDINTR_VSE (1 << 9)
-#define LDINTR_VEE (1 << 8)
-#define LDINTR_FS (1 << 2)
-#define LDINTR_VSS (1 << 1)
-#define LDINTR_VES (1 << 0)
-#define LDINTR_STATUS_MASK (0xff << 0)
-#define LDSR 0x46c
-#define LDSR_MSS (1 << 10)
-#define LDSR_MRS (1 << 8)
-#define LDSR_AS (1 << 1)
-#define LDCNT1R 0x470
-#define LDCNT1R_DE (1 << 0)
-#define LDCNT2R 0x474
-#define LDCNT2R_BR (1 << 8)
-#define LDCNT2R_MD (1 << 3)
-#define LDCNT2R_SE (1 << 2)
-#define LDCNT2R_ME (1 << 1)
-#define LDCNT2R_DO (1 << 0)
-#define LDRCNTR 0x478
-#define LDRCNTR_SRS (1 << 17)
-#define LDRCNTR_SRC (1 << 16)
-#define LDRCNTR_MRS (1 << 1)
-#define LDRCNTR_MRC (1 << 0)
-#define LDDDSR 0x47c
-#define LDDDSR_LS (1 << 2)
-#define LDDDSR_WS (1 << 1)
-#define LDDDSR_BS (1 << 0)
-#define LDHAJR 0x4a0
-
-#define LDDWD0R 0x800
-#define LDDWDxR_WDACT (1 << 28)
-#define LDDWDxR_RSW (1 << 24)
-#define LDDRDR 0x840
-#define LDDRDR_RSR (1 << 24)
-#define LDDRDR_DRD_MASK (0x3ffff << 0)
-#define LDDWAR 0x900
-#define LDDWAR_WA (1 << 0)
-#define LDDRAR 0x904
-#define LDDRAR_RA (1 << 0)
-
-#define LDBCR 0xb00
-#define LDBCR_UPC(n) (1 << ((n) + 16))
-#define LDBCR_UPF(n) (1 << ((n) + 8))
-#define LDBCR_UPD(n) (1 << ((n) + 0))
-#define LDBnBSIFR(n) (0xb20 + (n) * 0x20 + 0x00)
-#define LDBBSIFR_EN (1 << 31)
-#define LDBBSIFR_VS (1 << 29)
-#define LDBBSIFR_BRSEL (1 << 28)
-#define LDBBSIFR_MX (1 << 27)
-#define LDBBSIFR_MY (1 << 26)
-#define LDBBSIFR_CV3 (3 << 24)
-#define LDBBSIFR_CV2 (2 << 24)
-#define LDBBSIFR_CV1 (1 << 24)
-#define LDBBSIFR_CV0 (0 << 24)
-#define LDBBSIFR_CV_MASK (3 << 24)
-#define LDBBSIFR_LAY_MASK (0xff << 16)
-#define LDBBSIFR_LAY_SHIFT 16
-#define LDBBSIFR_ROP3_MASK (0xff << 16)
-#define LDBBSIFR_ROP3_SHIFT 16
-#define LDBBSIFR_AL_PL8 (3 << 14)
-#define LDBBSIFR_AL_PL1 (2 << 14)
-#define LDBBSIFR_AL_PK (1 << 14)
-#define LDBBSIFR_AL_1 (0 << 14)
-#define LDBBSIFR_AL_MASK (3 << 14)
-#define LDBBSIFR_SWPL (1 << 10)
-#define LDBBSIFR_SWPW (1 << 9)
-#define LDBBSIFR_SWPB (1 << 8)
-#define LDBBSIFR_RY (1 << 7)
-#define LDBBSIFR_CHRR_420 (2 << 0)
-#define LDBBSIFR_CHRR_422 (1 << 0)
-#define LDBBSIFR_CHRR_444 (0 << 0)
-#define LDBBSIFR_RPKF_ARGB32 (0x00 << 0)
-#define LDBBSIFR_RPKF_RGB16 (0x03 << 0)
-#define LDBBSIFR_RPKF_RGB24 (0x0b << 0)
-#define LDBBSIFR_RPKF_MASK (0x1f << 0)
-#define LDBnBSSZR(n) (0xb20 + (n) * 0x20 + 0x04)
-#define LDBBSSZR_BVSS_MASK (0xfff << 16)
-#define LDBBSSZR_BVSS_SHIFT 16
-#define LDBBSSZR_BHSS_MASK (0xfff << 0)
-#define LDBBSSZR_BHSS_SHIFT 0
-#define LDBnBLOCR(n) (0xb20 + (n) * 0x20 + 0x08)
-#define LDBBLOCR_CVLC_MASK (0xfff << 16)
-#define LDBBLOCR_CVLC_SHIFT 16
-#define LDBBLOCR_CHLC_MASK (0xfff << 0)
-#define LDBBLOCR_CHLC_SHIFT 0
-#define LDBnBSMWR(n) (0xb20 + (n) * 0x20 + 0x0c)
-#define LDBBSMWR_BSMWA_MASK (0xffff << 16)
-#define LDBBSMWR_BSMWA_SHIFT 16
-#define LDBBSMWR_BSMW_MASK (0xffff << 0)
-#define LDBBSMWR_BSMW_SHIFT 0
-#define LDBnBSAYR(n) (0xb20 + (n) * 0x20 + 0x10)
-#define LDBBSAYR_FG1A_MASK (0xff << 24)
-#define LDBBSAYR_FG1A_SHIFT 24
-#define LDBBSAYR_FG1R_MASK (0xff << 16)
-#define LDBBSAYR_FG1R_SHIFT 16
-#define LDBBSAYR_FG1G_MASK (0xff << 8)
-#define LDBBSAYR_FG1G_SHIFT 8
-#define LDBBSAYR_FG1B_MASK (0xff << 0)
-#define LDBBSAYR_FG1B_SHIFT 0
-#define LDBnBSACR(n) (0xb20 + (n) * 0x20 + 0x14)
-#define LDBBSACR_FG2A_MASK (0xff << 24)
-#define LDBBSACR_FG2A_SHIFT 24
-#define LDBBSACR_FG2R_MASK (0xff << 16)
-#define LDBBSACR_FG2R_SHIFT 16
-#define LDBBSACR_FG2G_MASK (0xff << 8)
-#define LDBBSACR_FG2G_SHIFT 8
-#define LDBBSACR_FG2B_MASK (0xff << 0)
-#define LDBBSACR_FG2B_SHIFT 0
-#define LDBnBSAAR(n) (0xb20 + (n) * 0x20 + 0x18)
-#define LDBBSAAR_AP_MASK (0xff << 24)
-#define LDBBSAAR_AP_SHIFT 24
-#define LDBBSAAR_R_MASK (0xff << 16)
-#define LDBBSAAR_R_SHIFT 16
-#define LDBBSAAR_GY_MASK (0xff << 8)
-#define LDBBSAAR_GY_SHIFT 8
-#define LDBBSAAR_B_MASK (0xff << 0)
-#define LDBBSAAR_B_SHIFT 0
-#define LDBnBPPCR(n) (0xb20 + (n) * 0x20 + 0x1c)
-#define LDBBPPCR_AP_MASK (0xff << 24)
-#define LDBBPPCR_AP_SHIFT 24
-#define LDBBPPCR_R_MASK (0xff << 16)
-#define LDBBPPCR_R_SHIFT 16
-#define LDBBPPCR_GY_MASK (0xff << 8)
-#define LDBBPPCR_GY_SHIFT 8
-#define LDBBPPCR_B_MASK (0xff << 0)
-#define LDBBPPCR_B_SHIFT 0
-#define LDBnBBGCL(n) (0xb10 + (n) * 0x04)
-#define LDBBBGCL_BGA_MASK (0xff << 24)
-#define LDBBBGCL_BGA_SHIFT 24
-#define LDBBBGCL_BGR_MASK (0xff << 16)
-#define LDBBBGCL_BGR_SHIFT 16
-#define LDBBBGCL_BGG_MASK (0xff << 8)
-#define LDBBBGCL_BGG_SHIFT 8
-#define LDBBBGCL_BGB_MASK (0xff << 0)
-#define LDBBBGCL_BGB_SHIFT 0
-
-#define LCDC_SIDE_B_OFFSET 0x1000
-#define LCDC_MIRROR_OFFSET 0x2000
-
-static inline bool lcdc_is_banked(u32 reg)
-{
- switch (reg) {
- case LDMT1R:
- case LDMT2R:
- case LDMT3R:
- case LDDFR:
- case LDSM1R:
- case LDSA1R:
- case LDSA2R:
- case LDMLSR:
- case LDWBFR:
- case LDWBCNTR:
- case LDWBAR:
- case LDHCNR:
- case LDHSYNR:
- case LDVLNR:
- case LDVSYNR:
- case LDHPDR:
- case LDVPDR:
- case LDHAJR:
- return true;
- default:
- return reg >= LDBnBBGCL(0) && reg <= LDBnBPPCR(3);
- }
-}
-
-static inline void lcdc_write_mirror(struct shmob_drm_device *sdev, u32 reg,
- u32 data)
-{
- iowrite32(data, sdev->mmio + reg + LCDC_MIRROR_OFFSET);
-}
-
-static inline void lcdc_write(struct shmob_drm_device *sdev, u32 reg, u32 data)
-{
- iowrite32(data, sdev->mmio + reg);
- if (lcdc_is_banked(reg))
- iowrite32(data, sdev->mmio + reg + LCDC_SIDE_B_OFFSET);
-}
-
-static inline u32 lcdc_read(struct shmob_drm_device *sdev, u32 reg)
-{
- return ioread32(sdev->mmio + reg);
-}
-
-static inline int lcdc_wait_bit(struct shmob_drm_device *sdev, u32 reg,
- u32 mask, u32 until)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(5);
-
- while ((lcdc_read(sdev, reg) & mask) != until) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cpu_relax();
- }
-
- return 0;
-}
-
-#endif /* __SHMOB_DRM_REGS_H__ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 7:46 ` Laurent Pinchart
-1 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:46 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> set for each/sh, making the driver dead code except for the COMPILE_TEST
> case.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
No objection from me.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/Kconfig | 2 -
> drivers/gpu/drm/Makefile | 1 -
> drivers/gpu/drm/shmobile/Kconfig | 12 -
> drivers/gpu/drm/shmobile/Makefile | 8 -
> .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> 15 files changed, 1976 deletions(-)
> delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 7:46 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:46 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> set for each/sh, making the driver dead code except for the COMPILE_TEST
> case.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
No objection from me.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/Kconfig | 2 -
> drivers/gpu/drm/Makefile | 1 -
> drivers/gpu/drm/shmobile/Kconfig | 12 -
> drivers/gpu/drm/shmobile/Makefile | 8 -
> .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> 15 files changed, 1976 deletions(-)
> delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 7:46 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:46 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> set for each/sh, making the driver dead code except for the COMPILE_TEST
> case.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
No objection from me.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/Kconfig | 2 -
> drivers/gpu/drm/Makefile | 1 -
> drivers/gpu/drm/shmobile/Kconfig | 12 -
> drivers/gpu/drm/shmobile/Makefile | 8 -
> .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> 15 files changed, 1976 deletions(-)
> delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-01-13 7:46 ` Laurent Pinchart
(?)
@ 2023-01-13 7:55 ` Laurent Pinchart
-1 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:55 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > case.
> >
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
>
> No objection from me.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To expand a little bit on this, ARCH_SHMOBILE used to be set for the
ARM-based shmobile SoCs too, until
commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue Aug 28 17:10:10 2018 +0200
ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
making it dead code indeed.
I haven't tested this driver in ages, hence my lack of objection, but
someone may want to keep it for the pre-R-Car ARM SoCs.
Also, I just noticed that you forgot to update the MAINTAINERS file in
this patch to drop the drivers/gpu/drm/shmobile/ entry.
> > ---
> > drivers/gpu/drm/Kconfig | 2 -
> > drivers/gpu/drm/Makefile | 1 -
> > drivers/gpu/drm/shmobile/Kconfig | 12 -
> > drivers/gpu/drm/shmobile/Makefile | 8 -
> > .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> > .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> > drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> > drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> > drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> > drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> > drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> > drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> > 15 files changed, 1976 deletions(-)
> > delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> > delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 7:55 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:55 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > case.
> >
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
>
> No objection from me.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To expand a little bit on this, ARCH_SHMOBILE used to be set for the
ARM-based shmobile SoCs too, until
commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue Aug 28 17:10:10 2018 +0200
ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
making it dead code indeed.
I haven't tested this driver in ages, hence my lack of objection, but
someone may want to keep it for the pre-R-Car ARM SoCs.
Also, I just noticed that you forgot to update the MAINTAINERS file in
this patch to drop the drivers/gpu/drm/shmobile/ entry.
> > ---
> > drivers/gpu/drm/Kconfig | 2 -
> > drivers/gpu/drm/Makefile | 1 -
> > drivers/gpu/drm/shmobile/Kconfig | 12 -
> > drivers/gpu/drm/shmobile/Makefile | 8 -
> > .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> > .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> > drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> > drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> > drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> > drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> > drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> > drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> > 15 files changed, 1976 deletions(-)
> > delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> > delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 7:55 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 7:55 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > case.
> >
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
>
> No objection from me.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To expand a little bit on this, ARCH_SHMOBILE used to be set for the
ARM-based shmobile SoCs too, until
commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue Aug 28 17:10:10 2018 +0200
ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
making it dead code indeed.
I haven't tested this driver in ages, hence my lack of objection, but
someone may want to keep it for the pre-R-Car ARM SoCs.
Also, I just noticed that you forgot to update the MAINTAINERS file in
this patch to drop the drivers/gpu/drm/shmobile/ entry.
> > ---
> > drivers/gpu/drm/Kconfig | 2 -
> > drivers/gpu/drm/Makefile | 1 -
> > drivers/gpu/drm/shmobile/Kconfig | 12 -
> > drivers/gpu/drm/shmobile/Makefile | 8 -
> > .../gpu/drm/shmobile/shmob_drm_backlight.c | 82 ---
> > .../gpu/drm/shmobile/shmob_drm_backlight.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 683 ------------------
> > drivers/gpu/drm/shmobile/shmob_drm_crtc.h | 55 --
> > drivers/gpu/drm/shmobile/shmob_drm_drv.c | 303 --------
> > drivers/gpu/drm/shmobile/shmob_drm_drv.h | 42 --
> > drivers/gpu/drm/shmobile/shmob_drm_kms.c | 150 ----
> > drivers/gpu/drm/shmobile/shmob_drm_kms.h | 29 -
> > drivers/gpu/drm/shmobile/shmob_drm_plane.c | 261 -------
> > drivers/gpu/drm/shmobile/shmob_drm_plane.h | 19 -
> > drivers/gpu/drm/shmobile/shmob_drm_regs.h | 310 --------
> > 15 files changed, 1976 deletions(-)
> > delete mode 100644 drivers/gpu/drm/shmobile/Kconfig
> > delete mode 100644 drivers/gpu/drm/shmobile/Makefile
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_backlight.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_crtc.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_drv.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_kms.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.c
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_plane.h
> > delete mode 100644 drivers/gpu/drm/shmobile/shmob_drm_regs.h
--
Regards,
Laurent Pinchart
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-01-13 7:55 ` Laurent Pinchart
(?)
@ 2023-01-13 8:19 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:19 UTC (permalink / raw)
To: Laurent Pinchart
Cc: linux-fbdev, Rich Felker, linux-sh, alsa-devel, dri-devel,
linux-mtd, linux-i2c, Christoph Hellwig, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
On Fri, Jan 13, 2023 at 8:55 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> > On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > > case.
> > >
> > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> >
> > No objection from me.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> To expand a little bit on this, ARCH_SHMOBILE used to be set for the
> ARM-based shmobile SoCs too, until
>
> commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
> Author: Geert Uytterhoeven <geert+renesas@glider.be>
> Date: Tue Aug 28 17:10:10 2018 +0200
>
> ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
>
> All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
> platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
> to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
> 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
> making it dead code indeed.
Note that it wasn't updated because this driver was not used on Renesas
ARM platforms, due to the lack of DT bindings and DT support, so it
didn't make sense to make it selectable.
> I haven't tested this driver in ages, hence my lack of objection, but
> someone may want to keep it for the pre-R-Car ARM SoCs.
Indeed, this driver should work with the R-Mobile A1 (which made it
into orbit, so we could call it the first member of R-Space ;-) and
SH-Mobile AG5 SoCs. The major blocker is the lack of DT bindings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 8:19 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:19 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 8:55 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> > On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > > case.
> > >
> > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> >
> > No objection from me.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> To expand a little bit on this, ARCH_SHMOBILE used to be set for the
> ARM-based shmobile SoCs too, until
>
> commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
> Author: Geert Uytterhoeven <geert+renesas@glider.be>
> Date: Tue Aug 28 17:10:10 2018 +0200
>
> ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
>
> All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
> platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
> to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
> 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
> making it dead code indeed.
Note that it wasn't updated because this driver was not used on Renesas
ARM platforms, due to the lack of DT bindings and DT support, so it
didn't make sense to make it selectable.
> I haven't tested this driver in ages, hence my lack of objection, but
> someone may want to keep it for the pre-R-Car ARM SoCs.
Indeed, this driver should work with the R-Mobile A1 (which made it
into orbit, so we could call it the first member of R-Space ;-) and
SH-Mobile AG5 SoCs. The major blocker is the lack of DT bindings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-01-13 8:19 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:19 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 8:55 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Jan 13, 2023 at 09:46:49AM +0200, Laurent Pinchart wrote:
> > On Fri, Jan 13, 2023 at 07:23:18AM +0100, Christoph Hellwig wrote:
> > > This driver depends on ARM && ARCH_SHMOBILE, but ARCH_SHMOBILE can only be
> > > set for each/sh, making the driver dead code except for the COMPILE_TEST
> > > case.
> > >
> > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> >
> > No objection from me.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> To expand a little bit on this, ARCH_SHMOBILE used to be set for the
> ARM-based shmobile SoCs too, until
>
> commit 08e735233ea29b17bfec8e4cb302e799d9f920b8
> Author: Geert Uytterhoeven <geert+renesas@glider.be>
> Date: Tue Aug 28 17:10:10 2018 +0200
>
> ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
>
> All drivers for Renesas ARM SoCs have gained proper ARCH_RENESAS
> platform dependencies. Hence finish the conversion from ARCH_SHMOBILE
> to ARCH_RENESAS for Renesas 32-bit ARM SoCs, as started by commit
> 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> merged in v4.20. The DRM shmobile driver's Kconfig entry wasn't updated,
> making it dead code indeed.
Note that it wasn't updated because this driver was not used on Renesas
ARM platforms, due to the lack of DT bindings and DT support, so it
didn't make sense to make it selectable.
> I haven't tested this driver in ages, hence my lack of objection, but
> someone may want to keep it for the pre-R-Car ARM SoCs.
Indeed, this driver should work with the R-Mobile A1 (which made it
into orbit, so we could call it the first member of R-Space ;-) and
SH-Mobile AG5 SoCs. The major blocker is the lack of DT bindings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-01-13 7:46 ` Laurent Pinchart
(?)
@ 2023-02-03 7:15 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
So given that the big series doesn't go in, can we get this removal
picked up through the drm tree?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 7:15 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Laurent Pinchart
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
So given that the big series doesn't go in, can we get this removal
picked up through the drm tree?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 7:15 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
So given that the big series doesn't go in, can we get this removal
picked up through the drm tree?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-02-03 7:15 ` Christoph Hellwig
(?)
@ 2023-02-03 13:49 ` Laurent Pinchart
-1 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-02-03 13:49 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> So given that the big series doesn't go in, can we get this removal
> picked up through the drm tree?
Geert has a board with an ARM-based SoC compatible with this driver, and
he expressed interest in taking over maintainership. Geert, could you
share your plans ? Should the shmobile_drm driver be dropped now, or
will you revive it in a relatively near future ?
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 13:49 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-02-03 13:49 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> So given that the big series doesn't go in, can we get this removal
> picked up through the drm tree?
Geert has a board with an ARM-based SoC compatible with this driver, and
he expressed interest in taking over maintainership. Geert, could you
share your plans ? Should the shmobile_drm driver be dropped now, or
will you revive it in a relatively near future ?
--
Regards,
Laurent Pinchart
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 13:49 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-02-03 13:49 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> So given that the big series doesn't go in, can we get this removal
> picked up through the drm tree?
Geert has a board with an ARM-based SoC compatible with this driver, and
he expressed interest in taking over maintainership. Geert, could you
share your plans ? Should the shmobile_drm driver be dropped now, or
will you revive it in a relatively near future ?
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
2023-02-03 13:49 ` Laurent Pinchart
(?)
@ 2023-02-03 13:53 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 13:53 UTC (permalink / raw)
To: Laurent Pinchart
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Laurent,
On Fri, Feb 3, 2023 at 2:49 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> > So given that the big series doesn't go in, can we get this removal
> > picked up through the drm tree?
>
> Geert has a board with an ARM-based SoC compatible with this driver, and
> he expressed interest in taking over maintainership. Geert, could you
> share your plans ? Should the shmobile_drm driver be dropped now, or
> will you revive it in a relatively near future ?
(Trying to) get it working on that board is on my list...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 13:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 13:53 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Laurent,
On Fri, Feb 3, 2023 at 2:49 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> > So given that the big series doesn't go in, can we get this removal
> > picked up through the drm tree?
>
> Geert has a board with an ARM-based SoC compatible with this driver, and
> he expressed interest in taking over maintainership. Geert, could you
> share your plans ? Should the shmobile_drm driver be dropped now, or
> will you revive it in a relatively near future ?
(Trying to) get it working on that board is on my list...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
@ 2023-02-03 13:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 13:53 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Laurent,
On Fri, Feb 3, 2023 at 2:49 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Fri, Feb 03, 2023 at 08:15:06AM +0100, Christoph Hellwig wrote:
> > So given that the big series doesn't go in, can we get this removal
> > picked up through the drm tree?
>
> Geert has a board with an ARM-based SoC compatible with this driver, and
> he expressed interest in taking over maintainership. Geert, could you
> share your plans ? Should the shmobile_drm driver be dropped now, or
> will you revive it in a relatively near future ?
(Trying to) get it working on that board is on my list...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
USB_OHCI_SH is a dummy option that never builds any code, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d799d23c476e1..ca5f657c092cf4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
If unsure, say N.
-config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller (DEPRECATED)"
- depends on SUPERH || COMPILE_TEST
- select USB_OHCI_HCD_PLATFORM
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enables support for the on-chip OHCI controller on the SuperH.
- If you use the PCI OHCI controller, this option is not necessary.
-
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
USB_OHCI_SH is a dummy option that never builds any code, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d799d23c476e1..ca5f657c092cf4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
If unsure, say N.
-config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller (DEPRECATED)"
- depends on SUPERH || COMPILE_TEST
- select USB_OHCI_HCD_PLATFORM
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enables support for the on-chip OHCI controller on the SuperH.
- If you use the PCI OHCI controller, this option is not necessary.
-
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
USB_OHCI_SH is a dummy option that never builds any code, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d799d23c476e1..ca5f657c092cf4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
If unsure, say N.
-config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller (DEPRECATED)"
- depends on SUPERH || COMPILE_TEST
- select USB_OHCI_HCD_PLATFORM
- help
- This option is deprecated now and the driver was removed, use
- USB_OHCI_HCD_PLATFORM instead.
-
- Enables support for the on-chip OHCI controller on the SuperH.
- If you use the PCI OHCI controller, this option is not necessary.
-
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 7:12 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-01-13 7:12 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio, netdev,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/usb/host/Kconfig | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 8d799d23c476e1..ca5f657c092cf4 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> --
> 2.39.0
>
Do you want all of these to go through a single tree, or can they go
through the different driver subsystem trees?
If single:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If not, I'll be glad to take this.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 7:12 ` Greg Kroah-Hartman
0 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-01-13 7:12 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/usb/host/Kconfig | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 8d799d23c476e1..ca5f657c092cf4 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> --
> 2.39.0
>
Do you want all of these to go through a single tree, or can they go
through the different driver subsystem trees?
If single:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If not, I'll be glad to take this.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 7:12 ` Greg Kroah-Hartman
0 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-01-13 7:12 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/usb/host/Kconfig | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 8d799d23c476e1..ca5f657c092cf4 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> --
> 2.39.0
>
Do you want all of these to go through a single tree, or can they go
through the different driver subsystem trees?
If single:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If not, I'll be glad to take this.
thanks,
greg k-h
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 7:12 ` Greg Kroah-Hartman
(?)
@ 2023-01-13 7:14 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 7:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
>
> If single:
>
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> If not, I'll be glad to take this.
I think taking all the patches together would make most sense.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 7:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
>
> If single:
>
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> If not, I'll be glad to take this.
I think taking all the patches together would make most sense.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 7:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Laurent Pinchart, netdev, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
dmaengine, linux-rtc
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
>
> If single:
>
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> If not, I'll be glad to take this.
I think taking all the patches together would make most sense.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 7:12 ` Greg Kroah-Hartman
(?)
@ 2023-01-15 0:55 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-15 0:55 UTC (permalink / raw)
To: Greg Kroah-Hartman, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/13/23 01:12, Greg Kroah-Hartman wrote:
> On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
>> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/usb/host/Kconfig | 11 -----------
>> 1 file changed, 11 deletions(-)
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index 8d799d23c476e1..ca5f657c092cf4 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>>
>> If unsure, say N.
>>
>> -config USB_OHCI_SH
>> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
>> - depends on SUPERH || COMPILE_TEST
>> - select USB_OHCI_HCD_PLATFORM
>> - help
>> - This option is deprecated now and the driver was removed, use
>> - USB_OHCI_HCD_PLATFORM instead.
>> -
>> - Enables support for the on-chip OHCI controller on the SuperH.
>> - If you use the PCI OHCI controller, this option is not necessary.
>> -
>> config USB_OHCI_EXYNOS
>> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
>> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
>> --
>> 2.39.0
>>
>
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Neither please. Multiple people are objecting.
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-15 0:55 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-15 0:55 UTC (permalink / raw)
To: Greg Kroah-Hartman, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/13/23 01:12, Greg Kroah-Hartman wrote:
> On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
>> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/usb/host/Kconfig | 11 -----------
>> 1 file changed, 11 deletions(-)
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index 8d799d23c476e1..ca5f657c092cf4 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>>
>> If unsure, say N.
>>
>> -config USB_OHCI_SH
>> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
>> - depends on SUPERH || COMPILE_TEST
>> - select USB_OHCI_HCD_PLATFORM
>> - help
>> - This option is deprecated now and the driver was removed, use
>> - USB_OHCI_HCD_PLATFORM instead.
>> -
>> - Enables support for the on-chip OHCI controller on the SuperH.
>> - If you use the PCI OHCI controller, this option is not necessary.
>> -
>> config USB_OHCI_EXYNOS
>> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
>> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
>> --
>> 2.39.0
>>
>
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Neither please. Multiple people are objecting.
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-15 0:55 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-15 0:55 UTC (permalink / raw)
To: Greg Kroah-Hartman, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio, netdev,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, dmaengine, alsa-devel, Laurent Pinchart
On 1/13/23 01:12, Greg Kroah-Hartman wrote:
> On Fri, Jan 13, 2023 at 07:23:19AM +0100, Christoph Hellwig wrote:
>> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/usb/host/Kconfig | 11 -----------
>> 1 file changed, 11 deletions(-)
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index 8d799d23c476e1..ca5f657c092cf4 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>>
>> If unsure, say N.
>>
>> -config USB_OHCI_SH
>> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
>> - depends on SUPERH || COMPILE_TEST
>> - select USB_OHCI_HCD_PLATFORM
>> - help
>> - This option is deprecated now and the driver was removed, use
>> - USB_OHCI_HCD_PLATFORM instead.
>> -
>> - Enables support for the on-chip OHCI controller on the SuperH.
>> - If you use the PCI OHCI controller, this option is not necessary.
>> -
>> config USB_OHCI_EXYNOS
>> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
>> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
>> --
>> 2.39.0
>>
>
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Neither please. Multiple people are objecting.
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 7:12 ` Greg Kroah-Hartman
(?)
@ 2023-02-03 7:15 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Looks like the big removal isn't going in for this merge winodw,
so can you queue this patch up after all Greg?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-02-03 7:15 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Looks like the big removal isn't going in for this merge winodw,
so can you queue this patch up after all Greg?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-02-03 7:15 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:15 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Laurent Pinchart, netdev, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
dmaengine, linux-rtc
On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> Do you want all of these to go through a single tree, or can they go
> through the different driver subsystem trees?
Looks like the big removal isn't going in for this merge winodw,
so can you queue this patch up after all Greg?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-02-03 7:15 ` Christoph Hellwig
(?)
@ 2023-02-03 7:25 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-02-03 7:25 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 08:15:42AM +0100, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> > Do you want all of these to go through a single tree, or can they go
> > through the different driver subsystem trees?
>
> Looks like the big removal isn't going in for this merge winodw,
> so can you queue this patch up after all Greg?
Sure, I'll go apply it right now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-02-03 7:25 ` Greg Kroah-Hartman
0 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-02-03 7:25 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 08:15:42AM +0100, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> > Do you want all of these to go through a single tree, or can they go
> > through the different driver subsystem trees?
>
> Looks like the big removal isn't going in for this merge winodw,
> so can you queue this patch up after all Greg?
Sure, I'll go apply it right now, thanks.
greg k-h
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-02-03 7:25 ` Greg Kroah-Hartman
0 siblings, 0 replies; 263+ messages in thread
From: Greg Kroah-Hartman @ 2023-02-03 7:25 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio, netdev,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Feb 03, 2023 at 08:15:42AM +0100, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 08:12:44AM +0100, Greg Kroah-Hartman wrote:
> > Do you want all of these to go through a single tree, or can they go
> > through the different driver subsystem trees?
>
> Looks like the big removal isn't going in for this merge winodw,
> so can you queue this patch up after all Greg?
Sure, I'll go apply it right now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:59 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:59 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, Jan 13, 2023 at 7:23 AM Christoph Hellwig <hch@lst.de> wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
Nice catch!
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
At this point in the series, there are still selects and enablements of
USB_OHCI_SH in arch/sh/Kconfig and arch/sh/configs/sh7757lcr_defconfig.
I think it would be good to replace them by USB_OHCI_HCD_PLATFORM first,
to decouple the fate of this patch from the rest of the series.
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 8:59 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:59 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Christoph,
On Fri, Jan 13, 2023 at 7:23 AM Christoph Hellwig <hch@lst.de> wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
Nice catch!
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
At this point in the series, there are still selects and enablements of
USB_OHCI_SH in arch/sh/Kconfig and arch/sh/configs/sh7757lcr_defconfig.
I think it would be good to replace them by USB_OHCI_HCD_PLATFORM first,
to decouple the fate of this patch from the rest of the series.
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
@ 2023-01-13 8:59 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:59 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, Jan 13, 2023 at 7:23 AM Christoph Hellwig <hch@lst.de> wrote:
> USB_OHCI_SH is a dummy option that never builds any code, remove it.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
Nice catch!
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -548,17 +548,6 @@ config USB_OHCI_HCD_SSB
>
> If unsure, say N.
>
> -config USB_OHCI_SH
> - bool "OHCI support for SuperH USB controller (DEPRECATED)"
> - depends on SUPERH || COMPILE_TEST
> - select USB_OHCI_HCD_PLATFORM
> - help
> - This option is deprecated now and the driver was removed, use
> - USB_OHCI_HCD_PLATFORM instead.
> -
> - Enables support for the on-chip OHCI controller on the SuperH.
> - If you use the PCI OHCI controller, this option is not necessary.
> -
At this point in the series, there are still selects and enablements of
USB_OHCI_SH in arch/sh/Kconfig and arch/sh/configs/sh7757lcr_defconfig.
I think it would be good to replace them by USB_OHCI_HCD_PLATFORM first,
to decouple the fate of this patch from the rest of the series.
> config USB_OHCI_EXYNOS
> tristate "OHCI support for Samsung S5P/Exynos SoC Series"
> depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 03/22] remove arch/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
The Linux SH port has been mostly abandoned for years, with the last
minor maintainer updated being in November 2021. Drop it as it drags
maintainance of the rest of the kernel down.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
Documentation/arch.rst | 1 -
Documentation/sh/booting.rst | 12 -
Documentation/sh/features.rst | 3 -
Documentation/sh/index.rst | 56 -
Documentation/sh/new-machine.rst | 277 ---
Documentation/sh/register-banks.rst | 40 -
MAINTAINERS | 10 -
arch/sh/Kbuild | 7 -
arch/sh/Kconfig | 793 --------
arch/sh/Kconfig.cpu | 100 -
arch/sh/Kconfig.debug | 78 -
arch/sh/Makefile | 215 ---
arch/sh/boards/Kconfig | 400 ----
arch/sh/boards/Makefile | 20 -
arch/sh/boards/board-apsh4a3a.c | 182 --
arch/sh/boards/board-apsh4ad0a.c | 132 --
arch/sh/boards/board-edosk7705.c | 79 -
arch/sh/boards/board-edosk7760.c | 178 --
arch/sh/boards/board-espt.c | 105 --
arch/sh/boards/board-magicpanelr2.c | 390 ----
arch/sh/boards/board-polaris.c | 156 --
arch/sh/boards/board-secureedge5410.c | 75 -
arch/sh/boards/board-sh2007.c | 146 --
arch/sh/boards/board-sh7757lcr.c | 604 -------
arch/sh/boards/board-sh7785lcr.c | 384 ----
arch/sh/boards/board-shmin.c | 35 -
arch/sh/boards/board-titan.c | 21 -
arch/sh/boards/board-urquell.c | 218 ---
arch/sh/boards/mach-ap325rxa/Makefile | 3 -
arch/sh/boards/mach-ap325rxa/sdram.S | 66 -
arch/sh/boards/mach-ap325rxa/setup.c | 573 ------
arch/sh/boards/mach-dreamcast/Makefile | 7 -
arch/sh/boards/mach-dreamcast/irq.c | 155 --
arch/sh/boards/mach-dreamcast/rtc.c | 96 -
arch/sh/boards/mach-dreamcast/setup.c | 39 -
arch/sh/boards/mach-ecovec24/Makefile | 10 -
arch/sh/boards/mach-ecovec24/sdram.S | 108 --
arch/sh/boards/mach-ecovec24/setup.c | 1521 ----------------
arch/sh/boards/mach-highlander/Kconfig | 26 -
arch/sh/boards/mach-highlander/Makefile | 12 -
arch/sh/boards/mach-highlander/irq-r7780mp.c | 71 -
arch/sh/boards/mach-highlander/irq-r7780rp.c | 64 -
arch/sh/boards/mach-highlander/irq-r7785rp.c | 83 -
.../boards/mach-highlander/pinmux-r7785rp.c | 17 -
arch/sh/boards/mach-highlander/psw.c | 119 --
arch/sh/boards/mach-highlander/setup.c | 416 -----
arch/sh/boards/mach-hp6xx/Makefile | 8 -
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 109 --
arch/sh/boards/mach-hp6xx/pm.c | 156 --
arch/sh/boards/mach-hp6xx/pm_wakeup.S | 39 -
arch/sh/boards/mach-hp6xx/setup.c | 172 --
arch/sh/boards/mach-kfr2r09/Makefile | 5 -
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 275 ---
arch/sh/boards/mach-kfr2r09/sdram.S | 77 -
arch/sh/boards/mach-kfr2r09/setup.c | 649 -------
arch/sh/boards/mach-landisk/Makefile | 6 -
arch/sh/boards/mach-landisk/gio.c | 164 --
arch/sh/boards/mach-landisk/irq.c | 63 -
arch/sh/boards/mach-landisk/psw.c | 140 --
arch/sh/boards/mach-landisk/setup.c | 102 --
arch/sh/boards/mach-lboxre2/Makefile | 6 -
arch/sh/boards/mach-lboxre2/irq.c | 27 -
arch/sh/boards/mach-lboxre2/setup.c | 79 -
arch/sh/boards/mach-microdev/Makefile | 6 -
arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157 --
arch/sh/boards/mach-microdev/io.c | 123 --
arch/sh/boards/mach-microdev/irq.c | 150 --
arch/sh/boards/mach-microdev/setup.c | 197 --
arch/sh/boards/mach-migor/Kconfig | 16 -
arch/sh/boards/mach-migor/Makefile | 3 -
arch/sh/boards/mach-migor/lcd_qvga.c | 163 --
arch/sh/boards/mach-migor/sdram.S | 66 -
arch/sh/boards/mach-migor/setup.c | 649 -------
arch/sh/boards/mach-r2d/Kconfig | 24 -
arch/sh/boards/mach-r2d/Makefile | 6 -
arch/sh/boards/mach-r2d/irq.c | 156 --
arch/sh/boards/mach-r2d/setup.c | 305 ----
arch/sh/boards/mach-rsk/Kconfig | 29 -
arch/sh/boards/mach-rsk/Makefile | 5 -
arch/sh/boards/mach-rsk/devices-rsk7203.c | 137 --
arch/sh/boards/mach-rsk/devices-rsk7264.c | 55 -
arch/sh/boards/mach-rsk/devices-rsk7269.c | 57 -
arch/sh/boards/mach-rsk/setup.c | 84 -
arch/sh/boards/mach-sdk7780/Kconfig | 17 -
arch/sh/boards/mach-sdk7780/Makefile | 6 -
arch/sh/boards/mach-sdk7780/irq.c | 43 -
arch/sh/boards/mach-sdk7780/setup.c | 96 -
arch/sh/boards/mach-sdk7786/Makefile | 5 -
arch/sh/boards/mach-sdk7786/fpga.c | 69 -
arch/sh/boards/mach-sdk7786/gpio.c | 46 -
arch/sh/boards/mach-sdk7786/irq.c | 45 -
arch/sh/boards/mach-sdk7786/nmi.c | 80 -
arch/sh/boards/mach-sdk7786/setup.c | 266 ---
arch/sh/boards/mach-sdk7786/sram.c | 69 -
arch/sh/boards/mach-se/7206/Makefile | 6 -
arch/sh/boards/mach-se/7206/irq.c | 151 --
arch/sh/boards/mach-se/7206/setup.c | 96 -
arch/sh/boards/mach-se/7343/Makefile | 6 -
arch/sh/boards/mach-se/7343/irq.c | 123 --
arch/sh/boards/mach-se/7343/setup.c | 182 --
arch/sh/boards/mach-se/770x/Makefile | 6 -
arch/sh/boards/mach-se/770x/irq.c | 109 --
arch/sh/boards/mach-se/770x/setup.c | 205 ---
arch/sh/boards/mach-se/7721/Makefile | 2 -
arch/sh/boards/mach-se/7721/irq.c | 42 -
arch/sh/boards/mach-se/7721/setup.c | 92 -
arch/sh/boards/mach-se/7722/Makefile | 11 -
arch/sh/boards/mach-se/7722/irq.c | 116 --
arch/sh/boards/mach-se/7722/setup.c | 190 --
arch/sh/boards/mach-se/7724/Makefile | 11 -
arch/sh/boards/mach-se/7724/irq.c | 143 --
arch/sh/boards/mach-se/7724/sdram.S | 128 --
arch/sh/boards/mach-se/7724/setup.c | 986 ----------
arch/sh/boards/mach-se/7751/Makefile | 6 -
arch/sh/boards/mach-se/7751/irq.c | 51 -
arch/sh/boards/mach-se/7751/setup.c | 60 -
arch/sh/boards/mach-se/7780/Makefile | 11 -
arch/sh/boards/mach-se/7780/irq.c | 65 -
arch/sh/boards/mach-se/7780/setup.c | 111 --
arch/sh/boards/mach-se/Makefile | 11 -
arch/sh/boards/mach-se/board-se7619.c | 27 -
arch/sh/boards/mach-sh03/Makefile | 7 -
arch/sh/boards/mach-sh03/rtc.c | 143 --
arch/sh/boards/mach-sh03/setup.c | 97 -
arch/sh/boards/mach-sh7763rdp/Makefile | 2 -
arch/sh/boards/mach-sh7763rdp/irq.c | 42 -
arch/sh/boards/mach-sh7763rdp/setup.c | 213 ---
arch/sh/boards/mach-x3proto/Makefile | 4 -
arch/sh/boards/mach-x3proto/gpio.c | 136 --
arch/sh/boards/mach-x3proto/ilsel.c | 156 --
arch/sh/boards/mach-x3proto/setup.c | 270 ---
arch/sh/boards/of-generic.c | 172 --
arch/sh/boot/.gitignore | 5 -
arch/sh/boot/Makefile | 115 --
arch/sh/boot/compressed/.gitignore | 2 -
arch/sh/boot/compressed/Makefile | 66 -
arch/sh/boot/compressed/ashiftrt.S | 2 -
arch/sh/boot/compressed/ashldi3.c | 2 -
arch/sh/boot/compressed/ashlsi3.S | 2 -
arch/sh/boot/compressed/ashrsi3.S | 2 -
arch/sh/boot/compressed/cache.c | 13 -
arch/sh/boot/compressed/head_32.S | 126 --
arch/sh/boot/compressed/head_64.S | 159 --
arch/sh/boot/compressed/lshrsi3.S | 2 -
arch/sh/boot/compressed/misc.c | 146 --
arch/sh/boot/compressed/vmlinux.scr | 10 -
arch/sh/boot/dts/Makefile | 2 -
arch/sh/boot/dts/j2_mimas_v2.dts | 99 -
arch/sh/boot/romimage/Makefile | 30 -
arch/sh/boot/romimage/head.S | 85 -
arch/sh/boot/romimage/mmcif-sh7724.c | 78 -
arch/sh/boot/romimage/vmlinux.scr | 8 -
arch/sh/cchips/Kconfig | 46 -
arch/sh/cchips/hd6446x/Makefile | 4 -
arch/sh/cchips/hd6446x/hd64461.c | 112 --
arch/sh/configs/ap325rxa_defconfig | 103 --
arch/sh/configs/apsh4a3a_defconfig | 91 -
arch/sh/configs/apsh4ad0a_defconfig | 122 --
arch/sh/configs/dreamcast_defconfig | 72 -
arch/sh/configs/ecovec24-romimage_defconfig | 58 -
arch/sh/configs/ecovec24_defconfig | 132 --
arch/sh/configs/edosk7705_defconfig | 35 -
arch/sh/configs/edosk7760_defconfig | 114 --
arch/sh/configs/espt_defconfig | 114 --
arch/sh/configs/hp6xx_defconfig | 60 -
arch/sh/configs/j2_defconfig | 42 -
arch/sh/configs/kfr2r09-romimage_defconfig | 53 -
arch/sh/configs/kfr2r09_defconfig | 84 -
arch/sh/configs/landisk_defconfig | 115 --
arch/sh/configs/lboxre2_defconfig | 62 -
arch/sh/configs/magicpanelr2_defconfig | 90 -
arch/sh/configs/microdev_defconfig | 43 -
arch/sh/configs/migor_defconfig | 94 -
arch/sh/configs/polaris_defconfig | 83 -
arch/sh/configs/r7780mp_defconfig | 109 --
arch/sh/configs/r7785rp_defconfig | 107 --
arch/sh/configs/rsk7201_defconfig | 63 -
arch/sh/configs/rsk7203_defconfig | 121 --
arch/sh/configs/rsk7264_defconfig | 71 -
arch/sh/configs/rsk7269_defconfig | 56 -
arch/sh/configs/rts7751r2d1_defconfig | 91 -
arch/sh/configs/rts7751r2dplus_defconfig | 96 -
arch/sh/configs/sdk7780_defconfig | 139 --
arch/sh/configs/sdk7786_defconfig | 217 ---
arch/sh/configs/se7206_defconfig | 108 --
arch/sh/configs/se7343_defconfig | 96 -
arch/sh/configs/se7619_defconfig | 43 -
arch/sh/configs/se7705_defconfig | 54 -
arch/sh/configs/se7712_defconfig | 101 --
arch/sh/configs/se7721_defconfig | 127 --
arch/sh/configs/se7722_defconfig | 56 -
arch/sh/configs/se7724_defconfig | 132 --
arch/sh/configs/se7750_defconfig | 55 -
arch/sh/configs/se7751_defconfig | 46 -
arch/sh/configs/se7780_defconfig | 106 --
arch/sh/configs/secureedge5410_defconfig | 53 -
arch/sh/configs/sh03_defconfig | 126 --
arch/sh/configs/sh2007_defconfig | 199 --
arch/sh/configs/sh7710voipgw_defconfig | 55 -
arch/sh/configs/sh7724_generic_defconfig | 41 -
arch/sh/configs/sh7757lcr_defconfig | 85 -
arch/sh/configs/sh7763rdp_defconfig | 116 --
arch/sh/configs/sh7770_generic_defconfig | 43 -
arch/sh/configs/sh7785lcr_32bit_defconfig | 149 --
arch/sh/configs/sh7785lcr_defconfig | 117 --
arch/sh/configs/shmin_defconfig | 52 -
arch/sh/configs/shx3_defconfig | 103 --
arch/sh/configs/titan_defconfig | 272 ---
arch/sh/configs/ul2_defconfig | 84 -
arch/sh/configs/urquell_defconfig | 147 --
arch/sh/drivers/Kconfig | 20 -
arch/sh/drivers/Makefile | 11 -
arch/sh/drivers/dma/Kconfig | 74 -
arch/sh/drivers/dma/Makefile | 9 -
arch/sh/drivers/dma/dma-api.c | 417 -----
arch/sh/drivers/dma/dma-g2.c | 197 --
arch/sh/drivers/dma/dma-pvr2.c | 102 --
arch/sh/drivers/dma/dma-sh.c | 414 -----
arch/sh/drivers/dma/dma-sysfs.c | 164 --
arch/sh/drivers/dma/dmabrg.c | 196 --
arch/sh/drivers/heartbeat.c | 152 --
arch/sh/drivers/pci/Makefile | 27 -
arch/sh/drivers/pci/common.c | 159 --
arch/sh/drivers/pci/fixups-dreamcast.c | 84 -
arch/sh/drivers/pci/fixups-landisk.c | 57 -
arch/sh/drivers/pci/fixups-r7780rp.c | 18 -
arch/sh/drivers/pci/fixups-rts7751r2d.c | 64 -
arch/sh/drivers/pci/fixups-sdk7780.c | 40 -
arch/sh/drivers/pci/fixups-sdk7786.c | 64 -
arch/sh/drivers/pci/fixups-se7751.c | 113 --
arch/sh/drivers/pci/fixups-sh03.c | 33 -
arch/sh/drivers/pci/fixups-snapgear.c | 37 -
arch/sh/drivers/pci/fixups-titan.c | 36 -
arch/sh/drivers/pci/ops-dreamcast.c | 79 -
arch/sh/drivers/pci/ops-sh4.c | 105 --
arch/sh/drivers/pci/ops-sh7786.c | 168 --
arch/sh/drivers/pci/pci-dreamcast.c | 97 -
arch/sh/drivers/pci/pci-sh4.h | 182 --
arch/sh/drivers/pci/pci-sh7751.c | 179 --
arch/sh/drivers/pci/pci-sh7751.h | 126 --
arch/sh/drivers/pci/pci-sh7780.c | 407 -----
arch/sh/drivers/pci/pci-sh7780.h | 43 -
arch/sh/drivers/pci/pci.c | 298 ---
arch/sh/drivers/pci/pcie-sh7786.c | 609 -------
arch/sh/drivers/pci/pcie-sh7786.h | 577 ------
arch/sh/drivers/platform_early.c | 340 ----
arch/sh/drivers/push-switch.c | 136 --
arch/sh/drivers/superhyway/Makefile | 7 -
arch/sh/drivers/superhyway/ops-sh4-202.c | 168 --
arch/sh/include/asm/Kbuild | 5 -
arch/sh/include/asm/adc.h | 12 -
arch/sh/include/asm/addrspace.h | 63 -
arch/sh/include/asm/alignment.h | 22 -
arch/sh/include/asm/asm-offsets.h | 2 -
arch/sh/include/asm/atomic-grb.h | 86 -
arch/sh/include/asm/atomic-irq.h | 72 -
arch/sh/include/asm/atomic-llsc.h | 88 -
arch/sh/include/asm/atomic.h | 38 -
arch/sh/include/asm/barrier.h | 45 -
arch/sh/include/asm/bitops-cas.h | 94 -
arch/sh/include/asm/bitops-grb.h | 173 --
arch/sh/include/asm/bitops-llsc.h | 147 --
arch/sh/include/asm/bitops-op32.h | 143 --
arch/sh/include/asm/bitops.h | 72 -
arch/sh/include/asm/bl_bit.h | 2 -
arch/sh/include/asm/bl_bit_32.h | 34 -
arch/sh/include/asm/bug.h | 121 --
arch/sh/include/asm/bugs.h | 74 -
arch/sh/include/asm/cache.h | 46 -
arch/sh/include/asm/cache_insns.h | 2 -
arch/sh/include/asm/cache_insns_32.h | 22 -
arch/sh/include/asm/cacheflush.h | 106 --
arch/sh/include/asm/checksum.h | 2 -
arch/sh/include/asm/checksum_32.h | 203 ---
arch/sh/include/asm/clock.h | 17 -
arch/sh/include/asm/cmpxchg-cas.h | 25 -
arch/sh/include/asm/cmpxchg-grb.h | 95 -
arch/sh/include/asm/cmpxchg-irq.h | 54 -
arch/sh/include/asm/cmpxchg-llsc.h | 53 -
arch/sh/include/asm/cmpxchg-xchg.h | 50 -
arch/sh/include/asm/cmpxchg.h | 74 -
arch/sh/include/asm/device.h | 17 -
arch/sh/include/asm/dma-register.h | 50 -
arch/sh/include/asm/dma.h | 140 --
arch/sh/include/asm/dmabrg.h | 24 -
arch/sh/include/asm/dwarf.h | 417 -----
arch/sh/include/asm/elf.h | 211 ---
arch/sh/include/asm/entry-macros.S | 123 --
arch/sh/include/asm/extable.h | 7 -
arch/sh/include/asm/fb.h | 20 -
arch/sh/include/asm/fixmap.h | 86 -
arch/sh/include/asm/flat.h | 33 -
arch/sh/include/asm/fpu.h | 69 -
arch/sh/include/asm/freq.h | 12 -
arch/sh/include/asm/ftrace.h | 48 -
arch/sh/include/asm/futex-cas.h | 35 -
arch/sh/include/asm/futex-irq.h | 25 -
arch/sh/include/asm/futex-llsc.h | 42 -
arch/sh/include/asm/futex.h | 72 -
arch/sh/include/asm/gpio.h | 50 -
arch/sh/include/asm/hardirq.h | 11 -
arch/sh/include/asm/hd64461.h | 252 ---
arch/sh/include/asm/heartbeat.h | 19 -
arch/sh/include/asm/hugetlb.h | 38 -
arch/sh/include/asm/hw_breakpoint.h | 70 -
arch/sh/include/asm/hw_irq.h | 36 -
arch/sh/include/asm/i2c-sh7760.h | 21 -
arch/sh/include/asm/io.h | 294 ---
arch/sh/include/asm/io_generic.h | 19 -
arch/sh/include/asm/io_noioport.h | 86 -
arch/sh/include/asm/io_trapped.h | 59 -
arch/sh/include/asm/irq.h | 58 -
arch/sh/include/asm/irqflags.h | 10 -
arch/sh/include/asm/kdebug.h | 19 -
arch/sh/include/asm/kexec.h | 72 -
arch/sh/include/asm/kgdb.h | 38 -
arch/sh/include/asm/kprobes.h | 57 -
arch/sh/include/asm/linkage.h | 8 -
arch/sh/include/asm/machvec.h | 41 -
arch/sh/include/asm/mmiowb.h | 12 -
arch/sh/include/asm/mmu.h | 107 --
arch/sh/include/asm/mmu_context.h | 178 --
arch/sh/include/asm/mmu_context_32.h | 51 -
arch/sh/include/asm/mmzone.h | 45 -
arch/sh/include/asm/module.h | 14 -
arch/sh/include/asm/page.h | 186 --
arch/sh/include/asm/pci.h | 91 -
arch/sh/include/asm/perf_event.h | 30 -
arch/sh/include/asm/pgalloc.h | 40 -
arch/sh/include/asm/pgtable-2level.h | 24 -
arch/sh/include/asm/pgtable-3level.h | 59 -
arch/sh/include/asm/pgtable.h | 150 --
arch/sh/include/asm/pgtable_32.h | 462 -----
arch/sh/include/asm/platform_early.h | 61 -
arch/sh/include/asm/posix_types.h | 2 -
arch/sh/include/asm/processor.h | 173 --
arch/sh/include/asm/processor_32.h | 202 ---
arch/sh/include/asm/ptrace.h | 139 --
arch/sh/include/asm/ptrace_32.h | 14 -
arch/sh/include/asm/push-switch.h | 32 -
arch/sh/include/asm/reboot.h | 22 -
arch/sh/include/asm/romimage-macros.h | 74 -
arch/sh/include/asm/rtc.h | 15 -
arch/sh/include/asm/seccomp.h | 21 -
arch/sh/include/asm/sections.h | 12 -
arch/sh/include/asm/setup.h | 25 -
arch/sh/include/asm/sfp-machine.h | 80 -
arch/sh/include/asm/sh7760fb.h | 198 --
arch/sh/include/asm/sh_bios.h | 28 -
arch/sh/include/asm/shmparam.h | 19 -
arch/sh/include/asm/siu.h | 20 -
arch/sh/include/asm/smc37c93x.h | 191 --
arch/sh/include/asm/smp-ops.h | 52 -
arch/sh/include/asm/smp.h | 83 -
arch/sh/include/asm/sparsemem.h | 12 -
arch/sh/include/asm/spi.h | 14 -
arch/sh/include/asm/spinlock-cas.h | 89 -
arch/sh/include/asm/spinlock-llsc.h | 198 --
arch/sh/include/asm/spinlock.h | 19 -
arch/sh/include/asm/spinlock_types.h | 22 -
arch/sh/include/asm/sram.h | 39 -
arch/sh/include/asm/stackprotector.h | 21 -
arch/sh/include/asm/stacktrace.h | 21 -
arch/sh/include/asm/string.h | 2 -
arch/sh/include/asm/string_32.h | 102 --
arch/sh/include/asm/suspend.h | 97 -
arch/sh/include/asm/switch_to.h | 7 -
arch/sh/include/asm/switch_to_32.h | 131 --
arch/sh/include/asm/syscall.h | 9 -
arch/sh/include/asm/syscall_32.h | 69 -
arch/sh/include/asm/syscalls.h | 14 -
arch/sh/include/asm/syscalls_32.h | 27 -
arch/sh/include/asm/thread_info.h | 171 --
arch/sh/include/asm/timex.h | 24 -
arch/sh/include/asm/tlb.h | 29 -
arch/sh/include/asm/tlbflush.h | 52 -
arch/sh/include/asm/topology.h | 28 -
arch/sh/include/asm/traps.h | 18 -
arch/sh/include/asm/traps_32.h | 61 -
arch/sh/include/asm/types.h | 16 -
arch/sh/include/asm/uaccess.h | 133 --
arch/sh/include/asm/uaccess_32.h | 227 ---
arch/sh/include/asm/uncached.h | 59 -
arch/sh/include/asm/unistd.h | 31 -
arch/sh/include/asm/unwinder.h | 32 -
arch/sh/include/asm/user.h | 55 -
arch/sh/include/asm/vermagic.h | 30 -
arch/sh/include/asm/vga.h | 7 -
arch/sh/include/asm/vmalloc.h | 4 -
arch/sh/include/asm/vmlinux.lds.h | 18 -
arch/sh/include/asm/watchdog.h | 159 --
arch/sh/include/asm/word-at-a-time.h | 54 -
arch/sh/include/cpu-common/cpu/addrspace.h | 16 -
arch/sh/include/cpu-common/cpu/mmu_context.h | 13 -
arch/sh/include/cpu-common/cpu/pfc.h | 18 -
arch/sh/include/cpu-common/cpu/rtc.h | 9 -
arch/sh/include/cpu-common/cpu/sigcontext.h | 18 -
arch/sh/include/cpu-common/cpu/timer.h | 7 -
arch/sh/include/cpu-sh2/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2/cpu/freq.h | 15 -
arch/sh/include/cpu-sh2/cpu/watchdog.h | 66 -
arch/sh/include/cpu-sh2a/cpu/addrspace.h | 11 -
arch/sh/include/cpu-sh2a/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2a/cpu/freq.h | 13 -
arch/sh/include/cpu-sh2a/cpu/rtc.h | 9 -
arch/sh/include/cpu-sh2a/cpu/sh7203.h | 144 --
arch/sh/include/cpu-sh2a/cpu/sh7264.h | 169 --
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 213 ---
arch/sh/include/cpu-sh2a/cpu/watchdog.h | 2 -
arch/sh/include/cpu-sh3/cpu/adc.h | 29 -
arch/sh/include/cpu-sh3/cpu/cache.h | 40 -
arch/sh/include/cpu-sh3/cpu/dac.h | 42 -
arch/sh/include/cpu-sh3/cpu/dma-register.h | 38 -
arch/sh/include/cpu-sh3/cpu/dma.h | 19 -
arch/sh/include/cpu-sh3/cpu/freq.h | 24 -
arch/sh/include/cpu-sh3/cpu/gpio.h | 78 -
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 42 -
arch/sh/include/cpu-sh3/cpu/serial.h | 11 -
arch/sh/include/cpu-sh3/cpu/sh7720.h | 175 --
arch/sh/include/cpu-sh3/cpu/watchdog.h | 22 -
arch/sh/include/cpu-sh4/cpu/addrspace.h | 41 -
arch/sh/include/cpu-sh4/cpu/cache.h | 41 -
arch/sh/include/cpu-sh4/cpu/dma-register.h | 98 -
arch/sh/include/cpu-sh4/cpu/dma.h | 18 -
arch/sh/include/cpu-sh4/cpu/fpu.h | 30 -
arch/sh/include/cpu-sh4/cpu/freq.h | 74 -
arch/sh/include/cpu-sh4/cpu/mmu_context.h | 79 -
arch/sh/include/cpu-sh4/cpu/rtc.h | 14 -
arch/sh/include/cpu-sh4/cpu/sh7722.h | 252 ---
arch/sh/include/cpu-sh4/cpu/sh7723.h | 285 ---
arch/sh/include/cpu-sh4/cpu/sh7724.h | 319 ----
arch/sh/include/cpu-sh4/cpu/sh7734.h | 307 ----
arch/sh/include/cpu-sh4/cpu/sh7757.h | 290 ---
arch/sh/include/cpu-sh4/cpu/sh7785.h | 260 ---
arch/sh/include/cpu-sh4/cpu/sh7786.h | 138 --
arch/sh/include/cpu-sh4/cpu/shx3.h | 65 -
arch/sh/include/cpu-sh4/cpu/sigcontext.h | 25 -
arch/sh/include/cpu-sh4/cpu/sq.h | 33 -
arch/sh/include/cpu-sh4/cpu/watchdog.h | 41 -
arch/sh/include/cpu-sh4a/cpu/dma.h | 72 -
arch/sh/include/cpu-sh4a/cpu/serial.h | 8 -
arch/sh/include/mach-common/mach/highlander.h | 208 ---
arch/sh/include/mach-common/mach/hp6xx.h | 59 -
arch/sh/include/mach-common/mach/lboxre2.h | 24 -
.../include/mach-common/mach/magicpanelr2.h | 64 -
.../sh/include/mach-common/mach/mangle-port.h | 46 -
arch/sh/include/mach-common/mach/microdev.h | 69 -
arch/sh/include/mach-common/mach/r2d.h | 71 -
arch/sh/include/mach-common/mach/romimage.h | 12 -
arch/sh/include/mach-common/mach/sdk7780.h | 79 -
.../include/mach-common/mach/secureedge5410.h | 47 -
arch/sh/include/mach-common/mach/sh2007.h | 118 --
arch/sh/include/mach-common/mach/sh7763rdp.h | 50 -
arch/sh/include/mach-common/mach/sh7785lcr.h | 58 -
arch/sh/include/mach-common/mach/shmin.h | 10 -
arch/sh/include/mach-common/mach/titan.h | 20 -
arch/sh/include/mach-common/mach/urquell.h | 69 -
arch/sh/include/mach-dreamcast/mach/dma.h | 29 -
arch/sh/include/mach-dreamcast/mach/maple.h | 38 -
arch/sh/include/mach-dreamcast/mach/pci.h | 24 -
arch/sh/include/mach-dreamcast/mach/sysasic.h | 46 -
.../mach-ecovec24/mach/partner-jet-setup.txt | 82 -
arch/sh/include/mach-ecovec24/mach/romimage.h | 48 -
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 24 -
.../mach-kfr2r09/mach/partner-jet-setup.txt | 144 --
arch/sh/include/mach-kfr2r09/mach/romimage.h | 31 -
arch/sh/include/mach-landisk/mach/gio.h | 38 -
.../mach-landisk/mach/iodata_landisk.h | 46 -
arch/sh/include/mach-migor/mach/migor.h | 16 -
arch/sh/include/mach-sdk7786/mach/fpga.h | 156 --
arch/sh/include/mach-sdk7786/mach/irq.h | 8 -
arch/sh/include/mach-se/mach/mrshpc.h | 53 -
arch/sh/include/mach-se/mach/se.h | 120 --
arch/sh/include/mach-se/mach/se7206.h | 14 -
arch/sh/include/mach-se/mach/se7343.h | 143 --
arch/sh/include/mach-se/mach/se7721.h | 68 -
arch/sh/include/mach-se/mach/se7722.h | 98 -
arch/sh/include/mach-se/mach/se7724.h | 69 -
arch/sh/include/mach-se/mach/se7751.h | 75 -
arch/sh/include/mach-se/mach/se7780.h | 106 --
arch/sh/include/mach-sh03/mach/io.h | 26 -
arch/sh/include/mach-sh03/mach/sh03.h | 19 -
arch/sh/include/mach-x3proto/mach/hardware.h | 13 -
arch/sh/include/mach-x3proto/mach/ilsel.h | 46 -
arch/sh/include/uapi/asm/Kbuild | 4 -
arch/sh/include/uapi/asm/auxvec.h | 39 -
arch/sh/include/uapi/asm/byteorder.h | 11 -
arch/sh/include/uapi/asm/cachectl.h | 20 -
arch/sh/include/uapi/asm/cpu-features.h | 28 -
arch/sh/include/uapi/asm/hw_breakpoint.h | 5 -
arch/sh/include/uapi/asm/ioctls.h | 116 --
arch/sh/include/uapi/asm/posix_types.h | 2 -
arch/sh/include/uapi/asm/posix_types_32.h | 23 -
arch/sh/include/uapi/asm/ptrace.h | 30 -
arch/sh/include/uapi/asm/ptrace_32.h | 78 -
arch/sh/include/uapi/asm/sigcontext.h | 25 -
arch/sh/include/uapi/asm/signal.h | 18 -
arch/sh/include/uapi/asm/sockios.h | 18 -
arch/sh/include/uapi/asm/stat.h | 78 -
arch/sh/include/uapi/asm/swab.h | 50 -
arch/sh/include/uapi/asm/unistd.h | 2 -
arch/sh/kernel/.gitignore | 2 -
arch/sh/kernel/Makefile | 49 -
arch/sh/kernel/asm-offsets.c | 60 -
arch/sh/kernel/cpu/Makefile | 21 -
arch/sh/kernel/cpu/adc.c | 37 -
arch/sh/kernel/cpu/clock-cpg.c | 78 -
arch/sh/kernel/cpu/clock.c | 52 -
arch/sh/kernel/cpu/fpu.c | 92 -
arch/sh/kernel/cpu/init.c | 366 ----
arch/sh/kernel/cpu/irq/Makefile | 6 -
arch/sh/kernel/cpu/irq/imask.c | 85 -
arch/sh/kernel/cpu/irq/ipr.c | 80 -
arch/sh/kernel/cpu/pfc.c | 25 -
arch/sh/kernel/cpu/proc.c | 151 --
arch/sh/kernel/cpu/sh2/Makefile | 12 -
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74 -
arch/sh/kernel/cpu/sh2/entry.S | 373 ----
arch/sh/kernel/cpu/sh2/ex.S | 44 -
arch/sh/kernel/cpu/sh2/probe.c | 71 -
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 ---
arch/sh/kernel/cpu/sh2/smp-j2.c | 136 --
arch/sh/kernel/cpu/sh2a/Makefile | 25 -
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 82 -
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 78 -
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 80 -
arch/sh/kernel/cpu/sh2a/clock-sh7264.c | 157 --
arch/sh/kernel/cpu/sh2a/clock-sh7269.c | 181 --
arch/sh/kernel/cpu/sh2a/entry.S | 247 ---
arch/sh/kernel/cpu/sh2a/ex.S | 70 -
arch/sh/kernel/cpu/sh2a/fpu.c | 572 ------
arch/sh/kernel/cpu/sh2a/opcode_helper.c | 51 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 28 -
arch/sh/kernel/cpu/sh2a/probe.c | 57 -
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 175 --
arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 418 -----
arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 355 ----
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 291 ---
arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 552 ------
arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 568 ------
arch/sh/kernel/cpu/sh3/Makefile | 34 -
arch/sh/kernel/cpu/sh3/clock-sh3.c | 86 -
arch/sh/kernel/cpu/sh3/clock-sh7705.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7706.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 82 -
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 75 -
arch/sh/kernel/cpu/sh3/clock-sh7712.c | 68 -
arch/sh/kernel/cpu/sh3/entry.S | 509 ------
arch/sh/kernel/cpu/sh3/ex.S | 56 -
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 27 -
arch/sh/kernel/cpu/sh3/probe.c | 108 --
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 34 -
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 21 -
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 38 -
arch/sh/kernel/cpu/sh3/setup-sh3.c | 69 -
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 190 --
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 246 ---
arch/sh/kernel/cpu/sh3/setup-sh7710.c | 189 --
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 286 ---
arch/sh/kernel/cpu/sh3/swsusp.S | 144 --
arch/sh/kernel/cpu/sh4/Makefile | 37 -
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174 --
arch/sh/kernel/cpu/sh4/clock-sh4.c | 77 -
arch/sh/kernel/cpu/sh4/fpu.c | 425 -----
arch/sh/kernel/cpu/sh4/perf_event.c | 265 ---
arch/sh/kernel/cpu/sh4/probe.c | 260 ---
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139 --
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 359 ----
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 297 ---
arch/sh/kernel/cpu/sh4/softfloat.c | 930 ----------
arch/sh/kernel/cpu/sh4/sq.c | 414 -----
arch/sh/kernel/cpu/sh4a/Makefile | 53 -
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 277 ---
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 270 ---
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 253 ---
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 301 ----
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 367 ----
arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 256 ---
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 152 --
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 116 --
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 70 -
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 122 --
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 174 --
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 189 --
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 148 --
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 31 -
arch/sh/kernel/cpu/sh4a/perf_event.c | 299 ---
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 21 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 26 -
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 24 -
arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 444 -----
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 388 ----
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 666 -------
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 644 -------
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 1288 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 621 -------
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 1242 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 455 -----
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 571 ------
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 505 ------
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 608 -------
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 841 ---------
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 396 ----
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 146 --
arch/sh/kernel/cpu/sh4a/ubc.c | 130 --
arch/sh/kernel/cpu/shmobile/Makefile | 8 -
arch/sh/kernel/cpu/shmobile/cpuidle.c | 95 -
arch/sh/kernel/cpu/shmobile/pm.c | 153 --
arch/sh/kernel/cpu/shmobile/sleep.S | 402 -----
arch/sh/kernel/crash_dump.c | 27 -
arch/sh/kernel/debugtraps.S | 38 -
arch/sh/kernel/disassemble.c | 572 ------
arch/sh/kernel/dma-coherent.c | 33 -
arch/sh/kernel/dumpstack.c | 156 --
arch/sh/kernel/dwarf.c | 1206 -------------
arch/sh/kernel/entry-common.S | 400 ----
arch/sh/kernel/ftrace.c | 365 ----
arch/sh/kernel/head_32.S | 365 ----
arch/sh/kernel/hw_breakpoint.c | 408 -----
arch/sh/kernel/idle.c | 57 -
arch/sh/kernel/io.c | 111 --
arch/sh/kernel/io_trapped.c | 291 ---
arch/sh/kernel/iomap.c | 162 --
arch/sh/kernel/ioport.c | 41 -
arch/sh/kernel/irq.c | 249 ---
arch/sh/kernel/irq_32.c | 54 -
arch/sh/kernel/kdebugfs.c | 14 -
arch/sh/kernel/kgdb.c | 378 ----
arch/sh/kernel/kprobes.c | 452 -----
arch/sh/kernel/machine_kexec.c | 204 ---
arch/sh/kernel/machvec.c | 122 --
arch/sh/kernel/module.c | 104 --
arch/sh/kernel/nmi_debug.c | 75 -
arch/sh/kernel/perf_callchain.c | 32 -
arch/sh/kernel/perf_event.c | 363 ----
arch/sh/kernel/process.c | 77 -
arch/sh/kernel/process_32.c | 197 --
arch/sh/kernel/ptrace.c | 34 -
arch/sh/kernel/ptrace_32.c | 487 -----
arch/sh/kernel/reboot.c | 96 -
arch/sh/kernel/relocate_kernel.S | 230 ---
arch/sh/kernel/return_address.c | 56 -
arch/sh/kernel/setup.c | 356 ----
arch/sh/kernel/sh_bios.c | 169 --
arch/sh/kernel/sh_ksyms_32.c | 118 --
arch/sh/kernel/signal_32.c | 507 ------
arch/sh/kernel/smp.c | 471 -----
arch/sh/kernel/stacktrace.c | 79 -
arch/sh/kernel/swsusp.c | 35 -
arch/sh/kernel/sys_sh.c | 96 -
arch/sh/kernel/sys_sh32.c | 61 -
arch/sh/kernel/syscalls/Makefile | 32 -
arch/sh/kernel/syscalls/syscall.tbl | 455 -----
arch/sh/kernel/syscalls_32.S | 17 -
arch/sh/kernel/time.c | 45 -
arch/sh/kernel/topology.c | 74 -
arch/sh/kernel/traps.c | 204 ---
arch/sh/kernel/traps_32.c | 795 --------
arch/sh/kernel/unwinder.c | 165 --
arch/sh/kernel/vmlinux.lds.S | 82 -
arch/sh/kernel/vsyscall/.gitignore | 2 -
arch/sh/kernel/vsyscall/Makefile | 36 -
arch/sh/kernel/vsyscall/vsyscall-note.S | 26 -
arch/sh/kernel/vsyscall/vsyscall-sigreturn.S | 75 -
arch/sh/kernel/vsyscall/vsyscall-syscall.S | 11 -
arch/sh/kernel/vsyscall/vsyscall-trapa.S | 40 -
arch/sh/kernel/vsyscall/vsyscall.c | 93 -
arch/sh/kernel/vsyscall/vsyscall.lds.S | 85 -
arch/sh/lib/Makefile | 32 -
arch/sh/lib/__clear_user.S | 109 --
arch/sh/lib/ashiftrt.S | 128 --
arch/sh/lib/ashldi3.c | 30 -
arch/sh/lib/ashlsi3.S | 189 --
arch/sh/lib/ashrdi3.c | 32 -
arch/sh/lib/ashrsi3.S | 179 --
arch/sh/lib/checksum.S | 365 ----
arch/sh/lib/copy_page.S | 390 ----
arch/sh/lib/delay.c | 54 -
arch/sh/lib/div64-generic.c | 20 -
arch/sh/lib/div64.S | 47 -
arch/sh/lib/io.c | 79 -
arch/sh/lib/libgcc.h | 27 -
arch/sh/lib/lshrdi3.c | 30 -
arch/sh/lib/lshrsi3.S | 188 --
arch/sh/lib/mcount.S | 287 ---
arch/sh/lib/memchr.S | 27 -
arch/sh/lib/memcpy-sh4.S | 800 --------
arch/sh/lib/memcpy.S | 228 ---
arch/sh/lib/memmove.S | 255 ---
arch/sh/lib/memset-sh4.S | 108 --
arch/sh/lib/memset.S | 59 -
arch/sh/lib/movmem.S | 217 ---
arch/sh/lib/strlen.S | 71 -
arch/sh/lib/udiv_qrnnd.S | 60 -
arch/sh/lib/udivsi3.S | 66 -
arch/sh/lib/udivsi3_i4i-Os.S | 128 --
arch/sh/lib/udivsi3_i4i.S | 645 -------
arch/sh/math-emu/Makefile | 2 -
arch/sh/math-emu/math.c | 506 ------
arch/sh/math-emu/sfp-util.h | 73 -
arch/sh/mm/Kconfig | 254 ---
arch/sh/mm/Makefile | 45 -
arch/sh/mm/alignment.c | 189 --
arch/sh/mm/asids-debugfs.c | 59 -
arch/sh/mm/cache-debugfs.c | 109 --
arch/sh/mm/cache-j2.c | 64 -
arch/sh/mm/cache-sh2.c | 90 -
arch/sh/mm/cache-sh2a.c | 188 --
arch/sh/mm/cache-sh3.c | 102 --
arch/sh/mm/cache-sh4.c | 390 ----
arch/sh/mm/cache-sh7705.c | 194 --
arch/sh/mm/cache-shx3.c | 44 -
arch/sh/mm/cache.c | 360 ----
arch/sh/mm/consistent.c | 65 -
arch/sh/mm/extable_32.c | 24 -
arch/sh/mm/fault.c | 504 ------
arch/sh/mm/flush-sh4.c | 111 --
arch/sh/mm/hugetlbpage.c | 82 -
arch/sh/mm/init.c | 424 -----
arch/sh/mm/ioremap.c | 192 --
arch/sh/mm/ioremap.h | 23 -
arch/sh/mm/ioremap_fixed.c | 135 --
arch/sh/mm/kmap.c | 65 -
arch/sh/mm/mmap.c | 184 --
arch/sh/mm/nommu.c | 98 -
arch/sh/mm/numa.c | 56 -
arch/sh/mm/pgtable.c | 57 -
arch/sh/mm/pmb.c | 887 ---------
arch/sh/mm/sram.c | 35 -
arch/sh/mm/tlb-debugfs.c | 160 --
arch/sh/mm/tlb-pteaex.c | 106 --
arch/sh/mm/tlb-sh3.c | 95 -
arch/sh/mm/tlb-sh4.c | 108 --
arch/sh/mm/tlb-urb.c | 93 -
arch/sh/mm/tlbex_32.c | 82 -
arch/sh/mm/tlbflush_32.c | 137 --
arch/sh/mm/uncached.c | 44 -
arch/sh/tools/Makefile | 16 -
arch/sh/tools/gen-mach-types | 48 -
arch/sh/tools/mach-types | 67 -
drivers/clocksource/sh_cmt.c | 8 -
drivers/clocksource/sh_mtu2.c | 8 -
drivers/clocksource/sh_tmu.c | 8 -
drivers/i2c/busses/Kconfig | 4 +-
drivers/media/platform/renesas/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 6 +-
drivers/mmc/host/sh_mmcif.c | 21 +-
drivers/net/ethernet/8390/Kconfig | 2 +-
drivers/net/ethernet/renesas/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 4 +-
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-sh.c | 18 +-
drivers/spi/Kconfig | 4 +-
drivers/tty/serial/Kconfig | 3 +-
drivers/tty/serial/sh-sci.c | 57 -
drivers/tty/vt/keyboard.c | 2 +-
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/video/console/Kconfig | 2 +-
drivers/video/logo/Kconfig | 15 -
drivers/video/logo/Makefile | 3 -
drivers/video/logo/logo.c | 12 -
drivers/video/logo/logo_superh_clut224.ppm | 1604 -----------------
drivers/video/logo/logo_superh_vga16.ppm | 1604 -----------------
fs/Kconfig.binfmt | 2 +-
fs/minix/Kconfig | 2 +-
include/linux/cpuhotplug.h | 1 -
include/linux/sh_intc.h | 4 -
init/Kconfig | 2 +-
kernel/sysctl.c | 3 +-
lib/Kconfig.debug | 2 +-
lib/math/div64.c | 4 +-
lib/test_user_copy.c | 3 +-
scripts/coccinelle/misc/cond_no_effect.cocci | 13 +-
scripts/head-object-list.txt | 1 -
sound/soc/sh/Kconfig | 4 +-
tools/include/asm/barrier.h | 2 -
tools/perf/util/dwarf-regs.c | 1 -
785 files changed, 36 insertions(+), 97715 deletions(-)
delete mode 100644 Documentation/sh/booting.rst
delete mode 100644 Documentation/sh/features.rst
delete mode 100644 Documentation/sh/index.rst
delete mode 100644 Documentation/sh/new-machine.rst
delete mode 100644 Documentation/sh/register-banks.rst
delete mode 100644 arch/sh/Kbuild
delete mode 100644 arch/sh/Kconfig
delete mode 100644 arch/sh/Kconfig.cpu
delete mode 100644 arch/sh/Kconfig.debug
delete mode 100644 arch/sh/Makefile
delete mode 100644 arch/sh/boards/Kconfig
delete mode 100644 arch/sh/boards/Makefile
delete mode 100644 arch/sh/boards/board-apsh4a3a.c
delete mode 100644 arch/sh/boards/board-apsh4ad0a.c
delete mode 100644 arch/sh/boards/board-edosk7705.c
delete mode 100644 arch/sh/boards/board-edosk7760.c
delete mode 100644 arch/sh/boards/board-espt.c
delete mode 100644 arch/sh/boards/board-magicpanelr2.c
delete mode 100644 arch/sh/boards/board-polaris.c
delete mode 100644 arch/sh/boards/board-secureedge5410.c
delete mode 100644 arch/sh/boards/board-sh2007.c
delete mode 100644 arch/sh/boards/board-sh7757lcr.c
delete mode 100644 arch/sh/boards/board-sh7785lcr.c
delete mode 100644 arch/sh/boards/board-shmin.c
delete mode 100644 arch/sh/boards/board-titan.c
delete mode 100644 arch/sh/boards/board-urquell.c
delete mode 100644 arch/sh/boards/mach-ap325rxa/Makefile
delete mode 100644 arch/sh/boards/mach-ap325rxa/sdram.S
delete mode 100644 arch/sh/boards/mach-ap325rxa/setup.c
delete mode 100644 arch/sh/boards/mach-dreamcast/Makefile
delete mode 100644 arch/sh/boards/mach-dreamcast/irq.c
delete mode 100644 arch/sh/boards/mach-dreamcast/rtc.c
delete mode 100644 arch/sh/boards/mach-dreamcast/setup.c
delete mode 100644 arch/sh/boards/mach-ecovec24/Makefile
delete mode 100644 arch/sh/boards/mach-ecovec24/sdram.S
delete mode 100644 arch/sh/boards/mach-ecovec24/setup.c
delete mode 100644 arch/sh/boards/mach-highlander/Kconfig
delete mode 100644 arch/sh/boards/mach-highlander/Makefile
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780mp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780rp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/pinmux-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/psw.c
delete mode 100644 arch/sh/boards/mach-highlander/setup.c
delete mode 100644 arch/sh/boards/mach-hp6xx/Makefile
delete mode 100644 arch/sh/boards/mach-hp6xx/hp6xx_apm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm_wakeup.S
delete mode 100644 arch/sh/boards/mach-hp6xx/setup.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/Makefile
delete mode 100644 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/sdram.S
delete mode 100644 arch/sh/boards/mach-kfr2r09/setup.c
delete mode 100644 arch/sh/boards/mach-landisk/Makefile
delete mode 100644 arch/sh/boards/mach-landisk/gio.c
delete mode 100644 arch/sh/boards/mach-landisk/irq.c
delete mode 100644 arch/sh/boards/mach-landisk/psw.c
delete mode 100644 arch/sh/boards/mach-landisk/setup.c
delete mode 100644 arch/sh/boards/mach-lboxre2/Makefile
delete mode 100644 arch/sh/boards/mach-lboxre2/irq.c
delete mode 100644 arch/sh/boards/mach-lboxre2/setup.c
delete mode 100644 arch/sh/boards/mach-microdev/Makefile
delete mode 100644 arch/sh/boards/mach-microdev/fdc37c93xapm.c
delete mode 100644 arch/sh/boards/mach-microdev/io.c
delete mode 100644 arch/sh/boards/mach-microdev/irq.c
delete mode 100644 arch/sh/boards/mach-microdev/setup.c
delete mode 100644 arch/sh/boards/mach-migor/Kconfig
delete mode 100644 arch/sh/boards/mach-migor/Makefile
delete mode 100644 arch/sh/boards/mach-migor/lcd_qvga.c
delete mode 100644 arch/sh/boards/mach-migor/sdram.S
delete mode 100644 arch/sh/boards/mach-migor/setup.c
delete mode 100644 arch/sh/boards/mach-r2d/Kconfig
delete mode 100644 arch/sh/boards/mach-r2d/Makefile
delete mode 100644 arch/sh/boards/mach-r2d/irq.c
delete mode 100644 arch/sh/boards/mach-r2d/setup.c
delete mode 100644 arch/sh/boards/mach-rsk/Kconfig
delete mode 100644 arch/sh/boards/mach-rsk/Makefile
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7203.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7264.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7269.c
delete mode 100644 arch/sh/boards/mach-rsk/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7780/Kconfig
delete mode 100644 arch/sh/boards/mach-sdk7780/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7780/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7780/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7786/fpga.c
delete mode 100644 arch/sh/boards/mach-sdk7786/gpio.c
delete mode 100644 arch/sh/boards/mach-sdk7786/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7786/nmi.c
delete mode 100644 arch/sh/boards/mach-sdk7786/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/sram.c
delete mode 100644 arch/sh/boards/mach-se/7206/Makefile
delete mode 100644 arch/sh/boards/mach-se/7206/irq.c
delete mode 100644 arch/sh/boards/mach-se/7206/setup.c
delete mode 100644 arch/sh/boards/mach-se/7343/Makefile
delete mode 100644 arch/sh/boards/mach-se/7343/irq.c
delete mode 100644 arch/sh/boards/mach-se/7343/setup.c
delete mode 100644 arch/sh/boards/mach-se/770x/Makefile
delete mode 100644 arch/sh/boards/mach-se/770x/irq.c
delete mode 100644 arch/sh/boards/mach-se/770x/setup.c
delete mode 100644 arch/sh/boards/mach-se/7721/Makefile
delete mode 100644 arch/sh/boards/mach-se/7721/irq.c
delete mode 100644 arch/sh/boards/mach-se/7721/setup.c
delete mode 100644 arch/sh/boards/mach-se/7722/Makefile
delete mode 100644 arch/sh/boards/mach-se/7722/irq.c
delete mode 100644 arch/sh/boards/mach-se/7722/setup.c
delete mode 100644 arch/sh/boards/mach-se/7724/Makefile
delete mode 100644 arch/sh/boards/mach-se/7724/irq.c
delete mode 100644 arch/sh/boards/mach-se/7724/sdram.S
delete mode 100644 arch/sh/boards/mach-se/7724/setup.c
delete mode 100644 arch/sh/boards/mach-se/7751/Makefile
delete mode 100644 arch/sh/boards/mach-se/7751/irq.c
delete mode 100644 arch/sh/boards/mach-se/7751/setup.c
delete mode 100644 arch/sh/boards/mach-se/7780/Makefile
delete mode 100644 arch/sh/boards/mach-se/7780/irq.c
delete mode 100644 arch/sh/boards/mach-se/7780/setup.c
delete mode 100644 arch/sh/boards/mach-se/Makefile
delete mode 100644 arch/sh/boards/mach-se/board-se7619.c
delete mode 100644 arch/sh/boards/mach-sh03/Makefile
delete mode 100644 arch/sh/boards/mach-sh03/rtc.c
delete mode 100644 arch/sh/boards/mach-sh03/setup.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/Makefile
delete mode 100644 arch/sh/boards/mach-sh7763rdp/irq.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/setup.c
delete mode 100644 arch/sh/boards/mach-x3proto/Makefile
delete mode 100644 arch/sh/boards/mach-x3proto/gpio.c
delete mode 100644 arch/sh/boards/mach-x3proto/ilsel.c
delete mode 100644 arch/sh/boards/mach-x3proto/setup.c
delete mode 100644 arch/sh/boards/of-generic.c
delete mode 100644 arch/sh/boot/.gitignore
delete mode 100644 arch/sh/boot/Makefile
delete mode 100644 arch/sh/boot/compressed/.gitignore
delete mode 100644 arch/sh/boot/compressed/Makefile
delete mode 100644 arch/sh/boot/compressed/ashiftrt.S
delete mode 100644 arch/sh/boot/compressed/ashldi3.c
delete mode 100644 arch/sh/boot/compressed/ashlsi3.S
delete mode 100644 arch/sh/boot/compressed/ashrsi3.S
delete mode 100644 arch/sh/boot/compressed/cache.c
delete mode 100644 arch/sh/boot/compressed/head_32.S
delete mode 100644 arch/sh/boot/compressed/head_64.S
delete mode 100644 arch/sh/boot/compressed/lshrsi3.S
delete mode 100644 arch/sh/boot/compressed/misc.c
delete mode 100644 arch/sh/boot/compressed/vmlinux.scr
delete mode 100644 arch/sh/boot/dts/Makefile
delete mode 100644 arch/sh/boot/dts/j2_mimas_v2.dts
delete mode 100644 arch/sh/boot/romimage/Makefile
delete mode 100644 arch/sh/boot/romimage/head.S
delete mode 100644 arch/sh/boot/romimage/mmcif-sh7724.c
delete mode 100644 arch/sh/boot/romimage/vmlinux.scr
delete mode 100644 arch/sh/cchips/Kconfig
delete mode 100644 arch/sh/cchips/hd6446x/Makefile
delete mode 100644 arch/sh/cchips/hd6446x/hd64461.c
delete mode 100644 arch/sh/configs/ap325rxa_defconfig
delete mode 100644 arch/sh/configs/apsh4a3a_defconfig
delete mode 100644 arch/sh/configs/apsh4ad0a_defconfig
delete mode 100644 arch/sh/configs/dreamcast_defconfig
delete mode 100644 arch/sh/configs/ecovec24-romimage_defconfig
delete mode 100644 arch/sh/configs/ecovec24_defconfig
delete mode 100644 arch/sh/configs/edosk7705_defconfig
delete mode 100644 arch/sh/configs/edosk7760_defconfig
delete mode 100644 arch/sh/configs/espt_defconfig
delete mode 100644 arch/sh/configs/hp6xx_defconfig
delete mode 100644 arch/sh/configs/j2_defconfig
delete mode 100644 arch/sh/configs/kfr2r09-romimage_defconfig
delete mode 100644 arch/sh/configs/kfr2r09_defconfig
delete mode 100644 arch/sh/configs/landisk_defconfig
delete mode 100644 arch/sh/configs/lboxre2_defconfig
delete mode 100644 arch/sh/configs/magicpanelr2_defconfig
delete mode 100644 arch/sh/configs/microdev_defconfig
delete mode 100644 arch/sh/configs/migor_defconfig
delete mode 100644 arch/sh/configs/polaris_defconfig
delete mode 100644 arch/sh/configs/r7780mp_defconfig
delete mode 100644 arch/sh/configs/r7785rp_defconfig
delete mode 100644 arch/sh/configs/rsk7201_defconfig
delete mode 100644 arch/sh/configs/rsk7203_defconfig
delete mode 100644 arch/sh/configs/rsk7264_defconfig
delete mode 100644 arch/sh/configs/rsk7269_defconfig
delete mode 100644 arch/sh/configs/rts7751r2d1_defconfig
delete mode 100644 arch/sh/configs/rts7751r2dplus_defconfig
delete mode 100644 arch/sh/configs/sdk7780_defconfig
delete mode 100644 arch/sh/configs/sdk7786_defconfig
delete mode 100644 arch/sh/configs/se7206_defconfig
delete mode 100644 arch/sh/configs/se7343_defconfig
delete mode 100644 arch/sh/configs/se7619_defconfig
delete mode 100644 arch/sh/configs/se7705_defconfig
delete mode 100644 arch/sh/configs/se7712_defconfig
delete mode 100644 arch/sh/configs/se7721_defconfig
delete mode 100644 arch/sh/configs/se7722_defconfig
delete mode 100644 arch/sh/configs/se7724_defconfig
delete mode 100644 arch/sh/configs/se7750_defconfig
delete mode 100644 arch/sh/configs/se7751_defconfig
delete mode 100644 arch/sh/configs/se7780_defconfig
delete mode 100644 arch/sh/configs/secureedge5410_defconfig
delete mode 100644 arch/sh/configs/sh03_defconfig
delete mode 100644 arch/sh/configs/sh2007_defconfig
delete mode 100644 arch/sh/configs/sh7710voipgw_defconfig
delete mode 100644 arch/sh/configs/sh7724_generic_defconfig
delete mode 100644 arch/sh/configs/sh7757lcr_defconfig
delete mode 100644 arch/sh/configs/sh7763rdp_defconfig
delete mode 100644 arch/sh/configs/sh7770_generic_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_32bit_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_defconfig
delete mode 100644 arch/sh/configs/shmin_defconfig
delete mode 100644 arch/sh/configs/shx3_defconfig
delete mode 100644 arch/sh/configs/titan_defconfig
delete mode 100644 arch/sh/configs/ul2_defconfig
delete mode 100644 arch/sh/configs/urquell_defconfig
delete mode 100644 arch/sh/drivers/Kconfig
delete mode 100644 arch/sh/drivers/Makefile
delete mode 100644 arch/sh/drivers/dma/Kconfig
delete mode 100644 arch/sh/drivers/dma/Makefile
delete mode 100644 arch/sh/drivers/dma/dma-api.c
delete mode 100644 arch/sh/drivers/dma/dma-g2.c
delete mode 100644 arch/sh/drivers/dma/dma-pvr2.c
delete mode 100644 arch/sh/drivers/dma/dma-sh.c
delete mode 100644 arch/sh/drivers/dma/dma-sysfs.c
delete mode 100644 arch/sh/drivers/dma/dmabrg.c
delete mode 100644 arch/sh/drivers/heartbeat.c
delete mode 100644 arch/sh/drivers/pci/Makefile
delete mode 100644 arch/sh/drivers/pci/common.c
delete mode 100644 arch/sh/drivers/pci/fixups-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/fixups-landisk.c
delete mode 100644 arch/sh/drivers/pci/fixups-r7780rp.c
delete mode 100644 arch/sh/drivers/pci/fixups-rts7751r2d.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7780.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7786.c
delete mode 100644 arch/sh/drivers/pci/fixups-se7751.c
delete mode 100644 arch/sh/drivers/pci/fixups-sh03.c
delete mode 100644 arch/sh/drivers/pci/fixups-snapgear.c
delete mode 100644 arch/sh/drivers/pci/fixups-titan.c
delete mode 100644 arch/sh/drivers/pci/ops-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/ops-sh4.c
delete mode 100644 arch/sh/drivers/pci/ops-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pci-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/pci-sh4.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.h
delete mode 100644 arch/sh/drivers/pci/pci.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.h
delete mode 100644 arch/sh/drivers/platform_early.c
delete mode 100644 arch/sh/drivers/push-switch.c
delete mode 100644 arch/sh/drivers/superhyway/Makefile
delete mode 100644 arch/sh/drivers/superhyway/ops-sh4-202.c
delete mode 100644 arch/sh/include/asm/Kbuild
delete mode 100644 arch/sh/include/asm/adc.h
delete mode 100644 arch/sh/include/asm/addrspace.h
delete mode 100644 arch/sh/include/asm/alignment.h
delete mode 100644 arch/sh/include/asm/asm-offsets.h
delete mode 100644 arch/sh/include/asm/atomic-grb.h
delete mode 100644 arch/sh/include/asm/atomic-irq.h
delete mode 100644 arch/sh/include/asm/atomic-llsc.h
delete mode 100644 arch/sh/include/asm/atomic.h
delete mode 100644 arch/sh/include/asm/barrier.h
delete mode 100644 arch/sh/include/asm/bitops-cas.h
delete mode 100644 arch/sh/include/asm/bitops-grb.h
delete mode 100644 arch/sh/include/asm/bitops-llsc.h
delete mode 100644 arch/sh/include/asm/bitops-op32.h
delete mode 100644 arch/sh/include/asm/bitops.h
delete mode 100644 arch/sh/include/asm/bl_bit.h
delete mode 100644 arch/sh/include/asm/bl_bit_32.h
delete mode 100644 arch/sh/include/asm/bug.h
delete mode 100644 arch/sh/include/asm/bugs.h
delete mode 100644 arch/sh/include/asm/cache.h
delete mode 100644 arch/sh/include/asm/cache_insns.h
delete mode 100644 arch/sh/include/asm/cache_insns_32.h
delete mode 100644 arch/sh/include/asm/cacheflush.h
delete mode 100644 arch/sh/include/asm/checksum.h
delete mode 100644 arch/sh/include/asm/checksum_32.h
delete mode 100644 arch/sh/include/asm/clock.h
delete mode 100644 arch/sh/include/asm/cmpxchg-cas.h
delete mode 100644 arch/sh/include/asm/cmpxchg-grb.h
delete mode 100644 arch/sh/include/asm/cmpxchg-irq.h
delete mode 100644 arch/sh/include/asm/cmpxchg-llsc.h
delete mode 100644 arch/sh/include/asm/cmpxchg-xchg.h
delete mode 100644 arch/sh/include/asm/cmpxchg.h
delete mode 100644 arch/sh/include/asm/device.h
delete mode 100644 arch/sh/include/asm/dma-register.h
delete mode 100644 arch/sh/include/asm/dma.h
delete mode 100644 arch/sh/include/asm/dmabrg.h
delete mode 100644 arch/sh/include/asm/dwarf.h
delete mode 100644 arch/sh/include/asm/elf.h
delete mode 100644 arch/sh/include/asm/entry-macros.S
delete mode 100644 arch/sh/include/asm/extable.h
delete mode 100644 arch/sh/include/asm/fb.h
delete mode 100644 arch/sh/include/asm/fixmap.h
delete mode 100644 arch/sh/include/asm/flat.h
delete mode 100644 arch/sh/include/asm/fpu.h
delete mode 100644 arch/sh/include/asm/freq.h
delete mode 100644 arch/sh/include/asm/ftrace.h
delete mode 100644 arch/sh/include/asm/futex-cas.h
delete mode 100644 arch/sh/include/asm/futex-irq.h
delete mode 100644 arch/sh/include/asm/futex-llsc.h
delete mode 100644 arch/sh/include/asm/futex.h
delete mode 100644 arch/sh/include/asm/gpio.h
delete mode 100644 arch/sh/include/asm/hardirq.h
delete mode 100644 arch/sh/include/asm/hd64461.h
delete mode 100644 arch/sh/include/asm/heartbeat.h
delete mode 100644 arch/sh/include/asm/hugetlb.h
delete mode 100644 arch/sh/include/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/asm/hw_irq.h
delete mode 100644 arch/sh/include/asm/i2c-sh7760.h
delete mode 100644 arch/sh/include/asm/io.h
delete mode 100644 arch/sh/include/asm/io_generic.h
delete mode 100644 arch/sh/include/asm/io_noioport.h
delete mode 100644 arch/sh/include/asm/io_trapped.h
delete mode 100644 arch/sh/include/asm/irq.h
delete mode 100644 arch/sh/include/asm/irqflags.h
delete mode 100644 arch/sh/include/asm/kdebug.h
delete mode 100644 arch/sh/include/asm/kexec.h
delete mode 100644 arch/sh/include/asm/kgdb.h
delete mode 100644 arch/sh/include/asm/kprobes.h
delete mode 100644 arch/sh/include/asm/linkage.h
delete mode 100644 arch/sh/include/asm/machvec.h
delete mode 100644 arch/sh/include/asm/mmiowb.h
delete mode 100644 arch/sh/include/asm/mmu.h
delete mode 100644 arch/sh/include/asm/mmu_context.h
delete mode 100644 arch/sh/include/asm/mmu_context_32.h
delete mode 100644 arch/sh/include/asm/mmzone.h
delete mode 100644 arch/sh/include/asm/module.h
delete mode 100644 arch/sh/include/asm/page.h
delete mode 100644 arch/sh/include/asm/pci.h
delete mode 100644 arch/sh/include/asm/perf_event.h
delete mode 100644 arch/sh/include/asm/pgalloc.h
delete mode 100644 arch/sh/include/asm/pgtable-2level.h
delete mode 100644 arch/sh/include/asm/pgtable-3level.h
delete mode 100644 arch/sh/include/asm/pgtable.h
delete mode 100644 arch/sh/include/asm/pgtable_32.h
delete mode 100644 arch/sh/include/asm/platform_early.h
delete mode 100644 arch/sh/include/asm/posix_types.h
delete mode 100644 arch/sh/include/asm/processor.h
delete mode 100644 arch/sh/include/asm/processor_32.h
delete mode 100644 arch/sh/include/asm/ptrace.h
delete mode 100644 arch/sh/include/asm/ptrace_32.h
delete mode 100644 arch/sh/include/asm/push-switch.h
delete mode 100644 arch/sh/include/asm/reboot.h
delete mode 100644 arch/sh/include/asm/romimage-macros.h
delete mode 100644 arch/sh/include/asm/rtc.h
delete mode 100644 arch/sh/include/asm/seccomp.h
delete mode 100644 arch/sh/include/asm/sections.h
delete mode 100644 arch/sh/include/asm/setup.h
delete mode 100644 arch/sh/include/asm/sfp-machine.h
delete mode 100644 arch/sh/include/asm/sh7760fb.h
delete mode 100644 arch/sh/include/asm/sh_bios.h
delete mode 100644 arch/sh/include/asm/shmparam.h
delete mode 100644 arch/sh/include/asm/siu.h
delete mode 100644 arch/sh/include/asm/smc37c93x.h
delete mode 100644 arch/sh/include/asm/smp-ops.h
delete mode 100644 arch/sh/include/asm/smp.h
delete mode 100644 arch/sh/include/asm/sparsemem.h
delete mode 100644 arch/sh/include/asm/spi.h
delete mode 100644 arch/sh/include/asm/spinlock-cas.h
delete mode 100644 arch/sh/include/asm/spinlock-llsc.h
delete mode 100644 arch/sh/include/asm/spinlock.h
delete mode 100644 arch/sh/include/asm/spinlock_types.h
delete mode 100644 arch/sh/include/asm/sram.h
delete mode 100644 arch/sh/include/asm/stackprotector.h
delete mode 100644 arch/sh/include/asm/stacktrace.h
delete mode 100644 arch/sh/include/asm/string.h
delete mode 100644 arch/sh/include/asm/string_32.h
delete mode 100644 arch/sh/include/asm/suspend.h
delete mode 100644 arch/sh/include/asm/switch_to.h
delete mode 100644 arch/sh/include/asm/switch_to_32.h
delete mode 100644 arch/sh/include/asm/syscall.h
delete mode 100644 arch/sh/include/asm/syscall_32.h
delete mode 100644 arch/sh/include/asm/syscalls.h
delete mode 100644 arch/sh/include/asm/syscalls_32.h
delete mode 100644 arch/sh/include/asm/thread_info.h
delete mode 100644 arch/sh/include/asm/timex.h
delete mode 100644 arch/sh/include/asm/tlb.h
delete mode 100644 arch/sh/include/asm/tlbflush.h
delete mode 100644 arch/sh/include/asm/topology.h
delete mode 100644 arch/sh/include/asm/traps.h
delete mode 100644 arch/sh/include/asm/traps_32.h
delete mode 100644 arch/sh/include/asm/types.h
delete mode 100644 arch/sh/include/asm/uaccess.h
delete mode 100644 arch/sh/include/asm/uaccess_32.h
delete mode 100644 arch/sh/include/asm/uncached.h
delete mode 100644 arch/sh/include/asm/unistd.h
delete mode 100644 arch/sh/include/asm/unwinder.h
delete mode 100644 arch/sh/include/asm/user.h
delete mode 100644 arch/sh/include/asm/vermagic.h
delete mode 100644 arch/sh/include/asm/vga.h
delete mode 100644 arch/sh/include/asm/vmalloc.h
delete mode 100644 arch/sh/include/asm/vmlinux.lds.h
delete mode 100644 arch/sh/include/asm/watchdog.h
delete mode 100644 arch/sh/include/asm/word-at-a-time.h
delete mode 100644 arch/sh/include/cpu-common/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-common/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-common/cpu/timer.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7203.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7264.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7269.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/adc.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dac.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/gpio.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/serial.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/sh7720.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/fpu.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7722.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7723.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7724.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7734.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7757.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7785.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7786.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/shx3.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/serial.h
delete mode 100644 arch/sh/include/mach-common/mach/highlander.h
delete mode 100644 arch/sh/include/mach-common/mach/hp6xx.h
delete mode 100644 arch/sh/include/mach-common/mach/lboxre2.h
delete mode 100644 arch/sh/include/mach-common/mach/magicpanelr2.h
delete mode 100644 arch/sh/include/mach-common/mach/mangle-port.h
delete mode 100644 arch/sh/include/mach-common/mach/microdev.h
delete mode 100644 arch/sh/include/mach-common/mach/r2d.h
delete mode 100644 arch/sh/include/mach-common/mach/romimage.h
delete mode 100644 arch/sh/include/mach-common/mach/sdk7780.h
delete mode 100644 arch/sh/include/mach-common/mach/secureedge5410.h
delete mode 100644 arch/sh/include/mach-common/mach/sh2007.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7763rdp.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7785lcr.h
delete mode 100644 arch/sh/include/mach-common/mach/shmin.h
delete mode 100644 arch/sh/include/mach-common/mach/titan.h
delete mode 100644 arch/sh/include/mach-common/mach/urquell.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/dma.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/maple.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/pci.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/sysasic.h
delete mode 100644 arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-ecovec24/mach/romimage.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/romimage.h
delete mode 100644 arch/sh/include/mach-landisk/mach/gio.h
delete mode 100644 arch/sh/include/mach-landisk/mach/iodata_landisk.h
delete mode 100644 arch/sh/include/mach-migor/mach/migor.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/fpga.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/irq.h
delete mode 100644 arch/sh/include/mach-se/mach/mrshpc.h
delete mode 100644 arch/sh/include/mach-se/mach/se.h
delete mode 100644 arch/sh/include/mach-se/mach/se7206.h
delete mode 100644 arch/sh/include/mach-se/mach/se7343.h
delete mode 100644 arch/sh/include/mach-se/mach/se7721.h
delete mode 100644 arch/sh/include/mach-se/mach/se7722.h
delete mode 100644 arch/sh/include/mach-se/mach/se7724.h
delete mode 100644 arch/sh/include/mach-se/mach/se7751.h
delete mode 100644 arch/sh/include/mach-se/mach/se7780.h
delete mode 100644 arch/sh/include/mach-sh03/mach/io.h
delete mode 100644 arch/sh/include/mach-sh03/mach/sh03.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/hardware.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/ilsel.h
delete mode 100644 arch/sh/include/uapi/asm/Kbuild
delete mode 100644 arch/sh/include/uapi/asm/auxvec.h
delete mode 100644 arch/sh/include/uapi/asm/byteorder.h
delete mode 100644 arch/sh/include/uapi/asm/cachectl.h
delete mode 100644 arch/sh/include/uapi/asm/cpu-features.h
delete mode 100644 arch/sh/include/uapi/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/uapi/asm/ioctls.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types_32.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace_32.h
delete mode 100644 arch/sh/include/uapi/asm/sigcontext.h
delete mode 100644 arch/sh/include/uapi/asm/signal.h
delete mode 100644 arch/sh/include/uapi/asm/sockios.h
delete mode 100644 arch/sh/include/uapi/asm/stat.h
delete mode 100644 arch/sh/include/uapi/asm/swab.h
delete mode 100644 arch/sh/include/uapi/asm/unistd.h
delete mode 100644 arch/sh/kernel/.gitignore
delete mode 100644 arch/sh/kernel/Makefile
delete mode 100644 arch/sh/kernel/asm-offsets.c
delete mode 100644 arch/sh/kernel/cpu/Makefile
delete mode 100644 arch/sh/kernel/cpu/adc.c
delete mode 100644 arch/sh/kernel/cpu/clock-cpg.c
delete mode 100644 arch/sh/kernel/cpu/clock.c
delete mode 100644 arch/sh/kernel/cpu/fpu.c
delete mode 100644 arch/sh/kernel/cpu/init.c
delete mode 100644 arch/sh/kernel/cpu/irq/Makefile
delete mode 100644 arch/sh/kernel/cpu/irq/imask.c
delete mode 100644 arch/sh/kernel/cpu/irq/ipr.c
delete mode 100644 arch/sh/kernel/cpu/pfc.c
delete mode 100644 arch/sh/kernel/cpu/proc.c
delete mode 100644 arch/sh/kernel/cpu/sh2/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2/clock-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2/setup-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/smp-j2.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/opcode_helper.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh3/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7706.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7709.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7712.c
delete mode 100644 arch/sh/kernel/cpu/sh3/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh3/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/swsusp.S
delete mode 100644 arch/sh/kernel/cpu/sh4/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4.c
delete mode 100644 arch/sh/kernel/cpu/sh4/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh4/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7750.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7760.c
delete mode 100644 arch/sh/kernel/cpu/sh4/softfloat.c
delete mode 100644 arch/sh/kernel/cpu/sh4/sq.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/intc-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/serial-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/smp-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/ubc.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/Makefile
delete mode 100644 arch/sh/kernel/cpu/shmobile/cpuidle.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/pm.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/sleep.S
delete mode 100644 arch/sh/kernel/crash_dump.c
delete mode 100644 arch/sh/kernel/debugtraps.S
delete mode 100644 arch/sh/kernel/disassemble.c
delete mode 100644 arch/sh/kernel/dma-coherent.c
delete mode 100644 arch/sh/kernel/dumpstack.c
delete mode 100644 arch/sh/kernel/dwarf.c
delete mode 100644 arch/sh/kernel/entry-common.S
delete mode 100644 arch/sh/kernel/ftrace.c
delete mode 100644 arch/sh/kernel/head_32.S
delete mode 100644 arch/sh/kernel/hw_breakpoint.c
delete mode 100644 arch/sh/kernel/idle.c
delete mode 100644 arch/sh/kernel/io.c
delete mode 100644 arch/sh/kernel/io_trapped.c
delete mode 100644 arch/sh/kernel/iomap.c
delete mode 100644 arch/sh/kernel/ioport.c
delete mode 100644 arch/sh/kernel/irq.c
delete mode 100644 arch/sh/kernel/irq_32.c
delete mode 100644 arch/sh/kernel/kdebugfs.c
delete mode 100644 arch/sh/kernel/kgdb.c
delete mode 100644 arch/sh/kernel/kprobes.c
delete mode 100644 arch/sh/kernel/machine_kexec.c
delete mode 100644 arch/sh/kernel/machvec.c
delete mode 100644 arch/sh/kernel/module.c
delete mode 100644 arch/sh/kernel/nmi_debug.c
delete mode 100644 arch/sh/kernel/perf_callchain.c
delete mode 100644 arch/sh/kernel/perf_event.c
delete mode 100644 arch/sh/kernel/process.c
delete mode 100644 arch/sh/kernel/process_32.c
delete mode 100644 arch/sh/kernel/ptrace.c
delete mode 100644 arch/sh/kernel/ptrace_32.c
delete mode 100644 arch/sh/kernel/reboot.c
delete mode 100644 arch/sh/kernel/relocate_kernel.S
delete mode 100644 arch/sh/kernel/return_address.c
delete mode 100644 arch/sh/kernel/setup.c
delete mode 100644 arch/sh/kernel/sh_bios.c
delete mode 100644 arch/sh/kernel/sh_ksyms_32.c
delete mode 100644 arch/sh/kernel/signal_32.c
delete mode 100644 arch/sh/kernel/smp.c
delete mode 100644 arch/sh/kernel/stacktrace.c
delete mode 100644 arch/sh/kernel/swsusp.c
delete mode 100644 arch/sh/kernel/sys_sh.c
delete mode 100644 arch/sh/kernel/sys_sh32.c
delete mode 100644 arch/sh/kernel/syscalls/Makefile
delete mode 100644 arch/sh/kernel/syscalls/syscall.tbl
delete mode 100644 arch/sh/kernel/syscalls_32.S
delete mode 100644 arch/sh/kernel/time.c
delete mode 100644 arch/sh/kernel/topology.c
delete mode 100644 arch/sh/kernel/traps.c
delete mode 100644 arch/sh/kernel/traps_32.c
delete mode 100644 arch/sh/kernel/unwinder.c
delete mode 100644 arch/sh/kernel/vmlinux.lds.S
delete mode 100644 arch/sh/kernel/vsyscall/.gitignore
delete mode 100644 arch/sh/kernel/vsyscall/Makefile
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-note.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-syscall.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-trapa.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.c
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.lds.S
delete mode 100644 arch/sh/lib/Makefile
delete mode 100644 arch/sh/lib/__clear_user.S
delete mode 100644 arch/sh/lib/ashiftrt.S
delete mode 100644 arch/sh/lib/ashldi3.c
delete mode 100644 arch/sh/lib/ashlsi3.S
delete mode 100644 arch/sh/lib/ashrdi3.c
delete mode 100644 arch/sh/lib/ashrsi3.S
delete mode 100644 arch/sh/lib/checksum.S
delete mode 100644 arch/sh/lib/copy_page.S
delete mode 100644 arch/sh/lib/delay.c
delete mode 100644 arch/sh/lib/div64-generic.c
delete mode 100644 arch/sh/lib/div64.S
delete mode 100644 arch/sh/lib/io.c
delete mode 100644 arch/sh/lib/libgcc.h
delete mode 100644 arch/sh/lib/lshrdi3.c
delete mode 100644 arch/sh/lib/lshrsi3.S
delete mode 100644 arch/sh/lib/mcount.S
delete mode 100644 arch/sh/lib/memchr.S
delete mode 100644 arch/sh/lib/memcpy-sh4.S
delete mode 100644 arch/sh/lib/memcpy.S
delete mode 100644 arch/sh/lib/memmove.S
delete mode 100644 arch/sh/lib/memset-sh4.S
delete mode 100644 arch/sh/lib/memset.S
delete mode 100644 arch/sh/lib/movmem.S
delete mode 100644 arch/sh/lib/strlen.S
delete mode 100644 arch/sh/lib/udiv_qrnnd.S
delete mode 100644 arch/sh/lib/udivsi3.S
delete mode 100644 arch/sh/lib/udivsi3_i4i-Os.S
delete mode 100644 arch/sh/lib/udivsi3_i4i.S
delete mode 100644 arch/sh/math-emu/Makefile
delete mode 100644 arch/sh/math-emu/math.c
delete mode 100644 arch/sh/math-emu/sfp-util.h
delete mode 100644 arch/sh/mm/Kconfig
delete mode 100644 arch/sh/mm/Makefile
delete mode 100644 arch/sh/mm/alignment.c
delete mode 100644 arch/sh/mm/asids-debugfs.c
delete mode 100644 arch/sh/mm/cache-debugfs.c
delete mode 100644 arch/sh/mm/cache-j2.c
delete mode 100644 arch/sh/mm/cache-sh2.c
delete mode 100644 arch/sh/mm/cache-sh2a.c
delete mode 100644 arch/sh/mm/cache-sh3.c
delete mode 100644 arch/sh/mm/cache-sh4.c
delete mode 100644 arch/sh/mm/cache-sh7705.c
delete mode 100644 arch/sh/mm/cache-shx3.c
delete mode 100644 arch/sh/mm/cache.c
delete mode 100644 arch/sh/mm/consistent.c
delete mode 100644 arch/sh/mm/extable_32.c
delete mode 100644 arch/sh/mm/fault.c
delete mode 100644 arch/sh/mm/flush-sh4.c
delete mode 100644 arch/sh/mm/hugetlbpage.c
delete mode 100644 arch/sh/mm/init.c
delete mode 100644 arch/sh/mm/ioremap.c
delete mode 100644 arch/sh/mm/ioremap.h
delete mode 100644 arch/sh/mm/ioremap_fixed.c
delete mode 100644 arch/sh/mm/kmap.c
delete mode 100644 arch/sh/mm/mmap.c
delete mode 100644 arch/sh/mm/nommu.c
delete mode 100644 arch/sh/mm/numa.c
delete mode 100644 arch/sh/mm/pgtable.c
delete mode 100644 arch/sh/mm/pmb.c
delete mode 100644 arch/sh/mm/sram.c
delete mode 100644 arch/sh/mm/tlb-debugfs.c
delete mode 100644 arch/sh/mm/tlb-pteaex.c
delete mode 100644 arch/sh/mm/tlb-sh3.c
delete mode 100644 arch/sh/mm/tlb-sh4.c
delete mode 100644 arch/sh/mm/tlb-urb.c
delete mode 100644 arch/sh/mm/tlbex_32.c
delete mode 100644 arch/sh/mm/tlbflush_32.c
delete mode 100644 arch/sh/mm/uncached.c
delete mode 100644 arch/sh/tools/Makefile
delete mode 100644 arch/sh/tools/gen-mach-types
delete mode 100644 arch/sh/tools/mach-types
delete mode 100644 drivers/video/logo/logo_superh_clut224.ppm
delete mode 100644 drivers/video/logo/logo_superh_vga16.ppm
diff --git a/Documentation/arch.rst b/Documentation/arch.rst
index 41a66a8b38e424..18669458eec4dd 100644
--- a/Documentation/arch.rst
+++ b/Documentation/arch.rst
@@ -22,7 +22,6 @@ implementation.
powerpc/index
riscv/index
s390/index
- sh/index
sparc/index
x86/index
xtensa/index
diff --git a/Documentation/sh/booting.rst b/Documentation/sh/booting.rst
deleted file mode 100644
index d851c49a01bf07..00000000000000
--- a/Documentation/sh/booting.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-DeviceTree Booting
-------------------
-
- Device-tree compatible SH bootloaders are expected to provide the physical
- address of the device tree blob in r4. Since legacy bootloaders did not
- guarantee any particular initial register state, kernels built to
- inter-operate with old bootloaders must either use a builtin DTB or
- select a legacy board option (something other than CONFIG_SH_DEVICE_TREE)
- that does not use device tree. Support for the latter is being phased out
- in favor of device tree.
diff --git a/Documentation/sh/features.rst b/Documentation/sh/features.rst
deleted file mode 100644
index f722af3b6c9934..00000000000000
--- a/Documentation/sh/features.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. kernel-feat:: $srctree/Documentation/features sh
diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
deleted file mode 100644
index c64776738cf6b2..00000000000000
--- a/Documentation/sh/index.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-=======================
-SuperH Interfaces Guide
-=======================
-
-:Author: Paul Mundt
-
-.. toctree::
- :maxdepth: 1
-
- booting
- new-machine
- register-banks
-
- features
-
-Memory Management
-=================
-
-SH-4
-----
-
-Store Queue API
-~~~~~~~~~~~~~~~
-
-.. kernel-doc:: arch/sh/kernel/cpu/sh4/sq.c
- :export:
-
-Machine Specific Interfaces
-===========================
-
-mach-dreamcast
---------------
-
-.. kernel-doc:: arch/sh/boards/mach-dreamcast/rtc.c
- :internal:
-
-mach-x3proto
-------------
-
-.. kernel-doc:: arch/sh/boards/mach-x3proto/ilsel.c
- :export:
-
-Busses
-======
-
-SuperHyway
-----------
-
-.. kernel-doc:: drivers/sh/superhyway/superhyway.c
- :export:
-
-Maple
------
-
-.. kernel-doc:: drivers/sh/maple/maple.c
- :export:
diff --git a/Documentation/sh/new-machine.rst b/Documentation/sh/new-machine.rst
deleted file mode 100644
index e501c52b3b30d2..00000000000000
--- a/Documentation/sh/new-machine.rst
+++ /dev/null
@@ -1,277 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=============================
-Adding a new board to LinuxSH
-=============================
-
- Paul Mundt <lethal@linux-sh.org>
-
-This document attempts to outline what steps are necessary to add support
-for new boards to the LinuxSH port under the new 2.5 and 2.6 kernels. This
-also attempts to outline some of the noticeable changes between the 2.4
-and the 2.5/2.6 SH backend.
-
-1. New Directory Structure
-==========================
-
-The first thing to note is the new directory structure. Under 2.4, most
-of the board-specific code (with the exception of stboards) ended up
-in arch/sh/kernel/ directly, with board-specific headers ending up in
-include/asm-sh/. For the new kernel, things are broken out by board type,
-companion chip type, and CPU type. Looking at a tree view of this directory
-hierarchy looks like the following:
-
-Board-specific code::
-
- .
- |-- arch
- | `-- sh
- | `-- boards
- | |-- adx
- | | `-- board-specific files
- | |-- bigsur
- | | `-- board-specific files
- | |
- | ... more boards here ...
- |
- `-- include
- `-- asm-sh
- |-- adx
- | `-- board-specific headers
- |-- bigsur
- | `-- board-specific headers
- |
- .. more boards here ...
-
-Next, for companion chips::
-
- .
- `-- arch
- `-- sh
- `-- cchips
- `-- hd6446x
- `-- hd64461
- `-- cchip-specific files
-
-... and so on. Headers for the companion chips are treated the same way as
-board-specific headers. Thus, include/asm-sh/hd64461 is home to all of the
-hd64461-specific headers.
-
-Finally, CPU family support is also abstracted::
-
- .
- |-- arch
- | `-- sh
- | |-- kernel
- | | `-- cpu
- | | |-- sh2
- | | | `-- SH-2 generic files
- | | |-- sh3
- | | | `-- SH-3 generic files
- | | `-- sh4
- | | `-- SH-4 generic files
- | `-- mm
- | `-- This is also broken out per CPU family, so each family can
- | have their own set of cache/tlb functions.
- |
- `-- include
- `-- asm-sh
- |-- cpu-sh2
- | `-- SH-2 specific headers
- |-- cpu-sh3
- | `-- SH-3 specific headers
- `-- cpu-sh4
- `-- SH-4 specific headers
-
-It should be noted that CPU subtypes are _not_ abstracted. Thus, these still
-need to be dealt with by the CPU family specific code.
-
-2. Adding a New Board
-=====================
-
-The first thing to determine is whether the board you are adding will be
-isolated, or whether it will be part of a family of boards that can mostly
-share the same board-specific code with minor differences.
-
-In the first case, this is just a matter of making a directory for your
-board in arch/sh/boards/ and adding rules to hook your board in with the
-build system (more on this in the next section). However, for board families
-it makes more sense to have a common top-level arch/sh/boards/ directory
-and then populate that with sub-directories for each member of the family.
-Both the Solution Engine and the hp6xx boards are an example of this.
-
-After you have setup your new arch/sh/boards/ directory, remember that you
-should also add a directory in include/asm-sh for headers localized to this
-board (if there are going to be more than one). In order to interoperate
-seamlessly with the build system, it's best to have this directory the same
-as the arch/sh/boards/ directory name, though if your board is again part of
-a family, the build system has ways of dealing with this (via incdir-y
-overloading), and you can feel free to name the directory after the family
-member itself.
-
-There are a few things that each board is required to have, both in the
-arch/sh/boards and the include/asm-sh/ hierarchy. In order to better
-explain this, we use some examples for adding an imaginary board. For
-setup code, we're required at the very least to provide definitions for
-get_system_type() and platform_setup(). For our imaginary board, this
-might look something like::
-
- /*
- * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
- */
- #include <linux/init.h>
-
- const char *get_system_type(void)
- {
- return "FooTech Vaporboard";
- }
-
- int __init platform_setup(void)
- {
- /*
- * If our hardware actually existed, we would do real
- * setup here. Though it's also sane to leave this empty
- * if there's no real init work that has to be done for
- * this board.
- */
-
- /* Start-up imaginary PCI ... */
-
- /* And whatever else ... */
-
- return 0;
- }
-
-Our new imaginary board will also have to tie into the machvec in order for it
-to be of any use.
-
-machvec functions fall into a number of categories:
-
- - I/O functions to IO memory (inb etc) and PCI/main memory (readb etc).
- - I/O mapping functions (ioport_map, ioport_unmap, etc).
- - a 'heartbeat' function.
- - PCI and IRQ initialization routines.
- - Consistent allocators (for boards that need special allocators,
- particularly for allocating out of some board-specific SRAM for DMA
- handles).
-
-There are machvec functions added and removed over time, so always be sure to
-consult include/asm-sh/machvec.h for the current state of the machvec.
-
-The kernel will automatically wrap in generic routines for undefined function
-pointers in the machvec at boot time, as machvec functions are referenced
-unconditionally throughout most of the tree. Some boards have incredibly
-sparse machvecs (such as the dreamcast and sh03), whereas others must define
-virtually everything (rts7751r2d).
-
-Adding a new machine is relatively trivial (using vapor as an example):
-
-If the board-specific definitions are quite minimalistic, as is the case for
-the vast majority of boards, simply having a single board-specific header is
-sufficient.
-
- - add a new file include/asm-sh/vapor.h which contains prototypes for
- any machine specific IO functions prefixed with the machine name, for
- example vapor_inb. These will be needed when filling out the machine
- vector.
-
- Note that these prototypes are generated automatically by setting
- __IO_PREFIX to something sensible. A typical example would be::
-
- #define __IO_PREFIX vapor
- #include <asm/io_generic.h>
-
- somewhere in the board-specific header. Any boards being ported that still
- have a legacy io.h should remove it entirely and switch to the new model.
-
- - Add machine vector definitions to the board's setup.c. At a bare minimum,
- this must be defined as something like::
-
- struct sh_machine_vector mv_vapor __initmv = {
- .mv_name = "vapor",
- };
- ALIAS_MV(vapor)
-
- - finally add a file arch/sh/boards/vapor/io.c, which contains definitions of
- the machine specific io functions (if there are enough to warrant it).
-
-3. Hooking into the Build System
-================================
-
-Now that we have the corresponding directories setup, and all of the
-board-specific code is in place, it's time to look at how to get the
-whole mess to fit into the build system.
-
-Large portions of the build system are now entirely dynamic, and merely
-require the proper entry here and there in order to get things done.
-
-The first thing to do is to add an entry to arch/sh/Kconfig, under the
-"System type" menu::
-
- config SH_VAPOR
- bool "Vapor"
- help
- select Vapor if configuring for a FooTech Vaporboard.
-
-next, this has to be added into arch/sh/Makefile. All boards require a
-machdir-y entry in order to be built. This entry needs to be the name of
-the board directory as it appears in arch/sh/boards, even if it is in a
-sub-directory (in which case, all parent directories below arch/sh/boards/
-need to be listed). For our new board, this entry can look like::
-
- machdir-$(CONFIG_SH_VAPOR) += vapor
-
-provided that we've placed everything in the arch/sh/boards/vapor/ directory.
-
-Next, the build system assumes that your include/asm-sh directory will also
-be named the same. If this is not the case (as is the case with multiple
-boards belonging to a common family), then the directory name needs to be
-implicitly appended to incdir-y. The existing code manages this for the
-Solution Engine and hp6xx boards, so see these for an example.
-
-Once that is taken care of, it's time to add an entry for the mach type.
-This is done by adding an entry to the end of the arch/sh/tools/mach-types
-list. The method for doing this is self explanatory, and so we won't waste
-space restating it here. After this is done, you will be able to use
-implicit checks for your board if you need this somewhere throughout the
-common code, such as::
-
- /* Make sure we're on the FooTech Vaporboard */
- if (!mach_is_vapor())
- return -ENODEV;
-
-also note that the mach_is_boardname() check will be implicitly forced to
-lowercase, regardless of the fact that the mach-types entries are all
-uppercase. You can read the script if you really care, but it's pretty ugly,
-so you probably don't want to do that.
-
-Now all that's left to do is providing a defconfig for your new board. This
-way, other people who end up with this board can simply use this config
-for reference instead of trying to guess what settings are supposed to be
-used on it.
-
-Also, as soon as you have copied over a sample .config for your new board
-(assume arch/sh/configs/vapor_defconfig), you can also use this directly as a
-build target, and it will be implicitly listed as such in the help text.
-
-Looking at the 'make help' output, you should now see something like:
-
-Architecture specific targets (sh):
-
- ======================= =============================================
- zImage Compressed kernel image (arch/sh/boot/zImage)
- adx_defconfig Build for adx
- cqreek_defconfig Build for cqreek
- dreamcast_defconfig Build for dreamcast
- ...
- vapor_defconfig Build for vapor
- ======================= =============================================
-
-which then allows you to do::
-
- $ make ARCH=sh CROSS_COMPILE=sh4-linux- vapor_defconfig vmlinux
-
-which will in turn copy the defconfig for this board, run it through
-oldconfig (prompting you for any new options since the time of creation),
-and start you on your way to having a functional kernel for your new
-board.
diff --git a/Documentation/sh/register-banks.rst b/Documentation/sh/register-banks.rst
deleted file mode 100644
index 2bef5c8fcbbc06..00000000000000
--- a/Documentation/sh/register-banks.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================================
-Notes on register bank usage in the kernel
-==========================================
-
-Introduction
-------------
-
-The SH-3 and SH-4 CPU families traditionally include a single partial register
-bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
-may have more full-featured banking or simply no such capabilities at all.
-
-SR.RB banking
--------------
-
-In the case of this type of banking, banked registers are mapped directly to
-r0 ... r7 if SR.RB is set to the bank we are interested in, otherwise ldc/stc
-can still be used to reference the banked registers (as r0_bank ... r7_bank)
-when in the context of another bank. The developer must keep the SR.RB value
-in mind when writing code that utilizes these banked registers, for obvious
-reasons. Userspace is also not able to poke at the bank1 values, so these can
-be used rather effectively as scratch registers by the kernel.
-
-Presently the kernel uses several of these registers.
-
- - r0_bank, r1_bank (referenced as k0 and k1, used for scratch
- registers when doing exception handling).
-
- - r2_bank (used to track the EXPEVT/INTEVT code)
-
- - Used by do_IRQ() and friends for doing irq mapping based off
- of the interrupt exception vector jump table offset
-
- - r6_bank (global interrupt mask)
-
- - The SR.IMASK interrupt handler makes use of this to set the
- interrupt priority level (used by local_irq_enable())
-
- - r7_bank (current)
diff --git a/MAINTAINERS b/MAINTAINERS
index e278cd5d0de00e..5899ff135e3deb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20067,16 +20067,6 @@ S: Maintained
F: Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
F: drivers/watchdog/sunplus_wdt.c
-SUPERH
-M: Yoshinori Sato <ysato@users.sourceforge.jp>
-M: Rich Felker <dalias@libc.org>
-L: linux-sh@vger.kernel.org
-S: Maintained
-Q: http://patchwork.kernel.org/project/linux-sh/list/
-F: Documentation/sh/
-F: arch/sh/
-F: drivers/sh/
-
SUSPEND TO RAM
M: "Rafael J. Wysocki" <rafael@kernel.org>
M: Len Brown <len.brown@intel.com>
diff --git a/arch/sh/Kbuild b/arch/sh/Kbuild
deleted file mode 100644
index be171880977e5d..00000000000000
--- a/arch/sh/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += kernel/ mm/ boards/
-obj-$(CONFIG_SH_FPU_EMU) += math-emu/
-obj-$(CONFIG_USE_BUILTIN_DTB) += boot/dts/
-
-# for cleaning
-subdir- += boot
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
deleted file mode 100644
index 0665ac0add0b49..00000000000000
--- a/arch/sh/Kconfig
+++ /dev/null
@@ -1,793 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config SUPERH
- def_bool y
- select ARCH_32BIT_OFF_T
- select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
- select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
- select ARCH_HAVE_CUSTOM_GPIO_H
- select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
- select ARCH_HAS_BINFMT_FLAT if !MMU
- select ARCH_HAS_CURRENT_STACK_POINTER
- select ARCH_HAS_GIGANTIC_PAGE
- select ARCH_HAS_GCOV_PROFILE_ALL
- select ARCH_HAS_PTE_SPECIAL
- select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- select ARCH_HIBERNATION_POSSIBLE if MMU
- select ARCH_MIGHT_HAVE_PC_PARPORT
- select ARCH_WANT_IPC_PARSE_VERSION
- select CPU_NO_EFFICIENT_FFS
- select DMA_DECLARE_COHERENT
- select GENERIC_ATOMIC64
- select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
- select GENERIC_IDLE_POLL_SETUP
- select GENERIC_IRQ_SHOW
- select GENERIC_PCI_IOMAP if PCI
- select GENERIC_SCHED_CLOCK
- select GENERIC_SMP_IDLE_THREAD
- select GUP_GET_PXX_LOW_HIGH if X2TLB
- select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_KGDB
- select HAVE_ARCH_SECCOMP_FILTER
- select HAVE_ARCH_TRACEHOOK
- select HAVE_DEBUG_BUGVERBOSE
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FAST_GUP if MMU
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_FUNCTION_TRACER
- select HAVE_FTRACE_MCOUNT_RECORD
- select HAVE_HW_BREAKPOINT
- select HAVE_IOREMAP_PROT if MMU && !X2TLB
- select HAVE_KERNEL_BZIP2
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_LZMA
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_XZ
- select HAVE_KPROBES
- select HAVE_KRETPROBES
- select HAVE_MIXED_BREAKPOINTS_REGS
- select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
- select HAVE_NMI
- select HAVE_PATA_PLATFORM
- select HAVE_PERF_EVENTS
- select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_UID16
- select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
- select HAVE_STACKPROTECTOR
- select HAVE_SYSCALL_TRACEPOINTS
- select IRQ_FORCED_THREADING
- select MODULES_USE_ELF_RELA
- select NEED_SG_DMA_LENGTH
- select NO_DMA if !MMU && !DMA_COHERENT
- select NO_GENERIC_PCI_IOPORT_MAP if PCI
- select OLD_SIGACTION
- select OLD_SIGSUSPEND
- select PCI_DOMAINS if PCI
- select PERF_EVENTS
- select PERF_USE_VMALLOC
- select RTC_LIB
- select SPARSE_IRQ
- select TRACE_IRQFLAGS_SUPPORT
- help
- The SuperH is a RISC processor targeted for use in embedded systems
- and consumer electronics; it was also used in the Sega Dreamcast
- gaming console. The SuperH port has a home page at
- <http://www.linux-sh.org/>.
-
-config GENERIC_BUG
- def_bool y
- depends on BUG
-
-config GENERIC_HWEIGHT
- def_bool y
-
-config GENERIC_CALIBRATE_DELAY
- bool
-
-config GENERIC_LOCKBREAK
- def_bool y
- depends on SMP && PREEMPTION
-
-config ARCH_SUSPEND_POSSIBLE
- def_bool n
-
-config ARCH_HIBERNATION_POSSIBLE
- def_bool n
-
-config SYS_SUPPORTS_APM_EMULATION
- bool
- select ARCH_SUSPEND_POSSIBLE
-
-config SYS_SUPPORTS_SMP
- bool
-
-config SYS_SUPPORTS_NUMA
- bool
-
-config STACKTRACE_SUPPORT
- def_bool y
-
-config LOCKDEP_SUPPORT
- def_bool y
-
-config ARCH_HAS_ILOG2_U32
- def_bool n
-
-config ARCH_HAS_ILOG2_U64
- def_bool n
-
-config NO_IOPORT_MAP
- def_bool !PCI
- depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
- !SH_SOLUTION_ENGINE
-
-config IO_TRAPPED
- bool
-
-config SWAP_IO_SPACE
- bool
-
-config DMA_COHERENT
- bool
-
-config DMA_NONCOHERENT
- def_bool !NO_DMA && !DMA_COHERENT
- select ARCH_HAS_DMA_PREP_COHERENT
- select ARCH_HAS_SYNC_DMA_FOR_DEVICE
- select DMA_DIRECT_REMAP
-
-config PGTABLE_LEVELS
- default 3 if X2TLB
- default 2
-
-menu "System type"
-
-#
-# Processor families
-#
-config CPU_SH2
- bool
- select SH_INTC
-
-config CPU_SH2A
- bool
- select CPU_SH2
- select UNCACHED_MAPPING
-
-config CPU_J2
- bool
- select CPU_SH2
- select OF
- select OF_EARLY_FLATTREE
-
-config CPU_SH3
- bool
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4
- bool
- select ARCH_SUPPORTS_HUGETLBFS if MMU
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4A
- bool
- select CPU_SH4
-
-config CPU_SH4AL_DSP
- bool
- select CPU_SH4A
- select CPU_HAS_DSP
-
-config CPU_SHX2
- bool
-
-config CPU_SHX3
- bool
- select DMA_COHERENT
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_NUMA
-
-config ARCH_SHMOBILE
- bool
- select ARCH_SUSPEND_POSSIBLE
- select PM
-
-config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
-
-choice
- prompt "Processor sub-type selection"
-
-#
-# Processor subtypes
-#
-
-# SH-2 Processor Support
-
-config CPU_SUBTYPE_SH7619
- bool "Support SH7619 processor"
- select CPU_SH2
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_J2
- bool "Support J2 processor"
- select CPU_J2
- select SYS_SUPPORTS_SMP
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-
-# SH-2A Processor Support
-
-config CPU_SUBTYPE_SH7201
- bool "Support SH7201 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7203
- bool "Support SH7203 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7206
- bool "Support SH7206 processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7263
- bool "Support SH7263 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7264
- bool "Support SH7264 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7269
- bool "Support SH7269 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_MXG
- bool "Support MX-G processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_MTU2
- help
- Select MX-G if running on an R8A03022BG part.
-
-# SH-3 Processor Support
-
-config CPU_SUBTYPE_SH7705
- bool "Support SH7705 processor"
- select CPU_SH3
-
-config CPU_SUBTYPE_SH7706
- bool "Support SH7706 processor"
- select CPU_SH3
- help
- Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
-
-config CPU_SUBTYPE_SH7707
- bool "Support SH7707 processor"
- select CPU_SH3
- help
- Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
-
-config CPU_SUBTYPE_SH7708
- bool "Support SH7708 processor"
- select CPU_SH3
- help
- Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
- if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-config CPU_SUBTYPE_SH7709
- bool "Support SH7709 processor"
- select CPU_SH3
- help
- Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
-
-config CPU_SUBTYPE_SH7710
- bool "Support SH7710 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7710 if you have a SH3-DSP SH7710 CPU.
-
-config CPU_SUBTYPE_SH7712
- bool "Support SH7712 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7712 if you have a SH3-DSP SH7712 CPU.
-
-config CPU_SUBTYPE_SH7720
- bool "Support SH7720 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- select PINCTRL
- help
- Select SH7720 if you have a SH3-DSP SH7720 CPU.
-
-config CPU_SUBTYPE_SH7721
- bool "Support SH7721 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7721 if you have a SH3-DSP SH7721 CPU.
-
-# SH-4 Processor Support
-
-config CPU_SUBTYPE_SH7750
- bool "Support SH7750 processor"
- select CPU_SH4
- help
- Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-config CPU_SUBTYPE_SH7091
- bool "Support SH7091 processor"
- select CPU_SH4
- help
- Select SH7091 if you have an SH-4 based Sega device (such as
- the Dreamcast, Naomi, and Naomi 2).
-
-config CPU_SUBTYPE_SH7750R
- bool "Support SH7750R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7750S
- bool "Support SH7750S processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7751
- bool "Support SH7751 processor"
- select CPU_SH4
- help
- Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
- or if you have a HD6417751R CPU.
-
-config CPU_SUBTYPE_SH7751R
- bool "Support SH7751R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7760
- bool "Support SH7760 processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH4_202
- bool "Support SH4-202 processor"
- select CPU_SH4
-
-# SH-4A Processor Support
-
-config CPU_SUBTYPE_SH7723
- bool "Support SH7723 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7723 if you have an SH-MobileR2 CPU.
-
-config CPU_SUBTYPE_SH7724
- bool "Support SH7724 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7724 if you have an SH-MobileR2R CPU.
-
-config CPU_SUBTYPE_SH7734
- bool "Support SH7734 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7734 if you have a SH4A SH7734 CPU.
-
-config CPU_SUBTYPE_SH7757
- bool "Support SH7757 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7757 if you have a SH4A SH7757 CPU.
-
-config CPU_SUBTYPE_SH7763
- bool "Support SH7763 processor"
- select CPU_SH4A
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
-
-config CPU_SUBTYPE_SH7770
- bool "Support SH7770 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7780
- bool "Support SH7780 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7785
- bool "Support SH7785 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select PINCTRL
-
-config CPU_SUBTYPE_SH7786
- bool "Support SH7786 processor"
- select CPU_SH4A
- select CPU_SHX3
- select CPU_HAS_PTEAEX
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select USB_OHCI_SH if USB_OHCI_HCD
- select USB_EHCI_SH if USB_EHCI_HCD
- select PINCTRL
-
-config CPU_SUBTYPE_SHX3
- bool "Support SH-X3 processor"
- select CPU_SH4A
- select CPU_SHX3
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select GPIOLIB
- select PINCTRL
-
-# SH4AL-DSP Processor Support
-
-config CPU_SUBTYPE_SH7343
- bool "Support SH7343 processor"
- select CPU_SH4AL_DSP
- select ARCH_SHMOBILE
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_SH7722
- bool "Support SH7722 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
-
-config CPU_SUBTYPE_SH7366
- bool "Support SH7366 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
-
-endchoice
-
-source "arch/sh/mm/Kconfig"
-
-source "arch/sh/Kconfig.cpu"
-
-source "arch/sh/boards/Kconfig"
-
-menu "Timer and clock configuration"
-
-config SH_PCLK_FREQ
- int "Peripheral clock frequency (in Hz)"
- depends on SH_CLK_CPG_LEGACY
- default "31250000" if CPU_SUBTYPE_SH7619
- default "33333333" if CPU_SUBTYPE_SH7770 || \
- CPU_SUBTYPE_SH7760 || \
- CPU_SUBTYPE_SH7705 || \
- CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || \
- CPU_SUBTYPE_MXG
- default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
- default "66000000" if CPU_SUBTYPE_SH4_202
- default "50000000"
- help
- This option is used to specify the peripheral clock frequency.
- This is necessary for determining the reference clock value on
- platforms lacking an RTC.
-
-config SH_CLK_CPG
- def_bool y
-
-config SH_CLK_CPG_LEGACY
- depends on SH_CLK_CPG
- def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
- !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
- !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
- !CPU_SUBTYPE_SH7269
-
-endmenu
-
-menu "CPU Frequency scaling"
-source "drivers/cpufreq/Kconfig"
-endmenu
-
-source "arch/sh/drivers/Kconfig"
-
-endmenu
-
-menu "Kernel features"
-
-source "kernel/Kconfig.hz"
-
-config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on MMU
- select KEXEC_CORE
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. As of this writing the exact hardware
- interface is strongly in flux, so no good recommendation can be
- made.
-
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on BROKEN_ON_SMP
- help
- Generate crash dump after being started by kexec.
- This should be normally only set in special crash dump kernels
- which are loaded in the main kernel with kexec-tools into
- a specially reserved region and then later executed after
- a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel using
- PHYSICAL_START.
-
- For more details see Documentation/admin-guide/kdump/kdump.rst
-
-config KEXEC_JUMP
- bool "kexec jump (EXPERIMENTAL)"
- depends on KEXEC && HIBERNATION
- help
- Jump between original kernel and kexeced kernel and invoke
- code via KEXEC
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
- default MEMORY_START
- help
- This gives the physical address where the kernel is loaded
- and is ordinarily the same as MEMORY_START.
-
- Different values are primarily used in the case of kexec on panic
- where the fail safe kernel needs to run at a different address
- than the panic-ed kernel.
-
-config SMP
- bool "Symmetric multi-processing support"
- depends on SYS_SUPPORTS_SMP
- help
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y.
-
- If you say N here, the kernel will run on uni- and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- uniprocessor machines. On a uniprocessor machine, the kernel
- will run faster if you say N here.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below.
-
- See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
- available at <https://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
- depends on SMP
- default "4" if CPU_SUBTYPE_SHX3
- default "2"
- help
- This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 32 and the
- minimum value which makes sense is 2.
-
- This is purely to save memory - each supported CPU adds
- approximately eight kilobytes to the kernel image.
-
-config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP
- help
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
-
-config GUSA
- def_bool y
- depends on !SMP
- help
- This enables support for gUSA (general UserSpace Atomicity).
- This is the default implementation for both UP and non-ll/sc
- CPUs, and is used by the libc, amongst others.
-
- For additional information, design information can be found
- in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
-
- This should only be disabled for special cases where alternate
- atomicity implementations exist.
-
-config GUSA_RB
- bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
- depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
- help
- Enabling this option will allow the kernel to implement some
- atomic operations using a software implementation of load-locked/
- store-conditional (LLSC). On machines which do not have hardware
- LLSC, this should be more efficient than the other alternative of
- disabling interrupts around the atomic sequence.
-
-config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU
- default y
- help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
-
-source "drivers/sh/Kconfig"
-
-endmenu
-
-menu "Boot options"
-
-config USE_BUILTIN_DTB
- bool "Use builtin DTB"
- default n
- depends on SH_DEVICE_TREE
- help
- Link a device tree blob for particular hardware into the kernel,
- suppressing use of the DTB pointer provided by the bootloader.
- This option should only be used with legacy bootloaders that are
- not capable of providing a DTB to the kernel, or for experimental
- hardware without stable device tree bindings.
-
-config BUILTIN_DTB_SOURCE
- string "Source file for builtin DTB"
- default ""
- depends on USE_BUILTIN_DTB
- help
- Base name (without suffix, relative to arch/sh/boot/dts) for the
- a DTS file that will be used to produce the DTB linked into the
- kernel.
-
-config ZERO_PAGE_OFFSET
- hex
- default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
- SH_7751_SOLUTION_ENGINE
- default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00001000"
- help
- This sets the default offset of zero page.
-
-config BOOT_LINK_OFFSET
- hex
- default "0x00210000" if SH_SHMIN
- default "0x00810000" if SH_7780_SOLUTION_ENGINE
- default "0x009e0000" if SH_TITAN
- default "0x01800000" if SH_SDK7780
- default "0x02000000" if SH_EDOSK7760
- default "0x00800000"
- help
- This option allows you to set the link address offset of the zImage.
- This can be useful if you are on a board which has a small amount of
- memory.
-
-config ENTRY_OFFSET
- hex
- default "0x00001000" if PAGE_SIZE_4KB
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00004000" if PAGE_SIZE_16KB
- default "0x00010000" if PAGE_SIZE_64KB
- default "0x00000000"
-
-config ROMIMAGE_MMCIF
- bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
- depends on CPU_SUBTYPE_SH7724
- help
- Say Y here to include experimental MMCIF loading code in
- romImage. With this enabled it is possible to write the romImage
- kernel image to an MMC card and boot the kernel straight from
- the reset vector. At reset the processor Mask ROM will load the
- first part of the romImage which in turn loads the rest the kernel
- image to RAM using the MMCIF hardware block.
-
-choice
- prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- help
- Setting this option allows the kernel command line arguments
- to be set.
-
-config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
- help
- Given string will overwrite any arguments passed in by
- a bootloader.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- Given string will be concatenated with arguments passed in
- by a bootloader.
-
-endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
-endmenu
-
-menu "Bus options"
-
-config SUPERHYWAY
- tristate "SuperHyway Bus support"
- depends on CPU_SUBTYPE_SH4_202
-
-config MAPLE
- bool "Maple Bus support"
- depends on SH_DREAMCAST
- help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
-
-endmenu
-
-menu "Power management options (EXPERIMENTAL)"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
deleted file mode 100644
index fff419f3d7574c..00000000000000
--- a/arch/sh/Kconfig.cpu
+++ /dev/null
@@ -1,100 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Processor features"
-
-choice
- prompt "Endianness selection"
- default CPU_LITTLE_ENDIAN
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
-
-config CPU_BIG_ENDIAN
- bool "Big Endian"
-
-endchoice
-
-config SH_FPU
- def_bool y
- prompt "FPU support"
- depends on CPU_HAS_FPU
- help
- Selecting this option will enable support for SH processors that
- have FPU units (ie, SH77xx).
-
- This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
- def_bool n
- prompt "FPU emulation support"
- depends on !SH_FPU
- help
- Selecting this option will enable support for software FPU emulation.
- Most SH-3 users will want to say Y here, whereas most SH-4 users will
- want to say N.
-
-config SH_DSP
- def_bool y
- prompt "DSP support"
- depends on CPU_HAS_DSP
- help
- Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
- This option must be set in order to enable the DSP.
-
-config SH_ADC
- def_bool y
- prompt "ADC support"
- depends on CPU_SH3
- help
- Selecting this option will allow the Linux kernel to use SH3 on-chip
- ADC module.
-
- If unsure, say N.
-
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
- help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
- bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
- help
- This enables support for a speculative instruction fetch for
- subroutine return. There are various pitfalls associated with
- this, as outlined in the SH7780 hardware manual.
-
- If unsure, say N.
-
-config CPU_HAS_INTEVT
- bool
-
-config CPU_HAS_IPR_IRQ
- bool
-
-config CPU_HAS_SR_RB
- bool
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.rst> for further
- information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEAEX
- bool
-
-config CPU_HAS_DSP
- bool
-
-config CPU_HAS_FPU
- bool
-
-endmenu
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
deleted file mode 100644
index 10290e5c1f4387..00000000000000
--- a/arch/sh/Kconfig.debug
+++ /dev/null
@@ -1,78 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config SH_STANDARD_BIOS
- bool "Use LinuxSH standard BIOS"
- help
- Say Y here if your target has the gdb-sh-stub
- package from www.m17n.org (or any conforming standard LinuxSH BIOS)
- in FLASH or EPROM. The kernel will use standard BIOS calls during
- boot for various housekeeping tasks (including calls to read and
- write characters to a system console, get a MAC address from an
- on-board Ethernet interface, and shut down the hardware). Note this
- does not work with machines with an existing operating system in
- mask ROM and no flash (WindowsCE machines fall in this category).
- If unsure, say N.
-
-config STACK_DEBUG
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit. Saying Y here will add overhead to
- every function call and will therefore incur a major
- performance hit. Most users should say N.
-
-config 4KSTACKS
- bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
- help
- If you say Y here the kernel will use a 4Kb stacksize for the
- kernel stack attached to each process/thread. This facilitates
- running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- depends on DEBUG_KERNEL && BROKEN
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-config DUMP_CODE
- bool "Show disassembly of nearby code in register dumps"
- depends on DEBUG_KERNEL
- default y if DEBUG_BUGVERBOSE
- default n
- help
- This prints out a code trace of the instructions leading up to
- the faulting instruction as a debugging aid. As this does grow
- the kernel in size a bit, most users will want to say N here.
-
- Those looking for more verbose debugging output should say Y.
-
-config DWARF_UNWINDER
- bool "Enable the DWARF unwinder for stacktraces"
- depends on DEBUG_KERNEL
- select FRAME_POINTER
- default n
- help
- Enabling this option will make stacktraces more accurate, at
- the cost of an increase in overall kernel size.
-
-config SH_NO_BSS_INIT
- bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
- depends on DEBUG_KERNEL
- default n
- help
- If running in painfully slow environments, such as an RTL
- simulation or from remote memory via SHdebug, where the memory
- can already be guaranteed to ber zeroed on boot, say Y.
-
- For all other cases, say N. If this option seems perplexing, or
- you aren't sure, say N.
-
-config MCOUNT
- def_bool y
- depends on STACK_DEBUG || FUNCTION_TRACER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
deleted file mode 100644
index 5c8776482530c3..00000000000000
--- a/arch/sh/Makefile
+++ /dev/null
@@ -1,215 +0,0 @@
-#
-# arch/sh/Makefile
-#
-# Copyright (C) 1999 Kaz Kojima
-# Copyright (C) 2002 - 2008 Paul Mundt
-# Copyright (C) 2002 M. R. Brown
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-ifdef cross_compiling
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
- endif
-endif
-
-KBUILD_DEFCONFIG := shx3_defconfig
-
-isa-y := any
-isa-$(CONFIG_SH_DSP) := sh
-isa-$(CONFIG_CPU_SH2) := sh2
-isa-$(CONFIG_CPU_SH2A) := sh2a
-isa-$(CONFIG_CPU_SH3) := sh3
-isa-$(CONFIG_CPU_SH4) := sh4
-isa-$(CONFIG_CPU_SH4A) := sh4a
-isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
-
-isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
-isa-y := $(isa-y)-up
-
-cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
-cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,)
-cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
- $(call cc-option,-m2a-nofpu,) \
- $(call cc-option,-m4-nofpu,)
-cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,)
-cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
- $(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
- $(call cc-option,-m4a-nofpu,)
-cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,)
-
-ifeq ($(cflags-y),)
-#
-# In the case where we are stuck with a compiler that has been uselessly
-# restricted to a particular ISA, a favourite default of newer GCCs when
-# extensive multilib targets are not provided, ensure we get the best fit
-# regarding FP generation. This is intentionally stupid (albeit many
-# orders of magnitude less than GCC's default behaviour), as anything
-# with a large number of multilib targets better have been built
-# correctly for the target in mind.
-#
-cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
- grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
-# At this point, anything goes.
-isaflags-y := $(call as-option,-Wa$(comma)-isa=any,)
-else
-#
-# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
-# support it, while -Wa,-dsp by itself limits the range of usable opcodes
-# on certain CPU subtypes. Try the ISA variant first, and if that fails,
-# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
-# opcodes, we always want the best ISA tuning the version of binutils
-# will provide.
-#
-isaflags-y := $(call as-option,-Wa$(comma)-isa=$(isa-y),)
-
-isaflags-$(CONFIG_SH_DSP) := \
- $(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
-endif
-
-cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
-
-cflags-y += $(call cc-option,-mno-fdpic)
-cflags-y += $(isaflags-y) -ffreestanding
-
-OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
- -R .stab -R .stabstr -S
-
-# Give the various platforms the opportunity to set default image types
-defaultimage-y := zImage
-defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
-defaultimage-$(CONFIG_SH_RSK) := uImage
-defaultimage-$(CONFIG_SH_URQUELL) := uImage
-defaultimage-$(CONFIG_SH_MIGOR) := uImage
-defaultimage-$(CONFIG_SH_AP325RXA) := uImage
-defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
-defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
-defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
-defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
-
-# Set some sensible Kbuild defaults
-boot := arch/sh/boot
-KBUILD_IMAGE := $(boot)/$(defaultimage-y)
-
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking.
-#
-UTS_MACHINE := sh
-LDFLAGS_vmlinux += -e _stext
-
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-ld-bfd := elf32-sh-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EL
-else
-ld-bfd := elf32-shbig-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EB
-endif
-
-export ld-bfd
-
-# Mach groups
-machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
-machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
-machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
-machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
-machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
-machdir-$(CONFIG_SH_MIGOR) += mach-migor
-machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
-machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
-machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
-machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
-machdir-$(CONFIG_SH_SDK7786) += mach-sdk7786
-machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
-machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
-machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
-machdir-$(CONFIG_SH_LANDISK) += mach-landisk
-machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
-machdir-$(CONFIG_SH_RSK) += mach-rsk
-
-ifneq ($(machdir-y),)
-core-y += $(addprefix arch/sh/boards/, \
- $(filter-out ., $(patsubst %,%/,$(machdir-y))))
-endif
-
-# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
-machdir-y += mach-common
-
-# Companion chips
-core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-
-#
-# CPU header paths
-#
-# These are ordered by optimization level. A CPU family that is a subset
-# of another (ie, SH-2A / SH-2), is picked up first, with increasing
-# levels of genericness if nothing more suitable is situated in the
-# hierarchy.
-#
-# As an example, in order of preference, SH-2A > SH-2 > common definitions.
-#
-cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a
-cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
-cpuincdir-y += cpu-common # Must be last
-
-drivers-y += arch/sh/drivers/
-
-cflags-y += $(foreach d, $(cpuincdir-y), -I $(srctree)/arch/sh/include/$(d)) \
- $(foreach d, $(machdir-y), -I $(srctree)/arch/sh/include/$(d))
-
-KBUILD_CFLAGS += -pipe $(cflags-y)
-KBUILD_CPPFLAGS += $(cflags-y)
-KBUILD_AFLAGS += $(cflags-y)
-
-ifeq ($(CONFIG_MCOUNT),y)
- KBUILD_CFLAGS += -pg
-endif
-
-ifeq ($(CONFIG_DWARF_UNWINDER),y)
- KBUILD_CFLAGS += -fasynchronous-unwind-tables
-endif
-
-libs-y := arch/sh/lib/ $(libs-y)
-
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
- uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
- romImage
-PHONY += $(BOOT_TARGETS)
-
-all: $(notdir $(KBUILD_IMAGE))
-
-$(BOOT_TARGETS): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-compressed: zImage
-
-archprepare:
- $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h
-
-archheaders:
- $(Q)$(MAKE) $(build)=arch/sh/kernel/syscalls all
-
-define archhelp
- @echo ' zImage - Compressed kernel image'
- @echo ' romImage - Compressed ROM image, if supported'
- @echo ' vmlinux.srec - Create an ELF S-record'
- @echo ' vmlinux.bin - Create an uncompressed binary image'
- @echo '* uImage - Alias to bootable U-Boot image'
- @echo ' uImage.srec - Create an S-record for U-Boot'
- @echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
- @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
- @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
- @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
- @echo ' uImage.xz - Kernel-only image for U-Boot (xz)'
- @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
-endef
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
deleted file mode 100644
index 83bcb6d2dacadd..00000000000000
--- a/arch/sh/boards/Kconfig
+++ /dev/null
@@ -1,400 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_ALPHA_BOARD
- bool
-
-config SH_CUSTOM_CLK
- def_bool y
- depends on !SH_DEVICE_TREE
- select HAVE_LEGACY_CLK
-
-config SH_DEVICE_TREE
- bool
- select OF
- select OF_EARLY_FLATTREE
- select TIMER_OF
- select COMMON_CLK
- select GENERIC_CALIBRATE_DELAY
-
-config SH_JCORE_SOC
- bool "J-Core SoC"
- select SH_DEVICE_TREE
- select CLKSRC_JCORE_PIT
- select JCORE_AIC
- depends on CPU_J2
- help
- Select this option to include drivers core components of the
- J-Core SoC, including interrupt controllers and timers.
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7724_SOLUTION_ENGINE
- bool "SolutionEngine7724"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select 7724 SolutionEngine if configuring for a Hitachi SH7724
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- select IO_TRAPPED if MMU
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK
- bool "Renesas Starter Kit"
- depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select HAVE_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_SDK7786
- bool "SDK7786"
- depends on CPU_SUBTYPE_SH7786
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
- select HAVE_SRAM_POOL
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select SDK7786 if configuring for a Renesas Technology Europe
- SH7786-65nm board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select HAVE_PCI
- select IO_TRAPPED if MMU
-
-config SH_SH7757LCR
- bool "SH7757LCR"
- depends on CPU_SUBTYPE_SH7757
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select HAVE_PCI
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR && 29BIT
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_SH7785LCR_PT
- bool "SH7785LCR prototype board on 32-bit MMU mode"
- depends on SH_SH7785LCR && 32BIT
- default n
- help
- If you use prototype board, this option is enabled.
-
-config SH_URQUELL
- bool "Urquell"
- depends on CPU_SUBTYPE_SH7786
- select GPIOLIB
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_KFR2R09
- bool "KFR2R09"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- "Kit For R2R for 2009" support.
-
-config SH_ECOVEC
- bool "EcoVec"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_DA7210 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "R0P7724LC0011/21RL (EcoVec)" support.
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_ESPT
- bool "ESPT"
- depends on CPU_SUBTYPE_SH7763
- help
- Select ESPT if configuring for a Renesas SH7763
- with gigabit ether evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_EDOSK7760
- bool "EDOSK7760"
- depends on CPU_SUBTYPE_SH7760
- help
- Select if configuring for a Renesas EDOSK7760
- evaluation board.
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
- select NO_IOPORT_MAP if !PCI
- select IRQ_DOMAIN
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_POLARIS
- bool "SMSC Polaris"
- select CPU_HAS_IPR_IRQ
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7709
- help
- Select if configuring for an SMSC Polaris development board
-
-config SH_SH2007
- bool "SH-2007 board"
- select NO_IOPORT_MAP
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7780
- help
- SH-2007 is a single-board computer based around SH7780 chip
- intended for embedded applications.
- It has an Ethernet interface (SMC9118), direct connected
- Compact Flash socket, two serial ports and PC-104 bus.
- More information at <http://sh2000.sh-linux.org>.
-
-config SH_APSH4A3A
- bool "AP-SH4A-3A"
- select SH_ALPHA_BOARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7785
- help
- Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
-
-config SH_APSH4AD0A
- bool "AP-SH4AD-0A"
- select SH_ALPHA_BOARD
- select HAVE_PCI
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7786
- help
- Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
-
-source "arch/sh/boards/mach-r2d/Kconfig"
-source "arch/sh/boards/mach-highlander/Kconfig"
-source "arch/sh/boards/mach-sdk7780/Kconfig"
-source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-rsk/Kconfig"
-
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int "Magic Panel R2 Version"
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
-
-endmenu
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
deleted file mode 100644
index 4002a22a7c409b..00000000000000
--- a/arch/sh/boards/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Specific board support, not covered by a mach group.
-#
-obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
-obj-$(CONFIG_SH_SH2007) += board-sh2007.o
-obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
-obj-$(CONFIG_SH_URQUELL) += board-urquell.o
-obj-$(CONFIG_SH_SHMIN) += board-shmin.o
-obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o
-obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
-obj-$(CONFIG_SH_ESPT) += board-espt.o
-obj-$(CONFIG_SH_POLARIS) += board-polaris.o
-obj-$(CONFIG_SH_TITAN) += board-titan.o
-obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o
-obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o
-obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o
-
-obj-$(CONFIG_SH_DEVICE_TREE) += of-generic.o
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
deleted file mode 100644
index abf19a947df354..00000000000000
--- a/arch/sh/boards/board-apsh4a3a.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4A-3A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01000000 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4a3a_devices[] __initdata = {
- &nor_flash_device,
- &smsc911x_device,
-};
-
-static int __init apsh4a3a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4a3a_devices,
- ARRAY_SIZE(apsh4a3a_devices));
-}
-device_initcall(apsh4a3a_devices_setup);
-
-static int apsh4a3a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4a3a_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
-}
-
-static void __init apsh4a3a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int apsh4a3a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value &= ~MODE_PIN0; /* Clock Mode 16 */
- value &= ~MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value |= MODE_PIN4;
- value &= ~MODE_PIN5; /* 16-bit Area0 bus width */
- value |= MODE_PIN6; /* Area 0 SRAM interface */
- value |= MODE_PIN7;
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN10; /* Crystal resonator */
- value |= MODE_PIN11; /* Display Unit */
- value |= MODE_PIN12;
- value &= ~MODE_PIN13; /* 29-bit address mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4a3a __initmv = {
- .mv_name = "AP-SH4A-3A",
- .mv_setup = apsh4a3a_setup,
- .mv_clk_init = apsh4a3a_clk_init,
- .mv_init_irq = apsh4a3a_init_irq,
- .mv_mode_pins = apsh4a3a_mode_pins,
-};
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
deleted file mode 100644
index fa031a16c9b5c7..00000000000000
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4AD-0A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4ad0a_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init apsh4ad0a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4ad0a_devices,
- ARRAY_SIZE(apsh4ad0a_devices));
-}
-device_initcall(apsh4ad0a_devices_setup);
-
-static int apsh4ad0a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode 3 */
- value |= MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value &= ~MODE_PIN4; /* 16-bit Area0 bus width */
- value |= MODE_PIN5;
- value |= MODE_PIN6;
- value |= MODE_PIN7; /* Normal mode */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Crystal resonator */
- value &= ~MODE_PIN10; /* 29-bit address mode */
- value &= ~MODE_PIN11; /* PCI-E Root port */
- value &= ~MODE_PIN12; /* 4 lane + 1 lane */
- value |= MODE_PIN13; /* AUD Enable */
- value &= ~MODE_PIN14; /* Normal Operation */
-
- return value;
-}
-
-static int apsh4ad0a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4ad0a_setup(char **cmdline_p)
-{
- pr_info("Alpha Project AP-SH4AD-0A support:\n");
-}
-
-static void __init apsh4ad0a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4ad0a __initmv = {
- .mv_name = "AP-SH4AD-0A",
- .mv_setup = apsh4ad0a_setup,
- .mv_mode_pins = apsh4ad0a_mode_pins,
- .mv_clk_init = apsh4ad0a_clk_init,
- .mv_init_irq = apsh4ad0a_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
deleted file mode 100644
index 0de7d603da2d8c..00000000000000
--- a/arch/sh/boards/board-edosk7705.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-#define ETHERNET_IRQ evt2irq(0x320)
-
-static void __init sh_edosk7705_init_irq(void)
-{
- make_imask_irq(ETHERNET_IRQ);
-}
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ETHERNET_IRQ,
- .end = ETHERNET_IRQ,
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7705_devices[] __initdata = {
- &smc91x_dev,
-};
-
-static int __init init_edosk7705_devices(void)
-{
- return platform_add_devices(edosk7705_devices,
- ARRAY_SIZE(edosk7705_devices));
-}
-device_initcall(init_edosk7705_devices);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
- .mv_name = "EDOSK7705",
- .mv_init_irq = sh_edosk7705_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c
deleted file mode 100644
index 7569d85c5ff5a8..00000000000000
--- a/arch/sh/boards/board-edosk7760.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas Europe EDOSK7760 Board Support
- *
- * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
- * Author: Luca Santini <luca.santini@spesonline.com>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/i2c.h>
-#include <linux/mtd/physmap.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-#include <asm/delay.h>
-#include <asm/i2c-sh7760.h>
-#include <linux/sizes.h>
-
-/* Bus state controller registers for CS4 area */
-#define BSC_CS4BCR 0xA4FD0010
-#define BSC_CS4WCR 0xA4FD0030
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-/* NOR flash */
-static struct mtd_partition edosk7760_nor_flash_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "fs",
- .offset = MTDPART_OFS_APPEND,
- .size = (26 << 20),
- }, {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data edosk7760_nor_flash_data = {
- .width = 4,
- .parts = edosk7760_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(edosk7760_nor_flash_partitions),
-};
-
-static struct resource edosk7760_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00000000 + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device edosk7760_nor_flash_device = {
- .name = "physmap-flash",
- .resource = edosk7760_nor_flash_resources,
- .num_resources = ARRAY_SIZE(edosk7760_nor_flash_resources),
- .dev = {
- .platform_data = &edosk7760_nor_flash_data,
- },
-};
-
-/* i2c initialization functions */
-static struct sh7760_i2c_platdata i2c_pd = {
- .speed_khz = 400,
-};
-
-static struct resource sh7760_i2c1_res[] = {
- {
- .start = SH7760_I2C1_MMIO,
- .end = SH7760_I2C1_MMIOEND,
- .flags = IORESOURCE_MEM,
- },{
- .start = evt2irq(0x9e0),
- .end = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c1_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
-
- .name = SH7760_I2C_DEVNAME,
- .id = 1,
- .resource = sh7760_i2c1_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c1_res),
-};
-
-static struct resource sh7760_i2c0_res[] = {
- {
- .start = SH7760_I2C0_MMIO,
- .end = SH7760_I2C0_MMIOEND,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x9c0),
- .end = evt2irq(0x9c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c0_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
- .name = SH7760_I2C_DEVNAME,
- .id = 0,
- .resource = sh7760_i2c0_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c0_res),
-};
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x2a0),
- .end = evt2irq(0x2a0),
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7760_devices[] __initdata = {
- &smc91x_dev,
- &edosk7760_nor_flash_device,
- &sh7760_i2c0_dev,
- &sh7760_i2c1_dev,
-};
-
-static int __init init_edosk7760_devices(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-
- return platform_add_devices(edosk7760_devices,
- ARRAY_SIZE(edosk7760_devices));
-}
-device_initcall(init_edosk7760_devices);
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_edosk7760 __initmv = {
- .mv_name = "EDOSK7760",
-};
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
deleted file mode 100644
index 6e784b5cf5a0b2..00000000000000
--- a/arch/sh/boards/board-espt.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Data Technology Inc. ESPT-GIGA board support
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* NOR Flash */
-static struct mtd_partition espt_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * SZ_128K),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * SZ_128K),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data espt_nor_flash_data = {
- .width = 2,
- .parts = espt_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
-};
-
-static struct resource espt_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device espt_nor_flash_device = {
- .name = "physmap-flash",
- .resource = espt_nor_flash_resources,
- .num_resources = ARRAY_SIZE(espt_nor_flash_resources),
- .dev = {
- .platform_data = &espt_nor_flash_data,
- },
-};
-
-/* SH-Ether */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 0,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device espt_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-static struct platform_device *espt_devices[] __initdata = {
- &espt_nor_flash_device,
- &espt_eth_device,
-};
-
-static int __init espt_devices_setup(void)
-{
- return platform_add_devices(espt_devices,
- ARRAY_SIZE(espt_devices));
-}
-device_initcall(espt_devices_setup);
-
-static struct sh_machine_vector mv_espt __initmv = {
- .mv_name = "ESPT-GIGA",
-};
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
deleted file mode 100644
index 56bd386ff3b043..00000000000000
--- a/arch/sh/boards/board-magicpanelr2.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/magicpanel/setup.c
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Magic Panel Release 2 board setup
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/sh_intc.h>
-#include <mach/magicpanelr2.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7720.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
-
-/* Wait until reset finished. Timeout is 100ms. */
-static int __init ethernet_reset_finished(void)
-{
- int i;
-
- if (LAN9115_READY)
- return 1;
-
- for (i = 0; i < 10; ++i) {
- mdelay(10);
- if (LAN9115_READY)
- return 1;
- }
-
- return 0;
-}
-
-static void __init reset_ethernet(void)
-{
- /* PMDR: LAN_RESET=on */
- CLRBITS_OUTB(0x10, PORT_PMDR);
-
- udelay(200);
-
- /* PMDR: LAN_RESET=off */
- SETBITS_OUTB(0x10, PORT_PMDR);
-}
-
-static void __init setup_chip_select(void)
-{
- /* CS2: LAN (0x08000000 - 0x0bffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x36db0400, CS2BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x000003c0, CS2WCR);
-
- /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS4BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS4WCR);
-
- /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5ABCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5AWCR);
-
- /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5BBCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5BWCR);
-
- /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS6ABCR);
- /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- __raw_writel(0x001009C1, CS6AWCR);
-}
-
-static void __init setup_port_multiplexing(void)
-{
- /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
- * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
- */
- __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
-
- /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
- * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
- */
- __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
-
- /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
- * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
- */
- __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
-
- /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
- * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
- */
- __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
-
- /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
- * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
- */
- __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
-
- /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
- * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
- */
- __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
-
- /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
- * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
- */
- __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
-
- /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
- * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
- */
- __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
-
- /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
- * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
- */
- __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
-
- /* K7 (x); K6 (x); K5 (x); K4 (x);
- * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
- */
- __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
-
- /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
- * L3 TCK; L2 (x); L1 (x); L0 (x);
- */
- __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
-
- /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
- * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
- * M1 CS5B(CAN3_CS); M0 GPI+(nc);
- */
- __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
-
- /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
- * LAN_RESET=off, BUZZER=off, LCD_BL=off
- */
-#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- __raw_writeb(0x30, PORT_PMDR);
-#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- __raw_writeb(0xF0, PORT_PMDR);
-#else
-#error Unknown revision of PLATFORM_MP_R2
-#endif
-
- /* P7 (x); P6 (x); P5 (x);
- * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
- * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
- */
- __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- __raw_writeb(0x10, PORT_PPDR);
-
- /* R7 A25; R6 A24; R5 A23; R4 A22;
- * R3 A21; R2 A20; R1 A19; R0 A0;
- */
- gpio_request(GPIO_FN_A25, NULL);
- gpio_request(GPIO_FN_A24, NULL);
- gpio_request(GPIO_FN_A23, NULL);
- gpio_request(GPIO_FN_A22, NULL);
- gpio_request(GPIO_FN_A21, NULL);
- gpio_request(GPIO_FN_A20, NULL);
- gpio_request(GPIO_FN_A19, NULL);
- gpio_request(GPIO_FN_A0, NULL);
-
- /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
- * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
- */
- __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
-
- /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
- * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
- */
- __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
-
- /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
- * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
- */
- __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
-
- /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
- * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
- */
- __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
-}
-
-static void __init mpr2_setup(char **cmdline_p)
-{
- /* set Pin Select Register A:
- * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
- * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
- */
- __raw_writew(0xAABC, PORT_PSELA);
- /* set Pin Select Register B:
- * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
- * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
- */
- __raw_writew(0x3C00, PORT_PSELB);
- /* set Pin Select Register C:
- * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
- */
- __raw_writew(0x0000, PORT_PSELC);
- /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
- * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
- */
- __raw_writew(0x0000, PORT_PSELD);
- /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- __raw_writew(0x0101, PORT_UTRCTL);
- /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- __raw_writew(0xA5C0, PORT_UCLKCR_W);
-
- setup_chip_select();
-
- setup_port_multiplexing();
-
- reset_ethernet();
-
- printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
- CONFIG_SH_MAGIC_PANEL_R2_VERSION);
-
- if (ethernet_reset_finished() == 0)
- printk(KERN_WARNING "Ethernet not ready\n");
-}
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0xa8000000,
- .end = 0xabffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct mtd_partition mpr2_partitions[] = {
- /* Reserved for bootloader, read-only */
- {
- .name = "Bootloader",
- .offset = 0x00000000UL,
- .size = MPR2_MTD_BOOTLOADER_SIZE,
- .mask_flags = MTD_WRITEABLE,
- },
- /* Reserved for kernel image */
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MPR2_MTD_KERNEL_SIZE,
- },
- /* Rest is used for Flash FS */
- {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = mpr2_partitions,
- .nr_parts = ARRAY_SIZE(mpr2_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x2000000UL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-/*
- * Add all resources to the platform_device
- */
-
-static struct platform_device *mpr2_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &flash_device,
-};
-
-
-static int __init mpr2_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
-}
-device_initcall(mpr2_devices_setup);
-
-/*
- * Initialize IRQ setting
- */
-static void __init init_mpr2_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
-
- irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
- irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
- irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
- irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
- irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
- irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
-
- intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */
- intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */
- intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */
- intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_mpr2 __initmv = {
- .mv_name = "mpr2",
- .mv_setup = mpr2_setup,
- .mv_init_irq = init_mpr2_IRQ,
-};
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
deleted file mode 100644
index 3de7bac0190392..00000000000000
--- a/arch/sh/boards/board-polaris.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
- *
- * Polaris-specific resource declaration
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <cpu/gpio.h>
-#include <mach-se/mach/se.h>
-
-#define BCR2 (0xFFFFFF62)
-#define WCR2 (0xFFFFFF66)
-#define AREA5_WAIT_CTRL (0x1C00)
-#define WAIT_STATES_10 (0x7)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = PA_EXT5,
- .end = PA_EXT5 + 0x1fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = IRQ0_IRQ,
- .end = IRQ0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PORT_PCDR,
- .end = PORT_PCDR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *polaris_devices[] __initdata = {
- &smsc911x_device,
- &heartbeat_device,
-};
-
-static int __init polaris_initialise(void)
-{
- u16 wcr, bcr_mask;
-
- printk(KERN_INFO "Configuring Polaris external bus\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* Configure area 5 with 2 wait states */
- wcr = __raw_readw(WCR2);
- wcr &= (~AREA5_WAIT_CTRL);
- wcr |= (WAIT_STATES_10 << 10);
- __raw_writew(wcr, WCR2);
-
- /* Configure area 5 for 32-bit access */
- bcr_mask = __raw_readw(BCR2);
- bcr_mask |= 1 << 10;
- __raw_writew(bcr_mask, BCR2);
-
- return platform_add_devices(polaris_devices,
- ARRAY_SIZE(polaris_devices));
-}
-arch_initcall(polaris_initialise);
-
-static struct ipr_data ipr_irq_table[] = {
- /* External IRQs */
- { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
- { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRC
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "sh7709-ext",
- },
-};
-
-static void __init init_polaris_irq(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
-
-static struct sh_machine_vector mv_polaris __initmv = {
- .mv_name = "Polaris",
- .mv_init_irq = init_polaris_irq,
-};
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
deleted file mode 100644
index 603a82325c65f0..00000000000000
--- a/arch/sh/boards/board-secureedge5410.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <mach/secureedge5410.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <cpu/timer.h>
-
-unsigned short secureedge5410_ioport;
-
-/*
- * EraseConfig handling functions
- */
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
- printk("SnapGear: erase switch interrupt!\n");
-
- return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
- unsigned int irq = evt2irq(0x240);
-
- printk("SnapGear: EraseConfig init\n");
-
- /* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
- printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- irq);
- else
- printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- irq);
- return 0;
-}
-device_initcall(eraseconfig_init);
-
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-static void __init init_snapgear_IRQ(void)
-{
- printk("Setup SnapGear IRQ/IPR ...\n");
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
- .mv_name = "SnapGear SecureEdge5410",
- .mv_init_irq = init_snapgear_IRQ,
-};
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
deleted file mode 100644
index 6ea85e4808512f..00000000000000
--- a/arch/sh/boards/board-sh2007.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-2007 board support.
- *
- * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
- * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/io.h>
-#include <asm/machvec.h>
-#include <mach/sh2007.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-struct smsc911x_platform_config smc911x_info = {
- .flags = SMSC911X_USE_32BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct resource smsc9118_0_resources[] = {
- [0] = {
- .start = SMC0_BASE,
- .end = SMC0_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource smsc9118_1_resources[] = {
- [0] = {
- .start = SMC1_BASE,
- .end = SMC1_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x280),
- .end = evt2irq(0x280),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_0_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc9118_0_resources),
- .resource = smsc9118_0_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct platform_device smsc9118_1_device = {
- .name = "smsc911x",
- .id = 1,
- .num_resources = ARRAY_SIZE(smsc9118_1_resources),
- .resource = smsc9118_1_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct resource cf_resources[] = {
- [0] = {
- .start = CF_BASE + CF_OFFSET,
- .end = CF_BASE + CF_OFFSET + 0x0f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CF_BASE + CF_OFFSET + 0x206,
- .end = CF_BASE + CF_OFFSET + 0x20f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_device = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(cf_resources),
- .resource = cf_resources,
-};
-
-static struct platform_device *sh2007_devices[] __initdata = {
- &smsc9118_0_device,
- &smsc9118_1_device,
- &cf_device,
-};
-
-static int __init sh2007_io_init(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
- return 0;
-}
-subsys_initcall(sh2007_io_init);
-
-static void __init sh2007_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * Initialize the board
- */
-static void __init sh2007_setup(char **cmdline_p)
-{
- pr_info("SH-2007 Setup...");
-
- /* setup wait control registers for area 5 */
- __raw_writel(CS5BCR_D, CS5BCR);
- __raw_writel(CS5WCR_D, CS5WCR);
- __raw_writel(CS5PCR_D, CS5PCR);
-
- pr_cont(" done.\n");
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_sh2007 __initmv = {
- .mv_setup = sh2007_setup,
- .mv_name = "sh2007",
- .mv_init_irq = sh2007_init_irq,
-};
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
deleted file mode 100644
index f39c8196efdfd1..00000000000000
--- a/arch/sh/boards/board-sh7757lcr.c
+++ /dev/null
@@ -1,604 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas R0P7757LC0012RL Support.
- *
- * Copyright (C) 2009 - 2010 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/io.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <cpu/sh7757.h>
-#include <asm/heartbeat.h>
-
-static struct resource heartbeat_resource = {
- .start = 0xffec005c, /* PUDR */
- .end = 0xffec005c,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Fast Ethernet */
-#define GBECONT 0xffc10100
-#define GBECONT_RMII1 BIT(17)
-#define GBECONT_RMII0 BIT(16)
-static void sh7757_eth_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800)
- writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
- else
- writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
-}
-
-static struct resource sh_eth0_resources[] = {
- {
- .start = 0xfef00000,
- .end = 0xfef001ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth0_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth0_device = {
- .name = "sh7757-ether",
- .resource = sh_eth0_resources,
- .id = 0,
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .dev = {
- .platform_data = &sh7757_eth0_pdata,
- },
-};
-
-static struct resource sh_eth1_resources[] = {
- {
- .start = 0xfef00800,
- .end = 0xfef009ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth1_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth1_device = {
- .name = "sh7757-ether",
- .resource = sh_eth1_resources,
- .id = 1,
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .dev = {
- .platform_data = &sh7757_eth1_pdata,
- },
-};
-
-static void sh7757_eth_giga_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800) {
- gpio_set_value(GPIO_PTT4, 1);
- writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
- } else {
- gpio_set_value(GPIO_PTT4, 0);
- writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
- }
-}
-
-static struct resource sh_eth_giga0_resources[] = {
- {
- .start = 0xfee00000,
- .end = 0xfee007ff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2960),
- .end = evt2irq(0x2960),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
- .phy = 18,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga0_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga0_resources,
- .id = 2,
- .num_resources = ARRAY_SIZE(sh_eth_giga0_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga0_pdata,
- },
-};
-
-static struct resource sh_eth_giga1_resources[] = {
- {
- .start = 0xfee00800,
- .end = 0xfee00fff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2980),
- .end = evt2irq(0x2980),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
- .phy = 19,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga1_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga1_resources,
- .id = 3,
- .num_resources = ARRAY_SIZE(sh_eth_giga1_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga1_pdata,
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .start = 0xffcb0000,
- .end = 0xffcb00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1c60),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = evt2irq(0x1c80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI_RX,
- .capabilities = MMC_CAP_SD_HIGHSPEED,
-};
-
-static struct resource sdhi_resources[] = {
- [0] = {
- .start = 0xffe50000,
- .end = 0xffe500ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_resources),
- .resource = sdhi_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi_info,
- },
-};
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static struct renesas_usbhs_platform_info usb0_data = {
- .platform_callback = {
- .get_id = usbhs0_get_id,
- },
- .driver_param = {
- .buswait_bwait = 5,
- }
-};
-
-static struct resource usb0_resources[] = {
- [0] = {
- .start = 0xfe450000,
- .end = 0xfe4501ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x840),
- .end = evt2irq(0x840),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb0_device = {
- .name = "renesas_usbhs",
- .id = 0,
- .dev = {
- .platform_data = &usb0_data,
- },
- .num_resources = ARRAY_SIZE(usb0_resources),
- .resource = usb0_resources,
-};
-
-static struct platform_device *sh7757lcr_devices[] __initdata = {
- &heartbeat_device,
- &sh7757_eth0_device,
- &sh7757_eth1_device,
- &sh7757_eth_giga0_device,
- &sh7757_eth_giga1_device,
- &sh_mmcif_device,
- &sdhi_device,
- &usb0_device,
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .type = "m25px64",
-};
-
-static struct spi_board_info spi_board_info[] = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &spi_flash_data,
- },
-};
-
-static int __init sh7757lcr_devices_setup(void)
-{
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* RGMII (PTA) */
- gpio_request(GPIO_FN_ET0_MDC, NULL);
- gpio_request(GPIO_FN_ET0_MDIO, NULL);
- gpio_request(GPIO_FN_ET1_MDC, NULL);
- gpio_request(GPIO_FN_ET1_MDIO, NULL);
-
- /* ONFI (PTB, PTZ) */
- gpio_request(GPIO_FN_ON_NRE, NULL);
- gpio_request(GPIO_FN_ON_NWE, NULL);
- gpio_request(GPIO_FN_ON_NWP, NULL);
- gpio_request(GPIO_FN_ON_NCE0, NULL);
- gpio_request(GPIO_FN_ON_R_B0, NULL);
- gpio_request(GPIO_FN_ON_ALE, NULL);
- gpio_request(GPIO_FN_ON_CLE, NULL);
-
- gpio_request(GPIO_FN_ON_DQ7, NULL);
- gpio_request(GPIO_FN_ON_DQ6, NULL);
- gpio_request(GPIO_FN_ON_DQ5, NULL);
- gpio_request(GPIO_FN_ON_DQ4, NULL);
- gpio_request(GPIO_FN_ON_DQ3, NULL);
- gpio_request(GPIO_FN_ON_DQ2, NULL);
- gpio_request(GPIO_FN_ON_DQ1, NULL);
- gpio_request(GPIO_FN_ON_DQ0, NULL);
-
- /* IRQ8 to 0 (PTB, PTC) */
- gpio_request(GPIO_FN_IRQ8, NULL);
- gpio_request(GPIO_FN_IRQ7, NULL);
- gpio_request(GPIO_FN_IRQ6, NULL);
- gpio_request(GPIO_FN_IRQ5, NULL);
- gpio_request(GPIO_FN_IRQ4, NULL);
- gpio_request(GPIO_FN_IRQ3, NULL);
- gpio_request(GPIO_FN_IRQ2, NULL);
- gpio_request(GPIO_FN_IRQ1, NULL);
- gpio_request(GPIO_FN_IRQ0, NULL);
-
- /* SPI0 (PTD) */
- gpio_request(GPIO_FN_SP0_MOSI, NULL);
- gpio_request(GPIO_FN_SP0_MISO, NULL);
- gpio_request(GPIO_FN_SP0_SCK, NULL);
- gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP0_SS0, NULL);
- gpio_request(GPIO_FN_SP0_SS1, NULL);
- gpio_request(GPIO_FN_SP0_SS2, NULL);
- gpio_request(GPIO_FN_SP0_SS3, NULL);
-
- /* RMII 0/1 (PTE, PTF) */
- gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII0_TXD1, NULL);
- gpio_request(GPIO_FN_RMII0_TXD0, NULL);
- gpio_request(GPIO_FN_RMII0_TXEN, NULL);
- gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII0_RXD1, NULL);
- gpio_request(GPIO_FN_RMII0_RXD0, NULL);
- gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII1_TXD1, NULL);
- gpio_request(GPIO_FN_RMII1_TXD0, NULL);
- gpio_request(GPIO_FN_RMII1_TXEN, NULL);
- gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII1_RXD1, NULL);
- gpio_request(GPIO_FN_RMII1_RXD0, NULL);
- gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
-
- /* eMMC (PTG) */
- gpio_request(GPIO_FN_MMCCLK, NULL);
- gpio_request(GPIO_FN_MMCCMD, NULL);
- gpio_request(GPIO_FN_MMCDAT7, NULL);
- gpio_request(GPIO_FN_MMCDAT6, NULL);
- gpio_request(GPIO_FN_MMCDAT5, NULL);
- gpio_request(GPIO_FN_MMCDAT4, NULL);
- gpio_request(GPIO_FN_MMCDAT3, NULL);
- gpio_request(GPIO_FN_MMCDAT2, NULL);
- gpio_request(GPIO_FN_MMCDAT1, NULL);
- gpio_request(GPIO_FN_MMCDAT0, NULL);
-
- /* LPC (PTG, PTH, PTQ, PTU) */
- gpio_request(GPIO_FN_SERIRQ, NULL);
- gpio_request(GPIO_FN_LPCPD, NULL);
- gpio_request(GPIO_FN_LDRQ, NULL);
- gpio_request(GPIO_FN_WP, NULL);
- gpio_request(GPIO_FN_FMS0, NULL);
- gpio_request(GPIO_FN_LAD3, NULL);
- gpio_request(GPIO_FN_LAD2, NULL);
- gpio_request(GPIO_FN_LAD1, NULL);
- gpio_request(GPIO_FN_LAD0, NULL);
- gpio_request(GPIO_FN_LFRAME, NULL);
- gpio_request(GPIO_FN_LRESET, NULL);
- gpio_request(GPIO_FN_LCLK, NULL);
- gpio_request(GPIO_FN_LGPIO7, NULL);
- gpio_request(GPIO_FN_LGPIO6, NULL);
- gpio_request(GPIO_FN_LGPIO5, NULL);
- gpio_request(GPIO_FN_LGPIO4, NULL);
-
- /* SPI1 (PTH) */
- gpio_request(GPIO_FN_SP1_MOSI, NULL);
- gpio_request(GPIO_FN_SP1_MISO, NULL);
- gpio_request(GPIO_FN_SP1_SCK, NULL);
- gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP1_SS0, NULL);
- gpio_request(GPIO_FN_SP1_SS1, NULL);
-
- /* SDHI (PTI) */
- gpio_request(GPIO_FN_SD_WP, NULL);
- gpio_request(GPIO_FN_SD_CD, NULL);
- gpio_request(GPIO_FN_SD_CLK, NULL);
- gpio_request(GPIO_FN_SD_CMD, NULL);
- gpio_request(GPIO_FN_SD_D3, NULL);
- gpio_request(GPIO_FN_SD_D2, NULL);
- gpio_request(GPIO_FN_SD_D1, NULL);
- gpio_request(GPIO_FN_SD_D0, NULL);
-
- /* SCIF3/4 (PTJ, PTW) */
- gpio_request(GPIO_FN_RTS3, NULL);
- gpio_request(GPIO_FN_CTS3, NULL);
- gpio_request(GPIO_FN_TXD3, NULL);
- gpio_request(GPIO_FN_RXD3, NULL);
- gpio_request(GPIO_FN_RTS4, NULL);
- gpio_request(GPIO_FN_RXD4, NULL);
- gpio_request(GPIO_FN_TXD4, NULL);
- gpio_request(GPIO_FN_CTS4, NULL);
-
- /* SERMUX (PTK, PTL, PTO, PTV) */
- gpio_request(GPIO_FN_COM2_TXD, NULL);
- gpio_request(GPIO_FN_COM2_RXD, NULL);
- gpio_request(GPIO_FN_COM2_RTS, NULL);
- gpio_request(GPIO_FN_COM2_CTS, NULL);
- gpio_request(GPIO_FN_COM2_DTR, NULL);
- gpio_request(GPIO_FN_COM2_DSR, NULL);
- gpio_request(GPIO_FN_COM2_DCD, NULL);
- gpio_request(GPIO_FN_COM2_RI, NULL);
- gpio_request(GPIO_FN_RAC_RXD, NULL);
- gpio_request(GPIO_FN_RAC_RTS, NULL);
- gpio_request(GPIO_FN_RAC_CTS, NULL);
- gpio_request(GPIO_FN_RAC_DTR, NULL);
- gpio_request(GPIO_FN_RAC_DSR, NULL);
- gpio_request(GPIO_FN_RAC_DCD, NULL);
- gpio_request(GPIO_FN_RAC_TXD, NULL);
- gpio_request(GPIO_FN_COM1_TXD, NULL);
- gpio_request(GPIO_FN_COM1_RXD, NULL);
- gpio_request(GPIO_FN_COM1_RTS, NULL);
- gpio_request(GPIO_FN_COM1_CTS, NULL);
-
- writeb(0x10, 0xfe470000); /* SMR0: SerMux mode 0 */
-
- /* IIC (PTM, PTR, PTS) */
- gpio_request(GPIO_FN_SDA7, NULL);
- gpio_request(GPIO_FN_SCL7, NULL);
- gpio_request(GPIO_FN_SDA6, NULL);
- gpio_request(GPIO_FN_SCL6, NULL);
- gpio_request(GPIO_FN_SDA5, NULL);
- gpio_request(GPIO_FN_SCL5, NULL);
- gpio_request(GPIO_FN_SDA4, NULL);
- gpio_request(GPIO_FN_SCL4, NULL);
- gpio_request(GPIO_FN_SDA3, NULL);
- gpio_request(GPIO_FN_SCL3, NULL);
- gpio_request(GPIO_FN_SDA2, NULL);
- gpio_request(GPIO_FN_SCL2, NULL);
- gpio_request(GPIO_FN_SDA1, NULL);
- gpio_request(GPIO_FN_SCL1, NULL);
- gpio_request(GPIO_FN_SDA0, NULL);
- gpio_request(GPIO_FN_SCL0, NULL);
-
- /* USB (PTN) */
- gpio_request(GPIO_FN_VBUS_EN, NULL);
- gpio_request(GPIO_FN_VBUS_OC, NULL);
-
- /* SGPIO1/0 (PTN, PTO) */
- gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO1_DI, NULL);
- gpio_request(GPIO_FN_SGPIO1_DO, NULL);
- gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO0_DI, NULL);
- gpio_request(GPIO_FN_SGPIO0_DO, NULL);
-
- /* WDT (PTN) */
- gpio_request(GPIO_FN_SUB_CLKIN, NULL);
-
- /* System (PTT) */
- gpio_request(GPIO_FN_STATUS1, NULL);
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* PWMX (PTT) */
- gpio_request(GPIO_FN_PWMX1, NULL);
- gpio_request(GPIO_FN_PWMX0, NULL);
-
- /* R-SPI (PTV) */
- gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
- gpio_request(GPIO_FN_R_SPI_MISO, NULL);
- gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
-
- /* EVC (PTV, PTW) */
- gpio_request(GPIO_FN_EVENT7, NULL);
- gpio_request(GPIO_FN_EVENT6, NULL);
- gpio_request(GPIO_FN_EVENT5, NULL);
- gpio_request(GPIO_FN_EVENT4, NULL);
- gpio_request(GPIO_FN_EVENT3, NULL);
- gpio_request(GPIO_FN_EVENT2, NULL);
- gpio_request(GPIO_FN_EVENT1, NULL);
- gpio_request(GPIO_FN_EVENT0, NULL);
-
- /* LED for heartbeat */
- gpio_request(GPIO_PTU3, NULL);
- gpio_direction_output(GPIO_PTU3, 1);
- gpio_request(GPIO_PTU2, NULL);
- gpio_direction_output(GPIO_PTU2, 1);
- gpio_request(GPIO_PTU1, NULL);
- gpio_direction_output(GPIO_PTU1, 1);
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* control for MDIO of Gigabit Ethernet */
- gpio_request(GPIO_PTT4, NULL);
- gpio_direction_output(GPIO_PTT4, 1);
-
- /* control for eMMC */
- gpio_request(GPIO_PTT7, NULL); /* eMMC_RST# */
- gpio_direction_output(GPIO_PTT7, 0);
- gpio_request(GPIO_PTT6, NULL); /* eMMC_INDEX# */
- gpio_direction_output(GPIO_PTT6, 0);
- gpio_request(GPIO_PTT5, NULL); /* eMMC_PRST# */
- gpio_direction_output(GPIO_PTT5, 1);
-
- /* register SPI device information */
- spi_register_board_info(spi_board_info,
- ARRAY_SIZE(spi_board_info));
-
- /* General platform */
- return platform_add_devices(sh7757lcr_devices,
- ARRAY_SIZE(sh7757lcr_devices));
-}
-arch_initcall(sh7757lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7757lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/* Initialize the board */
-static void __init sh7757lcr_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
-}
-
-static int sh7757lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S3 (Low active).
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode: 1 */
-
- return value;
-}
-
-/* The Machine Vector */
-static struct sh_machine_vector mv_sh7757lcr __initmv = {
- .mv_name = "SH7757LCR",
- .mv_setup = sh7757lcr_setup,
- .mv_init_irq = init_sh7757lcr_IRQ,
- .mv_mode_pins = sh7757lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
deleted file mode 100644
index 77dad1e511b465..00000000000000
--- a/arch/sh/boards/board-sh7785lcr.c
+++ /dev/null
@@ -1,384 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. R0P7785LC0011RL Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pca-platform.h>
-#include <linux/i2c-algo-pca.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/gpio/machine.h>
-#include <mach/sh7785lcr.h>
-#include <cpu/sh7785.h>
-#include <asm/heartbeat.h>
-#include <asm/clock.h>
-#include <asm/bl_bit.h>
-
-/*
- * NOTE: This board has 2 physical memory maps.
- * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
- */
-static struct resource heartbeat_resource = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = R8A66597_ADDR,
- .end = R8A66597_ADDR + R8A66597_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = SM107_MEM_ADDR,
- .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SM107_REG_ADDR,
- .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x340),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode_crt = {
- .pixclock = 35714, /* 28MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct fb_videomode sm501_default_mode_pnl = {
- .pixclock = 40000, /* 25MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 2,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = 0,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_pnl,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT |
- SM501FB_FLAG_PANEL_NO_VBIASEN,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_crt,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = 0,
- .mclk = 84 * 1000000,
- .m1xclk = 112 * 1000000,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct resource i2c_proto_resources[] = {
- [0] = {
- .start = PCA9564_PROTO_32BIT_ADDR,
- .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c_resources[] = {
- [0] = {
- .start = PCA9564_ADDR,
- .end = PCA9564_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct gpiod_lookup_table i2c_gpio_table = {
- .dev_id = "i2c.0",
- .table = {
- GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
- .i2c_clock_speed = I2C_PCA_CON_330kHz,
- .timeout = HZ,
-};
-
-static struct platform_device i2c_device = {
- .name = "i2c-pca-platform",
- .id = -1,
- .dev = {
- .platform_data = &i2c_platform_data,
- },
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-static struct platform_device *sh7785lcr_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &r8a66597_usb_host_device,
- &sm501_device,
- &i2c_device,
-};
-
-static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static int __init sh7785lcr_devices_setup(void)
-{
- i2c_register_board_info(0, sh7785lcr_i2c_devices,
- ARRAY_SIZE(sh7785lcr_i2c_devices));
-
- if (mach_is_sh7785lcr_pt()) {
- i2c_device.resource = i2c_proto_resources;
- i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
- }
-
- gpiod_add_lookup_table(&i2c_gpio_table);
- return platform_add_devices(sh7785lcr_devices,
- ARRAY_SIZE(sh7785lcr_devices));
-}
-device_initcall(sh7785lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7785lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-static int sh7785lcr_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-static void sh7785lcr_power_off(void)
-{
- unsigned char *p;
-
- p = ioremap(PLD_POFCR, PLD_POFCR + 1);
- if (!p) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
- *p = 0x01;
- iounmap(p);
- set_bl_bit();
- while (1)
- cpu_relax();
-}
-
-/* Initialize the board */
-static void __init sh7785lcr_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
-
- printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
-
- pm_power_off = sh7785lcr_power_off;
-
- /* sm501 DRAM configuration */
- sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL);
- if (!sm501_reg) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
-
- writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
- iounmap(sm501_reg);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int sh7785lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S1 and S2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN4; /* Clock Mode 16 */
- value |= MODE_PIN5; /* 32-bit Area0 bus width */
- value |= MODE_PIN6; /* 32-bit Area0 bus width */
- value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7785lcr __initmv = {
- .mv_name = "SH7785LCR",
- .mv_setup = sh7785lcr_setup,
- .mv_clk_init = sh7785lcr_clk_init,
- .mv_init_irq = init_sh7785lcr_IRQ,
- .mv_mode_pins = sh7785lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
deleted file mode 100644
index 83296c0b75c45d..00000000000000
--- a/arch/sh/boards/board-shmin.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/shmin/setup.c
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * SHMIN Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/shmin.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-#define PFC_PHCR 0xa400010eUL
-#define INTC_ICR1 0xa4000010UL
-
-static void __init init_shmin_irq(void)
-{
- __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static void __init shmin_setup(char **cmdline_p)
-{
- __set_io_port_base(SHMIN_IO_BASE);
-}
-
-static struct sh_machine_vector mv_shmin __initmv = {
- .mv_name = "SHMIN",
- .mv_setup = shmin_setup,
- .mv_init_irq = init_shmin_irq,
-};
diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c
deleted file mode 100644
index 074a848d8b564d..00000000000000
--- a/arch/sh/boards/board-titan.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/titan/setup.c - Setup for Titan
- *
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static void __init init_titan_irq(void)
-{
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct sh_machine_vector mv_titan __initmv = {
- .mv_name = "Titan",
- .mv_init_irq = init_titan_irq,
-};
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
deleted file mode 100644
index dad2b3b40735cb..00000000000000
--- a/arch/sh/boards/board-urquell.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. SH7786 Urquell Support.
- *
- * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * Based on board-sh7785lcr.c
- * Copyright (C) 2008 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/sh_intc.h>
-#include <mach/urquell.h>
-#include <cpu/sh7786.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/smp-ops.h>
-
-/*
- * bit 1234 5678
- *----------------------------
- * SW1 0101 0010 -> Pck 33MHz version
- * (1101 0010) Pck 66MHz version
- * SW2 0x1x xxxx -> little endian
- * 29bit mode
- * SW47 0001 1000 -> CS0 : on-board flash
- * CS1 : SRAM, registers, LAN, PCMCIA
- * 38400 bps for SCIF1
- *
- * Address
- * 0x00000000 - 0x04000000 (CS0) Nor Flash
- * 0x04000000 - 0x04200000 (CS1) SRAM
- * 0x05000000 - 0x05800000 (CS1) on board register
- * 0x05800000 - 0x06000000 (CS1) LAN91C111
- * 0x06000000 - 0x06400000 (CS1) PCMCIA
- * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
- * 0x10000000 - 0x14000000 (CS4) PCIe
- * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
- * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
- * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
- * 0x1C000000 - (CS7) SH7786 Control register
- */
-
-/* HeartBeat */
-static struct resource heartbeat_resource = {
- .start = BOARDREG(SLEDR),
- .end = BOARDREG(SLEDR),
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x05800300,
- .end = 0x0580030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x360),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* Nor Flash */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct platform_device *urquell_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &nor_flash_device,
-};
-
-static int __init urquell_devices_setup(void)
-{
- /* USB */
- gpio_request(GPIO_FN_USB_OVC0, NULL);
- gpio_request(GPIO_FN_USB_PENC0, NULL);
-
- /* enable LAN */
- __raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
- UBOARDREG(IRL2MSKR));
-
- return platform_add_devices(urquell_devices,
- ARRAY_SIZE(urquell_devices));
-}
-device_initcall(urquell_devices_setup);
-
-static void urquell_power_off(void)
-{
- __raw_writew(0xa5a5, UBOARDREG(SRSTR));
-}
-
-static void __init urquell_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
-
-static int urquell_mode_pins(void)
-{
- return __raw_readw(UBOARDREG(MDSWMR));
-}
-
-static int urquell_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init urquell_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
-
- pm_power_off = urquell_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_urquell __initmv = {
- .mv_name = "Urquell",
- .mv_setup = urquell_setup,
- .mv_init_irq = urquell_init_irq,
- .mv_mode_pins = urquell_mode_pins,
- .mv_clk_init = urquell_clk_init,
-};
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
deleted file mode 100644
index dba5d0c202615a..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
deleted file mode 100644
index 541c82cc30b112..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * AP325RXA sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ap325rxa_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(ap325rxa_sdram_enter_end)
-
- .balign 4
-ENTRY(ap325rxa_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
deleted file mode 100644
index c77b5f00a66a3d..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ /dev/null
@@ -1,573 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas - AP-325RXA
- * (Compatible with Algo System ., LTD. - AP-320A)
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Author : Yusuke Goda <goda.yuske@renesas.com>
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7723.h>
-
-#include <linux/dma-map-ops.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct resource smsc9118_resources[] = {
- [0] = {
- .start = 0xb6080000,
- .end = 0xb60fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc9118_resources),
- .resource = smsc9118_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-/*
- * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
- * If this area erased, this board can not boot.
- */
-static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area0",
- .offset = MTDPART_OFS_APPEND,
- .size = ((7 * 1024 * 1024) + (512 * 1024)),
- }, {
- .name = "CPLD-Data",
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- .size = (1024 * 128 * 2),
- }, {
- .name = "free-area1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data ap325rxa_nor_flash_data = {
- .width = 2,
- .parts = ap325rxa_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
-};
-
-static struct resource ap325rxa_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device ap325rxa_nor_flash_device = {
- .name = "physmap-flash",
- .resource = ap325rxa_nor_flash_resources,
- .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
- .dev = {
- .platform_data = &ap325rxa_nor_flash_data,
- },
-};
-
-static struct mtd_partition nand_partition_info[] = {
- {
- .name = "nand_data",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct resource nand_flash_resources[] = {
- [0] = {
- .start = 0xa4530000,
- .end = 0xa45300ff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
- .parts = nand_partition_info,
- .nr_parts = ARRAY_SIZE(nand_partition_info),
- .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E,
- .has_hwecc = 1,
-};
-
-static struct platform_device nand_flash_device = {
- .name = "sh_flctl",
- .resource = nand_flash_resources,
- .num_resources = ARRAY_SIZE(nand_flash_resources),
- .dev = {
- .platform_data = &nand_flash_data,
- },
-};
-
-#define FPGA_LCDREG 0xB4100180
-#define FPGA_BKLREG 0xB4100212
-#define FPGA_LCDREG_VAL 0x0018
-#define PORT_MSELCRB 0xA4050182
-#define PORT_HIZCRC 0xA405015C
-#define PORT_DRVCRA 0xA405018A
-#define PORT_DRVCRB 0xA405018C
-
-static int ap320_wvga_set_brightness(int brightness)
-{
- if (brightness) {
- gpio_set_value(GPIO_PTS3, 0);
- __raw_writew(0x100, FPGA_BKLREG);
- } else {
- __raw_writew(0, FPGA_BKLREG);
- gpio_set_value(GPIO_PTS3, 1);
- }
-
- return 0;
-}
-
-static void ap320_wvga_power_on(void)
-{
- msleep(100);
-
- /* ASD AP-320/325 LCD ON */
- __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-}
-
-static void ap320_wvga_power_off(void)
-{
- /* ASD AP-320/325 LCD OFF */
- __raw_writew(0, FPGA_LCDREG);
-}
-
-static const struct fb_videomode ap325rxa_lcdc_modes[] = {
- {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 32,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB18,
- .clock_divider = 1,
- .lcd_modes = ap325rxa_lcdc_modes,
- .num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
- .panel_cfg = {
- .width = 152, /* 7.0 inch */
- .height = 91,
- .display_on = ap320_wvga_power_on,
- .display_off = ap320_wvga_power_off,
- },
- .bl_info = {
- .name = "sh_mobile_lcdc_bl",
- .max_brightness = 1,
- .set_brightness = ap320_wvga_set_brightness,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7723_pfc", GPIO_PTZ5, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = ov7725 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- },
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ap325rxa_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn3_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi0_cn3_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn3_device = {
- .name = "sh_mobile_sdhi",
- .id = 0, /* "sdhi0" clock */
- .num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
- .resource = sdhi0_cn3_resources,
- .dev = {
- .platform_data = &sdhi0_cn3_data,
- },
-};
-
-static struct resource sdhi1_cn7_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi1_cn7_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 1, /* "sdhi1" clock */
- .num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
- .resource = sdhi1_cn7_resources,
- .dev = {
- .platform_data = &sdhi1_cn7_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
- .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
-};
-
-static struct i2c_board_info ap325rxa_i2c_devices[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
-};
-
-static struct platform_device *ap325rxa_devices[] __initdata = {
- &smsc9118_device,
- &ap325rxa_nor_flash_device,
- &lcdc_device,
- &nand_flash_device,
- &sdhi0_cn3_device,
- &sdhi1_cn7_device,
-};
-
-extern char ap325rxa_sdram_enter_start;
-extern char ap325rxa_sdram_enter_end;
-extern char ap325rxa_sdram_leave_start;
-extern char ap325rxa_sdram_leave_end;
-
-static int __init ap325rxa_devices_setup(void)
-{
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &ap325rxa_sdram_enter_start,
- &ap325rxa_sdram_enter_end,
- &ap325rxa_sdram_leave_start,
- &ap325rxa_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
- regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* LD3 and LD4 LEDs */
- gpio_request(GPIO_PTX5, NULL); /* RUN */
- gpio_direction_output(GPIO_PTX5, 1);
- gpio_export(GPIO_PTX5, 0);
-
- gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
- gpio_direction_output(GPIO_PTX4, 0);
- gpio_export(GPIO_PTX4, 0);
-
- /* SW1 input */
- gpio_request(GPIO_PTF7, NULL); /* MODE */
- gpio_direction_input(GPIO_PTF7);
- gpio_export(GPIO_PTF7, 0);
-
- /* LCDC */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-
- /* LCD backlight */
- gpio_request(GPIO_PTS3, NULL);
- gpio_direction_output(GPIO_PTS3, 1);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- gpio_request(GPIO_PTZ7, NULL);
- gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
- gpio_request(GPIO_PTZ6, NULL);
- gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
- gpio_request(GPIO_PTZ5, NULL);
- gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
- gpio_request(GPIO_PTZ4, NULL);
- gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
-
- __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
-
- /* FLCTL */
- gpio_request(GPIO_FN_FCE, NULL);
- gpio_request(GPIO_FN_NAF7, NULL);
- gpio_request(GPIO_FN_NAF6, NULL);
- gpio_request(GPIO_FN_NAF5, NULL);
- gpio_request(GPIO_FN_NAF4, NULL);
- gpio_request(GPIO_FN_NAF3, NULL);
- gpio_request(GPIO_FN_NAF2, NULL);
- gpio_request(GPIO_FN_NAF1, NULL);
- gpio_request(GPIO_FN_NAF0, NULL);
- gpio_request(GPIO_FN_FCDE, NULL);
- gpio_request(GPIO_FN_FOE, NULL);
- gpio_request(GPIO_FN_FSC, NULL);
- gpio_request(GPIO_FN_FWE, NULL);
- gpio_request(GPIO_FN_FRB, NULL);
-
- __raw_writew(0, PORT_HIZCRC);
- __raw_writew(0xFFFF, PORT_DRVCRA);
- __raw_writew(0xFFFF, PORT_DRVCRB);
-
- /* SDHI0 - CN3 - SD CARD */
- gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
-
- /* SDHI1 - CN7 - MICRO SD CARD */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register RSTB gpio for ov7725 camera sensor. */
- gpiod_add_lookup_table(&ov7725_gpios);
-
- i2c_register_board_info(0, ap325rxa_i2c_devices,
- ARRAY_SIZE(ap325rxa_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&ap325rxa_ceu_device.dev);
- dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&ap325rxa_ceu_device);
-
- return platform_add_devices(ap325rxa_devices,
- ARRAY_SIZE(ap325rxa_devices));
-}
-arch_initcall(ap325rxa_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int ap325rxa_mode_pins(void)
-{
- /* MD0=0, MD1=0, MD2=0: Clock Mode 0
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=1: Test Mode Disabled
- */
- return MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init ap325rxa_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ap325rxa __initmv = {
- .mv_name = "AP-325RXA",
- .mv_mode_pins = ap325rxa_mode_pins,
- .mv_mem_reserve = ap325rxa_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
deleted file mode 100644
index 37b2452206aa21..00000000000000
--- a/arch/sh/boards/mach-dreamcast/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Sega Dreamcast specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
deleted file mode 100644
index cc06e4cdb4cdf9..00000000000000
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <mach/sysasic.h>
-
-/*
- * Dreamcast System ASIC Hardware Events -
- *
- * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
- * hardware events from system peripherals and triggering an SH7750 IRQ.
- * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
- * set in the Event Mask Registers (EMRs). When a hardware event is
- * triggered, its corresponding bit in the Event Status Registers (ESRs)
- * is set, and that bit should be rewritten to the ESR to acknowledge that
- * event.
- *
- * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908. Event
- * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
- * There are three groups of EMRs that parallel the ESRs. Each EMR group
- * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
- * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
- * triggers IRQ 9.
- *
- * In the kernel, these events are mapped to virtual IRQs so that drivers can
- * respond to them as they would a normal interrupt. In order to keep this
- * mapping simple, the events are mapped as:
- *
- * 6900/6910 - Events 0-31, IRQ 13
- * 6904/6924 - Events 32-63, IRQ 11
- * 6908/6938 - Events 64-95, IRQ 9
- *
- */
-
-#define ESR_BASE 0x005f6900 /* Base event status register */
-#define EMR_BASE 0x005f6910 /* Base event mask register */
-
-/*
- * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
- * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
- */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit position within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/*
- * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
- * (logically mapped to the corresponding bit for the hardware event).
- */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask &= ~(1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask |= (1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void mask_ack_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
- disable_systemasic_irq(data);
- outl((1 << EVENT_BIT(irq)), esr);
-}
-
-struct irq_chip systemasic_int = {
- .name = "System ASIC",
- .irq_mask = disable_systemasic_irq,
- .irq_mask_ack = mask_ack_systemasic_irq,
- .irq_unmask = enable_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
- __u32 emr, esr, status, level;
- __u32 j, bit;
-
- switch (irq) {
- case 13:
- level = 0;
- break;
- case 11:
- level = 1;
- break;
- case 9:
- level = 2;
- break;
- default:
- return irq;
- }
- emr = EMR_BASE + (level << 4) + (level << 2);
- esr = ESR_BASE + (level << 2);
-
- /* Mask the ESR to filter any spurious, unwanted interrupts */
- status = inl(esr);
- status &= inl(emr);
-
- /* Now scan and find the first set bit as the event to map */
- for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
- if (status & bit) {
- irq = HW_EVENT_IRQ_BASE + j + (level << 5);
- return irq;
- }
- }
-
- /* Not reached */
- return irq;
-}
-
-void systemasic_irq_init(void)
-{
- int irq_base, i;
-
- irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
- HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs\n", __func__);
- return;
- }
-
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
-}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
deleted file mode 100644
index 7873cd27e4e008..00000000000000
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- */
-
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
- seconds) to get the standard Unix Epoch when getting the time, and add
- 20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
- registers.*/
-#define AICA_RTC_SECS_H 0xa0710000
-#define AICA_RTC_SECS_L 0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @dev: the RTC device (ignored)
- * @tm: pointer to resulting RTC time structure
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-static int aica_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t t;
-
- do {
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- /* normalize to 1970..2106 time range */
- t = (u32)(val1 - TWENTY_YEARS);
-
- rtc_time64_to_tm(t, tm);
-
- return 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @dev: the RTC device (ignored)
- * @tm: pointer to new RTC time structure
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-static int aica_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t secs = rtc_tm_to_time64(tm);
- u32 adj = secs + TWENTY_YEARS;
-
- do {
- __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
-
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- return 0;
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = aica_rtc_gettimeofday,
- .set_time = aica_rtc_settimeofday,
-};
-
-static int __init aica_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(aica_time_init);
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
deleted file mode 100644
index 2d966c1c2cc188..00000000000000
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * This file originally bore the message (with enclosed-$):
- * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- * SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <mach/sysasic.h>
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
- .mv_name = "Sega Dreamcast",
- .mv_setup = dreamcast_setup,
- .mv_irq_demux = systemasic_irq_demux,
- .mv_init_irq = systemasic_irq_init,
-};
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
deleted file mode 100644
index d78d4904ddee32..00000000000000
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the R0P7724LC0011/21RL (EcoVec)
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-obj-y := setup.o sdram.o
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
deleted file mode 100644
index d2f269169abb94..00000000000000
--- a/arch/sh/boards/mach-ecovec24/sdram.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Ecovec24 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ecovec24_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ecovec24_sdram_enter_end)
-
- .balign 4
-ENTRY(ecovec24_sdram_leave_start)
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- /* DBSC: put memory in auto-refresh mode */
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-
-ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
deleted file mode 100644
index 674da7ebd8b7f5..00000000000000
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ /dev/null
@@ -1,1521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/suspend.h>
-#include <cpu/sh7724.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/platform_data/tsc2007.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/spi/sh_msiof.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/mt9t112.h>
-#include <media/i2c/tw9910.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * Address Interface BusWidth
- *-----------------------------------------
- * 0x0000_0000 uboot 16bit
- * 0x0004_0000 Linux romImage 16bit
- * 0x0014_0000 MTD for Linux 16bit
- * 0x0400_0000 Internal I/O 16/32bit
- * 0x0800_0000 DRAM 32bit
- * 0x1800_0000 MFI 16bit
- */
-
-/* SWITCH
- *------------------------------
- * DS2[1] = FlashROM write protect ON : write protect
- * OFF : No write protect
- * DS2[2] = RMII / TS, SCIF ON : RMII
- * OFF : TS, SCIF3
- * DS2[3] = Camera / Video ON : Camera
- * OFF : NTSC/PAL (IN)
- * DS2[5] = NTSC_OUT Clock ON : On board OSC
- * OFF : SH7724 DV_CLK
- * DS2[6-7] = MMC / SD ON-OFF : SD
- * OFF-ON : MMC
- */
-
-/*
- * FSI - DA7210
- *
- * it needs amixer settings for playing
- *
- * amixer set 'HeadPhone' 80
- * amixer set 'Out Mixer Left DAC Left' on
- * amixer set 'Out Mixer Right DAC Right' on
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/* Heartbeat */
-static unsigned char led_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .nr_bits = 4,
- .bit_pos = led_pos,
-};
-
-static struct resource heartbeat_resource = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "boot loader",
- .offset = 0,
- .size = (5 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8700 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .ether_link_active_low = 1
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-/* USB0 host */
-static void usb0_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB4, power);
-}
-
-static struct r8a66597_platdata usb0_host_data = {
- .on_chip = 1,
- .port_power = usb0_port_power,
-};
-
-static struct resource usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(usb0_host_resources),
- .resource = usb0_host_resources,
-};
-
-/* USB1 host/function */
-static void usb1_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB5, power);
-}
-
-static struct r8a66597_platdata usb1_common_data = {
- .on_chip = 1,
- .port_power = usb1_port_power,
-};
-
-static struct resource usb1_common_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb1_common_device = {
- /* .name will be added in arch_setup */
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_common_data,
- },
- .num_resources = ARRAY_SIZE(usb1_common_resources),
- .resource = usb1_common_resources,
-};
-
-/*
- * USBHS
- */
-static int usbhs_get_id(struct platform_device *pdev)
-{
- return gpio_get_value(GPIO_PTB3);
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
- /* enable vbus if HOST */
- if (!gpio_get_value(GPIO_PTB3))
- gpio_set_value(GPIO_PTB5, 1);
-
- return 0;
-}
-
-static struct renesas_usbhs_platform_info usbhs_info = {
- .platform_callback = {
- .get_id = usbhs_get_id,
- .phy_reset = usbhs_phy_reset,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .detection_delay = 5,
- .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
- .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
- .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
- .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
- },
-};
-
-static struct resource usbhs_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs_device = {
- .name = "renesas_usbhs",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbhs_info,
- },
- .num_resources = ARRAY_SIZE(usbhs_resources),
- .resource = usbhs_resources,
-};
-
-/* LCDC and backlight */
-static const struct fb_videomode ecovec_lcd_modes[] = {
- {
- .name = "Panel",
- .xres = 800,
- .yres = 480,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 70,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static const struct fb_videomode ecovec_dvi_modes[] = {
- {
- .name = "DVI",
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .ch[0] = {
- .interface_type = RGB18,
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-static struct gpiod_lookup_table gpio_backlight_lookup = {
- .dev_id = "gpio-backlight.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct property_entry gpio_backlight_props[] = {
- PROPERTY_ENTRY_BOOL("default-on"),
- { }
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
-};
-
-static const struct platform_device_info gpio_backlight_device_info = {
- .name = "gpio-backlight",
- .data = &gpio_backlight_data,
- .size_data = sizeof(gpio_backlight_data),
- .properties = gpio_backlight_props,
-};
-
-static struct platform_device *gpio_backlight_device;
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x3c,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x3c,
- },
- },
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* ceu.1 */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* Power up/down GPIOs for camera devices and video decoder */
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTU2, "pdn", GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_0_gpios = {
- .dev_id = "0-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA3, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_1_gpios = {
- .dev_id = "1-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA4, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* I2C device */
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct mt9t112_platform_data mt9t112_0_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct mt9t112_platform_data mt9t112_1_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("da7210", 0x1a),
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
- {
- /* 1st camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_0_pdata,
- },
-};
-
-static struct i2c_board_info i2c1_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
- {
- I2C_BOARD_INFO("lis3lv02d", 0x1c),
- .irq = evt2irq(0x620),
- },
- {
- /* 2nd camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_1_pdata,
- },
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .kycr2_delay = 100,
- .keycodes = { KEY_1, 0, 0, 0, 0,
- KEY_2, 0, 0, 0, 0,
- KEY_3, 0, 0, 0, 0,
- KEY_4, 0, 0, 0, 0,
- KEY_5, 0, 0, 0, 0,
- KEY_6, 0, 0, 0, 0, },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* keysc0 clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* TouchScreen */
-#define IRQ0 evt2irq(0x600)
-
-static int ts_get_pendown_state(struct device *dev)
-{
- int val = 0;
- gpio_free(GPIO_FN_INTC_IRQ0);
- gpio_request(GPIO_PTZ0, NULL);
- gpio_direction_input(GPIO_PTZ0);
-
- val = gpio_get_value(GPIO_PTZ0);
-
- gpio_free(GPIO_PTZ0);
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
-
- return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = ts_get_pendown_state,
- .init_platform_hw = ts_init,
-};
-
-static struct i2c_board_info ts_i2c_clients = {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
- .platform_data = &tsc2007_info,
- .irq = IRQ0,
-};
-
-static struct regulator_consumer_supply cn12_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn12_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
- .consumer_supplies = cn12_power_consumers,
-};
-
-static struct fixed_voltage_config cn12_power_info = {
- .supply_name = "CN12 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &cn12_power_init_data,
-};
-
-static struct platform_device cn12_power = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &cn12_power_info,
- },
-};
-
-static struct gpiod_lookup_table cn12_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- /* Offset 7 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
-/* SDHI0 */
-static struct regulator_consumer_supply sdhi0_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data sdhi0_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
- .consumer_supplies = sdhi0_power_consumers,
-};
-
-static struct fixed_voltage_config sdhi0_power_info = {
- .supply_name = "CN11 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &sdhi0_power_init_data,
-};
-
-static struct platform_device sdhi0_power = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &sdhi0_power_info,
- },
-};
-
-static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.1",
- .table = {
- /* Offset 6 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table sdhi0_gpio_table = {
- .dev_id = "sh_mobile_sdhi.0",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTY7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct tmio_mmc_data sdhi0_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct resource sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct gpiod_lookup_table sdhi1_gpio_table = {
- .dev_id = "sh_mobile_sdhi.1",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTW7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct resource sdhi1_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
- .id = 1,
- .dev = {
- .platform_data = &sdhi1_info,
- },
-};
-#endif /* CONFIG_MMC_SH_MMCIF */
-
-#else
-
-/* MMC SPI */
-static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
-{
- gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
-}
-
-static struct mmc_spi_platform_data mmc_spi_info = {
- .caps = MMC_CAP_NEEDS_POLL,
- .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
- .setpower = mmc_spi_setpower,
-};
-
-static struct gpiod_lookup_table mmc_spi_gpio_table = {
- .dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */
- .table = {
- /* Card detect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0,
- GPIO_ACTIVE_LOW),
- /* Write protect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1,
- GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "mmc_spi",
- .platform_data = &mmc_spi_info,
- .max_speed_hz = 5000000,
- .mode = SPI_MODE_0,
- },
-};
-
-/* MSIOF0 */
-static struct sh_msiof_spi_info msiof0_data = {
- .num_chipselect = 1,
-};
-
-static struct resource msiof0_resources[] = {
- [0] = {
- .name = "MSIOF0",
- .start = 0xa4c40000,
- .end = 0xa4c40063,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device msiof0_device = {
- .name = "spi_sh_msiof",
- .id = 0, /* MSIOF0 */
- .dev = {
- .platform_data = &msiof0_data,
- },
- .num_resources = ARRAY_SIZE(msiof0_resources),
- .resource = msiof0_resources,
-};
-
-static struct gpiod_lookup_table msiof_gpio_table = {
- .dev_id = "spi_sh_msiof.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTM4, "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#endif
-
-/* FSI */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_da7210_info = {
- .name = "DA7210",
- .card = "FSIB-DA7210",
- .codec = "da7210.0-001a",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsib-dai",
- },
- .codec_dai = {
- .name = "da7210-hifi",
- },
-};
-
-static struct platform_device fsi_da7210_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_da7210_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
- },
-};
-
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "SH_MMCIF",
- .start = 0xA4CA0000,
- .end = 0xA4CA00FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* MMC2I */
- .start = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* MMC3I */
- .start = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0, /* SH7724: Max Pclk/2 */
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-#endif
-
-static struct platform_device *ecovec_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ecovec_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &sh_eth_device,
- &usb0_host_device,
- &usb1_common_device,
- &usbhs_device,
- &lcdc_device,
- &keysc_device,
- &cn12_power,
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- &sdhi0_power,
- &sdhi0_device,
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sdhi1_device,
-#endif
-#else
- &msiof0_device,
-#endif
- &fsi_device,
- &fsi_da7210_device,
- &irda_device,
- &vou_device,
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sh_mmcif_device,
-#endif
-};
-
-#ifdef CONFIG_I2C
-#define EEPROM_ADDR 0x50
-static u8 mac_read(struct i2c_adapter *a, u8 command)
-{
- struct i2c_msg msg[2];
- u8 buf;
- int ret;
-
- msg[0].addr = EEPROM_ADDR;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = &command;
-
- msg[1].addr = EEPROM_ADDR;
- msg[1].flags = I2C_M_RD;
- msg[1].len = 1;
- msg[1].buf = &buf;
-
- ret = i2c_transfer(a, msg, 2);
- if (ret < 0) {
- printk(KERN_ERR "error %d\n", ret);
- buf = 0xff;
- }
-
- return buf;
-}
-
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- struct i2c_adapter *a = i2c_get_adapter(1);
- int i;
-
- if (!a) {
- pr_err("can not get I2C 1\n");
- return;
- }
-
- /* read MAC address from EEPROM */
- for (i = 0; i < sizeof(pd->mac_addr); i++) {
- pd->mac_addr[i] = mac_read(a, 0x10 + i);
- msleep(10);
- }
-
- i2c_put_adapter(a);
-}
-#else
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- pr_err("unable to read sh_eth MAC address\n");
-}
-#endif
-
-#define PORT_HIZA 0xA4050158
-#define IODRIVEA 0xA405018A
-
-extern char ecovec24_sdram_enter_start;
-extern char ecovec24_sdram_enter_end;
-extern char ecovec24_sdram_leave_start;
-extern char ecovec24_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- struct clk *clk;
- bool cn12_enabled = false;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ecovec24_sdram_enter_start,
- &ecovec24_sdram_enter_end,
- &ecovec24_sdram_leave_start,
- &ecovec24_sdram_leave_end);
-
- /* enable STATUS0, STATUS2 and PDSTATUS */
- gpio_request(GPIO_FN_STATUS0, NULL);
- gpio_request(GPIO_FN_STATUS2, NULL);
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable SCIFA0 */
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
-
- /* enable debug LED */
- gpio_request(GPIO_PTG0, NULL);
- gpio_request(GPIO_PTG1, NULL);
- gpio_request(GPIO_PTG2, NULL);
- gpio_request(GPIO_PTG3, NULL);
- gpio_direction_output(GPIO_PTG0, 0);
- gpio_direction_output(GPIO_PTG1, 0);
- gpio_direction_output(GPIO_PTG2, 0);
- gpio_direction_output(GPIO_PTG3, 0);
- __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
-
- /* enable SH-Eth */
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_output(GPIO_PTA1, 1);
- mdelay(20);
-
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_FN_LNKSTA, NULL);
-
- /* enable USB */
- __raw_writew(0x0000, 0xA4D80000);
- __raw_writew(0x0000, 0xA4D90000);
- gpio_request(GPIO_PTB3, NULL);
- gpio_request(GPIO_PTB4, NULL);
- gpio_request(GPIO_PTB5, NULL);
- gpio_direction_input(GPIO_PTB3);
- gpio_direction_output(GPIO_PTB4, 0);
- gpio_direction_output(GPIO_PTB5, 0);
- __raw_writew(0x0600, 0xa40501d4);
- __raw_writew(0x0600, 0xa4050192);
-
- if (gpio_get_value(GPIO_PTB3)) {
- printk(KERN_INFO "USB1 function is selected\n");
- usb1_common_device.name = "r8a66597_udc";
- } else {
- printk(KERN_INFO "USB1 host is selected\n");
- usb1_common_device.name = "r8a66597_hcd";
- }
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- gpio_request(GPIO_PTE6, NULL);
- gpio_request(GPIO_PTU1, NULL);
- gpio_request(GPIO_PTA2, NULL);
- gpio_direction_input(GPIO_PTE6);
- gpio_direction_output(GPIO_PTU1, 0);
- gpio_direction_output(GPIO_PTA2, 0);
-
- /* I/O buffer drive ability is high */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
-
- if (gpio_get_value(GPIO_PTE6)) {
- /* DVI */
- lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1;
- lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes);
-
- /* No backlight */
- gpio_backlight_data.fbdev = NULL;
-
- gpio_set_value(GPIO_PTA2, 1);
- gpio_set_value(GPIO_PTU1, 1);
- } else {
- /* Panel */
- lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2;
- lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes);
-
- /* FIXME
- *
- * LCDDON control is needed for Panel,
- * but current sh_mobile_lcdc driver doesn't control it.
- * It is temporary correspondence
- */
- gpio_request(GPIO_PTF4, NULL);
- gpio_direction_output(GPIO_PTF4, 1);
-
- /* enable TouchScreen */
- i2c_register_board_info(0, &ts_i2c_clients, 1);
- irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
- }
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* enable KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
-
- /* enable user debug switch */
- gpio_request(GPIO_PTR0, NULL);
- gpio_request(GPIO_PTR4, NULL);
- gpio_request(GPIO_PTR5, NULL);
- gpio_request(GPIO_PTR6, NULL);
- gpio_direction_input(GPIO_PTR0);
- gpio_direction_input(GPIO_PTR4);
- gpio_direction_input(GPIO_PTR5);
- gpio_direction_input(GPIO_PTR6);
-
- /* SD-card slot CN11 */
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
-#else
- /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
- gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
- gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
- gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
-
- gpiod_add_lookup_table(&mmc_spi_gpio_table);
- gpiod_add_lookup_table(&msiof_gpio_table);
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-#endif
-
- /* MMC/SD-card slot CN12 */
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
- gpio_request(GPIO_FN_MMC_D7, NULL);
- gpio_request(GPIO_FN_MMC_D6, NULL);
- gpio_request(GPIO_FN_MMC_D5, NULL);
- gpio_request(GPIO_FN_MMC_D4, NULL);
- gpio_request(GPIO_FN_MMC_D3, NULL);
- gpio_request(GPIO_FN_MMC_D2, NULL);
- gpio_request(GPIO_FN_MMC_D1, NULL);
- gpio_request(GPIO_FN_MMC_D0, NULL);
- gpio_request(GPIO_FN_MMC_CLK, NULL);
- gpio_request(GPIO_FN_MMC_CMD, NULL);
-
- cn12_enabled = true;
-#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
-
- cn12_enabled = true;
-#endif
-
- if (cn12_enabled)
- /* I/O buffer drive ability is high for CN12 */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
- IODRIVEA);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI B */
- clk = clk_get(NULL, "fsib_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimckb_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimckb_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 0);
- mdelay(20);
-
- /* enable motion sensor */
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_direction_input(GPIO_FN_INTC_IRQ1);
-
- /* set VPU clock to 166 MHz */
- clk = clk_get(NULL, "vpu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 166000000));
- clk_put(clk);
- }
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
- gpio_request(GPIO_PTU5, NULL);
- gpio_direction_output(GPIO_PTU5, 0);
-
- /* Register gpio lookup tables for cameras and video decoder */
- gpiod_add_lookup_table(&tw9910_gpios);
- gpiod_add_lookup_table(&mt9t112_0_gpios);
- gpiod_add_lookup_table(&mt9t112_1_gpios);
-
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
-
- i2c_register_board_info(1, i2c1_devices,
- ARRAY_SIZE(i2c1_devices));
-
-#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* AK8813 power / reset sequence */
- gpio_request(GPIO_PTG4, NULL);
- gpio_request(GPIO_PTU3, NULL);
- /* Reset */
- gpio_direction_output(GPIO_PTG4, 0);
- /* Power down */
- gpio_direction_output(GPIO_PTU3, 1);
-
- udelay(10);
-
- /* Power up, reset */
- gpio_set_value(GPIO_PTU3, 0);
-
- udelay(10);
-
- /* Remove reset */
- gpio_set_value(GPIO_PTG4, 1);
-#endif
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ecovec_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[0]);
-
- device_initialize(&ecovec_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[1]);
-
- gpiod_add_lookup_table(&cn12_power_gpiod_table);
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
- gpiod_add_lookup_table(&sdhi0_gpio_table);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- gpiod_add_lookup_table(&sdhi1_gpio_table);
-#endif
-#endif
-
- gpiod_add_lookup_table(&gpio_backlight_lookup);
- gpio_backlight_device = platform_device_register_full(
- &gpio_backlight_device_info);
- if (IS_ERR(gpio_backlight_device))
- return PTR_ERR(gpio_backlight_device);
-
- return platform_add_devices(ecovec_devices,
- ARRAY_SIZE(ecovec_devices));
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- sh_eth_init(&sh_eth_plat);
- return 0;
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ecovec_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ecovec __initmv = {
- .mv_name = "R0P7724 (EcoVec)",
- .mv_mem_reserve = ecovec_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
deleted file mode 100644
index b0abd03cac4e57..00000000000000
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_HIGHLANDER
-
-choice
- prompt "Highlander options"
- default SH_R7780MP
-
-config SH_R7780RP
- bool "R7780RP-1 board support"
- depends on CPU_SUBTYPE_SH7780
-
-config SH_R7780MP
- bool "R7780MP board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the mass-production
- version of the R7780RP. If in doubt, say Y.
-
-config SH_R7785RP
- bool "R7785RP board support"
- depends on CPU_SUBTYPE_SH7785
- select GPIOLIB
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile
deleted file mode 100644
index 880ed68138b00f..00000000000000
--- a/arch/sh/boards/mach-highlander/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Highlander specific parts of the kernel
-#
-obj-y := setup.o
-obj-$(CONFIG_SH_R7780RP) += irq-r7780rp.o
-obj-$(CONFIG_SH_R7780MP) += irq-r7780mp.o
-obj-$(CONFIG_SH_R7785RP) += irq-r7785rp.o pinmux-r7785rp.o
-
-ifneq ($(CONFIG_SH_R7785RP),y)
-obj-$(CONFIG_PUSH_SWITCH) += psw.o
-endif
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
deleted file mode 100644
index f46637377b6a18..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780MP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- CF, /* Compact Flash */
- TP, /* Touch panel */
- SCIF1, /* FPGA SCIF1 */
- SCIF0, /* FPGA SCIF0 */
- SMBUS, /* SMBUS */
- RTC, /* RTC Alarm */
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
-
- /* external bus connector */
- EXT1, EXT2, EXT4, EXT5, EXT6,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(SCIF1, IRQ_SCIF1),
- INTC_IRQ(SCIF0, IRQ_SCIF0),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(AX88796, IRQ_AX88796),
- INTC_IRQ(PSW, IRQ_PSW),
-
- INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
- 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
- IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
- IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
- 0, IRQ_AX88796, IRQ_PSW,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
- printk(KERN_INFO "Using r7780mp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
deleted file mode 100644
index c61177e8724ba7..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780RP-1 Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
-
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
- CF, /* Compact Flash */
-
- PCI_A,
- PCI_B,
- PCI_C,
- PCI_D,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
- INTC_IRQ(PCI_B, 66),
- INTC_IRQ(PCI_C, 67),
- INTC_IRQ(PCI_D, 68),
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(PSW, IRQ_PSW),
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa5000000, 0, 16, /* IRLMSK */
- { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 65, 66, 67, 68,
- IRQ_CF, 0, 0, 0,
- 0, 0, 0, 0,
- IRQ_AX88796, IRQ_PSW
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if (__raw_readw(0xa5000600)) {
- printk(KERN_INFO "Using r7780rp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
deleted file mode 100644
index 0ebebbed0d63fb..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7785RP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 - 2008 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* FPGA specific interrupt sources */
- CF, /* Compact Flash */
- SMBUS, /* SMBUS */
- TP, /* Touch panel */
- RTC, /* RTC Alarm */
- TH_ALERT, /* Temperature sensor */
- AX88796, /* Ethernet controller */
-
- /* external bus connector */
- EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
-
- INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
- INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
-
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
-
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000010, 0, 16, /* IRLMCR1 */
- { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
- RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
- { 0xa4000012, 0, 16, /* IRLMCR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
- IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
- IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
- IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
- return NULL;
-
- printk(KERN_INFO "Using r7785rp interrupt controller.\n");
-
- __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
-
- /* Setup the FPGA IRL */
- __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
- __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
- __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
- __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
- __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
- __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
-
- register_intc_controller(&intc_desc);
- return irl2irq;
-}
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
deleted file mode 100644
index 703179faf652b2..00000000000000
--- a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <cpu/sh7785.h>
-
-void __init highlander_plat_pinmux_setup(void)
-{
- /* SCIF0 */
- gpio_request(GPIO_FN_SCIF0_CTS, NULL);
- gpio_request(GPIO_FN_SCIF0_RTS, NULL);
- gpio_request(GPIO_FN_SCIF0_SCK, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
-}
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
deleted file mode 100644
index d445c54f74e440..00000000000000
--- a/arch/sh/boards/mach-highlander/psw.c
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/highlander.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int l, mask;
- int ret = 0;
-
- l = __raw_readw(PA_DBSW);
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- mask = l & 0x70;
- /* Figure out who raised it */
- if (mask & (1 << psw_info->bit)) {
- psw->state = !!(mask & (1 << psw_info->bit));
- if (psw->state) /* debounce */
- mod_timer(&psw->debounce, jiffies + 50);
-
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- l |= (0x7 << 12);
- __raw_writew(l, PA_DBSW);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
- [0] = {
- .start = IRQ_PSW,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info s2_platform_data = {
- .name = "s2",
- .bit = 6,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s2_platform_data,
- },
-};
-
-static struct push_switch_platform_info s3_platform_data = {
- .name = "s3",
- .bit = 5,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s3_platform_data,
- },
-};
-
-static struct push_switch_platform_info s4_platform_data = {
- .name = "s4",
- .bit = 4,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s4_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
deleted file mode 100644
index 533393d779c2b9..00000000000000
--- a/arch/sh/boards/mach-highlander/setup.c
+++ /dev/null
@@ -1,416 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/setup.c
- *
- * Renesas Solutions Highlander Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005 - 2008 Paul Mundt
- *
- * This contains support for the R7780RP-1, R7780MP, and R7785RP
- * Highlander modules.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/types.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/clkdev.h>
-#include <net/ax88796.h>
-#include <asm/machvec.h>
-#include <mach/highlander.h>
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xA4200000,
- .end = 0xA42000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EXT1, /* irq number */
- .end = IRQ_EXT1,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0xb0000000,
- .end = 0xb00000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- .start = IRQ_EXT4, /* irq number */
- .end = IRQ_EXT4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x08 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c + 0x16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CF,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OBLED,
- .end = PA_OBLED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-#ifndef CONFIG_SH_R7785RP
-static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-#endif
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
-
- /* R7785RP has a slightly more sensible FPGA.. */
-#ifndef CONFIG_SH_R7785RP
- .dev = {
- .platform_data = &heartbeat_data,
- },
-#endif
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct ax_plat_data ax88796_platdata = {
- .flags = AXFLG_HAS_93CX6,
- .wordlength = 2,
- .dcr_val = 0x1,
- .rcr_val = 0x40,
-};
-
-static struct resource ax88796_resources[] = {
- {
-#ifdef CONFIG_SH_R7780RP
- .start = 0xa5800400,
- .end = 0xa5800400 + (0x20 * 0x2) - 1,
-#else
- .start = 0xa4100400,
- .end = 0xa4100400 + (0x20 * 0x2) - 1,
-#endif
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_AX88796,
- .end = IRQ_AX88796,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ax88796_device = {
- .name = "ax88796",
- .id = 0,
-
- .dev = {
- .platform_data = &ax88796_platdata,
- },
-
- .num_resources = ARRAY_SIZE(ax88796_resources),
- .resource = ax88796_resources,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-/* This config is flash board for mass production. */
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = PA_NORFLASH_ADDR,
- .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct resource smbus_resources[] = {
- [0] = {
- .start = PA_SMCR,
- .end = PA_SMCR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SMBUS,
- .end = IRQ_SMBUS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smbus_device = {
- .name = "i2c-highlander",
- .id = 0,
- .num_resources = ARRAY_SIZE(smbus_resources),
- .resource = smbus_resources,
-};
-
-static struct i2c_board_info __initdata highlander_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static struct platform_device *r7780rp_devices[] __initdata = {
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &heartbeat_device,
- &smbus_device,
- &nor_flash_device,
-#ifndef CONFIG_SH_R7780RP
- &ax88796_device,
-#endif
-};
-
-/*
- * The CF is connected using a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init r7780rp_devices_setup(void)
-{
- int ret = 0;
-
-#ifndef CONFIG_SH_R7780RP
- if (register_trapped_io(&cf_trapped_io) == 0)
- ret |= platform_device_register(&cf_ide_device);
-#endif
-
- ret |= platform_add_devices(r7780rp_devices,
- ARRAY_SIZE(r7780rp_devices));
-
- ret |= i2c_register_board_info(0, highlander_i2c_devices,
- ARRAY_SIZE(highlander_i2c_devices));
-
- return ret;
-}
-device_initcall(r7780rp_devices_setup);
-
-/*
- * Platform specific clocks
- */
-static int ivdr_clk_enable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
- return 0;
-}
-
-static void ivdr_clk_disable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
-}
-
-static struct sh_clk_ops ivdr_clk_ops = {
- .enable = ivdr_clk_enable,
- .disable = ivdr_clk_disable,
-};
-
-static struct clk ivdr_clk = {
- .ops = &ivdr_clk_ops,
-};
-
-static struct clk *r7780rp_clocks[] = {
- &ivdr_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
-};
-
-static void r7780rp_power_off(void)
-{
- if (mach_is_r7780mp() || mach_is_r7785rp())
- __raw_writew(0x0001, PA_POFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init highlander_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(PA_VERREG);
- int i;
-
- printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
- mach_is_r7780rp() ? "R7780RP-1" :
- mach_is_r7780mp() ? "R7780MP" :
- "R7785RP");
-
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d)\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf);
-
- highlander_plat_pinmux_setup();
-
- /*
- * Enable the important clocks right away..
- */
- for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
- struct clk *clk = r7780rp_clocks[i];
-
- clk_register(clk);
- clk_enable(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
-
- if (mach_is_r7780rp())
- __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
-
- __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
-
- pm_power_off = r7780rp_power_off;
-}
-
-static unsigned char irl2irq[HL_NR_IRL];
-
-static int highlander_irq_demux(int irq)
-{
- if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-static void __init highlander_init_irq(void)
-{
- unsigned char *ucp = highlander_plat_irq_setup();
-
- if (ucp) {
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
- memcpy(irl2irq, ucp, HL_NR_IRL);
- }
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_highlander __initmv = {
- .mv_name = "Highlander",
- .mv_setup = highlander_setup,
- .mv_init_irq = highlander_init_irq,
- .mv_irq_demux = highlander_irq_demux,
-};
diff --git a/arch/sh/boards/mach-hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
deleted file mode 100644
index 4b0fe29e5612eb..00000000000000
--- a/arch/sh/boards/mach-hp6xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HP6xx specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_PM) += pm.o pm_wakeup.o
-obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
deleted file mode 100644
index e5c4c7d34139ea..00000000000000
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * bios-less APM driver for hp680
- *
- * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
- * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-#include <asm/adc.h>
-#include <mach/hp6xx.h>
-
-/* percentage values */
-#define APM_CRITICAL 10
-#define APM_LOW 30
-
-/* resonably sane values */
-#define HP680_BATTERY_MAX 898
-#define HP680_BATTERY_MIN 486
-#define HP680_BATTERY_AC_ON 1023
-
-#define MODNAME "hp6x0_apm"
-
-#define PGDR 0xa400012c
-
-static void hp6x0_apm_get_power_status(struct apm_power_info *info)
-{
- int battery, backup, charging, percentage;
- u8 pgdr;
-
- battery = adc_single(ADC_CHANNEL_BATTERY);
- backup = adc_single(ADC_CHANNEL_BACKUP);
- charging = adc_single(ADC_CHANNEL_CHARGE);
-
- percentage = 100 * (battery - HP680_BATTERY_MIN) /
- (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
-
- /* % of full battery */
- info->battery_life = percentage;
-
- /* We want our estimates in minutes */
- info->units = 0;
-
- /* Extremely(!!) rough estimate, we will replace this with a datalist later on */
- info->time = (2 * battery);
-
- info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
- APM_AC_ONLINE : APM_AC_OFFLINE;
-
- pgdr = __raw_readb(PGDR);
- if (pgdr & PGDR_MAIN_BATTERY_OUT) {
- info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
- info->battery_flag = 0x80;
- } else if (charging < 8) {
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- info->battery_flag = 0x08;
- info->ac_line_status = 0x01;
- } else if (percentage <= APM_CRITICAL) {
- info->battery_status = APM_BATTERY_STATUS_CRITICAL;
- info->battery_flag = 0x04;
- } else if (percentage <= APM_LOW) {
- info->battery_status = APM_BATTERY_STATUS_LOW;
- info->battery_flag = 0x02;
- } else {
- info->battery_status = APM_BATTERY_STATUS_HIGH;
- info->battery_flag = 0x01;
- }
-}
-
-static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
-{
- if (!APM_DISABLED)
- apm_queue_event(APM_USER_SUSPEND);
-
- return IRQ_HANDLED;
-}
-
-static int __init hp6x0_apm_init(void)
-{
- int ret;
-
- ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- 0, MODNAME, NULL);
- if (unlikely(ret < 0)) {
- printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
- HP680_BTN_IRQ);
- return ret;
- }
-
- apm_get_power_status = hp6x0_apm_get_power_status;
-
- return ret;
-}
-
-static void __exit hp6x0_apm_exit(void)
-{
- free_irq(HP680_BTN_IRQ, 0);
-}
-
-module_init(hp6x0_apm_init);
-module_exit(hp6x0_apm_exit);
-
-MODULE_AUTHOR("Adriy Skulysh");
-MODULE_DESCRIPTION("hp6xx Advanced Power Management");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
deleted file mode 100644
index fe505ec168d021..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/bl_bit.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-#include <asm/freq.h>
-#include <asm/watchdog.h>
-
-#define INTR_OFFSET 0x600
-
-#define STBCR 0xffffff82
-#define STBCR2 0xffffff88
-
-#define STBCR_STBY 0x80
-#define STBCR_MSTP2 0x04
-
-#define MCR 0xffffff68
-#define RTCNT 0xffffff70
-
-#define MCR_RMODE 2
-#define MCR_RFSH 4
-
-extern u8 wakeup_start;
-extern u8 wakeup_end;
-
-static void pm_enter(void)
-{
- u8 stbcr, csr;
- u16 frqcr, mcr;
- u32 vbr_new, vbr_old;
-
- set_bl_bit();
-
- /* set wdt */
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- csr |= WTCSR_CKS_4096;
- sh_wdt_write_csr(csr);
- csr = sh_wdt_read_csr();
- sh_wdt_write_cnt(0);
-
- /* disable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
- __raw_writew(frqcr, FRQCR);
-
- /* enable standby */
- stbcr = __raw_readb(STBCR);
- __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
-
- /* set self-refresh */
- mcr = __raw_readw(MCR);
- __raw_writew(mcr & ~MCR_RFSH, MCR);
-
- /* set interrupt handler */
- asm volatile("stc vbr, %0" : "=r" (vbr_old));
- vbr_new = get_zeroed_page(GFP_ATOMIC);
- udelay(50);
- memcpy((void*)(vbr_new + INTR_OFFSET),
- &wakeup_start, &wakeup_end - &wakeup_start);
- asm volatile("ldc %0, vbr" : : "r" (vbr_new));
-
- __raw_writew(0, RTCNT);
- __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
-
- cpu_sleep();
-
- asm volatile("ldc %0, vbr" : : "r" (vbr_old));
-
- free_page(vbr_new);
-
- /* enable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr |= FRQCR_PSTBY;
- __raw_writew(frqcr, FRQCR);
- udelay(50);
- frqcr |= FRQCR_PLLEN;
- __raw_writew(frqcr, FRQCR);
-
- __raw_writeb(stbcr, STBCR);
-
- clear_bl_bit();
-}
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
- u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
- u8 scr;
- u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
- outb(0, HD64461_PCC1CSCIER);
-
- scr = inb(HD64461_PCC1SCR);
- scr |= HD64461_PCCSCR_VCC1;
- outb(scr, HD64461_PCC1SCR);
-
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr |= HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
- __raw_writeb(0x1f, DACR);
-
- stbcr = __raw_readb(STBCR);
- __raw_writeb(0x01, STBCR);
-
- stbcr2 = __raw_readb(STBCR2);
- __raw_writeb(0x7f , STBCR2);
-
- outw(0xf07f, HD64461_SCPUCR);
-
- pm_enter();
-
- outw(0, HD64461_SCPUCR);
- __raw_writeb(stbcr, STBCR);
- __raw_writeb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-
- outb(0x4c, HD64461_PCC1CSCIER);
- outb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-static const struct platform_suspend_ops hp6x0_pm_ops = {
- .enter = hp6x0_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
- suspend_set_ops(&hp6x0_pm_ops);
- return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
deleted file mode 100644
index 0fd43301f083d0..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-
-#include <linux/linkage.h>
-#include <cpu/mmu_context.h>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * For more details, please have a look at entry.S
- */
-
-#define k0 r0
-#define k1 r1
-
-ENTRY(wakeup_start)
-! clear STBY bit
- mov #-126, k1
- and #127, k0
- mov.b k0, @k1
-! enable refresh
- mov.l 5f, k1
- mov.w 6f, k0
- mov.w k0, @k1
-! jump to handler
- mov.l 4f, k1
- jmp @k1
- nop
-
- .align 2
-4: .long handle_interrupt
-5: .long 0xffffff68
-6: .word 0x0524
-
-ENTRY(wakeup_end)
- nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
deleted file mode 100644
index 2ceead68d7bf82..00000000000000
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/sh_intc.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-#define SCPCR 0xa4000116
-#define SCPDR 0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x15000000 + 0x1f0,
- .end = 0x15000000 + 0x1f0 + 0x08 - 0x01,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x15000000 + 0x1fe,
- .end = 0x15000000 + 0x1fe + 0x01,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
- .name = "jornada680_kbd",
- .id = -1,
-};
-
-static void dac_audio_start(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker on */
- v = inw(HD64461_GPADR);
- v &= ~HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker on */
- v8 = inb(PKDR);
- v8 &= ~PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_enable(pdata->channel);
-}
-
-static void dac_audio_stop(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker off */
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker off */
- v8 = inb(PKDR);
- v8 |= PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_output(0, pdata->channel);
- sh_dac_disable(pdata->channel);
-}
-
-static struct dac_audio_pdata dac_audio_platform_data = {
- .buffer_size = 64000,
- .channel = 1,
- .start = dac_audio_start,
- .stop = dac_audio_stop,
-};
-
-static struct platform_device dac_audio_device = {
- .name = "dac_audio",
- .id = -1,
- .dev = {
- .platform_data = &dac_audio_platform_data,
- }
-
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
- &cf_ide_device,
- &jornadakbd_device,
- &dac_audio_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
- /* Gets touchscreen and powerbutton IRQ working */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
- return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
- u8 v8;
- u16 v;
-
- v = inw(HD64461_STBCR);
- v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
- HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
- HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
- HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
- HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
- v |= HD64461_STBCR_SPC1ST;
-#endif
- outw(v, HD64461_STBCR);
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
- outw(v, HD64461_GPADR);
-
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
- sh_dac_output(0, DAC_SPEAKER_VOLUME);
- sh_dac_disable(DAC_SPEAKER_VOLUME);
- v8 = __raw_readb(DACR);
- v8 &= ~DACR_DAE;
- __raw_writeb(v8,DACR);
-
- v8 = __raw_readb(SCPDR);
- v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
- v8 &= ~SCPDR_TS_SCAN_ENABLE;
- __raw_writeb(v8, SCPDR);
-
- v = __raw_readw(SCPCR);
- v &= ~SCPCR_TS_MASK;
- v |= SCPCR_TS_ENABLE;
- __raw_writew(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
- .mv_name = "hp6xx",
- .mv_setup = hp6xx_setup,
- /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
- .mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
deleted file mode 100644
index 4a4a35ad7ba07c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
-obj-y += lcd_wqvga.o
-endif
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
deleted file mode 100644
index f6bbac106d1328..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 LCD panel support
- *
- * Copyright (C) 2009 Magnus Damm
- *
- * Register settings based on the out-of-tree t33fb.c driver
- * Copyright (C) 2008 Lineo Solutions, Inc.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <mach/kfr2r09.h>
-#include <cpu/sh7724.h>
-
-/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
- * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
- * communicating with the main port of the LCDC using an 18-bit SYS interface.
- *
- * The device code for this LCD module is 0x01221517.
- */
-
-static const unsigned char data_frame_if[] = {
- 0x02, /* WEMODE: 1=cont, 0=one-shot */
- 0x00, 0x00,
- 0x00, /* EPF, DFM */
- 0x02, /* RIM[1] : 1 (18bpp) */
-};
-
-static const unsigned char data_panel[] = {
- 0x0b,
- 0x63, /* 400 lines */
- 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
-};
-
-static const unsigned char data_timing[] = {
- 0x00, 0x00, 0x13, 0x08, 0x08,
-};
-
-static const unsigned char data_timing_src[] = {
- 0x11, 0x01, 0x00, 0x01,
-};
-
-static const unsigned char data_gamma[] = {
- 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
- 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
-};
-
-static const unsigned char data_power[] = {
- 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
-};
-
-static unsigned long read_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- return so->read_data(sohandle);
-}
-
-static void write_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- int i, unsigned long v)
-{
- if (i)
- so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
- else
- so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
-}
-
-static void write_data(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- unsigned char const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i++)
- write_reg(sohandle, so, 1, data[i]);
-}
-
-static unsigned long read_device_code(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long device_code;
-
- /* access protect OFF */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* deep standby OFF */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* device code command */
- write_reg(sohandle, so, 0, 0xbf);
- mdelay(50);
-
- /* dummy read */
- read_reg(sohandle, so);
-
- /* read device code */
- device_code = ((read_reg(sohandle, so) & 0xff) << 24);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
- device_code |= (read_reg(sohandle, so) & 0xff);
-
- return device_code;
-}
-
-static void write_memory_start(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_reg(sohandle, so, 0, 0x2c);
-}
-
-static void clear_memory(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- int i;
-
- /* write start */
- write_memory_start(sohandle, so);
-
- /* paint it black */
- for (i = 0; i < (240 * 400); i++)
- write_reg(sohandle, so, 1, 0x00);
-}
-
-static void display_on(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* access protect off */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* exit deep standby mode */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* frame memory I/F */
- write_reg(sohandle, so, 0, 0xb3);
- write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
-
- /* display mode and frame memory write mode */
- write_reg(sohandle, so, 0, 0xb4);
- write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
-
- /* panel */
- write_reg(sohandle, so, 0, 0xc0);
- write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
-
- /* timing (normal) */
- write_reg(sohandle, so, 0, 0xc1);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (partial) */
- write_reg(sohandle, so, 0, 0xc2);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (idle) */
- write_reg(sohandle, so, 0, 0xc3);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (source/VCOM/gate driving) */
- write_reg(sohandle, so, 0, 0xc4);
- write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
-
- /* gamma (red) */
- write_reg(sohandle, so, 0, 0xc8);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (green) */
- write_reg(sohandle, so, 0, 0xc9);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (blue) */
- write_reg(sohandle, so, 0, 0xca);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* power (common) */
- write_reg(sohandle, so, 0, 0xd0);
- write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
-
- /* VCOM */
- write_reg(sohandle, so, 0, 0xd1);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x0f);
- write_reg(sohandle, so, 1, 0x02);
-
- /* power (normal) */
- write_reg(sohandle, so, 0, 0xd2);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (partial) */
- write_reg(sohandle, so, 0, 0xd3);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (idle) */
- write_reg(sohandle, so, 0, 0xd4);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- write_reg(sohandle, so, 0, 0xd8);
- write_reg(sohandle, so, 1, 0x77);
- write_reg(sohandle, so, 1, 0x77);
-
- /* TE signal */
- write_reg(sohandle, so, 0, 0x35);
- write_reg(sohandle, so, 1, 0x00);
-
- /* TE signal line */
- write_reg(sohandle, so, 0, 0x44);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
-
- /* column address */
- write_reg(sohandle, so, 0, 0x2a);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0xef);
-
- /* page address */
- write_reg(sohandle, so, 0, 0x2b);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x01);
- write_reg(sohandle, so, 1, 0x8f);
-
- /* exit sleep mode */
- write_reg(sohandle, so, 0, 0x11);
-
- mdelay(120);
-
- /* clear vram */
- clear_memory(sohandle, so);
-
- /* display ON */
- write_reg(sohandle, so, 0, 0x29);
- mdelay(1);
-
- write_memory_start(sohandle, so);
-}
-
-int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* power on */
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
- gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
- udelay(1100);
- gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
- udelay(10);
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- mdelay(20);
-
- if (read_device_code(sohandle, so) != 0x01221517)
- return -ENODEV;
-
- pr_info("KFR2R09 WQVGA LCD Module detected.\n");
-
- display_on(sohandle, so);
- return 0;
-}
-
-void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_memory_start(sohandle, so);
-}
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
deleted file mode 100644
index f1b8985cb9223c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/sdram.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * KFR2R09 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(kfr2r09_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_enter_end)
-
- .balign 4
-ENTRY(kfr2r09_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
- ED 0xFD000020, 0x011B0002 /* DBCONF */
- ED 0xFD000030, 0x03060E02 /* DBTR0 */
- ED 0xFD000034, 0x01020102 /* DBTR1 */
- ED 0xFD000038, 0x01090406 /* DBTR2 */
- ED 0xFD000008, 0x00000004 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
- WAIT 1
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
- ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
deleted file mode 100644
index 20f4db778ed6ae..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 board support code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_data/lv5207lp.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach/kfr2r09.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/rj54n1cb0c.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* set VIO_CKO clock to 25MHz */
-#define CEU_MCLK_FREQ 25000000
-#define DRVCRB 0xA405018C
-
-static struct mtd_partition kfr2r09_nor_flash_partitions[] =
-{
- {
- .name = "boot",
- .offset = 0,
- .size = (4 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data kfr2r09_nor_flash_data = {
- .width = 2,
- .parts = kfr2r09_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
-};
-
-static struct resource kfr2r09_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nor_flash_device = {
- .name = "physmap-flash",
- .resource = kfr2r09_nor_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
- .dev = {
- .platform_data = &kfr2r09_nor_flash_data,
- },
-};
-
-static struct resource kfr2r09_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x10000000,
- .end = 0x1001ffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nand_flash_device = {
- .name = "onenand-flash",
- .resource = kfr2r09_nand_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
-};
-
-static struct sh_keysc_info kfr2r09_sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 10,
- .keycodes = {
- KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
- KEY_1, KEY_2, KEY_3, 0, KEY_UP,
- KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
- KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
- KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
- 0, 0, 0, 0, 0
- },
-};
-
-static struct resource kfr2r09_sh_keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
- .resource = kfr2r09_sh_keysc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_keysc_info,
- },
-};
-
-static const struct fb_videomode kfr2r09_lcdc_modes[] = {
- {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
-};
-
-static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS18,
- .clock_divider = 6,
- .flags = LCDC_FLAGS_DWPOL,
- .lcd_modes = kfr2r09_lcdc_modes,
- .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
- .panel_cfg = {
- .width = 35,
- .height = 58,
- .setup_sys = kfr2r09_lcd_setup,
- .start_transfer = kfr2r09_lcd_start,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x07010904,
- .ldmt3r = 0x14012914,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-};
-
-static struct resource kfr2r09_sh_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
- .resource = kfr2r09_sh_lcdc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_lcdc_info,
- },
-};
-
-static struct lv5207lp_platform_data kfr2r09_backlight_data = {
- .fbdev = &kfr2r09_sh_lcdc_device.dev,
- .def_value = 13,
- .max_value = 13,
-};
-
-static struct i2c_board_info kfr2r09_backlight_board_info = {
- I2C_BOARD_INFO("lv5207lp", 0x75),
- .platform_data = &kfr2r09_backlight_data,
-};
-
-static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource kfr2r09_usb0_gadget_resources[] = {
- [0] = {
- .start = 0x04d80000,
- .end = 0x04d80123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device kfr2r09_usb0_gadget_device = {
- .name = "r8a66597_udc",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &kfr2r09_usb0_gadget_data,
- },
- .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
- .resource = kfr2r09_usb0_gadget_resources,
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = rj54n1cb0c */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x50,
- },
- },
-};
-
-static struct resource kfr2r09_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
- .resource = kfr2r09_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-static struct rj54n1_pdata rj54n1_priv = {
- .mclk_freq = CEU_MCLK_FREQ,
- .ioctl_high = false,
-};
-
-static struct i2c_board_info kfr2r09_i2c_camera = {
- I2C_BOARD_INFO("rj54n1cb0c", 0x50),
- .platform_data = &rj54n1_priv,
-};
-
-static struct gpiod_lookup_table rj54n1_gpios = {
- .dev_id = "1-0050",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource kfr2r09_sh_sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
- .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
-};
-
-static struct platform_device kfr2r09_sh_sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
- .resource = kfr2r09_sh_sdhi0_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct platform_device *kfr2r09_devices[] __initdata = {
- &kfr2r09_nor_flash_device,
- &kfr2r09_nand_flash_device,
- &kfr2r09_sh_keysc_device,
- &kfr2r09_sh_lcdc_device,
- &kfr2r09_sh_sdhi0_device,
-};
-
-#define BSC_CS0BCR 0xfec10004
-#define BSC_CS0WCR 0xfec10024
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS4WCR 0xfec10030
-#define PORT_MSELCRB 0xa4050182
-
-#ifdef CONFIG_I2C
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 1);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 6);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-#else
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- return -ENODEV;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- return -ENODEV;
-}
-#endif
-
-static int kfr2r09_usb0_gadget_setup(void)
-{
- int plugged_in;
-
- gpio_request(GPIO_PTN4, NULL); /* USB_DET */
- gpio_direction_input(GPIO_PTN4);
- plugged_in = gpio_get_value(GPIO_PTN4);
- if (!plugged_in)
- return -ENODEV; /* no cable plugged in */
-
- if (kfr2r09_usb0_gadget_i2c_setup() != 0)
- return -ENODEV; /* unable to configure using i2c */
-
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
- gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
- gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
- gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
- msleep(20); /* wait 20ms to let the clock settle */
- clk_enable(clk_get(NULL, "usb0"));
- __raw_writew(0x0600, 0xa40501d4);
-
- return 0;
-}
-
-extern char kfr2r09_sdram_enter_start;
-extern char kfr2r09_sdram_enter_end;
-extern char kfr2r09_sdram_leave_start;
-extern char kfr2r09_sdram_leave_end;
-
-static int __init kfr2r09_devices_setup(void)
-{
- struct clk *camera_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &kfr2r09_sdram_enter_start,
- &kfr2r09_sdram_enter_end,
- &kfr2r09_sdram_leave_start,
- &kfr2r09_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* enable SCIF1 serial port for YC401 console support */
- gpio_request(GPIO_FN_SCIF1_RXD, NULL);
- gpio_request(GPIO_FN_SCIF1_TXD, NULL);
- kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
- gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
- gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
-
- /* setup NOR flash at CS0 */
- __raw_writel(0x36db0400, BSC_CS0BCR);
- __raw_writel(0x00000500, BSC_CS0WCR);
-
- /* setup NAND flash at CS4 */
- __raw_writel(0x36db0400, BSC_CS4BCR);
- __raw_writel(0x00000500, BSC_CS4WCR);
-
- /* setup KEYSC pins */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* setup LCDC pins for SYS panel */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
- gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
- gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
- gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
- gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
- gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
- gpio_direction_output(GPIO_PTE4, 1);
- gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
- gpio_direction_output(GPIO_PTF4, 1);
- gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* setup USB function */
- if (kfr2r09_usb0_gadget_setup() == 0)
- platform_device_register(&kfr2r09_usb0_gadget_device);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
-
- /* SDHI0 connected to yc304 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
-
- /* Set camera clock frequency and register and alias for rj54n1. */
- camera_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(camera_clk)) {
- clk_set_rate(camera_clk,
- clk_round_rate(camera_clk, CEU_MCLK_FREQ));
- clk_put(camera_clk);
- }
- clk_add_alias(NULL, "1-0050", "video_clk", NULL);
-
- /* set DRVCRB
- *
- * use 1.8 V for VccQ_VIO
- * use 2.85V for VccQ_SR
- */
- __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
-
- gpiod_add_lookup_table(&rj54n1_gpios);
-
- i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&kfr2r09_ceu_device.dev);
- dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&kfr2r09_ceu_device);
-
- return platform_add_devices(kfr2r09_devices,
- ARRAY_SIZE(kfr2r09_devices));
-}
-device_initcall(kfr2r09_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int kfr2r09_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * MD8=1: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init kfr2r09_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_kfr2r09 __initmv = {
- .mv_name = "kfr2r09",
- .mv_mode_pins = kfr2r09_mode_pins,
- .mv_mem_reserve = kfr2r09_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
deleted file mode 100644
index 6cba041fffe0f3..00000000000000
--- a/arch/sh/boards/mach-landisk/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
-#
-
-obj-y := setup.o irq.o psw.o gio.o
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
deleted file mode 100644
index ff2200fec29a76..00000000000000
--- a/arch/sh/boards/mach-landisk/gio.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- * Copylight (C) 2006 kogiidena
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <mach-landisk/mach/gio.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-#define DEVCOUNT 4
-#define GIO_MINOR 2 /* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
- int ret = -ENOENT;
-
- preempt_disable();
- if (minor < DEVCOUNT) {
- if (openCnt > 0) {
- ret = -EALREADY;
- } else {
- openCnt++;
- ret = 0;
- }
- }
- preempt_enable();
- return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
-
- if (minor < DEVCOUNT) {
- openCnt--;
- }
- return 0;
-}
-
-static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- unsigned int data;
- static unsigned int addr = 0;
-
- if (cmd & 0x01) { /* write */
- if (copy_from_user(&data, (int *)arg, sizeof(int))) {
- return -EFAULT;
- }
- }
-
- switch (cmd) {
- case GIODRV_IOCSGIOSETADDR: /* address set */
- addr = data;
- break;
-
- case GIODRV_IOCSGIODATA1: /* write byte */
- __raw_writeb((unsigned char)(0x0ff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA2: /* write word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- __raw_writew((unsigned short int)(0x0ffff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA4: /* write long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- __raw_writel(data, addr);
- break;
-
- case GIODRV_IOCGGIODATA1: /* read byte */
- data = __raw_readb(addr);
- break;
-
- case GIODRV_IOCGGIODATA2: /* read word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- data = __raw_readw(addr);
- break;
-
- case GIODRV_IOCGGIODATA4: /* read long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- data = __raw_readl(addr);
- break;
- default:
- return -EFAULT;
- break;
- }
-
- if ((cmd & 0x01) == 0) { /* read */
- if (copy_to_user((int *)arg, &data, sizeof(int))) {
- return -EFAULT;
- }
- }
- return 0;
-}
-
-static const struct file_operations gio_fops = {
- .owner = THIS_MODULE,
- .open = gio_open, /* open */
- .release = gio_close, /* release */
- .unlocked_ioctl = gio_ioctl,
- .llseek = noop_llseek,
-};
-
-static int __init gio_init(void)
-{
- int error;
-
- printk(KERN_INFO "gio: driver initialized\n");
-
- openCnt = 0;
-
- if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
- printk(KERN_ERR
- "gio: Couldn't alloc_chrdev_region, error=%d\n",
- error);
- return 1;
- }
-
- cdev_p = cdev_alloc();
- cdev_p->ops = &gio_fops;
- error = cdev_add(cdev_p, dev, DEVCOUNT);
- if (error) {
- printk(KERN_ERR
- "gio: Couldn't cdev_add, error=%d\n", error);
- return 1;
- }
-
- return 0;
-}
-
-static void __exit gio_exit(void)
-{
- cdev_del(cdev_p);
- unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
deleted file mode 100644
index 0b672b80c56179..00000000000000
--- a/arch/sh/boards/mach-landisk/irq.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- * Copyright (C) 2011 Nobuhiro Iwamatsu
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-enum {
- UNUSED = 0,
-
- PCI_INTA, /* PCI int A */
- PCI_INTB, /* PCI int B */
- PCI_INTC, /* PCI int C */
- PCI_INTD, /* PCI int D */
- ATA, /* ATA */
- FATA, /* CF */
- POWER, /* Power switch */
- BUTTON, /* Button switch */
-};
-
-/* Vectors for LANDISK */
-static struct intc_vect vectors_landisk[] __initdata = {
- INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
- INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
- INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
- INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
- INTC_IRQ(ATA, IRQ_ATA),
- INTC_IRQ(FATA, IRQ_FATA),
- INTC_IRQ(POWER, IRQ_POWER),
- INTC_IRQ(BUTTON, IRQ_BUTTON),
-};
-
-/* IRLMSK mask register layout for LANDISK */
-static struct intc_mask_reg mask_registers_landisk[] __initdata = {
- { PA_IMASK, 0, 8, /* IRLMSK */
- { BUTTON, POWER, FATA, ATA,
- PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
- }
- },
-};
-
-static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
- mask_registers_landisk, NULL, NULL);
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
- register_intc_controller(&intc_desc_landisk);
- __raw_writeb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
deleted file mode 100644
index e171d9af48f3df..00000000000000
--- a/arch/sh/boards/mach-landisk/psw.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007 Paul Mundt
- * Copyright (C) 2007 kogiidena
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int sw_value;
- int ret = 0;
-
- sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- /* Figure out who raised it */
- if (sw_value & (1 << psw_info->bit)) {
- psw->state = 1;
- mod_timer(&psw->debounce, jiffies + 50);
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- __raw_writeb(0x00, PA_PWRINT_CLR);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
- [0] = {
- .start = IRQ_POWER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource psw_usl5p_resources[] = {
- [0] = {
- .start = IRQ_BUTTON,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
- .name = "psw_power",
- .bit = 4,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
- .name = "psw1",
- .bit = 0,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
- .name = "psw2",
- .bit = 2,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
- .name = "psw3",
- .bit = 1,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_power_resources),
- .resource = psw_power_resources,
- .dev = {
- .platform_data = &psw_power_platform_data,
- },
-};
-
-static struct platform_device psw1_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw1_platform_data,
- },
-};
-
-static struct platform_device psw2_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw2_platform_data,
- },
-};
-
-static struct platform_device psw3_switch_device = {
- .name = "push-switch",
- .id = 3,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw3_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &psw_power_switch_device,
- &psw1_switch_device,
- &psw2_switch_device,
- &psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-device_initcall(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
deleted file mode 100644
index 2c44b94f82fb27..00000000000000
--- a/arch/sh/boards/mach-landisk/setup.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/io.h>
-
-static void landisk_power_off(void)
-{
- __raw_writeb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "rs5c313",
- .id = -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
- &cf_ide_device,
- &rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
- cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f;
- cf_ide_resources[0].flags = IORESOURCE_IO;
- cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
- cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03;
- cf_ide_resources[1].flags = IORESOURCE_IO;
- cf_ide_resources[2].start = IRQ_FATA;
- cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
- return platform_add_devices(landisk_devices,
- ARRAY_SIZE(landisk_devices));
-}
-
-device_initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
- /* I/O port identity mapping */
- __set_io_port_base(0);
-
- /* LED ON */
- __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
-
- printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
- pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
- .mv_name = "LANDISK",
- .mv_setup = landisk_setup,
- .mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/mach-lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
deleted file mode 100644
index 0fbd0822911a49..00000000000000
--- a/arch/sh/boards/mach-lboxre2/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the L-BOX RE2 specific parts of the kernel
-# Copyright (c) 2007 Nobuhiro Iwamatsu
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
deleted file mode 100644
index a250e3b9019de1..00000000000000
--- a/arch/sh/boards/mach-lboxre2/irq.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lboxre2/irq.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach/lboxre2.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_lboxre2_IRQ(void)
-{
- make_imask_irq(IRQ_CF1);
- make_imask_irq(IRQ_CF0);
- make_imask_irq(IRQ_INTD);
- make_imask_irq(IRQ_ETH1);
- make_imask_irq(IRQ_ETH0);
- make_imask_irq(IRQ_INTA);
-}
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
deleted file mode 100644
index 20d01b430f2a81..00000000000000
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lbox/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <asm/addrspace.h>
-#include <mach/lboxre2.h>
-#include <asm/io.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRQ_CF0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *lboxre2_devices[] __initdata = {
- &cf_ide_device,
-};
-
-static int __init lboxre2_devices_setup(void)
-{
- u32 cf0_io_base; /* Boot CF base address */
- pgprot_t prot;
- unsigned long paddrbase, psize;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void*)PA_AREA5_IO);
- psize = PAGE_SIZE;
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
- if (!cf0_io_base) {
- printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
- return -ENOMEM;
- }
-
- cf_ide_resources[0].start += cf0_io_base ;
- cf_ide_resources[0].end += cf0_io_base ;
- cf_ide_resources[1].start += cf0_io_base ;
- cf_ide_resources[1].end += cf0_io_base ;
-
- return platform_add_devices(lboxre2_devices,
- ARRAY_SIZE(lboxre2_devices));
-
-}
-device_initcall(lboxre2_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_lboxre2 __initmv = {
- .mv_name = "L-BOX RE2",
- .mv_init_irq = init_lboxre2_IRQ,
-};
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
deleted file mode 100644
index 05c5698dcad025..00000000000000
--- a/arch/sh/boards/mach-microdev/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
deleted file mode 100644
index 2a04f72dd14577..00000000000000
--- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup for the SMSC FDC37C93xAPM
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach/microdev.h>
-
-#define SMSC_CONFIG_PORT_ADDR (0x3F0)
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
-#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
-#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
-#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
-#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
-#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
-#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE 0x03f8
-#define SERIAL2_PRIMARY_BASE 0x02f8
-
-#define MSB(x) ( (x) >> 8 )
-#define LSB(x) ( (x) & 0xff )
-
- /* General-Purpose base address on CPU-board FPGA */
-#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
-
-static int __init smsc_superio_setup(void)
-{
-
- unsigned char devid, devrev;
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-
- if ((devid == 0x30) && (devrev == 0x01))
- printk("SMSC FDC37C93xAPM SuperIO device detected\n");
- else
- return -ENODEV;
-
- /* Select the keyboard device */
- SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
- /* Select the Serial #1 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the Serial #2 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#1 device */
- SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#2 device */
- SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the configuration registers */
- SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
- /* enable the appropriate GPIO pins for IDE functionality:
- * bit[0] In/Out 1==input; 0==output
- * bit[1] Polarity 1==invert; 0==no invert
- * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
- * bit[3:4] Function Select 00==original; 01==Alternate Function #1
- */
- SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
- SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e63dc..00000000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
- /*
- * we need to have a 'safe' address to re-direct all I/O requests
- * that we do not explicitly wish to handle. This safe address
- * must have the following properies:
- *
- * * writes are ignored (no exception)
- * * reads are benign (no side-effects)
- * * accesses of width 1, 2 and 4-bytes are all valid.
- *
- * The Processor Version Register (PVR) has these properties.
- */
-#define PVR 0xff000030 /* Processor Version Register */
-
-
-#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */
-#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */
-#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT 0x10ul
-
-#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */
-#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
-#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
- unsigned long result;
-
- if ((offset >= IO_LAN91C111_BASE) &&
- (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * SMSC LAN91C111 Ethernet chip
- */
- result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
- } else if ((offset >= IO_SUPERIO_BASE) &&
- (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Configuration Registers
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE1_BASE) &&
- (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE1_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE2_BASE) &&
- (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE2_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL1_BASE) &&
- (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL2_BASE) &&
- (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_ISP1161_BASE) &&
- (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
- /*
- * Philips USB ISP1161x chip
- */
- result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
- } else {
- /*
- * safe default.
- */
- printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __func__, offset);
- result = PVR;
- }
-
- return (void __iomem *)result;
-}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
deleted file mode 100644
index dc27492c83d765..00000000000000
--- a/arch/sh/boards/mach-microdev/irq.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
-
-static const struct {
- unsigned char fpgaIrq;
- unsigned char mapped;
- const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
- { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */
- { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */
- { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */
- { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */
- { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */
- { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */
- { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */
- { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */
- { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */
- { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */
- { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */
- { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */
- { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */
- { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */
- { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */
- { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-# error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-# error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-# error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-# error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-# error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-# error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void disable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned int fpgaIrq;
-
- if (irq >= NUM_EXTERNAL_IRQS)
- return;
- if (!fpgaIrqTable[irq].mapped)
- return;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long priorityReg, priorities, pri;
- unsigned int fpgaIrq;
-
- if (unlikely(irq >= NUM_EXTERNAL_IRQS))
- return;
- if (unlikely(!fpgaIrqTable[irq].mapped))
- return;
-
- pri = 15 - irq;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
- priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
- /* set priority for the interrupt */
- priorities = __raw_readl(priorityReg);
- priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
- priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
- __raw_writel(priorities, priorityReg);
-
- /* enable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-static struct irq_chip microdev_irq_type = {
- .name = "MicroDev-IRQ",
- .irq_unmask = enable_microdev_irq,
- .irq_mask = disable_microdev_irq,
-};
-
-/* This function sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler(irq, µdev_irq_type, handle_level_irq);
- disable_microdev_irq(irq_get_irq_data(irq));
-}
-
-extern void __init init_microdev_irq(void)
-{
- int i;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
- for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
- make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
- volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
- volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
- volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
- volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
- volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
- volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
- volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
- volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
- printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
- printk("FPGA_INTENB = 0x%08x\n", *intenb);
- printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
- printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
- printk("FPGA_INTREQ = 0x%08x\n", *intreq);
- printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
- printk("-------------------------------------------------------------------------------\n");
-}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
deleted file mode 100644
index f4a777fe2d0121..00000000000000
--- a/arch/sh/boards/mach-microdev/setup.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <mach/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x300,
- .end = 0x300 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MICRODEV_LINUX_IRQ_ETHERNET,
- .end = MICRODEV_LINUX_IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
- { S1DREG_MISC, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x00 },
- { S1DREG_GPIO_CNF0, 0x00 },
- { S1DREG_GPIO_CNF1, 0x00 },
- { S1DREG_GPIO_CTL0, 0x00 },
- { S1DREG_GPIO_CTL1, 0x00 },
- { S1DREG_CLK_CNF, 0x02 },
- { S1DREG_LCD_CLK_CNF, 0x01 },
- { S1DREG_CRT_CLK_CNF, 0x03 },
- { S1DREG_MPLUG_CLK_CNF, 0x03 },
- { S1DREG_CPU2MEM_WST_SEL, 0x02 },
- { S1DREG_SDRAM_REF_RATE, 0x03 },
- { S1DREG_SDRAM_TC0, 0x00 },
- { S1DREG_SDRAM_TC1, 0x01 },
- { S1DREG_MEM_CNF, 0x80 },
- { S1DREG_PANEL_TYPE, 0x25 },
- { S1DREG_MOD_RATE, 0x00 },
- { S1DREG_LCD_DISP_HWIDTH, 0x63 },
- { S1DREG_LCD_NDISP_HPER, 0x1e },
- { S1DREG_TFT_FPLINE_START, 0x06 },
- { S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
- { S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
- { S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
- { S1DREG_LCD_NDISP_VPER, 0x00 },
- { S1DREG_TFT_FPFRAME_START, 0x0a },
- { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
- { S1DREG_LCD_DISP_MODE, 0x03 },
- { S1DREG_LCD_MISC, 0x00 },
- { S1DREG_LCD_DISP_START0, 0x00 },
- { S1DREG_LCD_DISP_START1, 0x00 },
- { S1DREG_LCD_DISP_START2, 0x00 },
- { S1DREG_LCD_MEM_OFF0, 0x90 },
- { S1DREG_LCD_MEM_OFF1, 0x01 },
- { S1DREG_LCD_PIX_PAN, 0x00 },
- { S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
- { S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
- { S1DREG_CRT_DISP_HWIDTH, 0x63 },
- { S1DREG_CRT_NDISP_HPER, 0x1f },
- { S1DREG_CRT_HRTC_START, 0x04 },
- { S1DREG_CRT_HRTC_PWIDTH, 0x8f },
- { S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
- { S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
- { S1DREG_CRT_NDISP_VPER, 0x1b },
- { S1DREG_CRT_VRTC_START, 0x00 },
- { S1DREG_CRT_VRTC_PWIDTH, 0x83 },
- { S1DREG_TV_OUT_CTL, 0x10 },
- { S1DREG_CRT_DISP_MODE, 0x05 },
- { S1DREG_CRT_DISP_START0, 0x00 },
- { S1DREG_CRT_DISP_START1, 0x00 },
- { S1DREG_CRT_DISP_START2, 0x00 },
- { S1DREG_CRT_MEM_OFF0, 0x20 },
- { S1DREG_CRT_MEM_OFF1, 0x03 },
- { S1DREG_CRT_PIX_PAN, 0x00 },
- { S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
- { S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
- { S1DREG_LCD_CUR_CTL, 0x00 },
- { S1DREG_LCD_CUR_START, 0x01 },
- { S1DREG_LCD_CUR_XPOS0, 0x00 },
- { S1DREG_LCD_CUR_XPOS1, 0x00 },
- { S1DREG_LCD_CUR_YPOS0, 0x00 },
- { S1DREG_LCD_CUR_YPOS1, 0x00 },
- { S1DREG_LCD_CUR_BCTL0, 0x00 },
- { S1DREG_LCD_CUR_GCTL0, 0x00 },
- { S1DREG_LCD_CUR_RCTL0, 0x00 },
- { S1DREG_LCD_CUR_BCTL1, 0x1f },
- { S1DREG_LCD_CUR_GCTL1, 0x3f },
- { S1DREG_LCD_CUR_RCTL1, 0x1f },
- { S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
- { S1DREG_CRT_CUR_CTL, 0x00 },
- { S1DREG_CRT_CUR_START, 0x01 },
- { S1DREG_CRT_CUR_XPOS0, 0x00 },
- { S1DREG_CRT_CUR_XPOS1, 0x00 },
- { S1DREG_CRT_CUR_YPOS0, 0x00 },
- { S1DREG_CRT_CUR_YPOS1, 0x00 },
- { S1DREG_CRT_CUR_BCTL0, 0x00 },
- { S1DREG_CRT_CUR_GCTL0, 0x00 },
- { S1DREG_CRT_CUR_RCTL0, 0x00 },
- { S1DREG_CRT_CUR_BCTL1, 0x1f },
- { S1DREG_CRT_CUR_GCTL1, 0x3f },
- { S1DREG_CRT_CUR_RCTL1, 0x1f },
- { S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
- { S1DREG_BBLT_CTL0, 0x00 },
- { S1DREG_BBLT_CTL1, 0x00 },
- { S1DREG_BBLT_CC_EXP, 0x00 },
- { S1DREG_BBLT_OP, 0x00 },
- { S1DREG_BBLT_SRC_START0, 0x00 },
- { S1DREG_BBLT_SRC_START1, 0x00 },
- { S1DREG_BBLT_SRC_START2, 0x00 },
- { S1DREG_BBLT_DST_START0, 0x00 },
- { S1DREG_BBLT_DST_START1, 0x00 },
- { S1DREG_BBLT_DST_START2, 0x00 },
- { S1DREG_BBLT_MEM_OFF0, 0x00 },
- { S1DREG_BBLT_MEM_OFF1, 0x00 },
- { S1DREG_BBLT_WIDTH0, 0x00 },
- { S1DREG_BBLT_WIDTH1, 0x00 },
- { S1DREG_BBLT_HEIGHT0, 0x00 },
- { S1DREG_BBLT_HEIGHT1, 0x00 },
- { S1DREG_BBLT_BGC0, 0x00 },
- { S1DREG_BBLT_BGC1, 0x00 },
- { S1DREG_BBLT_FGC0, 0x00 },
- { S1DREG_BBLT_FGC1, 0x00 },
- { S1DREG_LKUP_MODE, 0x00 },
- { S1DREG_LKUP_ADDR, 0x00 },
- { S1DREG_PS_CNF, 0x10 },
- { S1DREG_PS_STATUS, 0x00 },
- { S1DREG_CPU2MEM_WDOGT, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
- .initregs = s1d13806_initregs,
- .initregssize = ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
- [0] = {
- .start = 0x07200000,
- .end = 0x07200000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x07000000,
- .end = 0x07000000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device s1d13806_device = {
- .name = "s1d13806fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(s1d13806_resources),
- .resource = s1d13806_resources,
-
- .dev = {
- .platform_data = &s1d13806_platform_data,
- },
-};
-
-static struct platform_device *microdev_devices[] __initdata = {
- &smc91x_device,
- &s1d13806_device,
-};
-
-static int __init microdev_devices_setup(void)
-{
- return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-device_initcall(microdev_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
- .mv_name = "SH4-202 MicroDev",
- .mv_ioport_map = microdev_ioport_map,
- .mv_init_irq = init_microdev_irq,
-};
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
deleted file mode 100644
index fb64a10e217065..00000000000000
--- a/arch/sh/boards/mach-migor/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_MIGOR
-
-choice
- prompt "Migo-R LCD Panel Board Selection"
- default SH_MIGOR_QVGA
-
-config SH_MIGOR_QVGA
- bool "QVGA (320x240)"
-
-config SH_MIGOR_RTA_WVGA
- bool "RTA WVGA (800x480)"
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
deleted file mode 100644
index c223d759fcb1ee..00000000000000
--- a/arch/sh/boards/mach-migor/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
deleted file mode 100644
index 4ebf130510bc6e..00000000000000
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for SuperH MigoR Quarter VGA LCD Panel
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
- * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <cpu/sh7722.h>
-#include <mach/migor.h>
-
-/* LCD Module is a PH240320T according to board schematics. This module
- * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
- * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
- * SYS-80 interface configured in 16 bit mode.
- *
- * Index 0: "Device Code Read" returns 0x1505.
- */
-
-static void reset_lcd_module(void)
-{
- gpio_set_value(GPIO_PTH2, 0);
- mdelay(2);
- gpio_set_value(GPIO_PTH2, 1);
- mdelay(1);
-}
-
-/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
-
-static unsigned long adjust_reg18(unsigned short data)
-{
- unsigned long tmp1, tmp2;
-
- tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
- tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
- return tmp1 | tmp2;
-}
-
-static void write_reg(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
-}
-
-static void write_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
-}
-
-static unsigned long read_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg)
-{
- unsigned long data;
-
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- data = sys_ops->read_data(sys_ops_handle);
- return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
-}
-
-static void migor_lcd_qvga_seq(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i += 2)
- write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
-}
-
-static const unsigned short sync_data[] = {
- 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-};
-
-static const unsigned short magic0_data[] = {
- 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
- 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
- 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
-};
-
-static const unsigned short magic1_data[] = {
- 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
- 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
- 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
- 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
- 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
- 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
- 0x0015, 0x8000,
-};
-
-static const unsigned short magic2_data[] = {
- 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
-};
-
-static const unsigned short magic3_data[] = {
- 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
-};
-
-int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long xres = 320;
- unsigned long yres = 240;
- int k;
-
- reset_lcd_module();
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
-
- if (read_reg16(sohandle, so, 0) != 0x1505)
- return -ENODEV;
-
- pr_info("Migo-R QVGA LCD Module detected.\n");
-
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
- write_reg16(sohandle, so, 0x00A4, 0x0001);
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
- mdelay(100);
-
- migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
- write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
- write_reg16(sohandle, so, 0x0051, 0x00ef);
- write_reg16(sohandle, so, 0x0052, 0x0000);
- write_reg16(sohandle, so, 0x0053, xres - 1);
-
- migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
- mdelay(40);
-
- /* clear GRAM to avoid displaying garbage */
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
-
- for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
- write_reg16(sohandle, so, 0x0022, 0x0000);
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
- write_reg16(sohandle, so, 0x0007, 0x0173);
- mdelay(40);
-
- /* enable display */
- write_reg(sohandle, so, 0x00, 0x22);
- mdelay(100);
- return 0;
-}
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
deleted file mode 100644
index 3a6bee1270aaf7..00000000000000
--- a/arch/sh/boards/mach-migor/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Migo-R sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(migor_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(migor_sdram_enter_end)
-
- .balign 4
-ENTRY(migor_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
deleted file mode 100644
index f60061283c4827..00000000000000
--- a/arch/sh/boards/mach-migor/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/clkdev.h>
-#include <linux/dma-map-ops.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/memblock.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/platnand.h>
-#include <linux/i2c.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smc91x.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/videodev2.h>
-#include <linux/sh_intc.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-#include <media/i2c/tw9910.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-#include <mach/migor.h>
-#include <cpu/sh7722.h>
-
-/* Address IRQ Size Bus Description
- * 0x00000000 64MB 16 NOR Flash (SP29PL256N)
- * 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
- * 0x10000000 IRQ0 16 Ethernet (SMC91C111)
- * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
- * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x10000300,
- .end = 0x1000030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x600), /* IRQ0 */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = {
- 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
- 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
- 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
- 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
- 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = (15 * 1024 * 1024),
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
- .width = 2,
- .parts = migor_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device migor_nor_flash_device = {
- .name = "physmap-flash",
- .resource = migor_nor_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nor_flash_resources),
- .dev = {
- .platform_data = &migor_nor_flash_data,
- },
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
- {
- .name = "nanddata1",
- .offset = 0x0,
- .size = 512 * 1024 * 1024,
- },
- {
- .name = "nanddata2",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024 * 1024,
- },
-};
-
-static void migor_nand_flash_cmd_ctl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00400000);
- else if (ctrl & NAND_ALE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00800000);
- else
- writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct nand_chip *chip)
-{
- return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
-}
-
-static struct platform_nand_data migor_nand_flash_data = {
- .chip = {
- .nr_chips = 1,
- .partitions = migor_nand_flash_partitions,
- .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
- .chip_delay = 20,
- },
- .ctrl = {
- .dev_ready = migor_nand_flash_ready,
- .cmd_ctrl = migor_nand_flash_cmd_ctl,
- },
-};
-
-static struct resource migor_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x18000000,
- .end = 0x18ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device migor_nand_flash_device = {
- .name = "gen_nand",
- .resource = migor_nand_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nand_flash_resources),
- .dev = {
- .platform_data = &migor_nand_flash_data,
- }
-};
-
-static const struct fb_videomode migor_lcd_modes[] = {
- {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 64,
- .right_margin = 16,
- .hsync_len = 120,
- .sync = 0,
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .name = "PH240320T",
- .xres = 320,
- .yres = 240,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .sync = FB_SYNC_HOR_HIGH_ACT,
-#endif
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB16,
- .clock_divider = 2,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .clock_source = LCDC_CLK_PERIPHERAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS16A,
- .clock_divider = 10,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = {
- .width = 49, /* 2.4 inch */
- .height = 37,
- .setup_sys = migor_lcd_qvga_setup,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x06000a09,
- .ldmt3r = 0x180e3418,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-#endif
-};
-
-static struct resource migor_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(migor_lcdc_resources),
- .resource = migor_lcdc_resources,
- .dev = {
- .platform_data = &sh_mobile_lcdc_info,
- },
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = ov772x */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource migor_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(migor_ceu_resources),
- .resource = migor_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT2, "pdn", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource sdhi_cn9_resources[] = {
- [0] = {
- .name = "SDHI",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi_cn9_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
- .resource = sdhi_cn9_resources,
- .dev = {
- .platform_data = &sh7724_sdhi_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = 0,
-};
-
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct i2c_board_info migor_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- },
- {
- I2C_BOARD_INFO("migor_ts", 0x51),
- .irq = evt2irq(0x6c0), /* IRQ6 */
- },
- {
- I2C_BOARD_INFO("wm8978", 0x1a),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
-};
-
-static struct platform_device *migor_devices[] __initdata = {
- &smc91x_eth_device,
- &sh_keysc_device,
- &migor_lcdc_device,
- &migor_nor_flash_device,
- &migor_nand_flash_device,
- &sdhi_cn9_device,
-};
-
-extern char migor_sdram_enter_start;
-extern char migor_sdram_enter_end;
-extern char migor_sdram_leave_start;
-extern char migor_sdram_leave_end;
-
-static int __init migor_devices_setup(void)
-{
- struct clk *video_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &migor_sdram_enter_start,
- &migor_sdram_enter_end,
- &migor_sdram_leave_start,
- &migor_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Let D11 LED show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit D12 LED show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
- gpio_request(GPIO_FN_IRQ0, NULL);
- __raw_writel(0x00003400, BSC_CS4BCR);
- __raw_writel(0x00110080, BSC_CS4WCR);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* NAND Flash */
- gpio_request(GPIO_FN_CS6A_CE2B, NULL);
- __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_input(GPIO_PTA1);
-
- /* SDHI */
- gpio_request(GPIO_FN_SDHICD, NULL);
- gpio_request(GPIO_FN_SDHIWP, NULL);
- gpio_request(GPIO_FN_SDHID3, NULL);
- gpio_request(GPIO_FN_SDHID2, NULL);
- gpio_request(GPIO_FN_SDHID1, NULL);
- gpio_request(GPIO_FN_SDHID0, NULL);
- gpio_request(GPIO_FN_SDHICMD, NULL);
- gpio_request(GPIO_FN_SDHICLK, NULL);
-
- /* Touch Panel */
- gpio_request(GPIO_FN_IRQ6, NULL);
-
- /* LCD Panel */
-#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL);
- gpio_request(GPIO_FN_LCDCS, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDWR, NULL);
- gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
- gpio_direction_output(GPIO_PTH2, 1);
-#endif
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-#endif
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
-
- /* SIU: Port B */
- gpio_request(GPIO_FN_SIUBOLR, NULL);
- gpio_request(GPIO_FN_SIUBOBT, NULL);
- gpio_request(GPIO_FN_SIUBISLD, NULL);
- gpio_request(GPIO_FN_SIUBOSLD, NULL);
- gpio_request(GPIO_FN_SIUMCKB, NULL);
-
- /*
- * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
- * output. Need only SIUB, set to output for master mode (table 34.2)
- */
- __raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
-
- /*
- * Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
- * issues on Panel Board V2.1.
- */
- video_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(video_clk)) {
- clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
- clk_put(video_clk);
- }
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register GPIOs for video sources. */
- gpiod_add_lookup_table(&ov7725_gpios);
- gpiod_add_lookup_table(&tw9910_gpios);
-
- i2c_register_board_info(0, migor_i2c_devices,
- ARRAY_SIZE(migor_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&migor_ceu_device.dev);
- dma_declare_coherent_memory(&migor_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&migor_ceu_device);
-
- return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-arch_initcall(migor_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int migor_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=0: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init migor_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_migor __initmv = {
- .mv_name = "Migo-R",
- .mv_mode_pins = migor_mode_pins,
- .mv_mem_reserve = migor_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
deleted file mode 100644
index 21770e668de283..00000000000000
--- a/arch/sh/boards/mach-r2d/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RTS7751R2D
-
-menu "RTS7751R2D Board Revision"
-
-config RTS7751R2D_PLUS
- bool "R2D-PLUS"
- help
- Selecting this option will configure the kernel for R2D-PLUS.
-
- R2D-PLUS is the smaller of the two R2D board versions, equipped
- with a single PCI slot.
-
-config RTS7751R2D_1
- bool "R2D-1"
- help
- Selecting this option will configure the kernel for R2D-1.
-
- R2D-1 is the larger of the two R2D board versions, equipped
- with two PCI slots.
-endmenu
-
-endif
-
diff --git a/arch/sh/boards/mach-r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
deleted file mode 100644
index 7e7ac5e0566211..00000000000000
--- a/arch/sh/boards/mach-r2d/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the RTS7751R2D specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
deleted file mode 100644
index e34f81e9ae813b..00000000000000
--- a/arch/sh/boards/mach-r2d/irq.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/rts7751r2d/irq.c
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
- *
- * Modified for RTS7751R2D by
- * Atom Create Engineering Co., Ltd. 2002.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-
-#define R2D_NR_IRL 13
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources (R2D-1 and R2D-PLUS) */
- EXT, /* EXT_INT0-3 */
- RTC_T, RTC_A, /* Real Time Clock */
- AX88796, /* Ethernet controller (R2D-1 board) */
- KEY, /* Key input (R2D-PLUS board) */
- SDCARD, /* SD Card */
- CF_CD, CF_IDE, /* CF Card Detect + CF IDE */
- SM501, /* SM501 aka Voyager */
- PCI_INTD_RTL8139, /* Ethernet controller */
- PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
- PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
- PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */
- PCI_INTA_SLOT, /* PCI Slot 3.3v */
- TP, /* Touch Panel */
-};
-
-#ifdef CONFIG_RTS7751R2D_1
-
-/* Vectors for R2D-1 */
-static struct intc_vect vectors_r2d_1[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-1 */
-static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, AX88796,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-1 */
-static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
- NULL, mask_registers_r2d_1, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_1 */
-
-#ifdef CONFIG_RTS7751R2D_PLUS
-
-/* Vectors for R2D-PLUS */
-static struct intc_vect vectors_r2d_plus[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-PLUS */
-static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, KEY,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-PLUS */
-static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
- NULL, mask_registers_r2d_plus, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_PLUS */
-
-static unsigned char irl2irq[R2D_NR_IRL];
-
-int rts7751r2d_irq_demux(int irq)
-{
- if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_rts7751r2d_IRQ(void)
-{
- struct intc_desc *d;
-
- switch (__raw_readw(PA_VERREG) & 0xf0) {
-#ifdef CONFIG_RTS7751R2D_PLUS
- case 0x10:
- printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
- d = &intc_desc_r2d_plus;
- memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
- break;
-#endif
-#ifdef CONFIG_RTS7751R2D_1
- case 0x00: /* according to manual */
- case 0x30: /* in reality */
- printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
- d = &intc_desc_r2d_1;
- memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
- break;
-#endif
- default:
- printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
- __raw_readw(PA_VERREG));
- return;
- }
-
- register_intc_controller(d);
-}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
deleted file mode 100644
index 3bc52f651d9611..00000000000000
--- a/arch/sh/boards/mach-r2d/setup.c
+++ /dev/null
@@ -1,305 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Sales RTS7751R2D Support.
- *
- * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ata_platform.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <asm/machvec.h>
-#include <mach/r2d.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-#include <asm/spi.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c,
- .flags = IORESOURCE_MEM,
- },
-#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
- [2] = {
- .start = IRQ_CF_IDE,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "rtc-r9701",
- .max_speed_hz = 1000000,
- .mode = SPI_MODE_3,
- },
-};
-
-static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
-{
- BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
- __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
-}
-
-static struct sh_spi_info spi_info = {
- .num_chipselect = 1,
- .chip_select = r2d_chip_select,
-};
-
-static struct resource spi_sh_sci_resources[] = {
- {
- .start = 0xffe00000,
- .end = 0xffe0001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device spi_sh_sci_device = {
- .name = "spi_sh_sci",
- .id = -1,
- .num_resources = ARRAY_SIZE(spi_sh_sci_resources),
- .resource = spi_sh_sci_resources,
- .dev = {
- .platform_data = &spi_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OUTPORT,
- .end = PA_OUTPORT,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x13e00000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x13e00000,
- .end = 0x13ffffff,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_VOYAGER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode = {
- .pixclock = 35714,
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .upper_margin = 35,
- .lower_margin = 0,
- .hsync_len = 96,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .flags = (SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT),
-
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
- .flags = SM501_FBPD_SWAP_FB_ENDIAN,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct mtd_partition r2d_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Environment",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(r2d_partitions),
- .parts = r2d_partitions,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x02000000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rts7751r2d_devices[] __initdata = {
- &sm501_device,
- &heartbeat_device,
- &spi_sh_sci_device,
-};
-
-/*
- * The CF is connected with a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init rts7751r2d_devices_setup(void)
-{
- if (register_trapped_io(&cf_trapped_io) == 0)
- platform_device_register(&cf_ide_device);
-
- if (mach_is_r2d_plus())
- platform_device_register(&flash_device);
-
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-
- return platform_add_devices(rts7751r2d_devices,
- ARRAY_SIZE(rts7751r2d_devices));
-}
-device_initcall(rts7751r2d_devices_setup);
-
-static void rts7751r2d_power_off(void)
-{
- __raw_writew(0x0001, PA_POWOFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init rts7751r2d_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
- u16 ver = __raw_readw(PA_VERREG);
-
- printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
-
- printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
- (ver >> 4) & 0xf, ver & 0xf);
-
- __raw_writew(0x0000, PA_OUTPORT);
- pm_power_off = rts7751r2d_power_off;
-
- /* sm501 dram configuration:
- * ColSizeX = 11 - External Memory Column Size: 256 words.
- * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
- * RstX = 1 - External Memory Reset: Normal.
- * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
- * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks.
- * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
- * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
- * Rst = 1 - Internal Memory Reset: Normal.
- * RA = 1 - Internal Memory Remain in Active State: Do not remain.
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rts7751r2d __initmv = {
- .mv_name = "RTS7751R2D",
- .mv_setup = rts7751r2d_setup,
- .mv_init_irq = init_rts7751r2d_IRQ,
- .mv_irq_demux = rts7751r2d_irq_demux,
-};
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
deleted file mode 100644
index f0299bc4416f80..00000000000000
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RSK
-
-choice
- prompt "RSK+ options"
- default SH_RSK7203
-
-config SH_RSK7201
- bool "RSK7201"
- depends on CPU_SUBTYPE_SH7201
-
-config SH_RSK7203
- bool "RSK7203"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7203
-
-config SH_RSK7264
- bool "RSK2+SH7264"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7264
-
-config SH_RSK7269
- bool "RSK2+SH7269"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7269
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
deleted file mode 100644
index 43cca39a9fe612..00000000000000
--- a/arch/sh/boards/mach-rsk/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o
-obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o
-obj-$(CONFIG_SH_RSK7264) += devices-rsk7264.o
-obj-$(CONFIG_SH_RSK7269) += devices-rsk7269.o
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
deleted file mode 100644
index e6b05d4588b7b9..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ 7203 Support.
- *
- * Copyright (C) 2008 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <cpu/sh7203.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct gpio_led rsk7203_gpio_leds[] = {
- {
- .name = "green",
- .gpio = GPIO_PE10,
- .active_low = 1,
- }, {
- .name = "orange",
- .default_trigger = "nand-disk",
- .gpio = GPIO_PE12,
- .active_low = 1,
- }, {
- .name = "red:timer",
- .default_trigger = "timer",
- .gpio = GPIO_PC14,
- .active_low = 1,
- }, {
- .name = "red:heartbeat",
- .default_trigger = "heartbeat",
- .gpio = GPIO_PE11,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
- .leds = rsk7203_gpio_leds,
- .num_leds = ARRAY_SIZE(rsk7203_gpio_leds),
-};
-
-static struct platform_device led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rsk7203_gpio_leds_info,
- },
-};
-
-static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
- {
- .code = BTN_0,
- .gpio = GPIO_PB0,
- .active_low = 1,
- .desc = "SW1",
- }, {
- .code = BTN_1,
- .gpio = GPIO_PB1,
- .active_low = 1,
- .desc = "SW2",
- }, {
- .code = BTN_2,
- .gpio = GPIO_PB2,
- .active_low = 1,
- .desc = "SW3",
- },
-};
-
-static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
- .buttons = rsk7203_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table),
- .poll_interval = 50, /* default to 50ms */
-};
-
-static struct platform_device keys_device = {
- .name = "gpio-keys-polled",
- .dev = {
- .platform_data = &rsk7203_gpio_keys_info,
- },
-};
-
-static struct platform_device *rsk7203_devices[] __initdata = {
- &smsc911x_device,
- &led_device,
- &keys_device,
-};
-
-static int __init rsk7203_devices_setup(void)
-{
- /* Select pins for SCIF0 */
- gpio_request(GPIO_FN_TXD0, NULL);
- gpio_request(GPIO_FN_RXD0, NULL);
-
- /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
- __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
- gpio_request(GPIO_FN_IRQ0_PB, NULL);
-
- return platform_add_devices(rsk7203_devices,
- ARRAY_SIZE(rsk7203_devices));
-}
-device_initcall(rsk7203_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7264.c b/arch/sh/boards/mach-rsk/devices-rsk7264.c
deleted file mode 100644
index eaf700a20b833e..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7264.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7264 Support.
- *
- * Copyright (C) 2012 Renesas Electronics Europe
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x28000000,
- .end = 0x280000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 65,
- .end = 65,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7264_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7264_devices_setup(void)
-{
- return platform_add_devices(rsk7264_devices,
- ARRAY_SIZE(rsk7264_devices));
-}
-device_initcall(rsk7264_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c
deleted file mode 100644
index 4b1e386b51dd64..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7269.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7269 Support
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7269_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7269_devices_setup(void)
-{
- return platform_add_devices(rsk7269_devices,
- ARRAY_SIZE(rsk7269_devices));
-}
-device_initcall(rsk7269_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
deleted file mode 100644
index 9370c4fdc41e13..00000000000000
--- a/arch/sh/boards/mach-rsk/setup.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ Support.
- *
- * Copyright (C) 2008 Paul Mundt
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct mtd_partition rsk_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = rsk_partitions,
- .nr_parts = ARRAY_SIZE(rsk_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x20000000,
- .end = 0x20400000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rsk_devices[] __initdata = {
- &flash_device,
-};
-
-static int __init rsk_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(rsk_devices,
- ARRAY_SIZE(rsk_devices));
-}
-device_initcall(rsk_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk __initmv = {
- .mv_name = "RSK+",
-};
diff --git a/arch/sh/boards/mach-sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
deleted file mode 100644
index d4392efd2f74db..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_SDK7780
-
-choice
- prompt "SDK7780 options"
- default SH_SDK7780_BASE
-
-config SH_SDK7780_BASE
- bool "SDK7780 with base-board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the expansion
- baseboard devices. If in doubt, say Y.
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
deleted file mode 100644
index 37e857f9a55a26..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SDK7780 specific parts of the kernel
-#
-obj-y := setup.o irq.o
-
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
deleted file mode 100644
index fa392f3dce266b..00000000000000
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sdk7780/irq.c
- *
- * Renesas Technology Europe SDK7780 Support.
- *
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/sdk7780.h>
-
-enum {
- UNUSED = 0,
- /* board specific interrupt sources */
- SMC91C111, /* Ethernet controller */
-};
-
-static struct intc_vect fpga_vectors[] __initdata = {
- INTC_IRQ(SMC91C111, IRQ_ETHERNET),
-};
-
-static struct intc_mask_reg fpga_mask_registers[] __initdata = {
- { 0, FPGA_IRQ0MR, 16,
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
- NULL, fpga_mask_registers, NULL, NULL);
-
-void __init init_sdk7780_IRQ(void)
-{
- printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
-
- __raw_writew(0xFFFF, FPGA_IRQ0MR);
- /* Setup IRL 0-3 */
- __raw_writew(0x0003, FPGA_IMSR);
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- register_intc_controller(&fpga_intc_desc);
-}
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
deleted file mode 100644
index 482761b780e406..00000000000000
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/sdk7780/setup.c
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <mach/sdk7780.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#define GPIO_PECR 0xFFEA0008
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ETHERNET,
- .end = IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *sdk7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init sdk7780_devices_setup(void)
-{
- return platform_add_devices(sdk7780_devices,
- ARRAY_SIZE(sdk7780_devices));
-}
-device_initcall(sdk7780_devices_setup);
-
-static void __init sdk7780_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(FPGA_FPVERR);
- u16 dateStamp = __raw_readw(FPGA_FPDATER);
-
- printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d), datestamp : %d\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf,
- dateStamp);
-
- /* Setup pin mux'ing for PCIC */
- __raw_writew(0x0000, GPIO_PECR);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Renesas SDK7780-R3" ,
- .mv_setup = sdk7780_setup,
- .mv_init_irq = init_sdk7780_IRQ,
-};
-
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
deleted file mode 100644
index 731a87c694b3bc..00000000000000
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := fpga.o irq.o nmi.o setup.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
deleted file mode 100644
index a37e1e88c6b1f2..00000000000000
--- a/arch/sh/boards/mach-sdk7786/fpga.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/bcd.h>
-#include <mach/fpga.h>
-#include <linux/sizes.h>
-
-#define FPGA_REGS_OFFSET 0x03fff800
-#define FPGA_REGS_SIZE 0x490
-
-/*
- * The FPGA can be mapped in any of the generally available areas,
- * so we attempt to scan for it using the fixed SRSTR read magic.
- *
- * Once the FPGA is located, the rest of the mapping data for the other
- * components can be determined dynamically from its section mapping
- * registers.
- */
-static void __iomem *sdk7786_fpga_probe(void)
-{
- unsigned long area;
- void __iomem *base;
-
- /*
- * Iterate over all of the areas where the FPGA could be mapped.
- * The possible range is anywhere from area 0 through 6, area 7
- * is reserved.
- */
- for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
- base = ioremap(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
- if (!base) {
- /* Failed to remap this area, move along. */
- continue;
- }
-
- if (ioread16(base + SRSTR) == SRSTR_MAGIC)
- return base; /* Found it! */
-
- iounmap(base);
- }
-
- return NULL;
-}
-
-void __iomem *sdk7786_fpga_base;
-
-void __init sdk7786_fpga_init(void)
-{
- u16 version, date;
-
- sdk7786_fpga_base = sdk7786_fpga_probe();
- if (unlikely(!sdk7786_fpga_base)) {
- panic("FPGA detection failed.\n");
- return;
- }
-
- version = fpga_read_reg(FPGAVR);
- date = fpga_read_reg(FPGADR);
-
- pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
- bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
- ((date >> 12) & 0xf) + 2000,
- (date >> 8) & 0xf, bcd2bin(date & 0xff));
-}
diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c
deleted file mode 100644
index c4587d1013e611..00000000000000
--- a/arch/sh/boards/mach-sdk7786/gpio.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA USRGPIR Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <mach/fpga.h>
-
-#define NR_FPGA_GPIOS 8
-
-static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
- "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
-};
-
-static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- /* always in */
- return 0;
-}
-
-static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
-}
-
-static struct gpio_chip usrgpir_gpio_chip = {
- .label = "sdk7786-fpga",
- .names = usrgpir_gpio_names,
- .direction_input = usrgpir_gpio_direction_input,
- .get = usrgpir_gpio_get,
- .base = -1, /* don't care */
- .ngpio = NR_FPGA_GPIOS,
-};
-
-static int __init usrgpir_gpio_setup(void)
-{
- return gpiochip_add_data(&usrgpir_gpio_chip, NULL);
-}
-device_initcall(usrgpir_gpio_setup);
diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c
deleted file mode 100644
index 340c306ea95239..00000000000000
--- a/arch/sh/boards/mach-sdk7786/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA IRQ Controller Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-
-enum {
- ATA_IRQ_BIT = 1,
- SPI_BUSY_BIT = 2,
- LIRQ5_BIT = 3,
- LIRQ6_BIT = 4,
- LIRQ7_BIT = 5,
- LIRQ8_BIT = 6,
- KEY_IRQ_BIT = 7,
- PEN_IRQ_BIT = 8,
- ETH_IRQ_BIT = 9,
- RTC_ALARM_BIT = 10,
- CRYSTAL_FAIL_BIT = 12,
- ETH_PME_BIT = 14,
-};
-
-void __init sdk7786_init_irq(void)
-{
- unsigned int tmp;
-
- /* Enable priority encoding for all IRLs */
- fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
-
- /* Clear FPGA interrupt status registers */
- fpga_write_reg(0x0000, INTASR);
- fpga_write_reg(0x0000, INTBSR);
-
- /* Unmask FPGA interrupts */
- tmp = fpga_read_reg(INTAMR);
- tmp &= ~(1 << ETH_IRQ_BIT);
- fpga_write_reg(tmp, INTAMR);
-
- plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
deleted file mode 100644
index afba49679a1219..00000000000000
--- a/arch/sh/boards/mach-sdk7786/nmi.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA NMI Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-
-enum {
- NMI_MODE_MANUAL,
- NMI_MODE_AUX,
- NMI_MODE_MASKED,
- NMI_MODE_ANY,
- NMI_MODE_UNKNOWN,
-};
-
-/*
- * Default to the manual NMI switch.
- */
-static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
-
-static int __init nmi_mode_setup(char *str)
-{
- if (!str)
- return 0;
-
- if (strcmp(str, "manual") == 0)
- nmi_mode = NMI_MODE_MANUAL;
- else if (strcmp(str, "aux") == 0)
- nmi_mode = NMI_MODE_AUX;
- else if (strcmp(str, "masked") == 0)
- nmi_mode = NMI_MODE_MASKED;
- else if (strcmp(str, "any") == 0)
- nmi_mode = NMI_MODE_ANY;
- else {
- nmi_mode = NMI_MODE_UNKNOWN;
- pr_warn("Unknown NMI mode %s\n", str);
- }
-
- printk("Set NMI mode to %d\n", nmi_mode);
- return 0;
-}
-early_param("nmi_mode", nmi_mode_setup);
-
-void __init sdk7786_nmi_init(void)
-{
- unsigned int source, mask, tmp;
-
- switch (nmi_mode) {
- case NMI_MODE_MANUAL:
- source = NMISR_MAN_NMI;
- mask = NMIMR_MAN_NMIM;
- break;
- case NMI_MODE_AUX:
- source = NMISR_AUX_NMI;
- mask = NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_ANY:
- source = NMISR_MAN_NMI | NMISR_AUX_NMI;
- mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_MASKED:
- case NMI_MODE_UNKNOWN:
- default:
- source = mask = 0;
- break;
- }
-
- /* Set the NMI source */
- tmp = fpga_read_reg(NMISR);
- tmp &= ~NMISR_MASK;
- tmp |= source;
- fpga_write_reg(tmp, NMISR);
-
- /* And the IRQ masking */
- fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
-}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
deleted file mode 100644
index d183026dbeb19a..00000000000000
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe SDK7786 Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resource = {
- .start = 0x07fff8b0,
- .end = 0x07fff8b0 + sizeof(u16) - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0x07ffff00,
- .end = 0x07ffff00 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource smbus_fpga_resource = {
- .start = 0x07fff9e0,
- .end = 0x07fff9e0 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_fpga_device = {
- .name = "i2c-sdk7786",
- .id = 0,
- .num_resources = 1,
- .resource = &smbus_fpga_resource,
-};
-
-static struct resource smbus_pcie_resource = {
- .start = 0x07fffc30,
- .end = 0x07fffc30 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_pcie_device = {
- .name = "i2c-sdk7786",
- .id = 1,
- .num_resources = 1,
- .resource = &smbus_pcie_resource,
-};
-
-static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
- {
- I2C_BOARD_INFO("max6900", 0x68),
- },
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &smbus_fpga_device,
- &smbus_pcie_device,
-};
-
-static int sdk7786_i2c_setup(void)
-{
- unsigned int tmp;
-
- /*
- * Hand over I2C control to the FPGA.
- */
- tmp = fpga_read_reg(SBCR);
- tmp &= ~SCBR_I2CCEN;
- tmp |= SCBR_I2CMEN;
- fpga_write_reg(tmp, SBCR);
-
- return i2c_register_board_info(0, sdk7786_i2c_devices,
- ARRAY_SIZE(sdk7786_i2c_devices));
-}
-
-static int __init sdk7786_devices_setup(void)
-{
- int ret;
-
- ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return sdk7786_i2c_setup();
-}
-device_initcall(sdk7786_devices_setup);
-
-static int sdk7786_mode_pins(void)
-{
- return fpga_read_reg(MODSWR);
-}
-
-/*
- * FPGA-driven PCIe clocks
- *
- * Historically these include the oscillator, clock B (slots 2/3/4) and
- * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
- * everything under a single PCIe clocks enable bit that happens to map
- * to the same bit position as the oscillator bit for earlier FPGA
- * versions.
- *
- * Given that the legacy clocks have the side-effect of shutting the CPU
- * off through the FPGA along with the PCI slots, we simply leave them in
- * their initial state and don't bother registering them with the clock
- * framework.
- */
-static int sdk7786_pcie_clk_enable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
- return 0;
-}
-
-static void sdk7786_pcie_clk_disable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
-}
-
-static struct sh_clk_ops sdk7786_pcie_clk_ops = {
- .enable = sdk7786_pcie_clk_enable,
- .disable = sdk7786_pcie_clk_disable,
-};
-
-static struct clk sdk7786_pcie_clk = {
- .ops = &sdk7786_pcie_clk_ops,
-};
-
-static struct clk_lookup sdk7786_pcie_cl = {
- .con_id = "pcie_plat_clk",
- .clk = &sdk7786_pcie_clk,
-};
-
-static int sdk7786_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- /*
- * Setup the FPGA clocks.
- */
- ret = clk_register(&sdk7786_pcie_clk);
- if (unlikely(ret)) {
- pr_err("FPGA clock registration failed\n");
- return ret;
- }
-
- clkdev_add(&sdk7786_pcie_cl);
-
- return 0;
-}
-
-static void sdk7786_restart(char *cmd)
-{
- fpga_write_reg(0xa5a5, SRSTR);
-}
-
-static void sdk7786_power_off(void)
-{
- fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
-
- /*
- * It can take up to 20us for the R8C to do its job, back off and
- * wait a bit until we've been shut off. Even though newer FPGA
- * versions don't set the ACK bit, the latency issue remains.
- */
- while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
- cpu_sleep();
-}
-
-/* Initialize the board */
-static void __init sdk7786_setup(char **cmdline_p)
-{
- pr_info("Renesas Technology Europe SDK7786 support:\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- sdk7786_fpga_init();
- sdk7786_nmi_init();
-
- pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
-
- machine_ops.restart = sdk7786_restart;
- pm_power_off = sdk7786_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sdk7786 __initmv = {
- .mv_name = "SDK7786",
- .mv_setup = sdk7786_setup,
- .mv_mode_pins = sdk7786_mode_pins,
- .mv_clk_init = sdk7786_clk_init,
- .mv_init_irq = sdk7786_init_irq,
-};
diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c
deleted file mode 100644
index 7c6ca976f332fe..00000000000000
--- a/arch/sh/boards/mach-sdk7786/sram.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA SRAM Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-#include <asm/sram.h>
-#include <linux/sizes.h>
-
-static int __init fpga_sram_init(void)
-{
- unsigned long phys;
- unsigned int area;
- void __iomem *vaddr;
- int ret;
- u16 data;
-
- /* Enable FPGA SRAM */
- data = fpga_read_reg(LCLASR);
- data |= LCLASR_FRAMEN;
- fpga_write_reg(data, LCLASR);
-
- /*
- * FPGA_SEL determines the area mapping
- */
- area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
- if (unlikely(area == LCLASR_AREA_MASK)) {
- pr_err("FPGA memory unmapped.\n");
- return -ENXIO;
- }
-
- /*
- * The memory itself occupies a 2KiB range at the top of the area
- * immediately below the system registers.
- */
- phys = (area << 26) + SZ_64M - SZ_4K;
-
- /*
- * The FPGA SRAM resides in translatable physical space, so set
- * up a mapping prior to inserting it in to the pool.
- */
- vaddr = ioremap(phys, SZ_2K);
- if (unlikely(!vaddr)) {
- pr_err("Failed remapping FPGA memory.\n");
- return -ENXIO;
- }
-
- pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
- "(area %d) to pool.\n",
- SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
-
- ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
- if (unlikely(ret < 0)) {
- pr_err("Failed adding memory\n");
- iounmap(vaddr);
- return ret;
- }
-
- return 0;
-}
-postcore_initcall(fpga_sram_init);
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
deleted file mode 100644
index b40b30853ce376..00000000000000
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7206 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
deleted file mode 100644
index 2b15370829aef3..00000000000000
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <mach-se/mach/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL 0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1 0xfffe0802
-
-static void disable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set the priority in IPR to 0 */
- val = __raw_readw(INTC_IPR01);
- val &= mask;
- __raw_writew(val, INTC_IPR01);
- /* FPGA mask set */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 |= 0x0010;
- break;
- case IRQ1_IRQ:
- msk0 |= 0x000f;
- break;
- case IRQ3_IRQ:
- msk0 |= 0x0f00;
- msk1 |= 0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set priority in IPR back to original value */
- val = __raw_readw(INTC_IPR01);
- val |= value;
- __raw_writew(val, INTC_IPR01);
-
- /* FPGA mask reset */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- msk0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- msk0 &= ~0x0f00;
- msk1 &= ~0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(struct irq_data *data)
-{
- unsigned short sts0,sts1;
- unsigned int irq = data->irq;
-
- if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
- enable_se7206_irq(data);
- /* FPGA isr clear */
- sts0 = __raw_readw(INTSTS0);
- sts1 = __raw_readw(INTSTS1);
-
- switch (irq) {
- case IRQ0_IRQ:
- sts0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- sts0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- sts0 &= ~0x0f00;
- sts1 &= ~0x00ff;
- break;
- }
- __raw_writew(sts0, INTSTS0);
- __raw_writew(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
- .name = "SE7206-FPGA",
- .irq_mask = disable_se7206_irq,
- .irq_unmask = enable_se7206_irq,
- .irq_eoi = eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
- handle_level_irq, "level");
- disable_se7206_irq(irq_get_irq_data(irq));
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
- make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
- make_se7206_irq(IRQ1_IRQ); /* ATA */
- make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-
- __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
-
- /* FPGA System register setup*/
- __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
- __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
-
- /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- __raw_writew(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
deleted file mode 100644
index dc55d3a69665ee..00000000000000
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2007 - 2008 Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <mach-se/mach/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = PA_SMSC + 0x300,
- .end = PA_SMSC + 0x300 + 0x020 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
- &smc91x_device,
- &heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
- return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-device_initcall(se7206_devices_setup);
-
-static int se7206_mode_pins(void)
-{
- return MODE_PIN1 | MODE_PIN2;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_init_irq = init_se7206_IRQ,
- .mv_mode_pins = se7206_mode_pins,
-};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
deleted file mode 100644
index e058661091a26f..00000000000000
--- a/arch/sh/boards/mach-se/7343/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7343 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
deleted file mode 100644
index f9f3b14f70d574..00000000000000
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2012 Paul Mundt
- *
- * Based on linux/arch/sh/boards/se/7343/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#define DRV_NAME "SE7343-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7343.h>
-
-#define PA_CPLD_BASE_ADDR 0x11400000
-#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
-#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-
-static void __iomem *se7343_irq_regs;
-struct irq_domain *se7343_irq_domain;
-
-static void se7343_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
-
- for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7343_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7343_domain_init(void)
-{
- int i;
-
- se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7343_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7343_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7343_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7343_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = PA_CPLD_IMSK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
-{
- se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
- if (unlikely(!se7343_irq_regs)) {
- pr_err("Failed to remap CPLD\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7343_domain_init();
- se7343_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
deleted file mode 100644
index fe0e550601a2e2..00000000000000
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/usb/isp116x.h>
-#include <linux/delay.h>
-#include <linux/irqdomain.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7343.h>
-#include <asm/heartbeat.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 128 * 1024,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 31 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
-
-static struct plat_serial8250_port serial_platform_data[] = {
- [0] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x16000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- [1] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x17000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- { },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static void isp116x_delay(struct device *dev, int delay)
-{
- ndelay(delay);
-}
-
-static struct resource usb_resources[] = {
- [0] = {
- .start = 0x11800000,
- .end = 0x11800001,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x11800002,
- .end = 0x11800003,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp116x_platform_data usb_platform_data = {
- .sel15Kres = 1,
- .oc_enable = 1,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_enable = 0,
- .delay = isp116x_delay,
-};
-
-static struct platform_device usb_device = {
- .name = "isp116x-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(usb_resources),
- .resource = usb_resources,
- .dev = {
- .platform_data = &usb_platform_data,
- },
-
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &uart_device,
- &usb_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
- /* Wire-up dynamic vectors */
- serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTA);
- serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTB);
- usb_resources[2].start = usb_resources[2].end =
- irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
-
- return platform_add_devices(sh7343se_platform_devices,
- ARRAY_SIZE(sh7343se_platform_devices));
-}
-device_initcall(sh7343se_devices_setup);
-
-/*
- * Initialize the board
- */
-static void __init sh7343se_setup(char **cmdline_p)
-{
- __raw_writew(0xf900, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- __raw_writew(0x0020, PORT_PSELD);
-
- printk(KERN_INFO "MS7343CP01 Setup...done\n");
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
- .mv_name = "SolutionEngine 7343",
- .mv_setup = sh7343se_setup,
- .mv_init_irq = init_7343se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
deleted file mode 100644
index 900d93cfb6a531..00000000000000
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 770x SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
deleted file mode 100644
index 66e2c8aa0b69f3..00000000000000
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- /* This is default value */
- { 13, 0, 8, 0x0f-13, },
- { 5 , 0, 4, 0x0f- 5, },
- { 10, 1, 0, 0x0f-10, },
- { 7 , 2, 4, 0x0f- 7, },
- { 3 , 2, 0, 0x0f- 3, },
- { 1 , 3, 12, 0x0f- 1, },
- { 12, 3, 4, 0x0f-12, }, /* LAN */
- { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */
- { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */
- { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */
- { 0 , 5, 12, 0x0f , },
- { 4 , 5, 4, 0x0f- 4, },
- { 8 , 6, 12, 0x0f- 8, },
- { 9 , 6, 8, 0x0f- 9, },
- { 11, 6, 4, 0x0f-11, },
-#else
- { 14, 0, 8, 0x0f-14, },
- { 12, 0, 4, 0x0f-12, },
- { 8, 1, 4, 0x0f- 8, },
- { 6, 2, 12, 0x0f- 6, },
- { 5, 2, 8, 0x0f- 5, },
- { 4, 2, 4, 0x0f- 4, },
- { 3, 2, 0, 0x0f- 3, },
- { 1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
- /* ST NIC */
- { 10, 3, 4, 0x0f-10, }, /* LAN */
-#endif
- /* MRSHPC IRQs setting */
- { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */
- { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */
- { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */
- { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */
- { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "IPR-se770x",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
deleted file mode 100644
index 412326d59e6fce..00000000000000
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sh_eth.h>
-#include <mach-se/mach/se.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CFCARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-/* SH771X Ethernet driver */
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = PHY_ID,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth0_resources[] = {
- [0] = {
- .start = SH_ETH0_BASE,
- .end = SH_ETH0_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH0_IRQ,
- .end = SH_ETH0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth0_device = {
- .name = "sh771x-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .resource = sh_eth0_resources,
-};
-
-static struct resource sh_eth1_resources[] = {
- [0] = {
- .start = SH_ETH1_BASE,
- .end = SH_ETH1_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH1_IRQ,
- .end = SH_ETH1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth1_device = {
- .name = "sh771x-ether",
- .id = 1,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .resource = sh_eth1_resources,
-};
-#endif
-
-static struct platform_device *se_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
- &sh_eth0_device,
- &sh_eth1_device,
-#endif
-};
-
-static int __init se_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_setup = smsc_setup,
- .mv_init_irq = init_se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
deleted file mode 100644
index 09436f10ddf198..00000000000000
--- a/arch/sh/boards/mach-se/7721/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
deleted file mode 100644
index e6ef2a2655c37c..00000000000000
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7721.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
- { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
- NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
- /* PPCR */
- __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
-
- register_intc_controller(&intc_desc);
- intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
deleted file mode 100644
index 3af724dc4ba44a..00000000000000
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <mach-se/mach/se7721.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = MRSHPC_IRQ0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
- &cf_ide_device,
- &heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
- /* for USB */
- __raw_writew(0x0000, 0xA405010C); /* PGCR */
- __raw_writew(0x0000, 0xA405010E); /* PHCR */
- __raw_writew(0x00AA, 0xA4050118); /* PPCR */
- __raw_writew(0x0000, 0xA4050124); /* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
- .mv_name = "Solution Engine 7721",
- .mv_setup = se7721_setup,
- .mv_init_irq = init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
deleted file mode 100644
index a5e89c0c6bb2d4..00000000000000
--- a/arch/sh/boards/mach-se/7722/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
deleted file mode 100644
index efa96edd47dc5f..00000000000000
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- */
-#define DRV_NAME "SE7722-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7722.h>
-
-#define IRQ01_BASE_ADDR 0x11800000
-#define IRQ01_MODE_REG 0
-#define IRQ01_STS_REG 4
-#define IRQ01_MASK_REG 8
-
-static void __iomem *se7722_irq_regs;
-struct irq_domain *se7722_irq_domain;
-
-static void se7722_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
-
- for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7722_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7722_domain_init(void)
-{
- int i;
-
- se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7722_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7722_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7722_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7722_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = IRQ01_MASK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize FPGA IRQs
- */
-void __init init_se7722_IRQ(void)
-{
- se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
- if (unlikely(!se7722_irq_regs)) {
- printk("Failed to remap IRQ01 regs\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7722_domain_init();
- se7722_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
deleted file mode 100644
index 2cd4a2e84b930c..00000000000000
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/irqdomain.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <mach-se/mach/se7722.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7722.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = { /* SW1 -> SW30 */
- KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
- KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
- KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
- KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
- KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
- KEY_Z,
- KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &cf_ide_device,
- &sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
- mrshpc_setup_windows();
-
- /* Wire-up dynamic vectors */
- cf_ide_resources[2].start = cf_ide_resources[2].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
-
- smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
-
- return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
- __raw_writew(0x010D, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
- /* LCDC I/O */
- __raw_writew(0x0020, PORT_PSELD);
-
- /* SIOF1*/
- __raw_writew(0x0003, PORT_PSELB);
- __raw_writew(0xe000, PORT_PSELC);
- __raw_writew(0x0000, PORT_PKCR);
-
- /* LCDC */
- __raw_writew(0x4020, PORT_PHCR);
- __raw_writew(0x0000, PORT_PLCR);
- __raw_writew(0x0000, PORT_PMCR);
- __raw_writew(0x0002, PORT_PRCR);
- __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
-
- /* KEYSC */
- __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- __raw_writew(0x0000, PORT_PYCR);
- __raw_writew(0x0000, PORT_PZCR);
- __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
- .mv_name = "Solution Engine 7722" ,
- .mv_setup = se7722_setup ,
- .mv_init_irq = init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
deleted file mode 100644
index 6c6112b24617d0..00000000000000
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
deleted file mode 100644
index 14ce3024738f3b..00000000000000
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/irq.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on linux/arch/sh/boards/se/7722/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7724 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-#include <linux/topology.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach-se/mach/se7724.h>
-
-struct fpga_irq {
- unsigned long sraddr;
- unsigned long mraddr;
- unsigned short mask;
- unsigned int base;
-};
-
-static unsigned int fpga2irq(unsigned int irq)
-{
- if (irq >= IRQ0_BASE &&
- irq <= IRQ0_END)
- return IRQ0_IRQ;
- else if (irq >= IRQ1_BASE &&
- irq <= IRQ1_END)
- return IRQ1_IRQ;
- else
- return IRQ2_IRQ;
-}
-
-static struct fpga_irq get_fpga_irq(unsigned int irq)
-{
- struct fpga_irq set;
-
- switch (irq) {
- case IRQ0_IRQ:
- set.sraddr = IRQ0_SR;
- set.mraddr = IRQ0_MR;
- set.mask = IRQ0_MASK;
- set.base = IRQ0_BASE;
- break;
- case IRQ1_IRQ:
- set.sraddr = IRQ1_SR;
- set.mraddr = IRQ1_MR;
- set.mask = IRQ1_MASK;
- set.base = IRQ1_BASE;
- break;
- default:
- set.sraddr = IRQ2_SR;
- set.mraddr = IRQ2_MR;
- set.mask = IRQ2_MASK;
- set.base = IRQ2_BASE;
- break;
- }
-
- return set;
-}
-
-static void disable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
-}
-
-static void enable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
-}
-
-static struct irq_chip se7724_irq_chip __read_mostly = {
- .name = "SE7724-FPGA",
- .irq_mask = disable_se7724_irq,
- .irq_unmask = enable_se7724_irq,
-};
-
-static void se7724_irq_demux(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = __raw_readw(set.sraddr);
- unsigned int ext_irq = set.base;
-
- intv &= set.mask;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7724_IRQ(void)
-{
- int irq_base, i;
-
- __raw_writew(0xffff, IRQ0_MR); /* mask all */
- __raw_writew(0xffff, IRQ1_MR); /* mask all */
- __raw_writew(0xffff, IRQ2_MR); /* mask all */
- __raw_writew(0x0000, IRQ0_SR); /* clear irq */
- __raw_writew(0x0000, IRQ1_SR); /* clear irq */
- __raw_writew(0x0000, IRQ2_SR); /* clear irq */
- __raw_writew(0x002a, IRQ_MODE); /* set irq type */
-
- irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
- SE7724_FPGA_IRQ_NR, numa_node_id());
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for FPGA\n", __func__);
- return;
- }
-
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
- irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
- handle_level_irq, "level");
-
- irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
deleted file mode 100644
index 61c1fe78d71a05..00000000000000
--- a/arch/sh/boards/mach-se/7724/sdram.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * MS7724SE sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ms7724se_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ms7724se_sdram_enter_end)
-
- .balign 4
-ENTRY(ms7724se_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* CPG: setup clocks before restarting external memory */
-
- ED 0xA4150024, 0x00004000 /* PLLCR */
-
- mov.l FRQCRA,r0
- mov.l @r0,r3
- mov.l KICK,r1
- or r1, r3
- mov.l r3, @r0
-
- mov.l LSTATS,r0
- mov #1,r1
-WAIT_LSTATS:
- mov.l @r0,r3
- tst r1,r3
- bf WAIT_LSTATS
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-FRQCRA: .long 0xa4150000
-KICK: .long 0x80000000
-LSTATS: .long 0xa4150060
-
-ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
deleted file mode 100644
index b60a2626e18b27..00000000000000
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ /dev/null
@@ -1,986 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/setup.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/smc91x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach-se/mach/se7724.h>
-#include <media/drv-intf/renesas-ceu.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/*
- * SWx 1234 5678
- * ------------------------------------
- * SW31 : 1001 1100 : default
- * SW32 : 0111 1111 : use on board flash
- *
- * SW41 : abxx xxxx -> a = 0 : Analog monitor
- * 1 : Digital monitor
- * b = 0 : VGA
- * 1 : 720p
- */
-
-/*
- * about 720p
- *
- * When you use 1280 x 720 lcdc output,
- * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
- * and change SW41 to use 720p
- */
-
-/*
- * about sound
- *
- * This setup.c supports FSI slave mode.
- * Please change J20, J21, J22 pin to 1-2 connection.
- */
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x1a300300,
- .end = 0x1a30030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ0_SMC,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* LCDC */
-static const struct fb_videomode lcdc_720p_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- },
-};
-
-static const struct fb_videomode lcdc_vga_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .hsync_len = 96,
- .upper_margin = 33,
- .lower_margin = 10,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .clock_divider = 1,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* "ceu.1" clock */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* FSI */
-/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_ak4642_info = {
- .name = "AK4642",
- .card = "FSIA-AK4642",
- .codec = "ak4642-codec.0-0012",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsia-dai",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
-};
-
-static struct platform_device fsi_ak4642_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_ak4642_info,
- },
-};
-
-/* KEYSC in SoC (Needs SW33-2 set to ON) */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .keycodes = {
- KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
- KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
- KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
- KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
- KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
- KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
- },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* SH Eth */
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8187 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb0_host_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
- .resource = sh7724_usb0_host_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb1_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb1_gadget_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb1_gadget_device = {
- .name = "r8a66597_udc",
- .id = 1, /* USB1 */
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb1_gadget_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
- .resource = sh7724_usb1_gadget_resources,
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn7_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 0,
- .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
- .resource = sdhi0_cn7_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct resource sdhi1_cn8_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi1_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn8_device = {
- .name = "sh_mobile_sdhi",
- .id = 1,
- .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
- .resource = sdhi1_cn8_resources,
- .dev = {
- .platform_data = &sh7724_sdhi1_data,
- },
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- /* With open J18 jumper address is 0x21 */
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-static struct platform_device *ms7724se_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ms7724se_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &lcdc_device,
- &nor_flash_device,
- &keysc_device,
- &sh_eth_device,
- &sh7724_usb0_host_device,
- &sh7724_usb1_gadget_device,
- &fsi_device,
- &fsi_ak4642_device,
- &sdhi0_cn7_device,
- &sdhi1_cn8_device,
- &irda_device,
- &vou_device,
-};
-
-/* I2C device */
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("ak4642", 0x12),
- },
-};
-
-#define EEPROM_OP 0xBA206000
-#define EEPROM_ADR 0xBA206004
-#define EEPROM_DATA 0xBA20600C
-#define EEPROM_STAT 0xBA206010
-#define EEPROM_STRT 0xBA206014
-
-static int __init sh_eth_is_eeprom_ready(void)
-{
- int t = 10000;
-
- while (t--) {
- if (!__raw_readw(EEPROM_STAT))
- return 1;
- udelay(1);
- }
-
- printk(KERN_ERR "ms7724se can not access to eeprom\n");
- return 0;
-}
-
-static void __init sh_eth_init(void)
-{
- int i;
- u16 mac;
-
- /* check EEPROM status */
- if (!sh_eth_is_eeprom_ready())
- return;
-
- /* read MAC addr from EEPROM */
- for (i = 0 ; i < 3 ; i++) {
- __raw_writew(0x0, EEPROM_OP); /* read */
- __raw_writew(i*2, EEPROM_ADR);
- __raw_writew(0x1, EEPROM_STRT);
- if (!sh_eth_is_eeprom_ready())
- return;
-
- mac = __raw_readw(EEPROM_DATA);
- sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
- sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
- }
-}
-
-#define SW4140 0xBA201000
-#define FPGA_OUT 0xBA200400
-#define PORT_HIZA 0xA4050158
-#define PORT_MSELCRB 0xA4050182
-
-#define SW41_A 0x0100
-#define SW41_B 0x0200
-#define SW41_C 0x0400
-#define SW41_D 0x0800
-#define SW41_E 0x1000
-#define SW41_F 0x2000
-#define SW41_G 0x4000
-#define SW41_H 0x8000
-
-extern char ms7724se_sdram_enter_start;
-extern char ms7724se_sdram_enter_end;
-extern char ms7724se_sdram_leave_start;
-extern char ms7724se_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- return 0;
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- u16 sw = __raw_readw(SW4140); /* select camera, monitor */
- struct clk *clk;
- u16 fpga_out;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ms7724se_sdram_enter_start,
- &ms7724se_sdram_enter_end,
- &ms7724se_sdram_leave_start,
- &ms7724se_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Reset Release */
- fpga_out = __raw_readw(FPGA_OUT);
- /* bit4: NTSC_PDN, bit5: NTSC_RESET */
- fpga_out &= ~((1 << 1) | /* LAN */
- (1 << 4) | /* AK8813 PDN */
- (1 << 5) | /* AK8813 RESET */
- (1 << 6) | /* VIDEO DAC */
- (1 << 7) | /* AK4643 */
- (1 << 8) | /* IrDA */
- (1 << 12) | /* USB0 */
- (1 << 14)); /* RMII */
- __raw_writew(fpga_out | (1 << 4), FPGA_OUT);
-
- udelay(10);
-
- /* AK8813 RESET */
- __raw_writew(fpga_out | (1 << 5), FPGA_OUT);
-
- udelay(10);
-
- __raw_writew(fpga_out, FPGA_OUT);
-
- /* turn on USB clocks, use external clock */
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
-
- /* Let LED9 show STATUS2 */
- gpio_request(GPIO_FN_STATUS2, NULL);
-
- /* Lit LED10 show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit LED11 show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable USB0 port */
- __raw_writew(0x0600, 0xa40501d4);
-
- /* enable USB1 port */
- __raw_writew(0x0600, 0xa4050192);
-
- /* enable IRQ 0,1,2 */
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_request(GPIO_FN_INTC_IRQ2, NULL);
-
- /* enable SCIFA3 */
- gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKA, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
- gpio_request(GPIO_FN_FSIOASD, NULL);
- gpio_request(GPIO_FN_FSIIABCK, NULL);
- gpio_request(GPIO_FN_FSIIALRCK, NULL);
- gpio_request(GPIO_FN_FSIOABCK, NULL);
- gpio_request(GPIO_FN_FSIOALRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI A */
- clk = clk_get(NULL, "fsia_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimcka_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimcka_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- /* SDHI0 connected to cn7 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- /* SDHI1 connected to cn8 */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
-
- /*
- * enable SH-Eth
- *
- * please remove J33 pin from your board !!
- *
- * ms7724 board should not use GPIO_FN_LNKSTA pin
- * So, This time PTX5 is set to input pin
- */
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_PTX5, NULL);
- gpio_direction_input(GPIO_PTX5);
- sh_eth_init();
-
- if (sw & SW41_B) {
- /* 720p */
- lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
- } else {
- /* VGA */
- lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
- }
-
- if (sw & SW41_A) {
- /* Digital monitor */
- lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].flags = 0;
- } else {
- /* Analog monitor */
- lcdc_info.ch[0].interface_type = RGB24;
- lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
- }
-
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ms7724se_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[0]);
-
- device_initialize(&ms7724se_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[1]);
-
- return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ms7724se_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ms7724se __initmv = {
- .mv_name = "ms7724se",
- .mv_init_irq = init_se7724_IRQ,
- .mv_mem_reserve = ms7724se_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
deleted file mode 100644
index 2406d3e353524b..00000000000000
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7751 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
deleted file mode 100644
index dcefe58d87534b..00000000000000
--- a/arch/sh/boards/mach-se/7751/irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <mach-se/mach/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
- { 13, 3, 3, 2 },
- /* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-se7751",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
deleted file mode 100644
index 4c480605557f46..00000000000000
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
- return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-device_initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
- .mv_name = "7751 SolutionEngine",
- .mv_init_irq = init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
deleted file mode 100644
index 1f6669ab1bc0db..00000000000000
--- a/arch/sh/boards/mach-se/7780/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
deleted file mode 100644
index d427dfd711f171..00000000000000
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7780.h>
-
-#define INTC_BASE 0xffd00000
-#define INTC_ICR1 (INTC_BASE+0x1c)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK1);
- /* mask SM501 interrupt */
- __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK2);
-
- /* set FPGA INTSEL register */
- /* FPGA + 0x06 */
- __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
- (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
- /* FPGA + 0x08 */
- __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
- (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
- (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
- (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
- /* FPGA + 0x0A */
- __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-
- /* ICR1: detect low level(for 2ndcut) */
- __raw_writel(0xAAAA0000, INTC_ICR1);
-
- /*
- * FPGA PCISEL register initialize
- *
- * CPU || SLOT1 | SLOT2 | S-ATA | USB
- * -------------------------------------
- * INTA || INTA | INTD | -- | INTB
- * -------------------------------------
- * INTB || INTB | INTA | -- | INTC
- * -------------------------------------
- * INTC || INTC | INTB | INTA | --
- * -------------------------------------
- * INTD || INTD | INTC | -- | INTA
- * -------------------------------------
- */
- __raw_writew(0x0013, FPGA_PCI_INTSEL1);
- __raw_writew(0xE402, FPGA_PCI_INTSEL2);
-}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
deleted file mode 100644
index 309f2681381b08..00000000000000
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SMC_IRQ,
- .end = SMC_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
- return platform_add_devices(se7780_devices,
- ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR 0xFFEA000E
-#define GPIO_PMSELR 0xFFEA0080
-#define GPIO_PECR 0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
- /* "SH-Linux" on LED Display */
- __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
- printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
- /*
- * PCI REQ/GNT setting
- * REQ0/GNT0 -> USB
- * REQ1/GNT1 -> PC Card
- * REQ2/GNT2 -> Serial ATA
- * REQ3/GNT3 -> PCI slot
- */
- __raw_writew(0x0213, FPGA_REQSEL);
-
- /* GPIO setting */
- __raw_writew(0x0000, GPIO_PECR);
- __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- __raw_writew(0x0c00, GPIO_PMSELR);
-
- /* iVDR Power ON */
- __raw_writew(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Solution Engine 7780" ,
- .mv_setup = se7780_setup ,
- .mv_init_irq = init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
deleted file mode 100644
index 8f69fc147c733d..00000000000000
--- a/arch/sh/boards/mach-se/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
-
-obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
-obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
-obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
-obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
-obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
-obj-$(CONFIG_SH_7724_SOLUTION_ENGINE) += 7724/
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
deleted file mode 100644
index 4431da64a56f6a..00000000000000
--- a/arch/sh/boards/mach-se/board-se7619.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/se/7619/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Hitachi SH7619 SolutionEngine Support.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static int se7619_mode_pins(void)
-{
- return MODE_PIN2 | MODE_PIN0;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_mode_pins = se7619_mode_pins,
-};
diff --git a/arch/sh/boards/mach-sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
deleted file mode 100644
index f89c25c6a39c8a..00000000000000
--- a/arch/sh/boards/mach-sh03/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
deleted file mode 100644
index 7fb474844a2d1d..00000000000000
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support
- *
- * Copyright (C) 2004 Saito.K & Jeanne(ksaito@interface.co.jp)
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#define RTC_BASE 0xb0000000
-#define RTC_SEC1 (RTC_BASE + 0)
-#define RTC_SEC10 (RTC_BASE + 1)
-#define RTC_MIN1 (RTC_BASE + 2)
-#define RTC_MIN10 (RTC_BASE + 3)
-#define RTC_HOU1 (RTC_BASE + 4)
-#define RTC_HOU10 (RTC_BASE + 5)
-#define RTC_WEE1 (RTC_BASE + 6)
-#define RTC_DAY1 (RTC_BASE + 7)
-#define RTC_DAY10 (RTC_BASE + 8)
-#define RTC_MON1 (RTC_BASE + 9)
-#define RTC_MON10 (RTC_BASE + 10)
-#define RTC_YEA1 (RTC_BASE + 11)
-#define RTC_YEA10 (RTC_BASE + 12)
-#define RTC_YEA100 (RTC_BASE + 13)
-#define RTC_YEA1000 (RTC_BASE + 14)
-#define RTC_CTL (RTC_BASE + 15)
-#define RTC_BUSY 1
-#define RTC_STOP 2
-
-static DEFINE_SPINLOCK(sh03_rtc_lock);
-
-static int sh03_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&sh03_rtc_lock);
- again:
- do {
- sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
- min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
- day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
- mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
- year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
- + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
- + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
- } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
- if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
- hour > 23 || min > 59 || sec > 59) {
- printk(KERN_ERR
- "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n");
- printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
- year, mon, day, hour, min, sec);
-
- __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
- __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
- __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
- __raw_writeb(6, RTC_WEE1);
- __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
- __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
- __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
- __raw_writeb(0, RTC_YEA100);
- __raw_writeb(2, RTC_YEA1000);
- __raw_writeb(0, RTC_CTL);
- goto again;
- }
-
- spin_unlock(&sh03_rtc_lock);
-
- tm->tm_sec = sec;
- tm->tm_min = min;
- tm->tm_hour = hour;
- tm->tm_mday = day;
- tm->tm_mon = mon;
- tm->tm_year = year - 1900;
-
- return 0;
-}
-
-static int set_rtc_mmss(struct rtc_time *tm)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- int i;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&sh03_rtc_lock);
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
- break;
- cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- real_seconds = tm->tm_sec;
- real_minutes = tm->tm_min;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- __raw_writeb(real_seconds % 10, RTC_SEC1);
- __raw_writeb(real_seconds / 10, RTC_SEC10);
- __raw_writeb(real_minutes % 10, RTC_MIN1);
- __raw_writeb(real_minutes / 10, RTC_MIN10);
- } else {
- printk_once(KERN_NOTICE
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -EINVAL;
- }
- spin_unlock(&sh03_rtc_lock);
-
- return retval;
-}
-
-int sh03_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- return set_rtc_mmss(tm);
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = sh03_rtc_gettimeofday,
- .set_time = sh03_rtc_settimeofday,
-};
-
-static int __init sh03_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(sh03_time_init);
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
deleted file mode 100644
index 3901b6031ad565..00000000000000
--- a/arch/sh/boards/mach-sh03/setup.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004 Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <mach-sh03/mach/io.h>
-#include <mach-sh03/mach/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRL2_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa0800000,
- .end = 0xa0800000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start += (unsigned long)cf_ide_base;
- cf_ide_resources[0].end += (unsigned long)cf_ide_base;
- cf_ide_resources[1].start += (unsigned long)cf_ide_base;
- cf_ide_resources[1].end += (unsigned long)cf_ide_base;
-
- return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-device_initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
- .mv_name = "Interface (CTP/PCI-SH03)",
- .mv_init_irq = init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
deleted file mode 100644
index d6341310444a51..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
deleted file mode 100644
index efd382b7dad403..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
- *
- * Renesas Solutions SH7763RDP Support.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/sh7763rdp.h>
-
-#define INTC_BASE (0xFFD00000)
-#define INTC_INT2PRI7 (INTC_BASE+0x4001C)
-#define INTC_INT2MSKCR (INTC_BASE+0x4003C)
-#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_sh7763rdp_IRQ(void)
-{
- /* GPIO enabled */
- __raw_writel(1 << 25, INTC_INT2MSKCR);
-
- /* enable GPIO interrupts */
- __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
- INTC_INT2PRI7);
-
- /* USBH enabled */
- __raw_writel(1 << 17, INTC_INT2MSKCR1);
-
- /* GETHER enabled */
- __raw_writel(1 << 16, INTC_INT2MSKCR1);
-
- /* DMAC enabled */
- __raw_writel(1 << 8, INTC_INT2MSKCR);
-}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
deleted file mode 100644
index 97e715e4e9b33c..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
- *
- * Renesas Solutions sh7763rdp board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <mach/sh7763rdp.h>
-#include <asm/sh7760fb.h>
-
-/* NOR Flash */
-static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * 128 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * 128 * 1024),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data sh7763rdp_nor_flash_data = {
- .width = 2,
- .parts = sh7763rdp_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
-};
-
-static struct resource sh7763rdp_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = (64 * 1024 * 1024),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device sh7763rdp_nor_flash_device = {
- .name = "physmap-flash",
- .resource = sh7763rdp_nor_flash_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
- .dev = {
- .platform_data = &sh7763rdp_nor_flash_data,
- },
-};
-
-/*
- * SH-Ether
- *
- * SH Ether of SH7763 has multi IRQ handling.
- * (0x920,0x940,0x960 -> 0x920)
- */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh7763rdp_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-/* SH7763 LCDC */
-static struct resource sh7763rdp_fb_resources[] = {
- {
- .start = 0xFFE80000,
- .end = 0xFFE80442 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct fb_videomode sh7763fb_videomode = {
- .refresh = 60,
- .name = "VGA Monitor",
- .xres = 640,
- .yres = 480,
- .pixclock = 10000,
- .left_margin = 80,
- .right_margin = 24,
- .upper_margin = 30,
- .lower_margin = 1,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = FBINFO_FLAG_DEFAULT,
-};
-
-static struct sh7760fb_platdata sh7763fb_def_pdata = {
- .def_mode = &sh7763fb_videomode,
- .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
- .lddfr = LDDFR_16BPP_RGB565,
- .ldpmmr = 0x0000,
- .ldpspr = 0xFFFF,
- .ldaclnr = 0x0001,
- .ldickr = 0x1102,
- .rotate = 0,
- .novsync = 0,
- .blank = NULL,
-};
-
-static struct platform_device sh7763rdp_fb_device = {
- .name = "sh7760-lcdc",
- .resource = sh7763rdp_fb_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
- .dev = {
- .platform_data = &sh7763fb_def_pdata,
- },
-};
-
-static struct platform_device *sh7763rdp_devices[] __initdata = {
- &sh7763rdp_nor_flash_device,
- &sh7763rdp_eth_device,
- &sh7763rdp_fb_device,
-};
-
-static int __init sh7763rdp_devices_setup(void)
-{
- return platform_add_devices(sh7763rdp_devices,
- ARRAY_SIZE(sh7763rdp_devices));
-}
-device_initcall(sh7763rdp_devices_setup);
-
-static void __init sh7763rdp_setup(char **cmdline_p)
-{
- /* Board version check */
- if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
- printk(KERN_INFO "RTE Standard Configuration\n");
- else
- printk(KERN_INFO "RTA Standard Configuration\n");
-
- /* USB pin select bits (clear bit 5-2 to 0) */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
- /* USBH setup port I controls to other (clear bits 4-9 to 0) */
- __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
-
- /* Select USB Host controller */
- __raw_writew(0x00, USB_USBHSC);
-
- /* For LCD */
- /* set PTJ7-1, bits 15-2 of PJCR to 0 */
- __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
- /* set PTI5, bits 11-10 of PICR to 0 */
- __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
- __raw_writew(0, PORT_PKCR);
- __raw_writew(0, PORT_PLCR);
- /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
- /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
-
- /* For HAC */
- /* bit3-0 0100:HAC & SSI1 enable */
- __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
- /* bit14 1:SSI_HAC_CLK enable */
- __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
-
- /* SH-Ether */
- __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
-
- /* MMC */
- /*selects SCIF and MMC other functions */
- __raw_writew(0x0001, PORT_PSEL0);
- /* MMC clock operates */
- __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
- __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
- __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
-}
-
-static struct sh_machine_vector mv_sh7763rdp __initmv = {
- .mv_name = "sh7763drp",
- .mv_setup = sh7763rdp_setup,
- .mv_init_irq = init_sh7763rdp_IRQ,
-};
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
deleted file mode 100644
index 6caefa1145980d..00000000000000
--- a/arch/sh/boards/mach-x3proto/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += setup.o ilsel.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
deleted file mode 100644
index f82d3a6a844a58..00000000000000
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/gpio.c
- *
- * Renesas SH-X3 Prototype Baseboard GPIO Support.
- *
- * Copyright (C) 2010 - 2012 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-
-#define KEYCTLR 0xb81c0000
-#define KEYOUTR 0xb81c0002
-#define KEYDETR 0xb81c0004
-
-static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static struct irq_domain *x3proto_irq_domain;
-
-static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
- unsigned int data;
-
- spin_lock_irqsave(&x3proto_gpio_lock, flags);
- data = __raw_readw(KEYCTLR);
- data |= (1 << gpio);
- __raw_writew(data, KEYCTLR);
- spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
-
- return 0;
-}
-
-static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(__raw_readw(KEYDETR) & (1 << gpio));
-}
-
-static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
- int virq;
-
- if (gpio < chip->ngpio)
- virq = irq_create_mapping(x3proto_irq_domain, gpio);
- else
- virq = -ENXIO;
-
- return virq;
-}
-
-static void x3proto_gpio_irq_handler(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int pin;
-
- chip->irq_mask_ack(data);
-
- mask = __raw_readw(KEYDETR);
- for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
- generic_handle_domain_irq(x3proto_irq_domain, pin);
-
- chip->irq_unmask(data);
-}
-
-struct gpio_chip x3proto_gpio_chip = {
- .label = "x3proto-gpio",
- .direction_input = x3proto_gpio_direction_input,
- .get = x3proto_gpio_get,
- .to_irq = x3proto_gpio_to_irq,
- .base = -1,
- .ngpio = NR_BASEBOARD_GPIOS,
-};
-
-static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
- "gpio");
-
- return 0;
-}
-
-static struct irq_domain_ops x3proto_gpio_irq_ops = {
- .map = x3proto_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-int __init x3proto_gpio_setup(void)
-{
- int ilsel, ret;
-
- ilsel = ilsel_enable(ILSEL_KEY);
- if (unlikely(ilsel < 0))
- return ilsel;
-
- ret = gpiochip_add_data(&x3proto_gpio_chip, NULL);
- if (unlikely(ret))
- goto err_gpio;
-
- x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
- &x3proto_gpio_irq_ops, NULL);
- if (unlikely(!x3proto_irq_domain))
- goto err_irq;
-
- pr_info("registering '%s' support, handling GPIOs %u -> %u, "
- "bound to IRQ %u\n",
- x3proto_gpio_chip.label, x3proto_gpio_chip.base,
- x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
- ilsel);
-
- irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
- irq_set_irq_wake(ilsel, 1);
-
- return 0;
-
-err_irq:
- gpiochip_remove(&x3proto_gpio_chip);
- ret = 0;
-err_gpio:
- synchronize_irq(ilsel);
-
- ilsel_disable(ILSEL_KEY);
-
- return ret;
-}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
deleted file mode 100644
index f0d5eb41521a49..00000000000000
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/ilsel.c
- *
- * Helper routines for SH-X3 proto board ILSEL.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-
-/*
- * ILSEL is split across:
- *
- * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ]
- * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ]
- * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ]
- * ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
- *
- * With each level being relative to an ilsel_source_t.
- */
-#define ILSEL_BASE 0xb8100004
-#define ILSEL_LEVELS 15
-
-/*
- * ILSEL level map, in descending order from the highest level down.
- *
- * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
- * directly to IRLs. As the IRQs are numbered in reverse order relative
- * to the interrupt level, the level map is carefully managed to ensure a
- * 1:1 mapping between the bit position and the IRQ number.
- *
- * This careful constructions allows ilsel_enable*() to be referenced
- * directly for hooking up an ILSEL set and getting back an IRQ which can
- * subsequently be used for internal accounting in the (optional) disable
- * path.
- */
-static unsigned long ilsel_level_map;
-
-static inline unsigned int ilsel_offset(unsigned int bit)
-{
- return ILSEL_LEVELS - bit - 1;
-}
-
-static inline unsigned long mk_ilsel_addr(unsigned int bit)
-{
- return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
-}
-
-static inline unsigned int mk_ilsel_shift(unsigned int bit)
-{
- return (ilsel_offset(bit) & 0x3) << 2;
-}
-
-static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
-{
- unsigned int tmp, shift;
- unsigned long addr;
-
- pr_notice("enabling ILSEL set %d\n", set);
-
- addr = mk_ilsel_addr(bit);
- shift = mk_ilsel_shift(bit);
-
- pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
- __func__, bit, addr, shift, set);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << shift);
- tmp |= set << shift;
- __raw_writew(tmp, addr);
-}
-
-/**
- * ilsel_enable - Enable an ILSEL set.
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- *
- * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
- * available interrupt level. Callers should take care to order callsites
- * noting descending interrupt levels. Aliasing FPGA and external board
- * IRQs need to use ilsel_enable_fixed().
- *
- * The return value is an IRQ number that can later be taken down with
- * ilsel_disable().
- */
-int ilsel_enable(ilsel_source_t set)
-{
- unsigned int bit;
-
- if (unlikely(set > ILSEL_KEY)) {
- pr_err("Aliased sources must use ilsel_enable_fixed()\n");
- return -EINVAL;
- }
-
- do {
- bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
- } while (test_and_set_bit(bit, &ilsel_level_map));
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable);
-
-/**
- * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- * @level: Interrupt level (1 - 15)
- *
- * Enables a given ILSEL source at a fixed interrupt level. Necessary
- * both for level reservation as well as for aliased sources that only
- * exist on special ILSEL#s.
- *
- * Returns an IRQ number (as ilsel_enable()).
- */
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
-{
- unsigned int bit = ilsel_offset(level - 1);
-
- if (test_and_set_bit(bit, &ilsel_level_map))
- return -EBUSY;
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
-
-/**
- * ilsel_disable - Disable an ILSEL set
- * @irq: Bit position for ILSEL set value (retval from enable routines)
- *
- * Disable a previously enabled ILSEL set.
- */
-void ilsel_disable(unsigned int irq)
-{
- unsigned long addr;
- unsigned int tmp;
-
- pr_notice("disabling ILSEL set %d\n", irq);
-
- addr = mk_ilsel_addr(irq);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << mk_ilsel_shift(irq));
- __raw_writew(tmp, addr);
-
- clear_bit(irq, &ilsel_level_map);
-}
-EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
deleted file mode 100644
index 95b85f2e13dda7..00000000000000
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/setup.c
- *
- * Renesas SH-X3 Prototype Board Support.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xb8140020,
- .end = 0xb8140020,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x18000300,
- .end = 0x18000300 + 0x10 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .resource = smc91x_resources,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0x18040000,
- .end = 0x18080000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0x18080000,
- .end = 0x180c0000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
- {
- .desc = "key44",
- .code = KEY_POWER,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key43",
- .code = KEY_SUSPEND,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key42",
- .code = KEY_KATAKANAHIRAGANA,
- .active_low = 1,
- }, {
- .desc = "key41",
- .code = KEY_SWITCHVIDEOMODE,
- .active_low = 1,
- }, {
- .desc = "key34",
- .code = KEY_F12,
- .active_low = 1,
- }, {
- .desc = "key33",
- .code = KEY_F11,
- .active_low = 1,
- }, {
- .desc = "key32",
- .code = KEY_F10,
- .active_low = 1,
- }, {
- .desc = "key31",
- .code = KEY_F9,
- .active_low = 1,
- }, {
- .desc = "key24",
- .code = KEY_F8,
- .active_low = 1,
- }, {
- .desc = "key23",
- .code = KEY_F7,
- .active_low = 1,
- }, {
- .desc = "key22",
- .code = KEY_F6,
- .active_low = 1,
- }, {
- .desc = "key21",
- .code = KEY_F5,
- .active_low = 1,
- }, {
- .desc = "key14",
- .code = KEY_F4,
- .active_low = 1,
- }, {
- .desc = "key13",
- .code = KEY_F3,
- .active_low = 1,
- }, {
- .desc = "key12",
- .code = KEY_F2,
- .active_low = 1,
- }, {
- .desc = "key11",
- .code = KEY_F1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data baseboard_buttons_data = {
- .buttons = baseboard_buttons,
- .nbuttons = ARRAY_SIZE(baseboard_buttons),
-};
-
-static struct platform_device baseboard_buttons_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &baseboard_buttons_data,
- },
-};
-
-static struct platform_device *x3proto_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_device,
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &baseboard_buttons_device,
-};
-
-static void __init x3proto_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- /* Set ICR0.LVLMODE */
- __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
-static int __init x3proto_devices_setup(void)
-{
- int ret, i;
-
- /*
- * IRLs are only needed for ILSEL mappings, so flip over the INTC
- * pins at a later point to enable the GPIOs to settle.
- */
- x3proto_init_irq();
-
- /*
- * Now that ILSELs are available, set up the baseboard GPIOs.
- */
- ret = x3proto_gpio_setup();
- if (unlikely(ret))
- return ret;
-
- /*
- * Propagate dynamic GPIOs for the baseboard button device.
- */
- for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
- baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
-
- r8a66597_usb_host_resources[1].start =
- r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
-
- m66592_usb_peripheral_resources[1].start =
- m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
-
- smc91x_resources[1].start =
- smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
-
- return platform_add_devices(x3proto_devices,
- ARRAY_SIZE(x3proto_devices));
-}
-device_initcall(x3proto_devices_setup);
-
-static void __init x3proto_setup(char **cmdline_p)
-{
- register_smp_ops(&shx3_smp_ops);
-}
-
-static struct sh_machine_vector mv_x3proto __initmv = {
- .mv_name = "x3proto",
- .mv_setup = x3proto_setup,
-};
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
deleted file mode 100644
index f7f3e618e85b6a..00000000000000
--- a/arch/sh/boards/of-generic.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH generic board support, using device tree
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/of_fdt.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-
-#ifdef CONFIG_SMP
-
-static void dummy_smp_setup(void)
-{
-}
-
-static void dummy_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
-}
-
-static unsigned int dummy_smp_processor_id(void)
-{
- return 0;
-}
-
-static void dummy_send_ipi(unsigned int cpu, unsigned int message)
-{
-}
-
-static struct plat_smp_ops dummy_smp_ops = {
- .smp_setup = dummy_smp_setup,
- .prepare_cpus = dummy_prepare_cpus,
- .start_cpu = dummy_start_cpu,
- .smp_processor_id = dummy_smp_processor_id,
- .send_ipi = dummy_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-extern const struct of_cpu_method __cpu_method_of_table[];
-const struct of_cpu_method __cpu_method_of_table_sentinel
- __section("__cpu_method_of_table_end");
-
-static void sh_of_smp_probe(void)
-{
- struct device_node *np;
- const char *method = NULL;
- const struct of_cpu_method *m = __cpu_method_of_table;
-
- pr_info("SH generic board support: scanning for cpus\n");
-
- init_cpu_possible(cpumask_of(0));
-
- for_each_of_cpu_node(np) {
- u64 id = of_get_cpu_hwid(np, 0);
-
- if (id < NR_CPUS) {
- if (!method)
- of_property_read_string(np, "enable-method", &method);
- set_cpu_possible(id, true);
- set_cpu_present(id, true);
- __cpu_number_map[id] = id;
- __cpu_logical_map[id] = id;
- }
- }
- if (!method) {
- np = of_find_node_by_name(NULL, "cpus");
- of_property_read_string(np, "enable-method", &method);
- of_node_put(np);
- }
-
- pr_info("CPU enable method: %s\n", method);
- if (method)
- for (; m->method; m++)
- if (!strcmp(m->method, method)) {
- register_smp_ops(m->ops);
- return;
- }
-
- register_smp_ops(&dummy_smp_ops);
-}
-
-#else
-
-static void sh_of_smp_probe(void)
-{
-}
-
-#endif
-
-static void noop(void)
-{
-}
-
-static int noopi(void)
-{
- return 0;
-}
-
-static void __init sh_of_mem_reserve(void)
-{
- early_init_fdt_reserve_self();
- early_init_fdt_scan_reserved_mem();
-}
-
-static void __init sh_of_setup(char **cmdline_p)
-{
- struct device_node *root;
-
- sh_mv.mv_name = "Unknown SH model";
- root = of_find_node_by_path("/");
- if (root) {
- of_property_read_string(root, "model", &sh_mv.mv_name);
- of_node_put(root);
- }
-
- sh_of_smp_probe();
-}
-
-static int sh_of_irq_demux(int irq)
-{
- /* FIXME: eventually this should not be used at all;
- * the interrupt controller should set_handle_irq(). */
- return irq;
-}
-
-static void __init sh_of_init_irq(void)
-{
- pr_info("SH generic board support: scanning for interrupt controllers\n");
- irqchip_init();
-}
-
-static int __init sh_of_clk_init(void)
-{
-#ifdef CONFIG_COMMON_CLK
- /* Disabled pending move to COMMON_CLK framework. */
- pr_info("SH generic board support: scanning for clk providers\n");
- of_clk_init(NULL);
-#endif
- return 0;
-}
-
-static struct sh_machine_vector __initmv sh_of_generic_mv = {
- .mv_setup = sh_of_setup,
- .mv_name = "devicetree", /* replaced by DT root's model */
- .mv_irq_demux = sh_of_irq_demux,
- .mv_init_irq = sh_of_init_irq,
- .mv_clk_init = sh_of_clk_init,
- .mv_mode_pins = noopi,
- .mv_mem_init = noop,
- .mv_mem_reserve = sh_of_mem_reserve,
-};
-
-struct sh_clk_ops;
-
-void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
-}
-
-void __init __weak plat_irq_setup(void)
-{
-}
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
deleted file mode 100644
index 6603bbbc917d64..00000000000000
--- a/arch/sh/boot/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-zImage
-vmlinux*
-uImage*
-!vmlinux.scr
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
deleted file mode 100644
index 1f5d2df3c7e060..00000000000000
--- a/arch/sh/boot/Makefile
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# arch/sh/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1999 Stuart Menefy
-#
-
-#
-# Assign safe dummy values if these variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_PAGE_OFFSET ?= 0x80000000
-CONFIG_MEMORY_START ?= 0x0c000000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
-CONFIG_ENTRY_OFFSET ?= 0x00001000
-CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
-
-suffix_y := bin
-suffix_$(CONFIG_KERNEL_GZIP) := gz
-suffix_$(CONFIG_KERNEL_BZIP2) := bz2
-suffix_$(CONFIG_KERNEL_LZMA) := lzma
-suffix_$(CONFIG_KERNEL_XZ) := xz
-suffix_$(CONFIG_KERNEL_LZO) := lzo
-
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
- uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin \
- vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
- vmlinux.bin.xz vmlinux.bin.lzo
-subdir- := compressed romimage
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
- $(Q)$(MAKE) $(build)=$(obj)/romimage $@
-
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
-
-KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET)]')
-
-KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
-
-UIMAGE_LOADADDR = $(KERNEL_LOAD)
-UIMAGE_ENTRYADDR = $(KERNEL_ENTRY)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern)
-
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo)
-
-$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 FORCE
- $(call if_changed,uimage,bzip2)
-
-$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,uimage,gzip)
-
-$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
- $(call if_changed,uimage,lzma)
-
-$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz FORCE
- $(call if_changed,uimage,xz)
-
-$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
- $(call if_changed,uimage,lzo)
-
-$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
- $(call if_changed,uimage,none)
-
-OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
-$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
-
-OBJCOPYFLAGS_uImage.srec := -I binary -O srec
-$(obj)/uImage.srec: $(obj)/uImage FORCE
- $(call if_changed,objcopy)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix_y)
- @ln -sf $(notdir $<) $@
- @echo ' Image $@ is ready'
-
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
- KERNEL_MEMORY suffix_y
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
deleted file mode 100644
index cd16663bc7c84c..00000000000000
--- a/arch/sh/boot/compressed/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
deleted file mode 100644
index 591125c42d49df..00000000000000
--- a/arch/sh/boot/compressed/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-OBJECTS := head_32.o misc.o cache.o piggy.o \
- ashiftrt.o ashldi3.o ashrsi3.o ashlsi3.o lshrsi3.o
-
-# These were previously generated files. When you are building the kernel
-# with O=, make sure to remove the stale files in the output tree. Otherwise,
-# the build system wrongly compiles the stale ones.
-ifdef building_out_of_srctree
-$(shell rm -f $(addprefix $(obj)/, ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S))
-endif
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
- vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
-
-GCOV_PROFILE := n
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-#
-ifeq ($(CONFIG_32BIT),y)
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-else
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-endif
-
-ccflags-remove-$(CONFIG_MCOUNT) += -pg
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
- -T $(obj)/../../kernel/vmlinux.lds
-
-KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-
-$(obj)/vmlinux: $(addprefix $(obj)/, $(OBJECTS)) FORCE
- $(call if_changed,ld)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2_with_size)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma_with_size)
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern_with_size)
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo_with_size)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/compressed/ashiftrt.S b/arch/sh/boot/compressed/ashiftrt.S
deleted file mode 100644
index 0f3b291a3f4bca..00000000000000
--- a/arch/sh/boot/compressed/ashiftrt.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashiftrt.S"
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
deleted file mode 100644
index 7cebd646df839b..00000000000000
--- a/arch/sh/boot/compressed/ashldi3.c
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../lib/ashldi3.c"
diff --git a/arch/sh/boot/compressed/ashlsi3.S b/arch/sh/boot/compressed/ashlsi3.S
deleted file mode 100644
index e354262b275f4d..00000000000000
--- a/arch/sh/boot/compressed/ashlsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashlsi3.S"
diff --git a/arch/sh/boot/compressed/ashrsi3.S b/arch/sh/boot/compressed/ashrsi3.S
deleted file mode 100644
index e564be9a4dcd89..00000000000000
--- a/arch/sh/boot/compressed/ashrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashrsi3.S"
diff --git a/arch/sh/boot/compressed/cache.c b/arch/sh/boot/compressed/cache.c
deleted file mode 100644
index 31e04ff4841ed0..00000000000000
--- a/arch/sh/boot/compressed/cache.c
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-int cache_control(unsigned int command)
-{
- volatile unsigned int *p = (volatile unsigned int *) 0x80000000;
- int i;
-
- for (i = 0; i < (32 * 1024); i += 32) {
- (void)*p;
- p += (32 / sizeof(int));
- }
-
- return 0;
-}
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
deleted file mode 100644
index 7bb168133dbbf8..00000000000000
--- a/arch/sh/boot/compressed/head_32.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/compressed/head.S
- *
- * Copyright (C) 1999 Stuart Menefy
- * Copyright (C) 2003 SUGIOKA Toshinobu
- */
-
-.text
-
-#include <asm/page.h>
-
- .global startup
-startup:
- /* Load initial status register */
- mov.l init_sr, r1
- ldc r1, sr
-
- /* Move myself to proper location if necessary */
- mova 1f, r0
- mov.l 1f, r2
- cmp/eq r2, r0
- bt clear_bss
- sub r0, r2
- mov.l bss_start_addr, r0
- mov #0xffffffe0, r1
- and r1, r0 ! align cache line
- mov.l text_start_addr, r3
- mov r0, r1
- sub r2, r1
-3:
- mov.l @r1, r4
- mov.l @(4,r1), r5
- mov.l @(8,r1), r6
- mov.l @(12,r1), r7
- mov.l @(16,r1), r8
- mov.l @(20,r1), r9
- mov.l @(24,r1), r10
- mov.l @(28,r1), r11
- mov.l r4, @r0
- mov.l r5, @(4,r0)
- mov.l r6, @(8,r0)
- mov.l r7, @(12,r0)
- mov.l r8, @(16,r0)
- mov.l r9, @(20,r0)
- mov.l r10, @(24,r0)
- mov.l r11, @(28,r0)
-#ifdef CONFIG_CPU_SH4
- ocbwb @r0
-#endif
- cmp/hi r3, r0
- add #-32, r0
- bt/s 3b
- add #-32, r1
- mov.l 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 1b
-2: .long clear_bss
-text_start_addr:
- .long startup
-
- /* Clear BSS */
-clear_bss:
- mov.l end_addr, r1
- mov.l bss_start_addr, r2
- mov #0, r0
-l1:
- mov.l r0, @-r1
- cmp/eq r1,r2
- bf l1
-
- /* Set the initial pointer. */
- mov.l init_stack_addr, r0
- mov.l @r0, r15
-
- /* Decompress the kernel */
- mov.l decompress_kernel_addr, r0
- jsr @r0
- nop
-
- /* Jump to the start of the decompressed kernel */
- mov.l kernel_start_addr, r0
- jmp @r0
- nop
-
- .align 2
-bss_start_addr:
- .long __bss_start
-end_addr:
- .long _end
-init_sr:
- .long 0x500000F0 /* Privileged mode, Bank=0, Block=1, IMASK=0xF */
-kexec_magic:
- .long 0x400000F0 /* magic used by kexec to parse zImage format */
-init_stack_addr:
- .long stack_start
-decompress_kernel_addr:
- .long decompress_kernel
-kernel_start_addr:
-#ifdef CONFIG_32BIT
- .long ___pa(_text+PAGE_SIZE)
-#else
- .long _text+PAGE_SIZE
-#endif
-
- .align 9
-fake_headers_as_bzImage:
- .word 0
- .ascii "HdrS" ! header signature
- .word 0x0202 ! header version number (>= 0x0105)
- ! or else old loadlin-1.5 will fail)
- .word 0 ! default_switch
- .word 0 ! SETUPSEG
- .word 0x1000
- .word 0 ! pointing to kernel version string
- .byte 0 ! = 0, old one (LILO, Loadlin,
- ! 0xTV: T=0 for LILO
- ! V = version
- .byte 1 ! Load flags bzImage=1
- .word 0x8000 ! size to move, when setup is not
- .long 0x100000 ! 0x100000 = default for big kernel
- .long 0 ! address of loaded ramdisk image
- .long 0 # its size in bytes
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
deleted file mode 100644
index 9993113c671386..00000000000000
--- a/arch/sh/boot/compressed/head_64.S
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/shmedia/boot/compressed/head.S
- *
- * Copied from
- * arch/shmedia/kernel/head.S
- * which carried the copyright:
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * Modification for compressed loader:
- * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
- */
-#include <asm/cache.h>
-#include <asm/tlb.h>
-#include <cpu/mmu_context.h>
-#include <cpu/registers.h>
-
-/*
- * Fixed TLB entries to identity map the beginning of RAM
- */
-#define MMUIR_TEXT_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUIR_TEXT_L 0x000000000000009a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */
-
-#define MMUDR_CACHED_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUDR_CACHED_L 0x000000000000015a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */
-
-#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
-#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
-
-#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
-#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
-
- .text
-
- .global startup
-startup:
- /*
- * Prevent speculative fetch on device memory due to
- * uninitialized target registers.
- * This must be executed before the first branch.
- */
- ptabs/u r63, tr0
- ptabs/u r63, tr1
- ptabs/u r63, tr2
- ptabs/u r63, tr3
- ptabs/u r63, tr4
- ptabs/u r63, tr5
- ptabs/u r63, tr6
- ptabs/u r63, tr7
- synci
-
- /*
- * Set initial TLB entries for cached and uncached regions.
- * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
- */
- /* Clear ITLBs */
- pta 1f, tr1
- movi ITLB_FIXED, r21
- movi ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUIR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Clear DTLBs */
- pta 1f, tr1
- movi DTLB_FIXED, r21
- movi DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUDR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Map one big (512Mb) page for ITLB */
- movi ITLB_FIXED, r21
- movi MMUIR_TEXT_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
- movi MMUIR_TEXT_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
-
- /* Map one big CACHED (512Mb) page for DTLB */
- movi DTLB_FIXED, r21
- movi MMUDR_CACHED_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
- movi MMUDR_CACHED_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
-
- /* ICache */
- movi ICCR_BASE, r21
- movi ICCR0_INIT_VAL, r22
- movi ICCR1_INIT_VAL, r23
- putcfg r21, ICCR_REG0, r22
- putcfg r21, ICCR_REG1, r23
- synci
-
- /* OCache */
- movi OCCR_BASE, r21
- movi OCCR0_INIT_VAL, r22
- movi OCCR1_INIT_VAL, r23
- putcfg r21, OCCR_REG0, r22
- putcfg r21, OCCR_REG1, r23
- synco
-
- /*
- * Enable the MMU.
- * From here-on code can be non-PIC.
- */
- movi SR_HARMLESS | SR_ENABLE_MMU, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Set initial stack pointer */
- movi datalabel stack_start, r0
- ld.l r0, 0, r15
-
- /*
- * Clear bss
- */
- pt 1f, tr1
- movi datalabel __bss_start, r22
- movi datalabel _end, r23
-1: st.l r22, 0, r63
- addi r22, 4, r22
- bne r22, r23, tr1
-
- /*
- * Decompress the kernel.
- */
- pt decompress_kernel, tr0
- blink tr0, r18
-
- /*
- * Disable the MMU.
- */
- movi SR_HARMLESS, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Jump into the decompressed kernel */
- movi datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19
- ptabs r19, tr0
- blink tr0, r18
-
- /* Shouldn't return here, but just in case, loop forever */
- pt 1f, tr0
-1: blink tr0, r63
diff --git a/arch/sh/boot/compressed/lshrsi3.S b/arch/sh/boot/compressed/lshrsi3.S
deleted file mode 100644
index 5a8281b7e5161b..00000000000000
--- a/arch/sh/boot/compressed/lshrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/lshrsi3.S"
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
deleted file mode 100644
index ca05c99a3d5b48..00000000000000
--- a/arch/sh/boot/compressed/misc.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SH by Stuart Menefy, Aug 1999
- *
- * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
- */
-
-#include <linux/uaccess.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * gzip declarations
- */
-
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-/* cache.c */
-#define CACHE_ENABLE 0
-#define CACHE_DISABLE 1
-int cache_control(unsigned int command);
-
-extern char input_data[];
-extern int input_len;
-static unsigned char *output;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _text; /* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE 0x400000
-#else
-#define HEAP_SIZE 0x10000
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-#ifdef CONFIG_KERNEL_XZ
-#include "../../../../lib/decompress_unxz.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-int puts(const char *s)
-{
- /* This should be updated to use the sh-sci routines */
- return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
- error("stack-protector: Kernel stack is corrupted\n");
-}
-
-/* Needed because vmlinux.lds.h references this */
-void ftrace_stub(void)
-{
-}
-void arch_ftrace_ops_list_func(void)
-{
-}
-
-#define stackalign 4
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
- unsigned long output_addr;
-
- output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
-#if defined(CONFIG_29BIT)
- output_addr |= P2SEG;
-#endif
-
- output = (unsigned char *)output_addr;
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
- puts("Uncompressing Linux... ");
- cache_control(CACHE_ENABLE);
- __decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
- cache_control(CACHE_DISABLE);
- puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index dd292b4b9082b5..00000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
- .rodata..compressed : ALIGN(8) {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
deleted file mode 100644
index 4a6dec9714a9e2..00000000000000
--- a/arch/sh/boot/dts/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USE_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE))
diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
deleted file mode 100644
index fa9562f78d532c..00000000000000
--- a/arch/sh/boot/dts/j2_mimas_v2.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-/ {
- compatible = "jcore,j2-soc";
- model = "J2 FPGA SoC on Mimas v2 board";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&aic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "jcore,j2";
- reg = <0>;
- clock-frequency = <50000000>;
- d-cache-size = <8192>;
- i-cache-size = <8192>;
- d-cache-block-size = <16>;
- i-cache-block-size = <16>;
- };
- };
-
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x4000000>;
- };
-
- aliases {
- serial0 = &uart0;
- spi0 = &spi0;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-
- soc@abcd0000 {
- compatible = "simple-bus";
- ranges = <0 0xabcd0000 0x100000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- aic: interrupt-controller@200 {
- compatible = "jcore,aic1";
- reg = <0x200 0x10>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- cache-controller@c0 {
- compatible = "jcore,cache";
- reg = <0xc0 4>;
- };
-
- timer@200 {
- compatible = "jcore,pit";
- reg = <0x200 0x30>;
- interrupts = <0x48>;
- };
-
- spi0: spi@40 {
- compatible = "jcore,spi2";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- spi-max-frequency = <25000000>;
-
- reg = <0x40 0x8>;
-
- sdcard@0 {
- compatible = "mmc-spi-slot";
- reg = <0>;
- spi-max-frequency = <25000000>;
- voltage-ranges = <3200 3400>;
- mode = <0>;
- };
- };
-
- uart0: serial@100 {
- clock-frequency = <125000000>;
- compatible = "xlnx,xps-uartlite-1.00.a";
- current-speed = <19200>;
- xlnx,use-parity = <0>;
- xlnx,data-bits = <8>;
- device_type = "serial";
- interrupts = <0x12>;
- port-number = <0>;
- reg = <0x100 0x10>;
- };
- };
-};
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
deleted file mode 100644
index c7c8be58400cd9..00000000000000
--- a/arch/sh/boot/romimage/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/romimage/Makefile
-#
-# create an romImage file suitable for burning to flash/mmc from zImage
-#
-
-targets := vmlinux head.o zeropage.bin piggy.o
-load-y := 0
-
-mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM
-mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o
-load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y)
-obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y)
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
- -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
-
-OBJCOPYFLAGS += -j .empty_zero_page
-
-$(obj)/zeropage.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
deleted file mode 100644
index 81a0652a3dff4b..00000000000000
--- a/arch/sh/boot/romimage/head.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/romimage/head.S
- *
- * Board specific setup code, executed before zImage loader
- */
-
-.text
- #include <asm/page.h>
-
- .global romstart
-romstart:
- /* include board specific setup code */
-#include <mach/romimage.h>
-
-#ifdef CONFIG_ROMIMAGE_MMCIF
- /* load the romImage to above the empty zero page */
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l bytes_to_load, r5
- mov.l loader_function, r7
- jsr @r7
- mov r4, r15
-
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l loaded_code_offs, r5
- add r5, r4
- jmp @r4
- nop
-
- .balign 4
-empty_zero_page_dst_adj:
- .long PAGE_SIZE
-bytes_to_load:
- .long end_data - romstart
-loader_function:
- .long mmcif_loader
-loaded_code_offs:
- .long loaded_code - romstart
-loaded_code:
-#endif /* CONFIG_ROMIMAGE_MMCIF */
-
- /* copy the empty_zero_page contents to where vmlinux expects it */
- mova extra_data_pos, r0
- mov.l extra_data_size, r1
- add r1, r0
- mov.l empty_zero_page_dst, r1
- mov #(PAGE_SHIFT - 4), r4
- mov #1, r3
- shld r4, r3 /* r3 = PAGE_SIZE / 16 */
-
-1:
- mov.l @r0, r4
- mov.l @(4, r0), r5
- mov.l @(8, r0), r6
- mov.l @(12, r0), r7
- add #16,r0
- mov.l r4, @r1
- mov.l r5, @(4, r1)
- mov.l r6, @(8, r1)
- mov.l r7, @(12, r1)
- dt r3
- add #16,r1
- bf 1b
-
- /* jump to the zImage entry point located after the zero page data */
- mov #PAGE_SHIFT, r4
- mov #1, r1
- shld r4, r1
- mova extra_data_pos, r0
- add r1, r0
- mov.l extra_data_size, r1
- add r1, r0
- jmp @r0
- nop
-
- .align 2
-empty_zero_page_dst:
- .long _text
-extra_data_pos:
-extra_data_size:
- .long zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
deleted file mode 100644
index d30123d859e054..00000000000000
--- a/arch/sh/boot/romimage/mmcif-sh7724.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * sh7724 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_data/sh_mmcif.h>
-#include <mach/romimage.h>
-
-#define MMCIF_BASE (void __iomem *)0xa4ca0000
-
-#define MSTPCR2 0xa4150038
-#define PTWCR 0xa4050146
-#define PTXCR 0xa4050148
-#define PSELA 0xa405014e
-#define PSELE 0xa4050156
-#define HIZCRC 0xa405015c
-#define DRVCRA 0xa405018a
-
-enum {
- MMCIF_PROGRESS_ENTER,
- MMCIF_PROGRESS_INIT,
- MMCIF_PROGRESS_LOAD,
- MMCIF_PROGRESS_DONE
-};
-
-/* SH7724 specific MMCIF loader
- *
- * loads the romImage from an MMC card starting from block 512
- * use the following line to write the romImage to an MMC card
- * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
- */
-asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
-{
- mmcif_update_progress(MMCIF_PROGRESS_ENTER);
-
- /* enable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
-
- /* setup pins D7-D0 */
- __raw_writew(0x0000, PTWCR);
-
- /* setup pins MMC_CLK, MMC_CMD */
- __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
-
- /* select D3-D0 pin function */
- __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
-
- /* select D7-D4 pin function */
- __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
-
- /* disable Hi-Z for the MMC pins */
- __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
-
- /* high drive capability for MMC pins */
- __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
-
- mmcif_update_progress(MMCIF_PROGRESS_INIT);
-
- /* setup MMCIF hardware */
- sh_mmcif_boot_init(MMCIF_BASE);
-
- mmcif_update_progress(MMCIF_PROGRESS_LOAD);
-
- /* load kernel via MMCIF interface */
- sh_mmcif_boot_do_read(MMCIF_BASE, 512,
- (no_bytes + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS,
- buf);
-
- /* disable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
-
- mmcif_update_progress(MMCIF_PROGRESS_DONE);
-}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
deleted file mode 100644
index 590394e2f5f2e4..00000000000000
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ /dev/null
@@ -1,8 +0,0 @@
-SECTIONS
-{
- .text : {
- zero_page_pos = .;
- *(.data)
- end_data = .;
- }
-}
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
deleted file mode 100644
index efde2edb562780..00000000000000
--- a/arch/sh/cchips/Kconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Companion Chips"
-
-config HD6446X_SERIES
- bool
-
-choice
- prompt "HD6446x options"
- depends on HD6446X_SERIES
- default HD64461
-
-config HD64461
- bool "Hitachi HD64461 companion chip support"
- help
- The Hitachi HD64461 provides an interface for
- the SH7709 CPU, supporting a LCD controller,
- CRT color controller, IrDA up to 4 Mbps, and a
- PCMCIA controller supporting 2 slots.
-
- More information is available at
- <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
-
- Say Y if you want support for the HD64461.
- Otherwise, say N.
-
-endchoice
-
-# These will also be split into the Kconfig's below
-config HD64461_IRQ
- int "HD64461 IRQ"
- depends on HD64461
- default "36"
- help
- The default setting of the HD64461 IRQ is 36.
-
- Do not change this unless you know what you are doing.
-
-config HD64461_ENABLER
- bool "HD64461 PCMCIA enabler"
- depends on HD64461
- help
- Say Y here if you want to enable PCMCIA support
- via the HD64461 companion chip.
- Otherwise, say N.
-
-endmenu
diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile
deleted file mode 100644
index 6673e0abef2ed8..00000000000000
--- a/arch/sh/cchips/hd6446x/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HD64461) += hd64461.o
-
-ccflags-y := -Werror
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
deleted file mode 100644
index f3fba967445aca..00000000000000
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2000 YAEGASHI Takeshi
- * Hitachi HD64461 companion chip support
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hd64461.h>
-
-/* This belongs in cpu specific */
-#define INTC_ICR1 0xA4140010UL
-
-static void hd64461_mask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr |= mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_unmask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr &= ~mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_mask_and_ack_irq(struct irq_data *data)
-{
- hd64461_mask_irq(data);
-
-#ifdef CONFIG_HD64461_ENABLER
- if (data->irq == HD64461_IRQBASE + 13)
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-}
-
-static struct irq_chip hd64461_irq_chip = {
- .name = "HD64461-IRQ",
- .irq_mask = hd64461_mask_irq,
- .irq_mask_ack = hd64461_mask_and_ack_irq,
- .irq_unmask = hd64461_unmask_irq,
-};
-
-static void hd64461_irq_demux(struct irq_desc *desc)
-{
- unsigned short intv = __raw_readw(HD64461_NIRR);
- unsigned int ext_irq = HD64461_IRQBASE;
-
- intv &= (1 << HD64461_IRQ_NUM) - 1;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-int __init setup_hd64461(void)
-{
- int irq_base, i;
-
- printk(KERN_INFO
- "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
- HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
- HD64461_IRQBASE + 15);
-
-/* Should be at processor specific part.. */
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
- __raw_writew(0x2240, INTC_ICR1);
-#endif
- __raw_writew(0xffff, HD64461_NIMR);
-
- irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for HD64461\n", __func__);
- return irq_base;
- }
-
- for (i = 0; i < 16; i++)
- irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
- irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-#ifdef CONFIG_HD64461_ENABLER
- printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
- __raw_writeb(0x4c, HD64461_PCC1CSCIER);
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-module_init(setup_hd64461);
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
deleted file mode 100644
index 4d83576b89c665..00000000000000
--- a/arch/sh/configs/ap325rxa_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7723=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_AP325RXA=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SH_FLCTL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/apsh4a3a_defconfig b/arch/sh/configs/apsh4a3a_defconfig
deleted file mode 100644
index 99931a13a74da9..00000000000000
--- a/arch/sh/configs/apsh4a3a_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4A3A=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
deleted file mode 100644
index d9fb124bf015a2..00000000000000
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4AD0A=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
deleted file mode 100644
index 6a82c7b8ff32b8..00000000000000
--- a/arch/sh/configs/dreamcast_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7091=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_DREAMCAST=y
-CONFIG_SH_PCLK_FREQ=49876504
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_NR_DMA_CHANNELS=9
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
-CONFIG_MAPLE=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_GDROM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_MAPLE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PVR2=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
deleted file mode 100644
index 5c60e71d839e05..00000000000000
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
deleted file mode 100644
index b52e14ccb450d4..00000000000000
--- a/arch/sh/configs/ecovec24_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2007=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-CONFIG_SND_FSI_DA7210=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_SDHI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
deleted file mode 100644
index 9ee35269bee260..00000000000000
--- a/arch/sh/configs/edosk7705_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PRINTK is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_SH_EDOSK7705=y
-CONFIG_SH_PCLK_FREQ=31250000
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
deleted file mode 100644
index f427a95bcd21e5..00000000000000
--- a/arch/sh/configs/edosk7760_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_LOCALVERSION="_edosk7760"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7760=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_EDOSK7760=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
-CONFIG_DEBUG_DEVRES=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=26000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH7760=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=m
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
deleted file mode 100644
index 2804cb760a7615..00000000000000
--- a/arch/sh/configs/espt_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_ESPT=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
deleted file mode 100644
index 70e6605d7f7ef7..00000000000000
--- a/arch/sh/configs/hp6xx_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0d000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_HP6XX=y
-CONFIG_SH_PCLK_FREQ=22110000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HD64461_ENABLER=y
-CONFIG_PCCARD=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_HP6XX=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_HIT=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_PEARL_8x8=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
deleted file mode 100644
index 2eb81ebe3888bf..00000000000000
--- a/arch/sh/configs/j2_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_SUBTYPE_J2=y
-CONFIG_MEMORY_START=0x10000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_DEVICE_TREE=y
-CONFIG_SH_JCORE_SOC=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttyUL0 earlycon"
-CONFIG_BINFMT_ELF_FDPIC=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-CONFIG_SERIAL_EARLYCON=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_JCORE=y
-CONFIG_WATCHDOG=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_CLKSRC_JCORE_PIT=y
-CONFIG_JCORE_AIC=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_FAT_DEFAULT_UTF8=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_UTF8=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
deleted file mode 100644
index 04436b4fbd7695..00000000000000
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 quiet"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
deleted file mode 100644
index 833404490cfeea..00000000000000
--- a/arch/sh/configs/kfr2r09_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_NO_HZ=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_UBI=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
deleted file mode 100644
index 7037320b654ad6..00000000000000
--- a/arch/sh/configs/landisk_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LANDISK=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_ATALK=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_ATP867X=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_REISERFS_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_SMB_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
deleted file mode 100644
index 05e4ac6fed5f9c..00000000000000
--- a/arch/sh/configs/lboxre2_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LBOX_RE2=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
deleted file mode 100644
index ef1d98e35c91f7..00000000000000
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7720=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_MEMORY_SIZE=0x03F00000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_MAGIC_PANEL_R2=y
-CONFIG_SH_PCLK_FREQ=24000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
deleted file mode 100644
index e9825196dd66af..00000000000000
--- a/arch/sh/configs/microdev_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH4202_MICRODEV=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-CONFIG_SUPERHYWAY=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
deleted file mode 100644
index 4859cd30cfc4c6..00000000000000
--- a/arch/sh/configs/migor_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_SH_MIGOR=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_MIGOR=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
deleted file mode 100644
index f42e4867ddc1a7..00000000000000
--- a/arch/sh/configs/polaris_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_FPU_EMU=y
-CONFIG_SH_POLARIS=y
-CONFIG_SH_PCLK_FREQ=33000000
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_100=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_COMPAT=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_SG=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
deleted file mode 100644
index e527cd60a19105..00000000000000
--- a/arch/sh/configs/r7780mp_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_8129=y
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_E1000=m
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_THERMAL=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
deleted file mode 100644
index a3f952a83d970f..00000000000000
--- a/arch/sh/configs/r7785rp_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_4KSTACKS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
deleted file mode 100644
index 376e95fa77bc68..00000000000000
--- a/arch/sh/configs/rsk7201_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_AIO is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7201=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
deleted file mode 100644
index 1d5fd67a3949b4..00000000000000
--- a/arch/sh/configs/rsk7203_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7203=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=16670800
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_SG=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig
deleted file mode 100644
index f7b9c528c6df87..00000000000000
--- a/arch/sh/configs/rsk7264_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_LOCALVERSION="uClinux RSK2+SH7264"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_COUNTERS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CPU_SUBTYPE_SH7264=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig
deleted file mode 100644
index 4bff14fb185dbb..00000000000000
--- a/arch/sh/configs/rsk7269_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_CPU_SUBTYPE_SH7269=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_SH_PCLK_FREQ=66700000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
deleted file mode 100644
index 96263a4912b726..00000000000000
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_1=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
deleted file mode 100644
index 92e586e6c97432..00000000000000
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
deleted file mode 100644
index 41cb588ca99cb7..00000000000000
--- a/arch/sh/configs/sdk7780_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_LOCALVERSION="_SDK7780"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_RELAY=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SDK7780=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_NET_SCHED=y
-CONFIG_PARPORT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NETCONSOLE=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_DEBUG=y
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
deleted file mode 100644
index 97b7356639ed82..00000000000000
--- a/arch/sh/configs/sdk7786_defconfig
+++ /dev/null
@@ -1,217 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_NUMA=y
-CONFIG_HUGETLB_PAGE_SIZE_64MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SDK7786=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_SH_DMA=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_INTC_BALANCING=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER_INJECT=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_PHRAM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_SH_FLCTL=m
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_DEBUG=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX6900=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=m
-CONFIG_FSCACHE=m
-CONFIG_CACHEFILES=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_UBIFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_LATENCYTOP=y
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_FUNCTION_GRAPH_TRACER is not set
-CONFIG_DMA_API_DEBUG=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
deleted file mode 100644
index 78e0e7be57ee1f..00000000000000
--- a/arch/sh/configs/se7206_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_UID16 is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7206=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7206_SOLUTION_ENGINE=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
deleted file mode 100644
index 5d6c19338ebf29..00000000000000
--- a/arch/sh/configs/se7343_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7343=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_DM9601=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
deleted file mode 100644
index 71a672c307168e..00000000000000
--- a/arch/sh/configs/se7619_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7619_SOLUTION_ENGINE=y
-CONFIG_HZ_100=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
deleted file mode 100644
index ed00a6eeadf55e..00000000000000
--- a/arch/sh/configs/se7705_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_SYSFS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
deleted file mode 100644
index 36356223d51c83..00000000000000
--- a/arch/sh/configs/se7712_defconfig
+++ /dev/null
@@ -1,101 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7712=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
deleted file mode 100644
index 46c5a263a23925..00000000000000
--- a/arch/sh/configs/se7721_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7721=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_7721_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
deleted file mode 100644
index 09e45581744743..00000000000000
--- a/arch/sh/configs/se7722_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
deleted file mode 100644
index d817df7cc4a72a..00000000000000
--- a/arch/sh/configs/se7724_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7724_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_DVB_CORE=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SUPERH is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_SH4_FSI=m
-CONFIG_SND_FSI_AK4642=y
-CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
deleted file mode 100644
index 4defc7628a498a..00000000000000
--- a/arch/sh/configs/se7750_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7750=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
deleted file mode 100644
index 4a024065bb7501..00000000000000
--- a/arch/sh/configs/se7751_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
deleted file mode 100644
index dcd85b858ac8ca..00000000000000
--- a/arch/sh/configs/se7780_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_THERMAL=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/secureedge5410_defconfig b/arch/sh/configs/secureedge5410_defconfig
deleted file mode 100644
index 8422599cfb04dc..00000000000000
--- a/arch/sh/configs/secureedge5410_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SECUREEDGE5410=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1302=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
deleted file mode 100644
index 9fcf68b22dba9a..00000000000000
--- a/arch/sh/configs/sh03_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH03=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig
deleted file mode 100644
index 259c69e3fa2279..00000000000000
--- a/arch/sh/configs/sh2007_defconfig
+++ /dev/null
@@ -1,199 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_VSYSCALL is not set
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH2007=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
-CONFIG_PCCARD=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NET_PKTGEN=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SRP_ATTRS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_EQUALIZER=y
-CONFIG_TUN=y
-CONFIG_VETH=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_SSB=y
-CONFIG_FB=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_DMADEVICES=y
-CONFIG_TIMB_DMA=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=932
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
deleted file mode 100644
index 0d814770b07fe9..00000000000000
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7710=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_PCLK_FREQ=32768000
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_U32=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_PHONE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
deleted file mode 100644
index cbc9389a89a8c0..00000000000000
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
deleted file mode 100644
index 2579dc4bc0c8f6..00000000000000
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7757=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x0f000000
-CONFIG_PMB=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH7757LCR=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_WLAN is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_SPI=y
-CONFIG_SPI_SH=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SH=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_SH=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_SQUASHFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
deleted file mode 100644
index 8a6a446f9eb88a..00000000000000
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_SH7763RDP=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
deleted file mode 100644
index ee2357deba0f1c..00000000000000
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7770=y
-CONFIG_SH_PCLK_FREQ=41666666
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_PM=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
deleted file mode 100644
index 781ff13227fc99..00000000000000
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ /dev/null
@@ -1,149 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_GCOV_KERNEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_R8169=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_MFD_SM501=y
-# CONFIG_VGA_ARB is not set
-CONFIG_FB=y
-CONFIG_FB_KYRO=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_VERBOSE=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_CMIPCI=y
-CONFIG_SND_EMU10K1=y
-# CONFIG_SND_SUPERH is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_LATENCYTOP=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
deleted file mode 100644
index 1b88929083f786..00000000000000
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_R8169=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
deleted file mode 100644
index e078b193a78a89..00000000000000
--- a/arch/sh/configs/shmin_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7706=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SHMIN=y
-CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
deleted file mode 100644
index aa353dff7f1931..00000000000000
--- a/arch/sh/configs/shx3_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SHX3=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_PAGE_SIZE_64KB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_X3PROTO=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_VM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
deleted file mode 100644
index 73a0d68b0de6ce..00000000000000
--- a/arch/sh/configs/titan_defconfig
+++ /dev/null
@@ -1,272 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x08030000
-CONFIG_MEMORY_SIZE=0x7fd0000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_TITAN=y
-CONFIG_SH_PCLK_FREQ=30000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_DIAG=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139_OLD_RX_RESET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
deleted file mode 100644
index 103b81ec1ffb91..00000000000000
--- a/arch/sh/configs/ul2_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7366=y
-CONFIG_MEMORY_SIZE=0x01f00000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
deleted file mode 100644
index 8fc687c98fd195..00000000000000
--- a/arch/sh/configs/urquell_defconfig
+++ /dev/null
@@ -1,147 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_URQUELL=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_PCI_DEBUG=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_SKY2=y
-CONFIG_SKY2_DEBUG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-CONFIG_MFD_SM501=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FTRACE is not set
-# CONFIG_DUMP_CODE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
deleted file mode 100644
index 80a45ad2852fdf..00000000000000
--- a/arch/sh/drivers/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "arch/sh/drivers/dma/Kconfig"
-source "arch/sh/cchips/Kconfig"
-
-menu "Additional SuperH Device Drivers"
-
-config HEARTBEAT
- bool "Heartbeat LED"
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PUSH_SWITCH
- tristate "Push switch support"
- help
- This enables support for the push switch framework, a simple
- framework that allows for sysfs driven switch status reporting.
-
-endmenu
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
deleted file mode 100644
index 56b0acace6e7c8..00000000000000
--- a/arch/sh/drivers/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific device drivers.
-#
-
-obj-y += dma/ platform_early.o
-
-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
-obj-$(CONFIG_HEARTBEAT) += heartbeat.o
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
deleted file mode 100644
index 7d54f284ce10fb..00000000000000
--- a/arch/sh/drivers/dma/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "DMA support"
-
-
-config SH_DMA
- bool "SuperH on-chip DMA controller (DMAC) support"
- depends on CPU_SH3 || CPU_SH4
- default n
-
-config SH_DMA_IRQ_MULTI
- bool
- depends on SH_DMA
- default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
- CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
- CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7760
-
-config SH_DMA_API
- depends on SH_DMA
- bool "SuperH DMA API support"
- default n
- help
- SH_DMA_API always enabled DMA API of used SuperH.
- If you want to use DMA ENGINE, you must not enable this.
- Please enable DMA_ENGINE and SH_DMAE.
-
-config NR_ONCHIP_DMA_CHANNELS
- int
- depends on SH_DMA
- default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091
- default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
- CPU_SUBTYPE_SH7760
- default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
- default "6"
- help
- This allows you to specify the number of channels that the on-chip
- DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
- SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
-
-config SH_DMABRG
- bool "SH7760 DMABRG support"
- depends on CPU_SUBTYPE_SH7760
- help
- The DMABRG does data transfers from main memory to Audio/USB units
- of the SH7760.
- Say Y if you want to use Audio/USB DMA on your SH7760 board.
-
-config PVR2_DMA
- tristate "PowerVR 2 DMAC support"
- depends on SH_DREAMCAST && SH_DMA
- help
- Selecting this will enable support for the PVR2 DMA controller.
- As this chains off of the on-chip DMAC, that must also be
- enabled by default.
-
- This is primarily used by the pvr2fb framebuffer driver for
- certain optimizations, but is not necessary for functionality.
-
- If in doubt, say N.
-
-config G2_DMA
- tristate "G2 Bus DMA support"
- depends on SH_DREAMCAST && SH_DMA_API
- help
- This enables support for the DMA controller for the Dreamcast's
- G2 bus. Drivers that want this will generally enable this on
- their own.
-
- If in doubt, say N.
-
-endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
deleted file mode 100644
index d2fdd56208f6e3..00000000000000
--- a/arch/sh/drivers/dma/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH DMA specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
-obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
-obj-$(CONFIG_G2_DMA) += dma-g2.o
-obj-$(CONFIG_SH_DMABRG) += dmabrg.o
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
deleted file mode 100644
index ab9170494dcc29..00000000000000
--- a/arch/sh/drivers/dma/dma-api.c
+++ /dev/null
@@ -1,417 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-api.c
- *
- * SuperH-specific DMA management API
- *
- * Copyright (C) 2003, 2004, 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-
-DEFINE_SPINLOCK(dma_spin_lock);
-static LIST_HEAD(registered_dmac_list);
-
-struct dma_info *get_dma_info(unsigned int chan)
-{
- struct dma_info *info;
-
- /*
- * Look for each DMAC's range to determine who the owner of
- * the channel is.
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if ((chan < info->first_vchannel_nr) ||
- (chan >= info->first_vchannel_nr + info->nr_channels))
- continue;
-
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info);
-
-struct dma_info *get_dma_info_by_name(const char *dmac_name)
-{
- struct dma_info *info;
-
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if (dmac_name && (strcmp(dmac_name, info->name) != 0))
- continue;
- else
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info_by_name);
-
-static unsigned int get_nr_channels(void)
-{
- struct dma_info *info;
- unsigned int nr = 0;
-
- if (unlikely(list_empty(®istered_dmac_list)))
- return nr;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- nr += info->nr_channels;
-
- return nr;
-}
-
-struct dma_channel *get_dma_channel(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel;
- int i;
-
- if (unlikely(!info))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (channel->vchan == chan)
- return channel;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_channel);
-
-int get_dma_residue(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->get_residue)
- return info->ops->get_residue(channel);
-
- return 0;
-}
-EXPORT_SYMBOL(get_dma_residue);
-
-static int search_cap(const char **haystack, const char *needle)
-{
- const char **p;
-
- for (p = haystack; *p; p++)
- if (strcmp(*p, needle) == 0)
- return 1;
-
- return 0;
-}
-
-/**
- * request_dma_bycap - Allocate a DMA channel based on its capabilities
- * @dmac: List of DMA controllers to search
- * @caps: List of capabilities
- *
- * Search all channels of all DMA controllers to find a channel which
- * matches the requested capabilities. The result is the channel
- * number if a match is found, or %-ENODEV if no match is found.
- *
- * Note that not all DMA controllers export capabilities, in which
- * case they can never be allocated using this API, and so
- * request_dma() must be used specifying the channel number.
- */
-int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
-{
- unsigned int found = 0;
- struct dma_info *info;
- const char **p;
- int i;
-
- BUG_ON(!dmac || !caps);
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(*dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (!found)
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = &info->channels[i];
-
- if (unlikely(!channel->caps))
- continue;
-
- for (p = caps; *p; p++) {
- if (!search_cap(channel->caps, *p))
- break;
- if (request_dma(channel->chan, dev_id) == 0)
- return channel->chan;
- }
- }
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(request_dma_bycap);
-
-int dmac_search_free_channel(const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(0);
- int i;
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (unlikely(!channel))
- return -ENODEV;
-
- if (atomic_read(&channel->busy) == 0)
- break;
- }
-
- if (info->ops->request) {
- int result = info->ops->request(channel);
- if (result)
- return result;
-
- atomic_set(&channel->busy, 1);
- return channel->chan;
- }
-
- return -ENOSYS;
-}
-
-int request_dma(unsigned int chan, const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(chan);
- int result;
-
- channel = get_dma_channel(chan);
- if (atomic_xchg(&channel->busy, 1))
- return -EBUSY;
-
- strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
-
- if (info->ops->request) {
- result = info->ops->request(channel);
- if (result)
- atomic_set(&channel->busy, 0);
-
- return result;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(request_dma);
-
-void free_dma(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->free)
- info->ops->free(channel);
-
- atomic_set(&channel->busy, 0);
-}
-EXPORT_SYMBOL(free_dma);
-
-void dma_wait_for_completion(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (channel->flags & DMA_TEI_CAPABLE) {
- wait_event(channel->wait_queue,
- (info->ops->get_residue(channel) == 0));
- return;
- }
-
- while (info->ops->get_residue(channel))
- cpu_relax();
-}
-EXPORT_SYMBOL(dma_wait_for_completion);
-
-int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
-{
- struct dma_info *info;
- unsigned int found = 0;
- int i;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (unlikely(!found))
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++, caps++) {
- struct dma_channel *channel;
-
- if ((info->first_channel_nr + i) != caps->ch_num)
- return -EINVAL;
-
- channel = &info->channels[i];
- channel->caps = caps->caplist;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(register_chan_caps);
-
-void dma_configure_channel(unsigned int chan, unsigned long flags)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->configure)
- info->ops->configure(channel, flags);
-}
-EXPORT_SYMBOL(dma_configure_channel);
-
-int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- channel->sar = from;
- channel->dar = to;
- channel->count = size;
- channel->mode = mode;
-
- return info->ops->xfer(channel);
-}
-EXPORT_SYMBOL(dma_xfer);
-
-int dma_extend(unsigned int chan, unsigned long op, void *param)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->extend)
- return info->ops->extend(channel, op, param);
-
- return -ENOSYS;
-}
-EXPORT_SYMBOL(dma_extend);
-
-static int dma_proc_show(struct seq_file *m, void *v)
-{
- struct dma_info *info = v;
-
- if (list_empty(®istered_dmac_list))
- return 0;
-
- /*
- * Iterate over each registered DMAC
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- int i;
-
- /*
- * Iterate over each channel
- */
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = info->channels + i;
-
- if (!(channel->flags & DMA_CONFIGURED))
- continue;
-
- seq_printf(m, "%2d: %14s %s\n", i,
- info->name, channel->dev_id);
- }
- }
-
- return 0;
-}
-
-int register_dmac(struct dma_info *info)
-{
- unsigned int total_channels, i;
-
- INIT_LIST_HEAD(&info->list);
-
- printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
- info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
-
- BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
-
- info->pdev = platform_device_register_simple(info->name, -1,
- NULL, 0);
- if (IS_ERR(info->pdev))
- return PTR_ERR(info->pdev);
-
- /*
- * Don't touch pre-configured channels
- */
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) {
- unsigned int size;
-
- size = sizeof(struct dma_channel) * info->nr_channels;
-
- info->channels = kzalloc(size, GFP_KERNEL);
- if (!info->channels)
- return -ENOMEM;
- }
-
- total_channels = get_nr_channels();
- info->first_vchannel_nr = total_channels;
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *chan = &info->channels[i];
-
- atomic_set(&chan->busy, 0);
-
- chan->chan = info->first_channel_nr + i;
- chan->vchan = info->first_channel_nr + i + total_channels;
-
- memcpy(chan->dev_id, "Unused", 7);
-
- if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
- chan->flags |= DMA_TEI_CAPABLE;
-
- init_waitqueue_head(&chan->wait_queue);
- dma_create_sysfs_files(chan, info);
- }
-
- list_add(&info->list, ®istered_dmac_list);
-
- return 0;
-}
-EXPORT_SYMBOL(register_dmac);
-
-void unregister_dmac(struct dma_info *info)
-{
- unsigned int i;
-
- for (i = 0; i < info->nr_channels; i++)
- dma_remove_sysfs_files(info->channels + i, info);
-
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
- kfree(info->channels);
-
- list_del(&info->list);
- platform_device_unregister(info->pdev);
-}
-EXPORT_SYMBOL(unregister_dmac);
-
-static int __init dma_api_init(void)
-{
- printk(KERN_NOTICE "DMA: Registering DMA API.\n");
- return proc_create_single("dma", 0, NULL, dma_proc_show) ? 0 : -ENOMEM;
-}
-subsys_initcall(dma_api_init);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("DMA API for SuperH");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
deleted file mode 100644
index 52a8ae5e30d2fb..00000000000000
--- a/arch/sh/drivers/dma/dma-g2.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-g2.c
- *
- * G2 bus DMA support
- *
- * Copyright (C) 2003 - 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <asm/cacheflush.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-
-struct g2_channel {
- unsigned long g2_addr; /* G2 bus address */
- unsigned long root_addr; /* Root bus (SH-4) address */
- unsigned long size; /* Size (in bytes), 32-byte aligned */
- unsigned long direction; /* Transfer direction */
- unsigned long ctrl; /* Transfer control */
- unsigned long chan_enable; /* Channel enable */
- unsigned long xfer_enable; /* Transfer enable */
- unsigned long xfer_stat; /* Transfer status */
-} __attribute__ ((aligned(32)));
-
-struct g2_status {
- unsigned long g2_addr;
- unsigned long root_addr;
- unsigned long size;
- unsigned long status;
-} __attribute__ ((aligned(16)));
-
-struct g2_dma_info {
- struct g2_channel channel[G2_NR_DMA_CHANNELS];
- unsigned long pad1[G2_NR_DMA_CHANNELS];
- unsigned long wait_state;
- unsigned long pad2[10];
- unsigned long magic;
- struct g2_status status[G2_NR_DMA_CHANNELS];
-} __attribute__ ((aligned(256)));
-
-static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
-
-#define g2_bytes_remaining(i) \
- ((g2_dma->channel[i].size - \
- g2_dma->status[i].size) & 0x0fffffff)
-
-static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
-{
- int i;
-
- for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
- if (g2_dma->status[i].status & 0x20000000) {
- unsigned int bytes = g2_bytes_remaining(i);
-
- if (likely(bytes == 0)) {
- struct dma_info *info = dev_id;
- struct dma_channel *chan = info->channels + i;
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
- }
- }
- }
-
- return IRQ_NONE;
-}
-
-static int g2_enable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 1;
- g2_dma->channel[chan_nr].xfer_enable = 1;
-
- return 0;
-}
-
-static int g2_disable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 0;
- g2_dma->channel[chan_nr].xfer_enable = 0;
-
- return 0;
-}
-
-static int g2_xfer_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- if (chan->sar & 31) {
- printk("g2dma: unaligned source 0x%lx\n", chan->sar);
- return -EINVAL;
- }
-
- if (chan->dar & 31) {
- printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
- return -EINVAL;
- }
-
- /* Align the count */
- if (chan->count & 31)
- chan->count = (chan->count + (32 - 1)) & ~(32 - 1);
-
- /* Fixup destination */
- chan->dar += 0xa0800000;
-
- /* Fixup direction */
- chan->mode = !chan->mode;
-
- flush_icache_range((unsigned long)chan->sar, chan->count);
-
- g2_disable_dma(chan);
-
- g2_dma->channel[chan_nr].g2_addr = chan->dar & 0x1fffffe0;
- g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0;
- g2_dma->channel[chan_nr].size = (chan->count & ~31) | 0x80000000;
- g2_dma->channel[chan_nr].direction = chan->mode;
-
- /*
- * bit 0 - ???
- * bit 1 - if set, generate a hardware event on transfer completion
- * bit 2 - ??? something to do with suspend?
- */
- g2_dma->channel[chan_nr].ctrl = 5; /* ?? */
-
- g2_enable_dma(chan);
-
- /* debug cruft */
- pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, "
- "0x%08lx, %ld, %ld, %ld, %ld\n",
- g2_dma->channel[chan_nr].size,
- g2_dma->channel[chan_nr].root_addr,
- g2_dma->channel[chan_nr].g2_addr,
- g2_dma->channel[chan_nr].direction,
- g2_dma->channel[chan_nr].ctrl,
- g2_dma->channel[chan_nr].chan_enable,
- g2_dma->channel[chan_nr].xfer_enable);
-
- return 0;
-}
-
-static int g2_get_residue(struct dma_channel *chan)
-{
- return g2_bytes_remaining(chan->chan);
-}
-
-static struct dma_ops g2_dma_ops = {
- .xfer = g2_xfer_dma,
- .get_residue = g2_get_residue,
-};
-
-static struct dma_info g2_dma_info = {
- .name = "g2_dmac",
- .nr_channels = 4,
- .ops = &g2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init g2_dma_init(void)
-{
- int ret;
-
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
- "g2 DMA handler", &g2_dma_info);
- if (unlikely(ret))
- return -EINVAL;
-
- /* Magic */
- g2_dma->wait_state = 27;
- g2_dma->magic = 0x4659404f;
-
- ret = register_dmac(&g2_dma_info);
- if (unlikely(ret != 0))
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
-
- return ret;
-}
-
-static void __exit g2_dma_exit(void)
-{
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
- unregister_dmac(&g2_dma_info);
-}
-
-subsys_initcall(g2_dma_init);
-module_exit(g2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("G2 bus DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
deleted file mode 100644
index 21c347543e193d..00000000000000
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-pvr2.c
- *
- * NEC PowerVR 2 (Dreamcast) DMA support
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-static unsigned int xfer_complete;
-static int count;
-
-static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
-{
- if (get_dma_residue(PVR2_CASCADE_CHAN)) {
- printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
- "on channel %d, waiting..\n", PVR2_CASCADE_CHAN);
- dma_wait_for_completion(PVR2_CASCADE_CHAN);
- }
-
- if (count++ < 10)
- pr_debug("Got a pvr2 dma interrupt for channel %d\n",
- irq - HW_EVENT_PVR2_DMA);
-
- xfer_complete = 1;
-
- return IRQ_HANDLED;
-}
-
-static int pvr2_request_dma(struct dma_channel *chan)
-{
- if (__raw_readl(PVR2_DMA_MODE) != 0)
- return -EBUSY;
-
- __raw_writel(0, PVR2_DMA_LMMODE0);
-
- return 0;
-}
-
-static int pvr2_get_dma_residue(struct dma_channel *chan)
-{
- return xfer_complete == 0;
-}
-
-static int pvr2_xfer_dma(struct dma_channel *chan)
-{
- if (chan->sar || !chan->dar)
- return -EINVAL;
-
- xfer_complete = 0;
-
- __raw_writel(chan->dar, PVR2_DMA_ADDR);
- __raw_writel(chan->count, PVR2_DMA_COUNT);
- __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
-
- return 0;
-}
-
-static struct dma_ops pvr2_dma_ops = {
- .request = pvr2_request_dma,
- .get_residue = pvr2_get_dma_residue,
- .xfer = pvr2_xfer_dma,
-};
-
-static struct dma_info pvr2_dma_info = {
- .name = "pvr2_dmac",
- .nr_channels = 1,
- .ops = &pvr2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init pvr2_dma_init(void)
-{
- if (request_irq(HW_EVENT_PVR2_DMA, pvr2_dma_interrupt, 0,
- "pvr2 DMA handler", NULL))
- pr_err("Failed to register pvr2 DMA handler interrupt\n");
- request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade");
-
- return register_dmac(&pvr2_dma_info);
-}
-
-static void __exit pvr2_dma_exit(void)
-{
- free_dma(PVR2_CASCADE_CHAN);
- free_irq(HW_EVENT_PVR2_DMA, 0);
- unregister_dmac(&pvr2_dma_info);
-}
-
-subsys_initcall(pvr2_dma_init);
-module_exit(pvr2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
deleted file mode 100644
index 96c626c2cd0a49..00000000000000
--- a/arch/sh/drivers/dma/dma-sh.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sh.c
- *
- * SuperH On-chip DMAC Support
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach-dreamcast/mach/dma.h>
-#include <asm/dma.h>
-#include <asm/dma-register.h>
-#include <cpu/dma-register.h>
-#include <cpu/dma.h>
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
-
-static unsigned long dma_find_base(unsigned int chan)
-{
- unsigned long base = SH_DMAC_BASE0;
-
-#ifdef SH_DMAC_BASE1
- if (chan >= 6)
- base = SH_DMAC_BASE1;
-#endif
-
- return base;
-}
-
-static unsigned long dma_base_addr(unsigned int chan)
-{
- unsigned long base = dma_find_base(chan);
-
- /* Normalize offset calculation */
- if (chan >= 9)
- chan -= 6;
- if (chan >= 4)
- base += 0x10;
-
- return base + (chan * 0x10);
-}
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return chan >= 6 ? DMTE6_IRQ : DMTE0_IRQ;
-}
-#else
-
-static unsigned int dmte_irq_map[] = {
- DMTE0_IRQ, DMTE0_IRQ + 1, DMTE0_IRQ + 2, DMTE0_IRQ + 3,
-
-#ifdef DMTE4_IRQ
- DMTE4_IRQ, DMTE4_IRQ + 1,
-#endif
-
-#ifdef DMTE6_IRQ
- DMTE6_IRQ, DMTE6_IRQ + 1,
-#endif
-
-#ifdef DMTE8_IRQ
- DMTE8_IRQ, DMTE9_IRQ, DMTE10_IRQ, DMTE11_IRQ,
-#endif
-};
-
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return dmte_irq_map[chan];
-}
-#endif
-
-/*
- * We determine the correct shift size based off of the CHCR transmit size
- * for the given channel. Since we know that it will take:
- *
- * info->count >> ts_shift[transmit_size]
- *
- * iterations to complete the transfer.
- */
-static unsigned int ts_shift[] = TS_SHIFT;
-
-static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
-{
- u32 chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
- ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
-
- return ts_shift[cnt];
-}
-
-/*
- * The transfer end interrupt must read the chcr register to end the
- * hardware interrupt active condition.
- * Besides that it needs to waken any waiting process, which should handle
- * setting up the next transfer.
- */
-static irqreturn_t dma_tei(int irq, void *dev_id)
-{
- struct dma_channel *chan = dev_id;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
-
- if (!(chcr & CHCR_TE))
- return IRQ_NONE;
-
- chcr &= ~(CHCR_IE | CHCR_DE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
-}
-
-static int sh_dmac_request_dma(struct dma_channel *chan)
-{
- if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
- return 0;
-
- return request_irq(get_dmte_irq(chan->chan), dma_tei, IRQF_SHARED,
- chan->dev_id, chan);
-}
-
-static void sh_dmac_free_dma(struct dma_channel *chan)
-{
- free_irq(get_dmte_irq(chan->chan), chan);
-}
-
-static int
-sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
-{
- if (!chcr)
- chcr = RS_DUAL | CHCR_IE;
-
- if (chcr & CHCR_IE) {
- chcr &= ~CHCR_IE;
- chan->flags |= DMA_TEI_CAPABLE;
- } else {
- chan->flags &= ~DMA_TEI_CAPABLE;
- }
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- chan->flags |= DMA_CONFIGURED;
- return 0;
-}
-
-static void sh_dmac_enable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr |= CHCR_DE;
-
- if (chan->flags & DMA_TEI_CAPABLE)
- chcr |= CHCR_IE;
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- enable_irq(irq);
- }
-}
-
-static void sh_dmac_disable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- disable_irq(irq);
- }
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-}
-
-static int sh_dmac_xfer_dma(struct dma_channel *chan)
-{
- /*
- * If we haven't pre-configured the channel with special flags, use
- * the defaults.
- */
- if (unlikely(!(chan->flags & DMA_CONFIGURED)))
- sh_dmac_configure_channel(chan, 0);
-
- sh_dmac_disable_dma(chan);
-
- /*
- * Single-address mode usage note!
- *
- * It's important that we don't accidentally write any value to SAR/DAR
- * (this includes 0) that hasn't been directly specified by the user if
- * we're in single-address mode.
- *
- * In this case, only one address can be defined, anything else will
- * result in a DMA address error interrupt (at least on the SH-4),
- * which will subsequently halt the transfer.
- *
- * Channel 2 on the Dreamcast is a special case, as this is used for
- * cascading to the PVR2 DMAC. In this case, we still need to write
- * SAR and DAR, regardless of value, in order for cascading to work.
- */
- if (chan->sar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->sar, (dma_base_addr(chan->chan) + SAR));
- if (chan->dar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->dar, (dma_base_addr(chan->chan) + DAR));
-
- __raw_writel(chan->count >> calc_xmit_shift(chan),
- (dma_base_addr(chan->chan) + TCR));
-
- sh_dmac_enable_dma(chan);
-
- return 0;
-}
-
-static int sh_dmac_get_dma_residue(struct dma_channel *chan)
-{
- if (!(__raw_readl(dma_base_addr(chan->chan) + CHCR) & CHCR_DE))
- return 0;
-
- return __raw_readl(dma_base_addr(chan->chan) + TCR)
- << calc_xmit_shift(chan);
-}
-
-/*
- * DMAOR handling
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define NR_DMAOR 2
-#else
-#define NR_DMAOR 1
-#endif
-
-/*
- * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
- * channels 0 - 5, DMAOR1 6 - 11 (optional).
- */
-#define dmaor_read_reg(n) __raw_readw(dma_find_base((n)*6))
-#define dmaor_write_reg(n, data) __raw_writew(data, dma_find_base(n)*6)
-
-static inline int dmaor_reset(int no)
-{
- unsigned long dmaor = dmaor_read_reg(no);
-
- /* Try to clear the error flags first, incase they are set */
- dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
- dmaor_write_reg(no, dmaor);
-
- dmaor |= DMAOR_INIT;
- dmaor_write_reg(no, dmaor);
-
- /* See if we got an error again */
- if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
- printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * DMAE handling
- */
-#ifdef CONFIG_CPU_SH4
-
-#if defined(DMAE1_IRQ)
-#define NR_DMAE 2
-#else
-#define NR_DMAE 1
-#endif
-
-static const char *dmae_name[] = {
- "DMAC Address Error0",
- "DMAC Address Error1"
-};
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dma_error_irq(int n)
-{
- return get_dmte_irq(n * 6);
-}
-#else
-
-static unsigned int dmae_irq_map[] = {
- DMAE0_IRQ,
-
-#ifdef DMAE1_IRQ
- DMAE1_IRQ,
-#endif
-};
-
-static inline unsigned int get_dma_error_irq(int n)
-{
- return dmae_irq_map[n];
-}
-#endif
-
-static irqreturn_t dma_err(int irq, void *dummy)
-{
- int i;
-
- for (i = 0; i < NR_DMAOR; i++)
- dmaor_reset(i);
-
- disable_irq(irq);
-
- return IRQ_HANDLED;
-}
-
-static int dmae_irq_init(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++) {
- int i = request_irq(get_dma_error_irq(n), dma_err,
- IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
- if (unlikely(i < 0)) {
- printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
- return i;
- }
- }
-
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++)
- free_irq(get_dma_error_irq(n), NULL);
-}
-#else
-static inline int dmae_irq_init(void)
-{
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
-}
-#endif
-
-static struct dma_ops sh_dmac_ops = {
- .request = sh_dmac_request_dma,
- .free = sh_dmac_free_dma,
- .get_residue = sh_dmac_get_dma_residue,
- .xfer = sh_dmac_xfer_dma,
- .configure = sh_dmac_configure_channel,
-};
-
-static struct dma_info sh_dmac_info = {
- .name = "sh_dmac",
- .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
- .ops = &sh_dmac_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init sh_dmac_init(void)
-{
- struct dma_info *info = &sh_dmac_info;
- int i, rc;
-
- /*
- * Initialize DMAE, for parts that support it.
- */
- rc = dmae_irq_init();
- if (unlikely(rc != 0))
- return rc;
-
- /*
- * Initialize DMAOR, and clean up any error flags that may have
- * been set.
- */
- for (i = 0; i < NR_DMAOR; i++) {
- rc = dmaor_reset(i);
- if (unlikely(rc != 0))
- return rc;
- }
-
- return register_dmac(info);
-}
-
-static void __exit sh_dmac_exit(void)
-{
- dmae_irq_free();
- unregister_dmac(&sh_dmac_info);
-}
-
-subsys_initcall(sh_dmac_init);
-module_exit(sh_dmac_exit);
-
-MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
-MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
deleted file mode 100644
index 8ef318150f84db..00000000000000
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sysfs.c
- *
- * sysfs interface for SH DMA API
- *
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <asm/dma.h>
-
-static struct bus_type dma_subsys = {
- .name = "dma",
- .dev_name = "dma",
-};
-
-static ssize_t dma_show_devices(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- ssize_t len = 0;
- int i;
-
- for (i = 0; i < 16; i++) {
- struct dma_info *info = get_dma_info(i);
- struct dma_channel *channel = get_dma_channel(i);
-
- if (unlikely(!info) || !channel)
- continue;
-
- len += sprintf(buf + len, "%2d: %14s %s\n",
- channel->chan, info->name,
- channel->dev_id);
- }
-
- return len;
-}
-
-static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
-
-static int __init dma_subsys_init(void)
-{
- int ret;
-
- ret = subsys_system_register(&dma_subsys, NULL);
- if (unlikely(ret))
- return ret;
-
- return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
-}
-postcore_initcall(dma_subsys_init);
-
-static ssize_t dma_show_dev_id(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "%s\n", channel->dev_id);
-}
-
-static ssize_t dma_store_dev_id(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- strcpy(channel->dev_id, buf);
- return count;
-}
-
-static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
-
-static ssize_t dma_store_config(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- unsigned long config;
-
- config = simple_strtoul(buf, NULL, 0);
- dma_configure_channel(channel->vchan, config);
-
- return count;
-}
-
-static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
-
-static ssize_t dma_show_mode(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "0x%08x\n", channel->mode);
-}
-
-static ssize_t dma_store_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- channel->mode = simple_strtoul(buf, NULL, 0);
- return count;
-}
-
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
-
-#define dma_ro_attr(field, fmt) \
-static ssize_t dma_show_##field(struct device *dev, \
- struct device_attribute *attr, char *buf)\
-{ \
- struct dma_channel *channel = to_dma_channel(dev); \
- return sprintf(buf, fmt, channel->field); \
-} \
-static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
-
-dma_ro_attr(count, "0x%08x\n");
-dma_ro_attr(flags, "0x%08lx\n");
-
-int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
- int ret;
-
- dev->id = chan->vchan;
- dev->bus = &dma_subsys;
-
- ret = device_register(dev);
- if (ret)
- return ret;
-
- ret |= device_create_file(dev, &dev_attr_dev_id);
- ret |= device_create_file(dev, &dev_attr_count);
- ret |= device_create_file(dev, &dev_attr_mode);
- ret |= device_create_file(dev, &dev_attr_flags);
- ret |= device_create_file(dev, &dev_attr_config);
-
- if (unlikely(ret)) {
- dev_err(&info->pdev->dev, "Failed creating attrs\n");
- return ret;
- }
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
-}
-
-void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
-
- device_remove_file(dev, &dev_attr_dev_id);
- device_remove_file(dev, &dev_attr_count);
- device_remove_file(dev, &dev_attr_mode);
- device_remove_file(dev, &dev_attr_flags);
- device_remove_file(dev, &dev_attr_config);
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- sysfs_remove_link(&info->pdev->dev.kobj, name);
-
- device_unregister(dev);
-}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
deleted file mode 100644
index 5b2c1fd254d729..00000000000000
--- a/arch/sh/drivers/dma/dmabrg.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 DMABRG IRQ handling
- *
- * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-#include <asm/dmabrg.h>
-#include <asm/io.h>
-
-/*
- * The DMABRG is a special DMA unit within the SH7760. It does transfers
- * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
- * part is sensibly placed in the LCDC registers and requires no irqs)
- * It has 3 IRQ lines which trigger 10 events, and works independently
- * from the traditional SH DMAC (although it blocks usage of DMAC 0)
- *
- * BRGIRQID | component | dir | meaning | source
- * -----------------------------------------------------
- * 0 | USB-DMA | ... | xfer done | DMABRGI1
- * 1 | USB-UAE | ... | USB addr err.| DMABRGI0
- * 2 | HAC0/SSI0 | play| all done | DMABRGI1
- * 3 | HAC0/SSI0 | play| half done | DMABRGI2
- * 4 | HAC0/SSI0 | rec | all done | DMABRGI1
- * 5 | HAC0/SSI0 | rec | half done | DMABRGI2
- * 6 | HAC1/SSI1 | play| all done | DMABRGI1
- * 7 | HAC1/SSI1 | play| half done | DMABRGI2
- * 8 | HAC1/SSI1 | rec | all done | DMABRGI1
- * 9 | HAC1/SSI1 | rec | half done | DMABRGI2
- *
- * all can be enabled/disabled in the DMABRGCR register,
- * as well as checked if they occurred.
- *
- * DMABRGI0 services USB DMA Address errors, but it still must be
- * enabled/acked in the DMABRGCR register. USB-DMA complete indicator
- * is grouped together with the audio buffer end indicators, too bad...
- *
- * DMABRGCR: Bits 31-24: audio-dma ENABLE flags,
- * Bits 23-16: audio-dma STATUS flags,
- * Bits 9-8: USB error/xfer ENABLE,
- * Bits 1-0: USB error/xfer STATUS.
- * Ack an IRQ by writing 0 to the STATUS flag.
- * Mask IRQ by writing 0 to ENABLE flag.
- *
- * Usage is almost like with any other IRQ:
- * dmabrg_request_irq(BRGIRQID, handler, data)
- * dmabrg_free_irq(BRGIRQID)
- *
- * handler prototype: void brgirqhandler(void *data)
- */
-
-#define DMARSRA 0xfe090000
-#define DMAOR 0xffa00040
-#define DMACHCR0 0xffa0000c
-#define DMABRGCR 0xfe3c0000
-
-#define DMAOR_BRG 0x0000c000
-#define DMAOR_DMEN 0x00000001
-
-#define DMABRGI0 68
-#define DMABRGI1 69
-#define DMABRGI2 70
-
-struct dmabrg_handler {
- void (*handler)(void *);
- void *data;
-} *dmabrg_handlers;
-
-static inline void dmabrg_call_handler(int i)
-{
- dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
-}
-
-/*
- * main DMABRG irq handler. It acks irqs and then
- * handles every set and unmasked bit sequentially.
- * No locking and no validity checks; it should be
- * as fast as possible (audio!)
- */
-static irqreturn_t dmabrg_irq(int irq, void *data)
-{
- unsigned long dcr;
- unsigned int i;
-
- dcr = __raw_readl(DMABRGCR);
- __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
- dcr &= dcr >> 8; /* ignore masked */
-
- /* USB stuff, get it out of the way first */
- if (dcr & 1)
- dmabrg_call_handler(DMABRGIRQ_USBDMA);
- if (dcr & 2)
- dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
-
- /* Audio */
- dcr >>= 16;
- while (dcr) {
- i = __ffs(dcr);
- dcr &= dcr - 1;
- dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
- }
- return IRQ_HANDLED;
-}
-
-static void dmabrg_disable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-static void dmabrg_enable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
- void *data)
-{
- if ((dmairq > 9) || !handler)
- return -ENOENT;
- if (dmabrg_handlers[dmairq].handler)
- return -EBUSY;
-
- dmabrg_handlers[dmairq].handler = handler;
- dmabrg_handlers[dmairq].data = data;
-
- dmabrg_enable_irq(dmairq);
- return 0;
-}
-EXPORT_SYMBOL_GPL(dmabrg_request_irq);
-
-void dmabrg_free_irq(unsigned int dmairq)
-{
- if (likely(dmairq < 10)) {
- dmabrg_disable_irq(dmairq);
- dmabrg_handlers[dmairq].handler = NULL;
- dmabrg_handlers[dmairq].data = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(dmabrg_free_irq);
-
-static int __init dmabrg_init(void)
-{
- unsigned long or;
- int ret;
-
- dmabrg_handlers = kcalloc(10, sizeof(struct dmabrg_handler),
- GFP_KERNEL);
- if (!dmabrg_handlers)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_DMA
- /* request DMAC channel 0 before anyone else can get it */
- ret = request_dma(0, "DMAC 0 (DMABRG)");
- if (ret < 0)
- printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
-#endif
-
- __raw_writel(0, DMABRGCR);
- __raw_writel(0, DMACHCR0);
- __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
-
- /* enable DMABRG mode, enable the DMAC */
- or = __raw_readl(DMAOR);
- __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
-
- ret = request_irq(DMABRGI0, dmabrg_irq, 0,
- "DMABRG USB address error", NULL);
- if (ret)
- goto out0;
-
- ret = request_irq(DMABRGI1, dmabrg_irq, 0,
- "DMABRG Transfer End", NULL);
- if (ret)
- goto out1;
-
- ret = request_irq(DMABRGI2, dmabrg_irq, 0,
- "DMABRG Transfer Half", NULL);
- if (ret == 0)
- return ret;
-
- free_irq(DMABRGI1, NULL);
-out1: free_irq(DMABRGI0, NULL);
-out0: kfree(dmabrg_handlers);
- return ret;
-}
-subsys_initcall(dmabrg_init);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
deleted file mode 100644
index 24391b444b286d..00000000000000
--- a/arch/sh/drivers/heartbeat.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic heartbeat driver for regular LED banks
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- *
- * Most SH reference boards include a number of individual LEDs that can
- * be independently controlled (either via a pre-defined hardware
- * function or via the LED class, if desired -- the hardware tends to
- * encapsulate some of the same "triggers" that the LED class supports,
- * so there's not too much value in it).
- *
- * Additionally, most of these boards also have a LED bank that we've
- * traditionally used for strobing the load average. This use case is
- * handled by this driver, rather than giving each LED bit position its
- * own struct device.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/sched/loadavg.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <asm/heartbeat.h>
-
-#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.2"
-
-static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-
-static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
- unsigned bit, unsigned int inverted)
-{
- unsigned int new;
-
- new = (1 << hd->bit_pos[bit]);
- if (inverted)
- new = ~new;
-
- new &= hd->mask;
-
- switch (hd->regsize) {
- case 32:
- new |= ioread32(hd->base) & ~hd->mask;
- iowrite32(new, hd->base);
- break;
- case 16:
- new |= ioread16(hd->base) & ~hd->mask;
- iowrite16(new, hd->base);
- break;
- default:
- new |= ioread8(hd->base) & ~hd->mask;
- iowrite8(new, hd->base);
- break;
- }
-}
-
-static void heartbeat_timer(struct timer_list *t)
-{
- struct heartbeat_data *hd = from_timer(hd, t, timer);
- static unsigned bit = 0, up = 1;
-
- heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED);
-
- bit += up;
- if ((bit == 0) || (bit == (hd->nr_bits)-1))
- up = -up;
-
- mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
- ((avenrun[0] / 5) + (3 << FSHIFT)))));
-}
-
-static int heartbeat_drv_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct heartbeat_data *hd;
- int i;
-
- if (unlikely(pdev->num_resources != 1)) {
- dev_err(&pdev->dev, "invalid number of resources\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- if (pdev->dev.platform_data) {
- hd = pdev->dev.platform_data;
- } else {
- hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
- if (unlikely(!hd))
- return -ENOMEM;
- }
-
- hd->base = ioremap(res->start, resource_size(res));
- if (unlikely(!hd->base)) {
- dev_err(&pdev->dev, "ioremap failed\n");
-
- if (!pdev->dev.platform_data)
- kfree(hd);
-
- return -ENXIO;
- }
-
- if (!hd->nr_bits) {
- hd->bit_pos = default_bit_pos;
- hd->nr_bits = ARRAY_SIZE(default_bit_pos);
- }
-
- hd->mask = 0;
- for (i = 0; i < hd->nr_bits; i++)
- hd->mask |= (1 << hd->bit_pos[i]);
-
- if (!hd->regsize) {
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_32BIT:
- hd->regsize = 32;
- break;
- case IORESOURCE_MEM_16BIT:
- hd->regsize = 16;
- break;
- case IORESOURCE_MEM_8BIT:
- default:
- hd->regsize = 8;
- break;
- }
- }
-
- timer_setup(&hd->timer, heartbeat_timer, 0);
- platform_set_drvdata(pdev, hd);
-
- return mod_timer(&hd->timer, jiffies + 1);
-}
-
-static struct platform_driver heartbeat_driver = {
- .probe = heartbeat_drv_probe,
- .driver = {
- .name = DRV_NAME,
- .suppress_bind_attrs = true,
- },
-};
-
-static int __init heartbeat_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&heartbeat_driver);
-}
-device_initcall(heartbeat_init);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
deleted file mode 100644
index d313fd3ce7091e..00000000000000
--- a/arch/sh/drivers/pci/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the PCI specific kernel interface routines under Linux.
-#
-obj-y += common.o pci.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
-
-obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
- pci-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
-obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03) += fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7786) += fixups-sdk7786.o
-obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN) += fixups-titan.o
-obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
deleted file mode 100644
index 2fd2b77e12cec1..00000000000000
--- a/arch/sh/drivers/pci/common.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
- int top_bus, int busnr, int devfn)
-{
- static struct pci_dev dev;
- static struct pci_bus bus;
-
- dev.bus = &bus;
- dev.sysdata = hose;
- dev.devfn = devfn;
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose->pci_ops;
-
- if(busnr != top_bus)
- /* Fake a parent bus structure. */
- bus.parent = &bus;
- else
- bus.parent = NULL;
-
- return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int __init early_##rw##_config_##size(struct pci_channel *hose, \
- int top_bus, int bus, int devfn, int offset, type value) \
-{ \
- return pci_##rw##_config_##size( \
- fake_pci_dev(hose, top_bus, bus, devfn), \
- offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-int __init pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus)
-{
- u32 pci_devfn;
- unsigned short vid;
- int cap66 = -1;
- u16 stat;
-
- pr_info("PCI: Checking 66MHz capabilities...\n");
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- if (early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_VENDOR_ID, &vid) !=
- PCIBIOS_SUCCESSFUL)
- continue;
- if (vid == 0xffff)
- continue;
-
- /* check 66MHz capability */
- if (cap66 < 0)
- cap66 = 1;
- if (cap66) {
- early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &stat);
- if (!(stat & PCI_STATUS_66MHZ)) {
- printk(KERN_DEBUG
- "PCI: %02x:%02x not 66MHz capable.\n",
- current_bus, pci_devfn);
- cap66 = 0;
- break;
- }
- }
- }
-
- return cap66 > 0;
-}
-
-static void pcibios_enable_err(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, err_timer);
-
- del_timer(&hose->err_timer);
- printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
- enable_irq(hose->err_irq);
-}
-
-static void pcibios_enable_serr(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, serr_timer);
-
- del_timer(&hose->serr_timer);
- printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
- enable_irq(hose->serr_irq);
-}
-
-void pcibios_enable_timers(struct pci_channel *hose)
-{
- if (hose->err_irq) {
- timer_setup(&hose->err_timer, pcibios_enable_err, 0);
- }
-
- if (hose->serr_irq) {
- timer_setup(&hose->serr_timer, pcibios_enable_serr, 0);
- }
-}
-
-/*
- * A simple handler for the regular PCI status errors, called from IRQ
- * context.
- */
-unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status,
- struct pci_channel *hose)
-{
- unsigned int cmd = 0;
-
- if (status & PCI_STATUS_REC_MASTER_ABORT) {
- printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
- cmd |= PCI_STATUS_REC_MASTER_ABORT;
- }
-
- if (status & PCI_STATUS_REC_TARGET_ABORT) {
- printk(KERN_DEBUG "PCI: target abort: ");
- pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_REC_TARGET_ABORT;
- }
-
- if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
- printk(KERN_DEBUG "PCI: parity error detected: ");
- pcibios_report_status(PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
-
- /* Now back off of the IRQ for awhile */
- if (hose->err_irq) {
- disable_irq_nosync(hose->err_irq);
- hose->err_timer.expires = jiffies + HZ;
- add_timer(&hose->err_timer);
- }
- }
-
- return cmd;
-}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
deleted file mode 100644
index 41e4daee8f043f..00000000000000
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-dreamcast.c
- *
- * PCI fixups for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003, 2006 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/dma-map-ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static void gapspci_fixup_resources(struct pci_dev *dev)
-{
- struct pci_channel *p = dev->sysdata;
- struct resource res;
- struct pci_bus_region region;
-
- printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
-
- switch (dev->device) {
- case PCI_DEVICE_ID_SEGA_BBA:
- /*
- * We also assume that dev->devfn == 0
- */
- dev->resource[1].start = p->resources[0].start + 0x100;
- dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
-
- /*
- * This is not a normal BAR, prevent any attempts to move
- * the BAR, as this will result in a bus lock.
- */
- dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
-
- /*
- * Redirect dma memory allocations to special memory window.
- *
- * If this GAPSPCI region were mapped by a BAR, the CPU
- * phys_addr_t would be pci_resource_start(), and the bus
- * address would be pci_bus_address(pci_resource_start()).
- * But apparently there's no BAR mapping it, so we just
- * "know" its CPU address is GAPSPCI_DMA_BASE.
- */
- res.start = GAPSPCI_DMA_BASE;
- res.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1;
- res.flags = IORESOURCE_MEM;
- pcibios_resource_to_bus(dev->bus, ®ion, &res);
- BUG_ON(dma_declare_coherent_memory(&dev->dev,
- res.start,
- region.start,
- resource_size(&res)));
- break;
- default:
- printk("PCI: Failed resource fixup\n");
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The interrupt routing semantics here are quite trivial.
- *
- * We basically only support one interrupt, so we only bother
- * updating a device's interrupt line with this single shared
- * interrupt. Keeps routing quite simple, doesn't it?
- */
- return GAPSPCI_IRQ;
-}
diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
deleted file mode 100644
index 53fa2fc87eec28..00000000000000
--- a/arch/sh/drivers/pci/fixups-landisk.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-landisk.c
- *
- * PCI initialization for the I-O DATA Device, Inc. LANDISK board
- *
- * Copyright (C) 2006 kogiidena
- * Copyright (C) 2010 Nobuhiro Iwamatsu
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- /*
- * slot0: pin1-4 = irq5,6,7,8
- * slot1: pin1-4 = irq6,7,8,5
- * slot2: pin1-4 = irq7,8,5,6
- * slot3: pin1-4 = irq8,5,6,7
- */
- int irq = ((slot + pin - 1) & 0x3) + evt2irq(0x2a0);
-
- if ((slot | (pin - 1)) > 0x3) {
- printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n",
- slot, pin - 1 + 'A');
- return -1;
- }
- return irq;
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
deleted file mode 100644
index 3c9139c5955e6d..00000000000000
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-r7780rp.c
- *
- * Highlander R7780RP-1 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xa20) + slot;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
deleted file mode 100644
index 3f0a6fe1610b61..00000000000000
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-rts7751r2d.c
- *
- * RTS7751R2D / LBOXRE2 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <mach/lboxre2.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-#include <generated/machtypes.h>
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-static u8 rts7751r2d_irq_tab[] = {
- IRQ_PCI_INTA,
- IRQ_PCI_INTB,
- IRQ_PCI_INTC,
- IRQ_PCI_INTD,
-};
-
-static char lboxre2_irq_tab[] = {
- IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- if (mach_is_lboxre2())
- return lboxre2_irq_tab[slot];
- else
- return rts7751r2d_irq_tab[slot];
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- /* Enable all interrupts, so we known what to fix */
- pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
- pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
deleted file mode 100644
index c306040485bd23..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-sdk7780.c
- *
- * PCI fixups for the SDK7780SE03
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define IRQ_INTA evt2irq(0xa20)
-#define IRQ_INTB evt2irq(0xa40)
-#define IRQ_INTC evt2irq(0xa60)
-#define IRQ_INTD evt2irq(0xa80)
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] = {
- /* INTA */
- { IRQ_INTA, IRQ_INTD, IRQ_INTC, IRQ_INTD, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { IRQ_INTB, IRQ_INTA, -1, IRQ_INTA, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTC */
- { IRQ_INTC, IRQ_INTB, -1, IRQ_INTB, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTD */
- { IRQ_INTD, IRQ_INTC, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1 },
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return sdk7780_irq_tab[pin-1][slot];
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7786.c b/arch/sh/drivers/pci/fixups-sdk7786.c
deleted file mode 100644
index 6972af7b4e93d5..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7786.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA PCIe mux handling
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <mach/fpga.h>
-
-/*
- * The SDK7786 FPGA supports mangling of most of the slots in some way or
- * another. Slots 3/4 are special in that only one can be supported at a
- * time, and both appear on port 3 to the PCI bus scan. Enabling slot 4
- * (the horizontal edge connector) will disable slot 3 entirely.
- *
- * Misconfigurations can be detected through the FPGA via the slot
- * resistors to determine card presence. Hotplug remains unsupported.
- */
-static unsigned int slot4en __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (strcmp(str, "slot4en") == 0) {
- slot4en = 1;
- return NULL;
- }
-
- return str;
-}
-
-static int __init sdk7786_pci_init(void)
-{
- u16 data = fpga_read_reg(PCIECR);
-
- /*
- * Enable slot #4 if it's been specified on the command line.
- *
- * Optionally reroute if slot #4 has a card present while slot #3
- * does not, regardless of command line value.
- *
- * Card presence is logically inverted.
- */
- slot4en ?: (!(data & PCIECR_PRST4) && (data & PCIECR_PRST3));
- if (slot4en) {
- pr_info("Activating PCIe slot#4 (disabling slot#3)\n");
-
- data &= ~PCIECR_PCIEMUX1;
- fpga_write_reg(data, PCIECR);
-
- /* Warn about forced rerouting if slot#3 is occupied */
- if ((data & PCIECR_PRST3) == 0) {
- pr_warn("Unreachable card detected in slot#3\n");
- return -EBUSY;
- }
- } else
- pr_info("PCIe slot#4 disabled\n");
-
- return 0;
-}
-postcore_initcall(sdk7786_pci_init);
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
deleted file mode 100644
index 608f6521ceffcd..00000000000000
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *, u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return evt2irq(0x3a0);
- case 1: return evt2irq(0x3a0); /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
deleted file mode 100644
index 7ec4a74ab12c45..00000000000000
--- a/arch/sh/drivers/pci/fixups-sh03.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (dev->bus->number == 0) {
- switch (slot) {
- case 4: return evt2irq(0x2a0); /* eth0 */
- case 8: return evt2irq(0x2a0); /* eth1 */
- case 6: return evt2irq(0x240); /* PCI bridge */
- default:
- printk(KERN_ERR "PCI: Bad IRQ mapping request "
- "for slot %d\n", slot);
- return evt2irq(0x240);
- }
- } else {
- switch (pin) {
- case 0: irq = evt2irq(0x240); break;
- case 1: irq = evt2irq(0x240); break;
- case 2: irq = evt2irq(0x240); break;
- case 3: irq = evt2irq(0x240); break;
- case 4: irq = evt2irq(0x240); break;
- default: irq = -1; break;
- }
- }
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
deleted file mode 100644
index 317225c094137f..00000000000000
--- a/arch/sh/drivers/pci/fixups-snapgear.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author: David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (slot) {
- case 8: /* the PCI bridge */ break;
- case 11: irq = evt2irq(0x300); break; /* USB */
- case 12: irq = evt2irq(0x360); break; /* PCMCIA */
- case 13: irq = evt2irq(0x2a0); break; /* eth0 */
- case 14: irq = evt2irq(0x300); break; /* eth1 */
- case 15: irq = evt2irq(0x360); break; /* safenet (unused) */
- }
-
- printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c
deleted file mode 100644
index b5bb65caa16d6f..00000000000000
--- a/arch/sh/drivers/pci/fixups-titan.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-titan.c
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Modified from ops-snapgear.c written by David McCullough
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the Titan boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/titan.h>
-#include "pci-sh4.h"
-
-static char titan_irq_tab[] = {
- TITAN_IRQ_WAN,
- TITAN_IRQ_LAN,
- TITAN_IRQ_MPCIA,
- TITAN_IRQ_MPCIB,
- TITAN_IRQ_USB,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = titan_irq_tab[slot];
-
- printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
deleted file mode 100644
index 517a8a9702f662..00000000000000
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI operations for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/pci.h>
-
-/*
- * The !gapspci_config_access case really shouldn't happen, ever, unless
- * someone implicitly messes around with the last devfn value.. otherwise we
- * only support a single device anyways, and if we didn't have a BBA, we
- * wouldn't make it terribly far through the PCI setup anyways.
- *
- * Also, we could very easily support both Type 0 and Type 1 configurations
- * here, but since it doesn't seem that there is any such implementation in
- * existence, we don't bother.
- *
- * I suppose if someone actually gets around to ripping the chip out of
- * the BBA and hanging some more devices off of it, then this might be
- * something to take into consideration. However, due to the cost of the BBA,
- * and the general lack of activity by DC hardware hackers, this doesn't seem
- * likely to happen anytime soon.
- */
-static int gapspci_config_access(unsigned char bus, unsigned int devfn)
-{
- return (bus == 0) && (devfn == 0);
-}
-
-/*
- * We can also actually read and write in b/w/l sizes! Thankfully this part
- * was at least done right, and we don't have to do the stupid masking and
- * shifting that we do on the 7751! Small wonders never cease to amaze.
- */
-static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
- *val = 0xffffffff;
-
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops gapspci_pci_ops = {
- .read = gapspci_read,
- .write = gapspci_write,
-};
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
deleted file mode 100644
index a205be3bfc4a67..00000000000000
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <asm/addrspace.h>
-#include "pci-sh4.h"
-
-/*
- * Direct access to PCI hardware...
- */
-#define CONFIG_CMD(bus, devfn, where) \
- (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- u32 data;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since SH4 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- int shift;
- u32 data;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- pci_write_reg(chan, data, SH4_PCIPDR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops sh4_pci_ops = {
- .read = sh4_pci_read,
- .write = sh4_pci_write,
-};
-
-int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
-{
- /* Nothing to do. */
- return 0;
-}
diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
deleted file mode 100644
index a10f9f4ebd7fe9..00000000000000
--- a/arch/sh/drivers/pci/ops-sh7786.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH7786 PCI-Express operations.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include "pcie-sh7786.h"
-
-enum {
- PCI_ACCESS_READ,
- PCI_ACCESS_WRITE,
-};
-
-static int sh7786_pcie_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
-{
- struct pci_channel *chan = bus->sysdata;
- int dev, func, type, reg;
-
- dev = PCI_SLOT(devfn);
- func = PCI_FUNC(devfn);
- type = !!bus->parent;
- reg = where & ~3;
-
- if (bus->number > 255 || dev > 31 || func > 7)
- return PCIBIOS_FUNC_NOT_SUPPORTED;
-
- /*
- * While each channel has its own memory-mapped extended config
- * space, it's generally only accessible when in endpoint mode.
- * When in root complex mode, the controller is unable to target
- * itself with either type 0 or type 1 accesses, and indeed, any
- * controller initiated target transfer to its own config space
- * result in a completer abort.
- *
- * Each channel effectively only supports a single device, but as
- * the same channel <-> device access works for any PCI_SLOT()
- * value, we cheat a bit here and bind the controller's config
- * space to devfn 0 in order to enable self-enumeration. In this
- * case the regular PAR/PDR path is sidelined and the mangled
- * config access itself is initiated as a SuperHyway transaction.
- */
- if (pci_is_root_bus(bus)) {
- if (dev == 0) {
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, PCI_REG(reg));
- else
- pci_write_reg(chan, *data, PCI_REG(reg));
-
- return PCIBIOS_SUCCESSFUL;
- } else if (dev > 1)
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- /* Clear errors */
- pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR);
-
- /* Set the PIO address */
- pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
- (func << 16) | reg, SH4A_PCIEPAR);
-
- /* Enable the configuration access */
- pci_write_reg(chan, (1 << 31) | (type << 8), SH4A_PCIEPCTLR);
-
- /* Check for errors */
- if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* Check for master and target aborts */
- if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, SH4A_PCIEPDR);
- else
- pci_write_reg(chan, *data, SH4A_PCIEPDR);
-
- /* Disable the configuration access */
- pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- int ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL) {
- *val = 0xffffffff;
- goto out;
- }
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- else
- *val = data;
-
- dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=0x%08lx\n", bus->number,
- devfn, where, size, (unsigned long)*val);
-
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- int shift, ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- goto out;
-
- dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=%08lx\n", bus->number,
- devfn, where, size, (unsigned long)val);
-
- if (size == 1) {
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- } else if (size == 2) {
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- } else
- data = val;
-
- ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
- devfn, where, &data);
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-struct pci_ops sh7786_pci_ops = {
- .read = sh7786_pcie_read,
- .write = sh7786_pcie_write,
-};
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
deleted file mode 100644
index 4cff2a8107bf06..00000000000000
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI support for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static struct resource gapspci_resources[] = {
- {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct pci_channel dreamcast_pci_controller = {
- .pci_ops = &gapspci_pci_ops,
- .resources = gapspci_resources,
- .nr_resources = ARRAY_SIZE(gapspci_resources),
- .io_offset = 0x00000000,
- .mem_offset = 0x00000000,
-};
-
-/*
- * gapspci init
- */
-
-static int __init gapspci_init(void)
-{
- char idbuf[16];
- int i;
-
- /*
- * FIXME: All of this wants documenting to some degree,
- * even some basic register definitions would be nice.
- *
- * I haven't seen anything this ugly since.. maple.
- */
-
- for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
-
- if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
- return -ENODEV;
-
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
- for (i=0; i<1000000; i++)
- cpu_relax();
-
- if (inl(GAPSPCI_REGS+0x18) != 1)
- return -EINVAL;
-
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
-
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
-
- /* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
- return register_pci_controller(&dreamcast_pci_controller);
-}
-arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
deleted file mode 100644
index 1543c50b65031c..00000000000000
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCI_SH4_H
-#define __PCI_SH4_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763)
-#include "pci-sh7780.h"
-#else
-#include "pci-sh7751.h"
-#endif
-
-#include <asm/io.h>
-
-#define SH4_PCICR 0x100 /* PCI Control Register */
- #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
- #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
- #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */
- #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */
- #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
- #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
- #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */
- #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */
- #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */
- #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */
- #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
-#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
-#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
-#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
-#define SH4_PCIINT 0x114 /* PCI Interrupt Register */
- #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */
- #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */
- #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */
- #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
- #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */
- #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */
- #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
- #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */
- #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
- #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
- #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
- #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
-#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
- #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
- #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
- #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
- #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
- #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
- #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
- #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
- #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
- #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
- #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
- #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
-#define SH4_PCIALR 0x11C /* Error Address Register */
-#define SH4_PCICLR 0x120 /* Error Command/Data */
- #define SH4_PCICLR_MPIO 0x80000000
- #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
- #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
- #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
- #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
- #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */
- #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
-#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
- #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
- #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
- #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
- #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
- #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
- #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */
-#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */
- #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
- #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
- #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
- #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
- #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
-#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
- #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
-#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */
-#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */
-#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */
-#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */
- #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
- #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
- #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
- #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
- #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */
- #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
- #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
- #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
- #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
- #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */
-#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */
-#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */
-#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */
-#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */
-#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */
-#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */
-#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */
-#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */
-#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */
-#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */
-#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */
-#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */
-#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
- #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
- #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
- #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
- #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
-#define SH4_PCIMBR 0x1C4 /* Memory Base Address */
- #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
- #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
-#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */
- #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
- #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
-#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
- #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
- #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
-#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
- #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
- #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
- #define SH4_PCIMBR0 SH4_PCIBCR1
-#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
- #define SH4_PCIMBMR0 SH4_PCIBCR2
-#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
-#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
-#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
- #define SH4_PCIMBR2 SH4_PCIWCR3
-#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
-#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */
-#define SH4_PCIPCTR 0x200 /* Port Control Register */
- #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
- #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
- #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
- #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
- #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
- #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
- #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
- #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
- #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
-#define SH4_PCIPDTR 0x204 /* Port Data Register */
- #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
- #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
- #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
- #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
- #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
- #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
-#define SH4_PCIPDR 0x220 /* Port IO Data Register */
-
-/* arch/sh/kernel/drivers/pci/ops-sh4.c */
-extern struct pci_ops sh4_pci_ops;
-int pci_fixup_pcic(struct pci_channel *chan);
-
-struct sh4_pci_address_space {
- unsigned long base;
- unsigned long size;
-};
-
-struct sh4_pci_address_map {
- struct sh4_pci_address_space window0;
- struct sh4_pci_address_space window1;
-};
-
-static inline void pci_write_reg(struct pci_channel *chan,
- unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long pci_read_reg(struct pci_channel *chan,
- unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
deleted file mode 100644
index 11ed21c2e9bb10..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7751
- *
- * Copyright (C) 2003 - 2009 Paul Mundt
- * Copyright (C) 2001 Dustin McIntire
- *
- * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include "pci-sh4.h"
-#include <asm/addrspace.h>
-#include <linux/sizes.h>
-
-static int __init __area_sdram_check(struct pci_channel *chan,
- unsigned int area)
-{
- unsigned long word;
-
- word = __raw_readl(SH7751_BCR1);
- /* check BCR for SDRAM in area */
- if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR1);
-
- word = __raw_readw(SH7751_BCR2);
- /* check BCR2 for 32bit SDRAM interface*/
- if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR2);
-
- return 1;
-}
-
-static struct resource sh7751_pci_resources[] = {
- {
- .name = "SH7751_IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO
- }, {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
- },
-};
-
-static struct pci_channel sh7751_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7751_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
- .mem_offset = 0x00000000,
- .io_offset = 0x00000000,
- .io_map_base = SH7751_PCI_IO_BASE,
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-};
-
-static int __init sh7751_pci_init(void)
-{
- struct pci_channel *chan = &sh7751_pci_controller;
- unsigned int id;
- u32 word, reg;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe200000;
-
- /* check for SH7751/SH7751R hardware */
- id = pci_read_reg(chan, SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- /* Set the BCR's to enable PCI access */
- reg = __raw_readl(SH7751_BCR1);
- reg |= 0x80000;
- __raw_writel(reg, SH7751_BCR1);
-
- /* Turn the clocks back on (not done in reset)*/
- pci_write_reg(chan, 0, SH4_PCICLKR);
- /* Clear Powerdown IRQ's (not done in reset) */
- word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(chan, word, SH4_PCIPINT);
-
- /* set the command/status bits to:
- * Wait Cycle Control + Parity Enable + Bus Master +
- * Mem space enable
- */
- word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
- SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(chan, word, SH7751_PCICONF1);
-
- /* define this host as the host bridge */
- word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(chan, word, SH7751_PCICONF2);
-
- /* Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
- */
- word = sh7751_pci_map.window0.size - 1;
- pci_write_reg(chan, word, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(sh7751_pci_map.window0.base);
- pci_write_reg(chan, word, SH4_PCILAR0);
- pci_write_reg(chan, word, SH7751_PCICONF5);
-
- /* Set the local 16MB PCI memory space window to
- * the lowest PCI mapped address
- */
- word = chan->resources[1].start & SH4_PCIMBR_MASK;
- pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(chan, word , SH4_PCIMBR);
-
- /* Make sure the MSB's of IO window are set to access PCI space
- * correctly */
- word = chan->resources[0].start & SH4_PCIIOBR_MASK;
- pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(chan, word, SH4_PCIIOBR);
-
- /* Set PCI WCRx, BCRx's, copy from BSC locations */
-
- /* check BCR for SDRAM in specified area */
- switch (sh7751_pci_map.window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
- }
-
- if (!word)
- return -1;
-
- /* configure the wait control registers */
- word = __raw_readl(SH7751_WCR1);
- pci_write_reg(chan, word, SH4_PCIWCR1);
- word = __raw_readl(SH7751_WCR2);
- pci_write_reg(chan, word, SH4_PCIWCR2);
- word = __raw_readl(SH7751_WCR3);
- pci_write_reg(chan, word, SH4_PCIWCR3);
- word = __raw_readl(SH7751_MCR);
- pci_write_reg(chan, word, SH4_PCIMCR);
-
- /* NOTE: I'm ignoring the PCI error IRQs for now..
- * TODO: add support for the internal error interrupts and
- * DMA interrupts...
- */
-
- pci_fixup_pcic(chan);
-
- /* SH7751 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(chan, word, SH4_PCICR);
-
- return register_pci_controller(chan);
-}
-arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
deleted file mode 100644
index d1951e50effc8b..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7751 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7751_H_
-#define _PCI_SH7751_H_
-
-/* Platform Specific Values */
-#define SH7751_VENDOR_ID 0x1054
-#define SH7751_DEVICE_ID 0x3505
-#define SH7751R_DEVICE_ID 0x350e
-
-/* SH7751 Specific Values */
-#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */
-#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
-#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */
-#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
-
-#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
-
-#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
- #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
- #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */
-#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */
- #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */
- #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */
- #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */
- #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */
- #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */
- #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */
- #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */
- #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */
- #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */
- #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */
- #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */
- #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */
- #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */
- #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */
- #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */
- #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */
- #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */
- #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */
- #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */
- #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */
- #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */
-#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */
- #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */
- #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
- #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
- #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
-#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
- #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
- #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
- #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
- #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */
- #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */
- #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */
- #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */
-#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */
- #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */
- #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */
- #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
- #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
-/* PCICONF7 - PCICONF10 are undefined */
-#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
- #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
- #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */
-/* PCICONF12 is undefined */
-#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */
- #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */
-/* PCICONF14 is undefined */
-#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */
- #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */
-#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */
- #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */
- #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */
- #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */
- #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */
- #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */
- #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */
- #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */
- #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */
-#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */
- #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */
- #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */
- #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */
- #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */
- #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
- #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
-/* SH7715 Internal PCI Registers */
-
-/* Memory Control Registers */
-#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
-#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */
-#define SH7751_BCR3 0xFF800050 /* Memory BCR3 Register */
-#define SH7751_BCR4 0xFE0A00F0 /* Memory BCR4 Register */
-#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */
-#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */
-#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */
-#define SH7751_MCR 0xFF800014 /* Memory Control Register */
-
-/* General Memory Config Addresses */
-#define SH7751_CS0_BASE_ADDR 0x0
-#define SH7751_MEM_REGION_SIZE 0x04000000
-#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-
-#endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
deleted file mode 100644
index 9a624a6ee35479..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7780
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/log2.h>
-#include "pci-sh4.h"
-#include <asm/mmu.h>
-#include <linux/sizes.h>
-
-#if defined(CONFIG_CPU_BIG_ENDIAN)
-# define PCICR_ENDIANNESS SH4_PCICR_BSWP
-#else
-# define PCICR_ENDIANNESS 0
-#endif
-
-
-static struct resource sh7785_pci_resources[] = {
- {
- .name = "PCI IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "PCI MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCI MEM 1",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /*
- * 32-bit only resources must be last.
- */
- .name = "PCI MEM 2",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
-};
-
-static struct pci_channel sh7780_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7785_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
- .io_offset = 0,
- .mem_offset = 0,
- .io_map_base = 0xfe200000,
- .serr_irq = evt2irq(0xa00),
- .err_irq = evt2irq(0xaa0),
-};
-
-struct pci_errors {
- unsigned int mask;
- const char *str;
-} pci_arbiter_errors[] = {
- { SH4_PCIAINT_MBKN, "master broken" },
- { SH4_PCIAINT_TBTO, "target bus time out" },
- { SH4_PCIAINT_MBTO, "master bus time out" },
- { SH4_PCIAINT_TABT, "target abort" },
- { SH4_PCIAINT_MABT, "master abort" },
- { SH4_PCIAINT_RDPE, "read data parity error" },
- { SH4_PCIAINT_WDPE, "write data parity error" },
-}, pci_interrupt_errors[] = {
- { SH4_PCIINT_MLCK, "master lock error" },
- { SH4_PCIINT_TABT, "target-target abort" },
- { SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable error" },
- { SH4_PCIINT_PRTY, "address parity error" },
- { SH4_PCIINT_SERR, "SERR" },
- { SH4_PCIINT_TWDP, "data parity error for target write" },
- { SH4_PCIINT_TRDP, "PERR detected for target read" },
- { SH4_PCIINT_MTABT, "target abort for master" },
- { SH4_PCIINT_MMABT, "master abort for master" },
- { SH4_PCIINT_MWPD, "master write data parity error" },
- { SH4_PCIINT_MRPD, "master read data parity error" },
-};
-
-static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
- unsigned long addr;
- unsigned int status;
- unsigned int cmd;
- int i;
-
- addr = __raw_readl(hose->reg_base + SH4_PCIALR);
-
- /*
- * Handle status errors.
- */
- status = __raw_readw(hose->reg_base + PCI_STATUS);
- if (status & (PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT)) {
- cmd = pcibios_handle_status_errors(addr, status, hose);
- if (likely(cmd))
- __raw_writew(cmd, hose->reg_base + PCI_STATUS);
- }
-
- /*
- * Handle arbiter errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIAINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
- if (status & pci_arbiter_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_arbiter_errors[i].str, addr);
- cmd |= pci_arbiter_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
-
- /*
- * Handle the remaining PCI errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
- if (status & pci_interrupt_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_interrupt_errors[i].str, addr);
- cmd |= pci_interrupt_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
-
- printk(KERN_DEBUG "PCI: system error received: ");
- pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
- pr_cont("\n");
-
- /* Deassert SERR */
- __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
-
- /* Back off the IRQ for awhile */
- disable_irq_nosync(irq);
- hose->serr_timer.expires = jiffies + HZ;
- add_timer(&hose->serr_timer);
-
- return IRQ_HANDLED;
-}
-
-static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
-{
- int ret;
-
- /* Clear out PCI arbiter IRQs */
- __raw_writel(0, hose->reg_base + SH4_PCIAINT);
-
- /* Clear all error conditions */
- __raw_writew(PCI_STATUS_DETECTED_PARITY | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_SIG_TARGET_ABORT | \
- PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
-
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
- "PCI SERR interrupt", hose);
- if (unlikely(ret)) {
- pr_err("PCI: Failed hooking SERR IRQ\n");
- return ret;
- }
-
- /*
- * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
- * down IRQ vectors are routed through the ERR IRQ vector. We
- * only request_irq() once as there is only a single masking
- * source for multiple events.
- */
- ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
- "PCI ERR interrupt", hose);
- if (unlikely(ret)) {
- free_irq(hose->serr_irq, hose);
- return ret;
- }
-
- /* Unmask all of the arbiter IRQs. */
- __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
- SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
- SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
-
- /* Unmask all of the PCI IRQs */
- __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
- SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
- SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
- SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
- SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
- SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
-
- return ret;
-}
-
-static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
-{
- free_irq(hose->err_irq, hose);
- free_irq(hose->serr_irq, hose);
-}
-
-static void __init sh7780_pci66_init(struct pci_channel *hose)
-{
- unsigned int tmp;
-
- if (!pci_is_66mhz_capable(hose, 0, 0))
- return;
-
- /* Enable register access */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-
- /* Enable 66MHz operation */
- tmp = __raw_readw(hose->reg_base + PCI_STATUS);
- tmp |= PCI_STATUS_66MHZ;
- __raw_writew(tmp, hose->reg_base + PCI_STATUS);
-
- /* Done */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-}
-
-static int __init sh7780_pci_init(void)
-{
- struct pci_channel *chan = &sh7780_pci_controller;
- phys_addr_t memphys;
- size_t memsize;
- unsigned int id;
- const char *type;
- int ret, i;
-
- pr_notice("PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe040000;
-
- /* Enable CPU access to the PCIC registers. */
- __raw_writel(PCIECR_ENBL, PCIECR);
-
- /* Reset */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- /*
- * Wait for it to come back up. The spec says to allow for up to
- * 1 second after toggling the reset pin, but in practice 100ms
- * is more than enough.
- */
- mdelay(100);
-
- id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
- if (id != PCI_VENDOR_ID_RENESAS) {
- pr_err("PCI: Unknown vendor ID 0x%04x.\n", id);
- return -ENODEV;
- }
-
- id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
- type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
- (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
- (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
- (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
- NULL;
- if (unlikely(!type)) {
- pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n",
- id);
- return -EINVAL;
- }
-
- pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n",
- type, __raw_readb(chan->reg_base + PCI_REVISION_ID));
-
- /*
- * Now throw it in to register initialization mode and
- * start the real work.
- */
- __raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- memphys = __pa(memory_start);
- memsize = roundup_pow_of_two(memory_end - memory_start);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LSR1.
- */
- if (memsize > SZ_512M) {
- __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
- __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- __raw_writel(0, chan->reg_base + SH4_PCILAR1);
- __raw_writel(0, chan->reg_base + SH4_PCILSR1);
- }
-
- /*
- * LAR0/LSR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
- __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR0);
-
- /*
- * Hook up the ERR and SERR IRQs.
- */
- ret = sh7780_pci_setup_irqs(chan);
- if (unlikely(ret))
- return ret;
-
- /*
- * Disable the cache snoop controller for non-coherent DMA.
- */
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
-
- /*
- * Setup the memory BARs
- */
- for (i = 1; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
-
- if (unlikely(res->flags & IORESOURCE_IO))
- continue;
-
- /*
- * Make sure we're in the right physical addressing mode
- * for dealing with the resource.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
- chan->nr_resources--;
- continue;
- }
-
- size = resource_size(res);
-
- /*
- * The MBMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
- chan->reg_base + SH7780_PCIMBMR(i - 1));
- __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
- }
-
- /*
- * And I/O.
- */
- __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
-
- __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
- PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
- PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
-
- /*
- * Initialization mode complete, release the control register and
- * enable round robin mode to stop device overruns/starvation.
- */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO |
- PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- ret = register_pci_controller(chan);
- if (unlikely(ret))
- goto err;
-
- sh7780_pci66_init(chan);
-
- pr_notice("PCI: Running at %dMHz.\n",
- (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ)
- ? 66 : 33);
-
- return 0;
-
-err:
- sh7780_pci_teardown_irqs(chan);
- return ret;
-}
-arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
deleted file mode 100644
index e2ac770f8e3502..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7780 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7780_H_
-#define _PCI_SH7780_H_
-
-/* SH7780 Control Registers */
-#define PCIECR 0xFE000008
-#define PCIECR_ENBL 0x01
-
-/* SH7780 Specific Values */
-#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
-
-#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
-
-/* SH7780 PCI Config Registers */
-#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
-#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
-#define SH7780_PCIAIR 0x11C /* Error Address Register */
-#define SH7780_PCICIR 0x120 /* Error Command/Data Register */
-#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */
-#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */
-#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */
-#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
-#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-
-#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8))
-#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8))
-#define SH7780_PCIIOBR 0x1F8
-#define SH7780_PCIIOBMR 0x1FC
-#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
-#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */
-#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
-#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
-
-#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
deleted file mode 100644
index a3903304f33faa..00000000000000
--- a/arch/sh/drivers/pci/pci.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * New-style PCI core.
- *
- * Copyright (c) 2004 - 2009 Paul Mundt
- * Copyright (c) 2002 M. R. Brown
- *
- * Modelled after arch/mips/pci/pci.c:
- * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-unsigned long PCIBIOS_MIN_IO = 0x0000;
-unsigned long PCIBIOS_MIN_MEM = 0;
-
-/*
- * The PCI controller list.
- */
-static struct pci_channel *hose_head, **hose_tail = &hose_head;
-
-static int pci_initialized;
-
-static void pcibios_scanbus(struct pci_channel *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct resource *res;
- resource_size_t offset;
- int i, ret;
- struct pci_host_bridge *bridge;
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- return;
-
- for (i = 0; i < hose->nr_resources; i++) {
- res = hose->resources + i;
- offset = 0;
- if (res->flags & IORESOURCE_DISABLED)
- continue;
- if (res->flags & IORESOURCE_IO)
- offset = hose->io_offset;
- else if (res->flags & IORESOURCE_MEM)
- offset = hose->mem_offset;
- pci_add_resource_offset(&resources, res, offset);
- }
-
- list_splice_init(&resources, &bridge->windows);
- bridge->dev.parent = NULL;
- bridge->sysdata = hose;
- bridge->busnr = next_busno;
- bridge->ops = hose->pci_ops;
- bridge->swizzle_irq = pci_common_swizzle;
- bridge->map_irq = pcibios_map_platform_irq;
-
- ret = pci_scan_root_bus_bridge(bridge);
- if (ret) {
- pci_free_host_bridge(bridge);
- return;
- }
-
- hose->bus = bridge->bus;
-
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
-
- next_busno = hose->bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- pci_bus_size_bridges(hose->bus);
- pci_bus_assign_resources(hose->bus);
- pci_bus_add_devices(hose->bus);
-}
-
-/*
- * This interrupt-safe spinlock protects all accesses to PCI
- * configuration space.
- */
-DEFINE_RAW_SPINLOCK(pci_config_lock);
-static DEFINE_MUTEX(pci_scan_mutex);
-
-int register_pci_controller(struct pci_channel *hose)
-{
- int i;
-
- for (i = 0; i < hose->nr_resources; i++) {
- struct resource *res = hose->resources + i;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- if (res->flags & IORESOURCE_IO) {
- if (request_resource(&ioport_resource, res) < 0)
- goto out;
- } else {
- if (request_resource(&iomem_resource, res) < 0)
- goto out;
- }
- }
-
- *hose_tail = hose;
- hose_tail = &hose->next;
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- pr_warn("registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Setup the ERR/PERR and SERR timers, if available.
- */
- pcibios_enable_timers(hose);
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return 0;
-
-out:
- for (--i; i >= 0; i--)
- release_resource(&hose->resources[i]);
-
- pr_warn("Skipping PCI bus scan due to resource conflict\n");
- return -1;
-}
-
-static int __init pcibios_init(void)
-{
- struct pci_channel *hose;
-
- /* Scan all of the recorded PCI controllers. */
- for (hose = hose_head; hose; hose = hose->next)
- pcibios_scanbus(hose);
-
- pci_initialized = 1;
-
- return 0;
-}
-subsys_initcall(pcibios_init);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_channel *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
- start = PCIBIOS_MIN_IO + hose->resources[0].start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400.
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- }
-
- return start;
-}
-
-static void __init
-pcibios_bus_report_status_early(struct pci_channel *hose,
- int top_bus, int current_bus,
- unsigned int status_mask, int warn)
-{
- unsigned int pci_devfn;
- u16 status;
- int ret;
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- ret = early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &status);
- if (ret != PCIBIOS_SUCCESSFUL)
- continue;
- if (status == 0xffff)
- continue;
-
- early_write_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS,
- status & status_mask);
- if (warn)
- pr_cont("(%02x:%02x: %04X) ", current_bus, pci_devfn,
- status);
- }
-}
-
-/*
- * We can't use pci_find_device() here since we are
- * called from interrupt context.
- */
-static void __ref
-pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
- int warn)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 status;
-
- /*
- * ignore host bridge - we handle
- * that separately
- */
- if (dev->bus->number == 0 && dev->devfn == 0)
- continue;
-
- pci_read_config_word(dev, PCI_STATUS, &status);
- if (status == 0xffff)
- continue;
-
- if ((status & status_mask) == 0)
- continue;
-
- /* clear the status errors */
- pci_write_config_word(dev, PCI_STATUS, status & status_mask);
-
- if (warn)
- pr_cont("(%s: %04X) ", pci_name(dev), status);
- }
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- if (dev->subordinate)
- pcibios_bus_report_status(dev->subordinate, status_mask, warn);
-}
-
-void __ref pcibios_report_status(unsigned int status_mask, int warn)
-{
- struct pci_channel *hose;
-
- for (hose = hose_head; hose; hose = hose->next) {
- if (unlikely(!hose->bus))
- pcibios_bus_report_status_early(hose, hose_head->index,
- hose->index, status_mask, warn);
- else
- pcibios_bus_report_status(hose->bus, status_mask, warn);
- }
-}
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *__pci_ioport_map(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
-{
- struct pci_channel *chan = dev->sysdata;
-
- if (unlikely(!chan->io_map_base)) {
- chan->io_map_base = sh_io_port_base;
-
- if (pci_domains_supported)
- panic("To avoid data corruption io_map_base MUST be "
- "set with multiple PCI domains.");
- }
-
- return (void __iomem *)(chan->io_map_base + port);
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
- iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
deleted file mode 100644
index b0c2a5238d0497..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ /dev/null
@@ -1,609 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Express Support for the SH7786
- *
- * Copyright (C) 2009 - 2011 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/async.h>
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/sh_intc.h>
-#include <cpu/sh7786.h>
-#include "pcie-sh7786.h"
-#include <linux/sizes.h>
-
-struct sh7786_pcie_port {
- struct pci_channel *hose;
- struct clk *fclk, phy_clk;
- unsigned int index;
- int endpoint;
- int link;
-};
-
-static struct sh7786_pcie_port *sh7786_pcie_ports;
-static unsigned int nr_ports;
-static unsigned long dma_pfn_offset;
-size_t memsize;
-u64 memstart;
-
-static struct sh7786_pcie_hwops {
- int (*core_init)(void);
- async_func_t port_init_hw;
-} *sh7786_pcie_hwops;
-
-static struct resource sh7786_pci0_resources[] = {
- {
- .name = "PCIe0 MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 MEM 1",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe0 MEM 2",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 IO",
- .start = 0xfe100000,
- .end = 0xfe100000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci1_resources[] = {
- {
- .name = "PCIe1 MEM 0",
- .start = 0xfd800000,
- .end = 0xfd800000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe1 MEM 1",
- .start = 0xa0000000,
- .end = 0xa0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 MEM 2",
- .start = 0x30000000,
- .end = 0x30000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 IO",
- .start = 0xfe300000,
- .end = 0xfe300000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci2_resources[] = {
- {
- .name = "PCIe2 MEM 0",
- .start = 0xfc800000,
- .end = 0xfc800000 + SZ_4M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe2 MEM 1",
- .start = 0x80000000,
- .end = 0x80000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 MEM 2",
- .start = 0x20000000,
- .end = 0x20000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 IO",
- .start = 0xfcd00000,
- .end = 0xfcd00000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-extern struct pci_ops sh7786_pci_ops;
-
-#define DEFINE_CONTROLLER(start, idx) \
-{ \
- .pci_ops = &sh7786_pci_ops, \
- .resources = sh7786_pci##idx##_resources, \
- .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
- .reg_base = start, \
- .mem_offset = 0, \
- .io_offset = 0, \
-}
-
-static struct pci_channel sh7786_pci_channels[] = {
- DEFINE_CONTROLLER(0xfe000000, 0),
- DEFINE_CONTROLLER(0xfe200000, 1),
- DEFINE_CONTROLLER(0xfcc00000, 2),
-};
-
-static struct clk fixed_pciexclkp = {
- .rate = 100000000, /* 100 MHz reference clock */
-};
-
-static void sh7786_pci_fixup(struct pci_dev *dev)
-{
- /*
- * Prevent enumeration of root complex resources.
- */
- if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
- int i;
-
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
- sh7786_pci_fixup);
-
-static int __init phy_wait_for_ack(struct pci_channel *chan)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
- unsigned int lane, unsigned int data)
-{
- unsigned long phyaddr;
-
- phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
- ((addr & 0xff) << BITS_ADR);
-
- /* Set write data */
- pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-
- /* Clear command */
- pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-}
-
-static int __init pcie_clk_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- struct clk *clk;
- char fclk_name[16];
- int ret;
-
- /*
- * First register the fixed clock
- */
- ret = clk_register(&fixed_pciexclkp);
- if (unlikely(ret != 0))
- return ret;
-
- /*
- * Grab the port's function clock, which the PHY clock depends
- * on. clock lookups don't help us much at this point, since no
- * dev_id is available this early. Lame.
- */
- snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
-
- port->fclk = clk_get(NULL, fclk_name);
- if (IS_ERR(port->fclk)) {
- ret = PTR_ERR(port->fclk);
- goto err_fclk;
- }
-
- clk_enable(port->fclk);
-
- /*
- * And now, set up the PHY clock
- */
- clk = &port->phy_clk;
-
- memset(clk, 0, sizeof(struct clk));
-
- clk->parent = &fixed_pciexclkp;
- clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
- clk->enable_bit = BITS_CKE;
-
- ret = sh_clk_mstp_register(clk, 1);
- if (unlikely(ret < 0))
- goto err_phy;
-
- return 0;
-
-err_phy:
- clk_disable(port->fclk);
- clk_put(port->fclk);
-err_fclk:
- clk_unregister(&fixed_pciexclkp);
-
- return ret;
-}
-
-static int __init phy_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int timeout = 100;
-
- clk_enable(&port->phy_clk);
-
- /* Initialize the phy */
- phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
- phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
- phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
- phy_write_reg(chan, 0x65, 0xf, 0x09070907);
- phy_write_reg(chan, 0x66, 0xf, 0x00000010);
- phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
- phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
- phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
-
- /* Deassert Standby */
- phy_write_reg(chan, 0x67, 0x1, 0x00000400);
-
- /* Disable clock */
- clk_disable(&port->phy_clk);
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYSR))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init pcie_reset(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
-
- pci_write_reg(chan, 1, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETCTLR);
- pci_write_reg(chan, 0, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
-}
-
-static int __init pcie_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int data;
- phys_addr_t memstart, memend;
- int ret, i, win;
-
- /* Begin initialization */
- pcie_reset(port);
-
- /*
- * Initial header for port config space is type 1, set the device
- * class to match. Hardware takes care of propagating the IDSETR
- * settings, so there is no need to bother with a quirk.
- */
- pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI_NORMAL << 8, SH4A_PCIEIDSETR1);
-
- /* Initialize default capabilities. */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
- data &= ~(PCI_EXP_FLAGS_TYPE << 16);
-
- if (port->endpoint)
- data |= PCI_EXP_TYPE_ENDPOINT << 20;
- else
- data |= PCI_EXP_TYPE_ROOT_PORT << 20;
-
- data |= PCI_CAP_ID_EXP;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
-
- /* Enable data link layer active state reporting */
- pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
-
- /* Enable extended sync and ASPM L0s support */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
- data &= ~PCI_EXP_LNKCTL_ASPMC;
- data |= PCI_EXP_LNKCTL_ES | 1;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
-
- /* Write out the physical slot number */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
- data &= ~PCI_EXP_SLTCAP_PSN;
- data |= (port->index + 1) << 19;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
-
- /* Set the completion timer timeout to the maximum 32ms. */
- data = pci_read_reg(chan, SH4A_PCIETLCTLR);
- data &= ~0x3f00;
- data |= 0x32 << 8;
- pci_write_reg(chan, data, SH4A_PCIETLCTLR);
-
- /*
- * Set fast training sequences to the maximum 255,
- * and enable MAC data scrambling.
- */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data &= ~PCIEMACCTLR_SCR_DIS;
- data |= (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- memstart = __pa(memory_start);
- memend = __pa(memory_end);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * The start address must be aligned on its size. So we round
- * it down, and then recalculate the size so that it covers
- * the entire memory.
- */
- memstart = ALIGN_DOWN(memstart, memsize);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LAMR1.
- */
- if (memsize > SZ_512M) {
- pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1);
- pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
- SH4A_PCIELAMR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- pci_write_reg(chan, 0, SH4A_PCIELAR1);
- pci_write_reg(chan, 0, SH4A_PCIELAMR1);
- }
-
- /*
- * LAR0/LAMR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- pci_write_reg(chan, memstart, SH4A_PCIELAR0);
- pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
-
- /* Finish initialization */
- data = pci_read_reg(chan, SH4A_PCIETCTLR);
- data |= 0x1;
- pci_write_reg(chan, data, SH4A_PCIETCTLR);
-
- /* Let things settle down a bit.. */
- mdelay(100);
-
- /* Enable DL_Active Interrupt generation */
- data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
- data |= PCIEDLINTENR_DLL_ACT_ENABLE;
- pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
-
- /* Disable MAC data scrambling. */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- /*
- * This will timeout if we don't have a link, but we permit the
- * port to register anyways in order to support hotplug on future
- * hardware.
- */
- ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
-
- data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
- data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
- data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
- pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
-
- pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
- pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
-
- wmb();
-
- if (ret == 0) {
- data = pci_read_reg(chan, SH4A_PCIEMACSR);
- printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
- port->index, (data >> 20) & 0x3f);
- } else
- printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
- port->index);
-
- for (i = win = 0; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
- u32 mask;
-
- /*
- * We can't use the 32-bit mode windows in legacy 29-bit
- * mode, so just skip them entirely.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
- res->flags |= IORESOURCE_DISABLED;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
-
- /*
- * The PAMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- size = resource_size(res);
- mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
- pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
-
- pci_write_reg(chan, upper_32_bits(res->start),
- SH4A_PCIEPARH(win));
- pci_write_reg(chan, lower_32_bits(res->start),
- SH4A_PCIEPARL(win));
-
- mask = MASK_PARE;
- if (res->flags & IORESOURCE_IO)
- mask |= MASK_SPC;
-
- pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
-
- win++;
- }
-
- return 0;
-}
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xae0);
-}
-
-void pcibios_bus_add_device(struct pci_dev *pdev)
-{
- dma_direct_set_offset(&pdev->dev, __pa(memory_start),
- __pa(memory_start) - memstart, memsize);
-}
-
-static int __init sh7786_pcie_core_init(void)
-{
- /* Return the number of ports */
- return test_mode_pin(MODE_PIN12) ? 3 : 2;
-}
-
-static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie)
-{
- struct sh7786_pcie_port *port = data;
- int ret;
-
- /*
- * Check if we are configured in endpoint or root complex mode,
- * this is a fixed pin setting that applies to all PCIe ports.
- */
- port->endpoint = test_mode_pin(MODE_PIN11);
-
- /*
- * Setup clocks, needed both for PHY and PCIe registers.
- */
- ret = pcie_clk_init(port);
- if (unlikely(ret < 0)) {
- pr_err("clock initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = phy_init(port);
- if (unlikely(ret < 0)) {
- pr_err("phy initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = pcie_init(port);
- if (unlikely(ret < 0)) {
- pr_err("core initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- /* In the interest of preserving device ordering, synchronize */
- async_synchronize_cookie(cookie);
-
- register_pci_controller(port->hose);
-}
-
-static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
- .core_init = sh7786_pcie_core_init,
- .port_init_hw = sh7786_pcie_init_hw,
-};
-
-static int __init sh7786_pcie_init(void)
-{
- struct clk *platclk;
- u32 mm_sel;
- int i;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
-
- nr_ports = sh7786_pcie_hwops->core_init();
- BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
-
- if (unlikely(nr_ports == 0))
- return -ENODEV;
-
- sh7786_pcie_ports = kcalloc(nr_ports, sizeof(struct sh7786_pcie_port),
- GFP_KERNEL);
- if (unlikely(!sh7786_pcie_ports))
- return -ENOMEM;
-
- /*
- * Fetch any optional platform clock associated with this block.
- *
- * This is a rather nasty hack for boards with spec-mocking FPGAs
- * that have a secondary set of clocks outside of the on-chip
- * ones that need to be accounted for before there is any chance
- * of touching the existing MSTP bits or CPG clocks.
- */
- platclk = clk_get(NULL, "pcie_plat_clk");
- if (IS_ERR(platclk)) {
- /* Sane hardware should probably get a WARN_ON.. */
- platclk = NULL;
- }
-
- clk_enable(platclk);
-
- mm_sel = sh7786_mm_sel();
-
- /*
- * Depending on the MMSELR register value, the PCIe0 MEM 1
- * area may not be available. See Table 13.11 of the SH7786
- * datasheet.
- */
- if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6)
- sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED;
-
- printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
-
- for (i = 0; i < nr_ports; i++) {
- struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
-
- port->index = i;
- port->hose = sh7786_pci_channels + i;
- port->hose->io_map_base = port->hose->resources[0].start;
-
- async_schedule(sh7786_pcie_hwops->port_init_hw, port);
- }
-
- async_synchronize_full();
-
- return 0;
-}
-arch_initcall(sh7786_pcie_init);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
deleted file mode 100644
index ffe383681a0bd2..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ /dev/null
@@ -1,577 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 PCI-Express controller definitions.
- *
- * Copyright (C) 2008, 2009 Renesas Technology Corp.
- * All rights reserved.
- */
-#ifndef __PCI_SH7786_H
-#define __PCI_SH7786_H
-
-/* PCIe bus-0(x4) on SH7786 */ // Rev1.171
-#define SH4A_PCIE_SPW_BASE 0xFE000000 /* spw config address for controller 0 */
-#define SH4A_PCIE_SPW_BASE1 0xFE200000 /* spw config address for controller 1 (Rev1.14)*/
-#define SH4A_PCIE_SPW_BASE2 0xFCC00000 /* spw config address for controller 2 (Rev1.171)*/
-#define SH4A_PCIE_SPW_BASE_LEN 0x00080000
-
-#define SH4A_PCI_CNFG_BASE 0xFE040000 /* pci config address for controller 0 */
-#define SH4A_PCI_CNFG_BASE1 0xFE240000 /* pci config address for controller 1 (Rev1.14)*/
-#define SH4A_PCI_CNFG_BASE2 0xFCC40000 /* pci config address for controller 2 (Rev1.171)*/
-#define SH4A_PCI_CNFG_BASE_LEN 0x00040000
-
-#define SH4A_PCIPIO_ADDR_OFFSET 0x000001c0 /* offset to pci config_address */
-#define SH4A_PCIPIO_DATA_OFFSET 0x00000220 /* offset to pci config_data */
-
-/*
- * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
- * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
- */
-
-/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
-#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
-
-/* SPVCR0 */
-#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
-#define BITS_TOP_MB (24)
-#define MASK_TOP_MB (0xff<<BITS_TOP_MB)
-#define BITS_BOT_MB (16)
-#define MASK_BOT_MB (0xff<<BITS_BOT_MB)
-#define BITS_VC_ID (0)
-#define MASK_VC_ID (0xffff<<BITS_VC_ID)
-
-/* SPVCR1 */
-#define SH4A_PCIEVCR1 (0x000004) /* R - 0x0000 0000 32*/
-#define BITS_BADOPC (5) /* 5 BADOPC 0 R/W */
-#define MASK_BADOPC (1<<BITS_BADOPC)
-#define BITS_BADDEST (4) /*4 BADDEST 0 R/W */
-#define MASK_BADDEST (1<<BITS_BADDEST)
-#define BITS_UNSOLRESP (3) /* 3 UNSOLRESP 0 R/W */
-#define MASK_UNSOLRESP (1<<BITS_UNSOLRESP)
-#define BITS_ERRSNT (1) /* 1 ERRSNT 0 */
-#define MASK_ERRSNT (1<<BITS_ERRSNT)
-#define BITS_ERRRCV (0) /* 0 ERRRCV 0 */
-#define MASK_ERRRCV (1<<BITS_ERRRCV)
-
-/* PCIEENBLR */
-#define SH4A_PCIEENBLR (0x000008) /* R/W - 0x0000 0001 32 */
-
-/* PCIEECR */
-#define SH4A_PCIEECR (0x00000C) /* R/W - 0x0000 0000 32 */
-#define BITS_ENBL (0) /* 0 ENBL 0 R/W */
-#define MASK_ENBL (1<<BITS_ENBL)
-
-/* PCIEPAR */
-#define SH4A_PCIEPAR (0x000010) /* R/W - 0x0000 0000 32 */
-#define BITS_BN (24)
-#define MASK_BN (0xff<<BITS_BN)
-#define BITS_DN (19)
-#define MASK_DN (0x1f<<BITS_DN)
-#define BITS_FN (16)
-#define MASK_FN (0x7<<BITS_FN)
-#define BITS_EREGNO (8)
-#define MASK_EREGNO (0xff<<BITS_EREGNO)
-#define BITS_REGNO (2)
-#define MASK_REGNO (0x3f<<BITS_REGNO)
-
-/* PCIEPCTLR */
-#define SH4A_PCIEPCTLR (0x000018) /* R/W - 0x0000 0000 32 */
-#define BITS_CCIE (31) /* 31 CCIE */
-#define MASK_CCIE (1<<BITS_CCIE)
-#define BITS_TYPE (8)
-#define MASK_TYPE (1<<BITS_TYPE)
-#define BITS_C_VC (0)
-#define MASK_C_VC (1<<BITS_C_VC)
-
-/* PCIEPDR */
-#define SH4A_PCIEPDR (0x000020) /* R/W - 0x0000 0000 32 */
-#define BITS_PDR (0)
-#define MASK_PDR (0xffffffff<<BITS_PDR)
-
-/* PCIEMSGALR */
-#define SH4A_PCIEMSGALR (0x000030) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRL (0)
-#define MASK_MSGADRL (0xffffffff<<BITS_MSGADRL)
-
-/* PCIEMSGAHR */
-#define SH4A_PCIEMSGAHR (0x000034) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRH (0)
-#define MASK_MSGADRH (0xffffffff<<BITS_MSGADRH)
-
-/* PCIEMSGCTLR */
-#define SH4A_PCIEMSGCTLR (0x000038) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGIE (31)
-#define MASK_MSGIE (1<<BITS_MSGIE)
-#define BITS_MROUTE (16)
-#define MASK_MROUTE (0x7<<BITS_MROUTE)
-#define BITS_MCODE (8)
-#define MASK_MCODE (0xff<<BITS_MCODE)
-#define BITS_M_VC (0)
-#define MASK_M_VC (1<<BITS_M_VC)
-
-/* PCIEMSG */
-#define SH4A_PCIEMSG (0x000040) /* W - - 32 */
-#define BITS_MDATA (0)
-#define MASK_MDATA (0xffffffff<<BITS_MDATA)
-
-/* PCIEUNLOCKCR */
-#define SH4A_PCIEUNLOCKCR (0x000048) /* R/W - 0x0000 0000 32 */
-
-/* PCIEIDR */
-#define SH4A_PCIEIDR (0x000060) /* R/W - 0x0101 1101 32 */
-
-/* PCIEDBGCTLR */
-#define SH4A_PCIEDBGCTLR (0x000100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEINTXR */
-#define SH4A_PCIEINTXR (0x004000) /* R/W - 0x0000 0000 32 */
-
-/* PCIERMSGR */
-#define SH4A_PCIERMSGR (0x004010) /* R/W - 0x0000 0000 32 */
-
-/* PCIERSTR */
-#define SH4A_PCIERSTR(x) (0x008000 + ((x) * 0x4)) /* R/W - 0x0000 0000 32 */
-
-/* PCIESRSTR */
-#define SH4A_PCIESRSTR (0x008040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYCTLR */
-#define SH4A_PCIEPHYCTLR (0x010000) /* R/W - 0x0000 0000 32 */
-#define BITS_CKE (0)
-#define MASK_CKE (1<<BITS_CKE)
-
-/* PCIERMSGIER */
-#define SH4A_PCIERMSGIER (0x004040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYADRR */
-#define SH4A_PCIEPHYADRR (0x010004) /* R/W - 0x0000 0000 32 */
-#define BITS_ACK (24) // Rev1.171
-#define MASK_ACK (1<<BITS_ACK) // Rev1.171
-#define BITS_CMD (16) // Rev1.171
-#define MASK_CMD (0x03<<BITS_CMD) // Rev1.171
-#define BITS_LANE (8)
-#define MASK_LANE (0x0f<<BITS_LANE)
-#define BITS_ADR (0)
-#define MASK_ADR (0xff<<BITS_ADR)
-
-/* PCIEPHYDINR */ // Rev1.171 start.
-#define SH4A_PCIEPHYDINR (0x010008) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYDOUTR */
-#define SH4A_PCIEPHYDOUTR (0x01000C) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYSR */
-#define SH4A_PCIEPHYSR (0x010010) /* R/W - 0x0000 0000 32 */ // Rev1.171 end.
-
-/* PCIEPHYDATAR */
-#define SH4A_PCIEPHYDATAR (0x00008) /* R/W - 0xxxxx xxxx 32 */
-#define BITS_DATA (0)
-#define MASK_DATA (0xffffffff<<BITS_DATA)
-
-/* PCIETCTLR */
-#define SH4A_PCIETCTLR (0x020000) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CFINT (0)
-#define MASK_CFINT (1<<BITS_CFINT)
-
-/* PCIETSTR */
-#define SH4A_PCIETSTR (0x020004) /* R 0x0000 0000 32 */
-
-/* PCIEINTR */
-#define SH4A_PCIEINTR (0x020008) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEINTER */
-#define SH4A_PCIEINTER (0x02000C) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEEH0R */
-#define SH4A_PCIEEHR(x) (0x020010 + ((x) * 0x4)) /* R - 0x0000 0000 32 */
-
-/* PCIEAIR */
-#define SH4A_PCIEAIR (SH4A_PCIE_BASE + 0x020010) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIECIR */
-#define SH4A_PCIECIR (SH4A_PCIE_BASE) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIEERRFR */ // Rev1.18
-#define SH4A_PCIEERRFR (0x020020) /* R/W R/W 0xxxxx xxxx 32 */ // Rev1.18
-
-/* PCIEERRFER */
-#define SH4A_PCIEERRFER (0x020024) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEERRFR2 */
-#define SH4A_PCIEERRFR2 (0x020028) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEMSIR */
-#define SH4A_PCIEMSIR (0x020040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEMSIFR */
-#define SH4A_PCIEMSIFR (0x020044) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPWRCTLR */
-#define SH4A_PCIEPWRCTLR (0x020100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPCCTLR */
-#define SH4A_PCIEPCCTLR (0x020180) /* R/W - 0x0000 0000 32 */
-
- // Rev1.18
-/* PCIELAR0 */
-#define SH4A_PCIELAR0 (0x020200) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LARn (20)
-#define MASK_LARn (0xfff<<BITS_LARn)
-
-#define SH4A_PCIE_020204 (0x020204) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIELAMR0 */
-#define SH4A_PCIELAMR0 (0x020208) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LAMRn (20)
-#define MASK_LAMRn (0x1ff<<BITS_LAMRn)
-#define BITS_LAREn (0)
-#define MASK_LAREn (0x1<<BITS_LAREn)
-
-/* PCIECSCR0 */
-#define SH4A_PCIECSCR0 (0x020210) /* R/W R/W 0x0000 0000 32 */
-#define BITS_RANGE (2)
-#define MASK_RANGE (0x7<<BITS_RANGE)
-#define BITS_SNPMD (0)
-#define MASK_SNPMD (0x3<<BITS_SNPMD)
-
-/* PCIECSAR0 */
-#define SH4A_PCIECSAR0 (0x020214) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CSADR (0)
-#define MASK_CSADR (0xffffffff<<BITS_CSADR)
-
-/* PCIESTCTLR0 */
-#define SH4A_PCIESTCTLR0 (0x020218) /* R/W R/W 0x0000 0000 32 */
-#define BITS_SHPRI (8)
-#define MASK_SHPRI (0x0f<<BITS_SHPRI)
-
-#define SH4A_PCIE_020224 (0x020224) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR1 (0x020220) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR1 (0x020228) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR1 (0x020230) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR1 (0x020234) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR1 (0x020238) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR2 (0x020240) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020244 (0x020244) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR2 (0x020248) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR2 (0x020250) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR2 (0x020254) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR2 (0x020258) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR3 (0x020260) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020264 (0x020264) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR3 (0x020268) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR3 (0x020270) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR3 (0x020274) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR3 (0x020278) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR4 (0x020280) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020284 (0x020284) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR4 (0x020288) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR4 (0x020290) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR4 (0x020294) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR4 (0x020298) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR5 (0x0202A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_0202A4 (0x0202A4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR5 (0x0202A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR5 (0x0202B0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPARL */
-#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAL (18)
-#define MASK_PAL (0x3fff<<BITS_PAL)
-
-/* PCIEPARH */
-#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAH (0)
-#define MASK_PAH (0xffffffff<<BITS_PAH)
-
-/* PCIEPAMR */
-#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAM (18)
-#define MASK_PAM (0x3fff<<BITS_PAM)
-
-/* PCIEPTCTLR */
-#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20))
-#define BITS_PARE (31)
-#define MASK_PARE (0x1<<BITS_PARE)
-#define BITS_TC (20)
-#define MASK_TC (0x7<<BITS_TC)
-#define BITS_T_VC (16)
-#define MASK_T_VC (0x1<<BITS_T_VC)
-#define BITS_LOCK (12)
-#define MASK_LOCK (0x1<<BITS_LOCK)
-#define BITS_SPC (8)
-#define MASK_SPC (0x1<<BITS_SPC)
-
-#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR0 (0x021108) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR0 (0x02110C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR0 (0x021110) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR0 (0x021114) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR0 (0x021118) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR0 (0x02111C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR0 (0x021120) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R0 (0x021124) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR0 (0x021128) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR0 (0x02112C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR1 (0x021140) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR1 (0x021144) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR1 (0x021148) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR1 (0x02114C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR1 (0x021150) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR1 (0x021154) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR1 (0x021158) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR1 (0x02115C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR1 (0x021160) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R1 (0x021164) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR1 (0x021168) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR1 (0x02116C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR2 (0x021180) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR2 (0x021184) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR2 (0x021188) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR2 (0x02118C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR2 (0x021190) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR2 (0x021194) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR2 (0x021198) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR2 (0x02119C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR2 (0x0211A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R2 (0x0211A4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR2 (0x0211A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR3 (0x0211C0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR3 (0x0211C4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR3 (0x0211C8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR3 (0x0211CC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR3 (0x0211D0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR3 (0x0211D4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR3 (0x0211D8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR3 (0x0211DC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR3 (0x0211E0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R3 (0x0211E4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR3 (0x0211E8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR3 (0x0211EC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPCICONF0 (0x040000) /* R R - 8/16/32 */
-#define SH4A_PCIEPCICONF1 (0x040004) /* R/W R/W 0x0008 0000 8/16/32 */
-#define SH4A_PCIEPCICONF2 (0x040008) /* R/W R/W 0xFF00 0000 8/16/32 */
-#define SH4A_PCIEPCICONF3 (0x04000C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF4 (0x040010) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF5 (0x040014) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF6 (0x040018) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF7 (0x04001C) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF8 (0x040020) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF9 (0x040024) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF10 (0x040028) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF11 (0x04002C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF12 (0x040030) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF13 (0x040034) /* R/W R/W 0x0000 0040 8/16/32 */
-#define SH4A_PCIEPCICONF14 (0x040038) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF15 (0x04003C) /* R/W R/W 0x0000 00FF 8/16/32 */
-#define SH4A_PCIEPMCAP0 (0x040040) /* R/W R 0x0003 5001 8/16/32 */
-#define SH4A_PCIEPMCAP1 (0x040044) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP0 (0x040050) /* R/W R/W 0x0180 7005 8/16/32 */
-#define SH4A_PCIEMSICAP1 (0x040054) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP2 (0x040058) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP3 (0x04005C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP4 (0x040060) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP5 (0x040064) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP0 (0x040070) /* R/W R/W 0x0001 0010 8/16/32 */
-#define SH4A_PCIEEXPCAP1 (0x040074) /* R/W R 0x0000 0005 8/16/32 */
-#define SH4A_PCIEEXPCAP2 (0x040078) /* R/W R/W 0x0000 0801 8/16/32 */
-#define SH4A_PCIEEXPCAP3 (0x04007C) /* R/W R 0x0003 F421 8/16/32 */
-#define SH4A_PCIEEXPCAP4 (0x040080) /* R/W R/W 0x0041 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP5 (0x040084) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP6 (0x040088) /* R/W R/W 0x0000 03C0 8/16/32 */
-#define SH4A_PCIEEXPCAP7 (0x04008C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP8 (0x040090) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP0 (0x040100) /* R/W R 0x1B01 0002 8/16/32 */
-#define SH4A_PCIEVCCAP1 (0x040104) /* R R 0x0000 0001 8/16/32 */
-#define SH4A_PCIEVCCAP2 (0x040108) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP3 (0x04010C) /* R R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP4 (0x040110) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP5 (0x040114) /* R/W R/W 0x8000 00FF 8/16/32 */
-#define SH4A_PCIEVCCAP6 (0x040118) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIEVCCAP7 (0x04011C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP8 (0x040120) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP9 (0x040124) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIENUMCAP0 (0x0001B0) /* RW R 0x0001 0003 8/16/32 */
-#define SH4A_PCIENUMCAP1 (0x0001B4) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIENUMCAP2 (0x0001B8) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEIDSETR0 (0x041000) /* R/W R 0x0000 FFFF 16/32 */
-#define SH4A_PCIEIDSETR1 (0x041004) /* R/W R 0xFF00 0000 16/32 */
-#define SH4A_PCIEBAR0SETR (0x041008) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR1SETR (0x04100C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR2SETR (0x041010) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR3SETR (0x041014) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR4SETR (0x041018) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR5SETR (0x04101C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECISSETR (0x041020) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEIDSETR2 (0x041024) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEEROMSETR (0x041028) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR0 (0x04102C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR1 (0x041030) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECTLR (0x041040) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLSR (0x041044) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIETLCTLR (0x041048) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLSR (0x04104C) /* R/W1C R 0x4003 0000 16/32 */
-#define SH4A_PCIEDLCTLR (0x041050) /* R R 0x0000 0000 16/32 */
-#define SH4A_PCIEMACSR (0x041054) /* R/W1C R 0x0041 0000 16/32 */
-#define SH4A_PCIEMACCTLR (0x041058) /* R/W R 0x0000 0000 16/32 */
-#define PCIEMACCTLR_SCR_DIS (1 << 27) /* scramble disable */
-#define SH4A_PCIEPMSTR (0x04105C) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMCTLR (0x041060) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLINTENR (0x041064) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLINTENR (0x041068) /* R/W R 0x0000 0000 16/32 */
-#define PCIEDLINTENR_DLL_ACT_ENABLE (1 << 31) /* DL active irq */
-#define SH4A_PCIEMACINTENR (0x04106C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMINTENR (0x041070) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETXDCTLR (0x044000) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXCTLR (0x044020) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXSR (0x044028) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0DCTLR (0x044100) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0SR (0x044108) /* R/W - H'00888000_00000000 32/64 */
-#define SH4A_PCIEVC0PDTXR (0x044110) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHTXR (0x044118) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDTXR (0x044120) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHTXR (0x044128) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDTXR (0x044130) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHTXR (0x044138) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXDCTLR (0x044200) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXSR (0x044208) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDTXR (0x044210) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHTXR (0x044218) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDTXR (0x044220) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHTXR (0x044228) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDTXR (0x044230) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHTXR (0x044238) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIERDCTLR (0x046000) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPCTLR (0x046008) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPHR (0x046010) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPERR (0x046018) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0DCTLR (0x046100) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0SR (0x046108) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PDRXR (0x046140) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHRXR (0x046148) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PERR (0x046150) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDRXR (0x046158) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHRXR (0x046160) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPERR (0x046168) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDRXR (0x046170) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHRXR (0x046178) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CERR (0x046180) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXDCTLR (0x046200) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXSR (0x046208) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDRXR (0x046240) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHRXR (0x046248) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPERR (0x046250) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDRXR (0x046258) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHRXR (0x046260) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPERR (0x046268) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDRXR (0x046270) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHRXR (0x046278) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCERR (0x046280) /* R H'00000000_00000000 32/64 */
-
-/* SSI Register Definition for MSI WORK AROUND --hamada */
-#define SH4A_PCI_SSI_BASE 0xFFE00000 /* spw config address */
-#define SH4A_PCI_SSI_BASE_LEN 0x00100000 /* 1MB */
-
-#define SH4A_SSICR0 (0x000000)
-#define SH4A_SSICR1 (0x010000)
-#define SH4A_SSICR2 (0x020000)
-#define SH4A_SSICR3 (0x030000)
-
-#define PCI_REG(x) ((x) + 0x40000)
-
-static inline void
-pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long
-pci_read_reg(struct pci_channel *chan, unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH7786_H */
diff --git a/arch/sh/drivers/platform_early.c b/arch/sh/drivers/platform_early.c
deleted file mode 100644
index 143747c45206fe..00000000000000
--- a/arch/sh/drivers/platform_early.c
+++ /dev/null
@@ -1,340 +0,0 @@
-// SPDX--License-Identifier: GPL-2.0
-
-#include <asm/platform_early.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pm.h>
-
-static __initdata LIST_HEAD(sh_early_platform_driver_list);
-static __initdata LIST_HEAD(sh_early_platform_device_list);
-
-static const struct platform_device_id *
-platform_match_id(const struct platform_device_id *id,
- struct platform_device *pdev)
-{
- while (id->name[0]) {
- if (strcmp(pdev->name, id->name) == 0) {
- pdev->id_entry = id;
- return id;
- }
- id++;
- }
- return NULL;
-}
-
-static int platform_match(struct device *dev, struct device_driver *drv)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct platform_driver *pdrv = to_platform_driver(drv);
-
- /* When driver_override is set, only bind to the matching driver */
- if (pdev->driver_override)
- return !strcmp(pdev->driver_override, drv->name);
-
- /* Then try to match against the id table */
- if (pdrv->id_table)
- return platform_match_id(pdrv->id_table, pdev) != NULL;
-
- /* fall-back to driver name match */
- return (strcmp(pdev->name, drv->name) == 0);
-}
-
-#ifdef CONFIG_PM
-static void device_pm_init_common(struct device *dev)
-{
- if (!dev->power.early_init) {
- spin_lock_init(&dev->power.lock);
- dev->power.qos = NULL;
- dev->power.early_init = true;
- }
-}
-
-static void pm_runtime_early_init(struct device *dev)
-{
- dev->power.disable_depth = 1;
- device_pm_init_common(dev);
-}
-#else
-static void pm_runtime_early_init(struct device *dev) {}
-#endif
-
-/**
- * sh_early_platform_driver_register - register early platform driver
- * @epdrv: sh_early_platform driver structure
- * @buf: string passed from early_param()
- *
- * Helper function for sh_early_platform_init() / sh_early_platform_init_buffer()
- */
-int __init sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf)
-{
- char *tmp;
- int n;
-
- /* Simply add the driver to the end of the global list.
- * Drivers will by default be put on the list in compiled-in order.
- */
- if (!epdrv->list.next) {
- INIT_LIST_HEAD(&epdrv->list);
- list_add_tail(&epdrv->list, &sh_early_platform_driver_list);
- }
-
- /* If the user has specified device then make sure the driver
- * gets prioritized. The driver of the last device specified on
- * command line will be put first on the list.
- */
- n = strlen(epdrv->pdrv->driver.name);
- if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
- list_move(&epdrv->list, &sh_early_platform_driver_list);
-
- /* Allow passing parameters after device name */
- if (buf[n] == '\0' || buf[n] == ',')
- epdrv->requested_id = -1;
- else {
- epdrv->requested_id = simple_strtoul(&buf[n + 1],
- &tmp, 10);
-
- if (buf[n] != '.' || (tmp == &buf[n + 1])) {
- epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
- n = 0;
- } else
- n += strcspn(&buf[n + 1], ",") + 1;
- }
-
- if (buf[n] == ',')
- n++;
-
- if (epdrv->bufsize) {
- memcpy(epdrv->buffer, &buf[n],
- min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1));
- epdrv->buffer[epdrv->bufsize - 1] = '\0';
- }
- }
-
- return 0;
-}
-
-/**
- * sh_early_platform_add_devices - adds a number of early platform devices
- * @devs: array of early platform devices to add
- * @num: number of early platform devices in array
- *
- * Used by early architecture code to register early platform devices and
- * their platform data.
- */
-void __init sh_early_platform_add_devices(struct platform_device **devs, int num)
-{
- struct device *dev;
- int i;
-
- /* simply add the devices to list */
- for (i = 0; i < num; i++) {
- dev = &devs[i]->dev;
-
- if (!dev->devres_head.next) {
- pm_runtime_early_init(dev);
- INIT_LIST_HEAD(&dev->devres_head);
- list_add_tail(&dev->devres_head,
- &sh_early_platform_device_list);
- }
- }
-}
-
-/**
- * sh_early_platform_driver_register_all - register early platform drivers
- * @class_str: string to identify early platform driver class
- *
- * Used by architecture code to register all early platform drivers
- * for a certain class. If omitted then only early platform drivers
- * with matching kernel command line class parameters will be registered.
- */
-void __init sh_early_platform_driver_register_all(char *class_str)
-{
- /* The "class_str" parameter may or may not be present on the kernel
- * command line. If it is present then there may be more than one
- * matching parameter.
- *
- * Since we register our early platform drivers using early_param()
- * we need to make sure that they also get registered in the case
- * when the parameter is missing from the kernel command line.
- *
- * We use parse_early_options() to make sure the early_param() gets
- * called at least once. The early_param() may be called more than
- * once since the name of the preferred device may be specified on
- * the kernel command line. sh_early_platform_driver_register() handles
- * this case for us.
- */
- parse_early_options(class_str);
-}
-
-/**
- * sh_early_platform_match - find early platform device matching driver
- * @epdrv: early platform driver structure
- * @id: id to match against
- */
-static struct platform_device * __init
-sh_early_platform_match(struct sh_early_platform_driver *epdrv, int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id == id)
- return pd;
-
- return NULL;
-}
-
-/**
- * sh_early_platform_left - check if early platform driver has matching devices
- * @epdrv: early platform driver structure
- * @id: return true if id or above exists
- */
-static int __init sh_early_platform_left(struct sh_early_platform_driver *epdrv,
- int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id >= id)
- return 1;
-
- return 0;
-}
-
-/**
- * sh_early_platform_driver_probe_id - probe drivers matching class_str and id
- * @class_str: string to identify early platform driver class
- * @id: id to match against
- * @nr_probe: number of platform devices to successfully probe before exiting
- */
-static int __init sh_early_platform_driver_probe_id(char *class_str,
- int id,
- int nr_probe)
-{
- struct sh_early_platform_driver *epdrv;
- struct platform_device *match;
- int match_id;
- int n = 0;
- int left = 0;
-
- list_for_each_entry(epdrv, &sh_early_platform_driver_list, list) {
- /* only use drivers matching our class_str */
- if (strcmp(class_str, epdrv->class_str))
- continue;
-
- if (id == -2) {
- match_id = epdrv->requested_id;
- left = 1;
-
- } else {
- match_id = id;
- left += sh_early_platform_left(epdrv, id);
-
- /* skip requested id */
- switch (epdrv->requested_id) {
- case EARLY_PLATFORM_ID_ERROR:
- case EARLY_PLATFORM_ID_UNSET:
- break;
- default:
- if (epdrv->requested_id == id)
- match_id = EARLY_PLATFORM_ID_UNSET;
- }
- }
-
- switch (match_id) {
- case EARLY_PLATFORM_ID_ERROR:
- pr_warn("%s: unable to parse %s parameter\n",
- class_str, epdrv->pdrv->driver.name);
- fallthrough;
- case EARLY_PLATFORM_ID_UNSET:
- match = NULL;
- break;
- default:
- match = sh_early_platform_match(epdrv, match_id);
- }
-
- if (match) {
- /*
- * Set up a sensible init_name to enable
- * dev_name() and others to be used before the
- * rest of the driver core is initialized.
- */
- if (!match->dev.init_name && slab_is_available()) {
- if (match->id != -1)
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s.%d",
- match->name,
- match->id);
- else
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s",
- match->name);
-
- if (!match->dev.init_name)
- return -ENOMEM;
- }
-
- if (epdrv->pdrv->probe(match))
- pr_warn("%s: unable to probe %s early.\n",
- class_str, match->name);
- else
- n++;
- }
-
- if (n >= nr_probe)
- break;
- }
-
- if (left)
- return n;
- else
- return -ENODEV;
-}
-
-/**
- * sh_early_platform_driver_probe - probe a class of registered drivers
- * @class_str: string to identify early platform driver class
- * @nr_probe: number of platform devices to successfully probe before exiting
- * @user_only: only probe user specified early platform devices
- *
- * Used by architecture code to probe registered early platform drivers
- * within a certain class. For probe to happen a registered early platform
- * device matching a registered early platform driver is needed.
- */
-int __init sh_early_platform_driver_probe(char *class_str,
- int nr_probe,
- int user_only)
-{
- int k, n, i;
-
- n = 0;
- for (i = -2; n < nr_probe; i++) {
- k = sh_early_platform_driver_probe_id(class_str, i, nr_probe - n);
-
- if (k < 0)
- break;
-
- n += k;
-
- if (user_only)
- break;
- }
-
- return n;
-}
-
-/**
- * early_platform_cleanup - clean up early platform code
- */
-void __init early_platform_cleanup(void)
-{
- struct platform_device *pd, *pd2;
-
- /* clean up the devres list used to chain devices */
- list_for_each_entry_safe(pd, pd2, &sh_early_platform_device_list,
- dev.devres_head) {
- list_del(&pd->dev.devres_head);
- memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
- }
-}
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
deleted file mode 100644
index c95f48ff3f6fb4..00000000000000
--- a/arch/sh/drivers/push-switch.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic push-switch framework
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/push-switch.h>
-
-#define DRV_NAME "push-switch"
-#define DRV_VERSION "0.1.1"
-
-static ssize_t switch_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct push_switch_platform_info *psw_info = dev->platform_data;
- return sprintf(buf, "%s\n", psw_info->name);
-}
-static DEVICE_ATTR_RO(switch);
-
-static void switch_timer(struct timer_list *t)
-{
- struct push_switch *psw = from_timer(psw, t, debounce);
-
- schedule_work(&psw->work);
-}
-
-static void switch_work_handler(struct work_struct *work)
-{
- struct push_switch *psw = container_of(work, struct push_switch, work);
- struct platform_device *pdev = psw->pdev;
-
- psw->state = 0;
-
- kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE);
-}
-
-static int switch_drv_probe(struct platform_device *pdev)
-{
- struct push_switch_platform_info *psw_info;
- struct push_switch *psw;
- int ret, irq;
-
- psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL);
- if (unlikely(!psw))
- return -ENOMEM;
-
- irq = platform_get_irq(pdev, 0);
- if (unlikely(irq < 0)) {
- ret = -ENODEV;
- goto err;
- }
-
- psw_info = pdev->dev.platform_data;
- BUG_ON(!psw_info);
-
- ret = request_irq(irq, psw_info->irq_handler,
- psw_info->irq_flags,
- psw_info->name ? psw_info->name : DRV_NAME, pdev);
- if (unlikely(ret < 0))
- goto err;
-
- if (psw_info->name) {
- ret = device_create_file(&pdev->dev, &dev_attr_switch);
- if (unlikely(ret)) {
- dev_err(&pdev->dev, "Failed creating device attrs\n");
- ret = -EINVAL;
- goto err_irq;
- }
- }
-
- INIT_WORK(&psw->work, switch_work_handler);
- timer_setup(&psw->debounce, switch_timer, 0);
-
- /* Workqueue API brain-damage */
- psw->pdev = pdev;
-
- platform_set_drvdata(pdev, psw);
-
- return 0;
-
-err_irq:
- free_irq(irq, pdev);
-err:
- kfree(psw);
- return ret;
-}
-
-static int switch_drv_remove(struct platform_device *pdev)
-{
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- int irq = platform_get_irq(pdev, 0);
-
- if (psw_info->name)
- device_remove_file(&pdev->dev, &dev_attr_switch);
-
- platform_set_drvdata(pdev, NULL);
- flush_work(&psw->work);
- timer_shutdown_sync(&psw->debounce);
- free_irq(irq, pdev);
-
- kfree(psw);
-
- return 0;
-}
-
-static struct platform_driver switch_driver = {
- .probe = switch_drv_probe,
- .remove = switch_drv_remove,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-static int __init switch_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&switch_driver);
-}
-
-static void __exit switch_exit(void)
-{
- platform_driver_unregister(&switch_driver);
-}
-module_init(switch_init);
-module_exit(switch_exit);
-
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
deleted file mode 100644
index aa6e3267c055d9..00000000000000
--- a/arch/sh/drivers/superhyway/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperHyway specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o
-
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
deleted file mode 100644
index 490142274e3b0a..00000000000000
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/superhyway/ops-sh4-202.c
- *
- * SuperHyway bus support for SH4-202
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000)
-#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000)
-#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000)
-#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000)
-
-#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000)
-#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000)
-#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000)
-
-static struct resource emi_resources[] = {
- [0] = {
- .start = PHYS_EMI_CBLOCK,
- .end = PHYS_EMI_CBLOCK + 0x00300000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EMI_DBLOCK,
- .end = PHYS_EMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device emi_device = {
- .name = "emi",
- .num_resources = ARRAY_SIZE(emi_resources),
- .resource = emi_resources,
-};
-
-static struct resource femi_resources[] = {
- [0] = {
- .start = PHYS_FEMI_CBLOCK,
- .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_FEMI_DBLOCK,
- .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device femi_device = {
- .name = "femi",
- .num_resources = ARRAY_SIZE(femi_resources),
- .resource = femi_resources,
-};
-
-static struct resource epbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1e7ffff8),
- .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EPBR_BLOCK,
- .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device epbr_device = {
- .name = "epbr",
- .num_resources = ARRAY_SIZE(epbr_resources),
- .resource = epbr_resources,
-};
-
-static struct resource dmac_resource = {
- .start = PHYS_DMAC_BLOCK,
- .end = PHYS_DMAC_BLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct superhyway_device dmac_device = {
- .name = "dmac",
- .num_resources = 1,
- .resource = &dmac_resource,
-};
-
-static struct resource pbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1ffffff8),
- .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_PBR_BLOCK,
- .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device pbr_device = {
- .name = "pbr",
- .num_resources = ARRAY_SIZE(pbr_resources),
- .resource = pbr_resources,
-};
-
-static struct superhyway_device *sh4202_devices[] __initdata = {
- &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
-};
-
-static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
-{
- u32 vcrh, vcrl;
- u64 tmp;
-
- /*
- * XXX: Even though the SH4-202 Evaluation Device documentation
- * indicates that VCRL is mapped first with VCRH at a + 0x04
- * offset, the opposite seems to be true.
- *
- * Some modules (PBR and ePBR for instance) also appear to have
- * VCRL/VCRH flipped in the documentation, but on the SH4-202
- * itself it appears that these are all consistently mapped with
- * VCRH preceding VCRL.
- *
- * Do not trust the documentation, for it is evil.
- */
- vcrh = __raw_readl(base);
- vcrl = __raw_readl(base + sizeof(u32));
-
- tmp = ((u64)vcrh << 32) | vcrl;
- memcpy(vcr, &tmp, sizeof(u64));
-
- return 0;
-}
-
-static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
-{
- u64 tmp = *(u64 *)&vcr;
-
- __raw_writel((tmp >> 32) & 0xffffffff, base);
- __raw_writel(tmp & 0xffffffff, base + sizeof(u32));
-
- return 0;
-}
-
-static struct superhyway_ops sh4202_superhyway_ops = {
- .read_vcr = sh4202_read_vcr,
- .write_vcr = sh4202_write_vcr,
-};
-
-struct superhyway_bus superhyway_channels[] = {
- { &sh4202_superhyway_ops, },
- { 0, },
-};
-
-int __init superhyway_scan_bus(struct superhyway_bus *bus)
-{
- return superhyway_add_devices(bus, sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
deleted file mode 100644
index fc44d9c88b4191..00000000000000
--- a/arch/sh/include/asm/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generated-y += syscall_table.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
deleted file mode 100644
index feccfe639e3896..00000000000000
--- a/arch/sh/include/asm/adc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ADC_H
-#define __ASM_ADC_H
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-#include <cpu/adc.h>
-
-int adc_single(unsigned int channel);
-
-#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
deleted file mode 100644
index 468fba333e896b..00000000000000
--- a/arch/sh/include/asm/addrspace.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#include <cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
- [ P0/U0 (virtual) ] 0x00000000 <------ User space
- [ P1 (fixed) cached ] 0x80000000 <------ Kernel space
- [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access
- [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area
- [ P4 control ] 0xE0000000
- */
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#else
-/*
- * These will never work in 32-bit, don't even bother.
- */
-#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#endif
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000)
-
-#ifdef CONFIG_SH_STORE_QUEUES
-/*
- * This is a special case for the SH-4 store queues, as pages for this
- * space still need to be faulted in before it's possible to flush the
- * store queue cache for writeout to the remapped region.
- */
-#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000)
-#else
-#define P3_ADDR_MAX P4SEG
-#endif
-
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/alignment.h b/arch/sh/include/asm/alignment.h
deleted file mode 100644
index 4f3e715b8c2668..00000000000000
--- a/arch/sh/include/asm/alignment.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ALIGNMENT_H
-#define __ASM_SH_ALIGNMENT_H
-
-#include <linux/types.h>
-
-extern void inc_unaligned_byte_access(void);
-extern void inc_unaligned_word_access(void);
-extern void inc_unaligned_dword_access(void);
-extern void inc_unaligned_multi_access(void);
-extern void inc_unaligned_user_access(void);
-extern void inc_unaligned_kernel_access(void);
-
-#define UM_WARN (1 << 0)
-#define UM_FIXUP (1 << 1)
-#define UM_SIGNAL (1 << 2)
-
-extern unsigned int unaligned_user_action(void);
-
-extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
-
-#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/arch/sh/include/asm/asm-offsets.h b/arch/sh/include/asm/asm-offsets.h
deleted file mode 100644
index 9f8535716392cc..00000000000000
--- a/arch/sh/include/asm/asm-offsets.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <generated/asm-offsets.h>
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
deleted file mode 100644
index 059791fd394fc4..00000000000000
--- a/arch/sh/include/asm/atomic-grb.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_GRB_H
-#define __ASM_SH_ATOMIC_GRB_H
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
-} \
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return tmp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- int res, tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%2, %0 \n\t" /* load old value */ \
- " mov %0, %1 \n\t" /* save old value */ \
- " " #op " %3, %0 \n\t" /* $op */ \
- " mov.l %0, @%2 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), "=&r" (res), "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
deleted file mode 100644
index 7665de9d00d0d1..00000000000000
--- a/arch/sh/include/asm/atomic-irq.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_IRQ_H
-#define __ASM_SH_ATOMIC_IRQ_H
-
-#include <linux/irqflags.h>
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op, c_op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
-}
-
-#define ATOMIC_OP_RETURN(op, c_op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- temp c_op i; \
- v->counter = temp; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op, c_op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_OP_RETURN(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(add, +=)
-ATOMIC_OPS(sub, -=)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(and, &=)
-ATOMIC_OPS(or, |=)
-ATOMIC_OPS(xor, ^=)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
deleted file mode 100644
index b63dcfbfa14ef5..00000000000000
--- a/arch/sh/include/asm/atomic-llsc.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_LLSC_H
-#define __ASM_SH_ATOMIC_LLSC_H
-
-/*
- * SH-4A note:
- *
- * We basically get atomic_xxx_return() for free compared with
- * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
- * encoding, so the retval is automatically set without having to
- * do any special work.
- */
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long tmp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "\n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
- : "=&z" (tmp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
-}
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "_return \n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long res, temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%3, %0 ! atomic_fetch_" #op " \n" \
-" mov %0, %1 \n" \
-" " #op " %2, %0 \n" \
-" movco.l %0, @%3 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp), "=&r" (res) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
deleted file mode 100644
index 528bfeda78f569..00000000000000
--- a/arch/sh/include/asm/atomic.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_H
-#define __ASM_SH_ATOMIC_H
-
-#if defined(CONFIG_CPU_J2)
-
-#include <asm-generic/atomic.h>
-
-#else
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- *
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-#include <asm/barrier.h>
-
-#define arch_atomic_read(v) READ_ONCE((v)->counter)
-#define arch_atomic_set(v,i) WRITE_ONCE((v)->counter, (i))
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/atomic-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/atomic-llsc.h>
-#else
-#include <asm/atomic-irq.h>
-#endif
-
-#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
-#define arch_atomic_cmpxchg(v, o, n) (arch_cmpxchg(&((v)->counter), (o), (n)))
-
-#endif /* CONFIG_CPU_J2 */
-
-#endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h
deleted file mode 100644
index 0d58a0159aa6dc..00000000000000
--- a/arch/sh/include/asm/barrier.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-#ifndef __ASM_SH_BARRIER_H
-#define __ASM_SH_BARRIER_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/cache_insns.h>
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A)
-#define mb() __asm__ __volatile__ ("synco": : :"memory")
-#define rmb() mb()
-#define wmb() mb()
-#define ctrl_barrier() __icbi(PAGE_OFFSET)
-#else
-#if defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#define __smp_mb() do { int tmp = 0; __asm__ __volatile__ ("cas.l %0,%0,@%1" : "+r"(tmp) : "z"(&tmp) : "memory", "t"); } while(0)
-#define __smp_rmb() __smp_mb()
-#define __smp_wmb() __smp_mb()
-#endif
-#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#endif
-
-#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#include <asm-generic/barrier.h>
-
-#endif /* __ASM_SH_BARRIER_H */
diff --git a/arch/sh/include/asm/bitops-cas.h b/arch/sh/include/asm/bitops-cas.h
deleted file mode 100644
index ba517b3f24da62..00000000000000
--- a/arch/sh/include/asm/bitops-cas.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_CAS_H
-#define __ASM_SH_BITOPS_CAS_H
-
-static inline unsigned __bo_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-
- return !!(old & mask);
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_CAS_H */
diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
deleted file mode 100644
index 75b5980399d44d..00000000000000
--- a/arch/sh/include/asm/bitops-grb.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_GRB_H
-#define __ASM_SH_BITOPS_GRB_H
-
-static inline void set_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " or %2, %0 \n\t" /* or */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void clear_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = ~(1 << (nr & 0x1f));
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " and %2, %0 \n\t" /* and */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void change_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " xor %2, %0 \n\t" /* xor */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline int test_and_set_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t"
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " or %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1" ,"t");
-
- return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void * addr)
-{
- int mask, retval,not_mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- not_mask = ~mask;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " and %4, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask),
- "r" (not_mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " xor %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h
deleted file mode 100644
index 47036845fc6837..00000000000000
--- a/arch/sh/include/asm/bitops-llsc.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_LLSC_H
-#define __ASM_SH_BITOPS_LLSC_H
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! set_bit \n\t"
- "or %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! clear_bit \n\t"
- "and %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (~mask)
- : "t", "memory"
- );
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! change_bit \n\t"
- "xor %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_set_bit \n\t"
- "mov %0, %1 \n\t"
- "or %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_clear_bit \n\t"
- "mov %0, %1 \n\t"
- "and %4, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask), "r" (~mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_change_bit \n\t"
- "mov %0, %1 \n\t"
- "xor %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_LLSC_H */
diff --git a/arch/sh/include/asm/bitops-op32.h b/arch/sh/include/asm/bitops-op32.h
deleted file mode 100644
index 5ace89b4650791..00000000000000
--- a/arch/sh/include/asm/bitops-op32.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_OP32_H
-#define __ASM_SH_BITOPS_OP32_H
-
-#include <linux/bits.h>
-
-/*
- * The bit modifying instructions on SH-2A are only capable of working
- * with a 3-bit immediate, which signifies the shift position for the bit
- * being worked on.
- */
-#if defined(__BIG_ENDIAN)
-#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
-#define BYTE_NUMBER(nr) ((nr ^ BITOP_LE_SWIZZLE) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr ^ BITOP_LE_SWIZZLE) % BITS_PER_BYTE)
-#else
-#define BYTE_NUMBER(nr) ((nr) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr) % BITS_PER_BYTE)
-#endif
-
-static __always_inline void
-arch___set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bset.b %1, @(%O2,%0) ! __set_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)), "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p |= mask;
- }
-}
-
-static __always_inline void
-arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bclr.b %1, @(%O2,%0) ! __clear_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p &= ~mask;
- }
-}
-
-/**
- * arch___change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __always_inline void
-arch___change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bxor.b %1, @(%O2,%0) ! __change_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p ^= mask;
- }
-}
-
-/**
- * arch___test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old | mask;
- return (old & mask) != 0;
-}
-
-/**
- * arch___test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old & ~mask;
- return (old & mask) != 0;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __always_inline bool
-arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old ^ mask;
- return (old & mask) != 0;
-}
-
-#define arch_test_bit generic_test_bit
-#define arch_test_bit_acquire generic_test_bit_acquire
-
-#include <asm-generic/bitops/non-instrumented-non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_OP32_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
deleted file mode 100644
index 10ceb0d6b5a997..00000000000000
--- a/arch/sh/include/asm/bitops.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_H
-#define __ASM_SH_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/* For __swab32 */
-#include <asm/byteorder.h>
-#include <asm/barrier.h>
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/bitops-grb.h>
-#elif defined(CONFIG_CPU_SH2A)
-#include <asm-generic/bitops/atomic.h>
-#include <asm/bitops-op32.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/bitops-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/bitops-cas.h>
-#else
-#include <asm-generic/bitops/atomic.h>
-#include <asm-generic/bitops/non-atomic.h>
-#endif
-
-static inline unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bt/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bf/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/le.h>
-
-#endif /* __ASM_SH_BITOPS_H */
diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h
deleted file mode 100644
index 5d04f2c6256376..00000000000000
--- a/arch/sh/include/asm/bl_bit.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/bl_bit_32.h>
diff --git a/arch/sh/include/asm/bl_bit_32.h b/arch/sh/include/asm/bl_bit_32.h
deleted file mode 100644
index 1f7d225fc604f8..00000000000000
--- a/arch/sh/include/asm/bl_bit_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BL_BIT_32_H
-#define __ASM_SH_BL_BIT_32_H
-
-static inline void set_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or %2, %0\n\t"
- "and %3, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "r" (0x10000000), "r" (0xffffff0f)
- : "memory"
- );
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %2, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~0x10000000)
- : "memory"
- );
-}
-
-#endif /* __ASM_SH_BL_BIT_32_H */
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
deleted file mode 100644
index 05a485c4fabcfc..00000000000000
--- a/arch/sh/include/asm/bug.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUG_H
-#define __ASM_SH_BUG_H
-
-#include <linux/linkage.h>
-
-#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */
-#define BUGFLAG_UNWINDER (1 << 1)
-
-#ifdef CONFIG_GENERIC_BUG
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-/**
- * _EMIT_BUG_ENTRY
- * %1 - __FILE__
- * %2 - __LINE__
- * %3 - trap type
- * %4 - sizeof(struct bug_entry)
- *
- * The trapa opcode itself sits in %0.
- * The %O notation is used to avoid # generation.
- *
- * The offending file and line are encoded in the __bug_table section.
- */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b, %O1\n" \
- "\t.short %O2, %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#else
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b\n" \
- "\t.short %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#endif
-
-#define BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), "i" (0), \
- "i" (sizeof(struct bug_entry))); \
- unreachable(); \
-} while (0)
-
-#define __WARN_FLAGS(flags) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_WARNING|(flags)), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define WARN_ON(x) ({ \
- int __ret_warn_on = !!(x); \
- if (__builtin_constant_p(__ret_warn_on)) { \
- if (__ret_warn_on) \
- __WARN(); \
- } else { \
- if (unlikely(__ret_warn_on)) \
- __WARN(); \
- } \
- unlikely(__ret_warn_on); \
-})
-
-#define UNWINDER_BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_UNWINDER), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define UNWINDER_BUG_ON(x) ({ \
- int __ret_unwinder_on = !!(x); \
- if (__builtin_constant_p(__ret_unwinder_on)) { \
- if (__ret_unwinder_on) \
- UNWINDER_BUG(); \
- } else { \
- if (unlikely(__ret_unwinder_on)) \
- UNWINDER_BUG(); \
- } \
- unlikely(__ret_unwinder_on); \
-})
-
-#else
-
-#define UNWINDER_BUG BUG
-#define UNWINDER_BUG_ON BUG_ON
-
-#endif /* CONFIG_GENERIC_BUG */
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-
-/* arch/sh/kernel/traps.c */
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
-extern void die_if_no_fixup(const char *str, struct pt_regs *regs, long err);
-
-#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
deleted file mode 100644
index fe52abb69cea31..00000000000000
--- a/arch/sh/include/asm/bugs.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-extern void select_idle_routine(void);
-
-static void __init check_bugs(void)
-{
- extern unsigned long loops_per_jiffy;
- char *p = &init_utsname()->machine[2]; /* "sh" */
-
- select_idle_routine();
-
- current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
- switch (current_cpu_data.family) {
- case CPU_FAMILY_SH2:
- *p++ = '2';
- break;
- case CPU_FAMILY_SH2A:
- *p++ = '2';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH3:
- *p++ = '3';
- break;
- case CPU_FAMILY_SH4:
- *p++ = '4';
- break;
- case CPU_FAMILY_SH4A:
- *p++ = '4';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH4AL_DSP:
- *p++ = '4';
- *p++ = 'a';
- *p++ = 'l';
- *p++ = '-';
- *p++ = 'd';
- *p++ = 's';
- *p++ = 'p';
- break;
- case CPU_FAMILY_UNKNOWN:
- /*
- * Specifically use CPU_FAMILY_UNKNOWN rather than
- * default:, so we're able to have the compiler whine
- * about unhandled enumerations.
- */
- break;
- }
-
- printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
- /* 'eb' means 'Endian Big' */
- *p++ = 'e';
- *p++ = 'b';
-#endif
- *p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
deleted file mode 100644
index 32dfa6b82ec663..00000000000000
--- a/arch/sh/include/asm/cache.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-
-#include <linux/init.h>
-#include <cpu/cache.h>
-
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __section(".data..read_mostly")
-
-#ifndef __ASSEMBLY__
-struct cache_info {
- unsigned int ways; /* Number of cache ways */
- unsigned int sets; /* Number of cache sets */
- unsigned int linesz; /* Cache line size (bytes) */
-
- unsigned int way_size; /* sets * line size */
-
- /*
- * way_incr is the address offset for accessing the next way
- * in memory mapped cache array ops.
- */
- unsigned int way_incr;
- unsigned int entry_shift;
- unsigned int entry_mask;
-
- /*
- * Compute a mask which selects the address bits which overlap between
- * 1. those used to select the cache set during indexing
- * 2. those in the physical page number.
- */
- unsigned int alias_mask;
- unsigned int n_aliases; /* Number of aliases */
-
- unsigned long flags;
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h
deleted file mode 100644
index d7edd5297bd0f8..00000000000000
--- a/arch/sh/include/asm/cache_insns.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/cache_insns_32.h>
diff --git a/arch/sh/include/asm/cache_insns_32.h b/arch/sh/include/asm/cache_insns_32.h
deleted file mode 100644
index 470880b972cb1e..00000000000000
--- a/arch/sh/include/asm/cache_insns_32.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHE_INSNS_32_H
-#define __ASM_SH_CACHE_INSNS_32_H
-
-#include <linux/types.h>
-
-#if defined(CONFIG_CPU_SH4A)
-#define __icbi(addr) __asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
-#else
-#define __icbi(addr) mb()
-#endif
-
-#define __ocbp(addr) __asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
-#define __ocbi(addr) __asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
-#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
-
-static inline reg_size_t register_align(void *val)
-{
- return (unsigned long)(signed long)val;
-}
-
-#endif /* __ASM_SH_CACHE_INSNS_32_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
deleted file mode 100644
index 481a664287e2e4..00000000000000
--- a/arch/sh/include/asm/cacheflush.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/*
- * Cache flushing:
- *
- * - flush_cache_all() flushes entire cache
- * - flush_cache_mm(mm) flushes the specified mm context's cache lines
- * - flush_cache_dup mm(mm) handles cache flushing when forking
- * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- * - flush_cache_range(vma, start, end) flushes a range of pages
- *
- * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_range(start, end) flushes(invalidates) a range for icache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- * - flush_cache_sigtramp(vaddr) flushes the signal trampoline
- */
-extern void (*local_flush_cache_all)(void *args);
-extern void (*local_flush_cache_mm)(void *args);
-extern void (*local_flush_cache_dup_mm)(void *args);
-extern void (*local_flush_cache_page)(void *args);
-extern void (*local_flush_cache_range)(void *args);
-extern void (*local_flush_dcache_page)(void *args);
-extern void (*local_flush_icache_range)(void *args);
-extern void (*local_flush_icache_page)(void *args);
-extern void (*local_flush_cache_sigtramp)(void *args);
-
-static inline void cache_noop(void *args) { }
-
-extern void (*__flush_wback_region)(void *start, int size);
-extern void (*__flush_purge_region)(void *start, int size);
-extern void (*__flush_invalidate_region)(void *start, int size);
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_dup_mm(struct mm_struct *mm);
-extern void flush_cache_page(struct vm_area_struct *vma,
- unsigned long addr, unsigned long pfn);
-extern void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-void flush_dcache_page(struct page *page);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_user_range flush_icache_range
-extern void flush_icache_page(struct vm_area_struct *vma,
- struct page *page);
-extern void flush_cache_sigtramp(unsigned long address);
-
-struct flusher_data {
- struct vm_area_struct *vma;
- unsigned long addr1, addr2;
-};
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-extern void __flush_anon_page(struct page *page, unsigned long);
-
-static inline void flush_anon_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vmaddr)
-{
- if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
- __flush_anon_page(page, vmaddr);
-}
-
-#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
-static inline void flush_kernel_vmap_range(void *addr, int size)
-{
- __flush_wback_region(addr, size);
-}
-static inline void invalidate_kernel_vmap_range(void *addr, int size)
-{
- __flush_invalidate_region(addr, size);
-}
-
-extern void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-#define flush_cache_vmap(start, end) local_flush_cache_all(NULL)
-#define flush_cache_vunmap(start, end) local_flush_cache_all(NULL)
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-void kmap_coherent_init(void);
-void *kmap_coherent(struct page *page, unsigned long addr);
-void kunmap_coherent(void *kvaddr);
-
-#define PG_dcache_clean PG_arch_1
-
-void cpu_cache_init(void);
-
-static inline void *sh_cacheop_vaddr(void *vaddr)
-{
- if (__in_29bit_mode())
- vaddr = (void *)CAC_ADDR((unsigned long)vaddr);
- return vaddr;
-}
-
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
deleted file mode 100644
index 00e39dd0d146a3..00000000000000
--- a/arch/sh/include/asm/checksum.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/checksum_32.h>
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
deleted file mode 100644
index a6501b856f3eb4..00000000000000
--- a/arch/sh/include/asm/checksum_32.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CHECKSUM_H
-#define __ASM_SH_CHECKSUM_H
-
-/*
- * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
- */
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len);
-
-#define _HAVE_ARCH_CSUM_AND_COPY
-/*
- * Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
- * access_ok().
- */
-static inline
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len)
-{
- return csum_partial_copy_generic(src, dst, len);
-}
-
-#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
-static inline
-__wsum csum_and_copy_from_user(const void __user *src, void *dst, int len)
-{
- if (!access_ok(src, len))
- return 0;
- return csum_partial_copy_generic((__force const void *)src, dst, len);
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int __dummy;
- __asm__("swap.w %0, %1\n\t"
- "extu.w %0, %0\n\t"
- "extu.w %1, %1\n\t"
- "add %1, %0\n\t"
- "swap.w %0, %1\n\t"
- "add %1, %0\n\t"
- "not %0, %0\n\t"
- : "=r" (sum), "=&r" (__dummy)
- : "0" (sum)
- : "t");
- return (__force __sum16)sum;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
- * for linux by * Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- __wsum sum;
- unsigned int __dummy0, __dummy1;
-
- __asm__ __volatile__(
- "mov.l @%1+, %0\n\t"
- "mov.l @%1+, %3\n\t"
- "add #-2, %2\n\t"
- "clrt\n\t"
- "1:\t"
- "addc %3, %0\n\t"
- "movt %4\n\t"
- "mov.l @%1+, %3\n\t"
- "dt %2\n\t"
- "bf/s 1b\n\t"
- " cmp/eq #1, %4\n\t"
- "addc %3, %0\n\t"
- "addc %2, %0" /* Here %2 is 0, add carry-bit */
- /* Since the input registers which are loaded with iph and ihl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
- : "1" (iph), "2" (ihl)
- : "t", "memory");
-
- return csum_fold(sum);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
-#ifdef __LITTLE_ENDIAN__
- unsigned long len_proto = (proto + len) << 8;
-#else
- unsigned long len_proto = proto + len;
-#endif
- __asm__("clrt\n\t"
- "addc %0, %1\n\t"
- "addc %2, %1\n\t"
- "addc %3, %1\n\t"
- "movt %0\n\t"
- "add %1, %0"
- : "=r" (sum), "=r" (len_proto)
- : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
- : "t");
-
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, __u8 proto, __wsum sum)
-{
- unsigned int __dummy;
- __asm__("clrt\n\t"
- "mov.l @(0,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(0,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%3), %1\n\t"
- "addc %1, %0\n\t"
- "addc %4, %0\n\t"
- "addc %5, %0\n\t"
- "movt %1\n\t"
- "add %1, %0\n"
- : "=r" (sum), "=&r" (__dummy)
- : "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
- : "t");
-
- return csum_fold(sum);
-}
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user(const void *src,
- void __user *dst,
- int len)
-{
- if (!access_ok(dst, len))
- return 0;
- return csum_partial_copy_generic(src, (__force void *)dst, len);
-}
-#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
deleted file mode 100644
index b65bc2908e8aaf..00000000000000
--- a/arch/sh/include/asm/clock.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/sh_clk.h>
-
-/* Should be defined by processor-specific code */
-void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
-int __init arch_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock-cpg.c */
-int __init __deprecated cpg_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-cas.h b/arch/sh/include/asm/cmpxchg-cas.h
deleted file mode 100644
index f508db6eaf3192..00000000000000
--- a/arch/sh/include/asm/cmpxchg-cas.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_CAS_H
-#define __ASM_SH_CMPXCHG_CAS_H
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(m)
- : "t", "memory" );
- return new;
-}
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long old;
- do old = *m;
- while (__cmpxchg_u32(m, old, val) != old);
- return old;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_CAS_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
deleted file mode 100644
index e12279ea35cf74..00000000000000
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_GRB_H
-#define __ASM_SH_CMPXCHG_GRB_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-4, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " mov.l %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory", "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.w @%1, %0 \n\t" /* load old value */
- " extu.w %0, %0 \n\t" /* extend as unsigned */
- " mov.w %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.b @%1, %0 \n\t" /* load old value */
- " extu.b %0, %0 \n\t" /* extend as unsigned */
- " mov.b %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%3, %0 \n\t" /* load old value */
- " cmp/eq %0, %1 \n\t"
- " bf 1f \n\t" /* if not equal */
- " mov.l %2, @%3 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (old), "+r" (new) /* old or new can be r15 */
- : "r" (m)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
deleted file mode 100644
index 07d3e7f0838919..00000000000000
--- a/arch/sh/include/asm/cmpxchg-irq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_IRQ_H
-#define __ASM_SH_CMPXCHG_IRQ_H
-
-#include <linux/irqflags.h>
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val & 0xff;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- __u32 retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags); /* implies memory barrier */
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
deleted file mode 100644
index d5270cd297c142..00000000000000
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_LLSC_H
-#define __ASM_SH_CMPXCHG_LLSC_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! xchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "mov %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z"(tmp), "=&r" (retval)
- : "r" (m), "r" (val)
- : "t", "memory"
- );
-
- return retval;
-}
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! __cmpxchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "cmp/eq %1, %3 \n\t"
- "bf 2f \n\t"
- "mov %4, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
- : "t", "memory"
- );
-
- return retval;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/arch/sh/include/asm/cmpxchg-xchg.h b/arch/sh/include/asm/cmpxchg-xchg.h
deleted file mode 100644
index c373f21efe4d90..00000000000000
--- a/arch/sh/include/asm/cmpxchg-xchg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_XCHG_H
-#define __ASM_SH_CMPXCHG_XCHG_H
-
-/*
- * Copyright (C) 2016 Red Hat, Inc.
- * Author: Michael S. Tsirkin <mst@redhat.com>
- */
-#include <linux/bits.h>
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-/*
- * Portable implementations of 1 and 2 byte xchg using a 4 byte cmpxchg.
- * Note: this header isn't self-contained: before including it, __cmpxchg_u32
- * must be defined first.
- */
-static inline u32 __xchg_cmpxchg(volatile void *ptr, u32 x, int size)
-{
- int off = (unsigned long)ptr % sizeof(u32);
- volatile u32 *p = ptr - off;
-#ifdef __BIG_ENDIAN
- int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
-#else
- int bitoff = off * BITS_PER_BYTE;
-#endif
- u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
- u32 oldv, newv;
- u32 ret;
-
- do {
- oldv = READ_ONCE(*p);
- ret = (oldv & bitmask) >> bitoff;
- newv = (oldv & ~bitmask) | (x << bitoff);
- } while (__cmpxchg_u32(p, oldv, newv) != oldv);
-
- return ret;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-#endif /* __ASM_SH_CMPXCHG_XCHG_H */
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
deleted file mode 100644
index 0ed9b3f4a57796..00000000000000
--- a/arch/sh/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_H
-#define __ASM_SH_CMPXCHG_H
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/cmpxchg-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/cmpxchg-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/cmpxchg-cas.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size) \
-({ \
- unsigned long __xchg__res; \
- volatile void *__xchg_ptr = (ptr); \
- switch (size) { \
- case 4: \
- __xchg__res = xchg_u32(__xchg_ptr, x); \
- break; \
- case 2: \
- __xchg__res = xchg_u16(__xchg_ptr, x); \
- break; \
- case 1: \
- __xchg__res = xchg_u8(__xchg_ptr, x); \
- break; \
- default: \
- __xchg_called_with_bad_pointer(); \
- __xchg__res = x; \
- break; \
- } \
- \
- __xchg__res; \
-})
-
-#define arch_xchg(ptr,x) \
- ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define arch_cmpxchg(ptr,o,n) \
- ({ \
- __typeof__(*(ptr)) _o_ = (o); \
- __typeof__(*(ptr)) _n_ = (n); \
- (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
- (unsigned long)_n_, sizeof(*(ptr))); \
- })
-
-#endif /* __ASM_SH_CMPXCHG_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
deleted file mode 100644
index 6f3e686a1c6f3e..00000000000000
--- a/arch/sh/include/asm/device.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Arch specific extensions to struct device
- */
-#ifndef __ASM_SH_DEVICE_H
-#define __ASM_SH_DEVICE_H
-
-#include <asm-generic/device.h>
-
-struct platform_device;
-/* allocate contiguous memory chunk and fill in struct resource */
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize);
-
-void plat_early_device_setup(void);
-
-#endif /* __ASM_SH_DEVICE_H */
diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h
deleted file mode 100644
index 724dab912b7108..00000000000000
--- a/arch/sh/include/asm/dma-register.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Common header for the legacy SH DMA driver and the new dmaengine driver
- *
- * extracted from arch/sh/include/asm/dma-sh.h:
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-/* DMAOR definitions */
-#define DMAOR_AE 0x00000004 /* Address Error Flag */
-#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001 /* DMA Master Enable */
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L 0x00000000
-#define REQ_E 0x00080000
-#define RACK_H 0x00000000
-#define RACK_L 0x00040000
-#define ACK_R 0x00000000
-#define ACK_W 0x00020000
-#define ACK_H 0x00000000
-#define ACK_L 0x00010000
-#define DM_INC 0x00004000 /* Destination addresses are incremented */
-#define DM_DEC 0x00008000 /* Destination addresses are decremented */
-#define DM_FIX 0x0000c000 /* Destination address is fixed */
-#define SM_INC 0x00001000 /* Source addresses are incremented */
-#define SM_DEC 0x00002000 /* Source addresses are decremented */
-#define SM_FIX 0x00003000 /* Source address is fixed */
-#define RS_IN 0x00000200
-#define RS_OUT 0x00000300
-#define RS_AUTO 0x00000400 /* Auto Request */
-#define RS_ERS 0x00000800 /* DMA extended resource selector */
-#define TS_BLK 0x00000040
-#define TM_BUR 0x00000020
-#define CHCR_DE 0x00000001 /* DMA Enable */
-#define CHCR_TE 0x00000002 /* Transfer End Flag */
-#define CHCR_IE 0x00000004 /* Interrupt Enable */
-
-#endif
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
deleted file mode 100644
index c8bee3f985a293..00000000000000
--- a/arch/sh/include/asm/dma.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm-generic/dma.h>
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ 0x00
-#define DMA_MODE_WRITE 0x01
-#define DMA_MODE_MASK 0x01
-
-#define DMA_AUTOINIT 0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
- DMAC_CHANNELS_CONFIGURED = 0x01,
- DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
- DMA_CONFIGURED = 0x01,
-
- /*
- * Transfer end interrupt, inherited from DMAC.
- * wait_queue used in dma_wait_for_completion.
- */
- DMA_TEI_CAPABLE = 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
- int (*request)(struct dma_channel *chan);
- void (*free)(struct dma_channel *chan);
-
- int (*get_residue)(struct dma_channel *chan);
- int (*xfer)(struct dma_channel *chan);
- int (*configure)(struct dma_channel *chan, unsigned long flags);
- int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
- char dev_id[16]; /* unique name per DMAC of channel */
-
- unsigned int chan; /* DMAC channel number */
- unsigned int vchan; /* Virtual channel number */
-
- unsigned int mode;
- unsigned int count;
-
- unsigned long sar;
- unsigned long dar;
-
- const char **caps;
-
- unsigned long flags;
- atomic_t busy;
-
- wait_queue_head_t wait_queue;
-
- struct device dev;
- void *priv_data;
-};
-
-struct dma_info {
- struct platform_device *pdev;
-
- const char *name;
- unsigned int nr_channels;
- unsigned long flags;
-
- struct dma_ops *ops;
- struct dma_channel *channels;
-
- struct list_head list;
- int first_channel_nr;
- int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
- int ch_num;
- const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to) \
- dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to) \
- dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
- const char *dev_id);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#endif /* __ASM_SH_DMA_H */
diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h
deleted file mode 100644
index 69e119cfd711e2..00000000000000
--- a/arch/sh/include/asm/dmabrg.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * SH7760 DMABRG (USB/Audio) support
- */
-
-#ifndef _DMABRG_H_
-#define _DMABRG_H_
-
-/* IRQ sources */
-#define DMABRGIRQ_USBDMA 0
-#define DMABRGIRQ_USBDMAERR 1
-#define DMABRGIRQ_A0TXF 2
-#define DMABRGIRQ_A0TXH 3
-#define DMABRGIRQ_A0RXF 4
-#define DMABRGIRQ_A0RXH 5
-#define DMABRGIRQ_A1TXF 6
-#define DMABRGIRQ_A1TXH 7
-#define DMABRGIRQ_A1RXF 8
-#define DMABRGIRQ_A1RXH 9
-
-extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
-extern void dmabrg_free_irq(unsigned int);
-
-#endif
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
deleted file mode 100644
index 57195447412212..00000000000000
--- a/arch/sh/include/asm/dwarf.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- */
-#ifndef __ASM_SH_DWARF_H
-#define __ASM_SH_DWARF_H
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-/*
- * DWARF expression operations
- */
-#define DW_OP_addr 0x03
-#define DW_OP_deref 0x06
-#define DW_OP_const1u 0x08
-#define DW_OP_const1s 0x09
-#define DW_OP_const2u 0x0a
-#define DW_OP_const2s 0x0b
-#define DW_OP_const4u 0x0c
-#define DW_OP_const4s 0x0d
-#define DW_OP_const8u 0x0e
-#define DW_OP_const8s 0x0f
-#define DW_OP_constu 0x10
-#define DW_OP_consts 0x11
-#define DW_OP_dup 0x12
-#define DW_OP_drop 0x13
-#define DW_OP_over 0x14
-#define DW_OP_pick 0x15
-#define DW_OP_swap 0x16
-#define DW_OP_rot 0x17
-#define DW_OP_xderef 0x18
-#define DW_OP_abs 0x19
-#define DW_OP_and 0x1a
-#define DW_OP_div 0x1b
-#define DW_OP_minus 0x1c
-#define DW_OP_mod 0x1d
-#define DW_OP_mul 0x1e
-#define DW_OP_neg 0x1f
-#define DW_OP_not 0x20
-#define DW_OP_or 0x21
-#define DW_OP_plus 0x22
-#define DW_OP_plus_uconst 0x23
-#define DW_OP_shl 0x24
-#define DW_OP_shr 0x25
-#define DW_OP_shra 0x26
-#define DW_OP_xor 0x27
-#define DW_OP_skip 0x2f
-#define DW_OP_bra 0x28
-#define DW_OP_eq 0x29
-#define DW_OP_ge 0x2a
-#define DW_OP_gt 0x2b
-#define DW_OP_le 0x2c
-#define DW_OP_lt 0x2d
-#define DW_OP_ne 0x2e
-#define DW_OP_lit0 0x30
-#define DW_OP_lit1 0x31
-#define DW_OP_lit2 0x32
-#define DW_OP_lit3 0x33
-#define DW_OP_lit4 0x34
-#define DW_OP_lit5 0x35
-#define DW_OP_lit6 0x36
-#define DW_OP_lit7 0x37
-#define DW_OP_lit8 0x38
-#define DW_OP_lit9 0x39
-#define DW_OP_lit10 0x3a
-#define DW_OP_lit11 0x3b
-#define DW_OP_lit12 0x3c
-#define DW_OP_lit13 0x3d
-#define DW_OP_lit14 0x3e
-#define DW_OP_lit15 0x3f
-#define DW_OP_lit16 0x40
-#define DW_OP_lit17 0x41
-#define DW_OP_lit18 0x42
-#define DW_OP_lit19 0x43
-#define DW_OP_lit20 0x44
-#define DW_OP_lit21 0x45
-#define DW_OP_lit22 0x46
-#define DW_OP_lit23 0x47
-#define DW_OP_lit24 0x48
-#define DW_OP_lit25 0x49
-#define DW_OP_lit26 0x4a
-#define DW_OP_lit27 0x4b
-#define DW_OP_lit28 0x4c
-#define DW_OP_lit29 0x4d
-#define DW_OP_lit30 0x4e
-#define DW_OP_lit31 0x4f
-#define DW_OP_reg0 0x50
-#define DW_OP_reg1 0x51
-#define DW_OP_reg2 0x52
-#define DW_OP_reg3 0x53
-#define DW_OP_reg4 0x54
-#define DW_OP_reg5 0x55
-#define DW_OP_reg6 0x56
-#define DW_OP_reg7 0x57
-#define DW_OP_reg8 0x58
-#define DW_OP_reg9 0x59
-#define DW_OP_reg10 0x5a
-#define DW_OP_reg11 0x5b
-#define DW_OP_reg12 0x5c
-#define DW_OP_reg13 0x5d
-#define DW_OP_reg14 0x5e
-#define DW_OP_reg15 0x5f
-#define DW_OP_reg16 0x60
-#define DW_OP_reg17 0x61
-#define DW_OP_reg18 0x62
-#define DW_OP_reg19 0x63
-#define DW_OP_reg20 0x64
-#define DW_OP_reg21 0x65
-#define DW_OP_reg22 0x66
-#define DW_OP_reg23 0x67
-#define DW_OP_reg24 0x68
-#define DW_OP_reg25 0x69
-#define DW_OP_reg26 0x6a
-#define DW_OP_reg27 0x6b
-#define DW_OP_reg28 0x6c
-#define DW_OP_reg29 0x6d
-#define DW_OP_reg30 0x6e
-#define DW_OP_reg31 0x6f
-#define DW_OP_breg0 0x70
-#define DW_OP_breg1 0x71
-#define DW_OP_breg2 0x72
-#define DW_OP_breg3 0x73
-#define DW_OP_breg4 0x74
-#define DW_OP_breg5 0x75
-#define DW_OP_breg6 0x76
-#define DW_OP_breg7 0x77
-#define DW_OP_breg8 0x78
-#define DW_OP_breg9 0x79
-#define DW_OP_breg10 0x7a
-#define DW_OP_breg11 0x7b
-#define DW_OP_breg12 0x7c
-#define DW_OP_breg13 0x7d
-#define DW_OP_breg14 0x7e
-#define DW_OP_breg15 0x7f
-#define DW_OP_breg16 0x80
-#define DW_OP_breg17 0x81
-#define DW_OP_breg18 0x82
-#define DW_OP_breg19 0x83
-#define DW_OP_breg20 0x84
-#define DW_OP_breg21 0x85
-#define DW_OP_breg22 0x86
-#define DW_OP_breg23 0x87
-#define DW_OP_breg24 0x88
-#define DW_OP_breg25 0x89
-#define DW_OP_breg26 0x8a
-#define DW_OP_breg27 0x8b
-#define DW_OP_breg28 0x8c
-#define DW_OP_breg29 0x8d
-#define DW_OP_breg30 0x8e
-#define DW_OP_breg31 0x8f
-#define DW_OP_regx 0x90
-#define DW_OP_fbreg 0x91
-#define DW_OP_bregx 0x92
-#define DW_OP_piece 0x93
-#define DW_OP_deref_size 0x94
-#define DW_OP_xderef_size 0x95
-#define DW_OP_nop 0x96
-#define DW_OP_push_object_address 0x97
-#define DW_OP_call2 0x98
-#define DW_OP_call4 0x99
-#define DW_OP_call_ref 0x9a
-#define DW_OP_form_tls_address 0x9b
-#define DW_OP_call_frame_cfa 0x9c
-#define DW_OP_bit_piece 0x9d
-#define DW_OP_lo_user 0xe0
-#define DW_OP_hi_user 0xff
-
-/*
- * Addresses used in FDE entries in the .eh_frame section may be encoded
- * using one of the following encodings.
- */
-#define DW_EH_PE_absptr 0x00
-#define DW_EH_PE_omit 0xff
-#define DW_EH_PE_uleb128 0x01
-#define DW_EH_PE_udata2 0x02
-#define DW_EH_PE_udata4 0x03
-#define DW_EH_PE_udata8 0x04
-#define DW_EH_PE_sleb128 0x09
-#define DW_EH_PE_sdata2 0x0a
-#define DW_EH_PE_sdata4 0x0b
-#define DW_EH_PE_sdata8 0x0c
-#define DW_EH_PE_signed 0x09
-
-#define DW_EH_PE_pcrel 0x10
-
-/*
- * The architecture-specific register number that contains the return
- * address in the .debug_frame table.
- */
-#define DWARF_ARCH_RA_REG 17
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <linux/bug.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-/*
- * Read either the frame pointer (r14) or the stack pointer (r15).
- * NOTE: this MUST be inlined.
- */
-static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
-{
- unsigned long value = 0;
-
- switch (reg) {
- case 14:
- __asm__ __volatile__("mov r14, %0\n" : "=r" (value));
- break;
- case 15:
- __asm__ __volatile__("mov r15, %0\n" : "=r" (value));
- break;
- default:
- BUG();
- }
-
- return value;
-}
-
-/**
- * dwarf_cie - Common Information Entry
- */
-struct dwarf_cie {
- unsigned long length;
- unsigned long cie_id;
- unsigned char version;
- const char *augmentation;
- unsigned int code_alignment_factor;
- int data_alignment_factor;
-
- /* Which column in the rule table represents return addr of func. */
- unsigned int return_address_reg;
-
- unsigned char *initial_instructions;
- unsigned char *instructions_end;
-
- unsigned char encoding;
-
- unsigned long cie_pointer;
-
- unsigned long flags;
-#define DWARF_CIE_Z_AUGMENTATION (1 << 0)
-
- /* linked-list entry if this CIE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_fde - Frame Description Entry
- */
-struct dwarf_fde {
- unsigned long length;
- unsigned long cie_pointer;
- struct dwarf_cie *cie;
- unsigned long initial_location;
- unsigned long address_range;
- unsigned char *instructions;
- unsigned char *end;
-
- /* linked-list entry if this FDE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_frame - DWARF information for a frame in the call stack
- */
-struct dwarf_frame {
- struct dwarf_frame *prev, *next;
-
- unsigned long pc;
-
- struct list_head reg_list;
-
- unsigned long cfa;
-
- /* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
- unsigned int cfa_register;
- unsigned int cfa_offset;
-
- /* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
- unsigned char *cfa_expr;
- unsigned int cfa_expr_len;
-
- unsigned long flags;
-#define DWARF_FRAME_CFA_REG_OFFSET (1 << 0)
-#define DWARF_FRAME_CFA_REG_EXP (1 << 1)
-
- unsigned long return_addr;
-};
-
-/**
- * dwarf_reg - DWARF register
- * @flags: Describes how to calculate the value of this register
- */
-struct dwarf_reg {
- struct list_head link;
-
- unsigned int number;
-
- unsigned long addr;
- unsigned long flags;
-#define DWARF_REG_OFFSET (1 << 0)
-#define DWARF_VAL_OFFSET (1 << 1)
-#define DWARF_UNDEFINED (1 << 2)
-};
-
-/*
- * Call Frame instruction opcodes.
- */
-#define DW_CFA_advance_loc 0x40
-#define DW_CFA_offset 0x80
-#define DW_CFA_restore 0xc0
-#define DW_CFA_nop 0x00
-#define DW_CFA_set_loc 0x01
-#define DW_CFA_advance_loc1 0x02
-#define DW_CFA_advance_loc2 0x03
-#define DW_CFA_advance_loc4 0x04
-#define DW_CFA_offset_extended 0x05
-#define DW_CFA_restore_extended 0x06
-#define DW_CFA_undefined 0x07
-#define DW_CFA_same_value 0x08
-#define DW_CFA_register 0x09
-#define DW_CFA_remember_state 0x0a
-#define DW_CFA_restore_state 0x0b
-#define DW_CFA_def_cfa 0x0c
-#define DW_CFA_def_cfa_register 0x0d
-#define DW_CFA_def_cfa_offset 0x0e
-#define DW_CFA_def_cfa_expression 0x0f
-#define DW_CFA_expression 0x10
-#define DW_CFA_offset_extended_sf 0x11
-#define DW_CFA_def_cfa_sf 0x12
-#define DW_CFA_def_cfa_offset_sf 0x13
-#define DW_CFA_val_offset 0x14
-#define DW_CFA_val_offset_sf 0x15
-#define DW_CFA_val_expression 0x16
-#define DW_CFA_lo_user 0x1c
-#define DW_CFA_hi_user 0x3f
-
-/* GNU extension opcodes */
-#define DW_CFA_GNU_args_size 0x2e
-#define DW_CFA_GNU_negative_offset_extended 0x2f
-
-/*
- * Some call frame instructions encode their operands in the opcode. We
- * need some helper functions to extract both the opcode and operands
- * from an instruction.
- */
-static inline unsigned int DW_CFA_opcode(unsigned long insn)
-{
- return (insn & 0xc0);
-}
-
-static inline unsigned int DW_CFA_operand(unsigned long insn)
-{
- return (insn & 0x3f);
-}
-
-#define DW_EH_FRAME_CIE 0 /* .eh_frame CIE IDs are 0 */
-#define DW_CIE_ID 0xffffffff
-#define DW64_CIE_ID 0xffffffffffffffffULL
-
-/*
- * DWARF FDE/CIE length field values.
- */
-#define DW_EXT_LO 0xfffffff0
-#define DW_EXT_HI 0xffffffff
-#define DW_EXT_DWARF64 DW_EXT_HI
-
-extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
- struct dwarf_frame *);
-extern void dwarf_free_frame(struct dwarf_frame *);
-
-extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
- struct module *);
-extern void module_dwarf_cleanup(struct module *);
-
-#endif /* !__ASSEMBLY__ */
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_REGISTER .cfi_register
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_UNDEFINED .cfi_undefined
-
-#else
-
-/*
- * Use the asm comment character to ignore the rest of the line.
- */
-#define CFI_IGNORE !
-
-#define CFI_STARTPROC CFI_IGNORE
-#define CFI_ENDPROC CFI_IGNORE
-#define CFI_DEF_CFA CFI_IGNORE
-#define CFI_REGISTER CFI_IGNORE
-#define CFI_REL_OFFSET CFI_IGNORE
-#define CFI_UNDEFINED CFI_IGNORE
-
-#ifndef __ASSEMBLY__
-static inline void dwarf_unwinder_init(void)
-{
-}
-
-#define module_dwarf_finalize(hdr, sechdrs, me) (0)
-#define module_dwarf_cleanup(mod) do { } while (0)
-
-#endif
-
-#endif /* CONFIG_DWARF_UNWINDER */
-
-#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
deleted file mode 100644
index 2862d6d1cb64f1..00000000000000
--- a/arch/sh/include/asm/elf.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <linux/utsname.h>
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* ELF header e_flags defines */
-#define EF_SH_PIC 0x100 /* -fpic */
-#define EF_SH_FDPIC 0x8000 /* -mfdpic */
-
-/* SH (particularly SHcompact) relocation types */
-#define R_SH_NONE 0
-#define R_SH_DIR32 1
-#define R_SH_REL32 2
-#define R_SH_DIR8WPN 3
-#define R_SH_IND12W 4
-#define R_SH_DIR8WPL 5
-#define R_SH_DIR8WPZ 6
-#define R_SH_DIR8BP 7
-#define R_SH_DIR8W 8
-#define R_SH_DIR8L 9
-#define R_SH_SWITCH16 25
-#define R_SH_SWITCH32 26
-#define R_SH_USES 27
-#define R_SH_COUNT 28
-#define R_SH_ALIGN 29
-#define R_SH_CODE 30
-#define R_SH_DATA 31
-#define R_SH_LABEL 32
-#define R_SH_SWITCH8 33
-#define R_SH_GNU_VTINHERIT 34
-#define R_SH_GNU_VTENTRY 35
-#define R_SH_TLS_GD_32 144
-#define R_SH_TLS_LD_32 145
-#define R_SH_TLS_LDO_32 146
-#define R_SH_TLS_IE_32 147
-#define R_SH_TLS_LE_32 148
-#define R_SH_TLS_DTPMOD32 149
-#define R_SH_TLS_DTPOFF32 150
-#define R_SH_TLS_TPOFF32 151
-#define R_SH_GOT32 160
-#define R_SH_PLT32 161
-#define R_SH_COPY 162
-#define R_SH_GLOB_DAT 163
-#define R_SH_JMP_SLOT 164
-#define R_SH_RELATIVE 165
-#define R_SH_GOTOFF 166
-#define R_SH_GOTPC 167
-
-/* FDPIC relocs */
-#define R_SH_GOT20 201
-#define R_SH_GOTOFF20 202
-#define R_SH_GOTFUNCDESC 203
-#define R_SH_GOTFUNCDESC20 204
-#define R_SH_GOTOFFFUNCDESC 205
-#define R_SH_GOTOFFFUNCDESC20 206
-#define R_SH_FUNCDESC 207
-#define R_SH_FUNCDESC_VALUE 208
-
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16 246
-#define R_SH_IMM_LOW16_PCREL 247
-#define R_SH_IMM_MEDLOW16 248
-#define R_SH_IMM_MEDLOW16_PCREL 249
-/* Keep this the last entry. */
-#define R_SH_NUM 256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA ELFDATA2LSB
-#else
-#define ELF_DATA ELFDATA2MSB
-#endif
-#define ELF_ARCH EM_SH
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_SH)
-#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC)
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC)
-
-/*
- * Enable dump using regset.
- * This covers all of general/DSP/FPU regs.
- */
-#define CORE_DUMP_USE_REGSET
-
-#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC
-#define ELF_EXEC_PAGESIZE PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (utsname()->machine)
-
-#define ELF_PLAT_INIT(_r, load_addr) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \
- _dynamic_addr) \
-do { \
- _r->regs[0] = 0; \
- _r->regs[1] = 0; \
- _r->regs[2] = 0; \
- _r->regs[3] = 0; \
- _r->regs[4] = 0; \
- _r->regs[5] = 0; \
- _r->regs[6] = 0; \
- _r->regs[7] = 0; \
- _r->regs[8] = _exec_map_addr; \
- _r->regs[9] = _interp_map_addr; \
- _r->regs[10] = _dynamic_addr; \
- _r->regs[11] = 0; \
- _r->regs[12] = 0; \
- _r->regs[13] = 0; \
- _r->regs[14] = 0; \
- _r->sr = SR_FD; \
-} while (0)
-
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int uses_interp);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE ((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT \
- if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
- else \
- NEW_AUX_ENT(AT_IGNORE, 0)
-#else
-#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO \
-do { \
- /* Optional FPU initialization */ \
- FPU_AUX_ENT; \
- \
- /* Optional vsyscall entry */ \
- VSYSCALL_AUX_ENT; \
- \
- /* Cache desc */ \
- NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \
- NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \
- NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \
-} while (0)
-
-#endif /* __ASM_SH_ELF_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
deleted file mode 100644
index 5ce142d8c5a89e..00000000000000
--- a/arch/sh/include/asm/entry-macros.S
+++ /dev/null
@@ -1,123 +0,0 @@
-! SPDX-License-Identifier: GPL-2.0
-! entry.S macro define
-
- .macro cli
- stc sr, r0
- or #0xf0, r0
- ldc r0, sr
- .endm
-
- .macro sti
- mov #0xfffffff0, r11
- extu.b r11, r11
- not r11, r11
- stc sr, r10
- and r11, r10
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc k_g_imask, r11
- or r11, r10
-#endif
- ldc r10, sr
- .endm
-
- .macro get_current_thread_info, ti, tmp
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc r7_bank, \ti
-#else
- mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
- shll8 \tmp
- shll2 \tmp
- mov r15, \ti
- and \tmp, \ti
-#endif
- .endm
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-
- .macro TRACE_IRQS_ON
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_on
-7835:
- .endm
- .macro TRACE_IRQS_OFF
-
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_off
-7835:
- .endm
-
-#else
- .macro TRACE_IRQS_ON
- .endm
-
- .macro TRACE_IRQS_OFF
- .endm
-#endif
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-# define PREF(x) pref @x
-#else
-# define PREF(x) nop
-#endif
-
- /*
- * Macro for use within assembly. Because the DWARF unwinder
- * needs to use the frame register to unwind the stack, we
- * need to setup r14 with the value of the stack pointer as
- * the return address is usually on the stack somewhere.
- */
- .macro setup_frame_reg
-#ifdef CONFIG_DWARF_UNWINDER
- mov r15, r14
-#endif
- .endm
diff --git a/arch/sh/include/asm/extable.h b/arch/sh/include/asm/extable.h
deleted file mode 100644
index 5658d2bae37242..00000000000000
--- a/arch/sh/include/asm/extable.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_EXTABLE_H
-#define __ASM_SH_EXTABLE_H
-
-#include <asm-generic/extable.h>
-
-#endif
diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h
deleted file mode 100644
index 9a0bca2686fd3d..00000000000000
--- a/arch/sh/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
deleted file mode 100644
index b07fbc7f7bc6ac..00000000000000
--- a/arch/sh/include/asm/fixmap.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * fixmap.h: compile-time virtual memory allocation
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of P3 backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanizm,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
- /*
- * The FIX_CMAP entries are used by kmap_coherent() to get virtual
- * addresses which are of a known color, and so their values are
- * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
- * which is the same color as a page (n<<PAGE_SHIFT).
- */
-#define FIX_N_COLOURS 8
- FIX_CMAP_BEGIN,
- FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
-
-#ifdef CONFIG_IOREMAP_FIXED
- /*
- * FIX_IOREMAP entries are useful for mapping physical address
- * space before ioremap() is useable, e.g. really early in boot
- * before kmalloc() is working.
- */
-#define FIX_N_IOREMAPS 32
- FIX_IOREMAP_BEGIN,
- FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
-#endif
-
- __end_of_fixed_addresses
-};
-
-extern void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
-extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
-
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap, and leave one page empty
- * at the top of mem..
- */
-#define FIXADDR_TOP (P4SEG - PAGE_SIZE)
-#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
-
-#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NOCACHE
-
-#include <asm-generic/fixmap.h>
-
-#endif
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
deleted file mode 100644
index fee4f25555cb53..00000000000000
--- a/arch/sh/include/asm/flat.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FLAT_H
-#define __ASM_SH_FLAT_H
-
-#include <asm/unaligned.h>
-
-static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
- u32 *addr)
-{
- *addr = get_unaligned((__force u32 *)rp);
- return 0;
-}
-static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
-{
- put_unaligned(addr, (__force u32 *)rp);
- return 0;
-}
-
-#define FLAT_PLAT_INIT(_r) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#endif /* __ASM_SH_FLAT_H */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
deleted file mode 100644
index 04584be8986c41..00000000000000
--- a/arch/sh/include/asm/fpu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FPU_H
-#define __ASM_SH_FPU_H
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-
-struct task_struct;
-
-#ifdef CONFIG_SH_FPU
-static inline void release_fpu(struct pt_regs *regs)
-{
- regs->sr |= SR_FD;
-}
-
-static inline void grab_fpu(struct pt_regs *regs)
-{
- regs->sr &= ~SR_FD;
-}
-
-extern void save_fpu(struct task_struct *__tsk);
-extern void restore_fpu(struct task_struct *__tsk);
-extern void fpu_state_restore(struct pt_regs *regs);
-extern void __fpu_state_restore(void);
-#else
-#define save_fpu(tsk) do { } while (0)
-#define restore_fpu(tsk) do { } while (0)
-#define release_fpu(regs) do { } while (0)
-#define grab_fpu(regs) do { } while (0)
-#define fpu_state_restore(regs) do { } while (0)
-#define __fpu_state_restore(regs) do { } while (0)
-#endif
-
-struct user_regset;
-
-extern int do_fpu_inst(unsigned short, struct pt_regs *);
-extern int init_fpu(struct task_struct *);
-
-static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- save_fpu(tsk);
- release_fpu(regs);
- } else
- tsk->thread.fpu_counter = 0;
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- __unlazy_fpu(tsk, regs);
- preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- release_fpu(regs);
- }
- preempt_enable();
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
deleted file mode 100644
index 87c23621b7ae81..00000000000000
--- a/arch/sh/include/asm/freq.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-
-#include <cpu/freq.h>
-
-#endif /* __ASM_SH_FREQ_H */
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
deleted file mode 100644
index b1c1dc0cc261d1..00000000000000
--- a/arch/sh/include/asm/ftrace.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FTRACE_H
-#define __ASM_SH_FTRACE_H
-
-#ifdef CONFIG_FUNCTION_TRACER
-
-#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
-#define FTRACE_SYSCALL_MAX NR_syscalls
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-
-#define MCOUNT_ADDR ((unsigned long)(mcount))
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#define CALL_ADDR ((long)(ftrace_call))
-#define STUB_ADDR ((long)(ftrace_stub))
-#define GRAPH_ADDR ((long)(ftrace_graph_call))
-#define CALLER_ADDR ((long)(ftrace_caller))
-
-#define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALL_ADDR) - 4)
-#define GRAPH_INSN_OFFSET ((CALLER_ADDR - GRAPH_ADDR) - 4)
-
-struct dyn_arch_ftrace {
- /* No extra data needed on sh */
-};
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
- /* 'addr' is the memory table address. */
- return addr;
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifndef __ASSEMBLY__
-
-/* arch/sh/kernel/return_address.c */
-extern void *return_address(unsigned int);
-
-#define ftrace_return_address(n) return_address(n)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/futex-cas.h b/arch/sh/include/asm/futex-cas.h
deleted file mode 100644
index ed738e32b5ec45..00000000000000
--- a/arch/sh/include/asm/futex-cas.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_CAS_H
-#define __ASM_SH_FUTEX_CAS_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "1:\n\t"
- "cas.l %2, %1, @r0\n"
- "2:\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "+r" (newval)
- :"r" (oldval), "i" (-EFAULT), "z" (uaddr)
- :"t", "memory");
- if (err) return err;
- *uval = newval;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_CAS_H */
diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h
deleted file mode 100644
index 9bc053242ea037..00000000000000
--- a/arch/sh/include/asm/futex-irq.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_IRQ_H
-#define __ASM_SH_FUTEX_IRQ_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- unsigned long flags;
- int ret;
- u32 prev = 0;
-
- local_irq_save(flags);
-
- ret = get_user(prev, uaddr);
- if (!ret && oldval == prev)
- ret = put_user(newval, uaddr);
-
- local_irq_restore(flags);
-
- *uval = prev;
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/arch/sh/include/asm/futex-llsc.h b/arch/sh/include/asm/futex-llsc.h
deleted file mode 100644
index 6e1570752bc1e9..00000000000000
--- a/arch/sh/include/asm/futex-llsc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_LLSC_H
-#define __ASM_SH_FUTEX_LLSC_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "synco\n"
- "1:\n\t"
- "movli.l @%2, r0\n\t"
- "mov r0, %1\n\t"
- "cmp/eq %1, %4\n\t"
- "bf 2f\n\t"
- "mov %5, r0\n\t"
- "movco.l r0, @%2\n\t"
- "bf 1b\n"
- "2:\n\t"
- "synco\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "=&r" (*uval)
- :"r" (uaddr), "i" (-EFAULT), "r" (oldval), "r" (newval)
- :"t", "memory", "r0");
- if (err) return err;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_LLSC_H */
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
deleted file mode 100644
index b70f3fce6ed77a..00000000000000
--- a/arch/sh/include/asm/futex.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_H
-#define __ASM_SH_FUTEX_H
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-#if !defined(CONFIG_SMP)
-#include <asm/futex-irq.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/futex-cas.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/futex-llsc.h>
-#else
-#error SMP not supported on this configuration.
-#endif
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- if (!access_ok(uaddr, sizeof(u32)))
- return -EFAULT;
-
- return atomic_futex_op_cmpxchg_inatomic(uval, uaddr, oldval, newval);
-}
-
-static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
- u32 __user *uaddr)
-{
- u32 oldval, newval, prev;
- int ret;
-
- do {
- ret = get_user(oldval, uaddr);
-
- if (ret) break;
-
- switch (op) {
- case FUTEX_OP_SET:
- newval = oparg;
- break;
- case FUTEX_OP_ADD:
- newval = oldval + oparg;
- break;
- case FUTEX_OP_OR:
- newval = oldval | oparg;
- break;
- case FUTEX_OP_ANDN:
- newval = oldval & ~oparg;
- break;
- case FUTEX_OP_XOR:
- newval = oldval ^ oparg;
- break;
- default:
- ret = -ENOSYS;
- break;
- }
-
- if (ret) break;
-
- ret = futex_atomic_cmpxchg_inatomic(&prev, uaddr, oldval, newval);
- } while (!ret && prev != oldval);
-
- if (!ret)
- *oval = oldval;
-
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index d643250f0a0fa0..00000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
deleted file mode 100644
index 9fe4495a8e90b3..00000000000000
--- a/arch/sh/include/asm/hardirq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HARDIRQ_H
-#define __ASM_SH_HARDIRQ_H
-
-extern void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-#define ARCH_WANTS_NMI_IRQSTAT
-
-#include <asm-generic/hardirq.h>
-
-#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
deleted file mode 100644
index afb24cb034b114..00000000000000
--- a/arch/sh/include/asm/hd64461.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HD64461
-#define __ASM_SH_HD64461
-/*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2000 YAEGASHI Takeshi
- *
- * Hitachi HD64461 companion chip support
- * (please note manual reference 0x10000000 = 0xb0000000)
- */
-
-/* Constants for PCMCIA mappings */
-#define HD64461_PCC_WINDOW 0x01000000
-
-/* Area 6 - Slot 0 - memory and/or IO card */
-#define HD64461_IOBASE 0xb0000000
-#define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x))
-#define HD64461_PCC0_BASE HD64461_IO_OFFSET(0x8000000)
-#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */
-#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */
-#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */
-
-/* Area 5 - Slot 1 - memory card only */
-#define HD64461_PCC1_BASE HD64461_IO_OFFSET(0x4000000)
-#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */
-#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */
-
-/* Standby Control Register for HD64461 */
-#define HD64461_STBCR HD64461_IO_OFFSET(0x00000000)
-#define HD64461_STBCR_CKIO_STBY 0x2000
-#define HD64461_STBCR_SAFECKE_IST 0x1000
-#define HD64461_STBCR_SLCKE_IST 0x0800
-#define HD64461_STBCR_SAFECKE_OST 0x0400
-#define HD64461_STBCR_SLCKE_OST 0x0200
-#define HD64461_STBCR_SMIAST 0x0100
-#define HD64461_STBCR_SLCDST 0x0080
-#define HD64461_STBCR_SPC0ST 0x0040
-#define HD64461_STBCR_SPC1ST 0x0020
-#define HD64461_STBCR_SAFEST 0x0010
-#define HD64461_STBCR_STM0ST 0x0008
-#define HD64461_STBCR_STM1ST 0x0004
-#define HD64461_STBCR_SIRST 0x0002
-#define HD64461_STBCR_SURTST 0x0001
-
-/* System Configuration Register */
-#define HD64461_SYSCR HD64461_IO_OFFSET(0x02)
-
-/* CPU Data Bus Control Register */
-#define HD64461_SCPUCR HD64461_IO_OFFSET(0x04)
-
-/* Base Address Register */
-#define HD64461_LCDCBAR HD64461_IO_OFFSET(0x1000)
-
-/* Line increment address */
-#define HD64461_LCDCLOR HD64461_IO_OFFSET(0x1002)
-
-/* Controls LCD controller */
-#define HD64461_LCDCCR HD64461_IO_OFFSET(0x1004)
-
-/* LCCDR control bits */
-#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */
-#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */
-#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */
-#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */
-#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */
-#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */
-
-/* Controls LCD (1) */
-#define HD64461_LDR1 HD64461_IO_OFFSET(0x1010)
-#define HD64461_LDR1_DON 0x01 /* Display On */
-#define HD64461_LDR1_DINV 0x80 /* Display Invert */
-
-/* Controls LCD (2) */
-#define HD64461_LDR2 HD64461_IO_OFFSET(0x1012)
-#define HD64461_LDHNCR HD64461_IO_OFFSET(0x1014) /* Number of horizontal characters */
-#define HD64461_LDHNSR HD64461_IO_OFFSET(0x1016) /* Specify output start position + width of CL1 */
-#define HD64461_LDVNTR HD64461_IO_OFFSET(0x1018) /* Specify total vertical lines */
-#define HD64461_LDVNDR HD64461_IO_OFFSET(0x101a) /* specify number of display vertical lines */
-#define HD64461_LDVSPR HD64461_IO_OFFSET(0x101c) /* specify vertical synchronization pos and AC nr */
-
-/* Controls LCD (3) */
-#define HD64461_LDR3 HD64461_IO_OFFSET(0x101e)
-
-/* Palette Registers */
-#define HD64461_CPTWAR HD64461_IO_OFFSET(0x1030) /* Color Palette Write Address Register */
-#define HD64461_CPTWDR HD64461_IO_OFFSET(0x1032) /* Color Palette Write Data Register */
-#define HD64461_CPTRAR HD64461_IO_OFFSET(0x1034) /* Color Palette Read Address Register */
-#define HD64461_CPTRDR HD64461_IO_OFFSET(0x1036) /* Color Palette Read Data Register */
-
-#define HD64461_GRDOR HD64461_IO_OFFSET(0x1040) /* Display Resolution Offset Register */
-#define HD64461_GRSCR HD64461_IO_OFFSET(0x1042) /* Solid Color Register */
-#define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */
-
-#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */
-#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */
-#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */
-#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */
-#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */
-#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */
-
-/* Line Drawing Registers */
-#define HD64461_LNSARH HD64461_IO_OFFSET(0x1046) /* Line Start Address Register (H) */
-#define HD64461_LNSARL HD64461_IO_OFFSET(0x1048) /* Line Start Address Register (L) */
-#define HD64461_LNAXLR HD64461_IO_OFFSET(0x104a) /* Axis Pixel Length Register */
-#define HD64461_LNDGR HD64461_IO_OFFSET(0x104c) /* Diagonal Register */
-#define HD64461_LNAXR HD64461_IO_OFFSET(0x104e) /* Axial Register */
-#define HD64461_LNERTR HD64461_IO_OFFSET(0x1050) /* Start Error Term Register */
-#define HD64461_LNMDR HD64461_IO_OFFSET(0x1052) /* Line Mode Register */
-
-/* BitBLT Registers */
-#define HD64461_BBTSSARH HD64461_IO_OFFSET(0x1054) /* Source Start Address Register (H) */
-#define HD64461_BBTSSARL HD64461_IO_OFFSET(0x1056) /* Source Start Address Register (L) */
-#define HD64461_BBTDSARH HD64461_IO_OFFSET(0x1058) /* Destination Start Address Register (H) */
-#define HD64461_BBTDSARL HD64461_IO_OFFSET(0x105a) /* Destination Start Address Register (L) */
-#define HD64461_BBTDWR HD64461_IO_OFFSET(0x105c) /* Destination Block Width Register */
-#define HD64461_BBTDHR HD64461_IO_OFFSET(0x105e) /* Destination Block Height Register */
-#define HD64461_BBTPARH HD64461_IO_OFFSET(0x1060) /* Pattern Start Address Register (H) */
-#define HD64461_BBTPARL HD64461_IO_OFFSET(0x1062) /* Pattern Start Address Register (L) */
-#define HD64461_BBTMARH HD64461_IO_OFFSET(0x1064) /* Mask Start Address Register (H) */
-#define HD64461_BBTMARL HD64461_IO_OFFSET(0x1066) /* Mask Start Address Register (L) */
-#define HD64461_BBTROPR HD64461_IO_OFFSET(0x1068) /* ROP Register */
-#define HD64461_BBTMDR HD64461_IO_OFFSET(0x106a) /* BitBLT Mode Register */
-
-/* PC Card Controller Registers */
-/* Maps to Physical Area 6 */
-#define HD64461_PCC0ISR HD64461_IO_OFFSET(0x2000) /* socket 0 interface status */
-#define HD64461_PCC0GCR HD64461_IO_OFFSET(0x2002) /* socket 0 general control */
-#define HD64461_PCC0CSCR HD64461_IO_OFFSET(0x2004) /* socket 0 card status change */
-#define HD64461_PCC0CSCIER HD64461_IO_OFFSET(0x2006) /* socket 0 card status change interrupt enable */
-#define HD64461_PCC0SCR HD64461_IO_OFFSET(0x2008) /* socket 0 software control */
-/* Maps to Physical Area 5 */
-#define HD64461_PCC1ISR HD64461_IO_OFFSET(0x2010) /* socket 1 interface status */
-#define HD64461_PCC1GCR HD64461_IO_OFFSET(0x2012) /* socket 1 general control */
-#define HD64461_PCC1CSCR HD64461_IO_OFFSET(0x2014) /* socket 1 card status change */
-#define HD64461_PCC1CSCIER HD64461_IO_OFFSET(0x2016) /* socket 1 card status change interrupt enable */
-#define HD64461_PCC1SCR HD64461_IO_OFFSET(0x2018) /* socket 1 software control */
-
-/* PCC Interface Status Register */
-#define HD64461_PCCISR_READY 0x80 /* card ready */
-#define HD64461_PCCISR_MWP 0x40 /* card write-protected */
-#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */
-#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */
-#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */
-#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */
-#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */
-#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */
-
-#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */
-#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */
-#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */
-#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */
-#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */
-#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */
-
-/* PCC General Control Register */
-#define HD64461_PCCGCR_DRVE 0x80 /* output drive */
-#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */
-#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
-#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */
-#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */
-#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */
-#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */
-#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */
-
-/* PCC Card Status Change Register */
-#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */
-#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */
-#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */
-#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */
-#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */
-#define HD64461_PCCCSCR_RC 0x04 /* READY change */
-#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */
-#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */
-
-/* PCC Card Status Change Interrupt Enable Register */
-#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */
-#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */
-#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */
-#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */
-#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */
-#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */
-
-#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */
-#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */
-#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */
-#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */
-#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/
-
-/* PCC Software Control Register */
-#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */
-#define HD64461_PCCSCR_SWP 0x01 /* write protect */
-
-/* PCC0 Output Pins Control Register */
-#define HD64461_P0OCR HD64461_IO_OFFSET(0x202a)
-
-/* PCC1 Output Pins Control Register */
-#define HD64461_P1OCR HD64461_IO_OFFSET(0x202c)
-
-/* PC Card General Control Register */
-#define HD64461_PGCR HD64461_IO_OFFSET(0x202e)
-
-/* Port Control Registers */
-#define HD64461_GPACR HD64461_IO_OFFSET(0x4000) /* Port A - Handles IRDA/TIMER */
-#define HD64461_GPBCR HD64461_IO_OFFSET(0x4002) /* Port B - Handles UART */
-#define HD64461_GPCCR HD64461_IO_OFFSET(0x4004) /* Port C - Handles PCMCIA 1 */
-#define HD64461_GPDCR HD64461_IO_OFFSET(0x4006) /* Port D - Handles PCMCIA 1 */
-
-/* Port Control Data Registers */
-#define HD64461_GPADR HD64461_IO_OFFSET(0x4010) /* A */
-#define HD64461_GPBDR HD64461_IO_OFFSET(0x4012) /* B */
-#define HD64461_GPCDR HD64461_IO_OFFSET(0x4014) /* C */
-#define HD64461_GPDDR HD64461_IO_OFFSET(0x4016) /* D */
-
-/* Interrupt Control Registers */
-#define HD64461_GPAICR HD64461_IO_OFFSET(0x4020) /* A */
-#define HD64461_GPBICR HD64461_IO_OFFSET(0x4022) /* B */
-#define HD64461_GPCICR HD64461_IO_OFFSET(0x4024) /* C */
-#define HD64461_GPDICR HD64461_IO_OFFSET(0x4026) /* D */
-
-/* Interrupt Status Registers */
-#define HD64461_GPAISR HD64461_IO_OFFSET(0x4040) /* A */
-#define HD64461_GPBISR HD64461_IO_OFFSET(0x4042) /* B */
-#define HD64461_GPCISR HD64461_IO_OFFSET(0x4044) /* C */
-#define HD64461_GPDISR HD64461_IO_OFFSET(0x4046) /* D */
-
-/* Interrupt Request Register & Interrupt Mask Register */
-#define HD64461_NIRR HD64461_IO_OFFSET(0x5000)
-#define HD64461_NIMR HD64461_IO_OFFSET(0x5002)
-
-#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
-#define OFFCHIP_IRQ_BASE 64
-#define HD64461_IRQ_NUM 16
-
-#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
-#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6)
-#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9)
-#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10)
-#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11)
-#define HD64461_IRQ_AFE (HD64461_IRQBASE+12)
-#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13)
-#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14)
-
-#define __IO_PREFIX hd64461
-#include <asm/io_generic.h>
-
-/* arch/sh/cchips/hd6446x/hd64461/setup.c */
-void hd64461_register_irq_demux(int irq,
- int (*demux) (int irq, void *dev), void *dev);
-void hd64461_unregister_irq_demux(int irq);
-
-#endif
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
deleted file mode 100644
index 4028ca4058d171..00000000000000
--- a/arch/sh/include/asm/heartbeat.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HEARTBEAT_H
-#define __ASM_SH_HEARTBEAT_H
-
-#include <linux/timer.h>
-
-#define HEARTBEAT_INVERTED (1 << 0)
-
-struct heartbeat_data {
- void __iomem *base;
- unsigned char *bit_pos;
- unsigned int nr_bits;
- struct timer_list timer;
- unsigned int regsize;
- unsigned int mask;
- unsigned long flags;
-};
-
-#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h
deleted file mode 100644
index 4d3ba39e681c4f..00000000000000
--- a/arch/sh/include/asm/hugetlb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_HUGETLB_H
-#define _ASM_SH_HUGETLB_H
-
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-#define __HAVE_ARCH_PREPARE_HUGEPAGE_RANGE
-static inline int prepare_hugepage_range(struct file *file,
- unsigned long addr, unsigned long len)
-{
- if (len & ~HPAGE_MASK)
- return -EINVAL;
- if (addr & ~HPAGE_MASK)
- return -EINVAL;
- return 0;
-}
-
-#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH
-static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
-{
- return *ptep;
-}
-
-static inline void arch_clear_hugepage_flags(struct page *page)
-{
- clear_bit(PG_dcache_clean, &page->flags);
-}
-#define arch_clear_hugepage_flags arch_clear_hugepage_flags
-
-#include <asm-generic/hugetlb.h>
-
-#endif /* _ASM_SH_HUGETLB_H */
diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h
deleted file mode 100644
index 361a0f57bdebda..00000000000000
--- a/arch/sh/include/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_BREAKPOINT_H
-#define __ASM_SH_HW_BREAKPOINT_H
-
-#include <uapi/asm/hw_breakpoint.h>
-
-#define __ARCH_HW_BREAKPOINT_H
-
-#include <linux/kdebug.h>
-#include <linux/types.h>
-
-struct arch_hw_breakpoint {
- unsigned long address;
- u16 len;
- u16 type;
-};
-
-enum {
- SH_BREAKPOINT_READ = (1 << 1),
- SH_BREAKPOINT_WRITE = (1 << 2),
- SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
-
- SH_BREAKPOINT_LEN_1 = (1 << 12),
- SH_BREAKPOINT_LEN_2 = (1 << 13),
- SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
- SH_BREAKPOINT_LEN_8 = (1 << 14),
-};
-
-struct sh_ubc {
- const char *name;
- unsigned int num_events;
- unsigned int trap_nr;
- void (*enable)(struct arch_hw_breakpoint *, int);
- void (*disable)(struct arch_hw_breakpoint *, int);
- void (*enable_all)(unsigned long);
- void (*disable_all)(void);
- unsigned long (*active_mask)(void);
- unsigned long (*triggered_mask)(void);
- void (*clear_triggered_mask)(unsigned long);
- struct clk *clk; /* optional interface clock / MSTP bit */
-};
-
-struct perf_event_attr;
-struct perf_event;
-struct task_struct;
-struct pmu;
-
-/* Maximum number of UBC channels */
-#define HBP_NUM 2
-
-#define hw_breakpoint_slots(type) (HBP_NUM)
-
-/* arch/sh/kernel/hw_breakpoint.c */
-extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data);
-
-int arch_install_hw_breakpoint(struct perf_event *bp);
-void arch_uninstall_hw_breakpoint(struct perf_event *bp);
-void hw_breakpoint_pmu_read(struct perf_event *bp);
-
-extern void arch_fill_perf_breakpoint(struct perf_event *bp);
-extern int register_sh_ubc(struct sh_ubc *);
-
-extern struct pmu perf_ops_bp;
-
-#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
deleted file mode 100644
index ce23e3332f9c97..00000000000000
--- a/arch/sh/include/asm/hw_irq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <linux/sh_intc.h>
-#include <linux/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
- unsigned char irq;
- unsigned char ipr_idx; /* Index for the IPR registered */
- unsigned char shift; /* Number of bits to shift the data */
- unsigned char priority; /* The priority */
-};
-
-struct ipr_desc {
- unsigned long *ipr_offsets;
- unsigned int nr_offsets;
- struct ipr_data *ipr_data;
- unsigned int nr_irqs;
- struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-void __init plat_irq_setup(void);
-void __init plat_irq_setup_sh3(void);
-void __init plat_irq_setup_pins(int mode);
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
- IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
- IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
deleted file mode 100644
index a777f1410a6e98..00000000000000
--- a/arch/sh/include/asm/i2c-sh7760.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * MMIO/IRQ and platform data for SH7760 I2C channels
- */
-
-#ifndef _I2C_SH7760_H_
-#define _I2C_SH7760_H_
-
-#define SH7760_I2C_DEVNAME "sh7760-i2c"
-
-#define SH7760_I2C0_MMIO 0xFE140000
-#define SH7760_I2C0_MMIOEND 0xFE14003B
-
-#define SH7760_I2C1_MMIO 0xFE150000
-#define SH7760_I2C1_MMIOEND 0xFE15003B
-
-struct sh7760_i2c_platdata {
- unsigned int speed_khz;
-};
-
-#endif
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
deleted file mode 100644
index fba90e670ed41d..00000000000000
--- a/arch/sh/include/asm/io.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_H
-#define __ASM_SH_IO_H
-
-/*
- * Convention:
- * read{b,w,l,q}/write{b,w,l,q} are for PCI,
- * while in{b,w,l}/out{b,w,l} are for ISA
- *
- * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
- * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- *
- * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
- * automatically, there are also __raw versions, which do not.
- */
-#include <linux/errno.h>
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <linux/pgtable.h>
-#include <asm-generic/iomap.h>
-
-#define __IO_PREFIX generic
-#include <asm/io_generic.h>
-#include <asm-generic/pci_iomap.h>
-#include <mach/mangle-port.h>
-
-#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v))
-#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
-#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
-#define __raw_writeq(v,a) (__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
-
-#define __raw_readb(a) (__chk_io_ptr(a), *(volatile u8 __force *)(a))
-#define __raw_readw(a) (__chk_io_ptr(a), *(volatile u16 __force *)(a))
-#define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a))
-#define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a))
-
-#define readb_relaxed(c) ({ u8 __v = ioswabb(__raw_readb(c)); __v; })
-#define readw_relaxed(c) ({ u16 __v = ioswabw(__raw_readw(c)); __v; })
-#define readl_relaxed(c) ({ u32 __v = ioswabl(__raw_readl(c)); __v; })
-#define readq_relaxed(c) ({ u64 __v = ioswabq(__raw_readq(c)); __v; })
-
-#define writeb_relaxed(v,c) ((void)__raw_writeb((__force u8)ioswabb(v),c))
-#define writew_relaxed(v,c) ((void)__raw_writew((__force u16)ioswabw(v),c))
-#define writel_relaxed(v,c) ((void)__raw_writel((__force u32)ioswabl(v),c))
-#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64)ioswabq(v),c))
-
-#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; })
-#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; })
-#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; })
-#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; })
-
-#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); })
-#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); })
-#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); })
-#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); })
-
-#define readsb(p,d,l) __raw_readsb(p,d,l)
-#define readsw(p,d,l) __raw_readsw(p,d,l)
-#define readsl(p,d,l) __raw_readsl(p,d,l)
-
-#define writesb(p,d,l) __raw_writesb(p,d,l)
-#define writesw(p,d,l) __raw_writesw(p,d,l)
-#define writesl(p,d,l) __raw_writesl(p,d,l)
-
-#define __BUILD_UNCACHED_IO(bwlq, type) \
-static inline type read##bwlq##_uncached(unsigned long addr) \
-{ \
- type ret; \
- jump_to_uncached(); \
- ret = __raw_read##bwlq(addr); \
- back_to_cached(); \
- return ret; \
-} \
- \
-static inline void write##bwlq##_uncached(type v, unsigned long addr) \
-{ \
- jump_to_uncached(); \
- __raw_write##bwlq(v, addr); \
- back_to_cached(); \
-}
-
-__BUILD_UNCACHED_IO(b, u8)
-__BUILD_UNCACHED_IO(w, u16)
-__BUILD_UNCACHED_IO(l, u32)
-__BUILD_UNCACHED_IO(q, u64)
-
-#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \
- \
-static inline void \
-pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
- __addr++; \
- } \
-} \
- \
-static inline void pfx##reads##bwlq(volatile void __iomem *mem, \
- void *addr, unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
- __addr++; \
- } \
-}
-
-__BUILD_MEMORY_STRING(__raw_, b, u8)
-__BUILD_MEMORY_STRING(__raw_, w, u16)
-
-void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-__BUILD_MEMORY_STRING(__raw_, q, u64)
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-
-/*
- * Slowdown I/O port space accesses for antique hardware.
- */
-#undef CONF_SLOWDOWN_IO
-
-/*
- * On SuperH I/O ports are memory mapped, so we access them using normal
- * load/store instructions. sh_io_port_base is the virtual address to
- * which all ports are being mapped.
- */
-extern unsigned long sh_io_port_base;
-
-static inline void __set_io_port_base(unsigned long pbase)
-{
- *(unsigned long *)&sh_io_port_base = pbase;
- barrier();
-}
-
-#ifdef CONFIG_GENERIC_IOMAP
-#define __ioport_map ioport_map
-#else
-extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
-#endif
-
-#ifdef CONF_SLOWDOWN_IO
-#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
-#else
-#define SLOW_DOWN_IO
-#endif
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
- \
-static inline void pfx##out##bwlq##p(type val, unsigned long port) \
-{ \
- volatile type *__addr; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- *__addr = val; \
- slow; \
-} \
- \
-static inline type pfx##in##bwlq##p(unsigned long port) \
-{ \
- volatile type *__addr; \
- type __val; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- __val = *__addr; \
- slow; \
- \
- return __val; \
-}
-
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwlq, type) \
- __BUILD_IOPORT_PFX(, bwlq, type)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-BUILDIO_IOPORT(q, u64)
-
-#define __BUILD_IOPORT_STRING(bwlq, type) \
- \
-static inline void outs##bwlq(unsigned long port, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- out##bwlq(*__addr, port); \
- __addr++; \
- } \
-} \
- \
-static inline void ins##bwlq(unsigned long port, void *addr, \
- unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = in##bwlq(port); \
- __addr++; \
- } \
-}
-
-__BUILD_IOPORT_STRING(b, u8)
-__BUILD_IOPORT_STRING(w, u16)
-__BUILD_IOPORT_STRING(l, u32)
-__BUILD_IOPORT_STRING(q, u64)
-
-#else /* !CONFIG_HAS_IOPORT_MAP */
-
-#include <asm/io_noioport.h>
-
-#endif
-
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* We really want to try and get these to memcpy etc */
-void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
-void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* Quad-word real-mode I/O, don't ask.. */
-unsigned long long peek_real_address_q(unsigned long long addr);
-unsigned long long poke_real_address_q(unsigned long long addr,
- unsigned long long val);
-
-#if !defined(CONFIG_MMU)
-#define virt_to_phys(address) ((unsigned long)(address))
-#define phys_to_virt(address) ((void *)(address))
-#else
-#define virt_to_phys(address) (__pa(address))
-#define phys_to_virt(address) (__va(address))
-#endif
-
-#ifdef CONFIG_MMU
-void iounmap(void __iomem *addr);
-void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
- pgprot_t prot, void *caller);
-
-static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL_NOCACHE,
- __builtin_return_address(0));
-}
-
-static inline void __iomem *
-ioremap_cache(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL,
- __builtin_return_address(0));
-}
-#define ioremap_cache ioremap_cache
-
-#ifdef CONFIG_HAVE_IOREMAP_PROT
-static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
- unsigned long flags)
-{
- return __ioremap_caller(offset, size, __pgprot(flags),
- __builtin_return_address(0));
-}
-#endif /* CONFIG_HAVE_IOREMAP_PROT */
-
-#else /* CONFIG_MMU */
-static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
-{
- return (void __iomem *)(unsigned long)offset;
-}
-
-static inline void iounmap(volatile void __iomem *addr) { }
-#endif /* CONFIG_MMU */
-
-#define ioremap_uc ioremap
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-int valid_phys_addr_range(phys_addr_t addr, size_t size);
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-
-#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
deleted file mode 100644
index 87ec38f4e53291..00000000000000
--- a/arch/sh/include/asm/io_generic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Trivial I/O routine definitions, intentionally meant to be included
- * multiple times. Ugly I/O routine concatenation helpers taken from
- * alpha. Must be included _before_ io.h to avoid preprocessor-induced
- * routine mismatch.
- */
-#define IO_CONCAT(a,b) _IO_CONCAT(a,b)
-#define _IO_CONCAT(a,b) a ## _ ## b
-
-#ifndef __IO_PREFIX
-#error "Don't include this header without a valid system prefix"
-#endif
-
-void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
-void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
-void IO_CONCAT(__IO_PREFIX,mem_init)(void);
-
-#undef __IO_PREFIX
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
deleted file mode 100644
index f7938fe0f91121..00000000000000
--- a/arch/sh/include/asm/io_noioport.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_NOIOPORT_H
-#define __ASM_SH_IO_NOIOPORT_H
-
-static inline u8 inb(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u16 inw(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u32 inl(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline void outb(unsigned char x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outw(unsigned short x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outl(unsigned int x, unsigned long port)
-{
- BUG();
-}
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int size)
-{
- BUG();
- return NULL;
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
- BUG();
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
-
-static inline void insb(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insw(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insl(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsb(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsw(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsl(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-#endif /* __ASM_SH_IO_NOIOPORT_H */
diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h
deleted file mode 100644
index ac01b201d9aa9b..00000000000000
--- a/arch/sh/include/asm/io_trapped.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_TRAPPED_H
-#define __ASM_SH_IO_TRAPPED_H
-
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <asm/page.h>
-
-#define IO_TRAPPED_MAGIC 0xfeedbeef
-
-struct trapped_io {
- unsigned int magic;
- struct resource *resource;
- unsigned int num_resources;
- unsigned int minimum_bus_width;
- struct list_head list;
- void __iomem *virt_base;
-} __aligned(PAGE_SIZE);
-
-#ifdef CONFIG_IO_TRAPPED
-int register_trapped_io(struct trapped_io *tiop);
-int handle_trapped_io(struct pt_regs *regs, unsigned long address);
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size);
-
-#ifdef CONFIG_HAS_IOMEM
-extern struct list_head trapped_mem;
-
-static inline void __iomem *
-__ioremap_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_mem, offset, size);
-}
-#else
-#define __ioremap_trapped(offset, size) NULL
-#endif
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-extern struct list_head trapped_io;
-
-static inline void __iomem *
-__ioport_map_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_io, offset, size);
-}
-#else
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#else
-#define register_trapped_io(tiop) (-1)
-#define handle_trapped_io(tiop, address) 0
-#define __ioremap_trapped(offset, size) NULL
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
deleted file mode 100644
index 1c4923502fd4c1..00000000000000
--- a/arch/sh/include/asm/irq.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <linux/cpumask.h>
-#include <asm/machvec.h>
-
-/*
- * This is a special IRQ number for indicating that no IRQ has been
- * triggered and to simply ignore the IRQ dispatch. This is a special
- * case that can happen with IRQ auto-distribution when multiple CPUs
- * are woken up and signalled in parallel.
- */
-#define NO_IRQ_IGNORE ((unsigned int)-1)
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
- return irq;
-}
-
-#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-
-void init_IRQ(void);
-void migrate_irqs(void);
-
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_INTC_BALANCING
-extern unsigned int irq_lookup(unsigned int irq);
-extern void irq_finish(unsigned int irq);
-#else
-#define irq_lookup(irq) (irq)
-#define irq_finish(irq) do { } while (0)
-#endif
-
-#include <asm-generic/irq.h>
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
deleted file mode 100644
index 25f6cfef3f043a..00000000000000
--- a/arch/sh/include/asm/irqflags.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQFLAGS_H
-#define __ASM_SH_IRQFLAGS_H
-
-#define ARCH_IRQ_DISABLED 0xf0
-#define ARCH_IRQ_ENABLED 0x00
-
-#include <asm-generic/irqflags.h>
-
-#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
deleted file mode 100644
index de8693fabb1d95..00000000000000
--- a/arch/sh/include/asm/kdebug.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KDEBUG_H
-#define __ASM_SH_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
- DIE_TRAP,
- DIE_NMI,
- DIE_OOPS,
- DIE_BREAKPOINT,
- DIE_SSTEP,
-};
-
-/* arch/sh/kernel/dumpstack.c */
-extern void printk_address(unsigned long address, int reliable);
-extern void dump_mem(const char *str, const char *loglvl,
- unsigned long bottom, unsigned long top);
-
-#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
deleted file mode 100644
index 927d80ba2332a7..00000000000000
--- a/arch/sh/include/asm/kexec.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KEXEC_H
-#define __ASM_SH_KEXEC_H
-
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <linux/kernel.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
- * calculation for the amount of memory directly mappable into the
- * kernel memory space.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_PAGE_SIZE 4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_SH
-
-#ifdef CONFIG_KEXEC
-/* arch/sh/kernel/machine_kexec.c */
-void reserve_crashkernel(void);
-
-static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs)
-{
- if (oldregs)
- memcpy(newregs, oldregs, sizeof(*newregs));
- else {
- __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
- __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
- __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
- __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
- __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
- __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
- __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
- __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
- __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
- __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
- __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
- __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
- __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
- __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
- __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
- __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
-
- __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
- __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
- __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
-
- __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
- __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
-
- newregs->pc = _THIS_IP_;
- }
-}
-#else
-static inline void reserve_crashkernel(void) { }
-#endif /* CONFIG_KEXEC */
-
-#endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
deleted file mode 100644
index 0d5b840cb28963..00000000000000
--- a/arch/sh/include/asm/kgdb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KGDB_H
-#define __ASM_SH_KGDB_H
-
-#include <asm/cacheflush.h>
-#include <asm/ptrace.h>
-
-enum regnames {
- GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
- GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
-
- GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
-};
-
-#define _GP_REGS 16
-#define _EXTRA_REGS 7
-#define GDB_SIZEOF_REG sizeof(u32)
-
-#define DBG_MAX_REG_NUM (_GP_REGS + _EXTRA_REGS)
-#define NUMREGBYTES (DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG))
-
-static inline void arch_kgdb_breakpoint(void)
-{
- __asm__ __volatile__ ("trapa #0x3c\n");
-}
-
-#define BREAK_INSTR_SIZE 2
-#define BUFMAX 2048
-
-#ifdef CONFIG_SMP
-# define CACHE_FLUSH_IS_SAFE 0
-#else
-# define CACHE_FLUSH_IS_SAFE 1
-#endif
-
-#define GDB_ADJUSTS_BREAK_OFFSET
-
-#endif /* __ASM_SH_KGDB_H */
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
deleted file mode 100644
index eeba83e0a7d294..00000000000000
--- a/arch/sh/include/asm/kprobes.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KPROBES_H
-#define __ASM_SH_KPROBES_H
-
-#include <asm-generic/kprobes.h>
-
-#define BREAKPOINT_INSTRUCTION 0xc33a
-
-#ifdef CONFIG_KPROBES
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-typedef insn_size_t kprobe_opcode_t;
-
-#define MAX_INSN_SIZE 16
-#define MAX_STACK_SIZE 64
-#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
- (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
- ? (MAX_STACK_SIZE) \
- : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-
-#define flush_insn_slot(p) do { } while (0)
-#define kretprobe_blacklist_size 0
-
-struct kprobe;
-
-void arch_remove_kprobe(struct kprobe *);
-void __kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
- /* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-struct prev_kprobe {
- struct kprobe *kp;
- unsigned long status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
- unsigned long kprobe_status;
- struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-extern int kprobe_handle_illslot(unsigned long pc);
-#else
-
-#define kprobe_handle_illslot(pc) (-1)
-
-#endif /* CONFIG_KPROBES */
-#endif /* __ASM_SH_KPROBES_H */
diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h
deleted file mode 100644
index 7c2fa27a43f849..00000000000000
--- a/arch/sh/include/asm/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 4
-#define __ALIGN_STR ".balign 4"
-
-#endif
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
deleted file mode 100644
index 2b4b085e8f2195..00000000000000
--- a/arch/sh/include/asm/machvec.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/machvec.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- */
-
-#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <generated/machtypes.h>
-
-struct sh_machine_vector {
- void (*mv_setup)(char **cmdline_p);
- const char *mv_name;
-
- int (*mv_irq_demux)(int irq);
- void (*mv_init_irq)(void);
-
-#ifdef CONFIG_HAS_IOPORT_MAP
- void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
- void (*mv_ioport_unmap)(void __iomem *);
-#endif
-
- int (*mv_clk_init)(void);
- int (*mv_mode_pins)(void);
-
- void (*mv_mem_init)(void);
- void (*mv_mem_reserve)(void);
-};
-
-extern struct sh_machine_vector sh_mv;
-
-#define get_system_type() sh_mv.mv_name
-
-#define __initmv \
- __used __section(".machvec.init")
-
-#endif /* _ASM_SH_MACHVEC_H */
diff --git a/arch/sh/include/asm/mmiowb.h b/arch/sh/include/asm/mmiowb.h
deleted file mode 100644
index 535d59735f1d85..00000000000000
--- a/arch/sh/include/asm/mmiowb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMIOWB_H
-#define __ASM_SH_MMIOWB_H
-
-#include <asm/barrier.h>
-
-/* synco on SH-4A, otherwise a nop */
-#define mmiowb() wmb()
-
-#include <asm-generic/mmiowb.h>
-
-#endif /* __ASM_SH_MMIOWB_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
deleted file mode 100644
index 172e329fd92d02..00000000000000
--- a/arch/sh/include/asm/mmu.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MMU_H
-#define __MMU_H
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR 0xff000070
-#define PMB_IRMCR 0xff000078
-
-#define PASCR_SE 0x80000000
-
-#define PMB_ADDR 0xf6100000
-#define PMB_DATA 0xf7100000
-
-#define NR_PMB_ENTRIES 16
-
-#define PMB_E_MASK 0x0000000f
-#define PMB_E_SHIFT 8
-
-#define PMB_PFN_MASK 0xff000000
-
-#define PMB_SZ_16M 0x00000000
-#define PMB_SZ_64M 0x00000010
-#define PMB_SZ_128M 0x00000080
-#define PMB_SZ_512M 0x00000090
-#define PMB_SZ_MASK PMB_SZ_512M
-#define PMB_C 0x00000008
-#define PMB_WT 0x00000001
-#define PMB_UB 0x00000200
-#define PMB_CACHE_MASK (PMB_C | PMB_WT | PMB_UB)
-#define PMB_V 0x00000100
-
-#define PMB_NO_ENTRY (-1)
-
-#ifndef __ASSEMBLY__
-#include <linux/errno.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
- mm_context_id_t id;
- void *vdso;
-#else
- unsigned long end_brk;
-#endif
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- unsigned long exec_fdpic_loadmap;
- unsigned long interp_fdpic_loadmap;
-#endif
-} mm_context_t;
-
-#ifdef CONFIG_PMB
-/* arch/sh/mm/pmb.c */
-bool __in_29bit_mode(void);
-
-void pmb_init(void);
-int pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot);
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller);
-int pmb_unmap(void __iomem *addr);
-
-#else
-
-static inline int
-pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- return -EINVAL;
-}
-
-static inline void __iomem *
-pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- return NULL;
-}
-
-static inline int pmb_unmap(void __iomem *addr)
-{
- return -EINVAL;
-}
-
-#define pmb_init(addr) do { } while (0)
-
-#ifdef CONFIG_29BIT
-#define __in_29bit_mode() (1)
-#else
-#define __in_29bit_mode() (0)
-#endif
-
-#endif /* CONFIG_PMB */
-
-static inline void __iomem *
-pmb_remap(phys_addr_t phys, unsigned long size, pgprot_t prot)
-{
- return pmb_remap_caller(phys, size, prot, __builtin_return_address(0));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MMU_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
deleted file mode 100644
index 78eef4e7d5df28..00000000000000
--- a/arch/sh/include/asm/mmu_context.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#include <cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <linux/uaccess.h>
-#include <linux/mm_types.h>
-
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- * (a) TLB cache version (or round, cycle whatever expression you like)
- * (b) ASID (Address Space IDentifier)
- */
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMU_CONTEXT_ASID_MASK 0x0000ffff
-#else
-#define MMU_CONTEXT_ASID_MASK 0x000000ff
-#endif
-
-#define MMU_CONTEXT_VERSION_MASK (~0UL & ~MMU_CONTEXT_ASID_MASK)
-#define MMU_CONTEXT_FIRST_VERSION (MMU_CONTEXT_ASID_MASK + 1)
-
-/* Impossible ASID value, to differentiate from NO_CONTEXT. */
-#define MMU_NO_ASID MMU_CONTEXT_FIRST_VERSION
-#define NO_CONTEXT 0UL
-
-#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
-
-#ifdef CONFIG_MMU
-#define cpu_context(cpu, mm) ((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm) \
- (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK 0xfffff000
-
-#include <asm/mmu_context_32.h>
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
- unsigned long asid = asid_cache(cpu);
-
- /* Check if we have old version of context. */
- if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
- /* It's up to date, do nothing */
- return;
-
- /* It's old, we need to get new context with new version. */
- if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
- /*
- * We exhaust ASID of this version.
- * Flush all TLB and start new cycle.
- */
- local_flush_tlb_all();
-
- /*
- * Fix version; Note that we avoid version #0
- * to distinguish NO_CONTEXT.
- */
- if (!asid)
- asid = MMU_CONTEXT_FIRST_VERSION;
- }
-
- cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-#define init_new_context init_new_context
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
- int i;
-
- for_each_online_cpu(i)
- cpu_context(i, mm) = NO_CONTEXT;
-
- return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
- get_mmu_context(mm, cpu);
- set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
- struct mm_struct *next,
- struct task_struct *tsk)
-{
- unsigned int cpu = smp_processor_id();
-
- if (likely(prev != next)) {
- cpumask_set_cpu(cpu, mm_cpumask(next));
- set_TTB(next->pgd);
- activate_context(next, cpu);
- } else
- if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
- activate_context(next, cpu);
-}
-
-#include <asm-generic/mmu_context.h>
-
-#else
-
-#define set_asid(asid) do { } while (0)
-#define get_asid() (0)
-#define cpu_asid(cpu, mm) ({ (void)cpu; NO_CONTEXT; })
-#define switch_and_save_asid(asid) (0)
-#define set_TTB(pgd) do { } while (0)
-#define get_TTB() (0)
-
-#include <asm-generic/nommu_context.h>
-
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Enable MMU */
- __raw_writel(MMU_CONTROL_INIT, MMUCR);
- ctrl_barrier();
-
- if (asid_cache(cpu) == NO_CONTEXT)
- asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
- set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
- unsigned long cr;
-
- cr = __raw_readl(MMUCR);
- cr &= ~MMU_CONTROL_INIT;
- __raw_writel(cr, MMUCR);
-
- ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu() do { } while (0)
-#define disable_mmu() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
deleted file mode 100644
index bc5034fa62493b..00000000000000
--- a/arch/sh/include/asm/mmu_context_32.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMU_CONTEXT_32_H
-#define __ASM_SH_MMU_CONTEXT_32_H
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-static inline void set_asid(unsigned long asid)
-{
- __raw_writel(asid, MMU_PTEAEX);
-}
-
-static inline unsigned long get_asid(void)
-{
- return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
-}
-#else
-static inline void set_asid(unsigned long asid)
-{
- unsigned long __dummy;
-
- __asm__ __volatile__ ("mov.l %2, %0\n\t"
- "and %3, %0\n\t"
- "or %1, %0\n\t"
- "mov.l %0, %2"
- : "=&r" (__dummy)
- : "r" (asid), "m" (__m(MMU_PTEH)),
- "r" (0xffffff00));
-}
-
-static inline unsigned long get_asid(void)
-{
- unsigned long asid;
-
- __asm__ __volatile__ ("mov.l %1, %0"
- : "=r" (asid)
- : "m" (__m(MMU_PTEH)));
- asid &= MMU_CONTEXT_ASID_MASK;
- return asid;
-}
-#endif /* CONFIG_CPU_HAS_PTEAEX */
-
-/* MMU_TTB is used for optimizing the fault handling. */
-static inline void set_TTB(pgd_t *pgd)
-{
- __raw_writel((unsigned long)pgd, MMU_TTB);
-}
-
-static inline pgd_t *get_TTB(void)
-{
- return (pgd_t *)__raw_readl(MMU_TTB);
-}
-#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
deleted file mode 100644
index 7b8dead2723dc3..00000000000000
--- a/arch/sh/include/asm/mmzone.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMZONE_H
-#define __ASM_SH_MMZONE_H
-
-#ifdef CONFIG_NUMA
-#include <linux/numa.h>
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid) (node_data[nid])
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
- int nid;
-
- for (nid = 0; nid < MAX_NUMNODES; nid++)
- if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
- break;
-
- return nid;
-}
-
-static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
-{
- return NODE_DATA(pfn_to_nid(pfn));
-}
-
-/* arch/sh/mm/numa.c */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
-#else
-static inline void
-setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
-}
-#endif /* CONFIG_NUMA */
-
-/* Platform specific mem init */
-void __init plat_mem_setup(void);
-
-/* arch/sh/kernel/setup.c */
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-/* arch/sh/mm/init.c */
-void __init allocate_pgdat(unsigned int nid);
-
-#endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
deleted file mode 100644
index 337663a028dbc0..00000000000000
--- a/arch/sh/include/asm/module.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_MODULE_H
-#define _ASM_SH_MODULE_H
-
-#include <asm-generic/module.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-struct mod_arch_specific {
- struct list_head fde_list;
- struct list_head cie_list;
-};
-#endif
-
-#endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
deleted file mode 100644
index eca5daa43b93df..00000000000000
--- a/arch/sh/include/asm/page.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT 12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT 13
-#elif defined(CONFIG_PAGE_SIZE_16KB)
-# define PAGE_SHIFT 14
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT 16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-#define PTE_MASK PAGE_MASK
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT 16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT 18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT 20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT 22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT 26
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE (1UL << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-#include <asm/uncached.h>
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end, memory_limit;
-
-static inline unsigned long
-pages_do_alias(unsigned long addr1, unsigned long addr2)
-{
- return (addr1 ^ addr2) & shm_align_mask;
-}
-
-#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, void *from);
-#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE)
-
-struct page;
-struct vm_area_struct;
-
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-extern void clear_user_highpage(struct page *page, unsigned long vaddr);
-#define clear_user_highpage clear_user_highpage
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
- ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
- ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#else
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low)
-#define __pte(x) ((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#define pte_pgprot(x) __pgprot(pte_val(x) & PTE_FLAGS_MASK)
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START CONFIG_MEMORY_START
-#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
-
-/*
- * PHYSICAL_OFFSET is the offset in physical memory where the base
- * of the kernel is loaded.
- */
-#ifdef CONFIG_PHYSICAL_START
-#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
-#else
-#define PHYSICAL_OFFSET 0
-#endif
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_PMB
-#define ___pa(x) ((x)-PAGE_OFFSET+__MEMORY_START)
-#define ___va(x) ((x)+PAGE_OFFSET-__MEMORY_START)
-#else
-#define ___pa(x) ((x)-PAGE_OFFSET)
-#define ___va(x) ((x)+PAGE_OFFSET)
-#endif
-
-#ifndef __ASSEMBLY__
-#define __pa(x) ___pa((unsigned long)x)
-#define __va(x) (void *)___va((unsigned long)x)
-#endif /* !__ASSEMBLY__ */
-
-#ifdef CONFIG_UNCACHED_MAPPING
-#if defined(CONFIG_29BIT)
-#define UNCAC_ADDR(addr) P2SEGADDR(addr)
-#define CAC_ADDR(addr) P1SEGADDR(addr)
-#else
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
-#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
-#endif
-#else
-#define UNCAC_ADDR(addr) ((addr))
-#define CAC_ADDR(addr) ((addr))
-#endif
-
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START (__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET (PFN_START)
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
deleted file mode 100644
index 54c30126ea17c3..00000000000000
--- a/arch/sh/include/asm/pci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PCI_H
-#define __ASM_SH_PCI_H
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- already-configured bus numbers - to be used for buggy BIOSes
- or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses() 1
-
-/*
- * A board can define one or more PCI channels that represent built-in (or
- * external) PCI controllers.
- */
-struct pci_channel {
- struct pci_channel *next;
- struct pci_bus *bus;
-
- struct pci_ops *pci_ops;
-
- struct resource *resources;
- unsigned int nr_resources;
-
- unsigned long io_offset;
- unsigned long mem_offset;
-
- unsigned long reg_base;
- unsigned long io_map_base;
-
- unsigned int index;
- unsigned int need_domain_info;
-
- /* Optional error handling */
- struct timer_list err_timer, serr_timer;
- unsigned int err_irq, serr_irq;
-};
-
-/* arch/sh/drivers/pci/pci.c */
-extern raw_spinlock_t pci_config_lock;
-
-extern int register_pci_controller(struct pci_channel *hose);
-extern void pcibios_report_status(unsigned int status_mask, int warn);
-
-/* arch/sh/drivers/pci/common.c */
-extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 *value);
-extern int early_read_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 *value);
-extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 *value);
-extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 value);
-extern int early_write_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 value);
-extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 value);
-extern void pcibios_enable_timers(struct pci_channel *hose);
-extern unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status, struct pci_channel *hose);
-extern int pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus);
-
-extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
-
-#define HAVE_PCI_MMAP
-#define ARCH_GENERIC_PCI_MMAP_RESOURCE
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-#ifdef CONFIG_PCI
-/*
- * None of the SH PCI controllers support MWI, it is always treated as a
- * direct memory write.
- */
-#define PCI_DISABLE_MWI
-#endif
-
-/* Board-specific fixup routines. */
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- struct pci_channel *hose = bus->sysdata;
- return hose->need_domain_info;
-}
-
-#endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
deleted file mode 100644
index 468c7ca8bd2e50..00000000000000
--- a/arch/sh/include/asm/perf_event.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PERF_EVENT_H
-#define __ASM_SH_PERF_EVENT_H
-
-struct hw_perf_event;
-
-#define MAX_HWEVENTS 2
-
-struct sh_pmu {
- const char *name;
- unsigned int num_events;
- void (*disable_all)(void);
- void (*enable_all)(void);
- void (*enable)(struct hw_perf_event *, int);
- void (*disable)(struct hw_perf_event *, int);
- u64 (*read)(int);
- int (*event_map)(int);
- unsigned int max_events;
- unsigned long raw_event_mask;
- const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/* arch/sh/kernel/perf_event.c */
-extern int register_sh_pmu(struct sh_pmu *);
-extern int reserve_pmc_hardware(void);
-extern void release_pmc_hardware(void);
-
-#endif /* __ASM_SH_PERF_EVENT_H */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
deleted file mode 100644
index a9e98233c4d498..00000000000000
--- a/arch/sh/include/asm/pgalloc.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGALLOC_H
-#define __ASM_SH_PGALLOC_H
-
-#include <asm/page.h>
-
-#define __HAVE_ARCH_PMD_ALLOC_ONE
-#define __HAVE_ARCH_PMD_FREE
-#define __HAVE_ARCH_PGD_FREE
-#include <asm-generic/pgalloc.h>
-
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-#if PAGETABLE_LEVELS > 2
-extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
-extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
-extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
-#define __pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, (pmdp))
-#endif
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
- pte_t *pte)
-{
- set_pmd(pmd, __pmd((unsigned long)pte));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- pgtable_t pte)
-{
- set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
-}
-
-#define __pte_free_tlb(tlb,pte,addr) \
-do { \
- pgtable_pte_page_dtor(pte); \
- tlb_remove_page((tlb), (pte)); \
-} while (0)
-
-#endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
deleted file mode 100644
index 08bff93927ffde..00000000000000
--- a/arch/sh/include/asm/pgtable-2level.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_2LEVEL_H
-#define __ASM_SH_PGTABLE_2LEVEL_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-/*
- * traditional two-level paging structure
- */
-#define PAGETABLE_LEVELS 2
-
-/* PTE bits */
-#define PTE_MAGNITUDE 2 /* 32-bit PTEs */
-
-#define PTE_SHIFT PAGE_SHIFT
-#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
-
-#define PTRS_PER_PGD (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
-
-#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
deleted file mode 100644
index d1ce73f3bd85ef..00000000000000
--- a/arch/sh/include/asm/pgtable-3level.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_3LEVEL_H
-#define __ASM_SH_PGTABLE_3LEVEL_H
-
-#include <asm-generic/pgtable-nopud.h>
-
-/*
- * Some cores need a 3-level page table layout, for example when using
- * 64-bit PTEs and 4K pages.
- */
-#define PAGETABLE_LEVELS 3
-
-#define PTE_MAGNITUDE 3 /* 64-bit PTEs on SH-X2 TLB */
-
-/* PGD bits */
-#define PGDIR_SHIFT 30
-
-#define PTRS_PER_PGD 4
-#define USER_PTRS_PER_PGD 2
-
-/* PMD bits */
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-#define PTRS_PER_PMD ((1 << PGDIR_SHIFT) / PMD_SIZE)
-
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
-
-typedef union {
- struct {
- unsigned long pmd_low;
- unsigned long pmd_high;
- };
- unsigned long long pmd;
-} pmd_t;
-#define pmd_val(x) ((x).pmd)
-#define __pmd(x) ((pmd_t) { .pmd = (x) } )
-
-static inline pmd_t *pud_pgtable(pud_t pud)
-{
- return (pmd_t *)(unsigned long)pud_val(pud);
-}
-
-/* only used by the stubbed out hugetlb gup code, should never be called */
-#define pud_page(pud) NULL
-#define pud_none(x) (!pud_val(x))
-#define pud_present(x) (pud_val(x))
-#define pud_clear(xp) do { set_pud(xp, __pud(0)); } while (0)
-#define pud_bad(x) (pud_val(x) & ~PAGE_MASK)
-
-/*
- * (puds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
-
-#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
deleted file mode 100644
index 3ce30becf6dfa9..00000000000000
--- a/arch/sh/include/asm/pgtable.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * This file contains the functions and defines necessary to modify and
- * use the SuperH page table tree.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#ifndef __ASM_SH_PGTABLE_H
-#define __ASM_SH_PGTABLE_H
-
-#ifdef CONFIG_X2TLB
-#include <asm/pgtable-3level.h>
-#else
-#include <asm/pgtable-2level.h>
-#endif
-#include <asm/page.h>
-#include <asm/mmu.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/addrspace.h>
-#include <asm/fixmap.h>
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Effective and physical address definitions, to aid with sign
- * extension.
- */
-#define NEFF 32
-#define NEFF_SIGN (1LL << (NEFF - 1))
-#define NEFF_MASK (-1LL << NEFF)
-
-static inline unsigned long long neff_sign_extend(unsigned long val)
-{
- unsigned long long extended = val;
- return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
-}
-
-#ifdef CONFIG_29BIT
-#define NPHYS 29
-#else
-#define NPHYS 32
-#endif
-
-#define NPHYS_SIGN (1LL << (NPHYS - 1))
-#define NPHYS_MASK (-1LL << NPHYS)
-
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* Entries per level */
-#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-
-#define PHYS_ADDR_MASK29 0x1fffffff
-#define PHYS_ADDR_MASK32 0xffffffff
-
-static inline unsigned long phys_addr_mask(void)
-{
- /* Is the MMU in 29bit mode? */
- if (__in_29bit_mode())
- return PHYS_ADDR_MASK29;
-
- return PHYS_ADDR_MASK32;
-}
-
-#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
-#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
-
-#define VMALLOC_START (P3SEG)
-#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
-
-#include <asm/pgtable_32.h>
-
-/*
- * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
- * protection for execute, and considers it the same as a read. Also, write
- * permission implies read permission. This is the closest we can get..
- *
- * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
- * not only supporting separate execute, read, and write bits, but having
- * completely separate permission bits for user and kernel space.
- */
- /*xwr*/
-
-typedef pte_t *pte_addr_t;
-
-#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
-
-struct vm_area_struct;
-struct mm_struct;
-
-extern void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-extern void __update_tlb(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-
-static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
-{
- pte_t pte = *ptep;
- __update_cache(vma, address, pte);
- __update_tlb(vma, address, pte);
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-extern void page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd);
-
-static inline bool __pte_access_permitted(pte_t pte, u64 prot)
-{
- return (pte_val(pte) & (prot | _PAGE_SPECIAL)) == prot;
-}
-
-#ifdef CONFIG_X2TLB
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT;
-
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_USER_READ);
- if (write)
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
- return __pte_access_permitted(pte, prot);
-}
-#else
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT | _PAGE_USER;
-
- if (write)
- prot |= _PAGE_RW;
- return __pte_access_permitted(pte, prot);
-}
-#endif
-
-#define pte_access_permitted pte_access_permitted
-
-/* arch/sh/mm/mmap.c */
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
deleted file mode 100644
index d0240decacca7f..00000000000000
--- a/arch/sh/include/asm/pgtable_32.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- * In order to keep this relatively clean, do not use these for defining
- * SH-3 specific flags until all of the other unused bits have been
- * exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- * Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- * and timing control which (together with bit 0) are moved into the
- * old-style PTEA on the parts that support it.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */
-#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
-#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
-#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
-#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
-#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
-#define _PAGE_PROTNONE 0x200 /* software: if not present */
-#define _PAGE_ACCESSED 0x400 /* software: page referenced */
-#define _PAGE_SPECIAL 0x800 /* software: special page */
-
-#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */
-
-#define _PAGE_EXT_WIRED 0x4000 /* software: Wire TLB entry */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
-
-#ifdef CONFIG_X2TLB
-#define _PAGE_PCC_MASK 0x00000000 /* No legacy PTEA support */
-#else
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */
-
-#define _PAGE_PCC_MASK 0xe0000001
-
-/* copy the ptea attributes */
-static inline unsigned long copy_ptea_attributes(unsigned long x)
-{
- return ((x >> 28) & 0xe) | (x & 0x1);
-}
-#endif
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \
- _PAGE_SZ1 | _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \
- _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK (phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if !defined(CONFIG_MMU)
-# define _PAGE_FLAGS_HARD 0ULL
-#elif defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-# define _PAGE_WIRED (_PAGE_EXT(_PAGE_EXT_WIRED))
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-# define _PAGE_WIRED (0)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD)
-#endif
-
-/*
- * Mask of bits that are to be preserved across pgprot changes.
- */
-#define _PAGE_CHG_MASK \
- (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_SPECIAL)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_EXEC | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY PAGE_EXECREAD
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_USER_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
- _PAGE_CACHABLE | _PAGE_ACCESSED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD PAGE_READONLY
-#define PAGE_RWX PAGE_SHARED
-#define PAGE_WRITEONLY PAGE_SHARED
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
- (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
- (type))
-#else /* no mmu */
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_EXECREAD __pgprot(0)
-#define PAGE_RWX __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_WRITEONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-#define PAGE_KERNEL_NOCACHE __pgprot(0)
-#define PAGE_KERNEL_RO __pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
- ptep->pte_high = pte.pte_high;
- smp_wmb();
- ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
- __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
- __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x) (!pte_val(x))
-#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x))
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED)
-#define pte_special(pte) ((pte).pte_low & _PAGE_SPECIAL)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte) \
- ((pte).pte_high & (_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE))
-#else
-#define pte_write(pte) ((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~(_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE));
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
- __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
- pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
- return pte;
-}
-
-static inline unsigned long pmd_page_vaddr(pmd_t pmd)
-{
- return (unsigned long)pmd_val(pmd);
-}
-
-#define pmd_pfn(pmd) (__pa(pmd_val(pmd)) >> PAGE_SHIFT)
-#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
- &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- * _PAGE_PRESENT at bit 8
- * _PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- * and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x) ((x).val & 0x1f)
-#define __swp_offset(x) ((x).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
-
-#else
-#define __swp_type(x) ((x).val & 0xff)
-#define __swp_offset(x) ((x).val >> 10)
-#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/arch/sh/include/asm/platform_early.h b/arch/sh/include/asm/platform_early.h
deleted file mode 100644
index fc802137c37d43..00000000000000
--- a/arch/sh/include/asm/platform_early.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX--License-Identifier: GPL-2.0 */
-
-#ifndef __PLATFORM_EARLY__
-#define __PLATFORM_EARLY__
-
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-
-struct sh_early_platform_driver {
- const char *class_str;
- struct platform_driver *pdrv;
- struct list_head list;
- int requested_id;
- char *buffer;
- int bufsize;
-};
-
-#define EARLY_PLATFORM_ID_UNSET -2
-#define EARLY_PLATFORM_ID_ERROR -3
-
-extern int sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf);
-extern void sh_early_platform_add_devices(struct platform_device **devs, int num);
-
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return !pdev->dev.driver;
-}
-
-extern void sh_early_platform_driver_register_all(char *class_str);
-extern int sh_early_platform_driver_probe(char *class_str,
- int nr_probe, int user_only);
-
-#define sh_early_platform_init(class_string, platdrv) \
- sh_early_platform_init_buffer(class_string, platdrv, NULL, 0)
-
-#ifndef MODULE
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static __initdata struct sh_early_platform_driver early_driver = { \
- .class_str = class_string, \
- .buffer = buf, \
- .bufsize = bufsiz, \
- .pdrv = platdrv, \
- .requested_id = EARLY_PLATFORM_ID_UNSET, \
-}; \
-static int __init sh_early_platform_driver_setup_func(char *buffer) \
-{ \
- return sh_early_platform_driver_register(&early_driver, buffer); \
-} \
-early_param(class_string, sh_early_platform_driver_setup_func)
-#else /* MODULE */
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static inline char *sh_early_platform_driver_setup_func(void) \
-{ \
- return bufsiz ? buf : NULL; \
-}
-#endif /* MODULE */
-
-#endif /* __PLATFORM_EARLY__ */
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
deleted file mode 100644
index f8982b757c33ac..00000000000000
--- a/arch/sh/include/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
deleted file mode 100644
index 85a6c1c3c16e70..00000000000000
--- a/arch/sh/include/asm/processor.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-#include <asm/cache.h>
-
-#ifndef __ASSEMBLY__
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- *
- * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- * for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
- /* SH-2 types */
- CPU_SH7619, CPU_J2,
-
- /* SH-2A types */
- CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
- CPU_MXG,
-
- /* SH-3 types */
- CPU_SH7705, CPU_SH7706, CPU_SH7707,
- CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
- CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
- /* SH-4 types */
- CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
- CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
- /* SH-4A types */
- CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
- CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SH7734, CPU_SHX3,
-
- /* SH4AL-DSP types */
- CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
-
- /* Unknown subtype */
- CPU_SH_NONE
-};
-
-enum cpu_family {
- CPU_FAMILY_SH2,
- CPU_FAMILY_SH2A,
- CPU_FAMILY_SH3,
- CPU_FAMILY_SH4,
- CPU_FAMILY_SH4A,
- CPU_FAMILY_SH4AL_DSP,
- CPU_FAMILY_UNKNOWN,
-};
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
- unsigned long long next;
- unsigned long long first;
- unsigned long long last;
-
- unsigned int entries;
- unsigned int step;
-
- unsigned long flags;
-};
-
-struct sh_cpuinfo {
- unsigned int type, family;
- int cut_major, cut_minor;
- unsigned long loops_per_jiffy;
- unsigned long asid_cache;
-
- struct cache_info icache; /* Primary I-cache */
- struct cache_info dcache; /* Primary D-cache */
- struct cache_info scache; /* Secondary cache */
-
- /* TLB info */
- struct tlb_info itlb;
- struct tlb_info dtlb;
-
- unsigned int phys_bits;
- unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax() barrier()
-
-void default_idle(void);
-void stop_this_cpu(void *);
-
-/* Forward decl */
-struct seq_operations;
-struct task_struct;
-
-extern struct pt_regs fake_swapper_regs;
-
-extern void cpu_init(void);
-extern void cpu_probe(void);
-
-/* arch/sh/kernel/process.c */
-extern unsigned int xstate_size;
-extern void free_thread_xstate(struct task_struct *);
-extern struct kmem_cache *task_xstate_cachep;
-
-/* arch/sh/mm/alignment.c */
-extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
-extern int set_unalign_ctl(struct task_struct *, unsigned int val);
-
-#define GET_UNALIGN_CTL(tsk, addr) get_unalign_ctl((tsk), (addr))
-#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val))
-
-/* arch/sh/mm/init.c */
-extern unsigned int mem_init_done;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-extern const struct seq_operations cpuinfo_op;
-
-/* thread_struct flags */
-#define SH_THREAD_UAC_NOPRINT (1 << 0)
-#define SH_THREAD_UAC_SIGBUS (1 << 1)
-#define SH_THREAD_UAC_MASK (SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
-
-/* processor boot mode configuration */
-#define MODE_PIN0 (1 << 0)
-#define MODE_PIN1 (1 << 1)
-#define MODE_PIN2 (1 << 2)
-#define MODE_PIN3 (1 << 3)
-#define MODE_PIN4 (1 << 4)
-#define MODE_PIN5 (1 << 5)
-#define MODE_PIN6 (1 << 6)
-#define MODE_PIN7 (1 << 7)
-#define MODE_PIN8 (1 << 8)
-#define MODE_PIN9 (1 << 9)
-#define MODE_PIN10 (1 << 10)
-#define MODE_PIN11 (1 << 11)
-#define MODE_PIN12 (1 << 12)
-#define MODE_PIN13 (1 << 13)
-#define MODE_PIN14 (1 << 14)
-#define MODE_PIN15 (1 << 15)
-
-int generic_mode_pins(void);
-int test_mode_pin(int pin);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#else
-#define instruction_size(insn) (2)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/processor_32.h>
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
deleted file mode 100644
index 27aebf1e75a200..00000000000000
--- a/arch/sh/include/asm/processor_32.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/hw_breakpoint.h>
-
-/* Core Processor Version Register */
-#define CCN_PVR 0xff000030
-#define CCN_CVR 0xff000040
-#define CCN_PRR 0xff000044
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE 0x7c000000UL
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- * When it's set, it means the processor doesn't have right to use FPU,
- * and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- * Interrupt level mask
- */
-#define SR_DSP 0x00001000
-#define SR_IMASK 0x000000f0
-#define SR_FD 0x00008000
-#define SR_MD 0x40000000
-
-/*
- * DSP structure and data
- */
-struct sh_dsp_struct {
- unsigned long dsp_regs[14];
- long status;
-};
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- long status; /* software status information */
-};
-
-/* Dummy fpu emulator */
-struct sh_fpu_soft_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- unsigned char lookahead;
- unsigned long entry_pc;
-};
-
-union thread_xstate {
- struct sh_fpu_hard_struct hardfpu;
- struct sh_fpu_soft_struct softfpu;
-};
-
-struct thread_struct {
- /* Saved registers when thread is descheduled */
- unsigned long sp;
- unsigned long pc;
-
- /* Various thread flags, see SH_THREAD_xxx */
- unsigned long flags;
-
- /* Save middle states of ptrace breakpoints */
- struct perf_event *ptrace_bps[HBP_NUM];
-
-#ifdef CONFIG_SH_DSP
- /* Dsp status information */
- struct sh_dsp_struct dsp_status;
-#endif
-
- /* Extended processor state */
- union thread_xstate *xstate;
-
- /*
- * fpu_counter contains the number of consecutive context switches
- * that the FPU is used. If this is over a threshold, the lazy fpu
- * saving becomes unlazy to save the trap. This is an unsigned char
- * so that after 256 times the counter wraps and the behavior turns
- * lazy again; this to deal with bursty apps that only use FPU for
- * a short time
- */
- unsigned char fpu_counter;
-};
-
-#define INIT_THREAD { \
- .sp = sizeof(init_stack) + (long) &init_stack, \
- .flags = 0, \
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Set FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "or %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Clear out FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "and %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT 0x00080000
-
-#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */
-#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk) (tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl);
-
-#ifdef CONFIG_DUMP_CODE
-void show_code(struct pt_regs *regs);
-#else
-static inline void show_code(struct pt_regs *regs)
-{
-}
-#endif
-
-extern unsigned long __get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15])
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-
-#define PREFETCH_STRIDE L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-
-static inline void prefetch(const void *x)
-{
- __builtin_prefetch(x, 0, 3);
-}
-
-static inline void prefetchw(const void *x)
-{
- __builtin_prefetch(x, 1, 3);
-}
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
deleted file mode 100644
index 6c89e3e04cee7f..00000000000000
--- a/arch/sh/include/asm/ptrace.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-
-#include <linux/stringify.h>
-#include <linux/stddef.h>
-#include <linux/thread_info.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <uapi/asm/ptrace.h>
-
-#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
-#define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15])
-
-static inline unsigned long instruction_pointer(struct pt_regs *regs)
-{
- return regs->pc;
-}
-static inline void instruction_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->pc = val;
-}
-
-static inline unsigned long frame_pointer(struct pt_regs *regs)
-{
- return regs->regs[14];
-}
-
-static inline unsigned long user_stack_pointer(struct pt_regs *regs)
-{
- return regs->regs[15];
-}
-
-static inline void user_stack_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->regs[15] = val;
-}
-
-#define arch_has_single_step() (1)
-
-/*
- * kprobe-based event tracer support
- */
-struct pt_regs_offset {
- const char *name;
- int offset;
-};
-
-#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
-#define REGS_OFFSET_NAME(num) \
- {.name = __stringify(r##num), .offset = offsetof(struct pt_regs, regs[num])}
-#define TREGS_OFFSET_NAME(num) \
- {.name = __stringify(tr##num), .offset = offsetof(struct pt_regs, tregs[num])}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-/* Query offset/name of register from its name/offset */
-extern int regs_query_register_offset(const char *name);
-extern const char *regs_query_register_name(unsigned int offset);
-
-extern const struct pt_regs_offset regoffset_table[];
-
-/**
- * regs_get_register() - get register value from its offset
- * @regs: pt_regs from which register value is gotten.
- * @offset: offset number of the register.
- *
- * regs_get_register returns the value of a register. The @offset is the
- * offset of the register in struct pt_regs address which specified by @regs.
- * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
- */
-static inline unsigned long regs_get_register(struct pt_regs *regs,
- unsigned int offset)
-{
- if (unlikely(offset > MAX_REG_OFFSET))
- return 0;
- return *(unsigned long *)((unsigned long)regs + offset);
-}
-
-/**
- * regs_within_kernel_stack() - check the address in the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @addr: address which is checked.
- *
- * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
- * If @addr is within the kernel stack, it returns true. If not, returns false.
- */
-static inline int regs_within_kernel_stack(struct pt_regs *regs,
- unsigned long addr)
-{
- return ((addr & ~(THREAD_SIZE - 1)) ==
- (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
-}
-
-/**
- * regs_get_kernel_stack_nth() - get Nth entry of the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @n: stack entry number.
- *
- * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
- * this returns 0.
- */
-static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
- unsigned int n)
-{
- unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
- addr += n;
- if (regs_within_kernel_stack(regs, (unsigned long)addr))
- return *addr;
- else
- return 0;
-}
-
-struct perf_event;
-struct perf_sample_data;
-
-extern void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs);
-
-#define task_pt_regs(task) \
- ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
- unsigned long pc = regs->pc;
-
- if (virt_addr_uncached(pc))
- return CAC_ADDR(pc);
-
- return pc;
-}
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h
deleted file mode 100644
index 5f37ad7c60652b..00000000000000
--- a/arch/sh/include/asm/ptrace_32.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PTRACE_32_H
-#define __ASM_SH_PTRACE_32_H
-
-#include <uapi/asm/ptrace_32.h>
-
-
-#define MAX_REG_OFFSET offsetof(struct pt_regs, tra)
-static inline long regs_return_value(struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-#endif /* __ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h
deleted file mode 100644
index c5f072572fd18a..00000000000000
--- a/arch/sh/include/asm/push-switch.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PUSH_SWITCH_H
-#define __ASM_SH_PUSH_SWITCH_H
-
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-struct push_switch {
- /* switch state */
- unsigned int state:1;
- /* debounce timer */
- struct timer_list debounce;
- /* workqueue */
- struct work_struct work;
- /* platform device, for workqueue handler */
- struct platform_device *pdev;
-};
-
-struct push_switch_platform_info {
- /* IRQ handler */
- irqreturn_t (*irq_handler)(int irq, void *data);
- /* Special IRQ flags */
- unsigned int irq_flags;
- /* Bit location of switch */
- unsigned int bit;
- /* Symbolic switch name */
- const char *name;
-};
-
-#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/arch/sh/include/asm/reboot.h b/arch/sh/include/asm/reboot.h
deleted file mode 100644
index 5c445c90df14d9..00000000000000
--- a/arch/sh/include/asm/reboot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_REBOOT_H
-#define __ASM_SH_REBOOT_H
-
-#include <linux/kdebug.h>
-
-struct pt_regs;
-
-struct machine_ops {
- void (*restart)(char *cmd);
- void (*halt)(void);
- void (*power_off)(void);
- void (*shutdown)(void);
- void (*crash_shutdown)(struct pt_regs *);
-};
-
-extern struct machine_ops machine_ops;
-
-/* arch/sh/kernel/machine_kexec.c */
-void native_machine_crash_shutdown(struct pt_regs *regs);
-
-#endif /* __ASM_SH_REBOOT_H */
diff --git a/arch/sh/include/asm/romimage-macros.h b/arch/sh/include/asm/romimage-macros.h
deleted file mode 100644
index f9352ee7c21b4b..00000000000000
--- a/arch/sh/include/asm/romimage-macros.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ROMIMAGE_MACRO_H
-#define __ROMIMAGE_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.l r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.w r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.b r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro WAIT, time
- mov.l 2f, r3
-1 :
- nop
- tst r3, r3
- bf/s 1b
- dt r3
- bra 3f
- nop
- .align 2
-2 : .long \time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro DD, addr, addr2, nr
- mov.l 1f, r1
- mov.l @r1, r0
- bra 2f
- nop
- .align 2
-1 : .long \addr
-2 :
-.endm
-
-#endif /* __ROMIMAGE_MACRO_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
deleted file mode 100644
index 69dbae2949b0dd..00000000000000
--- a/arch/sh/include/asm/rtc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-void time_init(void);
-
-#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
-
-struct sh_rtc_platform_info {
- unsigned long capabilities;
-};
-
-#include <cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
deleted file mode 100644
index d4578395fd665c..00000000000000
--- a/arch/sh/include/asm/seccomp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SECCOMP_H
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define __SECCOMP_ARCH_LE __AUDIT_ARCH_LE
-#else
-#define __SECCOMP_ARCH_LE 0
-#endif
-
-#define SECCOMP_ARCH_NATIVE (AUDIT_ARCH_SH | __SECCOMP_ARCH_LE)
-#define SECCOMP_ARCH_NATIVE_NR NR_syscalls
-#define SECCOMP_ARCH_NATIVE_NAME "sh"
-
-#endif /* __ASM_SECCOMP_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
deleted file mode 100644
index 0cb0ca149ac34a..00000000000000
--- a/arch/sh/include/asm/sections.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SECTIONS_H
-#define __ASM_SH_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char __machvec_start[], __machvec_end[];
-extern char __uncached_start, __uncached_end;
-extern char __start_eh_frame[], __stop_eh_frame[];
-
-#endif /* __ASM_SH_SECTIONS_H */
-
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
deleted file mode 100644
index fc807011187fa1..00000000000000
--- a/arch/sh/include/asm/setup.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _SH_SETUP_H
-#define _SH_SETUP_H
-
-#include <uapi/asm/setup.h>
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-void sh_mv_setup(void);
-void check_for_initrd(void);
-void per_cpu_trap_init(void);
-
-#endif /* _SH_SETUP_H */
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
deleted file mode 100644
index 2d2423478b71d4..00000000000000
--- a/arch/sh/include/asm/sfp-machine.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * Machine-dependent software floating-point definitions.
- SuperH kernel version.
- Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
- Contributed by Richard Henderson (rth@cygnus.com),
- Jakub Jelinek (jj@ultra.linux.cz),
- David S. Miller (davem@redhat.com) and
- Peter Maydell (pmaydell@chiark.greenend.org.uk).
-*/
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __LITTLE_ENDIAN 0
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __BIG_ENDIAN 0
-#endif
-
-#define _FP_W_TYPE_SIZE 32
-#define _FP_W_TYPE unsigned long
-#define _FP_WS_TYPE signed long
-#define _FP_I_TYPE long
-
-#define _FP_MUL_MEAT_S(R,X,Y) \
- _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y) \
- _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y) \
- _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S 0
-#define _FP_NANSIGN_D 0
-#define _FP_NANSIGN_Q 0
-
-#define _FP_KEEPNANFRACP 1
-
-/*
- * If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
- do { \
- if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \
- && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \
- { \
- R##_s = Y##_s; \
- _FP_FRAC_COPY_##wc(R,Y); \
- } \
- else \
- { \
- R##_s = X##_s; \
- _FP_FRAC_COPY_##wc(R,X); \
- } \
- R##_c = FP_CLS_NAN; \
- } while (0)
-
-//#define FP_ROUNDMODE FPSCR_RM
-#define FP_DENORM_ZERO 1/*FPSCR_DN*/
-
-/* Exception flags. */
-#define FP_EX_INVALID (1<<4)
-#define FP_EX_DIVZERO (1<<3)
-#define FP_EX_OVERFLOW (1<<2)
-#define FP_EX_UNDERFLOW (1<<1)
-#define FP_EX_INEXACT (1<<0)
-
-#endif
-
diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
deleted file mode 100644
index 2d9433d7540299..00000000000000
--- a/arch/sh/include/asm/sh7760fb.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef _ASM_SH_SH7760FB_H
-#define _ASM_SH_SH7760FB_H
-
-/*
- * some bits of the colormap registers should be written as zero.
- * create a mask for that.
- */
-#define SH7760FB_PALETTE_MASK 0x00f8fcf8
-
-/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
-#define SH7760FB_DMA_MASK 0x0C000000
-
-/* palette */
-#define LDPR(x) (((x) << 2))
-
-/* framebuffer registers and bits */
-#define LDICKR 0x400
-#define LDMTR 0x402
-/* see sh7760fb.h for LDMTR bits */
-#define LDDFR 0x404
-#define LDDFR_PABD (1 << 8)
-#define LDDFR_COLOR_MASK 0x7F
-#define LDSMR 0x406
-#define LDSMR_ROT (1 << 13)
-#define LDSARU 0x408
-#define LDSARL 0x40c
-#define LDLAOR 0x410
-#define LDPALCR 0x412
-#define LDPALCR_PALS (1 << 4)
-#define LDPALCR_PALEN (1 << 0)
-#define LDHCNR 0x414
-#define LDHSYNR 0x416
-#define LDVDLNR 0x418
-#define LDVTLNR 0x41a
-#define LDVSYNR 0x41c
-#define LDACLNR 0x41e
-#define LDINTR 0x420
-#define LDPMMR 0x424
-#define LDPSPR 0x426
-#define LDCNTR 0x428
-#define LDCNTR_DON (1 << 0)
-#define LDCNTR_DON2 (1 << 4)
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define LDLIRNR 0x440
-/* LDINTR bit */
-# define LDINTR_MINTEN (1 << 15)
-# define LDINTR_FINTEN (1 << 14)
-# define LDINTR_VSINTEN (1 << 13)
-# define LDINTR_VEINTEN (1 << 12)
-# define LDINTR_MINTS (1 << 11)
-# define LDINTR_FINTS (1 << 10)
-# define LDINTR_VSINTS (1 << 9)
-# define LDINTR_VEINTS (1 << 8)
-# define VINT_START (LDINTR_VSINTEN)
-# define VINT_CHECK (LDINTR_VSINTS)
-#else
-/* LDINTR bit */
-# define LDINTR_VINTSEL (1 << 12)
-# define LDINTR_VINTE (1 << 8)
-# define LDINTR_VINTS (1 << 0)
-# define VINT_START (LDINTR_VINTSEL)
-# define VINT_CHECK (LDINTR_VINTS)
-#endif
-
-/* HSYNC polarity inversion */
-#define LDMTR_FLMPOL (1 << 15)
-
-/* VSYNC polarity inversion */
-#define LDMTR_CL1POL (1 << 14)
-
-/* DISPLAY-ENABLE polarity inversion */
-#define LDMTR_DISPEN_LOWACT (1 << 13)
-
-/* DISPLAY DATA BUS polarity inversion */
-#define LDMTR_DPOL_LOWACT (1 << 12)
-
-/* AC modulation signal enable */
-#define LDMTR_MCNT (1 << 10)
-
-/* Disable output of HSYNC during VSYNC period */
-#define LDMTR_CL1CNT (1 << 9)
-
-/* Disable output of VSYNC during VSYNC period */
-#define LDMTR_CL2CNT (1 << 8)
-
-/* Display types supported by the LCDC */
-#define LDMTR_STN_MONO_4 0x00
-#define LDMTR_STN_MONO_8 0x01
-#define LDMTR_STN_COLOR_4 0x08
-#define LDMTR_STN_COLOR_8 0x09
-#define LDMTR_STN_COLOR_12 0x0A
-#define LDMTR_STN_COLOR_16 0x0B
-#define LDMTR_DSTN_MONO_8 0x11
-#define LDMTR_DSTN_MONO_16 0x13
-#define LDMTR_DSTN_COLOR_8 0x19
-#define LDMTR_DSTN_COLOR_12 0x1A
-#define LDMTR_DSTN_COLOR_16 0x1B
-#define LDMTR_TFT_COLOR_16 0x2B
-
-/* framebuffer color layout */
-#define LDDFR_1BPP_MONO 0x00
-#define LDDFR_2BPP_MONO 0x01
-#define LDDFR_4BPP_MONO 0x02
-#define LDDFR_6BPP_MONO 0x04
-#define LDDFR_4BPP 0x0A
-#define LDDFR_8BPP 0x0C
-#define LDDFR_16BPP_RGB555 0x1D
-#define LDDFR_16BPP_RGB565 0x2D
-
-/* LCDC Pixclock sources */
-#define LCDC_CLKSRC_BUSCLOCK 0
-#define LCDC_CLKSRC_PERIPHERAL 1
-#define LCDC_CLKSRC_EXTERNAL 2
-
-#define LDICKR_CLKSRC(x) \
- (((x) & 3) << 12)
-
-/* LCDC pixclock input divider. Set to 1 at a minimum! */
-#define LDICKR_CLKDIV(x) \
- ((x) & 0x1f)
-
-struct sh7760fb_platdata {
-
- /* Set this member to a valid fb_videmode for the display you
- * wish to use. The following members must be initialized:
- * xres, yres, hsync_len, vsync_len, sync,
- * {left,right,upper,lower}_margin.
- * The driver uses the above members to calculate register values
- * and memory requirements. Other members are ignored but may
- * be used by other framebuffer layer components.
- */
- struct fb_videomode *def_mode;
-
- /* LDMTR includes display type and signal polarity. The
- * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
- * data above; however the polarities of the following signals
- * must be encoded in the ldmtr member:
- * Display Enable signal (default high-active) DISPEN_LOWACT
- * Display Data signals (default high-active) DPOL_LOWACT
- * AC Modulation signal (default off) MCNT
- * Hsync-During-Vsync suppression (default off) CL1CNT
- * Vsync-during-vsync suppression (default off) CL2CNT
- * NOTE: also set a display type!
- * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
- */
- u16 ldmtr;
-
- /* LDDFR controls framebuffer image format (depth, organization)
- * Use ONE of the LDDFR_?BPP_* macros!
- */
- u16 lddfr;
-
- /* LDPMMR and LDPSPR control the timing of the power signals
- * for the display. Please read the SH7760 Hardware Manual,
- * Chapters 30.3.17, 30.3.18 and 30.4.6!
- */
- u16 ldpmmr;
- u16 ldpspr;
-
- /* LDACLNR contains the line numbers after which the AC modulation
- * signal is to toggle. Set to ZERO for TFTs or displays which
- * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
- */
- u16 ldaclnr;
-
- /* LDICKR contains information on pixelclock source and config.
- * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
- * minimal value for CLKDIV() must be 1!.
- */
- u16 ldickr;
-
- /* set this member to 1 if you wish to use the LCDC's hardware
- * rotation function. This is limited to displays <= 320x200
- * pixels resolution!
- */
- int rotate; /* set to 1 to rotate 90 CCW */
-
- /* set this to 1 to suppress vsync irq use. */
- int novsync;
-
- /* blanking hook for platform. Set this if your platform can do
- * more than the LCDC in terms of blanking (e.g. disable clock
- * generator / backlight power supply / etc.
- */
- void (*blank) (int);
-};
-
-#endif /* _ASM_SH_SH7760FB_H */
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
deleted file mode 100644
index ab693b9824421d..00000000000000
--- a/arch/sh/include/asm/sh_bios.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BIOS_H
-#define __ASM_SH_BIOS_H
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-
-/*
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * C API to interface to the standard LinuxSH BIOS
- * usually from within the early stages of kernel boot.
- */
-extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_gdb_detach(void);
-
-extern void sh_bios_get_node_addr(unsigned char *node_addr);
-extern void sh_bios_shutdown(unsigned int how);
-
-extern void sh_bios_vbr_init(void);
-extern void sh_bios_vbr_reload(void);
-
-#else
-
-static inline void sh_bios_vbr_init(void) { }
-static inline void sh_bios_vbr_reload(void) { }
-
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h
deleted file mode 100644
index 6c580a644a78c6..00000000000000
--- a/arch/sh/include/asm/shmparam.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#ifndef __ASM_SH_SHMPARAM_H
-#define __ASM_SH_SHMPARAM_H
-
-/*
- * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
- * for everyone, and work out the specifics from the probed cache descriptor.
- */
-#define SHMLBA 0x4000 /* attach addr a multiple of this */
-
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h
deleted file mode 100644
index 35e4839d381e88..00000000000000
--- a/arch/sh/include/asm/siu.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * platform header for the SIU ASoC driver
- *
- * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#ifndef ASM_SIU_H
-#define ASM_SIU_H
-
-struct device;
-
-struct siu_platform {
- unsigned int dma_slave_tx_a;
- unsigned int dma_slave_rx_a;
- unsigned int dma_slave_tx_b;
- unsigned int dma_slave_rx_b;
-};
-
-#endif /* ASM_SIU_H */
diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
deleted file mode 100644
index 891f2f8f2fd03a..00000000000000
--- a/arch/sh/include/asm/smc37c93x.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMC37C93X_H
-#define __ASM_SH_SMC37C93X_H
-
-/*
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE 0x3f0
-#define IDE1_PRIMARY_BASE 0x1f0
-#define IDE1_SECONDARY_BASE 0x170
-#define PARPORT_PRIMARY_BASE 0x378
-#define COM1_PRIMARY_BASE 0x2f8
-#define COM2_PRIMARY_BASE 0x3f8
-#define RTC_PRIMARY_BASE 0x070
-#define KBC_PRIMARY_BASE 0x060
-#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
-
-/* Logical device number */
-#define LDN_FDC 0
-#define LDN_IDE1 1
-#define LDN_IDE2 2
-#define LDN_PARPORT 3
-#define LDN_COM1 4
-#define LDN_COM2 5
-#define LDN_RTC 6
-#define LDN_KBC 7
-#define LDN_AUXIO 8
-
-/* Configuration port and key */
-#define CONFIG_PORT 0x3f0
-#define INDEX_PORT CONFIG_PORT
-#define DATA_PORT 0x3f1
-#define CONFIG_ENTER 0x55
-#define CONFIG_EXIT 0xaa
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX 0x07
-#define POWER_CONTROL_INDEX 0x22
-#define ACTIVATE_INDEX 0x30
-#define IO_BASE_HI_INDEX 0x60
-#define IO_BASE_LO_INDEX 0x61
-#define IRQ_SELECT_INDEX 0x70
-#define DMA_SELECT_INDEX 0x74
-
-#define GPIO46_INDEX 0xc6
-#define GPIO47_INDEX 0xc7
-
-/* UART stuff. Only for debugging. */
-/* UART Register */
-
-#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
-#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
-#define UART_IER 0x2 /* Interrupt Enable Register */
-#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
-#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
-#define UART_LCR 0x6 /* Line Control Register */
-#define UART_MCR 0x8 /* MODEM Control Register */
-#define UART_LSR 0xa /* Line Status Register */
-#define UART_MSR 0xc /* MODEM Status Register */
-#define UART_SCR 0xe /* Scratch Register */
-#define UART_DLL 0x0 /* Divisor Latch (LS) */
-#define UART_DLM 0x2 /* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
- volatile __u16 rbr;
- volatile __u16 ier;
- volatile __u16 iir;
- volatile __u16 lcr;
- volatile __u16 mcr;
- volatile __u16 lsr;
- volatile __u16 msr;
- volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr rbr
-#define tcr iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll rbr
-#define dlm ier
-#define fcr iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
-#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
-#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
-#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
-#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
-#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
-#define IIR_FIFO 0xc000 /* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN 0x0100 /* FIFO enable */
-#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
-#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
-#define FCR_DMA 0x0800 /* DMA mode select */
-#define FCR_RTL 0x4000 /* Receiver trigger (LSB) */
-#define FCR_RTM 0x8000 /* Receiver trigger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
-#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
-#define LCR_STB 0x0400 /* Number of Stop Bits */
-#define LCR_PEN 0x0800 /* Parity Enable */
-#define LCR_EPS 0x1000 /* Even Parity Select */
-#define LCR_SP 0x2000 /* Stick Parity */
-#define LCR_SB 0x4000 /* Set Break */
-#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR 0x0100 /* Data Terminal Ready */
-#define MCR_RTS 0x0200 /* Request to Send */
-#define MCR_OUT1 0x0400 /* Out 1 */
-#define MCR_IRQEN 0x0800 /* IRQ Enable */
-#define MCR_LOOP 0x1000 /* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR 0x0100 /* Data Ready */
-#define LSR_OE 0x0200 /* Overrun Error */
-#define LSR_PE 0x0400 /* Parity Error */
-#define LSR_FE 0x0800 /* Framing Error */
-#define LSR_BI 0x1000 /* Break Interrupt */
-#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
-#define LSR_TEMT 0x4000 /* Transmitter Empty */
-#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS 0x0100 /* Delta Clear to Send */
-#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
-#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
-#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
-#define MSR_CTS 0x1000 /* Clear to Send */
-#define MSR_DSR 0x2000 /* Data Set Ready */
-#define MSR_RI 0x4000 /* Ring Indicator */
-#define MSR_DCD 0x8000 /* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK (1843200) /* 1.8432 MHz */
-#define UART_BAUD(x) (UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-#define RTC_FREQ_SELECT 10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only. */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL 11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif /* __ASM_SH_SMC37C93X_H */
diff --git a/arch/sh/include/asm/smp-ops.h b/arch/sh/include/asm/smp-ops.h
deleted file mode 100644
index e27702130eb6f3..00000000000000
--- a/arch/sh/include/asm/smp-ops.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_OPS_H
-#define __ASM_SH_SMP_OPS_H
-
-struct plat_smp_ops {
- void (*smp_setup)(void);
- unsigned int (*smp_processor_id)(void);
- void (*prepare_cpus)(unsigned int max_cpus);
- void (*start_cpu)(unsigned int cpu, unsigned long entry_point);
- void (*send_ipi)(unsigned int cpu, unsigned int message);
- int (*cpu_disable)(unsigned int cpu);
- void (*cpu_die)(unsigned int cpu);
- void (*play_dead)(void);
-};
-
-extern struct plat_smp_ops *mp_ops;
-extern struct plat_smp_ops shx3_smp_ops;
-
-#ifdef CONFIG_SMP
-
-static inline void plat_smp_setup(void)
-{
- BUG_ON(!mp_ops);
- mp_ops->smp_setup();
-}
-
-static inline void play_dead(void)
-{
- mp_ops->play_dead();
-}
-
-extern void register_smp_ops(struct plat_smp_ops *ops);
-
-#else
-
-static inline void plat_smp_setup(void)
-{
- /* UP, nothing to do ... */
-}
-
-static inline void register_smp_ops(struct plat_smp_ops *ops)
-{
-}
-
-static inline void play_dead(void)
-{
- BUG();
-}
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_OPS_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
deleted file mode 100644
index 199381f77293c7..00000000000000
--- a/arch/sh/include/asm/smp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_H
-#define __ASM_SH_SMP_H
-
-#include <linux/bitops.h>
-#include <linux/cpumask.h>
-#include <asm/smp-ops.h>
-
-#ifdef CONFIG_SMP
-
-#include <linux/atomic.h>
-#include <asm/current.h>
-#include <asm/percpu.h>
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-/* Map from cpu id to sequential logical cpu number. */
-extern int __cpu_number_map[NR_CPUS];
-#define cpu_number_map(cpu) __cpu_number_map[cpu]
-
-/* The reverse map from sequential logical cpu number to cpu id. */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
-
-enum {
- SMP_MSG_FUNCTION,
- SMP_MSG_RESCHEDULE,
- SMP_MSG_FUNCTION_SINGLE,
- SMP_MSG_TIMER,
-
- SMP_MSG_NR, /* must be last */
-};
-
-DECLARE_PER_CPU(int, cpu_state);
-
-void smp_message_recv(unsigned int msg);
-
-void arch_send_call_function_single_ipi(int cpu);
-void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-void native_play_dead(void);
-void native_cpu_die(unsigned int cpu);
-int native_cpu_disable(unsigned int cpu);
-
-#ifdef CONFIG_HOTPLUG_CPU
-void play_dead_common(void);
-extern int __cpu_disable(void);
-
-static inline void __cpu_die(unsigned int cpu)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- mp_ops->cpu_die(cpu);
-}
-#endif
-
-static inline int hard_smp_processor_id(void)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- if (!mp_ops)
- return 0; /* boot CPU */
-
- return mp_ops->smp_processor_id();
-}
-
-struct of_cpu_method {
- const char *method;
- struct plat_smp_ops *ops;
-};
-
-#define CPU_METHOD_OF_DECLARE(name, _method, _ops) \
- static const struct of_cpu_method __cpu_method_of_table_##name \
- __used __section("__cpu_method_of_table") \
- = { .method = _method, .ops = _ops }
-
-#else
-
-#define hard_smp_processor_id() (0)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_H */
diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h
deleted file mode 100644
index 4703cbe2384481..00000000000000
--- a/arch/sh/include/asm/sparsemem.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPARSEMEM_H
-#define __ASM_SH_SPARSEMEM_H
-
-/*
- * SECTION_SIZE_BITS 2^N: how big each section will be
- * MAX_PHYSMEM_BITS 2^N: how much physical address space we have
- */
-#define SECTION_SIZE_BITS 26
-#define MAX_PHYSMEM_BITS 32
-
-#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h
deleted file mode 100644
index 6780753bd24914..00000000000000
--- a/arch/sh/include/asm/spi.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SPI_H__
-#define __ASM_SPI_H__
-
-struct sh_spi_info;
-
-struct sh_spi_info {
- int bus_num;
- int num_chipselect;
-
- void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
-};
-
-#endif /* __ASM_SPI_H__ */
diff --git a/arch/sh/include/asm/spinlock-cas.h b/arch/sh/include/asm/spinlock-cas.h
deleted file mode 100644
index 3d49985ebf41c9..00000000000000
--- a/arch/sh/include/asm/spinlock-cas.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-cas.h
- *
- * Copyright (C) 2015 SEI
- */
-#ifndef __ASM_SH_SPINLOCK_CAS_H
-#define __ASM_SH_SPINLOCK_CAS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-static inline unsigned __sl_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- while (!__sl_cas(&lock->lock, 1, 0));
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- __sl_cas(&lock->lock, 0, 1);
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- return __sl_cas(&lock->lock, 1, 0);
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (!old || __sl_cas(&rw->lock, old, old-1) != old);
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (__sl_cas(&rw->lock, old, old+1) != old);
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- while (__sl_cas(&rw->lock, RW_LOCK_BIAS, 0) != RW_LOCK_BIAS);
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __sl_cas(&rw->lock, 0, RW_LOCK_BIAS);
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (old && __sl_cas(&rw->lock, old, old-1) != old);
- return !!old;
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- return __sl_cas(&rw->lock, RW_LOCK_BIAS, 0) == RW_LOCK_BIAS;
-}
-
-#endif /* __ASM_SH_SPINLOCK_CAS_H */
diff --git a/arch/sh/include/asm/spinlock-llsc.h b/arch/sh/include/asm/spinlock-llsc.h
deleted file mode 100644
index 7fd929cd2e7a08..00000000000000
--- a/arch/sh/include/asm/spinlock-llsc.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-llsc.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_LLSC_H
-#define __ASM_SH_SPINLOCK_LLSC_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-/*
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
- unsigned long oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_lock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "cmp/pl %1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
-
- /* This could be optimised with ARCH_HAS_MMIOWB */
- mmiowb();
- __asm__ __volatile__ (
- "mov #1, %0 ! arch_spin_unlock \n\t"
- "mov.l %0, @%1 \n\t"
- : "=&z" (tmp)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_trylock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-
- return oldval;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_lock \n\t"
- "cmp/pl %0 \n\t"
- "bf 1b \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_unlock \n\t"
- "add #1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_write_lock \n\t"
- "cmp/hs %2, %0 \n\t"
- "bf 1b \n\t"
- "sub %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __asm__ __volatile__ (
- "mov.l %1, @%0 ! arch_write_unlock \n\t"
- :
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_read_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/pl %0 \n\t"
- "bf 2f \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "2: \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-
- return (oldval > 0);
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_write_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/hs %3, %0 \n\t"
- "bf 2f \n\t"
- "sub %3, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-
- return (oldval > (RW_LOCK_BIAS - 1));
-}
-
-#endif /* __ASM_SH_SPINLOCK_LLSC_H */
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
deleted file mode 100644
index fa6801f63551ce..00000000000000
--- a/arch/sh/include/asm/spinlock.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_H
-#define __ASM_SH_SPINLOCK_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/spinlock-llsc.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/spinlock-cas.h>
-#else
-#error "The configured cpu type does not support spinlocks"
-#endif
-
-#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
deleted file mode 100644
index 907bda4b1619a9..00000000000000
--- a/arch/sh/include/asm/spinlock_types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPINLOCK_TYPES_H
-#define __ASM_SH_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
- volatile unsigned int lock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { 1 }
-
-typedef struct {
- volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define RW_LOCK_BIAS 0x01000000
-#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-
-#endif
diff --git a/arch/sh/include/asm/sram.h b/arch/sh/include/asm/sram.h
deleted file mode 100644
index c125cf2198683e..00000000000000
--- a/arch/sh/include/asm/sram.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SRAM_H
-#define __ASM_SRAM_H
-
-#ifdef CONFIG_HAVE_SRAM_POOL
-
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-
-/* arch/sh/mm/sram.c */
-extern struct gen_pool *sram_pool;
-
-static inline unsigned long sram_alloc(size_t len)
-{
- if (!sram_pool)
- return 0UL;
-
- return gen_pool_alloc(sram_pool, len);
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
- return gen_pool_free(sram_pool, addr, len);
-}
-
-#else
-
-static inline unsigned long sram_alloc(size_t len)
-{
- return 0;
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
-}
-
-#endif /* CONFIG_HAVE_SRAM_POOL */
-
-#endif /* __ASM_SRAM_H */
diff --git a/arch/sh/include/asm/stackprotector.h b/arch/sh/include/asm/stackprotector.h
deleted file mode 100644
index 665dafac376f8d..00000000000000
--- a/arch/sh/include/asm/stackprotector.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STACKPROTECTOR_H
-#define __ASM_SH_STACKPROTECTOR_H
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
- unsigned long canary = get_random_canary();
-
- current->stack_canary = canary;
- __stack_chk_guard = current->stack_canary;
-}
-
-#endif /* __ASM_SH_STACKPROTECTOR_H */
diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
deleted file mode 100644
index 4f98cdc64ec59b..00000000000000
--- a/arch/sh/include/asm/stacktrace.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based on:
- * The x86 implementation - arch/x86/include/asm/stacktrace.h
- */
-#ifndef _ASM_SH_STACKTRACE_H
-#define _ASM_SH_STACKTRACE_H
-
-/* Generic stack tracer with callbacks */
-
-struct stacktrace_ops {
- void (*address)(void *data, unsigned long address, int reliable);
-};
-
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
- unsigned long *stack,
- const struct stacktrace_ops *ops, void *data);
-
-#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
deleted file mode 100644
index 0f6331ec28ed4e..00000000000000
--- a/arch/sh/include/asm/string.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/string_32.h>
diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h
deleted file mode 100644
index a276b193d3b4fd..00000000000000
--- a/arch/sh/include/asm/string_32.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STRING_H
-#define __ASM_SH_STRING_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * But consider these trivial functions to be public domain.
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char *strcpy(char *__dest, const char *__src)
-{
- register char *__xdest = __dest;
- unsigned long __dummy;
-
- __asm__ __volatile__("1:\n\t"
- "mov.b @%1+, %2\n\t"
- "mov.b %2, @%0\n\t"
- "cmp/eq #0, %2\n\t"
- "bf/s 1b\n\t"
- " add #1, %0\n\t"
- : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
- : "0" (__dest), "1" (__src)
- : "memory", "t");
-
- return __xdest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *__cs, const char *__ct)
-{
- register int __res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq #0, %3\n\t"
- "bt 2f\n\t"
- "cmp/eq %2, %3\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n\t"
- "sub %3, %2\n"
- "2:"
- : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
-{
- register int __res;
- unsigned long __dummy;
-
- if (__n == 0)
- return 0;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq %6, %0\n\t"
- "bt/s 2f\n\t"
- " cmp/eq #0, %3\n\t"
- "bt/s 3f\n\t"
- " cmp/eq %3, %2\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n"
- "2:\n\t"
- "sub %3, %2\n"
- "3:"
- :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct), "r" (__cs+__n)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *__s, int __c, size_t __n);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#endif /* __ASM_SH_STRING_H */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
deleted file mode 100644
index 47db17520261e8..00000000000000
--- a/arch/sh/include/asm/suspend.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_SUSPEND_H
-#define _ASM_SH_SUSPEND_H
-
-#ifndef __ASSEMBLY__
-#include <linux/notifier.h>
-
-#include <asm/ptrace.h>
-
-struct swsusp_arch_regs {
- struct pt_regs user_regs;
- unsigned long bank1_regs[8];
-};
-
-void sh_mobile_call_standby(unsigned long mode);
-
-#ifdef CONFIG_CPU_IDLE
-int sh_mobile_setup_cpuidle(void);
-#else
-static inline int sh_mobile_setup_cpuidle(void) { return 0; }
-#endif
-
-/* notifier chains for pre/post sleep hooks */
-extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
-extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
-
-/* priority levels for notifiers */
-#define SH_MOBILE_SLEEP_BOARD 0
-#define SH_MOBILE_SLEEP_CPU 1
-#define SH_MOBILE_PRE(x) (x)
-#define SH_MOBILE_POST(x) (-(x))
-
-/* board code registration function for self-refresh assembly snippets */
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end);
-
-/* register structure for address/data information */
-struct sh_sleep_regs {
- unsigned long stbcr;
- unsigned long bar;
-
- /* MMU */
- unsigned long pteh;
- unsigned long ptel;
- unsigned long ttb;
- unsigned long tea;
- unsigned long mmucr;
- unsigned long ptea;
- unsigned long pascr;
- unsigned long irmcr;
-
- /* Cache */
- unsigned long ccr;
- unsigned long ramcr;
-};
-
-/* data area for low-level sleep code */
-struct sh_sleep_data {
- /* current sleep mode (SUSP_SH_...) */
- unsigned long mode;
-
- /* addresses of board specific self-refresh snippets */
- unsigned long sf_pre;
- unsigned long sf_post;
-
- /* address of resume code */
- unsigned long resume;
-
- /* register state saved and restored by the assembly code */
- unsigned long vbr;
- unsigned long spc;
- unsigned long sr;
- unsigned long sp;
-
- /* structure for keeping register addresses */
- struct sh_sleep_regs addr;
-
- /* structure for saving/restoring register state */
- struct sh_sleep_regs data;
-};
-
-/* a bitmap of supported sleep modes (SUSP_SH..) */
-extern unsigned long sh_mobile_sleep_supported;
-
-#endif
-
-/* flags passed to assembly suspend code */
-#define SUSP_SH_SLEEP (1 << 0) /* Regular sleep mode */
-#define SUSP_SH_STANDBY (1 << 1) /* SH-Mobile Software standby mode */
-#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */
-#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
-#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
-#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */
-#define SUSP_SH_REGS (1 << 6) /* Save/restore registers */
-
-#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h
deleted file mode 100644
index bd139bcdeec142..00000000000000
--- a/arch/sh/include/asm/switch_to.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <asm/switch_to_32.h>
diff --git a/arch/sh/include/asm/switch_to_32.h b/arch/sh/include/asm/switch_to_32.h
deleted file mode 100644
index 9c93fb91adb4aa..00000000000000
--- a/arch/sh/include/asm/switch_to_32.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SWITCH_TO_32_H
-#define __ASM_SH_SWITCH_TO_32_H
-
-#ifdef CONFIG_SH_DSP
-
-#define is_dsp_enabled(tsk) \
- (!!(tsk->thread.dsp_status.status & SR_DSP))
-
-#define __restore_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status; \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "movs.l @r2+, a0\n\t" \
- "movs.l @r2+, a1\n\t" \
- "movs.l @r2+, a0g\n\t" \
- "movs.l @r2+, a1g\n\t" \
- "movs.l @r2+, m0\n\t" \
- "movs.l @r2+, m1\n\t" \
- "movs.l @r2+, x0\n\t" \
- "movs.l @r2+, x1\n\t" \
- "movs.l @r2+, y0\n\t" \
- "movs.l @r2+, y1\n\t" \
- "lds.l @r2+, dsr\n\t" \
- "ldc.l @r2+, rs\n\t" \
- "ldc.l @r2+, re\n\t" \
- "ldc.l @r2+, mod\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#define __save_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status + 14; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l mod, @-r2\n\t" \
- "stc.l re, @-r2\n\t" \
- "stc.l rs, @-r2\n\t" \
- "sts.l dsr, @-r2\n\t" \
- "movs.l y1, @-r2\n\t" \
- "movs.l y0, @-r2\n\t" \
- "movs.l x1, @-r2\n\t" \
- "movs.l x0, @-r2\n\t" \
- "movs.l m1, @-r2\n\t" \
- "movs.l m0, @-r2\n\t" \
- "movs.l a1g, @-r2\n\t" \
- "movs.l a0g, @-r2\n\t" \
- "movs.l a1, @-r2\n\t" \
- "movs.l a0, @-r2\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#else
-
-#define is_dsp_enabled(tsk) (0)
-#define __save_dsp(tsk) do { } while (0)
-#define __restore_dsp(tsk) do { } while (0)
-#endif
-
-struct task_struct *__switch_to(struct task_struct *prev,
- struct task_struct *next);
-
-/*
- * switch_to() should switch tasks to task nr n, first
- */
-#define switch_to(prev, next, last) \
-do { \
- register u32 *__ts1 __asm__ ("r1"); \
- register u32 *__ts2 __asm__ ("r2"); \
- register u32 *__ts4 __asm__ ("r4"); \
- register u32 *__ts5 __asm__ ("r5"); \
- register u32 *__ts6 __asm__ ("r6"); \
- register u32 __ts7 __asm__ ("r7"); \
- struct task_struct *__last; \
- \
- if (is_dsp_enabled(prev)) \
- __save_dsp(prev); \
- if (is_dsp_enabled(next)) \
- __restore_dsp(next); \
- \
- __ts1 = (u32 *)&prev->thread.sp; \
- __ts2 = (u32 *)&prev->thread.pc; \
- __ts4 = (u32 *)prev; \
- __ts5 = (u32 *)next; \
- __ts6 = (u32 *)&next->thread.sp; \
- __ts7 = next->thread.pc; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l gbr, @-r15\n\t" \
- "sts.l pr, @-r15\n\t" \
- "mov.l r8, @-r15\n\t" \
- "mov.l r9, @-r15\n\t" \
- "mov.l r10, @-r15\n\t" \
- "mov.l r11, @-r15\n\t" \
- "mov.l r12, @-r15\n\t" \
- "mov.l r13, @-r15\n\t" \
- "mov.l r14, @-r15\n\t" \
- "mov.l r15, @r1\t! save SP\n\t" \
- "mov.l @r6, r15\t! change to new stack\n\t" \
- "mova 1f, %0\n\t" \
- "mov.l %0, @r2\t! save PC\n\t" \
- "mov.l 2f, %0\n\t" \
- "jmp @%0\t! call __switch_to\n\t" \
- " lds r7, pr\t! with return to new PC\n\t" \
- ".balign 4\n" \
- "2:\n\t" \
- ".long __switch_to\n" \
- "1:\n\t" \
- "mov.l @r15+, r14\n\t" \
- "mov.l @r15+, r13\n\t" \
- "mov.l @r15+, r12\n\t" \
- "mov.l @r15+, r11\n\t" \
- "mov.l @r15+, r10\n\t" \
- "mov.l @r15+, r9\n\t" \
- "mov.l @r15+, r8\n\t" \
- "lds.l @r15+, pr\n\t" \
- "ldc.l @r15+, gbr\n\t" \
- : "=z" (__last) \
- : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
- "r" (__ts5), "r" (__ts6), "r" (__ts7) \
- : "r3", "t"); \
- \
- last = __last; \
-} while (0)
-
-#endif /* __ASM_SH_SWITCH_TO_32_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
deleted file mode 100644
index 570699eb0e58ae..00000000000000
--- a/arch/sh/include/asm/syscall.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_H
-#define __ASM_SH_SYSCALL_H
-
-extern const unsigned long sys_call_table[];
-
-#include <asm/syscall_32.h>
-
-#endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
deleted file mode 100644
index d87738eebe30cb..00000000000000
--- a/arch/sh/include/asm/syscall_32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_32_H
-#define __ASM_SH_SYSCALL_32_H
-
-#include <uapi/linux/audit.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <asm/ptrace.h>
-
-/* The system call number is given by the user in R3 */
-static inline long syscall_get_nr(struct task_struct *task,
- struct pt_regs *regs)
-{
- return (regs->tra >= 0) ? regs->regs[3] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
- struct pt_regs *regs)
-{
- /*
- * XXX: This needs some thought. On SH we don't
- * save away the original r0 value anywhere.
- */
-}
-
-static inline long syscall_get_error(struct task_struct *task,
- struct pt_regs *regs)
-{
- return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
- struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
- struct pt_regs *regs,
- int error, long val)
-{
- regs->regs[0] = (long) error ?: val;
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *args)
-{
-
- /* Argument pattern is: R4, R5, R6, R7, R0, R1 */
- args[5] = regs->regs[1];
- args[4] = regs->regs[0];
- args[3] = regs->regs[7];
- args[2] = regs->regs[6];
- args[1] = regs->regs[5];
- args[0] = regs->regs[4];
-}
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
- int arch = AUDIT_ARCH_SH;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- arch |= __AUDIT_ARCH_LE;
-#endif
- return arch;
-}
-#endif /* __ASM_SH_SYSCALL_32_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
deleted file mode 100644
index 387105316d2882..00000000000000
--- a/arch/sh/include/asm/syscalls.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_H
-#define __ASM_SH_SYSCALLS_H
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off);
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-#include <asm/syscalls_32.h>
-
-#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
deleted file mode 100644
index 5c555b864fe092..00000000000000
--- a/arch/sh/include/asm/syscalls_32.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_32_H
-#define __ASM_SH_SYSCALLS_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-struct pt_regs;
-
-asmlinkage int sys_sigreturn(void);
-asmlinkage int sys_rt_sigreturn(void);
-asmlinkage int sys_sh_pipe(void);
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice);
-
-/* Misc syscall related bits */
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags);
-
-#endif /* __ASM_SH_SYSCALLS_32_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
deleted file mode 100644
index 1400fbb8b423b9..00000000000000
--- a/arch/sh/include/asm/thread_info.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002 Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#include <asm/page.h>
-
-/*
- * Page fault error code bits
- */
-#define FAULT_CODE_WRITE (1 << 0) /* write access */
-#define FAULT_CODE_INITIAL (1 << 1) /* initial page write */
-#define FAULT_CODE_ITLB (1 << 2) /* ITLB miss */
-#define FAULT_CODE_PROT (1 << 3) /* protection fault */
-#define FAULT_CODE_USER (1 << 4) /* user-mode access */
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- unsigned long flags; /* low level flags */
- __u32 status; /* thread synchronous flags */
- __u32 cpu;
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- unsigned long previous_sp; /* sp of previous stack in case
- of nested IRQ stacks */
- __u8 supervisor_stack[];
-};
-
-#endif
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SHIFT 12
-#else
-#define THREAD_SHIFT 13
-#endif
-
-#define THREAD_SIZE (1 << THREAD_SHIFT)
-#define STACK_WARN (THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .flags = 0, \
- .status = 0, \
- .cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
-}
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-#if defined(CONFIG_CPU_HAS_SR_RB)
- __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti));
-#else
- unsigned long __dummy;
-
- __asm__ __volatile__ (
- "mov r15, %0\n\t"
- "and %1, %0\n\t"
- : "=&r" (ti), "=r" (__dummy)
- : "1" (~(THREAD_SIZE - 1))
- : "memory");
-#endif
-
- return ti;
-}
-
-#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
-
-extern void arch_task_cache_init(void);
-extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
-extern void arch_release_task_struct(struct task_struct *tsk);
-extern void init_thread_xstate(void);
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Thread information flags
- *
- * - Limited to 24 bits, upper byte used for fault code encoding.
- *
- * - _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or
- * we blow the tst immediate size constraints and need to fix up
- * arch/sh/kernel/entry-common.S.
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_NOTIFY_SIGNAL 3 /* signal notifications exist */
-#define TIF_SINGLESTEP 4 /* singlestepping active */
-#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
-#define TIF_SECCOMP 6 /* secure computing */
-#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */
-#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-
-/* work to do in syscall trace */
-#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
- _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
- _TIF_SYSCALL_TRACEPOINT)
-
-/* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
- _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
- _TIF_SYSCALL_TRACEPOINT | _TIF_NOTIFY_SIGNAL)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
- _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0002 /* FPU used by this task this quantum */
-
-#ifndef __ASSEMBLY__
-
-#define TI_FLAG_FAULT_CODE_SHIFT 24
-
-/*
- * Additional thread flag encoding
- */
-static inline void set_thread_fault_code(unsigned int val)
-{
- struct thread_info *ti = current_thread_info();
- ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
- | (val << TI_FLAG_FAULT_CODE_SHIFT);
-}
-
-static inline unsigned int get_thread_fault_code(void)
-{
- struct thread_info *ti = current_thread_info();
- return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
-}
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
deleted file mode 100644
index f53f95bf42887f..00000000000000
--- a/arch/sh/include/asm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/include/asm-sh/timex.h
- *
- * sh architecture timex specifications
- */
-#ifndef __ASM_SH_TIMEX_H
-#define __ASM_SH_TIMEX_H
-
-/*
- * Only parts using the legacy CPG code for their clock framework
- * implementation need to define their own Pclk value. If provided, this
- * can be used for accurately setting CLOCK_TICK_RATE, otherwise we
- * simply fall back on the i8253 PIT value.
- */
-#ifdef CONFIG_SH_PCLK_FREQ
-#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
-#else
-#define CLOCK_TICK_RATE 1193180
-#endif
-
-#include <asm-generic/timex.h>
-
-#endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
deleted file mode 100644
index aeb8915e925496..00000000000000
--- a/arch/sh/include/asm/tlb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLB_H
-#define __ASM_SH_TLB_H
-
-#ifndef __ASSEMBLY__
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#ifdef CONFIG_MMU
-#include <linux/swap.h>
-
-#if defined(CONFIG_CPU_SH4)
-extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
-extern void tlb_unwire_entry(void);
-#else
-static inline void tlb_wire_entry(struct vm_area_struct *vma ,
- unsigned long addr, pte_t pte)
-{
- BUG();
-}
-
-static inline void tlb_unwire_entry(void)
-{
- BUG();
-}
-#endif /* CONFIG_CPU_SH4 */
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_H */
diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h
deleted file mode 100644
index 8f180cd3bcd638..00000000000000
--- a/arch/sh/include/asm/tlbflush.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLBFLUSH_H
-#define __ASM_SH_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- * - flush_tlb_all() flushes all processes TLBs
- * - flush_tlb_mm(mm) flushes the specified mm context TLB's
- * - flush_tlb_page(vma, vmaddr) flushes one page
- * - flush_tlb_range(vma, start, end) flushes a range of pages
- * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-extern void local_flush_tlb_all(void);
-extern void local_flush_tlb_mm(struct mm_struct *mm);
-extern void local_flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_page(struct vm_area_struct *vma,
- unsigned long page);
-extern void local_flush_tlb_kernel_range(unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
-
-extern void __flush_tlb_global(void);
-
-#ifdef CONFIG_SMP
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-extern void flush_tlb_one(unsigned long asid, unsigned long page);
-
-#else
-
-#define flush_tlb_all() local_flush_tlb_all()
-#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
-#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page)
-
-#define flush_tlb_range(vma, start, end) \
- local_flush_tlb_range(vma, start, end)
-
-#define flush_tlb_kernel_range(start, end) \
- local_flush_tlb_kernel_range(start, end)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
deleted file mode 100644
index 1db470e024565b..00000000000000
--- a/arch/sh/include/asm/topology.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_TOPOLOGY_H
-#define _ASM_SH_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#define cpu_to_node(cpu) ((void)(cpu),0)
-
-#define cpumask_of_node(node) ((void)node, cpu_online_mask)
-
-#define pcibus_to_node(bus) ((void)(bus), -1)
-#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
- cpu_all_mask : \
- cpumask_of_node(pcibus_to_node(bus)))
-
-#endif
-
-#define mc_capable() (1)
-
-const struct cpumask *cpu_coregroup_mask(int cpu);
-
-extern cpumask_t cpu_core_map[NR_CPUS];
-
-#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h
deleted file mode 100644
index ba831bc7e08f5d..00000000000000
--- a/arch/sh/include/asm/traps.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_H
-#define __ASM_SH_TRAPS_H
-
-#include <linux/compiler.h>
-
-# include <asm/traps_32.h>
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(breakpoint);
-BUILD_TRAP_HANDLER(singlestep);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-BUILD_TRAP_HANDLER(nmi);
-
-#endif /* __ASM_SH_TRAPS_H */
diff --git a/arch/sh/include/asm/traps_32.h b/arch/sh/include/asm/traps_32.h
deleted file mode 100644
index 8c5bbb7b6053cf..00000000000000
--- a/arch/sh/include/asm/traps_32.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_32_H
-#define __ASM_SH_TRAPS_32_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-
-#ifdef CONFIG_CPU_HAS_SR_RB
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- \
- __asm__ __volatile__ ( \
- "stc r2_bank, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#else
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- __asm__ __volatile__ ( \
- "mov r4, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#endif
-
-static inline void trigger_address_error(void)
-{
- __asm__ __volatile__ (
- "ldc %0, sr\n\t"
- "mov.l @%1, %0"
- :
- : "r" (0x10000000), "r" (0x80000001)
- );
-}
-
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address);
-asmlinkage void do_divide_error(unsigned long r4);
-asmlinkage void do_reserved_inst(void);
-asmlinkage void do_illegal_slot_inst(void);
-asmlinkage void do_exception_error(void);
-
-#define BUILD_TRAP_HANDLER(name) \
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \
- unsigned long r6, unsigned long r7, \
- struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL \
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \
- unsigned int vec = regs->tra; \
- (void)vec;
-
-#endif /* __ASM_SH_TRAPS_32_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
deleted file mode 100644
index 68eb24ad201383..00000000000000
--- a/arch/sh/include/asm/types.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TYPES_H
-#define __ASM_SH_TYPES_H
-
-#include <uapi/asm/types.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifndef __ASSEMBLY__
-
-typedef u16 insn_size_t;
-typedef u32 reg_size_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
deleted file mode 100644
index a79609eb14be43..00000000000000
--- a/arch/sh/include/asm/uaccess.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#include <asm/extable.h>
-#include <asm-generic/access_ok.h>
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err = -EFAULT; \
- unsigned long __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- if (likely(access_ok(__gu_addr, (size)))) \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- __chk_user_ptr(ptr); \
- __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
- __pu_err; \
-})
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- if (likely(access_ok(__pu_addr, size))) \
- __put_user_size(__pu_val, __pu_addr, (size), \
- __pu_err); \
- __pu_err; \
-})
-
-# include <asm/uaccess_32.h>
-
-extern long strncpy_from_user(char *dest, const char __user *src, long count);
-
-extern __must_check long strnlen_user(const char __user *str, long n);
-
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-static __always_inline unsigned long
-raw_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-raw_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return __copy_user((__force void *)to, from, n);
-}
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure. Usually it's 0.)
- */
-__kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) \
-({ \
- void __user * __cl_addr = (addr); \
- unsigned long __cl_size = (n); \
- \
- if (__cl_size && access_ok(__cl_addr, __cl_size)) \
- __cl_size = __clear_user(__cl_addr, __cl_size); \
- \
- __cl_size; \
-})
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
- return set_exception_table_vec(evt >> 5, handler);
-}
-
-struct mem_access {
- unsigned long (*from)(void *dst, const void __user *src, unsigned long cnt);
- unsigned long (*to)(void __user *dst, const void *src, unsigned long cnt);
-};
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int, unsigned long address);
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
deleted file mode 100644
index 5d7ddc092afd77..00000000000000
--- a/arch/sh/include/asm/uaccess_32.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __get_user_u64(x, ptr, retval); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov." insn " %2, %1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0, %1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %1, %0\n\t" \
- : "=&r" (x) \
- : "m" (__m(addr)) \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-extern void __get_user_unknown(void);
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%R1\n\t" \
- "mov.l %T2,%S1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%R1\n\t" \
- "mov #0,%S1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%S1\n\t" \
- "mov.l %T2,%R1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%S1\n\t" \
- "mov #0,%R1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#endif
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __put_user_u64(x, ptr, retval); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "1:\n\t" \
- "mov." insn " %1, %2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \
- "0" (err) \
- : "memory" \
- ); \
-} while (0)
-#else
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %0, %1\n\t" \
- : /* no outputs */ \
- : "r" (x), "m" (__m(addr)) \
- : "memory" \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %R1,%2\n\t" \
- "mov.l %S1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %S1,%2\n\t" \
- "mov.l %R1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
deleted file mode 100644
index e7f68ec61014c3..00000000000000
--- a/arch/sh/include/asm/uncached.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UNCACHED_H
-#define __ASM_SH_UNCACHED_H
-
-#include <linux/bug.h>
-
-#ifdef CONFIG_UNCACHED_MAPPING
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-extern unsigned long uncached_start, uncached_end;
-
-extern int virt_addr_uncached(unsigned long kaddr);
-extern void uncached_init(void);
-extern void uncached_resize(unsigned long size);
-
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached() \
-do { \
- unsigned long __dummy; \
- \
- __asm__ __volatile__( \
- "mova 1f, %0\n\t" \
- "add %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1:" \
- : "=&z" (__dummy) \
- : "r" (cached_to_uncached)); \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached() \
-do { \
- unsigned long __dummy; \
- ctrl_barrier(); \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
-} while (0)
-#else
-#define virt_addr_uncached(kaddr) (0)
-#define uncached_init() do { } while (0)
-#define uncached_resize(size) BUG()
-#define jump_to_uncached() do { } while (0)
-#define back_to_cached() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
deleted file mode 100644
index d6e1262501368a..00000000000000
--- a/arch/sh/include/asm/unistd.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd_32.h>
-
-#define NR_syscalls __NR_syscalls
-
-# define __ARCH_WANT_NEW_STAT
-# define __ARCH_WANT_OLD_READDIR
-# define __ARCH_WANT_OLD_STAT
-# define __ARCH_WANT_STAT64
-# define __ARCH_WANT_SYS_ALARM
-# define __ARCH_WANT_SYS_GETHOSTNAME
-# define __ARCH_WANT_SYS_IPC
-# define __ARCH_WANT_SYS_PAUSE
-# define __ARCH_WANT_SYS_SIGNAL
-# define __ARCH_WANT_SYS_TIME32
-# define __ARCH_WANT_SYS_UTIME32
-# define __ARCH_WANT_SYS_WAITPID
-# define __ARCH_WANT_SYS_SOCKETCALL
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLD_UNAME
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_SYS_FORK
-# define __ARCH_WANT_SYS_VFORK
-# define __ARCH_WANT_SYS_CLONE
-
-#include <uapi/asm/unistd.h>
diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
deleted file mode 100644
index ce82c96c789904..00000000000000
--- a/arch/sh/include/asm/unwinder.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_UNWINDER_H
-#define _LINUX_UNWINDER_H
-
-#include <asm/stacktrace.h>
-
-struct unwinder {
- const char *name;
- struct list_head list;
- int rating;
- void (*dump)(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *, void *);
-};
-
-extern int unwinder_init(void);
-extern int unwinder_register(struct unwinder *);
-
-extern void unwind_stack(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-/*
- * Used by fault handling code to signal to the unwinder code that it
- * should switch to a different unwinder.
- */
-extern int unwinder_faulted;
-
-#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
deleted file mode 100644
index 12ea0f3f441991..00000000000000
--- a/arch/sh/include/asm/user.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_USER_H
-#define __ASM_SH_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd). The file contents are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-
-struct user_fpu_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-};
-
-struct user {
- struct pt_regs regs; /* entire machine state */
- struct user_fpu_struct fpu; /* Math Co-processor registers */
- int u_fpvalid; /* True if math co-processor being used */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#endif /* __ASM_SH_USER_H */
diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h
deleted file mode 100644
index 5b2057c39170ed..00000000000000
--- a/arch/sh/include/asm/vermagic.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef _ASM_VERMAGIC_H
-#define _ASM_VERMAGIC_H
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2LE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3LE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4LE "
-# else
-# error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2BE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3BE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4BE "
-# else
-# error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
-#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h
deleted file mode 100644
index 089fbdc6c0b1d0..00000000000000
--- a/arch/sh/include/asm/vga.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VGA_H
-#define __ASM_SH_VGA_H
-
-/* Stupid drivers. */
-
-#endif /* __ASM_SH_VGA_H */
diff --git a/arch/sh/include/asm/vmalloc.h b/arch/sh/include/asm/vmalloc.h
deleted file mode 100644
index 716b7747264658..00000000000000
--- a/arch/sh/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_SH_VMALLOC_H
-#define _ASM_SH_VMALLOC_H
-
-#endif /* _ASM_SH_VMALLOC_H */
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
deleted file mode 100644
index 8d96c4f9b35b88..00000000000000
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VMLINUX_LDS_H
-#define __ASM_SH_VMLINUX_LDS_H
-
-#include <asm-generic/vmlinux.lds.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-#define DWARF_EH_FRAME \
- .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { \
- __start_eh_frame = .; \
- *(.eh_frame) \
- __stop_eh_frame = .; \
- }
-#else
-#define DWARF_EH_FRAME
-#endif
-
-#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
deleted file mode 100644
index b9ca4c99f046a6..00000000000000
--- a/arch/sh/include/asm/watchdog.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Valentin Sitdikov
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#define WTCNT_HIGH 0x5a
-#define WTCSR_HIGH 0xa5
-
-#define WTCSR_CKS2 0x04
-#define WTCSR_CKS1 0x02
-#define WTCSR_CKS0 0x01
-
-#include <cpu/watchdog.h>
-
-/*
- * See cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-# define WTCNT_R WTCNT
-#endif
-
-#ifndef WTCSR_R
-# define WTCSR_R WTCSR
-#endif
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio Overflow Period
- * --------------------------------------------
- * 1/32 (initial value) 41 usecs
- * 1/64 82 usecs
- * 1/128 164 usecs
- * 1/256 328 usecs
- * 1/512 656 usecs
- * 1/1024 1.31 msecs
- * 1/2048 2.62 msecs
- * 1/4096 5.25 msecs
- */
-#define WTCSR_CKS_32 0x00
-#define WTCSR_CKS_64 0x01
-#define WTCSR_CKS_128 0x02
-#define WTCSR_CKS_256 0x03
-#define WTCSR_CKS_512 0x04
-#define WTCSR_CKS_1024 0x05
-#define WTCSR_CKS_2048 0x06
-#define WTCSR_CKS_4096 0x07
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u32 sh_wdt_read_cnt(void)
-{
- return __raw_readl(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u32 val)
-{
- __raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
-}
-
-/**
- * sh_wdt_write_bst - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_bst(__u32 val)
-{
- __raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
-}
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u32 sh_wdt_read_csr(void)
-{
- return __raw_readl(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u32 val)
-{
- __raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
-}
-#else
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
- return __raw_readb(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
- __raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
- return __raw_readb(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
- __raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
deleted file mode 100644
index 4aa398455b94ab..00000000000000
--- a/arch/sh/include/asm/word-at-a-time.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_WORD_AT_A_TIME_H
-#define __ASM_SH_WORD_AT_A_TIME_H
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-# include <asm-generic/word-at-a-time.h>
-#else
-/*
- * Little-endian version cribbed from x86.
- */
-struct word_at_a_time {
- const unsigned long one_bits, high_bits;
-};
-
-#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
-
-/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
-static inline long count_masked_bytes(long mask)
-{
- /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
- long a = (0x0ff0001+mask) >> 23;
- /* Fix the 1 for 00 case */
- return a & mask;
-}
-
-/* Return nonzero if it has a zero */
-static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
-{
- unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
- *bits = mask;
- return mask;
-}
-
-static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
-{
- return bits;
-}
-
-static inline unsigned long create_zero_mask(unsigned long bits)
-{
- bits = (bits - 1) & ~bits;
- return bits >> 7;
-}
-
-/* The mask we created is directly usable as a bytemask */
-#define zero_bytemask(mask) (mask)
-
-static inline unsigned long find_zero(unsigned long mask)
-{
- return count_masked_bytes(mask);
-}
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
deleted file mode 100644
index d8bf5d7d2fdf0a..00000000000000
--- a/arch/sh/include/cpu-common/cpu/addrspace.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Definitions for the address spaces of the SH-2 CPUs.
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_ADDRSPACE_H
-#define __ASM_CPU_SH2_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
deleted file mode 100644
index cef3a30dbf97c8..00000000000000
--- a/arch/sh/include/cpu-common/cpu/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/mmu_context.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
-#define __ASM_CPU_SH2_MMU_CONTEXT_H
-
-/* No MMU */
-
-#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-common/cpu/pfc.h b/arch/sh/include/cpu-common/cpu/pfc.h
deleted file mode 100644
index 879d2c9da537fa..00000000000000
--- a/arch/sh/include/cpu-common/cpu/pfc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#ifndef __ARCH_SH_CPU_PFC_H__
-#define __ARCH_SH_CPU_PFC_H__
-
-#include <linux/types.h>
-
-struct resource;
-
-int sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources);
-
-#endif /* __ARCH_SH_CPU_PFC_H__ */
diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
deleted file mode 100644
index 5fe726acd9f8f5..00000000000000
--- a/arch/sh/include/cpu-common/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2_RTC_H
-#define __ASM_SH_CPU_SH2_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES 0UL
-
-#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
deleted file mode 100644
index e005dd176ff211..00000000000000
--- a/arch/sh/include/cpu-common/cpu/sigcontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
-#define __ASM_CPU_SH2_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
deleted file mode 100644
index af51438755e003..00000000000000
--- a/arch/sh/include/cpu-common/cpu/timer.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_TIMER_H
-#define __ASM_CPU_SH2_TIMER_H
-
-/* Nothing needed yet */
-
-#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
deleted file mode 100644
index 070aa9f50d3f09..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/cache.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_CACHE_H
-#define __ASM_CPU_SH2_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define SH_CCR 0xffffffec
-
-#define CCR_CACHE_CE 0x01 /* Cache enable */
-#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */
- /* 0x00000000-0x7fffffff: Write-through */
- /* 0x80000000-0x9fffffff: Write-back */
- /* 0xc0000000-0xdfffffff: Write-through */
-#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */
- /* 0x00000000-0x7fffffff: Write-back */
- /* 0x80000000-0x9fffffff: Write-through */
- /* 0xc0000000-0xdfffffff: Write-back */
-#define CCR_CACHE_CF 0x08 /* Cache invalidate */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_DATA_ARRAY 0xf1000000
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif
-
-#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
deleted file mode 100644
index fb2e5d2831bc76..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/freq.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2_FREQ_H
-#define __ASM_CPU_SH2_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define FREQCR 0xf815ff80
-#endif
-
-#endif /* __ASM_CPU_SH2_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
deleted file mode 100644
index 141fe296d75168..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/watchdog.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_WATCHDOG_H
-#define __ASM_CPU_SH2_WATCHDOG_H
-
-/*
- * More SH-2 brilliance .. its not good enough that we can't read
- * and write the same sizes to WTCNT, now we have to read and write
- * with different sizes at different addresses for WTCNT _and_ RSTCSR.
- *
- * At least on the bright side no one has managed to screw over WTCSR
- * in this fashion .. yet.
- */
-/* Register definitions */
-#define WTCNT 0xfffffe80
-#define WTCSR 0xfffffe80
-#define RSTCSR 0xfffffe82
-
-#define WTCNT_R (WTCNT + 1)
-#define RSTCSR_R (RSTCSR + 1)
-
-/* Bit definitions */
-#define WTCSR_IOVF 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_TME 0x20
-#define WTCSR_RSTS 0x00
-
-#define RSTCSR_RSTS 0x20
-
-/**
- * sh_wdt_read_rstcsr - Read from Reset Control/Status Register
- *
- * Reads back the RSTCSR value.
- */
-static inline __u8 sh_wdt_read_rstcsr(void)
-{
- /*
- * Same read/write brain-damage as for WTCNT here..
- */
- return __raw_readb(RSTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Reset Control/Status Register
- *
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_rstcsr(__u8 val)
-{
- /*
- * Note: Due to the brain-damaged nature of this register,
- * we can't presently touch the WOVF bit, since the upper byte
- * has to be swapped for this. So just leave it alone..
- */
- __raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
-}
-
-#endif /* __ASM_CPU_SH2_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
deleted file mode 100644
index 3afa46c09fb531..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/addrspace.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x00000000
-#define P2SEG 0x20000000
-#define P3SEG 0x40000000
-#define P4SEG 0x60000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
deleted file mode 100644
index 06efb233eb35f4..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/cache.h
- *
- * Copyright (C) 2004 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2A_CACHE_H
-#define __ASM_CPU_SH2A_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xfffc1000 /* CCR1 */
-#define SH_CCR2 0xfffc1004
-
-/*
- * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
- * listed here are reserved.
- */
-#define CCR_CACHE_CB 0x0000 /* Hack */
-#define CCR_CACHE_OCE 0x0001
-#define CCR_CACHE_WT 0x0002
-#define CCR_CACHE_OCI 0x0008 /* OCF */
-#define CCR_CACHE_ICE 0x0100
-#define CCR_CACHE_ICI 0x0800 /* ICF */
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf0800000
-
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI)
-#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI
-#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
deleted file mode 100644
index fb0813f47043ea..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/freq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2A_FREQ_H
-#define __ASM_CPU_SH2A_FREQ_H
-
-#define FREQCR 0xfffe0010
-
-#endif /* __ASM_CPU_SH2A_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
deleted file mode 100644
index 6b6c7ee752debf..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_RTC_H
-#define __ASM_SH_CPU_SH2A_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7203.h b/arch/sh/include/cpu-sh2a/cpu/sh7203.h
deleted file mode 100644
index f250adfa46c626..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7203.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7203_H__
-#define __ASM_SH7203_H__
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC14, GPIO_PC13, GPIO_PC12,
- GPIO_PC11, GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE15, GPIO_PE14, GPIO_PE13, GPIO_PE12,
- GPIO_PE11, GPIO_PE10, GPIO_PE9, GPIO_PE8,
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF30, GPIO_PF29, GPIO_PF28,
- GPIO_PF27, GPIO_PF26, GPIO_PF25, GPIO_PF24,
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PB, GPIO_FN_PINT6_PB, GPIO_FN_PINT5_PB, GPIO_FN_PINT4_PB,
- GPIO_FN_PINT3_PB, GPIO_FN_PINT2_PB, GPIO_FN_PINT1_PB, GPIO_FN_PINT0_PB,
- GPIO_FN_PINT7_PD, GPIO_FN_PINT6_PD, GPIO_FN_PINT5_PD, GPIO_FN_PINT4_PD,
- GPIO_FN_PINT3_PD, GPIO_FN_PINT2_PD, GPIO_FN_PINT1_PD, GPIO_FN_PINT0_PD,
- GPIO_FN_IRQ7_PB, GPIO_FN_IRQ6_PB, GPIO_FN_IRQ5_PB, GPIO_FN_IRQ4_PB,
- GPIO_FN_IRQ3_PB, GPIO_FN_IRQ2_PB, GPIO_FN_IRQ1_PB, GPIO_FN_IRQ0_PB,
- GPIO_FN_IRQ7_PD, GPIO_FN_IRQ6_PD, GPIO_FN_IRQ5_PD, GPIO_FN_IRQ4_PD,
- GPIO_FN_IRQ3_PD, GPIO_FN_IRQ2_PD, GPIO_FN_IRQ1_PD, GPIO_FN_IRQ0_PD,
- GPIO_FN_IRQ7_PE, GPIO_FN_IRQ6_PE, GPIO_FN_IRQ5_PE, GPIO_FN_IRQ4_PE,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- GPIO_FN_WDTOVF, GPIO_FN_IRQOUT, GPIO_FN_REFOUT, GPIO_FN_IRQOUT_REFOUT,
- GPIO_FN_UBCTRG,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* IIC3 */
- GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1,
- GPIO_FN_SDA0, GPIO_FN_SCL0,
-
- /* DMAC */
- GPIO_FN_TEND0_PD, GPIO_FN_TEND0_PE, GPIO_FN_DACK0_PD,
- GPIO_FN_DACK0_PE, GPIO_FN_DREQ0_PD, GPIO_FN_DREQ0_PE,
- GPIO_FN_TEND1_PD, GPIO_FN_TEND1_PE, GPIO_FN_DACK1_PD,
- GPIO_FN_DACK1_PE, GPIO_FN_DREQ1_PD, GPIO_FN_DREQ1_PE,
- GPIO_FN_DACK2, GPIO_FN_DREQ2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3,
-
- /* ADC */
- GPIO_FN_ADTRG_PD, GPIO_FN_ADTRG_PE,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_CS4, GPIO_FN_MRES, GPIO_FN_BS,
- GPIO_FN_IOIS16, GPIO_FN_CS1, GPIO_FN_CS6_CE1B,
- GPIO_FN_CE2B, GPIO_FN_CS5_CE1A, GPIO_FN_CE2A,
- GPIO_FN_FRAME, GPIO_FN_WAIT, GPIO_FN_RDWR,
- GPIO_FN_CKE, GPIO_FN_CASU, GPIO_FN_BREQ, GPIO_FN_RASU,
- GPIO_FN_BACK, GPIO_FN_CASL, GPIO_FN_RASL,
- GPIO_FN_WE3_DQMUU_AH_ICIO_WR, GPIO_FN_WE2_DQMUL_ICIORD,
- GPIO_FN_WE1_DQMLU_WE, GPIO_FN_WE0_DQMLL,
- GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_A1, GPIO_FN_A0, GPIO_FN_CS7,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD_PD, GPIO_FN_TCLKC_PD, GPIO_FN_TCLKB_PD, GPIO_FN_TCLKA_PD,
- GPIO_FN_TCLKD_PF, GPIO_FN_TCLKC_PF, GPIO_FN_TCLKB_PF, GPIO_FN_TCLKA_PF,
-
- /* SSU */
- GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
- GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
- GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
- GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
-
- /* SCIF */
- GPIO_FN_TXD0, GPIO_FN_RXD0, GPIO_FN_SCK0,
- GPIO_FN_TXD1, GPIO_FN_RXD1, GPIO_FN_SCK1,
- GPIO_FN_TXD2, GPIO_FN_RXD2, GPIO_FN_SCK2,
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3, GPIO_FN_SCK3,
-
- /* SSI */
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_SSIDATA3, GPIO_FN_SSIWS3, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA2, GPIO_FN_SSIWS2, GPIO_FN_SSISCK2,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIWS1, GPIO_FN_SSISCK1,
- GPIO_FN_SSIDATA0, GPIO_FN_SSIWS0, GPIO_FN_SSISCK0,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_FRB,
- GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0,
- GPIO_FN_FSC, GPIO_FN_FOE, GPIO_FN_FCDE, GPIO_FN_FWE,
-
- /* LCDC */
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_M_DISP, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_DON,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
-};
-
-#endif /* __ASM_SH7203_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/arch/sh/include/cpu-sh2a/cpu/sh7264.h
deleted file mode 100644
index 8a1338aaf10a5c..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7264.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7264_H__
-#define __ASM_SH7264_H__
-
-enum {
- /* Port A */
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* Port K */
- GPIO_PK11, GPIO_PK10, GPIO_PK9, GPIO_PK8,
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG,
-
- GPIO_FN_IRQ7_PC, GPIO_FN_IRQ6_PC, GPIO_FN_IRQ5_PC, GPIO_FN_IRQ4_PC,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
-
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS6CE1B, GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_ICIOWRAH, GPIO_FN_ICIORD,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_SCK1, GPIO_FN_SCK2, GPIO_FN_SCK3,
- GPIO_FN_RXD0, GPIO_FN_RXD1, GPIO_FN_RXD2, GPIO_FN_RXD3,
- GPIO_FN_TXD0, GPIO_FN_TXD1, GPIO_FN_TXD2, GPIO_FN_TXD3,
- GPIO_FN_RXD4, GPIO_FN_RXD5, GPIO_FN_RXD6, GPIO_FN_RXD7,
- GPIO_FN_TXD4, GPIO_FN_TXD5, GPIO_FN_TXD6, GPIO_FN_TXD7,
- GPIO_FN_RTS1, GPIO_FN_RTS3, GPIO_FN_CTS1, GPIO_FN_CTS3,
-
- /* RSPI */
- GPIO_FN_RSPCK0, GPIO_FN_MOSI0,
- GPIO_FN_MISO0_PF12, GPIO_FN_MISO1,
- GPIO_FN_SSL00,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1_PG19, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC3 */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6, GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2, GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7264_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
deleted file mode 100644
index fece521c74b30d..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7269_H__
-#define __ASM_SH7269_H__
-
-enum {
- /* Port A */
- GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG27, GPIO_PG26, GPIO_PG25, GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ31, GPIO_PJ30, GPIO_PJ29, GPIO_PJ28,
- GPIO_PJ27, GPIO_PJ26, GPIO_PJ25, GPIO_PJ24,
- GPIO_PJ23, GPIO_PJ22, GPIO_PJ21, GPIO_PJ20,
- GPIO_PJ19, GPIO_PJ18, GPIO_PJ17, GPIO_PJ16,
- GPIO_PJ15, GPIO_PJ14, GPIO_PJ13, GPIO_PJ12,
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* INTC: IRQ and PINT */
- GPIO_FN_IRQ7_PG, GPIO_FN_IRQ6_PG, GPIO_FN_IRQ5_PG, GPIO_FN_IRQ4_PG,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PG, GPIO_FN_IRQ0_PG,
- GPIO_FN_IRQ7_PF, GPIO_FN_IRQ6_PF, GPIO_FN_IRQ5_PF, GPIO_FN_IRQ4_PF,
- GPIO_FN_IRQ3_PJ, GPIO_FN_IRQ2_PJ, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ1_PC, GPIO_FN_IRQ0_PC,
-
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG, GPIO_FN_PINT0_PG,
- GPIO_FN_PINT7_PH, GPIO_FN_PINT6_PH, GPIO_FN_PINT5_PH, GPIO_FN_PINT4_PH,
- GPIO_FN_PINT3_PH, GPIO_FN_PINT2_PH, GPIO_FN_PINT1_PH, GPIO_FN_PINT0_PH,
- GPIO_FN_PINT7_PJ, GPIO_FN_PINT6_PJ, GPIO_FN_PINT5_PJ, GPIO_FN_PINT4_PJ,
- GPIO_FN_PINT3_PJ, GPIO_FN_PINT2_PJ, GPIO_FN_PINT1_PJ, GPIO_FN_PINT0_PJ,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX2, GPIO_FN_CRX2,
- GPIO_FN_CTX1, GPIO_FN_CRX1,
- GPIO_FN_CTX0, GPIO_FN_CRX0,
- GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
- GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
- GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
- GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_WE3ICIOWRAHDQMUU, GPIO_FN_WE2ICIORDDQMUL,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
- GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
- GPIO_FN_SCK2, GPIO_FN_RXD2, GPIO_FN_TXD2,
- GPIO_FN_SCK3, GPIO_FN_RXD3, GPIO_FN_TXD3,
- GPIO_FN_SCK4, GPIO_FN_RXD4, GPIO_FN_TXD4,
- GPIO_FN_SCK5, GPIO_FN_RXD5, GPIO_FN_TXD5, GPIO_FN_RTS5, GPIO_FN_CTS5,
- GPIO_FN_SCK6, GPIO_FN_RXD6, GPIO_FN_TXD6,
- GPIO_FN_SCK7, GPIO_FN_RXD7, GPIO_FN_TXD7, GPIO_FN_RTS7, GPIO_FN_CTS7,
-
- /* RSPI */
- GPIO_FN_MISO0_PJ19, GPIO_FN_MISO0_PB20,
- GPIO_FN_MOSI0_PJ18, GPIO_FN_MOSI0_PB19,
- GPIO_FN_SSL00_PJ17, GPIO_FN_SSL00_PB18,
- GPIO_FN_RSPCK0_PJ16, GPIO_FN_RSPCK0_PB17,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_AUDIO_XOUT,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA23, GPIO_FN_DV_DATA22,
- GPIO_FN_DV_DATA21, GPIO_FN_DV_DATA20,
- GPIO_FN_DV_DATA19, GPIO_FN_DV_DATA18,
- GPIO_FN_DV_DATA17, GPIO_FN_DV_DATA16,
- GPIO_FN_DV_DATA15, GPIO_FN_DV_DATA14,
- GPIO_FN_DV_DATA13, GPIO_FN_DV_DATA12,
- GPIO_FN_DV_DATA11, GPIO_FN_DV_DATA10,
- GPIO_FN_DV_DATA9, GPIO_FN_DV_DATA8,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6,
- GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2,
- GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22,
- GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20,
- GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18,
- GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16,
- GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14,
- GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12,
- GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10,
- GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8,
- GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6,
- GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4,
- GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2,
- GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0,
- GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22,
- GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20,
- GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18,
- GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16,
- GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14,
- GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12,
- GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10,
- GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8,
- GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6,
- GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4,
- GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2,
- GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7269_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
deleted file mode 100644
index 8f932b733c6748..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/watchdog.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <cpu-sh2/cpu/watchdog.h>
diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
deleted file mode 100644
index 2ee206c9bf1aa8..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/adc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_ADC_H
-#define __ASM_CPU_SH3_ADC_H
-
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-
-#define ADDRAH 0xa4000080
-#define ADDRAL 0xa4000082
-#define ADDRBH 0xa4000084
-#define ADDRBL 0xa4000086
-#define ADDRCH 0xa4000088
-#define ADDRCL 0xa400008a
-#define ADDRDH 0xa400008c
-#define ADDRDL 0xa400008e
-#define ADCSR 0xa4000090
-
-#define ADCSR_ADF 0x80
-#define ADCSR_ADIE 0x40
-#define ADCSR_ADST 0x20
-#define ADCSR_MULTI 0x10
-#define ADCSR_CKS 0x08
-#define ADCSR_CH_MASK 0x07
-
-#define ADCR 0xa4000092
-
-#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
deleted file mode 100644
index f571248269430c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_CACHE_H
-#define __ASM_CPU_SH3_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xffffffec /* Address of Cache Control Register */
-
-#define CCR_CACHE_CE 0x01 /* Cache Enable */
-#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */
-#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */
-#define CCR_CACHE_CF 0x08 /* Cache Flush */
-#define CCR_CACHE_ORA 0x20 /* RAM mode */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3_REG 0xa40000b4
-#define CCR_CACHE_16KB 0x00010000
-#define CCR_CACHE_32KB 0x00020000
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
deleted file mode 100644
index fd02331608a8d6..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dac.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DAC_H
-#define __ASM_CPU_SH3_DAC_H
-
-/*
- * Copyright (C) 2003 Andriy Skulysh
- */
-
-
-#define DADR0 0xa40000a0
-#define DADR1 0xa40000a2
-#define DACR 0xa40000a4
-#define DACR_DAOE1 0x80
-#define DACR_DAOE0 0x40
-#define DACR_DAE 0x20
-
-
-static __inline__ void sh_dac_enable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v |= DACR_DAOE1;
- else v |= DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_disable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v &= ~DACR_DAOE1;
- else v &= ~DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_output(u8 value, int channel)
-{
- if(channel) __raw_writeb(value,DADR1);
- else __raw_writeb(value,DADR0);
-}
-
-#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma-register.h b/arch/sh/include/cpu-sh3/cpu/dma-register.h
deleted file mode 100644
index c0f921fb4edcd1..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma-register.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH3 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-#define CHCR_TS_LOW_MASK 0x18
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-#define DMAOR_INIT DMAOR_DME
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- */
-enum {
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_128BIT,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_128BIT] = 4, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 3) << CHCR_TS_LOW_SHIFT)
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
deleted file mode 100644
index cd139681af4b6f..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DMA_H
-#define __ASM_CPU_SH3_DMA_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-#define SH_DMAC_BASE0 0xa4010020
-#else /* SH7705/06/07/09 */
-#define SH_DMAC_BASE0 0xa4000020
-#endif
-
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-
-#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
deleted file mode 100644
index 7290f02b717330..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/freq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_FREQ_H
-#define __ASM_CPU_SH3_FREQ_H
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7712
-#define FRQCR 0xA415FF80
-#else
-#define FRQCR 0xffffff80
-#endif
-
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 4
-
-#define FRQCR_CKOEN 0x0100
-#define FRQCR_PLLEN 0x0080
-#define FRQCR_PSTBY 0x0040
-
-#endif /* __ASM_CPU_SH3_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
deleted file mode 100644
index aeb0588ace980c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/gpio.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/gpio.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Addresses for the Pin Function Controller
- */
-#ifndef _CPU_SH3_GPIO_H
-#define _CPU_SH3_GPIO_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-
-/* Control registers */
-#define PORT_PACR 0xA4050100UL
-#define PORT_PBCR 0xA4050102UL
-#define PORT_PCCR 0xA4050104UL
-#define PORT_PDCR 0xA4050106UL
-#define PORT_PECR 0xA4050108UL
-#define PORT_PFCR 0xA405010AUL
-#define PORT_PGCR 0xA405010CUL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PPCR 0xA4050118UL
-#define PORT_PRCR 0xA405011AUL
-#define PORT_PSCR 0xA405011CUL
-#define PORT_PTCR 0xA405011EUL
-#define PORT_PUCR 0xA4050120UL
-#define PORT_PVCR 0xA4050122UL
-
-/* Data registers */
-#define PORT_PADR 0xA4050140UL
-/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
-#define PORT_PBDR 0xA4050142UL
-#define PORT_PCDR 0xA4050144UL
-#define PORT_PDDR 0xA4050146UL
-#define PORT_PEDR 0xA4050148UL
-#define PORT_PFDR 0xA405014AUL
-#define PORT_PGDR 0xA405014CUL
-#define PORT_PHDR 0xA405014EUL
-#define PORT_PJDR 0xA4050150UL
-#define PORT_PKDR 0xA4050152UL
-#define PORT_PLDR 0xA4050154UL
-#define PORT_PMDR 0xA4050156UL
-#define PORT_PPDR 0xA4050158UL
-#define PORT_PRDR 0xA405015AUL
-#define PORT_PSDR 0xA405015CUL
-#define PORT_PTDR 0xA405015EUL
-#define PORT_PUDR 0xA4050160UL
-#define PORT_PVDR 0xA4050162UL
-
-/* Pin Select Registers */
-#define PORT_PSELA 0xA4050124UL
-#define PORT_PSELB 0xA4050126UL
-#define PORT_PSELC 0xA4050128UL
-#define PORT_PSELD 0xA405012AUL
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-
-/* Control registers */
-#define PORT_PACR 0xa4000100UL
-#define PORT_PBCR 0xa4000102UL
-#define PORT_PCCR 0xa4000104UL
-#define PORT_PFCR 0xa400010aUL
-
-/* Data registers */
-#define PORT_PADR 0xa4000120UL
-#define PORT_PBDR 0xa4000122UL
-#define PORT_PCDR 0xa4000124UL
-#define PORT_PFDR 0xa400012aUL
-
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
deleted file mode 100644
index ead9a6f721135d..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/mmu_context.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
-#define __ASM_CPU_SH3_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */
-#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */
-#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */
-
-#define MMUCR 0xFFFFFFE0 /* MMU Control Register */
-#define MMUCR_TI (1 << 2) /* TLB flush bit */
-
-#define MMU_TLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#define MMU_NTLB_ENTRIES 128 /* for 7708 */
-#define MMU_NTLB_WAYS 4
-#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */
-
-#define TRA 0xffffffd0
-#define EXPEVT 0xffffffd4
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
-#else
-#define INTEVT 0xffffffd8
-#endif
-
-#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/serial.h b/arch/sh/include/cpu-sh3/cpu/serial.h
deleted file mode 100644
index 7b2ce6e3003e1e..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/serial.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH3_SERIAL_H
-#define __CPU_SH3_SERIAL_H
-
-#include <linux/serial_sci.h>
-
-extern struct plat_sci_port_ops sh770x_sci_port_ops;
-extern struct plat_sci_port_ops sh7710_sci_port_ops;
-extern struct plat_sci_port_ops sh7720_sci_port_ops;
-
-#endif /* __CPU_SH3_SERIAL_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/sh7720.h b/arch/sh/include/cpu-sh3/cpu/sh7720.h
deleted file mode 100644
index 449790c9eb77cd..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/sh7720.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7720_H__
-#define __ASM_SH7720_H__
-
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, GPIO_PTE3,
- GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, GPIO_PTG6,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, GPIO_PTH3,
- GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4, GPIO_PTJ3,
- GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, GPIO_PTL3,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTP */
- GPIO_PTP4, GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS6B_CE1B,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_A20, GPIO_FN_A19, GPIO_FN_A0,
- GPIO_FN_REFOUT, GPIO_FN_IRQOUT,
-
- /* LCDC */
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_DON, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
-
- /* AFEIF */
- GPIO_FN_AFE_RXIN, GPIO_FN_AFE_RDET,
- GPIO_FN_AFE_FS, GPIO_FN_AFE_TXOUT,
- GPIO_FN_AFE_SCLK, GPIO_FN_AFE_RLYCNT,
- GPIO_FN_AFE_HC1,
-
- /* IIC */
- GPIO_FN_IIC_SCL, GPIO_FN_IIC_SDA,
-
- /* DAC */
- GPIO_FN_DA1, GPIO_FN_DA0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* USB */
- GPIO_FN_USB1D_RCV, GPIO_FN_USB1D_TXSE0,
- GPIO_FN_USB1D_TXDPLS, GPIO_FN_USB1D_DMNS,
- GPIO_FN_USB1D_DPLS, GPIO_FN_USB1D_SPEED,
- GPIO_FN_USB1D_TXENL, GPIO_FN_USB2_PWR_EN,
- GPIO_FN_USB1_PWR_EN_USBF_UPLUP, GPIO_FN_USB1D_SUSPEND,
-
- /* INTC */
- GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3_IRL3, GPIO_FN_IRQ2_IRL2,
- GPIO_FN_IRQ1_IRL1, GPIO_FN_IRQ0_IRL0,
-
- /* PCC */
- GPIO_FN_PCC_REG, GPIO_FN_PCC_DRV,
- GPIO_FN_PCC_BVD2, GPIO_FN_PCC_BVD1,
- GPIO_FN_PCC_CD2, GPIO_FN_PCC_CD1,
- GPIO_FN_PCC_RESET, GPIO_FN_PCC_RDY,
- GPIO_FN_PCC_VS2, GPIO_FN_PCC_VS1,
-
- /* HUDI */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_ASEBRKAK, GPIO_FN_TRST,
- GPIO_FN_TMS, GPIO_FN_TDO, GPIO_FN_TDI, GPIO_FN_TCK,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_TEND0,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_MCLK,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
- GPIO_FN_SIOF0_SCK,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_MCLK,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
- GPIO_FN_SIOF1_SCK,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* TPU */
- GPIO_FN_TPU_TO1, GPIO_FN_TPU_TO0,
- GPIO_FN_TPU_TI3B, GPIO_FN_TPU_TI3A,
- GPIO_FN_TPU_TI2B, GPIO_FN_TPU_TI2A,
- GPIO_FN_TPU_TO3, GPIO_FN_TPU_TO2,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* MMC */
- GPIO_FN_MMC_DAT, GPIO_FN_MMC_CMD,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_VDDON,
- GPIO_FN_MMC_ODMOD,
-
- /* SYSC */
- GPIO_FN_STATUS0, GPIO_FN_STATUS1,
-};
-
-#endif /* __ASM_SH7720_H__ */
diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
deleted file mode 100644
index 9d7e9d98680947..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/watchdog.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_WATCHDOG_H
-#define __ASM_CPU_SH3_WATCHDOG_H
-
-/* Register definitions */
-#define WTCNT 0xffffff84
-#define WTCSR 0xffffff86
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH3_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
deleted file mode 100644
index f006c9489f5adb..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-4 CPUs.
- */
-#ifndef __ASM_CPU_SH4_ADDRSPACE_H
-#define __ASM_CPU_SH4_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-/* Detailed P4SEG */
-#define P4SEG_STORE_QUE (P4SEG)
-#define P4SEG_IC_ADDR 0xf0000000
-#define P4SEG_IC_DATA 0xf1000000
-#define P4SEG_ITLB_ADDR 0xf2000000
-#define P4SEG_ITLB_DATA 0xf3000000
-#define P4SEG_OC_ADDR 0xf4000000
-#define P4SEG_OC_DATA 0xf5000000
-#define P4SEG_TLB_ADDR 0xf6000000
-#define P4SEG_TLB_DATA 0xf7000000
-#define P4SEG_REG_BASE 0xff000000
-
-#define PA_AREA0 0x00000000
-#define PA_AREA1 0x04000000
-#define PA_AREA2 0x08000000
-#define PA_AREA3 0x0c000000
-#define PA_AREA4 0x10000000
-#define PA_AREA5 0x14000000
-#define PA_AREA6 0x18000000
-#define PA_AREA7 0x1c000000
-
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
-
-#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
deleted file mode 100644
index 72b4d13da127cd..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/cache.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_CACHE_H
-#define __ASM_CPU_SH4_CACHE_H
-
-#define L1_CACHE_SHIFT 5
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xff00001c /* Address of Cache Control Register */
-#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */
-#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/
-#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */
-#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */
-#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */
-#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */
-#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
-#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
-#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
-#ifndef CONFIG_CPU_SH4A
-#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
-#endif
-
-/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI)
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf4000000
-
-#define RAMCR 0xFF000074
-
-#endif /* __ASM_CPU_SH4_CACHE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
deleted file mode 100644
index 53f7ab990d8874..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH4 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-/* SH7751/7760/7780 DMA IRQ sources */
-
-#ifdef CONFIG_CPU_SH4A
-
-#define DMAOR_INIT DMAOR_DME
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00300000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00100000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#endif
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_128BIT_BLK = 0xb,
- XMIT_SZ_256BIT_BLK = 0xc,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_128BIT] = 4, \
- [XMIT_SZ_256BIT] = 5, \
- [XMIT_SZ_128BIT_BLK] = 4, \
- [XMIT_SZ_256BIT_BLK] = 5, \
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
- (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
-
-#else /* CONFIG_CPU_SH4A */
-
-#define DMAOR_INIT (0x8000 | DMAOR_DME)
-
-#define CHCR_TS_LOW_MASK 0x70
-#define CHCR_TS_LOW_SHIFT 4
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 1,
- XMIT_SZ_16BIT = 2,
- XMIT_SZ_32BIT = 3,
- XMIT_SZ_64BIT = 0,
- XMIT_SZ_256BIT = 4,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_256BIT] = 5, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 7) << CHCR_TS_LOW_SHIFT)
-
-#endif /* CONFIG_CPU_SH4A */
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
deleted file mode 100644
index 38187d06b23433..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#include <linux/sh_intc.h>
-
-/*
- * SH7750/SH7751/SH7760
- */
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMAE0_IRQ evt2irq(0x6c0)
-
-#define SH_DMAC_BASE0 0xffa00000
-#define SH_DMAC_BASE1 0xffa00070
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
deleted file mode 100644
index 29f451bfef19b4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/fpu.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
- *
- * Copyright (C) 2006 STMicroelectronics Limited
- * Author: Carl Shaw <carl.shaw@st.com>
- *
- * Definitions for SH4 FPU operations
- */
-
-#ifndef __CPU_SH4_FPU_H
-#define __CPU_SH4_FPU_H
-
-#define FPSCR_ENABLE_MASK 0x00000f80UL
-
-#define FPSCR_FMOV_DOUBLE (1<<1)
-
-#define FPSCR_CAUSE_INEXACT (1<<12)
-#define FPSCR_CAUSE_UNDERFLOW (1<<13)
-#define FPSCR_CAUSE_OVERFLOW (1<<14)
-#define FPSCR_CAUSE_DIVZERO (1<<15)
-#define FPSCR_CAUSE_INVALID (1<<16)
-#define FPSCR_CAUSE_ERROR (1<<17)
-
-#define FPSCR_DBL_PRECISION (1<<19)
-#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3)
-#define FPSCR_RM_NEAREST (0)
-#define FPSCR_RM_ZERO (1)
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
deleted file mode 100644
index 662f0f30e106e8..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150010
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-#define FRQCR 0xffc80000
-#define OSCCR 0xffc80018
-#define PLLCR 0xffc80024
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define FRQCR 0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define FRQCR FRQCRA
-#define SCLKACR FCLKACR
-#define SCLKBCR FCLKBCR
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150018
-
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7734)
-#define FRQCR0 0xffc80000
-#define FRQCR2 0xffc80008
-#define FRQMR1 0xffc80014
-#define FRQMR2 0xffc80018
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0 0xffc80000
-#define FRQCR1 0xffc80004
-#define FRQMR1 0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define FRQCR0 0xffc40000
-#define FRQCR1 0xffc40004
-#define FRQMR1 0xffc40014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR0 0xffc00000
-#define FRQCR1 0xffc00004
-#define FRQMR1 0xffc00014
-#else
-#define FRQCR 0xffc00000
-#define FRQCR_PSTBY 0x0200
-#define FRQCR_PLLEN 0x0400
-#define FRQCR_CKOEN 0x0800
-#endif
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
deleted file mode 100644
index 421b56d5c59562..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
-#define __ASM_CPU_SH4_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */
-#define MMU_TTB 0xFF000008 /* Translation table base register */
-#define MMU_TEA 0xFF00000C /* TLB Exception Address */
-#define MMU_PTEA 0xFF000034 /* PTE assistance register */
-#define MMU_PTEAEX 0xFF00007C /* PTE ASID extension register */
-
-#define MMUCR 0xFF000010 /* MMU Control Register */
-
-#define MMU_TLB_ENTRY_SHIFT 8
-
-#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000
-#define MMU_ITLB_DATA_ARRAY 0xF3000000
-#define MMU_ITLB_DATA_ARRAY2 0xF3800000
-
-#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
-#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000
-#define MMU_UTLB_DATA_ARRAY 0xF7000000
-#define MMU_UTLB_DATA_ARRAY2 0xF7800000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#ifdef CONFIG_MMU
-#define MMUCR_AT (1 << 0)
-#else
-#define MMUCR_AT (0)
-#endif
-
-#define MMUCR_TI (1 << 2)
-
-#define MMUCR_URB 0x00FC0000
-#define MMUCR_URB_SHIFT 18
-#define MMUCR_URB_NENTRIES 64
-#define MMUCR_URC 0x0000FC00
-#define MMUCR_URC_SHIFT 10
-
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
-#define MMUCR_SE (1 << 4)
-#else
-#define MMUCR_SE (0)
-#endif
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMUCR_AEX (1 << 6)
-#else
-#define MMUCR_AEX (0)
-#endif
-
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME (1 << 7)
-#else
-#define MMUCR_ME (0)
-#endif
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define MMUCR_SQMD (1 << 9)
-#else
-#define MMUCR_SQMD (0)
-#endif
-
-#define MMU_NTLB_ENTRIES 64
-#define MMU_CONTROL_INIT (MMUCR_AT | MMUCR_TI | MMUCR_SQMD | \
- MMUCR_ME | MMUCR_SE | MMUCR_AEX)
-
-#define TRA 0xff000020
-#define EXPEVT 0xff000024
-#define INTEVT 0xff000028
-
-#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
deleted file mode 100644
index 45647566940f30..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/rtc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_RTC_H
-#define __ASM_SH_CPU_SH4_RTC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define rtc_reg_size sizeof(u16)
-#else
-#define rtc_reg_size sizeof(u32)
-#endif
-
-#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
deleted file mode 100644
index 2306c79f4b5e26..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7722_H__
-#define __ASM_SH7722_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC5, GPIO_PTC4, GPIO_PTC3,
- GPIO_PTC2, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG4, GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, GPIO_PTK3,
- GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR4, GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, GPIO_PTW3,
- GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, GPIO_PTX3,
- GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY5, GPIO_PTY4, GPIO_PTY3, GPIO_PTY2,
- GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ5, GPIO_PTZ4, GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* SCIF2 */
- GPIO_FN_SCIF2_TXD, GPIO_FN_SCIF2_RXD,
- GPIO_FN_SCIF2_RTS, GPIO_FN_SCIF2_CTS, GPIO_FN_SCIF2_SCK,
-
- /* SIO */
- GPIO_FN_SIOTXD, GPIO_FN_SIORXD,
- GPIO_FN_SIOD, GPIO_FN_SIOSTRB0, GPIO_FN_SIOSTRB1,
- GPIO_FN_SIOSCK, GPIO_FN_SIOMCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO, GPIO_FN_VIO_STEX, GPIO_FN_VIO_STEM,
- GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, GPIO_FN_VIO_CLK,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
- /* Sub LCD - SYS Mode */
- GPIO_FN_LCDDON2, GPIO_FN_LCDVCPWC2, GPIO_FN_LCDVEPWC2,
- GPIO_FN_LCDVSYN2, GPIO_FN_LCDCS2,
-
- /* BSC */
- GPIO_FN_IOIS16, GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_BS, GPIO_FN_CS6B_CE1B, GPIO_FN_WAIT, GPIO_FN_CS6A_CE2B,
-
- /* SBSC */
- GPIO_FN_HPD63, GPIO_FN_HPD62, GPIO_FN_HPD61, GPIO_FN_HPD60,
- GPIO_FN_HPD59, GPIO_FN_HPD58, GPIO_FN_HPD57, GPIO_FN_HPD56,
- GPIO_FN_HPD55, GPIO_FN_HPD54, GPIO_FN_HPD53, GPIO_FN_HPD52,
- GPIO_FN_HPD51, GPIO_FN_HPD50, GPIO_FN_HPD49, GPIO_FN_HPD48,
- GPIO_FN_HPDQM7, GPIO_FN_HPDQM6, GPIO_FN_HPDQM5, GPIO_FN_HPDQM4,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* SDHI */
- GPIO_FN_SDHICD, GPIO_FN_SDHIWP, GPIO_FN_SDHID3, GPIO_FN_SDHID2,
- GPIO_FN_SDHID1, GPIO_FN_SDHID0, GPIO_FN_SDHICMD, GPIO_FN_SDHICLK,
-
- /* SIU - Port A */
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAISLD, GPIO_FN_SIUAILR,
- GPIO_FN_SIUAIBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUMCKA, GPIO_FN_SIUFCKA,
-
- /* SIU - Port B */
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBISLD, GPIO_FN_SIUBILR,
- GPIO_FN_SIUBIBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUMCKB, GPIO_FN_SIUFCKB,
-
- /* AUD */
- GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0,
-
- /* DMAC */
- GPIO_FN_DACK, GPIO_FN_DREQ0,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_MCK, GPIO_FN_SIOF0_SCK,
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_SS1, GPIO_FN_SIOF0_SS2,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_MCK, GPIO_FN_SIOF1_SCK,
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_SS1, GPIO_FN_SIOF1_SS2,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* TSIF */
- GPIO_FN_TS_SDAT, GPIO_FN_TS_SCK, GPIO_FN_TS_SDEN, GPIO_FN_TS_SPSYNC,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* TPU */
- GPIO_FN_TPUTO,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-};
-
-enum {
- HWBLK_URAM, HWBLK_XYMEM,
- HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_IIC, HWBLK_RTC,
- HWBLK_SDHI, HWBLK_KEYSC,
- HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
- HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
- HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SIUA_TX,
- SHDMA_SLAVE_SIUA_RX,
- SHDMA_SLAVE_SIUB_TX,
- SHDMA_SLAVE_SIUB_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
-};
-
-#endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
deleted file mode 100644
index 41f675307503d4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7723_H__
-#define __ASM_SH7723_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE5, GPIO_PTE4, GPIO_PTE3, GPIO_PTE2,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ5, GPIO_PTJ3, GPIO_PTJ2,
- GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT5, GPIO_PTT4, GPIO_PTT3, GPIO_PTT2,
- GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU5, GPIO_PTU4, GPIO_PTU3, GPIO_PTU2,
- GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* SCIF0 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF0_PTT_TXD, GPIO_FN_SCIF0_PTT_RXD, GPIO_FN_SCIF0_PTT_SCK,
- GPIO_FN_SCIF0_PTU_TXD, GPIO_FN_SCIF0_PTU_RXD, GPIO_FN_SCIF0_PTU_SCK,
-
- /* SCIF1 (SCIF: 3 pin PTS/PTV) */
- GPIO_FN_SCIF1_PTS_TXD, GPIO_FN_SCIF1_PTS_RXD, GPIO_FN_SCIF1_PTS_SCK,
- GPIO_FN_SCIF1_PTV_TXD, GPIO_FN_SCIF1_PTV_RXD, GPIO_FN_SCIF1_PTV_SCK,
-
- /* SCIF2 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF2_PTT_TXD, GPIO_FN_SCIF2_PTT_RXD, GPIO_FN_SCIF2_PTT_SCK,
- GPIO_FN_SCIF2_PTU_TXD, GPIO_FN_SCIF2_PTU_RXD, GPIO_FN_SCIF2_PTU_SCK,
-
- /* SCIF3 (SCIFA: 5 pin PTS/PTV) */
- GPIO_FN_SCIF3_PTS_TXD, GPIO_FN_SCIF3_PTS_RXD, GPIO_FN_SCIF3_PTS_SCK,
- GPIO_FN_SCIF3_PTS_RTS, GPIO_FN_SCIF3_PTS_CTS,
- GPIO_FN_SCIF3_PTV_TXD, GPIO_FN_SCIF3_PTV_RXD, GPIO_FN_SCIF3_PTV_SCK,
- GPIO_FN_SCIF3_PTV_RTS, GPIO_FN_SCIF3_PTV_CTS,
-
- /* SCIF4 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF4_PTE_TXD, GPIO_FN_SCIF4_PTE_RXD, GPIO_FN_SCIF4_PTE_SCK,
- GPIO_FN_SCIF4_PTN_TXD, GPIO_FN_SCIF4_PTN_RXD, GPIO_FN_SCIF4_PTN_SCK,
-
- /* SCIF5 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF5_PTE_TXD, GPIO_FN_SCIF5_PTE_RXD, GPIO_FN_SCIF5_PTE_SCK,
- GPIO_FN_SCIF5_PTN_TXD, GPIO_FN_SCIF5_PTN_RXD, GPIO_FN_SCIF5_PTN_SCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO,
- GPIO_FN_VIO_VD1, GPIO_FN_VIO_HD1, GPIO_FN_VIO_CLK1,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK_PTR, GPIO_FN_LCDLCLK_PTW,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* AUD */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC,
-
- /* SDHI0 (PTD) */
- GPIO_FN_SDHI0CD_PTD, GPIO_FN_SDHI0WP_PTD,
- GPIO_FN_SDHI0D3_PTD, GPIO_FN_SDHI0D2_PTD,
- GPIO_FN_SDHI0D1_PTD, GPIO_FN_SDHI0D0_PTD,
- GPIO_FN_SDHI0CMD_PTD, GPIO_FN_SDHI0CLK_PTD,
-
- /* SDHI0 (PTS) */
- GPIO_FN_SDHI0CD_PTS, GPIO_FN_SDHI0WP_PTS,
- GPIO_FN_SDHI0D3_PTS, GPIO_FN_SDHI0D2_PTS,
- GPIO_FN_SDHI0D1_PTS, GPIO_FN_SDHI0D0_PTS,
- GPIO_FN_SDHI0CMD_PTS, GPIO_FN_SDHI0CLK_PTS,
-
- /* SDHI1 */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2,
- GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
-
- /* SIUA */
- GPIO_FN_SIUAFCK, GPIO_FN_SIUAILR, GPIO_FN_SIUAIBT, GPIO_FN_SIUAISLD,
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUAMCK,
- GPIO_FN_SIUAISPD, GPIO_FN_SIUAOSPD,
-
- /* SIUB */
- GPIO_FN_SIUBFCK, GPIO_FN_SIUBILR, GPIO_FN_SIUBIBT, GPIO_FN_SIUBISLD,
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUBMCK,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-
- /* MSIOF0 (PTF) */
- GPIO_FN_MSIOF0_PTF_TXD, GPIO_FN_MSIOF0_PTF_RXD, GPIO_FN_MSIOF0_PTF_MCK,
- GPIO_FN_MSIOF0_PTF_TSYNC, GPIO_FN_MSIOF0_PTF_TSCK,
- GPIO_FN_MSIOF0_PTF_RSYNC, GPIO_FN_MSIOF0_PTF_RSCK,
- GPIO_FN_MSIOF0_PTF_SS1, GPIO_FN_MSIOF0_PTF_SS2,
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN_MSIOF0_PTT_TXD, GPIO_FN_MSIOF0_PTT_RXD, GPIO_FN_MSIOF0_PTX_MCK,
- GPIO_FN_MSIOF0_PTT_TSYNC, GPIO_FN_MSIOF0_PTT_TSCK,
- GPIO_FN_MSIOF0_PTT_RSYNC, GPIO_FN_MSIOF0_PTT_RSCK,
- GPIO_FN_MSIOF0_PTT_SS1, GPIO_FN_MSIOF0_PTT_SS2,
-
- /* MSIOF1 */
- GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_MCK,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
-
- /* TSIF */
- GPIO_FN_TS0_SDAT, GPIO_FN_TS0_SCK, GPIO_FN_TS0_SDEN, GPIO_FN_TS0_SPSYNC,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* TPU */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_WAIT, GPIO_FN_BS,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
-
- /* ATAPI */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IODREQ, GPIO_FN_IDEIORDY, GPIO_FN_IDEINT, GPIO_FN_IDEIOWR,
- GPIO_FN_IDEIORD, GPIO_FN_IDECS1, GPIO_FN_IDECS0, GPIO_FN_IDEA2,
- GPIO_FN_IDEA1, GPIO_FN_IDEA0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
- HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
- HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
- HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
- HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
- HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
- HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-#endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
deleted file mode 100644
index b3a7caf54c9d68..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7724_H__
-#define __ASM_SH7724_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->7
- * MD1: CPG - Clock Mode 0->7
- * MD2: CPG - Clock Mode 0->7
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4,
- GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
- GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
- GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
- GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
- GPIO_FN_IOIS16, GPIO_FN_WAIT,
- GPIO_FN_BS,
-
- /* KEYSC (PTA/PTB)*/
- GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
- GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
-
- /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR,
- GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IDEINT, GPIO_FN_IDEIORDY,
-
- /* TPU (PTB/PTR/PTS) */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
- GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
-
- /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN,
- GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
- GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK,
-
- /* SCIF0 (PTF/PTM) */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 (PTL) */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
- GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
- GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
-
- /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
- GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
- GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
- GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
- GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
-
- /* SCIF4 (PTE) */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 (PTS) */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* FSI (PTE/PTU/PTV) */
- GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD,
- GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK,
- GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
- GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK,
- GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO,
- GPIO_FN_FSIIASD,
-
- /* AUD (PTG) */
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
- GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
-
- /* VIO (PTS) (common?) */
- GPIO_FN_VIO_CKO,
-
- /* VIO0 (PTH/PTK) */
- GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
- GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8,
- GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4,
- GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0,
- GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK,
- GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
-
- /* VIO1 (PTK/PTS) */
- GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
- GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
- GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
-
- /* Eth (PTL/PTN/PTX) */
- GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1,
- GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1,
- GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
- GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV,
- GPIO_FN_LNKSTA, GPIO_FN_MDIO,
- GPIO_FN_MDC,
-
- /* System (PTJ) */
- GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
-
- /* VOU (PTL/PTM/PTN*/
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
-
- /* MSIOF0 (PTL/PTM) */
- GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
- GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK,
- GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
- GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
- GPIO_FN_MSIOF0_RSYNC,
-
- /* MSIOF1 (PTV) */
- GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD,
- GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_RSYNC,
-
- /* DMAC (PTU/PTX) */
- GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
- GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
-
- /* SDHI0 (PTY) */
- GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
- GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0,
-
- /* SDHI1 (PTW) */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
- GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0,
-
- /* MMC (PTW/PTX)*/
- GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
- GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
-
- /* IrDA (PTX) */
- GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
-
- /* TSIF (PTX) */
- GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
- GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
-
- /* IRQ (PTZ) */
- GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
- GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
- GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
- HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
- HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
- HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
- HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
- HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
- HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
- HWBLK_BEU0, HWBLK_CEU0, HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_SCIF5_TX,
- SHDMA_SLAVE_SCIF5_RX,
- SHDMA_SLAVE_USB0D0_TX,
- SHDMA_SLAVE_USB0D0_RX,
- SHDMA_SLAVE_USB0D1_TX,
- SHDMA_SLAVE_USB0D1_RX,
- SHDMA_SLAVE_USB1D0_TX,
- SHDMA_SLAVE_USB1D0_RX,
- SHDMA_SLAVE_USB1D1_TX,
- SHDMA_SLAVE_USB1D1_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
- SHDMA_SLAVE_SDHI1_TX,
- SHDMA_SLAVE_SDHI1_RX,
-};
-
-extern struct clk sh7724_fsimcka_clk;
-extern struct clk sh7724_fsimckb_clk;
-extern struct clk sh7724_dv_clki;
-
-#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7734.h b/arch/sh/include/cpu-sh4/cpu/sh7734.h
deleted file mode 100644
index 82b63208135aec..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7734.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7734_H__
-#define __ASM_SH7734_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
- */
-enum {
- GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
- GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
- GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
- GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
- GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
- GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
- GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
- GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
-
- GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
- GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
- GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
- GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
- GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
- GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
- GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
- GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31,
-
- GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
- GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
- GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
- GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
- GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
- GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
- GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
- GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
-
- GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
- GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
- GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
- GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
- GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
- GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
- GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
- GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
-
- GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
- GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
- GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
- GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
- GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
- GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
- GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
- GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
-
- GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
- GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
- GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
-
- GPIO_FN_CLKOUT, GPIO_FN_BS, GPIO_FN_CS0, GPIO_FN_EX_CS0, GPIO_FN_RD,
- GPIO_FN_WE0, GPIO_FN_WE1,
-
- GPIO_FN_SCL0, GPIO_FN_PENC0, GPIO_FN_USB_OVC0,
-
- GPIO_FN_IRQ2_B, GPIO_FN_IRQ3_B,
-
- /* IPSR0 */
- GPIO_FN_A15, GPIO_FN_ST0_VCO_CLKIN, GPIO_FN_LCD_DATA15_A,
- GPIO_FN_TIOC3D_C,
- GPIO_FN_A14, GPIO_FN_LCD_DATA14_A, GPIO_FN_TIOC3C_C,
- GPIO_FN_A13, GPIO_FN_LCD_DATA13_A, GPIO_FN_TIOC3B_C,
- GPIO_FN_A12, GPIO_FN_LCD_DATA12_A, GPIO_FN_TIOC3A_C,
- GPIO_FN_A11, GPIO_FN_ST0_D7, GPIO_FN_LCD_DATA11_A,
- GPIO_FN_TIOC2B_C,
- GPIO_FN_A10, GPIO_FN_ST0_D6, GPIO_FN_LCD_DATA10_A,
- GPIO_FN_TIOC2A_C,
- GPIO_FN_A9, GPIO_FN_ST0_D5, GPIO_FN_LCD_DATA9_A,
- GPIO_FN_TIOC1B_C,
- GPIO_FN_A8, GPIO_FN_ST0_D4, GPIO_FN_LCD_DATA8_A,
- GPIO_FN_TIOC1A_C,
- GPIO_FN_A7, GPIO_FN_ST0_D3, GPIO_FN_LCD_DATA7_A, GPIO_FN_TIOC0D_C,
- GPIO_FN_A6, GPIO_FN_ST0_D2, GPIO_FN_LCD_DATA6_A, GPIO_FN_TIOC0C_C,
- GPIO_FN_A5, GPIO_FN_ST0_D1, GPIO_FN_LCD_DATA5_A, GPIO_FN_TIOC0B_C,
- GPIO_FN_A4, GPIO_FN_ST0_D0, GPIO_FN_LCD_DATA4_A, GPIO_FN_TIOC0A_C,
- GPIO_FN_A3, GPIO_FN_ST0_VLD, GPIO_FN_LCD_DATA3_A, GPIO_FN_TCLKD_C,
- GPIO_FN_A2, GPIO_FN_ST0_SYC, GPIO_FN_LCD_DATA2_A, GPIO_FN_TCLKC_C,
- GPIO_FN_A1, GPIO_FN_ST0_REQ, GPIO_FN_LCD_DATA1_A, GPIO_FN_TCLKB_C,
- GPIO_FN_A0, GPIO_FN_ST0_CLKIN, GPIO_FN_LCD_DATA0_A, GPIO_FN_TCLKA_C,
-
- /* IPSR1 */
- GPIO_FN_D3, GPIO_FN_SD0_DAT3_A, GPIO_FN_MMC_D3_A, GPIO_FN_ST1_D6,
- GPIO_FN_FD3_A,
- GPIO_FN_D2, GPIO_FN_SD0_DAT2_A, GPIO_FN_MMC_D2_A, GPIO_FN_ST1_D5,
- GPIO_FN_FD2_A,
- GPIO_FN_D1, GPIO_FN_SD0_DAT1_A, GPIO_FN_MMC_D1_A, GPIO_FN_ST1_D4,
- GPIO_FN_FD1_A,
- GPIO_FN_D0, GPIO_FN_SD0_DAT0_A, GPIO_FN_MMC_D0_A, GPIO_FN_ST1_D3,
- GPIO_FN_FD0_A,
- GPIO_FN_A25, GPIO_FN_TX2_D, GPIO_FN_ST1_D2,
- GPIO_FN_A24, GPIO_FN_RX2_D, GPIO_FN_ST1_D1,
- GPIO_FN_A23, GPIO_FN_ST1_D0, GPIO_FN_LCD_M_DISP_A,
- GPIO_FN_A22, GPIO_FN_ST1_VLD, GPIO_FN_LCD_VEPWC_A,
- GPIO_FN_A21, GPIO_FN_ST1_SYC, GPIO_FN_LCD_VCPWC_A,
- GPIO_FN_A20, GPIO_FN_ST1_REQ, GPIO_FN_LCD_FLM_A,
- GPIO_FN_A19, GPIO_FN_ST1_CLKIN, GPIO_FN_LCD_CLK_A, GPIO_FN_TIOC4D_C,
- GPIO_FN_A18, GPIO_FN_ST1_PWM, GPIO_FN_LCD_CL2_A, GPIO_FN_TIOC4C_C,
- GPIO_FN_A17, GPIO_FN_ST1_VCO_CLKIN, GPIO_FN_LCD_CL1_A, GPIO_FN_TIOC4B_C,
- GPIO_FN_A16, GPIO_FN_ST0_PWM, GPIO_FN_LCD_DON_A, GPIO_FN_TIOC4A_C,
-
- /* IPSR2 */
- GPIO_FN_D14, GPIO_FN_TX2_B, GPIO_FN_FSE_A, GPIO_FN_ET0_TX_CLK_B,
- GPIO_FN_D13, GPIO_FN_RX2_B, GPIO_FN_FRB_A, GPIO_FN_ET0_ETXD6_B,
- GPIO_FN_D12, GPIO_FN_FWE_A, GPIO_FN_ET0_ETXD5_B,
- GPIO_FN_D11, GPIO_FN_RSPI_MISO_A, GPIO_FN_QMI_QIO1_A,
- GPIO_FN_FRE_A, GPIO_FN_ET0_ETXD3_B,
- GPIO_FN_D10, GPIO_FN_RSPI_MOSI_A, GPIO_FN_QMO_QIO0_A,
- GPIO_FN_FALE_A, GPIO_FN_ET0_ETXD2_B,
- GPIO_FN_D9, GPIO_FN_SD0_CMD_A, GPIO_FN_MMC_CMD_A, GPIO_FN_QIO3_A,
- GPIO_FN_FCLE_A, GPIO_FN_ET0_ETXD1_B,
- GPIO_FN_D8, GPIO_FN_SD0_CLK_A, GPIO_FN_MMC_CLK_A, GPIO_FN_QIO2_A,
- GPIO_FN_FCE_A, GPIO_FN_ET0_GTX_CLK_B,
- GPIO_FN_D7, GPIO_FN_RSPI_SSL_A, GPIO_FN_MMC_D7_A, GPIO_FN_QSSL_A,
- GPIO_FN_FD7_A,
- GPIO_FN_D6, GPIO_FN_RSPI_RSPCK_A, GPIO_FN_MMC_D6_A, GPIO_FN_QSPCLK_A,
- GPIO_FN_FD6_A,
- GPIO_FN_D5, GPIO_FN_SD0_WP_A, GPIO_FN_MMC_D5_A, GPIO_FN_FD5_A,
- GPIO_FN_D4, GPIO_FN_SD0_CD_A, GPIO_FN_MMC_D4_A, GPIO_FN_ST1_D7,
- GPIO_FN_FD4_A,
-
- /* IPSR3 */
- GPIO_FN_DRACK0, GPIO_FN_SD1_DAT2_A, GPIO_FN_ATAG, GPIO_FN_TCLK1_A,
- GPIO_FN_ET0_ETXD7,
- GPIO_FN_EX_WAIT2, GPIO_FN_SD1_DAT1_A, GPIO_FN_DACK2, GPIO_FN_CAN1_RX_C,
- GPIO_FN_ET0_MAGIC_C, GPIO_FN_ET0_ETXD6_A,
- GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C,
- GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A,
- GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B,
- GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4,
- GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B,
- GPIO_FN_ET0_ETXD3_A,
- GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B,
- GPIO_FN_ET0_ETXD2_A,
- GPIO_FN_EX_CS3, GPIO_FN_SD1_CD_A, GPIO_FN_ATARD, GPIO_FN_QMO_QIO0_B,
- GPIO_FN_ET0_ETXD1_A,
- GPIO_FN_EX_CS2, GPIO_FN_TX3_B, GPIO_FN_ATACS1, GPIO_FN_QSPCLK_B,
- GPIO_FN_ET0_GTX_CLK_A,
- GPIO_FN_EX_CS1, GPIO_FN_RX3_B, GPIO_FN_ATACS0, GPIO_FN_QIO2_B,
- GPIO_FN_ET0_ETXD0,
- GPIO_FN_CS1_A26, GPIO_FN_QIO3_B,
- GPIO_FN_D15, GPIO_FN_SCK2_B,
-
- /* IPSR4 */
- GPIO_FN_SCK2_A, GPIO_FN_VI0_G3,
- GPIO_FN_RTS1_B, GPIO_FN_VI0_G2,
- GPIO_FN_CTS1_B, GPIO_FN_VI0_DATA7_VI0_G1,
- GPIO_FN_TX1_B, GPIO_FN_VI0_DATA6_VI0_G0, GPIO_FN_ET0_PHY_INT_A,
- GPIO_FN_RX1_B, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_ET0_MAGIC_A,
- GPIO_FN_SCK1_B, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ET0_LINK_A,
- GPIO_FN_RTS0_B, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ET0_MDIO_A,
- GPIO_FN_CTS0_B, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_RMII0_MDIO_A,
- GPIO_FN_ET0_MDC,
- GPIO_FN_HTX0_A, GPIO_FN_TX1_A, GPIO_FN_VI0_DATA1_VI0_B1,
- GPIO_FN_RMII0_MDC_A, GPIO_FN_ET0_COL,
- GPIO_FN_HRX0_A, GPIO_FN_RX1_A, GPIO_FN_VI0_DATA0_VI0_B0,
- GPIO_FN_RMII0_CRS_DV_A, GPIO_FN_ET0_CRS,
- GPIO_FN_HSCK0_A, GPIO_FN_SCK1_A, GPIO_FN_VI0_VSYNC,
- GPIO_FN_RMII0_RX_ER_A, GPIO_FN_ET0_RX_ER,
- GPIO_FN_HRTS0_A, GPIO_FN_RTS1_A, GPIO_FN_VI0_HSYNC,
- GPIO_FN_RMII0_TXD_EN_A, GPIO_FN_ET0_RX_DV,
- GPIO_FN_HCTS0_A, GPIO_FN_CTS1_A, GPIO_FN_VI0_FIELD,
- GPIO_FN_RMII0_RXD1_A, GPIO_FN_ET0_ERXD7,
-
- /* IPSR5 */
- GPIO_FN_SD2_CLK_A, GPIO_FN_RX2_A, GPIO_FN_VI0_G4, GPIO_FN_ET0_RX_CLK_B,
- GPIO_FN_SD2_CMD_A, GPIO_FN_TX2_A, GPIO_FN_VI0_G5, GPIO_FN_ET0_ERXD2_B,
- GPIO_FN_SD2_DAT0_A, GPIO_FN_RX3_A, GPIO_FN_VI0_R0, GPIO_FN_ET0_ERXD3_B,
- GPIO_FN_SD2_DAT1_A, GPIO_FN_TX3_A, GPIO_FN_VI0_R1, GPIO_FN_ET0_MDIO_B,
- GPIO_FN_SD2_DAT2_A, GPIO_FN_RX4_A, GPIO_FN_VI0_R2, GPIO_FN_ET0_LINK_B,
- GPIO_FN_SD2_DAT3_A, GPIO_FN_TX4_A, GPIO_FN_VI0_R3, GPIO_FN_ET0_MAGIC_B,
- GPIO_FN_SD2_CD_A, GPIO_FN_RX5_A, GPIO_FN_VI0_R4, GPIO_FN_ET0_PHY_INT_B,
- GPIO_FN_SD2_WP_A, GPIO_FN_TX5_A, GPIO_FN_VI0_R5,
- GPIO_FN_REF125CK, GPIO_FN_ADTRG, GPIO_FN_RX5_C,
- GPIO_FN_REF50CK, GPIO_FN_CTS1_E, GPIO_FN_HCTS0_D,
-
- /* IPSR6 */
- GPIO_FN_DU0_DR0, GPIO_FN_SCIF_CLK_B, GPIO_FN_HRX0_D, GPIO_FN_IETX_A,
- GPIO_FN_TCLKA_A, GPIO_FN_HIFD00,
- GPIO_FN_DU0_DR1, GPIO_FN_SCK0_B, GPIO_FN_HTX0_D, GPIO_FN_IERX_A,
- GPIO_FN_TCLKB_A, GPIO_FN_HIFD01,
- GPIO_FN_DU0_DR2, GPIO_FN_RX0_B, GPIO_FN_TCLKC_A, GPIO_FN_HIFD02,
- GPIO_FN_DU0_DR3, GPIO_FN_TX0_B, GPIO_FN_TCLKD_A, GPIO_FN_HIFD03,
- GPIO_FN_DU0_DR4, GPIO_FN_CTS0_C, GPIO_FN_TIOC0A_A, GPIO_FN_HIFD04,
- GPIO_FN_DU0_DR5, GPIO_FN_RTS0_C, GPIO_FN_TIOC0B_A, GPIO_FN_HIFD05,
- GPIO_FN_DU0_DR6, GPIO_FN_SCK1_C, GPIO_FN_TIOC0C_A, GPIO_FN_HIFD06,
- GPIO_FN_DU0_DR7, GPIO_FN_RX1_C, GPIO_FN_TIOC0D_A, GPIO_FN_HIFD07,
- GPIO_FN_DU0_DG0, GPIO_FN_TX1_C, GPIO_FN_HSCK0_D, GPIO_FN_IECLK_A,
- GPIO_FN_TIOC1A_A, GPIO_FN_HIFD08,
- GPIO_FN_DU0_DG1, GPIO_FN_CTS1_C, GPIO_FN_HRTS0_D, GPIO_FN_TIOC1B_A,
- GPIO_FN_HIFD09,
-
- /* IPSR7 */
- GPIO_FN_DU0_DG2, GPIO_FN_RTS1_C, GPIO_FN_RMII0_MDC_B, GPIO_FN_TIOC2A_A,
- GPIO_FN_HIFD10,
- GPIO_FN_DU0_DG3, GPIO_FN_SCK2_C, GPIO_FN_RMII0_MDIO_B, GPIO_FN_TIOC2B_A,
- GPIO_FN_HIFD11,
- GPIO_FN_DU0_DG4, GPIO_FN_RX2_C, GPIO_FN_RMII0_CRS_DV_B,
- GPIO_FN_TIOC3A_A, GPIO_FN_HIFD12,
- GPIO_FN_DU0_DG5, GPIO_FN_TX2_C, GPIO_FN_RMII0_RX_ER_B,
- GPIO_FN_TIOC3B_A, GPIO_FN_HIFD13,
- GPIO_FN_DU0_DG6, GPIO_FN_RX3_C, GPIO_FN_RMII0_RXD0_B,
- GPIO_FN_TIOC3C_A, GPIO_FN_HIFD14,
- GPIO_FN_DU0_DG7, GPIO_FN_TX3_C, GPIO_FN_RMII0_RXD1_B,
- GPIO_FN_TIOC3D_A, GPIO_FN_HIFD15,
- GPIO_FN_DU0_DB0, GPIO_FN_RX4_C, GPIO_FN_RMII0_TXD_EN_B,
- GPIO_FN_TIOC4A_A, GPIO_FN_HIFCS,
- GPIO_FN_DU0_DB1, GPIO_FN_TX4_C, GPIO_FN_RMII0_TXD0_B,
- GPIO_FN_TIOC4B_A, GPIO_FN_HIFRS,
- GPIO_FN_DU0_DB2, GPIO_FN_RX5_B, GPIO_FN_RMII0_TXD1_B,
- GPIO_FN_TIOC4C_A, GPIO_FN_HIFWR,
- GPIO_FN_DU0_DB3, GPIO_FN_TX5_B, GPIO_FN_TIOC4D_A, GPIO_FN_HIFRD,
- GPIO_FN_DU0_DB4, GPIO_FN_HIFINT,
-
- /* IPSR8 */
- GPIO_FN_DU0_DB5, GPIO_FN_HIFDREQ,
- GPIO_FN_DU0_DB6, GPIO_FN_HIFRDY,
- GPIO_FN_DU0_DB7, GPIO_FN_SSI_SCK0_B, GPIO_FN_HIFEBL_B,
- GPIO_FN_DU0_DOTCLKIN, GPIO_FN_HSPI_CS0_C, GPIO_FN_SSI_WS0_B,
- GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_HSPI_CLK0_C, GPIO_FN_SSI_SDATA0_B,
- GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_HSPI_TX0_C, GPIO_FN_SSI_SCK1_B,
- GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_HSPI_RX0_C, GPIO_FN_SSI_WS1_B,
- GPIO_FN_DU0_EXODDF_DU0_ODDF, GPIO_FN_CAN0_RX_B, GPIO_FN_HSCK0_B,
- GPIO_FN_SSI_SDATA1_B,
- GPIO_FN_DU0_DISP, GPIO_FN_CAN0_TX_B, GPIO_FN_HRX0_B,
- GPIO_FN_AUDIO_CLKA_B,
- GPIO_FN_DU0_CDE, GPIO_FN_HTX0_B, GPIO_FN_AUDIO_CLKB_B,
- GPIO_FN_LCD_VCPWC_B,
- GPIO_FN_IRQ0_A, GPIO_FN_HSPI_TX_B, GPIO_FN_RX3_E, GPIO_FN_ET0_ERXD0,
- GPIO_FN_IRQ1_A, GPIO_FN_HSPI_RX_B, GPIO_FN_TX3_E, GPIO_FN_ET0_ERXD1,
- GPIO_FN_IRQ2_A, GPIO_FN_CTS0_A, GPIO_FN_HCTS0_B, GPIO_FN_ET0_ERXD2_A,
- GPIO_FN_IRQ3_A, GPIO_FN_RTS0_A, GPIO_FN_HRTS0_B, GPIO_FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- GPIO_FN_VI1_CLK_A, GPIO_FN_FD0_B, GPIO_FN_LCD_DATA0_B,
- GPIO_FN_VI1_0_A, GPIO_FN_FD1_B, GPIO_FN_LCD_DATA1_B,
- GPIO_FN_VI1_1_A, GPIO_FN_FD2_B, GPIO_FN_LCD_DATA2_B,
- GPIO_FN_VI1_2_A, GPIO_FN_FD3_B, GPIO_FN_LCD_DATA3_B,
- GPIO_FN_VI1_3_A, GPIO_FN_FD4_B, GPIO_FN_LCD_DATA4_B,
- GPIO_FN_VI1_4_A, GPIO_FN_FD5_B, GPIO_FN_LCD_DATA5_B,
- GPIO_FN_VI1_5_A, GPIO_FN_FD6_B, GPIO_FN_LCD_DATA6_B,
- GPIO_FN_VI1_6_A, GPIO_FN_FD7_B, GPIO_FN_LCD_DATA7_B,
- GPIO_FN_VI1_7_A, GPIO_FN_FCE_B, GPIO_FN_LCD_DATA8_B,
- GPIO_FN_SSI_SCK0_A, GPIO_FN_TIOC1A_B, GPIO_FN_LCD_DATA9_B,
- GPIO_FN_SSI_WS0_A, GPIO_FN_TIOC1B_B, GPIO_FN_LCD_DATA10_B,
- GPIO_FN_SSI_SDATA0_A, GPIO_FN_VI1_0_B, GPIO_FN_TIOC2A_B,
- GPIO_FN_LCD_DATA11_B,
- GPIO_FN_SSI_SCK1_A, GPIO_FN_VI1_1_B, GPIO_FN_TIOC2B_B,
- GPIO_FN_LCD_DATA12_B,
- GPIO_FN_SSI_WS1_A, GPIO_FN_VI1_2_B, GPIO_FN_LCD_DATA13_B,
- GPIO_FN_SSI_SDATA1_A, GPIO_FN_VI1_3_B, GPIO_FN_LCD_DATA14_B,
-
- /* IPSR10 */
- GPIO_FN_SSI_SCK23, GPIO_FN_VI1_4_B, GPIO_FN_RX1_D, GPIO_FN_FCLE_B,
- GPIO_FN_LCD_DATA15_B,
- GPIO_FN_SSI_WS23, GPIO_FN_VI1_5_B, GPIO_FN_TX1_D, GPIO_FN_HSCK0_C,
- GPIO_FN_FALE_B, GPIO_FN_LCD_DON_B,
- GPIO_FN_SSI_SDATA2, GPIO_FN_VI1_6_B, GPIO_FN_HRX0_C, GPIO_FN_FRE_B,
- GPIO_FN_LCD_CL1_B,
- GPIO_FN_SSI_SDATA3, GPIO_FN_VI1_7_B, GPIO_FN_HTX0_C, GPIO_FN_FWE_B,
- GPIO_FN_LCD_CL2_B,
- GPIO_FN_AUDIO_CLKA_A, GPIO_FN_VI1_CLK_B, GPIO_FN_SCK1_D,
- GPIO_FN_IECLK_B, GPIO_FN_LCD_FLM_B,
- GPIO_FN_AUDIO_CLKB_A, GPIO_FN_LCD_CLK_B,
- GPIO_FN_AUDIO_CLKC, GPIO_FN_SCK1_E, GPIO_FN_HCTS0_C, GPIO_FN_FRB_B,
- GPIO_FN_LCD_VEPWC_B,
- GPIO_FN_AUDIO_CLKOUT, GPIO_FN_TX1_E, GPIO_FN_HRTS0_C, GPIO_FN_FSE_B,
- GPIO_FN_LCD_M_DISP_B,
- GPIO_FN_CAN_CLK_A, GPIO_FN_RX4_D,
- GPIO_FN_CAN0_TX_A, GPIO_FN_TX4_D, GPIO_FN_MLB_CLK,
- GPIO_FN_CAN1_RX_A, GPIO_FN_IRQ1_B,
- GPIO_FN_CAN0_RX_A, GPIO_FN_IRQ0_B, GPIO_FN_MLB_SIG,
- GPIO_FN_CAN1_TX_A, GPIO_FN_TX5_C, GPIO_FN_MLB_DAT,
-
- /* IPSR11 */
- GPIO_FN_SCL1, GPIO_FN_SCIF_CLK_C,
- GPIO_FN_SDA1, GPIO_FN_RX1_E,
- GPIO_FN_SDA0, GPIO_FN_HIFEBL_A,
- GPIO_FN_SDSELF, GPIO_FN_RTS1_E,
- GPIO_FN_SCIF_CLK_A, GPIO_FN_HSPI_CLK_A, GPIO_FN_VI0_CLK,
- GPIO_FN_RMII0_TXD0_A, GPIO_FN_ET0_ERXD4,
- GPIO_FN_SCK0_A, GPIO_FN_HSPI_CS_A, GPIO_FN_VI0_CLKENB,
- GPIO_FN_RMII0_TXD1_A, GPIO_FN_ET0_ERXD5,
- GPIO_FN_RX0_A, GPIO_FN_HSPI_RX_A, GPIO_FN_RMII0_RXD0_A,
- GPIO_FN_ET0_ERXD6,
- GPIO_FN_TX0_A, GPIO_FN_HSPI_TX_A,
- GPIO_FN_PENC1, GPIO_FN_TX3_D, GPIO_FN_CAN1_TX_B, GPIO_FN_TX5_D,
- GPIO_FN_IETX_B,
- GPIO_FN_USB_OVC1, GPIO_FN_RX3_D, GPIO_FN_CAN1_RX_B, GPIO_FN_RX5_D,
- GPIO_FN_IERX_B,
- GPIO_FN_DREQ0, GPIO_FN_SD1_CLK_A, GPIO_FN_ET0_TX_EN,
- GPIO_FN_DACK0, GPIO_FN_SD1_DAT3_A, GPIO_FN_ET0_TX_ER,
- GPIO_FN_DREQ1, GPIO_FN_HSPI_CLK_B, GPIO_FN_RX4_B, GPIO_FN_ET0_PHY_INT_C,
- GPIO_FN_ET0_TX_CLK_A,
- GPIO_FN_DACK1, GPIO_FN_HSPI_CS_B, GPIO_FN_TX4_B, GPIO_FN_ET0_RX_CLK_A,
- GPIO_FN_PRESETOUT, GPIO_FN_ST_CLKOUT,
-
-};
-
-#endif /* __ASM_SH7734_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
deleted file mode 100644
index 6781d41b7467d2..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7757.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7757_H__
-#define __ASM_SH7757_H__
-
-enum {
- /* PTA */
- GPIO_PTA0, GPIO_PTA1, GPIO_PTA2, GPIO_PTA3,
- GPIO_PTA4, GPIO_PTA5, GPIO_PTA6, GPIO_PTA7,
-
- /* PTB */
- GPIO_PTB0, GPIO_PTB1, GPIO_PTB2, GPIO_PTB3,
- GPIO_PTB4, GPIO_PTB5, GPIO_PTB6, GPIO_PTB7,
-
- /* PTC */
- GPIO_PTC0, GPIO_PTC1, GPIO_PTC2, GPIO_PTC3,
- GPIO_PTC4, GPIO_PTC5, GPIO_PTC6, GPIO_PTC7,
-
- /* PTD */
- GPIO_PTD0, GPIO_PTD1, GPIO_PTD2, GPIO_PTD3,
- GPIO_PTD4, GPIO_PTD5, GPIO_PTD6, GPIO_PTD7,
-
- /* PTE */
- GPIO_PTE0, GPIO_PTE1, GPIO_PTE2, GPIO_PTE3,
- GPIO_PTE4, GPIO_PTE5, GPIO_PTE6, GPIO_PTE7,
-
- /* PTF */
- GPIO_PTF0, GPIO_PTF1, GPIO_PTF2, GPIO_PTF3,
- GPIO_PTF4, GPIO_PTF5, GPIO_PTF6, GPIO_PTF7,
-
- /* PTG */
- GPIO_PTG0, GPIO_PTG1, GPIO_PTG2, GPIO_PTG3,
- GPIO_PTG4, GPIO_PTG5, GPIO_PTG6, GPIO_PTG7,
-
- /* PTH */
- GPIO_PTH0, GPIO_PTH1, GPIO_PTH2, GPIO_PTH3,
- GPIO_PTH4, GPIO_PTH5, GPIO_PTH6, GPIO_PTH7,
-
- /* PTI */
- GPIO_PTI0, GPIO_PTI1, GPIO_PTI2, GPIO_PTI3,
- GPIO_PTI4, GPIO_PTI5, GPIO_PTI6, GPIO_PTI7,
-
- /* PTJ */
- GPIO_PTJ0, GPIO_PTJ1, GPIO_PTJ2, GPIO_PTJ3,
- GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6,
-
- /* PTK */
- GPIO_PTK0, GPIO_PTK1, GPIO_PTK2, GPIO_PTK3,
- GPIO_PTK4, GPIO_PTK5, GPIO_PTK6, GPIO_PTK7,
-
- /* PTL */
- GPIO_PTL0, GPIO_PTL1, GPIO_PTL2, GPIO_PTL3,
- GPIO_PTL4, GPIO_PTL5, GPIO_PTL6,
-
- /* PTM */
- GPIO_PTM0, GPIO_PTM1, GPIO_PTM2, GPIO_PTM3,
- GPIO_PTM4, GPIO_PTM5, GPIO_PTM6, GPIO_PTM7,
-
- /* PTN */
- GPIO_PTN0, GPIO_PTN1, GPIO_PTN2, GPIO_PTN3,
- GPIO_PTN4, GPIO_PTN5, GPIO_PTN6,
-
- /* PTO */
- GPIO_PTO0, GPIO_PTO1, GPIO_PTO2, GPIO_PTO3,
- GPIO_PTO4, GPIO_PTO5, GPIO_PTO6, GPIO_PTO7,
-
- /* PTP */
- GPIO_PTP0, GPIO_PTP1, GPIO_PTP2, GPIO_PTP3,
- GPIO_PTP4, GPIO_PTP5, GPIO_PTP6, GPIO_PTP7,
-
- /* PTQ */
- GPIO_PTQ0, GPIO_PTQ1, GPIO_PTQ2, GPIO_PTQ3,
- GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6,
-
- /* PTR */
- GPIO_PTR0, GPIO_PTR1, GPIO_PTR2, GPIO_PTR3,
- GPIO_PTR4, GPIO_PTR5, GPIO_PTR6, GPIO_PTR7,
-
- /* PTS */
- GPIO_PTS0, GPIO_PTS1, GPIO_PTS2, GPIO_PTS3,
- GPIO_PTS4, GPIO_PTS5, GPIO_PTS6, GPIO_PTS7,
-
- /* PTT */
- GPIO_PTT0, GPIO_PTT1, GPIO_PTT2, GPIO_PTT3,
- GPIO_PTT4, GPIO_PTT5, GPIO_PTT6, GPIO_PTT7,
-
- /* PTU */
- GPIO_PTU0, GPIO_PTU1, GPIO_PTU2, GPIO_PTU3,
- GPIO_PTU4, GPIO_PTU5, GPIO_PTU6, GPIO_PTU7,
-
- /* PTV */
- GPIO_PTV0, GPIO_PTV1, GPIO_PTV2, GPIO_PTV3,
- GPIO_PTV4, GPIO_PTV5, GPIO_PTV6, GPIO_PTV7,
-
- /* PTW */
- GPIO_PTW0, GPIO_PTW1, GPIO_PTW2, GPIO_PTW3,
- GPIO_PTW4, GPIO_PTW5, GPIO_PTW6, GPIO_PTW7,
-
- /* PTX */
- GPIO_PTX0, GPIO_PTX1, GPIO_PTX2, GPIO_PTX3,
- GPIO_PTX4, GPIO_PTX5, GPIO_PTX6, GPIO_PTX7,
-
- /* PTY */
- GPIO_PTY0, GPIO_PTY1, GPIO_PTY2, GPIO_PTY3,
- GPIO_PTY4, GPIO_PTY5, GPIO_PTY6, GPIO_PTY7,
-
- /* PTZ */
- GPIO_PTZ0, GPIO_PTZ1, GPIO_PTZ2, GPIO_PTZ3,
- GPIO_PTZ4, GPIO_PTZ5, GPIO_PTZ6, GPIO_PTZ7,
-
-
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN_BS, GPIO_FN_RDWR, GPIO_FN_WE1, GPIO_FN_RDY,
- GPIO_FN_ET0_MDC, GPIO_FN_ET0_MDIO,
- GPIO_FN_ET1_MDC, GPIO_FN_ET1_MDIO,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN_IRQ15, GPIO_FN_IRQ14, GPIO_FN_IRQ13, GPIO_FN_IRQ12,
- GPIO_FN_IRQ11, GPIO_FN_IRQ10, GPIO_FN_IRQ9, GPIO_FN_IRQ8,
- GPIO_FN_ON_NRE, GPIO_FN_ON_NWE, GPIO_FN_ON_NWP, GPIO_FN_ON_NCE0,
- GPIO_FN_ON_R_B0, GPIO_FN_ON_ALE, GPIO_FN_ON_CLE,
- GPIO_FN_TCLK,
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN_IRQ7, GPIO_FN_IRQ6, GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_PWMU0, GPIO_FN_PWMU1, GPIO_FN_PWMU2, GPIO_FN_PWMU3,
- GPIO_FN_PWMU4, GPIO_FN_PWMU5,
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN_SP0_MOSI, GPIO_FN_SP0_MISO, GPIO_FN_SP0_SCK,
- GPIO_FN_SP0_SCK_FB, GPIO_FN_SP0_SS0, GPIO_FN_SP0_SS1,
- GPIO_FN_SP0_SS2, GPIO_FN_SP0_SS3, GPIO_FN_DREQ0,
- GPIO_FN_DACK0, GPIO_FN_TEND0,
-
- /* PTE (mobule: RMII) */
- GPIO_FN_RMII0_CRS_DV, GPIO_FN_RMII0_TXD1, GPIO_FN_RMII0_TXD0,
- GPIO_FN_RMII0_TXEN, GPIO_FN_RMII0_REFCLK, GPIO_FN_RMII0_RXD1,
- GPIO_FN_RMII0_RXD0, GPIO_FN_RMII0_RX_ER,
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN_RMII1_CRS_DV, GPIO_FN_RMII1_TXD1, GPIO_FN_RMII1_TXD0,
- GPIO_FN_RMII1_TXEN, GPIO_FN_RMII1_REFCLK, GPIO_FN_RMII1_RXD1,
- GPIO_FN_RMII1_RXD0, GPIO_FN_RMII1_RX_ER, GPIO_FN_RAC_RI,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN_BOOTFMS, GPIO_FN_BOOTWP,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_SERIRQ, GPIO_FN_WDTOVF,
- GPIO_FN_LPCPD, GPIO_FN_LDRQ, GPIO_FN_MMCCLK, GPIO_FN_MMCCMD,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN_SP1_MOSI, GPIO_FN_SP1_MISO,
- GPIO_FN_SP1_SCK, GPIO_FN_SP1_SCK_FB,
- GPIO_FN_SP1_SS0, GPIO_FN_SP1_SS1,
- GPIO_FN_WP, GPIO_FN_FMS0, GPIO_FN_TEND1, GPIO_FN_DREQ1,
- GPIO_FN_DACK1, GPIO_FN_ADTRG1, GPIO_FN_ADTRG0,
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_SD_WP, GPIO_FN_SD_CD, GPIO_FN_SD_CLK, GPIO_FN_SD_CMD,
- GPIO_FN_SD_D3, GPIO_FN_SD_D2, GPIO_FN_SD_D1, GPIO_FN_SD_D0,
-
- /* PTJ (mobule: SCIF234) */
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_RTS4, GPIO_FN_RXD4, GPIO_FN_TXD4,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN_COM2_TXD, GPIO_FN_COM2_RXD, GPIO_FN_COM2_RTS,
- GPIO_FN_COM2_CTS, GPIO_FN_COM2_DTR, GPIO_FN_COM2_DSR,
- GPIO_FN_COM2_DCD, GPIO_FN_CLKOUT,
- GPIO_FN_SCK2, GPIO_FN_SCK4, GPIO_FN_SCK3,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN_RAC_RXD, GPIO_FN_RAC_RTS, GPIO_FN_RAC_CTS,
- GPIO_FN_RAC_DTR, GPIO_FN_RAC_DSR, GPIO_FN_RAC_DCD,
- GPIO_FN_RAC_TXD, GPIO_FN_RXD2, GPIO_FN_CS5,
- GPIO_FN_CS6, GPIO_FN_AUDSYNC, GPIO_FN_AUDCK,
- GPIO_FN_TXD2,
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN_CS4, GPIO_FN_RD, GPIO_FN_WE0, GPIO_FN_CS0,
- GPIO_FN_SDA6, GPIO_FN_SCL6, GPIO_FN_SDA7, GPIO_FN_SCL7,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN_VBUS_EN, GPIO_FN_VBUS_OC, GPIO_FN_JMCTCK,
- GPIO_FN_JMCTMS, GPIO_FN_JMCTDO, GPIO_FN_JMCTDI,
- GPIO_FN_JMCTRST,
- GPIO_FN_SGPIO1_CLK, GPIO_FN_SGPIO1_LOAD, GPIO_FN_SGPIO1_DI,
- GPIO_FN_SGPIO1_DO, GPIO_FN_SUB_CLKIN,
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN_SGPIO0_CLK, GPIO_FN_SGPIO0_LOAD, GPIO_FN_SGPIO0_DI,
- GPIO_FN_SGPIO0_DO, GPIO_FN_SGPIO2_CLK, GPIO_FN_SGPIO2_LOAD,
- GPIO_FN_SGPIO2_DI, GPIO_FN_SGPIO2_DO, GPIO_FN_COM1_TXD,
- GPIO_FN_COM1_RXD, GPIO_FN_COM1_RTS, GPIO_FN_COM1_CTS,
-
- /* PTQ (mobule: LPC) */
- GPIO_FN_LAD3, GPIO_FN_LAD2, GPIO_FN_LAD1, GPIO_FN_LAD0,
- GPIO_FN_LFRAME, GPIO_FN_LRESET, GPIO_FN_LCLK,
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN_DDC3, GPIO_FN_DDC2, GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1, GPIO_FN_SDA0, GPIO_FN_SCL0,
- GPIO_FN_SDA8, GPIO_FN_SCL8,
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN_DDC1, GPIO_FN_DDC0, GPIO_FN_SDA5, GPIO_FN_SCL5,
- GPIO_FN_SDA4, GPIO_FN_SCL4, GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA9, GPIO_FN_SCL9,
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN_PWMX7, GPIO_FN_PWMX6, GPIO_FN_PWMX5, GPIO_FN_PWMX4,
- GPIO_FN_PWMX3, GPIO_FN_PWMX2, GPIO_FN_PWMX1, GPIO_FN_PWMX0,
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN_LGPIO7, GPIO_FN_LGPIO6, GPIO_FN_LGPIO5, GPIO_FN_LGPIO4,
- GPIO_FN_LGPIO3, GPIO_FN_LGPIO2, GPIO_FN_LGPIO1, GPIO_FN_LGPIO0,
- GPIO_FN_APMONCTL_O, GPIO_FN_APMPWBTOUT_O, GPIO_FN_APMSCI_O,
- GPIO_FN_APMVDDON, GPIO_FN_APMSLPBTN, GPIO_FN_APMPWRBTN,
- GPIO_FN_APMS5N, GPIO_FN_APMS3N,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_COM2_RI, GPIO_FN_R_SPI_MOSI, GPIO_FN_R_SPI_MISO,
- GPIO_FN_R_SPI_RSPCK, GPIO_FN_R_SPI_SSL0, GPIO_FN_R_SPI_SSL1,
- GPIO_FN_EVENT7, GPIO_FN_EVENT6, GPIO_FN_VBIOS_DI,
- GPIO_FN_VBIOS_DO, GPIO_FN_VBIOS_CLK, GPIO_FN_VBIOS_CS,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_EVENT5, GPIO_FN_EVENT4, GPIO_FN_EVENT3, GPIO_FN_EVENT2,
- GPIO_FN_EVENT1, GPIO_FN_EVENT0, GPIO_FN_CTS4, GPIO_FN_CTS2,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_RTS2, GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* PTY (mobule: LBSC) */
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN_MMCDAT7, GPIO_FN_MMCDAT6, GPIO_FN_MMCDAT5,
- GPIO_FN_MMCDAT4, GPIO_FN_MMCDAT3, GPIO_FN_MMCDAT2,
- GPIO_FN_MMCDAT1, GPIO_FN_MMCDAT0,
- GPIO_FN_ON_DQ7, GPIO_FN_ON_DQ6, GPIO_FN_ON_DQ5, GPIO_FN_ON_DQ4,
- GPIO_FN_ON_DQ3, GPIO_FN_ON_DQ2, GPIO_FN_ON_DQ1, GPIO_FN_ON_DQ0,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SDHI_TX,
- SHDMA_SLAVE_SDHI_RX,
- SHDMA_SLAVE_MMCIF_TX,
- SHDMA_SLAVE_MMCIF_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_RIIC0_TX,
- SHDMA_SLAVE_RIIC0_RX,
- SHDMA_SLAVE_RIIC1_TX,
- SHDMA_SLAVE_RIIC1_RX,
- SHDMA_SLAVE_RIIC2_TX,
- SHDMA_SLAVE_RIIC2_RX,
- SHDMA_SLAVE_RIIC3_TX,
- SHDMA_SLAVE_RIIC3_RX,
- SHDMA_SLAVE_RIIC4_TX,
- SHDMA_SLAVE_RIIC4_RX,
- SHDMA_SLAVE_RIIC5_TX,
- SHDMA_SLAVE_RIIC5_RX,
- SHDMA_SLAVE_RIIC6_TX,
- SHDMA_SLAVE_RIIC6_RX,
- SHDMA_SLAVE_RIIC7_TX,
- SHDMA_SLAVE_RIIC7_RX,
- SHDMA_SLAVE_RIIC8_TX,
- SHDMA_SLAVE_RIIC8_RX,
- SHDMA_SLAVE_RIIC9_TX,
- SHDMA_SLAVE_RIIC9_RX,
- SHDMA_SLAVE_RSPI_TX,
- SHDMA_SLAVE_RSPI_RX,
-};
-#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
deleted file mode 100644
index 37f42071e7d3b7..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7785.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7785_H__
-#define __ASM_SH7785_H__
-
-/* Boot Mode Pins:
- *
- * MODE0: CPG - Initial Pck/Bck Frequency [FRQMR1]
- * MODE1: CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1]
- * MODE2: CPG - Reserved (L: Normal operation)
- * MODE3: CPG - Reserved (L: Normal operation)
- * MODE4: CPG - Initial PLL setting (72x/36x)
- * MODE5: LBSC - Area0 Memory Type / Bus Width [CS0BCR.8]
- * MODE6: LBSC - Area0 Memory Type / Bus Width [CS0BCR.9]
- * MODE7: LBSC - Area0 Memory Type / Bus Width [CS0BCR.3]
- * MODE8: LBSC - Endian Mode (L: Big, H: Little) [BCR.31]
- * MODE9: LBSC - Master/Slave Mode (L: Slave) [BCR.30]
- * MODE10: CPG - Clock Input (L: Ext Clk, H: Crystal)
- * MODE11: PCI - Pin Mode (LL: PCI host, LH: PCI slave)
- * MODE12: PCI - Pin Mode (HL: Local bus, HH: DU)
- * MODE13: Boot Address Mode (L: 29-bit, H: 32-bit)
- * MODE14: Reserved (H: Normal operation)
- *
- * More information in sh7785 manual Rev.1.00, page 1628.
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
- GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* PK */
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* PL */
- GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
- GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
-
- /* PM */
- GPIO_PM1, GPIO_PM0,
-
- /* PN */
- GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
- GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
-
- /* PP */
- GPIO_PP5, GPIO_PP4,
- GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
-
- /* PQ */
- GPIO_PQ4,
- GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
-
- /* PR */
- GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
-
- GPIO_FN_D63_AD31,
- GPIO_FN_D62_AD30,
- GPIO_FN_D61_AD29,
- GPIO_FN_D60_AD28,
- GPIO_FN_D59_AD27,
- GPIO_FN_D58_AD26,
- GPIO_FN_D57_AD25,
- GPIO_FN_D56_AD24,
- GPIO_FN_D55_AD23,
- GPIO_FN_D54_AD22,
- GPIO_FN_D53_AD21,
- GPIO_FN_D52_AD20,
- GPIO_FN_D51_AD19,
- GPIO_FN_D50_AD18,
- GPIO_FN_D49_AD17_DB5,
- GPIO_FN_D48_AD16_DB4,
- GPIO_FN_D47_AD15_DB3,
- GPIO_FN_D46_AD14_DB2,
- GPIO_FN_D45_AD13_DB1,
- GPIO_FN_D44_AD12_DB0,
- GPIO_FN_D43_AD11_DG5,
- GPIO_FN_D42_AD10_DG4,
- GPIO_FN_D41_AD9_DG3,
- GPIO_FN_D40_AD8_DG2,
- GPIO_FN_D39_AD7_DG1,
- GPIO_FN_D38_AD6_DG0,
- GPIO_FN_D37_AD5_DR5,
- GPIO_FN_D36_AD4_DR4,
- GPIO_FN_D35_AD3_DR3,
- GPIO_FN_D34_AD2_DR2,
- GPIO_FN_D33_AD1_DR1,
- GPIO_FN_D32_AD0_DR0,
- GPIO_FN_REQ1,
- GPIO_FN_REQ2,
- GPIO_FN_REQ3,
- GPIO_FN_GNT1,
- GPIO_FN_GNT2,
- GPIO_FN_GNT3,
- GPIO_FN_MMCCLK,
- GPIO_FN_D31,
- GPIO_FN_D30,
- GPIO_FN_D29,
- GPIO_FN_D28,
- GPIO_FN_D27,
- GPIO_FN_D26,
- GPIO_FN_D25,
- GPIO_FN_D24,
- GPIO_FN_D23,
- GPIO_FN_D22,
- GPIO_FN_D21,
- GPIO_FN_D20,
- GPIO_FN_D19,
- GPIO_FN_D18,
- GPIO_FN_D17,
- GPIO_FN_D16,
- GPIO_FN_SCIF1_SCK,
- GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_TXD,
- GPIO_FN_SCIF0_CTS,
- GPIO_FN_INTD,
- GPIO_FN_FCE,
- GPIO_FN_SCIF0_RTS,
- GPIO_FN_HSPI_CS,
- GPIO_FN_FSE,
- GPIO_FN_SCIF0_SCK,
- GPIO_FN_HSPI_CLK,
- GPIO_FN_FRE,
- GPIO_FN_SCIF0_RXD,
- GPIO_FN_HSPI_RX,
- GPIO_FN_FRB,
- GPIO_FN_SCIF0_TXD,
- GPIO_FN_HSPI_TX,
- GPIO_FN_FWE,
- GPIO_FN_SCIF5_TXD,
- GPIO_FN_HAC1_SYNC,
- GPIO_FN_SSI1_WS,
- GPIO_FN_SIOF_TXD_PJ,
- GPIO_FN_HAC0_SDOUT,
- GPIO_FN_SSI0_SDATA,
- GPIO_FN_SIOF_RXD_PJ,
- GPIO_FN_HAC0_SDIN,
- GPIO_FN_SSI0_SCK,
- GPIO_FN_SIOF_SYNC_PJ,
- GPIO_FN_HAC0_SYNC,
- GPIO_FN_SSI0_WS,
- GPIO_FN_SIOF_MCLK_PJ,
- GPIO_FN_HAC_RES,
- GPIO_FN_SIOF_SCK_PJ,
- GPIO_FN_HAC0_BITCLK,
- GPIO_FN_SSI0_CLK,
- GPIO_FN_HAC1_BITCLK,
- GPIO_FN_SSI1_CLK,
- GPIO_FN_TCLK,
- GPIO_FN_IOIS16,
- GPIO_FN_STATUS0,
- GPIO_FN_DRAK0_PK3,
- GPIO_FN_STATUS1,
- GPIO_FN_DRAK1_PK2,
- GPIO_FN_DACK2,
- GPIO_FN_SCIF2_TXD,
- GPIO_FN_MMCCMD,
- GPIO_FN_SIOF_TXD_PK,
- GPIO_FN_DACK3,
- GPIO_FN_SCIF2_SCK,
- GPIO_FN_MMCDAT,
- GPIO_FN_SIOF_SCK_PK,
- GPIO_FN_DREQ0,
- GPIO_FN_DREQ1,
- GPIO_FN_DRAK0_PK1,
- GPIO_FN_DRAK1_PK0,
- GPIO_FN_DREQ2,
- GPIO_FN_INTB,
- GPIO_FN_DREQ3,
- GPIO_FN_INTC,
- GPIO_FN_DRAK2,
- GPIO_FN_CE2A,
- GPIO_FN_IRL4,
- GPIO_FN_FD4,
- GPIO_FN_IRL5,
- GPIO_FN_FD5,
- GPIO_FN_IRL6,
- GPIO_FN_FD6,
- GPIO_FN_IRL7,
- GPIO_FN_FD7,
- GPIO_FN_DRAK3,
- GPIO_FN_CE2B,
- GPIO_FN_BREQ_BSACK,
- GPIO_FN_BACK_BSREQ,
- GPIO_FN_SCIF5_RXD,
- GPIO_FN_HAC1_SDIN,
- GPIO_FN_SSI1_SCK,
- GPIO_FN_SCIF5_SCK,
- GPIO_FN_HAC1_SDOUT,
- GPIO_FN_SSI1_SDATA,
- GPIO_FN_SCIF3_TXD,
- GPIO_FN_FCLE,
- GPIO_FN_SCIF3_RXD,
- GPIO_FN_FALE,
- GPIO_FN_SCIF3_SCK,
- GPIO_FN_FD0,
- GPIO_FN_SCIF4_TXD,
- GPIO_FN_FD1,
- GPIO_FN_SCIF4_RXD,
- GPIO_FN_FD2,
- GPIO_FN_SCIF4_SCK,
- GPIO_FN_FD3,
- GPIO_FN_DEVSEL_DCLKOUT,
- GPIO_FN_STOP_CDE,
- GPIO_FN_LOCK_ODDF,
- GPIO_FN_TRDY_DISPL,
- GPIO_FN_IRDY_HSYNC,
- GPIO_FN_PCIFRAME_VSYNC,
- GPIO_FN_INTA,
- GPIO_FN_GNT0_GNTIN,
- GPIO_FN_REQ0_REQOUT,
- GPIO_FN_PERR,
- GPIO_FN_SERR,
- GPIO_FN_WE7_CBE3,
- GPIO_FN_WE6_CBE2,
- GPIO_FN_WE5_CBE1,
- GPIO_FN_WE4_CBE0,
- GPIO_FN_SCIF2_RXD,
- GPIO_FN_SIOF_RXD,
- GPIO_FN_MRESETOUT,
- GPIO_FN_IRQOUT,
-};
-
-#endif /* __ASM_SH7785_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
deleted file mode 100644
index d6cce65b48713f..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7786.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on sh7785.h
- */
-
-#ifndef __CPU_SH7786_H__
-#define __CPU_SH7786_H__
-
-#include <linux/io.h>
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1,
-
- /* DU */
- GPIO_FN_DCLKIN, GPIO_FN_DCLKOUT, GPIO_FN_ODDF,
- GPIO_FN_VSYNC, GPIO_FN_HSYNC, GPIO_FN_CDE, GPIO_FN_DISP,
- GPIO_FN_DR0, GPIO_FN_DG0, GPIO_FN_DB0,
- GPIO_FN_DR1, GPIO_FN_DG1, GPIO_FN_DB1,
- GPIO_FN_DR2, GPIO_FN_DG2, GPIO_FN_DB2,
- GPIO_FN_DR3, GPIO_FN_DG3, GPIO_FN_DB3,
- GPIO_FN_DR4, GPIO_FN_DG4, GPIO_FN_DB4,
- GPIO_FN_DR5, GPIO_FN_DG5, GPIO_FN_DB5,
-
- /* Eth */
- GPIO_FN_ETH_MAGIC, GPIO_FN_ETH_LINK, GPIO_FN_ETH_TX_ER,
- GPIO_FN_ETH_TX_EN, GPIO_FN_ETH_MDIO, GPIO_FN_ETH_RX_CLK,
- GPIO_FN_ETH_MDC, GPIO_FN_ETH_COL, GPIO_FN_ETH_TX_CLK,
- GPIO_FN_ETH_CRS, GPIO_FN_ETH_RX_DV, GPIO_FN_ETH_RX_ER,
- GPIO_FN_ETH_TXD3, GPIO_FN_ETH_TXD2, GPIO_FN_ETH_TXD1, GPIO_FN_ETH_TXD0,
- GPIO_FN_ETH_RXD3, GPIO_FN_ETH_RXD2, GPIO_FN_ETH_RXD1, GPIO_FN_ETH_RXD0,
-
- /* HSPI */
- GPIO_FN_HSPI_CLK, GPIO_FN_HSPI_CS, GPIO_FN_HSPI_RX, GPIO_FN_HSPI_TX,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_SCK,
- GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_TXD,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF3 */
- GPIO_FN_SCIF3_SCK, GPIO_FN_SCIF3_RXD, GPIO_FN_SCIF3_TXD,
-
- /* SCIF4 */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* LBSC */
- GPIO_FN_BREQ, GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* FLCTL */
- GPIO_FN_FALE, GPIO_FN_FRB, GPIO_FN_FSTATUS,
- GPIO_FN_FSE, GPIO_FN_FCLE,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* USB */
- GPIO_FN_USB_OVC0, GPIO_FN_USB_PENC0,
- GPIO_FN_USB_OVC1, GPIO_FN_USB_PENC1,
-
- /* HAC */
- GPIO_FN_HAC_RES,
- GPIO_FN_HAC0_SDOUT, GPIO_FN_HAC0_SDIN,
- GPIO_FN_HAC0_SYNC, GPIO_FN_HAC0_BITCLK,
- GPIO_FN_HAC1_SDOUT, GPIO_FN_HAC1_SDIN,
- GPIO_FN_HAC1_SYNC, GPIO_FN_HAC1_BITCLK,
-
- /* SSI */
- GPIO_FN_SSI0_SDATA, GPIO_FN_SSI0_SCK, GPIO_FN_SSI0_WS, GPIO_FN_SSI0_CLK,
- GPIO_FN_SSI1_SDATA, GPIO_FN_SSI1_SCK, GPIO_FN_SSI1_WS, GPIO_FN_SSI1_CLK,
- GPIO_FN_SSI2_SDATA, GPIO_FN_SSI2_SCK, GPIO_FN_SSI2_WS,
- GPIO_FN_SSI3_SDATA, GPIO_FN_SSI3_SCK, GPIO_FN_SSI3_WS,
-
- /* SDIF1 */
- GPIO_FN_SDIF1CMD, GPIO_FN_SDIF1CD, GPIO_FN_SDIF1WP, GPIO_FN_SDIF1CLK,
- GPIO_FN_SDIF1D3, GPIO_FN_SDIF1D2, GPIO_FN_SDIF1D1, GPIO_FN_SDIF1D0,
-
- /* SDIF0 */
- GPIO_FN_SDIF0CMD, GPIO_FN_SDIF0CD, GPIO_FN_SDIF0WP, GPIO_FN_SDIF0CLK,
- GPIO_FN_SDIF0D3, GPIO_FN_SDIF0D2, GPIO_FN_SDIF0D1, GPIO_FN_SDIF0D0,
-
- /* TMU */
- GPIO_FN_TCLK,
-
- /* INTC */
- GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
-};
-
-static inline u32 sh7786_mm_sel(void)
-{
- return __raw_readl((const volatile void __iomem *)0xFC400020) & 0x7;
-}
-
-#endif /* __CPU_SH7786_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/shx3.h b/arch/sh/include/cpu-sh4/cpu/shx3.h
deleted file mode 100644
index f356810b0bea58..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/shx3.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SHX3_H
-#define __CPU_SHX3_H
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* SCIF */
- GPIO_FN_SCK3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_SCK2, GPIO_FN_TXD2, GPIO_FN_RXD2,
- GPIO_FN_SCK1, GPIO_FN_TXD1, GPIO_FN_RXD1,
- GPIO_FN_SCK0, GPIO_FN_TXD0, GPIO_FN_RXD0,
-
- /* LBSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_WE3, GPIO_FN_WE2, GPIO_FN_CS6, GPIO_FN_CS5,
- GPIO_FN_CS4, GPIO_FN_CLKOUTENB, GPIO_FN_BREQ,
- GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* INTC */
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_IRL3, GPIO_FN_IRL2, GPIO_FN_IRL1, GPIO_FN_IRL0,
- GPIO_FN_IRQOUT, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-};
-
-#endif /* __CPU_SHX3_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
deleted file mode 100644
index 2cc5f55dcaddf4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
-#define __ASM_CPU_SH4_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
deleted file mode 100644
index 81966e41fc213b..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sq.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/sq.h
- *
- * Copyright (C) 2001, 2002, 2003 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#ifndef __ASM_CPU_SH4_SQ_H
-#define __ASM_CPU_SH4_SQ_H
-
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
- * mapped to any physical address space. Since data is written (and aligned)
- * to 32-byte boundaries, we need to be sure that all allocations are aligned.
- */
-#define SQ_SIZE 32
-#define SQ_ALIGN_MASK (~(SQ_SIZE - 1))
-#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
-
-#define SQ_QACR0 (P4SEG_REG_BASE + 0x38)
-#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c)
-#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000)
-
-/* arch/sh/kernel/cpu/sh4/sq.c */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot);
-void sq_unmap(unsigned long vaddr);
-void sq_flush_range(unsigned long start, unsigned int len);
-
-#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
deleted file mode 100644
index fa7bcb398b8cca..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Sitdikov Valentin
- */
-#ifndef __ASM_CPU_SH4_WATCHDOG_H
-#define __ASM_CPU_SH4_WATCHDOG_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/* Prefix definition */
-#define WTBST_HIGH 0x55
-/* Register definitions */
-#define WTCNT_R 0xffcc0010 /*WDTCNT*/
-#define WTCSR 0xffcc0004 /*WDTCSR*/
-#define WTCNT 0xffcc0000 /*WDTST*/
-#define WTST WTCNT
-#define WTBST 0xffcc0008 /*WDTBST*/
-/* Register definitions */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define WTCNT 0xa4520000
-#define WTCSR 0xa4520004
-#else
-/* Register definitions */
-#define WTCNT 0xffc00008
-#define WTCSR 0xffc0000c
-#endif
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH4_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
deleted file mode 100644
index bdbbba8a784a7b..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMAE0_IRQ evt2irq(0x6c0)
-#define SH_DMAC_BASE0 0xFF608020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMTE8_IRQ evt2irq(0xd80)
-#define DMTE9_IRQ evt2irq(0xda0)
-#define DMTE10_IRQ evt2irq(0xdc0)
-#define DMTE11_IRQ evt2irq(0xde0)
-#define DMAE0_IRQ evt2irq(0x6c0) /* DMA Error IRQ */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFC818020
-#else /* SH7785 */
-#define DMTE0_IRQ evt2irq(0x620)
-#define DMTE4_IRQ evt2irq(0x6a0)
-#define DMTE6_IRQ evt2irq(0x880)
-#define DMTE8_IRQ evt2irq(0x8c0)
-#define DMTE9_IRQ evt2irq(0x8e0)
-#define DMTE10_IRQ evt2irq(0x900)
-#define DMTE11_IRQ evt2irq(0x920)
-#define DMAE0_IRQ evt2irq(0x6e0) /* DMA Error IRQ0 */
-#define DMAE1_IRQ evt2irq(0x940) /* DMA Error IRQ1 */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFCC08020
-#endif
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4a/cpu/serial.h b/arch/sh/include/cpu-sh4a/cpu/serial.h
deleted file mode 100644
index fc206c0bf6fb06..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/serial.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH4A_SERIAL_H
-#define __CPU_SH4A_SERIAL_H
-
-/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */
-extern struct plat_sci_port_ops sh7722_sci_port_ops;
-
-#endif /* __CPU_SH4A_SERIAL_H */
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
deleted file mode 100644
index fb44c299d0337e..00000000000000
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses. */
-#define PA_NORFLASH_ADDR 0x00000000
-#define PA_NORFLASH_SIZE 0x04000000
-
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x0010) /* PCI Connector detect control */
-#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR (PA_BCR+0x0900) /* */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF (-1)
-
-#define PA_BCR 0xa5000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
-#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
-#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x000a) /* PCI Connector detect control */
-#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
-#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
-#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
-#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
-#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
-#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
-#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
-#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
-#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
-#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
-#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
-#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
-#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
-#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
-#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
-#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
-
-#define PA_AX88796L 0xa5800400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_PCISCR (PA_BCR+0x0000)
-#define PA_IRLPRA (PA_BCR+0x0002)
-#define PA_IRLPRB (PA_BCR+0x0004)
-#define PA_IRLPRC (PA_BCR+0x0006)
-#define PA_IRLPRD (PA_BCR+0x0008)
-#define IRLCNTR1 (PA_BCR+0x0010)
-#define PA_IRLPRE (PA_BCR+0x000a)
-#define PA_IRLPRF (PA_BCR+0x000c)
-#define PA_EXIRLCR (PA_BCR+0x000e)
-#define PA_IRLMCR1 (PA_BCR+0x0010)
-#define PA_IRLMCR2 (PA_BCR+0x0012)
-#define PA_IRLSSR1 (PA_BCR+0x0014)
-#define PA_IRLSSR2 (PA_BCR+0x0016)
-#define PA_CFTCR (PA_BCR+0x0100)
-#define PA_CFPCR (PA_BCR+0x0102)
-#define PA_PCICR (PA_BCR+0x0110)
-#define PA_IVDRCTL (PA_BCR+0x0112)
-#define PA_IVDRSR (PA_BCR+0x0114)
-#define PA_PDRSTCR (PA_BCR+0x0116)
-#define PA_POFF (PA_BCR+0x0120)
-#define PA_LCDCR (PA_BCR+0x0130)
-#define PA_TPCR (PA_BCR+0x0140)
-#define PA_TPCKCR (PA_BCR+0x0142)
-#define PA_TPRSTR (PA_BCR+0x0144)
-#define PA_TPXPDR (PA_BCR+0x0146)
-#define PA_TPYPDR (PA_BCR+0x0148)
-#define PA_GPIOPFR (PA_BCR+0x0150)
-#define PA_GPIODR (PA_BCR+0x0152)
-#define PA_OBLED (PA_BCR+0x0154)
-#define PA_SWSR (PA_BCR+0x0156)
-#define PA_VERREG (PA_BCR+0x0158)
-#define PA_SMCR (PA_BCR+0x0200)
-#define PA_SMSMADR (PA_BCR+0x0202)
-#define PA_SMMR (PA_BCR+0x0204)
-#define PA_SMSADR1 (PA_BCR+0x0206)
-#define PA_SMSADR32 (PA_BCR+0x0244)
-#define PA_SMTRDR1 (PA_BCR+0x0246)
-#define PA_SMTRDR16 (PA_BCR+0x0264)
-#define PA_CU3MDR (PA_BCR+0x0300)
-#define PA_CU5MDR (PA_BCR+0x0302)
-#define PA_MMSR (PA_BCR+0x0400)
-
-#define IVDR_CK_ON 4 /* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE 200
-#define HL_NR_IRL 15
-
-#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#ifdef CONFIG_SH_R7785RP
-void highlander_plat_pinmux_setup(void);
-#else
-#define highlander_plat_pinmux_setup() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
deleted file mode 100644
index 71241f0d02a19c..00000000000000
--- a/arch/sh/include/mach-common/mach/hp6xx.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
- */
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-#include <linux/sh_intc.h>
-
-#define HP680_BTN_IRQ evt2irq(0x600) /* IRQ0_IRQ */
-#define HP680_TS_IRQ evt2irq(0x660) /* IRQ3_IRQ */
-#define HP680_HD64461_IRQ evt2irq(0x680) /* IRQ4_IRQ */
-
-#define DAC_LCD_BRIGHTNESS 0
-#define DAC_SPEAKER_VOLUME 1
-
-#define PGDR_OPENED 0x01
-#define PGDR_MAIN_BATTERY_OUT 0x04
-#define PGDR_PLAY_BUTTON 0x08
-#define PGDR_REWIND_BUTTON 0x10
-#define PGDR_RECORD_BUTTON 0x20
-
-#define PHDR_TS_PEN_DOWN 0x08
-
-#define PJDR_LED_BLINK 0x02
-
-#define PKDR_LED_GREEN 0x10
-
-/* HP Palmtop 620lx/660lx speaker on/off */
-#define PKDR_SPEAKER 0x20
-
-#define SCPDR_TS_SCAN_ENABLE 0x20
-#define SCPDR_TS_SCAN_Y 0x02
-#define SCPDR_TS_SCAN_X 0x01
-
-#define SCPCR_TS_ENABLE 0x405
-#define SCPCR_TS_MASK 0xc0f
-
-#define ADC_CHANNEL_TS_Y 1
-#define ADC_CHANNEL_TS_X 2
-#define ADC_CHANNEL_BATTERY 3
-#define ADC_CHANNEL_BACKUP 4
-#define ADC_CHANNEL_CHARGE 5
-
-/* HP Jornada 680/690 speaker on/off */
-#define HD64461_GPADR_SPEAKER 0x01
-#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF 0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
-#define HD64461_GPBDR_LED_RED 0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR 0xa4000130
-#define PKDR 0xa4000132
-
-#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/mach-common/mach/lboxre2.h b/arch/sh/include/mach-common/mach/lboxre2.h
deleted file mode 100644
index 5b6bb8e3cf2847..00000000000000
--- a/arch/sh/include/mach-common/mach/lboxre2.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LBOXRE2_H
-#define __ASM_SH_LBOXRE2_H
-
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 support
- */
-#include <linux/sh_intc.h>
-
-#define IRQ_CF1 evt2irq(0x320) /* CF1 */
-#define IRQ_CF0 evt2irq(0x340) /* CF0 */
-#define IRQ_INTD evt2irq(0x360) /* INTD */
-#define IRQ_ETH1 evt2irq(0x380) /* Ether1 */
-#define IRQ_ETH0 evt2irq(0x3a0) /* Ether0 */
-#define IRQ_INTA evt2irq(0x3c0) /* INTA */
-
-void init_lboxre2_IRQ(void);
-
-#define __IO_PREFIX lboxre2
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
deleted file mode 100644
index c2d218cea74b65..00000000000000
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/magicpanelr2.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * I/O addresses and bitmasks for Magic Panel Release 2 board
- */
-
-#ifndef __ASM_SH_MAGICPANELR2_H
-#define __ASM_SH_MAGICPANELR2_H
-
-#include <linux/gpio.h>
-
-#define __IO_PREFIX mpr2
-#include <asm/io_generic.h>
-
-
-#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
-
-
-#define PA_LED PORT_PADR /* LED */
-
-
-/* BSC */
-#define CMNCR 0xA4FD0000UL
-#define CS0BCR 0xA4FD0004UL
-#define CS2BCR 0xA4FD0008UL
-#define CS3BCR 0xA4FD000CUL
-#define CS4BCR 0xA4FD0010UL
-#define CS5ABCR 0xA4FD0014UL
-#define CS5BBCR 0xA4FD0018UL
-#define CS6ABCR 0xA4FD001CUL
-#define CS6BBCR 0xA4FD0020UL
-#define CS0WCR 0xA4FD0024UL
-#define CS2WCR 0xA4FD0028UL
-#define CS3WCR 0xA4FD002CUL
-#define CS4WCR 0xA4FD0030UL
-#define CS5AWCR 0xA4FD0034UL
-#define CS5BWCR 0xA4FD0038UL
-#define CS6AWCR 0xA4FD003CUL
-#define CS6BWCR 0xA4FD0040UL
-
-
-/* usb */
-
-#define PORT_UTRCTL 0xA405012CUL
-#define PORT_UCLKCR_W 0xA40A0008UL
-
-#define INTC_ICR0 0xA414FEE0UL
-#define INTC_ICR1 0xA4140010UL
-#define INTC_ICR2 0xA4140012UL
-
-/* MTD */
-
-#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
-#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
-
-#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/mach-common/mach/mangle-port.h b/arch/sh/include/mach-common/mach/mangle-port.h
deleted file mode 100644
index dd5a761a52ee63..00000000000000
--- a/arch/sh/include/mach-common/mach/mangle-port.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH version cribbed from the MIPS copy:
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __MACH_COMMON_MANGLE_PORT_H
-#define __MACH_COMMON_MANGLE_PORT_H
-
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time. Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses. The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) le16_to_cpu(x)
-# define __mem_ioswabw(x) (x)
-# define ioswabl(x) le32_to_cpu(x)
-# define __mem_ioswabl(x) (x)
-# define ioswabq(x) le64_to_cpu(x)
-# define __mem_ioswabq(x) (x)
-
-#else
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) (x)
-# define __mem_ioswabw(x) cpu_to_le16(x)
-# define ioswabl(x) (x)
-# define __mem_ioswabl(x) cpu_to_le32(x)
-# define ioswabq(x) (x)
-# define __mem_ioswabq(x) cpu_to_le32(x)
-
-#endif
-
-#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
deleted file mode 100644
index 0e2f9ab1197620..00000000000000
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA. should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
-#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts. i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA 8
-#define MICRODEV_IRQ_PCI_INTB 9
-#define MICRODEV_IRQ_PCI_INTC 10
-#define MICRODEV_IRQ_PCI_INTD 11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
deleted file mode 100644
index 0d7e483c7d3f53..00000000000000
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
-#define PA_CFCTL 0xa4000004 /* CF Timing control */
-#define PA_CFPOW 0xa4000006 /* CF Power control */
-#define PA_DISPCTL 0xa4000008 /* Display Timing control */
-#define PA_SDMPOW 0xa400000a /* SD Power control */
-#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extension detect control */
-#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
-#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */
-#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
-#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */
-#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-
-#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
-#define PA_VERREG 0xa4000032 /* FPGA Version Register */
-#define PA_INPORT 0xa4000034 /* KEY Input Port control */
-#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_BVERREG 0xa4000038 /* Board Revision Register */
-
-#define PA_AX88796L 0xaa000400 /* AX88796L Area */
-#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE 100
-
-#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
deleted file mode 100644
index 1915714263aab0..00000000000000
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* do nothing here by default */
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-common/mach/sdk7780.h b/arch/sh/include/mach-common/mach/sdk7780.h
deleted file mode 100644
index a27dbe4184b35b..00000000000000
--- a/arch/sh/include/mach-common/mach/sdk7780.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SDK7780_H
-#define __ASM_SH_RENESAS_SDK7780_H
-
-/*
- * linux/include/asm-sh/sdk7780.h
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa0800000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_USER PA_EXT4 /* User Expansion Space */
-
-#define PA_PERIPHERAL PA_AREA5_IO
-
-/* SRAM/Reserved */
-#define PA_RESERVED (PA_PERIPHERAL + 0)
-/* FPGA base address */
-#define PA_FPGA (PA_PERIPHERAL + 0x01000000)
-/* SMC LAN91C111 */
-#define PA_LAN (PA_PERIPHERAL + 0x01800000)
-
-
-#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */
-#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */
-#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */
-#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */
-#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */
-#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */
-#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */
-#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */
-#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */
-#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */
-#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */
-#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */
-#define PA_LED FPGA_SLEDR
-#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */
-#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */
-#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */
-#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */
-#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */
-#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */
-#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */
-#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */
-#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */
-#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */
-#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */
-#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */
-
-
-#define SDK7780_NR_IRL 15
-/* IDE/ATA interrupt */
-#define IRQ_CFCARD evt2irq(0x3c0)
-/* SMC interrupt */
-#define IRQ_ETHERNET evt2irq(0x2c0)
-
-
-/* arch/sh/boards/renesas/sdk7780/irq.c */
-void init_sdk7780_IRQ(void);
-
-#define __IO_PREFIX sdk7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/mach-common/mach/secureedge5410.h b/arch/sh/include/mach-common/mach/secureedge5410.h
deleted file mode 100644
index dfc68aa910033d..00000000000000
--- a/arch/sh/include/mach-common/mach/secureedge5410.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#define __IO_PREFIX snapgear
-#include <asm/io_generic.h>
-
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit Read Write
- * -----------------------------------------------
- * D0 DCD on ttySC1 power
- * D1 Reset Switch heatbeat
- * D2 ttySC0 CTS (7100) LAN
- * D3 - WAN
- * D4 ttySC0 DCD (7100) CONSOLE
- * D5 - ONLINE
- * D6 - VPN
- * D7 - DTR on ttySC1
- * D8 - ttySC0 RTS (7100)
- * D9 - ttySC0 DTR (7100)
- * D10 - RTC SCLK
- * D11 RTC DATA RTC DATA
- * D12 - RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/sh2007.h b/arch/sh/include/mach-common/mach/sh2007.h
deleted file mode 100644
index eeb12901a44a1b..00000000000000
--- a/arch/sh/include/mach-common/mach/sh2007.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SH2007_H
-#define __MACH_SH2007_H
-
-#define CS5BCR 0xff802050
-#define CS5WCR 0xff802058
-#define CS5PCR 0xff802070
-
-#define BUS_SZ8 1
-#define BUS_SZ16 2
-#define BUS_SZ32 3
-
-#define PCMCIA_IODYN 1
-#define PCMCIA_ATA 0
-#define PCMCIA_IO8 2
-#define PCMCIA_IO16 3
-#define PCMCIA_COMM8 4
-#define PCMCIA_COMM16 5
-#define PCMCIA_ATTR8 6
-#define PCMCIA_ATTR16 7
-
-#define TYPE_SRAM 0
-#define TYPE_PCMCIA 4
-
-/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWW5 0
-#define IWW6 3
-/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWD5 2
-#define IWRWD6 2
-/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWS5 2
-#define IWRWS6 2
-/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRD5 2
-#define IWRRD6 2
-/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRS5 0
-#define IWRRS6 2
-/* burst count (0-3:4,8,16,32) */
-#define BST5 0
-#define BST6 0
-/* bus size */
-#define SZ5 BUS_SZ16
-#define SZ6 BUS_SZ16
-/* RD hold for SRAM (0-1:0,1) */
-#define RDSPL5 0
-#define RDSPL6 0
-/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
-#define BW5 0
-#define BW6 0
-/* Multiplex (0-1:0,1) */
-#define MPX5 0
-#define MPX6 0
-/* device type */
-#define TYPE5 TYPE_PCMCIA
-#define TYPE6 TYPE_PCMCIA
-/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADS5 0
-#define ADS6 0
-/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADH5 0
-#define ADH6 0
-/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDS5 0
-#define RDS6 0
-/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDH5 0
-#define RDH6 0
-/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTS5 0
-#define WTS6 0
-/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTH5 0
-#define WTH6 0
-/* BS hold (0-1:1,2) */
-#define BSH5 0
-#define BSH6 0
-/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define IW5 6 /* 60ns PIO mode 4 */
-#define IW6 15 /* 250ns */
-
-#define SAA5 PCMCIA_IODYN /* IDE area b4000000-b5ffffff */
-#define SAB5 PCMCIA_IODYN /* CF area b6000000-b7ffffff */
-#define PCWA5 0 /* additional wait A (0-3:0,15,30,50) */
-#define PCWB5 0 /* additional wait B (0-3:0,15,30,50) */
-/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define PCIW5 12
-/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEDA5 2
-/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEDB5 4
-/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEHA5 2
-/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEHB5 3
-
-#define CS5BCR_D ((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)| \
- (IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)| \
- (SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
-#define CS5WCR_D ((ADS5<<28)|(ADH5<<24)|(RDS5<<20)| \
- (RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
-#define CS5PCR_D ((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)| \
- (PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)| \
- (TEDB5<<8)|(TEHA5<<4)|TEHB5)
-
-#define SMC0_BASE 0xb0800000 /* eth0 */
-#define SMC1_BASE 0xb0900000 /* eth1 */
-#define CF_BASE 0xb6100000 /* Compact Flash (I/O area) */
-#define IDE_BASE 0xb4000000 /* IDE */
-#define PC104_IO_BASE 0xb8000000
-#define PC104_MEM_BASE 0xba000000
-#define SMC_IO_SIZE 0x100
-
-#define CF_OFFSET 0x1f0
-#define IDE_OFFSET 0x170
-
-#endif /* __MACH_SH2007_H */
diff --git a/arch/sh/include/mach-common/mach/sh7763rdp.h b/arch/sh/include/mach-common/mach/sh7763rdp.h
deleted file mode 100644
index 301f85a1c044d2..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7763rdp.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH7763RDP_H
-#define __ASM_SH_SH7763RDP_H
-
-/*
- * linux/include/asm-sh/sh7763drp.h
- *
- * Copyright (C) 2008 Renesas Solutions
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <asm/addrspace.h>
-
-/* clock control */
-#define MSTPCR1 0xFFC80038
-
-/* PORT */
-#define PORT_PSEL0 0xFFEF0070
-#define PORT_PSEL1 0xFFEF0072
-#define PORT_PSEL2 0xFFEF0074
-#define PORT_PSEL3 0xFFEF0076
-#define PORT_PSEL4 0xFFEF0078
-
-#define PORT_PACR 0xFFEF0000
-#define PORT_PCCR 0xFFEF0004
-#define PORT_PFCR 0xFFEF000A
-#define PORT_PGCR 0xFFEF000C
-#define PORT_PHCR 0xFFEF000E
-#define PORT_PICR 0xFFEF0010
-#define PORT_PJCR 0xFFEF0012
-#define PORT_PKCR 0xFFEF0014
-#define PORT_PLCR 0xFFEF0016
-#define PORT_PMCR 0xFFEF0018
-#define PORT_PNCR 0xFFEF001A
-
-/* FPGA */
-#define CPLD_BOARD_ID_ERV_REG 0xB1000000
-#define CPLD_CPLD_CMD_REG 0xB1000006
-
-/*
- * USB SH7763RDP board can use Host only.
- */
-#define USB_USBHSC 0xFFEC80f0
-
-/* arch/sh/boards/renesas/sh7763rdp/irq.c */
-void init_sh7763rdp_IRQ(void);
-int sh7763rdp_irq_demux(int irq);
-#define __IO_PREFIX sh7763rdp
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
deleted file mode 100644
index 0f3dc3a1329e36..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SH7785LCR_H
-#define __ASM_SH_RENESAS_SH7785LCR_H
-
-/*
- * This board has 2 physical memory maps.
- * It can be changed with DIP switch(S2-5).
- *
- * phys address | S2-5 = OFF | S2-5 = ON
- * -----------------------------+---------------+---------------
- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
- * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
- * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
- * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
- * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
- * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
- * 0x14000000 - 0x17ffffff(CS5) | reserved | USB
- * 0x18000000 - 0x1bffffff(CS6) | reserved | SD
- * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
- *
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define PLD_BASE_ADDR 0x04000000
-#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
-#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
-#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
-#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
-#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
-#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
-#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
-#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
-
-#define PCA9564_ADDR 0x06000000 /* I2C */
-#define PCA9564_SIZE 0x00000100
-
-#define PCA9564_PROTO_32BIT_ADDR 0x14000000
-
-#define SM107_MEM_ADDR 0x10000000
-#define SM107_MEM_SIZE 0x00e00000
-#define SM107_REG_ADDR 0x13e00000
-#define SM107_REG_SIZE 0x00200000
-
-#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
-#define R8A66597_ADDR 0x14000000 /* USB */
-#define CG200_ADDR 0x18000000 /* SD */
-#else
-#define R8A66597_ADDR 0x08000000
-#define CG200_ADDR 0x0c000000
-#endif
-
-#define R8A66597_SIZE 0x00000100
-#define CG200_SIZE 0x00010000
-
-#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
-
diff --git a/arch/sh/include/mach-common/mach/shmin.h b/arch/sh/include/mach-common/mach/shmin.h
deleted file mode 100644
index c2c3e26d145312..00000000000000
--- a/arch/sh/include/mach-common/mach/shmin.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
deleted file mode 100644
index 54df351de5e40d..00000000000000
--- a/arch/sh/include/mach-common/mach/titan.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Platform definitions for Titan
- */
-#ifndef _ASM_SH_TITAN_H
-#define _ASM_SH_TITAN_H
-
-#include <linux/sh_intc.h>
-
-#define __IO_PREFIX titan
-#include <asm/io_generic.h>
-
-/* IRQ assignments */
-#define TITAN_IRQ_WAN evt2irq(0x240) /* eth0 (WAN) */
-#define TITAN_IRQ_LAN evt2irq(0x2a0) /* eth1 (LAN) */
-#define TITAN_IRQ_MPCIA evt2irq(0x300) /* mPCI A */
-#define TITAN_IRQ_MPCIB evt2irq(0x360) /* mPCI B */
-#define TITAN_IRQ_USB evt2irq(0x360) /* USB */
-
-#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h
deleted file mode 100644
index 6c9bff3f93f143..00000000000000
--- a/arch/sh/include/mach-common/mach/urquell.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_URQUELL_H
-#define __MACH_URQUELL_H
-
-/*
- * ------ 0x00000000 ------------------------------------
- * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
- * -----+ 0x04000000 ------------------------------------
- * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
- * -----+ 0x08000000 ------------------------------------
- * CS2 | DDR3
- * CS3 |
- * -----+ 0x10000000 ------------------------------------
- * CS4 | PCIe
- * -----+ 0x14000000 ------------------------------------
- * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
- * -----+ 0x18000000 ------------------------------------
- * CS6 | ATA, NAND FLASH
- * -----+ 0x1c000000 ------------------------------------
- * CS7 | SH7786 register
- * -----+------------------------------------------------
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define CS1_BASE 0x05000000
-#define CS5_BASE 0x15000000
-#define FPGA_BASE CS1_BASE
-
-#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
-#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
-
-#define SRSTR_OFS 0x0000 /* System reset register */
-#define BDMR_OFS 0x0010 /* Board operating mode resister */
-#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
-#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
-#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
-#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
-#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
-#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
-#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
-#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
-#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
-#define SLEDR_OFS 0x0130 /* LED control resister */
-#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
-#define FPVERR_OFS 0x0150 /* FPGA Version register */
-#define FPDATER_OFS 0x0160 /* FPGA Date register */
-#define FPYEARR_OFS 0x0170 /* FPGA Year register */
-#define TCLKCR_OFS 0x0180 /* TCLK Control register */
-#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
-#define FPODR_OFS 0x1010 /* Output port data register */
-#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
-#define FPINDR_OFS 0x1030 /* Input port data register */
-#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
-#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
-#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
-#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
-#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
-#define LATCHCR_OFS 0x3000 /* Latch control register */
-#define LATCUAR_OFS 0x3010 /* Latch upper address register */
-#define LATCLAR_OFS 0x3012 /* Latch lower address register */
-#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
-#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
-
-#define CHARLED_OFS 0x2000 /* Character LED */
-
-#endif /* __MACH_URQUELL_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
deleted file mode 100644
index a773a763843aaa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/dma.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/dma.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_DMA_H
-#define __ASM_SH_DREAMCAST_DMA_H
-
-/* Number of DMA channels */
-#define G2_NR_DMA_CHANNELS 4
-
-/* Channels for cascading */
-#define PVR2_CASCADE_CHAN 2
-#define G2_CASCADE_CHAN 3
-
-/* PVR2 DMA Registers */
-#define PVR2_DMA_BASE 0xa05f6800
-#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0)
-#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4)
-#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8)
-#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132)
-#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136)
-
-/* G2 DMA Register */
-#define G2_DMA_BASE 0xa05f7800
-
-#endif /* __ASM_SH_DREAMCAST_DMA_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
deleted file mode 100644
index 169bdf415d89aa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/maple.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MAPLE_H
-#define __ASM_MAPLE_H
-
-#define MAPLE_PORTS 4
-#define MAPLE_PNP_INTERVAL HZ
-#define MAPLE_MAXPACKETS 8
-#define MAPLE_DMA_ORDER 14
-#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
-#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
- MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
-
-/* Maple Bus registers */
-#define MAPLE_BASE 0xa05f6c00
-#define MAPLE_DMAADDR (MAPLE_BASE+0x04)
-#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
-#define MAPLE_ENABLE (MAPLE_BASE+0x14)
-#define MAPLE_STATE (MAPLE_BASE+0x18)
-#define MAPLE_SPEED (MAPLE_BASE+0x80)
-#define MAPLE_RESET (MAPLE_BASE+0x8c)
-
-#define MAPLE_MAGIC 0x6155404f
-#define MAPLE_2MBPS 0
-#define MAPLE_TIMEOUT(n) ((n)<<15)
-
-/* Function codes */
-#define MAPLE_FUNC_CONTROLLER 0x001
-#define MAPLE_FUNC_MEMCARD 0x002
-#define MAPLE_FUNC_LCD 0x004
-#define MAPLE_FUNC_CLOCK 0x008
-#define MAPLE_FUNC_MICROPHONE 0x010
-#define MAPLE_FUNC_ARGUN 0x020
-#define MAPLE_FUNC_KEYBOARD 0x040
-#define MAPLE_FUNC_LIGHTGUN 0x080
-#define MAPLE_FUNC_PURUPURU 0x100
-#define MAPLE_FUNC_MOUSE 0x200
-
-#endif /* __ASM_MAPLE_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
deleted file mode 100644
index c037c1ec63a928..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/pci.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <mach-dreamcast/mach/sysasic.h>
-
-#define GAPSPCI_REGS 0x01001400
-#define GAPSPCI_DMA_BASE 0x01840000
-#define GAPSPCI_DMA_SIZE 32768
-#define GAPSPCI_BBA_CONFIG 0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE 0x2000
-
-#define GAPSPCI_IRQ HW_EVENT_EXTERNAL
-
-extern struct pci_ops gapspci_pci_ops;
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
deleted file mode 100644
index ed69ce7f203012..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/sysasic.h
- *
- * Definitions for the Dreamcast System ASIC and related peripherals.
- *
- * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
-#define __ASM_SH_DREAMCAST_SYSASIC_H
-
-#include <asm/irq.h>
-
-/* Hardware events -
-
- Each of these events correspond to a bit within the Event Mask Registers/
- Event Status Registers. Because of the virtual IRQ numbering scheme, a
- base offset must be used when calculating the virtual IRQ that each event
- takes.
-*/
-
-#define HW_EVENT_IRQ_BASE 48
-
-/* IRQ 13 */
-#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */
-#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
-#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
-#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
-#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
-
-/* IRQ 11 */
-#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
-#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
-#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
-
-#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
-
-/* arch/sh/boards/mach-dreamcast/irq.c */
-extern int systemasic_irq_demux(int);
-extern void systemasic_irq_init(void);
-
-#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
-
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
deleted file mode 100644
index 2d685cc2d54ced..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2009 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
-LIST "--------------------------------"
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-LIST "--------------------------------"
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "MMU"
-ED 0xff000010, 0x00000004
-
-LIST "setup clocks"
-ED 0xa4150024, 0x00004000
-ED 0xa4150000, 0x8E003508
-
-WAIT 1
-
-LIST "BSC"
-ED 0xff800020, 0xa5a50000
-ED 0xfec10000, 0x00001013
-ED 0xfec10004, 0x11110400
-ED 0xfec10024, 0x00000440
-
-WAIT 1
-
-LIST "setup sdram"
-ED 0xfd000108, 0x00000181
-ED 0xfd000020, 0x015B0002
-ED 0xfd000030, 0x03061502
-ED 0xfd000034, 0x02020102
-ED 0xfd000038, 0x01090305
-ED 0xfd00003c, 0x00000002
-ED 0xfd000008, 0x00000005
-ED 0xfd000018, 0x00000001
-
-WAIT 1
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000060, 0x00020000
-ED 0xfd000060, 0x00030000
-ED 0xfd000060, 0x00010040
-ED 0xfd000060, 0x00000532
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000014, 0x00000004
-ED 0xfd000060, 0x00000432
-ED 0xfd000060, 0x000103C0
-ED 0xfd000060, 0x00010040
-
-WAIT 1
-
-ED 0xfd000010, 0x00000001
-ED 0xfd000044, 0x00000613
-ED 0xfd000048, 0x238C003A
-ED 0xfd000014, 0x00000002
-
-LIST "Dummy read"
-DD 0x0c400000, 0x0c400000
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000108, 0x00000080
-ED 0xfd000040, 0x00010000
-
-WAIT 1
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
-
-LIST "disable USB"
-EW 0xA4D80000, 0x0000
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
deleted file mode 100644
index 2da6ff326cbd0a..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* EcoVec board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1 : .long 0xa8000000
-2 :
-
-#else /* __ASSEMBLY__ */
-
-/* Ecovec board specific information:
- *
- * Set the following to enable MMCIF boot from the MMC card in CN12:
- *
- * DS1.5 = OFF (SH BOOT pin set to L)
- * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
- * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1)
- *
- */
-#define HIZCRA 0xa4050158
-#define PGDR 0xa405012c
-
-static inline void mmcif_update_progress(int nr)
-{
- /* disable Hi-Z for LED pins */
- __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
-
- /* update progress on LED4, LED5, LED6 and LED7 */
- __raw_writeb(1 << (nr - 1), PGDR);
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
deleted file mode 100644
index 0e97473afe0bb9..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KFR2R09_H
-#define __ASM_SH_KFR2R09_H
-
-#include <video/sh_mobile_lcdc.h>
-
-#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-#else
-static int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
- return -ENODEV;
-}
-static void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
-}
-#endif
-
-#endif /* __ASM_SH_KFR2R09_H */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
deleted file mode 100644
index a67b1926be222e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
-LIST "set up enough of the kfr2r09 hardware to boot the kernel"
-
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "invalidate instruction cache"
-ED 0xff00001c, 0x00000800
-
-LIST "invalidate TLBs"
-ED 0xff000010, 0x00000004
-
-LIST "select mode for cs5 + cs6"
-ED 0xff800020, 0xa5a50001
-ED 0xfec10000, 0x0000001b
-
-LIST "setup clocks"
-LIST "The PLL and FLL values are updated here for the optimal"
-LIST "RF frequency and improved reception sensitivity."
-ED 0xa4150004, 0x00000050
-ED 0xa4150000, 0x91053508
-WAIT 1
-ED 0xa4150050, 0x00000340
-ED 0xa4150024, 0x00005000
-
-LIST "setup pins"
-EB 0xa4050120, 0x00
-EB 0xa4050122, 0x00
-EB 0xa4050124, 0x00
-EB 0xa4050126, 0x00
-EB 0xa4050128, 0xA0
-EB 0xa405012A, 0x10
-EB 0xa405012C, 0x00
-EB 0xa405012E, 0x00
-EB 0xa4050130, 0x00
-EB 0xa4050132, 0x00
-EB 0xa4050134, 0x01
-EB 0xa4050136, 0x40
-EB 0xa4050138, 0x00
-EB 0xa405013A, 0x00
-EB 0xa405013C, 0x00
-EB 0xa405013E, 0x20
-EB 0xa4050160, 0x00
-EB 0xa4050162, 0x40
-EB 0xa4050164, 0x03
-EB 0xa4050166, 0x00
-EB 0xa4050168, 0x00
-EB 0xa405016A, 0x00
-EB 0xa405016C, 0x00
-
-EW 0xa405014E, 0x5660
-EW 0xa4050150, 0x0145
-EW 0xa4050152, 0x1550
-EW 0xa4050154, 0x0200
-EW 0xa4050156, 0x0040
-
-EW 0xa4050158, 0x0000
-EW 0xa405015a, 0x0000
-EW 0xa405015c, 0x0000
-EW 0xa405015e, 0x0000
-
-EW 0xa4050180, 0x0000
-EW 0xa4050182, 0x8002
-EW 0xa4050184, 0x0000
-
-EW 0xa405018a, 0x9991
-EW 0xa405018c, 0x8011
-EW 0xa405018e, 0x9550
-
-EW 0xa4050100, 0x0000
-EW 0xa4050102, 0x5540
-EW 0xa4050104, 0x0000
-EW 0xa4050106, 0x0000
-EW 0xa4050108, 0x4550
-EW 0xa405010a, 0x0130
-EW 0xa405010c, 0x0555
-EW 0xa405010e, 0x0000
-EW 0xa4050110, 0x0000
-EW 0xa4050112, 0xAAA8
-EW 0xa4050114, 0x8305
-EW 0xa4050116, 0x10F0
-EW 0xa4050118, 0x0F50
-EW 0xa405011a, 0x0000
-EW 0xa405011c, 0x0000
-EW 0xa405011e, 0x0555
-EW 0xa4050140, 0x0000
-EW 0xa4050142, 0x5141
-EW 0xa4050144, 0x5005
-EW 0xa4050146, 0xAAA9
-EW 0xa4050148, 0xFAA9
-EW 0xa405014a, 0x3000
-EW 0xa405014c, 0x0000
-
-LIST "setup sdram"
-ED 0xFD000108, 0x40000301
-ED 0xFD000020, 0x011B0002
-ED 0xFD000030, 0x03060E02
-ED 0xFD000034, 0x01020102
-ED 0xFD000038, 0x01090406
-ED 0xFD000008, 0x00000004
-ED 0xFD000040, 0x00000001
-ED 0xFD000040, 0x00000000
-ED 0xFD000018, 0x00000001
-
-WAIT 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000060, 0x00000032
-ED 0xFD000060, 0x00020000
-ED 0xFD000014, 0x00000004
-ED 0xFD000014, 0x00000004
-ED 0xFD000010, 0x00000001
-ED 0xFD000044, 0x000004AF
-ED 0xFD000048, 0x20CF0037
-
-LIST "read 16 bytes from sdram"
-DD 0xa8000000, 0xa8000000, 1
-DD 0xa8000004, 0xa8000004, 1
-DD 0xa8000008, 0xa8000008, 1
-DD 0xa800000c, 0xa800000c, 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000014, 0x00000004
-ED 0xFD000108, 0x40000300
-ED 0xFD000040, 0x00010000
-
-LIST "write to internal ram"
-ED 0xfd8007fc, 0
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
deleted file mode 100644
index 209275872ff06e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* kfr2r09 board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 0xa8000000
-2:
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
deleted file mode 100644
index b954de617b4970..00000000000000
--- a/arch/sh/include/mach-landisk/mach/gio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LANDISK_GIO_H
-#define __ASM_SH_LANDISK_GIO_H
-
-#include <linux/ioctl.h>
-
-/* version */
-#define VERSION_STR "1.00"
-
-/* Driver name */
-#define GIO_DRIVER_NAME "/dev/giodrv"
-
-/* Use 'k' as magic number */
-#define GIODRV_IOC_MAGIC 'k'
-
-#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0)
-/*
- * S means "Set" through a ptr,
- * T means "Tell" directly
- * G means "Get" (to a pointed var)
- * Q means "Query", response is on the return value
- * X means "eXchange": G and S atomically
- * H means "sHift": T and Q atomically
- */
-#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *)
-#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *)
-#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *)
-#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *)
-#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *)
-#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *)
-#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *)
-#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
-#define GIODRV_IOC_MAXNR 8
-
-#define GIO_READ 0x00000000
-#define GIO_WRITE 0x00000001
-
-#endif /* __ASM_SH_LANDISK_GIO_H */
diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
deleted file mode 100644
index b41308c94d1e94..00000000000000
--- a/arch/sh/include/mach-landisk/mach/iodata_landisk.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IODATA_LANDISK_H
-#define __ASM_SH_IODATA_LANDISK_H
-
-/*
- * arch/sh/include/mach-landisk/mach/iodata_landisk.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * IO-DATA LANDISK support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_USB 0xa4000000 /* USB Controller M66590 */
-
-#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */
-#define PA_LED 0xb0000001 /* LED Control Register */
-#define PA_STATUS 0xb0000002 /* Switch Status Register */
-#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */
-#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */
-#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */
-/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */
-#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */
-
-#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */
-#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */
-
-#define IRQ_PCIINTA evt2irq(0x2a0) /* PCI INTA IRQ */
-#define IRQ_PCIINTB evt2irq(0x2c0) /* PCI INTB IRQ */
-#define IRQ_PCIINTC evt2irq(0x2e0) /* PCI INTC IRQ */
-#define IRQ_PCIINTD evt2irq(0x300) /* PCI INTD IRQ */
-#define IRQ_ATA evt2irq(0x320) /* ATA IRQ */
-#define IRQ_FATA evt2irq(0x340) /* FATA IRQ */
-#define IRQ_POWER evt2irq(0x360) /* Power Switch IRQ */
-#define IRQ_BUTTON evt2irq(0x380) /* USL-5P Button IRQ */
-#define IRQ_FAULT evt2irq(0x3a0) /* USL-5P Fault IRQ */
-
-void init_landisk_IRQ(void);
-
-#define __IO_PREFIX landisk
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_IODATA_LANDISK_H */
-
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
deleted file mode 100644
index 2a422b778e008f..00000000000000
--- a/arch/sh/include/mach-migor/mach/migor.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-#define PORT_MSELCRA 0xa4050180
-#define PORT_MSELCRB 0xa4050182
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
deleted file mode 100644
index 76c2e84893cc61..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_FPGA_H
-#define __MACH_SDK7786_FPGA_H
-
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#define SRSTR 0x000
-#define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
-
-#define INTASR 0x010
-#define INTAMR 0x020
-#define MODSWR 0x030
-#define INTTESTR 0x040
-#define SYSSR 0x050
-#define NRGPR 0x060
-
-#define NMISR 0x070
-#define NMISR_MAN_NMI BIT(0)
-#define NMISR_AUX_NMI BIT(1)
-#define NMISR_MASK (NMISR_MAN_NMI | NMISR_AUX_NMI)
-
-#define NMIMR 0x080
-#define NMIMR_MAN_NMIM BIT(0) /* Manual NMI mask */
-#define NMIMR_AUX_NMIM BIT(1) /* Auxiliary NMI mask */
-#define NMIMR_MASK (NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
-
-#define INTBSR 0x090
-#define INTBMR 0x0a0
-#define USRLEDR 0x0b0
-#define MAPSWR 0x0c0
-#define FPGAVR 0x0d0
-#define FPGADR 0x0e0
-#define PCBRR 0x0f0
-#define RSR 0x100
-#define EXTASR 0x110
-#define SPCAR 0x120
-#define INTMSR 0x130
-
-#define PCIECR 0x140
-#define PCIECR_PCIEMUX1 BIT(15)
-#define PCIECR_PCIEMUX0 BIT(14)
-#define PCIECR_PRST4 BIT(12) /* slot 4 card present */
-#define PCIECR_PRST3 BIT(11) /* slot 3 card present */
-#define PCIECR_PRST2 BIT(10) /* slot 2 card present */
-#define PCIECR_PRST1 BIT(9) /* slot 1 card present */
-#define PCIECR_CLKEN BIT(4) /* oscillator enable */
-
-#define FAER 0x150
-#define USRGPIR 0x160
-
-/* 0x170 reserved */
-
-#define LCLASR 0x180
-#define LCLASR_FRAMEN BIT(15)
-
-#define LCLASR_FPGA_SEL_SHIFT 12
-#define LCLASR_NAND_SEL_SHIFT 8
-#define LCLASR_NORB_SEL_SHIFT 4
-#define LCLASR_NORA_SEL_SHIFT 0
-
-#define LCLASR_AREA_MASK 0x7
-
-#define LCLASR_FPGA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_FPGA_SEL_SHIFT)
-#define LCLASR_NAND_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NAND_SEL_SHIFT)
-#define LCLASR_NORB_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORB_SEL_SHIFT)
-#define LCLASR_NORA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORA_SEL_SHIFT)
-
-#define SBCR 0x190
-#define SCBR_I2CMEN BIT(0) /* FPGA I2C master enable */
-#define SCBR_I2CCEN BIT(1) /* CPU I2C master enable */
-
-#define PWRCR 0x1a0
-#define PWRCR_SCISEL0 BIT(0)
-#define PWRCR_SCISEL1 BIT(1)
-#define PWRCR_SCIEN BIT(2) /* Serial port enable */
-#define PWRCR_PDWNACK BIT(5) /* Power down acknowledge */
-#define PWRCR_PDWNREQ BIT(7) /* Power down request */
-#define PWRCR_INT2 BIT(11) /* INT2 connection to power manager */
-#define PWRCR_BUPINIT BIT(13) /* DDR backup initialize */
-#define PWRCR_BKPRST BIT(15) /* Backup power reset */
-
-#define SPCBR 0x1b0
-#define SPICR 0x1c0
-#define SPIDR 0x1d0
-#define I2CCR 0x1e0
-#define I2CDR 0x1f0
-#define FPGACR 0x200
-#define IASELR1 0x210
-#define IASELR2 0x220
-#define IASELR3 0x230
-#define IASELR4 0x240
-#define IASELR5 0x250
-#define IASELR6 0x260
-#define IASELR7 0x270
-#define IASELR8 0x280
-#define IASELR9 0x290
-#define IASELR10 0x2a0
-#define IASELR11 0x2b0
-#define IASELR12 0x2c0
-#define IASELR13 0x2d0
-#define IASELR14 0x2e0
-#define IASELR15 0x2f0
-/* 0x300 reserved */
-#define IBSELR1 0x310
-#define IBSELR2 0x320
-#define IBSELR3 0x330
-#define IBSELR4 0x340
-#define IBSELR5 0x350
-#define IBSELR6 0x360
-#define IBSELR7 0x370
-#define IBSELR8 0x380
-#define IBSELR9 0x390
-#define IBSELR10 0x3a0
-#define IBSELR11 0x3b0
-#define IBSELR12 0x3c0
-#define IBSELR13 0x3d0
-#define IBSELR14 0x3e0
-#define IBSELR15 0x3f0
-#define USRACR 0x400
-#define BEEPR 0x410
-#define USRLCDR 0x420
-#define SMBCR 0x430
-#define SMBDR 0x440
-#define USBCR 0x450
-#define AMSR 0x460
-#define ACCR 0x470
-#define SDIFCR 0x480
-
-/* arch/sh/boards/mach-sdk7786/fpga.c */
-extern void __iomem *sdk7786_fpga_base;
-extern void sdk7786_fpga_init(void);
-
-/* arch/sh/boards/mach-sdk7786/nmi.c */
-extern void sdk7786_nmi_init(void);
-
-#define SDK7786_FPGA_REGADDR(reg) (sdk7786_fpga_base + (reg))
-
-/*
- * A convenience wrapper from register offset to internal I2C address,
- * when the FPGA is in I2C slave mode.
- */
-#define SDK7786_FPGA_I2CADDR(reg) ((reg) >> 3)
-
-static inline u16 fpga_read_reg(unsigned int reg)
-{
- return ioread16(sdk7786_fpga_base + reg);
-}
-
-static inline void fpga_write_reg(u16 val, unsigned int reg)
-{
- iowrite16(val, sdk7786_fpga_base + reg);
-}
-
-#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/irq.h b/arch/sh/include/mach-sdk7786/mach/irq.h
deleted file mode 100644
index 3343380907b2db..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_IRQ_H
-#define __MACH_SDK7786_IRQ_H
-
-/* arch/sh/boards/mach-sdk7786/irq.c */
-extern void sdk7786_init_irq(void);
-
-#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/arch/sh/include/mach-se/mach/mrshpc.h b/arch/sh/include/mach-se/mach/mrshpc.h
deleted file mode 100644
index 4e260f399b79c3..00000000000000
--- a/arch/sh/include/mach-se/mach/mrshpc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SE_MRSHPC_H
-#define __MACH_SE_MRSHPC_H
-
-#include <linux/io.h>
-
-static inline void __init mrshpc_setup_windows(void)
-{
- if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0)
- return; /* Not detected */
-
- if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) {
- __raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
- } else {
- __raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
- }
-
- /*
- * PC-Card window open
- * flag == COMMON/ATTRIBUTE/IO
- */
- /* common window open */
- __raw_writew(0x8a84, MRSHPC_MW0CR1);
- if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* common mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0b00, MRSHPC_MW0CR2);
- else
- /* common mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0300, MRSHPC_MW0CR2);
-
- /* attribute window open */
- __raw_writew(0x8a85, MRSHPC_MW1CR1);
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* attribute mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0a00, MRSHPC_MW1CR2);
- else
- /* attribute mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0200, MRSHPC_MW1CR2);
-
- /* I/O window open */
- __raw_writew(0x8a86, MRSHPC_IOWCR1);
- __raw_writew(0x0008, MRSHPC_CDCR); /* I/O card mode */
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- __raw_writew(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
- else
- __raw_writew(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
-
- __raw_writew(0x2000, MRSHPC_ICR);
- __raw_writeb(0x00, PA_MRSHPC_MW2 + 0x206);
- __raw_writeb(0x42, PA_MRSHPC_MW2 + 0x200);
-}
-
-#endif /* __MACH_SE_MRSHPC_H */
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
deleted file mode 100644
index aa83fe1ff0b124..00000000000000
--- a/arch/sh/include/mach-se/mach/se.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE_H
-#define __ASM_SH_HITACHI_SE_H
-
-/*
- * linux/include/asm-sh/hitachi_se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_83902 0xb0000000 /* DP83902A */
-#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */
-#define PA_83902_RST 0xb0080000 /* DP83902A reset port */
-
-#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */
-#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */
-#define PA_LED 0xb0c00000 /* LED */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define PA_BCR 0xb0e00000
-#else
-#define PA_BCR 0xb1400000 /* FPGA */
-#endif
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define INTC_IRR0 0xa4000004UL
-#define INTC_IRR1 0xa4000006UL
-#define INTC_IRR2 0xa4000008UL
-
-#define INTC_ICR0 0xfffffee0UL
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR2 0xa4000012UL
-#define INTC_INTER 0xa4000014UL
-
-#define INTC_IPRC 0xa4000016UL
-#define INTC_IPRD 0xa4000018UL
-#define INTC_IPRE 0xa400001aUL
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC evt2irq(0x380)
-#define IRQ_CFCARD evt2irq(0x3c0)
-#else
-#define IRQ_STNIC evt2irq(0x340)
-#define IRQ_CFCARD evt2irq(0x2e0)
-#endif
-
-/* SH Ether support (SH7710/SH7712) */
-/* Base address */
-#define SH_ETH0_BASE 0xA7000000
-#define SH_ETH1_BASE 0xA7000400
-#define SH_TSU_BASE 0xA7000800
-/* PHY ID */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-# define PHY_ID 0x00
-#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
-# define PHY_ID 0x01
-#endif
-/* Ether IRQ */
-#define SH_ETH0_IRQ evt2irq(0xc00)
-#define SH_ETH1_IRQ evt2irq(0xc20)
-#define SH_TSU_IRQ evt2irq(0xc40)
-
-void init_se_IRQ(void);
-
-#define __IO_PREFIX se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
deleted file mode 100644
index cf190279bb1d7e..00000000000000
--- a/arch/sh/include/mach-se/mach/se7206.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7206_H
-#define __ASM_SH_SE7206_H
-
-#define PA_SMSC 0x30000000
-#define PA_MRSHPC 0x34000000
-#define PA_LED 0x31400000
-
-void init_se7206_IRQ(void);
-
-#define __IO_PREFIX se7206
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7206_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
deleted file mode 100644
index 107fb5f3ef8056..00000000000000
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-/* Area 0 */
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM 0x00400000 /* Flash ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
-#define PA_SRAM 0x00800000 /* SRAM */
-#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-/* Area 2 */
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-/* Area 3 */
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-/* Area 4 */
-#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED 0xb0C00000 /* LED */
-#define LED_SHIFT 0
-#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-/* Area 5 */
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-/* Area 6 */
-#define PA_LCD1 0xb8000000
-#define PA_LCD2 0xb8800000
-
-#define PORT_PACR 0xA4050100
-#define PORT_PBCR 0xA4050102
-#define PORT_PCCR 0xA4050104
-#define PORT_PDCR 0xA4050106
-#define PORT_PECR 0xA4050108
-#define PORT_PFCR 0xA405010A
-#define PORT_PGCR 0xA405010C
-#define PORT_PHCR 0xA405010E
-#define PORT_PJCR 0xA4050110
-#define PORT_PKCR 0xA4050112
-#define PORT_PLCR 0xA4050114
-#define PORT_PMCR 0xA4050116
-#define PORT_PNCR 0xA4050118
-#define PORT_PQCR 0xA405011A
-#define PORT_PRCR 0xA405011C
-#define PORT_PSCR 0xA405011E
-#define PORT_PTCR 0xA4050140
-#define PORT_PUCR 0xA4050142
-#define PORT_PVCR 0xA4050144
-#define PORT_PWCR 0xA4050146
-#define PORT_PYCR 0xA4050148
-#define PORT_PZCR 0xA405014A
-
-#define PORT_PSELA 0xA405014C
-#define PORT_PSELB 0xA405014E
-#define PORT_PSELC 0xA4050150
-#define PORT_PSELD 0xA4050152
-#define PORT_PSELE 0xA4050154
-
-#define PORT_HIZCRA 0xA4050156
-#define PORT_HIZCRB 0xA4050158
-#define PORT_HIZCRC 0xA405015C
-
-#define PORT_DRVCR 0xA4050180
-
-#define PORT_PADR 0xA4050120
-#define PORT_PBDR 0xA4050122
-#define PORT_PCDR 0xA4050124
-#define PORT_PDDR 0xA4050126
-#define PORT_PEDR 0xA4050128
-#define PORT_PFDR 0xA405012A
-#define PORT_PGDR 0xA405012C
-#define PORT_PHDR 0xA405012E
-#define PORT_PJDR 0xA4050130
-#define PORT_PKDR 0xA4050132
-#define PORT_PLDR 0xA4050134
-#define PORT_PMDR 0xA4050136
-#define PORT_PNDR 0xA4050138
-#define PORT_PQDR 0xA405013A
-#define PORT_PRDR 0xA405013C
-#define PORT_PTDR 0xA4050160
-#define PORT_PUDR 0xA4050162
-#define PORT_PVDR 0xA4050164
-#define PORT_PWDR 0xA4050166
-#define PORT_PYDR 0xA4050168
-
-#define FPGA_IN 0xb1400000
-#define FPGA_OUT 0xb1400002
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ4_IRQ evt2irq(0x680)
-#define IRQ5_IRQ evt2irq(0x6a0)
-
-#define SE7343_FPGA_IRQ_MRSHPC0 0
-#define SE7343_FPGA_IRQ_MRSHPC1 1
-#define SE7343_FPGA_IRQ_MRSHPC2 2
-#define SE7343_FPGA_IRQ_MRSHPC3 3
-#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */
-#define SE7343_FPGA_IRQ_USB 8
-#define SE7343_FPGA_IRQ_UARTA 10
-#define SE7343_FPGA_IRQ_UARTB 11
-
-#define SE7343_FPGA_IRQ_NR 12
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7343/irq.c */
-extern struct irq_domain *se7343_irq_domain;
-
-void init_7343se_IRQ(void);
-
-#endif /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
deleted file mode 100644
index 82226d40faf528..00000000000000
--- a/arch/sh/include/mach-se/mach/se7721.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-
-#ifndef __ASM_SH_SE7721_H
-#define __ASM_SH_SE7721_H
-
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 2 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB8000000
-
-#define PA_PCIC PA_PERIPHERAL
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0)
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000)
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000)
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED 0xB6800000 /* 8bit LED */
-#define PA_FPGA 0xB7000000 /* FPGA base address */
-
-#define MRSHPC_IRQ0 evt2irq(0x340)
-
-#define FPGA_ILSR1 (PA_FPGA + 0x02)
-#define FPGA_ILSR2 (PA_FPGA + 0x03)
-#define FPGA_ILSR3 (PA_FPGA + 0x04)
-#define FPGA_ILSR4 (PA_FPGA + 0x05)
-#define FPGA_ILSR5 (PA_FPGA + 0x06)
-#define FPGA_ILSR6 (PA_FPGA + 0x07)
-#define FPGA_ILSR7 (PA_FPGA + 0x08)
-#define FPGA_ILSR8 (PA_FPGA + 0x09)
-
-void init_se7721_IRQ(void);
-
-#define __IO_PREFIX se7721
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7721_H */
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
deleted file mode 100644
index efb761f9f6e0e8..00000000000000
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7722_H
-#define __ASM_SH_SE7722_H
-
-/*
- * linux/include/asm-sh/se7722.h
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB0000000
-
-#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
-#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
-
-#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
-/* GPIO */
-#define FPGA_IN 0xb1840000UL
-#define FPGA_OUT 0xb1840004UL
-
-#define PORT_PECR 0xA4050108UL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PSELD 0xA4050154UL
-#define PORT_PSELB 0xA4050150UL
-
-#define PORT_PSELC 0xA4050152UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PRCR 0xA405011CUL
-#define PORT_PXCR 0xA4050148UL
-#define PORT_PSELA 0xA405014EUL
-#define PORT_PYCR 0xA405014AUL
-#define PORT_PZCR 0xA405014CUL
-#define PORT_HIZCRA 0xA4050158UL
-#define PORT_HIZCRC 0xA405015CUL
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-
-#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */
-#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */
-#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
-#define SE7722_FPGA_IRQ_NR 6
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7722/irq.c */
-extern struct irq_domain *se7722_irq_domain;
-
-void init_se7722_IRQ(void);
-
-#define __IO_PREFIX se7722
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7722_H */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
deleted file mode 100644
index 1fe28820dfa953..00000000000000
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7724_H
-#define __ASM_SH_SE7724_H
-
-/*
- * linux/include/asm-sh/se7724.h
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Hitachi UL SolutionEngine 7724 Support.
- *
- * Based on se7722.h
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
-#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
-
-#define PA_LED (0xba203000) /* 8bit LED */
-#define IRQ_MODE (0xba200010)
-#define IRQ0_SR (0xba200014)
-#define IRQ1_SR (0xba200018)
-#define IRQ2_SR (0xba20001c)
-#define IRQ0_MR (0xba200020)
-#define IRQ1_MR (0xba200024)
-#define IRQ2_MR (0xba200028)
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ2_IRQ evt2irq(0x640)
-
-/* Bits in IRQ012 registers */
-#define SE7724_FPGA_IRQ_BASE 220
-
-/* IRQ0 */
-#define IRQ0_BASE SE7724_FPGA_IRQ_BASE
-#define IRQ0_KEY (IRQ0_BASE + 12)
-#define IRQ0_RMII (IRQ0_BASE + 13)
-#define IRQ0_SMC (IRQ0_BASE + 14)
-#define IRQ0_MASK 0x7fff
-#define IRQ0_END IRQ0_SMC
-/* IRQ1 */
-#define IRQ1_BASE (IRQ0_END + 1)
-#define IRQ1_TS (IRQ1_BASE + 0)
-#define IRQ1_MASK 0x0001
-#define IRQ1_END IRQ1_TS
-/* IRQ2 */
-#define IRQ2_BASE (IRQ1_END + 1)
-#define IRQ2_USB0 (IRQ1_BASE + 0)
-#define IRQ2_USB1 (IRQ1_BASE + 1)
-#define IRQ2_MASK 0x0003
-#define IRQ2_END IRQ2_USB1
-
-#define SE7724_FPGA_IRQ_NR (IRQ2_END - IRQ0_BASE)
-
-/* arch/sh/boards/se/7724/irq.c */
-void init_se7724_IRQ(void);
-
-#define __IO_PREFIX se7724
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7724_H */
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
deleted file mode 100644
index ee5b5e6e597970..00000000000000
--- a/arch/sh/include/mach-se/mach/se7751.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_7751SE_H
-#define __ASM_SH_HITACHI_7751SE_H
-
-/*
- * linux/include/asm-sh/hitachi_7751se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
-
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 evt2irq(0x3a0)
-
-void init_7751se_IRQ(void);
-
-#define __IO_PREFIX sh7751se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
deleted file mode 100644
index 24f0ac82f8b330..00000000000000
--- a/arch/sh/include/mach-se/mach/se7780.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7780_H
-#define __ASM_SH_SE7780_H
-
-/*
- * linux/include/asm-sh/se7780.h
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */
-#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */
-
-#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */
-
-#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */
-#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */
-#define DISP_CHAR_RAM (7 << 3)
-#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0)
-#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1)
-#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2)
-#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3)
-#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4)
-#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5)
-#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6)
-#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7)
-
-#define DISP_UDC_RAM (5 << 3)
-#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */
-
-/* FPGA register address and bit */
-#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */
-#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */
-#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */
-#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */
-#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */
-#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */
-#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */
-#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */
-#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */
-#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */
-#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */
-#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */
-#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */
-#define PA_LED FPGA_DBG_LED
-#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */
-#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */
-#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */
-
-/* FPGA INTSEL position */
-/* INTSEL1 */
-#define IRQPOS_SMC91CX (0 * 4)
-#define IRQPOS_SM501 (1 * 4)
-/* INTSEL2 */
-#define IRQPOS_EXTINT1 (0 * 4)
-#define IRQPOS_EXTINT2 (1 * 4)
-#define IRQPOS_EXTINT3 (2 * 4)
-#define IRQPOS_EXTINT4 (3 * 4)
-/* INTSEL3 */
-#define IRQPOS_PCCPW (0 * 4)
-
-/* IDE interrupt */
-#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */
-
-/* SMC interrupt */
-#define SMC_IRQ evt2irq(0x300)
-
-/* SM501 interrupt */
-#define SM501_IRQ evt2irq(0x200)
-
-/* interrupt pin */
-#define IRQPIN_EXTINT1 0 /* IRQ0 pin */
-#define IRQPIN_EXTINT2 1 /* IRQ1 pin */
-#define IRQPIN_EXTINT3 2 /* IRQ2 pin */
-#define IRQPIN_SMC91CX 3 /* IRQ3 pin */
-#define IRQPIN_EXTINT4 4 /* IRQ4 pin */
-#define IRQPIN_PCC0 5 /* IRQ5 pin */
-#define IRQPIN_PCC2 6 /* IRQ6 pin */
-#define IRQPIN_SM501 7 /* IRQ7 pin */
-#define IRQPIN_PCCPW 7 /* IRQ7 pin */
-
-/* arch/sh/boards/se/7780/irq.c */
-void init_se7780_IRQ(void);
-
-#define __IO_PREFIX se7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7780_H */
diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h
deleted file mode 100644
index 5eacdabd71b6cb..00000000000000
--- a/arch/sh/include/mach-sh03/mach/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/sh03/io.h
- *
- * Copyright 2004 Interface Co.,Ltd. Saito.K
- *
- * IO functions for an Interface CTP/PCI-SH03
- */
-
-#ifndef _ASM_SH_IO_SH03_H
-#define _ASM_SH_IO_SH03_H
-
-#include <linux/time.h>
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-
-void heartbeat_sh03(void);
-
-#endif /* _ASM_SH_IO_SH03_H */
diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
deleted file mode 100644
index 4ced684b16a4d4..00000000000000
--- a/arch/sh/include/mach-sh03/mach/sh03.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH03_H
-#define __ASM_SH_SH03_H
-
-/*
- * linux/include/asm-sh/sh03/sh03.h
- *
- * Copyright (C) 2004 Interface Co., Ltd. Saito.K
- *
- * Interface CTP/PCI-SH03 support
- */
-
-#define PA_PCI_IO (0xbe240000) /* PCI I/O space */
-#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */
-
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#endif /* __ASM_SH_SH03_H */
diff --git a/arch/sh/include/mach-x3proto/mach/hardware.h b/arch/sh/include/mach-x3proto/mach/hardware.h
deleted file mode 100644
index 57ea4a5cca359d..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/hardware.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_X3PROTO_HARDWARE_H
-#define __MACH_X3PROTO_HARDWARE_H
-
-struct gpio_chip;
-
-/* arch/sh/boards/mach-x3proto/gpio.c */
-int x3proto_gpio_setup(void);
-extern struct gpio_chip x3proto_gpio_chip;
-
-#define NR_BASEBOARD_GPIOS 16
-
-#endif /* __MACH_X3PROTO_HARDWARE_H */
diff --git a/arch/sh/include/mach-x3proto/mach/ilsel.h b/arch/sh/include/mach-x3proto/mach/ilsel.h
deleted file mode 100644
index 47aeb4b55ea17b..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/ilsel.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ILSEL_H
-#define __ASM_SH_ILSEL_H
-
-typedef enum {
- ILSEL_NONE,
- ILSEL_LAN,
- ILSEL_USBH_I,
- ILSEL_USBH_S,
- ILSEL_USBH_V,
- ILSEL_RTC,
- ILSEL_USBP_I,
- ILSEL_USBP_S,
- ILSEL_USBP_V,
- ILSEL_KEY,
-
- /*
- * ILSEL Aliases - corner cases for interleaved level tables.
- *
- * Someone thought this was a good idea and less hassle than
- * demuxing a shared vector, really.
- */
-
- /* ILSEL0 and 2 */
- ILSEL_FPGA0,
- ILSEL_FPGA1,
- ILSEL_EX1,
- ILSEL_EX2,
- ILSEL_EX3,
- ILSEL_EX4,
-
- /* ILSEL1 and 3 */
- ILSEL_FPGA2 = ILSEL_FPGA0,
- ILSEL_FPGA3 = ILSEL_FPGA1,
- ILSEL_EX5 = ILSEL_EX1,
- ILSEL_EX6 = ILSEL_EX2,
- ILSEL_EX7 = ILSEL_EX3,
- ILSEL_EX8 = ILSEL_EX4,
-} ilsel_source_t;
-
-/* arch/sh/boards/renesas/x3proto/ilsel.c */
-int ilsel_enable(ilsel_source_t set);
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
-void ilsel_disable(unsigned int irq);
-
-#endif /* __ASM_SH_ILSEL_H */
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
deleted file mode 100644
index b8812c74c1dee1..00000000000000
--- a/arch/sh/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-generated-y += unistd_32.h
-generic-y += ucontext.h
diff --git a/arch/sh/include/uapi/asm/auxvec.h b/arch/sh/include/uapi/asm/auxvec.h
deleted file mode 100644
index 8eb47ede7193c1..00000000000000
--- a/arch/sh/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW 18 /* Used FPU control word. */
-
-#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR 33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the
- * value is -1, then the cache doesn't exist. Otherwise:
- *
- * bit 0-3: Cache set-associativity; 0 means fully associative.
- * bit 4-7: Log2 of cacheline size.
- * bit 8-31: Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE 34
-#define AT_L1D_CACHESHAPE 35
-#define AT_L2_CACHESHAPE 36
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/arch/sh/include/uapi/asm/byteorder.h b/arch/sh/include/uapi/asm/byteorder.h
deleted file mode 100644
index e27d6da3212ca1..00000000000000
--- a/arch/sh/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_BYTEORDER_H
-#define __ASM_SH_BYTEORDER_H
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
-
-#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/arch/sh/include/uapi/asm/cachectl.h b/arch/sh/include/uapi/asm/cachectl.h
deleted file mode 100644
index 79c5663251a528..00000000000000
--- a/arch/sh/include/uapi/asm/cachectl.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _SH_CACHECTL_H
-#define _SH_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */
-#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */
-#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */
-
-#define CACHEFLUSH_I 0x4
-
-/*
- * Options for cacheflush system call
- */
-#define ICACHE CACHEFLUSH_I /* flush instruction cache */
-#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */
-#define BCACHE (ICACHE|DCACHE) /* flush both caches */
-
-#endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/include/uapi/asm/cpu-features.h b/arch/sh/include/uapi/asm/cpu-features.h
deleted file mode 100644
index 6de5f65194e634..00000000000000
--- a/arch/sh/include/uapi/asm/cpu-features.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_CPU_FEATURES_H
-#define __ASM_SH_CPU_FEATURES_H
-
-/*
- * Processor flags
- *
- * Note: When adding a new flag, keep cpu_flags[] in
- * arch/sh/kernel/setup.c in sync so symbolic name
- * mapping of the processor flags has a chance of being
- * reasonably accurate.
- *
- * These flags are also available through the ELF
- * auxiliary vector as AT_HWCAP.
- */
-#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */
-#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */
-#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
-#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
-#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
-#define CPU_HAS_PTEA 0x0020 /* PTEA register */
-#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */
-#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */
-#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */
-#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */
-#define CPU_HAS_CAS_L 0x0400 /* cas.l atomic compare-and-swap */
-
-#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h
deleted file mode 100644
index 043dd4b9202630..00000000000000
--- a/arch/sh/include/uapi/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * There isn't anything here anymore, but the file must not be empty or patch
- * will delete it.
- */
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
deleted file mode 100644
index 11866d4f60e167..00000000000000
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_IOCTLS_H
-#define __ASM_SH_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX _IO('f', 1)
-#define FIONCLEX _IO('f', 2)
-#define FIOASYNC _IOW('f', 125, int)
-#define FIONBIO _IOW('f', 126, int)
-#define FIONREAD _IOR('f', 127, int)
-#define TIOCINQ FIONREAD
-#define FIOQSIZE _IOR('f', 128, loff_t)
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-
-#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
-#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
-#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
-#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
-
-#define TCSBRK _IO('t', 29)
-#define TCXONC _IO('t', 30)
-#define TCFLSH _IO('t', 31)
-
-#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
-#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
-#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
-#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
-#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
-
-#define TIOCSPGRP _IOW('t', 118, int)
-#define TIOCGPGRP _IOR('t', 119, int)
-
-#define TIOCEXCL _IO('T', 12) /* 0x540C */
-#define TIOCNXCL _IO('T', 13) /* 0x540D */
-#define TIOCSCTTY _IO('T', 14) /* 0x540E */
-
-#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */
-#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */
-#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */
-#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */
-#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */
-# define TIOCM_LE 0x001
-# define TIOCM_DTR 0x002
-# define TIOCM_RTS 0x004
-# define TIOCM_ST 0x008
-# define TIOCM_SR 0x010
-# define TIOCM_CTS 0x020
-# define TIOCM_CAR 0x040
-# define TIOCM_RNG 0x080
-# define TIOCM_DSR 0x100
-# define TIOCM_CD TIOCM_CAR
-# define TIOCM_RI TIOCM_RNG
-
-#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */
-#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */
-#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */
-#define TIOCCONS _IO('T', 29) /* 0x541D */
-#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */
-#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */
-#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */
-# define TIOCPKT_DATA 0
-# define TIOCPKT_FLUSHREAD 1
-# define TIOCPKT_FLUSHWRITE 2
-# define TIOCPKT_STOP 4
-# define TIOCPKT_START 8
-# define TIOCPKT_NOSTOP 16
-# define TIOCPKT_DOSTOP 32
-# define TIOCPKT_IOCTL 64
-
-
-#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
-#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */
-#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */
-#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */
-#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */
-#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 42, struct termios2)
-#define TCSETS2 _IOW('T', 43, struct termios2)
-#define TCSETSW2 _IOW('T', 44, struct termios2)
-#define TCSETSF2 _IOW('T', 45, struct termios2)
-#define TIOCGRS485 _IOR('T', 46, struct serial_rs485)
-#define TIOCSRS485 _IOWR('T', 47, struct serial_rs485)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-#define TIOCVHANGUP _IO('T', 0x37)
-#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
-#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
-#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
-#define TIOCGISO7816 _IOR('T', 0x42, struct serial_iso7816)
-#define TIOCSISO7816 _IOWR('T', 0x43, struct serial_iso7816)
-
-#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
-#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
-#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
-#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
- /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
-#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
-
-#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#endif /* __ASM_SH_IOCTLS_H */
diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h
deleted file mode 100644
index adc998a64c769f..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/uapi/asm/posix_types_32.h b/arch/sh/include/uapi/asm/posix_types_32.h
deleted file mode 100644
index ea0f51d1ac554b..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types_32.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_POSIX_TYPES_32_H
-#define __ASM_SH_POSIX_TYPES_32_H
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-typedef unsigned short __kernel_uid_t;
-#define __kernel_uid_t __kernel_uid_t
-typedef unsigned short __kernel_gid_t;
-#define __kernel_gid_t __kernel_gid_t
-
-typedef unsigned short __kernel_old_uid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_gid_t __kernel_old_gid_t
-typedef unsigned short __kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* __ASM_SH_POSIX_TYPES_32_H */
diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h
deleted file mode 100644
index 5c88e46b77731a..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef _UAPI__ASM_SH_PTRACE_H
-#define _UAPI__ASM_SH_PTRACE_H
-
-
-#define PTRACE_GETREGS 12 /* General registers */
-#define PTRACE_SETREGS 13
-
-#define PTRACE_GETFPREGS 14 /* FPU registers */
-#define PTRACE_SETFPREGS 15
-
-#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
-
-#define PTRACE_GETDSPREGS 55 /* DSP registers */
-#define PTRACE_SETDSPREGS 56
-
-#define PT_TEXT_END_ADDR 240
-#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
-#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
-#define PT_TEXT_LEN 252
-
-#include <asm/ptrace_32.h>
-
-#endif /* _UAPI__ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/uapi/asm/ptrace_32.h b/arch/sh/include/uapi/asm/ptrace_32.h
deleted file mode 100644
index dc8a26015018af..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace_32.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_SH_PTRACE_32_H
-#define _UAPI__ASM_SH_PTRACE_32_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- * 0 - 15 are integer registers
- * 17 - 22 are control/special registers
- * 24 - 39 fp registers
- * 40 - 47 xd registers
- * 48 - fpscr register
- * -----------------------------
- *
- * We follows above, except:
- * 16 --- program counter (PC)
- * 22 --- syscall #
- * 23 --- floating point communication register
- */
-#define REG_REG0 0
-#define REG_REG15 15
-
-#define REG_PC 16
-
-#define REG_PR 17
-#define REG_SR 18
-#define REG_GBR 19
-#define REG_MACH 20
-#define REG_MACL 21
-
-#define REG_SYSCALL 22
-
-#define REG_FPREG0 23
-#define REG_FPREG15 38
-#define REG_XFREG0 39
-#define REG_XFREG15 54
-
-#define REG_FPSCR 55
-#define REG_FPUL 56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
- unsigned long regs[16];
- unsigned long pc;
- unsigned long pr;
- unsigned long sr;
- unsigned long gbr;
- unsigned long mach;
- unsigned long macl;
- long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
- unsigned long a1;
- unsigned long a0g;
- unsigned long a1g;
- unsigned long m0;
- unsigned long m1;
- unsigned long a0;
- unsigned long x0;
- unsigned long x1;
- unsigned long y0;
- unsigned long y1;
- unsigned long dsr;
- unsigned long rs;
- unsigned long re;
- unsigned long mod;
-};
-
-
-#endif /* _UAPI__ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h
deleted file mode 100644
index a9cc8bad0f36df..00000000000000
--- a/arch/sh/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGCONTEXT_H
-#define __ASM_SH_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/uapi/asm/signal.h b/arch/sh/include/uapi/asm/signal.h
deleted file mode 100644
index 97299daddef5dc..00000000000000
--- a/arch/sh/include/uapi/asm/signal.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGNAL_H
-#define __ASM_SH_SIGNAL_H
-
-#define SA_RESTORER 0x04000000
-
-#include <asm-generic/signal.h>
-
-#ifndef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-#endif
-
-#endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h
deleted file mode 100644
index ef01ced9e16963..00000000000000
--- a/arch/sh/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SOCKIOS_H
-#define __ASM_SH_SOCKIOS_H
-
-#include <linux/time_types.h>
-
-/* Socket-level I/O control calls. */
-#define FIOGETOWN _IOR('f', 123, int)
-#define FIOSETOWN _IOW('f', 124, int)
-
-#define SIOCATMARK _IOR('s', 7, int)
-#define SIOCSPGRP _IOW('s', 8, pid_t)
-#define SIOCGPGRP _IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP_OLD _IOR('s', 100, struct __kernel_old_timeval) /* Get stamp (timeval) */
-#define SIOCGSTAMPNS_OLD _IOR('s', 101, struct __kernel_old_timespec) /* Get stamp (timespec) */
-
-#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h
deleted file mode 100644
index b0ca755ea08d99..00000000000000
--- a/arch/sh/include/uapi/asm/stat.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_STAT_H
-#define __ASM_SH_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned long st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[4];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#define STAT_HAVE_NSEC 1
-
-#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h
deleted file mode 100644
index c727d381a30aff..00000000000000
--- a/arch/sh/include/uapi/asm/swab.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SWAB_H
-#define __ASM_SH_SWAB_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000, 2001 Paolo Alberelli
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm-generic/swab.h>
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
- __asm__(
- "swap.b %1, %0\n\t"
- "swap.w %0, %0\n\t"
- "swap.b %0, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab32 __arch_swab32
-
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
-{
- __asm__(
- "swap.b %1, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab16 __arch_swab16
-
-static inline __u64 __arch_swab64(__u64 val)
-{
- union {
- struct { __u32 a,b; } s;
- __u64 u;
- } v, w;
- v.u = val;
- w.s.b = __arch_swab32(v.s.a);
- w.s.a = __arch_swab32(v.s.b);
- return w.u;
-}
-#define __arch_swab64 __arch_swab64
-
-#endif /* __ASM_SH_SWAB_H */
diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h
deleted file mode 100644
index 0f7c7772a2fbfc..00000000000000
--- a/arch/sh/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/unistd_32.h>
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
deleted file mode 100644
index bbb90f92d05182..00000000000000
--- a/arch/sh/kernel/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.lds
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
deleted file mode 100644
index 69cd9ac4b2ab8a..00000000000000
--- a/arch/sh/kernel/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH kernel.
-#
-
-extra-y := vmlinux.lds
-
-ifdef CONFIG_FUNCTION_TRACER
-# Do not profile debug and lowlevel utilities
-CFLAGS_REMOVE_ftrace.o = -pg
-endif
-
-CFLAGS_REMOVE_return_address.o = -pg
-
-obj-y := head_32.o debugtraps.o dumpstack.o \
- idle.o io.o irq.o irq_32.o kdebugfs.o \
- machvec.o nmi_debug.o process.o \
- process_32.o ptrace.o ptrace_32.o \
- reboot.o return_address.o \
- setup.o signal_32.o sys_sh.o \
- syscalls_32.o time.o topology.o traps.o \
- traps_32.o unwinder.o
-
-ifndef CONFIG_GENERIC_IOMAP
-obj-y += iomap.o
-obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
-endif
-
-obj-y += sys_sh32.o
-obj-y += cpu/
-obj-$(CONFIG_VSYSCALL) += vsyscall/
-obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
-obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
-obj-$(CONFIG_DUMP_CODE) += disassemble.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
-obj-$(CONFIG_DMA_NONCOHERENT) += dma-coherent.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
deleted file mode 100644
index a0322e8328456e..00000000000000
--- a/arch/sh/kernel/asm-offsets.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-
-#include <asm/thread_info.h>
-#include <asm/suspend.h>
-
-int main(void)
-{
- /* offsets into the thread_info struct */
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SIZE, sizeof(struct thread_info));
-
-#ifdef CONFIG_HIBERNATION
- DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
- DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
- DEFINE(PBE_NEXT, offsetof(struct pbe, next));
- DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
-#endif
-
- DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
- DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
- DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
- DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
- DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
- DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
- DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
- DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
- DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
- DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
- DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
- DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
- DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
- DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
- DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
- DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
- DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
- DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
- DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
- DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
- DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
- DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
- return 0;
-}
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
deleted file mode 100644
index 46118236bf0499..00000000000000
--- a/arch/sh/kernel/cpu/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific backends.
-#
-
-obj-$(CONFIG_CPU_SH2) = sh2/
-obj-$(CONFIG_CPU_SH2A) = sh2a/
-obj-$(CONFIG_CPU_SH3) = sh3/
-obj-$(CONFIG_CPU_SH4) = sh4/
-
-# Special cases for family ancestry.
-
-obj-$(CONFIG_CPU_SH4A) += sh4a/
-obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
-
-# Common interfaces.
-
-obj-$(CONFIG_SH_ADC) += adc.o
-obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c
deleted file mode 100644
index 509136715ed53c..00000000000000
--- a/arch/sh/kernel/cpu/adc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/adc.c -- SH3 on-chip ADC support
- *
- * Copyright (C) 2004 Andriy Skulysh <askulysh@image.kiev.ua>
- */
-
-#include <linux/module.h>
-#include <asm/adc.h>
-#include <asm/io.h>
-
-
-int adc_single(unsigned int channel)
-{
- int off;
- unsigned char csr;
-
- if (channel >= 8) return -1;
-
- off = (channel & 0x03) << 2;
-
- csr = __raw_readb(ADCSR);
- csr = channel | ADCSR_ADST | ADCSR_CKS;
- __raw_writeb(csr, ADCSR);
-
- do {
- csr = __raw_readb(ADCSR);
- } while ((csr & ADCSR_ADF) == 0);
-
- csr &= ~(ADCSR_ADF | ADCSR_ADST);
- __raw_writeb(csr, ADCSR);
-
- return (((__raw_readb(ADDRAH + off) << 8) |
- __raw_readb(ADDRAL + off)) >> 6);
-}
-
-EXPORT_SYMBOL(adc_single);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
deleted file mode 100644
index 5b75a384cbf349..00000000000000
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-static struct clk master_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .rate = CONFIG_SH_PCLK_FREQ,
-};
-
-static struct clk peripheral_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk bus_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk cpu_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/*
- * The ordering of these clocks matters, do not change it.
- */
-static struct clk *onchip_clocks[] = {
- &master_clk,
- &peripheral_clk,
- &bus_clk,
- &cpu_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("master_clk", &master_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral_clk),
- CLKDEV_CON_ID("bus_clk", &bus_clk),
- CLKDEV_CON_ID("cpu_clk", &cpu_clk),
-};
-
-int __init __deprecated cpg_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
- struct clk *clk = onchip_clocks[i];
- arch_init_clk_ops(&clk->ops, i);
- if (clk->ops)
- ret |= clk_register(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- clk_add_alias("fck", "sh-tmu-sh3.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.1", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL);
-
- return ret;
-}
-
-/*
- * Placeholder for compatibility, until the lazy CPUs do this
- * on their own.
- */
-int __init __weak arch_clk_init(void)
-{
- return cpg_clk_init();
-}
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
deleted file mode 100644
index 6fb34410d630a5..00000000000000
--- a/arch/sh/kernel/cpu/clock.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/clock.c - SuperH clock framework
- *
- * Copyright (C) 2005 - 2009 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-
-int __init clk_init(void)
-{
- int ret;
-
-#ifndef CONFIG_COMMON_CLK
- ret = arch_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: CPU clock registration failed.\n", __func__);
- return ret;
- }
-#endif
-
- if (sh_mv.mv_clk_init) {
- ret = sh_mv.mv_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: machvec clock initialization failed.\n",
- __func__);
- return ret;
- }
- }
-
-#ifndef CONFIG_COMMON_CLK
- /* Kick the child clocks.. */
- recalculate_root_clocks();
-
- /* Enable the necessary init clocks */
- clk_enable_init_clocks();
-#endif
-
- return ret;
-}
-
-
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
deleted file mode 100644
index fd6db0ab19288f..00000000000000
--- a/arch/sh/kernel/cpu/fpu.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-int init_fpu(struct task_struct *tsk)
-{
- if (tsk_used_math(tsk)) {
- if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
- unlazy_fpu(tsk, task_pt_regs(tsk));
- return 0;
- }
-
- /*
- * Memory allocation at the first usage of the FPU and other state.
- */
- if (!tsk->thread.xstate) {
- tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!tsk->thread.xstate)
- return -ENOMEM;
- }
-
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- } else {
- struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- }
-
- set_stopped_child_used_math(tsk);
- return 0;
-}
-
-#ifdef CONFIG_SH_FPU
-void __fpu_state_restore(void)
-{
- struct task_struct *tsk = current;
-
- restore_fpu(tsk);
-
- task_thread_info(tsk)->status |= TS_USEDFPU;
- tsk->thread.fpu_counter++;
-}
-
-void fpu_state_restore(struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (unlikely(!user_mode(regs))) {
- printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
- BUG();
- return;
- }
-
- if (!tsk_used_math(tsk)) {
- int ret;
- /*
- * does a slab alloc which can sleep
- */
- local_irq_enable();
- ret = init_fpu(tsk);
- local_irq_disable();
- if (ret) {
- /*
- * ran out of memory!
- */
- force_sig(SIGKILL);
- return;
- }
- }
-
- grab_fpu(regs);
-
- __fpu_state_restore();
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
- TRAP_HANDLER_DECL;
-
- fpu_state_restore(regs);
-}
-#endif /* CONFIG_SH_FPU */
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
deleted file mode 100644
index 1d008745877ff8..00000000000000
--- a/arch/sh/kernel/cpu/init.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/init.c
- *
- * CPU init code
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/log2.h>
-#include <asm/mmu_context.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/cache.h>
-#include <asm/elf.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/sh_bios.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_SH_FPU
-#define cpu_has_fpu 1
-#else
-#define cpu_has_fpu 0
-#endif
-
-#ifdef CONFIG_SH_DSP
-#define cpu_has_dsp 1
-#else
-#define cpu_has_dsp 0
-#endif
-
-/*
- * Generic wrapper for command line arguments to disable on-chip
- * peripherals (nofpu, nodsp, and so forth).
- */
-#define onchip_setup(x) \
-static int x##_disabled = !cpu_has_##x; \
- \
-static int x##_setup(char *opts) \
-{ \
- x##_disabled = 1; \
- return 1; \
-} \
-__setup("no" __stringify(x), x##_setup);
-
-onchip_setup(fpu);
-onchip_setup(dsp);
-
-#ifdef CONFIG_SPECULATIVE_EXECUTION
-#define CPUOPM 0xff2f0000
-#define CPUOPM_RABD (1 << 5)
-
-static void speculative_execution_init(void)
-{
- /* Clear RABD */
- __raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
-
- /* Flush the update */
- (void)__raw_readl(CPUOPM);
- ctrl_barrier();
-}
-#else
-#define speculative_execution_init() do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH4A
-#define EXPMASK 0xff2f0004
-#define EXPMASK_RTEDS (1 << 0)
-#define EXPMASK_BRDSSLP (1 << 1)
-#define EXPMASK_MMCAW (1 << 4)
-
-static void expmask_init(void)
-{
- unsigned long expmask = __raw_readl(EXPMASK);
-
- /*
- * Future proofing.
- *
- * Disable support for slottable sleep instruction, non-nop
- * instructions in the rte delay slot, and associative writes to
- * the memory-mapped cache array.
- */
- expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
-
- __raw_writel(expmask, EXPMASK);
- ctrl_barrier();
-}
-#else
-#define expmask_init() do { } while (0)
-#endif
-
-/* 2nd-level cache init */
-void __attribute__ ((weak)) l2_cache_init(void)
-{
-}
-
-/*
- * Generic first-level cache init
- */
-#if !defined(CONFIG_CPU_J2)
-static void cache_init(void)
-{
- unsigned long ccr, flags;
-
- jump_to_uncached();
- ccr = __raw_readl(SH_CCR);
-
- /*
- * At this point we don't know whether the cache is enabled or not - a
- * bootloader may have enabled it. There are at least 2 things that
- * could be dirty in the cache at this point:
- * 1. kernel command line set up by boot loader
- * 2. spilled registers from the prolog of this function
- * => before re-initialising the cache, we must do a purge of the whole
- * cache out to memory for safety. As long as nothing is spilled
- * during the loop to lines that have already been done, this is safe.
- * - RPC
- */
- if (ccr & CCR_CACHE_ENABLE) {
- unsigned long ways, waysize, addrstart;
-
- waysize = current_cpu_data.dcache.sets;
-
-#ifdef CCR_CACHE_ORA
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to flush..
- */
- if (ccr & CCR_CACHE_ORA)
- waysize >>= 1;
-#endif
-
- waysize <<= current_cpu_data.dcache.entry_shift;
-
-#ifdef CCR_CACHE_EMODE
- /* If EMODE is not set, we only have 1 way to flush. */
- if (!(ccr & CCR_CACHE_EMODE))
- ways = 1;
- else
-#endif
- ways = current_cpu_data.dcache.ways;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz)
- __raw_writel(0, addr);
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
- }
-
- /*
- * Default CCR values .. enable the caches
- * and invalidate them immediately..
- */
- flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE;
-
-#ifdef CCR_CACHE_EMODE
- /* Force EMODE if possible */
- if (current_cpu_data.dcache.ways > 1)
- flags |= CCR_CACHE_EMODE;
- else
- flags &= ~CCR_CACHE_EMODE;
-#endif
-
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- /* Write-through */
- flags |= CCR_CACHE_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- /* Write-back */
- flags |= CCR_CACHE_CB;
-#else
- /* Off */
- flags &= ~CCR_CACHE_ENABLE;
-#endif
-
- l2_cache_init();
-
- __raw_writel(flags, SH_CCR);
- back_to_cached();
-}
-#else
-#define cache_init() do { } while (0)
-#endif
-
-#define CSHAPE(totalsize, linesize, assoc) \
- ((totalsize & ~0xff) | (linesize << 4) | assoc)
-
-#define CACHE_DESC_SHAPE(desc) \
- CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways)
-
-static void detect_cache_shape(void)
-{
- l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache);
-
- if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED)
- l1i_cache_shape = l1d_cache_shape;
- else
- l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache);
-
- if (current_cpu_data.flags & CPU_HAS_L2_CACHE)
- l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache);
- else
- l2_cache_shape = -1; /* No S-cache */
-}
-
-static void fpu_init(void)
-{
- /* Disable the FPU */
- if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
- printk("FPU Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_FPU;
- }
-
- disable_fpu();
- clear_used_math();
-}
-
-#ifdef CONFIG_SH_DSP
-static void release_dsp(void)
-{
- unsigned long sr;
-
- /* Clear SR.DSP bit */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "and\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- : "=&r" (sr)
- : "r" (~SR_DSP)
- );
-}
-
-static void dsp_init(void)
-{
- unsigned long sr;
-
- /*
- * Set the SR.DSP bit, wait for one instruction, and then read
- * back the SR value.
- */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "or\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- "nop\n\t"
- "stc\tsr, %0\n\t"
- : "=&r" (sr)
- : "r" (SR_DSP)
- );
-
- /* If the DSP bit is still set, this CPU has a DSP */
- if (sr & SR_DSP)
- current_cpu_data.flags |= CPU_HAS_DSP;
-
- /* Disable the DSP */
- if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
- printk("DSP Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_DSP;
- }
-
- /* Now that we've determined the DSP status, clear the DSP bit. */
- release_dsp();
-}
-#else
-static inline void dsp_init(void) { }
-#endif /* CONFIG_SH_DSP */
-
-/**
- * cpu_init
- *
- * This is our initial entry point for each CPU, and is invoked on the
- * boot CPU prior to calling start_kernel(). For SMP, a combination of
- * this and start_secondary() will bring up each processor to a ready
- * state prior to hand forking the idle loop.
- *
- * We do all of the basic processor init here, including setting up
- * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
- * subsequently platform_setup()) things like determining the CPU
- * subtype and initial configuration will all be done.
- *
- * Each processor family is still responsible for doing its own probing
- * and cache configuration in cpu_probe().
- */
-asmlinkage void cpu_init(void)
-{
- current_thread_info()->cpu = hard_smp_processor_id();
-
- /* First, probe the CPU */
- cpu_probe();
-
- if (current_cpu_data.type == CPU_SH_NONE)
- panic("Unknown CPU");
-
- /* First setup the rest of the I-cache info */
- current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
- current_cpu_data.icache.linesz;
-
- current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
- current_cpu_data.icache.linesz;
-
- /* And the D-cache too */
- current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
- current_cpu_data.dcache.linesz;
-
- current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
- current_cpu_data.dcache.linesz;
-
- /* Init the cache */
- cache_init();
-
- if (raw_smp_processor_id() == 0) {
-#ifdef CONFIG_MMU
- shm_align_mask = max_t(unsigned long,
- current_cpu_data.dcache.way_size - 1,
- PAGE_SIZE - 1);
-#else
- shm_align_mask = PAGE_SIZE - 1;
-#endif
-
- /* Boot CPU sets the cache shape */
- detect_cache_shape();
- }
-
- fpu_init();
- dsp_init();
-
- /*
- * Initialize the per-CPU ASID cache very early, since the
- * TLB flushing routines depend on this being setup.
- */
- current_cpu_data.asid_cache = NO_CONTEXT;
-
- current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32;
-
- speculative_execution_init();
- expmask_init();
-
- /* Do the rest of the boot processor setup */
- if (raw_smp_processor_id() == 0) {
- /* Save off the BIOS VBR, if there is one */
- sh_bios_vbr_init();
-
- /*
- * Setup VBR for boot CPU. Secondary CPUs do this through
- * start_secondary().
- */
- per_cpu_trap_init();
-
- /*
- * Boot processor to setup the FP and extended state
- * context info.
- */
- init_thread_xstate();
- }
-}
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
deleted file mode 100644
index e4578cde46ba26..00000000000000
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
-#
-obj-y += imask.o
-obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
deleted file mode 100644
index 572585c3f2fd8c..00000000000000
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/imask.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- *
- * Simple interrupt handling using IMASK of SR register.
- *
- */
-/* NOTE: Will not work on level 15 */
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <linux/bitmap.h>
-#include <asm/irq.h>
-
-/* Bitmap of IRQ masked */
-#define IMASK_PRIORITY 15
-
-static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
-static int interrupt_priority;
-
-static inline void set_interrupt_registers(int ip)
-{
- unsigned long __dummy;
-
- asm volatile(
-#ifdef CONFIG_CPU_HAS_SR_RB
- "ldc %2, r6_bank\n\t"
-#endif
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- "shlr2 %0\n\t"
- "cmp/eq #0x3c, %0\n\t"
- "bt/s 1f ! CLI-ed\n\t"
- " stc sr, %0\n\t"
- "and %1, %0\n\t"
- "or %2, %0\n\t"
- "ldc %0, sr\n"
- "1:"
- : "=&z" (__dummy)
- : "r" (~0xf0), "r" (ip << 4)
- : "t");
-}
-
-static void mask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- clear_bit(irq, imask_mask);
- if (interrupt_priority < IMASK_PRIORITY - irq)
- interrupt_priority = IMASK_PRIORITY - irq;
- set_interrupt_registers(interrupt_priority);
-}
-
-static void unmask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- set_bit(irq, imask_mask);
- interrupt_priority = IMASK_PRIORITY -
- find_first_zero_bit(imask_mask, IMASK_PRIORITY);
- set_interrupt_registers(interrupt_priority);
-}
-
-static struct irq_chip imask_irq_chip = {
- .name = "SR.IMASK",
- .irq_mask = mask_imask_irq,
- .irq_unmask = unmask_imask_irq,
- .irq_mask_ack = mask_imask_irq,
-};
-
-void make_imask_irq(unsigned int irq)
-{
- irq_set_chip_and_handler_name(irq, &imask_irq_chip, handle_level_irq,
- "level");
-}
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
deleted file mode 100644
index d41bce71f211fd..00000000000000
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Interrupt handling for IPR-based IRQ.
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2006 Paul Mundt
- *
- * Supported system:
- * On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729.
- * Hitachi SolutionEngine external I/O:
- * MS7709SE01, MS7709ASE01, and MS7750SE01
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-
-static inline struct ipr_desc *get_ipr_desc(struct irq_data *data)
-{
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- return container_of(chip, struct ipr_desc, chip);
-}
-
-static void disable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set the priority in IPR to 0 */
- __raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
- (void)__raw_readw(addr); /* Read back to flush write posting */
-}
-
-static void enable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set priority in IPR back to original value */
- __raw_writew(__raw_readw(addr) | (p->priority << p->shift), addr);
-}
-
-/*
- * The shift value is now the number of bits to shift, not the number of
- * bits/4. This is to make it easier to read the value directly from the
- * datasheets. The IPR address is calculated using the ipr_offset table.
- */
-void register_ipr_controller(struct ipr_desc *desc)
-{
- int i;
-
- desc->chip.irq_mask = disable_ipr_irq;
- desc->chip.irq_unmask = enable_ipr_irq;
-
- for (i = 0; i < desc->nr_irqs; i++) {
- struct ipr_data *p = desc->ipr_data + i;
- int res;
-
- BUG_ON(p->ipr_idx >= desc->nr_offsets);
- BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
-
- res = irq_alloc_desc_at(p->irq, numa_node_id());
- if (unlikely(res != p->irq && res != -EEXIST)) {
- printk(KERN_INFO "can not get irq_desc for %d\n",
- p->irq);
- continue;
- }
-
- disable_irq_nosync(p->irq);
- irq_set_chip_and_handler_name(p->irq, &desc->chip,
- handle_level_irq, "level");
- irq_set_chip_data(p->irq, p);
- disable_ipr_irq(irq_get_irq_data(p->irq));
- }
-}
-EXPORT_SYMBOL(register_ipr_controller);
diff --git a/arch/sh/kernel/cpu/pfc.c b/arch/sh/kernel/cpu/pfc.c
deleted file mode 100644
index 062056ede88de4..00000000000000
--- a/arch/sh/kernel/cpu/pfc.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <cpu/pfc.h>
-
-static struct platform_device sh_pfc_device = {
- .id = -1,
-};
-
-int __init sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources)
-{
- sh_pfc_device.name = name;
- sh_pfc_device.num_resources = num_resources;
- sh_pfc_device.resource = resource;
-
- return platform_device_register(&sh_pfc_device);
-}
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
deleted file mode 100644
index a306bcd6b34130..00000000000000
--- a/arch/sh/kernel/cpu/proc.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/machvec.h>
-#include <asm/processor.h>
-
-static const char *cpu_name[] = {
- [CPU_SH7201] = "SH7201",
- [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
- [CPU_SH7264] = "SH7264", [CPU_SH7269] = "SH7269",
- [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
- [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
- [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
- [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
- [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729",
- [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S",
- [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751",
- [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760",
- [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
- [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
- [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
- [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
- [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
- [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
- [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
- [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
- [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
- [CPU_J2] = "J2",
- [CPU_SH_NONE] = "Unknown"
-};
-
-const char *get_cpu_subtype(struct sh_cpuinfo *c)
-{
- return cpu_name[c->type];
-}
-EXPORT_SYMBOL(get_cpu_subtype);
-
-#ifdef CONFIG_PROC_FS
-/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
-static const char *cpu_flags[] = {
- "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
- "ptea", "llsc", "l2", "op32", "pteaex", NULL
-};
-
-static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
-{
- unsigned long i;
-
- seq_printf(m, "cpu flags\t:");
-
- if (!c->flags) {
- seq_printf(m, " %s\n", cpu_flags[0]);
- return;
- }
-
- for (i = 0; cpu_flags[i]; i++)
- if ((c->flags & (1 << i)))
- seq_printf(m, " %s", cpu_flags[i+1]);
-
- seq_printf(m, "\n");
-}
-
-static void show_cacheinfo(struct seq_file *m, const char *type,
- struct cache_info info)
-{
- unsigned int cache_size;
-
- cache_size = info.ways * info.sets * info.linesz;
-
- seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
- type, cache_size >> 10, info.ways);
-}
-
-/*
- * Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- struct sh_cpuinfo *c = v;
- unsigned int cpu = c - cpu_data;
-
- if (!cpu_online(cpu))
- return 0;
-
- if (cpu == 0)
- seq_printf(m, "machine\t\t: %s\n", get_system_type());
- else
- seq_printf(m, "\n");
-
- seq_printf(m, "processor\t: %d\n", cpu);
- seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
- seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
- if (c->cut_major == -1)
- seq_printf(m, "cut\t\t: unknown\n");
- else if (c->cut_minor == -1)
- seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
- else
- seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
-
- show_cpuflags(m, c);
-
- seq_printf(m, "cache type\t: ");
-
- /*
- * Check for what type of cache we have, we support both the
- * unified cache on the SH-2 and SH-3, as well as the harvard
- * style cache on the SH-4.
- */
- if (c->icache.flags & SH_CACHE_COMBINED) {
- seq_printf(m, "unified\n");
- show_cacheinfo(m, "cache", c->icache);
- } else {
- seq_printf(m, "split (harvard)\n");
- show_cacheinfo(m, "icache", c->icache);
- show_cacheinfo(m, "dcache", c->dcache);
- }
-
- /* Optional secondary cache */
- if (c->flags & CPU_HAS_L2_CACHE)
- show_cacheinfo(m, "scache", c->scache);
-
- seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
-
- seq_printf(m, "bogomips\t: %lu.%02lu\n",
- c->loops_per_jiffy/(500000/HZ),
- (c->loops_per_jiffy/(5000/HZ)) % 100);
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile
deleted file mode 100644
index 214c3a5b184ace..00000000000000
--- a/arch/sh/kernel/cpu/sh2/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2 backends.
-#
-
-obj-y := ex.o probe.o entry.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
-
-# SMP setup
-smp-$(CONFIG_CPU_J2) := smp-j2.o
-obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
deleted file mode 100644
index d66d194c7731b9..00000000000000
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/clock-sh7619.c
- *
- * SH7619 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/processor.h>
-
-static const int pll1rate[] = {1,2};
-static const int pfc_divisors[] = {1,2,0,4};
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7619_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7619_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7619_clk_ops[] = {
- &sh7619_master_clk_ops,
- &sh7619_module_clk_ops,
- &sh7619_bus_clk_ops,
- &sh7619_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
- test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- BUG_ON(!pll2_mult);
-
- if (idx < ARRAY_SIZE(sh7619_clk_ops))
- *ops = sh7619_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
deleted file mode 100644
index 0a1c2bf216bc03..00000000000000
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ /dev/null
@@ -1,373 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/entry.S
- *
- * The SH-2 exception entry
- *
- * Copyright (C) 2005-2008 Yoshinori Sato
- * Copyright (C) 2005 AXE,Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- mov.l r3,@-sp
- cli
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov.l @r2,r0
- mov.l @(5*4,r15),r3 ! previous SR
- or r0,r3 ! set MD
- tst r0,r0
- bf/s 1f ! previous mode check
- mov.l r3,@(5*4,r15) ! update SR
- ! switch to kernel mode
- mov.l __md_bit,r0
- mov.l r0,@r2 ! enter kernel mode
- mov.l $current_thread_info,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r0
- mov.l @r0,r0
- mov.l @r0,r0
- shll2 r0
- add r0,r2
-#endif
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(5*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r3
- add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame
- mov.l r3,@-r15 ! original SP
- mov.l r14,@-r15
- mov.l r13,@-r15
- mov.l r12,@-r15
- mov.l r11,@-r15
- mov.l r10,@-r15
- mov.l r9,@-r15
- mov.l r8,@-r15
- mov.l r7,@-r15
- mov.l r6,@-r15
- mov.l r5,@-r15
- mov.l r4,@-r15
- mov r1,r9 ! save TRA
- mov r2,r8 ! copy user -> kernel stack
- mov.l @(0,r8),r3
- mov.l r3,@-r15
- mov.l @(4,r8),r2
- mov.l r2,@-r15
- mov.l @(12,r8),r1
- mov.l r1,@-r15
- mov.l @(8,r8),r0
- bra 2f
- mov.l r0,@-r15
-1:
- ! in kernel exception
- mov #(22-4-4-1)*4+4,r0
- mov r15,r2
- sub r0,r15
- mov.l @r2+,r0 ! old R3
- mov.l r0,@-r15
- mov.l @r2+,r0 ! old R2
- mov.l r0,@-r15
- mov.l @(4,r2),r0 ! old R1
- mov.l r0,@-r15
- mov.l @r2,r0 ! old R0
- mov.l r0,@-r15
- add #8,r2
- mov.l @r2+,r3 ! old PC
- mov.l @r2+,r0 ! old SR
- add #-4,r2 ! exception frame stub (sr)
- mov.l r1,@-r2 ! TRA
- sts.l macl, @-r2
- sts.l mach, @-r2
- stc.l gbr, @-r2
- mov.l r0,@-r2 ! save old SR
- sts.l pr,@-r2
- mov.l r3,@-r2 ! save old PC
- mov r2,r0
- add #8*4,r0
- mov.l r0,@-r2 ! save old SP
- mov.l r14,@-r2
- mov.l r13,@-r2
- mov.l r12,@-r2
- mov.l r11,@-r2
- mov.l r10,@-r2
- mov.l r9,@-r2
- mov.l r8,@-r2
- mov.l r7,@-r2
- mov.l r6,@-r2
- mov.l r5,@-r2
- mov.l r4,@-r2
- mov r1,r9
- mov.l @(OFF_R0,r15),r0
- mov.l @(OFF_R1,r15),r1
- mov.l @(OFF_R2,r15),r2
- mov.l @(OFF_R3,r15),r3
-2:
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-#ifdef CONFIG_CPU_J2
- mov #16,r8
- cmp/hs r8,r9
- bt interrupt_entry ! 31 > vec >= 16 is interrupt
-#endif
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 6f,r9
- mov.l 7f,r8
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov #OFF_SR,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov #OFF_SP,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov #OFF_PC,r0
- mov.l @(r0,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov #OFF_SR,r3
- mov.l @(r0,r3),r1
- mov.l __md_bit,r3
- and r1,r3 ! copy MD bit
- mov.l r3,@r2
- shll2 r1 ! clear MD bit
- shlr2 r1
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov #OFF_PC,r3
- mov.l @(r0,r3),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r1
-#endif
- mov.l r0,@r1
- mov.l @r15+,r0
- mov.l @r15+,r1
- mov.l @r15+,r2
- mov.l @r15+,r3
- mov.l @r15+,r4
- mov.l @r15+,r5
- mov.l @r15+,r6
- mov.l @r15+,r7
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- mov.l @r15+,r11
- mov.l @r15+,r12
- mov.l @r15+,r13
- mov.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-__md_bit:
- .long 0x40000000
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-#ifdef CONFIG_SMP
-$cpuid:
- .long sh2_cpuid_addr
-#endif
-
-! common exception handler
-#include "../../entry-common.S"
-
-#ifdef CONFIG_NR_CPUS
-#define NR_CPUS CONFIG_NR_CPUS
-#else
-#define NR_CPUS 1
-#endif
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .rept NR_CPUS
- .long 0x40000000
- .endr
-
-#ifdef CONFIG_SMP
-.global sh2_cpuid_addr
-sh2_cpuid_addr:
- .long dummy_cpuid
-dummy_cpuid:
- .long 0
-#endif
-
- .section .bss
-__current_thread_info:
- .rept NR_CPUS
- .long 0
- .endr
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
deleted file mode 100644
index dd0cc887a3ca2c..00000000000000
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/ex.S
- *
- * The SH-2 exception vector table
- *
- * Copyright (C) 2005 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-exception_entry:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline:
- mov.l r0,@-sp
- mov.l $exception_handler,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-$exception_entry:
- .long exception_entry
-$exception_handler:
- .long exception_handler
-!
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
deleted file mode 100644
index d342ea08843f6a..00000000000000
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/probe.c
- *
- * CPU Subtype Probing for SH-2.
- *
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/of_fdt.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_CPU_J2)
-extern u32 __iomem *j2_ccr_base;
-static int __init scan_cache(unsigned long node, const char *uname,
- int depth, void *data)
-{
- if (!of_flat_dt_is_compatible(node, "jcore,cache"))
- return 0;
-
- j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
-
- return 1;
-}
-#endif
-
-void __ref cpu_probe(void)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
- boot_cpu_data.type = CPU_SH7619;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1<<12);
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-#endif
-
-#if defined(CONFIG_CPU_J2)
-#if defined(CONFIG_SMP)
- unsigned cpu = hard_smp_processor_id();
-#else
- unsigned cpu = 0;
-#endif
- if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
- if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
- if (cpu != 0) return;
- boot_cpu_data.type = CPU_J2;
-
- /* These defaults are appropriate for the original/current
- * J2 cache. Once there is a proper framework for getting cache
- * info from device tree, we should switch to that. */
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.linesz = 32;
- boot_cpu_data.dcache.flags = 0;
-
- boot_cpu_data.flags |= CPU_HAS_CAS_L;
-#else
- /*
- * SH-2 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
-#endif
- boot_cpu_data.icache = boot_cpu_data.dcache;
- boot_cpu_data.family = CPU_FAMILY_SH2;
-}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
deleted file mode 100644
index b1c877b6a4207f..00000000000000
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7619 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, EDMAC, CMT0, CMT1,
- SCIF0, SCIF1, SCIF2,
- HIF_HIFI, HIF_HIFBI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- SIOF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
- INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
- INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
- INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
- INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
- INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
- INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
- INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
- INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
- INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
- INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
- INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
- INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
- INTC_IRQ(SIOF, 108),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
- { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
- { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
- { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xf8400000, 0x100),
- DEFINE_RES_IRQ(88),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xf8410000, 0x100),
- DEFINE_RES_IRQ(92),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xf8420000, 0x100),
- DEFINE_RES_IRQ(96),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_eth_plat_data eth_platform_data = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = 0xfb000000,
- .end = 0xfb0001c7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device eth_device = {
- .name = "sh7619-ether",
- .id = -1,
- .dev = {
- .platform_data = ð_platform_data,
- },
- .num_resources = ARRAY_SIZE(eth_resources),
- .resource = eth_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xf84a0070, 0x10),
- DEFINE_RES_IRQ(86),
- DEFINE_RES_IRQ(87),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct platform_device *sh7619_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- ð_device,
- &cmt_device,
-};
-
-static int __init sh7619_devices_setup(void)
-{
- return platform_add_devices(sh7619_devices,
- ARRAY_SIZE(sh7619_devices));
-}
-arch_initcall(sh7619_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7619_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
-};
-
-#define STBCR3 0xf80a0000
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
-
- sh_early_platform_add_devices(sh7619_early_devices,
- ARRAY_SIZE(sh7619_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2/smp-j2.c b/arch/sh/kernel/cpu/sh2/smp-j2.c
deleted file mode 100644
index d0d5d81455ae1e..00000000000000
--- a/arch/sh/kernel/cpu/sh2/smp-j2.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SMP support for J2 processor
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/cmpxchg.h>
-
-DEFINE_PER_CPU(unsigned, j2_ipi_messages);
-
-extern u32 *sh2_cpuid_addr;
-static u32 *j2_ipi_trigger;
-static int j2_ipi_irq;
-
-static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned cpu = hard_smp_processor_id();
- volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu);
- unsigned messages, i;
-
- do messages = *pmsg;
- while (cmpxchg(pmsg, messages, 0) != messages);
-
- if (!messages) return IRQ_NONE;
-
- for (i=0; i<SMP_MSG_NR; i++)
- if (messages & (1U<<i))
- smp_message_recv(i);
-
- return IRQ_HANDLED;
-}
-
-static void j2_smp_setup(void)
-{
-}
-
-static void j2_prepare_cpus(unsigned int max_cpus)
-{
- struct device_node *np;
- unsigned i, max = 1;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller");
- if (!np)
- goto out;
-
- j2_ipi_irq = irq_of_parse_and_map(np, 0);
- j2_ipi_trigger = of_iomap(np, 0);
- if (!j2_ipi_irq || !j2_ipi_trigger)
- goto out;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio");
- if (!np)
- goto out;
-
- sh2_cpuid_addr = of_iomap(np, 0);
- if (!sh2_cpuid_addr)
- goto out;
-
- if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU,
- "ipi", (void *)j2_ipi_interrupt_handler) != 0)
- goto out;
-
- max = max_cpus;
-out:
- /* Disable any cpus past max_cpus, or all secondaries if we didn't
- * get the necessary resources to support SMP. */
- for (i=max; i<NR_CPUS; i++) {
- set_cpu_possible(i, false);
- set_cpu_present(i, false);
- }
-}
-
-static void j2_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- struct device_node *np;
- u32 regs[2];
- void __iomem *release, *initpc;
-
- if (!cpu) return;
-
- np = of_get_cpu_node(cpu, NULL);
- if (!np) return;
-
- if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return;
- release = ioremap(regs[0], sizeof(u32));
- initpc = ioremap(regs[1], sizeof(u32));
-
- __raw_writel(entry_point, initpc);
- __raw_writel(1, release);
-
- iounmap(initpc);
- iounmap(release);
-
- pr_info("J2 SMP: requested start of cpu %u\n", cpu);
-}
-
-static unsigned int j2_smp_processor_id(void)
-{
- return __raw_readl(sh2_cpuid_addr);
-}
-
-static void j2_send_ipi(unsigned int cpu, unsigned int message)
-{
- volatile unsigned *pmsg;
- unsigned old;
- unsigned long val;
-
- /* There is only one IPI interrupt shared by all messages, so
- * we keep a separate interrupt flag per message type in sw. */
- pmsg = &per_cpu(j2_ipi_messages, cpu);
- do old = *pmsg;
- while (cmpxchg(pmsg, old, old|(1U<<message)) != old);
-
- /* Generate the actual interrupt by writing to CCRn bit 28. */
- val = __raw_readl(j2_ipi_trigger + cpu);
- __raw_writel(val | (1U<<28), j2_ipi_trigger + cpu);
-}
-
-static struct plat_smp_ops j2_smp_ops = {
- .smp_setup = j2_smp_setup,
- .prepare_cpus = j2_prepare_cpus,
- .start_cpu = j2_start_cpu,
- .smp_processor_id = j2_smp_processor_id,
- .send_ipi = j2_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops);
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
deleted file mode 100644
index 2a7515b658fd38..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2A backends.
-#
-
-obj-y := common.o probe.o opcode_helper.o
-
-common-y += ex.o entry.o
-
-obj-$(CONFIG_SH_FPU) += fpu.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7201) += setup-sh7201.o clock-sh7201.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7264) += setup-sh7264.o clock-sh7264.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7269) += setup-sh7269.o clock-sh7269.o
-obj-$(CONFIG_CPU_SUBTYPE_MXG) += setup-mxg.o clock-sh7206.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) := pinmux-sh7203.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o
-
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
deleted file mode 100644
index 5a5daaafb27a49..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7201.c
- *
- * SH7201 support for the clock framework
- *
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate = 10000000 * pll2_mult *
- pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7201_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7201_clk_ops[] = {
- &sh7201_master_clk_ops,
- &sh7201_module_clk_ops,
- &sh7201_bus_clk_ops,
- &sh7201_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 2;
- else
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7201_clk_ops))
- *ops = sh7201_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
deleted file mode 100644
index c6205394566441..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7203.c
- *
- * SH7203 support for the clock framework
- *
- * Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd)
- *
- * Based on clock-sh7263.c
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={8,12,16,0};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
-}
-
-static struct sh_clk_ops sh7203_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7203_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx-2];
-}
-
-static struct sh_clk_ops sh7203_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7203_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7203_clk_ops[] = {
- &sh7203_master_clk_ops,
- &sh7203_module_clk_ops,
- &sh7203_bus_clk_ops,
- &sh7203_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
- else if (test_mode_pin(MODE_PIN0))
- pll2_mult = 2;
- else
- pll2_mult = 1;
-
- if (idx < ARRAY_SIZE(sh7203_clk_ops))
- *ops = sh7203_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
deleted file mode 100644
index d286d7b918d5e3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7206.c
- *
- * SH7206 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7206_clk_ops[] = {
- &sh7206_master_clk_ops,
- &sh7206_module_clk_ops,
- &sh7206_bus_clk_ops,
- &sh7206_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7206_clk_ops))
- *ops = sh7206_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
deleted file mode 100644
index d9acc1ed79817c..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7264.c
- *
- * SH7264 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7264 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-#define STBCR8 0xfffe041c
-
-static const unsigned int pll1rate[] = {8, 12};
-
-static unsigned int pll1_div;
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 18000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long rate = clk->parent->rate / pll1_div;
- return rate * pll1rate[(__raw_readw(FRQCR) >> 8) & 1];
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
-};
-
-static int div2[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_P,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 4, 0x7, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x78, CLK_ENABLE_REG_16BIT),
-};
-
-enum { MSTP77, MSTP74, MSTP72,
- MSTP60,
- MSTP35, MSTP34, MSTP33, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP77] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 7, 0), /* SCIF */
- [MSTP74] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 4, 0), /* VDC */
- [MSTP72] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR6, 0, 0), /* USB */
- [MSTP35] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 6, 0), /* MTU2 */
- [MSTP34] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 4, 0), /* SDHI0 */
- [MSTP33] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 3, 0), /* SDHI1 */
- [MSTP32] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP77]),
- CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP34]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP33]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- if (test_mode_pin(MODE_PIN0)) {
- if (test_mode_pin(MODE_PIN1))
- pll1_div = 3;
- else
- pll1_div = 4;
- } else
- pll1_div = 1;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
deleted file mode 100644
index c17ab0d7653888..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
- *
- * SH7269 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7269 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-
-#define PLL_RATE 20
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 13340000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
- return clk->parent->rate / 8;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
- .recalc = peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
- .ops = &peripheral0_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
- return clk->parent->rate / 4;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
- .recalc = peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
- .ops = &peripheral1_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
- &peripheral0_clk,
- &peripheral1_clk,
-};
-
-static int div2[] = { 1, 2, 0, 4 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_B,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
-};
-
-enum { MSTP72,
- MSTP60,
- MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP35, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
- [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
- [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
- [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
- [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
- [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
- [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
- [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
- [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
- [MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
- [MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP47]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP46]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP45]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP44]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP43]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP42]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP41]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
deleted file mode 100644
index 9f11fc8b505251..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ /dev/null
@@ -1,247 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/entry.S
- *
- * The SH-2A exception entry
- *
- * Copyright (C) 2008 Yoshinori Sato
- * Based on arch/sh/kernel/cpu/sh2/entry.S
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- cli
- mov.l $cpu_mode,r2
- bld.b #6,@(0,r2) !previus SR.MD
- bst.b #6,@(4*4,r15) !set cpu mode to SR.MD
- bt 1f
- ! switch to kernel mode
- bset.b #6,@(0,r2) !set SR.MD
- mov.l $current_thread_info,r2
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0 ! r0 = kernel stack tail
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(3*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r0
- add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame
- lds r0,pr ! pr = original SP
- movmu.l r3,@-r15 ! save regs
- mov r2,r8 ! r8 = previus stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore previous stack
- mov.l @r8+,r2
- mov.l @r8+,r0
- mov.l @r8+,r1
- bra 2f
- movml.l r2,@-r15
-1:
- ! in kernel exception
- mov r15,r2
- add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
- movmu.l r3,@-r15
- mov r2,r8 ! r8 = previous stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore exception frame & regs
- mov.l @r8+,r2 ! old R2
- mov.l @r8+,r0 ! old R0
- mov.l @r8+,r1 ! old R1
- mov.l @r8+,r10 ! old PC
- mov.l @r8+,r11 ! old SR
- movml.l r2,@-r15
- mov.l r10,@(OFF_PC,r15)
- mov.l r11,@(OFF_SR,r15)
- mov.l r8,@(OFF_SP,r15) ! save old sp
- mov r15,r8
- add #OFF_TRA + 4,r8
- mov.l r9,@-r8
- sts.l macl,@-r8
- sts.l mach,@-r8
- stc.l gbr,@-r8
- add #-4,r8
- sts.l pr,@-r8
-2:
- ! dispatch exception / interrupt
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 7f,r8
- mov.l 6f,r9
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov.l @(OFF_SR,r2),r3
- mov.l r3,@-r1
- mov.l @(OFF_SP,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- movml.l @r15+,r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov.l @(OFF_PC,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
- bld.b #6,@(OFF_SR,r15)
- bst.b #6,@(0,r2) ! save CPU mode
- mov.l @(OFF_SR,r0),r1
- shll2 r1
- shlr2 r1 ! clear MD bit
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov.l @(OFF_PC,r0),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
- mov.l r0,@r1
- movml.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-
-! common exception handler
-#include "../../entry-common.S"
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .long 0x40000000
-
- .section .bss
-__current_thread_info:
- .long 0
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
deleted file mode 100644
index ed91996287c7d9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/ex.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/ex.S
- *
- * The SH-2A exception vector table
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-
-! exception no 0 to 255
-exception_entry0:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline0
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline0:
- mov.l r0,@-sp
- mov.l 1f,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
-! exception no 256 to 511
-exception_entry1:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline1
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline1:
- mov.l r0,@-sp
- extu.b r1,r1
- movi20 #0x100,r0
- add r0,r1
- mov.l 1f,r0
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
- !
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry0 + vector * 6
-vector = vector + 1
- .endr
-vector = 0
- .rept 256
- .long exception_entry1 + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
deleted file mode 100644
index 0bcff11a4843d3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- *
- * FIXME! These routines can be optimized in big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t"
- : "=r" (dummy)
- : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r" (FPSCR_RCHG),
- "r" (FPSCR_INIT)
- : "memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- : "=r" (dummy)
- : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- : "memory");
- disable_fpu();
-}
-
-/*
- * Emulate arithmetic ops on denormalized number for some FPU insns.
- */
-
-/* denormalized float * float */
-static int denormal_mulf(int hx, int hy)
-{
- unsigned int ix, iy;
- unsigned long long m, n;
- int exp, w;
-
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000 || ix == 0)
- return ((hx ^ hy) & 0x80000000);
-
- exp = (iy & 0x7f800000) >> 23;
- ix &= 0x007fffff;
- iy = (iy & 0x007fffff) | 0x00800000;
- m = (unsigned long long)ix * iy;
- n = m;
- w = -1;
- while (n) { n >>= 1; w++; }
-
- /* FIXME: use guard bits */
- exp += w - 126 - 46;
- if (exp > 0)
- ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23);
- else if (exp + 22 >= 0)
- ix = (int) (m >> (w - 22 - exp)) & 0x007fffff;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x80000000;
- return ix;
-}
-
-/* denormalized double * double */
-static void mult64(unsigned long long x, unsigned long long y,
- unsigned long long *highp, unsigned long long *lowp)
-{
- unsigned long long sub0, sub1, sub2, sub3;
- unsigned long long high, low;
-
- sub0 = (x >> 32) * (unsigned long) (y >> 32);
- sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32);
- sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL);
- sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL);
- low = sub3;
- high = 0LL;
- sub3 += (sub1 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- sub3 += (sub2 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- high += (sub1 >> 32) + (sub2 >> 32);
- high += sub0;
- *lowp = low;
- *highp = high;
-}
-
-static inline long long rshift64(unsigned long long mh,
- unsigned long long ml, int n)
-{
- if (n >= 64)
- return mh >> (n - 64);
- return (mh << (64 - n)) | (ml >> n);
-}
-
-static long long denormal_muld(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- unsigned long long mh, ml, nh, nl;
- int exp, w;
-
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL || ix == 0)
- return ((hx ^ hy) & 0x8000000000000000LL);
-
- exp = (iy & 0x7ff0000000000000LL) >> 52;
- ix &= 0x000fffffffffffffLL;
- iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- mult64(ix, iy, &mh, &ml);
- nh = mh;
- nl = ml;
- w = -1;
- if (nh) {
- while (nh) { nh >>= 1; w++;}
- w += 64;
- } else
- while (nl) { nl >>= 1; w++;}
-
- /* FIXME: use guard bits */
- exp += w - 1022 - 52 * 2;
- if (exp > 0)
- ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL)
- | ((long long)exp << 52);
- else if (exp + 51 >= 0)
- ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x8000000000000000LL;
- return ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static int denormal_subf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix - iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac -= iy;
- while (frac < 0x00800000) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static int denormal_addf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix + iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac += iy;
- if (frac >= 0x01000000) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-static int denormal_addf(int hx, int hy)
-{
- unsigned int ix, iy;
- int sign;
-
- if ((hx ^ hy) & 0x80000000) {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000) {
- ix = denormal_subf1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x80000000;
- }
- } else {
- ix = denormal_subf1(iy, ix);
- sign ^= 0x80000000;
- }
- } else {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000)
- ix = denormal_addf1(ix, iy);
- else
- ix = denormal_addf1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_subd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- int exp;
-
- if (ix < 0x0010000000000000LL)
- return ix - iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac -= iy;
- while (frac < 0x0010000000000000LL) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_addd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- long long exp;
-
- if (ix < 0x0010000000000000LL)
- return ix + iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac += iy;
- if (frac >= 0x0020000000000000LL) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-static long long denormal_addd(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- long long sign;
-
- if ((hx ^ hy) & 0x8000000000000000LL) {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL) {
- ix = denormal_subd1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x8000000000000000LL;
- }
- } else {
- ix = denormal_subd1(iy, ix);
- sign ^= 0x8000000000000000LL;
- }
- } else {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL)
- ix = denormal_addd1(ix, iy);
- else
- ix = denormal_addd1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void
-denormal_to_double (struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n+1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int
-ieee_fpe_handler (struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *) regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf};
-
- if (nib[0] == 0xb ||
- (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
- regs->pr = regs->pc + 4;
- if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
- nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (insn == 0x000b) { /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else {
- nextpc = regs->pc + 2;
- finsn = insn;
- }
-
-#define FPSCR_FPU_ERROR (1 << 17)
-
- if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
- /* FPU error */
- denormal_to_double (&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) { /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((hx & 0x7fffffff) >= 0x00100000)
- llx = denormal_muld(lly, llx);
- else
- llx = denormal_muld(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((hx & 0x7fffffff) >= 0x00800000)
- hx = denormal_mulf(hy, hx);
- else
- hx = denormal_mulf(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = denormal_addd(llx, lly);
- else
- llx = denormal_addd(llx, lly ^ (1LL << 63));
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((finsn & 0xf00f) == 0xf000)
- hx = denormal_addf(hx, hy);
- else
- hx = denormal_addf(hx, hy ^ 0x80000000);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- return;
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh2a/opcode_helper.c b/arch/sh/kernel/cpu/sh2a/opcode_helper.c
deleted file mode 100644
index c509081d90b9af..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/opcode_helper.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/opcode_helper.c
- *
- * Helper for the SH-2A 32-bit opcodes.
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-
-/*
- * Instructions on SH are generally fixed at 16-bits, however, SH-2A
- * introduces some 32-bit instructions. Since there are no real
- * constraints on their use (and they can be mixed and matched), we need
- * to check the instruction encoding to work out if it's a true 32-bit
- * instruction or not.
- *
- * Presently, 32-bit opcodes have only slight variations in what the
- * actual encoding looks like in the first-half of the instruction, which
- * makes it fairly straightforward to differentiate from the 16-bit ones.
- *
- * First 16-bits of encoding Used by
- *
- * 0011nnnnmmmm0001 mov.b, mov.w, mov.l, fmov.d,
- * fmov.s, movu.b, movu.w
- *
- * 0011nnnn0iii1001 bclr.b, bld.b, bset.b, bst.b, band.b,
- * bandnot.b, bldnot.b, bor.b, bornot.b,
- * bxor.b
- *
- * 0000nnnniiii0000 movi20
- * 0000nnnniiii0001 movi20s
- */
-unsigned int instruction_size(unsigned int insn)
-{
- /* Look for the common cases */
- switch ((insn & 0xf00f)) {
- case 0x0000: /* movi20 */
- case 0x0001: /* movi20s */
- case 0x3001: /* 32-bit mov/fmov/movu variants */
- return 4;
- }
-
- /* And the special cases.. */
- switch ((insn & 0xf08f)) {
- case 0x3009: /* 32-bit b*.b bit operations */
- return 4;
- }
-
- return 2;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
deleted file mode 100644
index a6777e6fc8cdc2..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7203_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe3a9f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7203", sh7203_pfc_resources,
- ARRAY_SIZE(sh7203_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
deleted file mode 100644
index 7a103e16cf01b0..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7264_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe393f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7264", sh7264_pfc_resources,
- ARRAY_SIZE(sh7264_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
deleted file mode 100644
index 4da432ef1b40a9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7269_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe391f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7269", sh7269_pfc_resources,
- ARRAY_SIZE(sh7269_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
deleted file mode 100644
index c66a3bc882bf9a..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/probe.c
- *
- * CPU Subtype Probing for SH-2A.
- *
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- boot_cpu_data.family = CPU_FAMILY_SH2A;
-
- /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
- boot_cpu_data.flags |= CPU_HAS_OP32;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
- boot_cpu_data.type = CPU_SH7201;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203)
- boot_cpu_data.type = CPU_SH7203;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7263)
- boot_cpu_data.type = CPU_SH7263;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7264)
- boot_cpu_data.type = CPU_SH7264;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
- boot_cpu_data.type = CPU_SH7269;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
- boot_cpu_data.type = CPU_SH7206;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#elif defined(CONFIG_CPU_SUBTYPE_MXG)
- boot_cpu_data.type = CPU_MXG;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#endif
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * The icache is the same as the dcache as far as this setup is
- * concerned. The only real difference in hardware is that the icache
- * lacks the U bit that the dcache has, none of this has any bearing
- * on the cache info.
- */
- boot_cpu_data.icache = boot_cpu_data.dcache;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
deleted file mode 100644
index cefa07924c16db..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas MX-G (R8A03022BG) Setup
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
-
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
-
- SCIF0, SCIF1,
-
- MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
- MTU2_TGI3B, MTU2_TGI3C,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
- INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
- INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
- INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
- INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
- INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
- INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
-
- INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
- INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
- INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
- INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
-
- INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
- INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
- INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
-
- INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
- INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
- INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
-
- INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
- INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
-
- INTC_IRQ(MTU2_TGI3B, 244),
- INTC_IRQ(MTU2_TGI3C, 245),
-
- INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
- INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
- INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
-
- INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
- INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
- { 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
- { 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
- { 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
- { 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
- { 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
- { 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
- { 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
- { 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
- { 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
- { 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
- { 0xfffd9812, 0, 16, 4, /* IPR15 */
- { SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
- { 0xfffd9814, 0, 16, 4, /* IPR16 */
- { MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffd9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xff801000, 0x400),
- DEFINE_RES_IRQ_NAMED(228, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(234, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(240, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff804000, 0x100),
- DEFINE_RES_IRQ(220),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct platform_device *mxg_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-static int __init mxg_devices_setup(void)
-{
- return platform_add_devices(mxg_devices,
- ARRAY_SIZE(mxg_devices));
-}
-arch_initcall(mxg_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *mxg_early_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(mxg_early_devices,
- ARRAY_SIZE(mxg_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
deleted file mode 100644
index 28f1bebf340565..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7201 setup
- *
- * Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- ADC_ADI,
-
- MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
- MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
-
- RTC, WDT,
-
- IIC30, IIC31, IIC32,
-
- DMAC0_DMINT0, DMAC1_DMINT1,
- DMAC2_DMINT2, DMAC3_DMINT3,
-
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-
- DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
- DMAC7_DMINT7,
-
- RCAN0, RCAN1,
-
- SSI0_SSII, SSI1_SSII,
-
- TMR0, TMR1,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(ADC_ADI, 92),
-
- INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
- INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
-
- INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
- INTC_IRQ(MTU20_VEF, 114),
-
- INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
- INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
-
- INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
- INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
-
- INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
- INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
-
- INTC_IRQ(MTU2_TCI3V, 136),
-
- INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
- INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
-
- INTC_IRQ(MTU2_TCI4V, 144),
-
- INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
- INTC_IRQ(MTU25_UVW, 150),
-
- INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
- INTC_IRQ(RTC, 154),
-
- INTC_IRQ(WDT, 156),
-
- INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
- INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
- INTC_IRQ(IIC30, 161),
-
- INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
- INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
- INTC_IRQ(IIC31, 168),
-
- INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
- INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
- INTC_IRQ(IIC32, 174),
-
- INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
- INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
-
- INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
- INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
- INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
- INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
- INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
- INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
- INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
- INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
- INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
- INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
- INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
- INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
- INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
- INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
- INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
- INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
-
- INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
- INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
- INTC_IRQ(DMAC7_DMINT7, 219),
-
- INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
- INTC_IRQ(RCAN0, 230),
- INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
-
- INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
- INTC_IRQ(RCAN1, 236),
- INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
-
- INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
-
- INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
- INTC_IRQ(TMR0, 248),
-
- INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
- INTC_IRQ(TMR1, 254),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe9420, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI, 0 } },
- { 0xfffe9800, 0, 16, 4, /* IPR06 */ { 0, MTU20_ABCD, MTU20_VEF, MTU21_AB } },
- { 0xfffe9802, 0, 16, 4, /* IPR07 */ { MTU21_VU, MTU22_AB, MTU22_VU, MTU23_ABCD } },
- { 0xfffe9804, 0, 16, 4, /* IPR08 */ { MTU2_TCI3V, MTU24_ABCD, MTU2_TCI4V, MTU25_UVW } },
-
- { 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
- { 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
- { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
- { 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
- { 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } },
- { 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
- { 0xfffe9812, 0, 16, 4, /* IPR15 */ { 0, RCAN0, RCAN1, 0 } },
- { 0xfffe9814, 0, 16, 4, /* IPR16 */ { SSI0_SSII, SSI1_SSII, TMR0, TMR1 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(180),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(184),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(188),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(208),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff0800,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 152,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(108, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(116, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(124, "tgi1b"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7201_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &rtc_device,
- &mtu2_device,
-};
-
-static int __init sh7201_devices_setup(void)
-{
- return platform_add_devices(sh7201_devices,
- ARRAY_SIZE(sh7201_devices));
-}
-arch_initcall(sh7201_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7201_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-
-void __init plat_early_device_setup(void)
-{
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7201_early_devices,
- ARRAY_SIZE(sh7201_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
deleted file mode 100644
index 4839f3aaeb4c21..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 and SH7263 Setup
- *
- * Copyright (C) 2007 - 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- USB, LCDC, CMT0, CMT1, BSC, WDT,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
-
- ADC_ADI,
-
- IIC30, IIC31, IIC32, IIC33,
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- SSU0, SSU1,
-
- SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
-
- /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
- ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
- SRC, IEBI,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
- INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
- INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
- INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
- INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
- INTC_IRQ(MTU0_VEF, 150),
- INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
- INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
- INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
- INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
- INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
- INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
- INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
- INTC_IRQ(MTU2_TCI3V, 165),
- INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
- INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
- INTC_IRQ(MTU2_TCI4V, 170),
- INTC_IRQ(ADC_ADI, 171),
- INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
- INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
- INTC_IRQ(IIC30, 176),
- INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
- INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
- INTC_IRQ(IIC31, 181),
- INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
- INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
- INTC_IRQ(IIC32, 186),
- INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
- INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
- INTC_IRQ(IIC33, 191),
- INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
- INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
- INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
- INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
- INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
- INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
- INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
- INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
- INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
- INTC_IRQ(SSU0, 210),
- INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
- INTC_IRQ(SSU1, 213),
- INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
- INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
- INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
- INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
- INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
- INTC_IRQ(RTC, 233),
- INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
- INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
- INTC_IRQ(RCAN0, 238),
- INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
- INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
- INTC_IRQ(RCAN1, 243),
-
- /* SH7263-specific trash */
-#ifdef CONFIG_CPU_SUBTYPE_SH7263
- INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
- INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
- INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
-
- INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
- INTC_IRQ(SDHI, 230),
-
- INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
- INTC_IRQ(SRC, 246),
-
- INTC_IRQ(IEBI, 247),
-#endif
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB,
- MTU2_VU } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD,
- MTU2_TCI4V } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } },
-#ifdef CONFIG_CPU_SUBTYPE_SH7203
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, 0 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } },
-#else
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, ROMDEC } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } },
-#endif
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(142),
- DEFINE_RES_IRQ(143),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(146, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(153, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff2000,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 231,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct platform_device *sh7203_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
-};
-
-static int __init sh7203_devices_setup(void)
-{
- return platform_add_devices(sh7203_devices,
- ARRAY_SIZE(sh7203_devices));
-}
-arch_initcall(sh7203_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7203_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7203_early_devices,
- ARRAY_SIZE(sh7203_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
deleted file mode 100644
index 68add5af4cc56e..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7206 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- ADC_ADI0, ADC_ADI1,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
- IIC3,
-
- CMT0, CMT1, BSC, WDT,
-
- MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
-
- POE2_OEI3,
-
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
- INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
- INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
- INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
- INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
- INTC_IRQ(MTU0_VEF, 162),
- INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
- INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
- INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
- INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
- INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
- INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
- INTC_IRQ(MTU2_TCI3V, 184),
- INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
- INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
- INTC_IRQ(MTU2_TCI4V, 192),
- INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
- INTC_IRQ(MTU5, 198),
- INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
- INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
- INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
- INTC_IRQ(MTU2S_TCI3V, 208),
- INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
- INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
- INTC_IRQ(MTU2S_TCI4V, 216),
- INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
- INTC_IRQ(MTU5S, 222),
- INTC_IRQ(POE2_OEI3, 224),
- INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
- INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
- INTC_IRQ(IIC3, 232),
- INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
- INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
- INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
- INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
- INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
- INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
- INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
- INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU2_TCI3V } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V,
- MTU5, POE2_12 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V,
- MTU4S_ABCD, MTU2S_TCI4V } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(140),
- DEFINE_RES_IRQ(144),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(156, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(164, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(180, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2s",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7206_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-static int __init sh7206_devices_setup(void)
-{
- return platform_add_devices(sh7206_devices,
- ARRAY_SIZE(sh7206_devices));
-}
-arch_initcall(sh7206_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7206_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7206_early_devices,
- ARRAY_SIZE(sh7206_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
deleted file mode 100644
index 8a1cb613dd2e04..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
+++ /dev/null
@@ -1,552 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC3, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- SIO_FIFO, RSPIC0, RSPIC1,
- RCAN0, RCAN1, IEBC, CD_ROMD,
- NFMC, SDHI, RTC,
- SRCC0, SRCC1, DCOMU, OFFI, IFEI,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
- INTC_IRQ(VDC3, 171), INTC_IRQ(VDC3, 172),
- INTC_IRQ(VDC3, 173), INTC_IRQ(VDC3, 174),
- INTC_IRQ(CMT0, 175), INTC_IRQ(CMT1, 176),
- INTC_IRQ(BSC, 177), INTC_IRQ(WDT, 178),
-
- INTC_IRQ(MTU0_ABCD, 179), INTC_IRQ(MTU0_ABCD, 180),
- INTC_IRQ(MTU0_ABCD, 181), INTC_IRQ(MTU0_ABCD, 182),
- INTC_IRQ(MTU0_VEF, 183),
- INTC_IRQ(MTU0_VEF, 184), INTC_IRQ(MTU0_VEF, 185),
- INTC_IRQ(MTU1_AB, 186), INTC_IRQ(MTU1_AB, 187),
- INTC_IRQ(MTU1_VU, 188), INTC_IRQ(MTU1_VU, 189),
- INTC_IRQ(MTU2_AB, 190), INTC_IRQ(MTU2_AB, 191),
- INTC_IRQ(MTU2_VU, 192), INTC_IRQ(MTU2_VU, 193),
- INTC_IRQ(MTU3_ABCD, 194), INTC_IRQ(MTU3_ABCD, 195),
- INTC_IRQ(MTU3_ABCD, 196), INTC_IRQ(MTU3_ABCD, 197),
- INTC_IRQ(MTU3_TCI3V, 198),
- INTC_IRQ(MTU4_ABCD, 199), INTC_IRQ(MTU4_ABCD, 200),
- INTC_IRQ(MTU4_ABCD, 201), INTC_IRQ(MTU4_ABCD, 202),
- INTC_IRQ(MTU4_TCI4V, 203),
-
- INTC_IRQ(PWMT1, 204), INTC_IRQ(PWMT2, 205),
-
- INTC_IRQ(ADC_ADI, 206),
-
- INTC_IRQ(SSIF0, 207), INTC_IRQ(SSIF0, 208),
- INTC_IRQ(SSIF0, 209),
- INTC_IRQ(SSII1, 210), INTC_IRQ(SSII1, 211),
- INTC_IRQ(SSII2, 212), INTC_IRQ(SSII2, 213),
- INTC_IRQ(SSII3, 214), INTC_IRQ(SSII3, 215),
-
- INTC_IRQ(RSPDIF, 216),
-
- INTC_IRQ(IIC30, 217), INTC_IRQ(IIC30, 218),
- INTC_IRQ(IIC30, 219), INTC_IRQ(IIC30, 220),
- INTC_IRQ(IIC30, 221),
- INTC_IRQ(IIC31, 222), INTC_IRQ(IIC31, 223),
- INTC_IRQ(IIC31, 224), INTC_IRQ(IIC31, 225),
- INTC_IRQ(IIC31, 226),
- INTC_IRQ(IIC32, 227), INTC_IRQ(IIC32, 228),
- INTC_IRQ(IIC32, 229), INTC_IRQ(IIC32, 230),
- INTC_IRQ(IIC32, 231),
-
- INTC_IRQ(SCIF0_BRI, 232), INTC_IRQ(SCIF0_ERI, 233),
- INTC_IRQ(SCIF0_RXI, 234), INTC_IRQ(SCIF0_TXI, 235),
- INTC_IRQ(SCIF1_BRI, 236), INTC_IRQ(SCIF1_ERI, 237),
- INTC_IRQ(SCIF1_RXI, 238), INTC_IRQ(SCIF1_TXI, 239),
- INTC_IRQ(SCIF2_BRI, 240), INTC_IRQ(SCIF2_ERI, 241),
- INTC_IRQ(SCIF2_RXI, 242), INTC_IRQ(SCIF2_TXI, 243),
- INTC_IRQ(SCIF3_BRI, 244), INTC_IRQ(SCIF3_ERI, 245),
- INTC_IRQ(SCIF3_RXI, 246), INTC_IRQ(SCIF3_TXI, 247),
- INTC_IRQ(SCIF4_BRI, 248), INTC_IRQ(SCIF4_ERI, 249),
- INTC_IRQ(SCIF4_RXI, 250), INTC_IRQ(SCIF4_TXI, 251),
- INTC_IRQ(SCIF5_BRI, 252), INTC_IRQ(SCIF5_ERI, 253),
- INTC_IRQ(SCIF5_RXI, 254), INTC_IRQ(SCIF5_TXI, 255),
- INTC_IRQ(SCIF6_BRI, 256), INTC_IRQ(SCIF6_ERI, 257),
- INTC_IRQ(SCIF6_RXI, 258), INTC_IRQ(SCIF6_TXI, 259),
- INTC_IRQ(SCIF7_BRI, 260), INTC_IRQ(SCIF7_ERI, 261),
- INTC_IRQ(SCIF7_RXI, 262), INTC_IRQ(SCIF7_TXI, 263),
-
- INTC_IRQ(SIO_FIFO, 264),
-
- INTC_IRQ(RSPIC0, 265), INTC_IRQ(RSPIC0, 266),
- INTC_IRQ(RSPIC0, 267),
- INTC_IRQ(RSPIC1, 268), INTC_IRQ(RSPIC1, 269),
- INTC_IRQ(RSPIC1, 270),
-
- INTC_IRQ(RCAN0, 271), INTC_IRQ(RCAN0, 272),
- INTC_IRQ(RCAN0, 273), INTC_IRQ(RCAN0, 274),
- INTC_IRQ(RCAN0, 275),
- INTC_IRQ(RCAN1, 276), INTC_IRQ(RCAN1, 277),
- INTC_IRQ(RCAN1, 278), INTC_IRQ(RCAN1, 279),
- INTC_IRQ(RCAN1, 280),
-
- INTC_IRQ(IEBC, 281),
-
- INTC_IRQ(CD_ROMD, 282), INTC_IRQ(CD_ROMD, 283),
- INTC_IRQ(CD_ROMD, 284), INTC_IRQ(CD_ROMD, 285),
- INTC_IRQ(CD_ROMD, 286), INTC_IRQ(CD_ROMD, 287),
-
- INTC_IRQ(NFMC, 288), INTC_IRQ(NFMC, 289),
- INTC_IRQ(NFMC, 290), INTC_IRQ(NFMC, 291),
-
- INTC_IRQ(SDHI, 292), INTC_IRQ(SDHI, 293),
- INTC_IRQ(SDHI, 294),
-
- INTC_IRQ(RTC, 296), INTC_IRQ(RTC, 297),
- INTC_IRQ(RTC, 298),
-
- INTC_IRQ(SRCC0, 299), INTC_IRQ(SRCC0, 300),
- INTC_IRQ(SRCC0, 301), INTC_IRQ(SRCC0, 302),
- INTC_IRQ(SRCC0, 303),
- INTC_IRQ(SRCC1, 304), INTC_IRQ(SRCC1, 305),
- INTC_IRQ(SRCC1, 306), INTC_IRQ(SRCC1, 307),
- INTC_IRQ(SRCC1, 308),
-
- INTC_IRQ(DCOMU, 310), INTC_IRQ(DCOMU, 311),
- INTC_IRQ(DCOMU, 312),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC3, CMT0, CMT1 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU1_AB, MTU1_VU,
- MTU2_AB, MTU2_VU } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU3_ABCD, MTU3_TCI3V,
- MTU4_ABCD, MTU4_TCI4V } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { PWMT1, PWMT2, ADC_ADI, 0 } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSIF0, SSII1, SSII2, SSII3 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { RSPDIF, IIC30, IIC31, IIC32 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { SIO_FIFO, 0, RSPIC0, RSPIC1, } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { RCAN0, RCAN1, IEBC, CD_ROMD } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { NFMC, SDHI, RTC, 0 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { SRCC0, SRCC1, 0, DCOMU } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7264", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(233),
- DEFINE_RES_IRQ(234),
- DEFINE_RES_IRQ(235),
- DEFINE_RES_IRQ(232),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(237),
- DEFINE_RES_IRQ(238),
- DEFINE_RES_IRQ(239),
- DEFINE_RES_IRQ(236),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(241),
- DEFINE_RES_IRQ(242),
- DEFINE_RES_IRQ(243),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(245),
- DEFINE_RES_IRQ(246),
- DEFINE_RES_IRQ(247),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(249),
- DEFINE_RES_IRQ(250),
- DEFINE_RES_IRQ(251),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(253),
- DEFINE_RES_IRQ(254),
- DEFINE_RES_IRQ(255),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(257),
- DEFINE_RES_IRQ(258),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(256),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(262),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(260),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(175),
- DEFINE_RES_IRQ(176),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(179, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(186, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 296,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static void usb_port_power(int port, int power)
-{
- __raw_writew(0x200 , 0xffffc0c2) ; /* Initialise UACS25 */
-}
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
- .port_power = usb_port_power,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xffffc000,
- .end = 0xffffc0e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7264_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7264_devices_setup(void)
-{
- return platform_add_devices(sh7264_devices,
- ARRAY_SIZE(sh7264_devices));
-}
-arch_initcall(sh7264_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7264_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7264_early_devices,
- ARRAY_SIZE(sh7264_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
deleted file mode 100644
index 8b1ef3028320c7..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
+++ /dev/null
@@ -1,568 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC4, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3, SSII4, SSII5,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- RCAN0, RCAN1, RCAN2,
- RSPIC0, RSPIC1,
- IEBC, CD_ROMD,
- NFMC,
- SDHI0, SDHI1,
- RTC,
- SRCC0, SRCC1, SRCC2,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
-
- INTC_IRQ(VDC4, 171), INTC_IRQ(VDC4, 172),
- INTC_IRQ(VDC4, 173), INTC_IRQ(VDC4, 174),
- INTC_IRQ(VDC4, 175), INTC_IRQ(VDC4, 176),
- INTC_IRQ(VDC4, 177), INTC_IRQ(VDC4, 177),
-
- INTC_IRQ(CMT0, 188), INTC_IRQ(CMT1, 189),
-
- INTC_IRQ(BSC, 190), INTC_IRQ(WDT, 191),
-
- INTC_IRQ(MTU0_ABCD, 192), INTC_IRQ(MTU0_ABCD, 193),
- INTC_IRQ(MTU0_ABCD, 194), INTC_IRQ(MTU0_ABCD, 195),
- INTC_IRQ(MTU0_VEF, 196), INTC_IRQ(MTU0_VEF, 197),
- INTC_IRQ(MTU0_VEF, 198),
- INTC_IRQ(MTU1_AB, 199), INTC_IRQ(MTU1_AB, 200),
- INTC_IRQ(MTU1_VU, 201), INTC_IRQ(MTU1_VU, 202),
- INTC_IRQ(MTU2_AB, 203), INTC_IRQ(MTU2_AB, 204),
- INTC_IRQ(MTU2_VU, 205), INTC_IRQ(MTU2_VU, 206),
- INTC_IRQ(MTU3_ABCD, 207), INTC_IRQ(MTU3_ABCD, 208),
- INTC_IRQ(MTU3_ABCD, 209), INTC_IRQ(MTU3_ABCD, 210),
- INTC_IRQ(MTU3_TCI3V, 211),
- INTC_IRQ(MTU4_ABCD, 212), INTC_IRQ(MTU4_ABCD, 213),
- INTC_IRQ(MTU4_ABCD, 214), INTC_IRQ(MTU4_ABCD, 215),
- INTC_IRQ(MTU4_TCI4V, 216),
-
- INTC_IRQ(PWMT1, 217), INTC_IRQ(PWMT2, 218),
-
- INTC_IRQ(ADC_ADI, 223),
-
- INTC_IRQ(SSIF0, 224), INTC_IRQ(SSIF0, 225),
- INTC_IRQ(SSIF0, 226),
- INTC_IRQ(SSII1, 227), INTC_IRQ(SSII1, 228),
- INTC_IRQ(SSII2, 229), INTC_IRQ(SSII2, 230),
- INTC_IRQ(SSII3, 231), INTC_IRQ(SSII3, 232),
- INTC_IRQ(SSII4, 233), INTC_IRQ(SSII4, 234),
- INTC_IRQ(SSII5, 235), INTC_IRQ(SSII5, 236),
-
- INTC_IRQ(RSPDIF, 237),
-
- INTC_IRQ(IIC30, 238), INTC_IRQ(IIC30, 239),
- INTC_IRQ(IIC30, 240), INTC_IRQ(IIC30, 241),
- INTC_IRQ(IIC30, 242),
- INTC_IRQ(IIC31, 243), INTC_IRQ(IIC31, 244),
- INTC_IRQ(IIC31, 245), INTC_IRQ(IIC31, 246),
- INTC_IRQ(IIC31, 247),
- INTC_IRQ(IIC32, 248), INTC_IRQ(IIC32, 249),
- INTC_IRQ(IIC32, 250), INTC_IRQ(IIC32, 251),
- INTC_IRQ(IIC32, 252),
- INTC_IRQ(IIC33, 253), INTC_IRQ(IIC33, 254),
- INTC_IRQ(IIC33, 255), INTC_IRQ(IIC33, 256),
- INTC_IRQ(IIC33, 257),
-
- INTC_IRQ(SCIF0_BRI, 258), INTC_IRQ(SCIF0_ERI, 259),
- INTC_IRQ(SCIF0_RXI, 260), INTC_IRQ(SCIF0_TXI, 261),
- INTC_IRQ(SCIF1_BRI, 262), INTC_IRQ(SCIF1_ERI, 263),
- INTC_IRQ(SCIF1_RXI, 264), INTC_IRQ(SCIF1_TXI, 265),
- INTC_IRQ(SCIF2_BRI, 266), INTC_IRQ(SCIF2_ERI, 267),
- INTC_IRQ(SCIF2_RXI, 268), INTC_IRQ(SCIF2_TXI, 269),
- INTC_IRQ(SCIF3_BRI, 270), INTC_IRQ(SCIF3_ERI, 271),
- INTC_IRQ(SCIF3_RXI, 272), INTC_IRQ(SCIF3_TXI, 273),
- INTC_IRQ(SCIF4_BRI, 274), INTC_IRQ(SCIF4_ERI, 275),
- INTC_IRQ(SCIF4_RXI, 276), INTC_IRQ(SCIF4_TXI, 277),
- INTC_IRQ(SCIF5_BRI, 278), INTC_IRQ(SCIF5_ERI, 279),
- INTC_IRQ(SCIF5_RXI, 280), INTC_IRQ(SCIF5_TXI, 281),
- INTC_IRQ(SCIF6_BRI, 282), INTC_IRQ(SCIF6_ERI, 283),
- INTC_IRQ(SCIF6_RXI, 284), INTC_IRQ(SCIF6_TXI, 285),
- INTC_IRQ(SCIF7_BRI, 286), INTC_IRQ(SCIF7_ERI, 287),
- INTC_IRQ(SCIF7_RXI, 288), INTC_IRQ(SCIF7_TXI, 289),
-
- INTC_IRQ(RCAN0, 291), INTC_IRQ(RCAN0, 292),
- INTC_IRQ(RCAN0, 293), INTC_IRQ(RCAN0, 294),
- INTC_IRQ(RCAN0, 295),
- INTC_IRQ(RCAN1, 296), INTC_IRQ(RCAN1, 297),
- INTC_IRQ(RCAN1, 298), INTC_IRQ(RCAN1, 299),
- INTC_IRQ(RCAN1, 300),
- INTC_IRQ(RCAN2, 301), INTC_IRQ(RCAN2, 302),
- INTC_IRQ(RCAN2, 303), INTC_IRQ(RCAN2, 304),
- INTC_IRQ(RCAN2, 305),
-
- INTC_IRQ(RSPIC0, 306), INTC_IRQ(RSPIC0, 307),
- INTC_IRQ(RSPIC0, 308),
- INTC_IRQ(RSPIC1, 309), INTC_IRQ(RSPIC1, 310),
- INTC_IRQ(RSPIC1, 311),
-
- INTC_IRQ(IEBC, 318),
-
- INTC_IRQ(CD_ROMD, 319), INTC_IRQ(CD_ROMD, 320),
- INTC_IRQ(CD_ROMD, 321), INTC_IRQ(CD_ROMD, 322),
- INTC_IRQ(CD_ROMD, 323), INTC_IRQ(CD_ROMD, 324),
-
- INTC_IRQ(NFMC, 325), INTC_IRQ(NFMC, 326),
- INTC_IRQ(NFMC, 327), INTC_IRQ(NFMC, 328),
-
- INTC_IRQ(SDHI0, 332), INTC_IRQ(SDHI0, 333),
- INTC_IRQ(SDHI0, 334),
- INTC_IRQ(SDHI1, 335), INTC_IRQ(SDHI1, 336),
- INTC_IRQ(SDHI1, 337),
-
- INTC_IRQ(RTC, 338), INTC_IRQ(RTC, 339),
- INTC_IRQ(RTC, 340),
-
- INTC_IRQ(SRCC0, 341), INTC_IRQ(SRCC0, 342),
- INTC_IRQ(SRCC0, 343), INTC_IRQ(SRCC0, 344),
- INTC_IRQ(SRCC0, 345),
- INTC_IRQ(SRCC1, 346), INTC_IRQ(SRCC1, 347),
- INTC_IRQ(SRCC1, 348), INTC_IRQ(SRCC1, 349),
- INTC_IRQ(SRCC1, 350),
- INTC_IRQ(SRCC2, 351), INTC_IRQ(SRCC2, 352),
- INTC_IRQ(SRCC2, 353), INTC_IRQ(SRCC2, 354),
- INTC_IRQ(SRCC2, 355),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC4, VDC4, VDC4 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { 0, 0, 0, 0 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { 0, 0, 0, 0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { ADC_ADI, SSIF0, SSII1, SSII2 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SSII3, SSII4, SSII5, RSPDIF} },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { IIC30, IIC31, IIC32, IIC33 } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { 0, RCAN0, RCAN1, RCAN2 } },
- { 0xfffe0c22, 0, 16, 4, /* IPR23 */ { RSPIC0, RSPIC1, 0, 0 } },
- { 0xfffe0c24, 0, 16, 4, /* IPR24 */ { IEBC, CD_ROMD, NFMC, 0 } },
- { 0xfffe0c26, 0, 16, 4, /* IPR25 */ { SDHI0, SDHI1, RTC, 0 } },
- { 0xfffe0c28, 0, 16, 4, /* IPR26 */ { SRCC0, SRCC1, SRCC2, 0 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7269", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xe8007000, 0x100),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(260),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(258),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xe8007800, 0x100),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(264),
- DEFINE_RES_IRQ(265),
- DEFINE_RES_IRQ(262),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xe8008000, 0x100),
- DEFINE_RES_IRQ(267),
- DEFINE_RES_IRQ(268),
- DEFINE_RES_IRQ(269),
- DEFINE_RES_IRQ(266),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xe8008800, 0x100),
- DEFINE_RES_IRQ(271),
- DEFINE_RES_IRQ(272),
- DEFINE_RES_IRQ(273),
- DEFINE_RES_IRQ(270),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xe8009000, 0x100),
- DEFINE_RES_IRQ(275),
- DEFINE_RES_IRQ(276),
- DEFINE_RES_IRQ(277),
- DEFINE_RES_IRQ(274),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xe8009800, 0x100),
- DEFINE_RES_IRQ(279),
- DEFINE_RES_IRQ(280),
- DEFINE_RES_IRQ(281),
- DEFINE_RES_IRQ(278),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xe800a000, 0x100),
- DEFINE_RES_IRQ(283),
- DEFINE_RES_IRQ(284),
- DEFINE_RES_IRQ(285),
- DEFINE_RES_IRQ(282),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xe800a800, 0x100),
- DEFINE_RES_IRQ(287),
- DEFINE_RES_IRQ(288),
- DEFINE_RES_IRQ(289),
- DEFINE_RES_IRQ(286),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(188),
- DEFINE_RES_IRQ(189),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(192, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(203, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 338,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xe8010000,
- .end = 0xe80100e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7269_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7269_devices_setup(void)
-{
- return platform_add_devices(sh7269_devices,
- ARRAY_SIZE(sh7269_devices));
-}
-arch_initcall(sh7269_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7269_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7269_early_devices,
- ARRAY_SIZE(sh7269_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
deleted file mode 100644
index 1dcb43d93c8632..00000000000000
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-3 backends.
-#
-
-obj-y := ex.o probe.o entry.o setup-sh3.o
-
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o serial-sh7720.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o serial-sh7720.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SH3) := clock-sh3.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7720) := pinmux-sh7720.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
deleted file mode 100644
index d7765728cadf5a..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh3.c
- *
- * Generic SH-3 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh3_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh3_clk_ops[] = {
- &sh3_master_clk_ops,
- &sh3_module_clk_ops,
- &sh3_bus_clk_ops,
- &sh3_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh3_clk_ops))
- *ops = sh3_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
deleted file mode 100644
index 4947114af0901b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7705.c
- *
- * SH7705 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-/*
- * SH7705 uses the same divisors as the generic SH-3 case, it's just the
- * FRQCR layout that is a bit different..
- */
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7705_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readw(FRQCR) & 0x0003;
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7705_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7705_clk_ops[] = {
- &sh7705_master_clk_ops,
- &sh7705_module_clk_ops,
- &sh7705_bus_clk_ops,
- &sh7705_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7705_clk_ops))
- *ops = sh7705_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
deleted file mode 100644
index 17855022c118f5..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7706.c
- *
- * SH7706 support for the clock framework
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7706_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7706_clk_ops[] = {
- &sh7706_master_clk_ops,
- &sh7706_module_clk_ops,
- &sh7706_bus_clk_ops,
- &sh7706_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7706_clk_ops))
- *ops = sh7706_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
deleted file mode 100644
index 54701bbf7caae7..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7709.c
- *
- * SH7709 support for the clock framework
- *
- * Copyright (C) 2005 Andriy Skulysh
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0080) ?
- ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
-
- return clk->parent->rate * stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7709_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7709_clk_ops[] = {
- &sh7709_master_clk_ops,
- &sh7709_module_clk_ops,
- &sh7709_bus_clk_ops,
- &sh7709_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7709_clk_ops))
- *ops = sh7709_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
deleted file mode 100644
index e60d0bc19cbe96..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7710.c
- *
- * SH7710 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh7710_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7710_clk_ops[] = {
- &sh7710_master_clk_ops,
- &sh7710_module_clk_ops,
- &sh7710_bus_clk_ops,
- &sh7710_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7710_clk_ops))
- *ops = sh7710_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
deleted file mode 100644
index 5af553f38d3a59..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7712.c
- *
- * SH7712 support for the clock framework
- *
- * Copyright (C) 2007 Andrew Murray <amurray@mpc-data.co.uk>
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int multipliers[] = { 1, 2, 3 };
-static int divisors[] = { 1, 2, 3, 4, 6 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0300) >> 8;
-
- clk->rate *= multipliers[idx];
-}
-
-static struct sh_clk_ops sh7712_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = frqcr & 0x0007;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0030) >> 4;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7712_clk_ops[] = {
- &sh7712_master_clk_ops,
- &sh7712_module_clk_ops,
- &sh7712_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7712_clk_ops))
- *ops = sh7712_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
deleted file mode 100644
index e48b3dd996f58d..00000000000000
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ /dev/null
@@ -1,509 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/entry.S
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <cpu/mmu_context.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+8)
-OFF_TRA = (16*4+6*4)
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-#define g_imask r6 /* r6_bank1 */
-#define k_g_imask r6_bank /* r6_bank1 */
-#define current r7 /* r7_bank1 */
-
-#include <asm/entry-macros.S>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * k2 scratch (Exception code)
- * k3 scratch (Return address)
- * k4 scratch
- * k5 reserved
- * k6 Global Interrupt Mask (0--15 << 4)
- * k7 CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-!
-! TLB Miss / Initial Page write exception handling
-! _and_
-! TLB hits, but the access violate the protection.
-! It can be valid access, such as stack grow and/or C-O-W.
-!
-!
-! Find the pmd/pte entry and loadtlb
-! If it's not found, cause address error (SEGV)
-!
-! Although this could be written in assembly language (and it'd be faster),
-! this first version depends *much* on C implementation.
-!
-
-#if defined(CONFIG_MMU)
- .align 2
-ENTRY(tlb_miss_load)
- bra call_handle_tlbmiss
- mov #0, r5
-
- .align 2
-ENTRY(tlb_miss_store)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_WRITE, r5
-
- .align 2
-ENTRY(initial_page_write)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_INITIAL, r5
-
- .align 2
-ENTRY(tlb_protection_violation_load)
- bra call_do_page_fault
- mov #FAULT_CODE_PROT, r5
-
- .align 2
-ENTRY(tlb_protection_violation_store)
- bra call_do_page_fault
- mov #(FAULT_CODE_PROT | FAULT_CODE_WRITE), r5
-
-call_handle_tlbmiss:
- mov.l 1f, r0
- mov r5, r8
- mov.l @r0, r6
- mov.l 2f, r0
- sts pr, r10
- jsr @r0
- mov r15, r4
- !
- tst r0, r0
- bf/s 0f
- lds r10, pr
- rts
- nop
-0:
- mov r8, r5
-call_do_page_fault:
- mov.l 1f, r0
- mov.l @r0, r6
-
- mov.l 3f, r0
- mov.l 4f, r1
- mov r15, r4
- jmp @r0
- lds r1, pr
-
- .align 2
-1: .long MMU_TEA
-2: .long handle_tlbmiss
-3: .long do_page_fault
-4: .long ret_from_exception
-
- .align 2
-ENTRY(address_error_load)
- bra call_dae
- mov #0,r5 ! writeaccess = 0
-
- .align 2
-ENTRY(address_error_store)
- bra call_dae
- mov #1,r5 ! writeaccess = 1
-
- .align 2
-call_dae:
- mov.l 1f, r0
- mov.l @r0, r6 ! address
- mov.l 2f, r0
- jmp @r0
- mov r15, r4 ! regs
-
- .align 2
-1: .long MMU_TEA
-2: .long do_address_error
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov.l 1f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- mov k4, r15
- !
- mov.l 2f, k0
- mov.l @k0, k0
- jmp @k0
- ldc k3, ssr
- .align 2
-1: .long 0x300000f0
-2: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-! restore_regs()
-! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
-! - switch bank
-! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
-! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
-! k2 returns original pr
-! k3 returns original sr
-! k4 returns original stack pointer
-! r8 passes SR bitmask, overwritten with restored data on return
-! r9 trashed
-! BL=0 on entry, on exit BL=1 (depending on r8).
-
-ENTRY(restore_regs)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- !
- stc sr, r9
- or r8, r9
- ldc r9, sr
- !
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, k4 ! original stack pointer
- ldc.l @r15+, spc
- mov.l @r15+, k2 ! original PR
- mov.l @r15+, k3 ! original SR
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
- rts
- add #4, r15 ! Skip syscall number
-
-restore_all:
- mov.l 7f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- !
- ! Calculate new SR value
- mov k3, k2 ! original SR value
- mov #0xfffffff0, k1
- extu.b k1, k1
- not k1, k1
- and k1, k2 ! Mask original SR value
- !
- mov k3, k0 ! Calculate IMASK-bits
- shlr2 k0
- and #0x3c, k0
- cmp/eq #0x3c, k0
- bt/s 6f
- shll2 k0
- mov g_imask, k0
- !
-6: or k0, k2 ! Set the IMASK-bits
- ldc k2, ssr
- !
- mov k4, r15
- rte
- nop
-
- .align 2
-5: .long 0x00001000 ! DSP
-7: .long 0x30000000
-
-! common exception handler
-#include "../../entry-common.S"
-
-! Exception Vector Base
-!
-! Should be aligned page boundary.
-!
- .balign 4096,0,4096
-ENTRY(vbr_base)
- .long 0
-!
-! 0x100: General exception vector
-!
- .balign 256,0,256
-general_exception:
- bra handle_exception
- sts pr, k3 ! save original pr value in k3
-
-! prepare_stack()
-! - roll back gRB
-! - switch to kernel stack
-! k0 returns original sp (after roll back)
-! k1 trashed
-! k2 trashed
-
-prepare_stack:
-#ifdef CONFIG_GUSA
- ! Check for roll back gRB (User and Kernel)
- mov r15, k0
- shll k0
- bf/s 1f
- shll k0
- bf/s 1f
- stc spc, k1
- stc r0_bank, k0
- cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0)
- bt/s 2f
- stc r1_bank, k1
-
- add #-2, k0
- add r15, k0
- ldc k0, spc ! PC = saved r0 + r15 - 2
-2: mov k1, r15 ! SP = r1
-1:
-#endif
- ! Switch to kernel stack if needed
- stc ssr, k0 ! Is it from kernel space?
- shll k0 ! Check MD bit (bit30) by shifting it into...
- shll k0 ! ...the T bit
- bt/s 1f ! It's a kernel to kernel transition.
- mov r15, k0 ! save original stack to k0
- /* User space to kernel */
- mov #(THREAD_SIZE >> 10), k1
- shll8 k1 ! k1 := THREAD_SIZE
- shll2 k1
- add current, k1
- mov k1, r15 ! change to kernel stack
- !
-1:
- rts
- nop
-
-!
-! 0x400: Instruction and Data TLB miss exception vector
-!
- .balign 1024,0,1024
-tlb_miss:
- sts pr, k3 ! save original pr value in k3
-
-handle_exception:
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 5f, k2 ! vector register address
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov.l @k2, k2 ! read out vector and keep in k2
-
-handle_exception_special:
- setup_frame_reg
-
- ! Setup return address and jump to exception handler
- mov.l 7f, r9 ! fetch return address
- stc r2_bank, r0 ! k2 (vector)
- mov.l 6f, r10
- shlr2 r0
- shlr r0
- mov.l @(r0, r10), r10
- jmp @r10
- lds r9, pr ! put return address in pr
-
- .align L1_CACHE_SHIFT
-
-! save_regs()
-! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
-! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
-! - switch bank
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k0 contains original stack pointer*
-! k1 trashed
-! k3 passes original pr*
-! k4 passes SR bitmask
-! BL=1 on entry, on exit BL=0.
-
-ENTRY(save_regs)
- mov #-1, r1
- mov.l k1, @-r15 ! set TRA (default: -1)
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- mov.l k3, @-r15 ! original pr in k3
- stc.l spc, @-r15
-
- mov.l k0, @-r15 ! original stack pointer in k0
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- mov.l 0f, k3 ! SR bits to set in k3
-
- ! fall-through
-
-! save_low_regs()
-! - modify SR for bank switch
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k3 passes bits to set in SR
-! k4 passes bits to clear in SR
-
-ENTRY(save_low_regs)
- stc sr, r8
- or k3, r8
- and k4, r8
- ldc r8, sr
-
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
-!
-! 0x600: Interrupt / NMI vector
-!
- .balign 512,0,512
-ENTRY(handle_interrupt)
- sts pr, k3 ! save original pr value in k3
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov #-1, k2 ! default vector kept in k2
-
- setup_frame_reg
-
- stc sr, r0 ! get status register
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bf 9f
- TRACE_IRQS_OFF
-9:
-
- ! Setup return address and jump to do_IRQ
- mov.l 4f, r9 ! fetch return address
- lds r9, pr ! put return address in pr
- mov.l 2f, r4
- mov.l 3f, r9
- mov.l @r4, r4 ! pass INTEVT vector as arg0
-
- shlr2 r4
- shlr r4
- mov r4, r0 ! save vector->jmp table offset for later
-
- shlr2 r4 ! vector to IRQ# conversion
- add #-0x10, r4
-
- cmp/pz r4 ! is it a valid IRQ?
- bt 10f
-
- /*
- * We got here as a result of taking the INTEVT path for something
- * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
- * path and special case the event dispatch instead. This is the
- * expected path for the NMI (and any other brilliantly implemented
- * exception), which effectively wants regular exception dispatch
- * but is unfortunately reported through INTEVT rather than
- * EXPEVT. Grr.
- */
- mov.l 6f, r9
- mov.l @(r0, r9), r9
- jmp @r9
- mov r15, r8 ! trap handlers take saved regs in r8
-
-10:
- jmp @r9 ! Off to do_IRQ() we go.
- mov r15, r5 ! pass saved registers as arg1
-
-ENTRY(exception_none)
- rts
- nop
-
- .align L1_CACHE_SHIFT
-exception_data:
-0: .long 0x000080f0 ! FD=1, IMASK=15
-1: .long 0xcfffffff ! RB=0, BL=0
-2: .long INTEVT
-3: .long do_IRQ
-4: .long ret_from_irq
-5: .long EXPEVT
-6: .long exception_handling_table
-7: .long ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
deleted file mode 100644
index ee2113f4215cb3..00000000000000
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/ex.S
- *
- * The SH-3 and SH-4 exception vector table.
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_MMU)
-#define tlb_miss_load exception_error
-#define tlb_miss_store exception_error
-#define initial_page_write exception_error
-#define tlb_protection_violation_load exception_error
-#define tlb_protection_violation_store exception_error
-#define address_error_load exception_error
-#define address_error_store exception_error
-#endif
-
-#if !defined(CONFIG_SH_FPU)
-#define fpu_error_trap_handler exception_error
-#endif
-
-#if !defined(CONFIG_KGDB)
-#define kgdb_handle_exception exception_error
-#endif
-
- .align 2
- .data
-
-ENTRY(exception_handling_table)
- .long exception_error /* 000 */
- .long exception_error
- .long tlb_miss_load /* 040 */
- .long tlb_miss_store
- .long initial_page_write
- .long tlb_protection_violation_load
- .long tlb_protection_violation_store
- .long address_error_load
- .long address_error_store /* 100 */
- .long fpu_error_trap_handler /* 120 */
- .long exception_error /* 140 */
- .long system_call ! Unconditional Trap /* 160 */
- .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */
- .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
- .long nmi_trap_handler /* 1C0 */ ! Allow trap to debugger
- .long breakpoint_trap_handler /* 1E0 */
-
- /*
- * Pad the remainder of the table out, exceptions residing in far
- * away offsets can be manually inserted in to their appropriate
- * location via set_exception_table_{evt,vec}().
- */
- .balign 4096,0,4096
diff --git a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c b/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
deleted file mode 100644
index 34015e608ee931..00000000000000
--- a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7720_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7720", sh7720_pfc_resources,
- ARRAY_SIZE(sh7720_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
deleted file mode 100644
index 5e7ad591ab1651..00000000000000
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/probe.c
- *
- * CPU Subtype Probing for SH-3.
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-void cpu_probe(void)
-{
- unsigned long addr0, addr1, data0, data1, data2, data3;
-
- jump_to_uncached();
- /*
- * Check if the entry shadows or not.
- * When shadowed, it's 128-entry system.
- * Otherwise, it's 256-entry system.
- */
- addr0 = CACHE_OC_ADDRESS_ARRAY + (3 << 12);
- addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
-
- /* First, write back & invalidate */
- data0 = __raw_readl(addr0);
- __raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
- data1 = __raw_readl(addr1);
- __raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
-
- /* Next, check if there's shadow or not */
- data0 = __raw_readl(addr0);
- data0 ^= SH_CACHE_VALID;
- __raw_writel(data0, addr0);
- data1 = __raw_readl(addr1);
- data2 = data1 ^ SH_CACHE_VALID;
- __raw_writel(data2, addr1);
- data3 = __raw_readl(addr0);
-
- /* Lastly, invaliate them. */
- __raw_writel(data0&~SH_CACHE_VALID, addr0);
- __raw_writel(data2&~SH_CACHE_VALID, addr1);
-
- back_to_cached();
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * 7709A/7729 has 16K cache (256-entry), while 7702 has only
- * 2K(direct) 7702 is not supported (yet)
- */
- if (data0 == data1 && data2 == data3) { /* Shadow */
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.entry_mask = 0x7f0;
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.type = CPU_SH7708;
-
- boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
- } else { /* 7709A or 7729 */
- boot_cpu_data.dcache.way_incr = (1 << 12);
- boot_cpu_data.dcache.entry_mask = 0xff0;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.type = CPU_SH7729;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7706)
- boot_cpu_data.type = CPU_SH7706;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
- boot_cpu_data.type = CPU_SH7710;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7712)
- boot_cpu_data.type = CPU_SH7712;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- boot_cpu_data.type = CPU_SH7720;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7721)
- boot_cpu_data.type = CPU_SH7721;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- boot_cpu_data.type = CPU_SH7705;
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
- boot_cpu_data.dcache.way_incr = (1 << 13);
- boot_cpu_data.dcache.entry_mask = 0x1ff0;
- boot_cpu_data.dcache.sets = 512;
- __raw_writel(CCR_CACHE_32KB, CCR3_REG);
-#else
- __raw_writel(CCR_CACHE_16KB, CCR3_REG);
-#endif
-#endif
- }
-
- /*
- * SH-3 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
- boot_cpu_data.icache = boot_cpu_data.dcache;
-
- boot_cpu_data.family = CPU_FAMILY_SH3;
-}
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/arch/sh/kernel/cpu/sh3/serial-sh770x.c
deleted file mode 100644
index dec027f233f22e..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh770x.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define SCPCR 0xA4000116
-#define SCPDR 0xA4000136
-
-static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- __raw_writew(data & 0x0fcf, SCPCR);
-
- if (!(cflag & CRTSCTS)) {
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP4MD1,0,
- Set SCP6MD1,0 = {01} (output) */
- __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
-
- data = __raw_readb(SCPDR);
- /* Set /RTS2 (bit6) = 0 */
- __raw_writeb(data & 0xbf, SCPDR);
- }
-}
-
-struct plat_sci_port_ops sh770x_sci_port_ops = {
- .init_pins = sh770x_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/arch/sh/kernel/cpu/sh3/serial-sh7710.c
deleted file mode 100644
index ee04052e5bdde2..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7710.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define PACR 0xa4050100
-#define PBCR 0xa4050102
-
-static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- if (port->mapbase == 0xA4400000) {
- __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
- __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
- } else if (port->mapbase == 0xA4410000)
- __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
-}
-
-struct plat_sci_port_ops sh7710_sci_port_ops = {
- .init_pins = sh7710_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
deleted file mode 100644
index 75aaea49de4317..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-#include <cpu/gpio.h>
-
-static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (cflag & CRTSCTS) {
- /* enable RTS/CTS */
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xfc03), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 9-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xfc03), PORT_PVCR);
- }
- } else {
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 5-2; enable only tx and rx */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xffc3), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 5-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xffc3), PORT_PVCR);
- }
- }
-}
-
-struct plat_sci_port_ops sh7720_sci_port_ops = {
- .init_pins = sh7720_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
deleted file mode 100644
index cf2a3f09fee443..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared SH3 Setup code
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-};
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static struct intc_vect vectors_irq45[] __initdata = {
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4000004, 0, 8, /* IRR0 */
- { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
- vectors_irq0123, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
- vectors_irq45, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR1_IRQLVL (1<<14)
-
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
- __raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
- register_intc_controller(&intc_desc_irq0123);
- return;
- }
- BUG();
-}
-
-void __init plat_irq_setup_sh3(void)
-{
- register_intc_controller(&intc_desc_irq45);
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
deleted file mode 100644
index 0544134b3f20c6..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7705 Setup
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
-
- DMAC, SCIF0, SCIF2, ADC_ADI, USB,
-
- TPU0, TPU1, TPU2, TPU3,
- TMU0, TMU1, TMU2,
-
- RTC, WDT, REF_RCMI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x960),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
- INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
- INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } },
-
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7705_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7705_devices_setup(void)
-{
- return platform_add_devices(sh7705_devices,
- ARRAY_SIZE(sh7705_devices));
-}
-arch_initcall(sh7705_devices_setup);
-
-static struct platform_device *sh7705_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7705_early_devices,
- ARRAY_SIZE(sh7705_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
deleted file mode 100644
index 4947f57748bc12..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on setup-sh7709.c
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
- DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
- LCDC, PCC0, PCC1,
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
- INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
- INTC_VECT(REF, 0x5a0),
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- INTC_VECT(LCDC, 0x9a0),
- INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0),
-#endif
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } },
-#endif
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCI,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffffe80, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH3_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4000150, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif2_platform_data = {
- .type = PORT_IRDA,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xa4000140, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-#endif
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh770x_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh770x_devices_setup(void)
-{
- return platform_add_devices(sh770x_devices,
- ARRAY_SIZE(sh770x_devices));
-}
-arch_initcall(sh770x_devices_setup);
-
-static struct platform_device *sh770x_early_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh770x_early_devices,
- ARRAY_SIZE(sh770x_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- plat_irq_setup_sh3();
-#endif
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
deleted file mode 100644
index 3819107615794b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7710, SH7712
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
- EDMAC0, EDMAC1, EDMAC2,
- SIOF0, SIOF1,
-
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
- INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
-#ifdef CONFIG_CPU_SUBTYPE_SH7710
- INTC_VECT(IPSEC, 0xbe0),
-#endif
- INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
- INTC_VECT(EDMAC2, 0xc40),
- INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
- INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
- INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
- INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
- { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7710_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7710_devices_setup(void)
-{
- return platform_add_devices(sh7710_devices,
- ARRAY_SIZE(sh7710_devices));
-}
-arch_initcall(sh7710_devices_setup);
-
-static struct platform_device *sh7710_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7710_early_devices,
- ARRAY_SIZE(sh7710_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
deleted file mode 100644
index 425d067dae9baf..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup code for SH7720, SH7721.
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-#include <cpu/serial.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x28 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4430000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4438000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xA4428000,
- .end = 0xA44280FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa60),
- .end = evt2irq(0xa60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "sh_udc",
- .start = 0xA4420000,
- .end = 0xA44200FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "sh_udc",
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x1f,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x60),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7720_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7720_devices_setup(void)
-{
- return platform_add_devices(sh7720_devices,
- ARRAY_SIZE(sh7720_devices));
-}
-arch_initcall(sh7720_devices_setup);
-
-static struct platform_device *sh7720_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7720_early_devices,
- ARRAY_SIZE(sh7720_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- TMU0, TMU1, TMU2, RTC,
- WDT, REF_RCMI, SIM,
- IRQ0, IRQ1, IRQ2, IRQ3,
- USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
- DMAC1, LCDC, SSL,
- ADC, DMAC2, USBFI, CMT,
- SCIF0, SCIF1,
- PINT07, PINT815, TPU, IIC,
- SIOF0, SIOF1, MMC, PCC,
- USBHI, AFEIF,
- H_UDI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480),
- INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500),
- INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540),
- INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
- /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
- INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800),
- INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840),
- INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900),
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- INTC_VECT(SSL, 0x980),
-#endif
- INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40),
- INTC_VECT(USBHI, 0xa60),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
- INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
- INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
- INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
- INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80),
- INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0),
- INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00),
- INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0),
- INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
- INTC_VECT(AFEIF, 0xfe0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
- { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
- { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
- { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
- { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
- { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
- { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
- { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S
deleted file mode 100644
index dc111c4ccf2199..00000000000000
--- a/arch/sh/kernel/cpu/sh3/swsusp.S
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/swsusp.S
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-! swsusp_arch_resume()
-! - copy restore_pblist pages
-! - restore registers from swsusp_arch_regs_cpu0
-
-ENTRY(swsusp_arch_resume)
- mov.l 1f, r15
- mov.l 2f, r4
- mov.l @r4, r4
-
-swsusp_copy_loop:
- mov r4, r0
- cmp/eq #0, r0
- bt swsusp_restore_regs
-
- mov.l @(PBE_ADDRESS, r4), r2
- mov.l @(PBE_ORIG_ADDRESS, r4), r5
-
- mov #(PAGE_SIZE >> 10), r3
- shll8 r3
- shlr2 r3 /* PAGE_SIZE / 16 */
-swsusp_copy_page:
- dt r3
- mov.l @r2+,r1 /* 16n+0 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+4 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+8 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+12 */
- mov.l r1,@r5
- bf/s swsusp_copy_page
- add #4,r5
-
- bra swsusp_copy_loop
- mov.l @(PBE_NEXT, r4), r4
-
-swsusp_restore_regs:
- ! BL=0: R7->R0 is bank0
- mov.l 3f, r8
- mov.l 4f, r5
- jsr @r5
- nop
-
- ! BL=1: R7->R0 is bank1
- lds k2, pr
- ldc k3, ssr
-
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- rte
- nop
- ! BL=0: R7->R0 is bank0
-
- .align 2
-1: .long swsusp_arch_regs_cpu0
-2: .long restore_pblist
-3: .long 0x20000000 ! RB=1
-4: .long restore_regs
-
-! swsusp_arch_suspend()
-! - prepare pc for resume, return from function without swsusp_save on resume
-! - save registers in swsusp_arch_regs_cpu0
-! - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
- sts pr, r0 ! save pr in r0
- mov r15, r2 ! save sp in r2
- mov r8, r5 ! save r8 in r5
- stc sr, r1
- ldc r1, ssr ! save sr in ssr
- mov.l 1f, r1
- ldc r1, spc ! setup pc value for resuming
- mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
- mov.l 6f, r3
- add r3, r15 ! save from top of structure
-
- ! BL=0: R7->R0 is bank0
- mov.l 2f, r3 ! get new SR value for bank1
- mov #0, r4
- mov.l 7f, r1
- jsr @r1 ! switch to bank1 and save bank1 r7->r0
- not r4, r4
-
- ! BL=1: R7->R0 is bank1
- stc r2_bank, k0 ! fetch old sp from r2_bank0
- mov.l 3f, k4 ! SR bits to clear in k4
- mov.l 8f, k1
- jsr @k1 ! switch to bank0 and save all regs
- stc r0_bank, k3 ! fetch old pr from r0_bank0
-
- ! BL=0: R7->R0 is bank0
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- stc ssr, r1
- ldc r1, sr ! restore old sr
- lds r0, pr ! restore old pr
- mov.l 4f, r0
- jmp @r0
- nop
-
-swsusp_call_save:
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- lds r0, pr ! restore old pr
- rts
- mov #0, r0
-
- .align 2
-1: .long swsusp_call_save
-2: .long 0x20000000 ! RB=1
-3: .long 0xdfffffff ! RB=0
-4: .long swsusp_save
-5: .long swsusp_arch_regs_cpu0
-6: .long SWSUSP_ARCH_REGS_SIZE
-7: .long save_low_regs
-8: .long save_regs
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
deleted file mode 100644
index 00c16331e07e5b..00000000000000
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-obj-y := probe.o common.o
-common-y += $(addprefix ../sh3/, entry.o ex.o)
-
-obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
-obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
-obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
-
-# Perf events
-perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
-
-# Primary on-chip clocks (common)
-ifndef CONFIG_CPU_SH4A
-clock-$(CONFIG_CPU_SH4) := clock-sh4.o
-endif
-
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763cb256..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3 0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
- int divisor = clk->parent->rate / rate;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
- if (frqcr3_divisors[i] == divisor)
- return frqcr3_values[i];
-
- /* Safe fallback */
- return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
- .recalc = emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
- .recalc = femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
- int i;
-
- /*
- * For some reason, the shoc_clk seems to be set to some really
- * insane value at boot (values outside of the allowable frequency
- * range for instance). We deal with this by scaling it back down
- * to something sensible just in case.
- *
- * Start scaling from the high end down until we find something
- * that passes rate verification..
- */
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
- int divisor = frqcr3_divisors[i];
-
- if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
- break;
- }
-
- WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *bclk = clk_get(NULL, "bus_clk");
- unsigned long bclk_rate = clk_get_rate(bclk);
-
- clk_put(bclk);
-
- if (rate > bclk_rate)
- return 1;
- if (rate > 66000000)
- return 1;
-
- return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long frqcr3;
- unsigned int tmp;
-
- /* Make sure we have something sensible to switch to */
- if (shoc_clk_verify_rate(clk, rate) != 0)
- return -EINVAL;
-
- tmp = frqcr3_lookup(clk, rate);
-
- frqcr3 = __raw_readl(CPG2_FRQCR3);
- frqcr3 &= ~(0x0007 << 6);
- frqcr3 |= tmp << 6;
- __raw_writel(frqcr3, CPG2_FRQCR3);
-
- clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
- return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
- .init = shoc_clk_init,
- .recalc = shoc_clk_recalc,
- .set_rate = shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
- &sh4202_emi_clk,
- &sh4202_femi_clk,
- &sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
- CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
- CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
- struct clk *clkp = sh4202_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
deleted file mode 100644
index ee3c5537a9d81a..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4.c
- *
- * Generic SH-4 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-#define bfc_divisors ifc_divisors /* Same */
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh4_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh4_clk_ops[] = {
- &sh4_master_clk_ops,
- &sh4_module_clk_ops,
- &sh4_bus_clk_ops,
- &sh4_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh4_clk_ops))
- *ops = sh4_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
deleted file mode 100644
index 03ffd8cdf54244..00000000000000
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2006 ST Microelectronics Ltd. (denorm support)
- *
- * FIXME! These routines have not been tested for big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/io.h>
-#include <cpu/fpu.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-extern unsigned long long float64_div(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_div(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_mul(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_mul(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_add(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_add(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_sub(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_sub(unsigned long int a, unsigned long int b);
-extern unsigned long int float64_to_float32(unsigned long long a);
-static unsigned int fpu_exception_flags;
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "lds %2, fpscr\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t":"=r" (dummy)
- :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r"(FPSCR_RCHG), "r"(FPSCR_INIT)
- :"memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("lds %2, fpscr\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- :"=r" (dummy)
- :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- :"memory");
- disable_fpu();
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n + 1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *)regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf
- };
-
- if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb))
- regs->pr = regs->pc + 4; /* bsr & jsr */
-
- if (nib[0] == 0xa || nib[0] == 0xb) {
- /* bra & bsr */
- nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) {
- /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) {
- /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (insn == 0x000b) {
- /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else {
- nextpc = regs->pc + instruction_size(insn);
- finsn = insn;
- }
-
- if ((finsn & 0xf1ff) == 0xf0ad) {
- /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
- /* FPU error */
- denormal_to_double(&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) {
- /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- llx = float64_mul(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_mul(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) {
- /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = float64_add(llx, lly);
- else
- llx = float64_sub(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- if ((finsn & 0xf00f) == 0xf000)
- hx = float32_add(hx, hy);
- else
- hx = float32_sub(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf003) == 0xf003) {
- /* fdiv */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- llx = float64_div(llx, lly);
-
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_div(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf0bd) == 0xf0bd) {
- /* fcnvds - double to single precision convert */
- struct task_struct *tsk = current;
- int m;
- unsigned int hx;
-
- m = (finsn >> 8) & 0x7;
- hx = tsk->thread.xstate->hardfpu.fp_regs[m];
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
- && ((hx & 0x7fffffff) < 0x00100000)) {
- /* subnormal double to float conversion */
- long long llx;
-
- llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-void float_raise(unsigned int flags)
-{
- fpu_exception_flags |= flags;
-}
-
-int float_rounding_mode(void)
-{
- struct task_struct *tsk = current;
- int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
- return roundingMode;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- fpu_exception_flags = 0;
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
- /* Set the FPSCR flag as well as cause bits - simply
- * replicate the cause */
- tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
- (fpu_exception_flags >> 2)) == 0) {
- return;
- }
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
deleted file mode 100644
index db5847bb733069..00000000000000
--- a/arch/sh/kernel/cpu/sh4/perf_event.c
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH7750-style performance counters
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PM_CR_BASE 0xff000084 /* 16-bit */
-#define PM_CTR_BASE 0xff100004 /* 32-bit */
-
-#define PMCR(n) (PM_CR_BASE + ((n) * 0x04))
-#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08))
-#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08))
-
-#define PMCR_PMM_MASK 0x0000003f
-
-#define PMCR_CLKF 0x00000100
-#define PMCR_PMCLR 0x00002000
-#define PMCR_PMST 0x00004000
-#define PMCR_PMEN 0x00008000
-
-static struct sh_pmu sh7750_pmu;
-
-/*
- * There are a number of events supported by each counter (33 in total).
- * Since we have 2 counters, each counter will take the event code as it
- * corresponds to the PMCR PMM setting. Each counter can be configured
- * independently.
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x01 Operand read access
- * 0x02 Operand write access
- * 0x03 UTLB miss
- * 0x04 Operand cache read miss
- * 0x05 Operand cache write miss
- * 0x06 Instruction fetch (w/ cache)
- * 0x07 Instruction TLB miss
- * 0x08 Instruction cache miss
- * 0x09 All operand accesses
- * 0x0a All instruction accesses
- * 0x0b OC RAM operand access
- * 0x0d On-chip I/O space access
- * 0x0e Operand access (r/w)
- * 0x0f Operand cache miss (r/w)
- * 0x10 Branch instruction
- * 0x11 Branch taken
- * 0x12 BSR/BSRF/JSR
- * 0x13 Instruction execution
- * 0x14 Instruction execution in parallel
- * 0x15 FPU Instruction execution
- * 0x16 Interrupt
- * 0x17 NMI
- * 0x18 trapa instruction execution
- * 0x19 UBCA match
- * 0x1a UBCB match
- * 0x21 Instruction cache fill
- * 0x22 Operand cache fill
- * 0x23 Elapsed time
- * 0x24 Pipeline freeze by I-cache miss
- * 0x25 Pipeline freeze by D-cache miss
- * 0x27 Pipeline freeze by branch instruction
- * 0x28 Pipeline freeze by CPU register
- * 0x29 Pipeline freeze by FPU
- */
-
-static const int sh7750_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0023,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x000a,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0006, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x0008, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0010,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh7750_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0001,
- [ C(RESULT_MISS) ] = 0x0004,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0002,
- [ C(RESULT_MISS) ] = 0x0005,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0006,
- [ C(RESULT_MISS) ] = 0x0008,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0003,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0007,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh7750_event_map(int event)
-{
- return sh7750_general_events[event];
-}
-
-static u64 sh7750_pmu_read(int idx)
-{
- return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
- __raw_readl(PMCTRL(idx));
-}
-
-static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readw(PMCR(idx));
- tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
- __raw_writew(tmp, PMCR(idx));
-}
-
-static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- __raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
- __raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
-}
-
-static void sh7750_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
-}
-
-static void sh7750_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
-}
-
-static struct sh_pmu sh7750_pmu = {
- .name = "sh7750",
- .num_events = 2,
- .event_map = sh7750_event_map,
- .max_events = ARRAY_SIZE(sh7750_general_events),
- .raw_event_mask = PMCR_PMM_MASK,
- .cache_events = &sh7750_cache_events,
- .read = sh7750_pmu_read,
- .disable = sh7750_pmu_disable,
- .enable = sh7750_pmu_enable,
- .disable_all = sh7750_pmu_disable_all,
- .enable_all = sh7750_pmu_enable_all,
-};
-
-static int __init sh7750_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh7750_pmu);
-}
-early_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
deleted file mode 100644
index ef4dd6295263dd..00000000000000
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ /dev/null
@@ -1,260 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/probe.c
- *
- * CPU Subtype Probing for SH-4.
- *
- * Copyright (C) 2001 - 2007 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- unsigned long pvr, prr, cvr;
- unsigned long size;
-
- static unsigned long sizes[16] = {
- [1] = (1 << 12),
- [2] = (1 << 13),
- [4] = (1 << 14),
- [8] = (1 << 15),
- [9] = (1 << 16)
- };
-
- pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
- prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
- cvr = (__raw_readl(CCN_CVR));
-
- /*
- * Setup some sane SH-4 defaults for the icache
- */
- boot_cpu_data.icache.way_incr = (1 << 13);
- boot_cpu_data.icache.entry_shift = 5;
- boot_cpu_data.icache.sets = 256;
- boot_cpu_data.icache.ways = 1;
- boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
-
- /*
- * And again for the dcache ..
- */
- boot_cpu_data.dcache.way_incr = (1 << 14);
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.sets = 512;
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
-
- /* We don't know the chip cut */
- boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
-
- /*
- * Setup some generic flags we can probe on SH-4A parts
- */
- if (((pvr >> 16) & 0xff) == 0x10) {
- boot_cpu_data.family = CPU_FAMILY_SH4A;
-
- if ((cvr & 0x10000000) == 0) {
- boot_cpu_data.flags |= CPU_HAS_DSP;
- boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
- }
-
- boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
- boot_cpu_data.cut_major = pvr & 0x7f;
-
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- } else {
- /* And some SH-4 defaults.. */
- boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
- boot_cpu_data.family = CPU_FAMILY_SH4;
- }
-
- /* FPU detection works for almost everyone */
- if ((cvr & 0x20000000))
- boot_cpu_data.flags |= CPU_HAS_FPU;
-
- /* Mask off the upper chip ID */
- pvr &= 0xffff;
-
- /*
- * Probe the underlying processor version/revision and
- * adjust cpu_data setup accordingly.
- */
- switch (pvr) {
- case 0x205:
- boot_cpu_data.type = CPU_SH7750;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x206:
- boot_cpu_data.type = CPU_SH7750S;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x1100:
- boot_cpu_data.type = CPU_SH7751;
- break;
- case 0x2001:
- case 0x2004:
- boot_cpu_data.type = CPU_SH7770;
- break;
- case 0x2006:
- case 0x200A:
- if (prr == 0x61)
- boot_cpu_data.type = CPU_SH7781;
- else if (prr == 0xa1)
- boot_cpu_data.type = CPU_SH7763;
- else
- boot_cpu_data.type = CPU_SH7780;
-
- break;
- case 0x3000:
- case 0x3003:
- case 0x3009:
- boot_cpu_data.type = CPU_SH7343;
- break;
- case 0x3004:
- case 0x3007:
- boot_cpu_data.type = CPU_SH7785;
- break;
- case 0x4004:
- case 0x4005:
- boot_cpu_data.type = CPU_SH7786;
- boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
- break;
- case 0x3008:
- switch (prr) {
- case 0x50:
- case 0x51:
- boot_cpu_data.type = CPU_SH7723;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x70:
- boot_cpu_data.type = CPU_SH7366;
- break;
- case 0xa0:
- case 0xa1:
- boot_cpu_data.type = CPU_SH7722;
- break;
- }
- break;
- case 0x300b:
- switch (prr) {
- case 0x20:
- boot_cpu_data.type = CPU_SH7724;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x10:
- case 0x11:
- boot_cpu_data.type = CPU_SH7757;
- break;
- case 0xd0:
- case 0x40: /* yon-ten-go */
- boot_cpu_data.type = CPU_SH7372;
- break;
- case 0xE0: /* 0x4E0 */
- boot_cpu_data.type = CPU_SH7734; /* SH7733/SH7734 */
- break;
-
- }
- break;
- case 0x4000: /* 1st cut */
- case 0x4001: /* 2nd cut */
- boot_cpu_data.type = CPU_SHX3;
- break;
- case 0x700:
- boot_cpu_data.type = CPU_SH4_501;
- boot_cpu_data.flags &= ~CPU_HAS_FPU;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x600:
- boot_cpu_data.type = CPU_SH4_202;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x500 ... 0x501:
- switch (prr) {
- case 0x10:
- boot_cpu_data.type = CPU_SH7750R;
- break;
- case 0x11:
- boot_cpu_data.type = CPU_SH7751R;
- break;
- case 0x50 ... 0x5f:
- boot_cpu_data.type = CPU_SH7760;
- break;
- }
-
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
-
- break;
- }
-
- /*
- * On anything that's not a direct-mapped cache, look to the CVR
- * for I/D-cache specifics.
- */
- if (boot_cpu_data.icache.ways > 1) {
- size = sizes[(cvr >> 20) & 0xf];
- boot_cpu_data.icache.way_incr = (size >> 1);
- boot_cpu_data.icache.sets = (size >> 6);
-
- }
-
- /* And the rest of the D-cache */
- if (boot_cpu_data.dcache.ways > 1) {
- size = sizes[(cvr >> 16) & 0xf];
- boot_cpu_data.dcache.way_incr = (size >> 1);
- boot_cpu_data.dcache.sets = (size >> 6);
- }
-
- /*
- * SH-4A's have an optional PIPT L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- /*
- * Verify that it really has something hooked up, this
- * is the safety net for CPUs that have optional L2
- * support yet do not implement it.
- */
- if ((cvr & 0xf) == 0)
- boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
- else {
- /*
- * Silicon and specifications have clearly never
- * met..
- */
- cvr ^= 0xf;
-
- /*
- * Size calculation is much more sensible
- * than it is for the L1.
- *
- * Sizes are 128KB, 256KB, 512KB, and 1MB.
- */
- size = (cvr & 0xf) << 17;
-
- boot_cpu_data.scache.way_incr = (1 << 16);
- boot_cpu_data.scache.entry_shift = 5;
- boot_cpu_data.scache.ways = 4;
- boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
-
- boot_cpu_data.scache.entry_mask =
- (boot_cpu_data.scache.way_incr -
- boot_cpu_data.scache.linesz);
-
- boot_cpu_data.scache.sets = size /
- (boot_cpu_data.scache.linesz *
- boot_cpu_data.scache.ways);
-
- boot_cpu_data.scache.way_size =
- (boot_cpu_data.scache.sets *
- boot_cpu_data.scache.linesz);
- }
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index e6737f3d0df252..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
- return platform_add_devices(sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh4202_early_devices,
- ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
deleted file mode 100644
index 19c8f1d69071c3..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <generated/machtypes.h>
-#include <asm/platform_early.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffc80000,
- .end = 0xffc80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port sci_platform_data = {
- .type = PORT_SCI,
-};
-
-static struct resource sci_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = sci_resources,
- .num_resources = ARRAY_SIZE(sci_resources),
- .dev = {
- .platform_data = &sci_platform_data,
- },
-};
-
-static struct plat_sci_port scif_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif_resources,
- .num_resources = ARRAY_SIZE(scif_resources),
- .dev = {
- .platform_data = &scif_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xfe100000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-#endif
-
-static struct platform_device *sh7750_devices[] __initdata = {
- &rtc_device,
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-static int __init sh7750_devices_setup(void)
-{
- if (mach_is_rts7751r2d()) {
- platform_device_register(&scif_device);
- } else {
- platform_device_register(&sci_device);
- platform_device_register(&scif_device);
- }
-
- return platform_add_devices(sh7750_devices,
- ARRAY_SIZE(sh7750_devices));
-}
-arch_initcall(sh7750_devices_setup);
-
-static struct platform_device *sh7750_early_devices[] __initdata = {
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-void __init plat_early_device_setup(void)
-{
- struct platform_device *dev[1];
-
- if (mach_is_rts7751r2d()) {
- scif_platform_data.scscr |= SCSCR_CKE1;
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- } else {
- dev[0] = &sci_device;
- sh_early_platform_add_devices(dev, 1);
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- }
-
- sh_early_platform_add_devices(sh7750_early_devices,
- ARRAY_SIZE(sh7750_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, GPIOI, DMAC,
- PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
- TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
-
- /* interrupt groups */
- PCIC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
- INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
- TMU4, TMU3,
- PCIC1, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-static struct intc_vect vectors_dma4[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
- vectors_dma4, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R and SH7751R both have 8-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_dma8[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
- vectors_dma8, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_tmu34[] __initdata = {
- INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, TMU4, TMU3,
- PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2,
- PCIC1_PCIDMA3, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34",
- vectors_tmu34, NULL,
- mask_registers, prio_registers, NULL);
-#endif
-
-/* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7751 and SH7751R both have PCI */
-#if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_pci[] __initdata = {
- INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0),
- INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0),
- INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60),
- INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20),
-};
-
-static struct intc_group groups_pci[] __initdata = {
- INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3),
-};
-
-static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci,
- mask_registers, prio_registers, NULL);
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-void __init plat_irq_setup(void)
-{
- /*
- * same vectors for SH7750, SH7750S and SH7091 except for IRLM,
- * see below..
- */
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091)
- BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */
- return;
-#endif
-
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
deleted file mode 100644
index 14212f5d803cd4..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3,
- HUDI, GPIOI, DMAC,
- IRQ4, IRQ5, IRQ6, IRQ7,
- HCAN20, HCAN21,
- SSI0, SSI1,
- HAC0, HAC1,
- I2C0, I2C1,
- USB, LCDC,
- DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI,
- MMCIF0, MMCIF1, MMCIF2, MMCIF3,
- MFI, ADC, CMT,
- TMU0, TMU1, TMU2,
- WDT, REF,
-
- /* interrupt groups */
- DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
- INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
- INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
- INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960),
- INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0),
- INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0),
- INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20),
- INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0),
- INTC_VECT(DMABRG2, 0xac0),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
- INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20),
- INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60),
- INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0),
- INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0),
- INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20),
- INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60),
- INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20),
- INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60),
- INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
- INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21,
- SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC,
- 0, DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } },
- { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI, MMCIF0, MMCIF1, MMCIF2,
- MMCIF3, 0, 0, 0, 0, 0, 0, 0,
- 0, MFI, 0, 0, 0, 0, ADC, CMT, } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1,
- HAC0, HAC1, I2C0, I2C1 } },
- { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0,
- SCIF1, SCIF2, SIM, HSPI } },
- { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0,
- MFI, 0, ADC, CMT } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfe600000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .scscr = SCSCR_REIE,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfe610000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb20)),
- DEFINE_RES_IRQ(evt2irq(0xb60)),
- DEFINE_RES_IRQ(evt2irq(0xb40)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe620000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
- DEFINE_RES_IRQ(evt2irq(0xba0)),
- DEFINE_RES_IRQ(evt2irq(0xbe0)),
- DEFINE_RES_IRQ(evt2irq(0xbc0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- /*
- * This is actually a SIM card module serial port, based on an SCI with
- * additional registers. The sh-sci driver doesn't support the SIM port
- * type, declare it as a SCI. Don't declare the additional registers in
- * the memory resource or the driver will compute an incorrect regshift
- * value.
- */
- .type = PORT_SCI,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe480000, 0x10),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-
-static struct platform_device *sh7760_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-static int __init sh7760_devices_setup(void)
-{
- return platform_add_devices(sh7760_devices,
- ARRAY_SIZE(sh7760_devices));
-}
-arch_initcall(sh7760_devices_setup);
-
-static struct platform_device *sh7760_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7760_early_devices,
- ARRAY_SIZE(sh7760_early_devices));
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1 << 7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irq);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
deleted file mode 100644
index 42edf2e54e8543..00000000000000
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ /dev/null
@@ -1,930 +0,0 @@
-/*
- * Floating point emulation support for subnormalised numbers on SH4
- * architecture This file is derived from the SoftFloat IEC/IEEE
- * Floating-point Arithmetic Package, Release 2 the original license of
- * which is reproduced below.
- *
- * ========================================================================
- *
- * This C source file is part of the SoftFloat IEC/IEEE Floating-point
- * Arithmetic Package, Release 2.
- *
- * Written by John R. Hauser. This work was made possible in part by the
- * International Computer Science Institute, located at Suite 600, 1947 Center
- * Street, Berkeley, California 94704. Funding was partially provided by the
- * National Science Foundation under grant MIP-9311980. The original version
- * of this code was written as part of a project to build a fixed-point vector
- * processor in collaboration with the University of California at Berkeley,
- * overseen by Profs. Nelson Morgan and John Wawrzynek. More information
- * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
- * arithmetic/softfloat.html'.
- *
- * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
- * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
- * TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
- * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
- * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
- *
- * Derivative works are acceptable, even for commercial purposes, so long as
- * (1) they include prominent notice that the work is derivative, and (2) they
- * include prominent notice akin to these three paragraphs for those parts of
- * this code that are retained.
- *
- * ========================================================================
- *
- * SH4 modifications by Ismail Dhaoui <ismail.dhaoui@st.com>
- * and Kamel Khelifi <kamel.khelifi@st.com>
- */
-#include <linux/kernel.h>
-#include <cpu/fpu.h>
-#include <asm/div64.h>
-
-#define LIT64( a ) a##LL
-
-typedef char flag;
-typedef unsigned char uint8;
-typedef signed char int8;
-typedef int uint16;
-typedef int int16;
-typedef unsigned int uint32;
-typedef signed int int32;
-
-typedef unsigned long long int bits64;
-typedef signed long long int sbits64;
-
-typedef unsigned char bits8;
-typedef signed char sbits8;
-typedef unsigned short int bits16;
-typedef signed short int sbits16;
-typedef unsigned int bits32;
-typedef signed int sbits32;
-
-typedef unsigned long long int uint64;
-typedef signed long long int int64;
-
-typedef unsigned long int float32;
-typedef unsigned long long float64;
-
-extern void float_raise(unsigned int flags); /* in fpu.c */
-extern int float_rounding_mode(void); /* in fpu.c */
-
-bits64 extractFloat64Frac(float64 a);
-flag extractFloat64Sign(float64 a);
-int16 extractFloat64Exp(float64 a);
-int16 extractFloat32Exp(float32 a);
-flag extractFloat32Sign(float32 a);
-bits32 extractFloat32Frac(float32 a);
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
-float64 float64_sub(float64 a, float64 b);
-float32 float32_sub(float32 a, float32 b);
-float32 float32_add(float32 a, float32 b);
-float64 float64_add(float64 a, float64 b);
-float64 float64_div(float64 a, float64 b);
-float32 float32_div(float32 a, float32 b);
-float32 float32_mul(float32 a, float32 b);
-float64 float64_mul(float64 a, float64 b);
-float32 float64_to_float32(float64 a);
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
-
-static int8 countLeadingZeros32(bits32 a);
-static int8 countLeadingZeros64(bits64 a);
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp,
- bits64 zSig);
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign);
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign);
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig);
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp,
- bits32 zSig);
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig);
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign);
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign);
-static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr,
- bits64 * zSigPtr);
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b);
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr);
-
-bits64 extractFloat64Frac(float64 a)
-{
- return a & LIT64(0x000FFFFFFFFFFFFF);
-}
-
-flag extractFloat64Sign(float64 a)
-{
- return a >> 63;
-}
-
-int16 extractFloat64Exp(float64 a)
-{
- return (a >> 52) & 0x7FF;
-}
-
-int16 extractFloat32Exp(float32 a)
-{
- return (a >> 23) & 0xFF;
-}
-
-flag extractFloat32Sign(float32 a)
-{
- return a >> 31;
-}
-
-bits32 extractFloat32Frac(float32 a)
-{
- return a & 0x007FFFFF;
-}
-
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig;
-}
-
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
-{
- bits64 z;
-
- if (count == 0) {
- z = a;
- } else if (count < 64) {
- z = (a >> count) | ((a << ((-count) & 63)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static int8 countLeadingZeros32(bits32 a)
-{
- static const int8 countLeadingZerosHigh[] = {
- 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
- };
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < 0x10000) {
- shiftCount += 16;
- a <<= 16;
- }
- if (a < 0x1000000) {
- shiftCount += 8;
- a <<= 8;
- }
- shiftCount += countLeadingZerosHigh[a >> 24];
- return shiftCount;
-
-}
-
-static int8 countLeadingZeros64(bits64 a)
-{
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < ((bits64) 1) << 32) {
- shiftCount += 32;
- } else {
- a >>= 32;
- }
- shiftCount += countLeadingZeros32(a);
- return shiftCount;
-
-}
-
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(zSig) - 1;
- return roundAndPackFloat64(zSign, zExp - shiftCount,
- zSig << shiftCount);
-
-}
-
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 10;
- bSig <<= 10;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0x7FF) {
- return packFloat64(zSign ^ 1, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- bSig |= LIT64(0x4000000000000000);
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- aSig |= LIT64(0x4000000000000000);
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat64(zSign, zExp, zSig);
-
-}
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 9;
- bSig <<= 9;
- if (0 < expDiff) {
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0x7FF) {
- return a;
- }
- if (aExp == 0)
- return packFloat64(zSign, 0, (aSig + bSig) >> 9);
- zSig = LIT64(0x4000000000000000) + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= LIT64(0x2000000000000000);
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits64) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig;
-}
-
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
-{
- bits32 z;
- if (count == 0) {
- z = a;
- } else if (count < 32) {
- z = (a >> count) | ((a << ((-count) & 31)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- flag roundNearestEven;
- int8 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x40;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x7F;
- if (0xFD <= (bits16) zExp) {
- if ((0xFD < zExp)
- || ((zExp == 0xFD)
- && ((sbits32) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat32(zSign, 0xFF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement < 0x80000000);
- shift32RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x7F;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 7;
- zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(zSig) - 1;
- return roundAndPackFloat32(zSign, zExp - shiftCount,
- zSig << shiftCount);
-}
-
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- flag roundNearestEven;
- int16 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x200;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x3FF;
- if (0x7FD <= (bits16) zExp) {
- if ((0x7FD < zExp)
- || ((zExp == 0x7FD)
- && ((sbits64) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat64(zSign, 0x7FF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement <
- LIT64(0x8000000000000000));
- shift64RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x3FF;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 10;
- zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat64(zSign, zExp, zSig);
-
-}
-
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 7;
- bSig <<= 7;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0xFF) {
- return packFloat32(zSign ^ 1, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x40000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- bSig |= 0x40000000;
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x40000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- aSig |= 0x40000000;
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 6;
- bSig <<= 6;
- if (0 < expDiff) {
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x20000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x20000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0xFF) {
- return a;
- }
- if (aExp == 0)
- return packFloat32(zSign, 0, (aSig + bSig) >> 6);
- zSig = 0x40000000 + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= 0x20000000;
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits32) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_sub(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return subFloat64Sigs(a, b, aSign);
- } else {
- return addFloat64Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_sub(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return subFloat32Sigs(a, b, aSign);
- } else {
- return addFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_add(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return addFloat32Sigs(a, b, aSign);
- } else {
- return subFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float64 float64_add(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return addFloat64Sigs(a, b, aSign);
- } else {
- return subFloat64Sigs(a, b, aSign);
- }
-}
-
-static void
-normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(aSig) - 11;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-}
-
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- bits64 z1;
-
- z1 = a1 + b1;
- *z1Ptr = z1;
- *z0Ptr = a0 + b0 + (z1 < a1);
-}
-
-void
-sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- *z1Ptr = a1 - b1;
- *z0Ptr = a0 - b0 - (a1 < b1);
-}
-
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
-{
- bits64 b0, b1;
- bits64 rem0, rem1, term0, term1;
- bits64 z, tmp;
- if (b <= a0)
- return LIT64(0xFFFFFFFFFFFFFFFF);
- b0 = b >> 32;
- tmp = a0;
- do_div(tmp, b0);
-
- z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : tmp << 32;
- mul64To128(b, z, &term0, &term1);
- sub128(a0, a1, term0, term1, &rem0, &rem1);
- while (((sbits64) rem0) < 0) {
- z -= LIT64(0x100000000);
- b1 = b << 32;
- add128(rem0, rem1, b0, b1, &rem0, &rem1);
- }
- rem0 = (rem0 << 32) | (rem1 >> 32);
- tmp = rem0;
- do_div(tmp, b0);
- z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : tmp;
- return z;
-}
-
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
-{
- bits32 aHigh, aLow, bHigh, bLow;
- bits64 z0, zMiddleA, zMiddleB, z1;
-
- aLow = a;
- aHigh = a >> 32;
- bLow = b;
- bHigh = b >> 32;
- z1 = ((bits64) aLow) * bLow;
- zMiddleA = ((bits64) aLow) * bHigh;
- zMiddleB = ((bits64) aHigh) * bLow;
- z0 = ((bits64) aHigh) * bHigh;
- zMiddleA += zMiddleB;
- z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32);
- zMiddleA <<= 32;
- z1 += zMiddleA;
- z0 += (z1 < zMiddleA);
- *z1Ptr = z1;
- *z0Ptr = z0;
-
-}
-
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(aSig) - 8;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-
-}
-
-float64 float64_div(float64 a, float64 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- bits64 rem0, rem1;
- bits64 term0, term1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0x7FF) {
- if (bExp == 0x7FF) {
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- if ((aExp | aSig) == 0) {
- float_raise(FPSCR_CAUSE_INVALID);
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x3FD;
- aSig = (aSig | LIT64(0x0010000000000000)) << 10;
- bSig = (bSig | LIT64(0x0010000000000000)) << 11;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = estimateDiv128To64(aSig, 0, bSig);
- if ((zSig & 0x1FF) <= 2) {
- mul64To128(bSig, zSig, &term0, &term1);
- sub128(aSig, 0, term0, term1, &rem0, &rem1);
- while ((sbits64) rem0 < 0) {
- --zSig;
- add128(rem0, rem1, 0, bSig, &rem0, &rem1);
- }
- zSig |= (rem1 != 0);
- }
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 float32_div(float32 a, float32 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig;
- uint64_t zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0xFF) {
- if (bExp == 0xFF) {
- }
- return packFloat32(zSign, 0xFF, 0);
- }
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- return packFloat32(zSign, 0xFF, 0);
- }
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x7D;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = (((bits64) aSig) << 32);
- do_div(zSig, bSig);
-
- if ((zSig & 0x3F) == 0) {
- zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32);
- }
- return roundAndPackFloat32(zSign, zExp, (bits32)zSig);
-
-}
-
-float32 float32_mul(float32 a, float32 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned int aSig, bSig;
- unsigned long long zSig64;
- unsigned int zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0))
- return roundAndPackFloat32(zSign, 0xff, 0);
-
- zExp = aExp + bExp - 0x7F;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64);
- zSig = zSig64;
- if (0 <= (signed int)(zSig << 1)) {
- zSig <<= 1;
- --zExp;
- }
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_mul(float64 a, float64 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned long long int aSig, bSig, zSig0, zSig1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
-
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0))
- return roundAndPackFloat64(zSign, 0x7ff, 0);
-
- zExp = aExp + bExp - 0x3FF;
- aSig = (aSig | 0x0010000000000000LL) << 10;
- bSig = (bSig | 0x0010000000000000LL) << 11;
- mul64To128(aSig, bSig, &zSig0, &zSig1);
- zSig0 |= (zSig1 != 0);
- if (0 <= (signed long long int)(zSig0 << 1)) {
- zSig0 <<= 1;
- --zExp;
- }
- return roundAndPackFloat64(zSign, zExp, zSig0);
-}
-
-/*
- * -------------------------------------------------------------------------------
- * Returns the result of converting the double-precision floating-point value
- * `a' to the single-precision floating-point format. The conversion is
- * performed according to the IEC/IEEE Standard for Binary Floating-point
- * Arithmetic.
- * -------------------------------------------------------------------------------
- * */
-float32 float64_to_float32(float64 a)
-{
- flag aSign;
- int16 aExp;
- bits64 aSig;
- bits32 zSig;
-
- aSig = extractFloat64Frac( a );
- aExp = extractFloat64Exp( a );
- aSign = extractFloat64Sign( a );
-
- shift64RightJamming( aSig, 22, &aSig );
- zSig = aSig;
- if ( aExp || zSig ) {
- zSig |= 0x40000000;
- aExp -= 0x381;
- }
- return roundAndPackFloat32(aSign, aExp, zSig);
-}
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
deleted file mode 100644
index a76b94e41e9134..00000000000000
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/sq.c
- *
- * General management API for SH-4 integrated Store Queues
- *
- * Copyright (C) 2001 - 2006 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/bitmap.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/prefetch.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <cpu/sq.h>
-
-struct sq_mapping;
-
-struct sq_mapping {
- const char *name;
-
- unsigned long sq_addr;
- unsigned long addr;
- unsigned int size;
-
- struct sq_mapping *next;
-};
-
-static struct sq_mapping *sq_mapping_list;
-static DEFINE_SPINLOCK(sq_mapping_lock);
-static struct kmem_cache *sq_cache;
-static unsigned long *sq_bitmap;
-
-#define store_queue_barrier() \
-do { \
- (void)__raw_readl(P4SEG_STORE_QUE); \
- __raw_writel(0, P4SEG_STORE_QUE + 0); \
- __raw_writel(0, P4SEG_STORE_QUE + 8); \
-} while (0);
-
-/**
- * sq_flush_range - Flush (prefetch) a specific SQ range
- * @start: the store queue address to start flushing from
- * @len: the length to flush
- *
- * Flushes the store queue cache from @start to @start + @len in a
- * linear fashion.
- */
-void sq_flush_range(unsigned long start, unsigned int len)
-{
- unsigned long *sq = (unsigned long *)start;
-
- /* Flush the queues */
- for (len >>= 5; len--; sq += 8)
- prefetchw(sq);
-
- /* Wait for completion */
- store_queue_barrier();
-}
-EXPORT_SYMBOL(sq_flush_range);
-
-static inline void sq_mapping_list_add(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- p = &sq_mapping_list;
- while ((tmp = *p) != NULL)
- p = &tmp->next;
-
- map->next = tmp;
- *p = map;
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static inline void sq_mapping_list_del(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
- if (tmp == map) {
- *p = tmp->next;
- break;
- }
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
-{
-#if defined(CONFIG_MMU)
- struct vm_struct *vma;
-
- vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr,
- SQ_ADDRMAX, __builtin_return_address(0));
- if (!vma)
- return -ENOMEM;
-
- vma->phys_addr = map->addr;
-
- if (ioremap_page_range((unsigned long)vma->addr,
- (unsigned long)vma->addr + map->size,
- vma->phys_addr, prot)) {
- vunmap(vma->addr);
- return -EAGAIN;
- }
-#else
- /*
- * Without an MMU (or with it turned off), this is much more
- * straightforward, as we can just load up each queue's QACR with
- * the physical address appropriately masked.
- */
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
-#endif
-
- return 0;
-}
-
-/**
- * sq_remap - Map a physical address through the Store Queues
- * @phys: Physical address of mapping.
- * @size: Length of mapping.
- * @name: User invoking mapping.
- * @prot: Protection bits.
- *
- * Remaps the physical address @phys through the next available store queue
- * address of @size length. @name is logged at boot time as well as through
- * the sysfs interface.
- */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot)
-{
- struct sq_mapping *map;
- unsigned long end;
- unsigned int psz;
- int ret, page;
-
- /* Don't allow wraparound or zero size */
- end = phys + size - 1;
- if (unlikely(!size || end < phys))
- return -EINVAL;
- /* Don't allow anyone to remap normal memory.. */
- if (unlikely(phys < virt_to_phys(high_memory)))
- return -EINVAL;
-
- phys &= PAGE_MASK;
- size = PAGE_ALIGN(end + 1) - phys;
-
- map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
- if (unlikely(!map))
- return -ENOMEM;
-
- map->addr = phys;
- map->size = size;
- map->name = name;
-
- page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT,
- get_order(map->size));
- if (unlikely(page < 0)) {
- ret = -ENOSPC;
- goto out;
- }
-
- map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
-
- ret = __sq_remap(map, prot);
- if (unlikely(ret != 0))
- goto out;
-
- psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- pr_info("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n",
- likely(map->name) ? map->name : "???",
- psz, psz == 1 ? " " : "s",
- map->sq_addr, map->addr);
-
- sq_mapping_list_add(map);
-
- return map->sq_addr;
-
-out:
- kmem_cache_free(sq_cache, map);
- return ret;
-}
-EXPORT_SYMBOL(sq_remap);
-
-/**
- * sq_unmap - Unmap a Store Queue allocation
- * @vaddr: Pre-allocated Store Queue mapping.
- *
- * Unmaps the store queue allocation @map that was previously created by
- * sq_remap(). Also frees up the pte that was previously inserted into
- * the kernel page table and discards the UTLB translation.
- */
-void sq_unmap(unsigned long vaddr)
-{
- struct sq_mapping **p, *map;
- int page;
-
- for (p = &sq_mapping_list; (map = *p); p = &map->next)
- if (map->sq_addr == vaddr)
- break;
-
- if (unlikely(!map)) {
- printk("%s: bad store queue address 0x%08lx\n",
- __func__, vaddr);
- return;
- }
-
- page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
- bitmap_release_region(sq_bitmap, page, get_order(map->size));
-
-#ifdef CONFIG_MMU
- {
- /*
- * Tear down the VMA in the MMU case.
- */
- struct vm_struct *vma;
-
- vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
- if (!vma) {
- printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __func__, map->sq_addr);
- return;
- }
- }
-#endif
-
- sq_mapping_list_del(map);
-
- kmem_cache_free(sq_cache, map);
-}
-EXPORT_SYMBOL(sq_unmap);
-
-/*
- * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
- * there is any other easy way to add things on a per-cpu basis without
- * putting the directory entries somewhere stupid and having to create
- * links in sysfs by hand back in to the per-cpu directories.
- *
- * Some day we may want to have an additional abstraction per store
- * queue, but considering the kobject hell we already have to deal with,
- * it's simply not worth the trouble.
- */
-static struct kobject *sq_kobject[NR_CPUS];
-
-struct sq_sysfs_attr {
- struct attribute attr;
- ssize_t (*show)(char *buf);
- ssize_t (*store)(const char *buf, size_t count);
-};
-
-#define to_sq_sysfs_attr(a) container_of(a, struct sq_sysfs_attr, attr)
-
-static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->show))
- return sattr->show(buf);
-
- return -EIO;
-}
-
-static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->store))
- return sattr->store(buf, count);
-
- return -EIO;
-}
-
-static ssize_t mapping_show(char *buf)
-{
- struct sq_mapping **list, *entry;
- char *p = buf;
-
- for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
- p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
- entry->sq_addr, entry->sq_addr + entry->size,
- entry->addr, entry->name);
-
- return p - buf;
-}
-
-static ssize_t mapping_store(const char *buf, size_t count)
-{
- unsigned long base = 0, len = 0;
-
- sscanf(buf, "%lx %lx", &base, &len);
- if (!base)
- return -EIO;
-
- if (likely(len)) {
- int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
- if (ret < 0)
- return ret;
- } else
- sq_unmap(base);
-
- return count;
-}
-
-static struct sq_sysfs_attr mapping_attr =
- __ATTR(mapping, 0644, mapping_show, mapping_store);
-
-static struct attribute *sq_sysfs_attrs[] = {
- &mapping_attr.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(sq_sysfs);
-
-static const struct sysfs_ops sq_sysfs_ops = {
- .show = sq_sysfs_show,
- .store = sq_sysfs_store,
-};
-
-static struct kobj_type ktype_percpu_entry = {
- .sysfs_ops = &sq_sysfs_ops,
- .default_groups = sq_sysfs_groups,
-};
-
-static int sq_dev_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj;
- int error;
-
- sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
- if (unlikely(!sq_kobject[cpu]))
- return -ENOMEM;
-
- kobj = sq_kobject[cpu];
- error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
- "%s", "sq");
- if (!error)
- kobject_uevent(kobj, KOBJ_ADD);
- return error;
-}
-
-static void sq_dev_remove(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj = sq_kobject[cpu];
-
- kobject_put(kobj);
-}
-
-static struct subsys_interface sq_interface = {
- .name = "sq",
- .subsys = &cpu_subsys,
- .add_dev = sq_dev_add,
- .remove_dev = sq_dev_remove,
-};
-
-static int __init sq_api_init(void)
-{
- unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
- unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
- int ret = -ENOMEM;
-
- printk(KERN_NOTICE "sq: Registering store queue API.\n");
-
- sq_cache = kmem_cache_create("store_queue_cache",
- sizeof(struct sq_mapping), 0, 0, NULL);
- if (unlikely(!sq_cache))
- return ret;
-
- sq_bitmap = kzalloc(size, GFP_KERNEL);
- if (unlikely(!sq_bitmap))
- goto out;
-
- ret = subsys_interface_register(&sq_interface);
- if (unlikely(ret != 0))
- goto out;
-
- return 0;
-
-out:
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-
- return ret;
-}
-
-static void __exit sq_api_exit(void)
-{
- subsys_interface_unregister(&sq_interface);
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-}
-
-module_init(sq_api_init);
-module_exit(sq_api_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
-MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
deleted file mode 100644
index baf73a8fc2a0f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7757) += setup-sh7757.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o serial-sh7722.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7734) += setup-sh7734.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
-obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o intc-shx3.o
-
-# SMP setup
-smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SUBTYPE_SH7757) := clock-sh7757.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7723.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7724.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7734) := clock-sh7734.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7366.o
-clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7734) := pinmux-sh7734.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7757) := pinmux-sh7757.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SHX3) := pinmux-shx3.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_SMP) += $(smp-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 32cb5d1fd3b32f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7343 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP004, MSTP003, MSTP002, MSTP001,
- MSTP109, MSTP108, MSTP100,
- MSTP225, MSTP224, MSTP218, MSTP217, MSTP216,
- MSTP214, MSTP213, MSTP212, MSTP211, MSTP208,
- MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP003] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [MSTP225] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 25, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP216] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 16, 0),
- [MSTP214] = MSTP(&r_clk, MSTPCR2, 14, 0),
- [MSTP213] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 13, 0),
- [MSTP212] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 12, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP208] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [MSTP206] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("uram0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP004]),
-
- CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
- CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("sim0", &mstp_clks[MSTP216]),
- CLKDEV_CON_ID("keysc0", &mstp_clks[MSTP214]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP213]),
- CLKDEV_CON_ID("s3d40", &mstp_clks[MSTP212]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("siu0", &mstp_clks[MSTP208]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[MSTP206]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
deleted file mode 100644
index aa3444b41e72a2..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7366.c
- *
- * SH7366 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7366 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP002, MSTP001,
- MSTP109, MSTP100,
- MSTP227, MSTP226, MSTP224, MSTP223, MSTP222, MSTP218, MSTP217,
- MSTP211, MSTP207, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
-
- [MSTP227] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [MSTP226] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 26, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP223] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 23, 0),
- [MSTP222] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 22, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP207] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("rsmem0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
-
- CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
- CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
- CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("dacy0", &mstp_clks[MSTP223]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP222]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("veu1", &mstp_clks[MSTP207]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
deleted file mode 100644
index 38b057703eaada..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
- *
- * SH7722 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7722.h>
-
-/* SH7722 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_URAM] = SH_CLK_MSTP32(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_XYMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_TMU] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_SDHI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USBF] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
-
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[HWBLK_USBF]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
deleted file mode 100644
index 9dc3a987d7cf87..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ /dev/null
@@ -1,301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
- *
- * SH7723 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7723.h>
-
-/* SH7723 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x0dbf, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x0dbf, 0),
-};
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[] = {
- /* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
- [HWBLK_MERAM] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 0, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 28, 0),
- [HWBLK_ADC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_ICB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, CLK_ENABLE_ON_INIT),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 10, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_VEU2H1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU2H0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[HWBLK_MERAM]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_CON_ID("icb0", &mstp_clks[HWBLK_ICB]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret |= clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
deleted file mode 100644
index 2a1f0d847a2efb..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7724.c
- *
- * SH7724 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7724.h>
-
-/* SH7724 registers */
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define SPUCLKCR 0xa415003c
-#define FLLFRQ 0xa4150050
-#define LSTATS 0xa4150060
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The fll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long fll_recalc(struct clk *clk)
-{
- unsigned long mult = 0;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(FLLFRQ) & 0x3ff;
-
- if (__raw_readl(FLLFRQ) & 0x4000)
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops fll_clk_ops = {
- .recalc = fll_recalc,
-};
-
-static struct clk fll_clk = {
- .ops = &fll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCRA) >> 24) & 0x3f) + 1) * 2;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/* A fixed divide-by-3 block use by the div6 clocks */
-static unsigned long div3_recalc(struct clk *clk)
-{
- return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops div3_clk_ops = {
- .recalc = div3_recalc,
-};
-
-static struct clk div3_clk = {
- .ops = &div3_clk_ops,
- .parent = &pll_clk,
-};
-
-/* External input clock (pin name: FSIMCKA/FSIMCKB/DV_CLKI ) */
-struct clk sh7724_fsimcka_clk = {
-};
-
-struct clk sh7724_fsimckb_clk = {
-};
-
-struct clk sh7724_dv_clki = {
-};
-
-static struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &fll_clk,
- &pll_clk,
- &div3_clk,
- &sh7724_fsimcka_clk,
- &sh7724_fsimckb_clk,
- &sh7724_dv_clki,
-};
-
-static void div4_kick(struct clk *clk)
-{
- unsigned long value;
-
- /* set KICK bit in FRQCRA to update hardware setting */
- value = __raw_readl(FRQCRA);
- value |= (1 << 31);
- __raw_writel(value, FRQCRA);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCRA, 0, 0x2f7c, 0),
- [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
-};
-
-enum { DIV6_V, DIV6_I, DIV6_S, DIV6_FA, DIV6_FB, DIV6_NR };
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *common_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
-};
-
-static struct clk *vclkcr_parent[8] = {
- [0] = &div3_clk,
- [2] = &sh7724_dv_clki,
- [4] = &extal_clk,
-};
-
-static struct clk *fclkacr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimcka_clk,
- [3] = NULL,
-};
-
-static struct clk *fclkbcr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimckb_clk,
- [3] = NULL,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6_EXT(VCLKCR, 0,
- vclkcr_parent, ARRAY_SIZE(vclkcr_parent), 12, 3),
- [DIV6_I] = SH_CLK_DIV6_EXT(IRDACLKCR, 0,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_S] = SH_CLK_DIV6_EXT(SPUCLKCR, CLK_ENABLE_ON_INIT,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_FA] = SH_CLK_DIV6_EXT(FCLKACR, 0,
- fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
- [DIV6_FB] = SH_CLK_DIV6_EXT(FCLKBCR, 0,
- fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_RSMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
-
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 12, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 11, 0),
- [HWBLK_IIC0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_IIC1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [HWBLK_MMC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 29, 0),
- [HWBLK_ETHER] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 28, 0),
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 26, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_USB1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, 0),
- [HWBLK_USB0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 20, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 19, 0),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_VEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 15, 0),
- [HWBLK_CEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 13, 0),
- [HWBLK_BEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 12, 0),
- [HWBLK_2DDMAC] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 10, 0),
- [HWBLK_SPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("fll_clk", &fll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("div3_clk", &div3_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("vpu_clk", &div4_clks[DIV4_M1]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
- CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
- CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("rs0", &mstp_clks[HWBLK_RSMEM]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC0]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[HWBLK_IIC1]),
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[HWBLK_MMC]),
- CLKDEV_DEV_ID("sh7724-ether.0", &mstp_clks[HWBLK_ETHER]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU1]),
- CLKDEV_DEV_ID("renesas-ceu.1", &mstp_clks[HWBLK_CEU1]),
- CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
- CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_DEV_ID("sh-vou", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU0]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or fll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &fll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
deleted file mode 100644
index c81ee60eddb8e7..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7734.c
- *
- * Clock framework for SH7734
- *
- * Copyright (C) 2011, 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011, 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-#define MODEMR (0xFFCC0020)
-#define MODEMR_MASK (0x6)
-#define MODEMR_533MHZ (0x2)
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int mode = 12;
- u32 r = __raw_readl(MODEMR);
-
- if ((r & MODEMR_MASK) & MODEMR_533MHZ)
- mode = 16;
-
- return clk->parent->rate * mode;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_S, DIV4_B, DIV4_M, DIV4_S1, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQMR1, 28, 0x0003, CLK_ENABLE_ON_INIT),
- [DIV4_S] = DIV4(FRQMR1, 20, 0x000C, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQMR1, 16, 0x0140, CLK_ENABLE_ON_INIT),
- [DIV4_M] = DIV4(FRQMR1, 12, 0x0004, CLK_ENABLE_ON_INIT),
- [DIV4_S1] = DIV4(FRQMR1, 4, 0x0030, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQMR1, 0, 0x0140, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xFFC80030
-#define MSTPCR1 0xFFC80034
-#define MSTPCR3 0xFFC8003C
-
-enum {
- MSTP030, MSTP029, /* IIC */
- MSTP026, MSTP025, MSTP024, /* SCIF */
- MSTP023,
- MSTP022, MSTP021,
- MSTP019, /* HSCIF */
- MSTP016, MSTP015, MSTP014, /* TMU / TIMER */
- MSTP012, MSTP011, MSTP010, MSTP009, MSTP008, /* SSI */
- MSTP007, /* HSPI */
- MSTP115, /* ADMAC */
- MSTP114, /* GETHER */
- MSTP111, /* DMAC */
- MSTP109, /* VIDEOIN1 */
- MSTP108, /* VIDEOIN0 */
- MSTP107, /* RGPVBG */
- MSTP106, /* 2DG */
- MSTP103, /* VIEW */
- MSTP100, /* USB */
- MSTP331, /* MMC */
- MSTP330, /* MIMLB */
- MSTP323, /* SDHI0 */
- MSTP322, /* SDHI1 */
- MSTP321, /* SDHI2 */
- MSTP320, /* RQSPI */
- MSTP319, /* SRC0 */
- MSTP318, /* SRC1 */
- MSTP317, /* RSPI */
- MSTP316, /* RCAN0 */
- MSTP315, /* RCAN1 */
- MSTP314, /* FLTCL */
- MSTP313, /* ADC */
- MSTP312, /* MTU */
- MSTP304, /* IE-BUS */
- MSTP303, /* RTC */
- MSTP302, /* HIF */
- MSTP301, /* STIF0 */
- MSTP300, /* STIF1 */
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0),
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP019] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
-
- /* MSTPCR1 */
- [MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP109] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
- [MSTP107] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 7, 0),
- [MSTP106] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 6, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0),
-
- /* MSTPCR3 */
- [MSTP331] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 31, 0),
- [MSTP330] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 30, 0),
- [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0),
- [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0),
- [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0),
- [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0),
- [MSTP319] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 19, 0),
- [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 18, 0),
- [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 17, 0),
- [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 16, 0),
- [MSTP315] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 15, 0),
- [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 14, 0),
- [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 13, 0),
- [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 12, 0),
- [MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 4, 0),
- [MSTP303] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 3, 0),
- [MSTP302] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 2, 0),
- [MSTP301] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 1, 0),
- [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_M]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk1", &div4_clks[DIV4_S1]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("i2c-sh7734.0", &mstp_clks[MSTP030]),
- CLKDEV_DEV_ID("i2c-sh7734.1", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP024]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP023]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP022]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("ssi0", &mstp_clks[MSTP012]),
- CLKDEV_CON_ID("ssi1", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("ssi2", &mstp_clks[MSTP010]),
- CLKDEV_CON_ID("ssi3", &mstp_clks[MSTP009]),
- CLKDEV_CON_ID("sss", &mstp_clks[MSTP008]),
- CLKDEV_CON_ID("hspi", &mstp_clks[MSTP007]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP100]),
- CLKDEV_CON_ID("videoin0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("videoin1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("rgpvg", &mstp_clks[MSTP107]),
- CLKDEV_CON_ID("2dg", &mstp_clks[MSTP106]),
- CLKDEV_CON_ID("view", &mstp_clks[MSTP103]),
-
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP331]),
- CLKDEV_CON_ID("mimlb0", &mstp_clks[MSTP330]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP323]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP322]),
- CLKDEV_CON_ID("sdhi2", &mstp_clks[MSTP321]),
- CLKDEV_CON_ID("rqspi0", &mstp_clks[MSTP320]),
- CLKDEV_CON_ID("src0", &mstp_clks[MSTP319]),
- CLKDEV_CON_ID("src1", &mstp_clks[MSTP318]),
- CLKDEV_CON_ID("rsp0", &mstp_clks[MSTP317]),
- CLKDEV_CON_ID("rcan0", &mstp_clks[MSTP316]),
- CLKDEV_CON_ID("rcan1", &mstp_clks[MSTP315]),
- CLKDEV_CON_ID("fltcl0", &mstp_clks[MSTP314]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP313]),
- CLKDEV_CON_ID("mtu0", &mstp_clks[MSTP312]),
- CLKDEV_CON_ID("iebus0", &mstp_clks[MSTP304]),
- CLKDEV_DEV_ID("sh7734-gether.0", &mstp_clks[MSTP114]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP303]),
- CLKDEV_CON_ID("hif0", &mstp_clks[MSTP302]),
- CLKDEV_CON_ID("stif0", &mstp_clks[MSTP301]),
- CLKDEV_CON_ID("stif1", &mstp_clks[MSTP300]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(main_clks); i++)
- ret |= clk_register(main_clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
deleted file mode 100644
index 9acb72210fed48..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh7757.c
- *
- * SH7757 support for the clock framework
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 48000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN0) ? 24 : 16;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 1, 2, 1, 1, 4, 1, 6,
- 1, 1, 1, 16, 1, 24, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQCR, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- /*
- * P clock is always enable, because some P clock modules is used
- * by Host PC.
- */
- [DIV4_P] = DIV4(0, 0x2800, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(12, 0x00a0, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(20, 0x0004, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR2 0xffc10028
-
-enum { MSTP004, MSTP000, MSTP127, MSTP114, MSTP113, MSTP112,
- MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 27, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
- [MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
-
- /* MSTPCR2 */
- [MSTP220] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 20, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP112]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP111]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP110]),
-
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
- CLKDEV_DEV_ID("rspi.2", &mstp_clks[MSTP127]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
deleted file mode 100644
index aaff4b96812c6a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7763.c
- *
- * SH7763 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
-}
-
-static struct sh_clk_ops sh7763_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
- return clk->parent->rate / p0fc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7763_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7763_clk_ops[] = {
- &sh7763_master_clk_ops,
- &sh7763_module_clk_ops,
- &sh7763_bus_clk_ops,
- &sh7763_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7763_clk_ops))
- *ops = sh7763_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7763_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7763_shyway_clk_ops,
-};
-
-/*
- * Additional SH7763-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7763_onchip_clocks[] = {
- &sh7763_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7763_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
- struct clk *clkp = sh7763_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
deleted file mode 100644
index f356dfcd17b751..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
- *
- * SH7770 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
-static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
-}
-
-static struct sh_clk_ops sh7770_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x000f);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7770_clk_ops[] = {
- &sh7770_master_clk_ops,
- &sh7770_module_clk_ops,
- &sh7770_bus_clk_ops,
- &sh7770_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7770_clk_ops))
- *ops = sh7770_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
deleted file mode 100644
index fc0a3efb53d5e0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
- *
- * SH7780 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 2, 4 };
-static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
-static int pfc_divisors[] = { 1, 24, 24, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7780_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x0003);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7780_clk_ops[] = {
- &sh7780_master_clk_ops,
- &sh7780_module_clk_ops,
- &sh7780_bus_clk_ops,
- &sh7780_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7780_clk_ops))
- *ops = sh7780_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7780_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7780_shyway_clk_ops,
-};
-
-/*
- * Additional SH7780-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7780_onchip_clocks[] = {
- &sh7780_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7780_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
- struct clk *clkp = sh7780_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
deleted file mode 100644
index fca351378bbce6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
- *
- * SH7785 support for the clock framework
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <cpu/sh7785.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN4) ? 36 : 72;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
- DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_DU] = DIV4(4, 0x0ff0, 0),
- [DIV4_GA] = DIV4(8, 0x0030, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(24, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP013, MSTP012, MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP119, MSTP117, MSTP105, MSTP104, MSTP100,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP013] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 13, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP117] = SH_CLK_MSTP32(NULL, MSTPCR1, 17, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP100] = SH_CLK_MSTP32(NULL, MSTPCR1, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ga_clk", &div4_clks[DIV4_GA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP117]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
deleted file mode 100644
index f23862df3e8fb9..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
- *
- * SH7786 support for the clock framework
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- /*
- * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
- * while modes 3, 4, and 5 use an x32.
- */
- multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0b40, 0),
- [DIV4_DU] = DIV4(4, 0x0010, 0),
- [DIV4_DDR] = DIV4(12, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0360, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x0006, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc40030
-#define MSTPCR1 0xffc40034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP011, MSTP010, MSTP009, MSTP008,
- MSTP005, MSTP004, MSTP002,
- MSTP112, MSTP110, MSTP109, MSTP108,
- MSTP105, MSTP104, MSTP103, MSTP102,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP005] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP112] = SH_CLK_MSTP32(NULL, MSTPCR1, 12, 0),
- [MSTP110] = SH_CLK_MSTP32(NULL, MSTPCR1, 10, 0),
- [MSTP109] = SH_CLK_MSTP32(NULL, MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(NULL, MSTPCR1, 8, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP103] = SH_CLK_MSTP32(NULL, MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(NULL, MSTPCR1, 2, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]),
- CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP010]),
- CLKDEV_ICK_ID("fck", "sh-tmu.3", &mstp_clks[MSTP011]),
-
- CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]),
- CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP112]),
- CLKDEV_CON_ID("pcie2_fck", &mstp_clks[MSTP110]),
- CLKDEV_CON_ID("pcie1_fck", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("pcie0_fck", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("du_fck", &mstp_clks[MSTP103]),
- CLKDEV_CON_ID("ether_fck", &mstp_clks[MSTP102]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
deleted file mode 100644
index 6c7b6ab6cab5a6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-shx3.c
- *
- * SH-X3 support for the clock framework
- *
- * Copyright (C) 2006-2007 Renesas Technology Corp.
- * Copyright (C) 2006-2007 Renesas Solutions Corp.
- * Copyright (C) 2006-2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 16666666,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- /* PLL1 has a fixed x72 multiplier. */
- return clk->parent->rate * 72;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_SHA, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_SHA] = DIV4(4, 0x0ff0, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc00030
-#define MSTPCR1 0xffc00034
-
-enum { MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP001, MSTP000, MSTP119, MSTP105,
- MSTP104, MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shywaya_clk", &div4_clks[DIV4_SHA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]),
- CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/intc-shx3.c b/arch/sh/kernel/cpu/sh4a/intc-shx3.c
deleted file mode 100644
index eea87d25efbb3f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/intc-shx3.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared support for SH-X3 interrupt controllers.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/init.h>
-
-#define INTACK 0xfe4100b8
-#define INTACKCLR 0xfe4100bc
-#define INTC_USERIMASK 0xfe411000
-
-#ifdef CONFIG_INTC_BALANCING
-unsigned int irq_lookup(unsigned int irq)
-{
- return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
-}
-
-void irq_finish(unsigned int irq)
-{
- __raw_writel(irq2evt(irq), INTACKCLR);
-}
-#endif
-
-static int __init shx3_irq_setup(void)
-{
- return register_intc_userimask(INTC_USERIMASK);
-}
-arch_initcall(shx3_irq_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
deleted file mode 100644
index 3beb8fed3d289d..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/perf_event.c
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH-4A performance counters
- *
- * Copyright (C) 2009, 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx))
-#define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx))
-
-#define CCBR_CIT_MASK (0x7ff << 6)
-#define CCBR_DUC (1 << 3)
-#define CCBR_CMDS (1 << 1)
-#define CCBR_PPCE (1 << 0)
-
-#ifdef CONFIG_CPU_SHX3
-/*
- * The PMCAT location for SH-X3 CPUs was quietly moved, while the CCBR
- * and PMCTR locations remains tentatively constant. This change remains
- * wholly undocumented, and was simply found through trial and error.
- *
- * Early cuts of SH-X3 still appear to use the SH-X/SH-X2 locations, and
- * it's unclear when this ceased to be the case. For now we always use
- * the new location (if future parts keep up with this trend then
- * scanning for them at runtime also remains a viable option.)
- *
- * The gap in the register space also suggests that there are other
- * undocumented counters, so this will need to be revisited at a later
- * point in time.
- */
-#define PPC_PMCAT 0xfc100240
-#else
-#define PPC_PMCAT 0xfc100080
-#endif
-
-#define PMCAT_OVF3 (1 << 27)
-#define PMCAT_CNN3 (1 << 26)
-#define PMCAT_CLR3 (1 << 25)
-#define PMCAT_OVF2 (1 << 19)
-#define PMCAT_CLR2 (1 << 17)
-#define PMCAT_OVF1 (1 << 11)
-#define PMCAT_CNN1 (1 << 10)
-#define PMCAT_CLR1 (1 << 9)
-#define PMCAT_OVF0 (1 << 3)
-#define PMCAT_CLR0 (1 << 1)
-
-static struct sh_pmu sh4a_pmu;
-
-/*
- * Supported raw event codes:
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x0000 number of elapsed cycles
- * 0x0200 number of elapsed cycles in privileged mode
- * 0x0280 number of elapsed cycles while SR.BL is asserted
- * 0x0202 instruction execution
- * 0x0203 instruction execution in parallel
- * 0x0204 number of unconditional branches
- * 0x0208 number of exceptions
- * 0x0209 number of interrupts
- * 0x0220 UTLB miss caused by instruction fetch
- * 0x0222 UTLB miss caused by operand access
- * 0x02a0 number of ITLB misses
- * 0x0028 number of accesses to instruction memories
- * 0x0029 number of accesses to instruction cache
- * 0x002a instruction cache miss
- * 0x022e number of access to instruction X/Y memory
- * 0x0030 number of reads to operand memories
- * 0x0038 number of writes to operand memories
- * 0x0031 number of operand cache read accesses
- * 0x0039 number of operand cache write accesses
- * 0x0032 operand cache read miss
- * 0x003a operand cache write miss
- * 0x0236 number of reads to operand X/Y memory
- * 0x023e number of writes to operand X/Y memory
- * 0x0237 number of reads to operand U memory
- * 0x023f number of writes to operand U memory
- * 0x0337 number of U memory read buffer misses
- * 0x02b4 number of wait cycles due to operand read access
- * 0x02bc number of wait cycles due to operand write access
- * 0x0033 number of wait cycles due to operand cache read miss
- * 0x003b number of wait cycles due to operand cache write miss
- */
-
-/*
- * Special reserved bits used by hardware emulators, read values will
- * vary, but writes must always be 0.
- */
-#define PMCAT_EMU_CLR_MASK ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
-
-static const int sh4a_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0000,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x0202,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0029, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x002a, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0204,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh4a_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0031,
- [ C(RESULT_MISS) ] = 0x0032,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0039,
- [ C(RESULT_MISS) ] = 0x003a,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0029,
- [ C(RESULT_MISS) ] = 0x002a,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0030,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0038,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0222,
- [ C(RESULT_MISS) ] = 0x0220,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x02a0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh4a_event_map(int event)
-{
- return sh4a_general_events[event];
-}
-
-static u64 sh4a_pmu_read(int idx)
-{
- return __raw_readl(PPC_PMCTR(idx));
-}
-
-static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
- __raw_writel(tmp, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_PMCAT);
- tmp &= ~PMCAT_EMU_CLR_MASK;
- tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
- __raw_writel(tmp, PPC_PMCAT);
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
- __raw_writel(tmp, PPC_CCBR(idx));
-
- __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
-}
-
-static void sh4a_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
-}
-
-static struct sh_pmu sh4a_pmu = {
- .name = "sh4a",
- .num_events = 2,
- .event_map = sh4a_event_map,
- .max_events = ARRAY_SIZE(sh4a_general_events),
- .raw_event_mask = 0x3ff,
- .cache_events = &sh4a_cache_events,
- .read = sh4a_pmu_read,
- .disable = sh4a_pmu_disable,
- .enable = sh4a_pmu_enable,
- .disable_all = sh4a_pmu_disable_all,
- .enable_all = sh4a_pmu_enable_all,
-};
-
-static int __init sh4a_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh4a_pmu);
-}
-early_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
deleted file mode 100644
index 0dd5312f930b1e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7722_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405018f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7722", sh7722_pfc_resources,
- ARRAY_SIZE(sh7722_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
deleted file mode 100644
index b67abc0637a487..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7723_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7723", sh7723_pfc_resources,
- ARRAY_SIZE(sh7723_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
deleted file mode 100644
index b43c3259060bbe..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7724_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7724", sh7724_pfc_resources,
- ARRAY_SIZE(sh7724_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
deleted file mode 100644
index 46256b19619a79..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7734_pfc_resources[] = {
- [0] = { /* PFC */
- .start = 0xFFFC0000,
- .end = 0xFFFC011C,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* GPIO */
- .start = 0xFFC40000,
- .end = 0xFFC4502B,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7734", sh7734_pfc_resources,
- ARRAY_SIZE(sh7734_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
deleted file mode 100644
index c92f304cb4bad1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7757_pfc_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7757", sh7757_pfc_resources,
- ARRAY_SIZE(sh7757_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
deleted file mode 100644
index f329de6e758a4f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7785_pfc_resources[] = {
- [0] = {
- .start = 0xffe70000,
- .end = 0xffe7008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7785", sh7785_pfc_resources,
- ARRAY_SIZE(sh7785_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
deleted file mode 100644
index 47e8639f3e71b1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7786_pfc_resources[] = {
- [0] = {
- .start = 0xffcc0000,
- .end = 0xffcc008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7786", sh7786_pfc_resources,
- ARRAY_SIZE(sh7786_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c b/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
deleted file mode 100644
index 6c02f625646754..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource shx3_pfc_resources[] = {
- [0] = {
- .start = 0xffc70000,
- .end = 0xffc7001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-shx3", shx3_pfc_resources,
- ARRAY_SIZE(shx3_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
deleted file mode 100644
index 6ecc8b6e133c69..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#define PSCR 0xA405011E
-
-static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (port->mapbase == 0xffe00000) {
- data = __raw_readw(PSCR);
- data &= ~0x03cf;
- if (!(cflag & CRTSCTS))
- data |= 0x0340;
-
- __raw_writew(data, PSCR);
- }
-}
-
-struct plat_sci_port_ops sh7722_sci_port_ops = {
- .init_pins = sh7722_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
deleted file mode 100644
index b6015188fab1f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7343 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc60)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x780),
- .end = evt2irq(0x7e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7343_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
-};
-
-static int __init sh7343_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7343_devices,
- ARRAY_SIZE(sh7343_devices));
-}
-arch_initcall(sh7343_devices_setup);
-
-static struct platform_device *sh7343_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7343_early_devices,
- ARRAY_SIZE(sh7343_early_devices));
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, TPU, Z3D4, USBI0, USBI1,
- MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF, SCIF1, SCIF2, SCIF3,
- SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
- IRDA, SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- JPU, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, USB,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
- INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
- INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
- INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
- INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
- INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
- INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
- INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
- INTC_GROUP(USB, USBI0, USBI1),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7343",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
deleted file mode 100644
index 6676beef053e59..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7366 Setup
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(usb_host_resources),
- .resource = usb_host_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU(1)",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU(2)",
- .start = 0xfe924000,
- .end = 0xfe9240b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7366_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
- &iic_device,
- &usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7366_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7366_devices,
- ARRAY_SIZE(sh7366_devices));
-}
-arch_initcall(sh7366_devices_setup);
-
-static struct platform_device *sh7366_early_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7366_early_devices,
- ARRAY_SIZE(sh7366_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- ICB,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, USB,
- MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
- DMAC4, DMAC5, DMAC_DADERR,
- SCIF, SCIFA1, SCIFA2,
- DENC, MSIOF,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- VEU2, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(ICB, 0x700),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
- INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
- INTC_VECT(MMC_MMC3I, 0xb40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
- INTC_VECT(SCIFA2, 0xc40),
- INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { 0, 0, 0, ICB } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, 0, 0, 0, 0, MSIOF } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, 0, 0, 0, 0, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7366",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* TODO: Register Node 1 */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
deleted file mode 100644
index 0c6757ef63f42c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ /dev/null
@@ -1,666 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7722 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/m66592.h>
-
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/siu.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7722.h>
-#include <cpu/serial.h>
-
-static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_TX,
- .addr = 0xa454c098,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb1,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_RX,
- .addr = 0xa454c090,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb2,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_TX,
- .addr = 0xa454c09c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb5,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_RX,
- .addr = 0xa454c094,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb6,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_channel sh7722_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7722_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7722_dmae_slaves),
- .channel = sh7722_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7722_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7722_dmae_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device dma_device = {
- .name = "sh-dma-engine",
- .id = -1,
- .resource = sh7722_dmae_resources,
- .num_resources = ARRAY_SIZE(sh7722_dmae_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0x7a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0x780),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .on_chip = 1,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "USBF",
- .start = 0x04480000,
- .end = 0x044800FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "m66592_udc",
- .id = 0, /* "usbf0" clock */
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct siu_platform siu_platform_data = {
- .dma_slave_tx_a = SHDMA_SLAVE_SIUA_TX,
- .dma_slave_rx_a = SHDMA_SLAVE_SIUA_RX,
- .dma_slave_tx_b = SHDMA_SLAVE_SIUB_TX,
- .dma_slave_rx_b = SHDMA_SLAVE_SIUB_RX,
-};
-
-static struct resource siu_resources[] = {
- [0] = {
- .start = 0xa4540000,
- .end = 0xa454c10f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device siu_device = {
- .name = "siu-pcm-audio",
- .id = -1,
- .dev = {
- .platform_data = &siu_platform_data,
- },
- .resource = siu_resources,
- .num_resources = ARRAY_SIZE(siu_resources),
-};
-
-static struct platform_device *sh7722_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usbf_device,
- &iic_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
- &siu_device,
- &dma_device,
-};
-
-static int __init sh7722_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7722_devices,
- ARRAY_SIZE(sh7722_devices));
-}
-arch_initcall(sh7722_devices_setup);
-
-static struct platform_device *sh7722_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7722_early_devices,
- ARRAY_SIZE(sh7722_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- VPU, TPU,
- USB_USBI0, USB_USBI1,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- CMT, TSIF, SIU, TWODG,
- TMU0, TMU1, TMU2,
- IRDA, JPU, LCDC,
-
- /* interrupt groups */
- SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(SIM_ERI, 0x700), INTC_VECT(SIM_RXI, 0x720),
- INTC_VECT(SIM_TXI, 0x740), INTC_VECT(SIM_TEI, 0x760),
- INTC_VECT(RTC_ATI, 0x780), INTC_VECT(RTC_PRI, 0x7a0),
- INTC_VECT(RTC_CUI, 0x7c0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(VPU, 0x980), INTC_VECT(TPU, 0x9a0),
- INTC_VECT(USB_USBI0, 0xa20), INTC_VECT(USB_USBI1, 0xa40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SIOF0, 0xc80),
- INTC_VECT(SIOF1, 0xca0), INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(IRDA, 0x480),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(USB, USB_USBI0, USB_USBI1),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, 0, SCIF2, SCIF1, SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, 0, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, RTC_CUI, RTC_PRI, RTC_ATI, 0, TPU, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7722",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
deleted file mode 100644
index 83ae1ad4a86e86..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Setup
- *
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7723.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU2H0",
- .start = 0xfe920000,
- .end = 0xfe92027b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU2H1",
- .start = 0xfe924000,
- .end = 0xfe92427b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7723_usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7723_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
- .resource = sh7723_usb_host_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct platform_device *sh7723_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &iic_device,
- &sh7723_usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7723_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7723_devices,
- ARRAY_SIZE(sh7723_devices));
-}
-arch_initcall(sh7723_devices_setup);
-
-static struct platform_device *sh7723_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7723_early_devices,
- ARRAY_SIZE(sh7723_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
- _2DG_TRI,_2DG_INI,_2DG_CEI,
- DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
- VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
- SCIFA_SCIFA0,
- VPU_VPUI,
- TPU_TPUI,
- ADC_ADI,
- USB_USI0,
- RTC_ATI,RTC_PRI,RTC_CUI,
- DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
- DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
- KEYSC_KEYI,
- SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
- MSIOF_MSIOFI0,MSIOF_MSIOFI1,
- SCIFA_SCIFA1,
- FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
- I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
- CMT_CMTI,
- TSIF_TSIFI,
- SIU_SIUI,
- SCIFA_SCIFA2,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA_IRDAI,
- ATAPI_ATAPII,
- VEU2H1_VEU2HI,
- LCDC_LCDCI,
- TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
- SDHI1, RTC, DMAC1B, SDHI0,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0,0x700),
- INTC_VECT(DMAC1A_DEI1,0x720),
- INTC_VECT(DMAC1A_DEI2,0x740),
- INTC_VECT(DMAC1A_DEI3,0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0,0x800),
- INTC_VECT(DMAC0A_DEI1,0x820),
- INTC_VECT(DMAC0A_DEI2,0x840),
- INTC_VECT(DMAC0A_DEI3,0x860),
-
- INTC_VECT(VIO_CEUI,0x880),
- INTC_VECT(VIO_BEUI,0x8A0),
- INTC_VECT(VIO_VEU2HI,0x8C0),
- INTC_VECT(VIO_VOUI,0x8E0),
-
- INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x980),
- INTC_VECT(TPU_TPUI,0x9A0),
- INTC_VECT(ADC_ADI,0x9E0),
- INTC_VECT(USB_USI0,0xA20),
-
- INTC_VECT(RTC_ATI,0xA80),
- INTC_VECT(RTC_PRI,0xAA0),
- INTC_VECT(RTC_CUI,0xAC0),
-
- INTC_VECT(DMAC1B_DEI4,0xB00),
- INTC_VECT(DMAC1B_DEI5,0xB20),
- INTC_VECT(DMAC1B_DADERR,0xB40),
-
- INTC_VECT(DMAC0B_DEI4,0xB80),
- INTC_VECT(DMAC0B_DEI5,0xBA0),
- INTC_VECT(DMAC0B_DADERR,0xBC0),
-
- INTC_VECT(KEYSC_KEYI,0xBE0),
- INTC_VECT(SCIF_SCIF0,0xC00),
- INTC_VECT(SCIF_SCIF1,0xC20),
- INTC_VECT(SCIF_SCIF2,0xC40),
- INTC_VECT(MSIOF_MSIOFI0,0xC80),
- INTC_VECT(MSIOF_MSIOFI1,0xCA0),
- INTC_VECT(SCIFA_SCIFA1,0xD00),
-
- INTC_VECT(FLCTL_FLSTEI,0xD80),
- INTC_VECT(FLCTL_FLTENDI,0xDA0),
- INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
- INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
-
- INTC_VECT(I2C_ALI,0xE00),
- INTC_VECT(I2C_TACKI,0xE20),
- INTC_VECT(I2C_WAITI,0xE40),
- INTC_VECT(I2C_DTEI,0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
-
- INTC_VECT(CMT_CMTI,0xF00),
- INTC_VECT(TSIF_TSIFI,0xF20),
- INTC_VECT(SIU_SIUI,0xF80),
- INTC_VECT(SCIFA_SCIFA2,0xFA0),
-
- INTC_VECT(TMU0_TUNI0,0x400),
- INTC_VECT(TMU0_TUNI1,0x420),
- INTC_VECT(TMU0_TUNI2,0x440),
-
- INTC_VECT(IRDA_IRDAI,0x480),
- INTC_VECT(ATAPI_ATAPII,0x4A0),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(VEU2H1_VEU2HI,0x560),
- INTC_VECT(LCDC_LCDCI,0x580),
-
- INTC_VECT(TMU1_TUNI0,0x920),
- INTC_VECT(TMU1_TUNI1,0x940),
- INTC_VECT(TMU1_TUNI2,0x960),
-
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
- INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
- INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
- INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
- INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
- INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { 0, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA_SCIFA2, SIU_SIUI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7723",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
deleted file mode 100644
index 0d990ab1ba2a9e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ /dev/null
@@ -1,1288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Setup
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Setup
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/notifier.h>
-
-#include <asm/suspend.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7724.h>
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0xa4e30020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2d,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0xa4e30024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2e,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0xa4e40020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x31,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0xa4e40024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x32,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_TX,
- .addr = 0xa4e50020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x35,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_RX,
- .addr = 0xa4e50024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x36,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_TX,
- .addr = 0xA4D80100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_RX,
- .addr = 0xA4D80100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_TX,
- .addr = 0xA4D80120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_RX,
- .addr = 0xA4D80120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_TX,
- .addr = 0xA4D90100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_RX,
- .addr = 0xA4D90100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_TX,
- .addr = 0xA4D90120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_RX,
- .addr = 0xA4D90120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_TX,
- .addr = 0x04cf0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc9,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_RX,
- .addr = 0x04cf0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xca,
- },
-};
-
-static const struct sh_dmae_channel sh7724_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7724_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7724_dmae_slaves),
- .channel = sh7724_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7724_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae1_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfdc08020,
- .end = 0xfdc0808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfdc09000,
- .end = 0xfdc0900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xb40),
- .end = evt2irq(0xb40),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x700),
- .end = evt2irq(0x760),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb00),
- .end = evt2irq(0xb20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7724_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae0_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7724_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae1_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C0 */
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-/* I2C1 */
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd80),
- .end = evt2irq(0xde0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
- .name = "VPU5F",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
- .name = "VEU3F0",
- .version = "0",
- .irq = evt2irq(0xc60),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU3F0",
- .start = 0xfe920000,
- .end = 0xfe9200cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
- .name = "VEU3F1",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU3F1",
- .start = 0xfe924000,
- .end = 0xfe9240cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-/* BEU0 */
-static struct uio_info beu0_platform_data = {
- .name = "BEU0",
- .version = "0",
- .irq = evt2irq(0x8A0),
-};
-
-static struct resource beu0_resources[] = {
- [0] = {
- .name = "BEU0",
- .start = 0xfe930000,
- .end = 0xfe933400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 6,
- .dev = {
- .platform_data = &beu0_platform_data,
- },
- .resource = beu0_resources,
- .num_resources = ARRAY_SIZE(beu0_resources),
-};
-
-/* BEU1 */
-static struct uio_info beu1_platform_data = {
- .name = "BEU1",
- .version = "0",
- .irq = evt2irq(0xA00),
-};
-
-static struct resource beu1_resources[] = {
- [0] = {
- .name = "BEU1",
- .start = 0xfe940000,
- .end = 0xfe943400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 7,
- .dev = {
- .platform_data = &beu1_platform_data,
- },
- .resource = beu1_resources,
- .num_resources = ARRAY_SIZE(beu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfe980000,
- .end = 0xfe9902d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 3,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
- .name = "SPU2DSP0",
- .version = "0",
- .irq = evt2irq(0xcc0),
-};
-
-static struct resource spu0_resources[] = {
- [0] = {
- .name = "SPU2DSP0",
- .start = 0xFE200000,
- .end = 0xFE2FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 4,
- .dev = {
- .platform_data = &spu0_platform_data,
- },
- .resource = spu0_resources,
- .num_resources = ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
- .name = "SPU2DSP1",
- .version = "0",
- .irq = evt2irq(0xce0),
-};
-
-static struct resource spu1_resources[] = {
- [0] = {
- .name = "SPU2DSP1",
- .start = 0xFE300000,
- .end = 0xFE3FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 5,
- .dev = {
- .platform_data = &spu1_platform_data,
- },
- .resource = spu1_resources,
- .num_resources = ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7724_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
- &rtc_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
- &beu0_device,
- &beu1_device,
- &jpu_device,
- &spu0_device,
- &spu1_device,
-};
-
-static int __init sh7724_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
- platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
- platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
-
- return platform_add_devices(sh7724_devices,
- ARRAY_SIZE(sh7724_devices));
-}
-arch_initcall(sh7724_devices_setup);
-
-static struct platform_device *sh7724_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7724_early_devices,
- ARRAY_SIZE(sh7724_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
- _2DG_TRI, _2DG_INI, _2DG_CEI,
- DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
- VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU,
- SCIFA3,
- VPU,
- TPU,
- CEU1,
- BEU1,
- USB0, USB1,
- ATAPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
- DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
- KEYSC,
- SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
- VEU0,
- MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- SPU_SPUI0, SPU_SPUI1,
- SCIFA4,
- ICB,
- ETHI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- CMT,
- TSIF,
- FSI,
- SCIFA5,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA,
- JPU,
- _2DDMAC,
- MMC_MMC2I, MMC_MMC3I,
- LCDC,
- TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, _2DG, DMAC0A, VIO, USB, RTC,
- DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0, 0x700),
- INTC_VECT(DMAC1A_DEI1, 0x720),
- INTC_VECT(DMAC1A_DEI2, 0x740),
- INTC_VECT(DMAC1A_DEI3, 0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0, 0x800),
- INTC_VECT(DMAC0A_DEI1, 0x820),
- INTC_VECT(DMAC0A_DEI2, 0x840),
- INTC_VECT(DMAC0A_DEI3, 0x860),
-
- INTC_VECT(VIO_CEU0, 0x880),
- INTC_VECT(VIO_BEU0, 0x8A0),
- INTC_VECT(VIO_VEU1, 0x8C0),
- INTC_VECT(VIO_VOU, 0x8E0),
-
- INTC_VECT(SCIFA3, 0x900),
- INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9A0),
- INTC_VECT(CEU1, 0x9E0),
- INTC_VECT(BEU1, 0xA00),
- INTC_VECT(USB0, 0xA20),
- INTC_VECT(USB1, 0xA40),
- INTC_VECT(ATAPI, 0xA60),
-
- INTC_VECT(RTC_ATI, 0xA80),
- INTC_VECT(RTC_PRI, 0xAA0),
- INTC_VECT(RTC_CUI, 0xAC0),
-
- INTC_VECT(DMAC1B_DEI4, 0xB00),
- INTC_VECT(DMAC1B_DEI5, 0xB20),
- INTC_VECT(DMAC1B_DADERR, 0xB40),
-
- INTC_VECT(DMAC0B_DEI4, 0xB80),
- INTC_VECT(DMAC0B_DEI5, 0xBA0),
- INTC_VECT(DMAC0B_DADERR, 0xBC0),
-
- INTC_VECT(KEYSC, 0xBE0),
- INTC_VECT(SCIF_SCIF0, 0xC00),
- INTC_VECT(SCIF_SCIF1, 0xC20),
- INTC_VECT(SCIF_SCIF2, 0xC40),
- INTC_VECT(VEU0, 0xC60),
- INTC_VECT(MSIOF_MSIOFI0, 0xC80),
- INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
- INTC_VECT(SPU_SPUI0, 0xCC0),
- INTC_VECT(SPU_SPUI1, 0xCE0),
- INTC_VECT(SCIFA4, 0xD00),
-
- INTC_VECT(ICB, 0xD20),
- INTC_VECT(ETHI, 0xD60),
-
- INTC_VECT(I2C1_ALI, 0xD80),
- INTC_VECT(I2C1_TACKI, 0xDA0),
- INTC_VECT(I2C1_WAITI, 0xDC0),
- INTC_VECT(I2C1_DTEI, 0xDE0),
-
- INTC_VECT(I2C0_ALI, 0xE00),
- INTC_VECT(I2C0_TACKI, 0xE20),
- INTC_VECT(I2C0_WAITI, 0xE40),
- INTC_VECT(I2C0_DTEI, 0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
- INTC_VECT(SDHI0, 0xEE0),
-
- INTC_VECT(CMT, 0xF00),
- INTC_VECT(TSIF, 0xF20),
- INTC_VECT(FSI, 0xF80),
- INTC_VECT(SCIFA5, 0xFA0),
-
- INTC_VECT(TMU0_TUNI0, 0x400),
- INTC_VECT(TMU0_TUNI1, 0x420),
- INTC_VECT(TMU0_TUNI2, 0x440),
-
- INTC_VECT(IRDA, 0x480),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(JPU, 0x560),
- INTC_VECT(_2DDMAC, 0x4A0),
-
- INTC_VECT(MMC_MMC2I, 0x5A0),
- INTC_VECT(MMC_MMC3I, 0x5C0),
-
- INTC_VECT(LCDC, 0xF40),
-
- INTC_VECT(TMU1_TUNI0, 0x920),
- INTC_VECT(TMU1_TUNI1, 0x940),
- INTC_VECT(TMU1_TUNI2, 0x960),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
- INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI),
- INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU),
- INTC_GROUP(USB, USB0, USB1),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
- INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
- DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, ATAPI, ETHI, 0, SCIFA3 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
- SPU_SPUI1, SPU_SPUI0, BEU1, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
- JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
- VEU0, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, ICB, SCIFA4,
- CEU1, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA5, FSI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
- 0, RTC_CUI, RTC_PRI, RTC_ATI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, _2DG_CEI, _2DG_INI, _2DG_TRI,
- 0, TPU, 0, TSIF } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0, 0, MMC_MMC3I, MMC_MMC2I, 0, 0, 0, _2DDMAC } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
- TMU0_TUNI2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, DMAC1A, BEU1 } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
- TMU1_TUNI2, SPU } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMCIF, 0, ATAPI } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA3, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC0B, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
- SCIF_SCIF2, VEU0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- I2C1, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA4, ICB, TSIF, _2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU1, ETHI, FSI, SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, 0, SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA5, 0, TPU, _2DDMAC } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7724",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct {
- /* BSC */
- unsigned long mmselr;
- unsigned long cs0bcr;
- unsigned long cs4bcr;
- unsigned long cs5abcr;
- unsigned long cs5bbcr;
- unsigned long cs6abcr;
- unsigned long cs6bbcr;
- unsigned long cs4wcr;
- unsigned long cs5awcr;
- unsigned long cs5bwcr;
- unsigned long cs6awcr;
- unsigned long cs6bwcr;
- /* INTC */
- unsigned short ipra;
- unsigned short iprb;
- unsigned short iprc;
- unsigned short iprd;
- unsigned short ipre;
- unsigned short iprf;
- unsigned short iprg;
- unsigned short iprh;
- unsigned short ipri;
- unsigned short iprj;
- unsigned short iprk;
- unsigned short iprl;
- unsigned char imr0;
- unsigned char imr1;
- unsigned char imr2;
- unsigned char imr3;
- unsigned char imr4;
- unsigned char imr5;
- unsigned char imr6;
- unsigned char imr7;
- unsigned char imr8;
- unsigned char imr9;
- unsigned char imr10;
- unsigned char imr11;
- unsigned char imr12;
- /* RWDT */
- unsigned short rwtcnt;
- unsigned short rwtcsr;
- /* CPG */
- unsigned long irdaclk;
- unsigned long spuclk;
-} sh7724_rstandby_state;
-
-static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
- sh7724_rstandby_state.mmselr |= 0xa5a50000;
- sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
- sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
- sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
- sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
- sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
- sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
- sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
- sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
- sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
- sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
- sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
-
- /* INTC */
- sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
- sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
- sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
- sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
- sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
- sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
- sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
- sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
- sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
- sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
- sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
- sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
- sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
- sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
- sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
- sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
- sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
- sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
- sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
- sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
- sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
- sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
- sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
- sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
- sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
-
- /* RWDT */
- sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
- sh7724_rstandby_state.rwtcnt |= 0x5a00;
- sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
- sh7724_rstandby_state.rwtcsr |= 0xa500;
- __raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
-
- /* CPG */
- sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
- sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- __raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
- __raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
- __raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
- __raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
- __raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
- __raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
- __raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
- __raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
- __raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
- __raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
- __raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
- __raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
-
- /* INTC */
- __raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
- __raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
- __raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
- __raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
- __raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
- __raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
- __raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
- __raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
- __raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
- __raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
- __raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
- __raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
- __raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
- __raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
- __raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
- __raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
- __raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
- __raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
- __raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
- __raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
- __raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
- __raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
- __raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
- __raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
- __raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
-
- /* RWDT */
- __raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
- __raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
-
- /* CPG */
- __raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
- __raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block sh7724_pre_sleep_notifier = {
- .notifier_call = sh7724_pre_sleep_notifier_call,
- .priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
-};
-
-static struct notifier_block sh7724_post_sleep_notifier = {
- .notifier_call = sh7724_post_sleep_notifier_call,
- .priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
-};
-
-static int __init sh7724_sleep_setup(void)
-{
- atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
- &sh7724_pre_sleep_notifier);
-
- atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
- &sh7724_post_sleep_notifier);
- return 0;
-}
-arch_initcall(sh7724_sleep_setup);
-
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
deleted file mode 100644
index 9911da794358d0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+++ /dev/null
@@ -1,621 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/setup-sh7734.c
- *
- * SH7734 Setup
- *
- * Copyright (C) 2011,2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011,2012 Renesas Solutions Corp.
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/irq.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7734.h>
-
-/* SCIF */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe41000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe42000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x920)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffe44000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x940)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .name = "rtc",
- .start = 0xFFFC5000,
- .end = 0xFFFC5000 + 0x26 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0xC00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C 0 */
-static struct resource i2c0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0xFFC70000,
- .end = 0xFFC7000A - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c0_device = {
- .name = "i2c-sh7734",
- .id = 0,
- .num_resources = ARRAY_SIZE(i2c0_resources),
- .resource = i2c0_resources,
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x500)),
- DEFINE_RES_IRQ(evt2irq(0x520)),
- DEFINE_RES_IRQ(evt2irq(0x540)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7734_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &rtc_device,
-};
-
-static struct platform_device *sh7734_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7734_early_devices,
- ARRAY_SIZE(sh7734_early_devices));
-}
-
-#define GROUP 0
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3,
- DU,
- TMU00, TMU10, TMU20, TMU21,
- TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU70, TMU80,
- RESET_WDT,
- USB,
- HUDI,
- SHDMAC,
- SSI0, SSI1, SSI2, SSI3,
- VIN0,
- RGPVG,
- _2DG,
- MMC,
- HSPI,
- LBSCATA,
- I2C0,
- RCAN0,
- MIMLB,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- LBSCDMAC0, LBSCDMAC1, LBSCDMAC2,
- RCAN1,
- SDHI0, SDHI1,
- IEBUS,
- HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22, HPBDMAC23_25_27_28,
- RTC,
- VIN1,
- LCDC,
- SRC0, SRC1,
- GETHER,
- SDHI2,
- GPIO0_3, GPIO4_5,
- STIF0, STIF1,
- ADMAC,
- HIF,
- FLCTL,
- ADC,
- MTU2,
- RSPI,
- QSPI,
- HSCIF,
- VEU3F_VE3,
-
- /* Group */
- /* Mask */
- STIF_M,
- GPIO_M,
- HPBDMAC_M,
- LBSCDMAC_M,
- RCAN_M,
- SRC_M,
- SCIF_M,
- LCDC_M,
- _2DG_M,
- VIN_M,
- TMU_3_M,
- TMU_0_M,
-
- /* Priority */
- RCAN_P,
- LBSCDMAC_P,
-
- /* Common */
- SDHI,
- SSI,
- SPI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(DU, 0x3E0),
- INTC_VECT(TMU00, 0x400),
- INTC_VECT(TMU10, 0x420),
- INTC_VECT(TMU20, 0x440),
- INTC_VECT(TMU30, 0x480),
- INTC_VECT(TMU40, 0x4A0),
- INTC_VECT(TMU50, 0x4C0),
- INTC_VECT(TMU51, 0x4E0),
- INTC_VECT(TMU60, 0x500),
- INTC_VECT(TMU70, 0x520),
- INTC_VECT(TMU80, 0x540),
- INTC_VECT(RESET_WDT, 0x560),
- INTC_VECT(USB, 0x580),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(SHDMAC, 0x620),
- INTC_VECT(SSI0, 0x6C0),
- INTC_VECT(SSI1, 0x6E0),
- INTC_VECT(SSI2, 0x700),
- INTC_VECT(SSI3, 0x720),
- INTC_VECT(VIN0, 0x740),
- INTC_VECT(RGPVG, 0x760),
- INTC_VECT(_2DG, 0x780),
- INTC_VECT(MMC, 0x7A0),
- INTC_VECT(HSPI, 0x7E0),
- INTC_VECT(LBSCATA, 0x840),
- INTC_VECT(I2C0, 0x860),
- INTC_VECT(RCAN0, 0x880),
- INTC_VECT(SCIF0, 0x8A0),
- INTC_VECT(SCIF1, 0x8C0),
- INTC_VECT(SCIF2, 0x900),
- INTC_VECT(SCIF3, 0x920),
- INTC_VECT(SCIF4, 0x940),
- INTC_VECT(SCIF5, 0x960),
- INTC_VECT(LBSCDMAC0, 0x9E0),
- INTC_VECT(LBSCDMAC1, 0xA00),
- INTC_VECT(LBSCDMAC2, 0xA20),
- INTC_VECT(RCAN1, 0xA60),
- INTC_VECT(SDHI0, 0xAE0),
- INTC_VECT(SDHI1, 0xB00),
- INTC_VECT(IEBUS, 0xB20),
- INTC_VECT(HPBDMAC0_3, 0xB60),
- INTC_VECT(HPBDMAC4_10, 0xB80),
- INTC_VECT(HPBDMAC11_18, 0xBA0),
- INTC_VECT(HPBDMAC19_22, 0xBC0),
- INTC_VECT(HPBDMAC23_25_27_28, 0xBE0),
- INTC_VECT(RTC, 0xC00),
- INTC_VECT(VIN1, 0xC20),
- INTC_VECT(LCDC, 0xC40),
- INTC_VECT(SRC0, 0xC60),
- INTC_VECT(SRC1, 0xC80),
- INTC_VECT(GETHER, 0xCA0),
- INTC_VECT(SDHI2, 0xCC0),
- INTC_VECT(GPIO0_3, 0xCE0),
- INTC_VECT(GPIO4_5, 0xD00),
- INTC_VECT(STIF0, 0xD20),
- INTC_VECT(STIF1, 0xD40),
- INTC_VECT(ADMAC, 0xDA0),
- INTC_VECT(HIF, 0xDC0),
- INTC_VECT(FLCTL, 0xDE0),
- INTC_VECT(ADC, 0xE00),
- INTC_VECT(MTU2, 0xE20),
- INTC_VECT(RSPI, 0xE40),
- INTC_VECT(QSPI, 0xE60),
- INTC_VECT(HSCIF, 0xFC0),
- INTC_VECT(VEU3F_VE3, 0xF40),
-};
-
-static struct intc_group groups[] __initdata = {
- /* Common */
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2),
- INTC_GROUP(SPI, HSPI, RSPI, QSPI),
- INTC_GROUP(SSI, SSI0, SSI1, SSI2, SSI3),
-
- /* Mask group */
- INTC_GROUP(STIF_M, STIF0, STIF1), /* 22 */
- INTC_GROUP(GPIO_M, GPIO0_3, GPIO4_5), /* 21 */
- INTC_GROUP(HPBDMAC_M, HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18,
- HPBDMAC19_22, HPBDMAC23_25_27_28), /* 19 */
- INTC_GROUP(LBSCDMAC_M, LBSCDMAC0, LBSCDMAC1, LBSCDMAC2), /* 18 */
- INTC_GROUP(RCAN_M, RCAN0, RCAN1, IEBUS), /* 17 */
- INTC_GROUP(SRC_M, SRC0, SRC1), /* 16 */
- INTC_GROUP(SCIF_M, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- HSCIF), /* 14 */
- INTC_GROUP(LCDC_M, LCDC, MIMLB), /* 13 */
- INTC_GROUP(_2DG_M, _2DG, RGPVG), /* 12 */
- INTC_GROUP(VIN_M, VIN0, VIN1), /* 10 */
- INTC_GROUP(TMU_3_M, TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU60, TMU70, TMU80), /* 2 */
- INTC_GROUP(TMU_0_M, TMU00, TMU10, TMU20, TMU21), /* 1 */
-
- /* Priority group*/
- INTC_GROUP(RCAN_P, RCAN0, RCAN1), /* INT2PRI5 */
- INTC_GROUP(LBSCDMAC_P, LBSCDMAC0, LBSCDMAC1), /* INT2PRI5 */
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xFF804040, 0xFF804044, 32, /* INT2MSKRG / INT2MSKCR */
- { 0,
- VEU3F_VE3,
- SDHI, /* SDHI 0-2 */
- ADMAC,
- FLCTL,
- RESET_WDT,
- HIF,
- ADC,
- MTU2,
- STIF_M, /* STIF 0,1 */
- GPIO_M, /* GPIO 0-5*/
- GETHER,
- HPBDMAC_M, /* HPBDMAC 0_3 - 23_25_27_28 */
- LBSCDMAC_M, /* LBSCDMAC 0 - 2 */
- RCAN_M, /* RCAN, IEBUS */
- SRC_M, /* SRC 0,1 */
- LBSCATA,
- SCIF_M, /* SCIF 0-5, HSCIF */
- LCDC_M, /* LCDC, MIMLB */
- _2DG_M, /* 2DG, RGPVG */
- SPI, /* HSPI, RSPI, QSPI */
- VIN_M, /* VIN0, 1 */
- SSI, /* SSI 0-3 */
- USB,
- SHDMAC,
- HUDI,
- MMC,
- RTC,
- I2C0, /* I2C */ /* I2C 0, 1*/
- TMU_3_M, /* TMU30 - TMU80 */
- TMU_0_M, /* TMU00 - TMU21 */
- DU } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xFF804000, 0, 32, 8, /* INT2PRI0 */
- { DU, TMU00, TMU10, TMU20 } },
- { 0xFF804004, 0, 32, 8, /* INT2PRI1 */
- { TMU30, TMU60, RTC, SDHI } },
- { 0xFF804008, 0, 32, 8, /* INT2PRI2 */
- { HUDI, SHDMAC, USB, SSI } },
- { 0xFF80400C, 0, 32, 8, /* INT2PRI3 */
- { VIN0, SPI, _2DG, LBSCATA } },
- { 0xFF804010, 0, 32, 8, /* INT2PRI4 */
- { SCIF0, SCIF3, HSCIF, LCDC } },
- { 0xFF804014, 0, 32, 8, /* INT2PRI5 */
- { RCAN_P, LBSCDMAC_P, LBSCDMAC2, MMC } },
- { 0xFF804018, 0, 32, 8, /* INT2PRI6 */
- { HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22 } },
- { 0xFF80401C, 0, 32, 8, /* INT2PRI7 */
- { HPBDMAC23_25_27_28, I2C0, SRC0, SRC1 } },
- { 0xFF804020, 0, 32, 8, /* INT2PRI8 */
- { 0 /* ADIF */, VIN1, RESET_WDT, HIF } },
- { 0xFF804024, 0, 32, 8, /* INT2PRI9 */
- { ADMAC, FLCTL, GPIO0_3, GPIO4_5 } },
- { 0xFF804028, 0, 32, 8, /* INT2PRI10 */
- { STIF0, STIF1, VEU3F_VE3, GETHER } },
- { 0xFF80402C, 0, 32, 8, /* INT2PRI11 */
- { MTU2, RGPVG, MIMLB, IEBUS } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7734", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq3210_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2C0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg irq3210_sense_registers[] __initdata = {
- { 0xFF80201C, 32, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_ack_registers[] __initdata = {
- { 0xFF802024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_mask_registers[] __initdata = {
- { 0xFF802044, 0xFF802064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_prio_reg irq3210_prio_registers[] __initdata = {
- { 0xFF802010, 0, 32, 4, /* INTPRI */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq3210, "sh7734-irq3210",
- irq3210_vectors, NULL,
- irq3210_mask_registers, irq3210_prio_registers,
- irq3210_sense_registers, irq3210_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl3210[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl3210, "sh7734-irl3210",
- vectors_irl3210, NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xFF802000
-#define INTC_INTMSK0 0xFF802044
-#define INTC_INTMSK1 0xFF802048
-#define INTC_INTMSKCLR0 0xFF802064
-#define INTC_INTMSKCLR1 0xFF802068
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 */
- __raw_writel(0xF0000000, INTC_INTMSK0);
-
- /* disable IRL3-0 */
- __raw_writel(0x80000000, INTC_INTMSK1);
-
- /* select IRL mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00800000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode (LVLMODE)" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq3210);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xf0000000, INTC_INTMSKCLR0);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR0);
- register_intc_controller(&intc_desc_irl3210);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
deleted file mode 100644
index 67e330b7ea4621..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ /dev/null
@@ -1,1242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 Setup
- *
- * Copyright (C) 2009, 2011 Renesas Solutions Corp.
- *
- * based on setup-sh7785.c : Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <cpu/sh7757.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe4b0000, 0x100), /* SCIF2 */
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe4c0000, 0x100), /* SCIF3 */
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfe4d0000, 0x100), /* SCIF4 */
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfe430000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = 0xfe002000,
- .end = 0xfe0020ff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
- [1] = {
- .start = evt2irq(0xcc0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SDHI_TX,
- .addr = 0x1fe50030,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_SDHI_RX,
- .addr = 0x1fe50030,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc6,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- .addr = 0x1fcb0034,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd3,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- .addr = 0x1fcb0034,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd7,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0x1f4b000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0x1f4b0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0x1f4c000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0x1f4c0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0x1f4d000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0x1f4d0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_TX,
- .addr = 0xfe480004,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_RX,
- .addr = 0xfe480004,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC0_TX,
- .addr = 0x1e500012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC0_RX,
- .addr = 0x1e500013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_TX,
- .addr = 0x1e510012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_RX,
- .addr = 0x1e510013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_TX,
- .addr = 0x1e520012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa1,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_RX,
- .addr = 0x1e520013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa2,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_TX,
- .addr = 0x1e530012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa9,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_RX,
- .addr = 0x1e530013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xaf,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_TX,
- .addr = 0x1e540012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_RX,
- .addr = 0x1e540013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc6,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC5_TX,
- .addr = 0x1e550012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC5_RX,
- .addr = 0x1e550013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_TX,
- .addr = 0x1e560012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_RX,
- .addr = 0x1e560013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_TX,
- .addr = 0x1e570012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_RX,
- .addr = 0x1e570013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_TX,
- .addr = 0x1e580012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x45,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_RX,
- .addr = 0x1e580013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x46,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_TX,
- .addr = 0x1e590012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x51,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_RX,
- .addr = 0x1e590013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x52,
- },
-};
-
-static const struct sh_dmae_channel sh7757_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .slave = sh7757_dmae0_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae0_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .slave = sh7757_dmae1_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae1_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma2_platform_data = {
- .slave = sh7757_dmae2_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae2_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma3_platform_data = {
- .slave = sh7757_dmae3_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae3_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* channel 0 to 5 */
-static struct resource sh7757_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff608020,
- .end = 0xff60808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff609000,
- .end = 0xff60900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 6 to 11 */
-static struct resource sh7757_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff618020,
- .end = 0xff61808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff619000,
- .end = 0xff61900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 4 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 5 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 6 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 7 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 8 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 9 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 10 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 11 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 12 to 17 */
-static struct resource sh7757_dmae2_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff708020,
- .end = 0xff70808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff709000,
- .end = 0xff70900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a60),
- .end = evt2irq(0x2a60),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 12 to 16 */
- .start = evt2irq(0x2400),
- .end = evt2irq(0x2480),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 17 */
- .start = evt2irq(0x24e0),
- .end = evt2irq(0x24e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* channel 18 to 23 */
-static struct resource sh7757_dmae3_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff718020,
- .end = 0xff71808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff719000,
- .end = 0xff71900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a80),
- .end = evt2irq(0x2a80),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 18 to 22 */
- .start = evt2irq(0x2500),
- .end = evt2irq(0x2580),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 23 */
- .start = evt2irq(0x2600),
- .end = evt2irq(0x2600),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7757_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7757_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device dma2_device = {
- .name = "sh-dma-engine",
- .id = 2,
- .resource = sh7757_dmae2_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae2_resources),
- .dev = {
- .platform_data = &dma2_platform_data,
- },
-};
-
-static struct platform_device dma3_device = {
- .name = "sh-dma-engine",
- .id = 3,
- .resource = sh7757_dmae3_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae3_resources),
- .dev = {
- .platform_data = &dma3_platform_data,
- },
-};
-
-static struct platform_device spi0_device = {
- .name = "sh_spi",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(spi0_resources),
- .resource = spi0_resources,
-};
-
-static struct resource spi1_resources[] = {
- {
- .start = 0xffd8ee70,
- .end = 0xffd8eeff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- {
- .start = evt2irq(0x8c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device spi1_device = {
- .name = "sh_spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(spi1_resources),
- .resource = spi1_resources,
-};
-
-static struct resource rspi_resources[] = {
- {
- .start = 0xfe480000,
- .end = 0xfe4800ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = evt2irq(0x1d80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rspi_device = {
- .name = "rspi",
- .id = 2,
- .num_resources = ARRAY_SIZE(rspi_resources),
- .resource = rspi_resources,
-};
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = 0xfe4f1000,
- .end = 0xfe4f10ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xfe4f1800,
- .end = 0xfe4f18ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7757_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
- &dma0_device,
- &dma1_device,
- &dma2_device,
- &dma3_device,
- &spi0_device,
- &spi1_device,
- &rspi_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-static int __init sh7757_devices_setup(void)
-{
- return platform_add_devices(sh7757_devices,
- ARRAY_SIZE(sh7757_devices));
-}
-arch_initcall(sh7757_devices_setup);
-
-static struct platform_device *sh7757_early_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7757_early_devices,
- ARRAY_SIZE(sh7757_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-
- SDHI, DVC,
- IRQ8, IRQ9, IRQ11, IRQ10, IRQ12, IRQ13, IRQ14, IRQ15,
- TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- HUDI,
- ARC4,
- DMAC0_5, DMAC6_7, DMAC8_11,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4,
- USB0, USB1,
- JMC,
- SPI0, SPI1,
- TMR01, TMR23, TMR45,
- FRT,
- LPC, LPC5, LPC6, LPC7, LPC8,
- PECI0, PECI1, PECI2, PECI3, PECI4, PECI5,
- ETHERC,
- ADC0, ADC1,
- SIM,
- IIC0_0, IIC0_1, IIC0_2, IIC0_3,
- IIC1_0, IIC1_1, IIC1_2, IIC1_3,
- IIC2_0, IIC2_1, IIC2_2, IIC2_3,
- IIC3_0, IIC3_1, IIC3_2, IIC3_3,
- IIC4_0, IIC4_1, IIC4_2, IIC4_3,
- IIC5_0, IIC5_1, IIC5_2, IIC5_3,
- IIC6_0, IIC6_1, IIC6_2, IIC6_3,
- IIC7_0, IIC7_1, IIC7_2, IIC7_3,
- IIC8_0, IIC8_1, IIC8_2, IIC8_3,
- IIC9_0, IIC9_1, IIC9_2, IIC9_3,
- ONFICTL,
- MMC1, MMC2,
- ECCU,
- PCIC,
- G200,
- RSPI,
- SGPIO,
- DMINT12, DMINT13, DMINT14, DMINT15, DMINT16, DMINT17, DMINT18, DMINT19,
- DMINT20, DMINT21, DMINT22, DMINT23,
- DDRECC,
- TSIP,
- PCIE_BRIDGE,
- WDT0B, WDT1B, WDT2B, WDT3B, WDT4B, WDT5B, WDT6B, WDT7B, WDT8B,
- GETHER0, GETHER1, GETHER2,
- PBIA, PBIB, PBIC,
- DMAE2, DMAE3,
- SERMUX2, SERMUX3,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
- INTC_VECT(SDHI, 0x4c0),
- INTC_VECT(DVC, 0x4e0),
- INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
- INTC_VECT(IRQ10, 0x540),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(ARC4, 0x620),
- INTC_VECT(DMAC0_5, 0x640), INTC_VECT(DMAC0_5, 0x660),
- INTC_VECT(DMAC0_5, 0x680), INTC_VECT(DMAC0_5, 0x6a0),
- INTC_VECT(DMAC0_5, 0x6c0),
- INTC_VECT(IRQ11, 0x6e0),
- INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
- INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
- INTC_VECT(DMAC0_5, 0x780), INTC_VECT(DMAC0_5, 0x7a0),
- INTC_VECT(DMAC6_7, 0x7c0), INTC_VECT(DMAC6_7, 0x7e0),
- INTC_VECT(USB0, 0x840),
- INTC_VECT(IRQ12, 0x880),
- INTC_VECT(JMC, 0x8a0),
- INTC_VECT(SPI1, 0x8c0),
- INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
- INTC_VECT(USB1, 0x920),
- INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
- INTC_VECT(TMR45, 0xa40),
- INTC_VECT(FRT, 0xa80),
- INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
- INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
- INTC_VECT(LPC, 0xb20),
- INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
- INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
- INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
- INTC_VECT(PECI0, 0xc00), INTC_VECT(PECI1, 0xc20),
- INTC_VECT(PECI2, 0xc40),
- INTC_VECT(IRQ15, 0xc60),
- INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
- INTC_VECT(SPI0, 0xcc0),
- INTC_VECT(ADC1, 0xce0),
- INTC_VECT(DMAC8_11, 0xd00), INTC_VECT(DMAC8_11, 0xd20),
- INTC_VECT(DMAC8_11, 0xd40), INTC_VECT(DMAC8_11, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(ADC0, 0xe60),
- INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
- INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
- INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
- INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
- INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
- INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
- INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
- INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
- INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
- INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
- INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
- INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
- INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
- INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
- INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
- INTC_VECT(IIC6_2, 0x1920),
- INTC_VECT(ONFICTL, 0x1960),
- INTC_VECT(IIC6_3, 0x1980),
- INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
- INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
- INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
- INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
- INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
- INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
- INTC_VECT(MMC1, 0x1c60), INTC_VECT(MMC2, 0x1c80),
- INTC_VECT(ECCU, 0x1cc0),
- INTC_VECT(PCIC, 0x1ce0),
- INTC_VECT(G200, 0x1d00),
- INTC_VECT(RSPI, 0x1d80), INTC_VECT(RSPI, 0x1da0),
- INTC_VECT(RSPI, 0x1dc0), INTC_VECT(RSPI, 0x1de0),
- INTC_VECT(PECI3, 0x1ec0), INTC_VECT(PECI4, 0x1ee0),
- INTC_VECT(PECI5, 0x1f00),
- INTC_VECT(SGPIO, 0x1f80), INTC_VECT(SGPIO, 0x1fa0),
- INTC_VECT(SGPIO, 0x1fc0),
- INTC_VECT(DMINT12, 0x2400), INTC_VECT(DMINT13, 0x2420),
- INTC_VECT(DMINT14, 0x2440), INTC_VECT(DMINT15, 0x2460),
- INTC_VECT(DMINT16, 0x2480), INTC_VECT(DMINT17, 0x24e0),
- INTC_VECT(DMINT18, 0x2500), INTC_VECT(DMINT19, 0x2520),
- INTC_VECT(DMINT20, 0x2540), INTC_VECT(DMINT21, 0x2560),
- INTC_VECT(DMINT22, 0x2580), INTC_VECT(DMINT23, 0x2600),
- INTC_VECT(DDRECC, 0x2620),
- INTC_VECT(TSIP, 0x2640),
- INTC_VECT(PCIE_BRIDGE, 0x27c0),
- INTC_VECT(WDT0B, 0x2800), INTC_VECT(WDT1B, 0x2820),
- INTC_VECT(WDT2B, 0x2840), INTC_VECT(WDT3B, 0x2860),
- INTC_VECT(WDT4B, 0x2880), INTC_VECT(WDT5B, 0x28a0),
- INTC_VECT(WDT6B, 0x28c0), INTC_VECT(WDT7B, 0x28e0),
- INTC_VECT(WDT8B, 0x2900),
- INTC_VECT(GETHER0, 0x2960), INTC_VECT(GETHER1, 0x2980),
- INTC_VECT(GETHER2, 0x29a0),
- INTC_VECT(PBIA, 0x2a00), INTC_VECT(PBIB, 0x2a20),
- INTC_VECT(PBIC, 0x2a40),
- INTC_VECT(DMAE2, 0x2a60), INTC_VECT(DMAE3, 0x2a80),
- INTC_VECT(SERMUX2, 0x2aa0), INTC_VECT(SERMUX3, 0x2b40),
- INTC_VECT(LPC5, 0x2b60), INTC_VECT(LPC6, 0x2b80),
- INTC_VECT(LPC7, 0x2c00), INTC_VECT(LPC8, 0x2c20),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, DMAC8_11, 0, PECI0, LPC, FRT, 0, TMR45,
- TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0_5,
- HUDI, 0, 0, SCIF3, SCIF2, SDHI, TMU345, TMU012
- } },
-
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
- IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
- ADC1, 0, DMAC6_7, ADC0, SPI0, SIM, PECI2, PECI1,
- ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
- } },
-
- { 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
- { IIC4_1, IIC4_2, IIC5_0, ONFICTL, 0, 0, SGPIO, 0,
- 0, G200, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
- IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
- IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, 0, IIC2_2
- } },
-
- { 0xffd100d0, 0xffd100d4, 32, /* INT2MSKR3 / INT2MSKCR3 */
- { MMC1, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, PECI5, MMC2,
- IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
- PCIC, 0, IIC4_0, 0, ECCU, RSPI, 0, IIC9_3,
- IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
- } },
-
- { 0xffd20038, 0xffd2003c, 32, /* INT2MSKR4 / INT2MSKCR4 */
- { WDT0B, WDT1B, WDT3B, GETHER0, 0, 0, 0, 0,
- 0, 0, 0, LPC7, SERMUX2, DMAE3, DMAE2, PBIC,
- PBIB, PBIA, GETHER1, DMINT12, DMINT13, DMINT14, DMINT15, TSIP,
- DMINT23, 0, DMINT21, LPC6, 0, DMINT16, 0, DMINT22
- } },
-
- { 0xffd200d0, 0xffd200d4, 32, /* INT2MSKR5 / INT2MSKCR5 */
- { 0, WDT8B, WDT7B, WDT4B, 0, DMINT20, 0, 0,
- DMINT19, DMINT18, LPC5, SERMUX3, WDT2B, GETHER2, 0, 0,
- 0, 0, PCIE_BRIDGE, 0, 0, 0, 0, LPC8,
- DDRECC, 0, WDT6B, WDT5B, 0, 0, 0, DMINT17
- } },
-};
-
-#define INTPRI 0xffd00010
-#define INT2PRI0 0xffd40000
-#define INT2PRI1 0xffd40004
-#define INT2PRI2 0xffd40008
-#define INT2PRI3 0xffd4000c
-#define INT2PRI4 0xffd40010
-#define INT2PRI5 0xffd40014
-#define INT2PRI6 0xffd40018
-#define INT2PRI7 0xffd4001c
-#define INT2PRI8 0xffd400a0
-#define INT2PRI9 0xffd400a4
-#define INT2PRI10 0xffd400a8
-#define INT2PRI11 0xffd400ac
-#define INT2PRI12 0xffd400b0
-#define INT2PRI13 0xffd400b4
-#define INT2PRI14 0xffd400b8
-#define INT2PRI15 0xffd400bc
-#define INT2PRI16 0xffd10000
-#define INT2PRI17 0xffd10004
-#define INT2PRI18 0xffd10008
-#define INT2PRI19 0xffd1000c
-#define INT2PRI20 0xffd10010
-#define INT2PRI21 0xffd10014
-#define INT2PRI22 0xffd10018
-#define INT2PRI23 0xffd1001c
-#define INT2PRI24 0xffd100a0
-#define INT2PRI25 0xffd100a4
-#define INT2PRI26 0xffd100a8
-#define INT2PRI27 0xffd100ac
-#define INT2PRI28 0xffd100b0
-#define INT2PRI29 0xffd100b4
-#define INT2PRI30 0xffd100b8
-#define INT2PRI31 0xffd100bc
-#define INT2PRI32 0xffd20000
-#define INT2PRI33 0xffd20004
-#define INT2PRI34 0xffd20008
-#define INT2PRI35 0xffd2000c
-#define INT2PRI36 0xffd20010
-#define INT2PRI37 0xffd20014
-#define INT2PRI38 0xffd20018
-#define INT2PRI39 0xffd2001c
-#define INT2PRI40 0xffd200a0
-#define INT2PRI41 0xffd200a4
-#define INT2PRI42 0xffd200a8
-#define INT2PRI43 0xffd200ac
-#define INT2PRI44 0xffd200b0
-#define INT2PRI45 0xffd200b4
-#define INT2PRI46 0xffd200b8
-#define INT2PRI47 0xffd200bc
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
- { INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
- { INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, 0, IRQ8 } },
- { INT2PRI3, 0, 32, 8, { HUDI, DMAC0_5, ADC0, IRQ9 } },
- { INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
- { INT2PRI5, 0, 32, 8, { TMR45, 0, FRT, LPC } },
- { INT2PRI6, 0, 32, 8, { PECI0, ETHERC, DMAC8_11, 0 } },
- { INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
- { INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
- { INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
- { INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2, PECI1 } },
- { INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC6_7, IRQ14 } },
- { INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
- { INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
-
- { INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
- { INT2PRI17, 0, 32, 8, { 0, 0, 0, IIC1_0 } },
- { INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
- { INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
- { INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
- { INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
- { INT2PRI22, 0, 32, 8, { IIC9_2, MMC2, G200, 0 } },
- { INT2PRI23, 0, 32, 8, { PECI5, SGPIO, IIC3_2, IIC5_1 } },
- { INT2PRI24, 0, 32, 8, { PECI4, PECI3, 0, IIC1_1 } },
- { INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
- { INT2PRI26, 0, 32, 8, { ECCU, RSPI, 0, IIC9_3 } },
- { INT2PRI27, 0, 32, 8, { PCIC, IIC6_0, IIC4_0, IIC6_1 } },
- { INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, MMC1, IIC6_2 } },
- { INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
- { INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, ONFICTL } },
- { INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
- { INT2PRI32, 0, 32, 8, { DMINT22, 0, 0, 0 } },
- { INT2PRI33, 0, 32, 8, { 0, 0, 0, DMINT16 } },
- { INT2PRI34, 0, 32, 8, { 0, LPC6, DMINT21, DMINT18 } },
- { INT2PRI35, 0, 32, 8, { DMINT23, TSIP, 0, DMINT19 } },
- { INT2PRI36, 0, 32, 8, { DMINT20, GETHER1, PBIA, PBIB } },
- { INT2PRI37, 0, 32, 8, { PBIC, DMAE2, DMAE3, SERMUX2 } },
- { INT2PRI38, 0, 32, 8, { LPC7, 0, 0, 0 } },
- { INT2PRI39, 0, 32, 8, { 0, 0, 0, WDT4B } },
- { INT2PRI40, 0, 32, 8, { 0, 0, 0, DMINT17 } },
- { INT2PRI41, 0, 32, 8, { DDRECC, 0, WDT6B, WDT5B } },
- { INT2PRI42, 0, 32, 8, { 0, 0, 0, LPC8 } },
- { INT2PRI43, 0, 32, 8, { 0, WDT7B, PCIE_BRIDGE, WDT8B } },
- { INT2PRI44, 0, 32, 8, { WDT2B, GETHER2, 0, 0 } },
- { INT2PRI45, 0, 32, 8, { 0, 0, LPC5, SERMUX3 } },
- { INT2PRI46, 0, 32, 8, { WDT0B, WDT1B, WDT3B, GETHER0 } },
- { INT2PRI47, 0, 32, 8, { DMINT12, DMINT13, DMINT14, DMINT15 } },
-};
-
-static struct intc_sense_reg sense_registers_irq8to15[] __initdata = {
- { 0xffd100f8, 32, 2, /* ICR2 */ { IRQ15, IRQ14, IRQ13, IRQ12,
- IRQ11, IRQ10, IRQ9, IRQ8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
- mask_registers, prio_registers,
- sense_registers_irq8to15);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
- INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
- INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
- INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
- INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
- INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
- INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
- INTC_VECT(IRL4_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
deleted file mode 100644
index b0608664785f50..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7763 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe08000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xffec8000,
- .end = 0xffec80ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc60),
- .end = evt2irq(0xc60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd88000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *sh7763_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7763_devices_setup(void)
-{
- return platform_add_devices(sh7763_devices,
- ARRAY_SIZE(sh7763_devices));
-}
-arch_initcall(sh7763_devices_setup);
-
-static struct platform_device *sh7763_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7763_early_devices,
- ARRAY_SIZE(sh7763_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
- USBH, USBF, TPU, PCC, MMCIF, SIM,
- TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
- SCIF2, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
- INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
- INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
- INTC_VECT(LCDC, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
- INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
- INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
- INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
- INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
- INTC_VECT(USBF, 0xca0),
- INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
- INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
- INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, 0,
- SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { 0, 0, 0, 0, 0, 0, SCIF2, USBF,
- 0, 0, STIF1, STIF0, 0, 0, USBH, GETHER,
- PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1,
- LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
- { 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } },
- { 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } },
- { 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } },
- { 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } },
- { 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } },
- { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
deleted file mode 100644
index 5efec6ceb04d5c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ /dev/null
@@ -1,571 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7770 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff923000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xff924000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xff925000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xff926000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa00)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xff927000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa20)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xff928000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa40)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xff929000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa60)),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xff92a000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa80)),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct plat_sci_port scif8_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif8_resources[] = {
- DEFINE_RES_MEM(0xff92b000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xaa0)),
-};
-
-static struct platform_device scif8_device = {
- .name = "sh-sci",
- .id = 8,
- .resource = scif8_resources,
- .num_resources = ARRAY_SIZE(scif8_resources),
- .dev = {
- .platform_data = &scif8_platform_data,
- },
-};
-
-static struct plat_sci_port scif9_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif9_resources[] = {
- DEFINE_RES_MEM(0xff92c000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xac0)),
-};
-
-static struct platform_device scif9_device = {
- .name = "sh-sci",
- .id = 9,
- .resource = scif9_resources,
- .num_resources = ARRAY_SIZE(scif9_resources),
- .dev = {
- .platform_data = &scif9_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
- DEFINE_RES_IRQ(evt2irq(0x500)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7770_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-static int __init sh7770_devices_setup(void)
-{
- return platform_add_devices(sh7770_devices,
- ARRAY_SIZE(sh7770_devices));
-}
-arch_initcall(sh7770_devices_setup);
-
-static struct platform_device *sh7770_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7770_early_devices,
- ARRAY_SIZE(sh7770_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-
- GPIO,
- TMU0, TMU1, TMU2, TMU2_TICPI,
- TMU3, TMU4, TMU5, TMU5_TICPI,
- TMU6, TMU7, TMU8,
- HAC, IPI, SPDIF, HUDI, I2C,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- I2S0, I2S1, I2S2, I2S3,
- SRC_RX, SRC_TX, SRC_SPDIF,
- DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
- GFX3D_MBX, GFX3D_DMAC,
- EXBUS_ATA,
- SPI0, SPI1,
- SCIF089, SCIF1234, SCIF567,
- ADC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
-
- /* interrupt groups */
- TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(GPIO, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
- INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
- INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
- INTC_VECT(TMU8, 0x540),
- INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
- INTC_VECT(SPDIF, 0x5e0),
- INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
- INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
- INTC_VECT(DMAC0_DMINT2, 0x680),
- INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
- INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
- INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
- INTC_VECT(SRC_SPDIF, 0x760),
- INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
- INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
- INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
- INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
- INTC_VECT(GFX2D, 0x8c0),
- INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
- INTC_VECT(EXBUS_ATA, 0x940),
- INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
- INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
- INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
- INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
- INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
- INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
- INTC_VECT(ADC, 0xb20),
- INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
- INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
- INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
- INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
- INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
- INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
- INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
- INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
- INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
- INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
- INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
- INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
- INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
- INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
- INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
- INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- TMU5_TICPI, TMU6, TMU7, TMU8),
- INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
- INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
- INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
- INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
- INTC_GROUP(SPI, SPI0, SPI1),
- INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
- INTC_GROUP(BBDMAC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
- { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
- GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
- DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
- { 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
- { 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
- { 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
- { 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
- { 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
- { 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
- { 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
- { 0xffe00020, 0, 32, 8, /* INT2PRI8 */
- { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
- { 0xffe00024, 0, 32, 8, /* INT2PRI9 */
- { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
- { 0xffe00028, 0, 32, 8, /* INT2PRI10 */
- { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
- { 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
- { TMU1, TMU2, TMU2_TICPI, TMU3 } },
- { 0xffe00030, 0, 32, 8, /* INT2PRI12 */
- { TMU4, TMU5, TMU5_TICPI, TMU6 } },
- { 0xffe00034, 0, 32, 8, /* INT2PRI13 */
- { TMU7, TMU8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
deleted file mode 100644
index c818b788ecb05a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ /dev/null
@@ -1,505 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7780 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/dma-register.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7780_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7780_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7780_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7780_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7780_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x640-0x6a0, 0x780-0x7a0
- */
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7780_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc818020,
- .end = 0xfc81808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x7c0-0x7e0, 0xd80-0xde0
- */
- .name = "error_irq",
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7780_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7780_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7780_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7780_devices_setup(void)
-{
- return platform_add_devices(sh7780_devices,
- ARRAY_SIZE(sh7780_devices));
-}
-arch_initcall(sh7780_devices_setup);
-
-static struct platform_device *sh7780_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- if (mach_is_sh2007()) {
- scif0_platform_data.scscr &= ~SCSCR_CKE1;
- scif1_platform_data.scscr &= ~SCSCR_CKE1;
- }
-
- sh_early_platform_add_devices(sh7780_early_devices,
- ARRAY_SIZE(sh7780_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
- INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
- INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
- INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
- INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
- INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI, 0xe80),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
- SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, DMAC1, DMAC0,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
deleted file mode 100644
index 3b4a414d60a91c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ /dev/null
@@ -1,608 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/dma-register.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x980)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7785_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7785_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7785_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7785_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7785_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6e0, and channel
- * vectors are 0x620-0x6c0
- */
- .name = "error_irq",
- .start = evt2irq(0x620),
- .end = evt2irq(0x620),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7785_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfcc08020,
- .end = 0xfcc0808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x940, and channel
- * vectors are 0x880-0x920
- */
- .name = "error_irq",
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7785_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7785_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7785_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7785_devices_setup(void)
-{
- return platform_add_devices(sh7785_devices,
- ARRAY_SIZE(sh7785_devices));
-}
-arch_initcall(sh7785_devices_setup);
-
-static struct platform_device *sh7785_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7785_early_devices,
- ARRAY_SIZE(sh7785_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
- SCIF2, SCIF3, SCIF4, SCIF5,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SIOF, MMCIF, DU, GDTA,
- TMU3, TMU4, TMU5,
- SSI0, SSI1,
- HAC0, HAC1,
- FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
- INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
- INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(DMAC0, 0x6e0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
- INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
- INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
- INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
- INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
- INTC_VECT(DMAC1, 0x940),
- INTC_VECT(HSPI, 0x960),
- INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
- INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SIOF, 0xc00),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DU, 0xd80),
- INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
- INTC_VECT(GDTA, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
- FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
- SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1,
- SCIF2, SCIF3 } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1,
- PCISERR, PCIINTA } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
- { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
- { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
- INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
- INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
- INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
- INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
- INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
- INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
- INTC_VECT(IRL4_HHHL, 0xcc0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0xe55f0000, 0xe5610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
deleted file mode 100644
index 74620f30b19bad..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ /dev/null
@@ -1,841 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Setup
- *
- * Copyright (C) 2009 - 2011 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Paul Mundt <paul.mundt@renesas.com>
- *
- * Based on SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-/*
- * The rest of these all have multiplexed IRQs
- */
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct resource scif1_demux_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- /* Placeholders, see sh7786_devices_setup() */
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x840)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x860)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffda0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct sh_timer_config tmu3_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu3_resources[] = {
- DEFINE_RES_MEM(0xffde0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device tmu3_device = {
- .name = "sh-tmu",
- .id = 3,
- .dev = {
- .platform_data = &tmu3_platform_data,
- },
- .resource = tmu3_resources,
- .num_resources = ARRAY_SIZE(tmu3_resources),
-};
-
-static const struct sh_dmae_channel dmac0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = dmac0_channels,
- .channel_num = ARRAY_SIZE(dmac0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource dmac0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- }, {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "error_irq",
- .start = evt2irq(0x5c0),
- .end = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- }, {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x500),
- .end = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = dmac0_resources,
- .num_resources = ARRAY_SIZE(dmac0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-#define USB_EHCI_START 0xffe70000
-#define USB_OHCI_START 0xffe70400
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = USB_EHCI_START,
- .end = USB_EHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = USB_OHCI_START,
- .end = USB_OHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7786_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &tmu3_device,
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &dma0_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-/*
- * Please call this function if your platform board
- * use external clock for USB
- * */
-#define USBCTL0 0xffe70858
-#define CLOCK_MODE_MASK 0xffffff7f
-#define EXT_CLOCK_MODE 0x00000080
-
-void __init sh7786_usb_use_exclock(void)
-{
- u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
- __raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
-}
-
-#define USBINITREG1 0xffe70094
-#define USBINITREG2 0xffe7009c
-#define USBINITVAL1 0x00ff0040
-#define USBINITVAL2 0x00000001
-
-#define USBPCTL1 0xffe70804
-#define USBST 0xffe70808
-#define PHY_ENB 0x00000001
-#define PLL_ENB 0x00000002
-#define PHY_RST 0x00000004
-#define ACT_PLL_STATUS 0xc0000000
-
-static void __init sh7786_usb_setup(void)
-{
- int i = 1000000;
-
- /*
- * USB initial settings
- *
- * The following settings are necessary
- * for using the USB modules.
- *
- * see "USB Initial Settings" for detail
- */
- __raw_writel(USBINITVAL1, USBINITREG1);
- __raw_writel(USBINITVAL2, USBINITREG2);
-
- /*
- * Set the PHY and PLL enable bit
- */
- __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i--) {
- if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
- break;
- }
- cpu_relax();
- }
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT,
- TMU0_0, TMU0_1, TMU0_2, TMU0_3,
- TMU1_0, TMU1_1, TMU1_2,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3,
- SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB,
- I2C0, I2C1,
- DU,
- SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL,
- HSPI,
- GPIO0, GPIO1,
- Thermal,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* Muxed sub-events */
- TXI1, BRI1, RXI1, ERI1,
-};
-
-static struct intc_vect sh7786_vectors[] __initdata = {
- INTC_VECT(WDT, 0x3e0),
- INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
- INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
- INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
- INTC_VECT(TMU1_2, 0x4c0),
- INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
- INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
- INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
- INTC_VECT(DMAC0_6, 0x5c0),
- INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
- INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
- INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
- INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
- INTC_VECT(HPB_2, 0x6e0),
- INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
- INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
- INTC_VECT(SCIF1, 0x780),
- INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
- INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
- INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
- INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
- INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
- INTC_VECT(PCIeC0_2, 0xb20),
- INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
- INTC_VECT(PCIeC1_2, 0xb80),
- INTC_VECT(USB, 0xba0),
- INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
- INTC_VECT(DU, 0xd00),
- INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
- INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
- INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
- INTC_VECT(PCIeC2_2, 0xde0),
- INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
- INTC_VECT(FLCTL, 0xe40),
- INTC_VECT(HSPI, 0xe80),
- INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
- INTC_VECT(Thermal, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-#define CnINTMSK0 0xfe410030
-#define CnINTMSK1 0xfe410040
-#define CnINTMSKCLR0 0xfe410050
-#define CnINTMSKCLR1 0xfe410060
-#define CnINT2MSKR0 0xfe410a20
-#define CnINT2MSKR1 0xfe410a24
-#define CnINT2MSKR2 0xfe410a28
-#define CnINT2MSKR3 0xfe410a2c
-#define CnINT2MSKCR0 0xfe410a30
-#define CnINT2MSKCR1 0xfe410a34
-#define CnINT2MSKCR2 0xfe410a38
-#define CnINT2MSKCR3 0xfe410a3c
-#define INTMSK2 0xfe410068
-#define INTMSKCLR2 0xfe41006c
-
-#define INTDISTCR0 0xfe4100b0
-#define INTDISTCR1 0xfe4100b4
-#define INT2DISTCR0 0xfe410900
-#define INT2DISTCR1 0xfe410904
-#define INT2DISTCR2 0xfe410908
-#define INT2DISTCR3 0xfe41090c
-
-static struct intc_mask_reg sh7786_mask_registers[] __initdata = {
- { CnINTMSK0, CnINTMSKCLR0, 32,
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 },
- INTC_SMP_BALANCING(INTDISTCR0) },
- { INTMSK2, INTMSKCLR2, 32,
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
- { CnINT2MSKR0, CnINT2MSKCR0 , 32,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { CnINT2MSKR1, CnINT2MSKCR1, 32,
- { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3, 0, }, INTC_SMP_BALANCING(INT2DISTCR1) },
- { CnINT2MSKR2, CnINT2MSKCR2, 32,
- { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR2) },
- { CnINT2MSKR3, CnINT2MSKCR3, 32,
- { 0, 0, 0, 0, 0, 0,
- I2C0, I2C1,
- DU, SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL, 0,
- HSPI, GPIO0, GPIO1, Thermal,
- 0, 0, 0, 0, 0, 0, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR3) },
-};
-
-static struct intc_prio_reg sh7786_prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
- { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
- TMU0_2, TMU0_3 } },
- { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
- TMU1_2, 0 } },
- { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
- DMAC0_2, DMAC0_3 } },
- { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
- DMAC0_6, HUDI1 } },
- { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
- DMAC1_1, DMAC1_2 } },
- { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
- HPB_1, HPB_2 } },
- { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
- SCIF0_2, SCIF0_3 } },
- { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
- { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
- { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
- Eth_0, Eth_1 } },
- { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
- { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
- { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
- { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
- { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1 } },
- { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
- { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
- { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
- { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
- { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
- PCIeC2_1, PCIeC2_2 } },
- { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
- { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
- GPIO1, Thermal } },
- { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
- { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
-};
-
-static struct intc_subgroup sh7786_subgroups[] __initdata = {
- { 0xfe410c20, 32, SCIF1,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TXI1, BRI1, RXI1, ERI1 } },
-};
-
-static struct intc_desc sh7786_intc_desc __initdata = {
- .name = "sh7786",
- .hw = {
- .vectors = sh7786_vectors,
- .nr_vectors = ARRAY_SIZE(sh7786_vectors),
- .mask_regs = sh7786_mask_registers,
- .nr_mask_regs = ARRAY_SIZE(sh7786_mask_registers),
- .subgroups = sh7786_subgroups,
- .nr_subgroups = ARRAY_SIZE(sh7786_subgroups),
- .prio_regs = sh7786_prio_registers,
- .nr_prio_regs = ARRAY_SIZE(sh7786_prio_registers),
- },
-};
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sh7786_sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg sh7786_ack_registers[] __initdata = {
- { 0xfe410024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
- vectors_irq0123, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
- vectors_irq4567, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
- INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
- INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
- INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
- INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
- INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
- INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
- INTC_VECT(IRL4_HHHL, 0xac0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xfe410000
-#define INTC_INTMSK0 CnINTMSK0
-#define INTC_INTMSK1 CnINTMSK1
-#define INTC_INTMSK2 INTMSK2
-#define INTC_INTMSKCLR1 CnINTMSKCLR1
-#define INTC_INTMSKCLR2 INTMSKCLR2
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- register_intc_controller(&sh7786_intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
-
-static int __init sh7786_devices_setup(void)
-{
- int ret, irq;
-
- sh7786_usb_setup();
-
- /*
- * De-mux SCIF1 IRQs if possible
- */
- irq = intc_irq_lookup(sh7786_intc_desc.name, TXI1);
- if (irq > 0) {
- scif1_demux_resources[1].start =
- intc_irq_lookup(sh7786_intc_desc.name, ERI1);
- scif1_demux_resources[2].start =
- intc_irq_lookup(sh7786_intc_desc.name, RXI1);
- scif1_demux_resources[3].start = irq;
- scif1_demux_resources[4].start =
- intc_irq_lookup(sh7786_intc_desc.name, BRI1);
-
- scif1_device.resource = scif1_demux_resources;
- scif1_device.num_resources = ARRAY_SIZE(scif1_demux_resources);
- }
-
- ret = platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return platform_add_devices(sh7786_devices,
- ARRAY_SIZE(sh7786_devices));
-}
-arch_initcall(sh7786_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
deleted file mode 100644
index 7014d6d199b3e6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ /dev/null
@@ -1,396 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 Prototype Setup
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/shx3.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-/*
- * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
- * INTEVT values overlap with the FPU EXPEVT ones, requiring special
- * demuxing in the exception dispatch path.
- *
- * As this overlap is something that never should have made it in to
- * silicon in the first place, we just refuse to deal with the port at
- * all rather than adding infrastructure to hack around it.
- */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffc30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffc40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7e0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffc60000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffc10000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffc20000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *shx3_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-static int __init shx3_devices_setup(void)
-{
- return platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-arch_initcall(shx3_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3,
- HUDII,
- TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
- PCII0, PCII1, PCII2, PCII3, PCII4,
- PCII5, PCII6, PCII7, PCII8, PCII9,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
- DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
- DU,
- DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
- DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
- IIC, VIN0, VIN1, VCORE0, ATAPI,
- DTU0, DTU1, DTU2, DTU3,
- FE0, FE1,
- GPIO0, GPIO1, GPIO2, GPIO3,
- PAM, IRM,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* interrupt groups */
- IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
- DMAC0, DMAC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDII, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460),
- INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0),
- INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520),
- INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560),
- INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0),
- INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0),
- INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
- INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
- INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
- INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
- INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
- INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960),
- INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0),
- INTC_VECT(DMAC0_DMAE, 0x9c0),
- INTC_VECT(DU, 0x9e0),
- INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20),
- INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60),
- INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0),
- INTC_VECT(DMAC1_DMAE, 0xac0),
- INTC_VECT(IIC, 0xae0),
- INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
- INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
- INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
- INTC_VECT(DTU0, 0xc40),
- INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
- INTC_VECT(DTU1, 0xca0),
- INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
- INTC_VECT(DTU2, 0xd00),
- INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
- INTC_VECT(DTU3, 0xd60),
- INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
- INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
- INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
- INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL),
- INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
- INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
- DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-};
-
-#define INT2DISTCR0 0xfe4108a0
-#define INT2DISTCR1 0xfe4108a4
-#define INT2DISTCR2 0xfe4108a8
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */
- { IRL } },
- { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */
- { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC,
- DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */
- 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */
- { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */
- PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2,
- PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11,
- DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7,
- DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4,
- DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 },
- INTC_SMP_BALANCING(INT2DISTCR1) },
- { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI,
- SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI,
- SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI,
- SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI },
- INTC_SMP_BALANCING(INT2DISTCR2) },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-
- { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4,
- TMU3, TMU2, TMU1, TMU0 } },
- { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0,
- SCIF3, SCIF2,
- SCIF1, SCIF0 } },
- { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0,
- PCII56789, PCII4,
- PCII3, PCII2,
- PCII1, PCII0 } },
- { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0,
- VIN1, VIN0, IIC, DU} },
- { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3,
- GPIO2, GPIO1, GPIO0, IRM } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
- mask_registers, prio_registers, sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
- mask_registers, prio_registers, NULL);
-
-void __init plat_irq_setup_pins(int mode)
-{
- int ret = 0;
-
- switch (mode) {
- case IRQ_MODE_IRQ:
- ret |= gpio_request(GPIO_FN_IRQ3, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ2, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ1, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ0, intc_desc_irq.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRQ mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irq);
- break;
- case IRQ_MODE_IRL3210:
- ret |= gpio_request(GPIO_FN_IRL3, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL2, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL1, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL0, intc_desc_irl.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRL mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irl);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- unsigned int nid = 1;
-
- /* Register CPU#0 URAM space as Node 1 */
- setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */
-
-#if 0
- /* XXX: Not yet.. */
- setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */
- setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */
- setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */
-#endif
-
- setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
deleted file mode 100644
index 1261dc7b84e8be..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 SMP
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/cpu.h>
-#include <asm/sections.h>
-
-#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
-#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
-
-#define STBCR_MSTP 0x00000001
-#define STBCR_RESET 0x00000002
-#define STBCR_SLEEP 0x00000004
-#define STBCR_LTSLP 0x80000000
-
-static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned int message = (unsigned int)(long)arg;
- unsigned int cpu = hard_smp_processor_id();
- unsigned int offs = 4 * cpu;
- unsigned int x;
-
- x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
- x &= (1 << (message << 2));
- __raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
-
- smp_message_recv(message);
-
- return IRQ_HANDLED;
-}
-
-static void shx3_smp_setup(void)
-{
- unsigned int cpu = 0;
- int i, num;
-
- init_cpu_possible(cpumask_of(cpu));
-
- /* Enable light sleep for the boot CPU */
- __raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
-
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
-
- /*
- * Do this stupidly for now.. we don't have an easy way to probe
- * for the total number of cores.
- */
- for (i = 1, num = 0; i < NR_CPUS; i++) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
-
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
-}
-
-static void shx3_prepare_cpus(unsigned int max_cpus)
-{
- int i;
-
- BUILD_BUG_ON(SMP_MSG_NR >= 8);
-
- for (i = 0; i < SMP_MSG_NR; i++)
- if (request_irq(104 + i, ipi_interrupt_handler,
- IRQF_PERCPU, "IPI", (void *)(long)i))
- pr_err("Failed to request irq %d\n", i);
-
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-}
-
-static void shx3_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- if (__in_29bit_mode())
- __raw_writel(entry_point, RESET_REG(cpu));
- else
- __raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
-
- if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
-
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
-
- /* Start up secondary processor by sending a reset */
- __raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
-}
-
-static unsigned int shx3_smp_processor_id(void)
-{
- return __raw_readl(0xff000048); /* CPIDR */
-}
-
-static void shx3_send_ipi(unsigned int cpu, unsigned int message)
-{
- unsigned long addr = 0xfe410070 + (cpu * 4);
-
- BUG_ON(cpu >= 4);
-
- __raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
-}
-
-static void shx3_update_boot_vector(unsigned int cpu)
-{
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
- __raw_writel(STBCR_RESET, STBCR_REG(cpu));
-}
-
-static int shx3_cpu_prepare(unsigned int cpu)
-{
- shx3_update_boot_vector(cpu);
- return 0;
-}
-
-static int register_shx3_cpu_notifier(void)
-{
- cpuhp_setup_state_nocalls(CPUHP_SH_SH3X_PREPARE, "sh/shx3:prepare",
- shx3_cpu_prepare, NULL);
- return 0;
-}
-late_initcall(register_shx3_cpu_notifier);
-
-struct plat_smp_ops shx3_smp_ops = {
- .smp_setup = shx3_smp_setup,
- .prepare_cpus = shx3_prepare_cpus,
- .start_cpu = shx3_start_cpu,
- .smp_processor_id = shx3_smp_processor_id,
- .send_ipi = shx3_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/ubc.c b/arch/sh/kernel/cpu/sh4a/ubc.c
deleted file mode 100644
index 25eacd9c47d1b8..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/ubc.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/ubc.c
- *
- * On-chip UBC support for SH-4A CPUs.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <asm/hw_breakpoint.h>
-
-#define UBC_CBR(idx) (0xff200000 + (0x20 * idx))
-#define UBC_CRR(idx) (0xff200004 + (0x20 * idx))
-#define UBC_CAR(idx) (0xff200008 + (0x20 * idx))
-#define UBC_CAMR(idx) (0xff20000c + (0x20 * idx))
-
-#define UBC_CCMFR 0xff200600
-#define UBC_CBCR 0xff200620
-
-/* CRR */
-#define UBC_CRR_PCB (1 << 1)
-#define UBC_CRR_BIE (1 << 0)
-
-/* CBR */
-#define UBC_CBR_CE (1 << 0)
-
-static struct sh_ubc sh4a_ubc;
-
-static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
- __raw_writel(info->address, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(0, UBC_CBR(idx));
- __raw_writel(0, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_enable_all(unsigned long mask)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (mask & (1 << i))
- __raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static void sh4a_ubc_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- __raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static unsigned long sh4a_ubc_active_mask(void)
-{
- unsigned long active = 0;
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
- active |= (1 << i);
-
- return active;
-}
-
-static unsigned long sh4a_ubc_triggered_mask(void)
-{
- return __raw_readl(UBC_CCMFR);
-}
-
-static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
-{
- __raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
-}
-
-static struct sh_ubc sh4a_ubc = {
- .name = "SH-4A",
- .num_events = 2,
- .trap_nr = 0x1e0,
- .enable = sh4a_ubc_enable,
- .disable = sh4a_ubc_disable,
- .enable_all = sh4a_ubc_enable_all,
- .disable_all = sh4a_ubc_disable_all,
- .active_mask = sh4a_ubc_active_mask,
- .triggered_mask = sh4a_ubc_triggered_mask,
- .clear_triggered_mask = sh4a_ubc_clear_triggered_mask,
-};
-
-static int __init sh4a_ubc_init(void)
-{
- struct clk *ubc_iclk = clk_get(NULL, "ubc0");
- int i;
-
- /*
- * The UBC MSTP bit is optional, as not all platforms will have
- * it. Just ignore it if we can't find it.
- */
- if (IS_ERR(ubc_iclk))
- ubc_iclk = NULL;
-
- clk_enable(ubc_iclk);
-
- __raw_writel(0, UBC_CBCR);
-
- for (i = 0; i < sh4a_ubc.num_events; i++) {
- __raw_writel(0, UBC_CAMR(i));
- __raw_writel(0, UBC_CBR(i));
-
- __raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
-
- /* dummy read for write posting */
- (void)__raw_readl(UBC_CRR(i));
- }
-
- clk_disable(ubc_iclk);
-
- sh4a_ubc.clk = ubc_iclk;
-
- return register_sh_ubc(&sh4a_ubc);
-}
-arch_initcall(sh4a_ubc_init);
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
deleted file mode 100644
index 7581d5f03ce155..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-Mobile backends.
-#
-
-# Power Management & Sleep mode
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
deleted file mode 100644
index b0f9c8f8fd146a..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/cpuidle.c
- *
- * Cpuidle support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <linux/cpuidle.h>
-#include <linux/export.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-
-static unsigned long cpuidle_mode[] = {
- SUSP_SH_SLEEP, /* regular sleep mode */
- SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
- SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
-};
-
-static int cpuidle_sleep_enter(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- unsigned long allowed_mode = SUSP_SH_SLEEP;
- int requested_state = index;
- int allowed_state;
- int k;
-
- /* convert allowed mode to allowed state */
- for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
- if (cpuidle_mode[k] == allowed_mode)
- break;
-
- allowed_state = k;
-
- /* take the following into account for sleep mode selection:
- * - allowed_state: best mode allowed by hardware (clock deps)
- * - requested_state: best mode allowed by software (latencies)
- */
- k = min_t(int, allowed_state, requested_state);
-
- sh_mobile_call_standby(cpuidle_mode[k]);
-
- return k;
-}
-
-static struct cpuidle_driver cpuidle_driver = {
- .name = "sh_idle",
- .owner = THIS_MODULE,
- .states = {
- {
- .exit_latency = 1,
- .target_residency = 1 * 2,
- .power_usage = 3,
- .enter = cpuidle_sleep_enter,
- .name = "C1",
- .desc = "SuperH Sleep Mode",
- },
- {
- .exit_latency = 100,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C2",
- .desc = "SuperH Sleep Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- {
- .exit_latency = 2300,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C3",
- .desc = "SuperH Mobile Standby Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- },
- .safe_state_index = 0,
- .state_count = 3,
-};
-
-int __init sh_mobile_setup_cpuidle(void)
-{
- if (sh_mobile_sleep_supported & SUSP_SH_SF)
- cpuidle_driver.states[1].flags = CPUIDLE_FLAG_NONE;
-
- if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
- cpuidle_driver.states[2].flags = CPUIDLE_FLAG_NONE;
-
- return cpuidle_register(&cpuidle_driver, NULL);
-}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
deleted file mode 100644
index ca9945f51e51d4..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/pm.c
- *
- * Power management support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/bl_bit.h>
-
-/*
- * Notifier lists for pre/post sleep notification
- */
-ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
-ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
-
-/*
- * Sleep modes available on SuperH Mobile:
- *
- * Sleep mode is just plain "sleep" instruction
- * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
- * Standby Self-Refresh mode is above plus stopped clocks
- */
-#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
-#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
-#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
-#define SUSP_MODE_RSTANDBY_SF \
- (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
- /*
- * U-standby mode is unsupported since it needs bootloader hacks
- */
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-#define RAM_BASE 0xfd800000 /* RSMEM */
-#else
-#define RAM_BASE 0xe5200000 /* ILRAM */
-#endif
-
-void sh_mobile_call_standby(unsigned long mode)
-{
- void *onchip_mem = (void *)RAM_BASE;
- struct sh_sleep_data *sdp = onchip_mem;
- void (*standby_onchip_mem)(unsigned long, unsigned long);
-
- /* code located directly after data structure */
- standby_onchip_mem = (void *)(sdp + 1);
-
- atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
- mode, NULL);
-
- /* flush the caches if MMU flag is set */
- if (mode & SUSP_SH_MMU)
- flush_cache_all();
-
- /* Let assembly snippet in on-chip memory handle the rest */
- standby_onchip_mem(mode, RAM_BASE);
-
- atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
- mode, NULL);
-}
-
-extern char sh_mobile_sleep_enter_start;
-extern char sh_mobile_sleep_enter_end;
-
-extern char sh_mobile_sleep_resume_start;
-extern char sh_mobile_sleep_resume_end;
-
-unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
-
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end)
-{
- void *onchip_mem = (void *)RAM_BASE;
- void *vp;
- struct sh_sleep_data *sdp;
- int n;
-
- /* part 0: data area */
- sdp = onchip_mem;
- sdp->addr.stbcr = 0xa4150020; /* STBCR */
- sdp->addr.bar = 0xa4150040; /* BAR */
- sdp->addr.pteh = 0xff000000; /* PTEH */
- sdp->addr.ptel = 0xff000004; /* PTEL */
- sdp->addr.ttb = 0xff000008; /* TTB */
- sdp->addr.tea = 0xff00000c; /* TEA */
- sdp->addr.mmucr = 0xff000010; /* MMUCR */
- sdp->addr.ptea = 0xff000034; /* PTEA */
- sdp->addr.pascr = 0xff000070; /* PASCR */
- sdp->addr.irmcr = 0xff000078; /* IRMCR */
- sdp->addr.ccr = 0xff00001c; /* CCR */
- sdp->addr.ramcr = 0xff000074; /* RAMCR */
- vp = sdp + 1;
-
- /* part 1: common code to enter sleep mode */
- n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
- memcpy(vp, &sh_mobile_sleep_enter_start, n);
- vp += roundup(n, 4);
-
- /* part 2: board specific code to enter self-refresh mode */
- n = pre_end - pre_start;
- memcpy(vp, pre_start, n);
- sdp->sf_pre = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 3: board specific code to resume from self-refresh mode */
- n = post_end - post_start;
- memcpy(vp, post_start, n);
- sdp->sf_post = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 4: common code to resume from sleep mode */
- WARN_ON(vp > (onchip_mem + 0x600));
- vp = onchip_mem + 0x600; /* located at interrupt vector */
- n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
- memcpy(vp, &sh_mobile_sleep_resume_start, n);
- sdp->resume = (unsigned long)vp;
-
- sh_mobile_sleep_supported |= flags;
-}
-
-static int sh_pm_enter(suspend_state_t state)
-{
- if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
- return -ENXIO;
-
- local_irq_disable();
- set_bl_bit();
- sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
- local_irq_disable();
- clear_bl_bit();
- return 0;
-}
-
-static const struct platform_suspend_ops sh_pm_ops = {
- .enter = sh_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init sh_pm_init(void)
-{
- suspend_set_ops(&sh_pm_ops);
- return sh_mobile_setup_cpuidle();
-}
-
-late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
deleted file mode 100644
index f928c03151296c..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
- *
- * Sleep mode and Standby modes support for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-
-/*
- * Kernel mode register usage, see entry.S:
- * k0 scratch
- * k1 scratch
- */
-#define k0 r0
-#define k1 r1
-
-/* manage self-refresh and enter standby mode. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(sh_mobile_sleep_enter_start)
-
- /* save mode flags */
- mov.l r4, @(SH_SLEEP_MODE, r5)
-
- /* save original vbr */
- stc vbr, r0
- mov.l r0, @(SH_SLEEP_VBR, r5)
-
- /* point vbr to our on-chip memory page */
- ldc r5, vbr
-
- /* save return address */
- sts pr, r0
- mov.l r0, @(SH_SLEEP_SPC, r5)
-
- /* save sr */
- stc sr, r0
- mov.l r0, @(SH_SLEEP_SR, r5)
-
- /* save general purpose registers to stack if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_regs_save
-
- sts.l pr, @-r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* make sure bank0 is selected, save low registers */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
- bsr save_low_regs
- nop
-
- /* switch to bank 1, save low registers */
- mov.l rb_bit, r10
- bsr set_sr
- mov #-1, r9
-
- bsr save_low_regs
- nop
-
- /* switch back to bank 0 */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
-skip_regs_save:
-
- /* save sp, also set to internal ram */
- mov.l r15, @(SH_SLEEP_SP, r5)
- mov r5, r15
-
- /* save stbcr */
- bsr save_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* save mmu and cache context if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_mmu_save_disable
-
- /* save mmu state */
- bsr save_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_MMUCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- /* invalidate TLBs and disable the MMU */
- bsr get_register
- mov #SH_SLEEP_REG_MMUCR, r0
- mov #4, r1
- mov.l r1, @r0
- icbi @r0
-
- /* save cache registers and disable caches */
- bsr save_register
- mov #SH_SLEEP_REG_CCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_RAMCR, r0
-
- bsr get_register
- mov #SH_SLEEP_REG_CCR, r0
- mov #0, r1
- mov.l r1, @r0
- icbi @r0
-
-skip_mmu_save_disable:
- /* call self-refresh entering code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_set_sf
-
- mov.l @(SH_SLEEP_SF_PRE, r5), r0
- jsr @r0
- nop
-
-skip_set_sf:
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_STANDBY, r0
- bt test_rstandby
-
- /* set mode to "software standby mode" */
- bra do_sleep
- mov #0x80, r1
-
-test_rstandby:
- tst #SUSP_SH_RSTANDBY, r0
- bt test_ustandby
-
- /* setup BAR register */
- bsr get_register
- mov #SH_SLEEP_REG_BAR, r0
- mov.l @(SH_SLEEP_RESUME, r5), r1
- mov.l r1, @r0
-
- /* set mode to "r-standby mode" */
- bra do_sleep
- mov #0x20, r1
-
-test_ustandby:
- tst #SUSP_SH_USTANDBY, r0
- bt force_sleep
-
- /* set mode to "u-standby mode" */
- bra do_sleep
- mov #0x10, r1
-
-force_sleep:
-
- /* set mode to "sleep mode" */
- mov #0x00, r1
-
-do_sleep:
- /* setup and enter selected standby mode */
- bsr get_register
- mov #SH_SLEEP_REG_STBCR, r0
- mov.l r1, @r0
-again:
- sleep
- bra again
- nop
-
-save_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_ADDR, r0
- mov.l @r1, r1
- add #SH_SLEEP_BASE_DATA, r0
- mov.l r1, @(r0, r5)
- add #-SH_SLEEP_BASE_DATA, r0
- rts
- nop
-
-get_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- rts
- nop
-
-set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-save_low_regs:
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
- .balign 4
-rb_bit: .long 0x20000000 ! RB=1
-
-ENTRY(sh_mobile_sleep_enter_end)
-
- .balign 4
-ENTRY(sh_mobile_sleep_resume_start)
-
- /* figure out start address */
- bsr 0f
- nop
-0:
- sts pr, k1
- mov.l 1f, k0
- and k0, k1
-
- /* store pointer to data area in VBR */
- ldc k1, vbr
-
- /* setup sr with saved sr */
- mov.l @(SH_SLEEP_SR, k1), k0
- ldc k0, sr
-
- /* now: user register set! */
- stc vbr, r5
-
- /* setup spc with return address to c code */
- mov.l @(SH_SLEEP_SPC, r5), r0
- ldc r0, spc
-
- /* restore vbr */
- mov.l @(SH_SLEEP_VBR, r5), r0
- ldc r0, vbr
-
- /* setup ssr with saved sr */
- mov.l @(SH_SLEEP_SR, r5), r0
- ldc r0, ssr
-
- /* restore sp */
- mov.l @(SH_SLEEP_SP, r5), r15
-
- /* restore sleep mode register */
- bsr restore_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* call self-refresh resume code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_restore_sf
-
- mov.l @(SH_SLEEP_SF_POST, r5), r0
- jsr @r0
- nop
-
-skip_restore_sf:
- /* restore mmu and cache state if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_restore_mmu
-
- /* restore mmu state */
- bsr restore_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_MMUCR, r0
- icbi @r0
-
- /* restore cache settings */
- bsr restore_register
- mov #SH_SLEEP_REG_RAMCR, r0
- icbi @r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_CCR, r0
- icbi @r0
-
-skip_restore_mmu:
-
- /* restore general purpose registers if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_restore_regs
-
- /* switch to bank 1, restore low registers */
- mov.l _rb_bit, r10
- bsr _set_sr
- mov #-1, r9
-
- bsr restore_low_regs
- nop
-
- /* switch to bank0, restore low registers */
- mov.l _rb_bit, r9
- not r9, r9
- bsr _set_sr
- mov #0, r10
-
- bsr restore_low_regs
- nop
-
- /* restore the rest of the registers */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- lds.l @r15+, pr
-
-skip_restore_regs:
- rte
- nop
-
-restore_register:
- add #SH_SLEEP_BASE_DATA, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_DATA, r0
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- mov.l r1, @r0
- rts
- nop
-
-_set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-restore_low_regs:
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- rts
- mov.l @r15+, r7
-
- .balign 4
-_rb_bit: .long 0x20000000 ! RB=1
-1: .long ~0x7ff
-ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
deleted file mode 100644
index 19ce6a950aaca8..00000000000000
--- a/arch/sh/kernel/crash_dump.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * crash_dump.c - Memory preserving reboot related code.
- *
- * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- * Copyright (C) IBM Corporation, 2004. All rights reserved
- */
-#include <linux/errno.h>
-#include <linux/crash_dump.h>
-#include <linux/io.h>
-#include <linux/uio.h>
-#include <linux/uaccess.h>
-
-ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
- size_t csize, unsigned long offset)
-{
- void __iomem *vaddr;
-
- if (!csize)
- return 0;
-
- vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
- csize = copy_to_iter(vaddr + offset, csize, iter);
- iounmap(vaddr);
-
- return csize;
-}
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
deleted file mode 100644
index ad07527e2a990a..00000000000000
--- a/arch/sh/kernel/debugtraps.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/debugtraps.S
- *
- * Debug trap jump tables for SuperH
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_KGDB)
-#define singlestep_trap_handler debug_trap_handler
-#endif
-
-#if !defined(CONFIG_SH_STANDARD_BIOS)
-#define sh_bios_handler debug_trap_handler
-#endif
-
- .data
-
-ENTRY(debug_trap_table)
- .long debug_trap_handler /* 0x30 */
- .long debug_trap_handler /* 0x31 */
- .long debug_trap_handler /* 0x32 */
- .long debug_trap_handler /* 0x33 */
- .long debug_trap_handler /* 0x34 */
- .long debug_trap_handler /* 0x35 */
- .long debug_trap_handler /* 0x36 */
- .long debug_trap_handler /* 0x37 */
- .long debug_trap_handler /* 0x38 */
- .long debug_trap_handler /* 0x39 */
- .long debug_trap_handler /* 0x3a */
- .long debug_trap_handler /* 0x3b */
- .long breakpoint_trap_handler /* 0x3c */
- .long singlestep_trap_handler /* 0x3d */
- .long bug_trap_handler /* 0x3e */
- .long sh_bios_handler /* 0x3f */
diff --git a/arch/sh/kernel/disassemble.c b/arch/sh/kernel/disassemble.c
deleted file mode 100644
index 34e25a439c811c..00000000000000
--- a/arch/sh/kernel/disassemble.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Disassemble SuperH instructions.
- *
- * Copyright (C) 1999 kaz Kojima
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-/*
- * Format of an instruction in memory.
- */
-typedef enum {
- HEX_0, HEX_1, HEX_2, HEX_3, HEX_4, HEX_5, HEX_6, HEX_7,
- HEX_8, HEX_9, HEX_A, HEX_B, HEX_C, HEX_D, HEX_E, HEX_F,
- REG_N, REG_M, REG_NM, REG_B,
- BRANCH_12, BRANCH_8,
- DISP_8, DISP_4,
- IMM_4, IMM_4BY2, IMM_4BY4, PCRELIMM_8BY2, PCRELIMM_8BY4,
- IMM_8, IMM_8BY2, IMM_8BY4,
-} sh_nibble_type;
-
-typedef enum {
- A_END, A_BDISP12, A_BDISP8,
- A_DEC_M, A_DEC_N,
- A_DISP_GBR, A_DISP_PC, A_DISP_REG_M, A_DISP_REG_N,
- A_GBR,
- A_IMM,
- A_INC_M, A_INC_N,
- A_IND_M, A_IND_N, A_IND_R0_REG_M, A_IND_R0_REG_N,
- A_MACH, A_MACL,
- A_PR, A_R0, A_R0_GBR, A_REG_M, A_REG_N, A_REG_B,
- A_SR, A_VBR, A_SSR, A_SPC, A_SGR, A_DBR,
- F_REG_N, F_REG_M, D_REG_N, D_REG_M,
- X_REG_N, /* Only used for argument parsing */
- X_REG_M, /* Only used for argument parsing */
- DX_REG_N, DX_REG_M, V_REG_N, V_REG_M,
- FD_REG_N,
- XMTRX_M4,
- F_FR0,
- FPUL_N, FPUL_M, FPSCR_N, FPSCR_M,
-} sh_arg_type;
-
-static struct sh_opcode_info {
- char *name;
- sh_arg_type arg[7];
- sh_nibble_type nibbles[4];
-} sh_table[] = {
- {"add",{A_IMM,A_REG_N},{HEX_7,REG_N,IMM_8}},
- {"add",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_C}},
- {"addc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_E}},
- {"addv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_F}},
- {"and",{A_IMM,A_R0},{HEX_C,HEX_9,IMM_8}},
- {"and",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_9}},
- {"and.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_D,IMM_8}},
- {"bra",{A_BDISP12},{HEX_A,BRANCH_12}},
- {"bsr",{A_BDISP12},{HEX_B,BRANCH_12}},
- {"bt",{A_BDISP8},{HEX_8,HEX_9,BRANCH_8}},
- {"bf",{A_BDISP8},{HEX_8,HEX_B,BRANCH_8}},
- {"bt.s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bt/s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bf.s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"bf/s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"clrmac",{0},{HEX_0,HEX_0,HEX_2,HEX_8}},
- {"clrs",{0},{HEX_0,HEX_0,HEX_4,HEX_8}},
- {"clrt",{0},{HEX_0,HEX_0,HEX_0,HEX_8}},
- {"cmp/eq",{A_IMM,A_R0},{HEX_8,HEX_8,IMM_8}},
- {"cmp/eq",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_0}},
- {"cmp/ge",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_3}},
- {"cmp/gt",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_7}},
- {"cmp/hi",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_6}},
- {"cmp/hs",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_2}},
- {"cmp/pl",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_5}},
- {"cmp/pz",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_1}},
- {"cmp/str",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_C}},
- {"div0s",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_7}},
- {"div0u",{0},{HEX_0,HEX_0,HEX_1,HEX_9}},
- {"div1",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_4}},
- {"exts.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_E}},
- {"exts.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_F}},
- {"extu.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_C}},
- {"extu.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_D}},
- {"jmp",{A_IND_N},{HEX_4,REG_N,HEX_2,HEX_B}},
- {"jsr",{A_IND_N},{HEX_4,REG_N,HEX_0,HEX_B}},
- {"ldc",{A_REG_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_E}},
- {"ldc",{A_REG_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_E}},
- {"ldc",{A_REG_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_E}},
- {"ldc",{A_REG_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_E}},
- {"ldc",{A_REG_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_E}},
- {"ldc",{A_REG_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_E}},
- {"ldc",{A_REG_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_E}},
- {"ldc.l",{A_INC_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_7}},
- {"ldc.l",{A_INC_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_7}},
- {"ldc.l",{A_INC_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_7}},
- {"ldc.l",{A_INC_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_7}},
- {"ldc.l",{A_INC_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_7}},
- {"ldc.l",{A_INC_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_7}},
- {"ldc.l",{A_INC_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_7}},
- {"lds",{A_REG_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_A}},
- {"lds",{A_REG_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_A}},
- {"lds",{A_REG_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_A}},
- {"lds",{A_REG_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_A}},
- {"lds",{A_REG_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_A}},
- {"lds.l",{A_INC_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_6}},
- {"lds.l",{A_INC_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_6}},
- {"lds.l",{A_INC_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_6}},
- {"lds.l",{A_INC_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_6}},
- {"lds.l",{A_INC_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_6}},
- {"ldtlb",{0},{HEX_0,HEX_0,HEX_3,HEX_8}},
- {"mac.w",{A_INC_M,A_INC_N},{HEX_4,REG_N,REG_M,HEX_F}},
- {"mov",{A_IMM,A_REG_N},{HEX_E,REG_N,IMM_8}},
- {"mov",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_3}},
- {"mov.b",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_DISP_REG_M,A_R0},{HEX_8,HEX_4,REG_M,IMM_4}},
- {"mov.b",{A_DISP_GBR,A_R0},{HEX_C,HEX_4,IMM_8}},
- {"mov.b",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_C}},
- {"mov.b",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_4}},
- {"mov.b",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_R0,A_DISP_REG_M},{HEX_8,HEX_0,REG_M,IMM_4}},
- {"mov.b",{A_R0,A_DISP_GBR},{HEX_C,HEX_0,IMM_8}},
- {"mov.l",{ A_REG_M,A_DISP_REG_N},{HEX_1,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_DISP_REG_M,A_REG_N},{HEX_5,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{A_DISP_GBR,A_R0},{HEX_C,HEX_6,IMM_8BY4}},
- {"mov.l",{A_DISP_PC,A_REG_N},{HEX_D,REG_N,PCRELIMM_8BY4}},
- {"mov.l",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_E}},
- {"mov.l",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_6}},
- {"mov.l",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_R0,A_DISP_GBR},{HEX_C,HEX_2,IMM_8BY4}},
- {"mov.w",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_DISP_REG_M,A_R0},{HEX_8,HEX_5,REG_M,IMM_4BY2}},
- {"mov.w",{A_DISP_GBR,A_R0},{HEX_C,HEX_5,IMM_8BY2}},
- {"mov.w",{A_DISP_PC,A_REG_N},{HEX_9,REG_N,PCRELIMM_8BY2}},
- {"mov.w",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_D}},
- {"mov.w",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_5}},
- {"mov.w",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_R0,A_DISP_REG_M},{HEX_8,HEX_1,REG_M,IMM_4BY2}},
- {"mov.w",{A_R0,A_DISP_GBR},{HEX_C,HEX_1,IMM_8BY2}},
- {"mova",{A_DISP_PC,A_R0},{HEX_C,HEX_7,PCRELIMM_8BY4}},
- {"movca.l",{A_R0,A_IND_N},{HEX_0,REG_N,HEX_C,HEX_3}},
- {"movt",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_9}},
- {"muls",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_F}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"mulu",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_E}},
- {"neg",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_B}},
- {"negc",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_A}},
- {"nop",{0},{HEX_0,HEX_0,HEX_0,HEX_9}},
- {"not",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_7}},
- {"ocbi",{A_IND_N},{HEX_0,REG_N,HEX_9,HEX_3}},
- {"ocbp",{A_IND_N},{HEX_0,REG_N,HEX_A,HEX_3}},
- {"ocbwb",{A_IND_N},{HEX_0,REG_N,HEX_B,HEX_3}},
- {"or",{A_IMM,A_R0},{HEX_C,HEX_B,IMM_8}},
- {"or",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_B}},
- {"or.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_F,IMM_8}},
- {"pref",{A_IND_N},{HEX_0,REG_N,HEX_8,HEX_3}},
- {"rotcl",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_4}},
- {"rotcr",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_5}},
- {"rotl",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_4}},
- {"rotr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_5}},
- {"rte",{0},{HEX_0,HEX_0,HEX_2,HEX_B}},
- {"rts",{0},{HEX_0,HEX_0,HEX_0,HEX_B}},
- {"sets",{0},{HEX_0,HEX_0,HEX_5,HEX_8}},
- {"sett",{0},{HEX_0,HEX_0,HEX_1,HEX_8}},
- {"shad",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_C}},
- {"shld",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_D}},
- {"shal",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_0}},
- {"shar",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_1}},
- {"shll",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_0}},
- {"shll16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_8}},
- {"shll2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_8}},
- {"shll8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_8}},
- {"shlr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_1}},
- {"shlr16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_9}},
- {"shlr2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_9}},
- {"shlr8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_9}},
- {"sleep",{0},{HEX_0,HEX_0,HEX_1,HEX_B}},
- {"stc",{A_SR,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_2}},
- {"stc",{A_GBR,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_2}},
- {"stc",{A_VBR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_2}},
- {"stc",{A_SSR,A_REG_N},{HEX_0,REG_N,HEX_3,HEX_2}},
- {"stc",{A_SPC,A_REG_N},{HEX_0,REG_N,HEX_4,HEX_2}},
- {"stc",{A_SGR,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_2}},
- {"stc",{A_DBR,A_REG_N},{HEX_0,REG_N,HEX_7,HEX_2}},
- {"stc",{A_REG_B,A_REG_N},{HEX_0,REG_N,REG_B,HEX_2}},
- {"stc.l",{A_SR,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_3}},
- {"stc.l",{A_GBR,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_3}},
- {"stc.l",{A_VBR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_3}},
- {"stc.l",{A_SSR,A_DEC_N},{HEX_4,REG_N,HEX_3,HEX_3}},
- {"stc.l",{A_SPC,A_DEC_N},{HEX_4,REG_N,HEX_4,HEX_3}},
- {"stc.l",{A_SGR,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_3}},
- {"stc.l",{A_DBR,A_DEC_N},{HEX_4,REG_N,HEX_7,HEX_3}},
- {"stc.l",{A_REG_B,A_DEC_N},{HEX_4,REG_N,REG_B,HEX_3}},
- {"sts",{A_MACH,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_A}},
- {"sts",{A_MACL,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_A}},
- {"sts",{A_PR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_A}},
- {"sts",{FPUL_M,A_REG_N},{HEX_0,REG_N,HEX_5,HEX_A}},
- {"sts",{FPSCR_M,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_A}},
- {"sts.l",{A_MACH,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_2}},
- {"sts.l",{A_MACL,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_2}},
- {"sts.l",{A_PR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_2}},
- {"sts.l",{FPUL_M,A_DEC_N},{HEX_4,REG_N,HEX_5,HEX_2}},
- {"sts.l",{FPSCR_M,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_2}},
- {"sub",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_8}},
- {"subc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_A}},
- {"subv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_B}},
- {"swap.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_8}},
- {"swap.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_9}},
- {"tas.b",{A_IND_N},{HEX_4,REG_N,HEX_1,HEX_B}},
- {"trapa",{A_IMM},{HEX_C,HEX_3,IMM_8}},
- {"tst",{A_IMM,A_R0},{HEX_C,HEX_8,IMM_8}},
- {"tst",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_8}},
- {"tst.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_C,IMM_8}},
- {"xor",{A_IMM,A_R0},{HEX_C,HEX_A,IMM_8}},
- {"xor",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_A}},
- {"xor.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_E,IMM_8}},
- {"xtrct",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_D}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"dt",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_0}},
- {"dmuls.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_D}},
- {"dmulu.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_5}},
- {"mac.l",{A_INC_M,A_INC_N},{HEX_0,REG_N,REG_M,HEX_F}},
- {"braf",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_3}},
- {"bsrf",{A_REG_N},{HEX_0,REG_N,HEX_0,HEX_3}},
- {"fabs",{FD_REG_N},{HEX_F,REG_N,HEX_5,HEX_D}},
- {"fadd",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fadd",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fcmp/eq",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/eq",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/gt",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcmp/gt",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcnvds",{D_REG_N,FPUL_M},{HEX_F,REG_N,HEX_B,HEX_D}},
- {"fcnvsd",{FPUL_M,D_REG_N},{HEX_F,REG_N,HEX_A,HEX_D}},
- {"fdiv",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fdiv",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fipr",{V_REG_M,V_REG_N},{HEX_F,REG_NM,HEX_E,HEX_D}},
- {"fldi0",{F_REG_N},{HEX_F,REG_N,HEX_8,HEX_D}},
- {"fldi1",{F_REG_N},{HEX_F,REG_N,HEX_9,HEX_D}},
- {"flds",{F_REG_N,FPUL_M},{HEX_F,REG_N,HEX_1,HEX_D}},
- {"float",{FPUL_M,FD_REG_N},{HEX_F,REG_N,HEX_2,HEX_D}},
- {"fmac",{F_FR0,F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_E}},
- {"fmov",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{DX_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.d",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.d",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.d",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.d",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.d",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.d",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.s",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.s",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.s",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.s",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.s",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.s",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmul",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fmul",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fneg",{FD_REG_N},{HEX_F,REG_N,HEX_4,HEX_D}},
- {"frchg",{0},{HEX_F,HEX_B,HEX_F,HEX_D}},
- {"fschg",{0},{HEX_F,HEX_3,HEX_F,HEX_D}},
- {"fsqrt",{FD_REG_N},{HEX_F,REG_N,HEX_6,HEX_D}},
- {"fsts",{FPUL_M,F_REG_N},{HEX_F,REG_N,HEX_0,HEX_D}},
- {"fsub",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"fsub",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"ftrc",{FD_REG_N,FPUL_M},{HEX_F,REG_N,HEX_3,HEX_D}},
- {"ftrv",{XMTRX_M4,V_REG_N},{HEX_F,REG_NM,HEX_F,HEX_D}},
- { 0 },
-};
-
-static void print_sh_insn(u32 memaddr, u16 insn)
-{
- int relmask = ~0;
- int nibs[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, insn & 0xf};
- int lastsp;
- struct sh_opcode_info *op = sh_table;
-
- for (; op->name; op++) {
- int n;
- int imm = 0;
- int rn = 0;
- int rm = 0;
- int rb = 0;
- int disp_pc;
- int disp_pc_addr = 0;
-
- for (n = 0; n < 4; n++) {
- int i = op->nibbles[n];
-
- if (i < 16) {
- if (nibs[n] == i)
- continue;
- goto fail;
- }
- switch (i) {
- case BRANCH_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x80)
- imm |= ~0xff;
- imm = ((char)imm) * 2 + 4 ;
- goto ok;
- case BRANCH_12:
- imm = ((nibs[1]) << 8) | (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x800)
- imm |= ~0xfff;
- imm = imm * 2 + 4;
- goto ok;
- case IMM_4:
- imm = nibs[3];
- goto ok;
- case IMM_4BY2:
- imm = nibs[3] <<1;
- goto ok;
- case IMM_4BY4:
- imm = nibs[3] <<2;
- goto ok;
- case IMM_8:
- imm = (nibs[2] << 4) | nibs[3];
- goto ok;
- case PCRELIMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- relmask = ~1;
- goto ok;
- case PCRELIMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- relmask = ~3;
- goto ok;
- case IMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- goto ok;
- case IMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- goto ok;
- case DISP_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- goto ok;
- case DISP_4:
- imm = nibs[3];
- goto ok;
- case REG_N:
- rn = nibs[n];
- break;
- case REG_M:
- rm = nibs[n];
- break;
- case REG_NM:
- rn = (nibs[n] & 0xc) >> 2;
- rm = (nibs[n] & 0x3);
- break;
- case REG_B:
- rb = nibs[n] & 0x07;
- break;
- default:
- return;
- }
- }
-
- ok:
- pr_cont("%-8s ", op->name);
- lastsp = (op->arg[0] == A_END);
- disp_pc = 0;
- for (n = 0; n < 6 && op->arg[n] != A_END; n++) {
- if (n && op->arg[1] != A_END)
- pr_cont(", ");
- switch (op->arg[n]) {
- case A_IMM:
- pr_cont("#%d", (char)(imm));
- break;
- case A_R0:
- pr_cont("r0");
- break;
- case A_REG_N:
- pr_cont("r%d", rn);
- break;
- case A_INC_N:
- pr_cont("@r%d+", rn);
- break;
- case A_DEC_N:
- pr_cont("@-r%d", rn);
- break;
- case A_IND_N:
- pr_cont("@r%d", rn);
- break;
- case A_DISP_REG_N:
- pr_cont("@(%d,r%d)", imm, rn);
- break;
- case A_REG_M:
- pr_cont("r%d", rm);
- break;
- case A_INC_M:
- pr_cont("@r%d+", rm);
- break;
- case A_DEC_M:
- pr_cont("@-r%d", rm);
- break;
- case A_IND_M:
- pr_cont("@r%d", rm);
- break;
- case A_DISP_REG_M:
- pr_cont("@(%d,r%d)", imm, rm);
- break;
- case A_REG_B:
- pr_cont("r%d_bank", rb);
- break;
- case A_DISP_PC:
- disp_pc = 1;
- disp_pc_addr = imm + 4 + (memaddr & relmask);
- pr_cont("%08x <%pS>", disp_pc_addr,
- (void *)disp_pc_addr);
- break;
- case A_IND_R0_REG_N:
- pr_cont("@(r0,r%d)", rn);
- break;
- case A_IND_R0_REG_M:
- pr_cont("@(r0,r%d)", rm);
- break;
- case A_DISP_GBR:
- pr_cont("@(%d,gbr)", imm);
- break;
- case A_R0_GBR:
- pr_cont("@(r0,gbr)");
- break;
- case A_BDISP12:
- case A_BDISP8:
- pr_cont("%08x", imm + memaddr);
- break;
- case A_SR:
- pr_cont("sr");
- break;
- case A_GBR:
- pr_cont("gbr");
- break;
- case A_VBR:
- pr_cont("vbr");
- break;
- case A_SSR:
- pr_cont("ssr");
- break;
- case A_SPC:
- pr_cont("spc");
- break;
- case A_MACH:
- pr_cont("mach");
- break;
- case A_MACL:
- pr_cont("macl");
- break;
- case A_PR:
- pr_cont("pr");
- break;
- case A_SGR:
- pr_cont("sgr");
- break;
- case A_DBR:
- pr_cont("dbr");
- break;
- case FD_REG_N:
- case F_REG_N:
- pr_cont("fr%d", rn);
- break;
- case F_REG_M:
- pr_cont("fr%d", rm);
- break;
- case DX_REG_N:
- if (rn & 1) {
- pr_cont("xd%d", rn & ~1);
- break;
- }
- fallthrough;
- case D_REG_N:
- pr_cont("dr%d", rn);
- break;
- case DX_REG_M:
- if (rm & 1) {
- pr_cont("xd%d", rm & ~1);
- break;
- }
- fallthrough;
- case D_REG_M:
- pr_cont("dr%d", rm);
- break;
- case FPSCR_M:
- case FPSCR_N:
- pr_cont("fpscr");
- break;
- case FPUL_M:
- case FPUL_N:
- pr_cont("fpul");
- break;
- case F_FR0:
- pr_cont("fr0");
- break;
- case V_REG_N:
- pr_cont("fv%d", rn*4);
- break;
- case V_REG_M:
- pr_cont("fv%d", rm*4);
- break;
- case XMTRX_M4:
- pr_cont("xmtrx");
- break;
- default:
- return;
- }
- }
-
- if (disp_pc && strcmp(op->name, "mova") != 0) {
- u32 val;
-
- if (relmask == ~1)
- __get_user(val, (u16 *)disp_pc_addr);
- else
- __get_user(val, (u32 *)disp_pc_addr);
-
- pr_cont(" ! %08x <%pS>", val, (void *)val);
- }
-
- return;
- fail:
- ;
-
- }
-
- pr_info(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]);
-}
-
-void show_code(struct pt_regs *regs)
-{
- unsigned short *pc = (unsigned short *)regs->pc;
- long i;
-
- if (regs->pc & 0x1)
- return;
-
- pr_info("Code:\n");
-
- for (i = -3 ; i < 6 ; i++) {
- unsigned short insn;
-
- if (__get_user(insn, pc + i)) {
- pr_err(" (Bad address in pc)\n");
- break;
- }
-
- pr_info("%s%08lx: ", (i ? " " : "->"),
- (unsigned long)(pc + i));
- print_sh_insn((unsigned long)(pc + i), insn);
- pr_cont("\n");
- }
-
- pr_info("\n");
-}
diff --git a/arch/sh/kernel/dma-coherent.c b/arch/sh/kernel/dma-coherent.c
deleted file mode 100644
index 6a44c0e7ba40ef..00000000000000
--- a/arch/sh/kernel/dma-coherent.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/dma-map-ops.h>
-#include <asm/cacheflush.h>
-#include <asm/addrspace.h>
-
-void arch_dma_prep_coherent(struct page *page, size_t size)
-{
- __flush_purge_region(page_address(page), size);
-}
-
-void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
- enum dma_data_direction dir)
-{
- void *addr = sh_cacheop_vaddr(phys_to_virt(paddr));
-
- switch (dir) {
- case DMA_FROM_DEVICE: /* invalidate only */
- __flush_invalidate_region(addr, size);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- __flush_wback_region(addr, size);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- __flush_purge_region(addr, size);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
deleted file mode 100644
index 758a6c89e911bc..00000000000000
--- a/arch/sh/kernel/dumpstack.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2002 - 2012 Paul Mundt
- */
-#include <linux/kallsyms.h>
-#include <linux/ftrace.h>
-#include <linux/debug_locks.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kdebug.h>
-#include <linux/export.h>
-#include <linux/uaccess.h>
-#include <asm/unwinder.h>
-#include <asm/stacktrace.h>
-
-void dump_mem(const char *str, const char *loglvl, unsigned long bottom,
- unsigned long top)
-{
- unsigned long p;
- int i;
-
- printk("%s%s(0x%08lx to 0x%08lx)\n", loglvl, str, bottom, top);
-
- for (p = bottom & ~31; p < top; ) {
- printk("%s%04lx: ", loglvl, p & 0xffff);
-
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
-
- if (p < bottom || p >= top)
- pr_cont(" ");
- else {
- if (__get_user(val, (unsigned int __user *)p)) {
- pr_cont("\n");
- return;
- }
- pr_cont("%08x ", val);
- }
- }
- pr_cont("\n");
- }
-}
-
-void printk_address(unsigned long address, int reliable)
-{
- pr_cont(" [<%px>] %s%pS\n", (void *) address,
- reliable ? "" : "? ", (void *) address);
-}
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{
- struct task_struct *task = tinfo->task;
- struct ftrace_ret_stack *ret_stack;
- unsigned long ret_addr;
-
- if (addr != (unsigned long)return_to_handler)
- return;
-
- if (!task->ret_stack)
- return;
-
- ret_stack = ftrace_graph_get_ret_stack(task, *graph);
- if (!ret_stack)
- return;
-
- ret_addr = ret_stack->ret;
-
- ops->address(data, ret_addr, 1);
-
- (*graph)++;
-}
-#else
-static inline void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{ }
-#endif
-
-void
-stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- struct thread_info *context;
- int graph = 0;
-
- context = (struct thread_info *)
- ((unsigned long)sp & (~(THREAD_SIZE - 1)));
-
- while (!kstack_end(sp)) {
- unsigned long addr = *sp++;
-
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
-
- print_ftrace_graph_addr(addr, data, ops,
- context, &graph);
- }
- }
-}
-
-/*
- * Print one address/symbol entries per line.
- */
-static void print_trace_address(void *data, unsigned long addr, int reliable)
-{
- printk("%s", (char *)data);
- printk_address(addr, reliable);
-}
-
-static const struct stacktrace_ops print_trace_ops = {
- .address = print_trace_address,
-};
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl)
-{
- if (regs && user_mode(regs))
- return;
-
- printk("%s\nCall trace:\n", loglvl);
-
- unwind_stack(tsk, regs, sp, &print_trace_ops, (void *)loglvl);
-
- pr_cont("\n");
-
- if (!tsk)
- tsk = current;
-
- debug_show_held_locks(tsk);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
-{
- unsigned long stack;
-
- if (!tsk)
- tsk = current;
- if (tsk == current)
- sp = (unsigned long *)current_stack_pointer;
- else
- sp = (unsigned long *)tsk->thread.sp;
-
- stack = (unsigned long)sp;
- dump_mem("Stack: ", loglvl, stack, THREAD_SIZE +
- (unsigned long)task_stack_page(tsk));
- show_trace(tsk, sp, NULL, loglvl);
-}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
deleted file mode 100644
index bf8682e7183030..00000000000000
--- a/arch/sh/kernel/dwarf.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- *
- * This is an implementation of a DWARF unwinder. Its main purpose is
- * for generating stacktrace information. Based on the DWARF 3
- * specification from http://www.dwarfstd.org.
- *
- * TODO:
- * - DWARF64 doesn't work.
- * - Registers with DWARF_VAL_OFFSET rules aren't handled properly.
- */
-
-/* #define DEBUG */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/mempool.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/dwarf.h>
-#include <asm/unwinder.h>
-#include <asm/sections.h>
-#include <asm/unaligned.h>
-#include <asm/stacktrace.h>
-
-/* Reserve enough memory for two stack frames */
-#define DWARF_FRAME_MIN_REQ 2
-/* ... with 4 registers per frame. */
-#define DWARF_REG_MIN_REQ (DWARF_FRAME_MIN_REQ * 4)
-
-static struct kmem_cache *dwarf_frame_cachep;
-static mempool_t *dwarf_frame_pool;
-
-static struct kmem_cache *dwarf_reg_cachep;
-static mempool_t *dwarf_reg_pool;
-
-static struct rb_root cie_root;
-static DEFINE_SPINLOCK(dwarf_cie_lock);
-
-static struct rb_root fde_root;
-static DEFINE_SPINLOCK(dwarf_fde_lock);
-
-static struct dwarf_cie *cached_cie;
-
-static unsigned int dwarf_unwinder_ready;
-
-/**
- * dwarf_frame_alloc_reg - allocate memory for a DWARF register
- * @frame: the DWARF frame whose list of registers we insert on
- * @reg_num: the register number
- *
- * Allocate space for, and initialise, a dwarf reg from
- * dwarf_reg_pool and insert it onto the (unsorted) linked-list of
- * dwarf registers for @frame.
- *
- * Return the initialised DWARF reg.
- */
-static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
- if (!reg) {
- printk(KERN_WARNING "Unable to allocate a DWARF register\n");
- /*
- * Let's just bomb hard here, we have no way to
- * gracefully recover.
- */
- UNWINDER_BUG();
- }
-
- reg->number = reg_num;
- reg->addr = 0;
- reg->flags = 0;
-
- list_add(®->link, &frame->reg_list);
-
- return reg;
-}
-
-static void dwarf_frame_free_regs(struct dwarf_frame *frame)
-{
- struct dwarf_reg *reg, *n;
-
- list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
- list_del(®->link);
- mempool_free(reg, dwarf_reg_pool);
- }
-}
-
-/**
- * dwarf_frame_reg - return a DWARF register
- * @frame: the DWARF frame to search in for @reg_num
- * @reg_num: the register number to search for
- *
- * Lookup and return the dwarf reg @reg_num for this frame. Return
- * NULL if @reg_num is an register invalid number.
- */
-static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- list_for_each_entry(reg, &frame->reg_list, link) {
- if (reg->number == reg_num)
- return reg;
- }
-
- return NULL;
-}
-
-/**
- * dwarf_read_addr - read dwarf data
- * @src: source address of data
- * @dst: destination address to store the data to
- *
- * Read 'n' bytes from @src, where 'n' is the size of an address on
- * the native machine. We return the number of bytes read, which
- * should always be 'n'. We also have to be careful when reading
- * from @src and writing to @dst, because they can be arbitrarily
- * aligned. Return 'n' - the number of bytes read.
- */
-static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
-{
- u32 val = get_unaligned(src);
- put_unaligned(val, dst);
- return sizeof(unsigned long *);
-}
-
-/**
- * dwarf_read_uleb128 - read unsigned LEB128 data
- * @addr: the address where the ULEB128 data is stored
- * @ret: address to store the result
- *
- * Decode an unsigned LEB128 encoded datum. The algorithm is taken
- * from Appendix C of the DWARF 3 spec. For information on the
- * encodings refer to section "7.6 - Variable Length Data". Return
- * the number of bytes read.
- */
-static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
-{
- unsigned int result;
- unsigned char byte;
- int shift, count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- count++;
-
- result |= (byte & 0x7f) << shift;
- shift += 7;
-
- if (!(byte & 0x80))
- break;
- }
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_leb128 - read signed LEB128 data
- * @addr: the address of the LEB128 encoded data
- * @ret: address to store the result
- *
- * Decode signed LEB128 data. The algorithm is taken from Appendix
- * C of the DWARF 3 spec. Return the number of bytes read.
- */
-static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
-{
- unsigned char byte;
- int result, shift;
- int num_bits;
- int count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- result |= (byte & 0x7f) << shift;
- shift += 7;
- count++;
-
- if (!(byte & 0x80))
- break;
- }
-
- /* The number of bits in a signed integer. */
- num_bits = 8 * sizeof(result);
-
- if ((shift < num_bits) && (byte & 0x40))
- result |= (-1 << shift);
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_encoded_value - return the decoded value at @addr
- * @addr: the address of the encoded value
- * @val: where to write the decoded value
- * @encoding: the encoding with which we can decode @addr
- *
- * GCC emits encoded address in the .eh_frame FDE entries. Decode
- * the value at @addr using @encoding. The decoded value is written
- * to @val and the number of bytes read is returned.
- */
-static int dwarf_read_encoded_value(char *addr, unsigned long *val,
- char encoding)
-{
- unsigned long decoded_addr = 0;
- int count = 0;
-
- switch (encoding & 0x70) {
- case DW_EH_PE_absptr:
- break;
- case DW_EH_PE_pcrel:
- decoded_addr = (unsigned long)addr;
- break;
- default:
- pr_debug("encoding=0x%x\n", (encoding & 0x70));
- UNWINDER_BUG();
- }
-
- if ((encoding & 0x07) == 0x00)
- encoding |= DW_EH_PE_udata4;
-
- switch (encoding & 0x0f) {
- case DW_EH_PE_sdata4:
- case DW_EH_PE_udata4:
- count += 4;
- decoded_addr += get_unaligned((u32 *)addr);
- __raw_writel(decoded_addr, val);
- break;
- default:
- pr_debug("encoding=0x%x\n", encoding);
- UNWINDER_BUG();
- }
-
- return count;
-}
-
-/**
- * dwarf_entry_len - return the length of an FDE or CIE
- * @addr: the address of the entry
- * @len: the length of the entry
- *
- * Read the initial_length field of the entry and store the size of
- * the entry in @len. We return the number of bytes read. Return a
- * count of 0 on error.
- */
-static inline int dwarf_entry_len(char *addr, unsigned long *len)
-{
- u32 initial_len;
- int count;
-
- initial_len = get_unaligned((u32 *)addr);
- count = 4;
-
- /*
- * An initial length field value in the range DW_LEN_EXT_LO -
- * DW_LEN_EXT_HI indicates an extension, and should not be
- * interpreted as a length. The only extension that we currently
- * understand is the use of DWARF64 addresses.
- */
- if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
- /*
- * The 64-bit length field immediately follows the
- * compulsory 32-bit length field.
- */
- if (initial_len == DW_EXT_DWARF64) {
- *len = get_unaligned((u64 *)addr + 4);
- count = 12;
- } else {
- printk(KERN_WARNING "Unknown DWARF extension\n");
- count = 0;
- }
- } else
- *len = initial_len;
-
- return count;
-}
-
-/**
- * dwarf_lookup_cie - locate the cie
- * @cie_ptr: pointer to help with lookup
- */
-static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct dwarf_cie *cie = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- /*
- * We've cached the last CIE we looked up because chances are
- * that the FDE wants this CIE.
- */
- if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
- cie = cached_cie;
- goto out;
- }
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
- BUG_ON(!cie_tmp);
-
- if (cie_ptr == cie_tmp->cie_pointer) {
- cie = cie_tmp;
- cached_cie = cie_tmp;
- goto out;
- } else {
- if (cie_ptr < cie_tmp->cie_pointer)
- rb_node = &(*rb_node)->rb_left;
- else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
- return cie;
-}
-
-/**
- * dwarf_lookup_fde - locate the FDE that covers pc
- * @pc: the program counter
- */
-struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct dwarf_fde *fde = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
- BUG_ON(!fde_tmp);
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- if (pc < tmp_start) {
- rb_node = &(*rb_node)->rb_left;
- } else {
- if (pc < tmp_end) {
- fde = fde_tmp;
- goto out;
- } else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return fde;
-}
-
-/**
- * dwarf_cfa_execute_insns - execute instructions to calculate a CFA
- * @insn_start: address of the first instruction
- * @insn_end: address of the last instruction
- * @cie: the CIE for this function
- * @fde: the FDE for this function
- * @frame: the instructions calculate the CFA for this frame
- * @pc: the program counter of the address we're interested in
- *
- * Execute the Call Frame instruction sequence starting at
- * @insn_start and ending at @insn_end. The instructions describe
- * how to calculate the Canonical Frame Address of a stackframe.
- * Store the results in @frame.
- */
-static int dwarf_cfa_execute_insns(unsigned char *insn_start,
- unsigned char *insn_end,
- struct dwarf_cie *cie,
- struct dwarf_fde *fde,
- struct dwarf_frame *frame,
- unsigned long pc)
-{
- unsigned char insn;
- unsigned char *current_insn;
- unsigned int count, delta, reg, expr_len, offset;
- struct dwarf_reg *regp;
-
- current_insn = insn_start;
-
- while (current_insn < insn_end && frame->pc <= pc) {
- insn = __raw_readb(current_insn++);
-
- /*
- * Firstly, handle the opcodes that embed their operands
- * in the instructions.
- */
- switch (DW_CFA_opcode(insn)) {
- case DW_CFA_advance_loc:
- delta = DW_CFA_operand(insn);
- delta *= cie->code_alignment_factor;
- frame->pc += delta;
- continue;
- /* NOTREACHED */
- case DW_CFA_offset:
- reg = DW_CFA_operand(insn);
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->addr = offset;
- regp->flags |= DWARF_REG_OFFSET;
- continue;
- /* NOTREACHED */
- case DW_CFA_restore:
- reg = DW_CFA_operand(insn);
- continue;
- /* NOTREACHED */
- }
-
- /*
- * Secondly, handle the opcodes that don't embed their
- * operands in the instruction.
- */
- switch (insn) {
- case DW_CFA_nop:
- continue;
- case DW_CFA_advance_loc1:
- delta = *current_insn++;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc2:
- delta = get_unaligned((u16 *)current_insn);
- current_insn += 2;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc4:
- delta = get_unaligned((u32 *)current_insn);
- current_insn += 4;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- break;
- case DW_CFA_restore_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- break;
- case DW_CFA_undefined:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_UNDEFINED;
- break;
- case DW_CFA_def_cfa:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_offset);
- current_insn += count;
-
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_register:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_offset:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- frame->cfa_offset = offset;
- break;
- case DW_CFA_def_cfa_expression:
- count = dwarf_read_uleb128(current_insn, &expr_len);
- current_insn += count;
-
- frame->cfa_expr = current_insn;
- frame->cfa_expr_len = expr_len;
- current_insn += expr_len;
-
- frame->flags |= DWARF_FRAME_CFA_REG_EXP;
- break;
- case DW_CFA_offset_extended_sf:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_val_offset:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_VAL_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_GNU_args_size:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- break;
- case DW_CFA_GNU_negative_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
-
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = -offset;
- break;
- default:
- pr_debug("unhandled DWARF instruction 0x%x\n", insn);
- UNWINDER_BUG();
- break;
- }
- }
-
- return 0;
-}
-
-/**
- * dwarf_free_frame - free the memory allocated for @frame
- * @frame: the frame to free
- */
-void dwarf_free_frame(struct dwarf_frame *frame)
-{
- dwarf_frame_free_regs(frame);
- mempool_free(frame, dwarf_frame_pool);
-}
-
-extern void ret_from_irq(void);
-
-/**
- * dwarf_unwind_stack - unwind the stack
- *
- * @pc: address of the function to unwind
- * @prev: struct dwarf_frame of the previous stackframe on the callstack
- *
- * Return a struct dwarf_frame representing the most recent frame
- * on the callstack. Each of the lower (older) stack frames are
- * linked via the "prev" member.
- */
-struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
- struct dwarf_frame *prev)
-{
- struct dwarf_frame *frame;
- struct dwarf_cie *cie;
- struct dwarf_fde *fde;
- struct dwarf_reg *reg;
- unsigned long addr;
-
- /*
- * If we've been called in to before initialization has
- * completed, bail out immediately.
- */
- if (!dwarf_unwinder_ready)
- return NULL;
-
- /*
- * If we're starting at the top of the stack we need get the
- * contents of a physical register to get the CFA in order to
- * begin the virtual unwinding of the stack.
- *
- * NOTE: the return address is guaranteed to be setup by the
- * time this function makes its first function call.
- */
- if (!pc || !prev)
- pc = _THIS_IP_;
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- /*
- * If our stack has been patched by the function graph tracer
- * then we might see the address of return_to_handler() where we
- * expected to find the real return address.
- */
- if (pc == (unsigned long)&return_to_handler) {
- struct ftrace_ret_stack *ret_stack;
-
- ret_stack = ftrace_graph_get_ret_stack(current, 0);
- if (ret_stack)
- pc = ret_stack->ret;
- /*
- * We currently have no way of tracking how many
- * return_to_handler()'s we've seen. If there is more
- * than one patched return address on our stack,
- * complain loudly.
- */
- WARN_ON(ftrace_graph_get_ret_stack(current, 1));
- }
-#endif
-
- frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
- if (!frame) {
- printk(KERN_ERR "Unable to allocate a dwarf frame\n");
- UNWINDER_BUG();
- }
-
- INIT_LIST_HEAD(&frame->reg_list);
- frame->flags = 0;
- frame->prev = prev;
- frame->return_addr = 0;
-
- fde = dwarf_lookup_fde(pc);
- if (!fde) {
- /*
- * This is our normal exit path. There are two reasons
- * why we might exit here,
- *
- * a) pc has no asscociated DWARF frame info and so
- * we don't know how to unwind this frame. This is
- * usually the case when we're trying to unwind a
- * frame that was called from some assembly code
- * that has no DWARF info, e.g. syscalls.
- *
- * b) the DEBUG info for pc is bogus. There's
- * really no way to distinguish this case from the
- * case above, which sucks because we could print a
- * warning here.
- */
- goto bail;
- }
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
-
- frame->pc = fde->initial_location;
-
- /* CIE initial instructions */
- dwarf_cfa_execute_insns(cie->initial_instructions,
- cie->instructions_end, cie, fde,
- frame, pc);
-
- /* FDE instructions */
- dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
- fde, frame, pc);
-
- /* Calculate the CFA */
- switch (frame->flags) {
- case DWARF_FRAME_CFA_REG_OFFSET:
- if (prev) {
- reg = dwarf_frame_reg(prev, frame->cfa_register);
- UNWINDER_BUG_ON(!reg);
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = prev->cfa + reg->addr;
- frame->cfa = __raw_readl(addr);
-
- } else {
- /*
- * Again, we're starting from the top of the
- * stack. We need to physically read
- * the contents of a register in order to get
- * the Canonical Frame Address for this
- * function.
- */
- frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
- }
-
- frame->cfa += frame->cfa_offset;
- break;
- default:
- UNWINDER_BUG();
- }
-
- reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
-
- /*
- * If we haven't seen the return address register or the return
- * address column is undefined then we must assume that this is
- * the end of the callstack.
- */
- if (!reg || reg->flags == DWARF_UNDEFINED)
- goto bail;
-
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = frame->cfa + reg->addr;
- frame->return_addr = __raw_readl(addr);
-
- /*
- * Ah, the joys of unwinding through interrupts.
- *
- * Interrupts are tricky - the DWARF info needs to be _really_
- * accurate and unfortunately I'm seeing a lot of bogus DWARF
- * info. For example, I've seen interrupts occur in epilogues
- * just after the frame pointer (r14) had been restored. The
- * problem was that the DWARF info claimed that the CFA could be
- * reached by using the value of the frame pointer before it was
- * restored.
- *
- * So until the compiler can be trusted to produce reliable
- * DWARF info when it really matters, let's stop unwinding once
- * we've calculated the function that was interrupted.
- */
- if (prev && prev->pc == (unsigned long)ret_from_irq)
- frame->return_addr = 0;
-
- return frame;
-
-bail:
- dwarf_free_frame(frame);
- return NULL;
-}
-
-static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
-
- cie = kzalloc(sizeof(*cie), GFP_KERNEL);
- if (!cie)
- return -ENOMEM;
-
- cie->length = len;
-
- /*
- * Record the offset into the .eh_frame section
- * for this CIE. It allows this CIE to be
- * quickly and easily looked up from the
- * corresponding FDE.
- */
- cie->cie_pointer = (unsigned long)entry;
-
- cie->version = *(char *)p++;
- UNWINDER_BUG_ON(cie->version != 1);
-
- cie->augmentation = p;
- p += strlen(cie->augmentation) + 1;
-
- count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
- p += count;
-
- count = dwarf_read_leb128(p, &cie->data_alignment_factor);
- p += count;
-
- /*
- * Which column in the rule table contains the
- * return address?
- */
- if (cie->version == 1) {
- cie->return_address_reg = __raw_readb(p);
- p++;
- } else {
- count = dwarf_read_uleb128(p, &cie->return_address_reg);
- p += count;
- }
-
- if (cie->augmentation[0] == 'z') {
- unsigned int length, count;
- cie->flags |= DWARF_CIE_Z_AUGMENTATION;
-
- count = dwarf_read_uleb128(p, &length);
- p += count;
-
- UNWINDER_BUG_ON((unsigned char *)p > end);
-
- cie->initial_instructions = p + length;
- cie->augmentation++;
- }
-
- while (*cie->augmentation) {
- /*
- * "L" indicates a byte showing how the
- * LSDA pointer is encoded. Skip it.
- */
- if (*cie->augmentation == 'L') {
- p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'R') {
- /*
- * "R" indicates a byte showing
- * how FDE addresses are
- * encoded.
- */
- cie->encoding = *(char *)p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'P') {
- /*
- * "R" indicates a personality
- * routine in the CIE
- * augmentation.
- */
- UNWINDER_BUG();
- } else if (*cie->augmentation == 'S') {
- UNWINDER_BUG();
- } else {
- /*
- * Unknown augmentation. Assume
- * 'z' augmentation.
- */
- p = cie->initial_instructions;
- UNWINDER_BUG_ON(!p);
- break;
- }
- }
-
- cie->initial_instructions = p;
- cie->instructions_end = end;
-
- /* Add to list */
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
-
- parent = *rb_node;
-
- if (cie->cie_pointer < cie_tmp->cie_pointer)
- rb_node = &parent->rb_left;
- else if (cie->cie_pointer >= cie_tmp->cie_pointer)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&cie->node, parent, rb_node);
- rb_insert_color(&cie->node, &cie_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&cie->link, &mod->arch.cie_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- return 0;
-}
-
-static int dwarf_parse_fde(void *entry, u32 entry_type,
- void *start, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_fde *fde;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
- void *p = start;
-
- fde = kzalloc(sizeof(*fde), GFP_KERNEL);
- if (!fde)
- return -ENOMEM;
-
- fde->length = len;
-
- /*
- * In a .eh_frame section the CIE pointer is the
- * delta between the address within the FDE
- */
- fde->cie_pointer = (unsigned long)(p - entry_type - 4);
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
- fde->cie = cie;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->initial_location,
- cie->encoding);
- else
- count = dwarf_read_addr(p, &fde->initial_location);
-
- p += count;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->address_range,
- cie->encoding & 0x0f);
- else
- count = dwarf_read_addr(p, &fde->address_range);
-
- p += count;
-
- if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
- unsigned int length;
- count = dwarf_read_uleb128(p, &length);
- p += count + length;
- }
-
- /* Call frame instructions. */
- fde->instructions = p;
- fde->end = end;
-
- /* Add to list. */
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
- unsigned long start, end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
-
- start = fde->initial_location;
- end = fde->initial_location + fde->address_range;
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- parent = *rb_node;
-
- if (start < tmp_start)
- rb_node = &parent->rb_left;
- else if (start >= tmp_end)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&fde->node, parent, rb_node);
- rb_insert_color(&fde->node, &fde_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&fde->link, &mod->arch.fde_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return 0;
-}
-
-static void dwarf_unwinder_dump(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *sp,
- const struct stacktrace_ops *ops,
- void *data)
-{
- struct dwarf_frame *frame, *_frame;
- unsigned long return_addr;
-
- _frame = NULL;
- return_addr = 0;
-
- while (1) {
- frame = dwarf_unwind_stack(return_addr, _frame);
-
- if (_frame)
- dwarf_free_frame(_frame);
-
- _frame = frame;
-
- if (!frame || !frame->return_addr)
- break;
-
- return_addr = frame->return_addr;
- ops->address(data, return_addr, 1);
- }
-
- if (frame)
- dwarf_free_frame(frame);
-}
-
-static struct unwinder dwarf_unwinder = {
- .name = "dwarf-unwinder",
- .dump = dwarf_unwinder_dump,
- .rating = 150,
-};
-
-static void __init dwarf_unwinder_cleanup(void)
-{
- struct dwarf_fde *fde, *next_fde;
- struct dwarf_cie *cie, *next_cie;
-
- /*
- * Deallocate all the memory allocated for the DWARF unwinder.
- * Traverse all the FDE/CIE lists and remove and free all the
- * memory associated with those data structures.
- */
- rbtree_postorder_for_each_entry_safe(fde, next_fde, &fde_root, node)
- kfree(fde);
-
- rbtree_postorder_for_each_entry_safe(cie, next_cie, &cie_root, node)
- kfree(cie);
-
- mempool_destroy(dwarf_reg_pool);
- mempool_destroy(dwarf_frame_pool);
- kmem_cache_destroy(dwarf_reg_cachep);
- kmem_cache_destroy(dwarf_frame_cachep);
-}
-
-/**
- * dwarf_parse_section - parse DWARF section
- * @eh_frame_start: start address of the .eh_frame section
- * @eh_frame_end: end address of the .eh_frame section
- * @mod: the kernel module containing the .eh_frame section
- *
- * Parse the information in a .eh_frame section.
- */
-static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
- struct module *mod)
-{
- u32 entry_type;
- void *p, *entry;
- int count, err = 0;
- unsigned long len = 0;
- unsigned int c_entries, f_entries;
- unsigned char *end;
-
- c_entries = 0;
- f_entries = 0;
- entry = eh_frame_start;
-
- while ((char *)entry < eh_frame_end) {
- p = entry;
-
- count = dwarf_entry_len(p, &len);
- if (count == 0) {
- /*
- * We read a bogus length field value. There is
- * nothing we can do here apart from disabling
- * the DWARF unwinder. We can't even skip this
- * entry and move to the next one because 'len'
- * tells us where our next entry is.
- */
- err = -EINVAL;
- goto out;
- } else
- p += count;
-
- /* initial length does not include itself */
- end = p + len;
-
- entry_type = get_unaligned((u32 *)p);
- p += 4;
-
- if (entry_type == DW_EH_FRAME_CIE) {
- err = dwarf_parse_cie(entry, p, len, end, mod);
- if (err < 0)
- goto out;
- else
- c_entries++;
- } else {
- err = dwarf_parse_fde(entry, entry_type, p, len,
- end, mod);
- if (err < 0)
- goto out;
- else
- f_entries++;
- }
-
- entry = (char *)entry + len + 4;
- }
-
- printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
- c_entries, f_entries);
-
- return 0;
-
-out:
- return err;
-}
-
-#ifdef CONFIG_MODULES
-int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *me)
-{
- unsigned int i, err;
- unsigned long start, end;
- char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
- start = end = 0;
-
- for (i = 1; i < hdr->e_shnum; i++) {
- /* Alloc bit cleared means "ignore it." */
- if ((sechdrs[i].sh_flags & SHF_ALLOC)
- && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
- start = sechdrs[i].sh_addr;
- end = start + sechdrs[i].sh_size;
- break;
- }
- }
-
- /* Did we find the .eh_frame section? */
- if (i != hdr->e_shnum) {
- INIT_LIST_HEAD(&me->arch.cie_list);
- INIT_LIST_HEAD(&me->arch.fde_list);
- err = dwarf_parse_section((char *)start, (char *)end, me);
- if (err) {
- printk(KERN_WARNING "%s: failed to parse DWARF info\n",
- me->name);
- return err;
- }
- }
-
- return 0;
-}
-
-/**
- * module_dwarf_cleanup - remove FDE/CIEs associated with @mod
- * @mod: the module that is being unloaded
- *
- * Remove any FDEs and CIEs from the global lists that came from
- * @mod's .eh_frame section because @mod is being unloaded.
- */
-void module_dwarf_cleanup(struct module *mod)
-{
- struct dwarf_fde *fde, *ftmp;
- struct dwarf_cie *cie, *ctmp;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
- list_del(&cie->link);
- rb_erase(&cie->node, &cie_root);
- kfree(cie);
- }
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
- list_del(&fde->link);
- rb_erase(&fde->node, &fde_root);
- kfree(fde);
- }
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-}
-#endif /* CONFIG_MODULES */
-
-/**
- * dwarf_unwinder_init - initialise the dwarf unwinder
- *
- * Build the data structures describing the .dwarf_frame section to
- * make it easier to lookup CIE and FDE entries. Because the
- * .eh_frame section is packed as tightly as possible it is not
- * easy to lookup the FDE for a given PC, so we build a list of FDE
- * and CIE entries that make it easier.
- */
-static int __init dwarf_unwinder_init(void)
-{
- int err = -ENOMEM;
-
- dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
- sizeof(struct dwarf_frame), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
- sizeof(struct dwarf_reg), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_frame_pool = mempool_create_slab_pool(DWARF_FRAME_MIN_REQ,
- dwarf_frame_cachep);
- if (!dwarf_frame_pool)
- goto out;
-
- dwarf_reg_pool = mempool_create_slab_pool(DWARF_REG_MIN_REQ,
- dwarf_reg_cachep);
- if (!dwarf_reg_pool)
- goto out;
-
- err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
- if (err)
- goto out;
-
- err = unwinder_register(&dwarf_unwinder);
- if (err)
- goto out;
-
- dwarf_unwinder_ready = 1;
-
- return 0;
-
-out:
- printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
- dwarf_unwinder_cleanup();
- return err;
-}
-early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
deleted file mode 100644
index 91ab2607a1ff9f..00000000000000
--- a/arch/sh/kernel/entry-common.S
+++ /dev/null
@@ -1,400 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-#include <asm/dwarf.h>
-
-#if defined(CONFIG_PREEMPTION)
-# define preempt_stop() cli ; TRACE_IRQS_OFF
-#else
-# define preempt_stop()
-# define resume_kernel __restore_all
-#endif
-
-
- .align 2
-ENTRY(exception_error)
- !
- TRACE_IRQS_ON
- sti
- mov.l 1f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long do_exception_error
-
- .align 2
-ret_from_exception:
- CFI_STARTPROC simple
- CFI_DEF_CFA r14, 0
- CFI_REL_OFFSET 17, 64
- CFI_REL_OFFSET 15, 60
- CFI_REL_OFFSET 14, 56
- CFI_REL_OFFSET 13, 52
- CFI_REL_OFFSET 12, 48
- CFI_REL_OFFSET 11, 44
- CFI_REL_OFFSET 10, 40
- CFI_REL_OFFSET 9, 36
- CFI_REL_OFFSET 8, 32
- preempt_stop()
-ENTRY(ret_from_irq)
- !
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shll r0
- shll r0 ! kernel space?
- get_current_thread_info r8, r0
- bt resume_kernel ! Yes, it's from kernel, go back soon
-
-#ifdef CONFIG_PREEMPTION
- bra resume_userspace
- nop
-ENTRY(resume_kernel)
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
- tst r0, r0
- bf noresched
-need_resched:
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
- bt noresched
-
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shlr r0
- and #(0xf0>>1), r0 ! interrupts off (exception path)?
- cmp/eq #(0xf0>>1), r0
- bt noresched
- mov.l 1f, r0
- jsr @r0 ! call preempt_schedule_irq
- nop
- bra need_resched
- nop
-
-noresched:
- bra __restore_all
- nop
-
- .align 2
-1: .long preempt_schedule_irq
-#endif
-
-ENTRY(resume_userspace)
- ! r8: current_thread_info
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt/s __restore_all
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-work_pending:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- ! t: result of "tst #_TIF_NEED_RESCHED, r0"
- bf/s work_resched
- tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
-work_notifysig:
- bt/s __restore_all
- mov r15, r4
- mov r12, r5 ! set arg1(save_r0)
- mov r0, r6
- sti
- mov.l 2f, r1
- mov.l 3f, r0
- jmp @r1
- lds r0, pr
-work_resched:
- mov.l 1f, r1
- jsr @r1 ! schedule
- nop
- cli
- TRACE_IRQS_OFF
- !
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt __restore_all
- bra work_pending
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-1: .long schedule
-2: .long do_notify_resume
-3: .long resume_userspace
-
- .align 2
-syscall_exit_work:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- tst #(_TIF_WORK_SYSCALL_MASK & 0xff), r0
- bt/s work_pending
- tst #_TIF_NEED_RESCHED, r0
- TRACE_IRQS_ON
- sti
- mov r15, r4
- mov.l 8f, r0 ! do_syscall_trace_leave
- jsr @r0
- nop
- bra resume_userspace
- nop
-
-__restore_all:
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
-
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bt 1f
- TRACE_IRQS_ON
- bra 2f
- nop
-1:
- TRACE_IRQS_OFF
-2:
- mov.l 3f, r0
- jmp @r0
- nop
-
- .align 2
-3: .long restore_all
-
- .align 2
-syscall_badsys: ! Bad syscall number
- get_current_thread_info r8, r0
- mov #-ENOSYS, r0
- bra resume_userspace
- mov.l r0, @(OFF_R0,r15) ! Return value
-
-/*
- * The main debug trap handler.
- *
- * r8=TRA (not the trap number!)
- *
- * Note: This assumes that the trapa value is left in its original
- * form (without the shlr2 shift) so the calculation for the jump
- * call table offset remains a simple in place mask.
- */
-debug_trap:
- mov r8, r0
- and #(0xf << 2), r0
- mov.l 1f, r8
- add r0, r8
- mov.l @r8, r8
- jsr @r8
- nop
- bra ret_from_exception
- nop
- CFI_ENDPROC
-
- .align 2
-1: .long debug_trap_table
-
-/*
- * Syscall interface:
- *
- * Syscall #: R3
- * Arguments #0 to #3: R4--R7
- * Arguments #4 to #6: R0, R1, R2
- * TRA: See following table.
- *
- * (TRA>>2) Purpose
- * -------- -------
- * 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
- * 0x10-0x1f general SH-3/4 syscall ABI.
- * 0x1f unified SH-2/3/4 syscall ABI (preferred).
- * 0x20-0x2f original SH-2 syscall ABI.
- * 0x30-0x3f debug traps used by the kernel.
- * 0x40-0xff Not supported by all parts, so left unhandled.
- *
- * For making system calls, any trap number in the range for the
- * given cpu model may be used, but the unified trap number 0x1f is
- * preferred for compatibility with all models.
- *
- * The low bits of the trap number were once documented as matching
- * the number of arguments, but they were never actually used as such
- * by the kernel. SH-2 originally used its own separate trap range
- * because several hardware exceptions fell in the range used for the
- * SH-3/4 syscall ABI.
- *
- * This code also handles delegating other traps to the BIOS/gdb stub.
- *
- * Note: When we're first called, the TRA value must be shifted
- * right 2 bits in order to get the value that was used as the "trapa"
- * argument.
- */
-
- .align 2
- .globl ret_from_fork
-ret_from_fork:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- bra syscall_exit
- nop
-
- .align 2
- .globl ret_from_kernel_thread
-ret_from_kernel_thread:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- mov.l @(OFF_R5,r15), r5 ! fn
- jsr @r5
- mov.l @(OFF_R4,r15), r4 ! arg
- bra syscall_exit
- nop
-
- .align 2
-1: .long schedule_tail
-
-/*
- * The poorly named main trapa decode and dispatch routine, for
- * system calls and debug traps through their respective jump tables.
- */
-ENTRY(system_call)
- setup_frame_reg
-#if !defined(CONFIG_CPU_SH2)
- mov.l 1f, r9
- mov.l @r9, r8 ! Read from TRA (Trap Address) Register
-#endif
-
- mov #OFF_TRA, r10
- add r15, r10
- mov.l r8, @r10 ! set TRA value to tra
-
- /*
- * Check the trap type
- */
- mov #((0x20 << 2) - 1), r9
- cmp/hi r9, r8
- bt/s debug_trap ! it's a debug trap..
- nop
-
- TRACE_IRQS_ON
- sti
-
- !
- get_current_thread_info r8, r10
- mov.l @(TI_FLAGS,r8), r8
- mov #(_TIF_WORK_SYSCALL_MASK & 0xff), r10
- mov #(_TIF_WORK_SYSCALL_MASK >> 8), r9
- tst r10, r8
- shll8 r9
- bf syscall_trace_entry
- tst r9, r8
- bf syscall_trace_entry
- !
- mov.l 6f, r8 ! Number of syscalls
- cmp/hs r8, r3
- bt syscall_badsys
- !
-syscall_call:
- shll2 r3 ! x4
- mov.l 3f, r8 ! Load the address of sys_call_table
- add r8, r3
- mov.l @r3, r8
- mov.l @(OFF_R2,r15), r2
- mov.l @(OFF_R1,r15), r1
- mov.l @(OFF_R0,r15), r0
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
- jsr @r8 ! jump to specific syscall handler
- nop
- add #12, r15
- mov.l @(OFF_R0,r15), r12 ! save r0
- mov.l r0, @(OFF_R0,r15) ! save the return value
- !
-syscall_exit:
- cli
- TRACE_IRQS_OFF
- !
- get_current_thread_info r8, r0
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_ALLWORK_MASK & 0xff), r0
- mov #(_TIF_ALLWORK_MASK >> 8), r1
- bf syscall_exit_work
- shlr8 r0
- tst r0, r1
- bf syscall_exit_work
- bra __restore_all
- nop
-
- .align 2
-syscall_trace_entry:
- ! Yes it is traced.
- mov r15, r4
- mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies
- jsr @r11 ! superior (will chomp R[0-7])
- nop
- cmp/eq #-1, r0
- bt syscall_exit
- ! Reload R0-R4 from kernel stack, where the
- ! parent may have modified them using
- ! ptrace(POKEUSR). (Note that R0-R2 are
- ! reloaded from the kernel stack by syscall_call
- ! below, so don't need to be reloaded here.)
- ! This allows the parent to rewrite system calls
- ! and args on the fly.
- mov.l @(OFF_R4,r15), r4 ! arg0
- mov.l @(OFF_R5,r15), r5
- mov.l @(OFF_R6,r15), r6
- mov.l @(OFF_R7,r15), r7 ! arg3
- mov.l @(OFF_R3,r15), r3 ! syscall_nr
- !
- mov.l 6f, r10 ! Number of syscalls
- cmp/hs r10, r3
- bf syscall_call
- mov #-ENOSYS, r0
- bra syscall_exit
- mov.l r0, @(OFF_R0,r15) ! Return value
-
- .align 2
-#if !defined(CONFIG_CPU_SH2)
-1: .long TRA
-#endif
-6: .long NR_syscalls
-3: .long sys_call_table
-7: .long do_syscall_trace_enter
-8: .long do_syscall_trace_leave
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
deleted file mode 100644
index 930001bb8c6a67..00000000000000
--- a/arch/sh/kernel/ftrace.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org>
- * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org>
- *
- * Code for replacing ftrace calls with jumps.
- *
- * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- *
- * Thanks goes to Ingo Molnar, for suggesting the idea.
- * Mathieu Desnoyers, for suggesting postponing the modifications.
- * Arjan van de Ven, for keeping me straight, and explaining to me
- * the dangers of modifying code on the run.
- */
-#include <linux/uaccess.h>
-#include <linux/ftrace.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/ftrace.h>
-#include <asm/cacheflush.h>
-#include <asm/unistd.h>
-#include <trace/syscall.h>
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
-
-static unsigned char ftrace_nop[4];
-/*
- * If we're trying to nop out a call to a function, we instead
- * place a call to the address after the memory table.
- *
- * 8c011060 <a>:
- * 8c011060: 02 d1 mov.l 8c01106c <a+0xc>,r1
- * 8c011062: 22 4f sts.l pr,@-r15
- * 8c011064: 02 c7 mova 8c011070 <a+0x10>,r0
- * 8c011066: 2b 41 jmp @r1
- * 8c011068: 2a 40 lds r0,pr
- * 8c01106a: 09 00 nop
- * 8c01106c: 68 24 .word 0x2468 <--- ip
- * 8c01106e: 1d 8c .word 0x8c1d
- * 8c011070: 26 4f lds.l @r15+,pr <--- ip + MCOUNT_INSN_SIZE
- *
- * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch
- * past the _mcount call and continue executing code like normal.
- */
-static unsigned char *ftrace_nop_replace(unsigned long ip)
-{
- __raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop);
- return ftrace_nop;
-}
-
-static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
-{
- /* Place the address in the memory table. */
- __raw_writel(addr, ftrace_replaced_code);
-
- /*
- * No locking needed, this must be called via kstop_machine
- * which in essence is like running on a uniprocessor machine.
- */
- return ftrace_replaced_code;
-}
-
-/*
- * Modifying code must take extra care. On an SMP machine, if
- * the code being modified is also being executed on another CPU
- * that CPU will have undefined results and possibly take a GPF.
- * We use kstop_machine to stop other CPUS from executing code.
- * But this does not stop NMIs from happening. We still need
- * to protect against that. We separate out the modification of
- * the code to take care of this.
- *
- * Two buffers are added: An IP buffer and a "code" buffer.
- *
- * 1) Put the instruction pointer into the IP buffer
- * and the new code into the "code" buffer.
- * 2) Wait for any running NMIs to finish and set a flag that says
- * we are modifying code, it is done in an atomic operation.
- * 3) Write the code
- * 4) clear the flag.
- * 5) Wait for any running NMIs to finish.
- *
- * If an NMI is executed, the first thing it does is to call
- * "ftrace_nmi_enter". This will check if the flag is set to write
- * and if it is, it will write what is in the IP and "code" buffers.
- *
- * The trick is, it does not matter if everyone is writing the same
- * content to the code location. Also, if a CPU is executing code
- * it is OK to write to that code location if the contents being written
- * are the same as what exists.
- */
-#define MOD_CODE_WRITE_FLAG (1 << 31) /* set when NMI should do the write */
-static atomic_t nmi_running = ATOMIC_INIT(0);
-static int mod_code_status; /* holds return value of text write */
-static void *mod_code_ip; /* holds the IP to write to */
-static void *mod_code_newcode; /* holds the text to write to the IP */
-
-static void clear_mod_flag(void)
-{
- int old = atomic_read(&nmi_running);
-
- for (;;) {
- int new = old & ~MOD_CODE_WRITE_FLAG;
-
- if (old == new)
- break;
-
- old = atomic_cmpxchg(&nmi_running, old, new);
- }
-}
-
-static void ftrace_mod_code(void)
-{
- /*
- * Yes, more than one CPU process can be writing to mod_code_status.
- * (and the code itself)
- * But if one were to fail, then they all should, and if one were
- * to succeed, then they all should.
- */
- mod_code_status = copy_to_kernel_nofault(mod_code_ip, mod_code_newcode,
- MCOUNT_INSN_SIZE);
-
- /* if we fail, then kill any new writers */
- if (mod_code_status)
- clear_mod_flag();
-}
-
-void arch_ftrace_nmi_enter(void)
-{
- if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
- smp_rmb();
- ftrace_mod_code();
- }
- /* Must have previous changes seen before executions */
- smp_mb();
-}
-
-void arch_ftrace_nmi_exit(void)
-{
- /* Finish all executions before clearing nmi_running */
- smp_mb();
- atomic_dec(&nmi_running);
-}
-
-static void wait_for_nmi_and_set_mod_flag(void)
-{
- if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
- return;
-
- do {
- cpu_relax();
- } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
-}
-
-static void wait_for_nmi(void)
-{
- if (!atomic_read(&nmi_running))
- return;
-
- do {
- cpu_relax();
- } while (atomic_read(&nmi_running));
-}
-
-static int
-do_ftrace_mod_code(unsigned long ip, void *new_code)
-{
- mod_code_ip = (void *)ip;
- mod_code_newcode = new_code;
-
- /* The buffers need to be visible before we let NMIs write them */
- smp_mb();
-
- wait_for_nmi_and_set_mod_flag();
-
- /* Make sure all running NMIs have finished before we write the code */
- smp_mb();
-
- ftrace_mod_code();
-
- /* Make sure the write happens before clearing the bit */
- smp_mb();
-
- clear_mod_flag();
- wait_for_nmi();
-
- return mod_code_status;
-}
-
-static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
- unsigned char *new_code)
-{
- unsigned char replaced[MCOUNT_INSN_SIZE];
-
- /*
- * Note:
- * We are paranoid about modifying text, as if a bug was to happen, it
- * could cause us to read or write to someplace that could cause harm.
- * Carefully read and modify the code with probe_kernel_*(), and make
- * sure what we read is what we expected it to be before modifying it.
- */
-
- /* read the text we want to modify */
- if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- /* Make sure it is what we expect it to be */
- if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
- return -EINVAL;
-
- /* replace the text with the new text */
- if (do_ftrace_mod_code(ip, new_code))
- return -EPERM;
-
- flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
-
- return 0;
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
- unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET;
- unsigned char old[MCOUNT_INSN_SIZE], *new;
-
- memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
-
- return ftrace_modify_code(ip, old, new);
-}
-
-int ftrace_make_nop(struct module *mod,
- struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_call_replace(ip, addr);
- new = ftrace_nop_replace(ip);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_nop_replace(ip);
- new = ftrace_call_replace(ip, addr);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void ftrace_graph_call(void);
-
-static int ftrace_mod(unsigned long ip, unsigned long old_addr,
- unsigned long new_addr)
-{
- unsigned char code[MCOUNT_INSN_SIZE];
-
- if (copy_from_kernel_nofault(code, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- if (old_addr != __raw_readl((unsigned long *)code))
- return -EINVAL;
-
- __raw_writel(new_addr, ip);
- return 0;
-}
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&skip_trace);
- new_addr = (unsigned long)(&ftrace_graph_caller);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&ftrace_graph_caller);
- new_addr = (unsigned long)(&skip_trace);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-/*
- * Hook the return address and push it in the stack of return addrs
- * in the current thread info.
- *
- * This is the main routine for the function graph tracer. The function
- * graph tracer essentially works like this:
- *
- * parent is the stack address containing self_addr's return address.
- * We pull the real return address out of parent and store it in
- * current's ret_stack. Then, we replace the return address on the stack
- * with the address of return_to_handler. self_addr is the function that
- * called mcount.
- *
- * When self_addr returns, it will jump to return_to_handler which calls
- * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
- * return address off of current's ret_stack and jump to it.
- */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
-{
- unsigned long old;
- int faulted;
- unsigned long return_hooker = (unsigned long)&return_to_handler;
-
- if (unlikely(ftrace_graph_is_dead()))
- return;
-
- if (unlikely(atomic_read(¤t->tracing_graph_pause)))
- return;
-
- /*
- * Protect against fault, even if it shouldn't
- * happen. This tool is too much intrusive to
- * ignore such a protection.
- */
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%2, %0 \n\t"
- "2: \n\t"
- "mov.l %3, @%2 \n\t"
- "mov #0, %1 \n\t"
- "3: \n\t"
- ".section .fixup, \"ax\" \n\t"
- "4: \n\t"
- "mov.l 5f, %0 \n\t"
- "jmp @%0 \n\t"
- " mov #1, %1 \n\t"
- ".balign 4 \n\t"
- "5: .long 3b \n\t"
- ".previous \n\t"
- ".section __ex_table,\"a\" \n\t"
- ".long 1b, 4b \n\t"
- ".long 2b, 4b \n\t"
- ".previous \n\t"
- : "=&r" (old), "=r" (faulted)
- : "r" (parent), "r" (return_hooker)
- );
-
- if (unlikely(faulted)) {
- ftrace_graph_stop();
- WARN_ON(1);
- return;
- }
-
- if (function_graph_enter(old, self_addr, 0, NULL))
- __raw_writel(old, parent);
-}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
deleted file mode 100644
index 4adbd4ade31946..00000000000000
--- a/arch/sh/kernel/head_32.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- * $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $
- *
- * arch/sh/kernel/head.S
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2010 Matt Fleming
- *
- * Head.S contains the SH exception handlers and startup code.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/mmu.h>
-#include <cpu/mmu_context.h>
-
-#ifdef CONFIG_CPU_SH4A
-#define SYNCO() synco
-
-#define PREFI(label, reg) \
- mov.l label, reg; \
- prefi @reg
-#else
-#define SYNCO()
-#define PREFI(label, reg)
-#endif
-
- .section .empty_zero_page, "aw"
-ENTRY(empty_zero_page)
- .long 1 /* MOUNT_ROOT_RDONLY */
- .long 0 /* RAMDISK_FLAGS */
- .long 0x0200 /* ORIG_ROOT_DEV */
- .long 1 /* LOADER_TYPE */
- .long 0x00000000 /* INITRD_START */
- .long 0x00000000 /* INITRD_SIZE */
-#ifdef CONFIG_32BIT
- .long 0x53453f00 + 32 /* "SE?" = 32 bit */
-#else
- .long 0x53453f00 + 29 /* "SE?" = 29 bit */
-#endif
-1:
- .skip PAGE_SIZE - empty_zero_page - 1b
-
- __HEAD
-
-/*
- * Condition at the entry of _stext:
- *
- * BSC has already been initialized.
- * INTC may or may not be initialized.
- * VBR may or may not be initialized.
- * MMU may or may not be initialized.
- * Cache may or may not be initialized.
- * Hardware (including on-chip modules) may or may not be initialized.
- *
- */
-ENTRY(_stext)
- ! Initialize Status Register
- mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF
- ldc r0, sr
- ! Initialize global interrupt mask
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov #0, r0
- ldc r0, r6_bank
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov r4, r12 ! Store device tree blob pointer in r12
-#endif
-
- /*
- * Prefetch if possible to reduce cache miss penalty.
- *
- * We do this early on for SH-4A as a micro-optimization,
- * as later on we will have speculative execution enabled
- * and this will become less of an issue.
- */
- PREFI(5f, r0)
- PREFI(6f, r0)
-
- !
- mov.l 2f, r0
- mov r0, r15 ! Set initial r15 (stack pointer)
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov.l 7f, r0
- ldc r0, r7_bank ! ... and initial thread_info
-#endif
-
-#ifdef CONFIG_PMB
-/*
- * Reconfigure the initial PMB mappings setup by the hardware.
- *
- * When we boot in 32-bit MMU mode there are 2 PMB entries already
- * setup for us.
- *
- * Entry VPN PPN V SZ C UB WT
- * ---------------------------------------------------------------
- * 0 0x80000000 0x00000000 1 512MB 1 0 1
- * 1 0xA0000000 0x00000000 1 512MB 0 0 0
- *
- * But we reprogram them here because we want complete control over
- * our address space and the initial mappings may not map PAGE_OFFSET
- * to __MEMORY_START (or even map all of our RAM).
- *
- * Once we've setup cached and uncached mappings we clear the rest of the
- * PMB entries. This clearing also deals with the fact that PMB entries
- * can persist across reboots. The PMB could have been left in any state
- * when the reboot occurred, so to be safe we clear all entries and start
- * with with a clean slate.
- *
- * The uncached mapping is constructed using the smallest possible
- * mapping with a single unbufferable page. Only the kernel text needs to
- * be covered via the uncached mapping so that certain functions can be
- * run uncached.
- *
- * Drivers and the like that have previously abused the 1:1 identity
- * mapping are unsupported in 32-bit mode and must specify their caching
- * preference when page tables are constructed.
- *
- * This frees up the P2 space for more nefarious purposes.
- *
- * Register utilization is as follows:
- *
- * r0 = PMB_DATA data field
- * r1 = PMB_DATA address field
- * r2 = PMB_ADDR data field
- * r3 = PMB_ADDR address field
- * r4 = PMB_E_SHIFT
- * r5 = remaining amount of RAM to map
- * r6 = PMB mapping size we're trying to use
- * r7 = cached_to_uncached
- * r8 = scratch register
- * r9 = scratch register
- * r10 = number of PMB entries we've setup
- * r11 = scratch register
- */
-
- mov.l .LMMUCR, r1 /* Flush the TLB */
- mov.l @r1, r0
- or #MMUCR_TI, r0
- mov.l r0, @r1
-
- mov.l .LMEMORY_SIZE, r5
-
- mov #PMB_E_SHIFT, r0
- mov #0x1, r4
- shld r0, r4
-
- mov.l .LFIRST_DATA_ENTRY, r0
- mov.l .LPMB_DATA, r1
- mov.l .LFIRST_ADDR_ENTRY, r2
- mov.l .LPMB_ADDR, r3
-
- /*
- * First we need to walk the PMB and figure out if there are any
- * existing mappings that match the initial mappings VPN/PPN.
- * If these have already been established by the bootloader, we
- * don't bother setting up new entries here, and let the late PMB
- * initialization take care of things instead.
- *
- * Note that we may need to coalesce and merge entries in order
- * to reclaim more available PMB slots, which is much more than
- * we want to do at this early stage.
- */
- mov #0, r10
- mov #NR_PMB_ENTRIES, r9
-
- mov r1, r7 /* temporary PMB_DATA iter */
-
-.Lvalidate_existing_mappings:
-
- mov.l .LPMB_DATA_MASK, r11
- mov.l @r7, r8
- and r11, r8
- cmp/eq r0, r8 /* Check for valid __MEMORY_START mappings */
- bt .Lpmb_done
-
- add #1, r10 /* Increment the loop counter */
- cmp/eq r9, r10
- bf/s .Lvalidate_existing_mappings
- add r4, r7 /* Increment to the next PMB_DATA entry */
-
- /*
- * If we've fallen through, continue with setting up the initial
- * mappings.
- */
-
- mov r5, r7 /* cached_to_uncached */
- mov #0, r10
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Uncached mapping
- */
- mov #(PMB_SZ_16M >> 2), r9
- shll2 r9
-
- mov #(PMB_UB >> 8), r8
- shll8 r8
-
- or r0, r8
- or r9, r8
- mov.l r8, @r1
- mov r2, r8
- add r7, r8
- mov.l r8, @r3
-
- add r4, r1
- add r4, r3
- add #1, r10
-#endif
-
-/*
- * Iterate over all of the available sizes from largest to
- * smallest for constructing the cached mapping.
- */
-#define __PMB_ITER_BY_SIZE(size) \
-.L##size: \
- mov #(size >> 4), r6; \
- shll16 r6; \
- shll8 r6; \
- \
- cmp/hi r5, r6; \
- bt 9999f; \
- \
- mov #(PMB_SZ_##size##M >> 2), r9; \
- shll2 r9; \
- \
- /* \
- * Cached mapping \
- */ \
- mov #PMB_C, r8; \
- or r0, r8; \
- or r9, r8; \
- mov.l r8, @r1; \
- mov.l r2, @r3; \
- \
- /* Increment to the next PMB_DATA entry */ \
- add r4, r1; \
- /* Increment to the next PMB_ADDR entry */ \
- add r4, r3; \
- /* Increment number of PMB entries */ \
- add #1, r10; \
- \
- sub r6, r5; \
- add r6, r0; \
- add r6, r2; \
- \
- bra .L##size; \
-9999:
-
- __PMB_ITER_BY_SIZE(512)
- __PMB_ITER_BY_SIZE(128)
- __PMB_ITER_BY_SIZE(64)
- __PMB_ITER_BY_SIZE(16)
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Now that we can access it, update cached_to_uncached and
- * uncached_size.
- */
- mov.l .Lcached_to_uncached, r0
- mov.l r7, @r0
-
- mov.l .Luncached_size, r0
- mov #1, r7
- shll16 r7
- shll8 r7
- mov.l r7, @r0
-#endif
-
- /*
- * Clear the remaining PMB entries.
- *
- * r3 = entry to begin clearing from
- * r10 = number of entries we've setup so far
- */
- mov #0, r1
- mov #NR_PMB_ENTRIES, r0
-
-.Lagain:
- mov.l r1, @r3 /* Clear PMB_ADDR entry */
- add #1, r10 /* Increment the loop counter */
- cmp/eq r0, r10
- bf/s .Lagain
- add r4, r3 /* Increment to the next PMB_ADDR entry */
-
- mov.l 6f, r0
- icbi @r0
-
-.Lpmb_done:
-#endif /* CONFIG_PMB */
-
-#ifndef CONFIG_SH_NO_BSS_INIT
- /*
- * Don't clear BSS if running on slow platforms such as an RTL simulation,
- * remote memory via SHdebug link, etc. For these the memory can be guaranteed
- * to be all zero on boot anyway.
- */
- ! Clear BSS area
-#ifdef CONFIG_SMP
- mov.l 3f, r0
- cmp/eq #0, r0 ! skip clear if set to zero
- bt 10f
-#endif
-
- mov.l 3f, r1
- add #4, r1
- mov.l 4f, r2
- mov #0, r0
-9: cmp/hs r2, r1
- bf/s 9b ! while (r1 < r2)
- mov.l r0,@-r2
-
-10:
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov.l 8f, r0 ! Make flat device tree available early.
- jsr @r0
- mov r12, r4
-#endif
-
- ! Additional CPU initialization
- mov.l 6f, r0
- jsr @r0
- nop
-
- SYNCO() ! Wait for pending instructions..
-
- ! Start kernel
- mov.l 5f, r0
- jmp @r0
- nop
-
- .balign 4
-#if defined(CONFIG_CPU_SH2)
-1: .long 0x000000F0 ! IMASK=0xF
-#else
-1: .long 0x500080F0 ! MD=1, RB=0, BL=1, FD=1, IMASK=0xF
-#endif
-ENTRY(stack_start)
-2: .long init_thread_union+THREAD_SIZE
-3: .long __bss_start
-4: .long _end
-5: .long start_kernel
-6: .long cpu_init
-7: .long init_thread_union
-#if defined(CONFIG_OF_FLATTREE)
-8: .long sh_fdt_init
-#endif
-
-#ifdef CONFIG_PMB
-.LPMB_ADDR: .long PMB_ADDR
-.LPMB_DATA: .long PMB_DATA
-.LPMB_DATA_MASK: .long PMB_PFN_MASK | PMB_V
-.LFIRST_ADDR_ENTRY: .long PAGE_OFFSET | PMB_V
-.LFIRST_DATA_ENTRY: .long __MEMORY_START | PMB_V
-.LMMUCR: .long MMUCR
-.LMEMORY_SIZE: .long __MEMORY_SIZE
-#ifdef CONFIG_UNCACHED_MAPPING
-.Lcached_to_uncached: .long cached_to_uncached
-.Luncached_size: .long uncached_size
-#endif
-#endif
diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
deleted file mode 100644
index f10d64311127ba..00000000000000
--- a/arch/sh/kernel/hw_breakpoint.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/hw_breakpoint.c
- *
- * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/perf_event.h>
-#include <linux/sched/signal.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/percpu.h>
-#include <linux/kallsyms.h>
-#include <linux/notifier.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <asm/hw_breakpoint.h>
-#include <asm/mmu_context.h>
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-
-/*
- * Stores the breakpoints currently in use on each breakpoint address
- * register for each cpus
- */
-static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
-
-/*
- * A dummy placeholder for early accesses until the CPUs get a chance to
- * register their UBCs later in the boot process.
- */
-static struct sh_ubc ubc_dummy = { .num_events = 0 };
-
-static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
-
-/*
- * Install a perf counter breakpoint.
- *
- * We seek a free UBC channel and use it for this breakpoint.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-int arch_install_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (!*slot) {
- *slot = bp;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return -EBUSY;
-
- clk_enable(sh_ubc->clk);
- sh_ubc->enable(info, i);
-
- return 0;
-}
-
-/*
- * Uninstall the breakpoint contained in the given counter.
- *
- * First we search the debug address register it uses and then we disable
- * it.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-void arch_uninstall_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (*slot == bp) {
- *slot = NULL;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return;
-
- sh_ubc->disable(info, i);
- clk_disable(sh_ubc->clk);
-}
-
-static int get_hbp_len(u16 hbp_len)
-{
- unsigned int len_in_bytes = 0;
-
- switch (hbp_len) {
- case SH_BREAKPOINT_LEN_1:
- len_in_bytes = 1;
- break;
- case SH_BREAKPOINT_LEN_2:
- len_in_bytes = 2;
- break;
- case SH_BREAKPOINT_LEN_4:
- len_in_bytes = 4;
- break;
- case SH_BREAKPOINT_LEN_8:
- len_in_bytes = 8;
- break;
- }
- return len_in_bytes;
-}
-
-/*
- * Check for virtual address in kernel space.
- */
-int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
-{
- unsigned int len;
- unsigned long va;
-
- va = hw->address;
- len = get_hbp_len(hw->len);
-
- return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
-}
-
-int arch_bp_generic_fields(int sh_len, int sh_type,
- int *gen_len, int *gen_type)
-{
- /* Len */
- switch (sh_len) {
- case SH_BREAKPOINT_LEN_1:
- *gen_len = HW_BREAKPOINT_LEN_1;
- break;
- case SH_BREAKPOINT_LEN_2:
- *gen_len = HW_BREAKPOINT_LEN_2;
- break;
- case SH_BREAKPOINT_LEN_4:
- *gen_len = HW_BREAKPOINT_LEN_4;
- break;
- case SH_BREAKPOINT_LEN_8:
- *gen_len = HW_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (sh_type) {
- case SH_BREAKPOINT_READ:
- *gen_type = HW_BREAKPOINT_R;
- break;
- case SH_BREAKPOINT_WRITE:
- *gen_type = HW_BREAKPOINT_W;
- break;
- case SH_BREAKPOINT_RW:
- *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int arch_build_bp_info(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- hw->address = attr->bp_addr;
-
- /* Len */
- switch (attr->bp_len) {
- case HW_BREAKPOINT_LEN_1:
- hw->len = SH_BREAKPOINT_LEN_1;
- break;
- case HW_BREAKPOINT_LEN_2:
- hw->len = SH_BREAKPOINT_LEN_2;
- break;
- case HW_BREAKPOINT_LEN_4:
- hw->len = SH_BREAKPOINT_LEN_4;
- break;
- case HW_BREAKPOINT_LEN_8:
- hw->len = SH_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (attr->bp_type) {
- case HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_READ;
- break;
- case HW_BREAKPOINT_W:
- hw->type = SH_BREAKPOINT_WRITE;
- break;
- case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_RW;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Validate the arch-specific HW Breakpoint register settings
- */
-int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- unsigned int align;
- int ret;
-
- ret = arch_build_bp_info(bp, attr, hw);
- if (ret)
- return ret;
-
- ret = -EINVAL;
-
- switch (hw->len) {
- case SH_BREAKPOINT_LEN_1:
- align = 0;
- break;
- case SH_BREAKPOINT_LEN_2:
- align = 1;
- break;
- case SH_BREAKPOINT_LEN_4:
- align = 3;
- break;
- case SH_BREAKPOINT_LEN_8:
- align = 7;
- break;
- default:
- return ret;
- }
-
- /*
- * Check that the low-order bits of the address are appropriate
- * for the alignment implied by len.
- */
- if (hw->address & align)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Release the user breakpoints used by ptrace
- */
-void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
-{
- int i;
- struct thread_struct *t = &tsk->thread;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- unregister_hw_breakpoint(t->ptrace_bps[i]);
- t->ptrace_bps[i] = NULL;
- }
-}
-
-static int __kprobes hw_breakpoint_handler(struct die_args *args)
-{
- int cpu, i, rc = NOTIFY_STOP;
- struct perf_event *bp;
- unsigned int cmf, resume_mask;
-
- /*
- * Do an early return if none of the channels triggered.
- */
- cmf = sh_ubc->triggered_mask();
- if (unlikely(!cmf))
- return NOTIFY_DONE;
-
- /*
- * By default, resume all of the active channels.
- */
- resume_mask = sh_ubc->active_mask();
-
- /*
- * Disable breakpoints during exception handling.
- */
- sh_ubc->disable_all();
-
- cpu = get_cpu();
- for (i = 0; i < sh_ubc->num_events; i++) {
- unsigned long event_mask = (1 << i);
-
- if (likely(!(cmf & event_mask)))
- continue;
-
- /*
- * The counter may be concurrently released but that can only
- * occur from a call_rcu() path. We can then safely fetch
- * the breakpoint, use its callback, touch its counter
- * while we are in an rcu_read_lock() path.
- */
- rcu_read_lock();
-
- bp = per_cpu(bp_per_reg[i], cpu);
- if (bp)
- rc = NOTIFY_DONE;
-
- /*
- * Reset the condition match flag to denote completion of
- * exception handling.
- */
- sh_ubc->clear_triggered_mask(event_mask);
-
- /*
- * bp can be NULL due to concurrent perf counter
- * removing.
- */
- if (!bp) {
- rcu_read_unlock();
- break;
- }
-
- /*
- * Don't restore the channel if the breakpoint is from
- * ptrace, as it always operates in one-shot mode.
- */
- if (bp->overflow_handler == ptrace_triggered)
- resume_mask &= ~(1 << i);
-
- perf_bp_event(bp, args->regs);
-
- /* Deliver the signal to userspace */
- if (!arch_check_bp_in_kernelspace(&bp->hw.info)) {
- force_sig_fault(SIGTRAP, TRAP_HWBKPT,
- (void __user *)NULL);
- }
-
- rcu_read_unlock();
- }
-
- if (cmf == 0)
- rc = NOTIFY_DONE;
-
- sh_ubc->enable_all(resume_mask);
-
- put_cpu();
-
- return rc;
-}
-
-BUILD_TRAP_HANDLER(breakpoint)
-{
- unsigned long ex = lookup_exception_vector();
- TRAP_HANDLER_DECL;
-
- notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
-}
-
-/*
- * Handle debug exception notifications.
- */
-int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (val != DIE_BREAKPOINT)
- return NOTIFY_DONE;
-
- /*
- * If the breakpoint hasn't been triggered by the UBC, it's
- * probably from a debugger, so don't do anything more here.
- *
- * This also permits the UBC interface clock to remain off for
- * non-UBC breakpoints, as we don't need to check the triggered
- * or active channel masks.
- */
- if (args->trapnr != sh_ubc->trap_nr)
- return NOTIFY_DONE;
-
- return hw_breakpoint_handler(data);
-}
-
-void hw_breakpoint_pmu_read(struct perf_event *bp)
-{
- /* TODO */
-}
-
-int register_sh_ubc(struct sh_ubc *ubc)
-{
- /* Bail if it's already assigned */
- if (sh_ubc != &ubc_dummy)
- return -EBUSY;
- sh_ubc = ubc;
-
- pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
-
- WARN_ON(ubc->num_events > HBP_NUM);
-
- return 0;
-}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
deleted file mode 100644
index f59814983bd59f..00000000000000
--- a/arch/sh/kernel/idle.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * The idle loop for all SuperH platforms.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/preempt.h>
-#include <linux/thread_info.h>
-#include <linux/irqflags.h>
-#include <linux/smp.h>
-#include <linux/atomic.h>
-#include <asm/smp.h>
-#include <asm/bl_bit.h>
-
-static void (*sh_idle)(void);
-
-void default_idle(void)
-{
- set_bl_bit();
- raw_local_irq_enable();
- /* Isn't this racy ? */
- cpu_sleep();
- clear_bl_bit();
-}
-
-void arch_cpu_idle_dead(void)
-{
- play_dead();
-}
-
-void arch_cpu_idle(void)
-{
- sh_idle();
-}
-
-void __init select_idle_routine(void)
-{
- /*
- * If a platform has set its own idle routine, leave it alone.
- */
- if (!sh_idle)
- sh_idle = default_idle;
-}
-
-void stop_this_cpu(void *unused)
-{
- local_irq_disable();
- set_cpu_online(smp_processor_id(), false);
-
- for (;;)
- cpu_sleep();
-}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
deleted file mode 100644
index da22f3b32d305e..00000000000000
--- a/arch/sh/kernel/io.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/io.c - Machine independent I/O functions.
- *
- * Copyright (C) 2000 - 2009 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/*
- * Copy data from IO memory space to "real" memory space.
- */
-void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
-{
- /*
- * Would it be worthwhile doing byte and long transfers first
- * to try and get aligned?
- */
-#ifdef CONFIG_CPU_SH4
- if ((count >= 0x20) &&
- (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l @%7+, %2 \n\t"
- "movca.l r0, @%0 \n\t"
- "mov.l @%7+, %3 \n\t"
- "mov.l @%7+, %4 \n\t"
- "mov.l @%7+, %5 \n\t"
- "mov.l @%7+, %6 \n\t"
- "mov.l @%7+, r7 \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > count \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (to), "=&r" (count),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
- : "7"(from), "0" (to), "1" (count)
- : "r0", "r7", "t", "memory");
- }
-#endif
-
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for (; count > 3; count -= 4) {
- *(u32 *)to = *(volatile u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(u8 *)to = *(volatile u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_fromio);
-
-/*
- * Copy data from "real" memory space to IO memory space.
- */
-void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
-{
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for ( ; count > 3; count -= 4) {
- *(volatile u32 *)to = *(u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(volatile u8 *)to = *(u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_toio);
-
-/*
- * "memset" on IO memory space.
- * This needs to be optimized.
- */
-void memset_io(volatile void __iomem *dst, int c, unsigned long count)
-{
- while (count) {
- count--;
- writeb(c, dst);
- dst++;
- }
-}
-EXPORT_SYMBOL(memset_io);
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
deleted file mode 100644
index e803b14ef12eac..00000000000000
--- a/arch/sh/kernel/io_trapped.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Trapped io support
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Intercept io operations by trapping.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bitops.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-#define TRAPPED_PAGES_MAX 16
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-LIST_HEAD(trapped_io);
-EXPORT_SYMBOL_GPL(trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
-LIST_HEAD(trapped_mem);
-EXPORT_SYMBOL_GPL(trapped_mem);
-#endif
-static DEFINE_SPINLOCK(trapped_lock);
-
-static int trapped_io_disable __read_mostly;
-
-static int __init trapped_io_setup(char *__unused)
-{
- trapped_io_disable = 1;
- return 1;
-}
-__setup("noiotrap", trapped_io_setup);
-
-int register_trapped_io(struct trapped_io *tiop)
-{
- struct resource *res;
- unsigned long len = 0, flags = 0;
- struct page *pages[TRAPPED_PAGES_MAX];
- int k, n;
-
- if (unlikely(trapped_io_disable))
- return 0;
-
- /* structure must be page aligned */
- if ((unsigned long)tiop & (PAGE_SIZE - 1))
- goto bad;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len += roundup(resource_size(res), PAGE_SIZE);
- flags |= res->flags;
- }
-
- /* support IORESOURCE_IO _or_ MEM, not both */
- if (hweight_long(flags) != 1)
- goto bad;
-
- n = len >> PAGE_SHIFT;
-
- if (n >= TRAPPED_PAGES_MAX)
- goto bad;
-
- for (k = 0; k < n; k++)
- pages[k] = virt_to_page(tiop);
-
- tiop->virt_base = vmap(pages, n, VM_MAP, PAGE_NONE);
- if (!tiop->virt_base)
- goto bad;
-
- len = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- pr_info("trapped io 0x%08lx overrides %s 0x%08lx\n",
- (unsigned long)(tiop->virt_base + len),
- res->flags & IORESOURCE_IO ? "io" : "mmio",
- (unsigned long)res->start);
- len += roundup(resource_size(res), PAGE_SIZE);
- }
-
- tiop->magic = IO_TRAPPED_MAGIC;
- INIT_LIST_HEAD(&tiop->list);
- spin_lock_irq(&trapped_lock);
-#ifdef CONFIG_HAS_IOPORT_MAP
- if (flags & IORESOURCE_IO)
- list_add(&tiop->list, &trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
- if (flags & IORESOURCE_MEM)
- list_add(&tiop->list, &trapped_mem);
-#endif
- spin_unlock_irq(&trapped_lock);
-
- return 0;
- bad:
- pr_warn("unable to install trapped io filter\n");
- return -1;
-}
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size)
-{
- unsigned long voffs;
- struct trapped_io *tiop;
- struct resource *res;
- int k, len;
- unsigned long flags;
-
- spin_lock_irqsave(&trapped_lock, flags);
- list_for_each_entry(tiop, list, list) {
- voffs = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- if (res->start == offset) {
- spin_unlock_irqrestore(&trapped_lock, flags);
- return tiop->virt_base + voffs;
- }
-
- len = resource_size(res);
- voffs += roundup(len, PAGE_SIZE);
- }
- }
- spin_unlock_irqrestore(&trapped_lock, flags);
- return NULL;
-}
-
-static struct trapped_io *lookup_tiop(unsigned long address)
-{
- pgd_t *pgd_k;
- p4d_t *p4d_k;
- pud_t *pud_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
- pte_t entry;
-
- pgd_k = swapper_pg_dir + pgd_index(address);
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- entry = *pte_k;
-
- return pfn_to_kaddr(pte_pfn(entry));
-}
-
-static unsigned long lookup_address(struct trapped_io *tiop,
- unsigned long address)
-{
- struct resource *res;
- unsigned long vaddr = (unsigned long)tiop->virt_base;
- unsigned long len;
- int k;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len = roundup(resource_size(res), PAGE_SIZE);
- if (address < (vaddr + len))
- return res->start + (address - vaddr);
- vaddr += len;
- }
- return 0;
-}
-
-static unsigned long long copy_word(unsigned long src_addr, int src_len,
- unsigned long dst_addr, int dst_len)
-{
- unsigned long long tmp = 0;
-
- switch (src_len) {
- case 1:
- tmp = __raw_readb(src_addr);
- break;
- case 2:
- tmp = __raw_readw(src_addr);
- break;
- case 4:
- tmp = __raw_readl(src_addr);
- break;
- case 8:
- tmp = __raw_readq(src_addr);
- break;
- }
-
- switch (dst_len) {
- case 1:
- __raw_writeb(tmp, dst_addr);
- break;
- case 2:
- __raw_writew(tmp, dst_addr);
- break;
- case 4:
- __raw_writel(tmp, dst_addr);
- break;
- case 8:
- __raw_writeq(tmp, dst_addr);
- break;
- }
-
- return tmp;
-}
-
-static unsigned long from_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long src_addr = (unsigned long)src;
- unsigned long long tmp;
-
- pr_debug("trapped io read 0x%08lx (%ld)\n", src_addr, cnt);
- tiop = lookup_tiop(src_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- src_addr = lookup_address(tiop, src_addr);
- if (!src_addr)
- return cnt;
-
- tmp = copy_word(src_addr,
- max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)),
- (unsigned long)dst, cnt);
-
- pr_debug("trapped io read 0x%08lx -> 0x%08llx\n", src_addr, tmp);
- return 0;
-}
-
-static unsigned long to_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long dst_addr = (unsigned long)dst;
- unsigned long long tmp;
-
- pr_debug("trapped io write 0x%08lx (%ld)\n", dst_addr, cnt);
- tiop = lookup_tiop(dst_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- dst_addr = lookup_address(tiop, dst_addr);
- if (!dst_addr)
- return cnt;
-
- tmp = copy_word((unsigned long)src, cnt,
- dst_addr, max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)));
-
- pr_debug("trapped io write 0x%08lx -> 0x%08llx\n", dst_addr, tmp);
- return 0;
-}
-
-static struct mem_access trapped_io_access = {
- from_device,
- to_device,
-};
-
-int handle_trapped_io(struct pt_regs *regs, unsigned long address)
-{
- insn_size_t instruction;
- int tmp;
-
- if (trapped_io_disable)
- return 0;
- if (!lookup_tiop(address))
- return 0;
-
- WARN_ON(user_mode(regs));
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- return 0;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &trapped_io_access, 1, address);
- return tmp == 0;
-}
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
deleted file mode 100644
index 0a0dff4e66dea4..00000000000000
--- a/arch/sh/kernel/iomap.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/iomap.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-unsigned int ioread8(const void __iomem *addr)
-{
- return readb(addr);
-}
-EXPORT_SYMBOL(ioread8);
-
-unsigned int ioread16(const void __iomem *addr)
-{
- return readw(addr);
-}
-EXPORT_SYMBOL(ioread16);
-
-unsigned int ioread16be(const void __iomem *addr)
-{
- return be16_to_cpu(__raw_readw(addr));
-}
-EXPORT_SYMBOL(ioread16be);
-
-unsigned int ioread32(const void __iomem *addr)
-{
- return readl(addr);
-}
-EXPORT_SYMBOL(ioread32);
-
-unsigned int ioread32be(const void __iomem *addr)
-{
- return be32_to_cpu(__raw_readl(addr));
-}
-EXPORT_SYMBOL(ioread32be);
-
-void iowrite8(u8 val, void __iomem *addr)
-{
- writeb(val, addr);
-}
-EXPORT_SYMBOL(iowrite8);
-
-void iowrite16(u16 val, void __iomem *addr)
-{
- writew(val, addr);
-}
-EXPORT_SYMBOL(iowrite16);
-
-void iowrite16be(u16 val, void __iomem *addr)
-{
- __raw_writew(cpu_to_be16(val), addr);
-}
-EXPORT_SYMBOL(iowrite16be);
-
-void iowrite32(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-EXPORT_SYMBOL(iowrite32);
-
-void iowrite32be(u32 val, void __iomem *addr)
-{
- __raw_writel(cpu_to_be32(val), addr);
-}
-EXPORT_SYMBOL(iowrite32be);
-
-/*
- * These are the "repeat MMIO read/write" functions.
- * Note the "__raw" accesses, since we don't want to
- * convert to CPU byte order. We write in "IO byte
- * order" (we also don't have IO barriers).
- */
-static inline void mmio_insb(const void __iomem *addr, u8 *dst, int count)
-{
- while (--count >= 0) {
- u8 data = __raw_readb(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insw(const void __iomem *addr, u16 *dst, int count)
-{
- while (--count >= 0) {
- u16 data = __raw_readw(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insl(const void __iomem *addr, u32 *dst, int count)
-{
- while (--count >= 0) {
- u32 data = __raw_readl(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
-{
- while (--count >= 0) {
- __raw_writeb(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
-{
- while (--count >= 0) {
- __raw_writew(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
-{
- while (--count >= 0) {
- __raw_writel(*src, addr);
- src++;
- }
-}
-
-void ioread8_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insb(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread8_rep);
-
-void ioread16_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insw(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread16_rep);
-
-void ioread32_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insl(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread32_rep);
-
-void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsb(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite8_rep);
-
-void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsw(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite16_rep);
-
-void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsl(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite32_rep);
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
deleted file mode 100644
index f39446a658bdb8..00000000000000
--- a/arch/sh/kernel/ioport.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/ioport.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-
-unsigned long sh_io_port_base __read_mostly = -1;
-EXPORT_SYMBOL(sh_io_port_base);
-
-void __iomem *__ioport_map(unsigned long addr, unsigned int size)
-{
- if (sh_mv.mv_ioport_map)
- return sh_mv.mv_ioport_map(addr, size);
-
- return (void __iomem *)(addr + sh_io_port_base);
-}
-EXPORT_SYMBOL(__ioport_map);
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- void __iomem *ret;
-
- ret = __ioport_map_trapped(port, nr);
- if (ret)
- return ret;
-
- return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
- if (sh_mv.mv_ioport_unmap)
- sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
deleted file mode 100644
index 4e6835de54cf8e..00000000000000
--- a/arch/sh/kernel/irq.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/irq.c
- *
- * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
- *
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/ftrace.h>
-#include <linux/delay.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/machvec.h>
-#include <linux/uaccess.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/softirq_stack.h>
-
-atomic_t irq_err_count;
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
- atomic_inc(&irq_err_count);
- printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
-#if defined(CONFIG_PROC_FS)
-/*
- * /proc/interrupts printing for arch specific interrupts
- */
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
- int j;
-
- seq_printf(p, "%*s: ", prec, "NMI");
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", per_cpu(irq_stat.__nmi_count, j));
- seq_printf(p, " Non-maskable interrupts\n");
-
- seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * per-CPU IRQ handling contexts (thread information and stack)
- */
-union irq_ctx {
- struct thread_info tinfo;
- u32 stack[THREAD_SIZE/sizeof(u32)];
-};
-
-static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
-static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-
-static inline void handle_one_irq(unsigned int irq)
-{
- union irq_ctx *curctx, *irqctx;
-
- curctx = (union irq_ctx *)current_thread_info();
- irqctx = hardirq_ctx[smp_processor_id()];
-
- /*
- * this is where we switch to the IRQ stack. However, if we are
- * already using the IRQ stack (because we interrupted a hardirq
- * handler) we can't do that and just have to keep using the
- * current stack (which is the irq stack already after all)
- */
- if (curctx != irqctx) {
- u32 *isp;
-
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
- irqctx->tinfo.task = curctx->tinfo.task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /*
- * Copy the softirq bits in preempt_count so that the
- * softirq checks work in the hardirq context.
- */
- irqctx->tinfo.preempt_count =
- (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
- (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
- __asm__ __volatile__ (
- "mov %0, r4 \n"
- "mov r15, r8 \n"
- "jsr @%1 \n"
- /* switch to the irq stack */
- " mov %2, r15 \n"
- /* restore the stack (ring zero) */
- "mov r8, r15 \n"
- : /* no outputs */
- : "r" (irq), "r" (generic_handle_irq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "t", "pr"
- );
- } else
- generic_handle_irq(irq);
-}
-
-/*
- * allocate per-cpu stacks for hardirq and for softirq processing
- */
-void irq_ctx_init(int cpu)
-{
- union irq_ctx *irqctx;
-
- if (hardirq_ctx[cpu])
- return;
-
- irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- hardirq_ctx[cpu] = irqctx;
-
- irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = 0;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- softirq_ctx[cpu] = irqctx;
-
- printk("CPU %u irqstacks, hard=%p soft=%p\n",
- cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
-}
-
-void irq_ctx_exit(int cpu)
-{
- hardirq_ctx[cpu] = NULL;
-}
-
-#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
-void do_softirq_own_stack(void)
-{
- struct thread_info *curctx;
- union irq_ctx *irqctx;
- u32 *isp;
-
- curctx = current_thread_info();
- irqctx = softirq_ctx[smp_processor_id()];
- irqctx->tinfo.task = curctx->task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /* build the stack frame on the softirq stack */
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
-
- __asm__ __volatile__ (
- "mov r15, r9 \n"
- "jsr @%0 \n"
- /* switch to the softirq stack */
- " mov %1, r15 \n"
- /* restore the thread stack */
- "mov r9, r15 \n"
- : /* no outputs */
- : "r" (__do_softirq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
- );
-}
-#endif
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
- generic_handle_irq(irq);
-}
-#endif
-
-asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- irq_enter();
-
- irq = irq_demux(irq_lookup(irq));
-
- if (irq != NO_IRQ_IGNORE) {
- handle_one_irq(irq);
- irq_finish(irq);
- }
-
- irq_exit();
-
- set_irq_regs(old_regs);
-
- return IRQ_HANDLED;
-}
-
-void __init init_IRQ(void)
-{
- plat_irq_setup();
-
- /* Perform the machine specific initialisation */
- if (sh_mv.mv_init_irq)
- sh_mv.mv_init_irq();
-
- intc_finalize();
-
- irq_ctx_init(smp_processor_id());
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The CPU has been marked offline. Migrate IRQs off this CPU. If
- * the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- */
-void migrate_irqs(void)
-{
- unsigned int irq, cpu = smp_processor_id();
-
- for_each_active_irq(irq) {
- struct irq_data *data = irq_get_irq_data(irq);
-
- if (irq_data_get_node(data) == cpu) {
- const struct cpumask *mask = irq_data_get_affinity_mask(data);
- unsigned int newcpu = cpumask_any_and(mask,
- cpu_online_mask);
- if (newcpu >= nr_cpu_ids) {
- pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
- irq, cpu);
-
- irq_set_affinity(irq, cpu_all_mask);
- } else {
- irq_set_affinity(irq, mask);
- }
- }
- }
-}
-#endif
diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c
deleted file mode 100644
index e09cdc4ada68c8..00000000000000
--- a/arch/sh/kernel/irq_32.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SHcompact irqflags support
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- */
-#include <linux/irqflags.h>
-#include <linux/module.h>
-
-void notrace arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __dummy0, __dummy1;
-
- if (flags == ARCH_IRQ_DISABLED) {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or #0xf0, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&z" (__dummy0)
- : /* no inputs */
- : "memory"
- );
- } else {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
- "stc r6_bank, %1\n\t"
- "or %1, %0\n\t"
-#endif
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~ARCH_IRQ_DISABLED)
- : "memory"
- );
- }
-}
-EXPORT_SYMBOL(arch_local_irq_restore);
-
-unsigned long notrace arch_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- : "=&z" (flags)
- : /* no inputs */
- : "memory"
- );
-
- return flags;
-}
-EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/arch/sh/kernel/kdebugfs.c b/arch/sh/kernel/kdebugfs.c
deleted file mode 100644
index 8b505e1556a5f8..00000000000000
--- a/arch/sh/kernel/kdebugfs.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-
-struct dentry *arch_debugfs_dir;
-EXPORT_SYMBOL(arch_debugfs_dir);
-
-static int __init arch_kdebugfs_init(void)
-{
- arch_debugfs_dir = debugfs_create_dir("sh", NULL);
- return 0;
-}
-arch_initcall(arch_kdebugfs_init);
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
deleted file mode 100644
index e4147efa9ec6da..00000000000000
--- a/arch/sh/kernel/kgdb.c
+++ /dev/null
@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH KGDB support
- *
- * Copyright (C) 2008 - 2012 Paul Mundt
- *
- * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
- */
-#include <linux/kgdb.h>
-#include <linux/kdebug.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/* Macros for single step instruction identification */
-#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
-#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
-#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
- (((op) & 0x7f ) << 1))
-#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
-#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
-#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
-#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
-#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
-#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
-#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
-#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
-#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
-#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_RTS(op) ((op) == 0xb)
-#define OPCODE_RTE(op) ((op) == 0x2b)
-
-#define SR_T_BIT_MASK 0x1
-#define STEP_OPCODE 0xc33d
-
-/* Calculate the new address for after a step */
-static short *get_step_address(struct pt_regs *linux_regs)
-{
- insn_size_t op = __raw_readw(linux_regs->pc);
- long addr;
-
- /* BT */
- if (OPCODE_BT(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BTS */
- else if (OPCODE_BTS(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BF */
- else if (OPCODE_BF(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BFS */
- else if (OPCODE_BFS(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BRA */
- else if (OPCODE_BRA(op))
- addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
-
- /* BRAF */
- else if (OPCODE_BRAF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BRAF_REG(op)];
-
- /* BSR */
- else if (OPCODE_BSR(op))
- addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
-
- /* BSRF */
- else if (OPCODE_BSRF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BSRF_REG(op)];
-
- /* JMP */
- else if (OPCODE_JMP(op))
- addr = linux_regs->regs[OPCODE_JMP_REG(op)];
-
- /* JSR */
- else if (OPCODE_JSR(op))
- addr = linux_regs->regs[OPCODE_JSR_REG(op)];
-
- /* RTS */
- else if (OPCODE_RTS(op))
- addr = linux_regs->pr;
-
- /* RTE */
- else if (OPCODE_RTE(op))
- addr = linux_regs->regs[15];
-
- /* Other */
- else
- addr = linux_regs->pc + instruction_size(op);
-
- flush_icache_range(addr, addr + instruction_size(op));
- return (short *)addr;
-}
-
-/*
- * Replace the instruction immediately after the current instruction
- * (i.e. next in the expected flow of control) with a trap instruction,
- * so that returning will cause only a single instruction to be executed.
- * Note that this model is slightly broken for instructions with delay
- * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
- * instruction in the delay slot will be executed.
- */
-
-static unsigned long stepped_address;
-static insn_size_t stepped_opcode;
-
-static void do_single_step(struct pt_regs *linux_regs)
-{
- /* Determine where the target instruction will send us to */
- unsigned short *addr = get_step_address(linux_regs);
-
- stepped_address = (int)addr;
-
- /* Replace it */
- stepped_opcode = __raw_readw((long)addr);
- *addr = STEP_OPCODE;
-
- /* Flush and return */
- flush_icache_range((long)addr, (long)addr +
- instruction_size(stepped_opcode));
-}
-
-/* Undo a single step */
-static void undo_single_step(struct pt_regs *linux_regs)
-{
- /* If we have stepped, put back the old instruction */
- /* Use stepped_address in case we stopped elsewhere */
- if (stepped_opcode != 0) {
- __raw_writew(stepped_opcode, stepped_address);
- flush_icache_range(stepped_address, stepped_address + 2);
- }
-
- stepped_opcode = 0;
-}
-
-struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
- { "r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
- { "r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
- { "r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
- { "r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
- { "r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
- { "r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
- { "r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
- { "r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
- { "r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
- { "r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
- { "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
- { "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
- { "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
- { "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
- { "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
- { "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
- { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc) },
- { "pr", GDB_SIZEOF_REG, offsetof(struct pt_regs, pr) },
- { "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, sr) },
- { "gbr", GDB_SIZEOF_REG, offsetof(struct pt_regs, gbr) },
- { "mach", GDB_SIZEOF_REG, offsetof(struct pt_regs, mach) },
- { "macl", GDB_SIZEOF_REG, offsetof(struct pt_regs, macl) },
- { "vbr", GDB_SIZEOF_REG, -1 },
-};
-
-int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno < 0 || regno >= DBG_MAX_REG_NUM)
- return -EINVAL;
-
- if (dbg_reg_def[regno].offset != -1)
- memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
- dbg_reg_def[regno].size);
-
- return 0;
-}
-
-char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno >= DBG_MAX_REG_NUM || regno < 0)
- return NULL;
-
- if (dbg_reg_def[regno].size != -1)
- memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
- dbg_reg_def[regno].size);
-
- switch (regno) {
- case GDB_VBR:
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (mem));
- break;
- }
-
- return dbg_reg_def[regno].name;
-}
-
-void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
-{
- struct pt_regs *thread_regs = task_pt_regs(p);
- int reg;
-
- /* Initialize to zero */
- for (reg = 0; reg < DBG_MAX_REG_NUM; reg++)
- gdb_regs[reg] = 0;
-
- /*
- * Copy out GP regs 8 to 14.
- *
- * switch_to() relies on SR.RB toggling, so regs 0->7 are banked
- * and need privileged instructions to get to. The r15 value we
- * fetch from the thread info directly.
- */
- for (reg = GDB_R8; reg < GDB_R15; reg++)
- gdb_regs[reg] = thread_regs->regs[reg];
-
- gdb_regs[GDB_R15] = p->thread.sp;
- gdb_regs[GDB_PC] = p->thread.pc;
-
- /*
- * Additional registers we have context for
- */
- gdb_regs[GDB_PR] = thread_regs->pr;
- gdb_regs[GDB_GBR] = thread_regs->gbr;
-}
-
-int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
- char *remcomInBuffer, char *remcomOutBuffer,
- struct pt_regs *linux_regs)
-{
- unsigned long addr;
- char *ptr;
-
- /* Undo any stepping we may have done */
- undo_single_step(linux_regs);
-
- switch (remcomInBuffer[0]) {
- case 'c':
- case 's':
- /* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
- if (kgdb_hex2long(&ptr, &addr))
- linux_regs->pc = addr;
- fallthrough;
- case 'D':
- case 'k':
- atomic_set(&kgdb_cpu_doing_single_step, -1);
-
- if (remcomInBuffer[0] == 's') {
- do_single_step(linux_regs);
- kgdb_single_step = 1;
-
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
- }
-
- return 0;
- }
-
- /* this means that we do not want to exit from the handler: */
- return -1;
-}
-
-unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
-{
- if (exception == 60)
- return instruction_pointer(regs) - 2;
- return instruction_pointer(regs);
-}
-
-void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
-{
- regs->pc = ip;
-}
-
-/*
- * The primary entry points for the kgdb debug trap table entries.
- */
-BUILD_TRAP_HANDLER(singlestep)
-{
- unsigned long flags;
- TRAP_HANDLER_DECL;
-
- local_irq_save(flags);
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- kgdb_handle_exception(0, SIGTRAP, 0, regs);
- local_irq_restore(flags);
-}
-
-static int __kgdb_notify(struct die_args *args, unsigned long cmd)
-{
- int ret;
-
- switch (cmd) {
- case DIE_BREAKPOINT:
- /*
- * This means a user thread is single stepping
- * a system call which should be ignored
- */
- if (test_thread_flag(TIF_SINGLESTEP))
- return NOTIFY_DONE;
-
- ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
- args->err, args->regs);
- if (ret)
- return NOTIFY_DONE;
-
- break;
- }
-
- return NOTIFY_STOP;
-}
-
-static int
-kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
-{
- unsigned long flags;
- int ret;
-
- local_irq_save(flags);
- ret = __kgdb_notify(ptr, cmd);
- local_irq_restore(flags);
-
- return ret;
-}
-
-static struct notifier_block kgdb_notifier = {
- .notifier_call = kgdb_notify,
-
- /*
- * Lowest-prio notifier priority, we want to be notified last:
- */
- .priority = -INT_MAX,
-};
-
-int kgdb_arch_init(void)
-{
- return register_die_notifier(&kgdb_notifier);
-}
-
-void kgdb_arch_exit(void)
-{
- unregister_die_notifier(&kgdb_notifier);
-}
-
-const struct kgdb_arch arch_kgdb_ops = {
- /* Breakpoint instruction: trapa #0x3c */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- .gdb_bpt_instr = { 0x3c, 0xc3 },
-#else
- .gdb_bpt_instr = { 0xc3, 0x3c },
-#endif
-};
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
deleted file mode 100644
index aed1ea8e2c2f06..00000000000000
--- a/arch/sh/kernel/kprobes.c
+++ /dev/null
@@ -1,452 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Kernel probes (kprobes) for SuperH
- *
- * Copyright (C) 2007 Chris Smith <chris.smith@st.com>
- * Copyright (C) 2006 Lineo Solutions, Inc.
- */
-#include <linux/kprobes.h>
-#include <linux/extable.h>
-#include <linux/ptrace.h>
-#include <linux/preempt.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-static DEFINE_PER_CPU(struct kprobe, saved_current_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode2);
-
-#define OPCODE_JMP(x) (((x) & 0xF0FF) == 0x402b)
-#define OPCODE_JSR(x) (((x) & 0xF0FF) == 0x400b)
-#define OPCODE_BRA(x) (((x) & 0xF000) == 0xa000)
-#define OPCODE_BRAF(x) (((x) & 0xF0FF) == 0x0023)
-#define OPCODE_BSR(x) (((x) & 0xF000) == 0xb000)
-#define OPCODE_BSRF(x) (((x) & 0xF0FF) == 0x0003)
-
-#define OPCODE_BF_S(x) (((x) & 0xFF00) == 0x8f00)
-#define OPCODE_BT_S(x) (((x) & 0xFF00) == 0x8d00)
-
-#define OPCODE_BF(x) (((x) & 0xFF00) == 0x8b00)
-#define OPCODE_BT(x) (((x) & 0xFF00) == 0x8900)
-
-#define OPCODE_RTS(x) (((x) & 0x000F) == 0x000b)
-#define OPCODE_RTE(x) (((x) & 0xFFFF) == 0x002b)
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
- kprobe_opcode_t opcode = *(kprobe_opcode_t *) (p->addr);
-
- if (OPCODE_RTE(opcode))
- return -EFAULT; /* Bad breakpoint */
-
- p->opcode = opcode;
-
- return 0;
-}
-
-void __kprobes arch_copy_kprobe(struct kprobe *p)
-{
- memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- p->opcode = *p->addr;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
- *p->addr = BREAKPOINT_INSTRUCTION;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
- *p->addr = p->opcode;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
- if (*p->addr == BREAKPOINT_INSTRUCTION)
- return 1;
-
- return 0;
-}
-
-/**
- * If an illegal slot instruction exception occurs for an address
- * containing a kprobe, remove the probe.
- *
- * Returns 0 if the exception was handled successfully, 1 otherwise.
- */
-int __kprobes kprobe_handle_illslot(unsigned long pc)
-{
- struct kprobe *p = get_kprobe((kprobe_opcode_t *) pc + 1);
-
- if (p != NULL) {
- printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
- (unsigned int)pc + 2);
- unregister_kprobe(p);
- return 0;
- }
-
- return 1;
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
- struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
-
- if (saved->addr) {
- arch_disarm_kprobe(p);
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
-
- saved = this_cpu_ptr(&saved_next_opcode2);
- if (saved->addr) {
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
- }
- }
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- kcb->prev_kprobe.kp = kprobe_running();
- kcb->prev_kprobe.status = kcb->kprobe_status;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
- kcb->kprobe_status = kcb->prev_kprobe.status;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, p);
-}
-
-/*
- * Singlestep is implemented by disabling the current kprobe and setting one
- * on the next instruction, following branches. Two probes are set if the
- * branch is conditional.
- */
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
- __this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
-
- if (p != NULL) {
- struct kprobe *op1, *op2;
-
- arch_disarm_kprobe(p);
-
- op1 = this_cpu_ptr(&saved_next_opcode);
- op2 = this_cpu_ptr(&saved_next_opcode2);
-
- if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr = (kprobe_opcode_t *) regs->regs[reg_nr];
- } else if (OPCODE_BRA(p->opcode) || OPCODE_BSR(p->opcode)) {
- unsigned long disp = (p->opcode & 0x0FFF);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
-
- } else if (OPCODE_BRAF(p->opcode) || OPCODE_BSRF(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 +
- regs->regs[reg_nr]);
-
- } else if (OPCODE_RTS(p->opcode)) {
- op1->addr = (kprobe_opcode_t *) regs->pr;
-
- } else if (OPCODE_BF(p->opcode) || OPCODE_BT(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 1;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else if (OPCODE_BF_S(p->opcode) || OPCODE_BT_S(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 2;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else {
- op1->addr = p->addr + 1;
- }
-
- op1->opcode = *(op1->addr);
- arch_arm_kprobe(op1);
- }
-}
-
-/* Called with kretprobe_lock held */
-void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
- struct pt_regs *regs)
-{
- ri->ret_addr = (kprobe_opcode_t *) regs->pr;
- ri->fp = NULL;
-
- /* Replace the return addr with trampoline addr */
- regs->pr = (unsigned long)__kretprobe_trampoline;
-}
-
-static int __kprobes kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *p;
- int ret = 0;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb;
-
- /*
- * We don't want to be preempted for the entire
- * duration of kprobe processing
- */
- preempt_disable();
- kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (regs->pc);
-
- /* Check we're not actually recursing */
- if (kprobe_running()) {
- p = get_kprobe(addr);
- if (p) {
- if (kcb->kprobe_status == KPROBE_HIT_SS &&
- *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
- goto no_kprobe;
- }
- /* We have reentered the kprobe_handler(), since
- * another probe was hit while within the handler.
- * We here save the original kprobes variables and
- * just single step on the instruction of the new probe
- * without calling any user handlers.
- */
- save_previous_kprobe(kcb);
- set_current_kprobe(p, regs, kcb);
- kprobes_inc_nmissed_count(p);
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_REENTER;
- return 1;
- }
- goto no_kprobe;
- }
-
- p = get_kprobe(addr);
- if (!p) {
- /* Not one of ours: let kernel handle it */
- if (*(kprobe_opcode_t *)addr != BREAKPOINT_INSTRUCTION) {
- /*
- * The breakpoint instruction was removed right
- * after we hit it. Another cpu has removed
- * either a probepoint or a debugger breakpoint
- * at this address. In either case, no further
- * handling of this interrupt is appropriate.
- */
- ret = 1;
- }
-
- goto no_kprobe;
- }
-
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
- if (p->pre_handler && p->pre_handler(p, regs)) {
- /* handler has already set things up, so skip ss setup */
- reset_current_kprobe();
- preempt_enable_no_resched();
- return 1;
- }
-
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_HIT_SS;
- return 1;
-
-no_kprobe:
- preempt_enable_no_resched();
- return ret;
-}
-
-/*
- * For function-return probes, init_kprobes() establishes a probepoint
- * here. When a retprobed function returns, this probe is hit and
- * trampoline_probe_handler() runs, calling the kretprobe's handler.
- */
-static void __used kretprobe_trampoline_holder(void)
-{
- asm volatile (".globl __kretprobe_trampoline\n"
- "__kretprobe_trampoline:\n\t"
- "nop\n");
-}
-
-/*
- * Called when we hit the probe point at __kretprobe_trampoline
- */
-int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
-{
- regs->pc = __kretprobe_trampoline_handler(regs, NULL);
-
- return 1;
-}
-
-static int __kprobes post_kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kprobe_opcode_t *addr = NULL;
- struct kprobe *p = NULL;
-
- if (!cur)
- return 0;
-
- if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- cur->post_handler(cur, regs, 0);
- }
-
- p = this_cpu_ptr(&saved_next_opcode);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
-
- addr = __this_cpu_read(saved_current_opcode.addr);
- __this_cpu_write(saved_current_opcode.addr, NULL);
-
- p = get_kprobe(addr);
- arch_arm_kprobe(p);
-
- p = this_cpu_ptr(&saved_next_opcode2);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
- }
- }
-
- /* Restore back the original saved kprobes variables and continue. */
- if (kcb->kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe(kcb);
- goto out;
- }
-
- reset_current_kprobe();
-
-out:
- preempt_enable_no_resched();
-
- return 1;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- const struct exception_table_entry *entry;
-
- switch (kcb->kprobe_status) {
- case KPROBE_HIT_SS:
- case KPROBE_REENTER:
- /*
- * We are here because the instruction being single
- * stepped caused a page fault. We reset the current
- * kprobe, point the pc back to the probe address
- * and allow the page fault handler to continue as a
- * normal page fault.
- */
- regs->pc = (unsigned long)cur->addr;
- if (kcb->kprobe_status == KPROBE_REENTER)
- restore_previous_kprobe(kcb);
- else
- reset_current_kprobe();
- preempt_enable_no_resched();
- break;
- case KPROBE_HIT_ACTIVE:
- case KPROBE_HIT_SSDONE:
- /*
- * In case the user-specified fault handler returned
- * zero, try to fix up.
- */
- if ((entry = search_exception_tables(regs->pc)) != NULL) {
- regs->pc = entry->fixup;
- return 1;
- }
-
- /*
- * fixup_exception() could not handle it,
- * Let do_page_fault() fix it.
- */
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/*
- * Wrapper routine to for handling exceptions.
- */
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct kprobe *p = NULL;
- struct die_args *args = (struct die_args *)data;
- int ret = NOTIFY_DONE;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (args->regs->pc);
- if (val == DIE_TRAP &&
- args->trapnr == (BREAKPOINT_INSTRUCTION & 0xff)) {
- if (!kprobe_running()) {
- if (kprobe_handler(args->regs)) {
- ret = NOTIFY_STOP;
- } else {
- /* Not a kprobe trap */
- ret = NOTIFY_DONE;
- }
- } else {
- p = get_kprobe(addr);
- if ((kcb->kprobe_status == KPROBE_HIT_SS) ||
- (kcb->kprobe_status == KPROBE_REENTER)) {
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- } else {
- if (kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- }
- }
- }
-
- return ret;
-}
-
-static struct kprobe trampoline_p = {
- .addr = (kprobe_opcode_t *)&__kretprobe_trampoline,
- .pre_handler = trampoline_probe_handler
-};
-
-int __init arch_init_kprobes(void)
-{
- return register_kprobe(&trampoline_p);
-}
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
deleted file mode 100644
index 223c14f44af7e4..00000000000000
--- a/arch/sh/kernel/machine_kexec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- * LANDISK/sh4 supported by kogiidena
- */
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/numa.h>
-#include <linux/ftrace.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/sh_bios.h>
-#include <asm/reboot.h>
-
-typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
- unsigned long reboot_code_buffer,
- unsigned long start_address);
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-extern void *vbr_base;
-
-void native_machine_crash_shutdown(struct pt_regs *regs)
-{
- /* Nothing to do for UP, but definitely broken for SMP.. */
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
- return 0;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-}
-
-static void kexec_info(struct kimage *image)
-{
- int i;
- printk("kexec information\n");
- for (i = 0; i < image->nr_segments; i++) {
- printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
- i,
- (unsigned int)image->segment[i].mem,
- (unsigned int)image->segment[i].mem +
- image->segment[i].memsz,
- (unsigned int)image->segment[i].memsz);
- }
- printk(" start : 0x%08x\n\n", (unsigned int)image->start);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-void machine_kexec(struct kimage *image)
-{
- unsigned long page_list;
- unsigned long reboot_code_buffer;
- relocate_new_kernel_t rnk;
- unsigned long entry;
- unsigned long *ptr;
- int save_ftrace_enabled;
-
- /*
- * Nicked from the mips version of machine_kexec():
- * The generic kexec code builds a page list with physical
- * addresses. Use phys_to_virt() to convert them to virtual.
- */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (entry & IND_INDIRECTION) ?
- phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = (unsigned long) phys_to_virt(*ptr);
- }
-
-#ifdef CONFIG_KEXEC_JUMP
- if (image->preserve_context)
- save_processor_state();
-#endif
-
- save_ftrace_enabled = __ftrace_enabled_save();
-
- /* Interrupts aren't acceptable while we reboot */
- local_irq_disable();
-
- page_list = image->head;
-
- /* we need both effective and real address here */
- reboot_code_buffer =
- (unsigned long)page_address(image->control_code_page);
-
- /* copy our kernel relocation code to the control code page */
- memcpy((void *)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
-
- kexec_info(image);
- flush_cache_all();
-
- sh_bios_vbr_reload();
-
- /* now call it */
- rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer,
- (unsigned long)phys_to_virt(image->start));
-
-#ifdef CONFIG_KEXEC_JUMP
- asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-
- if (image->preserve_context)
- restore_processor_state();
-
- /* Convert page list back to physical addresses, what a mess. */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (*ptr & IND_INDIRECTION) ?
- phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = virt_to_phys(*ptr);
- }
-#endif
-
- __ftrace_enabled_restore(save_ftrace_enabled);
-}
-
-void arch_crash_save_vmcoreinfo(void)
-{
-#ifdef CONFIG_NUMA
- VMCOREINFO_SYMBOL(node_data);
- VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
-#ifdef CONFIG_X2TLB
- VMCOREINFO_CONFIG(X2TLB);
-#endif
-}
-
-void __init reserve_crashkernel(void)
-{
- unsigned long long crash_size, crash_base;
- int ret;
-
- ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
- &crash_size, &crash_base);
- if (ret == 0 && crash_size > 0) {
- crashk_res.start = crash_base;
- crashk_res.end = crash_base + crash_size - 1;
- }
-
- if (crashk_res.end == crashk_res.start)
- goto disable;
-
- crash_size = PAGE_ALIGN(resource_size(&crashk_res));
- if (!crashk_res.start) {
- unsigned long max = memblock_end_of_DRAM() - memory_limit;
- crashk_res.start = memblock_phys_alloc_range(crash_size,
- PAGE_SIZE, 0, max);
- if (!crashk_res.start) {
- pr_err("crashkernel allocation failed\n");
- goto disable;
- }
- } else {
- ret = memblock_reserve(crashk_res.start, crash_size);
- if (unlikely(ret < 0)) {
- pr_err("crashkernel reservation failed - "
- "memory is in use\n");
- goto disable;
- }
- }
-
- crashk_res.end = crashk_res.start + crash_size - 1;
-
- /*
- * Crash kernel trumps memory limit
- */
- if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
- memory_limit = 0;
- pr_info("Disabled memory limit for crashkernel\n");
- }
-
- pr_info("Reserving %ldMB of memory at 0x%08lx "
- "for crashkernel (System RAM: %ldMB)\n",
- (unsigned long)(crash_size >> 20),
- (unsigned long)(crashk_res.start),
- (unsigned long)(memblock_phys_mem_size() >> 20));
-
- return;
-
-disable:
- crashk_res.start = crashk_res.end = 0;
-}
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
deleted file mode 100644
index 57efaf5b82ae07..00000000000000
--- a/arch/sh/kernel/machvec.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/machvec.c
- *
- * The SuperH machine vector setup handlers, yanked from setup.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <asm/machvec.h>
-#include <asm/sections.h>
-#include <asm/addrspace.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-
-#define MV_NAME_SIZE 32
-
-#define for_each_mv(mv) \
- for ((mv) = (struct sh_machine_vector *)__machvec_start; \
- (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \
- (mv)++)
-
-static struct sh_machine_vector * __init get_mv_byname(const char *name)
-{
- struct sh_machine_vector *mv;
-
- for_each_mv(mv)
- if (strcasecmp(name, mv->mv_name) == 0)
- return mv;
-
- return NULL;
-}
-
-static unsigned int __initdata machvec_selected;
-
-static int __init early_parse_mv(char *from)
-{
- char mv_name[MV_NAME_SIZE] = "";
- char *mv_end;
- char *mv_comma;
- int mv_len;
- struct sh_machine_vector *mvp;
-
- mv_end = strchr(from, ' ');
- if (mv_end == NULL)
- mv_end = from + strlen(from);
-
- mv_comma = strchr(from, ',');
- mv_len = mv_end - from;
- if (mv_len > (MV_NAME_SIZE-1))
- mv_len = MV_NAME_SIZE-1;
- memcpy(mv_name, from, mv_len);
- mv_name[mv_len] = '\0';
- from = mv_end;
-
- machvec_selected = 1;
-
- /* Boot with the generic vector */
- if (strcmp(mv_name, "generic") == 0)
- return 0;
-
- mvp = get_mv_byname(mv_name);
- if (unlikely(!mvp)) {
- pr_info("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
- for_each_mv(mvp)
- pr_cont("'%s', ", mvp->mv_name);
- pr_cont("\n\n");
- panic("Failed to select machvec '%s' -- halting.\n",
- mv_name);
- } else
- sh_mv = *mvp;
-
- return 0;
-}
-early_param("sh_mv", early_parse_mv);
-
-void __init sh_mv_setup(void)
-{
- /*
- * Only overload the machvec if one hasn't been selected on
- * the command line with sh_mv=
- */
- if (!machvec_selected) {
- unsigned long machvec_size;
-
- machvec_size = ((unsigned long)__machvec_end -
- (unsigned long)__machvec_start);
-
- /*
- * Sanity check for machvec section alignment. Ensure
- * __initmv hasn't been misused.
- */
- if (machvec_size % sizeof(struct sh_machine_vector))
- panic("machvec misaligned, invalid __initmv use?");
-
- /*
- * If the machvec hasn't been preselected, use the first
- * vector (usually the only one) from .machvec.init.
- */
- if (machvec_size >= sizeof(struct sh_machine_vector))
- sh_mv = *(struct sh_machine_vector *)__machvec_start;
- }
-
- pr_notice("Booting machvec: %s\n", get_system_type());
-
- /*
- * Manually walk the vec, fill in anything that the board hasn't yet
- * by hand, wrapping to the generic implementation.
- */
-#define mv_set(elem) do { \
- if (!sh_mv.mv_##elem) \
- sh_mv.mv_##elem = generic_##elem; \
-} while (0)
-
- mv_set(irq_demux);
- mv_set(mode_pins);
- mv_set(mem_init);
-}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
deleted file mode 100644
index b9cee98a754e51..00000000000000
--- a/arch/sh/kernel/module.c
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Kernel module help for SH.
-
- SHcompact version by Kaz Kojima and Paul Mundt.
-
- SHmedia bits:
-
- Copyright 2004 SuperH (UK) Ltd
- Author: Richard Curnow
-
- Based on the sh version, and on code from the sh64-specific parts of
- modutils, originally written by Richard Curnow and Ben Gaster.
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/bug.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/unaligned.h>
-#include <asm/dwarf.h>
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- Elf32_Addr relocation;
- uint32_t *location;
- uint32_t value;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rel[i].r_info);
- relocation = sym->st_value + rel[i].r_addend;
-
- switch (ELF32_R_TYPE(rel[i].r_info)) {
- case R_SH_NONE:
- break;
- case R_SH_DIR32:
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_REL32:
- relocation = (relocation - (Elf32_Addr) location);
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_IMM_LOW16:
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16:
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- case R_SH_IMM_LOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, ELF32_R_TYPE(rel[i].r_info));
- return -ENOEXEC;
- }
- }
- return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
- const Elf_Shdr *sechdrs,
- struct module *me)
-{
- int ret = 0;
-
- ret |= module_dwarf_finalize(hdr, sechdrs, me);
-
- return ret;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
- module_dwarf_cleanup(mod);
-}
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
deleted file mode 100644
index 11777867c6f5fc..00000000000000
--- a/arch/sh/kernel/nmi_debug.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Atmel Corporation
- */
-#include <linux/delay.h>
-#include <linux/kdebug.h>
-#include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/hardirq.h>
-
-enum nmi_action {
- NMI_SHOW_STATE = 1 << 0,
- NMI_SHOW_REGS = 1 << 1,
- NMI_DIE = 1 << 2,
- NMI_DEBOUNCE = 1 << 3,
-};
-
-static unsigned long nmi_actions;
-
-static int nmi_debug_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (likely(val != DIE_NMI))
- return NOTIFY_DONE;
-
- if (nmi_actions & NMI_SHOW_STATE)
- show_state();
- if (nmi_actions & NMI_SHOW_REGS)
- show_regs(args->regs);
- if (nmi_actions & NMI_DEBOUNCE)
- mdelay(10);
- if (nmi_actions & NMI_DIE)
- return NOTIFY_BAD;
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block nmi_debug_nb = {
- .notifier_call = nmi_debug_notify,
-};
-
-static int __init nmi_debug_setup(char *str)
-{
- char *p, *sep;
-
- register_die_notifier(&nmi_debug_nb);
-
- if (*str != '=')
- return 0;
-
- for (p = str + 1; *p; p = sep + 1) {
- sep = strchr(p, ',');
- if (sep)
- *sep = 0;
- if (strcmp(p, "state") == 0)
- nmi_actions |= NMI_SHOW_STATE;
- else if (strcmp(p, "regs") == 0)
- nmi_actions |= NMI_SHOW_REGS;
- else if (strcmp(p, "debounce") == 0)
- nmi_actions |= NMI_DEBOUNCE;
- else if (strcmp(p, "die") == 0)
- nmi_actions |= NMI_DIE;
- else
- printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
- p);
- if (!sep)
- break;
- }
-
- return 0;
-}
-__setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
deleted file mode 100644
index c9d3aa18732d1d..00000000000000
--- a/arch/sh/kernel/perf_callchain.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event callchain support - SuperH architecture code
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/perf_event.h>
-#include <linux/percpu.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-
-static void callchain_address(void *data, unsigned long addr, int reliable)
-{
- struct perf_callchain_entry_ctx *entry = data;
-
- if (reliable)
- perf_callchain_store(entry, addr);
-}
-
-static const struct stacktrace_ops callchain_ops = {
- .address = callchain_address,
-};
-
-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
-{
- perf_callchain_store(entry, regs->pc);
-
- unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
-}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
deleted file mode 100644
index 1d2507f2243723..00000000000000
--- a/arch/sh/kernel/perf_event.c
+++ /dev/null
@@ -1,363 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event support framework for SuperH hardware counters.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * Heavily based on the x86 and PowerPC implementations.
- *
- * x86:
- * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2009 Jaswinder Singh Rajput
- * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- *
- * ppc:
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <linux/export.h>
-#include <asm/processor.h>
-
-struct cpu_hw_events {
- struct perf_event *events[MAX_HWEVENTS];
- unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-};
-
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-static struct sh_pmu *sh_pmu __read_mostly;
-
-/* Number of perf_events counting hardware events */
-static atomic_t num_events;
-/* Used to avoid races in calling reserve/release_pmc_hardware */
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-/*
- * Stub these out for now, do something more profound later.
- */
-int reserve_pmc_hardware(void)
-{
- return 0;
-}
-
-void release_pmc_hardware(void)
-{
-}
-
-static inline int sh_pmu_initialized(void)
-{
- return !!sh_pmu;
-}
-
-/*
- * Release the PMU if this is the last perf_event.
- */
-static void hw_perf_event_destroy(struct perf_event *event)
-{
- if (!atomic_add_unless(&num_events, -1, 1)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_dec_return(&num_events) == 0)
- release_pmc_hardware();
- mutex_unlock(&pmc_reserve_mutex);
- }
-}
-
-static int hw_perf_cache_event(int config, int *evp)
-{
- unsigned long type, op, result;
- int ev;
-
- if (!sh_pmu->cache_events)
- return -EINVAL;
-
- /* unpack config */
- type = config & 0xff;
- op = (config >> 8) & 0xff;
- result = (config >> 16) & 0xff;
-
- if (type >= PERF_COUNT_HW_CACHE_MAX ||
- op >= PERF_COUNT_HW_CACHE_OP_MAX ||
- result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return -EINVAL;
-
- ev = (*sh_pmu->cache_events)[type][op][result];
- if (ev == 0)
- return -EOPNOTSUPP;
- if (ev == -1)
- return -EINVAL;
- *evp = ev;
- return 0;
-}
-
-static int __hw_perf_event_init(struct perf_event *event)
-{
- struct perf_event_attr *attr = &event->attr;
- struct hw_perf_event *hwc = &event->hw;
- int config = -1;
- int err;
-
- if (!sh_pmu_initialized())
- return -ENODEV;
-
- /*
- * See if we need to reserve the counter.
- *
- * If no events are currently in use, then we have to take a
- * mutex to ensure that we don't race with another task doing
- * reserve_pmc_hardware or release_pmc_hardware.
- */
- err = 0;
- if (!atomic_inc_not_zero(&num_events)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&num_events) == 0 &&
- reserve_pmc_hardware())
- err = -EBUSY;
- else
- atomic_inc(&num_events);
- mutex_unlock(&pmc_reserve_mutex);
- }
-
- if (err)
- return err;
-
- event->destroy = hw_perf_event_destroy;
-
- switch (attr->type) {
- case PERF_TYPE_RAW:
- config = attr->config & sh_pmu->raw_event_mask;
- break;
- case PERF_TYPE_HW_CACHE:
- err = hw_perf_cache_event(attr->config, &config);
- if (err)
- return err;
- break;
- case PERF_TYPE_HARDWARE:
- if (attr->config >= sh_pmu->max_events)
- return -EINVAL;
-
- config = sh_pmu->event_map(attr->config);
- break;
- }
-
- if (config == -1)
- return -EINVAL;
-
- hwc->config |= config;
-
- return 0;
-}
-
-static void sh_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
-{
- u64 prev_raw_count, new_raw_count;
- s64 delta;
- int shift = 0;
-
- /*
- * Depending on the counter configuration, they may or may not
- * be chained, in which case the previous counter value can be
- * updated underneath us if the lower-half overflows.
- *
- * Our tactic to handle this is to first atomically read and
- * exchange a new raw count - then add that new-prev delta
- * count to the generic counter atomically.
- *
- * As there is no interrupt associated with the overflow events,
- * this is the simplest approach for maintaining consistency.
- */
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- new_raw_count = sh_pmu->read(idx);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- /*
- * Now we have the new raw value and have updated the prev
- * timestamp already. We can now calculate the elapsed delta
- * (counter-)time and add that to the generic counter.
- *
- * Careful, not all hw sign-extends above the physical width
- * of the count.
- */
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
-
- local64_add(delta, &event->count);
-}
-
-static void sh_pmu_stop(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (!(event->hw.state & PERF_HES_STOPPED)) {
- sh_pmu->disable(hwc, idx);
- cpuc->events[idx] = NULL;
- event->hw.state |= PERF_HES_STOPPED;
- }
-
- if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
- sh_perf_event_update(event, &event->hw, idx);
- event->hw.state |= PERF_HES_UPTODATE;
- }
-}
-
-static void sh_pmu_start(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (WARN_ON_ONCE(idx == -1))
- return;
-
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
- cpuc->events[idx] = event;
- event->hw.state = 0;
- sh_pmu->enable(hwc, idx);
-}
-
-static void sh_pmu_del(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-
- sh_pmu_stop(event, PERF_EF_UPDATE);
- __clear_bit(event->hw.idx, cpuc->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static int sh_pmu_add(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
- int ret = -EAGAIN;
-
- perf_pmu_disable(event->pmu);
-
- if (__test_and_set_bit(idx, cpuc->used_mask)) {
- idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
- if (idx == sh_pmu->num_events)
- goto out;
-
- __set_bit(idx, cpuc->used_mask);
- hwc->idx = idx;
- }
-
- sh_pmu->disable(hwc, idx);
-
- event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
- if (flags & PERF_EF_START)
- sh_pmu_start(event, PERF_EF_RELOAD);
-
- perf_event_update_userpage(event);
- ret = 0;
-out:
- perf_pmu_enable(event->pmu);
- return ret;
-}
-
-static void sh_pmu_read(struct perf_event *event)
-{
- sh_perf_event_update(event, &event->hw, event->hw.idx);
-}
-
-static int sh_pmu_event_init(struct perf_event *event)
-{
- int err;
-
- /* does not support taken branch sampling */
- if (has_branch_stack(event))
- return -EOPNOTSUPP;
-
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HW_CACHE:
- case PERF_TYPE_HARDWARE:
- err = __hw_perf_event_init(event);
- break;
-
- default:
- return -ENOENT;
- }
-
- if (unlikely(err)) {
- if (event->destroy)
- event->destroy(event);
- }
-
- return err;
-}
-
-static void sh_pmu_enable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->enable_all();
-}
-
-static void sh_pmu_disable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->disable_all();
-}
-
-static struct pmu pmu = {
- .pmu_enable = sh_pmu_enable,
- .pmu_disable = sh_pmu_disable,
- .event_init = sh_pmu_event_init,
- .add = sh_pmu_add,
- .del = sh_pmu_del,
- .start = sh_pmu_start,
- .stop = sh_pmu_stop,
- .read = sh_pmu_read,
-};
-
-static int sh_pmu_prepare_cpu(unsigned int cpu)
-{
- struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
-
- memset(cpuhw, 0, sizeof(struct cpu_hw_events));
- return 0;
-}
-
-int register_sh_pmu(struct sh_pmu *_pmu)
-{
- if (sh_pmu)
- return -EBUSY;
- sh_pmu = _pmu;
-
- pr_info("Performance Events: %s support registered\n", _pmu->name);
-
- /*
- * All of the on-chip counters are "limited", in that they have
- * no interrupts, and are therefore unable to do sampling without
- * further work and timer assistance.
- */
- pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-
- WARN_ON(_pmu->num_events > MAX_HWEVENTS);
-
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
- cpuhp_setup_state(CPUHP_PERF_SUPERH, "PERF_SUPERH", sh_pmu_prepare_cpu,
- NULL);
- return 0;
-}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
deleted file mode 100644
index 169832fcf21b2f..00000000000000
--- a/arch/sh/kernel/process.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task_stack.h>
-#include <linux/export.h>
-#include <linux/stackprotector.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-struct kmem_cache *task_xstate_cachep = NULL;
-unsigned int xstate_size;
-
-#ifdef CONFIG_STACKPROTECTOR
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
-/*
- * this gets called so that we can store lazy state into memory and copy the
- * current task into the new thread.
- */
-int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
-{
- unlazy_fpu(src, task_pt_regs(src));
- *dst = *src;
-
- if (src->thread.xstate) {
- dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!dst->thread.xstate)
- return -ENOMEM;
- memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
- }
-
- return 0;
-}
-
-void free_thread_xstate(struct task_struct *tsk)
-{
- if (tsk->thread.xstate) {
- kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
- tsk->thread.xstate = NULL;
- }
-}
-
-void arch_release_task_struct(struct task_struct *tsk)
-{
- free_thread_xstate(tsk);
-}
-
-void arch_task_cache_init(void)
-{
- if (!xstate_size)
- return;
-
- task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
- __alignof__(union thread_xstate),
- SLAB_PANIC, NULL);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-# define HAVE_SOFTFP 1
-#else
-# define HAVE_SOFTFP 0
-#endif
-
-void init_thread_xstate(void)
-{
- if (boot_cpu_data.flags & CPU_HAS_FPU)
- xstate_size = sizeof(struct sh_fpu_hard_struct);
- else if (HAVE_SOFTFP)
- xstate_size = sizeof(struct sh_fpu_soft_struct);
- else
- xstate_size = 0;
-}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
deleted file mode 100644
index 92b6649d492952..00000000000000
--- a/arch/sh/kernel/process_32.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/process.c
- *
- * This file handles the architecture-dependent parts of process handling..
- *
- * Copyright (C) 1995 Linus Torvalds
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- * Copyright (C) 2002 - 2008 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <linux/elfcore.h>
-#include <linux/fs.h>
-#include <linux/ftrace.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/prefetch.h>
-#include <linux/stackprotector.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/fpu.h>
-#include <asm/syscalls.h>
-#include <asm/switch_to.h>
-
-void show_regs(struct pt_regs * regs)
-{
- pr_info("\n");
- show_regs_print_info(KERN_DEFAULT);
-
- pr_info("PC is at %pS\n", (void *)instruction_pointer(regs));
- pr_info("PR is at %pS\n", (void *)regs->pr);
-
- pr_info("PC : %08lx SP : %08lx SR : %08lx ", regs->pc,
- regs->regs[15], regs->sr);
-#ifdef CONFIG_MMU
- pr_cont("TEA : %08x\n", __raw_readl(MMU_TEA));
-#else
- pr_cont("\n");
-#endif
-
- pr_info("R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
- regs->regs[0], regs->regs[1], regs->regs[2], regs->regs[3]);
- pr_info("R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
- regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
- pr_info("R8 : %08lx R9 : %08lx R10 : %08lx R11 : %08lx\n",
- regs->regs[8], regs->regs[9], regs->regs[10], regs->regs[11]);
- pr_info("R12 : %08lx R13 : %08lx R14 : %08lx\n",
- regs->regs[12], regs->regs[13], regs->regs[14]);
- pr_info("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n",
- regs->mach, regs->macl, regs->gbr, regs->pr);
-
- show_trace(NULL, (unsigned long *)regs->regs[15], regs, KERN_DEFAULT);
- show_code(regs);
-}
-
-void start_thread(struct pt_regs *regs, unsigned long new_pc,
- unsigned long new_sp)
-{
- regs->pr = 0;
- regs->sr = SR_FD;
- regs->pc = new_pc;
- regs->regs[15] = new_sp;
-
- free_thread_xstate(current);
-}
-EXPORT_SYMBOL(start_thread);
-
-void flush_thread(void)
-{
- struct task_struct *tsk = current;
-
- flush_ptrace_hw_breakpoint(tsk);
-
-#if defined(CONFIG_SH_FPU)
- /* Forget lazy FPU state */
- clear_fpu(tsk, task_pt_regs(tsk));
- clear_used_math();
-#endif
-}
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
-{
- unsigned long clone_flags = args->flags;
- unsigned long usp = args->stack;
- unsigned long tls = args->tls;
- struct thread_info *ti = task_thread_info(p);
- struct pt_regs *childregs;
-
-#if defined(CONFIG_SH_DSP)
- struct task_struct *tsk = current;
-
- if (is_dsp_enabled(tsk)) {
- /* We can use the __save_dsp or just copy the struct:
- * __save_dsp(p);
- * p->thread.dsp_status.status |= SR_DSP
- */
- p->thread.dsp_status = tsk->thread.dsp_status;
- }
-#endif
-
- memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
-
- childregs = task_pt_regs(p);
- p->thread.sp = (unsigned long) childregs;
- if (unlikely(args->fn)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- p->thread.pc = (unsigned long) ret_from_kernel_thread;
- childregs->regs[4] = (unsigned long) args->fn_arg;
- childregs->regs[5] = (unsigned long) args->fn;
- childregs->sr = SR_MD;
-#if defined(CONFIG_SH_FPU)
- childregs->sr |= SR_FD;
-#endif
- ti->status &= ~TS_USEDFPU;
- p->thread.fpu_counter = 0;
- return 0;
- }
- *childregs = *current_pt_regs();
-
- if (usp)
- childregs->regs[15] = usp;
-
- if (clone_flags & CLONE_SETTLS)
- childregs->gbr = tls;
-
- childregs->regs[0] = 0; /* Set return value for child */
- p->thread.pc = (unsigned long) ret_from_fork;
- return 0;
-}
-
-/*
- * switch_to(x,y) should switch tasks from x to y.
- *
- */
-__notrace_funcgraph struct task_struct *
-__switch_to(struct task_struct *prev, struct task_struct *next)
-{
- struct thread_struct *next_t = &next->thread;
-
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
- __stack_chk_guard = next->stack_canary;
-#endif
-
- unlazy_fpu(prev, task_pt_regs(prev));
-
- /* we're going to use this soon, after a few expensive things */
- if (next->thread.fpu_counter > 5)
- prefetch(next_t->xstate);
-
-#ifdef CONFIG_MMU
- /*
- * Restore the kernel mode register
- * k7 (r7_bank1)
- */
- asm volatile("ldc %0, r7_bank"
- : /* no output */
- : "r" (task_thread_info(next)));
-#endif
-
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- if (next->thread.fpu_counter > 5)
- __fpu_state_restore();
-
- return prev;
-}
-
-unsigned long __get_wchan(struct task_struct *p)
-{
- unsigned long pc;
-
- /*
- * The same comment as on the Alpha applies here, too ...
- */
- pc = thread_saved_pc(p);
-
-#ifdef CONFIG_FRAME_POINTER
- if (in_sched_functions(pc)) {
- unsigned long schedule_frame = (unsigned long)p->thread.sp;
- return ((unsigned long *)schedule_frame)[21];
- }
-#endif
-
- return pc;
-}
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
deleted file mode 100644
index bfc59f2c2602f4..00000000000000
--- a/arch/sh/kernel/ptrace.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/ptrace.h>
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name: the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (!strcmp(roff->name, name))
- return roff->offset;
- return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset: the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (roff->offset == offset)
- return roff->name;
- return NULL;
-}
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
deleted file mode 100644
index 36f50ad81e8329..00000000000000
--- a/arch/sh/kernel/ptrace_32.c
+++ /dev/null
@@ -1,487 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH process tracing
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- *
- * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-#include <linux/io.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/elf.h>
-#include <linux/regset.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/*
- * This routine will get a word off of the process kernel stack.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- return (*((int *)stack));
-}
-
-/*
- * This routine will put a word on the process kernel stack.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
- unsigned long data)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- *(unsigned long *) stack = data;
- return 0;
-}
-
-void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event_attr attr;
-
- /*
- * Disable the breakpoint request here since ptrace has defined a
- * one-shot behaviour for breakpoint exceptions.
- */
- attr = bp->attr;
- attr.disabled = true;
- modify_user_hw_breakpoint(bp, &attr);
-}
-
-static int set_single_step(struct task_struct *tsk, unsigned long addr)
-{
- struct thread_struct *thread = &tsk->thread;
- struct perf_event *bp;
- struct perf_event_attr attr;
-
- bp = thread->ptrace_bps[0];
- if (!bp) {
- ptrace_breakpoint_init(&attr);
-
- attr.bp_addr = addr;
- attr.bp_len = HW_BREAKPOINT_LEN_2;
- attr.bp_type = HW_BREAKPOINT_R;
-
- bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
- NULL, tsk);
- if (IS_ERR(bp))
- return PTR_ERR(bp);
-
- thread->ptrace_bps[0] = bp;
- } else {
- int err;
-
- attr = bp->attr;
- attr.bp_addr = addr;
- /* reenable breakpoint */
- attr.disabled = false;
- err = modify_user_hw_breakpoint(bp, &attr);
- if (unlikely(err))
- return err;
- }
-
- return 0;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
- unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
-
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
-
- set_single_step(child, pc);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
-
-static int genregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_regs *regs = task_pt_regs(target);
-
- return membuf_write(&to, regs, sizeof(struct pt_regs));
-}
-
-static int genregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_regs *regs = task_pt_regs(target);
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- regs->regs,
- 0, 16 * sizeof(unsigned long));
- if (!ret && count > 0)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s->pc,
- offsetof(struct pt_regs, pc),
- sizeof(struct pt_regs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_regs), -1);
-
- return ret;
-}
-
-#ifdef CONFIG_SH_FPU
-static int fpregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- return membuf_write(&to, target->thread.xstate,
- sizeof(struct user_fpu_struct));
-}
-
-static int fpregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- set_stopped_child_used_math(target);
-
- if ((boot_cpu_data.flags & CPU_HAS_FPU))
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->hardfpu, 0, -1);
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->softfpu, 0, -1);
-}
-
-static int fpregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- return tsk_used_math(target) ? regset->n : 0;
-}
-#endif
-
-#ifdef CONFIG_SH_DSP
-static int dspregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
-
- return membuf_write(&to, regs, sizeof(struct pt_dspregs));
-}
-
-static int dspregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs,
- 0, sizeof(struct pt_dspregs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_dspregs), -1);
-
- return ret;
-}
-
-static int dspregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- struct pt_regs *regs = task_pt_regs(target);
-
- return regs->sr & SR_DSP ? regset->n : 0;
-}
-#endif
-
-const struct pt_regs_offset regoffset_table[] = {
- REGS_OFFSET_NAME(0),
- REGS_OFFSET_NAME(1),
- REGS_OFFSET_NAME(2),
- REGS_OFFSET_NAME(3),
- REGS_OFFSET_NAME(4),
- REGS_OFFSET_NAME(5),
- REGS_OFFSET_NAME(6),
- REGS_OFFSET_NAME(7),
- REGS_OFFSET_NAME(8),
- REGS_OFFSET_NAME(9),
- REGS_OFFSET_NAME(10),
- REGS_OFFSET_NAME(11),
- REGS_OFFSET_NAME(12),
- REGS_OFFSET_NAME(13),
- REGS_OFFSET_NAME(14),
- REGS_OFFSET_NAME(15),
- REG_OFFSET_NAME(pc),
- REG_OFFSET_NAME(pr),
- REG_OFFSET_NAME(sr),
- REG_OFFSET_NAME(gbr),
- REG_OFFSET_NAME(mach),
- REG_OFFSET_NAME(macl),
- REG_OFFSET_NAME(tra),
- REG_OFFSET_END,
-};
-
-/*
- * These are our native regset flavours.
- */
-enum sh_regset {
- REGSET_GENERAL,
-#ifdef CONFIG_SH_FPU
- REGSET_FPU,
-#endif
-#ifdef CONFIG_SH_DSP
- REGSET_DSP,
-#endif
-};
-
-static const struct user_regset sh_regsets[] = {
- /*
- * Format is:
- * R0 --> R15
- * PC, PR, SR, GBR, MACH, MACL, TRA
- */
- [REGSET_GENERAL] = {
- .core_note_type = NT_PRSTATUS,
- .n = ELF_NGREG,
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = genregs_get,
- .set = genregs_set,
- },
-
-#ifdef CONFIG_SH_FPU
- [REGSET_FPU] = {
- .core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_fpu_struct) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = fpregs_get,
- .set = fpregs_set,
- .active = fpregs_active,
- },
-#endif
-
-#ifdef CONFIG_SH_DSP
- [REGSET_DSP] = {
- .n = sizeof(struct pt_dspregs) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = dspregs_get,
- .set = dspregs_set,
- .active = dspregs_active,
- },
-#endif
-};
-
-static const struct user_regset_view user_sh_native_view = {
- .name = "sh",
- .e_machine = EM_SH,
- .regsets = sh_regsets,
- .n = ARRAY_SIZE(sh_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
- return &user_sh_native_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- unsigned long __user *datap = (unsigned long __user *)data;
- int ret;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- tmp = get_stack_long(child, addr);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- if (!tsk_used_math(child)) {
- if (addr == offsetof(struct user, fpu.fpscr))
- tmp = FPSCR_INIT;
- else
- tmp = 0;
- } else {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- tmp = ((unsigned long *)child->thread.xstate)
- [index >> 2];
- }
- } else if (addr == offsetof(struct user, u_fpvalid))
- tmp = !!tsk_used_math(child);
- else if (addr == PT_TEXT_ADDR)
- tmp = child->mm->start_code;
- else if (addr == PT_DATA_ADDR)
- tmp = child->mm->start_data;
- else if (addr == PT_TEXT_END_ADDR)
- tmp = child->mm->end_code;
- else if (addr == PT_TEXT_LEN)
- tmp = child->mm->end_code - child->mm->start_code;
- else
- tmp = 0;
- ret = put_user(tmp, datap);
- break;
- }
-
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- ret = put_stack_long(child, addr, data);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- set_stopped_child_used_math(child);
- ((unsigned long *)child->thread.xstate)
- [index >> 2] = data;
- ret = 0;
- } else if (addr == offsetof(struct user, u_fpvalid)) {
- conditional_stopped_child_used_math(data, child);
- ret = 0;
- }
- break;
-
- case PTRACE_GETREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
- case PTRACE_SETREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
-#ifdef CONFIG_SH_FPU
- case PTRACE_GETFPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
- case PTRACE_SETFPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
-#endif
-#ifdef CONFIG_SH_DSP
- case PTRACE_GETDSPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
- case PTRACE_SETDSPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
-#endif
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
-
- return ret;
-}
-
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
-{
- if (test_thread_flag(TIF_SYSCALL_TRACE) &&
- ptrace_report_syscall_entry(regs)) {
- regs->regs[0] = -ENOSYS;
- return -1;
- }
-
- if (secure_computing() == -1)
- return -1;
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_enter(regs, regs->regs[0]);
-
- audit_syscall_entry(regs->regs[3], regs->regs[4], regs->regs[5],
- regs->regs[6], regs->regs[7]);
-
- return 0;
-}
-
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
-{
- int step;
-
- audit_syscall_exit(regs);
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[0]);
-
- step = test_thread_flag(TIF_SINGLESTEP);
- if (step || test_thread_flag(TIF_SYSCALL_TRACE))
- ptrace_report_syscall_exit(regs, step);
-}
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
deleted file mode 100644
index e8eeedc9b1822d..00000000000000
--- a/arch/sh/kernel/reboot.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pm.h>
-#include <linux/kexec.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-#include <asm/watchdog.h>
-#include <asm/addrspace.h>
-#include <asm/reboot.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-static void watchdog_trigger_immediate(void)
-{
- sh_wdt_write_cnt(0xFF);
- sh_wdt_write_csr(0xC2);
-}
-
-static void native_machine_restart(char * __unused)
-{
- local_irq_disable();
-
- /* Destroy all of the TLBs in preparation for reset by MMU */
- __flush_tlb_global();
-
- /* Address error with SR.BL=1 first. */
- trigger_address_error();
-
- /* If that fails or is unsupported, go for the watchdog next. */
- watchdog_trigger_immediate();
-
- /*
- * Give up and sleep.
- */
- while (1)
- cpu_sleep();
-}
-
-static void native_machine_shutdown(void)
-{
- smp_send_stop();
-}
-
-static void native_machine_power_off(void)
-{
- do_kernel_power_off();
-}
-
-static void native_machine_halt(void)
-{
- /* stop other cpus */
- machine_shutdown();
-
- /* stop this cpu */
- stop_this_cpu(NULL);
-}
-
-struct machine_ops machine_ops = {
- .power_off = native_machine_power_off,
- .shutdown = native_machine_shutdown,
- .restart = native_machine_restart,
- .halt = native_machine_halt,
-#ifdef CONFIG_KEXEC
- .crash_shutdown = native_machine_crash_shutdown,
-#endif
-};
-
-void machine_power_off(void)
-{
- machine_ops.power_off();
-}
-
-void machine_shutdown(void)
-{
- machine_ops.shutdown();
-}
-
-void machine_restart(char *cmd)
-{
- machine_ops.restart(cmd);
-}
-
-void machine_halt(void)
-{
- machine_ops.halt();
-}
-
-#ifdef CONFIG_KEXEC
-void machine_crash_shutdown(struct pt_regs *regs)
-{
- machine_ops.crash_shutdown(regs);
-}
-#endif
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
deleted file mode 100644
index d9bf2b727b429e..00000000000000
--- a/arch/sh/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * relocate_kernel.S - put the kernel image in place to boot
- * 2005.9.17 kogiidena@eggplant.ddo.jp
- *
- * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
- *
- * 2009-03-18 Magnus Damm - Added Kexec Jump support
- */
-#include <linux/linkage.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
- .globl relocate_new_kernel
-relocate_new_kernel:
- /* r4 = indirection_page */
- /* r5 = reboot_code_buffer */
- /* r6 = start_address */
-
- mov.l 10f, r0 /* PAGE_SIZE */
- add r5, r0 /* setup new stack at end of control page */
-
- /* save r15->r8 to new stack */
- mov.l r15, @-r0
- mov r0, r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* save other random registers */
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- stc.l sr, @-r15
- sts.l pr, @-r15
- stc.l spc, @-r15
-
- /* switch to bank1 and save r7->r0 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- /* switch to bank0 and save r7->r0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- mov.l r4, @-r15 /* save indirection page again */
-
- bsr swap_pages /* swap pages before jumping to new kernel */
- nop
-
- mova 11f, r0
- mov.l r15, @r0 /* save pointer to stack */
-
- jsr @r6 /* hand over control to new kernel */
- nop
-
- mov.l 11f, r15 /* get pointer to stack */
- mov.l @r15+, r4 /* restore r4 to get indirection page */
-
- bsr swap_pages /* swap pages back to previous state */
- nop
-
- /* make sure bank0 is active and restore r0->r7 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch to bank1 and restore r0->r7 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch back to bank0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
-
- /* restore other random registers */
- ldc.l @r15+, spc
- lds.l @r15+, pr
- ldc.l @r15+, sr
- ldc.l @r15+, ssr
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
-
- /* restore r8->r15 */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, r15
- rts
- nop
-
-swap_pages:
- bra 1f
- mov r4,r0 /* cmd = indirection_page */
-0:
- mov.l @r4+,r0 /* cmd = *ind++ */
-
-1: /* addr = cmd & 0xfffffff0 */
- mov r0,r2
- mov #-16,r1
- and r1,r2
-
- /* if(cmd & IND_DESTINATION) dst = addr */
- tst #1,r0
- bt 2f
- bra 0b
- mov r2,r5
-
-2: /* else if(cmd & IND_INDIRECTION) ind = addr */
- tst #2,r0
- bt 3f
- bra 0b
- mov r2,r4
-
-3: /* else if(cmd & IND_DONE) return */
- tst #4,r0
- bt 4f
- rts
- nop
-
-4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
- tst #8,r0
- bt 0b
-
- mov.l 10f,r3 /* PAGE_SIZE */
- shlr2 r3
- shlr2 r3
-5:
- dt r3
-
- /* regular kexec just overwrites the destination page
- * with the contents of the source page.
- * for the kexec jump case we need to swap the contents
- * of the pages.
- * to keep it simple swap the contents for both cases.
- */
- mov.l @(0, r2), r8
- mov.l @(0, r5), r1
- mov.l r8, @(0, r5)
- mov.l r1, @(0, r2)
-
- mov.l @(4, r2), r8
- mov.l @(4, r5), r1
- mov.l r8, @(4, r5)
- mov.l r1, @(4, r2)
-
- mov.l @(8, r2), r8
- mov.l @(8, r5), r1
- mov.l r8, @(8, r5)
- mov.l r1, @(8, r2)
-
- mov.l @(12, r2), r8
- mov.l @(12, r5), r1
- mov.l r8, @(12, r5)
- mov.l r1, @(12, r2)
-
- add #16,r5
- add #16,r2
- bf 5b
-
- bra 0b
- nop
-
- .align 2
-10:
- .long PAGE_SIZE
-11:
- .long 0
-12:
- .long 0x20000000 ! RB=1
-
-relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-relocate_new_kernel_size:
- .long relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
deleted file mode 100644
index 8838094c9ff944..00000000000000
--- a/arch/sh/kernel/return_address.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/return_address.c
- *
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dwarf.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-void *return_address(unsigned int depth)
-{
- struct dwarf_frame *frame;
- unsigned long ra;
- int i;
-
- for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
- struct dwarf_frame *tmp;
-
- tmp = dwarf_unwind_stack(ra, frame);
- if (!tmp)
- return NULL;
-
- if (frame)
- dwarf_free_frame(frame);
-
- frame = tmp;
-
- if (!frame || !frame->return_addr)
- break;
-
- ra = frame->return_addr;
- }
-
- /* Failed to unwind the stack to the specified depth. */
- WARN_ON(i != depth + 1);
-
- if (frame)
- dwarf_free_frame(frame);
-
- return (void *)ra;
-}
-
-#else
-
-void *return_address(unsigned int depth)
-{
- return NULL;
-}
-
-#endif
-
-EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
deleted file mode 100644
index 1fcb6659822a30..00000000000000
--- a/arch/sh/kernel/setup.c
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/setup.c
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/utsname.h>
-#include <linux/nodemask.h>
-#include <linux/cpu.h>
-#include <linux/pfn.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/err.h>
-#include <linux/crash_dump.h>
-#include <linux/mmzone.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/uaccess.h>
-#include <uapi/linux/mount.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/elf.h>
-#include <asm/sections.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/clock.h>
-#include <asm/smp.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/sparsemem.h>
-#include <asm/platform_early.h>
-
-/*
- * Initialize loops_per_jiffy as 10000000 (1000MIPS).
- * This value will be used at the very early stage of serial setup.
- * The bigger value means no problem.
- */
-struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
- [0] = {
- .type = CPU_SH_NONE,
- .family = CPU_FAMILY_UNKNOWN,
- .loops_per_jiffy = 10000000,
- .phys_bits = MAX_PHYSMEM_BITS,
- },
-};
-EXPORT_SYMBOL(cpu_data);
-
-/*
- * The machine vector. First entry in .machvec.init, or clobbered by
- * sh_mv= on the command line, prior to .machvec.init teardown.
- */
-struct sh_machine_vector sh_mv = { .mv_name = "generic", };
-EXPORT_SYMBOL(sh_mv);
-
-#ifdef CONFIG_VT
-struct screen_info screen_info;
-#endif
-
-extern int root_mountflags;
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-
-static struct resource code_resource = {
- .name = "Kernel code",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource data_resource = {
- .name = "Kernel data",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-unsigned long memory_start;
-EXPORT_SYMBOL(memory_start);
-unsigned long memory_end = 0;
-EXPORT_SYMBOL(memory_end);
-unsigned long memory_limit = 0;
-
-static struct resource mem_resources[MAX_NUMNODES];
-
-int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-static int __init early_parse_mem(char *p)
-{
- if (!p)
- return 1;
-
- memory_limit = PAGE_ALIGN(memparse(p, &p));
-
- pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
-
- return 0;
-}
-early_param("mem", early_parse_mem);
-
-void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- unsigned long start, end;
-
- /*
- * Check for the rare cases where boot loaders adhere to the boot
- * ABI.
- */
- if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
- goto disable;
-
- start = INITRD_START + __MEMORY_START;
- end = start + INITRD_SIZE;
-
- if (unlikely(end <= start))
- goto disable;
- if (unlikely(start & ~PAGE_MASK)) {
- pr_err("initrd must be page aligned\n");
- goto disable;
- }
-
- if (unlikely(start < __MEMORY_START)) {
- pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",
- start, __MEMORY_START);
- goto disable;
- }
-
- if (unlikely(end > memblock_end_of_DRAM())) {
- pr_err("initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- end, (unsigned long)memblock_end_of_DRAM());
- goto disable;
- }
-
- /*
- * If we got this far in spite of the boot loader's best efforts
- * to the contrary, assume we actually have a valid initrd and
- * fix up the root dev.
- */
- ROOT_DEV = Root_RAM0;
-
- /*
- * Address sanitization
- */
- initrd_start = (unsigned long)__va(start);
- initrd_end = initrd_start + INITRD_SIZE;
-
- memblock_reserve(__pa(initrd_start), INITRD_SIZE);
-
- return;
-
-disable:
- pr_info("initrd disabled\n");
- initrd_start = initrd_end = 0;
-#endif
-}
-
-#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
-void calibrate_delay(void)
-{
- struct clk *clk = clk_get(NULL, "cpu_clk");
-
- if (IS_ERR(clk))
- panic("Need a sane CPU clock definition!");
-
- loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
-
- printk(KERN_INFO "Calibrating delay loop (skipped)... "
- "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100,
- loops_per_jiffy);
-}
-#endif
-
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- struct resource *res = &mem_resources[nid];
- unsigned long start, end;
-
- WARN_ON(res->name); /* max one active range per node for now */
-
- start = start_pfn << PAGE_SHIFT;
- end = end_pfn << PAGE_SHIFT;
-
- res->name = "System RAM";
- res->start = start;
- res->end = end - 1;
- res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
- if (request_resource(&iomem_resource, res)) {
- pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
- start_pfn, end_pfn);
- return;
- }
-
- /*
- * We don't know which RAM region contains kernel data or
- * the reserved crashkernel region, so try it repeatedly
- * and let the resource manager test it.
- */
- request_resource(res, &code_resource);
- request_resource(res, &data_resource);
- request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
-#endif
-
- /*
- * Also make sure that there is a PMB mapping that covers this
- * range before we attempt to activate it, to avoid reset by MMU.
- * We can hit this path with NUMA or memory hot-add.
- */
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_set_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn),
- &memblock.memory, nid);
-}
-
-void __init __weak plat_early_device_setup(void)
-{
-}
-
-#ifdef CONFIG_OF_FLATTREE
-void __ref sh_fdt_init(phys_addr_t dt_phys)
-{
- static int done = 0;
- void *dt_virt;
-
- /* Avoid calling an __init function on secondary cpus. */
- if (done) return;
-
-#ifdef CONFIG_USE_BUILTIN_DTB
- dt_virt = __dtb_start;
-#else
- dt_virt = phys_to_virt(dt_phys);
-#endif
-
- if (!dt_virt || !early_init_dt_scan(dt_virt)) {
- pr_crit("Error: invalid device tree blob"
- " at physical address %p\n", (void *)dt_phys);
-
- while (true)
- cpu_relax();
- }
-
- done = 1;
-}
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
- enable_mmu();
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
- printk(KERN_NOTICE "Boot params:\n"
- "... MOUNT_ROOT_RDONLY - %08lx\n"
- "... RAMDISK_FLAGS - %08lx\n"
- "... ORIG_ROOT_DEV - %08lx\n"
- "... LOADER_TYPE - %08lx\n"
- "... INITRD_START - %08lx\n"
- "... INITRD_SIZE - %08lx\n",
- MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
- ORIG_ROOT_DEV, LOADER_TYPE,
- INITRD_START, INITRD_SIZE);
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-#endif
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- setup_initial_init_mm(_text, _etext, _edata, _end);
-
- code_resource.start = virt_to_phys(_text);
- code_resource.end = virt_to_phys(_etext)-1;
- data_resource.start = virt_to_phys(_etext);
- data_resource.end = virt_to_phys(_edata)-1;
- bss_resource.start = virt_to_phys(__bss_start);
- bss_resource.end = virt_to_phys(__bss_stop)-1;
-
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#ifdef CONFIG_CMDLINE_EXTEND
- strlcat(command_line, " ", sizeof(command_line));
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
-#endif
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_early_param();
-
- plat_early_device_setup();
-
- sh_mv_setup();
-
- /* Let earlyprintk output early console messages */
- sh_early_platform_driver_probe("earlyprintk", 1, 1);
-
-#ifdef CONFIG_OF_FLATTREE
-#ifdef CONFIG_USE_BUILTIN_DTB
- unflatten_and_copy_device_tree();
-#else
- unflatten_device_tree();
-#endif
-#endif
-
- paging_init();
-
- /* Perform the machine specific initialisation */
- if (likely(sh_mv.mv_setup))
- sh_mv.mv_setup(cmdline_p);
-
- plat_smp_setup();
-}
-
-/* processor boot mode configuration */
-int generic_mode_pins(void)
-{
- pr_warn("generic_mode_pins(): missing mode pin configuration\n");
- return 0;
-}
-
-int test_mode_pin(int pin)
-{
- return sh_mv.mv_mode_pins() & pin;
-}
diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c
deleted file mode 100644
index 250dbdf3fa7497..00000000000000
--- a/arch/sh/kernel/sh_bios.c
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * C interface for trapping into the standard LinuxSH BIOS.
- *
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 - 2010 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <asm/sh_bios.h>
-
-#define BIOS_CALL_CONSOLE_WRITE 0
-#define BIOS_CALL_ETH_NODE_ADDR 10
-#define BIOS_CALL_SHUTDOWN 11
-#define BIOS_CALL_GDB_DETACH 0xff
-
-void *gdb_vbr_vector = NULL;
-
-static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
- long arg3)
-{
- register long r0 __asm__("r0") = func;
- register long r4 __asm__("r4") = arg0;
- register long r5 __asm__("r5") = arg1;
- register long r6 __asm__("r6") = arg2;
- register long r7 __asm__("r7") = arg3;
-
- if (!gdb_vbr_vector)
- return -ENOSYS;
-
- __asm__ __volatile__("trapa #0x3f":"=z"(r0)
- :"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
- :"memory");
- return r0;
-}
-
-void sh_bios_console_write(const char *buf, unsigned int len)
-{
- sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
-}
-
-void sh_bios_gdb_detach(void)
-{
- sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_gdb_detach);
-
-void sh_bios_get_node_addr(unsigned char *node_addr)
-{
- sh_bios_call(BIOS_CALL_ETH_NODE_ADDR, 0, (long)node_addr, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_get_node_addr);
-
-void sh_bios_shutdown(unsigned int how)
-{
- sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
-}
-
-/*
- * Read the old value of the VBR register to initialise the vector
- * through which debug and BIOS traps are delegated by the Linux trap
- * handler.
- */
-void sh_bios_vbr_init(void)
-{
- unsigned long vbr;
-
- if (unlikely(gdb_vbr_vector))
- return;
-
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
-
- if (vbr) {
- gdb_vbr_vector = (void *)(vbr + 0x100);
- printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
- gdb_vbr_vector);
- } else
- printk(KERN_NOTICE "SH-BIOS not detected\n");
-}
-
-/**
- * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
- *
- * This can be used by save/restore code to reinitialize the system VBR
- * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
- */
-void sh_bios_vbr_reload(void)
-{
- if (gdb_vbr_vector)
- __asm__ __volatile__ (
- "ldc %0, vbr"
- :
- : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
- : "memory"
- );
-}
-
-#ifdef CONFIG_EARLY_PRINTK
-/*
- * Print a string through the BIOS
- */
-static void sh_console_write(struct console *co, const char *s,
- unsigned count)
-{
- sh_bios_console_write(s, count);
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init sh_console_setup(struct console *co, char *options)
-{
- int cflag = CREAD | HUPCL | CLOCAL;
-
- /*
- * Now construct a cflag setting.
- * TODO: this is a totally bogus cflag, as we have
- * no idea what serial settings the BIOS is using, or
- * even if its using the serial port at all.
- */
- cflag |= B115200 | CS8 | /*no parity*/0;
-
- co->cflag = cflag;
-
- return 0;
-}
-
-static struct console bios_console = {
- .name = "bios",
- .write = sh_console_write,
- .setup = sh_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
- int keep_early = 0;
-
- if (!buf)
- return 0;
-
- if (strstr(buf, "keep"))
- keep_early = 1;
-
- if (!strncmp(buf, "bios", 4))
- early_console = &bios_console;
-
- if (likely(early_console)) {
- if (keep_early)
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
- }
-
- return 0;
-}
-early_param("earlyprintk", setup_early_printk);
-#endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
deleted file mode 100644
index 5858936cb43111..00000000000000
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <asm/checksum.h>
-#include <asm/sections.h>
-
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(empty_zero_page);
-#ifdef CONFIG_FLATMEM
-/* need in pfn_valid macro */
-EXPORT_SYMBOL(min_low_pfn);
-EXPORT_SYMBOL(max_low_pfn);
-#endif
-
-#define DECLARE_EXPORT(name) \
- extern void name(void);EXPORT_SYMBOL(name)
-
-DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__sdivsi3);
-DECLARE_EXPORT(__lshrsi3);
-DECLARE_EXPORT(__ashrsi3);
-DECLARE_EXPORT(__ashlsi3);
-DECLARE_EXPORT(__lshrsi3_r0);
-DECLARE_EXPORT(__ashrsi3_r0);
-DECLARE_EXPORT(__ashlsi3_r0);
-
-DECLARE_EXPORT(__ashiftrt_r4_0);
-DECLARE_EXPORT(__ashiftrt_r4_1);
-DECLARE_EXPORT(__ashiftrt_r4_2);
-DECLARE_EXPORT(__ashiftrt_r4_3);
-DECLARE_EXPORT(__ashiftrt_r4_4);
-DECLARE_EXPORT(__ashiftrt_r4_5);
-DECLARE_EXPORT(__ashiftrt_r4_6);
-DECLARE_EXPORT(__ashiftrt_r4_7);
-DECLARE_EXPORT(__ashiftrt_r4_8);
-DECLARE_EXPORT(__ashiftrt_r4_9);
-DECLARE_EXPORT(__ashiftrt_r4_10);
-DECLARE_EXPORT(__ashiftrt_r4_11);
-DECLARE_EXPORT(__ashiftrt_r4_12);
-DECLARE_EXPORT(__ashiftrt_r4_13);
-DECLARE_EXPORT(__ashiftrt_r4_14);
-DECLARE_EXPORT(__ashiftrt_r4_15);
-DECLARE_EXPORT(__ashiftrt_r4_16);
-DECLARE_EXPORT(__ashiftrt_r4_17);
-DECLARE_EXPORT(__ashiftrt_r4_18);
-DECLARE_EXPORT(__ashiftrt_r4_19);
-DECLARE_EXPORT(__ashiftrt_r4_20);
-DECLARE_EXPORT(__ashiftrt_r4_21);
-DECLARE_EXPORT(__ashiftrt_r4_22);
-DECLARE_EXPORT(__ashiftrt_r4_23);
-DECLARE_EXPORT(__ashiftrt_r4_24);
-DECLARE_EXPORT(__ashiftrt_r4_25);
-DECLARE_EXPORT(__ashiftrt_r4_26);
-DECLARE_EXPORT(__ashiftrt_r4_27);
-DECLARE_EXPORT(__ashiftrt_r4_28);
-DECLARE_EXPORT(__ashiftrt_r4_29);
-DECLARE_EXPORT(__ashiftrt_r4_30);
-DECLARE_EXPORT(__ashiftrt_r4_31);
-DECLARE_EXPORT(__ashiftrt_r4_32);
-DECLARE_EXPORT(__movstr);
-DECLARE_EXPORT(__movstrSI8);
-DECLARE_EXPORT(__movstrSI12);
-DECLARE_EXPORT(__movstrSI16);
-DECLARE_EXPORT(__movstrSI20);
-DECLARE_EXPORT(__movstrSI24);
-DECLARE_EXPORT(__movstrSI28);
-DECLARE_EXPORT(__movstrSI32);
-DECLARE_EXPORT(__movstrSI36);
-DECLARE_EXPORT(__movstrSI40);
-DECLARE_EXPORT(__movstrSI44);
-DECLARE_EXPORT(__movstrSI48);
-DECLARE_EXPORT(__movstrSI52);
-DECLARE_EXPORT(__movstrSI56);
-DECLARE_EXPORT(__movstrSI60);
-DECLARE_EXPORT(__movstr_i4_even);
-DECLARE_EXPORT(__movstr_i4_odd);
-DECLARE_EXPORT(__movstrSI12_i4);
-DECLARE_EXPORT(__movmem);
-DECLARE_EXPORT(__movmemSI8);
-DECLARE_EXPORT(__movmemSI12);
-DECLARE_EXPORT(__movmemSI16);
-DECLARE_EXPORT(__movmemSI20);
-DECLARE_EXPORT(__movmemSI24);
-DECLARE_EXPORT(__movmemSI28);
-DECLARE_EXPORT(__movmemSI32);
-DECLARE_EXPORT(__movmemSI36);
-DECLARE_EXPORT(__movmemSI40);
-DECLARE_EXPORT(__movmemSI44);
-DECLARE_EXPORT(__movmemSI48);
-DECLARE_EXPORT(__movmemSI52);
-DECLARE_EXPORT(__movmemSI56);
-DECLARE_EXPORT(__movmemSI60);
-DECLARE_EXPORT(__movmem_i4_even);
-DECLARE_EXPORT(__movmem_i4_odd);
-DECLARE_EXPORT(__movmemSI12_i4);
-DECLARE_EXPORT(__udiv_qrnnd_16);
-DECLARE_EXPORT(__sdivsi3_i4);
-DECLARE_EXPORT(__udivsi3_i4);
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udivsi3_i4i);
-#ifdef CONFIG_MCOUNT
-DECLARE_EXPORT(mcount);
-#endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
deleted file mode 100644
index 90f495d35db29a..00000000000000
--- a/arch/sh/kernel/signal_32.c
+++ /dev/null
@@ -1,507 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- *
- */
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/tty.h>
-#include <linux/elf.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/io.h>
-#include <linux/resume_user_mode.h>
-#include <asm/ucontext.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-struct fdpic_func_descriptor {
- unsigned long text;
- unsigned long GOT;
-};
-
-/*
- * The following define adds a 64 byte gap between the signal
- * stack frame and previous contents of the stack. This allows
- * frame unwinding in a function epilogue but only if a frame
- * pointer is used in the function. This is necessary because
- * current gcc compilers (<4.3) do not generate unwind info on
- * SH for function epilogues.
- */
-#define UNWINDGUARD 64
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
-#if defined(CONFIG_CPU_SH2)
-#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */
-#else
-#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */
-#endif
-#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */
-
-struct sigframe
-{
- struct sigcontext sc;
- unsigned long extramask[_NSIG_WORDS-1];
- u16 retcode[8];
-};
-
-struct rt_sigframe
-{
- struct siginfo info;
- struct ucontext uc;
- u16 retcode[8];
-};
-
-#ifdef CONFIG_SH_FPU
-static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- set_used_math();
- return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
- sizeof(long)*(16*2+2));
-}
-
-static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
- struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- if (!used_math())
- return __put_user(0, &sc->sc_ownedfp);
-
- if (__put_user(1, &sc->sc_ownedfp))
- return -EFAULT;
-
- /* This will cause a "finit" to be triggered by the next
- attempted FPU operation by the 'current' process.
- */
- clear_used_math();
-
- unlazy_fpu(tsk, regs);
- return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
- sizeof(long)*(16*2+2));
-}
-#endif /* CONFIG_SH_FPU */
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
-{
- unsigned int err = 0;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
- COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- int owned_fp;
- struct task_struct *tsk = current;
-
- regs->sr |= SR_FD; /* Release FPU */
- clear_fpu(tsk, regs);
- clear_used_math();
- err |= __get_user (owned_fp, &sc->sc_ownedfp);
- if (owned_fp)
- err |= restore_sigcontext_fpu(sc);
- }
-#endif
-
- regs->tra = -1; /* disable syscall checks */
- err |= __get_user(*r0_p, &sc->sc_regs[0]);
- return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->sc, &r0))
- goto badframe;
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
- goto badframe;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
-#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
- COPY(regs[0]); COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- err |= save_sigcontext_fpu(sc, regs);
-#endif
-
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(sp) == 0)
- sp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
-}
-
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-trapa.S. */
-extern void __kernel_sigreturn(void);
-extern void __kernel_rt_sigreturn(void);
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
- if (_NSIG_WORDS > 1)
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = 0;
- regs->regs[6] = (unsigned long) &frame->sc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(NULL, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->regs[15]);
- err |= setup_sigcontext(&frame->uc.uc_mcontext,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to rt_sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = (unsigned long) &frame->info;
- regs->regs[6] = (unsigned long) &frame->uc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static inline void
-handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
- struct sigaction *sa)
-{
- /* If we're not from a syscall, bail out */
- if (regs->tra < 0)
- return;
-
- /* check for system call restart.. */
- switch (regs->regs[0]) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- no_system_call_restart:
- regs->regs[0] = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(sa->sa_flags & SA_RESTART))
- goto no_system_call_restart;
- fallthrough;
- case -ERESTARTNOINTR:
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- break;
- }
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs, unsigned int save_r0)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
-
- /* Set up the stack frame */
- if (ksig->ka.sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(ksig, oldset, regs);
- else
- ret = setup_frame(ksig, oldset, regs);
-
- signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, unsigned int save_r0)
-{
- struct ksignal ksig;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return;
-
- if (get_signal(&ksig)) {
- handle_syscall_restart(save_r0, regs, &ksig.ka.sa);
-
- /* Whee! Actually deliver the signal. */
- handle_signal(&ksig, regs, save_r0);
- return;
- }
-
- /* Did we come from a system call? */
- if (regs->tra >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->regs[0] == -ERESTARTNOHAND ||
- regs->regs[0] == -ERESTARTSYS ||
- regs->regs[0] == -ERESTARTNOINTR) {
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- regs->regs[3] = __NR_restart_syscall;
- }
- }
-
- /*
- * If there's no signal to deliver, we just put the saved sigmask
- * back.
- */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags)
-{
- /* deal with pending signal delivery */
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
- do_signal(regs, save_r0);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME)
- resume_user_mode_work(regs);
-}
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
deleted file mode 100644
index 65924d9ec24598..00000000000000
--- a/arch/sh/kernel/smp.c
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/smp.c
- *
- * SMP support for the SuperH processors.
- *
- * Copyright (C) 2002 - 2010 Paul Mundt
- * Copyright (C) 2006 - 2007 Akio Idehara
- */
-#include <linux/err.h>
-#include <linux/cache.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/hotplug.h>
-#include <linux/atomic.h>
-#include <linux/clockchips.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
-int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */
-
-struct plat_smp_ops *mp_ops = NULL;
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-void register_smp_ops(struct plat_smp_ops *ops)
-{
- if (mp_ops)
- printk(KERN_WARNING "Overriding previously set SMP ops\n");
-
- mp_ops = ops;
-}
-
-static inline void smp_store_cpu_info(unsigned int cpu)
-{
- struct sh_cpuinfo *c = cpu_data + cpu;
-
- memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
-
- c->loops_per_jiffy = loops_per_jiffy;
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- unsigned int cpu = smp_processor_id();
-
- init_new_context(current, &init_mm);
- current_thread_info()->cpu = cpu;
- mp_ops->prepare_cpus(max_cpus);
-
-#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(cpu_possible_mask);
-#endif
-}
-
-void __init smp_prepare_boot_cpu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- __cpu_number_map[0] = cpu;
- __cpu_logical_map[0] = cpu;
-
- set_cpu_online(cpu, true);
- set_cpu_possible(cpu, true);
-
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void native_cpu_die(unsigned int cpu)
-{
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- smp_rmb();
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- if (system_state == SYSTEM_RUNNING)
- pr_info("CPU %u is now offline\n", cpu);
-
- return;
- }
-
- msleep(100);
- }
-
- pr_err("CPU %u didn't die...\n", cpu);
-}
-
-int native_cpu_disable(unsigned int cpu)
-{
- return cpu == 0 ? -EPERM : 0;
-}
-
-void play_dead_common(void)
-{
- idle_task_exit();
- irq_ctx_exit(raw_smp_processor_id());
- mb();
-
- __this_cpu_write(cpu_state, CPU_DEAD);
- local_irq_disable();
-}
-
-void native_play_dead(void)
-{
- play_dead_common();
-}
-
-int __cpu_disable(void)
-{
- unsigned int cpu = smp_processor_id();
- int ret;
-
- ret = mp_ops->cpu_disable(cpu);
- if (ret)
- return ret;
-
- /*
- * Take this CPU offline. Once we clear this, we can't return,
- * and we must not schedule until we're ready to give up the cpu.
- */
- set_cpu_online(cpu, false);
-
- /*
- * OK - migrate IRQs away from this CPU
- */
- migrate_irqs();
-
- /*
- * Flush user cache and TLB mappings, and then remove this CPU
- * from the vm mask set of all processes.
- */
- flush_cache_all();
-#ifdef CONFIG_MMU
- local_flush_tlb_all();
-#endif
-
- clear_tasks_mm_cpumask(cpu);
-
- return 0;
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int native_cpu_disable(unsigned int cpu)
-{
- return -ENOSYS;
-}
-
-void native_cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-
-void native_play_dead(void)
-{
- BUG();
-}
-#endif
-
-asmlinkage void start_secondary(void)
-{
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm = &init_mm;
-
- enable_mmu();
- mmgrab(mm);
- mmget(mm);
- current->active_mm = mm;
-#ifdef CONFIG_MMU
- enter_lazy_tlb(mm, current);
- local_flush_tlb_all();
-#endif
-
- per_cpu_trap_init();
-
- notify_cpu_starting(cpu);
-
- local_irq_enable();
-
- calibrate_delay();
-
- smp_store_cpu_info(cpu);
-
- set_cpu_online(cpu, true);
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-
- cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-}
-
-extern struct {
- unsigned long sp;
- unsigned long bss_start;
- unsigned long bss_end;
- void *start_kernel_fn;
- void *cpu_init_fn;
- void *thread_info;
-} stack_start;
-
-int __cpu_up(unsigned int cpu, struct task_struct *tsk)
-{
- unsigned long timeout;
-
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-
- /* Fill in data in head.S for secondary cpus */
- stack_start.sp = tsk->thread.sp;
- stack_start.thread_info = tsk->stack;
- stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
- stack_start.start_kernel_fn = start_secondary;
-
- flush_icache_range((unsigned long)&stack_start,
- (unsigned long)&stack_start + sizeof(stack_start));
- wmb();
-
- mp_ops->start_cpu(cpu, (unsigned long)_stext);
-
- timeout = jiffies + HZ;
- while (time_before(jiffies, timeout)) {
- if (cpu_online(cpu))
- break;
-
- udelay(10);
- barrier();
- }
-
- if (cpu_online(cpu))
- return 0;
-
- return -ENOENT;
-}
-
-void __init smp_cpus_done(unsigned int max_cpus)
-{
- unsigned long bogosum = 0;
- int cpu;
-
- for_each_online_cpu(cpu)
- bogosum += cpu_data[cpu].loops_per_jiffy;
-
- printk(KERN_INFO "SMP: Total of %d processors activated "
- "(%lu.%02lu BogoMIPS).\n", num_online_cpus(),
- bogosum / (500000/HZ),
- (bogosum / (5000/HZ)) % 100);
-}
-
-void smp_send_reschedule(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_RESCHEDULE);
-}
-
-void smp_send_stop(void)
-{
- smp_call_function(stop_this_cpu, 0, 0);
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION);
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
-}
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-void tick_broadcast(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_TIMER);
-}
-
-static void ipi_timer(void)
-{
- irq_enter();
- tick_receive_broadcast();
- irq_exit();
-}
-#endif
-
-void smp_message_recv(unsigned int msg)
-{
- switch (msg) {
- case SMP_MSG_FUNCTION:
- generic_smp_call_function_interrupt();
- break;
- case SMP_MSG_RESCHEDULE:
- scheduler_ipi();
- break;
- case SMP_MSG_FUNCTION_SINGLE:
- generic_smp_call_function_single_interrupt();
- break;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- case SMP_MSG_TIMER:
- ipi_timer();
- break;
-#endif
- default:
- printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
- smp_processor_id(), __func__, msg);
- break;
- }
-}
-
-/* Not really SMP stuff ... */
-int setup_profiling_timer(unsigned int multiplier)
-{
- return 0;
-}
-
-#ifdef CONFIG_MMU
-
-static void flush_tlb_all_ipi(void *info)
-{
- local_flush_tlb_all();
-}
-
-void flush_tlb_all(void)
-{
- on_each_cpu(flush_tlb_all_ipi, 0, 1);
-}
-
-static void flush_tlb_mm_ipi(void *mm)
-{
- local_flush_tlb_mm((struct mm_struct *)mm);
-}
-
-/*
- * The following tlb flush calls are invoked when old translations are
- * being torn down, or pte attributes are changing. For single threaded
- * address spaces, a new context is obtained on the current cpu, and tlb
- * context on other cpus are invalidated to force a new context allocation
- * at switch_mm time, should the mm ever be used on other cpus. For
- * multithreaded address spaces, intercpu interrupts have to be sent.
- * Another case where intercpu interrupts are required is when the target
- * mm might be active on another cpu (eg debuggers doing the flushes on
- * behalf of debugees, kswapd stealing pages from another process etc).
- * Kanoj 07/00.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
- preempt_disable();
-
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_mm(mm);
-
- preempt_enable();
-}
-
-struct flush_tlb_data {
- struct vm_area_struct *vma;
- unsigned long addr1;
- unsigned long addr2;
-};
-
-static void flush_tlb_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
-
- preempt_disable();
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = start;
- fd.addr2 = end;
- smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_range(vma, start, end);
- preempt_enable();
-}
-
-static void flush_tlb_kernel_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = start;
- fd.addr2 = end;
- on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
-}
-
-static void flush_tlb_page_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_page(fd->vma, fd->addr1);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- preempt_disable();
- if ((atomic_read(&vma->vm_mm->mm_users) != 1) ||
- (current->mm != vma->vm_mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = page;
- smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, vma->vm_mm) = 0;
- }
- local_flush_tlb_page(vma, page);
- preempt_enable();
-}
-
-static void flush_tlb_one_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
- local_flush_tlb_one(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_one(unsigned long asid, unsigned long vaddr)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = asid;
- fd.addr2 = vaddr;
-
- smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
- local_flush_tlb_one(asid, vaddr);
-}
-
-#endif
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
deleted file mode 100644
index daf0b53ee066fa..00000000000000
--- a/arch/sh/kernel/stacktrace.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/stacktrace.c
- *
- * Stack trace management functions
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- */
-static void save_stack_address(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = data;
-
- if (!reliable)
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops = {
- .address = save_stack_address,
-};
-
-void save_stack_trace(struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)current_stack_pointer;
-
- unwind_stack(current, NULL, sp, &save_stack_ops, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-
-static void
-save_stack_address_nosched(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = (struct stack_trace *)data;
-
- if (!reliable)
- return;
-
- if (in_sched_functions(addr))
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops_nosched = {
- .address = save_stack_address_nosched,
-};
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)tsk->thread.sp;
-
- unwind_stack(current, NULL, sp, &save_stack_ops_nosched, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c
deleted file mode 100644
index 0b772d6d714fed..00000000000000
--- a/arch/sh/kernel/swsusp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * swsusp.c - SuperH hibernation support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <asm/fpu.h>
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
- return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
- init_fpu(current);
-}
-
-void restore_processor_state(void)
-{
- local_flush_tlb_all();
-}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
deleted file mode 100644
index a5a7b33ed81ae9..00000000000000
--- a/arch/sh/kernel/sys_sh.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/sys_sh.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/SuperH
- * platform.
- *
- * Taken from i386 version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/syscalls.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/cacheflush.h>
-#include <asm/cachectl.h>
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off)
-{
- if (off & ~PAGE_MASK)
- return -EINVAL;
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- /*
- * The shift for mmap2 is constant, regardless of PAGE_SIZE
- * setting.
- */
- if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
- return -EINVAL;
-
- pgoff >>= PAGE_SHIFT - 12;
-
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
-}
-
-/* sys_cacheflush -- flush (part of) the processor cache. */
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
-{
- struct vm_area_struct *vma;
-
- if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
- return -EINVAL;
-
- /*
- * Verify that the specified address region actually belongs
- * to this process.
- */
- if (addr + len < addr)
- return -EFAULT;
-
- mmap_read_lock(current->mm);
- vma = find_vma (current->mm, addr);
- if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
-
- switch (op & CACHEFLUSH_D_PURGE) {
- case CACHEFLUSH_D_INVAL:
- __flush_invalidate_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_WB:
- __flush_wback_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_PURGE:
- __flush_purge_region((void *)addr, len);
- break;
- }
-
- if (op & CACHEFLUSH_I)
- flush_icache_range(addr, addr+len);
-
- mmap_read_unlock(current->mm);
- return 0;
-}
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
deleted file mode 100644
index 9dca568509a5e5..00000000000000
--- a/arch/sh/kernel/sys_sh32.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/syscalls.h>
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_sh_pipe(void)
-{
- int fd[2];
- int error;
-
- error = do_pipe_flags(fd, 0);
- if (!error) {
- current_pt_regs()->regs[1] = fd[1];
- return fd[0];
- }
- return error;
-}
-
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pread64(fd, buf, count, pos);
-}
-
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pwrite64(fd, buf, count, pos);
-}
-
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice)
-{
-#ifdef __LITTLE_ENDIAN__
- return ksys_fadvise64_64(fd, (u64)offset1 << 32 | offset0,
- (u64)len1 << 32 | len0, advice);
-#else
- return ksys_fadvise64_64(fd, (u64)offset0 << 32 | offset1,
- (u64)len0 << 32 | len1, advice);
-#endif
-}
diff --git a/arch/sh/kernel/syscalls/Makefile b/arch/sh/kernel/syscalls/Makefile
deleted file mode 100644
index b265e4bc16c2e0..00000000000000
--- a/arch/sh/kernel/syscalls/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-kapi := arch/$(SRCARCH)/include/generated/asm
-uapi := arch/$(SRCARCH)/include/generated/uapi/asm
-
-$(shell mkdir -p $(uapi) $(kapi))
-
-syscall := $(src)/syscall.tbl
-syshdr := $(srctree)/scripts/syscallhdr.sh
-systbl := $(srctree)/scripts/syscalltbl.sh
-
-quiet_cmd_syshdr = SYSHDR $@
- cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
-
-quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
-
-$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
- $(call if_changed,syshdr)
-
-$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-uapisyshdr-y += unistd_32.h
-kapisyshdr-y += syscall_table.h
-
-uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
-kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
-targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
-
-PHONY += all
-all: $(uapisyshdr-y) $(kapisyshdr-y)
- @:
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
deleted file mode 100644
index 2de85c977f54f9..00000000000000
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ /dev/null
@@ -1,455 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
-#
-# system call numbers and entry vectors for sh
-#
-# The format is:
-# <number> <abi> <name> <entry point>
-#
-# The <abi> is always "common" for this file
-#
-0 common restart_syscall sys_restart_syscall
-1 common exit sys_exit
-2 common fork sys_fork
-3 common read sys_read
-4 common write sys_write
-5 common open sys_open
-6 common close sys_close
-7 common waitpid sys_waitpid
-8 common creat sys_creat
-9 common link sys_link
-10 common unlink sys_unlink
-11 common execve sys_execve
-12 common chdir sys_chdir
-13 common time sys_time32
-14 common mknod sys_mknod
-15 common chmod sys_chmod
-16 common lchown sys_lchown16
-# 17 was break
-18 common oldstat sys_stat
-19 common lseek sys_lseek
-20 common getpid sys_getpid
-21 common mount sys_mount
-22 common umount sys_oldumount
-23 common setuid sys_setuid16
-24 common getuid sys_getuid16
-25 common stime sys_stime32
-26 common ptrace sys_ptrace
-27 common alarm sys_alarm
-28 common oldfstat sys_fstat
-29 common pause sys_pause
-30 common utime sys_utime32
-# 31 was stty
-# 32 was gtty
-33 common access sys_access
-34 common nice sys_nice
-# 35 was ftime
-36 common sync sys_sync
-37 common kill sys_kill
-38 common rename sys_rename
-39 common mkdir sys_mkdir
-40 common rmdir sys_rmdir
-41 common dup sys_dup
-42 common pipe sys_sh_pipe
-43 common times sys_times
-# 44 was prof
-45 common brk sys_brk
-46 common setgid sys_setgid16
-47 common getgid sys_getgid16
-48 common signal sys_signal
-49 common geteuid sys_geteuid16
-50 common getegid sys_getegid16
-51 common acct sys_acct
-52 common umount2 sys_umount
-# 53 was lock
-54 common ioctl sys_ioctl
-55 common fcntl sys_fcntl
-# 56 was mpx
-57 common setpgid sys_setpgid
-# 58 was ulimit
-# 59 was olduname
-60 common umask sys_umask
-61 common chroot sys_chroot
-62 common ustat sys_ustat
-63 common dup2 sys_dup2
-64 common getppid sys_getppid
-65 common getpgrp sys_getpgrp
-66 common setsid sys_setsid
-67 common sigaction sys_sigaction
-68 common sgetmask sys_sgetmask
-69 common ssetmask sys_ssetmask
-70 common setreuid sys_setreuid16
-71 common setregid sys_setregid16
-72 common sigsuspend sys_sigsuspend
-73 common sigpending sys_sigpending
-74 common sethostname sys_sethostname
-75 common setrlimit sys_setrlimit
-76 common getrlimit sys_old_getrlimit
-77 common getrusage sys_getrusage
-78 common gettimeofday sys_gettimeofday
-79 common settimeofday sys_settimeofday
-80 common getgroups sys_getgroups16
-81 common setgroups sys_setgroups16
-# 82 was select
-83 common symlink sys_symlink
-84 common oldlstat sys_lstat
-85 common readlink sys_readlink
-86 common uselib sys_uselib
-87 common swapon sys_swapon
-88 common reboot sys_reboot
-89 common readdir sys_old_readdir
-90 common mmap old_mmap
-91 common munmap sys_munmap
-92 common truncate sys_truncate
-93 common ftruncate sys_ftruncate
-94 common fchmod sys_fchmod
-95 common fchown sys_fchown16
-96 common getpriority sys_getpriority
-97 common setpriority sys_setpriority
-# 98 was profil
-99 common statfs sys_statfs
-100 common fstatfs sys_fstatfs
-# 101 was ioperm
-102 common socketcall sys_socketcall
-103 common syslog sys_syslog
-104 common setitimer sys_setitimer
-105 common getitimer sys_getitimer
-106 common stat sys_newstat
-107 common lstat sys_newlstat
-108 common fstat sys_newfstat
-109 common olduname sys_uname
-# 110 was iopl
-111 common vhangup sys_vhangup
-# 112 was idle
-# 113 was vm86old
-114 common wait4 sys_wait4
-115 common swapoff sys_swapoff
-116 common sysinfo sys_sysinfo
-117 common ipc sys_ipc
-118 common fsync sys_fsync
-119 common sigreturn sys_sigreturn
-120 common clone sys_clone
-121 common setdomainname sys_setdomainname
-122 common uname sys_newuname
-123 common cacheflush sys_cacheflush
-124 common adjtimex sys_adjtimex_time32
-125 common mprotect sys_mprotect
-126 common sigprocmask sys_sigprocmask
-# 127 was create_module
-128 common init_module sys_init_module
-129 common delete_module sys_delete_module
-# 130 was get_kernel_syms
-131 common quotactl sys_quotactl
-132 common getpgid sys_getpgid
-133 common fchdir sys_fchdir
-134 common bdflush sys_ni_syscall
-135 common sysfs sys_sysfs
-136 common personality sys_personality
-# 137 was afs_syscall
-138 common setfsuid sys_setfsuid16
-139 common setfsgid sys_setfsgid16
-140 common _llseek sys_llseek
-141 common getdents sys_getdents
-142 common _newselect sys_select
-143 common flock sys_flock
-144 common msync sys_msync
-145 common readv sys_readv
-146 common writev sys_writev
-147 common getsid sys_getsid
-148 common fdatasync sys_fdatasync
-149 common _sysctl sys_ni_syscall
-150 common mlock sys_mlock
-151 common munlock sys_munlock
-152 common mlockall sys_mlockall
-153 common munlockall sys_munlockall
-154 common sched_setparam sys_sched_setparam
-155 common sched_getparam sys_sched_getparam
-156 common sched_setscheduler sys_sched_setscheduler
-157 common sched_getscheduler sys_sched_getscheduler
-158 common sched_yield sys_sched_yield
-159 common sched_get_priority_max sys_sched_get_priority_max
-160 common sched_get_priority_min sys_sched_get_priority_min
-161 common sched_rr_get_interval sys_sched_rr_get_interval_time32
-162 common nanosleep sys_nanosleep_time32
-163 common mremap sys_mremap
-164 common setresuid sys_setresuid16
-165 common getresuid sys_getresuid16
-# 166 was vm86
-# 167 was query_module
-168 common poll sys_poll
-169 common nfsservctl sys_ni_syscall
-170 common setresgid sys_setresgid16
-171 common getresgid sys_getresgid16
-172 common prctl sys_prctl
-173 common rt_sigreturn sys_rt_sigreturn
-174 common rt_sigaction sys_rt_sigaction
-175 common rt_sigprocmask sys_rt_sigprocmask
-176 common rt_sigpending sys_rt_sigpending
-177 common rt_sigtimedwait sys_rt_sigtimedwait_time32
-178 common rt_sigqueueinfo sys_rt_sigqueueinfo
-179 common rt_sigsuspend sys_rt_sigsuspend
-180 common pread64 sys_pread_wrapper
-181 common pwrite64 sys_pwrite_wrapper
-182 common chown sys_chown16
-183 common getcwd sys_getcwd
-184 common capget sys_capget
-185 common capset sys_capset
-186 common sigaltstack sys_sigaltstack
-187 common sendfile sys_sendfile
-# 188 is reserved for getpmsg
-# 189 is reserved for putpmsg
-190 common vfork sys_vfork
-191 common ugetrlimit sys_getrlimit
-192 common mmap2 sys_mmap2
-193 common truncate64 sys_truncate64
-194 common ftruncate64 sys_ftruncate64
-195 common stat64 sys_stat64
-196 common lstat64 sys_lstat64
-197 common fstat64 sys_fstat64
-198 common lchown32 sys_lchown
-199 common getuid32 sys_getuid
-200 common getgid32 sys_getgid
-201 common geteuid32 sys_geteuid
-202 common getegid32 sys_getegid
-203 common setreuid32 sys_setreuid
-204 common setregid32 sys_setregid
-205 common getgroups32 sys_getgroups
-206 common setgroups32 sys_setgroups
-207 common fchown32 sys_fchown
-208 common setresuid32 sys_setresuid
-209 common getresuid32 sys_getresuid
-210 common setresgid32 sys_setresgid
-211 common getresgid32 sys_getresgid
-212 common chown32 sys_chown
-213 common setuid32 sys_setuid
-214 common setgid32 sys_setgid
-215 common setfsuid32 sys_setfsuid
-216 common setfsgid32 sys_setfsgid
-217 common pivot_root sys_pivot_root
-218 common mincore sys_mincore
-219 common madvise sys_madvise
-220 common getdents64 sys_getdents64
-221 common fcntl64 sys_fcntl64
-# 222 is reserved for tux
-# 223 is unused
-224 common gettid sys_gettid
-225 common readahead sys_readahead
-226 common setxattr sys_setxattr
-227 common lsetxattr sys_lsetxattr
-228 common fsetxattr sys_fsetxattr
-229 common getxattr sys_getxattr
-230 common lgetxattr sys_lgetxattr
-231 common fgetxattr sys_fgetxattr
-232 common listxattr sys_listxattr
-233 common llistxattr sys_llistxattr
-234 common flistxattr sys_flistxattr
-235 common removexattr sys_removexattr
-236 common lremovexattr sys_lremovexattr
-237 common fremovexattr sys_fremovexattr
-238 common tkill sys_tkill
-239 common sendfile64 sys_sendfile64
-240 common futex sys_futex_time32
-241 common sched_setaffinity sys_sched_setaffinity
-242 common sched_getaffinity sys_sched_getaffinity
-# 243 is reserved for set_thread_area
-# 244 is reserved for get_thread_area
-245 common io_setup sys_io_setup
-246 common io_destroy sys_io_destroy
-247 common io_getevents sys_io_getevents_time32
-248 common io_submit sys_io_submit
-249 common io_cancel sys_io_cancel
-250 common fadvise64 sys_fadvise64
-# 251 is unused
-252 common exit_group sys_exit_group
-253 common lookup_dcookie sys_lookup_dcookie
-254 common epoll_create sys_epoll_create
-255 common epoll_ctl sys_epoll_ctl
-256 common epoll_wait sys_epoll_wait
-257 common remap_file_pages sys_remap_file_pages
-258 common set_tid_address sys_set_tid_address
-259 common timer_create sys_timer_create
-260 common timer_settime sys_timer_settime32
-261 common timer_gettime sys_timer_gettime32
-262 common timer_getoverrun sys_timer_getoverrun
-263 common timer_delete sys_timer_delete
-264 common clock_settime sys_clock_settime32
-265 common clock_gettime sys_clock_gettime32
-266 common clock_getres sys_clock_getres_time32
-267 common clock_nanosleep sys_clock_nanosleep_time32
-268 common statfs64 sys_statfs64
-269 common fstatfs64 sys_fstatfs64
-270 common tgkill sys_tgkill
-271 common utimes sys_utimes_time32
-272 common fadvise64_64 sys_fadvise64_64_wrapper
-# 273 is reserved for vserver
-274 common mbind sys_mbind
-275 common get_mempolicy sys_get_mempolicy
-276 common set_mempolicy sys_set_mempolicy
-277 common mq_open sys_mq_open
-278 common mq_unlink sys_mq_unlink
-279 common mq_timedsend sys_mq_timedsend_time32
-280 common mq_timedreceive sys_mq_timedreceive_time32
-281 common mq_notify sys_mq_notify
-282 common mq_getsetattr sys_mq_getsetattr
-283 common kexec_load sys_kexec_load
-284 common waitid sys_waitid
-285 common add_key sys_add_key
-286 common request_key sys_request_key
-287 common keyctl sys_keyctl
-288 common ioprio_set sys_ioprio_set
-289 common ioprio_get sys_ioprio_get
-290 common inotify_init sys_inotify_init
-291 common inotify_add_watch sys_inotify_add_watch
-292 common inotify_rm_watch sys_inotify_rm_watch
-# 293 is unused
-294 common migrate_pages sys_migrate_pages
-295 common openat sys_openat
-296 common mkdirat sys_mkdirat
-297 common mknodat sys_mknodat
-298 common fchownat sys_fchownat
-299 common futimesat sys_futimesat_time32
-300 common fstatat64 sys_fstatat64
-301 common unlinkat sys_unlinkat
-302 common renameat sys_renameat
-303 common linkat sys_linkat
-304 common symlinkat sys_symlinkat
-305 common readlinkat sys_readlinkat
-306 common fchmodat sys_fchmodat
-307 common faccessat sys_faccessat
-308 common pselect6 sys_pselect6_time32
-309 common ppoll sys_ppoll_time32
-310 common unshare sys_unshare
-311 common set_robust_list sys_set_robust_list
-312 common get_robust_list sys_get_robust_list
-313 common splice sys_splice
-314 common sync_file_range sys_sync_file_range
-315 common tee sys_tee
-316 common vmsplice sys_vmsplice
-317 common move_pages sys_move_pages
-318 common getcpu sys_getcpu
-319 common epoll_pwait sys_epoll_pwait
-320 common utimensat sys_utimensat_time32
-321 common signalfd sys_signalfd
-322 common timerfd_create sys_timerfd_create
-323 common eventfd sys_eventfd
-324 common fallocate sys_fallocate
-325 common timerfd_settime sys_timerfd_settime32
-326 common timerfd_gettime sys_timerfd_gettime32
-327 common signalfd4 sys_signalfd4
-328 common eventfd2 sys_eventfd2
-329 common epoll_create1 sys_epoll_create1
-330 common dup3 sys_dup3
-331 common pipe2 sys_pipe2
-332 common inotify_init1 sys_inotify_init1
-333 common preadv sys_preadv
-334 common pwritev sys_pwritev
-335 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
-336 common perf_event_open sys_perf_event_open
-337 common fanotify_init sys_fanotify_init
-338 common fanotify_mark sys_fanotify_mark
-339 common prlimit64 sys_prlimit64
-340 common socket sys_socket
-341 common bind sys_bind
-342 common connect sys_connect
-343 common listen sys_listen
-344 common accept sys_accept
-345 common getsockname sys_getsockname
-346 common getpeername sys_getpeername
-347 common socketpair sys_socketpair
-348 common send sys_send
-349 common sendto sys_sendto
-350 common recv sys_recv
-351 common recvfrom sys_recvfrom
-352 common shutdown sys_shutdown
-353 common setsockopt sys_setsockopt
-354 common getsockopt sys_getsockopt
-355 common sendmsg sys_sendmsg
-356 common recvmsg sys_recvmsg
-357 common recvmmsg sys_recvmmsg_time32
-358 common accept4 sys_accept4
-359 common name_to_handle_at sys_name_to_handle_at
-360 common open_by_handle_at sys_open_by_handle_at
-361 common clock_adjtime sys_clock_adjtime32
-362 common syncfs sys_syncfs
-363 common sendmmsg sys_sendmmsg
-364 common setns sys_setns
-365 common process_vm_readv sys_process_vm_readv
-366 common process_vm_writev sys_process_vm_writev
-367 common kcmp sys_kcmp
-368 common finit_module sys_finit_module
-369 common sched_getattr sys_sched_getattr
-370 common sched_setattr sys_sched_setattr
-371 common renameat2 sys_renameat2
-372 common seccomp sys_seccomp
-373 common getrandom sys_getrandom
-374 common memfd_create sys_memfd_create
-375 common bpf sys_bpf
-376 common execveat sys_execveat
-377 common userfaultfd sys_userfaultfd
-378 common membarrier sys_membarrier
-379 common mlock2 sys_mlock2
-380 common copy_file_range sys_copy_file_range
-381 common preadv2 sys_preadv2
-382 common pwritev2 sys_pwritev2
-383 common statx sys_statx
-384 common pkey_mprotect sys_pkey_mprotect
-385 common pkey_alloc sys_pkey_alloc
-386 common pkey_free sys_pkey_free
-387 common rseq sys_rseq
-# room for arch specific syscalls
-393 common semget sys_semget
-394 common semctl sys_semctl
-395 common shmget sys_shmget
-396 common shmctl sys_shmctl
-397 common shmat sys_shmat
-398 common shmdt sys_shmdt
-399 common msgget sys_msgget
-400 common msgsnd sys_msgsnd
-401 common msgrcv sys_msgrcv
-402 common msgctl sys_msgctl
-403 common clock_gettime64 sys_clock_gettime
-404 common clock_settime64 sys_clock_settime
-405 common clock_adjtime64 sys_clock_adjtime
-406 common clock_getres_time64 sys_clock_getres
-407 common clock_nanosleep_time64 sys_clock_nanosleep
-408 common timer_gettime64 sys_timer_gettime
-409 common timer_settime64 sys_timer_settime
-410 common timerfd_gettime64 sys_timerfd_gettime
-411 common timerfd_settime64 sys_timerfd_settime
-412 common utimensat_time64 sys_utimensat
-413 common pselect6_time64 sys_pselect6
-414 common ppoll_time64 sys_ppoll
-416 common io_pgetevents_time64 sys_io_pgetevents
-417 common recvmmsg_time64 sys_recvmmsg
-418 common mq_timedsend_time64 sys_mq_timedsend
-419 common mq_timedreceive_time64 sys_mq_timedreceive
-420 common semtimedop_time64 sys_semtimedop
-421 common rt_sigtimedwait_time64 sys_rt_sigtimedwait
-422 common futex_time64 sys_futex
-423 common sched_rr_get_interval_time64 sys_sched_rr_get_interval
-424 common pidfd_send_signal sys_pidfd_send_signal
-425 common io_uring_setup sys_io_uring_setup
-426 common io_uring_enter sys_io_uring_enter
-427 common io_uring_register sys_io_uring_register
-428 common open_tree sys_open_tree
-429 common move_mount sys_move_mount
-430 common fsopen sys_fsopen
-431 common fsconfig sys_fsconfig
-432 common fsmount sys_fsmount
-433 common fspick sys_fspick
-434 common pidfd_open sys_pidfd_open
-# 435 reserved for clone3
-436 common close_range sys_close_range
-437 common openat2 sys_openat2
-438 common pidfd_getfd sys_pidfd_getfd
-439 common faccessat2 sys_faccessat2
-440 common process_madvise sys_process_madvise
-441 common epoll_pwait2 sys_epoll_pwait2
-442 common mount_setattr sys_mount_setattr
-443 common quotactl_fd sys_quotactl_fd
-444 common landlock_create_ruleset sys_landlock_create_ruleset
-445 common landlock_add_rule sys_landlock_add_rule
-446 common landlock_restrict_self sys_landlock_restrict_self
-# 447 reserved for memfd_secret
-448 common process_mrelease sys_process_mrelease
-449 common futex_waitv sys_futex_waitv
-450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
deleted file mode 100644
index bd1a9c54476732..00000000000000
--- a/arch/sh/kernel/syscalls_32.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/syscalls.S
- *
- * System call table for SuperH
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#define __SYSCALL(nr, entry) .long entry
- .data
-ENTRY(sys_call_table)
-#include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
deleted file mode 100644
index 821a09cbd6054f..00000000000000
--- a/arch/sh/kernel/time.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/smp.h>
-#include <linux/rtc.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-static void __init sh_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- sh_early_platform_driver_register_all("earlytimer");
- sh_early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init time_init(void)
-{
- timer_probe();
-
- clk_init();
-
- late_time_init = sh_late_time_init;
-}
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
deleted file mode 100644
index 2d2a7509b565ac..00000000000000
--- a/arch/sh/kernel/topology.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/topology.c
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/percpu.h>
-#include <linux/topology.h>
-#include <linux/node.h>
-#include <linux/nodemask.h>
-#include <linux/export.h>
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-cpumask_t cpu_core_map[NR_CPUS];
-EXPORT_SYMBOL(cpu_core_map);
-
-static cpumask_t cpu_coregroup_map(int cpu)
-{
- /*
- * Presently all SH-X3 SMP cores are multi-cores, so just keep it
- * simple until we have a method for determining topology..
- */
- return *cpu_possible_mask;
-}
-
-const struct cpumask *cpu_coregroup_mask(int cpu)
-{
- return &cpu_core_map[cpu];
-}
-
-int arch_update_cpu_topology(void)
-{
- unsigned int cpu;
-
- for_each_possible_cpu(cpu)
- cpu_core_map[cpu] = cpu_coregroup_map(cpu);
-
- return 0;
-}
-
-static int __init topology_init(void)
-{
- int i, ret;
-
- for_each_present_cpu(i) {
- struct cpu *c = &per_cpu(cpu_devices, i);
-
- c->hotpluggable = 1;
-
- ret = register_cpu(c, i);
- if (unlikely(ret))
- printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
- __func__, i, ret);
- }
-
-#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
- /*
- * In the UP case, make sure the CPU association is still
- * registered under each node. Without this, sysfs fails
- * to make the connection between nodes other than node0
- * and cpu0.
- */
- for_each_online_node(i)
- if (i != numa_node_id())
- register_cpu_under_node(raw_smp_processor_id(), i);
-#endif
-
- return 0;
-}
-subsys_initcall(topology_init);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
deleted file mode 100644
index 01884054aeb2bd..00000000000000
--- a/arch/sh/kernel/traps.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/kdebug.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-#include <linux/kernel.h>
-#include <linux/kexec.h>
-#include <linux/sched/signal.h>
-
-#include <linux/extable.h>
-#include <linux/module.h> /* print_modules */
-#include <asm/unwinder.h>
-#include <asm/traps.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-void __noreturn die(const char *str, struct pt_regs *regs, long err)
-{
- static int die_counter;
-
- oops_enter();
-
- spin_lock_irq(&die_lock);
- console_verbose();
- bust_spinlocks(1);
-
- printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- print_modules();
- show_regs(regs);
-
- printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
- task_pid_nr(current), task_stack_page(current) + 1);
-
- if (!user_mode(regs) || in_interrupt())
- dump_mem("Stack: ", KERN_DEFAULT, regs->regs[15],
- THREAD_SIZE + (unsigned long)task_stack_page(current));
-
- notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
-
- bust_spinlocks(0);
- add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- spin_unlock_irq(&die_lock);
- oops_exit();
-
- if (kexec_should_crash(current))
- crash_kexec(regs);
-
- if (in_interrupt())
- panic("Fatal exception in interrupt");
-
- if (panic_on_oops)
- panic("Fatal exception");
-
- make_task_dead(SIGSEGV);
-}
-
-void die_if_kernel(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs))
- die(str, regs, err);
-}
-
-/*
- * try and fix up kernelspace address errors
- * - userspace errors just cause EFAULT to be returned, resulting in SEGV
- * - kernel/userspace interfaces cause a jump to an appropriate handler
- * - other kernel errors are bad
- */
-void die_if_no_fixup(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs)) {
- const struct exception_table_entry *fixup;
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return;
- }
-
- die(str, regs, err);
- }
-}
-
-#ifdef CONFIG_GENERIC_BUG
-static void handle_BUG(struct pt_regs *regs)
-{
- const struct bug_entry *bug;
- unsigned long bugaddr = regs->pc;
- enum bug_trap_type tt;
-
- if (!is_valid_bugaddr(bugaddr))
- goto invalid;
-
- bug = find_bug(bugaddr);
-
- /* Switch unwinders when unwind_stack() is called */
- if (bug->flags & BUGFLAG_UNWINDER)
- unwinder_faulted = 1;
-
- tt = report_bug(bugaddr, regs);
- if (tt == BUG_TRAP_TYPE_WARN) {
- regs->pc += instruction_size(bugaddr);
- return;
- }
-
-invalid:
- die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
- insn_size_t opcode;
-
- if (addr < PAGE_OFFSET)
- return 0;
- if (get_kernel_nofault(opcode, (insn_size_t *)addr))
- return 0;
- if (opcode == TRAPA_BUG_OPCODE)
- return 1;
-
- return 0;
-}
-#endif
-
-/*
- * Generic trap handler.
- */
-BUILD_TRAP_HANDLER(debug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
- force_sig(SIGTRAP);
-}
-
-/*
- * Special handler for BUG() traps.
- */
-BUILD_TRAP_HANDLER(bug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
-#ifdef CONFIG_GENERIC_BUG
- if (__kernel_text_address(instruction_pointer(regs))) {
- insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
- if (insn == TRAPA_BUG_OPCODE)
- handle_BUG(regs);
- return;
- }
-#endif
-
- force_sig(SIGTRAP);
-}
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void arch_ftrace_nmi_enter(void);
-extern void arch_ftrace_nmi_exit(void);
-#else
-static inline void arch_ftrace_nmi_enter(void) { }
-static inline void arch_ftrace_nmi_exit(void) { }
-#endif
-
-BUILD_TRAP_HANDLER(nmi)
-{
- TRAP_HANDLER_DECL;
-
- arch_ftrace_nmi_enter();
-
- nmi_enter();
- this_cpu_inc(irq_stat.__nmi_count);
-
- switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
- case NOTIFY_OK:
- case NOTIFY_STOP:
- break;
- case NOTIFY_BAD:
- die("Fatal Non-Maskable Interrupt", regs, SIGINT);
- default:
- printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
- break;
- }
-
- nmi_exit();
-
- arch_ftrace_nmi_exit();
-}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
deleted file mode 100644
index 6cdda3a621a1e5..00000000000000
--- a/arch/sh/kernel/traps_32.c
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * 'traps.c' handles hardware traps and faults after we have saved some
- * state in 'entry.S'.
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf
- * Copyright (C) 2000 David Howells
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/kallsyms.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-#include <linux/debug_locks.h>
-#include <linux/kdebug.h>
-#include <linux/limits.h>
-#include <linux/sysfs.h>
-#include <linux/uaccess.h>
-#include <linux/perf_event.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/alignment.h>
-#include <asm/fpu.h>
-#include <asm/kprobes.h>
-#include <asm/traps.h>
-#include <asm/bl_bit.h>
-
-#ifdef CONFIG_CPU_SH2
-# define TRAP_RESERVED_INST 4
-# define TRAP_ILLEGAL_SLOT_INST 6
-# define TRAP_ADDRESS_ERROR 9
-# ifdef CONFIG_CPU_SH2A
-# define TRAP_UBC 12
-# define TRAP_FPU_ERROR 13
-# define TRAP_DIVZERO_ERROR 17
-# define TRAP_DIVOVF_ERROR 18
-# endif
-#else
-#define TRAP_RESERVED_INST 12
-#define TRAP_ILLEGAL_SLOT_INST 13
-#endif
-
-static inline void sign_extend(unsigned int count, unsigned char *dst)
-{
-#ifdef __LITTLE_ENDIAN__
- if ((count == 1) && dst[0] & 0x80) {
- dst[1] = 0xff;
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
- if ((count == 2) && dst[1] & 0x80) {
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
-#else
- if ((count == 1) && dst[3] & 0x80) {
- dst[2] = 0xff;
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
- if ((count == 2) && dst[2] & 0x80) {
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
-#endif
-}
-
-static struct mem_access user_mem_access = {
- copy_from_user,
- copy_to_user,
-};
-
-static unsigned long copy_from_kernel_wrapper(void *dst, const void __user *src,
- unsigned long cnt)
-{
- return copy_from_kernel_nofault(dst, (const void __force *)src, cnt);
-}
-
-static unsigned long copy_to_kernel_wrapper(void __user *dst, const void *src,
- unsigned long cnt)
-{
- return copy_to_kernel_nofault((void __force *)dst, src, cnt);
-}
-
-static struct mem_access kernel_mem_access = {
- copy_from_kernel_wrapper,
- copy_to_kernel_wrapper,
-};
-
-/*
- * handle an instruction that does an unaligned memory access by emulating the
- * desired behaviour
- * - note that PC _may not_ point to the faulting instruction
- * (if that instruction is in a branch delay slot)
- * - return 0 if emulation okay, -EFAULT on existential error
- */
-static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma)
-{
- int ret, index, count;
- unsigned long *rm, *rn;
- unsigned char *src, *dst;
- unsigned char __user *srcu, *dstu;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rn = ®s->regs[index];
-
- index = (instruction>>4)&15; /* 0x00F0 */
- rm = ®s->regs[index];
-
- count = 1<<(instruction&3);
-
- switch (count) {
- case 1: inc_unaligned_byte_access(); break;
- case 2: inc_unaligned_word_access(); break;
- case 4: inc_unaligned_dword_access(); break;
- case 8: inc_unaligned_multi_access(); break;
- }
-
- ret = -EFAULT;
- switch (instruction>>12) {
- case 0: /* mov.[bwl] to/from memory via r0+rn */
- if (instruction & 8) {
- /* from memory */
- srcu = (unsigned char __user *)*rm;
- srcu += regs->regs[0];
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
-
- sign_extend(count, dst);
- } else {
- /* to memory */
- src = (unsigned char *)rm;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- dstu = (unsigned char __user *)*rn;
- dstu += regs->regs[0];
-
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- }
- ret = 0;
- break;
-
- case 1: /* mov.l Rm,@(disp,Rn) */
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
- dstu += (instruction&0x000F)<<2;
-
- if (ma->to(dstu, src, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 2: /* mov.[bwl] to memory, possibly with pre-decrement */
- if (instruction & 4)
- *rn -= count;
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 5: /* mov.l @(disp,Rm),Rn */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 6: /* mov.[bwl] from memory, possibly with post-increment */
- srcu = (unsigned char __user *)*rm;
- if (instruction & 4)
- *rm += count;
- dst = (unsigned char*) rn;
- *(unsigned long*)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
- sign_extend(count, dst);
- ret = 0;
- break;
-
- case 8:
- switch ((instruction&0xFF00)>>8) {
- case 0x81: /* mov.w R0,@(disp,Rn) */
- src = (unsigned char *) ®s->regs[0];
-#if !defined(__LITTLE_ENDIAN__)
- src += 2;
-#endif
- dstu = (unsigned char __user *)*rm; /* called Rn in the spec */
- dstu += (instruction & 0x000F) << 1;
-
- if (ma->to(dstu, src, 2))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 0x85: /* mov.w @(disp,Rm),R0 */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 1;
- dst = (unsigned char *) ®s->regs[0];
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
- }
- break;
-
- case 9: /* mov.w @(disp,PC),Rn */
- srcu = (unsigned char __user *)regs->pc;
- srcu += 4;
- srcu += (instruction & 0x00FF) << 1;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
-
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
-
- case 0xd: /* mov.l @(disp,PC),Rn */
- srcu = (unsigned char __user *)(regs->pc & ~0x3);
- srcu += 4;
- srcu += (instruction & 0x00FF) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
- }
- return ret;
-
- fetch_fault:
- /* Argh. Address not only misaligned but also non-existent.
- * Raise an EFAULT and see if it's trapped
- */
- die_if_no_fixup("Fault in unaligned fixup", regs, 0);
- return -EFAULT;
-}
-
-/*
- * emulate the instruction in the delay slot
- * - fetches the instruction from PC+2
- */
-static inline int handle_delayslot(struct pt_regs *regs,
- insn_size_t old_instruction,
- struct mem_access *ma)
-{
- insn_size_t instruction;
- void __user *addr = (void __user *)(regs->pc +
- instruction_size(old_instruction));
-
- if (copy_from_user(&instruction, addr, sizeof(instruction))) {
- /* the instruction-fetch faulted */
- if (user_mode(regs))
- return -EFAULT;
-
- /* kernel */
- die("delay-slot-insn faulting in handle_unaligned_delayslot",
- regs, 0);
- }
-
- return handle_unaligned_ins(instruction, regs, ma);
-}
-
-/*
- * handle an instruction that does an unaligned memory access
- * - have to be careful of branch delay-slot instructions that fault
- * SH3:
- * - if the branch would be taken PC points to the branch
- * - if the branch would not be taken, PC points to delay-slot
- * SH4:
- * - PC always points to delayed branch
- * - return 0 if handled, -EFAULT if failed (may not return if in kernel)
- */
-
-/* Macros to determine offset from current PC for branch instructions */
-/* Explicit type coercion is used to force sign extension where needed */
-#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
-#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int expected,
- unsigned long address)
-{
- u_int rm;
- int ret, index;
-
- /*
- * XXX: We can't handle mixed 16/32-bit instructions yet
- */
- if (instruction_size(instruction) != 2)
- return -EINVAL;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rm = regs->regs[index];
-
- /*
- * Log the unexpected fixups, and then pass them on to perf.
- *
- * We intentionally don't report the expected cases to perf as
- * otherwise the trapped I/O case will skew the results too much
- * to be useful.
- */
- if (!expected) {
- unaligned_fixups_notify(current, instruction, regs);
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1,
- regs, address);
- }
-
- ret = -EFAULT;
- switch (instruction&0xF000) {
- case 0x0000:
- if (instruction==0x000B) {
- /* rts */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = regs->pr;
- }
- else if ((instruction&0x00FF)==0x0023) {
- /* braf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += rm + 4;
- }
- else if ((instruction&0x00FF)==0x0003) {
- /* bsrf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += rm + 4;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x1000: /* mov.l Rm,@(disp,Rn) */
- goto simple;
-
- case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */
- goto simple;
-
- case 0x4000:
- if ((instruction&0x00FF)==0x002B) {
- /* jmp @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = rm;
- }
- else if ((instruction&0x00FF)==0x000B) {
- /* jsr @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc = rm;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x5000: /* mov.l @(disp,Rm),Rn */
- goto simple;
-
- case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */
- goto simple;
-
- case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */
- switch (instruction&0x0F00) {
- case 0x0100: /* mov.w R0,@(disp,Rm) */
- goto simple;
- case 0x0500: /* mov.w @(disp,Rm),R0 */
- goto simple;
- case 0x0B00: /* bf lab - no delayslot*/
- ret = 0;
- break;
- case 0x0F00: /* bf/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) != 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- case 0x0900: /* bt lab - no delayslot */
- ret = 0;
- break;
- case 0x0D00: /* bt/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) == 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- }
- break;
-
- case 0x9000: /* mov.w @(disp,Rm),Rn */
- goto simple;
-
- case 0xA000: /* bra label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- break;
-
- case 0xB000: /* bsr label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- }
- break;
-
- case 0xD000: /* mov.l @(disp,Rm),Rn */
- goto simple;
- }
- return ret;
-
- /* handle non-delay-slot instruction */
- simple:
- ret = handle_unaligned_ins(instruction, regs, ma);
- if (ret==0)
- regs->pc += instruction_size(instruction);
- return ret;
-}
-
-/*
- * Handle various address error exceptions:
- * - instruction address error:
- * misaligned PC
- * PC >= 0x80000000 in user mode
- * - data address error (read and write)
- * misaligned data access
- * access to >= 0x80000000 is user mode
- * Unfortuntaly we can't distinguish between instruction address error
- * and data address errors caused by read accesses.
- */
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
- unsigned long error_code = 0;
- insn_size_t instruction;
- int tmp;
-
- /* Intentional ifdef */
-#ifdef CONFIG_CPU_HAS_SR_RB
- error_code = lookup_exception_vector();
-#endif
-
- if (user_mode(regs)) {
- int si_code = BUS_ADRERR;
- unsigned int user_action;
-
- local_irq_enable();
- inc_unaligned_user_access();
-
- if (copy_from_user(&instruction, (insn_size_t __user *)(regs->pc & ~1),
- sizeof(instruction))) {
- goto uspace_segv;
- }
-
- /* shout about userspace fixups */
- unaligned_fixups_notify(current, instruction, regs);
-
- user_action = unaligned_user_action();
- if (user_action & UM_FIXUP)
- goto fixup;
- if (user_action & UM_SIGNAL)
- goto uspace_segv;
- else {
- /* ignore */
- regs->pc += instruction_size(instruction);
- return;
- }
-
-fixup:
- /* bad PC is not something we can fix */
- if (regs->pc & 1) {
- si_code = BUS_ADRALN;
- goto uspace_segv;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &user_mem_access, 0,
- address);
-
- if (tmp == 0)
- return; /* sorted */
-uspace_segv:
- printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
- "access (PC %lx PR %lx)\n", current->comm, regs->pc,
- regs->pr);
-
- force_sig_fault(SIGBUS, si_code, (void __user *)address);
- } else {
- inc_unaligned_kernel_access();
-
- if (regs->pc & 1)
- die("unaligned program counter", regs, error_code);
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- /* Argh. Fault on the instruction itself.
- This should never happen non-SMP
- */
- die("insn faulting in do_address_error", regs, 0);
- }
-
- unaligned_fixups_notify(current, instruction, regs);
-
- handle_unaligned_access(instruction, regs, &kernel_mem_access,
- 0, address);
- }
-}
-
-#ifdef CONFIG_SH_DSP
-/*
- * SH-DSP support gerg@snapgear.com.
- */
-int is_dsp_inst(struct pt_regs *regs)
-{
- unsigned short inst = 0;
-
- /*
- * Safe guard if DSP mode is already enabled or we're lacking
- * the DSP altogether.
- */
- if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP))
- return 0;
-
- get_user(inst, ((unsigned short *) regs->pc));
-
- inst &= 0xf000;
-
- /* Check for any type of DSP or support instruction */
- if ((inst == 0xf000) || (inst == 0x4000))
- return 1;
-
- return 0;
-}
-#else
-#define is_dsp_inst(regs) (0)
-#endif /* CONFIG_SH_DSP */
-
-#ifdef CONFIG_CPU_SH2A
-asmlinkage void do_divide_error(unsigned long r4)
-{
- int code;
-
- switch (r4) {
- case TRAP_DIVZERO_ERROR:
- code = FPE_INTDIV;
- break;
- case TRAP_DIVOVF_ERROR:
- code = FPE_INTOVF;
- break;
- default:
- /* Let gcc know unhandled cases don't make it past here */
- return;
- }
- force_sig_fault(SIGFPE, code, NULL);
-}
-#endif
-
-asmlinkage void do_reserved_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long error_code;
-
-#ifdef CONFIG_SH_FPU_EMU
- unsigned short inst = 0;
- int err;
-
- get_user(inst, (unsigned short __user *)regs->pc);
-
- err = do_fpu_inst(inst, regs);
- if (!err) {
- regs->pc += instruction_size(inst);
- return;
- }
- /* not a FPU inst. */
-#endif
-
-#ifdef CONFIG_SH_DSP
- /* Check if it's a DSP instruction */
- if (is_dsp_inst(regs)) {
- /* Enable DSP mode, and restart instruction. */
- regs->sr |= SR_DSP;
- /* Save DSP mode */
- current->thread.dsp_status.status |= SR_DSP;
- return;
- }
-#endif
-
- error_code = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("reserved instruction", regs, error_code);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-static int emulate_branch(unsigned short inst, struct pt_regs *regs)
-{
- /*
- * bfs: 8fxx: PC+=d*2+4;
- * bts: 8dxx: PC+=d*2+4;
- * bra: axxx: PC+=D*2+4;
- * bsr: bxxx: PC+=D*2+4 after PR=PC+4;
- * braf:0x23: PC+=Rn*2+4;
- * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
- * jmp: 4x2b: PC=Rn;
- * jsr: 4x0b: PC=Rn after PR=PC+4;
- * rts: 000b: PC=PR;
- */
- if (((inst & 0xf000) == 0xb000) || /* bsr */
- ((inst & 0xf0ff) == 0x0003) || /* bsrf */
- ((inst & 0xf0ff) == 0x400b)) /* jsr */
- regs->pr = regs->pc + 4;
-
- if ((inst & 0xfd00) == 0x8d00) { /* bfs, bts */
- regs->pc += SH_PC_8BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xe000) == 0xa000) { /* bra, bsr */
- regs->pc += SH_PC_12BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x0003) { /* braf, bsrf */
- regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x400b) { /* jmp, jsr */
- regs->pc = regs->regs[(inst & 0x0f00) >> 8];
- return 0;
- }
-
- if ((inst & 0xffff) == 0x000b) { /* rts */
- regs->pc = regs->pr;
- return 0;
- }
-
- return 1;
-}
-#endif
-
-asmlinkage void do_illegal_slot_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long inst;
-
- if (kprobe_handle_illslot(regs->pc) == 0)
- return;
-
-#ifdef CONFIG_SH_FPU_EMU
- get_user(inst, (unsigned short __user *)regs->pc + 1);
- if (!do_fpu_inst(inst, regs)) {
- get_user(inst, (unsigned short __user *)regs->pc);
- if (!emulate_branch(inst, regs))
- return;
- /* fault in branch.*/
- }
- /* not a FPU inst. */
-#endif
-
- inst = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("illegal slot instruction", regs, inst);
-}
-
-asmlinkage void do_exception_error(void)
-{
- long ex;
-
- ex = lookup_exception_vector();
- die_if_kernel("exception", current_pt_regs(), ex);
-}
-
-void per_cpu_trap_init(void)
-{
- extern void *vbr_base;
-
- /* NOTE: The VBR value should be at P1
- (or P2, virtural "fixed" address space).
- It's definitely should not in physical address. */
-
- asm volatile("ldc %0, vbr"
- : /* no output */
- : "r" (&vbr_base)
- : "memory");
-
- /* disable exception blocking now when the vbr has been setup */
- clear_bl_bit();
-}
-
-void *set_exception_table_vec(unsigned int vec, void *handler)
-{
- extern void *exception_handling_table[];
- void *old_handler;
-
- old_handler = exception_handling_table[vec];
- exception_handling_table[vec] = handler;
- return old_handler;
-}
-
-void __init trap_init(void)
-{
- set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst);
- set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
- defined(CONFIG_SH_FPU_EMU)
- /*
- * For SH-4 lacking an FPU, treat floating point instructions as
- * reserved. They'll be handled in the math-emu case, or faulted on
- * otherwise.
- */
- set_exception_table_evt(0x800, do_reserved_inst);
- set_exception_table_evt(0x820, do_illegal_slot_inst);
-#elif defined(CONFIG_SH_FPU)
- set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
- set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
-#endif
-
-#ifdef CONFIG_CPU_SH2
- set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
-#endif
-#ifdef CONFIG_CPU_SH2A
- set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
- set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
-#ifdef CONFIG_SH_FPU
- set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
-#endif
-#endif
-
-#ifdef TRAP_UBC
- set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
-#endif
-}
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
deleted file mode 100644
index 7a54b72dd92377..00000000000000
--- a/arch/sh/kernel/unwinder.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based, in part, on kernel/time/clocksource.c.
- *
- * This file provides arbitration code for stack unwinders.
- *
- * Multiple stack unwinders can be available on a system, usually with
- * the most accurate unwinder being the currently active one.
- */
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <linux/atomic.h>
-
-/*
- * This is the most basic stack unwinder an architecture can
- * provide. For architectures without reliable frame pointers, e.g.
- * RISC CPUs, it can be implemented by looking through the stack for
- * addresses that lie within the kernel text section.
- *
- * Other CPUs, e.g. x86, can use their frame pointer register to
- * construct more accurate stack traces.
- */
-static struct list_head unwinder_list;
-static struct unwinder stack_reader = {
- .name = "stack-reader",
- .dump = stack_reader_dump,
- .rating = 50,
- .list = {
- .next = &unwinder_list,
- .prev = &unwinder_list,
- },
-};
-
-/*
- * "curr_unwinder" points to the stack unwinder currently in use. This
- * is the unwinder with the highest rating.
- *
- * "unwinder_list" is a linked-list of all available unwinders, sorted
- * by rating.
- *
- * All modifications of "curr_unwinder" and "unwinder_list" must be
- * performed whilst holding "unwinder_lock".
- */
-static struct unwinder *curr_unwinder = &stack_reader;
-
-static struct list_head unwinder_list = {
- .next = &stack_reader.list,
- .prev = &stack_reader.list,
-};
-
-static DEFINE_SPINLOCK(unwinder_lock);
-
-/**
- * select_unwinder - Select the best registered stack unwinder.
- *
- * Private function. Must hold unwinder_lock when called.
- *
- * Select the stack unwinder with the best rating. This is useful for
- * setting up curr_unwinder.
- */
-static struct unwinder *select_unwinder(void)
-{
- struct unwinder *best;
-
- if (list_empty(&unwinder_list))
- return NULL;
-
- best = list_entry(unwinder_list.next, struct unwinder, list);
- if (best == curr_unwinder)
- return NULL;
-
- return best;
-}
-
-/*
- * Enqueue the stack unwinder sorted by rating.
- */
-static int unwinder_enqueue(struct unwinder *ops)
-{
- struct list_head *tmp, *entry = &unwinder_list;
-
- list_for_each(tmp, &unwinder_list) {
- struct unwinder *o;
-
- o = list_entry(tmp, struct unwinder, list);
- if (o == ops)
- return -EBUSY;
- /* Keep track of the place, where to insert */
- if (o->rating >= ops->rating)
- entry = tmp;
- }
- list_add(&ops->list, entry);
-
- return 0;
-}
-
-/**
- * unwinder_register - Used to install new stack unwinder
- * @u: unwinder to be registered
- *
- * Install the new stack unwinder on the unwinder list, which is sorted
- * by rating.
- *
- * Returns -EBUSY if registration fails, zero otherwise.
- */
-int unwinder_register(struct unwinder *u)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&unwinder_lock, flags);
- ret = unwinder_enqueue(u);
- if (!ret)
- curr_unwinder = select_unwinder();
- spin_unlock_irqrestore(&unwinder_lock, flags);
-
- return ret;
-}
-
-int unwinder_faulted = 0;
-
-/*
- * Unwind the call stack and pass information to the stacktrace_ops
- * functions. Also handle the case where we need to switch to a new
- * stack dumper because the current one faulted unexpectedly.
- */
-void unwind_stack(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- unsigned long flags;
-
- /*
- * The problem with unwinders with high ratings is that they are
- * inherently more complicated than the simple ones with lower
- * ratings. We are therefore more likely to fault in the
- * complicated ones, e.g. hitting BUG()s. If we fault in the
- * code for the current stack unwinder we try to downgrade to
- * one with a lower rating.
- *
- * Hopefully this will give us a semi-reliable stacktrace so we
- * can diagnose why curr_unwinder->dump() faulted.
- */
- if (unwinder_faulted) {
- spin_lock_irqsave(&unwinder_lock, flags);
-
- /* Make sure no one beat us to changing the unwinder */
- if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
- list_del(&curr_unwinder->list);
- curr_unwinder = select_unwinder();
-
- unwinder_faulted = 0;
- }
-
- spin_unlock_irqrestore(&unwinder_lock, flags);
- }
-
- curr_unwinder->dump(task, regs, sp, ops, data);
-}
-EXPORT_SYMBOL_GPL(unwind_stack);
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
deleted file mode 100644
index 3161b9ccd2a570..00000000000000
--- a/arch/sh/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ld script to make SuperH Linux kernel
- * Written by Niibe Yutaka and Paul Mundt
- */
-OUTPUT_ARCH(sh)
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm/vmlinux.lds.h>
-
-#ifdef CONFIG_PMB
- #define MEMORY_OFFSET 0
-#else
- #define MEMORY_OFFSET __MEMORY_START
-#endif
-
-ENTRY(_start)
-SECTIONS
-{
- . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-
- _text = .; /* Text and read-only data */
-
- .empty_zero_page : AT(ADDR(.empty_zero_page)) {
- *(.empty_zero_page)
- } = 0
-
- .text : AT(ADDR(.text)) {
- HEAD_TEXT
- TEXT_TEXT
- SCHED_TEXT
- CPUIDLE_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- SOFTIRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } = 0x0009
-
- EXCEPTION_TABLE(16)
-
- _sdata = .;
- RO_DATA(PAGE_SIZE)
- RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
- _edata = .;
-
- DWARF_EH_FRAME
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- INIT_TEXT_SECTION(PAGE_SIZE)
- INIT_DATA_SECTION(16)
-
- . = ALIGN(4);
- .machvec.init : AT(ADDR(.machvec.init)) {
- __machvec_start = .;
- *(.machvec.init)
- __machvec_end = .;
- }
-
- PERCPU_SECTION(L1_CACHE_BYTES)
-
- /*
- * .exit.text is discarded at runtime, not link time, to deal with
- * references from __bug_table
- */
- .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
- .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
- BSS_SECTION(0, PAGE_SIZE, 4)
- _end = . ;
-
- STABS_DEBUG
- DWARF_DEBUG
- ELF_DETAILS
-
- DISCARDS
-}
diff --git a/arch/sh/kernel/vsyscall/.gitignore b/arch/sh/kernel/vsyscall/.gitignore
deleted file mode 100644
index 530a3031a88d79..00000000000000
--- a/arch/sh/kernel/vsyscall/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vsyscall.lds
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
deleted file mode 100644
index 6e86644480488f..00000000000000
--- a/arch/sh/kernel/vsyscall/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += vsyscall.o vsyscall-syscall.o vsyscall-syms.o
-
-$(obj)/vsyscall-syscall.o: \
- $(foreach F,trapa,$(obj)/vsyscall-$F.so)
-
-# Teach kbuild about targets
-targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note.o vsyscall.lds vsyscall-dummy.o
-
-# The DSO images are built using a special linker script
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall.lds += -P -C -Ush
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 -Wl,--hash-style=sysv
-
-SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
-
-$(obj)/vsyscall-trapa.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
- $(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-SYSCFLAGS_vsyscall-dummy.o = -r
-$(obj)/vsyscall-dummy.o: $(src)/vsyscall.lds \
- $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-LDFLAGS_vsyscall-syms.o := -r -R
-$(obj)/vsyscall-syms.o: $(obj)/vsyscall-dummy.o FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S
deleted file mode 100644
index bb350918bebd19..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-note.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
- * Here we can supply some information useful to userland.
- */
-
-#include <linux/uts.h>
-#include <linux/version.h>
-
-#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \
- .section name, flags; \
- .balign 4; \
- .long 1f - 0f; /* name length */ \
- .long 3f - 2f; /* data length */ \
- .long type; /* note type */ \
-0: .asciz vendor; /* vendor name */ \
-1: .balign 4; \
-2:
-
-#define ASM_ELF_NOTE_END \
-3: .balign 4; /* pad out section */ \
- .previous
-
- ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
- .long LINUX_VERSION_CODE
- ASM_ELF_NOTE_END
diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
deleted file mode 100644
index bece5fa7361830..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd.h>
-
- .text
- .balign 32
- .globl __kernel_sigreturn
- .type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_sigreturn
-.LEND_sigreturn:
- .size __kernel_sigreturn,.-.LSTART_sigreturn
-
- .balign 32
- .globl __kernel_rt_sigreturn
- .type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_rt_sigreturn
-.LEND_rt_sigreturn:
- .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE1:
- .ualong .LCIE1_end - .LCIE1_start
-.LCIE1_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zRS" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc, 0xf, 0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
-
- .align 2
-.LCIE1_end:
-
- .ualong .LFDE0_end-.LFDE0_start /* Length FDE0 */
-.LFDE0_start:
- .ualong .LFDE0_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_sigreturn-. /* PC-relative start address */
- .ualong .LEND_sigreturn-.LSTART_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE0_end:
-
- .ualong .LFDE1_end-.LFDE1_start /* Length FDE1 */
-.LFDE1_start:
- .ualong .LFDE1_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_rt_sigreturn-. /* PC-relative start address */
- .ualong .LEND_rt_sigreturn-.LSTART_rt_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE1_end:
-
- .previous
diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
deleted file mode 100644
index 2aeaa2ddee50eb..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-syscall.S
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/init.h>
-
-__INITDATA
-
- .globl vsyscall_trapa_start, vsyscall_trapa_end
-vsyscall_trapa_start:
- .incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
-vsyscall_trapa_end:
-
-__FINIT
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
deleted file mode 100644
index 854ea323570415..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .text
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- trapa #0x10
- nop
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE:
- .ualong .LCIE_end - .LCIE_start
-.LCIE_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc,0xf,0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
- .align 2
-.LCIE_end:
-
- .ualong .LFDE_end-.LFDE_start /* Length FDE */
-.LFDE_start:
- .ualong .LFDE_start-.LCIE /* CIE pointer */
- .ualong .LSTART_vsyscall-. /* PC-relative start address */
- .ualong .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE_end:
- .previous
-
-/* Get the common code for the sigreturn entry points */
-#include "vsyscall-sigreturn.S"
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
deleted file mode 100644
index 1bd85a6949c45d..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/vsyscall/vsyscall.c
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * vDSO randomization
- * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
- */
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/elf.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-
-/*
- * Should the kernel map a VDSO page into processes and pass its
- * address down to glibc upon exec()?
- */
-unsigned int __read_mostly vdso_enabled = 1;
-EXPORT_SYMBOL_GPL(vdso_enabled);
-
-static int __init vdso_setup(char *s)
-{
- vdso_enabled = simple_strtoul(s, NULL, 0);
- return 1;
-}
-__setup("vdso=", vdso_setup);
-
-/*
- * These symbols are defined by vsyscall.o to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vsyscall_trapa_start, vsyscall_trapa_end;
-static struct page *syscall_pages[1];
-
-int __init vsyscall_init(void)
-{
- void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
- syscall_pages[0] = virt_to_page(syscall_page);
-
- /*
- * XXX: Map this page to a fixmap entry if we get around
- * to adding the page to ELF core dumps
- */
-
- memcpy(syscall_page,
- &vsyscall_trapa_start,
- &vsyscall_trapa_end - &vsyscall_trapa_start);
-
- return 0;
-}
-
-/* Setup a VMA at program startup for the vsyscall page */
-int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
-{
- struct mm_struct *mm = current->mm;
- unsigned long addr;
- int ret;
-
- if (mmap_write_lock_killable(mm))
- return -EINTR;
-
- addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
- if (IS_ERR_VALUE(addr)) {
- ret = addr;
- goto up_fail;
- }
-
- ret = install_special_mapping(mm, addr, PAGE_SIZE,
- VM_READ | VM_EXEC |
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
- syscall_pages);
- if (unlikely(ret))
- goto up_fail;
-
- current->mm->context.vdso = (void *)addr;
-
-up_fail:
- mmap_write_unlock(mm);
- return ret;
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
- if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
- return "[vdso]";
-
- return NULL;
-}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
deleted file mode 100644
index e3582e03c0eb0b..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.lds.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
- * object prelinked to its virtual address, and with only one read-only
- * segment (that fits in one page). This script controls its layout.
- */
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-#else
-OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
-#endif
-OUTPUT_ARCH(sh)
-
-/* The ELF entry point can be used to set the AT_SYSINFO value. */
-ENTRY(__kernel_vsyscall);
-
-SECTIONS
-{
- . = SIZEOF_HEADERS;
-
- .hash : { *(.hash) } :text
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- /*
- * This linker script is used both with -r and with -shared.
- * For the layouts to match, we need to skip more than enough
- * space for the dynamic symbol table et al. If this amount
- * is insufficient, ld -shared will barf. Just increase it here.
- */
- . = 0x400;
-
- .text : { *(.text) } :text =0x90909090
- .note : { *(.note.*) } :text :note
- .eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : {
- KEEP (*(.eh_frame))
- LONG (0)
- } :text
- .dynamic : { *(.dynamic) } :text :dynamic
- .useless : {
- *(.got.plt) *(.got)
- *(.data .data.* .gnu.linkonce.d.*)
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- } :text
-}
-
-/*
- * Very old versions of ld do not recognize this name token; use the constant.
- */
-#define PT_GNU_EH_FRAME 0x6474e550
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
- text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
- dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
- note PT_NOTE FLAGS(4); /* PF_R */
- eh_frame_hdr PT_GNU_EH_FRAME;
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
- LINUX_2.6 {
- global:
- __kernel_vsyscall;
- __kernel_sigreturn;
- __kernel_rt_sigreturn;
-
- local: *;
- };
-}
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
deleted file mode 100644
index eb473d373ca43a..00000000000000
--- a/arch/sh/lib/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for SuperH-specific library files..
-#
-
-lib-y = delay.o memmove.o memchr.o \
- checksum.o strlen.o div64.o div64-generic.o
-
-# Extracted from libgcc
-obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
- ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
- udiv_qrnnd.o
-
-udivsi3-y := udivsi3_i4i-Os.o
-
-ifneq ($(CONFIG_CC_OPTIMIZE_FOR_SIZE),y)
-udivsi3-$(CONFIG_CPU_SH3) := udivsi3_i4i.o
-udivsi3-$(CONFIG_CPU_SH4) := udivsi3_i4i.o
-endif
-udivsi3-y += udivsi3.o
-
-obj-y += io.o
-
-memcpy-y := memcpy.o
-memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o
-
-memset-y := memset.o
-memset-$(CONFIG_CPU_SH4) := memset-sh4.o
-
-lib-$(CONFIG_MMU) += copy_page.o __clear_user.o
-lib-$(CONFIG_MCOUNT) += mcount.o
-lib-y += $(memcpy-y) $(memset-y) $(udivsi3-y)
diff --git a/arch/sh/lib/__clear_user.S b/arch/sh/lib/__clear_user.S
deleted file mode 100644
index 0978606907ed3c..00000000000000
--- a/arch/sh/lib/__clear_user.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * __clear_user_page, __clear_user, clear_page implementation of SuperH
- *
- * Copyright (C) 2001 Kaz Kojima
- * Copyright (C) 2001, 2002 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-ENTRY(__clear_user)
- !
- mov #0, r0
- mov #0xffffffe0, r1
- !
- ! r4..(r4+31)&~32 -------- not aligned [ Area 0 ]
- ! (r4+31)&~32..(r4+r5)&~32 -------- aligned [ Area 1 ]
- ! (r4+r5)&~32..r4+r5 -------- not aligned [ Area 2 ]
- !
- ! Clear area 0
- mov r4, r2
- !
- tst r1, r5 ! length < 32
- bt .Larea2 ! skip to remainder
- !
- add #31, r2
- and r1, r2
- cmp/eq r4, r2
- bt .Larea1
- mov r2, r3
- sub r4, r3
- mov r3, r7
- mov r4, r2
- !
-.L0: dt r3
-0: mov.b r0, @r2
- bf/s .L0
- add #1, r2
- !
- sub r7, r5
- mov r2, r4
-.Larea1:
- mov r4, r3
- add r5, r3
- and r1, r3
- cmp/hi r2, r3
- bf .Larea2
- !
- ! Clear area 1
-#if defined(CONFIG_CPU_SH4)
-1: movca.l r0, @r2
-#else
-1: mov.l r0, @r2
-#endif
- add #4, r2
-2: mov.l r0, @r2
- add #4, r2
-3: mov.l r0, @r2
- add #4, r2
-4: mov.l r0, @r2
- add #4, r2
-5: mov.l r0, @r2
- add #4, r2
-6: mov.l r0, @r2
- add #4, r2
-7: mov.l r0, @r2
- add #4, r2
-8: mov.l r0, @r2
- add #4, r2
- cmp/hi r2, r3
- bt/s 1b
- nop
- !
- ! Clear area 2
-.Larea2:
- mov r4, r3
- add r5, r3
- cmp/hs r3, r2
- bt/s .Ldone
- sub r2, r3
-.L2: dt r3
-9: mov.b r0, @r2
- bf/s .L2
- add #1, r2
- !
-.Ldone: rts
- mov #0, r0 ! return 0 as normal return
-
- ! return the number of bytes remained
-.Lbad_clear_user:
- mov r4, r0
- add r5, r0
- rts
- sub r2, r0
-
-.section __ex_table,"a"
- .align 2
- .long 0b, .Lbad_clear_user
- .long 1b, .Lbad_clear_user
- .long 2b, .Lbad_clear_user
- .long 3b, .Lbad_clear_user
- .long 4b, .Lbad_clear_user
- .long 5b, .Lbad_clear_user
- .long 6b, .Lbad_clear_user
- .long 7b, .Lbad_clear_user
- .long 8b, .Lbad_clear_user
- .long 9b, .Lbad_clear_user
-.previous
diff --git a/arch/sh/lib/ashiftrt.S b/arch/sh/lib/ashiftrt.S
deleted file mode 100644
index 0f7145e3c51ee2..00000000000000
--- a/arch/sh/lib/ashiftrt.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .global __ashiftrt_r4_0
- .global __ashiftrt_r4_1
- .global __ashiftrt_r4_2
- .global __ashiftrt_r4_3
- .global __ashiftrt_r4_4
- .global __ashiftrt_r4_5
- .global __ashiftrt_r4_6
- .global __ashiftrt_r4_7
- .global __ashiftrt_r4_8
- .global __ashiftrt_r4_9
- .global __ashiftrt_r4_10
- .global __ashiftrt_r4_11
- .global __ashiftrt_r4_12
- .global __ashiftrt_r4_13
- .global __ashiftrt_r4_14
- .global __ashiftrt_r4_15
- .global __ashiftrt_r4_16
- .global __ashiftrt_r4_17
- .global __ashiftrt_r4_18
- .global __ashiftrt_r4_19
- .global __ashiftrt_r4_20
- .global __ashiftrt_r4_21
- .global __ashiftrt_r4_22
- .global __ashiftrt_r4_23
- .global __ashiftrt_r4_24
- .global __ashiftrt_r4_25
- .global __ashiftrt_r4_26
- .global __ashiftrt_r4_27
- .global __ashiftrt_r4_28
- .global __ashiftrt_r4_29
- .global __ashiftrt_r4_30
- .global __ashiftrt_r4_31
- .global __ashiftrt_r4_32
-
- .align 1
-__ashiftrt_r4_32:
-__ashiftrt_r4_31:
- rotcl r4
- rts
- subc r4,r4
-__ashiftrt_r4_30:
- shar r4
-__ashiftrt_r4_29:
- shar r4
-__ashiftrt_r4_28:
- shar r4
-__ashiftrt_r4_27:
- shar r4
-__ashiftrt_r4_26:
- shar r4
-__ashiftrt_r4_25:
- shar r4
-__ashiftrt_r4_24:
- shlr16 r4
- shlr8 r4
- rts
- exts.b r4,r4
-__ashiftrt_r4_23:
- shar r4
-__ashiftrt_r4_22:
- shar r4
-__ashiftrt_r4_21:
- shar r4
-__ashiftrt_r4_20:
- shar r4
-__ashiftrt_r4_19:
- shar r4
-__ashiftrt_r4_18:
- shar r4
-__ashiftrt_r4_17:
- shar r4
-__ashiftrt_r4_16:
- shlr16 r4
- rts
- exts.w r4,r4
-__ashiftrt_r4_15:
- shar r4
-__ashiftrt_r4_14:
- shar r4
-__ashiftrt_r4_13:
- shar r4
-__ashiftrt_r4_12:
- shar r4
-__ashiftrt_r4_11:
- shar r4
-__ashiftrt_r4_10:
- shar r4
-__ashiftrt_r4_9:
- shar r4
-__ashiftrt_r4_8:
- shar r4
-__ashiftrt_r4_7:
- shar r4
-__ashiftrt_r4_6:
- shar r4
-__ashiftrt_r4_5:
- shar r4
-__ashiftrt_r4_4:
- shar r4
-__ashiftrt_r4_3:
- shar r4
-__ashiftrt_r4_2:
- shar r4
-__ashiftrt_r4_1:
- rts
- shar r4
-__ashiftrt_r4_0:
- rts
- nop
diff --git a/arch/sh/lib/ashldi3.c b/arch/sh/lib/ashldi3.c
deleted file mode 100644
index e5afe093584742..00000000000000
--- a/arch/sh/lib/ashldi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashldi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.low = 0;
- w.s.high = (unsigned int) uu.s.low << -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.low >> bm;
-
- w.s.low = (unsigned int) uu.s.low << b;
- w.s.high = ((unsigned int) uu.s.high << b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/sh/lib/ashlsi3.S b/arch/sh/lib/ashlsi3.S
deleted file mode 100644
index 4df4401cdf31d5..00000000000000
--- a/arch/sh/lib/ashlsi3.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashlsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashlsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
-
- .global __ashlsi3
- .global __ashlsi3_r0
-
- .align 2
-__ashlsi3:
- mov r5,r0
- .align 2
-__ashlsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashlsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashlsi3_table:
- .byte ashlsi3_0-ashlsi3_table
- .byte ashlsi3_1-ashlsi3_table
- .byte ashlsi3_2-ashlsi3_table
- .byte ashlsi3_3-ashlsi3_table
- .byte ashlsi3_4-ashlsi3_table
- .byte ashlsi3_5-ashlsi3_table
- .byte ashlsi3_6-ashlsi3_table
- .byte ashlsi3_7-ashlsi3_table
- .byte ashlsi3_8-ashlsi3_table
- .byte ashlsi3_9-ashlsi3_table
- .byte ashlsi3_10-ashlsi3_table
- .byte ashlsi3_11-ashlsi3_table
- .byte ashlsi3_12-ashlsi3_table
- .byte ashlsi3_13-ashlsi3_table
- .byte ashlsi3_14-ashlsi3_table
- .byte ashlsi3_15-ashlsi3_table
- .byte ashlsi3_16-ashlsi3_table
- .byte ashlsi3_17-ashlsi3_table
- .byte ashlsi3_18-ashlsi3_table
- .byte ashlsi3_19-ashlsi3_table
- .byte ashlsi3_20-ashlsi3_table
- .byte ashlsi3_21-ashlsi3_table
- .byte ashlsi3_22-ashlsi3_table
- .byte ashlsi3_23-ashlsi3_table
- .byte ashlsi3_24-ashlsi3_table
- .byte ashlsi3_25-ashlsi3_table
- .byte ashlsi3_26-ashlsi3_table
- .byte ashlsi3_27-ashlsi3_table
- .byte ashlsi3_28-ashlsi3_table
- .byte ashlsi3_29-ashlsi3_table
- .byte ashlsi3_30-ashlsi3_table
- .byte ashlsi3_31-ashlsi3_table
-
-ashlsi3_6:
- shll2 r0
-ashlsi3_4:
- shll2 r0
-ashlsi3_2:
- rts
- shll2 r0
-
-ashlsi3_7:
- shll2 r0
-ashlsi3_5:
- shll2 r0
-ashlsi3_3:
- shll2 r0
-ashlsi3_1:
- rts
- shll r0
-
-ashlsi3_14:
- shll2 r0
-ashlsi3_12:
- shll2 r0
-ashlsi3_10:
- shll2 r0
-ashlsi3_8:
- rts
- shll8 r0
-
-ashlsi3_15:
- shll2 r0
-ashlsi3_13:
- shll2 r0
-ashlsi3_11:
- shll2 r0
-ashlsi3_9:
- shll8 r0
- rts
- shll r0
-
-ashlsi3_22:
- shll2 r0
-ashlsi3_20:
- shll2 r0
-ashlsi3_18:
- shll2 r0
-ashlsi3_16:
- rts
- shll16 r0
-
-ashlsi3_23:
- shll2 r0
-ashlsi3_21:
- shll2 r0
-ashlsi3_19:
- shll2 r0
-ashlsi3_17:
- shll16 r0
- rts
- shll r0
-
-ashlsi3_30:
- shll2 r0
-ashlsi3_28:
- shll2 r0
-ashlsi3_26:
- shll2 r0
-ashlsi3_24:
- shll16 r0
- rts
- shll8 r0
-
-ashlsi3_31:
- shll2 r0
-ashlsi3_29:
- shll2 r0
-ashlsi3_27:
- shll2 r0
-ashlsi3_25:
- shll16 r0
- shll8 r0
- rts
- shll r0
-
-ashlsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/ashrdi3.c b/arch/sh/lib/ashrdi3.c
deleted file mode 100644
index ae263fbf25383b..00000000000000
--- a/arch/sh/lib/ashrdi3.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high =
- uu.s.high >> 31;
- w.s.low = uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/sh/lib/ashrsi3.S b/arch/sh/lib/ashrsi3.S
deleted file mode 100644
index bf3c4e03e6ffc9..00000000000000
--- a/arch/sh/lib/ashrsi3.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashrsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
- .global __ashrsi3
- .global __ashrsi3_r0
-
- .align 2
-__ashrsi3:
- mov r5,r0
- .align 2
-__ashrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashrsi3_table:
- .byte ashrsi3_0-ashrsi3_table
- .byte ashrsi3_1-ashrsi3_table
- .byte ashrsi3_2-ashrsi3_table
- .byte ashrsi3_3-ashrsi3_table
- .byte ashrsi3_4-ashrsi3_table
- .byte ashrsi3_5-ashrsi3_table
- .byte ashrsi3_6-ashrsi3_table
- .byte ashrsi3_7-ashrsi3_table
- .byte ashrsi3_8-ashrsi3_table
- .byte ashrsi3_9-ashrsi3_table
- .byte ashrsi3_10-ashrsi3_table
- .byte ashrsi3_11-ashrsi3_table
- .byte ashrsi3_12-ashrsi3_table
- .byte ashrsi3_13-ashrsi3_table
- .byte ashrsi3_14-ashrsi3_table
- .byte ashrsi3_15-ashrsi3_table
- .byte ashrsi3_16-ashrsi3_table
- .byte ashrsi3_17-ashrsi3_table
- .byte ashrsi3_18-ashrsi3_table
- .byte ashrsi3_19-ashrsi3_table
- .byte ashrsi3_20-ashrsi3_table
- .byte ashrsi3_21-ashrsi3_table
- .byte ashrsi3_22-ashrsi3_table
- .byte ashrsi3_23-ashrsi3_table
- .byte ashrsi3_24-ashrsi3_table
- .byte ashrsi3_25-ashrsi3_table
- .byte ashrsi3_26-ashrsi3_table
- .byte ashrsi3_27-ashrsi3_table
- .byte ashrsi3_28-ashrsi3_table
- .byte ashrsi3_29-ashrsi3_table
- .byte ashrsi3_30-ashrsi3_table
- .byte ashrsi3_31-ashrsi3_table
-
-ashrsi3_31:
- rotcl r0
- rts
- subc r0,r0
-
-ashrsi3_30:
- shar r0
-ashrsi3_29:
- shar r0
-ashrsi3_28:
- shar r0
-ashrsi3_27:
- shar r0
-ashrsi3_26:
- shar r0
-ashrsi3_25:
- shar r0
-ashrsi3_24:
- shlr16 r0
- shlr8 r0
- rts
- exts.b r0,r0
-
-ashrsi3_23:
- shar r0
-ashrsi3_22:
- shar r0
-ashrsi3_21:
- shar r0
-ashrsi3_20:
- shar r0
-ashrsi3_19:
- shar r0
-ashrsi3_18:
- shar r0
-ashrsi3_17:
- shar r0
-ashrsi3_16:
- shlr16 r0
- rts
- exts.w r0,r0
-
-ashrsi3_15:
- shar r0
-ashrsi3_14:
- shar r0
-ashrsi3_13:
- shar r0
-ashrsi3_12:
- shar r0
-ashrsi3_11:
- shar r0
-ashrsi3_10:
- shar r0
-ashrsi3_9:
- shar r0
-ashrsi3_8:
- shar r0
-ashrsi3_7:
- shar r0
-ashrsi3_6:
- shar r0
-ashrsi3_5:
- shar r0
-ashrsi3_4:
- shar r0
-ashrsi3_3:
- shar r0
-ashrsi3_2:
- shar r0
-ashrsi3_1:
- rts
- shar r0
-
-ashrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S
deleted file mode 100644
index 3e07074e009813..00000000000000
--- a/arch/sh/lib/checksum.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * $Id: checksum.S,v 1.10 2001/07/06 13:11:32 gniibe Exp $
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Pentium Pro/II routines:
- * Alexander Kjeldaas <astor@guardian.no>
- * Finn Arne Gangstad <finnag@guardian.no>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception
- * handling.
- * Andi Kleen, add zeroing on error
- * converted to pure assembler
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-/*
- * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
- */
-
-.text
-ENTRY(csum_partial)
- /*
- * Experiments with Ethernet and SLIP connections show that buff
- * is aligned on either a 2-byte or 4-byte boundary. We get at
- * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
- * Fortunately, it is easy to convert 2-byte alignment to 4-byte
- * alignment for the unrolled loop.
- */
- mov r4, r0
- tst #3, r0 ! Check alignment.
- bt/s 2f ! Jump if alignment is ok.
- mov r4, r7 ! Keep a copy to check for alignment
- !
- tst #1, r0 ! Check alignment.
- bt 21f ! Jump if alignment is boundary of 2bytes.
-
- ! buf is odd
- tst r5, r5
- add #-1, r5
- bt 9f
- mov.b @r4+, r0
- extu.b r0, r0
- addc r0, r6 ! t=0 from previous tst
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
- mov r4, r0
- tst #2, r0
- bt 2f
-21:
- ! buf is 2 byte aligned (len could be 0)
- add #-2, r5 ! Alignment uses up two bytes.
- cmp/pz r5 !
- bt/s 1f ! Jump if we had at least two bytes.
- clrt
- bra 6f
- add #2, r5 ! r5 was < 2. Deal with it.
-1:
- mov.w @r4+, r0
- extu.w r0, r0
- addc r0, r6
- bf 2f
- add #1, r6
-2:
- ! buf is 4 byte aligned (len could be 0)
- mov r5, r1
- mov #-5, r0
- shld r0, r1
- tst r1, r1
- bt/s 4f ! if it's =0, go to 4f
- clrt
- .align 2
-3:
- mov.l @r4+, r0
- mov.l @r4+, r2
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- addc r0, r6
- addc r2, r6
- movt r0
- dt r1
- bf/s 3b
- cmp/eq #1, r0
- ! here, we know r1==0
- addc r1, r6 ! add carry to r6
-4:
- mov r5, r0
- and #0x1c, r0
- tst r0, r0
- bt 6f
- ! 4 bytes or more remaining
- mov r0, r1
- shlr2 r1
- mov #0, r2
-5:
- addc r2, r6
- mov.l @r4+, r2
- movt r0
- dt r1
- bf/s 5b
- cmp/eq #1, r0
- addc r2, r6
- addc r1, r6 ! r1==0 here, so it means add carry-bit
-6:
- ! 3 bytes or less remaining
- mov #3, r0
- and r0, r5
- tst r5, r5
- bt 9f ! if it's =0 go to 9f
- mov #2, r1
- cmp/hs r1, r5
- bf 7f
- mov.w @r4+, r0
- extu.w r0, r0
- cmp/eq r1, r5
- bt/s 8f
- clrt
- shll16 r0
- addc r0, r6
-7:
- mov.b @r4+, r0
- extu.b r0, r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-8:
- addc r0, r6
- mov #0, r0
- addc r0, r6
-9:
- ! Check if the buffer was misaligned, if so realign sum
- mov r7, r0
- tst #1, r0
- bt 10f
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
-10:
- rts
- mov r6, r0
-
-/*
-unsigned int csum_partial_copy_generic (const char *src, char *dst, int len)
- */
-
-/*
- * Copy from ds while checksumming, otherwise like csum_partial with initial
- * sum being ~0U
- */
-
-#define EXC(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6001f ; \
- .previous
-
-!
-! r4: const char *SRC
-! r5: char *DST
-! r6: int LEN
-!
-ENTRY(csum_partial_copy_generic)
- mov #-1,r7
- mov #3,r0 ! Check src and dest are equally aligned
- mov r4,r1
- and r0,r1
- and r5,r0
- cmp/eq r1,r0
- bf 3f ! Different alignments, use slow version
- tst #1,r0 ! Check dest word aligned
- bf 3f ! If not, do it the slow way
-
- mov #2,r0
- tst r0,r5 ! Check dest alignment.
- bt 2f ! Jump if alignment is ok.
- add #-2,r6 ! Alignment uses up two bytes.
- cmp/pz r6 ! Jump if we had at least two bytes.
- bt/s 1f
- clrt
- add #2,r6 ! r6 was < 2. Deal with it.
- bra 4f
- mov r6,r2
-
-3: ! Handle different src and dest alignments.
- ! This is not common, so simple byte by byte copy will do.
- mov r6,r2
- shlr r6
- tst r6,r6
- bt 4f
- clrt
- .align 2
-5:
-EXC( mov.b @r4+,r1 )
-EXC( mov.b @r4+,r0 )
- extu.b r1,r1
-EXC( mov.b r1,@r5 )
-EXC( mov.b r0,@(1,r5) )
- extu.b r0,r0
- add #2,r5
-
-#ifdef __LITTLE_ENDIAN__
- shll8 r0
-#else
- shll8 r1
-#endif
- or r1,r0
-
- addc r0,r7
- movt r0
- dt r6
- bf/s 5b
- cmp/eq #1,r0
- mov #0,r0
- addc r0, r7
-
- mov r2, r0
- tst #1, r0
- bt 7f
- bra 5f
- clrt
-
- ! src and dest equally aligned, but to a two byte boundary.
- ! Handle first two bytes as a special case
- .align 2
-1:
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- add #2,r5
- extu.w r0,r0
- addc r0,r7
- mov #0,r0
- addc r0,r7
-2:
- mov r6,r2
- mov #-5,r0
- shld r0,r6
- tst r6,r6
- bt/s 2f
- clrt
- .align 2
-1:
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
-EXC( mov.l r1,@(4,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(8,r5) )
-EXC( mov.l r1,@(12,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(16,r5) )
-EXC( mov.l r1,@(20,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(24,r5) )
-EXC( mov.l r1,@(28,r5) )
- addc r1,r7
- add #32,r5
- movt r0
- dt r6
- bf/s 1b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-
-2: mov r2,r6
- mov #0x1c,r0
- and r0,r6
- cmp/pl r6
- bf/s 4f
- clrt
- shlr2 r6
-3:
-EXC( mov.l @r4+,r0 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
- add #4,r5
- movt r0
- dt r6
- bf/s 3b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-4: mov r2,r6
- mov #3,r0
- and r0,r6
- cmp/pl r6
- bf 7f
- mov #2,r1
- cmp/hs r1,r6
- bf 5f
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- extu.w r0,r0
- add #2,r5
- cmp/eq r1,r6
- bt/s 6f
- clrt
- shll16 r0
- addc r0,r7
-5:
-EXC( mov.b @r4+,r0 )
-EXC( mov.b r0,@r5 )
- extu.b r0,r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-6: addc r0,r7
- mov #0,r0
- addc r0,r7
-7:
-
-# Exception handler:
-.section .fixup, "ax"
-
-6001:
- rts
- mov #0,r0
-.previous
- rts
- mov r7,r0
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
deleted file mode 100644
index d4e9d18cee0bcc..00000000000000
--- a/arch/sh/lib/copy_page.S
+++ /dev/null
@@ -1,390 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * copy_page, __copy_user_page, __copy_user implementation of SuperH
- *
- * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Toshinobu Sugioka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-/*
- * copy_page
- * @to: P1 address
- * @from: P1 address
- *
- * void copy_page(void *to, void *from)
- */
-
-/*
- * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch
- * r8 --- from + PAGE_SIZE
- * r9 --- not used
- * r10 --- to
- * r11 --- from
- */
-ENTRY(copy_page)
- mov.l r8,@-r15
- mov.l r10,@-r15
- mov.l r11,@-r15
- mov r4,r10
- mov r5,r11
- mov r5,r8
- mov #(PAGE_SIZE >> 10), r0
- shll8 r0
- shll2 r0
- add r0,r8
- !
-1: mov.l @r11+,r0
- mov.l @r11+,r1
- mov.l @r11+,r2
- mov.l @r11+,r3
- mov.l @r11+,r4
- mov.l @r11+,r5
- mov.l @r11+,r6
- mov.l @r11+,r7
-#if defined(CONFIG_CPU_SH4)
- movca.l r0,@r10
-#else
- mov.l r0,@r10
-#endif
- add #32,r10
- mov.l r7,@-r10
- mov.l r6,@-r10
- mov.l r5,@-r10
- mov.l r4,@-r10
- mov.l r3,@-r10
- mov.l r2,@-r10
- mov.l r1,@-r10
- cmp/eq r11,r8
- bf/s 1b
- add #28,r10
- !
- mov.l @r15+,r11
- mov.l @r15+,r10
- mov.l @r15+,r8
- rts
- nop
-
-/*
- * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
- * Return the number of bytes NOT copied
- */
-#define EX(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6000f ; \
- .previous
-#define EX_NO_POP(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6005f ; \
- .previous
-ENTRY(__copy_user)
- ! Check if small number of bytes
- mov #11,r0
- mov r4,r3
- cmp/gt r0,r6 ! r6 (len) > r0 (11)
- bf/s .L_cleanup_loop_no_pop
- add r6,r3 ! last destination address
-
- ! Calculate bytes needed to align to src
- mov.l r11,@-r15
- neg r5,r0
- mov.l r10,@-r15
- add #4,r0
- mov.l r9,@-r15
- and #3,r0
- mov.l r8,@-r15
- tst r0,r0
- bt 2f
-
-1:
- ! Copy bytes to long word align src
-EX( mov.b @r5+,r1 )
- dt r0
- add #-1,r6
-EX( mov.b r1,@r4 )
- bf/s 1b
- add #1,r4
-
- ! Jump to appropriate routine depending on dest
-2: mov #3,r1
- mov r6, r2
- and r4,r1
- shlr2 r2
- shll2 r1
- mova .L_jump_tbl,r0
- mov.l @(r0,r1),r1
- jmp @r1
- nop
-
- .align 2
-.L_jump_tbl:
- .long .L_dest00
- .long .L_dest01
- .long .L_dest10
- .long .L_dest11
-
-/*
- * Come here if there are less than 12 bytes to copy
- *
- * Keep the branch target close, so the bf/s callee doesn't overflow
- * and result in a more expensive branch being inserted. This is the
- * fast-path for small copies, the jump via the jump table will hit the
- * default slow-path cleanup. -PFM.
- */
-.L_cleanup_loop_no_pop:
- tst r6,r6 ! Check explicitly for zero
- bt 1f
-
-2:
-EX_NO_POP( mov.b @r5+,r0 )
- dt r6
-EX_NO_POP( mov.b r0,@r4 )
- bf/s 2b
- add #1,r4
-
-1: mov #0,r0 ! normal return
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6005:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- rts
- nop
-
-! Destination = 00
-
-.L_dest00:
- ! Skip the large copy for small transfers
- mov #(32+32-4), r0
- cmp/gt r6, r0 ! r0 (60) > r6 (len)
- bt 1f
-
- ! Align dest to a 32 byte boundary
- neg r4,r0
- add #0x20, r0
- and #0x1f, r0
- tst r0, r0
- bt 2f
-
- sub r0, r6
- shlr2 r0
-3:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 3b
- add #4,r4
-
-2:
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r2 )
-EX( mov.l @r5+,r7 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.l @r5+,r11 )
-#ifdef CONFIG_CPU_SH4
-EX( movca.l r0,@r4 )
-#else
-EX( mov.l r0,@r4 )
-#endif
- add #-32, r6
-EX( mov.l r1,@(4,r4) )
- mov #32, r0
-EX( mov.l r2,@(8,r4) )
- cmp/gt r6, r0 ! r0 (32) > r6 (len)
-EX( mov.l r7,@(12,r4) )
-EX( mov.l r8,@(16,r4) )
-EX( mov.l r9,@(20,r4) )
-EX( mov.l r10,@(24,r4) )
-EX( mov.l r11,@(28,r4) )
- bf/s 2b
- add #32,r4
-
-1: mov r6, r0
- shlr2 r0
- tst r0, r0
- bt .L_cleanup
-1:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 10
-
-.L_dest10:
- mov r2,r7
- shlr2 r7
- shlr r7
- tst r7,r7
- mov #7,r0
- bt/s 1f
- and r0,r2
-2:
- dt r7
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.w r0,@r4 )
- add #2,r4
- xtrct r1,r0
- xtrct r8,r1
- xtrct r9,r8
- xtrct r10,r9
-
-EX( mov.l r0,@r4 )
-EX( mov.l r1,@(4,r4) )
-EX( mov.l r8,@(8,r4) )
-EX( mov.l r9,@(12,r4) )
-
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r0 )
- xtrct r1,r10
- xtrct r8,r1
- xtrct r0,r8
- shlr16 r0
-EX( mov.l r10,@(16,r4) )
-EX( mov.l r1,@(20,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.w r0,@(28,r4) )
- bf/s 2b
- add #30,r4
-#else
-EX( mov.l @(28,r5),r0 )
-EX( mov.l @(24,r5),r8 )
-EX( mov.l @(20,r5),r9 )
-EX( mov.l @(16,r5),r10 )
-EX( mov.w r0,@(30,r4) )
- add #-2,r4
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(28,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.l r9,@(20,r4) )
-
-EX( mov.l @(12,r5),r0 )
-EX( mov.l @(8,r5),r8 )
- xtrct r0,r10
-EX( mov.l @(4,r5),r9 )
- mov.l r10,@(16,r4)
-EX( mov.l @r5,r10 )
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(12,r4) )
-EX( mov.l r8,@(8,r4) )
- swap.w r10,r0
-EX( mov.l r9,@(4,r4) )
-EX( mov.w r0,@(2,r4) )
-
- add #32,r5
- bf/s 2b
- add #34,r4
-#endif
- tst r2,r2
- bt .L_cleanup
-
-1: ! Read longword, write two words per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.w r0,@(2,r4) )
-#else
-EX( mov.w r0,@(2,r4) )
- shlr16 r0
-EX( mov.w r0,@r4 )
-#endif
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 01 or 11
-
-.L_dest01:
-.L_dest11:
- ! Read longword, write byte, word, byte per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.b r0,@r4 )
- shlr8 r0
- add #1,r4
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.b r0,@(2,r4) )
- bf/s .L_dest01
- add #3,r4
-#else
-EX( mov.b r0,@(3,r4) )
- shlr8 r0
- swap.w r0,r7
-EX( mov.b r7,@r4 )
- add #1,r4
-EX( mov.w r0,@r4 )
- bf/s .L_dest01
- add #3,r4
-#endif
-
-! Cleanup last few bytes
-.L_cleanup:
- mov r6,r0
- and #3,r0
- tst r0,r0
- bt .L_exit
- mov r0,r6
-
-.L_cleanup_loop:
-EX( mov.b @r5+,r0 )
- dt r6
-EX( mov.b r0,@r4 )
- bf/s .L_cleanup_loop
- add #1,r4
-
-.L_exit:
- mov #0,r0 ! normal return
-
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6000:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- rts
- mov.l @r15+,r11
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
deleted file mode 100644
index dad8e6a54906be..00000000000000
--- a/arch/sh/lib/delay.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Precise Delay Loops for SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka & Kaz Kojima
- */
-
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-void __delay(unsigned long loops)
-{
- __asm__ __volatile__(
- /*
- * ST40-300 appears to have an issue with this code,
- * normally taking two cycles each loop, as with all
- * other SH variants. If however the branch and the
- * delay slot straddle an 8 byte boundary, this increases
- * to 3 cycles.
- * This align directive ensures this doesn't occur.
- */
- ".balign 8\n\t"
-
- "tst %0, %0\n\t"
- "1:\t"
- "bf/s 1b\n\t"
- " dt %0"
- : "=r" (loops)
- : "0" (loops)
- : "t");
-}
-
-inline void __const_udelay(unsigned long xloops)
-{
- xloops *= 4;
- __asm__("dmulu.l %0, %2\n\t"
- "sts mach, %0"
- : "=r" (xloops)
- : "0" (xloops),
- "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
- : "macl", "mach");
- __delay(++xloops);
-}
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
-}
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00000005);
-}
-
diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
deleted file mode 100644
index 0b67fbc44f6fef..00000000000000
--- a/arch/sh/lib/div64-generic.c
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic __div64_32 wrapper for __xdiv64_32.
- */
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-extern uint64_t __xdiv64_32(u64 n, u32 d);
-
-uint32_t __div64_32(u64 *xp, u32 y)
-{
- uint32_t rem;
- uint64_t q = __xdiv64_32(*xp, y);
-
- rem = *xp - q * y;
- *xp = q;
-
- return rem;
-}
diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S
deleted file mode 100644
index 4a9a966e71b0e7..00000000000000
--- a/arch/sh/lib/div64.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * unsigned long __xdiv64_32(unsigned long long n, unsigned long d);
- */
-
-#include <linux/linkage.h>
-
-.text
-ENTRY(__xdiv64_32)
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r4, r0
- mov r5, r1
-#else
- mov r4, r1
- mov r5, r0
-#endif
- cmp/hs r6, r1
- bf.s 1f
- mov #0, r2
-
- mov r1, r2
- mov #0, r3
- div0u
- .rept 32
- rotcl r2
- div1 r6, r3
- .endr
- rotcl r2
- mul.l r6, r2
- sts macl, r3
- sub r3, r1
-1:
- div0u
- .rept 32
- rotcl r0
- div1 r6, r1
- .endr
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r2, r1
- rts
- rotcl r0
-#else
- rotcl r0
- mov r0, r1
- rts
- mov r2, r0
-#endif
diff --git a/arch/sh/lib/io.c b/arch/sh/lib/io.c
deleted file mode 100644
index ebcf7c0a7335ad..00000000000000
--- a/arch/sh/lib/io.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/lib/io.c - SH32 optimized I/O routines
- *
- * Copyright (C) 2000 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- *
- * Provide real functions which expand to whatever the header file defined.
- * Also definitions of machine independent IO functions.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-void __raw_readsl(const void __iomem *addr, void *datap, int len)
-{
- u32 *data;
-
- for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
- *data++ = __raw_readl(addr);
-
- if (likely(len >= (0x20 >> 2))) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l @%7, %2 \n\t"
-#ifdef CONFIG_CPU_SH4
- "movca.l r0, @%0 \n\t"
-#else
- "mov.l r0, @%0 \n\t"
-#endif
- "mov.l @%7, %3 \n\t"
- "mov.l @%7, %4 \n\t"
- "mov.l @%7, %5 \n\t"
- "mov.l @%7, %6 \n\t"
- "mov.l @%7, r7 \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20>>2, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > len \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (data), "=&r" (len),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6)
- : "r"(addr), "0" (data), "1" (len)
- : "r0", "r7", "t", "memory");
- }
-
- for (; len != 0; len--)
- *data++ = __raw_readl(addr);
-}
-EXPORT_SYMBOL(__raw_readsl);
-
-void __raw_writesl(void __iomem *addr, const void *data, int len)
-{
- if (likely(len != 0)) {
- int tmp1;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "mov.l @%0+, %1 \n\t"
- "dt %3 \n\t"
- "bf.s 1b \n\t"
- " mov.l %1, @%4 \n\t"
- : "=&r" (data), "=&r" (tmp1)
- : "0" (data), "r" (len), "r"(addr)
- : "t", "memory");
- }
-}
-EXPORT_SYMBOL(__raw_writesl);
diff --git a/arch/sh/lib/libgcc.h b/arch/sh/lib/libgcc.h
deleted file mode 100644
index 58ada9e8f1c2bd..00000000000000
--- a/arch/sh/lib/libgcc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_LIBGCC_H
-#define __ASM_LIBGCC_H
-
-#include <asm/byteorder.h>
-
-typedef int word_type __attribute__ ((mode (__word__)));
-
-#ifdef __BIG_ENDIAN
-struct DWstruct {
- int high, low;
-};
-#elif defined(__LITTLE_ENDIAN)
-struct DWstruct {
- int low, high;
-};
-#else
-#error I feel sick.
-#endif
-
-typedef union {
- struct DWstruct s;
- long long ll;
-} DWunion;
-
-#endif /* __ASM_LIBGCC_H */
diff --git a/arch/sh/lib/lshrdi3.c b/arch/sh/lib/lshrdi3.c
deleted file mode 100644
index 33eaa1edbc3c06..00000000000000
--- a/arch/sh/lib/lshrdi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __lshrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.high = 0;
- w.s.low = (unsigned int) uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = (unsigned int) uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/sh/lib/lshrsi3.S b/arch/sh/lib/lshrsi3.S
deleted file mode 100644
index b79b8170061f33..00000000000000
--- a/arch/sh/lib/lshrsi3.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __lshrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __lshrsi3_r0
-!
-! Entry:
-!
-! r0: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
- .global __lshrsi3
- .global __lshrsi3_r0
-
- .align 2
-__lshrsi3:
- mov r5,r0
- .align 2
-__lshrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova lshrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-lshrsi3_table:
- .byte lshrsi3_0-lshrsi3_table
- .byte lshrsi3_1-lshrsi3_table
- .byte lshrsi3_2-lshrsi3_table
- .byte lshrsi3_3-lshrsi3_table
- .byte lshrsi3_4-lshrsi3_table
- .byte lshrsi3_5-lshrsi3_table
- .byte lshrsi3_6-lshrsi3_table
- .byte lshrsi3_7-lshrsi3_table
- .byte lshrsi3_8-lshrsi3_table
- .byte lshrsi3_9-lshrsi3_table
- .byte lshrsi3_10-lshrsi3_table
- .byte lshrsi3_11-lshrsi3_table
- .byte lshrsi3_12-lshrsi3_table
- .byte lshrsi3_13-lshrsi3_table
- .byte lshrsi3_14-lshrsi3_table
- .byte lshrsi3_15-lshrsi3_table
- .byte lshrsi3_16-lshrsi3_table
- .byte lshrsi3_17-lshrsi3_table
- .byte lshrsi3_18-lshrsi3_table
- .byte lshrsi3_19-lshrsi3_table
- .byte lshrsi3_20-lshrsi3_table
- .byte lshrsi3_21-lshrsi3_table
- .byte lshrsi3_22-lshrsi3_table
- .byte lshrsi3_23-lshrsi3_table
- .byte lshrsi3_24-lshrsi3_table
- .byte lshrsi3_25-lshrsi3_table
- .byte lshrsi3_26-lshrsi3_table
- .byte lshrsi3_27-lshrsi3_table
- .byte lshrsi3_28-lshrsi3_table
- .byte lshrsi3_29-lshrsi3_table
- .byte lshrsi3_30-lshrsi3_table
- .byte lshrsi3_31-lshrsi3_table
-
-lshrsi3_6:
- shlr2 r0
-lshrsi3_4:
- shlr2 r0
-lshrsi3_2:
- rts
- shlr2 r0
-
-lshrsi3_7:
- shlr2 r0
-lshrsi3_5:
- shlr2 r0
-lshrsi3_3:
- shlr2 r0
-lshrsi3_1:
- rts
- shlr r0
-
-lshrsi3_14:
- shlr2 r0
-lshrsi3_12:
- shlr2 r0
-lshrsi3_10:
- shlr2 r0
-lshrsi3_8:
- rts
- shlr8 r0
-
-lshrsi3_15:
- shlr2 r0
-lshrsi3_13:
- shlr2 r0
-lshrsi3_11:
- shlr2 r0
-lshrsi3_9:
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_22:
- shlr2 r0
-lshrsi3_20:
- shlr2 r0
-lshrsi3_18:
- shlr2 r0
-lshrsi3_16:
- rts
- shlr16 r0
-
-lshrsi3_23:
- shlr2 r0
-lshrsi3_21:
- shlr2 r0
-lshrsi3_19:
- shlr2 r0
-lshrsi3_17:
- shlr16 r0
- rts
- shlr r0
-
-lshrsi3_30:
- shlr2 r0
-lshrsi3_28:
- shlr2 r0
-lshrsi3_26:
- shlr2 r0
-lshrsi3_24:
- shlr16 r0
- rts
- shlr8 r0
-
-lshrsi3_31:
- shlr2 r0
-lshrsi3_29:
- shlr2 r0
-lshrsi3_27:
- shlr2 r0
-lshrsi3_25:
- shlr16 r0
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
deleted file mode 100644
index c6ca90cc960618..00000000000000
--- a/arch/sh/lib/mcount.S
+++ /dev/null
@@ -1,287 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/lib/mcount.S
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- * Copyright (C) 2008, 2009 Matt Fleming
- */
-#include <asm/ftrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#define MCOUNT_ENTER() \
- mov.l r4, @-r15; \
- mov.l r5, @-r15; \
- mov.l r6, @-r15; \
- mov.l r7, @-r15; \
- sts.l pr, @-r15; \
- \
- mov.l @(20,r15),r4; \
- sts pr, r5
-
-#define MCOUNT_LEAVE() \
- lds.l @r15+, pr; \
- mov.l @r15+, r7; \
- mov.l @r15+, r6; \
- mov.l @r15+, r5; \
- rts; \
- mov.l @r15+, r4
-
-#ifdef CONFIG_STACK_DEBUG
-/*
- * Perform diagnostic checks on the state of the kernel stack.
- *
- * Check for stack overflow. If there is less than 1KB free
- * then it has overflowed.
- *
- * Make sure the stack pointer contains a valid address. Valid
- * addresses for kernel stacks are anywhere after the bss
- * (after __bss_stop) and anywhere in init_thread_union (init_stack).
- */
-#define STACK_CHECK() \
- mov #(THREAD_SIZE >> 10), r0; \
- shll8 r0; \
- shll2 r0; \
- \
- /* r1 = sp & (THREAD_SIZE - 1) */ \
- mov #-1, r1; \
- add r0, r1; \
- and r15, r1; \
- \
- mov #TI_SIZE, r3; \
- mov #(STACK_WARN >> 8), r2; \
- shll8 r2; \
- add r3, r2; \
- \
- /* Is the stack overflowing? */ \
- cmp/hi r2, r1; \
- bf stack_panic; \
- \
- /* If sp > __bss_stop then we're OK. */ \
- mov.l .L_ebss, r1; \
- cmp/hi r1, r15; \
- bt 1f; \
- \
- /* If sp < init_stack, we're not OK. */ \
- mov.l .L_init_thread_union, r1; \
- cmp/hs r1, r15; \
- bf stack_panic; \
- \
- /* If sp > init_stack && sp < __bss_stop, not OK. */ \
- add r0, r1; \
- cmp/hs r1, r15; \
- bt stack_panic; \
-1:
-#else
-#define STACK_CHECK()
-#endif /* CONFIG_STACK_DEBUG */
-
- .align 2
- .globl _mcount
- .type _mcount,@function
- .globl mcount
- .type mcount,@function
-_mcount:
-mcount:
- STACK_CHECK()
-
-#ifndef CONFIG_FUNCTION_TRACER
- rts
- nop
-#else
- MCOUNT_ENTER()
-
-#ifdef CONFIG_DYNAMIC_FTRACE
- .globl mcount_call
-mcount_call:
- mov.l .Lftrace_stub, r6
-#else
- mov.l .Lftrace_trace_function, r6
- mov.l ftrace_stub, r7
- cmp/eq r6, r7
- bt skip_trace
- mov.l @r6, r6
-#endif
-
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- mov.l .Lftrace_graph_return, r6
- mov.l .Lftrace_stub, r7
- cmp/eq r6, r7
- bt 1f
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
-1:
- mov.l .Lftrace_graph_entry, r6
- mov.l .Lftrace_graph_entry_stub, r7
- cmp/eq r6, r7
- bt skip_trace
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
- .align 2
-.Lftrace_graph_return:
- .long ftrace_graph_return
-.Lftrace_graph_entry:
- .long ftrace_graph_entry
-.Lftrace_graph_entry_stub:
- .long ftrace_graph_entry_stub
-.Lftrace_graph_caller:
- .long ftrace_graph_caller
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl skip_trace
-skip_trace:
- MCOUNT_LEAVE()
-
- .align 2
-.Lftrace_trace_function:
- .long ftrace_trace_function
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-/*
- * NOTE: Do not move either ftrace_graph_call or ftrace_caller
- * as this will affect the calculation of GRAPH_INSN_OFFSET.
- */
- .globl ftrace_graph_call
-ftrace_graph_call:
- mov.l .Lskip_trace, r0
- jmp @r0
- nop
-
- .align 2
-.Lskip_trace:
- .long skip_trace
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl ftrace_caller
-ftrace_caller:
- MCOUNT_ENTER()
-
- .globl ftrace_call
-ftrace_call:
- mov.l .Lftrace_stub, r6
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- bra ftrace_graph_call
- nop
-#else
- MCOUNT_LEAVE()
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
- .align 2
-
-/*
- * NOTE: From here on the locations of the .Lftrace_stub label and
- * ftrace_stub itself are fixed. Adding additional data here will skew
- * the displacement for the memory table and break the block replacement.
- * Place new labels either after the ftrace_stub body, or before
- * ftrace_caller. You have been warned.
- */
-.Lftrace_stub:
- .long ftrace_stub
-
- .globl ftrace_stub
-ftrace_stub:
- rts
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- .globl ftrace_graph_caller
-ftrace_graph_caller:
- mov.l 2f, r1
- jmp @r1
- nop
-1:
- /*
- * MCOUNT_ENTER() pushed 5 registers onto the stack, so
- * the stack address containing our return address is
- * r15 + 20.
- */
- mov #20, r0
- add r15, r0
- mov r0, r4
-
- mov.l .Lprepare_ftrace_return, r0
- jsr @r0
- nop
-
- MCOUNT_LEAVE()
-
- .align 2
-2: .long skip_trace
-.Lprepare_ftrace_return:
- .long prepare_ftrace_return
-
- .globl return_to_handler
-return_to_handler:
- /*
- * Save the return values.
- */
- mov.l r0, @-r15
- mov.l r1, @-r15
-
- mov #0, r4
-
- mov.l .Lftrace_return_to_handler, r0
- jsr @r0
- nop
-
- /*
- * The return value from ftrace_return_handler has the real
- * address that we should return to.
- */
- lds r0, pr
- mov.l @r15+, r1
- rts
- mov.l @r15+, r0
-
-
- .align 2
-.Lftrace_return_to_handler:
- .long ftrace_return_to_handler
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_STACK_DEBUG
- .globl stack_panic
-stack_panic:
- mov.l .Ldump_stack, r0
- jsr @r0
- nop
-
- mov.l .Lpanic, r0
- jsr @r0
- mov.l .Lpanic_s, r4
-
- rts
- nop
-
- .align 2
-.L_init_thread_union:
- .long init_thread_union
-.L_ebss:
- .long __bss_stop
-.Lpanic:
- .long panic
-.Lpanic_s:
- .long .Lpanic_str
-.Ldump_stack:
- .long dump_stack
-
- .section .rodata
- .align 2
-.Lpanic_str:
- .string "Stack error"
-#endif /* CONFIG_STACK_DEBUG */
diff --git a/arch/sh/lib/memchr.S b/arch/sh/lib/memchr.S
deleted file mode 100644
index 8ded104077aa32..00000000000000
--- a/arch/sh/lib/memchr.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memchr.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memchr" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memchr(const void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-ENTRY(memchr)
- tst r6,r6
- bt/s 2f
- exts.b r5,r5
-1: mov.b @r4,r1
- cmp/eq r1,r5
- bt/s 3f
- dt r6
- bf/s 1b
- add #1,r4
-2: mov #0,r4
-3: rts
- mov r4,r0
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
deleted file mode 100644
index a2435c0f6302ff..00000000000000
--- a/arch/sh/lib/memcpy-sh4.S
+++ /dev/null
@@ -1,800 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2002 STMicroelectronics Ltd
- * Modified from memcpy.S and micro-optimised for SH4
- * Stuart Menefy (stuart.menefy@st.com)
- *
- */
-#include <linux/linkage.h>
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- *
- * It is assumed that there is no overlap between src and dst.
- * If there is an overlap, then the results are undefined.
- */
-
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase1:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-1,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll16 r3 ! 103 EX
-
- mov r1,r6 ! 5 MT (latency=0)
- shll8 r3 ! 102 EX ! Oxxx
-
- shlr8 r6 ! 106 EX ! xNML
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! ONML
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! KLMN
- mov r7,r3 ! 5 MT (latency=0) ! OPQR
-
- cmp/hi r2,r0 ! 57 MT
- shlr16 r3 ! 107 EX
-
- shlr8 r3 ! 106 EX ! xxxO
- mov r1,r6 ! 5 MT (latency=0)
-
- shll8 r6 ! 102 EX ! LMNx
- mov r1,r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! LMNO
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#endif
- ! Finally, copy a byte at once, if necessary
-
- add #4,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase3:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-3,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll8 r3 ! 102 EX ! QPOx
-
- mov r1,r6 ! 5 MT (latency=0)
- shlr16 r6 ! 107 EX
-
- shlr8 r6 ! 106 EX ! xxxN
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! QPON
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov r7,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r7 ! KLMN
- mov r7,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
-
- ! Finally, copy a byte at once, if necessary
-
- add #6,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-ENTRY(memcpy)
-
- ! Calculate the invariants which will be used in the remainder
- ! of the code:
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
-
- ! Short circuit the common case of src, dst and len being 32 bit aligned
- ! and test for zero length move
-
- mov r6, r0 ! 5 MT (0 cycle latency)
- or r4, r0 ! 82 EX
-
- or r5, r0 ! 82 EX
- tst r6, r6 ! 86 MT
-
- bt/s 99f ! 111 BR (zero len)
- tst #3, r0 ! 87 MT
-
- mov r4, r0 ! 5 MT (0 cycle latency)
- add r6, r0 ! 49 EX
-
- mov #16, r1 ! 6 EX
- bt/s .Lcase00 ! 111 BR (aligned)
-
- sub r4, r5 ! 75 EX
-
- ! Arguments are not nicely long word aligned or zero len.
- ! Check for small copies, and if so do a simple byte at a time copy.
- !
- ! Deciding on an exact value of 'small' is not easy, as the point at which
- ! using the optimised routines become worthwhile varies (these are the
- ! cycle counts for differnet sizes using byte-at-a-time vs. optimised):
- ! size byte-at-time long word byte
- ! 16 42 39-40 46-50 50-55
- ! 24 58 43-44 54-58 62-67
- ! 36 82 49-50 66-70 80-85
- ! However the penalty for getting it 'wrong' is much higher for long word
- ! aligned data (and this is more common), so use a value of 16.
-
- cmp/gt r6,r1 ! 56 MT
-
- add #-1,r5 ! 50 EX
- bf/s 6f ! 108 BR (not small)
-
- mov r5, r3 ! 5 MT (latency=0)
- shlr r6 ! 104 EX
-
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
- bf/s 4f ! 111 BR
-
- add #-1,r3 ! 50 EX
- tst r6, r6 ! 86 MT
-
- bt/s 98f ! 110 BR
- mov.b r1,@-r0 ! 29 LS
-
- ! 4 cycles, 2 bytes per iteration
-3: mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
-4: mov.b @(r0,r3),r2 ! 20 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.b r1,@-r0 ! 29 LS
- bf/s 3b ! 111 BR
-
- mov.b r2,@-r0 ! 29 LS
-98:
- rts
- nop
-
-99: rts
- mov r4, r0
-
- ! Size is not small, so its worthwhile looking for optimisations.
- ! First align destination to a long word boundary.
- !
- ! r5 = normal value -1
-
-6: tst #3, r0 ! 87 MT
- mov #3, r3 ! 6 EX
-
- bt/s 2f ! 111 BR
- and r0,r3 ! 78 EX
-
- ! 3 cycles, 1 byte per iteration
-1: dt r3 ! 67 EX
- mov.b @(r0,r5),r1 ! 19 LS (latency=2)
-
- add #-1, r6 ! 79 EX
- bf/s 1b ! 109 BR
-
- mov.b r1,@-r0 ! 28 LS
-
-2: add #1, r5 ! 79 EX
-
- ! Now select the appropriate bulk transfer code based on relative
- ! alignment of src and dst.
-
- mov r0, r3 ! 5 MT (latency=0)
-
- mov r5, r0 ! 5 MT (latency=0)
- tst #1, r0 ! 87 MT
-
- bf/s 1f ! 111 BR
- mov #64, r7 ! 6 EX
-
- ! bit 0 clear
-
- cmp/ge r7, r6 ! 55 MT
-
- bt/s 2f ! 111 BR
- tst #2, r0 ! 87 MT
-
- ! small
- bt/s .Lcase0
- mov r3, r0
-
- bra .Lcase2
- nop
-
- ! big
-2: bt/s .Lcase0b
- mov r3, r0
-
- bra .Lcase2b
- nop
-
- ! bit 0 set
-1: tst #2, r0 ! 87 MT
-
- bt/s .Lcase1
- mov r3, r0
-
- bra .Lcase3
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
-
- ! src, dst and size are all long word aligned
- ! size is non-zero
-
- .balign 32
-.Lcase00:
- mov #64, r1 ! 6 EX
- mov r5, r3 ! 5 MT (latency=0)
-
- cmp/gt r6, r1 ! 56 MT
- add #-4, r5 ! 50 EX
-
- bf .Lcase00b ! 108 BR (big loop)
- shlr2 r6 ! 105 EX
-
- shlr r6 ! 104 EX
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
- bf/s 4f ! 111 BR
- add #-8, r3 ! 50 EX
-
- tst r6, r6 ! 86 MT
- bt/s 5f ! 110 BR
-
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
-5: rts
- nop
-
-
- ! Size is 16 or greater and less than 64, but may have trailing bytes
-
- .balign 32
-.Lcase0:
- add #-4, r5 ! 50 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- mov #4, r2 ! 6 EX
-
- add #11, r7 ! 50 EX
- tst r2, r6 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r1, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
- add #3,r5 ! 50 EX
-
- cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- .balign 32
-.Lcase0b:
- add #-4, r5 ! 50 EX
-
-.Lcase00b:
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! copy initial words until cache line aligned
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- tst #4, r0 ! 87 MT
-
- mov r5, r6 ! 5 MT (latency=0)
- add #-4, r6 ! 50 EX
-
- bt/s 4f ! 111 BR
- add #8, r3 ! 50 EX
-
- tst #0x18, r0 ! 87 MT
-
- bt/s 1f ! 109 BR
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r6), r7 ! 21 LS (latency=2)
- cmp/eq r3, r0 ! 54 MT
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r7, @-r0 ! 30 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1c, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- ! 16 cycles, 32 bytes per iteration
-2: mov.l @(0x00,r5),r0 ! 18 LS (latency=2)
- add #-0x20, r1 ! 50 EX
- mov.l @(0x04,r5),r3 ! 18 LS (latency=2)
- mov.l @(0x08,r5),r6 ! 18 LS (latency=2)
- mov.l @(0x0c,r5),r7 ! 18 LS (latency=2)
- mov.l @(0x10,r5),r8 ! 18 LS (latency=2)
- mov.l @(0x14,r5),r9 ! 18 LS (latency=2)
- mov.l @(0x18,r5),r10 ! 18 LS (latency=2)
- mov.l @(0x1c,r5),r11 ! 18 LS (latency=2)
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- mov.l r3,@(0x04,r1) ! 33 LS
- mov.l r6,@(0x08,r1) ! 33 LS
- mov.l r7,@(0x0c,r1) ! 33 LS
-
- mov.l r8,@(0x10,r1) ! 33 LS
- add #-0x20, r5 ! 50 EX
-
- mov.l r9,@(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10,@(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11,@(0x1c,r1) ! 33 LS
-
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
- sub r4, r1 ! 75 EX (len remaining)
-
- ! number of trailing bytes is non-zero
- !
- ! invariants restored (r5 already decremented by 4)
- ! also r1=num bytes remaining
-
- mov #4, r2 ! 6 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- add #0x1c, r5 ! 50 EX (back to -4)
- cmp/hs r2, r1 ! 58 MT
-
- bf/s 5f ! 108 BR
- add #11, r7 ! 50 EX
-
- mov.l @(r0, r5), r6 ! 21 LS (latency=2)
- tst r2, r1 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- cmp/hs r2, r1 ! 58 MT
-
- bt/s 5f ! 111 BR
- mov.l r6,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r6 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r6, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
-5: cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
- add #3,r5 ! 50 EX
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
-
- .balign 32
-.Lcase2:
- ! Size is 16 or greater and less then 64, but may have trailing bytes
-
-2: mov r5, r6 ! 5 MT (latency=0)
- add #-2,r5 ! 50 EX
-
- mov r4,r2 ! 5 MT (latency=0)
- add #-4,r6 ! 50 EX
-
- add #7,r2 ! 50 EX
-3: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
-
- mov.w @(r0,r6),r3 ! 20 LS (latency=2)
- cmp/hi r2,r0 ! 57 MT
-
- mov.w r1,@-r0 ! 29 LS
- bt/s 3b ! 111 BR
-
- mov.w r3,@-r0 ! 29 LS
-
- bra 10f
- nop
-
-
- .balign 32
-.Lcase2b:
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- add #-2, r5 ! 50 EX
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! Copy a short word one at a time until we are cache line aligned
- ! Normal values: r0, r2, r3, r4
- ! Unused: r1, r6, r7
- ! Mod: r5 (=r5-2)
- !
- add #2, r3 ! 50 EX
-
-2: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
- cmp/eq r3,r0 ! 54 MT
-
- bf/s 2b ! 111 BR
-
- mov.w r1,@-r0 ! 29 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5 (=r5-2)
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- mov.l r12, @-r15 ! 30 LS
-
- ! 17 cycles, 32 bytes per iteration
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-2: mov.w @r5+, r0 ! 14 LS (latency=2) ..JI
- add #-0x20, r1 ! 50 EX
-
- mov.l @r5+, r3 ! 15 LS (latency=2) NMLK
-
- mov.l @r5+, r6 ! 15 LS (latency=2) RQPO
- shll16 r0 ! 103 EX JI..
-
- mov.l @r5+, r7 ! 15 LS (latency=2)
- xtrct r3, r0 ! 48 EX LKJI
-
- mov.l @r5+, r8 ! 15 LS (latency=2)
- xtrct r6, r3 ! 48 EX PONM
-
- mov.l @r5+, r9 ! 15 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @r5+, r10 ! 15 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @r5+, r11 ! 15 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.w @r5+, r12 ! 15 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- xtrct r11, r10 ! 48 EX
-
- mov.l r3, @(0x04,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r6, @(0x08,r1) ! 33 LS
-
- mov.l r7, @(0x0c,r1) ! 33 LS
-
- mov.l r8, @(0x10,r1) ! 33 LS
- add #-0x40, r5 ! 50 EX
-
- mov.l r9, @(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x1c,r1) ! 33 LS
-#else
-2: mov.w @(0x1e,r5), r0 ! 17 LS (latency=2)
- add #-2, r5 ! 50 EX
-
- mov.l @(0x1c,r5), r3 ! 18 LS (latency=2)
- add #-4, r1 ! 50 EX
-
- mov.l @(0x18,r5), r6 ! 18 LS (latency=2)
- shll16 r0 ! 103 EX
-
- mov.l @(0x14,r5), r7 ! 18 LS (latency=2)
- xtrct r3, r0 ! 48 EX
-
- mov.l @(0x10,r5), r8 ! 18 LS (latency=2)
- xtrct r6, r3 ! 48 EX
-
- mov.l @(0x0c,r5), r9 ! 18 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @(0x08,r5), r10 ! 18 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @(0x04,r5), r11 ! 18 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.l @(0x00,r5), r12 ! 18 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- add #-0x1c, r1 ! 50 EX
-
- mov.l r3, @(0x18,r1) ! 33 LS
- xtrct r11, r10 ! 48 EX
-
- mov.l r6, @(0x14,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r7, @(0x10,r1) ! 33 LS
-
- mov.l r8, @(0x0c,r1) ! 33 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r9, @(0x08,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x04,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x00,r1) ! 33 LS
-#endif
-
- mov.l @r15+, r12
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
-
- add #0x1e, r5 ! 50 EX
-
- ! Finish off a short word at a time
- ! r5 must be invariant - 2
-10: mov r4,r2 ! 5 MT (latency=0)
- add #1,r2 ! 50 EX
-
- cmp/hi r2, r0 ! 57 MT
- bf/s 1f ! 109 BR
-
- add #2, r2 ! 50 EX
-
-3: mov.w @(r0,r5),r1 ! 20 LS
- cmp/hi r2,r0 ! 57 MT
-
- bt/s 3b ! 109 BR
-
- mov.w r1,@-r0 ! 29 LS
-1:
-
- !
- ! Finally, copy the last byte if necessary
- cmp/eq r4,r0 ! 54 MT
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
diff --git a/arch/sh/lib/memcpy.S b/arch/sh/lib/memcpy.S
deleted file mode 100644
index 08ab3062c4b27c..00000000000000
--- a/arch/sh/lib/memcpy.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memcpy.S,v 1.3 2001/07/27 11:50:52 gniibe Exp $
- *
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- * No overlap between the memory of DST and of SRC are assumed.
- */
-
-#include <linux/linkage.h>
-ENTRY(memcpy)
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r4,r0
- sub r4,r5 ! From here, r5 has the distance to r0
- add r6,r0 ! From here, r0 points the end of copying point
- mov #12,r1
- cmp/gt r6,r1
- bt/s 7f ! if it's too small, copy a byte at once
- add #-1,r5
- add #1,r5
- ! From here, r6 is free
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
- mov r5,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-7: mov r4,r2
- add #1,r2
-8:
- cmp/hi r2,r0
- mov.b @(r0,r5),r1
- bt/s 8b ! while (r0>r2)
- mov.b r1,@-r0
-9:
- rts
- nop
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-4,r5
- add #3,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
- add #-3,r5
-2: ! Second, copy a long word at once
- mov r4,r2
- add #7,r2
-3: mov.l @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.l r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #3,r5
- bra 8b
- add #-6,r2
-
-case1:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll16 r3
- shll8 r3 ! Oxxx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr8 r6 ! xNML
- or r6,r3 ! ONML
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr16 r3
- shlr8 r3 ! xxxO
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll8 r6 ! LMNx
- or r6,r3 ! LMNO
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #4,r5
- bra 8b
- add #-6,r2
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r5
- mov.b @(r0,r5),r1
- mov.b r1,@-r0
- !
-2: ! Second, read a word and write a word at once
- add #-1,r5
- mov r4,r2
- add #3,r2
- !
-3: mov.w @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.w r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
-case3:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r5
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll8 r3 ! QPOx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr16 r6
- shlr8 r6 ! xxxN
- or r6,r3 ! QPON
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #6,r5
- bra 8b
- add #-6,r2
diff --git a/arch/sh/lib/memmove.S b/arch/sh/lib/memmove.S
deleted file mode 100644
index bdca321814a95a..00000000000000
--- a/arch/sh/lib/memmove.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memmove.S,v 1.2 2001/07/27 11:51:09 gniibe Exp $
- *
- * "memmove" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memmove(void *dst, const void *src, size_t n);
- * The memory areas may overlap.
- */
-
-#include <linux/linkage.h>
-ENTRY(memmove)
- ! if dest > src, call memcpy (it copies in decreasing order)
- cmp/hi r5,r4
- bf 1f
- mov.l 2f,r0
- jmp @r0
- nop
- .balign 4
-2: .long memcpy
-1:
- sub r5,r4 ! From here, r4 has the distance to r0
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r5,r0
- add r6,r5
- mov #12,r1
- cmp/gt r6,r1
- bt/s 8f ! if it's too small, copy a byte at once
- add #-1,r4
- add #1,r4
- !
- ! [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0+r4--> [ ... ] r0 --> [ ... ]
- ! : :
- ! [ ... ] [ ... ]
- ! r5 -->
- !
- mov r4,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-8: mov.b @r0+,r1
- cmp/hs r5,r0
- bf/s 8b ! while (r0<r5)
- mov.b r1,@(r0,r4)
- add #1,r4
-9:
- add r4,r0
- rts
- sub r6,r0
-
-case_none:
- bra 8b
- add #-1,r4
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, copy a long word at once
- add #-3,r4
- add #-3,r5
-3: mov.l @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.l r1,@(r0,r4)
- add #3,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #4,r4
- bra 8b
- add #-1,r4
-
-case3:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r4
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr8 r3 ! xJIH
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll16 r2
- shll8 r2 ! Kxxx
- or r2,r3 ! KJIH
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll8 r3 ! HIJx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr16 r2
- shlr8 r2 ! xxxK
- or r2,r3 ! HIJK
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #7,r4
- add #-3,r0
- bra 8b
- add #-1,r4
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r4
- mov.b @r0+,r1
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a word and write a word at once
- add #-1,r4
- add #-1,r5
- !
-3: mov.w @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.w r1,@(r0,r4)
- add #1,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #2,r4
- mov.b @r0,r1
- mov.b r1,@(r0,r4)
- bra 9b
- add #1,r0
-
-case1:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll16 r1
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr16 r3
- shlr8 r3 ! xxxJ
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll8 r2 ! MLKx
- or r2,r3 ! MLKJ
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr16 r1
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll16 r3
- shll8 r3 ! Jxxx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr8 r2 ! xKLM
- or r2,r3 ! JKLM
- cmp/hs r5,r0
- bf/s 3b ! while(r0<r5)
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #5,r4
- add #-3,r0
- bra 8b
- add #-1,r4
diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S
deleted file mode 100644
index 10649c4cdab8a4..00000000000000
--- a/arch/sh/lib/memset-sh4.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memset" implementation for SH4
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2009 STMicroelectronics Limited
- * Author: Stuart Menefy <stuart.menefy:st.com>
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- mov #12,r0
- add r6,r4
- cmp/gt r6,r0
- bt/s 40f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
-
- ! Check if enough bytes need to be copied to be worth the big loop
- mov #0x40, r0 ! (MT)
- cmp/gt r6,r0 ! (MT) 64 > len => slow loop
-
- bt/s 22f
- mov r6,r0
-
- ! align the dst to the cache block size if necessary
- mov r4, r3
- mov #~(0x1f), r1
-
- and r3, r1
- cmp/eq r3, r1
-
- bt/s 11f ! dst is already aligned
- sub r1, r3 ! r3-r1 -> r3
- shlr2 r3 ! number of loops
-
-10: mov.l r5,@-r4
- dt r3
- bf/s 10b
- add #-4, r6
-
-11: ! dst is 32byte aligned
- mov r6,r2
- mov #-5,r0
- shld r0,r2 ! number of loops
-
- add #-32, r4
- mov r5, r0
-12:
- movca.l r0,@r4
- mov.l r5,@(4, r4)
- mov.l r5,@(8, r4)
- mov.l r5,@(12,r4)
- mov.l r5,@(16,r4)
- mov.l r5,@(20,r4)
- add #-0x20, r6
- mov.l r5,@(24,r4)
- dt r2
- mov.l r5,@(28,r4)
- bf/s 12b
- add #-32, r4
-
- add #32, r4
- mov #8, r0
- cmp/ge r0, r6
- bf 40f
-
- mov r6,r0
-22:
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
-
- ! fill bytes (length may be zero)
-40: tst r6,r6
- bt 5f
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S
deleted file mode 100644
index a6d5ec0bd9cf93..00000000000000
--- a/arch/sh/lib/memset.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memset.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memset" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- tst r6,r6
- bt/s 5f ! if n=0, do nothing
- add r6,r4
- mov #12,r0
- cmp/gt r6,r0
- bt/s 4f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
- !
- mov r6,r0
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
- tst r6,r6
- bt 5f
- ! fill bytes
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/movmem.S b/arch/sh/lib/movmem.S
deleted file mode 100644
index 8ac54d6b38a1b9..00000000000000
--- a/arch/sh/lib/movmem.S
+++ /dev/null
@@ -1,217 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .text
- .balign 4
- .global __movmem
- .global __movstr
- .set __movstr, __movmem
- /* This would be a lot simpler if r6 contained the byte count
- minus 64, and we wouldn't be called here for a byte count of 64. */
-__movmem:
- sts.l pr,@-r15
- shll2 r6
- bsr __movmemSI52+2
- mov.l @(48,r5),r0
- .balign 4
-movmem_loop: /* Reached with rts */
- mov.l @(60,r5),r0
- add #-64,r6
- mov.l r0,@(60,r4)
- tst r6,r6
- mov.l @(56,r5),r0
- bt movmem_done
- mov.l r0,@(56,r4)
- cmp/pl r6
- mov.l @(52,r5),r0
- add #64,r5
- mov.l r0,@(52,r4)
- add #64,r4
- bt __movmemSI52
-! done all the large groups, do the remainder
-! jump to movmem+
- mova __movmemSI4+4,r0
- add r6,r0
- jmp @r0
-movmem_done: ! share slot insn, works out aligned.
- lds.l @r15+,pr
- mov.l r0,@(56,r4)
- mov.l @(52,r5),r0
- rts
- mov.l r0,@(52,r4)
- .balign 4
-
- .global __movmemSI64
- .global __movstrSI64
- .set __movstrSI64, __movmemSI64
-__movmemSI64:
- mov.l @(60,r5),r0
- mov.l r0,@(60,r4)
- .global __movmemSI60
- .global __movstrSI60
- .set __movstrSI60, __movmemSI60
-__movmemSI60:
- mov.l @(56,r5),r0
- mov.l r0,@(56,r4)
- .global __movmemSI56
- .global __movstrSI56
- .set __movstrSI56, __movmemSI56
-__movmemSI56:
- mov.l @(52,r5),r0
- mov.l r0,@(52,r4)
- .global __movmemSI52
- .global __movstrSI52
- .set __movstrSI52, __movmemSI52
-__movmemSI52:
- mov.l @(48,r5),r0
- mov.l r0,@(48,r4)
- .global __movmemSI48
- .global __movstrSI48
- .set __movstrSI48, __movmemSI48
-__movmemSI48:
- mov.l @(44,r5),r0
- mov.l r0,@(44,r4)
- .global __movmemSI44
- .global __movstrSI44
- .set __movstrSI44, __movmemSI44
-__movmemSI44:
- mov.l @(40,r5),r0
- mov.l r0,@(40,r4)
- .global __movmemSI40
- .global __movstrSI40
- .set __movstrSI40, __movmemSI40
-__movmemSI40:
- mov.l @(36,r5),r0
- mov.l r0,@(36,r4)
- .global __movmemSI36
- .global __movstrSI36
- .set __movstrSI36, __movmemSI36
-__movmemSI36:
- mov.l @(32,r5),r0
- mov.l r0,@(32,r4)
- .global __movmemSI32
- .global __movstrSI32
- .set __movstrSI32, __movmemSI32
-__movmemSI32:
- mov.l @(28,r5),r0
- mov.l r0,@(28,r4)
- .global __movmemSI28
- .global __movstrSI28
- .set __movstrSI28, __movmemSI28
-__movmemSI28:
- mov.l @(24,r5),r0
- mov.l r0,@(24,r4)
- .global __movmemSI24
- .global __movstrSI24
- .set __movstrSI24, __movmemSI24
-__movmemSI24:
- mov.l @(20,r5),r0
- mov.l r0,@(20,r4)
- .global __movmemSI20
- .global __movstrSI20
- .set __movstrSI20, __movmemSI20
-__movmemSI20:
- mov.l @(16,r5),r0
- mov.l r0,@(16,r4)
- .global __movmemSI16
- .global __movstrSI16
- .set __movstrSI16, __movmemSI16
-__movmemSI16:
- mov.l @(12,r5),r0
- mov.l r0,@(12,r4)
- .global __movmemSI12
- .global __movstrSI12
- .set __movstrSI12, __movmemSI12
-__movmemSI12:
- mov.l @(8,r5),r0
- mov.l r0,@(8,r4)
- .global __movmemSI8
- .global __movstrSI8
- .set __movstrSI8, __movmemSI8
-__movmemSI8:
- mov.l @(4,r5),r0
- mov.l r0,@(4,r4)
- .global __movmemSI4
- .global __movstrSI4
- .set __movstrSI4, __movmemSI4
-__movmemSI4:
- mov.l @(0,r5),r0
- rts
- mov.l r0,@(0,r4)
-
- .global __movmem_i4_even
- .global __movstr_i4_even
- .set __movstr_i4_even, __movmem_i4_even
-
- .global __movmem_i4_odd
- .global __movstr_i4_odd
- .set __movstr_i4_odd, __movmem_i4_odd
-
- .global __movmemSI12_i4
- .global __movstrSI12_i4
- .set __movstrSI12_i4, __movmemSI12_i4
-
- .p2align 5
-L_movmem_2mod4_end:
- mov.l r0,@(16,r4)
- rts
- mov.l r1,@(20,r4)
-
- .p2align 2
-
-__movmem_i4_even:
- mov.l @r5+,r0
- bra L_movmem_start_even
- mov.l @r5+,r1
-
-__movmem_i4_odd:
- mov.l @r5+,r1
- add #-4,r4
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r1,@(4,r4)
- mov.l r2,@(8,r4)
-
-L_movmem_loop:
- mov.l r3,@(12,r4)
- dt r6
- mov.l @r5+,r0
- bt/s L_movmem_2mod4_end
- mov.l @r5+,r1
- add #16,r4
-L_movmem_start_even:
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r0,@r4
- dt r6
- mov.l r1,@(4,r4)
- bf/s L_movmem_loop
- mov.l r2,@(8,r4)
- rts
- mov.l r3,@(12,r4)
-
- .p2align 4
-__movmemSI12_i4:
- mov.l @r5,r0
- mov.l @(4,r5),r1
- mov.l @(8,r5),r2
- mov.l r0,@r4
- mov.l r1,@(4,r4)
- rts
- mov.l r2,@(8,r4)
diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S
deleted file mode 100644
index 80ea53dd34f6dd..00000000000000
--- a/arch/sh/lib/strlen.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: strlen.S,v 1.2 2001/06/29 14:07:15 gniibe Exp $
- *
- * "strlen" implementation of SuperH
- *
- * Copyright (C) 1999 Kaz Kojima
- *
- */
-
-/* size_t strlen (const char *s) */
-
-#include <linux/linkage.h>
-ENTRY(strlen)
- mov r4,r0
- and #3,r0
- tst r0,r0
- bt/s 1f
- mov #0,r2
-
- add #-1,r0
- shll2 r0
- shll r0
- braf r0
- nop
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
-1:
- mov #0,r3
-2:
- mov.l @r4+,r1
- cmp/str r3,r1
- bf/s 2b
- add #4,r2
-
- add #-4,r2
-#ifndef __LITTLE_ENDIAN__
- swap.b r1,r1
- swap.w r1,r1
- swap.b r1,r1
-#endif
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt 8f
- add #1,r2
-8:
- rts
- mov r2,r0
diff --git a/arch/sh/lib/udiv_qrnnd.S b/arch/sh/lib/udiv_qrnnd.S
deleted file mode 100644
index 28938daccd6b44..00000000000000
--- a/arch/sh/lib/udiv_qrnnd.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- /* r0: rn r1: qn */ /* r0: n1 r4: n0 r5: d r6: d1 */ /* r2: __m */
- /* n1 < d, but n1 might be larger than d1. */
- .global __udiv_qrnnd_16
- .balign 8
-__udiv_qrnnd_16:
- div0u
- cmp/hi r6,r0
- bt .Lots
- .rept 16
- div1 r6,r0
- .endr
- extu.w r0,r1
- bt 0f
- add r6,r0
-0: rotcl r1
- mulu.w r1,r5
- xtrct r4,r0
- swap.w r0,r0
- sts macl,r2
- cmp/hs r2,r0
- sub r2,r0
- bt 0f
- addc r5,r0
- add #-1,r1
- bt 0f
-1: add #-1,r1
- rts
- add r5,r0
- .balign 8
-.Lots:
- sub r5,r0
- swap.w r4,r1
- xtrct r0,r1
- clrt
- mov r1,r0
- addc r5,r0
- mov #-1,r1
- bf/s 1b
- shlr16 r1
-0: rts
- nop
diff --git a/arch/sh/lib/udivsi3.S b/arch/sh/lib/udivsi3.S
deleted file mode 100644
index 09ed1f9deb2ea7..00000000000000
--- a/arch/sh/lib/udivsi3.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
- .balign 4
- .global __udivsi3
- .type __udivsi3, @function
-div8:
- div1 r5,r4
-div7:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx4:
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- rts; div1 r5,r4
-
-__udivsi3:
- sts.l pr,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- bf/s large_divisor
- div0u
- swap.w r4,r0
- shlr16 r4
- bsr div8
- shll16 r5
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div8
- swap.w r4,r4
- bsr div7
- div1 r5,r4
- lds.l @r15+,pr
- xtrct r4,r0
- swap.w r0,r0
- rotcl r0
- rts
- shlr16 r5
-
-large_divisor:
- mov #0,r0
- xtrct r4,r0
- xtrct r0,r4
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- lds.l @r15+,pr
- rts
- rotcl r0
diff --git a/arch/sh/lib/udivsi3_i4i-Os.S b/arch/sh/lib/udivsi3_i4i-Os.S
deleted file mode 100644
index fa4e4dff3da142..00000000000000
--- a/arch/sh/lib/udivsi3_i4i-Os.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
- *
- * Copyright (C) 2006 Free Software Foundation, Inc.
- */
-
-/* Moderately Space-optimized libgcc routines for the Renesas SH /
- STMicroelectronics ST40 CPUs.
- Contributed by J"orn Rennecke joern.rennecke@st.com. */
-
-/* Size: 186 bytes jointly for udivsi3_i4i and sdivsi3_i4i
- sh4-200 run times:
- udiv small divisor: 55 cycles
- udiv large divisor: 52 cycles
- sdiv small divisor, positive result: 59 cycles
- sdiv large divisor, positive result: 56 cycles
- sdiv small divisor, negative result: 65 cycles (*)
- sdiv large divisor, negative result: 62 cycles (*)
- (*): r2 is restored in the rts delay slot and has a lingering latency
- of two more cycles. */
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
- .type __sdivsi3_i4i, @function
-__udivsi3_i4i:
- sts pr,r1
- mov.l r4,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- swap.w r4,r0
- shlr16 r4
- bf/s large_divisor
- div0u
- mov.l r5,@-r15
- shll16 r5
-sdiv_small_divisor:
- div1 r5,r4
- bsr div6
- div1 r5,r4
- div1 r5,r4
- bsr div6
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div7
- swap.w r4,r4
- div1 r5,r4
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- mov.l @r15+,r5
- swap.w r0,r0
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-div7:
- div1 r5,r4
-div6:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx3:
- rotcl r0
- div1 r5,r4
- rotcl r0
- div1 r5,r4
- rotcl r0
- rts
- div1 r5,r4
-
-large_divisor:
- mov.l r5,@-r15
-sdiv_large_divisor:
- xor r4,r0
- .rept 4
- rotcl r0
- bsr divx3
- div1 r5,r4
- .endr
- mov.l @r15+,r5
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.l r5,@-r15
- bt/s pos_divisor
- cmp/pz r4
- neg r5,r5
- extu.w r5,r0
- bt/s neg_result
- cmp/eq r5,r0
- neg r4,r4
-pos_result:
- swap.w r4,r0
- bra sdiv_check_divisor
- sts pr,r1
-pos_divisor:
- extu.w r5,r0
- bt/s pos_result
- cmp/eq r5,r0
- neg r4,r4
-neg_result:
- mova negate_result,r0
- ;
- mov r0,r1
- swap.w r4,r0
- lds r2,macl
- sts pr,r2
-sdiv_check_divisor:
- shlr16 r4
- bf/s sdiv_large_divisor
- div0u
- bra sdiv_small_divisor
- shll16 r5
- .balign 4
-negate_result:
- neg r0,r0
- jmp @r2
- sts macl,r2
diff --git a/arch/sh/lib/udivsi3_i4i.S b/arch/sh/lib/udivsi3_i4i.S
deleted file mode 100644
index 6944eb6b4a75ca..00000000000000
--- a/arch/sh/lib/udivsi3_i4i.S
+++ /dev/null
@@ -1,645 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-/* This code used shld, thus is not suitable for SH1 / SH2. */
-
-/* Signed / unsigned division without use of FPU, optimized for SH4.
- Uses a lookup table for divisors in the range -128 .. +128, and
- div1 with case distinction for larger divisors in three more ranges.
- The code is lumped together with the table to allow the use of mova. */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define L_LSB 0
-#define L_LSWMSB 1
-#define L_MSWLSB 2
-#else
-#define L_LSB 3
-#define L_LSWMSB 2
-#define L_MSWLSB 1
-#endif
-
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
-__udivsi3_i4i:
- mov.w c128_w, r1
- div0u
- mov r4,r0
- shlr8 r0
- cmp/hi r1,r5
- extu.w r5,r1
- bf udiv_le128
- cmp/eq r5,r1
- bf udiv_ge64k
- shlr r0
- mov r5,r1
- shll16 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
- div1 r5,r0
- div1 r5,r0
- bra udiv_25
- div1 r5,r0
-
-div_le128:
- mova div_table_ix,r0
- bra div_le128_2
- mov.b @(r0,r5),r1
-udiv_le128:
- mov.l r4,@-r15
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mov.l r5,@-r15
-div_le128_2:
- mova div_table_inv,r0
- mov.l @(r0,r1),r1
- mov r5,r0
- tst #0xfe,r0
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- bt/s div_by_1
- mov r4,r0
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- rts
- shld r1,r0
-
-div_by_1_neg:
- neg r4,r0
-div_by_1:
- mov.l @r15+,r5
- rts
- mov.l @r15+,r4
-
-div_ge64k:
- bt/s div_r8
- div0u
- shll8 r5
- bra div_ge64k_2
- div1 r5,r0
-udiv_ge64k:
- cmp/hi r0,r5
- mov r5,r1
- bt udiv_r8
- shll8 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
-div_ge64k_2:
- div1 r5,r0
- mov.l zero_l,r1
- .rept 4
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_end
- xor r4,r0
-
-div_r8:
- shll16 r4
- bra div_r8_2
- shll8 r4
-udiv_r8:
- mov.l r4,@-r15
- shll16 r4
- clrt
- shll8 r4
- mov.l r5,@-r15
-div_r8_2:
- rotcl r4
- mov r0,r1
- div1 r5,r1
- mov r4,r0
- rotcl r0
- mov r5,r4
- div1 r5,r1
- .rept 5
- rotcl r0; div1 r5,r1
- .endr
- rotcl r0
- mov.l @r15+,r5
- div1 r4,r1
- mov.l @r15+,r4
- rts
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
- .type __sdivsi3_i4i, @function
- /* This is link-compatible with a __sdivsi3 call,
- but we effectively clobber only r1. */
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.w c128_w, r1
- bt/s pos_divisor
- cmp/pz r4
- mov.l r5,@-r15
- neg r5,r5
- bt/s neg_result
- cmp/hi r1,r5
- neg r4,r4
-pos_result:
- extu.w r5,r0
- bf div_le128
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k
- cmp/hi r0,r5
- div0u
- shll16 r5
- div1 r5,r0
- div1 r5,r0
- div1 r5,r0
-udiv_25:
- mov.l zero_l,r1
- div1 r5,r0
- div1 r5,r0
- mov.l r1,@-r15
- .rept 3
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r0
- mov.l @r15+,r5
- or r4,r0
- mov.l @r15+,r4
- rts
- rotcl r0
-
-div_le128_neg:
- tst #0xfe,r0
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mova div_table_inv,r0
- bt/s div_by_1_neg
- mov.l @(r0,r1),r1
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- shld r1,r0
- rts
- neg r0,r0
-
-pos_divisor:
- mov.l r5,@-r15
- bt/s pos_result
- cmp/hi r1,r5
- neg r4,r4
-neg_result:
- extu.w r5,r0
- bf div_le128_neg
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k_neg
- cmp/hi r0,r5
- div0u
- mov.l zero_l,r1
- shll16 r5
- div1 r5,r0
- mov.l r1,@-r15
- .rept 7
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_neg_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r1
- mov.l @r15+,r5
- or r4,r1
-div_r8_neg_end:
- mov.l @r15+,r4
- rotcl r1
- rts
- neg r1,r0
-
-div_ge64k_neg:
- bt/s div_r8_neg
- div0u
- shll8 r5
- mov.l zero_l,r1
- .rept 6
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_neg_end
- xor r4,r0
-
-c128_w:
- .word 128
-
-div_r8_neg:
- clrt
- shll16 r4
- mov r4,r1
- shll8 r1
- mov r5,r4
- .rept 7
- rotcl r1; div1 r5,r0
- .endr
- mov.l @r15+,r5
- rotcl r1
- bra div_r8_neg_end
- div1 r4,r0
-
-m256_w:
- .word 0xff00
-/* This table has been generated by divtab-sh4.c. */
- .balign 4
-div_table_clz:
- .byte 0
- .byte 1
- .byte 0
- .byte -1
- .byte -1
- .byte -2
- .byte -2
- .byte -2
- .byte -2
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
-/* Lookup table translating positive divisor to index into table of
- normalized inverse. N.B. the '0' entry is also the last entry of the
- previous table, and causes an unaligned access for division by zero. */
-div_table_ix:
- .byte -6
- .byte -128
- .byte -128
- .byte 0
- .byte -128
- .byte -64
- .byte 0
- .byte 64
- .byte -128
- .byte -96
- .byte -64
- .byte -32
- .byte 0
- .byte 32
- .byte 64
- .byte 96
- .byte -128
- .byte -112
- .byte -96
- .byte -80
- .byte -64
- .byte -48
- .byte -32
- .byte -16
- .byte 0
- .byte 16
- .byte 32
- .byte 48
- .byte 64
- .byte 80
- .byte 96
- .byte 112
- .byte -128
- .byte -120
- .byte -112
- .byte -104
- .byte -96
- .byte -88
- .byte -80
- .byte -72
- .byte -64
- .byte -56
- .byte -48
- .byte -40
- .byte -32
- .byte -24
- .byte -16
- .byte -8
- .byte 0
- .byte 8
- .byte 16
- .byte 24
- .byte 32
- .byte 40
- .byte 48
- .byte 56
- .byte 64
- .byte 72
- .byte 80
- .byte 88
- .byte 96
- .byte 104
- .byte 112
- .byte 120
- .byte -128
- .byte -124
- .byte -120
- .byte -116
- .byte -112
- .byte -108
- .byte -104
- .byte -100
- .byte -96
- .byte -92
- .byte -88
- .byte -84
- .byte -80
- .byte -76
- .byte -72
- .byte -68
- .byte -64
- .byte -60
- .byte -56
- .byte -52
- .byte -48
- .byte -44
- .byte -40
- .byte -36
- .byte -32
- .byte -28
- .byte -24
- .byte -20
- .byte -16
- .byte -12
- .byte -8
- .byte -4
- .byte 0
- .byte 4
- .byte 8
- .byte 12
- .byte 16
- .byte 20
- .byte 24
- .byte 28
- .byte 32
- .byte 36
- .byte 40
- .byte 44
- .byte 48
- .byte 52
- .byte 56
- .byte 60
- .byte 64
- .byte 68
- .byte 72
- .byte 76
- .byte 80
- .byte 84
- .byte 88
- .byte 92
- .byte 96
- .byte 100
- .byte 104
- .byte 108
- .byte 112
- .byte 116
- .byte 120
- .byte 124
- .byte -128
-/* 1/64 .. 1/127, normalized. There is an implicit leading 1 in bit 32. */
- .balign 4
-zero_l:
- .long 0x0
- .long 0xF81F81F9
- .long 0xF07C1F08
- .long 0xE9131AC0
- .long 0xE1E1E1E2
- .long 0xDAE6076C
- .long 0xD41D41D5
- .long 0xCD856891
- .long 0xC71C71C8
- .long 0xC0E07039
- .long 0xBACF914D
- .long 0xB4E81B4F
- .long 0xAF286BCB
- .long 0xA98EF607
- .long 0xA41A41A5
- .long 0x9EC8E952
- .long 0x9999999A
- .long 0x948B0FCE
- .long 0x8F9C18FA
- .long 0x8ACB90F7
- .long 0x86186187
- .long 0x81818182
- .long 0x7D05F418
- .long 0x78A4C818
- .long 0x745D1746
- .long 0x702E05C1
- .long 0x6C16C16D
- .long 0x68168169
- .long 0x642C8591
- .long 0x60581606
- .long 0x5C9882BA
- .long 0x58ED2309
-div_table_inv:
- .long 0x55555556
- .long 0x51D07EAF
- .long 0x4E5E0A73
- .long 0x4AFD6A06
- .long 0x47AE147B
- .long 0x446F8657
- .long 0x41414142
- .long 0x3E22CBCF
- .long 0x3B13B13C
- .long 0x38138139
- .long 0x3521CFB3
- .long 0x323E34A3
- .long 0x2F684BDB
- .long 0x2C9FB4D9
- .long 0x29E4129F
- .long 0x27350B89
- .long 0x24924925
- .long 0x21FB7813
- .long 0x1F7047DD
- .long 0x1CF06ADB
- .long 0x1A7B9612
- .long 0x18118119
- .long 0x15B1E5F8
- .long 0x135C8114
- .long 0x11111112
- .long 0xECF56BF
- .long 0xC9714FC
- .long 0xA6810A7
- .long 0x8421085
- .long 0x624DD30
- .long 0x4104105
- .long 0x2040811
- /* maximum error: 0.987342 scaled: 0.921875*/
diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile
deleted file mode 100644
index ba06e42c4a58c9..00000000000000
--- a/arch/sh/math-emu/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := math.o
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
deleted file mode 100644
index cdaef6501d764a..00000000000000
--- a/arch/sh/math-emu/math.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * arch/sh/math-emu/math.c
- *
- * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <linux/perf_event.h>
-
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include "sfp-util.h"
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-#include <math-emu/double.h>
-
-#define FPUL (fregs->fpul)
-#define FPSCR (fregs->fpscr)
-#define FPSCR_RM (FPSCR&3)
-#define FPSCR_DN ((FPSCR>>18)&1)
-#define FPSCR_PR ((FPSCR>>19)&1)
-#define FPSCR_SZ ((FPSCR>>20)&1)
-#define FPSCR_FR ((FPSCR>>21)&1)
-#define FPSCR_MASK 0x003fffffUL
-
-#define BANK(n) (n^(FPSCR_FR?16:0))
-#define FR ((unsigned long*)(fregs->fp_regs))
-#define FR0 (FR[BANK(0)])
-#define FRn (FR[BANK(n)])
-#define FRm (FR[BANK(m)])
-#define DR ((unsigned long long*)(fregs->fp_regs))
-#define DRn (DR[BANK(n)/2])
-#define DRm (DR[BANK(m)/2])
-
-#define XREG(n) (n^16)
-#define XFn (FR[BANK(XREG(n))])
-#define XFm (FR[BANK(XREG(m))])
-#define XDn (DR[BANK(XREG(n))/2])
-#define XDm (DR[BANK(XREG(m))/2])
-
-#define R0 (regs->regs[0])
-#define Rn (regs->regs[n])
-#define Rm (regs->regs[m])
-
-#define MWRITE(d,a) ({if(put_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-#define MREAD(d,a) ({if(get_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-
-#define PACK_S(r,f) FP_PACK_SP(&r,f)
-#define UNPACK_S(f,r) FP_UNPACK_SP(f,&r)
-#define PACK_D(r,f) \
- {u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
-#define UNPACK_D(f,r) \
- {u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
-
-// 2 args instructions.
-#define BOTH_PRmn(op,x) \
- FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
-
-#define CMP_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
-#define EQ_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
-#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
-
-static int
-fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP) > 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
-
- return 0;
-}
-
-static int
-fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP /*EQ*/) == 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
- return 0;
-}
-
-#define ARITH_X(SZ,OP,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_##OP##_##SZ(Fr, Fn, Fm); \
- PACK_##SZ(N, Fr); }while(0)
-
-static int
-fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, ADD);
- return 0;
-}
-
-static int
-fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, SUB);
- return 0;
-}
-
-static int
-fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, MUL);
- return 0;
-}
-
-static int
-fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, DIV);
- return 0;
-}
-
-static int
-fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fr);
- FP_DECL_S(Ft);
- FP_DECL_S(F0);
- FP_DECL_S(Fm);
- FP_DECL_S(Fn);
- UNPACK_S(F0, FR0);
- UNPACK_S(Fm, FRm);
- UNPACK_S(Fn, FRn);
- FP_MUL_S(Ft, Fm, F0);
- FP_ADD_S(Fr, Fn, Ft);
- PACK_S(FRn, Fr);
- return 0;
-}
-
-// to process fmov's extension (odd n for DR access XD).
-#define FMOV_EXT(x) if(x&1) x+=16-1
-
-static int
-fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + R0 + 4);
- n++;
- MREAD(FRn, Rm + R0);
- } else {
- MREAD(FRn, Rm + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- } else {
- MREAD(FRn, Rm);
- }
-
- return 0;
-}
-
-static int
-fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- Rm += 8;
- } else {
- MREAD(FRn, Rm);
- Rm += 4;
- }
-
- return 0;
-}
-
-static int
-fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + R0 + 4);
- m++;
- MWRITE(FRm, Rn + R0);
- } else {
- MWRITE(FRm, Rn + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- Rn -= 8;
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- Rn -= 4;
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- FMOV_EXT(n);
- DRn = DRm;
- } else {
- FRn = FRm;
- }
-
- return 0;
-}
-
-static int
-fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- return -EINVAL;
-}
-
-// 1 arg instructions.
-#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
- { printk( #i " not yet done.\n"); return 0; }
-
-NOTYETn(ftrv)
-NOTYETn(fsqrt)
-NOTYETn(fipr)
-NOTYETn(fsca)
-NOTYETn(fsrra)
-
-#define EMU_FLOAT_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
- PACK_##SZ(N, Fn); }while(0)
-static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FLOAT_X(D, DRn);
- else
- EMU_FLOAT_X(S, FRn);
-
- return 0;
-}
-
-#define EMU_FTRC_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fn, N); \
- FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
-static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FTRC_X(D, DRn);
- else
- EMU_FTRC_X(S, FRn);
-
- return 0;
-}
-
-static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fn);
- FP_DECL_D(Fr);
- UNPACK_S(Fn, FPUL);
- FP_CONV(D, S, 2, 1, Fr, Fn);
- PACK_D(DRn, Fr);
- return 0;
-}
-
-static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_D(Fn);
- FP_DECL_S(Fr);
- UNPACK_D(Fn, DRn);
- FP_CONV(S, D, 1, 2, Fr, Fn);
- PACK_S(FPUL, Fr);
- return 0;
-}
-
-static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
-{
- FPSCR ^= flag;
- return 0;
-}
-
-static int fsts(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = FPUL;
- return 0;
-}
-
-static int flds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FPUL = FRn;
- return 0;
-}
-
-static int fneg(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fabs(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fld0(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = 0;
- return 0;
-}
-
-static int fld1(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
- return 0;
-}
-
-static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
-{
- return -EINVAL;
-}
-
-/// Instruction decoders.
-
-static int id_fxfd(struct sh_fpu_soft_struct *, int);
-static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
-
-static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
- fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
- fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
-};
-
-static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
- fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
- fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
- fmov_reg_reg, id_fnxd, fmac, fnop_mn};
-
-static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
-{
- const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
- switch (x & 3) {
- case 3:
- fxchg(fregs, flag[x >> 2]);
- break;
- case 1:
- ftrv(fregs, x - 1);
- break;
- default:
- fsca(fregs, x);
- }
- return 0;
-}
-
-static int
-id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
-{
- return (fnxd[x])(fregs, n);
-}
-
-static int
-id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
- return (fnmx[x])(fregs, regs, m, n);
-}
-
-static int
-id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = ((code >> 8) & 0xf);
- unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
-
- switch (code & 0xf0ff) {
- case 0x005a:
- case 0x006a:
- Rn = *reg;
- break;
- case 0x405a:
- case 0x406a:
- *reg = Rn;
- break;
- case 0x4052:
- case 0x4062:
- Rn -= 4;
- MWRITE(*reg, Rn);
- break;
- case 0x4056:
- case 0x4066:
- MREAD(*reg, Rn);
- Rn += 4;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
-{
- if ((code & 0xf000) == 0xf000)
- return id_fnmx(fregs, regs, code);
- else
- return id_sys(fregs, regs, code);
-}
-
-/**
- * fpu_init - Initialize FPU registers
- * @fpu: Pointer to software emulated FPU registers.
- */
-static void fpu_init(struct sh_fpu_soft_struct *fpu)
-{
- int i;
-
- fpu->fpscr = FPSCR_INIT;
- fpu->fpul = 0;
-
- for (i = 0; i < 16; i++) {
- fpu->fp_regs[i] = 0;
- fpu->xfp_regs[i]= 0;
- }
-}
-
-/**
- * do_fpu_inst - Handle reserved instructions for FPU emulation
- * @inst: instruction code.
- * @regs: registers on stack.
- */
-int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
- struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
-
- if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
- /* initialize once. */
- fpu_init(fpu);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- }
-
- return fpu_emulate(inst, fpu, regs);
-}
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
deleted file mode 100644
index 784f541344f36d..00000000000000
--- a/arch/sh/math-emu/sfp-util.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * These are copied from glibc/stdlib/longlong.h
- */
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) + (bl); \
- (sh) = (ah) + (bh) + (__x < (al)); \
- (sl) = __x; \
- } while (0)
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) - (bl); \
- (sh) = (ah) - (bh) - (__x > (al)); \
- (sl) = __x; \
- } while (0)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
- : "=r" ((u32)(w1)), "=r" ((u32)(w0)) \
- : "r" ((u32)(u)), "r" ((u32)(v)) \
- : "macl", "mach")
-
-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-#define udiv_qrnnd(q, r, n1, n0, d) \
- do { \
- UWtype __d1, __d0, __q1, __q0; \
- UWtype __r1, __r0, __m; \
- __d1 = __ll_highpart (d); \
- __d0 = __ll_lowpart (d); \
- \
- __r1 = (n1) % __d1; \
- __q1 = (n1) / __d1; \
- __m = (UWtype) __q1 * __d0; \
- __r1 = __r1 * __ll_B | __ll_highpart (n0); \
- if (__r1 < __m) \
- { \
- __q1--, __r1 += (d); \
- if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
- if (__r1 < __m) \
- __q1--, __r1 += (d); \
- } \
- __r1 -= __m; \
- \
- __r0 = __r1 % __d1; \
- __q0 = __r1 / __d1; \
- __m = (UWtype) __q0 * __d0; \
- __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
- if (__r0 < __m) \
- { \
- __q0--, __r0 += (d); \
- if (__r0 >= (d)) \
- if (__r0 < __m) \
- __q0--, __r0 += (d); \
- } \
- __r0 -= __m; \
- \
- (q) = (UWtype) __q1 * __ll_B | __q0; \
- (r) = __r0; \
- } while (0)
-
-#define abort() return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
deleted file mode 100644
index 411fdc0901f7ea..00000000000000
--- a/arch/sh/mm/Kconfig
+++ /dev/null
@@ -1,254 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Memory management options"
-
-config MMU
- bool "Support for memory management hardware"
- depends on !CPU_SH2
- default y
- help
- Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
- boot on these systems, this option must not be set.
-
- On other systems (such as the SH-3 and 4) where an MMU exists,
- turning this off will boot the kernel on these machines with the
- MMU implicitly switched off.
-
-config PAGE_OFFSET
- hex
- default "0x80000000" if MMU
- default "0x00000000"
-
-config ARCH_FORCE_MAX_ORDER
- int "Maximum zone order"
- range 9 64 if PAGE_SIZE_16KB
- default "9" if PAGE_SIZE_16KB
- range 7 64 if PAGE_SIZE_64KB
- default "7" if PAGE_SIZE_64KB
- range 11 64
- default "14" if !MMU
- default "11"
- help
- The kernel memory allocator divides physically contiguous memory
- blocks into "zones", where each zone is a power of two number of
- pages. This option selects the largest power of two that the kernel
- keeps in the memory allocator. If you need to allocate very large
- blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
-
- The page size is not necessarily 4KB. Keep this in mind when
- choosing a value for this option.
-
-config MEMORY_START
- hex "Physical memory start address"
- default "0x08000000"
- help
- Computers built with Hitachi SuperH processors always
- map the ROM starting at address zero. But the processor
- does not specify the range that RAM takes.
-
- The physical memory (RAM) start address will be automatically
- set to 08000000. Other platforms, such as the Solution Engine
- boards typically map RAM at 0C000000.
-
- Tweak this only when porting to a new machine which does not
- already have a defconfig. Changing it from the known correct
- value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
- hex "Physical memory size"
- default "0x04000000"
- help
- This sets the default memory size assumed by your SH kernel. It can
- be overridden as normal by the 'mem=' argument on the kernel command
- line. If unsure, consult your board specifications or just leave it
- as 0x04000000 which was the default value before this became
- configurable.
-
-# Physical addressing modes
-
-config 29BIT
- def_bool !32BIT
- select UNCACHED_MAPPING
-
-config 32BIT
- bool
- default !MMU
-
-config PMB
- bool "Support 32-bit physical addressing through PMB"
- depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
- select 32BIT
- select UNCACHED_MAPPING
- help
- If you say Y here, physical addressing will be extended to
- 32-bits through the SH-4A PMB. If this is not set, legacy
- 29-bit physical addressing will be used.
-
-config X2TLB
- def_bool y
- depends on (CPU_SHX2 || CPU_SHX3) && MMU
-
-config VSYSCALL
- bool "Support vsyscall page"
- depends on MMU && (CPU_SH3 || CPU_SH4)
- default y
- help
- This will enable support for the kernel mapping a vDSO page
- in process space, and subsequently handing down the entry point
- to the libc through the ELF auxiliary vector.
-
- From the kernel side this is used for the signal trampoline.
- For systems with an MMU that can afford to give up a page,
- (the default value) say Y.
-
-config NUMA
- bool "Non-Uniform Memory Access (NUMA) Support"
- depends on MMU && SYS_SUPPORTS_NUMA
- select ARCH_WANT_NUMA_VARIABLE_LOCALITY
- default n
- help
- Some SH systems have many various memories scattered around
- the address space, each with varying latencies. This enables
- support for these blocks by binding them to nodes and allowing
- memory policies to be used for prioritizing and controlling
- allocation behaviour.
-
-config NODES_SHIFT
- int
- default "3" if CPU_SUBTYPE_SHX3
- default "1"
- depends on NUMA
-
-config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on !NUMA
-
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
-config ARCH_SPARSEMEM_DEFAULT
- def_bool y
-
-config ARCH_SELECT_MEMORY_MODEL
- def_bool y
-
-config ARCH_MEMORY_PROBE
- def_bool y
- depends on MEMORY_HOTPLUG
-
-config IOREMAP_FIXED
- def_bool y
- depends on X2TLB
-
-config UNCACHED_MAPPING
- bool
-
-config HAVE_SRAM_POOL
- bool
- select GENERIC_ALLOCATOR
-
-choice
- prompt "Kernel page size"
- default PAGE_SIZE_4KB
-
-config PAGE_SIZE_4KB
- bool "4kB"
- help
- This is the default page size used by all SuperH CPUs.
-
-config PAGE_SIZE_8KB
- bool "8kB"
- depends on !MMU || X2TLB
- help
- This enables 8kB pages as supported by SH-X2 and later MMUs.
-
-config PAGE_SIZE_16KB
- bool "16kB"
- depends on !MMU
- help
- This enables 16kB pages on MMU-less SH systems.
-
-config PAGE_SIZE_64KB
- bool "64kB"
- depends on !MMU || CPU_SH4
- help
- This enables support for 64kB pages, possible on all SH-4
- CPUs and later.
-
-endchoice
-
-choice
- prompt "HugeTLB page size"
- depends on HUGETLB_PAGE
- default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
- default HUGETLB_PAGE_SIZE_64K
-
-config HUGETLB_PAGE_SIZE_64K
- bool "64kB"
- depends on !PAGE_SIZE_64KB
-
-config HUGETLB_PAGE_SIZE_256K
- bool "256kB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_1MB
- bool "1MB"
-
-config HUGETLB_PAGE_SIZE_4MB
- bool "4MB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_64MB
- bool "64MB"
- depends on X2TLB
-
-endchoice
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-endmenu
-
-menu "Cache configuration"
-
-config SH7705_CACHE_32KB
- bool "Enable 32KB cache size for SH7705"
- depends on CPU_SUBTYPE_SH7705
- default y
-
-choice
- prompt "Cache mode"
- default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
- default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
-
-config CACHE_WRITEBACK
- bool "Write-back"
-
-config CACHE_WRITETHROUGH
- bool "Write-through"
- help
- Selecting this option will configure the caches in write-through
- mode, as opposed to the default write-back configuration.
-
- Since there's sill some aliasing issues on SH-4, this option will
- unfortunately still require the majority of flushing functions to
- be implemented to deal with aliasing.
-
- If unsure, say N.
-
-config CACHE_OFF
- bool "Off"
-
-endchoice
-
-endmenu
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
deleted file mode 100644
index f69ddc70b14658..00000000000000
--- a/arch/sh/mm/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y := alignment.o cache.o init.o consistent.o mmap.o
-
-cacheops-$(CONFIG_CPU_J2) := cache-j2.o
-cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o
-cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
-cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
-cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
-cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o
-
-obj-y += $(cacheops-y)
-
-mmu-y := nommu.o extable_32.o
-mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \
- pgtable.o tlbex_32.o tlbflush_32.o
-
-obj-y += $(mmu-y)
-
-debugfs-y := asids-debugfs.o
-ifndef CONFIG_CACHE_OFF
-debugfs-$(CONFIG_CPU_SH4) += cache-debugfs.o
-endif
-
-ifdef CONFIG_MMU
-debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o
-tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
-obj-y += $(tlb-y)
-endif
-
-obj-$(CONFIG_DEBUG_FS) += $(debugfs-y)
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PMB) += pmb.o
-obj-$(CONFIG_NUMA) += numa.o
-obj-$(CONFIG_IOREMAP_FIXED) += ioremap_fixed.o
-obj-$(CONFIG_UNCACHED_MAPPING) += uncached.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
-
-GCOV_PROFILE_pmb.o := n
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
deleted file mode 100644
index 3a76a766f4232c..00000000000000
--- a/arch/sh/mm/alignment.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Alignment access counters and corresponding user-space interfaces.
- *
- * Copyright (C) 2009 ST Microelectronics
- * Copyright (C) 2009 - 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-#include <linux/ratelimit.h>
-#include <asm/alignment.h>
-#include <asm/processor.h>
-
-static unsigned long se_user;
-static unsigned long se_sys;
-static unsigned long se_half;
-static unsigned long se_word;
-static unsigned long se_dword;
-static unsigned long se_multi;
-/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
- valid! */
-static int se_usermode = UM_WARN | UM_FIXUP;
-/* 0: no warning 1: print a warning message, disabled by default */
-static int se_kernmode_warn;
-
-core_param(alignment, se_usermode, int, 0600);
-
-void inc_unaligned_byte_access(void)
-{
- se_half++;
-}
-
-void inc_unaligned_word_access(void)
-{
- se_word++;
-}
-
-void inc_unaligned_dword_access(void)
-{
- se_dword++;
-}
-
-void inc_unaligned_multi_access(void)
-{
- se_multi++;
-}
-
-void inc_unaligned_user_access(void)
-{
- se_user++;
-}
-
-void inc_unaligned_kernel_access(void)
-{
- se_sys++;
-}
-
-/*
- * This defaults to the global policy which can be set from the command
- * line, while processes can overload their preferences via prctl().
- */
-unsigned int unaligned_user_action(void)
-{
- unsigned int action = se_usermode;
-
- if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
- action &= ~UM_FIXUP;
- action |= UM_SIGNAL;
- }
-
- if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
- action &= ~UM_WARN;
-
- return action;
-}
-
-int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
-{
- return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
- (unsigned int __user *)addr);
-}
-
-int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
-{
- tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
- (val & SH_THREAD_UAC_MASK);
- return 0;
-}
-
-void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
- struct pt_regs *regs)
-{
- if (user_mode(regs) && (se_usermode & UM_WARN))
- pr_notice_ratelimited("Fixing up unaligned userspace access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
- else if (se_kernmode_warn)
- pr_notice_ratelimited("Fixing up unaligned kernel access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
-}
-
-static const char *se_usermode_action[] = {
- "ignored",
- "warn",
- "fixup",
- "fixup+warn",
- "signal",
- "signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "User:\t\t%lu\n", se_user);
- seq_printf(m, "System:\t\t%lu\n", se_sys);
- seq_printf(m, "Half:\t\t%lu\n", se_half);
- seq_printf(m, "Word:\t\t%lu\n", se_word);
- seq_printf(m, "DWord:\t\t%lu\n", se_dword);
- seq_printf(m, "Multi:\t\t%lu\n", se_multi);
- seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
- se_usermode_action[se_usermode]);
- seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
- se_kernmode_warn ? "+warn" : "");
- return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file,
- const char __user *buffer, size_t count, loff_t *pos)
-{
- int *data = pde_data(file_inode(file));
- char mode;
-
- if (count > 0) {
- if (get_user(mode, buffer))
- return -EFAULT;
- if (mode >= '0' && mode <= '5')
- *data = mode - '0';
- }
- return count;
-}
-
-static const struct proc_ops alignment_proc_ops = {
- .proc_open = alignment_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = alignment_proc_write,
-};
-
-/*
- * This needs to be done after sysctl_init_bases(), otherwise sys/ will be
- * overwritten. Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
- struct proc_dir_entry *dir, *res;
-
- dir = proc_mkdir("cpu", NULL);
- if (!dir)
- return -ENOMEM;
-
- res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_usermode);
- if (!res)
- return -ENOMEM;
-
- res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_kernmode_warn);
- if (!res)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(alignment_init);
diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c
deleted file mode 100644
index d16d6f5ec77499..00000000000000
--- a/arch/sh/mm/asids-debugfs.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * debugfs ops for process ASIDs
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2008 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- * Provides a debugfs file that lists out the ASIDs currently associated
- * with the processes.
- *
- * In the SH-5 case, if the DM.PC register is examined through the debug
- * link, this shows ASID + PC. To make use of this, the PID->ASID
- * relationship needs to be known. This is primarily for debugging.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-
-static int asids_debugfs_show(struct seq_file *file, void *iter)
-{
- struct task_struct *p;
-
- read_lock(&tasklist_lock);
-
- for_each_process(p) {
- int pid = p->pid;
-
- if (unlikely(!pid))
- continue;
-
- if (p->mm)
- seq_printf(file, "%5d : %04lx\n", pid,
- cpu_asid(smp_processor_id(), p->mm));
- }
-
- read_unlock(&tasklist_lock);
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(asids_debugfs);
-
-static int __init asids_debugfs_init(void)
-{
- debugfs_create_file("asids", S_IRUSR, arch_debugfs_dir, NULL,
- &asids_debugfs_fops);
- return 0;
-}
-device_initcall(asids_debugfs_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
deleted file mode 100644
index b0f185169dfa0c..00000000000000
--- a/arch/sh/mm/cache-debugfs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * debugfs ops for the L1 cache
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-enum cache_type {
- CACHE_TYPE_ICACHE,
- CACHE_TYPE_DCACHE,
- CACHE_TYPE_UNIFIED,
-};
-
-static int cache_debugfs_show(struct seq_file *file, void *iter)
-{
- unsigned int cache_type = (unsigned int)file->private;
- struct cache_info *cache;
- unsigned int waysize, way;
- unsigned long ccr;
- unsigned long addrstart = 0;
-
- /*
- * Go uncached immediately so we don't skew the results any
- * more than we already are..
- */
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- if ((ccr & CCR_CACHE_ENABLE) == 0) {
- back_to_cached();
-
- seq_printf(file, "disabled\n");
- return 0;
- }
-
- if (cache_type == CACHE_TYPE_DCACHE) {
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.dcache;
- } else {
- addrstart = CACHE_IC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.icache;
- }
-
- waysize = cache->sets;
-
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to consider..
- */
- if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
- waysize >>= 1;
-
- waysize <<= cache->entry_shift;
-
- for (way = 0; way < cache->ways; way++) {
- unsigned long addr;
- unsigned int line;
-
- seq_printf(file, "-----------------------------------------\n");
- seq_printf(file, "Way %d\n", way);
- seq_printf(file, "-----------------------------------------\n");
-
- for (addr = addrstart, line = 0;
- addr < addrstart + waysize;
- addr += cache->linesz, line++) {
- unsigned long data = __raw_readl(addr);
-
- /* Check the V bit, ignore invalid cachelines */
- if ((data & 1) == 0)
- continue;
-
- /* U: Dirty, cache tag is 10 bits up */
- seq_printf(file, "%3d: %c 0x%lx\n",
- line, data & 2 ? 'U' : ' ',
- data & 0x1ffffc00);
- }
-
- addrstart += cache->way_incr;
- }
-
- back_to_cached();
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(cache_debugfs);
-
-static int __init cache_debugfs_init(void)
-{
- debugfs_create_file("dcache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_DCACHE, &cache_debugfs_fops);
- debugfs_create_file("icache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_ICACHE, &cache_debugfs_fops);
- return 0;
-}
-module_init(cache_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/cache-j2.c b/arch/sh/mm/cache-j2.c
deleted file mode 100644
index f277862a11f530..00000000000000
--- a/arch/sh/mm/cache-j2.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-j2.c
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/cpumask.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-#define ICACHE_ENABLE 0x1
-#define DCACHE_ENABLE 0x2
-#define CACHE_ENABLE (ICACHE_ENABLE | DCACHE_ENABLE)
-#define ICACHE_FLUSH 0x100
-#define DCACHE_FLUSH 0x200
-#define CACHE_FLUSH (ICACHE_FLUSH | DCACHE_FLUSH)
-
-u32 __iomem *j2_ccr_base;
-
-static void j2_flush_icache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | ICACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_dcache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | DCACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_both(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | CACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-void __init j2_cache_init(void)
-{
- if (!j2_ccr_base)
- return;
-
- local_flush_cache_all = j2_flush_both;
- local_flush_cache_mm = j2_flush_both;
- local_flush_cache_dup_mm = j2_flush_both;
- local_flush_cache_page = j2_flush_both;
- local_flush_cache_range = j2_flush_both;
- local_flush_dcache_page = j2_flush_dcache;
- local_flush_icache_range = j2_flush_icache;
- local_flush_icache_page = j2_flush_icache;
- local_flush_cache_sigtramp = j2_flush_icache;
-
- pr_info("Initial J2 CCR is %.8x\n", __raw_readl(j2_ccr_base));
-}
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
deleted file mode 100644
index f2b6cdbdf9320d..00000000000000
--- a/arch/sh/mm/cache-sh2.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2.c
- *
- * Copyright (C) 2002 Paul Mundt
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-static void sh2__flush_wback_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
- int way;
- for (way = 0; way < 4; way++) {
- unsigned long data = __raw_readl(addr | (way << 12));
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr | (way << 12));
- }
- }
- }
-}
-
-static void sh2__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-}
-
-static void sh2__flush_invalidate_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- /*
- * SH-2 does not support individual line invalidation, only a
- * global invalidate.
- */
- unsigned long ccr;
- unsigned long flags;
- local_irq_save(flags);
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_INVALIDATE;
- __raw_writel(ccr, SH_CCR);
-
- back_to_cached();
- local_irq_restore(flags);
-#else
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-#endif
-}
-
-void __init sh2_cache_init(void)
-{
- __flush_wback_region = sh2__flush_wback_region;
- __flush_purge_region = sh2__flush_purge_region;
- __flush_invalidate_region = sh2__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
deleted file mode 100644
index 4f7739e707a7e9..00000000000000
--- a/arch/sh/mm/cache-sh2a.c
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2a.c
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_OCACHE_PAGES 32
-#define MAX_ICACHE_PAGES 32
-
-#ifdef CONFIG_CACHE_WRITEBACK
-static void sh2a_flush_oc_line(unsigned long v, int way)
-{
- unsigned long addr = (v & 0x000007f0) | (way << 11);
- unsigned long data;
-
- data = __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr);
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
- }
-}
-#endif
-
-static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
-{
- /* Set associative bit to hit all ways */
- unsigned long addr = (v & 0x000007f0) | SH_CACHE_ASSOC;
- __raw_writel((addr & CACHE_PHYSADDR_MASK), cache_addr | addr);
-}
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- */
-static void sh2a__flush_wback_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
- int nr_ways;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- nr_ways = current_cpu_data.dcache.ways;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then flush the entire cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- begin = CACHE_OC_ADDRESS_ARRAY;
- end = begin + (nr_ways * current_cpu_data.dcache.way_size);
-
- for (v = begin; v < end; v += L1_CACHE_BYTES) {
- unsigned long data = __raw_readl(v);
- if (data & SH_CACHE_UPDATED)
- __raw_writel(data & ~SH_CACHE_UPDATED, v);
- }
- } else {
- int way;
- for (way = 0; way < nr_ways; way++) {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_flush_oc_line(v, way);
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-#endif
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- */
-static void sh2a__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-#ifdef CONFIG_CACHE_WRITEBACK
- int way;
- int nr_ways = current_cpu_data.dcache.ways;
- for (way = 0; way < nr_ways; way++)
- sh2a_flush_oc_line(v, way);
-#endif
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Invalidate the D-caches, but no write back please
- */
-static void sh2a__flush_invalidate_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then just blow the cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- */
-static void sh2a_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long v;
- unsigned long flags;
-
- start = data->addr1 & ~(L1_CACHE_BYTES-1);
- end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
-
-#ifdef CONFIG_CACHE_WRITEBACK
- sh2a__flush_wback_region((void *)start, end-start);
-#endif
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* I-Cache invalidate */
- /* If there are too many pages then just blow the cache */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = start; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-void __init sh2a_cache_init(void)
-{
- local_flush_icache_range = sh2a_flush_icache_range;
-
- __flush_wback_region = sh2a__flush_wback_region;
- __flush_purge_region = sh2a__flush_purge_region;
- __flush_invalidate_region = sh2a__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
deleted file mode 100644
index bc595982d396ee..00000000000000
--- a/arch/sh/mm/cache-sh3.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh3.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * Is this really worth it, or should we just alias this routine
- * to __flush_purge_region too?
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-
-static void sh3__flush_wback_region(void *start, int size)
-{
- unsigned long v, j;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY;
- for (j = 0; j < current_cpu_data.dcache.ways; j++) {
- unsigned long data, addr, p;
-
- p = __pa(v);
- addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
- local_irq_save(flags);
- data = __raw_readl(addr);
-
- if ((data & CACHE_PHYSADDR_MASK) ==
- (p & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr);
- local_irq_restore(flags);
- break;
- }
- local_irq_restore(flags);
- addrstart += current_cpu_data.dcache.way_incr;
- }
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh3__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long data, addr;
-
- data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
- addr = CACHE_OC_ADDRESS_ARRAY |
- (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
- __raw_writel(data, addr);
- }
-}
-
-void __init sh3_cache_init(void)
-{
- __flush_wback_region = sh3__flush_wback_region;
- __flush_purge_region = sh3__flush_purge_region;
-
- /*
- * No write back please
- *
- * Except I don't think there's any way to avoid the writeback.
- * So we just alias it to sh3__flush_purge_region(). dwmw2.
- */
- __flush_invalidate_region = sh3__flush_purge_region;
-}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
deleted file mode 100644
index 72c2e1b46c0838..00000000000000
--- a/arch/sh/mm/cache-sh4.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * arch/sh/mm/cache-sh4.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_ICACHE_PAGES 32
-
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset);
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format,
- * signal handler code and kprobes code
- */
-static void sh4_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long flags, v;
- int i;
-
- start = data->addr1;
- end = data->addr2;
-
- /* If there are too many pages then just blow away the caches */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- local_flush_cache_all(NULL);
- return;
- }
-
- /*
- * Selectively flush d-cache then invalidate the i-cache.
- * This is inefficient, so only use this for small ranges.
- */
- start &= ~(L1_CACHE_BYTES-1);
- end += L1_CACHE_BYTES-1;
- end &= ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = start; v < end; v += L1_CACHE_BYTES) {
- unsigned long icacheaddr;
- int j, n;
-
- __ocbwb(v);
-
- icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
- cpu_data->icache.entry_mask);
-
- /* Clear i-cache line valid-bit */
- n = boot_cpu_data.icache.n_aliases;
- for (i = 0; i < cpu_data->icache.ways; i++) {
- for (j = 0; j < n; j++)
- __raw_writel(0, icacheaddr + (j * PAGE_SIZE));
- icacheaddr += cpu_data->icache.way_incr;
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static inline void flush_cache_one(unsigned long start, unsigned long phys)
-{
- unsigned long flags, exec_offset = 0;
-
- /*
- * All types of SH-4 require PC to be uncached to operate on the I-cache.
- * Some types of SH-4 require PC to be uncached to operate on the D-cache.
- */
- if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
- (start < CACHE_OC_ADDRESS_ARRAY))
- exec_offset = cached_to_uncached;
-
- local_irq_save(flags);
- __flush_cache_one(start, phys, exec_offset);
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh4_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- unsigned long addr = (unsigned long)page_address(page);
-#ifndef CONFIG_SMP
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
-#endif
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (addr & shm_align_mask), page_to_phys(page));
-
- wmb();
-}
-
-/* TODO: Selective icache invalidation through IC address array.. */
-static void flush_icache_all(void)
-{
- unsigned long flags, ccr;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* Flush I-cache */
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_ICI;
- __raw_writel(ccr, SH_CCR);
-
- /*
- * back_to_cached() will take care of the barrier for us, don't add
- * another one!
- */
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static void flush_dcache_all(void)
-{
- unsigned long addr, end_addr, entry_offset;
-
- end_addr = CACHE_OC_ADDRESS_ARRAY +
- (current_cpu_data.dcache.sets <<
- current_cpu_data.dcache.entry_shift) *
- current_cpu_data.dcache.ways;
-
- entry_offset = 1 << current_cpu_data.dcache.entry_shift;
-
- for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- }
-}
-
-static void sh4_flush_cache_all(void *unused)
-{
- flush_dcache_all();
- flush_icache_all();
-}
-
-/*
- * Note : (RPC) since the caches are physically tagged, the only point
- * of flush_cache_mm for SH-4 is to get rid of aliases from the
- * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that
- * lines can stay resident so long as the virtual address they were
- * accessed with (hence cache set) is in accord with the physical
- * address (i.e. tag). It's no different here.
- *
- * Caller takes mm->mmap_lock.
- */
-static void sh4_flush_cache_mm(void *arg)
-{
- struct mm_struct *mm = arg;
-
- if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
- return;
-
- flush_dcache_all();
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDR: Virtual Address (U0 address)
- * PFN: Physical page number
- */
-static void sh4_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- struct page *page;
- unsigned long address, pfn, phys;
- int map_coherent = 0;
- pmd_t *pmd;
- pte_t *pte;
- void *vaddr;
-
- vma = data->vma;
- address = data->addr1 & PAGE_MASK;
- pfn = data->addr2;
- phys = pfn << PAGE_SHIFT;
- page = pfn_to_page(pfn);
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- pmd = pmd_off(vma->vm_mm, address);
- pte = pte_offset_kernel(pmd, address);
-
- /* If the page isn't present, there is nothing to do here. */
- if (!(pte_val(*pte) & _PAGE_PRESENT))
- return;
-
- if ((vma->vm_mm == current->active_mm))
- vaddr = NULL;
- else {
- /*
- * Use kmap_coherent or kmap_atomic to do flushes for
- * another ASID than the current one.
- */
- map_coherent = (current_cpu_data.dcache.n_aliases &&
- test_bit(PG_dcache_clean, &page->flags) &&
- page_mapcount(page));
- if (map_coherent)
- vaddr = kmap_coherent(page, address);
- else
- vaddr = kmap_atomic(page);
-
- address = (unsigned long)vaddr;
- }
-
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (address & shm_align_mask), phys);
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-
- if (vaddr) {
- if (map_coherent)
- kunmap_coherent(vaddr);
- else
- kunmap_atomic(vaddr);
- }
-}
-
-/*
- * Write back and invalidate D-caches.
- *
- * START, END: Virtual Address (U0 address)
- *
- * NOTE: We need to flush the _physical_ page entry.
- * Flushing the cache lines for U0 only isn't enough.
- * We need to flush for P1 too, which may contain aliases.
- */
-static void sh4_flush_cache_range(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long start, end;
-
- vma = data->vma;
- start = data->addr1;
- end = data->addr2;
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- /*
- * If cache is only 4k-per-way, there are never any 'aliases'. Since
- * the cache is physically tagged, the data can just be left in there.
- */
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- flush_dcache_all();
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-}
-
-/**
- * __flush_cache_one
- *
- * @addr: address in memory mapped cache array
- * @phys: P1 address to flush (has to match tags if addr has 'A' bit
- * set i.e. associative write)
- * @exec_offset: set to 0x20000000 if flush has to be executed from P2
- * region else 0x0
- *
- * The offset into the cache array implied by 'addr' selects the
- * 'colour' of the virtual address range that will be flushed. The
- * operation (purge/write-back) is selected by the lower 2 bits of
- * 'phys'.
- */
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset)
-{
- int way_count;
- unsigned long base_addr = addr;
- struct cache_info *dcache;
- unsigned long way_incr;
- unsigned long a, ea, p;
- unsigned long temp_pc;
-
- dcache = &boot_cpu_data.dcache;
- /* Write this way for better assembly. */
- way_count = dcache->ways;
- way_incr = dcache->way_incr;
-
- /*
- * Apply exec_offset (i.e. branch to P2 if required.).
- *
- * FIXME:
- *
- * If I write "=r" for the (temp_pc), it puts this in r6 hence
- * trashing exec_offset before it's been added on - why? Hence
- * "=&r" as a 'workaround'
- */
- asm volatile("mov.l 1f, %0\n\t"
- "add %1, %0\n\t"
- "jmp @%0\n\t"
- "nop\n\t"
- ".balign 4\n\t"
- "1: .long 2f\n\t"
- "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
-
- /*
- * We know there will be >=1 iteration, so write as do-while to avoid
- * pointless nead-of-loop check for 0 iterations.
- */
- do {
- ea = base_addr + PAGE_SIZE;
- a = base_addr;
- p = phys;
-
- do {
- *(volatile unsigned long *)a = p;
- /*
- * Next line: intentionally not p+32, saves an add, p
- * will do since only the cache tag bits need to
- * match.
- */
- *(volatile unsigned long *)(a+32) = p;
- a += 64;
- p += 64;
- } while (a < ea);
-
- base_addr += way_incr;
- } while (--way_count != 0);
-}
-
-extern void __weak sh4__flush_region_init(void);
-
-/*
- * SH-4 has virtually indexed and physically tagged cache.
- */
-void __init sh4_cache_init(void)
-{
- printk("PVR=%08x CVR=%08x PRR=%08x\n",
- __raw_readl(CCN_PVR),
- __raw_readl(CCN_CVR),
- __raw_readl(CCN_PRR));
-
- local_flush_icache_range = sh4_flush_icache_range;
- local_flush_dcache_page = sh4_flush_dcache_page;
- local_flush_cache_all = sh4_flush_cache_all;
- local_flush_cache_mm = sh4_flush_cache_mm;
- local_flush_cache_dup_mm = sh4_flush_cache_mm;
- local_flush_cache_page = sh4_flush_cache_page;
- local_flush_cache_range = sh4_flush_cache_range;
-
- sh4__flush_region_init();
-}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
deleted file mode 100644
index 9b63a53a5e46fe..00000000000000
--- a/arch/sh/mm/cache-sh7705.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * arch/sh/mm/cache-sh7705.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2004 Alex Song
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/pagemap.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * The 32KB cache on the SH7705 suffers from the same synonym problem
- * as SH4 CPUs
- */
-static inline void cache_wback_all(void)
-{
- unsigned long ways, waysize, addrstart;
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
- int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
-
- data = __raw_readl(addr);
-
- if ((data & v) == v)
- __raw_writel(data & ~v, addr);
-
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
- */
-static void sh7705_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
-
- start = data->addr1;
- end = data->addr2;
-
- __flush_wback_region((void *)start, end - start);
-}
-
-/*
- * Writeback&Invalidate the D-cache of the page
- */
-static void __flush_dcache_page(unsigned long phys)
-{
- unsigned long ways, waysize, addrstart;
- unsigned long flags;
-
- phys |= SH_CACHE_VALID;
-
- /*
- * Here, phys is the physical address of the page. We check all the
- * tags in the cache for those with the same page number as this page
- * (by masking off the lowest 2 bits of the 19-bit tag; these bits are
- * derived from the offset within in the 4k page). Matching valid
- * entries are invalidated.
- *
- * Since 2 bits of the cache index are derived from the virtual page
- * number, knowing this would reduce the number of cache entries to be
- * searched by a factor of 4. However this function exists to deal with
- * potential cache aliasing, therefore the optimisation is probably not
- * possible.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
-
- data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
- if (data == phys) {
- data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
- __raw_writel(data, addr);
- }
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh7705_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
- __flush_dcache_page(__pa(page_address(page)));
-}
-
-static void sh7705_flush_cache_all(void *args)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- cache_wback_all();
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDRESS: Virtual Address (U0 address)
- */
-static void sh7705_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- unsigned long pfn = data->addr2;
-
- __flush_dcache_page(pfn << PAGE_SHIFT);
-}
-
-/*
- * This is called when a page-cache page is about to be mapped into a
- * user process' address space. It offers an opportunity for a
- * port to ensure d-cache/i-cache coherency if necessary.
- *
- * Not entirely sure why this is necessary on SH3 with 32K cache but
- * without it we get occasional "Memory fault" when loading a program.
- */
-static void sh7705_flush_icache_page(void *page)
-{
- __flush_purge_region(page_address(page), PAGE_SIZE);
-}
-
-void __init sh7705_cache_init(void)
-{
- local_flush_icache_range = sh7705_flush_icache_range;
- local_flush_dcache_page = sh7705_flush_dcache_page;
- local_flush_cache_all = sh7705_flush_cache_all;
- local_flush_cache_mm = sh7705_flush_cache_all;
- local_flush_cache_dup_mm = sh7705_flush_cache_all;
- local_flush_cache_range = sh7705_flush_cache_all;
- local_flush_cache_page = sh7705_flush_cache_page;
- local_flush_icache_page = sh7705_flush_icache_page;
-}
diff --git a/arch/sh/mm/cache-shx3.c b/arch/sh/mm/cache-shx3.c
deleted file mode 100644
index 24c58b7dc02265..00000000000000
--- a/arch/sh/mm/cache-shx3.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/sh/mm/cache-shx3.c - SH-X3 optimized cache ops
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/cache.h>
-
-#define CCR_CACHE_SNM 0x40000 /* Hardware-assisted synonym avoidance */
-#define CCR_CACHE_IBE 0x1000000 /* ICBI broadcast */
-
-void __init shx3_cache_init(void)
-{
- unsigned int ccr;
-
- ccr = __raw_readl(SH_CCR);
-
- /*
- * If we've got cache aliases, resolve them in hardware.
- */
- if (boot_cpu_data.dcache.n_aliases || boot_cpu_data.icache.n_aliases) {
- ccr |= CCR_CACHE_SNM;
-
- boot_cpu_data.icache.n_aliases = 0;
- boot_cpu_data.dcache.n_aliases = 0;
-
- pr_info("Enabling hardware synonym avoidance\n");
- }
-
-#ifdef CONFIG_SMP
- /*
- * Broadcast I-cache block invalidations by default.
- */
- ccr |= CCR_CACHE_IBE;
-#endif
-
- writel_uncached(ccr, SH_CCR);
-}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
deleted file mode 100644
index 3aef78ceb82090..00000000000000
--- a/arch/sh/mm/cache.c
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void (*local_flush_cache_all)(void *args) = cache_noop;
-void (*local_flush_cache_mm)(void *args) = cache_noop;
-void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
-void (*local_flush_cache_page)(void *args) = cache_noop;
-void (*local_flush_cache_range)(void *args) = cache_noop;
-void (*local_flush_dcache_page)(void *args) = cache_noop;
-void (*local_flush_icache_range)(void *args) = cache_noop;
-void (*local_flush_icache_page)(void *args) = cache_noop;
-void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
-
-void (*__flush_wback_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_wback_region);
-void (*__flush_purge_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_purge_region);
-void (*__flush_invalidate_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_invalidate_region);
-
-static inline void noop__flush_region(void *start, int size)
-{
-}
-
-static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
- int wait)
-{
- preempt_disable();
-
- /* Needing IPI for cross-core flush is SHX3-specific. */
-#ifdef CONFIG_CPU_SHX3
- /*
- * It's possible that this gets called early on when IRQs are
- * still disabled due to ioremapping by the boot CPU, so don't
- * even attempt IPIs unless there are other CPUs online.
- */
- if (num_online_cpus() > 1)
- smp_call_function(func, info, wait);
-#endif
-
- func(info);
-
- preempt_enable();
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
- kunmap_coherent(vto);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-
- if (vma->vm_flags & VM_EXEC)
- flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
- kunmap_coherent(vfrom);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(from) &&
- test_bit(PG_dcache_clean, &from->flags)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent(vfrom);
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
-
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
- (vma->vm_flags & VM_EXEC))
- __flush_purge_region(vto, PAGE_SIZE);
-
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
- void *kaddr = kmap_atomic(page);
-
- clear_page(kaddr);
-
- if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
- __flush_purge_region(kaddr, PAGE_SIZE);
-
- kunmap_atomic(kaddr);
-}
-EXPORT_SYMBOL(clear_user_highpage);
-
-void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
-{
- struct page *page;
- unsigned long pfn = pte_pfn(pte);
-
- if (!boot_cpu_data.dcache.n_aliases)
- return;
-
- page = pfn_to_page(pfn);
- if (pfn_valid(pfn)) {
- int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
- if (dirty)
- __flush_purge_region(page_address(page), PAGE_SIZE);
- }
-}
-
-void __flush_anon_page(struct page *page, unsigned long vmaddr)
-{
- unsigned long addr = (unsigned long) page_address(page);
-
- if (pages_do_alias(addr, vmaddr)) {
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *kaddr;
-
- kaddr = kmap_coherent(page, vmaddr);
- /* XXX.. For now kunmap_coherent() does a purge */
- /* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
- kunmap_coherent(kaddr);
- } else
- __flush_purge_region((void *)addr, PAGE_SIZE);
- }
-}
-
-void flush_cache_all(void)
-{
- cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
-}
-EXPORT_SYMBOL(flush_cache_all);
-
-void flush_cache_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
-}
-
-void flush_cache_dup_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
- unsigned long pfn)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = addr;
- data.addr2 = pfn;
-
- cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_cache_range);
-
-void flush_dcache_page(struct page *page)
-{
- cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void flush_icache_range(unsigned long start, unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = NULL;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
- /* Nothing uses the VMA, so just pass the struct page along */
- cacheop_on_each_cpu(local_flush_icache_page, page, 1);
-}
-
-void flush_cache_sigtramp(unsigned long address)
-{
- cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
-}
-
-static void compute_alias(struct cache_info *c)
-{
-#ifdef CONFIG_MMU
- c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
-#else
- c->alias_mask = 0;
-#endif
- c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
-}
-
-static void __init emit_cache_params(void)
-{
- printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.icache.ways,
- boot_cpu_data.icache.sets,
- boot_cpu_data.icache.way_incr);
- printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.icache.entry_mask,
- boot_cpu_data.icache.alias_mask,
- boot_cpu_data.icache.n_aliases);
- printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.dcache.ways,
- boot_cpu_data.dcache.sets,
- boot_cpu_data.dcache.way_incr);
- printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.dcache.entry_mask,
- boot_cpu_data.dcache.alias_mask,
- boot_cpu_data.dcache.n_aliases);
-
- /*
- * Emit Secondary Cache parameters if the CPU has a probed L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.scache.ways,
- boot_cpu_data.scache.sets,
- boot_cpu_data.scache.way_incr);
- printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.scache.entry_mask,
- boot_cpu_data.scache.alias_mask,
- boot_cpu_data.scache.n_aliases);
- }
-}
-
-void __init cpu_cache_init(void)
-{
- unsigned int cache_disabled = 0;
-
-#ifdef SH_CCR
- cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
-#endif
-
- compute_alias(&boot_cpu_data.icache);
- compute_alias(&boot_cpu_data.dcache);
- compute_alias(&boot_cpu_data.scache);
-
- __flush_wback_region = noop__flush_region;
- __flush_purge_region = noop__flush_region;
- __flush_invalidate_region = noop__flush_region;
-
- /*
- * No flushing is necessary in the disabled cache case so we can
- * just keep the noop functions in local_flush_..() and __flush_..()
- */
- if (unlikely(cache_disabled))
- goto skip;
-
- if (boot_cpu_data.type == CPU_J2) {
- extern void __weak j2_cache_init(void);
-
- j2_cache_init();
- } else if (boot_cpu_data.family == CPU_FAMILY_SH2) {
- extern void __weak sh2_cache_init(void);
-
- sh2_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
- extern void __weak sh2a_cache_init(void);
-
- sh2a_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH3) {
- extern void __weak sh3_cache_init(void);
-
- sh3_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7705) &&
- (boot_cpu_data.dcache.sets == 512)) {
- extern void __weak sh7705_cache_init(void);
-
- sh7705_cache_init();
- }
- }
-
- if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
- extern void __weak sh4_cache_init(void);
-
- sh4_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7786) ||
- (boot_cpu_data.type == CPU_SHX3)) {
- extern void __weak shx3_cache_init(void);
-
- shx3_cache_init();
- }
- }
-
-skip:
- emit_cache_params();
-}
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
deleted file mode 100644
index 0de206c1acfe9f..00000000000000
--- a/arch/sh/mm/consistent.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-static int __init memchunk_setup(char *str)
-{
- return 1; /* accept anything that begins with "memchunk." */
-}
-__setup("memchunk.", memchunk_setup);
-
-static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
-{
- char *p = boot_command_line;
- int k = strlen(name);
-
- while ((p = strstr(p, "memchunk."))) {
- p += 9; /* strlen("memchunk.") */
- if (!strncmp(name, p, k) && p[k] == '=') {
- p += k + 1;
- *sizep = memparse(p, NULL);
- pr_info("%s: forcing memory chunk size to 0x%08lx\n",
- name, *sizep);
- break;
- }
- }
-}
-
-int __init platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
-{
- struct resource *r;
- dma_addr_t dma_handle;
- void *buf;
-
- r = pdev->resource + pdev->num_resources - 1;
- if (r->flags) {
- pr_warn("%s: unable to find empty space for resource\n", name);
- return -EINVAL;
- }
-
- memchunk_cmdline_override(name, &memsize);
- if (!memsize)
- return 0;
-
- buf = dma_alloc_coherent(&pdev->dev, memsize, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_warn("%s: unable to allocate memory\n", name);
- return -ENOMEM;
- }
-
- r->flags = IORESOURCE_MEM;
- r->start = dma_handle;
- r->end = r->start + memsize - 1;
- r->name = name;
- return 0;
-}
diff --git a/arch/sh/mm/extable_32.c b/arch/sh/mm/extable_32.c
deleted file mode 100644
index 14312027bb0806..00000000000000
--- a/arch/sh/mm/extable_32.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/mm/extable.c
- * Taken from:
- * linux/arch/i386/mm/extable.c
- */
-
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return 1;
- }
-
- return 0;
-}
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
deleted file mode 100644
index acd2f5e50bfcd0..00000000000000
--- a/arch/sh/mm/fault.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Page fault handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * Based on linux/arch/i386/mm/fault.c:
- * Copyright (C) 1995 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched/signal.h>
-#include <linux/hardirq.h>
-#include <linux/kprobes.h>
-#include <linux/perf_event.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <asm/io_trapped.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-static void
-force_sig_info_fault(int si_signo, int si_code, unsigned long address)
-{
- force_sig_fault(si_signo, si_code, (void __user *)address);
-}
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-static void show_pte(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
-
- if (mm) {
- pgd = mm->pgd;
- } else {
- pgd = get_TTB();
-
- if (unlikely(!pgd))
- pgd = swapper_pg_dir;
- }
-
- pr_alert("pgd = %p\n", pgd);
- pgd += pgd_index(addr);
- pr_alert("[%08lx] *pgd=%0*llx", addr, (u32)(sizeof(*pgd) * 2),
- (u64)pgd_val(*pgd));
-
- do {
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
-
- if (pgd_none(*pgd))
- break;
-
- if (pgd_bad(*pgd)) {
- pr_cont("(bad)");
- break;
- }
-
- p4d = p4d_offset(pgd, addr);
- if (PTRS_PER_P4D != 1)
- pr_cont(", *p4d=%0*Lx", (u32)(sizeof(*p4d) * 2),
- (u64)p4d_val(*p4d));
-
- if (p4d_none(*p4d))
- break;
-
- if (p4d_bad(*p4d)) {
- pr_cont("(bad)");
- break;
- }
-
- pud = pud_offset(p4d, addr);
- if (PTRS_PER_PUD != 1)
- pr_cont(", *pud=%0*llx", (u32)(sizeof(*pud) * 2),
- (u64)pud_val(*pud));
-
- if (pud_none(*pud))
- break;
-
- if (pud_bad(*pud)) {
- pr_cont("(bad)");
- break;
- }
-
- pmd = pmd_offset(pud, addr);
- if (PTRS_PER_PMD != 1)
- pr_cont(", *pmd=%0*llx", (u32)(sizeof(*pmd) * 2),
- (u64)pmd_val(*pmd));
-
- if (pmd_none(*pmd))
- break;
-
- if (pmd_bad(*pmd)) {
- pr_cont("(bad)");
- break;
- }
-
- /* We must not map this if we have highmem enabled */
- if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
- break;
-
- pte = pte_offset_kernel(pmd, addr);
- pr_cont(", *pte=%0*llx", (u32)(sizeof(*pte) * 2),
- (u64)pte_val(*pte));
- } while (0);
-
- pr_cont("\n");
-}
-
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
- unsigned index = pgd_index(address);
- pgd_t *pgd_k;
- p4d_t *p4d, *p4d_k;
- pud_t *pud, *pud_k;
- pmd_t *pmd, *pmd_k;
-
- pgd += index;
- pgd_k = init_mm.pgd + index;
-
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d = p4d_offset(pgd, address);
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud = pud_offset(p4d, address);
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- if (!pud_present(*pud))
- set_pud(pud, *pud_k);
-
- pmd = pmd_offset(pud, address);
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- if (!pmd_present(*pmd))
- set_pmd(pmd, *pmd_k);
- else {
- /*
- * The page tables are fully synchronised so there must
- * be another reason for the fault. Return NULL here to
- * signal that we have not taken care of the fault.
- */
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
- return NULL;
- }
-
- return pmd_k;
-}
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define __FAULT_ADDR_LIMIT P3_ADDR_MAX
-#else
-#define __FAULT_ADDR_LIMIT VMALLOC_END
-#endif
-
-/*
- * Handle a fault on the vmalloc or module mapping area
- */
-static noinline int vmalloc_fault(unsigned long address)
-{
- pgd_t *pgd_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
-
- /* Make sure we are in vmalloc/module/P3 area: */
- if (!(address >= VMALLOC_START && address < __FAULT_ADDR_LIMIT))
- return -1;
-
- /*
- * Synchronize this task's top level page-table
- * with the 'reference' page table.
- *
- * Do _not_ use "current" here. We might be inside
- * an interrupt in the middle of a task switch..
- */
- pgd_k = get_TTB();
- pmd_k = vmalloc_sync_one(pgd_k, address);
- if (!pmd_k)
- return -1;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- if (!pte_present(*pte_k))
- return -1;
-
- return 0;
-}
-
-static void
-show_fault_oops(struct pt_regs *regs, unsigned long address)
-{
- if (!oops_may_print())
- return;
-
- pr_alert("BUG: unable to handle kernel %s at %08lx\n",
- address < PAGE_SIZE ? "NULL pointer dereference"
- : "paging request",
- address);
- pr_alert("PC:");
- printk_address(regs->pc, 1);
-
- show_pte(NULL, address);
-}
-
-static noinline void
-no_context(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- /* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
- return;
-
- if (handle_trapped_io(regs, address))
- return;
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- bust_spinlocks(1);
-
- show_fault_oops(regs, address);
-
- die("Oops", regs, error_code);
-}
-
-static void
-__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- /* User mode accesses just cause a SIGSEGV */
- if (user_mode(regs)) {
- /*
- * It's possible to have interrupts off here:
- */
- local_irq_enable();
-
- force_sig_info_fault(SIGSEGV, si_code, address);
-
- return;
- }
-
- no_context(regs, error_code, address);
-}
-
-static noinline void
-bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
-}
-
-static void
-__bad_area(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- struct mm_struct *mm = current->mm;
-
- /*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
- mmap_read_unlock(mm);
-
- __bad_area_nosemaphore(regs, error_code, address, si_code);
-}
-
-static noinline void
-bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_MAPERR);
-}
-
-static noinline void
-bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_ACCERR);
-}
-
-static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->mm;
-
- mmap_read_unlock(mm);
-
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs))
- no_context(regs, error_code, address);
-
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address);
-}
-
-static noinline int
-mm_fault_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, vm_fault_t fault)
-{
- /*
- * Pagefault was interrupted by SIGKILL. We have no reason to
- * continue pagefault.
- */
- if (fault_signal_pending(fault, regs)) {
- if (!user_mode(regs))
- no_context(regs, error_code, address);
- return 1;
- }
-
- /* Release mmap_lock first if necessary */
- if (!(fault & VM_FAULT_RETRY))
- mmap_read_unlock(current->mm);
-
- if (!(fault & VM_FAULT_ERROR))
- return 0;
-
- if (fault & VM_FAULT_OOM) {
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs)) {
- no_context(regs, error_code, address);
- return 1;
- }
-
- /*
- * We ran out of memory, call the OOM killer, and return the
- * userspace (which will retry the fault, or kill us if we got
- * oom-killed):
- */
- pagefault_out_of_memory();
- } else {
- if (fault & VM_FAULT_SIGBUS)
- do_sigbus(regs, error_code, address);
- else if (fault & VM_FAULT_SIGSEGV)
- bad_area(regs, error_code, address);
- else
- BUG();
- }
-
- return 1;
-}
-
-static inline int access_error(int error_code, struct vm_area_struct *vma)
-{
- if (error_code & FAULT_CODE_WRITE) {
- /* write, present and write, not present: */
- if (unlikely(!(vma->vm_flags & VM_WRITE)))
- return 1;
- return 0;
- }
-
- /* ITLB miss on NX page */
- if (unlikely((error_code & FAULT_CODE_ITLB) &&
- !(vma->vm_flags & VM_EXEC)))
- return 1;
-
- /* read, not present: */
- if (unlikely(!vma_is_accessible(vma)))
- return 1;
-
- return 0;
-}
-
-static int fault_in_kernel_space(unsigned long address)
-{
- return address >= TASK_SIZE;
-}
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
- unsigned long error_code,
- unsigned long address)
-{
- unsigned long vec;
- struct task_struct *tsk;
- struct mm_struct *mm;
- struct vm_area_struct * vma;
- vm_fault_t fault;
- unsigned int flags = FAULT_FLAG_DEFAULT;
-
- tsk = current;
- mm = tsk->mm;
- vec = lookup_exception_vector();
-
- /*
- * We fault-in kernel-space virtual memory on-demand. The
- * 'reference' page table is init_mm.pgd.
- *
- * NOTE! We MUST NOT take any locks for this case. We may
- * be in an interrupt or a critical region, and should
- * only copy the information from the master page table,
- * nothing more.
- */
- if (unlikely(fault_in_kernel_space(address))) {
- if (vmalloc_fault(address) >= 0)
- return;
- if (kprobe_page_fault(regs, vec))
- return;
-
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
- if (unlikely(kprobe_page_fault(regs, vec)))
- return;
-
- /* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK)
- local_irq_enable();
-
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
-
- /*
- * If we're in an interrupt, have no user context or are running
- * with pagefaults disabled then we must not take the fault:
- */
- if (unlikely(faulthandler_disabled() || !mm)) {
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
-retry:
- mmap_read_lock(mm);
-
- vma = find_vma(mm, address);
- if (unlikely(!vma)) {
- bad_area(regs, error_code, address);
- return;
- }
- if (likely(vma->vm_start <= address))
- goto good_area;
- if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
- bad_area(regs, error_code, address);
- return;
- }
- if (unlikely(expand_stack(vma, address))) {
- bad_area(regs, error_code, address);
- return;
- }
-
- /*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- if (unlikely(access_error(error_code, vma))) {
- bad_area_access_error(regs, error_code, address);
- return;
- }
-
- set_thread_fault_code(error_code);
-
- if (user_mode(regs))
- flags |= FAULT_FLAG_USER;
- if (error_code & FAULT_CODE_WRITE)
- flags |= FAULT_FLAG_WRITE;
-
- /*
- * If for any reason at all we couldn't handle the fault,
- * make sure we exit gracefully rather than endlessly redo
- * the fault.
- */
- fault = handle_mm_fault(vma, address, flags, regs);
-
- if (unlikely(fault & (VM_FAULT_RETRY | VM_FAULT_ERROR)))
- if (mm_fault_error(regs, error_code, address, fault))
- return;
-
- /* The fault is fully completed (including releasing mmap lock) */
- if (fault & VM_FAULT_COMPLETED)
- return;
-
- if (fault & VM_FAULT_RETRY) {
- flags |= FAULT_FLAG_TRIED;
-
- /*
- * No need to mmap_read_unlock(mm) as we would
- * have already released it in __lock_page_or_retry
- * in mm/filemap.c.
- */
- goto retry;
- }
-
- mmap_read_unlock(mm);
-}
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
deleted file mode 100644
index 8b8ef89721041b..00000000000000
--- a/arch/sh/mm/flush-sh4.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_wback_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_purge_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
- while (cnt) {
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * No write back please
- */
-static void sh4__flush_invalidate_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-void __init sh4__flush_region_init(void)
-{
- __flush_wback_region = sh4__flush_wback_region;
- __flush_invalidate_region = sh4__flush_invalidate_region;
- __flush_purge_region = sh4__flush_purge_region;
-}
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
deleted file mode 100644
index 999ab5916e6927..00000000000000
--- a/arch/sh/mm/hugetlbpage.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/mm/hugetlbpage.c
- *
- * SuperH HugeTLB page support.
- *
- * Cloned from sparc64 by Paul Mundt.
- *
- * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com)
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/sysctl.h>
-
-#include <asm/mman.h>
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_alloc(mm, pgd, addr);
- if (p4d) {
- pud = pud_alloc(mm, p4d, addr);
- if (pud) {
- pmd = pmd_alloc(mm, pud, addr);
- if (pmd)
- pte = pte_alloc_map(mm, pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-pte_t *huge_pte_offset(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_offset(pgd, addr);
- if (p4d) {
- pud = pud_offset(p4d, addr);
- if (pud) {
- pmd = pmd_offset(pud, addr);
- if (pmd)
- pte = pte_offset_map(pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-int pmd_huge(pmd_t pmd)
-{
- return 0;
-}
-
-int pud_huge(pud_t pud)
-{
- return 0;
-}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
deleted file mode 100644
index 506784702430c7..00000000000000
--- a/arch/sh/mm/init.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/sh/mm/init.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2011 Paul Mundt
- *
- * Based on linux/arch/i386/mm/init.c:
- * Copyright (C) 1995 Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <linux/pagemap.h>
-#include <linux/percpu.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/kexec.h>
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/sizes.h>
-#include "ioremap.h"
-
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-void __init generic_mem_init(void)
-{
- memblock_add(__MEMORY_START, __MEMORY_SIZE);
-}
-
-void __init __weak plat_mem_setup(void)
-{
- /* Nothing to see here, move along. */
-}
-
-#ifdef CONFIG_MMU
-static pte_t *__get_pte_phys(unsigned long addr)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
-
- pgd = pgd_offset_k(addr);
- if (pgd_none(*pgd)) {
- pgd_ERROR(*pgd);
- return NULL;
- }
-
- p4d = p4d_alloc(NULL, pgd, addr);
- if (unlikely(!p4d)) {
- p4d_ERROR(*p4d);
- return NULL;
- }
-
- pud = pud_alloc(NULL, p4d, addr);
- if (unlikely(!pud)) {
- pud_ERROR(*pud);
- return NULL;
- }
-
- pmd = pmd_alloc(NULL, pud, addr);
- if (unlikely(!pmd)) {
- pmd_ERROR(*pmd);
- return NULL;
- }
-
- return pte_offset_kernel(pmd, addr);
-}
-
-static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
- if (!pte_none(*pte)) {
- pte_ERROR(*pte);
- return;
- }
-
- set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
- local_flush_tlb_one(get_asid(), addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_wire_entry(NULL, addr, *pte);
-}
-
-static void clear_pte_phys(unsigned long addr, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_unwire_entry();
-
- set_pte(pte, pfn_pte(0, __pgprot(0)));
- local_flush_tlb_one(get_asid(), addr);
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- set_pte_phys(address, phys, prot);
-}
-
-void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- clear_pte_phys(address, prot);
-}
-
-static pmd_t * __init one_md_table_init(pud_t *pud)
-{
- if (pud_none(*pud)) {
- pmd_t *pmd;
-
- pmd = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pmd)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pud_populate(&init_mm, pud, pmd);
- BUG_ON(pmd != pmd_offset(pud, 0));
- }
-
- return pmd_offset(pud, 0);
-}
-
-static pte_t * __init one_page_table_init(pmd_t *pmd)
-{
- if (pmd_none(*pmd)) {
- pte_t *pte;
-
- pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pte)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pmd_populate_kernel(&init_mm, pmd, pte);
- BUG_ON(pte != pte_offset_kernel(pmd, 0));
- }
-
- return pte_offset_kernel(pmd, 0);
-}
-
-static pte_t * __init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
- unsigned long vaddr, pte_t *lastpte)
-{
- return pte;
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
- int i, j, k;
- unsigned long vaddr;
-
- vaddr = start;
- i = pgd_index(vaddr);
- j = pud_index(vaddr);
- k = pmd_index(vaddr);
- pgd = pgd_base + i;
-
- for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pud = (pud_t *)pgd;
- for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
- pmd = one_md_table_init(pud);
-#ifndef __PAGETABLE_PMD_FOLDED
- pmd += k;
-#endif
- for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
- pte = page_table_kmap_check(one_page_table_init(pmd),
- pmd, vaddr, pte);
- vaddr += PMD_SIZE;
- }
- k = 0;
- }
- j = 0;
- }
-}
-#endif /* CONFIG_MMU */
-
-void __init allocate_pgdat(unsigned int nid)
-{
- unsigned long start_pfn, end_pfn;
-
- get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
-
-#ifdef CONFIG_NUMA
- NODE_DATA(nid) = memblock_alloc_try_nid(
- sizeof(struct pglist_data),
- SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
- MEMBLOCK_ALLOC_ACCESSIBLE, nid);
- if (!NODE_DATA(nid))
- panic("Can't allocate pgdat for node %d\n", nid);
-#endif
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-}
-
-static void __init do_init_bootmem(void)
-{
- unsigned long start_pfn, end_pfn;
- int i;
-
- /* Add active regions with valid PFNs. */
- for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL)
- __add_active_range(0, start_pfn, end_pfn);
-
- /* All of system RAM sits in node 0 for the non-NUMA case */
- allocate_pgdat(0);
- node_set_online(0);
-
- plat_mem_setup();
-
- sparse_init();
-}
-
-static void __init early_reserve_mem(void)
-{
- unsigned long start_pfn;
- u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
- u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
-
- /*
- * Partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(_end));
-
- /*
- * Reserve the kernel text and Reserve the bootmem bitmap. We do
- * this in two steps (first step was init_bootmem()), because
- * this catches the (definitely buggy) case of us accidentally
- * initializing the bootmem allocator with an invalid RAM area.
- */
- memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
-
- /*
- * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
- */
- if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
-
- /*
- * Handle additional early reservations
- */
- check_for_initrd();
- reserve_crashkernel();
-}
-
-void __init paging_init(void)
-{
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- unsigned long vaddr, end;
-
- sh_mv.mv_mem_init();
-
- early_reserve_mem();
-
- /*
- * Once the early reservations are out of the way, give the
- * platforms a chance to kick out some memory.
- */
- if (sh_mv.mv_mem_reserve)
- sh_mv.mv_mem_reserve();
-
- memblock_enforce_memory_limit(memory_limit);
- memblock_allow_resize();
-
- memblock_dump_all();
-
- /*
- * Determine low and high memory ranges:
- */
- max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
- min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
-
- nodes_clear(node_online_map);
-
- memory_start = (unsigned long)__va(__MEMORY_START);
- memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
-
- uncached_init();
- pmb_init();
- do_init_bootmem();
- ioremap_fixed_init();
-
- /* We don't need to map the kernel through the TLB, as
- * it is permanatly mapped using P1. So clear the
- * entire pgd. */
- memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
- /* Set an initial value for the MMU.TTB so we don't have to
- * check for a null value. */
- set_TTB(swapper_pg_dir);
-
- /*
- * Populate the relevant portions of swapper_pg_dir so that
- * we can use the fixmap entries without calling kmalloc.
- * pte's will be filled in by __set_fixmap().
- */
- vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
- end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
- page_table_range_init(vaddr, end, swapper_pg_dir);
-
- kmap_coherent_init();
-
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init(max_zone_pfns);
-}
-
-unsigned int mem_init_done = 0;
-
-void __init mem_init(void)
-{
- pg_data_t *pgdat;
-
- high_memory = NULL;
- for_each_online_pgdat(pgdat)
- high_memory = max_t(void *, high_memory,
- __va(pgdat_end_pfn(pgdat) << PAGE_SHIFT));
-
- memblock_free_all();
-
- /* Set this up early, so we can take care of the zero page */
- cpu_cache_init();
-
- /* clear the zero-page */
- memset(empty_zero_page, 0, PAGE_SIZE);
- __flush_wback_region(empty_zero_page, PAGE_SIZE);
-
- vsyscall_init();
-
- pr_info("virtual kernel memory layout:\n"
- " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
- " lowmem : 0x%08lx - 0x%08lx (%4ld MB) (cached)\n"
-#ifdef CONFIG_UNCACHED_MAPPING
- " : 0x%08lx - 0x%08lx (%4ld MB) (uncached)\n"
-#endif
- " .init : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .data : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .text : 0x%08lx - 0x%08lx (%4ld kB)\n",
- FIXADDR_START, FIXADDR_TOP,
- (FIXADDR_TOP - FIXADDR_START) >> 10,
-
- (unsigned long)VMALLOC_START, VMALLOC_END,
- (VMALLOC_END - VMALLOC_START) >> 20,
-
- (unsigned long)memory_start, (unsigned long)high_memory,
- ((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
-
-#ifdef CONFIG_UNCACHED_MAPPING
- uncached_start, uncached_end, uncached_size >> 20,
-#endif
-
- (unsigned long)&__init_begin, (unsigned long)&__init_end,
- ((unsigned long)&__init_end -
- (unsigned long)&__init_begin) >> 10,
-
- (unsigned long)&_etext, (unsigned long)&_edata,
- ((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
-
- (unsigned long)&_text, (unsigned long)&_etext,
- ((unsigned long)&_etext - (unsigned long)&_text) >> 10);
-
- mem_init_done = 1;
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-int arch_add_memory(int nid, u64 start, u64 size,
- struct mhp_params *params)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
- int ret;
-
- if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
- return -EINVAL;
-
- /* We only have ZONE_NORMAL, so this is easy.. */
- ret = __add_pages(nid, start_pfn, nr_pages, params);
- if (unlikely(ret))
- printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
-
- return ret;
-}
-
-void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
-
- __remove_pages(start_pfn, nr_pages, altmap);
-}
-#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
deleted file mode 100644
index 21342581144dee..00000000000000
--- a/arch/sh/mm/ioremap.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * arch/sh/mm/ioremap.c
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2005 - 2010 Paul Mundt
- *
- * Re-map IO memory to kernel address space so that we can access it.
- * This is needed for high PCI addresses that aren't mapped in the
- * 640k-1MB IO memory area on PC's
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include "ioremap.h"
-
-/*
- * On 32-bit SH, we traditionally have the whole physical address space mapped
- * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
- * anything but place the address in the proper segment. This is true for P1
- * and P2 addresses, as well as some P3 ones. However, most of the P3 addresses
- * and newer cores using extended addressing need to map through page tables, so
- * the ioremap() implementation becomes a bit more complicated.
- */
-#ifdef CONFIG_29BIT
-static void __iomem *
-__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
- phys_addr_t last_addr = offset + size - 1;
-
- /*
- * For P1 and P2 space this is trivial, as everything is already
- * mapped. Uncached access for P1 addresses are done through P2.
- * In the P3 case or for addresses outside of the 29-bit space,
- * mapping must be done by the PMB or by using page tables.
- */
- if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
- u64 flags = pgprot_val(prot);
-
- /*
- * Anything using the legacy PTEA space attributes needs
- * to be kicked down to page table mappings.
- */
- if (unlikely(flags & _PAGE_PCC_MASK))
- return NULL;
- if (unlikely(flags & _PAGE_CACHABLE))
- return (void __iomem *)P1SEGADDR(offset);
-
- return (void __iomem *)P2SEGADDR(offset);
- }
-
- /* P4 above the store queues are always mapped. */
- if (unlikely(offset >= P3_ADDR_MAX))
- return (void __iomem *)P4SEGADDR(offset);
-
- return NULL;
-}
-#else
-#define __ioremap_29bit(offset, size, prot) NULL
-#endif /* CONFIG_29BIT */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem * __ref
-__ioremap_caller(phys_addr_t phys_addr, unsigned long size,
- pgprot_t pgprot, void *caller)
-{
- struct vm_struct *area;
- unsigned long offset, last_addr, addr, orig_addr;
- void __iomem *mapped;
-
- mapped = __ioremap_trapped(phys_addr, size);
- if (mapped)
- return mapped;
-
- mapped = __ioremap_29bit(phys_addr, size, pgprot);
- if (mapped)
- return mapped;
-
- /* Don't allow wraparound or zero size */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- /*
- * If we can't yet use the regular approach, go the fixmap route.
- */
- if (!mem_init_done)
- return ioremap_fixed(phys_addr, size, pgprot);
-
- /*
- * First try to remap through the PMB.
- * PMB entries are all pre-faulted.
- */
- mapped = pmb_remap_caller(phys_addr, size, pgprot, caller);
- if (mapped && !IS_ERR(mapped))
- return mapped;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(last_addr+1) - phys_addr;
-
- /*
- * Ok, go for it..
- */
- area = get_vm_area_caller(size, VM_IOREMAP, caller);
- if (!area)
- return NULL;
- area->phys_addr = phys_addr;
- orig_addr = addr = (unsigned long)area->addr;
-
- if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
- vunmap((void *)orig_addr);
- return NULL;
- }
-
- return (void __iomem *)(offset + (char *)orig_addr);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-/*
- * Simple checks for non-translatable mappings.
- */
-static inline int iomapping_nontranslatable(unsigned long offset)
-{
-#ifdef CONFIG_29BIT
- /*
- * In 29-bit mode this includes the fixed P1/P2 areas, as well as
- * parts of P3.
- */
- if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
- return 1;
-#endif
-
- return 0;
-}
-
-void iounmap(void __iomem *addr)
-{
- unsigned long vaddr = (unsigned long __force)addr;
- struct vm_struct *p;
-
- /*
- * Nothing to do if there is no translatable mapping.
- */
- if (iomapping_nontranslatable(vaddr))
- return;
-
- /*
- * There's no VMA if it's from an early fixed mapping.
- */
- if (iounmap_fixed(addr) == 0)
- return;
-
- /*
- * If the PMB handled it, there's nothing else to do.
- */
- if (pmb_unmap(addr) == 0)
- return;
-
- p = remove_vm_area((void *)(vaddr & PAGE_MASK));
- if (!p) {
- printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
- return;
- }
-
- kfree(p);
-}
-EXPORT_SYMBOL(iounmap);
diff --git a/arch/sh/mm/ioremap.h b/arch/sh/mm/ioremap.h
deleted file mode 100644
index f2544e721a3526..00000000000000
--- a/arch/sh/mm/ioremap.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _SH_MM_IORMEMAP_H
-#define _SH_MM_IORMEMAP_H 1
-
-#ifdef CONFIG_IOREMAP_FIXED
-void __iomem *ioremap_fixed(phys_addr_t, unsigned long, pgprot_t);
-int iounmap_fixed(void __iomem *);
-void ioremap_fixed_init(void);
-#else
-static inline void __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- BUG();
- return NULL;
-}
-static inline void ioremap_fixed_init(void)
-{
-}
-static inline int iounmap_fixed(void __iomem *addr)
-{
- return -EINVAL;
-}
-#endif /* CONFIG_IOREMAP_FIXED */
-#endif /* _SH_MM_IORMEMAP_H */
diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c
deleted file mode 100644
index 136113bcac2599..00000000000000
--- a/arch/sh/mm/ioremap_fixed.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * These functions should only be used when it is necessary to map a
- * physical address space into the kernel address space before ioremap()
- * can be used, e.g. early in boot before paging_init().
- *
- * Copyright (C) 2009 Matt Fleming
- */
-
-#include <linux/vmalloc.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <asm/fixmap.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include "ioremap.h"
-
-struct ioremap_map {
- void __iomem *addr;
- unsigned long size;
- unsigned long fixmap_addr;
-};
-
-static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
-
-void __init ioremap_fixed_init(void)
-{
- struct ioremap_map *map;
- int i;
-
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
- }
-}
-
-void __init __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- enum fixed_addresses idx0, idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- unsigned long offset;
- int i, slot;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(phys_addr + size) - phys_addr;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (!map->addr) {
- map->size = size;
- slot = i;
- break;
- }
- }
-
- if (slot < 0)
- return NULL;
-
- /*
- * Mappings have to fit in the FIX_IOREMAP area.
- */
- nrpages = size >> PAGE_SHIFT;
- if (nrpages > FIX_N_IOREMAPS)
- return NULL;
-
- /*
- * Ok, go for it..
- */
- idx0 = FIX_IOREMAP_BEGIN + slot;
- idx = idx0;
- while (nrpages > 0) {
- pgprot_val(prot) |= _PAGE_WIRED;
- __set_fixmap(idx, phys_addr, prot);
- phys_addr += PAGE_SIZE;
- idx++;
- --nrpages;
- }
-
- map->addr = (void __iomem *)(offset + map->fixmap_addr);
- return map->addr;
-}
-
-int iounmap_fixed(void __iomem *addr)
-{
- enum fixed_addresses idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- int i, slot;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (map->addr == addr) {
- slot = i;
- break;
- }
- }
-
- /*
- * If we don't match, it's not for us.
- */
- if (slot < 0)
- return -EINVAL;
-
- nrpages = map->size >> PAGE_SHIFT;
-
- idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
- while (nrpages > 0) {
- __clear_fixmap(idx, __pgprot(_PAGE_WIRED));
- --idx;
- --nrpages;
- }
-
- map->size = 0;
- map->addr = NULL;
-
- return 0;
-}
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
deleted file mode 100644
index 73fd7cc9943076..00000000000000
--- a/arch/sh/mm/kmap.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/kmap.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
- unsigned long vaddr;
-
- /* cache the first coherent kmap pte */
- vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
- kmap_coherent_pte = virt_to_kpte(vaddr);
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- enum fixed_addresses idx;
- unsigned long vaddr;
-
- BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
-
- preempt_disable();
- pagefault_disable();
-
- idx = FIX_CMAP_END -
- (((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
- (FIX_N_COLOURS * smp_processor_id()));
-
- vaddr = __fix_to_virt(idx);
-
- BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
- set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
-
- return (void *)vaddr;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- if (kvaddr >= (void *)FIXADDR_START) {
- unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
- enum fixed_addresses idx = __virt_to_fix(vaddr);
-
- /* XXX.. Kill this later, here for sanity at the moment.. */
- __flush_purge_region((void *)vaddr, PAGE_SIZE);
-
- pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
- local_flush_tlb_one(get_asid(), vaddr);
- }
-
- pagefault_enable();
- preempt_enable();
-}
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
deleted file mode 100644
index b82199878b4594..00000000000000
--- a/arch/sh/mm/mmap.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/sh/mm/mmap.c
- *
- * Copyright (C) 2008 - 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sched/mm.h>
-#include <linux/mman.h>
-#include <linux/module.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-EXPORT_SYMBOL(shm_align_mask);
-
-#ifdef CONFIG_MMU
-static const pgprot_t protection_map[16] = {
- [VM_NONE] = PAGE_NONE,
- [VM_READ] = PAGE_READONLY,
- [VM_WRITE] = PAGE_COPY,
- [VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_EXEC] = PAGE_EXECREAD,
- [VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_EXEC | VM_WRITE] = PAGE_COPY,
- [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_SHARED] = PAGE_NONE,
- [VM_SHARED | VM_READ] = PAGE_READONLY,
- [VM_SHARED | VM_WRITE] = PAGE_WRITEONLY,
- [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED,
- [VM_SHARED | VM_EXEC] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_RWX,
- [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_RWX
-};
-DECLARE_VM_GET_PAGE_PROT
-
-/*
- * To avoid cache aliases, we map the shared page with same color.
- */
-static inline unsigned long COLOUR_ALIGN(unsigned long addr,
- unsigned long pgoff)
-{
- unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
- unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
-
- return base + off;
-}
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
-{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = 0;
- info.length = len;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- return vm_unmapped_area(&info);
-}
-
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
- const unsigned long len, const unsigned long pgoff,
- const unsigned long flags)
-{
- struct vm_area_struct *vma;
- struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- /* requesting a specific address */
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = VM_UNMAPPED_AREA_TOPDOWN;
- info.length = len;
- info.low_limit = PAGE_SIZE;
- info.high_limit = mm->mmap_base;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- addr = vm_unmapped_area(&info);
-
- /*
- * A failed mmap() very likely causes application failure,
- * so fall back to the bottom-up function here. This scenario
- * can happen with large stack limits and large mmap()
- * allocations.
- */
- if (addr & ~PAGE_MASK) {
- VM_BUG_ON(addr != -ENOMEM);
- info.flags = 0;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- addr = vm_unmapped_area(&info);
- }
-
- return addr;
-}
-#endif /* CONFIG_MMU */
-
-/*
- * You really shouldn't be using read() or write() on /dev/mem. This
- * might go away in the future.
- */
-int valid_phys_addr_range(phys_addr_t addr, size_t count)
-{
- if (addr < __MEMORY_START)
- return 0;
- if (addr + count > __pa(high_memory))
- return 0;
-
- return 1;
-}
-
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
-{
- return 1;
-}
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
deleted file mode 100644
index 78c4b6e6d33ba3..00000000000000
--- a/arch/sh/mm/nommu.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/nommu.c
- *
- * Various helper routines and stubs for MMUless SH.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <linux/uaccess.h>
-
-/*
- * Nothing too terribly exciting here ..
- */
-void copy_page(void *to, void *from)
-{
- memcpy(to, from, PAGE_SIZE);
-}
-
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
-{
- memcpy(to, from, n);
- return 0;
-}
-
-__kernel_size_t __clear_user(void __user *to, __kernel_size_t n)
-{
- memset((__force void *)to, 0, n);
- return 0;
-}
-
-void local_flush_tlb_all(void)
-{
- BUG();
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- BUG();
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-void __flush_tlb_global(void)
-{
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-}
-
-void __init kmap_coherent_init(void)
-{
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- BUG();
- return NULL;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- BUG();
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
-}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
deleted file mode 100644
index 50f0dc1744d049..00000000000000
--- a/arch/sh/mm/numa.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/mm/numa.c - Multiple node support for SH machines
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/memblock.h>
-#include <linux/mm.h>
-#include <linux/numa.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL_GPL(node_data);
-
-/*
- * On SH machines the conventional approach is to stash system RAM
- * in node 0, and other memory blocks in to node 1 and up, ordered by
- * latency. Each node's pgdat is node-local at the beginning of the node,
- * immediately followed by the node mem map.
- */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
- unsigned long start_pfn, end_pfn;
-
- /* Don't allow bogus node assignment */
- BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
-
- start_pfn = PFN_DOWN(start);
- end_pfn = PFN_DOWN(end);
-
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_add(start, end - start);
-
- __add_active_range(nid, start_pfn, end_pfn);
-
- /* Node-local pgdat */
- NODE_DATA(nid) = memblock_alloc_node(sizeof(struct pglist_data),
- SMP_CACHE_BYTES, nid);
- if (!NODE_DATA(nid))
- panic("%s: Failed to allocate %zu bytes align=0x%x nid=%d\n",
- __func__, sizeof(struct pglist_data), SMP_CACHE_BYTES,
- nid);
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-
- /* It's up */
- node_set_online(nid);
-}
diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c
deleted file mode 100644
index cf7ce4b5735954..00000000000000
--- a/arch/sh/mm/pgtable.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-static struct kmem_cache *pgd_cachep;
-#if PAGETABLE_LEVELS > 2
-static struct kmem_cache *pmd_cachep;
-#endif
-
-void pgd_ctor(void *x)
-{
- pgd_t *pgd = x;
-
- memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
- memcpy(pgd + USER_PTRS_PER_PGD,
- swapper_pg_dir + USER_PTRS_PER_PGD,
- (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
-void pgtable_cache_init(void)
-{
- pgd_cachep = kmem_cache_create("pgd_cache",
- PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, pgd_ctor);
-#if PAGETABLE_LEVELS > 2
- pmd_cachep = kmem_cache_create("pmd_cache",
- PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, NULL);
-#endif
-}
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return kmem_cache_alloc(pgd_cachep, GFP_KERNEL);
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- kmem_cache_free(pgd_cachep, pgd);
-}
-
-#if PAGETABLE_LEVELS > 2
-void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
- set_pud(pud, __pud((unsigned long)pmd));
-}
-
-pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- return kmem_cache_alloc(pmd_cachep, GFP_KERNEL | __GFP_ZERO);
-}
-
-void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
- kmem_cache_free(pmd_cachep, pmd);
-}
-#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
deleted file mode 100644
index 68eb7cc6e56435..00000000000000
--- a/arch/sh/mm/pmb.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * arch/sh/mm/pmb.c
- *
- * Privileged Space Mapping Buffer (PMB) Support.
- *
- * Copyright (C) 2005 - 2011 Paul Mundt
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/syscore_ops.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/vmalloc.h>
-#include <linux/pgtable.h>
-#include <asm/cacheflush.h>
-#include <linux/sizes.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-
-struct pmb_entry;
-
-struct pmb_entry {
- unsigned long vpn;
- unsigned long ppn;
- unsigned long flags;
- unsigned long size;
-
- raw_spinlock_t lock;
-
- /*
- * 0 .. NR_PMB_ENTRIES for specific entry selection, or
- * PMB_NO_ENTRY to search for a free one
- */
- int entry;
-
- /* Adjacent entry link for contiguous multi-entry mappings */
- struct pmb_entry *link;
-};
-
-static struct {
- unsigned long size;
- int flag;
-} pmb_sizes[] = {
- { .size = SZ_512M, .flag = PMB_SZ_512M, },
- { .size = SZ_128M, .flag = PMB_SZ_128M, },
- { .size = SZ_64M, .flag = PMB_SZ_64M, },
- { .size = SZ_16M, .flag = PMB_SZ_16M, },
-};
-
-static void pmb_unmap_entry(struct pmb_entry *, int depth);
-
-static DEFINE_RWLOCK(pmb_rwlock);
-static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
-static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
-
-static unsigned int pmb_iomapping_enabled;
-
-static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
-{
- return (entry & PMB_E_MASK) << PMB_E_SHIFT;
-}
-
-static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_ADDR;
-}
-
-static __always_inline unsigned long mk_pmb_data(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_DATA;
-}
-
-static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
-{
- return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
-}
-
-/*
- * Ensure that the PMB entries match our cache configuration.
- *
- * When we are in 32-bit address extended mode, CCR.CB becomes
- * invalid, so care must be taken to manually adjust cacheable
- * translations.
- */
-static __always_inline unsigned long pmb_cache_flags(void)
-{
- unsigned long flags = 0;
-
-#if defined(CONFIG_CACHE_OFF)
- flags |= PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITETHROUGH)
- flags |= PMB_C | PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- flags |= PMB_C;
-#endif
-
- return flags;
-}
-
-/*
- * Convert typical pgprot value to the PMB equivalent
- */
-static inline unsigned long pgprot_to_pmb_flags(pgprot_t prot)
-{
- unsigned long pmb_flags = 0;
- u64 flags = pgprot_val(prot);
-
- if (flags & _PAGE_CACHABLE)
- pmb_flags |= PMB_C;
- if (flags & _PAGE_WT)
- pmb_flags |= PMB_WT | PMB_UB;
-
- return pmb_flags;
-}
-
-static inline bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
-{
- return (b->vpn == (a->vpn + a->size)) &&
- (b->ppn == (a->ppn + a->size)) &&
- (b->flags == a->flags);
-}
-
-static bool pmb_mapping_exists(unsigned long vaddr, phys_addr_t phys,
- unsigned long size)
-{
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe, *iter;
- unsigned long span;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * See if VPN and PPN are bounded by an existing mapping.
- */
- if ((vaddr < pmbe->vpn) || (vaddr >= (pmbe->vpn + pmbe->size)))
- continue;
- if ((phys < pmbe->ppn) || (phys >= (pmbe->ppn + pmbe->size)))
- continue;
-
- /*
- * Now see if we're in range of a simple mapping.
- */
- if (size <= pmbe->size) {
- read_unlock(&pmb_rwlock);
- return true;
- }
-
- span = pmbe->size;
-
- /*
- * Finally for sizes that involve compound mappings, walk
- * the chain.
- */
- for (iter = pmbe->link; iter; iter = iter->link)
- span += iter->size;
-
- /*
- * Nothing else to do if the range requirements are met.
- */
- if (size <= span) {
- read_unlock(&pmb_rwlock);
- return true;
- }
- }
-
- read_unlock(&pmb_rwlock);
- return false;
-}
-
-static bool pmb_size_valid(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return true;
-
- return false;
-}
-
-static inline bool pmb_addr_valid(unsigned long addr, unsigned long size)
-{
- return (addr >= P1SEG && (addr + size - 1) < P3SEG);
-}
-
-static inline bool pmb_prot_valid(pgprot_t prot)
-{
- return (pgprot_val(prot) & _PAGE_USER) == 0;
-}
-
-static int pmb_size_to_flags(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return pmb_sizes[i].flag;
-
- return 0;
-}
-
-static int pmb_alloc_entry(void)
-{
- int pos;
-
- pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
- if (pos >= 0 && pos < NR_PMB_ENTRIES)
- __set_bit(pos, pmb_map);
- else
- pos = -ENOSPC;
-
- return pos;
-}
-
-static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int entry)
-{
- struct pmb_entry *pmbe;
- unsigned long irqflags;
- void *ret = NULL;
- int pos;
-
- write_lock_irqsave(&pmb_rwlock, irqflags);
-
- if (entry == PMB_NO_ENTRY) {
- pos = pmb_alloc_entry();
- if (unlikely(pos < 0)) {
- ret = ERR_PTR(pos);
- goto out;
- }
- } else {
- if (__test_and_set_bit(entry, pmb_map)) {
- ret = ERR_PTR(-ENOSPC);
- goto out;
- }
-
- pos = entry;
- }
-
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
-
- pmbe = &pmb_entry_list[pos];
-
- memset(pmbe, 0, sizeof(struct pmb_entry));
-
- raw_spin_lock_init(&pmbe->lock);
-
- pmbe->vpn = vpn;
- pmbe->ppn = ppn;
- pmbe->flags = flags;
- pmbe->entry = pos;
-
- return pmbe;
-
-out:
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
- return ret;
-}
-
-static void pmb_free(struct pmb_entry *pmbe)
-{
- __clear_bit(pmbe->entry, pmb_map);
-
- pmbe->entry = PMB_NO_ENTRY;
- pmbe->link = NULL;
-}
-
-/*
- * Must be run uncached.
- */
-static void __set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- jump_to_uncached();
-
- /* Set V-bit */
- __raw_writel(pmbe->vpn | PMB_V, addr);
- __raw_writel(pmbe->ppn | pmbe->flags | PMB_V, data);
-
- back_to_cached();
-}
-
-static void __clear_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
- unsigned long addr_val, data_val;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /* Clear V-bit */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
-}
-
-#ifdef CONFIG_PM
-static void set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
- __set_pmb_entry(pmbe);
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
-}
-#endif /* CONFIG_PM */
-
-int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- struct pmb_entry *pmbp, *pmbe;
- unsigned long orig_addr, orig_size;
- unsigned long flags, pmb_flags;
- int i, mapped;
-
- if (size < SZ_16M)
- return -EINVAL;
- if (!pmb_addr_valid(vaddr, size))
- return -EFAULT;
- if (pmb_mapping_exists(vaddr, phys, size))
- return 0;
-
- orig_addr = vaddr;
- orig_size = size;
-
- flush_tlb_kernel_range(vaddr, vaddr + size);
-
- pmb_flags = pgprot_to_pmb_flags(prot);
- pmbp = NULL;
-
- do {
- for (i = mapped = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- if (size < pmb_sizes[i].size)
- continue;
-
- pmbe = pmb_alloc(vaddr, phys, pmb_flags |
- pmb_sizes[i].flag, PMB_NO_ENTRY);
- if (IS_ERR(pmbe)) {
- pmb_unmap_entry(pmbp, mapped);
- return PTR_ERR(pmbe);
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = pmb_sizes[i].size;
-
- __set_pmb_entry(pmbe);
-
- phys += pmbe->size;
- vaddr += pmbe->size;
- size -= pmbe->size;
-
- /*
- * Link adjacent entries that span multiple PMB
- * entries for easier tear-down.
- */
- if (likely(pmbp)) {
- raw_spin_lock_nested(&pmbp->lock,
- SINGLE_DEPTH_NESTING);
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- /*
- * Instead of trying smaller sizes on every
- * iteration (even if we succeed in allocating
- * space), try using pmb_sizes[i].size again.
- */
- i--;
- mapped++;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
- } while (size >= SZ_16M);
-
- flush_cache_vmap(orig_addr, orig_addr + orig_size);
-
- return 0;
-}
-
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- unsigned long vaddr;
- phys_addr_t offset, last_addr;
- phys_addr_t align_mask;
- unsigned long aligned;
- struct vm_struct *area;
- int i, ret;
-
- if (!pmb_iomapping_enabled)
- return NULL;
-
- /*
- * Small mappings need to go through the TLB.
- */
- if (size < SZ_16M)
- return ERR_PTR(-EINVAL);
- if (!pmb_prot_valid(prot))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (size >= pmb_sizes[i].size)
- break;
-
- last_addr = phys + size;
- align_mask = ~(pmb_sizes[i].size - 1);
- offset = phys & ~align_mask;
- phys &= align_mask;
- aligned = ALIGN(last_addr, pmb_sizes[i].size) - phys;
-
- /*
- * XXX: This should really start from uncached_end, but this
- * causes the MMU to reset, so for now we restrict it to the
- * 0xb000...0xc000 range.
- */
- area = __get_vm_area_caller(aligned, VM_IOREMAP, 0xb0000000,
- P3SEG, caller);
- if (!area)
- return NULL;
-
- area->phys_addr = phys;
- vaddr = (unsigned long)area->addr;
-
- ret = pmb_bolt_mapping(vaddr, phys, size, prot);
- if (unlikely(ret != 0))
- return ERR_PTR(ret);
-
- return (void __iomem *)(offset + (char *)vaddr);
-}
-
-int pmb_unmap(void __iomem *addr)
-{
- struct pmb_entry *pmbe = NULL;
- unsigned long vaddr = (unsigned long __force)addr;
- int i, found = 0;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- if (pmbe->vpn == vaddr) {
- found = 1;
- break;
- }
- }
- }
-
- read_unlock(&pmb_rwlock);
-
- if (found) {
- pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
- return 0;
- }
-
- return -EINVAL;
-}
-
-static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- do {
- struct pmb_entry *pmblink = pmbe;
-
- /*
- * We may be called before this pmb_entry has been
- * entered into the PMB table via set_pmb_entry(), but
- * that's OK because we've allocated a unique slot for
- * this entry in pmb_alloc() (even if we haven't filled
- * it yet).
- *
- * Therefore, calling __clear_pmb_entry() is safe as no
- * other mapping can be using that slot.
- */
- __clear_pmb_entry(pmbe);
-
- flush_cache_vunmap(pmbe->vpn, pmbe->vpn + pmbe->size);
-
- pmbe = pmblink->link;
-
- pmb_free(pmblink);
- } while (pmbe && --depth);
-}
-
-static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- unsigned long flags;
-
- if (unlikely(!pmbe))
- return;
-
- write_lock_irqsave(&pmb_rwlock, flags);
- __pmb_unmap_entry(pmbe, depth);
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-static void __init pmb_notify(void)
-{
- int i;
-
- pr_info("PMB: boot mappings:\n");
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- pr_info(" 0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
- pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
- pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-/*
- * Sync our software copy of the PMB mappings with those in hardware. The
- * mappings in the hardware PMB were either set up by the bootloader or
- * very early on by the kernel.
- */
-static void __init pmb_synchronize(void)
-{
- struct pmb_entry *pmbp = NULL;
- int i, j;
-
- /*
- * Run through the initial boot mappings, log the established
- * ones, and blow away anything that falls outside of the valid
- * PPN range. Specifically, we only care about existing mappings
- * that impact the cached/uncached sections.
- *
- * Note that touching these can be a bit of a minefield; the boot
- * loader can establish multi-page mappings with the same caching
- * attributes, so we need to ensure that we aren't modifying a
- * mapping that we're presently executing from, or may execute
- * from in the case of straddling page boundaries.
- *
- * In the future we will have to tidy up after the boot loader by
- * jumping between the cached and uncached mappings and tearing
- * down alternating mappings while executing from the other.
- */
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned long addr_val, data_val;
- unsigned long ppn, vpn, flags;
- unsigned long irqflags;
- unsigned int size;
- struct pmb_entry *pmbe;
-
- addr = mk_pmb_addr(i);
- data = mk_pmb_data(i);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /*
- * Skip over any bogus entries
- */
- if (!(data_val & PMB_V) || !(addr_val & PMB_V))
- continue;
-
- ppn = data_val & PMB_PFN_MASK;
- vpn = addr_val & PMB_PFN_MASK;
-
- /*
- * Only preserve in-range mappings.
- */
- if (!pmb_ppn_in_range(ppn)) {
- /*
- * Invalidate anything out of bounds.
- */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
- continue;
- }
-
- /*
- * Update the caching attributes if necessary
- */
- if (data_val & PMB_C) {
- data_val &= ~PMB_CACHE_MASK;
- data_val |= pmb_cache_flags();
-
- writel_uncached(data_val, data);
- }
-
- size = data_val & PMB_SZ_MASK;
- flags = size | (data_val & PMB_CACHE_MASK);
-
- pmbe = pmb_alloc(vpn, ppn, flags, i);
- if (IS_ERR(pmbe)) {
- WARN_ON_ONCE(1);
- continue;
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, irqflags);
-
- for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
- if (pmb_sizes[j].flag == size)
- pmbe->size = pmb_sizes[j].size;
-
- if (pmbp) {
- raw_spin_lock_nested(&pmbp->lock, SINGLE_DEPTH_NESTING);
- /*
- * Compare the previous entry against the current one to
- * see if the entries span a contiguous mapping. If so,
- * setup the entry links accordingly. Compound mappings
- * are later coalesced.
- */
- if (pmb_can_merge(pmbp, pmbe))
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, irqflags);
- }
-}
-
-static void __init pmb_merge(struct pmb_entry *head)
-{
- unsigned long span, newsize;
- struct pmb_entry *tail;
- int i = 1, depth = 0;
-
- span = newsize = head->size;
-
- tail = head->link;
- while (tail) {
- span += tail->size;
-
- if (pmb_size_valid(span)) {
- newsize = span;
- depth = i;
- }
-
- /* This is the end of the line.. */
- if (!tail->link)
- break;
-
- tail = tail->link;
- i++;
- }
-
- /*
- * The merged page size must be valid.
- */
- if (!depth || !pmb_size_valid(newsize))
- return;
-
- head->flags &= ~PMB_SZ_MASK;
- head->flags |= pmb_size_to_flags(newsize);
-
- head->size = newsize;
-
- __pmb_unmap_entry(head->link, depth);
- __set_pmb_entry(head);
-}
-
-static void __init pmb_coalesce(void)
-{
- unsigned long flags;
- int i;
-
- write_lock_irqsave(&pmb_rwlock, flags);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * We're only interested in compound mappings
- */
- if (!pmbe->link)
- continue;
-
- /*
- * Nothing to do if it already uses the largest possible
- * page size.
- */
- if (pmbe->size == SZ_512M)
- continue;
-
- pmb_merge(pmbe);
- }
-
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-#ifdef CONFIG_UNCACHED_MAPPING
-static void __init pmb_resize(void)
-{
- int i;
-
- /*
- * If the uncached mapping was constructed by the kernel, it will
- * already be a reasonable size.
- */
- if (uncached_size == SZ_16M)
- return;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
- unsigned long flags;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- if (pmbe->vpn != uncached_start)
- continue;
-
- /*
- * Found it, now resize it.
- */
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = SZ_16M;
- pmbe->flags &= ~PMB_SZ_MASK;
- pmbe->flags |= pmb_size_to_flags(pmbe->size);
-
- uncached_resize(pmbe->size);
-
- __set_pmb_entry(pmbe);
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
-
- read_unlock(&pmb_rwlock);
-}
-#endif
-
-static int __init early_pmb(char *p)
-{
- if (!p)
- return 0;
-
- if (strstr(p, "iomap"))
- pmb_iomapping_enabled = 1;
-
- return 0;
-}
-early_param("pmb", early_pmb);
-
-void __init pmb_init(void)
-{
- /* Synchronize software state */
- pmb_synchronize();
-
- /* Attempt to combine compound mappings */
- pmb_coalesce();
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /* Resize initial mappings, if necessary */
- pmb_resize();
-#endif
-
- /* Log them */
- pmb_notify();
-
- writel_uncached(0, PMB_IRMCR);
-
- /* Flush out the TLB */
- local_flush_tlb_all();
- ctrl_barrier();
-}
-
-bool __in_29bit_mode(void)
-{
- return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
-}
-
-static int pmb_debugfs_show(struct seq_file *file, void *iter)
-{
- int i;
-
- seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
- "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
- seq_printf(file, "ety vpn ppn size flags\n");
-
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned int size;
- char *sz_str = NULL;
-
- addr = __raw_readl(mk_pmb_addr(i));
- data = __raw_readl(mk_pmb_data(i));
-
- size = data & PMB_SZ_MASK;
- sz_str = (size == PMB_SZ_16M) ? " 16MB":
- (size == PMB_SZ_64M) ? " 64MB":
- (size == PMB_SZ_128M) ? "128MB":
- "512MB";
-
- /* 02: V 0x88 0x08 128MB C CB B */
- seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
- i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
- (addr >> 24) & 0xff, (data >> 24) & 0xff,
- sz_str, (data & PMB_C) ? 'C' : ' ',
- (data & PMB_WT) ? "WT" : "CB",
- (data & PMB_UB) ? "UB" : " B");
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(pmb_debugfs);
-
-static int __init pmb_debugfs_init(void)
-{
- debugfs_create_file("pmb", S_IFREG | S_IRUGO, arch_debugfs_dir, NULL,
- &pmb_debugfs_fops);
- return 0;
-}
-subsys_initcall(pmb_debugfs_init);
-
-#ifdef CONFIG_PM
-static void pmb_syscore_resume(void)
-{
- struct pmb_entry *pmbe;
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- set_pmb_entry(pmbe);
- }
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-static struct syscore_ops pmb_syscore_ops = {
- .resume = pmb_syscore_resume,
-};
-
-static int __init pmb_sysdev_init(void)
-{
- register_syscore_ops(&pmb_syscore_ops);
- return 0;
-}
-subsys_initcall(pmb_sysdev_init);
-#endif
diff --git a/arch/sh/mm/sram.c b/arch/sh/mm/sram.c
deleted file mode 100644
index 2d8fa718d55e74..00000000000000
--- a/arch/sh/mm/sram.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SRAM pool for tiny memories not otherwise managed.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <asm/sram.h>
-
-/*
- * This provides a standard SRAM pool for tiny memories that can be
- * added either by the CPU or the platform code. Typical SRAM sizes
- * to be inserted in to the pool will generally be less than the page
- * size, with anything more reasonably sized handled as a NUMA memory
- * node.
- */
-struct gen_pool *sram_pool;
-
-static int __init sram_pool_init(void)
-{
- /*
- * This is a global pool, we don't care about node locality.
- */
- sram_pool = gen_pool_create(1, -1);
- if (unlikely(!sram_pool))
- return -ENOMEM;
-
- return 0;
-}
-core_initcall(sram_pool_init);
diff --git a/arch/sh/mm/tlb-debugfs.c b/arch/sh/mm/tlb-debugfs.c
deleted file mode 100644
index 11c6148283f3c7..00000000000000
--- a/arch/sh/mm/tlb-debugfs.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/sh/mm/tlb-debugfs.c
- *
- * debugfs ops for SH-4 ITLB/UTLBs.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-enum tlb_type {
- TLB_TYPE_ITLB,
- TLB_TYPE_UTLB,
-};
-
-static struct {
- int bits;
- const char *size;
-} tlb_sizes[] = {
- { 0x0, " 1KB" },
- { 0x1, " 4KB" },
- { 0x2, " 8KB" },
- { 0x4, " 64KB" },
- { 0x5, "256KB" },
- { 0x7, " 1MB" },
- { 0x8, " 4MB" },
- { 0xc, " 64MB" },
-};
-
-static int tlb_seq_show(struct seq_file *file, void *iter)
-{
- unsigned int tlb_type = (unsigned int)file->private;
- unsigned long addr1, addr2, data1, data2;
- unsigned long flags;
- unsigned long mmucr;
- unsigned int nentries, entry;
- unsigned int urb;
-
- mmucr = __raw_readl(MMUCR);
- if ((mmucr & 0x1) == 0) {
- seq_printf(file, "address translation disabled\n");
- return 0;
- }
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- local_irq_save(flags);
- jump_to_uncached();
-
- urb = (mmucr & MMUCR_URB) >> MMUCR_URB_SHIFT;
-
- /* Make the "entry >= urb" test fail. */
- if (urb == 0)
- urb = MMUCR_URB_NENTRIES + 1;
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- seq_printf(file, "entry: vpn ppn asid size valid wired\n");
-
- for (entry = 0; entry < nentries; entry++) {
- unsigned long vpn, ppn, asid, size;
- unsigned long valid;
- unsigned long val;
- const char *sz = " ?";
- int i;
-
- val = __raw_readl(addr1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- vpn = val & 0xfffffc00;
- valid = val & 0x100;
-
- val = __raw_readl(addr2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- asid = val & MMU_CONTEXT_ASID_MASK;
-
- val = __raw_readl(data1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- ppn = (val & 0x0ffffc00) << 4;
-
- val = __raw_readl(data2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- size = (val & 0xf0) >> 4;
-
- for (i = 0; i < ARRAY_SIZE(tlb_sizes); i++) {
- if (tlb_sizes[i].bits == size)
- break;
- }
-
- if (i != ARRAY_SIZE(tlb_sizes))
- sz = tlb_sizes[i].size;
-
- seq_printf(file, "%2d: 0x%08lx 0x%08lx %5lu %s %s %s\n",
- entry, vpn, ppn, asid,
- sz, valid ? "V" : "-",
- (urb <= entry) ? "W" : "-");
- }
-
- back_to_cached();
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int tlb_debugfs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, tlb_seq_show, inode->i_private);
-}
-
-static const struct file_operations tlb_debugfs_fops = {
- .owner = THIS_MODULE,
- .open = tlb_debugfs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init tlb_debugfs_init(void)
-{
- debugfs_create_file("itlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_ITLB, &tlb_debugfs_fops);
- debugfs_create_file("utlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_UTLB, &tlb_debugfs_fops);
- return 0;
-}
-module_init(tlb_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
deleted file mode 100644
index 4db21adfe5deba..00000000000000
--- a/arch/sh/mm/tlb-pteaex.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/sh/mm/tlb-pteaex.c
- *
- * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = address & MMU_VPN_MASK;
- __raw_writel(vpn, MMU_PTEH);
-
- /* Set PTEAEX */
- __raw_writel(get_asid(), MMU_PTEAEX);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-/*
- * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
- * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
- * address arrays. In compat mode the second array is inaccessible, while
- * in extended mode, the legacy 8-bit ASID field in address array 1 has
- * undefined behaviour.
- */
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- jump_to_uncached();
- __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
deleted file mode 100644
index fb400afc2a496a..00000000000000
--- a/arch/sh/mm/tlb-sh3.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh3.c
- *
- * SH-3 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte_val(pte);
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
- int i, ways = MMU_NTLB_WAYS;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
- data = (page & 0xfffe0000) | asid; /* VALID bit is off */
-
- if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) {
- addr |= MMU_PAGE_ASSOC_BIT;
- ways = 1; /* we already know the way .. */
- }
-
- for (i = 0; i < ways; i++)
- __raw_writel(data, addr + (i << 8));
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
-
- /*
- * Flush all the TLB.
- *
- * Write to the MMU control register's bit:
- * TF-bit for SH-3, TI-bit for SH-4.
- * It's same position, bit #2.
- */
- local_irq_save(flags);
- status = __raw_readl(MMUCR);
- status |= 0x04;
- __raw_writel(status, MMUCR);
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
deleted file mode 100644
index aa0a9f4680a1b1..00000000000000
--- a/arch/sh/mm/tlb-sh4.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh4.c
- *
- * SH-4 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#else
- if (cpu_data->flags & CPU_HAS_PTEA) {
- /* The last 3 bits and the first one of pteval contains
- * the PTEA timing control and space attribute bits
- */
- __raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
- }
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
- data = page | asid; /* VALID bit is off */
- jump_to_uncached();
- __raw_writel(data, addr);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c
deleted file mode 100644
index c92ce20db39bf4..00000000000000
--- a/arch/sh/mm/tlb-urb.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/sh/mm/tlb-urb.c
- *
- * TLB entry wiring helpers for URB-equipped parts.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/*
- * Load the entry for 'addr' into the TLB and wire the entry.
- */
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URC;
-
- /*
- * Make sure we're not trying to wire the last TLB entry slot.
- */
- BUG_ON(!--urb);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- /*
- * Insert this entry into the highest non-wired TLB slot (via
- * the URC field).
- */
- status |= (urb << MMUCR_URC_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- /* Load the entry into the TLB */
- __update_tlb(vma, addr, pte);
-
- /* ... and wire it up. */
- status = __raw_readl(MMUCR);
-
- status &= ~MMUCR_URB;
- status |= (urb << MMUCR_URB_SHIFT);
-
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
-
-/*
- * Unwire the last wired TLB entry.
- *
- * It should also be noted that it is not possible to wire and unwire
- * TLB entries in an arbitrary order. If you wire TLB entry N, followed
- * by entry N+1, you must unwire entry N+1 first, then entry N. In this
- * respect, it works like a stack or LIFO queue.
- */
-void tlb_unwire_entry(void)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URB;
-
- /*
- * Make sure we're not trying to unwire a TLB entry when none
- * have been wired.
- */
- BUG_ON(urb++ == MMUCR_URB_NENTRIES);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- status |= (urb << MMUCR_URB_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlbex_32.c b/arch/sh/mm/tlbex_32.c
deleted file mode 100644
index 1c53868632ee4c..00000000000000
--- a/arch/sh/mm/tlbex_32.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * TLB miss handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <asm/mmu_context.h>
-#include <asm/thread_info.h>
-
-/*
- * Called with interrupts disabled.
- */
-asmlinkage int __kprobes
-handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
-
- /*
- * We don't take page faults for P1, P2, and parts of P4, these
- * are always mapped, whether it be due to legacy behaviour in
- * 29-bit mode, or due to PMB configuration in 32-bit mode.
- */
- if (address >= P3SEG && address < P3_ADDR_MAX) {
- pgd = pgd_offset_k(address);
- } else {
- if (unlikely(address >= TASK_SIZE || !current->mm))
- return 1;
-
- pgd = pgd_offset(current->mm, address);
- }
-
- p4d = p4d_offset(pgd, address);
- if (p4d_none_or_clear_bad(p4d))
- return 1;
- pud = pud_offset(p4d, address);
- if (pud_none_or_clear_bad(pud))
- return 1;
- pmd = pmd_offset(pud, address);
- if (pmd_none_or_clear_bad(pmd))
- return 1;
- pte = pte_offset_kernel(pmd, address);
- entry = *pte;
- if (unlikely(pte_none(entry) || pte_not_present(entry)))
- return 1;
- if (unlikely(error_code && !pte_write(entry)))
- return 1;
-
- if (error_code)
- entry = pte_mkdirty(entry);
- entry = pte_mkyoung(entry);
-
- set_pte(pte, entry);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
- /*
- * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
- * the case of an initial page write exception, so we need to
- * flush it in order to avoid potential TLB entry duplication.
- */
- if (error_code == FAULT_CODE_INITIAL)
- local_flush_tlb_one(get_asid(), address & PAGE_MASK);
-#endif
-
- set_thread_fault_code(error_code);
- update_mmu_cache(NULL, address, pte);
-
- return 0;
-}
diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c
deleted file mode 100644
index a6a20d6de4c0b9..00000000000000
--- a/arch/sh/mm/tlbflush_32.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * TLB flushing operations for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned int cpu = smp_processor_id();
-
- if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) {
- unsigned long flags;
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, vma->vm_mm);
- page &= PAGE_MASK;
-
- local_irq_save(flags);
- if (vma->vm_mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- local_flush_tlb_one(asid, page);
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- } else {
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- if (mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- local_flush_tlb_all();
- } else {
- unsigned long asid;
- unsigned long saved_asid = get_asid();
-
- asid = cpu_asid(cpu, &init_mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- set_asid(asid);
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Invalidate all TLB of this process. */
- /* Instead of invalidating each TLB, we get new MMU context. */
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
-
- local_irq_save(flags);
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- local_irq_restore(flags);
- }
-}
-
-void __flush_tlb_global(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- /*
- * This is the most destructive of the TLB flushing options,
- * and will tear down all of the UTLB/ITLB mappings, including
- * wired entries.
- */
- __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
deleted file mode 100644
index bd1585e8efed92..00000000000000
--- a/arch/sh/mm/uncached.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sizes.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-
-/*
- * This is the offset of the uncached section from its cached alias.
- *
- * Legacy platforms handle trivial transitions between cached and
- * uncached segments by making use of the 1:1 mapping relationship in
- * 512MB lowmem, others via a special uncached mapping.
- *
- * Default value only valid in 29 bit mode, in 32bit mode this will be
- * updated by the early PMB initialization code.
- */
-unsigned long cached_to_uncached = SZ_512M;
-unsigned long uncached_size = SZ_512M;
-unsigned long uncached_start, uncached_end;
-EXPORT_SYMBOL(uncached_start);
-EXPORT_SYMBOL(uncached_end);
-
-int virt_addr_uncached(unsigned long kaddr)
-{
- return (kaddr >= uncached_start) && (kaddr < uncached_end);
-}
-EXPORT_SYMBOL(virt_addr_uncached);
-
-void __init uncached_init(void)
-{
-#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
- uncached_start = P2SEG;
-#else
- uncached_start = memory_end;
-#endif
- uncached_end = uncached_start + uncached_size;
-}
-
-void __init uncached_resize(unsigned long size)
-{
- uncached_size = size;
- uncached_end = uncached_start + uncached_size;
-}
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
deleted file mode 100644
index e5ba31c79fe0af..00000000000000
--- a/arch/sh/tools/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# arch/sh/tools/Makefile
-#
-# Copyright (C) 2003 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Shamelessly cloned from ARM.
-#
-
-include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
- @echo ' Generating $@'
- $(Q)mkdir -p $(dir $@)
- $(Q)LC_ALL=C $(AWK) -f $^ > $@
diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types
deleted file mode 100644
index 6d7c2d8eaf5504..00000000000000
--- a/arch/sh/tools/gen-mach-types
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/awk
-# SPDX-License-Identifier: GPL-2.0
-#
-# Awk script to generate include/generated/machtypes.h
-# Heavily based on arch/arm/tools/gen-mach-types
-#
-BEGIN { nr = 0 }
-/^#/ { next }
-/^[ ]*$/ { next }
-
-NF == 2 {
- mach[nr] = $1;
- config[nr] = "CONFIG_"$2;
- nr++;
- }
-
-END {
- printf("/*\n");
- printf(" * Automagically generated, don't touch.\n");
- printf(" */\n");
- printf("#ifndef __ASM_SH_MACHTYPES_H\n");
- printf("#define __ASM_SH_MACHTYPES_H\n");
- printf("\n");
- printf("/*\n");
- printf(" * We'll use the following MACH_xxx defs for placeholders for the time\n");
- printf(" * being .. these will all go away once sh_machtype is assigned per-board.\n");
- printf(" *\n");
- printf(" * For now we leave things the way they are for backwards compatibility.\n");
- printf(" */\n");
- printf("\n");
- printf("/* Mach types */\n");
-
- for (i = 0; i < nr; i++) {
- printf("#ifdef %s\n", config[i]);
- printf(" #define MACH_%s\t\t1\n", mach[i]);
- printf("#else\n");
- printf(" #define MACH_%s\t\t0\n", mach[i]);
- printf("#endif\n");
- }
-
- printf("\n");
- printf("/* Machtype checks */\n");
- for (i = 0; i < nr; i++)
- printf("#define mach_is_%s()\t\t\t(MACH_%s)\n",
- tolower(mach[i]), mach[i]);
- printf("\n");
- printf("#endif /* __ASM_SH_MACHTYPES_H */\n");
- }
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
deleted file mode 100644
index 29e648855d509f..00000000000000
--- a/arch/sh/tools/mach-types
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# MACH_<xxx> CONFIG_<xxx>
-#
-
-#
-# List of board groups.
-#
-SE SH_SOLUTION_ENGINE
-HIGHLANDER SH_HIGHLANDER
-RTS7751R2D SH_RTS7751R2D
-RSK SH_RSK
-ALPHA_BOARD SH_ALPHA_BOARD
-
-#
-# List of companion chips / MFDs.
-#
-HD64461 HD64461
-
-#
-# List of boards.
-#
-7206SE SH_7206_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
-7619SE SH_7619_SOLUTION_ENGINE
-7721SE SH_7721_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7724SE SH_7724_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7780SE SH_7780_SOLUTION_ENGINE
-HP6XX SH_HP6XX
-DREAMCAST SH_DREAMCAST
-SNAPGEAR SH_SECUREEDGE5410
-EDOSK7705 SH_EDOSK7705
-EDOSK7760 SH_EDOSK7760
-SDK7786 SH_SDK7786
-SH4202_MICRODEV SH_SH4202_MICRODEV
-SH03 SH_SH03
-LANDISK SH_LANDISK
-R7780RP SH_R7780RP
-R7780MP SH_R7780MP
-R7785RP SH_R7785RP
-TITAN SH_TITAN
-SHMIN SH_SHMIN
-LBOXRE2 SH_LBOX_RE2
-X3PROTO SH_X3PROTO
-MAGICPANELR2 SH_MAGIC_PANEL_R2
-R2D_PLUS RTS7751R2D_PLUS
-R2D_1 RTS7751R2D_1
-SDK7780 SH_SDK7780
-MIGOR SH_MIGOR
-RSK7201 SH_RSK7201
-RSK7203 SH_RSK7203
-RSK7264 SH_RSK7264
-RSK7269 SH_RSK7269
-AP325RXA SH_AP325RXA
-SH2007 SH_SH2007
-SH7757LCR SH_SH7757LCR
-SH7763RDP SH_SH7763RDP
-SH7785LCR SH_SH7785LCR
-SH7785LCR_PT SH_SH7785LCR_PT
-URQUELL SH_URQUELL
-ESPT SH_ESPT
-POLARIS SH_POLARIS
-KFR2R09 SH_KFR2R09
-ECOVEC SH_ECOVEC
-APSH4A3A SH_APSH4A3A
-APSH4AD0A SH_APSH4AD0A
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7b952aa52c0b99..7fed3529bbaf82 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -26,10 +26,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_cmt_device;
/*
@@ -1170,10 +1166,6 @@ static void __exit sh_cmt_exit(void)
platform_driver_unregister(&sh_cmt_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
-#endif
-
subsys_initcall(sh_cmt_init);
module_exit(sh_cmt_exit);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 169a1fccc49749..e81e978513f80e 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -23,10 +23,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_mtu2_device;
struct sh_mtu2_channel {
@@ -521,10 +517,6 @@ static void __exit sh_mtu2_exit(void)
platform_driver_unregister(&sh_mtu2_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_mtu2_device_driver);
-#endif
-
subsys_initcall(sh_mtu2_init);
module_exit(sh_mtu2_exit);
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index b00dec0655cb28..596e9146ad54e9 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -24,10 +24,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
enum sh_tmu_model {
SH_TMU,
SH_TMU_SH3,
@@ -670,10 +666,6 @@ static void __exit sh_tmu_exit(void)
platform_driver_unregister(&sh_tmu_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
-#endif
-
subsys_initcall(sh_tmu_init);
module_exit(sh_tmu_exit);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a7bfddf08fa7ba..22602c512a6e50 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1027,7 +1027,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
@@ -1112,7 +1112,7 @@ config I2C_SYNQUACER
config I2C_TEGRA
tristate "NVIDIA Tegra internal I2C controller"
- depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC))
+ depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SPARC))
# COMPILE_TEST needs architectures with readsX()/writesX() primitives
help
If you say yes to this option, support will be included for the
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index ed788e991f74b3..0231672a7e1c32 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_RENESAS_CEU
tristate "Renesas Capture Engine Unit (CEU) driver"
depends on V4L_PLATFORM_DRIVERS
depends on VIDEO_DEV
- depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
+ depends on ARCH_R7S72100 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5e19a961c34d7b..4d421d4030b7c9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -720,7 +720,7 @@ config MMC_TMIO
config MMC_SDHI
tristate "Renesas SDHI SD/SDIO controller support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select MMC_TMIO_CORE
select RESET_CONTROLLER if ARCH_RENESAS
help
@@ -730,7 +730,7 @@ config MMC_SDHI
config MMC_SDHI_SYS_DMAC
tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
depends on MMC_SDHI
- default MMC_SDHI if (SUPERH || ARM)
+ default MMC_SDHI if ARM
help
This provides DMA support for SDHI SD/SDIO controllers
using SYS-DMAC via DMA Engine. This supports the controllers
@@ -882,7 +882,7 @@ config MMC_DW_ROCKCHIP
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF) found in various
Renesas SoCs for SH and ARM architectures.
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 0fd4c9d644dd51..96b9a19697b985 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -427,21 +427,12 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host)
host->dma_active = false;
/* We can only either use DMA for both Tx and Rx or not use it at all */
- if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) {
- struct sh_mmcif_plat_data *pdata = dev->platform_data;
-
- host->chan_tx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_tx);
- host->chan_rx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_rx);
- } else {
- host->chan_tx = dma_request_chan(dev, "tx");
- if (IS_ERR(host->chan_tx))
- host->chan_tx = NULL;
- host->chan_rx = dma_request_chan(dev, "rx");
- if (IS_ERR(host->chan_rx))
- host->chan_rx = NULL;
- }
+ host->chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(host->chan_tx))
+ host->chan_tx = NULL;
+ host->chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(host->chan_rx))
+ host->chan_rx = NULL;
dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx,
host->chan_rx);
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342f2..eb90de04c88419 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -31,7 +31,7 @@ config PCMCIA_AXNET
config AX88796
tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
- depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
+ depends on (ARM || MIPS || ZORRO || COMPILE_TEST)
select CRC32
select PHYLIB
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 3ceb57408ed0c0..c48164ec682f50 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_RENESAS
config SH_ETH
tristate "Renesas SuperH Ethernet support"
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select CRC32
select MII
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b97..a6ddc3d07534ad 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_SMSC
default y
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
ISA || MAC || MIPS || NIOS2 || PCI || \
- PCMCIA || SUPERH || XTENSA || COMPILE_TEST
+ PCMCIA || XTENSA || COMPILE_TEST
help
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -40,7 +40,7 @@ config SMC91X
select MII
depends on !OF || GPIOLIB
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
- MIPS || NIOS2 || SUPERH || XTENSA || COMPILE_TEST
+ MIPS || NIOS2 || XTENSA || COMPILE_TEST
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 677d2601d30571..db9e2c516b5ff1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1452,7 +1452,7 @@ config RTC_DRV_SA1100
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on SUPERH || ARCH_RENESAS
+ depends on ARCH_RENESAS
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors. This RTC is also found in RZ/A SoCs.
@@ -1544,7 +1544,7 @@ config RTC_DRV_GENERIC
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
+ depends on PARISC || M68K || PPC || COMPILE_TEST
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index cd146b5741431f..2151a3b7c5b986 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -25,15 +25,12 @@
#include <linux/log2.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#ifdef CONFIG_SUPERH
-#include <asm/rtc.h>
-#else
+
/* Default values for RZ/A RTC */
#define rtc_reg_size sizeof(u16)
#define RTC_BIT_INVERTED 0 /* no chip bugs */
#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-#endif
#define DRV_NAME "sh-rtc"
@@ -537,19 +534,6 @@ static int __init sh_rtc_probe(struct platform_device *pdev)
rtc->capabilities = RTC_DEF_CAPABILITIES;
-#ifdef CONFIG_SUPERH
- if (dev_get_platdata(&pdev->dev)) {
- struct sh_rtc_platform_info *pinfo =
- dev_get_platdata(&pdev->dev);
-
- /*
- * Some CPUs have special capabilities in addition to the
- * default set. Add those in here.
- */
- rtc->capabilities |= pinfo->capabilities;
- }
-#endif
-
if (rtc->carry_irq <= 0) {
/* register shared periodic/carry/alarm irq */
ret = devm_request_irq(&pdev->dev, rtc->periodic_irq,
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3b1c0878bb8572..2c5226adf5e1d3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -809,7 +809,7 @@ config SPI_RPCIF
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for Renesas RSPI and QSPI blocks.
@@ -878,7 +878,7 @@ config SPI_SC18IS602
config SPI_SH_MSIOF
tristate "SuperH MSIOF SPI controller"
depends on HAVE_CLK
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c55b947f3cdbb7..32f8ffd423cbb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -641,7 +641,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -650,7 +650,6 @@ config SERIAL_SH_SCI_NR_UARTS
range 1 64 if 64BIT
range 1 32 if !64BIT
depends on SERIAL_SH_SCI
- default "10" if SUPERH
default "18" if ARCH_RENESAS
default "2"
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7bd0807209299b..cc475670181529 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -49,11 +49,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#ifdef CONFIG_SUPERH
-#include <asm/sh_bios.h>
-#include <asm/platform_early.h>
-#endif
-
#include "serial_mctrl_gpio.h"
#include "sh-sci.h"
@@ -3050,49 +3045,6 @@ static struct console serial_console = {
.data = &sci_uart_driver,
};
-#ifdef CONFIG_SUPERH
-static char early_serial_buf[32];
-
-static int early_serial_console_setup(struct console *co, char *options)
-{
- /*
- * This early console is always registered using the earlyprintk=
- * parameter, which does not call add_preferred_console(). Thus
- * @options is always NULL and the options for this early console
- * are passed using a custom buffer.
- */
- WARN_ON(options);
-
- return serial_console_setup(co, early_serial_buf);
-}
-
-static struct console early_serial_console = {
- .name = "early_ttySC",
- .write = serial_console_write,
- .setup = early_serial_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int sci_probe_earlyprintk(struct platform_device *pdev)
-{
- const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
-
- if (early_serial_console.data)
- return -EEXIST;
-
- early_serial_console.index = pdev->id;
-
- sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
-
- if (!strstr(early_serial_buf, "keep"))
- early_serial_console.flags |= CON_BOOT;
-
- register_console(&early_serial_console);
- return 0;
-}
-#endif
-
#define SCI_CONSOLE (&serial_console)
#else
@@ -3323,11 +3275,6 @@ static int sci_probe(struct platform_device *dev)
* the special early probe. We don't have sufficient device state
* to make it beyond this yet.
*/
-#ifdef CONFIG_SUPERH
- if (is_sh_early_platform_device(dev))
- return sci_probe_earlyprintk(dev);
-#endif
-
if (dev->dev.of_node) {
p = sci_parse_dt(dev, &dev_id);
if (IS_ERR(p))
@@ -3421,10 +3368,6 @@ static void __exit sci_exit(void)
uart_unregister_driver(&sci_uart_driver);
}
-#if defined(CONFIG_SUPERH) && defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-sh_early_platform_init_buffer("earlyprintk", &sci_driver,
- early_serial_buf, ARRAY_SIZE(early_serial_buf));
-#endif
#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
static struct plat_sci_port port_cfg __initdata;
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index be8313cdbac360..fa9082f941feeb 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1275,7 +1275,7 @@ static void kbd_bh(struct tasklet_struct *unused)
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
- defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+ defined(CONFIG_PARISC) ||\
(defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
static inline bool kbd_is_hw_raw(const struct input_dev *dev)
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index d6b3fef3e55b03..be240d11cfb49a 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -6,7 +6,7 @@
config USB_RENESAS_USBHS
tristate 'Renesas USBHS controller'
depends on USB_GADGET
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in
help
Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 22cea5082ac461..9860caa3512816 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -7,7 +7,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 6d6f8c08792dc8..e75b514b721b3f 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -53,19 +53,4 @@ config LOGO_SUN_CLUT224
depends on SPARC
default y
-config LOGO_SUPERH_MONO
- bool "Black and white SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_VGA16
- bool "16-color SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_CLUT224
- bool "224-color SuperH Linux logo"
- depends on SUPERH
- default y
-
endif # LOGO
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 895c60b8402ea1..c4f348fa400741 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -10,9 +10,6 @@ obj-$(CONFIG_LOGO_MAC_CLUT224) += logo_mac_clut224.o
obj-$(CONFIG_LOGO_PARISC_CLUT224) += logo_parisc_clut224.o
obj-$(CONFIG_LOGO_SGI_CLUT224) += logo_sgi_clut224.o
obj-$(CONFIG_LOGO_SUN_CLUT224) += logo_sun_clut224.o
-obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_superh_mono.o
-obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
-obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 141f15a9a45906..0269def4262117 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -52,10 +52,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_MONO
/* Generic Linux logo */
logo = &logo_linux_mono;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_MONO
- /* SuperH Linux logo */
- logo = &logo_superh_mono;
#endif
}
@@ -63,10 +59,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_VGA16
/* Generic Linux logo */
logo = &logo_linux_vga16;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_VGA16
- /* SuperH Linux logo */
- logo = &logo_superh_vga16;
#endif
}
@@ -95,10 +87,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_SUN_CLUT224
/* Sun Linux logo */
logo = &logo_sun_clut224;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_CLUT224
- /* SuperH Linux logo */
- logo = &logo_superh_clut224;
#endif
}
return logo;
diff --git a/drivers/video/logo/logo_superh_clut224.ppm b/drivers/video/logo/logo_superh_clut224.ppm
deleted file mode 100644
index 0241aacee18009..00000000000000
--- a/drivers/video/logo/logo_superh_clut224.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 224-color SuperH Linux logo
-80 80
-255
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 10 10 10 10 10 10
- 10 10 10 6 6 6 6 6 6 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 10 10 10 14 14 13
- 22 22 22 26 26 26 30 30 30 34 34 34
- 30 30 30 30 30 30 26 26 26 18 18 18
- 14 14 13 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 26 26 26 42 42 43
- 54 54 54 66 66 66 78 78 78 78 78 78
- 78 78 78 74 74 74 66 66 66 54 54 54
- 42 42 43 26 26 26 18 18 18 10 10 10
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 22 22 22 42 42 43 66 66 66 86 86 86
- 66 66 66 38 38 38 38 38 38 22 22 22
- 26 26 26 34 34 34 54 54 54 66 66 66
- 86 86 86 70 70 70 46 46 46 26 26 26
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 50 50 50 82 82 82 58 58 58 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 54 54 54 86 86 86 66 66 66
- 38 38 38 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 78 78 78 34 34 34 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 70 70 70
- 78 78 78 46 46 46 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 42 42 43 82 82 82
- 26 26 26 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 46 46 46 34 34 34 6 6 6 2 2 6
- 42 42 43 78 78 78 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 30 30 30 66 66 66 58 58 58
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 86 86 86 102 102 102 46 46 46 10 10 10
- 2 2 6 58 58 58 70 70 70 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 86 86 86 10 10 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 30 30 30
- 94 94 93 94 94 93 58 58 58 26 26 26
- 2 2 6 6 6 6 78 78 78 54 54 54
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 62 62 62 62 62 62 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 54 54 54 38 38 38 18 18 18 10 10 10
- 2 2 6 2 2 6 34 34 34 82 82 82
- 38 38 38 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 10 10 10 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 54 54 54
- 66 66 66 26 26 26 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 82 82 82 2 2 6 2 2 6
- 2 2 6 6 6 6 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 6 6 6
- 14 14 13 10 10 10 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 18 18 18
- 82 82 82 34 34 34 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 6 6 6 6 6 6 22 22 22 34 34 34
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 34 34 34
- 10 10 10 50 50 50 22 22 22 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 86 86 86 42 42 43 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 38 38 38 118 118 118 94 94 93 22 22 22
- 22 22 22 2 2 6 2 2 6 2 2 6
- 14 14 13 86 86 86 138 138 142 163 163 163
-154 154 154 38 38 38 26 26 26 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 14 14 13
-134 134 134 198 198 196 194 194 194 118 118 118
- 10 10 10 2 2 6 2 2 6 6 6 6
-102 98 90 186 186 186 210 210 210 218 218 218
-214 214 214 134 134 134 14 14 13 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 50 50 50 18 18 18 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 54 54 54
-218 218 218 194 194 194 226 226 226 246 246 246
- 58 58 58 2 2 6 2 2 6 30 30 30
-210 210 210 254 254 254 174 174 174 122 122 122
-223 222 222 234 234 234 74 74 74 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 82 82 82 2 2 6 106 106 105
-170 170 170 26 26 26 86 86 86 226 226 226
-122 122 122 10 10 10 14 14 13 46 46 46
-230 230 228 190 190 187 6 6 6 70 70 70
- 89 90 90 238 238 238 158 158 158 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 86 86 86 6 6 6 118 118 118
-106 106 105 6 6 6 70 70 70 150 150 150
-130 130 130 18 18 18 38 38 38 54 54 54
-223 222 222 106 106 105 2 2 6 14 14 13
- 46 46 46 190 190 187 198 198 196 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 94 94 93 14 14 13 102 102 102
-130 130 130 2 2 6 18 18 18 118 118 118
-122 100 66 122 94 10 122 94 10 104 78 10
-163 163 163 106 106 105 2 2 6 2 2 6
- 2 2 6 194 194 194 194 194 194 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 89 90 90 14 14 13 58 58 58
-210 210 210 26 26 26 60 40 9 154 114 10
-226 170 10 241 186 13 229 174 11 186 146 17
-214 174 14 178 147 70 38 26 10 2 2 6
- 70 70 70 246 246 246 138 138 142 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 66 66 66 26 26 26 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 10 10 10
-194 194 194 190 166 114 195 134 10 229 174 11
-238 182 14 234 190 10 234 196 18 238 202 21
-246 206 46 244 212 20 234 196 18 186 146 17
-218 194 134 206 206 194 42 42 43 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 74 74 74 30 30 30 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 86 86 86 14 14 13 2 2 6
-122 86 26 195 134 10 220 162 10 238 182 14
-241 186 13 234 196 18 244 212 20 246 217 53
-246 217 53 246 217 39 244 212 20 244 212 20
-244 212 20 224 188 14 122 86 26 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 82 82 82 34 34 34 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 82 82 82 30 30 30 60 40 9
-181 122 9 204 146 11 229 174 11 238 182 14
-234 190 10 238 202 21 244 212 20 246 218 74
-246 217 39 244 212 20 244 212 20 244 212 20
-224 188 14 214 174 14 186 146 17 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 26 26 26 94 94 93 42 42 43 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 50 50 50 105 70 7
-195 134 10 219 158 11 238 178 14 241 186 13
-234 196 18 244 212 20 246 217 53 241 214 34
-244 212 20 244 212 20 244 212 20 197 151 13
-204 146 11 219 158 11 158 118 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 89 90 90 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 46 46 46 22 22 22
-138 94 6 210 162 12 238 182 14 238 190 10
-238 202 21 244 212 20 244 212 20 244 212 20
-244 212 20 202 164 20 186 134 10 211 150 11
-219 158 11 211 150 11 104 78 10 2 2 6
- 6 6 6 54 54 54 14 14 13 2 2 6
- 2 2 6 62 62 62 74 74 74 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 78 78 78 50 50 50 6 6 6
- 92 69 26 138 102 14 190 146 14 224 188 14
-238 202 21 234 196 18 214 174 14 190 146 14
-170 122 12 195 134 10 211 150 11 214 154 10
-202 147 31 182 158 106 102 98 90 2 2 6
- 2 2 6 78 78 78 118 118 118 58 58 58
- 2 2 6 22 22 22 89 90 90 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 50 50 50 6 6 6
-130 130 130 173 154 115 158 106 9 170 122 12
-197 151 13 186 146 17 197 139 12 204 146 11
-204 146 11 204 146 11 197 139 12 190 166 114
-194 194 194 198 198 196 174 174 174 14 14 13
- 2 2 6 22 22 22 118 118 118 118 118 118
- 22 22 22 2 2 6 74 74 74 70 70 70
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 102 102 102 26 26 26 10 10 10
-138 138 142 190 190 187 173 154 115 158 106 9
-197 139 12 204 146 11 197 139 12 195 134 10
-181 122 9 188 140 34 191 178 145 186 186 186
-201 202 203 223 222 222 214 214 214 66 66 66
- 2 2 6 2 2 6 50 50 50 62 62 62
- 6 6 6 2 2 6 10 10 10 89 90 90
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 34 34 34
- 74 74 74 74 74 74 2 2 6 6 6 6
-146 146 146 198 198 196 190 190 187 178 166 146
-154 122 54 158 106 9 158 106 9 170 126 38
-173 154 115 186 186 186 190 190 187 210 210 210
-246 246 246 254 254 254 254 254 254 182 182 182
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 62 62 62
- 74 74 74 34 34 34 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 22 22 22 54 54 54
- 94 94 93 18 18 18 2 2 6 46 46 46
-234 234 234 223 222 222 190 190 187 190 190 187
-190 190 187 186 186 186 186 186 186 190 190 187
-190 190 187 194 194 194 214 214 214 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
- 82 82 82 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 86 86 86 54 54 54 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 46 46 46 89 90 90
- 46 46 46 18 18 18 6 6 6 182 182 182
-254 254 254 246 246 246 206 206 206 190 190 187
-190 190 187 190 190 187 190 190 187 190 190 187
-206 206 206 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-201 202 203 14 14 13 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 86 86 86 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 14 14 13 38 38 38 74 74 74 66 66 66
- 2 2 6 6 6 6 89 90 90 250 250 250
-254 254 254 254 254 254 238 238 238 198 198 196
-190 190 187 190 190 187 194 194 194 223 222 222
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 82 82 82 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 78 78 78 70 70 70 34 34 34
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 34 34 34 66 66 66 78 78 78 6 6 6
- 2 2 6 18 18 18 218 218 218 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-226 226 226 230 230 228 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 174 174 174 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 18 18 18 89 90 90 62 62 62
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 58 58 58 89 90 90 18 18 18 2 2 6
- 2 2 6 110 110 110 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 18 18 18 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 94 94 93
- 54 54 54 26 26 26 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 89 90 90 26 26 26 2 2 6 2 2 6
- 14 14 13 194 194 194 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 242 242 242 54 54 54 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 86 86 86 50 50 50 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 38 38 38 82 82 82
- 34 34 34 2 2 6 2 2 6 2 2 6
- 42 42 43 194 194 194 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 242 242 242 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 246 246 246 238 238 238
-226 226 226 230 230 228 102 102 102 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 38 38 38 82 82 82 42 42 43 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 62 62 62 66 66 66
- 2 2 6 2 2 6 2 2 6 6 6 6
- 70 70 70 170 170 170 206 206 206 234 234 234
-246 246 246 250 250 250 250 250 250 238 238 238
-226 226 226 230 230 228 238 238 238 250 250 250
-250 250 250 250 250 250 246 246 246 230 230 228
-214 214 214 206 206 206 201 202 203 201 202 203
-198 198 196 201 202 203 182 182 182 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 62 62 62 66 66 66 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 82 82 82 18 18 18
- 2 2 6 2 2 6 2 2 6 10 10 10
- 94 94 93 182 182 182 218 218 218 242 242 242
-250 250 250 254 254 254 254 254 254 250 250 250
-234 234 234 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-238 238 238 226 226 226 210 210 210 201 202 203
-194 194 194 194 194 194 210 210 210 158 158 158
- 6 6 6 14 14 13 50 50 50 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 86 86 86 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 70 70 70 2 2 6
- 2 2 6 10 10 10 2 2 6 22 22 22
-166 166 166 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-230 230 228 206 206 206 198 198 196 226 226 226
- 94 94 93 2 2 6 6 6 6 38 38 38
- 30 30 30 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 62 62 62 66 66 66
- 26 26 26 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 74 74 74 50 50 50 2 2 6
- 26 26 26 26 26 26 2 2 6 106 106 105
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 218 218 218 201 202 203
-210 210 210 14 14 13 2 2 6 2 2 6
- 30 30 30 22 22 22 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 86 86 86
- 42 42 43 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 89 90 90 22 22 22 2 2 6
- 42 42 43 2 2 6 18 18 18 218 218 218
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 223 222 222
-218 218 218 102 102 102 2 2 6 14 14 13
- 18 18 18 38 38 38 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 58 58 58 22 22 22 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 82 82 82 2 2 6 26 26 26
- 22 22 22 2 2 6 122 122 122 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-238 238 238 198 198 196 6 6 6 38 38 38
- 58 58 58 26 26 26 38 38 38 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 78 78 78 30 30 30 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 30 30 30
- 74 74 74 58 58 58 2 2 6 42 42 43
- 2 2 6 22 22 22 230 230 228 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 46 46 46 38 38 38
- 42 42 43 14 14 13 38 38 38 14 14 13
- 2 2 6 2 2 6 2 2 6 6 6 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 42 42 43
- 89 90 90 18 18 18 18 18 18 26 26 26
- 2 2 6 118 118 118 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 94 94 93 6 6 6
- 2 2 6 2 2 6 10 10 10 34 34 34
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 26 26 26 66 66 66
- 82 82 82 2 2 6 38 38 38 6 6 6
- 14 14 13 210 210 210 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 246 246 246 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 146 146 146 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 74 74 74 30 30 30 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 42 42 43 89 90 90
- 26 26 26 6 6 6 42 42 43 2 2 6
- 74 74 74 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 242 242 242 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 182 182 182 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 10 10 10 86 86 86 38 38 38 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 66 66 66 82 82 82
- 2 2 6 22 22 22 18 18 18 2 2 6
-150 150 150 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 86 86 86 46 46 46 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 46 46 46 86 86 86 18 18 18
- 2 2 6 34 34 34 10 10 10 6 6 6
-210 210 210 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 223 222 222 6 6 6
- 2 2 6 2 2 6 6 6 6 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 26 26 26 66 66 66 62 62 62 2 2 6
- 2 2 6 38 38 38 10 10 10 26 26 26
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 6 6 6
- 2 2 6 2 2 6 10 10 10 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 78 78 78 6 6 6 2 2 6
- 2 2 6 46 46 46 14 14 13 42 42 43
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 10 10 10
- 2 2 6 2 2 6 22 22 22 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 74 74 74 2 2 6 2 2 6
- 14 14 13 70 70 70 34 34 34 62 62 62
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 14 14 13
- 2 2 6 2 2 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 62 62 62 2 2 6 2 2 6
- 2 2 6 30 30 30 46 46 46 70 70 70
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 226 226 226 10 10 10
- 2 2 6 6 6 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 22 22 22
- 58 58 58 62 62 62 2 2 6 2 2 6
- 2 2 6 2 2 6 30 30 30 78 78 78
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 22 22 22 34 34 34 18 14 6 22 22 22
- 26 26 26 18 18 18 6 6 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 26 26 26
- 62 62 62 106 106 105 74 51 11 186 134 10
-210 162 12 122 94 10 6 6 6 62 62 62
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 158 158 158 18 18 18
- 14 14 13 2 2 6 2 2 6 2 2 6
- 6 6 6 18 18 18 66 66 66 38 38 38
- 6 6 6 94 94 93 50 50 50 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 10 10 10 10 10 10 18 18 18 38 38 38
- 78 78 78 142 134 106 219 158 11 241 186 13
-246 190 14 246 190 14 158 118 10 10 10 10
- 89 90 90 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 230 190
-238 206 90 238 206 90 188 140 34 38 26 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 38 38 38 46 46 46
- 26 26 26 106 106 105 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 22 22 22
- 30 30 30 38 38 38 50 50 50 70 70 70
-106 106 105 188 140 34 226 170 10 241 186 13
-246 190 14 246 190 14 246 190 14 154 114 10
- 6 6 6 74 74 74 226 226 226 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 233 188 64
-240 198 14 244 212 20 234 196 18 38 30 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 30 30 30 26 26 26
-202 164 20 154 142 90 66 66 66 26 26 26
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 38 38 38 58 58 58
- 78 78 78 86 86 86 102 102 102 122 122 122
-178 147 70 211 150 11 234 174 12 246 186 14
-246 190 14 246 190 14 246 190 14 238 190 10
-104 78 10 2 2 6 46 46 46 198 198 196
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 222 175 59
-241 186 13 240 198 14 210 162 12 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 122 94 10
-238 202 21 234 196 18 82 82 82 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 38 38 38 70 70 70 154 122 54
-188 140 34 204 146 11 197 139 12 197 139 12
-214 154 10 226 170 10 241 186 13 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-229 174 11 49 35 6 2 2 6 22 22 22
-158 158 158 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 242 242 242 222 175 59
-238 182 14 241 186 13 214 154 10 49 35 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 60 40 9 229 174 11
-238 190 10 241 186 13 114 102 78 42 42 43
- 14 14 13 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 154 122 54 214 154 10
-226 170 10 229 174 11 226 170 10 226 170 10
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-240 198 14 186 146 17 10 10 10 2 2 6
- 6 6 6 118 118 118 242 242 242 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 198 198 196 206 170 74
-238 178 14 238 178 14 211 150 11 138 94 6
- 18 14 6 2 2 6 2 2 6 2 2 6
- 6 6 6 70 46 6 204 146 11 238 178 14
-238 182 14 238 182 14 126 114 90 58 58 58
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 70 70 70 182 134 38 226 170 10
-238 182 14 241 186 13 241 186 13 246 186 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 234 196 18 98 70 6 2 2 6
- 2 2 6 2 2 6 66 66 66 223 222 222
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 206 206 206 198 198 196 207 165 68
-229 174 11 229 174 11 219 158 11 195 134 10
-163 110 10 118 82 10 104 78 10 118 82 10
-164 114 8 197 139 12 226 170 10 238 182 14
-241 186 13 241 186 13 162 146 94 78 78 78
- 34 34 34 14 14 13 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 188 140 34 226 170 10
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 240 198 14 202 164 20 18 18 18
- 2 2 6 2 2 6 2 2 6 38 38 38
-218 218 218 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 206 206 206 198 198 196 207 165 68
-226 170 10 238 178 14 226 166 13 211 150 11
-204 146 11 197 139 12 195 134 10 197 139 12
-211 150 11 226 170 10 241 186 13 246 190 14
-246 190 14 246 186 14 229 174 11 126 114 90
- 62 62 62 30 30 30 14 14 13 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 174 134 50 226 166 13
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 138 102 14
- 2 2 6 2 2 6 2 2 6 2 2 6
- 78 78 78 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 214 214 214 198 198 196 192 148 44
-220 162 10 238 178 14 234 174 12 226 166 13
-219 158 11 214 154 10 214 154 10 219 158 11
-226 170 10 238 182 14 246 190 14 246 190 14
-246 190 14 246 190 14 241 186 13 206 160 36
-102 102 102 58 58 58 30 30 30 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 86 86 86 150 150 150
-170 170 170 186 186 186 226 210 207 231 220 218
-246 230 190 246 230 190 246 230 190 246 230 190
-238 206 90 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 224 188 14
- 60 40 9 2 2 6 6 6 6 2 2 6
- 22 22 22 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 226 226 226 186 186 186 182 134 38
-219 158 11 238 178 14 238 182 14 238 178 14
-229 174 11 226 170 10 226 170 10 229 174 11
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 240 198 14 246 230 190 246 230 190
-226 210 207 186 186 186 110 110 110 38 38 38
- 26 26 26 122 122 122 138 138 142 138 138 142
-138 138 142 102 98 90 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 154 154 154 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-246 230 190 238 206 90 240 198 14 240 198 14
-240 198 14 240 198 14 246 190 14 246 190 14
-246 190 14 240 198 14 240 198 14 238 202 21
-206 160 36 18 18 18 22 22 22 30 30 30
- 70 70 70 246 246 246 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 118 118 118 170 126 38
-220 162 10 238 178 14 241 186 13 246 190 14
-234 196 18 246 190 14 246 190 14 234 196 18
-246 190 14 246 206 46 238 206 90 246 206 46
-240 198 14 246 230 190 254 254 254 254 254 254
-254 254 254 252 251 251 205 195 190 110 110 110
-134 134 134 242 242 242 250 250 250 254 254 254
-250 250 250 138 138 142 102 98 90 2 2 2
- 2 2 2 2 2 2 3 3 3 18 14 6
-150 150 150 242 242 242 239 159 153 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-239 159 153 246 218 74 246 246 246 246 246 246
-246 246 246 246 246 246 238 206 90 246 190 14
-246 230 190 246 246 246 246 246 246 246 246 246
-246 230 190 138 102 14 182 182 182 242 242 242
-252 251 251 252 251 251 252 251 251 252 251 251
-252 251 251 252 251 251 254 254 254 252 251 251
-252 251 251 252 251 251 246 246 246 252 251 251
-254 254 254 252 251 251 252 251 251 254 254 254
-254 254 254 252 251 251 242 242 242 238 238 238
-238 206 90 238 178 14 241 186 13 246 230 190
-246 246 246 246 246 246 246 246 246 246 230 190
-246 230 190 246 246 246 252 251 251 246 230 190
-246 230 190 246 230 190 249 100 93 249 100 93
-249 100 93 249 100 93 218 194 134 218 194 134
-234 234 234 212 132 53 249 100 93 249 100 93
-249 100 93 239 159 153 138 138 142 102 98 90
- 2 2 2 2 2 2 10 10 10 150 150 150
-242 242 242 249 100 93 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 246 246 246 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 238 238 238 246 230 190
-246 230 190 246 230 190 246 230 190 246 246 246
-231 220 218 218 194 134 218 194 134 226 210 207
-246 246 246 246 246 246 246 246 246 252 251 251
-246 246 246 226 210 207 218 194 134 218 194 134
-239 159 153 218 194 134 226 210 207 246 230 190
-246 246 246 238 206 90 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 246 246 226 210 207 239 159 153 226 210 207
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 218 194 134 246 246 246
-231 220 218 254 21 21 254 3 3 254 3 3
-254 3 3 212 132 53 250 250 250 122 122 122
- 2 2 2 2 2 2 89 90 90 246 246 246
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-226 210 207 226 210 207 254 21 21 254 21 21
-254 21 21 254 21 21 239 159 153 252 251 251
-249 100 93 254 21 21 254 21 21 254 21 21
-249 100 93 246 246 246 249 100 93 254 21 21
-254 21 21 254 21 21 249 100 93 249 100 93
-254 21 21 254 3 3 254 3 3 254 21 21
-212 132 53 246 246 246 252 251 251 226 210 207
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-249 100 93 242 242 242 246 246 246 249 100 93
-254 21 21 254 21 21 254 21 21 249 100 93
-249 100 93 254 3 3 254 3 3 254 56 56
-246 246 246 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 246 230 190 252 251 251
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 218 194 134 246 246 246 58 58 58
- 2 2 2 6 6 6 182 182 182 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 212 132 53 249 100 93 249 100 93
-246 246 246 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 238 238 238 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 246 230 190 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 246 246 246 231 220 218 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 254 56 56
-254 3 3 254 3 3 254 3 3 212 132 53
-246 246 246 254 21 21 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 242 242 242 214 214 214 14 14 13
- 2 2 2 6 6 6 210 210 210 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 239 159 153 238 238 238 246 246 246
-246 246 246 254 56 56 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 246 246 246 249 100 93 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-242 242 242 239 159 153 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-226 210 207 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-249 100 93 254 254 254 158 158 158 2 2 2
- 2 2 2 10 10 10 186 186 186 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 252 251 251
-246 230 190 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 56 56
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 226 210 207
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 231 220 218 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 56 56
-254 56 56 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 249 100 93 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 252 251 251 89 90 90 2 2 2
- 2 2 2 6 6 6 50 50 50 206 206 206
-226 210 207 249 100 93 254 56 56 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 238 238 238
-239 159 153 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 238 238 238 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-238 238 238 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 246 246 246 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-249 100 93 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 254 56 56 254 3 3
-254 3 3 254 3 3 254 21 21 249 100 93
-239 159 153 239 159 153 239 159 153 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 242 242 242 26 26 26 2 2 2
- 6 6 6 50 50 50 206 206 206 226 210 207
-231 220 218 231 220 218 231 220 218 246 230 190
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 231 220 218 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-218 194 134 254 3 3 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 231 220 218
-231 220 218 231 220 218 226 210 207 218 194 134
-226 210 207 231 220 218 254 3 3 254 3 3
-254 3 3 254 3 3 212 132 53 246 246 246
-252 251 251 252 251 251 242 242 242 231 220 218
-254 21 21 254 3 3 254 3 3 254 3 3
-249 100 93 242 242 242 238 238 238 254 56 56
-254 3 3 254 3 3 254 3 3 254 56 56
-246 246 246 194 194 194 6 6 6 2 2 2
- 22 22 22 210 210 210 246 230 190 254 56 56
-254 21 21 254 21 21 254 21 21 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 249 100 93 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 56 56 242 242 242
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 56 56
-238 238 238 212 132 53 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 249 100 93
-249 100 93 249 100 93 254 56 56 254 56 56
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 21 21 231 220 218 246 246 246
-206 170 74 182 158 106 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-218 194 134 242 242 242 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-252 251 251 131 126 116 6 6 6 2 2 2
- 89 90 90 246 246 246 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 226 210 207 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 56 56 226 210 207 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-238 238 238 226 210 207 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 239 159 153
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 56 56 246 246 246 231 220 218
-138 102 14 198 198 196 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 21 21
-246 230 190 252 251 251 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-242 242 242 62 62 62 6 6 6 2 2 2
- 58 58 58 122 122 122 218 194 134 212 132 53
-249 100 93 249 100 93 254 56 56 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-212 132 53 246 230 190 214 214 214 146 146 146
-242 242 242 239 159 153 249 100 93 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-239 159 153 246 230 190 246 246 246 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 218 194 134 249 100 93 254 56 56
-254 56 56 249 100 93 226 210 207 230 230 228
- 89 90 90 231 220 218 226 210 207 249 100 93
-249 100 93 254 56 56 254 56 56 254 56 56
-249 100 93 249 100 93 239 159 153 238 238 238
-218 194 134 239 159 153 212 132 53 249 100 93
-249 100 93 239 159 153 231 220 218 154 142 90
-102 102 102 146 146 146 170 170 170 239 159 153
-249 100 93 249 100 93 249 100 93 239 159 153
-218 218 218 130 130 130 239 159 153 249 100 93
-249 100 93 249 100 93 212 132 53 246 230 190
-118 118 118 18 14 6 6 6 6 2 2 2
- 2 2 2 58 58 58 118 118 118 242 242 242
-254 254 254 250 250 250 246 246 246 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 214 214 214 50 50 50 18 18 18
-138 138 142 246 246 246 252 251 251 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 231 220 218 252 251 251 239 159 153
-254 3 3 254 3 3 254 3 3 254 21 21
-231 220 218 238 238 238 252 251 251 242 242 242
-252 251 251 252 251 251 230 230 228 74 74 74
- 18 18 18 62 62 62 226 226 226 254 254 254
-252 251 251 246 246 246 246 246 246 252 251 251
-252 251 251 252 251 251 250 250 250 150 150 150
-162 146 94 205 195 190 252 251 251 252 251 251
-252 251 251 226 210 207 142 134 106 86 86 86
- 58 58 58 34 34 34 122 122 122 163 163 163
-252 251 251 254 254 254 250 250 250 223 222 222
-102 98 90 78 78 78 130 130 130 254 254 254
-254 254 254 254 254 254 246 246 246 118 118 118
- 18 14 6 3 3 3 2 2 2 2 2 2
- 2 2 2 2 2 2 58 58 58 122 122 122
-150 150 150 170 170 170 182 182 182 190 190 187
-201 202 203 201 202 203 190 190 187 170 170 170
-118 118 118 30 30 30 6 6 6 6 6 6
- 10 10 10 86 86 86 150 150 150 182 182 182
-201 202 203 201 202 203 190 190 187 174 174 174
-134 134 134 146 146 146 190 190 187 239 159 153
-249 100 93 249 100 93 249 100 93 249 100 93
-234 234 234 138 138 142 166 166 166 198 198 196
-190 190 187 138 138 142 42 42 43 6 6 6
- 3 3 3 6 6 6 50 50 50 138 138 142
-174 174 174 198 198 196 198 198 196 182 182 182
-163 163 163 138 138 142 102 98 90 70 70 70
- 94 86 75 158 158 158 178 166 146 170 170 170
-174 174 174 138 138 142 74 74 74 50 50 50
- 26 26 26 14 14 13 10 10 10 118 118 118
-130 130 130 130 130 130 130 130 130 102 98 90
- 6 6 6 3 3 3 78 78 78 130 130 130
-130 130 130 130 130 130 118 118 118 18 14 6
- 3 3 3 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 6 6 6
- 10 10 10 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 6 6 6
- 14 14 13 14 14 13 22 22 22 22 22 22
- 34 34 34 42 42 43 122 122 122 174 174 174
-254 254 254 254 254 254 254 254 254 238 238 238
-138 138 142 6 6 6 6 6 6 10 10 10
- 6 6 6 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 2 2 2
- 6 6 6 10 10 10 10 10 10 6 6 6
- 2 2 2 6 6 6 14 14 13 30 30 30
- 42 42 43 54 54 54 62 62 62 62 62 62
- 54 54 54 42 42 43 30 30 30 18 18 18
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 2 2 2 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 10 10 10 10 10 10 14 14 13 106 106 105
-163 163 163 170 170 170 166 166 166 138 138 142
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 22 22 22 22 22 22 22 22 22
- 18 18 18 14 14 13 10 10 10 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
diff --git a/drivers/video/logo/logo_superh_vga16.ppm b/drivers/video/logo/logo_superh_vga16.ppm
deleted file mode 100644
index a8ffcd72951b53..00000000000000
--- a/drivers/video/logo/logo_superh_vga16.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 16-color SuperH Linux logo
-80 80
-255
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 170 170 170 0 0 0 85 85 85
-170 170 170 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 170 170 170
- 85 85 85 85 85 85 85 85 85 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 170 170 170 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 255 170 170 170
-255 255 85 170 170 170 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 170 170 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 170 170 255 255 85
-170 85 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 85 85 85
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 85 0 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-255 255 85 255 255 255 255 255 255 255 255 255
-255 255 85 255 255 255 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 170 0 0 255 85 85
-170 0 0 255 85 85 170 170 170 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 170 170 170
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 85 85 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 85 85 85
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 170 170
-170 170 170 255 85 85 255 85 85 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 170 0 0
-170 0 0 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 255
-170 170 170 255 85 85 255 85 85 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 255 255 255
-255 85 85 170 170 170 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 85 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 85 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 255 255 255 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
- 85 85 85 170 170 170 255 255 255 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
-170 170 170 255 85 85 170 170 170 255 85 85
-255 85 85 170 170 170 255 255 85 170 170 170
- 0 0 0 85 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 255 85 85 255 85 85
-255 255 255 255 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 85 0 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 85 85 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 85 85 85 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 255 255 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 170 85 0 0 0 0
- 0 0 0 85 85 85 85 85 85 170 170 170
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 93539aac0e5b2e..acfa591b604611 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on ARM || ((M68K || SUPERH || XTENSA) && !MMU)
+ depends on ARM || ((M68K || XTENSA) && !MMU)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index de2003974ff0d0..8bf3547f9aa2e2 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -19,7 +19,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 6c6859bfc454cf..c977e87caf67a0 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -64,7 +64,6 @@ enum cpuhp_state {
CPUHP_PERF_X86_PREPARE,
CPUHP_PERF_X86_AMD_UNCORE_PREP,
CPUHP_PERF_POWER,
- CPUHP_PERF_SUPERH,
CPUHP_X86_HPET_DEAD,
CPUHP_X86_APB_DEAD,
CPUHP_X86_MCE_DEAD,
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index c255273b02810e..f0fe4cf51b7e56 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -4,11 +4,7 @@
#include <linux/ioport.h>
-#ifdef CONFIG_SUPERH
-#define INTC_NR_IRQS 512
-#else
#define INTC_NR_IRQS 1024
-#endif
/*
* Convert back and forth between INTEVT and IRQ values.
diff --git a/init/Kconfig b/init/Kconfig
index 0958846b005e15..a5566d69cc9c94 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1535,7 +1535,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE
help
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 137d4abe3eda11..e1ce74fb991b25 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2362,8 +2362,7 @@ static struct ctl_table vm_table[] = {
.proc_handler = numa_zonelist_order_handler,
},
#endif
-#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
- (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
+#if defined(CONFIG_X86_32) && !defined(CONFIG_UML)
{
.procname = "vdso_enabled",
#ifdef CONFIG_X86_32
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 881c3f84e88a32..c51d1f181913f3 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -514,7 +514,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
diff --git a/lib/math/div64.c b/lib/math/div64.c
index 55a81782e2717f..7c51cd1fc9d527 100644
--- a/lib/math/div64.c
+++ b/lib/math/div64.c
@@ -14,8 +14,8 @@
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S
- * or by defining a preprocessor macro in arch/include/asm/div64.h.
+ * assembly versions such as arch/ppc/lib/div64.S or by defining a preprocessor
+ * macro in arch/include/asm/div64.h.
*/
#include <linux/bitops.h>
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index 5ff04d8fe97163..b762c629b59545 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -26,8 +26,7 @@
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
- !defined(CONFIG_PPC32) && \
- !defined(CONFIG_SUPERH))
+ !defined(CONFIG_PPC32))
# define TEST_U64
#endif
diff --git a/scripts/coccinelle/misc/cond_no_effect.cocci b/scripts/coccinelle/misc/cond_no_effect.cocci
index 91d16a81d1da94..05564c2b86b0f3 100644
--- a/scripts/coccinelle/misc/cond_no_effect.cocci
+++ b/scripts/coccinelle/misc/cond_no_effect.cocci
@@ -14,18 +14,7 @@
// In the Linux kernel it does not seem to actually report
// false positives except for those that were documented as
// being intentional.
-// the two known cases are:
-// arch/sh/kernel/traps_64.c:read_opcode()
-// } else if ((pc & 1) == 0) {
-// /* SHcompact */
-// /* TODO : provide handling for this. We don't really support
-// user-mode SHcompact yet, and for a kernel fault, this would
-// have to come from a module built for SHcompact. */
-// return -EFAULT;
-// } else {
-// /* misaligned */
-// return -EFAULT;
-// }
+// the one known case is:
// fs/kernfs/file.c:kernfs_fop_open()
// * Both paths of the branch look the same. They're supposed to
// * look that way and give @of->mutex different static lockdep keys.
diff --git a/scripts/head-object-list.txt b/scripts/head-object-list.txt
index b074134cfac210..4b844a1e3be88e 100644
--- a/scripts/head-object-list.txt
+++ b/scripts/head-object-list.txt
@@ -39,7 +39,6 @@ arch/powerpc/kernel/fpu.o
arch/powerpc/kernel/vector.o
arch/powerpc/kernel/prom_init.o
arch/s390/kernel/head64.o
-arch/sh/kernel/head_32.o
arch/sparc/kernel/head_32.o
arch/sparc/kernel/head_64.o
arch/x86/kernel/head_32.o
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 7bddfd5e38d6cf..793a0326f32b46 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
menu "SoC Audio support for Renesas SoCs"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
config SND_SOC_PCM_SH7760
tristate "SoC Audio support for Renesas SH7760"
@@ -23,7 +23,7 @@ config SND_SOC_SH4_SSI
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
- depends on SUPERH || COMMON_CLK
+ depends on COMMON_CLK
select SND_SIMPLE_CARD
help
This option enables FSI sound support
diff --git a/tools/include/asm/barrier.h b/tools/include/asm/barrier.h
index 8d378c57cb0114..ca1979459a127f 100644
--- a/tools/include/asm/barrier.h
+++ b/tools/include/asm/barrier.h
@@ -10,8 +10,6 @@
#include "../../arch/powerpc/include/asm/barrier.h"
#elif defined(__s390__)
#include "../../arch/s390/include/asm/barrier.h"
-#elif defined(__sh__)
-#include "../../arch/sh/include/asm/barrier.h"
#elif defined(__sparc__)
#include "../../arch/sparc/include/asm/barrier.h"
#elif defined(__tile__)
diff --git a/tools/perf/util/dwarf-regs.c b/tools/perf/util/dwarf-regs.c
index 3fa4486742cdfe..54fdbfb22ec274 100644
--- a/tools/perf/util/dwarf-regs.c
+++ b/tools/perf/util/dwarf-regs.c
@@ -19,7 +19,6 @@
#include "../arch/x86/include/dwarf-regs-table.h"
#include "../arch/arm/include/dwarf-regs-table.h"
#include "../arch/arm64/include/dwarf-regs-table.h"
-#include "../arch/sh/include/dwarf-regs-table.h"
#include "../arch/powerpc/include/dwarf-regs-table.h"
#include "../arch/s390/include/dwarf-regs-table.h"
#include "../arch/sparc/include/dwarf-regs-table.h"
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 03/22] remove arch/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
The Linux SH port has been mostly abandoned for years, with the last
minor maintainer updated being in November 2021. Drop it as it drags
maintainance of the rest of the kernel down.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
Documentation/arch.rst | 1 -
Documentation/sh/booting.rst | 12 -
Documentation/sh/features.rst | 3 -
Documentation/sh/index.rst | 56 -
Documentation/sh/new-machine.rst | 277 ---
Documentation/sh/register-banks.rst | 40 -
MAINTAINERS | 10 -
arch/sh/Kbuild | 7 -
arch/sh/Kconfig | 793 --------
arch/sh/Kconfig.cpu | 100 -
arch/sh/Kconfig.debug | 78 -
arch/sh/Makefile | 215 ---
arch/sh/boards/Kconfig | 400 ----
arch/sh/boards/Makefile | 20 -
arch/sh/boards/board-apsh4a3a.c | 182 --
arch/sh/boards/board-apsh4ad0a.c | 132 --
arch/sh/boards/board-edosk7705.c | 79 -
arch/sh/boards/board-edosk7760.c | 178 --
arch/sh/boards/board-espt.c | 105 --
arch/sh/boards/board-magicpanelr2.c | 390 ----
arch/sh/boards/board-polaris.c | 156 --
arch/sh/boards/board-secureedge5410.c | 75 -
arch/sh/boards/board-sh2007.c | 146 --
arch/sh/boards/board-sh7757lcr.c | 604 -------
arch/sh/boards/board-sh7785lcr.c | 384 ----
arch/sh/boards/board-shmin.c | 35 -
arch/sh/boards/board-titan.c | 21 -
arch/sh/boards/board-urquell.c | 218 ---
arch/sh/boards/mach-ap325rxa/Makefile | 3 -
arch/sh/boards/mach-ap325rxa/sdram.S | 66 -
arch/sh/boards/mach-ap325rxa/setup.c | 573 ------
arch/sh/boards/mach-dreamcast/Makefile | 7 -
arch/sh/boards/mach-dreamcast/irq.c | 155 --
arch/sh/boards/mach-dreamcast/rtc.c | 96 -
arch/sh/boards/mach-dreamcast/setup.c | 39 -
arch/sh/boards/mach-ecovec24/Makefile | 10 -
arch/sh/boards/mach-ecovec24/sdram.S | 108 --
arch/sh/boards/mach-ecovec24/setup.c | 1521 ----------------
arch/sh/boards/mach-highlander/Kconfig | 26 -
arch/sh/boards/mach-highlander/Makefile | 12 -
arch/sh/boards/mach-highlander/irq-r7780mp.c | 71 -
arch/sh/boards/mach-highlander/irq-r7780rp.c | 64 -
arch/sh/boards/mach-highlander/irq-r7785rp.c | 83 -
.../boards/mach-highlander/pinmux-r7785rp.c | 17 -
arch/sh/boards/mach-highlander/psw.c | 119 --
arch/sh/boards/mach-highlander/setup.c | 416 -----
arch/sh/boards/mach-hp6xx/Makefile | 8 -
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 109 --
arch/sh/boards/mach-hp6xx/pm.c | 156 --
arch/sh/boards/mach-hp6xx/pm_wakeup.S | 39 -
arch/sh/boards/mach-hp6xx/setup.c | 172 --
arch/sh/boards/mach-kfr2r09/Makefile | 5 -
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 275 ---
arch/sh/boards/mach-kfr2r09/sdram.S | 77 -
arch/sh/boards/mach-kfr2r09/setup.c | 649 -------
arch/sh/boards/mach-landisk/Makefile | 6 -
arch/sh/boards/mach-landisk/gio.c | 164 --
arch/sh/boards/mach-landisk/irq.c | 63 -
arch/sh/boards/mach-landisk/psw.c | 140 --
arch/sh/boards/mach-landisk/setup.c | 102 --
arch/sh/boards/mach-lboxre2/Makefile | 6 -
arch/sh/boards/mach-lboxre2/irq.c | 27 -
arch/sh/boards/mach-lboxre2/setup.c | 79 -
arch/sh/boards/mach-microdev/Makefile | 6 -
arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157 --
arch/sh/boards/mach-microdev/io.c | 123 --
arch/sh/boards/mach-microdev/irq.c | 150 --
arch/sh/boards/mach-microdev/setup.c | 197 --
arch/sh/boards/mach-migor/Kconfig | 16 -
arch/sh/boards/mach-migor/Makefile | 3 -
arch/sh/boards/mach-migor/lcd_qvga.c | 163 --
arch/sh/boards/mach-migor/sdram.S | 66 -
arch/sh/boards/mach-migor/setup.c | 649 -------
arch/sh/boards/mach-r2d/Kconfig | 24 -
arch/sh/boards/mach-r2d/Makefile | 6 -
arch/sh/boards/mach-r2d/irq.c | 156 --
arch/sh/boards/mach-r2d/setup.c | 305 ----
arch/sh/boards/mach-rsk/Kconfig | 29 -
arch/sh/boards/mach-rsk/Makefile | 5 -
arch/sh/boards/mach-rsk/devices-rsk7203.c | 137 --
arch/sh/boards/mach-rsk/devices-rsk7264.c | 55 -
arch/sh/boards/mach-rsk/devices-rsk7269.c | 57 -
arch/sh/boards/mach-rsk/setup.c | 84 -
arch/sh/boards/mach-sdk7780/Kconfig | 17 -
arch/sh/boards/mach-sdk7780/Makefile | 6 -
arch/sh/boards/mach-sdk7780/irq.c | 43 -
arch/sh/boards/mach-sdk7780/setup.c | 96 -
arch/sh/boards/mach-sdk7786/Makefile | 5 -
arch/sh/boards/mach-sdk7786/fpga.c | 69 -
arch/sh/boards/mach-sdk7786/gpio.c | 46 -
arch/sh/boards/mach-sdk7786/irq.c | 45 -
arch/sh/boards/mach-sdk7786/nmi.c | 80 -
arch/sh/boards/mach-sdk7786/setup.c | 266 ---
arch/sh/boards/mach-sdk7786/sram.c | 69 -
arch/sh/boards/mach-se/7206/Makefile | 6 -
arch/sh/boards/mach-se/7206/irq.c | 151 --
arch/sh/boards/mach-se/7206/setup.c | 96 -
arch/sh/boards/mach-se/7343/Makefile | 6 -
arch/sh/boards/mach-se/7343/irq.c | 123 --
arch/sh/boards/mach-se/7343/setup.c | 182 --
arch/sh/boards/mach-se/770x/Makefile | 6 -
arch/sh/boards/mach-se/770x/irq.c | 109 --
arch/sh/boards/mach-se/770x/setup.c | 205 ---
arch/sh/boards/mach-se/7721/Makefile | 2 -
arch/sh/boards/mach-se/7721/irq.c | 42 -
arch/sh/boards/mach-se/7721/setup.c | 92 -
arch/sh/boards/mach-se/7722/Makefile | 11 -
arch/sh/boards/mach-se/7722/irq.c | 116 --
arch/sh/boards/mach-se/7722/setup.c | 190 --
arch/sh/boards/mach-se/7724/Makefile | 11 -
arch/sh/boards/mach-se/7724/irq.c | 143 --
arch/sh/boards/mach-se/7724/sdram.S | 128 --
arch/sh/boards/mach-se/7724/setup.c | 986 ----------
arch/sh/boards/mach-se/7751/Makefile | 6 -
arch/sh/boards/mach-se/7751/irq.c | 51 -
arch/sh/boards/mach-se/7751/setup.c | 60 -
arch/sh/boards/mach-se/7780/Makefile | 11 -
arch/sh/boards/mach-se/7780/irq.c | 65 -
arch/sh/boards/mach-se/7780/setup.c | 111 --
arch/sh/boards/mach-se/Makefile | 11 -
arch/sh/boards/mach-se/board-se7619.c | 27 -
arch/sh/boards/mach-sh03/Makefile | 7 -
arch/sh/boards/mach-sh03/rtc.c | 143 --
arch/sh/boards/mach-sh03/setup.c | 97 -
arch/sh/boards/mach-sh7763rdp/Makefile | 2 -
arch/sh/boards/mach-sh7763rdp/irq.c | 42 -
arch/sh/boards/mach-sh7763rdp/setup.c | 213 ---
arch/sh/boards/mach-x3proto/Makefile | 4 -
arch/sh/boards/mach-x3proto/gpio.c | 136 --
arch/sh/boards/mach-x3proto/ilsel.c | 156 --
arch/sh/boards/mach-x3proto/setup.c | 270 ---
arch/sh/boards/of-generic.c | 172 --
arch/sh/boot/.gitignore | 5 -
arch/sh/boot/Makefile | 115 --
arch/sh/boot/compressed/.gitignore | 2 -
arch/sh/boot/compressed/Makefile | 66 -
arch/sh/boot/compressed/ashiftrt.S | 2 -
arch/sh/boot/compressed/ashldi3.c | 2 -
arch/sh/boot/compressed/ashlsi3.S | 2 -
arch/sh/boot/compressed/ashrsi3.S | 2 -
arch/sh/boot/compressed/cache.c | 13 -
arch/sh/boot/compressed/head_32.S | 126 --
arch/sh/boot/compressed/head_64.S | 159 --
arch/sh/boot/compressed/lshrsi3.S | 2 -
arch/sh/boot/compressed/misc.c | 146 --
arch/sh/boot/compressed/vmlinux.scr | 10 -
arch/sh/boot/dts/Makefile | 2 -
arch/sh/boot/dts/j2_mimas_v2.dts | 99 -
arch/sh/boot/romimage/Makefile | 30 -
arch/sh/boot/romimage/head.S | 85 -
arch/sh/boot/romimage/mmcif-sh7724.c | 78 -
arch/sh/boot/romimage/vmlinux.scr | 8 -
arch/sh/cchips/Kconfig | 46 -
arch/sh/cchips/hd6446x/Makefile | 4 -
arch/sh/cchips/hd6446x/hd64461.c | 112 --
arch/sh/configs/ap325rxa_defconfig | 103 --
arch/sh/configs/apsh4a3a_defconfig | 91 -
arch/sh/configs/apsh4ad0a_defconfig | 122 --
arch/sh/configs/dreamcast_defconfig | 72 -
arch/sh/configs/ecovec24-romimage_defconfig | 58 -
arch/sh/configs/ecovec24_defconfig | 132 --
arch/sh/configs/edosk7705_defconfig | 35 -
arch/sh/configs/edosk7760_defconfig | 114 --
arch/sh/configs/espt_defconfig | 114 --
arch/sh/configs/hp6xx_defconfig | 60 -
arch/sh/configs/j2_defconfig | 42 -
arch/sh/configs/kfr2r09-romimage_defconfig | 53 -
arch/sh/configs/kfr2r09_defconfig | 84 -
arch/sh/configs/landisk_defconfig | 115 --
arch/sh/configs/lboxre2_defconfig | 62 -
arch/sh/configs/magicpanelr2_defconfig | 90 -
arch/sh/configs/microdev_defconfig | 43 -
arch/sh/configs/migor_defconfig | 94 -
arch/sh/configs/polaris_defconfig | 83 -
arch/sh/configs/r7780mp_defconfig | 109 --
arch/sh/configs/r7785rp_defconfig | 107 --
arch/sh/configs/rsk7201_defconfig | 63 -
arch/sh/configs/rsk7203_defconfig | 121 --
arch/sh/configs/rsk7264_defconfig | 71 -
arch/sh/configs/rsk7269_defconfig | 56 -
arch/sh/configs/rts7751r2d1_defconfig | 91 -
arch/sh/configs/rts7751r2dplus_defconfig | 96 -
arch/sh/configs/sdk7780_defconfig | 139 --
arch/sh/configs/sdk7786_defconfig | 217 ---
arch/sh/configs/se7206_defconfig | 108 --
arch/sh/configs/se7343_defconfig | 96 -
arch/sh/configs/se7619_defconfig | 43 -
arch/sh/configs/se7705_defconfig | 54 -
arch/sh/configs/se7712_defconfig | 101 --
arch/sh/configs/se7721_defconfig | 127 --
arch/sh/configs/se7722_defconfig | 56 -
arch/sh/configs/se7724_defconfig | 132 --
arch/sh/configs/se7750_defconfig | 55 -
arch/sh/configs/se7751_defconfig | 46 -
arch/sh/configs/se7780_defconfig | 106 --
arch/sh/configs/secureedge5410_defconfig | 53 -
arch/sh/configs/sh03_defconfig | 126 --
arch/sh/configs/sh2007_defconfig | 199 --
arch/sh/configs/sh7710voipgw_defconfig | 55 -
arch/sh/configs/sh7724_generic_defconfig | 41 -
arch/sh/configs/sh7757lcr_defconfig | 85 -
arch/sh/configs/sh7763rdp_defconfig | 116 --
arch/sh/configs/sh7770_generic_defconfig | 43 -
arch/sh/configs/sh7785lcr_32bit_defconfig | 149 --
arch/sh/configs/sh7785lcr_defconfig | 117 --
arch/sh/configs/shmin_defconfig | 52 -
arch/sh/configs/shx3_defconfig | 103 --
arch/sh/configs/titan_defconfig | 272 ---
arch/sh/configs/ul2_defconfig | 84 -
arch/sh/configs/urquell_defconfig | 147 --
arch/sh/drivers/Kconfig | 20 -
arch/sh/drivers/Makefile | 11 -
arch/sh/drivers/dma/Kconfig | 74 -
arch/sh/drivers/dma/Makefile | 9 -
arch/sh/drivers/dma/dma-api.c | 417 -----
arch/sh/drivers/dma/dma-g2.c | 197 --
arch/sh/drivers/dma/dma-pvr2.c | 102 --
arch/sh/drivers/dma/dma-sh.c | 414 -----
arch/sh/drivers/dma/dma-sysfs.c | 164 --
arch/sh/drivers/dma/dmabrg.c | 196 --
arch/sh/drivers/heartbeat.c | 152 --
arch/sh/drivers/pci/Makefile | 27 -
arch/sh/drivers/pci/common.c | 159 --
arch/sh/drivers/pci/fixups-dreamcast.c | 84 -
arch/sh/drivers/pci/fixups-landisk.c | 57 -
arch/sh/drivers/pci/fixups-r7780rp.c | 18 -
arch/sh/drivers/pci/fixups-rts7751r2d.c | 64 -
arch/sh/drivers/pci/fixups-sdk7780.c | 40 -
arch/sh/drivers/pci/fixups-sdk7786.c | 64 -
arch/sh/drivers/pci/fixups-se7751.c | 113 --
arch/sh/drivers/pci/fixups-sh03.c | 33 -
arch/sh/drivers/pci/fixups-snapgear.c | 37 -
arch/sh/drivers/pci/fixups-titan.c | 36 -
arch/sh/drivers/pci/ops-dreamcast.c | 79 -
arch/sh/drivers/pci/ops-sh4.c | 105 --
arch/sh/drivers/pci/ops-sh7786.c | 168 --
arch/sh/drivers/pci/pci-dreamcast.c | 97 -
arch/sh/drivers/pci/pci-sh4.h | 182 --
arch/sh/drivers/pci/pci-sh7751.c | 179 --
arch/sh/drivers/pci/pci-sh7751.h | 126 --
arch/sh/drivers/pci/pci-sh7780.c | 407 -----
arch/sh/drivers/pci/pci-sh7780.h | 43 -
arch/sh/drivers/pci/pci.c | 298 ---
arch/sh/drivers/pci/pcie-sh7786.c | 609 -------
arch/sh/drivers/pci/pcie-sh7786.h | 577 ------
arch/sh/drivers/platform_early.c | 340 ----
arch/sh/drivers/push-switch.c | 136 --
arch/sh/drivers/superhyway/Makefile | 7 -
arch/sh/drivers/superhyway/ops-sh4-202.c | 168 --
arch/sh/include/asm/Kbuild | 5 -
arch/sh/include/asm/adc.h | 12 -
arch/sh/include/asm/addrspace.h | 63 -
arch/sh/include/asm/alignment.h | 22 -
arch/sh/include/asm/asm-offsets.h | 2 -
arch/sh/include/asm/atomic-grb.h | 86 -
arch/sh/include/asm/atomic-irq.h | 72 -
arch/sh/include/asm/atomic-llsc.h | 88 -
arch/sh/include/asm/atomic.h | 38 -
arch/sh/include/asm/barrier.h | 45 -
arch/sh/include/asm/bitops-cas.h | 94 -
arch/sh/include/asm/bitops-grb.h | 173 --
arch/sh/include/asm/bitops-llsc.h | 147 --
arch/sh/include/asm/bitops-op32.h | 143 --
arch/sh/include/asm/bitops.h | 72 -
arch/sh/include/asm/bl_bit.h | 2 -
arch/sh/include/asm/bl_bit_32.h | 34 -
arch/sh/include/asm/bug.h | 121 --
arch/sh/include/asm/bugs.h | 74 -
arch/sh/include/asm/cache.h | 46 -
arch/sh/include/asm/cache_insns.h | 2 -
arch/sh/include/asm/cache_insns_32.h | 22 -
arch/sh/include/asm/cacheflush.h | 106 --
arch/sh/include/asm/checksum.h | 2 -
arch/sh/include/asm/checksum_32.h | 203 ---
arch/sh/include/asm/clock.h | 17 -
arch/sh/include/asm/cmpxchg-cas.h | 25 -
arch/sh/include/asm/cmpxchg-grb.h | 95 -
arch/sh/include/asm/cmpxchg-irq.h | 54 -
arch/sh/include/asm/cmpxchg-llsc.h | 53 -
arch/sh/include/asm/cmpxchg-xchg.h | 50 -
arch/sh/include/asm/cmpxchg.h | 74 -
arch/sh/include/asm/device.h | 17 -
arch/sh/include/asm/dma-register.h | 50 -
arch/sh/include/asm/dma.h | 140 --
arch/sh/include/asm/dmabrg.h | 24 -
arch/sh/include/asm/dwarf.h | 417 -----
arch/sh/include/asm/elf.h | 211 ---
arch/sh/include/asm/entry-macros.S | 123 --
arch/sh/include/asm/extable.h | 7 -
arch/sh/include/asm/fb.h | 20 -
arch/sh/include/asm/fixmap.h | 86 -
arch/sh/include/asm/flat.h | 33 -
arch/sh/include/asm/fpu.h | 69 -
arch/sh/include/asm/freq.h | 12 -
arch/sh/include/asm/ftrace.h | 48 -
arch/sh/include/asm/futex-cas.h | 35 -
arch/sh/include/asm/futex-irq.h | 25 -
arch/sh/include/asm/futex-llsc.h | 42 -
arch/sh/include/asm/futex.h | 72 -
arch/sh/include/asm/gpio.h | 50 -
arch/sh/include/asm/hardirq.h | 11 -
arch/sh/include/asm/hd64461.h | 252 ---
arch/sh/include/asm/heartbeat.h | 19 -
arch/sh/include/asm/hugetlb.h | 38 -
arch/sh/include/asm/hw_breakpoint.h | 70 -
arch/sh/include/asm/hw_irq.h | 36 -
arch/sh/include/asm/i2c-sh7760.h | 21 -
arch/sh/include/asm/io.h | 294 ---
arch/sh/include/asm/io_generic.h | 19 -
arch/sh/include/asm/io_noioport.h | 86 -
arch/sh/include/asm/io_trapped.h | 59 -
arch/sh/include/asm/irq.h | 58 -
arch/sh/include/asm/irqflags.h | 10 -
arch/sh/include/asm/kdebug.h | 19 -
arch/sh/include/asm/kexec.h | 72 -
arch/sh/include/asm/kgdb.h | 38 -
arch/sh/include/asm/kprobes.h | 57 -
arch/sh/include/asm/linkage.h | 8 -
arch/sh/include/asm/machvec.h | 41 -
arch/sh/include/asm/mmiowb.h | 12 -
arch/sh/include/asm/mmu.h | 107 --
arch/sh/include/asm/mmu_context.h | 178 --
arch/sh/include/asm/mmu_context_32.h | 51 -
arch/sh/include/asm/mmzone.h | 45 -
arch/sh/include/asm/module.h | 14 -
arch/sh/include/asm/page.h | 186 --
arch/sh/include/asm/pci.h | 91 -
arch/sh/include/asm/perf_event.h | 30 -
arch/sh/include/asm/pgalloc.h | 40 -
arch/sh/include/asm/pgtable-2level.h | 24 -
arch/sh/include/asm/pgtable-3level.h | 59 -
arch/sh/include/asm/pgtable.h | 150 --
arch/sh/include/asm/pgtable_32.h | 462 -----
arch/sh/include/asm/platform_early.h | 61 -
arch/sh/include/asm/posix_types.h | 2 -
arch/sh/include/asm/processor.h | 173 --
arch/sh/include/asm/processor_32.h | 202 ---
arch/sh/include/asm/ptrace.h | 139 --
arch/sh/include/asm/ptrace_32.h | 14 -
arch/sh/include/asm/push-switch.h | 32 -
arch/sh/include/asm/reboot.h | 22 -
arch/sh/include/asm/romimage-macros.h | 74 -
arch/sh/include/asm/rtc.h | 15 -
arch/sh/include/asm/seccomp.h | 21 -
arch/sh/include/asm/sections.h | 12 -
arch/sh/include/asm/setup.h | 25 -
arch/sh/include/asm/sfp-machine.h | 80 -
arch/sh/include/asm/sh7760fb.h | 198 --
arch/sh/include/asm/sh_bios.h | 28 -
arch/sh/include/asm/shmparam.h | 19 -
arch/sh/include/asm/siu.h | 20 -
arch/sh/include/asm/smc37c93x.h | 191 --
arch/sh/include/asm/smp-ops.h | 52 -
arch/sh/include/asm/smp.h | 83 -
arch/sh/include/asm/sparsemem.h | 12 -
arch/sh/include/asm/spi.h | 14 -
arch/sh/include/asm/spinlock-cas.h | 89 -
arch/sh/include/asm/spinlock-llsc.h | 198 --
arch/sh/include/asm/spinlock.h | 19 -
arch/sh/include/asm/spinlock_types.h | 22 -
arch/sh/include/asm/sram.h | 39 -
arch/sh/include/asm/stackprotector.h | 21 -
arch/sh/include/asm/stacktrace.h | 21 -
arch/sh/include/asm/string.h | 2 -
arch/sh/include/asm/string_32.h | 102 --
arch/sh/include/asm/suspend.h | 97 -
arch/sh/include/asm/switch_to.h | 7 -
arch/sh/include/asm/switch_to_32.h | 131 --
arch/sh/include/asm/syscall.h | 9 -
arch/sh/include/asm/syscall_32.h | 69 -
arch/sh/include/asm/syscalls.h | 14 -
arch/sh/include/asm/syscalls_32.h | 27 -
arch/sh/include/asm/thread_info.h | 171 --
arch/sh/include/asm/timex.h | 24 -
arch/sh/include/asm/tlb.h | 29 -
arch/sh/include/asm/tlbflush.h | 52 -
arch/sh/include/asm/topology.h | 28 -
arch/sh/include/asm/traps.h | 18 -
arch/sh/include/asm/traps_32.h | 61 -
arch/sh/include/asm/types.h | 16 -
arch/sh/include/asm/uaccess.h | 133 --
arch/sh/include/asm/uaccess_32.h | 227 ---
arch/sh/include/asm/uncached.h | 59 -
arch/sh/include/asm/unistd.h | 31 -
arch/sh/include/asm/unwinder.h | 32 -
arch/sh/include/asm/user.h | 55 -
arch/sh/include/asm/vermagic.h | 30 -
arch/sh/include/asm/vga.h | 7 -
arch/sh/include/asm/vmalloc.h | 4 -
arch/sh/include/asm/vmlinux.lds.h | 18 -
arch/sh/include/asm/watchdog.h | 159 --
arch/sh/include/asm/word-at-a-time.h | 54 -
arch/sh/include/cpu-common/cpu/addrspace.h | 16 -
arch/sh/include/cpu-common/cpu/mmu_context.h | 13 -
arch/sh/include/cpu-common/cpu/pfc.h | 18 -
arch/sh/include/cpu-common/cpu/rtc.h | 9 -
arch/sh/include/cpu-common/cpu/sigcontext.h | 18 -
arch/sh/include/cpu-common/cpu/timer.h | 7 -
arch/sh/include/cpu-sh2/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2/cpu/freq.h | 15 -
arch/sh/include/cpu-sh2/cpu/watchdog.h | 66 -
arch/sh/include/cpu-sh2a/cpu/addrspace.h | 11 -
arch/sh/include/cpu-sh2a/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2a/cpu/freq.h | 13 -
arch/sh/include/cpu-sh2a/cpu/rtc.h | 9 -
arch/sh/include/cpu-sh2a/cpu/sh7203.h | 144 --
arch/sh/include/cpu-sh2a/cpu/sh7264.h | 169 --
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 213 ---
arch/sh/include/cpu-sh2a/cpu/watchdog.h | 2 -
arch/sh/include/cpu-sh3/cpu/adc.h | 29 -
arch/sh/include/cpu-sh3/cpu/cache.h | 40 -
arch/sh/include/cpu-sh3/cpu/dac.h | 42 -
arch/sh/include/cpu-sh3/cpu/dma-register.h | 38 -
arch/sh/include/cpu-sh3/cpu/dma.h | 19 -
arch/sh/include/cpu-sh3/cpu/freq.h | 24 -
arch/sh/include/cpu-sh3/cpu/gpio.h | 78 -
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 42 -
arch/sh/include/cpu-sh3/cpu/serial.h | 11 -
arch/sh/include/cpu-sh3/cpu/sh7720.h | 175 --
arch/sh/include/cpu-sh3/cpu/watchdog.h | 22 -
arch/sh/include/cpu-sh4/cpu/addrspace.h | 41 -
arch/sh/include/cpu-sh4/cpu/cache.h | 41 -
arch/sh/include/cpu-sh4/cpu/dma-register.h | 98 -
arch/sh/include/cpu-sh4/cpu/dma.h | 18 -
arch/sh/include/cpu-sh4/cpu/fpu.h | 30 -
arch/sh/include/cpu-sh4/cpu/freq.h | 74 -
arch/sh/include/cpu-sh4/cpu/mmu_context.h | 79 -
arch/sh/include/cpu-sh4/cpu/rtc.h | 14 -
arch/sh/include/cpu-sh4/cpu/sh7722.h | 252 ---
arch/sh/include/cpu-sh4/cpu/sh7723.h | 285 ---
arch/sh/include/cpu-sh4/cpu/sh7724.h | 319 ----
arch/sh/include/cpu-sh4/cpu/sh7734.h | 307 ----
arch/sh/include/cpu-sh4/cpu/sh7757.h | 290 ---
arch/sh/include/cpu-sh4/cpu/sh7785.h | 260 ---
arch/sh/include/cpu-sh4/cpu/sh7786.h | 138 --
arch/sh/include/cpu-sh4/cpu/shx3.h | 65 -
arch/sh/include/cpu-sh4/cpu/sigcontext.h | 25 -
arch/sh/include/cpu-sh4/cpu/sq.h | 33 -
arch/sh/include/cpu-sh4/cpu/watchdog.h | 41 -
arch/sh/include/cpu-sh4a/cpu/dma.h | 72 -
arch/sh/include/cpu-sh4a/cpu/serial.h | 8 -
arch/sh/include/mach-common/mach/highlander.h | 208 ---
arch/sh/include/mach-common/mach/hp6xx.h | 59 -
arch/sh/include/mach-common/mach/lboxre2.h | 24 -
.../include/mach-common/mach/magicpanelr2.h | 64 -
.../sh/include/mach-common/mach/mangle-port.h | 46 -
arch/sh/include/mach-common/mach/microdev.h | 69 -
arch/sh/include/mach-common/mach/r2d.h | 71 -
arch/sh/include/mach-common/mach/romimage.h | 12 -
arch/sh/include/mach-common/mach/sdk7780.h | 79 -
.../include/mach-common/mach/secureedge5410.h | 47 -
arch/sh/include/mach-common/mach/sh2007.h | 118 --
arch/sh/include/mach-common/mach/sh7763rdp.h | 50 -
arch/sh/include/mach-common/mach/sh7785lcr.h | 58 -
arch/sh/include/mach-common/mach/shmin.h | 10 -
arch/sh/include/mach-common/mach/titan.h | 20 -
arch/sh/include/mach-common/mach/urquell.h | 69 -
arch/sh/include/mach-dreamcast/mach/dma.h | 29 -
arch/sh/include/mach-dreamcast/mach/maple.h | 38 -
arch/sh/include/mach-dreamcast/mach/pci.h | 24 -
arch/sh/include/mach-dreamcast/mach/sysasic.h | 46 -
.../mach-ecovec24/mach/partner-jet-setup.txt | 82 -
arch/sh/include/mach-ecovec24/mach/romimage.h | 48 -
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 24 -
.../mach-kfr2r09/mach/partner-jet-setup.txt | 144 --
arch/sh/include/mach-kfr2r09/mach/romimage.h | 31 -
arch/sh/include/mach-landisk/mach/gio.h | 38 -
.../mach-landisk/mach/iodata_landisk.h | 46 -
arch/sh/include/mach-migor/mach/migor.h | 16 -
arch/sh/include/mach-sdk7786/mach/fpga.h | 156 --
arch/sh/include/mach-sdk7786/mach/irq.h | 8 -
arch/sh/include/mach-se/mach/mrshpc.h | 53 -
arch/sh/include/mach-se/mach/se.h | 120 --
arch/sh/include/mach-se/mach/se7206.h | 14 -
arch/sh/include/mach-se/mach/se7343.h | 143 --
arch/sh/include/mach-se/mach/se7721.h | 68 -
arch/sh/include/mach-se/mach/se7722.h | 98 -
arch/sh/include/mach-se/mach/se7724.h | 69 -
arch/sh/include/mach-se/mach/se7751.h | 75 -
arch/sh/include/mach-se/mach/se7780.h | 106 --
arch/sh/include/mach-sh03/mach/io.h | 26 -
arch/sh/include/mach-sh03/mach/sh03.h | 19 -
arch/sh/include/mach-x3proto/mach/hardware.h | 13 -
arch/sh/include/mach-x3proto/mach/ilsel.h | 46 -
arch/sh/include/uapi/asm/Kbuild | 4 -
arch/sh/include/uapi/asm/auxvec.h | 39 -
arch/sh/include/uapi/asm/byteorder.h | 11 -
arch/sh/include/uapi/asm/cachectl.h | 20 -
arch/sh/include/uapi/asm/cpu-features.h | 28 -
arch/sh/include/uapi/asm/hw_breakpoint.h | 5 -
arch/sh/include/uapi/asm/ioctls.h | 116 --
arch/sh/include/uapi/asm/posix_types.h | 2 -
arch/sh/include/uapi/asm/posix_types_32.h | 23 -
arch/sh/include/uapi/asm/ptrace.h | 30 -
arch/sh/include/uapi/asm/ptrace_32.h | 78 -
arch/sh/include/uapi/asm/sigcontext.h | 25 -
arch/sh/include/uapi/asm/signal.h | 18 -
arch/sh/include/uapi/asm/sockios.h | 18 -
arch/sh/include/uapi/asm/stat.h | 78 -
arch/sh/include/uapi/asm/swab.h | 50 -
arch/sh/include/uapi/asm/unistd.h | 2 -
arch/sh/kernel/.gitignore | 2 -
arch/sh/kernel/Makefile | 49 -
arch/sh/kernel/asm-offsets.c | 60 -
arch/sh/kernel/cpu/Makefile | 21 -
arch/sh/kernel/cpu/adc.c | 37 -
arch/sh/kernel/cpu/clock-cpg.c | 78 -
arch/sh/kernel/cpu/clock.c | 52 -
arch/sh/kernel/cpu/fpu.c | 92 -
arch/sh/kernel/cpu/init.c | 366 ----
arch/sh/kernel/cpu/irq/Makefile | 6 -
arch/sh/kernel/cpu/irq/imask.c | 85 -
arch/sh/kernel/cpu/irq/ipr.c | 80 -
arch/sh/kernel/cpu/pfc.c | 25 -
arch/sh/kernel/cpu/proc.c | 151 --
arch/sh/kernel/cpu/sh2/Makefile | 12 -
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74 -
arch/sh/kernel/cpu/sh2/entry.S | 373 ----
arch/sh/kernel/cpu/sh2/ex.S | 44 -
arch/sh/kernel/cpu/sh2/probe.c | 71 -
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 ---
arch/sh/kernel/cpu/sh2/smp-j2.c | 136 --
arch/sh/kernel/cpu/sh2a/Makefile | 25 -
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 82 -
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 78 -
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 80 -
arch/sh/kernel/cpu/sh2a/clock-sh7264.c | 157 --
arch/sh/kernel/cpu/sh2a/clock-sh7269.c | 181 --
arch/sh/kernel/cpu/sh2a/entry.S | 247 ---
arch/sh/kernel/cpu/sh2a/ex.S | 70 -
arch/sh/kernel/cpu/sh2a/fpu.c | 572 ------
arch/sh/kernel/cpu/sh2a/opcode_helper.c | 51 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 28 -
arch/sh/kernel/cpu/sh2a/probe.c | 57 -
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 175 --
arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 418 -----
arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 355 ----
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 291 ---
arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 552 ------
arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 568 ------
arch/sh/kernel/cpu/sh3/Makefile | 34 -
arch/sh/kernel/cpu/sh3/clock-sh3.c | 86 -
arch/sh/kernel/cpu/sh3/clock-sh7705.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7706.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 82 -
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 75 -
arch/sh/kernel/cpu/sh3/clock-sh7712.c | 68 -
arch/sh/kernel/cpu/sh3/entry.S | 509 ------
arch/sh/kernel/cpu/sh3/ex.S | 56 -
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 27 -
arch/sh/kernel/cpu/sh3/probe.c | 108 --
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 34 -
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 21 -
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 38 -
arch/sh/kernel/cpu/sh3/setup-sh3.c | 69 -
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 190 --
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 246 ---
arch/sh/kernel/cpu/sh3/setup-sh7710.c | 189 --
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 286 ---
arch/sh/kernel/cpu/sh3/swsusp.S | 144 --
arch/sh/kernel/cpu/sh4/Makefile | 37 -
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174 --
arch/sh/kernel/cpu/sh4/clock-sh4.c | 77 -
arch/sh/kernel/cpu/sh4/fpu.c | 425 -----
arch/sh/kernel/cpu/sh4/perf_event.c | 265 ---
arch/sh/kernel/cpu/sh4/probe.c | 260 ---
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139 --
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 359 ----
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 297 ---
arch/sh/kernel/cpu/sh4/softfloat.c | 930 ----------
arch/sh/kernel/cpu/sh4/sq.c | 414 -----
arch/sh/kernel/cpu/sh4a/Makefile | 53 -
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 277 ---
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 270 ---
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 253 ---
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 301 ----
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 367 ----
arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 256 ---
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 152 --
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 116 --
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 70 -
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 122 --
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 174 --
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 189 --
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 148 --
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 31 -
arch/sh/kernel/cpu/sh4a/perf_event.c | 299 ---
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 21 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 26 -
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 24 -
arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 444 -----
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 388 ----
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 666 -------
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 644 -------
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 1288 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 621 -------
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 1242 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 455 -----
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 571 ------
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 505 ------
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 608 -------
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 841 ---------
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 396 ----
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 146 --
arch/sh/kernel/cpu/sh4a/ubc.c | 130 --
arch/sh/kernel/cpu/shmobile/Makefile | 8 -
arch/sh/kernel/cpu/shmobile/cpuidle.c | 95 -
arch/sh/kernel/cpu/shmobile/pm.c | 153 --
arch/sh/kernel/cpu/shmobile/sleep.S | 402 -----
arch/sh/kernel/crash_dump.c | 27 -
arch/sh/kernel/debugtraps.S | 38 -
arch/sh/kernel/disassemble.c | 572 ------
arch/sh/kernel/dma-coherent.c | 33 -
arch/sh/kernel/dumpstack.c | 156 --
arch/sh/kernel/dwarf.c | 1206 -------------
arch/sh/kernel/entry-common.S | 400 ----
arch/sh/kernel/ftrace.c | 365 ----
arch/sh/kernel/head_32.S | 365 ----
arch/sh/kernel/hw_breakpoint.c | 408 -----
arch/sh/kernel/idle.c | 57 -
arch/sh/kernel/io.c | 111 --
arch/sh/kernel/io_trapped.c | 291 ---
arch/sh/kernel/iomap.c | 162 --
arch/sh/kernel/ioport.c | 41 -
arch/sh/kernel/irq.c | 249 ---
arch/sh/kernel/irq_32.c | 54 -
arch/sh/kernel/kdebugfs.c | 14 -
arch/sh/kernel/kgdb.c | 378 ----
arch/sh/kernel/kprobes.c | 452 -----
arch/sh/kernel/machine_kexec.c | 204 ---
arch/sh/kernel/machvec.c | 122 --
arch/sh/kernel/module.c | 104 --
arch/sh/kernel/nmi_debug.c | 75 -
arch/sh/kernel/perf_callchain.c | 32 -
arch/sh/kernel/perf_event.c | 363 ----
arch/sh/kernel/process.c | 77 -
arch/sh/kernel/process_32.c | 197 --
arch/sh/kernel/ptrace.c | 34 -
arch/sh/kernel/ptrace_32.c | 487 -----
arch/sh/kernel/reboot.c | 96 -
arch/sh/kernel/relocate_kernel.S | 230 ---
arch/sh/kernel/return_address.c | 56 -
arch/sh/kernel/setup.c | 356 ----
arch/sh/kernel/sh_bios.c | 169 --
arch/sh/kernel/sh_ksyms_32.c | 118 --
arch/sh/kernel/signal_32.c | 507 ------
arch/sh/kernel/smp.c | 471 -----
arch/sh/kernel/stacktrace.c | 79 -
arch/sh/kernel/swsusp.c | 35 -
arch/sh/kernel/sys_sh.c | 96 -
arch/sh/kernel/sys_sh32.c | 61 -
arch/sh/kernel/syscalls/Makefile | 32 -
arch/sh/kernel/syscalls/syscall.tbl | 455 -----
arch/sh/kernel/syscalls_32.S | 17 -
arch/sh/kernel/time.c | 45 -
arch/sh/kernel/topology.c | 74 -
arch/sh/kernel/traps.c | 204 ---
arch/sh/kernel/traps_32.c | 795 --------
arch/sh/kernel/unwinder.c | 165 --
arch/sh/kernel/vmlinux.lds.S | 82 -
arch/sh/kernel/vsyscall/.gitignore | 2 -
arch/sh/kernel/vsyscall/Makefile | 36 -
arch/sh/kernel/vsyscall/vsyscall-note.S | 26 -
arch/sh/kernel/vsyscall/vsyscall-sigreturn.S | 75 -
arch/sh/kernel/vsyscall/vsyscall-syscall.S | 11 -
arch/sh/kernel/vsyscall/vsyscall-trapa.S | 40 -
arch/sh/kernel/vsyscall/vsyscall.c | 93 -
arch/sh/kernel/vsyscall/vsyscall.lds.S | 85 -
arch/sh/lib/Makefile | 32 -
arch/sh/lib/__clear_user.S | 109 --
arch/sh/lib/ashiftrt.S | 128 --
arch/sh/lib/ashldi3.c | 30 -
arch/sh/lib/ashlsi3.S | 189 --
arch/sh/lib/ashrdi3.c | 32 -
arch/sh/lib/ashrsi3.S | 179 --
arch/sh/lib/checksum.S | 365 ----
arch/sh/lib/copy_page.S | 390 ----
arch/sh/lib/delay.c | 54 -
arch/sh/lib/div64-generic.c | 20 -
arch/sh/lib/div64.S | 47 -
arch/sh/lib/io.c | 79 -
arch/sh/lib/libgcc.h | 27 -
arch/sh/lib/lshrdi3.c | 30 -
arch/sh/lib/lshrsi3.S | 188 --
arch/sh/lib/mcount.S | 287 ---
arch/sh/lib/memchr.S | 27 -
arch/sh/lib/memcpy-sh4.S | 800 --------
arch/sh/lib/memcpy.S | 228 ---
arch/sh/lib/memmove.S | 255 ---
arch/sh/lib/memset-sh4.S | 108 --
arch/sh/lib/memset.S | 59 -
arch/sh/lib/movmem.S | 217 ---
arch/sh/lib/strlen.S | 71 -
arch/sh/lib/udiv_qrnnd.S | 60 -
arch/sh/lib/udivsi3.S | 66 -
arch/sh/lib/udivsi3_i4i-Os.S | 128 --
arch/sh/lib/udivsi3_i4i.S | 645 -------
arch/sh/math-emu/Makefile | 2 -
arch/sh/math-emu/math.c | 506 ------
arch/sh/math-emu/sfp-util.h | 73 -
arch/sh/mm/Kconfig | 254 ---
arch/sh/mm/Makefile | 45 -
arch/sh/mm/alignment.c | 189 --
arch/sh/mm/asids-debugfs.c | 59 -
arch/sh/mm/cache-debugfs.c | 109 --
arch/sh/mm/cache-j2.c | 64 -
arch/sh/mm/cache-sh2.c | 90 -
arch/sh/mm/cache-sh2a.c | 188 --
arch/sh/mm/cache-sh3.c | 102 --
arch/sh/mm/cache-sh4.c | 390 ----
arch/sh/mm/cache-sh7705.c | 194 --
arch/sh/mm/cache-shx3.c | 44 -
arch/sh/mm/cache.c | 360 ----
arch/sh/mm/consistent.c | 65 -
arch/sh/mm/extable_32.c | 24 -
arch/sh/mm/fault.c | 504 ------
arch/sh/mm/flush-sh4.c | 111 --
arch/sh/mm/hugetlbpage.c | 82 -
arch/sh/mm/init.c | 424 -----
arch/sh/mm/ioremap.c | 192 --
arch/sh/mm/ioremap.h | 23 -
arch/sh/mm/ioremap_fixed.c | 135 --
arch/sh/mm/kmap.c | 65 -
arch/sh/mm/mmap.c | 184 --
arch/sh/mm/nommu.c | 98 -
arch/sh/mm/numa.c | 56 -
arch/sh/mm/pgtable.c | 57 -
arch/sh/mm/pmb.c | 887 ---------
arch/sh/mm/sram.c | 35 -
arch/sh/mm/tlb-debugfs.c | 160 --
arch/sh/mm/tlb-pteaex.c | 106 --
arch/sh/mm/tlb-sh3.c | 95 -
arch/sh/mm/tlb-sh4.c | 108 --
arch/sh/mm/tlb-urb.c | 93 -
arch/sh/mm/tlbex_32.c | 82 -
arch/sh/mm/tlbflush_32.c | 137 --
arch/sh/mm/uncached.c | 44 -
arch/sh/tools/Makefile | 16 -
arch/sh/tools/gen-mach-types | 48 -
arch/sh/tools/mach-types | 67 -
drivers/clocksource/sh_cmt.c | 8 -
drivers/clocksource/sh_mtu2.c | 8 -
drivers/clocksource/sh_tmu.c | 8 -
drivers/i2c/busses/Kconfig | 4 +-
drivers/media/platform/renesas/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 6 +-
drivers/mmc/host/sh_mmcif.c | 21 +-
drivers/net/ethernet/8390/Kconfig | 2 +-
drivers/net/ethernet/renesas/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 4 +-
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-sh.c | 18 +-
drivers/spi/Kconfig | 4 +-
drivers/tty/serial/Kconfig | 3 +-
drivers/tty/serial/sh-sci.c | 57 -
drivers/tty/vt/keyboard.c | 2 +-
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/video/console/Kconfig | 2 +-
drivers/video/logo/Kconfig | 15 -
drivers/video/logo/Makefile | 3 -
drivers/video/logo/logo.c | 12 -
drivers/video/logo/logo_superh_clut224.ppm | 1604 -----------------
drivers/video/logo/logo_superh_vga16.ppm | 1604 -----------------
fs/Kconfig.binfmt | 2 +-
fs/minix/Kconfig | 2 +-
include/linux/cpuhotplug.h | 1 -
include/linux/sh_intc.h | 4 -
init/Kconfig | 2 +-
kernel/sysctl.c | 3 +-
lib/Kconfig.debug | 2 +-
lib/math/div64.c | 4 +-
lib/test_user_copy.c | 3 +-
scripts/coccinelle/misc/cond_no_effect.cocci | 13 +-
scripts/head-object-list.txt | 1 -
sound/soc/sh/Kconfig | 4 +-
tools/include/asm/barrier.h | 2 -
tools/perf/util/dwarf-regs.c | 1 -
785 files changed, 36 insertions(+), 97715 deletions(-)
delete mode 100644 Documentation/sh/booting.rst
delete mode 100644 Documentation/sh/features.rst
delete mode 100644 Documentation/sh/index.rst
delete mode 100644 Documentation/sh/new-machine.rst
delete mode 100644 Documentation/sh/register-banks.rst
delete mode 100644 arch/sh/Kbuild
delete mode 100644 arch/sh/Kconfig
delete mode 100644 arch/sh/Kconfig.cpu
delete mode 100644 arch/sh/Kconfig.debug
delete mode 100644 arch/sh/Makefile
delete mode 100644 arch/sh/boards/Kconfig
delete mode 100644 arch/sh/boards/Makefile
delete mode 100644 arch/sh/boards/board-apsh4a3a.c
delete mode 100644 arch/sh/boards/board-apsh4ad0a.c
delete mode 100644 arch/sh/boards/board-edosk7705.c
delete mode 100644 arch/sh/boards/board-edosk7760.c
delete mode 100644 arch/sh/boards/board-espt.c
delete mode 100644 arch/sh/boards/board-magicpanelr2.c
delete mode 100644 arch/sh/boards/board-polaris.c
delete mode 100644 arch/sh/boards/board-secureedge5410.c
delete mode 100644 arch/sh/boards/board-sh2007.c
delete mode 100644 arch/sh/boards/board-sh7757lcr.c
delete mode 100644 arch/sh/boards/board-sh7785lcr.c
delete mode 100644 arch/sh/boards/board-shmin.c
delete mode 100644 arch/sh/boards/board-titan.c
delete mode 100644 arch/sh/boards/board-urquell.c
delete mode 100644 arch/sh/boards/mach-ap325rxa/Makefile
delete mode 100644 arch/sh/boards/mach-ap325rxa/sdram.S
delete mode 100644 arch/sh/boards/mach-ap325rxa/setup.c
delete mode 100644 arch/sh/boards/mach-dreamcast/Makefile
delete mode 100644 arch/sh/boards/mach-dreamcast/irq.c
delete mode 100644 arch/sh/boards/mach-dreamcast/rtc.c
delete mode 100644 arch/sh/boards/mach-dreamcast/setup.c
delete mode 100644 arch/sh/boards/mach-ecovec24/Makefile
delete mode 100644 arch/sh/boards/mach-ecovec24/sdram.S
delete mode 100644 arch/sh/boards/mach-ecovec24/setup.c
delete mode 100644 arch/sh/boards/mach-highlander/Kconfig
delete mode 100644 arch/sh/boards/mach-highlander/Makefile
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780mp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780rp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/pinmux-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/psw.c
delete mode 100644 arch/sh/boards/mach-highlander/setup.c
delete mode 100644 arch/sh/boards/mach-hp6xx/Makefile
delete mode 100644 arch/sh/boards/mach-hp6xx/hp6xx_apm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm_wakeup.S
delete mode 100644 arch/sh/boards/mach-hp6xx/setup.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/Makefile
delete mode 100644 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/sdram.S
delete mode 100644 arch/sh/boards/mach-kfr2r09/setup.c
delete mode 100644 arch/sh/boards/mach-landisk/Makefile
delete mode 100644 arch/sh/boards/mach-landisk/gio.c
delete mode 100644 arch/sh/boards/mach-landisk/irq.c
delete mode 100644 arch/sh/boards/mach-landisk/psw.c
delete mode 100644 arch/sh/boards/mach-landisk/setup.c
delete mode 100644 arch/sh/boards/mach-lboxre2/Makefile
delete mode 100644 arch/sh/boards/mach-lboxre2/irq.c
delete mode 100644 arch/sh/boards/mach-lboxre2/setup.c
delete mode 100644 arch/sh/boards/mach-microdev/Makefile
delete mode 100644 arch/sh/boards/mach-microdev/fdc37c93xapm.c
delete mode 100644 arch/sh/boards/mach-microdev/io.c
delete mode 100644 arch/sh/boards/mach-microdev/irq.c
delete mode 100644 arch/sh/boards/mach-microdev/setup.c
delete mode 100644 arch/sh/boards/mach-migor/Kconfig
delete mode 100644 arch/sh/boards/mach-migor/Makefile
delete mode 100644 arch/sh/boards/mach-migor/lcd_qvga.c
delete mode 100644 arch/sh/boards/mach-migor/sdram.S
delete mode 100644 arch/sh/boards/mach-migor/setup.c
delete mode 100644 arch/sh/boards/mach-r2d/Kconfig
delete mode 100644 arch/sh/boards/mach-r2d/Makefile
delete mode 100644 arch/sh/boards/mach-r2d/irq.c
delete mode 100644 arch/sh/boards/mach-r2d/setup.c
delete mode 100644 arch/sh/boards/mach-rsk/Kconfig
delete mode 100644 arch/sh/boards/mach-rsk/Makefile
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7203.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7264.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7269.c
delete mode 100644 arch/sh/boards/mach-rsk/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7780/Kconfig
delete mode 100644 arch/sh/boards/mach-sdk7780/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7780/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7780/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7786/fpga.c
delete mode 100644 arch/sh/boards/mach-sdk7786/gpio.c
delete mode 100644 arch/sh/boards/mach-sdk7786/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7786/nmi.c
delete mode 100644 arch/sh/boards/mach-sdk7786/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/sram.c
delete mode 100644 arch/sh/boards/mach-se/7206/Makefile
delete mode 100644 arch/sh/boards/mach-se/7206/irq.c
delete mode 100644 arch/sh/boards/mach-se/7206/setup.c
delete mode 100644 arch/sh/boards/mach-se/7343/Makefile
delete mode 100644 arch/sh/boards/mach-se/7343/irq.c
delete mode 100644 arch/sh/boards/mach-se/7343/setup.c
delete mode 100644 arch/sh/boards/mach-se/770x/Makefile
delete mode 100644 arch/sh/boards/mach-se/770x/irq.c
delete mode 100644 arch/sh/boards/mach-se/770x/setup.c
delete mode 100644 arch/sh/boards/mach-se/7721/Makefile
delete mode 100644 arch/sh/boards/mach-se/7721/irq.c
delete mode 100644 arch/sh/boards/mach-se/7721/setup.c
delete mode 100644 arch/sh/boards/mach-se/7722/Makefile
delete mode 100644 arch/sh/boards/mach-se/7722/irq.c
delete mode 100644 arch/sh/boards/mach-se/7722/setup.c
delete mode 100644 arch/sh/boards/mach-se/7724/Makefile
delete mode 100644 arch/sh/boards/mach-se/7724/irq.c
delete mode 100644 arch/sh/boards/mach-se/7724/sdram.S
delete mode 100644 arch/sh/boards/mach-se/7724/setup.c
delete mode 100644 arch/sh/boards/mach-se/7751/Makefile
delete mode 100644 arch/sh/boards/mach-se/7751/irq.c
delete mode 100644 arch/sh/boards/mach-se/7751/setup.c
delete mode 100644 arch/sh/boards/mach-se/7780/Makefile
delete mode 100644 arch/sh/boards/mach-se/7780/irq.c
delete mode 100644 arch/sh/boards/mach-se/7780/setup.c
delete mode 100644 arch/sh/boards/mach-se/Makefile
delete mode 100644 arch/sh/boards/mach-se/board-se7619.c
delete mode 100644 arch/sh/boards/mach-sh03/Makefile
delete mode 100644 arch/sh/boards/mach-sh03/rtc.c
delete mode 100644 arch/sh/boards/mach-sh03/setup.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/Makefile
delete mode 100644 arch/sh/boards/mach-sh7763rdp/irq.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/setup.c
delete mode 100644 arch/sh/boards/mach-x3proto/Makefile
delete mode 100644 arch/sh/boards/mach-x3proto/gpio.c
delete mode 100644 arch/sh/boards/mach-x3proto/ilsel.c
delete mode 100644 arch/sh/boards/mach-x3proto/setup.c
delete mode 100644 arch/sh/boards/of-generic.c
delete mode 100644 arch/sh/boot/.gitignore
delete mode 100644 arch/sh/boot/Makefile
delete mode 100644 arch/sh/boot/compressed/.gitignore
delete mode 100644 arch/sh/boot/compressed/Makefile
delete mode 100644 arch/sh/boot/compressed/ashiftrt.S
delete mode 100644 arch/sh/boot/compressed/ashldi3.c
delete mode 100644 arch/sh/boot/compressed/ashlsi3.S
delete mode 100644 arch/sh/boot/compressed/ashrsi3.S
delete mode 100644 arch/sh/boot/compressed/cache.c
delete mode 100644 arch/sh/boot/compressed/head_32.S
delete mode 100644 arch/sh/boot/compressed/head_64.S
delete mode 100644 arch/sh/boot/compressed/lshrsi3.S
delete mode 100644 arch/sh/boot/compressed/misc.c
delete mode 100644 arch/sh/boot/compressed/vmlinux.scr
delete mode 100644 arch/sh/boot/dts/Makefile
delete mode 100644 arch/sh/boot/dts/j2_mimas_v2.dts
delete mode 100644 arch/sh/boot/romimage/Makefile
delete mode 100644 arch/sh/boot/romimage/head.S
delete mode 100644 arch/sh/boot/romimage/mmcif-sh7724.c
delete mode 100644 arch/sh/boot/romimage/vmlinux.scr
delete mode 100644 arch/sh/cchips/Kconfig
delete mode 100644 arch/sh/cchips/hd6446x/Makefile
delete mode 100644 arch/sh/cchips/hd6446x/hd64461.c
delete mode 100644 arch/sh/configs/ap325rxa_defconfig
delete mode 100644 arch/sh/configs/apsh4a3a_defconfig
delete mode 100644 arch/sh/configs/apsh4ad0a_defconfig
delete mode 100644 arch/sh/configs/dreamcast_defconfig
delete mode 100644 arch/sh/configs/ecovec24-romimage_defconfig
delete mode 100644 arch/sh/configs/ecovec24_defconfig
delete mode 100644 arch/sh/configs/edosk7705_defconfig
delete mode 100644 arch/sh/configs/edosk7760_defconfig
delete mode 100644 arch/sh/configs/espt_defconfig
delete mode 100644 arch/sh/configs/hp6xx_defconfig
delete mode 100644 arch/sh/configs/j2_defconfig
delete mode 100644 arch/sh/configs/kfr2r09-romimage_defconfig
delete mode 100644 arch/sh/configs/kfr2r09_defconfig
delete mode 100644 arch/sh/configs/landisk_defconfig
delete mode 100644 arch/sh/configs/lboxre2_defconfig
delete mode 100644 arch/sh/configs/magicpanelr2_defconfig
delete mode 100644 arch/sh/configs/microdev_defconfig
delete mode 100644 arch/sh/configs/migor_defconfig
delete mode 100644 arch/sh/configs/polaris_defconfig
delete mode 100644 arch/sh/configs/r7780mp_defconfig
delete mode 100644 arch/sh/configs/r7785rp_defconfig
delete mode 100644 arch/sh/configs/rsk7201_defconfig
delete mode 100644 arch/sh/configs/rsk7203_defconfig
delete mode 100644 arch/sh/configs/rsk7264_defconfig
delete mode 100644 arch/sh/configs/rsk7269_defconfig
delete mode 100644 arch/sh/configs/rts7751r2d1_defconfig
delete mode 100644 arch/sh/configs/rts7751r2dplus_defconfig
delete mode 100644 arch/sh/configs/sdk7780_defconfig
delete mode 100644 arch/sh/configs/sdk7786_defconfig
delete mode 100644 arch/sh/configs/se7206_defconfig
delete mode 100644 arch/sh/configs/se7343_defconfig
delete mode 100644 arch/sh/configs/se7619_defconfig
delete mode 100644 arch/sh/configs/se7705_defconfig
delete mode 100644 arch/sh/configs/se7712_defconfig
delete mode 100644 arch/sh/configs/se7721_defconfig
delete mode 100644 arch/sh/configs/se7722_defconfig
delete mode 100644 arch/sh/configs/se7724_defconfig
delete mode 100644 arch/sh/configs/se7750_defconfig
delete mode 100644 arch/sh/configs/se7751_defconfig
delete mode 100644 arch/sh/configs/se7780_defconfig
delete mode 100644 arch/sh/configs/secureedge5410_defconfig
delete mode 100644 arch/sh/configs/sh03_defconfig
delete mode 100644 arch/sh/configs/sh2007_defconfig
delete mode 100644 arch/sh/configs/sh7710voipgw_defconfig
delete mode 100644 arch/sh/configs/sh7724_generic_defconfig
delete mode 100644 arch/sh/configs/sh7757lcr_defconfig
delete mode 100644 arch/sh/configs/sh7763rdp_defconfig
delete mode 100644 arch/sh/configs/sh7770_generic_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_32bit_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_defconfig
delete mode 100644 arch/sh/configs/shmin_defconfig
delete mode 100644 arch/sh/configs/shx3_defconfig
delete mode 100644 arch/sh/configs/titan_defconfig
delete mode 100644 arch/sh/configs/ul2_defconfig
delete mode 100644 arch/sh/configs/urquell_defconfig
delete mode 100644 arch/sh/drivers/Kconfig
delete mode 100644 arch/sh/drivers/Makefile
delete mode 100644 arch/sh/drivers/dma/Kconfig
delete mode 100644 arch/sh/drivers/dma/Makefile
delete mode 100644 arch/sh/drivers/dma/dma-api.c
delete mode 100644 arch/sh/drivers/dma/dma-g2.c
delete mode 100644 arch/sh/drivers/dma/dma-pvr2.c
delete mode 100644 arch/sh/drivers/dma/dma-sh.c
delete mode 100644 arch/sh/drivers/dma/dma-sysfs.c
delete mode 100644 arch/sh/drivers/dma/dmabrg.c
delete mode 100644 arch/sh/drivers/heartbeat.c
delete mode 100644 arch/sh/drivers/pci/Makefile
delete mode 100644 arch/sh/drivers/pci/common.c
delete mode 100644 arch/sh/drivers/pci/fixups-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/fixups-landisk.c
delete mode 100644 arch/sh/drivers/pci/fixups-r7780rp.c
delete mode 100644 arch/sh/drivers/pci/fixups-rts7751r2d.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7780.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7786.c
delete mode 100644 arch/sh/drivers/pci/fixups-se7751.c
delete mode 100644 arch/sh/drivers/pci/fixups-sh03.c
delete mode 100644 arch/sh/drivers/pci/fixups-snapgear.c
delete mode 100644 arch/sh/drivers/pci/fixups-titan.c
delete mode 100644 arch/sh/drivers/pci/ops-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/ops-sh4.c
delete mode 100644 arch/sh/drivers/pci/ops-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pci-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/pci-sh4.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.h
delete mode 100644 arch/sh/drivers/pci/pci.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.h
delete mode 100644 arch/sh/drivers/platform_early.c
delete mode 100644 arch/sh/drivers/push-switch.c
delete mode 100644 arch/sh/drivers/superhyway/Makefile
delete mode 100644 arch/sh/drivers/superhyway/ops-sh4-202.c
delete mode 100644 arch/sh/include/asm/Kbuild
delete mode 100644 arch/sh/include/asm/adc.h
delete mode 100644 arch/sh/include/asm/addrspace.h
delete mode 100644 arch/sh/include/asm/alignment.h
delete mode 100644 arch/sh/include/asm/asm-offsets.h
delete mode 100644 arch/sh/include/asm/atomic-grb.h
delete mode 100644 arch/sh/include/asm/atomic-irq.h
delete mode 100644 arch/sh/include/asm/atomic-llsc.h
delete mode 100644 arch/sh/include/asm/atomic.h
delete mode 100644 arch/sh/include/asm/barrier.h
delete mode 100644 arch/sh/include/asm/bitops-cas.h
delete mode 100644 arch/sh/include/asm/bitops-grb.h
delete mode 100644 arch/sh/include/asm/bitops-llsc.h
delete mode 100644 arch/sh/include/asm/bitops-op32.h
delete mode 100644 arch/sh/include/asm/bitops.h
delete mode 100644 arch/sh/include/asm/bl_bit.h
delete mode 100644 arch/sh/include/asm/bl_bit_32.h
delete mode 100644 arch/sh/include/asm/bug.h
delete mode 100644 arch/sh/include/asm/bugs.h
delete mode 100644 arch/sh/include/asm/cache.h
delete mode 100644 arch/sh/include/asm/cache_insns.h
delete mode 100644 arch/sh/include/asm/cache_insns_32.h
delete mode 100644 arch/sh/include/asm/cacheflush.h
delete mode 100644 arch/sh/include/asm/checksum.h
delete mode 100644 arch/sh/include/asm/checksum_32.h
delete mode 100644 arch/sh/include/asm/clock.h
delete mode 100644 arch/sh/include/asm/cmpxchg-cas.h
delete mode 100644 arch/sh/include/asm/cmpxchg-grb.h
delete mode 100644 arch/sh/include/asm/cmpxchg-irq.h
delete mode 100644 arch/sh/include/asm/cmpxchg-llsc.h
delete mode 100644 arch/sh/include/asm/cmpxchg-xchg.h
delete mode 100644 arch/sh/include/asm/cmpxchg.h
delete mode 100644 arch/sh/include/asm/device.h
delete mode 100644 arch/sh/include/asm/dma-register.h
delete mode 100644 arch/sh/include/asm/dma.h
delete mode 100644 arch/sh/include/asm/dmabrg.h
delete mode 100644 arch/sh/include/asm/dwarf.h
delete mode 100644 arch/sh/include/asm/elf.h
delete mode 100644 arch/sh/include/asm/entry-macros.S
delete mode 100644 arch/sh/include/asm/extable.h
delete mode 100644 arch/sh/include/asm/fb.h
delete mode 100644 arch/sh/include/asm/fixmap.h
delete mode 100644 arch/sh/include/asm/flat.h
delete mode 100644 arch/sh/include/asm/fpu.h
delete mode 100644 arch/sh/include/asm/freq.h
delete mode 100644 arch/sh/include/asm/ftrace.h
delete mode 100644 arch/sh/include/asm/futex-cas.h
delete mode 100644 arch/sh/include/asm/futex-irq.h
delete mode 100644 arch/sh/include/asm/futex-llsc.h
delete mode 100644 arch/sh/include/asm/futex.h
delete mode 100644 arch/sh/include/asm/gpio.h
delete mode 100644 arch/sh/include/asm/hardirq.h
delete mode 100644 arch/sh/include/asm/hd64461.h
delete mode 100644 arch/sh/include/asm/heartbeat.h
delete mode 100644 arch/sh/include/asm/hugetlb.h
delete mode 100644 arch/sh/include/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/asm/hw_irq.h
delete mode 100644 arch/sh/include/asm/i2c-sh7760.h
delete mode 100644 arch/sh/include/asm/io.h
delete mode 100644 arch/sh/include/asm/io_generic.h
delete mode 100644 arch/sh/include/asm/io_noioport.h
delete mode 100644 arch/sh/include/asm/io_trapped.h
delete mode 100644 arch/sh/include/asm/irq.h
delete mode 100644 arch/sh/include/asm/irqflags.h
delete mode 100644 arch/sh/include/asm/kdebug.h
delete mode 100644 arch/sh/include/asm/kexec.h
delete mode 100644 arch/sh/include/asm/kgdb.h
delete mode 100644 arch/sh/include/asm/kprobes.h
delete mode 100644 arch/sh/include/asm/linkage.h
delete mode 100644 arch/sh/include/asm/machvec.h
delete mode 100644 arch/sh/include/asm/mmiowb.h
delete mode 100644 arch/sh/include/asm/mmu.h
delete mode 100644 arch/sh/include/asm/mmu_context.h
delete mode 100644 arch/sh/include/asm/mmu_context_32.h
delete mode 100644 arch/sh/include/asm/mmzone.h
delete mode 100644 arch/sh/include/asm/module.h
delete mode 100644 arch/sh/include/asm/page.h
delete mode 100644 arch/sh/include/asm/pci.h
delete mode 100644 arch/sh/include/asm/perf_event.h
delete mode 100644 arch/sh/include/asm/pgalloc.h
delete mode 100644 arch/sh/include/asm/pgtable-2level.h
delete mode 100644 arch/sh/include/asm/pgtable-3level.h
delete mode 100644 arch/sh/include/asm/pgtable.h
delete mode 100644 arch/sh/include/asm/pgtable_32.h
delete mode 100644 arch/sh/include/asm/platform_early.h
delete mode 100644 arch/sh/include/asm/posix_types.h
delete mode 100644 arch/sh/include/asm/processor.h
delete mode 100644 arch/sh/include/asm/processor_32.h
delete mode 100644 arch/sh/include/asm/ptrace.h
delete mode 100644 arch/sh/include/asm/ptrace_32.h
delete mode 100644 arch/sh/include/asm/push-switch.h
delete mode 100644 arch/sh/include/asm/reboot.h
delete mode 100644 arch/sh/include/asm/romimage-macros.h
delete mode 100644 arch/sh/include/asm/rtc.h
delete mode 100644 arch/sh/include/asm/seccomp.h
delete mode 100644 arch/sh/include/asm/sections.h
delete mode 100644 arch/sh/include/asm/setup.h
delete mode 100644 arch/sh/include/asm/sfp-machine.h
delete mode 100644 arch/sh/include/asm/sh7760fb.h
delete mode 100644 arch/sh/include/asm/sh_bios.h
delete mode 100644 arch/sh/include/asm/shmparam.h
delete mode 100644 arch/sh/include/asm/siu.h
delete mode 100644 arch/sh/include/asm/smc37c93x.h
delete mode 100644 arch/sh/include/asm/smp-ops.h
delete mode 100644 arch/sh/include/asm/smp.h
delete mode 100644 arch/sh/include/asm/sparsemem.h
delete mode 100644 arch/sh/include/asm/spi.h
delete mode 100644 arch/sh/include/asm/spinlock-cas.h
delete mode 100644 arch/sh/include/asm/spinlock-llsc.h
delete mode 100644 arch/sh/include/asm/spinlock.h
delete mode 100644 arch/sh/include/asm/spinlock_types.h
delete mode 100644 arch/sh/include/asm/sram.h
delete mode 100644 arch/sh/include/asm/stackprotector.h
delete mode 100644 arch/sh/include/asm/stacktrace.h
delete mode 100644 arch/sh/include/asm/string.h
delete mode 100644 arch/sh/include/asm/string_32.h
delete mode 100644 arch/sh/include/asm/suspend.h
delete mode 100644 arch/sh/include/asm/switch_to.h
delete mode 100644 arch/sh/include/asm/switch_to_32.h
delete mode 100644 arch/sh/include/asm/syscall.h
delete mode 100644 arch/sh/include/asm/syscall_32.h
delete mode 100644 arch/sh/include/asm/syscalls.h
delete mode 100644 arch/sh/include/asm/syscalls_32.h
delete mode 100644 arch/sh/include/asm/thread_info.h
delete mode 100644 arch/sh/include/asm/timex.h
delete mode 100644 arch/sh/include/asm/tlb.h
delete mode 100644 arch/sh/include/asm/tlbflush.h
delete mode 100644 arch/sh/include/asm/topology.h
delete mode 100644 arch/sh/include/asm/traps.h
delete mode 100644 arch/sh/include/asm/traps_32.h
delete mode 100644 arch/sh/include/asm/types.h
delete mode 100644 arch/sh/include/asm/uaccess.h
delete mode 100644 arch/sh/include/asm/uaccess_32.h
delete mode 100644 arch/sh/include/asm/uncached.h
delete mode 100644 arch/sh/include/asm/unistd.h
delete mode 100644 arch/sh/include/asm/unwinder.h
delete mode 100644 arch/sh/include/asm/user.h
delete mode 100644 arch/sh/include/asm/vermagic.h
delete mode 100644 arch/sh/include/asm/vga.h
delete mode 100644 arch/sh/include/asm/vmalloc.h
delete mode 100644 arch/sh/include/asm/vmlinux.lds.h
delete mode 100644 arch/sh/include/asm/watchdog.h
delete mode 100644 arch/sh/include/asm/word-at-a-time.h
delete mode 100644 arch/sh/include/cpu-common/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-common/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-common/cpu/timer.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7203.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7264.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7269.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/adc.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dac.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/gpio.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/serial.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/sh7720.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/fpu.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7722.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7723.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7724.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7734.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7757.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7785.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7786.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/shx3.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/serial.h
delete mode 100644 arch/sh/include/mach-common/mach/highlander.h
delete mode 100644 arch/sh/include/mach-common/mach/hp6xx.h
delete mode 100644 arch/sh/include/mach-common/mach/lboxre2.h
delete mode 100644 arch/sh/include/mach-common/mach/magicpanelr2.h
delete mode 100644 arch/sh/include/mach-common/mach/mangle-port.h
delete mode 100644 arch/sh/include/mach-common/mach/microdev.h
delete mode 100644 arch/sh/include/mach-common/mach/r2d.h
delete mode 100644 arch/sh/include/mach-common/mach/romimage.h
delete mode 100644 arch/sh/include/mach-common/mach/sdk7780.h
delete mode 100644 arch/sh/include/mach-common/mach/secureedge5410.h
delete mode 100644 arch/sh/include/mach-common/mach/sh2007.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7763rdp.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7785lcr.h
delete mode 100644 arch/sh/include/mach-common/mach/shmin.h
delete mode 100644 arch/sh/include/mach-common/mach/titan.h
delete mode 100644 arch/sh/include/mach-common/mach/urquell.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/dma.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/maple.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/pci.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/sysasic.h
delete mode 100644 arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-ecovec24/mach/romimage.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/romimage.h
delete mode 100644 arch/sh/include/mach-landisk/mach/gio.h
delete mode 100644 arch/sh/include/mach-landisk/mach/iodata_landisk.h
delete mode 100644 arch/sh/include/mach-migor/mach/migor.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/fpga.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/irq.h
delete mode 100644 arch/sh/include/mach-se/mach/mrshpc.h
delete mode 100644 arch/sh/include/mach-se/mach/se.h
delete mode 100644 arch/sh/include/mach-se/mach/se7206.h
delete mode 100644 arch/sh/include/mach-se/mach/se7343.h
delete mode 100644 arch/sh/include/mach-se/mach/se7721.h
delete mode 100644 arch/sh/include/mach-se/mach/se7722.h
delete mode 100644 arch/sh/include/mach-se/mach/se7724.h
delete mode 100644 arch/sh/include/mach-se/mach/se7751.h
delete mode 100644 arch/sh/include/mach-se/mach/se7780.h
delete mode 100644 arch/sh/include/mach-sh03/mach/io.h
delete mode 100644 arch/sh/include/mach-sh03/mach/sh03.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/hardware.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/ilsel.h
delete mode 100644 arch/sh/include/uapi/asm/Kbuild
delete mode 100644 arch/sh/include/uapi/asm/auxvec.h
delete mode 100644 arch/sh/include/uapi/asm/byteorder.h
delete mode 100644 arch/sh/include/uapi/asm/cachectl.h
delete mode 100644 arch/sh/include/uapi/asm/cpu-features.h
delete mode 100644 arch/sh/include/uapi/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/uapi/asm/ioctls.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types_32.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace_32.h
delete mode 100644 arch/sh/include/uapi/asm/sigcontext.h
delete mode 100644 arch/sh/include/uapi/asm/signal.h
delete mode 100644 arch/sh/include/uapi/asm/sockios.h
delete mode 100644 arch/sh/include/uapi/asm/stat.h
delete mode 100644 arch/sh/include/uapi/asm/swab.h
delete mode 100644 arch/sh/include/uapi/asm/unistd.h
delete mode 100644 arch/sh/kernel/.gitignore
delete mode 100644 arch/sh/kernel/Makefile
delete mode 100644 arch/sh/kernel/asm-offsets.c
delete mode 100644 arch/sh/kernel/cpu/Makefile
delete mode 100644 arch/sh/kernel/cpu/adc.c
delete mode 100644 arch/sh/kernel/cpu/clock-cpg.c
delete mode 100644 arch/sh/kernel/cpu/clock.c
delete mode 100644 arch/sh/kernel/cpu/fpu.c
delete mode 100644 arch/sh/kernel/cpu/init.c
delete mode 100644 arch/sh/kernel/cpu/irq/Makefile
delete mode 100644 arch/sh/kernel/cpu/irq/imask.c
delete mode 100644 arch/sh/kernel/cpu/irq/ipr.c
delete mode 100644 arch/sh/kernel/cpu/pfc.c
delete mode 100644 arch/sh/kernel/cpu/proc.c
delete mode 100644 arch/sh/kernel/cpu/sh2/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2/clock-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2/setup-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/smp-j2.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/opcode_helper.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh3/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7706.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7709.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7712.c
delete mode 100644 arch/sh/kernel/cpu/sh3/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh3/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/swsusp.S
delete mode 100644 arch/sh/kernel/cpu/sh4/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4.c
delete mode 100644 arch/sh/kernel/cpu/sh4/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh4/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7750.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7760.c
delete mode 100644 arch/sh/kernel/cpu/sh4/softfloat.c
delete mode 100644 arch/sh/kernel/cpu/sh4/sq.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/intc-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/serial-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/smp-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/ubc.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/Makefile
delete mode 100644 arch/sh/kernel/cpu/shmobile/cpuidle.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/pm.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/sleep.S
delete mode 100644 arch/sh/kernel/crash_dump.c
delete mode 100644 arch/sh/kernel/debugtraps.S
delete mode 100644 arch/sh/kernel/disassemble.c
delete mode 100644 arch/sh/kernel/dma-coherent.c
delete mode 100644 arch/sh/kernel/dumpstack.c
delete mode 100644 arch/sh/kernel/dwarf.c
delete mode 100644 arch/sh/kernel/entry-common.S
delete mode 100644 arch/sh/kernel/ftrace.c
delete mode 100644 arch/sh/kernel/head_32.S
delete mode 100644 arch/sh/kernel/hw_breakpoint.c
delete mode 100644 arch/sh/kernel/idle.c
delete mode 100644 arch/sh/kernel/io.c
delete mode 100644 arch/sh/kernel/io_trapped.c
delete mode 100644 arch/sh/kernel/iomap.c
delete mode 100644 arch/sh/kernel/ioport.c
delete mode 100644 arch/sh/kernel/irq.c
delete mode 100644 arch/sh/kernel/irq_32.c
delete mode 100644 arch/sh/kernel/kdebugfs.c
delete mode 100644 arch/sh/kernel/kgdb.c
delete mode 100644 arch/sh/kernel/kprobes.c
delete mode 100644 arch/sh/kernel/machine_kexec.c
delete mode 100644 arch/sh/kernel/machvec.c
delete mode 100644 arch/sh/kernel/module.c
delete mode 100644 arch/sh/kernel/nmi_debug.c
delete mode 100644 arch/sh/kernel/perf_callchain.c
delete mode 100644 arch/sh/kernel/perf_event.c
delete mode 100644 arch/sh/kernel/process.c
delete mode 100644 arch/sh/kernel/process_32.c
delete mode 100644 arch/sh/kernel/ptrace.c
delete mode 100644 arch/sh/kernel/ptrace_32.c
delete mode 100644 arch/sh/kernel/reboot.c
delete mode 100644 arch/sh/kernel/relocate_kernel.S
delete mode 100644 arch/sh/kernel/return_address.c
delete mode 100644 arch/sh/kernel/setup.c
delete mode 100644 arch/sh/kernel/sh_bios.c
delete mode 100644 arch/sh/kernel/sh_ksyms_32.c
delete mode 100644 arch/sh/kernel/signal_32.c
delete mode 100644 arch/sh/kernel/smp.c
delete mode 100644 arch/sh/kernel/stacktrace.c
delete mode 100644 arch/sh/kernel/swsusp.c
delete mode 100644 arch/sh/kernel/sys_sh.c
delete mode 100644 arch/sh/kernel/sys_sh32.c
delete mode 100644 arch/sh/kernel/syscalls/Makefile
delete mode 100644 arch/sh/kernel/syscalls/syscall.tbl
delete mode 100644 arch/sh/kernel/syscalls_32.S
delete mode 100644 arch/sh/kernel/time.c
delete mode 100644 arch/sh/kernel/topology.c
delete mode 100644 arch/sh/kernel/traps.c
delete mode 100644 arch/sh/kernel/traps_32.c
delete mode 100644 arch/sh/kernel/unwinder.c
delete mode 100644 arch/sh/kernel/vmlinux.lds.S
delete mode 100644 arch/sh/kernel/vsyscall/.gitignore
delete mode 100644 arch/sh/kernel/vsyscall/Makefile
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-note.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-syscall.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-trapa.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.c
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.lds.S
delete mode 100644 arch/sh/lib/Makefile
delete mode 100644 arch/sh/lib/__clear_user.S
delete mode 100644 arch/sh/lib/ashiftrt.S
delete mode 100644 arch/sh/lib/ashldi3.c
delete mode 100644 arch/sh/lib/ashlsi3.S
delete mode 100644 arch/sh/lib/ashrdi3.c
delete mode 100644 arch/sh/lib/ashrsi3.S
delete mode 100644 arch/sh/lib/checksum.S
delete mode 100644 arch/sh/lib/copy_page.S
delete mode 100644 arch/sh/lib/delay.c
delete mode 100644 arch/sh/lib/div64-generic.c
delete mode 100644 arch/sh/lib/div64.S
delete mode 100644 arch/sh/lib/io.c
delete mode 100644 arch/sh/lib/libgcc.h
delete mode 100644 arch/sh/lib/lshrdi3.c
delete mode 100644 arch/sh/lib/lshrsi3.S
delete mode 100644 arch/sh/lib/mcount.S
delete mode 100644 arch/sh/lib/memchr.S
delete mode 100644 arch/sh/lib/memcpy-sh4.S
delete mode 100644 arch/sh/lib/memcpy.S
delete mode 100644 arch/sh/lib/memmove.S
delete mode 100644 arch/sh/lib/memset-sh4.S
delete mode 100644 arch/sh/lib/memset.S
delete mode 100644 arch/sh/lib/movmem.S
delete mode 100644 arch/sh/lib/strlen.S
delete mode 100644 arch/sh/lib/udiv_qrnnd.S
delete mode 100644 arch/sh/lib/udivsi3.S
delete mode 100644 arch/sh/lib/udivsi3_i4i-Os.S
delete mode 100644 arch/sh/lib/udivsi3_i4i.S
delete mode 100644 arch/sh/math-emu/Makefile
delete mode 100644 arch/sh/math-emu/math.c
delete mode 100644 arch/sh/math-emu/sfp-util.h
delete mode 100644 arch/sh/mm/Kconfig
delete mode 100644 arch/sh/mm/Makefile
delete mode 100644 arch/sh/mm/alignment.c
delete mode 100644 arch/sh/mm/asids-debugfs.c
delete mode 100644 arch/sh/mm/cache-debugfs.c
delete mode 100644 arch/sh/mm/cache-j2.c
delete mode 100644 arch/sh/mm/cache-sh2.c
delete mode 100644 arch/sh/mm/cache-sh2a.c
delete mode 100644 arch/sh/mm/cache-sh3.c
delete mode 100644 arch/sh/mm/cache-sh4.c
delete mode 100644 arch/sh/mm/cache-sh7705.c
delete mode 100644 arch/sh/mm/cache-shx3.c
delete mode 100644 arch/sh/mm/cache.c
delete mode 100644 arch/sh/mm/consistent.c
delete mode 100644 arch/sh/mm/extable_32.c
delete mode 100644 arch/sh/mm/fault.c
delete mode 100644 arch/sh/mm/flush-sh4.c
delete mode 100644 arch/sh/mm/hugetlbpage.c
delete mode 100644 arch/sh/mm/init.c
delete mode 100644 arch/sh/mm/ioremap.c
delete mode 100644 arch/sh/mm/ioremap.h
delete mode 100644 arch/sh/mm/ioremap_fixed.c
delete mode 100644 arch/sh/mm/kmap.c
delete mode 100644 arch/sh/mm/mmap.c
delete mode 100644 arch/sh/mm/nommu.c
delete mode 100644 arch/sh/mm/numa.c
delete mode 100644 arch/sh/mm/pgtable.c
delete mode 100644 arch/sh/mm/pmb.c
delete mode 100644 arch/sh/mm/sram.c
delete mode 100644 arch/sh/mm/tlb-debugfs.c
delete mode 100644 arch/sh/mm/tlb-pteaex.c
delete mode 100644 arch/sh/mm/tlb-sh3.c
delete mode 100644 arch/sh/mm/tlb-sh4.c
delete mode 100644 arch/sh/mm/tlb-urb.c
delete mode 100644 arch/sh/mm/tlbex_32.c
delete mode 100644 arch/sh/mm/tlbflush_32.c
delete mode 100644 arch/sh/mm/uncached.c
delete mode 100644 arch/sh/tools/Makefile
delete mode 100644 arch/sh/tools/gen-mach-types
delete mode 100644 arch/sh/tools/mach-types
delete mode 100644 drivers/video/logo/logo_superh_clut224.ppm
delete mode 100644 drivers/video/logo/logo_superh_vga16.ppm
diff --git a/Documentation/arch.rst b/Documentation/arch.rst
index 41a66a8b38e424..18669458eec4dd 100644
--- a/Documentation/arch.rst
+++ b/Documentation/arch.rst
@@ -22,7 +22,6 @@ implementation.
powerpc/index
riscv/index
s390/index
- sh/index
sparc/index
x86/index
xtensa/index
diff --git a/Documentation/sh/booting.rst b/Documentation/sh/booting.rst
deleted file mode 100644
index d851c49a01bf07..00000000000000
--- a/Documentation/sh/booting.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-DeviceTree Booting
-------------------
-
- Device-tree compatible SH bootloaders are expected to provide the physical
- address of the device tree blob in r4. Since legacy bootloaders did not
- guarantee any particular initial register state, kernels built to
- inter-operate with old bootloaders must either use a builtin DTB or
- select a legacy board option (something other than CONFIG_SH_DEVICE_TREE)
- that does not use device tree. Support for the latter is being phased out
- in favor of device tree.
diff --git a/Documentation/sh/features.rst b/Documentation/sh/features.rst
deleted file mode 100644
index f722af3b6c9934..00000000000000
--- a/Documentation/sh/features.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. kernel-feat:: $srctree/Documentation/features sh
diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
deleted file mode 100644
index c64776738cf6b2..00000000000000
--- a/Documentation/sh/index.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-=======================
-SuperH Interfaces Guide
-=======================
-
-:Author: Paul Mundt
-
-.. toctree::
- :maxdepth: 1
-
- booting
- new-machine
- register-banks
-
- features
-
-Memory Management
-=================
-
-SH-4
-----
-
-Store Queue API
-~~~~~~~~~~~~~~~
-
-.. kernel-doc:: arch/sh/kernel/cpu/sh4/sq.c
- :export:
-
-Machine Specific Interfaces
-===========================
-
-mach-dreamcast
---------------
-
-.. kernel-doc:: arch/sh/boards/mach-dreamcast/rtc.c
- :internal:
-
-mach-x3proto
-------------
-
-.. kernel-doc:: arch/sh/boards/mach-x3proto/ilsel.c
- :export:
-
-Busses
-======
-
-SuperHyway
-----------
-
-.. kernel-doc:: drivers/sh/superhyway/superhyway.c
- :export:
-
-Maple
------
-
-.. kernel-doc:: drivers/sh/maple/maple.c
- :export:
diff --git a/Documentation/sh/new-machine.rst b/Documentation/sh/new-machine.rst
deleted file mode 100644
index e501c52b3b30d2..00000000000000
--- a/Documentation/sh/new-machine.rst
+++ /dev/null
@@ -1,277 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=============================
-Adding a new board to LinuxSH
-=============================
-
- Paul Mundt <lethal@linux-sh.org>
-
-This document attempts to outline what steps are necessary to add support
-for new boards to the LinuxSH port under the new 2.5 and 2.6 kernels. This
-also attempts to outline some of the noticeable changes between the 2.4
-and the 2.5/2.6 SH backend.
-
-1. New Directory Structure
-==========================
-
-The first thing to note is the new directory structure. Under 2.4, most
-of the board-specific code (with the exception of stboards) ended up
-in arch/sh/kernel/ directly, with board-specific headers ending up in
-include/asm-sh/. For the new kernel, things are broken out by board type,
-companion chip type, and CPU type. Looking at a tree view of this directory
-hierarchy looks like the following:
-
-Board-specific code::
-
- .
- |-- arch
- | `-- sh
- | `-- boards
- | |-- adx
- | | `-- board-specific files
- | |-- bigsur
- | | `-- board-specific files
- | |
- | ... more boards here ...
- |
- `-- include
- `-- asm-sh
- |-- adx
- | `-- board-specific headers
- |-- bigsur
- | `-- board-specific headers
- |
- .. more boards here ...
-
-Next, for companion chips::
-
- .
- `-- arch
- `-- sh
- `-- cchips
- `-- hd6446x
- `-- hd64461
- `-- cchip-specific files
-
-... and so on. Headers for the companion chips are treated the same way as
-board-specific headers. Thus, include/asm-sh/hd64461 is home to all of the
-hd64461-specific headers.
-
-Finally, CPU family support is also abstracted::
-
- .
- |-- arch
- | `-- sh
- | |-- kernel
- | | `-- cpu
- | | |-- sh2
- | | | `-- SH-2 generic files
- | | |-- sh3
- | | | `-- SH-3 generic files
- | | `-- sh4
- | | `-- SH-4 generic files
- | `-- mm
- | `-- This is also broken out per CPU family, so each family can
- | have their own set of cache/tlb functions.
- |
- `-- include
- `-- asm-sh
- |-- cpu-sh2
- | `-- SH-2 specific headers
- |-- cpu-sh3
- | `-- SH-3 specific headers
- `-- cpu-sh4
- `-- SH-4 specific headers
-
-It should be noted that CPU subtypes are _not_ abstracted. Thus, these still
-need to be dealt with by the CPU family specific code.
-
-2. Adding a New Board
-=====================
-
-The first thing to determine is whether the board you are adding will be
-isolated, or whether it will be part of a family of boards that can mostly
-share the same board-specific code with minor differences.
-
-In the first case, this is just a matter of making a directory for your
-board in arch/sh/boards/ and adding rules to hook your board in with the
-build system (more on this in the next section). However, for board families
-it makes more sense to have a common top-level arch/sh/boards/ directory
-and then populate that with sub-directories for each member of the family.
-Both the Solution Engine and the hp6xx boards are an example of this.
-
-After you have setup your new arch/sh/boards/ directory, remember that you
-should also add a directory in include/asm-sh for headers localized to this
-board (if there are going to be more than one). In order to interoperate
-seamlessly with the build system, it's best to have this directory the same
-as the arch/sh/boards/ directory name, though if your board is again part of
-a family, the build system has ways of dealing with this (via incdir-y
-overloading), and you can feel free to name the directory after the family
-member itself.
-
-There are a few things that each board is required to have, both in the
-arch/sh/boards and the include/asm-sh/ hierarchy. In order to better
-explain this, we use some examples for adding an imaginary board. For
-setup code, we're required at the very least to provide definitions for
-get_system_type() and platform_setup(). For our imaginary board, this
-might look something like::
-
- /*
- * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
- */
- #include <linux/init.h>
-
- const char *get_system_type(void)
- {
- return "FooTech Vaporboard";
- }
-
- int __init platform_setup(void)
- {
- /*
- * If our hardware actually existed, we would do real
- * setup here. Though it's also sane to leave this empty
- * if there's no real init work that has to be done for
- * this board.
- */
-
- /* Start-up imaginary PCI ... */
-
- /* And whatever else ... */
-
- return 0;
- }
-
-Our new imaginary board will also have to tie into the machvec in order for it
-to be of any use.
-
-machvec functions fall into a number of categories:
-
- - I/O functions to IO memory (inb etc) and PCI/main memory (readb etc).
- - I/O mapping functions (ioport_map, ioport_unmap, etc).
- - a 'heartbeat' function.
- - PCI and IRQ initialization routines.
- - Consistent allocators (for boards that need special allocators,
- particularly for allocating out of some board-specific SRAM for DMA
- handles).
-
-There are machvec functions added and removed over time, so always be sure to
-consult include/asm-sh/machvec.h for the current state of the machvec.
-
-The kernel will automatically wrap in generic routines for undefined function
-pointers in the machvec at boot time, as machvec functions are referenced
-unconditionally throughout most of the tree. Some boards have incredibly
-sparse machvecs (such as the dreamcast and sh03), whereas others must define
-virtually everything (rts7751r2d).
-
-Adding a new machine is relatively trivial (using vapor as an example):
-
-If the board-specific definitions are quite minimalistic, as is the case for
-the vast majority of boards, simply having a single board-specific header is
-sufficient.
-
- - add a new file include/asm-sh/vapor.h which contains prototypes for
- any machine specific IO functions prefixed with the machine name, for
- example vapor_inb. These will be needed when filling out the machine
- vector.
-
- Note that these prototypes are generated automatically by setting
- __IO_PREFIX to something sensible. A typical example would be::
-
- #define __IO_PREFIX vapor
- #include <asm/io_generic.h>
-
- somewhere in the board-specific header. Any boards being ported that still
- have a legacy io.h should remove it entirely and switch to the new model.
-
- - Add machine vector definitions to the board's setup.c. At a bare minimum,
- this must be defined as something like::
-
- struct sh_machine_vector mv_vapor __initmv = {
- .mv_name = "vapor",
- };
- ALIAS_MV(vapor)
-
- - finally add a file arch/sh/boards/vapor/io.c, which contains definitions of
- the machine specific io functions (if there are enough to warrant it).
-
-3. Hooking into the Build System
-================================
-
-Now that we have the corresponding directories setup, and all of the
-board-specific code is in place, it's time to look at how to get the
-whole mess to fit into the build system.
-
-Large portions of the build system are now entirely dynamic, and merely
-require the proper entry here and there in order to get things done.
-
-The first thing to do is to add an entry to arch/sh/Kconfig, under the
-"System type" menu::
-
- config SH_VAPOR
- bool "Vapor"
- help
- select Vapor if configuring for a FooTech Vaporboard.
-
-next, this has to be added into arch/sh/Makefile. All boards require a
-machdir-y entry in order to be built. This entry needs to be the name of
-the board directory as it appears in arch/sh/boards, even if it is in a
-sub-directory (in which case, all parent directories below arch/sh/boards/
-need to be listed). For our new board, this entry can look like::
-
- machdir-$(CONFIG_SH_VAPOR) += vapor
-
-provided that we've placed everything in the arch/sh/boards/vapor/ directory.
-
-Next, the build system assumes that your include/asm-sh directory will also
-be named the same. If this is not the case (as is the case with multiple
-boards belonging to a common family), then the directory name needs to be
-implicitly appended to incdir-y. The existing code manages this for the
-Solution Engine and hp6xx boards, so see these for an example.
-
-Once that is taken care of, it's time to add an entry for the mach type.
-This is done by adding an entry to the end of the arch/sh/tools/mach-types
-list. The method for doing this is self explanatory, and so we won't waste
-space restating it here. After this is done, you will be able to use
-implicit checks for your board if you need this somewhere throughout the
-common code, such as::
-
- /* Make sure we're on the FooTech Vaporboard */
- if (!mach_is_vapor())
- return -ENODEV;
-
-also note that the mach_is_boardname() check will be implicitly forced to
-lowercase, regardless of the fact that the mach-types entries are all
-uppercase. You can read the script if you really care, but it's pretty ugly,
-so you probably don't want to do that.
-
-Now all that's left to do is providing a defconfig for your new board. This
-way, other people who end up with this board can simply use this config
-for reference instead of trying to guess what settings are supposed to be
-used on it.
-
-Also, as soon as you have copied over a sample .config for your new board
-(assume arch/sh/configs/vapor_defconfig), you can also use this directly as a
-build target, and it will be implicitly listed as such in the help text.
-
-Looking at the 'make help' output, you should now see something like:
-
-Architecture specific targets (sh):
-
- ======================= =============================================
- zImage Compressed kernel image (arch/sh/boot/zImage)
- adx_defconfig Build for adx
- cqreek_defconfig Build for cqreek
- dreamcast_defconfig Build for dreamcast
- ...
- vapor_defconfig Build for vapor
- ======================= =============================================
-
-which then allows you to do::
-
- $ make ARCH=sh CROSS_COMPILE=sh4-linux- vapor_defconfig vmlinux
-
-which will in turn copy the defconfig for this board, run it through
-oldconfig (prompting you for any new options since the time of creation),
-and start you on your way to having a functional kernel for your new
-board.
diff --git a/Documentation/sh/register-banks.rst b/Documentation/sh/register-banks.rst
deleted file mode 100644
index 2bef5c8fcbbc06..00000000000000
--- a/Documentation/sh/register-banks.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================================
-Notes on register bank usage in the kernel
-==========================================
-
-Introduction
-------------
-
-The SH-3 and SH-4 CPU families traditionally include a single partial register
-bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
-may have more full-featured banking or simply no such capabilities at all.
-
-SR.RB banking
--------------
-
-In the case of this type of banking, banked registers are mapped directly to
-r0 ... r7 if SR.RB is set to the bank we are interested in, otherwise ldc/stc
-can still be used to reference the banked registers (as r0_bank ... r7_bank)
-when in the context of another bank. The developer must keep the SR.RB value
-in mind when writing code that utilizes these banked registers, for obvious
-reasons. Userspace is also not able to poke at the bank1 values, so these can
-be used rather effectively as scratch registers by the kernel.
-
-Presently the kernel uses several of these registers.
-
- - r0_bank, r1_bank (referenced as k0 and k1, used for scratch
- registers when doing exception handling).
-
- - r2_bank (used to track the EXPEVT/INTEVT code)
-
- - Used by do_IRQ() and friends for doing irq mapping based off
- of the interrupt exception vector jump table offset
-
- - r6_bank (global interrupt mask)
-
- - The SR.IMASK interrupt handler makes use of this to set the
- interrupt priority level (used by local_irq_enable())
-
- - r7_bank (current)
diff --git a/MAINTAINERS b/MAINTAINERS
index e278cd5d0de00e..5899ff135e3deb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20067,16 +20067,6 @@ S: Maintained
F: Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
F: drivers/watchdog/sunplus_wdt.c
-SUPERH
-M: Yoshinori Sato <ysato@users.sourceforge.jp>
-M: Rich Felker <dalias@libc.org>
-L: linux-sh@vger.kernel.org
-S: Maintained
-Q: http://patchwork.kernel.org/project/linux-sh/list/
-F: Documentation/sh/
-F: arch/sh/
-F: drivers/sh/
-
SUSPEND TO RAM
M: "Rafael J. Wysocki" <rafael@kernel.org>
M: Len Brown <len.brown@intel.com>
diff --git a/arch/sh/Kbuild b/arch/sh/Kbuild
deleted file mode 100644
index be171880977e5d..00000000000000
--- a/arch/sh/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += kernel/ mm/ boards/
-obj-$(CONFIG_SH_FPU_EMU) += math-emu/
-obj-$(CONFIG_USE_BUILTIN_DTB) += boot/dts/
-
-# for cleaning
-subdir- += boot
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
deleted file mode 100644
index 0665ac0add0b49..00000000000000
--- a/arch/sh/Kconfig
+++ /dev/null
@@ -1,793 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config SUPERH
- def_bool y
- select ARCH_32BIT_OFF_T
- select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
- select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
- select ARCH_HAVE_CUSTOM_GPIO_H
- select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
- select ARCH_HAS_BINFMT_FLAT if !MMU
- select ARCH_HAS_CURRENT_STACK_POINTER
- select ARCH_HAS_GIGANTIC_PAGE
- select ARCH_HAS_GCOV_PROFILE_ALL
- select ARCH_HAS_PTE_SPECIAL
- select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- select ARCH_HIBERNATION_POSSIBLE if MMU
- select ARCH_MIGHT_HAVE_PC_PARPORT
- select ARCH_WANT_IPC_PARSE_VERSION
- select CPU_NO_EFFICIENT_FFS
- select DMA_DECLARE_COHERENT
- select GENERIC_ATOMIC64
- select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
- select GENERIC_IDLE_POLL_SETUP
- select GENERIC_IRQ_SHOW
- select GENERIC_PCI_IOMAP if PCI
- select GENERIC_SCHED_CLOCK
- select GENERIC_SMP_IDLE_THREAD
- select GUP_GET_PXX_LOW_HIGH if X2TLB
- select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_KGDB
- select HAVE_ARCH_SECCOMP_FILTER
- select HAVE_ARCH_TRACEHOOK
- select HAVE_DEBUG_BUGVERBOSE
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FAST_GUP if MMU
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_FUNCTION_TRACER
- select HAVE_FTRACE_MCOUNT_RECORD
- select HAVE_HW_BREAKPOINT
- select HAVE_IOREMAP_PROT if MMU && !X2TLB
- select HAVE_KERNEL_BZIP2
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_LZMA
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_XZ
- select HAVE_KPROBES
- select HAVE_KRETPROBES
- select HAVE_MIXED_BREAKPOINTS_REGS
- select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
- select HAVE_NMI
- select HAVE_PATA_PLATFORM
- select HAVE_PERF_EVENTS
- select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_UID16
- select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
- select HAVE_STACKPROTECTOR
- select HAVE_SYSCALL_TRACEPOINTS
- select IRQ_FORCED_THREADING
- select MODULES_USE_ELF_RELA
- select NEED_SG_DMA_LENGTH
- select NO_DMA if !MMU && !DMA_COHERENT
- select NO_GENERIC_PCI_IOPORT_MAP if PCI
- select OLD_SIGACTION
- select OLD_SIGSUSPEND
- select PCI_DOMAINS if PCI
- select PERF_EVENTS
- select PERF_USE_VMALLOC
- select RTC_LIB
- select SPARSE_IRQ
- select TRACE_IRQFLAGS_SUPPORT
- help
- The SuperH is a RISC processor targeted for use in embedded systems
- and consumer electronics; it was also used in the Sega Dreamcast
- gaming console. The SuperH port has a home page at
- <http://www.linux-sh.org/>.
-
-config GENERIC_BUG
- def_bool y
- depends on BUG
-
-config GENERIC_HWEIGHT
- def_bool y
-
-config GENERIC_CALIBRATE_DELAY
- bool
-
-config GENERIC_LOCKBREAK
- def_bool y
- depends on SMP && PREEMPTION
-
-config ARCH_SUSPEND_POSSIBLE
- def_bool n
-
-config ARCH_HIBERNATION_POSSIBLE
- def_bool n
-
-config SYS_SUPPORTS_APM_EMULATION
- bool
- select ARCH_SUSPEND_POSSIBLE
-
-config SYS_SUPPORTS_SMP
- bool
-
-config SYS_SUPPORTS_NUMA
- bool
-
-config STACKTRACE_SUPPORT
- def_bool y
-
-config LOCKDEP_SUPPORT
- def_bool y
-
-config ARCH_HAS_ILOG2_U32
- def_bool n
-
-config ARCH_HAS_ILOG2_U64
- def_bool n
-
-config NO_IOPORT_MAP
- def_bool !PCI
- depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
- !SH_SOLUTION_ENGINE
-
-config IO_TRAPPED
- bool
-
-config SWAP_IO_SPACE
- bool
-
-config DMA_COHERENT
- bool
-
-config DMA_NONCOHERENT
- def_bool !NO_DMA && !DMA_COHERENT
- select ARCH_HAS_DMA_PREP_COHERENT
- select ARCH_HAS_SYNC_DMA_FOR_DEVICE
- select DMA_DIRECT_REMAP
-
-config PGTABLE_LEVELS
- default 3 if X2TLB
- default 2
-
-menu "System type"
-
-#
-# Processor families
-#
-config CPU_SH2
- bool
- select SH_INTC
-
-config CPU_SH2A
- bool
- select CPU_SH2
- select UNCACHED_MAPPING
-
-config CPU_J2
- bool
- select CPU_SH2
- select OF
- select OF_EARLY_FLATTREE
-
-config CPU_SH3
- bool
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4
- bool
- select ARCH_SUPPORTS_HUGETLBFS if MMU
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4A
- bool
- select CPU_SH4
-
-config CPU_SH4AL_DSP
- bool
- select CPU_SH4A
- select CPU_HAS_DSP
-
-config CPU_SHX2
- bool
-
-config CPU_SHX3
- bool
- select DMA_COHERENT
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_NUMA
-
-config ARCH_SHMOBILE
- bool
- select ARCH_SUSPEND_POSSIBLE
- select PM
-
-config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
-
-choice
- prompt "Processor sub-type selection"
-
-#
-# Processor subtypes
-#
-
-# SH-2 Processor Support
-
-config CPU_SUBTYPE_SH7619
- bool "Support SH7619 processor"
- select CPU_SH2
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_J2
- bool "Support J2 processor"
- select CPU_J2
- select SYS_SUPPORTS_SMP
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-
-# SH-2A Processor Support
-
-config CPU_SUBTYPE_SH7201
- bool "Support SH7201 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7203
- bool "Support SH7203 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7206
- bool "Support SH7206 processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7263
- bool "Support SH7263 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7264
- bool "Support SH7264 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7269
- bool "Support SH7269 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_MXG
- bool "Support MX-G processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_MTU2
- help
- Select MX-G if running on an R8A03022BG part.
-
-# SH-3 Processor Support
-
-config CPU_SUBTYPE_SH7705
- bool "Support SH7705 processor"
- select CPU_SH3
-
-config CPU_SUBTYPE_SH7706
- bool "Support SH7706 processor"
- select CPU_SH3
- help
- Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
-
-config CPU_SUBTYPE_SH7707
- bool "Support SH7707 processor"
- select CPU_SH3
- help
- Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
-
-config CPU_SUBTYPE_SH7708
- bool "Support SH7708 processor"
- select CPU_SH3
- help
- Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
- if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-config CPU_SUBTYPE_SH7709
- bool "Support SH7709 processor"
- select CPU_SH3
- help
- Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
-
-config CPU_SUBTYPE_SH7710
- bool "Support SH7710 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7710 if you have a SH3-DSP SH7710 CPU.
-
-config CPU_SUBTYPE_SH7712
- bool "Support SH7712 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7712 if you have a SH3-DSP SH7712 CPU.
-
-config CPU_SUBTYPE_SH7720
- bool "Support SH7720 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- select PINCTRL
- help
- Select SH7720 if you have a SH3-DSP SH7720 CPU.
-
-config CPU_SUBTYPE_SH7721
- bool "Support SH7721 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7721 if you have a SH3-DSP SH7721 CPU.
-
-# SH-4 Processor Support
-
-config CPU_SUBTYPE_SH7750
- bool "Support SH7750 processor"
- select CPU_SH4
- help
- Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-config CPU_SUBTYPE_SH7091
- bool "Support SH7091 processor"
- select CPU_SH4
- help
- Select SH7091 if you have an SH-4 based Sega device (such as
- the Dreamcast, Naomi, and Naomi 2).
-
-config CPU_SUBTYPE_SH7750R
- bool "Support SH7750R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7750S
- bool "Support SH7750S processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7751
- bool "Support SH7751 processor"
- select CPU_SH4
- help
- Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
- or if you have a HD6417751R CPU.
-
-config CPU_SUBTYPE_SH7751R
- bool "Support SH7751R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7760
- bool "Support SH7760 processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH4_202
- bool "Support SH4-202 processor"
- select CPU_SH4
-
-# SH-4A Processor Support
-
-config CPU_SUBTYPE_SH7723
- bool "Support SH7723 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7723 if you have an SH-MobileR2 CPU.
-
-config CPU_SUBTYPE_SH7724
- bool "Support SH7724 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7724 if you have an SH-MobileR2R CPU.
-
-config CPU_SUBTYPE_SH7734
- bool "Support SH7734 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7734 if you have a SH4A SH7734 CPU.
-
-config CPU_SUBTYPE_SH7757
- bool "Support SH7757 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7757 if you have a SH4A SH7757 CPU.
-
-config CPU_SUBTYPE_SH7763
- bool "Support SH7763 processor"
- select CPU_SH4A
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
-
-config CPU_SUBTYPE_SH7770
- bool "Support SH7770 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7780
- bool "Support SH7780 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7785
- bool "Support SH7785 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select PINCTRL
-
-config CPU_SUBTYPE_SH7786
- bool "Support SH7786 processor"
- select CPU_SH4A
- select CPU_SHX3
- select CPU_HAS_PTEAEX
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select USB_OHCI_SH if USB_OHCI_HCD
- select USB_EHCI_SH if USB_EHCI_HCD
- select PINCTRL
-
-config CPU_SUBTYPE_SHX3
- bool "Support SH-X3 processor"
- select CPU_SH4A
- select CPU_SHX3
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select GPIOLIB
- select PINCTRL
-
-# SH4AL-DSP Processor Support
-
-config CPU_SUBTYPE_SH7343
- bool "Support SH7343 processor"
- select CPU_SH4AL_DSP
- select ARCH_SHMOBILE
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_SH7722
- bool "Support SH7722 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
-
-config CPU_SUBTYPE_SH7366
- bool "Support SH7366 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
-
-endchoice
-
-source "arch/sh/mm/Kconfig"
-
-source "arch/sh/Kconfig.cpu"
-
-source "arch/sh/boards/Kconfig"
-
-menu "Timer and clock configuration"
-
-config SH_PCLK_FREQ
- int "Peripheral clock frequency (in Hz)"
- depends on SH_CLK_CPG_LEGACY
- default "31250000" if CPU_SUBTYPE_SH7619
- default "33333333" if CPU_SUBTYPE_SH7770 || \
- CPU_SUBTYPE_SH7760 || \
- CPU_SUBTYPE_SH7705 || \
- CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || \
- CPU_SUBTYPE_MXG
- default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
- default "66000000" if CPU_SUBTYPE_SH4_202
- default "50000000"
- help
- This option is used to specify the peripheral clock frequency.
- This is necessary for determining the reference clock value on
- platforms lacking an RTC.
-
-config SH_CLK_CPG
- def_bool y
-
-config SH_CLK_CPG_LEGACY
- depends on SH_CLK_CPG
- def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
- !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
- !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
- !CPU_SUBTYPE_SH7269
-
-endmenu
-
-menu "CPU Frequency scaling"
-source "drivers/cpufreq/Kconfig"
-endmenu
-
-source "arch/sh/drivers/Kconfig"
-
-endmenu
-
-menu "Kernel features"
-
-source "kernel/Kconfig.hz"
-
-config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on MMU
- select KEXEC_CORE
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. As of this writing the exact hardware
- interface is strongly in flux, so no good recommendation can be
- made.
-
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on BROKEN_ON_SMP
- help
- Generate crash dump after being started by kexec.
- This should be normally only set in special crash dump kernels
- which are loaded in the main kernel with kexec-tools into
- a specially reserved region and then later executed after
- a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel using
- PHYSICAL_START.
-
- For more details see Documentation/admin-guide/kdump/kdump.rst
-
-config KEXEC_JUMP
- bool "kexec jump (EXPERIMENTAL)"
- depends on KEXEC && HIBERNATION
- help
- Jump between original kernel and kexeced kernel and invoke
- code via KEXEC
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
- default MEMORY_START
- help
- This gives the physical address where the kernel is loaded
- and is ordinarily the same as MEMORY_START.
-
- Different values are primarily used in the case of kexec on panic
- where the fail safe kernel needs to run at a different address
- than the panic-ed kernel.
-
-config SMP
- bool "Symmetric multi-processing support"
- depends on SYS_SUPPORTS_SMP
- help
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y.
-
- If you say N here, the kernel will run on uni- and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- uniprocessor machines. On a uniprocessor machine, the kernel
- will run faster if you say N here.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below.
-
- See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
- available at <https://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
- depends on SMP
- default "4" if CPU_SUBTYPE_SHX3
- default "2"
- help
- This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 32 and the
- minimum value which makes sense is 2.
-
- This is purely to save memory - each supported CPU adds
- approximately eight kilobytes to the kernel image.
-
-config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP
- help
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
-
-config GUSA
- def_bool y
- depends on !SMP
- help
- This enables support for gUSA (general UserSpace Atomicity).
- This is the default implementation for both UP and non-ll/sc
- CPUs, and is used by the libc, amongst others.
-
- For additional information, design information can be found
- in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
-
- This should only be disabled for special cases where alternate
- atomicity implementations exist.
-
-config GUSA_RB
- bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
- depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
- help
- Enabling this option will allow the kernel to implement some
- atomic operations using a software implementation of load-locked/
- store-conditional (LLSC). On machines which do not have hardware
- LLSC, this should be more efficient than the other alternative of
- disabling interrupts around the atomic sequence.
-
-config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU
- default y
- help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
-
-source "drivers/sh/Kconfig"
-
-endmenu
-
-menu "Boot options"
-
-config USE_BUILTIN_DTB
- bool "Use builtin DTB"
- default n
- depends on SH_DEVICE_TREE
- help
- Link a device tree blob for particular hardware into the kernel,
- suppressing use of the DTB pointer provided by the bootloader.
- This option should only be used with legacy bootloaders that are
- not capable of providing a DTB to the kernel, or for experimental
- hardware without stable device tree bindings.
-
-config BUILTIN_DTB_SOURCE
- string "Source file for builtin DTB"
- default ""
- depends on USE_BUILTIN_DTB
- help
- Base name (without suffix, relative to arch/sh/boot/dts) for the
- a DTS file that will be used to produce the DTB linked into the
- kernel.
-
-config ZERO_PAGE_OFFSET
- hex
- default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
- SH_7751_SOLUTION_ENGINE
- default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00001000"
- help
- This sets the default offset of zero page.
-
-config BOOT_LINK_OFFSET
- hex
- default "0x00210000" if SH_SHMIN
- default "0x00810000" if SH_7780_SOLUTION_ENGINE
- default "0x009e0000" if SH_TITAN
- default "0x01800000" if SH_SDK7780
- default "0x02000000" if SH_EDOSK7760
- default "0x00800000"
- help
- This option allows you to set the link address offset of the zImage.
- This can be useful if you are on a board which has a small amount of
- memory.
-
-config ENTRY_OFFSET
- hex
- default "0x00001000" if PAGE_SIZE_4KB
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00004000" if PAGE_SIZE_16KB
- default "0x00010000" if PAGE_SIZE_64KB
- default "0x00000000"
-
-config ROMIMAGE_MMCIF
- bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
- depends on CPU_SUBTYPE_SH7724
- help
- Say Y here to include experimental MMCIF loading code in
- romImage. With this enabled it is possible to write the romImage
- kernel image to an MMC card and boot the kernel straight from
- the reset vector. At reset the processor Mask ROM will load the
- first part of the romImage which in turn loads the rest the kernel
- image to RAM using the MMCIF hardware block.
-
-choice
- prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- help
- Setting this option allows the kernel command line arguments
- to be set.
-
-config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
- help
- Given string will overwrite any arguments passed in by
- a bootloader.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- Given string will be concatenated with arguments passed in
- by a bootloader.
-
-endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
-endmenu
-
-menu "Bus options"
-
-config SUPERHYWAY
- tristate "SuperHyway Bus support"
- depends on CPU_SUBTYPE_SH4_202
-
-config MAPLE
- bool "Maple Bus support"
- depends on SH_DREAMCAST
- help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
-
-endmenu
-
-menu "Power management options (EXPERIMENTAL)"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
deleted file mode 100644
index fff419f3d7574c..00000000000000
--- a/arch/sh/Kconfig.cpu
+++ /dev/null
@@ -1,100 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Processor features"
-
-choice
- prompt "Endianness selection"
- default CPU_LITTLE_ENDIAN
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
-
-config CPU_BIG_ENDIAN
- bool "Big Endian"
-
-endchoice
-
-config SH_FPU
- def_bool y
- prompt "FPU support"
- depends on CPU_HAS_FPU
- help
- Selecting this option will enable support for SH processors that
- have FPU units (ie, SH77xx).
-
- This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
- def_bool n
- prompt "FPU emulation support"
- depends on !SH_FPU
- help
- Selecting this option will enable support for software FPU emulation.
- Most SH-3 users will want to say Y here, whereas most SH-4 users will
- want to say N.
-
-config SH_DSP
- def_bool y
- prompt "DSP support"
- depends on CPU_HAS_DSP
- help
- Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
- This option must be set in order to enable the DSP.
-
-config SH_ADC
- def_bool y
- prompt "ADC support"
- depends on CPU_SH3
- help
- Selecting this option will allow the Linux kernel to use SH3 on-chip
- ADC module.
-
- If unsure, say N.
-
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
- help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
- bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
- help
- This enables support for a speculative instruction fetch for
- subroutine return. There are various pitfalls associated with
- this, as outlined in the SH7780 hardware manual.
-
- If unsure, say N.
-
-config CPU_HAS_INTEVT
- bool
-
-config CPU_HAS_IPR_IRQ
- bool
-
-config CPU_HAS_SR_RB
- bool
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.rst> for further
- information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEAEX
- bool
-
-config CPU_HAS_DSP
- bool
-
-config CPU_HAS_FPU
- bool
-
-endmenu
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
deleted file mode 100644
index 10290e5c1f4387..00000000000000
--- a/arch/sh/Kconfig.debug
+++ /dev/null
@@ -1,78 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config SH_STANDARD_BIOS
- bool "Use LinuxSH standard BIOS"
- help
- Say Y here if your target has the gdb-sh-stub
- package from www.m17n.org (or any conforming standard LinuxSH BIOS)
- in FLASH or EPROM. The kernel will use standard BIOS calls during
- boot for various housekeeping tasks (including calls to read and
- write characters to a system console, get a MAC address from an
- on-board Ethernet interface, and shut down the hardware). Note this
- does not work with machines with an existing operating system in
- mask ROM and no flash (WindowsCE machines fall in this category).
- If unsure, say N.
-
-config STACK_DEBUG
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit. Saying Y here will add overhead to
- every function call and will therefore incur a major
- performance hit. Most users should say N.
-
-config 4KSTACKS
- bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
- help
- If you say Y here the kernel will use a 4Kb stacksize for the
- kernel stack attached to each process/thread. This facilitates
- running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- depends on DEBUG_KERNEL && BROKEN
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-config DUMP_CODE
- bool "Show disassembly of nearby code in register dumps"
- depends on DEBUG_KERNEL
- default y if DEBUG_BUGVERBOSE
- default n
- help
- This prints out a code trace of the instructions leading up to
- the faulting instruction as a debugging aid. As this does grow
- the kernel in size a bit, most users will want to say N here.
-
- Those looking for more verbose debugging output should say Y.
-
-config DWARF_UNWINDER
- bool "Enable the DWARF unwinder for stacktraces"
- depends on DEBUG_KERNEL
- select FRAME_POINTER
- default n
- help
- Enabling this option will make stacktraces more accurate, at
- the cost of an increase in overall kernel size.
-
-config SH_NO_BSS_INIT
- bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
- depends on DEBUG_KERNEL
- default n
- help
- If running in painfully slow environments, such as an RTL
- simulation or from remote memory via SHdebug, where the memory
- can already be guaranteed to ber zeroed on boot, say Y.
-
- For all other cases, say N. If this option seems perplexing, or
- you aren't sure, say N.
-
-config MCOUNT
- def_bool y
- depends on STACK_DEBUG || FUNCTION_TRACER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
deleted file mode 100644
index 5c8776482530c3..00000000000000
--- a/arch/sh/Makefile
+++ /dev/null
@@ -1,215 +0,0 @@
-#
-# arch/sh/Makefile
-#
-# Copyright (C) 1999 Kaz Kojima
-# Copyright (C) 2002 - 2008 Paul Mundt
-# Copyright (C) 2002 M. R. Brown
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-ifdef cross_compiling
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
- endif
-endif
-
-KBUILD_DEFCONFIG := shx3_defconfig
-
-isa-y := any
-isa-$(CONFIG_SH_DSP) := sh
-isa-$(CONFIG_CPU_SH2) := sh2
-isa-$(CONFIG_CPU_SH2A) := sh2a
-isa-$(CONFIG_CPU_SH3) := sh3
-isa-$(CONFIG_CPU_SH4) := sh4
-isa-$(CONFIG_CPU_SH4A) := sh4a
-isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
-
-isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
-isa-y := $(isa-y)-up
-
-cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
-cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,)
-cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
- $(call cc-option,-m2a-nofpu,) \
- $(call cc-option,-m4-nofpu,)
-cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,)
-cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
- $(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
- $(call cc-option,-m4a-nofpu,)
-cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,)
-
-ifeq ($(cflags-y),)
-#
-# In the case where we are stuck with a compiler that has been uselessly
-# restricted to a particular ISA, a favourite default of newer GCCs when
-# extensive multilib targets are not provided, ensure we get the best fit
-# regarding FP generation. This is intentionally stupid (albeit many
-# orders of magnitude less than GCC's default behaviour), as anything
-# with a large number of multilib targets better have been built
-# correctly for the target in mind.
-#
-cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
- grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
-# At this point, anything goes.
-isaflags-y := $(call as-option,-Wa$(comma)-isa=any,)
-else
-#
-# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
-# support it, while -Wa,-dsp by itself limits the range of usable opcodes
-# on certain CPU subtypes. Try the ISA variant first, and if that fails,
-# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
-# opcodes, we always want the best ISA tuning the version of binutils
-# will provide.
-#
-isaflags-y := $(call as-option,-Wa$(comma)-isa=$(isa-y),)
-
-isaflags-$(CONFIG_SH_DSP) := \
- $(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
-endif
-
-cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
-
-cflags-y += $(call cc-option,-mno-fdpic)
-cflags-y += $(isaflags-y) -ffreestanding
-
-OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
- -R .stab -R .stabstr -S
-
-# Give the various platforms the opportunity to set default image types
-defaultimage-y := zImage
-defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
-defaultimage-$(CONFIG_SH_RSK) := uImage
-defaultimage-$(CONFIG_SH_URQUELL) := uImage
-defaultimage-$(CONFIG_SH_MIGOR) := uImage
-defaultimage-$(CONFIG_SH_AP325RXA) := uImage
-defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
-defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
-defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
-defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
-
-# Set some sensible Kbuild defaults
-boot := arch/sh/boot
-KBUILD_IMAGE := $(boot)/$(defaultimage-y)
-
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking.
-#
-UTS_MACHINE := sh
-LDFLAGS_vmlinux += -e _stext
-
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-ld-bfd := elf32-sh-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EL
-else
-ld-bfd := elf32-shbig-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EB
-endif
-
-export ld-bfd
-
-# Mach groups
-machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
-machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
-machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
-machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
-machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
-machdir-$(CONFIG_SH_MIGOR) += mach-migor
-machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
-machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
-machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
-machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
-machdir-$(CONFIG_SH_SDK7786) += mach-sdk7786
-machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
-machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
-machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
-machdir-$(CONFIG_SH_LANDISK) += mach-landisk
-machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
-machdir-$(CONFIG_SH_RSK) += mach-rsk
-
-ifneq ($(machdir-y),)
-core-y += $(addprefix arch/sh/boards/, \
- $(filter-out ., $(patsubst %,%/,$(machdir-y))))
-endif
-
-# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
-machdir-y += mach-common
-
-# Companion chips
-core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-
-#
-# CPU header paths
-#
-# These are ordered by optimization level. A CPU family that is a subset
-# of another (ie, SH-2A / SH-2), is picked up first, with increasing
-# levels of genericness if nothing more suitable is situated in the
-# hierarchy.
-#
-# As an example, in order of preference, SH-2A > SH-2 > common definitions.
-#
-cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a
-cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
-cpuincdir-y += cpu-common # Must be last
-
-drivers-y += arch/sh/drivers/
-
-cflags-y += $(foreach d, $(cpuincdir-y), -I $(srctree)/arch/sh/include/$(d)) \
- $(foreach d, $(machdir-y), -I $(srctree)/arch/sh/include/$(d))
-
-KBUILD_CFLAGS += -pipe $(cflags-y)
-KBUILD_CPPFLAGS += $(cflags-y)
-KBUILD_AFLAGS += $(cflags-y)
-
-ifeq ($(CONFIG_MCOUNT),y)
- KBUILD_CFLAGS += -pg
-endif
-
-ifeq ($(CONFIG_DWARF_UNWINDER),y)
- KBUILD_CFLAGS += -fasynchronous-unwind-tables
-endif
-
-libs-y := arch/sh/lib/ $(libs-y)
-
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
- uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
- romImage
-PHONY += $(BOOT_TARGETS)
-
-all: $(notdir $(KBUILD_IMAGE))
-
-$(BOOT_TARGETS): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-compressed: zImage
-
-archprepare:
- $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h
-
-archheaders:
- $(Q)$(MAKE) $(build)=arch/sh/kernel/syscalls all
-
-define archhelp
- @echo ' zImage - Compressed kernel image'
- @echo ' romImage - Compressed ROM image, if supported'
- @echo ' vmlinux.srec - Create an ELF S-record'
- @echo ' vmlinux.bin - Create an uncompressed binary image'
- @echo '* uImage - Alias to bootable U-Boot image'
- @echo ' uImage.srec - Create an S-record for U-Boot'
- @echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
- @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
- @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
- @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
- @echo ' uImage.xz - Kernel-only image for U-Boot (xz)'
- @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
-endef
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
deleted file mode 100644
index 83bcb6d2dacadd..00000000000000
--- a/arch/sh/boards/Kconfig
+++ /dev/null
@@ -1,400 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_ALPHA_BOARD
- bool
-
-config SH_CUSTOM_CLK
- def_bool y
- depends on !SH_DEVICE_TREE
- select HAVE_LEGACY_CLK
-
-config SH_DEVICE_TREE
- bool
- select OF
- select OF_EARLY_FLATTREE
- select TIMER_OF
- select COMMON_CLK
- select GENERIC_CALIBRATE_DELAY
-
-config SH_JCORE_SOC
- bool "J-Core SoC"
- select SH_DEVICE_TREE
- select CLKSRC_JCORE_PIT
- select JCORE_AIC
- depends on CPU_J2
- help
- Select this option to include drivers core components of the
- J-Core SoC, including interrupt controllers and timers.
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7724_SOLUTION_ENGINE
- bool "SolutionEngine7724"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select 7724 SolutionEngine if configuring for a Hitachi SH7724
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- select IO_TRAPPED if MMU
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK
- bool "Renesas Starter Kit"
- depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select HAVE_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_SDK7786
- bool "SDK7786"
- depends on CPU_SUBTYPE_SH7786
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
- select HAVE_SRAM_POOL
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select SDK7786 if configuring for a Renesas Technology Europe
- SH7786-65nm board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select HAVE_PCI
- select IO_TRAPPED if MMU
-
-config SH_SH7757LCR
- bool "SH7757LCR"
- depends on CPU_SUBTYPE_SH7757
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select HAVE_PCI
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR && 29BIT
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_SH7785LCR_PT
- bool "SH7785LCR prototype board on 32-bit MMU mode"
- depends on SH_SH7785LCR && 32BIT
- default n
- help
- If you use prototype board, this option is enabled.
-
-config SH_URQUELL
- bool "Urquell"
- depends on CPU_SUBTYPE_SH7786
- select GPIOLIB
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_KFR2R09
- bool "KFR2R09"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- "Kit For R2R for 2009" support.
-
-config SH_ECOVEC
- bool "EcoVec"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_DA7210 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "R0P7724LC0011/21RL (EcoVec)" support.
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_ESPT
- bool "ESPT"
- depends on CPU_SUBTYPE_SH7763
- help
- Select ESPT if configuring for a Renesas SH7763
- with gigabit ether evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_EDOSK7760
- bool "EDOSK7760"
- depends on CPU_SUBTYPE_SH7760
- help
- Select if configuring for a Renesas EDOSK7760
- evaluation board.
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
- select NO_IOPORT_MAP if !PCI
- select IRQ_DOMAIN
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_POLARIS
- bool "SMSC Polaris"
- select CPU_HAS_IPR_IRQ
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7709
- help
- Select if configuring for an SMSC Polaris development board
-
-config SH_SH2007
- bool "SH-2007 board"
- select NO_IOPORT_MAP
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7780
- help
- SH-2007 is a single-board computer based around SH7780 chip
- intended for embedded applications.
- It has an Ethernet interface (SMC9118), direct connected
- Compact Flash socket, two serial ports and PC-104 bus.
- More information at <http://sh2000.sh-linux.org>.
-
-config SH_APSH4A3A
- bool "AP-SH4A-3A"
- select SH_ALPHA_BOARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7785
- help
- Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
-
-config SH_APSH4AD0A
- bool "AP-SH4AD-0A"
- select SH_ALPHA_BOARD
- select HAVE_PCI
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7786
- help
- Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
-
-source "arch/sh/boards/mach-r2d/Kconfig"
-source "arch/sh/boards/mach-highlander/Kconfig"
-source "arch/sh/boards/mach-sdk7780/Kconfig"
-source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-rsk/Kconfig"
-
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int "Magic Panel R2 Version"
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
-
-endmenu
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
deleted file mode 100644
index 4002a22a7c409b..00000000000000
--- a/arch/sh/boards/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Specific board support, not covered by a mach group.
-#
-obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
-obj-$(CONFIG_SH_SH2007) += board-sh2007.o
-obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
-obj-$(CONFIG_SH_URQUELL) += board-urquell.o
-obj-$(CONFIG_SH_SHMIN) += board-shmin.o
-obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o
-obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
-obj-$(CONFIG_SH_ESPT) += board-espt.o
-obj-$(CONFIG_SH_POLARIS) += board-polaris.o
-obj-$(CONFIG_SH_TITAN) += board-titan.o
-obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o
-obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o
-obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o
-
-obj-$(CONFIG_SH_DEVICE_TREE) += of-generic.o
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
deleted file mode 100644
index abf19a947df354..00000000000000
--- a/arch/sh/boards/board-apsh4a3a.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4A-3A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01000000 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4a3a_devices[] __initdata = {
- &nor_flash_device,
- &smsc911x_device,
-};
-
-static int __init apsh4a3a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4a3a_devices,
- ARRAY_SIZE(apsh4a3a_devices));
-}
-device_initcall(apsh4a3a_devices_setup);
-
-static int apsh4a3a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4a3a_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
-}
-
-static void __init apsh4a3a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int apsh4a3a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value &= ~MODE_PIN0; /* Clock Mode 16 */
- value &= ~MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value |= MODE_PIN4;
- value &= ~MODE_PIN5; /* 16-bit Area0 bus width */
- value |= MODE_PIN6; /* Area 0 SRAM interface */
- value |= MODE_PIN7;
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN10; /* Crystal resonator */
- value |= MODE_PIN11; /* Display Unit */
- value |= MODE_PIN12;
- value &= ~MODE_PIN13; /* 29-bit address mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4a3a __initmv = {
- .mv_name = "AP-SH4A-3A",
- .mv_setup = apsh4a3a_setup,
- .mv_clk_init = apsh4a3a_clk_init,
- .mv_init_irq = apsh4a3a_init_irq,
- .mv_mode_pins = apsh4a3a_mode_pins,
-};
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
deleted file mode 100644
index fa031a16c9b5c7..00000000000000
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4AD-0A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4ad0a_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init apsh4ad0a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4ad0a_devices,
- ARRAY_SIZE(apsh4ad0a_devices));
-}
-device_initcall(apsh4ad0a_devices_setup);
-
-static int apsh4ad0a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode 3 */
- value |= MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value &= ~MODE_PIN4; /* 16-bit Area0 bus width */
- value |= MODE_PIN5;
- value |= MODE_PIN6;
- value |= MODE_PIN7; /* Normal mode */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Crystal resonator */
- value &= ~MODE_PIN10; /* 29-bit address mode */
- value &= ~MODE_PIN11; /* PCI-E Root port */
- value &= ~MODE_PIN12; /* 4 lane + 1 lane */
- value |= MODE_PIN13; /* AUD Enable */
- value &= ~MODE_PIN14; /* Normal Operation */
-
- return value;
-}
-
-static int apsh4ad0a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4ad0a_setup(char **cmdline_p)
-{
- pr_info("Alpha Project AP-SH4AD-0A support:\n");
-}
-
-static void __init apsh4ad0a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4ad0a __initmv = {
- .mv_name = "AP-SH4AD-0A",
- .mv_setup = apsh4ad0a_setup,
- .mv_mode_pins = apsh4ad0a_mode_pins,
- .mv_clk_init = apsh4ad0a_clk_init,
- .mv_init_irq = apsh4ad0a_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
deleted file mode 100644
index 0de7d603da2d8c..00000000000000
--- a/arch/sh/boards/board-edosk7705.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-#define ETHERNET_IRQ evt2irq(0x320)
-
-static void __init sh_edosk7705_init_irq(void)
-{
- make_imask_irq(ETHERNET_IRQ);
-}
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ETHERNET_IRQ,
- .end = ETHERNET_IRQ,
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7705_devices[] __initdata = {
- &smc91x_dev,
-};
-
-static int __init init_edosk7705_devices(void)
-{
- return platform_add_devices(edosk7705_devices,
- ARRAY_SIZE(edosk7705_devices));
-}
-device_initcall(init_edosk7705_devices);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
- .mv_name = "EDOSK7705",
- .mv_init_irq = sh_edosk7705_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c
deleted file mode 100644
index 7569d85c5ff5a8..00000000000000
--- a/arch/sh/boards/board-edosk7760.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas Europe EDOSK7760 Board Support
- *
- * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
- * Author: Luca Santini <luca.santini@spesonline.com>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/i2c.h>
-#include <linux/mtd/physmap.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-#include <asm/delay.h>
-#include <asm/i2c-sh7760.h>
-#include <linux/sizes.h>
-
-/* Bus state controller registers for CS4 area */
-#define BSC_CS4BCR 0xA4FD0010
-#define BSC_CS4WCR 0xA4FD0030
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-/* NOR flash */
-static struct mtd_partition edosk7760_nor_flash_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "fs",
- .offset = MTDPART_OFS_APPEND,
- .size = (26 << 20),
- }, {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data edosk7760_nor_flash_data = {
- .width = 4,
- .parts = edosk7760_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(edosk7760_nor_flash_partitions),
-};
-
-static struct resource edosk7760_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00000000 + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device edosk7760_nor_flash_device = {
- .name = "physmap-flash",
- .resource = edosk7760_nor_flash_resources,
- .num_resources = ARRAY_SIZE(edosk7760_nor_flash_resources),
- .dev = {
- .platform_data = &edosk7760_nor_flash_data,
- },
-};
-
-/* i2c initialization functions */
-static struct sh7760_i2c_platdata i2c_pd = {
- .speed_khz = 400,
-};
-
-static struct resource sh7760_i2c1_res[] = {
- {
- .start = SH7760_I2C1_MMIO,
- .end = SH7760_I2C1_MMIOEND,
- .flags = IORESOURCE_MEM,
- },{
- .start = evt2irq(0x9e0),
- .end = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c1_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
-
- .name = SH7760_I2C_DEVNAME,
- .id = 1,
- .resource = sh7760_i2c1_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c1_res),
-};
-
-static struct resource sh7760_i2c0_res[] = {
- {
- .start = SH7760_I2C0_MMIO,
- .end = SH7760_I2C0_MMIOEND,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x9c0),
- .end = evt2irq(0x9c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c0_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
- .name = SH7760_I2C_DEVNAME,
- .id = 0,
- .resource = sh7760_i2c0_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c0_res),
-};
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x2a0),
- .end = evt2irq(0x2a0),
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7760_devices[] __initdata = {
- &smc91x_dev,
- &edosk7760_nor_flash_device,
- &sh7760_i2c0_dev,
- &sh7760_i2c1_dev,
-};
-
-static int __init init_edosk7760_devices(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-
- return platform_add_devices(edosk7760_devices,
- ARRAY_SIZE(edosk7760_devices));
-}
-device_initcall(init_edosk7760_devices);
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_edosk7760 __initmv = {
- .mv_name = "EDOSK7760",
-};
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
deleted file mode 100644
index 6e784b5cf5a0b2..00000000000000
--- a/arch/sh/boards/board-espt.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Data Technology Inc. ESPT-GIGA board support
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* NOR Flash */
-static struct mtd_partition espt_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * SZ_128K),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * SZ_128K),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data espt_nor_flash_data = {
- .width = 2,
- .parts = espt_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
-};
-
-static struct resource espt_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device espt_nor_flash_device = {
- .name = "physmap-flash",
- .resource = espt_nor_flash_resources,
- .num_resources = ARRAY_SIZE(espt_nor_flash_resources),
- .dev = {
- .platform_data = &espt_nor_flash_data,
- },
-};
-
-/* SH-Ether */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 0,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device espt_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-static struct platform_device *espt_devices[] __initdata = {
- &espt_nor_flash_device,
- &espt_eth_device,
-};
-
-static int __init espt_devices_setup(void)
-{
- return platform_add_devices(espt_devices,
- ARRAY_SIZE(espt_devices));
-}
-device_initcall(espt_devices_setup);
-
-static struct sh_machine_vector mv_espt __initmv = {
- .mv_name = "ESPT-GIGA",
-};
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
deleted file mode 100644
index 56bd386ff3b043..00000000000000
--- a/arch/sh/boards/board-magicpanelr2.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/magicpanel/setup.c
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Magic Panel Release 2 board setup
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/sh_intc.h>
-#include <mach/magicpanelr2.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7720.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
-
-/* Wait until reset finished. Timeout is 100ms. */
-static int __init ethernet_reset_finished(void)
-{
- int i;
-
- if (LAN9115_READY)
- return 1;
-
- for (i = 0; i < 10; ++i) {
- mdelay(10);
- if (LAN9115_READY)
- return 1;
- }
-
- return 0;
-}
-
-static void __init reset_ethernet(void)
-{
- /* PMDR: LAN_RESET=on */
- CLRBITS_OUTB(0x10, PORT_PMDR);
-
- udelay(200);
-
- /* PMDR: LAN_RESET=off */
- SETBITS_OUTB(0x10, PORT_PMDR);
-}
-
-static void __init setup_chip_select(void)
-{
- /* CS2: LAN (0x08000000 - 0x0bffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x36db0400, CS2BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x000003c0, CS2WCR);
-
- /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS4BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS4WCR);
-
- /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5ABCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5AWCR);
-
- /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5BBCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5BWCR);
-
- /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS6ABCR);
- /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- __raw_writel(0x001009C1, CS6AWCR);
-}
-
-static void __init setup_port_multiplexing(void)
-{
- /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
- * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
- */
- __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
-
- /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
- * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
- */
- __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
-
- /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
- * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
- */
- __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
-
- /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
- * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
- */
- __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
-
- /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
- * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
- */
- __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
-
- /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
- * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
- */
- __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
-
- /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
- * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
- */
- __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
-
- /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
- * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
- */
- __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
-
- /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
- * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
- */
- __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
-
- /* K7 (x); K6 (x); K5 (x); K4 (x);
- * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
- */
- __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
-
- /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
- * L3 TCK; L2 (x); L1 (x); L0 (x);
- */
- __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
-
- /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
- * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
- * M1 CS5B(CAN3_CS); M0 GPI+(nc);
- */
- __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
-
- /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
- * LAN_RESET=off, BUZZER=off, LCD_BL=off
- */
-#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- __raw_writeb(0x30, PORT_PMDR);
-#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- __raw_writeb(0xF0, PORT_PMDR);
-#else
-#error Unknown revision of PLATFORM_MP_R2
-#endif
-
- /* P7 (x); P6 (x); P5 (x);
- * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
- * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
- */
- __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- __raw_writeb(0x10, PORT_PPDR);
-
- /* R7 A25; R6 A24; R5 A23; R4 A22;
- * R3 A21; R2 A20; R1 A19; R0 A0;
- */
- gpio_request(GPIO_FN_A25, NULL);
- gpio_request(GPIO_FN_A24, NULL);
- gpio_request(GPIO_FN_A23, NULL);
- gpio_request(GPIO_FN_A22, NULL);
- gpio_request(GPIO_FN_A21, NULL);
- gpio_request(GPIO_FN_A20, NULL);
- gpio_request(GPIO_FN_A19, NULL);
- gpio_request(GPIO_FN_A0, NULL);
-
- /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
- * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
- */
- __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
-
- /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
- * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
- */
- __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
-
- /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
- * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
- */
- __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
-
- /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
- * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
- */
- __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
-}
-
-static void __init mpr2_setup(char **cmdline_p)
-{
- /* set Pin Select Register A:
- * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
- * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
- */
- __raw_writew(0xAABC, PORT_PSELA);
- /* set Pin Select Register B:
- * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
- * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
- */
- __raw_writew(0x3C00, PORT_PSELB);
- /* set Pin Select Register C:
- * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
- */
- __raw_writew(0x0000, PORT_PSELC);
- /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
- * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
- */
- __raw_writew(0x0000, PORT_PSELD);
- /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- __raw_writew(0x0101, PORT_UTRCTL);
- /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- __raw_writew(0xA5C0, PORT_UCLKCR_W);
-
- setup_chip_select();
-
- setup_port_multiplexing();
-
- reset_ethernet();
-
- printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
- CONFIG_SH_MAGIC_PANEL_R2_VERSION);
-
- if (ethernet_reset_finished() == 0)
- printk(KERN_WARNING "Ethernet not ready\n");
-}
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0xa8000000,
- .end = 0xabffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct mtd_partition mpr2_partitions[] = {
- /* Reserved for bootloader, read-only */
- {
- .name = "Bootloader",
- .offset = 0x00000000UL,
- .size = MPR2_MTD_BOOTLOADER_SIZE,
- .mask_flags = MTD_WRITEABLE,
- },
- /* Reserved for kernel image */
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MPR2_MTD_KERNEL_SIZE,
- },
- /* Rest is used for Flash FS */
- {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = mpr2_partitions,
- .nr_parts = ARRAY_SIZE(mpr2_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x2000000UL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-/*
- * Add all resources to the platform_device
- */
-
-static struct platform_device *mpr2_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &flash_device,
-};
-
-
-static int __init mpr2_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
-}
-device_initcall(mpr2_devices_setup);
-
-/*
- * Initialize IRQ setting
- */
-static void __init init_mpr2_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
-
- irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
- irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
- irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
- irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
- irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
- irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
-
- intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */
- intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */
- intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */
- intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_mpr2 __initmv = {
- .mv_name = "mpr2",
- .mv_setup = mpr2_setup,
- .mv_init_irq = init_mpr2_IRQ,
-};
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
deleted file mode 100644
index 3de7bac0190392..00000000000000
--- a/arch/sh/boards/board-polaris.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
- *
- * Polaris-specific resource declaration
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <cpu/gpio.h>
-#include <mach-se/mach/se.h>
-
-#define BCR2 (0xFFFFFF62)
-#define WCR2 (0xFFFFFF66)
-#define AREA5_WAIT_CTRL (0x1C00)
-#define WAIT_STATES_10 (0x7)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = PA_EXT5,
- .end = PA_EXT5 + 0x1fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = IRQ0_IRQ,
- .end = IRQ0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PORT_PCDR,
- .end = PORT_PCDR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *polaris_devices[] __initdata = {
- &smsc911x_device,
- &heartbeat_device,
-};
-
-static int __init polaris_initialise(void)
-{
- u16 wcr, bcr_mask;
-
- printk(KERN_INFO "Configuring Polaris external bus\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* Configure area 5 with 2 wait states */
- wcr = __raw_readw(WCR2);
- wcr &= (~AREA5_WAIT_CTRL);
- wcr |= (WAIT_STATES_10 << 10);
- __raw_writew(wcr, WCR2);
-
- /* Configure area 5 for 32-bit access */
- bcr_mask = __raw_readw(BCR2);
- bcr_mask |= 1 << 10;
- __raw_writew(bcr_mask, BCR2);
-
- return platform_add_devices(polaris_devices,
- ARRAY_SIZE(polaris_devices));
-}
-arch_initcall(polaris_initialise);
-
-static struct ipr_data ipr_irq_table[] = {
- /* External IRQs */
- { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
- { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRC
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "sh7709-ext",
- },
-};
-
-static void __init init_polaris_irq(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
-
-static struct sh_machine_vector mv_polaris __initmv = {
- .mv_name = "Polaris",
- .mv_init_irq = init_polaris_irq,
-};
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
deleted file mode 100644
index 603a82325c65f0..00000000000000
--- a/arch/sh/boards/board-secureedge5410.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <mach/secureedge5410.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <cpu/timer.h>
-
-unsigned short secureedge5410_ioport;
-
-/*
- * EraseConfig handling functions
- */
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
- printk("SnapGear: erase switch interrupt!\n");
-
- return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
- unsigned int irq = evt2irq(0x240);
-
- printk("SnapGear: EraseConfig init\n");
-
- /* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
- printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- irq);
- else
- printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- irq);
- return 0;
-}
-device_initcall(eraseconfig_init);
-
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-static void __init init_snapgear_IRQ(void)
-{
- printk("Setup SnapGear IRQ/IPR ...\n");
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
- .mv_name = "SnapGear SecureEdge5410",
- .mv_init_irq = init_snapgear_IRQ,
-};
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
deleted file mode 100644
index 6ea85e4808512f..00000000000000
--- a/arch/sh/boards/board-sh2007.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-2007 board support.
- *
- * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
- * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/io.h>
-#include <asm/machvec.h>
-#include <mach/sh2007.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-struct smsc911x_platform_config smc911x_info = {
- .flags = SMSC911X_USE_32BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct resource smsc9118_0_resources[] = {
- [0] = {
- .start = SMC0_BASE,
- .end = SMC0_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource smsc9118_1_resources[] = {
- [0] = {
- .start = SMC1_BASE,
- .end = SMC1_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x280),
- .end = evt2irq(0x280),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_0_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc9118_0_resources),
- .resource = smsc9118_0_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct platform_device smsc9118_1_device = {
- .name = "smsc911x",
- .id = 1,
- .num_resources = ARRAY_SIZE(smsc9118_1_resources),
- .resource = smsc9118_1_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct resource cf_resources[] = {
- [0] = {
- .start = CF_BASE + CF_OFFSET,
- .end = CF_BASE + CF_OFFSET + 0x0f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CF_BASE + CF_OFFSET + 0x206,
- .end = CF_BASE + CF_OFFSET + 0x20f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_device = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(cf_resources),
- .resource = cf_resources,
-};
-
-static struct platform_device *sh2007_devices[] __initdata = {
- &smsc9118_0_device,
- &smsc9118_1_device,
- &cf_device,
-};
-
-static int __init sh2007_io_init(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
- return 0;
-}
-subsys_initcall(sh2007_io_init);
-
-static void __init sh2007_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * Initialize the board
- */
-static void __init sh2007_setup(char **cmdline_p)
-{
- pr_info("SH-2007 Setup...");
-
- /* setup wait control registers for area 5 */
- __raw_writel(CS5BCR_D, CS5BCR);
- __raw_writel(CS5WCR_D, CS5WCR);
- __raw_writel(CS5PCR_D, CS5PCR);
-
- pr_cont(" done.\n");
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_sh2007 __initmv = {
- .mv_setup = sh2007_setup,
- .mv_name = "sh2007",
- .mv_init_irq = sh2007_init_irq,
-};
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
deleted file mode 100644
index f39c8196efdfd1..00000000000000
--- a/arch/sh/boards/board-sh7757lcr.c
+++ /dev/null
@@ -1,604 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas R0P7757LC0012RL Support.
- *
- * Copyright (C) 2009 - 2010 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/io.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <cpu/sh7757.h>
-#include <asm/heartbeat.h>
-
-static struct resource heartbeat_resource = {
- .start = 0xffec005c, /* PUDR */
- .end = 0xffec005c,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Fast Ethernet */
-#define GBECONT 0xffc10100
-#define GBECONT_RMII1 BIT(17)
-#define GBECONT_RMII0 BIT(16)
-static void sh7757_eth_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800)
- writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
- else
- writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
-}
-
-static struct resource sh_eth0_resources[] = {
- {
- .start = 0xfef00000,
- .end = 0xfef001ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth0_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth0_device = {
- .name = "sh7757-ether",
- .resource = sh_eth0_resources,
- .id = 0,
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .dev = {
- .platform_data = &sh7757_eth0_pdata,
- },
-};
-
-static struct resource sh_eth1_resources[] = {
- {
- .start = 0xfef00800,
- .end = 0xfef009ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth1_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth1_device = {
- .name = "sh7757-ether",
- .resource = sh_eth1_resources,
- .id = 1,
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .dev = {
- .platform_data = &sh7757_eth1_pdata,
- },
-};
-
-static void sh7757_eth_giga_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800) {
- gpio_set_value(GPIO_PTT4, 1);
- writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
- } else {
- gpio_set_value(GPIO_PTT4, 0);
- writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
- }
-}
-
-static struct resource sh_eth_giga0_resources[] = {
- {
- .start = 0xfee00000,
- .end = 0xfee007ff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2960),
- .end = evt2irq(0x2960),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
- .phy = 18,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga0_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga0_resources,
- .id = 2,
- .num_resources = ARRAY_SIZE(sh_eth_giga0_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga0_pdata,
- },
-};
-
-static struct resource sh_eth_giga1_resources[] = {
- {
- .start = 0xfee00800,
- .end = 0xfee00fff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2980),
- .end = evt2irq(0x2980),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
- .phy = 19,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga1_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga1_resources,
- .id = 3,
- .num_resources = ARRAY_SIZE(sh_eth_giga1_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga1_pdata,
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .start = 0xffcb0000,
- .end = 0xffcb00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1c60),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = evt2irq(0x1c80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI_RX,
- .capabilities = MMC_CAP_SD_HIGHSPEED,
-};
-
-static struct resource sdhi_resources[] = {
- [0] = {
- .start = 0xffe50000,
- .end = 0xffe500ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_resources),
- .resource = sdhi_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi_info,
- },
-};
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static struct renesas_usbhs_platform_info usb0_data = {
- .platform_callback = {
- .get_id = usbhs0_get_id,
- },
- .driver_param = {
- .buswait_bwait = 5,
- }
-};
-
-static struct resource usb0_resources[] = {
- [0] = {
- .start = 0xfe450000,
- .end = 0xfe4501ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x840),
- .end = evt2irq(0x840),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb0_device = {
- .name = "renesas_usbhs",
- .id = 0,
- .dev = {
- .platform_data = &usb0_data,
- },
- .num_resources = ARRAY_SIZE(usb0_resources),
- .resource = usb0_resources,
-};
-
-static struct platform_device *sh7757lcr_devices[] __initdata = {
- &heartbeat_device,
- &sh7757_eth0_device,
- &sh7757_eth1_device,
- &sh7757_eth_giga0_device,
- &sh7757_eth_giga1_device,
- &sh_mmcif_device,
- &sdhi_device,
- &usb0_device,
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .type = "m25px64",
-};
-
-static struct spi_board_info spi_board_info[] = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &spi_flash_data,
- },
-};
-
-static int __init sh7757lcr_devices_setup(void)
-{
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* RGMII (PTA) */
- gpio_request(GPIO_FN_ET0_MDC, NULL);
- gpio_request(GPIO_FN_ET0_MDIO, NULL);
- gpio_request(GPIO_FN_ET1_MDC, NULL);
- gpio_request(GPIO_FN_ET1_MDIO, NULL);
-
- /* ONFI (PTB, PTZ) */
- gpio_request(GPIO_FN_ON_NRE, NULL);
- gpio_request(GPIO_FN_ON_NWE, NULL);
- gpio_request(GPIO_FN_ON_NWP, NULL);
- gpio_request(GPIO_FN_ON_NCE0, NULL);
- gpio_request(GPIO_FN_ON_R_B0, NULL);
- gpio_request(GPIO_FN_ON_ALE, NULL);
- gpio_request(GPIO_FN_ON_CLE, NULL);
-
- gpio_request(GPIO_FN_ON_DQ7, NULL);
- gpio_request(GPIO_FN_ON_DQ6, NULL);
- gpio_request(GPIO_FN_ON_DQ5, NULL);
- gpio_request(GPIO_FN_ON_DQ4, NULL);
- gpio_request(GPIO_FN_ON_DQ3, NULL);
- gpio_request(GPIO_FN_ON_DQ2, NULL);
- gpio_request(GPIO_FN_ON_DQ1, NULL);
- gpio_request(GPIO_FN_ON_DQ0, NULL);
-
- /* IRQ8 to 0 (PTB, PTC) */
- gpio_request(GPIO_FN_IRQ8, NULL);
- gpio_request(GPIO_FN_IRQ7, NULL);
- gpio_request(GPIO_FN_IRQ6, NULL);
- gpio_request(GPIO_FN_IRQ5, NULL);
- gpio_request(GPIO_FN_IRQ4, NULL);
- gpio_request(GPIO_FN_IRQ3, NULL);
- gpio_request(GPIO_FN_IRQ2, NULL);
- gpio_request(GPIO_FN_IRQ1, NULL);
- gpio_request(GPIO_FN_IRQ0, NULL);
-
- /* SPI0 (PTD) */
- gpio_request(GPIO_FN_SP0_MOSI, NULL);
- gpio_request(GPIO_FN_SP0_MISO, NULL);
- gpio_request(GPIO_FN_SP0_SCK, NULL);
- gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP0_SS0, NULL);
- gpio_request(GPIO_FN_SP0_SS1, NULL);
- gpio_request(GPIO_FN_SP0_SS2, NULL);
- gpio_request(GPIO_FN_SP0_SS3, NULL);
-
- /* RMII 0/1 (PTE, PTF) */
- gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII0_TXD1, NULL);
- gpio_request(GPIO_FN_RMII0_TXD0, NULL);
- gpio_request(GPIO_FN_RMII0_TXEN, NULL);
- gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII0_RXD1, NULL);
- gpio_request(GPIO_FN_RMII0_RXD0, NULL);
- gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII1_TXD1, NULL);
- gpio_request(GPIO_FN_RMII1_TXD0, NULL);
- gpio_request(GPIO_FN_RMII1_TXEN, NULL);
- gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII1_RXD1, NULL);
- gpio_request(GPIO_FN_RMII1_RXD0, NULL);
- gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
-
- /* eMMC (PTG) */
- gpio_request(GPIO_FN_MMCCLK, NULL);
- gpio_request(GPIO_FN_MMCCMD, NULL);
- gpio_request(GPIO_FN_MMCDAT7, NULL);
- gpio_request(GPIO_FN_MMCDAT6, NULL);
- gpio_request(GPIO_FN_MMCDAT5, NULL);
- gpio_request(GPIO_FN_MMCDAT4, NULL);
- gpio_request(GPIO_FN_MMCDAT3, NULL);
- gpio_request(GPIO_FN_MMCDAT2, NULL);
- gpio_request(GPIO_FN_MMCDAT1, NULL);
- gpio_request(GPIO_FN_MMCDAT0, NULL);
-
- /* LPC (PTG, PTH, PTQ, PTU) */
- gpio_request(GPIO_FN_SERIRQ, NULL);
- gpio_request(GPIO_FN_LPCPD, NULL);
- gpio_request(GPIO_FN_LDRQ, NULL);
- gpio_request(GPIO_FN_WP, NULL);
- gpio_request(GPIO_FN_FMS0, NULL);
- gpio_request(GPIO_FN_LAD3, NULL);
- gpio_request(GPIO_FN_LAD2, NULL);
- gpio_request(GPIO_FN_LAD1, NULL);
- gpio_request(GPIO_FN_LAD0, NULL);
- gpio_request(GPIO_FN_LFRAME, NULL);
- gpio_request(GPIO_FN_LRESET, NULL);
- gpio_request(GPIO_FN_LCLK, NULL);
- gpio_request(GPIO_FN_LGPIO7, NULL);
- gpio_request(GPIO_FN_LGPIO6, NULL);
- gpio_request(GPIO_FN_LGPIO5, NULL);
- gpio_request(GPIO_FN_LGPIO4, NULL);
-
- /* SPI1 (PTH) */
- gpio_request(GPIO_FN_SP1_MOSI, NULL);
- gpio_request(GPIO_FN_SP1_MISO, NULL);
- gpio_request(GPIO_FN_SP1_SCK, NULL);
- gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP1_SS0, NULL);
- gpio_request(GPIO_FN_SP1_SS1, NULL);
-
- /* SDHI (PTI) */
- gpio_request(GPIO_FN_SD_WP, NULL);
- gpio_request(GPIO_FN_SD_CD, NULL);
- gpio_request(GPIO_FN_SD_CLK, NULL);
- gpio_request(GPIO_FN_SD_CMD, NULL);
- gpio_request(GPIO_FN_SD_D3, NULL);
- gpio_request(GPIO_FN_SD_D2, NULL);
- gpio_request(GPIO_FN_SD_D1, NULL);
- gpio_request(GPIO_FN_SD_D0, NULL);
-
- /* SCIF3/4 (PTJ, PTW) */
- gpio_request(GPIO_FN_RTS3, NULL);
- gpio_request(GPIO_FN_CTS3, NULL);
- gpio_request(GPIO_FN_TXD3, NULL);
- gpio_request(GPIO_FN_RXD3, NULL);
- gpio_request(GPIO_FN_RTS4, NULL);
- gpio_request(GPIO_FN_RXD4, NULL);
- gpio_request(GPIO_FN_TXD4, NULL);
- gpio_request(GPIO_FN_CTS4, NULL);
-
- /* SERMUX (PTK, PTL, PTO, PTV) */
- gpio_request(GPIO_FN_COM2_TXD, NULL);
- gpio_request(GPIO_FN_COM2_RXD, NULL);
- gpio_request(GPIO_FN_COM2_RTS, NULL);
- gpio_request(GPIO_FN_COM2_CTS, NULL);
- gpio_request(GPIO_FN_COM2_DTR, NULL);
- gpio_request(GPIO_FN_COM2_DSR, NULL);
- gpio_request(GPIO_FN_COM2_DCD, NULL);
- gpio_request(GPIO_FN_COM2_RI, NULL);
- gpio_request(GPIO_FN_RAC_RXD, NULL);
- gpio_request(GPIO_FN_RAC_RTS, NULL);
- gpio_request(GPIO_FN_RAC_CTS, NULL);
- gpio_request(GPIO_FN_RAC_DTR, NULL);
- gpio_request(GPIO_FN_RAC_DSR, NULL);
- gpio_request(GPIO_FN_RAC_DCD, NULL);
- gpio_request(GPIO_FN_RAC_TXD, NULL);
- gpio_request(GPIO_FN_COM1_TXD, NULL);
- gpio_request(GPIO_FN_COM1_RXD, NULL);
- gpio_request(GPIO_FN_COM1_RTS, NULL);
- gpio_request(GPIO_FN_COM1_CTS, NULL);
-
- writeb(0x10, 0xfe470000); /* SMR0: SerMux mode 0 */
-
- /* IIC (PTM, PTR, PTS) */
- gpio_request(GPIO_FN_SDA7, NULL);
- gpio_request(GPIO_FN_SCL7, NULL);
- gpio_request(GPIO_FN_SDA6, NULL);
- gpio_request(GPIO_FN_SCL6, NULL);
- gpio_request(GPIO_FN_SDA5, NULL);
- gpio_request(GPIO_FN_SCL5, NULL);
- gpio_request(GPIO_FN_SDA4, NULL);
- gpio_request(GPIO_FN_SCL4, NULL);
- gpio_request(GPIO_FN_SDA3, NULL);
- gpio_request(GPIO_FN_SCL3, NULL);
- gpio_request(GPIO_FN_SDA2, NULL);
- gpio_request(GPIO_FN_SCL2, NULL);
- gpio_request(GPIO_FN_SDA1, NULL);
- gpio_request(GPIO_FN_SCL1, NULL);
- gpio_request(GPIO_FN_SDA0, NULL);
- gpio_request(GPIO_FN_SCL0, NULL);
-
- /* USB (PTN) */
- gpio_request(GPIO_FN_VBUS_EN, NULL);
- gpio_request(GPIO_FN_VBUS_OC, NULL);
-
- /* SGPIO1/0 (PTN, PTO) */
- gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO1_DI, NULL);
- gpio_request(GPIO_FN_SGPIO1_DO, NULL);
- gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO0_DI, NULL);
- gpio_request(GPIO_FN_SGPIO0_DO, NULL);
-
- /* WDT (PTN) */
- gpio_request(GPIO_FN_SUB_CLKIN, NULL);
-
- /* System (PTT) */
- gpio_request(GPIO_FN_STATUS1, NULL);
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* PWMX (PTT) */
- gpio_request(GPIO_FN_PWMX1, NULL);
- gpio_request(GPIO_FN_PWMX0, NULL);
-
- /* R-SPI (PTV) */
- gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
- gpio_request(GPIO_FN_R_SPI_MISO, NULL);
- gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
-
- /* EVC (PTV, PTW) */
- gpio_request(GPIO_FN_EVENT7, NULL);
- gpio_request(GPIO_FN_EVENT6, NULL);
- gpio_request(GPIO_FN_EVENT5, NULL);
- gpio_request(GPIO_FN_EVENT4, NULL);
- gpio_request(GPIO_FN_EVENT3, NULL);
- gpio_request(GPIO_FN_EVENT2, NULL);
- gpio_request(GPIO_FN_EVENT1, NULL);
- gpio_request(GPIO_FN_EVENT0, NULL);
-
- /* LED for heartbeat */
- gpio_request(GPIO_PTU3, NULL);
- gpio_direction_output(GPIO_PTU3, 1);
- gpio_request(GPIO_PTU2, NULL);
- gpio_direction_output(GPIO_PTU2, 1);
- gpio_request(GPIO_PTU1, NULL);
- gpio_direction_output(GPIO_PTU1, 1);
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* control for MDIO of Gigabit Ethernet */
- gpio_request(GPIO_PTT4, NULL);
- gpio_direction_output(GPIO_PTT4, 1);
-
- /* control for eMMC */
- gpio_request(GPIO_PTT7, NULL); /* eMMC_RST# */
- gpio_direction_output(GPIO_PTT7, 0);
- gpio_request(GPIO_PTT6, NULL); /* eMMC_INDEX# */
- gpio_direction_output(GPIO_PTT6, 0);
- gpio_request(GPIO_PTT5, NULL); /* eMMC_PRST# */
- gpio_direction_output(GPIO_PTT5, 1);
-
- /* register SPI device information */
- spi_register_board_info(spi_board_info,
- ARRAY_SIZE(spi_board_info));
-
- /* General platform */
- return platform_add_devices(sh7757lcr_devices,
- ARRAY_SIZE(sh7757lcr_devices));
-}
-arch_initcall(sh7757lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7757lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/* Initialize the board */
-static void __init sh7757lcr_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
-}
-
-static int sh7757lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S3 (Low active).
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode: 1 */
-
- return value;
-}
-
-/* The Machine Vector */
-static struct sh_machine_vector mv_sh7757lcr __initmv = {
- .mv_name = "SH7757LCR",
- .mv_setup = sh7757lcr_setup,
- .mv_init_irq = init_sh7757lcr_IRQ,
- .mv_mode_pins = sh7757lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
deleted file mode 100644
index 77dad1e511b465..00000000000000
--- a/arch/sh/boards/board-sh7785lcr.c
+++ /dev/null
@@ -1,384 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. R0P7785LC0011RL Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pca-platform.h>
-#include <linux/i2c-algo-pca.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/gpio/machine.h>
-#include <mach/sh7785lcr.h>
-#include <cpu/sh7785.h>
-#include <asm/heartbeat.h>
-#include <asm/clock.h>
-#include <asm/bl_bit.h>
-
-/*
- * NOTE: This board has 2 physical memory maps.
- * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
- */
-static struct resource heartbeat_resource = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = R8A66597_ADDR,
- .end = R8A66597_ADDR + R8A66597_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = SM107_MEM_ADDR,
- .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SM107_REG_ADDR,
- .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x340),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode_crt = {
- .pixclock = 35714, /* 28MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct fb_videomode sm501_default_mode_pnl = {
- .pixclock = 40000, /* 25MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 2,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = 0,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_pnl,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT |
- SM501FB_FLAG_PANEL_NO_VBIASEN,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_crt,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = 0,
- .mclk = 84 * 1000000,
- .m1xclk = 112 * 1000000,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct resource i2c_proto_resources[] = {
- [0] = {
- .start = PCA9564_PROTO_32BIT_ADDR,
- .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c_resources[] = {
- [0] = {
- .start = PCA9564_ADDR,
- .end = PCA9564_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct gpiod_lookup_table i2c_gpio_table = {
- .dev_id = "i2c.0",
- .table = {
- GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
- .i2c_clock_speed = I2C_PCA_CON_330kHz,
- .timeout = HZ,
-};
-
-static struct platform_device i2c_device = {
- .name = "i2c-pca-platform",
- .id = -1,
- .dev = {
- .platform_data = &i2c_platform_data,
- },
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-static struct platform_device *sh7785lcr_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &r8a66597_usb_host_device,
- &sm501_device,
- &i2c_device,
-};
-
-static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static int __init sh7785lcr_devices_setup(void)
-{
- i2c_register_board_info(0, sh7785lcr_i2c_devices,
- ARRAY_SIZE(sh7785lcr_i2c_devices));
-
- if (mach_is_sh7785lcr_pt()) {
- i2c_device.resource = i2c_proto_resources;
- i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
- }
-
- gpiod_add_lookup_table(&i2c_gpio_table);
- return platform_add_devices(sh7785lcr_devices,
- ARRAY_SIZE(sh7785lcr_devices));
-}
-device_initcall(sh7785lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7785lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-static int sh7785lcr_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-static void sh7785lcr_power_off(void)
-{
- unsigned char *p;
-
- p = ioremap(PLD_POFCR, PLD_POFCR + 1);
- if (!p) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
- *p = 0x01;
- iounmap(p);
- set_bl_bit();
- while (1)
- cpu_relax();
-}
-
-/* Initialize the board */
-static void __init sh7785lcr_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
-
- printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
-
- pm_power_off = sh7785lcr_power_off;
-
- /* sm501 DRAM configuration */
- sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL);
- if (!sm501_reg) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
-
- writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
- iounmap(sm501_reg);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int sh7785lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S1 and S2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN4; /* Clock Mode 16 */
- value |= MODE_PIN5; /* 32-bit Area0 bus width */
- value |= MODE_PIN6; /* 32-bit Area0 bus width */
- value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7785lcr __initmv = {
- .mv_name = "SH7785LCR",
- .mv_setup = sh7785lcr_setup,
- .mv_clk_init = sh7785lcr_clk_init,
- .mv_init_irq = init_sh7785lcr_IRQ,
- .mv_mode_pins = sh7785lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
deleted file mode 100644
index 83296c0b75c45d..00000000000000
--- a/arch/sh/boards/board-shmin.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/shmin/setup.c
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * SHMIN Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/shmin.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-#define PFC_PHCR 0xa400010eUL
-#define INTC_ICR1 0xa4000010UL
-
-static void __init init_shmin_irq(void)
-{
- __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static void __init shmin_setup(char **cmdline_p)
-{
- __set_io_port_base(SHMIN_IO_BASE);
-}
-
-static struct sh_machine_vector mv_shmin __initmv = {
- .mv_name = "SHMIN",
- .mv_setup = shmin_setup,
- .mv_init_irq = init_shmin_irq,
-};
diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c
deleted file mode 100644
index 074a848d8b564d..00000000000000
--- a/arch/sh/boards/board-titan.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/titan/setup.c - Setup for Titan
- *
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static void __init init_titan_irq(void)
-{
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct sh_machine_vector mv_titan __initmv = {
- .mv_name = "Titan",
- .mv_init_irq = init_titan_irq,
-};
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
deleted file mode 100644
index dad2b3b40735cb..00000000000000
--- a/arch/sh/boards/board-urquell.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. SH7786 Urquell Support.
- *
- * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * Based on board-sh7785lcr.c
- * Copyright (C) 2008 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/sh_intc.h>
-#include <mach/urquell.h>
-#include <cpu/sh7786.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/smp-ops.h>
-
-/*
- * bit 1234 5678
- *----------------------------
- * SW1 0101 0010 -> Pck 33MHz version
- * (1101 0010) Pck 66MHz version
- * SW2 0x1x xxxx -> little endian
- * 29bit mode
- * SW47 0001 1000 -> CS0 : on-board flash
- * CS1 : SRAM, registers, LAN, PCMCIA
- * 38400 bps for SCIF1
- *
- * Address
- * 0x00000000 - 0x04000000 (CS0) Nor Flash
- * 0x04000000 - 0x04200000 (CS1) SRAM
- * 0x05000000 - 0x05800000 (CS1) on board register
- * 0x05800000 - 0x06000000 (CS1) LAN91C111
- * 0x06000000 - 0x06400000 (CS1) PCMCIA
- * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
- * 0x10000000 - 0x14000000 (CS4) PCIe
- * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
- * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
- * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
- * 0x1C000000 - (CS7) SH7786 Control register
- */
-
-/* HeartBeat */
-static struct resource heartbeat_resource = {
- .start = BOARDREG(SLEDR),
- .end = BOARDREG(SLEDR),
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x05800300,
- .end = 0x0580030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x360),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* Nor Flash */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct platform_device *urquell_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &nor_flash_device,
-};
-
-static int __init urquell_devices_setup(void)
-{
- /* USB */
- gpio_request(GPIO_FN_USB_OVC0, NULL);
- gpio_request(GPIO_FN_USB_PENC0, NULL);
-
- /* enable LAN */
- __raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
- UBOARDREG(IRL2MSKR));
-
- return platform_add_devices(urquell_devices,
- ARRAY_SIZE(urquell_devices));
-}
-device_initcall(urquell_devices_setup);
-
-static void urquell_power_off(void)
-{
- __raw_writew(0xa5a5, UBOARDREG(SRSTR));
-}
-
-static void __init urquell_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
-
-static int urquell_mode_pins(void)
-{
- return __raw_readw(UBOARDREG(MDSWMR));
-}
-
-static int urquell_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init urquell_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
-
- pm_power_off = urquell_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_urquell __initmv = {
- .mv_name = "Urquell",
- .mv_setup = urquell_setup,
- .mv_init_irq = urquell_init_irq,
- .mv_mode_pins = urquell_mode_pins,
- .mv_clk_init = urquell_clk_init,
-};
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
deleted file mode 100644
index dba5d0c202615a..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
deleted file mode 100644
index 541c82cc30b112..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * AP325RXA sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ap325rxa_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(ap325rxa_sdram_enter_end)
-
- .balign 4
-ENTRY(ap325rxa_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
deleted file mode 100644
index c77b5f00a66a3d..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ /dev/null
@@ -1,573 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas - AP-325RXA
- * (Compatible with Algo System ., LTD. - AP-320A)
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Author : Yusuke Goda <goda.yuske@renesas.com>
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7723.h>
-
-#include <linux/dma-map-ops.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct resource smsc9118_resources[] = {
- [0] = {
- .start = 0xb6080000,
- .end = 0xb60fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc9118_resources),
- .resource = smsc9118_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-/*
- * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
- * If this area erased, this board can not boot.
- */
-static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area0",
- .offset = MTDPART_OFS_APPEND,
- .size = ((7 * 1024 * 1024) + (512 * 1024)),
- }, {
- .name = "CPLD-Data",
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- .size = (1024 * 128 * 2),
- }, {
- .name = "free-area1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data ap325rxa_nor_flash_data = {
- .width = 2,
- .parts = ap325rxa_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
-};
-
-static struct resource ap325rxa_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device ap325rxa_nor_flash_device = {
- .name = "physmap-flash",
- .resource = ap325rxa_nor_flash_resources,
- .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
- .dev = {
- .platform_data = &ap325rxa_nor_flash_data,
- },
-};
-
-static struct mtd_partition nand_partition_info[] = {
- {
- .name = "nand_data",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct resource nand_flash_resources[] = {
- [0] = {
- .start = 0xa4530000,
- .end = 0xa45300ff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
- .parts = nand_partition_info,
- .nr_parts = ARRAY_SIZE(nand_partition_info),
- .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E,
- .has_hwecc = 1,
-};
-
-static struct platform_device nand_flash_device = {
- .name = "sh_flctl",
- .resource = nand_flash_resources,
- .num_resources = ARRAY_SIZE(nand_flash_resources),
- .dev = {
- .platform_data = &nand_flash_data,
- },
-};
-
-#define FPGA_LCDREG 0xB4100180
-#define FPGA_BKLREG 0xB4100212
-#define FPGA_LCDREG_VAL 0x0018
-#define PORT_MSELCRB 0xA4050182
-#define PORT_HIZCRC 0xA405015C
-#define PORT_DRVCRA 0xA405018A
-#define PORT_DRVCRB 0xA405018C
-
-static int ap320_wvga_set_brightness(int brightness)
-{
- if (brightness) {
- gpio_set_value(GPIO_PTS3, 0);
- __raw_writew(0x100, FPGA_BKLREG);
- } else {
- __raw_writew(0, FPGA_BKLREG);
- gpio_set_value(GPIO_PTS3, 1);
- }
-
- return 0;
-}
-
-static void ap320_wvga_power_on(void)
-{
- msleep(100);
-
- /* ASD AP-320/325 LCD ON */
- __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-}
-
-static void ap320_wvga_power_off(void)
-{
- /* ASD AP-320/325 LCD OFF */
- __raw_writew(0, FPGA_LCDREG);
-}
-
-static const struct fb_videomode ap325rxa_lcdc_modes[] = {
- {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 32,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB18,
- .clock_divider = 1,
- .lcd_modes = ap325rxa_lcdc_modes,
- .num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
- .panel_cfg = {
- .width = 152, /* 7.0 inch */
- .height = 91,
- .display_on = ap320_wvga_power_on,
- .display_off = ap320_wvga_power_off,
- },
- .bl_info = {
- .name = "sh_mobile_lcdc_bl",
- .max_brightness = 1,
- .set_brightness = ap320_wvga_set_brightness,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7723_pfc", GPIO_PTZ5, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = ov7725 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- },
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ap325rxa_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn3_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi0_cn3_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn3_device = {
- .name = "sh_mobile_sdhi",
- .id = 0, /* "sdhi0" clock */
- .num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
- .resource = sdhi0_cn3_resources,
- .dev = {
- .platform_data = &sdhi0_cn3_data,
- },
-};
-
-static struct resource sdhi1_cn7_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi1_cn7_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 1, /* "sdhi1" clock */
- .num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
- .resource = sdhi1_cn7_resources,
- .dev = {
- .platform_data = &sdhi1_cn7_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
- .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
-};
-
-static struct i2c_board_info ap325rxa_i2c_devices[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
-};
-
-static struct platform_device *ap325rxa_devices[] __initdata = {
- &smsc9118_device,
- &ap325rxa_nor_flash_device,
- &lcdc_device,
- &nand_flash_device,
- &sdhi0_cn3_device,
- &sdhi1_cn7_device,
-};
-
-extern char ap325rxa_sdram_enter_start;
-extern char ap325rxa_sdram_enter_end;
-extern char ap325rxa_sdram_leave_start;
-extern char ap325rxa_sdram_leave_end;
-
-static int __init ap325rxa_devices_setup(void)
-{
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &ap325rxa_sdram_enter_start,
- &ap325rxa_sdram_enter_end,
- &ap325rxa_sdram_leave_start,
- &ap325rxa_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
- regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* LD3 and LD4 LEDs */
- gpio_request(GPIO_PTX5, NULL); /* RUN */
- gpio_direction_output(GPIO_PTX5, 1);
- gpio_export(GPIO_PTX5, 0);
-
- gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
- gpio_direction_output(GPIO_PTX4, 0);
- gpio_export(GPIO_PTX4, 0);
-
- /* SW1 input */
- gpio_request(GPIO_PTF7, NULL); /* MODE */
- gpio_direction_input(GPIO_PTF7);
- gpio_export(GPIO_PTF7, 0);
-
- /* LCDC */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-
- /* LCD backlight */
- gpio_request(GPIO_PTS3, NULL);
- gpio_direction_output(GPIO_PTS3, 1);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- gpio_request(GPIO_PTZ7, NULL);
- gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
- gpio_request(GPIO_PTZ6, NULL);
- gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
- gpio_request(GPIO_PTZ5, NULL);
- gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
- gpio_request(GPIO_PTZ4, NULL);
- gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
-
- __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
-
- /* FLCTL */
- gpio_request(GPIO_FN_FCE, NULL);
- gpio_request(GPIO_FN_NAF7, NULL);
- gpio_request(GPIO_FN_NAF6, NULL);
- gpio_request(GPIO_FN_NAF5, NULL);
- gpio_request(GPIO_FN_NAF4, NULL);
- gpio_request(GPIO_FN_NAF3, NULL);
- gpio_request(GPIO_FN_NAF2, NULL);
- gpio_request(GPIO_FN_NAF1, NULL);
- gpio_request(GPIO_FN_NAF0, NULL);
- gpio_request(GPIO_FN_FCDE, NULL);
- gpio_request(GPIO_FN_FOE, NULL);
- gpio_request(GPIO_FN_FSC, NULL);
- gpio_request(GPIO_FN_FWE, NULL);
- gpio_request(GPIO_FN_FRB, NULL);
-
- __raw_writew(0, PORT_HIZCRC);
- __raw_writew(0xFFFF, PORT_DRVCRA);
- __raw_writew(0xFFFF, PORT_DRVCRB);
-
- /* SDHI0 - CN3 - SD CARD */
- gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
-
- /* SDHI1 - CN7 - MICRO SD CARD */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register RSTB gpio for ov7725 camera sensor. */
- gpiod_add_lookup_table(&ov7725_gpios);
-
- i2c_register_board_info(0, ap325rxa_i2c_devices,
- ARRAY_SIZE(ap325rxa_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&ap325rxa_ceu_device.dev);
- dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&ap325rxa_ceu_device);
-
- return platform_add_devices(ap325rxa_devices,
- ARRAY_SIZE(ap325rxa_devices));
-}
-arch_initcall(ap325rxa_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int ap325rxa_mode_pins(void)
-{
- /* MD0=0, MD1=0, MD2=0: Clock Mode 0
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=1: Test Mode Disabled
- */
- return MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init ap325rxa_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ap325rxa __initmv = {
- .mv_name = "AP-325RXA",
- .mv_mode_pins = ap325rxa_mode_pins,
- .mv_mem_reserve = ap325rxa_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
deleted file mode 100644
index 37b2452206aa21..00000000000000
--- a/arch/sh/boards/mach-dreamcast/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Sega Dreamcast specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
deleted file mode 100644
index cc06e4cdb4cdf9..00000000000000
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <mach/sysasic.h>
-
-/*
- * Dreamcast System ASIC Hardware Events -
- *
- * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
- * hardware events from system peripherals and triggering an SH7750 IRQ.
- * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
- * set in the Event Mask Registers (EMRs). When a hardware event is
- * triggered, its corresponding bit in the Event Status Registers (ESRs)
- * is set, and that bit should be rewritten to the ESR to acknowledge that
- * event.
- *
- * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908. Event
- * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
- * There are three groups of EMRs that parallel the ESRs. Each EMR group
- * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
- * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
- * triggers IRQ 9.
- *
- * In the kernel, these events are mapped to virtual IRQs so that drivers can
- * respond to them as they would a normal interrupt. In order to keep this
- * mapping simple, the events are mapped as:
- *
- * 6900/6910 - Events 0-31, IRQ 13
- * 6904/6924 - Events 32-63, IRQ 11
- * 6908/6938 - Events 64-95, IRQ 9
- *
- */
-
-#define ESR_BASE 0x005f6900 /* Base event status register */
-#define EMR_BASE 0x005f6910 /* Base event mask register */
-
-/*
- * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
- * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
- */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit position within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/*
- * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
- * (logically mapped to the corresponding bit for the hardware event).
- */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask &= ~(1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask |= (1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void mask_ack_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
- disable_systemasic_irq(data);
- outl((1 << EVENT_BIT(irq)), esr);
-}
-
-struct irq_chip systemasic_int = {
- .name = "System ASIC",
- .irq_mask = disable_systemasic_irq,
- .irq_mask_ack = mask_ack_systemasic_irq,
- .irq_unmask = enable_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
- __u32 emr, esr, status, level;
- __u32 j, bit;
-
- switch (irq) {
- case 13:
- level = 0;
- break;
- case 11:
- level = 1;
- break;
- case 9:
- level = 2;
- break;
- default:
- return irq;
- }
- emr = EMR_BASE + (level << 4) + (level << 2);
- esr = ESR_BASE + (level << 2);
-
- /* Mask the ESR to filter any spurious, unwanted interrupts */
- status = inl(esr);
- status &= inl(emr);
-
- /* Now scan and find the first set bit as the event to map */
- for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
- if (status & bit) {
- irq = HW_EVENT_IRQ_BASE + j + (level << 5);
- return irq;
- }
- }
-
- /* Not reached */
- return irq;
-}
-
-void systemasic_irq_init(void)
-{
- int irq_base, i;
-
- irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
- HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs\n", __func__);
- return;
- }
-
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
-}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
deleted file mode 100644
index 7873cd27e4e008..00000000000000
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- */
-
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
- seconds) to get the standard Unix Epoch when getting the time, and add
- 20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
- registers.*/
-#define AICA_RTC_SECS_H 0xa0710000
-#define AICA_RTC_SECS_L 0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @dev: the RTC device (ignored)
- * @tm: pointer to resulting RTC time structure
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-static int aica_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t t;
-
- do {
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- /* normalize to 1970..2106 time range */
- t = (u32)(val1 - TWENTY_YEARS);
-
- rtc_time64_to_tm(t, tm);
-
- return 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @dev: the RTC device (ignored)
- * @tm: pointer to new RTC time structure
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-static int aica_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t secs = rtc_tm_to_time64(tm);
- u32 adj = secs + TWENTY_YEARS;
-
- do {
- __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
-
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- return 0;
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = aica_rtc_gettimeofday,
- .set_time = aica_rtc_settimeofday,
-};
-
-static int __init aica_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(aica_time_init);
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
deleted file mode 100644
index 2d966c1c2cc188..00000000000000
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * This file originally bore the message (with enclosed-$):
- * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- * SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <mach/sysasic.h>
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
- .mv_name = "Sega Dreamcast",
- .mv_setup = dreamcast_setup,
- .mv_irq_demux = systemasic_irq_demux,
- .mv_init_irq = systemasic_irq_init,
-};
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
deleted file mode 100644
index d78d4904ddee32..00000000000000
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the R0P7724LC0011/21RL (EcoVec)
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-obj-y := setup.o sdram.o
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
deleted file mode 100644
index d2f269169abb94..00000000000000
--- a/arch/sh/boards/mach-ecovec24/sdram.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Ecovec24 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ecovec24_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ecovec24_sdram_enter_end)
-
- .balign 4
-ENTRY(ecovec24_sdram_leave_start)
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- /* DBSC: put memory in auto-refresh mode */
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-
-ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
deleted file mode 100644
index 674da7ebd8b7f5..00000000000000
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ /dev/null
@@ -1,1521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/suspend.h>
-#include <cpu/sh7724.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/platform_data/tsc2007.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/spi/sh_msiof.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/mt9t112.h>
-#include <media/i2c/tw9910.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * Address Interface BusWidth
- *-----------------------------------------
- * 0x0000_0000 uboot 16bit
- * 0x0004_0000 Linux romImage 16bit
- * 0x0014_0000 MTD for Linux 16bit
- * 0x0400_0000 Internal I/O 16/32bit
- * 0x0800_0000 DRAM 32bit
- * 0x1800_0000 MFI 16bit
- */
-
-/* SWITCH
- *------------------------------
- * DS2[1] = FlashROM write protect ON : write protect
- * OFF : No write protect
- * DS2[2] = RMII / TS, SCIF ON : RMII
- * OFF : TS, SCIF3
- * DS2[3] = Camera / Video ON : Camera
- * OFF : NTSC/PAL (IN)
- * DS2[5] = NTSC_OUT Clock ON : On board OSC
- * OFF : SH7724 DV_CLK
- * DS2[6-7] = MMC / SD ON-OFF : SD
- * OFF-ON : MMC
- */
-
-/*
- * FSI - DA7210
- *
- * it needs amixer settings for playing
- *
- * amixer set 'HeadPhone' 80
- * amixer set 'Out Mixer Left DAC Left' on
- * amixer set 'Out Mixer Right DAC Right' on
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/* Heartbeat */
-static unsigned char led_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .nr_bits = 4,
- .bit_pos = led_pos,
-};
-
-static struct resource heartbeat_resource = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "boot loader",
- .offset = 0,
- .size = (5 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8700 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .ether_link_active_low = 1
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-/* USB0 host */
-static void usb0_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB4, power);
-}
-
-static struct r8a66597_platdata usb0_host_data = {
- .on_chip = 1,
- .port_power = usb0_port_power,
-};
-
-static struct resource usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(usb0_host_resources),
- .resource = usb0_host_resources,
-};
-
-/* USB1 host/function */
-static void usb1_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB5, power);
-}
-
-static struct r8a66597_platdata usb1_common_data = {
- .on_chip = 1,
- .port_power = usb1_port_power,
-};
-
-static struct resource usb1_common_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb1_common_device = {
- /* .name will be added in arch_setup */
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_common_data,
- },
- .num_resources = ARRAY_SIZE(usb1_common_resources),
- .resource = usb1_common_resources,
-};
-
-/*
- * USBHS
- */
-static int usbhs_get_id(struct platform_device *pdev)
-{
- return gpio_get_value(GPIO_PTB3);
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
- /* enable vbus if HOST */
- if (!gpio_get_value(GPIO_PTB3))
- gpio_set_value(GPIO_PTB5, 1);
-
- return 0;
-}
-
-static struct renesas_usbhs_platform_info usbhs_info = {
- .platform_callback = {
- .get_id = usbhs_get_id,
- .phy_reset = usbhs_phy_reset,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .detection_delay = 5,
- .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
- .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
- .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
- .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
- },
-};
-
-static struct resource usbhs_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs_device = {
- .name = "renesas_usbhs",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbhs_info,
- },
- .num_resources = ARRAY_SIZE(usbhs_resources),
- .resource = usbhs_resources,
-};
-
-/* LCDC and backlight */
-static const struct fb_videomode ecovec_lcd_modes[] = {
- {
- .name = "Panel",
- .xres = 800,
- .yres = 480,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 70,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static const struct fb_videomode ecovec_dvi_modes[] = {
- {
- .name = "DVI",
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .ch[0] = {
- .interface_type = RGB18,
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-static struct gpiod_lookup_table gpio_backlight_lookup = {
- .dev_id = "gpio-backlight.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct property_entry gpio_backlight_props[] = {
- PROPERTY_ENTRY_BOOL("default-on"),
- { }
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
-};
-
-static const struct platform_device_info gpio_backlight_device_info = {
- .name = "gpio-backlight",
- .data = &gpio_backlight_data,
- .size_data = sizeof(gpio_backlight_data),
- .properties = gpio_backlight_props,
-};
-
-static struct platform_device *gpio_backlight_device;
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x3c,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x3c,
- },
- },
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* ceu.1 */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* Power up/down GPIOs for camera devices and video decoder */
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTU2, "pdn", GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_0_gpios = {
- .dev_id = "0-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA3, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_1_gpios = {
- .dev_id = "1-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA4, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* I2C device */
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct mt9t112_platform_data mt9t112_0_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct mt9t112_platform_data mt9t112_1_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("da7210", 0x1a),
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
- {
- /* 1st camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_0_pdata,
- },
-};
-
-static struct i2c_board_info i2c1_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
- {
- I2C_BOARD_INFO("lis3lv02d", 0x1c),
- .irq = evt2irq(0x620),
- },
- {
- /* 2nd camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_1_pdata,
- },
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .kycr2_delay = 100,
- .keycodes = { KEY_1, 0, 0, 0, 0,
- KEY_2, 0, 0, 0, 0,
- KEY_3, 0, 0, 0, 0,
- KEY_4, 0, 0, 0, 0,
- KEY_5, 0, 0, 0, 0,
- KEY_6, 0, 0, 0, 0, },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* keysc0 clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* TouchScreen */
-#define IRQ0 evt2irq(0x600)
-
-static int ts_get_pendown_state(struct device *dev)
-{
- int val = 0;
- gpio_free(GPIO_FN_INTC_IRQ0);
- gpio_request(GPIO_PTZ0, NULL);
- gpio_direction_input(GPIO_PTZ0);
-
- val = gpio_get_value(GPIO_PTZ0);
-
- gpio_free(GPIO_PTZ0);
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
-
- return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = ts_get_pendown_state,
- .init_platform_hw = ts_init,
-};
-
-static struct i2c_board_info ts_i2c_clients = {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
- .platform_data = &tsc2007_info,
- .irq = IRQ0,
-};
-
-static struct regulator_consumer_supply cn12_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn12_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
- .consumer_supplies = cn12_power_consumers,
-};
-
-static struct fixed_voltage_config cn12_power_info = {
- .supply_name = "CN12 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &cn12_power_init_data,
-};
-
-static struct platform_device cn12_power = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &cn12_power_info,
- },
-};
-
-static struct gpiod_lookup_table cn12_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- /* Offset 7 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
-/* SDHI0 */
-static struct regulator_consumer_supply sdhi0_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data sdhi0_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
- .consumer_supplies = sdhi0_power_consumers,
-};
-
-static struct fixed_voltage_config sdhi0_power_info = {
- .supply_name = "CN11 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &sdhi0_power_init_data,
-};
-
-static struct platform_device sdhi0_power = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &sdhi0_power_info,
- },
-};
-
-static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.1",
- .table = {
- /* Offset 6 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table sdhi0_gpio_table = {
- .dev_id = "sh_mobile_sdhi.0",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTY7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct tmio_mmc_data sdhi0_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct resource sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct gpiod_lookup_table sdhi1_gpio_table = {
- .dev_id = "sh_mobile_sdhi.1",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTW7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct resource sdhi1_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
- .id = 1,
- .dev = {
- .platform_data = &sdhi1_info,
- },
-};
-#endif /* CONFIG_MMC_SH_MMCIF */
-
-#else
-
-/* MMC SPI */
-static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
-{
- gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
-}
-
-static struct mmc_spi_platform_data mmc_spi_info = {
- .caps = MMC_CAP_NEEDS_POLL,
- .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
- .setpower = mmc_spi_setpower,
-};
-
-static struct gpiod_lookup_table mmc_spi_gpio_table = {
- .dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */
- .table = {
- /* Card detect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0,
- GPIO_ACTIVE_LOW),
- /* Write protect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1,
- GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "mmc_spi",
- .platform_data = &mmc_spi_info,
- .max_speed_hz = 5000000,
- .mode = SPI_MODE_0,
- },
-};
-
-/* MSIOF0 */
-static struct sh_msiof_spi_info msiof0_data = {
- .num_chipselect = 1,
-};
-
-static struct resource msiof0_resources[] = {
- [0] = {
- .name = "MSIOF0",
- .start = 0xa4c40000,
- .end = 0xa4c40063,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device msiof0_device = {
- .name = "spi_sh_msiof",
- .id = 0, /* MSIOF0 */
- .dev = {
- .platform_data = &msiof0_data,
- },
- .num_resources = ARRAY_SIZE(msiof0_resources),
- .resource = msiof0_resources,
-};
-
-static struct gpiod_lookup_table msiof_gpio_table = {
- .dev_id = "spi_sh_msiof.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTM4, "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#endif
-
-/* FSI */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_da7210_info = {
- .name = "DA7210",
- .card = "FSIB-DA7210",
- .codec = "da7210.0-001a",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsib-dai",
- },
- .codec_dai = {
- .name = "da7210-hifi",
- },
-};
-
-static struct platform_device fsi_da7210_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_da7210_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
- },
-};
-
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "SH_MMCIF",
- .start = 0xA4CA0000,
- .end = 0xA4CA00FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* MMC2I */
- .start = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* MMC3I */
- .start = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0, /* SH7724: Max Pclk/2 */
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-#endif
-
-static struct platform_device *ecovec_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ecovec_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &sh_eth_device,
- &usb0_host_device,
- &usb1_common_device,
- &usbhs_device,
- &lcdc_device,
- &keysc_device,
- &cn12_power,
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- &sdhi0_power,
- &sdhi0_device,
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sdhi1_device,
-#endif
-#else
- &msiof0_device,
-#endif
- &fsi_device,
- &fsi_da7210_device,
- &irda_device,
- &vou_device,
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sh_mmcif_device,
-#endif
-};
-
-#ifdef CONFIG_I2C
-#define EEPROM_ADDR 0x50
-static u8 mac_read(struct i2c_adapter *a, u8 command)
-{
- struct i2c_msg msg[2];
- u8 buf;
- int ret;
-
- msg[0].addr = EEPROM_ADDR;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = &command;
-
- msg[1].addr = EEPROM_ADDR;
- msg[1].flags = I2C_M_RD;
- msg[1].len = 1;
- msg[1].buf = &buf;
-
- ret = i2c_transfer(a, msg, 2);
- if (ret < 0) {
- printk(KERN_ERR "error %d\n", ret);
- buf = 0xff;
- }
-
- return buf;
-}
-
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- struct i2c_adapter *a = i2c_get_adapter(1);
- int i;
-
- if (!a) {
- pr_err("can not get I2C 1\n");
- return;
- }
-
- /* read MAC address from EEPROM */
- for (i = 0; i < sizeof(pd->mac_addr); i++) {
- pd->mac_addr[i] = mac_read(a, 0x10 + i);
- msleep(10);
- }
-
- i2c_put_adapter(a);
-}
-#else
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- pr_err("unable to read sh_eth MAC address\n");
-}
-#endif
-
-#define PORT_HIZA 0xA4050158
-#define IODRIVEA 0xA405018A
-
-extern char ecovec24_sdram_enter_start;
-extern char ecovec24_sdram_enter_end;
-extern char ecovec24_sdram_leave_start;
-extern char ecovec24_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- struct clk *clk;
- bool cn12_enabled = false;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ecovec24_sdram_enter_start,
- &ecovec24_sdram_enter_end,
- &ecovec24_sdram_leave_start,
- &ecovec24_sdram_leave_end);
-
- /* enable STATUS0, STATUS2 and PDSTATUS */
- gpio_request(GPIO_FN_STATUS0, NULL);
- gpio_request(GPIO_FN_STATUS2, NULL);
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable SCIFA0 */
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
-
- /* enable debug LED */
- gpio_request(GPIO_PTG0, NULL);
- gpio_request(GPIO_PTG1, NULL);
- gpio_request(GPIO_PTG2, NULL);
- gpio_request(GPIO_PTG3, NULL);
- gpio_direction_output(GPIO_PTG0, 0);
- gpio_direction_output(GPIO_PTG1, 0);
- gpio_direction_output(GPIO_PTG2, 0);
- gpio_direction_output(GPIO_PTG3, 0);
- __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
-
- /* enable SH-Eth */
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_output(GPIO_PTA1, 1);
- mdelay(20);
-
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_FN_LNKSTA, NULL);
-
- /* enable USB */
- __raw_writew(0x0000, 0xA4D80000);
- __raw_writew(0x0000, 0xA4D90000);
- gpio_request(GPIO_PTB3, NULL);
- gpio_request(GPIO_PTB4, NULL);
- gpio_request(GPIO_PTB5, NULL);
- gpio_direction_input(GPIO_PTB3);
- gpio_direction_output(GPIO_PTB4, 0);
- gpio_direction_output(GPIO_PTB5, 0);
- __raw_writew(0x0600, 0xa40501d4);
- __raw_writew(0x0600, 0xa4050192);
-
- if (gpio_get_value(GPIO_PTB3)) {
- printk(KERN_INFO "USB1 function is selected\n");
- usb1_common_device.name = "r8a66597_udc";
- } else {
- printk(KERN_INFO "USB1 host is selected\n");
- usb1_common_device.name = "r8a66597_hcd";
- }
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- gpio_request(GPIO_PTE6, NULL);
- gpio_request(GPIO_PTU1, NULL);
- gpio_request(GPIO_PTA2, NULL);
- gpio_direction_input(GPIO_PTE6);
- gpio_direction_output(GPIO_PTU1, 0);
- gpio_direction_output(GPIO_PTA2, 0);
-
- /* I/O buffer drive ability is high */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
-
- if (gpio_get_value(GPIO_PTE6)) {
- /* DVI */
- lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1;
- lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes);
-
- /* No backlight */
- gpio_backlight_data.fbdev = NULL;
-
- gpio_set_value(GPIO_PTA2, 1);
- gpio_set_value(GPIO_PTU1, 1);
- } else {
- /* Panel */
- lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2;
- lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes);
-
- /* FIXME
- *
- * LCDDON control is needed for Panel,
- * but current sh_mobile_lcdc driver doesn't control it.
- * It is temporary correspondence
- */
- gpio_request(GPIO_PTF4, NULL);
- gpio_direction_output(GPIO_PTF4, 1);
-
- /* enable TouchScreen */
- i2c_register_board_info(0, &ts_i2c_clients, 1);
- irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
- }
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* enable KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
-
- /* enable user debug switch */
- gpio_request(GPIO_PTR0, NULL);
- gpio_request(GPIO_PTR4, NULL);
- gpio_request(GPIO_PTR5, NULL);
- gpio_request(GPIO_PTR6, NULL);
- gpio_direction_input(GPIO_PTR0);
- gpio_direction_input(GPIO_PTR4);
- gpio_direction_input(GPIO_PTR5);
- gpio_direction_input(GPIO_PTR6);
-
- /* SD-card slot CN11 */
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
-#else
- /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
- gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
- gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
- gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
-
- gpiod_add_lookup_table(&mmc_spi_gpio_table);
- gpiod_add_lookup_table(&msiof_gpio_table);
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-#endif
-
- /* MMC/SD-card slot CN12 */
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
- gpio_request(GPIO_FN_MMC_D7, NULL);
- gpio_request(GPIO_FN_MMC_D6, NULL);
- gpio_request(GPIO_FN_MMC_D5, NULL);
- gpio_request(GPIO_FN_MMC_D4, NULL);
- gpio_request(GPIO_FN_MMC_D3, NULL);
- gpio_request(GPIO_FN_MMC_D2, NULL);
- gpio_request(GPIO_FN_MMC_D1, NULL);
- gpio_request(GPIO_FN_MMC_D0, NULL);
- gpio_request(GPIO_FN_MMC_CLK, NULL);
- gpio_request(GPIO_FN_MMC_CMD, NULL);
-
- cn12_enabled = true;
-#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
-
- cn12_enabled = true;
-#endif
-
- if (cn12_enabled)
- /* I/O buffer drive ability is high for CN12 */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
- IODRIVEA);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI B */
- clk = clk_get(NULL, "fsib_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimckb_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimckb_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 0);
- mdelay(20);
-
- /* enable motion sensor */
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_direction_input(GPIO_FN_INTC_IRQ1);
-
- /* set VPU clock to 166 MHz */
- clk = clk_get(NULL, "vpu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 166000000));
- clk_put(clk);
- }
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
- gpio_request(GPIO_PTU5, NULL);
- gpio_direction_output(GPIO_PTU5, 0);
-
- /* Register gpio lookup tables for cameras and video decoder */
- gpiod_add_lookup_table(&tw9910_gpios);
- gpiod_add_lookup_table(&mt9t112_0_gpios);
- gpiod_add_lookup_table(&mt9t112_1_gpios);
-
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
-
- i2c_register_board_info(1, i2c1_devices,
- ARRAY_SIZE(i2c1_devices));
-
-#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* AK8813 power / reset sequence */
- gpio_request(GPIO_PTG4, NULL);
- gpio_request(GPIO_PTU3, NULL);
- /* Reset */
- gpio_direction_output(GPIO_PTG4, 0);
- /* Power down */
- gpio_direction_output(GPIO_PTU3, 1);
-
- udelay(10);
-
- /* Power up, reset */
- gpio_set_value(GPIO_PTU3, 0);
-
- udelay(10);
-
- /* Remove reset */
- gpio_set_value(GPIO_PTG4, 1);
-#endif
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ecovec_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[0]);
-
- device_initialize(&ecovec_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[1]);
-
- gpiod_add_lookup_table(&cn12_power_gpiod_table);
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
- gpiod_add_lookup_table(&sdhi0_gpio_table);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- gpiod_add_lookup_table(&sdhi1_gpio_table);
-#endif
-#endif
-
- gpiod_add_lookup_table(&gpio_backlight_lookup);
- gpio_backlight_device = platform_device_register_full(
- &gpio_backlight_device_info);
- if (IS_ERR(gpio_backlight_device))
- return PTR_ERR(gpio_backlight_device);
-
- return platform_add_devices(ecovec_devices,
- ARRAY_SIZE(ecovec_devices));
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- sh_eth_init(&sh_eth_plat);
- return 0;
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ecovec_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ecovec __initmv = {
- .mv_name = "R0P7724 (EcoVec)",
- .mv_mem_reserve = ecovec_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
deleted file mode 100644
index b0abd03cac4e57..00000000000000
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_HIGHLANDER
-
-choice
- prompt "Highlander options"
- default SH_R7780MP
-
-config SH_R7780RP
- bool "R7780RP-1 board support"
- depends on CPU_SUBTYPE_SH7780
-
-config SH_R7780MP
- bool "R7780MP board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the mass-production
- version of the R7780RP. If in doubt, say Y.
-
-config SH_R7785RP
- bool "R7785RP board support"
- depends on CPU_SUBTYPE_SH7785
- select GPIOLIB
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile
deleted file mode 100644
index 880ed68138b00f..00000000000000
--- a/arch/sh/boards/mach-highlander/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Highlander specific parts of the kernel
-#
-obj-y := setup.o
-obj-$(CONFIG_SH_R7780RP) += irq-r7780rp.o
-obj-$(CONFIG_SH_R7780MP) += irq-r7780mp.o
-obj-$(CONFIG_SH_R7785RP) += irq-r7785rp.o pinmux-r7785rp.o
-
-ifneq ($(CONFIG_SH_R7785RP),y)
-obj-$(CONFIG_PUSH_SWITCH) += psw.o
-endif
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
deleted file mode 100644
index f46637377b6a18..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780MP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- CF, /* Compact Flash */
- TP, /* Touch panel */
- SCIF1, /* FPGA SCIF1 */
- SCIF0, /* FPGA SCIF0 */
- SMBUS, /* SMBUS */
- RTC, /* RTC Alarm */
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
-
- /* external bus connector */
- EXT1, EXT2, EXT4, EXT5, EXT6,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(SCIF1, IRQ_SCIF1),
- INTC_IRQ(SCIF0, IRQ_SCIF0),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(AX88796, IRQ_AX88796),
- INTC_IRQ(PSW, IRQ_PSW),
-
- INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
- 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
- IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
- IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
- 0, IRQ_AX88796, IRQ_PSW,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
- printk(KERN_INFO "Using r7780mp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
deleted file mode 100644
index c61177e8724ba7..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780RP-1 Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
-
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
- CF, /* Compact Flash */
-
- PCI_A,
- PCI_B,
- PCI_C,
- PCI_D,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
- INTC_IRQ(PCI_B, 66),
- INTC_IRQ(PCI_C, 67),
- INTC_IRQ(PCI_D, 68),
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(PSW, IRQ_PSW),
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa5000000, 0, 16, /* IRLMSK */
- { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 65, 66, 67, 68,
- IRQ_CF, 0, 0, 0,
- 0, 0, 0, 0,
- IRQ_AX88796, IRQ_PSW
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if (__raw_readw(0xa5000600)) {
- printk(KERN_INFO "Using r7780rp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
deleted file mode 100644
index 0ebebbed0d63fb..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7785RP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 - 2008 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* FPGA specific interrupt sources */
- CF, /* Compact Flash */
- SMBUS, /* SMBUS */
- TP, /* Touch panel */
- RTC, /* RTC Alarm */
- TH_ALERT, /* Temperature sensor */
- AX88796, /* Ethernet controller */
-
- /* external bus connector */
- EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
-
- INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
- INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
-
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
-
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000010, 0, 16, /* IRLMCR1 */
- { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
- RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
- { 0xa4000012, 0, 16, /* IRLMCR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
- IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
- IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
- IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
- return NULL;
-
- printk(KERN_INFO "Using r7785rp interrupt controller.\n");
-
- __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
-
- /* Setup the FPGA IRL */
- __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
- __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
- __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
- __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
- __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
- __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
-
- register_intc_controller(&intc_desc);
- return irl2irq;
-}
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
deleted file mode 100644
index 703179faf652b2..00000000000000
--- a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <cpu/sh7785.h>
-
-void __init highlander_plat_pinmux_setup(void)
-{
- /* SCIF0 */
- gpio_request(GPIO_FN_SCIF0_CTS, NULL);
- gpio_request(GPIO_FN_SCIF0_RTS, NULL);
- gpio_request(GPIO_FN_SCIF0_SCK, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
-}
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
deleted file mode 100644
index d445c54f74e440..00000000000000
--- a/arch/sh/boards/mach-highlander/psw.c
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/highlander.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int l, mask;
- int ret = 0;
-
- l = __raw_readw(PA_DBSW);
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- mask = l & 0x70;
- /* Figure out who raised it */
- if (mask & (1 << psw_info->bit)) {
- psw->state = !!(mask & (1 << psw_info->bit));
- if (psw->state) /* debounce */
- mod_timer(&psw->debounce, jiffies + 50);
-
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- l |= (0x7 << 12);
- __raw_writew(l, PA_DBSW);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
- [0] = {
- .start = IRQ_PSW,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info s2_platform_data = {
- .name = "s2",
- .bit = 6,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s2_platform_data,
- },
-};
-
-static struct push_switch_platform_info s3_platform_data = {
- .name = "s3",
- .bit = 5,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s3_platform_data,
- },
-};
-
-static struct push_switch_platform_info s4_platform_data = {
- .name = "s4",
- .bit = 4,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s4_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
deleted file mode 100644
index 533393d779c2b9..00000000000000
--- a/arch/sh/boards/mach-highlander/setup.c
+++ /dev/null
@@ -1,416 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/setup.c
- *
- * Renesas Solutions Highlander Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005 - 2008 Paul Mundt
- *
- * This contains support for the R7780RP-1, R7780MP, and R7785RP
- * Highlander modules.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/types.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/clkdev.h>
-#include <net/ax88796.h>
-#include <asm/machvec.h>
-#include <mach/highlander.h>
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xA4200000,
- .end = 0xA42000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EXT1, /* irq number */
- .end = IRQ_EXT1,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0xb0000000,
- .end = 0xb00000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- .start = IRQ_EXT4, /* irq number */
- .end = IRQ_EXT4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x08 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c + 0x16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CF,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OBLED,
- .end = PA_OBLED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-#ifndef CONFIG_SH_R7785RP
-static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-#endif
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
-
- /* R7785RP has a slightly more sensible FPGA.. */
-#ifndef CONFIG_SH_R7785RP
- .dev = {
- .platform_data = &heartbeat_data,
- },
-#endif
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct ax_plat_data ax88796_platdata = {
- .flags = AXFLG_HAS_93CX6,
- .wordlength = 2,
- .dcr_val = 0x1,
- .rcr_val = 0x40,
-};
-
-static struct resource ax88796_resources[] = {
- {
-#ifdef CONFIG_SH_R7780RP
- .start = 0xa5800400,
- .end = 0xa5800400 + (0x20 * 0x2) - 1,
-#else
- .start = 0xa4100400,
- .end = 0xa4100400 + (0x20 * 0x2) - 1,
-#endif
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_AX88796,
- .end = IRQ_AX88796,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ax88796_device = {
- .name = "ax88796",
- .id = 0,
-
- .dev = {
- .platform_data = &ax88796_platdata,
- },
-
- .num_resources = ARRAY_SIZE(ax88796_resources),
- .resource = ax88796_resources,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-/* This config is flash board for mass production. */
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = PA_NORFLASH_ADDR,
- .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct resource smbus_resources[] = {
- [0] = {
- .start = PA_SMCR,
- .end = PA_SMCR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SMBUS,
- .end = IRQ_SMBUS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smbus_device = {
- .name = "i2c-highlander",
- .id = 0,
- .num_resources = ARRAY_SIZE(smbus_resources),
- .resource = smbus_resources,
-};
-
-static struct i2c_board_info __initdata highlander_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static struct platform_device *r7780rp_devices[] __initdata = {
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &heartbeat_device,
- &smbus_device,
- &nor_flash_device,
-#ifndef CONFIG_SH_R7780RP
- &ax88796_device,
-#endif
-};
-
-/*
- * The CF is connected using a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init r7780rp_devices_setup(void)
-{
- int ret = 0;
-
-#ifndef CONFIG_SH_R7780RP
- if (register_trapped_io(&cf_trapped_io) == 0)
- ret |= platform_device_register(&cf_ide_device);
-#endif
-
- ret |= platform_add_devices(r7780rp_devices,
- ARRAY_SIZE(r7780rp_devices));
-
- ret |= i2c_register_board_info(0, highlander_i2c_devices,
- ARRAY_SIZE(highlander_i2c_devices));
-
- return ret;
-}
-device_initcall(r7780rp_devices_setup);
-
-/*
- * Platform specific clocks
- */
-static int ivdr_clk_enable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
- return 0;
-}
-
-static void ivdr_clk_disable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
-}
-
-static struct sh_clk_ops ivdr_clk_ops = {
- .enable = ivdr_clk_enable,
- .disable = ivdr_clk_disable,
-};
-
-static struct clk ivdr_clk = {
- .ops = &ivdr_clk_ops,
-};
-
-static struct clk *r7780rp_clocks[] = {
- &ivdr_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
-};
-
-static void r7780rp_power_off(void)
-{
- if (mach_is_r7780mp() || mach_is_r7785rp())
- __raw_writew(0x0001, PA_POFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init highlander_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(PA_VERREG);
- int i;
-
- printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
- mach_is_r7780rp() ? "R7780RP-1" :
- mach_is_r7780mp() ? "R7780MP" :
- "R7785RP");
-
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d)\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf);
-
- highlander_plat_pinmux_setup();
-
- /*
- * Enable the important clocks right away..
- */
- for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
- struct clk *clk = r7780rp_clocks[i];
-
- clk_register(clk);
- clk_enable(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
-
- if (mach_is_r7780rp())
- __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
-
- __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
-
- pm_power_off = r7780rp_power_off;
-}
-
-static unsigned char irl2irq[HL_NR_IRL];
-
-static int highlander_irq_demux(int irq)
-{
- if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-static void __init highlander_init_irq(void)
-{
- unsigned char *ucp = highlander_plat_irq_setup();
-
- if (ucp) {
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
- memcpy(irl2irq, ucp, HL_NR_IRL);
- }
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_highlander __initmv = {
- .mv_name = "Highlander",
- .mv_setup = highlander_setup,
- .mv_init_irq = highlander_init_irq,
- .mv_irq_demux = highlander_irq_demux,
-};
diff --git a/arch/sh/boards/mach-hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
deleted file mode 100644
index 4b0fe29e5612eb..00000000000000
--- a/arch/sh/boards/mach-hp6xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HP6xx specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_PM) += pm.o pm_wakeup.o
-obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
deleted file mode 100644
index e5c4c7d34139ea..00000000000000
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * bios-less APM driver for hp680
- *
- * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
- * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-#include <asm/adc.h>
-#include <mach/hp6xx.h>
-
-/* percentage values */
-#define APM_CRITICAL 10
-#define APM_LOW 30
-
-/* resonably sane values */
-#define HP680_BATTERY_MAX 898
-#define HP680_BATTERY_MIN 486
-#define HP680_BATTERY_AC_ON 1023
-
-#define MODNAME "hp6x0_apm"
-
-#define PGDR 0xa400012c
-
-static void hp6x0_apm_get_power_status(struct apm_power_info *info)
-{
- int battery, backup, charging, percentage;
- u8 pgdr;
-
- battery = adc_single(ADC_CHANNEL_BATTERY);
- backup = adc_single(ADC_CHANNEL_BACKUP);
- charging = adc_single(ADC_CHANNEL_CHARGE);
-
- percentage = 100 * (battery - HP680_BATTERY_MIN) /
- (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
-
- /* % of full battery */
- info->battery_life = percentage;
-
- /* We want our estimates in minutes */
- info->units = 0;
-
- /* Extremely(!!) rough estimate, we will replace this with a datalist later on */
- info->time = (2 * battery);
-
- info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
- APM_AC_ONLINE : APM_AC_OFFLINE;
-
- pgdr = __raw_readb(PGDR);
- if (pgdr & PGDR_MAIN_BATTERY_OUT) {
- info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
- info->battery_flag = 0x80;
- } else if (charging < 8) {
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- info->battery_flag = 0x08;
- info->ac_line_status = 0x01;
- } else if (percentage <= APM_CRITICAL) {
- info->battery_status = APM_BATTERY_STATUS_CRITICAL;
- info->battery_flag = 0x04;
- } else if (percentage <= APM_LOW) {
- info->battery_status = APM_BATTERY_STATUS_LOW;
- info->battery_flag = 0x02;
- } else {
- info->battery_status = APM_BATTERY_STATUS_HIGH;
- info->battery_flag = 0x01;
- }
-}
-
-static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
-{
- if (!APM_DISABLED)
- apm_queue_event(APM_USER_SUSPEND);
-
- return IRQ_HANDLED;
-}
-
-static int __init hp6x0_apm_init(void)
-{
- int ret;
-
- ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- 0, MODNAME, NULL);
- if (unlikely(ret < 0)) {
- printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
- HP680_BTN_IRQ);
- return ret;
- }
-
- apm_get_power_status = hp6x0_apm_get_power_status;
-
- return ret;
-}
-
-static void __exit hp6x0_apm_exit(void)
-{
- free_irq(HP680_BTN_IRQ, 0);
-}
-
-module_init(hp6x0_apm_init);
-module_exit(hp6x0_apm_exit);
-
-MODULE_AUTHOR("Adriy Skulysh");
-MODULE_DESCRIPTION("hp6xx Advanced Power Management");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
deleted file mode 100644
index fe505ec168d021..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/bl_bit.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-#include <asm/freq.h>
-#include <asm/watchdog.h>
-
-#define INTR_OFFSET 0x600
-
-#define STBCR 0xffffff82
-#define STBCR2 0xffffff88
-
-#define STBCR_STBY 0x80
-#define STBCR_MSTP2 0x04
-
-#define MCR 0xffffff68
-#define RTCNT 0xffffff70
-
-#define MCR_RMODE 2
-#define MCR_RFSH 4
-
-extern u8 wakeup_start;
-extern u8 wakeup_end;
-
-static void pm_enter(void)
-{
- u8 stbcr, csr;
- u16 frqcr, mcr;
- u32 vbr_new, vbr_old;
-
- set_bl_bit();
-
- /* set wdt */
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- csr |= WTCSR_CKS_4096;
- sh_wdt_write_csr(csr);
- csr = sh_wdt_read_csr();
- sh_wdt_write_cnt(0);
-
- /* disable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
- __raw_writew(frqcr, FRQCR);
-
- /* enable standby */
- stbcr = __raw_readb(STBCR);
- __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
-
- /* set self-refresh */
- mcr = __raw_readw(MCR);
- __raw_writew(mcr & ~MCR_RFSH, MCR);
-
- /* set interrupt handler */
- asm volatile("stc vbr, %0" : "=r" (vbr_old));
- vbr_new = get_zeroed_page(GFP_ATOMIC);
- udelay(50);
- memcpy((void*)(vbr_new + INTR_OFFSET),
- &wakeup_start, &wakeup_end - &wakeup_start);
- asm volatile("ldc %0, vbr" : : "r" (vbr_new));
-
- __raw_writew(0, RTCNT);
- __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
-
- cpu_sleep();
-
- asm volatile("ldc %0, vbr" : : "r" (vbr_old));
-
- free_page(vbr_new);
-
- /* enable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr |= FRQCR_PSTBY;
- __raw_writew(frqcr, FRQCR);
- udelay(50);
- frqcr |= FRQCR_PLLEN;
- __raw_writew(frqcr, FRQCR);
-
- __raw_writeb(stbcr, STBCR);
-
- clear_bl_bit();
-}
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
- u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
- u8 scr;
- u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
- outb(0, HD64461_PCC1CSCIER);
-
- scr = inb(HD64461_PCC1SCR);
- scr |= HD64461_PCCSCR_VCC1;
- outb(scr, HD64461_PCC1SCR);
-
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr |= HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
- __raw_writeb(0x1f, DACR);
-
- stbcr = __raw_readb(STBCR);
- __raw_writeb(0x01, STBCR);
-
- stbcr2 = __raw_readb(STBCR2);
- __raw_writeb(0x7f , STBCR2);
-
- outw(0xf07f, HD64461_SCPUCR);
-
- pm_enter();
-
- outw(0, HD64461_SCPUCR);
- __raw_writeb(stbcr, STBCR);
- __raw_writeb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-
- outb(0x4c, HD64461_PCC1CSCIER);
- outb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-static const struct platform_suspend_ops hp6x0_pm_ops = {
- .enter = hp6x0_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
- suspend_set_ops(&hp6x0_pm_ops);
- return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
deleted file mode 100644
index 0fd43301f083d0..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-
-#include <linux/linkage.h>
-#include <cpu/mmu_context.h>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * For more details, please have a look at entry.S
- */
-
-#define k0 r0
-#define k1 r1
-
-ENTRY(wakeup_start)
-! clear STBY bit
- mov #-126, k1
- and #127, k0
- mov.b k0, @k1
-! enable refresh
- mov.l 5f, k1
- mov.w 6f, k0
- mov.w k0, @k1
-! jump to handler
- mov.l 4f, k1
- jmp @k1
- nop
-
- .align 2
-4: .long handle_interrupt
-5: .long 0xffffff68
-6: .word 0x0524
-
-ENTRY(wakeup_end)
- nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
deleted file mode 100644
index 2ceead68d7bf82..00000000000000
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/sh_intc.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-#define SCPCR 0xa4000116
-#define SCPDR 0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x15000000 + 0x1f0,
- .end = 0x15000000 + 0x1f0 + 0x08 - 0x01,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x15000000 + 0x1fe,
- .end = 0x15000000 + 0x1fe + 0x01,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
- .name = "jornada680_kbd",
- .id = -1,
-};
-
-static void dac_audio_start(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker on */
- v = inw(HD64461_GPADR);
- v &= ~HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker on */
- v8 = inb(PKDR);
- v8 &= ~PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_enable(pdata->channel);
-}
-
-static void dac_audio_stop(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker off */
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker off */
- v8 = inb(PKDR);
- v8 |= PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_output(0, pdata->channel);
- sh_dac_disable(pdata->channel);
-}
-
-static struct dac_audio_pdata dac_audio_platform_data = {
- .buffer_size = 64000,
- .channel = 1,
- .start = dac_audio_start,
- .stop = dac_audio_stop,
-};
-
-static struct platform_device dac_audio_device = {
- .name = "dac_audio",
- .id = -1,
- .dev = {
- .platform_data = &dac_audio_platform_data,
- }
-
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
- &cf_ide_device,
- &jornadakbd_device,
- &dac_audio_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
- /* Gets touchscreen and powerbutton IRQ working */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
- return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
- u8 v8;
- u16 v;
-
- v = inw(HD64461_STBCR);
- v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
- HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
- HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
- HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
- HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
- v |= HD64461_STBCR_SPC1ST;
-#endif
- outw(v, HD64461_STBCR);
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
- outw(v, HD64461_GPADR);
-
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
- sh_dac_output(0, DAC_SPEAKER_VOLUME);
- sh_dac_disable(DAC_SPEAKER_VOLUME);
- v8 = __raw_readb(DACR);
- v8 &= ~DACR_DAE;
- __raw_writeb(v8,DACR);
-
- v8 = __raw_readb(SCPDR);
- v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
- v8 &= ~SCPDR_TS_SCAN_ENABLE;
- __raw_writeb(v8, SCPDR);
-
- v = __raw_readw(SCPCR);
- v &= ~SCPCR_TS_MASK;
- v |= SCPCR_TS_ENABLE;
- __raw_writew(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
- .mv_name = "hp6xx",
- .mv_setup = hp6xx_setup,
- /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
- .mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
deleted file mode 100644
index 4a4a35ad7ba07c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
-obj-y += lcd_wqvga.o
-endif
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
deleted file mode 100644
index f6bbac106d1328..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 LCD panel support
- *
- * Copyright (C) 2009 Magnus Damm
- *
- * Register settings based on the out-of-tree t33fb.c driver
- * Copyright (C) 2008 Lineo Solutions, Inc.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <mach/kfr2r09.h>
-#include <cpu/sh7724.h>
-
-/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
- * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
- * communicating with the main port of the LCDC using an 18-bit SYS interface.
- *
- * The device code for this LCD module is 0x01221517.
- */
-
-static const unsigned char data_frame_if[] = {
- 0x02, /* WEMODE: 1=cont, 0=one-shot */
- 0x00, 0x00,
- 0x00, /* EPF, DFM */
- 0x02, /* RIM[1] : 1 (18bpp) */
-};
-
-static const unsigned char data_panel[] = {
- 0x0b,
- 0x63, /* 400 lines */
- 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
-};
-
-static const unsigned char data_timing[] = {
- 0x00, 0x00, 0x13, 0x08, 0x08,
-};
-
-static const unsigned char data_timing_src[] = {
- 0x11, 0x01, 0x00, 0x01,
-};
-
-static const unsigned char data_gamma[] = {
- 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
- 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
-};
-
-static const unsigned char data_power[] = {
- 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
-};
-
-static unsigned long read_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- return so->read_data(sohandle);
-}
-
-static void write_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- int i, unsigned long v)
-{
- if (i)
- so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
- else
- so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
-}
-
-static void write_data(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- unsigned char const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i++)
- write_reg(sohandle, so, 1, data[i]);
-}
-
-static unsigned long read_device_code(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long device_code;
-
- /* access protect OFF */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* deep standby OFF */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* device code command */
- write_reg(sohandle, so, 0, 0xbf);
- mdelay(50);
-
- /* dummy read */
- read_reg(sohandle, so);
-
- /* read device code */
- device_code = ((read_reg(sohandle, so) & 0xff) << 24);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
- device_code |= (read_reg(sohandle, so) & 0xff);
-
- return device_code;
-}
-
-static void write_memory_start(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_reg(sohandle, so, 0, 0x2c);
-}
-
-static void clear_memory(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- int i;
-
- /* write start */
- write_memory_start(sohandle, so);
-
- /* paint it black */
- for (i = 0; i < (240 * 400); i++)
- write_reg(sohandle, so, 1, 0x00);
-}
-
-static void display_on(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* access protect off */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* exit deep standby mode */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* frame memory I/F */
- write_reg(sohandle, so, 0, 0xb3);
- write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
-
- /* display mode and frame memory write mode */
- write_reg(sohandle, so, 0, 0xb4);
- write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
-
- /* panel */
- write_reg(sohandle, so, 0, 0xc0);
- write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
-
- /* timing (normal) */
- write_reg(sohandle, so, 0, 0xc1);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (partial) */
- write_reg(sohandle, so, 0, 0xc2);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (idle) */
- write_reg(sohandle, so, 0, 0xc3);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (source/VCOM/gate driving) */
- write_reg(sohandle, so, 0, 0xc4);
- write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
-
- /* gamma (red) */
- write_reg(sohandle, so, 0, 0xc8);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (green) */
- write_reg(sohandle, so, 0, 0xc9);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (blue) */
- write_reg(sohandle, so, 0, 0xca);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* power (common) */
- write_reg(sohandle, so, 0, 0xd0);
- write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
-
- /* VCOM */
- write_reg(sohandle, so, 0, 0xd1);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x0f);
- write_reg(sohandle, so, 1, 0x02);
-
- /* power (normal) */
- write_reg(sohandle, so, 0, 0xd2);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (partial) */
- write_reg(sohandle, so, 0, 0xd3);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (idle) */
- write_reg(sohandle, so, 0, 0xd4);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- write_reg(sohandle, so, 0, 0xd8);
- write_reg(sohandle, so, 1, 0x77);
- write_reg(sohandle, so, 1, 0x77);
-
- /* TE signal */
- write_reg(sohandle, so, 0, 0x35);
- write_reg(sohandle, so, 1, 0x00);
-
- /* TE signal line */
- write_reg(sohandle, so, 0, 0x44);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
-
- /* column address */
- write_reg(sohandle, so, 0, 0x2a);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0xef);
-
- /* page address */
- write_reg(sohandle, so, 0, 0x2b);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x01);
- write_reg(sohandle, so, 1, 0x8f);
-
- /* exit sleep mode */
- write_reg(sohandle, so, 0, 0x11);
-
- mdelay(120);
-
- /* clear vram */
- clear_memory(sohandle, so);
-
- /* display ON */
- write_reg(sohandle, so, 0, 0x29);
- mdelay(1);
-
- write_memory_start(sohandle, so);
-}
-
-int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* power on */
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
- gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
- udelay(1100);
- gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
- udelay(10);
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- mdelay(20);
-
- if (read_device_code(sohandle, so) != 0x01221517)
- return -ENODEV;
-
- pr_info("KFR2R09 WQVGA LCD Module detected.\n");
-
- display_on(sohandle, so);
- return 0;
-}
-
-void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_memory_start(sohandle, so);
-}
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
deleted file mode 100644
index f1b8985cb9223c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/sdram.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * KFR2R09 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(kfr2r09_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_enter_end)
-
- .balign 4
-ENTRY(kfr2r09_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
- ED 0xFD000020, 0x011B0002 /* DBCONF */
- ED 0xFD000030, 0x03060E02 /* DBTR0 */
- ED 0xFD000034, 0x01020102 /* DBTR1 */
- ED 0xFD000038, 0x01090406 /* DBTR2 */
- ED 0xFD000008, 0x00000004 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
- WAIT 1
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
- ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
deleted file mode 100644
index 20f4db778ed6ae..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 board support code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_data/lv5207lp.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach/kfr2r09.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/rj54n1cb0c.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* set VIO_CKO clock to 25MHz */
-#define CEU_MCLK_FREQ 25000000
-#define DRVCRB 0xA405018C
-
-static struct mtd_partition kfr2r09_nor_flash_partitions[] =
-{
- {
- .name = "boot",
- .offset = 0,
- .size = (4 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data kfr2r09_nor_flash_data = {
- .width = 2,
- .parts = kfr2r09_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
-};
-
-static struct resource kfr2r09_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nor_flash_device = {
- .name = "physmap-flash",
- .resource = kfr2r09_nor_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
- .dev = {
- .platform_data = &kfr2r09_nor_flash_data,
- },
-};
-
-static struct resource kfr2r09_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x10000000,
- .end = 0x1001ffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nand_flash_device = {
- .name = "onenand-flash",
- .resource = kfr2r09_nand_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
-};
-
-static struct sh_keysc_info kfr2r09_sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 10,
- .keycodes = {
- KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
- KEY_1, KEY_2, KEY_3, 0, KEY_UP,
- KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
- KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
- KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
- 0, 0, 0, 0, 0
- },
-};
-
-static struct resource kfr2r09_sh_keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
- .resource = kfr2r09_sh_keysc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_keysc_info,
- },
-};
-
-static const struct fb_videomode kfr2r09_lcdc_modes[] = {
- {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
-};
-
-static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS18,
- .clock_divider = 6,
- .flags = LCDC_FLAGS_DWPOL,
- .lcd_modes = kfr2r09_lcdc_modes,
- .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
- .panel_cfg = {
- .width = 35,
- .height = 58,
- .setup_sys = kfr2r09_lcd_setup,
- .start_transfer = kfr2r09_lcd_start,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x07010904,
- .ldmt3r = 0x14012914,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-};
-
-static struct resource kfr2r09_sh_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
- .resource = kfr2r09_sh_lcdc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_lcdc_info,
- },
-};
-
-static struct lv5207lp_platform_data kfr2r09_backlight_data = {
- .fbdev = &kfr2r09_sh_lcdc_device.dev,
- .def_value = 13,
- .max_value = 13,
-};
-
-static struct i2c_board_info kfr2r09_backlight_board_info = {
- I2C_BOARD_INFO("lv5207lp", 0x75),
- .platform_data = &kfr2r09_backlight_data,
-};
-
-static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource kfr2r09_usb0_gadget_resources[] = {
- [0] = {
- .start = 0x04d80000,
- .end = 0x04d80123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device kfr2r09_usb0_gadget_device = {
- .name = "r8a66597_udc",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &kfr2r09_usb0_gadget_data,
- },
- .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
- .resource = kfr2r09_usb0_gadget_resources,
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = rj54n1cb0c */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x50,
- },
- },
-};
-
-static struct resource kfr2r09_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
- .resource = kfr2r09_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-static struct rj54n1_pdata rj54n1_priv = {
- .mclk_freq = CEU_MCLK_FREQ,
- .ioctl_high = false,
-};
-
-static struct i2c_board_info kfr2r09_i2c_camera = {
- I2C_BOARD_INFO("rj54n1cb0c", 0x50),
- .platform_data = &rj54n1_priv,
-};
-
-static struct gpiod_lookup_table rj54n1_gpios = {
- .dev_id = "1-0050",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource kfr2r09_sh_sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
- .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
-};
-
-static struct platform_device kfr2r09_sh_sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
- .resource = kfr2r09_sh_sdhi0_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct platform_device *kfr2r09_devices[] __initdata = {
- &kfr2r09_nor_flash_device,
- &kfr2r09_nand_flash_device,
- &kfr2r09_sh_keysc_device,
- &kfr2r09_sh_lcdc_device,
- &kfr2r09_sh_sdhi0_device,
-};
-
-#define BSC_CS0BCR 0xfec10004
-#define BSC_CS0WCR 0xfec10024
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS4WCR 0xfec10030
-#define PORT_MSELCRB 0xa4050182
-
-#ifdef CONFIG_I2C
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 1);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 6);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-#else
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- return -ENODEV;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- return -ENODEV;
-}
-#endif
-
-static int kfr2r09_usb0_gadget_setup(void)
-{
- int plugged_in;
-
- gpio_request(GPIO_PTN4, NULL); /* USB_DET */
- gpio_direction_input(GPIO_PTN4);
- plugged_in = gpio_get_value(GPIO_PTN4);
- if (!plugged_in)
- return -ENODEV; /* no cable plugged in */
-
- if (kfr2r09_usb0_gadget_i2c_setup() != 0)
- return -ENODEV; /* unable to configure using i2c */
-
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
- gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
- gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
- gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
- msleep(20); /* wait 20ms to let the clock settle */
- clk_enable(clk_get(NULL, "usb0"));
- __raw_writew(0x0600, 0xa40501d4);
-
- return 0;
-}
-
-extern char kfr2r09_sdram_enter_start;
-extern char kfr2r09_sdram_enter_end;
-extern char kfr2r09_sdram_leave_start;
-extern char kfr2r09_sdram_leave_end;
-
-static int __init kfr2r09_devices_setup(void)
-{
- struct clk *camera_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &kfr2r09_sdram_enter_start,
- &kfr2r09_sdram_enter_end,
- &kfr2r09_sdram_leave_start,
- &kfr2r09_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* enable SCIF1 serial port for YC401 console support */
- gpio_request(GPIO_FN_SCIF1_RXD, NULL);
- gpio_request(GPIO_FN_SCIF1_TXD, NULL);
- kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
- gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
- gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
-
- /* setup NOR flash at CS0 */
- __raw_writel(0x36db0400, BSC_CS0BCR);
- __raw_writel(0x00000500, BSC_CS0WCR);
-
- /* setup NAND flash at CS4 */
- __raw_writel(0x36db0400, BSC_CS4BCR);
- __raw_writel(0x00000500, BSC_CS4WCR);
-
- /* setup KEYSC pins */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* setup LCDC pins for SYS panel */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
- gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
- gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
- gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
- gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
- gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
- gpio_direction_output(GPIO_PTE4, 1);
- gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
- gpio_direction_output(GPIO_PTF4, 1);
- gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* setup USB function */
- if (kfr2r09_usb0_gadget_setup() == 0)
- platform_device_register(&kfr2r09_usb0_gadget_device);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
-
- /* SDHI0 connected to yc304 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
-
- /* Set camera clock frequency and register and alias for rj54n1. */
- camera_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(camera_clk)) {
- clk_set_rate(camera_clk,
- clk_round_rate(camera_clk, CEU_MCLK_FREQ));
- clk_put(camera_clk);
- }
- clk_add_alias(NULL, "1-0050", "video_clk", NULL);
-
- /* set DRVCRB
- *
- * use 1.8 V for VccQ_VIO
- * use 2.85V for VccQ_SR
- */
- __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
-
- gpiod_add_lookup_table(&rj54n1_gpios);
-
- i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&kfr2r09_ceu_device.dev);
- dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&kfr2r09_ceu_device);
-
- return platform_add_devices(kfr2r09_devices,
- ARRAY_SIZE(kfr2r09_devices));
-}
-device_initcall(kfr2r09_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int kfr2r09_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * MD8=1: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init kfr2r09_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_kfr2r09 __initmv = {
- .mv_name = "kfr2r09",
- .mv_mode_pins = kfr2r09_mode_pins,
- .mv_mem_reserve = kfr2r09_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
deleted file mode 100644
index 6cba041fffe0f3..00000000000000
--- a/arch/sh/boards/mach-landisk/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
-#
-
-obj-y := setup.o irq.o psw.o gio.o
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
deleted file mode 100644
index ff2200fec29a76..00000000000000
--- a/arch/sh/boards/mach-landisk/gio.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- * Copylight (C) 2006 kogiidena
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <mach-landisk/mach/gio.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-#define DEVCOUNT 4
-#define GIO_MINOR 2 /* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
- int ret = -ENOENT;
-
- preempt_disable();
- if (minor < DEVCOUNT) {
- if (openCnt > 0) {
- ret = -EALREADY;
- } else {
- openCnt++;
- ret = 0;
- }
- }
- preempt_enable();
- return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
-
- if (minor < DEVCOUNT) {
- openCnt--;
- }
- return 0;
-}
-
-static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- unsigned int data;
- static unsigned int addr = 0;
-
- if (cmd & 0x01) { /* write */
- if (copy_from_user(&data, (int *)arg, sizeof(int))) {
- return -EFAULT;
- }
- }
-
- switch (cmd) {
- case GIODRV_IOCSGIOSETADDR: /* address set */
- addr = data;
- break;
-
- case GIODRV_IOCSGIODATA1: /* write byte */
- __raw_writeb((unsigned char)(0x0ff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA2: /* write word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- __raw_writew((unsigned short int)(0x0ffff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA4: /* write long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- __raw_writel(data, addr);
- break;
-
- case GIODRV_IOCGGIODATA1: /* read byte */
- data = __raw_readb(addr);
- break;
-
- case GIODRV_IOCGGIODATA2: /* read word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- data = __raw_readw(addr);
- break;
-
- case GIODRV_IOCGGIODATA4: /* read long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- data = __raw_readl(addr);
- break;
- default:
- return -EFAULT;
- break;
- }
-
- if ((cmd & 0x01) == 0) { /* read */
- if (copy_to_user((int *)arg, &data, sizeof(int))) {
- return -EFAULT;
- }
- }
- return 0;
-}
-
-static const struct file_operations gio_fops = {
- .owner = THIS_MODULE,
- .open = gio_open, /* open */
- .release = gio_close, /* release */
- .unlocked_ioctl = gio_ioctl,
- .llseek = noop_llseek,
-};
-
-static int __init gio_init(void)
-{
- int error;
-
- printk(KERN_INFO "gio: driver initialized\n");
-
- openCnt = 0;
-
- if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
- printk(KERN_ERR
- "gio: Couldn't alloc_chrdev_region, error=%d\n",
- error);
- return 1;
- }
-
- cdev_p = cdev_alloc();
- cdev_p->ops = &gio_fops;
- error = cdev_add(cdev_p, dev, DEVCOUNT);
- if (error) {
- printk(KERN_ERR
- "gio: Couldn't cdev_add, error=%d\n", error);
- return 1;
- }
-
- return 0;
-}
-
-static void __exit gio_exit(void)
-{
- cdev_del(cdev_p);
- unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
deleted file mode 100644
index 0b672b80c56179..00000000000000
--- a/arch/sh/boards/mach-landisk/irq.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- * Copyright (C) 2011 Nobuhiro Iwamatsu
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-enum {
- UNUSED = 0,
-
- PCI_INTA, /* PCI int A */
- PCI_INTB, /* PCI int B */
- PCI_INTC, /* PCI int C */
- PCI_INTD, /* PCI int D */
- ATA, /* ATA */
- FATA, /* CF */
- POWER, /* Power switch */
- BUTTON, /* Button switch */
-};
-
-/* Vectors for LANDISK */
-static struct intc_vect vectors_landisk[] __initdata = {
- INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
- INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
- INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
- INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
- INTC_IRQ(ATA, IRQ_ATA),
- INTC_IRQ(FATA, IRQ_FATA),
- INTC_IRQ(POWER, IRQ_POWER),
- INTC_IRQ(BUTTON, IRQ_BUTTON),
-};
-
-/* IRLMSK mask register layout for LANDISK */
-static struct intc_mask_reg mask_registers_landisk[] __initdata = {
- { PA_IMASK, 0, 8, /* IRLMSK */
- { BUTTON, POWER, FATA, ATA,
- PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
- }
- },
-};
-
-static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
- mask_registers_landisk, NULL, NULL);
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
- register_intc_controller(&intc_desc_landisk);
- __raw_writeb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
deleted file mode 100644
index e171d9af48f3df..00000000000000
--- a/arch/sh/boards/mach-landisk/psw.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007 Paul Mundt
- * Copyright (C) 2007 kogiidena
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int sw_value;
- int ret = 0;
-
- sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- /* Figure out who raised it */
- if (sw_value & (1 << psw_info->bit)) {
- psw->state = 1;
- mod_timer(&psw->debounce, jiffies + 50);
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- __raw_writeb(0x00, PA_PWRINT_CLR);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
- [0] = {
- .start = IRQ_POWER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource psw_usl5p_resources[] = {
- [0] = {
- .start = IRQ_BUTTON,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
- .name = "psw_power",
- .bit = 4,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
- .name = "psw1",
- .bit = 0,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
- .name = "psw2",
- .bit = 2,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
- .name = "psw3",
- .bit = 1,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_power_resources),
- .resource = psw_power_resources,
- .dev = {
- .platform_data = &psw_power_platform_data,
- },
-};
-
-static struct platform_device psw1_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw1_platform_data,
- },
-};
-
-static struct platform_device psw2_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw2_platform_data,
- },
-};
-
-static struct platform_device psw3_switch_device = {
- .name = "push-switch",
- .id = 3,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw3_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &psw_power_switch_device,
- &psw1_switch_device,
- &psw2_switch_device,
- &psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-device_initcall(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
deleted file mode 100644
index 2c44b94f82fb27..00000000000000
--- a/arch/sh/boards/mach-landisk/setup.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/io.h>
-
-static void landisk_power_off(void)
-{
- __raw_writeb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "rs5c313",
- .id = -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
- &cf_ide_device,
- &rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
- cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f;
- cf_ide_resources[0].flags = IORESOURCE_IO;
- cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
- cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03;
- cf_ide_resources[1].flags = IORESOURCE_IO;
- cf_ide_resources[2].start = IRQ_FATA;
- cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
- return platform_add_devices(landisk_devices,
- ARRAY_SIZE(landisk_devices));
-}
-
-device_initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
- /* I/O port identity mapping */
- __set_io_port_base(0);
-
- /* LED ON */
- __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
-
- printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
- pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
- .mv_name = "LANDISK",
- .mv_setup = landisk_setup,
- .mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/mach-lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
deleted file mode 100644
index 0fbd0822911a49..00000000000000
--- a/arch/sh/boards/mach-lboxre2/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the L-BOX RE2 specific parts of the kernel
-# Copyright (c) 2007 Nobuhiro Iwamatsu
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
deleted file mode 100644
index a250e3b9019de1..00000000000000
--- a/arch/sh/boards/mach-lboxre2/irq.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lboxre2/irq.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach/lboxre2.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_lboxre2_IRQ(void)
-{
- make_imask_irq(IRQ_CF1);
- make_imask_irq(IRQ_CF0);
- make_imask_irq(IRQ_INTD);
- make_imask_irq(IRQ_ETH1);
- make_imask_irq(IRQ_ETH0);
- make_imask_irq(IRQ_INTA);
-}
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
deleted file mode 100644
index 20d01b430f2a81..00000000000000
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lbox/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <asm/addrspace.h>
-#include <mach/lboxre2.h>
-#include <asm/io.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRQ_CF0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *lboxre2_devices[] __initdata = {
- &cf_ide_device,
-};
-
-static int __init lboxre2_devices_setup(void)
-{
- u32 cf0_io_base; /* Boot CF base address */
- pgprot_t prot;
- unsigned long paddrbase, psize;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void*)PA_AREA5_IO);
- psize = PAGE_SIZE;
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
- if (!cf0_io_base) {
- printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
- return -ENOMEM;
- }
-
- cf_ide_resources[0].start += cf0_io_base ;
- cf_ide_resources[0].end += cf0_io_base ;
- cf_ide_resources[1].start += cf0_io_base ;
- cf_ide_resources[1].end += cf0_io_base ;
-
- return platform_add_devices(lboxre2_devices,
- ARRAY_SIZE(lboxre2_devices));
-
-}
-device_initcall(lboxre2_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_lboxre2 __initmv = {
- .mv_name = "L-BOX RE2",
- .mv_init_irq = init_lboxre2_IRQ,
-};
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
deleted file mode 100644
index 05c5698dcad025..00000000000000
--- a/arch/sh/boards/mach-microdev/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
deleted file mode 100644
index 2a04f72dd14577..00000000000000
--- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup for the SMSC FDC37C93xAPM
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach/microdev.h>
-
-#define SMSC_CONFIG_PORT_ADDR (0x3F0)
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
-#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
-#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
-#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
-#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
-#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
-#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE 0x03f8
-#define SERIAL2_PRIMARY_BASE 0x02f8
-
-#define MSB(x) ( (x) >> 8 )
-#define LSB(x) ( (x) & 0xff )
-
- /* General-Purpose base address on CPU-board FPGA */
-#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
-
-static int __init smsc_superio_setup(void)
-{
-
- unsigned char devid, devrev;
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-
- if ((devid == 0x30) && (devrev == 0x01))
- printk("SMSC FDC37C93xAPM SuperIO device detected\n");
- else
- return -ENODEV;
-
- /* Select the keyboard device */
- SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
- /* Select the Serial #1 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the Serial #2 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#1 device */
- SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#2 device */
- SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the configuration registers */
- SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
- /* enable the appropriate GPIO pins for IDE functionality:
- * bit[0] In/Out 1==input; 0==output
- * bit[1] Polarity 1==invert; 0==no invert
- * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
- * bit[3:4] Function Select 00==original; 01==Alternate Function #1
- */
- SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
- SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e63dc..00000000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
- /*
- * we need to have a 'safe' address to re-direct all I/O requests
- * that we do not explicitly wish to handle. This safe address
- * must have the following properies:
- *
- * * writes are ignored (no exception)
- * * reads are benign (no side-effects)
- * * accesses of width 1, 2 and 4-bytes are all valid.
- *
- * The Processor Version Register (PVR) has these properties.
- */
-#define PVR 0xff000030 /* Processor Version Register */
-
-
-#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */
-#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */
-#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT 0x10ul
-
-#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */
-#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
-#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
- unsigned long result;
-
- if ((offset >= IO_LAN91C111_BASE) &&
- (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * SMSC LAN91C111 Ethernet chip
- */
- result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
- } else if ((offset >= IO_SUPERIO_BASE) &&
- (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Configuration Registers
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE1_BASE) &&
- (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE1_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE2_BASE) &&
- (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE2_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL1_BASE) &&
- (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL2_BASE) &&
- (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_ISP1161_BASE) &&
- (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
- /*
- * Philips USB ISP1161x chip
- */
- result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
- } else {
- /*
- * safe default.
- */
- printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __func__, offset);
- result = PVR;
- }
-
- return (void __iomem *)result;
-}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
deleted file mode 100644
index dc27492c83d765..00000000000000
--- a/arch/sh/boards/mach-microdev/irq.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
-
-static const struct {
- unsigned char fpgaIrq;
- unsigned char mapped;
- const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
- { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */
- { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */
- { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */
- { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */
- { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */
- { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */
- { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */
- { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */
- { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */
- { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */
- { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */
- { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */
- { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */
- { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */
- { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */
- { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-# error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-# error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-# error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-# error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-# error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-# error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void disable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned int fpgaIrq;
-
- if (irq >= NUM_EXTERNAL_IRQS)
- return;
- if (!fpgaIrqTable[irq].mapped)
- return;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long priorityReg, priorities, pri;
- unsigned int fpgaIrq;
-
- if (unlikely(irq >= NUM_EXTERNAL_IRQS))
- return;
- if (unlikely(!fpgaIrqTable[irq].mapped))
- return;
-
- pri = 15 - irq;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
- priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
- /* set priority for the interrupt */
- priorities = __raw_readl(priorityReg);
- priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
- priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
- __raw_writel(priorities, priorityReg);
-
- /* enable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-static struct irq_chip microdev_irq_type = {
- .name = "MicroDev-IRQ",
- .irq_unmask = enable_microdev_irq,
- .irq_mask = disable_microdev_irq,
-};
-
-/* This function sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler(irq, µdev_irq_type, handle_level_irq);
- disable_microdev_irq(irq_get_irq_data(irq));
-}
-
-extern void __init init_microdev_irq(void)
-{
- int i;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
- for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
- make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
- volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
- volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
- volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
- volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
- volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
- volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
- volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
- volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
- printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
- printk("FPGA_INTENB = 0x%08x\n", *intenb);
- printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
- printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
- printk("FPGA_INTREQ = 0x%08x\n", *intreq);
- printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
- printk("-------------------------------------------------------------------------------\n");
-}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
deleted file mode 100644
index f4a777fe2d0121..00000000000000
--- a/arch/sh/boards/mach-microdev/setup.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <mach/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x300,
- .end = 0x300 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MICRODEV_LINUX_IRQ_ETHERNET,
- .end = MICRODEV_LINUX_IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
- { S1DREG_MISC, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x00 },
- { S1DREG_GPIO_CNF0, 0x00 },
- { S1DREG_GPIO_CNF1, 0x00 },
- { S1DREG_GPIO_CTL0, 0x00 },
- { S1DREG_GPIO_CTL1, 0x00 },
- { S1DREG_CLK_CNF, 0x02 },
- { S1DREG_LCD_CLK_CNF, 0x01 },
- { S1DREG_CRT_CLK_CNF, 0x03 },
- { S1DREG_MPLUG_CLK_CNF, 0x03 },
- { S1DREG_CPU2MEM_WST_SEL, 0x02 },
- { S1DREG_SDRAM_REF_RATE, 0x03 },
- { S1DREG_SDRAM_TC0, 0x00 },
- { S1DREG_SDRAM_TC1, 0x01 },
- { S1DREG_MEM_CNF, 0x80 },
- { S1DREG_PANEL_TYPE, 0x25 },
- { S1DREG_MOD_RATE, 0x00 },
- { S1DREG_LCD_DISP_HWIDTH, 0x63 },
- { S1DREG_LCD_NDISP_HPER, 0x1e },
- { S1DREG_TFT_FPLINE_START, 0x06 },
- { S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
- { S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
- { S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
- { S1DREG_LCD_NDISP_VPER, 0x00 },
- { S1DREG_TFT_FPFRAME_START, 0x0a },
- { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
- { S1DREG_LCD_DISP_MODE, 0x03 },
- { S1DREG_LCD_MISC, 0x00 },
- { S1DREG_LCD_DISP_START0, 0x00 },
- { S1DREG_LCD_DISP_START1, 0x00 },
- { S1DREG_LCD_DISP_START2, 0x00 },
- { S1DREG_LCD_MEM_OFF0, 0x90 },
- { S1DREG_LCD_MEM_OFF1, 0x01 },
- { S1DREG_LCD_PIX_PAN, 0x00 },
- { S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
- { S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
- { S1DREG_CRT_DISP_HWIDTH, 0x63 },
- { S1DREG_CRT_NDISP_HPER, 0x1f },
- { S1DREG_CRT_HRTC_START, 0x04 },
- { S1DREG_CRT_HRTC_PWIDTH, 0x8f },
- { S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
- { S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
- { S1DREG_CRT_NDISP_VPER, 0x1b },
- { S1DREG_CRT_VRTC_START, 0x00 },
- { S1DREG_CRT_VRTC_PWIDTH, 0x83 },
- { S1DREG_TV_OUT_CTL, 0x10 },
- { S1DREG_CRT_DISP_MODE, 0x05 },
- { S1DREG_CRT_DISP_START0, 0x00 },
- { S1DREG_CRT_DISP_START1, 0x00 },
- { S1DREG_CRT_DISP_START2, 0x00 },
- { S1DREG_CRT_MEM_OFF0, 0x20 },
- { S1DREG_CRT_MEM_OFF1, 0x03 },
- { S1DREG_CRT_PIX_PAN, 0x00 },
- { S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
- { S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
- { S1DREG_LCD_CUR_CTL, 0x00 },
- { S1DREG_LCD_CUR_START, 0x01 },
- { S1DREG_LCD_CUR_XPOS0, 0x00 },
- { S1DREG_LCD_CUR_XPOS1, 0x00 },
- { S1DREG_LCD_CUR_YPOS0, 0x00 },
- { S1DREG_LCD_CUR_YPOS1, 0x00 },
- { S1DREG_LCD_CUR_BCTL0, 0x00 },
- { S1DREG_LCD_CUR_GCTL0, 0x00 },
- { S1DREG_LCD_CUR_RCTL0, 0x00 },
- { S1DREG_LCD_CUR_BCTL1, 0x1f },
- { S1DREG_LCD_CUR_GCTL1, 0x3f },
- { S1DREG_LCD_CUR_RCTL1, 0x1f },
- { S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
- { S1DREG_CRT_CUR_CTL, 0x00 },
- { S1DREG_CRT_CUR_START, 0x01 },
- { S1DREG_CRT_CUR_XPOS0, 0x00 },
- { S1DREG_CRT_CUR_XPOS1, 0x00 },
- { S1DREG_CRT_CUR_YPOS0, 0x00 },
- { S1DREG_CRT_CUR_YPOS1, 0x00 },
- { S1DREG_CRT_CUR_BCTL0, 0x00 },
- { S1DREG_CRT_CUR_GCTL0, 0x00 },
- { S1DREG_CRT_CUR_RCTL0, 0x00 },
- { S1DREG_CRT_CUR_BCTL1, 0x1f },
- { S1DREG_CRT_CUR_GCTL1, 0x3f },
- { S1DREG_CRT_CUR_RCTL1, 0x1f },
- { S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
- { S1DREG_BBLT_CTL0, 0x00 },
- { S1DREG_BBLT_CTL1, 0x00 },
- { S1DREG_BBLT_CC_EXP, 0x00 },
- { S1DREG_BBLT_OP, 0x00 },
- { S1DREG_BBLT_SRC_START0, 0x00 },
- { S1DREG_BBLT_SRC_START1, 0x00 },
- { S1DREG_BBLT_SRC_START2, 0x00 },
- { S1DREG_BBLT_DST_START0, 0x00 },
- { S1DREG_BBLT_DST_START1, 0x00 },
- { S1DREG_BBLT_DST_START2, 0x00 },
- { S1DREG_BBLT_MEM_OFF0, 0x00 },
- { S1DREG_BBLT_MEM_OFF1, 0x00 },
- { S1DREG_BBLT_WIDTH0, 0x00 },
- { S1DREG_BBLT_WIDTH1, 0x00 },
- { S1DREG_BBLT_HEIGHT0, 0x00 },
- { S1DREG_BBLT_HEIGHT1, 0x00 },
- { S1DREG_BBLT_BGC0, 0x00 },
- { S1DREG_BBLT_BGC1, 0x00 },
- { S1DREG_BBLT_FGC0, 0x00 },
- { S1DREG_BBLT_FGC1, 0x00 },
- { S1DREG_LKUP_MODE, 0x00 },
- { S1DREG_LKUP_ADDR, 0x00 },
- { S1DREG_PS_CNF, 0x10 },
- { S1DREG_PS_STATUS, 0x00 },
- { S1DREG_CPU2MEM_WDOGT, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
- .initregs = s1d13806_initregs,
- .initregssize = ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
- [0] = {
- .start = 0x07200000,
- .end = 0x07200000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x07000000,
- .end = 0x07000000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device s1d13806_device = {
- .name = "s1d13806fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(s1d13806_resources),
- .resource = s1d13806_resources,
-
- .dev = {
- .platform_data = &s1d13806_platform_data,
- },
-};
-
-static struct platform_device *microdev_devices[] __initdata = {
- &smc91x_device,
- &s1d13806_device,
-};
-
-static int __init microdev_devices_setup(void)
-{
- return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-device_initcall(microdev_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
- .mv_name = "SH4-202 MicroDev",
- .mv_ioport_map = microdev_ioport_map,
- .mv_init_irq = init_microdev_irq,
-};
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
deleted file mode 100644
index fb64a10e217065..00000000000000
--- a/arch/sh/boards/mach-migor/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_MIGOR
-
-choice
- prompt "Migo-R LCD Panel Board Selection"
- default SH_MIGOR_QVGA
-
-config SH_MIGOR_QVGA
- bool "QVGA (320x240)"
-
-config SH_MIGOR_RTA_WVGA
- bool "RTA WVGA (800x480)"
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
deleted file mode 100644
index c223d759fcb1ee..00000000000000
--- a/arch/sh/boards/mach-migor/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
deleted file mode 100644
index 4ebf130510bc6e..00000000000000
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for SuperH MigoR Quarter VGA LCD Panel
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
- * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <cpu/sh7722.h>
-#include <mach/migor.h>
-
-/* LCD Module is a PH240320T according to board schematics. This module
- * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
- * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
- * SYS-80 interface configured in 16 bit mode.
- *
- * Index 0: "Device Code Read" returns 0x1505.
- */
-
-static void reset_lcd_module(void)
-{
- gpio_set_value(GPIO_PTH2, 0);
- mdelay(2);
- gpio_set_value(GPIO_PTH2, 1);
- mdelay(1);
-}
-
-/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
-
-static unsigned long adjust_reg18(unsigned short data)
-{
- unsigned long tmp1, tmp2;
-
- tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
- tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
- return tmp1 | tmp2;
-}
-
-static void write_reg(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
-}
-
-static void write_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
-}
-
-static unsigned long read_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg)
-{
- unsigned long data;
-
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- data = sys_ops->read_data(sys_ops_handle);
- return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
-}
-
-static void migor_lcd_qvga_seq(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i += 2)
- write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
-}
-
-static const unsigned short sync_data[] = {
- 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-};
-
-static const unsigned short magic0_data[] = {
- 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
- 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
- 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
-};
-
-static const unsigned short magic1_data[] = {
- 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
- 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
- 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
- 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
- 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
- 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
- 0x0015, 0x8000,
-};
-
-static const unsigned short magic2_data[] = {
- 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
-};
-
-static const unsigned short magic3_data[] = {
- 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
-};
-
-int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long xres = 320;
- unsigned long yres = 240;
- int k;
-
- reset_lcd_module();
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
-
- if (read_reg16(sohandle, so, 0) != 0x1505)
- return -ENODEV;
-
- pr_info("Migo-R QVGA LCD Module detected.\n");
-
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
- write_reg16(sohandle, so, 0x00A4, 0x0001);
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
- mdelay(100);
-
- migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
- write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
- write_reg16(sohandle, so, 0x0051, 0x00ef);
- write_reg16(sohandle, so, 0x0052, 0x0000);
- write_reg16(sohandle, so, 0x0053, xres - 1);
-
- migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
- mdelay(40);
-
- /* clear GRAM to avoid displaying garbage */
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
-
- for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
- write_reg16(sohandle, so, 0x0022, 0x0000);
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
- write_reg16(sohandle, so, 0x0007, 0x0173);
- mdelay(40);
-
- /* enable display */
- write_reg(sohandle, so, 0x00, 0x22);
- mdelay(100);
- return 0;
-}
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
deleted file mode 100644
index 3a6bee1270aaf7..00000000000000
--- a/arch/sh/boards/mach-migor/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Migo-R sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(migor_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(migor_sdram_enter_end)
-
- .balign 4
-ENTRY(migor_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
deleted file mode 100644
index f60061283c4827..00000000000000
--- a/arch/sh/boards/mach-migor/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/clkdev.h>
-#include <linux/dma-map-ops.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/memblock.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/platnand.h>
-#include <linux/i2c.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smc91x.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/videodev2.h>
-#include <linux/sh_intc.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-#include <media/i2c/tw9910.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-#include <mach/migor.h>
-#include <cpu/sh7722.h>
-
-/* Address IRQ Size Bus Description
- * 0x00000000 64MB 16 NOR Flash (SP29PL256N)
- * 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
- * 0x10000000 IRQ0 16 Ethernet (SMC91C111)
- * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
- * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x10000300,
- .end = 0x1000030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x600), /* IRQ0 */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = {
- 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
- 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
- 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
- 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
- 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = (15 * 1024 * 1024),
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
- .width = 2,
- .parts = migor_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device migor_nor_flash_device = {
- .name = "physmap-flash",
- .resource = migor_nor_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nor_flash_resources),
- .dev = {
- .platform_data = &migor_nor_flash_data,
- },
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
- {
- .name = "nanddata1",
- .offset = 0x0,
- .size = 512 * 1024 * 1024,
- },
- {
- .name = "nanddata2",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024 * 1024,
- },
-};
-
-static void migor_nand_flash_cmd_ctl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00400000);
- else if (ctrl & NAND_ALE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00800000);
- else
- writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct nand_chip *chip)
-{
- return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
-}
-
-static struct platform_nand_data migor_nand_flash_data = {
- .chip = {
- .nr_chips = 1,
- .partitions = migor_nand_flash_partitions,
- .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
- .chip_delay = 20,
- },
- .ctrl = {
- .dev_ready = migor_nand_flash_ready,
- .cmd_ctrl = migor_nand_flash_cmd_ctl,
- },
-};
-
-static struct resource migor_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x18000000,
- .end = 0x18ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device migor_nand_flash_device = {
- .name = "gen_nand",
- .resource = migor_nand_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nand_flash_resources),
- .dev = {
- .platform_data = &migor_nand_flash_data,
- }
-};
-
-static const struct fb_videomode migor_lcd_modes[] = {
- {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 64,
- .right_margin = 16,
- .hsync_len = 120,
- .sync = 0,
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .name = "PH240320T",
- .xres = 320,
- .yres = 240,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .sync = FB_SYNC_HOR_HIGH_ACT,
-#endif
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB16,
- .clock_divider = 2,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .clock_source = LCDC_CLK_PERIPHERAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS16A,
- .clock_divider = 10,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = {
- .width = 49, /* 2.4 inch */
- .height = 37,
- .setup_sys = migor_lcd_qvga_setup,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x06000a09,
- .ldmt3r = 0x180e3418,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-#endif
-};
-
-static struct resource migor_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(migor_lcdc_resources),
- .resource = migor_lcdc_resources,
- .dev = {
- .platform_data = &sh_mobile_lcdc_info,
- },
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = ov772x */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource migor_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(migor_ceu_resources),
- .resource = migor_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT2, "pdn", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource sdhi_cn9_resources[] = {
- [0] = {
- .name = "SDHI",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi_cn9_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
- .resource = sdhi_cn9_resources,
- .dev = {
- .platform_data = &sh7724_sdhi_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = 0,
-};
-
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct i2c_board_info migor_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- },
- {
- I2C_BOARD_INFO("migor_ts", 0x51),
- .irq = evt2irq(0x6c0), /* IRQ6 */
- },
- {
- I2C_BOARD_INFO("wm8978", 0x1a),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
-};
-
-static struct platform_device *migor_devices[] __initdata = {
- &smc91x_eth_device,
- &sh_keysc_device,
- &migor_lcdc_device,
- &migor_nor_flash_device,
- &migor_nand_flash_device,
- &sdhi_cn9_device,
-};
-
-extern char migor_sdram_enter_start;
-extern char migor_sdram_enter_end;
-extern char migor_sdram_leave_start;
-extern char migor_sdram_leave_end;
-
-static int __init migor_devices_setup(void)
-{
- struct clk *video_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &migor_sdram_enter_start,
- &migor_sdram_enter_end,
- &migor_sdram_leave_start,
- &migor_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Let D11 LED show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit D12 LED show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
- gpio_request(GPIO_FN_IRQ0, NULL);
- __raw_writel(0x00003400, BSC_CS4BCR);
- __raw_writel(0x00110080, BSC_CS4WCR);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* NAND Flash */
- gpio_request(GPIO_FN_CS6A_CE2B, NULL);
- __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_input(GPIO_PTA1);
-
- /* SDHI */
- gpio_request(GPIO_FN_SDHICD, NULL);
- gpio_request(GPIO_FN_SDHIWP, NULL);
- gpio_request(GPIO_FN_SDHID3, NULL);
- gpio_request(GPIO_FN_SDHID2, NULL);
- gpio_request(GPIO_FN_SDHID1, NULL);
- gpio_request(GPIO_FN_SDHID0, NULL);
- gpio_request(GPIO_FN_SDHICMD, NULL);
- gpio_request(GPIO_FN_SDHICLK, NULL);
-
- /* Touch Panel */
- gpio_request(GPIO_FN_IRQ6, NULL);
-
- /* LCD Panel */
-#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL);
- gpio_request(GPIO_FN_LCDCS, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDWR, NULL);
- gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
- gpio_direction_output(GPIO_PTH2, 1);
-#endif
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-#endif
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
-
- /* SIU: Port B */
- gpio_request(GPIO_FN_SIUBOLR, NULL);
- gpio_request(GPIO_FN_SIUBOBT, NULL);
- gpio_request(GPIO_FN_SIUBISLD, NULL);
- gpio_request(GPIO_FN_SIUBOSLD, NULL);
- gpio_request(GPIO_FN_SIUMCKB, NULL);
-
- /*
- * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
- * output. Need only SIUB, set to output for master mode (table 34.2)
- */
- __raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
-
- /*
- * Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
- * issues on Panel Board V2.1.
- */
- video_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(video_clk)) {
- clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
- clk_put(video_clk);
- }
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register GPIOs for video sources. */
- gpiod_add_lookup_table(&ov7725_gpios);
- gpiod_add_lookup_table(&tw9910_gpios);
-
- i2c_register_board_info(0, migor_i2c_devices,
- ARRAY_SIZE(migor_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&migor_ceu_device.dev);
- dma_declare_coherent_memory(&migor_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&migor_ceu_device);
-
- return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-arch_initcall(migor_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int migor_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=0: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init migor_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_migor __initmv = {
- .mv_name = "Migo-R",
- .mv_mode_pins = migor_mode_pins,
- .mv_mem_reserve = migor_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
deleted file mode 100644
index 21770e668de283..00000000000000
--- a/arch/sh/boards/mach-r2d/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RTS7751R2D
-
-menu "RTS7751R2D Board Revision"
-
-config RTS7751R2D_PLUS
- bool "R2D-PLUS"
- help
- Selecting this option will configure the kernel for R2D-PLUS.
-
- R2D-PLUS is the smaller of the two R2D board versions, equipped
- with a single PCI slot.
-
-config RTS7751R2D_1
- bool "R2D-1"
- help
- Selecting this option will configure the kernel for R2D-1.
-
- R2D-1 is the larger of the two R2D board versions, equipped
- with two PCI slots.
-endmenu
-
-endif
-
diff --git a/arch/sh/boards/mach-r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
deleted file mode 100644
index 7e7ac5e0566211..00000000000000
--- a/arch/sh/boards/mach-r2d/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the RTS7751R2D specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
deleted file mode 100644
index e34f81e9ae813b..00000000000000
--- a/arch/sh/boards/mach-r2d/irq.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/rts7751r2d/irq.c
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
- *
- * Modified for RTS7751R2D by
- * Atom Create Engineering Co., Ltd. 2002.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-
-#define R2D_NR_IRL 13
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources (R2D-1 and R2D-PLUS) */
- EXT, /* EXT_INT0-3 */
- RTC_T, RTC_A, /* Real Time Clock */
- AX88796, /* Ethernet controller (R2D-1 board) */
- KEY, /* Key input (R2D-PLUS board) */
- SDCARD, /* SD Card */
- CF_CD, CF_IDE, /* CF Card Detect + CF IDE */
- SM501, /* SM501 aka Voyager */
- PCI_INTD_RTL8139, /* Ethernet controller */
- PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
- PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
- PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */
- PCI_INTA_SLOT, /* PCI Slot 3.3v */
- TP, /* Touch Panel */
-};
-
-#ifdef CONFIG_RTS7751R2D_1
-
-/* Vectors for R2D-1 */
-static struct intc_vect vectors_r2d_1[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-1 */
-static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, AX88796,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-1 */
-static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
- NULL, mask_registers_r2d_1, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_1 */
-
-#ifdef CONFIG_RTS7751R2D_PLUS
-
-/* Vectors for R2D-PLUS */
-static struct intc_vect vectors_r2d_plus[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-PLUS */
-static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, KEY,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-PLUS */
-static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
- NULL, mask_registers_r2d_plus, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_PLUS */
-
-static unsigned char irl2irq[R2D_NR_IRL];
-
-int rts7751r2d_irq_demux(int irq)
-{
- if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_rts7751r2d_IRQ(void)
-{
- struct intc_desc *d;
-
- switch (__raw_readw(PA_VERREG) & 0xf0) {
-#ifdef CONFIG_RTS7751R2D_PLUS
- case 0x10:
- printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
- d = &intc_desc_r2d_plus;
- memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
- break;
-#endif
-#ifdef CONFIG_RTS7751R2D_1
- case 0x00: /* according to manual */
- case 0x30: /* in reality */
- printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
- d = &intc_desc_r2d_1;
- memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
- break;
-#endif
- default:
- printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
- __raw_readw(PA_VERREG));
- return;
- }
-
- register_intc_controller(d);
-}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
deleted file mode 100644
index 3bc52f651d9611..00000000000000
--- a/arch/sh/boards/mach-r2d/setup.c
+++ /dev/null
@@ -1,305 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Sales RTS7751R2D Support.
- *
- * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ata_platform.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <asm/machvec.h>
-#include <mach/r2d.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-#include <asm/spi.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c,
- .flags = IORESOURCE_MEM,
- },
-#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
- [2] = {
- .start = IRQ_CF_IDE,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "rtc-r9701",
- .max_speed_hz = 1000000,
- .mode = SPI_MODE_3,
- },
-};
-
-static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
-{
- BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
- __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
-}
-
-static struct sh_spi_info spi_info = {
- .num_chipselect = 1,
- .chip_select = r2d_chip_select,
-};
-
-static struct resource spi_sh_sci_resources[] = {
- {
- .start = 0xffe00000,
- .end = 0xffe0001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device spi_sh_sci_device = {
- .name = "spi_sh_sci",
- .id = -1,
- .num_resources = ARRAY_SIZE(spi_sh_sci_resources),
- .resource = spi_sh_sci_resources,
- .dev = {
- .platform_data = &spi_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OUTPORT,
- .end = PA_OUTPORT,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x13e00000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x13e00000,
- .end = 0x13ffffff,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_VOYAGER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode = {
- .pixclock = 35714,
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .upper_margin = 35,
- .lower_margin = 0,
- .hsync_len = 96,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .flags = (SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT),
-
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
- .flags = SM501_FBPD_SWAP_FB_ENDIAN,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct mtd_partition r2d_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Environment",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(r2d_partitions),
- .parts = r2d_partitions,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x02000000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rts7751r2d_devices[] __initdata = {
- &sm501_device,
- &heartbeat_device,
- &spi_sh_sci_device,
-};
-
-/*
- * The CF is connected with a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init rts7751r2d_devices_setup(void)
-{
- if (register_trapped_io(&cf_trapped_io) == 0)
- platform_device_register(&cf_ide_device);
-
- if (mach_is_r2d_plus())
- platform_device_register(&flash_device);
-
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-
- return platform_add_devices(rts7751r2d_devices,
- ARRAY_SIZE(rts7751r2d_devices));
-}
-device_initcall(rts7751r2d_devices_setup);
-
-static void rts7751r2d_power_off(void)
-{
- __raw_writew(0x0001, PA_POWOFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init rts7751r2d_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
- u16 ver = __raw_readw(PA_VERREG);
-
- printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
-
- printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
- (ver >> 4) & 0xf, ver & 0xf);
-
- __raw_writew(0x0000, PA_OUTPORT);
- pm_power_off = rts7751r2d_power_off;
-
- /* sm501 dram configuration:
- * ColSizeX = 11 - External Memory Column Size: 256 words.
- * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
- * RstX = 1 - External Memory Reset: Normal.
- * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
- * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks.
- * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
- * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
- * Rst = 1 - Internal Memory Reset: Normal.
- * RA = 1 - Internal Memory Remain in Active State: Do not remain.
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rts7751r2d __initmv = {
- .mv_name = "RTS7751R2D",
- .mv_setup = rts7751r2d_setup,
- .mv_init_irq = init_rts7751r2d_IRQ,
- .mv_irq_demux = rts7751r2d_irq_demux,
-};
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
deleted file mode 100644
index f0299bc4416f80..00000000000000
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RSK
-
-choice
- prompt "RSK+ options"
- default SH_RSK7203
-
-config SH_RSK7201
- bool "RSK7201"
- depends on CPU_SUBTYPE_SH7201
-
-config SH_RSK7203
- bool "RSK7203"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7203
-
-config SH_RSK7264
- bool "RSK2+SH7264"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7264
-
-config SH_RSK7269
- bool "RSK2+SH7269"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7269
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
deleted file mode 100644
index 43cca39a9fe612..00000000000000
--- a/arch/sh/boards/mach-rsk/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o
-obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o
-obj-$(CONFIG_SH_RSK7264) += devices-rsk7264.o
-obj-$(CONFIG_SH_RSK7269) += devices-rsk7269.o
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
deleted file mode 100644
index e6b05d4588b7b9..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ 7203 Support.
- *
- * Copyright (C) 2008 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <cpu/sh7203.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct gpio_led rsk7203_gpio_leds[] = {
- {
- .name = "green",
- .gpio = GPIO_PE10,
- .active_low = 1,
- }, {
- .name = "orange",
- .default_trigger = "nand-disk",
- .gpio = GPIO_PE12,
- .active_low = 1,
- }, {
- .name = "red:timer",
- .default_trigger = "timer",
- .gpio = GPIO_PC14,
- .active_low = 1,
- }, {
- .name = "red:heartbeat",
- .default_trigger = "heartbeat",
- .gpio = GPIO_PE11,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
- .leds = rsk7203_gpio_leds,
- .num_leds = ARRAY_SIZE(rsk7203_gpio_leds),
-};
-
-static struct platform_device led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rsk7203_gpio_leds_info,
- },
-};
-
-static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
- {
- .code = BTN_0,
- .gpio = GPIO_PB0,
- .active_low = 1,
- .desc = "SW1",
- }, {
- .code = BTN_1,
- .gpio = GPIO_PB1,
- .active_low = 1,
- .desc = "SW2",
- }, {
- .code = BTN_2,
- .gpio = GPIO_PB2,
- .active_low = 1,
- .desc = "SW3",
- },
-};
-
-static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
- .buttons = rsk7203_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table),
- .poll_interval = 50, /* default to 50ms */
-};
-
-static struct platform_device keys_device = {
- .name = "gpio-keys-polled",
- .dev = {
- .platform_data = &rsk7203_gpio_keys_info,
- },
-};
-
-static struct platform_device *rsk7203_devices[] __initdata = {
- &smsc911x_device,
- &led_device,
- &keys_device,
-};
-
-static int __init rsk7203_devices_setup(void)
-{
- /* Select pins for SCIF0 */
- gpio_request(GPIO_FN_TXD0, NULL);
- gpio_request(GPIO_FN_RXD0, NULL);
-
- /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
- __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
- gpio_request(GPIO_FN_IRQ0_PB, NULL);
-
- return platform_add_devices(rsk7203_devices,
- ARRAY_SIZE(rsk7203_devices));
-}
-device_initcall(rsk7203_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7264.c b/arch/sh/boards/mach-rsk/devices-rsk7264.c
deleted file mode 100644
index eaf700a20b833e..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7264.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7264 Support.
- *
- * Copyright (C) 2012 Renesas Electronics Europe
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x28000000,
- .end = 0x280000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 65,
- .end = 65,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7264_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7264_devices_setup(void)
-{
- return platform_add_devices(rsk7264_devices,
- ARRAY_SIZE(rsk7264_devices));
-}
-device_initcall(rsk7264_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c
deleted file mode 100644
index 4b1e386b51dd64..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7269.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7269 Support
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7269_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7269_devices_setup(void)
-{
- return platform_add_devices(rsk7269_devices,
- ARRAY_SIZE(rsk7269_devices));
-}
-device_initcall(rsk7269_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
deleted file mode 100644
index 9370c4fdc41e13..00000000000000
--- a/arch/sh/boards/mach-rsk/setup.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ Support.
- *
- * Copyright (C) 2008 Paul Mundt
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct mtd_partition rsk_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = rsk_partitions,
- .nr_parts = ARRAY_SIZE(rsk_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x20000000,
- .end = 0x20400000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rsk_devices[] __initdata = {
- &flash_device,
-};
-
-static int __init rsk_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(rsk_devices,
- ARRAY_SIZE(rsk_devices));
-}
-device_initcall(rsk_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk __initmv = {
- .mv_name = "RSK+",
-};
diff --git a/arch/sh/boards/mach-sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
deleted file mode 100644
index d4392efd2f74db..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_SDK7780
-
-choice
- prompt "SDK7780 options"
- default SH_SDK7780_BASE
-
-config SH_SDK7780_BASE
- bool "SDK7780 with base-board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the expansion
- baseboard devices. If in doubt, say Y.
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
deleted file mode 100644
index 37e857f9a55a26..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SDK7780 specific parts of the kernel
-#
-obj-y := setup.o irq.o
-
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
deleted file mode 100644
index fa392f3dce266b..00000000000000
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sdk7780/irq.c
- *
- * Renesas Technology Europe SDK7780 Support.
- *
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/sdk7780.h>
-
-enum {
- UNUSED = 0,
- /* board specific interrupt sources */
- SMC91C111, /* Ethernet controller */
-};
-
-static struct intc_vect fpga_vectors[] __initdata = {
- INTC_IRQ(SMC91C111, IRQ_ETHERNET),
-};
-
-static struct intc_mask_reg fpga_mask_registers[] __initdata = {
- { 0, FPGA_IRQ0MR, 16,
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
- NULL, fpga_mask_registers, NULL, NULL);
-
-void __init init_sdk7780_IRQ(void)
-{
- printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
-
- __raw_writew(0xFFFF, FPGA_IRQ0MR);
- /* Setup IRL 0-3 */
- __raw_writew(0x0003, FPGA_IMSR);
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- register_intc_controller(&fpga_intc_desc);
-}
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
deleted file mode 100644
index 482761b780e406..00000000000000
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/sdk7780/setup.c
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <mach/sdk7780.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#define GPIO_PECR 0xFFEA0008
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ETHERNET,
- .end = IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *sdk7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init sdk7780_devices_setup(void)
-{
- return platform_add_devices(sdk7780_devices,
- ARRAY_SIZE(sdk7780_devices));
-}
-device_initcall(sdk7780_devices_setup);
-
-static void __init sdk7780_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(FPGA_FPVERR);
- u16 dateStamp = __raw_readw(FPGA_FPDATER);
-
- printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d), datestamp : %d\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf,
- dateStamp);
-
- /* Setup pin mux'ing for PCIC */
- __raw_writew(0x0000, GPIO_PECR);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Renesas SDK7780-R3" ,
- .mv_setup = sdk7780_setup,
- .mv_init_irq = init_sdk7780_IRQ,
-};
-
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
deleted file mode 100644
index 731a87c694b3bc..00000000000000
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := fpga.o irq.o nmi.o setup.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
deleted file mode 100644
index a37e1e88c6b1f2..00000000000000
--- a/arch/sh/boards/mach-sdk7786/fpga.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/bcd.h>
-#include <mach/fpga.h>
-#include <linux/sizes.h>
-
-#define FPGA_REGS_OFFSET 0x03fff800
-#define FPGA_REGS_SIZE 0x490
-
-/*
- * The FPGA can be mapped in any of the generally available areas,
- * so we attempt to scan for it using the fixed SRSTR read magic.
- *
- * Once the FPGA is located, the rest of the mapping data for the other
- * components can be determined dynamically from its section mapping
- * registers.
- */
-static void __iomem *sdk7786_fpga_probe(void)
-{
- unsigned long area;
- void __iomem *base;
-
- /*
- * Iterate over all of the areas where the FPGA could be mapped.
- * The possible range is anywhere from area 0 through 6, area 7
- * is reserved.
- */
- for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
- base = ioremap(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
- if (!base) {
- /* Failed to remap this area, move along. */
- continue;
- }
-
- if (ioread16(base + SRSTR) == SRSTR_MAGIC)
- return base; /* Found it! */
-
- iounmap(base);
- }
-
- return NULL;
-}
-
-void __iomem *sdk7786_fpga_base;
-
-void __init sdk7786_fpga_init(void)
-{
- u16 version, date;
-
- sdk7786_fpga_base = sdk7786_fpga_probe();
- if (unlikely(!sdk7786_fpga_base)) {
- panic("FPGA detection failed.\n");
- return;
- }
-
- version = fpga_read_reg(FPGAVR);
- date = fpga_read_reg(FPGADR);
-
- pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
- bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
- ((date >> 12) & 0xf) + 2000,
- (date >> 8) & 0xf, bcd2bin(date & 0xff));
-}
diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c
deleted file mode 100644
index c4587d1013e611..00000000000000
--- a/arch/sh/boards/mach-sdk7786/gpio.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA USRGPIR Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <mach/fpga.h>
-
-#define NR_FPGA_GPIOS 8
-
-static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
- "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
-};
-
-static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- /* always in */
- return 0;
-}
-
-static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
-}
-
-static struct gpio_chip usrgpir_gpio_chip = {
- .label = "sdk7786-fpga",
- .names = usrgpir_gpio_names,
- .direction_input = usrgpir_gpio_direction_input,
- .get = usrgpir_gpio_get,
- .base = -1, /* don't care */
- .ngpio = NR_FPGA_GPIOS,
-};
-
-static int __init usrgpir_gpio_setup(void)
-{
- return gpiochip_add_data(&usrgpir_gpio_chip, NULL);
-}
-device_initcall(usrgpir_gpio_setup);
diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c
deleted file mode 100644
index 340c306ea95239..00000000000000
--- a/arch/sh/boards/mach-sdk7786/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA IRQ Controller Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-
-enum {
- ATA_IRQ_BIT = 1,
- SPI_BUSY_BIT = 2,
- LIRQ5_BIT = 3,
- LIRQ6_BIT = 4,
- LIRQ7_BIT = 5,
- LIRQ8_BIT = 6,
- KEY_IRQ_BIT = 7,
- PEN_IRQ_BIT = 8,
- ETH_IRQ_BIT = 9,
- RTC_ALARM_BIT = 10,
- CRYSTAL_FAIL_BIT = 12,
- ETH_PME_BIT = 14,
-};
-
-void __init sdk7786_init_irq(void)
-{
- unsigned int tmp;
-
- /* Enable priority encoding for all IRLs */
- fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
-
- /* Clear FPGA interrupt status registers */
- fpga_write_reg(0x0000, INTASR);
- fpga_write_reg(0x0000, INTBSR);
-
- /* Unmask FPGA interrupts */
- tmp = fpga_read_reg(INTAMR);
- tmp &= ~(1 << ETH_IRQ_BIT);
- fpga_write_reg(tmp, INTAMR);
-
- plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
deleted file mode 100644
index afba49679a1219..00000000000000
--- a/arch/sh/boards/mach-sdk7786/nmi.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA NMI Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-
-enum {
- NMI_MODE_MANUAL,
- NMI_MODE_AUX,
- NMI_MODE_MASKED,
- NMI_MODE_ANY,
- NMI_MODE_UNKNOWN,
-};
-
-/*
- * Default to the manual NMI switch.
- */
-static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
-
-static int __init nmi_mode_setup(char *str)
-{
- if (!str)
- return 0;
-
- if (strcmp(str, "manual") == 0)
- nmi_mode = NMI_MODE_MANUAL;
- else if (strcmp(str, "aux") == 0)
- nmi_mode = NMI_MODE_AUX;
- else if (strcmp(str, "masked") == 0)
- nmi_mode = NMI_MODE_MASKED;
- else if (strcmp(str, "any") == 0)
- nmi_mode = NMI_MODE_ANY;
- else {
- nmi_mode = NMI_MODE_UNKNOWN;
- pr_warn("Unknown NMI mode %s\n", str);
- }
-
- printk("Set NMI mode to %d\n", nmi_mode);
- return 0;
-}
-early_param("nmi_mode", nmi_mode_setup);
-
-void __init sdk7786_nmi_init(void)
-{
- unsigned int source, mask, tmp;
-
- switch (nmi_mode) {
- case NMI_MODE_MANUAL:
- source = NMISR_MAN_NMI;
- mask = NMIMR_MAN_NMIM;
- break;
- case NMI_MODE_AUX:
- source = NMISR_AUX_NMI;
- mask = NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_ANY:
- source = NMISR_MAN_NMI | NMISR_AUX_NMI;
- mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_MASKED:
- case NMI_MODE_UNKNOWN:
- default:
- source = mask = 0;
- break;
- }
-
- /* Set the NMI source */
- tmp = fpga_read_reg(NMISR);
- tmp &= ~NMISR_MASK;
- tmp |= source;
- fpga_write_reg(tmp, NMISR);
-
- /* And the IRQ masking */
- fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
-}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
deleted file mode 100644
index d183026dbeb19a..00000000000000
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe SDK7786 Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resource = {
- .start = 0x07fff8b0,
- .end = 0x07fff8b0 + sizeof(u16) - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0x07ffff00,
- .end = 0x07ffff00 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource smbus_fpga_resource = {
- .start = 0x07fff9e0,
- .end = 0x07fff9e0 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_fpga_device = {
- .name = "i2c-sdk7786",
- .id = 0,
- .num_resources = 1,
- .resource = &smbus_fpga_resource,
-};
-
-static struct resource smbus_pcie_resource = {
- .start = 0x07fffc30,
- .end = 0x07fffc30 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_pcie_device = {
- .name = "i2c-sdk7786",
- .id = 1,
- .num_resources = 1,
- .resource = &smbus_pcie_resource,
-};
-
-static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
- {
- I2C_BOARD_INFO("max6900", 0x68),
- },
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &smbus_fpga_device,
- &smbus_pcie_device,
-};
-
-static int sdk7786_i2c_setup(void)
-{
- unsigned int tmp;
-
- /*
- * Hand over I2C control to the FPGA.
- */
- tmp = fpga_read_reg(SBCR);
- tmp &= ~SCBR_I2CCEN;
- tmp |= SCBR_I2CMEN;
- fpga_write_reg(tmp, SBCR);
-
- return i2c_register_board_info(0, sdk7786_i2c_devices,
- ARRAY_SIZE(sdk7786_i2c_devices));
-}
-
-static int __init sdk7786_devices_setup(void)
-{
- int ret;
-
- ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return sdk7786_i2c_setup();
-}
-device_initcall(sdk7786_devices_setup);
-
-static int sdk7786_mode_pins(void)
-{
- return fpga_read_reg(MODSWR);
-}
-
-/*
- * FPGA-driven PCIe clocks
- *
- * Historically these include the oscillator, clock B (slots 2/3/4) and
- * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
- * everything under a single PCIe clocks enable bit that happens to map
- * to the same bit position as the oscillator bit for earlier FPGA
- * versions.
- *
- * Given that the legacy clocks have the side-effect of shutting the CPU
- * off through the FPGA along with the PCI slots, we simply leave them in
- * their initial state and don't bother registering them with the clock
- * framework.
- */
-static int sdk7786_pcie_clk_enable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
- return 0;
-}
-
-static void sdk7786_pcie_clk_disable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
-}
-
-static struct sh_clk_ops sdk7786_pcie_clk_ops = {
- .enable = sdk7786_pcie_clk_enable,
- .disable = sdk7786_pcie_clk_disable,
-};
-
-static struct clk sdk7786_pcie_clk = {
- .ops = &sdk7786_pcie_clk_ops,
-};
-
-static struct clk_lookup sdk7786_pcie_cl = {
- .con_id = "pcie_plat_clk",
- .clk = &sdk7786_pcie_clk,
-};
-
-static int sdk7786_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- /*
- * Setup the FPGA clocks.
- */
- ret = clk_register(&sdk7786_pcie_clk);
- if (unlikely(ret)) {
- pr_err("FPGA clock registration failed\n");
- return ret;
- }
-
- clkdev_add(&sdk7786_pcie_cl);
-
- return 0;
-}
-
-static void sdk7786_restart(char *cmd)
-{
- fpga_write_reg(0xa5a5, SRSTR);
-}
-
-static void sdk7786_power_off(void)
-{
- fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
-
- /*
- * It can take up to 20us for the R8C to do its job, back off and
- * wait a bit until we've been shut off. Even though newer FPGA
- * versions don't set the ACK bit, the latency issue remains.
- */
- while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
- cpu_sleep();
-}
-
-/* Initialize the board */
-static void __init sdk7786_setup(char **cmdline_p)
-{
- pr_info("Renesas Technology Europe SDK7786 support:\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- sdk7786_fpga_init();
- sdk7786_nmi_init();
-
- pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
-
- machine_ops.restart = sdk7786_restart;
- pm_power_off = sdk7786_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sdk7786 __initmv = {
- .mv_name = "SDK7786",
- .mv_setup = sdk7786_setup,
- .mv_mode_pins = sdk7786_mode_pins,
- .mv_clk_init = sdk7786_clk_init,
- .mv_init_irq = sdk7786_init_irq,
-};
diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c
deleted file mode 100644
index 7c6ca976f332fe..00000000000000
--- a/arch/sh/boards/mach-sdk7786/sram.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA SRAM Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-#include <asm/sram.h>
-#include <linux/sizes.h>
-
-static int __init fpga_sram_init(void)
-{
- unsigned long phys;
- unsigned int area;
- void __iomem *vaddr;
- int ret;
- u16 data;
-
- /* Enable FPGA SRAM */
- data = fpga_read_reg(LCLASR);
- data |= LCLASR_FRAMEN;
- fpga_write_reg(data, LCLASR);
-
- /*
- * FPGA_SEL determines the area mapping
- */
- area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
- if (unlikely(area == LCLASR_AREA_MASK)) {
- pr_err("FPGA memory unmapped.\n");
- return -ENXIO;
- }
-
- /*
- * The memory itself occupies a 2KiB range at the top of the area
- * immediately below the system registers.
- */
- phys = (area << 26) + SZ_64M - SZ_4K;
-
- /*
- * The FPGA SRAM resides in translatable physical space, so set
- * up a mapping prior to inserting it in to the pool.
- */
- vaddr = ioremap(phys, SZ_2K);
- if (unlikely(!vaddr)) {
- pr_err("Failed remapping FPGA memory.\n");
- return -ENXIO;
- }
-
- pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
- "(area %d) to pool.\n",
- SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
-
- ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
- if (unlikely(ret < 0)) {
- pr_err("Failed adding memory\n");
- iounmap(vaddr);
- return ret;
- }
-
- return 0;
-}
-postcore_initcall(fpga_sram_init);
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
deleted file mode 100644
index b40b30853ce376..00000000000000
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7206 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
deleted file mode 100644
index 2b15370829aef3..00000000000000
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <mach-se/mach/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL 0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1 0xfffe0802
-
-static void disable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set the priority in IPR to 0 */
- val = __raw_readw(INTC_IPR01);
- val &= mask;
- __raw_writew(val, INTC_IPR01);
- /* FPGA mask set */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 |= 0x0010;
- break;
- case IRQ1_IRQ:
- msk0 |= 0x000f;
- break;
- case IRQ3_IRQ:
- msk0 |= 0x0f00;
- msk1 |= 0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set priority in IPR back to original value */
- val = __raw_readw(INTC_IPR01);
- val |= value;
- __raw_writew(val, INTC_IPR01);
-
- /* FPGA mask reset */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- msk0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- msk0 &= ~0x0f00;
- msk1 &= ~0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(struct irq_data *data)
-{
- unsigned short sts0,sts1;
- unsigned int irq = data->irq;
-
- if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
- enable_se7206_irq(data);
- /* FPGA isr clear */
- sts0 = __raw_readw(INTSTS0);
- sts1 = __raw_readw(INTSTS1);
-
- switch (irq) {
- case IRQ0_IRQ:
- sts0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- sts0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- sts0 &= ~0x0f00;
- sts1 &= ~0x00ff;
- break;
- }
- __raw_writew(sts0, INTSTS0);
- __raw_writew(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
- .name = "SE7206-FPGA",
- .irq_mask = disable_se7206_irq,
- .irq_unmask = enable_se7206_irq,
- .irq_eoi = eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
- handle_level_irq, "level");
- disable_se7206_irq(irq_get_irq_data(irq));
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
- make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
- make_se7206_irq(IRQ1_IRQ); /* ATA */
- make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-
- __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
-
- /* FPGA System register setup*/
- __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
- __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
-
- /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- __raw_writew(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
deleted file mode 100644
index dc55d3a69665ee..00000000000000
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2007 - 2008 Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <mach-se/mach/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = PA_SMSC + 0x300,
- .end = PA_SMSC + 0x300 + 0x020 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
- &smc91x_device,
- &heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
- return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-device_initcall(se7206_devices_setup);
-
-static int se7206_mode_pins(void)
-{
- return MODE_PIN1 | MODE_PIN2;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_init_irq = init_se7206_IRQ,
- .mv_mode_pins = se7206_mode_pins,
-};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
deleted file mode 100644
index e058661091a26f..00000000000000
--- a/arch/sh/boards/mach-se/7343/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7343 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
deleted file mode 100644
index f9f3b14f70d574..00000000000000
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2012 Paul Mundt
- *
- * Based on linux/arch/sh/boards/se/7343/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#define DRV_NAME "SE7343-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7343.h>
-
-#define PA_CPLD_BASE_ADDR 0x11400000
-#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
-#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-
-static void __iomem *se7343_irq_regs;
-struct irq_domain *se7343_irq_domain;
-
-static void se7343_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
-
- for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7343_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7343_domain_init(void)
-{
- int i;
-
- se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7343_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7343_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7343_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7343_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = PA_CPLD_IMSK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
-{
- se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
- if (unlikely(!se7343_irq_regs)) {
- pr_err("Failed to remap CPLD\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7343_domain_init();
- se7343_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
deleted file mode 100644
index fe0e550601a2e2..00000000000000
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/usb/isp116x.h>
-#include <linux/delay.h>
-#include <linux/irqdomain.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7343.h>
-#include <asm/heartbeat.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 128 * 1024,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 31 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
-
-static struct plat_serial8250_port serial_platform_data[] = {
- [0] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x16000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- [1] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x17000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- { },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static void isp116x_delay(struct device *dev, int delay)
-{
- ndelay(delay);
-}
-
-static struct resource usb_resources[] = {
- [0] = {
- .start = 0x11800000,
- .end = 0x11800001,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x11800002,
- .end = 0x11800003,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp116x_platform_data usb_platform_data = {
- .sel15Kres = 1,
- .oc_enable = 1,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_enable = 0,
- .delay = isp116x_delay,
-};
-
-static struct platform_device usb_device = {
- .name = "isp116x-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(usb_resources),
- .resource = usb_resources,
- .dev = {
- .platform_data = &usb_platform_data,
- },
-
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &uart_device,
- &usb_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
- /* Wire-up dynamic vectors */
- serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTA);
- serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTB);
- usb_resources[2].start = usb_resources[2].end =
- irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
-
- return platform_add_devices(sh7343se_platform_devices,
- ARRAY_SIZE(sh7343se_platform_devices));
-}
-device_initcall(sh7343se_devices_setup);
-
-/*
- * Initialize the board
- */
-static void __init sh7343se_setup(char **cmdline_p)
-{
- __raw_writew(0xf900, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- __raw_writew(0x0020, PORT_PSELD);
-
- printk(KERN_INFO "MS7343CP01 Setup...done\n");
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
- .mv_name = "SolutionEngine 7343",
- .mv_setup = sh7343se_setup,
- .mv_init_irq = init_7343se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
deleted file mode 100644
index 900d93cfb6a531..00000000000000
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 770x SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
deleted file mode 100644
index 66e2c8aa0b69f3..00000000000000
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- /* This is default value */
- { 13, 0, 8, 0x0f-13, },
- { 5 , 0, 4, 0x0f- 5, },
- { 10, 1, 0, 0x0f-10, },
- { 7 , 2, 4, 0x0f- 7, },
- { 3 , 2, 0, 0x0f- 3, },
- { 1 , 3, 12, 0x0f- 1, },
- { 12, 3, 4, 0x0f-12, }, /* LAN */
- { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */
- { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */
- { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */
- { 0 , 5, 12, 0x0f , },
- { 4 , 5, 4, 0x0f- 4, },
- { 8 , 6, 12, 0x0f- 8, },
- { 9 , 6, 8, 0x0f- 9, },
- { 11, 6, 4, 0x0f-11, },
-#else
- { 14, 0, 8, 0x0f-14, },
- { 12, 0, 4, 0x0f-12, },
- { 8, 1, 4, 0x0f- 8, },
- { 6, 2, 12, 0x0f- 6, },
- { 5, 2, 8, 0x0f- 5, },
- { 4, 2, 4, 0x0f- 4, },
- { 3, 2, 0, 0x0f- 3, },
- { 1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
- /* ST NIC */
- { 10, 3, 4, 0x0f-10, }, /* LAN */
-#endif
- /* MRSHPC IRQs setting */
- { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */
- { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */
- { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */
- { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */
- { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "IPR-se770x",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
deleted file mode 100644
index 412326d59e6fce..00000000000000
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sh_eth.h>
-#include <mach-se/mach/se.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CFCARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-/* SH771X Ethernet driver */
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = PHY_ID,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth0_resources[] = {
- [0] = {
- .start = SH_ETH0_BASE,
- .end = SH_ETH0_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH0_IRQ,
- .end = SH_ETH0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth0_device = {
- .name = "sh771x-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .resource = sh_eth0_resources,
-};
-
-static struct resource sh_eth1_resources[] = {
- [0] = {
- .start = SH_ETH1_BASE,
- .end = SH_ETH1_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH1_IRQ,
- .end = SH_ETH1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth1_device = {
- .name = "sh771x-ether",
- .id = 1,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .resource = sh_eth1_resources,
-};
-#endif
-
-static struct platform_device *se_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
- &sh_eth0_device,
- &sh_eth1_device,
-#endif
-};
-
-static int __init se_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_setup = smsc_setup,
- .mv_init_irq = init_se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
deleted file mode 100644
index 09436f10ddf198..00000000000000
--- a/arch/sh/boards/mach-se/7721/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
deleted file mode 100644
index e6ef2a2655c37c..00000000000000
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7721.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
- { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
- NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
- /* PPCR */
- __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
-
- register_intc_controller(&intc_desc);
- intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
deleted file mode 100644
index 3af724dc4ba44a..00000000000000
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <mach-se/mach/se7721.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = MRSHPC_IRQ0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
- &cf_ide_device,
- &heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
- /* for USB */
- __raw_writew(0x0000, 0xA405010C); /* PGCR */
- __raw_writew(0x0000, 0xA405010E); /* PHCR */
- __raw_writew(0x00AA, 0xA4050118); /* PPCR */
- __raw_writew(0x0000, 0xA4050124); /* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
- .mv_name = "Solution Engine 7721",
- .mv_setup = se7721_setup,
- .mv_init_irq = init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
deleted file mode 100644
index a5e89c0c6bb2d4..00000000000000
--- a/arch/sh/boards/mach-se/7722/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
deleted file mode 100644
index efa96edd47dc5f..00000000000000
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- */
-#define DRV_NAME "SE7722-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7722.h>
-
-#define IRQ01_BASE_ADDR 0x11800000
-#define IRQ01_MODE_REG 0
-#define IRQ01_STS_REG 4
-#define IRQ01_MASK_REG 8
-
-static void __iomem *se7722_irq_regs;
-struct irq_domain *se7722_irq_domain;
-
-static void se7722_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
-
- for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7722_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7722_domain_init(void)
-{
- int i;
-
- se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7722_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7722_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7722_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7722_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = IRQ01_MASK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize FPGA IRQs
- */
-void __init init_se7722_IRQ(void)
-{
- se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
- if (unlikely(!se7722_irq_regs)) {
- printk("Failed to remap IRQ01 regs\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7722_domain_init();
- se7722_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
deleted file mode 100644
index 2cd4a2e84b930c..00000000000000
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/irqdomain.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <mach-se/mach/se7722.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7722.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = { /* SW1 -> SW30 */
- KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
- KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
- KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
- KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
- KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
- KEY_Z,
- KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &cf_ide_device,
- &sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
- mrshpc_setup_windows();
-
- /* Wire-up dynamic vectors */
- cf_ide_resources[2].start = cf_ide_resources[2].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
-
- smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
-
- return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
- __raw_writew(0x010D, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
- /* LCDC I/O */
- __raw_writew(0x0020, PORT_PSELD);
-
- /* SIOF1*/
- __raw_writew(0x0003, PORT_PSELB);
- __raw_writew(0xe000, PORT_PSELC);
- __raw_writew(0x0000, PORT_PKCR);
-
- /* LCDC */
- __raw_writew(0x4020, PORT_PHCR);
- __raw_writew(0x0000, PORT_PLCR);
- __raw_writew(0x0000, PORT_PMCR);
- __raw_writew(0x0002, PORT_PRCR);
- __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
-
- /* KEYSC */
- __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- __raw_writew(0x0000, PORT_PYCR);
- __raw_writew(0x0000, PORT_PZCR);
- __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
- .mv_name = "Solution Engine 7722" ,
- .mv_setup = se7722_setup ,
- .mv_init_irq = init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
deleted file mode 100644
index 6c6112b24617d0..00000000000000
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
deleted file mode 100644
index 14ce3024738f3b..00000000000000
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/irq.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on linux/arch/sh/boards/se/7722/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7724 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-#include <linux/topology.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach-se/mach/se7724.h>
-
-struct fpga_irq {
- unsigned long sraddr;
- unsigned long mraddr;
- unsigned short mask;
- unsigned int base;
-};
-
-static unsigned int fpga2irq(unsigned int irq)
-{
- if (irq >= IRQ0_BASE &&
- irq <= IRQ0_END)
- return IRQ0_IRQ;
- else if (irq >= IRQ1_BASE &&
- irq <= IRQ1_END)
- return IRQ1_IRQ;
- else
- return IRQ2_IRQ;
-}
-
-static struct fpga_irq get_fpga_irq(unsigned int irq)
-{
- struct fpga_irq set;
-
- switch (irq) {
- case IRQ0_IRQ:
- set.sraddr = IRQ0_SR;
- set.mraddr = IRQ0_MR;
- set.mask = IRQ0_MASK;
- set.base = IRQ0_BASE;
- break;
- case IRQ1_IRQ:
- set.sraddr = IRQ1_SR;
- set.mraddr = IRQ1_MR;
- set.mask = IRQ1_MASK;
- set.base = IRQ1_BASE;
- break;
- default:
- set.sraddr = IRQ2_SR;
- set.mraddr = IRQ2_MR;
- set.mask = IRQ2_MASK;
- set.base = IRQ2_BASE;
- break;
- }
-
- return set;
-}
-
-static void disable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
-}
-
-static void enable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
-}
-
-static struct irq_chip se7724_irq_chip __read_mostly = {
- .name = "SE7724-FPGA",
- .irq_mask = disable_se7724_irq,
- .irq_unmask = enable_se7724_irq,
-};
-
-static void se7724_irq_demux(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = __raw_readw(set.sraddr);
- unsigned int ext_irq = set.base;
-
- intv &= set.mask;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7724_IRQ(void)
-{
- int irq_base, i;
-
- __raw_writew(0xffff, IRQ0_MR); /* mask all */
- __raw_writew(0xffff, IRQ1_MR); /* mask all */
- __raw_writew(0xffff, IRQ2_MR); /* mask all */
- __raw_writew(0x0000, IRQ0_SR); /* clear irq */
- __raw_writew(0x0000, IRQ1_SR); /* clear irq */
- __raw_writew(0x0000, IRQ2_SR); /* clear irq */
- __raw_writew(0x002a, IRQ_MODE); /* set irq type */
-
- irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
- SE7724_FPGA_IRQ_NR, numa_node_id());
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for FPGA\n", __func__);
- return;
- }
-
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
- irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
- handle_level_irq, "level");
-
- irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
deleted file mode 100644
index 61c1fe78d71a05..00000000000000
--- a/arch/sh/boards/mach-se/7724/sdram.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * MS7724SE sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ms7724se_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ms7724se_sdram_enter_end)
-
- .balign 4
-ENTRY(ms7724se_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* CPG: setup clocks before restarting external memory */
-
- ED 0xA4150024, 0x00004000 /* PLLCR */
-
- mov.l FRQCRA,r0
- mov.l @r0,r3
- mov.l KICK,r1
- or r1, r3
- mov.l r3, @r0
-
- mov.l LSTATS,r0
- mov #1,r1
-WAIT_LSTATS:
- mov.l @r0,r3
- tst r1,r3
- bf WAIT_LSTATS
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-FRQCRA: .long 0xa4150000
-KICK: .long 0x80000000
-LSTATS: .long 0xa4150060
-
-ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
deleted file mode 100644
index b60a2626e18b27..00000000000000
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ /dev/null
@@ -1,986 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/setup.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/smc91x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach-se/mach/se7724.h>
-#include <media/drv-intf/renesas-ceu.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/*
- * SWx 1234 5678
- * ------------------------------------
- * SW31 : 1001 1100 : default
- * SW32 : 0111 1111 : use on board flash
- *
- * SW41 : abxx xxxx -> a = 0 : Analog monitor
- * 1 : Digital monitor
- * b = 0 : VGA
- * 1 : 720p
- */
-
-/*
- * about 720p
- *
- * When you use 1280 x 720 lcdc output,
- * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
- * and change SW41 to use 720p
- */
-
-/*
- * about sound
- *
- * This setup.c supports FSI slave mode.
- * Please change J20, J21, J22 pin to 1-2 connection.
- */
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x1a300300,
- .end = 0x1a30030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ0_SMC,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* LCDC */
-static const struct fb_videomode lcdc_720p_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- },
-};
-
-static const struct fb_videomode lcdc_vga_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .hsync_len = 96,
- .upper_margin = 33,
- .lower_margin = 10,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .clock_divider = 1,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* "ceu.1" clock */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* FSI */
-/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_ak4642_info = {
- .name = "AK4642",
- .card = "FSIA-AK4642",
- .codec = "ak4642-codec.0-0012",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsia-dai",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
-};
-
-static struct platform_device fsi_ak4642_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_ak4642_info,
- },
-};
-
-/* KEYSC in SoC (Needs SW33-2 set to ON) */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .keycodes = {
- KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
- KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
- KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
- KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
- KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
- KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
- },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* SH Eth */
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8187 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb0_host_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
- .resource = sh7724_usb0_host_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb1_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb1_gadget_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb1_gadget_device = {
- .name = "r8a66597_udc",
- .id = 1, /* USB1 */
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb1_gadget_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
- .resource = sh7724_usb1_gadget_resources,
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn7_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 0,
- .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
- .resource = sdhi0_cn7_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct resource sdhi1_cn8_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi1_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn8_device = {
- .name = "sh_mobile_sdhi",
- .id = 1,
- .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
- .resource = sdhi1_cn8_resources,
- .dev = {
- .platform_data = &sh7724_sdhi1_data,
- },
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- /* With open J18 jumper address is 0x21 */
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-static struct platform_device *ms7724se_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ms7724se_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &lcdc_device,
- &nor_flash_device,
- &keysc_device,
- &sh_eth_device,
- &sh7724_usb0_host_device,
- &sh7724_usb1_gadget_device,
- &fsi_device,
- &fsi_ak4642_device,
- &sdhi0_cn7_device,
- &sdhi1_cn8_device,
- &irda_device,
- &vou_device,
-};
-
-/* I2C device */
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("ak4642", 0x12),
- },
-};
-
-#define EEPROM_OP 0xBA206000
-#define EEPROM_ADR 0xBA206004
-#define EEPROM_DATA 0xBA20600C
-#define EEPROM_STAT 0xBA206010
-#define EEPROM_STRT 0xBA206014
-
-static int __init sh_eth_is_eeprom_ready(void)
-{
- int t = 10000;
-
- while (t--) {
- if (!__raw_readw(EEPROM_STAT))
- return 1;
- udelay(1);
- }
-
- printk(KERN_ERR "ms7724se can not access to eeprom\n");
- return 0;
-}
-
-static void __init sh_eth_init(void)
-{
- int i;
- u16 mac;
-
- /* check EEPROM status */
- if (!sh_eth_is_eeprom_ready())
- return;
-
- /* read MAC addr from EEPROM */
- for (i = 0 ; i < 3 ; i++) {
- __raw_writew(0x0, EEPROM_OP); /* read */
- __raw_writew(i*2, EEPROM_ADR);
- __raw_writew(0x1, EEPROM_STRT);
- if (!sh_eth_is_eeprom_ready())
- return;
-
- mac = __raw_readw(EEPROM_DATA);
- sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
- sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
- }
-}
-
-#define SW4140 0xBA201000
-#define FPGA_OUT 0xBA200400
-#define PORT_HIZA 0xA4050158
-#define PORT_MSELCRB 0xA4050182
-
-#define SW41_A 0x0100
-#define SW41_B 0x0200
-#define SW41_C 0x0400
-#define SW41_D 0x0800
-#define SW41_E 0x1000
-#define SW41_F 0x2000
-#define SW41_G 0x4000
-#define SW41_H 0x8000
-
-extern char ms7724se_sdram_enter_start;
-extern char ms7724se_sdram_enter_end;
-extern char ms7724se_sdram_leave_start;
-extern char ms7724se_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- return 0;
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- u16 sw = __raw_readw(SW4140); /* select camera, monitor */
- struct clk *clk;
- u16 fpga_out;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ms7724se_sdram_enter_start,
- &ms7724se_sdram_enter_end,
- &ms7724se_sdram_leave_start,
- &ms7724se_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Reset Release */
- fpga_out = __raw_readw(FPGA_OUT);
- /* bit4: NTSC_PDN, bit5: NTSC_RESET */
- fpga_out &= ~((1 << 1) | /* LAN */
- (1 << 4) | /* AK8813 PDN */
- (1 << 5) | /* AK8813 RESET */
- (1 << 6) | /* VIDEO DAC */
- (1 << 7) | /* AK4643 */
- (1 << 8) | /* IrDA */
- (1 << 12) | /* USB0 */
- (1 << 14)); /* RMII */
- __raw_writew(fpga_out | (1 << 4), FPGA_OUT);
-
- udelay(10);
-
- /* AK8813 RESET */
- __raw_writew(fpga_out | (1 << 5), FPGA_OUT);
-
- udelay(10);
-
- __raw_writew(fpga_out, FPGA_OUT);
-
- /* turn on USB clocks, use external clock */
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
-
- /* Let LED9 show STATUS2 */
- gpio_request(GPIO_FN_STATUS2, NULL);
-
- /* Lit LED10 show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit LED11 show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable USB0 port */
- __raw_writew(0x0600, 0xa40501d4);
-
- /* enable USB1 port */
- __raw_writew(0x0600, 0xa4050192);
-
- /* enable IRQ 0,1,2 */
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_request(GPIO_FN_INTC_IRQ2, NULL);
-
- /* enable SCIFA3 */
- gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKA, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
- gpio_request(GPIO_FN_FSIOASD, NULL);
- gpio_request(GPIO_FN_FSIIABCK, NULL);
- gpio_request(GPIO_FN_FSIIALRCK, NULL);
- gpio_request(GPIO_FN_FSIOABCK, NULL);
- gpio_request(GPIO_FN_FSIOALRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI A */
- clk = clk_get(NULL, "fsia_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimcka_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimcka_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- /* SDHI0 connected to cn7 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- /* SDHI1 connected to cn8 */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
-
- /*
- * enable SH-Eth
- *
- * please remove J33 pin from your board !!
- *
- * ms7724 board should not use GPIO_FN_LNKSTA pin
- * So, This time PTX5 is set to input pin
- */
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_PTX5, NULL);
- gpio_direction_input(GPIO_PTX5);
- sh_eth_init();
-
- if (sw & SW41_B) {
- /* 720p */
- lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
- } else {
- /* VGA */
- lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
- }
-
- if (sw & SW41_A) {
- /* Digital monitor */
- lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].flags = 0;
- } else {
- /* Analog monitor */
- lcdc_info.ch[0].interface_type = RGB24;
- lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
- }
-
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ms7724se_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[0]);
-
- device_initialize(&ms7724se_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[1]);
-
- return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ms7724se_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ms7724se __initmv = {
- .mv_name = "ms7724se",
- .mv_init_irq = init_se7724_IRQ,
- .mv_mem_reserve = ms7724se_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
deleted file mode 100644
index 2406d3e353524b..00000000000000
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7751 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
deleted file mode 100644
index dcefe58d87534b..00000000000000
--- a/arch/sh/boards/mach-se/7751/irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <mach-se/mach/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
- { 13, 3, 3, 2 },
- /* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-se7751",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
deleted file mode 100644
index 4c480605557f46..00000000000000
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
- return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-device_initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
- .mv_name = "7751 SolutionEngine",
- .mv_init_irq = init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
deleted file mode 100644
index 1f6669ab1bc0db..00000000000000
--- a/arch/sh/boards/mach-se/7780/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
deleted file mode 100644
index d427dfd711f171..00000000000000
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7780.h>
-
-#define INTC_BASE 0xffd00000
-#define INTC_ICR1 (INTC_BASE+0x1c)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK1);
- /* mask SM501 interrupt */
- __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK2);
-
- /* set FPGA INTSEL register */
- /* FPGA + 0x06 */
- __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
- (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
- /* FPGA + 0x08 */
- __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
- (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
- (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
- (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
- /* FPGA + 0x0A */
- __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-
- /* ICR1: detect low level(for 2ndcut) */
- __raw_writel(0xAAAA0000, INTC_ICR1);
-
- /*
- * FPGA PCISEL register initialize
- *
- * CPU || SLOT1 | SLOT2 | S-ATA | USB
- * -------------------------------------
- * INTA || INTA | INTD | -- | INTB
- * -------------------------------------
- * INTB || INTB | INTA | -- | INTC
- * -------------------------------------
- * INTC || INTC | INTB | INTA | --
- * -------------------------------------
- * INTD || INTD | INTC | -- | INTA
- * -------------------------------------
- */
- __raw_writew(0x0013, FPGA_PCI_INTSEL1);
- __raw_writew(0xE402, FPGA_PCI_INTSEL2);
-}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
deleted file mode 100644
index 309f2681381b08..00000000000000
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SMC_IRQ,
- .end = SMC_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
- return platform_add_devices(se7780_devices,
- ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR 0xFFEA000E
-#define GPIO_PMSELR 0xFFEA0080
-#define GPIO_PECR 0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
- /* "SH-Linux" on LED Display */
- __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
- printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
- /*
- * PCI REQ/GNT setting
- * REQ0/GNT0 -> USB
- * REQ1/GNT1 -> PC Card
- * REQ2/GNT2 -> Serial ATA
- * REQ3/GNT3 -> PCI slot
- */
- __raw_writew(0x0213, FPGA_REQSEL);
-
- /* GPIO setting */
- __raw_writew(0x0000, GPIO_PECR);
- __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- __raw_writew(0x0c00, GPIO_PMSELR);
-
- /* iVDR Power ON */
- __raw_writew(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Solution Engine 7780" ,
- .mv_setup = se7780_setup ,
- .mv_init_irq = init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
deleted file mode 100644
index 8f69fc147c733d..00000000000000
--- a/arch/sh/boards/mach-se/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
-
-obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
-obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
-obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
-obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
-obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
-obj-$(CONFIG_SH_7724_SOLUTION_ENGINE) += 7724/
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
deleted file mode 100644
index 4431da64a56f6a..00000000000000
--- a/arch/sh/boards/mach-se/board-se7619.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/se/7619/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Hitachi SH7619 SolutionEngine Support.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static int se7619_mode_pins(void)
-{
- return MODE_PIN2 | MODE_PIN0;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_mode_pins = se7619_mode_pins,
-};
diff --git a/arch/sh/boards/mach-sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
deleted file mode 100644
index f89c25c6a39c8a..00000000000000
--- a/arch/sh/boards/mach-sh03/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
deleted file mode 100644
index 7fb474844a2d1d..00000000000000
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support
- *
- * Copyright (C) 2004 Saito.K & Jeanne(ksaito@interface.co.jp)
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#define RTC_BASE 0xb0000000
-#define RTC_SEC1 (RTC_BASE + 0)
-#define RTC_SEC10 (RTC_BASE + 1)
-#define RTC_MIN1 (RTC_BASE + 2)
-#define RTC_MIN10 (RTC_BASE + 3)
-#define RTC_HOU1 (RTC_BASE + 4)
-#define RTC_HOU10 (RTC_BASE + 5)
-#define RTC_WEE1 (RTC_BASE + 6)
-#define RTC_DAY1 (RTC_BASE + 7)
-#define RTC_DAY10 (RTC_BASE + 8)
-#define RTC_MON1 (RTC_BASE + 9)
-#define RTC_MON10 (RTC_BASE + 10)
-#define RTC_YEA1 (RTC_BASE + 11)
-#define RTC_YEA10 (RTC_BASE + 12)
-#define RTC_YEA100 (RTC_BASE + 13)
-#define RTC_YEA1000 (RTC_BASE + 14)
-#define RTC_CTL (RTC_BASE + 15)
-#define RTC_BUSY 1
-#define RTC_STOP 2
-
-static DEFINE_SPINLOCK(sh03_rtc_lock);
-
-static int sh03_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&sh03_rtc_lock);
- again:
- do {
- sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
- min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
- day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
- mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
- year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
- + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
- + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
- } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
- if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
- hour > 23 || min > 59 || sec > 59) {
- printk(KERN_ERR
- "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n");
- printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
- year, mon, day, hour, min, sec);
-
- __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
- __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
- __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
- __raw_writeb(6, RTC_WEE1);
- __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
- __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
- __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
- __raw_writeb(0, RTC_YEA100);
- __raw_writeb(2, RTC_YEA1000);
- __raw_writeb(0, RTC_CTL);
- goto again;
- }
-
- spin_unlock(&sh03_rtc_lock);
-
- tm->tm_sec = sec;
- tm->tm_min = min;
- tm->tm_hour = hour;
- tm->tm_mday = day;
- tm->tm_mon = mon;
- tm->tm_year = year - 1900;
-
- return 0;
-}
-
-static int set_rtc_mmss(struct rtc_time *tm)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- int i;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&sh03_rtc_lock);
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
- break;
- cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- real_seconds = tm->tm_sec;
- real_minutes = tm->tm_min;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- __raw_writeb(real_seconds % 10, RTC_SEC1);
- __raw_writeb(real_seconds / 10, RTC_SEC10);
- __raw_writeb(real_minutes % 10, RTC_MIN1);
- __raw_writeb(real_minutes / 10, RTC_MIN10);
- } else {
- printk_once(KERN_NOTICE
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -EINVAL;
- }
- spin_unlock(&sh03_rtc_lock);
-
- return retval;
-}
-
-int sh03_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- return set_rtc_mmss(tm);
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = sh03_rtc_gettimeofday,
- .set_time = sh03_rtc_settimeofday,
-};
-
-static int __init sh03_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(sh03_time_init);
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
deleted file mode 100644
index 3901b6031ad565..00000000000000
--- a/arch/sh/boards/mach-sh03/setup.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004 Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <mach-sh03/mach/io.h>
-#include <mach-sh03/mach/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRL2_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa0800000,
- .end = 0xa0800000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start += (unsigned long)cf_ide_base;
- cf_ide_resources[0].end += (unsigned long)cf_ide_base;
- cf_ide_resources[1].start += (unsigned long)cf_ide_base;
- cf_ide_resources[1].end += (unsigned long)cf_ide_base;
-
- return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-device_initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
- .mv_name = "Interface (CTP/PCI-SH03)",
- .mv_init_irq = init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
deleted file mode 100644
index d6341310444a51..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
deleted file mode 100644
index efd382b7dad403..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
- *
- * Renesas Solutions SH7763RDP Support.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/sh7763rdp.h>
-
-#define INTC_BASE (0xFFD00000)
-#define INTC_INT2PRI7 (INTC_BASE+0x4001C)
-#define INTC_INT2MSKCR (INTC_BASE+0x4003C)
-#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_sh7763rdp_IRQ(void)
-{
- /* GPIO enabled */
- __raw_writel(1 << 25, INTC_INT2MSKCR);
-
- /* enable GPIO interrupts */
- __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
- INTC_INT2PRI7);
-
- /* USBH enabled */
- __raw_writel(1 << 17, INTC_INT2MSKCR1);
-
- /* GETHER enabled */
- __raw_writel(1 << 16, INTC_INT2MSKCR1);
-
- /* DMAC enabled */
- __raw_writel(1 << 8, INTC_INT2MSKCR);
-}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
deleted file mode 100644
index 97e715e4e9b33c..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
- *
- * Renesas Solutions sh7763rdp board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <mach/sh7763rdp.h>
-#include <asm/sh7760fb.h>
-
-/* NOR Flash */
-static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * 128 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * 128 * 1024),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data sh7763rdp_nor_flash_data = {
- .width = 2,
- .parts = sh7763rdp_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
-};
-
-static struct resource sh7763rdp_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = (64 * 1024 * 1024),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device sh7763rdp_nor_flash_device = {
- .name = "physmap-flash",
- .resource = sh7763rdp_nor_flash_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
- .dev = {
- .platform_data = &sh7763rdp_nor_flash_data,
- },
-};
-
-/*
- * SH-Ether
- *
- * SH Ether of SH7763 has multi IRQ handling.
- * (0x920,0x940,0x960 -> 0x920)
- */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh7763rdp_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-/* SH7763 LCDC */
-static struct resource sh7763rdp_fb_resources[] = {
- {
- .start = 0xFFE80000,
- .end = 0xFFE80442 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct fb_videomode sh7763fb_videomode = {
- .refresh = 60,
- .name = "VGA Monitor",
- .xres = 640,
- .yres = 480,
- .pixclock = 10000,
- .left_margin = 80,
- .right_margin = 24,
- .upper_margin = 30,
- .lower_margin = 1,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = FBINFO_FLAG_DEFAULT,
-};
-
-static struct sh7760fb_platdata sh7763fb_def_pdata = {
- .def_mode = &sh7763fb_videomode,
- .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
- .lddfr = LDDFR_16BPP_RGB565,
- .ldpmmr = 0x0000,
- .ldpspr = 0xFFFF,
- .ldaclnr = 0x0001,
- .ldickr = 0x1102,
- .rotate = 0,
- .novsync = 0,
- .blank = NULL,
-};
-
-static struct platform_device sh7763rdp_fb_device = {
- .name = "sh7760-lcdc",
- .resource = sh7763rdp_fb_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
- .dev = {
- .platform_data = &sh7763fb_def_pdata,
- },
-};
-
-static struct platform_device *sh7763rdp_devices[] __initdata = {
- &sh7763rdp_nor_flash_device,
- &sh7763rdp_eth_device,
- &sh7763rdp_fb_device,
-};
-
-static int __init sh7763rdp_devices_setup(void)
-{
- return platform_add_devices(sh7763rdp_devices,
- ARRAY_SIZE(sh7763rdp_devices));
-}
-device_initcall(sh7763rdp_devices_setup);
-
-static void __init sh7763rdp_setup(char **cmdline_p)
-{
- /* Board version check */
- if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
- printk(KERN_INFO "RTE Standard Configuration\n");
- else
- printk(KERN_INFO "RTA Standard Configuration\n");
-
- /* USB pin select bits (clear bit 5-2 to 0) */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
- /* USBH setup port I controls to other (clear bits 4-9 to 0) */
- __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
-
- /* Select USB Host controller */
- __raw_writew(0x00, USB_USBHSC);
-
- /* For LCD */
- /* set PTJ7-1, bits 15-2 of PJCR to 0 */
- __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
- /* set PTI5, bits 11-10 of PICR to 0 */
- __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
- __raw_writew(0, PORT_PKCR);
- __raw_writew(0, PORT_PLCR);
- /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
- /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
-
- /* For HAC */
- /* bit3-0 0100:HAC & SSI1 enable */
- __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
- /* bit14 1:SSI_HAC_CLK enable */
- __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
-
- /* SH-Ether */
- __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
-
- /* MMC */
- /*selects SCIF and MMC other functions */
- __raw_writew(0x0001, PORT_PSEL0);
- /* MMC clock operates */
- __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
- __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
- __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
-}
-
-static struct sh_machine_vector mv_sh7763rdp __initmv = {
- .mv_name = "sh7763drp",
- .mv_setup = sh7763rdp_setup,
- .mv_init_irq = init_sh7763rdp_IRQ,
-};
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
deleted file mode 100644
index 6caefa1145980d..00000000000000
--- a/arch/sh/boards/mach-x3proto/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += setup.o ilsel.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
deleted file mode 100644
index f82d3a6a844a58..00000000000000
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/gpio.c
- *
- * Renesas SH-X3 Prototype Baseboard GPIO Support.
- *
- * Copyright (C) 2010 - 2012 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-
-#define KEYCTLR 0xb81c0000
-#define KEYOUTR 0xb81c0002
-#define KEYDETR 0xb81c0004
-
-static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static struct irq_domain *x3proto_irq_domain;
-
-static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
- unsigned int data;
-
- spin_lock_irqsave(&x3proto_gpio_lock, flags);
- data = __raw_readw(KEYCTLR);
- data |= (1 << gpio);
- __raw_writew(data, KEYCTLR);
- spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
-
- return 0;
-}
-
-static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(__raw_readw(KEYDETR) & (1 << gpio));
-}
-
-static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
- int virq;
-
- if (gpio < chip->ngpio)
- virq = irq_create_mapping(x3proto_irq_domain, gpio);
- else
- virq = -ENXIO;
-
- return virq;
-}
-
-static void x3proto_gpio_irq_handler(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int pin;
-
- chip->irq_mask_ack(data);
-
- mask = __raw_readw(KEYDETR);
- for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
- generic_handle_domain_irq(x3proto_irq_domain, pin);
-
- chip->irq_unmask(data);
-}
-
-struct gpio_chip x3proto_gpio_chip = {
- .label = "x3proto-gpio",
- .direction_input = x3proto_gpio_direction_input,
- .get = x3proto_gpio_get,
- .to_irq = x3proto_gpio_to_irq,
- .base = -1,
- .ngpio = NR_BASEBOARD_GPIOS,
-};
-
-static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
- "gpio");
-
- return 0;
-}
-
-static struct irq_domain_ops x3proto_gpio_irq_ops = {
- .map = x3proto_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-int __init x3proto_gpio_setup(void)
-{
- int ilsel, ret;
-
- ilsel = ilsel_enable(ILSEL_KEY);
- if (unlikely(ilsel < 0))
- return ilsel;
-
- ret = gpiochip_add_data(&x3proto_gpio_chip, NULL);
- if (unlikely(ret))
- goto err_gpio;
-
- x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
- &x3proto_gpio_irq_ops, NULL);
- if (unlikely(!x3proto_irq_domain))
- goto err_irq;
-
- pr_info("registering '%s' support, handling GPIOs %u -> %u, "
- "bound to IRQ %u\n",
- x3proto_gpio_chip.label, x3proto_gpio_chip.base,
- x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
- ilsel);
-
- irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
- irq_set_irq_wake(ilsel, 1);
-
- return 0;
-
-err_irq:
- gpiochip_remove(&x3proto_gpio_chip);
- ret = 0;
-err_gpio:
- synchronize_irq(ilsel);
-
- ilsel_disable(ILSEL_KEY);
-
- return ret;
-}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
deleted file mode 100644
index f0d5eb41521a49..00000000000000
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/ilsel.c
- *
- * Helper routines for SH-X3 proto board ILSEL.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-
-/*
- * ILSEL is split across:
- *
- * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ]
- * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ]
- * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ]
- * ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
- *
- * With each level being relative to an ilsel_source_t.
- */
-#define ILSEL_BASE 0xb8100004
-#define ILSEL_LEVELS 15
-
-/*
- * ILSEL level map, in descending order from the highest level down.
- *
- * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
- * directly to IRLs. As the IRQs are numbered in reverse order relative
- * to the interrupt level, the level map is carefully managed to ensure a
- * 1:1 mapping between the bit position and the IRQ number.
- *
- * This careful constructions allows ilsel_enable*() to be referenced
- * directly for hooking up an ILSEL set and getting back an IRQ which can
- * subsequently be used for internal accounting in the (optional) disable
- * path.
- */
-static unsigned long ilsel_level_map;
-
-static inline unsigned int ilsel_offset(unsigned int bit)
-{
- return ILSEL_LEVELS - bit - 1;
-}
-
-static inline unsigned long mk_ilsel_addr(unsigned int bit)
-{
- return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
-}
-
-static inline unsigned int mk_ilsel_shift(unsigned int bit)
-{
- return (ilsel_offset(bit) & 0x3) << 2;
-}
-
-static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
-{
- unsigned int tmp, shift;
- unsigned long addr;
-
- pr_notice("enabling ILSEL set %d\n", set);
-
- addr = mk_ilsel_addr(bit);
- shift = mk_ilsel_shift(bit);
-
- pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
- __func__, bit, addr, shift, set);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << shift);
- tmp |= set << shift;
- __raw_writew(tmp, addr);
-}
-
-/**
- * ilsel_enable - Enable an ILSEL set.
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- *
- * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
- * available interrupt level. Callers should take care to order callsites
- * noting descending interrupt levels. Aliasing FPGA and external board
- * IRQs need to use ilsel_enable_fixed().
- *
- * The return value is an IRQ number that can later be taken down with
- * ilsel_disable().
- */
-int ilsel_enable(ilsel_source_t set)
-{
- unsigned int bit;
-
- if (unlikely(set > ILSEL_KEY)) {
- pr_err("Aliased sources must use ilsel_enable_fixed()\n");
- return -EINVAL;
- }
-
- do {
- bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
- } while (test_and_set_bit(bit, &ilsel_level_map));
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable);
-
-/**
- * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- * @level: Interrupt level (1 - 15)
- *
- * Enables a given ILSEL source at a fixed interrupt level. Necessary
- * both for level reservation as well as for aliased sources that only
- * exist on special ILSEL#s.
- *
- * Returns an IRQ number (as ilsel_enable()).
- */
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
-{
- unsigned int bit = ilsel_offset(level - 1);
-
- if (test_and_set_bit(bit, &ilsel_level_map))
- return -EBUSY;
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
-
-/**
- * ilsel_disable - Disable an ILSEL set
- * @irq: Bit position for ILSEL set value (retval from enable routines)
- *
- * Disable a previously enabled ILSEL set.
- */
-void ilsel_disable(unsigned int irq)
-{
- unsigned long addr;
- unsigned int tmp;
-
- pr_notice("disabling ILSEL set %d\n", irq);
-
- addr = mk_ilsel_addr(irq);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << mk_ilsel_shift(irq));
- __raw_writew(tmp, addr);
-
- clear_bit(irq, &ilsel_level_map);
-}
-EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
deleted file mode 100644
index 95b85f2e13dda7..00000000000000
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/setup.c
- *
- * Renesas SH-X3 Prototype Board Support.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xb8140020,
- .end = 0xb8140020,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x18000300,
- .end = 0x18000300 + 0x10 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .resource = smc91x_resources,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0x18040000,
- .end = 0x18080000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0x18080000,
- .end = 0x180c0000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
- {
- .desc = "key44",
- .code = KEY_POWER,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key43",
- .code = KEY_SUSPEND,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key42",
- .code = KEY_KATAKANAHIRAGANA,
- .active_low = 1,
- }, {
- .desc = "key41",
- .code = KEY_SWITCHVIDEOMODE,
- .active_low = 1,
- }, {
- .desc = "key34",
- .code = KEY_F12,
- .active_low = 1,
- }, {
- .desc = "key33",
- .code = KEY_F11,
- .active_low = 1,
- }, {
- .desc = "key32",
- .code = KEY_F10,
- .active_low = 1,
- }, {
- .desc = "key31",
- .code = KEY_F9,
- .active_low = 1,
- }, {
- .desc = "key24",
- .code = KEY_F8,
- .active_low = 1,
- }, {
- .desc = "key23",
- .code = KEY_F7,
- .active_low = 1,
- }, {
- .desc = "key22",
- .code = KEY_F6,
- .active_low = 1,
- }, {
- .desc = "key21",
- .code = KEY_F5,
- .active_low = 1,
- }, {
- .desc = "key14",
- .code = KEY_F4,
- .active_low = 1,
- }, {
- .desc = "key13",
- .code = KEY_F3,
- .active_low = 1,
- }, {
- .desc = "key12",
- .code = KEY_F2,
- .active_low = 1,
- }, {
- .desc = "key11",
- .code = KEY_F1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data baseboard_buttons_data = {
- .buttons = baseboard_buttons,
- .nbuttons = ARRAY_SIZE(baseboard_buttons),
-};
-
-static struct platform_device baseboard_buttons_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &baseboard_buttons_data,
- },
-};
-
-static struct platform_device *x3proto_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_device,
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &baseboard_buttons_device,
-};
-
-static void __init x3proto_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- /* Set ICR0.LVLMODE */
- __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
-static int __init x3proto_devices_setup(void)
-{
- int ret, i;
-
- /*
- * IRLs are only needed for ILSEL mappings, so flip over the INTC
- * pins at a later point to enable the GPIOs to settle.
- */
- x3proto_init_irq();
-
- /*
- * Now that ILSELs are available, set up the baseboard GPIOs.
- */
- ret = x3proto_gpio_setup();
- if (unlikely(ret))
- return ret;
-
- /*
- * Propagate dynamic GPIOs for the baseboard button device.
- */
- for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
- baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
-
- r8a66597_usb_host_resources[1].start =
- r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
-
- m66592_usb_peripheral_resources[1].start =
- m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
-
- smc91x_resources[1].start =
- smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
-
- return platform_add_devices(x3proto_devices,
- ARRAY_SIZE(x3proto_devices));
-}
-device_initcall(x3proto_devices_setup);
-
-static void __init x3proto_setup(char **cmdline_p)
-{
- register_smp_ops(&shx3_smp_ops);
-}
-
-static struct sh_machine_vector mv_x3proto __initmv = {
- .mv_name = "x3proto",
- .mv_setup = x3proto_setup,
-};
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
deleted file mode 100644
index f7f3e618e85b6a..00000000000000
--- a/arch/sh/boards/of-generic.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH generic board support, using device tree
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/of_fdt.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-
-#ifdef CONFIG_SMP
-
-static void dummy_smp_setup(void)
-{
-}
-
-static void dummy_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
-}
-
-static unsigned int dummy_smp_processor_id(void)
-{
- return 0;
-}
-
-static void dummy_send_ipi(unsigned int cpu, unsigned int message)
-{
-}
-
-static struct plat_smp_ops dummy_smp_ops = {
- .smp_setup = dummy_smp_setup,
- .prepare_cpus = dummy_prepare_cpus,
- .start_cpu = dummy_start_cpu,
- .smp_processor_id = dummy_smp_processor_id,
- .send_ipi = dummy_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-extern const struct of_cpu_method __cpu_method_of_table[];
-const struct of_cpu_method __cpu_method_of_table_sentinel
- __section("__cpu_method_of_table_end");
-
-static void sh_of_smp_probe(void)
-{
- struct device_node *np;
- const char *method = NULL;
- const struct of_cpu_method *m = __cpu_method_of_table;
-
- pr_info("SH generic board support: scanning for cpus\n");
-
- init_cpu_possible(cpumask_of(0));
-
- for_each_of_cpu_node(np) {
- u64 id = of_get_cpu_hwid(np, 0);
-
- if (id < NR_CPUS) {
- if (!method)
- of_property_read_string(np, "enable-method", &method);
- set_cpu_possible(id, true);
- set_cpu_present(id, true);
- __cpu_number_map[id] = id;
- __cpu_logical_map[id] = id;
- }
- }
- if (!method) {
- np = of_find_node_by_name(NULL, "cpus");
- of_property_read_string(np, "enable-method", &method);
- of_node_put(np);
- }
-
- pr_info("CPU enable method: %s\n", method);
- if (method)
- for (; m->method; m++)
- if (!strcmp(m->method, method)) {
- register_smp_ops(m->ops);
- return;
- }
-
- register_smp_ops(&dummy_smp_ops);
-}
-
-#else
-
-static void sh_of_smp_probe(void)
-{
-}
-
-#endif
-
-static void noop(void)
-{
-}
-
-static int noopi(void)
-{
- return 0;
-}
-
-static void __init sh_of_mem_reserve(void)
-{
- early_init_fdt_reserve_self();
- early_init_fdt_scan_reserved_mem();
-}
-
-static void __init sh_of_setup(char **cmdline_p)
-{
- struct device_node *root;
-
- sh_mv.mv_name = "Unknown SH model";
- root = of_find_node_by_path("/");
- if (root) {
- of_property_read_string(root, "model", &sh_mv.mv_name);
- of_node_put(root);
- }
-
- sh_of_smp_probe();
-}
-
-static int sh_of_irq_demux(int irq)
-{
- /* FIXME: eventually this should not be used at all;
- * the interrupt controller should set_handle_irq(). */
- return irq;
-}
-
-static void __init sh_of_init_irq(void)
-{
- pr_info("SH generic board support: scanning for interrupt controllers\n");
- irqchip_init();
-}
-
-static int __init sh_of_clk_init(void)
-{
-#ifdef CONFIG_COMMON_CLK
- /* Disabled pending move to COMMON_CLK framework. */
- pr_info("SH generic board support: scanning for clk providers\n");
- of_clk_init(NULL);
-#endif
- return 0;
-}
-
-static struct sh_machine_vector __initmv sh_of_generic_mv = {
- .mv_setup = sh_of_setup,
- .mv_name = "devicetree", /* replaced by DT root's model */
- .mv_irq_demux = sh_of_irq_demux,
- .mv_init_irq = sh_of_init_irq,
- .mv_clk_init = sh_of_clk_init,
- .mv_mode_pins = noopi,
- .mv_mem_init = noop,
- .mv_mem_reserve = sh_of_mem_reserve,
-};
-
-struct sh_clk_ops;
-
-void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
-}
-
-void __init __weak plat_irq_setup(void)
-{
-}
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
deleted file mode 100644
index 6603bbbc917d64..00000000000000
--- a/arch/sh/boot/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-zImage
-vmlinux*
-uImage*
-!vmlinux.scr
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
deleted file mode 100644
index 1f5d2df3c7e060..00000000000000
--- a/arch/sh/boot/Makefile
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# arch/sh/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1999 Stuart Menefy
-#
-
-#
-# Assign safe dummy values if these variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_PAGE_OFFSET ?= 0x80000000
-CONFIG_MEMORY_START ?= 0x0c000000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
-CONFIG_ENTRY_OFFSET ?= 0x00001000
-CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
-
-suffix_y := bin
-suffix_$(CONFIG_KERNEL_GZIP) := gz
-suffix_$(CONFIG_KERNEL_BZIP2) := bz2
-suffix_$(CONFIG_KERNEL_LZMA) := lzma
-suffix_$(CONFIG_KERNEL_XZ) := xz
-suffix_$(CONFIG_KERNEL_LZO) := lzo
-
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
- uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin \
- vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
- vmlinux.bin.xz vmlinux.bin.lzo
-subdir- := compressed romimage
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
- $(Q)$(MAKE) $(build)=$(obj)/romimage $@
-
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
-
-KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET)]')
-
-KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
-
-UIMAGE_LOADADDR = $(KERNEL_LOAD)
-UIMAGE_ENTRYADDR = $(KERNEL_ENTRY)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern)
-
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo)
-
-$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 FORCE
- $(call if_changed,uimage,bzip2)
-
-$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,uimage,gzip)
-
-$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
- $(call if_changed,uimage,lzma)
-
-$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz FORCE
- $(call if_changed,uimage,xz)
-
-$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
- $(call if_changed,uimage,lzo)
-
-$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
- $(call if_changed,uimage,none)
-
-OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
-$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
-
-OBJCOPYFLAGS_uImage.srec := -I binary -O srec
-$(obj)/uImage.srec: $(obj)/uImage FORCE
- $(call if_changed,objcopy)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix_y)
- @ln -sf $(notdir $<) $@
- @echo ' Image $@ is ready'
-
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
- KERNEL_MEMORY suffix_y
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
deleted file mode 100644
index cd16663bc7c84c..00000000000000
--- a/arch/sh/boot/compressed/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
deleted file mode 100644
index 591125c42d49df..00000000000000
--- a/arch/sh/boot/compressed/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-OBJECTS := head_32.o misc.o cache.o piggy.o \
- ashiftrt.o ashldi3.o ashrsi3.o ashlsi3.o lshrsi3.o
-
-# These were previously generated files. When you are building the kernel
-# with O=, make sure to remove the stale files in the output tree. Otherwise,
-# the build system wrongly compiles the stale ones.
-ifdef building_out_of_srctree
-$(shell rm -f $(addprefix $(obj)/, ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S))
-endif
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
- vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
-
-GCOV_PROFILE := n
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-#
-ifeq ($(CONFIG_32BIT),y)
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-else
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-endif
-
-ccflags-remove-$(CONFIG_MCOUNT) += -pg
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
- -T $(obj)/../../kernel/vmlinux.lds
-
-KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-
-$(obj)/vmlinux: $(addprefix $(obj)/, $(OBJECTS)) FORCE
- $(call if_changed,ld)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2_with_size)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma_with_size)
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern_with_size)
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo_with_size)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/compressed/ashiftrt.S b/arch/sh/boot/compressed/ashiftrt.S
deleted file mode 100644
index 0f3b291a3f4bca..00000000000000
--- a/arch/sh/boot/compressed/ashiftrt.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashiftrt.S"
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
deleted file mode 100644
index 7cebd646df839b..00000000000000
--- a/arch/sh/boot/compressed/ashldi3.c
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../lib/ashldi3.c"
diff --git a/arch/sh/boot/compressed/ashlsi3.S b/arch/sh/boot/compressed/ashlsi3.S
deleted file mode 100644
index e354262b275f4d..00000000000000
--- a/arch/sh/boot/compressed/ashlsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashlsi3.S"
diff --git a/arch/sh/boot/compressed/ashrsi3.S b/arch/sh/boot/compressed/ashrsi3.S
deleted file mode 100644
index e564be9a4dcd89..00000000000000
--- a/arch/sh/boot/compressed/ashrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashrsi3.S"
diff --git a/arch/sh/boot/compressed/cache.c b/arch/sh/boot/compressed/cache.c
deleted file mode 100644
index 31e04ff4841ed0..00000000000000
--- a/arch/sh/boot/compressed/cache.c
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-int cache_control(unsigned int command)
-{
- volatile unsigned int *p = (volatile unsigned int *) 0x80000000;
- int i;
-
- for (i = 0; i < (32 * 1024); i += 32) {
- (void)*p;
- p += (32 / sizeof(int));
- }
-
- return 0;
-}
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
deleted file mode 100644
index 7bb168133dbbf8..00000000000000
--- a/arch/sh/boot/compressed/head_32.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/compressed/head.S
- *
- * Copyright (C) 1999 Stuart Menefy
- * Copyright (C) 2003 SUGIOKA Toshinobu
- */
-
-.text
-
-#include <asm/page.h>
-
- .global startup
-startup:
- /* Load initial status register */
- mov.l init_sr, r1
- ldc r1, sr
-
- /* Move myself to proper location if necessary */
- mova 1f, r0
- mov.l 1f, r2
- cmp/eq r2, r0
- bt clear_bss
- sub r0, r2
- mov.l bss_start_addr, r0
- mov #0xffffffe0, r1
- and r1, r0 ! align cache line
- mov.l text_start_addr, r3
- mov r0, r1
- sub r2, r1
-3:
- mov.l @r1, r4
- mov.l @(4,r1), r5
- mov.l @(8,r1), r6
- mov.l @(12,r1), r7
- mov.l @(16,r1), r8
- mov.l @(20,r1), r9
- mov.l @(24,r1), r10
- mov.l @(28,r1), r11
- mov.l r4, @r0
- mov.l r5, @(4,r0)
- mov.l r6, @(8,r0)
- mov.l r7, @(12,r0)
- mov.l r8, @(16,r0)
- mov.l r9, @(20,r0)
- mov.l r10, @(24,r0)
- mov.l r11, @(28,r0)
-#ifdef CONFIG_CPU_SH4
- ocbwb @r0
-#endif
- cmp/hi r3, r0
- add #-32, r0
- bt/s 3b
- add #-32, r1
- mov.l 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 1b
-2: .long clear_bss
-text_start_addr:
- .long startup
-
- /* Clear BSS */
-clear_bss:
- mov.l end_addr, r1
- mov.l bss_start_addr, r2
- mov #0, r0
-l1:
- mov.l r0, @-r1
- cmp/eq r1,r2
- bf l1
-
- /* Set the initial pointer. */
- mov.l init_stack_addr, r0
- mov.l @r0, r15
-
- /* Decompress the kernel */
- mov.l decompress_kernel_addr, r0
- jsr @r0
- nop
-
- /* Jump to the start of the decompressed kernel */
- mov.l kernel_start_addr, r0
- jmp @r0
- nop
-
- .align 2
-bss_start_addr:
- .long __bss_start
-end_addr:
- .long _end
-init_sr:
- .long 0x500000F0 /* Privileged mode, Bank=0, Block=1, IMASK=0xF */
-kexec_magic:
- .long 0x400000F0 /* magic used by kexec to parse zImage format */
-init_stack_addr:
- .long stack_start
-decompress_kernel_addr:
- .long decompress_kernel
-kernel_start_addr:
-#ifdef CONFIG_32BIT
- .long ___pa(_text+PAGE_SIZE)
-#else
- .long _text+PAGE_SIZE
-#endif
-
- .align 9
-fake_headers_as_bzImage:
- .word 0
- .ascii "HdrS" ! header signature
- .word 0x0202 ! header version number (>= 0x0105)
- ! or else old loadlin-1.5 will fail)
- .word 0 ! default_switch
- .word 0 ! SETUPSEG
- .word 0x1000
- .word 0 ! pointing to kernel version string
- .byte 0 ! = 0, old one (LILO, Loadlin,
- ! 0xTV: T=0 for LILO
- ! V = version
- .byte 1 ! Load flags bzImage=1
- .word 0x8000 ! size to move, when setup is not
- .long 0x100000 ! 0x100000 = default for big kernel
- .long 0 ! address of loaded ramdisk image
- .long 0 # its size in bytes
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
deleted file mode 100644
index 9993113c671386..00000000000000
--- a/arch/sh/boot/compressed/head_64.S
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/shmedia/boot/compressed/head.S
- *
- * Copied from
- * arch/shmedia/kernel/head.S
- * which carried the copyright:
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * Modification for compressed loader:
- * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
- */
-#include <asm/cache.h>
-#include <asm/tlb.h>
-#include <cpu/mmu_context.h>
-#include <cpu/registers.h>
-
-/*
- * Fixed TLB entries to identity map the beginning of RAM
- */
-#define MMUIR_TEXT_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUIR_TEXT_L 0x000000000000009a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */
-
-#define MMUDR_CACHED_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUDR_CACHED_L 0x000000000000015a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */
-
-#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
-#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
-
-#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
-#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
-
- .text
-
- .global startup
-startup:
- /*
- * Prevent speculative fetch on device memory due to
- * uninitialized target registers.
- * This must be executed before the first branch.
- */
- ptabs/u r63, tr0
- ptabs/u r63, tr1
- ptabs/u r63, tr2
- ptabs/u r63, tr3
- ptabs/u r63, tr4
- ptabs/u r63, tr5
- ptabs/u r63, tr6
- ptabs/u r63, tr7
- synci
-
- /*
- * Set initial TLB entries for cached and uncached regions.
- * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
- */
- /* Clear ITLBs */
- pta 1f, tr1
- movi ITLB_FIXED, r21
- movi ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUIR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Clear DTLBs */
- pta 1f, tr1
- movi DTLB_FIXED, r21
- movi DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUDR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Map one big (512Mb) page for ITLB */
- movi ITLB_FIXED, r21
- movi MMUIR_TEXT_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
- movi MMUIR_TEXT_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
-
- /* Map one big CACHED (512Mb) page for DTLB */
- movi DTLB_FIXED, r21
- movi MMUDR_CACHED_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
- movi MMUDR_CACHED_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
-
- /* ICache */
- movi ICCR_BASE, r21
- movi ICCR0_INIT_VAL, r22
- movi ICCR1_INIT_VAL, r23
- putcfg r21, ICCR_REG0, r22
- putcfg r21, ICCR_REG1, r23
- synci
-
- /* OCache */
- movi OCCR_BASE, r21
- movi OCCR0_INIT_VAL, r22
- movi OCCR1_INIT_VAL, r23
- putcfg r21, OCCR_REG0, r22
- putcfg r21, OCCR_REG1, r23
- synco
-
- /*
- * Enable the MMU.
- * From here-on code can be non-PIC.
- */
- movi SR_HARMLESS | SR_ENABLE_MMU, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Set initial stack pointer */
- movi datalabel stack_start, r0
- ld.l r0, 0, r15
-
- /*
- * Clear bss
- */
- pt 1f, tr1
- movi datalabel __bss_start, r22
- movi datalabel _end, r23
-1: st.l r22, 0, r63
- addi r22, 4, r22
- bne r22, r23, tr1
-
- /*
- * Decompress the kernel.
- */
- pt decompress_kernel, tr0
- blink tr0, r18
-
- /*
- * Disable the MMU.
- */
- movi SR_HARMLESS, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Jump into the decompressed kernel */
- movi datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19
- ptabs r19, tr0
- blink tr0, r18
-
- /* Shouldn't return here, but just in case, loop forever */
- pt 1f, tr0
-1: blink tr0, r63
diff --git a/arch/sh/boot/compressed/lshrsi3.S b/arch/sh/boot/compressed/lshrsi3.S
deleted file mode 100644
index 5a8281b7e5161b..00000000000000
--- a/arch/sh/boot/compressed/lshrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/lshrsi3.S"
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
deleted file mode 100644
index ca05c99a3d5b48..00000000000000
--- a/arch/sh/boot/compressed/misc.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SH by Stuart Menefy, Aug 1999
- *
- * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
- */
-
-#include <linux/uaccess.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * gzip declarations
- */
-
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-/* cache.c */
-#define CACHE_ENABLE 0
-#define CACHE_DISABLE 1
-int cache_control(unsigned int command);
-
-extern char input_data[];
-extern int input_len;
-static unsigned char *output;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _text; /* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE 0x400000
-#else
-#define HEAP_SIZE 0x10000
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-#ifdef CONFIG_KERNEL_XZ
-#include "../../../../lib/decompress_unxz.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-int puts(const char *s)
-{
- /* This should be updated to use the sh-sci routines */
- return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
- error("stack-protector: Kernel stack is corrupted\n");
-}
-
-/* Needed because vmlinux.lds.h references this */
-void ftrace_stub(void)
-{
-}
-void arch_ftrace_ops_list_func(void)
-{
-}
-
-#define stackalign 4
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
- unsigned long output_addr;
-
- output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
-#if defined(CONFIG_29BIT)
- output_addr |= P2SEG;
-#endif
-
- output = (unsigned char *)output_addr;
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
- puts("Uncompressing Linux... ");
- cache_control(CACHE_ENABLE);
- __decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
- cache_control(CACHE_DISABLE);
- puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index dd292b4b9082b5..00000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
- .rodata..compressed : ALIGN(8) {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
deleted file mode 100644
index 4a6dec9714a9e2..00000000000000
--- a/arch/sh/boot/dts/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USE_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE))
diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
deleted file mode 100644
index fa9562f78d532c..00000000000000
--- a/arch/sh/boot/dts/j2_mimas_v2.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-/ {
- compatible = "jcore,j2-soc";
- model = "J2 FPGA SoC on Mimas v2 board";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&aic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "jcore,j2";
- reg = <0>;
- clock-frequency = <50000000>;
- d-cache-size = <8192>;
- i-cache-size = <8192>;
- d-cache-block-size = <16>;
- i-cache-block-size = <16>;
- };
- };
-
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x4000000>;
- };
-
- aliases {
- serial0 = &uart0;
- spi0 = &spi0;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-
- soc@abcd0000 {
- compatible = "simple-bus";
- ranges = <0 0xabcd0000 0x100000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- aic: interrupt-controller@200 {
- compatible = "jcore,aic1";
- reg = <0x200 0x10>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- cache-controller@c0 {
- compatible = "jcore,cache";
- reg = <0xc0 4>;
- };
-
- timer@200 {
- compatible = "jcore,pit";
- reg = <0x200 0x30>;
- interrupts = <0x48>;
- };
-
- spi0: spi@40 {
- compatible = "jcore,spi2";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- spi-max-frequency = <25000000>;
-
- reg = <0x40 0x8>;
-
- sdcard@0 {
- compatible = "mmc-spi-slot";
- reg = <0>;
- spi-max-frequency = <25000000>;
- voltage-ranges = <3200 3400>;
- mode = <0>;
- };
- };
-
- uart0: serial@100 {
- clock-frequency = <125000000>;
- compatible = "xlnx,xps-uartlite-1.00.a";
- current-speed = <19200>;
- xlnx,use-parity = <0>;
- xlnx,data-bits = <8>;
- device_type = "serial";
- interrupts = <0x12>;
- port-number = <0>;
- reg = <0x100 0x10>;
- };
- };
-};
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
deleted file mode 100644
index c7c8be58400cd9..00000000000000
--- a/arch/sh/boot/romimage/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/romimage/Makefile
-#
-# create an romImage file suitable for burning to flash/mmc from zImage
-#
-
-targets := vmlinux head.o zeropage.bin piggy.o
-load-y := 0
-
-mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM
-mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o
-load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y)
-obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y)
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
- -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
-
-OBJCOPYFLAGS += -j .empty_zero_page
-
-$(obj)/zeropage.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
deleted file mode 100644
index 81a0652a3dff4b..00000000000000
--- a/arch/sh/boot/romimage/head.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/romimage/head.S
- *
- * Board specific setup code, executed before zImage loader
- */
-
-.text
- #include <asm/page.h>
-
- .global romstart
-romstart:
- /* include board specific setup code */
-#include <mach/romimage.h>
-
-#ifdef CONFIG_ROMIMAGE_MMCIF
- /* load the romImage to above the empty zero page */
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l bytes_to_load, r5
- mov.l loader_function, r7
- jsr @r7
- mov r4, r15
-
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l loaded_code_offs, r5
- add r5, r4
- jmp @r4
- nop
-
- .balign 4
-empty_zero_page_dst_adj:
- .long PAGE_SIZE
-bytes_to_load:
- .long end_data - romstart
-loader_function:
- .long mmcif_loader
-loaded_code_offs:
- .long loaded_code - romstart
-loaded_code:
-#endif /* CONFIG_ROMIMAGE_MMCIF */
-
- /* copy the empty_zero_page contents to where vmlinux expects it */
- mova extra_data_pos, r0
- mov.l extra_data_size, r1
- add r1, r0
- mov.l empty_zero_page_dst, r1
- mov #(PAGE_SHIFT - 4), r4
- mov #1, r3
- shld r4, r3 /* r3 = PAGE_SIZE / 16 */
-
-1:
- mov.l @r0, r4
- mov.l @(4, r0), r5
- mov.l @(8, r0), r6
- mov.l @(12, r0), r7
- add #16,r0
- mov.l r4, @r1
- mov.l r5, @(4, r1)
- mov.l r6, @(8, r1)
- mov.l r7, @(12, r1)
- dt r3
- add #16,r1
- bf 1b
-
- /* jump to the zImage entry point located after the zero page data */
- mov #PAGE_SHIFT, r4
- mov #1, r1
- shld r4, r1
- mova extra_data_pos, r0
- add r1, r0
- mov.l extra_data_size, r1
- add r1, r0
- jmp @r0
- nop
-
- .align 2
-empty_zero_page_dst:
- .long _text
-extra_data_pos:
-extra_data_size:
- .long zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
deleted file mode 100644
index d30123d859e054..00000000000000
--- a/arch/sh/boot/romimage/mmcif-sh7724.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * sh7724 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_data/sh_mmcif.h>
-#include <mach/romimage.h>
-
-#define MMCIF_BASE (void __iomem *)0xa4ca0000
-
-#define MSTPCR2 0xa4150038
-#define PTWCR 0xa4050146
-#define PTXCR 0xa4050148
-#define PSELA 0xa405014e
-#define PSELE 0xa4050156
-#define HIZCRC 0xa405015c
-#define DRVCRA 0xa405018a
-
-enum {
- MMCIF_PROGRESS_ENTER,
- MMCIF_PROGRESS_INIT,
- MMCIF_PROGRESS_LOAD,
- MMCIF_PROGRESS_DONE
-};
-
-/* SH7724 specific MMCIF loader
- *
- * loads the romImage from an MMC card starting from block 512
- * use the following line to write the romImage to an MMC card
- * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
- */
-asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
-{
- mmcif_update_progress(MMCIF_PROGRESS_ENTER);
-
- /* enable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
-
- /* setup pins D7-D0 */
- __raw_writew(0x0000, PTWCR);
-
- /* setup pins MMC_CLK, MMC_CMD */
- __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
-
- /* select D3-D0 pin function */
- __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
-
- /* select D7-D4 pin function */
- __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
-
- /* disable Hi-Z for the MMC pins */
- __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
-
- /* high drive capability for MMC pins */
- __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
-
- mmcif_update_progress(MMCIF_PROGRESS_INIT);
-
- /* setup MMCIF hardware */
- sh_mmcif_boot_init(MMCIF_BASE);
-
- mmcif_update_progress(MMCIF_PROGRESS_LOAD);
-
- /* load kernel via MMCIF interface */
- sh_mmcif_boot_do_read(MMCIF_BASE, 512,
- (no_bytes + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS,
- buf);
-
- /* disable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
-
- mmcif_update_progress(MMCIF_PROGRESS_DONE);
-}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
deleted file mode 100644
index 590394e2f5f2e4..00000000000000
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ /dev/null
@@ -1,8 +0,0 @@
-SECTIONS
-{
- .text : {
- zero_page_pos = .;
- *(.data)
- end_data = .;
- }
-}
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
deleted file mode 100644
index efde2edb562780..00000000000000
--- a/arch/sh/cchips/Kconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Companion Chips"
-
-config HD6446X_SERIES
- bool
-
-choice
- prompt "HD6446x options"
- depends on HD6446X_SERIES
- default HD64461
-
-config HD64461
- bool "Hitachi HD64461 companion chip support"
- help
- The Hitachi HD64461 provides an interface for
- the SH7709 CPU, supporting a LCD controller,
- CRT color controller, IrDA up to 4 Mbps, and a
- PCMCIA controller supporting 2 slots.
-
- More information is available at
- <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
-
- Say Y if you want support for the HD64461.
- Otherwise, say N.
-
-endchoice
-
-# These will also be split into the Kconfig's below
-config HD64461_IRQ
- int "HD64461 IRQ"
- depends on HD64461
- default "36"
- help
- The default setting of the HD64461 IRQ is 36.
-
- Do not change this unless you know what you are doing.
-
-config HD64461_ENABLER
- bool "HD64461 PCMCIA enabler"
- depends on HD64461
- help
- Say Y here if you want to enable PCMCIA support
- via the HD64461 companion chip.
- Otherwise, say N.
-
-endmenu
diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile
deleted file mode 100644
index 6673e0abef2ed8..00000000000000
--- a/arch/sh/cchips/hd6446x/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HD64461) += hd64461.o
-
-ccflags-y := -Werror
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
deleted file mode 100644
index f3fba967445aca..00000000000000
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2000 YAEGASHI Takeshi
- * Hitachi HD64461 companion chip support
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hd64461.h>
-
-/* This belongs in cpu specific */
-#define INTC_ICR1 0xA4140010UL
-
-static void hd64461_mask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr |= mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_unmask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr &= ~mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_mask_and_ack_irq(struct irq_data *data)
-{
- hd64461_mask_irq(data);
-
-#ifdef CONFIG_HD64461_ENABLER
- if (data->irq == HD64461_IRQBASE + 13)
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-}
-
-static struct irq_chip hd64461_irq_chip = {
- .name = "HD64461-IRQ",
- .irq_mask = hd64461_mask_irq,
- .irq_mask_ack = hd64461_mask_and_ack_irq,
- .irq_unmask = hd64461_unmask_irq,
-};
-
-static void hd64461_irq_demux(struct irq_desc *desc)
-{
- unsigned short intv = __raw_readw(HD64461_NIRR);
- unsigned int ext_irq = HD64461_IRQBASE;
-
- intv &= (1 << HD64461_IRQ_NUM) - 1;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-int __init setup_hd64461(void)
-{
- int irq_base, i;
-
- printk(KERN_INFO
- "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
- HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
- HD64461_IRQBASE + 15);
-
-/* Should be at processor specific part.. */
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
- __raw_writew(0x2240, INTC_ICR1);
-#endif
- __raw_writew(0xffff, HD64461_NIMR);
-
- irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for HD64461\n", __func__);
- return irq_base;
- }
-
- for (i = 0; i < 16; i++)
- irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
- irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-#ifdef CONFIG_HD64461_ENABLER
- printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
- __raw_writeb(0x4c, HD64461_PCC1CSCIER);
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-module_init(setup_hd64461);
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
deleted file mode 100644
index 4d83576b89c665..00000000000000
--- a/arch/sh/configs/ap325rxa_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7723=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_AP325RXA=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SH_FLCTL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/apsh4a3a_defconfig b/arch/sh/configs/apsh4a3a_defconfig
deleted file mode 100644
index 99931a13a74da9..00000000000000
--- a/arch/sh/configs/apsh4a3a_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4A3A=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
deleted file mode 100644
index d9fb124bf015a2..00000000000000
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4AD0A=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
deleted file mode 100644
index 6a82c7b8ff32b8..00000000000000
--- a/arch/sh/configs/dreamcast_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7091=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_DREAMCAST=y
-CONFIG_SH_PCLK_FREQ=49876504
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_NR_DMA_CHANNELS=9
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
-CONFIG_MAPLE=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_GDROM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_MAPLE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PVR2=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
deleted file mode 100644
index 5c60e71d839e05..00000000000000
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
deleted file mode 100644
index b52e14ccb450d4..00000000000000
--- a/arch/sh/configs/ecovec24_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2007=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-CONFIG_SND_FSI_DA7210=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_SDHI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
deleted file mode 100644
index 9ee35269bee260..00000000000000
--- a/arch/sh/configs/edosk7705_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PRINTK is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_SH_EDOSK7705=y
-CONFIG_SH_PCLK_FREQ=31250000
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
deleted file mode 100644
index f427a95bcd21e5..00000000000000
--- a/arch/sh/configs/edosk7760_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_LOCALVERSION="_edosk7760"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7760=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_EDOSK7760=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
-CONFIG_DEBUG_DEVRES=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=26000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH7760=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=m
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
deleted file mode 100644
index 2804cb760a7615..00000000000000
--- a/arch/sh/configs/espt_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_ESPT=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
deleted file mode 100644
index 70e6605d7f7ef7..00000000000000
--- a/arch/sh/configs/hp6xx_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0d000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_HP6XX=y
-CONFIG_SH_PCLK_FREQ=22110000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HD64461_ENABLER=y
-CONFIG_PCCARD=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_HP6XX=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_HIT=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_PEARL_8x8=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
deleted file mode 100644
index 2eb81ebe3888bf..00000000000000
--- a/arch/sh/configs/j2_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_SUBTYPE_J2=y
-CONFIG_MEMORY_START=0x10000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_DEVICE_TREE=y
-CONFIG_SH_JCORE_SOC=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttyUL0 earlycon"
-CONFIG_BINFMT_ELF_FDPIC=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-CONFIG_SERIAL_EARLYCON=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_JCORE=y
-CONFIG_WATCHDOG=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_CLKSRC_JCORE_PIT=y
-CONFIG_JCORE_AIC=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_FAT_DEFAULT_UTF8=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_UTF8=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
deleted file mode 100644
index 04436b4fbd7695..00000000000000
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 quiet"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
deleted file mode 100644
index 833404490cfeea..00000000000000
--- a/arch/sh/configs/kfr2r09_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_NO_HZ=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_UBI=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
deleted file mode 100644
index 7037320b654ad6..00000000000000
--- a/arch/sh/configs/landisk_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LANDISK=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_ATALK=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_ATP867X=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_REISERFS_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_SMB_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
deleted file mode 100644
index 05e4ac6fed5f9c..00000000000000
--- a/arch/sh/configs/lboxre2_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LBOX_RE2=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
deleted file mode 100644
index ef1d98e35c91f7..00000000000000
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7720=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_MEMORY_SIZE=0x03F00000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_MAGIC_PANEL_R2=y
-CONFIG_SH_PCLK_FREQ=24000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
deleted file mode 100644
index e9825196dd66af..00000000000000
--- a/arch/sh/configs/microdev_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH4202_MICRODEV=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-CONFIG_SUPERHYWAY=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
deleted file mode 100644
index 4859cd30cfc4c6..00000000000000
--- a/arch/sh/configs/migor_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_SH_MIGOR=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_MIGOR=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
deleted file mode 100644
index f42e4867ddc1a7..00000000000000
--- a/arch/sh/configs/polaris_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_FPU_EMU=y
-CONFIG_SH_POLARIS=y
-CONFIG_SH_PCLK_FREQ=33000000
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_100=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_COMPAT=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_SG=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
deleted file mode 100644
index e527cd60a19105..00000000000000
--- a/arch/sh/configs/r7780mp_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_8129=y
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_E1000=m
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_THERMAL=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
deleted file mode 100644
index a3f952a83d970f..00000000000000
--- a/arch/sh/configs/r7785rp_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_4KSTACKS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
deleted file mode 100644
index 376e95fa77bc68..00000000000000
--- a/arch/sh/configs/rsk7201_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_AIO is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7201=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
deleted file mode 100644
index 1d5fd67a3949b4..00000000000000
--- a/arch/sh/configs/rsk7203_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7203=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=16670800
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_SG=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig
deleted file mode 100644
index f7b9c528c6df87..00000000000000
--- a/arch/sh/configs/rsk7264_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_LOCALVERSION="uClinux RSK2+SH7264"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_COUNTERS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CPU_SUBTYPE_SH7264=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig
deleted file mode 100644
index 4bff14fb185dbb..00000000000000
--- a/arch/sh/configs/rsk7269_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_CPU_SUBTYPE_SH7269=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_SH_PCLK_FREQ=66700000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
deleted file mode 100644
index 96263a4912b726..00000000000000
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_1=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
deleted file mode 100644
index 92e586e6c97432..00000000000000
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
deleted file mode 100644
index 41cb588ca99cb7..00000000000000
--- a/arch/sh/configs/sdk7780_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_LOCALVERSION="_SDK7780"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_RELAY=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SDK7780=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_NET_SCHED=y
-CONFIG_PARPORT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NETCONSOLE=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_DEBUG=y
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
deleted file mode 100644
index 97b7356639ed82..00000000000000
--- a/arch/sh/configs/sdk7786_defconfig
+++ /dev/null
@@ -1,217 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_NUMA=y
-CONFIG_HUGETLB_PAGE_SIZE_64MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SDK7786=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_SH_DMA=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_INTC_BALANCING=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER_INJECT=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_PHRAM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_SH_FLCTL=m
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_DEBUG=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX6900=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=m
-CONFIG_FSCACHE=m
-CONFIG_CACHEFILES=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_UBIFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_LATENCYTOP=y
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_FUNCTION_GRAPH_TRACER is not set
-CONFIG_DMA_API_DEBUG=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
deleted file mode 100644
index 78e0e7be57ee1f..00000000000000
--- a/arch/sh/configs/se7206_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_UID16 is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7206=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7206_SOLUTION_ENGINE=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
deleted file mode 100644
index 5d6c19338ebf29..00000000000000
--- a/arch/sh/configs/se7343_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7343=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_DM9601=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
deleted file mode 100644
index 71a672c307168e..00000000000000
--- a/arch/sh/configs/se7619_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7619_SOLUTION_ENGINE=y
-CONFIG_HZ_100=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
deleted file mode 100644
index ed00a6eeadf55e..00000000000000
--- a/arch/sh/configs/se7705_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_SYSFS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
deleted file mode 100644
index 36356223d51c83..00000000000000
--- a/arch/sh/configs/se7712_defconfig
+++ /dev/null
@@ -1,101 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7712=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
deleted file mode 100644
index 46c5a263a23925..00000000000000
--- a/arch/sh/configs/se7721_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7721=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_7721_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
deleted file mode 100644
index 09e45581744743..00000000000000
--- a/arch/sh/configs/se7722_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
deleted file mode 100644
index d817df7cc4a72a..00000000000000
--- a/arch/sh/configs/se7724_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7724_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_DVB_CORE=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SUPERH is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_SH4_FSI=m
-CONFIG_SND_FSI_AK4642=y
-CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
deleted file mode 100644
index 4defc7628a498a..00000000000000
--- a/arch/sh/configs/se7750_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7750=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
deleted file mode 100644
index 4a024065bb7501..00000000000000
--- a/arch/sh/configs/se7751_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
deleted file mode 100644
index dcd85b858ac8ca..00000000000000
--- a/arch/sh/configs/se7780_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_THERMAL=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/secureedge5410_defconfig b/arch/sh/configs/secureedge5410_defconfig
deleted file mode 100644
index 8422599cfb04dc..00000000000000
--- a/arch/sh/configs/secureedge5410_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SECUREEDGE5410=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1302=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
deleted file mode 100644
index 9fcf68b22dba9a..00000000000000
--- a/arch/sh/configs/sh03_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH03=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig
deleted file mode 100644
index 259c69e3fa2279..00000000000000
--- a/arch/sh/configs/sh2007_defconfig
+++ /dev/null
@@ -1,199 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_VSYSCALL is not set
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH2007=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
-CONFIG_PCCARD=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NET_PKTGEN=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SRP_ATTRS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_EQUALIZER=y
-CONFIG_TUN=y
-CONFIG_VETH=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_SSB=y
-CONFIG_FB=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_DMADEVICES=y
-CONFIG_TIMB_DMA=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=932
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
deleted file mode 100644
index 0d814770b07fe9..00000000000000
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7710=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_PCLK_FREQ=32768000
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_U32=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_PHONE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
deleted file mode 100644
index cbc9389a89a8c0..00000000000000
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
deleted file mode 100644
index 2579dc4bc0c8f6..00000000000000
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7757=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x0f000000
-CONFIG_PMB=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH7757LCR=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_WLAN is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_SPI=y
-CONFIG_SPI_SH=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SH=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_SH=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_SQUASHFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
deleted file mode 100644
index 8a6a446f9eb88a..00000000000000
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_SH7763RDP=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
deleted file mode 100644
index ee2357deba0f1c..00000000000000
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7770=y
-CONFIG_SH_PCLK_FREQ=41666666
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_PM=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
deleted file mode 100644
index 781ff13227fc99..00000000000000
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ /dev/null
@@ -1,149 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_GCOV_KERNEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_R8169=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_MFD_SM501=y
-# CONFIG_VGA_ARB is not set
-CONFIG_FB=y
-CONFIG_FB_KYRO=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_VERBOSE=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_CMIPCI=y
-CONFIG_SND_EMU10K1=y
-# CONFIG_SND_SUPERH is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_LATENCYTOP=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
deleted file mode 100644
index 1b88929083f786..00000000000000
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_R8169=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
deleted file mode 100644
index e078b193a78a89..00000000000000
--- a/arch/sh/configs/shmin_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7706=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SHMIN=y
-CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
deleted file mode 100644
index aa353dff7f1931..00000000000000
--- a/arch/sh/configs/shx3_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SHX3=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_PAGE_SIZE_64KB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_X3PROTO=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_VM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
deleted file mode 100644
index 73a0d68b0de6ce..00000000000000
--- a/arch/sh/configs/titan_defconfig
+++ /dev/null
@@ -1,272 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x08030000
-CONFIG_MEMORY_SIZE=0x7fd0000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_TITAN=y
-CONFIG_SH_PCLK_FREQ=30000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_DIAG=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139_OLD_RX_RESET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
deleted file mode 100644
index 103b81ec1ffb91..00000000000000
--- a/arch/sh/configs/ul2_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7366=y
-CONFIG_MEMORY_SIZE=0x01f00000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
deleted file mode 100644
index 8fc687c98fd195..00000000000000
--- a/arch/sh/configs/urquell_defconfig
+++ /dev/null
@@ -1,147 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_URQUELL=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_PCI_DEBUG=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_SKY2=y
-CONFIG_SKY2_DEBUG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-CONFIG_MFD_SM501=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FTRACE is not set
-# CONFIG_DUMP_CODE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
deleted file mode 100644
index 80a45ad2852fdf..00000000000000
--- a/arch/sh/drivers/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "arch/sh/drivers/dma/Kconfig"
-source "arch/sh/cchips/Kconfig"
-
-menu "Additional SuperH Device Drivers"
-
-config HEARTBEAT
- bool "Heartbeat LED"
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PUSH_SWITCH
- tristate "Push switch support"
- help
- This enables support for the push switch framework, a simple
- framework that allows for sysfs driven switch status reporting.
-
-endmenu
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
deleted file mode 100644
index 56b0acace6e7c8..00000000000000
--- a/arch/sh/drivers/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific device drivers.
-#
-
-obj-y += dma/ platform_early.o
-
-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
-obj-$(CONFIG_HEARTBEAT) += heartbeat.o
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
deleted file mode 100644
index 7d54f284ce10fb..00000000000000
--- a/arch/sh/drivers/dma/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "DMA support"
-
-
-config SH_DMA
- bool "SuperH on-chip DMA controller (DMAC) support"
- depends on CPU_SH3 || CPU_SH4
- default n
-
-config SH_DMA_IRQ_MULTI
- bool
- depends on SH_DMA
- default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
- CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
- CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7760
-
-config SH_DMA_API
- depends on SH_DMA
- bool "SuperH DMA API support"
- default n
- help
- SH_DMA_API always enabled DMA API of used SuperH.
- If you want to use DMA ENGINE, you must not enable this.
- Please enable DMA_ENGINE and SH_DMAE.
-
-config NR_ONCHIP_DMA_CHANNELS
- int
- depends on SH_DMA
- default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091
- default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
- CPU_SUBTYPE_SH7760
- default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
- default "6"
- help
- This allows you to specify the number of channels that the on-chip
- DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
- SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
-
-config SH_DMABRG
- bool "SH7760 DMABRG support"
- depends on CPU_SUBTYPE_SH7760
- help
- The DMABRG does data transfers from main memory to Audio/USB units
- of the SH7760.
- Say Y if you want to use Audio/USB DMA on your SH7760 board.
-
-config PVR2_DMA
- tristate "PowerVR 2 DMAC support"
- depends on SH_DREAMCAST && SH_DMA
- help
- Selecting this will enable support for the PVR2 DMA controller.
- As this chains off of the on-chip DMAC, that must also be
- enabled by default.
-
- This is primarily used by the pvr2fb framebuffer driver for
- certain optimizations, but is not necessary for functionality.
-
- If in doubt, say N.
-
-config G2_DMA
- tristate "G2 Bus DMA support"
- depends on SH_DREAMCAST && SH_DMA_API
- help
- This enables support for the DMA controller for the Dreamcast's
- G2 bus. Drivers that want this will generally enable this on
- their own.
-
- If in doubt, say N.
-
-endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
deleted file mode 100644
index d2fdd56208f6e3..00000000000000
--- a/arch/sh/drivers/dma/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH DMA specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
-obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
-obj-$(CONFIG_G2_DMA) += dma-g2.o
-obj-$(CONFIG_SH_DMABRG) += dmabrg.o
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
deleted file mode 100644
index ab9170494dcc29..00000000000000
--- a/arch/sh/drivers/dma/dma-api.c
+++ /dev/null
@@ -1,417 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-api.c
- *
- * SuperH-specific DMA management API
- *
- * Copyright (C) 2003, 2004, 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-
-DEFINE_SPINLOCK(dma_spin_lock);
-static LIST_HEAD(registered_dmac_list);
-
-struct dma_info *get_dma_info(unsigned int chan)
-{
- struct dma_info *info;
-
- /*
- * Look for each DMAC's range to determine who the owner of
- * the channel is.
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if ((chan < info->first_vchannel_nr) ||
- (chan >= info->first_vchannel_nr + info->nr_channels))
- continue;
-
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info);
-
-struct dma_info *get_dma_info_by_name(const char *dmac_name)
-{
- struct dma_info *info;
-
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if (dmac_name && (strcmp(dmac_name, info->name) != 0))
- continue;
- else
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info_by_name);
-
-static unsigned int get_nr_channels(void)
-{
- struct dma_info *info;
- unsigned int nr = 0;
-
- if (unlikely(list_empty(®istered_dmac_list)))
- return nr;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- nr += info->nr_channels;
-
- return nr;
-}
-
-struct dma_channel *get_dma_channel(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel;
- int i;
-
- if (unlikely(!info))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (channel->vchan == chan)
- return channel;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_channel);
-
-int get_dma_residue(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->get_residue)
- return info->ops->get_residue(channel);
-
- return 0;
-}
-EXPORT_SYMBOL(get_dma_residue);
-
-static int search_cap(const char **haystack, const char *needle)
-{
- const char **p;
-
- for (p = haystack; *p; p++)
- if (strcmp(*p, needle) == 0)
- return 1;
-
- return 0;
-}
-
-/**
- * request_dma_bycap - Allocate a DMA channel based on its capabilities
- * @dmac: List of DMA controllers to search
- * @caps: List of capabilities
- *
- * Search all channels of all DMA controllers to find a channel which
- * matches the requested capabilities. The result is the channel
- * number if a match is found, or %-ENODEV if no match is found.
- *
- * Note that not all DMA controllers export capabilities, in which
- * case they can never be allocated using this API, and so
- * request_dma() must be used specifying the channel number.
- */
-int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
-{
- unsigned int found = 0;
- struct dma_info *info;
- const char **p;
- int i;
-
- BUG_ON(!dmac || !caps);
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(*dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (!found)
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = &info->channels[i];
-
- if (unlikely(!channel->caps))
- continue;
-
- for (p = caps; *p; p++) {
- if (!search_cap(channel->caps, *p))
- break;
- if (request_dma(channel->chan, dev_id) == 0)
- return channel->chan;
- }
- }
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(request_dma_bycap);
-
-int dmac_search_free_channel(const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(0);
- int i;
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (unlikely(!channel))
- return -ENODEV;
-
- if (atomic_read(&channel->busy) == 0)
- break;
- }
-
- if (info->ops->request) {
- int result = info->ops->request(channel);
- if (result)
- return result;
-
- atomic_set(&channel->busy, 1);
- return channel->chan;
- }
-
- return -ENOSYS;
-}
-
-int request_dma(unsigned int chan, const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(chan);
- int result;
-
- channel = get_dma_channel(chan);
- if (atomic_xchg(&channel->busy, 1))
- return -EBUSY;
-
- strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
-
- if (info->ops->request) {
- result = info->ops->request(channel);
- if (result)
- atomic_set(&channel->busy, 0);
-
- return result;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(request_dma);
-
-void free_dma(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->free)
- info->ops->free(channel);
-
- atomic_set(&channel->busy, 0);
-}
-EXPORT_SYMBOL(free_dma);
-
-void dma_wait_for_completion(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (channel->flags & DMA_TEI_CAPABLE) {
- wait_event(channel->wait_queue,
- (info->ops->get_residue(channel) == 0));
- return;
- }
-
- while (info->ops->get_residue(channel))
- cpu_relax();
-}
-EXPORT_SYMBOL(dma_wait_for_completion);
-
-int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
-{
- struct dma_info *info;
- unsigned int found = 0;
- int i;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (unlikely(!found))
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++, caps++) {
- struct dma_channel *channel;
-
- if ((info->first_channel_nr + i) != caps->ch_num)
- return -EINVAL;
-
- channel = &info->channels[i];
- channel->caps = caps->caplist;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(register_chan_caps);
-
-void dma_configure_channel(unsigned int chan, unsigned long flags)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->configure)
- info->ops->configure(channel, flags);
-}
-EXPORT_SYMBOL(dma_configure_channel);
-
-int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- channel->sar = from;
- channel->dar = to;
- channel->count = size;
- channel->mode = mode;
-
- return info->ops->xfer(channel);
-}
-EXPORT_SYMBOL(dma_xfer);
-
-int dma_extend(unsigned int chan, unsigned long op, void *param)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->extend)
- return info->ops->extend(channel, op, param);
-
- return -ENOSYS;
-}
-EXPORT_SYMBOL(dma_extend);
-
-static int dma_proc_show(struct seq_file *m, void *v)
-{
- struct dma_info *info = v;
-
- if (list_empty(®istered_dmac_list))
- return 0;
-
- /*
- * Iterate over each registered DMAC
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- int i;
-
- /*
- * Iterate over each channel
- */
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = info->channels + i;
-
- if (!(channel->flags & DMA_CONFIGURED))
- continue;
-
- seq_printf(m, "%2d: %14s %s\n", i,
- info->name, channel->dev_id);
- }
- }
-
- return 0;
-}
-
-int register_dmac(struct dma_info *info)
-{
- unsigned int total_channels, i;
-
- INIT_LIST_HEAD(&info->list);
-
- printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
- info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
-
- BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
-
- info->pdev = platform_device_register_simple(info->name, -1,
- NULL, 0);
- if (IS_ERR(info->pdev))
- return PTR_ERR(info->pdev);
-
- /*
- * Don't touch pre-configured channels
- */
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) {
- unsigned int size;
-
- size = sizeof(struct dma_channel) * info->nr_channels;
-
- info->channels = kzalloc(size, GFP_KERNEL);
- if (!info->channels)
- return -ENOMEM;
- }
-
- total_channels = get_nr_channels();
- info->first_vchannel_nr = total_channels;
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *chan = &info->channels[i];
-
- atomic_set(&chan->busy, 0);
-
- chan->chan = info->first_channel_nr + i;
- chan->vchan = info->first_channel_nr + i + total_channels;
-
- memcpy(chan->dev_id, "Unused", 7);
-
- if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
- chan->flags |= DMA_TEI_CAPABLE;
-
- init_waitqueue_head(&chan->wait_queue);
- dma_create_sysfs_files(chan, info);
- }
-
- list_add(&info->list, ®istered_dmac_list);
-
- return 0;
-}
-EXPORT_SYMBOL(register_dmac);
-
-void unregister_dmac(struct dma_info *info)
-{
- unsigned int i;
-
- for (i = 0; i < info->nr_channels; i++)
- dma_remove_sysfs_files(info->channels + i, info);
-
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
- kfree(info->channels);
-
- list_del(&info->list);
- platform_device_unregister(info->pdev);
-}
-EXPORT_SYMBOL(unregister_dmac);
-
-static int __init dma_api_init(void)
-{
- printk(KERN_NOTICE "DMA: Registering DMA API.\n");
- return proc_create_single("dma", 0, NULL, dma_proc_show) ? 0 : -ENOMEM;
-}
-subsys_initcall(dma_api_init);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("DMA API for SuperH");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
deleted file mode 100644
index 52a8ae5e30d2fb..00000000000000
--- a/arch/sh/drivers/dma/dma-g2.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-g2.c
- *
- * G2 bus DMA support
- *
- * Copyright (C) 2003 - 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <asm/cacheflush.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-
-struct g2_channel {
- unsigned long g2_addr; /* G2 bus address */
- unsigned long root_addr; /* Root bus (SH-4) address */
- unsigned long size; /* Size (in bytes), 32-byte aligned */
- unsigned long direction; /* Transfer direction */
- unsigned long ctrl; /* Transfer control */
- unsigned long chan_enable; /* Channel enable */
- unsigned long xfer_enable; /* Transfer enable */
- unsigned long xfer_stat; /* Transfer status */
-} __attribute__ ((aligned(32)));
-
-struct g2_status {
- unsigned long g2_addr;
- unsigned long root_addr;
- unsigned long size;
- unsigned long status;
-} __attribute__ ((aligned(16)));
-
-struct g2_dma_info {
- struct g2_channel channel[G2_NR_DMA_CHANNELS];
- unsigned long pad1[G2_NR_DMA_CHANNELS];
- unsigned long wait_state;
- unsigned long pad2[10];
- unsigned long magic;
- struct g2_status status[G2_NR_DMA_CHANNELS];
-} __attribute__ ((aligned(256)));
-
-static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
-
-#define g2_bytes_remaining(i) \
- ((g2_dma->channel[i].size - \
- g2_dma->status[i].size) & 0x0fffffff)
-
-static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
-{
- int i;
-
- for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
- if (g2_dma->status[i].status & 0x20000000) {
- unsigned int bytes = g2_bytes_remaining(i);
-
- if (likely(bytes == 0)) {
- struct dma_info *info = dev_id;
- struct dma_channel *chan = info->channels + i;
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
- }
- }
- }
-
- return IRQ_NONE;
-}
-
-static int g2_enable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 1;
- g2_dma->channel[chan_nr].xfer_enable = 1;
-
- return 0;
-}
-
-static int g2_disable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 0;
- g2_dma->channel[chan_nr].xfer_enable = 0;
-
- return 0;
-}
-
-static int g2_xfer_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- if (chan->sar & 31) {
- printk("g2dma: unaligned source 0x%lx\n", chan->sar);
- return -EINVAL;
- }
-
- if (chan->dar & 31) {
- printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
- return -EINVAL;
- }
-
- /* Align the count */
- if (chan->count & 31)
- chan->count = (chan->count + (32 - 1)) & ~(32 - 1);
-
- /* Fixup destination */
- chan->dar += 0xa0800000;
-
- /* Fixup direction */
- chan->mode = !chan->mode;
-
- flush_icache_range((unsigned long)chan->sar, chan->count);
-
- g2_disable_dma(chan);
-
- g2_dma->channel[chan_nr].g2_addr = chan->dar & 0x1fffffe0;
- g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0;
- g2_dma->channel[chan_nr].size = (chan->count & ~31) | 0x80000000;
- g2_dma->channel[chan_nr].direction = chan->mode;
-
- /*
- * bit 0 - ???
- * bit 1 - if set, generate a hardware event on transfer completion
- * bit 2 - ??? something to do with suspend?
- */
- g2_dma->channel[chan_nr].ctrl = 5; /* ?? */
-
- g2_enable_dma(chan);
-
- /* debug cruft */
- pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, "
- "0x%08lx, %ld, %ld, %ld, %ld\n",
- g2_dma->channel[chan_nr].size,
- g2_dma->channel[chan_nr].root_addr,
- g2_dma->channel[chan_nr].g2_addr,
- g2_dma->channel[chan_nr].direction,
- g2_dma->channel[chan_nr].ctrl,
- g2_dma->channel[chan_nr].chan_enable,
- g2_dma->channel[chan_nr].xfer_enable);
-
- return 0;
-}
-
-static int g2_get_residue(struct dma_channel *chan)
-{
- return g2_bytes_remaining(chan->chan);
-}
-
-static struct dma_ops g2_dma_ops = {
- .xfer = g2_xfer_dma,
- .get_residue = g2_get_residue,
-};
-
-static struct dma_info g2_dma_info = {
- .name = "g2_dmac",
- .nr_channels = 4,
- .ops = &g2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init g2_dma_init(void)
-{
- int ret;
-
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
- "g2 DMA handler", &g2_dma_info);
- if (unlikely(ret))
- return -EINVAL;
-
- /* Magic */
- g2_dma->wait_state = 27;
- g2_dma->magic = 0x4659404f;
-
- ret = register_dmac(&g2_dma_info);
- if (unlikely(ret != 0))
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
-
- return ret;
-}
-
-static void __exit g2_dma_exit(void)
-{
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
- unregister_dmac(&g2_dma_info);
-}
-
-subsys_initcall(g2_dma_init);
-module_exit(g2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("G2 bus DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
deleted file mode 100644
index 21c347543e193d..00000000000000
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-pvr2.c
- *
- * NEC PowerVR 2 (Dreamcast) DMA support
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-static unsigned int xfer_complete;
-static int count;
-
-static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
-{
- if (get_dma_residue(PVR2_CASCADE_CHAN)) {
- printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
- "on channel %d, waiting..\n", PVR2_CASCADE_CHAN);
- dma_wait_for_completion(PVR2_CASCADE_CHAN);
- }
-
- if (count++ < 10)
- pr_debug("Got a pvr2 dma interrupt for channel %d\n",
- irq - HW_EVENT_PVR2_DMA);
-
- xfer_complete = 1;
-
- return IRQ_HANDLED;
-}
-
-static int pvr2_request_dma(struct dma_channel *chan)
-{
- if (__raw_readl(PVR2_DMA_MODE) != 0)
- return -EBUSY;
-
- __raw_writel(0, PVR2_DMA_LMMODE0);
-
- return 0;
-}
-
-static int pvr2_get_dma_residue(struct dma_channel *chan)
-{
- return xfer_complete == 0;
-}
-
-static int pvr2_xfer_dma(struct dma_channel *chan)
-{
- if (chan->sar || !chan->dar)
- return -EINVAL;
-
- xfer_complete = 0;
-
- __raw_writel(chan->dar, PVR2_DMA_ADDR);
- __raw_writel(chan->count, PVR2_DMA_COUNT);
- __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
-
- return 0;
-}
-
-static struct dma_ops pvr2_dma_ops = {
- .request = pvr2_request_dma,
- .get_residue = pvr2_get_dma_residue,
- .xfer = pvr2_xfer_dma,
-};
-
-static struct dma_info pvr2_dma_info = {
- .name = "pvr2_dmac",
- .nr_channels = 1,
- .ops = &pvr2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init pvr2_dma_init(void)
-{
- if (request_irq(HW_EVENT_PVR2_DMA, pvr2_dma_interrupt, 0,
- "pvr2 DMA handler", NULL))
- pr_err("Failed to register pvr2 DMA handler interrupt\n");
- request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade");
-
- return register_dmac(&pvr2_dma_info);
-}
-
-static void __exit pvr2_dma_exit(void)
-{
- free_dma(PVR2_CASCADE_CHAN);
- free_irq(HW_EVENT_PVR2_DMA, 0);
- unregister_dmac(&pvr2_dma_info);
-}
-
-subsys_initcall(pvr2_dma_init);
-module_exit(pvr2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
deleted file mode 100644
index 96c626c2cd0a49..00000000000000
--- a/arch/sh/drivers/dma/dma-sh.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sh.c
- *
- * SuperH On-chip DMAC Support
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach-dreamcast/mach/dma.h>
-#include <asm/dma.h>
-#include <asm/dma-register.h>
-#include <cpu/dma-register.h>
-#include <cpu/dma.h>
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
-
-static unsigned long dma_find_base(unsigned int chan)
-{
- unsigned long base = SH_DMAC_BASE0;
-
-#ifdef SH_DMAC_BASE1
- if (chan >= 6)
- base = SH_DMAC_BASE1;
-#endif
-
- return base;
-}
-
-static unsigned long dma_base_addr(unsigned int chan)
-{
- unsigned long base = dma_find_base(chan);
-
- /* Normalize offset calculation */
- if (chan >= 9)
- chan -= 6;
- if (chan >= 4)
- base += 0x10;
-
- return base + (chan * 0x10);
-}
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return chan >= 6 ? DMTE6_IRQ : DMTE0_IRQ;
-}
-#else
-
-static unsigned int dmte_irq_map[] = {
- DMTE0_IRQ, DMTE0_IRQ + 1, DMTE0_IRQ + 2, DMTE0_IRQ + 3,
-
-#ifdef DMTE4_IRQ
- DMTE4_IRQ, DMTE4_IRQ + 1,
-#endif
-
-#ifdef DMTE6_IRQ
- DMTE6_IRQ, DMTE6_IRQ + 1,
-#endif
-
-#ifdef DMTE8_IRQ
- DMTE8_IRQ, DMTE9_IRQ, DMTE10_IRQ, DMTE11_IRQ,
-#endif
-};
-
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return dmte_irq_map[chan];
-}
-#endif
-
-/*
- * We determine the correct shift size based off of the CHCR transmit size
- * for the given channel. Since we know that it will take:
- *
- * info->count >> ts_shift[transmit_size]
- *
- * iterations to complete the transfer.
- */
-static unsigned int ts_shift[] = TS_SHIFT;
-
-static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
-{
- u32 chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
- ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
-
- return ts_shift[cnt];
-}
-
-/*
- * The transfer end interrupt must read the chcr register to end the
- * hardware interrupt active condition.
- * Besides that it needs to waken any waiting process, which should handle
- * setting up the next transfer.
- */
-static irqreturn_t dma_tei(int irq, void *dev_id)
-{
- struct dma_channel *chan = dev_id;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
-
- if (!(chcr & CHCR_TE))
- return IRQ_NONE;
-
- chcr &= ~(CHCR_IE | CHCR_DE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
-}
-
-static int sh_dmac_request_dma(struct dma_channel *chan)
-{
- if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
- return 0;
-
- return request_irq(get_dmte_irq(chan->chan), dma_tei, IRQF_SHARED,
- chan->dev_id, chan);
-}
-
-static void sh_dmac_free_dma(struct dma_channel *chan)
-{
- free_irq(get_dmte_irq(chan->chan), chan);
-}
-
-static int
-sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
-{
- if (!chcr)
- chcr = RS_DUAL | CHCR_IE;
-
- if (chcr & CHCR_IE) {
- chcr &= ~CHCR_IE;
- chan->flags |= DMA_TEI_CAPABLE;
- } else {
- chan->flags &= ~DMA_TEI_CAPABLE;
- }
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- chan->flags |= DMA_CONFIGURED;
- return 0;
-}
-
-static void sh_dmac_enable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr |= CHCR_DE;
-
- if (chan->flags & DMA_TEI_CAPABLE)
- chcr |= CHCR_IE;
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- enable_irq(irq);
- }
-}
-
-static void sh_dmac_disable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- disable_irq(irq);
- }
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-}
-
-static int sh_dmac_xfer_dma(struct dma_channel *chan)
-{
- /*
- * If we haven't pre-configured the channel with special flags, use
- * the defaults.
- */
- if (unlikely(!(chan->flags & DMA_CONFIGURED)))
- sh_dmac_configure_channel(chan, 0);
-
- sh_dmac_disable_dma(chan);
-
- /*
- * Single-address mode usage note!
- *
- * It's important that we don't accidentally write any value to SAR/DAR
- * (this includes 0) that hasn't been directly specified by the user if
- * we're in single-address mode.
- *
- * In this case, only one address can be defined, anything else will
- * result in a DMA address error interrupt (at least on the SH-4),
- * which will subsequently halt the transfer.
- *
- * Channel 2 on the Dreamcast is a special case, as this is used for
- * cascading to the PVR2 DMAC. In this case, we still need to write
- * SAR and DAR, regardless of value, in order for cascading to work.
- */
- if (chan->sar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->sar, (dma_base_addr(chan->chan) + SAR));
- if (chan->dar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->dar, (dma_base_addr(chan->chan) + DAR));
-
- __raw_writel(chan->count >> calc_xmit_shift(chan),
- (dma_base_addr(chan->chan) + TCR));
-
- sh_dmac_enable_dma(chan);
-
- return 0;
-}
-
-static int sh_dmac_get_dma_residue(struct dma_channel *chan)
-{
- if (!(__raw_readl(dma_base_addr(chan->chan) + CHCR) & CHCR_DE))
- return 0;
-
- return __raw_readl(dma_base_addr(chan->chan) + TCR)
- << calc_xmit_shift(chan);
-}
-
-/*
- * DMAOR handling
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define NR_DMAOR 2
-#else
-#define NR_DMAOR 1
-#endif
-
-/*
- * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
- * channels 0 - 5, DMAOR1 6 - 11 (optional).
- */
-#define dmaor_read_reg(n) __raw_readw(dma_find_base((n)*6))
-#define dmaor_write_reg(n, data) __raw_writew(data, dma_find_base(n)*6)
-
-static inline int dmaor_reset(int no)
-{
- unsigned long dmaor = dmaor_read_reg(no);
-
- /* Try to clear the error flags first, incase they are set */
- dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
- dmaor_write_reg(no, dmaor);
-
- dmaor |= DMAOR_INIT;
- dmaor_write_reg(no, dmaor);
-
- /* See if we got an error again */
- if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
- printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * DMAE handling
- */
-#ifdef CONFIG_CPU_SH4
-
-#if defined(DMAE1_IRQ)
-#define NR_DMAE 2
-#else
-#define NR_DMAE 1
-#endif
-
-static const char *dmae_name[] = {
- "DMAC Address Error0",
- "DMAC Address Error1"
-};
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dma_error_irq(int n)
-{
- return get_dmte_irq(n * 6);
-}
-#else
-
-static unsigned int dmae_irq_map[] = {
- DMAE0_IRQ,
-
-#ifdef DMAE1_IRQ
- DMAE1_IRQ,
-#endif
-};
-
-static inline unsigned int get_dma_error_irq(int n)
-{
- return dmae_irq_map[n];
-}
-#endif
-
-static irqreturn_t dma_err(int irq, void *dummy)
-{
- int i;
-
- for (i = 0; i < NR_DMAOR; i++)
- dmaor_reset(i);
-
- disable_irq(irq);
-
- return IRQ_HANDLED;
-}
-
-static int dmae_irq_init(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++) {
- int i = request_irq(get_dma_error_irq(n), dma_err,
- IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
- if (unlikely(i < 0)) {
- printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
- return i;
- }
- }
-
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++)
- free_irq(get_dma_error_irq(n), NULL);
-}
-#else
-static inline int dmae_irq_init(void)
-{
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
-}
-#endif
-
-static struct dma_ops sh_dmac_ops = {
- .request = sh_dmac_request_dma,
- .free = sh_dmac_free_dma,
- .get_residue = sh_dmac_get_dma_residue,
- .xfer = sh_dmac_xfer_dma,
- .configure = sh_dmac_configure_channel,
-};
-
-static struct dma_info sh_dmac_info = {
- .name = "sh_dmac",
- .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
- .ops = &sh_dmac_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init sh_dmac_init(void)
-{
- struct dma_info *info = &sh_dmac_info;
- int i, rc;
-
- /*
- * Initialize DMAE, for parts that support it.
- */
- rc = dmae_irq_init();
- if (unlikely(rc != 0))
- return rc;
-
- /*
- * Initialize DMAOR, and clean up any error flags that may have
- * been set.
- */
- for (i = 0; i < NR_DMAOR; i++) {
- rc = dmaor_reset(i);
- if (unlikely(rc != 0))
- return rc;
- }
-
- return register_dmac(info);
-}
-
-static void __exit sh_dmac_exit(void)
-{
- dmae_irq_free();
- unregister_dmac(&sh_dmac_info);
-}
-
-subsys_initcall(sh_dmac_init);
-module_exit(sh_dmac_exit);
-
-MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
-MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
deleted file mode 100644
index 8ef318150f84db..00000000000000
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sysfs.c
- *
- * sysfs interface for SH DMA API
- *
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <asm/dma.h>
-
-static struct bus_type dma_subsys = {
- .name = "dma",
- .dev_name = "dma",
-};
-
-static ssize_t dma_show_devices(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- ssize_t len = 0;
- int i;
-
- for (i = 0; i < 16; i++) {
- struct dma_info *info = get_dma_info(i);
- struct dma_channel *channel = get_dma_channel(i);
-
- if (unlikely(!info) || !channel)
- continue;
-
- len += sprintf(buf + len, "%2d: %14s %s\n",
- channel->chan, info->name,
- channel->dev_id);
- }
-
- return len;
-}
-
-static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
-
-static int __init dma_subsys_init(void)
-{
- int ret;
-
- ret = subsys_system_register(&dma_subsys, NULL);
- if (unlikely(ret))
- return ret;
-
- return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
-}
-postcore_initcall(dma_subsys_init);
-
-static ssize_t dma_show_dev_id(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "%s\n", channel->dev_id);
-}
-
-static ssize_t dma_store_dev_id(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- strcpy(channel->dev_id, buf);
- return count;
-}
-
-static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
-
-static ssize_t dma_store_config(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- unsigned long config;
-
- config = simple_strtoul(buf, NULL, 0);
- dma_configure_channel(channel->vchan, config);
-
- return count;
-}
-
-static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
-
-static ssize_t dma_show_mode(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "0x%08x\n", channel->mode);
-}
-
-static ssize_t dma_store_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- channel->mode = simple_strtoul(buf, NULL, 0);
- return count;
-}
-
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
-
-#define dma_ro_attr(field, fmt) \
-static ssize_t dma_show_##field(struct device *dev, \
- struct device_attribute *attr, char *buf)\
-{ \
- struct dma_channel *channel = to_dma_channel(dev); \
- return sprintf(buf, fmt, channel->field); \
-} \
-static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
-
-dma_ro_attr(count, "0x%08x\n");
-dma_ro_attr(flags, "0x%08lx\n");
-
-int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
- int ret;
-
- dev->id = chan->vchan;
- dev->bus = &dma_subsys;
-
- ret = device_register(dev);
- if (ret)
- return ret;
-
- ret |= device_create_file(dev, &dev_attr_dev_id);
- ret |= device_create_file(dev, &dev_attr_count);
- ret |= device_create_file(dev, &dev_attr_mode);
- ret |= device_create_file(dev, &dev_attr_flags);
- ret |= device_create_file(dev, &dev_attr_config);
-
- if (unlikely(ret)) {
- dev_err(&info->pdev->dev, "Failed creating attrs\n");
- return ret;
- }
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
-}
-
-void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
-
- device_remove_file(dev, &dev_attr_dev_id);
- device_remove_file(dev, &dev_attr_count);
- device_remove_file(dev, &dev_attr_mode);
- device_remove_file(dev, &dev_attr_flags);
- device_remove_file(dev, &dev_attr_config);
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- sysfs_remove_link(&info->pdev->dev.kobj, name);
-
- device_unregister(dev);
-}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
deleted file mode 100644
index 5b2c1fd254d729..00000000000000
--- a/arch/sh/drivers/dma/dmabrg.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 DMABRG IRQ handling
- *
- * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-#include <asm/dmabrg.h>
-#include <asm/io.h>
-
-/*
- * The DMABRG is a special DMA unit within the SH7760. It does transfers
- * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
- * part is sensibly placed in the LCDC registers and requires no irqs)
- * It has 3 IRQ lines which trigger 10 events, and works independently
- * from the traditional SH DMAC (although it blocks usage of DMAC 0)
- *
- * BRGIRQID | component | dir | meaning | source
- * -----------------------------------------------------
- * 0 | USB-DMA | ... | xfer done | DMABRGI1
- * 1 | USB-UAE | ... | USB addr err.| DMABRGI0
- * 2 | HAC0/SSI0 | play| all done | DMABRGI1
- * 3 | HAC0/SSI0 | play| half done | DMABRGI2
- * 4 | HAC0/SSI0 | rec | all done | DMABRGI1
- * 5 | HAC0/SSI0 | rec | half done | DMABRGI2
- * 6 | HAC1/SSI1 | play| all done | DMABRGI1
- * 7 | HAC1/SSI1 | play| half done | DMABRGI2
- * 8 | HAC1/SSI1 | rec | all done | DMABRGI1
- * 9 | HAC1/SSI1 | rec | half done | DMABRGI2
- *
- * all can be enabled/disabled in the DMABRGCR register,
- * as well as checked if they occurred.
- *
- * DMABRGI0 services USB DMA Address errors, but it still must be
- * enabled/acked in the DMABRGCR register. USB-DMA complete indicator
- * is grouped together with the audio buffer end indicators, too bad...
- *
- * DMABRGCR: Bits 31-24: audio-dma ENABLE flags,
- * Bits 23-16: audio-dma STATUS flags,
- * Bits 9-8: USB error/xfer ENABLE,
- * Bits 1-0: USB error/xfer STATUS.
- * Ack an IRQ by writing 0 to the STATUS flag.
- * Mask IRQ by writing 0 to ENABLE flag.
- *
- * Usage is almost like with any other IRQ:
- * dmabrg_request_irq(BRGIRQID, handler, data)
- * dmabrg_free_irq(BRGIRQID)
- *
- * handler prototype: void brgirqhandler(void *data)
- */
-
-#define DMARSRA 0xfe090000
-#define DMAOR 0xffa00040
-#define DMACHCR0 0xffa0000c
-#define DMABRGCR 0xfe3c0000
-
-#define DMAOR_BRG 0x0000c000
-#define DMAOR_DMEN 0x00000001
-
-#define DMABRGI0 68
-#define DMABRGI1 69
-#define DMABRGI2 70
-
-struct dmabrg_handler {
- void (*handler)(void *);
- void *data;
-} *dmabrg_handlers;
-
-static inline void dmabrg_call_handler(int i)
-{
- dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
-}
-
-/*
- * main DMABRG irq handler. It acks irqs and then
- * handles every set and unmasked bit sequentially.
- * No locking and no validity checks; it should be
- * as fast as possible (audio!)
- */
-static irqreturn_t dmabrg_irq(int irq, void *data)
-{
- unsigned long dcr;
- unsigned int i;
-
- dcr = __raw_readl(DMABRGCR);
- __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
- dcr &= dcr >> 8; /* ignore masked */
-
- /* USB stuff, get it out of the way first */
- if (dcr & 1)
- dmabrg_call_handler(DMABRGIRQ_USBDMA);
- if (dcr & 2)
- dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
-
- /* Audio */
- dcr >>= 16;
- while (dcr) {
- i = __ffs(dcr);
- dcr &= dcr - 1;
- dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
- }
- return IRQ_HANDLED;
-}
-
-static void dmabrg_disable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-static void dmabrg_enable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
- void *data)
-{
- if ((dmairq > 9) || !handler)
- return -ENOENT;
- if (dmabrg_handlers[dmairq].handler)
- return -EBUSY;
-
- dmabrg_handlers[dmairq].handler = handler;
- dmabrg_handlers[dmairq].data = data;
-
- dmabrg_enable_irq(dmairq);
- return 0;
-}
-EXPORT_SYMBOL_GPL(dmabrg_request_irq);
-
-void dmabrg_free_irq(unsigned int dmairq)
-{
- if (likely(dmairq < 10)) {
- dmabrg_disable_irq(dmairq);
- dmabrg_handlers[dmairq].handler = NULL;
- dmabrg_handlers[dmairq].data = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(dmabrg_free_irq);
-
-static int __init dmabrg_init(void)
-{
- unsigned long or;
- int ret;
-
- dmabrg_handlers = kcalloc(10, sizeof(struct dmabrg_handler),
- GFP_KERNEL);
- if (!dmabrg_handlers)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_DMA
- /* request DMAC channel 0 before anyone else can get it */
- ret = request_dma(0, "DMAC 0 (DMABRG)");
- if (ret < 0)
- printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
-#endif
-
- __raw_writel(0, DMABRGCR);
- __raw_writel(0, DMACHCR0);
- __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
-
- /* enable DMABRG mode, enable the DMAC */
- or = __raw_readl(DMAOR);
- __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
-
- ret = request_irq(DMABRGI0, dmabrg_irq, 0,
- "DMABRG USB address error", NULL);
- if (ret)
- goto out0;
-
- ret = request_irq(DMABRGI1, dmabrg_irq, 0,
- "DMABRG Transfer End", NULL);
- if (ret)
- goto out1;
-
- ret = request_irq(DMABRGI2, dmabrg_irq, 0,
- "DMABRG Transfer Half", NULL);
- if (ret == 0)
- return ret;
-
- free_irq(DMABRGI1, NULL);
-out1: free_irq(DMABRGI0, NULL);
-out0: kfree(dmabrg_handlers);
- return ret;
-}
-subsys_initcall(dmabrg_init);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
deleted file mode 100644
index 24391b444b286d..00000000000000
--- a/arch/sh/drivers/heartbeat.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic heartbeat driver for regular LED banks
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- *
- * Most SH reference boards include a number of individual LEDs that can
- * be independently controlled (either via a pre-defined hardware
- * function or via the LED class, if desired -- the hardware tends to
- * encapsulate some of the same "triggers" that the LED class supports,
- * so there's not too much value in it).
- *
- * Additionally, most of these boards also have a LED bank that we've
- * traditionally used for strobing the load average. This use case is
- * handled by this driver, rather than giving each LED bit position its
- * own struct device.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/sched/loadavg.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <asm/heartbeat.h>
-
-#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.2"
-
-static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-
-static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
- unsigned bit, unsigned int inverted)
-{
- unsigned int new;
-
- new = (1 << hd->bit_pos[bit]);
- if (inverted)
- new = ~new;
-
- new &= hd->mask;
-
- switch (hd->regsize) {
- case 32:
- new |= ioread32(hd->base) & ~hd->mask;
- iowrite32(new, hd->base);
- break;
- case 16:
- new |= ioread16(hd->base) & ~hd->mask;
- iowrite16(new, hd->base);
- break;
- default:
- new |= ioread8(hd->base) & ~hd->mask;
- iowrite8(new, hd->base);
- break;
- }
-}
-
-static void heartbeat_timer(struct timer_list *t)
-{
- struct heartbeat_data *hd = from_timer(hd, t, timer);
- static unsigned bit = 0, up = 1;
-
- heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED);
-
- bit += up;
- if ((bit == 0) || (bit == (hd->nr_bits)-1))
- up = -up;
-
- mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
- ((avenrun[0] / 5) + (3 << FSHIFT)))));
-}
-
-static int heartbeat_drv_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct heartbeat_data *hd;
- int i;
-
- if (unlikely(pdev->num_resources != 1)) {
- dev_err(&pdev->dev, "invalid number of resources\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- if (pdev->dev.platform_data) {
- hd = pdev->dev.platform_data;
- } else {
- hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
- if (unlikely(!hd))
- return -ENOMEM;
- }
-
- hd->base = ioremap(res->start, resource_size(res));
- if (unlikely(!hd->base)) {
- dev_err(&pdev->dev, "ioremap failed\n");
-
- if (!pdev->dev.platform_data)
- kfree(hd);
-
- return -ENXIO;
- }
-
- if (!hd->nr_bits) {
- hd->bit_pos = default_bit_pos;
- hd->nr_bits = ARRAY_SIZE(default_bit_pos);
- }
-
- hd->mask = 0;
- for (i = 0; i < hd->nr_bits; i++)
- hd->mask |= (1 << hd->bit_pos[i]);
-
- if (!hd->regsize) {
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_32BIT:
- hd->regsize = 32;
- break;
- case IORESOURCE_MEM_16BIT:
- hd->regsize = 16;
- break;
- case IORESOURCE_MEM_8BIT:
- default:
- hd->regsize = 8;
- break;
- }
- }
-
- timer_setup(&hd->timer, heartbeat_timer, 0);
- platform_set_drvdata(pdev, hd);
-
- return mod_timer(&hd->timer, jiffies + 1);
-}
-
-static struct platform_driver heartbeat_driver = {
- .probe = heartbeat_drv_probe,
- .driver = {
- .name = DRV_NAME,
- .suppress_bind_attrs = true,
- },
-};
-
-static int __init heartbeat_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&heartbeat_driver);
-}
-device_initcall(heartbeat_init);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
deleted file mode 100644
index d313fd3ce7091e..00000000000000
--- a/arch/sh/drivers/pci/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the PCI specific kernel interface routines under Linux.
-#
-obj-y += common.o pci.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
-
-obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
- pci-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
-obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03) += fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7786) += fixups-sdk7786.o
-obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN) += fixups-titan.o
-obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
deleted file mode 100644
index 2fd2b77e12cec1..00000000000000
--- a/arch/sh/drivers/pci/common.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
- int top_bus, int busnr, int devfn)
-{
- static struct pci_dev dev;
- static struct pci_bus bus;
-
- dev.bus = &bus;
- dev.sysdata = hose;
- dev.devfn = devfn;
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose->pci_ops;
-
- if(busnr != top_bus)
- /* Fake a parent bus structure. */
- bus.parent = &bus;
- else
- bus.parent = NULL;
-
- return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int __init early_##rw##_config_##size(struct pci_channel *hose, \
- int top_bus, int bus, int devfn, int offset, type value) \
-{ \
- return pci_##rw##_config_##size( \
- fake_pci_dev(hose, top_bus, bus, devfn), \
- offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-int __init pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus)
-{
- u32 pci_devfn;
- unsigned short vid;
- int cap66 = -1;
- u16 stat;
-
- pr_info("PCI: Checking 66MHz capabilities...\n");
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- if (early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_VENDOR_ID, &vid) !=
- PCIBIOS_SUCCESSFUL)
- continue;
- if (vid == 0xffff)
- continue;
-
- /* check 66MHz capability */
- if (cap66 < 0)
- cap66 = 1;
- if (cap66) {
- early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &stat);
- if (!(stat & PCI_STATUS_66MHZ)) {
- printk(KERN_DEBUG
- "PCI: %02x:%02x not 66MHz capable.\n",
- current_bus, pci_devfn);
- cap66 = 0;
- break;
- }
- }
- }
-
- return cap66 > 0;
-}
-
-static void pcibios_enable_err(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, err_timer);
-
- del_timer(&hose->err_timer);
- printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
- enable_irq(hose->err_irq);
-}
-
-static void pcibios_enable_serr(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, serr_timer);
-
- del_timer(&hose->serr_timer);
- printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
- enable_irq(hose->serr_irq);
-}
-
-void pcibios_enable_timers(struct pci_channel *hose)
-{
- if (hose->err_irq) {
- timer_setup(&hose->err_timer, pcibios_enable_err, 0);
- }
-
- if (hose->serr_irq) {
- timer_setup(&hose->serr_timer, pcibios_enable_serr, 0);
- }
-}
-
-/*
- * A simple handler for the regular PCI status errors, called from IRQ
- * context.
- */
-unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status,
- struct pci_channel *hose)
-{
- unsigned int cmd = 0;
-
- if (status & PCI_STATUS_REC_MASTER_ABORT) {
- printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
- cmd |= PCI_STATUS_REC_MASTER_ABORT;
- }
-
- if (status & PCI_STATUS_REC_TARGET_ABORT) {
- printk(KERN_DEBUG "PCI: target abort: ");
- pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_REC_TARGET_ABORT;
- }
-
- if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
- printk(KERN_DEBUG "PCI: parity error detected: ");
- pcibios_report_status(PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
-
- /* Now back off of the IRQ for awhile */
- if (hose->err_irq) {
- disable_irq_nosync(hose->err_irq);
- hose->err_timer.expires = jiffies + HZ;
- add_timer(&hose->err_timer);
- }
- }
-
- return cmd;
-}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
deleted file mode 100644
index 41e4daee8f043f..00000000000000
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-dreamcast.c
- *
- * PCI fixups for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003, 2006 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/dma-map-ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static void gapspci_fixup_resources(struct pci_dev *dev)
-{
- struct pci_channel *p = dev->sysdata;
- struct resource res;
- struct pci_bus_region region;
-
- printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
-
- switch (dev->device) {
- case PCI_DEVICE_ID_SEGA_BBA:
- /*
- * We also assume that dev->devfn == 0
- */
- dev->resource[1].start = p->resources[0].start + 0x100;
- dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
-
- /*
- * This is not a normal BAR, prevent any attempts to move
- * the BAR, as this will result in a bus lock.
- */
- dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
-
- /*
- * Redirect dma memory allocations to special memory window.
- *
- * If this GAPSPCI region were mapped by a BAR, the CPU
- * phys_addr_t would be pci_resource_start(), and the bus
- * address would be pci_bus_address(pci_resource_start()).
- * But apparently there's no BAR mapping it, so we just
- * "know" its CPU address is GAPSPCI_DMA_BASE.
- */
- res.start = GAPSPCI_DMA_BASE;
- res.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1;
- res.flags = IORESOURCE_MEM;
- pcibios_resource_to_bus(dev->bus, ®ion, &res);
- BUG_ON(dma_declare_coherent_memory(&dev->dev,
- res.start,
- region.start,
- resource_size(&res)));
- break;
- default:
- printk("PCI: Failed resource fixup\n");
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The interrupt routing semantics here are quite trivial.
- *
- * We basically only support one interrupt, so we only bother
- * updating a device's interrupt line with this single shared
- * interrupt. Keeps routing quite simple, doesn't it?
- */
- return GAPSPCI_IRQ;
-}
diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
deleted file mode 100644
index 53fa2fc87eec28..00000000000000
--- a/arch/sh/drivers/pci/fixups-landisk.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-landisk.c
- *
- * PCI initialization for the I-O DATA Device, Inc. LANDISK board
- *
- * Copyright (C) 2006 kogiidena
- * Copyright (C) 2010 Nobuhiro Iwamatsu
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- /*
- * slot0: pin1-4 = irq5,6,7,8
- * slot1: pin1-4 = irq6,7,8,5
- * slot2: pin1-4 = irq7,8,5,6
- * slot3: pin1-4 = irq8,5,6,7
- */
- int irq = ((slot + pin - 1) & 0x3) + evt2irq(0x2a0);
-
- if ((slot | (pin - 1)) > 0x3) {
- printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n",
- slot, pin - 1 + 'A');
- return -1;
- }
- return irq;
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
deleted file mode 100644
index 3c9139c5955e6d..00000000000000
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-r7780rp.c
- *
- * Highlander R7780RP-1 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xa20) + slot;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
deleted file mode 100644
index 3f0a6fe1610b61..00000000000000
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-rts7751r2d.c
- *
- * RTS7751R2D / LBOXRE2 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <mach/lboxre2.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-#include <generated/machtypes.h>
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-static u8 rts7751r2d_irq_tab[] = {
- IRQ_PCI_INTA,
- IRQ_PCI_INTB,
- IRQ_PCI_INTC,
- IRQ_PCI_INTD,
-};
-
-static char lboxre2_irq_tab[] = {
- IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- if (mach_is_lboxre2())
- return lboxre2_irq_tab[slot];
- else
- return rts7751r2d_irq_tab[slot];
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- /* Enable all interrupts, so we known what to fix */
- pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
- pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
deleted file mode 100644
index c306040485bd23..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-sdk7780.c
- *
- * PCI fixups for the SDK7780SE03
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define IRQ_INTA evt2irq(0xa20)
-#define IRQ_INTB evt2irq(0xa40)
-#define IRQ_INTC evt2irq(0xa60)
-#define IRQ_INTD evt2irq(0xa80)
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] = {
- /* INTA */
- { IRQ_INTA, IRQ_INTD, IRQ_INTC, IRQ_INTD, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { IRQ_INTB, IRQ_INTA, -1, IRQ_INTA, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTC */
- { IRQ_INTC, IRQ_INTB, -1, IRQ_INTB, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTD */
- { IRQ_INTD, IRQ_INTC, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1 },
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return sdk7780_irq_tab[pin-1][slot];
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7786.c b/arch/sh/drivers/pci/fixups-sdk7786.c
deleted file mode 100644
index 6972af7b4e93d5..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7786.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA PCIe mux handling
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <mach/fpga.h>
-
-/*
- * The SDK7786 FPGA supports mangling of most of the slots in some way or
- * another. Slots 3/4 are special in that only one can be supported at a
- * time, and both appear on port 3 to the PCI bus scan. Enabling slot 4
- * (the horizontal edge connector) will disable slot 3 entirely.
- *
- * Misconfigurations can be detected through the FPGA via the slot
- * resistors to determine card presence. Hotplug remains unsupported.
- */
-static unsigned int slot4en __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (strcmp(str, "slot4en") == 0) {
- slot4en = 1;
- return NULL;
- }
-
- return str;
-}
-
-static int __init sdk7786_pci_init(void)
-{
- u16 data = fpga_read_reg(PCIECR);
-
- /*
- * Enable slot #4 if it's been specified on the command line.
- *
- * Optionally reroute if slot #4 has a card present while slot #3
- * does not, regardless of command line value.
- *
- * Card presence is logically inverted.
- */
- slot4en ?: (!(data & PCIECR_PRST4) && (data & PCIECR_PRST3));
- if (slot4en) {
- pr_info("Activating PCIe slot#4 (disabling slot#3)\n");
-
- data &= ~PCIECR_PCIEMUX1;
- fpga_write_reg(data, PCIECR);
-
- /* Warn about forced rerouting if slot#3 is occupied */
- if ((data & PCIECR_PRST3) == 0) {
- pr_warn("Unreachable card detected in slot#3\n");
- return -EBUSY;
- }
- } else
- pr_info("PCIe slot#4 disabled\n");
-
- return 0;
-}
-postcore_initcall(sdk7786_pci_init);
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
deleted file mode 100644
index 608f6521ceffcd..00000000000000
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *, u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return evt2irq(0x3a0);
- case 1: return evt2irq(0x3a0); /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
deleted file mode 100644
index 7ec4a74ab12c45..00000000000000
--- a/arch/sh/drivers/pci/fixups-sh03.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (dev->bus->number == 0) {
- switch (slot) {
- case 4: return evt2irq(0x2a0); /* eth0 */
- case 8: return evt2irq(0x2a0); /* eth1 */
- case 6: return evt2irq(0x240); /* PCI bridge */
- default:
- printk(KERN_ERR "PCI: Bad IRQ mapping request "
- "for slot %d\n", slot);
- return evt2irq(0x240);
- }
- } else {
- switch (pin) {
- case 0: irq = evt2irq(0x240); break;
- case 1: irq = evt2irq(0x240); break;
- case 2: irq = evt2irq(0x240); break;
- case 3: irq = evt2irq(0x240); break;
- case 4: irq = evt2irq(0x240); break;
- default: irq = -1; break;
- }
- }
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
deleted file mode 100644
index 317225c094137f..00000000000000
--- a/arch/sh/drivers/pci/fixups-snapgear.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author: David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (slot) {
- case 8: /* the PCI bridge */ break;
- case 11: irq = evt2irq(0x300); break; /* USB */
- case 12: irq = evt2irq(0x360); break; /* PCMCIA */
- case 13: irq = evt2irq(0x2a0); break; /* eth0 */
- case 14: irq = evt2irq(0x300); break; /* eth1 */
- case 15: irq = evt2irq(0x360); break; /* safenet (unused) */
- }
-
- printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c
deleted file mode 100644
index b5bb65caa16d6f..00000000000000
--- a/arch/sh/drivers/pci/fixups-titan.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-titan.c
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Modified from ops-snapgear.c written by David McCullough
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the Titan boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/titan.h>
-#include "pci-sh4.h"
-
-static char titan_irq_tab[] = {
- TITAN_IRQ_WAN,
- TITAN_IRQ_LAN,
- TITAN_IRQ_MPCIA,
- TITAN_IRQ_MPCIB,
- TITAN_IRQ_USB,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = titan_irq_tab[slot];
-
- printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
deleted file mode 100644
index 517a8a9702f662..00000000000000
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI operations for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/pci.h>
-
-/*
- * The !gapspci_config_access case really shouldn't happen, ever, unless
- * someone implicitly messes around with the last devfn value.. otherwise we
- * only support a single device anyways, and if we didn't have a BBA, we
- * wouldn't make it terribly far through the PCI setup anyways.
- *
- * Also, we could very easily support both Type 0 and Type 1 configurations
- * here, but since it doesn't seem that there is any such implementation in
- * existence, we don't bother.
- *
- * I suppose if someone actually gets around to ripping the chip out of
- * the BBA and hanging some more devices off of it, then this might be
- * something to take into consideration. However, due to the cost of the BBA,
- * and the general lack of activity by DC hardware hackers, this doesn't seem
- * likely to happen anytime soon.
- */
-static int gapspci_config_access(unsigned char bus, unsigned int devfn)
-{
- return (bus == 0) && (devfn == 0);
-}
-
-/*
- * We can also actually read and write in b/w/l sizes! Thankfully this part
- * was at least done right, and we don't have to do the stupid masking and
- * shifting that we do on the 7751! Small wonders never cease to amaze.
- */
-static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
- *val = 0xffffffff;
-
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops gapspci_pci_ops = {
- .read = gapspci_read,
- .write = gapspci_write,
-};
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
deleted file mode 100644
index a205be3bfc4a67..00000000000000
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <asm/addrspace.h>
-#include "pci-sh4.h"
-
-/*
- * Direct access to PCI hardware...
- */
-#define CONFIG_CMD(bus, devfn, where) \
- (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- u32 data;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since SH4 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- int shift;
- u32 data;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- pci_write_reg(chan, data, SH4_PCIPDR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops sh4_pci_ops = {
- .read = sh4_pci_read,
- .write = sh4_pci_write,
-};
-
-int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
-{
- /* Nothing to do. */
- return 0;
-}
diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
deleted file mode 100644
index a10f9f4ebd7fe9..00000000000000
--- a/arch/sh/drivers/pci/ops-sh7786.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH7786 PCI-Express operations.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include "pcie-sh7786.h"
-
-enum {
- PCI_ACCESS_READ,
- PCI_ACCESS_WRITE,
-};
-
-static int sh7786_pcie_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
-{
- struct pci_channel *chan = bus->sysdata;
- int dev, func, type, reg;
-
- dev = PCI_SLOT(devfn);
- func = PCI_FUNC(devfn);
- type = !!bus->parent;
- reg = where & ~3;
-
- if (bus->number > 255 || dev > 31 || func > 7)
- return PCIBIOS_FUNC_NOT_SUPPORTED;
-
- /*
- * While each channel has its own memory-mapped extended config
- * space, it's generally only accessible when in endpoint mode.
- * When in root complex mode, the controller is unable to target
- * itself with either type 0 or type 1 accesses, and indeed, any
- * controller initiated target transfer to its own config space
- * result in a completer abort.
- *
- * Each channel effectively only supports a single device, but as
- * the same channel <-> device access works for any PCI_SLOT()
- * value, we cheat a bit here and bind the controller's config
- * space to devfn 0 in order to enable self-enumeration. In this
- * case the regular PAR/PDR path is sidelined and the mangled
- * config access itself is initiated as a SuperHyway transaction.
- */
- if (pci_is_root_bus(bus)) {
- if (dev == 0) {
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, PCI_REG(reg));
- else
- pci_write_reg(chan, *data, PCI_REG(reg));
-
- return PCIBIOS_SUCCESSFUL;
- } else if (dev > 1)
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- /* Clear errors */
- pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR);
-
- /* Set the PIO address */
- pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
- (func << 16) | reg, SH4A_PCIEPAR);
-
- /* Enable the configuration access */
- pci_write_reg(chan, (1 << 31) | (type << 8), SH4A_PCIEPCTLR);
-
- /* Check for errors */
- if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* Check for master and target aborts */
- if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, SH4A_PCIEPDR);
- else
- pci_write_reg(chan, *data, SH4A_PCIEPDR);
-
- /* Disable the configuration access */
- pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- int ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL) {
- *val = 0xffffffff;
- goto out;
- }
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- else
- *val = data;
-
- dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=0x%08lx\n", bus->number,
- devfn, where, size, (unsigned long)*val);
-
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- int shift, ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- goto out;
-
- dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=%08lx\n", bus->number,
- devfn, where, size, (unsigned long)val);
-
- if (size == 1) {
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- } else if (size == 2) {
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- } else
- data = val;
-
- ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
- devfn, where, &data);
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-struct pci_ops sh7786_pci_ops = {
- .read = sh7786_pcie_read,
- .write = sh7786_pcie_write,
-};
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
deleted file mode 100644
index 4cff2a8107bf06..00000000000000
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI support for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static struct resource gapspci_resources[] = {
- {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct pci_channel dreamcast_pci_controller = {
- .pci_ops = &gapspci_pci_ops,
- .resources = gapspci_resources,
- .nr_resources = ARRAY_SIZE(gapspci_resources),
- .io_offset = 0x00000000,
- .mem_offset = 0x00000000,
-};
-
-/*
- * gapspci init
- */
-
-static int __init gapspci_init(void)
-{
- char idbuf[16];
- int i;
-
- /*
- * FIXME: All of this wants documenting to some degree,
- * even some basic register definitions would be nice.
- *
- * I haven't seen anything this ugly since.. maple.
- */
-
- for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
-
- if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
- return -ENODEV;
-
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
- for (i=0; i<1000000; i++)
- cpu_relax();
-
- if (inl(GAPSPCI_REGS+0x18) != 1)
- return -EINVAL;
-
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
-
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
-
- /* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
- return register_pci_controller(&dreamcast_pci_controller);
-}
-arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
deleted file mode 100644
index 1543c50b65031c..00000000000000
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCI_SH4_H
-#define __PCI_SH4_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763)
-#include "pci-sh7780.h"
-#else
-#include "pci-sh7751.h"
-#endif
-
-#include <asm/io.h>
-
-#define SH4_PCICR 0x100 /* PCI Control Register */
- #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
- #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
- #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */
- #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */
- #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
- #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
- #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */
- #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */
- #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */
- #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */
- #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
-#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
-#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
-#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
-#define SH4_PCIINT 0x114 /* PCI Interrupt Register */
- #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */
- #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */
- #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */
- #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
- #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */
- #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */
- #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
- #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */
- #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
- #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
- #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
- #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
-#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
- #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
- #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
- #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
- #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
- #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
- #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
- #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
- #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
- #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
- #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
- #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
-#define SH4_PCIALR 0x11C /* Error Address Register */
-#define SH4_PCICLR 0x120 /* Error Command/Data */
- #define SH4_PCICLR_MPIO 0x80000000
- #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
- #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
- #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
- #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
- #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */
- #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
-#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
- #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
- #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
- #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
- #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
- #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
- #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */
-#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */
- #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
- #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
- #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
- #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
- #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
-#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
- #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
-#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */
-#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */
-#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */
-#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */
- #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
- #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
- #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
- #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
- #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */
- #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
- #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
- #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
- #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
- #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */
-#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */
-#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */
-#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */
-#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */
-#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */
-#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */
-#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */
-#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */
-#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */
-#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */
-#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */
-#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */
-#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
- #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
- #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
- #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
- #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
-#define SH4_PCIMBR 0x1C4 /* Memory Base Address */
- #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
- #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
-#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */
- #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
- #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
-#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
- #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
- #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
-#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
- #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
- #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
- #define SH4_PCIMBR0 SH4_PCIBCR1
-#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
- #define SH4_PCIMBMR0 SH4_PCIBCR2
-#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
-#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
-#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
- #define SH4_PCIMBR2 SH4_PCIWCR3
-#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
-#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */
-#define SH4_PCIPCTR 0x200 /* Port Control Register */
- #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
- #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
- #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
- #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
- #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
- #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
- #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
- #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
- #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
-#define SH4_PCIPDTR 0x204 /* Port Data Register */
- #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
- #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
- #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
- #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
- #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
- #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
-#define SH4_PCIPDR 0x220 /* Port IO Data Register */
-
-/* arch/sh/kernel/drivers/pci/ops-sh4.c */
-extern struct pci_ops sh4_pci_ops;
-int pci_fixup_pcic(struct pci_channel *chan);
-
-struct sh4_pci_address_space {
- unsigned long base;
- unsigned long size;
-};
-
-struct sh4_pci_address_map {
- struct sh4_pci_address_space window0;
- struct sh4_pci_address_space window1;
-};
-
-static inline void pci_write_reg(struct pci_channel *chan,
- unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long pci_read_reg(struct pci_channel *chan,
- unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
deleted file mode 100644
index 11ed21c2e9bb10..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7751
- *
- * Copyright (C) 2003 - 2009 Paul Mundt
- * Copyright (C) 2001 Dustin McIntire
- *
- * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include "pci-sh4.h"
-#include <asm/addrspace.h>
-#include <linux/sizes.h>
-
-static int __init __area_sdram_check(struct pci_channel *chan,
- unsigned int area)
-{
- unsigned long word;
-
- word = __raw_readl(SH7751_BCR1);
- /* check BCR for SDRAM in area */
- if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR1);
-
- word = __raw_readw(SH7751_BCR2);
- /* check BCR2 for 32bit SDRAM interface*/
- if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR2);
-
- return 1;
-}
-
-static struct resource sh7751_pci_resources[] = {
- {
- .name = "SH7751_IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO
- }, {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
- },
-};
-
-static struct pci_channel sh7751_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7751_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
- .mem_offset = 0x00000000,
- .io_offset = 0x00000000,
- .io_map_base = SH7751_PCI_IO_BASE,
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-};
-
-static int __init sh7751_pci_init(void)
-{
- struct pci_channel *chan = &sh7751_pci_controller;
- unsigned int id;
- u32 word, reg;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe200000;
-
- /* check for SH7751/SH7751R hardware */
- id = pci_read_reg(chan, SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- /* Set the BCR's to enable PCI access */
- reg = __raw_readl(SH7751_BCR1);
- reg |= 0x80000;
- __raw_writel(reg, SH7751_BCR1);
-
- /* Turn the clocks back on (not done in reset)*/
- pci_write_reg(chan, 0, SH4_PCICLKR);
- /* Clear Powerdown IRQ's (not done in reset) */
- word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(chan, word, SH4_PCIPINT);
-
- /* set the command/status bits to:
- * Wait Cycle Control + Parity Enable + Bus Master +
- * Mem space enable
- */
- word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
- SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(chan, word, SH7751_PCICONF1);
-
- /* define this host as the host bridge */
- word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(chan, word, SH7751_PCICONF2);
-
- /* Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
- */
- word = sh7751_pci_map.window0.size - 1;
- pci_write_reg(chan, word, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(sh7751_pci_map.window0.base);
- pci_write_reg(chan, word, SH4_PCILAR0);
- pci_write_reg(chan, word, SH7751_PCICONF5);
-
- /* Set the local 16MB PCI memory space window to
- * the lowest PCI mapped address
- */
- word = chan->resources[1].start & SH4_PCIMBR_MASK;
- pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(chan, word , SH4_PCIMBR);
-
- /* Make sure the MSB's of IO window are set to access PCI space
- * correctly */
- word = chan->resources[0].start & SH4_PCIIOBR_MASK;
- pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(chan, word, SH4_PCIIOBR);
-
- /* Set PCI WCRx, BCRx's, copy from BSC locations */
-
- /* check BCR for SDRAM in specified area */
- switch (sh7751_pci_map.window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
- }
-
- if (!word)
- return -1;
-
- /* configure the wait control registers */
- word = __raw_readl(SH7751_WCR1);
- pci_write_reg(chan, word, SH4_PCIWCR1);
- word = __raw_readl(SH7751_WCR2);
- pci_write_reg(chan, word, SH4_PCIWCR2);
- word = __raw_readl(SH7751_WCR3);
- pci_write_reg(chan, word, SH4_PCIWCR3);
- word = __raw_readl(SH7751_MCR);
- pci_write_reg(chan, word, SH4_PCIMCR);
-
- /* NOTE: I'm ignoring the PCI error IRQs for now..
- * TODO: add support for the internal error interrupts and
- * DMA interrupts...
- */
-
- pci_fixup_pcic(chan);
-
- /* SH7751 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(chan, word, SH4_PCICR);
-
- return register_pci_controller(chan);
-}
-arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
deleted file mode 100644
index d1951e50effc8b..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7751 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7751_H_
-#define _PCI_SH7751_H_
-
-/* Platform Specific Values */
-#define SH7751_VENDOR_ID 0x1054
-#define SH7751_DEVICE_ID 0x3505
-#define SH7751R_DEVICE_ID 0x350e
-
-/* SH7751 Specific Values */
-#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */
-#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
-#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */
-#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
-
-#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
-
-#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
- #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
- #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */
-#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */
- #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */
- #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */
- #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */
- #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */
- #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */
- #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */
- #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */
- #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */
- #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */
- #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */
- #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */
- #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */
- #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */
- #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */
- #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */
- #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */
- #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */
- #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */
- #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */
- #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */
- #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */
-#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */
- #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */
- #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
- #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
- #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
-#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
- #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
- #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
- #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
- #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */
- #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */
- #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */
- #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */
-#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */
- #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */
- #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */
- #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
- #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
-/* PCICONF7 - PCICONF10 are undefined */
-#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
- #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
- #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */
-/* PCICONF12 is undefined */
-#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */
- #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */
-/* PCICONF14 is undefined */
-#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */
- #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */
-#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */
- #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */
- #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */
- #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */
- #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */
- #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */
- #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */
- #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */
- #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */
-#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */
- #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */
- #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */
- #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */
- #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */
- #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
- #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
-/* SH7715 Internal PCI Registers */
-
-/* Memory Control Registers */
-#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
-#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */
-#define SH7751_BCR3 0xFF800050 /* Memory BCR3 Register */
-#define SH7751_BCR4 0xFE0A00F0 /* Memory BCR4 Register */
-#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */
-#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */
-#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */
-#define SH7751_MCR 0xFF800014 /* Memory Control Register */
-
-/* General Memory Config Addresses */
-#define SH7751_CS0_BASE_ADDR 0x0
-#define SH7751_MEM_REGION_SIZE 0x04000000
-#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-
-#endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
deleted file mode 100644
index 9a624a6ee35479..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7780
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/log2.h>
-#include "pci-sh4.h"
-#include <asm/mmu.h>
-#include <linux/sizes.h>
-
-#if defined(CONFIG_CPU_BIG_ENDIAN)
-# define PCICR_ENDIANNESS SH4_PCICR_BSWP
-#else
-# define PCICR_ENDIANNESS 0
-#endif
-
-
-static struct resource sh7785_pci_resources[] = {
- {
- .name = "PCI IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "PCI MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCI MEM 1",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /*
- * 32-bit only resources must be last.
- */
- .name = "PCI MEM 2",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
-};
-
-static struct pci_channel sh7780_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7785_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
- .io_offset = 0,
- .mem_offset = 0,
- .io_map_base = 0xfe200000,
- .serr_irq = evt2irq(0xa00),
- .err_irq = evt2irq(0xaa0),
-};
-
-struct pci_errors {
- unsigned int mask;
- const char *str;
-} pci_arbiter_errors[] = {
- { SH4_PCIAINT_MBKN, "master broken" },
- { SH4_PCIAINT_TBTO, "target bus time out" },
- { SH4_PCIAINT_MBTO, "master bus time out" },
- { SH4_PCIAINT_TABT, "target abort" },
- { SH4_PCIAINT_MABT, "master abort" },
- { SH4_PCIAINT_RDPE, "read data parity error" },
- { SH4_PCIAINT_WDPE, "write data parity error" },
-}, pci_interrupt_errors[] = {
- { SH4_PCIINT_MLCK, "master lock error" },
- { SH4_PCIINT_TABT, "target-target abort" },
- { SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable error" },
- { SH4_PCIINT_PRTY, "address parity error" },
- { SH4_PCIINT_SERR, "SERR" },
- { SH4_PCIINT_TWDP, "data parity error for target write" },
- { SH4_PCIINT_TRDP, "PERR detected for target read" },
- { SH4_PCIINT_MTABT, "target abort for master" },
- { SH4_PCIINT_MMABT, "master abort for master" },
- { SH4_PCIINT_MWPD, "master write data parity error" },
- { SH4_PCIINT_MRPD, "master read data parity error" },
-};
-
-static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
- unsigned long addr;
- unsigned int status;
- unsigned int cmd;
- int i;
-
- addr = __raw_readl(hose->reg_base + SH4_PCIALR);
-
- /*
- * Handle status errors.
- */
- status = __raw_readw(hose->reg_base + PCI_STATUS);
- if (status & (PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT)) {
- cmd = pcibios_handle_status_errors(addr, status, hose);
- if (likely(cmd))
- __raw_writew(cmd, hose->reg_base + PCI_STATUS);
- }
-
- /*
- * Handle arbiter errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIAINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
- if (status & pci_arbiter_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_arbiter_errors[i].str, addr);
- cmd |= pci_arbiter_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
-
- /*
- * Handle the remaining PCI errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
- if (status & pci_interrupt_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_interrupt_errors[i].str, addr);
- cmd |= pci_interrupt_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
-
- printk(KERN_DEBUG "PCI: system error received: ");
- pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
- pr_cont("\n");
-
- /* Deassert SERR */
- __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
-
- /* Back off the IRQ for awhile */
- disable_irq_nosync(irq);
- hose->serr_timer.expires = jiffies + HZ;
- add_timer(&hose->serr_timer);
-
- return IRQ_HANDLED;
-}
-
-static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
-{
- int ret;
-
- /* Clear out PCI arbiter IRQs */
- __raw_writel(0, hose->reg_base + SH4_PCIAINT);
-
- /* Clear all error conditions */
- __raw_writew(PCI_STATUS_DETECTED_PARITY | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_SIG_TARGET_ABORT | \
- PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
-
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
- "PCI SERR interrupt", hose);
- if (unlikely(ret)) {
- pr_err("PCI: Failed hooking SERR IRQ\n");
- return ret;
- }
-
- /*
- * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
- * down IRQ vectors are routed through the ERR IRQ vector. We
- * only request_irq() once as there is only a single masking
- * source for multiple events.
- */
- ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
- "PCI ERR interrupt", hose);
- if (unlikely(ret)) {
- free_irq(hose->serr_irq, hose);
- return ret;
- }
-
- /* Unmask all of the arbiter IRQs. */
- __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
- SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
- SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
-
- /* Unmask all of the PCI IRQs */
- __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
- SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
- SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
- SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
- SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
- SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
-
- return ret;
-}
-
-static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
-{
- free_irq(hose->err_irq, hose);
- free_irq(hose->serr_irq, hose);
-}
-
-static void __init sh7780_pci66_init(struct pci_channel *hose)
-{
- unsigned int tmp;
-
- if (!pci_is_66mhz_capable(hose, 0, 0))
- return;
-
- /* Enable register access */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-
- /* Enable 66MHz operation */
- tmp = __raw_readw(hose->reg_base + PCI_STATUS);
- tmp |= PCI_STATUS_66MHZ;
- __raw_writew(tmp, hose->reg_base + PCI_STATUS);
-
- /* Done */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-}
-
-static int __init sh7780_pci_init(void)
-{
- struct pci_channel *chan = &sh7780_pci_controller;
- phys_addr_t memphys;
- size_t memsize;
- unsigned int id;
- const char *type;
- int ret, i;
-
- pr_notice("PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe040000;
-
- /* Enable CPU access to the PCIC registers. */
- __raw_writel(PCIECR_ENBL, PCIECR);
-
- /* Reset */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- /*
- * Wait for it to come back up. The spec says to allow for up to
- * 1 second after toggling the reset pin, but in practice 100ms
- * is more than enough.
- */
- mdelay(100);
-
- id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
- if (id != PCI_VENDOR_ID_RENESAS) {
- pr_err("PCI: Unknown vendor ID 0x%04x.\n", id);
- return -ENODEV;
- }
-
- id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
- type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
- (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
- (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
- (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
- NULL;
- if (unlikely(!type)) {
- pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n",
- id);
- return -EINVAL;
- }
-
- pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n",
- type, __raw_readb(chan->reg_base + PCI_REVISION_ID));
-
- /*
- * Now throw it in to register initialization mode and
- * start the real work.
- */
- __raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- memphys = __pa(memory_start);
- memsize = roundup_pow_of_two(memory_end - memory_start);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LSR1.
- */
- if (memsize > SZ_512M) {
- __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
- __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- __raw_writel(0, chan->reg_base + SH4_PCILAR1);
- __raw_writel(0, chan->reg_base + SH4_PCILSR1);
- }
-
- /*
- * LAR0/LSR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
- __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR0);
-
- /*
- * Hook up the ERR and SERR IRQs.
- */
- ret = sh7780_pci_setup_irqs(chan);
- if (unlikely(ret))
- return ret;
-
- /*
- * Disable the cache snoop controller for non-coherent DMA.
- */
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
-
- /*
- * Setup the memory BARs
- */
- for (i = 1; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
-
- if (unlikely(res->flags & IORESOURCE_IO))
- continue;
-
- /*
- * Make sure we're in the right physical addressing mode
- * for dealing with the resource.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
- chan->nr_resources--;
- continue;
- }
-
- size = resource_size(res);
-
- /*
- * The MBMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
- chan->reg_base + SH7780_PCIMBMR(i - 1));
- __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
- }
-
- /*
- * And I/O.
- */
- __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
-
- __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
- PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
- PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
-
- /*
- * Initialization mode complete, release the control register and
- * enable round robin mode to stop device overruns/starvation.
- */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO |
- PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- ret = register_pci_controller(chan);
- if (unlikely(ret))
- goto err;
-
- sh7780_pci66_init(chan);
-
- pr_notice("PCI: Running at %dMHz.\n",
- (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ)
- ? 66 : 33);
-
- return 0;
-
-err:
- sh7780_pci_teardown_irqs(chan);
- return ret;
-}
-arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
deleted file mode 100644
index e2ac770f8e3502..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7780 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7780_H_
-#define _PCI_SH7780_H_
-
-/* SH7780 Control Registers */
-#define PCIECR 0xFE000008
-#define PCIECR_ENBL 0x01
-
-/* SH7780 Specific Values */
-#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
-
-#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
-
-/* SH7780 PCI Config Registers */
-#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
-#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
-#define SH7780_PCIAIR 0x11C /* Error Address Register */
-#define SH7780_PCICIR 0x120 /* Error Command/Data Register */
-#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */
-#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */
-#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */
-#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
-#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-
-#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8))
-#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8))
-#define SH7780_PCIIOBR 0x1F8
-#define SH7780_PCIIOBMR 0x1FC
-#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
-#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */
-#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
-#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
-
-#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
deleted file mode 100644
index a3903304f33faa..00000000000000
--- a/arch/sh/drivers/pci/pci.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * New-style PCI core.
- *
- * Copyright (c) 2004 - 2009 Paul Mundt
- * Copyright (c) 2002 M. R. Brown
- *
- * Modelled after arch/mips/pci/pci.c:
- * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-unsigned long PCIBIOS_MIN_IO = 0x0000;
-unsigned long PCIBIOS_MIN_MEM = 0;
-
-/*
- * The PCI controller list.
- */
-static struct pci_channel *hose_head, **hose_tail = &hose_head;
-
-static int pci_initialized;
-
-static void pcibios_scanbus(struct pci_channel *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct resource *res;
- resource_size_t offset;
- int i, ret;
- struct pci_host_bridge *bridge;
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- return;
-
- for (i = 0; i < hose->nr_resources; i++) {
- res = hose->resources + i;
- offset = 0;
- if (res->flags & IORESOURCE_DISABLED)
- continue;
- if (res->flags & IORESOURCE_IO)
- offset = hose->io_offset;
- else if (res->flags & IORESOURCE_MEM)
- offset = hose->mem_offset;
- pci_add_resource_offset(&resources, res, offset);
- }
-
- list_splice_init(&resources, &bridge->windows);
- bridge->dev.parent = NULL;
- bridge->sysdata = hose;
- bridge->busnr = next_busno;
- bridge->ops = hose->pci_ops;
- bridge->swizzle_irq = pci_common_swizzle;
- bridge->map_irq = pcibios_map_platform_irq;
-
- ret = pci_scan_root_bus_bridge(bridge);
- if (ret) {
- pci_free_host_bridge(bridge);
- return;
- }
-
- hose->bus = bridge->bus;
-
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
-
- next_busno = hose->bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- pci_bus_size_bridges(hose->bus);
- pci_bus_assign_resources(hose->bus);
- pci_bus_add_devices(hose->bus);
-}
-
-/*
- * This interrupt-safe spinlock protects all accesses to PCI
- * configuration space.
- */
-DEFINE_RAW_SPINLOCK(pci_config_lock);
-static DEFINE_MUTEX(pci_scan_mutex);
-
-int register_pci_controller(struct pci_channel *hose)
-{
- int i;
-
- for (i = 0; i < hose->nr_resources; i++) {
- struct resource *res = hose->resources + i;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- if (res->flags & IORESOURCE_IO) {
- if (request_resource(&ioport_resource, res) < 0)
- goto out;
- } else {
- if (request_resource(&iomem_resource, res) < 0)
- goto out;
- }
- }
-
- *hose_tail = hose;
- hose_tail = &hose->next;
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- pr_warn("registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Setup the ERR/PERR and SERR timers, if available.
- */
- pcibios_enable_timers(hose);
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return 0;
-
-out:
- for (--i; i >= 0; i--)
- release_resource(&hose->resources[i]);
-
- pr_warn("Skipping PCI bus scan due to resource conflict\n");
- return -1;
-}
-
-static int __init pcibios_init(void)
-{
- struct pci_channel *hose;
-
- /* Scan all of the recorded PCI controllers. */
- for (hose = hose_head; hose; hose = hose->next)
- pcibios_scanbus(hose);
-
- pci_initialized = 1;
-
- return 0;
-}
-subsys_initcall(pcibios_init);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_channel *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
- start = PCIBIOS_MIN_IO + hose->resources[0].start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400.
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- }
-
- return start;
-}
-
-static void __init
-pcibios_bus_report_status_early(struct pci_channel *hose,
- int top_bus, int current_bus,
- unsigned int status_mask, int warn)
-{
- unsigned int pci_devfn;
- u16 status;
- int ret;
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- ret = early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &status);
- if (ret != PCIBIOS_SUCCESSFUL)
- continue;
- if (status == 0xffff)
- continue;
-
- early_write_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS,
- status & status_mask);
- if (warn)
- pr_cont("(%02x:%02x: %04X) ", current_bus, pci_devfn,
- status);
- }
-}
-
-/*
- * We can't use pci_find_device() here since we are
- * called from interrupt context.
- */
-static void __ref
-pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
- int warn)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 status;
-
- /*
- * ignore host bridge - we handle
- * that separately
- */
- if (dev->bus->number == 0 && dev->devfn == 0)
- continue;
-
- pci_read_config_word(dev, PCI_STATUS, &status);
- if (status == 0xffff)
- continue;
-
- if ((status & status_mask) == 0)
- continue;
-
- /* clear the status errors */
- pci_write_config_word(dev, PCI_STATUS, status & status_mask);
-
- if (warn)
- pr_cont("(%s: %04X) ", pci_name(dev), status);
- }
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- if (dev->subordinate)
- pcibios_bus_report_status(dev->subordinate, status_mask, warn);
-}
-
-void __ref pcibios_report_status(unsigned int status_mask, int warn)
-{
- struct pci_channel *hose;
-
- for (hose = hose_head; hose; hose = hose->next) {
- if (unlikely(!hose->bus))
- pcibios_bus_report_status_early(hose, hose_head->index,
- hose->index, status_mask, warn);
- else
- pcibios_bus_report_status(hose->bus, status_mask, warn);
- }
-}
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *__pci_ioport_map(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
-{
- struct pci_channel *chan = dev->sysdata;
-
- if (unlikely(!chan->io_map_base)) {
- chan->io_map_base = sh_io_port_base;
-
- if (pci_domains_supported)
- panic("To avoid data corruption io_map_base MUST be "
- "set with multiple PCI domains.");
- }
-
- return (void __iomem *)(chan->io_map_base + port);
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
- iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
deleted file mode 100644
index b0c2a5238d0497..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ /dev/null
@@ -1,609 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Express Support for the SH7786
- *
- * Copyright (C) 2009 - 2011 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/async.h>
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/sh_intc.h>
-#include <cpu/sh7786.h>
-#include "pcie-sh7786.h"
-#include <linux/sizes.h>
-
-struct sh7786_pcie_port {
- struct pci_channel *hose;
- struct clk *fclk, phy_clk;
- unsigned int index;
- int endpoint;
- int link;
-};
-
-static struct sh7786_pcie_port *sh7786_pcie_ports;
-static unsigned int nr_ports;
-static unsigned long dma_pfn_offset;
-size_t memsize;
-u64 memstart;
-
-static struct sh7786_pcie_hwops {
- int (*core_init)(void);
- async_func_t port_init_hw;
-} *sh7786_pcie_hwops;
-
-static struct resource sh7786_pci0_resources[] = {
- {
- .name = "PCIe0 MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 MEM 1",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe0 MEM 2",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 IO",
- .start = 0xfe100000,
- .end = 0xfe100000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci1_resources[] = {
- {
- .name = "PCIe1 MEM 0",
- .start = 0xfd800000,
- .end = 0xfd800000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe1 MEM 1",
- .start = 0xa0000000,
- .end = 0xa0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 MEM 2",
- .start = 0x30000000,
- .end = 0x30000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 IO",
- .start = 0xfe300000,
- .end = 0xfe300000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci2_resources[] = {
- {
- .name = "PCIe2 MEM 0",
- .start = 0xfc800000,
- .end = 0xfc800000 + SZ_4M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe2 MEM 1",
- .start = 0x80000000,
- .end = 0x80000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 MEM 2",
- .start = 0x20000000,
- .end = 0x20000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 IO",
- .start = 0xfcd00000,
- .end = 0xfcd00000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-extern struct pci_ops sh7786_pci_ops;
-
-#define DEFINE_CONTROLLER(start, idx) \
-{ \
- .pci_ops = &sh7786_pci_ops, \
- .resources = sh7786_pci##idx##_resources, \
- .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
- .reg_base = start, \
- .mem_offset = 0, \
- .io_offset = 0, \
-}
-
-static struct pci_channel sh7786_pci_channels[] = {
- DEFINE_CONTROLLER(0xfe000000, 0),
- DEFINE_CONTROLLER(0xfe200000, 1),
- DEFINE_CONTROLLER(0xfcc00000, 2),
-};
-
-static struct clk fixed_pciexclkp = {
- .rate = 100000000, /* 100 MHz reference clock */
-};
-
-static void sh7786_pci_fixup(struct pci_dev *dev)
-{
- /*
- * Prevent enumeration of root complex resources.
- */
- if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
- int i;
-
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
- sh7786_pci_fixup);
-
-static int __init phy_wait_for_ack(struct pci_channel *chan)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
- unsigned int lane, unsigned int data)
-{
- unsigned long phyaddr;
-
- phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
- ((addr & 0xff) << BITS_ADR);
-
- /* Set write data */
- pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-
- /* Clear command */
- pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-}
-
-static int __init pcie_clk_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- struct clk *clk;
- char fclk_name[16];
- int ret;
-
- /*
- * First register the fixed clock
- */
- ret = clk_register(&fixed_pciexclkp);
- if (unlikely(ret != 0))
- return ret;
-
- /*
- * Grab the port's function clock, which the PHY clock depends
- * on. clock lookups don't help us much at this point, since no
- * dev_id is available this early. Lame.
- */
- snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
-
- port->fclk = clk_get(NULL, fclk_name);
- if (IS_ERR(port->fclk)) {
- ret = PTR_ERR(port->fclk);
- goto err_fclk;
- }
-
- clk_enable(port->fclk);
-
- /*
- * And now, set up the PHY clock
- */
- clk = &port->phy_clk;
-
- memset(clk, 0, sizeof(struct clk));
-
- clk->parent = &fixed_pciexclkp;
- clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
- clk->enable_bit = BITS_CKE;
-
- ret = sh_clk_mstp_register(clk, 1);
- if (unlikely(ret < 0))
- goto err_phy;
-
- return 0;
-
-err_phy:
- clk_disable(port->fclk);
- clk_put(port->fclk);
-err_fclk:
- clk_unregister(&fixed_pciexclkp);
-
- return ret;
-}
-
-static int __init phy_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int timeout = 100;
-
- clk_enable(&port->phy_clk);
-
- /* Initialize the phy */
- phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
- phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
- phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
- phy_write_reg(chan, 0x65, 0xf, 0x09070907);
- phy_write_reg(chan, 0x66, 0xf, 0x00000010);
- phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
- phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
- phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
-
- /* Deassert Standby */
- phy_write_reg(chan, 0x67, 0x1, 0x00000400);
-
- /* Disable clock */
- clk_disable(&port->phy_clk);
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYSR))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init pcie_reset(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
-
- pci_write_reg(chan, 1, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETCTLR);
- pci_write_reg(chan, 0, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
-}
-
-static int __init pcie_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int data;
- phys_addr_t memstart, memend;
- int ret, i, win;
-
- /* Begin initialization */
- pcie_reset(port);
-
- /*
- * Initial header for port config space is type 1, set the device
- * class to match. Hardware takes care of propagating the IDSETR
- * settings, so there is no need to bother with a quirk.
- */
- pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI_NORMAL << 8, SH4A_PCIEIDSETR1);
-
- /* Initialize default capabilities. */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
- data &= ~(PCI_EXP_FLAGS_TYPE << 16);
-
- if (port->endpoint)
- data |= PCI_EXP_TYPE_ENDPOINT << 20;
- else
- data |= PCI_EXP_TYPE_ROOT_PORT << 20;
-
- data |= PCI_CAP_ID_EXP;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
-
- /* Enable data link layer active state reporting */
- pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
-
- /* Enable extended sync and ASPM L0s support */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
- data &= ~PCI_EXP_LNKCTL_ASPMC;
- data |= PCI_EXP_LNKCTL_ES | 1;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
-
- /* Write out the physical slot number */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
- data &= ~PCI_EXP_SLTCAP_PSN;
- data |= (port->index + 1) << 19;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
-
- /* Set the completion timer timeout to the maximum 32ms. */
- data = pci_read_reg(chan, SH4A_PCIETLCTLR);
- data &= ~0x3f00;
- data |= 0x32 << 8;
- pci_write_reg(chan, data, SH4A_PCIETLCTLR);
-
- /*
- * Set fast training sequences to the maximum 255,
- * and enable MAC data scrambling.
- */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data &= ~PCIEMACCTLR_SCR_DIS;
- data |= (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- memstart = __pa(memory_start);
- memend = __pa(memory_end);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * The start address must be aligned on its size. So we round
- * it down, and then recalculate the size so that it covers
- * the entire memory.
- */
- memstart = ALIGN_DOWN(memstart, memsize);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LAMR1.
- */
- if (memsize > SZ_512M) {
- pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1);
- pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
- SH4A_PCIELAMR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- pci_write_reg(chan, 0, SH4A_PCIELAR1);
- pci_write_reg(chan, 0, SH4A_PCIELAMR1);
- }
-
- /*
- * LAR0/LAMR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- pci_write_reg(chan, memstart, SH4A_PCIELAR0);
- pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
-
- /* Finish initialization */
- data = pci_read_reg(chan, SH4A_PCIETCTLR);
- data |= 0x1;
- pci_write_reg(chan, data, SH4A_PCIETCTLR);
-
- /* Let things settle down a bit.. */
- mdelay(100);
-
- /* Enable DL_Active Interrupt generation */
- data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
- data |= PCIEDLINTENR_DLL_ACT_ENABLE;
- pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
-
- /* Disable MAC data scrambling. */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- /*
- * This will timeout if we don't have a link, but we permit the
- * port to register anyways in order to support hotplug on future
- * hardware.
- */
- ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
-
- data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
- data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
- data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
- pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
-
- pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
- pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
-
- wmb();
-
- if (ret == 0) {
- data = pci_read_reg(chan, SH4A_PCIEMACSR);
- printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
- port->index, (data >> 20) & 0x3f);
- } else
- printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
- port->index);
-
- for (i = win = 0; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
- u32 mask;
-
- /*
- * We can't use the 32-bit mode windows in legacy 29-bit
- * mode, so just skip them entirely.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
- res->flags |= IORESOURCE_DISABLED;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
-
- /*
- * The PAMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- size = resource_size(res);
- mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
- pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
-
- pci_write_reg(chan, upper_32_bits(res->start),
- SH4A_PCIEPARH(win));
- pci_write_reg(chan, lower_32_bits(res->start),
- SH4A_PCIEPARL(win));
-
- mask = MASK_PARE;
- if (res->flags & IORESOURCE_IO)
- mask |= MASK_SPC;
-
- pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
-
- win++;
- }
-
- return 0;
-}
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xae0);
-}
-
-void pcibios_bus_add_device(struct pci_dev *pdev)
-{
- dma_direct_set_offset(&pdev->dev, __pa(memory_start),
- __pa(memory_start) - memstart, memsize);
-}
-
-static int __init sh7786_pcie_core_init(void)
-{
- /* Return the number of ports */
- return test_mode_pin(MODE_PIN12) ? 3 : 2;
-}
-
-static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie)
-{
- struct sh7786_pcie_port *port = data;
- int ret;
-
- /*
- * Check if we are configured in endpoint or root complex mode,
- * this is a fixed pin setting that applies to all PCIe ports.
- */
- port->endpoint = test_mode_pin(MODE_PIN11);
-
- /*
- * Setup clocks, needed both for PHY and PCIe registers.
- */
- ret = pcie_clk_init(port);
- if (unlikely(ret < 0)) {
- pr_err("clock initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = phy_init(port);
- if (unlikely(ret < 0)) {
- pr_err("phy initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = pcie_init(port);
- if (unlikely(ret < 0)) {
- pr_err("core initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- /* In the interest of preserving device ordering, synchronize */
- async_synchronize_cookie(cookie);
-
- register_pci_controller(port->hose);
-}
-
-static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
- .core_init = sh7786_pcie_core_init,
- .port_init_hw = sh7786_pcie_init_hw,
-};
-
-static int __init sh7786_pcie_init(void)
-{
- struct clk *platclk;
- u32 mm_sel;
- int i;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
-
- nr_ports = sh7786_pcie_hwops->core_init();
- BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
-
- if (unlikely(nr_ports == 0))
- return -ENODEV;
-
- sh7786_pcie_ports = kcalloc(nr_ports, sizeof(struct sh7786_pcie_port),
- GFP_KERNEL);
- if (unlikely(!sh7786_pcie_ports))
- return -ENOMEM;
-
- /*
- * Fetch any optional platform clock associated with this block.
- *
- * This is a rather nasty hack for boards with spec-mocking FPGAs
- * that have a secondary set of clocks outside of the on-chip
- * ones that need to be accounted for before there is any chance
- * of touching the existing MSTP bits or CPG clocks.
- */
- platclk = clk_get(NULL, "pcie_plat_clk");
- if (IS_ERR(platclk)) {
- /* Sane hardware should probably get a WARN_ON.. */
- platclk = NULL;
- }
-
- clk_enable(platclk);
-
- mm_sel = sh7786_mm_sel();
-
- /*
- * Depending on the MMSELR register value, the PCIe0 MEM 1
- * area may not be available. See Table 13.11 of the SH7786
- * datasheet.
- */
- if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6)
- sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED;
-
- printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
-
- for (i = 0; i < nr_ports; i++) {
- struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
-
- port->index = i;
- port->hose = sh7786_pci_channels + i;
- port->hose->io_map_base = port->hose->resources[0].start;
-
- async_schedule(sh7786_pcie_hwops->port_init_hw, port);
- }
-
- async_synchronize_full();
-
- return 0;
-}
-arch_initcall(sh7786_pcie_init);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
deleted file mode 100644
index ffe383681a0bd2..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ /dev/null
@@ -1,577 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 PCI-Express controller definitions.
- *
- * Copyright (C) 2008, 2009 Renesas Technology Corp.
- * All rights reserved.
- */
-#ifndef __PCI_SH7786_H
-#define __PCI_SH7786_H
-
-/* PCIe bus-0(x4) on SH7786 */ // Rev1.171
-#define SH4A_PCIE_SPW_BASE 0xFE000000 /* spw config address for controller 0 */
-#define SH4A_PCIE_SPW_BASE1 0xFE200000 /* spw config address for controller 1 (Rev1.14)*/
-#define SH4A_PCIE_SPW_BASE2 0xFCC00000 /* spw config address for controller 2 (Rev1.171)*/
-#define SH4A_PCIE_SPW_BASE_LEN 0x00080000
-
-#define SH4A_PCI_CNFG_BASE 0xFE040000 /* pci config address for controller 0 */
-#define SH4A_PCI_CNFG_BASE1 0xFE240000 /* pci config address for controller 1 (Rev1.14)*/
-#define SH4A_PCI_CNFG_BASE2 0xFCC40000 /* pci config address for controller 2 (Rev1.171)*/
-#define SH4A_PCI_CNFG_BASE_LEN 0x00040000
-
-#define SH4A_PCIPIO_ADDR_OFFSET 0x000001c0 /* offset to pci config_address */
-#define SH4A_PCIPIO_DATA_OFFSET 0x00000220 /* offset to pci config_data */
-
-/*
- * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
- * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
- */
-
-/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
-#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
-
-/* SPVCR0 */
-#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
-#define BITS_TOP_MB (24)
-#define MASK_TOP_MB (0xff<<BITS_TOP_MB)
-#define BITS_BOT_MB (16)
-#define MASK_BOT_MB (0xff<<BITS_BOT_MB)
-#define BITS_VC_ID (0)
-#define MASK_VC_ID (0xffff<<BITS_VC_ID)
-
-/* SPVCR1 */
-#define SH4A_PCIEVCR1 (0x000004) /* R - 0x0000 0000 32*/
-#define BITS_BADOPC (5) /* 5 BADOPC 0 R/W */
-#define MASK_BADOPC (1<<BITS_BADOPC)
-#define BITS_BADDEST (4) /*4 BADDEST 0 R/W */
-#define MASK_BADDEST (1<<BITS_BADDEST)
-#define BITS_UNSOLRESP (3) /* 3 UNSOLRESP 0 R/W */
-#define MASK_UNSOLRESP (1<<BITS_UNSOLRESP)
-#define BITS_ERRSNT (1) /* 1 ERRSNT 0 */
-#define MASK_ERRSNT (1<<BITS_ERRSNT)
-#define BITS_ERRRCV (0) /* 0 ERRRCV 0 */
-#define MASK_ERRRCV (1<<BITS_ERRRCV)
-
-/* PCIEENBLR */
-#define SH4A_PCIEENBLR (0x000008) /* R/W - 0x0000 0001 32 */
-
-/* PCIEECR */
-#define SH4A_PCIEECR (0x00000C) /* R/W - 0x0000 0000 32 */
-#define BITS_ENBL (0) /* 0 ENBL 0 R/W */
-#define MASK_ENBL (1<<BITS_ENBL)
-
-/* PCIEPAR */
-#define SH4A_PCIEPAR (0x000010) /* R/W - 0x0000 0000 32 */
-#define BITS_BN (24)
-#define MASK_BN (0xff<<BITS_BN)
-#define BITS_DN (19)
-#define MASK_DN (0x1f<<BITS_DN)
-#define BITS_FN (16)
-#define MASK_FN (0x7<<BITS_FN)
-#define BITS_EREGNO (8)
-#define MASK_EREGNO (0xff<<BITS_EREGNO)
-#define BITS_REGNO (2)
-#define MASK_REGNO (0x3f<<BITS_REGNO)
-
-/* PCIEPCTLR */
-#define SH4A_PCIEPCTLR (0x000018) /* R/W - 0x0000 0000 32 */
-#define BITS_CCIE (31) /* 31 CCIE */
-#define MASK_CCIE (1<<BITS_CCIE)
-#define BITS_TYPE (8)
-#define MASK_TYPE (1<<BITS_TYPE)
-#define BITS_C_VC (0)
-#define MASK_C_VC (1<<BITS_C_VC)
-
-/* PCIEPDR */
-#define SH4A_PCIEPDR (0x000020) /* R/W - 0x0000 0000 32 */
-#define BITS_PDR (0)
-#define MASK_PDR (0xffffffff<<BITS_PDR)
-
-/* PCIEMSGALR */
-#define SH4A_PCIEMSGALR (0x000030) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRL (0)
-#define MASK_MSGADRL (0xffffffff<<BITS_MSGADRL)
-
-/* PCIEMSGAHR */
-#define SH4A_PCIEMSGAHR (0x000034) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRH (0)
-#define MASK_MSGADRH (0xffffffff<<BITS_MSGADRH)
-
-/* PCIEMSGCTLR */
-#define SH4A_PCIEMSGCTLR (0x000038) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGIE (31)
-#define MASK_MSGIE (1<<BITS_MSGIE)
-#define BITS_MROUTE (16)
-#define MASK_MROUTE (0x7<<BITS_MROUTE)
-#define BITS_MCODE (8)
-#define MASK_MCODE (0xff<<BITS_MCODE)
-#define BITS_M_VC (0)
-#define MASK_M_VC (1<<BITS_M_VC)
-
-/* PCIEMSG */
-#define SH4A_PCIEMSG (0x000040) /* W - - 32 */
-#define BITS_MDATA (0)
-#define MASK_MDATA (0xffffffff<<BITS_MDATA)
-
-/* PCIEUNLOCKCR */
-#define SH4A_PCIEUNLOCKCR (0x000048) /* R/W - 0x0000 0000 32 */
-
-/* PCIEIDR */
-#define SH4A_PCIEIDR (0x000060) /* R/W - 0x0101 1101 32 */
-
-/* PCIEDBGCTLR */
-#define SH4A_PCIEDBGCTLR (0x000100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEINTXR */
-#define SH4A_PCIEINTXR (0x004000) /* R/W - 0x0000 0000 32 */
-
-/* PCIERMSGR */
-#define SH4A_PCIERMSGR (0x004010) /* R/W - 0x0000 0000 32 */
-
-/* PCIERSTR */
-#define SH4A_PCIERSTR(x) (0x008000 + ((x) * 0x4)) /* R/W - 0x0000 0000 32 */
-
-/* PCIESRSTR */
-#define SH4A_PCIESRSTR (0x008040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYCTLR */
-#define SH4A_PCIEPHYCTLR (0x010000) /* R/W - 0x0000 0000 32 */
-#define BITS_CKE (0)
-#define MASK_CKE (1<<BITS_CKE)
-
-/* PCIERMSGIER */
-#define SH4A_PCIERMSGIER (0x004040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYADRR */
-#define SH4A_PCIEPHYADRR (0x010004) /* R/W - 0x0000 0000 32 */
-#define BITS_ACK (24) // Rev1.171
-#define MASK_ACK (1<<BITS_ACK) // Rev1.171
-#define BITS_CMD (16) // Rev1.171
-#define MASK_CMD (0x03<<BITS_CMD) // Rev1.171
-#define BITS_LANE (8)
-#define MASK_LANE (0x0f<<BITS_LANE)
-#define BITS_ADR (0)
-#define MASK_ADR (0xff<<BITS_ADR)
-
-/* PCIEPHYDINR */ // Rev1.171 start.
-#define SH4A_PCIEPHYDINR (0x010008) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYDOUTR */
-#define SH4A_PCIEPHYDOUTR (0x01000C) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYSR */
-#define SH4A_PCIEPHYSR (0x010010) /* R/W - 0x0000 0000 32 */ // Rev1.171 end.
-
-/* PCIEPHYDATAR */
-#define SH4A_PCIEPHYDATAR (0x00008) /* R/W - 0xxxxx xxxx 32 */
-#define BITS_DATA (0)
-#define MASK_DATA (0xffffffff<<BITS_DATA)
-
-/* PCIETCTLR */
-#define SH4A_PCIETCTLR (0x020000) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CFINT (0)
-#define MASK_CFINT (1<<BITS_CFINT)
-
-/* PCIETSTR */
-#define SH4A_PCIETSTR (0x020004) /* R 0x0000 0000 32 */
-
-/* PCIEINTR */
-#define SH4A_PCIEINTR (0x020008) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEINTER */
-#define SH4A_PCIEINTER (0x02000C) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEEH0R */
-#define SH4A_PCIEEHR(x) (0x020010 + ((x) * 0x4)) /* R - 0x0000 0000 32 */
-
-/* PCIEAIR */
-#define SH4A_PCIEAIR (SH4A_PCIE_BASE + 0x020010) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIECIR */
-#define SH4A_PCIECIR (SH4A_PCIE_BASE) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIEERRFR */ // Rev1.18
-#define SH4A_PCIEERRFR (0x020020) /* R/W R/W 0xxxxx xxxx 32 */ // Rev1.18
-
-/* PCIEERRFER */
-#define SH4A_PCIEERRFER (0x020024) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEERRFR2 */
-#define SH4A_PCIEERRFR2 (0x020028) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEMSIR */
-#define SH4A_PCIEMSIR (0x020040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEMSIFR */
-#define SH4A_PCIEMSIFR (0x020044) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPWRCTLR */
-#define SH4A_PCIEPWRCTLR (0x020100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPCCTLR */
-#define SH4A_PCIEPCCTLR (0x020180) /* R/W - 0x0000 0000 32 */
-
- // Rev1.18
-/* PCIELAR0 */
-#define SH4A_PCIELAR0 (0x020200) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LARn (20)
-#define MASK_LARn (0xfff<<BITS_LARn)
-
-#define SH4A_PCIE_020204 (0x020204) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIELAMR0 */
-#define SH4A_PCIELAMR0 (0x020208) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LAMRn (20)
-#define MASK_LAMRn (0x1ff<<BITS_LAMRn)
-#define BITS_LAREn (0)
-#define MASK_LAREn (0x1<<BITS_LAREn)
-
-/* PCIECSCR0 */
-#define SH4A_PCIECSCR0 (0x020210) /* R/W R/W 0x0000 0000 32 */
-#define BITS_RANGE (2)
-#define MASK_RANGE (0x7<<BITS_RANGE)
-#define BITS_SNPMD (0)
-#define MASK_SNPMD (0x3<<BITS_SNPMD)
-
-/* PCIECSAR0 */
-#define SH4A_PCIECSAR0 (0x020214) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CSADR (0)
-#define MASK_CSADR (0xffffffff<<BITS_CSADR)
-
-/* PCIESTCTLR0 */
-#define SH4A_PCIESTCTLR0 (0x020218) /* R/W R/W 0x0000 0000 32 */
-#define BITS_SHPRI (8)
-#define MASK_SHPRI (0x0f<<BITS_SHPRI)
-
-#define SH4A_PCIE_020224 (0x020224) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR1 (0x020220) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR1 (0x020228) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR1 (0x020230) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR1 (0x020234) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR1 (0x020238) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR2 (0x020240) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020244 (0x020244) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR2 (0x020248) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR2 (0x020250) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR2 (0x020254) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR2 (0x020258) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR3 (0x020260) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020264 (0x020264) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR3 (0x020268) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR3 (0x020270) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR3 (0x020274) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR3 (0x020278) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR4 (0x020280) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020284 (0x020284) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR4 (0x020288) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR4 (0x020290) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR4 (0x020294) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR4 (0x020298) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR5 (0x0202A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_0202A4 (0x0202A4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR5 (0x0202A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR5 (0x0202B0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPARL */
-#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAL (18)
-#define MASK_PAL (0x3fff<<BITS_PAL)
-
-/* PCIEPARH */
-#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAH (0)
-#define MASK_PAH (0xffffffff<<BITS_PAH)
-
-/* PCIEPAMR */
-#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAM (18)
-#define MASK_PAM (0x3fff<<BITS_PAM)
-
-/* PCIEPTCTLR */
-#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20))
-#define BITS_PARE (31)
-#define MASK_PARE (0x1<<BITS_PARE)
-#define BITS_TC (20)
-#define MASK_TC (0x7<<BITS_TC)
-#define BITS_T_VC (16)
-#define MASK_T_VC (0x1<<BITS_T_VC)
-#define BITS_LOCK (12)
-#define MASK_LOCK (0x1<<BITS_LOCK)
-#define BITS_SPC (8)
-#define MASK_SPC (0x1<<BITS_SPC)
-
-#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR0 (0x021108) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR0 (0x02110C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR0 (0x021110) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR0 (0x021114) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR0 (0x021118) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR0 (0x02111C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR0 (0x021120) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R0 (0x021124) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR0 (0x021128) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR0 (0x02112C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR1 (0x021140) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR1 (0x021144) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR1 (0x021148) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR1 (0x02114C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR1 (0x021150) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR1 (0x021154) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR1 (0x021158) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR1 (0x02115C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR1 (0x021160) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R1 (0x021164) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR1 (0x021168) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR1 (0x02116C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR2 (0x021180) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR2 (0x021184) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR2 (0x021188) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR2 (0x02118C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR2 (0x021190) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR2 (0x021194) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR2 (0x021198) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR2 (0x02119C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR2 (0x0211A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R2 (0x0211A4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR2 (0x0211A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR3 (0x0211C0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR3 (0x0211C4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR3 (0x0211C8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR3 (0x0211CC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR3 (0x0211D0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR3 (0x0211D4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR3 (0x0211D8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR3 (0x0211DC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR3 (0x0211E0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R3 (0x0211E4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR3 (0x0211E8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR3 (0x0211EC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPCICONF0 (0x040000) /* R R - 8/16/32 */
-#define SH4A_PCIEPCICONF1 (0x040004) /* R/W R/W 0x0008 0000 8/16/32 */
-#define SH4A_PCIEPCICONF2 (0x040008) /* R/W R/W 0xFF00 0000 8/16/32 */
-#define SH4A_PCIEPCICONF3 (0x04000C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF4 (0x040010) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF5 (0x040014) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF6 (0x040018) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF7 (0x04001C) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF8 (0x040020) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF9 (0x040024) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF10 (0x040028) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF11 (0x04002C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF12 (0x040030) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF13 (0x040034) /* R/W R/W 0x0000 0040 8/16/32 */
-#define SH4A_PCIEPCICONF14 (0x040038) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF15 (0x04003C) /* R/W R/W 0x0000 00FF 8/16/32 */
-#define SH4A_PCIEPMCAP0 (0x040040) /* R/W R 0x0003 5001 8/16/32 */
-#define SH4A_PCIEPMCAP1 (0x040044) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP0 (0x040050) /* R/W R/W 0x0180 7005 8/16/32 */
-#define SH4A_PCIEMSICAP1 (0x040054) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP2 (0x040058) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP3 (0x04005C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP4 (0x040060) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP5 (0x040064) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP0 (0x040070) /* R/W R/W 0x0001 0010 8/16/32 */
-#define SH4A_PCIEEXPCAP1 (0x040074) /* R/W R 0x0000 0005 8/16/32 */
-#define SH4A_PCIEEXPCAP2 (0x040078) /* R/W R/W 0x0000 0801 8/16/32 */
-#define SH4A_PCIEEXPCAP3 (0x04007C) /* R/W R 0x0003 F421 8/16/32 */
-#define SH4A_PCIEEXPCAP4 (0x040080) /* R/W R/W 0x0041 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP5 (0x040084) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP6 (0x040088) /* R/W R/W 0x0000 03C0 8/16/32 */
-#define SH4A_PCIEEXPCAP7 (0x04008C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP8 (0x040090) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP0 (0x040100) /* R/W R 0x1B01 0002 8/16/32 */
-#define SH4A_PCIEVCCAP1 (0x040104) /* R R 0x0000 0001 8/16/32 */
-#define SH4A_PCIEVCCAP2 (0x040108) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP3 (0x04010C) /* R R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP4 (0x040110) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP5 (0x040114) /* R/W R/W 0x8000 00FF 8/16/32 */
-#define SH4A_PCIEVCCAP6 (0x040118) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIEVCCAP7 (0x04011C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP8 (0x040120) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP9 (0x040124) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIENUMCAP0 (0x0001B0) /* RW R 0x0001 0003 8/16/32 */
-#define SH4A_PCIENUMCAP1 (0x0001B4) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIENUMCAP2 (0x0001B8) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEIDSETR0 (0x041000) /* R/W R 0x0000 FFFF 16/32 */
-#define SH4A_PCIEIDSETR1 (0x041004) /* R/W R 0xFF00 0000 16/32 */
-#define SH4A_PCIEBAR0SETR (0x041008) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR1SETR (0x04100C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR2SETR (0x041010) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR3SETR (0x041014) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR4SETR (0x041018) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR5SETR (0x04101C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECISSETR (0x041020) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEIDSETR2 (0x041024) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEEROMSETR (0x041028) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR0 (0x04102C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR1 (0x041030) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECTLR (0x041040) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLSR (0x041044) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIETLCTLR (0x041048) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLSR (0x04104C) /* R/W1C R 0x4003 0000 16/32 */
-#define SH4A_PCIEDLCTLR (0x041050) /* R R 0x0000 0000 16/32 */
-#define SH4A_PCIEMACSR (0x041054) /* R/W1C R 0x0041 0000 16/32 */
-#define SH4A_PCIEMACCTLR (0x041058) /* R/W R 0x0000 0000 16/32 */
-#define PCIEMACCTLR_SCR_DIS (1 << 27) /* scramble disable */
-#define SH4A_PCIEPMSTR (0x04105C) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMCTLR (0x041060) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLINTENR (0x041064) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLINTENR (0x041068) /* R/W R 0x0000 0000 16/32 */
-#define PCIEDLINTENR_DLL_ACT_ENABLE (1 << 31) /* DL active irq */
-#define SH4A_PCIEMACINTENR (0x04106C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMINTENR (0x041070) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETXDCTLR (0x044000) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXCTLR (0x044020) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXSR (0x044028) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0DCTLR (0x044100) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0SR (0x044108) /* R/W - H'00888000_00000000 32/64 */
-#define SH4A_PCIEVC0PDTXR (0x044110) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHTXR (0x044118) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDTXR (0x044120) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHTXR (0x044128) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDTXR (0x044130) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHTXR (0x044138) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXDCTLR (0x044200) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXSR (0x044208) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDTXR (0x044210) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHTXR (0x044218) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDTXR (0x044220) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHTXR (0x044228) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDTXR (0x044230) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHTXR (0x044238) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIERDCTLR (0x046000) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPCTLR (0x046008) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPHR (0x046010) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPERR (0x046018) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0DCTLR (0x046100) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0SR (0x046108) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PDRXR (0x046140) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHRXR (0x046148) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PERR (0x046150) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDRXR (0x046158) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHRXR (0x046160) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPERR (0x046168) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDRXR (0x046170) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHRXR (0x046178) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CERR (0x046180) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXDCTLR (0x046200) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXSR (0x046208) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDRXR (0x046240) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHRXR (0x046248) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPERR (0x046250) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDRXR (0x046258) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHRXR (0x046260) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPERR (0x046268) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDRXR (0x046270) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHRXR (0x046278) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCERR (0x046280) /* R H'00000000_00000000 32/64 */
-
-/* SSI Register Definition for MSI WORK AROUND --hamada */
-#define SH4A_PCI_SSI_BASE 0xFFE00000 /* spw config address */
-#define SH4A_PCI_SSI_BASE_LEN 0x00100000 /* 1MB */
-
-#define SH4A_SSICR0 (0x000000)
-#define SH4A_SSICR1 (0x010000)
-#define SH4A_SSICR2 (0x020000)
-#define SH4A_SSICR3 (0x030000)
-
-#define PCI_REG(x) ((x) + 0x40000)
-
-static inline void
-pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long
-pci_read_reg(struct pci_channel *chan, unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH7786_H */
diff --git a/arch/sh/drivers/platform_early.c b/arch/sh/drivers/platform_early.c
deleted file mode 100644
index 143747c45206fe..00000000000000
--- a/arch/sh/drivers/platform_early.c
+++ /dev/null
@@ -1,340 +0,0 @@
-// SPDX--License-Identifier: GPL-2.0
-
-#include <asm/platform_early.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pm.h>
-
-static __initdata LIST_HEAD(sh_early_platform_driver_list);
-static __initdata LIST_HEAD(sh_early_platform_device_list);
-
-static const struct platform_device_id *
-platform_match_id(const struct platform_device_id *id,
- struct platform_device *pdev)
-{
- while (id->name[0]) {
- if (strcmp(pdev->name, id->name) == 0) {
- pdev->id_entry = id;
- return id;
- }
- id++;
- }
- return NULL;
-}
-
-static int platform_match(struct device *dev, struct device_driver *drv)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct platform_driver *pdrv = to_platform_driver(drv);
-
- /* When driver_override is set, only bind to the matching driver */
- if (pdev->driver_override)
- return !strcmp(pdev->driver_override, drv->name);
-
- /* Then try to match against the id table */
- if (pdrv->id_table)
- return platform_match_id(pdrv->id_table, pdev) != NULL;
-
- /* fall-back to driver name match */
- return (strcmp(pdev->name, drv->name) == 0);
-}
-
-#ifdef CONFIG_PM
-static void device_pm_init_common(struct device *dev)
-{
- if (!dev->power.early_init) {
- spin_lock_init(&dev->power.lock);
- dev->power.qos = NULL;
- dev->power.early_init = true;
- }
-}
-
-static void pm_runtime_early_init(struct device *dev)
-{
- dev->power.disable_depth = 1;
- device_pm_init_common(dev);
-}
-#else
-static void pm_runtime_early_init(struct device *dev) {}
-#endif
-
-/**
- * sh_early_platform_driver_register - register early platform driver
- * @epdrv: sh_early_platform driver structure
- * @buf: string passed from early_param()
- *
- * Helper function for sh_early_platform_init() / sh_early_platform_init_buffer()
- */
-int __init sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf)
-{
- char *tmp;
- int n;
-
- /* Simply add the driver to the end of the global list.
- * Drivers will by default be put on the list in compiled-in order.
- */
- if (!epdrv->list.next) {
- INIT_LIST_HEAD(&epdrv->list);
- list_add_tail(&epdrv->list, &sh_early_platform_driver_list);
- }
-
- /* If the user has specified device then make sure the driver
- * gets prioritized. The driver of the last device specified on
- * command line will be put first on the list.
- */
- n = strlen(epdrv->pdrv->driver.name);
- if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
- list_move(&epdrv->list, &sh_early_platform_driver_list);
-
- /* Allow passing parameters after device name */
- if (buf[n] == '\0' || buf[n] == ',')
- epdrv->requested_id = -1;
- else {
- epdrv->requested_id = simple_strtoul(&buf[n + 1],
- &tmp, 10);
-
- if (buf[n] != '.' || (tmp == &buf[n + 1])) {
- epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
- n = 0;
- } else
- n += strcspn(&buf[n + 1], ",") + 1;
- }
-
- if (buf[n] == ',')
- n++;
-
- if (epdrv->bufsize) {
- memcpy(epdrv->buffer, &buf[n],
- min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1));
- epdrv->buffer[epdrv->bufsize - 1] = '\0';
- }
- }
-
- return 0;
-}
-
-/**
- * sh_early_platform_add_devices - adds a number of early platform devices
- * @devs: array of early platform devices to add
- * @num: number of early platform devices in array
- *
- * Used by early architecture code to register early platform devices and
- * their platform data.
- */
-void __init sh_early_platform_add_devices(struct platform_device **devs, int num)
-{
- struct device *dev;
- int i;
-
- /* simply add the devices to list */
- for (i = 0; i < num; i++) {
- dev = &devs[i]->dev;
-
- if (!dev->devres_head.next) {
- pm_runtime_early_init(dev);
- INIT_LIST_HEAD(&dev->devres_head);
- list_add_tail(&dev->devres_head,
- &sh_early_platform_device_list);
- }
- }
-}
-
-/**
- * sh_early_platform_driver_register_all - register early platform drivers
- * @class_str: string to identify early platform driver class
- *
- * Used by architecture code to register all early platform drivers
- * for a certain class. If omitted then only early platform drivers
- * with matching kernel command line class parameters will be registered.
- */
-void __init sh_early_platform_driver_register_all(char *class_str)
-{
- /* The "class_str" parameter may or may not be present on the kernel
- * command line. If it is present then there may be more than one
- * matching parameter.
- *
- * Since we register our early platform drivers using early_param()
- * we need to make sure that they also get registered in the case
- * when the parameter is missing from the kernel command line.
- *
- * We use parse_early_options() to make sure the early_param() gets
- * called at least once. The early_param() may be called more than
- * once since the name of the preferred device may be specified on
- * the kernel command line. sh_early_platform_driver_register() handles
- * this case for us.
- */
- parse_early_options(class_str);
-}
-
-/**
- * sh_early_platform_match - find early platform device matching driver
- * @epdrv: early platform driver structure
- * @id: id to match against
- */
-static struct platform_device * __init
-sh_early_platform_match(struct sh_early_platform_driver *epdrv, int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id == id)
- return pd;
-
- return NULL;
-}
-
-/**
- * sh_early_platform_left - check if early platform driver has matching devices
- * @epdrv: early platform driver structure
- * @id: return true if id or above exists
- */
-static int __init sh_early_platform_left(struct sh_early_platform_driver *epdrv,
- int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id >= id)
- return 1;
-
- return 0;
-}
-
-/**
- * sh_early_platform_driver_probe_id - probe drivers matching class_str and id
- * @class_str: string to identify early platform driver class
- * @id: id to match against
- * @nr_probe: number of platform devices to successfully probe before exiting
- */
-static int __init sh_early_platform_driver_probe_id(char *class_str,
- int id,
- int nr_probe)
-{
- struct sh_early_platform_driver *epdrv;
- struct platform_device *match;
- int match_id;
- int n = 0;
- int left = 0;
-
- list_for_each_entry(epdrv, &sh_early_platform_driver_list, list) {
- /* only use drivers matching our class_str */
- if (strcmp(class_str, epdrv->class_str))
- continue;
-
- if (id == -2) {
- match_id = epdrv->requested_id;
- left = 1;
-
- } else {
- match_id = id;
- left += sh_early_platform_left(epdrv, id);
-
- /* skip requested id */
- switch (epdrv->requested_id) {
- case EARLY_PLATFORM_ID_ERROR:
- case EARLY_PLATFORM_ID_UNSET:
- break;
- default:
- if (epdrv->requested_id == id)
- match_id = EARLY_PLATFORM_ID_UNSET;
- }
- }
-
- switch (match_id) {
- case EARLY_PLATFORM_ID_ERROR:
- pr_warn("%s: unable to parse %s parameter\n",
- class_str, epdrv->pdrv->driver.name);
- fallthrough;
- case EARLY_PLATFORM_ID_UNSET:
- match = NULL;
- break;
- default:
- match = sh_early_platform_match(epdrv, match_id);
- }
-
- if (match) {
- /*
- * Set up a sensible init_name to enable
- * dev_name() and others to be used before the
- * rest of the driver core is initialized.
- */
- if (!match->dev.init_name && slab_is_available()) {
- if (match->id != -1)
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s.%d",
- match->name,
- match->id);
- else
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s",
- match->name);
-
- if (!match->dev.init_name)
- return -ENOMEM;
- }
-
- if (epdrv->pdrv->probe(match))
- pr_warn("%s: unable to probe %s early.\n",
- class_str, match->name);
- else
- n++;
- }
-
- if (n >= nr_probe)
- break;
- }
-
- if (left)
- return n;
- else
- return -ENODEV;
-}
-
-/**
- * sh_early_platform_driver_probe - probe a class of registered drivers
- * @class_str: string to identify early platform driver class
- * @nr_probe: number of platform devices to successfully probe before exiting
- * @user_only: only probe user specified early platform devices
- *
- * Used by architecture code to probe registered early platform drivers
- * within a certain class. For probe to happen a registered early platform
- * device matching a registered early platform driver is needed.
- */
-int __init sh_early_platform_driver_probe(char *class_str,
- int nr_probe,
- int user_only)
-{
- int k, n, i;
-
- n = 0;
- for (i = -2; n < nr_probe; i++) {
- k = sh_early_platform_driver_probe_id(class_str, i, nr_probe - n);
-
- if (k < 0)
- break;
-
- n += k;
-
- if (user_only)
- break;
- }
-
- return n;
-}
-
-/**
- * early_platform_cleanup - clean up early platform code
- */
-void __init early_platform_cleanup(void)
-{
- struct platform_device *pd, *pd2;
-
- /* clean up the devres list used to chain devices */
- list_for_each_entry_safe(pd, pd2, &sh_early_platform_device_list,
- dev.devres_head) {
- list_del(&pd->dev.devres_head);
- memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
- }
-}
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
deleted file mode 100644
index c95f48ff3f6fb4..00000000000000
--- a/arch/sh/drivers/push-switch.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic push-switch framework
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/push-switch.h>
-
-#define DRV_NAME "push-switch"
-#define DRV_VERSION "0.1.1"
-
-static ssize_t switch_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct push_switch_platform_info *psw_info = dev->platform_data;
- return sprintf(buf, "%s\n", psw_info->name);
-}
-static DEVICE_ATTR_RO(switch);
-
-static void switch_timer(struct timer_list *t)
-{
- struct push_switch *psw = from_timer(psw, t, debounce);
-
- schedule_work(&psw->work);
-}
-
-static void switch_work_handler(struct work_struct *work)
-{
- struct push_switch *psw = container_of(work, struct push_switch, work);
- struct platform_device *pdev = psw->pdev;
-
- psw->state = 0;
-
- kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE);
-}
-
-static int switch_drv_probe(struct platform_device *pdev)
-{
- struct push_switch_platform_info *psw_info;
- struct push_switch *psw;
- int ret, irq;
-
- psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL);
- if (unlikely(!psw))
- return -ENOMEM;
-
- irq = platform_get_irq(pdev, 0);
- if (unlikely(irq < 0)) {
- ret = -ENODEV;
- goto err;
- }
-
- psw_info = pdev->dev.platform_data;
- BUG_ON(!psw_info);
-
- ret = request_irq(irq, psw_info->irq_handler,
- psw_info->irq_flags,
- psw_info->name ? psw_info->name : DRV_NAME, pdev);
- if (unlikely(ret < 0))
- goto err;
-
- if (psw_info->name) {
- ret = device_create_file(&pdev->dev, &dev_attr_switch);
- if (unlikely(ret)) {
- dev_err(&pdev->dev, "Failed creating device attrs\n");
- ret = -EINVAL;
- goto err_irq;
- }
- }
-
- INIT_WORK(&psw->work, switch_work_handler);
- timer_setup(&psw->debounce, switch_timer, 0);
-
- /* Workqueue API brain-damage */
- psw->pdev = pdev;
-
- platform_set_drvdata(pdev, psw);
-
- return 0;
-
-err_irq:
- free_irq(irq, pdev);
-err:
- kfree(psw);
- return ret;
-}
-
-static int switch_drv_remove(struct platform_device *pdev)
-{
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- int irq = platform_get_irq(pdev, 0);
-
- if (psw_info->name)
- device_remove_file(&pdev->dev, &dev_attr_switch);
-
- platform_set_drvdata(pdev, NULL);
- flush_work(&psw->work);
- timer_shutdown_sync(&psw->debounce);
- free_irq(irq, pdev);
-
- kfree(psw);
-
- return 0;
-}
-
-static struct platform_driver switch_driver = {
- .probe = switch_drv_probe,
- .remove = switch_drv_remove,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-static int __init switch_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&switch_driver);
-}
-
-static void __exit switch_exit(void)
-{
- platform_driver_unregister(&switch_driver);
-}
-module_init(switch_init);
-module_exit(switch_exit);
-
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
deleted file mode 100644
index aa6e3267c055d9..00000000000000
--- a/arch/sh/drivers/superhyway/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperHyway specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o
-
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
deleted file mode 100644
index 490142274e3b0a..00000000000000
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/superhyway/ops-sh4-202.c
- *
- * SuperHyway bus support for SH4-202
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000)
-#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000)
-#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000)
-#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000)
-
-#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000)
-#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000)
-#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000)
-
-static struct resource emi_resources[] = {
- [0] = {
- .start = PHYS_EMI_CBLOCK,
- .end = PHYS_EMI_CBLOCK + 0x00300000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EMI_DBLOCK,
- .end = PHYS_EMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device emi_device = {
- .name = "emi",
- .num_resources = ARRAY_SIZE(emi_resources),
- .resource = emi_resources,
-};
-
-static struct resource femi_resources[] = {
- [0] = {
- .start = PHYS_FEMI_CBLOCK,
- .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_FEMI_DBLOCK,
- .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device femi_device = {
- .name = "femi",
- .num_resources = ARRAY_SIZE(femi_resources),
- .resource = femi_resources,
-};
-
-static struct resource epbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1e7ffff8),
- .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EPBR_BLOCK,
- .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device epbr_device = {
- .name = "epbr",
- .num_resources = ARRAY_SIZE(epbr_resources),
- .resource = epbr_resources,
-};
-
-static struct resource dmac_resource = {
- .start = PHYS_DMAC_BLOCK,
- .end = PHYS_DMAC_BLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct superhyway_device dmac_device = {
- .name = "dmac",
- .num_resources = 1,
- .resource = &dmac_resource,
-};
-
-static struct resource pbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1ffffff8),
- .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_PBR_BLOCK,
- .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device pbr_device = {
- .name = "pbr",
- .num_resources = ARRAY_SIZE(pbr_resources),
- .resource = pbr_resources,
-};
-
-static struct superhyway_device *sh4202_devices[] __initdata = {
- &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
-};
-
-static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
-{
- u32 vcrh, vcrl;
- u64 tmp;
-
- /*
- * XXX: Even though the SH4-202 Evaluation Device documentation
- * indicates that VCRL is mapped first with VCRH at a + 0x04
- * offset, the opposite seems to be true.
- *
- * Some modules (PBR and ePBR for instance) also appear to have
- * VCRL/VCRH flipped in the documentation, but on the SH4-202
- * itself it appears that these are all consistently mapped with
- * VCRH preceding VCRL.
- *
- * Do not trust the documentation, for it is evil.
- */
- vcrh = __raw_readl(base);
- vcrl = __raw_readl(base + sizeof(u32));
-
- tmp = ((u64)vcrh << 32) | vcrl;
- memcpy(vcr, &tmp, sizeof(u64));
-
- return 0;
-}
-
-static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
-{
- u64 tmp = *(u64 *)&vcr;
-
- __raw_writel((tmp >> 32) & 0xffffffff, base);
- __raw_writel(tmp & 0xffffffff, base + sizeof(u32));
-
- return 0;
-}
-
-static struct superhyway_ops sh4202_superhyway_ops = {
- .read_vcr = sh4202_read_vcr,
- .write_vcr = sh4202_write_vcr,
-};
-
-struct superhyway_bus superhyway_channels[] = {
- { &sh4202_superhyway_ops, },
- { 0, },
-};
-
-int __init superhyway_scan_bus(struct superhyway_bus *bus)
-{
- return superhyway_add_devices(bus, sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
deleted file mode 100644
index fc44d9c88b4191..00000000000000
--- a/arch/sh/include/asm/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generated-y += syscall_table.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
deleted file mode 100644
index feccfe639e3896..00000000000000
--- a/arch/sh/include/asm/adc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ADC_H
-#define __ASM_ADC_H
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-#include <cpu/adc.h>
-
-int adc_single(unsigned int channel);
-
-#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
deleted file mode 100644
index 468fba333e896b..00000000000000
--- a/arch/sh/include/asm/addrspace.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#include <cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
- [ P0/U0 (virtual) ] 0x00000000 <------ User space
- [ P1 (fixed) cached ] 0x80000000 <------ Kernel space
- [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access
- [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area
- [ P4 control ] 0xE0000000
- */
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#else
-/*
- * These will never work in 32-bit, don't even bother.
- */
-#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#endif
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000)
-
-#ifdef CONFIG_SH_STORE_QUEUES
-/*
- * This is a special case for the SH-4 store queues, as pages for this
- * space still need to be faulted in before it's possible to flush the
- * store queue cache for writeout to the remapped region.
- */
-#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000)
-#else
-#define P3_ADDR_MAX P4SEG
-#endif
-
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/alignment.h b/arch/sh/include/asm/alignment.h
deleted file mode 100644
index 4f3e715b8c2668..00000000000000
--- a/arch/sh/include/asm/alignment.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ALIGNMENT_H
-#define __ASM_SH_ALIGNMENT_H
-
-#include <linux/types.h>
-
-extern void inc_unaligned_byte_access(void);
-extern void inc_unaligned_word_access(void);
-extern void inc_unaligned_dword_access(void);
-extern void inc_unaligned_multi_access(void);
-extern void inc_unaligned_user_access(void);
-extern void inc_unaligned_kernel_access(void);
-
-#define UM_WARN (1 << 0)
-#define UM_FIXUP (1 << 1)
-#define UM_SIGNAL (1 << 2)
-
-extern unsigned int unaligned_user_action(void);
-
-extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
-
-#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/arch/sh/include/asm/asm-offsets.h b/arch/sh/include/asm/asm-offsets.h
deleted file mode 100644
index 9f8535716392cc..00000000000000
--- a/arch/sh/include/asm/asm-offsets.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <generated/asm-offsets.h>
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
deleted file mode 100644
index 059791fd394fc4..00000000000000
--- a/arch/sh/include/asm/atomic-grb.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_GRB_H
-#define __ASM_SH_ATOMIC_GRB_H
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
-} \
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return tmp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- int res, tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%2, %0 \n\t" /* load old value */ \
- " mov %0, %1 \n\t" /* save old value */ \
- " " #op " %3, %0 \n\t" /* $op */ \
- " mov.l %0, @%2 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), "=&r" (res), "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
deleted file mode 100644
index 7665de9d00d0d1..00000000000000
--- a/arch/sh/include/asm/atomic-irq.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_IRQ_H
-#define __ASM_SH_ATOMIC_IRQ_H
-
-#include <linux/irqflags.h>
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op, c_op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
-}
-
-#define ATOMIC_OP_RETURN(op, c_op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- temp c_op i; \
- v->counter = temp; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op, c_op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_OP_RETURN(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(add, +=)
-ATOMIC_OPS(sub, -=)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(and, &=)
-ATOMIC_OPS(or, |=)
-ATOMIC_OPS(xor, ^=)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
deleted file mode 100644
index b63dcfbfa14ef5..00000000000000
--- a/arch/sh/include/asm/atomic-llsc.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_LLSC_H
-#define __ASM_SH_ATOMIC_LLSC_H
-
-/*
- * SH-4A note:
- *
- * We basically get atomic_xxx_return() for free compared with
- * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
- * encoding, so the retval is automatically set without having to
- * do any special work.
- */
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long tmp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "\n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
- : "=&z" (tmp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
-}
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "_return \n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long res, temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%3, %0 ! atomic_fetch_" #op " \n" \
-" mov %0, %1 \n" \
-" " #op " %2, %0 \n" \
-" movco.l %0, @%3 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp), "=&r" (res) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
deleted file mode 100644
index 528bfeda78f569..00000000000000
--- a/arch/sh/include/asm/atomic.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_H
-#define __ASM_SH_ATOMIC_H
-
-#if defined(CONFIG_CPU_J2)
-
-#include <asm-generic/atomic.h>
-
-#else
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- *
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-#include <asm/barrier.h>
-
-#define arch_atomic_read(v) READ_ONCE((v)->counter)
-#define arch_atomic_set(v,i) WRITE_ONCE((v)->counter, (i))
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/atomic-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/atomic-llsc.h>
-#else
-#include <asm/atomic-irq.h>
-#endif
-
-#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
-#define arch_atomic_cmpxchg(v, o, n) (arch_cmpxchg(&((v)->counter), (o), (n)))
-
-#endif /* CONFIG_CPU_J2 */
-
-#endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h
deleted file mode 100644
index 0d58a0159aa6dc..00000000000000
--- a/arch/sh/include/asm/barrier.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-#ifndef __ASM_SH_BARRIER_H
-#define __ASM_SH_BARRIER_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/cache_insns.h>
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A)
-#define mb() __asm__ __volatile__ ("synco": : :"memory")
-#define rmb() mb()
-#define wmb() mb()
-#define ctrl_barrier() __icbi(PAGE_OFFSET)
-#else
-#if defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#define __smp_mb() do { int tmp = 0; __asm__ __volatile__ ("cas.l %0,%0,@%1" : "+r"(tmp) : "z"(&tmp) : "memory", "t"); } while(0)
-#define __smp_rmb() __smp_mb()
-#define __smp_wmb() __smp_mb()
-#endif
-#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#endif
-
-#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#include <asm-generic/barrier.h>
-
-#endif /* __ASM_SH_BARRIER_H */
diff --git a/arch/sh/include/asm/bitops-cas.h b/arch/sh/include/asm/bitops-cas.h
deleted file mode 100644
index ba517b3f24da62..00000000000000
--- a/arch/sh/include/asm/bitops-cas.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_CAS_H
-#define __ASM_SH_BITOPS_CAS_H
-
-static inline unsigned __bo_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-
- return !!(old & mask);
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_CAS_H */
diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
deleted file mode 100644
index 75b5980399d44d..00000000000000
--- a/arch/sh/include/asm/bitops-grb.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_GRB_H
-#define __ASM_SH_BITOPS_GRB_H
-
-static inline void set_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " or %2, %0 \n\t" /* or */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void clear_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = ~(1 << (nr & 0x1f));
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " and %2, %0 \n\t" /* and */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void change_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " xor %2, %0 \n\t" /* xor */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline int test_and_set_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t"
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " or %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1" ,"t");
-
- return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void * addr)
-{
- int mask, retval,not_mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- not_mask = ~mask;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " and %4, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask),
- "r" (not_mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " xor %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h
deleted file mode 100644
index 47036845fc6837..00000000000000
--- a/arch/sh/include/asm/bitops-llsc.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_LLSC_H
-#define __ASM_SH_BITOPS_LLSC_H
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! set_bit \n\t"
- "or %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! clear_bit \n\t"
- "and %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (~mask)
- : "t", "memory"
- );
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! change_bit \n\t"
- "xor %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_set_bit \n\t"
- "mov %0, %1 \n\t"
- "or %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_clear_bit \n\t"
- "mov %0, %1 \n\t"
- "and %4, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask), "r" (~mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_change_bit \n\t"
- "mov %0, %1 \n\t"
- "xor %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_LLSC_H */
diff --git a/arch/sh/include/asm/bitops-op32.h b/arch/sh/include/asm/bitops-op32.h
deleted file mode 100644
index 5ace89b4650791..00000000000000
--- a/arch/sh/include/asm/bitops-op32.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_OP32_H
-#define __ASM_SH_BITOPS_OP32_H
-
-#include <linux/bits.h>
-
-/*
- * The bit modifying instructions on SH-2A are only capable of working
- * with a 3-bit immediate, which signifies the shift position for the bit
- * being worked on.
- */
-#if defined(__BIG_ENDIAN)
-#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
-#define BYTE_NUMBER(nr) ((nr ^ BITOP_LE_SWIZZLE) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr ^ BITOP_LE_SWIZZLE) % BITS_PER_BYTE)
-#else
-#define BYTE_NUMBER(nr) ((nr) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr) % BITS_PER_BYTE)
-#endif
-
-static __always_inline void
-arch___set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bset.b %1, @(%O2,%0) ! __set_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)), "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p |= mask;
- }
-}
-
-static __always_inline void
-arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bclr.b %1, @(%O2,%0) ! __clear_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p &= ~mask;
- }
-}
-
-/**
- * arch___change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __always_inline void
-arch___change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bxor.b %1, @(%O2,%0) ! __change_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p ^= mask;
- }
-}
-
-/**
- * arch___test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old | mask;
- return (old & mask) != 0;
-}
-
-/**
- * arch___test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old & ~mask;
- return (old & mask) != 0;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __always_inline bool
-arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old ^ mask;
- return (old & mask) != 0;
-}
-
-#define arch_test_bit generic_test_bit
-#define arch_test_bit_acquire generic_test_bit_acquire
-
-#include <asm-generic/bitops/non-instrumented-non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_OP32_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
deleted file mode 100644
index 10ceb0d6b5a997..00000000000000
--- a/arch/sh/include/asm/bitops.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_H
-#define __ASM_SH_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/* For __swab32 */
-#include <asm/byteorder.h>
-#include <asm/barrier.h>
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/bitops-grb.h>
-#elif defined(CONFIG_CPU_SH2A)
-#include <asm-generic/bitops/atomic.h>
-#include <asm/bitops-op32.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/bitops-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/bitops-cas.h>
-#else
-#include <asm-generic/bitops/atomic.h>
-#include <asm-generic/bitops/non-atomic.h>
-#endif
-
-static inline unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bt/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bf/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/le.h>
-
-#endif /* __ASM_SH_BITOPS_H */
diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h
deleted file mode 100644
index 5d04f2c6256376..00000000000000
--- a/arch/sh/include/asm/bl_bit.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/bl_bit_32.h>
diff --git a/arch/sh/include/asm/bl_bit_32.h b/arch/sh/include/asm/bl_bit_32.h
deleted file mode 100644
index 1f7d225fc604f8..00000000000000
--- a/arch/sh/include/asm/bl_bit_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BL_BIT_32_H
-#define __ASM_SH_BL_BIT_32_H
-
-static inline void set_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or %2, %0\n\t"
- "and %3, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "r" (0x10000000), "r" (0xffffff0f)
- : "memory"
- );
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %2, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~0x10000000)
- : "memory"
- );
-}
-
-#endif /* __ASM_SH_BL_BIT_32_H */
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
deleted file mode 100644
index 05a485c4fabcfc..00000000000000
--- a/arch/sh/include/asm/bug.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUG_H
-#define __ASM_SH_BUG_H
-
-#include <linux/linkage.h>
-
-#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */
-#define BUGFLAG_UNWINDER (1 << 1)
-
-#ifdef CONFIG_GENERIC_BUG
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-/**
- * _EMIT_BUG_ENTRY
- * %1 - __FILE__
- * %2 - __LINE__
- * %3 - trap type
- * %4 - sizeof(struct bug_entry)
- *
- * The trapa opcode itself sits in %0.
- * The %O notation is used to avoid # generation.
- *
- * The offending file and line are encoded in the __bug_table section.
- */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b, %O1\n" \
- "\t.short %O2, %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#else
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b\n" \
- "\t.short %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#endif
-
-#define BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), "i" (0), \
- "i" (sizeof(struct bug_entry))); \
- unreachable(); \
-} while (0)
-
-#define __WARN_FLAGS(flags) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_WARNING|(flags)), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define WARN_ON(x) ({ \
- int __ret_warn_on = !!(x); \
- if (__builtin_constant_p(__ret_warn_on)) { \
- if (__ret_warn_on) \
- __WARN(); \
- } else { \
- if (unlikely(__ret_warn_on)) \
- __WARN(); \
- } \
- unlikely(__ret_warn_on); \
-})
-
-#define UNWINDER_BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_UNWINDER), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define UNWINDER_BUG_ON(x) ({ \
- int __ret_unwinder_on = !!(x); \
- if (__builtin_constant_p(__ret_unwinder_on)) { \
- if (__ret_unwinder_on) \
- UNWINDER_BUG(); \
- } else { \
- if (unlikely(__ret_unwinder_on)) \
- UNWINDER_BUG(); \
- } \
- unlikely(__ret_unwinder_on); \
-})
-
-#else
-
-#define UNWINDER_BUG BUG
-#define UNWINDER_BUG_ON BUG_ON
-
-#endif /* CONFIG_GENERIC_BUG */
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-
-/* arch/sh/kernel/traps.c */
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
-extern void die_if_no_fixup(const char *str, struct pt_regs *regs, long err);
-
-#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
deleted file mode 100644
index fe52abb69cea31..00000000000000
--- a/arch/sh/include/asm/bugs.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-extern void select_idle_routine(void);
-
-static void __init check_bugs(void)
-{
- extern unsigned long loops_per_jiffy;
- char *p = &init_utsname()->machine[2]; /* "sh" */
-
- select_idle_routine();
-
- current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
- switch (current_cpu_data.family) {
- case CPU_FAMILY_SH2:
- *p++ = '2';
- break;
- case CPU_FAMILY_SH2A:
- *p++ = '2';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH3:
- *p++ = '3';
- break;
- case CPU_FAMILY_SH4:
- *p++ = '4';
- break;
- case CPU_FAMILY_SH4A:
- *p++ = '4';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH4AL_DSP:
- *p++ = '4';
- *p++ = 'a';
- *p++ = 'l';
- *p++ = '-';
- *p++ = 'd';
- *p++ = 's';
- *p++ = 'p';
- break;
- case CPU_FAMILY_UNKNOWN:
- /*
- * Specifically use CPU_FAMILY_UNKNOWN rather than
- * default:, so we're able to have the compiler whine
- * about unhandled enumerations.
- */
- break;
- }
-
- printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
- /* 'eb' means 'Endian Big' */
- *p++ = 'e';
- *p++ = 'b';
-#endif
- *p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
deleted file mode 100644
index 32dfa6b82ec663..00000000000000
--- a/arch/sh/include/asm/cache.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-
-#include <linux/init.h>
-#include <cpu/cache.h>
-
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __section(".data..read_mostly")
-
-#ifndef __ASSEMBLY__
-struct cache_info {
- unsigned int ways; /* Number of cache ways */
- unsigned int sets; /* Number of cache sets */
- unsigned int linesz; /* Cache line size (bytes) */
-
- unsigned int way_size; /* sets * line size */
-
- /*
- * way_incr is the address offset for accessing the next way
- * in memory mapped cache array ops.
- */
- unsigned int way_incr;
- unsigned int entry_shift;
- unsigned int entry_mask;
-
- /*
- * Compute a mask which selects the address bits which overlap between
- * 1. those used to select the cache set during indexing
- * 2. those in the physical page number.
- */
- unsigned int alias_mask;
- unsigned int n_aliases; /* Number of aliases */
-
- unsigned long flags;
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h
deleted file mode 100644
index d7edd5297bd0f8..00000000000000
--- a/arch/sh/include/asm/cache_insns.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/cache_insns_32.h>
diff --git a/arch/sh/include/asm/cache_insns_32.h b/arch/sh/include/asm/cache_insns_32.h
deleted file mode 100644
index 470880b972cb1e..00000000000000
--- a/arch/sh/include/asm/cache_insns_32.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHE_INSNS_32_H
-#define __ASM_SH_CACHE_INSNS_32_H
-
-#include <linux/types.h>
-
-#if defined(CONFIG_CPU_SH4A)
-#define __icbi(addr) __asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
-#else
-#define __icbi(addr) mb()
-#endif
-
-#define __ocbp(addr) __asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
-#define __ocbi(addr) __asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
-#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
-
-static inline reg_size_t register_align(void *val)
-{
- return (unsigned long)(signed long)val;
-}
-
-#endif /* __ASM_SH_CACHE_INSNS_32_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
deleted file mode 100644
index 481a664287e2e4..00000000000000
--- a/arch/sh/include/asm/cacheflush.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/*
- * Cache flushing:
- *
- * - flush_cache_all() flushes entire cache
- * - flush_cache_mm(mm) flushes the specified mm context's cache lines
- * - flush_cache_dup mm(mm) handles cache flushing when forking
- * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- * - flush_cache_range(vma, start, end) flushes a range of pages
- *
- * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_range(start, end) flushes(invalidates) a range for icache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- * - flush_cache_sigtramp(vaddr) flushes the signal trampoline
- */
-extern void (*local_flush_cache_all)(void *args);
-extern void (*local_flush_cache_mm)(void *args);
-extern void (*local_flush_cache_dup_mm)(void *args);
-extern void (*local_flush_cache_page)(void *args);
-extern void (*local_flush_cache_range)(void *args);
-extern void (*local_flush_dcache_page)(void *args);
-extern void (*local_flush_icache_range)(void *args);
-extern void (*local_flush_icache_page)(void *args);
-extern void (*local_flush_cache_sigtramp)(void *args);
-
-static inline void cache_noop(void *args) { }
-
-extern void (*__flush_wback_region)(void *start, int size);
-extern void (*__flush_purge_region)(void *start, int size);
-extern void (*__flush_invalidate_region)(void *start, int size);
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_dup_mm(struct mm_struct *mm);
-extern void flush_cache_page(struct vm_area_struct *vma,
- unsigned long addr, unsigned long pfn);
-extern void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-void flush_dcache_page(struct page *page);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_user_range flush_icache_range
-extern void flush_icache_page(struct vm_area_struct *vma,
- struct page *page);
-extern void flush_cache_sigtramp(unsigned long address);
-
-struct flusher_data {
- struct vm_area_struct *vma;
- unsigned long addr1, addr2;
-};
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-extern void __flush_anon_page(struct page *page, unsigned long);
-
-static inline void flush_anon_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vmaddr)
-{
- if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
- __flush_anon_page(page, vmaddr);
-}
-
-#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
-static inline void flush_kernel_vmap_range(void *addr, int size)
-{
- __flush_wback_region(addr, size);
-}
-static inline void invalidate_kernel_vmap_range(void *addr, int size)
-{
- __flush_invalidate_region(addr, size);
-}
-
-extern void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-#define flush_cache_vmap(start, end) local_flush_cache_all(NULL)
-#define flush_cache_vunmap(start, end) local_flush_cache_all(NULL)
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-void kmap_coherent_init(void);
-void *kmap_coherent(struct page *page, unsigned long addr);
-void kunmap_coherent(void *kvaddr);
-
-#define PG_dcache_clean PG_arch_1
-
-void cpu_cache_init(void);
-
-static inline void *sh_cacheop_vaddr(void *vaddr)
-{
- if (__in_29bit_mode())
- vaddr = (void *)CAC_ADDR((unsigned long)vaddr);
- return vaddr;
-}
-
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
deleted file mode 100644
index 00e39dd0d146a3..00000000000000
--- a/arch/sh/include/asm/checksum.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/checksum_32.h>
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
deleted file mode 100644
index a6501b856f3eb4..00000000000000
--- a/arch/sh/include/asm/checksum_32.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CHECKSUM_H
-#define __ASM_SH_CHECKSUM_H
-
-/*
- * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
- */
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len);
-
-#define _HAVE_ARCH_CSUM_AND_COPY
-/*
- * Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
- * access_ok().
- */
-static inline
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len)
-{
- return csum_partial_copy_generic(src, dst, len);
-}
-
-#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
-static inline
-__wsum csum_and_copy_from_user(const void __user *src, void *dst, int len)
-{
- if (!access_ok(src, len))
- return 0;
- return csum_partial_copy_generic((__force const void *)src, dst, len);
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int __dummy;
- __asm__("swap.w %0, %1\n\t"
- "extu.w %0, %0\n\t"
- "extu.w %1, %1\n\t"
- "add %1, %0\n\t"
- "swap.w %0, %1\n\t"
- "add %1, %0\n\t"
- "not %0, %0\n\t"
- : "=r" (sum), "=&r" (__dummy)
- : "0" (sum)
- : "t");
- return (__force __sum16)sum;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
- * for linux by * Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- __wsum sum;
- unsigned int __dummy0, __dummy1;
-
- __asm__ __volatile__(
- "mov.l @%1+, %0\n\t"
- "mov.l @%1+, %3\n\t"
- "add #-2, %2\n\t"
- "clrt\n\t"
- "1:\t"
- "addc %3, %0\n\t"
- "movt %4\n\t"
- "mov.l @%1+, %3\n\t"
- "dt %2\n\t"
- "bf/s 1b\n\t"
- " cmp/eq #1, %4\n\t"
- "addc %3, %0\n\t"
- "addc %2, %0" /* Here %2 is 0, add carry-bit */
- /* Since the input registers which are loaded with iph and ihl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
- : "1" (iph), "2" (ihl)
- : "t", "memory");
-
- return csum_fold(sum);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
-#ifdef __LITTLE_ENDIAN__
- unsigned long len_proto = (proto + len) << 8;
-#else
- unsigned long len_proto = proto + len;
-#endif
- __asm__("clrt\n\t"
- "addc %0, %1\n\t"
- "addc %2, %1\n\t"
- "addc %3, %1\n\t"
- "movt %0\n\t"
- "add %1, %0"
- : "=r" (sum), "=r" (len_proto)
- : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
- : "t");
-
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, __u8 proto, __wsum sum)
-{
- unsigned int __dummy;
- __asm__("clrt\n\t"
- "mov.l @(0,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(0,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%3), %1\n\t"
- "addc %1, %0\n\t"
- "addc %4, %0\n\t"
- "addc %5, %0\n\t"
- "movt %1\n\t"
- "add %1, %0\n"
- : "=r" (sum), "=&r" (__dummy)
- : "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
- : "t");
-
- return csum_fold(sum);
-}
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user(const void *src,
- void __user *dst,
- int len)
-{
- if (!access_ok(dst, len))
- return 0;
- return csum_partial_copy_generic(src, (__force void *)dst, len);
-}
-#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
deleted file mode 100644
index b65bc2908e8aaf..00000000000000
--- a/arch/sh/include/asm/clock.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/sh_clk.h>
-
-/* Should be defined by processor-specific code */
-void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
-int __init arch_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock-cpg.c */
-int __init __deprecated cpg_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-cas.h b/arch/sh/include/asm/cmpxchg-cas.h
deleted file mode 100644
index f508db6eaf3192..00000000000000
--- a/arch/sh/include/asm/cmpxchg-cas.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_CAS_H
-#define __ASM_SH_CMPXCHG_CAS_H
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(m)
- : "t", "memory" );
- return new;
-}
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long old;
- do old = *m;
- while (__cmpxchg_u32(m, old, val) != old);
- return old;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_CAS_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
deleted file mode 100644
index e12279ea35cf74..00000000000000
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_GRB_H
-#define __ASM_SH_CMPXCHG_GRB_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-4, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " mov.l %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory", "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.w @%1, %0 \n\t" /* load old value */
- " extu.w %0, %0 \n\t" /* extend as unsigned */
- " mov.w %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.b @%1, %0 \n\t" /* load old value */
- " extu.b %0, %0 \n\t" /* extend as unsigned */
- " mov.b %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%3, %0 \n\t" /* load old value */
- " cmp/eq %0, %1 \n\t"
- " bf 1f \n\t" /* if not equal */
- " mov.l %2, @%3 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (old), "+r" (new) /* old or new can be r15 */
- : "r" (m)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
deleted file mode 100644
index 07d3e7f0838919..00000000000000
--- a/arch/sh/include/asm/cmpxchg-irq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_IRQ_H
-#define __ASM_SH_CMPXCHG_IRQ_H
-
-#include <linux/irqflags.h>
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val & 0xff;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- __u32 retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags); /* implies memory barrier */
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
deleted file mode 100644
index d5270cd297c142..00000000000000
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_LLSC_H
-#define __ASM_SH_CMPXCHG_LLSC_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! xchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "mov %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z"(tmp), "=&r" (retval)
- : "r" (m), "r" (val)
- : "t", "memory"
- );
-
- return retval;
-}
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! __cmpxchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "cmp/eq %1, %3 \n\t"
- "bf 2f \n\t"
- "mov %4, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
- : "t", "memory"
- );
-
- return retval;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/arch/sh/include/asm/cmpxchg-xchg.h b/arch/sh/include/asm/cmpxchg-xchg.h
deleted file mode 100644
index c373f21efe4d90..00000000000000
--- a/arch/sh/include/asm/cmpxchg-xchg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_XCHG_H
-#define __ASM_SH_CMPXCHG_XCHG_H
-
-/*
- * Copyright (C) 2016 Red Hat, Inc.
- * Author: Michael S. Tsirkin <mst@redhat.com>
- */
-#include <linux/bits.h>
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-/*
- * Portable implementations of 1 and 2 byte xchg using a 4 byte cmpxchg.
- * Note: this header isn't self-contained: before including it, __cmpxchg_u32
- * must be defined first.
- */
-static inline u32 __xchg_cmpxchg(volatile void *ptr, u32 x, int size)
-{
- int off = (unsigned long)ptr % sizeof(u32);
- volatile u32 *p = ptr - off;
-#ifdef __BIG_ENDIAN
- int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
-#else
- int bitoff = off * BITS_PER_BYTE;
-#endif
- u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
- u32 oldv, newv;
- u32 ret;
-
- do {
- oldv = READ_ONCE(*p);
- ret = (oldv & bitmask) >> bitoff;
- newv = (oldv & ~bitmask) | (x << bitoff);
- } while (__cmpxchg_u32(p, oldv, newv) != oldv);
-
- return ret;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-#endif /* __ASM_SH_CMPXCHG_XCHG_H */
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
deleted file mode 100644
index 0ed9b3f4a57796..00000000000000
--- a/arch/sh/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_H
-#define __ASM_SH_CMPXCHG_H
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/cmpxchg-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/cmpxchg-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/cmpxchg-cas.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size) \
-({ \
- unsigned long __xchg__res; \
- volatile void *__xchg_ptr = (ptr); \
- switch (size) { \
- case 4: \
- __xchg__res = xchg_u32(__xchg_ptr, x); \
- break; \
- case 2: \
- __xchg__res = xchg_u16(__xchg_ptr, x); \
- break; \
- case 1: \
- __xchg__res = xchg_u8(__xchg_ptr, x); \
- break; \
- default: \
- __xchg_called_with_bad_pointer(); \
- __xchg__res = x; \
- break; \
- } \
- \
- __xchg__res; \
-})
-
-#define arch_xchg(ptr,x) \
- ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define arch_cmpxchg(ptr,o,n) \
- ({ \
- __typeof__(*(ptr)) _o_ = (o); \
- __typeof__(*(ptr)) _n_ = (n); \
- (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
- (unsigned long)_n_, sizeof(*(ptr))); \
- })
-
-#endif /* __ASM_SH_CMPXCHG_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
deleted file mode 100644
index 6f3e686a1c6f3e..00000000000000
--- a/arch/sh/include/asm/device.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Arch specific extensions to struct device
- */
-#ifndef __ASM_SH_DEVICE_H
-#define __ASM_SH_DEVICE_H
-
-#include <asm-generic/device.h>
-
-struct platform_device;
-/* allocate contiguous memory chunk and fill in struct resource */
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize);
-
-void plat_early_device_setup(void);
-
-#endif /* __ASM_SH_DEVICE_H */
diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h
deleted file mode 100644
index 724dab912b7108..00000000000000
--- a/arch/sh/include/asm/dma-register.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Common header for the legacy SH DMA driver and the new dmaengine driver
- *
- * extracted from arch/sh/include/asm/dma-sh.h:
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-/* DMAOR definitions */
-#define DMAOR_AE 0x00000004 /* Address Error Flag */
-#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001 /* DMA Master Enable */
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L 0x00000000
-#define REQ_E 0x00080000
-#define RACK_H 0x00000000
-#define RACK_L 0x00040000
-#define ACK_R 0x00000000
-#define ACK_W 0x00020000
-#define ACK_H 0x00000000
-#define ACK_L 0x00010000
-#define DM_INC 0x00004000 /* Destination addresses are incremented */
-#define DM_DEC 0x00008000 /* Destination addresses are decremented */
-#define DM_FIX 0x0000c000 /* Destination address is fixed */
-#define SM_INC 0x00001000 /* Source addresses are incremented */
-#define SM_DEC 0x00002000 /* Source addresses are decremented */
-#define SM_FIX 0x00003000 /* Source address is fixed */
-#define RS_IN 0x00000200
-#define RS_OUT 0x00000300
-#define RS_AUTO 0x00000400 /* Auto Request */
-#define RS_ERS 0x00000800 /* DMA extended resource selector */
-#define TS_BLK 0x00000040
-#define TM_BUR 0x00000020
-#define CHCR_DE 0x00000001 /* DMA Enable */
-#define CHCR_TE 0x00000002 /* Transfer End Flag */
-#define CHCR_IE 0x00000004 /* Interrupt Enable */
-
-#endif
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
deleted file mode 100644
index c8bee3f985a293..00000000000000
--- a/arch/sh/include/asm/dma.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm-generic/dma.h>
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ 0x00
-#define DMA_MODE_WRITE 0x01
-#define DMA_MODE_MASK 0x01
-
-#define DMA_AUTOINIT 0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
- DMAC_CHANNELS_CONFIGURED = 0x01,
- DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
- DMA_CONFIGURED = 0x01,
-
- /*
- * Transfer end interrupt, inherited from DMAC.
- * wait_queue used in dma_wait_for_completion.
- */
- DMA_TEI_CAPABLE = 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
- int (*request)(struct dma_channel *chan);
- void (*free)(struct dma_channel *chan);
-
- int (*get_residue)(struct dma_channel *chan);
- int (*xfer)(struct dma_channel *chan);
- int (*configure)(struct dma_channel *chan, unsigned long flags);
- int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
- char dev_id[16]; /* unique name per DMAC of channel */
-
- unsigned int chan; /* DMAC channel number */
- unsigned int vchan; /* Virtual channel number */
-
- unsigned int mode;
- unsigned int count;
-
- unsigned long sar;
- unsigned long dar;
-
- const char **caps;
-
- unsigned long flags;
- atomic_t busy;
-
- wait_queue_head_t wait_queue;
-
- struct device dev;
- void *priv_data;
-};
-
-struct dma_info {
- struct platform_device *pdev;
-
- const char *name;
- unsigned int nr_channels;
- unsigned long flags;
-
- struct dma_ops *ops;
- struct dma_channel *channels;
-
- struct list_head list;
- int first_channel_nr;
- int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
- int ch_num;
- const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to) \
- dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to) \
- dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
- const char *dev_id);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#endif /* __ASM_SH_DMA_H */
diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h
deleted file mode 100644
index 69e119cfd711e2..00000000000000
--- a/arch/sh/include/asm/dmabrg.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * SH7760 DMABRG (USB/Audio) support
- */
-
-#ifndef _DMABRG_H_
-#define _DMABRG_H_
-
-/* IRQ sources */
-#define DMABRGIRQ_USBDMA 0
-#define DMABRGIRQ_USBDMAERR 1
-#define DMABRGIRQ_A0TXF 2
-#define DMABRGIRQ_A0TXH 3
-#define DMABRGIRQ_A0RXF 4
-#define DMABRGIRQ_A0RXH 5
-#define DMABRGIRQ_A1TXF 6
-#define DMABRGIRQ_A1TXH 7
-#define DMABRGIRQ_A1RXF 8
-#define DMABRGIRQ_A1RXH 9
-
-extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
-extern void dmabrg_free_irq(unsigned int);
-
-#endif
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
deleted file mode 100644
index 57195447412212..00000000000000
--- a/arch/sh/include/asm/dwarf.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- */
-#ifndef __ASM_SH_DWARF_H
-#define __ASM_SH_DWARF_H
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-/*
- * DWARF expression operations
- */
-#define DW_OP_addr 0x03
-#define DW_OP_deref 0x06
-#define DW_OP_const1u 0x08
-#define DW_OP_const1s 0x09
-#define DW_OP_const2u 0x0a
-#define DW_OP_const2s 0x0b
-#define DW_OP_const4u 0x0c
-#define DW_OP_const4s 0x0d
-#define DW_OP_const8u 0x0e
-#define DW_OP_const8s 0x0f
-#define DW_OP_constu 0x10
-#define DW_OP_consts 0x11
-#define DW_OP_dup 0x12
-#define DW_OP_drop 0x13
-#define DW_OP_over 0x14
-#define DW_OP_pick 0x15
-#define DW_OP_swap 0x16
-#define DW_OP_rot 0x17
-#define DW_OP_xderef 0x18
-#define DW_OP_abs 0x19
-#define DW_OP_and 0x1a
-#define DW_OP_div 0x1b
-#define DW_OP_minus 0x1c
-#define DW_OP_mod 0x1d
-#define DW_OP_mul 0x1e
-#define DW_OP_neg 0x1f
-#define DW_OP_not 0x20
-#define DW_OP_or 0x21
-#define DW_OP_plus 0x22
-#define DW_OP_plus_uconst 0x23
-#define DW_OP_shl 0x24
-#define DW_OP_shr 0x25
-#define DW_OP_shra 0x26
-#define DW_OP_xor 0x27
-#define DW_OP_skip 0x2f
-#define DW_OP_bra 0x28
-#define DW_OP_eq 0x29
-#define DW_OP_ge 0x2a
-#define DW_OP_gt 0x2b
-#define DW_OP_le 0x2c
-#define DW_OP_lt 0x2d
-#define DW_OP_ne 0x2e
-#define DW_OP_lit0 0x30
-#define DW_OP_lit1 0x31
-#define DW_OP_lit2 0x32
-#define DW_OP_lit3 0x33
-#define DW_OP_lit4 0x34
-#define DW_OP_lit5 0x35
-#define DW_OP_lit6 0x36
-#define DW_OP_lit7 0x37
-#define DW_OP_lit8 0x38
-#define DW_OP_lit9 0x39
-#define DW_OP_lit10 0x3a
-#define DW_OP_lit11 0x3b
-#define DW_OP_lit12 0x3c
-#define DW_OP_lit13 0x3d
-#define DW_OP_lit14 0x3e
-#define DW_OP_lit15 0x3f
-#define DW_OP_lit16 0x40
-#define DW_OP_lit17 0x41
-#define DW_OP_lit18 0x42
-#define DW_OP_lit19 0x43
-#define DW_OP_lit20 0x44
-#define DW_OP_lit21 0x45
-#define DW_OP_lit22 0x46
-#define DW_OP_lit23 0x47
-#define DW_OP_lit24 0x48
-#define DW_OP_lit25 0x49
-#define DW_OP_lit26 0x4a
-#define DW_OP_lit27 0x4b
-#define DW_OP_lit28 0x4c
-#define DW_OP_lit29 0x4d
-#define DW_OP_lit30 0x4e
-#define DW_OP_lit31 0x4f
-#define DW_OP_reg0 0x50
-#define DW_OP_reg1 0x51
-#define DW_OP_reg2 0x52
-#define DW_OP_reg3 0x53
-#define DW_OP_reg4 0x54
-#define DW_OP_reg5 0x55
-#define DW_OP_reg6 0x56
-#define DW_OP_reg7 0x57
-#define DW_OP_reg8 0x58
-#define DW_OP_reg9 0x59
-#define DW_OP_reg10 0x5a
-#define DW_OP_reg11 0x5b
-#define DW_OP_reg12 0x5c
-#define DW_OP_reg13 0x5d
-#define DW_OP_reg14 0x5e
-#define DW_OP_reg15 0x5f
-#define DW_OP_reg16 0x60
-#define DW_OP_reg17 0x61
-#define DW_OP_reg18 0x62
-#define DW_OP_reg19 0x63
-#define DW_OP_reg20 0x64
-#define DW_OP_reg21 0x65
-#define DW_OP_reg22 0x66
-#define DW_OP_reg23 0x67
-#define DW_OP_reg24 0x68
-#define DW_OP_reg25 0x69
-#define DW_OP_reg26 0x6a
-#define DW_OP_reg27 0x6b
-#define DW_OP_reg28 0x6c
-#define DW_OP_reg29 0x6d
-#define DW_OP_reg30 0x6e
-#define DW_OP_reg31 0x6f
-#define DW_OP_breg0 0x70
-#define DW_OP_breg1 0x71
-#define DW_OP_breg2 0x72
-#define DW_OP_breg3 0x73
-#define DW_OP_breg4 0x74
-#define DW_OP_breg5 0x75
-#define DW_OP_breg6 0x76
-#define DW_OP_breg7 0x77
-#define DW_OP_breg8 0x78
-#define DW_OP_breg9 0x79
-#define DW_OP_breg10 0x7a
-#define DW_OP_breg11 0x7b
-#define DW_OP_breg12 0x7c
-#define DW_OP_breg13 0x7d
-#define DW_OP_breg14 0x7e
-#define DW_OP_breg15 0x7f
-#define DW_OP_breg16 0x80
-#define DW_OP_breg17 0x81
-#define DW_OP_breg18 0x82
-#define DW_OP_breg19 0x83
-#define DW_OP_breg20 0x84
-#define DW_OP_breg21 0x85
-#define DW_OP_breg22 0x86
-#define DW_OP_breg23 0x87
-#define DW_OP_breg24 0x88
-#define DW_OP_breg25 0x89
-#define DW_OP_breg26 0x8a
-#define DW_OP_breg27 0x8b
-#define DW_OP_breg28 0x8c
-#define DW_OP_breg29 0x8d
-#define DW_OP_breg30 0x8e
-#define DW_OP_breg31 0x8f
-#define DW_OP_regx 0x90
-#define DW_OP_fbreg 0x91
-#define DW_OP_bregx 0x92
-#define DW_OP_piece 0x93
-#define DW_OP_deref_size 0x94
-#define DW_OP_xderef_size 0x95
-#define DW_OP_nop 0x96
-#define DW_OP_push_object_address 0x97
-#define DW_OP_call2 0x98
-#define DW_OP_call4 0x99
-#define DW_OP_call_ref 0x9a
-#define DW_OP_form_tls_address 0x9b
-#define DW_OP_call_frame_cfa 0x9c
-#define DW_OP_bit_piece 0x9d
-#define DW_OP_lo_user 0xe0
-#define DW_OP_hi_user 0xff
-
-/*
- * Addresses used in FDE entries in the .eh_frame section may be encoded
- * using one of the following encodings.
- */
-#define DW_EH_PE_absptr 0x00
-#define DW_EH_PE_omit 0xff
-#define DW_EH_PE_uleb128 0x01
-#define DW_EH_PE_udata2 0x02
-#define DW_EH_PE_udata4 0x03
-#define DW_EH_PE_udata8 0x04
-#define DW_EH_PE_sleb128 0x09
-#define DW_EH_PE_sdata2 0x0a
-#define DW_EH_PE_sdata4 0x0b
-#define DW_EH_PE_sdata8 0x0c
-#define DW_EH_PE_signed 0x09
-
-#define DW_EH_PE_pcrel 0x10
-
-/*
- * The architecture-specific register number that contains the return
- * address in the .debug_frame table.
- */
-#define DWARF_ARCH_RA_REG 17
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <linux/bug.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-/*
- * Read either the frame pointer (r14) or the stack pointer (r15).
- * NOTE: this MUST be inlined.
- */
-static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
-{
- unsigned long value = 0;
-
- switch (reg) {
- case 14:
- __asm__ __volatile__("mov r14, %0\n" : "=r" (value));
- break;
- case 15:
- __asm__ __volatile__("mov r15, %0\n" : "=r" (value));
- break;
- default:
- BUG();
- }
-
- return value;
-}
-
-/**
- * dwarf_cie - Common Information Entry
- */
-struct dwarf_cie {
- unsigned long length;
- unsigned long cie_id;
- unsigned char version;
- const char *augmentation;
- unsigned int code_alignment_factor;
- int data_alignment_factor;
-
- /* Which column in the rule table represents return addr of func. */
- unsigned int return_address_reg;
-
- unsigned char *initial_instructions;
- unsigned char *instructions_end;
-
- unsigned char encoding;
-
- unsigned long cie_pointer;
-
- unsigned long flags;
-#define DWARF_CIE_Z_AUGMENTATION (1 << 0)
-
- /* linked-list entry if this CIE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_fde - Frame Description Entry
- */
-struct dwarf_fde {
- unsigned long length;
- unsigned long cie_pointer;
- struct dwarf_cie *cie;
- unsigned long initial_location;
- unsigned long address_range;
- unsigned char *instructions;
- unsigned char *end;
-
- /* linked-list entry if this FDE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_frame - DWARF information for a frame in the call stack
- */
-struct dwarf_frame {
- struct dwarf_frame *prev, *next;
-
- unsigned long pc;
-
- struct list_head reg_list;
-
- unsigned long cfa;
-
- /* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
- unsigned int cfa_register;
- unsigned int cfa_offset;
-
- /* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
- unsigned char *cfa_expr;
- unsigned int cfa_expr_len;
-
- unsigned long flags;
-#define DWARF_FRAME_CFA_REG_OFFSET (1 << 0)
-#define DWARF_FRAME_CFA_REG_EXP (1 << 1)
-
- unsigned long return_addr;
-};
-
-/**
- * dwarf_reg - DWARF register
- * @flags: Describes how to calculate the value of this register
- */
-struct dwarf_reg {
- struct list_head link;
-
- unsigned int number;
-
- unsigned long addr;
- unsigned long flags;
-#define DWARF_REG_OFFSET (1 << 0)
-#define DWARF_VAL_OFFSET (1 << 1)
-#define DWARF_UNDEFINED (1 << 2)
-};
-
-/*
- * Call Frame instruction opcodes.
- */
-#define DW_CFA_advance_loc 0x40
-#define DW_CFA_offset 0x80
-#define DW_CFA_restore 0xc0
-#define DW_CFA_nop 0x00
-#define DW_CFA_set_loc 0x01
-#define DW_CFA_advance_loc1 0x02
-#define DW_CFA_advance_loc2 0x03
-#define DW_CFA_advance_loc4 0x04
-#define DW_CFA_offset_extended 0x05
-#define DW_CFA_restore_extended 0x06
-#define DW_CFA_undefined 0x07
-#define DW_CFA_same_value 0x08
-#define DW_CFA_register 0x09
-#define DW_CFA_remember_state 0x0a
-#define DW_CFA_restore_state 0x0b
-#define DW_CFA_def_cfa 0x0c
-#define DW_CFA_def_cfa_register 0x0d
-#define DW_CFA_def_cfa_offset 0x0e
-#define DW_CFA_def_cfa_expression 0x0f
-#define DW_CFA_expression 0x10
-#define DW_CFA_offset_extended_sf 0x11
-#define DW_CFA_def_cfa_sf 0x12
-#define DW_CFA_def_cfa_offset_sf 0x13
-#define DW_CFA_val_offset 0x14
-#define DW_CFA_val_offset_sf 0x15
-#define DW_CFA_val_expression 0x16
-#define DW_CFA_lo_user 0x1c
-#define DW_CFA_hi_user 0x3f
-
-/* GNU extension opcodes */
-#define DW_CFA_GNU_args_size 0x2e
-#define DW_CFA_GNU_negative_offset_extended 0x2f
-
-/*
- * Some call frame instructions encode their operands in the opcode. We
- * need some helper functions to extract both the opcode and operands
- * from an instruction.
- */
-static inline unsigned int DW_CFA_opcode(unsigned long insn)
-{
- return (insn & 0xc0);
-}
-
-static inline unsigned int DW_CFA_operand(unsigned long insn)
-{
- return (insn & 0x3f);
-}
-
-#define DW_EH_FRAME_CIE 0 /* .eh_frame CIE IDs are 0 */
-#define DW_CIE_ID 0xffffffff
-#define DW64_CIE_ID 0xffffffffffffffffULL
-
-/*
- * DWARF FDE/CIE length field values.
- */
-#define DW_EXT_LO 0xfffffff0
-#define DW_EXT_HI 0xffffffff
-#define DW_EXT_DWARF64 DW_EXT_HI
-
-extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
- struct dwarf_frame *);
-extern void dwarf_free_frame(struct dwarf_frame *);
-
-extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
- struct module *);
-extern void module_dwarf_cleanup(struct module *);
-
-#endif /* !__ASSEMBLY__ */
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_REGISTER .cfi_register
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_UNDEFINED .cfi_undefined
-
-#else
-
-/*
- * Use the asm comment character to ignore the rest of the line.
- */
-#define CFI_IGNORE !
-
-#define CFI_STARTPROC CFI_IGNORE
-#define CFI_ENDPROC CFI_IGNORE
-#define CFI_DEF_CFA CFI_IGNORE
-#define CFI_REGISTER CFI_IGNORE
-#define CFI_REL_OFFSET CFI_IGNORE
-#define CFI_UNDEFINED CFI_IGNORE
-
-#ifndef __ASSEMBLY__
-static inline void dwarf_unwinder_init(void)
-{
-}
-
-#define module_dwarf_finalize(hdr, sechdrs, me) (0)
-#define module_dwarf_cleanup(mod) do { } while (0)
-
-#endif
-
-#endif /* CONFIG_DWARF_UNWINDER */
-
-#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
deleted file mode 100644
index 2862d6d1cb64f1..00000000000000
--- a/arch/sh/include/asm/elf.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <linux/utsname.h>
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* ELF header e_flags defines */
-#define EF_SH_PIC 0x100 /* -fpic */
-#define EF_SH_FDPIC 0x8000 /* -mfdpic */
-
-/* SH (particularly SHcompact) relocation types */
-#define R_SH_NONE 0
-#define R_SH_DIR32 1
-#define R_SH_REL32 2
-#define R_SH_DIR8WPN 3
-#define R_SH_IND12W 4
-#define R_SH_DIR8WPL 5
-#define R_SH_DIR8WPZ 6
-#define R_SH_DIR8BP 7
-#define R_SH_DIR8W 8
-#define R_SH_DIR8L 9
-#define R_SH_SWITCH16 25
-#define R_SH_SWITCH32 26
-#define R_SH_USES 27
-#define R_SH_COUNT 28
-#define R_SH_ALIGN 29
-#define R_SH_CODE 30
-#define R_SH_DATA 31
-#define R_SH_LABEL 32
-#define R_SH_SWITCH8 33
-#define R_SH_GNU_VTINHERIT 34
-#define R_SH_GNU_VTENTRY 35
-#define R_SH_TLS_GD_32 144
-#define R_SH_TLS_LD_32 145
-#define R_SH_TLS_LDO_32 146
-#define R_SH_TLS_IE_32 147
-#define R_SH_TLS_LE_32 148
-#define R_SH_TLS_DTPMOD32 149
-#define R_SH_TLS_DTPOFF32 150
-#define R_SH_TLS_TPOFF32 151
-#define R_SH_GOT32 160
-#define R_SH_PLT32 161
-#define R_SH_COPY 162
-#define R_SH_GLOB_DAT 163
-#define R_SH_JMP_SLOT 164
-#define R_SH_RELATIVE 165
-#define R_SH_GOTOFF 166
-#define R_SH_GOTPC 167
-
-/* FDPIC relocs */
-#define R_SH_GOT20 201
-#define R_SH_GOTOFF20 202
-#define R_SH_GOTFUNCDESC 203
-#define R_SH_GOTFUNCDESC20 204
-#define R_SH_GOTOFFFUNCDESC 205
-#define R_SH_GOTOFFFUNCDESC20 206
-#define R_SH_FUNCDESC 207
-#define R_SH_FUNCDESC_VALUE 208
-
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16 246
-#define R_SH_IMM_LOW16_PCREL 247
-#define R_SH_IMM_MEDLOW16 248
-#define R_SH_IMM_MEDLOW16_PCREL 249
-/* Keep this the last entry. */
-#define R_SH_NUM 256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA ELFDATA2LSB
-#else
-#define ELF_DATA ELFDATA2MSB
-#endif
-#define ELF_ARCH EM_SH
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_SH)
-#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC)
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC)
-
-/*
- * Enable dump using regset.
- * This covers all of general/DSP/FPU regs.
- */
-#define CORE_DUMP_USE_REGSET
-
-#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC
-#define ELF_EXEC_PAGESIZE PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (utsname()->machine)
-
-#define ELF_PLAT_INIT(_r, load_addr) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \
- _dynamic_addr) \
-do { \
- _r->regs[0] = 0; \
- _r->regs[1] = 0; \
- _r->regs[2] = 0; \
- _r->regs[3] = 0; \
- _r->regs[4] = 0; \
- _r->regs[5] = 0; \
- _r->regs[6] = 0; \
- _r->regs[7] = 0; \
- _r->regs[8] = _exec_map_addr; \
- _r->regs[9] = _interp_map_addr; \
- _r->regs[10] = _dynamic_addr; \
- _r->regs[11] = 0; \
- _r->regs[12] = 0; \
- _r->regs[13] = 0; \
- _r->regs[14] = 0; \
- _r->sr = SR_FD; \
-} while (0)
-
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int uses_interp);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE ((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT \
- if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
- else \
- NEW_AUX_ENT(AT_IGNORE, 0)
-#else
-#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO \
-do { \
- /* Optional FPU initialization */ \
- FPU_AUX_ENT; \
- \
- /* Optional vsyscall entry */ \
- VSYSCALL_AUX_ENT; \
- \
- /* Cache desc */ \
- NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \
- NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \
- NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \
-} while (0)
-
-#endif /* __ASM_SH_ELF_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
deleted file mode 100644
index 5ce142d8c5a89e..00000000000000
--- a/arch/sh/include/asm/entry-macros.S
+++ /dev/null
@@ -1,123 +0,0 @@
-! SPDX-License-Identifier: GPL-2.0
-! entry.S macro define
-
- .macro cli
- stc sr, r0
- or #0xf0, r0
- ldc r0, sr
- .endm
-
- .macro sti
- mov #0xfffffff0, r11
- extu.b r11, r11
- not r11, r11
- stc sr, r10
- and r11, r10
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc k_g_imask, r11
- or r11, r10
-#endif
- ldc r10, sr
- .endm
-
- .macro get_current_thread_info, ti, tmp
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc r7_bank, \ti
-#else
- mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
- shll8 \tmp
- shll2 \tmp
- mov r15, \ti
- and \tmp, \ti
-#endif
- .endm
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-
- .macro TRACE_IRQS_ON
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_on
-7835:
- .endm
- .macro TRACE_IRQS_OFF
-
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_off
-7835:
- .endm
-
-#else
- .macro TRACE_IRQS_ON
- .endm
-
- .macro TRACE_IRQS_OFF
- .endm
-#endif
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-# define PREF(x) pref @x
-#else
-# define PREF(x) nop
-#endif
-
- /*
- * Macro for use within assembly. Because the DWARF unwinder
- * needs to use the frame register to unwind the stack, we
- * need to setup r14 with the value of the stack pointer as
- * the return address is usually on the stack somewhere.
- */
- .macro setup_frame_reg
-#ifdef CONFIG_DWARF_UNWINDER
- mov r15, r14
-#endif
- .endm
diff --git a/arch/sh/include/asm/extable.h b/arch/sh/include/asm/extable.h
deleted file mode 100644
index 5658d2bae37242..00000000000000
--- a/arch/sh/include/asm/extable.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_EXTABLE_H
-#define __ASM_SH_EXTABLE_H
-
-#include <asm-generic/extable.h>
-
-#endif
diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h
deleted file mode 100644
index 9a0bca2686fd3d..00000000000000
--- a/arch/sh/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
deleted file mode 100644
index b07fbc7f7bc6ac..00000000000000
--- a/arch/sh/include/asm/fixmap.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * fixmap.h: compile-time virtual memory allocation
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of P3 backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanizm,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
- /*
- * The FIX_CMAP entries are used by kmap_coherent() to get virtual
- * addresses which are of a known color, and so their values are
- * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
- * which is the same color as a page (n<<PAGE_SHIFT).
- */
-#define FIX_N_COLOURS 8
- FIX_CMAP_BEGIN,
- FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
-
-#ifdef CONFIG_IOREMAP_FIXED
- /*
- * FIX_IOREMAP entries are useful for mapping physical address
- * space before ioremap() is useable, e.g. really early in boot
- * before kmalloc() is working.
- */
-#define FIX_N_IOREMAPS 32
- FIX_IOREMAP_BEGIN,
- FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
-#endif
-
- __end_of_fixed_addresses
-};
-
-extern void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
-extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
-
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap, and leave one page empty
- * at the top of mem..
- */
-#define FIXADDR_TOP (P4SEG - PAGE_SIZE)
-#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
-
-#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NOCACHE
-
-#include <asm-generic/fixmap.h>
-
-#endif
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
deleted file mode 100644
index fee4f25555cb53..00000000000000
--- a/arch/sh/include/asm/flat.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FLAT_H
-#define __ASM_SH_FLAT_H
-
-#include <asm/unaligned.h>
-
-static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
- u32 *addr)
-{
- *addr = get_unaligned((__force u32 *)rp);
- return 0;
-}
-static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
-{
- put_unaligned(addr, (__force u32 *)rp);
- return 0;
-}
-
-#define FLAT_PLAT_INIT(_r) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#endif /* __ASM_SH_FLAT_H */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
deleted file mode 100644
index 04584be8986c41..00000000000000
--- a/arch/sh/include/asm/fpu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FPU_H
-#define __ASM_SH_FPU_H
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-
-struct task_struct;
-
-#ifdef CONFIG_SH_FPU
-static inline void release_fpu(struct pt_regs *regs)
-{
- regs->sr |= SR_FD;
-}
-
-static inline void grab_fpu(struct pt_regs *regs)
-{
- regs->sr &= ~SR_FD;
-}
-
-extern void save_fpu(struct task_struct *__tsk);
-extern void restore_fpu(struct task_struct *__tsk);
-extern void fpu_state_restore(struct pt_regs *regs);
-extern void __fpu_state_restore(void);
-#else
-#define save_fpu(tsk) do { } while (0)
-#define restore_fpu(tsk) do { } while (0)
-#define release_fpu(regs) do { } while (0)
-#define grab_fpu(regs) do { } while (0)
-#define fpu_state_restore(regs) do { } while (0)
-#define __fpu_state_restore(regs) do { } while (0)
-#endif
-
-struct user_regset;
-
-extern int do_fpu_inst(unsigned short, struct pt_regs *);
-extern int init_fpu(struct task_struct *);
-
-static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- save_fpu(tsk);
- release_fpu(regs);
- } else
- tsk->thread.fpu_counter = 0;
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- __unlazy_fpu(tsk, regs);
- preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- release_fpu(regs);
- }
- preempt_enable();
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
deleted file mode 100644
index 87c23621b7ae81..00000000000000
--- a/arch/sh/include/asm/freq.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-
-#include <cpu/freq.h>
-
-#endif /* __ASM_SH_FREQ_H */
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
deleted file mode 100644
index b1c1dc0cc261d1..00000000000000
--- a/arch/sh/include/asm/ftrace.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FTRACE_H
-#define __ASM_SH_FTRACE_H
-
-#ifdef CONFIG_FUNCTION_TRACER
-
-#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
-#define FTRACE_SYSCALL_MAX NR_syscalls
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-
-#define MCOUNT_ADDR ((unsigned long)(mcount))
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#define CALL_ADDR ((long)(ftrace_call))
-#define STUB_ADDR ((long)(ftrace_stub))
-#define GRAPH_ADDR ((long)(ftrace_graph_call))
-#define CALLER_ADDR ((long)(ftrace_caller))
-
-#define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALL_ADDR) - 4)
-#define GRAPH_INSN_OFFSET ((CALLER_ADDR - GRAPH_ADDR) - 4)
-
-struct dyn_arch_ftrace {
- /* No extra data needed on sh */
-};
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
- /* 'addr' is the memory table address. */
- return addr;
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifndef __ASSEMBLY__
-
-/* arch/sh/kernel/return_address.c */
-extern void *return_address(unsigned int);
-
-#define ftrace_return_address(n) return_address(n)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/futex-cas.h b/arch/sh/include/asm/futex-cas.h
deleted file mode 100644
index ed738e32b5ec45..00000000000000
--- a/arch/sh/include/asm/futex-cas.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_CAS_H
-#define __ASM_SH_FUTEX_CAS_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "1:\n\t"
- "cas.l %2, %1, @r0\n"
- "2:\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "+r" (newval)
- :"r" (oldval), "i" (-EFAULT), "z" (uaddr)
- :"t", "memory");
- if (err) return err;
- *uval = newval;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_CAS_H */
diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h
deleted file mode 100644
index 9bc053242ea037..00000000000000
--- a/arch/sh/include/asm/futex-irq.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_IRQ_H
-#define __ASM_SH_FUTEX_IRQ_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- unsigned long flags;
- int ret;
- u32 prev = 0;
-
- local_irq_save(flags);
-
- ret = get_user(prev, uaddr);
- if (!ret && oldval == prev)
- ret = put_user(newval, uaddr);
-
- local_irq_restore(flags);
-
- *uval = prev;
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/arch/sh/include/asm/futex-llsc.h b/arch/sh/include/asm/futex-llsc.h
deleted file mode 100644
index 6e1570752bc1e9..00000000000000
--- a/arch/sh/include/asm/futex-llsc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_LLSC_H
-#define __ASM_SH_FUTEX_LLSC_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "synco\n"
- "1:\n\t"
- "movli.l @%2, r0\n\t"
- "mov r0, %1\n\t"
- "cmp/eq %1, %4\n\t"
- "bf 2f\n\t"
- "mov %5, r0\n\t"
- "movco.l r0, @%2\n\t"
- "bf 1b\n"
- "2:\n\t"
- "synco\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "=&r" (*uval)
- :"r" (uaddr), "i" (-EFAULT), "r" (oldval), "r" (newval)
- :"t", "memory", "r0");
- if (err) return err;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_LLSC_H */
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
deleted file mode 100644
index b70f3fce6ed77a..00000000000000
--- a/arch/sh/include/asm/futex.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_H
-#define __ASM_SH_FUTEX_H
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-#if !defined(CONFIG_SMP)
-#include <asm/futex-irq.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/futex-cas.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/futex-llsc.h>
-#else
-#error SMP not supported on this configuration.
-#endif
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- if (!access_ok(uaddr, sizeof(u32)))
- return -EFAULT;
-
- return atomic_futex_op_cmpxchg_inatomic(uval, uaddr, oldval, newval);
-}
-
-static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
- u32 __user *uaddr)
-{
- u32 oldval, newval, prev;
- int ret;
-
- do {
- ret = get_user(oldval, uaddr);
-
- if (ret) break;
-
- switch (op) {
- case FUTEX_OP_SET:
- newval = oparg;
- break;
- case FUTEX_OP_ADD:
- newval = oldval + oparg;
- break;
- case FUTEX_OP_OR:
- newval = oldval | oparg;
- break;
- case FUTEX_OP_ANDN:
- newval = oldval & ~oparg;
- break;
- case FUTEX_OP_XOR:
- newval = oldval ^ oparg;
- break;
- default:
- ret = -ENOSYS;
- break;
- }
-
- if (ret) break;
-
- ret = futex_atomic_cmpxchg_inatomic(&prev, uaddr, oldval, newval);
- } while (!ret && prev != oldval);
-
- if (!ret)
- *oval = oldval;
-
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index d643250f0a0fa0..00000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
deleted file mode 100644
index 9fe4495a8e90b3..00000000000000
--- a/arch/sh/include/asm/hardirq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HARDIRQ_H
-#define __ASM_SH_HARDIRQ_H
-
-extern void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-#define ARCH_WANTS_NMI_IRQSTAT
-
-#include <asm-generic/hardirq.h>
-
-#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
deleted file mode 100644
index afb24cb034b114..00000000000000
--- a/arch/sh/include/asm/hd64461.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HD64461
-#define __ASM_SH_HD64461
-/*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2000 YAEGASHI Takeshi
- *
- * Hitachi HD64461 companion chip support
- * (please note manual reference 0x10000000 = 0xb0000000)
- */
-
-/* Constants for PCMCIA mappings */
-#define HD64461_PCC_WINDOW 0x01000000
-
-/* Area 6 - Slot 0 - memory and/or IO card */
-#define HD64461_IOBASE 0xb0000000
-#define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x))
-#define HD64461_PCC0_BASE HD64461_IO_OFFSET(0x8000000)
-#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */
-#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */
-#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */
-
-/* Area 5 - Slot 1 - memory card only */
-#define HD64461_PCC1_BASE HD64461_IO_OFFSET(0x4000000)
-#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */
-#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */
-
-/* Standby Control Register for HD64461 */
-#define HD64461_STBCR HD64461_IO_OFFSET(0x00000000)
-#define HD64461_STBCR_CKIO_STBY 0x2000
-#define HD64461_STBCR_SAFECKE_IST 0x1000
-#define HD64461_STBCR_SLCKE_IST 0x0800
-#define HD64461_STBCR_SAFECKE_OST 0x0400
-#define HD64461_STBCR_SLCKE_OST 0x0200
-#define HD64461_STBCR_SMIAST 0x0100
-#define HD64461_STBCR_SLCDST 0x0080
-#define HD64461_STBCR_SPC0ST 0x0040
-#define HD64461_STBCR_SPC1ST 0x0020
-#define HD64461_STBCR_SAFEST 0x0010
-#define HD64461_STBCR_STM0ST 0x0008
-#define HD64461_STBCR_STM1ST 0x0004
-#define HD64461_STBCR_SIRST 0x0002
-#define HD64461_STBCR_SURTST 0x0001
-
-/* System Configuration Register */
-#define HD64461_SYSCR HD64461_IO_OFFSET(0x02)
-
-/* CPU Data Bus Control Register */
-#define HD64461_SCPUCR HD64461_IO_OFFSET(0x04)
-
-/* Base Address Register */
-#define HD64461_LCDCBAR HD64461_IO_OFFSET(0x1000)
-
-/* Line increment address */
-#define HD64461_LCDCLOR HD64461_IO_OFFSET(0x1002)
-
-/* Controls LCD controller */
-#define HD64461_LCDCCR HD64461_IO_OFFSET(0x1004)
-
-/* LCCDR control bits */
-#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */
-#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */
-#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */
-#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */
-#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */
-#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */
-
-/* Controls LCD (1) */
-#define HD64461_LDR1 HD64461_IO_OFFSET(0x1010)
-#define HD64461_LDR1_DON 0x01 /* Display On */
-#define HD64461_LDR1_DINV 0x80 /* Display Invert */
-
-/* Controls LCD (2) */
-#define HD64461_LDR2 HD64461_IO_OFFSET(0x1012)
-#define HD64461_LDHNCR HD64461_IO_OFFSET(0x1014) /* Number of horizontal characters */
-#define HD64461_LDHNSR HD64461_IO_OFFSET(0x1016) /* Specify output start position + width of CL1 */
-#define HD64461_LDVNTR HD64461_IO_OFFSET(0x1018) /* Specify total vertical lines */
-#define HD64461_LDVNDR HD64461_IO_OFFSET(0x101a) /* specify number of display vertical lines */
-#define HD64461_LDVSPR HD64461_IO_OFFSET(0x101c) /* specify vertical synchronization pos and AC nr */
-
-/* Controls LCD (3) */
-#define HD64461_LDR3 HD64461_IO_OFFSET(0x101e)
-
-/* Palette Registers */
-#define HD64461_CPTWAR HD64461_IO_OFFSET(0x1030) /* Color Palette Write Address Register */
-#define HD64461_CPTWDR HD64461_IO_OFFSET(0x1032) /* Color Palette Write Data Register */
-#define HD64461_CPTRAR HD64461_IO_OFFSET(0x1034) /* Color Palette Read Address Register */
-#define HD64461_CPTRDR HD64461_IO_OFFSET(0x1036) /* Color Palette Read Data Register */
-
-#define HD64461_GRDOR HD64461_IO_OFFSET(0x1040) /* Display Resolution Offset Register */
-#define HD64461_GRSCR HD64461_IO_OFFSET(0x1042) /* Solid Color Register */
-#define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */
-
-#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */
-#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */
-#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */
-#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */
-#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */
-#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */
-
-/* Line Drawing Registers */
-#define HD64461_LNSARH HD64461_IO_OFFSET(0x1046) /* Line Start Address Register (H) */
-#define HD64461_LNSARL HD64461_IO_OFFSET(0x1048) /* Line Start Address Register (L) */
-#define HD64461_LNAXLR HD64461_IO_OFFSET(0x104a) /* Axis Pixel Length Register */
-#define HD64461_LNDGR HD64461_IO_OFFSET(0x104c) /* Diagonal Register */
-#define HD64461_LNAXR HD64461_IO_OFFSET(0x104e) /* Axial Register */
-#define HD64461_LNERTR HD64461_IO_OFFSET(0x1050) /* Start Error Term Register */
-#define HD64461_LNMDR HD64461_IO_OFFSET(0x1052) /* Line Mode Register */
-
-/* BitBLT Registers */
-#define HD64461_BBTSSARH HD64461_IO_OFFSET(0x1054) /* Source Start Address Register (H) */
-#define HD64461_BBTSSARL HD64461_IO_OFFSET(0x1056) /* Source Start Address Register (L) */
-#define HD64461_BBTDSARH HD64461_IO_OFFSET(0x1058) /* Destination Start Address Register (H) */
-#define HD64461_BBTDSARL HD64461_IO_OFFSET(0x105a) /* Destination Start Address Register (L) */
-#define HD64461_BBTDWR HD64461_IO_OFFSET(0x105c) /* Destination Block Width Register */
-#define HD64461_BBTDHR HD64461_IO_OFFSET(0x105e) /* Destination Block Height Register */
-#define HD64461_BBTPARH HD64461_IO_OFFSET(0x1060) /* Pattern Start Address Register (H) */
-#define HD64461_BBTPARL HD64461_IO_OFFSET(0x1062) /* Pattern Start Address Register (L) */
-#define HD64461_BBTMARH HD64461_IO_OFFSET(0x1064) /* Mask Start Address Register (H) */
-#define HD64461_BBTMARL HD64461_IO_OFFSET(0x1066) /* Mask Start Address Register (L) */
-#define HD64461_BBTROPR HD64461_IO_OFFSET(0x1068) /* ROP Register */
-#define HD64461_BBTMDR HD64461_IO_OFFSET(0x106a) /* BitBLT Mode Register */
-
-/* PC Card Controller Registers */
-/* Maps to Physical Area 6 */
-#define HD64461_PCC0ISR HD64461_IO_OFFSET(0x2000) /* socket 0 interface status */
-#define HD64461_PCC0GCR HD64461_IO_OFFSET(0x2002) /* socket 0 general control */
-#define HD64461_PCC0CSCR HD64461_IO_OFFSET(0x2004) /* socket 0 card status change */
-#define HD64461_PCC0CSCIER HD64461_IO_OFFSET(0x2006) /* socket 0 card status change interrupt enable */
-#define HD64461_PCC0SCR HD64461_IO_OFFSET(0x2008) /* socket 0 software control */
-/* Maps to Physical Area 5 */
-#define HD64461_PCC1ISR HD64461_IO_OFFSET(0x2010) /* socket 1 interface status */
-#define HD64461_PCC1GCR HD64461_IO_OFFSET(0x2012) /* socket 1 general control */
-#define HD64461_PCC1CSCR HD64461_IO_OFFSET(0x2014) /* socket 1 card status change */
-#define HD64461_PCC1CSCIER HD64461_IO_OFFSET(0x2016) /* socket 1 card status change interrupt enable */
-#define HD64461_PCC1SCR HD64461_IO_OFFSET(0x2018) /* socket 1 software control */
-
-/* PCC Interface Status Register */
-#define HD64461_PCCISR_READY 0x80 /* card ready */
-#define HD64461_PCCISR_MWP 0x40 /* card write-protected */
-#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */
-#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */
-#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */
-#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */
-#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */
-#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */
-
-#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */
-#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */
-#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */
-#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */
-#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */
-#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */
-
-/* PCC General Control Register */
-#define HD64461_PCCGCR_DRVE 0x80 /* output drive */
-#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */
-#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
-#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */
-#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */
-#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */
-#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */
-#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */
-
-/* PCC Card Status Change Register */
-#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */
-#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */
-#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */
-#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */
-#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */
-#define HD64461_PCCCSCR_RC 0x04 /* READY change */
-#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */
-#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */
-
-/* PCC Card Status Change Interrupt Enable Register */
-#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */
-#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */
-#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */
-#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */
-#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */
-#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */
-
-#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */
-#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */
-#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */
-#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */
-#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/
-
-/* PCC Software Control Register */
-#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */
-#define HD64461_PCCSCR_SWP 0x01 /* write protect */
-
-/* PCC0 Output Pins Control Register */
-#define HD64461_P0OCR HD64461_IO_OFFSET(0x202a)
-
-/* PCC1 Output Pins Control Register */
-#define HD64461_P1OCR HD64461_IO_OFFSET(0x202c)
-
-/* PC Card General Control Register */
-#define HD64461_PGCR HD64461_IO_OFFSET(0x202e)
-
-/* Port Control Registers */
-#define HD64461_GPACR HD64461_IO_OFFSET(0x4000) /* Port A - Handles IRDA/TIMER */
-#define HD64461_GPBCR HD64461_IO_OFFSET(0x4002) /* Port B - Handles UART */
-#define HD64461_GPCCR HD64461_IO_OFFSET(0x4004) /* Port C - Handles PCMCIA 1 */
-#define HD64461_GPDCR HD64461_IO_OFFSET(0x4006) /* Port D - Handles PCMCIA 1 */
-
-/* Port Control Data Registers */
-#define HD64461_GPADR HD64461_IO_OFFSET(0x4010) /* A */
-#define HD64461_GPBDR HD64461_IO_OFFSET(0x4012) /* B */
-#define HD64461_GPCDR HD64461_IO_OFFSET(0x4014) /* C */
-#define HD64461_GPDDR HD64461_IO_OFFSET(0x4016) /* D */
-
-/* Interrupt Control Registers */
-#define HD64461_GPAICR HD64461_IO_OFFSET(0x4020) /* A */
-#define HD64461_GPBICR HD64461_IO_OFFSET(0x4022) /* B */
-#define HD64461_GPCICR HD64461_IO_OFFSET(0x4024) /* C */
-#define HD64461_GPDICR HD64461_IO_OFFSET(0x4026) /* D */
-
-/* Interrupt Status Registers */
-#define HD64461_GPAISR HD64461_IO_OFFSET(0x4040) /* A */
-#define HD64461_GPBISR HD64461_IO_OFFSET(0x4042) /* B */
-#define HD64461_GPCISR HD64461_IO_OFFSET(0x4044) /* C */
-#define HD64461_GPDISR HD64461_IO_OFFSET(0x4046) /* D */
-
-/* Interrupt Request Register & Interrupt Mask Register */
-#define HD64461_NIRR HD64461_IO_OFFSET(0x5000)
-#define HD64461_NIMR HD64461_IO_OFFSET(0x5002)
-
-#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
-#define OFFCHIP_IRQ_BASE 64
-#define HD64461_IRQ_NUM 16
-
-#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
-#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6)
-#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9)
-#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10)
-#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11)
-#define HD64461_IRQ_AFE (HD64461_IRQBASE+12)
-#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13)
-#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14)
-
-#define __IO_PREFIX hd64461
-#include <asm/io_generic.h>
-
-/* arch/sh/cchips/hd6446x/hd64461/setup.c */
-void hd64461_register_irq_demux(int irq,
- int (*demux) (int irq, void *dev), void *dev);
-void hd64461_unregister_irq_demux(int irq);
-
-#endif
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
deleted file mode 100644
index 4028ca4058d171..00000000000000
--- a/arch/sh/include/asm/heartbeat.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HEARTBEAT_H
-#define __ASM_SH_HEARTBEAT_H
-
-#include <linux/timer.h>
-
-#define HEARTBEAT_INVERTED (1 << 0)
-
-struct heartbeat_data {
- void __iomem *base;
- unsigned char *bit_pos;
- unsigned int nr_bits;
- struct timer_list timer;
- unsigned int regsize;
- unsigned int mask;
- unsigned long flags;
-};
-
-#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h
deleted file mode 100644
index 4d3ba39e681c4f..00000000000000
--- a/arch/sh/include/asm/hugetlb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_HUGETLB_H
-#define _ASM_SH_HUGETLB_H
-
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-#define __HAVE_ARCH_PREPARE_HUGEPAGE_RANGE
-static inline int prepare_hugepage_range(struct file *file,
- unsigned long addr, unsigned long len)
-{
- if (len & ~HPAGE_MASK)
- return -EINVAL;
- if (addr & ~HPAGE_MASK)
- return -EINVAL;
- return 0;
-}
-
-#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH
-static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
-{
- return *ptep;
-}
-
-static inline void arch_clear_hugepage_flags(struct page *page)
-{
- clear_bit(PG_dcache_clean, &page->flags);
-}
-#define arch_clear_hugepage_flags arch_clear_hugepage_flags
-
-#include <asm-generic/hugetlb.h>
-
-#endif /* _ASM_SH_HUGETLB_H */
diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h
deleted file mode 100644
index 361a0f57bdebda..00000000000000
--- a/arch/sh/include/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_BREAKPOINT_H
-#define __ASM_SH_HW_BREAKPOINT_H
-
-#include <uapi/asm/hw_breakpoint.h>
-
-#define __ARCH_HW_BREAKPOINT_H
-
-#include <linux/kdebug.h>
-#include <linux/types.h>
-
-struct arch_hw_breakpoint {
- unsigned long address;
- u16 len;
- u16 type;
-};
-
-enum {
- SH_BREAKPOINT_READ = (1 << 1),
- SH_BREAKPOINT_WRITE = (1 << 2),
- SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
-
- SH_BREAKPOINT_LEN_1 = (1 << 12),
- SH_BREAKPOINT_LEN_2 = (1 << 13),
- SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
- SH_BREAKPOINT_LEN_8 = (1 << 14),
-};
-
-struct sh_ubc {
- const char *name;
- unsigned int num_events;
- unsigned int trap_nr;
- void (*enable)(struct arch_hw_breakpoint *, int);
- void (*disable)(struct arch_hw_breakpoint *, int);
- void (*enable_all)(unsigned long);
- void (*disable_all)(void);
- unsigned long (*active_mask)(void);
- unsigned long (*triggered_mask)(void);
- void (*clear_triggered_mask)(unsigned long);
- struct clk *clk; /* optional interface clock / MSTP bit */
-};
-
-struct perf_event_attr;
-struct perf_event;
-struct task_struct;
-struct pmu;
-
-/* Maximum number of UBC channels */
-#define HBP_NUM 2
-
-#define hw_breakpoint_slots(type) (HBP_NUM)
-
-/* arch/sh/kernel/hw_breakpoint.c */
-extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data);
-
-int arch_install_hw_breakpoint(struct perf_event *bp);
-void arch_uninstall_hw_breakpoint(struct perf_event *bp);
-void hw_breakpoint_pmu_read(struct perf_event *bp);
-
-extern void arch_fill_perf_breakpoint(struct perf_event *bp);
-extern int register_sh_ubc(struct sh_ubc *);
-
-extern struct pmu perf_ops_bp;
-
-#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
deleted file mode 100644
index ce23e3332f9c97..00000000000000
--- a/arch/sh/include/asm/hw_irq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <linux/sh_intc.h>
-#include <linux/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
- unsigned char irq;
- unsigned char ipr_idx; /* Index for the IPR registered */
- unsigned char shift; /* Number of bits to shift the data */
- unsigned char priority; /* The priority */
-};
-
-struct ipr_desc {
- unsigned long *ipr_offsets;
- unsigned int nr_offsets;
- struct ipr_data *ipr_data;
- unsigned int nr_irqs;
- struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-void __init plat_irq_setup(void);
-void __init plat_irq_setup_sh3(void);
-void __init plat_irq_setup_pins(int mode);
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
- IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
- IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
deleted file mode 100644
index a777f1410a6e98..00000000000000
--- a/arch/sh/include/asm/i2c-sh7760.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * MMIO/IRQ and platform data for SH7760 I2C channels
- */
-
-#ifndef _I2C_SH7760_H_
-#define _I2C_SH7760_H_
-
-#define SH7760_I2C_DEVNAME "sh7760-i2c"
-
-#define SH7760_I2C0_MMIO 0xFE140000
-#define SH7760_I2C0_MMIOEND 0xFE14003B
-
-#define SH7760_I2C1_MMIO 0xFE150000
-#define SH7760_I2C1_MMIOEND 0xFE15003B
-
-struct sh7760_i2c_platdata {
- unsigned int speed_khz;
-};
-
-#endif
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
deleted file mode 100644
index fba90e670ed41d..00000000000000
--- a/arch/sh/include/asm/io.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_H
-#define __ASM_SH_IO_H
-
-/*
- * Convention:
- * read{b,w,l,q}/write{b,w,l,q} are for PCI,
- * while in{b,w,l}/out{b,w,l} are for ISA
- *
- * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
- * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- *
- * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
- * automatically, there are also __raw versions, which do not.
- */
-#include <linux/errno.h>
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <linux/pgtable.h>
-#include <asm-generic/iomap.h>
-
-#define __IO_PREFIX generic
-#include <asm/io_generic.h>
-#include <asm-generic/pci_iomap.h>
-#include <mach/mangle-port.h>
-
-#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v))
-#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
-#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
-#define __raw_writeq(v,a) (__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
-
-#define __raw_readb(a) (__chk_io_ptr(a), *(volatile u8 __force *)(a))
-#define __raw_readw(a) (__chk_io_ptr(a), *(volatile u16 __force *)(a))
-#define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a))
-#define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a))
-
-#define readb_relaxed(c) ({ u8 __v = ioswabb(__raw_readb(c)); __v; })
-#define readw_relaxed(c) ({ u16 __v = ioswabw(__raw_readw(c)); __v; })
-#define readl_relaxed(c) ({ u32 __v = ioswabl(__raw_readl(c)); __v; })
-#define readq_relaxed(c) ({ u64 __v = ioswabq(__raw_readq(c)); __v; })
-
-#define writeb_relaxed(v,c) ((void)__raw_writeb((__force u8)ioswabb(v),c))
-#define writew_relaxed(v,c) ((void)__raw_writew((__force u16)ioswabw(v),c))
-#define writel_relaxed(v,c) ((void)__raw_writel((__force u32)ioswabl(v),c))
-#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64)ioswabq(v),c))
-
-#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; })
-#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; })
-#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; })
-#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; })
-
-#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); })
-#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); })
-#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); })
-#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); })
-
-#define readsb(p,d,l) __raw_readsb(p,d,l)
-#define readsw(p,d,l) __raw_readsw(p,d,l)
-#define readsl(p,d,l) __raw_readsl(p,d,l)
-
-#define writesb(p,d,l) __raw_writesb(p,d,l)
-#define writesw(p,d,l) __raw_writesw(p,d,l)
-#define writesl(p,d,l) __raw_writesl(p,d,l)
-
-#define __BUILD_UNCACHED_IO(bwlq, type) \
-static inline type read##bwlq##_uncached(unsigned long addr) \
-{ \
- type ret; \
- jump_to_uncached(); \
- ret = __raw_read##bwlq(addr); \
- back_to_cached(); \
- return ret; \
-} \
- \
-static inline void write##bwlq##_uncached(type v, unsigned long addr) \
-{ \
- jump_to_uncached(); \
- __raw_write##bwlq(v, addr); \
- back_to_cached(); \
-}
-
-__BUILD_UNCACHED_IO(b, u8)
-__BUILD_UNCACHED_IO(w, u16)
-__BUILD_UNCACHED_IO(l, u32)
-__BUILD_UNCACHED_IO(q, u64)
-
-#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \
- \
-static inline void \
-pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
- __addr++; \
- } \
-} \
- \
-static inline void pfx##reads##bwlq(volatile void __iomem *mem, \
- void *addr, unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
- __addr++; \
- } \
-}
-
-__BUILD_MEMORY_STRING(__raw_, b, u8)
-__BUILD_MEMORY_STRING(__raw_, w, u16)
-
-void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-__BUILD_MEMORY_STRING(__raw_, q, u64)
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-
-/*
- * Slowdown I/O port space accesses for antique hardware.
- */
-#undef CONF_SLOWDOWN_IO
-
-/*
- * On SuperH I/O ports are memory mapped, so we access them using normal
- * load/store instructions. sh_io_port_base is the virtual address to
- * which all ports are being mapped.
- */
-extern unsigned long sh_io_port_base;
-
-static inline void __set_io_port_base(unsigned long pbase)
-{
- *(unsigned long *)&sh_io_port_base = pbase;
- barrier();
-}
-
-#ifdef CONFIG_GENERIC_IOMAP
-#define __ioport_map ioport_map
-#else
-extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
-#endif
-
-#ifdef CONF_SLOWDOWN_IO
-#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
-#else
-#define SLOW_DOWN_IO
-#endif
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
- \
-static inline void pfx##out##bwlq##p(type val, unsigned long port) \
-{ \
- volatile type *__addr; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- *__addr = val; \
- slow; \
-} \
- \
-static inline type pfx##in##bwlq##p(unsigned long port) \
-{ \
- volatile type *__addr; \
- type __val; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- __val = *__addr; \
- slow; \
- \
- return __val; \
-}
-
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwlq, type) \
- __BUILD_IOPORT_PFX(, bwlq, type)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-BUILDIO_IOPORT(q, u64)
-
-#define __BUILD_IOPORT_STRING(bwlq, type) \
- \
-static inline void outs##bwlq(unsigned long port, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- out##bwlq(*__addr, port); \
- __addr++; \
- } \
-} \
- \
-static inline void ins##bwlq(unsigned long port, void *addr, \
- unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = in##bwlq(port); \
- __addr++; \
- } \
-}
-
-__BUILD_IOPORT_STRING(b, u8)
-__BUILD_IOPORT_STRING(w, u16)
-__BUILD_IOPORT_STRING(l, u32)
-__BUILD_IOPORT_STRING(q, u64)
-
-#else /* !CONFIG_HAS_IOPORT_MAP */
-
-#include <asm/io_noioport.h>
-
-#endif
-
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* We really want to try and get these to memcpy etc */
-void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
-void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* Quad-word real-mode I/O, don't ask.. */
-unsigned long long peek_real_address_q(unsigned long long addr);
-unsigned long long poke_real_address_q(unsigned long long addr,
- unsigned long long val);
-
-#if !defined(CONFIG_MMU)
-#define virt_to_phys(address) ((unsigned long)(address))
-#define phys_to_virt(address) ((void *)(address))
-#else
-#define virt_to_phys(address) (__pa(address))
-#define phys_to_virt(address) (__va(address))
-#endif
-
-#ifdef CONFIG_MMU
-void iounmap(void __iomem *addr);
-void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
- pgprot_t prot, void *caller);
-
-static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL_NOCACHE,
- __builtin_return_address(0));
-}
-
-static inline void __iomem *
-ioremap_cache(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL,
- __builtin_return_address(0));
-}
-#define ioremap_cache ioremap_cache
-
-#ifdef CONFIG_HAVE_IOREMAP_PROT
-static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
- unsigned long flags)
-{
- return __ioremap_caller(offset, size, __pgprot(flags),
- __builtin_return_address(0));
-}
-#endif /* CONFIG_HAVE_IOREMAP_PROT */
-
-#else /* CONFIG_MMU */
-static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
-{
- return (void __iomem *)(unsigned long)offset;
-}
-
-static inline void iounmap(volatile void __iomem *addr) { }
-#endif /* CONFIG_MMU */
-
-#define ioremap_uc ioremap
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-int valid_phys_addr_range(phys_addr_t addr, size_t size);
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-
-#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
deleted file mode 100644
index 87ec38f4e53291..00000000000000
--- a/arch/sh/include/asm/io_generic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Trivial I/O routine definitions, intentionally meant to be included
- * multiple times. Ugly I/O routine concatenation helpers taken from
- * alpha. Must be included _before_ io.h to avoid preprocessor-induced
- * routine mismatch.
- */
-#define IO_CONCAT(a,b) _IO_CONCAT(a,b)
-#define _IO_CONCAT(a,b) a ## _ ## b
-
-#ifndef __IO_PREFIX
-#error "Don't include this header without a valid system prefix"
-#endif
-
-void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
-void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
-void IO_CONCAT(__IO_PREFIX,mem_init)(void);
-
-#undef __IO_PREFIX
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
deleted file mode 100644
index f7938fe0f91121..00000000000000
--- a/arch/sh/include/asm/io_noioport.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_NOIOPORT_H
-#define __ASM_SH_IO_NOIOPORT_H
-
-static inline u8 inb(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u16 inw(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u32 inl(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline void outb(unsigned char x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outw(unsigned short x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outl(unsigned int x, unsigned long port)
-{
- BUG();
-}
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int size)
-{
- BUG();
- return NULL;
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
- BUG();
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
-
-static inline void insb(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insw(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insl(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsb(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsw(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsl(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-#endif /* __ASM_SH_IO_NOIOPORT_H */
diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h
deleted file mode 100644
index ac01b201d9aa9b..00000000000000
--- a/arch/sh/include/asm/io_trapped.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_TRAPPED_H
-#define __ASM_SH_IO_TRAPPED_H
-
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <asm/page.h>
-
-#define IO_TRAPPED_MAGIC 0xfeedbeef
-
-struct trapped_io {
- unsigned int magic;
- struct resource *resource;
- unsigned int num_resources;
- unsigned int minimum_bus_width;
- struct list_head list;
- void __iomem *virt_base;
-} __aligned(PAGE_SIZE);
-
-#ifdef CONFIG_IO_TRAPPED
-int register_trapped_io(struct trapped_io *tiop);
-int handle_trapped_io(struct pt_regs *regs, unsigned long address);
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size);
-
-#ifdef CONFIG_HAS_IOMEM
-extern struct list_head trapped_mem;
-
-static inline void __iomem *
-__ioremap_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_mem, offset, size);
-}
-#else
-#define __ioremap_trapped(offset, size) NULL
-#endif
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-extern struct list_head trapped_io;
-
-static inline void __iomem *
-__ioport_map_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_io, offset, size);
-}
-#else
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#else
-#define register_trapped_io(tiop) (-1)
-#define handle_trapped_io(tiop, address) 0
-#define __ioremap_trapped(offset, size) NULL
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
deleted file mode 100644
index 1c4923502fd4c1..00000000000000
--- a/arch/sh/include/asm/irq.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <linux/cpumask.h>
-#include <asm/machvec.h>
-
-/*
- * This is a special IRQ number for indicating that no IRQ has been
- * triggered and to simply ignore the IRQ dispatch. This is a special
- * case that can happen with IRQ auto-distribution when multiple CPUs
- * are woken up and signalled in parallel.
- */
-#define NO_IRQ_IGNORE ((unsigned int)-1)
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
- return irq;
-}
-
-#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-
-void init_IRQ(void);
-void migrate_irqs(void);
-
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_INTC_BALANCING
-extern unsigned int irq_lookup(unsigned int irq);
-extern void irq_finish(unsigned int irq);
-#else
-#define irq_lookup(irq) (irq)
-#define irq_finish(irq) do { } while (0)
-#endif
-
-#include <asm-generic/irq.h>
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
deleted file mode 100644
index 25f6cfef3f043a..00000000000000
--- a/arch/sh/include/asm/irqflags.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQFLAGS_H
-#define __ASM_SH_IRQFLAGS_H
-
-#define ARCH_IRQ_DISABLED 0xf0
-#define ARCH_IRQ_ENABLED 0x00
-
-#include <asm-generic/irqflags.h>
-
-#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
deleted file mode 100644
index de8693fabb1d95..00000000000000
--- a/arch/sh/include/asm/kdebug.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KDEBUG_H
-#define __ASM_SH_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
- DIE_TRAP,
- DIE_NMI,
- DIE_OOPS,
- DIE_BREAKPOINT,
- DIE_SSTEP,
-};
-
-/* arch/sh/kernel/dumpstack.c */
-extern void printk_address(unsigned long address, int reliable);
-extern void dump_mem(const char *str, const char *loglvl,
- unsigned long bottom, unsigned long top);
-
-#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
deleted file mode 100644
index 927d80ba2332a7..00000000000000
--- a/arch/sh/include/asm/kexec.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KEXEC_H
-#define __ASM_SH_KEXEC_H
-
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <linux/kernel.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
- * calculation for the amount of memory directly mappable into the
- * kernel memory space.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_PAGE_SIZE 4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_SH
-
-#ifdef CONFIG_KEXEC
-/* arch/sh/kernel/machine_kexec.c */
-void reserve_crashkernel(void);
-
-static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs)
-{
- if (oldregs)
- memcpy(newregs, oldregs, sizeof(*newregs));
- else {
- __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
- __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
- __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
- __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
- __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
- __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
- __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
- __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
- __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
- __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
- __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
- __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
- __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
- __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
- __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
- __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
-
- __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
- __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
- __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
-
- __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
- __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
-
- newregs->pc = _THIS_IP_;
- }
-}
-#else
-static inline void reserve_crashkernel(void) { }
-#endif /* CONFIG_KEXEC */
-
-#endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
deleted file mode 100644
index 0d5b840cb28963..00000000000000
--- a/arch/sh/include/asm/kgdb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KGDB_H
-#define __ASM_SH_KGDB_H
-
-#include <asm/cacheflush.h>
-#include <asm/ptrace.h>
-
-enum regnames {
- GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
- GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
-
- GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
-};
-
-#define _GP_REGS 16
-#define _EXTRA_REGS 7
-#define GDB_SIZEOF_REG sizeof(u32)
-
-#define DBG_MAX_REG_NUM (_GP_REGS + _EXTRA_REGS)
-#define NUMREGBYTES (DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG))
-
-static inline void arch_kgdb_breakpoint(void)
-{
- __asm__ __volatile__ ("trapa #0x3c\n");
-}
-
-#define BREAK_INSTR_SIZE 2
-#define BUFMAX 2048
-
-#ifdef CONFIG_SMP
-# define CACHE_FLUSH_IS_SAFE 0
-#else
-# define CACHE_FLUSH_IS_SAFE 1
-#endif
-
-#define GDB_ADJUSTS_BREAK_OFFSET
-
-#endif /* __ASM_SH_KGDB_H */
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
deleted file mode 100644
index eeba83e0a7d294..00000000000000
--- a/arch/sh/include/asm/kprobes.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KPROBES_H
-#define __ASM_SH_KPROBES_H
-
-#include <asm-generic/kprobes.h>
-
-#define BREAKPOINT_INSTRUCTION 0xc33a
-
-#ifdef CONFIG_KPROBES
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-typedef insn_size_t kprobe_opcode_t;
-
-#define MAX_INSN_SIZE 16
-#define MAX_STACK_SIZE 64
-#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
- (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
- ? (MAX_STACK_SIZE) \
- : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-
-#define flush_insn_slot(p) do { } while (0)
-#define kretprobe_blacklist_size 0
-
-struct kprobe;
-
-void arch_remove_kprobe(struct kprobe *);
-void __kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
- /* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-struct prev_kprobe {
- struct kprobe *kp;
- unsigned long status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
- unsigned long kprobe_status;
- struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-extern int kprobe_handle_illslot(unsigned long pc);
-#else
-
-#define kprobe_handle_illslot(pc) (-1)
-
-#endif /* CONFIG_KPROBES */
-#endif /* __ASM_SH_KPROBES_H */
diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h
deleted file mode 100644
index 7c2fa27a43f849..00000000000000
--- a/arch/sh/include/asm/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 4
-#define __ALIGN_STR ".balign 4"
-
-#endif
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
deleted file mode 100644
index 2b4b085e8f2195..00000000000000
--- a/arch/sh/include/asm/machvec.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/machvec.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- */
-
-#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <generated/machtypes.h>
-
-struct sh_machine_vector {
- void (*mv_setup)(char **cmdline_p);
- const char *mv_name;
-
- int (*mv_irq_demux)(int irq);
- void (*mv_init_irq)(void);
-
-#ifdef CONFIG_HAS_IOPORT_MAP
- void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
- void (*mv_ioport_unmap)(void __iomem *);
-#endif
-
- int (*mv_clk_init)(void);
- int (*mv_mode_pins)(void);
-
- void (*mv_mem_init)(void);
- void (*mv_mem_reserve)(void);
-};
-
-extern struct sh_machine_vector sh_mv;
-
-#define get_system_type() sh_mv.mv_name
-
-#define __initmv \
- __used __section(".machvec.init")
-
-#endif /* _ASM_SH_MACHVEC_H */
diff --git a/arch/sh/include/asm/mmiowb.h b/arch/sh/include/asm/mmiowb.h
deleted file mode 100644
index 535d59735f1d85..00000000000000
--- a/arch/sh/include/asm/mmiowb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMIOWB_H
-#define __ASM_SH_MMIOWB_H
-
-#include <asm/barrier.h>
-
-/* synco on SH-4A, otherwise a nop */
-#define mmiowb() wmb()
-
-#include <asm-generic/mmiowb.h>
-
-#endif /* __ASM_SH_MMIOWB_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
deleted file mode 100644
index 172e329fd92d02..00000000000000
--- a/arch/sh/include/asm/mmu.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MMU_H
-#define __MMU_H
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR 0xff000070
-#define PMB_IRMCR 0xff000078
-
-#define PASCR_SE 0x80000000
-
-#define PMB_ADDR 0xf6100000
-#define PMB_DATA 0xf7100000
-
-#define NR_PMB_ENTRIES 16
-
-#define PMB_E_MASK 0x0000000f
-#define PMB_E_SHIFT 8
-
-#define PMB_PFN_MASK 0xff000000
-
-#define PMB_SZ_16M 0x00000000
-#define PMB_SZ_64M 0x00000010
-#define PMB_SZ_128M 0x00000080
-#define PMB_SZ_512M 0x00000090
-#define PMB_SZ_MASK PMB_SZ_512M
-#define PMB_C 0x00000008
-#define PMB_WT 0x00000001
-#define PMB_UB 0x00000200
-#define PMB_CACHE_MASK (PMB_C | PMB_WT | PMB_UB)
-#define PMB_V 0x00000100
-
-#define PMB_NO_ENTRY (-1)
-
-#ifndef __ASSEMBLY__
-#include <linux/errno.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
- mm_context_id_t id;
- void *vdso;
-#else
- unsigned long end_brk;
-#endif
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- unsigned long exec_fdpic_loadmap;
- unsigned long interp_fdpic_loadmap;
-#endif
-} mm_context_t;
-
-#ifdef CONFIG_PMB
-/* arch/sh/mm/pmb.c */
-bool __in_29bit_mode(void);
-
-void pmb_init(void);
-int pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot);
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller);
-int pmb_unmap(void __iomem *addr);
-
-#else
-
-static inline int
-pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- return -EINVAL;
-}
-
-static inline void __iomem *
-pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- return NULL;
-}
-
-static inline int pmb_unmap(void __iomem *addr)
-{
- return -EINVAL;
-}
-
-#define pmb_init(addr) do { } while (0)
-
-#ifdef CONFIG_29BIT
-#define __in_29bit_mode() (1)
-#else
-#define __in_29bit_mode() (0)
-#endif
-
-#endif /* CONFIG_PMB */
-
-static inline void __iomem *
-pmb_remap(phys_addr_t phys, unsigned long size, pgprot_t prot)
-{
- return pmb_remap_caller(phys, size, prot, __builtin_return_address(0));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MMU_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
deleted file mode 100644
index 78eef4e7d5df28..00000000000000
--- a/arch/sh/include/asm/mmu_context.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#include <cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <linux/uaccess.h>
-#include <linux/mm_types.h>
-
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- * (a) TLB cache version (or round, cycle whatever expression you like)
- * (b) ASID (Address Space IDentifier)
- */
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMU_CONTEXT_ASID_MASK 0x0000ffff
-#else
-#define MMU_CONTEXT_ASID_MASK 0x000000ff
-#endif
-
-#define MMU_CONTEXT_VERSION_MASK (~0UL & ~MMU_CONTEXT_ASID_MASK)
-#define MMU_CONTEXT_FIRST_VERSION (MMU_CONTEXT_ASID_MASK + 1)
-
-/* Impossible ASID value, to differentiate from NO_CONTEXT. */
-#define MMU_NO_ASID MMU_CONTEXT_FIRST_VERSION
-#define NO_CONTEXT 0UL
-
-#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
-
-#ifdef CONFIG_MMU
-#define cpu_context(cpu, mm) ((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm) \
- (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK 0xfffff000
-
-#include <asm/mmu_context_32.h>
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
- unsigned long asid = asid_cache(cpu);
-
- /* Check if we have old version of context. */
- if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
- /* It's up to date, do nothing */
- return;
-
- /* It's old, we need to get new context with new version. */
- if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
- /*
- * We exhaust ASID of this version.
- * Flush all TLB and start new cycle.
- */
- local_flush_tlb_all();
-
- /*
- * Fix version; Note that we avoid version #0
- * to distinguish NO_CONTEXT.
- */
- if (!asid)
- asid = MMU_CONTEXT_FIRST_VERSION;
- }
-
- cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-#define init_new_context init_new_context
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
- int i;
-
- for_each_online_cpu(i)
- cpu_context(i, mm) = NO_CONTEXT;
-
- return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
- get_mmu_context(mm, cpu);
- set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
- struct mm_struct *next,
- struct task_struct *tsk)
-{
- unsigned int cpu = smp_processor_id();
-
- if (likely(prev != next)) {
- cpumask_set_cpu(cpu, mm_cpumask(next));
- set_TTB(next->pgd);
- activate_context(next, cpu);
- } else
- if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
- activate_context(next, cpu);
-}
-
-#include <asm-generic/mmu_context.h>
-
-#else
-
-#define set_asid(asid) do { } while (0)
-#define get_asid() (0)
-#define cpu_asid(cpu, mm) ({ (void)cpu; NO_CONTEXT; })
-#define switch_and_save_asid(asid) (0)
-#define set_TTB(pgd) do { } while (0)
-#define get_TTB() (0)
-
-#include <asm-generic/nommu_context.h>
-
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Enable MMU */
- __raw_writel(MMU_CONTROL_INIT, MMUCR);
- ctrl_barrier();
-
- if (asid_cache(cpu) == NO_CONTEXT)
- asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
- set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
- unsigned long cr;
-
- cr = __raw_readl(MMUCR);
- cr &= ~MMU_CONTROL_INIT;
- __raw_writel(cr, MMUCR);
-
- ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu() do { } while (0)
-#define disable_mmu() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
deleted file mode 100644
index bc5034fa62493b..00000000000000
--- a/arch/sh/include/asm/mmu_context_32.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMU_CONTEXT_32_H
-#define __ASM_SH_MMU_CONTEXT_32_H
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-static inline void set_asid(unsigned long asid)
-{
- __raw_writel(asid, MMU_PTEAEX);
-}
-
-static inline unsigned long get_asid(void)
-{
- return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
-}
-#else
-static inline void set_asid(unsigned long asid)
-{
- unsigned long __dummy;
-
- __asm__ __volatile__ ("mov.l %2, %0\n\t"
- "and %3, %0\n\t"
- "or %1, %0\n\t"
- "mov.l %0, %2"
- : "=&r" (__dummy)
- : "r" (asid), "m" (__m(MMU_PTEH)),
- "r" (0xffffff00));
-}
-
-static inline unsigned long get_asid(void)
-{
- unsigned long asid;
-
- __asm__ __volatile__ ("mov.l %1, %0"
- : "=r" (asid)
- : "m" (__m(MMU_PTEH)));
- asid &= MMU_CONTEXT_ASID_MASK;
- return asid;
-}
-#endif /* CONFIG_CPU_HAS_PTEAEX */
-
-/* MMU_TTB is used for optimizing the fault handling. */
-static inline void set_TTB(pgd_t *pgd)
-{
- __raw_writel((unsigned long)pgd, MMU_TTB);
-}
-
-static inline pgd_t *get_TTB(void)
-{
- return (pgd_t *)__raw_readl(MMU_TTB);
-}
-#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
deleted file mode 100644
index 7b8dead2723dc3..00000000000000
--- a/arch/sh/include/asm/mmzone.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMZONE_H
-#define __ASM_SH_MMZONE_H
-
-#ifdef CONFIG_NUMA
-#include <linux/numa.h>
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid) (node_data[nid])
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
- int nid;
-
- for (nid = 0; nid < MAX_NUMNODES; nid++)
- if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
- break;
-
- return nid;
-}
-
-static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
-{
- return NODE_DATA(pfn_to_nid(pfn));
-}
-
-/* arch/sh/mm/numa.c */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
-#else
-static inline void
-setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
-}
-#endif /* CONFIG_NUMA */
-
-/* Platform specific mem init */
-void __init plat_mem_setup(void);
-
-/* arch/sh/kernel/setup.c */
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-/* arch/sh/mm/init.c */
-void __init allocate_pgdat(unsigned int nid);
-
-#endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
deleted file mode 100644
index 337663a028dbc0..00000000000000
--- a/arch/sh/include/asm/module.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_MODULE_H
-#define _ASM_SH_MODULE_H
-
-#include <asm-generic/module.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-struct mod_arch_specific {
- struct list_head fde_list;
- struct list_head cie_list;
-};
-#endif
-
-#endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
deleted file mode 100644
index eca5daa43b93df..00000000000000
--- a/arch/sh/include/asm/page.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT 12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT 13
-#elif defined(CONFIG_PAGE_SIZE_16KB)
-# define PAGE_SHIFT 14
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT 16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-#define PTE_MASK PAGE_MASK
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT 16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT 18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT 20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT 22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT 26
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE (1UL << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-#include <asm/uncached.h>
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end, memory_limit;
-
-static inline unsigned long
-pages_do_alias(unsigned long addr1, unsigned long addr2)
-{
- return (addr1 ^ addr2) & shm_align_mask;
-}
-
-#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, void *from);
-#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE)
-
-struct page;
-struct vm_area_struct;
-
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-extern void clear_user_highpage(struct page *page, unsigned long vaddr);
-#define clear_user_highpage clear_user_highpage
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
- ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
- ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#else
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low)
-#define __pte(x) ((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#define pte_pgprot(x) __pgprot(pte_val(x) & PTE_FLAGS_MASK)
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START CONFIG_MEMORY_START
-#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
-
-/*
- * PHYSICAL_OFFSET is the offset in physical memory where the base
- * of the kernel is loaded.
- */
-#ifdef CONFIG_PHYSICAL_START
-#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
-#else
-#define PHYSICAL_OFFSET 0
-#endif
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_PMB
-#define ___pa(x) ((x)-PAGE_OFFSET+__MEMORY_START)
-#define ___va(x) ((x)+PAGE_OFFSET-__MEMORY_START)
-#else
-#define ___pa(x) ((x)-PAGE_OFFSET)
-#define ___va(x) ((x)+PAGE_OFFSET)
-#endif
-
-#ifndef __ASSEMBLY__
-#define __pa(x) ___pa((unsigned long)x)
-#define __va(x) (void *)___va((unsigned long)x)
-#endif /* !__ASSEMBLY__ */
-
-#ifdef CONFIG_UNCACHED_MAPPING
-#if defined(CONFIG_29BIT)
-#define UNCAC_ADDR(addr) P2SEGADDR(addr)
-#define CAC_ADDR(addr) P1SEGADDR(addr)
-#else
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
-#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
-#endif
-#else
-#define UNCAC_ADDR(addr) ((addr))
-#define CAC_ADDR(addr) ((addr))
-#endif
-
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START (__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET (PFN_START)
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
deleted file mode 100644
index 54c30126ea17c3..00000000000000
--- a/arch/sh/include/asm/pci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PCI_H
-#define __ASM_SH_PCI_H
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- already-configured bus numbers - to be used for buggy BIOSes
- or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses() 1
-
-/*
- * A board can define one or more PCI channels that represent built-in (or
- * external) PCI controllers.
- */
-struct pci_channel {
- struct pci_channel *next;
- struct pci_bus *bus;
-
- struct pci_ops *pci_ops;
-
- struct resource *resources;
- unsigned int nr_resources;
-
- unsigned long io_offset;
- unsigned long mem_offset;
-
- unsigned long reg_base;
- unsigned long io_map_base;
-
- unsigned int index;
- unsigned int need_domain_info;
-
- /* Optional error handling */
- struct timer_list err_timer, serr_timer;
- unsigned int err_irq, serr_irq;
-};
-
-/* arch/sh/drivers/pci/pci.c */
-extern raw_spinlock_t pci_config_lock;
-
-extern int register_pci_controller(struct pci_channel *hose);
-extern void pcibios_report_status(unsigned int status_mask, int warn);
-
-/* arch/sh/drivers/pci/common.c */
-extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 *value);
-extern int early_read_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 *value);
-extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 *value);
-extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 value);
-extern int early_write_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 value);
-extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 value);
-extern void pcibios_enable_timers(struct pci_channel *hose);
-extern unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status, struct pci_channel *hose);
-extern int pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus);
-
-extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
-
-#define HAVE_PCI_MMAP
-#define ARCH_GENERIC_PCI_MMAP_RESOURCE
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-#ifdef CONFIG_PCI
-/*
- * None of the SH PCI controllers support MWI, it is always treated as a
- * direct memory write.
- */
-#define PCI_DISABLE_MWI
-#endif
-
-/* Board-specific fixup routines. */
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- struct pci_channel *hose = bus->sysdata;
- return hose->need_domain_info;
-}
-
-#endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
deleted file mode 100644
index 468c7ca8bd2e50..00000000000000
--- a/arch/sh/include/asm/perf_event.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PERF_EVENT_H
-#define __ASM_SH_PERF_EVENT_H
-
-struct hw_perf_event;
-
-#define MAX_HWEVENTS 2
-
-struct sh_pmu {
- const char *name;
- unsigned int num_events;
- void (*disable_all)(void);
- void (*enable_all)(void);
- void (*enable)(struct hw_perf_event *, int);
- void (*disable)(struct hw_perf_event *, int);
- u64 (*read)(int);
- int (*event_map)(int);
- unsigned int max_events;
- unsigned long raw_event_mask;
- const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/* arch/sh/kernel/perf_event.c */
-extern int register_sh_pmu(struct sh_pmu *);
-extern int reserve_pmc_hardware(void);
-extern void release_pmc_hardware(void);
-
-#endif /* __ASM_SH_PERF_EVENT_H */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
deleted file mode 100644
index a9e98233c4d498..00000000000000
--- a/arch/sh/include/asm/pgalloc.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGALLOC_H
-#define __ASM_SH_PGALLOC_H
-
-#include <asm/page.h>
-
-#define __HAVE_ARCH_PMD_ALLOC_ONE
-#define __HAVE_ARCH_PMD_FREE
-#define __HAVE_ARCH_PGD_FREE
-#include <asm-generic/pgalloc.h>
-
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-#if PAGETABLE_LEVELS > 2
-extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
-extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
-extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
-#define __pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, (pmdp))
-#endif
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
- pte_t *pte)
-{
- set_pmd(pmd, __pmd((unsigned long)pte));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- pgtable_t pte)
-{
- set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
-}
-
-#define __pte_free_tlb(tlb,pte,addr) \
-do { \
- pgtable_pte_page_dtor(pte); \
- tlb_remove_page((tlb), (pte)); \
-} while (0)
-
-#endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
deleted file mode 100644
index 08bff93927ffde..00000000000000
--- a/arch/sh/include/asm/pgtable-2level.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_2LEVEL_H
-#define __ASM_SH_PGTABLE_2LEVEL_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-/*
- * traditional two-level paging structure
- */
-#define PAGETABLE_LEVELS 2
-
-/* PTE bits */
-#define PTE_MAGNITUDE 2 /* 32-bit PTEs */
-
-#define PTE_SHIFT PAGE_SHIFT
-#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
-
-#define PTRS_PER_PGD (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
-
-#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
deleted file mode 100644
index d1ce73f3bd85ef..00000000000000
--- a/arch/sh/include/asm/pgtable-3level.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_3LEVEL_H
-#define __ASM_SH_PGTABLE_3LEVEL_H
-
-#include <asm-generic/pgtable-nopud.h>
-
-/*
- * Some cores need a 3-level page table layout, for example when using
- * 64-bit PTEs and 4K pages.
- */
-#define PAGETABLE_LEVELS 3
-
-#define PTE_MAGNITUDE 3 /* 64-bit PTEs on SH-X2 TLB */
-
-/* PGD bits */
-#define PGDIR_SHIFT 30
-
-#define PTRS_PER_PGD 4
-#define USER_PTRS_PER_PGD 2
-
-/* PMD bits */
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-#define PTRS_PER_PMD ((1 << PGDIR_SHIFT) / PMD_SIZE)
-
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
-
-typedef union {
- struct {
- unsigned long pmd_low;
- unsigned long pmd_high;
- };
- unsigned long long pmd;
-} pmd_t;
-#define pmd_val(x) ((x).pmd)
-#define __pmd(x) ((pmd_t) { .pmd = (x) } )
-
-static inline pmd_t *pud_pgtable(pud_t pud)
-{
- return (pmd_t *)(unsigned long)pud_val(pud);
-}
-
-/* only used by the stubbed out hugetlb gup code, should never be called */
-#define pud_page(pud) NULL
-#define pud_none(x) (!pud_val(x))
-#define pud_present(x) (pud_val(x))
-#define pud_clear(xp) do { set_pud(xp, __pud(0)); } while (0)
-#define pud_bad(x) (pud_val(x) & ~PAGE_MASK)
-
-/*
- * (puds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
-
-#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
deleted file mode 100644
index 3ce30becf6dfa9..00000000000000
--- a/arch/sh/include/asm/pgtable.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * This file contains the functions and defines necessary to modify and
- * use the SuperH page table tree.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#ifndef __ASM_SH_PGTABLE_H
-#define __ASM_SH_PGTABLE_H
-
-#ifdef CONFIG_X2TLB
-#include <asm/pgtable-3level.h>
-#else
-#include <asm/pgtable-2level.h>
-#endif
-#include <asm/page.h>
-#include <asm/mmu.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/addrspace.h>
-#include <asm/fixmap.h>
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Effective and physical address definitions, to aid with sign
- * extension.
- */
-#define NEFF 32
-#define NEFF_SIGN (1LL << (NEFF - 1))
-#define NEFF_MASK (-1LL << NEFF)
-
-static inline unsigned long long neff_sign_extend(unsigned long val)
-{
- unsigned long long extended = val;
- return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
-}
-
-#ifdef CONFIG_29BIT
-#define NPHYS 29
-#else
-#define NPHYS 32
-#endif
-
-#define NPHYS_SIGN (1LL << (NPHYS - 1))
-#define NPHYS_MASK (-1LL << NPHYS)
-
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* Entries per level */
-#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-
-#define PHYS_ADDR_MASK29 0x1fffffff
-#define PHYS_ADDR_MASK32 0xffffffff
-
-static inline unsigned long phys_addr_mask(void)
-{
- /* Is the MMU in 29bit mode? */
- if (__in_29bit_mode())
- return PHYS_ADDR_MASK29;
-
- return PHYS_ADDR_MASK32;
-}
-
-#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
-#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
-
-#define VMALLOC_START (P3SEG)
-#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
-
-#include <asm/pgtable_32.h>
-
-/*
- * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
- * protection for execute, and considers it the same as a read. Also, write
- * permission implies read permission. This is the closest we can get..
- *
- * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
- * not only supporting separate execute, read, and write bits, but having
- * completely separate permission bits for user and kernel space.
- */
- /*xwr*/
-
-typedef pte_t *pte_addr_t;
-
-#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
-
-struct vm_area_struct;
-struct mm_struct;
-
-extern void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-extern void __update_tlb(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-
-static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
-{
- pte_t pte = *ptep;
- __update_cache(vma, address, pte);
- __update_tlb(vma, address, pte);
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-extern void page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd);
-
-static inline bool __pte_access_permitted(pte_t pte, u64 prot)
-{
- return (pte_val(pte) & (prot | _PAGE_SPECIAL)) == prot;
-}
-
-#ifdef CONFIG_X2TLB
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT;
-
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_USER_READ);
- if (write)
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
- return __pte_access_permitted(pte, prot);
-}
-#else
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT | _PAGE_USER;
-
- if (write)
- prot |= _PAGE_RW;
- return __pte_access_permitted(pte, prot);
-}
-#endif
-
-#define pte_access_permitted pte_access_permitted
-
-/* arch/sh/mm/mmap.c */
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
deleted file mode 100644
index d0240decacca7f..00000000000000
--- a/arch/sh/include/asm/pgtable_32.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- * In order to keep this relatively clean, do not use these for defining
- * SH-3 specific flags until all of the other unused bits have been
- * exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- * Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- * and timing control which (together with bit 0) are moved into the
- * old-style PTEA on the parts that support it.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */
-#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
-#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
-#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
-#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
-#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
-#define _PAGE_PROTNONE 0x200 /* software: if not present */
-#define _PAGE_ACCESSED 0x400 /* software: page referenced */
-#define _PAGE_SPECIAL 0x800 /* software: special page */
-
-#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */
-
-#define _PAGE_EXT_WIRED 0x4000 /* software: Wire TLB entry */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
-
-#ifdef CONFIG_X2TLB
-#define _PAGE_PCC_MASK 0x00000000 /* No legacy PTEA support */
-#else
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */
-
-#define _PAGE_PCC_MASK 0xe0000001
-
-/* copy the ptea attributes */
-static inline unsigned long copy_ptea_attributes(unsigned long x)
-{
- return ((x >> 28) & 0xe) | (x & 0x1);
-}
-#endif
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \
- _PAGE_SZ1 | _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \
- _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK (phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if !defined(CONFIG_MMU)
-# define _PAGE_FLAGS_HARD 0ULL
-#elif defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-# define _PAGE_WIRED (_PAGE_EXT(_PAGE_EXT_WIRED))
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-# define _PAGE_WIRED (0)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD)
-#endif
-
-/*
- * Mask of bits that are to be preserved across pgprot changes.
- */
-#define _PAGE_CHG_MASK \
- (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_SPECIAL)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_EXEC | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY PAGE_EXECREAD
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_USER_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
- _PAGE_CACHABLE | _PAGE_ACCESSED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD PAGE_READONLY
-#define PAGE_RWX PAGE_SHARED
-#define PAGE_WRITEONLY PAGE_SHARED
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
- (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
- (type))
-#else /* no mmu */
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_EXECREAD __pgprot(0)
-#define PAGE_RWX __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_WRITEONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-#define PAGE_KERNEL_NOCACHE __pgprot(0)
-#define PAGE_KERNEL_RO __pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
- ptep->pte_high = pte.pte_high;
- smp_wmb();
- ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
- __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
- __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x) (!pte_val(x))
-#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x))
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED)
-#define pte_special(pte) ((pte).pte_low & _PAGE_SPECIAL)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte) \
- ((pte).pte_high & (_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE))
-#else
-#define pte_write(pte) ((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~(_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE));
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
- __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
- pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
- return pte;
-}
-
-static inline unsigned long pmd_page_vaddr(pmd_t pmd)
-{
- return (unsigned long)pmd_val(pmd);
-}
-
-#define pmd_pfn(pmd) (__pa(pmd_val(pmd)) >> PAGE_SHIFT)
-#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
- &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- * _PAGE_PRESENT at bit 8
- * _PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- * and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x) ((x).val & 0x1f)
-#define __swp_offset(x) ((x).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
-
-#else
-#define __swp_type(x) ((x).val & 0xff)
-#define __swp_offset(x) ((x).val >> 10)
-#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/arch/sh/include/asm/platform_early.h b/arch/sh/include/asm/platform_early.h
deleted file mode 100644
index fc802137c37d43..00000000000000
--- a/arch/sh/include/asm/platform_early.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX--License-Identifier: GPL-2.0 */
-
-#ifndef __PLATFORM_EARLY__
-#define __PLATFORM_EARLY__
-
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-
-struct sh_early_platform_driver {
- const char *class_str;
- struct platform_driver *pdrv;
- struct list_head list;
- int requested_id;
- char *buffer;
- int bufsize;
-};
-
-#define EARLY_PLATFORM_ID_UNSET -2
-#define EARLY_PLATFORM_ID_ERROR -3
-
-extern int sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf);
-extern void sh_early_platform_add_devices(struct platform_device **devs, int num);
-
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return !pdev->dev.driver;
-}
-
-extern void sh_early_platform_driver_register_all(char *class_str);
-extern int sh_early_platform_driver_probe(char *class_str,
- int nr_probe, int user_only);
-
-#define sh_early_platform_init(class_string, platdrv) \
- sh_early_platform_init_buffer(class_string, platdrv, NULL, 0)
-
-#ifndef MODULE
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static __initdata struct sh_early_platform_driver early_driver = { \
- .class_str = class_string, \
- .buffer = buf, \
- .bufsize = bufsiz, \
- .pdrv = platdrv, \
- .requested_id = EARLY_PLATFORM_ID_UNSET, \
-}; \
-static int __init sh_early_platform_driver_setup_func(char *buffer) \
-{ \
- return sh_early_platform_driver_register(&early_driver, buffer); \
-} \
-early_param(class_string, sh_early_platform_driver_setup_func)
-#else /* MODULE */
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static inline char *sh_early_platform_driver_setup_func(void) \
-{ \
- return bufsiz ? buf : NULL; \
-}
-#endif /* MODULE */
-
-#endif /* __PLATFORM_EARLY__ */
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
deleted file mode 100644
index f8982b757c33ac..00000000000000
--- a/arch/sh/include/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
deleted file mode 100644
index 85a6c1c3c16e70..00000000000000
--- a/arch/sh/include/asm/processor.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-#include <asm/cache.h>
-
-#ifndef __ASSEMBLY__
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- *
- * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- * for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
- /* SH-2 types */
- CPU_SH7619, CPU_J2,
-
- /* SH-2A types */
- CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
- CPU_MXG,
-
- /* SH-3 types */
- CPU_SH7705, CPU_SH7706, CPU_SH7707,
- CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
- CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
- /* SH-4 types */
- CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
- CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
- /* SH-4A types */
- CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
- CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SH7734, CPU_SHX3,
-
- /* SH4AL-DSP types */
- CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
-
- /* Unknown subtype */
- CPU_SH_NONE
-};
-
-enum cpu_family {
- CPU_FAMILY_SH2,
- CPU_FAMILY_SH2A,
- CPU_FAMILY_SH3,
- CPU_FAMILY_SH4,
- CPU_FAMILY_SH4A,
- CPU_FAMILY_SH4AL_DSP,
- CPU_FAMILY_UNKNOWN,
-};
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
- unsigned long long next;
- unsigned long long first;
- unsigned long long last;
-
- unsigned int entries;
- unsigned int step;
-
- unsigned long flags;
-};
-
-struct sh_cpuinfo {
- unsigned int type, family;
- int cut_major, cut_minor;
- unsigned long loops_per_jiffy;
- unsigned long asid_cache;
-
- struct cache_info icache; /* Primary I-cache */
- struct cache_info dcache; /* Primary D-cache */
- struct cache_info scache; /* Secondary cache */
-
- /* TLB info */
- struct tlb_info itlb;
- struct tlb_info dtlb;
-
- unsigned int phys_bits;
- unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax() barrier()
-
-void default_idle(void);
-void stop_this_cpu(void *);
-
-/* Forward decl */
-struct seq_operations;
-struct task_struct;
-
-extern struct pt_regs fake_swapper_regs;
-
-extern void cpu_init(void);
-extern void cpu_probe(void);
-
-/* arch/sh/kernel/process.c */
-extern unsigned int xstate_size;
-extern void free_thread_xstate(struct task_struct *);
-extern struct kmem_cache *task_xstate_cachep;
-
-/* arch/sh/mm/alignment.c */
-extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
-extern int set_unalign_ctl(struct task_struct *, unsigned int val);
-
-#define GET_UNALIGN_CTL(tsk, addr) get_unalign_ctl((tsk), (addr))
-#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val))
-
-/* arch/sh/mm/init.c */
-extern unsigned int mem_init_done;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-extern const struct seq_operations cpuinfo_op;
-
-/* thread_struct flags */
-#define SH_THREAD_UAC_NOPRINT (1 << 0)
-#define SH_THREAD_UAC_SIGBUS (1 << 1)
-#define SH_THREAD_UAC_MASK (SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
-
-/* processor boot mode configuration */
-#define MODE_PIN0 (1 << 0)
-#define MODE_PIN1 (1 << 1)
-#define MODE_PIN2 (1 << 2)
-#define MODE_PIN3 (1 << 3)
-#define MODE_PIN4 (1 << 4)
-#define MODE_PIN5 (1 << 5)
-#define MODE_PIN6 (1 << 6)
-#define MODE_PIN7 (1 << 7)
-#define MODE_PIN8 (1 << 8)
-#define MODE_PIN9 (1 << 9)
-#define MODE_PIN10 (1 << 10)
-#define MODE_PIN11 (1 << 11)
-#define MODE_PIN12 (1 << 12)
-#define MODE_PIN13 (1 << 13)
-#define MODE_PIN14 (1 << 14)
-#define MODE_PIN15 (1 << 15)
-
-int generic_mode_pins(void);
-int test_mode_pin(int pin);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#else
-#define instruction_size(insn) (2)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/processor_32.h>
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
deleted file mode 100644
index 27aebf1e75a200..00000000000000
--- a/arch/sh/include/asm/processor_32.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/hw_breakpoint.h>
-
-/* Core Processor Version Register */
-#define CCN_PVR 0xff000030
-#define CCN_CVR 0xff000040
-#define CCN_PRR 0xff000044
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE 0x7c000000UL
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- * When it's set, it means the processor doesn't have right to use FPU,
- * and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- * Interrupt level mask
- */
-#define SR_DSP 0x00001000
-#define SR_IMASK 0x000000f0
-#define SR_FD 0x00008000
-#define SR_MD 0x40000000
-
-/*
- * DSP structure and data
- */
-struct sh_dsp_struct {
- unsigned long dsp_regs[14];
- long status;
-};
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- long status; /* software status information */
-};
-
-/* Dummy fpu emulator */
-struct sh_fpu_soft_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- unsigned char lookahead;
- unsigned long entry_pc;
-};
-
-union thread_xstate {
- struct sh_fpu_hard_struct hardfpu;
- struct sh_fpu_soft_struct softfpu;
-};
-
-struct thread_struct {
- /* Saved registers when thread is descheduled */
- unsigned long sp;
- unsigned long pc;
-
- /* Various thread flags, see SH_THREAD_xxx */
- unsigned long flags;
-
- /* Save middle states of ptrace breakpoints */
- struct perf_event *ptrace_bps[HBP_NUM];
-
-#ifdef CONFIG_SH_DSP
- /* Dsp status information */
- struct sh_dsp_struct dsp_status;
-#endif
-
- /* Extended processor state */
- union thread_xstate *xstate;
-
- /*
- * fpu_counter contains the number of consecutive context switches
- * that the FPU is used. If this is over a threshold, the lazy fpu
- * saving becomes unlazy to save the trap. This is an unsigned char
- * so that after 256 times the counter wraps and the behavior turns
- * lazy again; this to deal with bursty apps that only use FPU for
- * a short time
- */
- unsigned char fpu_counter;
-};
-
-#define INIT_THREAD { \
- .sp = sizeof(init_stack) + (long) &init_stack, \
- .flags = 0, \
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Set FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "or %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Clear out FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "and %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT 0x00080000
-
-#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */
-#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk) (tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl);
-
-#ifdef CONFIG_DUMP_CODE
-void show_code(struct pt_regs *regs);
-#else
-static inline void show_code(struct pt_regs *regs)
-{
-}
-#endif
-
-extern unsigned long __get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15])
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-
-#define PREFETCH_STRIDE L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-
-static inline void prefetch(const void *x)
-{
- __builtin_prefetch(x, 0, 3);
-}
-
-static inline void prefetchw(const void *x)
-{
- __builtin_prefetch(x, 1, 3);
-}
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
deleted file mode 100644
index 6c89e3e04cee7f..00000000000000
--- a/arch/sh/include/asm/ptrace.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-
-#include <linux/stringify.h>
-#include <linux/stddef.h>
-#include <linux/thread_info.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <uapi/asm/ptrace.h>
-
-#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
-#define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15])
-
-static inline unsigned long instruction_pointer(struct pt_regs *regs)
-{
- return regs->pc;
-}
-static inline void instruction_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->pc = val;
-}
-
-static inline unsigned long frame_pointer(struct pt_regs *regs)
-{
- return regs->regs[14];
-}
-
-static inline unsigned long user_stack_pointer(struct pt_regs *regs)
-{
- return regs->regs[15];
-}
-
-static inline void user_stack_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->regs[15] = val;
-}
-
-#define arch_has_single_step() (1)
-
-/*
- * kprobe-based event tracer support
- */
-struct pt_regs_offset {
- const char *name;
- int offset;
-};
-
-#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
-#define REGS_OFFSET_NAME(num) \
- {.name = __stringify(r##num), .offset = offsetof(struct pt_regs, regs[num])}
-#define TREGS_OFFSET_NAME(num) \
- {.name = __stringify(tr##num), .offset = offsetof(struct pt_regs, tregs[num])}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-/* Query offset/name of register from its name/offset */
-extern int regs_query_register_offset(const char *name);
-extern const char *regs_query_register_name(unsigned int offset);
-
-extern const struct pt_regs_offset regoffset_table[];
-
-/**
- * regs_get_register() - get register value from its offset
- * @regs: pt_regs from which register value is gotten.
- * @offset: offset number of the register.
- *
- * regs_get_register returns the value of a register. The @offset is the
- * offset of the register in struct pt_regs address which specified by @regs.
- * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
- */
-static inline unsigned long regs_get_register(struct pt_regs *regs,
- unsigned int offset)
-{
- if (unlikely(offset > MAX_REG_OFFSET))
- return 0;
- return *(unsigned long *)((unsigned long)regs + offset);
-}
-
-/**
- * regs_within_kernel_stack() - check the address in the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @addr: address which is checked.
- *
- * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
- * If @addr is within the kernel stack, it returns true. If not, returns false.
- */
-static inline int regs_within_kernel_stack(struct pt_regs *regs,
- unsigned long addr)
-{
- return ((addr & ~(THREAD_SIZE - 1)) ==
- (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
-}
-
-/**
- * regs_get_kernel_stack_nth() - get Nth entry of the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @n: stack entry number.
- *
- * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
- * this returns 0.
- */
-static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
- unsigned int n)
-{
- unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
- addr += n;
- if (regs_within_kernel_stack(regs, (unsigned long)addr))
- return *addr;
- else
- return 0;
-}
-
-struct perf_event;
-struct perf_sample_data;
-
-extern void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs);
-
-#define task_pt_regs(task) \
- ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
- unsigned long pc = regs->pc;
-
- if (virt_addr_uncached(pc))
- return CAC_ADDR(pc);
-
- return pc;
-}
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h
deleted file mode 100644
index 5f37ad7c60652b..00000000000000
--- a/arch/sh/include/asm/ptrace_32.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PTRACE_32_H
-#define __ASM_SH_PTRACE_32_H
-
-#include <uapi/asm/ptrace_32.h>
-
-
-#define MAX_REG_OFFSET offsetof(struct pt_regs, tra)
-static inline long regs_return_value(struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-#endif /* __ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h
deleted file mode 100644
index c5f072572fd18a..00000000000000
--- a/arch/sh/include/asm/push-switch.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PUSH_SWITCH_H
-#define __ASM_SH_PUSH_SWITCH_H
-
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-struct push_switch {
- /* switch state */
- unsigned int state:1;
- /* debounce timer */
- struct timer_list debounce;
- /* workqueue */
- struct work_struct work;
- /* platform device, for workqueue handler */
- struct platform_device *pdev;
-};
-
-struct push_switch_platform_info {
- /* IRQ handler */
- irqreturn_t (*irq_handler)(int irq, void *data);
- /* Special IRQ flags */
- unsigned int irq_flags;
- /* Bit location of switch */
- unsigned int bit;
- /* Symbolic switch name */
- const char *name;
-};
-
-#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/arch/sh/include/asm/reboot.h b/arch/sh/include/asm/reboot.h
deleted file mode 100644
index 5c445c90df14d9..00000000000000
--- a/arch/sh/include/asm/reboot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_REBOOT_H
-#define __ASM_SH_REBOOT_H
-
-#include <linux/kdebug.h>
-
-struct pt_regs;
-
-struct machine_ops {
- void (*restart)(char *cmd);
- void (*halt)(void);
- void (*power_off)(void);
- void (*shutdown)(void);
- void (*crash_shutdown)(struct pt_regs *);
-};
-
-extern struct machine_ops machine_ops;
-
-/* arch/sh/kernel/machine_kexec.c */
-void native_machine_crash_shutdown(struct pt_regs *regs);
-
-#endif /* __ASM_SH_REBOOT_H */
diff --git a/arch/sh/include/asm/romimage-macros.h b/arch/sh/include/asm/romimage-macros.h
deleted file mode 100644
index f9352ee7c21b4b..00000000000000
--- a/arch/sh/include/asm/romimage-macros.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ROMIMAGE_MACRO_H
-#define __ROMIMAGE_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.l r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.w r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.b r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro WAIT, time
- mov.l 2f, r3
-1 :
- nop
- tst r3, r3
- bf/s 1b
- dt r3
- bra 3f
- nop
- .align 2
-2 : .long \time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro DD, addr, addr2, nr
- mov.l 1f, r1
- mov.l @r1, r0
- bra 2f
- nop
- .align 2
-1 : .long \addr
-2 :
-.endm
-
-#endif /* __ROMIMAGE_MACRO_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
deleted file mode 100644
index 69dbae2949b0dd..00000000000000
--- a/arch/sh/include/asm/rtc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-void time_init(void);
-
-#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
-
-struct sh_rtc_platform_info {
- unsigned long capabilities;
-};
-
-#include <cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
deleted file mode 100644
index d4578395fd665c..00000000000000
--- a/arch/sh/include/asm/seccomp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SECCOMP_H
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define __SECCOMP_ARCH_LE __AUDIT_ARCH_LE
-#else
-#define __SECCOMP_ARCH_LE 0
-#endif
-
-#define SECCOMP_ARCH_NATIVE (AUDIT_ARCH_SH | __SECCOMP_ARCH_LE)
-#define SECCOMP_ARCH_NATIVE_NR NR_syscalls
-#define SECCOMP_ARCH_NATIVE_NAME "sh"
-
-#endif /* __ASM_SECCOMP_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
deleted file mode 100644
index 0cb0ca149ac34a..00000000000000
--- a/arch/sh/include/asm/sections.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SECTIONS_H
-#define __ASM_SH_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char __machvec_start[], __machvec_end[];
-extern char __uncached_start, __uncached_end;
-extern char __start_eh_frame[], __stop_eh_frame[];
-
-#endif /* __ASM_SH_SECTIONS_H */
-
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
deleted file mode 100644
index fc807011187fa1..00000000000000
--- a/arch/sh/include/asm/setup.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _SH_SETUP_H
-#define _SH_SETUP_H
-
-#include <uapi/asm/setup.h>
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-void sh_mv_setup(void);
-void check_for_initrd(void);
-void per_cpu_trap_init(void);
-
-#endif /* _SH_SETUP_H */
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
deleted file mode 100644
index 2d2423478b71d4..00000000000000
--- a/arch/sh/include/asm/sfp-machine.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * Machine-dependent software floating-point definitions.
- SuperH kernel version.
- Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
- Contributed by Richard Henderson (rth@cygnus.com),
- Jakub Jelinek (jj@ultra.linux.cz),
- David S. Miller (davem@redhat.com) and
- Peter Maydell (pmaydell@chiark.greenend.org.uk).
-*/
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __LITTLE_ENDIAN 0
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __BIG_ENDIAN 0
-#endif
-
-#define _FP_W_TYPE_SIZE 32
-#define _FP_W_TYPE unsigned long
-#define _FP_WS_TYPE signed long
-#define _FP_I_TYPE long
-
-#define _FP_MUL_MEAT_S(R,X,Y) \
- _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y) \
- _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y) \
- _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S 0
-#define _FP_NANSIGN_D 0
-#define _FP_NANSIGN_Q 0
-
-#define _FP_KEEPNANFRACP 1
-
-/*
- * If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
- do { \
- if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \
- && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \
- { \
- R##_s = Y##_s; \
- _FP_FRAC_COPY_##wc(R,Y); \
- } \
- else \
- { \
- R##_s = X##_s; \
- _FP_FRAC_COPY_##wc(R,X); \
- } \
- R##_c = FP_CLS_NAN; \
- } while (0)
-
-//#define FP_ROUNDMODE FPSCR_RM
-#define FP_DENORM_ZERO 1/*FPSCR_DN*/
-
-/* Exception flags. */
-#define FP_EX_INVALID (1<<4)
-#define FP_EX_DIVZERO (1<<3)
-#define FP_EX_OVERFLOW (1<<2)
-#define FP_EX_UNDERFLOW (1<<1)
-#define FP_EX_INEXACT (1<<0)
-
-#endif
-
diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
deleted file mode 100644
index 2d9433d7540299..00000000000000
--- a/arch/sh/include/asm/sh7760fb.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef _ASM_SH_SH7760FB_H
-#define _ASM_SH_SH7760FB_H
-
-/*
- * some bits of the colormap registers should be written as zero.
- * create a mask for that.
- */
-#define SH7760FB_PALETTE_MASK 0x00f8fcf8
-
-/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
-#define SH7760FB_DMA_MASK 0x0C000000
-
-/* palette */
-#define LDPR(x) (((x) << 2))
-
-/* framebuffer registers and bits */
-#define LDICKR 0x400
-#define LDMTR 0x402
-/* see sh7760fb.h for LDMTR bits */
-#define LDDFR 0x404
-#define LDDFR_PABD (1 << 8)
-#define LDDFR_COLOR_MASK 0x7F
-#define LDSMR 0x406
-#define LDSMR_ROT (1 << 13)
-#define LDSARU 0x408
-#define LDSARL 0x40c
-#define LDLAOR 0x410
-#define LDPALCR 0x412
-#define LDPALCR_PALS (1 << 4)
-#define LDPALCR_PALEN (1 << 0)
-#define LDHCNR 0x414
-#define LDHSYNR 0x416
-#define LDVDLNR 0x418
-#define LDVTLNR 0x41a
-#define LDVSYNR 0x41c
-#define LDACLNR 0x41e
-#define LDINTR 0x420
-#define LDPMMR 0x424
-#define LDPSPR 0x426
-#define LDCNTR 0x428
-#define LDCNTR_DON (1 << 0)
-#define LDCNTR_DON2 (1 << 4)
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define LDLIRNR 0x440
-/* LDINTR bit */
-# define LDINTR_MINTEN (1 << 15)
-# define LDINTR_FINTEN (1 << 14)
-# define LDINTR_VSINTEN (1 << 13)
-# define LDINTR_VEINTEN (1 << 12)
-# define LDINTR_MINTS (1 << 11)
-# define LDINTR_FINTS (1 << 10)
-# define LDINTR_VSINTS (1 << 9)
-# define LDINTR_VEINTS (1 << 8)
-# define VINT_START (LDINTR_VSINTEN)
-# define VINT_CHECK (LDINTR_VSINTS)
-#else
-/* LDINTR bit */
-# define LDINTR_VINTSEL (1 << 12)
-# define LDINTR_VINTE (1 << 8)
-# define LDINTR_VINTS (1 << 0)
-# define VINT_START (LDINTR_VINTSEL)
-# define VINT_CHECK (LDINTR_VINTS)
-#endif
-
-/* HSYNC polarity inversion */
-#define LDMTR_FLMPOL (1 << 15)
-
-/* VSYNC polarity inversion */
-#define LDMTR_CL1POL (1 << 14)
-
-/* DISPLAY-ENABLE polarity inversion */
-#define LDMTR_DISPEN_LOWACT (1 << 13)
-
-/* DISPLAY DATA BUS polarity inversion */
-#define LDMTR_DPOL_LOWACT (1 << 12)
-
-/* AC modulation signal enable */
-#define LDMTR_MCNT (1 << 10)
-
-/* Disable output of HSYNC during VSYNC period */
-#define LDMTR_CL1CNT (1 << 9)
-
-/* Disable output of VSYNC during VSYNC period */
-#define LDMTR_CL2CNT (1 << 8)
-
-/* Display types supported by the LCDC */
-#define LDMTR_STN_MONO_4 0x00
-#define LDMTR_STN_MONO_8 0x01
-#define LDMTR_STN_COLOR_4 0x08
-#define LDMTR_STN_COLOR_8 0x09
-#define LDMTR_STN_COLOR_12 0x0A
-#define LDMTR_STN_COLOR_16 0x0B
-#define LDMTR_DSTN_MONO_8 0x11
-#define LDMTR_DSTN_MONO_16 0x13
-#define LDMTR_DSTN_COLOR_8 0x19
-#define LDMTR_DSTN_COLOR_12 0x1A
-#define LDMTR_DSTN_COLOR_16 0x1B
-#define LDMTR_TFT_COLOR_16 0x2B
-
-/* framebuffer color layout */
-#define LDDFR_1BPP_MONO 0x00
-#define LDDFR_2BPP_MONO 0x01
-#define LDDFR_4BPP_MONO 0x02
-#define LDDFR_6BPP_MONO 0x04
-#define LDDFR_4BPP 0x0A
-#define LDDFR_8BPP 0x0C
-#define LDDFR_16BPP_RGB555 0x1D
-#define LDDFR_16BPP_RGB565 0x2D
-
-/* LCDC Pixclock sources */
-#define LCDC_CLKSRC_BUSCLOCK 0
-#define LCDC_CLKSRC_PERIPHERAL 1
-#define LCDC_CLKSRC_EXTERNAL 2
-
-#define LDICKR_CLKSRC(x) \
- (((x) & 3) << 12)
-
-/* LCDC pixclock input divider. Set to 1 at a minimum! */
-#define LDICKR_CLKDIV(x) \
- ((x) & 0x1f)
-
-struct sh7760fb_platdata {
-
- /* Set this member to a valid fb_videmode for the display you
- * wish to use. The following members must be initialized:
- * xres, yres, hsync_len, vsync_len, sync,
- * {left,right,upper,lower}_margin.
- * The driver uses the above members to calculate register values
- * and memory requirements. Other members are ignored but may
- * be used by other framebuffer layer components.
- */
- struct fb_videomode *def_mode;
-
- /* LDMTR includes display type and signal polarity. The
- * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
- * data above; however the polarities of the following signals
- * must be encoded in the ldmtr member:
- * Display Enable signal (default high-active) DISPEN_LOWACT
- * Display Data signals (default high-active) DPOL_LOWACT
- * AC Modulation signal (default off) MCNT
- * Hsync-During-Vsync suppression (default off) CL1CNT
- * Vsync-during-vsync suppression (default off) CL2CNT
- * NOTE: also set a display type!
- * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
- */
- u16 ldmtr;
-
- /* LDDFR controls framebuffer image format (depth, organization)
- * Use ONE of the LDDFR_?BPP_* macros!
- */
- u16 lddfr;
-
- /* LDPMMR and LDPSPR control the timing of the power signals
- * for the display. Please read the SH7760 Hardware Manual,
- * Chapters 30.3.17, 30.3.18 and 30.4.6!
- */
- u16 ldpmmr;
- u16 ldpspr;
-
- /* LDACLNR contains the line numbers after which the AC modulation
- * signal is to toggle. Set to ZERO for TFTs or displays which
- * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
- */
- u16 ldaclnr;
-
- /* LDICKR contains information on pixelclock source and config.
- * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
- * minimal value for CLKDIV() must be 1!.
- */
- u16 ldickr;
-
- /* set this member to 1 if you wish to use the LCDC's hardware
- * rotation function. This is limited to displays <= 320x200
- * pixels resolution!
- */
- int rotate; /* set to 1 to rotate 90 CCW */
-
- /* set this to 1 to suppress vsync irq use. */
- int novsync;
-
- /* blanking hook for platform. Set this if your platform can do
- * more than the LCDC in terms of blanking (e.g. disable clock
- * generator / backlight power supply / etc.
- */
- void (*blank) (int);
-};
-
-#endif /* _ASM_SH_SH7760FB_H */
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
deleted file mode 100644
index ab693b9824421d..00000000000000
--- a/arch/sh/include/asm/sh_bios.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BIOS_H
-#define __ASM_SH_BIOS_H
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-
-/*
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * C API to interface to the standard LinuxSH BIOS
- * usually from within the early stages of kernel boot.
- */
-extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_gdb_detach(void);
-
-extern void sh_bios_get_node_addr(unsigned char *node_addr);
-extern void sh_bios_shutdown(unsigned int how);
-
-extern void sh_bios_vbr_init(void);
-extern void sh_bios_vbr_reload(void);
-
-#else
-
-static inline void sh_bios_vbr_init(void) { }
-static inline void sh_bios_vbr_reload(void) { }
-
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h
deleted file mode 100644
index 6c580a644a78c6..00000000000000
--- a/arch/sh/include/asm/shmparam.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#ifndef __ASM_SH_SHMPARAM_H
-#define __ASM_SH_SHMPARAM_H
-
-/*
- * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
- * for everyone, and work out the specifics from the probed cache descriptor.
- */
-#define SHMLBA 0x4000 /* attach addr a multiple of this */
-
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h
deleted file mode 100644
index 35e4839d381e88..00000000000000
--- a/arch/sh/include/asm/siu.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * platform header for the SIU ASoC driver
- *
- * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#ifndef ASM_SIU_H
-#define ASM_SIU_H
-
-struct device;
-
-struct siu_platform {
- unsigned int dma_slave_tx_a;
- unsigned int dma_slave_rx_a;
- unsigned int dma_slave_tx_b;
- unsigned int dma_slave_rx_b;
-};
-
-#endif /* ASM_SIU_H */
diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
deleted file mode 100644
index 891f2f8f2fd03a..00000000000000
--- a/arch/sh/include/asm/smc37c93x.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMC37C93X_H
-#define __ASM_SH_SMC37C93X_H
-
-/*
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE 0x3f0
-#define IDE1_PRIMARY_BASE 0x1f0
-#define IDE1_SECONDARY_BASE 0x170
-#define PARPORT_PRIMARY_BASE 0x378
-#define COM1_PRIMARY_BASE 0x2f8
-#define COM2_PRIMARY_BASE 0x3f8
-#define RTC_PRIMARY_BASE 0x070
-#define KBC_PRIMARY_BASE 0x060
-#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
-
-/* Logical device number */
-#define LDN_FDC 0
-#define LDN_IDE1 1
-#define LDN_IDE2 2
-#define LDN_PARPORT 3
-#define LDN_COM1 4
-#define LDN_COM2 5
-#define LDN_RTC 6
-#define LDN_KBC 7
-#define LDN_AUXIO 8
-
-/* Configuration port and key */
-#define CONFIG_PORT 0x3f0
-#define INDEX_PORT CONFIG_PORT
-#define DATA_PORT 0x3f1
-#define CONFIG_ENTER 0x55
-#define CONFIG_EXIT 0xaa
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX 0x07
-#define POWER_CONTROL_INDEX 0x22
-#define ACTIVATE_INDEX 0x30
-#define IO_BASE_HI_INDEX 0x60
-#define IO_BASE_LO_INDEX 0x61
-#define IRQ_SELECT_INDEX 0x70
-#define DMA_SELECT_INDEX 0x74
-
-#define GPIO46_INDEX 0xc6
-#define GPIO47_INDEX 0xc7
-
-/* UART stuff. Only for debugging. */
-/* UART Register */
-
-#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
-#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
-#define UART_IER 0x2 /* Interrupt Enable Register */
-#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
-#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
-#define UART_LCR 0x6 /* Line Control Register */
-#define UART_MCR 0x8 /* MODEM Control Register */
-#define UART_LSR 0xa /* Line Status Register */
-#define UART_MSR 0xc /* MODEM Status Register */
-#define UART_SCR 0xe /* Scratch Register */
-#define UART_DLL 0x0 /* Divisor Latch (LS) */
-#define UART_DLM 0x2 /* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
- volatile __u16 rbr;
- volatile __u16 ier;
- volatile __u16 iir;
- volatile __u16 lcr;
- volatile __u16 mcr;
- volatile __u16 lsr;
- volatile __u16 msr;
- volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr rbr
-#define tcr iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll rbr
-#define dlm ier
-#define fcr iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
-#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
-#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
-#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
-#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
-#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
-#define IIR_FIFO 0xc000 /* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN 0x0100 /* FIFO enable */
-#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
-#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
-#define FCR_DMA 0x0800 /* DMA mode select */
-#define FCR_RTL 0x4000 /* Receiver trigger (LSB) */
-#define FCR_RTM 0x8000 /* Receiver trigger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
-#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
-#define LCR_STB 0x0400 /* Number of Stop Bits */
-#define LCR_PEN 0x0800 /* Parity Enable */
-#define LCR_EPS 0x1000 /* Even Parity Select */
-#define LCR_SP 0x2000 /* Stick Parity */
-#define LCR_SB 0x4000 /* Set Break */
-#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR 0x0100 /* Data Terminal Ready */
-#define MCR_RTS 0x0200 /* Request to Send */
-#define MCR_OUT1 0x0400 /* Out 1 */
-#define MCR_IRQEN 0x0800 /* IRQ Enable */
-#define MCR_LOOP 0x1000 /* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR 0x0100 /* Data Ready */
-#define LSR_OE 0x0200 /* Overrun Error */
-#define LSR_PE 0x0400 /* Parity Error */
-#define LSR_FE 0x0800 /* Framing Error */
-#define LSR_BI 0x1000 /* Break Interrupt */
-#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
-#define LSR_TEMT 0x4000 /* Transmitter Empty */
-#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS 0x0100 /* Delta Clear to Send */
-#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
-#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
-#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
-#define MSR_CTS 0x1000 /* Clear to Send */
-#define MSR_DSR 0x2000 /* Data Set Ready */
-#define MSR_RI 0x4000 /* Ring Indicator */
-#define MSR_DCD 0x8000 /* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK (1843200) /* 1.8432 MHz */
-#define UART_BAUD(x) (UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-#define RTC_FREQ_SELECT 10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only. */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL 11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif /* __ASM_SH_SMC37C93X_H */
diff --git a/arch/sh/include/asm/smp-ops.h b/arch/sh/include/asm/smp-ops.h
deleted file mode 100644
index e27702130eb6f3..00000000000000
--- a/arch/sh/include/asm/smp-ops.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_OPS_H
-#define __ASM_SH_SMP_OPS_H
-
-struct plat_smp_ops {
- void (*smp_setup)(void);
- unsigned int (*smp_processor_id)(void);
- void (*prepare_cpus)(unsigned int max_cpus);
- void (*start_cpu)(unsigned int cpu, unsigned long entry_point);
- void (*send_ipi)(unsigned int cpu, unsigned int message);
- int (*cpu_disable)(unsigned int cpu);
- void (*cpu_die)(unsigned int cpu);
- void (*play_dead)(void);
-};
-
-extern struct plat_smp_ops *mp_ops;
-extern struct plat_smp_ops shx3_smp_ops;
-
-#ifdef CONFIG_SMP
-
-static inline void plat_smp_setup(void)
-{
- BUG_ON(!mp_ops);
- mp_ops->smp_setup();
-}
-
-static inline void play_dead(void)
-{
- mp_ops->play_dead();
-}
-
-extern void register_smp_ops(struct plat_smp_ops *ops);
-
-#else
-
-static inline void plat_smp_setup(void)
-{
- /* UP, nothing to do ... */
-}
-
-static inline void register_smp_ops(struct plat_smp_ops *ops)
-{
-}
-
-static inline void play_dead(void)
-{
- BUG();
-}
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_OPS_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
deleted file mode 100644
index 199381f77293c7..00000000000000
--- a/arch/sh/include/asm/smp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_H
-#define __ASM_SH_SMP_H
-
-#include <linux/bitops.h>
-#include <linux/cpumask.h>
-#include <asm/smp-ops.h>
-
-#ifdef CONFIG_SMP
-
-#include <linux/atomic.h>
-#include <asm/current.h>
-#include <asm/percpu.h>
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-/* Map from cpu id to sequential logical cpu number. */
-extern int __cpu_number_map[NR_CPUS];
-#define cpu_number_map(cpu) __cpu_number_map[cpu]
-
-/* The reverse map from sequential logical cpu number to cpu id. */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
-
-enum {
- SMP_MSG_FUNCTION,
- SMP_MSG_RESCHEDULE,
- SMP_MSG_FUNCTION_SINGLE,
- SMP_MSG_TIMER,
-
- SMP_MSG_NR, /* must be last */
-};
-
-DECLARE_PER_CPU(int, cpu_state);
-
-void smp_message_recv(unsigned int msg);
-
-void arch_send_call_function_single_ipi(int cpu);
-void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-void native_play_dead(void);
-void native_cpu_die(unsigned int cpu);
-int native_cpu_disable(unsigned int cpu);
-
-#ifdef CONFIG_HOTPLUG_CPU
-void play_dead_common(void);
-extern int __cpu_disable(void);
-
-static inline void __cpu_die(unsigned int cpu)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- mp_ops->cpu_die(cpu);
-}
-#endif
-
-static inline int hard_smp_processor_id(void)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- if (!mp_ops)
- return 0; /* boot CPU */
-
- return mp_ops->smp_processor_id();
-}
-
-struct of_cpu_method {
- const char *method;
- struct plat_smp_ops *ops;
-};
-
-#define CPU_METHOD_OF_DECLARE(name, _method, _ops) \
- static const struct of_cpu_method __cpu_method_of_table_##name \
- __used __section("__cpu_method_of_table") \
- = { .method = _method, .ops = _ops }
-
-#else
-
-#define hard_smp_processor_id() (0)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_H */
diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h
deleted file mode 100644
index 4703cbe2384481..00000000000000
--- a/arch/sh/include/asm/sparsemem.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPARSEMEM_H
-#define __ASM_SH_SPARSEMEM_H
-
-/*
- * SECTION_SIZE_BITS 2^N: how big each section will be
- * MAX_PHYSMEM_BITS 2^N: how much physical address space we have
- */
-#define SECTION_SIZE_BITS 26
-#define MAX_PHYSMEM_BITS 32
-
-#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h
deleted file mode 100644
index 6780753bd24914..00000000000000
--- a/arch/sh/include/asm/spi.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SPI_H__
-#define __ASM_SPI_H__
-
-struct sh_spi_info;
-
-struct sh_spi_info {
- int bus_num;
- int num_chipselect;
-
- void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
-};
-
-#endif /* __ASM_SPI_H__ */
diff --git a/arch/sh/include/asm/spinlock-cas.h b/arch/sh/include/asm/spinlock-cas.h
deleted file mode 100644
index 3d49985ebf41c9..00000000000000
--- a/arch/sh/include/asm/spinlock-cas.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-cas.h
- *
- * Copyright (C) 2015 SEI
- */
-#ifndef __ASM_SH_SPINLOCK_CAS_H
-#define __ASM_SH_SPINLOCK_CAS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-static inline unsigned __sl_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- while (!__sl_cas(&lock->lock, 1, 0));
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- __sl_cas(&lock->lock, 0, 1);
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- return __sl_cas(&lock->lock, 1, 0);
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (!old || __sl_cas(&rw->lock, old, old-1) != old);
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (__sl_cas(&rw->lock, old, old+1) != old);
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- while (__sl_cas(&rw->lock, RW_LOCK_BIAS, 0) != RW_LOCK_BIAS);
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __sl_cas(&rw->lock, 0, RW_LOCK_BIAS);
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (old && __sl_cas(&rw->lock, old, old-1) != old);
- return !!old;
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- return __sl_cas(&rw->lock, RW_LOCK_BIAS, 0) == RW_LOCK_BIAS;
-}
-
-#endif /* __ASM_SH_SPINLOCK_CAS_H */
diff --git a/arch/sh/include/asm/spinlock-llsc.h b/arch/sh/include/asm/spinlock-llsc.h
deleted file mode 100644
index 7fd929cd2e7a08..00000000000000
--- a/arch/sh/include/asm/spinlock-llsc.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-llsc.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_LLSC_H
-#define __ASM_SH_SPINLOCK_LLSC_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-/*
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
- unsigned long oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_lock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "cmp/pl %1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
-
- /* This could be optimised with ARCH_HAS_MMIOWB */
- mmiowb();
- __asm__ __volatile__ (
- "mov #1, %0 ! arch_spin_unlock \n\t"
- "mov.l %0, @%1 \n\t"
- : "=&z" (tmp)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_trylock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-
- return oldval;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_lock \n\t"
- "cmp/pl %0 \n\t"
- "bf 1b \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_unlock \n\t"
- "add #1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_write_lock \n\t"
- "cmp/hs %2, %0 \n\t"
- "bf 1b \n\t"
- "sub %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __asm__ __volatile__ (
- "mov.l %1, @%0 ! arch_write_unlock \n\t"
- :
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_read_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/pl %0 \n\t"
- "bf 2f \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "2: \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-
- return (oldval > 0);
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_write_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/hs %3, %0 \n\t"
- "bf 2f \n\t"
- "sub %3, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-
- return (oldval > (RW_LOCK_BIAS - 1));
-}
-
-#endif /* __ASM_SH_SPINLOCK_LLSC_H */
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
deleted file mode 100644
index fa6801f63551ce..00000000000000
--- a/arch/sh/include/asm/spinlock.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_H
-#define __ASM_SH_SPINLOCK_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/spinlock-llsc.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/spinlock-cas.h>
-#else
-#error "The configured cpu type does not support spinlocks"
-#endif
-
-#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
deleted file mode 100644
index 907bda4b1619a9..00000000000000
--- a/arch/sh/include/asm/spinlock_types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPINLOCK_TYPES_H
-#define __ASM_SH_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
- volatile unsigned int lock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { 1 }
-
-typedef struct {
- volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define RW_LOCK_BIAS 0x01000000
-#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-
-#endif
diff --git a/arch/sh/include/asm/sram.h b/arch/sh/include/asm/sram.h
deleted file mode 100644
index c125cf2198683e..00000000000000
--- a/arch/sh/include/asm/sram.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SRAM_H
-#define __ASM_SRAM_H
-
-#ifdef CONFIG_HAVE_SRAM_POOL
-
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-
-/* arch/sh/mm/sram.c */
-extern struct gen_pool *sram_pool;
-
-static inline unsigned long sram_alloc(size_t len)
-{
- if (!sram_pool)
- return 0UL;
-
- return gen_pool_alloc(sram_pool, len);
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
- return gen_pool_free(sram_pool, addr, len);
-}
-
-#else
-
-static inline unsigned long sram_alloc(size_t len)
-{
- return 0;
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
-}
-
-#endif /* CONFIG_HAVE_SRAM_POOL */
-
-#endif /* __ASM_SRAM_H */
diff --git a/arch/sh/include/asm/stackprotector.h b/arch/sh/include/asm/stackprotector.h
deleted file mode 100644
index 665dafac376f8d..00000000000000
--- a/arch/sh/include/asm/stackprotector.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STACKPROTECTOR_H
-#define __ASM_SH_STACKPROTECTOR_H
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
- unsigned long canary = get_random_canary();
-
- current->stack_canary = canary;
- __stack_chk_guard = current->stack_canary;
-}
-
-#endif /* __ASM_SH_STACKPROTECTOR_H */
diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
deleted file mode 100644
index 4f98cdc64ec59b..00000000000000
--- a/arch/sh/include/asm/stacktrace.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based on:
- * The x86 implementation - arch/x86/include/asm/stacktrace.h
- */
-#ifndef _ASM_SH_STACKTRACE_H
-#define _ASM_SH_STACKTRACE_H
-
-/* Generic stack tracer with callbacks */
-
-struct stacktrace_ops {
- void (*address)(void *data, unsigned long address, int reliable);
-};
-
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
- unsigned long *stack,
- const struct stacktrace_ops *ops, void *data);
-
-#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
deleted file mode 100644
index 0f6331ec28ed4e..00000000000000
--- a/arch/sh/include/asm/string.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/string_32.h>
diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h
deleted file mode 100644
index a276b193d3b4fd..00000000000000
--- a/arch/sh/include/asm/string_32.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STRING_H
-#define __ASM_SH_STRING_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * But consider these trivial functions to be public domain.
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char *strcpy(char *__dest, const char *__src)
-{
- register char *__xdest = __dest;
- unsigned long __dummy;
-
- __asm__ __volatile__("1:\n\t"
- "mov.b @%1+, %2\n\t"
- "mov.b %2, @%0\n\t"
- "cmp/eq #0, %2\n\t"
- "bf/s 1b\n\t"
- " add #1, %0\n\t"
- : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
- : "0" (__dest), "1" (__src)
- : "memory", "t");
-
- return __xdest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *__cs, const char *__ct)
-{
- register int __res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq #0, %3\n\t"
- "bt 2f\n\t"
- "cmp/eq %2, %3\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n\t"
- "sub %3, %2\n"
- "2:"
- : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
-{
- register int __res;
- unsigned long __dummy;
-
- if (__n == 0)
- return 0;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq %6, %0\n\t"
- "bt/s 2f\n\t"
- " cmp/eq #0, %3\n\t"
- "bt/s 3f\n\t"
- " cmp/eq %3, %2\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n"
- "2:\n\t"
- "sub %3, %2\n"
- "3:"
- :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct), "r" (__cs+__n)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *__s, int __c, size_t __n);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#endif /* __ASM_SH_STRING_H */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
deleted file mode 100644
index 47db17520261e8..00000000000000
--- a/arch/sh/include/asm/suspend.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_SUSPEND_H
-#define _ASM_SH_SUSPEND_H
-
-#ifndef __ASSEMBLY__
-#include <linux/notifier.h>
-
-#include <asm/ptrace.h>
-
-struct swsusp_arch_regs {
- struct pt_regs user_regs;
- unsigned long bank1_regs[8];
-};
-
-void sh_mobile_call_standby(unsigned long mode);
-
-#ifdef CONFIG_CPU_IDLE
-int sh_mobile_setup_cpuidle(void);
-#else
-static inline int sh_mobile_setup_cpuidle(void) { return 0; }
-#endif
-
-/* notifier chains for pre/post sleep hooks */
-extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
-extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
-
-/* priority levels for notifiers */
-#define SH_MOBILE_SLEEP_BOARD 0
-#define SH_MOBILE_SLEEP_CPU 1
-#define SH_MOBILE_PRE(x) (x)
-#define SH_MOBILE_POST(x) (-(x))
-
-/* board code registration function for self-refresh assembly snippets */
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end);
-
-/* register structure for address/data information */
-struct sh_sleep_regs {
- unsigned long stbcr;
- unsigned long bar;
-
- /* MMU */
- unsigned long pteh;
- unsigned long ptel;
- unsigned long ttb;
- unsigned long tea;
- unsigned long mmucr;
- unsigned long ptea;
- unsigned long pascr;
- unsigned long irmcr;
-
- /* Cache */
- unsigned long ccr;
- unsigned long ramcr;
-};
-
-/* data area for low-level sleep code */
-struct sh_sleep_data {
- /* current sleep mode (SUSP_SH_...) */
- unsigned long mode;
-
- /* addresses of board specific self-refresh snippets */
- unsigned long sf_pre;
- unsigned long sf_post;
-
- /* address of resume code */
- unsigned long resume;
-
- /* register state saved and restored by the assembly code */
- unsigned long vbr;
- unsigned long spc;
- unsigned long sr;
- unsigned long sp;
-
- /* structure for keeping register addresses */
- struct sh_sleep_regs addr;
-
- /* structure for saving/restoring register state */
- struct sh_sleep_regs data;
-};
-
-/* a bitmap of supported sleep modes (SUSP_SH..) */
-extern unsigned long sh_mobile_sleep_supported;
-
-#endif
-
-/* flags passed to assembly suspend code */
-#define SUSP_SH_SLEEP (1 << 0) /* Regular sleep mode */
-#define SUSP_SH_STANDBY (1 << 1) /* SH-Mobile Software standby mode */
-#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */
-#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
-#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
-#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */
-#define SUSP_SH_REGS (1 << 6) /* Save/restore registers */
-
-#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h
deleted file mode 100644
index bd139bcdeec142..00000000000000
--- a/arch/sh/include/asm/switch_to.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <asm/switch_to_32.h>
diff --git a/arch/sh/include/asm/switch_to_32.h b/arch/sh/include/asm/switch_to_32.h
deleted file mode 100644
index 9c93fb91adb4aa..00000000000000
--- a/arch/sh/include/asm/switch_to_32.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SWITCH_TO_32_H
-#define __ASM_SH_SWITCH_TO_32_H
-
-#ifdef CONFIG_SH_DSP
-
-#define is_dsp_enabled(tsk) \
- (!!(tsk->thread.dsp_status.status & SR_DSP))
-
-#define __restore_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status; \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "movs.l @r2+, a0\n\t" \
- "movs.l @r2+, a1\n\t" \
- "movs.l @r2+, a0g\n\t" \
- "movs.l @r2+, a1g\n\t" \
- "movs.l @r2+, m0\n\t" \
- "movs.l @r2+, m1\n\t" \
- "movs.l @r2+, x0\n\t" \
- "movs.l @r2+, x1\n\t" \
- "movs.l @r2+, y0\n\t" \
- "movs.l @r2+, y1\n\t" \
- "lds.l @r2+, dsr\n\t" \
- "ldc.l @r2+, rs\n\t" \
- "ldc.l @r2+, re\n\t" \
- "ldc.l @r2+, mod\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#define __save_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status + 14; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l mod, @-r2\n\t" \
- "stc.l re, @-r2\n\t" \
- "stc.l rs, @-r2\n\t" \
- "sts.l dsr, @-r2\n\t" \
- "movs.l y1, @-r2\n\t" \
- "movs.l y0, @-r2\n\t" \
- "movs.l x1, @-r2\n\t" \
- "movs.l x0, @-r2\n\t" \
- "movs.l m1, @-r2\n\t" \
- "movs.l m0, @-r2\n\t" \
- "movs.l a1g, @-r2\n\t" \
- "movs.l a0g, @-r2\n\t" \
- "movs.l a1, @-r2\n\t" \
- "movs.l a0, @-r2\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#else
-
-#define is_dsp_enabled(tsk) (0)
-#define __save_dsp(tsk) do { } while (0)
-#define __restore_dsp(tsk) do { } while (0)
-#endif
-
-struct task_struct *__switch_to(struct task_struct *prev,
- struct task_struct *next);
-
-/*
- * switch_to() should switch tasks to task nr n, first
- */
-#define switch_to(prev, next, last) \
-do { \
- register u32 *__ts1 __asm__ ("r1"); \
- register u32 *__ts2 __asm__ ("r2"); \
- register u32 *__ts4 __asm__ ("r4"); \
- register u32 *__ts5 __asm__ ("r5"); \
- register u32 *__ts6 __asm__ ("r6"); \
- register u32 __ts7 __asm__ ("r7"); \
- struct task_struct *__last; \
- \
- if (is_dsp_enabled(prev)) \
- __save_dsp(prev); \
- if (is_dsp_enabled(next)) \
- __restore_dsp(next); \
- \
- __ts1 = (u32 *)&prev->thread.sp; \
- __ts2 = (u32 *)&prev->thread.pc; \
- __ts4 = (u32 *)prev; \
- __ts5 = (u32 *)next; \
- __ts6 = (u32 *)&next->thread.sp; \
- __ts7 = next->thread.pc; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l gbr, @-r15\n\t" \
- "sts.l pr, @-r15\n\t" \
- "mov.l r8, @-r15\n\t" \
- "mov.l r9, @-r15\n\t" \
- "mov.l r10, @-r15\n\t" \
- "mov.l r11, @-r15\n\t" \
- "mov.l r12, @-r15\n\t" \
- "mov.l r13, @-r15\n\t" \
- "mov.l r14, @-r15\n\t" \
- "mov.l r15, @r1\t! save SP\n\t" \
- "mov.l @r6, r15\t! change to new stack\n\t" \
- "mova 1f, %0\n\t" \
- "mov.l %0, @r2\t! save PC\n\t" \
- "mov.l 2f, %0\n\t" \
- "jmp @%0\t! call __switch_to\n\t" \
- " lds r7, pr\t! with return to new PC\n\t" \
- ".balign 4\n" \
- "2:\n\t" \
- ".long __switch_to\n" \
- "1:\n\t" \
- "mov.l @r15+, r14\n\t" \
- "mov.l @r15+, r13\n\t" \
- "mov.l @r15+, r12\n\t" \
- "mov.l @r15+, r11\n\t" \
- "mov.l @r15+, r10\n\t" \
- "mov.l @r15+, r9\n\t" \
- "mov.l @r15+, r8\n\t" \
- "lds.l @r15+, pr\n\t" \
- "ldc.l @r15+, gbr\n\t" \
- : "=z" (__last) \
- : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
- "r" (__ts5), "r" (__ts6), "r" (__ts7) \
- : "r3", "t"); \
- \
- last = __last; \
-} while (0)
-
-#endif /* __ASM_SH_SWITCH_TO_32_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
deleted file mode 100644
index 570699eb0e58ae..00000000000000
--- a/arch/sh/include/asm/syscall.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_H
-#define __ASM_SH_SYSCALL_H
-
-extern const unsigned long sys_call_table[];
-
-#include <asm/syscall_32.h>
-
-#endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
deleted file mode 100644
index d87738eebe30cb..00000000000000
--- a/arch/sh/include/asm/syscall_32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_32_H
-#define __ASM_SH_SYSCALL_32_H
-
-#include <uapi/linux/audit.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <asm/ptrace.h>
-
-/* The system call number is given by the user in R3 */
-static inline long syscall_get_nr(struct task_struct *task,
- struct pt_regs *regs)
-{
- return (regs->tra >= 0) ? regs->regs[3] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
- struct pt_regs *regs)
-{
- /*
- * XXX: This needs some thought. On SH we don't
- * save away the original r0 value anywhere.
- */
-}
-
-static inline long syscall_get_error(struct task_struct *task,
- struct pt_regs *regs)
-{
- return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
- struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
- struct pt_regs *regs,
- int error, long val)
-{
- regs->regs[0] = (long) error ?: val;
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *args)
-{
-
- /* Argument pattern is: R4, R5, R6, R7, R0, R1 */
- args[5] = regs->regs[1];
- args[4] = regs->regs[0];
- args[3] = regs->regs[7];
- args[2] = regs->regs[6];
- args[1] = regs->regs[5];
- args[0] = regs->regs[4];
-}
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
- int arch = AUDIT_ARCH_SH;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- arch |= __AUDIT_ARCH_LE;
-#endif
- return arch;
-}
-#endif /* __ASM_SH_SYSCALL_32_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
deleted file mode 100644
index 387105316d2882..00000000000000
--- a/arch/sh/include/asm/syscalls.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_H
-#define __ASM_SH_SYSCALLS_H
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off);
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-#include <asm/syscalls_32.h>
-
-#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
deleted file mode 100644
index 5c555b864fe092..00000000000000
--- a/arch/sh/include/asm/syscalls_32.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_32_H
-#define __ASM_SH_SYSCALLS_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-struct pt_regs;
-
-asmlinkage int sys_sigreturn(void);
-asmlinkage int sys_rt_sigreturn(void);
-asmlinkage int sys_sh_pipe(void);
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice);
-
-/* Misc syscall related bits */
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags);
-
-#endif /* __ASM_SH_SYSCALLS_32_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
deleted file mode 100644
index 1400fbb8b423b9..00000000000000
--- a/arch/sh/include/asm/thread_info.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002 Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#include <asm/page.h>
-
-/*
- * Page fault error code bits
- */
-#define FAULT_CODE_WRITE (1 << 0) /* write access */
-#define FAULT_CODE_INITIAL (1 << 1) /* initial page write */
-#define FAULT_CODE_ITLB (1 << 2) /* ITLB miss */
-#define FAULT_CODE_PROT (1 << 3) /* protection fault */
-#define FAULT_CODE_USER (1 << 4) /* user-mode access */
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- unsigned long flags; /* low level flags */
- __u32 status; /* thread synchronous flags */
- __u32 cpu;
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- unsigned long previous_sp; /* sp of previous stack in case
- of nested IRQ stacks */
- __u8 supervisor_stack[];
-};
-
-#endif
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SHIFT 12
-#else
-#define THREAD_SHIFT 13
-#endif
-
-#define THREAD_SIZE (1 << THREAD_SHIFT)
-#define STACK_WARN (THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .flags = 0, \
- .status = 0, \
- .cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
-}
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-#if defined(CONFIG_CPU_HAS_SR_RB)
- __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti));
-#else
- unsigned long __dummy;
-
- __asm__ __volatile__ (
- "mov r15, %0\n\t"
- "and %1, %0\n\t"
- : "=&r" (ti), "=r" (__dummy)
- : "1" (~(THREAD_SIZE - 1))
- : "memory");
-#endif
-
- return ti;
-}
-
-#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
-
-extern void arch_task_cache_init(void);
-extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
-extern void arch_release_task_struct(struct task_struct *tsk);
-extern void init_thread_xstate(void);
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Thread information flags
- *
- * - Limited to 24 bits, upper byte used for fault code encoding.
- *
- * - _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or
- * we blow the tst immediate size constraints and need to fix up
- * arch/sh/kernel/entry-common.S.
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_NOTIFY_SIGNAL 3 /* signal notifications exist */
-#define TIF_SINGLESTEP 4 /* singlestepping active */
-#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
-#define TIF_SECCOMP 6 /* secure computing */
-#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */
-#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-
-/* work to do in syscall trace */
-#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
- _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
- _TIF_SYSCALL_TRACEPOINT)
-
-/* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
- _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
- _TIF_SYSCALL_TRACEPOINT | _TIF_NOTIFY_SIGNAL)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
- _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0002 /* FPU used by this task this quantum */
-
-#ifndef __ASSEMBLY__
-
-#define TI_FLAG_FAULT_CODE_SHIFT 24
-
-/*
- * Additional thread flag encoding
- */
-static inline void set_thread_fault_code(unsigned int val)
-{
- struct thread_info *ti = current_thread_info();
- ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
- | (val << TI_FLAG_FAULT_CODE_SHIFT);
-}
-
-static inline unsigned int get_thread_fault_code(void)
-{
- struct thread_info *ti = current_thread_info();
- return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
-}
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
deleted file mode 100644
index f53f95bf42887f..00000000000000
--- a/arch/sh/include/asm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/include/asm-sh/timex.h
- *
- * sh architecture timex specifications
- */
-#ifndef __ASM_SH_TIMEX_H
-#define __ASM_SH_TIMEX_H
-
-/*
- * Only parts using the legacy CPG code for their clock framework
- * implementation need to define their own Pclk value. If provided, this
- * can be used for accurately setting CLOCK_TICK_RATE, otherwise we
- * simply fall back on the i8253 PIT value.
- */
-#ifdef CONFIG_SH_PCLK_FREQ
-#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
-#else
-#define CLOCK_TICK_RATE 1193180
-#endif
-
-#include <asm-generic/timex.h>
-
-#endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
deleted file mode 100644
index aeb8915e925496..00000000000000
--- a/arch/sh/include/asm/tlb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLB_H
-#define __ASM_SH_TLB_H
-
-#ifndef __ASSEMBLY__
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#ifdef CONFIG_MMU
-#include <linux/swap.h>
-
-#if defined(CONFIG_CPU_SH4)
-extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
-extern void tlb_unwire_entry(void);
-#else
-static inline void tlb_wire_entry(struct vm_area_struct *vma ,
- unsigned long addr, pte_t pte)
-{
- BUG();
-}
-
-static inline void tlb_unwire_entry(void)
-{
- BUG();
-}
-#endif /* CONFIG_CPU_SH4 */
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_H */
diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h
deleted file mode 100644
index 8f180cd3bcd638..00000000000000
--- a/arch/sh/include/asm/tlbflush.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLBFLUSH_H
-#define __ASM_SH_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- * - flush_tlb_all() flushes all processes TLBs
- * - flush_tlb_mm(mm) flushes the specified mm context TLB's
- * - flush_tlb_page(vma, vmaddr) flushes one page
- * - flush_tlb_range(vma, start, end) flushes a range of pages
- * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-extern void local_flush_tlb_all(void);
-extern void local_flush_tlb_mm(struct mm_struct *mm);
-extern void local_flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_page(struct vm_area_struct *vma,
- unsigned long page);
-extern void local_flush_tlb_kernel_range(unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
-
-extern void __flush_tlb_global(void);
-
-#ifdef CONFIG_SMP
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-extern void flush_tlb_one(unsigned long asid, unsigned long page);
-
-#else
-
-#define flush_tlb_all() local_flush_tlb_all()
-#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
-#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page)
-
-#define flush_tlb_range(vma, start, end) \
- local_flush_tlb_range(vma, start, end)
-
-#define flush_tlb_kernel_range(start, end) \
- local_flush_tlb_kernel_range(start, end)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
deleted file mode 100644
index 1db470e024565b..00000000000000
--- a/arch/sh/include/asm/topology.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_TOPOLOGY_H
-#define _ASM_SH_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#define cpu_to_node(cpu) ((void)(cpu),0)
-
-#define cpumask_of_node(node) ((void)node, cpu_online_mask)
-
-#define pcibus_to_node(bus) ((void)(bus), -1)
-#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
- cpu_all_mask : \
- cpumask_of_node(pcibus_to_node(bus)))
-
-#endif
-
-#define mc_capable() (1)
-
-const struct cpumask *cpu_coregroup_mask(int cpu);
-
-extern cpumask_t cpu_core_map[NR_CPUS];
-
-#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h
deleted file mode 100644
index ba831bc7e08f5d..00000000000000
--- a/arch/sh/include/asm/traps.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_H
-#define __ASM_SH_TRAPS_H
-
-#include <linux/compiler.h>
-
-# include <asm/traps_32.h>
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(breakpoint);
-BUILD_TRAP_HANDLER(singlestep);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-BUILD_TRAP_HANDLER(nmi);
-
-#endif /* __ASM_SH_TRAPS_H */
diff --git a/arch/sh/include/asm/traps_32.h b/arch/sh/include/asm/traps_32.h
deleted file mode 100644
index 8c5bbb7b6053cf..00000000000000
--- a/arch/sh/include/asm/traps_32.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_32_H
-#define __ASM_SH_TRAPS_32_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-
-#ifdef CONFIG_CPU_HAS_SR_RB
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- \
- __asm__ __volatile__ ( \
- "stc r2_bank, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#else
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- __asm__ __volatile__ ( \
- "mov r4, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#endif
-
-static inline void trigger_address_error(void)
-{
- __asm__ __volatile__ (
- "ldc %0, sr\n\t"
- "mov.l @%1, %0"
- :
- : "r" (0x10000000), "r" (0x80000001)
- );
-}
-
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address);
-asmlinkage void do_divide_error(unsigned long r4);
-asmlinkage void do_reserved_inst(void);
-asmlinkage void do_illegal_slot_inst(void);
-asmlinkage void do_exception_error(void);
-
-#define BUILD_TRAP_HANDLER(name) \
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \
- unsigned long r6, unsigned long r7, \
- struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL \
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \
- unsigned int vec = regs->tra; \
- (void)vec;
-
-#endif /* __ASM_SH_TRAPS_32_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
deleted file mode 100644
index 68eb24ad201383..00000000000000
--- a/arch/sh/include/asm/types.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TYPES_H
-#define __ASM_SH_TYPES_H
-
-#include <uapi/asm/types.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifndef __ASSEMBLY__
-
-typedef u16 insn_size_t;
-typedef u32 reg_size_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
deleted file mode 100644
index a79609eb14be43..00000000000000
--- a/arch/sh/include/asm/uaccess.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#include <asm/extable.h>
-#include <asm-generic/access_ok.h>
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err = -EFAULT; \
- unsigned long __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- if (likely(access_ok(__gu_addr, (size)))) \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- __chk_user_ptr(ptr); \
- __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
- __pu_err; \
-})
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- if (likely(access_ok(__pu_addr, size))) \
- __put_user_size(__pu_val, __pu_addr, (size), \
- __pu_err); \
- __pu_err; \
-})
-
-# include <asm/uaccess_32.h>
-
-extern long strncpy_from_user(char *dest, const char __user *src, long count);
-
-extern __must_check long strnlen_user(const char __user *str, long n);
-
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-static __always_inline unsigned long
-raw_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-raw_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return __copy_user((__force void *)to, from, n);
-}
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure. Usually it's 0.)
- */
-__kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) \
-({ \
- void __user * __cl_addr = (addr); \
- unsigned long __cl_size = (n); \
- \
- if (__cl_size && access_ok(__cl_addr, __cl_size)) \
- __cl_size = __clear_user(__cl_addr, __cl_size); \
- \
- __cl_size; \
-})
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
- return set_exception_table_vec(evt >> 5, handler);
-}
-
-struct mem_access {
- unsigned long (*from)(void *dst, const void __user *src, unsigned long cnt);
- unsigned long (*to)(void __user *dst, const void *src, unsigned long cnt);
-};
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int, unsigned long address);
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
deleted file mode 100644
index 5d7ddc092afd77..00000000000000
--- a/arch/sh/include/asm/uaccess_32.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __get_user_u64(x, ptr, retval); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov." insn " %2, %1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0, %1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %1, %0\n\t" \
- : "=&r" (x) \
- : "m" (__m(addr)) \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-extern void __get_user_unknown(void);
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%R1\n\t" \
- "mov.l %T2,%S1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%R1\n\t" \
- "mov #0,%S1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%S1\n\t" \
- "mov.l %T2,%R1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%S1\n\t" \
- "mov #0,%R1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#endif
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __put_user_u64(x, ptr, retval); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "1:\n\t" \
- "mov." insn " %1, %2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \
- "0" (err) \
- : "memory" \
- ); \
-} while (0)
-#else
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %0, %1\n\t" \
- : /* no outputs */ \
- : "r" (x), "m" (__m(addr)) \
- : "memory" \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %R1,%2\n\t" \
- "mov.l %S1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %S1,%2\n\t" \
- "mov.l %R1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
deleted file mode 100644
index e7f68ec61014c3..00000000000000
--- a/arch/sh/include/asm/uncached.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UNCACHED_H
-#define __ASM_SH_UNCACHED_H
-
-#include <linux/bug.h>
-
-#ifdef CONFIG_UNCACHED_MAPPING
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-extern unsigned long uncached_start, uncached_end;
-
-extern int virt_addr_uncached(unsigned long kaddr);
-extern void uncached_init(void);
-extern void uncached_resize(unsigned long size);
-
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached() \
-do { \
- unsigned long __dummy; \
- \
- __asm__ __volatile__( \
- "mova 1f, %0\n\t" \
- "add %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1:" \
- : "=&z" (__dummy) \
- : "r" (cached_to_uncached)); \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached() \
-do { \
- unsigned long __dummy; \
- ctrl_barrier(); \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
-} while (0)
-#else
-#define virt_addr_uncached(kaddr) (0)
-#define uncached_init() do { } while (0)
-#define uncached_resize(size) BUG()
-#define jump_to_uncached() do { } while (0)
-#define back_to_cached() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
deleted file mode 100644
index d6e1262501368a..00000000000000
--- a/arch/sh/include/asm/unistd.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd_32.h>
-
-#define NR_syscalls __NR_syscalls
-
-# define __ARCH_WANT_NEW_STAT
-# define __ARCH_WANT_OLD_READDIR
-# define __ARCH_WANT_OLD_STAT
-# define __ARCH_WANT_STAT64
-# define __ARCH_WANT_SYS_ALARM
-# define __ARCH_WANT_SYS_GETHOSTNAME
-# define __ARCH_WANT_SYS_IPC
-# define __ARCH_WANT_SYS_PAUSE
-# define __ARCH_WANT_SYS_SIGNAL
-# define __ARCH_WANT_SYS_TIME32
-# define __ARCH_WANT_SYS_UTIME32
-# define __ARCH_WANT_SYS_WAITPID
-# define __ARCH_WANT_SYS_SOCKETCALL
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLD_UNAME
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_SYS_FORK
-# define __ARCH_WANT_SYS_VFORK
-# define __ARCH_WANT_SYS_CLONE
-
-#include <uapi/asm/unistd.h>
diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
deleted file mode 100644
index ce82c96c789904..00000000000000
--- a/arch/sh/include/asm/unwinder.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_UNWINDER_H
-#define _LINUX_UNWINDER_H
-
-#include <asm/stacktrace.h>
-
-struct unwinder {
- const char *name;
- struct list_head list;
- int rating;
- void (*dump)(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *, void *);
-};
-
-extern int unwinder_init(void);
-extern int unwinder_register(struct unwinder *);
-
-extern void unwind_stack(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-/*
- * Used by fault handling code to signal to the unwinder code that it
- * should switch to a different unwinder.
- */
-extern int unwinder_faulted;
-
-#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
deleted file mode 100644
index 12ea0f3f441991..00000000000000
--- a/arch/sh/include/asm/user.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_USER_H
-#define __ASM_SH_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd). The file contents are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-
-struct user_fpu_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-};
-
-struct user {
- struct pt_regs regs; /* entire machine state */
- struct user_fpu_struct fpu; /* Math Co-processor registers */
- int u_fpvalid; /* True if math co-processor being used */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#endif /* __ASM_SH_USER_H */
diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h
deleted file mode 100644
index 5b2057c39170ed..00000000000000
--- a/arch/sh/include/asm/vermagic.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef _ASM_VERMAGIC_H
-#define _ASM_VERMAGIC_H
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2LE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3LE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4LE "
-# else
-# error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2BE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3BE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4BE "
-# else
-# error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
-#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h
deleted file mode 100644
index 089fbdc6c0b1d0..00000000000000
--- a/arch/sh/include/asm/vga.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VGA_H
-#define __ASM_SH_VGA_H
-
-/* Stupid drivers. */
-
-#endif /* __ASM_SH_VGA_H */
diff --git a/arch/sh/include/asm/vmalloc.h b/arch/sh/include/asm/vmalloc.h
deleted file mode 100644
index 716b7747264658..00000000000000
--- a/arch/sh/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_SH_VMALLOC_H
-#define _ASM_SH_VMALLOC_H
-
-#endif /* _ASM_SH_VMALLOC_H */
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
deleted file mode 100644
index 8d96c4f9b35b88..00000000000000
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VMLINUX_LDS_H
-#define __ASM_SH_VMLINUX_LDS_H
-
-#include <asm-generic/vmlinux.lds.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-#define DWARF_EH_FRAME \
- .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { \
- __start_eh_frame = .; \
- *(.eh_frame) \
- __stop_eh_frame = .; \
- }
-#else
-#define DWARF_EH_FRAME
-#endif
-
-#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
deleted file mode 100644
index b9ca4c99f046a6..00000000000000
--- a/arch/sh/include/asm/watchdog.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Valentin Sitdikov
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#define WTCNT_HIGH 0x5a
-#define WTCSR_HIGH 0xa5
-
-#define WTCSR_CKS2 0x04
-#define WTCSR_CKS1 0x02
-#define WTCSR_CKS0 0x01
-
-#include <cpu/watchdog.h>
-
-/*
- * See cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-# define WTCNT_R WTCNT
-#endif
-
-#ifndef WTCSR_R
-# define WTCSR_R WTCSR
-#endif
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio Overflow Period
- * --------------------------------------------
- * 1/32 (initial value) 41 usecs
- * 1/64 82 usecs
- * 1/128 164 usecs
- * 1/256 328 usecs
- * 1/512 656 usecs
- * 1/1024 1.31 msecs
- * 1/2048 2.62 msecs
- * 1/4096 5.25 msecs
- */
-#define WTCSR_CKS_32 0x00
-#define WTCSR_CKS_64 0x01
-#define WTCSR_CKS_128 0x02
-#define WTCSR_CKS_256 0x03
-#define WTCSR_CKS_512 0x04
-#define WTCSR_CKS_1024 0x05
-#define WTCSR_CKS_2048 0x06
-#define WTCSR_CKS_4096 0x07
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u32 sh_wdt_read_cnt(void)
-{
- return __raw_readl(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u32 val)
-{
- __raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
-}
-
-/**
- * sh_wdt_write_bst - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_bst(__u32 val)
-{
- __raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
-}
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u32 sh_wdt_read_csr(void)
-{
- return __raw_readl(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u32 val)
-{
- __raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
-}
-#else
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
- return __raw_readb(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
- __raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
- return __raw_readb(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
- __raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
deleted file mode 100644
index 4aa398455b94ab..00000000000000
--- a/arch/sh/include/asm/word-at-a-time.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_WORD_AT_A_TIME_H
-#define __ASM_SH_WORD_AT_A_TIME_H
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-# include <asm-generic/word-at-a-time.h>
-#else
-/*
- * Little-endian version cribbed from x86.
- */
-struct word_at_a_time {
- const unsigned long one_bits, high_bits;
-};
-
-#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
-
-/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
-static inline long count_masked_bytes(long mask)
-{
- /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
- long a = (0x0ff0001+mask) >> 23;
- /* Fix the 1 for 00 case */
- return a & mask;
-}
-
-/* Return nonzero if it has a zero */
-static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
-{
- unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
- *bits = mask;
- return mask;
-}
-
-static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
-{
- return bits;
-}
-
-static inline unsigned long create_zero_mask(unsigned long bits)
-{
- bits = (bits - 1) & ~bits;
- return bits >> 7;
-}
-
-/* The mask we created is directly usable as a bytemask */
-#define zero_bytemask(mask) (mask)
-
-static inline unsigned long find_zero(unsigned long mask)
-{
- return count_masked_bytes(mask);
-}
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
deleted file mode 100644
index d8bf5d7d2fdf0a..00000000000000
--- a/arch/sh/include/cpu-common/cpu/addrspace.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Definitions for the address spaces of the SH-2 CPUs.
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_ADDRSPACE_H
-#define __ASM_CPU_SH2_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
deleted file mode 100644
index cef3a30dbf97c8..00000000000000
--- a/arch/sh/include/cpu-common/cpu/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/mmu_context.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
-#define __ASM_CPU_SH2_MMU_CONTEXT_H
-
-/* No MMU */
-
-#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-common/cpu/pfc.h b/arch/sh/include/cpu-common/cpu/pfc.h
deleted file mode 100644
index 879d2c9da537fa..00000000000000
--- a/arch/sh/include/cpu-common/cpu/pfc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#ifndef __ARCH_SH_CPU_PFC_H__
-#define __ARCH_SH_CPU_PFC_H__
-
-#include <linux/types.h>
-
-struct resource;
-
-int sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources);
-
-#endif /* __ARCH_SH_CPU_PFC_H__ */
diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
deleted file mode 100644
index 5fe726acd9f8f5..00000000000000
--- a/arch/sh/include/cpu-common/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2_RTC_H
-#define __ASM_SH_CPU_SH2_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES 0UL
-
-#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
deleted file mode 100644
index e005dd176ff211..00000000000000
--- a/arch/sh/include/cpu-common/cpu/sigcontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
-#define __ASM_CPU_SH2_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
deleted file mode 100644
index af51438755e003..00000000000000
--- a/arch/sh/include/cpu-common/cpu/timer.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_TIMER_H
-#define __ASM_CPU_SH2_TIMER_H
-
-/* Nothing needed yet */
-
-#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
deleted file mode 100644
index 070aa9f50d3f09..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/cache.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_CACHE_H
-#define __ASM_CPU_SH2_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define SH_CCR 0xffffffec
-
-#define CCR_CACHE_CE 0x01 /* Cache enable */
-#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */
- /* 0x00000000-0x7fffffff: Write-through */
- /* 0x80000000-0x9fffffff: Write-back */
- /* 0xc0000000-0xdfffffff: Write-through */
-#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */
- /* 0x00000000-0x7fffffff: Write-back */
- /* 0x80000000-0x9fffffff: Write-through */
- /* 0xc0000000-0xdfffffff: Write-back */
-#define CCR_CACHE_CF 0x08 /* Cache invalidate */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_DATA_ARRAY 0xf1000000
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif
-
-#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
deleted file mode 100644
index fb2e5d2831bc76..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/freq.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2_FREQ_H
-#define __ASM_CPU_SH2_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define FREQCR 0xf815ff80
-#endif
-
-#endif /* __ASM_CPU_SH2_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
deleted file mode 100644
index 141fe296d75168..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/watchdog.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_WATCHDOG_H
-#define __ASM_CPU_SH2_WATCHDOG_H
-
-/*
- * More SH-2 brilliance .. its not good enough that we can't read
- * and write the same sizes to WTCNT, now we have to read and write
- * with different sizes at different addresses for WTCNT _and_ RSTCSR.
- *
- * At least on the bright side no one has managed to screw over WTCSR
- * in this fashion .. yet.
- */
-/* Register definitions */
-#define WTCNT 0xfffffe80
-#define WTCSR 0xfffffe80
-#define RSTCSR 0xfffffe82
-
-#define WTCNT_R (WTCNT + 1)
-#define RSTCSR_R (RSTCSR + 1)
-
-/* Bit definitions */
-#define WTCSR_IOVF 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_TME 0x20
-#define WTCSR_RSTS 0x00
-
-#define RSTCSR_RSTS 0x20
-
-/**
- * sh_wdt_read_rstcsr - Read from Reset Control/Status Register
- *
- * Reads back the RSTCSR value.
- */
-static inline __u8 sh_wdt_read_rstcsr(void)
-{
- /*
- * Same read/write brain-damage as for WTCNT here..
- */
- return __raw_readb(RSTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Reset Control/Status Register
- *
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_rstcsr(__u8 val)
-{
- /*
- * Note: Due to the brain-damaged nature of this register,
- * we can't presently touch the WOVF bit, since the upper byte
- * has to be swapped for this. So just leave it alone..
- */
- __raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
-}
-
-#endif /* __ASM_CPU_SH2_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
deleted file mode 100644
index 3afa46c09fb531..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/addrspace.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x00000000
-#define P2SEG 0x20000000
-#define P3SEG 0x40000000
-#define P4SEG 0x60000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
deleted file mode 100644
index 06efb233eb35f4..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/cache.h
- *
- * Copyright (C) 2004 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2A_CACHE_H
-#define __ASM_CPU_SH2A_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xfffc1000 /* CCR1 */
-#define SH_CCR2 0xfffc1004
-
-/*
- * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
- * listed here are reserved.
- */
-#define CCR_CACHE_CB 0x0000 /* Hack */
-#define CCR_CACHE_OCE 0x0001
-#define CCR_CACHE_WT 0x0002
-#define CCR_CACHE_OCI 0x0008 /* OCF */
-#define CCR_CACHE_ICE 0x0100
-#define CCR_CACHE_ICI 0x0800 /* ICF */
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf0800000
-
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI)
-#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI
-#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
deleted file mode 100644
index fb0813f47043ea..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/freq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2A_FREQ_H
-#define __ASM_CPU_SH2A_FREQ_H
-
-#define FREQCR 0xfffe0010
-
-#endif /* __ASM_CPU_SH2A_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
deleted file mode 100644
index 6b6c7ee752debf..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_RTC_H
-#define __ASM_SH_CPU_SH2A_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7203.h b/arch/sh/include/cpu-sh2a/cpu/sh7203.h
deleted file mode 100644
index f250adfa46c626..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7203.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7203_H__
-#define __ASM_SH7203_H__
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC14, GPIO_PC13, GPIO_PC12,
- GPIO_PC11, GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE15, GPIO_PE14, GPIO_PE13, GPIO_PE12,
- GPIO_PE11, GPIO_PE10, GPIO_PE9, GPIO_PE8,
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF30, GPIO_PF29, GPIO_PF28,
- GPIO_PF27, GPIO_PF26, GPIO_PF25, GPIO_PF24,
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PB, GPIO_FN_PINT6_PB, GPIO_FN_PINT5_PB, GPIO_FN_PINT4_PB,
- GPIO_FN_PINT3_PB, GPIO_FN_PINT2_PB, GPIO_FN_PINT1_PB, GPIO_FN_PINT0_PB,
- GPIO_FN_PINT7_PD, GPIO_FN_PINT6_PD, GPIO_FN_PINT5_PD, GPIO_FN_PINT4_PD,
- GPIO_FN_PINT3_PD, GPIO_FN_PINT2_PD, GPIO_FN_PINT1_PD, GPIO_FN_PINT0_PD,
- GPIO_FN_IRQ7_PB, GPIO_FN_IRQ6_PB, GPIO_FN_IRQ5_PB, GPIO_FN_IRQ4_PB,
- GPIO_FN_IRQ3_PB, GPIO_FN_IRQ2_PB, GPIO_FN_IRQ1_PB, GPIO_FN_IRQ0_PB,
- GPIO_FN_IRQ7_PD, GPIO_FN_IRQ6_PD, GPIO_FN_IRQ5_PD, GPIO_FN_IRQ4_PD,
- GPIO_FN_IRQ3_PD, GPIO_FN_IRQ2_PD, GPIO_FN_IRQ1_PD, GPIO_FN_IRQ0_PD,
- GPIO_FN_IRQ7_PE, GPIO_FN_IRQ6_PE, GPIO_FN_IRQ5_PE, GPIO_FN_IRQ4_PE,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- GPIO_FN_WDTOVF, GPIO_FN_IRQOUT, GPIO_FN_REFOUT, GPIO_FN_IRQOUT_REFOUT,
- GPIO_FN_UBCTRG,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* IIC3 */
- GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1,
- GPIO_FN_SDA0, GPIO_FN_SCL0,
-
- /* DMAC */
- GPIO_FN_TEND0_PD, GPIO_FN_TEND0_PE, GPIO_FN_DACK0_PD,
- GPIO_FN_DACK0_PE, GPIO_FN_DREQ0_PD, GPIO_FN_DREQ0_PE,
- GPIO_FN_TEND1_PD, GPIO_FN_TEND1_PE, GPIO_FN_DACK1_PD,
- GPIO_FN_DACK1_PE, GPIO_FN_DREQ1_PD, GPIO_FN_DREQ1_PE,
- GPIO_FN_DACK2, GPIO_FN_DREQ2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3,
-
- /* ADC */
- GPIO_FN_ADTRG_PD, GPIO_FN_ADTRG_PE,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_CS4, GPIO_FN_MRES, GPIO_FN_BS,
- GPIO_FN_IOIS16, GPIO_FN_CS1, GPIO_FN_CS6_CE1B,
- GPIO_FN_CE2B, GPIO_FN_CS5_CE1A, GPIO_FN_CE2A,
- GPIO_FN_FRAME, GPIO_FN_WAIT, GPIO_FN_RDWR,
- GPIO_FN_CKE, GPIO_FN_CASU, GPIO_FN_BREQ, GPIO_FN_RASU,
- GPIO_FN_BACK, GPIO_FN_CASL, GPIO_FN_RASL,
- GPIO_FN_WE3_DQMUU_AH_ICIO_WR, GPIO_FN_WE2_DQMUL_ICIORD,
- GPIO_FN_WE1_DQMLU_WE, GPIO_FN_WE0_DQMLL,
- GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_A1, GPIO_FN_A0, GPIO_FN_CS7,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD_PD, GPIO_FN_TCLKC_PD, GPIO_FN_TCLKB_PD, GPIO_FN_TCLKA_PD,
- GPIO_FN_TCLKD_PF, GPIO_FN_TCLKC_PF, GPIO_FN_TCLKB_PF, GPIO_FN_TCLKA_PF,
-
- /* SSU */
- GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
- GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
- GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
- GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
-
- /* SCIF */
- GPIO_FN_TXD0, GPIO_FN_RXD0, GPIO_FN_SCK0,
- GPIO_FN_TXD1, GPIO_FN_RXD1, GPIO_FN_SCK1,
- GPIO_FN_TXD2, GPIO_FN_RXD2, GPIO_FN_SCK2,
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3, GPIO_FN_SCK3,
-
- /* SSI */
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_SSIDATA3, GPIO_FN_SSIWS3, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA2, GPIO_FN_SSIWS2, GPIO_FN_SSISCK2,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIWS1, GPIO_FN_SSISCK1,
- GPIO_FN_SSIDATA0, GPIO_FN_SSIWS0, GPIO_FN_SSISCK0,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_FRB,
- GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0,
- GPIO_FN_FSC, GPIO_FN_FOE, GPIO_FN_FCDE, GPIO_FN_FWE,
-
- /* LCDC */
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_M_DISP, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_DON,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
-};
-
-#endif /* __ASM_SH7203_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/arch/sh/include/cpu-sh2a/cpu/sh7264.h
deleted file mode 100644
index 8a1338aaf10a5c..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7264.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7264_H__
-#define __ASM_SH7264_H__
-
-enum {
- /* Port A */
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* Port K */
- GPIO_PK11, GPIO_PK10, GPIO_PK9, GPIO_PK8,
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG,
-
- GPIO_FN_IRQ7_PC, GPIO_FN_IRQ6_PC, GPIO_FN_IRQ5_PC, GPIO_FN_IRQ4_PC,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
-
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS6CE1B, GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_ICIOWRAH, GPIO_FN_ICIORD,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_SCK1, GPIO_FN_SCK2, GPIO_FN_SCK3,
- GPIO_FN_RXD0, GPIO_FN_RXD1, GPIO_FN_RXD2, GPIO_FN_RXD3,
- GPIO_FN_TXD0, GPIO_FN_TXD1, GPIO_FN_TXD2, GPIO_FN_TXD3,
- GPIO_FN_RXD4, GPIO_FN_RXD5, GPIO_FN_RXD6, GPIO_FN_RXD7,
- GPIO_FN_TXD4, GPIO_FN_TXD5, GPIO_FN_TXD6, GPIO_FN_TXD7,
- GPIO_FN_RTS1, GPIO_FN_RTS3, GPIO_FN_CTS1, GPIO_FN_CTS3,
-
- /* RSPI */
- GPIO_FN_RSPCK0, GPIO_FN_MOSI0,
- GPIO_FN_MISO0_PF12, GPIO_FN_MISO1,
- GPIO_FN_SSL00,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1_PG19, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC3 */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6, GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2, GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7264_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
deleted file mode 100644
index fece521c74b30d..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7269_H__
-#define __ASM_SH7269_H__
-
-enum {
- /* Port A */
- GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG27, GPIO_PG26, GPIO_PG25, GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ31, GPIO_PJ30, GPIO_PJ29, GPIO_PJ28,
- GPIO_PJ27, GPIO_PJ26, GPIO_PJ25, GPIO_PJ24,
- GPIO_PJ23, GPIO_PJ22, GPIO_PJ21, GPIO_PJ20,
- GPIO_PJ19, GPIO_PJ18, GPIO_PJ17, GPIO_PJ16,
- GPIO_PJ15, GPIO_PJ14, GPIO_PJ13, GPIO_PJ12,
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* INTC: IRQ and PINT */
- GPIO_FN_IRQ7_PG, GPIO_FN_IRQ6_PG, GPIO_FN_IRQ5_PG, GPIO_FN_IRQ4_PG,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PG, GPIO_FN_IRQ0_PG,
- GPIO_FN_IRQ7_PF, GPIO_FN_IRQ6_PF, GPIO_FN_IRQ5_PF, GPIO_FN_IRQ4_PF,
- GPIO_FN_IRQ3_PJ, GPIO_FN_IRQ2_PJ, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ1_PC, GPIO_FN_IRQ0_PC,
-
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG, GPIO_FN_PINT0_PG,
- GPIO_FN_PINT7_PH, GPIO_FN_PINT6_PH, GPIO_FN_PINT5_PH, GPIO_FN_PINT4_PH,
- GPIO_FN_PINT3_PH, GPIO_FN_PINT2_PH, GPIO_FN_PINT1_PH, GPIO_FN_PINT0_PH,
- GPIO_FN_PINT7_PJ, GPIO_FN_PINT6_PJ, GPIO_FN_PINT5_PJ, GPIO_FN_PINT4_PJ,
- GPIO_FN_PINT3_PJ, GPIO_FN_PINT2_PJ, GPIO_FN_PINT1_PJ, GPIO_FN_PINT0_PJ,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX2, GPIO_FN_CRX2,
- GPIO_FN_CTX1, GPIO_FN_CRX1,
- GPIO_FN_CTX0, GPIO_FN_CRX0,
- GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
- GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
- GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
- GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_WE3ICIOWRAHDQMUU, GPIO_FN_WE2ICIORDDQMUL,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
- GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
- GPIO_FN_SCK2, GPIO_FN_RXD2, GPIO_FN_TXD2,
- GPIO_FN_SCK3, GPIO_FN_RXD3, GPIO_FN_TXD3,
- GPIO_FN_SCK4, GPIO_FN_RXD4, GPIO_FN_TXD4,
- GPIO_FN_SCK5, GPIO_FN_RXD5, GPIO_FN_TXD5, GPIO_FN_RTS5, GPIO_FN_CTS5,
- GPIO_FN_SCK6, GPIO_FN_RXD6, GPIO_FN_TXD6,
- GPIO_FN_SCK7, GPIO_FN_RXD7, GPIO_FN_TXD7, GPIO_FN_RTS7, GPIO_FN_CTS7,
-
- /* RSPI */
- GPIO_FN_MISO0_PJ19, GPIO_FN_MISO0_PB20,
- GPIO_FN_MOSI0_PJ18, GPIO_FN_MOSI0_PB19,
- GPIO_FN_SSL00_PJ17, GPIO_FN_SSL00_PB18,
- GPIO_FN_RSPCK0_PJ16, GPIO_FN_RSPCK0_PB17,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_AUDIO_XOUT,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA23, GPIO_FN_DV_DATA22,
- GPIO_FN_DV_DATA21, GPIO_FN_DV_DATA20,
- GPIO_FN_DV_DATA19, GPIO_FN_DV_DATA18,
- GPIO_FN_DV_DATA17, GPIO_FN_DV_DATA16,
- GPIO_FN_DV_DATA15, GPIO_FN_DV_DATA14,
- GPIO_FN_DV_DATA13, GPIO_FN_DV_DATA12,
- GPIO_FN_DV_DATA11, GPIO_FN_DV_DATA10,
- GPIO_FN_DV_DATA9, GPIO_FN_DV_DATA8,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6,
- GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2,
- GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22,
- GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20,
- GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18,
- GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16,
- GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14,
- GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12,
- GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10,
- GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8,
- GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6,
- GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4,
- GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2,
- GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0,
- GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22,
- GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20,
- GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18,
- GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16,
- GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14,
- GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12,
- GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10,
- GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8,
- GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6,
- GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4,
- GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2,
- GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7269_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
deleted file mode 100644
index 8f932b733c6748..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/watchdog.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <cpu-sh2/cpu/watchdog.h>
diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
deleted file mode 100644
index 2ee206c9bf1aa8..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/adc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_ADC_H
-#define __ASM_CPU_SH3_ADC_H
-
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-
-#define ADDRAH 0xa4000080
-#define ADDRAL 0xa4000082
-#define ADDRBH 0xa4000084
-#define ADDRBL 0xa4000086
-#define ADDRCH 0xa4000088
-#define ADDRCL 0xa400008a
-#define ADDRDH 0xa400008c
-#define ADDRDL 0xa400008e
-#define ADCSR 0xa4000090
-
-#define ADCSR_ADF 0x80
-#define ADCSR_ADIE 0x40
-#define ADCSR_ADST 0x20
-#define ADCSR_MULTI 0x10
-#define ADCSR_CKS 0x08
-#define ADCSR_CH_MASK 0x07
-
-#define ADCR 0xa4000092
-
-#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
deleted file mode 100644
index f571248269430c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_CACHE_H
-#define __ASM_CPU_SH3_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xffffffec /* Address of Cache Control Register */
-
-#define CCR_CACHE_CE 0x01 /* Cache Enable */
-#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */
-#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */
-#define CCR_CACHE_CF 0x08 /* Cache Flush */
-#define CCR_CACHE_ORA 0x20 /* RAM mode */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3_REG 0xa40000b4
-#define CCR_CACHE_16KB 0x00010000
-#define CCR_CACHE_32KB 0x00020000
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
deleted file mode 100644
index fd02331608a8d6..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dac.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DAC_H
-#define __ASM_CPU_SH3_DAC_H
-
-/*
- * Copyright (C) 2003 Andriy Skulysh
- */
-
-
-#define DADR0 0xa40000a0
-#define DADR1 0xa40000a2
-#define DACR 0xa40000a4
-#define DACR_DAOE1 0x80
-#define DACR_DAOE0 0x40
-#define DACR_DAE 0x20
-
-
-static __inline__ void sh_dac_enable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v |= DACR_DAOE1;
- else v |= DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_disable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v &= ~DACR_DAOE1;
- else v &= ~DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_output(u8 value, int channel)
-{
- if(channel) __raw_writeb(value,DADR1);
- else __raw_writeb(value,DADR0);
-}
-
-#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma-register.h b/arch/sh/include/cpu-sh3/cpu/dma-register.h
deleted file mode 100644
index c0f921fb4edcd1..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma-register.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH3 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-#define CHCR_TS_LOW_MASK 0x18
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-#define DMAOR_INIT DMAOR_DME
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- */
-enum {
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_128BIT,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_128BIT] = 4, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 3) << CHCR_TS_LOW_SHIFT)
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
deleted file mode 100644
index cd139681af4b6f..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DMA_H
-#define __ASM_CPU_SH3_DMA_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-#define SH_DMAC_BASE0 0xa4010020
-#else /* SH7705/06/07/09 */
-#define SH_DMAC_BASE0 0xa4000020
-#endif
-
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-
-#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
deleted file mode 100644
index 7290f02b717330..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/freq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_FREQ_H
-#define __ASM_CPU_SH3_FREQ_H
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7712
-#define FRQCR 0xA415FF80
-#else
-#define FRQCR 0xffffff80
-#endif
-
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 4
-
-#define FRQCR_CKOEN 0x0100
-#define FRQCR_PLLEN 0x0080
-#define FRQCR_PSTBY 0x0040
-
-#endif /* __ASM_CPU_SH3_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
deleted file mode 100644
index aeb0588ace980c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/gpio.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/gpio.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Addresses for the Pin Function Controller
- */
-#ifndef _CPU_SH3_GPIO_H
-#define _CPU_SH3_GPIO_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-
-/* Control registers */
-#define PORT_PACR 0xA4050100UL
-#define PORT_PBCR 0xA4050102UL
-#define PORT_PCCR 0xA4050104UL
-#define PORT_PDCR 0xA4050106UL
-#define PORT_PECR 0xA4050108UL
-#define PORT_PFCR 0xA405010AUL
-#define PORT_PGCR 0xA405010CUL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PPCR 0xA4050118UL
-#define PORT_PRCR 0xA405011AUL
-#define PORT_PSCR 0xA405011CUL
-#define PORT_PTCR 0xA405011EUL
-#define PORT_PUCR 0xA4050120UL
-#define PORT_PVCR 0xA4050122UL
-
-/* Data registers */
-#define PORT_PADR 0xA4050140UL
-/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
-#define PORT_PBDR 0xA4050142UL
-#define PORT_PCDR 0xA4050144UL
-#define PORT_PDDR 0xA4050146UL
-#define PORT_PEDR 0xA4050148UL
-#define PORT_PFDR 0xA405014AUL
-#define PORT_PGDR 0xA405014CUL
-#define PORT_PHDR 0xA405014EUL
-#define PORT_PJDR 0xA4050150UL
-#define PORT_PKDR 0xA4050152UL
-#define PORT_PLDR 0xA4050154UL
-#define PORT_PMDR 0xA4050156UL
-#define PORT_PPDR 0xA4050158UL
-#define PORT_PRDR 0xA405015AUL
-#define PORT_PSDR 0xA405015CUL
-#define PORT_PTDR 0xA405015EUL
-#define PORT_PUDR 0xA4050160UL
-#define PORT_PVDR 0xA4050162UL
-
-/* Pin Select Registers */
-#define PORT_PSELA 0xA4050124UL
-#define PORT_PSELB 0xA4050126UL
-#define PORT_PSELC 0xA4050128UL
-#define PORT_PSELD 0xA405012AUL
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-
-/* Control registers */
-#define PORT_PACR 0xa4000100UL
-#define PORT_PBCR 0xa4000102UL
-#define PORT_PCCR 0xa4000104UL
-#define PORT_PFCR 0xa400010aUL
-
-/* Data registers */
-#define PORT_PADR 0xa4000120UL
-#define PORT_PBDR 0xa4000122UL
-#define PORT_PCDR 0xa4000124UL
-#define PORT_PFDR 0xa400012aUL
-
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
deleted file mode 100644
index ead9a6f721135d..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/mmu_context.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
-#define __ASM_CPU_SH3_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */
-#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */
-#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */
-
-#define MMUCR 0xFFFFFFE0 /* MMU Control Register */
-#define MMUCR_TI (1 << 2) /* TLB flush bit */
-
-#define MMU_TLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#define MMU_NTLB_ENTRIES 128 /* for 7708 */
-#define MMU_NTLB_WAYS 4
-#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */
-
-#define TRA 0xffffffd0
-#define EXPEVT 0xffffffd4
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
-#else
-#define INTEVT 0xffffffd8
-#endif
-
-#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/serial.h b/arch/sh/include/cpu-sh3/cpu/serial.h
deleted file mode 100644
index 7b2ce6e3003e1e..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/serial.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH3_SERIAL_H
-#define __CPU_SH3_SERIAL_H
-
-#include <linux/serial_sci.h>
-
-extern struct plat_sci_port_ops sh770x_sci_port_ops;
-extern struct plat_sci_port_ops sh7710_sci_port_ops;
-extern struct plat_sci_port_ops sh7720_sci_port_ops;
-
-#endif /* __CPU_SH3_SERIAL_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/sh7720.h b/arch/sh/include/cpu-sh3/cpu/sh7720.h
deleted file mode 100644
index 449790c9eb77cd..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/sh7720.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7720_H__
-#define __ASM_SH7720_H__
-
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, GPIO_PTE3,
- GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, GPIO_PTG6,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, GPIO_PTH3,
- GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4, GPIO_PTJ3,
- GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, GPIO_PTL3,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTP */
- GPIO_PTP4, GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS6B_CE1B,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_A20, GPIO_FN_A19, GPIO_FN_A0,
- GPIO_FN_REFOUT, GPIO_FN_IRQOUT,
-
- /* LCDC */
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_DON, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
-
- /* AFEIF */
- GPIO_FN_AFE_RXIN, GPIO_FN_AFE_RDET,
- GPIO_FN_AFE_FS, GPIO_FN_AFE_TXOUT,
- GPIO_FN_AFE_SCLK, GPIO_FN_AFE_RLYCNT,
- GPIO_FN_AFE_HC1,
-
- /* IIC */
- GPIO_FN_IIC_SCL, GPIO_FN_IIC_SDA,
-
- /* DAC */
- GPIO_FN_DA1, GPIO_FN_DA0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* USB */
- GPIO_FN_USB1D_RCV, GPIO_FN_USB1D_TXSE0,
- GPIO_FN_USB1D_TXDPLS, GPIO_FN_USB1D_DMNS,
- GPIO_FN_USB1D_DPLS, GPIO_FN_USB1D_SPEED,
- GPIO_FN_USB1D_TXENL, GPIO_FN_USB2_PWR_EN,
- GPIO_FN_USB1_PWR_EN_USBF_UPLUP, GPIO_FN_USB1D_SUSPEND,
-
- /* INTC */
- GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3_IRL3, GPIO_FN_IRQ2_IRL2,
- GPIO_FN_IRQ1_IRL1, GPIO_FN_IRQ0_IRL0,
-
- /* PCC */
- GPIO_FN_PCC_REG, GPIO_FN_PCC_DRV,
- GPIO_FN_PCC_BVD2, GPIO_FN_PCC_BVD1,
- GPIO_FN_PCC_CD2, GPIO_FN_PCC_CD1,
- GPIO_FN_PCC_RESET, GPIO_FN_PCC_RDY,
- GPIO_FN_PCC_VS2, GPIO_FN_PCC_VS1,
-
- /* HUDI */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_ASEBRKAK, GPIO_FN_TRST,
- GPIO_FN_TMS, GPIO_FN_TDO, GPIO_FN_TDI, GPIO_FN_TCK,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_TEND0,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_MCLK,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
- GPIO_FN_SIOF0_SCK,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_MCLK,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
- GPIO_FN_SIOF1_SCK,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* TPU */
- GPIO_FN_TPU_TO1, GPIO_FN_TPU_TO0,
- GPIO_FN_TPU_TI3B, GPIO_FN_TPU_TI3A,
- GPIO_FN_TPU_TI2B, GPIO_FN_TPU_TI2A,
- GPIO_FN_TPU_TO3, GPIO_FN_TPU_TO2,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* MMC */
- GPIO_FN_MMC_DAT, GPIO_FN_MMC_CMD,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_VDDON,
- GPIO_FN_MMC_ODMOD,
-
- /* SYSC */
- GPIO_FN_STATUS0, GPIO_FN_STATUS1,
-};
-
-#endif /* __ASM_SH7720_H__ */
diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
deleted file mode 100644
index 9d7e9d98680947..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/watchdog.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_WATCHDOG_H
-#define __ASM_CPU_SH3_WATCHDOG_H
-
-/* Register definitions */
-#define WTCNT 0xffffff84
-#define WTCSR 0xffffff86
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH3_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
deleted file mode 100644
index f006c9489f5adb..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-4 CPUs.
- */
-#ifndef __ASM_CPU_SH4_ADDRSPACE_H
-#define __ASM_CPU_SH4_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-/* Detailed P4SEG */
-#define P4SEG_STORE_QUE (P4SEG)
-#define P4SEG_IC_ADDR 0xf0000000
-#define P4SEG_IC_DATA 0xf1000000
-#define P4SEG_ITLB_ADDR 0xf2000000
-#define P4SEG_ITLB_DATA 0xf3000000
-#define P4SEG_OC_ADDR 0xf4000000
-#define P4SEG_OC_DATA 0xf5000000
-#define P4SEG_TLB_ADDR 0xf6000000
-#define P4SEG_TLB_DATA 0xf7000000
-#define P4SEG_REG_BASE 0xff000000
-
-#define PA_AREA0 0x00000000
-#define PA_AREA1 0x04000000
-#define PA_AREA2 0x08000000
-#define PA_AREA3 0x0c000000
-#define PA_AREA4 0x10000000
-#define PA_AREA5 0x14000000
-#define PA_AREA6 0x18000000
-#define PA_AREA7 0x1c000000
-
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
-
-#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
deleted file mode 100644
index 72b4d13da127cd..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/cache.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_CACHE_H
-#define __ASM_CPU_SH4_CACHE_H
-
-#define L1_CACHE_SHIFT 5
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xff00001c /* Address of Cache Control Register */
-#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */
-#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/
-#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */
-#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */
-#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */
-#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */
-#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
-#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
-#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
-#ifndef CONFIG_CPU_SH4A
-#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
-#endif
-
-/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI)
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf4000000
-
-#define RAMCR 0xFF000074
-
-#endif /* __ASM_CPU_SH4_CACHE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
deleted file mode 100644
index 53f7ab990d8874..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH4 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-/* SH7751/7760/7780 DMA IRQ sources */
-
-#ifdef CONFIG_CPU_SH4A
-
-#define DMAOR_INIT DMAOR_DME
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00300000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00100000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#endif
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_128BIT_BLK = 0xb,
- XMIT_SZ_256BIT_BLK = 0xc,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_128BIT] = 4, \
- [XMIT_SZ_256BIT] = 5, \
- [XMIT_SZ_128BIT_BLK] = 4, \
- [XMIT_SZ_256BIT_BLK] = 5, \
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
- (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
-
-#else /* CONFIG_CPU_SH4A */
-
-#define DMAOR_INIT (0x8000 | DMAOR_DME)
-
-#define CHCR_TS_LOW_MASK 0x70
-#define CHCR_TS_LOW_SHIFT 4
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 1,
- XMIT_SZ_16BIT = 2,
- XMIT_SZ_32BIT = 3,
- XMIT_SZ_64BIT = 0,
- XMIT_SZ_256BIT = 4,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_256BIT] = 5, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 7) << CHCR_TS_LOW_SHIFT)
-
-#endif /* CONFIG_CPU_SH4A */
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
deleted file mode 100644
index 38187d06b23433..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#include <linux/sh_intc.h>
-
-/*
- * SH7750/SH7751/SH7760
- */
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMAE0_IRQ evt2irq(0x6c0)
-
-#define SH_DMAC_BASE0 0xffa00000
-#define SH_DMAC_BASE1 0xffa00070
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
deleted file mode 100644
index 29f451bfef19b4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/fpu.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
- *
- * Copyright (C) 2006 STMicroelectronics Limited
- * Author: Carl Shaw <carl.shaw@st.com>
- *
- * Definitions for SH4 FPU operations
- */
-
-#ifndef __CPU_SH4_FPU_H
-#define __CPU_SH4_FPU_H
-
-#define FPSCR_ENABLE_MASK 0x00000f80UL
-
-#define FPSCR_FMOV_DOUBLE (1<<1)
-
-#define FPSCR_CAUSE_INEXACT (1<<12)
-#define FPSCR_CAUSE_UNDERFLOW (1<<13)
-#define FPSCR_CAUSE_OVERFLOW (1<<14)
-#define FPSCR_CAUSE_DIVZERO (1<<15)
-#define FPSCR_CAUSE_INVALID (1<<16)
-#define FPSCR_CAUSE_ERROR (1<<17)
-
-#define FPSCR_DBL_PRECISION (1<<19)
-#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3)
-#define FPSCR_RM_NEAREST (0)
-#define FPSCR_RM_ZERO (1)
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
deleted file mode 100644
index 662f0f30e106e8..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150010
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-#define FRQCR 0xffc80000
-#define OSCCR 0xffc80018
-#define PLLCR 0xffc80024
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define FRQCR 0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define FRQCR FRQCRA
-#define SCLKACR FCLKACR
-#define SCLKBCR FCLKBCR
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150018
-
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7734)
-#define FRQCR0 0xffc80000
-#define FRQCR2 0xffc80008
-#define FRQMR1 0xffc80014
-#define FRQMR2 0xffc80018
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0 0xffc80000
-#define FRQCR1 0xffc80004
-#define FRQMR1 0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define FRQCR0 0xffc40000
-#define FRQCR1 0xffc40004
-#define FRQMR1 0xffc40014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR0 0xffc00000
-#define FRQCR1 0xffc00004
-#define FRQMR1 0xffc00014
-#else
-#define FRQCR 0xffc00000
-#define FRQCR_PSTBY 0x0200
-#define FRQCR_PLLEN 0x0400
-#define FRQCR_CKOEN 0x0800
-#endif
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
deleted file mode 100644
index 421b56d5c59562..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
-#define __ASM_CPU_SH4_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */
-#define MMU_TTB 0xFF000008 /* Translation table base register */
-#define MMU_TEA 0xFF00000C /* TLB Exception Address */
-#define MMU_PTEA 0xFF000034 /* PTE assistance register */
-#define MMU_PTEAEX 0xFF00007C /* PTE ASID extension register */
-
-#define MMUCR 0xFF000010 /* MMU Control Register */
-
-#define MMU_TLB_ENTRY_SHIFT 8
-
-#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000
-#define MMU_ITLB_DATA_ARRAY 0xF3000000
-#define MMU_ITLB_DATA_ARRAY2 0xF3800000
-
-#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
-#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000
-#define MMU_UTLB_DATA_ARRAY 0xF7000000
-#define MMU_UTLB_DATA_ARRAY2 0xF7800000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#ifdef CONFIG_MMU
-#define MMUCR_AT (1 << 0)
-#else
-#define MMUCR_AT (0)
-#endif
-
-#define MMUCR_TI (1 << 2)
-
-#define MMUCR_URB 0x00FC0000
-#define MMUCR_URB_SHIFT 18
-#define MMUCR_URB_NENTRIES 64
-#define MMUCR_URC 0x0000FC00
-#define MMUCR_URC_SHIFT 10
-
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
-#define MMUCR_SE (1 << 4)
-#else
-#define MMUCR_SE (0)
-#endif
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMUCR_AEX (1 << 6)
-#else
-#define MMUCR_AEX (0)
-#endif
-
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME (1 << 7)
-#else
-#define MMUCR_ME (0)
-#endif
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define MMUCR_SQMD (1 << 9)
-#else
-#define MMUCR_SQMD (0)
-#endif
-
-#define MMU_NTLB_ENTRIES 64
-#define MMU_CONTROL_INIT (MMUCR_AT | MMUCR_TI | MMUCR_SQMD | \
- MMUCR_ME | MMUCR_SE | MMUCR_AEX)
-
-#define TRA 0xff000020
-#define EXPEVT 0xff000024
-#define INTEVT 0xff000028
-
-#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
deleted file mode 100644
index 45647566940f30..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/rtc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_RTC_H
-#define __ASM_SH_CPU_SH4_RTC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define rtc_reg_size sizeof(u16)
-#else
-#define rtc_reg_size sizeof(u32)
-#endif
-
-#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
deleted file mode 100644
index 2306c79f4b5e26..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7722_H__
-#define __ASM_SH7722_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC5, GPIO_PTC4, GPIO_PTC3,
- GPIO_PTC2, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG4, GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, GPIO_PTK3,
- GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR4, GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, GPIO_PTW3,
- GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, GPIO_PTX3,
- GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY5, GPIO_PTY4, GPIO_PTY3, GPIO_PTY2,
- GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ5, GPIO_PTZ4, GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* SCIF2 */
- GPIO_FN_SCIF2_TXD, GPIO_FN_SCIF2_RXD,
- GPIO_FN_SCIF2_RTS, GPIO_FN_SCIF2_CTS, GPIO_FN_SCIF2_SCK,
-
- /* SIO */
- GPIO_FN_SIOTXD, GPIO_FN_SIORXD,
- GPIO_FN_SIOD, GPIO_FN_SIOSTRB0, GPIO_FN_SIOSTRB1,
- GPIO_FN_SIOSCK, GPIO_FN_SIOMCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO, GPIO_FN_VIO_STEX, GPIO_FN_VIO_STEM,
- GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, GPIO_FN_VIO_CLK,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
- /* Sub LCD - SYS Mode */
- GPIO_FN_LCDDON2, GPIO_FN_LCDVCPWC2, GPIO_FN_LCDVEPWC2,
- GPIO_FN_LCDVSYN2, GPIO_FN_LCDCS2,
-
- /* BSC */
- GPIO_FN_IOIS16, GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_BS, GPIO_FN_CS6B_CE1B, GPIO_FN_WAIT, GPIO_FN_CS6A_CE2B,
-
- /* SBSC */
- GPIO_FN_HPD63, GPIO_FN_HPD62, GPIO_FN_HPD61, GPIO_FN_HPD60,
- GPIO_FN_HPD59, GPIO_FN_HPD58, GPIO_FN_HPD57, GPIO_FN_HPD56,
- GPIO_FN_HPD55, GPIO_FN_HPD54, GPIO_FN_HPD53, GPIO_FN_HPD52,
- GPIO_FN_HPD51, GPIO_FN_HPD50, GPIO_FN_HPD49, GPIO_FN_HPD48,
- GPIO_FN_HPDQM7, GPIO_FN_HPDQM6, GPIO_FN_HPDQM5, GPIO_FN_HPDQM4,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* SDHI */
- GPIO_FN_SDHICD, GPIO_FN_SDHIWP, GPIO_FN_SDHID3, GPIO_FN_SDHID2,
- GPIO_FN_SDHID1, GPIO_FN_SDHID0, GPIO_FN_SDHICMD, GPIO_FN_SDHICLK,
-
- /* SIU - Port A */
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAISLD, GPIO_FN_SIUAILR,
- GPIO_FN_SIUAIBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUMCKA, GPIO_FN_SIUFCKA,
-
- /* SIU - Port B */
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBISLD, GPIO_FN_SIUBILR,
- GPIO_FN_SIUBIBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUMCKB, GPIO_FN_SIUFCKB,
-
- /* AUD */
- GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0,
-
- /* DMAC */
- GPIO_FN_DACK, GPIO_FN_DREQ0,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_MCK, GPIO_FN_SIOF0_SCK,
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_SS1, GPIO_FN_SIOF0_SS2,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_MCK, GPIO_FN_SIOF1_SCK,
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_SS1, GPIO_FN_SIOF1_SS2,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* TSIF */
- GPIO_FN_TS_SDAT, GPIO_FN_TS_SCK, GPIO_FN_TS_SDEN, GPIO_FN_TS_SPSYNC,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* TPU */
- GPIO_FN_TPUTO,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-};
-
-enum {
- HWBLK_URAM, HWBLK_XYMEM,
- HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_IIC, HWBLK_RTC,
- HWBLK_SDHI, HWBLK_KEYSC,
- HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
- HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
- HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SIUA_TX,
- SHDMA_SLAVE_SIUA_RX,
- SHDMA_SLAVE_SIUB_TX,
- SHDMA_SLAVE_SIUB_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
-};
-
-#endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
deleted file mode 100644
index 41f675307503d4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7723_H__
-#define __ASM_SH7723_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE5, GPIO_PTE4, GPIO_PTE3, GPIO_PTE2,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ5, GPIO_PTJ3, GPIO_PTJ2,
- GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT5, GPIO_PTT4, GPIO_PTT3, GPIO_PTT2,
- GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU5, GPIO_PTU4, GPIO_PTU3, GPIO_PTU2,
- GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* SCIF0 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF0_PTT_TXD, GPIO_FN_SCIF0_PTT_RXD, GPIO_FN_SCIF0_PTT_SCK,
- GPIO_FN_SCIF0_PTU_TXD, GPIO_FN_SCIF0_PTU_RXD, GPIO_FN_SCIF0_PTU_SCK,
-
- /* SCIF1 (SCIF: 3 pin PTS/PTV) */
- GPIO_FN_SCIF1_PTS_TXD, GPIO_FN_SCIF1_PTS_RXD, GPIO_FN_SCIF1_PTS_SCK,
- GPIO_FN_SCIF1_PTV_TXD, GPIO_FN_SCIF1_PTV_RXD, GPIO_FN_SCIF1_PTV_SCK,
-
- /* SCIF2 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF2_PTT_TXD, GPIO_FN_SCIF2_PTT_RXD, GPIO_FN_SCIF2_PTT_SCK,
- GPIO_FN_SCIF2_PTU_TXD, GPIO_FN_SCIF2_PTU_RXD, GPIO_FN_SCIF2_PTU_SCK,
-
- /* SCIF3 (SCIFA: 5 pin PTS/PTV) */
- GPIO_FN_SCIF3_PTS_TXD, GPIO_FN_SCIF3_PTS_RXD, GPIO_FN_SCIF3_PTS_SCK,
- GPIO_FN_SCIF3_PTS_RTS, GPIO_FN_SCIF3_PTS_CTS,
- GPIO_FN_SCIF3_PTV_TXD, GPIO_FN_SCIF3_PTV_RXD, GPIO_FN_SCIF3_PTV_SCK,
- GPIO_FN_SCIF3_PTV_RTS, GPIO_FN_SCIF3_PTV_CTS,
-
- /* SCIF4 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF4_PTE_TXD, GPIO_FN_SCIF4_PTE_RXD, GPIO_FN_SCIF4_PTE_SCK,
- GPIO_FN_SCIF4_PTN_TXD, GPIO_FN_SCIF4_PTN_RXD, GPIO_FN_SCIF4_PTN_SCK,
-
- /* SCIF5 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF5_PTE_TXD, GPIO_FN_SCIF5_PTE_RXD, GPIO_FN_SCIF5_PTE_SCK,
- GPIO_FN_SCIF5_PTN_TXD, GPIO_FN_SCIF5_PTN_RXD, GPIO_FN_SCIF5_PTN_SCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO,
- GPIO_FN_VIO_VD1, GPIO_FN_VIO_HD1, GPIO_FN_VIO_CLK1,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK_PTR, GPIO_FN_LCDLCLK_PTW,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* AUD */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC,
-
- /* SDHI0 (PTD) */
- GPIO_FN_SDHI0CD_PTD, GPIO_FN_SDHI0WP_PTD,
- GPIO_FN_SDHI0D3_PTD, GPIO_FN_SDHI0D2_PTD,
- GPIO_FN_SDHI0D1_PTD, GPIO_FN_SDHI0D0_PTD,
- GPIO_FN_SDHI0CMD_PTD, GPIO_FN_SDHI0CLK_PTD,
-
- /* SDHI0 (PTS) */
- GPIO_FN_SDHI0CD_PTS, GPIO_FN_SDHI0WP_PTS,
- GPIO_FN_SDHI0D3_PTS, GPIO_FN_SDHI0D2_PTS,
- GPIO_FN_SDHI0D1_PTS, GPIO_FN_SDHI0D0_PTS,
- GPIO_FN_SDHI0CMD_PTS, GPIO_FN_SDHI0CLK_PTS,
-
- /* SDHI1 */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2,
- GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
-
- /* SIUA */
- GPIO_FN_SIUAFCK, GPIO_FN_SIUAILR, GPIO_FN_SIUAIBT, GPIO_FN_SIUAISLD,
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUAMCK,
- GPIO_FN_SIUAISPD, GPIO_FN_SIUAOSPD,
-
- /* SIUB */
- GPIO_FN_SIUBFCK, GPIO_FN_SIUBILR, GPIO_FN_SIUBIBT, GPIO_FN_SIUBISLD,
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUBMCK,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-
- /* MSIOF0 (PTF) */
- GPIO_FN_MSIOF0_PTF_TXD, GPIO_FN_MSIOF0_PTF_RXD, GPIO_FN_MSIOF0_PTF_MCK,
- GPIO_FN_MSIOF0_PTF_TSYNC, GPIO_FN_MSIOF0_PTF_TSCK,
- GPIO_FN_MSIOF0_PTF_RSYNC, GPIO_FN_MSIOF0_PTF_RSCK,
- GPIO_FN_MSIOF0_PTF_SS1, GPIO_FN_MSIOF0_PTF_SS2,
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN_MSIOF0_PTT_TXD, GPIO_FN_MSIOF0_PTT_RXD, GPIO_FN_MSIOF0_PTX_MCK,
- GPIO_FN_MSIOF0_PTT_TSYNC, GPIO_FN_MSIOF0_PTT_TSCK,
- GPIO_FN_MSIOF0_PTT_RSYNC, GPIO_FN_MSIOF0_PTT_RSCK,
- GPIO_FN_MSIOF0_PTT_SS1, GPIO_FN_MSIOF0_PTT_SS2,
-
- /* MSIOF1 */
- GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_MCK,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
-
- /* TSIF */
- GPIO_FN_TS0_SDAT, GPIO_FN_TS0_SCK, GPIO_FN_TS0_SDEN, GPIO_FN_TS0_SPSYNC,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* TPU */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_WAIT, GPIO_FN_BS,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
-
- /* ATAPI */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IODREQ, GPIO_FN_IDEIORDY, GPIO_FN_IDEINT, GPIO_FN_IDEIOWR,
- GPIO_FN_IDEIORD, GPIO_FN_IDECS1, GPIO_FN_IDECS0, GPIO_FN_IDEA2,
- GPIO_FN_IDEA1, GPIO_FN_IDEA0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
- HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
- HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
- HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
- HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
- HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
- HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-#endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
deleted file mode 100644
index b3a7caf54c9d68..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7724_H__
-#define __ASM_SH7724_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->7
- * MD1: CPG - Clock Mode 0->7
- * MD2: CPG - Clock Mode 0->7
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4,
- GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
- GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
- GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
- GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
- GPIO_FN_IOIS16, GPIO_FN_WAIT,
- GPIO_FN_BS,
-
- /* KEYSC (PTA/PTB)*/
- GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
- GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
-
- /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR,
- GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IDEINT, GPIO_FN_IDEIORDY,
-
- /* TPU (PTB/PTR/PTS) */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
- GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
-
- /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN,
- GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
- GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK,
-
- /* SCIF0 (PTF/PTM) */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 (PTL) */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
- GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
- GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
-
- /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
- GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
- GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
- GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
- GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
-
- /* SCIF4 (PTE) */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 (PTS) */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* FSI (PTE/PTU/PTV) */
- GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD,
- GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK,
- GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
- GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK,
- GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO,
- GPIO_FN_FSIIASD,
-
- /* AUD (PTG) */
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
- GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
-
- /* VIO (PTS) (common?) */
- GPIO_FN_VIO_CKO,
-
- /* VIO0 (PTH/PTK) */
- GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
- GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8,
- GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4,
- GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0,
- GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK,
- GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
-
- /* VIO1 (PTK/PTS) */
- GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
- GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
- GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
-
- /* Eth (PTL/PTN/PTX) */
- GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1,
- GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1,
- GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
- GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV,
- GPIO_FN_LNKSTA, GPIO_FN_MDIO,
- GPIO_FN_MDC,
-
- /* System (PTJ) */
- GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
-
- /* VOU (PTL/PTM/PTN*/
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
-
- /* MSIOF0 (PTL/PTM) */
- GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
- GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK,
- GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
- GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
- GPIO_FN_MSIOF0_RSYNC,
-
- /* MSIOF1 (PTV) */
- GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD,
- GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_RSYNC,
-
- /* DMAC (PTU/PTX) */
- GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
- GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
-
- /* SDHI0 (PTY) */
- GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
- GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0,
-
- /* SDHI1 (PTW) */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
- GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0,
-
- /* MMC (PTW/PTX)*/
- GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
- GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
-
- /* IrDA (PTX) */
- GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
-
- /* TSIF (PTX) */
- GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
- GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
-
- /* IRQ (PTZ) */
- GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
- GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
- GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
- HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
- HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
- HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
- HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
- HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
- HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
- HWBLK_BEU0, HWBLK_CEU0, HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_SCIF5_TX,
- SHDMA_SLAVE_SCIF5_RX,
- SHDMA_SLAVE_USB0D0_TX,
- SHDMA_SLAVE_USB0D0_RX,
- SHDMA_SLAVE_USB0D1_TX,
- SHDMA_SLAVE_USB0D1_RX,
- SHDMA_SLAVE_USB1D0_TX,
- SHDMA_SLAVE_USB1D0_RX,
- SHDMA_SLAVE_USB1D1_TX,
- SHDMA_SLAVE_USB1D1_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
- SHDMA_SLAVE_SDHI1_TX,
- SHDMA_SLAVE_SDHI1_RX,
-};
-
-extern struct clk sh7724_fsimcka_clk;
-extern struct clk sh7724_fsimckb_clk;
-extern struct clk sh7724_dv_clki;
-
-#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7734.h b/arch/sh/include/cpu-sh4/cpu/sh7734.h
deleted file mode 100644
index 82b63208135aec..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7734.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7734_H__
-#define __ASM_SH7734_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
- */
-enum {
- GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
- GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
- GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
- GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
- GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
- GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
- GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
- GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
-
- GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
- GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
- GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
- GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
- GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
- GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
- GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
- GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31,
-
- GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
- GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
- GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
- GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
- GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
- GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
- GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
- GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
-
- GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
- GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
- GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
- GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
- GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
- GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
- GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
- GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
-
- GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
- GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
- GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
- GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
- GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
- GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
- GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
- GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
-
- GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
- GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
- GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
-
- GPIO_FN_CLKOUT, GPIO_FN_BS, GPIO_FN_CS0, GPIO_FN_EX_CS0, GPIO_FN_RD,
- GPIO_FN_WE0, GPIO_FN_WE1,
-
- GPIO_FN_SCL0, GPIO_FN_PENC0, GPIO_FN_USB_OVC0,
-
- GPIO_FN_IRQ2_B, GPIO_FN_IRQ3_B,
-
- /* IPSR0 */
- GPIO_FN_A15, GPIO_FN_ST0_VCO_CLKIN, GPIO_FN_LCD_DATA15_A,
- GPIO_FN_TIOC3D_C,
- GPIO_FN_A14, GPIO_FN_LCD_DATA14_A, GPIO_FN_TIOC3C_C,
- GPIO_FN_A13, GPIO_FN_LCD_DATA13_A, GPIO_FN_TIOC3B_C,
- GPIO_FN_A12, GPIO_FN_LCD_DATA12_A, GPIO_FN_TIOC3A_C,
- GPIO_FN_A11, GPIO_FN_ST0_D7, GPIO_FN_LCD_DATA11_A,
- GPIO_FN_TIOC2B_C,
- GPIO_FN_A10, GPIO_FN_ST0_D6, GPIO_FN_LCD_DATA10_A,
- GPIO_FN_TIOC2A_C,
- GPIO_FN_A9, GPIO_FN_ST0_D5, GPIO_FN_LCD_DATA9_A,
- GPIO_FN_TIOC1B_C,
- GPIO_FN_A8, GPIO_FN_ST0_D4, GPIO_FN_LCD_DATA8_A,
- GPIO_FN_TIOC1A_C,
- GPIO_FN_A7, GPIO_FN_ST0_D3, GPIO_FN_LCD_DATA7_A, GPIO_FN_TIOC0D_C,
- GPIO_FN_A6, GPIO_FN_ST0_D2, GPIO_FN_LCD_DATA6_A, GPIO_FN_TIOC0C_C,
- GPIO_FN_A5, GPIO_FN_ST0_D1, GPIO_FN_LCD_DATA5_A, GPIO_FN_TIOC0B_C,
- GPIO_FN_A4, GPIO_FN_ST0_D0, GPIO_FN_LCD_DATA4_A, GPIO_FN_TIOC0A_C,
- GPIO_FN_A3, GPIO_FN_ST0_VLD, GPIO_FN_LCD_DATA3_A, GPIO_FN_TCLKD_C,
- GPIO_FN_A2, GPIO_FN_ST0_SYC, GPIO_FN_LCD_DATA2_A, GPIO_FN_TCLKC_C,
- GPIO_FN_A1, GPIO_FN_ST0_REQ, GPIO_FN_LCD_DATA1_A, GPIO_FN_TCLKB_C,
- GPIO_FN_A0, GPIO_FN_ST0_CLKIN, GPIO_FN_LCD_DATA0_A, GPIO_FN_TCLKA_C,
-
- /* IPSR1 */
- GPIO_FN_D3, GPIO_FN_SD0_DAT3_A, GPIO_FN_MMC_D3_A, GPIO_FN_ST1_D6,
- GPIO_FN_FD3_A,
- GPIO_FN_D2, GPIO_FN_SD0_DAT2_A, GPIO_FN_MMC_D2_A, GPIO_FN_ST1_D5,
- GPIO_FN_FD2_A,
- GPIO_FN_D1, GPIO_FN_SD0_DAT1_A, GPIO_FN_MMC_D1_A, GPIO_FN_ST1_D4,
- GPIO_FN_FD1_A,
- GPIO_FN_D0, GPIO_FN_SD0_DAT0_A, GPIO_FN_MMC_D0_A, GPIO_FN_ST1_D3,
- GPIO_FN_FD0_A,
- GPIO_FN_A25, GPIO_FN_TX2_D, GPIO_FN_ST1_D2,
- GPIO_FN_A24, GPIO_FN_RX2_D, GPIO_FN_ST1_D1,
- GPIO_FN_A23, GPIO_FN_ST1_D0, GPIO_FN_LCD_M_DISP_A,
- GPIO_FN_A22, GPIO_FN_ST1_VLD, GPIO_FN_LCD_VEPWC_A,
- GPIO_FN_A21, GPIO_FN_ST1_SYC, GPIO_FN_LCD_VCPWC_A,
- GPIO_FN_A20, GPIO_FN_ST1_REQ, GPIO_FN_LCD_FLM_A,
- GPIO_FN_A19, GPIO_FN_ST1_CLKIN, GPIO_FN_LCD_CLK_A, GPIO_FN_TIOC4D_C,
- GPIO_FN_A18, GPIO_FN_ST1_PWM, GPIO_FN_LCD_CL2_A, GPIO_FN_TIOC4C_C,
- GPIO_FN_A17, GPIO_FN_ST1_VCO_CLKIN, GPIO_FN_LCD_CL1_A, GPIO_FN_TIOC4B_C,
- GPIO_FN_A16, GPIO_FN_ST0_PWM, GPIO_FN_LCD_DON_A, GPIO_FN_TIOC4A_C,
-
- /* IPSR2 */
- GPIO_FN_D14, GPIO_FN_TX2_B, GPIO_FN_FSE_A, GPIO_FN_ET0_TX_CLK_B,
- GPIO_FN_D13, GPIO_FN_RX2_B, GPIO_FN_FRB_A, GPIO_FN_ET0_ETXD6_B,
- GPIO_FN_D12, GPIO_FN_FWE_A, GPIO_FN_ET0_ETXD5_B,
- GPIO_FN_D11, GPIO_FN_RSPI_MISO_A, GPIO_FN_QMI_QIO1_A,
- GPIO_FN_FRE_A, GPIO_FN_ET0_ETXD3_B,
- GPIO_FN_D10, GPIO_FN_RSPI_MOSI_A, GPIO_FN_QMO_QIO0_A,
- GPIO_FN_FALE_A, GPIO_FN_ET0_ETXD2_B,
- GPIO_FN_D9, GPIO_FN_SD0_CMD_A, GPIO_FN_MMC_CMD_A, GPIO_FN_QIO3_A,
- GPIO_FN_FCLE_A, GPIO_FN_ET0_ETXD1_B,
- GPIO_FN_D8, GPIO_FN_SD0_CLK_A, GPIO_FN_MMC_CLK_A, GPIO_FN_QIO2_A,
- GPIO_FN_FCE_A, GPIO_FN_ET0_GTX_CLK_B,
- GPIO_FN_D7, GPIO_FN_RSPI_SSL_A, GPIO_FN_MMC_D7_A, GPIO_FN_QSSL_A,
- GPIO_FN_FD7_A,
- GPIO_FN_D6, GPIO_FN_RSPI_RSPCK_A, GPIO_FN_MMC_D6_A, GPIO_FN_QSPCLK_A,
- GPIO_FN_FD6_A,
- GPIO_FN_D5, GPIO_FN_SD0_WP_A, GPIO_FN_MMC_D5_A, GPIO_FN_FD5_A,
- GPIO_FN_D4, GPIO_FN_SD0_CD_A, GPIO_FN_MMC_D4_A, GPIO_FN_ST1_D7,
- GPIO_FN_FD4_A,
-
- /* IPSR3 */
- GPIO_FN_DRACK0, GPIO_FN_SD1_DAT2_A, GPIO_FN_ATAG, GPIO_FN_TCLK1_A,
- GPIO_FN_ET0_ETXD7,
- GPIO_FN_EX_WAIT2, GPIO_FN_SD1_DAT1_A, GPIO_FN_DACK2, GPIO_FN_CAN1_RX_C,
- GPIO_FN_ET0_MAGIC_C, GPIO_FN_ET0_ETXD6_A,
- GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C,
- GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A,
- GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B,
- GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4,
- GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B,
- GPIO_FN_ET0_ETXD3_A,
- GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B,
- GPIO_FN_ET0_ETXD2_A,
- GPIO_FN_EX_CS3, GPIO_FN_SD1_CD_A, GPIO_FN_ATARD, GPIO_FN_QMO_QIO0_B,
- GPIO_FN_ET0_ETXD1_A,
- GPIO_FN_EX_CS2, GPIO_FN_TX3_B, GPIO_FN_ATACS1, GPIO_FN_QSPCLK_B,
- GPIO_FN_ET0_GTX_CLK_A,
- GPIO_FN_EX_CS1, GPIO_FN_RX3_B, GPIO_FN_ATACS0, GPIO_FN_QIO2_B,
- GPIO_FN_ET0_ETXD0,
- GPIO_FN_CS1_A26, GPIO_FN_QIO3_B,
- GPIO_FN_D15, GPIO_FN_SCK2_B,
-
- /* IPSR4 */
- GPIO_FN_SCK2_A, GPIO_FN_VI0_G3,
- GPIO_FN_RTS1_B, GPIO_FN_VI0_G2,
- GPIO_FN_CTS1_B, GPIO_FN_VI0_DATA7_VI0_G1,
- GPIO_FN_TX1_B, GPIO_FN_VI0_DATA6_VI0_G0, GPIO_FN_ET0_PHY_INT_A,
- GPIO_FN_RX1_B, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_ET0_MAGIC_A,
- GPIO_FN_SCK1_B, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ET0_LINK_A,
- GPIO_FN_RTS0_B, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ET0_MDIO_A,
- GPIO_FN_CTS0_B, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_RMII0_MDIO_A,
- GPIO_FN_ET0_MDC,
- GPIO_FN_HTX0_A, GPIO_FN_TX1_A, GPIO_FN_VI0_DATA1_VI0_B1,
- GPIO_FN_RMII0_MDC_A, GPIO_FN_ET0_COL,
- GPIO_FN_HRX0_A, GPIO_FN_RX1_A, GPIO_FN_VI0_DATA0_VI0_B0,
- GPIO_FN_RMII0_CRS_DV_A, GPIO_FN_ET0_CRS,
- GPIO_FN_HSCK0_A, GPIO_FN_SCK1_A, GPIO_FN_VI0_VSYNC,
- GPIO_FN_RMII0_RX_ER_A, GPIO_FN_ET0_RX_ER,
- GPIO_FN_HRTS0_A, GPIO_FN_RTS1_A, GPIO_FN_VI0_HSYNC,
- GPIO_FN_RMII0_TXD_EN_A, GPIO_FN_ET0_RX_DV,
- GPIO_FN_HCTS0_A, GPIO_FN_CTS1_A, GPIO_FN_VI0_FIELD,
- GPIO_FN_RMII0_RXD1_A, GPIO_FN_ET0_ERXD7,
-
- /* IPSR5 */
- GPIO_FN_SD2_CLK_A, GPIO_FN_RX2_A, GPIO_FN_VI0_G4, GPIO_FN_ET0_RX_CLK_B,
- GPIO_FN_SD2_CMD_A, GPIO_FN_TX2_A, GPIO_FN_VI0_G5, GPIO_FN_ET0_ERXD2_B,
- GPIO_FN_SD2_DAT0_A, GPIO_FN_RX3_A, GPIO_FN_VI0_R0, GPIO_FN_ET0_ERXD3_B,
- GPIO_FN_SD2_DAT1_A, GPIO_FN_TX3_A, GPIO_FN_VI0_R1, GPIO_FN_ET0_MDIO_B,
- GPIO_FN_SD2_DAT2_A, GPIO_FN_RX4_A, GPIO_FN_VI0_R2, GPIO_FN_ET0_LINK_B,
- GPIO_FN_SD2_DAT3_A, GPIO_FN_TX4_A, GPIO_FN_VI0_R3, GPIO_FN_ET0_MAGIC_B,
- GPIO_FN_SD2_CD_A, GPIO_FN_RX5_A, GPIO_FN_VI0_R4, GPIO_FN_ET0_PHY_INT_B,
- GPIO_FN_SD2_WP_A, GPIO_FN_TX5_A, GPIO_FN_VI0_R5,
- GPIO_FN_REF125CK, GPIO_FN_ADTRG, GPIO_FN_RX5_C,
- GPIO_FN_REF50CK, GPIO_FN_CTS1_E, GPIO_FN_HCTS0_D,
-
- /* IPSR6 */
- GPIO_FN_DU0_DR0, GPIO_FN_SCIF_CLK_B, GPIO_FN_HRX0_D, GPIO_FN_IETX_A,
- GPIO_FN_TCLKA_A, GPIO_FN_HIFD00,
- GPIO_FN_DU0_DR1, GPIO_FN_SCK0_B, GPIO_FN_HTX0_D, GPIO_FN_IERX_A,
- GPIO_FN_TCLKB_A, GPIO_FN_HIFD01,
- GPIO_FN_DU0_DR2, GPIO_FN_RX0_B, GPIO_FN_TCLKC_A, GPIO_FN_HIFD02,
- GPIO_FN_DU0_DR3, GPIO_FN_TX0_B, GPIO_FN_TCLKD_A, GPIO_FN_HIFD03,
- GPIO_FN_DU0_DR4, GPIO_FN_CTS0_C, GPIO_FN_TIOC0A_A, GPIO_FN_HIFD04,
- GPIO_FN_DU0_DR5, GPIO_FN_RTS0_C, GPIO_FN_TIOC0B_A, GPIO_FN_HIFD05,
- GPIO_FN_DU0_DR6, GPIO_FN_SCK1_C, GPIO_FN_TIOC0C_A, GPIO_FN_HIFD06,
- GPIO_FN_DU0_DR7, GPIO_FN_RX1_C, GPIO_FN_TIOC0D_A, GPIO_FN_HIFD07,
- GPIO_FN_DU0_DG0, GPIO_FN_TX1_C, GPIO_FN_HSCK0_D, GPIO_FN_IECLK_A,
- GPIO_FN_TIOC1A_A, GPIO_FN_HIFD08,
- GPIO_FN_DU0_DG1, GPIO_FN_CTS1_C, GPIO_FN_HRTS0_D, GPIO_FN_TIOC1B_A,
- GPIO_FN_HIFD09,
-
- /* IPSR7 */
- GPIO_FN_DU0_DG2, GPIO_FN_RTS1_C, GPIO_FN_RMII0_MDC_B, GPIO_FN_TIOC2A_A,
- GPIO_FN_HIFD10,
- GPIO_FN_DU0_DG3, GPIO_FN_SCK2_C, GPIO_FN_RMII0_MDIO_B, GPIO_FN_TIOC2B_A,
- GPIO_FN_HIFD11,
- GPIO_FN_DU0_DG4, GPIO_FN_RX2_C, GPIO_FN_RMII0_CRS_DV_B,
- GPIO_FN_TIOC3A_A, GPIO_FN_HIFD12,
- GPIO_FN_DU0_DG5, GPIO_FN_TX2_C, GPIO_FN_RMII0_RX_ER_B,
- GPIO_FN_TIOC3B_A, GPIO_FN_HIFD13,
- GPIO_FN_DU0_DG6, GPIO_FN_RX3_C, GPIO_FN_RMII0_RXD0_B,
- GPIO_FN_TIOC3C_A, GPIO_FN_HIFD14,
- GPIO_FN_DU0_DG7, GPIO_FN_TX3_C, GPIO_FN_RMII0_RXD1_B,
- GPIO_FN_TIOC3D_A, GPIO_FN_HIFD15,
- GPIO_FN_DU0_DB0, GPIO_FN_RX4_C, GPIO_FN_RMII0_TXD_EN_B,
- GPIO_FN_TIOC4A_A, GPIO_FN_HIFCS,
- GPIO_FN_DU0_DB1, GPIO_FN_TX4_C, GPIO_FN_RMII0_TXD0_B,
- GPIO_FN_TIOC4B_A, GPIO_FN_HIFRS,
- GPIO_FN_DU0_DB2, GPIO_FN_RX5_B, GPIO_FN_RMII0_TXD1_B,
- GPIO_FN_TIOC4C_A, GPIO_FN_HIFWR,
- GPIO_FN_DU0_DB3, GPIO_FN_TX5_B, GPIO_FN_TIOC4D_A, GPIO_FN_HIFRD,
- GPIO_FN_DU0_DB4, GPIO_FN_HIFINT,
-
- /* IPSR8 */
- GPIO_FN_DU0_DB5, GPIO_FN_HIFDREQ,
- GPIO_FN_DU0_DB6, GPIO_FN_HIFRDY,
- GPIO_FN_DU0_DB7, GPIO_FN_SSI_SCK0_B, GPIO_FN_HIFEBL_B,
- GPIO_FN_DU0_DOTCLKIN, GPIO_FN_HSPI_CS0_C, GPIO_FN_SSI_WS0_B,
- GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_HSPI_CLK0_C, GPIO_FN_SSI_SDATA0_B,
- GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_HSPI_TX0_C, GPIO_FN_SSI_SCK1_B,
- GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_HSPI_RX0_C, GPIO_FN_SSI_WS1_B,
- GPIO_FN_DU0_EXODDF_DU0_ODDF, GPIO_FN_CAN0_RX_B, GPIO_FN_HSCK0_B,
- GPIO_FN_SSI_SDATA1_B,
- GPIO_FN_DU0_DISP, GPIO_FN_CAN0_TX_B, GPIO_FN_HRX0_B,
- GPIO_FN_AUDIO_CLKA_B,
- GPIO_FN_DU0_CDE, GPIO_FN_HTX0_B, GPIO_FN_AUDIO_CLKB_B,
- GPIO_FN_LCD_VCPWC_B,
- GPIO_FN_IRQ0_A, GPIO_FN_HSPI_TX_B, GPIO_FN_RX3_E, GPIO_FN_ET0_ERXD0,
- GPIO_FN_IRQ1_A, GPIO_FN_HSPI_RX_B, GPIO_FN_TX3_E, GPIO_FN_ET0_ERXD1,
- GPIO_FN_IRQ2_A, GPIO_FN_CTS0_A, GPIO_FN_HCTS0_B, GPIO_FN_ET0_ERXD2_A,
- GPIO_FN_IRQ3_A, GPIO_FN_RTS0_A, GPIO_FN_HRTS0_B, GPIO_FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- GPIO_FN_VI1_CLK_A, GPIO_FN_FD0_B, GPIO_FN_LCD_DATA0_B,
- GPIO_FN_VI1_0_A, GPIO_FN_FD1_B, GPIO_FN_LCD_DATA1_B,
- GPIO_FN_VI1_1_A, GPIO_FN_FD2_B, GPIO_FN_LCD_DATA2_B,
- GPIO_FN_VI1_2_A, GPIO_FN_FD3_B, GPIO_FN_LCD_DATA3_B,
- GPIO_FN_VI1_3_A, GPIO_FN_FD4_B, GPIO_FN_LCD_DATA4_B,
- GPIO_FN_VI1_4_A, GPIO_FN_FD5_B, GPIO_FN_LCD_DATA5_B,
- GPIO_FN_VI1_5_A, GPIO_FN_FD6_B, GPIO_FN_LCD_DATA6_B,
- GPIO_FN_VI1_6_A, GPIO_FN_FD7_B, GPIO_FN_LCD_DATA7_B,
- GPIO_FN_VI1_7_A, GPIO_FN_FCE_B, GPIO_FN_LCD_DATA8_B,
- GPIO_FN_SSI_SCK0_A, GPIO_FN_TIOC1A_B, GPIO_FN_LCD_DATA9_B,
- GPIO_FN_SSI_WS0_A, GPIO_FN_TIOC1B_B, GPIO_FN_LCD_DATA10_B,
- GPIO_FN_SSI_SDATA0_A, GPIO_FN_VI1_0_B, GPIO_FN_TIOC2A_B,
- GPIO_FN_LCD_DATA11_B,
- GPIO_FN_SSI_SCK1_A, GPIO_FN_VI1_1_B, GPIO_FN_TIOC2B_B,
- GPIO_FN_LCD_DATA12_B,
- GPIO_FN_SSI_WS1_A, GPIO_FN_VI1_2_B, GPIO_FN_LCD_DATA13_B,
- GPIO_FN_SSI_SDATA1_A, GPIO_FN_VI1_3_B, GPIO_FN_LCD_DATA14_B,
-
- /* IPSR10 */
- GPIO_FN_SSI_SCK23, GPIO_FN_VI1_4_B, GPIO_FN_RX1_D, GPIO_FN_FCLE_B,
- GPIO_FN_LCD_DATA15_B,
- GPIO_FN_SSI_WS23, GPIO_FN_VI1_5_B, GPIO_FN_TX1_D, GPIO_FN_HSCK0_C,
- GPIO_FN_FALE_B, GPIO_FN_LCD_DON_B,
- GPIO_FN_SSI_SDATA2, GPIO_FN_VI1_6_B, GPIO_FN_HRX0_C, GPIO_FN_FRE_B,
- GPIO_FN_LCD_CL1_B,
- GPIO_FN_SSI_SDATA3, GPIO_FN_VI1_7_B, GPIO_FN_HTX0_C, GPIO_FN_FWE_B,
- GPIO_FN_LCD_CL2_B,
- GPIO_FN_AUDIO_CLKA_A, GPIO_FN_VI1_CLK_B, GPIO_FN_SCK1_D,
- GPIO_FN_IECLK_B, GPIO_FN_LCD_FLM_B,
- GPIO_FN_AUDIO_CLKB_A, GPIO_FN_LCD_CLK_B,
- GPIO_FN_AUDIO_CLKC, GPIO_FN_SCK1_E, GPIO_FN_HCTS0_C, GPIO_FN_FRB_B,
- GPIO_FN_LCD_VEPWC_B,
- GPIO_FN_AUDIO_CLKOUT, GPIO_FN_TX1_E, GPIO_FN_HRTS0_C, GPIO_FN_FSE_B,
- GPIO_FN_LCD_M_DISP_B,
- GPIO_FN_CAN_CLK_A, GPIO_FN_RX4_D,
- GPIO_FN_CAN0_TX_A, GPIO_FN_TX4_D, GPIO_FN_MLB_CLK,
- GPIO_FN_CAN1_RX_A, GPIO_FN_IRQ1_B,
- GPIO_FN_CAN0_RX_A, GPIO_FN_IRQ0_B, GPIO_FN_MLB_SIG,
- GPIO_FN_CAN1_TX_A, GPIO_FN_TX5_C, GPIO_FN_MLB_DAT,
-
- /* IPSR11 */
- GPIO_FN_SCL1, GPIO_FN_SCIF_CLK_C,
- GPIO_FN_SDA1, GPIO_FN_RX1_E,
- GPIO_FN_SDA0, GPIO_FN_HIFEBL_A,
- GPIO_FN_SDSELF, GPIO_FN_RTS1_E,
- GPIO_FN_SCIF_CLK_A, GPIO_FN_HSPI_CLK_A, GPIO_FN_VI0_CLK,
- GPIO_FN_RMII0_TXD0_A, GPIO_FN_ET0_ERXD4,
- GPIO_FN_SCK0_A, GPIO_FN_HSPI_CS_A, GPIO_FN_VI0_CLKENB,
- GPIO_FN_RMII0_TXD1_A, GPIO_FN_ET0_ERXD5,
- GPIO_FN_RX0_A, GPIO_FN_HSPI_RX_A, GPIO_FN_RMII0_RXD0_A,
- GPIO_FN_ET0_ERXD6,
- GPIO_FN_TX0_A, GPIO_FN_HSPI_TX_A,
- GPIO_FN_PENC1, GPIO_FN_TX3_D, GPIO_FN_CAN1_TX_B, GPIO_FN_TX5_D,
- GPIO_FN_IETX_B,
- GPIO_FN_USB_OVC1, GPIO_FN_RX3_D, GPIO_FN_CAN1_RX_B, GPIO_FN_RX5_D,
- GPIO_FN_IERX_B,
- GPIO_FN_DREQ0, GPIO_FN_SD1_CLK_A, GPIO_FN_ET0_TX_EN,
- GPIO_FN_DACK0, GPIO_FN_SD1_DAT3_A, GPIO_FN_ET0_TX_ER,
- GPIO_FN_DREQ1, GPIO_FN_HSPI_CLK_B, GPIO_FN_RX4_B, GPIO_FN_ET0_PHY_INT_C,
- GPIO_FN_ET0_TX_CLK_A,
- GPIO_FN_DACK1, GPIO_FN_HSPI_CS_B, GPIO_FN_TX4_B, GPIO_FN_ET0_RX_CLK_A,
- GPIO_FN_PRESETOUT, GPIO_FN_ST_CLKOUT,
-
-};
-
-#endif /* __ASM_SH7734_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
deleted file mode 100644
index 6781d41b7467d2..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7757.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7757_H__
-#define __ASM_SH7757_H__
-
-enum {
- /* PTA */
- GPIO_PTA0, GPIO_PTA1, GPIO_PTA2, GPIO_PTA3,
- GPIO_PTA4, GPIO_PTA5, GPIO_PTA6, GPIO_PTA7,
-
- /* PTB */
- GPIO_PTB0, GPIO_PTB1, GPIO_PTB2, GPIO_PTB3,
- GPIO_PTB4, GPIO_PTB5, GPIO_PTB6, GPIO_PTB7,
-
- /* PTC */
- GPIO_PTC0, GPIO_PTC1, GPIO_PTC2, GPIO_PTC3,
- GPIO_PTC4, GPIO_PTC5, GPIO_PTC6, GPIO_PTC7,
-
- /* PTD */
- GPIO_PTD0, GPIO_PTD1, GPIO_PTD2, GPIO_PTD3,
- GPIO_PTD4, GPIO_PTD5, GPIO_PTD6, GPIO_PTD7,
-
- /* PTE */
- GPIO_PTE0, GPIO_PTE1, GPIO_PTE2, GPIO_PTE3,
- GPIO_PTE4, GPIO_PTE5, GPIO_PTE6, GPIO_PTE7,
-
- /* PTF */
- GPIO_PTF0, GPIO_PTF1, GPIO_PTF2, GPIO_PTF3,
- GPIO_PTF4, GPIO_PTF5, GPIO_PTF6, GPIO_PTF7,
-
- /* PTG */
- GPIO_PTG0, GPIO_PTG1, GPIO_PTG2, GPIO_PTG3,
- GPIO_PTG4, GPIO_PTG5, GPIO_PTG6, GPIO_PTG7,
-
- /* PTH */
- GPIO_PTH0, GPIO_PTH1, GPIO_PTH2, GPIO_PTH3,
- GPIO_PTH4, GPIO_PTH5, GPIO_PTH6, GPIO_PTH7,
-
- /* PTI */
- GPIO_PTI0, GPIO_PTI1, GPIO_PTI2, GPIO_PTI3,
- GPIO_PTI4, GPIO_PTI5, GPIO_PTI6, GPIO_PTI7,
-
- /* PTJ */
- GPIO_PTJ0, GPIO_PTJ1, GPIO_PTJ2, GPIO_PTJ3,
- GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6,
-
- /* PTK */
- GPIO_PTK0, GPIO_PTK1, GPIO_PTK2, GPIO_PTK3,
- GPIO_PTK4, GPIO_PTK5, GPIO_PTK6, GPIO_PTK7,
-
- /* PTL */
- GPIO_PTL0, GPIO_PTL1, GPIO_PTL2, GPIO_PTL3,
- GPIO_PTL4, GPIO_PTL5, GPIO_PTL6,
-
- /* PTM */
- GPIO_PTM0, GPIO_PTM1, GPIO_PTM2, GPIO_PTM3,
- GPIO_PTM4, GPIO_PTM5, GPIO_PTM6, GPIO_PTM7,
-
- /* PTN */
- GPIO_PTN0, GPIO_PTN1, GPIO_PTN2, GPIO_PTN3,
- GPIO_PTN4, GPIO_PTN5, GPIO_PTN6,
-
- /* PTO */
- GPIO_PTO0, GPIO_PTO1, GPIO_PTO2, GPIO_PTO3,
- GPIO_PTO4, GPIO_PTO5, GPIO_PTO6, GPIO_PTO7,
-
- /* PTP */
- GPIO_PTP0, GPIO_PTP1, GPIO_PTP2, GPIO_PTP3,
- GPIO_PTP4, GPIO_PTP5, GPIO_PTP6, GPIO_PTP7,
-
- /* PTQ */
- GPIO_PTQ0, GPIO_PTQ1, GPIO_PTQ2, GPIO_PTQ3,
- GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6,
-
- /* PTR */
- GPIO_PTR0, GPIO_PTR1, GPIO_PTR2, GPIO_PTR3,
- GPIO_PTR4, GPIO_PTR5, GPIO_PTR6, GPIO_PTR7,
-
- /* PTS */
- GPIO_PTS0, GPIO_PTS1, GPIO_PTS2, GPIO_PTS3,
- GPIO_PTS4, GPIO_PTS5, GPIO_PTS6, GPIO_PTS7,
-
- /* PTT */
- GPIO_PTT0, GPIO_PTT1, GPIO_PTT2, GPIO_PTT3,
- GPIO_PTT4, GPIO_PTT5, GPIO_PTT6, GPIO_PTT7,
-
- /* PTU */
- GPIO_PTU0, GPIO_PTU1, GPIO_PTU2, GPIO_PTU3,
- GPIO_PTU4, GPIO_PTU5, GPIO_PTU6, GPIO_PTU7,
-
- /* PTV */
- GPIO_PTV0, GPIO_PTV1, GPIO_PTV2, GPIO_PTV3,
- GPIO_PTV4, GPIO_PTV5, GPIO_PTV6, GPIO_PTV7,
-
- /* PTW */
- GPIO_PTW0, GPIO_PTW1, GPIO_PTW2, GPIO_PTW3,
- GPIO_PTW4, GPIO_PTW5, GPIO_PTW6, GPIO_PTW7,
-
- /* PTX */
- GPIO_PTX0, GPIO_PTX1, GPIO_PTX2, GPIO_PTX3,
- GPIO_PTX4, GPIO_PTX5, GPIO_PTX6, GPIO_PTX7,
-
- /* PTY */
- GPIO_PTY0, GPIO_PTY1, GPIO_PTY2, GPIO_PTY3,
- GPIO_PTY4, GPIO_PTY5, GPIO_PTY6, GPIO_PTY7,
-
- /* PTZ */
- GPIO_PTZ0, GPIO_PTZ1, GPIO_PTZ2, GPIO_PTZ3,
- GPIO_PTZ4, GPIO_PTZ5, GPIO_PTZ6, GPIO_PTZ7,
-
-
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN_BS, GPIO_FN_RDWR, GPIO_FN_WE1, GPIO_FN_RDY,
- GPIO_FN_ET0_MDC, GPIO_FN_ET0_MDIO,
- GPIO_FN_ET1_MDC, GPIO_FN_ET1_MDIO,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN_IRQ15, GPIO_FN_IRQ14, GPIO_FN_IRQ13, GPIO_FN_IRQ12,
- GPIO_FN_IRQ11, GPIO_FN_IRQ10, GPIO_FN_IRQ9, GPIO_FN_IRQ8,
- GPIO_FN_ON_NRE, GPIO_FN_ON_NWE, GPIO_FN_ON_NWP, GPIO_FN_ON_NCE0,
- GPIO_FN_ON_R_B0, GPIO_FN_ON_ALE, GPIO_FN_ON_CLE,
- GPIO_FN_TCLK,
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN_IRQ7, GPIO_FN_IRQ6, GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_PWMU0, GPIO_FN_PWMU1, GPIO_FN_PWMU2, GPIO_FN_PWMU3,
- GPIO_FN_PWMU4, GPIO_FN_PWMU5,
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN_SP0_MOSI, GPIO_FN_SP0_MISO, GPIO_FN_SP0_SCK,
- GPIO_FN_SP0_SCK_FB, GPIO_FN_SP0_SS0, GPIO_FN_SP0_SS1,
- GPIO_FN_SP0_SS2, GPIO_FN_SP0_SS3, GPIO_FN_DREQ0,
- GPIO_FN_DACK0, GPIO_FN_TEND0,
-
- /* PTE (mobule: RMII) */
- GPIO_FN_RMII0_CRS_DV, GPIO_FN_RMII0_TXD1, GPIO_FN_RMII0_TXD0,
- GPIO_FN_RMII0_TXEN, GPIO_FN_RMII0_REFCLK, GPIO_FN_RMII0_RXD1,
- GPIO_FN_RMII0_RXD0, GPIO_FN_RMII0_RX_ER,
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN_RMII1_CRS_DV, GPIO_FN_RMII1_TXD1, GPIO_FN_RMII1_TXD0,
- GPIO_FN_RMII1_TXEN, GPIO_FN_RMII1_REFCLK, GPIO_FN_RMII1_RXD1,
- GPIO_FN_RMII1_RXD0, GPIO_FN_RMII1_RX_ER, GPIO_FN_RAC_RI,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN_BOOTFMS, GPIO_FN_BOOTWP,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_SERIRQ, GPIO_FN_WDTOVF,
- GPIO_FN_LPCPD, GPIO_FN_LDRQ, GPIO_FN_MMCCLK, GPIO_FN_MMCCMD,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN_SP1_MOSI, GPIO_FN_SP1_MISO,
- GPIO_FN_SP1_SCK, GPIO_FN_SP1_SCK_FB,
- GPIO_FN_SP1_SS0, GPIO_FN_SP1_SS1,
- GPIO_FN_WP, GPIO_FN_FMS0, GPIO_FN_TEND1, GPIO_FN_DREQ1,
- GPIO_FN_DACK1, GPIO_FN_ADTRG1, GPIO_FN_ADTRG0,
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_SD_WP, GPIO_FN_SD_CD, GPIO_FN_SD_CLK, GPIO_FN_SD_CMD,
- GPIO_FN_SD_D3, GPIO_FN_SD_D2, GPIO_FN_SD_D1, GPIO_FN_SD_D0,
-
- /* PTJ (mobule: SCIF234) */
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_RTS4, GPIO_FN_RXD4, GPIO_FN_TXD4,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN_COM2_TXD, GPIO_FN_COM2_RXD, GPIO_FN_COM2_RTS,
- GPIO_FN_COM2_CTS, GPIO_FN_COM2_DTR, GPIO_FN_COM2_DSR,
- GPIO_FN_COM2_DCD, GPIO_FN_CLKOUT,
- GPIO_FN_SCK2, GPIO_FN_SCK4, GPIO_FN_SCK3,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN_RAC_RXD, GPIO_FN_RAC_RTS, GPIO_FN_RAC_CTS,
- GPIO_FN_RAC_DTR, GPIO_FN_RAC_DSR, GPIO_FN_RAC_DCD,
- GPIO_FN_RAC_TXD, GPIO_FN_RXD2, GPIO_FN_CS5,
- GPIO_FN_CS6, GPIO_FN_AUDSYNC, GPIO_FN_AUDCK,
- GPIO_FN_TXD2,
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN_CS4, GPIO_FN_RD, GPIO_FN_WE0, GPIO_FN_CS0,
- GPIO_FN_SDA6, GPIO_FN_SCL6, GPIO_FN_SDA7, GPIO_FN_SCL7,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN_VBUS_EN, GPIO_FN_VBUS_OC, GPIO_FN_JMCTCK,
- GPIO_FN_JMCTMS, GPIO_FN_JMCTDO, GPIO_FN_JMCTDI,
- GPIO_FN_JMCTRST,
- GPIO_FN_SGPIO1_CLK, GPIO_FN_SGPIO1_LOAD, GPIO_FN_SGPIO1_DI,
- GPIO_FN_SGPIO1_DO, GPIO_FN_SUB_CLKIN,
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN_SGPIO0_CLK, GPIO_FN_SGPIO0_LOAD, GPIO_FN_SGPIO0_DI,
- GPIO_FN_SGPIO0_DO, GPIO_FN_SGPIO2_CLK, GPIO_FN_SGPIO2_LOAD,
- GPIO_FN_SGPIO2_DI, GPIO_FN_SGPIO2_DO, GPIO_FN_COM1_TXD,
- GPIO_FN_COM1_RXD, GPIO_FN_COM1_RTS, GPIO_FN_COM1_CTS,
-
- /* PTQ (mobule: LPC) */
- GPIO_FN_LAD3, GPIO_FN_LAD2, GPIO_FN_LAD1, GPIO_FN_LAD0,
- GPIO_FN_LFRAME, GPIO_FN_LRESET, GPIO_FN_LCLK,
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN_DDC3, GPIO_FN_DDC2, GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1, GPIO_FN_SDA0, GPIO_FN_SCL0,
- GPIO_FN_SDA8, GPIO_FN_SCL8,
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN_DDC1, GPIO_FN_DDC0, GPIO_FN_SDA5, GPIO_FN_SCL5,
- GPIO_FN_SDA4, GPIO_FN_SCL4, GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA9, GPIO_FN_SCL9,
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN_PWMX7, GPIO_FN_PWMX6, GPIO_FN_PWMX5, GPIO_FN_PWMX4,
- GPIO_FN_PWMX3, GPIO_FN_PWMX2, GPIO_FN_PWMX1, GPIO_FN_PWMX0,
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN_LGPIO7, GPIO_FN_LGPIO6, GPIO_FN_LGPIO5, GPIO_FN_LGPIO4,
- GPIO_FN_LGPIO3, GPIO_FN_LGPIO2, GPIO_FN_LGPIO1, GPIO_FN_LGPIO0,
- GPIO_FN_APMONCTL_O, GPIO_FN_APMPWBTOUT_O, GPIO_FN_APMSCI_O,
- GPIO_FN_APMVDDON, GPIO_FN_APMSLPBTN, GPIO_FN_APMPWRBTN,
- GPIO_FN_APMS5N, GPIO_FN_APMS3N,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_COM2_RI, GPIO_FN_R_SPI_MOSI, GPIO_FN_R_SPI_MISO,
- GPIO_FN_R_SPI_RSPCK, GPIO_FN_R_SPI_SSL0, GPIO_FN_R_SPI_SSL1,
- GPIO_FN_EVENT7, GPIO_FN_EVENT6, GPIO_FN_VBIOS_DI,
- GPIO_FN_VBIOS_DO, GPIO_FN_VBIOS_CLK, GPIO_FN_VBIOS_CS,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_EVENT5, GPIO_FN_EVENT4, GPIO_FN_EVENT3, GPIO_FN_EVENT2,
- GPIO_FN_EVENT1, GPIO_FN_EVENT0, GPIO_FN_CTS4, GPIO_FN_CTS2,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_RTS2, GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* PTY (mobule: LBSC) */
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN_MMCDAT7, GPIO_FN_MMCDAT6, GPIO_FN_MMCDAT5,
- GPIO_FN_MMCDAT4, GPIO_FN_MMCDAT3, GPIO_FN_MMCDAT2,
- GPIO_FN_MMCDAT1, GPIO_FN_MMCDAT0,
- GPIO_FN_ON_DQ7, GPIO_FN_ON_DQ6, GPIO_FN_ON_DQ5, GPIO_FN_ON_DQ4,
- GPIO_FN_ON_DQ3, GPIO_FN_ON_DQ2, GPIO_FN_ON_DQ1, GPIO_FN_ON_DQ0,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SDHI_TX,
- SHDMA_SLAVE_SDHI_RX,
- SHDMA_SLAVE_MMCIF_TX,
- SHDMA_SLAVE_MMCIF_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_RIIC0_TX,
- SHDMA_SLAVE_RIIC0_RX,
- SHDMA_SLAVE_RIIC1_TX,
- SHDMA_SLAVE_RIIC1_RX,
- SHDMA_SLAVE_RIIC2_TX,
- SHDMA_SLAVE_RIIC2_RX,
- SHDMA_SLAVE_RIIC3_TX,
- SHDMA_SLAVE_RIIC3_RX,
- SHDMA_SLAVE_RIIC4_TX,
- SHDMA_SLAVE_RIIC4_RX,
- SHDMA_SLAVE_RIIC5_TX,
- SHDMA_SLAVE_RIIC5_RX,
- SHDMA_SLAVE_RIIC6_TX,
- SHDMA_SLAVE_RIIC6_RX,
- SHDMA_SLAVE_RIIC7_TX,
- SHDMA_SLAVE_RIIC7_RX,
- SHDMA_SLAVE_RIIC8_TX,
- SHDMA_SLAVE_RIIC8_RX,
- SHDMA_SLAVE_RIIC9_TX,
- SHDMA_SLAVE_RIIC9_RX,
- SHDMA_SLAVE_RSPI_TX,
- SHDMA_SLAVE_RSPI_RX,
-};
-#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
deleted file mode 100644
index 37f42071e7d3b7..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7785.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7785_H__
-#define __ASM_SH7785_H__
-
-/* Boot Mode Pins:
- *
- * MODE0: CPG - Initial Pck/Bck Frequency [FRQMR1]
- * MODE1: CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1]
- * MODE2: CPG - Reserved (L: Normal operation)
- * MODE3: CPG - Reserved (L: Normal operation)
- * MODE4: CPG - Initial PLL setting (72x/36x)
- * MODE5: LBSC - Area0 Memory Type / Bus Width [CS0BCR.8]
- * MODE6: LBSC - Area0 Memory Type / Bus Width [CS0BCR.9]
- * MODE7: LBSC - Area0 Memory Type / Bus Width [CS0BCR.3]
- * MODE8: LBSC - Endian Mode (L: Big, H: Little) [BCR.31]
- * MODE9: LBSC - Master/Slave Mode (L: Slave) [BCR.30]
- * MODE10: CPG - Clock Input (L: Ext Clk, H: Crystal)
- * MODE11: PCI - Pin Mode (LL: PCI host, LH: PCI slave)
- * MODE12: PCI - Pin Mode (HL: Local bus, HH: DU)
- * MODE13: Boot Address Mode (L: 29-bit, H: 32-bit)
- * MODE14: Reserved (H: Normal operation)
- *
- * More information in sh7785 manual Rev.1.00, page 1628.
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
- GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* PK */
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* PL */
- GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
- GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
-
- /* PM */
- GPIO_PM1, GPIO_PM0,
-
- /* PN */
- GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
- GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
-
- /* PP */
- GPIO_PP5, GPIO_PP4,
- GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
-
- /* PQ */
- GPIO_PQ4,
- GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
-
- /* PR */
- GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
-
- GPIO_FN_D63_AD31,
- GPIO_FN_D62_AD30,
- GPIO_FN_D61_AD29,
- GPIO_FN_D60_AD28,
- GPIO_FN_D59_AD27,
- GPIO_FN_D58_AD26,
- GPIO_FN_D57_AD25,
- GPIO_FN_D56_AD24,
- GPIO_FN_D55_AD23,
- GPIO_FN_D54_AD22,
- GPIO_FN_D53_AD21,
- GPIO_FN_D52_AD20,
- GPIO_FN_D51_AD19,
- GPIO_FN_D50_AD18,
- GPIO_FN_D49_AD17_DB5,
- GPIO_FN_D48_AD16_DB4,
- GPIO_FN_D47_AD15_DB3,
- GPIO_FN_D46_AD14_DB2,
- GPIO_FN_D45_AD13_DB1,
- GPIO_FN_D44_AD12_DB0,
- GPIO_FN_D43_AD11_DG5,
- GPIO_FN_D42_AD10_DG4,
- GPIO_FN_D41_AD9_DG3,
- GPIO_FN_D40_AD8_DG2,
- GPIO_FN_D39_AD7_DG1,
- GPIO_FN_D38_AD6_DG0,
- GPIO_FN_D37_AD5_DR5,
- GPIO_FN_D36_AD4_DR4,
- GPIO_FN_D35_AD3_DR3,
- GPIO_FN_D34_AD2_DR2,
- GPIO_FN_D33_AD1_DR1,
- GPIO_FN_D32_AD0_DR0,
- GPIO_FN_REQ1,
- GPIO_FN_REQ2,
- GPIO_FN_REQ3,
- GPIO_FN_GNT1,
- GPIO_FN_GNT2,
- GPIO_FN_GNT3,
- GPIO_FN_MMCCLK,
- GPIO_FN_D31,
- GPIO_FN_D30,
- GPIO_FN_D29,
- GPIO_FN_D28,
- GPIO_FN_D27,
- GPIO_FN_D26,
- GPIO_FN_D25,
- GPIO_FN_D24,
- GPIO_FN_D23,
- GPIO_FN_D22,
- GPIO_FN_D21,
- GPIO_FN_D20,
- GPIO_FN_D19,
- GPIO_FN_D18,
- GPIO_FN_D17,
- GPIO_FN_D16,
- GPIO_FN_SCIF1_SCK,
- GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_TXD,
- GPIO_FN_SCIF0_CTS,
- GPIO_FN_INTD,
- GPIO_FN_FCE,
- GPIO_FN_SCIF0_RTS,
- GPIO_FN_HSPI_CS,
- GPIO_FN_FSE,
- GPIO_FN_SCIF0_SCK,
- GPIO_FN_HSPI_CLK,
- GPIO_FN_FRE,
- GPIO_FN_SCIF0_RXD,
- GPIO_FN_HSPI_RX,
- GPIO_FN_FRB,
- GPIO_FN_SCIF0_TXD,
- GPIO_FN_HSPI_TX,
- GPIO_FN_FWE,
- GPIO_FN_SCIF5_TXD,
- GPIO_FN_HAC1_SYNC,
- GPIO_FN_SSI1_WS,
- GPIO_FN_SIOF_TXD_PJ,
- GPIO_FN_HAC0_SDOUT,
- GPIO_FN_SSI0_SDATA,
- GPIO_FN_SIOF_RXD_PJ,
- GPIO_FN_HAC0_SDIN,
- GPIO_FN_SSI0_SCK,
- GPIO_FN_SIOF_SYNC_PJ,
- GPIO_FN_HAC0_SYNC,
- GPIO_FN_SSI0_WS,
- GPIO_FN_SIOF_MCLK_PJ,
- GPIO_FN_HAC_RES,
- GPIO_FN_SIOF_SCK_PJ,
- GPIO_FN_HAC0_BITCLK,
- GPIO_FN_SSI0_CLK,
- GPIO_FN_HAC1_BITCLK,
- GPIO_FN_SSI1_CLK,
- GPIO_FN_TCLK,
- GPIO_FN_IOIS16,
- GPIO_FN_STATUS0,
- GPIO_FN_DRAK0_PK3,
- GPIO_FN_STATUS1,
- GPIO_FN_DRAK1_PK2,
- GPIO_FN_DACK2,
- GPIO_FN_SCIF2_TXD,
- GPIO_FN_MMCCMD,
- GPIO_FN_SIOF_TXD_PK,
- GPIO_FN_DACK3,
- GPIO_FN_SCIF2_SCK,
- GPIO_FN_MMCDAT,
- GPIO_FN_SIOF_SCK_PK,
- GPIO_FN_DREQ0,
- GPIO_FN_DREQ1,
- GPIO_FN_DRAK0_PK1,
- GPIO_FN_DRAK1_PK0,
- GPIO_FN_DREQ2,
- GPIO_FN_INTB,
- GPIO_FN_DREQ3,
- GPIO_FN_INTC,
- GPIO_FN_DRAK2,
- GPIO_FN_CE2A,
- GPIO_FN_IRL4,
- GPIO_FN_FD4,
- GPIO_FN_IRL5,
- GPIO_FN_FD5,
- GPIO_FN_IRL6,
- GPIO_FN_FD6,
- GPIO_FN_IRL7,
- GPIO_FN_FD7,
- GPIO_FN_DRAK3,
- GPIO_FN_CE2B,
- GPIO_FN_BREQ_BSACK,
- GPIO_FN_BACK_BSREQ,
- GPIO_FN_SCIF5_RXD,
- GPIO_FN_HAC1_SDIN,
- GPIO_FN_SSI1_SCK,
- GPIO_FN_SCIF5_SCK,
- GPIO_FN_HAC1_SDOUT,
- GPIO_FN_SSI1_SDATA,
- GPIO_FN_SCIF3_TXD,
- GPIO_FN_FCLE,
- GPIO_FN_SCIF3_RXD,
- GPIO_FN_FALE,
- GPIO_FN_SCIF3_SCK,
- GPIO_FN_FD0,
- GPIO_FN_SCIF4_TXD,
- GPIO_FN_FD1,
- GPIO_FN_SCIF4_RXD,
- GPIO_FN_FD2,
- GPIO_FN_SCIF4_SCK,
- GPIO_FN_FD3,
- GPIO_FN_DEVSEL_DCLKOUT,
- GPIO_FN_STOP_CDE,
- GPIO_FN_LOCK_ODDF,
- GPIO_FN_TRDY_DISPL,
- GPIO_FN_IRDY_HSYNC,
- GPIO_FN_PCIFRAME_VSYNC,
- GPIO_FN_INTA,
- GPIO_FN_GNT0_GNTIN,
- GPIO_FN_REQ0_REQOUT,
- GPIO_FN_PERR,
- GPIO_FN_SERR,
- GPIO_FN_WE7_CBE3,
- GPIO_FN_WE6_CBE2,
- GPIO_FN_WE5_CBE1,
- GPIO_FN_WE4_CBE0,
- GPIO_FN_SCIF2_RXD,
- GPIO_FN_SIOF_RXD,
- GPIO_FN_MRESETOUT,
- GPIO_FN_IRQOUT,
-};
-
-#endif /* __ASM_SH7785_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
deleted file mode 100644
index d6cce65b48713f..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7786.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on sh7785.h
- */
-
-#ifndef __CPU_SH7786_H__
-#define __CPU_SH7786_H__
-
-#include <linux/io.h>
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1,
-
- /* DU */
- GPIO_FN_DCLKIN, GPIO_FN_DCLKOUT, GPIO_FN_ODDF,
- GPIO_FN_VSYNC, GPIO_FN_HSYNC, GPIO_FN_CDE, GPIO_FN_DISP,
- GPIO_FN_DR0, GPIO_FN_DG0, GPIO_FN_DB0,
- GPIO_FN_DR1, GPIO_FN_DG1, GPIO_FN_DB1,
- GPIO_FN_DR2, GPIO_FN_DG2, GPIO_FN_DB2,
- GPIO_FN_DR3, GPIO_FN_DG3, GPIO_FN_DB3,
- GPIO_FN_DR4, GPIO_FN_DG4, GPIO_FN_DB4,
- GPIO_FN_DR5, GPIO_FN_DG5, GPIO_FN_DB5,
-
- /* Eth */
- GPIO_FN_ETH_MAGIC, GPIO_FN_ETH_LINK, GPIO_FN_ETH_TX_ER,
- GPIO_FN_ETH_TX_EN, GPIO_FN_ETH_MDIO, GPIO_FN_ETH_RX_CLK,
- GPIO_FN_ETH_MDC, GPIO_FN_ETH_COL, GPIO_FN_ETH_TX_CLK,
- GPIO_FN_ETH_CRS, GPIO_FN_ETH_RX_DV, GPIO_FN_ETH_RX_ER,
- GPIO_FN_ETH_TXD3, GPIO_FN_ETH_TXD2, GPIO_FN_ETH_TXD1, GPIO_FN_ETH_TXD0,
- GPIO_FN_ETH_RXD3, GPIO_FN_ETH_RXD2, GPIO_FN_ETH_RXD1, GPIO_FN_ETH_RXD0,
-
- /* HSPI */
- GPIO_FN_HSPI_CLK, GPIO_FN_HSPI_CS, GPIO_FN_HSPI_RX, GPIO_FN_HSPI_TX,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_SCK,
- GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_TXD,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF3 */
- GPIO_FN_SCIF3_SCK, GPIO_FN_SCIF3_RXD, GPIO_FN_SCIF3_TXD,
-
- /* SCIF4 */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* LBSC */
- GPIO_FN_BREQ, GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* FLCTL */
- GPIO_FN_FALE, GPIO_FN_FRB, GPIO_FN_FSTATUS,
- GPIO_FN_FSE, GPIO_FN_FCLE,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* USB */
- GPIO_FN_USB_OVC0, GPIO_FN_USB_PENC0,
- GPIO_FN_USB_OVC1, GPIO_FN_USB_PENC1,
-
- /* HAC */
- GPIO_FN_HAC_RES,
- GPIO_FN_HAC0_SDOUT, GPIO_FN_HAC0_SDIN,
- GPIO_FN_HAC0_SYNC, GPIO_FN_HAC0_BITCLK,
- GPIO_FN_HAC1_SDOUT, GPIO_FN_HAC1_SDIN,
- GPIO_FN_HAC1_SYNC, GPIO_FN_HAC1_BITCLK,
-
- /* SSI */
- GPIO_FN_SSI0_SDATA, GPIO_FN_SSI0_SCK, GPIO_FN_SSI0_WS, GPIO_FN_SSI0_CLK,
- GPIO_FN_SSI1_SDATA, GPIO_FN_SSI1_SCK, GPIO_FN_SSI1_WS, GPIO_FN_SSI1_CLK,
- GPIO_FN_SSI2_SDATA, GPIO_FN_SSI2_SCK, GPIO_FN_SSI2_WS,
- GPIO_FN_SSI3_SDATA, GPIO_FN_SSI3_SCK, GPIO_FN_SSI3_WS,
-
- /* SDIF1 */
- GPIO_FN_SDIF1CMD, GPIO_FN_SDIF1CD, GPIO_FN_SDIF1WP, GPIO_FN_SDIF1CLK,
- GPIO_FN_SDIF1D3, GPIO_FN_SDIF1D2, GPIO_FN_SDIF1D1, GPIO_FN_SDIF1D0,
-
- /* SDIF0 */
- GPIO_FN_SDIF0CMD, GPIO_FN_SDIF0CD, GPIO_FN_SDIF0WP, GPIO_FN_SDIF0CLK,
- GPIO_FN_SDIF0D3, GPIO_FN_SDIF0D2, GPIO_FN_SDIF0D1, GPIO_FN_SDIF0D0,
-
- /* TMU */
- GPIO_FN_TCLK,
-
- /* INTC */
- GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
-};
-
-static inline u32 sh7786_mm_sel(void)
-{
- return __raw_readl((const volatile void __iomem *)0xFC400020) & 0x7;
-}
-
-#endif /* __CPU_SH7786_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/shx3.h b/arch/sh/include/cpu-sh4/cpu/shx3.h
deleted file mode 100644
index f356810b0bea58..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/shx3.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SHX3_H
-#define __CPU_SHX3_H
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* SCIF */
- GPIO_FN_SCK3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_SCK2, GPIO_FN_TXD2, GPIO_FN_RXD2,
- GPIO_FN_SCK1, GPIO_FN_TXD1, GPIO_FN_RXD1,
- GPIO_FN_SCK0, GPIO_FN_TXD0, GPIO_FN_RXD0,
-
- /* LBSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_WE3, GPIO_FN_WE2, GPIO_FN_CS6, GPIO_FN_CS5,
- GPIO_FN_CS4, GPIO_FN_CLKOUTENB, GPIO_FN_BREQ,
- GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* INTC */
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_IRL3, GPIO_FN_IRL2, GPIO_FN_IRL1, GPIO_FN_IRL0,
- GPIO_FN_IRQOUT, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-};
-
-#endif /* __CPU_SHX3_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
deleted file mode 100644
index 2cc5f55dcaddf4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
-#define __ASM_CPU_SH4_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
deleted file mode 100644
index 81966e41fc213b..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sq.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/sq.h
- *
- * Copyright (C) 2001, 2002, 2003 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#ifndef __ASM_CPU_SH4_SQ_H
-#define __ASM_CPU_SH4_SQ_H
-
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
- * mapped to any physical address space. Since data is written (and aligned)
- * to 32-byte boundaries, we need to be sure that all allocations are aligned.
- */
-#define SQ_SIZE 32
-#define SQ_ALIGN_MASK (~(SQ_SIZE - 1))
-#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
-
-#define SQ_QACR0 (P4SEG_REG_BASE + 0x38)
-#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c)
-#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000)
-
-/* arch/sh/kernel/cpu/sh4/sq.c */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot);
-void sq_unmap(unsigned long vaddr);
-void sq_flush_range(unsigned long start, unsigned int len);
-
-#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
deleted file mode 100644
index fa7bcb398b8cca..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Sitdikov Valentin
- */
-#ifndef __ASM_CPU_SH4_WATCHDOG_H
-#define __ASM_CPU_SH4_WATCHDOG_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/* Prefix definition */
-#define WTBST_HIGH 0x55
-/* Register definitions */
-#define WTCNT_R 0xffcc0010 /*WDTCNT*/
-#define WTCSR 0xffcc0004 /*WDTCSR*/
-#define WTCNT 0xffcc0000 /*WDTST*/
-#define WTST WTCNT
-#define WTBST 0xffcc0008 /*WDTBST*/
-/* Register definitions */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define WTCNT 0xa4520000
-#define WTCSR 0xa4520004
-#else
-/* Register definitions */
-#define WTCNT 0xffc00008
-#define WTCSR 0xffc0000c
-#endif
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH4_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
deleted file mode 100644
index bdbbba8a784a7b..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMAE0_IRQ evt2irq(0x6c0)
-#define SH_DMAC_BASE0 0xFF608020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMTE8_IRQ evt2irq(0xd80)
-#define DMTE9_IRQ evt2irq(0xda0)
-#define DMTE10_IRQ evt2irq(0xdc0)
-#define DMTE11_IRQ evt2irq(0xde0)
-#define DMAE0_IRQ evt2irq(0x6c0) /* DMA Error IRQ */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFC818020
-#else /* SH7785 */
-#define DMTE0_IRQ evt2irq(0x620)
-#define DMTE4_IRQ evt2irq(0x6a0)
-#define DMTE6_IRQ evt2irq(0x880)
-#define DMTE8_IRQ evt2irq(0x8c0)
-#define DMTE9_IRQ evt2irq(0x8e0)
-#define DMTE10_IRQ evt2irq(0x900)
-#define DMTE11_IRQ evt2irq(0x920)
-#define DMAE0_IRQ evt2irq(0x6e0) /* DMA Error IRQ0 */
-#define DMAE1_IRQ evt2irq(0x940) /* DMA Error IRQ1 */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFCC08020
-#endif
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4a/cpu/serial.h b/arch/sh/include/cpu-sh4a/cpu/serial.h
deleted file mode 100644
index fc206c0bf6fb06..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/serial.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH4A_SERIAL_H
-#define __CPU_SH4A_SERIAL_H
-
-/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */
-extern struct plat_sci_port_ops sh7722_sci_port_ops;
-
-#endif /* __CPU_SH4A_SERIAL_H */
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
deleted file mode 100644
index fb44c299d0337e..00000000000000
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses. */
-#define PA_NORFLASH_ADDR 0x00000000
-#define PA_NORFLASH_SIZE 0x04000000
-
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x0010) /* PCI Connector detect control */
-#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR (PA_BCR+0x0900) /* */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF (-1)
-
-#define PA_BCR 0xa5000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
-#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
-#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x000a) /* PCI Connector detect control */
-#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
-#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
-#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
-#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
-#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
-#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
-#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
-#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
-#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
-#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
-#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
-#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
-#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
-#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
-#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
-#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
-
-#define PA_AX88796L 0xa5800400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_PCISCR (PA_BCR+0x0000)
-#define PA_IRLPRA (PA_BCR+0x0002)
-#define PA_IRLPRB (PA_BCR+0x0004)
-#define PA_IRLPRC (PA_BCR+0x0006)
-#define PA_IRLPRD (PA_BCR+0x0008)
-#define IRLCNTR1 (PA_BCR+0x0010)
-#define PA_IRLPRE (PA_BCR+0x000a)
-#define PA_IRLPRF (PA_BCR+0x000c)
-#define PA_EXIRLCR (PA_BCR+0x000e)
-#define PA_IRLMCR1 (PA_BCR+0x0010)
-#define PA_IRLMCR2 (PA_BCR+0x0012)
-#define PA_IRLSSR1 (PA_BCR+0x0014)
-#define PA_IRLSSR2 (PA_BCR+0x0016)
-#define PA_CFTCR (PA_BCR+0x0100)
-#define PA_CFPCR (PA_BCR+0x0102)
-#define PA_PCICR (PA_BCR+0x0110)
-#define PA_IVDRCTL (PA_BCR+0x0112)
-#define PA_IVDRSR (PA_BCR+0x0114)
-#define PA_PDRSTCR (PA_BCR+0x0116)
-#define PA_POFF (PA_BCR+0x0120)
-#define PA_LCDCR (PA_BCR+0x0130)
-#define PA_TPCR (PA_BCR+0x0140)
-#define PA_TPCKCR (PA_BCR+0x0142)
-#define PA_TPRSTR (PA_BCR+0x0144)
-#define PA_TPXPDR (PA_BCR+0x0146)
-#define PA_TPYPDR (PA_BCR+0x0148)
-#define PA_GPIOPFR (PA_BCR+0x0150)
-#define PA_GPIODR (PA_BCR+0x0152)
-#define PA_OBLED (PA_BCR+0x0154)
-#define PA_SWSR (PA_BCR+0x0156)
-#define PA_VERREG (PA_BCR+0x0158)
-#define PA_SMCR (PA_BCR+0x0200)
-#define PA_SMSMADR (PA_BCR+0x0202)
-#define PA_SMMR (PA_BCR+0x0204)
-#define PA_SMSADR1 (PA_BCR+0x0206)
-#define PA_SMSADR32 (PA_BCR+0x0244)
-#define PA_SMTRDR1 (PA_BCR+0x0246)
-#define PA_SMTRDR16 (PA_BCR+0x0264)
-#define PA_CU3MDR (PA_BCR+0x0300)
-#define PA_CU5MDR (PA_BCR+0x0302)
-#define PA_MMSR (PA_BCR+0x0400)
-
-#define IVDR_CK_ON 4 /* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE 200
-#define HL_NR_IRL 15
-
-#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#ifdef CONFIG_SH_R7785RP
-void highlander_plat_pinmux_setup(void);
-#else
-#define highlander_plat_pinmux_setup() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
deleted file mode 100644
index 71241f0d02a19c..00000000000000
--- a/arch/sh/include/mach-common/mach/hp6xx.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
- */
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-#include <linux/sh_intc.h>
-
-#define HP680_BTN_IRQ evt2irq(0x600) /* IRQ0_IRQ */
-#define HP680_TS_IRQ evt2irq(0x660) /* IRQ3_IRQ */
-#define HP680_HD64461_IRQ evt2irq(0x680) /* IRQ4_IRQ */
-
-#define DAC_LCD_BRIGHTNESS 0
-#define DAC_SPEAKER_VOLUME 1
-
-#define PGDR_OPENED 0x01
-#define PGDR_MAIN_BATTERY_OUT 0x04
-#define PGDR_PLAY_BUTTON 0x08
-#define PGDR_REWIND_BUTTON 0x10
-#define PGDR_RECORD_BUTTON 0x20
-
-#define PHDR_TS_PEN_DOWN 0x08
-
-#define PJDR_LED_BLINK 0x02
-
-#define PKDR_LED_GREEN 0x10
-
-/* HP Palmtop 620lx/660lx speaker on/off */
-#define PKDR_SPEAKER 0x20
-
-#define SCPDR_TS_SCAN_ENABLE 0x20
-#define SCPDR_TS_SCAN_Y 0x02
-#define SCPDR_TS_SCAN_X 0x01
-
-#define SCPCR_TS_ENABLE 0x405
-#define SCPCR_TS_MASK 0xc0f
-
-#define ADC_CHANNEL_TS_Y 1
-#define ADC_CHANNEL_TS_X 2
-#define ADC_CHANNEL_BATTERY 3
-#define ADC_CHANNEL_BACKUP 4
-#define ADC_CHANNEL_CHARGE 5
-
-/* HP Jornada 680/690 speaker on/off */
-#define HD64461_GPADR_SPEAKER 0x01
-#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF 0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
-#define HD64461_GPBDR_LED_RED 0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR 0xa4000130
-#define PKDR 0xa4000132
-
-#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/mach-common/mach/lboxre2.h b/arch/sh/include/mach-common/mach/lboxre2.h
deleted file mode 100644
index 5b6bb8e3cf2847..00000000000000
--- a/arch/sh/include/mach-common/mach/lboxre2.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LBOXRE2_H
-#define __ASM_SH_LBOXRE2_H
-
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 support
- */
-#include <linux/sh_intc.h>
-
-#define IRQ_CF1 evt2irq(0x320) /* CF1 */
-#define IRQ_CF0 evt2irq(0x340) /* CF0 */
-#define IRQ_INTD evt2irq(0x360) /* INTD */
-#define IRQ_ETH1 evt2irq(0x380) /* Ether1 */
-#define IRQ_ETH0 evt2irq(0x3a0) /* Ether0 */
-#define IRQ_INTA evt2irq(0x3c0) /* INTA */
-
-void init_lboxre2_IRQ(void);
-
-#define __IO_PREFIX lboxre2
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
deleted file mode 100644
index c2d218cea74b65..00000000000000
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/magicpanelr2.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * I/O addresses and bitmasks for Magic Panel Release 2 board
- */
-
-#ifndef __ASM_SH_MAGICPANELR2_H
-#define __ASM_SH_MAGICPANELR2_H
-
-#include <linux/gpio.h>
-
-#define __IO_PREFIX mpr2
-#include <asm/io_generic.h>
-
-
-#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
-
-
-#define PA_LED PORT_PADR /* LED */
-
-
-/* BSC */
-#define CMNCR 0xA4FD0000UL
-#define CS0BCR 0xA4FD0004UL
-#define CS2BCR 0xA4FD0008UL
-#define CS3BCR 0xA4FD000CUL
-#define CS4BCR 0xA4FD0010UL
-#define CS5ABCR 0xA4FD0014UL
-#define CS5BBCR 0xA4FD0018UL
-#define CS6ABCR 0xA4FD001CUL
-#define CS6BBCR 0xA4FD0020UL
-#define CS0WCR 0xA4FD0024UL
-#define CS2WCR 0xA4FD0028UL
-#define CS3WCR 0xA4FD002CUL
-#define CS4WCR 0xA4FD0030UL
-#define CS5AWCR 0xA4FD0034UL
-#define CS5BWCR 0xA4FD0038UL
-#define CS6AWCR 0xA4FD003CUL
-#define CS6BWCR 0xA4FD0040UL
-
-
-/* usb */
-
-#define PORT_UTRCTL 0xA405012CUL
-#define PORT_UCLKCR_W 0xA40A0008UL
-
-#define INTC_ICR0 0xA414FEE0UL
-#define INTC_ICR1 0xA4140010UL
-#define INTC_ICR2 0xA4140012UL
-
-/* MTD */
-
-#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
-#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
-
-#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/mach-common/mach/mangle-port.h b/arch/sh/include/mach-common/mach/mangle-port.h
deleted file mode 100644
index dd5a761a52ee63..00000000000000
--- a/arch/sh/include/mach-common/mach/mangle-port.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH version cribbed from the MIPS copy:
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __MACH_COMMON_MANGLE_PORT_H
-#define __MACH_COMMON_MANGLE_PORT_H
-
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time. Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses. The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) le16_to_cpu(x)
-# define __mem_ioswabw(x) (x)
-# define ioswabl(x) le32_to_cpu(x)
-# define __mem_ioswabl(x) (x)
-# define ioswabq(x) le64_to_cpu(x)
-# define __mem_ioswabq(x) (x)
-
-#else
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) (x)
-# define __mem_ioswabw(x) cpu_to_le16(x)
-# define ioswabl(x) (x)
-# define __mem_ioswabl(x) cpu_to_le32(x)
-# define ioswabq(x) (x)
-# define __mem_ioswabq(x) cpu_to_le32(x)
-
-#endif
-
-#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
deleted file mode 100644
index 0e2f9ab1197620..00000000000000
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA. should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
-#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts. i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA 8
-#define MICRODEV_IRQ_PCI_INTB 9
-#define MICRODEV_IRQ_PCI_INTC 10
-#define MICRODEV_IRQ_PCI_INTD 11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
deleted file mode 100644
index 0d7e483c7d3f53..00000000000000
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
-#define PA_CFCTL 0xa4000004 /* CF Timing control */
-#define PA_CFPOW 0xa4000006 /* CF Power control */
-#define PA_DISPCTL 0xa4000008 /* Display Timing control */
-#define PA_SDMPOW 0xa400000a /* SD Power control */
-#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extension detect control */
-#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
-#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */
-#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
-#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */
-#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-
-#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
-#define PA_VERREG 0xa4000032 /* FPGA Version Register */
-#define PA_INPORT 0xa4000034 /* KEY Input Port control */
-#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_BVERREG 0xa4000038 /* Board Revision Register */
-
-#define PA_AX88796L 0xaa000400 /* AX88796L Area */
-#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE 100
-
-#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
deleted file mode 100644
index 1915714263aab0..00000000000000
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* do nothing here by default */
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-common/mach/sdk7780.h b/arch/sh/include/mach-common/mach/sdk7780.h
deleted file mode 100644
index a27dbe4184b35b..00000000000000
--- a/arch/sh/include/mach-common/mach/sdk7780.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SDK7780_H
-#define __ASM_SH_RENESAS_SDK7780_H
-
-/*
- * linux/include/asm-sh/sdk7780.h
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa0800000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_USER PA_EXT4 /* User Expansion Space */
-
-#define PA_PERIPHERAL PA_AREA5_IO
-
-/* SRAM/Reserved */
-#define PA_RESERVED (PA_PERIPHERAL + 0)
-/* FPGA base address */
-#define PA_FPGA (PA_PERIPHERAL + 0x01000000)
-/* SMC LAN91C111 */
-#define PA_LAN (PA_PERIPHERAL + 0x01800000)
-
-
-#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */
-#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */
-#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */
-#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */
-#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */
-#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */
-#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */
-#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */
-#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */
-#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */
-#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */
-#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */
-#define PA_LED FPGA_SLEDR
-#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */
-#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */
-#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */
-#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */
-#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */
-#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */
-#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */
-#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */
-#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */
-#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */
-#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */
-#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */
-
-
-#define SDK7780_NR_IRL 15
-/* IDE/ATA interrupt */
-#define IRQ_CFCARD evt2irq(0x3c0)
-/* SMC interrupt */
-#define IRQ_ETHERNET evt2irq(0x2c0)
-
-
-/* arch/sh/boards/renesas/sdk7780/irq.c */
-void init_sdk7780_IRQ(void);
-
-#define __IO_PREFIX sdk7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/mach-common/mach/secureedge5410.h b/arch/sh/include/mach-common/mach/secureedge5410.h
deleted file mode 100644
index dfc68aa910033d..00000000000000
--- a/arch/sh/include/mach-common/mach/secureedge5410.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#define __IO_PREFIX snapgear
-#include <asm/io_generic.h>
-
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit Read Write
- * -----------------------------------------------
- * D0 DCD on ttySC1 power
- * D1 Reset Switch heatbeat
- * D2 ttySC0 CTS (7100) LAN
- * D3 - WAN
- * D4 ttySC0 DCD (7100) CONSOLE
- * D5 - ONLINE
- * D6 - VPN
- * D7 - DTR on ttySC1
- * D8 - ttySC0 RTS (7100)
- * D9 - ttySC0 DTR (7100)
- * D10 - RTC SCLK
- * D11 RTC DATA RTC DATA
- * D12 - RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/sh2007.h b/arch/sh/include/mach-common/mach/sh2007.h
deleted file mode 100644
index eeb12901a44a1b..00000000000000
--- a/arch/sh/include/mach-common/mach/sh2007.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SH2007_H
-#define __MACH_SH2007_H
-
-#define CS5BCR 0xff802050
-#define CS5WCR 0xff802058
-#define CS5PCR 0xff802070
-
-#define BUS_SZ8 1
-#define BUS_SZ16 2
-#define BUS_SZ32 3
-
-#define PCMCIA_IODYN 1
-#define PCMCIA_ATA 0
-#define PCMCIA_IO8 2
-#define PCMCIA_IO16 3
-#define PCMCIA_COMM8 4
-#define PCMCIA_COMM16 5
-#define PCMCIA_ATTR8 6
-#define PCMCIA_ATTR16 7
-
-#define TYPE_SRAM 0
-#define TYPE_PCMCIA 4
-
-/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWW5 0
-#define IWW6 3
-/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWD5 2
-#define IWRWD6 2
-/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWS5 2
-#define IWRWS6 2
-/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRD5 2
-#define IWRRD6 2
-/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRS5 0
-#define IWRRS6 2
-/* burst count (0-3:4,8,16,32) */
-#define BST5 0
-#define BST6 0
-/* bus size */
-#define SZ5 BUS_SZ16
-#define SZ6 BUS_SZ16
-/* RD hold for SRAM (0-1:0,1) */
-#define RDSPL5 0
-#define RDSPL6 0
-/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
-#define BW5 0
-#define BW6 0
-/* Multiplex (0-1:0,1) */
-#define MPX5 0
-#define MPX6 0
-/* device type */
-#define TYPE5 TYPE_PCMCIA
-#define TYPE6 TYPE_PCMCIA
-/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADS5 0
-#define ADS6 0
-/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADH5 0
-#define ADH6 0
-/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDS5 0
-#define RDS6 0
-/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDH5 0
-#define RDH6 0
-/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTS5 0
-#define WTS6 0
-/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTH5 0
-#define WTH6 0
-/* BS hold (0-1:1,2) */
-#define BSH5 0
-#define BSH6 0
-/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define IW5 6 /* 60ns PIO mode 4 */
-#define IW6 15 /* 250ns */
-
-#define SAA5 PCMCIA_IODYN /* IDE area b4000000-b5ffffff */
-#define SAB5 PCMCIA_IODYN /* CF area b6000000-b7ffffff */
-#define PCWA5 0 /* additional wait A (0-3:0,15,30,50) */
-#define PCWB5 0 /* additional wait B (0-3:0,15,30,50) */
-/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define PCIW5 12
-/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEDA5 2
-/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEDB5 4
-/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEHA5 2
-/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEHB5 3
-
-#define CS5BCR_D ((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)| \
- (IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)| \
- (SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
-#define CS5WCR_D ((ADS5<<28)|(ADH5<<24)|(RDS5<<20)| \
- (RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
-#define CS5PCR_D ((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)| \
- (PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)| \
- (TEDB5<<8)|(TEHA5<<4)|TEHB5)
-
-#define SMC0_BASE 0xb0800000 /* eth0 */
-#define SMC1_BASE 0xb0900000 /* eth1 */
-#define CF_BASE 0xb6100000 /* Compact Flash (I/O area) */
-#define IDE_BASE 0xb4000000 /* IDE */
-#define PC104_IO_BASE 0xb8000000
-#define PC104_MEM_BASE 0xba000000
-#define SMC_IO_SIZE 0x100
-
-#define CF_OFFSET 0x1f0
-#define IDE_OFFSET 0x170
-
-#endif /* __MACH_SH2007_H */
diff --git a/arch/sh/include/mach-common/mach/sh7763rdp.h b/arch/sh/include/mach-common/mach/sh7763rdp.h
deleted file mode 100644
index 301f85a1c044d2..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7763rdp.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH7763RDP_H
-#define __ASM_SH_SH7763RDP_H
-
-/*
- * linux/include/asm-sh/sh7763drp.h
- *
- * Copyright (C) 2008 Renesas Solutions
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <asm/addrspace.h>
-
-/* clock control */
-#define MSTPCR1 0xFFC80038
-
-/* PORT */
-#define PORT_PSEL0 0xFFEF0070
-#define PORT_PSEL1 0xFFEF0072
-#define PORT_PSEL2 0xFFEF0074
-#define PORT_PSEL3 0xFFEF0076
-#define PORT_PSEL4 0xFFEF0078
-
-#define PORT_PACR 0xFFEF0000
-#define PORT_PCCR 0xFFEF0004
-#define PORT_PFCR 0xFFEF000A
-#define PORT_PGCR 0xFFEF000C
-#define PORT_PHCR 0xFFEF000E
-#define PORT_PICR 0xFFEF0010
-#define PORT_PJCR 0xFFEF0012
-#define PORT_PKCR 0xFFEF0014
-#define PORT_PLCR 0xFFEF0016
-#define PORT_PMCR 0xFFEF0018
-#define PORT_PNCR 0xFFEF001A
-
-/* FPGA */
-#define CPLD_BOARD_ID_ERV_REG 0xB1000000
-#define CPLD_CPLD_CMD_REG 0xB1000006
-
-/*
- * USB SH7763RDP board can use Host only.
- */
-#define USB_USBHSC 0xFFEC80f0
-
-/* arch/sh/boards/renesas/sh7763rdp/irq.c */
-void init_sh7763rdp_IRQ(void);
-int sh7763rdp_irq_demux(int irq);
-#define __IO_PREFIX sh7763rdp
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
deleted file mode 100644
index 0f3dc3a1329e36..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SH7785LCR_H
-#define __ASM_SH_RENESAS_SH7785LCR_H
-
-/*
- * This board has 2 physical memory maps.
- * It can be changed with DIP switch(S2-5).
- *
- * phys address | S2-5 = OFF | S2-5 = ON
- * -----------------------------+---------------+---------------
- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
- * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
- * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
- * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
- * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
- * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
- * 0x14000000 - 0x17ffffff(CS5) | reserved | USB
- * 0x18000000 - 0x1bffffff(CS6) | reserved | SD
- * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
- *
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define PLD_BASE_ADDR 0x04000000
-#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
-#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
-#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
-#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
-#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
-#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
-#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
-#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
-
-#define PCA9564_ADDR 0x06000000 /* I2C */
-#define PCA9564_SIZE 0x00000100
-
-#define PCA9564_PROTO_32BIT_ADDR 0x14000000
-
-#define SM107_MEM_ADDR 0x10000000
-#define SM107_MEM_SIZE 0x00e00000
-#define SM107_REG_ADDR 0x13e00000
-#define SM107_REG_SIZE 0x00200000
-
-#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
-#define R8A66597_ADDR 0x14000000 /* USB */
-#define CG200_ADDR 0x18000000 /* SD */
-#else
-#define R8A66597_ADDR 0x08000000
-#define CG200_ADDR 0x0c000000
-#endif
-
-#define R8A66597_SIZE 0x00000100
-#define CG200_SIZE 0x00010000
-
-#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
-
diff --git a/arch/sh/include/mach-common/mach/shmin.h b/arch/sh/include/mach-common/mach/shmin.h
deleted file mode 100644
index c2c3e26d145312..00000000000000
--- a/arch/sh/include/mach-common/mach/shmin.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
deleted file mode 100644
index 54df351de5e40d..00000000000000
--- a/arch/sh/include/mach-common/mach/titan.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Platform definitions for Titan
- */
-#ifndef _ASM_SH_TITAN_H
-#define _ASM_SH_TITAN_H
-
-#include <linux/sh_intc.h>
-
-#define __IO_PREFIX titan
-#include <asm/io_generic.h>
-
-/* IRQ assignments */
-#define TITAN_IRQ_WAN evt2irq(0x240) /* eth0 (WAN) */
-#define TITAN_IRQ_LAN evt2irq(0x2a0) /* eth1 (LAN) */
-#define TITAN_IRQ_MPCIA evt2irq(0x300) /* mPCI A */
-#define TITAN_IRQ_MPCIB evt2irq(0x360) /* mPCI B */
-#define TITAN_IRQ_USB evt2irq(0x360) /* USB */
-
-#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h
deleted file mode 100644
index 6c9bff3f93f143..00000000000000
--- a/arch/sh/include/mach-common/mach/urquell.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_URQUELL_H
-#define __MACH_URQUELL_H
-
-/*
- * ------ 0x00000000 ------------------------------------
- * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
- * -----+ 0x04000000 ------------------------------------
- * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
- * -----+ 0x08000000 ------------------------------------
- * CS2 | DDR3
- * CS3 |
- * -----+ 0x10000000 ------------------------------------
- * CS4 | PCIe
- * -----+ 0x14000000 ------------------------------------
- * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
- * -----+ 0x18000000 ------------------------------------
- * CS6 | ATA, NAND FLASH
- * -----+ 0x1c000000 ------------------------------------
- * CS7 | SH7786 register
- * -----+------------------------------------------------
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define CS1_BASE 0x05000000
-#define CS5_BASE 0x15000000
-#define FPGA_BASE CS1_BASE
-
-#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
-#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
-
-#define SRSTR_OFS 0x0000 /* System reset register */
-#define BDMR_OFS 0x0010 /* Board operating mode resister */
-#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
-#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
-#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
-#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
-#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
-#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
-#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
-#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
-#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
-#define SLEDR_OFS 0x0130 /* LED control resister */
-#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
-#define FPVERR_OFS 0x0150 /* FPGA Version register */
-#define FPDATER_OFS 0x0160 /* FPGA Date register */
-#define FPYEARR_OFS 0x0170 /* FPGA Year register */
-#define TCLKCR_OFS 0x0180 /* TCLK Control register */
-#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
-#define FPODR_OFS 0x1010 /* Output port data register */
-#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
-#define FPINDR_OFS 0x1030 /* Input port data register */
-#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
-#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
-#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
-#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
-#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
-#define LATCHCR_OFS 0x3000 /* Latch control register */
-#define LATCUAR_OFS 0x3010 /* Latch upper address register */
-#define LATCLAR_OFS 0x3012 /* Latch lower address register */
-#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
-#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
-
-#define CHARLED_OFS 0x2000 /* Character LED */
-
-#endif /* __MACH_URQUELL_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
deleted file mode 100644
index a773a763843aaa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/dma.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/dma.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_DMA_H
-#define __ASM_SH_DREAMCAST_DMA_H
-
-/* Number of DMA channels */
-#define G2_NR_DMA_CHANNELS 4
-
-/* Channels for cascading */
-#define PVR2_CASCADE_CHAN 2
-#define G2_CASCADE_CHAN 3
-
-/* PVR2 DMA Registers */
-#define PVR2_DMA_BASE 0xa05f6800
-#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0)
-#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4)
-#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8)
-#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132)
-#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136)
-
-/* G2 DMA Register */
-#define G2_DMA_BASE 0xa05f7800
-
-#endif /* __ASM_SH_DREAMCAST_DMA_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
deleted file mode 100644
index 169bdf415d89aa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/maple.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MAPLE_H
-#define __ASM_MAPLE_H
-
-#define MAPLE_PORTS 4
-#define MAPLE_PNP_INTERVAL HZ
-#define MAPLE_MAXPACKETS 8
-#define MAPLE_DMA_ORDER 14
-#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
-#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
- MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
-
-/* Maple Bus registers */
-#define MAPLE_BASE 0xa05f6c00
-#define MAPLE_DMAADDR (MAPLE_BASE+0x04)
-#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
-#define MAPLE_ENABLE (MAPLE_BASE+0x14)
-#define MAPLE_STATE (MAPLE_BASE+0x18)
-#define MAPLE_SPEED (MAPLE_BASE+0x80)
-#define MAPLE_RESET (MAPLE_BASE+0x8c)
-
-#define MAPLE_MAGIC 0x6155404f
-#define MAPLE_2MBPS 0
-#define MAPLE_TIMEOUT(n) ((n)<<15)
-
-/* Function codes */
-#define MAPLE_FUNC_CONTROLLER 0x001
-#define MAPLE_FUNC_MEMCARD 0x002
-#define MAPLE_FUNC_LCD 0x004
-#define MAPLE_FUNC_CLOCK 0x008
-#define MAPLE_FUNC_MICROPHONE 0x010
-#define MAPLE_FUNC_ARGUN 0x020
-#define MAPLE_FUNC_KEYBOARD 0x040
-#define MAPLE_FUNC_LIGHTGUN 0x080
-#define MAPLE_FUNC_PURUPURU 0x100
-#define MAPLE_FUNC_MOUSE 0x200
-
-#endif /* __ASM_MAPLE_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
deleted file mode 100644
index c037c1ec63a928..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/pci.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <mach-dreamcast/mach/sysasic.h>
-
-#define GAPSPCI_REGS 0x01001400
-#define GAPSPCI_DMA_BASE 0x01840000
-#define GAPSPCI_DMA_SIZE 32768
-#define GAPSPCI_BBA_CONFIG 0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE 0x2000
-
-#define GAPSPCI_IRQ HW_EVENT_EXTERNAL
-
-extern struct pci_ops gapspci_pci_ops;
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
deleted file mode 100644
index ed69ce7f203012..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/sysasic.h
- *
- * Definitions for the Dreamcast System ASIC and related peripherals.
- *
- * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
-#define __ASM_SH_DREAMCAST_SYSASIC_H
-
-#include <asm/irq.h>
-
-/* Hardware events -
-
- Each of these events correspond to a bit within the Event Mask Registers/
- Event Status Registers. Because of the virtual IRQ numbering scheme, a
- base offset must be used when calculating the virtual IRQ that each event
- takes.
-*/
-
-#define HW_EVENT_IRQ_BASE 48
-
-/* IRQ 13 */
-#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */
-#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
-#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
-#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
-#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
-
-/* IRQ 11 */
-#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
-#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
-#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
-
-#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
-
-/* arch/sh/boards/mach-dreamcast/irq.c */
-extern int systemasic_irq_demux(int);
-extern void systemasic_irq_init(void);
-
-#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
-
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
deleted file mode 100644
index 2d685cc2d54ced..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2009 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
-LIST "--------------------------------"
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-LIST "--------------------------------"
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "MMU"
-ED 0xff000010, 0x00000004
-
-LIST "setup clocks"
-ED 0xa4150024, 0x00004000
-ED 0xa4150000, 0x8E003508
-
-WAIT 1
-
-LIST "BSC"
-ED 0xff800020, 0xa5a50000
-ED 0xfec10000, 0x00001013
-ED 0xfec10004, 0x11110400
-ED 0xfec10024, 0x00000440
-
-WAIT 1
-
-LIST "setup sdram"
-ED 0xfd000108, 0x00000181
-ED 0xfd000020, 0x015B0002
-ED 0xfd000030, 0x03061502
-ED 0xfd000034, 0x02020102
-ED 0xfd000038, 0x01090305
-ED 0xfd00003c, 0x00000002
-ED 0xfd000008, 0x00000005
-ED 0xfd000018, 0x00000001
-
-WAIT 1
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000060, 0x00020000
-ED 0xfd000060, 0x00030000
-ED 0xfd000060, 0x00010040
-ED 0xfd000060, 0x00000532
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000014, 0x00000004
-ED 0xfd000060, 0x00000432
-ED 0xfd000060, 0x000103C0
-ED 0xfd000060, 0x00010040
-
-WAIT 1
-
-ED 0xfd000010, 0x00000001
-ED 0xfd000044, 0x00000613
-ED 0xfd000048, 0x238C003A
-ED 0xfd000014, 0x00000002
-
-LIST "Dummy read"
-DD 0x0c400000, 0x0c400000
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000108, 0x00000080
-ED 0xfd000040, 0x00010000
-
-WAIT 1
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
-
-LIST "disable USB"
-EW 0xA4D80000, 0x0000
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
deleted file mode 100644
index 2da6ff326cbd0a..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* EcoVec board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1 : .long 0xa8000000
-2 :
-
-#else /* __ASSEMBLY__ */
-
-/* Ecovec board specific information:
- *
- * Set the following to enable MMCIF boot from the MMC card in CN12:
- *
- * DS1.5 = OFF (SH BOOT pin set to L)
- * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
- * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1)
- *
- */
-#define HIZCRA 0xa4050158
-#define PGDR 0xa405012c
-
-static inline void mmcif_update_progress(int nr)
-{
- /* disable Hi-Z for LED pins */
- __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
-
- /* update progress on LED4, LED5, LED6 and LED7 */
- __raw_writeb(1 << (nr - 1), PGDR);
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
deleted file mode 100644
index 0e97473afe0bb9..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KFR2R09_H
-#define __ASM_SH_KFR2R09_H
-
-#include <video/sh_mobile_lcdc.h>
-
-#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-#else
-static int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
- return -ENODEV;
-}
-static void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
-}
-#endif
-
-#endif /* __ASM_SH_KFR2R09_H */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
deleted file mode 100644
index a67b1926be222e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
-LIST "set up enough of the kfr2r09 hardware to boot the kernel"
-
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "invalidate instruction cache"
-ED 0xff00001c, 0x00000800
-
-LIST "invalidate TLBs"
-ED 0xff000010, 0x00000004
-
-LIST "select mode for cs5 + cs6"
-ED 0xff800020, 0xa5a50001
-ED 0xfec10000, 0x0000001b
-
-LIST "setup clocks"
-LIST "The PLL and FLL values are updated here for the optimal"
-LIST "RF frequency and improved reception sensitivity."
-ED 0xa4150004, 0x00000050
-ED 0xa4150000, 0x91053508
-WAIT 1
-ED 0xa4150050, 0x00000340
-ED 0xa4150024, 0x00005000
-
-LIST "setup pins"
-EB 0xa4050120, 0x00
-EB 0xa4050122, 0x00
-EB 0xa4050124, 0x00
-EB 0xa4050126, 0x00
-EB 0xa4050128, 0xA0
-EB 0xa405012A, 0x10
-EB 0xa405012C, 0x00
-EB 0xa405012E, 0x00
-EB 0xa4050130, 0x00
-EB 0xa4050132, 0x00
-EB 0xa4050134, 0x01
-EB 0xa4050136, 0x40
-EB 0xa4050138, 0x00
-EB 0xa405013A, 0x00
-EB 0xa405013C, 0x00
-EB 0xa405013E, 0x20
-EB 0xa4050160, 0x00
-EB 0xa4050162, 0x40
-EB 0xa4050164, 0x03
-EB 0xa4050166, 0x00
-EB 0xa4050168, 0x00
-EB 0xa405016A, 0x00
-EB 0xa405016C, 0x00
-
-EW 0xa405014E, 0x5660
-EW 0xa4050150, 0x0145
-EW 0xa4050152, 0x1550
-EW 0xa4050154, 0x0200
-EW 0xa4050156, 0x0040
-
-EW 0xa4050158, 0x0000
-EW 0xa405015a, 0x0000
-EW 0xa405015c, 0x0000
-EW 0xa405015e, 0x0000
-
-EW 0xa4050180, 0x0000
-EW 0xa4050182, 0x8002
-EW 0xa4050184, 0x0000
-
-EW 0xa405018a, 0x9991
-EW 0xa405018c, 0x8011
-EW 0xa405018e, 0x9550
-
-EW 0xa4050100, 0x0000
-EW 0xa4050102, 0x5540
-EW 0xa4050104, 0x0000
-EW 0xa4050106, 0x0000
-EW 0xa4050108, 0x4550
-EW 0xa405010a, 0x0130
-EW 0xa405010c, 0x0555
-EW 0xa405010e, 0x0000
-EW 0xa4050110, 0x0000
-EW 0xa4050112, 0xAAA8
-EW 0xa4050114, 0x8305
-EW 0xa4050116, 0x10F0
-EW 0xa4050118, 0x0F50
-EW 0xa405011a, 0x0000
-EW 0xa405011c, 0x0000
-EW 0xa405011e, 0x0555
-EW 0xa4050140, 0x0000
-EW 0xa4050142, 0x5141
-EW 0xa4050144, 0x5005
-EW 0xa4050146, 0xAAA9
-EW 0xa4050148, 0xFAA9
-EW 0xa405014a, 0x3000
-EW 0xa405014c, 0x0000
-
-LIST "setup sdram"
-ED 0xFD000108, 0x40000301
-ED 0xFD000020, 0x011B0002
-ED 0xFD000030, 0x03060E02
-ED 0xFD000034, 0x01020102
-ED 0xFD000038, 0x01090406
-ED 0xFD000008, 0x00000004
-ED 0xFD000040, 0x00000001
-ED 0xFD000040, 0x00000000
-ED 0xFD000018, 0x00000001
-
-WAIT 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000060, 0x00000032
-ED 0xFD000060, 0x00020000
-ED 0xFD000014, 0x00000004
-ED 0xFD000014, 0x00000004
-ED 0xFD000010, 0x00000001
-ED 0xFD000044, 0x000004AF
-ED 0xFD000048, 0x20CF0037
-
-LIST "read 16 bytes from sdram"
-DD 0xa8000000, 0xa8000000, 1
-DD 0xa8000004, 0xa8000004, 1
-DD 0xa8000008, 0xa8000008, 1
-DD 0xa800000c, 0xa800000c, 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000014, 0x00000004
-ED 0xFD000108, 0x40000300
-ED 0xFD000040, 0x00010000
-
-LIST "write to internal ram"
-ED 0xfd8007fc, 0
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
deleted file mode 100644
index 209275872ff06e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* kfr2r09 board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 0xa8000000
-2:
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
deleted file mode 100644
index b954de617b4970..00000000000000
--- a/arch/sh/include/mach-landisk/mach/gio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LANDISK_GIO_H
-#define __ASM_SH_LANDISK_GIO_H
-
-#include <linux/ioctl.h>
-
-/* version */
-#define VERSION_STR "1.00"
-
-/* Driver name */
-#define GIO_DRIVER_NAME "/dev/giodrv"
-
-/* Use 'k' as magic number */
-#define GIODRV_IOC_MAGIC 'k'
-
-#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0)
-/*
- * S means "Set" through a ptr,
- * T means "Tell" directly
- * G means "Get" (to a pointed var)
- * Q means "Query", response is on the return value
- * X means "eXchange": G and S atomically
- * H means "sHift": T and Q atomically
- */
-#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *)
-#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *)
-#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *)
-#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *)
-#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *)
-#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *)
-#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *)
-#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
-#define GIODRV_IOC_MAXNR 8
-
-#define GIO_READ 0x00000000
-#define GIO_WRITE 0x00000001
-
-#endif /* __ASM_SH_LANDISK_GIO_H */
diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
deleted file mode 100644
index b41308c94d1e94..00000000000000
--- a/arch/sh/include/mach-landisk/mach/iodata_landisk.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IODATA_LANDISK_H
-#define __ASM_SH_IODATA_LANDISK_H
-
-/*
- * arch/sh/include/mach-landisk/mach/iodata_landisk.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * IO-DATA LANDISK support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_USB 0xa4000000 /* USB Controller M66590 */
-
-#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */
-#define PA_LED 0xb0000001 /* LED Control Register */
-#define PA_STATUS 0xb0000002 /* Switch Status Register */
-#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */
-#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */
-#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */
-/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */
-#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */
-
-#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */
-#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */
-
-#define IRQ_PCIINTA evt2irq(0x2a0) /* PCI INTA IRQ */
-#define IRQ_PCIINTB evt2irq(0x2c0) /* PCI INTB IRQ */
-#define IRQ_PCIINTC evt2irq(0x2e0) /* PCI INTC IRQ */
-#define IRQ_PCIINTD evt2irq(0x300) /* PCI INTD IRQ */
-#define IRQ_ATA evt2irq(0x320) /* ATA IRQ */
-#define IRQ_FATA evt2irq(0x340) /* FATA IRQ */
-#define IRQ_POWER evt2irq(0x360) /* Power Switch IRQ */
-#define IRQ_BUTTON evt2irq(0x380) /* USL-5P Button IRQ */
-#define IRQ_FAULT evt2irq(0x3a0) /* USL-5P Fault IRQ */
-
-void init_landisk_IRQ(void);
-
-#define __IO_PREFIX landisk
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_IODATA_LANDISK_H */
-
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
deleted file mode 100644
index 2a422b778e008f..00000000000000
--- a/arch/sh/include/mach-migor/mach/migor.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-#define PORT_MSELCRA 0xa4050180
-#define PORT_MSELCRB 0xa4050182
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
deleted file mode 100644
index 76c2e84893cc61..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_FPGA_H
-#define __MACH_SDK7786_FPGA_H
-
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#define SRSTR 0x000
-#define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
-
-#define INTASR 0x010
-#define INTAMR 0x020
-#define MODSWR 0x030
-#define INTTESTR 0x040
-#define SYSSR 0x050
-#define NRGPR 0x060
-
-#define NMISR 0x070
-#define NMISR_MAN_NMI BIT(0)
-#define NMISR_AUX_NMI BIT(1)
-#define NMISR_MASK (NMISR_MAN_NMI | NMISR_AUX_NMI)
-
-#define NMIMR 0x080
-#define NMIMR_MAN_NMIM BIT(0) /* Manual NMI mask */
-#define NMIMR_AUX_NMIM BIT(1) /* Auxiliary NMI mask */
-#define NMIMR_MASK (NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
-
-#define INTBSR 0x090
-#define INTBMR 0x0a0
-#define USRLEDR 0x0b0
-#define MAPSWR 0x0c0
-#define FPGAVR 0x0d0
-#define FPGADR 0x0e0
-#define PCBRR 0x0f0
-#define RSR 0x100
-#define EXTASR 0x110
-#define SPCAR 0x120
-#define INTMSR 0x130
-
-#define PCIECR 0x140
-#define PCIECR_PCIEMUX1 BIT(15)
-#define PCIECR_PCIEMUX0 BIT(14)
-#define PCIECR_PRST4 BIT(12) /* slot 4 card present */
-#define PCIECR_PRST3 BIT(11) /* slot 3 card present */
-#define PCIECR_PRST2 BIT(10) /* slot 2 card present */
-#define PCIECR_PRST1 BIT(9) /* slot 1 card present */
-#define PCIECR_CLKEN BIT(4) /* oscillator enable */
-
-#define FAER 0x150
-#define USRGPIR 0x160
-
-/* 0x170 reserved */
-
-#define LCLASR 0x180
-#define LCLASR_FRAMEN BIT(15)
-
-#define LCLASR_FPGA_SEL_SHIFT 12
-#define LCLASR_NAND_SEL_SHIFT 8
-#define LCLASR_NORB_SEL_SHIFT 4
-#define LCLASR_NORA_SEL_SHIFT 0
-
-#define LCLASR_AREA_MASK 0x7
-
-#define LCLASR_FPGA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_FPGA_SEL_SHIFT)
-#define LCLASR_NAND_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NAND_SEL_SHIFT)
-#define LCLASR_NORB_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORB_SEL_SHIFT)
-#define LCLASR_NORA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORA_SEL_SHIFT)
-
-#define SBCR 0x190
-#define SCBR_I2CMEN BIT(0) /* FPGA I2C master enable */
-#define SCBR_I2CCEN BIT(1) /* CPU I2C master enable */
-
-#define PWRCR 0x1a0
-#define PWRCR_SCISEL0 BIT(0)
-#define PWRCR_SCISEL1 BIT(1)
-#define PWRCR_SCIEN BIT(2) /* Serial port enable */
-#define PWRCR_PDWNACK BIT(5) /* Power down acknowledge */
-#define PWRCR_PDWNREQ BIT(7) /* Power down request */
-#define PWRCR_INT2 BIT(11) /* INT2 connection to power manager */
-#define PWRCR_BUPINIT BIT(13) /* DDR backup initialize */
-#define PWRCR_BKPRST BIT(15) /* Backup power reset */
-
-#define SPCBR 0x1b0
-#define SPICR 0x1c0
-#define SPIDR 0x1d0
-#define I2CCR 0x1e0
-#define I2CDR 0x1f0
-#define FPGACR 0x200
-#define IASELR1 0x210
-#define IASELR2 0x220
-#define IASELR3 0x230
-#define IASELR4 0x240
-#define IASELR5 0x250
-#define IASELR6 0x260
-#define IASELR7 0x270
-#define IASELR8 0x280
-#define IASELR9 0x290
-#define IASELR10 0x2a0
-#define IASELR11 0x2b0
-#define IASELR12 0x2c0
-#define IASELR13 0x2d0
-#define IASELR14 0x2e0
-#define IASELR15 0x2f0
-/* 0x300 reserved */
-#define IBSELR1 0x310
-#define IBSELR2 0x320
-#define IBSELR3 0x330
-#define IBSELR4 0x340
-#define IBSELR5 0x350
-#define IBSELR6 0x360
-#define IBSELR7 0x370
-#define IBSELR8 0x380
-#define IBSELR9 0x390
-#define IBSELR10 0x3a0
-#define IBSELR11 0x3b0
-#define IBSELR12 0x3c0
-#define IBSELR13 0x3d0
-#define IBSELR14 0x3e0
-#define IBSELR15 0x3f0
-#define USRACR 0x400
-#define BEEPR 0x410
-#define USRLCDR 0x420
-#define SMBCR 0x430
-#define SMBDR 0x440
-#define USBCR 0x450
-#define AMSR 0x460
-#define ACCR 0x470
-#define SDIFCR 0x480
-
-/* arch/sh/boards/mach-sdk7786/fpga.c */
-extern void __iomem *sdk7786_fpga_base;
-extern void sdk7786_fpga_init(void);
-
-/* arch/sh/boards/mach-sdk7786/nmi.c */
-extern void sdk7786_nmi_init(void);
-
-#define SDK7786_FPGA_REGADDR(reg) (sdk7786_fpga_base + (reg))
-
-/*
- * A convenience wrapper from register offset to internal I2C address,
- * when the FPGA is in I2C slave mode.
- */
-#define SDK7786_FPGA_I2CADDR(reg) ((reg) >> 3)
-
-static inline u16 fpga_read_reg(unsigned int reg)
-{
- return ioread16(sdk7786_fpga_base + reg);
-}
-
-static inline void fpga_write_reg(u16 val, unsigned int reg)
-{
- iowrite16(val, sdk7786_fpga_base + reg);
-}
-
-#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/irq.h b/arch/sh/include/mach-sdk7786/mach/irq.h
deleted file mode 100644
index 3343380907b2db..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_IRQ_H
-#define __MACH_SDK7786_IRQ_H
-
-/* arch/sh/boards/mach-sdk7786/irq.c */
-extern void sdk7786_init_irq(void);
-
-#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/arch/sh/include/mach-se/mach/mrshpc.h b/arch/sh/include/mach-se/mach/mrshpc.h
deleted file mode 100644
index 4e260f399b79c3..00000000000000
--- a/arch/sh/include/mach-se/mach/mrshpc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SE_MRSHPC_H
-#define __MACH_SE_MRSHPC_H
-
-#include <linux/io.h>
-
-static inline void __init mrshpc_setup_windows(void)
-{
- if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0)
- return; /* Not detected */
-
- if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) {
- __raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
- } else {
- __raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
- }
-
- /*
- * PC-Card window open
- * flag == COMMON/ATTRIBUTE/IO
- */
- /* common window open */
- __raw_writew(0x8a84, MRSHPC_MW0CR1);
- if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* common mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0b00, MRSHPC_MW0CR2);
- else
- /* common mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0300, MRSHPC_MW0CR2);
-
- /* attribute window open */
- __raw_writew(0x8a85, MRSHPC_MW1CR1);
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* attribute mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0a00, MRSHPC_MW1CR2);
- else
- /* attribute mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0200, MRSHPC_MW1CR2);
-
- /* I/O window open */
- __raw_writew(0x8a86, MRSHPC_IOWCR1);
- __raw_writew(0x0008, MRSHPC_CDCR); /* I/O card mode */
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- __raw_writew(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
- else
- __raw_writew(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
-
- __raw_writew(0x2000, MRSHPC_ICR);
- __raw_writeb(0x00, PA_MRSHPC_MW2 + 0x206);
- __raw_writeb(0x42, PA_MRSHPC_MW2 + 0x200);
-}
-
-#endif /* __MACH_SE_MRSHPC_H */
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
deleted file mode 100644
index aa83fe1ff0b124..00000000000000
--- a/arch/sh/include/mach-se/mach/se.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE_H
-#define __ASM_SH_HITACHI_SE_H
-
-/*
- * linux/include/asm-sh/hitachi_se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_83902 0xb0000000 /* DP83902A */
-#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */
-#define PA_83902_RST 0xb0080000 /* DP83902A reset port */
-
-#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */
-#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */
-#define PA_LED 0xb0c00000 /* LED */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define PA_BCR 0xb0e00000
-#else
-#define PA_BCR 0xb1400000 /* FPGA */
-#endif
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define INTC_IRR0 0xa4000004UL
-#define INTC_IRR1 0xa4000006UL
-#define INTC_IRR2 0xa4000008UL
-
-#define INTC_ICR0 0xfffffee0UL
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR2 0xa4000012UL
-#define INTC_INTER 0xa4000014UL
-
-#define INTC_IPRC 0xa4000016UL
-#define INTC_IPRD 0xa4000018UL
-#define INTC_IPRE 0xa400001aUL
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC evt2irq(0x380)
-#define IRQ_CFCARD evt2irq(0x3c0)
-#else
-#define IRQ_STNIC evt2irq(0x340)
-#define IRQ_CFCARD evt2irq(0x2e0)
-#endif
-
-/* SH Ether support (SH7710/SH7712) */
-/* Base address */
-#define SH_ETH0_BASE 0xA7000000
-#define SH_ETH1_BASE 0xA7000400
-#define SH_TSU_BASE 0xA7000800
-/* PHY ID */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-# define PHY_ID 0x00
-#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
-# define PHY_ID 0x01
-#endif
-/* Ether IRQ */
-#define SH_ETH0_IRQ evt2irq(0xc00)
-#define SH_ETH1_IRQ evt2irq(0xc20)
-#define SH_TSU_IRQ evt2irq(0xc40)
-
-void init_se_IRQ(void);
-
-#define __IO_PREFIX se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
deleted file mode 100644
index cf190279bb1d7e..00000000000000
--- a/arch/sh/include/mach-se/mach/se7206.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7206_H
-#define __ASM_SH_SE7206_H
-
-#define PA_SMSC 0x30000000
-#define PA_MRSHPC 0x34000000
-#define PA_LED 0x31400000
-
-void init_se7206_IRQ(void);
-
-#define __IO_PREFIX se7206
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7206_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
deleted file mode 100644
index 107fb5f3ef8056..00000000000000
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-/* Area 0 */
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM 0x00400000 /* Flash ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
-#define PA_SRAM 0x00800000 /* SRAM */
-#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-/* Area 2 */
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-/* Area 3 */
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-/* Area 4 */
-#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED 0xb0C00000 /* LED */
-#define LED_SHIFT 0
-#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-/* Area 5 */
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-/* Area 6 */
-#define PA_LCD1 0xb8000000
-#define PA_LCD2 0xb8800000
-
-#define PORT_PACR 0xA4050100
-#define PORT_PBCR 0xA4050102
-#define PORT_PCCR 0xA4050104
-#define PORT_PDCR 0xA4050106
-#define PORT_PECR 0xA4050108
-#define PORT_PFCR 0xA405010A
-#define PORT_PGCR 0xA405010C
-#define PORT_PHCR 0xA405010E
-#define PORT_PJCR 0xA4050110
-#define PORT_PKCR 0xA4050112
-#define PORT_PLCR 0xA4050114
-#define PORT_PMCR 0xA4050116
-#define PORT_PNCR 0xA4050118
-#define PORT_PQCR 0xA405011A
-#define PORT_PRCR 0xA405011C
-#define PORT_PSCR 0xA405011E
-#define PORT_PTCR 0xA4050140
-#define PORT_PUCR 0xA4050142
-#define PORT_PVCR 0xA4050144
-#define PORT_PWCR 0xA4050146
-#define PORT_PYCR 0xA4050148
-#define PORT_PZCR 0xA405014A
-
-#define PORT_PSELA 0xA405014C
-#define PORT_PSELB 0xA405014E
-#define PORT_PSELC 0xA4050150
-#define PORT_PSELD 0xA4050152
-#define PORT_PSELE 0xA4050154
-
-#define PORT_HIZCRA 0xA4050156
-#define PORT_HIZCRB 0xA4050158
-#define PORT_HIZCRC 0xA405015C
-
-#define PORT_DRVCR 0xA4050180
-
-#define PORT_PADR 0xA4050120
-#define PORT_PBDR 0xA4050122
-#define PORT_PCDR 0xA4050124
-#define PORT_PDDR 0xA4050126
-#define PORT_PEDR 0xA4050128
-#define PORT_PFDR 0xA405012A
-#define PORT_PGDR 0xA405012C
-#define PORT_PHDR 0xA405012E
-#define PORT_PJDR 0xA4050130
-#define PORT_PKDR 0xA4050132
-#define PORT_PLDR 0xA4050134
-#define PORT_PMDR 0xA4050136
-#define PORT_PNDR 0xA4050138
-#define PORT_PQDR 0xA405013A
-#define PORT_PRDR 0xA405013C
-#define PORT_PTDR 0xA4050160
-#define PORT_PUDR 0xA4050162
-#define PORT_PVDR 0xA4050164
-#define PORT_PWDR 0xA4050166
-#define PORT_PYDR 0xA4050168
-
-#define FPGA_IN 0xb1400000
-#define FPGA_OUT 0xb1400002
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ4_IRQ evt2irq(0x680)
-#define IRQ5_IRQ evt2irq(0x6a0)
-
-#define SE7343_FPGA_IRQ_MRSHPC0 0
-#define SE7343_FPGA_IRQ_MRSHPC1 1
-#define SE7343_FPGA_IRQ_MRSHPC2 2
-#define SE7343_FPGA_IRQ_MRSHPC3 3
-#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */
-#define SE7343_FPGA_IRQ_USB 8
-#define SE7343_FPGA_IRQ_UARTA 10
-#define SE7343_FPGA_IRQ_UARTB 11
-
-#define SE7343_FPGA_IRQ_NR 12
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7343/irq.c */
-extern struct irq_domain *se7343_irq_domain;
-
-void init_7343se_IRQ(void);
-
-#endif /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
deleted file mode 100644
index 82226d40faf528..00000000000000
--- a/arch/sh/include/mach-se/mach/se7721.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-
-#ifndef __ASM_SH_SE7721_H
-#define __ASM_SH_SE7721_H
-
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 2 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB8000000
-
-#define PA_PCIC PA_PERIPHERAL
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0)
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000)
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000)
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED 0xB6800000 /* 8bit LED */
-#define PA_FPGA 0xB7000000 /* FPGA base address */
-
-#define MRSHPC_IRQ0 evt2irq(0x340)
-
-#define FPGA_ILSR1 (PA_FPGA + 0x02)
-#define FPGA_ILSR2 (PA_FPGA + 0x03)
-#define FPGA_ILSR3 (PA_FPGA + 0x04)
-#define FPGA_ILSR4 (PA_FPGA + 0x05)
-#define FPGA_ILSR5 (PA_FPGA + 0x06)
-#define FPGA_ILSR6 (PA_FPGA + 0x07)
-#define FPGA_ILSR7 (PA_FPGA + 0x08)
-#define FPGA_ILSR8 (PA_FPGA + 0x09)
-
-void init_se7721_IRQ(void);
-
-#define __IO_PREFIX se7721
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7721_H */
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
deleted file mode 100644
index efb761f9f6e0e8..00000000000000
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7722_H
-#define __ASM_SH_SE7722_H
-
-/*
- * linux/include/asm-sh/se7722.h
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB0000000
-
-#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
-#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
-
-#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
-/* GPIO */
-#define FPGA_IN 0xb1840000UL
-#define FPGA_OUT 0xb1840004UL
-
-#define PORT_PECR 0xA4050108UL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PSELD 0xA4050154UL
-#define PORT_PSELB 0xA4050150UL
-
-#define PORT_PSELC 0xA4050152UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PRCR 0xA405011CUL
-#define PORT_PXCR 0xA4050148UL
-#define PORT_PSELA 0xA405014EUL
-#define PORT_PYCR 0xA405014AUL
-#define PORT_PZCR 0xA405014CUL
-#define PORT_HIZCRA 0xA4050158UL
-#define PORT_HIZCRC 0xA405015CUL
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-
-#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */
-#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */
-#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
-#define SE7722_FPGA_IRQ_NR 6
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7722/irq.c */
-extern struct irq_domain *se7722_irq_domain;
-
-void init_se7722_IRQ(void);
-
-#define __IO_PREFIX se7722
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7722_H */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
deleted file mode 100644
index 1fe28820dfa953..00000000000000
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7724_H
-#define __ASM_SH_SE7724_H
-
-/*
- * linux/include/asm-sh/se7724.h
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Hitachi UL SolutionEngine 7724 Support.
- *
- * Based on se7722.h
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
-#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
-
-#define PA_LED (0xba203000) /* 8bit LED */
-#define IRQ_MODE (0xba200010)
-#define IRQ0_SR (0xba200014)
-#define IRQ1_SR (0xba200018)
-#define IRQ2_SR (0xba20001c)
-#define IRQ0_MR (0xba200020)
-#define IRQ1_MR (0xba200024)
-#define IRQ2_MR (0xba200028)
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ2_IRQ evt2irq(0x640)
-
-/* Bits in IRQ012 registers */
-#define SE7724_FPGA_IRQ_BASE 220
-
-/* IRQ0 */
-#define IRQ0_BASE SE7724_FPGA_IRQ_BASE
-#define IRQ0_KEY (IRQ0_BASE + 12)
-#define IRQ0_RMII (IRQ0_BASE + 13)
-#define IRQ0_SMC (IRQ0_BASE + 14)
-#define IRQ0_MASK 0x7fff
-#define IRQ0_END IRQ0_SMC
-/* IRQ1 */
-#define IRQ1_BASE (IRQ0_END + 1)
-#define IRQ1_TS (IRQ1_BASE + 0)
-#define IRQ1_MASK 0x0001
-#define IRQ1_END IRQ1_TS
-/* IRQ2 */
-#define IRQ2_BASE (IRQ1_END + 1)
-#define IRQ2_USB0 (IRQ1_BASE + 0)
-#define IRQ2_USB1 (IRQ1_BASE + 1)
-#define IRQ2_MASK 0x0003
-#define IRQ2_END IRQ2_USB1
-
-#define SE7724_FPGA_IRQ_NR (IRQ2_END - IRQ0_BASE)
-
-/* arch/sh/boards/se/7724/irq.c */
-void init_se7724_IRQ(void);
-
-#define __IO_PREFIX se7724
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7724_H */
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
deleted file mode 100644
index ee5b5e6e597970..00000000000000
--- a/arch/sh/include/mach-se/mach/se7751.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_7751SE_H
-#define __ASM_SH_HITACHI_7751SE_H
-
-/*
- * linux/include/asm-sh/hitachi_7751se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
-
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 evt2irq(0x3a0)
-
-void init_7751se_IRQ(void);
-
-#define __IO_PREFIX sh7751se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
deleted file mode 100644
index 24f0ac82f8b330..00000000000000
--- a/arch/sh/include/mach-se/mach/se7780.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7780_H
-#define __ASM_SH_SE7780_H
-
-/*
- * linux/include/asm-sh/se7780.h
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */
-#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */
-
-#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */
-
-#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */
-#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */
-#define DISP_CHAR_RAM (7 << 3)
-#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0)
-#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1)
-#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2)
-#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3)
-#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4)
-#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5)
-#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6)
-#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7)
-
-#define DISP_UDC_RAM (5 << 3)
-#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */
-
-/* FPGA register address and bit */
-#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */
-#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */
-#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */
-#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */
-#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */
-#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */
-#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */
-#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */
-#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */
-#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */
-#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */
-#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */
-#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */
-#define PA_LED FPGA_DBG_LED
-#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */
-#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */
-#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */
-
-/* FPGA INTSEL position */
-/* INTSEL1 */
-#define IRQPOS_SMC91CX (0 * 4)
-#define IRQPOS_SM501 (1 * 4)
-/* INTSEL2 */
-#define IRQPOS_EXTINT1 (0 * 4)
-#define IRQPOS_EXTINT2 (1 * 4)
-#define IRQPOS_EXTINT3 (2 * 4)
-#define IRQPOS_EXTINT4 (3 * 4)
-/* INTSEL3 */
-#define IRQPOS_PCCPW (0 * 4)
-
-/* IDE interrupt */
-#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */
-
-/* SMC interrupt */
-#define SMC_IRQ evt2irq(0x300)
-
-/* SM501 interrupt */
-#define SM501_IRQ evt2irq(0x200)
-
-/* interrupt pin */
-#define IRQPIN_EXTINT1 0 /* IRQ0 pin */
-#define IRQPIN_EXTINT2 1 /* IRQ1 pin */
-#define IRQPIN_EXTINT3 2 /* IRQ2 pin */
-#define IRQPIN_SMC91CX 3 /* IRQ3 pin */
-#define IRQPIN_EXTINT4 4 /* IRQ4 pin */
-#define IRQPIN_PCC0 5 /* IRQ5 pin */
-#define IRQPIN_PCC2 6 /* IRQ6 pin */
-#define IRQPIN_SM501 7 /* IRQ7 pin */
-#define IRQPIN_PCCPW 7 /* IRQ7 pin */
-
-/* arch/sh/boards/se/7780/irq.c */
-void init_se7780_IRQ(void);
-
-#define __IO_PREFIX se7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7780_H */
diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h
deleted file mode 100644
index 5eacdabd71b6cb..00000000000000
--- a/arch/sh/include/mach-sh03/mach/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/sh03/io.h
- *
- * Copyright 2004 Interface Co.,Ltd. Saito.K
- *
- * IO functions for an Interface CTP/PCI-SH03
- */
-
-#ifndef _ASM_SH_IO_SH03_H
-#define _ASM_SH_IO_SH03_H
-
-#include <linux/time.h>
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-
-void heartbeat_sh03(void);
-
-#endif /* _ASM_SH_IO_SH03_H */
diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
deleted file mode 100644
index 4ced684b16a4d4..00000000000000
--- a/arch/sh/include/mach-sh03/mach/sh03.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH03_H
-#define __ASM_SH_SH03_H
-
-/*
- * linux/include/asm-sh/sh03/sh03.h
- *
- * Copyright (C) 2004 Interface Co., Ltd. Saito.K
- *
- * Interface CTP/PCI-SH03 support
- */
-
-#define PA_PCI_IO (0xbe240000) /* PCI I/O space */
-#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */
-
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#endif /* __ASM_SH_SH03_H */
diff --git a/arch/sh/include/mach-x3proto/mach/hardware.h b/arch/sh/include/mach-x3proto/mach/hardware.h
deleted file mode 100644
index 57ea4a5cca359d..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/hardware.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_X3PROTO_HARDWARE_H
-#define __MACH_X3PROTO_HARDWARE_H
-
-struct gpio_chip;
-
-/* arch/sh/boards/mach-x3proto/gpio.c */
-int x3proto_gpio_setup(void);
-extern struct gpio_chip x3proto_gpio_chip;
-
-#define NR_BASEBOARD_GPIOS 16
-
-#endif /* __MACH_X3PROTO_HARDWARE_H */
diff --git a/arch/sh/include/mach-x3proto/mach/ilsel.h b/arch/sh/include/mach-x3proto/mach/ilsel.h
deleted file mode 100644
index 47aeb4b55ea17b..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/ilsel.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ILSEL_H
-#define __ASM_SH_ILSEL_H
-
-typedef enum {
- ILSEL_NONE,
- ILSEL_LAN,
- ILSEL_USBH_I,
- ILSEL_USBH_S,
- ILSEL_USBH_V,
- ILSEL_RTC,
- ILSEL_USBP_I,
- ILSEL_USBP_S,
- ILSEL_USBP_V,
- ILSEL_KEY,
-
- /*
- * ILSEL Aliases - corner cases for interleaved level tables.
- *
- * Someone thought this was a good idea and less hassle than
- * demuxing a shared vector, really.
- */
-
- /* ILSEL0 and 2 */
- ILSEL_FPGA0,
- ILSEL_FPGA1,
- ILSEL_EX1,
- ILSEL_EX2,
- ILSEL_EX3,
- ILSEL_EX4,
-
- /* ILSEL1 and 3 */
- ILSEL_FPGA2 = ILSEL_FPGA0,
- ILSEL_FPGA3 = ILSEL_FPGA1,
- ILSEL_EX5 = ILSEL_EX1,
- ILSEL_EX6 = ILSEL_EX2,
- ILSEL_EX7 = ILSEL_EX3,
- ILSEL_EX8 = ILSEL_EX4,
-} ilsel_source_t;
-
-/* arch/sh/boards/renesas/x3proto/ilsel.c */
-int ilsel_enable(ilsel_source_t set);
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
-void ilsel_disable(unsigned int irq);
-
-#endif /* __ASM_SH_ILSEL_H */
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
deleted file mode 100644
index b8812c74c1dee1..00000000000000
--- a/arch/sh/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-generated-y += unistd_32.h
-generic-y += ucontext.h
diff --git a/arch/sh/include/uapi/asm/auxvec.h b/arch/sh/include/uapi/asm/auxvec.h
deleted file mode 100644
index 8eb47ede7193c1..00000000000000
--- a/arch/sh/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW 18 /* Used FPU control word. */
-
-#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR 33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the
- * value is -1, then the cache doesn't exist. Otherwise:
- *
- * bit 0-3: Cache set-associativity; 0 means fully associative.
- * bit 4-7: Log2 of cacheline size.
- * bit 8-31: Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE 34
-#define AT_L1D_CACHESHAPE 35
-#define AT_L2_CACHESHAPE 36
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/arch/sh/include/uapi/asm/byteorder.h b/arch/sh/include/uapi/asm/byteorder.h
deleted file mode 100644
index e27d6da3212ca1..00000000000000
--- a/arch/sh/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_BYTEORDER_H
-#define __ASM_SH_BYTEORDER_H
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
-
-#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/arch/sh/include/uapi/asm/cachectl.h b/arch/sh/include/uapi/asm/cachectl.h
deleted file mode 100644
index 79c5663251a528..00000000000000
--- a/arch/sh/include/uapi/asm/cachectl.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _SH_CACHECTL_H
-#define _SH_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */
-#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */
-#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */
-
-#define CACHEFLUSH_I 0x4
-
-/*
- * Options for cacheflush system call
- */
-#define ICACHE CACHEFLUSH_I /* flush instruction cache */
-#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */
-#define BCACHE (ICACHE|DCACHE) /* flush both caches */
-
-#endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/include/uapi/asm/cpu-features.h b/arch/sh/include/uapi/asm/cpu-features.h
deleted file mode 100644
index 6de5f65194e634..00000000000000
--- a/arch/sh/include/uapi/asm/cpu-features.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_CPU_FEATURES_H
-#define __ASM_SH_CPU_FEATURES_H
-
-/*
- * Processor flags
- *
- * Note: When adding a new flag, keep cpu_flags[] in
- * arch/sh/kernel/setup.c in sync so symbolic name
- * mapping of the processor flags has a chance of being
- * reasonably accurate.
- *
- * These flags are also available through the ELF
- * auxiliary vector as AT_HWCAP.
- */
-#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */
-#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */
-#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
-#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
-#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
-#define CPU_HAS_PTEA 0x0020 /* PTEA register */
-#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */
-#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */
-#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */
-#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */
-#define CPU_HAS_CAS_L 0x0400 /* cas.l atomic compare-and-swap */
-
-#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h
deleted file mode 100644
index 043dd4b9202630..00000000000000
--- a/arch/sh/include/uapi/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * There isn't anything here anymore, but the file must not be empty or patch
- * will delete it.
- */
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
deleted file mode 100644
index 11866d4f60e167..00000000000000
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_IOCTLS_H
-#define __ASM_SH_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX _IO('f', 1)
-#define FIONCLEX _IO('f', 2)
-#define FIOASYNC _IOW('f', 125, int)
-#define FIONBIO _IOW('f', 126, int)
-#define FIONREAD _IOR('f', 127, int)
-#define TIOCINQ FIONREAD
-#define FIOQSIZE _IOR('f', 128, loff_t)
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-
-#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
-#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
-#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
-#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
-
-#define TCSBRK _IO('t', 29)
-#define TCXONC _IO('t', 30)
-#define TCFLSH _IO('t', 31)
-
-#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
-#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
-#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
-#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
-#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
-
-#define TIOCSPGRP _IOW('t', 118, int)
-#define TIOCGPGRP _IOR('t', 119, int)
-
-#define TIOCEXCL _IO('T', 12) /* 0x540C */
-#define TIOCNXCL _IO('T', 13) /* 0x540D */
-#define TIOCSCTTY _IO('T', 14) /* 0x540E */
-
-#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */
-#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */
-#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */
-#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */
-#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */
-# define TIOCM_LE 0x001
-# define TIOCM_DTR 0x002
-# define TIOCM_RTS 0x004
-# define TIOCM_ST 0x008
-# define TIOCM_SR 0x010
-# define TIOCM_CTS 0x020
-# define TIOCM_CAR 0x040
-# define TIOCM_RNG 0x080
-# define TIOCM_DSR 0x100
-# define TIOCM_CD TIOCM_CAR
-# define TIOCM_RI TIOCM_RNG
-
-#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */
-#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */
-#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */
-#define TIOCCONS _IO('T', 29) /* 0x541D */
-#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */
-#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */
-#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */
-# define TIOCPKT_DATA 0
-# define TIOCPKT_FLUSHREAD 1
-# define TIOCPKT_FLUSHWRITE 2
-# define TIOCPKT_STOP 4
-# define TIOCPKT_START 8
-# define TIOCPKT_NOSTOP 16
-# define TIOCPKT_DOSTOP 32
-# define TIOCPKT_IOCTL 64
-
-
-#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
-#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */
-#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */
-#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */
-#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */
-#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 42, struct termios2)
-#define TCSETS2 _IOW('T', 43, struct termios2)
-#define TCSETSW2 _IOW('T', 44, struct termios2)
-#define TCSETSF2 _IOW('T', 45, struct termios2)
-#define TIOCGRS485 _IOR('T', 46, struct serial_rs485)
-#define TIOCSRS485 _IOWR('T', 47, struct serial_rs485)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-#define TIOCVHANGUP _IO('T', 0x37)
-#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
-#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
-#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
-#define TIOCGISO7816 _IOR('T', 0x42, struct serial_iso7816)
-#define TIOCSISO7816 _IOWR('T', 0x43, struct serial_iso7816)
-
-#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
-#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
-#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
-#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
- /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
-#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
-
-#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#endif /* __ASM_SH_IOCTLS_H */
diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h
deleted file mode 100644
index adc998a64c769f..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/uapi/asm/posix_types_32.h b/arch/sh/include/uapi/asm/posix_types_32.h
deleted file mode 100644
index ea0f51d1ac554b..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types_32.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_POSIX_TYPES_32_H
-#define __ASM_SH_POSIX_TYPES_32_H
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-typedef unsigned short __kernel_uid_t;
-#define __kernel_uid_t __kernel_uid_t
-typedef unsigned short __kernel_gid_t;
-#define __kernel_gid_t __kernel_gid_t
-
-typedef unsigned short __kernel_old_uid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_gid_t __kernel_old_gid_t
-typedef unsigned short __kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* __ASM_SH_POSIX_TYPES_32_H */
diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h
deleted file mode 100644
index 5c88e46b77731a..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef _UAPI__ASM_SH_PTRACE_H
-#define _UAPI__ASM_SH_PTRACE_H
-
-
-#define PTRACE_GETREGS 12 /* General registers */
-#define PTRACE_SETREGS 13
-
-#define PTRACE_GETFPREGS 14 /* FPU registers */
-#define PTRACE_SETFPREGS 15
-
-#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
-
-#define PTRACE_GETDSPREGS 55 /* DSP registers */
-#define PTRACE_SETDSPREGS 56
-
-#define PT_TEXT_END_ADDR 240
-#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
-#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
-#define PT_TEXT_LEN 252
-
-#include <asm/ptrace_32.h>
-
-#endif /* _UAPI__ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/uapi/asm/ptrace_32.h b/arch/sh/include/uapi/asm/ptrace_32.h
deleted file mode 100644
index dc8a26015018af..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace_32.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_SH_PTRACE_32_H
-#define _UAPI__ASM_SH_PTRACE_32_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- * 0 - 15 are integer registers
- * 17 - 22 are control/special registers
- * 24 - 39 fp registers
- * 40 - 47 xd registers
- * 48 - fpscr register
- * -----------------------------
- *
- * We follows above, except:
- * 16 --- program counter (PC)
- * 22 --- syscall #
- * 23 --- floating point communication register
- */
-#define REG_REG0 0
-#define REG_REG15 15
-
-#define REG_PC 16
-
-#define REG_PR 17
-#define REG_SR 18
-#define REG_GBR 19
-#define REG_MACH 20
-#define REG_MACL 21
-
-#define REG_SYSCALL 22
-
-#define REG_FPREG0 23
-#define REG_FPREG15 38
-#define REG_XFREG0 39
-#define REG_XFREG15 54
-
-#define REG_FPSCR 55
-#define REG_FPUL 56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
- unsigned long regs[16];
- unsigned long pc;
- unsigned long pr;
- unsigned long sr;
- unsigned long gbr;
- unsigned long mach;
- unsigned long macl;
- long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
- unsigned long a1;
- unsigned long a0g;
- unsigned long a1g;
- unsigned long m0;
- unsigned long m1;
- unsigned long a0;
- unsigned long x0;
- unsigned long x1;
- unsigned long y0;
- unsigned long y1;
- unsigned long dsr;
- unsigned long rs;
- unsigned long re;
- unsigned long mod;
-};
-
-
-#endif /* _UAPI__ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h
deleted file mode 100644
index a9cc8bad0f36df..00000000000000
--- a/arch/sh/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGCONTEXT_H
-#define __ASM_SH_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/uapi/asm/signal.h b/arch/sh/include/uapi/asm/signal.h
deleted file mode 100644
index 97299daddef5dc..00000000000000
--- a/arch/sh/include/uapi/asm/signal.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGNAL_H
-#define __ASM_SH_SIGNAL_H
-
-#define SA_RESTORER 0x04000000
-
-#include <asm-generic/signal.h>
-
-#ifndef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-#endif
-
-#endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h
deleted file mode 100644
index ef01ced9e16963..00000000000000
--- a/arch/sh/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SOCKIOS_H
-#define __ASM_SH_SOCKIOS_H
-
-#include <linux/time_types.h>
-
-/* Socket-level I/O control calls. */
-#define FIOGETOWN _IOR('f', 123, int)
-#define FIOSETOWN _IOW('f', 124, int)
-
-#define SIOCATMARK _IOR('s', 7, int)
-#define SIOCSPGRP _IOW('s', 8, pid_t)
-#define SIOCGPGRP _IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP_OLD _IOR('s', 100, struct __kernel_old_timeval) /* Get stamp (timeval) */
-#define SIOCGSTAMPNS_OLD _IOR('s', 101, struct __kernel_old_timespec) /* Get stamp (timespec) */
-
-#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h
deleted file mode 100644
index b0ca755ea08d99..00000000000000
--- a/arch/sh/include/uapi/asm/stat.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_STAT_H
-#define __ASM_SH_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned long st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[4];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#define STAT_HAVE_NSEC 1
-
-#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h
deleted file mode 100644
index c727d381a30aff..00000000000000
--- a/arch/sh/include/uapi/asm/swab.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SWAB_H
-#define __ASM_SH_SWAB_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000, 2001 Paolo Alberelli
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm-generic/swab.h>
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
- __asm__(
- "swap.b %1, %0\n\t"
- "swap.w %0, %0\n\t"
- "swap.b %0, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab32 __arch_swab32
-
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
-{
- __asm__(
- "swap.b %1, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab16 __arch_swab16
-
-static inline __u64 __arch_swab64(__u64 val)
-{
- union {
- struct { __u32 a,b; } s;
- __u64 u;
- } v, w;
- v.u = val;
- w.s.b = __arch_swab32(v.s.a);
- w.s.a = __arch_swab32(v.s.b);
- return w.u;
-}
-#define __arch_swab64 __arch_swab64
-
-#endif /* __ASM_SH_SWAB_H */
diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h
deleted file mode 100644
index 0f7c7772a2fbfc..00000000000000
--- a/arch/sh/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/unistd_32.h>
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
deleted file mode 100644
index bbb90f92d05182..00000000000000
--- a/arch/sh/kernel/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.lds
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
deleted file mode 100644
index 69cd9ac4b2ab8a..00000000000000
--- a/arch/sh/kernel/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH kernel.
-#
-
-extra-y := vmlinux.lds
-
-ifdef CONFIG_FUNCTION_TRACER
-# Do not profile debug and lowlevel utilities
-CFLAGS_REMOVE_ftrace.o = -pg
-endif
-
-CFLAGS_REMOVE_return_address.o = -pg
-
-obj-y := head_32.o debugtraps.o dumpstack.o \
- idle.o io.o irq.o irq_32.o kdebugfs.o \
- machvec.o nmi_debug.o process.o \
- process_32.o ptrace.o ptrace_32.o \
- reboot.o return_address.o \
- setup.o signal_32.o sys_sh.o \
- syscalls_32.o time.o topology.o traps.o \
- traps_32.o unwinder.o
-
-ifndef CONFIG_GENERIC_IOMAP
-obj-y += iomap.o
-obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
-endif
-
-obj-y += sys_sh32.o
-obj-y += cpu/
-obj-$(CONFIG_VSYSCALL) += vsyscall/
-obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
-obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
-obj-$(CONFIG_DUMP_CODE) += disassemble.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
-obj-$(CONFIG_DMA_NONCOHERENT) += dma-coherent.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
deleted file mode 100644
index a0322e8328456e..00000000000000
--- a/arch/sh/kernel/asm-offsets.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-
-#include <asm/thread_info.h>
-#include <asm/suspend.h>
-
-int main(void)
-{
- /* offsets into the thread_info struct */
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SIZE, sizeof(struct thread_info));
-
-#ifdef CONFIG_HIBERNATION
- DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
- DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
- DEFINE(PBE_NEXT, offsetof(struct pbe, next));
- DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
-#endif
-
- DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
- DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
- DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
- DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
- DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
- DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
- DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
- DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
- DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
- DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
- DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
- DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
- DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
- DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
- DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
- DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
- DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
- DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
- DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
- DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
- DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
- DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
- return 0;
-}
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
deleted file mode 100644
index 46118236bf0499..00000000000000
--- a/arch/sh/kernel/cpu/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific backends.
-#
-
-obj-$(CONFIG_CPU_SH2) = sh2/
-obj-$(CONFIG_CPU_SH2A) = sh2a/
-obj-$(CONFIG_CPU_SH3) = sh3/
-obj-$(CONFIG_CPU_SH4) = sh4/
-
-# Special cases for family ancestry.
-
-obj-$(CONFIG_CPU_SH4A) += sh4a/
-obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
-
-# Common interfaces.
-
-obj-$(CONFIG_SH_ADC) += adc.o
-obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c
deleted file mode 100644
index 509136715ed53c..00000000000000
--- a/arch/sh/kernel/cpu/adc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/adc.c -- SH3 on-chip ADC support
- *
- * Copyright (C) 2004 Andriy Skulysh <askulysh@image.kiev.ua>
- */
-
-#include <linux/module.h>
-#include <asm/adc.h>
-#include <asm/io.h>
-
-
-int adc_single(unsigned int channel)
-{
- int off;
- unsigned char csr;
-
- if (channel >= 8) return -1;
-
- off = (channel & 0x03) << 2;
-
- csr = __raw_readb(ADCSR);
- csr = channel | ADCSR_ADST | ADCSR_CKS;
- __raw_writeb(csr, ADCSR);
-
- do {
- csr = __raw_readb(ADCSR);
- } while ((csr & ADCSR_ADF) == 0);
-
- csr &= ~(ADCSR_ADF | ADCSR_ADST);
- __raw_writeb(csr, ADCSR);
-
- return (((__raw_readb(ADDRAH + off) << 8) |
- __raw_readb(ADDRAL + off)) >> 6);
-}
-
-EXPORT_SYMBOL(adc_single);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
deleted file mode 100644
index 5b75a384cbf349..00000000000000
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-static struct clk master_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .rate = CONFIG_SH_PCLK_FREQ,
-};
-
-static struct clk peripheral_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk bus_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk cpu_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/*
- * The ordering of these clocks matters, do not change it.
- */
-static struct clk *onchip_clocks[] = {
- &master_clk,
- &peripheral_clk,
- &bus_clk,
- &cpu_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("master_clk", &master_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral_clk),
- CLKDEV_CON_ID("bus_clk", &bus_clk),
- CLKDEV_CON_ID("cpu_clk", &cpu_clk),
-};
-
-int __init __deprecated cpg_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
- struct clk *clk = onchip_clocks[i];
- arch_init_clk_ops(&clk->ops, i);
- if (clk->ops)
- ret |= clk_register(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- clk_add_alias("fck", "sh-tmu-sh3.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.1", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL);
-
- return ret;
-}
-
-/*
- * Placeholder for compatibility, until the lazy CPUs do this
- * on their own.
- */
-int __init __weak arch_clk_init(void)
-{
- return cpg_clk_init();
-}
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
deleted file mode 100644
index 6fb34410d630a5..00000000000000
--- a/arch/sh/kernel/cpu/clock.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/clock.c - SuperH clock framework
- *
- * Copyright (C) 2005 - 2009 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-
-int __init clk_init(void)
-{
- int ret;
-
-#ifndef CONFIG_COMMON_CLK
- ret = arch_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: CPU clock registration failed.\n", __func__);
- return ret;
- }
-#endif
-
- if (sh_mv.mv_clk_init) {
- ret = sh_mv.mv_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: machvec clock initialization failed.\n",
- __func__);
- return ret;
- }
- }
-
-#ifndef CONFIG_COMMON_CLK
- /* Kick the child clocks.. */
- recalculate_root_clocks();
-
- /* Enable the necessary init clocks */
- clk_enable_init_clocks();
-#endif
-
- return ret;
-}
-
-
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
deleted file mode 100644
index fd6db0ab19288f..00000000000000
--- a/arch/sh/kernel/cpu/fpu.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-int init_fpu(struct task_struct *tsk)
-{
- if (tsk_used_math(tsk)) {
- if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
- unlazy_fpu(tsk, task_pt_regs(tsk));
- return 0;
- }
-
- /*
- * Memory allocation at the first usage of the FPU and other state.
- */
- if (!tsk->thread.xstate) {
- tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!tsk->thread.xstate)
- return -ENOMEM;
- }
-
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- } else {
- struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- }
-
- set_stopped_child_used_math(tsk);
- return 0;
-}
-
-#ifdef CONFIG_SH_FPU
-void __fpu_state_restore(void)
-{
- struct task_struct *tsk = current;
-
- restore_fpu(tsk);
-
- task_thread_info(tsk)->status |= TS_USEDFPU;
- tsk->thread.fpu_counter++;
-}
-
-void fpu_state_restore(struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (unlikely(!user_mode(regs))) {
- printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
- BUG();
- return;
- }
-
- if (!tsk_used_math(tsk)) {
- int ret;
- /*
- * does a slab alloc which can sleep
- */
- local_irq_enable();
- ret = init_fpu(tsk);
- local_irq_disable();
- if (ret) {
- /*
- * ran out of memory!
- */
- force_sig(SIGKILL);
- return;
- }
- }
-
- grab_fpu(regs);
-
- __fpu_state_restore();
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
- TRAP_HANDLER_DECL;
-
- fpu_state_restore(regs);
-}
-#endif /* CONFIG_SH_FPU */
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
deleted file mode 100644
index 1d008745877ff8..00000000000000
--- a/arch/sh/kernel/cpu/init.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/init.c
- *
- * CPU init code
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/log2.h>
-#include <asm/mmu_context.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/cache.h>
-#include <asm/elf.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/sh_bios.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_SH_FPU
-#define cpu_has_fpu 1
-#else
-#define cpu_has_fpu 0
-#endif
-
-#ifdef CONFIG_SH_DSP
-#define cpu_has_dsp 1
-#else
-#define cpu_has_dsp 0
-#endif
-
-/*
- * Generic wrapper for command line arguments to disable on-chip
- * peripherals (nofpu, nodsp, and so forth).
- */
-#define onchip_setup(x) \
-static int x##_disabled = !cpu_has_##x; \
- \
-static int x##_setup(char *opts) \
-{ \
- x##_disabled = 1; \
- return 1; \
-} \
-__setup("no" __stringify(x), x##_setup);
-
-onchip_setup(fpu);
-onchip_setup(dsp);
-
-#ifdef CONFIG_SPECULATIVE_EXECUTION
-#define CPUOPM 0xff2f0000
-#define CPUOPM_RABD (1 << 5)
-
-static void speculative_execution_init(void)
-{
- /* Clear RABD */
- __raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
-
- /* Flush the update */
- (void)__raw_readl(CPUOPM);
- ctrl_barrier();
-}
-#else
-#define speculative_execution_init() do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH4A
-#define EXPMASK 0xff2f0004
-#define EXPMASK_RTEDS (1 << 0)
-#define EXPMASK_BRDSSLP (1 << 1)
-#define EXPMASK_MMCAW (1 << 4)
-
-static void expmask_init(void)
-{
- unsigned long expmask = __raw_readl(EXPMASK);
-
- /*
- * Future proofing.
- *
- * Disable support for slottable sleep instruction, non-nop
- * instructions in the rte delay slot, and associative writes to
- * the memory-mapped cache array.
- */
- expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
-
- __raw_writel(expmask, EXPMASK);
- ctrl_barrier();
-}
-#else
-#define expmask_init() do { } while (0)
-#endif
-
-/* 2nd-level cache init */
-void __attribute__ ((weak)) l2_cache_init(void)
-{
-}
-
-/*
- * Generic first-level cache init
- */
-#if !defined(CONFIG_CPU_J2)
-static void cache_init(void)
-{
- unsigned long ccr, flags;
-
- jump_to_uncached();
- ccr = __raw_readl(SH_CCR);
-
- /*
- * At this point we don't know whether the cache is enabled or not - a
- * bootloader may have enabled it. There are at least 2 things that
- * could be dirty in the cache at this point:
- * 1. kernel command line set up by boot loader
- * 2. spilled registers from the prolog of this function
- * => before re-initialising the cache, we must do a purge of the whole
- * cache out to memory for safety. As long as nothing is spilled
- * during the loop to lines that have already been done, this is safe.
- * - RPC
- */
- if (ccr & CCR_CACHE_ENABLE) {
- unsigned long ways, waysize, addrstart;
-
- waysize = current_cpu_data.dcache.sets;
-
-#ifdef CCR_CACHE_ORA
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to flush..
- */
- if (ccr & CCR_CACHE_ORA)
- waysize >>= 1;
-#endif
-
- waysize <<= current_cpu_data.dcache.entry_shift;
-
-#ifdef CCR_CACHE_EMODE
- /* If EMODE is not set, we only have 1 way to flush. */
- if (!(ccr & CCR_CACHE_EMODE))
- ways = 1;
- else
-#endif
- ways = current_cpu_data.dcache.ways;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz)
- __raw_writel(0, addr);
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
- }
-
- /*
- * Default CCR values .. enable the caches
- * and invalidate them immediately..
- */
- flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE;
-
-#ifdef CCR_CACHE_EMODE
- /* Force EMODE if possible */
- if (current_cpu_data.dcache.ways > 1)
- flags |= CCR_CACHE_EMODE;
- else
- flags &= ~CCR_CACHE_EMODE;
-#endif
-
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- /* Write-through */
- flags |= CCR_CACHE_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- /* Write-back */
- flags |= CCR_CACHE_CB;
-#else
- /* Off */
- flags &= ~CCR_CACHE_ENABLE;
-#endif
-
- l2_cache_init();
-
- __raw_writel(flags, SH_CCR);
- back_to_cached();
-}
-#else
-#define cache_init() do { } while (0)
-#endif
-
-#define CSHAPE(totalsize, linesize, assoc) \
- ((totalsize & ~0xff) | (linesize << 4) | assoc)
-
-#define CACHE_DESC_SHAPE(desc) \
- CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways)
-
-static void detect_cache_shape(void)
-{
- l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache);
-
- if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED)
- l1i_cache_shape = l1d_cache_shape;
- else
- l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache);
-
- if (current_cpu_data.flags & CPU_HAS_L2_CACHE)
- l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache);
- else
- l2_cache_shape = -1; /* No S-cache */
-}
-
-static void fpu_init(void)
-{
- /* Disable the FPU */
- if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
- printk("FPU Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_FPU;
- }
-
- disable_fpu();
- clear_used_math();
-}
-
-#ifdef CONFIG_SH_DSP
-static void release_dsp(void)
-{
- unsigned long sr;
-
- /* Clear SR.DSP bit */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "and\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- : "=&r" (sr)
- : "r" (~SR_DSP)
- );
-}
-
-static void dsp_init(void)
-{
- unsigned long sr;
-
- /*
- * Set the SR.DSP bit, wait for one instruction, and then read
- * back the SR value.
- */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "or\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- "nop\n\t"
- "stc\tsr, %0\n\t"
- : "=&r" (sr)
- : "r" (SR_DSP)
- );
-
- /* If the DSP bit is still set, this CPU has a DSP */
- if (sr & SR_DSP)
- current_cpu_data.flags |= CPU_HAS_DSP;
-
- /* Disable the DSP */
- if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
- printk("DSP Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_DSP;
- }
-
- /* Now that we've determined the DSP status, clear the DSP bit. */
- release_dsp();
-}
-#else
-static inline void dsp_init(void) { }
-#endif /* CONFIG_SH_DSP */
-
-/**
- * cpu_init
- *
- * This is our initial entry point for each CPU, and is invoked on the
- * boot CPU prior to calling start_kernel(). For SMP, a combination of
- * this and start_secondary() will bring up each processor to a ready
- * state prior to hand forking the idle loop.
- *
- * We do all of the basic processor init here, including setting up
- * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
- * subsequently platform_setup()) things like determining the CPU
- * subtype and initial configuration will all be done.
- *
- * Each processor family is still responsible for doing its own probing
- * and cache configuration in cpu_probe().
- */
-asmlinkage void cpu_init(void)
-{
- current_thread_info()->cpu = hard_smp_processor_id();
-
- /* First, probe the CPU */
- cpu_probe();
-
- if (current_cpu_data.type == CPU_SH_NONE)
- panic("Unknown CPU");
-
- /* First setup the rest of the I-cache info */
- current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
- current_cpu_data.icache.linesz;
-
- current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
- current_cpu_data.icache.linesz;
-
- /* And the D-cache too */
- current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
- current_cpu_data.dcache.linesz;
-
- current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
- current_cpu_data.dcache.linesz;
-
- /* Init the cache */
- cache_init();
-
- if (raw_smp_processor_id() == 0) {
-#ifdef CONFIG_MMU
- shm_align_mask = max_t(unsigned long,
- current_cpu_data.dcache.way_size - 1,
- PAGE_SIZE - 1);
-#else
- shm_align_mask = PAGE_SIZE - 1;
-#endif
-
- /* Boot CPU sets the cache shape */
- detect_cache_shape();
- }
-
- fpu_init();
- dsp_init();
-
- /*
- * Initialize the per-CPU ASID cache very early, since the
- * TLB flushing routines depend on this being setup.
- */
- current_cpu_data.asid_cache = NO_CONTEXT;
-
- current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32;
-
- speculative_execution_init();
- expmask_init();
-
- /* Do the rest of the boot processor setup */
- if (raw_smp_processor_id() == 0) {
- /* Save off the BIOS VBR, if there is one */
- sh_bios_vbr_init();
-
- /*
- * Setup VBR for boot CPU. Secondary CPUs do this through
- * start_secondary().
- */
- per_cpu_trap_init();
-
- /*
- * Boot processor to setup the FP and extended state
- * context info.
- */
- init_thread_xstate();
- }
-}
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
deleted file mode 100644
index e4578cde46ba26..00000000000000
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
-#
-obj-y += imask.o
-obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
deleted file mode 100644
index 572585c3f2fd8c..00000000000000
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/imask.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- *
- * Simple interrupt handling using IMASK of SR register.
- *
- */
-/* NOTE: Will not work on level 15 */
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <linux/bitmap.h>
-#include <asm/irq.h>
-
-/* Bitmap of IRQ masked */
-#define IMASK_PRIORITY 15
-
-static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
-static int interrupt_priority;
-
-static inline void set_interrupt_registers(int ip)
-{
- unsigned long __dummy;
-
- asm volatile(
-#ifdef CONFIG_CPU_HAS_SR_RB
- "ldc %2, r6_bank\n\t"
-#endif
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- "shlr2 %0\n\t"
- "cmp/eq #0x3c, %0\n\t"
- "bt/s 1f ! CLI-ed\n\t"
- " stc sr, %0\n\t"
- "and %1, %0\n\t"
- "or %2, %0\n\t"
- "ldc %0, sr\n"
- "1:"
- : "=&z" (__dummy)
- : "r" (~0xf0), "r" (ip << 4)
- : "t");
-}
-
-static void mask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- clear_bit(irq, imask_mask);
- if (interrupt_priority < IMASK_PRIORITY - irq)
- interrupt_priority = IMASK_PRIORITY - irq;
- set_interrupt_registers(interrupt_priority);
-}
-
-static void unmask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- set_bit(irq, imask_mask);
- interrupt_priority = IMASK_PRIORITY -
- find_first_zero_bit(imask_mask, IMASK_PRIORITY);
- set_interrupt_registers(interrupt_priority);
-}
-
-static struct irq_chip imask_irq_chip = {
- .name = "SR.IMASK",
- .irq_mask = mask_imask_irq,
- .irq_unmask = unmask_imask_irq,
- .irq_mask_ack = mask_imask_irq,
-};
-
-void make_imask_irq(unsigned int irq)
-{
- irq_set_chip_and_handler_name(irq, &imask_irq_chip, handle_level_irq,
- "level");
-}
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
deleted file mode 100644
index d41bce71f211fd..00000000000000
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Interrupt handling for IPR-based IRQ.
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2006 Paul Mundt
- *
- * Supported system:
- * On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729.
- * Hitachi SolutionEngine external I/O:
- * MS7709SE01, MS7709ASE01, and MS7750SE01
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-
-static inline struct ipr_desc *get_ipr_desc(struct irq_data *data)
-{
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- return container_of(chip, struct ipr_desc, chip);
-}
-
-static void disable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set the priority in IPR to 0 */
- __raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
- (void)__raw_readw(addr); /* Read back to flush write posting */
-}
-
-static void enable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set priority in IPR back to original value */
- __raw_writew(__raw_readw(addr) | (p->priority << p->shift), addr);
-}
-
-/*
- * The shift value is now the number of bits to shift, not the number of
- * bits/4. This is to make it easier to read the value directly from the
- * datasheets. The IPR address is calculated using the ipr_offset table.
- */
-void register_ipr_controller(struct ipr_desc *desc)
-{
- int i;
-
- desc->chip.irq_mask = disable_ipr_irq;
- desc->chip.irq_unmask = enable_ipr_irq;
-
- for (i = 0; i < desc->nr_irqs; i++) {
- struct ipr_data *p = desc->ipr_data + i;
- int res;
-
- BUG_ON(p->ipr_idx >= desc->nr_offsets);
- BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
-
- res = irq_alloc_desc_at(p->irq, numa_node_id());
- if (unlikely(res != p->irq && res != -EEXIST)) {
- printk(KERN_INFO "can not get irq_desc for %d\n",
- p->irq);
- continue;
- }
-
- disable_irq_nosync(p->irq);
- irq_set_chip_and_handler_name(p->irq, &desc->chip,
- handle_level_irq, "level");
- irq_set_chip_data(p->irq, p);
- disable_ipr_irq(irq_get_irq_data(p->irq));
- }
-}
-EXPORT_SYMBOL(register_ipr_controller);
diff --git a/arch/sh/kernel/cpu/pfc.c b/arch/sh/kernel/cpu/pfc.c
deleted file mode 100644
index 062056ede88de4..00000000000000
--- a/arch/sh/kernel/cpu/pfc.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <cpu/pfc.h>
-
-static struct platform_device sh_pfc_device = {
- .id = -1,
-};
-
-int __init sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources)
-{
- sh_pfc_device.name = name;
- sh_pfc_device.num_resources = num_resources;
- sh_pfc_device.resource = resource;
-
- return platform_device_register(&sh_pfc_device);
-}
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
deleted file mode 100644
index a306bcd6b34130..00000000000000
--- a/arch/sh/kernel/cpu/proc.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/machvec.h>
-#include <asm/processor.h>
-
-static const char *cpu_name[] = {
- [CPU_SH7201] = "SH7201",
- [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
- [CPU_SH7264] = "SH7264", [CPU_SH7269] = "SH7269",
- [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
- [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
- [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
- [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
- [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729",
- [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S",
- [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751",
- [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760",
- [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
- [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
- [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
- [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
- [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
- [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
- [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
- [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
- [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
- [CPU_J2] = "J2",
- [CPU_SH_NONE] = "Unknown"
-};
-
-const char *get_cpu_subtype(struct sh_cpuinfo *c)
-{
- return cpu_name[c->type];
-}
-EXPORT_SYMBOL(get_cpu_subtype);
-
-#ifdef CONFIG_PROC_FS
-/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
-static const char *cpu_flags[] = {
- "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
- "ptea", "llsc", "l2", "op32", "pteaex", NULL
-};
-
-static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
-{
- unsigned long i;
-
- seq_printf(m, "cpu flags\t:");
-
- if (!c->flags) {
- seq_printf(m, " %s\n", cpu_flags[0]);
- return;
- }
-
- for (i = 0; cpu_flags[i]; i++)
- if ((c->flags & (1 << i)))
- seq_printf(m, " %s", cpu_flags[i+1]);
-
- seq_printf(m, "\n");
-}
-
-static void show_cacheinfo(struct seq_file *m, const char *type,
- struct cache_info info)
-{
- unsigned int cache_size;
-
- cache_size = info.ways * info.sets * info.linesz;
-
- seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
- type, cache_size >> 10, info.ways);
-}
-
-/*
- * Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- struct sh_cpuinfo *c = v;
- unsigned int cpu = c - cpu_data;
-
- if (!cpu_online(cpu))
- return 0;
-
- if (cpu == 0)
- seq_printf(m, "machine\t\t: %s\n", get_system_type());
- else
- seq_printf(m, "\n");
-
- seq_printf(m, "processor\t: %d\n", cpu);
- seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
- seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
- if (c->cut_major == -1)
- seq_printf(m, "cut\t\t: unknown\n");
- else if (c->cut_minor == -1)
- seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
- else
- seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
-
- show_cpuflags(m, c);
-
- seq_printf(m, "cache type\t: ");
-
- /*
- * Check for what type of cache we have, we support both the
- * unified cache on the SH-2 and SH-3, as well as the harvard
- * style cache on the SH-4.
- */
- if (c->icache.flags & SH_CACHE_COMBINED) {
- seq_printf(m, "unified\n");
- show_cacheinfo(m, "cache", c->icache);
- } else {
- seq_printf(m, "split (harvard)\n");
- show_cacheinfo(m, "icache", c->icache);
- show_cacheinfo(m, "dcache", c->dcache);
- }
-
- /* Optional secondary cache */
- if (c->flags & CPU_HAS_L2_CACHE)
- show_cacheinfo(m, "scache", c->scache);
-
- seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
-
- seq_printf(m, "bogomips\t: %lu.%02lu\n",
- c->loops_per_jiffy/(500000/HZ),
- (c->loops_per_jiffy/(5000/HZ)) % 100);
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile
deleted file mode 100644
index 214c3a5b184ace..00000000000000
--- a/arch/sh/kernel/cpu/sh2/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2 backends.
-#
-
-obj-y := ex.o probe.o entry.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
-
-# SMP setup
-smp-$(CONFIG_CPU_J2) := smp-j2.o
-obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
deleted file mode 100644
index d66d194c7731b9..00000000000000
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/clock-sh7619.c
- *
- * SH7619 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/processor.h>
-
-static const int pll1rate[] = {1,2};
-static const int pfc_divisors[] = {1,2,0,4};
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7619_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7619_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7619_clk_ops[] = {
- &sh7619_master_clk_ops,
- &sh7619_module_clk_ops,
- &sh7619_bus_clk_ops,
- &sh7619_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
- test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- BUG_ON(!pll2_mult);
-
- if (idx < ARRAY_SIZE(sh7619_clk_ops))
- *ops = sh7619_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
deleted file mode 100644
index 0a1c2bf216bc03..00000000000000
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ /dev/null
@@ -1,373 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/entry.S
- *
- * The SH-2 exception entry
- *
- * Copyright (C) 2005-2008 Yoshinori Sato
- * Copyright (C) 2005 AXE,Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- mov.l r3,@-sp
- cli
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov.l @r2,r0
- mov.l @(5*4,r15),r3 ! previous SR
- or r0,r3 ! set MD
- tst r0,r0
- bf/s 1f ! previous mode check
- mov.l r3,@(5*4,r15) ! update SR
- ! switch to kernel mode
- mov.l __md_bit,r0
- mov.l r0,@r2 ! enter kernel mode
- mov.l $current_thread_info,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r0
- mov.l @r0,r0
- mov.l @r0,r0
- shll2 r0
- add r0,r2
-#endif
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(5*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r3
- add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame
- mov.l r3,@-r15 ! original SP
- mov.l r14,@-r15
- mov.l r13,@-r15
- mov.l r12,@-r15
- mov.l r11,@-r15
- mov.l r10,@-r15
- mov.l r9,@-r15
- mov.l r8,@-r15
- mov.l r7,@-r15
- mov.l r6,@-r15
- mov.l r5,@-r15
- mov.l r4,@-r15
- mov r1,r9 ! save TRA
- mov r2,r8 ! copy user -> kernel stack
- mov.l @(0,r8),r3
- mov.l r3,@-r15
- mov.l @(4,r8),r2
- mov.l r2,@-r15
- mov.l @(12,r8),r1
- mov.l r1,@-r15
- mov.l @(8,r8),r0
- bra 2f
- mov.l r0,@-r15
-1:
- ! in kernel exception
- mov #(22-4-4-1)*4+4,r0
- mov r15,r2
- sub r0,r15
- mov.l @r2+,r0 ! old R3
- mov.l r0,@-r15
- mov.l @r2+,r0 ! old R2
- mov.l r0,@-r15
- mov.l @(4,r2),r0 ! old R1
- mov.l r0,@-r15
- mov.l @r2,r0 ! old R0
- mov.l r0,@-r15
- add #8,r2
- mov.l @r2+,r3 ! old PC
- mov.l @r2+,r0 ! old SR
- add #-4,r2 ! exception frame stub (sr)
- mov.l r1,@-r2 ! TRA
- sts.l macl, @-r2
- sts.l mach, @-r2
- stc.l gbr, @-r2
- mov.l r0,@-r2 ! save old SR
- sts.l pr,@-r2
- mov.l r3,@-r2 ! save old PC
- mov r2,r0
- add #8*4,r0
- mov.l r0,@-r2 ! save old SP
- mov.l r14,@-r2
- mov.l r13,@-r2
- mov.l r12,@-r2
- mov.l r11,@-r2
- mov.l r10,@-r2
- mov.l r9,@-r2
- mov.l r8,@-r2
- mov.l r7,@-r2
- mov.l r6,@-r2
- mov.l r5,@-r2
- mov.l r4,@-r2
- mov r1,r9
- mov.l @(OFF_R0,r15),r0
- mov.l @(OFF_R1,r15),r1
- mov.l @(OFF_R2,r15),r2
- mov.l @(OFF_R3,r15),r3
-2:
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-#ifdef CONFIG_CPU_J2
- mov #16,r8
- cmp/hs r8,r9
- bt interrupt_entry ! 31 > vec >= 16 is interrupt
-#endif
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 6f,r9
- mov.l 7f,r8
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov #OFF_SR,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov #OFF_SP,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov #OFF_PC,r0
- mov.l @(r0,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov #OFF_SR,r3
- mov.l @(r0,r3),r1
- mov.l __md_bit,r3
- and r1,r3 ! copy MD bit
- mov.l r3,@r2
- shll2 r1 ! clear MD bit
- shlr2 r1
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov #OFF_PC,r3
- mov.l @(r0,r3),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r1
-#endif
- mov.l r0,@r1
- mov.l @r15+,r0
- mov.l @r15+,r1
- mov.l @r15+,r2
- mov.l @r15+,r3
- mov.l @r15+,r4
- mov.l @r15+,r5
- mov.l @r15+,r6
- mov.l @r15+,r7
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- mov.l @r15+,r11
- mov.l @r15+,r12
- mov.l @r15+,r13
- mov.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-__md_bit:
- .long 0x40000000
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-#ifdef CONFIG_SMP
-$cpuid:
- .long sh2_cpuid_addr
-#endif
-
-! common exception handler
-#include "../../entry-common.S"
-
-#ifdef CONFIG_NR_CPUS
-#define NR_CPUS CONFIG_NR_CPUS
-#else
-#define NR_CPUS 1
-#endif
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .rept NR_CPUS
- .long 0x40000000
- .endr
-
-#ifdef CONFIG_SMP
-.global sh2_cpuid_addr
-sh2_cpuid_addr:
- .long dummy_cpuid
-dummy_cpuid:
- .long 0
-#endif
-
- .section .bss
-__current_thread_info:
- .rept NR_CPUS
- .long 0
- .endr
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
deleted file mode 100644
index dd0cc887a3ca2c..00000000000000
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/ex.S
- *
- * The SH-2 exception vector table
- *
- * Copyright (C) 2005 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-exception_entry:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline:
- mov.l r0,@-sp
- mov.l $exception_handler,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-$exception_entry:
- .long exception_entry
-$exception_handler:
- .long exception_handler
-!
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
deleted file mode 100644
index d342ea08843f6a..00000000000000
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/probe.c
- *
- * CPU Subtype Probing for SH-2.
- *
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/of_fdt.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_CPU_J2)
-extern u32 __iomem *j2_ccr_base;
-static int __init scan_cache(unsigned long node, const char *uname,
- int depth, void *data)
-{
- if (!of_flat_dt_is_compatible(node, "jcore,cache"))
- return 0;
-
- j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
-
- return 1;
-}
-#endif
-
-void __ref cpu_probe(void)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
- boot_cpu_data.type = CPU_SH7619;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1<<12);
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-#endif
-
-#if defined(CONFIG_CPU_J2)
-#if defined(CONFIG_SMP)
- unsigned cpu = hard_smp_processor_id();
-#else
- unsigned cpu = 0;
-#endif
- if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
- if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
- if (cpu != 0) return;
- boot_cpu_data.type = CPU_J2;
-
- /* These defaults are appropriate for the original/current
- * J2 cache. Once there is a proper framework for getting cache
- * info from device tree, we should switch to that. */
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.linesz = 32;
- boot_cpu_data.dcache.flags = 0;
-
- boot_cpu_data.flags |= CPU_HAS_CAS_L;
-#else
- /*
- * SH-2 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
-#endif
- boot_cpu_data.icache = boot_cpu_data.dcache;
- boot_cpu_data.family = CPU_FAMILY_SH2;
-}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
deleted file mode 100644
index b1c877b6a4207f..00000000000000
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7619 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, EDMAC, CMT0, CMT1,
- SCIF0, SCIF1, SCIF2,
- HIF_HIFI, HIF_HIFBI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- SIOF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
- INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
- INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
- INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
- INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
- INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
- INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
- INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
- INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
- INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
- INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
- INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
- INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
- INTC_IRQ(SIOF, 108),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
- { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
- { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
- { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xf8400000, 0x100),
- DEFINE_RES_IRQ(88),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xf8410000, 0x100),
- DEFINE_RES_IRQ(92),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xf8420000, 0x100),
- DEFINE_RES_IRQ(96),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_eth_plat_data eth_platform_data = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = 0xfb000000,
- .end = 0xfb0001c7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device eth_device = {
- .name = "sh7619-ether",
- .id = -1,
- .dev = {
- .platform_data = ð_platform_data,
- },
- .num_resources = ARRAY_SIZE(eth_resources),
- .resource = eth_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xf84a0070, 0x10),
- DEFINE_RES_IRQ(86),
- DEFINE_RES_IRQ(87),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct platform_device *sh7619_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- ð_device,
- &cmt_device,
-};
-
-static int __init sh7619_devices_setup(void)
-{
- return platform_add_devices(sh7619_devices,
- ARRAY_SIZE(sh7619_devices));
-}
-arch_initcall(sh7619_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7619_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
-};
-
-#define STBCR3 0xf80a0000
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
-
- sh_early_platform_add_devices(sh7619_early_devices,
- ARRAY_SIZE(sh7619_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2/smp-j2.c b/arch/sh/kernel/cpu/sh2/smp-j2.c
deleted file mode 100644
index d0d5d81455ae1e..00000000000000
--- a/arch/sh/kernel/cpu/sh2/smp-j2.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SMP support for J2 processor
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/cmpxchg.h>
-
-DEFINE_PER_CPU(unsigned, j2_ipi_messages);
-
-extern u32 *sh2_cpuid_addr;
-static u32 *j2_ipi_trigger;
-static int j2_ipi_irq;
-
-static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned cpu = hard_smp_processor_id();
- volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu);
- unsigned messages, i;
-
- do messages = *pmsg;
- while (cmpxchg(pmsg, messages, 0) != messages);
-
- if (!messages) return IRQ_NONE;
-
- for (i=0; i<SMP_MSG_NR; i++)
- if (messages & (1U<<i))
- smp_message_recv(i);
-
- return IRQ_HANDLED;
-}
-
-static void j2_smp_setup(void)
-{
-}
-
-static void j2_prepare_cpus(unsigned int max_cpus)
-{
- struct device_node *np;
- unsigned i, max = 1;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller");
- if (!np)
- goto out;
-
- j2_ipi_irq = irq_of_parse_and_map(np, 0);
- j2_ipi_trigger = of_iomap(np, 0);
- if (!j2_ipi_irq || !j2_ipi_trigger)
- goto out;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio");
- if (!np)
- goto out;
-
- sh2_cpuid_addr = of_iomap(np, 0);
- if (!sh2_cpuid_addr)
- goto out;
-
- if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU,
- "ipi", (void *)j2_ipi_interrupt_handler) != 0)
- goto out;
-
- max = max_cpus;
-out:
- /* Disable any cpus past max_cpus, or all secondaries if we didn't
- * get the necessary resources to support SMP. */
- for (i=max; i<NR_CPUS; i++) {
- set_cpu_possible(i, false);
- set_cpu_present(i, false);
- }
-}
-
-static void j2_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- struct device_node *np;
- u32 regs[2];
- void __iomem *release, *initpc;
-
- if (!cpu) return;
-
- np = of_get_cpu_node(cpu, NULL);
- if (!np) return;
-
- if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return;
- release = ioremap(regs[0], sizeof(u32));
- initpc = ioremap(regs[1], sizeof(u32));
-
- __raw_writel(entry_point, initpc);
- __raw_writel(1, release);
-
- iounmap(initpc);
- iounmap(release);
-
- pr_info("J2 SMP: requested start of cpu %u\n", cpu);
-}
-
-static unsigned int j2_smp_processor_id(void)
-{
- return __raw_readl(sh2_cpuid_addr);
-}
-
-static void j2_send_ipi(unsigned int cpu, unsigned int message)
-{
- volatile unsigned *pmsg;
- unsigned old;
- unsigned long val;
-
- /* There is only one IPI interrupt shared by all messages, so
- * we keep a separate interrupt flag per message type in sw. */
- pmsg = &per_cpu(j2_ipi_messages, cpu);
- do old = *pmsg;
- while (cmpxchg(pmsg, old, old|(1U<<message)) != old);
-
- /* Generate the actual interrupt by writing to CCRn bit 28. */
- val = __raw_readl(j2_ipi_trigger + cpu);
- __raw_writel(val | (1U<<28), j2_ipi_trigger + cpu);
-}
-
-static struct plat_smp_ops j2_smp_ops = {
- .smp_setup = j2_smp_setup,
- .prepare_cpus = j2_prepare_cpus,
- .start_cpu = j2_start_cpu,
- .smp_processor_id = j2_smp_processor_id,
- .send_ipi = j2_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops);
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
deleted file mode 100644
index 2a7515b658fd38..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2A backends.
-#
-
-obj-y := common.o probe.o opcode_helper.o
-
-common-y += ex.o entry.o
-
-obj-$(CONFIG_SH_FPU) += fpu.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7201) += setup-sh7201.o clock-sh7201.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7264) += setup-sh7264.o clock-sh7264.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7269) += setup-sh7269.o clock-sh7269.o
-obj-$(CONFIG_CPU_SUBTYPE_MXG) += setup-mxg.o clock-sh7206.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) := pinmux-sh7203.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o
-
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
deleted file mode 100644
index 5a5daaafb27a49..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7201.c
- *
- * SH7201 support for the clock framework
- *
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate = 10000000 * pll2_mult *
- pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7201_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7201_clk_ops[] = {
- &sh7201_master_clk_ops,
- &sh7201_module_clk_ops,
- &sh7201_bus_clk_ops,
- &sh7201_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 2;
- else
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7201_clk_ops))
- *ops = sh7201_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
deleted file mode 100644
index c6205394566441..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7203.c
- *
- * SH7203 support for the clock framework
- *
- * Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd)
- *
- * Based on clock-sh7263.c
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={8,12,16,0};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
-}
-
-static struct sh_clk_ops sh7203_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7203_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx-2];
-}
-
-static struct sh_clk_ops sh7203_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7203_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7203_clk_ops[] = {
- &sh7203_master_clk_ops,
- &sh7203_module_clk_ops,
- &sh7203_bus_clk_ops,
- &sh7203_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
- else if (test_mode_pin(MODE_PIN0))
- pll2_mult = 2;
- else
- pll2_mult = 1;
-
- if (idx < ARRAY_SIZE(sh7203_clk_ops))
- *ops = sh7203_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
deleted file mode 100644
index d286d7b918d5e3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7206.c
- *
- * SH7206 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7206_clk_ops[] = {
- &sh7206_master_clk_ops,
- &sh7206_module_clk_ops,
- &sh7206_bus_clk_ops,
- &sh7206_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7206_clk_ops))
- *ops = sh7206_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
deleted file mode 100644
index d9acc1ed79817c..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7264.c
- *
- * SH7264 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7264 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-#define STBCR8 0xfffe041c
-
-static const unsigned int pll1rate[] = {8, 12};
-
-static unsigned int pll1_div;
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 18000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long rate = clk->parent->rate / pll1_div;
- return rate * pll1rate[(__raw_readw(FRQCR) >> 8) & 1];
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
-};
-
-static int div2[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_P,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 4, 0x7, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x78, CLK_ENABLE_REG_16BIT),
-};
-
-enum { MSTP77, MSTP74, MSTP72,
- MSTP60,
- MSTP35, MSTP34, MSTP33, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP77] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 7, 0), /* SCIF */
- [MSTP74] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 4, 0), /* VDC */
- [MSTP72] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR6, 0, 0), /* USB */
- [MSTP35] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 6, 0), /* MTU2 */
- [MSTP34] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 4, 0), /* SDHI0 */
- [MSTP33] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 3, 0), /* SDHI1 */
- [MSTP32] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP77]),
- CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP34]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP33]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- if (test_mode_pin(MODE_PIN0)) {
- if (test_mode_pin(MODE_PIN1))
- pll1_div = 3;
- else
- pll1_div = 4;
- } else
- pll1_div = 1;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
deleted file mode 100644
index c17ab0d7653888..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
- *
- * SH7269 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7269 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-
-#define PLL_RATE 20
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 13340000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
- return clk->parent->rate / 8;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
- .recalc = peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
- .ops = &peripheral0_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
- return clk->parent->rate / 4;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
- .recalc = peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
- .ops = &peripheral1_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
- &peripheral0_clk,
- &peripheral1_clk,
-};
-
-static int div2[] = { 1, 2, 0, 4 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_B,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
-};
-
-enum { MSTP72,
- MSTP60,
- MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP35, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
- [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
- [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
- [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
- [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
- [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
- [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
- [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
- [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
- [MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
- [MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP47]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP46]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP45]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP44]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP43]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP42]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP41]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
deleted file mode 100644
index 9f11fc8b505251..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ /dev/null
@@ -1,247 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/entry.S
- *
- * The SH-2A exception entry
- *
- * Copyright (C) 2008 Yoshinori Sato
- * Based on arch/sh/kernel/cpu/sh2/entry.S
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- cli
- mov.l $cpu_mode,r2
- bld.b #6,@(0,r2) !previus SR.MD
- bst.b #6,@(4*4,r15) !set cpu mode to SR.MD
- bt 1f
- ! switch to kernel mode
- bset.b #6,@(0,r2) !set SR.MD
- mov.l $current_thread_info,r2
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0 ! r0 = kernel stack tail
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(3*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r0
- add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame
- lds r0,pr ! pr = original SP
- movmu.l r3,@-r15 ! save regs
- mov r2,r8 ! r8 = previus stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore previous stack
- mov.l @r8+,r2
- mov.l @r8+,r0
- mov.l @r8+,r1
- bra 2f
- movml.l r2,@-r15
-1:
- ! in kernel exception
- mov r15,r2
- add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
- movmu.l r3,@-r15
- mov r2,r8 ! r8 = previous stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore exception frame & regs
- mov.l @r8+,r2 ! old R2
- mov.l @r8+,r0 ! old R0
- mov.l @r8+,r1 ! old R1
- mov.l @r8+,r10 ! old PC
- mov.l @r8+,r11 ! old SR
- movml.l r2,@-r15
- mov.l r10,@(OFF_PC,r15)
- mov.l r11,@(OFF_SR,r15)
- mov.l r8,@(OFF_SP,r15) ! save old sp
- mov r15,r8
- add #OFF_TRA + 4,r8
- mov.l r9,@-r8
- sts.l macl,@-r8
- sts.l mach,@-r8
- stc.l gbr,@-r8
- add #-4,r8
- sts.l pr,@-r8
-2:
- ! dispatch exception / interrupt
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 7f,r8
- mov.l 6f,r9
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov.l @(OFF_SR,r2),r3
- mov.l r3,@-r1
- mov.l @(OFF_SP,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- movml.l @r15+,r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov.l @(OFF_PC,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
- bld.b #6,@(OFF_SR,r15)
- bst.b #6,@(0,r2) ! save CPU mode
- mov.l @(OFF_SR,r0),r1
- shll2 r1
- shlr2 r1 ! clear MD bit
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov.l @(OFF_PC,r0),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
- mov.l r0,@r1
- movml.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-
-! common exception handler
-#include "../../entry-common.S"
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .long 0x40000000
-
- .section .bss
-__current_thread_info:
- .long 0
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
deleted file mode 100644
index ed91996287c7d9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/ex.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/ex.S
- *
- * The SH-2A exception vector table
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-
-! exception no 0 to 255
-exception_entry0:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline0
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline0:
- mov.l r0,@-sp
- mov.l 1f,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
-! exception no 256 to 511
-exception_entry1:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline1
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline1:
- mov.l r0,@-sp
- extu.b r1,r1
- movi20 #0x100,r0
- add r0,r1
- mov.l 1f,r0
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
- !
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry0 + vector * 6
-vector = vector + 1
- .endr
-vector = 0
- .rept 256
- .long exception_entry1 + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
deleted file mode 100644
index 0bcff11a4843d3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- *
- * FIXME! These routines can be optimized in big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t"
- : "=r" (dummy)
- : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r" (FPSCR_RCHG),
- "r" (FPSCR_INIT)
- : "memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- : "=r" (dummy)
- : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- : "memory");
- disable_fpu();
-}
-
-/*
- * Emulate arithmetic ops on denormalized number for some FPU insns.
- */
-
-/* denormalized float * float */
-static int denormal_mulf(int hx, int hy)
-{
- unsigned int ix, iy;
- unsigned long long m, n;
- int exp, w;
-
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000 || ix == 0)
- return ((hx ^ hy) & 0x80000000);
-
- exp = (iy & 0x7f800000) >> 23;
- ix &= 0x007fffff;
- iy = (iy & 0x007fffff) | 0x00800000;
- m = (unsigned long long)ix * iy;
- n = m;
- w = -1;
- while (n) { n >>= 1; w++; }
-
- /* FIXME: use guard bits */
- exp += w - 126 - 46;
- if (exp > 0)
- ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23);
- else if (exp + 22 >= 0)
- ix = (int) (m >> (w - 22 - exp)) & 0x007fffff;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x80000000;
- return ix;
-}
-
-/* denormalized double * double */
-static void mult64(unsigned long long x, unsigned long long y,
- unsigned long long *highp, unsigned long long *lowp)
-{
- unsigned long long sub0, sub1, sub2, sub3;
- unsigned long long high, low;
-
- sub0 = (x >> 32) * (unsigned long) (y >> 32);
- sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32);
- sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL);
- sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL);
- low = sub3;
- high = 0LL;
- sub3 += (sub1 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- sub3 += (sub2 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- high += (sub1 >> 32) + (sub2 >> 32);
- high += sub0;
- *lowp = low;
- *highp = high;
-}
-
-static inline long long rshift64(unsigned long long mh,
- unsigned long long ml, int n)
-{
- if (n >= 64)
- return mh >> (n - 64);
- return (mh << (64 - n)) | (ml >> n);
-}
-
-static long long denormal_muld(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- unsigned long long mh, ml, nh, nl;
- int exp, w;
-
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL || ix == 0)
- return ((hx ^ hy) & 0x8000000000000000LL);
-
- exp = (iy & 0x7ff0000000000000LL) >> 52;
- ix &= 0x000fffffffffffffLL;
- iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- mult64(ix, iy, &mh, &ml);
- nh = mh;
- nl = ml;
- w = -1;
- if (nh) {
- while (nh) { nh >>= 1; w++;}
- w += 64;
- } else
- while (nl) { nl >>= 1; w++;}
-
- /* FIXME: use guard bits */
- exp += w - 1022 - 52 * 2;
- if (exp > 0)
- ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL)
- | ((long long)exp << 52);
- else if (exp + 51 >= 0)
- ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x8000000000000000LL;
- return ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static int denormal_subf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix - iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac -= iy;
- while (frac < 0x00800000) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static int denormal_addf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix + iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac += iy;
- if (frac >= 0x01000000) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-static int denormal_addf(int hx, int hy)
-{
- unsigned int ix, iy;
- int sign;
-
- if ((hx ^ hy) & 0x80000000) {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000) {
- ix = denormal_subf1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x80000000;
- }
- } else {
- ix = denormal_subf1(iy, ix);
- sign ^= 0x80000000;
- }
- } else {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000)
- ix = denormal_addf1(ix, iy);
- else
- ix = denormal_addf1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_subd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- int exp;
-
- if (ix < 0x0010000000000000LL)
- return ix - iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac -= iy;
- while (frac < 0x0010000000000000LL) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_addd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- long long exp;
-
- if (ix < 0x0010000000000000LL)
- return ix + iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac += iy;
- if (frac >= 0x0020000000000000LL) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-static long long denormal_addd(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- long long sign;
-
- if ((hx ^ hy) & 0x8000000000000000LL) {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL) {
- ix = denormal_subd1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x8000000000000000LL;
- }
- } else {
- ix = denormal_subd1(iy, ix);
- sign ^= 0x8000000000000000LL;
- }
- } else {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL)
- ix = denormal_addd1(ix, iy);
- else
- ix = denormal_addd1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void
-denormal_to_double (struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n+1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int
-ieee_fpe_handler (struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *) regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf};
-
- if (nib[0] == 0xb ||
- (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
- regs->pr = regs->pc + 4;
- if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
- nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (insn == 0x000b) { /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else {
- nextpc = regs->pc + 2;
- finsn = insn;
- }
-
-#define FPSCR_FPU_ERROR (1 << 17)
-
- if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
- /* FPU error */
- denormal_to_double (&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) { /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((hx & 0x7fffffff) >= 0x00100000)
- llx = denormal_muld(lly, llx);
- else
- llx = denormal_muld(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((hx & 0x7fffffff) >= 0x00800000)
- hx = denormal_mulf(hy, hx);
- else
- hx = denormal_mulf(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = denormal_addd(llx, lly);
- else
- llx = denormal_addd(llx, lly ^ (1LL << 63));
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((finsn & 0xf00f) == 0xf000)
- hx = denormal_addf(hx, hy);
- else
- hx = denormal_addf(hx, hy ^ 0x80000000);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- return;
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh2a/opcode_helper.c b/arch/sh/kernel/cpu/sh2a/opcode_helper.c
deleted file mode 100644
index c509081d90b9af..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/opcode_helper.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/opcode_helper.c
- *
- * Helper for the SH-2A 32-bit opcodes.
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-
-/*
- * Instructions on SH are generally fixed at 16-bits, however, SH-2A
- * introduces some 32-bit instructions. Since there are no real
- * constraints on their use (and they can be mixed and matched), we need
- * to check the instruction encoding to work out if it's a true 32-bit
- * instruction or not.
- *
- * Presently, 32-bit opcodes have only slight variations in what the
- * actual encoding looks like in the first-half of the instruction, which
- * makes it fairly straightforward to differentiate from the 16-bit ones.
- *
- * First 16-bits of encoding Used by
- *
- * 0011nnnnmmmm0001 mov.b, mov.w, mov.l, fmov.d,
- * fmov.s, movu.b, movu.w
- *
- * 0011nnnn0iii1001 bclr.b, bld.b, bset.b, bst.b, band.b,
- * bandnot.b, bldnot.b, bor.b, bornot.b,
- * bxor.b
- *
- * 0000nnnniiii0000 movi20
- * 0000nnnniiii0001 movi20s
- */
-unsigned int instruction_size(unsigned int insn)
-{
- /* Look for the common cases */
- switch ((insn & 0xf00f)) {
- case 0x0000: /* movi20 */
- case 0x0001: /* movi20s */
- case 0x3001: /* 32-bit mov/fmov/movu variants */
- return 4;
- }
-
- /* And the special cases.. */
- switch ((insn & 0xf08f)) {
- case 0x3009: /* 32-bit b*.b bit operations */
- return 4;
- }
-
- return 2;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
deleted file mode 100644
index a6777e6fc8cdc2..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7203_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe3a9f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7203", sh7203_pfc_resources,
- ARRAY_SIZE(sh7203_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
deleted file mode 100644
index 7a103e16cf01b0..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7264_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe393f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7264", sh7264_pfc_resources,
- ARRAY_SIZE(sh7264_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
deleted file mode 100644
index 4da432ef1b40a9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7269_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe391f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7269", sh7269_pfc_resources,
- ARRAY_SIZE(sh7269_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
deleted file mode 100644
index c66a3bc882bf9a..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/probe.c
- *
- * CPU Subtype Probing for SH-2A.
- *
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- boot_cpu_data.family = CPU_FAMILY_SH2A;
-
- /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
- boot_cpu_data.flags |= CPU_HAS_OP32;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
- boot_cpu_data.type = CPU_SH7201;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203)
- boot_cpu_data.type = CPU_SH7203;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7263)
- boot_cpu_data.type = CPU_SH7263;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7264)
- boot_cpu_data.type = CPU_SH7264;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
- boot_cpu_data.type = CPU_SH7269;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
- boot_cpu_data.type = CPU_SH7206;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#elif defined(CONFIG_CPU_SUBTYPE_MXG)
- boot_cpu_data.type = CPU_MXG;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#endif
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * The icache is the same as the dcache as far as this setup is
- * concerned. The only real difference in hardware is that the icache
- * lacks the U bit that the dcache has, none of this has any bearing
- * on the cache info.
- */
- boot_cpu_data.icache = boot_cpu_data.dcache;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
deleted file mode 100644
index cefa07924c16db..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas MX-G (R8A03022BG) Setup
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
-
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
-
- SCIF0, SCIF1,
-
- MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
- MTU2_TGI3B, MTU2_TGI3C,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
- INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
- INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
- INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
- INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
- INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
- INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
-
- INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
- INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
- INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
- INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
-
- INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
- INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
- INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
-
- INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
- INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
- INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
-
- INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
- INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
-
- INTC_IRQ(MTU2_TGI3B, 244),
- INTC_IRQ(MTU2_TGI3C, 245),
-
- INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
- INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
- INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
-
- INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
- INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
- { 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
- { 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
- { 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
- { 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
- { 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
- { 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
- { 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
- { 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
- { 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
- { 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
- { 0xfffd9812, 0, 16, 4, /* IPR15 */
- { SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
- { 0xfffd9814, 0, 16, 4, /* IPR16 */
- { MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffd9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xff801000, 0x400),
- DEFINE_RES_IRQ_NAMED(228, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(234, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(240, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff804000, 0x100),
- DEFINE_RES_IRQ(220),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct platform_device *mxg_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-static int __init mxg_devices_setup(void)
-{
- return platform_add_devices(mxg_devices,
- ARRAY_SIZE(mxg_devices));
-}
-arch_initcall(mxg_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *mxg_early_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(mxg_early_devices,
- ARRAY_SIZE(mxg_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
deleted file mode 100644
index 28f1bebf340565..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7201 setup
- *
- * Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- ADC_ADI,
-
- MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
- MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
-
- RTC, WDT,
-
- IIC30, IIC31, IIC32,
-
- DMAC0_DMINT0, DMAC1_DMINT1,
- DMAC2_DMINT2, DMAC3_DMINT3,
-
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-
- DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
- DMAC7_DMINT7,
-
- RCAN0, RCAN1,
-
- SSI0_SSII, SSI1_SSII,
-
- TMR0, TMR1,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(ADC_ADI, 92),
-
- INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
- INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
-
- INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
- INTC_IRQ(MTU20_VEF, 114),
-
- INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
- INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
-
- INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
- INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
-
- INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
- INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
-
- INTC_IRQ(MTU2_TCI3V, 136),
-
- INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
- INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
-
- INTC_IRQ(MTU2_TCI4V, 144),
-
- INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
- INTC_IRQ(MTU25_UVW, 150),
-
- INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
- INTC_IRQ(RTC, 154),
-
- INTC_IRQ(WDT, 156),
-
- INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
- INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
- INTC_IRQ(IIC30, 161),
-
- INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
- INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
- INTC_IRQ(IIC31, 168),
-
- INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
- INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
- INTC_IRQ(IIC32, 174),
-
- INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
- INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
-
- INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
- INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
- INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
- INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
- INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
- INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
- INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
- INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
- INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
- INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
- INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
- INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
- INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
- INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
- INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
- INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
-
- INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
- INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
- INTC_IRQ(DMAC7_DMINT7, 219),
-
- INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
- INTC_IRQ(RCAN0, 230),
- INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
-
- INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
- INTC_IRQ(RCAN1, 236),
- INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
-
- INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
-
- INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
- INTC_IRQ(TMR0, 248),
-
- INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
- INTC_IRQ(TMR1, 254),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe9420, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI, 0 } },
- { 0xfffe9800, 0, 16, 4, /* IPR06 */ { 0, MTU20_ABCD, MTU20_VEF, MTU21_AB } },
- { 0xfffe9802, 0, 16, 4, /* IPR07 */ { MTU21_VU, MTU22_AB, MTU22_VU, MTU23_ABCD } },
- { 0xfffe9804, 0, 16, 4, /* IPR08 */ { MTU2_TCI3V, MTU24_ABCD, MTU2_TCI4V, MTU25_UVW } },
-
- { 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
- { 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
- { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
- { 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
- { 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } },
- { 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
- { 0xfffe9812, 0, 16, 4, /* IPR15 */ { 0, RCAN0, RCAN1, 0 } },
- { 0xfffe9814, 0, 16, 4, /* IPR16 */ { SSI0_SSII, SSI1_SSII, TMR0, TMR1 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(180),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(184),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(188),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(208),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff0800,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 152,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(108, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(116, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(124, "tgi1b"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7201_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &rtc_device,
- &mtu2_device,
-};
-
-static int __init sh7201_devices_setup(void)
-{
- return platform_add_devices(sh7201_devices,
- ARRAY_SIZE(sh7201_devices));
-}
-arch_initcall(sh7201_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7201_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-
-void __init plat_early_device_setup(void)
-{
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7201_early_devices,
- ARRAY_SIZE(sh7201_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
deleted file mode 100644
index 4839f3aaeb4c21..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 and SH7263 Setup
- *
- * Copyright (C) 2007 - 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- USB, LCDC, CMT0, CMT1, BSC, WDT,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
-
- ADC_ADI,
-
- IIC30, IIC31, IIC32, IIC33,
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- SSU0, SSU1,
-
- SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
-
- /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
- ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
- SRC, IEBI,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
- INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
- INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
- INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
- INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
- INTC_IRQ(MTU0_VEF, 150),
- INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
- INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
- INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
- INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
- INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
- INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
- INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
- INTC_IRQ(MTU2_TCI3V, 165),
- INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
- INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
- INTC_IRQ(MTU2_TCI4V, 170),
- INTC_IRQ(ADC_ADI, 171),
- INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
- INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
- INTC_IRQ(IIC30, 176),
- INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
- INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
- INTC_IRQ(IIC31, 181),
- INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
- INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
- INTC_IRQ(IIC32, 186),
- INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
- INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
- INTC_IRQ(IIC33, 191),
- INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
- INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
- INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
- INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
- INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
- INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
- INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
- INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
- INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
- INTC_IRQ(SSU0, 210),
- INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
- INTC_IRQ(SSU1, 213),
- INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
- INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
- INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
- INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
- INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
- INTC_IRQ(RTC, 233),
- INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
- INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
- INTC_IRQ(RCAN0, 238),
- INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
- INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
- INTC_IRQ(RCAN1, 243),
-
- /* SH7263-specific trash */
-#ifdef CONFIG_CPU_SUBTYPE_SH7263
- INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
- INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
- INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
-
- INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
- INTC_IRQ(SDHI, 230),
-
- INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
- INTC_IRQ(SRC, 246),
-
- INTC_IRQ(IEBI, 247),
-#endif
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB,
- MTU2_VU } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD,
- MTU2_TCI4V } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } },
-#ifdef CONFIG_CPU_SUBTYPE_SH7203
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, 0 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } },
-#else
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, ROMDEC } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } },
-#endif
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(142),
- DEFINE_RES_IRQ(143),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(146, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(153, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff2000,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 231,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct platform_device *sh7203_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
-};
-
-static int __init sh7203_devices_setup(void)
-{
- return platform_add_devices(sh7203_devices,
- ARRAY_SIZE(sh7203_devices));
-}
-arch_initcall(sh7203_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7203_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7203_early_devices,
- ARRAY_SIZE(sh7203_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
deleted file mode 100644
index 68add5af4cc56e..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7206 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- ADC_ADI0, ADC_ADI1,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
- IIC3,
-
- CMT0, CMT1, BSC, WDT,
-
- MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
-
- POE2_OEI3,
-
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
- INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
- INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
- INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
- INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
- INTC_IRQ(MTU0_VEF, 162),
- INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
- INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
- INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
- INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
- INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
- INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
- INTC_IRQ(MTU2_TCI3V, 184),
- INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
- INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
- INTC_IRQ(MTU2_TCI4V, 192),
- INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
- INTC_IRQ(MTU5, 198),
- INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
- INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
- INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
- INTC_IRQ(MTU2S_TCI3V, 208),
- INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
- INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
- INTC_IRQ(MTU2S_TCI4V, 216),
- INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
- INTC_IRQ(MTU5S, 222),
- INTC_IRQ(POE2_OEI3, 224),
- INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
- INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
- INTC_IRQ(IIC3, 232),
- INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
- INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
- INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
- INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
- INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
- INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
- INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
- INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU2_TCI3V } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V,
- MTU5, POE2_12 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V,
- MTU4S_ABCD, MTU2S_TCI4V } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(140),
- DEFINE_RES_IRQ(144),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(156, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(164, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(180, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2s",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7206_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-static int __init sh7206_devices_setup(void)
-{
- return platform_add_devices(sh7206_devices,
- ARRAY_SIZE(sh7206_devices));
-}
-arch_initcall(sh7206_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7206_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7206_early_devices,
- ARRAY_SIZE(sh7206_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
deleted file mode 100644
index 8a1cb613dd2e04..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
+++ /dev/null
@@ -1,552 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC3, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- SIO_FIFO, RSPIC0, RSPIC1,
- RCAN0, RCAN1, IEBC, CD_ROMD,
- NFMC, SDHI, RTC,
- SRCC0, SRCC1, DCOMU, OFFI, IFEI,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
- INTC_IRQ(VDC3, 171), INTC_IRQ(VDC3, 172),
- INTC_IRQ(VDC3, 173), INTC_IRQ(VDC3, 174),
- INTC_IRQ(CMT0, 175), INTC_IRQ(CMT1, 176),
- INTC_IRQ(BSC, 177), INTC_IRQ(WDT, 178),
-
- INTC_IRQ(MTU0_ABCD, 179), INTC_IRQ(MTU0_ABCD, 180),
- INTC_IRQ(MTU0_ABCD, 181), INTC_IRQ(MTU0_ABCD, 182),
- INTC_IRQ(MTU0_VEF, 183),
- INTC_IRQ(MTU0_VEF, 184), INTC_IRQ(MTU0_VEF, 185),
- INTC_IRQ(MTU1_AB, 186), INTC_IRQ(MTU1_AB, 187),
- INTC_IRQ(MTU1_VU, 188), INTC_IRQ(MTU1_VU, 189),
- INTC_IRQ(MTU2_AB, 190), INTC_IRQ(MTU2_AB, 191),
- INTC_IRQ(MTU2_VU, 192), INTC_IRQ(MTU2_VU, 193),
- INTC_IRQ(MTU3_ABCD, 194), INTC_IRQ(MTU3_ABCD, 195),
- INTC_IRQ(MTU3_ABCD, 196), INTC_IRQ(MTU3_ABCD, 197),
- INTC_IRQ(MTU3_TCI3V, 198),
- INTC_IRQ(MTU4_ABCD, 199), INTC_IRQ(MTU4_ABCD, 200),
- INTC_IRQ(MTU4_ABCD, 201), INTC_IRQ(MTU4_ABCD, 202),
- INTC_IRQ(MTU4_TCI4V, 203),
-
- INTC_IRQ(PWMT1, 204), INTC_IRQ(PWMT2, 205),
-
- INTC_IRQ(ADC_ADI, 206),
-
- INTC_IRQ(SSIF0, 207), INTC_IRQ(SSIF0, 208),
- INTC_IRQ(SSIF0, 209),
- INTC_IRQ(SSII1, 210), INTC_IRQ(SSII1, 211),
- INTC_IRQ(SSII2, 212), INTC_IRQ(SSII2, 213),
- INTC_IRQ(SSII3, 214), INTC_IRQ(SSII3, 215),
-
- INTC_IRQ(RSPDIF, 216),
-
- INTC_IRQ(IIC30, 217), INTC_IRQ(IIC30, 218),
- INTC_IRQ(IIC30, 219), INTC_IRQ(IIC30, 220),
- INTC_IRQ(IIC30, 221),
- INTC_IRQ(IIC31, 222), INTC_IRQ(IIC31, 223),
- INTC_IRQ(IIC31, 224), INTC_IRQ(IIC31, 225),
- INTC_IRQ(IIC31, 226),
- INTC_IRQ(IIC32, 227), INTC_IRQ(IIC32, 228),
- INTC_IRQ(IIC32, 229), INTC_IRQ(IIC32, 230),
- INTC_IRQ(IIC32, 231),
-
- INTC_IRQ(SCIF0_BRI, 232), INTC_IRQ(SCIF0_ERI, 233),
- INTC_IRQ(SCIF0_RXI, 234), INTC_IRQ(SCIF0_TXI, 235),
- INTC_IRQ(SCIF1_BRI, 236), INTC_IRQ(SCIF1_ERI, 237),
- INTC_IRQ(SCIF1_RXI, 238), INTC_IRQ(SCIF1_TXI, 239),
- INTC_IRQ(SCIF2_BRI, 240), INTC_IRQ(SCIF2_ERI, 241),
- INTC_IRQ(SCIF2_RXI, 242), INTC_IRQ(SCIF2_TXI, 243),
- INTC_IRQ(SCIF3_BRI, 244), INTC_IRQ(SCIF3_ERI, 245),
- INTC_IRQ(SCIF3_RXI, 246), INTC_IRQ(SCIF3_TXI, 247),
- INTC_IRQ(SCIF4_BRI, 248), INTC_IRQ(SCIF4_ERI, 249),
- INTC_IRQ(SCIF4_RXI, 250), INTC_IRQ(SCIF4_TXI, 251),
- INTC_IRQ(SCIF5_BRI, 252), INTC_IRQ(SCIF5_ERI, 253),
- INTC_IRQ(SCIF5_RXI, 254), INTC_IRQ(SCIF5_TXI, 255),
- INTC_IRQ(SCIF6_BRI, 256), INTC_IRQ(SCIF6_ERI, 257),
- INTC_IRQ(SCIF6_RXI, 258), INTC_IRQ(SCIF6_TXI, 259),
- INTC_IRQ(SCIF7_BRI, 260), INTC_IRQ(SCIF7_ERI, 261),
- INTC_IRQ(SCIF7_RXI, 262), INTC_IRQ(SCIF7_TXI, 263),
-
- INTC_IRQ(SIO_FIFO, 264),
-
- INTC_IRQ(RSPIC0, 265), INTC_IRQ(RSPIC0, 266),
- INTC_IRQ(RSPIC0, 267),
- INTC_IRQ(RSPIC1, 268), INTC_IRQ(RSPIC1, 269),
- INTC_IRQ(RSPIC1, 270),
-
- INTC_IRQ(RCAN0, 271), INTC_IRQ(RCAN0, 272),
- INTC_IRQ(RCAN0, 273), INTC_IRQ(RCAN0, 274),
- INTC_IRQ(RCAN0, 275),
- INTC_IRQ(RCAN1, 276), INTC_IRQ(RCAN1, 277),
- INTC_IRQ(RCAN1, 278), INTC_IRQ(RCAN1, 279),
- INTC_IRQ(RCAN1, 280),
-
- INTC_IRQ(IEBC, 281),
-
- INTC_IRQ(CD_ROMD, 282), INTC_IRQ(CD_ROMD, 283),
- INTC_IRQ(CD_ROMD, 284), INTC_IRQ(CD_ROMD, 285),
- INTC_IRQ(CD_ROMD, 286), INTC_IRQ(CD_ROMD, 287),
-
- INTC_IRQ(NFMC, 288), INTC_IRQ(NFMC, 289),
- INTC_IRQ(NFMC, 290), INTC_IRQ(NFMC, 291),
-
- INTC_IRQ(SDHI, 292), INTC_IRQ(SDHI, 293),
- INTC_IRQ(SDHI, 294),
-
- INTC_IRQ(RTC, 296), INTC_IRQ(RTC, 297),
- INTC_IRQ(RTC, 298),
-
- INTC_IRQ(SRCC0, 299), INTC_IRQ(SRCC0, 300),
- INTC_IRQ(SRCC0, 301), INTC_IRQ(SRCC0, 302),
- INTC_IRQ(SRCC0, 303),
- INTC_IRQ(SRCC1, 304), INTC_IRQ(SRCC1, 305),
- INTC_IRQ(SRCC1, 306), INTC_IRQ(SRCC1, 307),
- INTC_IRQ(SRCC1, 308),
-
- INTC_IRQ(DCOMU, 310), INTC_IRQ(DCOMU, 311),
- INTC_IRQ(DCOMU, 312),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC3, CMT0, CMT1 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU1_AB, MTU1_VU,
- MTU2_AB, MTU2_VU } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU3_ABCD, MTU3_TCI3V,
- MTU4_ABCD, MTU4_TCI4V } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { PWMT1, PWMT2, ADC_ADI, 0 } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSIF0, SSII1, SSII2, SSII3 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { RSPDIF, IIC30, IIC31, IIC32 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { SIO_FIFO, 0, RSPIC0, RSPIC1, } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { RCAN0, RCAN1, IEBC, CD_ROMD } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { NFMC, SDHI, RTC, 0 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { SRCC0, SRCC1, 0, DCOMU } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7264", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(233),
- DEFINE_RES_IRQ(234),
- DEFINE_RES_IRQ(235),
- DEFINE_RES_IRQ(232),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(237),
- DEFINE_RES_IRQ(238),
- DEFINE_RES_IRQ(239),
- DEFINE_RES_IRQ(236),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(241),
- DEFINE_RES_IRQ(242),
- DEFINE_RES_IRQ(243),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(245),
- DEFINE_RES_IRQ(246),
- DEFINE_RES_IRQ(247),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(249),
- DEFINE_RES_IRQ(250),
- DEFINE_RES_IRQ(251),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(253),
- DEFINE_RES_IRQ(254),
- DEFINE_RES_IRQ(255),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(257),
- DEFINE_RES_IRQ(258),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(256),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(262),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(260),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(175),
- DEFINE_RES_IRQ(176),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(179, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(186, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 296,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static void usb_port_power(int port, int power)
-{
- __raw_writew(0x200 , 0xffffc0c2) ; /* Initialise UACS25 */
-}
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
- .port_power = usb_port_power,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xffffc000,
- .end = 0xffffc0e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7264_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7264_devices_setup(void)
-{
- return platform_add_devices(sh7264_devices,
- ARRAY_SIZE(sh7264_devices));
-}
-arch_initcall(sh7264_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7264_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7264_early_devices,
- ARRAY_SIZE(sh7264_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
deleted file mode 100644
index 8b1ef3028320c7..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
+++ /dev/null
@@ -1,568 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC4, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3, SSII4, SSII5,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- RCAN0, RCAN1, RCAN2,
- RSPIC0, RSPIC1,
- IEBC, CD_ROMD,
- NFMC,
- SDHI0, SDHI1,
- RTC,
- SRCC0, SRCC1, SRCC2,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
-
- INTC_IRQ(VDC4, 171), INTC_IRQ(VDC4, 172),
- INTC_IRQ(VDC4, 173), INTC_IRQ(VDC4, 174),
- INTC_IRQ(VDC4, 175), INTC_IRQ(VDC4, 176),
- INTC_IRQ(VDC4, 177), INTC_IRQ(VDC4, 177),
-
- INTC_IRQ(CMT0, 188), INTC_IRQ(CMT1, 189),
-
- INTC_IRQ(BSC, 190), INTC_IRQ(WDT, 191),
-
- INTC_IRQ(MTU0_ABCD, 192), INTC_IRQ(MTU0_ABCD, 193),
- INTC_IRQ(MTU0_ABCD, 194), INTC_IRQ(MTU0_ABCD, 195),
- INTC_IRQ(MTU0_VEF, 196), INTC_IRQ(MTU0_VEF, 197),
- INTC_IRQ(MTU0_VEF, 198),
- INTC_IRQ(MTU1_AB, 199), INTC_IRQ(MTU1_AB, 200),
- INTC_IRQ(MTU1_VU, 201), INTC_IRQ(MTU1_VU, 202),
- INTC_IRQ(MTU2_AB, 203), INTC_IRQ(MTU2_AB, 204),
- INTC_IRQ(MTU2_VU, 205), INTC_IRQ(MTU2_VU, 206),
- INTC_IRQ(MTU3_ABCD, 207), INTC_IRQ(MTU3_ABCD, 208),
- INTC_IRQ(MTU3_ABCD, 209), INTC_IRQ(MTU3_ABCD, 210),
- INTC_IRQ(MTU3_TCI3V, 211),
- INTC_IRQ(MTU4_ABCD, 212), INTC_IRQ(MTU4_ABCD, 213),
- INTC_IRQ(MTU4_ABCD, 214), INTC_IRQ(MTU4_ABCD, 215),
- INTC_IRQ(MTU4_TCI4V, 216),
-
- INTC_IRQ(PWMT1, 217), INTC_IRQ(PWMT2, 218),
-
- INTC_IRQ(ADC_ADI, 223),
-
- INTC_IRQ(SSIF0, 224), INTC_IRQ(SSIF0, 225),
- INTC_IRQ(SSIF0, 226),
- INTC_IRQ(SSII1, 227), INTC_IRQ(SSII1, 228),
- INTC_IRQ(SSII2, 229), INTC_IRQ(SSII2, 230),
- INTC_IRQ(SSII3, 231), INTC_IRQ(SSII3, 232),
- INTC_IRQ(SSII4, 233), INTC_IRQ(SSII4, 234),
- INTC_IRQ(SSII5, 235), INTC_IRQ(SSII5, 236),
-
- INTC_IRQ(RSPDIF, 237),
-
- INTC_IRQ(IIC30, 238), INTC_IRQ(IIC30, 239),
- INTC_IRQ(IIC30, 240), INTC_IRQ(IIC30, 241),
- INTC_IRQ(IIC30, 242),
- INTC_IRQ(IIC31, 243), INTC_IRQ(IIC31, 244),
- INTC_IRQ(IIC31, 245), INTC_IRQ(IIC31, 246),
- INTC_IRQ(IIC31, 247),
- INTC_IRQ(IIC32, 248), INTC_IRQ(IIC32, 249),
- INTC_IRQ(IIC32, 250), INTC_IRQ(IIC32, 251),
- INTC_IRQ(IIC32, 252),
- INTC_IRQ(IIC33, 253), INTC_IRQ(IIC33, 254),
- INTC_IRQ(IIC33, 255), INTC_IRQ(IIC33, 256),
- INTC_IRQ(IIC33, 257),
-
- INTC_IRQ(SCIF0_BRI, 258), INTC_IRQ(SCIF0_ERI, 259),
- INTC_IRQ(SCIF0_RXI, 260), INTC_IRQ(SCIF0_TXI, 261),
- INTC_IRQ(SCIF1_BRI, 262), INTC_IRQ(SCIF1_ERI, 263),
- INTC_IRQ(SCIF1_RXI, 264), INTC_IRQ(SCIF1_TXI, 265),
- INTC_IRQ(SCIF2_BRI, 266), INTC_IRQ(SCIF2_ERI, 267),
- INTC_IRQ(SCIF2_RXI, 268), INTC_IRQ(SCIF2_TXI, 269),
- INTC_IRQ(SCIF3_BRI, 270), INTC_IRQ(SCIF3_ERI, 271),
- INTC_IRQ(SCIF3_RXI, 272), INTC_IRQ(SCIF3_TXI, 273),
- INTC_IRQ(SCIF4_BRI, 274), INTC_IRQ(SCIF4_ERI, 275),
- INTC_IRQ(SCIF4_RXI, 276), INTC_IRQ(SCIF4_TXI, 277),
- INTC_IRQ(SCIF5_BRI, 278), INTC_IRQ(SCIF5_ERI, 279),
- INTC_IRQ(SCIF5_RXI, 280), INTC_IRQ(SCIF5_TXI, 281),
- INTC_IRQ(SCIF6_BRI, 282), INTC_IRQ(SCIF6_ERI, 283),
- INTC_IRQ(SCIF6_RXI, 284), INTC_IRQ(SCIF6_TXI, 285),
- INTC_IRQ(SCIF7_BRI, 286), INTC_IRQ(SCIF7_ERI, 287),
- INTC_IRQ(SCIF7_RXI, 288), INTC_IRQ(SCIF7_TXI, 289),
-
- INTC_IRQ(RCAN0, 291), INTC_IRQ(RCAN0, 292),
- INTC_IRQ(RCAN0, 293), INTC_IRQ(RCAN0, 294),
- INTC_IRQ(RCAN0, 295),
- INTC_IRQ(RCAN1, 296), INTC_IRQ(RCAN1, 297),
- INTC_IRQ(RCAN1, 298), INTC_IRQ(RCAN1, 299),
- INTC_IRQ(RCAN1, 300),
- INTC_IRQ(RCAN2, 301), INTC_IRQ(RCAN2, 302),
- INTC_IRQ(RCAN2, 303), INTC_IRQ(RCAN2, 304),
- INTC_IRQ(RCAN2, 305),
-
- INTC_IRQ(RSPIC0, 306), INTC_IRQ(RSPIC0, 307),
- INTC_IRQ(RSPIC0, 308),
- INTC_IRQ(RSPIC1, 309), INTC_IRQ(RSPIC1, 310),
- INTC_IRQ(RSPIC1, 311),
-
- INTC_IRQ(IEBC, 318),
-
- INTC_IRQ(CD_ROMD, 319), INTC_IRQ(CD_ROMD, 320),
- INTC_IRQ(CD_ROMD, 321), INTC_IRQ(CD_ROMD, 322),
- INTC_IRQ(CD_ROMD, 323), INTC_IRQ(CD_ROMD, 324),
-
- INTC_IRQ(NFMC, 325), INTC_IRQ(NFMC, 326),
- INTC_IRQ(NFMC, 327), INTC_IRQ(NFMC, 328),
-
- INTC_IRQ(SDHI0, 332), INTC_IRQ(SDHI0, 333),
- INTC_IRQ(SDHI0, 334),
- INTC_IRQ(SDHI1, 335), INTC_IRQ(SDHI1, 336),
- INTC_IRQ(SDHI1, 337),
-
- INTC_IRQ(RTC, 338), INTC_IRQ(RTC, 339),
- INTC_IRQ(RTC, 340),
-
- INTC_IRQ(SRCC0, 341), INTC_IRQ(SRCC0, 342),
- INTC_IRQ(SRCC0, 343), INTC_IRQ(SRCC0, 344),
- INTC_IRQ(SRCC0, 345),
- INTC_IRQ(SRCC1, 346), INTC_IRQ(SRCC1, 347),
- INTC_IRQ(SRCC1, 348), INTC_IRQ(SRCC1, 349),
- INTC_IRQ(SRCC1, 350),
- INTC_IRQ(SRCC2, 351), INTC_IRQ(SRCC2, 352),
- INTC_IRQ(SRCC2, 353), INTC_IRQ(SRCC2, 354),
- INTC_IRQ(SRCC2, 355),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC4, VDC4, VDC4 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { 0, 0, 0, 0 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { 0, 0, 0, 0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { ADC_ADI, SSIF0, SSII1, SSII2 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SSII3, SSII4, SSII5, RSPDIF} },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { IIC30, IIC31, IIC32, IIC33 } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { 0, RCAN0, RCAN1, RCAN2 } },
- { 0xfffe0c22, 0, 16, 4, /* IPR23 */ { RSPIC0, RSPIC1, 0, 0 } },
- { 0xfffe0c24, 0, 16, 4, /* IPR24 */ { IEBC, CD_ROMD, NFMC, 0 } },
- { 0xfffe0c26, 0, 16, 4, /* IPR25 */ { SDHI0, SDHI1, RTC, 0 } },
- { 0xfffe0c28, 0, 16, 4, /* IPR26 */ { SRCC0, SRCC1, SRCC2, 0 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7269", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xe8007000, 0x100),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(260),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(258),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xe8007800, 0x100),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(264),
- DEFINE_RES_IRQ(265),
- DEFINE_RES_IRQ(262),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xe8008000, 0x100),
- DEFINE_RES_IRQ(267),
- DEFINE_RES_IRQ(268),
- DEFINE_RES_IRQ(269),
- DEFINE_RES_IRQ(266),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xe8008800, 0x100),
- DEFINE_RES_IRQ(271),
- DEFINE_RES_IRQ(272),
- DEFINE_RES_IRQ(273),
- DEFINE_RES_IRQ(270),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xe8009000, 0x100),
- DEFINE_RES_IRQ(275),
- DEFINE_RES_IRQ(276),
- DEFINE_RES_IRQ(277),
- DEFINE_RES_IRQ(274),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xe8009800, 0x100),
- DEFINE_RES_IRQ(279),
- DEFINE_RES_IRQ(280),
- DEFINE_RES_IRQ(281),
- DEFINE_RES_IRQ(278),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xe800a000, 0x100),
- DEFINE_RES_IRQ(283),
- DEFINE_RES_IRQ(284),
- DEFINE_RES_IRQ(285),
- DEFINE_RES_IRQ(282),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xe800a800, 0x100),
- DEFINE_RES_IRQ(287),
- DEFINE_RES_IRQ(288),
- DEFINE_RES_IRQ(289),
- DEFINE_RES_IRQ(286),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(188),
- DEFINE_RES_IRQ(189),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(192, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(203, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 338,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xe8010000,
- .end = 0xe80100e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7269_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7269_devices_setup(void)
-{
- return platform_add_devices(sh7269_devices,
- ARRAY_SIZE(sh7269_devices));
-}
-arch_initcall(sh7269_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7269_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7269_early_devices,
- ARRAY_SIZE(sh7269_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
deleted file mode 100644
index 1dcb43d93c8632..00000000000000
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-3 backends.
-#
-
-obj-y := ex.o probe.o entry.o setup-sh3.o
-
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o serial-sh7720.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o serial-sh7720.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SH3) := clock-sh3.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7720) := pinmux-sh7720.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
deleted file mode 100644
index d7765728cadf5a..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh3.c
- *
- * Generic SH-3 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh3_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh3_clk_ops[] = {
- &sh3_master_clk_ops,
- &sh3_module_clk_ops,
- &sh3_bus_clk_ops,
- &sh3_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh3_clk_ops))
- *ops = sh3_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
deleted file mode 100644
index 4947114af0901b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7705.c
- *
- * SH7705 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-/*
- * SH7705 uses the same divisors as the generic SH-3 case, it's just the
- * FRQCR layout that is a bit different..
- */
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7705_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readw(FRQCR) & 0x0003;
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7705_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7705_clk_ops[] = {
- &sh7705_master_clk_ops,
- &sh7705_module_clk_ops,
- &sh7705_bus_clk_ops,
- &sh7705_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7705_clk_ops))
- *ops = sh7705_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
deleted file mode 100644
index 17855022c118f5..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7706.c
- *
- * SH7706 support for the clock framework
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7706_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7706_clk_ops[] = {
- &sh7706_master_clk_ops,
- &sh7706_module_clk_ops,
- &sh7706_bus_clk_ops,
- &sh7706_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7706_clk_ops))
- *ops = sh7706_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
deleted file mode 100644
index 54701bbf7caae7..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7709.c
- *
- * SH7709 support for the clock framework
- *
- * Copyright (C) 2005 Andriy Skulysh
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0080) ?
- ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
-
- return clk->parent->rate * stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7709_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7709_clk_ops[] = {
- &sh7709_master_clk_ops,
- &sh7709_module_clk_ops,
- &sh7709_bus_clk_ops,
- &sh7709_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7709_clk_ops))
- *ops = sh7709_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
deleted file mode 100644
index e60d0bc19cbe96..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7710.c
- *
- * SH7710 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh7710_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7710_clk_ops[] = {
- &sh7710_master_clk_ops,
- &sh7710_module_clk_ops,
- &sh7710_bus_clk_ops,
- &sh7710_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7710_clk_ops))
- *ops = sh7710_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
deleted file mode 100644
index 5af553f38d3a59..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7712.c
- *
- * SH7712 support for the clock framework
- *
- * Copyright (C) 2007 Andrew Murray <amurray@mpc-data.co.uk>
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int multipliers[] = { 1, 2, 3 };
-static int divisors[] = { 1, 2, 3, 4, 6 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0300) >> 8;
-
- clk->rate *= multipliers[idx];
-}
-
-static struct sh_clk_ops sh7712_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = frqcr & 0x0007;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0030) >> 4;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7712_clk_ops[] = {
- &sh7712_master_clk_ops,
- &sh7712_module_clk_ops,
- &sh7712_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7712_clk_ops))
- *ops = sh7712_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
deleted file mode 100644
index e48b3dd996f58d..00000000000000
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ /dev/null
@@ -1,509 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/entry.S
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <cpu/mmu_context.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+8)
-OFF_TRA = (16*4+6*4)
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-#define g_imask r6 /* r6_bank1 */
-#define k_g_imask r6_bank /* r6_bank1 */
-#define current r7 /* r7_bank1 */
-
-#include <asm/entry-macros.S>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * k2 scratch (Exception code)
- * k3 scratch (Return address)
- * k4 scratch
- * k5 reserved
- * k6 Global Interrupt Mask (0--15 << 4)
- * k7 CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-!
-! TLB Miss / Initial Page write exception handling
-! _and_
-! TLB hits, but the access violate the protection.
-! It can be valid access, such as stack grow and/or C-O-W.
-!
-!
-! Find the pmd/pte entry and loadtlb
-! If it's not found, cause address error (SEGV)
-!
-! Although this could be written in assembly language (and it'd be faster),
-! this first version depends *much* on C implementation.
-!
-
-#if defined(CONFIG_MMU)
- .align 2
-ENTRY(tlb_miss_load)
- bra call_handle_tlbmiss
- mov #0, r5
-
- .align 2
-ENTRY(tlb_miss_store)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_WRITE, r5
-
- .align 2
-ENTRY(initial_page_write)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_INITIAL, r5
-
- .align 2
-ENTRY(tlb_protection_violation_load)
- bra call_do_page_fault
- mov #FAULT_CODE_PROT, r5
-
- .align 2
-ENTRY(tlb_protection_violation_store)
- bra call_do_page_fault
- mov #(FAULT_CODE_PROT | FAULT_CODE_WRITE), r5
-
-call_handle_tlbmiss:
- mov.l 1f, r0
- mov r5, r8
- mov.l @r0, r6
- mov.l 2f, r0
- sts pr, r10
- jsr @r0
- mov r15, r4
- !
- tst r0, r0
- bf/s 0f
- lds r10, pr
- rts
- nop
-0:
- mov r8, r5
-call_do_page_fault:
- mov.l 1f, r0
- mov.l @r0, r6
-
- mov.l 3f, r0
- mov.l 4f, r1
- mov r15, r4
- jmp @r0
- lds r1, pr
-
- .align 2
-1: .long MMU_TEA
-2: .long handle_tlbmiss
-3: .long do_page_fault
-4: .long ret_from_exception
-
- .align 2
-ENTRY(address_error_load)
- bra call_dae
- mov #0,r5 ! writeaccess = 0
-
- .align 2
-ENTRY(address_error_store)
- bra call_dae
- mov #1,r5 ! writeaccess = 1
-
- .align 2
-call_dae:
- mov.l 1f, r0
- mov.l @r0, r6 ! address
- mov.l 2f, r0
- jmp @r0
- mov r15, r4 ! regs
-
- .align 2
-1: .long MMU_TEA
-2: .long do_address_error
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov.l 1f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- mov k4, r15
- !
- mov.l 2f, k0
- mov.l @k0, k0
- jmp @k0
- ldc k3, ssr
- .align 2
-1: .long 0x300000f0
-2: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-! restore_regs()
-! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
-! - switch bank
-! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
-! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
-! k2 returns original pr
-! k3 returns original sr
-! k4 returns original stack pointer
-! r8 passes SR bitmask, overwritten with restored data on return
-! r9 trashed
-! BL=0 on entry, on exit BL=1 (depending on r8).
-
-ENTRY(restore_regs)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- !
- stc sr, r9
- or r8, r9
- ldc r9, sr
- !
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, k4 ! original stack pointer
- ldc.l @r15+, spc
- mov.l @r15+, k2 ! original PR
- mov.l @r15+, k3 ! original SR
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
- rts
- add #4, r15 ! Skip syscall number
-
-restore_all:
- mov.l 7f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- !
- ! Calculate new SR value
- mov k3, k2 ! original SR value
- mov #0xfffffff0, k1
- extu.b k1, k1
- not k1, k1
- and k1, k2 ! Mask original SR value
- !
- mov k3, k0 ! Calculate IMASK-bits
- shlr2 k0
- and #0x3c, k0
- cmp/eq #0x3c, k0
- bt/s 6f
- shll2 k0
- mov g_imask, k0
- !
-6: or k0, k2 ! Set the IMASK-bits
- ldc k2, ssr
- !
- mov k4, r15
- rte
- nop
-
- .align 2
-5: .long 0x00001000 ! DSP
-7: .long 0x30000000
-
-! common exception handler
-#include "../../entry-common.S"
-
-! Exception Vector Base
-!
-! Should be aligned page boundary.
-!
- .balign 4096,0,4096
-ENTRY(vbr_base)
- .long 0
-!
-! 0x100: General exception vector
-!
- .balign 256,0,256
-general_exception:
- bra handle_exception
- sts pr, k3 ! save original pr value in k3
-
-! prepare_stack()
-! - roll back gRB
-! - switch to kernel stack
-! k0 returns original sp (after roll back)
-! k1 trashed
-! k2 trashed
-
-prepare_stack:
-#ifdef CONFIG_GUSA
- ! Check for roll back gRB (User and Kernel)
- mov r15, k0
- shll k0
- bf/s 1f
- shll k0
- bf/s 1f
- stc spc, k1
- stc r0_bank, k0
- cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0)
- bt/s 2f
- stc r1_bank, k1
-
- add #-2, k0
- add r15, k0
- ldc k0, spc ! PC = saved r0 + r15 - 2
-2: mov k1, r15 ! SP = r1
-1:
-#endif
- ! Switch to kernel stack if needed
- stc ssr, k0 ! Is it from kernel space?
- shll k0 ! Check MD bit (bit30) by shifting it into...
- shll k0 ! ...the T bit
- bt/s 1f ! It's a kernel to kernel transition.
- mov r15, k0 ! save original stack to k0
- /* User space to kernel */
- mov #(THREAD_SIZE >> 10), k1
- shll8 k1 ! k1 := THREAD_SIZE
- shll2 k1
- add current, k1
- mov k1, r15 ! change to kernel stack
- !
-1:
- rts
- nop
-
-!
-! 0x400: Instruction and Data TLB miss exception vector
-!
- .balign 1024,0,1024
-tlb_miss:
- sts pr, k3 ! save original pr value in k3
-
-handle_exception:
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 5f, k2 ! vector register address
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov.l @k2, k2 ! read out vector and keep in k2
-
-handle_exception_special:
- setup_frame_reg
-
- ! Setup return address and jump to exception handler
- mov.l 7f, r9 ! fetch return address
- stc r2_bank, r0 ! k2 (vector)
- mov.l 6f, r10
- shlr2 r0
- shlr r0
- mov.l @(r0, r10), r10
- jmp @r10
- lds r9, pr ! put return address in pr
-
- .align L1_CACHE_SHIFT
-
-! save_regs()
-! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
-! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
-! - switch bank
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k0 contains original stack pointer*
-! k1 trashed
-! k3 passes original pr*
-! k4 passes SR bitmask
-! BL=1 on entry, on exit BL=0.
-
-ENTRY(save_regs)
- mov #-1, r1
- mov.l k1, @-r15 ! set TRA (default: -1)
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- mov.l k3, @-r15 ! original pr in k3
- stc.l spc, @-r15
-
- mov.l k0, @-r15 ! original stack pointer in k0
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- mov.l 0f, k3 ! SR bits to set in k3
-
- ! fall-through
-
-! save_low_regs()
-! - modify SR for bank switch
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k3 passes bits to set in SR
-! k4 passes bits to clear in SR
-
-ENTRY(save_low_regs)
- stc sr, r8
- or k3, r8
- and k4, r8
- ldc r8, sr
-
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
-!
-! 0x600: Interrupt / NMI vector
-!
- .balign 512,0,512
-ENTRY(handle_interrupt)
- sts pr, k3 ! save original pr value in k3
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov #-1, k2 ! default vector kept in k2
-
- setup_frame_reg
-
- stc sr, r0 ! get status register
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bf 9f
- TRACE_IRQS_OFF
-9:
-
- ! Setup return address and jump to do_IRQ
- mov.l 4f, r9 ! fetch return address
- lds r9, pr ! put return address in pr
- mov.l 2f, r4
- mov.l 3f, r9
- mov.l @r4, r4 ! pass INTEVT vector as arg0
-
- shlr2 r4
- shlr r4
- mov r4, r0 ! save vector->jmp table offset for later
-
- shlr2 r4 ! vector to IRQ# conversion
- add #-0x10, r4
-
- cmp/pz r4 ! is it a valid IRQ?
- bt 10f
-
- /*
- * We got here as a result of taking the INTEVT path for something
- * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
- * path and special case the event dispatch instead. This is the
- * expected path for the NMI (and any other brilliantly implemented
- * exception), which effectively wants regular exception dispatch
- * but is unfortunately reported through INTEVT rather than
- * EXPEVT. Grr.
- */
- mov.l 6f, r9
- mov.l @(r0, r9), r9
- jmp @r9
- mov r15, r8 ! trap handlers take saved regs in r8
-
-10:
- jmp @r9 ! Off to do_IRQ() we go.
- mov r15, r5 ! pass saved registers as arg1
-
-ENTRY(exception_none)
- rts
- nop
-
- .align L1_CACHE_SHIFT
-exception_data:
-0: .long 0x000080f0 ! FD=1, IMASK=15
-1: .long 0xcfffffff ! RB=0, BL=0
-2: .long INTEVT
-3: .long do_IRQ
-4: .long ret_from_irq
-5: .long EXPEVT
-6: .long exception_handling_table
-7: .long ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
deleted file mode 100644
index ee2113f4215cb3..00000000000000
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/ex.S
- *
- * The SH-3 and SH-4 exception vector table.
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_MMU)
-#define tlb_miss_load exception_error
-#define tlb_miss_store exception_error
-#define initial_page_write exception_error
-#define tlb_protection_violation_load exception_error
-#define tlb_protection_violation_store exception_error
-#define address_error_load exception_error
-#define address_error_store exception_error
-#endif
-
-#if !defined(CONFIG_SH_FPU)
-#define fpu_error_trap_handler exception_error
-#endif
-
-#if !defined(CONFIG_KGDB)
-#define kgdb_handle_exception exception_error
-#endif
-
- .align 2
- .data
-
-ENTRY(exception_handling_table)
- .long exception_error /* 000 */
- .long exception_error
- .long tlb_miss_load /* 040 */
- .long tlb_miss_store
- .long initial_page_write
- .long tlb_protection_violation_load
- .long tlb_protection_violation_store
- .long address_error_load
- .long address_error_store /* 100 */
- .long fpu_error_trap_handler /* 120 */
- .long exception_error /* 140 */
- .long system_call ! Unconditional Trap /* 160 */
- .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */
- .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
- .long nmi_trap_handler /* 1C0 */ ! Allow trap to debugger
- .long breakpoint_trap_handler /* 1E0 */
-
- /*
- * Pad the remainder of the table out, exceptions residing in far
- * away offsets can be manually inserted in to their appropriate
- * location via set_exception_table_{evt,vec}().
- */
- .balign 4096,0,4096
diff --git a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c b/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
deleted file mode 100644
index 34015e608ee931..00000000000000
--- a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7720_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7720", sh7720_pfc_resources,
- ARRAY_SIZE(sh7720_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
deleted file mode 100644
index 5e7ad591ab1651..00000000000000
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/probe.c
- *
- * CPU Subtype Probing for SH-3.
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-void cpu_probe(void)
-{
- unsigned long addr0, addr1, data0, data1, data2, data3;
-
- jump_to_uncached();
- /*
- * Check if the entry shadows or not.
- * When shadowed, it's 128-entry system.
- * Otherwise, it's 256-entry system.
- */
- addr0 = CACHE_OC_ADDRESS_ARRAY + (3 << 12);
- addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
-
- /* First, write back & invalidate */
- data0 = __raw_readl(addr0);
- __raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
- data1 = __raw_readl(addr1);
- __raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
-
- /* Next, check if there's shadow or not */
- data0 = __raw_readl(addr0);
- data0 ^= SH_CACHE_VALID;
- __raw_writel(data0, addr0);
- data1 = __raw_readl(addr1);
- data2 = data1 ^ SH_CACHE_VALID;
- __raw_writel(data2, addr1);
- data3 = __raw_readl(addr0);
-
- /* Lastly, invaliate them. */
- __raw_writel(data0&~SH_CACHE_VALID, addr0);
- __raw_writel(data2&~SH_CACHE_VALID, addr1);
-
- back_to_cached();
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * 7709A/7729 has 16K cache (256-entry), while 7702 has only
- * 2K(direct) 7702 is not supported (yet)
- */
- if (data0 == data1 && data2 == data3) { /* Shadow */
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.entry_mask = 0x7f0;
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.type = CPU_SH7708;
-
- boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
- } else { /* 7709A or 7729 */
- boot_cpu_data.dcache.way_incr = (1 << 12);
- boot_cpu_data.dcache.entry_mask = 0xff0;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.type = CPU_SH7729;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7706)
- boot_cpu_data.type = CPU_SH7706;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
- boot_cpu_data.type = CPU_SH7710;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7712)
- boot_cpu_data.type = CPU_SH7712;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- boot_cpu_data.type = CPU_SH7720;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7721)
- boot_cpu_data.type = CPU_SH7721;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- boot_cpu_data.type = CPU_SH7705;
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
- boot_cpu_data.dcache.way_incr = (1 << 13);
- boot_cpu_data.dcache.entry_mask = 0x1ff0;
- boot_cpu_data.dcache.sets = 512;
- __raw_writel(CCR_CACHE_32KB, CCR3_REG);
-#else
- __raw_writel(CCR_CACHE_16KB, CCR3_REG);
-#endif
-#endif
- }
-
- /*
- * SH-3 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
- boot_cpu_data.icache = boot_cpu_data.dcache;
-
- boot_cpu_data.family = CPU_FAMILY_SH3;
-}
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/arch/sh/kernel/cpu/sh3/serial-sh770x.c
deleted file mode 100644
index dec027f233f22e..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh770x.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define SCPCR 0xA4000116
-#define SCPDR 0xA4000136
-
-static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- __raw_writew(data & 0x0fcf, SCPCR);
-
- if (!(cflag & CRTSCTS)) {
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP4MD1,0,
- Set SCP6MD1,0 = {01} (output) */
- __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
-
- data = __raw_readb(SCPDR);
- /* Set /RTS2 (bit6) = 0 */
- __raw_writeb(data & 0xbf, SCPDR);
- }
-}
-
-struct plat_sci_port_ops sh770x_sci_port_ops = {
- .init_pins = sh770x_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/arch/sh/kernel/cpu/sh3/serial-sh7710.c
deleted file mode 100644
index ee04052e5bdde2..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7710.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define PACR 0xa4050100
-#define PBCR 0xa4050102
-
-static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- if (port->mapbase == 0xA4400000) {
- __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
- __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
- } else if (port->mapbase == 0xA4410000)
- __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
-}
-
-struct plat_sci_port_ops sh7710_sci_port_ops = {
- .init_pins = sh7710_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
deleted file mode 100644
index 75aaea49de4317..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-#include <cpu/gpio.h>
-
-static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (cflag & CRTSCTS) {
- /* enable RTS/CTS */
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xfc03), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 9-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xfc03), PORT_PVCR);
- }
- } else {
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 5-2; enable only tx and rx */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xffc3), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 5-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xffc3), PORT_PVCR);
- }
- }
-}
-
-struct plat_sci_port_ops sh7720_sci_port_ops = {
- .init_pins = sh7720_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
deleted file mode 100644
index cf2a3f09fee443..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared SH3 Setup code
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-};
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static struct intc_vect vectors_irq45[] __initdata = {
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4000004, 0, 8, /* IRR0 */
- { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
- vectors_irq0123, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
- vectors_irq45, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR1_IRQLVL (1<<14)
-
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
- __raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
- register_intc_controller(&intc_desc_irq0123);
- return;
- }
- BUG();
-}
-
-void __init plat_irq_setup_sh3(void)
-{
- register_intc_controller(&intc_desc_irq45);
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
deleted file mode 100644
index 0544134b3f20c6..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7705 Setup
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
-
- DMAC, SCIF0, SCIF2, ADC_ADI, USB,
-
- TPU0, TPU1, TPU2, TPU3,
- TMU0, TMU1, TMU2,
-
- RTC, WDT, REF_RCMI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x960),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
- INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
- INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } },
-
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7705_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7705_devices_setup(void)
-{
- return platform_add_devices(sh7705_devices,
- ARRAY_SIZE(sh7705_devices));
-}
-arch_initcall(sh7705_devices_setup);
-
-static struct platform_device *sh7705_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7705_early_devices,
- ARRAY_SIZE(sh7705_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
deleted file mode 100644
index 4947f57748bc12..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on setup-sh7709.c
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
- DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
- LCDC, PCC0, PCC1,
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
- INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
- INTC_VECT(REF, 0x5a0),
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- INTC_VECT(LCDC, 0x9a0),
- INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0),
-#endif
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } },
-#endif
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCI,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffffe80, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH3_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4000150, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif2_platform_data = {
- .type = PORT_IRDA,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xa4000140, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-#endif
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh770x_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh770x_devices_setup(void)
-{
- return platform_add_devices(sh770x_devices,
- ARRAY_SIZE(sh770x_devices));
-}
-arch_initcall(sh770x_devices_setup);
-
-static struct platform_device *sh770x_early_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh770x_early_devices,
- ARRAY_SIZE(sh770x_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- plat_irq_setup_sh3();
-#endif
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
deleted file mode 100644
index 3819107615794b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7710, SH7712
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
- EDMAC0, EDMAC1, EDMAC2,
- SIOF0, SIOF1,
-
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
- INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
-#ifdef CONFIG_CPU_SUBTYPE_SH7710
- INTC_VECT(IPSEC, 0xbe0),
-#endif
- INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
- INTC_VECT(EDMAC2, 0xc40),
- INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
- INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
- INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
- INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
- { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7710_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7710_devices_setup(void)
-{
- return platform_add_devices(sh7710_devices,
- ARRAY_SIZE(sh7710_devices));
-}
-arch_initcall(sh7710_devices_setup);
-
-static struct platform_device *sh7710_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7710_early_devices,
- ARRAY_SIZE(sh7710_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
deleted file mode 100644
index 425d067dae9baf..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup code for SH7720, SH7721.
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-#include <cpu/serial.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x28 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4430000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4438000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xA4428000,
- .end = 0xA44280FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa60),
- .end = evt2irq(0xa60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "sh_udc",
- .start = 0xA4420000,
- .end = 0xA44200FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "sh_udc",
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x1f,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x60),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7720_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7720_devices_setup(void)
-{
- return platform_add_devices(sh7720_devices,
- ARRAY_SIZE(sh7720_devices));
-}
-arch_initcall(sh7720_devices_setup);
-
-static struct platform_device *sh7720_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7720_early_devices,
- ARRAY_SIZE(sh7720_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- TMU0, TMU1, TMU2, RTC,
- WDT, REF_RCMI, SIM,
- IRQ0, IRQ1, IRQ2, IRQ3,
- USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
- DMAC1, LCDC, SSL,
- ADC, DMAC2, USBFI, CMT,
- SCIF0, SCIF1,
- PINT07, PINT815, TPU, IIC,
- SIOF0, SIOF1, MMC, PCC,
- USBHI, AFEIF,
- H_UDI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480),
- INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500),
- INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540),
- INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
- /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
- INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800),
- INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840),
- INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900),
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- INTC_VECT(SSL, 0x980),
-#endif
- INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40),
- INTC_VECT(USBHI, 0xa60),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
- INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
- INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
- INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
- INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80),
- INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0),
- INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00),
- INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0),
- INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
- INTC_VECT(AFEIF, 0xfe0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
- { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
- { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
- { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
- { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
- { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
- { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
- { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S
deleted file mode 100644
index dc111c4ccf2199..00000000000000
--- a/arch/sh/kernel/cpu/sh3/swsusp.S
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/swsusp.S
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-! swsusp_arch_resume()
-! - copy restore_pblist pages
-! - restore registers from swsusp_arch_regs_cpu0
-
-ENTRY(swsusp_arch_resume)
- mov.l 1f, r15
- mov.l 2f, r4
- mov.l @r4, r4
-
-swsusp_copy_loop:
- mov r4, r0
- cmp/eq #0, r0
- bt swsusp_restore_regs
-
- mov.l @(PBE_ADDRESS, r4), r2
- mov.l @(PBE_ORIG_ADDRESS, r4), r5
-
- mov #(PAGE_SIZE >> 10), r3
- shll8 r3
- shlr2 r3 /* PAGE_SIZE / 16 */
-swsusp_copy_page:
- dt r3
- mov.l @r2+,r1 /* 16n+0 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+4 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+8 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+12 */
- mov.l r1,@r5
- bf/s swsusp_copy_page
- add #4,r5
-
- bra swsusp_copy_loop
- mov.l @(PBE_NEXT, r4), r4
-
-swsusp_restore_regs:
- ! BL=0: R7->R0 is bank0
- mov.l 3f, r8
- mov.l 4f, r5
- jsr @r5
- nop
-
- ! BL=1: R7->R0 is bank1
- lds k2, pr
- ldc k3, ssr
-
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- rte
- nop
- ! BL=0: R7->R0 is bank0
-
- .align 2
-1: .long swsusp_arch_regs_cpu0
-2: .long restore_pblist
-3: .long 0x20000000 ! RB=1
-4: .long restore_regs
-
-! swsusp_arch_suspend()
-! - prepare pc for resume, return from function without swsusp_save on resume
-! - save registers in swsusp_arch_regs_cpu0
-! - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
- sts pr, r0 ! save pr in r0
- mov r15, r2 ! save sp in r2
- mov r8, r5 ! save r8 in r5
- stc sr, r1
- ldc r1, ssr ! save sr in ssr
- mov.l 1f, r1
- ldc r1, spc ! setup pc value for resuming
- mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
- mov.l 6f, r3
- add r3, r15 ! save from top of structure
-
- ! BL=0: R7->R0 is bank0
- mov.l 2f, r3 ! get new SR value for bank1
- mov #0, r4
- mov.l 7f, r1
- jsr @r1 ! switch to bank1 and save bank1 r7->r0
- not r4, r4
-
- ! BL=1: R7->R0 is bank1
- stc r2_bank, k0 ! fetch old sp from r2_bank0
- mov.l 3f, k4 ! SR bits to clear in k4
- mov.l 8f, k1
- jsr @k1 ! switch to bank0 and save all regs
- stc r0_bank, k3 ! fetch old pr from r0_bank0
-
- ! BL=0: R7->R0 is bank0
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- stc ssr, r1
- ldc r1, sr ! restore old sr
- lds r0, pr ! restore old pr
- mov.l 4f, r0
- jmp @r0
- nop
-
-swsusp_call_save:
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- lds r0, pr ! restore old pr
- rts
- mov #0, r0
-
- .align 2
-1: .long swsusp_call_save
-2: .long 0x20000000 ! RB=1
-3: .long 0xdfffffff ! RB=0
-4: .long swsusp_save
-5: .long swsusp_arch_regs_cpu0
-6: .long SWSUSP_ARCH_REGS_SIZE
-7: .long save_low_regs
-8: .long save_regs
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
deleted file mode 100644
index 00c16331e07e5b..00000000000000
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-obj-y := probe.o common.o
-common-y += $(addprefix ../sh3/, entry.o ex.o)
-
-obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
-obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
-obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
-
-# Perf events
-perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
-
-# Primary on-chip clocks (common)
-ifndef CONFIG_CPU_SH4A
-clock-$(CONFIG_CPU_SH4) := clock-sh4.o
-endif
-
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763cb256..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3 0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
- int divisor = clk->parent->rate / rate;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
- if (frqcr3_divisors[i] == divisor)
- return frqcr3_values[i];
-
- /* Safe fallback */
- return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
- .recalc = emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
- .recalc = femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
- int i;
-
- /*
- * For some reason, the shoc_clk seems to be set to some really
- * insane value at boot (values outside of the allowable frequency
- * range for instance). We deal with this by scaling it back down
- * to something sensible just in case.
- *
- * Start scaling from the high end down until we find something
- * that passes rate verification..
- */
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
- int divisor = frqcr3_divisors[i];
-
- if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
- break;
- }
-
- WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *bclk = clk_get(NULL, "bus_clk");
- unsigned long bclk_rate = clk_get_rate(bclk);
-
- clk_put(bclk);
-
- if (rate > bclk_rate)
- return 1;
- if (rate > 66000000)
- return 1;
-
- return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long frqcr3;
- unsigned int tmp;
-
- /* Make sure we have something sensible to switch to */
- if (shoc_clk_verify_rate(clk, rate) != 0)
- return -EINVAL;
-
- tmp = frqcr3_lookup(clk, rate);
-
- frqcr3 = __raw_readl(CPG2_FRQCR3);
- frqcr3 &= ~(0x0007 << 6);
- frqcr3 |= tmp << 6;
- __raw_writel(frqcr3, CPG2_FRQCR3);
-
- clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
- return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
- .init = shoc_clk_init,
- .recalc = shoc_clk_recalc,
- .set_rate = shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
- &sh4202_emi_clk,
- &sh4202_femi_clk,
- &sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
- CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
- CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
- struct clk *clkp = sh4202_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
deleted file mode 100644
index ee3c5537a9d81a..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4.c
- *
- * Generic SH-4 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-#define bfc_divisors ifc_divisors /* Same */
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh4_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh4_clk_ops[] = {
- &sh4_master_clk_ops,
- &sh4_module_clk_ops,
- &sh4_bus_clk_ops,
- &sh4_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh4_clk_ops))
- *ops = sh4_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
deleted file mode 100644
index 03ffd8cdf54244..00000000000000
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2006 ST Microelectronics Ltd. (denorm support)
- *
- * FIXME! These routines have not been tested for big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/io.h>
-#include <cpu/fpu.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-extern unsigned long long float64_div(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_div(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_mul(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_mul(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_add(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_add(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_sub(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_sub(unsigned long int a, unsigned long int b);
-extern unsigned long int float64_to_float32(unsigned long long a);
-static unsigned int fpu_exception_flags;
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "lds %2, fpscr\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t":"=r" (dummy)
- :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r"(FPSCR_RCHG), "r"(FPSCR_INIT)
- :"memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("lds %2, fpscr\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- :"=r" (dummy)
- :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- :"memory");
- disable_fpu();
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n + 1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *)regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf
- };
-
- if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb))
- regs->pr = regs->pc + 4; /* bsr & jsr */
-
- if (nib[0] == 0xa || nib[0] == 0xb) {
- /* bra & bsr */
- nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) {
- /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) {
- /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (insn == 0x000b) {
- /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else {
- nextpc = regs->pc + instruction_size(insn);
- finsn = insn;
- }
-
- if ((finsn & 0xf1ff) == 0xf0ad) {
- /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
- /* FPU error */
- denormal_to_double(&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) {
- /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- llx = float64_mul(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_mul(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) {
- /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = float64_add(llx, lly);
- else
- llx = float64_sub(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- if ((finsn & 0xf00f) == 0xf000)
- hx = float32_add(hx, hy);
- else
- hx = float32_sub(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf003) == 0xf003) {
- /* fdiv */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- llx = float64_div(llx, lly);
-
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_div(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf0bd) == 0xf0bd) {
- /* fcnvds - double to single precision convert */
- struct task_struct *tsk = current;
- int m;
- unsigned int hx;
-
- m = (finsn >> 8) & 0x7;
- hx = tsk->thread.xstate->hardfpu.fp_regs[m];
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
- && ((hx & 0x7fffffff) < 0x00100000)) {
- /* subnormal double to float conversion */
- long long llx;
-
- llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-void float_raise(unsigned int flags)
-{
- fpu_exception_flags |= flags;
-}
-
-int float_rounding_mode(void)
-{
- struct task_struct *tsk = current;
- int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
- return roundingMode;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- fpu_exception_flags = 0;
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
- /* Set the FPSCR flag as well as cause bits - simply
- * replicate the cause */
- tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
- (fpu_exception_flags >> 2)) == 0) {
- return;
- }
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
deleted file mode 100644
index db5847bb733069..00000000000000
--- a/arch/sh/kernel/cpu/sh4/perf_event.c
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH7750-style performance counters
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PM_CR_BASE 0xff000084 /* 16-bit */
-#define PM_CTR_BASE 0xff100004 /* 32-bit */
-
-#define PMCR(n) (PM_CR_BASE + ((n) * 0x04))
-#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08))
-#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08))
-
-#define PMCR_PMM_MASK 0x0000003f
-
-#define PMCR_CLKF 0x00000100
-#define PMCR_PMCLR 0x00002000
-#define PMCR_PMST 0x00004000
-#define PMCR_PMEN 0x00008000
-
-static struct sh_pmu sh7750_pmu;
-
-/*
- * There are a number of events supported by each counter (33 in total).
- * Since we have 2 counters, each counter will take the event code as it
- * corresponds to the PMCR PMM setting. Each counter can be configured
- * independently.
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x01 Operand read access
- * 0x02 Operand write access
- * 0x03 UTLB miss
- * 0x04 Operand cache read miss
- * 0x05 Operand cache write miss
- * 0x06 Instruction fetch (w/ cache)
- * 0x07 Instruction TLB miss
- * 0x08 Instruction cache miss
- * 0x09 All operand accesses
- * 0x0a All instruction accesses
- * 0x0b OC RAM operand access
- * 0x0d On-chip I/O space access
- * 0x0e Operand access (r/w)
- * 0x0f Operand cache miss (r/w)
- * 0x10 Branch instruction
- * 0x11 Branch taken
- * 0x12 BSR/BSRF/JSR
- * 0x13 Instruction execution
- * 0x14 Instruction execution in parallel
- * 0x15 FPU Instruction execution
- * 0x16 Interrupt
- * 0x17 NMI
- * 0x18 trapa instruction execution
- * 0x19 UBCA match
- * 0x1a UBCB match
- * 0x21 Instruction cache fill
- * 0x22 Operand cache fill
- * 0x23 Elapsed time
- * 0x24 Pipeline freeze by I-cache miss
- * 0x25 Pipeline freeze by D-cache miss
- * 0x27 Pipeline freeze by branch instruction
- * 0x28 Pipeline freeze by CPU register
- * 0x29 Pipeline freeze by FPU
- */
-
-static const int sh7750_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0023,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x000a,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0006, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x0008, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0010,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh7750_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0001,
- [ C(RESULT_MISS) ] = 0x0004,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0002,
- [ C(RESULT_MISS) ] = 0x0005,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0006,
- [ C(RESULT_MISS) ] = 0x0008,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0003,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0007,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh7750_event_map(int event)
-{
- return sh7750_general_events[event];
-}
-
-static u64 sh7750_pmu_read(int idx)
-{
- return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
- __raw_readl(PMCTRL(idx));
-}
-
-static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readw(PMCR(idx));
- tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
- __raw_writew(tmp, PMCR(idx));
-}
-
-static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- __raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
- __raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
-}
-
-static void sh7750_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
-}
-
-static void sh7750_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
-}
-
-static struct sh_pmu sh7750_pmu = {
- .name = "sh7750",
- .num_events = 2,
- .event_map = sh7750_event_map,
- .max_events = ARRAY_SIZE(sh7750_general_events),
- .raw_event_mask = PMCR_PMM_MASK,
- .cache_events = &sh7750_cache_events,
- .read = sh7750_pmu_read,
- .disable = sh7750_pmu_disable,
- .enable = sh7750_pmu_enable,
- .disable_all = sh7750_pmu_disable_all,
- .enable_all = sh7750_pmu_enable_all,
-};
-
-static int __init sh7750_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh7750_pmu);
-}
-early_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
deleted file mode 100644
index ef4dd6295263dd..00000000000000
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ /dev/null
@@ -1,260 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/probe.c
- *
- * CPU Subtype Probing for SH-4.
- *
- * Copyright (C) 2001 - 2007 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- unsigned long pvr, prr, cvr;
- unsigned long size;
-
- static unsigned long sizes[16] = {
- [1] = (1 << 12),
- [2] = (1 << 13),
- [4] = (1 << 14),
- [8] = (1 << 15),
- [9] = (1 << 16)
- };
-
- pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
- prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
- cvr = (__raw_readl(CCN_CVR));
-
- /*
- * Setup some sane SH-4 defaults for the icache
- */
- boot_cpu_data.icache.way_incr = (1 << 13);
- boot_cpu_data.icache.entry_shift = 5;
- boot_cpu_data.icache.sets = 256;
- boot_cpu_data.icache.ways = 1;
- boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
-
- /*
- * And again for the dcache ..
- */
- boot_cpu_data.dcache.way_incr = (1 << 14);
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.sets = 512;
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
-
- /* We don't know the chip cut */
- boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
-
- /*
- * Setup some generic flags we can probe on SH-4A parts
- */
- if (((pvr >> 16) & 0xff) == 0x10) {
- boot_cpu_data.family = CPU_FAMILY_SH4A;
-
- if ((cvr & 0x10000000) == 0) {
- boot_cpu_data.flags |= CPU_HAS_DSP;
- boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
- }
-
- boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
- boot_cpu_data.cut_major = pvr & 0x7f;
-
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- } else {
- /* And some SH-4 defaults.. */
- boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
- boot_cpu_data.family = CPU_FAMILY_SH4;
- }
-
- /* FPU detection works for almost everyone */
- if ((cvr & 0x20000000))
- boot_cpu_data.flags |= CPU_HAS_FPU;
-
- /* Mask off the upper chip ID */
- pvr &= 0xffff;
-
- /*
- * Probe the underlying processor version/revision and
- * adjust cpu_data setup accordingly.
- */
- switch (pvr) {
- case 0x205:
- boot_cpu_data.type = CPU_SH7750;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x206:
- boot_cpu_data.type = CPU_SH7750S;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x1100:
- boot_cpu_data.type = CPU_SH7751;
- break;
- case 0x2001:
- case 0x2004:
- boot_cpu_data.type = CPU_SH7770;
- break;
- case 0x2006:
- case 0x200A:
- if (prr == 0x61)
- boot_cpu_data.type = CPU_SH7781;
- else if (prr == 0xa1)
- boot_cpu_data.type = CPU_SH7763;
- else
- boot_cpu_data.type = CPU_SH7780;
-
- break;
- case 0x3000:
- case 0x3003:
- case 0x3009:
- boot_cpu_data.type = CPU_SH7343;
- break;
- case 0x3004:
- case 0x3007:
- boot_cpu_data.type = CPU_SH7785;
- break;
- case 0x4004:
- case 0x4005:
- boot_cpu_data.type = CPU_SH7786;
- boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
- break;
- case 0x3008:
- switch (prr) {
- case 0x50:
- case 0x51:
- boot_cpu_data.type = CPU_SH7723;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x70:
- boot_cpu_data.type = CPU_SH7366;
- break;
- case 0xa0:
- case 0xa1:
- boot_cpu_data.type = CPU_SH7722;
- break;
- }
- break;
- case 0x300b:
- switch (prr) {
- case 0x20:
- boot_cpu_data.type = CPU_SH7724;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x10:
- case 0x11:
- boot_cpu_data.type = CPU_SH7757;
- break;
- case 0xd0:
- case 0x40: /* yon-ten-go */
- boot_cpu_data.type = CPU_SH7372;
- break;
- case 0xE0: /* 0x4E0 */
- boot_cpu_data.type = CPU_SH7734; /* SH7733/SH7734 */
- break;
-
- }
- break;
- case 0x4000: /* 1st cut */
- case 0x4001: /* 2nd cut */
- boot_cpu_data.type = CPU_SHX3;
- break;
- case 0x700:
- boot_cpu_data.type = CPU_SH4_501;
- boot_cpu_data.flags &= ~CPU_HAS_FPU;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x600:
- boot_cpu_data.type = CPU_SH4_202;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x500 ... 0x501:
- switch (prr) {
- case 0x10:
- boot_cpu_data.type = CPU_SH7750R;
- break;
- case 0x11:
- boot_cpu_data.type = CPU_SH7751R;
- break;
- case 0x50 ... 0x5f:
- boot_cpu_data.type = CPU_SH7760;
- break;
- }
-
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
-
- break;
- }
-
- /*
- * On anything that's not a direct-mapped cache, look to the CVR
- * for I/D-cache specifics.
- */
- if (boot_cpu_data.icache.ways > 1) {
- size = sizes[(cvr >> 20) & 0xf];
- boot_cpu_data.icache.way_incr = (size >> 1);
- boot_cpu_data.icache.sets = (size >> 6);
-
- }
-
- /* And the rest of the D-cache */
- if (boot_cpu_data.dcache.ways > 1) {
- size = sizes[(cvr >> 16) & 0xf];
- boot_cpu_data.dcache.way_incr = (size >> 1);
- boot_cpu_data.dcache.sets = (size >> 6);
- }
-
- /*
- * SH-4A's have an optional PIPT L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- /*
- * Verify that it really has something hooked up, this
- * is the safety net for CPUs that have optional L2
- * support yet do not implement it.
- */
- if ((cvr & 0xf) == 0)
- boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
- else {
- /*
- * Silicon and specifications have clearly never
- * met..
- */
- cvr ^= 0xf;
-
- /*
- * Size calculation is much more sensible
- * than it is for the L1.
- *
- * Sizes are 128KB, 256KB, 512KB, and 1MB.
- */
- size = (cvr & 0xf) << 17;
-
- boot_cpu_data.scache.way_incr = (1 << 16);
- boot_cpu_data.scache.entry_shift = 5;
- boot_cpu_data.scache.ways = 4;
- boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
-
- boot_cpu_data.scache.entry_mask =
- (boot_cpu_data.scache.way_incr -
- boot_cpu_data.scache.linesz);
-
- boot_cpu_data.scache.sets = size /
- (boot_cpu_data.scache.linesz *
- boot_cpu_data.scache.ways);
-
- boot_cpu_data.scache.way_size =
- (boot_cpu_data.scache.sets *
- boot_cpu_data.scache.linesz);
- }
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index e6737f3d0df252..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
- return platform_add_devices(sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh4202_early_devices,
- ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
deleted file mode 100644
index 19c8f1d69071c3..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <generated/machtypes.h>
-#include <asm/platform_early.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffc80000,
- .end = 0xffc80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port sci_platform_data = {
- .type = PORT_SCI,
-};
-
-static struct resource sci_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = sci_resources,
- .num_resources = ARRAY_SIZE(sci_resources),
- .dev = {
- .platform_data = &sci_platform_data,
- },
-};
-
-static struct plat_sci_port scif_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif_resources,
- .num_resources = ARRAY_SIZE(scif_resources),
- .dev = {
- .platform_data = &scif_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xfe100000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-#endif
-
-static struct platform_device *sh7750_devices[] __initdata = {
- &rtc_device,
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-static int __init sh7750_devices_setup(void)
-{
- if (mach_is_rts7751r2d()) {
- platform_device_register(&scif_device);
- } else {
- platform_device_register(&sci_device);
- platform_device_register(&scif_device);
- }
-
- return platform_add_devices(sh7750_devices,
- ARRAY_SIZE(sh7750_devices));
-}
-arch_initcall(sh7750_devices_setup);
-
-static struct platform_device *sh7750_early_devices[] __initdata = {
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-void __init plat_early_device_setup(void)
-{
- struct platform_device *dev[1];
-
- if (mach_is_rts7751r2d()) {
- scif_platform_data.scscr |= SCSCR_CKE1;
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- } else {
- dev[0] = &sci_device;
- sh_early_platform_add_devices(dev, 1);
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- }
-
- sh_early_platform_add_devices(sh7750_early_devices,
- ARRAY_SIZE(sh7750_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, GPIOI, DMAC,
- PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
- TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
-
- /* interrupt groups */
- PCIC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
- INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
- TMU4, TMU3,
- PCIC1, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-static struct intc_vect vectors_dma4[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
- vectors_dma4, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R and SH7751R both have 8-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_dma8[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
- vectors_dma8, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_tmu34[] __initdata = {
- INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, TMU4, TMU3,
- PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2,
- PCIC1_PCIDMA3, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34",
- vectors_tmu34, NULL,
- mask_registers, prio_registers, NULL);
-#endif
-
-/* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7751 and SH7751R both have PCI */
-#if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_pci[] __initdata = {
- INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0),
- INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0),
- INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60),
- INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20),
-};
-
-static struct intc_group groups_pci[] __initdata = {
- INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3),
-};
-
-static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci,
- mask_registers, prio_registers, NULL);
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-void __init plat_irq_setup(void)
-{
- /*
- * same vectors for SH7750, SH7750S and SH7091 except for IRLM,
- * see below..
- */
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091)
- BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */
- return;
-#endif
-
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
deleted file mode 100644
index 14212f5d803cd4..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3,
- HUDI, GPIOI, DMAC,
- IRQ4, IRQ5, IRQ6, IRQ7,
- HCAN20, HCAN21,
- SSI0, SSI1,
- HAC0, HAC1,
- I2C0, I2C1,
- USB, LCDC,
- DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI,
- MMCIF0, MMCIF1, MMCIF2, MMCIF3,
- MFI, ADC, CMT,
- TMU0, TMU1, TMU2,
- WDT, REF,
-
- /* interrupt groups */
- DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
- INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
- INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
- INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960),
- INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0),
- INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0),
- INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20),
- INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0),
- INTC_VECT(DMABRG2, 0xac0),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
- INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20),
- INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60),
- INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0),
- INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0),
- INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20),
- INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60),
- INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20),
- INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60),
- INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
- INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21,
- SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC,
- 0, DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } },
- { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI, MMCIF0, MMCIF1, MMCIF2,
- MMCIF3, 0, 0, 0, 0, 0, 0, 0,
- 0, MFI, 0, 0, 0, 0, ADC, CMT, } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1,
- HAC0, HAC1, I2C0, I2C1 } },
- { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0,
- SCIF1, SCIF2, SIM, HSPI } },
- { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0,
- MFI, 0, ADC, CMT } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfe600000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .scscr = SCSCR_REIE,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfe610000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb20)),
- DEFINE_RES_IRQ(evt2irq(0xb60)),
- DEFINE_RES_IRQ(evt2irq(0xb40)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe620000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
- DEFINE_RES_IRQ(evt2irq(0xba0)),
- DEFINE_RES_IRQ(evt2irq(0xbe0)),
- DEFINE_RES_IRQ(evt2irq(0xbc0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- /*
- * This is actually a SIM card module serial port, based on an SCI with
- * additional registers. The sh-sci driver doesn't support the SIM port
- * type, declare it as a SCI. Don't declare the additional registers in
- * the memory resource or the driver will compute an incorrect regshift
- * value.
- */
- .type = PORT_SCI,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe480000, 0x10),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-
-static struct platform_device *sh7760_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-static int __init sh7760_devices_setup(void)
-{
- return platform_add_devices(sh7760_devices,
- ARRAY_SIZE(sh7760_devices));
-}
-arch_initcall(sh7760_devices_setup);
-
-static struct platform_device *sh7760_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7760_early_devices,
- ARRAY_SIZE(sh7760_early_devices));
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1 << 7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irq);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
deleted file mode 100644
index 42edf2e54e8543..00000000000000
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ /dev/null
@@ -1,930 +0,0 @@
-/*
- * Floating point emulation support for subnormalised numbers on SH4
- * architecture This file is derived from the SoftFloat IEC/IEEE
- * Floating-point Arithmetic Package, Release 2 the original license of
- * which is reproduced below.
- *
- * ========================================================================
- *
- * This C source file is part of the SoftFloat IEC/IEEE Floating-point
- * Arithmetic Package, Release 2.
- *
- * Written by John R. Hauser. This work was made possible in part by the
- * International Computer Science Institute, located at Suite 600, 1947 Center
- * Street, Berkeley, California 94704. Funding was partially provided by the
- * National Science Foundation under grant MIP-9311980. The original version
- * of this code was written as part of a project to build a fixed-point vector
- * processor in collaboration with the University of California at Berkeley,
- * overseen by Profs. Nelson Morgan and John Wawrzynek. More information
- * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
- * arithmetic/softfloat.html'.
- *
- * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
- * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
- * TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
- * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
- * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
- *
- * Derivative works are acceptable, even for commercial purposes, so long as
- * (1) they include prominent notice that the work is derivative, and (2) they
- * include prominent notice akin to these three paragraphs for those parts of
- * this code that are retained.
- *
- * ========================================================================
- *
- * SH4 modifications by Ismail Dhaoui <ismail.dhaoui@st.com>
- * and Kamel Khelifi <kamel.khelifi@st.com>
- */
-#include <linux/kernel.h>
-#include <cpu/fpu.h>
-#include <asm/div64.h>
-
-#define LIT64( a ) a##LL
-
-typedef char flag;
-typedef unsigned char uint8;
-typedef signed char int8;
-typedef int uint16;
-typedef int int16;
-typedef unsigned int uint32;
-typedef signed int int32;
-
-typedef unsigned long long int bits64;
-typedef signed long long int sbits64;
-
-typedef unsigned char bits8;
-typedef signed char sbits8;
-typedef unsigned short int bits16;
-typedef signed short int sbits16;
-typedef unsigned int bits32;
-typedef signed int sbits32;
-
-typedef unsigned long long int uint64;
-typedef signed long long int int64;
-
-typedef unsigned long int float32;
-typedef unsigned long long float64;
-
-extern void float_raise(unsigned int flags); /* in fpu.c */
-extern int float_rounding_mode(void); /* in fpu.c */
-
-bits64 extractFloat64Frac(float64 a);
-flag extractFloat64Sign(float64 a);
-int16 extractFloat64Exp(float64 a);
-int16 extractFloat32Exp(float32 a);
-flag extractFloat32Sign(float32 a);
-bits32 extractFloat32Frac(float32 a);
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
-float64 float64_sub(float64 a, float64 b);
-float32 float32_sub(float32 a, float32 b);
-float32 float32_add(float32 a, float32 b);
-float64 float64_add(float64 a, float64 b);
-float64 float64_div(float64 a, float64 b);
-float32 float32_div(float32 a, float32 b);
-float32 float32_mul(float32 a, float32 b);
-float64 float64_mul(float64 a, float64 b);
-float32 float64_to_float32(float64 a);
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
-
-static int8 countLeadingZeros32(bits32 a);
-static int8 countLeadingZeros64(bits64 a);
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp,
- bits64 zSig);
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign);
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign);
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig);
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp,
- bits32 zSig);
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig);
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign);
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign);
-static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr,
- bits64 * zSigPtr);
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b);
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr);
-
-bits64 extractFloat64Frac(float64 a)
-{
- return a & LIT64(0x000FFFFFFFFFFFFF);
-}
-
-flag extractFloat64Sign(float64 a)
-{
- return a >> 63;
-}
-
-int16 extractFloat64Exp(float64 a)
-{
- return (a >> 52) & 0x7FF;
-}
-
-int16 extractFloat32Exp(float32 a)
-{
- return (a >> 23) & 0xFF;
-}
-
-flag extractFloat32Sign(float32 a)
-{
- return a >> 31;
-}
-
-bits32 extractFloat32Frac(float32 a)
-{
- return a & 0x007FFFFF;
-}
-
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig;
-}
-
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
-{
- bits64 z;
-
- if (count == 0) {
- z = a;
- } else if (count < 64) {
- z = (a >> count) | ((a << ((-count) & 63)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static int8 countLeadingZeros32(bits32 a)
-{
- static const int8 countLeadingZerosHigh[] = {
- 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
- };
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < 0x10000) {
- shiftCount += 16;
- a <<= 16;
- }
- if (a < 0x1000000) {
- shiftCount += 8;
- a <<= 8;
- }
- shiftCount += countLeadingZerosHigh[a >> 24];
- return shiftCount;
-
-}
-
-static int8 countLeadingZeros64(bits64 a)
-{
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < ((bits64) 1) << 32) {
- shiftCount += 32;
- } else {
- a >>= 32;
- }
- shiftCount += countLeadingZeros32(a);
- return shiftCount;
-
-}
-
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(zSig) - 1;
- return roundAndPackFloat64(zSign, zExp - shiftCount,
- zSig << shiftCount);
-
-}
-
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 10;
- bSig <<= 10;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0x7FF) {
- return packFloat64(zSign ^ 1, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- bSig |= LIT64(0x4000000000000000);
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- aSig |= LIT64(0x4000000000000000);
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat64(zSign, zExp, zSig);
-
-}
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 9;
- bSig <<= 9;
- if (0 < expDiff) {
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0x7FF) {
- return a;
- }
- if (aExp == 0)
- return packFloat64(zSign, 0, (aSig + bSig) >> 9);
- zSig = LIT64(0x4000000000000000) + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= LIT64(0x2000000000000000);
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits64) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig;
-}
-
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
-{
- bits32 z;
- if (count == 0) {
- z = a;
- } else if (count < 32) {
- z = (a >> count) | ((a << ((-count) & 31)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- flag roundNearestEven;
- int8 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x40;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x7F;
- if (0xFD <= (bits16) zExp) {
- if ((0xFD < zExp)
- || ((zExp == 0xFD)
- && ((sbits32) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat32(zSign, 0xFF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement < 0x80000000);
- shift32RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x7F;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 7;
- zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(zSig) - 1;
- return roundAndPackFloat32(zSign, zExp - shiftCount,
- zSig << shiftCount);
-}
-
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- flag roundNearestEven;
- int16 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x200;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x3FF;
- if (0x7FD <= (bits16) zExp) {
- if ((0x7FD < zExp)
- || ((zExp == 0x7FD)
- && ((sbits64) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat64(zSign, 0x7FF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement <
- LIT64(0x8000000000000000));
- shift64RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x3FF;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 10;
- zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat64(zSign, zExp, zSig);
-
-}
-
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 7;
- bSig <<= 7;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0xFF) {
- return packFloat32(zSign ^ 1, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x40000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- bSig |= 0x40000000;
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x40000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- aSig |= 0x40000000;
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 6;
- bSig <<= 6;
- if (0 < expDiff) {
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x20000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x20000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0xFF) {
- return a;
- }
- if (aExp == 0)
- return packFloat32(zSign, 0, (aSig + bSig) >> 6);
- zSig = 0x40000000 + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= 0x20000000;
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits32) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_sub(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return subFloat64Sigs(a, b, aSign);
- } else {
- return addFloat64Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_sub(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return subFloat32Sigs(a, b, aSign);
- } else {
- return addFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_add(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return addFloat32Sigs(a, b, aSign);
- } else {
- return subFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float64 float64_add(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return addFloat64Sigs(a, b, aSign);
- } else {
- return subFloat64Sigs(a, b, aSign);
- }
-}
-
-static void
-normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(aSig) - 11;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-}
-
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- bits64 z1;
-
- z1 = a1 + b1;
- *z1Ptr = z1;
- *z0Ptr = a0 + b0 + (z1 < a1);
-}
-
-void
-sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- *z1Ptr = a1 - b1;
- *z0Ptr = a0 - b0 - (a1 < b1);
-}
-
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
-{
- bits64 b0, b1;
- bits64 rem0, rem1, term0, term1;
- bits64 z, tmp;
- if (b <= a0)
- return LIT64(0xFFFFFFFFFFFFFFFF);
- b0 = b >> 32;
- tmp = a0;
- do_div(tmp, b0);
-
- z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : tmp << 32;
- mul64To128(b, z, &term0, &term1);
- sub128(a0, a1, term0, term1, &rem0, &rem1);
- while (((sbits64) rem0) < 0) {
- z -= LIT64(0x100000000);
- b1 = b << 32;
- add128(rem0, rem1, b0, b1, &rem0, &rem1);
- }
- rem0 = (rem0 << 32) | (rem1 >> 32);
- tmp = rem0;
- do_div(tmp, b0);
- z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : tmp;
- return z;
-}
-
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
-{
- bits32 aHigh, aLow, bHigh, bLow;
- bits64 z0, zMiddleA, zMiddleB, z1;
-
- aLow = a;
- aHigh = a >> 32;
- bLow = b;
- bHigh = b >> 32;
- z1 = ((bits64) aLow) * bLow;
- zMiddleA = ((bits64) aLow) * bHigh;
- zMiddleB = ((bits64) aHigh) * bLow;
- z0 = ((bits64) aHigh) * bHigh;
- zMiddleA += zMiddleB;
- z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32);
- zMiddleA <<= 32;
- z1 += zMiddleA;
- z0 += (z1 < zMiddleA);
- *z1Ptr = z1;
- *z0Ptr = z0;
-
-}
-
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(aSig) - 8;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-
-}
-
-float64 float64_div(float64 a, float64 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- bits64 rem0, rem1;
- bits64 term0, term1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0x7FF) {
- if (bExp == 0x7FF) {
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- if ((aExp | aSig) == 0) {
- float_raise(FPSCR_CAUSE_INVALID);
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x3FD;
- aSig = (aSig | LIT64(0x0010000000000000)) << 10;
- bSig = (bSig | LIT64(0x0010000000000000)) << 11;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = estimateDiv128To64(aSig, 0, bSig);
- if ((zSig & 0x1FF) <= 2) {
- mul64To128(bSig, zSig, &term0, &term1);
- sub128(aSig, 0, term0, term1, &rem0, &rem1);
- while ((sbits64) rem0 < 0) {
- --zSig;
- add128(rem0, rem1, 0, bSig, &rem0, &rem1);
- }
- zSig |= (rem1 != 0);
- }
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 float32_div(float32 a, float32 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig;
- uint64_t zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0xFF) {
- if (bExp == 0xFF) {
- }
- return packFloat32(zSign, 0xFF, 0);
- }
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- return packFloat32(zSign, 0xFF, 0);
- }
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x7D;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = (((bits64) aSig) << 32);
- do_div(zSig, bSig);
-
- if ((zSig & 0x3F) == 0) {
- zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32);
- }
- return roundAndPackFloat32(zSign, zExp, (bits32)zSig);
-
-}
-
-float32 float32_mul(float32 a, float32 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned int aSig, bSig;
- unsigned long long zSig64;
- unsigned int zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0))
- return roundAndPackFloat32(zSign, 0xff, 0);
-
- zExp = aExp + bExp - 0x7F;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64);
- zSig = zSig64;
- if (0 <= (signed int)(zSig << 1)) {
- zSig <<= 1;
- --zExp;
- }
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_mul(float64 a, float64 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned long long int aSig, bSig, zSig0, zSig1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
-
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0))
- return roundAndPackFloat64(zSign, 0x7ff, 0);
-
- zExp = aExp + bExp - 0x3FF;
- aSig = (aSig | 0x0010000000000000LL) << 10;
- bSig = (bSig | 0x0010000000000000LL) << 11;
- mul64To128(aSig, bSig, &zSig0, &zSig1);
- zSig0 |= (zSig1 != 0);
- if (0 <= (signed long long int)(zSig0 << 1)) {
- zSig0 <<= 1;
- --zExp;
- }
- return roundAndPackFloat64(zSign, zExp, zSig0);
-}
-
-/*
- * -------------------------------------------------------------------------------
- * Returns the result of converting the double-precision floating-point value
- * `a' to the single-precision floating-point format. The conversion is
- * performed according to the IEC/IEEE Standard for Binary Floating-point
- * Arithmetic.
- * -------------------------------------------------------------------------------
- * */
-float32 float64_to_float32(float64 a)
-{
- flag aSign;
- int16 aExp;
- bits64 aSig;
- bits32 zSig;
-
- aSig = extractFloat64Frac( a );
- aExp = extractFloat64Exp( a );
- aSign = extractFloat64Sign( a );
-
- shift64RightJamming( aSig, 22, &aSig );
- zSig = aSig;
- if ( aExp || zSig ) {
- zSig |= 0x40000000;
- aExp -= 0x381;
- }
- return roundAndPackFloat32(aSign, aExp, zSig);
-}
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
deleted file mode 100644
index a76b94e41e9134..00000000000000
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/sq.c
- *
- * General management API for SH-4 integrated Store Queues
- *
- * Copyright (C) 2001 - 2006 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/bitmap.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/prefetch.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <cpu/sq.h>
-
-struct sq_mapping;
-
-struct sq_mapping {
- const char *name;
-
- unsigned long sq_addr;
- unsigned long addr;
- unsigned int size;
-
- struct sq_mapping *next;
-};
-
-static struct sq_mapping *sq_mapping_list;
-static DEFINE_SPINLOCK(sq_mapping_lock);
-static struct kmem_cache *sq_cache;
-static unsigned long *sq_bitmap;
-
-#define store_queue_barrier() \
-do { \
- (void)__raw_readl(P4SEG_STORE_QUE); \
- __raw_writel(0, P4SEG_STORE_QUE + 0); \
- __raw_writel(0, P4SEG_STORE_QUE + 8); \
-} while (0);
-
-/**
- * sq_flush_range - Flush (prefetch) a specific SQ range
- * @start: the store queue address to start flushing from
- * @len: the length to flush
- *
- * Flushes the store queue cache from @start to @start + @len in a
- * linear fashion.
- */
-void sq_flush_range(unsigned long start, unsigned int len)
-{
- unsigned long *sq = (unsigned long *)start;
-
- /* Flush the queues */
- for (len >>= 5; len--; sq += 8)
- prefetchw(sq);
-
- /* Wait for completion */
- store_queue_barrier();
-}
-EXPORT_SYMBOL(sq_flush_range);
-
-static inline void sq_mapping_list_add(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- p = &sq_mapping_list;
- while ((tmp = *p) != NULL)
- p = &tmp->next;
-
- map->next = tmp;
- *p = map;
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static inline void sq_mapping_list_del(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
- if (tmp == map) {
- *p = tmp->next;
- break;
- }
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
-{
-#if defined(CONFIG_MMU)
- struct vm_struct *vma;
-
- vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr,
- SQ_ADDRMAX, __builtin_return_address(0));
- if (!vma)
- return -ENOMEM;
-
- vma->phys_addr = map->addr;
-
- if (ioremap_page_range((unsigned long)vma->addr,
- (unsigned long)vma->addr + map->size,
- vma->phys_addr, prot)) {
- vunmap(vma->addr);
- return -EAGAIN;
- }
-#else
- /*
- * Without an MMU (or with it turned off), this is much more
- * straightforward, as we can just load up each queue's QACR with
- * the physical address appropriately masked.
- */
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
-#endif
-
- return 0;
-}
-
-/**
- * sq_remap - Map a physical address through the Store Queues
- * @phys: Physical address of mapping.
- * @size: Length of mapping.
- * @name: User invoking mapping.
- * @prot: Protection bits.
- *
- * Remaps the physical address @phys through the next available store queue
- * address of @size length. @name is logged at boot time as well as through
- * the sysfs interface.
- */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot)
-{
- struct sq_mapping *map;
- unsigned long end;
- unsigned int psz;
- int ret, page;
-
- /* Don't allow wraparound or zero size */
- end = phys + size - 1;
- if (unlikely(!size || end < phys))
- return -EINVAL;
- /* Don't allow anyone to remap normal memory.. */
- if (unlikely(phys < virt_to_phys(high_memory)))
- return -EINVAL;
-
- phys &= PAGE_MASK;
- size = PAGE_ALIGN(end + 1) - phys;
-
- map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
- if (unlikely(!map))
- return -ENOMEM;
-
- map->addr = phys;
- map->size = size;
- map->name = name;
-
- page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT,
- get_order(map->size));
- if (unlikely(page < 0)) {
- ret = -ENOSPC;
- goto out;
- }
-
- map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
-
- ret = __sq_remap(map, prot);
- if (unlikely(ret != 0))
- goto out;
-
- psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- pr_info("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n",
- likely(map->name) ? map->name : "???",
- psz, psz == 1 ? " " : "s",
- map->sq_addr, map->addr);
-
- sq_mapping_list_add(map);
-
- return map->sq_addr;
-
-out:
- kmem_cache_free(sq_cache, map);
- return ret;
-}
-EXPORT_SYMBOL(sq_remap);
-
-/**
- * sq_unmap - Unmap a Store Queue allocation
- * @vaddr: Pre-allocated Store Queue mapping.
- *
- * Unmaps the store queue allocation @map that was previously created by
- * sq_remap(). Also frees up the pte that was previously inserted into
- * the kernel page table and discards the UTLB translation.
- */
-void sq_unmap(unsigned long vaddr)
-{
- struct sq_mapping **p, *map;
- int page;
-
- for (p = &sq_mapping_list; (map = *p); p = &map->next)
- if (map->sq_addr == vaddr)
- break;
-
- if (unlikely(!map)) {
- printk("%s: bad store queue address 0x%08lx\n",
- __func__, vaddr);
- return;
- }
-
- page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
- bitmap_release_region(sq_bitmap, page, get_order(map->size));
-
-#ifdef CONFIG_MMU
- {
- /*
- * Tear down the VMA in the MMU case.
- */
- struct vm_struct *vma;
-
- vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
- if (!vma) {
- printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __func__, map->sq_addr);
- return;
- }
- }
-#endif
-
- sq_mapping_list_del(map);
-
- kmem_cache_free(sq_cache, map);
-}
-EXPORT_SYMBOL(sq_unmap);
-
-/*
- * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
- * there is any other easy way to add things on a per-cpu basis without
- * putting the directory entries somewhere stupid and having to create
- * links in sysfs by hand back in to the per-cpu directories.
- *
- * Some day we may want to have an additional abstraction per store
- * queue, but considering the kobject hell we already have to deal with,
- * it's simply not worth the trouble.
- */
-static struct kobject *sq_kobject[NR_CPUS];
-
-struct sq_sysfs_attr {
- struct attribute attr;
- ssize_t (*show)(char *buf);
- ssize_t (*store)(const char *buf, size_t count);
-};
-
-#define to_sq_sysfs_attr(a) container_of(a, struct sq_sysfs_attr, attr)
-
-static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->show))
- return sattr->show(buf);
-
- return -EIO;
-}
-
-static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->store))
- return sattr->store(buf, count);
-
- return -EIO;
-}
-
-static ssize_t mapping_show(char *buf)
-{
- struct sq_mapping **list, *entry;
- char *p = buf;
-
- for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
- p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
- entry->sq_addr, entry->sq_addr + entry->size,
- entry->addr, entry->name);
-
- return p - buf;
-}
-
-static ssize_t mapping_store(const char *buf, size_t count)
-{
- unsigned long base = 0, len = 0;
-
- sscanf(buf, "%lx %lx", &base, &len);
- if (!base)
- return -EIO;
-
- if (likely(len)) {
- int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
- if (ret < 0)
- return ret;
- } else
- sq_unmap(base);
-
- return count;
-}
-
-static struct sq_sysfs_attr mapping_attr =
- __ATTR(mapping, 0644, mapping_show, mapping_store);
-
-static struct attribute *sq_sysfs_attrs[] = {
- &mapping_attr.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(sq_sysfs);
-
-static const struct sysfs_ops sq_sysfs_ops = {
- .show = sq_sysfs_show,
- .store = sq_sysfs_store,
-};
-
-static struct kobj_type ktype_percpu_entry = {
- .sysfs_ops = &sq_sysfs_ops,
- .default_groups = sq_sysfs_groups,
-};
-
-static int sq_dev_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj;
- int error;
-
- sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
- if (unlikely(!sq_kobject[cpu]))
- return -ENOMEM;
-
- kobj = sq_kobject[cpu];
- error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
- "%s", "sq");
- if (!error)
- kobject_uevent(kobj, KOBJ_ADD);
- return error;
-}
-
-static void sq_dev_remove(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj = sq_kobject[cpu];
-
- kobject_put(kobj);
-}
-
-static struct subsys_interface sq_interface = {
- .name = "sq",
- .subsys = &cpu_subsys,
- .add_dev = sq_dev_add,
- .remove_dev = sq_dev_remove,
-};
-
-static int __init sq_api_init(void)
-{
- unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
- unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
- int ret = -ENOMEM;
-
- printk(KERN_NOTICE "sq: Registering store queue API.\n");
-
- sq_cache = kmem_cache_create("store_queue_cache",
- sizeof(struct sq_mapping), 0, 0, NULL);
- if (unlikely(!sq_cache))
- return ret;
-
- sq_bitmap = kzalloc(size, GFP_KERNEL);
- if (unlikely(!sq_bitmap))
- goto out;
-
- ret = subsys_interface_register(&sq_interface);
- if (unlikely(ret != 0))
- goto out;
-
- return 0;
-
-out:
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-
- return ret;
-}
-
-static void __exit sq_api_exit(void)
-{
- subsys_interface_unregister(&sq_interface);
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-}
-
-module_init(sq_api_init);
-module_exit(sq_api_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
-MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
deleted file mode 100644
index baf73a8fc2a0f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7757) += setup-sh7757.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o serial-sh7722.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7734) += setup-sh7734.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
-obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o intc-shx3.o
-
-# SMP setup
-smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SUBTYPE_SH7757) := clock-sh7757.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7723.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7724.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7734) := clock-sh7734.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7366.o
-clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7734) := pinmux-sh7734.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7757) := pinmux-sh7757.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SHX3) := pinmux-shx3.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_SMP) += $(smp-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 32cb5d1fd3b32f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7343 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP004, MSTP003, MSTP002, MSTP001,
- MSTP109, MSTP108, MSTP100,
- MSTP225, MSTP224, MSTP218, MSTP217, MSTP216,
- MSTP214, MSTP213, MSTP212, MSTP211, MSTP208,
- MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP003] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [MSTP225] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 25, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP216] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 16, 0),
- [MSTP214] = MSTP(&r_clk, MSTPCR2, 14, 0),
- [MSTP213] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 13, 0),
- [MSTP212] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 12, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP208] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [MSTP206] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("uram0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP004]),
-
- CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
- CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("sim0", &mstp_clks[MSTP216]),
- CLKDEV_CON_ID("keysc0", &mstp_clks[MSTP214]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP213]),
- CLKDEV_CON_ID("s3d40", &mstp_clks[MSTP212]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("siu0", &mstp_clks[MSTP208]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[MSTP206]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
deleted file mode 100644
index aa3444b41e72a2..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7366.c
- *
- * SH7366 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7366 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP002, MSTP001,
- MSTP109, MSTP100,
- MSTP227, MSTP226, MSTP224, MSTP223, MSTP222, MSTP218, MSTP217,
- MSTP211, MSTP207, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
-
- [MSTP227] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [MSTP226] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 26, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP223] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 23, 0),
- [MSTP222] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 22, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP207] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("rsmem0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
-
- CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
- CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
- CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("dacy0", &mstp_clks[MSTP223]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP222]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("veu1", &mstp_clks[MSTP207]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
deleted file mode 100644
index 38b057703eaada..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
- *
- * SH7722 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7722.h>
-
-/* SH7722 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_URAM] = SH_CLK_MSTP32(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_XYMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_TMU] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_SDHI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USBF] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
-
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[HWBLK_USBF]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
deleted file mode 100644
index 9dc3a987d7cf87..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ /dev/null
@@ -1,301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
- *
- * SH7723 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7723.h>
-
-/* SH7723 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x0dbf, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x0dbf, 0),
-};
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[] = {
- /* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
- [HWBLK_MERAM] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 0, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 28, 0),
- [HWBLK_ADC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_ICB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, CLK_ENABLE_ON_INIT),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 10, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_VEU2H1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU2H0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[HWBLK_MERAM]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_CON_ID("icb0", &mstp_clks[HWBLK_ICB]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret |= clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
deleted file mode 100644
index 2a1f0d847a2efb..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7724.c
- *
- * SH7724 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7724.h>
-
-/* SH7724 registers */
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define SPUCLKCR 0xa415003c
-#define FLLFRQ 0xa4150050
-#define LSTATS 0xa4150060
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The fll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long fll_recalc(struct clk *clk)
-{
- unsigned long mult = 0;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(FLLFRQ) & 0x3ff;
-
- if (__raw_readl(FLLFRQ) & 0x4000)
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops fll_clk_ops = {
- .recalc = fll_recalc,
-};
-
-static struct clk fll_clk = {
- .ops = &fll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCRA) >> 24) & 0x3f) + 1) * 2;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/* A fixed divide-by-3 block use by the div6 clocks */
-static unsigned long div3_recalc(struct clk *clk)
-{
- return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops div3_clk_ops = {
- .recalc = div3_recalc,
-};
-
-static struct clk div3_clk = {
- .ops = &div3_clk_ops,
- .parent = &pll_clk,
-};
-
-/* External input clock (pin name: FSIMCKA/FSIMCKB/DV_CLKI ) */
-struct clk sh7724_fsimcka_clk = {
-};
-
-struct clk sh7724_fsimckb_clk = {
-};
-
-struct clk sh7724_dv_clki = {
-};
-
-static struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &fll_clk,
- &pll_clk,
- &div3_clk,
- &sh7724_fsimcka_clk,
- &sh7724_fsimckb_clk,
- &sh7724_dv_clki,
-};
-
-static void div4_kick(struct clk *clk)
-{
- unsigned long value;
-
- /* set KICK bit in FRQCRA to update hardware setting */
- value = __raw_readl(FRQCRA);
- value |= (1 << 31);
- __raw_writel(value, FRQCRA);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCRA, 0, 0x2f7c, 0),
- [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
-};
-
-enum { DIV6_V, DIV6_I, DIV6_S, DIV6_FA, DIV6_FB, DIV6_NR };
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *common_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
-};
-
-static struct clk *vclkcr_parent[8] = {
- [0] = &div3_clk,
- [2] = &sh7724_dv_clki,
- [4] = &extal_clk,
-};
-
-static struct clk *fclkacr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimcka_clk,
- [3] = NULL,
-};
-
-static struct clk *fclkbcr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimckb_clk,
- [3] = NULL,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6_EXT(VCLKCR, 0,
- vclkcr_parent, ARRAY_SIZE(vclkcr_parent), 12, 3),
- [DIV6_I] = SH_CLK_DIV6_EXT(IRDACLKCR, 0,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_S] = SH_CLK_DIV6_EXT(SPUCLKCR, CLK_ENABLE_ON_INIT,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_FA] = SH_CLK_DIV6_EXT(FCLKACR, 0,
- fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
- [DIV6_FB] = SH_CLK_DIV6_EXT(FCLKBCR, 0,
- fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_RSMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
-
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 12, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 11, 0),
- [HWBLK_IIC0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_IIC1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [HWBLK_MMC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 29, 0),
- [HWBLK_ETHER] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 28, 0),
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 26, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_USB1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, 0),
- [HWBLK_USB0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 20, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 19, 0),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_VEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 15, 0),
- [HWBLK_CEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 13, 0),
- [HWBLK_BEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 12, 0),
- [HWBLK_2DDMAC] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 10, 0),
- [HWBLK_SPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("fll_clk", &fll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("div3_clk", &div3_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("vpu_clk", &div4_clks[DIV4_M1]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
- CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
- CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("rs0", &mstp_clks[HWBLK_RSMEM]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC0]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[HWBLK_IIC1]),
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[HWBLK_MMC]),
- CLKDEV_DEV_ID("sh7724-ether.0", &mstp_clks[HWBLK_ETHER]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU1]),
- CLKDEV_DEV_ID("renesas-ceu.1", &mstp_clks[HWBLK_CEU1]),
- CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
- CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_DEV_ID("sh-vou", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU0]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or fll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &fll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
deleted file mode 100644
index c81ee60eddb8e7..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7734.c
- *
- * Clock framework for SH7734
- *
- * Copyright (C) 2011, 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011, 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-#define MODEMR (0xFFCC0020)
-#define MODEMR_MASK (0x6)
-#define MODEMR_533MHZ (0x2)
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int mode = 12;
- u32 r = __raw_readl(MODEMR);
-
- if ((r & MODEMR_MASK) & MODEMR_533MHZ)
- mode = 16;
-
- return clk->parent->rate * mode;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_S, DIV4_B, DIV4_M, DIV4_S1, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQMR1, 28, 0x0003, CLK_ENABLE_ON_INIT),
- [DIV4_S] = DIV4(FRQMR1, 20, 0x000C, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQMR1, 16, 0x0140, CLK_ENABLE_ON_INIT),
- [DIV4_M] = DIV4(FRQMR1, 12, 0x0004, CLK_ENABLE_ON_INIT),
- [DIV4_S1] = DIV4(FRQMR1, 4, 0x0030, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQMR1, 0, 0x0140, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xFFC80030
-#define MSTPCR1 0xFFC80034
-#define MSTPCR3 0xFFC8003C
-
-enum {
- MSTP030, MSTP029, /* IIC */
- MSTP026, MSTP025, MSTP024, /* SCIF */
- MSTP023,
- MSTP022, MSTP021,
- MSTP019, /* HSCIF */
- MSTP016, MSTP015, MSTP014, /* TMU / TIMER */
- MSTP012, MSTP011, MSTP010, MSTP009, MSTP008, /* SSI */
- MSTP007, /* HSPI */
- MSTP115, /* ADMAC */
- MSTP114, /* GETHER */
- MSTP111, /* DMAC */
- MSTP109, /* VIDEOIN1 */
- MSTP108, /* VIDEOIN0 */
- MSTP107, /* RGPVBG */
- MSTP106, /* 2DG */
- MSTP103, /* VIEW */
- MSTP100, /* USB */
- MSTP331, /* MMC */
- MSTP330, /* MIMLB */
- MSTP323, /* SDHI0 */
- MSTP322, /* SDHI1 */
- MSTP321, /* SDHI2 */
- MSTP320, /* RQSPI */
- MSTP319, /* SRC0 */
- MSTP318, /* SRC1 */
- MSTP317, /* RSPI */
- MSTP316, /* RCAN0 */
- MSTP315, /* RCAN1 */
- MSTP314, /* FLTCL */
- MSTP313, /* ADC */
- MSTP312, /* MTU */
- MSTP304, /* IE-BUS */
- MSTP303, /* RTC */
- MSTP302, /* HIF */
- MSTP301, /* STIF0 */
- MSTP300, /* STIF1 */
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0),
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP019] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
-
- /* MSTPCR1 */
- [MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP109] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
- [MSTP107] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 7, 0),
- [MSTP106] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 6, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0),
-
- /* MSTPCR3 */
- [MSTP331] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 31, 0),
- [MSTP330] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 30, 0),
- [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0),
- [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0),
- [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0),
- [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0),
- [MSTP319] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 19, 0),
- [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 18, 0),
- [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 17, 0),
- [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 16, 0),
- [MSTP315] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 15, 0),
- [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 14, 0),
- [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 13, 0),
- [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 12, 0),
- [MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 4, 0),
- [MSTP303] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 3, 0),
- [MSTP302] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 2, 0),
- [MSTP301] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 1, 0),
- [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_M]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk1", &div4_clks[DIV4_S1]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("i2c-sh7734.0", &mstp_clks[MSTP030]),
- CLKDEV_DEV_ID("i2c-sh7734.1", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP024]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP023]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP022]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("ssi0", &mstp_clks[MSTP012]),
- CLKDEV_CON_ID("ssi1", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("ssi2", &mstp_clks[MSTP010]),
- CLKDEV_CON_ID("ssi3", &mstp_clks[MSTP009]),
- CLKDEV_CON_ID("sss", &mstp_clks[MSTP008]),
- CLKDEV_CON_ID("hspi", &mstp_clks[MSTP007]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP100]),
- CLKDEV_CON_ID("videoin0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("videoin1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("rgpvg", &mstp_clks[MSTP107]),
- CLKDEV_CON_ID("2dg", &mstp_clks[MSTP106]),
- CLKDEV_CON_ID("view", &mstp_clks[MSTP103]),
-
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP331]),
- CLKDEV_CON_ID("mimlb0", &mstp_clks[MSTP330]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP323]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP322]),
- CLKDEV_CON_ID("sdhi2", &mstp_clks[MSTP321]),
- CLKDEV_CON_ID("rqspi0", &mstp_clks[MSTP320]),
- CLKDEV_CON_ID("src0", &mstp_clks[MSTP319]),
- CLKDEV_CON_ID("src1", &mstp_clks[MSTP318]),
- CLKDEV_CON_ID("rsp0", &mstp_clks[MSTP317]),
- CLKDEV_CON_ID("rcan0", &mstp_clks[MSTP316]),
- CLKDEV_CON_ID("rcan1", &mstp_clks[MSTP315]),
- CLKDEV_CON_ID("fltcl0", &mstp_clks[MSTP314]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP313]),
- CLKDEV_CON_ID("mtu0", &mstp_clks[MSTP312]),
- CLKDEV_CON_ID("iebus0", &mstp_clks[MSTP304]),
- CLKDEV_DEV_ID("sh7734-gether.0", &mstp_clks[MSTP114]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP303]),
- CLKDEV_CON_ID("hif0", &mstp_clks[MSTP302]),
- CLKDEV_CON_ID("stif0", &mstp_clks[MSTP301]),
- CLKDEV_CON_ID("stif1", &mstp_clks[MSTP300]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(main_clks); i++)
- ret |= clk_register(main_clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
deleted file mode 100644
index 9acb72210fed48..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh7757.c
- *
- * SH7757 support for the clock framework
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 48000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN0) ? 24 : 16;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 1, 2, 1, 1, 4, 1, 6,
- 1, 1, 1, 16, 1, 24, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQCR, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- /*
- * P clock is always enable, because some P clock modules is used
- * by Host PC.
- */
- [DIV4_P] = DIV4(0, 0x2800, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(12, 0x00a0, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(20, 0x0004, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR2 0xffc10028
-
-enum { MSTP004, MSTP000, MSTP127, MSTP114, MSTP113, MSTP112,
- MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 27, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
- [MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
-
- /* MSTPCR2 */
- [MSTP220] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 20, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP112]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP111]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP110]),
-
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
- CLKDEV_DEV_ID("rspi.2", &mstp_clks[MSTP127]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
deleted file mode 100644
index aaff4b96812c6a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7763.c
- *
- * SH7763 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
-}
-
-static struct sh_clk_ops sh7763_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
- return clk->parent->rate / p0fc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7763_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7763_clk_ops[] = {
- &sh7763_master_clk_ops,
- &sh7763_module_clk_ops,
- &sh7763_bus_clk_ops,
- &sh7763_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7763_clk_ops))
- *ops = sh7763_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7763_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7763_shyway_clk_ops,
-};
-
-/*
- * Additional SH7763-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7763_onchip_clocks[] = {
- &sh7763_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7763_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
- struct clk *clkp = sh7763_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
deleted file mode 100644
index f356dfcd17b751..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
- *
- * SH7770 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
-static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
-}
-
-static struct sh_clk_ops sh7770_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x000f);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7770_clk_ops[] = {
- &sh7770_master_clk_ops,
- &sh7770_module_clk_ops,
- &sh7770_bus_clk_ops,
- &sh7770_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7770_clk_ops))
- *ops = sh7770_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
deleted file mode 100644
index fc0a3efb53d5e0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
- *
- * SH7780 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 2, 4 };
-static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
-static int pfc_divisors[] = { 1, 24, 24, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7780_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x0003);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7780_clk_ops[] = {
- &sh7780_master_clk_ops,
- &sh7780_module_clk_ops,
- &sh7780_bus_clk_ops,
- &sh7780_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7780_clk_ops))
- *ops = sh7780_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7780_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7780_shyway_clk_ops,
-};
-
-/*
- * Additional SH7780-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7780_onchip_clocks[] = {
- &sh7780_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7780_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
- struct clk *clkp = sh7780_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
deleted file mode 100644
index fca351378bbce6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
- *
- * SH7785 support for the clock framework
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <cpu/sh7785.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN4) ? 36 : 72;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
- DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_DU] = DIV4(4, 0x0ff0, 0),
- [DIV4_GA] = DIV4(8, 0x0030, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(24, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP013, MSTP012, MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP119, MSTP117, MSTP105, MSTP104, MSTP100,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP013] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 13, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP117] = SH_CLK_MSTP32(NULL, MSTPCR1, 17, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP100] = SH_CLK_MSTP32(NULL, MSTPCR1, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ga_clk", &div4_clks[DIV4_GA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP117]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
deleted file mode 100644
index f23862df3e8fb9..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
- *
- * SH7786 support for the clock framework
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- /*
- * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
- * while modes 3, 4, and 5 use an x32.
- */
- multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0b40, 0),
- [DIV4_DU] = DIV4(4, 0x0010, 0),
- [DIV4_DDR] = DIV4(12, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0360, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x0006, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc40030
-#define MSTPCR1 0xffc40034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP011, MSTP010, MSTP009, MSTP008,
- MSTP005, MSTP004, MSTP002,
- MSTP112, MSTP110, MSTP109, MSTP108,
- MSTP105, MSTP104, MSTP103, MSTP102,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP005] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP112] = SH_CLK_MSTP32(NULL, MSTPCR1, 12, 0),
- [MSTP110] = SH_CLK_MSTP32(NULL, MSTPCR1, 10, 0),
- [MSTP109] = SH_CLK_MSTP32(NULL, MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(NULL, MSTPCR1, 8, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP103] = SH_CLK_MSTP32(NULL, MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(NULL, MSTPCR1, 2, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]),
- CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP010]),
- CLKDEV_ICK_ID("fck", "sh-tmu.3", &mstp_clks[MSTP011]),
-
- CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]),
- CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP112]),
- CLKDEV_CON_ID("pcie2_fck", &mstp_clks[MSTP110]),
- CLKDEV_CON_ID("pcie1_fck", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("pcie0_fck", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("du_fck", &mstp_clks[MSTP103]),
- CLKDEV_CON_ID("ether_fck", &mstp_clks[MSTP102]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
deleted file mode 100644
index 6c7b6ab6cab5a6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-shx3.c
- *
- * SH-X3 support for the clock framework
- *
- * Copyright (C) 2006-2007 Renesas Technology Corp.
- * Copyright (C) 2006-2007 Renesas Solutions Corp.
- * Copyright (C) 2006-2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 16666666,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- /* PLL1 has a fixed x72 multiplier. */
- return clk->parent->rate * 72;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_SHA, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_SHA] = DIV4(4, 0x0ff0, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc00030
-#define MSTPCR1 0xffc00034
-
-enum { MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP001, MSTP000, MSTP119, MSTP105,
- MSTP104, MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shywaya_clk", &div4_clks[DIV4_SHA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]),
- CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/intc-shx3.c b/arch/sh/kernel/cpu/sh4a/intc-shx3.c
deleted file mode 100644
index eea87d25efbb3f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/intc-shx3.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared support for SH-X3 interrupt controllers.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/init.h>
-
-#define INTACK 0xfe4100b8
-#define INTACKCLR 0xfe4100bc
-#define INTC_USERIMASK 0xfe411000
-
-#ifdef CONFIG_INTC_BALANCING
-unsigned int irq_lookup(unsigned int irq)
-{
- return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
-}
-
-void irq_finish(unsigned int irq)
-{
- __raw_writel(irq2evt(irq), INTACKCLR);
-}
-#endif
-
-static int __init shx3_irq_setup(void)
-{
- return register_intc_userimask(INTC_USERIMASK);
-}
-arch_initcall(shx3_irq_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
deleted file mode 100644
index 3beb8fed3d289d..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/perf_event.c
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH-4A performance counters
- *
- * Copyright (C) 2009, 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx))
-#define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx))
-
-#define CCBR_CIT_MASK (0x7ff << 6)
-#define CCBR_DUC (1 << 3)
-#define CCBR_CMDS (1 << 1)
-#define CCBR_PPCE (1 << 0)
-
-#ifdef CONFIG_CPU_SHX3
-/*
- * The PMCAT location for SH-X3 CPUs was quietly moved, while the CCBR
- * and PMCTR locations remains tentatively constant. This change remains
- * wholly undocumented, and was simply found through trial and error.
- *
- * Early cuts of SH-X3 still appear to use the SH-X/SH-X2 locations, and
- * it's unclear when this ceased to be the case. For now we always use
- * the new location (if future parts keep up with this trend then
- * scanning for them at runtime also remains a viable option.)
- *
- * The gap in the register space also suggests that there are other
- * undocumented counters, so this will need to be revisited at a later
- * point in time.
- */
-#define PPC_PMCAT 0xfc100240
-#else
-#define PPC_PMCAT 0xfc100080
-#endif
-
-#define PMCAT_OVF3 (1 << 27)
-#define PMCAT_CNN3 (1 << 26)
-#define PMCAT_CLR3 (1 << 25)
-#define PMCAT_OVF2 (1 << 19)
-#define PMCAT_CLR2 (1 << 17)
-#define PMCAT_OVF1 (1 << 11)
-#define PMCAT_CNN1 (1 << 10)
-#define PMCAT_CLR1 (1 << 9)
-#define PMCAT_OVF0 (1 << 3)
-#define PMCAT_CLR0 (1 << 1)
-
-static struct sh_pmu sh4a_pmu;
-
-/*
- * Supported raw event codes:
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x0000 number of elapsed cycles
- * 0x0200 number of elapsed cycles in privileged mode
- * 0x0280 number of elapsed cycles while SR.BL is asserted
- * 0x0202 instruction execution
- * 0x0203 instruction execution in parallel
- * 0x0204 number of unconditional branches
- * 0x0208 number of exceptions
- * 0x0209 number of interrupts
- * 0x0220 UTLB miss caused by instruction fetch
- * 0x0222 UTLB miss caused by operand access
- * 0x02a0 number of ITLB misses
- * 0x0028 number of accesses to instruction memories
- * 0x0029 number of accesses to instruction cache
- * 0x002a instruction cache miss
- * 0x022e number of access to instruction X/Y memory
- * 0x0030 number of reads to operand memories
- * 0x0038 number of writes to operand memories
- * 0x0031 number of operand cache read accesses
- * 0x0039 number of operand cache write accesses
- * 0x0032 operand cache read miss
- * 0x003a operand cache write miss
- * 0x0236 number of reads to operand X/Y memory
- * 0x023e number of writes to operand X/Y memory
- * 0x0237 number of reads to operand U memory
- * 0x023f number of writes to operand U memory
- * 0x0337 number of U memory read buffer misses
- * 0x02b4 number of wait cycles due to operand read access
- * 0x02bc number of wait cycles due to operand write access
- * 0x0033 number of wait cycles due to operand cache read miss
- * 0x003b number of wait cycles due to operand cache write miss
- */
-
-/*
- * Special reserved bits used by hardware emulators, read values will
- * vary, but writes must always be 0.
- */
-#define PMCAT_EMU_CLR_MASK ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
-
-static const int sh4a_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0000,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x0202,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0029, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x002a, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0204,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh4a_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0031,
- [ C(RESULT_MISS) ] = 0x0032,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0039,
- [ C(RESULT_MISS) ] = 0x003a,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0029,
- [ C(RESULT_MISS) ] = 0x002a,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0030,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0038,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0222,
- [ C(RESULT_MISS) ] = 0x0220,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x02a0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh4a_event_map(int event)
-{
- return sh4a_general_events[event];
-}
-
-static u64 sh4a_pmu_read(int idx)
-{
- return __raw_readl(PPC_PMCTR(idx));
-}
-
-static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
- __raw_writel(tmp, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_PMCAT);
- tmp &= ~PMCAT_EMU_CLR_MASK;
- tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
- __raw_writel(tmp, PPC_PMCAT);
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
- __raw_writel(tmp, PPC_CCBR(idx));
-
- __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
-}
-
-static void sh4a_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
-}
-
-static struct sh_pmu sh4a_pmu = {
- .name = "sh4a",
- .num_events = 2,
- .event_map = sh4a_event_map,
- .max_events = ARRAY_SIZE(sh4a_general_events),
- .raw_event_mask = 0x3ff,
- .cache_events = &sh4a_cache_events,
- .read = sh4a_pmu_read,
- .disable = sh4a_pmu_disable,
- .enable = sh4a_pmu_enable,
- .disable_all = sh4a_pmu_disable_all,
- .enable_all = sh4a_pmu_enable_all,
-};
-
-static int __init sh4a_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh4a_pmu);
-}
-early_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
deleted file mode 100644
index 0dd5312f930b1e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7722_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405018f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7722", sh7722_pfc_resources,
- ARRAY_SIZE(sh7722_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
deleted file mode 100644
index b67abc0637a487..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7723_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7723", sh7723_pfc_resources,
- ARRAY_SIZE(sh7723_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
deleted file mode 100644
index b43c3259060bbe..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7724_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7724", sh7724_pfc_resources,
- ARRAY_SIZE(sh7724_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
deleted file mode 100644
index 46256b19619a79..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7734_pfc_resources[] = {
- [0] = { /* PFC */
- .start = 0xFFFC0000,
- .end = 0xFFFC011C,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* GPIO */
- .start = 0xFFC40000,
- .end = 0xFFC4502B,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7734", sh7734_pfc_resources,
- ARRAY_SIZE(sh7734_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
deleted file mode 100644
index c92f304cb4bad1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7757_pfc_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7757", sh7757_pfc_resources,
- ARRAY_SIZE(sh7757_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
deleted file mode 100644
index f329de6e758a4f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7785_pfc_resources[] = {
- [0] = {
- .start = 0xffe70000,
- .end = 0xffe7008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7785", sh7785_pfc_resources,
- ARRAY_SIZE(sh7785_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
deleted file mode 100644
index 47e8639f3e71b1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7786_pfc_resources[] = {
- [0] = {
- .start = 0xffcc0000,
- .end = 0xffcc008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7786", sh7786_pfc_resources,
- ARRAY_SIZE(sh7786_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c b/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
deleted file mode 100644
index 6c02f625646754..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource shx3_pfc_resources[] = {
- [0] = {
- .start = 0xffc70000,
- .end = 0xffc7001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-shx3", shx3_pfc_resources,
- ARRAY_SIZE(shx3_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
deleted file mode 100644
index 6ecc8b6e133c69..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#define PSCR 0xA405011E
-
-static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (port->mapbase == 0xffe00000) {
- data = __raw_readw(PSCR);
- data &= ~0x03cf;
- if (!(cflag & CRTSCTS))
- data |= 0x0340;
-
- __raw_writew(data, PSCR);
- }
-}
-
-struct plat_sci_port_ops sh7722_sci_port_ops = {
- .init_pins = sh7722_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
deleted file mode 100644
index b6015188fab1f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7343 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc60)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x780),
- .end = evt2irq(0x7e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7343_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
-};
-
-static int __init sh7343_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7343_devices,
- ARRAY_SIZE(sh7343_devices));
-}
-arch_initcall(sh7343_devices_setup);
-
-static struct platform_device *sh7343_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7343_early_devices,
- ARRAY_SIZE(sh7343_early_devices));
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, TPU, Z3D4, USBI0, USBI1,
- MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF, SCIF1, SCIF2, SCIF3,
- SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
- IRDA, SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- JPU, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, USB,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
- INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
- INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
- INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
- INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
- INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
- INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
- INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
- INTC_GROUP(USB, USBI0, USBI1),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7343",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
deleted file mode 100644
index 6676beef053e59..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7366 Setup
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(usb_host_resources),
- .resource = usb_host_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU(1)",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU(2)",
- .start = 0xfe924000,
- .end = 0xfe9240b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7366_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
- &iic_device,
- &usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7366_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7366_devices,
- ARRAY_SIZE(sh7366_devices));
-}
-arch_initcall(sh7366_devices_setup);
-
-static struct platform_device *sh7366_early_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7366_early_devices,
- ARRAY_SIZE(sh7366_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- ICB,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, USB,
- MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
- DMAC4, DMAC5, DMAC_DADERR,
- SCIF, SCIFA1, SCIFA2,
- DENC, MSIOF,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- VEU2, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(ICB, 0x700),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
- INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
- INTC_VECT(MMC_MMC3I, 0xb40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
- INTC_VECT(SCIFA2, 0xc40),
- INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { 0, 0, 0, ICB } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, 0, 0, 0, 0, MSIOF } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, 0, 0, 0, 0, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7366",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* TODO: Register Node 1 */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
deleted file mode 100644
index 0c6757ef63f42c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ /dev/null
@@ -1,666 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7722 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/m66592.h>
-
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/siu.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7722.h>
-#include <cpu/serial.h>
-
-static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_TX,
- .addr = 0xa454c098,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb1,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_RX,
- .addr = 0xa454c090,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb2,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_TX,
- .addr = 0xa454c09c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb5,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_RX,
- .addr = 0xa454c094,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb6,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_channel sh7722_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7722_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7722_dmae_slaves),
- .channel = sh7722_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7722_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7722_dmae_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device dma_device = {
- .name = "sh-dma-engine",
- .id = -1,
- .resource = sh7722_dmae_resources,
- .num_resources = ARRAY_SIZE(sh7722_dmae_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0x7a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0x780),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .on_chip = 1,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "USBF",
- .start = 0x04480000,
- .end = 0x044800FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "m66592_udc",
- .id = 0, /* "usbf0" clock */
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct siu_platform siu_platform_data = {
- .dma_slave_tx_a = SHDMA_SLAVE_SIUA_TX,
- .dma_slave_rx_a = SHDMA_SLAVE_SIUA_RX,
- .dma_slave_tx_b = SHDMA_SLAVE_SIUB_TX,
- .dma_slave_rx_b = SHDMA_SLAVE_SIUB_RX,
-};
-
-static struct resource siu_resources[] = {
- [0] = {
- .start = 0xa4540000,
- .end = 0xa454c10f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device siu_device = {
- .name = "siu-pcm-audio",
- .id = -1,
- .dev = {
- .platform_data = &siu_platform_data,
- },
- .resource = siu_resources,
- .num_resources = ARRAY_SIZE(siu_resources),
-};
-
-static struct platform_device *sh7722_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usbf_device,
- &iic_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
- &siu_device,
- &dma_device,
-};
-
-static int __init sh7722_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7722_devices,
- ARRAY_SIZE(sh7722_devices));
-}
-arch_initcall(sh7722_devices_setup);
-
-static struct platform_device *sh7722_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7722_early_devices,
- ARRAY_SIZE(sh7722_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- VPU, TPU,
- USB_USBI0, USB_USBI1,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- CMT, TSIF, SIU, TWODG,
- TMU0, TMU1, TMU2,
- IRDA, JPU, LCDC,
-
- /* interrupt groups */
- SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(SIM_ERI, 0x700), INTC_VECT(SIM_RXI, 0x720),
- INTC_VECT(SIM_TXI, 0x740), INTC_VECT(SIM_TEI, 0x760),
- INTC_VECT(RTC_ATI, 0x780), INTC_VECT(RTC_PRI, 0x7a0),
- INTC_VECT(RTC_CUI, 0x7c0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(VPU, 0x980), INTC_VECT(TPU, 0x9a0),
- INTC_VECT(USB_USBI0, 0xa20), INTC_VECT(USB_USBI1, 0xa40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SIOF0, 0xc80),
- INTC_VECT(SIOF1, 0xca0), INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(IRDA, 0x480),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(USB, USB_USBI0, USB_USBI1),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, 0, SCIF2, SCIF1, SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, 0, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, RTC_CUI, RTC_PRI, RTC_ATI, 0, TPU, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7722",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
deleted file mode 100644
index 83ae1ad4a86e86..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Setup
- *
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7723.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU2H0",
- .start = 0xfe920000,
- .end = 0xfe92027b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU2H1",
- .start = 0xfe924000,
- .end = 0xfe92427b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7723_usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7723_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
- .resource = sh7723_usb_host_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct platform_device *sh7723_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &iic_device,
- &sh7723_usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7723_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7723_devices,
- ARRAY_SIZE(sh7723_devices));
-}
-arch_initcall(sh7723_devices_setup);
-
-static struct platform_device *sh7723_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7723_early_devices,
- ARRAY_SIZE(sh7723_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
- _2DG_TRI,_2DG_INI,_2DG_CEI,
- DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
- VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
- SCIFA_SCIFA0,
- VPU_VPUI,
- TPU_TPUI,
- ADC_ADI,
- USB_USI0,
- RTC_ATI,RTC_PRI,RTC_CUI,
- DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
- DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
- KEYSC_KEYI,
- SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
- MSIOF_MSIOFI0,MSIOF_MSIOFI1,
- SCIFA_SCIFA1,
- FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
- I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
- CMT_CMTI,
- TSIF_TSIFI,
- SIU_SIUI,
- SCIFA_SCIFA2,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA_IRDAI,
- ATAPI_ATAPII,
- VEU2H1_VEU2HI,
- LCDC_LCDCI,
- TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
- SDHI1, RTC, DMAC1B, SDHI0,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0,0x700),
- INTC_VECT(DMAC1A_DEI1,0x720),
- INTC_VECT(DMAC1A_DEI2,0x740),
- INTC_VECT(DMAC1A_DEI3,0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0,0x800),
- INTC_VECT(DMAC0A_DEI1,0x820),
- INTC_VECT(DMAC0A_DEI2,0x840),
- INTC_VECT(DMAC0A_DEI3,0x860),
-
- INTC_VECT(VIO_CEUI,0x880),
- INTC_VECT(VIO_BEUI,0x8A0),
- INTC_VECT(VIO_VEU2HI,0x8C0),
- INTC_VECT(VIO_VOUI,0x8E0),
-
- INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x980),
- INTC_VECT(TPU_TPUI,0x9A0),
- INTC_VECT(ADC_ADI,0x9E0),
- INTC_VECT(USB_USI0,0xA20),
-
- INTC_VECT(RTC_ATI,0xA80),
- INTC_VECT(RTC_PRI,0xAA0),
- INTC_VECT(RTC_CUI,0xAC0),
-
- INTC_VECT(DMAC1B_DEI4,0xB00),
- INTC_VECT(DMAC1B_DEI5,0xB20),
- INTC_VECT(DMAC1B_DADERR,0xB40),
-
- INTC_VECT(DMAC0B_DEI4,0xB80),
- INTC_VECT(DMAC0B_DEI5,0xBA0),
- INTC_VECT(DMAC0B_DADERR,0xBC0),
-
- INTC_VECT(KEYSC_KEYI,0xBE0),
- INTC_VECT(SCIF_SCIF0,0xC00),
- INTC_VECT(SCIF_SCIF1,0xC20),
- INTC_VECT(SCIF_SCIF2,0xC40),
- INTC_VECT(MSIOF_MSIOFI0,0xC80),
- INTC_VECT(MSIOF_MSIOFI1,0xCA0),
- INTC_VECT(SCIFA_SCIFA1,0xD00),
-
- INTC_VECT(FLCTL_FLSTEI,0xD80),
- INTC_VECT(FLCTL_FLTENDI,0xDA0),
- INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
- INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
-
- INTC_VECT(I2C_ALI,0xE00),
- INTC_VECT(I2C_TACKI,0xE20),
- INTC_VECT(I2C_WAITI,0xE40),
- INTC_VECT(I2C_DTEI,0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
-
- INTC_VECT(CMT_CMTI,0xF00),
- INTC_VECT(TSIF_TSIFI,0xF20),
- INTC_VECT(SIU_SIUI,0xF80),
- INTC_VECT(SCIFA_SCIFA2,0xFA0),
-
- INTC_VECT(TMU0_TUNI0,0x400),
- INTC_VECT(TMU0_TUNI1,0x420),
- INTC_VECT(TMU0_TUNI2,0x440),
-
- INTC_VECT(IRDA_IRDAI,0x480),
- INTC_VECT(ATAPI_ATAPII,0x4A0),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(VEU2H1_VEU2HI,0x560),
- INTC_VECT(LCDC_LCDCI,0x580),
-
- INTC_VECT(TMU1_TUNI0,0x920),
- INTC_VECT(TMU1_TUNI1,0x940),
- INTC_VECT(TMU1_TUNI2,0x960),
-
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
- INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
- INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
- INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
- INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
- INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { 0, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA_SCIFA2, SIU_SIUI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7723",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
deleted file mode 100644
index 0d990ab1ba2a9e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ /dev/null
@@ -1,1288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Setup
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Setup
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/notifier.h>
-
-#include <asm/suspend.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7724.h>
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0xa4e30020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2d,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0xa4e30024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2e,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0xa4e40020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x31,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0xa4e40024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x32,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_TX,
- .addr = 0xa4e50020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x35,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_RX,
- .addr = 0xa4e50024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x36,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_TX,
- .addr = 0xA4D80100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_RX,
- .addr = 0xA4D80100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_TX,
- .addr = 0xA4D80120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_RX,
- .addr = 0xA4D80120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_TX,
- .addr = 0xA4D90100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_RX,
- .addr = 0xA4D90100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_TX,
- .addr = 0xA4D90120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_RX,
- .addr = 0xA4D90120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_TX,
- .addr = 0x04cf0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc9,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_RX,
- .addr = 0x04cf0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xca,
- },
-};
-
-static const struct sh_dmae_channel sh7724_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7724_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7724_dmae_slaves),
- .channel = sh7724_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7724_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae1_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfdc08020,
- .end = 0xfdc0808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfdc09000,
- .end = 0xfdc0900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xb40),
- .end = evt2irq(0xb40),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x700),
- .end = evt2irq(0x760),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb00),
- .end = evt2irq(0xb20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7724_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae0_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7724_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae1_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C0 */
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-/* I2C1 */
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd80),
- .end = evt2irq(0xde0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
- .name = "VPU5F",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
- .name = "VEU3F0",
- .version = "0",
- .irq = evt2irq(0xc60),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU3F0",
- .start = 0xfe920000,
- .end = 0xfe9200cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
- .name = "VEU3F1",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU3F1",
- .start = 0xfe924000,
- .end = 0xfe9240cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-/* BEU0 */
-static struct uio_info beu0_platform_data = {
- .name = "BEU0",
- .version = "0",
- .irq = evt2irq(0x8A0),
-};
-
-static struct resource beu0_resources[] = {
- [0] = {
- .name = "BEU0",
- .start = 0xfe930000,
- .end = 0xfe933400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 6,
- .dev = {
- .platform_data = &beu0_platform_data,
- },
- .resource = beu0_resources,
- .num_resources = ARRAY_SIZE(beu0_resources),
-};
-
-/* BEU1 */
-static struct uio_info beu1_platform_data = {
- .name = "BEU1",
- .version = "0",
- .irq = evt2irq(0xA00),
-};
-
-static struct resource beu1_resources[] = {
- [0] = {
- .name = "BEU1",
- .start = 0xfe940000,
- .end = 0xfe943400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 7,
- .dev = {
- .platform_data = &beu1_platform_data,
- },
- .resource = beu1_resources,
- .num_resources = ARRAY_SIZE(beu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfe980000,
- .end = 0xfe9902d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 3,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
- .name = "SPU2DSP0",
- .version = "0",
- .irq = evt2irq(0xcc0),
-};
-
-static struct resource spu0_resources[] = {
- [0] = {
- .name = "SPU2DSP0",
- .start = 0xFE200000,
- .end = 0xFE2FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 4,
- .dev = {
- .platform_data = &spu0_platform_data,
- },
- .resource = spu0_resources,
- .num_resources = ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
- .name = "SPU2DSP1",
- .version = "0",
- .irq = evt2irq(0xce0),
-};
-
-static struct resource spu1_resources[] = {
- [0] = {
- .name = "SPU2DSP1",
- .start = 0xFE300000,
- .end = 0xFE3FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 5,
- .dev = {
- .platform_data = &spu1_platform_data,
- },
- .resource = spu1_resources,
- .num_resources = ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7724_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
- &rtc_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
- &beu0_device,
- &beu1_device,
- &jpu_device,
- &spu0_device,
- &spu1_device,
-};
-
-static int __init sh7724_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
- platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
- platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
-
- return platform_add_devices(sh7724_devices,
- ARRAY_SIZE(sh7724_devices));
-}
-arch_initcall(sh7724_devices_setup);
-
-static struct platform_device *sh7724_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7724_early_devices,
- ARRAY_SIZE(sh7724_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
- _2DG_TRI, _2DG_INI, _2DG_CEI,
- DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
- VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU,
- SCIFA3,
- VPU,
- TPU,
- CEU1,
- BEU1,
- USB0, USB1,
- ATAPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
- DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
- KEYSC,
- SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
- VEU0,
- MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- SPU_SPUI0, SPU_SPUI1,
- SCIFA4,
- ICB,
- ETHI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- CMT,
- TSIF,
- FSI,
- SCIFA5,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA,
- JPU,
- _2DDMAC,
- MMC_MMC2I, MMC_MMC3I,
- LCDC,
- TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, _2DG, DMAC0A, VIO, USB, RTC,
- DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0, 0x700),
- INTC_VECT(DMAC1A_DEI1, 0x720),
- INTC_VECT(DMAC1A_DEI2, 0x740),
- INTC_VECT(DMAC1A_DEI3, 0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0, 0x800),
- INTC_VECT(DMAC0A_DEI1, 0x820),
- INTC_VECT(DMAC0A_DEI2, 0x840),
- INTC_VECT(DMAC0A_DEI3, 0x860),
-
- INTC_VECT(VIO_CEU0, 0x880),
- INTC_VECT(VIO_BEU0, 0x8A0),
- INTC_VECT(VIO_VEU1, 0x8C0),
- INTC_VECT(VIO_VOU, 0x8E0),
-
- INTC_VECT(SCIFA3, 0x900),
- INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9A0),
- INTC_VECT(CEU1, 0x9E0),
- INTC_VECT(BEU1, 0xA00),
- INTC_VECT(USB0, 0xA20),
- INTC_VECT(USB1, 0xA40),
- INTC_VECT(ATAPI, 0xA60),
-
- INTC_VECT(RTC_ATI, 0xA80),
- INTC_VECT(RTC_PRI, 0xAA0),
- INTC_VECT(RTC_CUI, 0xAC0),
-
- INTC_VECT(DMAC1B_DEI4, 0xB00),
- INTC_VECT(DMAC1B_DEI5, 0xB20),
- INTC_VECT(DMAC1B_DADERR, 0xB40),
-
- INTC_VECT(DMAC0B_DEI4, 0xB80),
- INTC_VECT(DMAC0B_DEI5, 0xBA0),
- INTC_VECT(DMAC0B_DADERR, 0xBC0),
-
- INTC_VECT(KEYSC, 0xBE0),
- INTC_VECT(SCIF_SCIF0, 0xC00),
- INTC_VECT(SCIF_SCIF1, 0xC20),
- INTC_VECT(SCIF_SCIF2, 0xC40),
- INTC_VECT(VEU0, 0xC60),
- INTC_VECT(MSIOF_MSIOFI0, 0xC80),
- INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
- INTC_VECT(SPU_SPUI0, 0xCC0),
- INTC_VECT(SPU_SPUI1, 0xCE0),
- INTC_VECT(SCIFA4, 0xD00),
-
- INTC_VECT(ICB, 0xD20),
- INTC_VECT(ETHI, 0xD60),
-
- INTC_VECT(I2C1_ALI, 0xD80),
- INTC_VECT(I2C1_TACKI, 0xDA0),
- INTC_VECT(I2C1_WAITI, 0xDC0),
- INTC_VECT(I2C1_DTEI, 0xDE0),
-
- INTC_VECT(I2C0_ALI, 0xE00),
- INTC_VECT(I2C0_TACKI, 0xE20),
- INTC_VECT(I2C0_WAITI, 0xE40),
- INTC_VECT(I2C0_DTEI, 0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
- INTC_VECT(SDHI0, 0xEE0),
-
- INTC_VECT(CMT, 0xF00),
- INTC_VECT(TSIF, 0xF20),
- INTC_VECT(FSI, 0xF80),
- INTC_VECT(SCIFA5, 0xFA0),
-
- INTC_VECT(TMU0_TUNI0, 0x400),
- INTC_VECT(TMU0_TUNI1, 0x420),
- INTC_VECT(TMU0_TUNI2, 0x440),
-
- INTC_VECT(IRDA, 0x480),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(JPU, 0x560),
- INTC_VECT(_2DDMAC, 0x4A0),
-
- INTC_VECT(MMC_MMC2I, 0x5A0),
- INTC_VECT(MMC_MMC3I, 0x5C0),
-
- INTC_VECT(LCDC, 0xF40),
-
- INTC_VECT(TMU1_TUNI0, 0x920),
- INTC_VECT(TMU1_TUNI1, 0x940),
- INTC_VECT(TMU1_TUNI2, 0x960),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
- INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI),
- INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU),
- INTC_GROUP(USB, USB0, USB1),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
- INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
- DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, ATAPI, ETHI, 0, SCIFA3 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
- SPU_SPUI1, SPU_SPUI0, BEU1, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
- JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
- VEU0, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, ICB, SCIFA4,
- CEU1, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA5, FSI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
- 0, RTC_CUI, RTC_PRI, RTC_ATI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, _2DG_CEI, _2DG_INI, _2DG_TRI,
- 0, TPU, 0, TSIF } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0, 0, MMC_MMC3I, MMC_MMC2I, 0, 0, 0, _2DDMAC } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
- TMU0_TUNI2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, DMAC1A, BEU1 } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
- TMU1_TUNI2, SPU } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMCIF, 0, ATAPI } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA3, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC0B, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
- SCIF_SCIF2, VEU0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- I2C1, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA4, ICB, TSIF, _2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU1, ETHI, FSI, SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, 0, SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA5, 0, TPU, _2DDMAC } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7724",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct {
- /* BSC */
- unsigned long mmselr;
- unsigned long cs0bcr;
- unsigned long cs4bcr;
- unsigned long cs5abcr;
- unsigned long cs5bbcr;
- unsigned long cs6abcr;
- unsigned long cs6bbcr;
- unsigned long cs4wcr;
- unsigned long cs5awcr;
- unsigned long cs5bwcr;
- unsigned long cs6awcr;
- unsigned long cs6bwcr;
- /* INTC */
- unsigned short ipra;
- unsigned short iprb;
- unsigned short iprc;
- unsigned short iprd;
- unsigned short ipre;
- unsigned short iprf;
- unsigned short iprg;
- unsigned short iprh;
- unsigned short ipri;
- unsigned short iprj;
- unsigned short iprk;
- unsigned short iprl;
- unsigned char imr0;
- unsigned char imr1;
- unsigned char imr2;
- unsigned char imr3;
- unsigned char imr4;
- unsigned char imr5;
- unsigned char imr6;
- unsigned char imr7;
- unsigned char imr8;
- unsigned char imr9;
- unsigned char imr10;
- unsigned char imr11;
- unsigned char imr12;
- /* RWDT */
- unsigned short rwtcnt;
- unsigned short rwtcsr;
- /* CPG */
- unsigned long irdaclk;
- unsigned long spuclk;
-} sh7724_rstandby_state;
-
-static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
- sh7724_rstandby_state.mmselr |= 0xa5a50000;
- sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
- sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
- sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
- sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
- sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
- sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
- sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
- sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
- sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
- sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
- sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
-
- /* INTC */
- sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
- sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
- sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
- sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
- sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
- sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
- sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
- sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
- sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
- sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
- sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
- sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
- sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
- sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
- sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
- sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
- sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
- sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
- sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
- sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
- sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
- sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
- sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
- sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
- sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
-
- /* RWDT */
- sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
- sh7724_rstandby_state.rwtcnt |= 0x5a00;
- sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
- sh7724_rstandby_state.rwtcsr |= 0xa500;
- __raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
-
- /* CPG */
- sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
- sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- __raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
- __raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
- __raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
- __raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
- __raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
- __raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
- __raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
- __raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
- __raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
- __raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
- __raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
- __raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
-
- /* INTC */
- __raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
- __raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
- __raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
- __raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
- __raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
- __raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
- __raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
- __raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
- __raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
- __raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
- __raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
- __raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
- __raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
- __raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
- __raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
- __raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
- __raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
- __raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
- __raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
- __raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
- __raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
- __raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
- __raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
- __raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
- __raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
-
- /* RWDT */
- __raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
- __raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
-
- /* CPG */
- __raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
- __raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block sh7724_pre_sleep_notifier = {
- .notifier_call = sh7724_pre_sleep_notifier_call,
- .priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
-};
-
-static struct notifier_block sh7724_post_sleep_notifier = {
- .notifier_call = sh7724_post_sleep_notifier_call,
- .priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
-};
-
-static int __init sh7724_sleep_setup(void)
-{
- atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
- &sh7724_pre_sleep_notifier);
-
- atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
- &sh7724_post_sleep_notifier);
- return 0;
-}
-arch_initcall(sh7724_sleep_setup);
-
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
deleted file mode 100644
index 9911da794358d0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+++ /dev/null
@@ -1,621 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/setup-sh7734.c
- *
- * SH7734 Setup
- *
- * Copyright (C) 2011,2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011,2012 Renesas Solutions Corp.
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/irq.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7734.h>
-
-/* SCIF */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe41000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe42000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x920)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffe44000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x940)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .name = "rtc",
- .start = 0xFFFC5000,
- .end = 0xFFFC5000 + 0x26 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0xC00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C 0 */
-static struct resource i2c0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0xFFC70000,
- .end = 0xFFC7000A - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c0_device = {
- .name = "i2c-sh7734",
- .id = 0,
- .num_resources = ARRAY_SIZE(i2c0_resources),
- .resource = i2c0_resources,
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x500)),
- DEFINE_RES_IRQ(evt2irq(0x520)),
- DEFINE_RES_IRQ(evt2irq(0x540)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7734_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &rtc_device,
-};
-
-static struct platform_device *sh7734_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7734_early_devices,
- ARRAY_SIZE(sh7734_early_devices));
-}
-
-#define GROUP 0
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3,
- DU,
- TMU00, TMU10, TMU20, TMU21,
- TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU70, TMU80,
- RESET_WDT,
- USB,
- HUDI,
- SHDMAC,
- SSI0, SSI1, SSI2, SSI3,
- VIN0,
- RGPVG,
- _2DG,
- MMC,
- HSPI,
- LBSCATA,
- I2C0,
- RCAN0,
- MIMLB,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- LBSCDMAC0, LBSCDMAC1, LBSCDMAC2,
- RCAN1,
- SDHI0, SDHI1,
- IEBUS,
- HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22, HPBDMAC23_25_27_28,
- RTC,
- VIN1,
- LCDC,
- SRC0, SRC1,
- GETHER,
- SDHI2,
- GPIO0_3, GPIO4_5,
- STIF0, STIF1,
- ADMAC,
- HIF,
- FLCTL,
- ADC,
- MTU2,
- RSPI,
- QSPI,
- HSCIF,
- VEU3F_VE3,
-
- /* Group */
- /* Mask */
- STIF_M,
- GPIO_M,
- HPBDMAC_M,
- LBSCDMAC_M,
- RCAN_M,
- SRC_M,
- SCIF_M,
- LCDC_M,
- _2DG_M,
- VIN_M,
- TMU_3_M,
- TMU_0_M,
-
- /* Priority */
- RCAN_P,
- LBSCDMAC_P,
-
- /* Common */
- SDHI,
- SSI,
- SPI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(DU, 0x3E0),
- INTC_VECT(TMU00, 0x400),
- INTC_VECT(TMU10, 0x420),
- INTC_VECT(TMU20, 0x440),
- INTC_VECT(TMU30, 0x480),
- INTC_VECT(TMU40, 0x4A0),
- INTC_VECT(TMU50, 0x4C0),
- INTC_VECT(TMU51, 0x4E0),
- INTC_VECT(TMU60, 0x500),
- INTC_VECT(TMU70, 0x520),
- INTC_VECT(TMU80, 0x540),
- INTC_VECT(RESET_WDT, 0x560),
- INTC_VECT(USB, 0x580),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(SHDMAC, 0x620),
- INTC_VECT(SSI0, 0x6C0),
- INTC_VECT(SSI1, 0x6E0),
- INTC_VECT(SSI2, 0x700),
- INTC_VECT(SSI3, 0x720),
- INTC_VECT(VIN0, 0x740),
- INTC_VECT(RGPVG, 0x760),
- INTC_VECT(_2DG, 0x780),
- INTC_VECT(MMC, 0x7A0),
- INTC_VECT(HSPI, 0x7E0),
- INTC_VECT(LBSCATA, 0x840),
- INTC_VECT(I2C0, 0x860),
- INTC_VECT(RCAN0, 0x880),
- INTC_VECT(SCIF0, 0x8A0),
- INTC_VECT(SCIF1, 0x8C0),
- INTC_VECT(SCIF2, 0x900),
- INTC_VECT(SCIF3, 0x920),
- INTC_VECT(SCIF4, 0x940),
- INTC_VECT(SCIF5, 0x960),
- INTC_VECT(LBSCDMAC0, 0x9E0),
- INTC_VECT(LBSCDMAC1, 0xA00),
- INTC_VECT(LBSCDMAC2, 0xA20),
- INTC_VECT(RCAN1, 0xA60),
- INTC_VECT(SDHI0, 0xAE0),
- INTC_VECT(SDHI1, 0xB00),
- INTC_VECT(IEBUS, 0xB20),
- INTC_VECT(HPBDMAC0_3, 0xB60),
- INTC_VECT(HPBDMAC4_10, 0xB80),
- INTC_VECT(HPBDMAC11_18, 0xBA0),
- INTC_VECT(HPBDMAC19_22, 0xBC0),
- INTC_VECT(HPBDMAC23_25_27_28, 0xBE0),
- INTC_VECT(RTC, 0xC00),
- INTC_VECT(VIN1, 0xC20),
- INTC_VECT(LCDC, 0xC40),
- INTC_VECT(SRC0, 0xC60),
- INTC_VECT(SRC1, 0xC80),
- INTC_VECT(GETHER, 0xCA0),
- INTC_VECT(SDHI2, 0xCC0),
- INTC_VECT(GPIO0_3, 0xCE0),
- INTC_VECT(GPIO4_5, 0xD00),
- INTC_VECT(STIF0, 0xD20),
- INTC_VECT(STIF1, 0xD40),
- INTC_VECT(ADMAC, 0xDA0),
- INTC_VECT(HIF, 0xDC0),
- INTC_VECT(FLCTL, 0xDE0),
- INTC_VECT(ADC, 0xE00),
- INTC_VECT(MTU2, 0xE20),
- INTC_VECT(RSPI, 0xE40),
- INTC_VECT(QSPI, 0xE60),
- INTC_VECT(HSCIF, 0xFC0),
- INTC_VECT(VEU3F_VE3, 0xF40),
-};
-
-static struct intc_group groups[] __initdata = {
- /* Common */
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2),
- INTC_GROUP(SPI, HSPI, RSPI, QSPI),
- INTC_GROUP(SSI, SSI0, SSI1, SSI2, SSI3),
-
- /* Mask group */
- INTC_GROUP(STIF_M, STIF0, STIF1), /* 22 */
- INTC_GROUP(GPIO_M, GPIO0_3, GPIO4_5), /* 21 */
- INTC_GROUP(HPBDMAC_M, HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18,
- HPBDMAC19_22, HPBDMAC23_25_27_28), /* 19 */
- INTC_GROUP(LBSCDMAC_M, LBSCDMAC0, LBSCDMAC1, LBSCDMAC2), /* 18 */
- INTC_GROUP(RCAN_M, RCAN0, RCAN1, IEBUS), /* 17 */
- INTC_GROUP(SRC_M, SRC0, SRC1), /* 16 */
- INTC_GROUP(SCIF_M, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- HSCIF), /* 14 */
- INTC_GROUP(LCDC_M, LCDC, MIMLB), /* 13 */
- INTC_GROUP(_2DG_M, _2DG, RGPVG), /* 12 */
- INTC_GROUP(VIN_M, VIN0, VIN1), /* 10 */
- INTC_GROUP(TMU_3_M, TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU60, TMU70, TMU80), /* 2 */
- INTC_GROUP(TMU_0_M, TMU00, TMU10, TMU20, TMU21), /* 1 */
-
- /* Priority group*/
- INTC_GROUP(RCAN_P, RCAN0, RCAN1), /* INT2PRI5 */
- INTC_GROUP(LBSCDMAC_P, LBSCDMAC0, LBSCDMAC1), /* INT2PRI5 */
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xFF804040, 0xFF804044, 32, /* INT2MSKRG / INT2MSKCR */
- { 0,
- VEU3F_VE3,
- SDHI, /* SDHI 0-2 */
- ADMAC,
- FLCTL,
- RESET_WDT,
- HIF,
- ADC,
- MTU2,
- STIF_M, /* STIF 0,1 */
- GPIO_M, /* GPIO 0-5*/
- GETHER,
- HPBDMAC_M, /* HPBDMAC 0_3 - 23_25_27_28 */
- LBSCDMAC_M, /* LBSCDMAC 0 - 2 */
- RCAN_M, /* RCAN, IEBUS */
- SRC_M, /* SRC 0,1 */
- LBSCATA,
- SCIF_M, /* SCIF 0-5, HSCIF */
- LCDC_M, /* LCDC, MIMLB */
- _2DG_M, /* 2DG, RGPVG */
- SPI, /* HSPI, RSPI, QSPI */
- VIN_M, /* VIN0, 1 */
- SSI, /* SSI 0-3 */
- USB,
- SHDMAC,
- HUDI,
- MMC,
- RTC,
- I2C0, /* I2C */ /* I2C 0, 1*/
- TMU_3_M, /* TMU30 - TMU80 */
- TMU_0_M, /* TMU00 - TMU21 */
- DU } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xFF804000, 0, 32, 8, /* INT2PRI0 */
- { DU, TMU00, TMU10, TMU20 } },
- { 0xFF804004, 0, 32, 8, /* INT2PRI1 */
- { TMU30, TMU60, RTC, SDHI } },
- { 0xFF804008, 0, 32, 8, /* INT2PRI2 */
- { HUDI, SHDMAC, USB, SSI } },
- { 0xFF80400C, 0, 32, 8, /* INT2PRI3 */
- { VIN0, SPI, _2DG, LBSCATA } },
- { 0xFF804010, 0, 32, 8, /* INT2PRI4 */
- { SCIF0, SCIF3, HSCIF, LCDC } },
- { 0xFF804014, 0, 32, 8, /* INT2PRI5 */
- { RCAN_P, LBSCDMAC_P, LBSCDMAC2, MMC } },
- { 0xFF804018, 0, 32, 8, /* INT2PRI6 */
- { HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22 } },
- { 0xFF80401C, 0, 32, 8, /* INT2PRI7 */
- { HPBDMAC23_25_27_28, I2C0, SRC0, SRC1 } },
- { 0xFF804020, 0, 32, 8, /* INT2PRI8 */
- { 0 /* ADIF */, VIN1, RESET_WDT, HIF } },
- { 0xFF804024, 0, 32, 8, /* INT2PRI9 */
- { ADMAC, FLCTL, GPIO0_3, GPIO4_5 } },
- { 0xFF804028, 0, 32, 8, /* INT2PRI10 */
- { STIF0, STIF1, VEU3F_VE3, GETHER } },
- { 0xFF80402C, 0, 32, 8, /* INT2PRI11 */
- { MTU2, RGPVG, MIMLB, IEBUS } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7734", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq3210_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2C0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg irq3210_sense_registers[] __initdata = {
- { 0xFF80201C, 32, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_ack_registers[] __initdata = {
- { 0xFF802024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_mask_registers[] __initdata = {
- { 0xFF802044, 0xFF802064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_prio_reg irq3210_prio_registers[] __initdata = {
- { 0xFF802010, 0, 32, 4, /* INTPRI */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq3210, "sh7734-irq3210",
- irq3210_vectors, NULL,
- irq3210_mask_registers, irq3210_prio_registers,
- irq3210_sense_registers, irq3210_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl3210[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl3210, "sh7734-irl3210",
- vectors_irl3210, NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xFF802000
-#define INTC_INTMSK0 0xFF802044
-#define INTC_INTMSK1 0xFF802048
-#define INTC_INTMSKCLR0 0xFF802064
-#define INTC_INTMSKCLR1 0xFF802068
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 */
- __raw_writel(0xF0000000, INTC_INTMSK0);
-
- /* disable IRL3-0 */
- __raw_writel(0x80000000, INTC_INTMSK1);
-
- /* select IRL mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00800000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode (LVLMODE)" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq3210);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xf0000000, INTC_INTMSKCLR0);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR0);
- register_intc_controller(&intc_desc_irl3210);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
deleted file mode 100644
index 67e330b7ea4621..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ /dev/null
@@ -1,1242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 Setup
- *
- * Copyright (C) 2009, 2011 Renesas Solutions Corp.
- *
- * based on setup-sh7785.c : Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <cpu/sh7757.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe4b0000, 0x100), /* SCIF2 */
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe4c0000, 0x100), /* SCIF3 */
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfe4d0000, 0x100), /* SCIF4 */
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfe430000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = 0xfe002000,
- .end = 0xfe0020ff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
- [1] = {
- .start = evt2irq(0xcc0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SDHI_TX,
- .addr = 0x1fe50030,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_SDHI_RX,
- .addr = 0x1fe50030,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc6,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- .addr = 0x1fcb0034,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd3,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- .addr = 0x1fcb0034,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd7,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0x1f4b000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0x1f4b0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0x1f4c000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0x1f4c0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0x1f4d000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0x1f4d0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_TX,
- .addr = 0xfe480004,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_RX,
- .addr = 0xfe480004,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC0_TX,
- .addr = 0x1e500012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC0_RX,
- .addr = 0x1e500013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_TX,
- .addr = 0x1e510012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_RX,
- .addr = 0x1e510013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_TX,
- .addr = 0x1e520012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa1,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_RX,
- .addr = 0x1e520013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa2,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_TX,
- .addr = 0x1e530012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa9,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_RX,
- .addr = 0x1e530013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xaf,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_TX,
- .addr = 0x1e540012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_RX,
- .addr = 0x1e540013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc6,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC5_TX,
- .addr = 0x1e550012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC5_RX,
- .addr = 0x1e550013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_TX,
- .addr = 0x1e560012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_RX,
- .addr = 0x1e560013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_TX,
- .addr = 0x1e570012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_RX,
- .addr = 0x1e570013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_TX,
- .addr = 0x1e580012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x45,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_RX,
- .addr = 0x1e580013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x46,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_TX,
- .addr = 0x1e590012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x51,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_RX,
- .addr = 0x1e590013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x52,
- },
-};
-
-static const struct sh_dmae_channel sh7757_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .slave = sh7757_dmae0_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae0_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .slave = sh7757_dmae1_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae1_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma2_platform_data = {
- .slave = sh7757_dmae2_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae2_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma3_platform_data = {
- .slave = sh7757_dmae3_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae3_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* channel 0 to 5 */
-static struct resource sh7757_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff608020,
- .end = 0xff60808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff609000,
- .end = 0xff60900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 6 to 11 */
-static struct resource sh7757_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff618020,
- .end = 0xff61808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff619000,
- .end = 0xff61900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 4 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 5 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 6 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 7 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 8 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 9 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 10 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 11 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 12 to 17 */
-static struct resource sh7757_dmae2_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff708020,
- .end = 0xff70808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff709000,
- .end = 0xff70900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a60),
- .end = evt2irq(0x2a60),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 12 to 16 */
- .start = evt2irq(0x2400),
- .end = evt2irq(0x2480),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 17 */
- .start = evt2irq(0x24e0),
- .end = evt2irq(0x24e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* channel 18 to 23 */
-static struct resource sh7757_dmae3_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff718020,
- .end = 0xff71808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff719000,
- .end = 0xff71900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a80),
- .end = evt2irq(0x2a80),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 18 to 22 */
- .start = evt2irq(0x2500),
- .end = evt2irq(0x2580),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 23 */
- .start = evt2irq(0x2600),
- .end = evt2irq(0x2600),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7757_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7757_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device dma2_device = {
- .name = "sh-dma-engine",
- .id = 2,
- .resource = sh7757_dmae2_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae2_resources),
- .dev = {
- .platform_data = &dma2_platform_data,
- },
-};
-
-static struct platform_device dma3_device = {
- .name = "sh-dma-engine",
- .id = 3,
- .resource = sh7757_dmae3_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae3_resources),
- .dev = {
- .platform_data = &dma3_platform_data,
- },
-};
-
-static struct platform_device spi0_device = {
- .name = "sh_spi",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(spi0_resources),
- .resource = spi0_resources,
-};
-
-static struct resource spi1_resources[] = {
- {
- .start = 0xffd8ee70,
- .end = 0xffd8eeff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- {
- .start = evt2irq(0x8c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device spi1_device = {
- .name = "sh_spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(spi1_resources),
- .resource = spi1_resources,
-};
-
-static struct resource rspi_resources[] = {
- {
- .start = 0xfe480000,
- .end = 0xfe4800ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = evt2irq(0x1d80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rspi_device = {
- .name = "rspi",
- .id = 2,
- .num_resources = ARRAY_SIZE(rspi_resources),
- .resource = rspi_resources,
-};
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = 0xfe4f1000,
- .end = 0xfe4f10ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xfe4f1800,
- .end = 0xfe4f18ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7757_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
- &dma0_device,
- &dma1_device,
- &dma2_device,
- &dma3_device,
- &spi0_device,
- &spi1_device,
- &rspi_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-static int __init sh7757_devices_setup(void)
-{
- return platform_add_devices(sh7757_devices,
- ARRAY_SIZE(sh7757_devices));
-}
-arch_initcall(sh7757_devices_setup);
-
-static struct platform_device *sh7757_early_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7757_early_devices,
- ARRAY_SIZE(sh7757_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-
- SDHI, DVC,
- IRQ8, IRQ9, IRQ11, IRQ10, IRQ12, IRQ13, IRQ14, IRQ15,
- TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- HUDI,
- ARC4,
- DMAC0_5, DMAC6_7, DMAC8_11,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4,
- USB0, USB1,
- JMC,
- SPI0, SPI1,
- TMR01, TMR23, TMR45,
- FRT,
- LPC, LPC5, LPC6, LPC7, LPC8,
- PECI0, PECI1, PECI2, PECI3, PECI4, PECI5,
- ETHERC,
- ADC0, ADC1,
- SIM,
- IIC0_0, IIC0_1, IIC0_2, IIC0_3,
- IIC1_0, IIC1_1, IIC1_2, IIC1_3,
- IIC2_0, IIC2_1, IIC2_2, IIC2_3,
- IIC3_0, IIC3_1, IIC3_2, IIC3_3,
- IIC4_0, IIC4_1, IIC4_2, IIC4_3,
- IIC5_0, IIC5_1, IIC5_2, IIC5_3,
- IIC6_0, IIC6_1, IIC6_2, IIC6_3,
- IIC7_0, IIC7_1, IIC7_2, IIC7_3,
- IIC8_0, IIC8_1, IIC8_2, IIC8_3,
- IIC9_0, IIC9_1, IIC9_2, IIC9_3,
- ONFICTL,
- MMC1, MMC2,
- ECCU,
- PCIC,
- G200,
- RSPI,
- SGPIO,
- DMINT12, DMINT13, DMINT14, DMINT15, DMINT16, DMINT17, DMINT18, DMINT19,
- DMINT20, DMINT21, DMINT22, DMINT23,
- DDRECC,
- TSIP,
- PCIE_BRIDGE,
- WDT0B, WDT1B, WDT2B, WDT3B, WDT4B, WDT5B, WDT6B, WDT7B, WDT8B,
- GETHER0, GETHER1, GETHER2,
- PBIA, PBIB, PBIC,
- DMAE2, DMAE3,
- SERMUX2, SERMUX3,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
- INTC_VECT(SDHI, 0x4c0),
- INTC_VECT(DVC, 0x4e0),
- INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
- INTC_VECT(IRQ10, 0x540),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(ARC4, 0x620),
- INTC_VECT(DMAC0_5, 0x640), INTC_VECT(DMAC0_5, 0x660),
- INTC_VECT(DMAC0_5, 0x680), INTC_VECT(DMAC0_5, 0x6a0),
- INTC_VECT(DMAC0_5, 0x6c0),
- INTC_VECT(IRQ11, 0x6e0),
- INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
- INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
- INTC_VECT(DMAC0_5, 0x780), INTC_VECT(DMAC0_5, 0x7a0),
- INTC_VECT(DMAC6_7, 0x7c0), INTC_VECT(DMAC6_7, 0x7e0),
- INTC_VECT(USB0, 0x840),
- INTC_VECT(IRQ12, 0x880),
- INTC_VECT(JMC, 0x8a0),
- INTC_VECT(SPI1, 0x8c0),
- INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
- INTC_VECT(USB1, 0x920),
- INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
- INTC_VECT(TMR45, 0xa40),
- INTC_VECT(FRT, 0xa80),
- INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
- INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
- INTC_VECT(LPC, 0xb20),
- INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
- INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
- INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
- INTC_VECT(PECI0, 0xc00), INTC_VECT(PECI1, 0xc20),
- INTC_VECT(PECI2, 0xc40),
- INTC_VECT(IRQ15, 0xc60),
- INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
- INTC_VECT(SPI0, 0xcc0),
- INTC_VECT(ADC1, 0xce0),
- INTC_VECT(DMAC8_11, 0xd00), INTC_VECT(DMAC8_11, 0xd20),
- INTC_VECT(DMAC8_11, 0xd40), INTC_VECT(DMAC8_11, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(ADC0, 0xe60),
- INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
- INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
- INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
- INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
- INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
- INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
- INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
- INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
- INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
- INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
- INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
- INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
- INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
- INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
- INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
- INTC_VECT(IIC6_2, 0x1920),
- INTC_VECT(ONFICTL, 0x1960),
- INTC_VECT(IIC6_3, 0x1980),
- INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
- INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
- INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
- INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
- INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
- INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
- INTC_VECT(MMC1, 0x1c60), INTC_VECT(MMC2, 0x1c80),
- INTC_VECT(ECCU, 0x1cc0),
- INTC_VECT(PCIC, 0x1ce0),
- INTC_VECT(G200, 0x1d00),
- INTC_VECT(RSPI, 0x1d80), INTC_VECT(RSPI, 0x1da0),
- INTC_VECT(RSPI, 0x1dc0), INTC_VECT(RSPI, 0x1de0),
- INTC_VECT(PECI3, 0x1ec0), INTC_VECT(PECI4, 0x1ee0),
- INTC_VECT(PECI5, 0x1f00),
- INTC_VECT(SGPIO, 0x1f80), INTC_VECT(SGPIO, 0x1fa0),
- INTC_VECT(SGPIO, 0x1fc0),
- INTC_VECT(DMINT12, 0x2400), INTC_VECT(DMINT13, 0x2420),
- INTC_VECT(DMINT14, 0x2440), INTC_VECT(DMINT15, 0x2460),
- INTC_VECT(DMINT16, 0x2480), INTC_VECT(DMINT17, 0x24e0),
- INTC_VECT(DMINT18, 0x2500), INTC_VECT(DMINT19, 0x2520),
- INTC_VECT(DMINT20, 0x2540), INTC_VECT(DMINT21, 0x2560),
- INTC_VECT(DMINT22, 0x2580), INTC_VECT(DMINT23, 0x2600),
- INTC_VECT(DDRECC, 0x2620),
- INTC_VECT(TSIP, 0x2640),
- INTC_VECT(PCIE_BRIDGE, 0x27c0),
- INTC_VECT(WDT0B, 0x2800), INTC_VECT(WDT1B, 0x2820),
- INTC_VECT(WDT2B, 0x2840), INTC_VECT(WDT3B, 0x2860),
- INTC_VECT(WDT4B, 0x2880), INTC_VECT(WDT5B, 0x28a0),
- INTC_VECT(WDT6B, 0x28c0), INTC_VECT(WDT7B, 0x28e0),
- INTC_VECT(WDT8B, 0x2900),
- INTC_VECT(GETHER0, 0x2960), INTC_VECT(GETHER1, 0x2980),
- INTC_VECT(GETHER2, 0x29a0),
- INTC_VECT(PBIA, 0x2a00), INTC_VECT(PBIB, 0x2a20),
- INTC_VECT(PBIC, 0x2a40),
- INTC_VECT(DMAE2, 0x2a60), INTC_VECT(DMAE3, 0x2a80),
- INTC_VECT(SERMUX2, 0x2aa0), INTC_VECT(SERMUX3, 0x2b40),
- INTC_VECT(LPC5, 0x2b60), INTC_VECT(LPC6, 0x2b80),
- INTC_VECT(LPC7, 0x2c00), INTC_VECT(LPC8, 0x2c20),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, DMAC8_11, 0, PECI0, LPC, FRT, 0, TMR45,
- TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0_5,
- HUDI, 0, 0, SCIF3, SCIF2, SDHI, TMU345, TMU012
- } },
-
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
- IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
- ADC1, 0, DMAC6_7, ADC0, SPI0, SIM, PECI2, PECI1,
- ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
- } },
-
- { 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
- { IIC4_1, IIC4_2, IIC5_0, ONFICTL, 0, 0, SGPIO, 0,
- 0, G200, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
- IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
- IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, 0, IIC2_2
- } },
-
- { 0xffd100d0, 0xffd100d4, 32, /* INT2MSKR3 / INT2MSKCR3 */
- { MMC1, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, PECI5, MMC2,
- IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
- PCIC, 0, IIC4_0, 0, ECCU, RSPI, 0, IIC9_3,
- IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
- } },
-
- { 0xffd20038, 0xffd2003c, 32, /* INT2MSKR4 / INT2MSKCR4 */
- { WDT0B, WDT1B, WDT3B, GETHER0, 0, 0, 0, 0,
- 0, 0, 0, LPC7, SERMUX2, DMAE3, DMAE2, PBIC,
- PBIB, PBIA, GETHER1, DMINT12, DMINT13, DMINT14, DMINT15, TSIP,
- DMINT23, 0, DMINT21, LPC6, 0, DMINT16, 0, DMINT22
- } },
-
- { 0xffd200d0, 0xffd200d4, 32, /* INT2MSKR5 / INT2MSKCR5 */
- { 0, WDT8B, WDT7B, WDT4B, 0, DMINT20, 0, 0,
- DMINT19, DMINT18, LPC5, SERMUX3, WDT2B, GETHER2, 0, 0,
- 0, 0, PCIE_BRIDGE, 0, 0, 0, 0, LPC8,
- DDRECC, 0, WDT6B, WDT5B, 0, 0, 0, DMINT17
- } },
-};
-
-#define INTPRI 0xffd00010
-#define INT2PRI0 0xffd40000
-#define INT2PRI1 0xffd40004
-#define INT2PRI2 0xffd40008
-#define INT2PRI3 0xffd4000c
-#define INT2PRI4 0xffd40010
-#define INT2PRI5 0xffd40014
-#define INT2PRI6 0xffd40018
-#define INT2PRI7 0xffd4001c
-#define INT2PRI8 0xffd400a0
-#define INT2PRI9 0xffd400a4
-#define INT2PRI10 0xffd400a8
-#define INT2PRI11 0xffd400ac
-#define INT2PRI12 0xffd400b0
-#define INT2PRI13 0xffd400b4
-#define INT2PRI14 0xffd400b8
-#define INT2PRI15 0xffd400bc
-#define INT2PRI16 0xffd10000
-#define INT2PRI17 0xffd10004
-#define INT2PRI18 0xffd10008
-#define INT2PRI19 0xffd1000c
-#define INT2PRI20 0xffd10010
-#define INT2PRI21 0xffd10014
-#define INT2PRI22 0xffd10018
-#define INT2PRI23 0xffd1001c
-#define INT2PRI24 0xffd100a0
-#define INT2PRI25 0xffd100a4
-#define INT2PRI26 0xffd100a8
-#define INT2PRI27 0xffd100ac
-#define INT2PRI28 0xffd100b0
-#define INT2PRI29 0xffd100b4
-#define INT2PRI30 0xffd100b8
-#define INT2PRI31 0xffd100bc
-#define INT2PRI32 0xffd20000
-#define INT2PRI33 0xffd20004
-#define INT2PRI34 0xffd20008
-#define INT2PRI35 0xffd2000c
-#define INT2PRI36 0xffd20010
-#define INT2PRI37 0xffd20014
-#define INT2PRI38 0xffd20018
-#define INT2PRI39 0xffd2001c
-#define INT2PRI40 0xffd200a0
-#define INT2PRI41 0xffd200a4
-#define INT2PRI42 0xffd200a8
-#define INT2PRI43 0xffd200ac
-#define INT2PRI44 0xffd200b0
-#define INT2PRI45 0xffd200b4
-#define INT2PRI46 0xffd200b8
-#define INT2PRI47 0xffd200bc
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
- { INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
- { INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, 0, IRQ8 } },
- { INT2PRI3, 0, 32, 8, { HUDI, DMAC0_5, ADC0, IRQ9 } },
- { INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
- { INT2PRI5, 0, 32, 8, { TMR45, 0, FRT, LPC } },
- { INT2PRI6, 0, 32, 8, { PECI0, ETHERC, DMAC8_11, 0 } },
- { INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
- { INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
- { INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
- { INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2, PECI1 } },
- { INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC6_7, IRQ14 } },
- { INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
- { INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
-
- { INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
- { INT2PRI17, 0, 32, 8, { 0, 0, 0, IIC1_0 } },
- { INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
- { INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
- { INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
- { INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
- { INT2PRI22, 0, 32, 8, { IIC9_2, MMC2, G200, 0 } },
- { INT2PRI23, 0, 32, 8, { PECI5, SGPIO, IIC3_2, IIC5_1 } },
- { INT2PRI24, 0, 32, 8, { PECI4, PECI3, 0, IIC1_1 } },
- { INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
- { INT2PRI26, 0, 32, 8, { ECCU, RSPI, 0, IIC9_3 } },
- { INT2PRI27, 0, 32, 8, { PCIC, IIC6_0, IIC4_0, IIC6_1 } },
- { INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, MMC1, IIC6_2 } },
- { INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
- { INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, ONFICTL } },
- { INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
- { INT2PRI32, 0, 32, 8, { DMINT22, 0, 0, 0 } },
- { INT2PRI33, 0, 32, 8, { 0, 0, 0, DMINT16 } },
- { INT2PRI34, 0, 32, 8, { 0, LPC6, DMINT21, DMINT18 } },
- { INT2PRI35, 0, 32, 8, { DMINT23, TSIP, 0, DMINT19 } },
- { INT2PRI36, 0, 32, 8, { DMINT20, GETHER1, PBIA, PBIB } },
- { INT2PRI37, 0, 32, 8, { PBIC, DMAE2, DMAE3, SERMUX2 } },
- { INT2PRI38, 0, 32, 8, { LPC7, 0, 0, 0 } },
- { INT2PRI39, 0, 32, 8, { 0, 0, 0, WDT4B } },
- { INT2PRI40, 0, 32, 8, { 0, 0, 0, DMINT17 } },
- { INT2PRI41, 0, 32, 8, { DDRECC, 0, WDT6B, WDT5B } },
- { INT2PRI42, 0, 32, 8, { 0, 0, 0, LPC8 } },
- { INT2PRI43, 0, 32, 8, { 0, WDT7B, PCIE_BRIDGE, WDT8B } },
- { INT2PRI44, 0, 32, 8, { WDT2B, GETHER2, 0, 0 } },
- { INT2PRI45, 0, 32, 8, { 0, 0, LPC5, SERMUX3 } },
- { INT2PRI46, 0, 32, 8, { WDT0B, WDT1B, WDT3B, GETHER0 } },
- { INT2PRI47, 0, 32, 8, { DMINT12, DMINT13, DMINT14, DMINT15 } },
-};
-
-static struct intc_sense_reg sense_registers_irq8to15[] __initdata = {
- { 0xffd100f8, 32, 2, /* ICR2 */ { IRQ15, IRQ14, IRQ13, IRQ12,
- IRQ11, IRQ10, IRQ9, IRQ8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
- mask_registers, prio_registers,
- sense_registers_irq8to15);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
- INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
- INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
- INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
- INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
- INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
- INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
- INTC_VECT(IRL4_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
deleted file mode 100644
index b0608664785f50..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7763 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe08000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xffec8000,
- .end = 0xffec80ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc60),
- .end = evt2irq(0xc60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd88000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *sh7763_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7763_devices_setup(void)
-{
- return platform_add_devices(sh7763_devices,
- ARRAY_SIZE(sh7763_devices));
-}
-arch_initcall(sh7763_devices_setup);
-
-static struct platform_device *sh7763_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7763_early_devices,
- ARRAY_SIZE(sh7763_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
- USBH, USBF, TPU, PCC, MMCIF, SIM,
- TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
- SCIF2, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
- INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
- INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
- INTC_VECT(LCDC, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
- INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
- INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
- INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
- INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
- INTC_VECT(USBF, 0xca0),
- INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
- INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
- INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, 0,
- SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { 0, 0, 0, 0, 0, 0, SCIF2, USBF,
- 0, 0, STIF1, STIF0, 0, 0, USBH, GETHER,
- PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1,
- LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
- { 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } },
- { 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } },
- { 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } },
- { 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } },
- { 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } },
- { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
deleted file mode 100644
index 5efec6ceb04d5c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ /dev/null
@@ -1,571 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7770 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff923000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xff924000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xff925000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xff926000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa00)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xff927000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa20)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xff928000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa40)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xff929000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa60)),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xff92a000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa80)),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct plat_sci_port scif8_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif8_resources[] = {
- DEFINE_RES_MEM(0xff92b000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xaa0)),
-};
-
-static struct platform_device scif8_device = {
- .name = "sh-sci",
- .id = 8,
- .resource = scif8_resources,
- .num_resources = ARRAY_SIZE(scif8_resources),
- .dev = {
- .platform_data = &scif8_platform_data,
- },
-};
-
-static struct plat_sci_port scif9_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif9_resources[] = {
- DEFINE_RES_MEM(0xff92c000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xac0)),
-};
-
-static struct platform_device scif9_device = {
- .name = "sh-sci",
- .id = 9,
- .resource = scif9_resources,
- .num_resources = ARRAY_SIZE(scif9_resources),
- .dev = {
- .platform_data = &scif9_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
- DEFINE_RES_IRQ(evt2irq(0x500)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7770_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-static int __init sh7770_devices_setup(void)
-{
- return platform_add_devices(sh7770_devices,
- ARRAY_SIZE(sh7770_devices));
-}
-arch_initcall(sh7770_devices_setup);
-
-static struct platform_device *sh7770_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7770_early_devices,
- ARRAY_SIZE(sh7770_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-
- GPIO,
- TMU0, TMU1, TMU2, TMU2_TICPI,
- TMU3, TMU4, TMU5, TMU5_TICPI,
- TMU6, TMU7, TMU8,
- HAC, IPI, SPDIF, HUDI, I2C,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- I2S0, I2S1, I2S2, I2S3,
- SRC_RX, SRC_TX, SRC_SPDIF,
- DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
- GFX3D_MBX, GFX3D_DMAC,
- EXBUS_ATA,
- SPI0, SPI1,
- SCIF089, SCIF1234, SCIF567,
- ADC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
-
- /* interrupt groups */
- TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(GPIO, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
- INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
- INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
- INTC_VECT(TMU8, 0x540),
- INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
- INTC_VECT(SPDIF, 0x5e0),
- INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
- INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
- INTC_VECT(DMAC0_DMINT2, 0x680),
- INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
- INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
- INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
- INTC_VECT(SRC_SPDIF, 0x760),
- INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
- INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
- INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
- INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
- INTC_VECT(GFX2D, 0x8c0),
- INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
- INTC_VECT(EXBUS_ATA, 0x940),
- INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
- INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
- INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
- INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
- INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
- INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
- INTC_VECT(ADC, 0xb20),
- INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
- INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
- INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
- INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
- INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
- INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
- INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
- INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
- INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
- INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
- INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
- INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
- INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
- INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
- INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
- INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- TMU5_TICPI, TMU6, TMU7, TMU8),
- INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
- INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
- INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
- INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
- INTC_GROUP(SPI, SPI0, SPI1),
- INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
- INTC_GROUP(BBDMAC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
- { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
- GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
- DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
- { 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
- { 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
- { 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
- { 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
- { 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
- { 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
- { 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
- { 0xffe00020, 0, 32, 8, /* INT2PRI8 */
- { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
- { 0xffe00024, 0, 32, 8, /* INT2PRI9 */
- { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
- { 0xffe00028, 0, 32, 8, /* INT2PRI10 */
- { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
- { 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
- { TMU1, TMU2, TMU2_TICPI, TMU3 } },
- { 0xffe00030, 0, 32, 8, /* INT2PRI12 */
- { TMU4, TMU5, TMU5_TICPI, TMU6 } },
- { 0xffe00034, 0, 32, 8, /* INT2PRI13 */
- { TMU7, TMU8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
deleted file mode 100644
index c818b788ecb05a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ /dev/null
@@ -1,505 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7780 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/dma-register.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7780_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7780_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7780_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7780_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7780_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x640-0x6a0, 0x780-0x7a0
- */
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7780_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc818020,
- .end = 0xfc81808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x7c0-0x7e0, 0xd80-0xde0
- */
- .name = "error_irq",
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7780_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7780_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7780_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7780_devices_setup(void)
-{
- return platform_add_devices(sh7780_devices,
- ARRAY_SIZE(sh7780_devices));
-}
-arch_initcall(sh7780_devices_setup);
-
-static struct platform_device *sh7780_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- if (mach_is_sh2007()) {
- scif0_platform_data.scscr &= ~SCSCR_CKE1;
- scif1_platform_data.scscr &= ~SCSCR_CKE1;
- }
-
- sh_early_platform_add_devices(sh7780_early_devices,
- ARRAY_SIZE(sh7780_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
- INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
- INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
- INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
- INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
- INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI, 0xe80),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
- SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, DMAC1, DMAC0,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
deleted file mode 100644
index 3b4a414d60a91c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ /dev/null
@@ -1,608 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/dma-register.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x980)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7785_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7785_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7785_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7785_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7785_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6e0, and channel
- * vectors are 0x620-0x6c0
- */
- .name = "error_irq",
- .start = evt2irq(0x620),
- .end = evt2irq(0x620),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7785_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfcc08020,
- .end = 0xfcc0808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x940, and channel
- * vectors are 0x880-0x920
- */
- .name = "error_irq",
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7785_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7785_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7785_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7785_devices_setup(void)
-{
- return platform_add_devices(sh7785_devices,
- ARRAY_SIZE(sh7785_devices));
-}
-arch_initcall(sh7785_devices_setup);
-
-static struct platform_device *sh7785_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7785_early_devices,
- ARRAY_SIZE(sh7785_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
- SCIF2, SCIF3, SCIF4, SCIF5,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SIOF, MMCIF, DU, GDTA,
- TMU3, TMU4, TMU5,
- SSI0, SSI1,
- HAC0, HAC1,
- FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
- INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
- INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(DMAC0, 0x6e0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
- INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
- INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
- INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
- INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
- INTC_VECT(DMAC1, 0x940),
- INTC_VECT(HSPI, 0x960),
- INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
- INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SIOF, 0xc00),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DU, 0xd80),
- INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
- INTC_VECT(GDTA, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
- FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
- SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1,
- SCIF2, SCIF3 } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1,
- PCISERR, PCIINTA } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
- { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
- { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
- INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
- INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
- INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
- INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
- INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
- INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
- INTC_VECT(IRL4_HHHL, 0xcc0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0xe55f0000, 0xe5610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
deleted file mode 100644
index 74620f30b19bad..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ /dev/null
@@ -1,841 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Setup
- *
- * Copyright (C) 2009 - 2011 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Paul Mundt <paul.mundt@renesas.com>
- *
- * Based on SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-/*
- * The rest of these all have multiplexed IRQs
- */
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct resource scif1_demux_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- /* Placeholders, see sh7786_devices_setup() */
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x840)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x860)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffda0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct sh_timer_config tmu3_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu3_resources[] = {
- DEFINE_RES_MEM(0xffde0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device tmu3_device = {
- .name = "sh-tmu",
- .id = 3,
- .dev = {
- .platform_data = &tmu3_platform_data,
- },
- .resource = tmu3_resources,
- .num_resources = ARRAY_SIZE(tmu3_resources),
-};
-
-static const struct sh_dmae_channel dmac0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = dmac0_channels,
- .channel_num = ARRAY_SIZE(dmac0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource dmac0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- }, {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "error_irq",
- .start = evt2irq(0x5c0),
- .end = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- }, {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x500),
- .end = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = dmac0_resources,
- .num_resources = ARRAY_SIZE(dmac0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-#define USB_EHCI_START 0xffe70000
-#define USB_OHCI_START 0xffe70400
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = USB_EHCI_START,
- .end = USB_EHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = USB_OHCI_START,
- .end = USB_OHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7786_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &tmu3_device,
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &dma0_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-/*
- * Please call this function if your platform board
- * use external clock for USB
- * */
-#define USBCTL0 0xffe70858
-#define CLOCK_MODE_MASK 0xffffff7f
-#define EXT_CLOCK_MODE 0x00000080
-
-void __init sh7786_usb_use_exclock(void)
-{
- u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
- __raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
-}
-
-#define USBINITREG1 0xffe70094
-#define USBINITREG2 0xffe7009c
-#define USBINITVAL1 0x00ff0040
-#define USBINITVAL2 0x00000001
-
-#define USBPCTL1 0xffe70804
-#define USBST 0xffe70808
-#define PHY_ENB 0x00000001
-#define PLL_ENB 0x00000002
-#define PHY_RST 0x00000004
-#define ACT_PLL_STATUS 0xc0000000
-
-static void __init sh7786_usb_setup(void)
-{
- int i = 1000000;
-
- /*
- * USB initial settings
- *
- * The following settings are necessary
- * for using the USB modules.
- *
- * see "USB Initial Settings" for detail
- */
- __raw_writel(USBINITVAL1, USBINITREG1);
- __raw_writel(USBINITVAL2, USBINITREG2);
-
- /*
- * Set the PHY and PLL enable bit
- */
- __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i--) {
- if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
- break;
- }
- cpu_relax();
- }
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT,
- TMU0_0, TMU0_1, TMU0_2, TMU0_3,
- TMU1_0, TMU1_1, TMU1_2,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3,
- SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB,
- I2C0, I2C1,
- DU,
- SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL,
- HSPI,
- GPIO0, GPIO1,
- Thermal,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* Muxed sub-events */
- TXI1, BRI1, RXI1, ERI1,
-};
-
-static struct intc_vect sh7786_vectors[] __initdata = {
- INTC_VECT(WDT, 0x3e0),
- INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
- INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
- INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
- INTC_VECT(TMU1_2, 0x4c0),
- INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
- INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
- INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
- INTC_VECT(DMAC0_6, 0x5c0),
- INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
- INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
- INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
- INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
- INTC_VECT(HPB_2, 0x6e0),
- INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
- INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
- INTC_VECT(SCIF1, 0x780),
- INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
- INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
- INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
- INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
- INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
- INTC_VECT(PCIeC0_2, 0xb20),
- INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
- INTC_VECT(PCIeC1_2, 0xb80),
- INTC_VECT(USB, 0xba0),
- INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
- INTC_VECT(DU, 0xd00),
- INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
- INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
- INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
- INTC_VECT(PCIeC2_2, 0xde0),
- INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
- INTC_VECT(FLCTL, 0xe40),
- INTC_VECT(HSPI, 0xe80),
- INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
- INTC_VECT(Thermal, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-#define CnINTMSK0 0xfe410030
-#define CnINTMSK1 0xfe410040
-#define CnINTMSKCLR0 0xfe410050
-#define CnINTMSKCLR1 0xfe410060
-#define CnINT2MSKR0 0xfe410a20
-#define CnINT2MSKR1 0xfe410a24
-#define CnINT2MSKR2 0xfe410a28
-#define CnINT2MSKR3 0xfe410a2c
-#define CnINT2MSKCR0 0xfe410a30
-#define CnINT2MSKCR1 0xfe410a34
-#define CnINT2MSKCR2 0xfe410a38
-#define CnINT2MSKCR3 0xfe410a3c
-#define INTMSK2 0xfe410068
-#define INTMSKCLR2 0xfe41006c
-
-#define INTDISTCR0 0xfe4100b0
-#define INTDISTCR1 0xfe4100b4
-#define INT2DISTCR0 0xfe410900
-#define INT2DISTCR1 0xfe410904
-#define INT2DISTCR2 0xfe410908
-#define INT2DISTCR3 0xfe41090c
-
-static struct intc_mask_reg sh7786_mask_registers[] __initdata = {
- { CnINTMSK0, CnINTMSKCLR0, 32,
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 },
- INTC_SMP_BALANCING(INTDISTCR0) },
- { INTMSK2, INTMSKCLR2, 32,
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
- { CnINT2MSKR0, CnINT2MSKCR0 , 32,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { CnINT2MSKR1, CnINT2MSKCR1, 32,
- { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3, 0, }, INTC_SMP_BALANCING(INT2DISTCR1) },
- { CnINT2MSKR2, CnINT2MSKCR2, 32,
- { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR2) },
- { CnINT2MSKR3, CnINT2MSKCR3, 32,
- { 0, 0, 0, 0, 0, 0,
- I2C0, I2C1,
- DU, SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL, 0,
- HSPI, GPIO0, GPIO1, Thermal,
- 0, 0, 0, 0, 0, 0, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR3) },
-};
-
-static struct intc_prio_reg sh7786_prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
- { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
- TMU0_2, TMU0_3 } },
- { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
- TMU1_2, 0 } },
- { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
- DMAC0_2, DMAC0_3 } },
- { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
- DMAC0_6, HUDI1 } },
- { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
- DMAC1_1, DMAC1_2 } },
- { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
- HPB_1, HPB_2 } },
- { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
- SCIF0_2, SCIF0_3 } },
- { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
- { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
- { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
- Eth_0, Eth_1 } },
- { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
- { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
- { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
- { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
- { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1 } },
- { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
- { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
- { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
- { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
- { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
- PCIeC2_1, PCIeC2_2 } },
- { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
- { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
- GPIO1, Thermal } },
- { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
- { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
-};
-
-static struct intc_subgroup sh7786_subgroups[] __initdata = {
- { 0xfe410c20, 32, SCIF1,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TXI1, BRI1, RXI1, ERI1 } },
-};
-
-static struct intc_desc sh7786_intc_desc __initdata = {
- .name = "sh7786",
- .hw = {
- .vectors = sh7786_vectors,
- .nr_vectors = ARRAY_SIZE(sh7786_vectors),
- .mask_regs = sh7786_mask_registers,
- .nr_mask_regs = ARRAY_SIZE(sh7786_mask_registers),
- .subgroups = sh7786_subgroups,
- .nr_subgroups = ARRAY_SIZE(sh7786_subgroups),
- .prio_regs = sh7786_prio_registers,
- .nr_prio_regs = ARRAY_SIZE(sh7786_prio_registers),
- },
-};
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sh7786_sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg sh7786_ack_registers[] __initdata = {
- { 0xfe410024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
- vectors_irq0123, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
- vectors_irq4567, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
- INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
- INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
- INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
- INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
- INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
- INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
- INTC_VECT(IRL4_HHHL, 0xac0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xfe410000
-#define INTC_INTMSK0 CnINTMSK0
-#define INTC_INTMSK1 CnINTMSK1
-#define INTC_INTMSK2 INTMSK2
-#define INTC_INTMSKCLR1 CnINTMSKCLR1
-#define INTC_INTMSKCLR2 INTMSKCLR2
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- register_intc_controller(&sh7786_intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
-
-static int __init sh7786_devices_setup(void)
-{
- int ret, irq;
-
- sh7786_usb_setup();
-
- /*
- * De-mux SCIF1 IRQs if possible
- */
- irq = intc_irq_lookup(sh7786_intc_desc.name, TXI1);
- if (irq > 0) {
- scif1_demux_resources[1].start =
- intc_irq_lookup(sh7786_intc_desc.name, ERI1);
- scif1_demux_resources[2].start =
- intc_irq_lookup(sh7786_intc_desc.name, RXI1);
- scif1_demux_resources[3].start = irq;
- scif1_demux_resources[4].start =
- intc_irq_lookup(sh7786_intc_desc.name, BRI1);
-
- scif1_device.resource = scif1_demux_resources;
- scif1_device.num_resources = ARRAY_SIZE(scif1_demux_resources);
- }
-
- ret = platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return platform_add_devices(sh7786_devices,
- ARRAY_SIZE(sh7786_devices));
-}
-arch_initcall(sh7786_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
deleted file mode 100644
index 7014d6d199b3e6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ /dev/null
@@ -1,396 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 Prototype Setup
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/shx3.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-/*
- * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
- * INTEVT values overlap with the FPU EXPEVT ones, requiring special
- * demuxing in the exception dispatch path.
- *
- * As this overlap is something that never should have made it in to
- * silicon in the first place, we just refuse to deal with the port at
- * all rather than adding infrastructure to hack around it.
- */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffc30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffc40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7e0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffc60000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffc10000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffc20000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *shx3_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-static int __init shx3_devices_setup(void)
-{
- return platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-arch_initcall(shx3_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3,
- HUDII,
- TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
- PCII0, PCII1, PCII2, PCII3, PCII4,
- PCII5, PCII6, PCII7, PCII8, PCII9,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
- DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
- DU,
- DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
- DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
- IIC, VIN0, VIN1, VCORE0, ATAPI,
- DTU0, DTU1, DTU2, DTU3,
- FE0, FE1,
- GPIO0, GPIO1, GPIO2, GPIO3,
- PAM, IRM,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* interrupt groups */
- IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
- DMAC0, DMAC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDII, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460),
- INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0),
- INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520),
- INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560),
- INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0),
- INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0),
- INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
- INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
- INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
- INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
- INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
- INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960),
- INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0),
- INTC_VECT(DMAC0_DMAE, 0x9c0),
- INTC_VECT(DU, 0x9e0),
- INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20),
- INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60),
- INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0),
- INTC_VECT(DMAC1_DMAE, 0xac0),
- INTC_VECT(IIC, 0xae0),
- INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
- INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
- INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
- INTC_VECT(DTU0, 0xc40),
- INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
- INTC_VECT(DTU1, 0xca0),
- INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
- INTC_VECT(DTU2, 0xd00),
- INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
- INTC_VECT(DTU3, 0xd60),
- INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
- INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
- INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
- INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL),
- INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
- INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
- DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-};
-
-#define INT2DISTCR0 0xfe4108a0
-#define INT2DISTCR1 0xfe4108a4
-#define INT2DISTCR2 0xfe4108a8
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */
- { IRL } },
- { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */
- { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC,
- DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */
- 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */
- { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */
- PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2,
- PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11,
- DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7,
- DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4,
- DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 },
- INTC_SMP_BALANCING(INT2DISTCR1) },
- { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI,
- SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI,
- SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI,
- SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI },
- INTC_SMP_BALANCING(INT2DISTCR2) },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-
- { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4,
- TMU3, TMU2, TMU1, TMU0 } },
- { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0,
- SCIF3, SCIF2,
- SCIF1, SCIF0 } },
- { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0,
- PCII56789, PCII4,
- PCII3, PCII2,
- PCII1, PCII0 } },
- { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0,
- VIN1, VIN0, IIC, DU} },
- { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3,
- GPIO2, GPIO1, GPIO0, IRM } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
- mask_registers, prio_registers, sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
- mask_registers, prio_registers, NULL);
-
-void __init plat_irq_setup_pins(int mode)
-{
- int ret = 0;
-
- switch (mode) {
- case IRQ_MODE_IRQ:
- ret |= gpio_request(GPIO_FN_IRQ3, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ2, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ1, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ0, intc_desc_irq.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRQ mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irq);
- break;
- case IRQ_MODE_IRL3210:
- ret |= gpio_request(GPIO_FN_IRL3, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL2, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL1, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL0, intc_desc_irl.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRL mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irl);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- unsigned int nid = 1;
-
- /* Register CPU#0 URAM space as Node 1 */
- setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */
-
-#if 0
- /* XXX: Not yet.. */
- setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */
- setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */
- setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */
-#endif
-
- setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
deleted file mode 100644
index 1261dc7b84e8be..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 SMP
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/cpu.h>
-#include <asm/sections.h>
-
-#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
-#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
-
-#define STBCR_MSTP 0x00000001
-#define STBCR_RESET 0x00000002
-#define STBCR_SLEEP 0x00000004
-#define STBCR_LTSLP 0x80000000
-
-static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned int message = (unsigned int)(long)arg;
- unsigned int cpu = hard_smp_processor_id();
- unsigned int offs = 4 * cpu;
- unsigned int x;
-
- x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
- x &= (1 << (message << 2));
- __raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
-
- smp_message_recv(message);
-
- return IRQ_HANDLED;
-}
-
-static void shx3_smp_setup(void)
-{
- unsigned int cpu = 0;
- int i, num;
-
- init_cpu_possible(cpumask_of(cpu));
-
- /* Enable light sleep for the boot CPU */
- __raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
-
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
-
- /*
- * Do this stupidly for now.. we don't have an easy way to probe
- * for the total number of cores.
- */
- for (i = 1, num = 0; i < NR_CPUS; i++) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
-
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
-}
-
-static void shx3_prepare_cpus(unsigned int max_cpus)
-{
- int i;
-
- BUILD_BUG_ON(SMP_MSG_NR >= 8);
-
- for (i = 0; i < SMP_MSG_NR; i++)
- if (request_irq(104 + i, ipi_interrupt_handler,
- IRQF_PERCPU, "IPI", (void *)(long)i))
- pr_err("Failed to request irq %d\n", i);
-
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-}
-
-static void shx3_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- if (__in_29bit_mode())
- __raw_writel(entry_point, RESET_REG(cpu));
- else
- __raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
-
- if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
-
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
-
- /* Start up secondary processor by sending a reset */
- __raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
-}
-
-static unsigned int shx3_smp_processor_id(void)
-{
- return __raw_readl(0xff000048); /* CPIDR */
-}
-
-static void shx3_send_ipi(unsigned int cpu, unsigned int message)
-{
- unsigned long addr = 0xfe410070 + (cpu * 4);
-
- BUG_ON(cpu >= 4);
-
- __raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
-}
-
-static void shx3_update_boot_vector(unsigned int cpu)
-{
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
- __raw_writel(STBCR_RESET, STBCR_REG(cpu));
-}
-
-static int shx3_cpu_prepare(unsigned int cpu)
-{
- shx3_update_boot_vector(cpu);
- return 0;
-}
-
-static int register_shx3_cpu_notifier(void)
-{
- cpuhp_setup_state_nocalls(CPUHP_SH_SH3X_PREPARE, "sh/shx3:prepare",
- shx3_cpu_prepare, NULL);
- return 0;
-}
-late_initcall(register_shx3_cpu_notifier);
-
-struct plat_smp_ops shx3_smp_ops = {
- .smp_setup = shx3_smp_setup,
- .prepare_cpus = shx3_prepare_cpus,
- .start_cpu = shx3_start_cpu,
- .smp_processor_id = shx3_smp_processor_id,
- .send_ipi = shx3_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/ubc.c b/arch/sh/kernel/cpu/sh4a/ubc.c
deleted file mode 100644
index 25eacd9c47d1b8..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/ubc.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/ubc.c
- *
- * On-chip UBC support for SH-4A CPUs.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <asm/hw_breakpoint.h>
-
-#define UBC_CBR(idx) (0xff200000 + (0x20 * idx))
-#define UBC_CRR(idx) (0xff200004 + (0x20 * idx))
-#define UBC_CAR(idx) (0xff200008 + (0x20 * idx))
-#define UBC_CAMR(idx) (0xff20000c + (0x20 * idx))
-
-#define UBC_CCMFR 0xff200600
-#define UBC_CBCR 0xff200620
-
-/* CRR */
-#define UBC_CRR_PCB (1 << 1)
-#define UBC_CRR_BIE (1 << 0)
-
-/* CBR */
-#define UBC_CBR_CE (1 << 0)
-
-static struct sh_ubc sh4a_ubc;
-
-static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
- __raw_writel(info->address, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(0, UBC_CBR(idx));
- __raw_writel(0, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_enable_all(unsigned long mask)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (mask & (1 << i))
- __raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static void sh4a_ubc_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- __raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static unsigned long sh4a_ubc_active_mask(void)
-{
- unsigned long active = 0;
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
- active |= (1 << i);
-
- return active;
-}
-
-static unsigned long sh4a_ubc_triggered_mask(void)
-{
- return __raw_readl(UBC_CCMFR);
-}
-
-static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
-{
- __raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
-}
-
-static struct sh_ubc sh4a_ubc = {
- .name = "SH-4A",
- .num_events = 2,
- .trap_nr = 0x1e0,
- .enable = sh4a_ubc_enable,
- .disable = sh4a_ubc_disable,
- .enable_all = sh4a_ubc_enable_all,
- .disable_all = sh4a_ubc_disable_all,
- .active_mask = sh4a_ubc_active_mask,
- .triggered_mask = sh4a_ubc_triggered_mask,
- .clear_triggered_mask = sh4a_ubc_clear_triggered_mask,
-};
-
-static int __init sh4a_ubc_init(void)
-{
- struct clk *ubc_iclk = clk_get(NULL, "ubc0");
- int i;
-
- /*
- * The UBC MSTP bit is optional, as not all platforms will have
- * it. Just ignore it if we can't find it.
- */
- if (IS_ERR(ubc_iclk))
- ubc_iclk = NULL;
-
- clk_enable(ubc_iclk);
-
- __raw_writel(0, UBC_CBCR);
-
- for (i = 0; i < sh4a_ubc.num_events; i++) {
- __raw_writel(0, UBC_CAMR(i));
- __raw_writel(0, UBC_CBR(i));
-
- __raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
-
- /* dummy read for write posting */
- (void)__raw_readl(UBC_CRR(i));
- }
-
- clk_disable(ubc_iclk);
-
- sh4a_ubc.clk = ubc_iclk;
-
- return register_sh_ubc(&sh4a_ubc);
-}
-arch_initcall(sh4a_ubc_init);
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
deleted file mode 100644
index 7581d5f03ce155..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-Mobile backends.
-#
-
-# Power Management & Sleep mode
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
deleted file mode 100644
index b0f9c8f8fd146a..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/cpuidle.c
- *
- * Cpuidle support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <linux/cpuidle.h>
-#include <linux/export.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-
-static unsigned long cpuidle_mode[] = {
- SUSP_SH_SLEEP, /* regular sleep mode */
- SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
- SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
-};
-
-static int cpuidle_sleep_enter(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- unsigned long allowed_mode = SUSP_SH_SLEEP;
- int requested_state = index;
- int allowed_state;
- int k;
-
- /* convert allowed mode to allowed state */
- for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
- if (cpuidle_mode[k] == allowed_mode)
- break;
-
- allowed_state = k;
-
- /* take the following into account for sleep mode selection:
- * - allowed_state: best mode allowed by hardware (clock deps)
- * - requested_state: best mode allowed by software (latencies)
- */
- k = min_t(int, allowed_state, requested_state);
-
- sh_mobile_call_standby(cpuidle_mode[k]);
-
- return k;
-}
-
-static struct cpuidle_driver cpuidle_driver = {
- .name = "sh_idle",
- .owner = THIS_MODULE,
- .states = {
- {
- .exit_latency = 1,
- .target_residency = 1 * 2,
- .power_usage = 3,
- .enter = cpuidle_sleep_enter,
- .name = "C1",
- .desc = "SuperH Sleep Mode",
- },
- {
- .exit_latency = 100,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C2",
- .desc = "SuperH Sleep Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- {
- .exit_latency = 2300,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C3",
- .desc = "SuperH Mobile Standby Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- },
- .safe_state_index = 0,
- .state_count = 3,
-};
-
-int __init sh_mobile_setup_cpuidle(void)
-{
- if (sh_mobile_sleep_supported & SUSP_SH_SF)
- cpuidle_driver.states[1].flags = CPUIDLE_FLAG_NONE;
-
- if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
- cpuidle_driver.states[2].flags = CPUIDLE_FLAG_NONE;
-
- return cpuidle_register(&cpuidle_driver, NULL);
-}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
deleted file mode 100644
index ca9945f51e51d4..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/pm.c
- *
- * Power management support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/bl_bit.h>
-
-/*
- * Notifier lists for pre/post sleep notification
- */
-ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
-ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
-
-/*
- * Sleep modes available on SuperH Mobile:
- *
- * Sleep mode is just plain "sleep" instruction
- * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
- * Standby Self-Refresh mode is above plus stopped clocks
- */
-#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
-#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
-#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
-#define SUSP_MODE_RSTANDBY_SF \
- (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
- /*
- * U-standby mode is unsupported since it needs bootloader hacks
- */
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-#define RAM_BASE 0xfd800000 /* RSMEM */
-#else
-#define RAM_BASE 0xe5200000 /* ILRAM */
-#endif
-
-void sh_mobile_call_standby(unsigned long mode)
-{
- void *onchip_mem = (void *)RAM_BASE;
- struct sh_sleep_data *sdp = onchip_mem;
- void (*standby_onchip_mem)(unsigned long, unsigned long);
-
- /* code located directly after data structure */
- standby_onchip_mem = (void *)(sdp + 1);
-
- atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
- mode, NULL);
-
- /* flush the caches if MMU flag is set */
- if (mode & SUSP_SH_MMU)
- flush_cache_all();
-
- /* Let assembly snippet in on-chip memory handle the rest */
- standby_onchip_mem(mode, RAM_BASE);
-
- atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
- mode, NULL);
-}
-
-extern char sh_mobile_sleep_enter_start;
-extern char sh_mobile_sleep_enter_end;
-
-extern char sh_mobile_sleep_resume_start;
-extern char sh_mobile_sleep_resume_end;
-
-unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
-
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end)
-{
- void *onchip_mem = (void *)RAM_BASE;
- void *vp;
- struct sh_sleep_data *sdp;
- int n;
-
- /* part 0: data area */
- sdp = onchip_mem;
- sdp->addr.stbcr = 0xa4150020; /* STBCR */
- sdp->addr.bar = 0xa4150040; /* BAR */
- sdp->addr.pteh = 0xff000000; /* PTEH */
- sdp->addr.ptel = 0xff000004; /* PTEL */
- sdp->addr.ttb = 0xff000008; /* TTB */
- sdp->addr.tea = 0xff00000c; /* TEA */
- sdp->addr.mmucr = 0xff000010; /* MMUCR */
- sdp->addr.ptea = 0xff000034; /* PTEA */
- sdp->addr.pascr = 0xff000070; /* PASCR */
- sdp->addr.irmcr = 0xff000078; /* IRMCR */
- sdp->addr.ccr = 0xff00001c; /* CCR */
- sdp->addr.ramcr = 0xff000074; /* RAMCR */
- vp = sdp + 1;
-
- /* part 1: common code to enter sleep mode */
- n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
- memcpy(vp, &sh_mobile_sleep_enter_start, n);
- vp += roundup(n, 4);
-
- /* part 2: board specific code to enter self-refresh mode */
- n = pre_end - pre_start;
- memcpy(vp, pre_start, n);
- sdp->sf_pre = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 3: board specific code to resume from self-refresh mode */
- n = post_end - post_start;
- memcpy(vp, post_start, n);
- sdp->sf_post = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 4: common code to resume from sleep mode */
- WARN_ON(vp > (onchip_mem + 0x600));
- vp = onchip_mem + 0x600; /* located at interrupt vector */
- n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
- memcpy(vp, &sh_mobile_sleep_resume_start, n);
- sdp->resume = (unsigned long)vp;
-
- sh_mobile_sleep_supported |= flags;
-}
-
-static int sh_pm_enter(suspend_state_t state)
-{
- if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
- return -ENXIO;
-
- local_irq_disable();
- set_bl_bit();
- sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
- local_irq_disable();
- clear_bl_bit();
- return 0;
-}
-
-static const struct platform_suspend_ops sh_pm_ops = {
- .enter = sh_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init sh_pm_init(void)
-{
- suspend_set_ops(&sh_pm_ops);
- return sh_mobile_setup_cpuidle();
-}
-
-late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
deleted file mode 100644
index f928c03151296c..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
- *
- * Sleep mode and Standby modes support for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-
-/*
- * Kernel mode register usage, see entry.S:
- * k0 scratch
- * k1 scratch
- */
-#define k0 r0
-#define k1 r1
-
-/* manage self-refresh and enter standby mode. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(sh_mobile_sleep_enter_start)
-
- /* save mode flags */
- mov.l r4, @(SH_SLEEP_MODE, r5)
-
- /* save original vbr */
- stc vbr, r0
- mov.l r0, @(SH_SLEEP_VBR, r5)
-
- /* point vbr to our on-chip memory page */
- ldc r5, vbr
-
- /* save return address */
- sts pr, r0
- mov.l r0, @(SH_SLEEP_SPC, r5)
-
- /* save sr */
- stc sr, r0
- mov.l r0, @(SH_SLEEP_SR, r5)
-
- /* save general purpose registers to stack if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_regs_save
-
- sts.l pr, @-r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* make sure bank0 is selected, save low registers */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
- bsr save_low_regs
- nop
-
- /* switch to bank 1, save low registers */
- mov.l rb_bit, r10
- bsr set_sr
- mov #-1, r9
-
- bsr save_low_regs
- nop
-
- /* switch back to bank 0 */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
-skip_regs_save:
-
- /* save sp, also set to internal ram */
- mov.l r15, @(SH_SLEEP_SP, r5)
- mov r5, r15
-
- /* save stbcr */
- bsr save_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* save mmu and cache context if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_mmu_save_disable
-
- /* save mmu state */
- bsr save_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_MMUCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- /* invalidate TLBs and disable the MMU */
- bsr get_register
- mov #SH_SLEEP_REG_MMUCR, r0
- mov #4, r1
- mov.l r1, @r0
- icbi @r0
-
- /* save cache registers and disable caches */
- bsr save_register
- mov #SH_SLEEP_REG_CCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_RAMCR, r0
-
- bsr get_register
- mov #SH_SLEEP_REG_CCR, r0
- mov #0, r1
- mov.l r1, @r0
- icbi @r0
-
-skip_mmu_save_disable:
- /* call self-refresh entering code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_set_sf
-
- mov.l @(SH_SLEEP_SF_PRE, r5), r0
- jsr @r0
- nop
-
-skip_set_sf:
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_STANDBY, r0
- bt test_rstandby
-
- /* set mode to "software standby mode" */
- bra do_sleep
- mov #0x80, r1
-
-test_rstandby:
- tst #SUSP_SH_RSTANDBY, r0
- bt test_ustandby
-
- /* setup BAR register */
- bsr get_register
- mov #SH_SLEEP_REG_BAR, r0
- mov.l @(SH_SLEEP_RESUME, r5), r1
- mov.l r1, @r0
-
- /* set mode to "r-standby mode" */
- bra do_sleep
- mov #0x20, r1
-
-test_ustandby:
- tst #SUSP_SH_USTANDBY, r0
- bt force_sleep
-
- /* set mode to "u-standby mode" */
- bra do_sleep
- mov #0x10, r1
-
-force_sleep:
-
- /* set mode to "sleep mode" */
- mov #0x00, r1
-
-do_sleep:
- /* setup and enter selected standby mode */
- bsr get_register
- mov #SH_SLEEP_REG_STBCR, r0
- mov.l r1, @r0
-again:
- sleep
- bra again
- nop
-
-save_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_ADDR, r0
- mov.l @r1, r1
- add #SH_SLEEP_BASE_DATA, r0
- mov.l r1, @(r0, r5)
- add #-SH_SLEEP_BASE_DATA, r0
- rts
- nop
-
-get_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- rts
- nop
-
-set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-save_low_regs:
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
- .balign 4
-rb_bit: .long 0x20000000 ! RB=1
-
-ENTRY(sh_mobile_sleep_enter_end)
-
- .balign 4
-ENTRY(sh_mobile_sleep_resume_start)
-
- /* figure out start address */
- bsr 0f
- nop
-0:
- sts pr, k1
- mov.l 1f, k0
- and k0, k1
-
- /* store pointer to data area in VBR */
- ldc k1, vbr
-
- /* setup sr with saved sr */
- mov.l @(SH_SLEEP_SR, k1), k0
- ldc k0, sr
-
- /* now: user register set! */
- stc vbr, r5
-
- /* setup spc with return address to c code */
- mov.l @(SH_SLEEP_SPC, r5), r0
- ldc r0, spc
-
- /* restore vbr */
- mov.l @(SH_SLEEP_VBR, r5), r0
- ldc r0, vbr
-
- /* setup ssr with saved sr */
- mov.l @(SH_SLEEP_SR, r5), r0
- ldc r0, ssr
-
- /* restore sp */
- mov.l @(SH_SLEEP_SP, r5), r15
-
- /* restore sleep mode register */
- bsr restore_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* call self-refresh resume code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_restore_sf
-
- mov.l @(SH_SLEEP_SF_POST, r5), r0
- jsr @r0
- nop
-
-skip_restore_sf:
- /* restore mmu and cache state if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_restore_mmu
-
- /* restore mmu state */
- bsr restore_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_MMUCR, r0
- icbi @r0
-
- /* restore cache settings */
- bsr restore_register
- mov #SH_SLEEP_REG_RAMCR, r0
- icbi @r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_CCR, r0
- icbi @r0
-
-skip_restore_mmu:
-
- /* restore general purpose registers if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_restore_regs
-
- /* switch to bank 1, restore low registers */
- mov.l _rb_bit, r10
- bsr _set_sr
- mov #-1, r9
-
- bsr restore_low_regs
- nop
-
- /* switch to bank0, restore low registers */
- mov.l _rb_bit, r9
- not r9, r9
- bsr _set_sr
- mov #0, r10
-
- bsr restore_low_regs
- nop
-
- /* restore the rest of the registers */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- lds.l @r15+, pr
-
-skip_restore_regs:
- rte
- nop
-
-restore_register:
- add #SH_SLEEP_BASE_DATA, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_DATA, r0
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- mov.l r1, @r0
- rts
- nop
-
-_set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-restore_low_regs:
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- rts
- mov.l @r15+, r7
-
- .balign 4
-_rb_bit: .long 0x20000000 ! RB=1
-1: .long ~0x7ff
-ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
deleted file mode 100644
index 19ce6a950aaca8..00000000000000
--- a/arch/sh/kernel/crash_dump.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * crash_dump.c - Memory preserving reboot related code.
- *
- * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- * Copyright (C) IBM Corporation, 2004. All rights reserved
- */
-#include <linux/errno.h>
-#include <linux/crash_dump.h>
-#include <linux/io.h>
-#include <linux/uio.h>
-#include <linux/uaccess.h>
-
-ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
- size_t csize, unsigned long offset)
-{
- void __iomem *vaddr;
-
- if (!csize)
- return 0;
-
- vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
- csize = copy_to_iter(vaddr + offset, csize, iter);
- iounmap(vaddr);
-
- return csize;
-}
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
deleted file mode 100644
index ad07527e2a990a..00000000000000
--- a/arch/sh/kernel/debugtraps.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/debugtraps.S
- *
- * Debug trap jump tables for SuperH
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_KGDB)
-#define singlestep_trap_handler debug_trap_handler
-#endif
-
-#if !defined(CONFIG_SH_STANDARD_BIOS)
-#define sh_bios_handler debug_trap_handler
-#endif
-
- .data
-
-ENTRY(debug_trap_table)
- .long debug_trap_handler /* 0x30 */
- .long debug_trap_handler /* 0x31 */
- .long debug_trap_handler /* 0x32 */
- .long debug_trap_handler /* 0x33 */
- .long debug_trap_handler /* 0x34 */
- .long debug_trap_handler /* 0x35 */
- .long debug_trap_handler /* 0x36 */
- .long debug_trap_handler /* 0x37 */
- .long debug_trap_handler /* 0x38 */
- .long debug_trap_handler /* 0x39 */
- .long debug_trap_handler /* 0x3a */
- .long debug_trap_handler /* 0x3b */
- .long breakpoint_trap_handler /* 0x3c */
- .long singlestep_trap_handler /* 0x3d */
- .long bug_trap_handler /* 0x3e */
- .long sh_bios_handler /* 0x3f */
diff --git a/arch/sh/kernel/disassemble.c b/arch/sh/kernel/disassemble.c
deleted file mode 100644
index 34e25a439c811c..00000000000000
--- a/arch/sh/kernel/disassemble.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Disassemble SuperH instructions.
- *
- * Copyright (C) 1999 kaz Kojima
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-/*
- * Format of an instruction in memory.
- */
-typedef enum {
- HEX_0, HEX_1, HEX_2, HEX_3, HEX_4, HEX_5, HEX_6, HEX_7,
- HEX_8, HEX_9, HEX_A, HEX_B, HEX_C, HEX_D, HEX_E, HEX_F,
- REG_N, REG_M, REG_NM, REG_B,
- BRANCH_12, BRANCH_8,
- DISP_8, DISP_4,
- IMM_4, IMM_4BY2, IMM_4BY4, PCRELIMM_8BY2, PCRELIMM_8BY4,
- IMM_8, IMM_8BY2, IMM_8BY4,
-} sh_nibble_type;
-
-typedef enum {
- A_END, A_BDISP12, A_BDISP8,
- A_DEC_M, A_DEC_N,
- A_DISP_GBR, A_DISP_PC, A_DISP_REG_M, A_DISP_REG_N,
- A_GBR,
- A_IMM,
- A_INC_M, A_INC_N,
- A_IND_M, A_IND_N, A_IND_R0_REG_M, A_IND_R0_REG_N,
- A_MACH, A_MACL,
- A_PR, A_R0, A_R0_GBR, A_REG_M, A_REG_N, A_REG_B,
- A_SR, A_VBR, A_SSR, A_SPC, A_SGR, A_DBR,
- F_REG_N, F_REG_M, D_REG_N, D_REG_M,
- X_REG_N, /* Only used for argument parsing */
- X_REG_M, /* Only used for argument parsing */
- DX_REG_N, DX_REG_M, V_REG_N, V_REG_M,
- FD_REG_N,
- XMTRX_M4,
- F_FR0,
- FPUL_N, FPUL_M, FPSCR_N, FPSCR_M,
-} sh_arg_type;
-
-static struct sh_opcode_info {
- char *name;
- sh_arg_type arg[7];
- sh_nibble_type nibbles[4];
-} sh_table[] = {
- {"add",{A_IMM,A_REG_N},{HEX_7,REG_N,IMM_8}},
- {"add",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_C}},
- {"addc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_E}},
- {"addv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_F}},
- {"and",{A_IMM,A_R0},{HEX_C,HEX_9,IMM_8}},
- {"and",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_9}},
- {"and.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_D,IMM_8}},
- {"bra",{A_BDISP12},{HEX_A,BRANCH_12}},
- {"bsr",{A_BDISP12},{HEX_B,BRANCH_12}},
- {"bt",{A_BDISP8},{HEX_8,HEX_9,BRANCH_8}},
- {"bf",{A_BDISP8},{HEX_8,HEX_B,BRANCH_8}},
- {"bt.s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bt/s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bf.s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"bf/s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"clrmac",{0},{HEX_0,HEX_0,HEX_2,HEX_8}},
- {"clrs",{0},{HEX_0,HEX_0,HEX_4,HEX_8}},
- {"clrt",{0},{HEX_0,HEX_0,HEX_0,HEX_8}},
- {"cmp/eq",{A_IMM,A_R0},{HEX_8,HEX_8,IMM_8}},
- {"cmp/eq",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_0}},
- {"cmp/ge",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_3}},
- {"cmp/gt",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_7}},
- {"cmp/hi",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_6}},
- {"cmp/hs",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_2}},
- {"cmp/pl",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_5}},
- {"cmp/pz",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_1}},
- {"cmp/str",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_C}},
- {"div0s",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_7}},
- {"div0u",{0},{HEX_0,HEX_0,HEX_1,HEX_9}},
- {"div1",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_4}},
- {"exts.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_E}},
- {"exts.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_F}},
- {"extu.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_C}},
- {"extu.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_D}},
- {"jmp",{A_IND_N},{HEX_4,REG_N,HEX_2,HEX_B}},
- {"jsr",{A_IND_N},{HEX_4,REG_N,HEX_0,HEX_B}},
- {"ldc",{A_REG_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_E}},
- {"ldc",{A_REG_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_E}},
- {"ldc",{A_REG_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_E}},
- {"ldc",{A_REG_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_E}},
- {"ldc",{A_REG_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_E}},
- {"ldc",{A_REG_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_E}},
- {"ldc",{A_REG_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_E}},
- {"ldc.l",{A_INC_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_7}},
- {"ldc.l",{A_INC_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_7}},
- {"ldc.l",{A_INC_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_7}},
- {"ldc.l",{A_INC_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_7}},
- {"ldc.l",{A_INC_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_7}},
- {"ldc.l",{A_INC_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_7}},
- {"ldc.l",{A_INC_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_7}},
- {"lds",{A_REG_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_A}},
- {"lds",{A_REG_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_A}},
- {"lds",{A_REG_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_A}},
- {"lds",{A_REG_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_A}},
- {"lds",{A_REG_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_A}},
- {"lds.l",{A_INC_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_6}},
- {"lds.l",{A_INC_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_6}},
- {"lds.l",{A_INC_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_6}},
- {"lds.l",{A_INC_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_6}},
- {"lds.l",{A_INC_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_6}},
- {"ldtlb",{0},{HEX_0,HEX_0,HEX_3,HEX_8}},
- {"mac.w",{A_INC_M,A_INC_N},{HEX_4,REG_N,REG_M,HEX_F}},
- {"mov",{A_IMM,A_REG_N},{HEX_E,REG_N,IMM_8}},
- {"mov",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_3}},
- {"mov.b",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_DISP_REG_M,A_R0},{HEX_8,HEX_4,REG_M,IMM_4}},
- {"mov.b",{A_DISP_GBR,A_R0},{HEX_C,HEX_4,IMM_8}},
- {"mov.b",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_C}},
- {"mov.b",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_4}},
- {"mov.b",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_R0,A_DISP_REG_M},{HEX_8,HEX_0,REG_M,IMM_4}},
- {"mov.b",{A_R0,A_DISP_GBR},{HEX_C,HEX_0,IMM_8}},
- {"mov.l",{ A_REG_M,A_DISP_REG_N},{HEX_1,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_DISP_REG_M,A_REG_N},{HEX_5,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{A_DISP_GBR,A_R0},{HEX_C,HEX_6,IMM_8BY4}},
- {"mov.l",{A_DISP_PC,A_REG_N},{HEX_D,REG_N,PCRELIMM_8BY4}},
- {"mov.l",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_E}},
- {"mov.l",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_6}},
- {"mov.l",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_R0,A_DISP_GBR},{HEX_C,HEX_2,IMM_8BY4}},
- {"mov.w",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_DISP_REG_M,A_R0},{HEX_8,HEX_5,REG_M,IMM_4BY2}},
- {"mov.w",{A_DISP_GBR,A_R0},{HEX_C,HEX_5,IMM_8BY2}},
- {"mov.w",{A_DISP_PC,A_REG_N},{HEX_9,REG_N,PCRELIMM_8BY2}},
- {"mov.w",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_D}},
- {"mov.w",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_5}},
- {"mov.w",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_R0,A_DISP_REG_M},{HEX_8,HEX_1,REG_M,IMM_4BY2}},
- {"mov.w",{A_R0,A_DISP_GBR},{HEX_C,HEX_1,IMM_8BY2}},
- {"mova",{A_DISP_PC,A_R0},{HEX_C,HEX_7,PCRELIMM_8BY4}},
- {"movca.l",{A_R0,A_IND_N},{HEX_0,REG_N,HEX_C,HEX_3}},
- {"movt",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_9}},
- {"muls",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_F}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"mulu",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_E}},
- {"neg",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_B}},
- {"negc",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_A}},
- {"nop",{0},{HEX_0,HEX_0,HEX_0,HEX_9}},
- {"not",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_7}},
- {"ocbi",{A_IND_N},{HEX_0,REG_N,HEX_9,HEX_3}},
- {"ocbp",{A_IND_N},{HEX_0,REG_N,HEX_A,HEX_3}},
- {"ocbwb",{A_IND_N},{HEX_0,REG_N,HEX_B,HEX_3}},
- {"or",{A_IMM,A_R0},{HEX_C,HEX_B,IMM_8}},
- {"or",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_B}},
- {"or.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_F,IMM_8}},
- {"pref",{A_IND_N},{HEX_0,REG_N,HEX_8,HEX_3}},
- {"rotcl",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_4}},
- {"rotcr",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_5}},
- {"rotl",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_4}},
- {"rotr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_5}},
- {"rte",{0},{HEX_0,HEX_0,HEX_2,HEX_B}},
- {"rts",{0},{HEX_0,HEX_0,HEX_0,HEX_B}},
- {"sets",{0},{HEX_0,HEX_0,HEX_5,HEX_8}},
- {"sett",{0},{HEX_0,HEX_0,HEX_1,HEX_8}},
- {"shad",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_C}},
- {"shld",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_D}},
- {"shal",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_0}},
- {"shar",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_1}},
- {"shll",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_0}},
- {"shll16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_8}},
- {"shll2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_8}},
- {"shll8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_8}},
- {"shlr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_1}},
- {"shlr16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_9}},
- {"shlr2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_9}},
- {"shlr8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_9}},
- {"sleep",{0},{HEX_0,HEX_0,HEX_1,HEX_B}},
- {"stc",{A_SR,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_2}},
- {"stc",{A_GBR,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_2}},
- {"stc",{A_VBR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_2}},
- {"stc",{A_SSR,A_REG_N},{HEX_0,REG_N,HEX_3,HEX_2}},
- {"stc",{A_SPC,A_REG_N},{HEX_0,REG_N,HEX_4,HEX_2}},
- {"stc",{A_SGR,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_2}},
- {"stc",{A_DBR,A_REG_N},{HEX_0,REG_N,HEX_7,HEX_2}},
- {"stc",{A_REG_B,A_REG_N},{HEX_0,REG_N,REG_B,HEX_2}},
- {"stc.l",{A_SR,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_3}},
- {"stc.l",{A_GBR,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_3}},
- {"stc.l",{A_VBR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_3}},
- {"stc.l",{A_SSR,A_DEC_N},{HEX_4,REG_N,HEX_3,HEX_3}},
- {"stc.l",{A_SPC,A_DEC_N},{HEX_4,REG_N,HEX_4,HEX_3}},
- {"stc.l",{A_SGR,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_3}},
- {"stc.l",{A_DBR,A_DEC_N},{HEX_4,REG_N,HEX_7,HEX_3}},
- {"stc.l",{A_REG_B,A_DEC_N},{HEX_4,REG_N,REG_B,HEX_3}},
- {"sts",{A_MACH,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_A}},
- {"sts",{A_MACL,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_A}},
- {"sts",{A_PR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_A}},
- {"sts",{FPUL_M,A_REG_N},{HEX_0,REG_N,HEX_5,HEX_A}},
- {"sts",{FPSCR_M,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_A}},
- {"sts.l",{A_MACH,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_2}},
- {"sts.l",{A_MACL,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_2}},
- {"sts.l",{A_PR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_2}},
- {"sts.l",{FPUL_M,A_DEC_N},{HEX_4,REG_N,HEX_5,HEX_2}},
- {"sts.l",{FPSCR_M,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_2}},
- {"sub",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_8}},
- {"subc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_A}},
- {"subv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_B}},
- {"swap.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_8}},
- {"swap.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_9}},
- {"tas.b",{A_IND_N},{HEX_4,REG_N,HEX_1,HEX_B}},
- {"trapa",{A_IMM},{HEX_C,HEX_3,IMM_8}},
- {"tst",{A_IMM,A_R0},{HEX_C,HEX_8,IMM_8}},
- {"tst",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_8}},
- {"tst.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_C,IMM_8}},
- {"xor",{A_IMM,A_R0},{HEX_C,HEX_A,IMM_8}},
- {"xor",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_A}},
- {"xor.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_E,IMM_8}},
- {"xtrct",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_D}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"dt",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_0}},
- {"dmuls.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_D}},
- {"dmulu.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_5}},
- {"mac.l",{A_INC_M,A_INC_N},{HEX_0,REG_N,REG_M,HEX_F}},
- {"braf",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_3}},
- {"bsrf",{A_REG_N},{HEX_0,REG_N,HEX_0,HEX_3}},
- {"fabs",{FD_REG_N},{HEX_F,REG_N,HEX_5,HEX_D}},
- {"fadd",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fadd",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fcmp/eq",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/eq",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/gt",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcmp/gt",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcnvds",{D_REG_N,FPUL_M},{HEX_F,REG_N,HEX_B,HEX_D}},
- {"fcnvsd",{FPUL_M,D_REG_N},{HEX_F,REG_N,HEX_A,HEX_D}},
- {"fdiv",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fdiv",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fipr",{V_REG_M,V_REG_N},{HEX_F,REG_NM,HEX_E,HEX_D}},
- {"fldi0",{F_REG_N},{HEX_F,REG_N,HEX_8,HEX_D}},
- {"fldi1",{F_REG_N},{HEX_F,REG_N,HEX_9,HEX_D}},
- {"flds",{F_REG_N,FPUL_M},{HEX_F,REG_N,HEX_1,HEX_D}},
- {"float",{FPUL_M,FD_REG_N},{HEX_F,REG_N,HEX_2,HEX_D}},
- {"fmac",{F_FR0,F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_E}},
- {"fmov",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{DX_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.d",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.d",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.d",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.d",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.d",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.d",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.s",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.s",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.s",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.s",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.s",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.s",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmul",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fmul",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fneg",{FD_REG_N},{HEX_F,REG_N,HEX_4,HEX_D}},
- {"frchg",{0},{HEX_F,HEX_B,HEX_F,HEX_D}},
- {"fschg",{0},{HEX_F,HEX_3,HEX_F,HEX_D}},
- {"fsqrt",{FD_REG_N},{HEX_F,REG_N,HEX_6,HEX_D}},
- {"fsts",{FPUL_M,F_REG_N},{HEX_F,REG_N,HEX_0,HEX_D}},
- {"fsub",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"fsub",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"ftrc",{FD_REG_N,FPUL_M},{HEX_F,REG_N,HEX_3,HEX_D}},
- {"ftrv",{XMTRX_M4,V_REG_N},{HEX_F,REG_NM,HEX_F,HEX_D}},
- { 0 },
-};
-
-static void print_sh_insn(u32 memaddr, u16 insn)
-{
- int relmask = ~0;
- int nibs[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, insn & 0xf};
- int lastsp;
- struct sh_opcode_info *op = sh_table;
-
- for (; op->name; op++) {
- int n;
- int imm = 0;
- int rn = 0;
- int rm = 0;
- int rb = 0;
- int disp_pc;
- int disp_pc_addr = 0;
-
- for (n = 0; n < 4; n++) {
- int i = op->nibbles[n];
-
- if (i < 16) {
- if (nibs[n] == i)
- continue;
- goto fail;
- }
- switch (i) {
- case BRANCH_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x80)
- imm |= ~0xff;
- imm = ((char)imm) * 2 + 4 ;
- goto ok;
- case BRANCH_12:
- imm = ((nibs[1]) << 8) | (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x800)
- imm |= ~0xfff;
- imm = imm * 2 + 4;
- goto ok;
- case IMM_4:
- imm = nibs[3];
- goto ok;
- case IMM_4BY2:
- imm = nibs[3] <<1;
- goto ok;
- case IMM_4BY4:
- imm = nibs[3] <<2;
- goto ok;
- case IMM_8:
- imm = (nibs[2] << 4) | nibs[3];
- goto ok;
- case PCRELIMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- relmask = ~1;
- goto ok;
- case PCRELIMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- relmask = ~3;
- goto ok;
- case IMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- goto ok;
- case IMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- goto ok;
- case DISP_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- goto ok;
- case DISP_4:
- imm = nibs[3];
- goto ok;
- case REG_N:
- rn = nibs[n];
- break;
- case REG_M:
- rm = nibs[n];
- break;
- case REG_NM:
- rn = (nibs[n] & 0xc) >> 2;
- rm = (nibs[n] & 0x3);
- break;
- case REG_B:
- rb = nibs[n] & 0x07;
- break;
- default:
- return;
- }
- }
-
- ok:
- pr_cont("%-8s ", op->name);
- lastsp = (op->arg[0] == A_END);
- disp_pc = 0;
- for (n = 0; n < 6 && op->arg[n] != A_END; n++) {
- if (n && op->arg[1] != A_END)
- pr_cont(", ");
- switch (op->arg[n]) {
- case A_IMM:
- pr_cont("#%d", (char)(imm));
- break;
- case A_R0:
- pr_cont("r0");
- break;
- case A_REG_N:
- pr_cont("r%d", rn);
- break;
- case A_INC_N:
- pr_cont("@r%d+", rn);
- break;
- case A_DEC_N:
- pr_cont("@-r%d", rn);
- break;
- case A_IND_N:
- pr_cont("@r%d", rn);
- break;
- case A_DISP_REG_N:
- pr_cont("@(%d,r%d)", imm, rn);
- break;
- case A_REG_M:
- pr_cont("r%d", rm);
- break;
- case A_INC_M:
- pr_cont("@r%d+", rm);
- break;
- case A_DEC_M:
- pr_cont("@-r%d", rm);
- break;
- case A_IND_M:
- pr_cont("@r%d", rm);
- break;
- case A_DISP_REG_M:
- pr_cont("@(%d,r%d)", imm, rm);
- break;
- case A_REG_B:
- pr_cont("r%d_bank", rb);
- break;
- case A_DISP_PC:
- disp_pc = 1;
- disp_pc_addr = imm + 4 + (memaddr & relmask);
- pr_cont("%08x <%pS>", disp_pc_addr,
- (void *)disp_pc_addr);
- break;
- case A_IND_R0_REG_N:
- pr_cont("@(r0,r%d)", rn);
- break;
- case A_IND_R0_REG_M:
- pr_cont("@(r0,r%d)", rm);
- break;
- case A_DISP_GBR:
- pr_cont("@(%d,gbr)", imm);
- break;
- case A_R0_GBR:
- pr_cont("@(r0,gbr)");
- break;
- case A_BDISP12:
- case A_BDISP8:
- pr_cont("%08x", imm + memaddr);
- break;
- case A_SR:
- pr_cont("sr");
- break;
- case A_GBR:
- pr_cont("gbr");
- break;
- case A_VBR:
- pr_cont("vbr");
- break;
- case A_SSR:
- pr_cont("ssr");
- break;
- case A_SPC:
- pr_cont("spc");
- break;
- case A_MACH:
- pr_cont("mach");
- break;
- case A_MACL:
- pr_cont("macl");
- break;
- case A_PR:
- pr_cont("pr");
- break;
- case A_SGR:
- pr_cont("sgr");
- break;
- case A_DBR:
- pr_cont("dbr");
- break;
- case FD_REG_N:
- case F_REG_N:
- pr_cont("fr%d", rn);
- break;
- case F_REG_M:
- pr_cont("fr%d", rm);
- break;
- case DX_REG_N:
- if (rn & 1) {
- pr_cont("xd%d", rn & ~1);
- break;
- }
- fallthrough;
- case D_REG_N:
- pr_cont("dr%d", rn);
- break;
- case DX_REG_M:
- if (rm & 1) {
- pr_cont("xd%d", rm & ~1);
- break;
- }
- fallthrough;
- case D_REG_M:
- pr_cont("dr%d", rm);
- break;
- case FPSCR_M:
- case FPSCR_N:
- pr_cont("fpscr");
- break;
- case FPUL_M:
- case FPUL_N:
- pr_cont("fpul");
- break;
- case F_FR0:
- pr_cont("fr0");
- break;
- case V_REG_N:
- pr_cont("fv%d", rn*4);
- break;
- case V_REG_M:
- pr_cont("fv%d", rm*4);
- break;
- case XMTRX_M4:
- pr_cont("xmtrx");
- break;
- default:
- return;
- }
- }
-
- if (disp_pc && strcmp(op->name, "mova") != 0) {
- u32 val;
-
- if (relmask == ~1)
- __get_user(val, (u16 *)disp_pc_addr);
- else
- __get_user(val, (u32 *)disp_pc_addr);
-
- pr_cont(" ! %08x <%pS>", val, (void *)val);
- }
-
- return;
- fail:
- ;
-
- }
-
- pr_info(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]);
-}
-
-void show_code(struct pt_regs *regs)
-{
- unsigned short *pc = (unsigned short *)regs->pc;
- long i;
-
- if (regs->pc & 0x1)
- return;
-
- pr_info("Code:\n");
-
- for (i = -3 ; i < 6 ; i++) {
- unsigned short insn;
-
- if (__get_user(insn, pc + i)) {
- pr_err(" (Bad address in pc)\n");
- break;
- }
-
- pr_info("%s%08lx: ", (i ? " " : "->"),
- (unsigned long)(pc + i));
- print_sh_insn((unsigned long)(pc + i), insn);
- pr_cont("\n");
- }
-
- pr_info("\n");
-}
diff --git a/arch/sh/kernel/dma-coherent.c b/arch/sh/kernel/dma-coherent.c
deleted file mode 100644
index 6a44c0e7ba40ef..00000000000000
--- a/arch/sh/kernel/dma-coherent.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/dma-map-ops.h>
-#include <asm/cacheflush.h>
-#include <asm/addrspace.h>
-
-void arch_dma_prep_coherent(struct page *page, size_t size)
-{
- __flush_purge_region(page_address(page), size);
-}
-
-void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
- enum dma_data_direction dir)
-{
- void *addr = sh_cacheop_vaddr(phys_to_virt(paddr));
-
- switch (dir) {
- case DMA_FROM_DEVICE: /* invalidate only */
- __flush_invalidate_region(addr, size);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- __flush_wback_region(addr, size);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- __flush_purge_region(addr, size);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
deleted file mode 100644
index 758a6c89e911bc..00000000000000
--- a/arch/sh/kernel/dumpstack.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2002 - 2012 Paul Mundt
- */
-#include <linux/kallsyms.h>
-#include <linux/ftrace.h>
-#include <linux/debug_locks.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kdebug.h>
-#include <linux/export.h>
-#include <linux/uaccess.h>
-#include <asm/unwinder.h>
-#include <asm/stacktrace.h>
-
-void dump_mem(const char *str, const char *loglvl, unsigned long bottom,
- unsigned long top)
-{
- unsigned long p;
- int i;
-
- printk("%s%s(0x%08lx to 0x%08lx)\n", loglvl, str, bottom, top);
-
- for (p = bottom & ~31; p < top; ) {
- printk("%s%04lx: ", loglvl, p & 0xffff);
-
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
-
- if (p < bottom || p >= top)
- pr_cont(" ");
- else {
- if (__get_user(val, (unsigned int __user *)p)) {
- pr_cont("\n");
- return;
- }
- pr_cont("%08x ", val);
- }
- }
- pr_cont("\n");
- }
-}
-
-void printk_address(unsigned long address, int reliable)
-{
- pr_cont(" [<%px>] %s%pS\n", (void *) address,
- reliable ? "" : "? ", (void *) address);
-}
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{
- struct task_struct *task = tinfo->task;
- struct ftrace_ret_stack *ret_stack;
- unsigned long ret_addr;
-
- if (addr != (unsigned long)return_to_handler)
- return;
-
- if (!task->ret_stack)
- return;
-
- ret_stack = ftrace_graph_get_ret_stack(task, *graph);
- if (!ret_stack)
- return;
-
- ret_addr = ret_stack->ret;
-
- ops->address(data, ret_addr, 1);
-
- (*graph)++;
-}
-#else
-static inline void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{ }
-#endif
-
-void
-stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- struct thread_info *context;
- int graph = 0;
-
- context = (struct thread_info *)
- ((unsigned long)sp & (~(THREAD_SIZE - 1)));
-
- while (!kstack_end(sp)) {
- unsigned long addr = *sp++;
-
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
-
- print_ftrace_graph_addr(addr, data, ops,
- context, &graph);
- }
- }
-}
-
-/*
- * Print one address/symbol entries per line.
- */
-static void print_trace_address(void *data, unsigned long addr, int reliable)
-{
- printk("%s", (char *)data);
- printk_address(addr, reliable);
-}
-
-static const struct stacktrace_ops print_trace_ops = {
- .address = print_trace_address,
-};
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl)
-{
- if (regs && user_mode(regs))
- return;
-
- printk("%s\nCall trace:\n", loglvl);
-
- unwind_stack(tsk, regs, sp, &print_trace_ops, (void *)loglvl);
-
- pr_cont("\n");
-
- if (!tsk)
- tsk = current;
-
- debug_show_held_locks(tsk);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
-{
- unsigned long stack;
-
- if (!tsk)
- tsk = current;
- if (tsk == current)
- sp = (unsigned long *)current_stack_pointer;
- else
- sp = (unsigned long *)tsk->thread.sp;
-
- stack = (unsigned long)sp;
- dump_mem("Stack: ", loglvl, stack, THREAD_SIZE +
- (unsigned long)task_stack_page(tsk));
- show_trace(tsk, sp, NULL, loglvl);
-}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
deleted file mode 100644
index bf8682e7183030..00000000000000
--- a/arch/sh/kernel/dwarf.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- *
- * This is an implementation of a DWARF unwinder. Its main purpose is
- * for generating stacktrace information. Based on the DWARF 3
- * specification from http://www.dwarfstd.org.
- *
- * TODO:
- * - DWARF64 doesn't work.
- * - Registers with DWARF_VAL_OFFSET rules aren't handled properly.
- */
-
-/* #define DEBUG */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/mempool.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/dwarf.h>
-#include <asm/unwinder.h>
-#include <asm/sections.h>
-#include <asm/unaligned.h>
-#include <asm/stacktrace.h>
-
-/* Reserve enough memory for two stack frames */
-#define DWARF_FRAME_MIN_REQ 2
-/* ... with 4 registers per frame. */
-#define DWARF_REG_MIN_REQ (DWARF_FRAME_MIN_REQ * 4)
-
-static struct kmem_cache *dwarf_frame_cachep;
-static mempool_t *dwarf_frame_pool;
-
-static struct kmem_cache *dwarf_reg_cachep;
-static mempool_t *dwarf_reg_pool;
-
-static struct rb_root cie_root;
-static DEFINE_SPINLOCK(dwarf_cie_lock);
-
-static struct rb_root fde_root;
-static DEFINE_SPINLOCK(dwarf_fde_lock);
-
-static struct dwarf_cie *cached_cie;
-
-static unsigned int dwarf_unwinder_ready;
-
-/**
- * dwarf_frame_alloc_reg - allocate memory for a DWARF register
- * @frame: the DWARF frame whose list of registers we insert on
- * @reg_num: the register number
- *
- * Allocate space for, and initialise, a dwarf reg from
- * dwarf_reg_pool and insert it onto the (unsorted) linked-list of
- * dwarf registers for @frame.
- *
- * Return the initialised DWARF reg.
- */
-static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
- if (!reg) {
- printk(KERN_WARNING "Unable to allocate a DWARF register\n");
- /*
- * Let's just bomb hard here, we have no way to
- * gracefully recover.
- */
- UNWINDER_BUG();
- }
-
- reg->number = reg_num;
- reg->addr = 0;
- reg->flags = 0;
-
- list_add(®->link, &frame->reg_list);
-
- return reg;
-}
-
-static void dwarf_frame_free_regs(struct dwarf_frame *frame)
-{
- struct dwarf_reg *reg, *n;
-
- list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
- list_del(®->link);
- mempool_free(reg, dwarf_reg_pool);
- }
-}
-
-/**
- * dwarf_frame_reg - return a DWARF register
- * @frame: the DWARF frame to search in for @reg_num
- * @reg_num: the register number to search for
- *
- * Lookup and return the dwarf reg @reg_num for this frame. Return
- * NULL if @reg_num is an register invalid number.
- */
-static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- list_for_each_entry(reg, &frame->reg_list, link) {
- if (reg->number == reg_num)
- return reg;
- }
-
- return NULL;
-}
-
-/**
- * dwarf_read_addr - read dwarf data
- * @src: source address of data
- * @dst: destination address to store the data to
- *
- * Read 'n' bytes from @src, where 'n' is the size of an address on
- * the native machine. We return the number of bytes read, which
- * should always be 'n'. We also have to be careful when reading
- * from @src and writing to @dst, because they can be arbitrarily
- * aligned. Return 'n' - the number of bytes read.
- */
-static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
-{
- u32 val = get_unaligned(src);
- put_unaligned(val, dst);
- return sizeof(unsigned long *);
-}
-
-/**
- * dwarf_read_uleb128 - read unsigned LEB128 data
- * @addr: the address where the ULEB128 data is stored
- * @ret: address to store the result
- *
- * Decode an unsigned LEB128 encoded datum. The algorithm is taken
- * from Appendix C of the DWARF 3 spec. For information on the
- * encodings refer to section "7.6 - Variable Length Data". Return
- * the number of bytes read.
- */
-static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
-{
- unsigned int result;
- unsigned char byte;
- int shift, count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- count++;
-
- result |= (byte & 0x7f) << shift;
- shift += 7;
-
- if (!(byte & 0x80))
- break;
- }
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_leb128 - read signed LEB128 data
- * @addr: the address of the LEB128 encoded data
- * @ret: address to store the result
- *
- * Decode signed LEB128 data. The algorithm is taken from Appendix
- * C of the DWARF 3 spec. Return the number of bytes read.
- */
-static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
-{
- unsigned char byte;
- int result, shift;
- int num_bits;
- int count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- result |= (byte & 0x7f) << shift;
- shift += 7;
- count++;
-
- if (!(byte & 0x80))
- break;
- }
-
- /* The number of bits in a signed integer. */
- num_bits = 8 * sizeof(result);
-
- if ((shift < num_bits) && (byte & 0x40))
- result |= (-1 << shift);
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_encoded_value - return the decoded value at @addr
- * @addr: the address of the encoded value
- * @val: where to write the decoded value
- * @encoding: the encoding with which we can decode @addr
- *
- * GCC emits encoded address in the .eh_frame FDE entries. Decode
- * the value at @addr using @encoding. The decoded value is written
- * to @val and the number of bytes read is returned.
- */
-static int dwarf_read_encoded_value(char *addr, unsigned long *val,
- char encoding)
-{
- unsigned long decoded_addr = 0;
- int count = 0;
-
- switch (encoding & 0x70) {
- case DW_EH_PE_absptr:
- break;
- case DW_EH_PE_pcrel:
- decoded_addr = (unsigned long)addr;
- break;
- default:
- pr_debug("encoding=0x%x\n", (encoding & 0x70));
- UNWINDER_BUG();
- }
-
- if ((encoding & 0x07) == 0x00)
- encoding |= DW_EH_PE_udata4;
-
- switch (encoding & 0x0f) {
- case DW_EH_PE_sdata4:
- case DW_EH_PE_udata4:
- count += 4;
- decoded_addr += get_unaligned((u32 *)addr);
- __raw_writel(decoded_addr, val);
- break;
- default:
- pr_debug("encoding=0x%x\n", encoding);
- UNWINDER_BUG();
- }
-
- return count;
-}
-
-/**
- * dwarf_entry_len - return the length of an FDE or CIE
- * @addr: the address of the entry
- * @len: the length of the entry
- *
- * Read the initial_length field of the entry and store the size of
- * the entry in @len. We return the number of bytes read. Return a
- * count of 0 on error.
- */
-static inline int dwarf_entry_len(char *addr, unsigned long *len)
-{
- u32 initial_len;
- int count;
-
- initial_len = get_unaligned((u32 *)addr);
- count = 4;
-
- /*
- * An initial length field value in the range DW_LEN_EXT_LO -
- * DW_LEN_EXT_HI indicates an extension, and should not be
- * interpreted as a length. The only extension that we currently
- * understand is the use of DWARF64 addresses.
- */
- if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
- /*
- * The 64-bit length field immediately follows the
- * compulsory 32-bit length field.
- */
- if (initial_len == DW_EXT_DWARF64) {
- *len = get_unaligned((u64 *)addr + 4);
- count = 12;
- } else {
- printk(KERN_WARNING "Unknown DWARF extension\n");
- count = 0;
- }
- } else
- *len = initial_len;
-
- return count;
-}
-
-/**
- * dwarf_lookup_cie - locate the cie
- * @cie_ptr: pointer to help with lookup
- */
-static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct dwarf_cie *cie = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- /*
- * We've cached the last CIE we looked up because chances are
- * that the FDE wants this CIE.
- */
- if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
- cie = cached_cie;
- goto out;
- }
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
- BUG_ON(!cie_tmp);
-
- if (cie_ptr == cie_tmp->cie_pointer) {
- cie = cie_tmp;
- cached_cie = cie_tmp;
- goto out;
- } else {
- if (cie_ptr < cie_tmp->cie_pointer)
- rb_node = &(*rb_node)->rb_left;
- else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
- return cie;
-}
-
-/**
- * dwarf_lookup_fde - locate the FDE that covers pc
- * @pc: the program counter
- */
-struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct dwarf_fde *fde = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
- BUG_ON(!fde_tmp);
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- if (pc < tmp_start) {
- rb_node = &(*rb_node)->rb_left;
- } else {
- if (pc < tmp_end) {
- fde = fde_tmp;
- goto out;
- } else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return fde;
-}
-
-/**
- * dwarf_cfa_execute_insns - execute instructions to calculate a CFA
- * @insn_start: address of the first instruction
- * @insn_end: address of the last instruction
- * @cie: the CIE for this function
- * @fde: the FDE for this function
- * @frame: the instructions calculate the CFA for this frame
- * @pc: the program counter of the address we're interested in
- *
- * Execute the Call Frame instruction sequence starting at
- * @insn_start and ending at @insn_end. The instructions describe
- * how to calculate the Canonical Frame Address of a stackframe.
- * Store the results in @frame.
- */
-static int dwarf_cfa_execute_insns(unsigned char *insn_start,
- unsigned char *insn_end,
- struct dwarf_cie *cie,
- struct dwarf_fde *fde,
- struct dwarf_frame *frame,
- unsigned long pc)
-{
- unsigned char insn;
- unsigned char *current_insn;
- unsigned int count, delta, reg, expr_len, offset;
- struct dwarf_reg *regp;
-
- current_insn = insn_start;
-
- while (current_insn < insn_end && frame->pc <= pc) {
- insn = __raw_readb(current_insn++);
-
- /*
- * Firstly, handle the opcodes that embed their operands
- * in the instructions.
- */
- switch (DW_CFA_opcode(insn)) {
- case DW_CFA_advance_loc:
- delta = DW_CFA_operand(insn);
- delta *= cie->code_alignment_factor;
- frame->pc += delta;
- continue;
- /* NOTREACHED */
- case DW_CFA_offset:
- reg = DW_CFA_operand(insn);
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->addr = offset;
- regp->flags |= DWARF_REG_OFFSET;
- continue;
- /* NOTREACHED */
- case DW_CFA_restore:
- reg = DW_CFA_operand(insn);
- continue;
- /* NOTREACHED */
- }
-
- /*
- * Secondly, handle the opcodes that don't embed their
- * operands in the instruction.
- */
- switch (insn) {
- case DW_CFA_nop:
- continue;
- case DW_CFA_advance_loc1:
- delta = *current_insn++;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc2:
- delta = get_unaligned((u16 *)current_insn);
- current_insn += 2;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc4:
- delta = get_unaligned((u32 *)current_insn);
- current_insn += 4;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- break;
- case DW_CFA_restore_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- break;
- case DW_CFA_undefined:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_UNDEFINED;
- break;
- case DW_CFA_def_cfa:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_offset);
- current_insn += count;
-
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_register:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_offset:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- frame->cfa_offset = offset;
- break;
- case DW_CFA_def_cfa_expression:
- count = dwarf_read_uleb128(current_insn, &expr_len);
- current_insn += count;
-
- frame->cfa_expr = current_insn;
- frame->cfa_expr_len = expr_len;
- current_insn += expr_len;
-
- frame->flags |= DWARF_FRAME_CFA_REG_EXP;
- break;
- case DW_CFA_offset_extended_sf:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_val_offset:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_VAL_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_GNU_args_size:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- break;
- case DW_CFA_GNU_negative_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
-
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = -offset;
- break;
- default:
- pr_debug("unhandled DWARF instruction 0x%x\n", insn);
- UNWINDER_BUG();
- break;
- }
- }
-
- return 0;
-}
-
-/**
- * dwarf_free_frame - free the memory allocated for @frame
- * @frame: the frame to free
- */
-void dwarf_free_frame(struct dwarf_frame *frame)
-{
- dwarf_frame_free_regs(frame);
- mempool_free(frame, dwarf_frame_pool);
-}
-
-extern void ret_from_irq(void);
-
-/**
- * dwarf_unwind_stack - unwind the stack
- *
- * @pc: address of the function to unwind
- * @prev: struct dwarf_frame of the previous stackframe on the callstack
- *
- * Return a struct dwarf_frame representing the most recent frame
- * on the callstack. Each of the lower (older) stack frames are
- * linked via the "prev" member.
- */
-struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
- struct dwarf_frame *prev)
-{
- struct dwarf_frame *frame;
- struct dwarf_cie *cie;
- struct dwarf_fde *fde;
- struct dwarf_reg *reg;
- unsigned long addr;
-
- /*
- * If we've been called in to before initialization has
- * completed, bail out immediately.
- */
- if (!dwarf_unwinder_ready)
- return NULL;
-
- /*
- * If we're starting at the top of the stack we need get the
- * contents of a physical register to get the CFA in order to
- * begin the virtual unwinding of the stack.
- *
- * NOTE: the return address is guaranteed to be setup by the
- * time this function makes its first function call.
- */
- if (!pc || !prev)
- pc = _THIS_IP_;
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- /*
- * If our stack has been patched by the function graph tracer
- * then we might see the address of return_to_handler() where we
- * expected to find the real return address.
- */
- if (pc == (unsigned long)&return_to_handler) {
- struct ftrace_ret_stack *ret_stack;
-
- ret_stack = ftrace_graph_get_ret_stack(current, 0);
- if (ret_stack)
- pc = ret_stack->ret;
- /*
- * We currently have no way of tracking how many
- * return_to_handler()'s we've seen. If there is more
- * than one patched return address on our stack,
- * complain loudly.
- */
- WARN_ON(ftrace_graph_get_ret_stack(current, 1));
- }
-#endif
-
- frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
- if (!frame) {
- printk(KERN_ERR "Unable to allocate a dwarf frame\n");
- UNWINDER_BUG();
- }
-
- INIT_LIST_HEAD(&frame->reg_list);
- frame->flags = 0;
- frame->prev = prev;
- frame->return_addr = 0;
-
- fde = dwarf_lookup_fde(pc);
- if (!fde) {
- /*
- * This is our normal exit path. There are two reasons
- * why we might exit here,
- *
- * a) pc has no asscociated DWARF frame info and so
- * we don't know how to unwind this frame. This is
- * usually the case when we're trying to unwind a
- * frame that was called from some assembly code
- * that has no DWARF info, e.g. syscalls.
- *
- * b) the DEBUG info for pc is bogus. There's
- * really no way to distinguish this case from the
- * case above, which sucks because we could print a
- * warning here.
- */
- goto bail;
- }
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
-
- frame->pc = fde->initial_location;
-
- /* CIE initial instructions */
- dwarf_cfa_execute_insns(cie->initial_instructions,
- cie->instructions_end, cie, fde,
- frame, pc);
-
- /* FDE instructions */
- dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
- fde, frame, pc);
-
- /* Calculate the CFA */
- switch (frame->flags) {
- case DWARF_FRAME_CFA_REG_OFFSET:
- if (prev) {
- reg = dwarf_frame_reg(prev, frame->cfa_register);
- UNWINDER_BUG_ON(!reg);
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = prev->cfa + reg->addr;
- frame->cfa = __raw_readl(addr);
-
- } else {
- /*
- * Again, we're starting from the top of the
- * stack. We need to physically read
- * the contents of a register in order to get
- * the Canonical Frame Address for this
- * function.
- */
- frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
- }
-
- frame->cfa += frame->cfa_offset;
- break;
- default:
- UNWINDER_BUG();
- }
-
- reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
-
- /*
- * If we haven't seen the return address register or the return
- * address column is undefined then we must assume that this is
- * the end of the callstack.
- */
- if (!reg || reg->flags == DWARF_UNDEFINED)
- goto bail;
-
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = frame->cfa + reg->addr;
- frame->return_addr = __raw_readl(addr);
-
- /*
- * Ah, the joys of unwinding through interrupts.
- *
- * Interrupts are tricky - the DWARF info needs to be _really_
- * accurate and unfortunately I'm seeing a lot of bogus DWARF
- * info. For example, I've seen interrupts occur in epilogues
- * just after the frame pointer (r14) had been restored. The
- * problem was that the DWARF info claimed that the CFA could be
- * reached by using the value of the frame pointer before it was
- * restored.
- *
- * So until the compiler can be trusted to produce reliable
- * DWARF info when it really matters, let's stop unwinding once
- * we've calculated the function that was interrupted.
- */
- if (prev && prev->pc == (unsigned long)ret_from_irq)
- frame->return_addr = 0;
-
- return frame;
-
-bail:
- dwarf_free_frame(frame);
- return NULL;
-}
-
-static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
-
- cie = kzalloc(sizeof(*cie), GFP_KERNEL);
- if (!cie)
- return -ENOMEM;
-
- cie->length = len;
-
- /*
- * Record the offset into the .eh_frame section
- * for this CIE. It allows this CIE to be
- * quickly and easily looked up from the
- * corresponding FDE.
- */
- cie->cie_pointer = (unsigned long)entry;
-
- cie->version = *(char *)p++;
- UNWINDER_BUG_ON(cie->version != 1);
-
- cie->augmentation = p;
- p += strlen(cie->augmentation) + 1;
-
- count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
- p += count;
-
- count = dwarf_read_leb128(p, &cie->data_alignment_factor);
- p += count;
-
- /*
- * Which column in the rule table contains the
- * return address?
- */
- if (cie->version == 1) {
- cie->return_address_reg = __raw_readb(p);
- p++;
- } else {
- count = dwarf_read_uleb128(p, &cie->return_address_reg);
- p += count;
- }
-
- if (cie->augmentation[0] == 'z') {
- unsigned int length, count;
- cie->flags |= DWARF_CIE_Z_AUGMENTATION;
-
- count = dwarf_read_uleb128(p, &length);
- p += count;
-
- UNWINDER_BUG_ON((unsigned char *)p > end);
-
- cie->initial_instructions = p + length;
- cie->augmentation++;
- }
-
- while (*cie->augmentation) {
- /*
- * "L" indicates a byte showing how the
- * LSDA pointer is encoded. Skip it.
- */
- if (*cie->augmentation == 'L') {
- p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'R') {
- /*
- * "R" indicates a byte showing
- * how FDE addresses are
- * encoded.
- */
- cie->encoding = *(char *)p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'P') {
- /*
- * "R" indicates a personality
- * routine in the CIE
- * augmentation.
- */
- UNWINDER_BUG();
- } else if (*cie->augmentation == 'S') {
- UNWINDER_BUG();
- } else {
- /*
- * Unknown augmentation. Assume
- * 'z' augmentation.
- */
- p = cie->initial_instructions;
- UNWINDER_BUG_ON(!p);
- break;
- }
- }
-
- cie->initial_instructions = p;
- cie->instructions_end = end;
-
- /* Add to list */
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
-
- parent = *rb_node;
-
- if (cie->cie_pointer < cie_tmp->cie_pointer)
- rb_node = &parent->rb_left;
- else if (cie->cie_pointer >= cie_tmp->cie_pointer)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&cie->node, parent, rb_node);
- rb_insert_color(&cie->node, &cie_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&cie->link, &mod->arch.cie_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- return 0;
-}
-
-static int dwarf_parse_fde(void *entry, u32 entry_type,
- void *start, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_fde *fde;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
- void *p = start;
-
- fde = kzalloc(sizeof(*fde), GFP_KERNEL);
- if (!fde)
- return -ENOMEM;
-
- fde->length = len;
-
- /*
- * In a .eh_frame section the CIE pointer is the
- * delta between the address within the FDE
- */
- fde->cie_pointer = (unsigned long)(p - entry_type - 4);
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
- fde->cie = cie;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->initial_location,
- cie->encoding);
- else
- count = dwarf_read_addr(p, &fde->initial_location);
-
- p += count;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->address_range,
- cie->encoding & 0x0f);
- else
- count = dwarf_read_addr(p, &fde->address_range);
-
- p += count;
-
- if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
- unsigned int length;
- count = dwarf_read_uleb128(p, &length);
- p += count + length;
- }
-
- /* Call frame instructions. */
- fde->instructions = p;
- fde->end = end;
-
- /* Add to list. */
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
- unsigned long start, end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
-
- start = fde->initial_location;
- end = fde->initial_location + fde->address_range;
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- parent = *rb_node;
-
- if (start < tmp_start)
- rb_node = &parent->rb_left;
- else if (start >= tmp_end)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&fde->node, parent, rb_node);
- rb_insert_color(&fde->node, &fde_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&fde->link, &mod->arch.fde_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return 0;
-}
-
-static void dwarf_unwinder_dump(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *sp,
- const struct stacktrace_ops *ops,
- void *data)
-{
- struct dwarf_frame *frame, *_frame;
- unsigned long return_addr;
-
- _frame = NULL;
- return_addr = 0;
-
- while (1) {
- frame = dwarf_unwind_stack(return_addr, _frame);
-
- if (_frame)
- dwarf_free_frame(_frame);
-
- _frame = frame;
-
- if (!frame || !frame->return_addr)
- break;
-
- return_addr = frame->return_addr;
- ops->address(data, return_addr, 1);
- }
-
- if (frame)
- dwarf_free_frame(frame);
-}
-
-static struct unwinder dwarf_unwinder = {
- .name = "dwarf-unwinder",
- .dump = dwarf_unwinder_dump,
- .rating = 150,
-};
-
-static void __init dwarf_unwinder_cleanup(void)
-{
- struct dwarf_fde *fde, *next_fde;
- struct dwarf_cie *cie, *next_cie;
-
- /*
- * Deallocate all the memory allocated for the DWARF unwinder.
- * Traverse all the FDE/CIE lists and remove and free all the
- * memory associated with those data structures.
- */
- rbtree_postorder_for_each_entry_safe(fde, next_fde, &fde_root, node)
- kfree(fde);
-
- rbtree_postorder_for_each_entry_safe(cie, next_cie, &cie_root, node)
- kfree(cie);
-
- mempool_destroy(dwarf_reg_pool);
- mempool_destroy(dwarf_frame_pool);
- kmem_cache_destroy(dwarf_reg_cachep);
- kmem_cache_destroy(dwarf_frame_cachep);
-}
-
-/**
- * dwarf_parse_section - parse DWARF section
- * @eh_frame_start: start address of the .eh_frame section
- * @eh_frame_end: end address of the .eh_frame section
- * @mod: the kernel module containing the .eh_frame section
- *
- * Parse the information in a .eh_frame section.
- */
-static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
- struct module *mod)
-{
- u32 entry_type;
- void *p, *entry;
- int count, err = 0;
- unsigned long len = 0;
- unsigned int c_entries, f_entries;
- unsigned char *end;
-
- c_entries = 0;
- f_entries = 0;
- entry = eh_frame_start;
-
- while ((char *)entry < eh_frame_end) {
- p = entry;
-
- count = dwarf_entry_len(p, &len);
- if (count == 0) {
- /*
- * We read a bogus length field value. There is
- * nothing we can do here apart from disabling
- * the DWARF unwinder. We can't even skip this
- * entry and move to the next one because 'len'
- * tells us where our next entry is.
- */
- err = -EINVAL;
- goto out;
- } else
- p += count;
-
- /* initial length does not include itself */
- end = p + len;
-
- entry_type = get_unaligned((u32 *)p);
- p += 4;
-
- if (entry_type == DW_EH_FRAME_CIE) {
- err = dwarf_parse_cie(entry, p, len, end, mod);
- if (err < 0)
- goto out;
- else
- c_entries++;
- } else {
- err = dwarf_parse_fde(entry, entry_type, p, len,
- end, mod);
- if (err < 0)
- goto out;
- else
- f_entries++;
- }
-
- entry = (char *)entry + len + 4;
- }
-
- printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
- c_entries, f_entries);
-
- return 0;
-
-out:
- return err;
-}
-
-#ifdef CONFIG_MODULES
-int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *me)
-{
- unsigned int i, err;
- unsigned long start, end;
- char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
- start = end = 0;
-
- for (i = 1; i < hdr->e_shnum; i++) {
- /* Alloc bit cleared means "ignore it." */
- if ((sechdrs[i].sh_flags & SHF_ALLOC)
- && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
- start = sechdrs[i].sh_addr;
- end = start + sechdrs[i].sh_size;
- break;
- }
- }
-
- /* Did we find the .eh_frame section? */
- if (i != hdr->e_shnum) {
- INIT_LIST_HEAD(&me->arch.cie_list);
- INIT_LIST_HEAD(&me->arch.fde_list);
- err = dwarf_parse_section((char *)start, (char *)end, me);
- if (err) {
- printk(KERN_WARNING "%s: failed to parse DWARF info\n",
- me->name);
- return err;
- }
- }
-
- return 0;
-}
-
-/**
- * module_dwarf_cleanup - remove FDE/CIEs associated with @mod
- * @mod: the module that is being unloaded
- *
- * Remove any FDEs and CIEs from the global lists that came from
- * @mod's .eh_frame section because @mod is being unloaded.
- */
-void module_dwarf_cleanup(struct module *mod)
-{
- struct dwarf_fde *fde, *ftmp;
- struct dwarf_cie *cie, *ctmp;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
- list_del(&cie->link);
- rb_erase(&cie->node, &cie_root);
- kfree(cie);
- }
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
- list_del(&fde->link);
- rb_erase(&fde->node, &fde_root);
- kfree(fde);
- }
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-}
-#endif /* CONFIG_MODULES */
-
-/**
- * dwarf_unwinder_init - initialise the dwarf unwinder
- *
- * Build the data structures describing the .dwarf_frame section to
- * make it easier to lookup CIE and FDE entries. Because the
- * .eh_frame section is packed as tightly as possible it is not
- * easy to lookup the FDE for a given PC, so we build a list of FDE
- * and CIE entries that make it easier.
- */
-static int __init dwarf_unwinder_init(void)
-{
- int err = -ENOMEM;
-
- dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
- sizeof(struct dwarf_frame), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
- sizeof(struct dwarf_reg), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_frame_pool = mempool_create_slab_pool(DWARF_FRAME_MIN_REQ,
- dwarf_frame_cachep);
- if (!dwarf_frame_pool)
- goto out;
-
- dwarf_reg_pool = mempool_create_slab_pool(DWARF_REG_MIN_REQ,
- dwarf_reg_cachep);
- if (!dwarf_reg_pool)
- goto out;
-
- err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
- if (err)
- goto out;
-
- err = unwinder_register(&dwarf_unwinder);
- if (err)
- goto out;
-
- dwarf_unwinder_ready = 1;
-
- return 0;
-
-out:
- printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
- dwarf_unwinder_cleanup();
- return err;
-}
-early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
deleted file mode 100644
index 91ab2607a1ff9f..00000000000000
--- a/arch/sh/kernel/entry-common.S
+++ /dev/null
@@ -1,400 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-#include <asm/dwarf.h>
-
-#if defined(CONFIG_PREEMPTION)
-# define preempt_stop() cli ; TRACE_IRQS_OFF
-#else
-# define preempt_stop()
-# define resume_kernel __restore_all
-#endif
-
-
- .align 2
-ENTRY(exception_error)
- !
- TRACE_IRQS_ON
- sti
- mov.l 1f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long do_exception_error
-
- .align 2
-ret_from_exception:
- CFI_STARTPROC simple
- CFI_DEF_CFA r14, 0
- CFI_REL_OFFSET 17, 64
- CFI_REL_OFFSET 15, 60
- CFI_REL_OFFSET 14, 56
- CFI_REL_OFFSET 13, 52
- CFI_REL_OFFSET 12, 48
- CFI_REL_OFFSET 11, 44
- CFI_REL_OFFSET 10, 40
- CFI_REL_OFFSET 9, 36
- CFI_REL_OFFSET 8, 32
- preempt_stop()
-ENTRY(ret_from_irq)
- !
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shll r0
- shll r0 ! kernel space?
- get_current_thread_info r8, r0
- bt resume_kernel ! Yes, it's from kernel, go back soon
-
-#ifdef CONFIG_PREEMPTION
- bra resume_userspace
- nop
-ENTRY(resume_kernel)
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
- tst r0, r0
- bf noresched
-need_resched:
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
- bt noresched
-
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shlr r0
- and #(0xf0>>1), r0 ! interrupts off (exception path)?
- cmp/eq #(0xf0>>1), r0
- bt noresched
- mov.l 1f, r0
- jsr @r0 ! call preempt_schedule_irq
- nop
- bra need_resched
- nop
-
-noresched:
- bra __restore_all
- nop
-
- .align 2
-1: .long preempt_schedule_irq
-#endif
-
-ENTRY(resume_userspace)
- ! r8: current_thread_info
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt/s __restore_all
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-work_pending:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- ! t: result of "tst #_TIF_NEED_RESCHED, r0"
- bf/s work_resched
- tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
-work_notifysig:
- bt/s __restore_all
- mov r15, r4
- mov r12, r5 ! set arg1(save_r0)
- mov r0, r6
- sti
- mov.l 2f, r1
- mov.l 3f, r0
- jmp @r1
- lds r0, pr
-work_resched:
- mov.l 1f, r1
- jsr @r1 ! schedule
- nop
- cli
- TRACE_IRQS_OFF
- !
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt __restore_all
- bra work_pending
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-1: .long schedule
-2: .long do_notify_resume
-3: .long resume_userspace
-
- .align 2
-syscall_exit_work:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- tst #(_TIF_WORK_SYSCALL_MASK & 0xff), r0
- bt/s work_pending
- tst #_TIF_NEED_RESCHED, r0
- TRACE_IRQS_ON
- sti
- mov r15, r4
- mov.l 8f, r0 ! do_syscall_trace_leave
- jsr @r0
- nop
- bra resume_userspace
- nop
-
-__restore_all:
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
-
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bt 1f
- TRACE_IRQS_ON
- bra 2f
- nop
-1:
- TRACE_IRQS_OFF
-2:
- mov.l 3f, r0
- jmp @r0
- nop
-
- .align 2
-3: .long restore_all
-
- .align 2
-syscall_badsys: ! Bad syscall number
- get_current_thread_info r8, r0
- mov #-ENOSYS, r0
- bra resume_userspace
- mov.l r0, @(OFF_R0,r15) ! Return value
-
-/*
- * The main debug trap handler.
- *
- * r8=TRA (not the trap number!)
- *
- * Note: This assumes that the trapa value is left in its original
- * form (without the shlr2 shift) so the calculation for the jump
- * call table offset remains a simple in place mask.
- */
-debug_trap:
- mov r8, r0
- and #(0xf << 2), r0
- mov.l 1f, r8
- add r0, r8
- mov.l @r8, r8
- jsr @r8
- nop
- bra ret_from_exception
- nop
- CFI_ENDPROC
-
- .align 2
-1: .long debug_trap_table
-
-/*
- * Syscall interface:
- *
- * Syscall #: R3
- * Arguments #0 to #3: R4--R7
- * Arguments #4 to #6: R0, R1, R2
- * TRA: See following table.
- *
- * (TRA>>2) Purpose
- * -------- -------
- * 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
- * 0x10-0x1f general SH-3/4 syscall ABI.
- * 0x1f unified SH-2/3/4 syscall ABI (preferred).
- * 0x20-0x2f original SH-2 syscall ABI.
- * 0x30-0x3f debug traps used by the kernel.
- * 0x40-0xff Not supported by all parts, so left unhandled.
- *
- * For making system calls, any trap number in the range for the
- * given cpu model may be used, but the unified trap number 0x1f is
- * preferred for compatibility with all models.
- *
- * The low bits of the trap number were once documented as matching
- * the number of arguments, but they were never actually used as such
- * by the kernel. SH-2 originally used its own separate trap range
- * because several hardware exceptions fell in the range used for the
- * SH-3/4 syscall ABI.
- *
- * This code also handles delegating other traps to the BIOS/gdb stub.
- *
- * Note: When we're first called, the TRA value must be shifted
- * right 2 bits in order to get the value that was used as the "trapa"
- * argument.
- */
-
- .align 2
- .globl ret_from_fork
-ret_from_fork:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- bra syscall_exit
- nop
-
- .align 2
- .globl ret_from_kernel_thread
-ret_from_kernel_thread:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- mov.l @(OFF_R5,r15), r5 ! fn
- jsr @r5
- mov.l @(OFF_R4,r15), r4 ! arg
- bra syscall_exit
- nop
-
- .align 2
-1: .long schedule_tail
-
-/*
- * The poorly named main trapa decode and dispatch routine, for
- * system calls and debug traps through their respective jump tables.
- */
-ENTRY(system_call)
- setup_frame_reg
-#if !defined(CONFIG_CPU_SH2)
- mov.l 1f, r9
- mov.l @r9, r8 ! Read from TRA (Trap Address) Register
-#endif
-
- mov #OFF_TRA, r10
- add r15, r10
- mov.l r8, @r10 ! set TRA value to tra
-
- /*
- * Check the trap type
- */
- mov #((0x20 << 2) - 1), r9
- cmp/hi r9, r8
- bt/s debug_trap ! it's a debug trap..
- nop
-
- TRACE_IRQS_ON
- sti
-
- !
- get_current_thread_info r8, r10
- mov.l @(TI_FLAGS,r8), r8
- mov #(_TIF_WORK_SYSCALL_MASK & 0xff), r10
- mov #(_TIF_WORK_SYSCALL_MASK >> 8), r9
- tst r10, r8
- shll8 r9
- bf syscall_trace_entry
- tst r9, r8
- bf syscall_trace_entry
- !
- mov.l 6f, r8 ! Number of syscalls
- cmp/hs r8, r3
- bt syscall_badsys
- !
-syscall_call:
- shll2 r3 ! x4
- mov.l 3f, r8 ! Load the address of sys_call_table
- add r8, r3
- mov.l @r3, r8
- mov.l @(OFF_R2,r15), r2
- mov.l @(OFF_R1,r15), r1
- mov.l @(OFF_R0,r15), r0
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
- jsr @r8 ! jump to specific syscall handler
- nop
- add #12, r15
- mov.l @(OFF_R0,r15), r12 ! save r0
- mov.l r0, @(OFF_R0,r15) ! save the return value
- !
-syscall_exit:
- cli
- TRACE_IRQS_OFF
- !
- get_current_thread_info r8, r0
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_ALLWORK_MASK & 0xff), r0
- mov #(_TIF_ALLWORK_MASK >> 8), r1
- bf syscall_exit_work
- shlr8 r0
- tst r0, r1
- bf syscall_exit_work
- bra __restore_all
- nop
-
- .align 2
-syscall_trace_entry:
- ! Yes it is traced.
- mov r15, r4
- mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies
- jsr @r11 ! superior (will chomp R[0-7])
- nop
- cmp/eq #-1, r0
- bt syscall_exit
- ! Reload R0-R4 from kernel stack, where the
- ! parent may have modified them using
- ! ptrace(POKEUSR). (Note that R0-R2 are
- ! reloaded from the kernel stack by syscall_call
- ! below, so don't need to be reloaded here.)
- ! This allows the parent to rewrite system calls
- ! and args on the fly.
- mov.l @(OFF_R4,r15), r4 ! arg0
- mov.l @(OFF_R5,r15), r5
- mov.l @(OFF_R6,r15), r6
- mov.l @(OFF_R7,r15), r7 ! arg3
- mov.l @(OFF_R3,r15), r3 ! syscall_nr
- !
- mov.l 6f, r10 ! Number of syscalls
- cmp/hs r10, r3
- bf syscall_call
- mov #-ENOSYS, r0
- bra syscall_exit
- mov.l r0, @(OFF_R0,r15) ! Return value
-
- .align 2
-#if !defined(CONFIG_CPU_SH2)
-1: .long TRA
-#endif
-6: .long NR_syscalls
-3: .long sys_call_table
-7: .long do_syscall_trace_enter
-8: .long do_syscall_trace_leave
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
deleted file mode 100644
index 930001bb8c6a67..00000000000000
--- a/arch/sh/kernel/ftrace.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org>
- * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org>
- *
- * Code for replacing ftrace calls with jumps.
- *
- * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- *
- * Thanks goes to Ingo Molnar, for suggesting the idea.
- * Mathieu Desnoyers, for suggesting postponing the modifications.
- * Arjan van de Ven, for keeping me straight, and explaining to me
- * the dangers of modifying code on the run.
- */
-#include <linux/uaccess.h>
-#include <linux/ftrace.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/ftrace.h>
-#include <asm/cacheflush.h>
-#include <asm/unistd.h>
-#include <trace/syscall.h>
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
-
-static unsigned char ftrace_nop[4];
-/*
- * If we're trying to nop out a call to a function, we instead
- * place a call to the address after the memory table.
- *
- * 8c011060 <a>:
- * 8c011060: 02 d1 mov.l 8c01106c <a+0xc>,r1
- * 8c011062: 22 4f sts.l pr,@-r15
- * 8c011064: 02 c7 mova 8c011070 <a+0x10>,r0
- * 8c011066: 2b 41 jmp @r1
- * 8c011068: 2a 40 lds r0,pr
- * 8c01106a: 09 00 nop
- * 8c01106c: 68 24 .word 0x2468 <--- ip
- * 8c01106e: 1d 8c .word 0x8c1d
- * 8c011070: 26 4f lds.l @r15+,pr <--- ip + MCOUNT_INSN_SIZE
- *
- * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch
- * past the _mcount call and continue executing code like normal.
- */
-static unsigned char *ftrace_nop_replace(unsigned long ip)
-{
- __raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop);
- return ftrace_nop;
-}
-
-static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
-{
- /* Place the address in the memory table. */
- __raw_writel(addr, ftrace_replaced_code);
-
- /*
- * No locking needed, this must be called via kstop_machine
- * which in essence is like running on a uniprocessor machine.
- */
- return ftrace_replaced_code;
-}
-
-/*
- * Modifying code must take extra care. On an SMP machine, if
- * the code being modified is also being executed on another CPU
- * that CPU will have undefined results and possibly take a GPF.
- * We use kstop_machine to stop other CPUS from executing code.
- * But this does not stop NMIs from happening. We still need
- * to protect against that. We separate out the modification of
- * the code to take care of this.
- *
- * Two buffers are added: An IP buffer and a "code" buffer.
- *
- * 1) Put the instruction pointer into the IP buffer
- * and the new code into the "code" buffer.
- * 2) Wait for any running NMIs to finish and set a flag that says
- * we are modifying code, it is done in an atomic operation.
- * 3) Write the code
- * 4) clear the flag.
- * 5) Wait for any running NMIs to finish.
- *
- * If an NMI is executed, the first thing it does is to call
- * "ftrace_nmi_enter". This will check if the flag is set to write
- * and if it is, it will write what is in the IP and "code" buffers.
- *
- * The trick is, it does not matter if everyone is writing the same
- * content to the code location. Also, if a CPU is executing code
- * it is OK to write to that code location if the contents being written
- * are the same as what exists.
- */
-#define MOD_CODE_WRITE_FLAG (1 << 31) /* set when NMI should do the write */
-static atomic_t nmi_running = ATOMIC_INIT(0);
-static int mod_code_status; /* holds return value of text write */
-static void *mod_code_ip; /* holds the IP to write to */
-static void *mod_code_newcode; /* holds the text to write to the IP */
-
-static void clear_mod_flag(void)
-{
- int old = atomic_read(&nmi_running);
-
- for (;;) {
- int new = old & ~MOD_CODE_WRITE_FLAG;
-
- if (old == new)
- break;
-
- old = atomic_cmpxchg(&nmi_running, old, new);
- }
-}
-
-static void ftrace_mod_code(void)
-{
- /*
- * Yes, more than one CPU process can be writing to mod_code_status.
- * (and the code itself)
- * But if one were to fail, then they all should, and if one were
- * to succeed, then they all should.
- */
- mod_code_status = copy_to_kernel_nofault(mod_code_ip, mod_code_newcode,
- MCOUNT_INSN_SIZE);
-
- /* if we fail, then kill any new writers */
- if (mod_code_status)
- clear_mod_flag();
-}
-
-void arch_ftrace_nmi_enter(void)
-{
- if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
- smp_rmb();
- ftrace_mod_code();
- }
- /* Must have previous changes seen before executions */
- smp_mb();
-}
-
-void arch_ftrace_nmi_exit(void)
-{
- /* Finish all executions before clearing nmi_running */
- smp_mb();
- atomic_dec(&nmi_running);
-}
-
-static void wait_for_nmi_and_set_mod_flag(void)
-{
- if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
- return;
-
- do {
- cpu_relax();
- } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
-}
-
-static void wait_for_nmi(void)
-{
- if (!atomic_read(&nmi_running))
- return;
-
- do {
- cpu_relax();
- } while (atomic_read(&nmi_running));
-}
-
-static int
-do_ftrace_mod_code(unsigned long ip, void *new_code)
-{
- mod_code_ip = (void *)ip;
- mod_code_newcode = new_code;
-
- /* The buffers need to be visible before we let NMIs write them */
- smp_mb();
-
- wait_for_nmi_and_set_mod_flag();
-
- /* Make sure all running NMIs have finished before we write the code */
- smp_mb();
-
- ftrace_mod_code();
-
- /* Make sure the write happens before clearing the bit */
- smp_mb();
-
- clear_mod_flag();
- wait_for_nmi();
-
- return mod_code_status;
-}
-
-static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
- unsigned char *new_code)
-{
- unsigned char replaced[MCOUNT_INSN_SIZE];
-
- /*
- * Note:
- * We are paranoid about modifying text, as if a bug was to happen, it
- * could cause us to read or write to someplace that could cause harm.
- * Carefully read and modify the code with probe_kernel_*(), and make
- * sure what we read is what we expected it to be before modifying it.
- */
-
- /* read the text we want to modify */
- if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- /* Make sure it is what we expect it to be */
- if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
- return -EINVAL;
-
- /* replace the text with the new text */
- if (do_ftrace_mod_code(ip, new_code))
- return -EPERM;
-
- flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
-
- return 0;
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
- unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET;
- unsigned char old[MCOUNT_INSN_SIZE], *new;
-
- memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
-
- return ftrace_modify_code(ip, old, new);
-}
-
-int ftrace_make_nop(struct module *mod,
- struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_call_replace(ip, addr);
- new = ftrace_nop_replace(ip);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_nop_replace(ip);
- new = ftrace_call_replace(ip, addr);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void ftrace_graph_call(void);
-
-static int ftrace_mod(unsigned long ip, unsigned long old_addr,
- unsigned long new_addr)
-{
- unsigned char code[MCOUNT_INSN_SIZE];
-
- if (copy_from_kernel_nofault(code, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- if (old_addr != __raw_readl((unsigned long *)code))
- return -EINVAL;
-
- __raw_writel(new_addr, ip);
- return 0;
-}
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&skip_trace);
- new_addr = (unsigned long)(&ftrace_graph_caller);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&ftrace_graph_caller);
- new_addr = (unsigned long)(&skip_trace);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-/*
- * Hook the return address and push it in the stack of return addrs
- * in the current thread info.
- *
- * This is the main routine for the function graph tracer. The function
- * graph tracer essentially works like this:
- *
- * parent is the stack address containing self_addr's return address.
- * We pull the real return address out of parent and store it in
- * current's ret_stack. Then, we replace the return address on the stack
- * with the address of return_to_handler. self_addr is the function that
- * called mcount.
- *
- * When self_addr returns, it will jump to return_to_handler which calls
- * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
- * return address off of current's ret_stack and jump to it.
- */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
-{
- unsigned long old;
- int faulted;
- unsigned long return_hooker = (unsigned long)&return_to_handler;
-
- if (unlikely(ftrace_graph_is_dead()))
- return;
-
- if (unlikely(atomic_read(¤t->tracing_graph_pause)))
- return;
-
- /*
- * Protect against fault, even if it shouldn't
- * happen. This tool is too much intrusive to
- * ignore such a protection.
- */
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%2, %0 \n\t"
- "2: \n\t"
- "mov.l %3, @%2 \n\t"
- "mov #0, %1 \n\t"
- "3: \n\t"
- ".section .fixup, \"ax\" \n\t"
- "4: \n\t"
- "mov.l 5f, %0 \n\t"
- "jmp @%0 \n\t"
- " mov #1, %1 \n\t"
- ".balign 4 \n\t"
- "5: .long 3b \n\t"
- ".previous \n\t"
- ".section __ex_table,\"a\" \n\t"
- ".long 1b, 4b \n\t"
- ".long 2b, 4b \n\t"
- ".previous \n\t"
- : "=&r" (old), "=r" (faulted)
- : "r" (parent), "r" (return_hooker)
- );
-
- if (unlikely(faulted)) {
- ftrace_graph_stop();
- WARN_ON(1);
- return;
- }
-
- if (function_graph_enter(old, self_addr, 0, NULL))
- __raw_writel(old, parent);
-}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
deleted file mode 100644
index 4adbd4ade31946..00000000000000
--- a/arch/sh/kernel/head_32.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- * $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $
- *
- * arch/sh/kernel/head.S
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2010 Matt Fleming
- *
- * Head.S contains the SH exception handlers and startup code.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/mmu.h>
-#include <cpu/mmu_context.h>
-
-#ifdef CONFIG_CPU_SH4A
-#define SYNCO() synco
-
-#define PREFI(label, reg) \
- mov.l label, reg; \
- prefi @reg
-#else
-#define SYNCO()
-#define PREFI(label, reg)
-#endif
-
- .section .empty_zero_page, "aw"
-ENTRY(empty_zero_page)
- .long 1 /* MOUNT_ROOT_RDONLY */
- .long 0 /* RAMDISK_FLAGS */
- .long 0x0200 /* ORIG_ROOT_DEV */
- .long 1 /* LOADER_TYPE */
- .long 0x00000000 /* INITRD_START */
- .long 0x00000000 /* INITRD_SIZE */
-#ifdef CONFIG_32BIT
- .long 0x53453f00 + 32 /* "SE?" = 32 bit */
-#else
- .long 0x53453f00 + 29 /* "SE?" = 29 bit */
-#endif
-1:
- .skip PAGE_SIZE - empty_zero_page - 1b
-
- __HEAD
-
-/*
- * Condition at the entry of _stext:
- *
- * BSC has already been initialized.
- * INTC may or may not be initialized.
- * VBR may or may not be initialized.
- * MMU may or may not be initialized.
- * Cache may or may not be initialized.
- * Hardware (including on-chip modules) may or may not be initialized.
- *
- */
-ENTRY(_stext)
- ! Initialize Status Register
- mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF
- ldc r0, sr
- ! Initialize global interrupt mask
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov #0, r0
- ldc r0, r6_bank
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov r4, r12 ! Store device tree blob pointer in r12
-#endif
-
- /*
- * Prefetch if possible to reduce cache miss penalty.
- *
- * We do this early on for SH-4A as a micro-optimization,
- * as later on we will have speculative execution enabled
- * and this will become less of an issue.
- */
- PREFI(5f, r0)
- PREFI(6f, r0)
-
- !
- mov.l 2f, r0
- mov r0, r15 ! Set initial r15 (stack pointer)
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov.l 7f, r0
- ldc r0, r7_bank ! ... and initial thread_info
-#endif
-
-#ifdef CONFIG_PMB
-/*
- * Reconfigure the initial PMB mappings setup by the hardware.
- *
- * When we boot in 32-bit MMU mode there are 2 PMB entries already
- * setup for us.
- *
- * Entry VPN PPN V SZ C UB WT
- * ---------------------------------------------------------------
- * 0 0x80000000 0x00000000 1 512MB 1 0 1
- * 1 0xA0000000 0x00000000 1 512MB 0 0 0
- *
- * But we reprogram them here because we want complete control over
- * our address space and the initial mappings may not map PAGE_OFFSET
- * to __MEMORY_START (or even map all of our RAM).
- *
- * Once we've setup cached and uncached mappings we clear the rest of the
- * PMB entries. This clearing also deals with the fact that PMB entries
- * can persist across reboots. The PMB could have been left in any state
- * when the reboot occurred, so to be safe we clear all entries and start
- * with with a clean slate.
- *
- * The uncached mapping is constructed using the smallest possible
- * mapping with a single unbufferable page. Only the kernel text needs to
- * be covered via the uncached mapping so that certain functions can be
- * run uncached.
- *
- * Drivers and the like that have previously abused the 1:1 identity
- * mapping are unsupported in 32-bit mode and must specify their caching
- * preference when page tables are constructed.
- *
- * This frees up the P2 space for more nefarious purposes.
- *
- * Register utilization is as follows:
- *
- * r0 = PMB_DATA data field
- * r1 = PMB_DATA address field
- * r2 = PMB_ADDR data field
- * r3 = PMB_ADDR address field
- * r4 = PMB_E_SHIFT
- * r5 = remaining amount of RAM to map
- * r6 = PMB mapping size we're trying to use
- * r7 = cached_to_uncached
- * r8 = scratch register
- * r9 = scratch register
- * r10 = number of PMB entries we've setup
- * r11 = scratch register
- */
-
- mov.l .LMMUCR, r1 /* Flush the TLB */
- mov.l @r1, r0
- or #MMUCR_TI, r0
- mov.l r0, @r1
-
- mov.l .LMEMORY_SIZE, r5
-
- mov #PMB_E_SHIFT, r0
- mov #0x1, r4
- shld r0, r4
-
- mov.l .LFIRST_DATA_ENTRY, r0
- mov.l .LPMB_DATA, r1
- mov.l .LFIRST_ADDR_ENTRY, r2
- mov.l .LPMB_ADDR, r3
-
- /*
- * First we need to walk the PMB and figure out if there are any
- * existing mappings that match the initial mappings VPN/PPN.
- * If these have already been established by the bootloader, we
- * don't bother setting up new entries here, and let the late PMB
- * initialization take care of things instead.
- *
- * Note that we may need to coalesce and merge entries in order
- * to reclaim more available PMB slots, which is much more than
- * we want to do at this early stage.
- */
- mov #0, r10
- mov #NR_PMB_ENTRIES, r9
-
- mov r1, r7 /* temporary PMB_DATA iter */
-
-.Lvalidate_existing_mappings:
-
- mov.l .LPMB_DATA_MASK, r11
- mov.l @r7, r8
- and r11, r8
- cmp/eq r0, r8 /* Check for valid __MEMORY_START mappings */
- bt .Lpmb_done
-
- add #1, r10 /* Increment the loop counter */
- cmp/eq r9, r10
- bf/s .Lvalidate_existing_mappings
- add r4, r7 /* Increment to the next PMB_DATA entry */
-
- /*
- * If we've fallen through, continue with setting up the initial
- * mappings.
- */
-
- mov r5, r7 /* cached_to_uncached */
- mov #0, r10
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Uncached mapping
- */
- mov #(PMB_SZ_16M >> 2), r9
- shll2 r9
-
- mov #(PMB_UB >> 8), r8
- shll8 r8
-
- or r0, r8
- or r9, r8
- mov.l r8, @r1
- mov r2, r8
- add r7, r8
- mov.l r8, @r3
-
- add r4, r1
- add r4, r3
- add #1, r10
-#endif
-
-/*
- * Iterate over all of the available sizes from largest to
- * smallest for constructing the cached mapping.
- */
-#define __PMB_ITER_BY_SIZE(size) \
-.L##size: \
- mov #(size >> 4), r6; \
- shll16 r6; \
- shll8 r6; \
- \
- cmp/hi r5, r6; \
- bt 9999f; \
- \
- mov #(PMB_SZ_##size##M >> 2), r9; \
- shll2 r9; \
- \
- /* \
- * Cached mapping \
- */ \
- mov #PMB_C, r8; \
- or r0, r8; \
- or r9, r8; \
- mov.l r8, @r1; \
- mov.l r2, @r3; \
- \
- /* Increment to the next PMB_DATA entry */ \
- add r4, r1; \
- /* Increment to the next PMB_ADDR entry */ \
- add r4, r3; \
- /* Increment number of PMB entries */ \
- add #1, r10; \
- \
- sub r6, r5; \
- add r6, r0; \
- add r6, r2; \
- \
- bra .L##size; \
-9999:
-
- __PMB_ITER_BY_SIZE(512)
- __PMB_ITER_BY_SIZE(128)
- __PMB_ITER_BY_SIZE(64)
- __PMB_ITER_BY_SIZE(16)
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Now that we can access it, update cached_to_uncached and
- * uncached_size.
- */
- mov.l .Lcached_to_uncached, r0
- mov.l r7, @r0
-
- mov.l .Luncached_size, r0
- mov #1, r7
- shll16 r7
- shll8 r7
- mov.l r7, @r0
-#endif
-
- /*
- * Clear the remaining PMB entries.
- *
- * r3 = entry to begin clearing from
- * r10 = number of entries we've setup so far
- */
- mov #0, r1
- mov #NR_PMB_ENTRIES, r0
-
-.Lagain:
- mov.l r1, @r3 /* Clear PMB_ADDR entry */
- add #1, r10 /* Increment the loop counter */
- cmp/eq r0, r10
- bf/s .Lagain
- add r4, r3 /* Increment to the next PMB_ADDR entry */
-
- mov.l 6f, r0
- icbi @r0
-
-.Lpmb_done:
-#endif /* CONFIG_PMB */
-
-#ifndef CONFIG_SH_NO_BSS_INIT
- /*
- * Don't clear BSS if running on slow platforms such as an RTL simulation,
- * remote memory via SHdebug link, etc. For these the memory can be guaranteed
- * to be all zero on boot anyway.
- */
- ! Clear BSS area
-#ifdef CONFIG_SMP
- mov.l 3f, r0
- cmp/eq #0, r0 ! skip clear if set to zero
- bt 10f
-#endif
-
- mov.l 3f, r1
- add #4, r1
- mov.l 4f, r2
- mov #0, r0
-9: cmp/hs r2, r1
- bf/s 9b ! while (r1 < r2)
- mov.l r0,@-r2
-
-10:
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov.l 8f, r0 ! Make flat device tree available early.
- jsr @r0
- mov r12, r4
-#endif
-
- ! Additional CPU initialization
- mov.l 6f, r0
- jsr @r0
- nop
-
- SYNCO() ! Wait for pending instructions..
-
- ! Start kernel
- mov.l 5f, r0
- jmp @r0
- nop
-
- .balign 4
-#if defined(CONFIG_CPU_SH2)
-1: .long 0x000000F0 ! IMASK=0xF
-#else
-1: .long 0x500080F0 ! MD=1, RB=0, BL=1, FD=1, IMASK=0xF
-#endif
-ENTRY(stack_start)
-2: .long init_thread_union+THREAD_SIZE
-3: .long __bss_start
-4: .long _end
-5: .long start_kernel
-6: .long cpu_init
-7: .long init_thread_union
-#if defined(CONFIG_OF_FLATTREE)
-8: .long sh_fdt_init
-#endif
-
-#ifdef CONFIG_PMB
-.LPMB_ADDR: .long PMB_ADDR
-.LPMB_DATA: .long PMB_DATA
-.LPMB_DATA_MASK: .long PMB_PFN_MASK | PMB_V
-.LFIRST_ADDR_ENTRY: .long PAGE_OFFSET | PMB_V
-.LFIRST_DATA_ENTRY: .long __MEMORY_START | PMB_V
-.LMMUCR: .long MMUCR
-.LMEMORY_SIZE: .long __MEMORY_SIZE
-#ifdef CONFIG_UNCACHED_MAPPING
-.Lcached_to_uncached: .long cached_to_uncached
-.Luncached_size: .long uncached_size
-#endif
-#endif
diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
deleted file mode 100644
index f10d64311127ba..00000000000000
--- a/arch/sh/kernel/hw_breakpoint.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/hw_breakpoint.c
- *
- * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/perf_event.h>
-#include <linux/sched/signal.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/percpu.h>
-#include <linux/kallsyms.h>
-#include <linux/notifier.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <asm/hw_breakpoint.h>
-#include <asm/mmu_context.h>
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-
-/*
- * Stores the breakpoints currently in use on each breakpoint address
- * register for each cpus
- */
-static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
-
-/*
- * A dummy placeholder for early accesses until the CPUs get a chance to
- * register their UBCs later in the boot process.
- */
-static struct sh_ubc ubc_dummy = { .num_events = 0 };
-
-static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
-
-/*
- * Install a perf counter breakpoint.
- *
- * We seek a free UBC channel and use it for this breakpoint.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-int arch_install_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (!*slot) {
- *slot = bp;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return -EBUSY;
-
- clk_enable(sh_ubc->clk);
- sh_ubc->enable(info, i);
-
- return 0;
-}
-
-/*
- * Uninstall the breakpoint contained in the given counter.
- *
- * First we search the debug address register it uses and then we disable
- * it.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-void arch_uninstall_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (*slot == bp) {
- *slot = NULL;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return;
-
- sh_ubc->disable(info, i);
- clk_disable(sh_ubc->clk);
-}
-
-static int get_hbp_len(u16 hbp_len)
-{
- unsigned int len_in_bytes = 0;
-
- switch (hbp_len) {
- case SH_BREAKPOINT_LEN_1:
- len_in_bytes = 1;
- break;
- case SH_BREAKPOINT_LEN_2:
- len_in_bytes = 2;
- break;
- case SH_BREAKPOINT_LEN_4:
- len_in_bytes = 4;
- break;
- case SH_BREAKPOINT_LEN_8:
- len_in_bytes = 8;
- break;
- }
- return len_in_bytes;
-}
-
-/*
- * Check for virtual address in kernel space.
- */
-int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
-{
- unsigned int len;
- unsigned long va;
-
- va = hw->address;
- len = get_hbp_len(hw->len);
-
- return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
-}
-
-int arch_bp_generic_fields(int sh_len, int sh_type,
- int *gen_len, int *gen_type)
-{
- /* Len */
- switch (sh_len) {
- case SH_BREAKPOINT_LEN_1:
- *gen_len = HW_BREAKPOINT_LEN_1;
- break;
- case SH_BREAKPOINT_LEN_2:
- *gen_len = HW_BREAKPOINT_LEN_2;
- break;
- case SH_BREAKPOINT_LEN_4:
- *gen_len = HW_BREAKPOINT_LEN_4;
- break;
- case SH_BREAKPOINT_LEN_8:
- *gen_len = HW_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (sh_type) {
- case SH_BREAKPOINT_READ:
- *gen_type = HW_BREAKPOINT_R;
- break;
- case SH_BREAKPOINT_WRITE:
- *gen_type = HW_BREAKPOINT_W;
- break;
- case SH_BREAKPOINT_RW:
- *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int arch_build_bp_info(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- hw->address = attr->bp_addr;
-
- /* Len */
- switch (attr->bp_len) {
- case HW_BREAKPOINT_LEN_1:
- hw->len = SH_BREAKPOINT_LEN_1;
- break;
- case HW_BREAKPOINT_LEN_2:
- hw->len = SH_BREAKPOINT_LEN_2;
- break;
- case HW_BREAKPOINT_LEN_4:
- hw->len = SH_BREAKPOINT_LEN_4;
- break;
- case HW_BREAKPOINT_LEN_8:
- hw->len = SH_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (attr->bp_type) {
- case HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_READ;
- break;
- case HW_BREAKPOINT_W:
- hw->type = SH_BREAKPOINT_WRITE;
- break;
- case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_RW;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Validate the arch-specific HW Breakpoint register settings
- */
-int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- unsigned int align;
- int ret;
-
- ret = arch_build_bp_info(bp, attr, hw);
- if (ret)
- return ret;
-
- ret = -EINVAL;
-
- switch (hw->len) {
- case SH_BREAKPOINT_LEN_1:
- align = 0;
- break;
- case SH_BREAKPOINT_LEN_2:
- align = 1;
- break;
- case SH_BREAKPOINT_LEN_4:
- align = 3;
- break;
- case SH_BREAKPOINT_LEN_8:
- align = 7;
- break;
- default:
- return ret;
- }
-
- /*
- * Check that the low-order bits of the address are appropriate
- * for the alignment implied by len.
- */
- if (hw->address & align)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Release the user breakpoints used by ptrace
- */
-void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
-{
- int i;
- struct thread_struct *t = &tsk->thread;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- unregister_hw_breakpoint(t->ptrace_bps[i]);
- t->ptrace_bps[i] = NULL;
- }
-}
-
-static int __kprobes hw_breakpoint_handler(struct die_args *args)
-{
- int cpu, i, rc = NOTIFY_STOP;
- struct perf_event *bp;
- unsigned int cmf, resume_mask;
-
- /*
- * Do an early return if none of the channels triggered.
- */
- cmf = sh_ubc->triggered_mask();
- if (unlikely(!cmf))
- return NOTIFY_DONE;
-
- /*
- * By default, resume all of the active channels.
- */
- resume_mask = sh_ubc->active_mask();
-
- /*
- * Disable breakpoints during exception handling.
- */
- sh_ubc->disable_all();
-
- cpu = get_cpu();
- for (i = 0; i < sh_ubc->num_events; i++) {
- unsigned long event_mask = (1 << i);
-
- if (likely(!(cmf & event_mask)))
- continue;
-
- /*
- * The counter may be concurrently released but that can only
- * occur from a call_rcu() path. We can then safely fetch
- * the breakpoint, use its callback, touch its counter
- * while we are in an rcu_read_lock() path.
- */
- rcu_read_lock();
-
- bp = per_cpu(bp_per_reg[i], cpu);
- if (bp)
- rc = NOTIFY_DONE;
-
- /*
- * Reset the condition match flag to denote completion of
- * exception handling.
- */
- sh_ubc->clear_triggered_mask(event_mask);
-
- /*
- * bp can be NULL due to concurrent perf counter
- * removing.
- */
- if (!bp) {
- rcu_read_unlock();
- break;
- }
-
- /*
- * Don't restore the channel if the breakpoint is from
- * ptrace, as it always operates in one-shot mode.
- */
- if (bp->overflow_handler == ptrace_triggered)
- resume_mask &= ~(1 << i);
-
- perf_bp_event(bp, args->regs);
-
- /* Deliver the signal to userspace */
- if (!arch_check_bp_in_kernelspace(&bp->hw.info)) {
- force_sig_fault(SIGTRAP, TRAP_HWBKPT,
- (void __user *)NULL);
- }
-
- rcu_read_unlock();
- }
-
- if (cmf == 0)
- rc = NOTIFY_DONE;
-
- sh_ubc->enable_all(resume_mask);
-
- put_cpu();
-
- return rc;
-}
-
-BUILD_TRAP_HANDLER(breakpoint)
-{
- unsigned long ex = lookup_exception_vector();
- TRAP_HANDLER_DECL;
-
- notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
-}
-
-/*
- * Handle debug exception notifications.
- */
-int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (val != DIE_BREAKPOINT)
- return NOTIFY_DONE;
-
- /*
- * If the breakpoint hasn't been triggered by the UBC, it's
- * probably from a debugger, so don't do anything more here.
- *
- * This also permits the UBC interface clock to remain off for
- * non-UBC breakpoints, as we don't need to check the triggered
- * or active channel masks.
- */
- if (args->trapnr != sh_ubc->trap_nr)
- return NOTIFY_DONE;
-
- return hw_breakpoint_handler(data);
-}
-
-void hw_breakpoint_pmu_read(struct perf_event *bp)
-{
- /* TODO */
-}
-
-int register_sh_ubc(struct sh_ubc *ubc)
-{
- /* Bail if it's already assigned */
- if (sh_ubc != &ubc_dummy)
- return -EBUSY;
- sh_ubc = ubc;
-
- pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
-
- WARN_ON(ubc->num_events > HBP_NUM);
-
- return 0;
-}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
deleted file mode 100644
index f59814983bd59f..00000000000000
--- a/arch/sh/kernel/idle.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * The idle loop for all SuperH platforms.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/preempt.h>
-#include <linux/thread_info.h>
-#include <linux/irqflags.h>
-#include <linux/smp.h>
-#include <linux/atomic.h>
-#include <asm/smp.h>
-#include <asm/bl_bit.h>
-
-static void (*sh_idle)(void);
-
-void default_idle(void)
-{
- set_bl_bit();
- raw_local_irq_enable();
- /* Isn't this racy ? */
- cpu_sleep();
- clear_bl_bit();
-}
-
-void arch_cpu_idle_dead(void)
-{
- play_dead();
-}
-
-void arch_cpu_idle(void)
-{
- sh_idle();
-}
-
-void __init select_idle_routine(void)
-{
- /*
- * If a platform has set its own idle routine, leave it alone.
- */
- if (!sh_idle)
- sh_idle = default_idle;
-}
-
-void stop_this_cpu(void *unused)
-{
- local_irq_disable();
- set_cpu_online(smp_processor_id(), false);
-
- for (;;)
- cpu_sleep();
-}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
deleted file mode 100644
index da22f3b32d305e..00000000000000
--- a/arch/sh/kernel/io.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/io.c - Machine independent I/O functions.
- *
- * Copyright (C) 2000 - 2009 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/*
- * Copy data from IO memory space to "real" memory space.
- */
-void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
-{
- /*
- * Would it be worthwhile doing byte and long transfers first
- * to try and get aligned?
- */
-#ifdef CONFIG_CPU_SH4
- if ((count >= 0x20) &&
- (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l @%7+, %2 \n\t"
- "movca.l r0, @%0 \n\t"
- "mov.l @%7+, %3 \n\t"
- "mov.l @%7+, %4 \n\t"
- "mov.l @%7+, %5 \n\t"
- "mov.l @%7+, %6 \n\t"
- "mov.l @%7+, r7 \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > count \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (to), "=&r" (count),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
- : "7"(from), "0" (to), "1" (count)
- : "r0", "r7", "t", "memory");
- }
-#endif
-
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for (; count > 3; count -= 4) {
- *(u32 *)to = *(volatile u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(u8 *)to = *(volatile u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_fromio);
-
-/*
- * Copy data from "real" memory space to IO memory space.
- */
-void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
-{
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for ( ; count > 3; count -= 4) {
- *(volatile u32 *)to = *(u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(volatile u8 *)to = *(u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_toio);
-
-/*
- * "memset" on IO memory space.
- * This needs to be optimized.
- */
-void memset_io(volatile void __iomem *dst, int c, unsigned long count)
-{
- while (count) {
- count--;
- writeb(c, dst);
- dst++;
- }
-}
-EXPORT_SYMBOL(memset_io);
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
deleted file mode 100644
index e803b14ef12eac..00000000000000
--- a/arch/sh/kernel/io_trapped.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Trapped io support
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Intercept io operations by trapping.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bitops.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-#define TRAPPED_PAGES_MAX 16
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-LIST_HEAD(trapped_io);
-EXPORT_SYMBOL_GPL(trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
-LIST_HEAD(trapped_mem);
-EXPORT_SYMBOL_GPL(trapped_mem);
-#endif
-static DEFINE_SPINLOCK(trapped_lock);
-
-static int trapped_io_disable __read_mostly;
-
-static int __init trapped_io_setup(char *__unused)
-{
- trapped_io_disable = 1;
- return 1;
-}
-__setup("noiotrap", trapped_io_setup);
-
-int register_trapped_io(struct trapped_io *tiop)
-{
- struct resource *res;
- unsigned long len = 0, flags = 0;
- struct page *pages[TRAPPED_PAGES_MAX];
- int k, n;
-
- if (unlikely(trapped_io_disable))
- return 0;
-
- /* structure must be page aligned */
- if ((unsigned long)tiop & (PAGE_SIZE - 1))
- goto bad;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len += roundup(resource_size(res), PAGE_SIZE);
- flags |= res->flags;
- }
-
- /* support IORESOURCE_IO _or_ MEM, not both */
- if (hweight_long(flags) != 1)
- goto bad;
-
- n = len >> PAGE_SHIFT;
-
- if (n >= TRAPPED_PAGES_MAX)
- goto bad;
-
- for (k = 0; k < n; k++)
- pages[k] = virt_to_page(tiop);
-
- tiop->virt_base = vmap(pages, n, VM_MAP, PAGE_NONE);
- if (!tiop->virt_base)
- goto bad;
-
- len = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- pr_info("trapped io 0x%08lx overrides %s 0x%08lx\n",
- (unsigned long)(tiop->virt_base + len),
- res->flags & IORESOURCE_IO ? "io" : "mmio",
- (unsigned long)res->start);
- len += roundup(resource_size(res), PAGE_SIZE);
- }
-
- tiop->magic = IO_TRAPPED_MAGIC;
- INIT_LIST_HEAD(&tiop->list);
- spin_lock_irq(&trapped_lock);
-#ifdef CONFIG_HAS_IOPORT_MAP
- if (flags & IORESOURCE_IO)
- list_add(&tiop->list, &trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
- if (flags & IORESOURCE_MEM)
- list_add(&tiop->list, &trapped_mem);
-#endif
- spin_unlock_irq(&trapped_lock);
-
- return 0;
- bad:
- pr_warn("unable to install trapped io filter\n");
- return -1;
-}
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size)
-{
- unsigned long voffs;
- struct trapped_io *tiop;
- struct resource *res;
- int k, len;
- unsigned long flags;
-
- spin_lock_irqsave(&trapped_lock, flags);
- list_for_each_entry(tiop, list, list) {
- voffs = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- if (res->start == offset) {
- spin_unlock_irqrestore(&trapped_lock, flags);
- return tiop->virt_base + voffs;
- }
-
- len = resource_size(res);
- voffs += roundup(len, PAGE_SIZE);
- }
- }
- spin_unlock_irqrestore(&trapped_lock, flags);
- return NULL;
-}
-
-static struct trapped_io *lookup_tiop(unsigned long address)
-{
- pgd_t *pgd_k;
- p4d_t *p4d_k;
- pud_t *pud_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
- pte_t entry;
-
- pgd_k = swapper_pg_dir + pgd_index(address);
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- entry = *pte_k;
-
- return pfn_to_kaddr(pte_pfn(entry));
-}
-
-static unsigned long lookup_address(struct trapped_io *tiop,
- unsigned long address)
-{
- struct resource *res;
- unsigned long vaddr = (unsigned long)tiop->virt_base;
- unsigned long len;
- int k;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len = roundup(resource_size(res), PAGE_SIZE);
- if (address < (vaddr + len))
- return res->start + (address - vaddr);
- vaddr += len;
- }
- return 0;
-}
-
-static unsigned long long copy_word(unsigned long src_addr, int src_len,
- unsigned long dst_addr, int dst_len)
-{
- unsigned long long tmp = 0;
-
- switch (src_len) {
- case 1:
- tmp = __raw_readb(src_addr);
- break;
- case 2:
- tmp = __raw_readw(src_addr);
- break;
- case 4:
- tmp = __raw_readl(src_addr);
- break;
- case 8:
- tmp = __raw_readq(src_addr);
- break;
- }
-
- switch (dst_len) {
- case 1:
- __raw_writeb(tmp, dst_addr);
- break;
- case 2:
- __raw_writew(tmp, dst_addr);
- break;
- case 4:
- __raw_writel(tmp, dst_addr);
- break;
- case 8:
- __raw_writeq(tmp, dst_addr);
- break;
- }
-
- return tmp;
-}
-
-static unsigned long from_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long src_addr = (unsigned long)src;
- unsigned long long tmp;
-
- pr_debug("trapped io read 0x%08lx (%ld)\n", src_addr, cnt);
- tiop = lookup_tiop(src_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- src_addr = lookup_address(tiop, src_addr);
- if (!src_addr)
- return cnt;
-
- tmp = copy_word(src_addr,
- max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)),
- (unsigned long)dst, cnt);
-
- pr_debug("trapped io read 0x%08lx -> 0x%08llx\n", src_addr, tmp);
- return 0;
-}
-
-static unsigned long to_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long dst_addr = (unsigned long)dst;
- unsigned long long tmp;
-
- pr_debug("trapped io write 0x%08lx (%ld)\n", dst_addr, cnt);
- tiop = lookup_tiop(dst_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- dst_addr = lookup_address(tiop, dst_addr);
- if (!dst_addr)
- return cnt;
-
- tmp = copy_word((unsigned long)src, cnt,
- dst_addr, max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)));
-
- pr_debug("trapped io write 0x%08lx -> 0x%08llx\n", dst_addr, tmp);
- return 0;
-}
-
-static struct mem_access trapped_io_access = {
- from_device,
- to_device,
-};
-
-int handle_trapped_io(struct pt_regs *regs, unsigned long address)
-{
- insn_size_t instruction;
- int tmp;
-
- if (trapped_io_disable)
- return 0;
- if (!lookup_tiop(address))
- return 0;
-
- WARN_ON(user_mode(regs));
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- return 0;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &trapped_io_access, 1, address);
- return tmp == 0;
-}
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
deleted file mode 100644
index 0a0dff4e66dea4..00000000000000
--- a/arch/sh/kernel/iomap.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/iomap.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-unsigned int ioread8(const void __iomem *addr)
-{
- return readb(addr);
-}
-EXPORT_SYMBOL(ioread8);
-
-unsigned int ioread16(const void __iomem *addr)
-{
- return readw(addr);
-}
-EXPORT_SYMBOL(ioread16);
-
-unsigned int ioread16be(const void __iomem *addr)
-{
- return be16_to_cpu(__raw_readw(addr));
-}
-EXPORT_SYMBOL(ioread16be);
-
-unsigned int ioread32(const void __iomem *addr)
-{
- return readl(addr);
-}
-EXPORT_SYMBOL(ioread32);
-
-unsigned int ioread32be(const void __iomem *addr)
-{
- return be32_to_cpu(__raw_readl(addr));
-}
-EXPORT_SYMBOL(ioread32be);
-
-void iowrite8(u8 val, void __iomem *addr)
-{
- writeb(val, addr);
-}
-EXPORT_SYMBOL(iowrite8);
-
-void iowrite16(u16 val, void __iomem *addr)
-{
- writew(val, addr);
-}
-EXPORT_SYMBOL(iowrite16);
-
-void iowrite16be(u16 val, void __iomem *addr)
-{
- __raw_writew(cpu_to_be16(val), addr);
-}
-EXPORT_SYMBOL(iowrite16be);
-
-void iowrite32(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-EXPORT_SYMBOL(iowrite32);
-
-void iowrite32be(u32 val, void __iomem *addr)
-{
- __raw_writel(cpu_to_be32(val), addr);
-}
-EXPORT_SYMBOL(iowrite32be);
-
-/*
- * These are the "repeat MMIO read/write" functions.
- * Note the "__raw" accesses, since we don't want to
- * convert to CPU byte order. We write in "IO byte
- * order" (we also don't have IO barriers).
- */
-static inline void mmio_insb(const void __iomem *addr, u8 *dst, int count)
-{
- while (--count >= 0) {
- u8 data = __raw_readb(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insw(const void __iomem *addr, u16 *dst, int count)
-{
- while (--count >= 0) {
- u16 data = __raw_readw(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insl(const void __iomem *addr, u32 *dst, int count)
-{
- while (--count >= 0) {
- u32 data = __raw_readl(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
-{
- while (--count >= 0) {
- __raw_writeb(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
-{
- while (--count >= 0) {
- __raw_writew(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
-{
- while (--count >= 0) {
- __raw_writel(*src, addr);
- src++;
- }
-}
-
-void ioread8_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insb(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread8_rep);
-
-void ioread16_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insw(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread16_rep);
-
-void ioread32_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insl(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread32_rep);
-
-void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsb(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite8_rep);
-
-void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsw(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite16_rep);
-
-void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsl(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite32_rep);
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
deleted file mode 100644
index f39446a658bdb8..00000000000000
--- a/arch/sh/kernel/ioport.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/ioport.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-
-unsigned long sh_io_port_base __read_mostly = -1;
-EXPORT_SYMBOL(sh_io_port_base);
-
-void __iomem *__ioport_map(unsigned long addr, unsigned int size)
-{
- if (sh_mv.mv_ioport_map)
- return sh_mv.mv_ioport_map(addr, size);
-
- return (void __iomem *)(addr + sh_io_port_base);
-}
-EXPORT_SYMBOL(__ioport_map);
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- void __iomem *ret;
-
- ret = __ioport_map_trapped(port, nr);
- if (ret)
- return ret;
-
- return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
- if (sh_mv.mv_ioport_unmap)
- sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
deleted file mode 100644
index 4e6835de54cf8e..00000000000000
--- a/arch/sh/kernel/irq.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/irq.c
- *
- * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
- *
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/ftrace.h>
-#include <linux/delay.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/machvec.h>
-#include <linux/uaccess.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/softirq_stack.h>
-
-atomic_t irq_err_count;
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
- atomic_inc(&irq_err_count);
- printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
-#if defined(CONFIG_PROC_FS)
-/*
- * /proc/interrupts printing for arch specific interrupts
- */
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
- int j;
-
- seq_printf(p, "%*s: ", prec, "NMI");
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", per_cpu(irq_stat.__nmi_count, j));
- seq_printf(p, " Non-maskable interrupts\n");
-
- seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * per-CPU IRQ handling contexts (thread information and stack)
- */
-union irq_ctx {
- struct thread_info tinfo;
- u32 stack[THREAD_SIZE/sizeof(u32)];
-};
-
-static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
-static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-
-static inline void handle_one_irq(unsigned int irq)
-{
- union irq_ctx *curctx, *irqctx;
-
- curctx = (union irq_ctx *)current_thread_info();
- irqctx = hardirq_ctx[smp_processor_id()];
-
- /*
- * this is where we switch to the IRQ stack. However, if we are
- * already using the IRQ stack (because we interrupted a hardirq
- * handler) we can't do that and just have to keep using the
- * current stack (which is the irq stack already after all)
- */
- if (curctx != irqctx) {
- u32 *isp;
-
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
- irqctx->tinfo.task = curctx->tinfo.task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /*
- * Copy the softirq bits in preempt_count so that the
- * softirq checks work in the hardirq context.
- */
- irqctx->tinfo.preempt_count =
- (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
- (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
- __asm__ __volatile__ (
- "mov %0, r4 \n"
- "mov r15, r8 \n"
- "jsr @%1 \n"
- /* switch to the irq stack */
- " mov %2, r15 \n"
- /* restore the stack (ring zero) */
- "mov r8, r15 \n"
- : /* no outputs */
- : "r" (irq), "r" (generic_handle_irq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "t", "pr"
- );
- } else
- generic_handle_irq(irq);
-}
-
-/*
- * allocate per-cpu stacks for hardirq and for softirq processing
- */
-void irq_ctx_init(int cpu)
-{
- union irq_ctx *irqctx;
-
- if (hardirq_ctx[cpu])
- return;
-
- irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- hardirq_ctx[cpu] = irqctx;
-
- irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = 0;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- softirq_ctx[cpu] = irqctx;
-
- printk("CPU %u irqstacks, hard=%p soft=%p\n",
- cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
-}
-
-void irq_ctx_exit(int cpu)
-{
- hardirq_ctx[cpu] = NULL;
-}
-
-#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
-void do_softirq_own_stack(void)
-{
- struct thread_info *curctx;
- union irq_ctx *irqctx;
- u32 *isp;
-
- curctx = current_thread_info();
- irqctx = softirq_ctx[smp_processor_id()];
- irqctx->tinfo.task = curctx->task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /* build the stack frame on the softirq stack */
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
-
- __asm__ __volatile__ (
- "mov r15, r9 \n"
- "jsr @%0 \n"
- /* switch to the softirq stack */
- " mov %1, r15 \n"
- /* restore the thread stack */
- "mov r9, r15 \n"
- : /* no outputs */
- : "r" (__do_softirq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
- );
-}
-#endif
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
- generic_handle_irq(irq);
-}
-#endif
-
-asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- irq_enter();
-
- irq = irq_demux(irq_lookup(irq));
-
- if (irq != NO_IRQ_IGNORE) {
- handle_one_irq(irq);
- irq_finish(irq);
- }
-
- irq_exit();
-
- set_irq_regs(old_regs);
-
- return IRQ_HANDLED;
-}
-
-void __init init_IRQ(void)
-{
- plat_irq_setup();
-
- /* Perform the machine specific initialisation */
- if (sh_mv.mv_init_irq)
- sh_mv.mv_init_irq();
-
- intc_finalize();
-
- irq_ctx_init(smp_processor_id());
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The CPU has been marked offline. Migrate IRQs off this CPU. If
- * the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- */
-void migrate_irqs(void)
-{
- unsigned int irq, cpu = smp_processor_id();
-
- for_each_active_irq(irq) {
- struct irq_data *data = irq_get_irq_data(irq);
-
- if (irq_data_get_node(data) == cpu) {
- const struct cpumask *mask = irq_data_get_affinity_mask(data);
- unsigned int newcpu = cpumask_any_and(mask,
- cpu_online_mask);
- if (newcpu >= nr_cpu_ids) {
- pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
- irq, cpu);
-
- irq_set_affinity(irq, cpu_all_mask);
- } else {
- irq_set_affinity(irq, mask);
- }
- }
- }
-}
-#endif
diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c
deleted file mode 100644
index e09cdc4ada68c8..00000000000000
--- a/arch/sh/kernel/irq_32.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SHcompact irqflags support
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- */
-#include <linux/irqflags.h>
-#include <linux/module.h>
-
-void notrace arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __dummy0, __dummy1;
-
- if (flags == ARCH_IRQ_DISABLED) {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or #0xf0, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&z" (__dummy0)
- : /* no inputs */
- : "memory"
- );
- } else {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
- "stc r6_bank, %1\n\t"
- "or %1, %0\n\t"
-#endif
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~ARCH_IRQ_DISABLED)
- : "memory"
- );
- }
-}
-EXPORT_SYMBOL(arch_local_irq_restore);
-
-unsigned long notrace arch_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- : "=&z" (flags)
- : /* no inputs */
- : "memory"
- );
-
- return flags;
-}
-EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/arch/sh/kernel/kdebugfs.c b/arch/sh/kernel/kdebugfs.c
deleted file mode 100644
index 8b505e1556a5f8..00000000000000
--- a/arch/sh/kernel/kdebugfs.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-
-struct dentry *arch_debugfs_dir;
-EXPORT_SYMBOL(arch_debugfs_dir);
-
-static int __init arch_kdebugfs_init(void)
-{
- arch_debugfs_dir = debugfs_create_dir("sh", NULL);
- return 0;
-}
-arch_initcall(arch_kdebugfs_init);
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
deleted file mode 100644
index e4147efa9ec6da..00000000000000
--- a/arch/sh/kernel/kgdb.c
+++ /dev/null
@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH KGDB support
- *
- * Copyright (C) 2008 - 2012 Paul Mundt
- *
- * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
- */
-#include <linux/kgdb.h>
-#include <linux/kdebug.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/* Macros for single step instruction identification */
-#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
-#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
-#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
- (((op) & 0x7f ) << 1))
-#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
-#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
-#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
-#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
-#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
-#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
-#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
-#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
-#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
-#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_RTS(op) ((op) == 0xb)
-#define OPCODE_RTE(op) ((op) == 0x2b)
-
-#define SR_T_BIT_MASK 0x1
-#define STEP_OPCODE 0xc33d
-
-/* Calculate the new address for after a step */
-static short *get_step_address(struct pt_regs *linux_regs)
-{
- insn_size_t op = __raw_readw(linux_regs->pc);
- long addr;
-
- /* BT */
- if (OPCODE_BT(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BTS */
- else if (OPCODE_BTS(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BF */
- else if (OPCODE_BF(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BFS */
- else if (OPCODE_BFS(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BRA */
- else if (OPCODE_BRA(op))
- addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
-
- /* BRAF */
- else if (OPCODE_BRAF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BRAF_REG(op)];
-
- /* BSR */
- else if (OPCODE_BSR(op))
- addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
-
- /* BSRF */
- else if (OPCODE_BSRF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BSRF_REG(op)];
-
- /* JMP */
- else if (OPCODE_JMP(op))
- addr = linux_regs->regs[OPCODE_JMP_REG(op)];
-
- /* JSR */
- else if (OPCODE_JSR(op))
- addr = linux_regs->regs[OPCODE_JSR_REG(op)];
-
- /* RTS */
- else if (OPCODE_RTS(op))
- addr = linux_regs->pr;
-
- /* RTE */
- else if (OPCODE_RTE(op))
- addr = linux_regs->regs[15];
-
- /* Other */
- else
- addr = linux_regs->pc + instruction_size(op);
-
- flush_icache_range(addr, addr + instruction_size(op));
- return (short *)addr;
-}
-
-/*
- * Replace the instruction immediately after the current instruction
- * (i.e. next in the expected flow of control) with a trap instruction,
- * so that returning will cause only a single instruction to be executed.
- * Note that this model is slightly broken for instructions with delay
- * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
- * instruction in the delay slot will be executed.
- */
-
-static unsigned long stepped_address;
-static insn_size_t stepped_opcode;
-
-static void do_single_step(struct pt_regs *linux_regs)
-{
- /* Determine where the target instruction will send us to */
- unsigned short *addr = get_step_address(linux_regs);
-
- stepped_address = (int)addr;
-
- /* Replace it */
- stepped_opcode = __raw_readw((long)addr);
- *addr = STEP_OPCODE;
-
- /* Flush and return */
- flush_icache_range((long)addr, (long)addr +
- instruction_size(stepped_opcode));
-}
-
-/* Undo a single step */
-static void undo_single_step(struct pt_regs *linux_regs)
-{
- /* If we have stepped, put back the old instruction */
- /* Use stepped_address in case we stopped elsewhere */
- if (stepped_opcode != 0) {
- __raw_writew(stepped_opcode, stepped_address);
- flush_icache_range(stepped_address, stepped_address + 2);
- }
-
- stepped_opcode = 0;
-}
-
-struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
- { "r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
- { "r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
- { "r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
- { "r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
- { "r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
- { "r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
- { "r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
- { "r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
- { "r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
- { "r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
- { "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
- { "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
- { "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
- { "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
- { "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
- { "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
- { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc) },
- { "pr", GDB_SIZEOF_REG, offsetof(struct pt_regs, pr) },
- { "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, sr) },
- { "gbr", GDB_SIZEOF_REG, offsetof(struct pt_regs, gbr) },
- { "mach", GDB_SIZEOF_REG, offsetof(struct pt_regs, mach) },
- { "macl", GDB_SIZEOF_REG, offsetof(struct pt_regs, macl) },
- { "vbr", GDB_SIZEOF_REG, -1 },
-};
-
-int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno < 0 || regno >= DBG_MAX_REG_NUM)
- return -EINVAL;
-
- if (dbg_reg_def[regno].offset != -1)
- memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
- dbg_reg_def[regno].size);
-
- return 0;
-}
-
-char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno >= DBG_MAX_REG_NUM || regno < 0)
- return NULL;
-
- if (dbg_reg_def[regno].size != -1)
- memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
- dbg_reg_def[regno].size);
-
- switch (regno) {
- case GDB_VBR:
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (mem));
- break;
- }
-
- return dbg_reg_def[regno].name;
-}
-
-void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
-{
- struct pt_regs *thread_regs = task_pt_regs(p);
- int reg;
-
- /* Initialize to zero */
- for (reg = 0; reg < DBG_MAX_REG_NUM; reg++)
- gdb_regs[reg] = 0;
-
- /*
- * Copy out GP regs 8 to 14.
- *
- * switch_to() relies on SR.RB toggling, so regs 0->7 are banked
- * and need privileged instructions to get to. The r15 value we
- * fetch from the thread info directly.
- */
- for (reg = GDB_R8; reg < GDB_R15; reg++)
- gdb_regs[reg] = thread_regs->regs[reg];
-
- gdb_regs[GDB_R15] = p->thread.sp;
- gdb_regs[GDB_PC] = p->thread.pc;
-
- /*
- * Additional registers we have context for
- */
- gdb_regs[GDB_PR] = thread_regs->pr;
- gdb_regs[GDB_GBR] = thread_regs->gbr;
-}
-
-int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
- char *remcomInBuffer, char *remcomOutBuffer,
- struct pt_regs *linux_regs)
-{
- unsigned long addr;
- char *ptr;
-
- /* Undo any stepping we may have done */
- undo_single_step(linux_regs);
-
- switch (remcomInBuffer[0]) {
- case 'c':
- case 's':
- /* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
- if (kgdb_hex2long(&ptr, &addr))
- linux_regs->pc = addr;
- fallthrough;
- case 'D':
- case 'k':
- atomic_set(&kgdb_cpu_doing_single_step, -1);
-
- if (remcomInBuffer[0] == 's') {
- do_single_step(linux_regs);
- kgdb_single_step = 1;
-
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
- }
-
- return 0;
- }
-
- /* this means that we do not want to exit from the handler: */
- return -1;
-}
-
-unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
-{
- if (exception == 60)
- return instruction_pointer(regs) - 2;
- return instruction_pointer(regs);
-}
-
-void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
-{
- regs->pc = ip;
-}
-
-/*
- * The primary entry points for the kgdb debug trap table entries.
- */
-BUILD_TRAP_HANDLER(singlestep)
-{
- unsigned long flags;
- TRAP_HANDLER_DECL;
-
- local_irq_save(flags);
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- kgdb_handle_exception(0, SIGTRAP, 0, regs);
- local_irq_restore(flags);
-}
-
-static int __kgdb_notify(struct die_args *args, unsigned long cmd)
-{
- int ret;
-
- switch (cmd) {
- case DIE_BREAKPOINT:
- /*
- * This means a user thread is single stepping
- * a system call which should be ignored
- */
- if (test_thread_flag(TIF_SINGLESTEP))
- return NOTIFY_DONE;
-
- ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
- args->err, args->regs);
- if (ret)
- return NOTIFY_DONE;
-
- break;
- }
-
- return NOTIFY_STOP;
-}
-
-static int
-kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
-{
- unsigned long flags;
- int ret;
-
- local_irq_save(flags);
- ret = __kgdb_notify(ptr, cmd);
- local_irq_restore(flags);
-
- return ret;
-}
-
-static struct notifier_block kgdb_notifier = {
- .notifier_call = kgdb_notify,
-
- /*
- * Lowest-prio notifier priority, we want to be notified last:
- */
- .priority = -INT_MAX,
-};
-
-int kgdb_arch_init(void)
-{
- return register_die_notifier(&kgdb_notifier);
-}
-
-void kgdb_arch_exit(void)
-{
- unregister_die_notifier(&kgdb_notifier);
-}
-
-const struct kgdb_arch arch_kgdb_ops = {
- /* Breakpoint instruction: trapa #0x3c */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- .gdb_bpt_instr = { 0x3c, 0xc3 },
-#else
- .gdb_bpt_instr = { 0xc3, 0x3c },
-#endif
-};
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
deleted file mode 100644
index aed1ea8e2c2f06..00000000000000
--- a/arch/sh/kernel/kprobes.c
+++ /dev/null
@@ -1,452 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Kernel probes (kprobes) for SuperH
- *
- * Copyright (C) 2007 Chris Smith <chris.smith@st.com>
- * Copyright (C) 2006 Lineo Solutions, Inc.
- */
-#include <linux/kprobes.h>
-#include <linux/extable.h>
-#include <linux/ptrace.h>
-#include <linux/preempt.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-static DEFINE_PER_CPU(struct kprobe, saved_current_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode2);
-
-#define OPCODE_JMP(x) (((x) & 0xF0FF) == 0x402b)
-#define OPCODE_JSR(x) (((x) & 0xF0FF) == 0x400b)
-#define OPCODE_BRA(x) (((x) & 0xF000) == 0xa000)
-#define OPCODE_BRAF(x) (((x) & 0xF0FF) == 0x0023)
-#define OPCODE_BSR(x) (((x) & 0xF000) == 0xb000)
-#define OPCODE_BSRF(x) (((x) & 0xF0FF) == 0x0003)
-
-#define OPCODE_BF_S(x) (((x) & 0xFF00) == 0x8f00)
-#define OPCODE_BT_S(x) (((x) & 0xFF00) == 0x8d00)
-
-#define OPCODE_BF(x) (((x) & 0xFF00) == 0x8b00)
-#define OPCODE_BT(x) (((x) & 0xFF00) == 0x8900)
-
-#define OPCODE_RTS(x) (((x) & 0x000F) == 0x000b)
-#define OPCODE_RTE(x) (((x) & 0xFFFF) == 0x002b)
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
- kprobe_opcode_t opcode = *(kprobe_opcode_t *) (p->addr);
-
- if (OPCODE_RTE(opcode))
- return -EFAULT; /* Bad breakpoint */
-
- p->opcode = opcode;
-
- return 0;
-}
-
-void __kprobes arch_copy_kprobe(struct kprobe *p)
-{
- memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- p->opcode = *p->addr;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
- *p->addr = BREAKPOINT_INSTRUCTION;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
- *p->addr = p->opcode;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
- if (*p->addr == BREAKPOINT_INSTRUCTION)
- return 1;
-
- return 0;
-}
-
-/**
- * If an illegal slot instruction exception occurs for an address
- * containing a kprobe, remove the probe.
- *
- * Returns 0 if the exception was handled successfully, 1 otherwise.
- */
-int __kprobes kprobe_handle_illslot(unsigned long pc)
-{
- struct kprobe *p = get_kprobe((kprobe_opcode_t *) pc + 1);
-
- if (p != NULL) {
- printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
- (unsigned int)pc + 2);
- unregister_kprobe(p);
- return 0;
- }
-
- return 1;
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
- struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
-
- if (saved->addr) {
- arch_disarm_kprobe(p);
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
-
- saved = this_cpu_ptr(&saved_next_opcode2);
- if (saved->addr) {
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
- }
- }
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- kcb->prev_kprobe.kp = kprobe_running();
- kcb->prev_kprobe.status = kcb->kprobe_status;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
- kcb->kprobe_status = kcb->prev_kprobe.status;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, p);
-}
-
-/*
- * Singlestep is implemented by disabling the current kprobe and setting one
- * on the next instruction, following branches. Two probes are set if the
- * branch is conditional.
- */
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
- __this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
-
- if (p != NULL) {
- struct kprobe *op1, *op2;
-
- arch_disarm_kprobe(p);
-
- op1 = this_cpu_ptr(&saved_next_opcode);
- op2 = this_cpu_ptr(&saved_next_opcode2);
-
- if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr = (kprobe_opcode_t *) regs->regs[reg_nr];
- } else if (OPCODE_BRA(p->opcode) || OPCODE_BSR(p->opcode)) {
- unsigned long disp = (p->opcode & 0x0FFF);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
-
- } else if (OPCODE_BRAF(p->opcode) || OPCODE_BSRF(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 +
- regs->regs[reg_nr]);
-
- } else if (OPCODE_RTS(p->opcode)) {
- op1->addr = (kprobe_opcode_t *) regs->pr;
-
- } else if (OPCODE_BF(p->opcode) || OPCODE_BT(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 1;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else if (OPCODE_BF_S(p->opcode) || OPCODE_BT_S(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 2;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else {
- op1->addr = p->addr + 1;
- }
-
- op1->opcode = *(op1->addr);
- arch_arm_kprobe(op1);
- }
-}
-
-/* Called with kretprobe_lock held */
-void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
- struct pt_regs *regs)
-{
- ri->ret_addr = (kprobe_opcode_t *) regs->pr;
- ri->fp = NULL;
-
- /* Replace the return addr with trampoline addr */
- regs->pr = (unsigned long)__kretprobe_trampoline;
-}
-
-static int __kprobes kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *p;
- int ret = 0;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb;
-
- /*
- * We don't want to be preempted for the entire
- * duration of kprobe processing
- */
- preempt_disable();
- kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (regs->pc);
-
- /* Check we're not actually recursing */
- if (kprobe_running()) {
- p = get_kprobe(addr);
- if (p) {
- if (kcb->kprobe_status == KPROBE_HIT_SS &&
- *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
- goto no_kprobe;
- }
- /* We have reentered the kprobe_handler(), since
- * another probe was hit while within the handler.
- * We here save the original kprobes variables and
- * just single step on the instruction of the new probe
- * without calling any user handlers.
- */
- save_previous_kprobe(kcb);
- set_current_kprobe(p, regs, kcb);
- kprobes_inc_nmissed_count(p);
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_REENTER;
- return 1;
- }
- goto no_kprobe;
- }
-
- p = get_kprobe(addr);
- if (!p) {
- /* Not one of ours: let kernel handle it */
- if (*(kprobe_opcode_t *)addr != BREAKPOINT_INSTRUCTION) {
- /*
- * The breakpoint instruction was removed right
- * after we hit it. Another cpu has removed
- * either a probepoint or a debugger breakpoint
- * at this address. In either case, no further
- * handling of this interrupt is appropriate.
- */
- ret = 1;
- }
-
- goto no_kprobe;
- }
-
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
- if (p->pre_handler && p->pre_handler(p, regs)) {
- /* handler has already set things up, so skip ss setup */
- reset_current_kprobe();
- preempt_enable_no_resched();
- return 1;
- }
-
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_HIT_SS;
- return 1;
-
-no_kprobe:
- preempt_enable_no_resched();
- return ret;
-}
-
-/*
- * For function-return probes, init_kprobes() establishes a probepoint
- * here. When a retprobed function returns, this probe is hit and
- * trampoline_probe_handler() runs, calling the kretprobe's handler.
- */
-static void __used kretprobe_trampoline_holder(void)
-{
- asm volatile (".globl __kretprobe_trampoline\n"
- "__kretprobe_trampoline:\n\t"
- "nop\n");
-}
-
-/*
- * Called when we hit the probe point at __kretprobe_trampoline
- */
-int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
-{
- regs->pc = __kretprobe_trampoline_handler(regs, NULL);
-
- return 1;
-}
-
-static int __kprobes post_kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kprobe_opcode_t *addr = NULL;
- struct kprobe *p = NULL;
-
- if (!cur)
- return 0;
-
- if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- cur->post_handler(cur, regs, 0);
- }
-
- p = this_cpu_ptr(&saved_next_opcode);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
-
- addr = __this_cpu_read(saved_current_opcode.addr);
- __this_cpu_write(saved_current_opcode.addr, NULL);
-
- p = get_kprobe(addr);
- arch_arm_kprobe(p);
-
- p = this_cpu_ptr(&saved_next_opcode2);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
- }
- }
-
- /* Restore back the original saved kprobes variables and continue. */
- if (kcb->kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe(kcb);
- goto out;
- }
-
- reset_current_kprobe();
-
-out:
- preempt_enable_no_resched();
-
- return 1;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- const struct exception_table_entry *entry;
-
- switch (kcb->kprobe_status) {
- case KPROBE_HIT_SS:
- case KPROBE_REENTER:
- /*
- * We are here because the instruction being single
- * stepped caused a page fault. We reset the current
- * kprobe, point the pc back to the probe address
- * and allow the page fault handler to continue as a
- * normal page fault.
- */
- regs->pc = (unsigned long)cur->addr;
- if (kcb->kprobe_status == KPROBE_REENTER)
- restore_previous_kprobe(kcb);
- else
- reset_current_kprobe();
- preempt_enable_no_resched();
- break;
- case KPROBE_HIT_ACTIVE:
- case KPROBE_HIT_SSDONE:
- /*
- * In case the user-specified fault handler returned
- * zero, try to fix up.
- */
- if ((entry = search_exception_tables(regs->pc)) != NULL) {
- regs->pc = entry->fixup;
- return 1;
- }
-
- /*
- * fixup_exception() could not handle it,
- * Let do_page_fault() fix it.
- */
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/*
- * Wrapper routine to for handling exceptions.
- */
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct kprobe *p = NULL;
- struct die_args *args = (struct die_args *)data;
- int ret = NOTIFY_DONE;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (args->regs->pc);
- if (val == DIE_TRAP &&
- args->trapnr == (BREAKPOINT_INSTRUCTION & 0xff)) {
- if (!kprobe_running()) {
- if (kprobe_handler(args->regs)) {
- ret = NOTIFY_STOP;
- } else {
- /* Not a kprobe trap */
- ret = NOTIFY_DONE;
- }
- } else {
- p = get_kprobe(addr);
- if ((kcb->kprobe_status == KPROBE_HIT_SS) ||
- (kcb->kprobe_status == KPROBE_REENTER)) {
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- } else {
- if (kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- }
- }
- }
-
- return ret;
-}
-
-static struct kprobe trampoline_p = {
- .addr = (kprobe_opcode_t *)&__kretprobe_trampoline,
- .pre_handler = trampoline_probe_handler
-};
-
-int __init arch_init_kprobes(void)
-{
- return register_kprobe(&trampoline_p);
-}
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
deleted file mode 100644
index 223c14f44af7e4..00000000000000
--- a/arch/sh/kernel/machine_kexec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- * LANDISK/sh4 supported by kogiidena
- */
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/numa.h>
-#include <linux/ftrace.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/sh_bios.h>
-#include <asm/reboot.h>
-
-typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
- unsigned long reboot_code_buffer,
- unsigned long start_address);
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-extern void *vbr_base;
-
-void native_machine_crash_shutdown(struct pt_regs *regs)
-{
- /* Nothing to do for UP, but definitely broken for SMP.. */
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
- return 0;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-}
-
-static void kexec_info(struct kimage *image)
-{
- int i;
- printk("kexec information\n");
- for (i = 0; i < image->nr_segments; i++) {
- printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
- i,
- (unsigned int)image->segment[i].mem,
- (unsigned int)image->segment[i].mem +
- image->segment[i].memsz,
- (unsigned int)image->segment[i].memsz);
- }
- printk(" start : 0x%08x\n\n", (unsigned int)image->start);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-void machine_kexec(struct kimage *image)
-{
- unsigned long page_list;
- unsigned long reboot_code_buffer;
- relocate_new_kernel_t rnk;
- unsigned long entry;
- unsigned long *ptr;
- int save_ftrace_enabled;
-
- /*
- * Nicked from the mips version of machine_kexec():
- * The generic kexec code builds a page list with physical
- * addresses. Use phys_to_virt() to convert them to virtual.
- */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (entry & IND_INDIRECTION) ?
- phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = (unsigned long) phys_to_virt(*ptr);
- }
-
-#ifdef CONFIG_KEXEC_JUMP
- if (image->preserve_context)
- save_processor_state();
-#endif
-
- save_ftrace_enabled = __ftrace_enabled_save();
-
- /* Interrupts aren't acceptable while we reboot */
- local_irq_disable();
-
- page_list = image->head;
-
- /* we need both effective and real address here */
- reboot_code_buffer =
- (unsigned long)page_address(image->control_code_page);
-
- /* copy our kernel relocation code to the control code page */
- memcpy((void *)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
-
- kexec_info(image);
- flush_cache_all();
-
- sh_bios_vbr_reload();
-
- /* now call it */
- rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer,
- (unsigned long)phys_to_virt(image->start));
-
-#ifdef CONFIG_KEXEC_JUMP
- asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-
- if (image->preserve_context)
- restore_processor_state();
-
- /* Convert page list back to physical addresses, what a mess. */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (*ptr & IND_INDIRECTION) ?
- phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = virt_to_phys(*ptr);
- }
-#endif
-
- __ftrace_enabled_restore(save_ftrace_enabled);
-}
-
-void arch_crash_save_vmcoreinfo(void)
-{
-#ifdef CONFIG_NUMA
- VMCOREINFO_SYMBOL(node_data);
- VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
-#ifdef CONFIG_X2TLB
- VMCOREINFO_CONFIG(X2TLB);
-#endif
-}
-
-void __init reserve_crashkernel(void)
-{
- unsigned long long crash_size, crash_base;
- int ret;
-
- ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
- &crash_size, &crash_base);
- if (ret == 0 && crash_size > 0) {
- crashk_res.start = crash_base;
- crashk_res.end = crash_base + crash_size - 1;
- }
-
- if (crashk_res.end == crashk_res.start)
- goto disable;
-
- crash_size = PAGE_ALIGN(resource_size(&crashk_res));
- if (!crashk_res.start) {
- unsigned long max = memblock_end_of_DRAM() - memory_limit;
- crashk_res.start = memblock_phys_alloc_range(crash_size,
- PAGE_SIZE, 0, max);
- if (!crashk_res.start) {
- pr_err("crashkernel allocation failed\n");
- goto disable;
- }
- } else {
- ret = memblock_reserve(crashk_res.start, crash_size);
- if (unlikely(ret < 0)) {
- pr_err("crashkernel reservation failed - "
- "memory is in use\n");
- goto disable;
- }
- }
-
- crashk_res.end = crashk_res.start + crash_size - 1;
-
- /*
- * Crash kernel trumps memory limit
- */
- if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
- memory_limit = 0;
- pr_info("Disabled memory limit for crashkernel\n");
- }
-
- pr_info("Reserving %ldMB of memory at 0x%08lx "
- "for crashkernel (System RAM: %ldMB)\n",
- (unsigned long)(crash_size >> 20),
- (unsigned long)(crashk_res.start),
- (unsigned long)(memblock_phys_mem_size() >> 20));
-
- return;
-
-disable:
- crashk_res.start = crashk_res.end = 0;
-}
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
deleted file mode 100644
index 57efaf5b82ae07..00000000000000
--- a/arch/sh/kernel/machvec.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/machvec.c
- *
- * The SuperH machine vector setup handlers, yanked from setup.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <asm/machvec.h>
-#include <asm/sections.h>
-#include <asm/addrspace.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-
-#define MV_NAME_SIZE 32
-
-#define for_each_mv(mv) \
- for ((mv) = (struct sh_machine_vector *)__machvec_start; \
- (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \
- (mv)++)
-
-static struct sh_machine_vector * __init get_mv_byname(const char *name)
-{
- struct sh_machine_vector *mv;
-
- for_each_mv(mv)
- if (strcasecmp(name, mv->mv_name) == 0)
- return mv;
-
- return NULL;
-}
-
-static unsigned int __initdata machvec_selected;
-
-static int __init early_parse_mv(char *from)
-{
- char mv_name[MV_NAME_SIZE] = "";
- char *mv_end;
- char *mv_comma;
- int mv_len;
- struct sh_machine_vector *mvp;
-
- mv_end = strchr(from, ' ');
- if (mv_end == NULL)
- mv_end = from + strlen(from);
-
- mv_comma = strchr(from, ',');
- mv_len = mv_end - from;
- if (mv_len > (MV_NAME_SIZE-1))
- mv_len = MV_NAME_SIZE-1;
- memcpy(mv_name, from, mv_len);
- mv_name[mv_len] = '\0';
- from = mv_end;
-
- machvec_selected = 1;
-
- /* Boot with the generic vector */
- if (strcmp(mv_name, "generic") == 0)
- return 0;
-
- mvp = get_mv_byname(mv_name);
- if (unlikely(!mvp)) {
- pr_info("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
- for_each_mv(mvp)
- pr_cont("'%s', ", mvp->mv_name);
- pr_cont("\n\n");
- panic("Failed to select machvec '%s' -- halting.\n",
- mv_name);
- } else
- sh_mv = *mvp;
-
- return 0;
-}
-early_param("sh_mv", early_parse_mv);
-
-void __init sh_mv_setup(void)
-{
- /*
- * Only overload the machvec if one hasn't been selected on
- * the command line with sh_mv=
- */
- if (!machvec_selected) {
- unsigned long machvec_size;
-
- machvec_size = ((unsigned long)__machvec_end -
- (unsigned long)__machvec_start);
-
- /*
- * Sanity check for machvec section alignment. Ensure
- * __initmv hasn't been misused.
- */
- if (machvec_size % sizeof(struct sh_machine_vector))
- panic("machvec misaligned, invalid __initmv use?");
-
- /*
- * If the machvec hasn't been preselected, use the first
- * vector (usually the only one) from .machvec.init.
- */
- if (machvec_size >= sizeof(struct sh_machine_vector))
- sh_mv = *(struct sh_machine_vector *)__machvec_start;
- }
-
- pr_notice("Booting machvec: %s\n", get_system_type());
-
- /*
- * Manually walk the vec, fill in anything that the board hasn't yet
- * by hand, wrapping to the generic implementation.
- */
-#define mv_set(elem) do { \
- if (!sh_mv.mv_##elem) \
- sh_mv.mv_##elem = generic_##elem; \
-} while (0)
-
- mv_set(irq_demux);
- mv_set(mode_pins);
- mv_set(mem_init);
-}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
deleted file mode 100644
index b9cee98a754e51..00000000000000
--- a/arch/sh/kernel/module.c
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Kernel module help for SH.
-
- SHcompact version by Kaz Kojima and Paul Mundt.
-
- SHmedia bits:
-
- Copyright 2004 SuperH (UK) Ltd
- Author: Richard Curnow
-
- Based on the sh version, and on code from the sh64-specific parts of
- modutils, originally written by Richard Curnow and Ben Gaster.
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/bug.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/unaligned.h>
-#include <asm/dwarf.h>
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- Elf32_Addr relocation;
- uint32_t *location;
- uint32_t value;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rel[i].r_info);
- relocation = sym->st_value + rel[i].r_addend;
-
- switch (ELF32_R_TYPE(rel[i].r_info)) {
- case R_SH_NONE:
- break;
- case R_SH_DIR32:
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_REL32:
- relocation = (relocation - (Elf32_Addr) location);
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_IMM_LOW16:
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16:
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- case R_SH_IMM_LOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, ELF32_R_TYPE(rel[i].r_info));
- return -ENOEXEC;
- }
- }
- return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
- const Elf_Shdr *sechdrs,
- struct module *me)
-{
- int ret = 0;
-
- ret |= module_dwarf_finalize(hdr, sechdrs, me);
-
- return ret;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
- module_dwarf_cleanup(mod);
-}
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
deleted file mode 100644
index 11777867c6f5fc..00000000000000
--- a/arch/sh/kernel/nmi_debug.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Atmel Corporation
- */
-#include <linux/delay.h>
-#include <linux/kdebug.h>
-#include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/hardirq.h>
-
-enum nmi_action {
- NMI_SHOW_STATE = 1 << 0,
- NMI_SHOW_REGS = 1 << 1,
- NMI_DIE = 1 << 2,
- NMI_DEBOUNCE = 1 << 3,
-};
-
-static unsigned long nmi_actions;
-
-static int nmi_debug_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (likely(val != DIE_NMI))
- return NOTIFY_DONE;
-
- if (nmi_actions & NMI_SHOW_STATE)
- show_state();
- if (nmi_actions & NMI_SHOW_REGS)
- show_regs(args->regs);
- if (nmi_actions & NMI_DEBOUNCE)
- mdelay(10);
- if (nmi_actions & NMI_DIE)
- return NOTIFY_BAD;
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block nmi_debug_nb = {
- .notifier_call = nmi_debug_notify,
-};
-
-static int __init nmi_debug_setup(char *str)
-{
- char *p, *sep;
-
- register_die_notifier(&nmi_debug_nb);
-
- if (*str != '=')
- return 0;
-
- for (p = str + 1; *p; p = sep + 1) {
- sep = strchr(p, ',');
- if (sep)
- *sep = 0;
- if (strcmp(p, "state") == 0)
- nmi_actions |= NMI_SHOW_STATE;
- else if (strcmp(p, "regs") == 0)
- nmi_actions |= NMI_SHOW_REGS;
- else if (strcmp(p, "debounce") == 0)
- nmi_actions |= NMI_DEBOUNCE;
- else if (strcmp(p, "die") == 0)
- nmi_actions |= NMI_DIE;
- else
- printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
- p);
- if (!sep)
- break;
- }
-
- return 0;
-}
-__setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
deleted file mode 100644
index c9d3aa18732d1d..00000000000000
--- a/arch/sh/kernel/perf_callchain.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event callchain support - SuperH architecture code
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/perf_event.h>
-#include <linux/percpu.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-
-static void callchain_address(void *data, unsigned long addr, int reliable)
-{
- struct perf_callchain_entry_ctx *entry = data;
-
- if (reliable)
- perf_callchain_store(entry, addr);
-}
-
-static const struct stacktrace_ops callchain_ops = {
- .address = callchain_address,
-};
-
-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
-{
- perf_callchain_store(entry, regs->pc);
-
- unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
-}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
deleted file mode 100644
index 1d2507f2243723..00000000000000
--- a/arch/sh/kernel/perf_event.c
+++ /dev/null
@@ -1,363 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event support framework for SuperH hardware counters.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * Heavily based on the x86 and PowerPC implementations.
- *
- * x86:
- * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2009 Jaswinder Singh Rajput
- * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- *
- * ppc:
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <linux/export.h>
-#include <asm/processor.h>
-
-struct cpu_hw_events {
- struct perf_event *events[MAX_HWEVENTS];
- unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-};
-
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-static struct sh_pmu *sh_pmu __read_mostly;
-
-/* Number of perf_events counting hardware events */
-static atomic_t num_events;
-/* Used to avoid races in calling reserve/release_pmc_hardware */
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-/*
- * Stub these out for now, do something more profound later.
- */
-int reserve_pmc_hardware(void)
-{
- return 0;
-}
-
-void release_pmc_hardware(void)
-{
-}
-
-static inline int sh_pmu_initialized(void)
-{
- return !!sh_pmu;
-}
-
-/*
- * Release the PMU if this is the last perf_event.
- */
-static void hw_perf_event_destroy(struct perf_event *event)
-{
- if (!atomic_add_unless(&num_events, -1, 1)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_dec_return(&num_events) == 0)
- release_pmc_hardware();
- mutex_unlock(&pmc_reserve_mutex);
- }
-}
-
-static int hw_perf_cache_event(int config, int *evp)
-{
- unsigned long type, op, result;
- int ev;
-
- if (!sh_pmu->cache_events)
- return -EINVAL;
-
- /* unpack config */
- type = config & 0xff;
- op = (config >> 8) & 0xff;
- result = (config >> 16) & 0xff;
-
- if (type >= PERF_COUNT_HW_CACHE_MAX ||
- op >= PERF_COUNT_HW_CACHE_OP_MAX ||
- result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return -EINVAL;
-
- ev = (*sh_pmu->cache_events)[type][op][result];
- if (ev == 0)
- return -EOPNOTSUPP;
- if (ev == -1)
- return -EINVAL;
- *evp = ev;
- return 0;
-}
-
-static int __hw_perf_event_init(struct perf_event *event)
-{
- struct perf_event_attr *attr = &event->attr;
- struct hw_perf_event *hwc = &event->hw;
- int config = -1;
- int err;
-
- if (!sh_pmu_initialized())
- return -ENODEV;
-
- /*
- * See if we need to reserve the counter.
- *
- * If no events are currently in use, then we have to take a
- * mutex to ensure that we don't race with another task doing
- * reserve_pmc_hardware or release_pmc_hardware.
- */
- err = 0;
- if (!atomic_inc_not_zero(&num_events)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&num_events) == 0 &&
- reserve_pmc_hardware())
- err = -EBUSY;
- else
- atomic_inc(&num_events);
- mutex_unlock(&pmc_reserve_mutex);
- }
-
- if (err)
- return err;
-
- event->destroy = hw_perf_event_destroy;
-
- switch (attr->type) {
- case PERF_TYPE_RAW:
- config = attr->config & sh_pmu->raw_event_mask;
- break;
- case PERF_TYPE_HW_CACHE:
- err = hw_perf_cache_event(attr->config, &config);
- if (err)
- return err;
- break;
- case PERF_TYPE_HARDWARE:
- if (attr->config >= sh_pmu->max_events)
- return -EINVAL;
-
- config = sh_pmu->event_map(attr->config);
- break;
- }
-
- if (config == -1)
- return -EINVAL;
-
- hwc->config |= config;
-
- return 0;
-}
-
-static void sh_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
-{
- u64 prev_raw_count, new_raw_count;
- s64 delta;
- int shift = 0;
-
- /*
- * Depending on the counter configuration, they may or may not
- * be chained, in which case the previous counter value can be
- * updated underneath us if the lower-half overflows.
- *
- * Our tactic to handle this is to first atomically read and
- * exchange a new raw count - then add that new-prev delta
- * count to the generic counter atomically.
- *
- * As there is no interrupt associated with the overflow events,
- * this is the simplest approach for maintaining consistency.
- */
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- new_raw_count = sh_pmu->read(idx);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- /*
- * Now we have the new raw value and have updated the prev
- * timestamp already. We can now calculate the elapsed delta
- * (counter-)time and add that to the generic counter.
- *
- * Careful, not all hw sign-extends above the physical width
- * of the count.
- */
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
-
- local64_add(delta, &event->count);
-}
-
-static void sh_pmu_stop(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (!(event->hw.state & PERF_HES_STOPPED)) {
- sh_pmu->disable(hwc, idx);
- cpuc->events[idx] = NULL;
- event->hw.state |= PERF_HES_STOPPED;
- }
-
- if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
- sh_perf_event_update(event, &event->hw, idx);
- event->hw.state |= PERF_HES_UPTODATE;
- }
-}
-
-static void sh_pmu_start(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (WARN_ON_ONCE(idx == -1))
- return;
-
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
- cpuc->events[idx] = event;
- event->hw.state = 0;
- sh_pmu->enable(hwc, idx);
-}
-
-static void sh_pmu_del(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-
- sh_pmu_stop(event, PERF_EF_UPDATE);
- __clear_bit(event->hw.idx, cpuc->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static int sh_pmu_add(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
- int ret = -EAGAIN;
-
- perf_pmu_disable(event->pmu);
-
- if (__test_and_set_bit(idx, cpuc->used_mask)) {
- idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
- if (idx == sh_pmu->num_events)
- goto out;
-
- __set_bit(idx, cpuc->used_mask);
- hwc->idx = idx;
- }
-
- sh_pmu->disable(hwc, idx);
-
- event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
- if (flags & PERF_EF_START)
- sh_pmu_start(event, PERF_EF_RELOAD);
-
- perf_event_update_userpage(event);
- ret = 0;
-out:
- perf_pmu_enable(event->pmu);
- return ret;
-}
-
-static void sh_pmu_read(struct perf_event *event)
-{
- sh_perf_event_update(event, &event->hw, event->hw.idx);
-}
-
-static int sh_pmu_event_init(struct perf_event *event)
-{
- int err;
-
- /* does not support taken branch sampling */
- if (has_branch_stack(event))
- return -EOPNOTSUPP;
-
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HW_CACHE:
- case PERF_TYPE_HARDWARE:
- err = __hw_perf_event_init(event);
- break;
-
- default:
- return -ENOENT;
- }
-
- if (unlikely(err)) {
- if (event->destroy)
- event->destroy(event);
- }
-
- return err;
-}
-
-static void sh_pmu_enable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->enable_all();
-}
-
-static void sh_pmu_disable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->disable_all();
-}
-
-static struct pmu pmu = {
- .pmu_enable = sh_pmu_enable,
- .pmu_disable = sh_pmu_disable,
- .event_init = sh_pmu_event_init,
- .add = sh_pmu_add,
- .del = sh_pmu_del,
- .start = sh_pmu_start,
- .stop = sh_pmu_stop,
- .read = sh_pmu_read,
-};
-
-static int sh_pmu_prepare_cpu(unsigned int cpu)
-{
- struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
-
- memset(cpuhw, 0, sizeof(struct cpu_hw_events));
- return 0;
-}
-
-int register_sh_pmu(struct sh_pmu *_pmu)
-{
- if (sh_pmu)
- return -EBUSY;
- sh_pmu = _pmu;
-
- pr_info("Performance Events: %s support registered\n", _pmu->name);
-
- /*
- * All of the on-chip counters are "limited", in that they have
- * no interrupts, and are therefore unable to do sampling without
- * further work and timer assistance.
- */
- pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-
- WARN_ON(_pmu->num_events > MAX_HWEVENTS);
-
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
- cpuhp_setup_state(CPUHP_PERF_SUPERH, "PERF_SUPERH", sh_pmu_prepare_cpu,
- NULL);
- return 0;
-}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
deleted file mode 100644
index 169832fcf21b2f..00000000000000
--- a/arch/sh/kernel/process.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task_stack.h>
-#include <linux/export.h>
-#include <linux/stackprotector.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-struct kmem_cache *task_xstate_cachep = NULL;
-unsigned int xstate_size;
-
-#ifdef CONFIG_STACKPROTECTOR
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
-/*
- * this gets called so that we can store lazy state into memory and copy the
- * current task into the new thread.
- */
-int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
-{
- unlazy_fpu(src, task_pt_regs(src));
- *dst = *src;
-
- if (src->thread.xstate) {
- dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!dst->thread.xstate)
- return -ENOMEM;
- memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
- }
-
- return 0;
-}
-
-void free_thread_xstate(struct task_struct *tsk)
-{
- if (tsk->thread.xstate) {
- kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
- tsk->thread.xstate = NULL;
- }
-}
-
-void arch_release_task_struct(struct task_struct *tsk)
-{
- free_thread_xstate(tsk);
-}
-
-void arch_task_cache_init(void)
-{
- if (!xstate_size)
- return;
-
- task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
- __alignof__(union thread_xstate),
- SLAB_PANIC, NULL);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-# define HAVE_SOFTFP 1
-#else
-# define HAVE_SOFTFP 0
-#endif
-
-void init_thread_xstate(void)
-{
- if (boot_cpu_data.flags & CPU_HAS_FPU)
- xstate_size = sizeof(struct sh_fpu_hard_struct);
- else if (HAVE_SOFTFP)
- xstate_size = sizeof(struct sh_fpu_soft_struct);
- else
- xstate_size = 0;
-}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
deleted file mode 100644
index 92b6649d492952..00000000000000
--- a/arch/sh/kernel/process_32.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/process.c
- *
- * This file handles the architecture-dependent parts of process handling..
- *
- * Copyright (C) 1995 Linus Torvalds
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- * Copyright (C) 2002 - 2008 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <linux/elfcore.h>
-#include <linux/fs.h>
-#include <linux/ftrace.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/prefetch.h>
-#include <linux/stackprotector.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/fpu.h>
-#include <asm/syscalls.h>
-#include <asm/switch_to.h>
-
-void show_regs(struct pt_regs * regs)
-{
- pr_info("\n");
- show_regs_print_info(KERN_DEFAULT);
-
- pr_info("PC is at %pS\n", (void *)instruction_pointer(regs));
- pr_info("PR is at %pS\n", (void *)regs->pr);
-
- pr_info("PC : %08lx SP : %08lx SR : %08lx ", regs->pc,
- regs->regs[15], regs->sr);
-#ifdef CONFIG_MMU
- pr_cont("TEA : %08x\n", __raw_readl(MMU_TEA));
-#else
- pr_cont("\n");
-#endif
-
- pr_info("R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
- regs->regs[0], regs->regs[1], regs->regs[2], regs->regs[3]);
- pr_info("R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
- regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
- pr_info("R8 : %08lx R9 : %08lx R10 : %08lx R11 : %08lx\n",
- regs->regs[8], regs->regs[9], regs->regs[10], regs->regs[11]);
- pr_info("R12 : %08lx R13 : %08lx R14 : %08lx\n",
- regs->regs[12], regs->regs[13], regs->regs[14]);
- pr_info("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n",
- regs->mach, regs->macl, regs->gbr, regs->pr);
-
- show_trace(NULL, (unsigned long *)regs->regs[15], regs, KERN_DEFAULT);
- show_code(regs);
-}
-
-void start_thread(struct pt_regs *regs, unsigned long new_pc,
- unsigned long new_sp)
-{
- regs->pr = 0;
- regs->sr = SR_FD;
- regs->pc = new_pc;
- regs->regs[15] = new_sp;
-
- free_thread_xstate(current);
-}
-EXPORT_SYMBOL(start_thread);
-
-void flush_thread(void)
-{
- struct task_struct *tsk = current;
-
- flush_ptrace_hw_breakpoint(tsk);
-
-#if defined(CONFIG_SH_FPU)
- /* Forget lazy FPU state */
- clear_fpu(tsk, task_pt_regs(tsk));
- clear_used_math();
-#endif
-}
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
-{
- unsigned long clone_flags = args->flags;
- unsigned long usp = args->stack;
- unsigned long tls = args->tls;
- struct thread_info *ti = task_thread_info(p);
- struct pt_regs *childregs;
-
-#if defined(CONFIG_SH_DSP)
- struct task_struct *tsk = current;
-
- if (is_dsp_enabled(tsk)) {
- /* We can use the __save_dsp or just copy the struct:
- * __save_dsp(p);
- * p->thread.dsp_status.status |= SR_DSP
- */
- p->thread.dsp_status = tsk->thread.dsp_status;
- }
-#endif
-
- memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
-
- childregs = task_pt_regs(p);
- p->thread.sp = (unsigned long) childregs;
- if (unlikely(args->fn)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- p->thread.pc = (unsigned long) ret_from_kernel_thread;
- childregs->regs[4] = (unsigned long) args->fn_arg;
- childregs->regs[5] = (unsigned long) args->fn;
- childregs->sr = SR_MD;
-#if defined(CONFIG_SH_FPU)
- childregs->sr |= SR_FD;
-#endif
- ti->status &= ~TS_USEDFPU;
- p->thread.fpu_counter = 0;
- return 0;
- }
- *childregs = *current_pt_regs();
-
- if (usp)
- childregs->regs[15] = usp;
-
- if (clone_flags & CLONE_SETTLS)
- childregs->gbr = tls;
-
- childregs->regs[0] = 0; /* Set return value for child */
- p->thread.pc = (unsigned long) ret_from_fork;
- return 0;
-}
-
-/*
- * switch_to(x,y) should switch tasks from x to y.
- *
- */
-__notrace_funcgraph struct task_struct *
-__switch_to(struct task_struct *prev, struct task_struct *next)
-{
- struct thread_struct *next_t = &next->thread;
-
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
- __stack_chk_guard = next->stack_canary;
-#endif
-
- unlazy_fpu(prev, task_pt_regs(prev));
-
- /* we're going to use this soon, after a few expensive things */
- if (next->thread.fpu_counter > 5)
- prefetch(next_t->xstate);
-
-#ifdef CONFIG_MMU
- /*
- * Restore the kernel mode register
- * k7 (r7_bank1)
- */
- asm volatile("ldc %0, r7_bank"
- : /* no output */
- : "r" (task_thread_info(next)));
-#endif
-
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- if (next->thread.fpu_counter > 5)
- __fpu_state_restore();
-
- return prev;
-}
-
-unsigned long __get_wchan(struct task_struct *p)
-{
- unsigned long pc;
-
- /*
- * The same comment as on the Alpha applies here, too ...
- */
- pc = thread_saved_pc(p);
-
-#ifdef CONFIG_FRAME_POINTER
- if (in_sched_functions(pc)) {
- unsigned long schedule_frame = (unsigned long)p->thread.sp;
- return ((unsigned long *)schedule_frame)[21];
- }
-#endif
-
- return pc;
-}
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
deleted file mode 100644
index bfc59f2c2602f4..00000000000000
--- a/arch/sh/kernel/ptrace.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/ptrace.h>
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name: the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (!strcmp(roff->name, name))
- return roff->offset;
- return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset: the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (roff->offset == offset)
- return roff->name;
- return NULL;
-}
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
deleted file mode 100644
index 36f50ad81e8329..00000000000000
--- a/arch/sh/kernel/ptrace_32.c
+++ /dev/null
@@ -1,487 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH process tracing
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- *
- * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-#include <linux/io.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/elf.h>
-#include <linux/regset.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/*
- * This routine will get a word off of the process kernel stack.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- return (*((int *)stack));
-}
-
-/*
- * This routine will put a word on the process kernel stack.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
- unsigned long data)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- *(unsigned long *) stack = data;
- return 0;
-}
-
-void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event_attr attr;
-
- /*
- * Disable the breakpoint request here since ptrace has defined a
- * one-shot behaviour for breakpoint exceptions.
- */
- attr = bp->attr;
- attr.disabled = true;
- modify_user_hw_breakpoint(bp, &attr);
-}
-
-static int set_single_step(struct task_struct *tsk, unsigned long addr)
-{
- struct thread_struct *thread = &tsk->thread;
- struct perf_event *bp;
- struct perf_event_attr attr;
-
- bp = thread->ptrace_bps[0];
- if (!bp) {
- ptrace_breakpoint_init(&attr);
-
- attr.bp_addr = addr;
- attr.bp_len = HW_BREAKPOINT_LEN_2;
- attr.bp_type = HW_BREAKPOINT_R;
-
- bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
- NULL, tsk);
- if (IS_ERR(bp))
- return PTR_ERR(bp);
-
- thread->ptrace_bps[0] = bp;
- } else {
- int err;
-
- attr = bp->attr;
- attr.bp_addr = addr;
- /* reenable breakpoint */
- attr.disabled = false;
- err = modify_user_hw_breakpoint(bp, &attr);
- if (unlikely(err))
- return err;
- }
-
- return 0;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
- unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
-
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
-
- set_single_step(child, pc);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
-
-static int genregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_regs *regs = task_pt_regs(target);
-
- return membuf_write(&to, regs, sizeof(struct pt_regs));
-}
-
-static int genregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_regs *regs = task_pt_regs(target);
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- regs->regs,
- 0, 16 * sizeof(unsigned long));
- if (!ret && count > 0)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s->pc,
- offsetof(struct pt_regs, pc),
- sizeof(struct pt_regs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_regs), -1);
-
- return ret;
-}
-
-#ifdef CONFIG_SH_FPU
-static int fpregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- return membuf_write(&to, target->thread.xstate,
- sizeof(struct user_fpu_struct));
-}
-
-static int fpregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- set_stopped_child_used_math(target);
-
- if ((boot_cpu_data.flags & CPU_HAS_FPU))
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->hardfpu, 0, -1);
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->softfpu, 0, -1);
-}
-
-static int fpregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- return tsk_used_math(target) ? regset->n : 0;
-}
-#endif
-
-#ifdef CONFIG_SH_DSP
-static int dspregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
-
- return membuf_write(&to, regs, sizeof(struct pt_dspregs));
-}
-
-static int dspregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs,
- 0, sizeof(struct pt_dspregs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_dspregs), -1);
-
- return ret;
-}
-
-static int dspregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- struct pt_regs *regs = task_pt_regs(target);
-
- return regs->sr & SR_DSP ? regset->n : 0;
-}
-#endif
-
-const struct pt_regs_offset regoffset_table[] = {
- REGS_OFFSET_NAME(0),
- REGS_OFFSET_NAME(1),
- REGS_OFFSET_NAME(2),
- REGS_OFFSET_NAME(3),
- REGS_OFFSET_NAME(4),
- REGS_OFFSET_NAME(5),
- REGS_OFFSET_NAME(6),
- REGS_OFFSET_NAME(7),
- REGS_OFFSET_NAME(8),
- REGS_OFFSET_NAME(9),
- REGS_OFFSET_NAME(10),
- REGS_OFFSET_NAME(11),
- REGS_OFFSET_NAME(12),
- REGS_OFFSET_NAME(13),
- REGS_OFFSET_NAME(14),
- REGS_OFFSET_NAME(15),
- REG_OFFSET_NAME(pc),
- REG_OFFSET_NAME(pr),
- REG_OFFSET_NAME(sr),
- REG_OFFSET_NAME(gbr),
- REG_OFFSET_NAME(mach),
- REG_OFFSET_NAME(macl),
- REG_OFFSET_NAME(tra),
- REG_OFFSET_END,
-};
-
-/*
- * These are our native regset flavours.
- */
-enum sh_regset {
- REGSET_GENERAL,
-#ifdef CONFIG_SH_FPU
- REGSET_FPU,
-#endif
-#ifdef CONFIG_SH_DSP
- REGSET_DSP,
-#endif
-};
-
-static const struct user_regset sh_regsets[] = {
- /*
- * Format is:
- * R0 --> R15
- * PC, PR, SR, GBR, MACH, MACL, TRA
- */
- [REGSET_GENERAL] = {
- .core_note_type = NT_PRSTATUS,
- .n = ELF_NGREG,
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = genregs_get,
- .set = genregs_set,
- },
-
-#ifdef CONFIG_SH_FPU
- [REGSET_FPU] = {
- .core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_fpu_struct) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = fpregs_get,
- .set = fpregs_set,
- .active = fpregs_active,
- },
-#endif
-
-#ifdef CONFIG_SH_DSP
- [REGSET_DSP] = {
- .n = sizeof(struct pt_dspregs) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = dspregs_get,
- .set = dspregs_set,
- .active = dspregs_active,
- },
-#endif
-};
-
-static const struct user_regset_view user_sh_native_view = {
- .name = "sh",
- .e_machine = EM_SH,
- .regsets = sh_regsets,
- .n = ARRAY_SIZE(sh_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
- return &user_sh_native_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- unsigned long __user *datap = (unsigned long __user *)data;
- int ret;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- tmp = get_stack_long(child, addr);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- if (!tsk_used_math(child)) {
- if (addr == offsetof(struct user, fpu.fpscr))
- tmp = FPSCR_INIT;
- else
- tmp = 0;
- } else {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- tmp = ((unsigned long *)child->thread.xstate)
- [index >> 2];
- }
- } else if (addr == offsetof(struct user, u_fpvalid))
- tmp = !!tsk_used_math(child);
- else if (addr == PT_TEXT_ADDR)
- tmp = child->mm->start_code;
- else if (addr == PT_DATA_ADDR)
- tmp = child->mm->start_data;
- else if (addr == PT_TEXT_END_ADDR)
- tmp = child->mm->end_code;
- else if (addr == PT_TEXT_LEN)
- tmp = child->mm->end_code - child->mm->start_code;
- else
- tmp = 0;
- ret = put_user(tmp, datap);
- break;
- }
-
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- ret = put_stack_long(child, addr, data);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- set_stopped_child_used_math(child);
- ((unsigned long *)child->thread.xstate)
- [index >> 2] = data;
- ret = 0;
- } else if (addr == offsetof(struct user, u_fpvalid)) {
- conditional_stopped_child_used_math(data, child);
- ret = 0;
- }
- break;
-
- case PTRACE_GETREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
- case PTRACE_SETREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
-#ifdef CONFIG_SH_FPU
- case PTRACE_GETFPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
- case PTRACE_SETFPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
-#endif
-#ifdef CONFIG_SH_DSP
- case PTRACE_GETDSPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
- case PTRACE_SETDSPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
-#endif
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
-
- return ret;
-}
-
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
-{
- if (test_thread_flag(TIF_SYSCALL_TRACE) &&
- ptrace_report_syscall_entry(regs)) {
- regs->regs[0] = -ENOSYS;
- return -1;
- }
-
- if (secure_computing() == -1)
- return -1;
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_enter(regs, regs->regs[0]);
-
- audit_syscall_entry(regs->regs[3], regs->regs[4], regs->regs[5],
- regs->regs[6], regs->regs[7]);
-
- return 0;
-}
-
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
-{
- int step;
-
- audit_syscall_exit(regs);
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[0]);
-
- step = test_thread_flag(TIF_SINGLESTEP);
- if (step || test_thread_flag(TIF_SYSCALL_TRACE))
- ptrace_report_syscall_exit(regs, step);
-}
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
deleted file mode 100644
index e8eeedc9b1822d..00000000000000
--- a/arch/sh/kernel/reboot.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pm.h>
-#include <linux/kexec.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-#include <asm/watchdog.h>
-#include <asm/addrspace.h>
-#include <asm/reboot.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-static void watchdog_trigger_immediate(void)
-{
- sh_wdt_write_cnt(0xFF);
- sh_wdt_write_csr(0xC2);
-}
-
-static void native_machine_restart(char * __unused)
-{
- local_irq_disable();
-
- /* Destroy all of the TLBs in preparation for reset by MMU */
- __flush_tlb_global();
-
- /* Address error with SR.BL=1 first. */
- trigger_address_error();
-
- /* If that fails or is unsupported, go for the watchdog next. */
- watchdog_trigger_immediate();
-
- /*
- * Give up and sleep.
- */
- while (1)
- cpu_sleep();
-}
-
-static void native_machine_shutdown(void)
-{
- smp_send_stop();
-}
-
-static void native_machine_power_off(void)
-{
- do_kernel_power_off();
-}
-
-static void native_machine_halt(void)
-{
- /* stop other cpus */
- machine_shutdown();
-
- /* stop this cpu */
- stop_this_cpu(NULL);
-}
-
-struct machine_ops machine_ops = {
- .power_off = native_machine_power_off,
- .shutdown = native_machine_shutdown,
- .restart = native_machine_restart,
- .halt = native_machine_halt,
-#ifdef CONFIG_KEXEC
- .crash_shutdown = native_machine_crash_shutdown,
-#endif
-};
-
-void machine_power_off(void)
-{
- machine_ops.power_off();
-}
-
-void machine_shutdown(void)
-{
- machine_ops.shutdown();
-}
-
-void machine_restart(char *cmd)
-{
- machine_ops.restart(cmd);
-}
-
-void machine_halt(void)
-{
- machine_ops.halt();
-}
-
-#ifdef CONFIG_KEXEC
-void machine_crash_shutdown(struct pt_regs *regs)
-{
- machine_ops.crash_shutdown(regs);
-}
-#endif
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
deleted file mode 100644
index d9bf2b727b429e..00000000000000
--- a/arch/sh/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * relocate_kernel.S - put the kernel image in place to boot
- * 2005.9.17 kogiidena@eggplant.ddo.jp
- *
- * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
- *
- * 2009-03-18 Magnus Damm - Added Kexec Jump support
- */
-#include <linux/linkage.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
- .globl relocate_new_kernel
-relocate_new_kernel:
- /* r4 = indirection_page */
- /* r5 = reboot_code_buffer */
- /* r6 = start_address */
-
- mov.l 10f, r0 /* PAGE_SIZE */
- add r5, r0 /* setup new stack at end of control page */
-
- /* save r15->r8 to new stack */
- mov.l r15, @-r0
- mov r0, r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* save other random registers */
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- stc.l sr, @-r15
- sts.l pr, @-r15
- stc.l spc, @-r15
-
- /* switch to bank1 and save r7->r0 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- /* switch to bank0 and save r7->r0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- mov.l r4, @-r15 /* save indirection page again */
-
- bsr swap_pages /* swap pages before jumping to new kernel */
- nop
-
- mova 11f, r0
- mov.l r15, @r0 /* save pointer to stack */
-
- jsr @r6 /* hand over control to new kernel */
- nop
-
- mov.l 11f, r15 /* get pointer to stack */
- mov.l @r15+, r4 /* restore r4 to get indirection page */
-
- bsr swap_pages /* swap pages back to previous state */
- nop
-
- /* make sure bank0 is active and restore r0->r7 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch to bank1 and restore r0->r7 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch back to bank0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
-
- /* restore other random registers */
- ldc.l @r15+, spc
- lds.l @r15+, pr
- ldc.l @r15+, sr
- ldc.l @r15+, ssr
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
-
- /* restore r8->r15 */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, r15
- rts
- nop
-
-swap_pages:
- bra 1f
- mov r4,r0 /* cmd = indirection_page */
-0:
- mov.l @r4+,r0 /* cmd = *ind++ */
-
-1: /* addr = cmd & 0xfffffff0 */
- mov r0,r2
- mov #-16,r1
- and r1,r2
-
- /* if(cmd & IND_DESTINATION) dst = addr */
- tst #1,r0
- bt 2f
- bra 0b
- mov r2,r5
-
-2: /* else if(cmd & IND_INDIRECTION) ind = addr */
- tst #2,r0
- bt 3f
- bra 0b
- mov r2,r4
-
-3: /* else if(cmd & IND_DONE) return */
- tst #4,r0
- bt 4f
- rts
- nop
-
-4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
- tst #8,r0
- bt 0b
-
- mov.l 10f,r3 /* PAGE_SIZE */
- shlr2 r3
- shlr2 r3
-5:
- dt r3
-
- /* regular kexec just overwrites the destination page
- * with the contents of the source page.
- * for the kexec jump case we need to swap the contents
- * of the pages.
- * to keep it simple swap the contents for both cases.
- */
- mov.l @(0, r2), r8
- mov.l @(0, r5), r1
- mov.l r8, @(0, r5)
- mov.l r1, @(0, r2)
-
- mov.l @(4, r2), r8
- mov.l @(4, r5), r1
- mov.l r8, @(4, r5)
- mov.l r1, @(4, r2)
-
- mov.l @(8, r2), r8
- mov.l @(8, r5), r1
- mov.l r8, @(8, r5)
- mov.l r1, @(8, r2)
-
- mov.l @(12, r2), r8
- mov.l @(12, r5), r1
- mov.l r8, @(12, r5)
- mov.l r1, @(12, r2)
-
- add #16,r5
- add #16,r2
- bf 5b
-
- bra 0b
- nop
-
- .align 2
-10:
- .long PAGE_SIZE
-11:
- .long 0
-12:
- .long 0x20000000 ! RB=1
-
-relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-relocate_new_kernel_size:
- .long relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
deleted file mode 100644
index 8838094c9ff944..00000000000000
--- a/arch/sh/kernel/return_address.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/return_address.c
- *
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dwarf.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-void *return_address(unsigned int depth)
-{
- struct dwarf_frame *frame;
- unsigned long ra;
- int i;
-
- for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
- struct dwarf_frame *tmp;
-
- tmp = dwarf_unwind_stack(ra, frame);
- if (!tmp)
- return NULL;
-
- if (frame)
- dwarf_free_frame(frame);
-
- frame = tmp;
-
- if (!frame || !frame->return_addr)
- break;
-
- ra = frame->return_addr;
- }
-
- /* Failed to unwind the stack to the specified depth. */
- WARN_ON(i != depth + 1);
-
- if (frame)
- dwarf_free_frame(frame);
-
- return (void *)ra;
-}
-
-#else
-
-void *return_address(unsigned int depth)
-{
- return NULL;
-}
-
-#endif
-
-EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
deleted file mode 100644
index 1fcb6659822a30..00000000000000
--- a/arch/sh/kernel/setup.c
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/setup.c
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/utsname.h>
-#include <linux/nodemask.h>
-#include <linux/cpu.h>
-#include <linux/pfn.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/err.h>
-#include <linux/crash_dump.h>
-#include <linux/mmzone.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/uaccess.h>
-#include <uapi/linux/mount.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/elf.h>
-#include <asm/sections.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/clock.h>
-#include <asm/smp.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/sparsemem.h>
-#include <asm/platform_early.h>
-
-/*
- * Initialize loops_per_jiffy as 10000000 (1000MIPS).
- * This value will be used at the very early stage of serial setup.
- * The bigger value means no problem.
- */
-struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
- [0] = {
- .type = CPU_SH_NONE,
- .family = CPU_FAMILY_UNKNOWN,
- .loops_per_jiffy = 10000000,
- .phys_bits = MAX_PHYSMEM_BITS,
- },
-};
-EXPORT_SYMBOL(cpu_data);
-
-/*
- * The machine vector. First entry in .machvec.init, or clobbered by
- * sh_mv= on the command line, prior to .machvec.init teardown.
- */
-struct sh_machine_vector sh_mv = { .mv_name = "generic", };
-EXPORT_SYMBOL(sh_mv);
-
-#ifdef CONFIG_VT
-struct screen_info screen_info;
-#endif
-
-extern int root_mountflags;
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-
-static struct resource code_resource = {
- .name = "Kernel code",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource data_resource = {
- .name = "Kernel data",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-unsigned long memory_start;
-EXPORT_SYMBOL(memory_start);
-unsigned long memory_end = 0;
-EXPORT_SYMBOL(memory_end);
-unsigned long memory_limit = 0;
-
-static struct resource mem_resources[MAX_NUMNODES];
-
-int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-static int __init early_parse_mem(char *p)
-{
- if (!p)
- return 1;
-
- memory_limit = PAGE_ALIGN(memparse(p, &p));
-
- pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
-
- return 0;
-}
-early_param("mem", early_parse_mem);
-
-void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- unsigned long start, end;
-
- /*
- * Check for the rare cases where boot loaders adhere to the boot
- * ABI.
- */
- if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
- goto disable;
-
- start = INITRD_START + __MEMORY_START;
- end = start + INITRD_SIZE;
-
- if (unlikely(end <= start))
- goto disable;
- if (unlikely(start & ~PAGE_MASK)) {
- pr_err("initrd must be page aligned\n");
- goto disable;
- }
-
- if (unlikely(start < __MEMORY_START)) {
- pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",
- start, __MEMORY_START);
- goto disable;
- }
-
- if (unlikely(end > memblock_end_of_DRAM())) {
- pr_err("initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- end, (unsigned long)memblock_end_of_DRAM());
- goto disable;
- }
-
- /*
- * If we got this far in spite of the boot loader's best efforts
- * to the contrary, assume we actually have a valid initrd and
- * fix up the root dev.
- */
- ROOT_DEV = Root_RAM0;
-
- /*
- * Address sanitization
- */
- initrd_start = (unsigned long)__va(start);
- initrd_end = initrd_start + INITRD_SIZE;
-
- memblock_reserve(__pa(initrd_start), INITRD_SIZE);
-
- return;
-
-disable:
- pr_info("initrd disabled\n");
- initrd_start = initrd_end = 0;
-#endif
-}
-
-#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
-void calibrate_delay(void)
-{
- struct clk *clk = clk_get(NULL, "cpu_clk");
-
- if (IS_ERR(clk))
- panic("Need a sane CPU clock definition!");
-
- loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
-
- printk(KERN_INFO "Calibrating delay loop (skipped)... "
- "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100,
- loops_per_jiffy);
-}
-#endif
-
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- struct resource *res = &mem_resources[nid];
- unsigned long start, end;
-
- WARN_ON(res->name); /* max one active range per node for now */
-
- start = start_pfn << PAGE_SHIFT;
- end = end_pfn << PAGE_SHIFT;
-
- res->name = "System RAM";
- res->start = start;
- res->end = end - 1;
- res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
- if (request_resource(&iomem_resource, res)) {
- pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
- start_pfn, end_pfn);
- return;
- }
-
- /*
- * We don't know which RAM region contains kernel data or
- * the reserved crashkernel region, so try it repeatedly
- * and let the resource manager test it.
- */
- request_resource(res, &code_resource);
- request_resource(res, &data_resource);
- request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
-#endif
-
- /*
- * Also make sure that there is a PMB mapping that covers this
- * range before we attempt to activate it, to avoid reset by MMU.
- * We can hit this path with NUMA or memory hot-add.
- */
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_set_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn),
- &memblock.memory, nid);
-}
-
-void __init __weak plat_early_device_setup(void)
-{
-}
-
-#ifdef CONFIG_OF_FLATTREE
-void __ref sh_fdt_init(phys_addr_t dt_phys)
-{
- static int done = 0;
- void *dt_virt;
-
- /* Avoid calling an __init function on secondary cpus. */
- if (done) return;
-
-#ifdef CONFIG_USE_BUILTIN_DTB
- dt_virt = __dtb_start;
-#else
- dt_virt = phys_to_virt(dt_phys);
-#endif
-
- if (!dt_virt || !early_init_dt_scan(dt_virt)) {
- pr_crit("Error: invalid device tree blob"
- " at physical address %p\n", (void *)dt_phys);
-
- while (true)
- cpu_relax();
- }
-
- done = 1;
-}
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
- enable_mmu();
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
- printk(KERN_NOTICE "Boot params:\n"
- "... MOUNT_ROOT_RDONLY - %08lx\n"
- "... RAMDISK_FLAGS - %08lx\n"
- "... ORIG_ROOT_DEV - %08lx\n"
- "... LOADER_TYPE - %08lx\n"
- "... INITRD_START - %08lx\n"
- "... INITRD_SIZE - %08lx\n",
- MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
- ORIG_ROOT_DEV, LOADER_TYPE,
- INITRD_START, INITRD_SIZE);
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-#endif
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- setup_initial_init_mm(_text, _etext, _edata, _end);
-
- code_resource.start = virt_to_phys(_text);
- code_resource.end = virt_to_phys(_etext)-1;
- data_resource.start = virt_to_phys(_etext);
- data_resource.end = virt_to_phys(_edata)-1;
- bss_resource.start = virt_to_phys(__bss_start);
- bss_resource.end = virt_to_phys(__bss_stop)-1;
-
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#ifdef CONFIG_CMDLINE_EXTEND
- strlcat(command_line, " ", sizeof(command_line));
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
-#endif
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_early_param();
-
- plat_early_device_setup();
-
- sh_mv_setup();
-
- /* Let earlyprintk output early console messages */
- sh_early_platform_driver_probe("earlyprintk", 1, 1);
-
-#ifdef CONFIG_OF_FLATTREE
-#ifdef CONFIG_USE_BUILTIN_DTB
- unflatten_and_copy_device_tree();
-#else
- unflatten_device_tree();
-#endif
-#endif
-
- paging_init();
-
- /* Perform the machine specific initialisation */
- if (likely(sh_mv.mv_setup))
- sh_mv.mv_setup(cmdline_p);
-
- plat_smp_setup();
-}
-
-/* processor boot mode configuration */
-int generic_mode_pins(void)
-{
- pr_warn("generic_mode_pins(): missing mode pin configuration\n");
- return 0;
-}
-
-int test_mode_pin(int pin)
-{
- return sh_mv.mv_mode_pins() & pin;
-}
diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c
deleted file mode 100644
index 250dbdf3fa7497..00000000000000
--- a/arch/sh/kernel/sh_bios.c
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * C interface for trapping into the standard LinuxSH BIOS.
- *
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 - 2010 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <asm/sh_bios.h>
-
-#define BIOS_CALL_CONSOLE_WRITE 0
-#define BIOS_CALL_ETH_NODE_ADDR 10
-#define BIOS_CALL_SHUTDOWN 11
-#define BIOS_CALL_GDB_DETACH 0xff
-
-void *gdb_vbr_vector = NULL;
-
-static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
- long arg3)
-{
- register long r0 __asm__("r0") = func;
- register long r4 __asm__("r4") = arg0;
- register long r5 __asm__("r5") = arg1;
- register long r6 __asm__("r6") = arg2;
- register long r7 __asm__("r7") = arg3;
-
- if (!gdb_vbr_vector)
- return -ENOSYS;
-
- __asm__ __volatile__("trapa #0x3f":"=z"(r0)
- :"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
- :"memory");
- return r0;
-}
-
-void sh_bios_console_write(const char *buf, unsigned int len)
-{
- sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
-}
-
-void sh_bios_gdb_detach(void)
-{
- sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_gdb_detach);
-
-void sh_bios_get_node_addr(unsigned char *node_addr)
-{
- sh_bios_call(BIOS_CALL_ETH_NODE_ADDR, 0, (long)node_addr, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_get_node_addr);
-
-void sh_bios_shutdown(unsigned int how)
-{
- sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
-}
-
-/*
- * Read the old value of the VBR register to initialise the vector
- * through which debug and BIOS traps are delegated by the Linux trap
- * handler.
- */
-void sh_bios_vbr_init(void)
-{
- unsigned long vbr;
-
- if (unlikely(gdb_vbr_vector))
- return;
-
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
-
- if (vbr) {
- gdb_vbr_vector = (void *)(vbr + 0x100);
- printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
- gdb_vbr_vector);
- } else
- printk(KERN_NOTICE "SH-BIOS not detected\n");
-}
-
-/**
- * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
- *
- * This can be used by save/restore code to reinitialize the system VBR
- * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
- */
-void sh_bios_vbr_reload(void)
-{
- if (gdb_vbr_vector)
- __asm__ __volatile__ (
- "ldc %0, vbr"
- :
- : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
- : "memory"
- );
-}
-
-#ifdef CONFIG_EARLY_PRINTK
-/*
- * Print a string through the BIOS
- */
-static void sh_console_write(struct console *co, const char *s,
- unsigned count)
-{
- sh_bios_console_write(s, count);
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init sh_console_setup(struct console *co, char *options)
-{
- int cflag = CREAD | HUPCL | CLOCAL;
-
- /*
- * Now construct a cflag setting.
- * TODO: this is a totally bogus cflag, as we have
- * no idea what serial settings the BIOS is using, or
- * even if its using the serial port at all.
- */
- cflag |= B115200 | CS8 | /*no parity*/0;
-
- co->cflag = cflag;
-
- return 0;
-}
-
-static struct console bios_console = {
- .name = "bios",
- .write = sh_console_write,
- .setup = sh_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
- int keep_early = 0;
-
- if (!buf)
- return 0;
-
- if (strstr(buf, "keep"))
- keep_early = 1;
-
- if (!strncmp(buf, "bios", 4))
- early_console = &bios_console;
-
- if (likely(early_console)) {
- if (keep_early)
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
- }
-
- return 0;
-}
-early_param("earlyprintk", setup_early_printk);
-#endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
deleted file mode 100644
index 5858936cb43111..00000000000000
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <asm/checksum.h>
-#include <asm/sections.h>
-
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(empty_zero_page);
-#ifdef CONFIG_FLATMEM
-/* need in pfn_valid macro */
-EXPORT_SYMBOL(min_low_pfn);
-EXPORT_SYMBOL(max_low_pfn);
-#endif
-
-#define DECLARE_EXPORT(name) \
- extern void name(void);EXPORT_SYMBOL(name)
-
-DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__sdivsi3);
-DECLARE_EXPORT(__lshrsi3);
-DECLARE_EXPORT(__ashrsi3);
-DECLARE_EXPORT(__ashlsi3);
-DECLARE_EXPORT(__lshrsi3_r0);
-DECLARE_EXPORT(__ashrsi3_r0);
-DECLARE_EXPORT(__ashlsi3_r0);
-
-DECLARE_EXPORT(__ashiftrt_r4_0);
-DECLARE_EXPORT(__ashiftrt_r4_1);
-DECLARE_EXPORT(__ashiftrt_r4_2);
-DECLARE_EXPORT(__ashiftrt_r4_3);
-DECLARE_EXPORT(__ashiftrt_r4_4);
-DECLARE_EXPORT(__ashiftrt_r4_5);
-DECLARE_EXPORT(__ashiftrt_r4_6);
-DECLARE_EXPORT(__ashiftrt_r4_7);
-DECLARE_EXPORT(__ashiftrt_r4_8);
-DECLARE_EXPORT(__ashiftrt_r4_9);
-DECLARE_EXPORT(__ashiftrt_r4_10);
-DECLARE_EXPORT(__ashiftrt_r4_11);
-DECLARE_EXPORT(__ashiftrt_r4_12);
-DECLARE_EXPORT(__ashiftrt_r4_13);
-DECLARE_EXPORT(__ashiftrt_r4_14);
-DECLARE_EXPORT(__ashiftrt_r4_15);
-DECLARE_EXPORT(__ashiftrt_r4_16);
-DECLARE_EXPORT(__ashiftrt_r4_17);
-DECLARE_EXPORT(__ashiftrt_r4_18);
-DECLARE_EXPORT(__ashiftrt_r4_19);
-DECLARE_EXPORT(__ashiftrt_r4_20);
-DECLARE_EXPORT(__ashiftrt_r4_21);
-DECLARE_EXPORT(__ashiftrt_r4_22);
-DECLARE_EXPORT(__ashiftrt_r4_23);
-DECLARE_EXPORT(__ashiftrt_r4_24);
-DECLARE_EXPORT(__ashiftrt_r4_25);
-DECLARE_EXPORT(__ashiftrt_r4_26);
-DECLARE_EXPORT(__ashiftrt_r4_27);
-DECLARE_EXPORT(__ashiftrt_r4_28);
-DECLARE_EXPORT(__ashiftrt_r4_29);
-DECLARE_EXPORT(__ashiftrt_r4_30);
-DECLARE_EXPORT(__ashiftrt_r4_31);
-DECLARE_EXPORT(__ashiftrt_r4_32);
-DECLARE_EXPORT(__movstr);
-DECLARE_EXPORT(__movstrSI8);
-DECLARE_EXPORT(__movstrSI12);
-DECLARE_EXPORT(__movstrSI16);
-DECLARE_EXPORT(__movstrSI20);
-DECLARE_EXPORT(__movstrSI24);
-DECLARE_EXPORT(__movstrSI28);
-DECLARE_EXPORT(__movstrSI32);
-DECLARE_EXPORT(__movstrSI36);
-DECLARE_EXPORT(__movstrSI40);
-DECLARE_EXPORT(__movstrSI44);
-DECLARE_EXPORT(__movstrSI48);
-DECLARE_EXPORT(__movstrSI52);
-DECLARE_EXPORT(__movstrSI56);
-DECLARE_EXPORT(__movstrSI60);
-DECLARE_EXPORT(__movstr_i4_even);
-DECLARE_EXPORT(__movstr_i4_odd);
-DECLARE_EXPORT(__movstrSI12_i4);
-DECLARE_EXPORT(__movmem);
-DECLARE_EXPORT(__movmemSI8);
-DECLARE_EXPORT(__movmemSI12);
-DECLARE_EXPORT(__movmemSI16);
-DECLARE_EXPORT(__movmemSI20);
-DECLARE_EXPORT(__movmemSI24);
-DECLARE_EXPORT(__movmemSI28);
-DECLARE_EXPORT(__movmemSI32);
-DECLARE_EXPORT(__movmemSI36);
-DECLARE_EXPORT(__movmemSI40);
-DECLARE_EXPORT(__movmemSI44);
-DECLARE_EXPORT(__movmemSI48);
-DECLARE_EXPORT(__movmemSI52);
-DECLARE_EXPORT(__movmemSI56);
-DECLARE_EXPORT(__movmemSI60);
-DECLARE_EXPORT(__movmem_i4_even);
-DECLARE_EXPORT(__movmem_i4_odd);
-DECLARE_EXPORT(__movmemSI12_i4);
-DECLARE_EXPORT(__udiv_qrnnd_16);
-DECLARE_EXPORT(__sdivsi3_i4);
-DECLARE_EXPORT(__udivsi3_i4);
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udivsi3_i4i);
-#ifdef CONFIG_MCOUNT
-DECLARE_EXPORT(mcount);
-#endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
deleted file mode 100644
index 90f495d35db29a..00000000000000
--- a/arch/sh/kernel/signal_32.c
+++ /dev/null
@@ -1,507 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- *
- */
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/tty.h>
-#include <linux/elf.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/io.h>
-#include <linux/resume_user_mode.h>
-#include <asm/ucontext.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-struct fdpic_func_descriptor {
- unsigned long text;
- unsigned long GOT;
-};
-
-/*
- * The following define adds a 64 byte gap between the signal
- * stack frame and previous contents of the stack. This allows
- * frame unwinding in a function epilogue but only if a frame
- * pointer is used in the function. This is necessary because
- * current gcc compilers (<4.3) do not generate unwind info on
- * SH for function epilogues.
- */
-#define UNWINDGUARD 64
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
-#if defined(CONFIG_CPU_SH2)
-#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */
-#else
-#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */
-#endif
-#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */
-
-struct sigframe
-{
- struct sigcontext sc;
- unsigned long extramask[_NSIG_WORDS-1];
- u16 retcode[8];
-};
-
-struct rt_sigframe
-{
- struct siginfo info;
- struct ucontext uc;
- u16 retcode[8];
-};
-
-#ifdef CONFIG_SH_FPU
-static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- set_used_math();
- return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
- sizeof(long)*(16*2+2));
-}
-
-static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
- struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- if (!used_math())
- return __put_user(0, &sc->sc_ownedfp);
-
- if (__put_user(1, &sc->sc_ownedfp))
- return -EFAULT;
-
- /* This will cause a "finit" to be triggered by the next
- attempted FPU operation by the 'current' process.
- */
- clear_used_math();
-
- unlazy_fpu(tsk, regs);
- return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
- sizeof(long)*(16*2+2));
-}
-#endif /* CONFIG_SH_FPU */
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
-{
- unsigned int err = 0;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
- COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- int owned_fp;
- struct task_struct *tsk = current;
-
- regs->sr |= SR_FD; /* Release FPU */
- clear_fpu(tsk, regs);
- clear_used_math();
- err |= __get_user (owned_fp, &sc->sc_ownedfp);
- if (owned_fp)
- err |= restore_sigcontext_fpu(sc);
- }
-#endif
-
- regs->tra = -1; /* disable syscall checks */
- err |= __get_user(*r0_p, &sc->sc_regs[0]);
- return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->sc, &r0))
- goto badframe;
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
- goto badframe;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
-#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
- COPY(regs[0]); COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- err |= save_sigcontext_fpu(sc, regs);
-#endif
-
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(sp) == 0)
- sp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
-}
-
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-trapa.S. */
-extern void __kernel_sigreturn(void);
-extern void __kernel_rt_sigreturn(void);
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
- if (_NSIG_WORDS > 1)
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = 0;
- regs->regs[6] = (unsigned long) &frame->sc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(NULL, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->regs[15]);
- err |= setup_sigcontext(&frame->uc.uc_mcontext,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to rt_sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = (unsigned long) &frame->info;
- regs->regs[6] = (unsigned long) &frame->uc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static inline void
-handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
- struct sigaction *sa)
-{
- /* If we're not from a syscall, bail out */
- if (regs->tra < 0)
- return;
-
- /* check for system call restart.. */
- switch (regs->regs[0]) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- no_system_call_restart:
- regs->regs[0] = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(sa->sa_flags & SA_RESTART))
- goto no_system_call_restart;
- fallthrough;
- case -ERESTARTNOINTR:
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- break;
- }
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs, unsigned int save_r0)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
-
- /* Set up the stack frame */
- if (ksig->ka.sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(ksig, oldset, regs);
- else
- ret = setup_frame(ksig, oldset, regs);
-
- signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, unsigned int save_r0)
-{
- struct ksignal ksig;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return;
-
- if (get_signal(&ksig)) {
- handle_syscall_restart(save_r0, regs, &ksig.ka.sa);
-
- /* Whee! Actually deliver the signal. */
- handle_signal(&ksig, regs, save_r0);
- return;
- }
-
- /* Did we come from a system call? */
- if (regs->tra >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->regs[0] == -ERESTARTNOHAND ||
- regs->regs[0] == -ERESTARTSYS ||
- regs->regs[0] == -ERESTARTNOINTR) {
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- regs->regs[3] = __NR_restart_syscall;
- }
- }
-
- /*
- * If there's no signal to deliver, we just put the saved sigmask
- * back.
- */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags)
-{
- /* deal with pending signal delivery */
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
- do_signal(regs, save_r0);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME)
- resume_user_mode_work(regs);
-}
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
deleted file mode 100644
index 65924d9ec24598..00000000000000
--- a/arch/sh/kernel/smp.c
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/smp.c
- *
- * SMP support for the SuperH processors.
- *
- * Copyright (C) 2002 - 2010 Paul Mundt
- * Copyright (C) 2006 - 2007 Akio Idehara
- */
-#include <linux/err.h>
-#include <linux/cache.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/hotplug.h>
-#include <linux/atomic.h>
-#include <linux/clockchips.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
-int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */
-
-struct plat_smp_ops *mp_ops = NULL;
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-void register_smp_ops(struct plat_smp_ops *ops)
-{
- if (mp_ops)
- printk(KERN_WARNING "Overriding previously set SMP ops\n");
-
- mp_ops = ops;
-}
-
-static inline void smp_store_cpu_info(unsigned int cpu)
-{
- struct sh_cpuinfo *c = cpu_data + cpu;
-
- memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
-
- c->loops_per_jiffy = loops_per_jiffy;
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- unsigned int cpu = smp_processor_id();
-
- init_new_context(current, &init_mm);
- current_thread_info()->cpu = cpu;
- mp_ops->prepare_cpus(max_cpus);
-
-#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(cpu_possible_mask);
-#endif
-}
-
-void __init smp_prepare_boot_cpu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- __cpu_number_map[0] = cpu;
- __cpu_logical_map[0] = cpu;
-
- set_cpu_online(cpu, true);
- set_cpu_possible(cpu, true);
-
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void native_cpu_die(unsigned int cpu)
-{
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- smp_rmb();
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- if (system_state == SYSTEM_RUNNING)
- pr_info("CPU %u is now offline\n", cpu);
-
- return;
- }
-
- msleep(100);
- }
-
- pr_err("CPU %u didn't die...\n", cpu);
-}
-
-int native_cpu_disable(unsigned int cpu)
-{
- return cpu == 0 ? -EPERM : 0;
-}
-
-void play_dead_common(void)
-{
- idle_task_exit();
- irq_ctx_exit(raw_smp_processor_id());
- mb();
-
- __this_cpu_write(cpu_state, CPU_DEAD);
- local_irq_disable();
-}
-
-void native_play_dead(void)
-{
- play_dead_common();
-}
-
-int __cpu_disable(void)
-{
- unsigned int cpu = smp_processor_id();
- int ret;
-
- ret = mp_ops->cpu_disable(cpu);
- if (ret)
- return ret;
-
- /*
- * Take this CPU offline. Once we clear this, we can't return,
- * and we must not schedule until we're ready to give up the cpu.
- */
- set_cpu_online(cpu, false);
-
- /*
- * OK - migrate IRQs away from this CPU
- */
- migrate_irqs();
-
- /*
- * Flush user cache and TLB mappings, and then remove this CPU
- * from the vm mask set of all processes.
- */
- flush_cache_all();
-#ifdef CONFIG_MMU
- local_flush_tlb_all();
-#endif
-
- clear_tasks_mm_cpumask(cpu);
-
- return 0;
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int native_cpu_disable(unsigned int cpu)
-{
- return -ENOSYS;
-}
-
-void native_cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-
-void native_play_dead(void)
-{
- BUG();
-}
-#endif
-
-asmlinkage void start_secondary(void)
-{
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm = &init_mm;
-
- enable_mmu();
- mmgrab(mm);
- mmget(mm);
- current->active_mm = mm;
-#ifdef CONFIG_MMU
- enter_lazy_tlb(mm, current);
- local_flush_tlb_all();
-#endif
-
- per_cpu_trap_init();
-
- notify_cpu_starting(cpu);
-
- local_irq_enable();
-
- calibrate_delay();
-
- smp_store_cpu_info(cpu);
-
- set_cpu_online(cpu, true);
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-
- cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-}
-
-extern struct {
- unsigned long sp;
- unsigned long bss_start;
- unsigned long bss_end;
- void *start_kernel_fn;
- void *cpu_init_fn;
- void *thread_info;
-} stack_start;
-
-int __cpu_up(unsigned int cpu, struct task_struct *tsk)
-{
- unsigned long timeout;
-
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-
- /* Fill in data in head.S for secondary cpus */
- stack_start.sp = tsk->thread.sp;
- stack_start.thread_info = tsk->stack;
- stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
- stack_start.start_kernel_fn = start_secondary;
-
- flush_icache_range((unsigned long)&stack_start,
- (unsigned long)&stack_start + sizeof(stack_start));
- wmb();
-
- mp_ops->start_cpu(cpu, (unsigned long)_stext);
-
- timeout = jiffies + HZ;
- while (time_before(jiffies, timeout)) {
- if (cpu_online(cpu))
- break;
-
- udelay(10);
- barrier();
- }
-
- if (cpu_online(cpu))
- return 0;
-
- return -ENOENT;
-}
-
-void __init smp_cpus_done(unsigned int max_cpus)
-{
- unsigned long bogosum = 0;
- int cpu;
-
- for_each_online_cpu(cpu)
- bogosum += cpu_data[cpu].loops_per_jiffy;
-
- printk(KERN_INFO "SMP: Total of %d processors activated "
- "(%lu.%02lu BogoMIPS).\n", num_online_cpus(),
- bogosum / (500000/HZ),
- (bogosum / (5000/HZ)) % 100);
-}
-
-void smp_send_reschedule(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_RESCHEDULE);
-}
-
-void smp_send_stop(void)
-{
- smp_call_function(stop_this_cpu, 0, 0);
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION);
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
-}
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-void tick_broadcast(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_TIMER);
-}
-
-static void ipi_timer(void)
-{
- irq_enter();
- tick_receive_broadcast();
- irq_exit();
-}
-#endif
-
-void smp_message_recv(unsigned int msg)
-{
- switch (msg) {
- case SMP_MSG_FUNCTION:
- generic_smp_call_function_interrupt();
- break;
- case SMP_MSG_RESCHEDULE:
- scheduler_ipi();
- break;
- case SMP_MSG_FUNCTION_SINGLE:
- generic_smp_call_function_single_interrupt();
- break;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- case SMP_MSG_TIMER:
- ipi_timer();
- break;
-#endif
- default:
- printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
- smp_processor_id(), __func__, msg);
- break;
- }
-}
-
-/* Not really SMP stuff ... */
-int setup_profiling_timer(unsigned int multiplier)
-{
- return 0;
-}
-
-#ifdef CONFIG_MMU
-
-static void flush_tlb_all_ipi(void *info)
-{
- local_flush_tlb_all();
-}
-
-void flush_tlb_all(void)
-{
- on_each_cpu(flush_tlb_all_ipi, 0, 1);
-}
-
-static void flush_tlb_mm_ipi(void *mm)
-{
- local_flush_tlb_mm((struct mm_struct *)mm);
-}
-
-/*
- * The following tlb flush calls are invoked when old translations are
- * being torn down, or pte attributes are changing. For single threaded
- * address spaces, a new context is obtained on the current cpu, and tlb
- * context on other cpus are invalidated to force a new context allocation
- * at switch_mm time, should the mm ever be used on other cpus. For
- * multithreaded address spaces, intercpu interrupts have to be sent.
- * Another case where intercpu interrupts are required is when the target
- * mm might be active on another cpu (eg debuggers doing the flushes on
- * behalf of debugees, kswapd stealing pages from another process etc).
- * Kanoj 07/00.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
- preempt_disable();
-
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_mm(mm);
-
- preempt_enable();
-}
-
-struct flush_tlb_data {
- struct vm_area_struct *vma;
- unsigned long addr1;
- unsigned long addr2;
-};
-
-static void flush_tlb_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
-
- preempt_disable();
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = start;
- fd.addr2 = end;
- smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_range(vma, start, end);
- preempt_enable();
-}
-
-static void flush_tlb_kernel_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = start;
- fd.addr2 = end;
- on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
-}
-
-static void flush_tlb_page_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_page(fd->vma, fd->addr1);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- preempt_disable();
- if ((atomic_read(&vma->vm_mm->mm_users) != 1) ||
- (current->mm != vma->vm_mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = page;
- smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, vma->vm_mm) = 0;
- }
- local_flush_tlb_page(vma, page);
- preempt_enable();
-}
-
-static void flush_tlb_one_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
- local_flush_tlb_one(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_one(unsigned long asid, unsigned long vaddr)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = asid;
- fd.addr2 = vaddr;
-
- smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
- local_flush_tlb_one(asid, vaddr);
-}
-
-#endif
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
deleted file mode 100644
index daf0b53ee066fa..00000000000000
--- a/arch/sh/kernel/stacktrace.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/stacktrace.c
- *
- * Stack trace management functions
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- */
-static void save_stack_address(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = data;
-
- if (!reliable)
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops = {
- .address = save_stack_address,
-};
-
-void save_stack_trace(struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)current_stack_pointer;
-
- unwind_stack(current, NULL, sp, &save_stack_ops, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-
-static void
-save_stack_address_nosched(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = (struct stack_trace *)data;
-
- if (!reliable)
- return;
-
- if (in_sched_functions(addr))
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops_nosched = {
- .address = save_stack_address_nosched,
-};
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)tsk->thread.sp;
-
- unwind_stack(current, NULL, sp, &save_stack_ops_nosched, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c
deleted file mode 100644
index 0b772d6d714fed..00000000000000
--- a/arch/sh/kernel/swsusp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * swsusp.c - SuperH hibernation support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <asm/fpu.h>
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
- return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
- init_fpu(current);
-}
-
-void restore_processor_state(void)
-{
- local_flush_tlb_all();
-}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
deleted file mode 100644
index a5a7b33ed81ae9..00000000000000
--- a/arch/sh/kernel/sys_sh.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/sys_sh.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/SuperH
- * platform.
- *
- * Taken from i386 version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/syscalls.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/cacheflush.h>
-#include <asm/cachectl.h>
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off)
-{
- if (off & ~PAGE_MASK)
- return -EINVAL;
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- /*
- * The shift for mmap2 is constant, regardless of PAGE_SIZE
- * setting.
- */
- if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
- return -EINVAL;
-
- pgoff >>= PAGE_SHIFT - 12;
-
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
-}
-
-/* sys_cacheflush -- flush (part of) the processor cache. */
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
-{
- struct vm_area_struct *vma;
-
- if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
- return -EINVAL;
-
- /*
- * Verify that the specified address region actually belongs
- * to this process.
- */
- if (addr + len < addr)
- return -EFAULT;
-
- mmap_read_lock(current->mm);
- vma = find_vma (current->mm, addr);
- if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
-
- switch (op & CACHEFLUSH_D_PURGE) {
- case CACHEFLUSH_D_INVAL:
- __flush_invalidate_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_WB:
- __flush_wback_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_PURGE:
- __flush_purge_region((void *)addr, len);
- break;
- }
-
- if (op & CACHEFLUSH_I)
- flush_icache_range(addr, addr+len);
-
- mmap_read_unlock(current->mm);
- return 0;
-}
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
deleted file mode 100644
index 9dca568509a5e5..00000000000000
--- a/arch/sh/kernel/sys_sh32.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/syscalls.h>
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_sh_pipe(void)
-{
- int fd[2];
- int error;
-
- error = do_pipe_flags(fd, 0);
- if (!error) {
- current_pt_regs()->regs[1] = fd[1];
- return fd[0];
- }
- return error;
-}
-
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pread64(fd, buf, count, pos);
-}
-
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pwrite64(fd, buf, count, pos);
-}
-
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice)
-{
-#ifdef __LITTLE_ENDIAN__
- return ksys_fadvise64_64(fd, (u64)offset1 << 32 | offset0,
- (u64)len1 << 32 | len0, advice);
-#else
- return ksys_fadvise64_64(fd, (u64)offset0 << 32 | offset1,
- (u64)len0 << 32 | len1, advice);
-#endif
-}
diff --git a/arch/sh/kernel/syscalls/Makefile b/arch/sh/kernel/syscalls/Makefile
deleted file mode 100644
index b265e4bc16c2e0..00000000000000
--- a/arch/sh/kernel/syscalls/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-kapi := arch/$(SRCARCH)/include/generated/asm
-uapi := arch/$(SRCARCH)/include/generated/uapi/asm
-
-$(shell mkdir -p $(uapi) $(kapi))
-
-syscall := $(src)/syscall.tbl
-syshdr := $(srctree)/scripts/syscallhdr.sh
-systbl := $(srctree)/scripts/syscalltbl.sh
-
-quiet_cmd_syshdr = SYSHDR $@
- cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
-
-quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
-
-$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
- $(call if_changed,syshdr)
-
-$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-uapisyshdr-y += unistd_32.h
-kapisyshdr-y += syscall_table.h
-
-uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
-kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
-targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
-
-PHONY += all
-all: $(uapisyshdr-y) $(kapisyshdr-y)
- @:
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
deleted file mode 100644
index 2de85c977f54f9..00000000000000
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ /dev/null
@@ -1,455 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
-#
-# system call numbers and entry vectors for sh
-#
-# The format is:
-# <number> <abi> <name> <entry point>
-#
-# The <abi> is always "common" for this file
-#
-0 common restart_syscall sys_restart_syscall
-1 common exit sys_exit
-2 common fork sys_fork
-3 common read sys_read
-4 common write sys_write
-5 common open sys_open
-6 common close sys_close
-7 common waitpid sys_waitpid
-8 common creat sys_creat
-9 common link sys_link
-10 common unlink sys_unlink
-11 common execve sys_execve
-12 common chdir sys_chdir
-13 common time sys_time32
-14 common mknod sys_mknod
-15 common chmod sys_chmod
-16 common lchown sys_lchown16
-# 17 was break
-18 common oldstat sys_stat
-19 common lseek sys_lseek
-20 common getpid sys_getpid
-21 common mount sys_mount
-22 common umount sys_oldumount
-23 common setuid sys_setuid16
-24 common getuid sys_getuid16
-25 common stime sys_stime32
-26 common ptrace sys_ptrace
-27 common alarm sys_alarm
-28 common oldfstat sys_fstat
-29 common pause sys_pause
-30 common utime sys_utime32
-# 31 was stty
-# 32 was gtty
-33 common access sys_access
-34 common nice sys_nice
-# 35 was ftime
-36 common sync sys_sync
-37 common kill sys_kill
-38 common rename sys_rename
-39 common mkdir sys_mkdir
-40 common rmdir sys_rmdir
-41 common dup sys_dup
-42 common pipe sys_sh_pipe
-43 common times sys_times
-# 44 was prof
-45 common brk sys_brk
-46 common setgid sys_setgid16
-47 common getgid sys_getgid16
-48 common signal sys_signal
-49 common geteuid sys_geteuid16
-50 common getegid sys_getegid16
-51 common acct sys_acct
-52 common umount2 sys_umount
-# 53 was lock
-54 common ioctl sys_ioctl
-55 common fcntl sys_fcntl
-# 56 was mpx
-57 common setpgid sys_setpgid
-# 58 was ulimit
-# 59 was olduname
-60 common umask sys_umask
-61 common chroot sys_chroot
-62 common ustat sys_ustat
-63 common dup2 sys_dup2
-64 common getppid sys_getppid
-65 common getpgrp sys_getpgrp
-66 common setsid sys_setsid
-67 common sigaction sys_sigaction
-68 common sgetmask sys_sgetmask
-69 common ssetmask sys_ssetmask
-70 common setreuid sys_setreuid16
-71 common setregid sys_setregid16
-72 common sigsuspend sys_sigsuspend
-73 common sigpending sys_sigpending
-74 common sethostname sys_sethostname
-75 common setrlimit sys_setrlimit
-76 common getrlimit sys_old_getrlimit
-77 common getrusage sys_getrusage
-78 common gettimeofday sys_gettimeofday
-79 common settimeofday sys_settimeofday
-80 common getgroups sys_getgroups16
-81 common setgroups sys_setgroups16
-# 82 was select
-83 common symlink sys_symlink
-84 common oldlstat sys_lstat
-85 common readlink sys_readlink
-86 common uselib sys_uselib
-87 common swapon sys_swapon
-88 common reboot sys_reboot
-89 common readdir sys_old_readdir
-90 common mmap old_mmap
-91 common munmap sys_munmap
-92 common truncate sys_truncate
-93 common ftruncate sys_ftruncate
-94 common fchmod sys_fchmod
-95 common fchown sys_fchown16
-96 common getpriority sys_getpriority
-97 common setpriority sys_setpriority
-# 98 was profil
-99 common statfs sys_statfs
-100 common fstatfs sys_fstatfs
-# 101 was ioperm
-102 common socketcall sys_socketcall
-103 common syslog sys_syslog
-104 common setitimer sys_setitimer
-105 common getitimer sys_getitimer
-106 common stat sys_newstat
-107 common lstat sys_newlstat
-108 common fstat sys_newfstat
-109 common olduname sys_uname
-# 110 was iopl
-111 common vhangup sys_vhangup
-# 112 was idle
-# 113 was vm86old
-114 common wait4 sys_wait4
-115 common swapoff sys_swapoff
-116 common sysinfo sys_sysinfo
-117 common ipc sys_ipc
-118 common fsync sys_fsync
-119 common sigreturn sys_sigreturn
-120 common clone sys_clone
-121 common setdomainname sys_setdomainname
-122 common uname sys_newuname
-123 common cacheflush sys_cacheflush
-124 common adjtimex sys_adjtimex_time32
-125 common mprotect sys_mprotect
-126 common sigprocmask sys_sigprocmask
-# 127 was create_module
-128 common init_module sys_init_module
-129 common delete_module sys_delete_module
-# 130 was get_kernel_syms
-131 common quotactl sys_quotactl
-132 common getpgid sys_getpgid
-133 common fchdir sys_fchdir
-134 common bdflush sys_ni_syscall
-135 common sysfs sys_sysfs
-136 common personality sys_personality
-# 137 was afs_syscall
-138 common setfsuid sys_setfsuid16
-139 common setfsgid sys_setfsgid16
-140 common _llseek sys_llseek
-141 common getdents sys_getdents
-142 common _newselect sys_select
-143 common flock sys_flock
-144 common msync sys_msync
-145 common readv sys_readv
-146 common writev sys_writev
-147 common getsid sys_getsid
-148 common fdatasync sys_fdatasync
-149 common _sysctl sys_ni_syscall
-150 common mlock sys_mlock
-151 common munlock sys_munlock
-152 common mlockall sys_mlockall
-153 common munlockall sys_munlockall
-154 common sched_setparam sys_sched_setparam
-155 common sched_getparam sys_sched_getparam
-156 common sched_setscheduler sys_sched_setscheduler
-157 common sched_getscheduler sys_sched_getscheduler
-158 common sched_yield sys_sched_yield
-159 common sched_get_priority_max sys_sched_get_priority_max
-160 common sched_get_priority_min sys_sched_get_priority_min
-161 common sched_rr_get_interval sys_sched_rr_get_interval_time32
-162 common nanosleep sys_nanosleep_time32
-163 common mremap sys_mremap
-164 common setresuid sys_setresuid16
-165 common getresuid sys_getresuid16
-# 166 was vm86
-# 167 was query_module
-168 common poll sys_poll
-169 common nfsservctl sys_ni_syscall
-170 common setresgid sys_setresgid16
-171 common getresgid sys_getresgid16
-172 common prctl sys_prctl
-173 common rt_sigreturn sys_rt_sigreturn
-174 common rt_sigaction sys_rt_sigaction
-175 common rt_sigprocmask sys_rt_sigprocmask
-176 common rt_sigpending sys_rt_sigpending
-177 common rt_sigtimedwait sys_rt_sigtimedwait_time32
-178 common rt_sigqueueinfo sys_rt_sigqueueinfo
-179 common rt_sigsuspend sys_rt_sigsuspend
-180 common pread64 sys_pread_wrapper
-181 common pwrite64 sys_pwrite_wrapper
-182 common chown sys_chown16
-183 common getcwd sys_getcwd
-184 common capget sys_capget
-185 common capset sys_capset
-186 common sigaltstack sys_sigaltstack
-187 common sendfile sys_sendfile
-# 188 is reserved for getpmsg
-# 189 is reserved for putpmsg
-190 common vfork sys_vfork
-191 common ugetrlimit sys_getrlimit
-192 common mmap2 sys_mmap2
-193 common truncate64 sys_truncate64
-194 common ftruncate64 sys_ftruncate64
-195 common stat64 sys_stat64
-196 common lstat64 sys_lstat64
-197 common fstat64 sys_fstat64
-198 common lchown32 sys_lchown
-199 common getuid32 sys_getuid
-200 common getgid32 sys_getgid
-201 common geteuid32 sys_geteuid
-202 common getegid32 sys_getegid
-203 common setreuid32 sys_setreuid
-204 common setregid32 sys_setregid
-205 common getgroups32 sys_getgroups
-206 common setgroups32 sys_setgroups
-207 common fchown32 sys_fchown
-208 common setresuid32 sys_setresuid
-209 common getresuid32 sys_getresuid
-210 common setresgid32 sys_setresgid
-211 common getresgid32 sys_getresgid
-212 common chown32 sys_chown
-213 common setuid32 sys_setuid
-214 common setgid32 sys_setgid
-215 common setfsuid32 sys_setfsuid
-216 common setfsgid32 sys_setfsgid
-217 common pivot_root sys_pivot_root
-218 common mincore sys_mincore
-219 common madvise sys_madvise
-220 common getdents64 sys_getdents64
-221 common fcntl64 sys_fcntl64
-# 222 is reserved for tux
-# 223 is unused
-224 common gettid sys_gettid
-225 common readahead sys_readahead
-226 common setxattr sys_setxattr
-227 common lsetxattr sys_lsetxattr
-228 common fsetxattr sys_fsetxattr
-229 common getxattr sys_getxattr
-230 common lgetxattr sys_lgetxattr
-231 common fgetxattr sys_fgetxattr
-232 common listxattr sys_listxattr
-233 common llistxattr sys_llistxattr
-234 common flistxattr sys_flistxattr
-235 common removexattr sys_removexattr
-236 common lremovexattr sys_lremovexattr
-237 common fremovexattr sys_fremovexattr
-238 common tkill sys_tkill
-239 common sendfile64 sys_sendfile64
-240 common futex sys_futex_time32
-241 common sched_setaffinity sys_sched_setaffinity
-242 common sched_getaffinity sys_sched_getaffinity
-# 243 is reserved for set_thread_area
-# 244 is reserved for get_thread_area
-245 common io_setup sys_io_setup
-246 common io_destroy sys_io_destroy
-247 common io_getevents sys_io_getevents_time32
-248 common io_submit sys_io_submit
-249 common io_cancel sys_io_cancel
-250 common fadvise64 sys_fadvise64
-# 251 is unused
-252 common exit_group sys_exit_group
-253 common lookup_dcookie sys_lookup_dcookie
-254 common epoll_create sys_epoll_create
-255 common epoll_ctl sys_epoll_ctl
-256 common epoll_wait sys_epoll_wait
-257 common remap_file_pages sys_remap_file_pages
-258 common set_tid_address sys_set_tid_address
-259 common timer_create sys_timer_create
-260 common timer_settime sys_timer_settime32
-261 common timer_gettime sys_timer_gettime32
-262 common timer_getoverrun sys_timer_getoverrun
-263 common timer_delete sys_timer_delete
-264 common clock_settime sys_clock_settime32
-265 common clock_gettime sys_clock_gettime32
-266 common clock_getres sys_clock_getres_time32
-267 common clock_nanosleep sys_clock_nanosleep_time32
-268 common statfs64 sys_statfs64
-269 common fstatfs64 sys_fstatfs64
-270 common tgkill sys_tgkill
-271 common utimes sys_utimes_time32
-272 common fadvise64_64 sys_fadvise64_64_wrapper
-# 273 is reserved for vserver
-274 common mbind sys_mbind
-275 common get_mempolicy sys_get_mempolicy
-276 common set_mempolicy sys_set_mempolicy
-277 common mq_open sys_mq_open
-278 common mq_unlink sys_mq_unlink
-279 common mq_timedsend sys_mq_timedsend_time32
-280 common mq_timedreceive sys_mq_timedreceive_time32
-281 common mq_notify sys_mq_notify
-282 common mq_getsetattr sys_mq_getsetattr
-283 common kexec_load sys_kexec_load
-284 common waitid sys_waitid
-285 common add_key sys_add_key
-286 common request_key sys_request_key
-287 common keyctl sys_keyctl
-288 common ioprio_set sys_ioprio_set
-289 common ioprio_get sys_ioprio_get
-290 common inotify_init sys_inotify_init
-291 common inotify_add_watch sys_inotify_add_watch
-292 common inotify_rm_watch sys_inotify_rm_watch
-# 293 is unused
-294 common migrate_pages sys_migrate_pages
-295 common openat sys_openat
-296 common mkdirat sys_mkdirat
-297 common mknodat sys_mknodat
-298 common fchownat sys_fchownat
-299 common futimesat sys_futimesat_time32
-300 common fstatat64 sys_fstatat64
-301 common unlinkat sys_unlinkat
-302 common renameat sys_renameat
-303 common linkat sys_linkat
-304 common symlinkat sys_symlinkat
-305 common readlinkat sys_readlinkat
-306 common fchmodat sys_fchmodat
-307 common faccessat sys_faccessat
-308 common pselect6 sys_pselect6_time32
-309 common ppoll sys_ppoll_time32
-310 common unshare sys_unshare
-311 common set_robust_list sys_set_robust_list
-312 common get_robust_list sys_get_robust_list
-313 common splice sys_splice
-314 common sync_file_range sys_sync_file_range
-315 common tee sys_tee
-316 common vmsplice sys_vmsplice
-317 common move_pages sys_move_pages
-318 common getcpu sys_getcpu
-319 common epoll_pwait sys_epoll_pwait
-320 common utimensat sys_utimensat_time32
-321 common signalfd sys_signalfd
-322 common timerfd_create sys_timerfd_create
-323 common eventfd sys_eventfd
-324 common fallocate sys_fallocate
-325 common timerfd_settime sys_timerfd_settime32
-326 common timerfd_gettime sys_timerfd_gettime32
-327 common signalfd4 sys_signalfd4
-328 common eventfd2 sys_eventfd2
-329 common epoll_create1 sys_epoll_create1
-330 common dup3 sys_dup3
-331 common pipe2 sys_pipe2
-332 common inotify_init1 sys_inotify_init1
-333 common preadv sys_preadv
-334 common pwritev sys_pwritev
-335 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
-336 common perf_event_open sys_perf_event_open
-337 common fanotify_init sys_fanotify_init
-338 common fanotify_mark sys_fanotify_mark
-339 common prlimit64 sys_prlimit64
-340 common socket sys_socket
-341 common bind sys_bind
-342 common connect sys_connect
-343 common listen sys_listen
-344 common accept sys_accept
-345 common getsockname sys_getsockname
-346 common getpeername sys_getpeername
-347 common socketpair sys_socketpair
-348 common send sys_send
-349 common sendto sys_sendto
-350 common recv sys_recv
-351 common recvfrom sys_recvfrom
-352 common shutdown sys_shutdown
-353 common setsockopt sys_setsockopt
-354 common getsockopt sys_getsockopt
-355 common sendmsg sys_sendmsg
-356 common recvmsg sys_recvmsg
-357 common recvmmsg sys_recvmmsg_time32
-358 common accept4 sys_accept4
-359 common name_to_handle_at sys_name_to_handle_at
-360 common open_by_handle_at sys_open_by_handle_at
-361 common clock_adjtime sys_clock_adjtime32
-362 common syncfs sys_syncfs
-363 common sendmmsg sys_sendmmsg
-364 common setns sys_setns
-365 common process_vm_readv sys_process_vm_readv
-366 common process_vm_writev sys_process_vm_writev
-367 common kcmp sys_kcmp
-368 common finit_module sys_finit_module
-369 common sched_getattr sys_sched_getattr
-370 common sched_setattr sys_sched_setattr
-371 common renameat2 sys_renameat2
-372 common seccomp sys_seccomp
-373 common getrandom sys_getrandom
-374 common memfd_create sys_memfd_create
-375 common bpf sys_bpf
-376 common execveat sys_execveat
-377 common userfaultfd sys_userfaultfd
-378 common membarrier sys_membarrier
-379 common mlock2 sys_mlock2
-380 common copy_file_range sys_copy_file_range
-381 common preadv2 sys_preadv2
-382 common pwritev2 sys_pwritev2
-383 common statx sys_statx
-384 common pkey_mprotect sys_pkey_mprotect
-385 common pkey_alloc sys_pkey_alloc
-386 common pkey_free sys_pkey_free
-387 common rseq sys_rseq
-# room for arch specific syscalls
-393 common semget sys_semget
-394 common semctl sys_semctl
-395 common shmget sys_shmget
-396 common shmctl sys_shmctl
-397 common shmat sys_shmat
-398 common shmdt sys_shmdt
-399 common msgget sys_msgget
-400 common msgsnd sys_msgsnd
-401 common msgrcv sys_msgrcv
-402 common msgctl sys_msgctl
-403 common clock_gettime64 sys_clock_gettime
-404 common clock_settime64 sys_clock_settime
-405 common clock_adjtime64 sys_clock_adjtime
-406 common clock_getres_time64 sys_clock_getres
-407 common clock_nanosleep_time64 sys_clock_nanosleep
-408 common timer_gettime64 sys_timer_gettime
-409 common timer_settime64 sys_timer_settime
-410 common timerfd_gettime64 sys_timerfd_gettime
-411 common timerfd_settime64 sys_timerfd_settime
-412 common utimensat_time64 sys_utimensat
-413 common pselect6_time64 sys_pselect6
-414 common ppoll_time64 sys_ppoll
-416 common io_pgetevents_time64 sys_io_pgetevents
-417 common recvmmsg_time64 sys_recvmmsg
-418 common mq_timedsend_time64 sys_mq_timedsend
-419 common mq_timedreceive_time64 sys_mq_timedreceive
-420 common semtimedop_time64 sys_semtimedop
-421 common rt_sigtimedwait_time64 sys_rt_sigtimedwait
-422 common futex_time64 sys_futex
-423 common sched_rr_get_interval_time64 sys_sched_rr_get_interval
-424 common pidfd_send_signal sys_pidfd_send_signal
-425 common io_uring_setup sys_io_uring_setup
-426 common io_uring_enter sys_io_uring_enter
-427 common io_uring_register sys_io_uring_register
-428 common open_tree sys_open_tree
-429 common move_mount sys_move_mount
-430 common fsopen sys_fsopen
-431 common fsconfig sys_fsconfig
-432 common fsmount sys_fsmount
-433 common fspick sys_fspick
-434 common pidfd_open sys_pidfd_open
-# 435 reserved for clone3
-436 common close_range sys_close_range
-437 common openat2 sys_openat2
-438 common pidfd_getfd sys_pidfd_getfd
-439 common faccessat2 sys_faccessat2
-440 common process_madvise sys_process_madvise
-441 common epoll_pwait2 sys_epoll_pwait2
-442 common mount_setattr sys_mount_setattr
-443 common quotactl_fd sys_quotactl_fd
-444 common landlock_create_ruleset sys_landlock_create_ruleset
-445 common landlock_add_rule sys_landlock_add_rule
-446 common landlock_restrict_self sys_landlock_restrict_self
-# 447 reserved for memfd_secret
-448 common process_mrelease sys_process_mrelease
-449 common futex_waitv sys_futex_waitv
-450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
deleted file mode 100644
index bd1a9c54476732..00000000000000
--- a/arch/sh/kernel/syscalls_32.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/syscalls.S
- *
- * System call table for SuperH
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#define __SYSCALL(nr, entry) .long entry
- .data
-ENTRY(sys_call_table)
-#include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
deleted file mode 100644
index 821a09cbd6054f..00000000000000
--- a/arch/sh/kernel/time.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/smp.h>
-#include <linux/rtc.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-static void __init sh_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- sh_early_platform_driver_register_all("earlytimer");
- sh_early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init time_init(void)
-{
- timer_probe();
-
- clk_init();
-
- late_time_init = sh_late_time_init;
-}
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
deleted file mode 100644
index 2d2a7509b565ac..00000000000000
--- a/arch/sh/kernel/topology.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/topology.c
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/percpu.h>
-#include <linux/topology.h>
-#include <linux/node.h>
-#include <linux/nodemask.h>
-#include <linux/export.h>
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-cpumask_t cpu_core_map[NR_CPUS];
-EXPORT_SYMBOL(cpu_core_map);
-
-static cpumask_t cpu_coregroup_map(int cpu)
-{
- /*
- * Presently all SH-X3 SMP cores are multi-cores, so just keep it
- * simple until we have a method for determining topology..
- */
- return *cpu_possible_mask;
-}
-
-const struct cpumask *cpu_coregroup_mask(int cpu)
-{
- return &cpu_core_map[cpu];
-}
-
-int arch_update_cpu_topology(void)
-{
- unsigned int cpu;
-
- for_each_possible_cpu(cpu)
- cpu_core_map[cpu] = cpu_coregroup_map(cpu);
-
- return 0;
-}
-
-static int __init topology_init(void)
-{
- int i, ret;
-
- for_each_present_cpu(i) {
- struct cpu *c = &per_cpu(cpu_devices, i);
-
- c->hotpluggable = 1;
-
- ret = register_cpu(c, i);
- if (unlikely(ret))
- printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
- __func__, i, ret);
- }
-
-#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
- /*
- * In the UP case, make sure the CPU association is still
- * registered under each node. Without this, sysfs fails
- * to make the connection between nodes other than node0
- * and cpu0.
- */
- for_each_online_node(i)
- if (i != numa_node_id())
- register_cpu_under_node(raw_smp_processor_id(), i);
-#endif
-
- return 0;
-}
-subsys_initcall(topology_init);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
deleted file mode 100644
index 01884054aeb2bd..00000000000000
--- a/arch/sh/kernel/traps.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/kdebug.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-#include <linux/kernel.h>
-#include <linux/kexec.h>
-#include <linux/sched/signal.h>
-
-#include <linux/extable.h>
-#include <linux/module.h> /* print_modules */
-#include <asm/unwinder.h>
-#include <asm/traps.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-void __noreturn die(const char *str, struct pt_regs *regs, long err)
-{
- static int die_counter;
-
- oops_enter();
-
- spin_lock_irq(&die_lock);
- console_verbose();
- bust_spinlocks(1);
-
- printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- print_modules();
- show_regs(regs);
-
- printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
- task_pid_nr(current), task_stack_page(current) + 1);
-
- if (!user_mode(regs) || in_interrupt())
- dump_mem("Stack: ", KERN_DEFAULT, regs->regs[15],
- THREAD_SIZE + (unsigned long)task_stack_page(current));
-
- notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
-
- bust_spinlocks(0);
- add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- spin_unlock_irq(&die_lock);
- oops_exit();
-
- if (kexec_should_crash(current))
- crash_kexec(regs);
-
- if (in_interrupt())
- panic("Fatal exception in interrupt");
-
- if (panic_on_oops)
- panic("Fatal exception");
-
- make_task_dead(SIGSEGV);
-}
-
-void die_if_kernel(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs))
- die(str, regs, err);
-}
-
-/*
- * try and fix up kernelspace address errors
- * - userspace errors just cause EFAULT to be returned, resulting in SEGV
- * - kernel/userspace interfaces cause a jump to an appropriate handler
- * - other kernel errors are bad
- */
-void die_if_no_fixup(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs)) {
- const struct exception_table_entry *fixup;
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return;
- }
-
- die(str, regs, err);
- }
-}
-
-#ifdef CONFIG_GENERIC_BUG
-static void handle_BUG(struct pt_regs *regs)
-{
- const struct bug_entry *bug;
- unsigned long bugaddr = regs->pc;
- enum bug_trap_type tt;
-
- if (!is_valid_bugaddr(bugaddr))
- goto invalid;
-
- bug = find_bug(bugaddr);
-
- /* Switch unwinders when unwind_stack() is called */
- if (bug->flags & BUGFLAG_UNWINDER)
- unwinder_faulted = 1;
-
- tt = report_bug(bugaddr, regs);
- if (tt == BUG_TRAP_TYPE_WARN) {
- regs->pc += instruction_size(bugaddr);
- return;
- }
-
-invalid:
- die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
- insn_size_t opcode;
-
- if (addr < PAGE_OFFSET)
- return 0;
- if (get_kernel_nofault(opcode, (insn_size_t *)addr))
- return 0;
- if (opcode == TRAPA_BUG_OPCODE)
- return 1;
-
- return 0;
-}
-#endif
-
-/*
- * Generic trap handler.
- */
-BUILD_TRAP_HANDLER(debug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
- force_sig(SIGTRAP);
-}
-
-/*
- * Special handler for BUG() traps.
- */
-BUILD_TRAP_HANDLER(bug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
-#ifdef CONFIG_GENERIC_BUG
- if (__kernel_text_address(instruction_pointer(regs))) {
- insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
- if (insn == TRAPA_BUG_OPCODE)
- handle_BUG(regs);
- return;
- }
-#endif
-
- force_sig(SIGTRAP);
-}
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void arch_ftrace_nmi_enter(void);
-extern void arch_ftrace_nmi_exit(void);
-#else
-static inline void arch_ftrace_nmi_enter(void) { }
-static inline void arch_ftrace_nmi_exit(void) { }
-#endif
-
-BUILD_TRAP_HANDLER(nmi)
-{
- TRAP_HANDLER_DECL;
-
- arch_ftrace_nmi_enter();
-
- nmi_enter();
- this_cpu_inc(irq_stat.__nmi_count);
-
- switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
- case NOTIFY_OK:
- case NOTIFY_STOP:
- break;
- case NOTIFY_BAD:
- die("Fatal Non-Maskable Interrupt", regs, SIGINT);
- default:
- printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
- break;
- }
-
- nmi_exit();
-
- arch_ftrace_nmi_exit();
-}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
deleted file mode 100644
index 6cdda3a621a1e5..00000000000000
--- a/arch/sh/kernel/traps_32.c
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * 'traps.c' handles hardware traps and faults after we have saved some
- * state in 'entry.S'.
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf
- * Copyright (C) 2000 David Howells
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/kallsyms.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-#include <linux/debug_locks.h>
-#include <linux/kdebug.h>
-#include <linux/limits.h>
-#include <linux/sysfs.h>
-#include <linux/uaccess.h>
-#include <linux/perf_event.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/alignment.h>
-#include <asm/fpu.h>
-#include <asm/kprobes.h>
-#include <asm/traps.h>
-#include <asm/bl_bit.h>
-
-#ifdef CONFIG_CPU_SH2
-# define TRAP_RESERVED_INST 4
-# define TRAP_ILLEGAL_SLOT_INST 6
-# define TRAP_ADDRESS_ERROR 9
-# ifdef CONFIG_CPU_SH2A
-# define TRAP_UBC 12
-# define TRAP_FPU_ERROR 13
-# define TRAP_DIVZERO_ERROR 17
-# define TRAP_DIVOVF_ERROR 18
-# endif
-#else
-#define TRAP_RESERVED_INST 12
-#define TRAP_ILLEGAL_SLOT_INST 13
-#endif
-
-static inline void sign_extend(unsigned int count, unsigned char *dst)
-{
-#ifdef __LITTLE_ENDIAN__
- if ((count == 1) && dst[0] & 0x80) {
- dst[1] = 0xff;
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
- if ((count == 2) && dst[1] & 0x80) {
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
-#else
- if ((count == 1) && dst[3] & 0x80) {
- dst[2] = 0xff;
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
- if ((count == 2) && dst[2] & 0x80) {
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
-#endif
-}
-
-static struct mem_access user_mem_access = {
- copy_from_user,
- copy_to_user,
-};
-
-static unsigned long copy_from_kernel_wrapper(void *dst, const void __user *src,
- unsigned long cnt)
-{
- return copy_from_kernel_nofault(dst, (const void __force *)src, cnt);
-}
-
-static unsigned long copy_to_kernel_wrapper(void __user *dst, const void *src,
- unsigned long cnt)
-{
- return copy_to_kernel_nofault((void __force *)dst, src, cnt);
-}
-
-static struct mem_access kernel_mem_access = {
- copy_from_kernel_wrapper,
- copy_to_kernel_wrapper,
-};
-
-/*
- * handle an instruction that does an unaligned memory access by emulating the
- * desired behaviour
- * - note that PC _may not_ point to the faulting instruction
- * (if that instruction is in a branch delay slot)
- * - return 0 if emulation okay, -EFAULT on existential error
- */
-static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma)
-{
- int ret, index, count;
- unsigned long *rm, *rn;
- unsigned char *src, *dst;
- unsigned char __user *srcu, *dstu;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rn = ®s->regs[index];
-
- index = (instruction>>4)&15; /* 0x00F0 */
- rm = ®s->regs[index];
-
- count = 1<<(instruction&3);
-
- switch (count) {
- case 1: inc_unaligned_byte_access(); break;
- case 2: inc_unaligned_word_access(); break;
- case 4: inc_unaligned_dword_access(); break;
- case 8: inc_unaligned_multi_access(); break;
- }
-
- ret = -EFAULT;
- switch (instruction>>12) {
- case 0: /* mov.[bwl] to/from memory via r0+rn */
- if (instruction & 8) {
- /* from memory */
- srcu = (unsigned char __user *)*rm;
- srcu += regs->regs[0];
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
-
- sign_extend(count, dst);
- } else {
- /* to memory */
- src = (unsigned char *)rm;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- dstu = (unsigned char __user *)*rn;
- dstu += regs->regs[0];
-
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- }
- ret = 0;
- break;
-
- case 1: /* mov.l Rm,@(disp,Rn) */
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
- dstu += (instruction&0x000F)<<2;
-
- if (ma->to(dstu, src, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 2: /* mov.[bwl] to memory, possibly with pre-decrement */
- if (instruction & 4)
- *rn -= count;
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 5: /* mov.l @(disp,Rm),Rn */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 6: /* mov.[bwl] from memory, possibly with post-increment */
- srcu = (unsigned char __user *)*rm;
- if (instruction & 4)
- *rm += count;
- dst = (unsigned char*) rn;
- *(unsigned long*)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
- sign_extend(count, dst);
- ret = 0;
- break;
-
- case 8:
- switch ((instruction&0xFF00)>>8) {
- case 0x81: /* mov.w R0,@(disp,Rn) */
- src = (unsigned char *) ®s->regs[0];
-#if !defined(__LITTLE_ENDIAN__)
- src += 2;
-#endif
- dstu = (unsigned char __user *)*rm; /* called Rn in the spec */
- dstu += (instruction & 0x000F) << 1;
-
- if (ma->to(dstu, src, 2))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 0x85: /* mov.w @(disp,Rm),R0 */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 1;
- dst = (unsigned char *) ®s->regs[0];
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
- }
- break;
-
- case 9: /* mov.w @(disp,PC),Rn */
- srcu = (unsigned char __user *)regs->pc;
- srcu += 4;
- srcu += (instruction & 0x00FF) << 1;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
-
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
-
- case 0xd: /* mov.l @(disp,PC),Rn */
- srcu = (unsigned char __user *)(regs->pc & ~0x3);
- srcu += 4;
- srcu += (instruction & 0x00FF) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
- }
- return ret;
-
- fetch_fault:
- /* Argh. Address not only misaligned but also non-existent.
- * Raise an EFAULT and see if it's trapped
- */
- die_if_no_fixup("Fault in unaligned fixup", regs, 0);
- return -EFAULT;
-}
-
-/*
- * emulate the instruction in the delay slot
- * - fetches the instruction from PC+2
- */
-static inline int handle_delayslot(struct pt_regs *regs,
- insn_size_t old_instruction,
- struct mem_access *ma)
-{
- insn_size_t instruction;
- void __user *addr = (void __user *)(regs->pc +
- instruction_size(old_instruction));
-
- if (copy_from_user(&instruction, addr, sizeof(instruction))) {
- /* the instruction-fetch faulted */
- if (user_mode(regs))
- return -EFAULT;
-
- /* kernel */
- die("delay-slot-insn faulting in handle_unaligned_delayslot",
- regs, 0);
- }
-
- return handle_unaligned_ins(instruction, regs, ma);
-}
-
-/*
- * handle an instruction that does an unaligned memory access
- * - have to be careful of branch delay-slot instructions that fault
- * SH3:
- * - if the branch would be taken PC points to the branch
- * - if the branch would not be taken, PC points to delay-slot
- * SH4:
- * - PC always points to delayed branch
- * - return 0 if handled, -EFAULT if failed (may not return if in kernel)
- */
-
-/* Macros to determine offset from current PC for branch instructions */
-/* Explicit type coercion is used to force sign extension where needed */
-#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
-#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int expected,
- unsigned long address)
-{
- u_int rm;
- int ret, index;
-
- /*
- * XXX: We can't handle mixed 16/32-bit instructions yet
- */
- if (instruction_size(instruction) != 2)
- return -EINVAL;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rm = regs->regs[index];
-
- /*
- * Log the unexpected fixups, and then pass them on to perf.
- *
- * We intentionally don't report the expected cases to perf as
- * otherwise the trapped I/O case will skew the results too much
- * to be useful.
- */
- if (!expected) {
- unaligned_fixups_notify(current, instruction, regs);
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1,
- regs, address);
- }
-
- ret = -EFAULT;
- switch (instruction&0xF000) {
- case 0x0000:
- if (instruction==0x000B) {
- /* rts */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = regs->pr;
- }
- else if ((instruction&0x00FF)==0x0023) {
- /* braf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += rm + 4;
- }
- else if ((instruction&0x00FF)==0x0003) {
- /* bsrf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += rm + 4;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x1000: /* mov.l Rm,@(disp,Rn) */
- goto simple;
-
- case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */
- goto simple;
-
- case 0x4000:
- if ((instruction&0x00FF)==0x002B) {
- /* jmp @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = rm;
- }
- else if ((instruction&0x00FF)==0x000B) {
- /* jsr @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc = rm;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x5000: /* mov.l @(disp,Rm),Rn */
- goto simple;
-
- case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */
- goto simple;
-
- case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */
- switch (instruction&0x0F00) {
- case 0x0100: /* mov.w R0,@(disp,Rm) */
- goto simple;
- case 0x0500: /* mov.w @(disp,Rm),R0 */
- goto simple;
- case 0x0B00: /* bf lab - no delayslot*/
- ret = 0;
- break;
- case 0x0F00: /* bf/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) != 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- case 0x0900: /* bt lab - no delayslot */
- ret = 0;
- break;
- case 0x0D00: /* bt/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) == 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- }
- break;
-
- case 0x9000: /* mov.w @(disp,Rm),Rn */
- goto simple;
-
- case 0xA000: /* bra label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- break;
-
- case 0xB000: /* bsr label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- }
- break;
-
- case 0xD000: /* mov.l @(disp,Rm),Rn */
- goto simple;
- }
- return ret;
-
- /* handle non-delay-slot instruction */
- simple:
- ret = handle_unaligned_ins(instruction, regs, ma);
- if (ret==0)
- regs->pc += instruction_size(instruction);
- return ret;
-}
-
-/*
- * Handle various address error exceptions:
- * - instruction address error:
- * misaligned PC
- * PC >= 0x80000000 in user mode
- * - data address error (read and write)
- * misaligned data access
- * access to >= 0x80000000 is user mode
- * Unfortuntaly we can't distinguish between instruction address error
- * and data address errors caused by read accesses.
- */
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
- unsigned long error_code = 0;
- insn_size_t instruction;
- int tmp;
-
- /* Intentional ifdef */
-#ifdef CONFIG_CPU_HAS_SR_RB
- error_code = lookup_exception_vector();
-#endif
-
- if (user_mode(regs)) {
- int si_code = BUS_ADRERR;
- unsigned int user_action;
-
- local_irq_enable();
- inc_unaligned_user_access();
-
- if (copy_from_user(&instruction, (insn_size_t __user *)(regs->pc & ~1),
- sizeof(instruction))) {
- goto uspace_segv;
- }
-
- /* shout about userspace fixups */
- unaligned_fixups_notify(current, instruction, regs);
-
- user_action = unaligned_user_action();
- if (user_action & UM_FIXUP)
- goto fixup;
- if (user_action & UM_SIGNAL)
- goto uspace_segv;
- else {
- /* ignore */
- regs->pc += instruction_size(instruction);
- return;
- }
-
-fixup:
- /* bad PC is not something we can fix */
- if (regs->pc & 1) {
- si_code = BUS_ADRALN;
- goto uspace_segv;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &user_mem_access, 0,
- address);
-
- if (tmp == 0)
- return; /* sorted */
-uspace_segv:
- printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
- "access (PC %lx PR %lx)\n", current->comm, regs->pc,
- regs->pr);
-
- force_sig_fault(SIGBUS, si_code, (void __user *)address);
- } else {
- inc_unaligned_kernel_access();
-
- if (regs->pc & 1)
- die("unaligned program counter", regs, error_code);
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- /* Argh. Fault on the instruction itself.
- This should never happen non-SMP
- */
- die("insn faulting in do_address_error", regs, 0);
- }
-
- unaligned_fixups_notify(current, instruction, regs);
-
- handle_unaligned_access(instruction, regs, &kernel_mem_access,
- 0, address);
- }
-}
-
-#ifdef CONFIG_SH_DSP
-/*
- * SH-DSP support gerg@snapgear.com.
- */
-int is_dsp_inst(struct pt_regs *regs)
-{
- unsigned short inst = 0;
-
- /*
- * Safe guard if DSP mode is already enabled or we're lacking
- * the DSP altogether.
- */
- if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP))
- return 0;
-
- get_user(inst, ((unsigned short *) regs->pc));
-
- inst &= 0xf000;
-
- /* Check for any type of DSP or support instruction */
- if ((inst == 0xf000) || (inst == 0x4000))
- return 1;
-
- return 0;
-}
-#else
-#define is_dsp_inst(regs) (0)
-#endif /* CONFIG_SH_DSP */
-
-#ifdef CONFIG_CPU_SH2A
-asmlinkage void do_divide_error(unsigned long r4)
-{
- int code;
-
- switch (r4) {
- case TRAP_DIVZERO_ERROR:
- code = FPE_INTDIV;
- break;
- case TRAP_DIVOVF_ERROR:
- code = FPE_INTOVF;
- break;
- default:
- /* Let gcc know unhandled cases don't make it past here */
- return;
- }
- force_sig_fault(SIGFPE, code, NULL);
-}
-#endif
-
-asmlinkage void do_reserved_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long error_code;
-
-#ifdef CONFIG_SH_FPU_EMU
- unsigned short inst = 0;
- int err;
-
- get_user(inst, (unsigned short __user *)regs->pc);
-
- err = do_fpu_inst(inst, regs);
- if (!err) {
- regs->pc += instruction_size(inst);
- return;
- }
- /* not a FPU inst. */
-#endif
-
-#ifdef CONFIG_SH_DSP
- /* Check if it's a DSP instruction */
- if (is_dsp_inst(regs)) {
- /* Enable DSP mode, and restart instruction. */
- regs->sr |= SR_DSP;
- /* Save DSP mode */
- current->thread.dsp_status.status |= SR_DSP;
- return;
- }
-#endif
-
- error_code = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("reserved instruction", regs, error_code);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-static int emulate_branch(unsigned short inst, struct pt_regs *regs)
-{
- /*
- * bfs: 8fxx: PC+=d*2+4;
- * bts: 8dxx: PC+=d*2+4;
- * bra: axxx: PC+=D*2+4;
- * bsr: bxxx: PC+=D*2+4 after PR=PC+4;
- * braf:0x23: PC+=Rn*2+4;
- * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
- * jmp: 4x2b: PC=Rn;
- * jsr: 4x0b: PC=Rn after PR=PC+4;
- * rts: 000b: PC=PR;
- */
- if (((inst & 0xf000) == 0xb000) || /* bsr */
- ((inst & 0xf0ff) == 0x0003) || /* bsrf */
- ((inst & 0xf0ff) == 0x400b)) /* jsr */
- regs->pr = regs->pc + 4;
-
- if ((inst & 0xfd00) == 0x8d00) { /* bfs, bts */
- regs->pc += SH_PC_8BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xe000) == 0xa000) { /* bra, bsr */
- regs->pc += SH_PC_12BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x0003) { /* braf, bsrf */
- regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x400b) { /* jmp, jsr */
- regs->pc = regs->regs[(inst & 0x0f00) >> 8];
- return 0;
- }
-
- if ((inst & 0xffff) == 0x000b) { /* rts */
- regs->pc = regs->pr;
- return 0;
- }
-
- return 1;
-}
-#endif
-
-asmlinkage void do_illegal_slot_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long inst;
-
- if (kprobe_handle_illslot(regs->pc) == 0)
- return;
-
-#ifdef CONFIG_SH_FPU_EMU
- get_user(inst, (unsigned short __user *)regs->pc + 1);
- if (!do_fpu_inst(inst, regs)) {
- get_user(inst, (unsigned short __user *)regs->pc);
- if (!emulate_branch(inst, regs))
- return;
- /* fault in branch.*/
- }
- /* not a FPU inst. */
-#endif
-
- inst = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("illegal slot instruction", regs, inst);
-}
-
-asmlinkage void do_exception_error(void)
-{
- long ex;
-
- ex = lookup_exception_vector();
- die_if_kernel("exception", current_pt_regs(), ex);
-}
-
-void per_cpu_trap_init(void)
-{
- extern void *vbr_base;
-
- /* NOTE: The VBR value should be at P1
- (or P2, virtural "fixed" address space).
- It's definitely should not in physical address. */
-
- asm volatile("ldc %0, vbr"
- : /* no output */
- : "r" (&vbr_base)
- : "memory");
-
- /* disable exception blocking now when the vbr has been setup */
- clear_bl_bit();
-}
-
-void *set_exception_table_vec(unsigned int vec, void *handler)
-{
- extern void *exception_handling_table[];
- void *old_handler;
-
- old_handler = exception_handling_table[vec];
- exception_handling_table[vec] = handler;
- return old_handler;
-}
-
-void __init trap_init(void)
-{
- set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst);
- set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
- defined(CONFIG_SH_FPU_EMU)
- /*
- * For SH-4 lacking an FPU, treat floating point instructions as
- * reserved. They'll be handled in the math-emu case, or faulted on
- * otherwise.
- */
- set_exception_table_evt(0x800, do_reserved_inst);
- set_exception_table_evt(0x820, do_illegal_slot_inst);
-#elif defined(CONFIG_SH_FPU)
- set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
- set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
-#endif
-
-#ifdef CONFIG_CPU_SH2
- set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
-#endif
-#ifdef CONFIG_CPU_SH2A
- set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
- set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
-#ifdef CONFIG_SH_FPU
- set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
-#endif
-#endif
-
-#ifdef TRAP_UBC
- set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
-#endif
-}
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
deleted file mode 100644
index 7a54b72dd92377..00000000000000
--- a/arch/sh/kernel/unwinder.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based, in part, on kernel/time/clocksource.c.
- *
- * This file provides arbitration code for stack unwinders.
- *
- * Multiple stack unwinders can be available on a system, usually with
- * the most accurate unwinder being the currently active one.
- */
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <linux/atomic.h>
-
-/*
- * This is the most basic stack unwinder an architecture can
- * provide. For architectures without reliable frame pointers, e.g.
- * RISC CPUs, it can be implemented by looking through the stack for
- * addresses that lie within the kernel text section.
- *
- * Other CPUs, e.g. x86, can use their frame pointer register to
- * construct more accurate stack traces.
- */
-static struct list_head unwinder_list;
-static struct unwinder stack_reader = {
- .name = "stack-reader",
- .dump = stack_reader_dump,
- .rating = 50,
- .list = {
- .next = &unwinder_list,
- .prev = &unwinder_list,
- },
-};
-
-/*
- * "curr_unwinder" points to the stack unwinder currently in use. This
- * is the unwinder with the highest rating.
- *
- * "unwinder_list" is a linked-list of all available unwinders, sorted
- * by rating.
- *
- * All modifications of "curr_unwinder" and "unwinder_list" must be
- * performed whilst holding "unwinder_lock".
- */
-static struct unwinder *curr_unwinder = &stack_reader;
-
-static struct list_head unwinder_list = {
- .next = &stack_reader.list,
- .prev = &stack_reader.list,
-};
-
-static DEFINE_SPINLOCK(unwinder_lock);
-
-/**
- * select_unwinder - Select the best registered stack unwinder.
- *
- * Private function. Must hold unwinder_lock when called.
- *
- * Select the stack unwinder with the best rating. This is useful for
- * setting up curr_unwinder.
- */
-static struct unwinder *select_unwinder(void)
-{
- struct unwinder *best;
-
- if (list_empty(&unwinder_list))
- return NULL;
-
- best = list_entry(unwinder_list.next, struct unwinder, list);
- if (best == curr_unwinder)
- return NULL;
-
- return best;
-}
-
-/*
- * Enqueue the stack unwinder sorted by rating.
- */
-static int unwinder_enqueue(struct unwinder *ops)
-{
- struct list_head *tmp, *entry = &unwinder_list;
-
- list_for_each(tmp, &unwinder_list) {
- struct unwinder *o;
-
- o = list_entry(tmp, struct unwinder, list);
- if (o == ops)
- return -EBUSY;
- /* Keep track of the place, where to insert */
- if (o->rating >= ops->rating)
- entry = tmp;
- }
- list_add(&ops->list, entry);
-
- return 0;
-}
-
-/**
- * unwinder_register - Used to install new stack unwinder
- * @u: unwinder to be registered
- *
- * Install the new stack unwinder on the unwinder list, which is sorted
- * by rating.
- *
- * Returns -EBUSY if registration fails, zero otherwise.
- */
-int unwinder_register(struct unwinder *u)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&unwinder_lock, flags);
- ret = unwinder_enqueue(u);
- if (!ret)
- curr_unwinder = select_unwinder();
- spin_unlock_irqrestore(&unwinder_lock, flags);
-
- return ret;
-}
-
-int unwinder_faulted = 0;
-
-/*
- * Unwind the call stack and pass information to the stacktrace_ops
- * functions. Also handle the case where we need to switch to a new
- * stack dumper because the current one faulted unexpectedly.
- */
-void unwind_stack(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- unsigned long flags;
-
- /*
- * The problem with unwinders with high ratings is that they are
- * inherently more complicated than the simple ones with lower
- * ratings. We are therefore more likely to fault in the
- * complicated ones, e.g. hitting BUG()s. If we fault in the
- * code for the current stack unwinder we try to downgrade to
- * one with a lower rating.
- *
- * Hopefully this will give us a semi-reliable stacktrace so we
- * can diagnose why curr_unwinder->dump() faulted.
- */
- if (unwinder_faulted) {
- spin_lock_irqsave(&unwinder_lock, flags);
-
- /* Make sure no one beat us to changing the unwinder */
- if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
- list_del(&curr_unwinder->list);
- curr_unwinder = select_unwinder();
-
- unwinder_faulted = 0;
- }
-
- spin_unlock_irqrestore(&unwinder_lock, flags);
- }
-
- curr_unwinder->dump(task, regs, sp, ops, data);
-}
-EXPORT_SYMBOL_GPL(unwind_stack);
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
deleted file mode 100644
index 3161b9ccd2a570..00000000000000
--- a/arch/sh/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ld script to make SuperH Linux kernel
- * Written by Niibe Yutaka and Paul Mundt
- */
-OUTPUT_ARCH(sh)
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm/vmlinux.lds.h>
-
-#ifdef CONFIG_PMB
- #define MEMORY_OFFSET 0
-#else
- #define MEMORY_OFFSET __MEMORY_START
-#endif
-
-ENTRY(_start)
-SECTIONS
-{
- . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-
- _text = .; /* Text and read-only data */
-
- .empty_zero_page : AT(ADDR(.empty_zero_page)) {
- *(.empty_zero_page)
- } = 0
-
- .text : AT(ADDR(.text)) {
- HEAD_TEXT
- TEXT_TEXT
- SCHED_TEXT
- CPUIDLE_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- SOFTIRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } = 0x0009
-
- EXCEPTION_TABLE(16)
-
- _sdata = .;
- RO_DATA(PAGE_SIZE)
- RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
- _edata = .;
-
- DWARF_EH_FRAME
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- INIT_TEXT_SECTION(PAGE_SIZE)
- INIT_DATA_SECTION(16)
-
- . = ALIGN(4);
- .machvec.init : AT(ADDR(.machvec.init)) {
- __machvec_start = .;
- *(.machvec.init)
- __machvec_end = .;
- }
-
- PERCPU_SECTION(L1_CACHE_BYTES)
-
- /*
- * .exit.text is discarded at runtime, not link time, to deal with
- * references from __bug_table
- */
- .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
- .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
- BSS_SECTION(0, PAGE_SIZE, 4)
- _end = . ;
-
- STABS_DEBUG
- DWARF_DEBUG
- ELF_DETAILS
-
- DISCARDS
-}
diff --git a/arch/sh/kernel/vsyscall/.gitignore b/arch/sh/kernel/vsyscall/.gitignore
deleted file mode 100644
index 530a3031a88d79..00000000000000
--- a/arch/sh/kernel/vsyscall/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vsyscall.lds
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
deleted file mode 100644
index 6e86644480488f..00000000000000
--- a/arch/sh/kernel/vsyscall/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += vsyscall.o vsyscall-syscall.o vsyscall-syms.o
-
-$(obj)/vsyscall-syscall.o: \
- $(foreach F,trapa,$(obj)/vsyscall-$F.so)
-
-# Teach kbuild about targets
-targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note.o vsyscall.lds vsyscall-dummy.o
-
-# The DSO images are built using a special linker script
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall.lds += -P -C -Ush
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 -Wl,--hash-style=sysv
-
-SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
-
-$(obj)/vsyscall-trapa.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
- $(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-SYSCFLAGS_vsyscall-dummy.o = -r
-$(obj)/vsyscall-dummy.o: $(src)/vsyscall.lds \
- $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-LDFLAGS_vsyscall-syms.o := -r -R
-$(obj)/vsyscall-syms.o: $(obj)/vsyscall-dummy.o FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S
deleted file mode 100644
index bb350918bebd19..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-note.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
- * Here we can supply some information useful to userland.
- */
-
-#include <linux/uts.h>
-#include <linux/version.h>
-
-#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \
- .section name, flags; \
- .balign 4; \
- .long 1f - 0f; /* name length */ \
- .long 3f - 2f; /* data length */ \
- .long type; /* note type */ \
-0: .asciz vendor; /* vendor name */ \
-1: .balign 4; \
-2:
-
-#define ASM_ELF_NOTE_END \
-3: .balign 4; /* pad out section */ \
- .previous
-
- ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
- .long LINUX_VERSION_CODE
- ASM_ELF_NOTE_END
diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
deleted file mode 100644
index bece5fa7361830..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd.h>
-
- .text
- .balign 32
- .globl __kernel_sigreturn
- .type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_sigreturn
-.LEND_sigreturn:
- .size __kernel_sigreturn,.-.LSTART_sigreturn
-
- .balign 32
- .globl __kernel_rt_sigreturn
- .type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_rt_sigreturn
-.LEND_rt_sigreturn:
- .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE1:
- .ualong .LCIE1_end - .LCIE1_start
-.LCIE1_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zRS" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc, 0xf, 0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
-
- .align 2
-.LCIE1_end:
-
- .ualong .LFDE0_end-.LFDE0_start /* Length FDE0 */
-.LFDE0_start:
- .ualong .LFDE0_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_sigreturn-. /* PC-relative start address */
- .ualong .LEND_sigreturn-.LSTART_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE0_end:
-
- .ualong .LFDE1_end-.LFDE1_start /* Length FDE1 */
-.LFDE1_start:
- .ualong .LFDE1_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_rt_sigreturn-. /* PC-relative start address */
- .ualong .LEND_rt_sigreturn-.LSTART_rt_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE1_end:
-
- .previous
diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
deleted file mode 100644
index 2aeaa2ddee50eb..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-syscall.S
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/init.h>
-
-__INITDATA
-
- .globl vsyscall_trapa_start, vsyscall_trapa_end
-vsyscall_trapa_start:
- .incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
-vsyscall_trapa_end:
-
-__FINIT
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
deleted file mode 100644
index 854ea323570415..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .text
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- trapa #0x10
- nop
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE:
- .ualong .LCIE_end - .LCIE_start
-.LCIE_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc,0xf,0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
- .align 2
-.LCIE_end:
-
- .ualong .LFDE_end-.LFDE_start /* Length FDE */
-.LFDE_start:
- .ualong .LFDE_start-.LCIE /* CIE pointer */
- .ualong .LSTART_vsyscall-. /* PC-relative start address */
- .ualong .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE_end:
- .previous
-
-/* Get the common code for the sigreturn entry points */
-#include "vsyscall-sigreturn.S"
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
deleted file mode 100644
index 1bd85a6949c45d..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/vsyscall/vsyscall.c
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * vDSO randomization
- * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
- */
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/elf.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-
-/*
- * Should the kernel map a VDSO page into processes and pass its
- * address down to glibc upon exec()?
- */
-unsigned int __read_mostly vdso_enabled = 1;
-EXPORT_SYMBOL_GPL(vdso_enabled);
-
-static int __init vdso_setup(char *s)
-{
- vdso_enabled = simple_strtoul(s, NULL, 0);
- return 1;
-}
-__setup("vdso=", vdso_setup);
-
-/*
- * These symbols are defined by vsyscall.o to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vsyscall_trapa_start, vsyscall_trapa_end;
-static struct page *syscall_pages[1];
-
-int __init vsyscall_init(void)
-{
- void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
- syscall_pages[0] = virt_to_page(syscall_page);
-
- /*
- * XXX: Map this page to a fixmap entry if we get around
- * to adding the page to ELF core dumps
- */
-
- memcpy(syscall_page,
- &vsyscall_trapa_start,
- &vsyscall_trapa_end - &vsyscall_trapa_start);
-
- return 0;
-}
-
-/* Setup a VMA at program startup for the vsyscall page */
-int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
-{
- struct mm_struct *mm = current->mm;
- unsigned long addr;
- int ret;
-
- if (mmap_write_lock_killable(mm))
- return -EINTR;
-
- addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
- if (IS_ERR_VALUE(addr)) {
- ret = addr;
- goto up_fail;
- }
-
- ret = install_special_mapping(mm, addr, PAGE_SIZE,
- VM_READ | VM_EXEC |
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
- syscall_pages);
- if (unlikely(ret))
- goto up_fail;
-
- current->mm->context.vdso = (void *)addr;
-
-up_fail:
- mmap_write_unlock(mm);
- return ret;
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
- if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
- return "[vdso]";
-
- return NULL;
-}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
deleted file mode 100644
index e3582e03c0eb0b..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.lds.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
- * object prelinked to its virtual address, and with only one read-only
- * segment (that fits in one page). This script controls its layout.
- */
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-#else
-OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
-#endif
-OUTPUT_ARCH(sh)
-
-/* The ELF entry point can be used to set the AT_SYSINFO value. */
-ENTRY(__kernel_vsyscall);
-
-SECTIONS
-{
- . = SIZEOF_HEADERS;
-
- .hash : { *(.hash) } :text
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- /*
- * This linker script is used both with -r and with -shared.
- * For the layouts to match, we need to skip more than enough
- * space for the dynamic symbol table et al. If this amount
- * is insufficient, ld -shared will barf. Just increase it here.
- */
- . = 0x400;
-
- .text : { *(.text) } :text =0x90909090
- .note : { *(.note.*) } :text :note
- .eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : {
- KEEP (*(.eh_frame))
- LONG (0)
- } :text
- .dynamic : { *(.dynamic) } :text :dynamic
- .useless : {
- *(.got.plt) *(.got)
- *(.data .data.* .gnu.linkonce.d.*)
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- } :text
-}
-
-/*
- * Very old versions of ld do not recognize this name token; use the constant.
- */
-#define PT_GNU_EH_FRAME 0x6474e550
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
- text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
- dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
- note PT_NOTE FLAGS(4); /* PF_R */
- eh_frame_hdr PT_GNU_EH_FRAME;
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
- LINUX_2.6 {
- global:
- __kernel_vsyscall;
- __kernel_sigreturn;
- __kernel_rt_sigreturn;
-
- local: *;
- };
-}
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
deleted file mode 100644
index eb473d373ca43a..00000000000000
--- a/arch/sh/lib/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for SuperH-specific library files..
-#
-
-lib-y = delay.o memmove.o memchr.o \
- checksum.o strlen.o div64.o div64-generic.o
-
-# Extracted from libgcc
-obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
- ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
- udiv_qrnnd.o
-
-udivsi3-y := udivsi3_i4i-Os.o
-
-ifneq ($(CONFIG_CC_OPTIMIZE_FOR_SIZE),y)
-udivsi3-$(CONFIG_CPU_SH3) := udivsi3_i4i.o
-udivsi3-$(CONFIG_CPU_SH4) := udivsi3_i4i.o
-endif
-udivsi3-y += udivsi3.o
-
-obj-y += io.o
-
-memcpy-y := memcpy.o
-memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o
-
-memset-y := memset.o
-memset-$(CONFIG_CPU_SH4) := memset-sh4.o
-
-lib-$(CONFIG_MMU) += copy_page.o __clear_user.o
-lib-$(CONFIG_MCOUNT) += mcount.o
-lib-y += $(memcpy-y) $(memset-y) $(udivsi3-y)
diff --git a/arch/sh/lib/__clear_user.S b/arch/sh/lib/__clear_user.S
deleted file mode 100644
index 0978606907ed3c..00000000000000
--- a/arch/sh/lib/__clear_user.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * __clear_user_page, __clear_user, clear_page implementation of SuperH
- *
- * Copyright (C) 2001 Kaz Kojima
- * Copyright (C) 2001, 2002 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-ENTRY(__clear_user)
- !
- mov #0, r0
- mov #0xffffffe0, r1
- !
- ! r4..(r4+31)&~32 -------- not aligned [ Area 0 ]
- ! (r4+31)&~32..(r4+r5)&~32 -------- aligned [ Area 1 ]
- ! (r4+r5)&~32..r4+r5 -------- not aligned [ Area 2 ]
- !
- ! Clear area 0
- mov r4, r2
- !
- tst r1, r5 ! length < 32
- bt .Larea2 ! skip to remainder
- !
- add #31, r2
- and r1, r2
- cmp/eq r4, r2
- bt .Larea1
- mov r2, r3
- sub r4, r3
- mov r3, r7
- mov r4, r2
- !
-.L0: dt r3
-0: mov.b r0, @r2
- bf/s .L0
- add #1, r2
- !
- sub r7, r5
- mov r2, r4
-.Larea1:
- mov r4, r3
- add r5, r3
- and r1, r3
- cmp/hi r2, r3
- bf .Larea2
- !
- ! Clear area 1
-#if defined(CONFIG_CPU_SH4)
-1: movca.l r0, @r2
-#else
-1: mov.l r0, @r2
-#endif
- add #4, r2
-2: mov.l r0, @r2
- add #4, r2
-3: mov.l r0, @r2
- add #4, r2
-4: mov.l r0, @r2
- add #4, r2
-5: mov.l r0, @r2
- add #4, r2
-6: mov.l r0, @r2
- add #4, r2
-7: mov.l r0, @r2
- add #4, r2
-8: mov.l r0, @r2
- add #4, r2
- cmp/hi r2, r3
- bt/s 1b
- nop
- !
- ! Clear area 2
-.Larea2:
- mov r4, r3
- add r5, r3
- cmp/hs r3, r2
- bt/s .Ldone
- sub r2, r3
-.L2: dt r3
-9: mov.b r0, @r2
- bf/s .L2
- add #1, r2
- !
-.Ldone: rts
- mov #0, r0 ! return 0 as normal return
-
- ! return the number of bytes remained
-.Lbad_clear_user:
- mov r4, r0
- add r5, r0
- rts
- sub r2, r0
-
-.section __ex_table,"a"
- .align 2
- .long 0b, .Lbad_clear_user
- .long 1b, .Lbad_clear_user
- .long 2b, .Lbad_clear_user
- .long 3b, .Lbad_clear_user
- .long 4b, .Lbad_clear_user
- .long 5b, .Lbad_clear_user
- .long 6b, .Lbad_clear_user
- .long 7b, .Lbad_clear_user
- .long 8b, .Lbad_clear_user
- .long 9b, .Lbad_clear_user
-.previous
diff --git a/arch/sh/lib/ashiftrt.S b/arch/sh/lib/ashiftrt.S
deleted file mode 100644
index 0f7145e3c51ee2..00000000000000
--- a/arch/sh/lib/ashiftrt.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .global __ashiftrt_r4_0
- .global __ashiftrt_r4_1
- .global __ashiftrt_r4_2
- .global __ashiftrt_r4_3
- .global __ashiftrt_r4_4
- .global __ashiftrt_r4_5
- .global __ashiftrt_r4_6
- .global __ashiftrt_r4_7
- .global __ashiftrt_r4_8
- .global __ashiftrt_r4_9
- .global __ashiftrt_r4_10
- .global __ashiftrt_r4_11
- .global __ashiftrt_r4_12
- .global __ashiftrt_r4_13
- .global __ashiftrt_r4_14
- .global __ashiftrt_r4_15
- .global __ashiftrt_r4_16
- .global __ashiftrt_r4_17
- .global __ashiftrt_r4_18
- .global __ashiftrt_r4_19
- .global __ashiftrt_r4_20
- .global __ashiftrt_r4_21
- .global __ashiftrt_r4_22
- .global __ashiftrt_r4_23
- .global __ashiftrt_r4_24
- .global __ashiftrt_r4_25
- .global __ashiftrt_r4_26
- .global __ashiftrt_r4_27
- .global __ashiftrt_r4_28
- .global __ashiftrt_r4_29
- .global __ashiftrt_r4_30
- .global __ashiftrt_r4_31
- .global __ashiftrt_r4_32
-
- .align 1
-__ashiftrt_r4_32:
-__ashiftrt_r4_31:
- rotcl r4
- rts
- subc r4,r4
-__ashiftrt_r4_30:
- shar r4
-__ashiftrt_r4_29:
- shar r4
-__ashiftrt_r4_28:
- shar r4
-__ashiftrt_r4_27:
- shar r4
-__ashiftrt_r4_26:
- shar r4
-__ashiftrt_r4_25:
- shar r4
-__ashiftrt_r4_24:
- shlr16 r4
- shlr8 r4
- rts
- exts.b r4,r4
-__ashiftrt_r4_23:
- shar r4
-__ashiftrt_r4_22:
- shar r4
-__ashiftrt_r4_21:
- shar r4
-__ashiftrt_r4_20:
- shar r4
-__ashiftrt_r4_19:
- shar r4
-__ashiftrt_r4_18:
- shar r4
-__ashiftrt_r4_17:
- shar r4
-__ashiftrt_r4_16:
- shlr16 r4
- rts
- exts.w r4,r4
-__ashiftrt_r4_15:
- shar r4
-__ashiftrt_r4_14:
- shar r4
-__ashiftrt_r4_13:
- shar r4
-__ashiftrt_r4_12:
- shar r4
-__ashiftrt_r4_11:
- shar r4
-__ashiftrt_r4_10:
- shar r4
-__ashiftrt_r4_9:
- shar r4
-__ashiftrt_r4_8:
- shar r4
-__ashiftrt_r4_7:
- shar r4
-__ashiftrt_r4_6:
- shar r4
-__ashiftrt_r4_5:
- shar r4
-__ashiftrt_r4_4:
- shar r4
-__ashiftrt_r4_3:
- shar r4
-__ashiftrt_r4_2:
- shar r4
-__ashiftrt_r4_1:
- rts
- shar r4
-__ashiftrt_r4_0:
- rts
- nop
diff --git a/arch/sh/lib/ashldi3.c b/arch/sh/lib/ashldi3.c
deleted file mode 100644
index e5afe093584742..00000000000000
--- a/arch/sh/lib/ashldi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashldi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.low = 0;
- w.s.high = (unsigned int) uu.s.low << -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.low >> bm;
-
- w.s.low = (unsigned int) uu.s.low << b;
- w.s.high = ((unsigned int) uu.s.high << b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/sh/lib/ashlsi3.S b/arch/sh/lib/ashlsi3.S
deleted file mode 100644
index 4df4401cdf31d5..00000000000000
--- a/arch/sh/lib/ashlsi3.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashlsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashlsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
-
- .global __ashlsi3
- .global __ashlsi3_r0
-
- .align 2
-__ashlsi3:
- mov r5,r0
- .align 2
-__ashlsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashlsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashlsi3_table:
- .byte ashlsi3_0-ashlsi3_table
- .byte ashlsi3_1-ashlsi3_table
- .byte ashlsi3_2-ashlsi3_table
- .byte ashlsi3_3-ashlsi3_table
- .byte ashlsi3_4-ashlsi3_table
- .byte ashlsi3_5-ashlsi3_table
- .byte ashlsi3_6-ashlsi3_table
- .byte ashlsi3_7-ashlsi3_table
- .byte ashlsi3_8-ashlsi3_table
- .byte ashlsi3_9-ashlsi3_table
- .byte ashlsi3_10-ashlsi3_table
- .byte ashlsi3_11-ashlsi3_table
- .byte ashlsi3_12-ashlsi3_table
- .byte ashlsi3_13-ashlsi3_table
- .byte ashlsi3_14-ashlsi3_table
- .byte ashlsi3_15-ashlsi3_table
- .byte ashlsi3_16-ashlsi3_table
- .byte ashlsi3_17-ashlsi3_table
- .byte ashlsi3_18-ashlsi3_table
- .byte ashlsi3_19-ashlsi3_table
- .byte ashlsi3_20-ashlsi3_table
- .byte ashlsi3_21-ashlsi3_table
- .byte ashlsi3_22-ashlsi3_table
- .byte ashlsi3_23-ashlsi3_table
- .byte ashlsi3_24-ashlsi3_table
- .byte ashlsi3_25-ashlsi3_table
- .byte ashlsi3_26-ashlsi3_table
- .byte ashlsi3_27-ashlsi3_table
- .byte ashlsi3_28-ashlsi3_table
- .byte ashlsi3_29-ashlsi3_table
- .byte ashlsi3_30-ashlsi3_table
- .byte ashlsi3_31-ashlsi3_table
-
-ashlsi3_6:
- shll2 r0
-ashlsi3_4:
- shll2 r0
-ashlsi3_2:
- rts
- shll2 r0
-
-ashlsi3_7:
- shll2 r0
-ashlsi3_5:
- shll2 r0
-ashlsi3_3:
- shll2 r0
-ashlsi3_1:
- rts
- shll r0
-
-ashlsi3_14:
- shll2 r0
-ashlsi3_12:
- shll2 r0
-ashlsi3_10:
- shll2 r0
-ashlsi3_8:
- rts
- shll8 r0
-
-ashlsi3_15:
- shll2 r0
-ashlsi3_13:
- shll2 r0
-ashlsi3_11:
- shll2 r0
-ashlsi3_9:
- shll8 r0
- rts
- shll r0
-
-ashlsi3_22:
- shll2 r0
-ashlsi3_20:
- shll2 r0
-ashlsi3_18:
- shll2 r0
-ashlsi3_16:
- rts
- shll16 r0
-
-ashlsi3_23:
- shll2 r0
-ashlsi3_21:
- shll2 r0
-ashlsi3_19:
- shll2 r0
-ashlsi3_17:
- shll16 r0
- rts
- shll r0
-
-ashlsi3_30:
- shll2 r0
-ashlsi3_28:
- shll2 r0
-ashlsi3_26:
- shll2 r0
-ashlsi3_24:
- shll16 r0
- rts
- shll8 r0
-
-ashlsi3_31:
- shll2 r0
-ashlsi3_29:
- shll2 r0
-ashlsi3_27:
- shll2 r0
-ashlsi3_25:
- shll16 r0
- shll8 r0
- rts
- shll r0
-
-ashlsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/ashrdi3.c b/arch/sh/lib/ashrdi3.c
deleted file mode 100644
index ae263fbf25383b..00000000000000
--- a/arch/sh/lib/ashrdi3.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high =
- uu.s.high >> 31;
- w.s.low = uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/sh/lib/ashrsi3.S b/arch/sh/lib/ashrsi3.S
deleted file mode 100644
index bf3c4e03e6ffc9..00000000000000
--- a/arch/sh/lib/ashrsi3.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashrsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
- .global __ashrsi3
- .global __ashrsi3_r0
-
- .align 2
-__ashrsi3:
- mov r5,r0
- .align 2
-__ashrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashrsi3_table:
- .byte ashrsi3_0-ashrsi3_table
- .byte ashrsi3_1-ashrsi3_table
- .byte ashrsi3_2-ashrsi3_table
- .byte ashrsi3_3-ashrsi3_table
- .byte ashrsi3_4-ashrsi3_table
- .byte ashrsi3_5-ashrsi3_table
- .byte ashrsi3_6-ashrsi3_table
- .byte ashrsi3_7-ashrsi3_table
- .byte ashrsi3_8-ashrsi3_table
- .byte ashrsi3_9-ashrsi3_table
- .byte ashrsi3_10-ashrsi3_table
- .byte ashrsi3_11-ashrsi3_table
- .byte ashrsi3_12-ashrsi3_table
- .byte ashrsi3_13-ashrsi3_table
- .byte ashrsi3_14-ashrsi3_table
- .byte ashrsi3_15-ashrsi3_table
- .byte ashrsi3_16-ashrsi3_table
- .byte ashrsi3_17-ashrsi3_table
- .byte ashrsi3_18-ashrsi3_table
- .byte ashrsi3_19-ashrsi3_table
- .byte ashrsi3_20-ashrsi3_table
- .byte ashrsi3_21-ashrsi3_table
- .byte ashrsi3_22-ashrsi3_table
- .byte ashrsi3_23-ashrsi3_table
- .byte ashrsi3_24-ashrsi3_table
- .byte ashrsi3_25-ashrsi3_table
- .byte ashrsi3_26-ashrsi3_table
- .byte ashrsi3_27-ashrsi3_table
- .byte ashrsi3_28-ashrsi3_table
- .byte ashrsi3_29-ashrsi3_table
- .byte ashrsi3_30-ashrsi3_table
- .byte ashrsi3_31-ashrsi3_table
-
-ashrsi3_31:
- rotcl r0
- rts
- subc r0,r0
-
-ashrsi3_30:
- shar r0
-ashrsi3_29:
- shar r0
-ashrsi3_28:
- shar r0
-ashrsi3_27:
- shar r0
-ashrsi3_26:
- shar r0
-ashrsi3_25:
- shar r0
-ashrsi3_24:
- shlr16 r0
- shlr8 r0
- rts
- exts.b r0,r0
-
-ashrsi3_23:
- shar r0
-ashrsi3_22:
- shar r0
-ashrsi3_21:
- shar r0
-ashrsi3_20:
- shar r0
-ashrsi3_19:
- shar r0
-ashrsi3_18:
- shar r0
-ashrsi3_17:
- shar r0
-ashrsi3_16:
- shlr16 r0
- rts
- exts.w r0,r0
-
-ashrsi3_15:
- shar r0
-ashrsi3_14:
- shar r0
-ashrsi3_13:
- shar r0
-ashrsi3_12:
- shar r0
-ashrsi3_11:
- shar r0
-ashrsi3_10:
- shar r0
-ashrsi3_9:
- shar r0
-ashrsi3_8:
- shar r0
-ashrsi3_7:
- shar r0
-ashrsi3_6:
- shar r0
-ashrsi3_5:
- shar r0
-ashrsi3_4:
- shar r0
-ashrsi3_3:
- shar r0
-ashrsi3_2:
- shar r0
-ashrsi3_1:
- rts
- shar r0
-
-ashrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S
deleted file mode 100644
index 3e07074e009813..00000000000000
--- a/arch/sh/lib/checksum.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * $Id: checksum.S,v 1.10 2001/07/06 13:11:32 gniibe Exp $
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Pentium Pro/II routines:
- * Alexander Kjeldaas <astor@guardian.no>
- * Finn Arne Gangstad <finnag@guardian.no>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception
- * handling.
- * Andi Kleen, add zeroing on error
- * converted to pure assembler
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-/*
- * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
- */
-
-.text
-ENTRY(csum_partial)
- /*
- * Experiments with Ethernet and SLIP connections show that buff
- * is aligned on either a 2-byte or 4-byte boundary. We get at
- * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
- * Fortunately, it is easy to convert 2-byte alignment to 4-byte
- * alignment for the unrolled loop.
- */
- mov r4, r0
- tst #3, r0 ! Check alignment.
- bt/s 2f ! Jump if alignment is ok.
- mov r4, r7 ! Keep a copy to check for alignment
- !
- tst #1, r0 ! Check alignment.
- bt 21f ! Jump if alignment is boundary of 2bytes.
-
- ! buf is odd
- tst r5, r5
- add #-1, r5
- bt 9f
- mov.b @r4+, r0
- extu.b r0, r0
- addc r0, r6 ! t=0 from previous tst
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
- mov r4, r0
- tst #2, r0
- bt 2f
-21:
- ! buf is 2 byte aligned (len could be 0)
- add #-2, r5 ! Alignment uses up two bytes.
- cmp/pz r5 !
- bt/s 1f ! Jump if we had at least two bytes.
- clrt
- bra 6f
- add #2, r5 ! r5 was < 2. Deal with it.
-1:
- mov.w @r4+, r0
- extu.w r0, r0
- addc r0, r6
- bf 2f
- add #1, r6
-2:
- ! buf is 4 byte aligned (len could be 0)
- mov r5, r1
- mov #-5, r0
- shld r0, r1
- tst r1, r1
- bt/s 4f ! if it's =0, go to 4f
- clrt
- .align 2
-3:
- mov.l @r4+, r0
- mov.l @r4+, r2
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- addc r0, r6
- addc r2, r6
- movt r0
- dt r1
- bf/s 3b
- cmp/eq #1, r0
- ! here, we know r1==0
- addc r1, r6 ! add carry to r6
-4:
- mov r5, r0
- and #0x1c, r0
- tst r0, r0
- bt 6f
- ! 4 bytes or more remaining
- mov r0, r1
- shlr2 r1
- mov #0, r2
-5:
- addc r2, r6
- mov.l @r4+, r2
- movt r0
- dt r1
- bf/s 5b
- cmp/eq #1, r0
- addc r2, r6
- addc r1, r6 ! r1==0 here, so it means add carry-bit
-6:
- ! 3 bytes or less remaining
- mov #3, r0
- and r0, r5
- tst r5, r5
- bt 9f ! if it's =0 go to 9f
- mov #2, r1
- cmp/hs r1, r5
- bf 7f
- mov.w @r4+, r0
- extu.w r0, r0
- cmp/eq r1, r5
- bt/s 8f
- clrt
- shll16 r0
- addc r0, r6
-7:
- mov.b @r4+, r0
- extu.b r0, r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-8:
- addc r0, r6
- mov #0, r0
- addc r0, r6
-9:
- ! Check if the buffer was misaligned, if so realign sum
- mov r7, r0
- tst #1, r0
- bt 10f
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
-10:
- rts
- mov r6, r0
-
-/*
-unsigned int csum_partial_copy_generic (const char *src, char *dst, int len)
- */
-
-/*
- * Copy from ds while checksumming, otherwise like csum_partial with initial
- * sum being ~0U
- */
-
-#define EXC(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6001f ; \
- .previous
-
-!
-! r4: const char *SRC
-! r5: char *DST
-! r6: int LEN
-!
-ENTRY(csum_partial_copy_generic)
- mov #-1,r7
- mov #3,r0 ! Check src and dest are equally aligned
- mov r4,r1
- and r0,r1
- and r5,r0
- cmp/eq r1,r0
- bf 3f ! Different alignments, use slow version
- tst #1,r0 ! Check dest word aligned
- bf 3f ! If not, do it the slow way
-
- mov #2,r0
- tst r0,r5 ! Check dest alignment.
- bt 2f ! Jump if alignment is ok.
- add #-2,r6 ! Alignment uses up two bytes.
- cmp/pz r6 ! Jump if we had at least two bytes.
- bt/s 1f
- clrt
- add #2,r6 ! r6 was < 2. Deal with it.
- bra 4f
- mov r6,r2
-
-3: ! Handle different src and dest alignments.
- ! This is not common, so simple byte by byte copy will do.
- mov r6,r2
- shlr r6
- tst r6,r6
- bt 4f
- clrt
- .align 2
-5:
-EXC( mov.b @r4+,r1 )
-EXC( mov.b @r4+,r0 )
- extu.b r1,r1
-EXC( mov.b r1,@r5 )
-EXC( mov.b r0,@(1,r5) )
- extu.b r0,r0
- add #2,r5
-
-#ifdef __LITTLE_ENDIAN__
- shll8 r0
-#else
- shll8 r1
-#endif
- or r1,r0
-
- addc r0,r7
- movt r0
- dt r6
- bf/s 5b
- cmp/eq #1,r0
- mov #0,r0
- addc r0, r7
-
- mov r2, r0
- tst #1, r0
- bt 7f
- bra 5f
- clrt
-
- ! src and dest equally aligned, but to a two byte boundary.
- ! Handle first two bytes as a special case
- .align 2
-1:
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- add #2,r5
- extu.w r0,r0
- addc r0,r7
- mov #0,r0
- addc r0,r7
-2:
- mov r6,r2
- mov #-5,r0
- shld r0,r6
- tst r6,r6
- bt/s 2f
- clrt
- .align 2
-1:
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
-EXC( mov.l r1,@(4,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(8,r5) )
-EXC( mov.l r1,@(12,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(16,r5) )
-EXC( mov.l r1,@(20,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(24,r5) )
-EXC( mov.l r1,@(28,r5) )
- addc r1,r7
- add #32,r5
- movt r0
- dt r6
- bf/s 1b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-
-2: mov r2,r6
- mov #0x1c,r0
- and r0,r6
- cmp/pl r6
- bf/s 4f
- clrt
- shlr2 r6
-3:
-EXC( mov.l @r4+,r0 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
- add #4,r5
- movt r0
- dt r6
- bf/s 3b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-4: mov r2,r6
- mov #3,r0
- and r0,r6
- cmp/pl r6
- bf 7f
- mov #2,r1
- cmp/hs r1,r6
- bf 5f
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- extu.w r0,r0
- add #2,r5
- cmp/eq r1,r6
- bt/s 6f
- clrt
- shll16 r0
- addc r0,r7
-5:
-EXC( mov.b @r4+,r0 )
-EXC( mov.b r0,@r5 )
- extu.b r0,r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-6: addc r0,r7
- mov #0,r0
- addc r0,r7
-7:
-
-# Exception handler:
-.section .fixup, "ax"
-
-6001:
- rts
- mov #0,r0
-.previous
- rts
- mov r7,r0
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
deleted file mode 100644
index d4e9d18cee0bcc..00000000000000
--- a/arch/sh/lib/copy_page.S
+++ /dev/null
@@ -1,390 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * copy_page, __copy_user_page, __copy_user implementation of SuperH
- *
- * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Toshinobu Sugioka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-/*
- * copy_page
- * @to: P1 address
- * @from: P1 address
- *
- * void copy_page(void *to, void *from)
- */
-
-/*
- * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch
- * r8 --- from + PAGE_SIZE
- * r9 --- not used
- * r10 --- to
- * r11 --- from
- */
-ENTRY(copy_page)
- mov.l r8,@-r15
- mov.l r10,@-r15
- mov.l r11,@-r15
- mov r4,r10
- mov r5,r11
- mov r5,r8
- mov #(PAGE_SIZE >> 10), r0
- shll8 r0
- shll2 r0
- add r0,r8
- !
-1: mov.l @r11+,r0
- mov.l @r11+,r1
- mov.l @r11+,r2
- mov.l @r11+,r3
- mov.l @r11+,r4
- mov.l @r11+,r5
- mov.l @r11+,r6
- mov.l @r11+,r7
-#if defined(CONFIG_CPU_SH4)
- movca.l r0,@r10
-#else
- mov.l r0,@r10
-#endif
- add #32,r10
- mov.l r7,@-r10
- mov.l r6,@-r10
- mov.l r5,@-r10
- mov.l r4,@-r10
- mov.l r3,@-r10
- mov.l r2,@-r10
- mov.l r1,@-r10
- cmp/eq r11,r8
- bf/s 1b
- add #28,r10
- !
- mov.l @r15+,r11
- mov.l @r15+,r10
- mov.l @r15+,r8
- rts
- nop
-
-/*
- * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
- * Return the number of bytes NOT copied
- */
-#define EX(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6000f ; \
- .previous
-#define EX_NO_POP(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6005f ; \
- .previous
-ENTRY(__copy_user)
- ! Check if small number of bytes
- mov #11,r0
- mov r4,r3
- cmp/gt r0,r6 ! r6 (len) > r0 (11)
- bf/s .L_cleanup_loop_no_pop
- add r6,r3 ! last destination address
-
- ! Calculate bytes needed to align to src
- mov.l r11,@-r15
- neg r5,r0
- mov.l r10,@-r15
- add #4,r0
- mov.l r9,@-r15
- and #3,r0
- mov.l r8,@-r15
- tst r0,r0
- bt 2f
-
-1:
- ! Copy bytes to long word align src
-EX( mov.b @r5+,r1 )
- dt r0
- add #-1,r6
-EX( mov.b r1,@r4 )
- bf/s 1b
- add #1,r4
-
- ! Jump to appropriate routine depending on dest
-2: mov #3,r1
- mov r6, r2
- and r4,r1
- shlr2 r2
- shll2 r1
- mova .L_jump_tbl,r0
- mov.l @(r0,r1),r1
- jmp @r1
- nop
-
- .align 2
-.L_jump_tbl:
- .long .L_dest00
- .long .L_dest01
- .long .L_dest10
- .long .L_dest11
-
-/*
- * Come here if there are less than 12 bytes to copy
- *
- * Keep the branch target close, so the bf/s callee doesn't overflow
- * and result in a more expensive branch being inserted. This is the
- * fast-path for small copies, the jump via the jump table will hit the
- * default slow-path cleanup. -PFM.
- */
-.L_cleanup_loop_no_pop:
- tst r6,r6 ! Check explicitly for zero
- bt 1f
-
-2:
-EX_NO_POP( mov.b @r5+,r0 )
- dt r6
-EX_NO_POP( mov.b r0,@r4 )
- bf/s 2b
- add #1,r4
-
-1: mov #0,r0 ! normal return
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6005:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- rts
- nop
-
-! Destination = 00
-
-.L_dest00:
- ! Skip the large copy for small transfers
- mov #(32+32-4), r0
- cmp/gt r6, r0 ! r0 (60) > r6 (len)
- bt 1f
-
- ! Align dest to a 32 byte boundary
- neg r4,r0
- add #0x20, r0
- and #0x1f, r0
- tst r0, r0
- bt 2f
-
- sub r0, r6
- shlr2 r0
-3:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 3b
- add #4,r4
-
-2:
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r2 )
-EX( mov.l @r5+,r7 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.l @r5+,r11 )
-#ifdef CONFIG_CPU_SH4
-EX( movca.l r0,@r4 )
-#else
-EX( mov.l r0,@r4 )
-#endif
- add #-32, r6
-EX( mov.l r1,@(4,r4) )
- mov #32, r0
-EX( mov.l r2,@(8,r4) )
- cmp/gt r6, r0 ! r0 (32) > r6 (len)
-EX( mov.l r7,@(12,r4) )
-EX( mov.l r8,@(16,r4) )
-EX( mov.l r9,@(20,r4) )
-EX( mov.l r10,@(24,r4) )
-EX( mov.l r11,@(28,r4) )
- bf/s 2b
- add #32,r4
-
-1: mov r6, r0
- shlr2 r0
- tst r0, r0
- bt .L_cleanup
-1:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 10
-
-.L_dest10:
- mov r2,r7
- shlr2 r7
- shlr r7
- tst r7,r7
- mov #7,r0
- bt/s 1f
- and r0,r2
-2:
- dt r7
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.w r0,@r4 )
- add #2,r4
- xtrct r1,r0
- xtrct r8,r1
- xtrct r9,r8
- xtrct r10,r9
-
-EX( mov.l r0,@r4 )
-EX( mov.l r1,@(4,r4) )
-EX( mov.l r8,@(8,r4) )
-EX( mov.l r9,@(12,r4) )
-
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r0 )
- xtrct r1,r10
- xtrct r8,r1
- xtrct r0,r8
- shlr16 r0
-EX( mov.l r10,@(16,r4) )
-EX( mov.l r1,@(20,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.w r0,@(28,r4) )
- bf/s 2b
- add #30,r4
-#else
-EX( mov.l @(28,r5),r0 )
-EX( mov.l @(24,r5),r8 )
-EX( mov.l @(20,r5),r9 )
-EX( mov.l @(16,r5),r10 )
-EX( mov.w r0,@(30,r4) )
- add #-2,r4
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(28,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.l r9,@(20,r4) )
-
-EX( mov.l @(12,r5),r0 )
-EX( mov.l @(8,r5),r8 )
- xtrct r0,r10
-EX( mov.l @(4,r5),r9 )
- mov.l r10,@(16,r4)
-EX( mov.l @r5,r10 )
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(12,r4) )
-EX( mov.l r8,@(8,r4) )
- swap.w r10,r0
-EX( mov.l r9,@(4,r4) )
-EX( mov.w r0,@(2,r4) )
-
- add #32,r5
- bf/s 2b
- add #34,r4
-#endif
- tst r2,r2
- bt .L_cleanup
-
-1: ! Read longword, write two words per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.w r0,@(2,r4) )
-#else
-EX( mov.w r0,@(2,r4) )
- shlr16 r0
-EX( mov.w r0,@r4 )
-#endif
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 01 or 11
-
-.L_dest01:
-.L_dest11:
- ! Read longword, write byte, word, byte per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.b r0,@r4 )
- shlr8 r0
- add #1,r4
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.b r0,@(2,r4) )
- bf/s .L_dest01
- add #3,r4
-#else
-EX( mov.b r0,@(3,r4) )
- shlr8 r0
- swap.w r0,r7
-EX( mov.b r7,@r4 )
- add #1,r4
-EX( mov.w r0,@r4 )
- bf/s .L_dest01
- add #3,r4
-#endif
-
-! Cleanup last few bytes
-.L_cleanup:
- mov r6,r0
- and #3,r0
- tst r0,r0
- bt .L_exit
- mov r0,r6
-
-.L_cleanup_loop:
-EX( mov.b @r5+,r0 )
- dt r6
-EX( mov.b r0,@r4 )
- bf/s .L_cleanup_loop
- add #1,r4
-
-.L_exit:
- mov #0,r0 ! normal return
-
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6000:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- rts
- mov.l @r15+,r11
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
deleted file mode 100644
index dad8e6a54906be..00000000000000
--- a/arch/sh/lib/delay.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Precise Delay Loops for SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka & Kaz Kojima
- */
-
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-void __delay(unsigned long loops)
-{
- __asm__ __volatile__(
- /*
- * ST40-300 appears to have an issue with this code,
- * normally taking two cycles each loop, as with all
- * other SH variants. If however the branch and the
- * delay slot straddle an 8 byte boundary, this increases
- * to 3 cycles.
- * This align directive ensures this doesn't occur.
- */
- ".balign 8\n\t"
-
- "tst %0, %0\n\t"
- "1:\t"
- "bf/s 1b\n\t"
- " dt %0"
- : "=r" (loops)
- : "0" (loops)
- : "t");
-}
-
-inline void __const_udelay(unsigned long xloops)
-{
- xloops *= 4;
- __asm__("dmulu.l %0, %2\n\t"
- "sts mach, %0"
- : "=r" (xloops)
- : "0" (xloops),
- "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
- : "macl", "mach");
- __delay(++xloops);
-}
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
-}
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00000005);
-}
-
diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
deleted file mode 100644
index 0b67fbc44f6fef..00000000000000
--- a/arch/sh/lib/div64-generic.c
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic __div64_32 wrapper for __xdiv64_32.
- */
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-extern uint64_t __xdiv64_32(u64 n, u32 d);
-
-uint32_t __div64_32(u64 *xp, u32 y)
-{
- uint32_t rem;
- uint64_t q = __xdiv64_32(*xp, y);
-
- rem = *xp - q * y;
- *xp = q;
-
- return rem;
-}
diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S
deleted file mode 100644
index 4a9a966e71b0e7..00000000000000
--- a/arch/sh/lib/div64.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * unsigned long __xdiv64_32(unsigned long long n, unsigned long d);
- */
-
-#include <linux/linkage.h>
-
-.text
-ENTRY(__xdiv64_32)
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r4, r0
- mov r5, r1
-#else
- mov r4, r1
- mov r5, r0
-#endif
- cmp/hs r6, r1
- bf.s 1f
- mov #0, r2
-
- mov r1, r2
- mov #0, r3
- div0u
- .rept 32
- rotcl r2
- div1 r6, r3
- .endr
- rotcl r2
- mul.l r6, r2
- sts macl, r3
- sub r3, r1
-1:
- div0u
- .rept 32
- rotcl r0
- div1 r6, r1
- .endr
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r2, r1
- rts
- rotcl r0
-#else
- rotcl r0
- mov r0, r1
- rts
- mov r2, r0
-#endif
diff --git a/arch/sh/lib/io.c b/arch/sh/lib/io.c
deleted file mode 100644
index ebcf7c0a7335ad..00000000000000
--- a/arch/sh/lib/io.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/lib/io.c - SH32 optimized I/O routines
- *
- * Copyright (C) 2000 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- *
- * Provide real functions which expand to whatever the header file defined.
- * Also definitions of machine independent IO functions.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-void __raw_readsl(const void __iomem *addr, void *datap, int len)
-{
- u32 *data;
-
- for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
- *data++ = __raw_readl(addr);
-
- if (likely(len >= (0x20 >> 2))) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l @%7, %2 \n\t"
-#ifdef CONFIG_CPU_SH4
- "movca.l r0, @%0 \n\t"
-#else
- "mov.l r0, @%0 \n\t"
-#endif
- "mov.l @%7, %3 \n\t"
- "mov.l @%7, %4 \n\t"
- "mov.l @%7, %5 \n\t"
- "mov.l @%7, %6 \n\t"
- "mov.l @%7, r7 \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20>>2, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > len \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (data), "=&r" (len),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6)
- : "r"(addr), "0" (data), "1" (len)
- : "r0", "r7", "t", "memory");
- }
-
- for (; len != 0; len--)
- *data++ = __raw_readl(addr);
-}
-EXPORT_SYMBOL(__raw_readsl);
-
-void __raw_writesl(void __iomem *addr, const void *data, int len)
-{
- if (likely(len != 0)) {
- int tmp1;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "mov.l @%0+, %1 \n\t"
- "dt %3 \n\t"
- "bf.s 1b \n\t"
- " mov.l %1, @%4 \n\t"
- : "=&r" (data), "=&r" (tmp1)
- : "0" (data), "r" (len), "r"(addr)
- : "t", "memory");
- }
-}
-EXPORT_SYMBOL(__raw_writesl);
diff --git a/arch/sh/lib/libgcc.h b/arch/sh/lib/libgcc.h
deleted file mode 100644
index 58ada9e8f1c2bd..00000000000000
--- a/arch/sh/lib/libgcc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_LIBGCC_H
-#define __ASM_LIBGCC_H
-
-#include <asm/byteorder.h>
-
-typedef int word_type __attribute__ ((mode (__word__)));
-
-#ifdef __BIG_ENDIAN
-struct DWstruct {
- int high, low;
-};
-#elif defined(__LITTLE_ENDIAN)
-struct DWstruct {
- int low, high;
-};
-#else
-#error I feel sick.
-#endif
-
-typedef union {
- struct DWstruct s;
- long long ll;
-} DWunion;
-
-#endif /* __ASM_LIBGCC_H */
diff --git a/arch/sh/lib/lshrdi3.c b/arch/sh/lib/lshrdi3.c
deleted file mode 100644
index 33eaa1edbc3c06..00000000000000
--- a/arch/sh/lib/lshrdi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __lshrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.high = 0;
- w.s.low = (unsigned int) uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = (unsigned int) uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/sh/lib/lshrsi3.S b/arch/sh/lib/lshrsi3.S
deleted file mode 100644
index b79b8170061f33..00000000000000
--- a/arch/sh/lib/lshrsi3.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __lshrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __lshrsi3_r0
-!
-! Entry:
-!
-! r0: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
- .global __lshrsi3
- .global __lshrsi3_r0
-
- .align 2
-__lshrsi3:
- mov r5,r0
- .align 2
-__lshrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova lshrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-lshrsi3_table:
- .byte lshrsi3_0-lshrsi3_table
- .byte lshrsi3_1-lshrsi3_table
- .byte lshrsi3_2-lshrsi3_table
- .byte lshrsi3_3-lshrsi3_table
- .byte lshrsi3_4-lshrsi3_table
- .byte lshrsi3_5-lshrsi3_table
- .byte lshrsi3_6-lshrsi3_table
- .byte lshrsi3_7-lshrsi3_table
- .byte lshrsi3_8-lshrsi3_table
- .byte lshrsi3_9-lshrsi3_table
- .byte lshrsi3_10-lshrsi3_table
- .byte lshrsi3_11-lshrsi3_table
- .byte lshrsi3_12-lshrsi3_table
- .byte lshrsi3_13-lshrsi3_table
- .byte lshrsi3_14-lshrsi3_table
- .byte lshrsi3_15-lshrsi3_table
- .byte lshrsi3_16-lshrsi3_table
- .byte lshrsi3_17-lshrsi3_table
- .byte lshrsi3_18-lshrsi3_table
- .byte lshrsi3_19-lshrsi3_table
- .byte lshrsi3_20-lshrsi3_table
- .byte lshrsi3_21-lshrsi3_table
- .byte lshrsi3_22-lshrsi3_table
- .byte lshrsi3_23-lshrsi3_table
- .byte lshrsi3_24-lshrsi3_table
- .byte lshrsi3_25-lshrsi3_table
- .byte lshrsi3_26-lshrsi3_table
- .byte lshrsi3_27-lshrsi3_table
- .byte lshrsi3_28-lshrsi3_table
- .byte lshrsi3_29-lshrsi3_table
- .byte lshrsi3_30-lshrsi3_table
- .byte lshrsi3_31-lshrsi3_table
-
-lshrsi3_6:
- shlr2 r0
-lshrsi3_4:
- shlr2 r0
-lshrsi3_2:
- rts
- shlr2 r0
-
-lshrsi3_7:
- shlr2 r0
-lshrsi3_5:
- shlr2 r0
-lshrsi3_3:
- shlr2 r0
-lshrsi3_1:
- rts
- shlr r0
-
-lshrsi3_14:
- shlr2 r0
-lshrsi3_12:
- shlr2 r0
-lshrsi3_10:
- shlr2 r0
-lshrsi3_8:
- rts
- shlr8 r0
-
-lshrsi3_15:
- shlr2 r0
-lshrsi3_13:
- shlr2 r0
-lshrsi3_11:
- shlr2 r0
-lshrsi3_9:
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_22:
- shlr2 r0
-lshrsi3_20:
- shlr2 r0
-lshrsi3_18:
- shlr2 r0
-lshrsi3_16:
- rts
- shlr16 r0
-
-lshrsi3_23:
- shlr2 r0
-lshrsi3_21:
- shlr2 r0
-lshrsi3_19:
- shlr2 r0
-lshrsi3_17:
- shlr16 r0
- rts
- shlr r0
-
-lshrsi3_30:
- shlr2 r0
-lshrsi3_28:
- shlr2 r0
-lshrsi3_26:
- shlr2 r0
-lshrsi3_24:
- shlr16 r0
- rts
- shlr8 r0
-
-lshrsi3_31:
- shlr2 r0
-lshrsi3_29:
- shlr2 r0
-lshrsi3_27:
- shlr2 r0
-lshrsi3_25:
- shlr16 r0
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
deleted file mode 100644
index c6ca90cc960618..00000000000000
--- a/arch/sh/lib/mcount.S
+++ /dev/null
@@ -1,287 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/lib/mcount.S
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- * Copyright (C) 2008, 2009 Matt Fleming
- */
-#include <asm/ftrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#define MCOUNT_ENTER() \
- mov.l r4, @-r15; \
- mov.l r5, @-r15; \
- mov.l r6, @-r15; \
- mov.l r7, @-r15; \
- sts.l pr, @-r15; \
- \
- mov.l @(20,r15),r4; \
- sts pr, r5
-
-#define MCOUNT_LEAVE() \
- lds.l @r15+, pr; \
- mov.l @r15+, r7; \
- mov.l @r15+, r6; \
- mov.l @r15+, r5; \
- rts; \
- mov.l @r15+, r4
-
-#ifdef CONFIG_STACK_DEBUG
-/*
- * Perform diagnostic checks on the state of the kernel stack.
- *
- * Check for stack overflow. If there is less than 1KB free
- * then it has overflowed.
- *
- * Make sure the stack pointer contains a valid address. Valid
- * addresses for kernel stacks are anywhere after the bss
- * (after __bss_stop) and anywhere in init_thread_union (init_stack).
- */
-#define STACK_CHECK() \
- mov #(THREAD_SIZE >> 10), r0; \
- shll8 r0; \
- shll2 r0; \
- \
- /* r1 = sp & (THREAD_SIZE - 1) */ \
- mov #-1, r1; \
- add r0, r1; \
- and r15, r1; \
- \
- mov #TI_SIZE, r3; \
- mov #(STACK_WARN >> 8), r2; \
- shll8 r2; \
- add r3, r2; \
- \
- /* Is the stack overflowing? */ \
- cmp/hi r2, r1; \
- bf stack_panic; \
- \
- /* If sp > __bss_stop then we're OK. */ \
- mov.l .L_ebss, r1; \
- cmp/hi r1, r15; \
- bt 1f; \
- \
- /* If sp < init_stack, we're not OK. */ \
- mov.l .L_init_thread_union, r1; \
- cmp/hs r1, r15; \
- bf stack_panic; \
- \
- /* If sp > init_stack && sp < __bss_stop, not OK. */ \
- add r0, r1; \
- cmp/hs r1, r15; \
- bt stack_panic; \
-1:
-#else
-#define STACK_CHECK()
-#endif /* CONFIG_STACK_DEBUG */
-
- .align 2
- .globl _mcount
- .type _mcount,@function
- .globl mcount
- .type mcount,@function
-_mcount:
-mcount:
- STACK_CHECK()
-
-#ifndef CONFIG_FUNCTION_TRACER
- rts
- nop
-#else
- MCOUNT_ENTER()
-
-#ifdef CONFIG_DYNAMIC_FTRACE
- .globl mcount_call
-mcount_call:
- mov.l .Lftrace_stub, r6
-#else
- mov.l .Lftrace_trace_function, r6
- mov.l ftrace_stub, r7
- cmp/eq r6, r7
- bt skip_trace
- mov.l @r6, r6
-#endif
-
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- mov.l .Lftrace_graph_return, r6
- mov.l .Lftrace_stub, r7
- cmp/eq r6, r7
- bt 1f
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
-1:
- mov.l .Lftrace_graph_entry, r6
- mov.l .Lftrace_graph_entry_stub, r7
- cmp/eq r6, r7
- bt skip_trace
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
- .align 2
-.Lftrace_graph_return:
- .long ftrace_graph_return
-.Lftrace_graph_entry:
- .long ftrace_graph_entry
-.Lftrace_graph_entry_stub:
- .long ftrace_graph_entry_stub
-.Lftrace_graph_caller:
- .long ftrace_graph_caller
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl skip_trace
-skip_trace:
- MCOUNT_LEAVE()
-
- .align 2
-.Lftrace_trace_function:
- .long ftrace_trace_function
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-/*
- * NOTE: Do not move either ftrace_graph_call or ftrace_caller
- * as this will affect the calculation of GRAPH_INSN_OFFSET.
- */
- .globl ftrace_graph_call
-ftrace_graph_call:
- mov.l .Lskip_trace, r0
- jmp @r0
- nop
-
- .align 2
-.Lskip_trace:
- .long skip_trace
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl ftrace_caller
-ftrace_caller:
- MCOUNT_ENTER()
-
- .globl ftrace_call
-ftrace_call:
- mov.l .Lftrace_stub, r6
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- bra ftrace_graph_call
- nop
-#else
- MCOUNT_LEAVE()
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
- .align 2
-
-/*
- * NOTE: From here on the locations of the .Lftrace_stub label and
- * ftrace_stub itself are fixed. Adding additional data here will skew
- * the displacement for the memory table and break the block replacement.
- * Place new labels either after the ftrace_stub body, or before
- * ftrace_caller. You have been warned.
- */
-.Lftrace_stub:
- .long ftrace_stub
-
- .globl ftrace_stub
-ftrace_stub:
- rts
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- .globl ftrace_graph_caller
-ftrace_graph_caller:
- mov.l 2f, r1
- jmp @r1
- nop
-1:
- /*
- * MCOUNT_ENTER() pushed 5 registers onto the stack, so
- * the stack address containing our return address is
- * r15 + 20.
- */
- mov #20, r0
- add r15, r0
- mov r0, r4
-
- mov.l .Lprepare_ftrace_return, r0
- jsr @r0
- nop
-
- MCOUNT_LEAVE()
-
- .align 2
-2: .long skip_trace
-.Lprepare_ftrace_return:
- .long prepare_ftrace_return
-
- .globl return_to_handler
-return_to_handler:
- /*
- * Save the return values.
- */
- mov.l r0, @-r15
- mov.l r1, @-r15
-
- mov #0, r4
-
- mov.l .Lftrace_return_to_handler, r0
- jsr @r0
- nop
-
- /*
- * The return value from ftrace_return_handler has the real
- * address that we should return to.
- */
- lds r0, pr
- mov.l @r15+, r1
- rts
- mov.l @r15+, r0
-
-
- .align 2
-.Lftrace_return_to_handler:
- .long ftrace_return_to_handler
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_STACK_DEBUG
- .globl stack_panic
-stack_panic:
- mov.l .Ldump_stack, r0
- jsr @r0
- nop
-
- mov.l .Lpanic, r0
- jsr @r0
- mov.l .Lpanic_s, r4
-
- rts
- nop
-
- .align 2
-.L_init_thread_union:
- .long init_thread_union
-.L_ebss:
- .long __bss_stop
-.Lpanic:
- .long panic
-.Lpanic_s:
- .long .Lpanic_str
-.Ldump_stack:
- .long dump_stack
-
- .section .rodata
- .align 2
-.Lpanic_str:
- .string "Stack error"
-#endif /* CONFIG_STACK_DEBUG */
diff --git a/arch/sh/lib/memchr.S b/arch/sh/lib/memchr.S
deleted file mode 100644
index 8ded104077aa32..00000000000000
--- a/arch/sh/lib/memchr.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memchr.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memchr" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memchr(const void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-ENTRY(memchr)
- tst r6,r6
- bt/s 2f
- exts.b r5,r5
-1: mov.b @r4,r1
- cmp/eq r1,r5
- bt/s 3f
- dt r6
- bf/s 1b
- add #1,r4
-2: mov #0,r4
-3: rts
- mov r4,r0
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
deleted file mode 100644
index a2435c0f6302ff..00000000000000
--- a/arch/sh/lib/memcpy-sh4.S
+++ /dev/null
@@ -1,800 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2002 STMicroelectronics Ltd
- * Modified from memcpy.S and micro-optimised for SH4
- * Stuart Menefy (stuart.menefy@st.com)
- *
- */
-#include <linux/linkage.h>
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- *
- * It is assumed that there is no overlap between src and dst.
- * If there is an overlap, then the results are undefined.
- */
-
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase1:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-1,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll16 r3 ! 103 EX
-
- mov r1,r6 ! 5 MT (latency=0)
- shll8 r3 ! 102 EX ! Oxxx
-
- shlr8 r6 ! 106 EX ! xNML
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! ONML
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! KLMN
- mov r7,r3 ! 5 MT (latency=0) ! OPQR
-
- cmp/hi r2,r0 ! 57 MT
- shlr16 r3 ! 107 EX
-
- shlr8 r3 ! 106 EX ! xxxO
- mov r1,r6 ! 5 MT (latency=0)
-
- shll8 r6 ! 102 EX ! LMNx
- mov r1,r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! LMNO
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#endif
- ! Finally, copy a byte at once, if necessary
-
- add #4,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase3:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-3,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll8 r3 ! 102 EX ! QPOx
-
- mov r1,r6 ! 5 MT (latency=0)
- shlr16 r6 ! 107 EX
-
- shlr8 r6 ! 106 EX ! xxxN
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! QPON
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov r7,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r7 ! KLMN
- mov r7,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
-
- ! Finally, copy a byte at once, if necessary
-
- add #6,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-ENTRY(memcpy)
-
- ! Calculate the invariants which will be used in the remainder
- ! of the code:
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
-
- ! Short circuit the common case of src, dst and len being 32 bit aligned
- ! and test for zero length move
-
- mov r6, r0 ! 5 MT (0 cycle latency)
- or r4, r0 ! 82 EX
-
- or r5, r0 ! 82 EX
- tst r6, r6 ! 86 MT
-
- bt/s 99f ! 111 BR (zero len)
- tst #3, r0 ! 87 MT
-
- mov r4, r0 ! 5 MT (0 cycle latency)
- add r6, r0 ! 49 EX
-
- mov #16, r1 ! 6 EX
- bt/s .Lcase00 ! 111 BR (aligned)
-
- sub r4, r5 ! 75 EX
-
- ! Arguments are not nicely long word aligned or zero len.
- ! Check for small copies, and if so do a simple byte at a time copy.
- !
- ! Deciding on an exact value of 'small' is not easy, as the point at which
- ! using the optimised routines become worthwhile varies (these are the
- ! cycle counts for differnet sizes using byte-at-a-time vs. optimised):
- ! size byte-at-time long word byte
- ! 16 42 39-40 46-50 50-55
- ! 24 58 43-44 54-58 62-67
- ! 36 82 49-50 66-70 80-85
- ! However the penalty for getting it 'wrong' is much higher for long word
- ! aligned data (and this is more common), so use a value of 16.
-
- cmp/gt r6,r1 ! 56 MT
-
- add #-1,r5 ! 50 EX
- bf/s 6f ! 108 BR (not small)
-
- mov r5, r3 ! 5 MT (latency=0)
- shlr r6 ! 104 EX
-
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
- bf/s 4f ! 111 BR
-
- add #-1,r3 ! 50 EX
- tst r6, r6 ! 86 MT
-
- bt/s 98f ! 110 BR
- mov.b r1,@-r0 ! 29 LS
-
- ! 4 cycles, 2 bytes per iteration
-3: mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
-4: mov.b @(r0,r3),r2 ! 20 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.b r1,@-r0 ! 29 LS
- bf/s 3b ! 111 BR
-
- mov.b r2,@-r0 ! 29 LS
-98:
- rts
- nop
-
-99: rts
- mov r4, r0
-
- ! Size is not small, so its worthwhile looking for optimisations.
- ! First align destination to a long word boundary.
- !
- ! r5 = normal value -1
-
-6: tst #3, r0 ! 87 MT
- mov #3, r3 ! 6 EX
-
- bt/s 2f ! 111 BR
- and r0,r3 ! 78 EX
-
- ! 3 cycles, 1 byte per iteration
-1: dt r3 ! 67 EX
- mov.b @(r0,r5),r1 ! 19 LS (latency=2)
-
- add #-1, r6 ! 79 EX
- bf/s 1b ! 109 BR
-
- mov.b r1,@-r0 ! 28 LS
-
-2: add #1, r5 ! 79 EX
-
- ! Now select the appropriate bulk transfer code based on relative
- ! alignment of src and dst.
-
- mov r0, r3 ! 5 MT (latency=0)
-
- mov r5, r0 ! 5 MT (latency=0)
- tst #1, r0 ! 87 MT
-
- bf/s 1f ! 111 BR
- mov #64, r7 ! 6 EX
-
- ! bit 0 clear
-
- cmp/ge r7, r6 ! 55 MT
-
- bt/s 2f ! 111 BR
- tst #2, r0 ! 87 MT
-
- ! small
- bt/s .Lcase0
- mov r3, r0
-
- bra .Lcase2
- nop
-
- ! big
-2: bt/s .Lcase0b
- mov r3, r0
-
- bra .Lcase2b
- nop
-
- ! bit 0 set
-1: tst #2, r0 ! 87 MT
-
- bt/s .Lcase1
- mov r3, r0
-
- bra .Lcase3
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
-
- ! src, dst and size are all long word aligned
- ! size is non-zero
-
- .balign 32
-.Lcase00:
- mov #64, r1 ! 6 EX
- mov r5, r3 ! 5 MT (latency=0)
-
- cmp/gt r6, r1 ! 56 MT
- add #-4, r5 ! 50 EX
-
- bf .Lcase00b ! 108 BR (big loop)
- shlr2 r6 ! 105 EX
-
- shlr r6 ! 104 EX
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
- bf/s 4f ! 111 BR
- add #-8, r3 ! 50 EX
-
- tst r6, r6 ! 86 MT
- bt/s 5f ! 110 BR
-
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
-5: rts
- nop
-
-
- ! Size is 16 or greater and less than 64, but may have trailing bytes
-
- .balign 32
-.Lcase0:
- add #-4, r5 ! 50 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- mov #4, r2 ! 6 EX
-
- add #11, r7 ! 50 EX
- tst r2, r6 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r1, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
- add #3,r5 ! 50 EX
-
- cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- .balign 32
-.Lcase0b:
- add #-4, r5 ! 50 EX
-
-.Lcase00b:
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! copy initial words until cache line aligned
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- tst #4, r0 ! 87 MT
-
- mov r5, r6 ! 5 MT (latency=0)
- add #-4, r6 ! 50 EX
-
- bt/s 4f ! 111 BR
- add #8, r3 ! 50 EX
-
- tst #0x18, r0 ! 87 MT
-
- bt/s 1f ! 109 BR
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r6), r7 ! 21 LS (latency=2)
- cmp/eq r3, r0 ! 54 MT
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r7, @-r0 ! 30 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1c, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- ! 16 cycles, 32 bytes per iteration
-2: mov.l @(0x00,r5),r0 ! 18 LS (latency=2)
- add #-0x20, r1 ! 50 EX
- mov.l @(0x04,r5),r3 ! 18 LS (latency=2)
- mov.l @(0x08,r5),r6 ! 18 LS (latency=2)
- mov.l @(0x0c,r5),r7 ! 18 LS (latency=2)
- mov.l @(0x10,r5),r8 ! 18 LS (latency=2)
- mov.l @(0x14,r5),r9 ! 18 LS (latency=2)
- mov.l @(0x18,r5),r10 ! 18 LS (latency=2)
- mov.l @(0x1c,r5),r11 ! 18 LS (latency=2)
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- mov.l r3,@(0x04,r1) ! 33 LS
- mov.l r6,@(0x08,r1) ! 33 LS
- mov.l r7,@(0x0c,r1) ! 33 LS
-
- mov.l r8,@(0x10,r1) ! 33 LS
- add #-0x20, r5 ! 50 EX
-
- mov.l r9,@(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10,@(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11,@(0x1c,r1) ! 33 LS
-
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
- sub r4, r1 ! 75 EX (len remaining)
-
- ! number of trailing bytes is non-zero
- !
- ! invariants restored (r5 already decremented by 4)
- ! also r1=num bytes remaining
-
- mov #4, r2 ! 6 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- add #0x1c, r5 ! 50 EX (back to -4)
- cmp/hs r2, r1 ! 58 MT
-
- bf/s 5f ! 108 BR
- add #11, r7 ! 50 EX
-
- mov.l @(r0, r5), r6 ! 21 LS (latency=2)
- tst r2, r1 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- cmp/hs r2, r1 ! 58 MT
-
- bt/s 5f ! 111 BR
- mov.l r6,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r6 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r6, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
-5: cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
- add #3,r5 ! 50 EX
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
-
- .balign 32
-.Lcase2:
- ! Size is 16 or greater and less then 64, but may have trailing bytes
-
-2: mov r5, r6 ! 5 MT (latency=0)
- add #-2,r5 ! 50 EX
-
- mov r4,r2 ! 5 MT (latency=0)
- add #-4,r6 ! 50 EX
-
- add #7,r2 ! 50 EX
-3: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
-
- mov.w @(r0,r6),r3 ! 20 LS (latency=2)
- cmp/hi r2,r0 ! 57 MT
-
- mov.w r1,@-r0 ! 29 LS
- bt/s 3b ! 111 BR
-
- mov.w r3,@-r0 ! 29 LS
-
- bra 10f
- nop
-
-
- .balign 32
-.Lcase2b:
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- add #-2, r5 ! 50 EX
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! Copy a short word one at a time until we are cache line aligned
- ! Normal values: r0, r2, r3, r4
- ! Unused: r1, r6, r7
- ! Mod: r5 (=r5-2)
- !
- add #2, r3 ! 50 EX
-
-2: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
- cmp/eq r3,r0 ! 54 MT
-
- bf/s 2b ! 111 BR
-
- mov.w r1,@-r0 ! 29 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5 (=r5-2)
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- mov.l r12, @-r15 ! 30 LS
-
- ! 17 cycles, 32 bytes per iteration
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-2: mov.w @r5+, r0 ! 14 LS (latency=2) ..JI
- add #-0x20, r1 ! 50 EX
-
- mov.l @r5+, r3 ! 15 LS (latency=2) NMLK
-
- mov.l @r5+, r6 ! 15 LS (latency=2) RQPO
- shll16 r0 ! 103 EX JI..
-
- mov.l @r5+, r7 ! 15 LS (latency=2)
- xtrct r3, r0 ! 48 EX LKJI
-
- mov.l @r5+, r8 ! 15 LS (latency=2)
- xtrct r6, r3 ! 48 EX PONM
-
- mov.l @r5+, r9 ! 15 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @r5+, r10 ! 15 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @r5+, r11 ! 15 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.w @r5+, r12 ! 15 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- xtrct r11, r10 ! 48 EX
-
- mov.l r3, @(0x04,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r6, @(0x08,r1) ! 33 LS
-
- mov.l r7, @(0x0c,r1) ! 33 LS
-
- mov.l r8, @(0x10,r1) ! 33 LS
- add #-0x40, r5 ! 50 EX
-
- mov.l r9, @(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x1c,r1) ! 33 LS
-#else
-2: mov.w @(0x1e,r5), r0 ! 17 LS (latency=2)
- add #-2, r5 ! 50 EX
-
- mov.l @(0x1c,r5), r3 ! 18 LS (latency=2)
- add #-4, r1 ! 50 EX
-
- mov.l @(0x18,r5), r6 ! 18 LS (latency=2)
- shll16 r0 ! 103 EX
-
- mov.l @(0x14,r5), r7 ! 18 LS (latency=2)
- xtrct r3, r0 ! 48 EX
-
- mov.l @(0x10,r5), r8 ! 18 LS (latency=2)
- xtrct r6, r3 ! 48 EX
-
- mov.l @(0x0c,r5), r9 ! 18 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @(0x08,r5), r10 ! 18 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @(0x04,r5), r11 ! 18 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.l @(0x00,r5), r12 ! 18 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- add #-0x1c, r1 ! 50 EX
-
- mov.l r3, @(0x18,r1) ! 33 LS
- xtrct r11, r10 ! 48 EX
-
- mov.l r6, @(0x14,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r7, @(0x10,r1) ! 33 LS
-
- mov.l r8, @(0x0c,r1) ! 33 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r9, @(0x08,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x04,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x00,r1) ! 33 LS
-#endif
-
- mov.l @r15+, r12
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
-
- add #0x1e, r5 ! 50 EX
-
- ! Finish off a short word at a time
- ! r5 must be invariant - 2
-10: mov r4,r2 ! 5 MT (latency=0)
- add #1,r2 ! 50 EX
-
- cmp/hi r2, r0 ! 57 MT
- bf/s 1f ! 109 BR
-
- add #2, r2 ! 50 EX
-
-3: mov.w @(r0,r5),r1 ! 20 LS
- cmp/hi r2,r0 ! 57 MT
-
- bt/s 3b ! 109 BR
-
- mov.w r1,@-r0 ! 29 LS
-1:
-
- !
- ! Finally, copy the last byte if necessary
- cmp/eq r4,r0 ! 54 MT
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
diff --git a/arch/sh/lib/memcpy.S b/arch/sh/lib/memcpy.S
deleted file mode 100644
index 08ab3062c4b27c..00000000000000
--- a/arch/sh/lib/memcpy.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memcpy.S,v 1.3 2001/07/27 11:50:52 gniibe Exp $
- *
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- * No overlap between the memory of DST and of SRC are assumed.
- */
-
-#include <linux/linkage.h>
-ENTRY(memcpy)
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r4,r0
- sub r4,r5 ! From here, r5 has the distance to r0
- add r6,r0 ! From here, r0 points the end of copying point
- mov #12,r1
- cmp/gt r6,r1
- bt/s 7f ! if it's too small, copy a byte at once
- add #-1,r5
- add #1,r5
- ! From here, r6 is free
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
- mov r5,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-7: mov r4,r2
- add #1,r2
-8:
- cmp/hi r2,r0
- mov.b @(r0,r5),r1
- bt/s 8b ! while (r0>r2)
- mov.b r1,@-r0
-9:
- rts
- nop
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-4,r5
- add #3,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
- add #-3,r5
-2: ! Second, copy a long word at once
- mov r4,r2
- add #7,r2
-3: mov.l @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.l r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #3,r5
- bra 8b
- add #-6,r2
-
-case1:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll16 r3
- shll8 r3 ! Oxxx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr8 r6 ! xNML
- or r6,r3 ! ONML
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr16 r3
- shlr8 r3 ! xxxO
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll8 r6 ! LMNx
- or r6,r3 ! LMNO
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #4,r5
- bra 8b
- add #-6,r2
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r5
- mov.b @(r0,r5),r1
- mov.b r1,@-r0
- !
-2: ! Second, read a word and write a word at once
- add #-1,r5
- mov r4,r2
- add #3,r2
- !
-3: mov.w @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.w r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
-case3:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r5
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll8 r3 ! QPOx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr16 r6
- shlr8 r6 ! xxxN
- or r6,r3 ! QPON
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #6,r5
- bra 8b
- add #-6,r2
diff --git a/arch/sh/lib/memmove.S b/arch/sh/lib/memmove.S
deleted file mode 100644
index bdca321814a95a..00000000000000
--- a/arch/sh/lib/memmove.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memmove.S,v 1.2 2001/07/27 11:51:09 gniibe Exp $
- *
- * "memmove" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memmove(void *dst, const void *src, size_t n);
- * The memory areas may overlap.
- */
-
-#include <linux/linkage.h>
-ENTRY(memmove)
- ! if dest > src, call memcpy (it copies in decreasing order)
- cmp/hi r5,r4
- bf 1f
- mov.l 2f,r0
- jmp @r0
- nop
- .balign 4
-2: .long memcpy
-1:
- sub r5,r4 ! From here, r4 has the distance to r0
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r5,r0
- add r6,r5
- mov #12,r1
- cmp/gt r6,r1
- bt/s 8f ! if it's too small, copy a byte at once
- add #-1,r4
- add #1,r4
- !
- ! [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0+r4--> [ ... ] r0 --> [ ... ]
- ! : :
- ! [ ... ] [ ... ]
- ! r5 -->
- !
- mov r4,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-8: mov.b @r0+,r1
- cmp/hs r5,r0
- bf/s 8b ! while (r0<r5)
- mov.b r1,@(r0,r4)
- add #1,r4
-9:
- add r4,r0
- rts
- sub r6,r0
-
-case_none:
- bra 8b
- add #-1,r4
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, copy a long word at once
- add #-3,r4
- add #-3,r5
-3: mov.l @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.l r1,@(r0,r4)
- add #3,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #4,r4
- bra 8b
- add #-1,r4
-
-case3:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r4
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr8 r3 ! xJIH
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll16 r2
- shll8 r2 ! Kxxx
- or r2,r3 ! KJIH
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll8 r3 ! HIJx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr16 r2
- shlr8 r2 ! xxxK
- or r2,r3 ! HIJK
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #7,r4
- add #-3,r0
- bra 8b
- add #-1,r4
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r4
- mov.b @r0+,r1
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a word and write a word at once
- add #-1,r4
- add #-1,r5
- !
-3: mov.w @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.w r1,@(r0,r4)
- add #1,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #2,r4
- mov.b @r0,r1
- mov.b r1,@(r0,r4)
- bra 9b
- add #1,r0
-
-case1:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll16 r1
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr16 r3
- shlr8 r3 ! xxxJ
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll8 r2 ! MLKx
- or r2,r3 ! MLKJ
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr16 r1
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll16 r3
- shll8 r3 ! Jxxx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr8 r2 ! xKLM
- or r2,r3 ! JKLM
- cmp/hs r5,r0
- bf/s 3b ! while(r0<r5)
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #5,r4
- add #-3,r0
- bra 8b
- add #-1,r4
diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S
deleted file mode 100644
index 10649c4cdab8a4..00000000000000
--- a/arch/sh/lib/memset-sh4.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memset" implementation for SH4
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2009 STMicroelectronics Limited
- * Author: Stuart Menefy <stuart.menefy:st.com>
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- mov #12,r0
- add r6,r4
- cmp/gt r6,r0
- bt/s 40f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
-
- ! Check if enough bytes need to be copied to be worth the big loop
- mov #0x40, r0 ! (MT)
- cmp/gt r6,r0 ! (MT) 64 > len => slow loop
-
- bt/s 22f
- mov r6,r0
-
- ! align the dst to the cache block size if necessary
- mov r4, r3
- mov #~(0x1f), r1
-
- and r3, r1
- cmp/eq r3, r1
-
- bt/s 11f ! dst is already aligned
- sub r1, r3 ! r3-r1 -> r3
- shlr2 r3 ! number of loops
-
-10: mov.l r5,@-r4
- dt r3
- bf/s 10b
- add #-4, r6
-
-11: ! dst is 32byte aligned
- mov r6,r2
- mov #-5,r0
- shld r0,r2 ! number of loops
-
- add #-32, r4
- mov r5, r0
-12:
- movca.l r0,@r4
- mov.l r5,@(4, r4)
- mov.l r5,@(8, r4)
- mov.l r5,@(12,r4)
- mov.l r5,@(16,r4)
- mov.l r5,@(20,r4)
- add #-0x20, r6
- mov.l r5,@(24,r4)
- dt r2
- mov.l r5,@(28,r4)
- bf/s 12b
- add #-32, r4
-
- add #32, r4
- mov #8, r0
- cmp/ge r0, r6
- bf 40f
-
- mov r6,r0
-22:
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
-
- ! fill bytes (length may be zero)
-40: tst r6,r6
- bt 5f
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S
deleted file mode 100644
index a6d5ec0bd9cf93..00000000000000
--- a/arch/sh/lib/memset.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memset.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memset" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- tst r6,r6
- bt/s 5f ! if n=0, do nothing
- add r6,r4
- mov #12,r0
- cmp/gt r6,r0
- bt/s 4f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
- !
- mov r6,r0
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
- tst r6,r6
- bt 5f
- ! fill bytes
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/movmem.S b/arch/sh/lib/movmem.S
deleted file mode 100644
index 8ac54d6b38a1b9..00000000000000
--- a/arch/sh/lib/movmem.S
+++ /dev/null
@@ -1,217 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .text
- .balign 4
- .global __movmem
- .global __movstr
- .set __movstr, __movmem
- /* This would be a lot simpler if r6 contained the byte count
- minus 64, and we wouldn't be called here for a byte count of 64. */
-__movmem:
- sts.l pr,@-r15
- shll2 r6
- bsr __movmemSI52+2
- mov.l @(48,r5),r0
- .balign 4
-movmem_loop: /* Reached with rts */
- mov.l @(60,r5),r0
- add #-64,r6
- mov.l r0,@(60,r4)
- tst r6,r6
- mov.l @(56,r5),r0
- bt movmem_done
- mov.l r0,@(56,r4)
- cmp/pl r6
- mov.l @(52,r5),r0
- add #64,r5
- mov.l r0,@(52,r4)
- add #64,r4
- bt __movmemSI52
-! done all the large groups, do the remainder
-! jump to movmem+
- mova __movmemSI4+4,r0
- add r6,r0
- jmp @r0
-movmem_done: ! share slot insn, works out aligned.
- lds.l @r15+,pr
- mov.l r0,@(56,r4)
- mov.l @(52,r5),r0
- rts
- mov.l r0,@(52,r4)
- .balign 4
-
- .global __movmemSI64
- .global __movstrSI64
- .set __movstrSI64, __movmemSI64
-__movmemSI64:
- mov.l @(60,r5),r0
- mov.l r0,@(60,r4)
- .global __movmemSI60
- .global __movstrSI60
- .set __movstrSI60, __movmemSI60
-__movmemSI60:
- mov.l @(56,r5),r0
- mov.l r0,@(56,r4)
- .global __movmemSI56
- .global __movstrSI56
- .set __movstrSI56, __movmemSI56
-__movmemSI56:
- mov.l @(52,r5),r0
- mov.l r0,@(52,r4)
- .global __movmemSI52
- .global __movstrSI52
- .set __movstrSI52, __movmemSI52
-__movmemSI52:
- mov.l @(48,r5),r0
- mov.l r0,@(48,r4)
- .global __movmemSI48
- .global __movstrSI48
- .set __movstrSI48, __movmemSI48
-__movmemSI48:
- mov.l @(44,r5),r0
- mov.l r0,@(44,r4)
- .global __movmemSI44
- .global __movstrSI44
- .set __movstrSI44, __movmemSI44
-__movmemSI44:
- mov.l @(40,r5),r0
- mov.l r0,@(40,r4)
- .global __movmemSI40
- .global __movstrSI40
- .set __movstrSI40, __movmemSI40
-__movmemSI40:
- mov.l @(36,r5),r0
- mov.l r0,@(36,r4)
- .global __movmemSI36
- .global __movstrSI36
- .set __movstrSI36, __movmemSI36
-__movmemSI36:
- mov.l @(32,r5),r0
- mov.l r0,@(32,r4)
- .global __movmemSI32
- .global __movstrSI32
- .set __movstrSI32, __movmemSI32
-__movmemSI32:
- mov.l @(28,r5),r0
- mov.l r0,@(28,r4)
- .global __movmemSI28
- .global __movstrSI28
- .set __movstrSI28, __movmemSI28
-__movmemSI28:
- mov.l @(24,r5),r0
- mov.l r0,@(24,r4)
- .global __movmemSI24
- .global __movstrSI24
- .set __movstrSI24, __movmemSI24
-__movmemSI24:
- mov.l @(20,r5),r0
- mov.l r0,@(20,r4)
- .global __movmemSI20
- .global __movstrSI20
- .set __movstrSI20, __movmemSI20
-__movmemSI20:
- mov.l @(16,r5),r0
- mov.l r0,@(16,r4)
- .global __movmemSI16
- .global __movstrSI16
- .set __movstrSI16, __movmemSI16
-__movmemSI16:
- mov.l @(12,r5),r0
- mov.l r0,@(12,r4)
- .global __movmemSI12
- .global __movstrSI12
- .set __movstrSI12, __movmemSI12
-__movmemSI12:
- mov.l @(8,r5),r0
- mov.l r0,@(8,r4)
- .global __movmemSI8
- .global __movstrSI8
- .set __movstrSI8, __movmemSI8
-__movmemSI8:
- mov.l @(4,r5),r0
- mov.l r0,@(4,r4)
- .global __movmemSI4
- .global __movstrSI4
- .set __movstrSI4, __movmemSI4
-__movmemSI4:
- mov.l @(0,r5),r0
- rts
- mov.l r0,@(0,r4)
-
- .global __movmem_i4_even
- .global __movstr_i4_even
- .set __movstr_i4_even, __movmem_i4_even
-
- .global __movmem_i4_odd
- .global __movstr_i4_odd
- .set __movstr_i4_odd, __movmem_i4_odd
-
- .global __movmemSI12_i4
- .global __movstrSI12_i4
- .set __movstrSI12_i4, __movmemSI12_i4
-
- .p2align 5
-L_movmem_2mod4_end:
- mov.l r0,@(16,r4)
- rts
- mov.l r1,@(20,r4)
-
- .p2align 2
-
-__movmem_i4_even:
- mov.l @r5+,r0
- bra L_movmem_start_even
- mov.l @r5+,r1
-
-__movmem_i4_odd:
- mov.l @r5+,r1
- add #-4,r4
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r1,@(4,r4)
- mov.l r2,@(8,r4)
-
-L_movmem_loop:
- mov.l r3,@(12,r4)
- dt r6
- mov.l @r5+,r0
- bt/s L_movmem_2mod4_end
- mov.l @r5+,r1
- add #16,r4
-L_movmem_start_even:
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r0,@r4
- dt r6
- mov.l r1,@(4,r4)
- bf/s L_movmem_loop
- mov.l r2,@(8,r4)
- rts
- mov.l r3,@(12,r4)
-
- .p2align 4
-__movmemSI12_i4:
- mov.l @r5,r0
- mov.l @(4,r5),r1
- mov.l @(8,r5),r2
- mov.l r0,@r4
- mov.l r1,@(4,r4)
- rts
- mov.l r2,@(8,r4)
diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S
deleted file mode 100644
index 80ea53dd34f6dd..00000000000000
--- a/arch/sh/lib/strlen.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: strlen.S,v 1.2 2001/06/29 14:07:15 gniibe Exp $
- *
- * "strlen" implementation of SuperH
- *
- * Copyright (C) 1999 Kaz Kojima
- *
- */
-
-/* size_t strlen (const char *s) */
-
-#include <linux/linkage.h>
-ENTRY(strlen)
- mov r4,r0
- and #3,r0
- tst r0,r0
- bt/s 1f
- mov #0,r2
-
- add #-1,r0
- shll2 r0
- shll r0
- braf r0
- nop
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
-1:
- mov #0,r3
-2:
- mov.l @r4+,r1
- cmp/str r3,r1
- bf/s 2b
- add #4,r2
-
- add #-4,r2
-#ifndef __LITTLE_ENDIAN__
- swap.b r1,r1
- swap.w r1,r1
- swap.b r1,r1
-#endif
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt 8f
- add #1,r2
-8:
- rts
- mov r2,r0
diff --git a/arch/sh/lib/udiv_qrnnd.S b/arch/sh/lib/udiv_qrnnd.S
deleted file mode 100644
index 28938daccd6b44..00000000000000
--- a/arch/sh/lib/udiv_qrnnd.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- /* r0: rn r1: qn */ /* r0: n1 r4: n0 r5: d r6: d1 */ /* r2: __m */
- /* n1 < d, but n1 might be larger than d1. */
- .global __udiv_qrnnd_16
- .balign 8
-__udiv_qrnnd_16:
- div0u
- cmp/hi r6,r0
- bt .Lots
- .rept 16
- div1 r6,r0
- .endr
- extu.w r0,r1
- bt 0f
- add r6,r0
-0: rotcl r1
- mulu.w r1,r5
- xtrct r4,r0
- swap.w r0,r0
- sts macl,r2
- cmp/hs r2,r0
- sub r2,r0
- bt 0f
- addc r5,r0
- add #-1,r1
- bt 0f
-1: add #-1,r1
- rts
- add r5,r0
- .balign 8
-.Lots:
- sub r5,r0
- swap.w r4,r1
- xtrct r0,r1
- clrt
- mov r1,r0
- addc r5,r0
- mov #-1,r1
- bf/s 1b
- shlr16 r1
-0: rts
- nop
diff --git a/arch/sh/lib/udivsi3.S b/arch/sh/lib/udivsi3.S
deleted file mode 100644
index 09ed1f9deb2ea7..00000000000000
--- a/arch/sh/lib/udivsi3.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
- .balign 4
- .global __udivsi3
- .type __udivsi3, @function
-div8:
- div1 r5,r4
-div7:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx4:
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- rts; div1 r5,r4
-
-__udivsi3:
- sts.l pr,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- bf/s large_divisor
- div0u
- swap.w r4,r0
- shlr16 r4
- bsr div8
- shll16 r5
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div8
- swap.w r4,r4
- bsr div7
- div1 r5,r4
- lds.l @r15+,pr
- xtrct r4,r0
- swap.w r0,r0
- rotcl r0
- rts
- shlr16 r5
-
-large_divisor:
- mov #0,r0
- xtrct r4,r0
- xtrct r0,r4
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- lds.l @r15+,pr
- rts
- rotcl r0
diff --git a/arch/sh/lib/udivsi3_i4i-Os.S b/arch/sh/lib/udivsi3_i4i-Os.S
deleted file mode 100644
index fa4e4dff3da142..00000000000000
--- a/arch/sh/lib/udivsi3_i4i-Os.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
- *
- * Copyright (C) 2006 Free Software Foundation, Inc.
- */
-
-/* Moderately Space-optimized libgcc routines for the Renesas SH /
- STMicroelectronics ST40 CPUs.
- Contributed by J"orn Rennecke joern.rennecke@st.com. */
-
-/* Size: 186 bytes jointly for udivsi3_i4i and sdivsi3_i4i
- sh4-200 run times:
- udiv small divisor: 55 cycles
- udiv large divisor: 52 cycles
- sdiv small divisor, positive result: 59 cycles
- sdiv large divisor, positive result: 56 cycles
- sdiv small divisor, negative result: 65 cycles (*)
- sdiv large divisor, negative result: 62 cycles (*)
- (*): r2 is restored in the rts delay slot and has a lingering latency
- of two more cycles. */
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
- .type __sdivsi3_i4i, @function
-__udivsi3_i4i:
- sts pr,r1
- mov.l r4,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- swap.w r4,r0
- shlr16 r4
- bf/s large_divisor
- div0u
- mov.l r5,@-r15
- shll16 r5
-sdiv_small_divisor:
- div1 r5,r4
- bsr div6
- div1 r5,r4
- div1 r5,r4
- bsr div6
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div7
- swap.w r4,r4
- div1 r5,r4
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- mov.l @r15+,r5
- swap.w r0,r0
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-div7:
- div1 r5,r4
-div6:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx3:
- rotcl r0
- div1 r5,r4
- rotcl r0
- div1 r5,r4
- rotcl r0
- rts
- div1 r5,r4
-
-large_divisor:
- mov.l r5,@-r15
-sdiv_large_divisor:
- xor r4,r0
- .rept 4
- rotcl r0
- bsr divx3
- div1 r5,r4
- .endr
- mov.l @r15+,r5
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.l r5,@-r15
- bt/s pos_divisor
- cmp/pz r4
- neg r5,r5
- extu.w r5,r0
- bt/s neg_result
- cmp/eq r5,r0
- neg r4,r4
-pos_result:
- swap.w r4,r0
- bra sdiv_check_divisor
- sts pr,r1
-pos_divisor:
- extu.w r5,r0
- bt/s pos_result
- cmp/eq r5,r0
- neg r4,r4
-neg_result:
- mova negate_result,r0
- ;
- mov r0,r1
- swap.w r4,r0
- lds r2,macl
- sts pr,r2
-sdiv_check_divisor:
- shlr16 r4
- bf/s sdiv_large_divisor
- div0u
- bra sdiv_small_divisor
- shll16 r5
- .balign 4
-negate_result:
- neg r0,r0
- jmp @r2
- sts macl,r2
diff --git a/arch/sh/lib/udivsi3_i4i.S b/arch/sh/lib/udivsi3_i4i.S
deleted file mode 100644
index 6944eb6b4a75ca..00000000000000
--- a/arch/sh/lib/udivsi3_i4i.S
+++ /dev/null
@@ -1,645 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-/* This code used shld, thus is not suitable for SH1 / SH2. */
-
-/* Signed / unsigned division without use of FPU, optimized for SH4.
- Uses a lookup table for divisors in the range -128 .. +128, and
- div1 with case distinction for larger divisors in three more ranges.
- The code is lumped together with the table to allow the use of mova. */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define L_LSB 0
-#define L_LSWMSB 1
-#define L_MSWLSB 2
-#else
-#define L_LSB 3
-#define L_LSWMSB 2
-#define L_MSWLSB 1
-#endif
-
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
-__udivsi3_i4i:
- mov.w c128_w, r1
- div0u
- mov r4,r0
- shlr8 r0
- cmp/hi r1,r5
- extu.w r5,r1
- bf udiv_le128
- cmp/eq r5,r1
- bf udiv_ge64k
- shlr r0
- mov r5,r1
- shll16 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
- div1 r5,r0
- div1 r5,r0
- bra udiv_25
- div1 r5,r0
-
-div_le128:
- mova div_table_ix,r0
- bra div_le128_2
- mov.b @(r0,r5),r1
-udiv_le128:
- mov.l r4,@-r15
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mov.l r5,@-r15
-div_le128_2:
- mova div_table_inv,r0
- mov.l @(r0,r1),r1
- mov r5,r0
- tst #0xfe,r0
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- bt/s div_by_1
- mov r4,r0
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- rts
- shld r1,r0
-
-div_by_1_neg:
- neg r4,r0
-div_by_1:
- mov.l @r15+,r5
- rts
- mov.l @r15+,r4
-
-div_ge64k:
- bt/s div_r8
- div0u
- shll8 r5
- bra div_ge64k_2
- div1 r5,r0
-udiv_ge64k:
- cmp/hi r0,r5
- mov r5,r1
- bt udiv_r8
- shll8 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
-div_ge64k_2:
- div1 r5,r0
- mov.l zero_l,r1
- .rept 4
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_end
- xor r4,r0
-
-div_r8:
- shll16 r4
- bra div_r8_2
- shll8 r4
-udiv_r8:
- mov.l r4,@-r15
- shll16 r4
- clrt
- shll8 r4
- mov.l r5,@-r15
-div_r8_2:
- rotcl r4
- mov r0,r1
- div1 r5,r1
- mov r4,r0
- rotcl r0
- mov r5,r4
- div1 r5,r1
- .rept 5
- rotcl r0; div1 r5,r1
- .endr
- rotcl r0
- mov.l @r15+,r5
- div1 r4,r1
- mov.l @r15+,r4
- rts
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
- .type __sdivsi3_i4i, @function
- /* This is link-compatible with a __sdivsi3 call,
- but we effectively clobber only r1. */
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.w c128_w, r1
- bt/s pos_divisor
- cmp/pz r4
- mov.l r5,@-r15
- neg r5,r5
- bt/s neg_result
- cmp/hi r1,r5
- neg r4,r4
-pos_result:
- extu.w r5,r0
- bf div_le128
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k
- cmp/hi r0,r5
- div0u
- shll16 r5
- div1 r5,r0
- div1 r5,r0
- div1 r5,r0
-udiv_25:
- mov.l zero_l,r1
- div1 r5,r0
- div1 r5,r0
- mov.l r1,@-r15
- .rept 3
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r0
- mov.l @r15+,r5
- or r4,r0
- mov.l @r15+,r4
- rts
- rotcl r0
-
-div_le128_neg:
- tst #0xfe,r0
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mova div_table_inv,r0
- bt/s div_by_1_neg
- mov.l @(r0,r1),r1
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- shld r1,r0
- rts
- neg r0,r0
-
-pos_divisor:
- mov.l r5,@-r15
- bt/s pos_result
- cmp/hi r1,r5
- neg r4,r4
-neg_result:
- extu.w r5,r0
- bf div_le128_neg
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k_neg
- cmp/hi r0,r5
- div0u
- mov.l zero_l,r1
- shll16 r5
- div1 r5,r0
- mov.l r1,@-r15
- .rept 7
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_neg_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r1
- mov.l @r15+,r5
- or r4,r1
-div_r8_neg_end:
- mov.l @r15+,r4
- rotcl r1
- rts
- neg r1,r0
-
-div_ge64k_neg:
- bt/s div_r8_neg
- div0u
- shll8 r5
- mov.l zero_l,r1
- .rept 6
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_neg_end
- xor r4,r0
-
-c128_w:
- .word 128
-
-div_r8_neg:
- clrt
- shll16 r4
- mov r4,r1
- shll8 r1
- mov r5,r4
- .rept 7
- rotcl r1; div1 r5,r0
- .endr
- mov.l @r15+,r5
- rotcl r1
- bra div_r8_neg_end
- div1 r4,r0
-
-m256_w:
- .word 0xff00
-/* This table has been generated by divtab-sh4.c. */
- .balign 4
-div_table_clz:
- .byte 0
- .byte 1
- .byte 0
- .byte -1
- .byte -1
- .byte -2
- .byte -2
- .byte -2
- .byte -2
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
-/* Lookup table translating positive divisor to index into table of
- normalized inverse. N.B. the '0' entry is also the last entry of the
- previous table, and causes an unaligned access for division by zero. */
-div_table_ix:
- .byte -6
- .byte -128
- .byte -128
- .byte 0
- .byte -128
- .byte -64
- .byte 0
- .byte 64
- .byte -128
- .byte -96
- .byte -64
- .byte -32
- .byte 0
- .byte 32
- .byte 64
- .byte 96
- .byte -128
- .byte -112
- .byte -96
- .byte -80
- .byte -64
- .byte -48
- .byte -32
- .byte -16
- .byte 0
- .byte 16
- .byte 32
- .byte 48
- .byte 64
- .byte 80
- .byte 96
- .byte 112
- .byte -128
- .byte -120
- .byte -112
- .byte -104
- .byte -96
- .byte -88
- .byte -80
- .byte -72
- .byte -64
- .byte -56
- .byte -48
- .byte -40
- .byte -32
- .byte -24
- .byte -16
- .byte -8
- .byte 0
- .byte 8
- .byte 16
- .byte 24
- .byte 32
- .byte 40
- .byte 48
- .byte 56
- .byte 64
- .byte 72
- .byte 80
- .byte 88
- .byte 96
- .byte 104
- .byte 112
- .byte 120
- .byte -128
- .byte -124
- .byte -120
- .byte -116
- .byte -112
- .byte -108
- .byte -104
- .byte -100
- .byte -96
- .byte -92
- .byte -88
- .byte -84
- .byte -80
- .byte -76
- .byte -72
- .byte -68
- .byte -64
- .byte -60
- .byte -56
- .byte -52
- .byte -48
- .byte -44
- .byte -40
- .byte -36
- .byte -32
- .byte -28
- .byte -24
- .byte -20
- .byte -16
- .byte -12
- .byte -8
- .byte -4
- .byte 0
- .byte 4
- .byte 8
- .byte 12
- .byte 16
- .byte 20
- .byte 24
- .byte 28
- .byte 32
- .byte 36
- .byte 40
- .byte 44
- .byte 48
- .byte 52
- .byte 56
- .byte 60
- .byte 64
- .byte 68
- .byte 72
- .byte 76
- .byte 80
- .byte 84
- .byte 88
- .byte 92
- .byte 96
- .byte 100
- .byte 104
- .byte 108
- .byte 112
- .byte 116
- .byte 120
- .byte 124
- .byte -128
-/* 1/64 .. 1/127, normalized. There is an implicit leading 1 in bit 32. */
- .balign 4
-zero_l:
- .long 0x0
- .long 0xF81F81F9
- .long 0xF07C1F08
- .long 0xE9131AC0
- .long 0xE1E1E1E2
- .long 0xDAE6076C
- .long 0xD41D41D5
- .long 0xCD856891
- .long 0xC71C71C8
- .long 0xC0E07039
- .long 0xBACF914D
- .long 0xB4E81B4F
- .long 0xAF286BCB
- .long 0xA98EF607
- .long 0xA41A41A5
- .long 0x9EC8E952
- .long 0x9999999A
- .long 0x948B0FCE
- .long 0x8F9C18FA
- .long 0x8ACB90F7
- .long 0x86186187
- .long 0x81818182
- .long 0x7D05F418
- .long 0x78A4C818
- .long 0x745D1746
- .long 0x702E05C1
- .long 0x6C16C16D
- .long 0x68168169
- .long 0x642C8591
- .long 0x60581606
- .long 0x5C9882BA
- .long 0x58ED2309
-div_table_inv:
- .long 0x55555556
- .long 0x51D07EAF
- .long 0x4E5E0A73
- .long 0x4AFD6A06
- .long 0x47AE147B
- .long 0x446F8657
- .long 0x41414142
- .long 0x3E22CBCF
- .long 0x3B13B13C
- .long 0x38138139
- .long 0x3521CFB3
- .long 0x323E34A3
- .long 0x2F684BDB
- .long 0x2C9FB4D9
- .long 0x29E4129F
- .long 0x27350B89
- .long 0x24924925
- .long 0x21FB7813
- .long 0x1F7047DD
- .long 0x1CF06ADB
- .long 0x1A7B9612
- .long 0x18118119
- .long 0x15B1E5F8
- .long 0x135C8114
- .long 0x11111112
- .long 0xECF56BF
- .long 0xC9714FC
- .long 0xA6810A7
- .long 0x8421085
- .long 0x624DD30
- .long 0x4104105
- .long 0x2040811
- /* maximum error: 0.987342 scaled: 0.921875*/
diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile
deleted file mode 100644
index ba06e42c4a58c9..00000000000000
--- a/arch/sh/math-emu/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := math.o
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
deleted file mode 100644
index cdaef6501d764a..00000000000000
--- a/arch/sh/math-emu/math.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * arch/sh/math-emu/math.c
- *
- * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <linux/perf_event.h>
-
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include "sfp-util.h"
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-#include <math-emu/double.h>
-
-#define FPUL (fregs->fpul)
-#define FPSCR (fregs->fpscr)
-#define FPSCR_RM (FPSCR&3)
-#define FPSCR_DN ((FPSCR>>18)&1)
-#define FPSCR_PR ((FPSCR>>19)&1)
-#define FPSCR_SZ ((FPSCR>>20)&1)
-#define FPSCR_FR ((FPSCR>>21)&1)
-#define FPSCR_MASK 0x003fffffUL
-
-#define BANK(n) (n^(FPSCR_FR?16:0))
-#define FR ((unsigned long*)(fregs->fp_regs))
-#define FR0 (FR[BANK(0)])
-#define FRn (FR[BANK(n)])
-#define FRm (FR[BANK(m)])
-#define DR ((unsigned long long*)(fregs->fp_regs))
-#define DRn (DR[BANK(n)/2])
-#define DRm (DR[BANK(m)/2])
-
-#define XREG(n) (n^16)
-#define XFn (FR[BANK(XREG(n))])
-#define XFm (FR[BANK(XREG(m))])
-#define XDn (DR[BANK(XREG(n))/2])
-#define XDm (DR[BANK(XREG(m))/2])
-
-#define R0 (regs->regs[0])
-#define Rn (regs->regs[n])
-#define Rm (regs->regs[m])
-
-#define MWRITE(d,a) ({if(put_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-#define MREAD(d,a) ({if(get_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-
-#define PACK_S(r,f) FP_PACK_SP(&r,f)
-#define UNPACK_S(f,r) FP_UNPACK_SP(f,&r)
-#define PACK_D(r,f) \
- {u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
-#define UNPACK_D(f,r) \
- {u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
-
-// 2 args instructions.
-#define BOTH_PRmn(op,x) \
- FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
-
-#define CMP_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
-#define EQ_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
-#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
-
-static int
-fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP) > 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
-
- return 0;
-}
-
-static int
-fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP /*EQ*/) == 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
- return 0;
-}
-
-#define ARITH_X(SZ,OP,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_##OP##_##SZ(Fr, Fn, Fm); \
- PACK_##SZ(N, Fr); }while(0)
-
-static int
-fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, ADD);
- return 0;
-}
-
-static int
-fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, SUB);
- return 0;
-}
-
-static int
-fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, MUL);
- return 0;
-}
-
-static int
-fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, DIV);
- return 0;
-}
-
-static int
-fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fr);
- FP_DECL_S(Ft);
- FP_DECL_S(F0);
- FP_DECL_S(Fm);
- FP_DECL_S(Fn);
- UNPACK_S(F0, FR0);
- UNPACK_S(Fm, FRm);
- UNPACK_S(Fn, FRn);
- FP_MUL_S(Ft, Fm, F0);
- FP_ADD_S(Fr, Fn, Ft);
- PACK_S(FRn, Fr);
- return 0;
-}
-
-// to process fmov's extension (odd n for DR access XD).
-#define FMOV_EXT(x) if(x&1) x+=16-1
-
-static int
-fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + R0 + 4);
- n++;
- MREAD(FRn, Rm + R0);
- } else {
- MREAD(FRn, Rm + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- } else {
- MREAD(FRn, Rm);
- }
-
- return 0;
-}
-
-static int
-fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- Rm += 8;
- } else {
- MREAD(FRn, Rm);
- Rm += 4;
- }
-
- return 0;
-}
-
-static int
-fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + R0 + 4);
- m++;
- MWRITE(FRm, Rn + R0);
- } else {
- MWRITE(FRm, Rn + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- Rn -= 8;
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- Rn -= 4;
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- FMOV_EXT(n);
- DRn = DRm;
- } else {
- FRn = FRm;
- }
-
- return 0;
-}
-
-static int
-fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- return -EINVAL;
-}
-
-// 1 arg instructions.
-#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
- { printk( #i " not yet done.\n"); return 0; }
-
-NOTYETn(ftrv)
-NOTYETn(fsqrt)
-NOTYETn(fipr)
-NOTYETn(fsca)
-NOTYETn(fsrra)
-
-#define EMU_FLOAT_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
- PACK_##SZ(N, Fn); }while(0)
-static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FLOAT_X(D, DRn);
- else
- EMU_FLOAT_X(S, FRn);
-
- return 0;
-}
-
-#define EMU_FTRC_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fn, N); \
- FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
-static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FTRC_X(D, DRn);
- else
- EMU_FTRC_X(S, FRn);
-
- return 0;
-}
-
-static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fn);
- FP_DECL_D(Fr);
- UNPACK_S(Fn, FPUL);
- FP_CONV(D, S, 2, 1, Fr, Fn);
- PACK_D(DRn, Fr);
- return 0;
-}
-
-static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_D(Fn);
- FP_DECL_S(Fr);
- UNPACK_D(Fn, DRn);
- FP_CONV(S, D, 1, 2, Fr, Fn);
- PACK_S(FPUL, Fr);
- return 0;
-}
-
-static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
-{
- FPSCR ^= flag;
- return 0;
-}
-
-static int fsts(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = FPUL;
- return 0;
-}
-
-static int flds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FPUL = FRn;
- return 0;
-}
-
-static int fneg(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fabs(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fld0(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = 0;
- return 0;
-}
-
-static int fld1(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
- return 0;
-}
-
-static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
-{
- return -EINVAL;
-}
-
-/// Instruction decoders.
-
-static int id_fxfd(struct sh_fpu_soft_struct *, int);
-static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
-
-static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
- fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
- fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
-};
-
-static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
- fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
- fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
- fmov_reg_reg, id_fnxd, fmac, fnop_mn};
-
-static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
-{
- const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
- switch (x & 3) {
- case 3:
- fxchg(fregs, flag[x >> 2]);
- break;
- case 1:
- ftrv(fregs, x - 1);
- break;
- default:
- fsca(fregs, x);
- }
- return 0;
-}
-
-static int
-id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
-{
- return (fnxd[x])(fregs, n);
-}
-
-static int
-id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
- return (fnmx[x])(fregs, regs, m, n);
-}
-
-static int
-id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = ((code >> 8) & 0xf);
- unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
-
- switch (code & 0xf0ff) {
- case 0x005a:
- case 0x006a:
- Rn = *reg;
- break;
- case 0x405a:
- case 0x406a:
- *reg = Rn;
- break;
- case 0x4052:
- case 0x4062:
- Rn -= 4;
- MWRITE(*reg, Rn);
- break;
- case 0x4056:
- case 0x4066:
- MREAD(*reg, Rn);
- Rn += 4;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
-{
- if ((code & 0xf000) == 0xf000)
- return id_fnmx(fregs, regs, code);
- else
- return id_sys(fregs, regs, code);
-}
-
-/**
- * fpu_init - Initialize FPU registers
- * @fpu: Pointer to software emulated FPU registers.
- */
-static void fpu_init(struct sh_fpu_soft_struct *fpu)
-{
- int i;
-
- fpu->fpscr = FPSCR_INIT;
- fpu->fpul = 0;
-
- for (i = 0; i < 16; i++) {
- fpu->fp_regs[i] = 0;
- fpu->xfp_regs[i]= 0;
- }
-}
-
-/**
- * do_fpu_inst - Handle reserved instructions for FPU emulation
- * @inst: instruction code.
- * @regs: registers on stack.
- */
-int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
- struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
-
- if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
- /* initialize once. */
- fpu_init(fpu);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- }
-
- return fpu_emulate(inst, fpu, regs);
-}
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
deleted file mode 100644
index 784f541344f36d..00000000000000
--- a/arch/sh/math-emu/sfp-util.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * These are copied from glibc/stdlib/longlong.h
- */
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) + (bl); \
- (sh) = (ah) + (bh) + (__x < (al)); \
- (sl) = __x; \
- } while (0)
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) - (bl); \
- (sh) = (ah) - (bh) - (__x > (al)); \
- (sl) = __x; \
- } while (0)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
- : "=r" ((u32)(w1)), "=r" ((u32)(w0)) \
- : "r" ((u32)(u)), "r" ((u32)(v)) \
- : "macl", "mach")
-
-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-#define udiv_qrnnd(q, r, n1, n0, d) \
- do { \
- UWtype __d1, __d0, __q1, __q0; \
- UWtype __r1, __r0, __m; \
- __d1 = __ll_highpart (d); \
- __d0 = __ll_lowpart (d); \
- \
- __r1 = (n1) % __d1; \
- __q1 = (n1) / __d1; \
- __m = (UWtype) __q1 * __d0; \
- __r1 = __r1 * __ll_B | __ll_highpart (n0); \
- if (__r1 < __m) \
- { \
- __q1--, __r1 += (d); \
- if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
- if (__r1 < __m) \
- __q1--, __r1 += (d); \
- } \
- __r1 -= __m; \
- \
- __r0 = __r1 % __d1; \
- __q0 = __r1 / __d1; \
- __m = (UWtype) __q0 * __d0; \
- __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
- if (__r0 < __m) \
- { \
- __q0--, __r0 += (d); \
- if (__r0 >= (d)) \
- if (__r0 < __m) \
- __q0--, __r0 += (d); \
- } \
- __r0 -= __m; \
- \
- (q) = (UWtype) __q1 * __ll_B | __q0; \
- (r) = __r0; \
- } while (0)
-
-#define abort() return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
deleted file mode 100644
index 411fdc0901f7ea..00000000000000
--- a/arch/sh/mm/Kconfig
+++ /dev/null
@@ -1,254 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Memory management options"
-
-config MMU
- bool "Support for memory management hardware"
- depends on !CPU_SH2
- default y
- help
- Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
- boot on these systems, this option must not be set.
-
- On other systems (such as the SH-3 and 4) where an MMU exists,
- turning this off will boot the kernel on these machines with the
- MMU implicitly switched off.
-
-config PAGE_OFFSET
- hex
- default "0x80000000" if MMU
- default "0x00000000"
-
-config ARCH_FORCE_MAX_ORDER
- int "Maximum zone order"
- range 9 64 if PAGE_SIZE_16KB
- default "9" if PAGE_SIZE_16KB
- range 7 64 if PAGE_SIZE_64KB
- default "7" if PAGE_SIZE_64KB
- range 11 64
- default "14" if !MMU
- default "11"
- help
- The kernel memory allocator divides physically contiguous memory
- blocks into "zones", where each zone is a power of two number of
- pages. This option selects the largest power of two that the kernel
- keeps in the memory allocator. If you need to allocate very large
- blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
-
- The page size is not necessarily 4KB. Keep this in mind when
- choosing a value for this option.
-
-config MEMORY_START
- hex "Physical memory start address"
- default "0x08000000"
- help
- Computers built with Hitachi SuperH processors always
- map the ROM starting at address zero. But the processor
- does not specify the range that RAM takes.
-
- The physical memory (RAM) start address will be automatically
- set to 08000000. Other platforms, such as the Solution Engine
- boards typically map RAM at 0C000000.
-
- Tweak this only when porting to a new machine which does not
- already have a defconfig. Changing it from the known correct
- value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
- hex "Physical memory size"
- default "0x04000000"
- help
- This sets the default memory size assumed by your SH kernel. It can
- be overridden as normal by the 'mem=' argument on the kernel command
- line. If unsure, consult your board specifications or just leave it
- as 0x04000000 which was the default value before this became
- configurable.
-
-# Physical addressing modes
-
-config 29BIT
- def_bool !32BIT
- select UNCACHED_MAPPING
-
-config 32BIT
- bool
- default !MMU
-
-config PMB
- bool "Support 32-bit physical addressing through PMB"
- depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
- select 32BIT
- select UNCACHED_MAPPING
- help
- If you say Y here, physical addressing will be extended to
- 32-bits through the SH-4A PMB. If this is not set, legacy
- 29-bit physical addressing will be used.
-
-config X2TLB
- def_bool y
- depends on (CPU_SHX2 || CPU_SHX3) && MMU
-
-config VSYSCALL
- bool "Support vsyscall page"
- depends on MMU && (CPU_SH3 || CPU_SH4)
- default y
- help
- This will enable support for the kernel mapping a vDSO page
- in process space, and subsequently handing down the entry point
- to the libc through the ELF auxiliary vector.
-
- From the kernel side this is used for the signal trampoline.
- For systems with an MMU that can afford to give up a page,
- (the default value) say Y.
-
-config NUMA
- bool "Non-Uniform Memory Access (NUMA) Support"
- depends on MMU && SYS_SUPPORTS_NUMA
- select ARCH_WANT_NUMA_VARIABLE_LOCALITY
- default n
- help
- Some SH systems have many various memories scattered around
- the address space, each with varying latencies. This enables
- support for these blocks by binding them to nodes and allowing
- memory policies to be used for prioritizing and controlling
- allocation behaviour.
-
-config NODES_SHIFT
- int
- default "3" if CPU_SUBTYPE_SHX3
- default "1"
- depends on NUMA
-
-config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on !NUMA
-
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
-config ARCH_SPARSEMEM_DEFAULT
- def_bool y
-
-config ARCH_SELECT_MEMORY_MODEL
- def_bool y
-
-config ARCH_MEMORY_PROBE
- def_bool y
- depends on MEMORY_HOTPLUG
-
-config IOREMAP_FIXED
- def_bool y
- depends on X2TLB
-
-config UNCACHED_MAPPING
- bool
-
-config HAVE_SRAM_POOL
- bool
- select GENERIC_ALLOCATOR
-
-choice
- prompt "Kernel page size"
- default PAGE_SIZE_4KB
-
-config PAGE_SIZE_4KB
- bool "4kB"
- help
- This is the default page size used by all SuperH CPUs.
-
-config PAGE_SIZE_8KB
- bool "8kB"
- depends on !MMU || X2TLB
- help
- This enables 8kB pages as supported by SH-X2 and later MMUs.
-
-config PAGE_SIZE_16KB
- bool "16kB"
- depends on !MMU
- help
- This enables 16kB pages on MMU-less SH systems.
-
-config PAGE_SIZE_64KB
- bool "64kB"
- depends on !MMU || CPU_SH4
- help
- This enables support for 64kB pages, possible on all SH-4
- CPUs and later.
-
-endchoice
-
-choice
- prompt "HugeTLB page size"
- depends on HUGETLB_PAGE
- default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
- default HUGETLB_PAGE_SIZE_64K
-
-config HUGETLB_PAGE_SIZE_64K
- bool "64kB"
- depends on !PAGE_SIZE_64KB
-
-config HUGETLB_PAGE_SIZE_256K
- bool "256kB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_1MB
- bool "1MB"
-
-config HUGETLB_PAGE_SIZE_4MB
- bool "4MB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_64MB
- bool "64MB"
- depends on X2TLB
-
-endchoice
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-endmenu
-
-menu "Cache configuration"
-
-config SH7705_CACHE_32KB
- bool "Enable 32KB cache size for SH7705"
- depends on CPU_SUBTYPE_SH7705
- default y
-
-choice
- prompt "Cache mode"
- default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
- default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
-
-config CACHE_WRITEBACK
- bool "Write-back"
-
-config CACHE_WRITETHROUGH
- bool "Write-through"
- help
- Selecting this option will configure the caches in write-through
- mode, as opposed to the default write-back configuration.
-
- Since there's sill some aliasing issues on SH-4, this option will
- unfortunately still require the majority of flushing functions to
- be implemented to deal with aliasing.
-
- If unsure, say N.
-
-config CACHE_OFF
- bool "Off"
-
-endchoice
-
-endmenu
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
deleted file mode 100644
index f69ddc70b14658..00000000000000
--- a/arch/sh/mm/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y := alignment.o cache.o init.o consistent.o mmap.o
-
-cacheops-$(CONFIG_CPU_J2) := cache-j2.o
-cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o
-cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
-cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
-cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
-cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o
-
-obj-y += $(cacheops-y)
-
-mmu-y := nommu.o extable_32.o
-mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \
- pgtable.o tlbex_32.o tlbflush_32.o
-
-obj-y += $(mmu-y)
-
-debugfs-y := asids-debugfs.o
-ifndef CONFIG_CACHE_OFF
-debugfs-$(CONFIG_CPU_SH4) += cache-debugfs.o
-endif
-
-ifdef CONFIG_MMU
-debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o
-tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
-obj-y += $(tlb-y)
-endif
-
-obj-$(CONFIG_DEBUG_FS) += $(debugfs-y)
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PMB) += pmb.o
-obj-$(CONFIG_NUMA) += numa.o
-obj-$(CONFIG_IOREMAP_FIXED) += ioremap_fixed.o
-obj-$(CONFIG_UNCACHED_MAPPING) += uncached.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
-
-GCOV_PROFILE_pmb.o := n
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
deleted file mode 100644
index 3a76a766f4232c..00000000000000
--- a/arch/sh/mm/alignment.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Alignment access counters and corresponding user-space interfaces.
- *
- * Copyright (C) 2009 ST Microelectronics
- * Copyright (C) 2009 - 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-#include <linux/ratelimit.h>
-#include <asm/alignment.h>
-#include <asm/processor.h>
-
-static unsigned long se_user;
-static unsigned long se_sys;
-static unsigned long se_half;
-static unsigned long se_word;
-static unsigned long se_dword;
-static unsigned long se_multi;
-/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
- valid! */
-static int se_usermode = UM_WARN | UM_FIXUP;
-/* 0: no warning 1: print a warning message, disabled by default */
-static int se_kernmode_warn;
-
-core_param(alignment, se_usermode, int, 0600);
-
-void inc_unaligned_byte_access(void)
-{
- se_half++;
-}
-
-void inc_unaligned_word_access(void)
-{
- se_word++;
-}
-
-void inc_unaligned_dword_access(void)
-{
- se_dword++;
-}
-
-void inc_unaligned_multi_access(void)
-{
- se_multi++;
-}
-
-void inc_unaligned_user_access(void)
-{
- se_user++;
-}
-
-void inc_unaligned_kernel_access(void)
-{
- se_sys++;
-}
-
-/*
- * This defaults to the global policy which can be set from the command
- * line, while processes can overload their preferences via prctl().
- */
-unsigned int unaligned_user_action(void)
-{
- unsigned int action = se_usermode;
-
- if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
- action &= ~UM_FIXUP;
- action |= UM_SIGNAL;
- }
-
- if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
- action &= ~UM_WARN;
-
- return action;
-}
-
-int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
-{
- return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
- (unsigned int __user *)addr);
-}
-
-int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
-{
- tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
- (val & SH_THREAD_UAC_MASK);
- return 0;
-}
-
-void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
- struct pt_regs *regs)
-{
- if (user_mode(regs) && (se_usermode & UM_WARN))
- pr_notice_ratelimited("Fixing up unaligned userspace access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
- else if (se_kernmode_warn)
- pr_notice_ratelimited("Fixing up unaligned kernel access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
-}
-
-static const char *se_usermode_action[] = {
- "ignored",
- "warn",
- "fixup",
- "fixup+warn",
- "signal",
- "signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "User:\t\t%lu\n", se_user);
- seq_printf(m, "System:\t\t%lu\n", se_sys);
- seq_printf(m, "Half:\t\t%lu\n", se_half);
- seq_printf(m, "Word:\t\t%lu\n", se_word);
- seq_printf(m, "DWord:\t\t%lu\n", se_dword);
- seq_printf(m, "Multi:\t\t%lu\n", se_multi);
- seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
- se_usermode_action[se_usermode]);
- seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
- se_kernmode_warn ? "+warn" : "");
- return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file,
- const char __user *buffer, size_t count, loff_t *pos)
-{
- int *data = pde_data(file_inode(file));
- char mode;
-
- if (count > 0) {
- if (get_user(mode, buffer))
- return -EFAULT;
- if (mode >= '0' && mode <= '5')
- *data = mode - '0';
- }
- return count;
-}
-
-static const struct proc_ops alignment_proc_ops = {
- .proc_open = alignment_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = alignment_proc_write,
-};
-
-/*
- * This needs to be done after sysctl_init_bases(), otherwise sys/ will be
- * overwritten. Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
- struct proc_dir_entry *dir, *res;
-
- dir = proc_mkdir("cpu", NULL);
- if (!dir)
- return -ENOMEM;
-
- res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_usermode);
- if (!res)
- return -ENOMEM;
-
- res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_kernmode_warn);
- if (!res)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(alignment_init);
diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c
deleted file mode 100644
index d16d6f5ec77499..00000000000000
--- a/arch/sh/mm/asids-debugfs.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * debugfs ops for process ASIDs
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2008 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- * Provides a debugfs file that lists out the ASIDs currently associated
- * with the processes.
- *
- * In the SH-5 case, if the DM.PC register is examined through the debug
- * link, this shows ASID + PC. To make use of this, the PID->ASID
- * relationship needs to be known. This is primarily for debugging.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-
-static int asids_debugfs_show(struct seq_file *file, void *iter)
-{
- struct task_struct *p;
-
- read_lock(&tasklist_lock);
-
- for_each_process(p) {
- int pid = p->pid;
-
- if (unlikely(!pid))
- continue;
-
- if (p->mm)
- seq_printf(file, "%5d : %04lx\n", pid,
- cpu_asid(smp_processor_id(), p->mm));
- }
-
- read_unlock(&tasklist_lock);
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(asids_debugfs);
-
-static int __init asids_debugfs_init(void)
-{
- debugfs_create_file("asids", S_IRUSR, arch_debugfs_dir, NULL,
- &asids_debugfs_fops);
- return 0;
-}
-device_initcall(asids_debugfs_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
deleted file mode 100644
index b0f185169dfa0c..00000000000000
--- a/arch/sh/mm/cache-debugfs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * debugfs ops for the L1 cache
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-enum cache_type {
- CACHE_TYPE_ICACHE,
- CACHE_TYPE_DCACHE,
- CACHE_TYPE_UNIFIED,
-};
-
-static int cache_debugfs_show(struct seq_file *file, void *iter)
-{
- unsigned int cache_type = (unsigned int)file->private;
- struct cache_info *cache;
- unsigned int waysize, way;
- unsigned long ccr;
- unsigned long addrstart = 0;
-
- /*
- * Go uncached immediately so we don't skew the results any
- * more than we already are..
- */
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- if ((ccr & CCR_CACHE_ENABLE) == 0) {
- back_to_cached();
-
- seq_printf(file, "disabled\n");
- return 0;
- }
-
- if (cache_type == CACHE_TYPE_DCACHE) {
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.dcache;
- } else {
- addrstart = CACHE_IC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.icache;
- }
-
- waysize = cache->sets;
-
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to consider..
- */
- if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
- waysize >>= 1;
-
- waysize <<= cache->entry_shift;
-
- for (way = 0; way < cache->ways; way++) {
- unsigned long addr;
- unsigned int line;
-
- seq_printf(file, "-----------------------------------------\n");
- seq_printf(file, "Way %d\n", way);
- seq_printf(file, "-----------------------------------------\n");
-
- for (addr = addrstart, line = 0;
- addr < addrstart + waysize;
- addr += cache->linesz, line++) {
- unsigned long data = __raw_readl(addr);
-
- /* Check the V bit, ignore invalid cachelines */
- if ((data & 1) == 0)
- continue;
-
- /* U: Dirty, cache tag is 10 bits up */
- seq_printf(file, "%3d: %c 0x%lx\n",
- line, data & 2 ? 'U' : ' ',
- data & 0x1ffffc00);
- }
-
- addrstart += cache->way_incr;
- }
-
- back_to_cached();
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(cache_debugfs);
-
-static int __init cache_debugfs_init(void)
-{
- debugfs_create_file("dcache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_DCACHE, &cache_debugfs_fops);
- debugfs_create_file("icache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_ICACHE, &cache_debugfs_fops);
- return 0;
-}
-module_init(cache_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/cache-j2.c b/arch/sh/mm/cache-j2.c
deleted file mode 100644
index f277862a11f530..00000000000000
--- a/arch/sh/mm/cache-j2.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-j2.c
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/cpumask.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-#define ICACHE_ENABLE 0x1
-#define DCACHE_ENABLE 0x2
-#define CACHE_ENABLE (ICACHE_ENABLE | DCACHE_ENABLE)
-#define ICACHE_FLUSH 0x100
-#define DCACHE_FLUSH 0x200
-#define CACHE_FLUSH (ICACHE_FLUSH | DCACHE_FLUSH)
-
-u32 __iomem *j2_ccr_base;
-
-static void j2_flush_icache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | ICACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_dcache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | DCACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_both(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | CACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-void __init j2_cache_init(void)
-{
- if (!j2_ccr_base)
- return;
-
- local_flush_cache_all = j2_flush_both;
- local_flush_cache_mm = j2_flush_both;
- local_flush_cache_dup_mm = j2_flush_both;
- local_flush_cache_page = j2_flush_both;
- local_flush_cache_range = j2_flush_both;
- local_flush_dcache_page = j2_flush_dcache;
- local_flush_icache_range = j2_flush_icache;
- local_flush_icache_page = j2_flush_icache;
- local_flush_cache_sigtramp = j2_flush_icache;
-
- pr_info("Initial J2 CCR is %.8x\n", __raw_readl(j2_ccr_base));
-}
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
deleted file mode 100644
index f2b6cdbdf9320d..00000000000000
--- a/arch/sh/mm/cache-sh2.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2.c
- *
- * Copyright (C) 2002 Paul Mundt
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-static void sh2__flush_wback_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
- int way;
- for (way = 0; way < 4; way++) {
- unsigned long data = __raw_readl(addr | (way << 12));
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr | (way << 12));
- }
- }
- }
-}
-
-static void sh2__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-}
-
-static void sh2__flush_invalidate_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- /*
- * SH-2 does not support individual line invalidation, only a
- * global invalidate.
- */
- unsigned long ccr;
- unsigned long flags;
- local_irq_save(flags);
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_INVALIDATE;
- __raw_writel(ccr, SH_CCR);
-
- back_to_cached();
- local_irq_restore(flags);
-#else
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-#endif
-}
-
-void __init sh2_cache_init(void)
-{
- __flush_wback_region = sh2__flush_wback_region;
- __flush_purge_region = sh2__flush_purge_region;
- __flush_invalidate_region = sh2__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
deleted file mode 100644
index 4f7739e707a7e9..00000000000000
--- a/arch/sh/mm/cache-sh2a.c
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2a.c
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_OCACHE_PAGES 32
-#define MAX_ICACHE_PAGES 32
-
-#ifdef CONFIG_CACHE_WRITEBACK
-static void sh2a_flush_oc_line(unsigned long v, int way)
-{
- unsigned long addr = (v & 0x000007f0) | (way << 11);
- unsigned long data;
-
- data = __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr);
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
- }
-}
-#endif
-
-static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
-{
- /* Set associative bit to hit all ways */
- unsigned long addr = (v & 0x000007f0) | SH_CACHE_ASSOC;
- __raw_writel((addr & CACHE_PHYSADDR_MASK), cache_addr | addr);
-}
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- */
-static void sh2a__flush_wback_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
- int nr_ways;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- nr_ways = current_cpu_data.dcache.ways;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then flush the entire cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- begin = CACHE_OC_ADDRESS_ARRAY;
- end = begin + (nr_ways * current_cpu_data.dcache.way_size);
-
- for (v = begin; v < end; v += L1_CACHE_BYTES) {
- unsigned long data = __raw_readl(v);
- if (data & SH_CACHE_UPDATED)
- __raw_writel(data & ~SH_CACHE_UPDATED, v);
- }
- } else {
- int way;
- for (way = 0; way < nr_ways; way++) {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_flush_oc_line(v, way);
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-#endif
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- */
-static void sh2a__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-#ifdef CONFIG_CACHE_WRITEBACK
- int way;
- int nr_ways = current_cpu_data.dcache.ways;
- for (way = 0; way < nr_ways; way++)
- sh2a_flush_oc_line(v, way);
-#endif
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Invalidate the D-caches, but no write back please
- */
-static void sh2a__flush_invalidate_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then just blow the cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- */
-static void sh2a_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long v;
- unsigned long flags;
-
- start = data->addr1 & ~(L1_CACHE_BYTES-1);
- end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
-
-#ifdef CONFIG_CACHE_WRITEBACK
- sh2a__flush_wback_region((void *)start, end-start);
-#endif
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* I-Cache invalidate */
- /* If there are too many pages then just blow the cache */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = start; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-void __init sh2a_cache_init(void)
-{
- local_flush_icache_range = sh2a_flush_icache_range;
-
- __flush_wback_region = sh2a__flush_wback_region;
- __flush_purge_region = sh2a__flush_purge_region;
- __flush_invalidate_region = sh2a__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
deleted file mode 100644
index bc595982d396ee..00000000000000
--- a/arch/sh/mm/cache-sh3.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh3.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * Is this really worth it, or should we just alias this routine
- * to __flush_purge_region too?
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-
-static void sh3__flush_wback_region(void *start, int size)
-{
- unsigned long v, j;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY;
- for (j = 0; j < current_cpu_data.dcache.ways; j++) {
- unsigned long data, addr, p;
-
- p = __pa(v);
- addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
- local_irq_save(flags);
- data = __raw_readl(addr);
-
- if ((data & CACHE_PHYSADDR_MASK) ==
- (p & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr);
- local_irq_restore(flags);
- break;
- }
- local_irq_restore(flags);
- addrstart += current_cpu_data.dcache.way_incr;
- }
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh3__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long data, addr;
-
- data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
- addr = CACHE_OC_ADDRESS_ARRAY |
- (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
- __raw_writel(data, addr);
- }
-}
-
-void __init sh3_cache_init(void)
-{
- __flush_wback_region = sh3__flush_wback_region;
- __flush_purge_region = sh3__flush_purge_region;
-
- /*
- * No write back please
- *
- * Except I don't think there's any way to avoid the writeback.
- * So we just alias it to sh3__flush_purge_region(). dwmw2.
- */
- __flush_invalidate_region = sh3__flush_purge_region;
-}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
deleted file mode 100644
index 72c2e1b46c0838..00000000000000
--- a/arch/sh/mm/cache-sh4.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * arch/sh/mm/cache-sh4.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_ICACHE_PAGES 32
-
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset);
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format,
- * signal handler code and kprobes code
- */
-static void sh4_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long flags, v;
- int i;
-
- start = data->addr1;
- end = data->addr2;
-
- /* If there are too many pages then just blow away the caches */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- local_flush_cache_all(NULL);
- return;
- }
-
- /*
- * Selectively flush d-cache then invalidate the i-cache.
- * This is inefficient, so only use this for small ranges.
- */
- start &= ~(L1_CACHE_BYTES-1);
- end += L1_CACHE_BYTES-1;
- end &= ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = start; v < end; v += L1_CACHE_BYTES) {
- unsigned long icacheaddr;
- int j, n;
-
- __ocbwb(v);
-
- icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
- cpu_data->icache.entry_mask);
-
- /* Clear i-cache line valid-bit */
- n = boot_cpu_data.icache.n_aliases;
- for (i = 0; i < cpu_data->icache.ways; i++) {
- for (j = 0; j < n; j++)
- __raw_writel(0, icacheaddr + (j * PAGE_SIZE));
- icacheaddr += cpu_data->icache.way_incr;
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static inline void flush_cache_one(unsigned long start, unsigned long phys)
-{
- unsigned long flags, exec_offset = 0;
-
- /*
- * All types of SH-4 require PC to be uncached to operate on the I-cache.
- * Some types of SH-4 require PC to be uncached to operate on the D-cache.
- */
- if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
- (start < CACHE_OC_ADDRESS_ARRAY))
- exec_offset = cached_to_uncached;
-
- local_irq_save(flags);
- __flush_cache_one(start, phys, exec_offset);
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh4_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- unsigned long addr = (unsigned long)page_address(page);
-#ifndef CONFIG_SMP
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
-#endif
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (addr & shm_align_mask), page_to_phys(page));
-
- wmb();
-}
-
-/* TODO: Selective icache invalidation through IC address array.. */
-static void flush_icache_all(void)
-{
- unsigned long flags, ccr;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* Flush I-cache */
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_ICI;
- __raw_writel(ccr, SH_CCR);
-
- /*
- * back_to_cached() will take care of the barrier for us, don't add
- * another one!
- */
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static void flush_dcache_all(void)
-{
- unsigned long addr, end_addr, entry_offset;
-
- end_addr = CACHE_OC_ADDRESS_ARRAY +
- (current_cpu_data.dcache.sets <<
- current_cpu_data.dcache.entry_shift) *
- current_cpu_data.dcache.ways;
-
- entry_offset = 1 << current_cpu_data.dcache.entry_shift;
-
- for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- }
-}
-
-static void sh4_flush_cache_all(void *unused)
-{
- flush_dcache_all();
- flush_icache_all();
-}
-
-/*
- * Note : (RPC) since the caches are physically tagged, the only point
- * of flush_cache_mm for SH-4 is to get rid of aliases from the
- * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that
- * lines can stay resident so long as the virtual address they were
- * accessed with (hence cache set) is in accord with the physical
- * address (i.e. tag). It's no different here.
- *
- * Caller takes mm->mmap_lock.
- */
-static void sh4_flush_cache_mm(void *arg)
-{
- struct mm_struct *mm = arg;
-
- if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
- return;
-
- flush_dcache_all();
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDR: Virtual Address (U0 address)
- * PFN: Physical page number
- */
-static void sh4_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- struct page *page;
- unsigned long address, pfn, phys;
- int map_coherent = 0;
- pmd_t *pmd;
- pte_t *pte;
- void *vaddr;
-
- vma = data->vma;
- address = data->addr1 & PAGE_MASK;
- pfn = data->addr2;
- phys = pfn << PAGE_SHIFT;
- page = pfn_to_page(pfn);
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- pmd = pmd_off(vma->vm_mm, address);
- pte = pte_offset_kernel(pmd, address);
-
- /* If the page isn't present, there is nothing to do here. */
- if (!(pte_val(*pte) & _PAGE_PRESENT))
- return;
-
- if ((vma->vm_mm == current->active_mm))
- vaddr = NULL;
- else {
- /*
- * Use kmap_coherent or kmap_atomic to do flushes for
- * another ASID than the current one.
- */
- map_coherent = (current_cpu_data.dcache.n_aliases &&
- test_bit(PG_dcache_clean, &page->flags) &&
- page_mapcount(page));
- if (map_coherent)
- vaddr = kmap_coherent(page, address);
- else
- vaddr = kmap_atomic(page);
-
- address = (unsigned long)vaddr;
- }
-
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (address & shm_align_mask), phys);
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-
- if (vaddr) {
- if (map_coherent)
- kunmap_coherent(vaddr);
- else
- kunmap_atomic(vaddr);
- }
-}
-
-/*
- * Write back and invalidate D-caches.
- *
- * START, END: Virtual Address (U0 address)
- *
- * NOTE: We need to flush the _physical_ page entry.
- * Flushing the cache lines for U0 only isn't enough.
- * We need to flush for P1 too, which may contain aliases.
- */
-static void sh4_flush_cache_range(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long start, end;
-
- vma = data->vma;
- start = data->addr1;
- end = data->addr2;
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- /*
- * If cache is only 4k-per-way, there are never any 'aliases'. Since
- * the cache is physically tagged, the data can just be left in there.
- */
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- flush_dcache_all();
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-}
-
-/**
- * __flush_cache_one
- *
- * @addr: address in memory mapped cache array
- * @phys: P1 address to flush (has to match tags if addr has 'A' bit
- * set i.e. associative write)
- * @exec_offset: set to 0x20000000 if flush has to be executed from P2
- * region else 0x0
- *
- * The offset into the cache array implied by 'addr' selects the
- * 'colour' of the virtual address range that will be flushed. The
- * operation (purge/write-back) is selected by the lower 2 bits of
- * 'phys'.
- */
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset)
-{
- int way_count;
- unsigned long base_addr = addr;
- struct cache_info *dcache;
- unsigned long way_incr;
- unsigned long a, ea, p;
- unsigned long temp_pc;
-
- dcache = &boot_cpu_data.dcache;
- /* Write this way for better assembly. */
- way_count = dcache->ways;
- way_incr = dcache->way_incr;
-
- /*
- * Apply exec_offset (i.e. branch to P2 if required.).
- *
- * FIXME:
- *
- * If I write "=r" for the (temp_pc), it puts this in r6 hence
- * trashing exec_offset before it's been added on - why? Hence
- * "=&r" as a 'workaround'
- */
- asm volatile("mov.l 1f, %0\n\t"
- "add %1, %0\n\t"
- "jmp @%0\n\t"
- "nop\n\t"
- ".balign 4\n\t"
- "1: .long 2f\n\t"
- "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
-
- /*
- * We know there will be >=1 iteration, so write as do-while to avoid
- * pointless nead-of-loop check for 0 iterations.
- */
- do {
- ea = base_addr + PAGE_SIZE;
- a = base_addr;
- p = phys;
-
- do {
- *(volatile unsigned long *)a = p;
- /*
- * Next line: intentionally not p+32, saves an add, p
- * will do since only the cache tag bits need to
- * match.
- */
- *(volatile unsigned long *)(a+32) = p;
- a += 64;
- p += 64;
- } while (a < ea);
-
- base_addr += way_incr;
- } while (--way_count != 0);
-}
-
-extern void __weak sh4__flush_region_init(void);
-
-/*
- * SH-4 has virtually indexed and physically tagged cache.
- */
-void __init sh4_cache_init(void)
-{
- printk("PVR=%08x CVR=%08x PRR=%08x\n",
- __raw_readl(CCN_PVR),
- __raw_readl(CCN_CVR),
- __raw_readl(CCN_PRR));
-
- local_flush_icache_range = sh4_flush_icache_range;
- local_flush_dcache_page = sh4_flush_dcache_page;
- local_flush_cache_all = sh4_flush_cache_all;
- local_flush_cache_mm = sh4_flush_cache_mm;
- local_flush_cache_dup_mm = sh4_flush_cache_mm;
- local_flush_cache_page = sh4_flush_cache_page;
- local_flush_cache_range = sh4_flush_cache_range;
-
- sh4__flush_region_init();
-}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
deleted file mode 100644
index 9b63a53a5e46fe..00000000000000
--- a/arch/sh/mm/cache-sh7705.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * arch/sh/mm/cache-sh7705.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2004 Alex Song
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/pagemap.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * The 32KB cache on the SH7705 suffers from the same synonym problem
- * as SH4 CPUs
- */
-static inline void cache_wback_all(void)
-{
- unsigned long ways, waysize, addrstart;
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
- int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
-
- data = __raw_readl(addr);
-
- if ((data & v) == v)
- __raw_writel(data & ~v, addr);
-
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
- */
-static void sh7705_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
-
- start = data->addr1;
- end = data->addr2;
-
- __flush_wback_region((void *)start, end - start);
-}
-
-/*
- * Writeback&Invalidate the D-cache of the page
- */
-static void __flush_dcache_page(unsigned long phys)
-{
- unsigned long ways, waysize, addrstart;
- unsigned long flags;
-
- phys |= SH_CACHE_VALID;
-
- /*
- * Here, phys is the physical address of the page. We check all the
- * tags in the cache for those with the same page number as this page
- * (by masking off the lowest 2 bits of the 19-bit tag; these bits are
- * derived from the offset within in the 4k page). Matching valid
- * entries are invalidated.
- *
- * Since 2 bits of the cache index are derived from the virtual page
- * number, knowing this would reduce the number of cache entries to be
- * searched by a factor of 4. However this function exists to deal with
- * potential cache aliasing, therefore the optimisation is probably not
- * possible.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
-
- data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
- if (data == phys) {
- data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
- __raw_writel(data, addr);
- }
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh7705_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
- __flush_dcache_page(__pa(page_address(page)));
-}
-
-static void sh7705_flush_cache_all(void *args)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- cache_wback_all();
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDRESS: Virtual Address (U0 address)
- */
-static void sh7705_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- unsigned long pfn = data->addr2;
-
- __flush_dcache_page(pfn << PAGE_SHIFT);
-}
-
-/*
- * This is called when a page-cache page is about to be mapped into a
- * user process' address space. It offers an opportunity for a
- * port to ensure d-cache/i-cache coherency if necessary.
- *
- * Not entirely sure why this is necessary on SH3 with 32K cache but
- * without it we get occasional "Memory fault" when loading a program.
- */
-static void sh7705_flush_icache_page(void *page)
-{
- __flush_purge_region(page_address(page), PAGE_SIZE);
-}
-
-void __init sh7705_cache_init(void)
-{
- local_flush_icache_range = sh7705_flush_icache_range;
- local_flush_dcache_page = sh7705_flush_dcache_page;
- local_flush_cache_all = sh7705_flush_cache_all;
- local_flush_cache_mm = sh7705_flush_cache_all;
- local_flush_cache_dup_mm = sh7705_flush_cache_all;
- local_flush_cache_range = sh7705_flush_cache_all;
- local_flush_cache_page = sh7705_flush_cache_page;
- local_flush_icache_page = sh7705_flush_icache_page;
-}
diff --git a/arch/sh/mm/cache-shx3.c b/arch/sh/mm/cache-shx3.c
deleted file mode 100644
index 24c58b7dc02265..00000000000000
--- a/arch/sh/mm/cache-shx3.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/sh/mm/cache-shx3.c - SH-X3 optimized cache ops
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/cache.h>
-
-#define CCR_CACHE_SNM 0x40000 /* Hardware-assisted synonym avoidance */
-#define CCR_CACHE_IBE 0x1000000 /* ICBI broadcast */
-
-void __init shx3_cache_init(void)
-{
- unsigned int ccr;
-
- ccr = __raw_readl(SH_CCR);
-
- /*
- * If we've got cache aliases, resolve them in hardware.
- */
- if (boot_cpu_data.dcache.n_aliases || boot_cpu_data.icache.n_aliases) {
- ccr |= CCR_CACHE_SNM;
-
- boot_cpu_data.icache.n_aliases = 0;
- boot_cpu_data.dcache.n_aliases = 0;
-
- pr_info("Enabling hardware synonym avoidance\n");
- }
-
-#ifdef CONFIG_SMP
- /*
- * Broadcast I-cache block invalidations by default.
- */
- ccr |= CCR_CACHE_IBE;
-#endif
-
- writel_uncached(ccr, SH_CCR);
-}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
deleted file mode 100644
index 3aef78ceb82090..00000000000000
--- a/arch/sh/mm/cache.c
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void (*local_flush_cache_all)(void *args) = cache_noop;
-void (*local_flush_cache_mm)(void *args) = cache_noop;
-void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
-void (*local_flush_cache_page)(void *args) = cache_noop;
-void (*local_flush_cache_range)(void *args) = cache_noop;
-void (*local_flush_dcache_page)(void *args) = cache_noop;
-void (*local_flush_icache_range)(void *args) = cache_noop;
-void (*local_flush_icache_page)(void *args) = cache_noop;
-void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
-
-void (*__flush_wback_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_wback_region);
-void (*__flush_purge_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_purge_region);
-void (*__flush_invalidate_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_invalidate_region);
-
-static inline void noop__flush_region(void *start, int size)
-{
-}
-
-static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
- int wait)
-{
- preempt_disable();
-
- /* Needing IPI for cross-core flush is SHX3-specific. */
-#ifdef CONFIG_CPU_SHX3
- /*
- * It's possible that this gets called early on when IRQs are
- * still disabled due to ioremapping by the boot CPU, so don't
- * even attempt IPIs unless there are other CPUs online.
- */
- if (num_online_cpus() > 1)
- smp_call_function(func, info, wait);
-#endif
-
- func(info);
-
- preempt_enable();
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
- kunmap_coherent(vto);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-
- if (vma->vm_flags & VM_EXEC)
- flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
- kunmap_coherent(vfrom);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(from) &&
- test_bit(PG_dcache_clean, &from->flags)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent(vfrom);
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
-
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
- (vma->vm_flags & VM_EXEC))
- __flush_purge_region(vto, PAGE_SIZE);
-
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
- void *kaddr = kmap_atomic(page);
-
- clear_page(kaddr);
-
- if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
- __flush_purge_region(kaddr, PAGE_SIZE);
-
- kunmap_atomic(kaddr);
-}
-EXPORT_SYMBOL(clear_user_highpage);
-
-void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
-{
- struct page *page;
- unsigned long pfn = pte_pfn(pte);
-
- if (!boot_cpu_data.dcache.n_aliases)
- return;
-
- page = pfn_to_page(pfn);
- if (pfn_valid(pfn)) {
- int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
- if (dirty)
- __flush_purge_region(page_address(page), PAGE_SIZE);
- }
-}
-
-void __flush_anon_page(struct page *page, unsigned long vmaddr)
-{
- unsigned long addr = (unsigned long) page_address(page);
-
- if (pages_do_alias(addr, vmaddr)) {
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *kaddr;
-
- kaddr = kmap_coherent(page, vmaddr);
- /* XXX.. For now kunmap_coherent() does a purge */
- /* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
- kunmap_coherent(kaddr);
- } else
- __flush_purge_region((void *)addr, PAGE_SIZE);
- }
-}
-
-void flush_cache_all(void)
-{
- cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
-}
-EXPORT_SYMBOL(flush_cache_all);
-
-void flush_cache_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
-}
-
-void flush_cache_dup_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
- unsigned long pfn)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = addr;
- data.addr2 = pfn;
-
- cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_cache_range);
-
-void flush_dcache_page(struct page *page)
-{
- cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void flush_icache_range(unsigned long start, unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = NULL;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
- /* Nothing uses the VMA, so just pass the struct page along */
- cacheop_on_each_cpu(local_flush_icache_page, page, 1);
-}
-
-void flush_cache_sigtramp(unsigned long address)
-{
- cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
-}
-
-static void compute_alias(struct cache_info *c)
-{
-#ifdef CONFIG_MMU
- c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
-#else
- c->alias_mask = 0;
-#endif
- c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
-}
-
-static void __init emit_cache_params(void)
-{
- printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.icache.ways,
- boot_cpu_data.icache.sets,
- boot_cpu_data.icache.way_incr);
- printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.icache.entry_mask,
- boot_cpu_data.icache.alias_mask,
- boot_cpu_data.icache.n_aliases);
- printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.dcache.ways,
- boot_cpu_data.dcache.sets,
- boot_cpu_data.dcache.way_incr);
- printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.dcache.entry_mask,
- boot_cpu_data.dcache.alias_mask,
- boot_cpu_data.dcache.n_aliases);
-
- /*
- * Emit Secondary Cache parameters if the CPU has a probed L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.scache.ways,
- boot_cpu_data.scache.sets,
- boot_cpu_data.scache.way_incr);
- printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.scache.entry_mask,
- boot_cpu_data.scache.alias_mask,
- boot_cpu_data.scache.n_aliases);
- }
-}
-
-void __init cpu_cache_init(void)
-{
- unsigned int cache_disabled = 0;
-
-#ifdef SH_CCR
- cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
-#endif
-
- compute_alias(&boot_cpu_data.icache);
- compute_alias(&boot_cpu_data.dcache);
- compute_alias(&boot_cpu_data.scache);
-
- __flush_wback_region = noop__flush_region;
- __flush_purge_region = noop__flush_region;
- __flush_invalidate_region = noop__flush_region;
-
- /*
- * No flushing is necessary in the disabled cache case so we can
- * just keep the noop functions in local_flush_..() and __flush_..()
- */
- if (unlikely(cache_disabled))
- goto skip;
-
- if (boot_cpu_data.type == CPU_J2) {
- extern void __weak j2_cache_init(void);
-
- j2_cache_init();
- } else if (boot_cpu_data.family == CPU_FAMILY_SH2) {
- extern void __weak sh2_cache_init(void);
-
- sh2_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
- extern void __weak sh2a_cache_init(void);
-
- sh2a_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH3) {
- extern void __weak sh3_cache_init(void);
-
- sh3_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7705) &&
- (boot_cpu_data.dcache.sets == 512)) {
- extern void __weak sh7705_cache_init(void);
-
- sh7705_cache_init();
- }
- }
-
- if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
- extern void __weak sh4_cache_init(void);
-
- sh4_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7786) ||
- (boot_cpu_data.type == CPU_SHX3)) {
- extern void __weak shx3_cache_init(void);
-
- shx3_cache_init();
- }
- }
-
-skip:
- emit_cache_params();
-}
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
deleted file mode 100644
index 0de206c1acfe9f..00000000000000
--- a/arch/sh/mm/consistent.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-static int __init memchunk_setup(char *str)
-{
- return 1; /* accept anything that begins with "memchunk." */
-}
-__setup("memchunk.", memchunk_setup);
-
-static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
-{
- char *p = boot_command_line;
- int k = strlen(name);
-
- while ((p = strstr(p, "memchunk."))) {
- p += 9; /* strlen("memchunk.") */
- if (!strncmp(name, p, k) && p[k] == '=') {
- p += k + 1;
- *sizep = memparse(p, NULL);
- pr_info("%s: forcing memory chunk size to 0x%08lx\n",
- name, *sizep);
- break;
- }
- }
-}
-
-int __init platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
-{
- struct resource *r;
- dma_addr_t dma_handle;
- void *buf;
-
- r = pdev->resource + pdev->num_resources - 1;
- if (r->flags) {
- pr_warn("%s: unable to find empty space for resource\n", name);
- return -EINVAL;
- }
-
- memchunk_cmdline_override(name, &memsize);
- if (!memsize)
- return 0;
-
- buf = dma_alloc_coherent(&pdev->dev, memsize, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_warn("%s: unable to allocate memory\n", name);
- return -ENOMEM;
- }
-
- r->flags = IORESOURCE_MEM;
- r->start = dma_handle;
- r->end = r->start + memsize - 1;
- r->name = name;
- return 0;
-}
diff --git a/arch/sh/mm/extable_32.c b/arch/sh/mm/extable_32.c
deleted file mode 100644
index 14312027bb0806..00000000000000
--- a/arch/sh/mm/extable_32.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/mm/extable.c
- * Taken from:
- * linux/arch/i386/mm/extable.c
- */
-
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return 1;
- }
-
- return 0;
-}
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
deleted file mode 100644
index acd2f5e50bfcd0..00000000000000
--- a/arch/sh/mm/fault.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Page fault handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * Based on linux/arch/i386/mm/fault.c:
- * Copyright (C) 1995 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched/signal.h>
-#include <linux/hardirq.h>
-#include <linux/kprobes.h>
-#include <linux/perf_event.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <asm/io_trapped.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-static void
-force_sig_info_fault(int si_signo, int si_code, unsigned long address)
-{
- force_sig_fault(si_signo, si_code, (void __user *)address);
-}
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-static void show_pte(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
-
- if (mm) {
- pgd = mm->pgd;
- } else {
- pgd = get_TTB();
-
- if (unlikely(!pgd))
- pgd = swapper_pg_dir;
- }
-
- pr_alert("pgd = %p\n", pgd);
- pgd += pgd_index(addr);
- pr_alert("[%08lx] *pgd=%0*llx", addr, (u32)(sizeof(*pgd) * 2),
- (u64)pgd_val(*pgd));
-
- do {
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
-
- if (pgd_none(*pgd))
- break;
-
- if (pgd_bad(*pgd)) {
- pr_cont("(bad)");
- break;
- }
-
- p4d = p4d_offset(pgd, addr);
- if (PTRS_PER_P4D != 1)
- pr_cont(", *p4d=%0*Lx", (u32)(sizeof(*p4d) * 2),
- (u64)p4d_val(*p4d));
-
- if (p4d_none(*p4d))
- break;
-
- if (p4d_bad(*p4d)) {
- pr_cont("(bad)");
- break;
- }
-
- pud = pud_offset(p4d, addr);
- if (PTRS_PER_PUD != 1)
- pr_cont(", *pud=%0*llx", (u32)(sizeof(*pud) * 2),
- (u64)pud_val(*pud));
-
- if (pud_none(*pud))
- break;
-
- if (pud_bad(*pud)) {
- pr_cont("(bad)");
- break;
- }
-
- pmd = pmd_offset(pud, addr);
- if (PTRS_PER_PMD != 1)
- pr_cont(", *pmd=%0*llx", (u32)(sizeof(*pmd) * 2),
- (u64)pmd_val(*pmd));
-
- if (pmd_none(*pmd))
- break;
-
- if (pmd_bad(*pmd)) {
- pr_cont("(bad)");
- break;
- }
-
- /* We must not map this if we have highmem enabled */
- if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
- break;
-
- pte = pte_offset_kernel(pmd, addr);
- pr_cont(", *pte=%0*llx", (u32)(sizeof(*pte) * 2),
- (u64)pte_val(*pte));
- } while (0);
-
- pr_cont("\n");
-}
-
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
- unsigned index = pgd_index(address);
- pgd_t *pgd_k;
- p4d_t *p4d, *p4d_k;
- pud_t *pud, *pud_k;
- pmd_t *pmd, *pmd_k;
-
- pgd += index;
- pgd_k = init_mm.pgd + index;
-
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d = p4d_offset(pgd, address);
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud = pud_offset(p4d, address);
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- if (!pud_present(*pud))
- set_pud(pud, *pud_k);
-
- pmd = pmd_offset(pud, address);
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- if (!pmd_present(*pmd))
- set_pmd(pmd, *pmd_k);
- else {
- /*
- * The page tables are fully synchronised so there must
- * be another reason for the fault. Return NULL here to
- * signal that we have not taken care of the fault.
- */
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
- return NULL;
- }
-
- return pmd_k;
-}
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define __FAULT_ADDR_LIMIT P3_ADDR_MAX
-#else
-#define __FAULT_ADDR_LIMIT VMALLOC_END
-#endif
-
-/*
- * Handle a fault on the vmalloc or module mapping area
- */
-static noinline int vmalloc_fault(unsigned long address)
-{
- pgd_t *pgd_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
-
- /* Make sure we are in vmalloc/module/P3 area: */
- if (!(address >= VMALLOC_START && address < __FAULT_ADDR_LIMIT))
- return -1;
-
- /*
- * Synchronize this task's top level page-table
- * with the 'reference' page table.
- *
- * Do _not_ use "current" here. We might be inside
- * an interrupt in the middle of a task switch..
- */
- pgd_k = get_TTB();
- pmd_k = vmalloc_sync_one(pgd_k, address);
- if (!pmd_k)
- return -1;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- if (!pte_present(*pte_k))
- return -1;
-
- return 0;
-}
-
-static void
-show_fault_oops(struct pt_regs *regs, unsigned long address)
-{
- if (!oops_may_print())
- return;
-
- pr_alert("BUG: unable to handle kernel %s at %08lx\n",
- address < PAGE_SIZE ? "NULL pointer dereference"
- : "paging request",
- address);
- pr_alert("PC:");
- printk_address(regs->pc, 1);
-
- show_pte(NULL, address);
-}
-
-static noinline void
-no_context(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- /* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
- return;
-
- if (handle_trapped_io(regs, address))
- return;
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- bust_spinlocks(1);
-
- show_fault_oops(regs, address);
-
- die("Oops", regs, error_code);
-}
-
-static void
-__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- /* User mode accesses just cause a SIGSEGV */
- if (user_mode(regs)) {
- /*
- * It's possible to have interrupts off here:
- */
- local_irq_enable();
-
- force_sig_info_fault(SIGSEGV, si_code, address);
-
- return;
- }
-
- no_context(regs, error_code, address);
-}
-
-static noinline void
-bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
-}
-
-static void
-__bad_area(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- struct mm_struct *mm = current->mm;
-
- /*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
- mmap_read_unlock(mm);
-
- __bad_area_nosemaphore(regs, error_code, address, si_code);
-}
-
-static noinline void
-bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_MAPERR);
-}
-
-static noinline void
-bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_ACCERR);
-}
-
-static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->mm;
-
- mmap_read_unlock(mm);
-
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs))
- no_context(regs, error_code, address);
-
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address);
-}
-
-static noinline int
-mm_fault_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, vm_fault_t fault)
-{
- /*
- * Pagefault was interrupted by SIGKILL. We have no reason to
- * continue pagefault.
- */
- if (fault_signal_pending(fault, regs)) {
- if (!user_mode(regs))
- no_context(regs, error_code, address);
- return 1;
- }
-
- /* Release mmap_lock first if necessary */
- if (!(fault & VM_FAULT_RETRY))
- mmap_read_unlock(current->mm);
-
- if (!(fault & VM_FAULT_ERROR))
- return 0;
-
- if (fault & VM_FAULT_OOM) {
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs)) {
- no_context(regs, error_code, address);
- return 1;
- }
-
- /*
- * We ran out of memory, call the OOM killer, and return the
- * userspace (which will retry the fault, or kill us if we got
- * oom-killed):
- */
- pagefault_out_of_memory();
- } else {
- if (fault & VM_FAULT_SIGBUS)
- do_sigbus(regs, error_code, address);
- else if (fault & VM_FAULT_SIGSEGV)
- bad_area(regs, error_code, address);
- else
- BUG();
- }
-
- return 1;
-}
-
-static inline int access_error(int error_code, struct vm_area_struct *vma)
-{
- if (error_code & FAULT_CODE_WRITE) {
- /* write, present and write, not present: */
- if (unlikely(!(vma->vm_flags & VM_WRITE)))
- return 1;
- return 0;
- }
-
- /* ITLB miss on NX page */
- if (unlikely((error_code & FAULT_CODE_ITLB) &&
- !(vma->vm_flags & VM_EXEC)))
- return 1;
-
- /* read, not present: */
- if (unlikely(!vma_is_accessible(vma)))
- return 1;
-
- return 0;
-}
-
-static int fault_in_kernel_space(unsigned long address)
-{
- return address >= TASK_SIZE;
-}
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
- unsigned long error_code,
- unsigned long address)
-{
- unsigned long vec;
- struct task_struct *tsk;
- struct mm_struct *mm;
- struct vm_area_struct * vma;
- vm_fault_t fault;
- unsigned int flags = FAULT_FLAG_DEFAULT;
-
- tsk = current;
- mm = tsk->mm;
- vec = lookup_exception_vector();
-
- /*
- * We fault-in kernel-space virtual memory on-demand. The
- * 'reference' page table is init_mm.pgd.
- *
- * NOTE! We MUST NOT take any locks for this case. We may
- * be in an interrupt or a critical region, and should
- * only copy the information from the master page table,
- * nothing more.
- */
- if (unlikely(fault_in_kernel_space(address))) {
- if (vmalloc_fault(address) >= 0)
- return;
- if (kprobe_page_fault(regs, vec))
- return;
-
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
- if (unlikely(kprobe_page_fault(regs, vec)))
- return;
-
- /* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK)
- local_irq_enable();
-
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
-
- /*
- * If we're in an interrupt, have no user context or are running
- * with pagefaults disabled then we must not take the fault:
- */
- if (unlikely(faulthandler_disabled() || !mm)) {
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
-retry:
- mmap_read_lock(mm);
-
- vma = find_vma(mm, address);
- if (unlikely(!vma)) {
- bad_area(regs, error_code, address);
- return;
- }
- if (likely(vma->vm_start <= address))
- goto good_area;
- if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
- bad_area(regs, error_code, address);
- return;
- }
- if (unlikely(expand_stack(vma, address))) {
- bad_area(regs, error_code, address);
- return;
- }
-
- /*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- if (unlikely(access_error(error_code, vma))) {
- bad_area_access_error(regs, error_code, address);
- return;
- }
-
- set_thread_fault_code(error_code);
-
- if (user_mode(regs))
- flags |= FAULT_FLAG_USER;
- if (error_code & FAULT_CODE_WRITE)
- flags |= FAULT_FLAG_WRITE;
-
- /*
- * If for any reason at all we couldn't handle the fault,
- * make sure we exit gracefully rather than endlessly redo
- * the fault.
- */
- fault = handle_mm_fault(vma, address, flags, regs);
-
- if (unlikely(fault & (VM_FAULT_RETRY | VM_FAULT_ERROR)))
- if (mm_fault_error(regs, error_code, address, fault))
- return;
-
- /* The fault is fully completed (including releasing mmap lock) */
- if (fault & VM_FAULT_COMPLETED)
- return;
-
- if (fault & VM_FAULT_RETRY) {
- flags |= FAULT_FLAG_TRIED;
-
- /*
- * No need to mmap_read_unlock(mm) as we would
- * have already released it in __lock_page_or_retry
- * in mm/filemap.c.
- */
- goto retry;
- }
-
- mmap_read_unlock(mm);
-}
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
deleted file mode 100644
index 8b8ef89721041b..00000000000000
--- a/arch/sh/mm/flush-sh4.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_wback_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_purge_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
- while (cnt) {
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * No write back please
- */
-static void sh4__flush_invalidate_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-void __init sh4__flush_region_init(void)
-{
- __flush_wback_region = sh4__flush_wback_region;
- __flush_invalidate_region = sh4__flush_invalidate_region;
- __flush_purge_region = sh4__flush_purge_region;
-}
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
deleted file mode 100644
index 999ab5916e6927..00000000000000
--- a/arch/sh/mm/hugetlbpage.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/mm/hugetlbpage.c
- *
- * SuperH HugeTLB page support.
- *
- * Cloned from sparc64 by Paul Mundt.
- *
- * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com)
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/sysctl.h>
-
-#include <asm/mman.h>
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_alloc(mm, pgd, addr);
- if (p4d) {
- pud = pud_alloc(mm, p4d, addr);
- if (pud) {
- pmd = pmd_alloc(mm, pud, addr);
- if (pmd)
- pte = pte_alloc_map(mm, pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-pte_t *huge_pte_offset(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_offset(pgd, addr);
- if (p4d) {
- pud = pud_offset(p4d, addr);
- if (pud) {
- pmd = pmd_offset(pud, addr);
- if (pmd)
- pte = pte_offset_map(pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-int pmd_huge(pmd_t pmd)
-{
- return 0;
-}
-
-int pud_huge(pud_t pud)
-{
- return 0;
-}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
deleted file mode 100644
index 506784702430c7..00000000000000
--- a/arch/sh/mm/init.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/sh/mm/init.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2011 Paul Mundt
- *
- * Based on linux/arch/i386/mm/init.c:
- * Copyright (C) 1995 Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <linux/pagemap.h>
-#include <linux/percpu.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/kexec.h>
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/sizes.h>
-#include "ioremap.h"
-
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-void __init generic_mem_init(void)
-{
- memblock_add(__MEMORY_START, __MEMORY_SIZE);
-}
-
-void __init __weak plat_mem_setup(void)
-{
- /* Nothing to see here, move along. */
-}
-
-#ifdef CONFIG_MMU
-static pte_t *__get_pte_phys(unsigned long addr)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
-
- pgd = pgd_offset_k(addr);
- if (pgd_none(*pgd)) {
- pgd_ERROR(*pgd);
- return NULL;
- }
-
- p4d = p4d_alloc(NULL, pgd, addr);
- if (unlikely(!p4d)) {
- p4d_ERROR(*p4d);
- return NULL;
- }
-
- pud = pud_alloc(NULL, p4d, addr);
- if (unlikely(!pud)) {
- pud_ERROR(*pud);
- return NULL;
- }
-
- pmd = pmd_alloc(NULL, pud, addr);
- if (unlikely(!pmd)) {
- pmd_ERROR(*pmd);
- return NULL;
- }
-
- return pte_offset_kernel(pmd, addr);
-}
-
-static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
- if (!pte_none(*pte)) {
- pte_ERROR(*pte);
- return;
- }
-
- set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
- local_flush_tlb_one(get_asid(), addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_wire_entry(NULL, addr, *pte);
-}
-
-static void clear_pte_phys(unsigned long addr, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_unwire_entry();
-
- set_pte(pte, pfn_pte(0, __pgprot(0)));
- local_flush_tlb_one(get_asid(), addr);
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- set_pte_phys(address, phys, prot);
-}
-
-void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- clear_pte_phys(address, prot);
-}
-
-static pmd_t * __init one_md_table_init(pud_t *pud)
-{
- if (pud_none(*pud)) {
- pmd_t *pmd;
-
- pmd = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pmd)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pud_populate(&init_mm, pud, pmd);
- BUG_ON(pmd != pmd_offset(pud, 0));
- }
-
- return pmd_offset(pud, 0);
-}
-
-static pte_t * __init one_page_table_init(pmd_t *pmd)
-{
- if (pmd_none(*pmd)) {
- pte_t *pte;
-
- pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pte)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pmd_populate_kernel(&init_mm, pmd, pte);
- BUG_ON(pte != pte_offset_kernel(pmd, 0));
- }
-
- return pte_offset_kernel(pmd, 0);
-}
-
-static pte_t * __init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
- unsigned long vaddr, pte_t *lastpte)
-{
- return pte;
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
- int i, j, k;
- unsigned long vaddr;
-
- vaddr = start;
- i = pgd_index(vaddr);
- j = pud_index(vaddr);
- k = pmd_index(vaddr);
- pgd = pgd_base + i;
-
- for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pud = (pud_t *)pgd;
- for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
- pmd = one_md_table_init(pud);
-#ifndef __PAGETABLE_PMD_FOLDED
- pmd += k;
-#endif
- for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
- pte = page_table_kmap_check(one_page_table_init(pmd),
- pmd, vaddr, pte);
- vaddr += PMD_SIZE;
- }
- k = 0;
- }
- j = 0;
- }
-}
-#endif /* CONFIG_MMU */
-
-void __init allocate_pgdat(unsigned int nid)
-{
- unsigned long start_pfn, end_pfn;
-
- get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
-
-#ifdef CONFIG_NUMA
- NODE_DATA(nid) = memblock_alloc_try_nid(
- sizeof(struct pglist_data),
- SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
- MEMBLOCK_ALLOC_ACCESSIBLE, nid);
- if (!NODE_DATA(nid))
- panic("Can't allocate pgdat for node %d\n", nid);
-#endif
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-}
-
-static void __init do_init_bootmem(void)
-{
- unsigned long start_pfn, end_pfn;
- int i;
-
- /* Add active regions with valid PFNs. */
- for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL)
- __add_active_range(0, start_pfn, end_pfn);
-
- /* All of system RAM sits in node 0 for the non-NUMA case */
- allocate_pgdat(0);
- node_set_online(0);
-
- plat_mem_setup();
-
- sparse_init();
-}
-
-static void __init early_reserve_mem(void)
-{
- unsigned long start_pfn;
- u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
- u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
-
- /*
- * Partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(_end));
-
- /*
- * Reserve the kernel text and Reserve the bootmem bitmap. We do
- * this in two steps (first step was init_bootmem()), because
- * this catches the (definitely buggy) case of us accidentally
- * initializing the bootmem allocator with an invalid RAM area.
- */
- memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
-
- /*
- * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
- */
- if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
-
- /*
- * Handle additional early reservations
- */
- check_for_initrd();
- reserve_crashkernel();
-}
-
-void __init paging_init(void)
-{
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- unsigned long vaddr, end;
-
- sh_mv.mv_mem_init();
-
- early_reserve_mem();
-
- /*
- * Once the early reservations are out of the way, give the
- * platforms a chance to kick out some memory.
- */
- if (sh_mv.mv_mem_reserve)
- sh_mv.mv_mem_reserve();
-
- memblock_enforce_memory_limit(memory_limit);
- memblock_allow_resize();
-
- memblock_dump_all();
-
- /*
- * Determine low and high memory ranges:
- */
- max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
- min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
-
- nodes_clear(node_online_map);
-
- memory_start = (unsigned long)__va(__MEMORY_START);
- memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
-
- uncached_init();
- pmb_init();
- do_init_bootmem();
- ioremap_fixed_init();
-
- /* We don't need to map the kernel through the TLB, as
- * it is permanatly mapped using P1. So clear the
- * entire pgd. */
- memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
- /* Set an initial value for the MMU.TTB so we don't have to
- * check for a null value. */
- set_TTB(swapper_pg_dir);
-
- /*
- * Populate the relevant portions of swapper_pg_dir so that
- * we can use the fixmap entries without calling kmalloc.
- * pte's will be filled in by __set_fixmap().
- */
- vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
- end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
- page_table_range_init(vaddr, end, swapper_pg_dir);
-
- kmap_coherent_init();
-
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init(max_zone_pfns);
-}
-
-unsigned int mem_init_done = 0;
-
-void __init mem_init(void)
-{
- pg_data_t *pgdat;
-
- high_memory = NULL;
- for_each_online_pgdat(pgdat)
- high_memory = max_t(void *, high_memory,
- __va(pgdat_end_pfn(pgdat) << PAGE_SHIFT));
-
- memblock_free_all();
-
- /* Set this up early, so we can take care of the zero page */
- cpu_cache_init();
-
- /* clear the zero-page */
- memset(empty_zero_page, 0, PAGE_SIZE);
- __flush_wback_region(empty_zero_page, PAGE_SIZE);
-
- vsyscall_init();
-
- pr_info("virtual kernel memory layout:\n"
- " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
- " lowmem : 0x%08lx - 0x%08lx (%4ld MB) (cached)\n"
-#ifdef CONFIG_UNCACHED_MAPPING
- " : 0x%08lx - 0x%08lx (%4ld MB) (uncached)\n"
-#endif
- " .init : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .data : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .text : 0x%08lx - 0x%08lx (%4ld kB)\n",
- FIXADDR_START, FIXADDR_TOP,
- (FIXADDR_TOP - FIXADDR_START) >> 10,
-
- (unsigned long)VMALLOC_START, VMALLOC_END,
- (VMALLOC_END - VMALLOC_START) >> 20,
-
- (unsigned long)memory_start, (unsigned long)high_memory,
- ((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
-
-#ifdef CONFIG_UNCACHED_MAPPING
- uncached_start, uncached_end, uncached_size >> 20,
-#endif
-
- (unsigned long)&__init_begin, (unsigned long)&__init_end,
- ((unsigned long)&__init_end -
- (unsigned long)&__init_begin) >> 10,
-
- (unsigned long)&_etext, (unsigned long)&_edata,
- ((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
-
- (unsigned long)&_text, (unsigned long)&_etext,
- ((unsigned long)&_etext - (unsigned long)&_text) >> 10);
-
- mem_init_done = 1;
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-int arch_add_memory(int nid, u64 start, u64 size,
- struct mhp_params *params)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
- int ret;
-
- if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
- return -EINVAL;
-
- /* We only have ZONE_NORMAL, so this is easy.. */
- ret = __add_pages(nid, start_pfn, nr_pages, params);
- if (unlikely(ret))
- printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
-
- return ret;
-}
-
-void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
-
- __remove_pages(start_pfn, nr_pages, altmap);
-}
-#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
deleted file mode 100644
index 21342581144dee..00000000000000
--- a/arch/sh/mm/ioremap.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * arch/sh/mm/ioremap.c
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2005 - 2010 Paul Mundt
- *
- * Re-map IO memory to kernel address space so that we can access it.
- * This is needed for high PCI addresses that aren't mapped in the
- * 640k-1MB IO memory area on PC's
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include "ioremap.h"
-
-/*
- * On 32-bit SH, we traditionally have the whole physical address space mapped
- * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
- * anything but place the address in the proper segment. This is true for P1
- * and P2 addresses, as well as some P3 ones. However, most of the P3 addresses
- * and newer cores using extended addressing need to map through page tables, so
- * the ioremap() implementation becomes a bit more complicated.
- */
-#ifdef CONFIG_29BIT
-static void __iomem *
-__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
- phys_addr_t last_addr = offset + size - 1;
-
- /*
- * For P1 and P2 space this is trivial, as everything is already
- * mapped. Uncached access for P1 addresses are done through P2.
- * In the P3 case or for addresses outside of the 29-bit space,
- * mapping must be done by the PMB or by using page tables.
- */
- if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
- u64 flags = pgprot_val(prot);
-
- /*
- * Anything using the legacy PTEA space attributes needs
- * to be kicked down to page table mappings.
- */
- if (unlikely(flags & _PAGE_PCC_MASK))
- return NULL;
- if (unlikely(flags & _PAGE_CACHABLE))
- return (void __iomem *)P1SEGADDR(offset);
-
- return (void __iomem *)P2SEGADDR(offset);
- }
-
- /* P4 above the store queues are always mapped. */
- if (unlikely(offset >= P3_ADDR_MAX))
- return (void __iomem *)P4SEGADDR(offset);
-
- return NULL;
-}
-#else
-#define __ioremap_29bit(offset, size, prot) NULL
-#endif /* CONFIG_29BIT */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem * __ref
-__ioremap_caller(phys_addr_t phys_addr, unsigned long size,
- pgprot_t pgprot, void *caller)
-{
- struct vm_struct *area;
- unsigned long offset, last_addr, addr, orig_addr;
- void __iomem *mapped;
-
- mapped = __ioremap_trapped(phys_addr, size);
- if (mapped)
- return mapped;
-
- mapped = __ioremap_29bit(phys_addr, size, pgprot);
- if (mapped)
- return mapped;
-
- /* Don't allow wraparound or zero size */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- /*
- * If we can't yet use the regular approach, go the fixmap route.
- */
- if (!mem_init_done)
- return ioremap_fixed(phys_addr, size, pgprot);
-
- /*
- * First try to remap through the PMB.
- * PMB entries are all pre-faulted.
- */
- mapped = pmb_remap_caller(phys_addr, size, pgprot, caller);
- if (mapped && !IS_ERR(mapped))
- return mapped;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(last_addr+1) - phys_addr;
-
- /*
- * Ok, go for it..
- */
- area = get_vm_area_caller(size, VM_IOREMAP, caller);
- if (!area)
- return NULL;
- area->phys_addr = phys_addr;
- orig_addr = addr = (unsigned long)area->addr;
-
- if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
- vunmap((void *)orig_addr);
- return NULL;
- }
-
- return (void __iomem *)(offset + (char *)orig_addr);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-/*
- * Simple checks for non-translatable mappings.
- */
-static inline int iomapping_nontranslatable(unsigned long offset)
-{
-#ifdef CONFIG_29BIT
- /*
- * In 29-bit mode this includes the fixed P1/P2 areas, as well as
- * parts of P3.
- */
- if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
- return 1;
-#endif
-
- return 0;
-}
-
-void iounmap(void __iomem *addr)
-{
- unsigned long vaddr = (unsigned long __force)addr;
- struct vm_struct *p;
-
- /*
- * Nothing to do if there is no translatable mapping.
- */
- if (iomapping_nontranslatable(vaddr))
- return;
-
- /*
- * There's no VMA if it's from an early fixed mapping.
- */
- if (iounmap_fixed(addr) == 0)
- return;
-
- /*
- * If the PMB handled it, there's nothing else to do.
- */
- if (pmb_unmap(addr) == 0)
- return;
-
- p = remove_vm_area((void *)(vaddr & PAGE_MASK));
- if (!p) {
- printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
- return;
- }
-
- kfree(p);
-}
-EXPORT_SYMBOL(iounmap);
diff --git a/arch/sh/mm/ioremap.h b/arch/sh/mm/ioremap.h
deleted file mode 100644
index f2544e721a3526..00000000000000
--- a/arch/sh/mm/ioremap.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _SH_MM_IORMEMAP_H
-#define _SH_MM_IORMEMAP_H 1
-
-#ifdef CONFIG_IOREMAP_FIXED
-void __iomem *ioremap_fixed(phys_addr_t, unsigned long, pgprot_t);
-int iounmap_fixed(void __iomem *);
-void ioremap_fixed_init(void);
-#else
-static inline void __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- BUG();
- return NULL;
-}
-static inline void ioremap_fixed_init(void)
-{
-}
-static inline int iounmap_fixed(void __iomem *addr)
-{
- return -EINVAL;
-}
-#endif /* CONFIG_IOREMAP_FIXED */
-#endif /* _SH_MM_IORMEMAP_H */
diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c
deleted file mode 100644
index 136113bcac2599..00000000000000
--- a/arch/sh/mm/ioremap_fixed.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * These functions should only be used when it is necessary to map a
- * physical address space into the kernel address space before ioremap()
- * can be used, e.g. early in boot before paging_init().
- *
- * Copyright (C) 2009 Matt Fleming
- */
-
-#include <linux/vmalloc.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <asm/fixmap.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include "ioremap.h"
-
-struct ioremap_map {
- void __iomem *addr;
- unsigned long size;
- unsigned long fixmap_addr;
-};
-
-static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
-
-void __init ioremap_fixed_init(void)
-{
- struct ioremap_map *map;
- int i;
-
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
- }
-}
-
-void __init __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- enum fixed_addresses idx0, idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- unsigned long offset;
- int i, slot;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(phys_addr + size) - phys_addr;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (!map->addr) {
- map->size = size;
- slot = i;
- break;
- }
- }
-
- if (slot < 0)
- return NULL;
-
- /*
- * Mappings have to fit in the FIX_IOREMAP area.
- */
- nrpages = size >> PAGE_SHIFT;
- if (nrpages > FIX_N_IOREMAPS)
- return NULL;
-
- /*
- * Ok, go for it..
- */
- idx0 = FIX_IOREMAP_BEGIN + slot;
- idx = idx0;
- while (nrpages > 0) {
- pgprot_val(prot) |= _PAGE_WIRED;
- __set_fixmap(idx, phys_addr, prot);
- phys_addr += PAGE_SIZE;
- idx++;
- --nrpages;
- }
-
- map->addr = (void __iomem *)(offset + map->fixmap_addr);
- return map->addr;
-}
-
-int iounmap_fixed(void __iomem *addr)
-{
- enum fixed_addresses idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- int i, slot;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (map->addr == addr) {
- slot = i;
- break;
- }
- }
-
- /*
- * If we don't match, it's not for us.
- */
- if (slot < 0)
- return -EINVAL;
-
- nrpages = map->size >> PAGE_SHIFT;
-
- idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
- while (nrpages > 0) {
- __clear_fixmap(idx, __pgprot(_PAGE_WIRED));
- --idx;
- --nrpages;
- }
-
- map->size = 0;
- map->addr = NULL;
-
- return 0;
-}
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
deleted file mode 100644
index 73fd7cc9943076..00000000000000
--- a/arch/sh/mm/kmap.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/kmap.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
- unsigned long vaddr;
-
- /* cache the first coherent kmap pte */
- vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
- kmap_coherent_pte = virt_to_kpte(vaddr);
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- enum fixed_addresses idx;
- unsigned long vaddr;
-
- BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
-
- preempt_disable();
- pagefault_disable();
-
- idx = FIX_CMAP_END -
- (((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
- (FIX_N_COLOURS * smp_processor_id()));
-
- vaddr = __fix_to_virt(idx);
-
- BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
- set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
-
- return (void *)vaddr;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- if (kvaddr >= (void *)FIXADDR_START) {
- unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
- enum fixed_addresses idx = __virt_to_fix(vaddr);
-
- /* XXX.. Kill this later, here for sanity at the moment.. */
- __flush_purge_region((void *)vaddr, PAGE_SIZE);
-
- pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
- local_flush_tlb_one(get_asid(), vaddr);
- }
-
- pagefault_enable();
- preempt_enable();
-}
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
deleted file mode 100644
index b82199878b4594..00000000000000
--- a/arch/sh/mm/mmap.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/sh/mm/mmap.c
- *
- * Copyright (C) 2008 - 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sched/mm.h>
-#include <linux/mman.h>
-#include <linux/module.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-EXPORT_SYMBOL(shm_align_mask);
-
-#ifdef CONFIG_MMU
-static const pgprot_t protection_map[16] = {
- [VM_NONE] = PAGE_NONE,
- [VM_READ] = PAGE_READONLY,
- [VM_WRITE] = PAGE_COPY,
- [VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_EXEC] = PAGE_EXECREAD,
- [VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_EXEC | VM_WRITE] = PAGE_COPY,
- [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_SHARED] = PAGE_NONE,
- [VM_SHARED | VM_READ] = PAGE_READONLY,
- [VM_SHARED | VM_WRITE] = PAGE_WRITEONLY,
- [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED,
- [VM_SHARED | VM_EXEC] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_RWX,
- [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_RWX
-};
-DECLARE_VM_GET_PAGE_PROT
-
-/*
- * To avoid cache aliases, we map the shared page with same color.
- */
-static inline unsigned long COLOUR_ALIGN(unsigned long addr,
- unsigned long pgoff)
-{
- unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
- unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
-
- return base + off;
-}
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
-{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = 0;
- info.length = len;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- return vm_unmapped_area(&info);
-}
-
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
- const unsigned long len, const unsigned long pgoff,
- const unsigned long flags)
-{
- struct vm_area_struct *vma;
- struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- /* requesting a specific address */
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = VM_UNMAPPED_AREA_TOPDOWN;
- info.length = len;
- info.low_limit = PAGE_SIZE;
- info.high_limit = mm->mmap_base;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- addr = vm_unmapped_area(&info);
-
- /*
- * A failed mmap() very likely causes application failure,
- * so fall back to the bottom-up function here. This scenario
- * can happen with large stack limits and large mmap()
- * allocations.
- */
- if (addr & ~PAGE_MASK) {
- VM_BUG_ON(addr != -ENOMEM);
- info.flags = 0;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- addr = vm_unmapped_area(&info);
- }
-
- return addr;
-}
-#endif /* CONFIG_MMU */
-
-/*
- * You really shouldn't be using read() or write() on /dev/mem. This
- * might go away in the future.
- */
-int valid_phys_addr_range(phys_addr_t addr, size_t count)
-{
- if (addr < __MEMORY_START)
- return 0;
- if (addr + count > __pa(high_memory))
- return 0;
-
- return 1;
-}
-
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
-{
- return 1;
-}
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
deleted file mode 100644
index 78c4b6e6d33ba3..00000000000000
--- a/arch/sh/mm/nommu.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/nommu.c
- *
- * Various helper routines and stubs for MMUless SH.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <linux/uaccess.h>
-
-/*
- * Nothing too terribly exciting here ..
- */
-void copy_page(void *to, void *from)
-{
- memcpy(to, from, PAGE_SIZE);
-}
-
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
-{
- memcpy(to, from, n);
- return 0;
-}
-
-__kernel_size_t __clear_user(void __user *to, __kernel_size_t n)
-{
- memset((__force void *)to, 0, n);
- return 0;
-}
-
-void local_flush_tlb_all(void)
-{
- BUG();
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- BUG();
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-void __flush_tlb_global(void)
-{
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-}
-
-void __init kmap_coherent_init(void)
-{
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- BUG();
- return NULL;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- BUG();
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
-}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
deleted file mode 100644
index 50f0dc1744d049..00000000000000
--- a/arch/sh/mm/numa.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/mm/numa.c - Multiple node support for SH machines
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/memblock.h>
-#include <linux/mm.h>
-#include <linux/numa.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL_GPL(node_data);
-
-/*
- * On SH machines the conventional approach is to stash system RAM
- * in node 0, and other memory blocks in to node 1 and up, ordered by
- * latency. Each node's pgdat is node-local at the beginning of the node,
- * immediately followed by the node mem map.
- */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
- unsigned long start_pfn, end_pfn;
-
- /* Don't allow bogus node assignment */
- BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
-
- start_pfn = PFN_DOWN(start);
- end_pfn = PFN_DOWN(end);
-
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_add(start, end - start);
-
- __add_active_range(nid, start_pfn, end_pfn);
-
- /* Node-local pgdat */
- NODE_DATA(nid) = memblock_alloc_node(sizeof(struct pglist_data),
- SMP_CACHE_BYTES, nid);
- if (!NODE_DATA(nid))
- panic("%s: Failed to allocate %zu bytes align=0x%x nid=%d\n",
- __func__, sizeof(struct pglist_data), SMP_CACHE_BYTES,
- nid);
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-
- /* It's up */
- node_set_online(nid);
-}
diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c
deleted file mode 100644
index cf7ce4b5735954..00000000000000
--- a/arch/sh/mm/pgtable.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-static struct kmem_cache *pgd_cachep;
-#if PAGETABLE_LEVELS > 2
-static struct kmem_cache *pmd_cachep;
-#endif
-
-void pgd_ctor(void *x)
-{
- pgd_t *pgd = x;
-
- memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
- memcpy(pgd + USER_PTRS_PER_PGD,
- swapper_pg_dir + USER_PTRS_PER_PGD,
- (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
-void pgtable_cache_init(void)
-{
- pgd_cachep = kmem_cache_create("pgd_cache",
- PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, pgd_ctor);
-#if PAGETABLE_LEVELS > 2
- pmd_cachep = kmem_cache_create("pmd_cache",
- PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, NULL);
-#endif
-}
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return kmem_cache_alloc(pgd_cachep, GFP_KERNEL);
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- kmem_cache_free(pgd_cachep, pgd);
-}
-
-#if PAGETABLE_LEVELS > 2
-void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
- set_pud(pud, __pud((unsigned long)pmd));
-}
-
-pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- return kmem_cache_alloc(pmd_cachep, GFP_KERNEL | __GFP_ZERO);
-}
-
-void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
- kmem_cache_free(pmd_cachep, pmd);
-}
-#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
deleted file mode 100644
index 68eb7cc6e56435..00000000000000
--- a/arch/sh/mm/pmb.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * arch/sh/mm/pmb.c
- *
- * Privileged Space Mapping Buffer (PMB) Support.
- *
- * Copyright (C) 2005 - 2011 Paul Mundt
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/syscore_ops.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/vmalloc.h>
-#include <linux/pgtable.h>
-#include <asm/cacheflush.h>
-#include <linux/sizes.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-
-struct pmb_entry;
-
-struct pmb_entry {
- unsigned long vpn;
- unsigned long ppn;
- unsigned long flags;
- unsigned long size;
-
- raw_spinlock_t lock;
-
- /*
- * 0 .. NR_PMB_ENTRIES for specific entry selection, or
- * PMB_NO_ENTRY to search for a free one
- */
- int entry;
-
- /* Adjacent entry link for contiguous multi-entry mappings */
- struct pmb_entry *link;
-};
-
-static struct {
- unsigned long size;
- int flag;
-} pmb_sizes[] = {
- { .size = SZ_512M, .flag = PMB_SZ_512M, },
- { .size = SZ_128M, .flag = PMB_SZ_128M, },
- { .size = SZ_64M, .flag = PMB_SZ_64M, },
- { .size = SZ_16M, .flag = PMB_SZ_16M, },
-};
-
-static void pmb_unmap_entry(struct pmb_entry *, int depth);
-
-static DEFINE_RWLOCK(pmb_rwlock);
-static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
-static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
-
-static unsigned int pmb_iomapping_enabled;
-
-static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
-{
- return (entry & PMB_E_MASK) << PMB_E_SHIFT;
-}
-
-static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_ADDR;
-}
-
-static __always_inline unsigned long mk_pmb_data(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_DATA;
-}
-
-static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
-{
- return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
-}
-
-/*
- * Ensure that the PMB entries match our cache configuration.
- *
- * When we are in 32-bit address extended mode, CCR.CB becomes
- * invalid, so care must be taken to manually adjust cacheable
- * translations.
- */
-static __always_inline unsigned long pmb_cache_flags(void)
-{
- unsigned long flags = 0;
-
-#if defined(CONFIG_CACHE_OFF)
- flags |= PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITETHROUGH)
- flags |= PMB_C | PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- flags |= PMB_C;
-#endif
-
- return flags;
-}
-
-/*
- * Convert typical pgprot value to the PMB equivalent
- */
-static inline unsigned long pgprot_to_pmb_flags(pgprot_t prot)
-{
- unsigned long pmb_flags = 0;
- u64 flags = pgprot_val(prot);
-
- if (flags & _PAGE_CACHABLE)
- pmb_flags |= PMB_C;
- if (flags & _PAGE_WT)
- pmb_flags |= PMB_WT | PMB_UB;
-
- return pmb_flags;
-}
-
-static inline bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
-{
- return (b->vpn == (a->vpn + a->size)) &&
- (b->ppn == (a->ppn + a->size)) &&
- (b->flags == a->flags);
-}
-
-static bool pmb_mapping_exists(unsigned long vaddr, phys_addr_t phys,
- unsigned long size)
-{
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe, *iter;
- unsigned long span;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * See if VPN and PPN are bounded by an existing mapping.
- */
- if ((vaddr < pmbe->vpn) || (vaddr >= (pmbe->vpn + pmbe->size)))
- continue;
- if ((phys < pmbe->ppn) || (phys >= (pmbe->ppn + pmbe->size)))
- continue;
-
- /*
- * Now see if we're in range of a simple mapping.
- */
- if (size <= pmbe->size) {
- read_unlock(&pmb_rwlock);
- return true;
- }
-
- span = pmbe->size;
-
- /*
- * Finally for sizes that involve compound mappings, walk
- * the chain.
- */
- for (iter = pmbe->link; iter; iter = iter->link)
- span += iter->size;
-
- /*
- * Nothing else to do if the range requirements are met.
- */
- if (size <= span) {
- read_unlock(&pmb_rwlock);
- return true;
- }
- }
-
- read_unlock(&pmb_rwlock);
- return false;
-}
-
-static bool pmb_size_valid(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return true;
-
- return false;
-}
-
-static inline bool pmb_addr_valid(unsigned long addr, unsigned long size)
-{
- return (addr >= P1SEG && (addr + size - 1) < P3SEG);
-}
-
-static inline bool pmb_prot_valid(pgprot_t prot)
-{
- return (pgprot_val(prot) & _PAGE_USER) == 0;
-}
-
-static int pmb_size_to_flags(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return pmb_sizes[i].flag;
-
- return 0;
-}
-
-static int pmb_alloc_entry(void)
-{
- int pos;
-
- pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
- if (pos >= 0 && pos < NR_PMB_ENTRIES)
- __set_bit(pos, pmb_map);
- else
- pos = -ENOSPC;
-
- return pos;
-}
-
-static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int entry)
-{
- struct pmb_entry *pmbe;
- unsigned long irqflags;
- void *ret = NULL;
- int pos;
-
- write_lock_irqsave(&pmb_rwlock, irqflags);
-
- if (entry == PMB_NO_ENTRY) {
- pos = pmb_alloc_entry();
- if (unlikely(pos < 0)) {
- ret = ERR_PTR(pos);
- goto out;
- }
- } else {
- if (__test_and_set_bit(entry, pmb_map)) {
- ret = ERR_PTR(-ENOSPC);
- goto out;
- }
-
- pos = entry;
- }
-
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
-
- pmbe = &pmb_entry_list[pos];
-
- memset(pmbe, 0, sizeof(struct pmb_entry));
-
- raw_spin_lock_init(&pmbe->lock);
-
- pmbe->vpn = vpn;
- pmbe->ppn = ppn;
- pmbe->flags = flags;
- pmbe->entry = pos;
-
- return pmbe;
-
-out:
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
- return ret;
-}
-
-static void pmb_free(struct pmb_entry *pmbe)
-{
- __clear_bit(pmbe->entry, pmb_map);
-
- pmbe->entry = PMB_NO_ENTRY;
- pmbe->link = NULL;
-}
-
-/*
- * Must be run uncached.
- */
-static void __set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- jump_to_uncached();
-
- /* Set V-bit */
- __raw_writel(pmbe->vpn | PMB_V, addr);
- __raw_writel(pmbe->ppn | pmbe->flags | PMB_V, data);
-
- back_to_cached();
-}
-
-static void __clear_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
- unsigned long addr_val, data_val;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /* Clear V-bit */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
-}
-
-#ifdef CONFIG_PM
-static void set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
- __set_pmb_entry(pmbe);
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
-}
-#endif /* CONFIG_PM */
-
-int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- struct pmb_entry *pmbp, *pmbe;
- unsigned long orig_addr, orig_size;
- unsigned long flags, pmb_flags;
- int i, mapped;
-
- if (size < SZ_16M)
- return -EINVAL;
- if (!pmb_addr_valid(vaddr, size))
- return -EFAULT;
- if (pmb_mapping_exists(vaddr, phys, size))
- return 0;
-
- orig_addr = vaddr;
- orig_size = size;
-
- flush_tlb_kernel_range(vaddr, vaddr + size);
-
- pmb_flags = pgprot_to_pmb_flags(prot);
- pmbp = NULL;
-
- do {
- for (i = mapped = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- if (size < pmb_sizes[i].size)
- continue;
-
- pmbe = pmb_alloc(vaddr, phys, pmb_flags |
- pmb_sizes[i].flag, PMB_NO_ENTRY);
- if (IS_ERR(pmbe)) {
- pmb_unmap_entry(pmbp, mapped);
- return PTR_ERR(pmbe);
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = pmb_sizes[i].size;
-
- __set_pmb_entry(pmbe);
-
- phys += pmbe->size;
- vaddr += pmbe->size;
- size -= pmbe->size;
-
- /*
- * Link adjacent entries that span multiple PMB
- * entries for easier tear-down.
- */
- if (likely(pmbp)) {
- raw_spin_lock_nested(&pmbp->lock,
- SINGLE_DEPTH_NESTING);
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- /*
- * Instead of trying smaller sizes on every
- * iteration (even if we succeed in allocating
- * space), try using pmb_sizes[i].size again.
- */
- i--;
- mapped++;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
- } while (size >= SZ_16M);
-
- flush_cache_vmap(orig_addr, orig_addr + orig_size);
-
- return 0;
-}
-
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- unsigned long vaddr;
- phys_addr_t offset, last_addr;
- phys_addr_t align_mask;
- unsigned long aligned;
- struct vm_struct *area;
- int i, ret;
-
- if (!pmb_iomapping_enabled)
- return NULL;
-
- /*
- * Small mappings need to go through the TLB.
- */
- if (size < SZ_16M)
- return ERR_PTR(-EINVAL);
- if (!pmb_prot_valid(prot))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (size >= pmb_sizes[i].size)
- break;
-
- last_addr = phys + size;
- align_mask = ~(pmb_sizes[i].size - 1);
- offset = phys & ~align_mask;
- phys &= align_mask;
- aligned = ALIGN(last_addr, pmb_sizes[i].size) - phys;
-
- /*
- * XXX: This should really start from uncached_end, but this
- * causes the MMU to reset, so for now we restrict it to the
- * 0xb000...0xc000 range.
- */
- area = __get_vm_area_caller(aligned, VM_IOREMAP, 0xb0000000,
- P3SEG, caller);
- if (!area)
- return NULL;
-
- area->phys_addr = phys;
- vaddr = (unsigned long)area->addr;
-
- ret = pmb_bolt_mapping(vaddr, phys, size, prot);
- if (unlikely(ret != 0))
- return ERR_PTR(ret);
-
- return (void __iomem *)(offset + (char *)vaddr);
-}
-
-int pmb_unmap(void __iomem *addr)
-{
- struct pmb_entry *pmbe = NULL;
- unsigned long vaddr = (unsigned long __force)addr;
- int i, found = 0;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- if (pmbe->vpn == vaddr) {
- found = 1;
- break;
- }
- }
- }
-
- read_unlock(&pmb_rwlock);
-
- if (found) {
- pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
- return 0;
- }
-
- return -EINVAL;
-}
-
-static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- do {
- struct pmb_entry *pmblink = pmbe;
-
- /*
- * We may be called before this pmb_entry has been
- * entered into the PMB table via set_pmb_entry(), but
- * that's OK because we've allocated a unique slot for
- * this entry in pmb_alloc() (even if we haven't filled
- * it yet).
- *
- * Therefore, calling __clear_pmb_entry() is safe as no
- * other mapping can be using that slot.
- */
- __clear_pmb_entry(pmbe);
-
- flush_cache_vunmap(pmbe->vpn, pmbe->vpn + pmbe->size);
-
- pmbe = pmblink->link;
-
- pmb_free(pmblink);
- } while (pmbe && --depth);
-}
-
-static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- unsigned long flags;
-
- if (unlikely(!pmbe))
- return;
-
- write_lock_irqsave(&pmb_rwlock, flags);
- __pmb_unmap_entry(pmbe, depth);
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-static void __init pmb_notify(void)
-{
- int i;
-
- pr_info("PMB: boot mappings:\n");
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- pr_info(" 0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
- pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
- pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-/*
- * Sync our software copy of the PMB mappings with those in hardware. The
- * mappings in the hardware PMB were either set up by the bootloader or
- * very early on by the kernel.
- */
-static void __init pmb_synchronize(void)
-{
- struct pmb_entry *pmbp = NULL;
- int i, j;
-
- /*
- * Run through the initial boot mappings, log the established
- * ones, and blow away anything that falls outside of the valid
- * PPN range. Specifically, we only care about existing mappings
- * that impact the cached/uncached sections.
- *
- * Note that touching these can be a bit of a minefield; the boot
- * loader can establish multi-page mappings with the same caching
- * attributes, so we need to ensure that we aren't modifying a
- * mapping that we're presently executing from, or may execute
- * from in the case of straddling page boundaries.
- *
- * In the future we will have to tidy up after the boot loader by
- * jumping between the cached and uncached mappings and tearing
- * down alternating mappings while executing from the other.
- */
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned long addr_val, data_val;
- unsigned long ppn, vpn, flags;
- unsigned long irqflags;
- unsigned int size;
- struct pmb_entry *pmbe;
-
- addr = mk_pmb_addr(i);
- data = mk_pmb_data(i);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /*
- * Skip over any bogus entries
- */
- if (!(data_val & PMB_V) || !(addr_val & PMB_V))
- continue;
-
- ppn = data_val & PMB_PFN_MASK;
- vpn = addr_val & PMB_PFN_MASK;
-
- /*
- * Only preserve in-range mappings.
- */
- if (!pmb_ppn_in_range(ppn)) {
- /*
- * Invalidate anything out of bounds.
- */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
- continue;
- }
-
- /*
- * Update the caching attributes if necessary
- */
- if (data_val & PMB_C) {
- data_val &= ~PMB_CACHE_MASK;
- data_val |= pmb_cache_flags();
-
- writel_uncached(data_val, data);
- }
-
- size = data_val & PMB_SZ_MASK;
- flags = size | (data_val & PMB_CACHE_MASK);
-
- pmbe = pmb_alloc(vpn, ppn, flags, i);
- if (IS_ERR(pmbe)) {
- WARN_ON_ONCE(1);
- continue;
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, irqflags);
-
- for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
- if (pmb_sizes[j].flag == size)
- pmbe->size = pmb_sizes[j].size;
-
- if (pmbp) {
- raw_spin_lock_nested(&pmbp->lock, SINGLE_DEPTH_NESTING);
- /*
- * Compare the previous entry against the current one to
- * see if the entries span a contiguous mapping. If so,
- * setup the entry links accordingly. Compound mappings
- * are later coalesced.
- */
- if (pmb_can_merge(pmbp, pmbe))
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, irqflags);
- }
-}
-
-static void __init pmb_merge(struct pmb_entry *head)
-{
- unsigned long span, newsize;
- struct pmb_entry *tail;
- int i = 1, depth = 0;
-
- span = newsize = head->size;
-
- tail = head->link;
- while (tail) {
- span += tail->size;
-
- if (pmb_size_valid(span)) {
- newsize = span;
- depth = i;
- }
-
- /* This is the end of the line.. */
- if (!tail->link)
- break;
-
- tail = tail->link;
- i++;
- }
-
- /*
- * The merged page size must be valid.
- */
- if (!depth || !pmb_size_valid(newsize))
- return;
-
- head->flags &= ~PMB_SZ_MASK;
- head->flags |= pmb_size_to_flags(newsize);
-
- head->size = newsize;
-
- __pmb_unmap_entry(head->link, depth);
- __set_pmb_entry(head);
-}
-
-static void __init pmb_coalesce(void)
-{
- unsigned long flags;
- int i;
-
- write_lock_irqsave(&pmb_rwlock, flags);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * We're only interested in compound mappings
- */
- if (!pmbe->link)
- continue;
-
- /*
- * Nothing to do if it already uses the largest possible
- * page size.
- */
- if (pmbe->size == SZ_512M)
- continue;
-
- pmb_merge(pmbe);
- }
-
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-#ifdef CONFIG_UNCACHED_MAPPING
-static void __init pmb_resize(void)
-{
- int i;
-
- /*
- * If the uncached mapping was constructed by the kernel, it will
- * already be a reasonable size.
- */
- if (uncached_size == SZ_16M)
- return;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
- unsigned long flags;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- if (pmbe->vpn != uncached_start)
- continue;
-
- /*
- * Found it, now resize it.
- */
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = SZ_16M;
- pmbe->flags &= ~PMB_SZ_MASK;
- pmbe->flags |= pmb_size_to_flags(pmbe->size);
-
- uncached_resize(pmbe->size);
-
- __set_pmb_entry(pmbe);
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
-
- read_unlock(&pmb_rwlock);
-}
-#endif
-
-static int __init early_pmb(char *p)
-{
- if (!p)
- return 0;
-
- if (strstr(p, "iomap"))
- pmb_iomapping_enabled = 1;
-
- return 0;
-}
-early_param("pmb", early_pmb);
-
-void __init pmb_init(void)
-{
- /* Synchronize software state */
- pmb_synchronize();
-
- /* Attempt to combine compound mappings */
- pmb_coalesce();
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /* Resize initial mappings, if necessary */
- pmb_resize();
-#endif
-
- /* Log them */
- pmb_notify();
-
- writel_uncached(0, PMB_IRMCR);
-
- /* Flush out the TLB */
- local_flush_tlb_all();
- ctrl_barrier();
-}
-
-bool __in_29bit_mode(void)
-{
- return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
-}
-
-static int pmb_debugfs_show(struct seq_file *file, void *iter)
-{
- int i;
-
- seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
- "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
- seq_printf(file, "ety vpn ppn size flags\n");
-
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned int size;
- char *sz_str = NULL;
-
- addr = __raw_readl(mk_pmb_addr(i));
- data = __raw_readl(mk_pmb_data(i));
-
- size = data & PMB_SZ_MASK;
- sz_str = (size == PMB_SZ_16M) ? " 16MB":
- (size == PMB_SZ_64M) ? " 64MB":
- (size == PMB_SZ_128M) ? "128MB":
- "512MB";
-
- /* 02: V 0x88 0x08 128MB C CB B */
- seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
- i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
- (addr >> 24) & 0xff, (data >> 24) & 0xff,
- sz_str, (data & PMB_C) ? 'C' : ' ',
- (data & PMB_WT) ? "WT" : "CB",
- (data & PMB_UB) ? "UB" : " B");
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(pmb_debugfs);
-
-static int __init pmb_debugfs_init(void)
-{
- debugfs_create_file("pmb", S_IFREG | S_IRUGO, arch_debugfs_dir, NULL,
- &pmb_debugfs_fops);
- return 0;
-}
-subsys_initcall(pmb_debugfs_init);
-
-#ifdef CONFIG_PM
-static void pmb_syscore_resume(void)
-{
- struct pmb_entry *pmbe;
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- set_pmb_entry(pmbe);
- }
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-static struct syscore_ops pmb_syscore_ops = {
- .resume = pmb_syscore_resume,
-};
-
-static int __init pmb_sysdev_init(void)
-{
- register_syscore_ops(&pmb_syscore_ops);
- return 0;
-}
-subsys_initcall(pmb_sysdev_init);
-#endif
diff --git a/arch/sh/mm/sram.c b/arch/sh/mm/sram.c
deleted file mode 100644
index 2d8fa718d55e74..00000000000000
--- a/arch/sh/mm/sram.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SRAM pool for tiny memories not otherwise managed.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <asm/sram.h>
-
-/*
- * This provides a standard SRAM pool for tiny memories that can be
- * added either by the CPU or the platform code. Typical SRAM sizes
- * to be inserted in to the pool will generally be less than the page
- * size, with anything more reasonably sized handled as a NUMA memory
- * node.
- */
-struct gen_pool *sram_pool;
-
-static int __init sram_pool_init(void)
-{
- /*
- * This is a global pool, we don't care about node locality.
- */
- sram_pool = gen_pool_create(1, -1);
- if (unlikely(!sram_pool))
- return -ENOMEM;
-
- return 0;
-}
-core_initcall(sram_pool_init);
diff --git a/arch/sh/mm/tlb-debugfs.c b/arch/sh/mm/tlb-debugfs.c
deleted file mode 100644
index 11c6148283f3c7..00000000000000
--- a/arch/sh/mm/tlb-debugfs.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/sh/mm/tlb-debugfs.c
- *
- * debugfs ops for SH-4 ITLB/UTLBs.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-enum tlb_type {
- TLB_TYPE_ITLB,
- TLB_TYPE_UTLB,
-};
-
-static struct {
- int bits;
- const char *size;
-} tlb_sizes[] = {
- { 0x0, " 1KB" },
- { 0x1, " 4KB" },
- { 0x2, " 8KB" },
- { 0x4, " 64KB" },
- { 0x5, "256KB" },
- { 0x7, " 1MB" },
- { 0x8, " 4MB" },
- { 0xc, " 64MB" },
-};
-
-static int tlb_seq_show(struct seq_file *file, void *iter)
-{
- unsigned int tlb_type = (unsigned int)file->private;
- unsigned long addr1, addr2, data1, data2;
- unsigned long flags;
- unsigned long mmucr;
- unsigned int nentries, entry;
- unsigned int urb;
-
- mmucr = __raw_readl(MMUCR);
- if ((mmucr & 0x1) == 0) {
- seq_printf(file, "address translation disabled\n");
- return 0;
- }
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- local_irq_save(flags);
- jump_to_uncached();
-
- urb = (mmucr & MMUCR_URB) >> MMUCR_URB_SHIFT;
-
- /* Make the "entry >= urb" test fail. */
- if (urb == 0)
- urb = MMUCR_URB_NENTRIES + 1;
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- seq_printf(file, "entry: vpn ppn asid size valid wired\n");
-
- for (entry = 0; entry < nentries; entry++) {
- unsigned long vpn, ppn, asid, size;
- unsigned long valid;
- unsigned long val;
- const char *sz = " ?";
- int i;
-
- val = __raw_readl(addr1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- vpn = val & 0xfffffc00;
- valid = val & 0x100;
-
- val = __raw_readl(addr2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- asid = val & MMU_CONTEXT_ASID_MASK;
-
- val = __raw_readl(data1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- ppn = (val & 0x0ffffc00) << 4;
-
- val = __raw_readl(data2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- size = (val & 0xf0) >> 4;
-
- for (i = 0; i < ARRAY_SIZE(tlb_sizes); i++) {
- if (tlb_sizes[i].bits == size)
- break;
- }
-
- if (i != ARRAY_SIZE(tlb_sizes))
- sz = tlb_sizes[i].size;
-
- seq_printf(file, "%2d: 0x%08lx 0x%08lx %5lu %s %s %s\n",
- entry, vpn, ppn, asid,
- sz, valid ? "V" : "-",
- (urb <= entry) ? "W" : "-");
- }
-
- back_to_cached();
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int tlb_debugfs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, tlb_seq_show, inode->i_private);
-}
-
-static const struct file_operations tlb_debugfs_fops = {
- .owner = THIS_MODULE,
- .open = tlb_debugfs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init tlb_debugfs_init(void)
-{
- debugfs_create_file("itlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_ITLB, &tlb_debugfs_fops);
- debugfs_create_file("utlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_UTLB, &tlb_debugfs_fops);
- return 0;
-}
-module_init(tlb_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
deleted file mode 100644
index 4db21adfe5deba..00000000000000
--- a/arch/sh/mm/tlb-pteaex.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/sh/mm/tlb-pteaex.c
- *
- * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = address & MMU_VPN_MASK;
- __raw_writel(vpn, MMU_PTEH);
-
- /* Set PTEAEX */
- __raw_writel(get_asid(), MMU_PTEAEX);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-/*
- * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
- * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
- * address arrays. In compat mode the second array is inaccessible, while
- * in extended mode, the legacy 8-bit ASID field in address array 1 has
- * undefined behaviour.
- */
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- jump_to_uncached();
- __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
deleted file mode 100644
index fb400afc2a496a..00000000000000
--- a/arch/sh/mm/tlb-sh3.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh3.c
- *
- * SH-3 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte_val(pte);
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
- int i, ways = MMU_NTLB_WAYS;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
- data = (page & 0xfffe0000) | asid; /* VALID bit is off */
-
- if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) {
- addr |= MMU_PAGE_ASSOC_BIT;
- ways = 1; /* we already know the way .. */
- }
-
- for (i = 0; i < ways; i++)
- __raw_writel(data, addr + (i << 8));
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
-
- /*
- * Flush all the TLB.
- *
- * Write to the MMU control register's bit:
- * TF-bit for SH-3, TI-bit for SH-4.
- * It's same position, bit #2.
- */
- local_irq_save(flags);
- status = __raw_readl(MMUCR);
- status |= 0x04;
- __raw_writel(status, MMUCR);
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
deleted file mode 100644
index aa0a9f4680a1b1..00000000000000
--- a/arch/sh/mm/tlb-sh4.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh4.c
- *
- * SH-4 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#else
- if (cpu_data->flags & CPU_HAS_PTEA) {
- /* The last 3 bits and the first one of pteval contains
- * the PTEA timing control and space attribute bits
- */
- __raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
- }
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
- data = page | asid; /* VALID bit is off */
- jump_to_uncached();
- __raw_writel(data, addr);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c
deleted file mode 100644
index c92ce20db39bf4..00000000000000
--- a/arch/sh/mm/tlb-urb.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/sh/mm/tlb-urb.c
- *
- * TLB entry wiring helpers for URB-equipped parts.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/*
- * Load the entry for 'addr' into the TLB and wire the entry.
- */
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URC;
-
- /*
- * Make sure we're not trying to wire the last TLB entry slot.
- */
- BUG_ON(!--urb);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- /*
- * Insert this entry into the highest non-wired TLB slot (via
- * the URC field).
- */
- status |= (urb << MMUCR_URC_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- /* Load the entry into the TLB */
- __update_tlb(vma, addr, pte);
-
- /* ... and wire it up. */
- status = __raw_readl(MMUCR);
-
- status &= ~MMUCR_URB;
- status |= (urb << MMUCR_URB_SHIFT);
-
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
-
-/*
- * Unwire the last wired TLB entry.
- *
- * It should also be noted that it is not possible to wire and unwire
- * TLB entries in an arbitrary order. If you wire TLB entry N, followed
- * by entry N+1, you must unwire entry N+1 first, then entry N. In this
- * respect, it works like a stack or LIFO queue.
- */
-void tlb_unwire_entry(void)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URB;
-
- /*
- * Make sure we're not trying to unwire a TLB entry when none
- * have been wired.
- */
- BUG_ON(urb++ == MMUCR_URB_NENTRIES);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- status |= (urb << MMUCR_URB_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlbex_32.c b/arch/sh/mm/tlbex_32.c
deleted file mode 100644
index 1c53868632ee4c..00000000000000
--- a/arch/sh/mm/tlbex_32.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * TLB miss handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <asm/mmu_context.h>
-#include <asm/thread_info.h>
-
-/*
- * Called with interrupts disabled.
- */
-asmlinkage int __kprobes
-handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
-
- /*
- * We don't take page faults for P1, P2, and parts of P4, these
- * are always mapped, whether it be due to legacy behaviour in
- * 29-bit mode, or due to PMB configuration in 32-bit mode.
- */
- if (address >= P3SEG && address < P3_ADDR_MAX) {
- pgd = pgd_offset_k(address);
- } else {
- if (unlikely(address >= TASK_SIZE || !current->mm))
- return 1;
-
- pgd = pgd_offset(current->mm, address);
- }
-
- p4d = p4d_offset(pgd, address);
- if (p4d_none_or_clear_bad(p4d))
- return 1;
- pud = pud_offset(p4d, address);
- if (pud_none_or_clear_bad(pud))
- return 1;
- pmd = pmd_offset(pud, address);
- if (pmd_none_or_clear_bad(pmd))
- return 1;
- pte = pte_offset_kernel(pmd, address);
- entry = *pte;
- if (unlikely(pte_none(entry) || pte_not_present(entry)))
- return 1;
- if (unlikely(error_code && !pte_write(entry)))
- return 1;
-
- if (error_code)
- entry = pte_mkdirty(entry);
- entry = pte_mkyoung(entry);
-
- set_pte(pte, entry);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
- /*
- * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
- * the case of an initial page write exception, so we need to
- * flush it in order to avoid potential TLB entry duplication.
- */
- if (error_code == FAULT_CODE_INITIAL)
- local_flush_tlb_one(get_asid(), address & PAGE_MASK);
-#endif
-
- set_thread_fault_code(error_code);
- update_mmu_cache(NULL, address, pte);
-
- return 0;
-}
diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c
deleted file mode 100644
index a6a20d6de4c0b9..00000000000000
--- a/arch/sh/mm/tlbflush_32.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * TLB flushing operations for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned int cpu = smp_processor_id();
-
- if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) {
- unsigned long flags;
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, vma->vm_mm);
- page &= PAGE_MASK;
-
- local_irq_save(flags);
- if (vma->vm_mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- local_flush_tlb_one(asid, page);
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- } else {
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- if (mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- local_flush_tlb_all();
- } else {
- unsigned long asid;
- unsigned long saved_asid = get_asid();
-
- asid = cpu_asid(cpu, &init_mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- set_asid(asid);
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Invalidate all TLB of this process. */
- /* Instead of invalidating each TLB, we get new MMU context. */
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
-
- local_irq_save(flags);
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- local_irq_restore(flags);
- }
-}
-
-void __flush_tlb_global(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- /*
- * This is the most destructive of the TLB flushing options,
- * and will tear down all of the UTLB/ITLB mappings, including
- * wired entries.
- */
- __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
deleted file mode 100644
index bd1585e8efed92..00000000000000
--- a/arch/sh/mm/uncached.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sizes.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-
-/*
- * This is the offset of the uncached section from its cached alias.
- *
- * Legacy platforms handle trivial transitions between cached and
- * uncached segments by making use of the 1:1 mapping relationship in
- * 512MB lowmem, others via a special uncached mapping.
- *
- * Default value only valid in 29 bit mode, in 32bit mode this will be
- * updated by the early PMB initialization code.
- */
-unsigned long cached_to_uncached = SZ_512M;
-unsigned long uncached_size = SZ_512M;
-unsigned long uncached_start, uncached_end;
-EXPORT_SYMBOL(uncached_start);
-EXPORT_SYMBOL(uncached_end);
-
-int virt_addr_uncached(unsigned long kaddr)
-{
- return (kaddr >= uncached_start) && (kaddr < uncached_end);
-}
-EXPORT_SYMBOL(virt_addr_uncached);
-
-void __init uncached_init(void)
-{
-#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
- uncached_start = P2SEG;
-#else
- uncached_start = memory_end;
-#endif
- uncached_end = uncached_start + uncached_size;
-}
-
-void __init uncached_resize(unsigned long size)
-{
- uncached_size = size;
- uncached_end = uncached_start + uncached_size;
-}
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
deleted file mode 100644
index e5ba31c79fe0af..00000000000000
--- a/arch/sh/tools/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# arch/sh/tools/Makefile
-#
-# Copyright (C) 2003 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Shamelessly cloned from ARM.
-#
-
-include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
- @echo ' Generating $@'
- $(Q)mkdir -p $(dir $@)
- $(Q)LC_ALL=C $(AWK) -f $^ > $@
diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types
deleted file mode 100644
index 6d7c2d8eaf5504..00000000000000
--- a/arch/sh/tools/gen-mach-types
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/awk
-# SPDX-License-Identifier: GPL-2.0
-#
-# Awk script to generate include/generated/machtypes.h
-# Heavily based on arch/arm/tools/gen-mach-types
-#
-BEGIN { nr = 0 }
-/^#/ { next }
-/^[ ]*$/ { next }
-
-NF == 2 {
- mach[nr] = $1;
- config[nr] = "CONFIG_"$2;
- nr++;
- }
-
-END {
- printf("/*\n");
- printf(" * Automagically generated, don't touch.\n");
- printf(" */\n");
- printf("#ifndef __ASM_SH_MACHTYPES_H\n");
- printf("#define __ASM_SH_MACHTYPES_H\n");
- printf("\n");
- printf("/*\n");
- printf(" * We'll use the following MACH_xxx defs for placeholders for the time\n");
- printf(" * being .. these will all go away once sh_machtype is assigned per-board.\n");
- printf(" *\n");
- printf(" * For now we leave things the way they are for backwards compatibility.\n");
- printf(" */\n");
- printf("\n");
- printf("/* Mach types */\n");
-
- for (i = 0; i < nr; i++) {
- printf("#ifdef %s\n", config[i]);
- printf(" #define MACH_%s\t\t1\n", mach[i]);
- printf("#else\n");
- printf(" #define MACH_%s\t\t0\n", mach[i]);
- printf("#endif\n");
- }
-
- printf("\n");
- printf("/* Machtype checks */\n");
- for (i = 0; i < nr; i++)
- printf("#define mach_is_%s()\t\t\t(MACH_%s)\n",
- tolower(mach[i]), mach[i]);
- printf("\n");
- printf("#endif /* __ASM_SH_MACHTYPES_H */\n");
- }
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
deleted file mode 100644
index 29e648855d509f..00000000000000
--- a/arch/sh/tools/mach-types
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# MACH_<xxx> CONFIG_<xxx>
-#
-
-#
-# List of board groups.
-#
-SE SH_SOLUTION_ENGINE
-HIGHLANDER SH_HIGHLANDER
-RTS7751R2D SH_RTS7751R2D
-RSK SH_RSK
-ALPHA_BOARD SH_ALPHA_BOARD
-
-#
-# List of companion chips / MFDs.
-#
-HD64461 HD64461
-
-#
-# List of boards.
-#
-7206SE SH_7206_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
-7619SE SH_7619_SOLUTION_ENGINE
-7721SE SH_7721_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7724SE SH_7724_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7780SE SH_7780_SOLUTION_ENGINE
-HP6XX SH_HP6XX
-DREAMCAST SH_DREAMCAST
-SNAPGEAR SH_SECUREEDGE5410
-EDOSK7705 SH_EDOSK7705
-EDOSK7760 SH_EDOSK7760
-SDK7786 SH_SDK7786
-SH4202_MICRODEV SH_SH4202_MICRODEV
-SH03 SH_SH03
-LANDISK SH_LANDISK
-R7780RP SH_R7780RP
-R7780MP SH_R7780MP
-R7785RP SH_R7785RP
-TITAN SH_TITAN
-SHMIN SH_SHMIN
-LBOXRE2 SH_LBOX_RE2
-X3PROTO SH_X3PROTO
-MAGICPANELR2 SH_MAGIC_PANEL_R2
-R2D_PLUS RTS7751R2D_PLUS
-R2D_1 RTS7751R2D_1
-SDK7780 SH_SDK7780
-MIGOR SH_MIGOR
-RSK7201 SH_RSK7201
-RSK7203 SH_RSK7203
-RSK7264 SH_RSK7264
-RSK7269 SH_RSK7269
-AP325RXA SH_AP325RXA
-SH2007 SH_SH2007
-SH7757LCR SH_SH7757LCR
-SH7763RDP SH_SH7763RDP
-SH7785LCR SH_SH7785LCR
-SH7785LCR_PT SH_SH7785LCR_PT
-URQUELL SH_URQUELL
-ESPT SH_ESPT
-POLARIS SH_POLARIS
-KFR2R09 SH_KFR2R09
-ECOVEC SH_ECOVEC
-APSH4A3A SH_APSH4A3A
-APSH4AD0A SH_APSH4AD0A
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7b952aa52c0b99..7fed3529bbaf82 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -26,10 +26,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_cmt_device;
/*
@@ -1170,10 +1166,6 @@ static void __exit sh_cmt_exit(void)
platform_driver_unregister(&sh_cmt_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
-#endif
-
subsys_initcall(sh_cmt_init);
module_exit(sh_cmt_exit);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 169a1fccc49749..e81e978513f80e 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -23,10 +23,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_mtu2_device;
struct sh_mtu2_channel {
@@ -521,10 +517,6 @@ static void __exit sh_mtu2_exit(void)
platform_driver_unregister(&sh_mtu2_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_mtu2_device_driver);
-#endif
-
subsys_initcall(sh_mtu2_init);
module_exit(sh_mtu2_exit);
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index b00dec0655cb28..596e9146ad54e9 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -24,10 +24,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
enum sh_tmu_model {
SH_TMU,
SH_TMU_SH3,
@@ -670,10 +666,6 @@ static void __exit sh_tmu_exit(void)
platform_driver_unregister(&sh_tmu_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
-#endif
-
subsys_initcall(sh_tmu_init);
module_exit(sh_tmu_exit);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a7bfddf08fa7ba..22602c512a6e50 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1027,7 +1027,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
@@ -1112,7 +1112,7 @@ config I2C_SYNQUACER
config I2C_TEGRA
tristate "NVIDIA Tegra internal I2C controller"
- depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC))
+ depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SPARC))
# COMPILE_TEST needs architectures with readsX()/writesX() primitives
help
If you say yes to this option, support will be included for the
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index ed788e991f74b3..0231672a7e1c32 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_RENESAS_CEU
tristate "Renesas Capture Engine Unit (CEU) driver"
depends on V4L_PLATFORM_DRIVERS
depends on VIDEO_DEV
- depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
+ depends on ARCH_R7S72100 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5e19a961c34d7b..4d421d4030b7c9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -720,7 +720,7 @@ config MMC_TMIO
config MMC_SDHI
tristate "Renesas SDHI SD/SDIO controller support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select MMC_TMIO_CORE
select RESET_CONTROLLER if ARCH_RENESAS
help
@@ -730,7 +730,7 @@ config MMC_SDHI
config MMC_SDHI_SYS_DMAC
tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
depends on MMC_SDHI
- default MMC_SDHI if (SUPERH || ARM)
+ default MMC_SDHI if ARM
help
This provides DMA support for SDHI SD/SDIO controllers
using SYS-DMAC via DMA Engine. This supports the controllers
@@ -882,7 +882,7 @@ config MMC_DW_ROCKCHIP
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF) found in various
Renesas SoCs for SH and ARM architectures.
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 0fd4c9d644dd51..96b9a19697b985 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -427,21 +427,12 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host)
host->dma_active = false;
/* We can only either use DMA for both Tx and Rx or not use it at all */
- if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) {
- struct sh_mmcif_plat_data *pdata = dev->platform_data;
-
- host->chan_tx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_tx);
- host->chan_rx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_rx);
- } else {
- host->chan_tx = dma_request_chan(dev, "tx");
- if (IS_ERR(host->chan_tx))
- host->chan_tx = NULL;
- host->chan_rx = dma_request_chan(dev, "rx");
- if (IS_ERR(host->chan_rx))
- host->chan_rx = NULL;
- }
+ host->chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(host->chan_tx))
+ host->chan_tx = NULL;
+ host->chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(host->chan_rx))
+ host->chan_rx = NULL;
dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx,
host->chan_rx);
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342f2..eb90de04c88419 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -31,7 +31,7 @@ config PCMCIA_AXNET
config AX88796
tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
- depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
+ depends on (ARM || MIPS || ZORRO || COMPILE_TEST)
select CRC32
select PHYLIB
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 3ceb57408ed0c0..c48164ec682f50 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_RENESAS
config SH_ETH
tristate "Renesas SuperH Ethernet support"
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select CRC32
select MII
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b97..a6ddc3d07534ad 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_SMSC
default y
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
ISA || MAC || MIPS || NIOS2 || PCI || \
- PCMCIA || SUPERH || XTENSA || COMPILE_TEST
+ PCMCIA || XTENSA || COMPILE_TEST
help
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -40,7 +40,7 @@ config SMC91X
select MII
depends on !OF || GPIOLIB
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
- MIPS || NIOS2 || SUPERH || XTENSA || COMPILE_TEST
+ MIPS || NIOS2 || XTENSA || COMPILE_TEST
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 677d2601d30571..db9e2c516b5ff1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1452,7 +1452,7 @@ config RTC_DRV_SA1100
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on SUPERH || ARCH_RENESAS
+ depends on ARCH_RENESAS
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors. This RTC is also found in RZ/A SoCs.
@@ -1544,7 +1544,7 @@ config RTC_DRV_GENERIC
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
+ depends on PARISC || M68K || PPC || COMPILE_TEST
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index cd146b5741431f..2151a3b7c5b986 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -25,15 +25,12 @@
#include <linux/log2.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#ifdef CONFIG_SUPERH
-#include <asm/rtc.h>
-#else
+
/* Default values for RZ/A RTC */
#define rtc_reg_size sizeof(u16)
#define RTC_BIT_INVERTED 0 /* no chip bugs */
#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-#endif
#define DRV_NAME "sh-rtc"
@@ -537,19 +534,6 @@ static int __init sh_rtc_probe(struct platform_device *pdev)
rtc->capabilities = RTC_DEF_CAPABILITIES;
-#ifdef CONFIG_SUPERH
- if (dev_get_platdata(&pdev->dev)) {
- struct sh_rtc_platform_info *pinfo =
- dev_get_platdata(&pdev->dev);
-
- /*
- * Some CPUs have special capabilities in addition to the
- * default set. Add those in here.
- */
- rtc->capabilities |= pinfo->capabilities;
- }
-#endif
-
if (rtc->carry_irq <= 0) {
/* register shared periodic/carry/alarm irq */
ret = devm_request_irq(&pdev->dev, rtc->periodic_irq,
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3b1c0878bb8572..2c5226adf5e1d3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -809,7 +809,7 @@ config SPI_RPCIF
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for Renesas RSPI and QSPI blocks.
@@ -878,7 +878,7 @@ config SPI_SC18IS602
config SPI_SH_MSIOF
tristate "SuperH MSIOF SPI controller"
depends on HAVE_CLK
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c55b947f3cdbb7..32f8ffd423cbb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -641,7 +641,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -650,7 +650,6 @@ config SERIAL_SH_SCI_NR_UARTS
range 1 64 if 64BIT
range 1 32 if !64BIT
depends on SERIAL_SH_SCI
- default "10" if SUPERH
default "18" if ARCH_RENESAS
default "2"
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7bd0807209299b..cc475670181529 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -49,11 +49,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#ifdef CONFIG_SUPERH
-#include <asm/sh_bios.h>
-#include <asm/platform_early.h>
-#endif
-
#include "serial_mctrl_gpio.h"
#include "sh-sci.h"
@@ -3050,49 +3045,6 @@ static struct console serial_console = {
.data = &sci_uart_driver,
};
-#ifdef CONFIG_SUPERH
-static char early_serial_buf[32];
-
-static int early_serial_console_setup(struct console *co, char *options)
-{
- /*
- * This early console is always registered using the earlyprintk=
- * parameter, which does not call add_preferred_console(). Thus
- * @options is always NULL and the options for this early console
- * are passed using a custom buffer.
- */
- WARN_ON(options);
-
- return serial_console_setup(co, early_serial_buf);
-}
-
-static struct console early_serial_console = {
- .name = "early_ttySC",
- .write = serial_console_write,
- .setup = early_serial_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int sci_probe_earlyprintk(struct platform_device *pdev)
-{
- const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
-
- if (early_serial_console.data)
- return -EEXIST;
-
- early_serial_console.index = pdev->id;
-
- sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
-
- if (!strstr(early_serial_buf, "keep"))
- early_serial_console.flags |= CON_BOOT;
-
- register_console(&early_serial_console);
- return 0;
-}
-#endif
-
#define SCI_CONSOLE (&serial_console)
#else
@@ -3323,11 +3275,6 @@ static int sci_probe(struct platform_device *dev)
* the special early probe. We don't have sufficient device state
* to make it beyond this yet.
*/
-#ifdef CONFIG_SUPERH
- if (is_sh_early_platform_device(dev))
- return sci_probe_earlyprintk(dev);
-#endif
-
if (dev->dev.of_node) {
p = sci_parse_dt(dev, &dev_id);
if (IS_ERR(p))
@@ -3421,10 +3368,6 @@ static void __exit sci_exit(void)
uart_unregister_driver(&sci_uart_driver);
}
-#if defined(CONFIG_SUPERH) && defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-sh_early_platform_init_buffer("earlyprintk", &sci_driver,
- early_serial_buf, ARRAY_SIZE(early_serial_buf));
-#endif
#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
static struct plat_sci_port port_cfg __initdata;
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index be8313cdbac360..fa9082f941feeb 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1275,7 +1275,7 @@ static void kbd_bh(struct tasklet_struct *unused)
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
- defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+ defined(CONFIG_PARISC) ||\
(defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
static inline bool kbd_is_hw_raw(const struct input_dev *dev)
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index d6b3fef3e55b03..be240d11cfb49a 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -6,7 +6,7 @@
config USB_RENESAS_USBHS
tristate 'Renesas USBHS controller'
depends on USB_GADGET
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in
help
Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 22cea5082ac461..9860caa3512816 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -7,7 +7,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 6d6f8c08792dc8..e75b514b721b3f 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -53,19 +53,4 @@ config LOGO_SUN_CLUT224
depends on SPARC
default y
-config LOGO_SUPERH_MONO
- bool "Black and white SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_VGA16
- bool "16-color SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_CLUT224
- bool "224-color SuperH Linux logo"
- depends on SUPERH
- default y
-
endif # LOGO
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 895c60b8402ea1..c4f348fa400741 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -10,9 +10,6 @@ obj-$(CONFIG_LOGO_MAC_CLUT224) += logo_mac_clut224.o
obj-$(CONFIG_LOGO_PARISC_CLUT224) += logo_parisc_clut224.o
obj-$(CONFIG_LOGO_SGI_CLUT224) += logo_sgi_clut224.o
obj-$(CONFIG_LOGO_SUN_CLUT224) += logo_sun_clut224.o
-obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_superh_mono.o
-obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
-obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 141f15a9a45906..0269def4262117 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -52,10 +52,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_MONO
/* Generic Linux logo */
logo = &logo_linux_mono;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_MONO
- /* SuperH Linux logo */
- logo = &logo_superh_mono;
#endif
}
@@ -63,10 +59,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_VGA16
/* Generic Linux logo */
logo = &logo_linux_vga16;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_VGA16
- /* SuperH Linux logo */
- logo = &logo_superh_vga16;
#endif
}
@@ -95,10 +87,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_SUN_CLUT224
/* Sun Linux logo */
logo = &logo_sun_clut224;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_CLUT224
- /* SuperH Linux logo */
- logo = &logo_superh_clut224;
#endif
}
return logo;
diff --git a/drivers/video/logo/logo_superh_clut224.ppm b/drivers/video/logo/logo_superh_clut224.ppm
deleted file mode 100644
index 0241aacee18009..00000000000000
--- a/drivers/video/logo/logo_superh_clut224.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 224-color SuperH Linux logo
-80 80
-255
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 10 10 10 10 10 10
- 10 10 10 6 6 6 6 6 6 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 10 10 10 14 14 13
- 22 22 22 26 26 26 30 30 30 34 34 34
- 30 30 30 30 30 30 26 26 26 18 18 18
- 14 14 13 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 26 26 26 42 42 43
- 54 54 54 66 66 66 78 78 78 78 78 78
- 78 78 78 74 74 74 66 66 66 54 54 54
- 42 42 43 26 26 26 18 18 18 10 10 10
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 22 22 22 42 42 43 66 66 66 86 86 86
- 66 66 66 38 38 38 38 38 38 22 22 22
- 26 26 26 34 34 34 54 54 54 66 66 66
- 86 86 86 70 70 70 46 46 46 26 26 26
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 50 50 50 82 82 82 58 58 58 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 54 54 54 86 86 86 66 66 66
- 38 38 38 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 78 78 78 34 34 34 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 70 70 70
- 78 78 78 46 46 46 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 42 42 43 82 82 82
- 26 26 26 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 46 46 46 34 34 34 6 6 6 2 2 6
- 42 42 43 78 78 78 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 30 30 30 66 66 66 58 58 58
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 86 86 86 102 102 102 46 46 46 10 10 10
- 2 2 6 58 58 58 70 70 70 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 86 86 86 10 10 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 30 30 30
- 94 94 93 94 94 93 58 58 58 26 26 26
- 2 2 6 6 6 6 78 78 78 54 54 54
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 62 62 62 62 62 62 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 54 54 54 38 38 38 18 18 18 10 10 10
- 2 2 6 2 2 6 34 34 34 82 82 82
- 38 38 38 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 10 10 10 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 54 54 54
- 66 66 66 26 26 26 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 82 82 82 2 2 6 2 2 6
- 2 2 6 6 6 6 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 6 6 6
- 14 14 13 10 10 10 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 18 18 18
- 82 82 82 34 34 34 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 6 6 6 6 6 6 22 22 22 34 34 34
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 34 34 34
- 10 10 10 50 50 50 22 22 22 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 86 86 86 42 42 43 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 38 38 38 118 118 118 94 94 93 22 22 22
- 22 22 22 2 2 6 2 2 6 2 2 6
- 14 14 13 86 86 86 138 138 142 163 163 163
-154 154 154 38 38 38 26 26 26 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 14 14 13
-134 134 134 198 198 196 194 194 194 118 118 118
- 10 10 10 2 2 6 2 2 6 6 6 6
-102 98 90 186 186 186 210 210 210 218 218 218
-214 214 214 134 134 134 14 14 13 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 50 50 50 18 18 18 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 54 54 54
-218 218 218 194 194 194 226 226 226 246 246 246
- 58 58 58 2 2 6 2 2 6 30 30 30
-210 210 210 254 254 254 174 174 174 122 122 122
-223 222 222 234 234 234 74 74 74 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 82 82 82 2 2 6 106 106 105
-170 170 170 26 26 26 86 86 86 226 226 226
-122 122 122 10 10 10 14 14 13 46 46 46
-230 230 228 190 190 187 6 6 6 70 70 70
- 89 90 90 238 238 238 158 158 158 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 86 86 86 6 6 6 118 118 118
-106 106 105 6 6 6 70 70 70 150 150 150
-130 130 130 18 18 18 38 38 38 54 54 54
-223 222 222 106 106 105 2 2 6 14 14 13
- 46 46 46 190 190 187 198 198 196 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 94 94 93 14 14 13 102 102 102
-130 130 130 2 2 6 18 18 18 118 118 118
-122 100 66 122 94 10 122 94 10 104 78 10
-163 163 163 106 106 105 2 2 6 2 2 6
- 2 2 6 194 194 194 194 194 194 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 89 90 90 14 14 13 58 58 58
-210 210 210 26 26 26 60 40 9 154 114 10
-226 170 10 241 186 13 229 174 11 186 146 17
-214 174 14 178 147 70 38 26 10 2 2 6
- 70 70 70 246 246 246 138 138 142 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 66 66 66 26 26 26 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 10 10 10
-194 194 194 190 166 114 195 134 10 229 174 11
-238 182 14 234 190 10 234 196 18 238 202 21
-246 206 46 244 212 20 234 196 18 186 146 17
-218 194 134 206 206 194 42 42 43 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 74 74 74 30 30 30 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 86 86 86 14 14 13 2 2 6
-122 86 26 195 134 10 220 162 10 238 182 14
-241 186 13 234 196 18 244 212 20 246 217 53
-246 217 53 246 217 39 244 212 20 244 212 20
-244 212 20 224 188 14 122 86 26 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 82 82 82 34 34 34 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 82 82 82 30 30 30 60 40 9
-181 122 9 204 146 11 229 174 11 238 182 14
-234 190 10 238 202 21 244 212 20 246 218 74
-246 217 39 244 212 20 244 212 20 244 212 20
-224 188 14 214 174 14 186 146 17 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 26 26 26 94 94 93 42 42 43 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 50 50 50 105 70 7
-195 134 10 219 158 11 238 178 14 241 186 13
-234 196 18 244 212 20 246 217 53 241 214 34
-244 212 20 244 212 20 244 212 20 197 151 13
-204 146 11 219 158 11 158 118 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 89 90 90 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 46 46 46 22 22 22
-138 94 6 210 162 12 238 182 14 238 190 10
-238 202 21 244 212 20 244 212 20 244 212 20
-244 212 20 202 164 20 186 134 10 211 150 11
-219 158 11 211 150 11 104 78 10 2 2 6
- 6 6 6 54 54 54 14 14 13 2 2 6
- 2 2 6 62 62 62 74 74 74 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 78 78 78 50 50 50 6 6 6
- 92 69 26 138 102 14 190 146 14 224 188 14
-238 202 21 234 196 18 214 174 14 190 146 14
-170 122 12 195 134 10 211 150 11 214 154 10
-202 147 31 182 158 106 102 98 90 2 2 6
- 2 2 6 78 78 78 118 118 118 58 58 58
- 2 2 6 22 22 22 89 90 90 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 50 50 50 6 6 6
-130 130 130 173 154 115 158 106 9 170 122 12
-197 151 13 186 146 17 197 139 12 204 146 11
-204 146 11 204 146 11 197 139 12 190 166 114
-194 194 194 198 198 196 174 174 174 14 14 13
- 2 2 6 22 22 22 118 118 118 118 118 118
- 22 22 22 2 2 6 74 74 74 70 70 70
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 102 102 102 26 26 26 10 10 10
-138 138 142 190 190 187 173 154 115 158 106 9
-197 139 12 204 146 11 197 139 12 195 134 10
-181 122 9 188 140 34 191 178 145 186 186 186
-201 202 203 223 222 222 214 214 214 66 66 66
- 2 2 6 2 2 6 50 50 50 62 62 62
- 6 6 6 2 2 6 10 10 10 89 90 90
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 34 34 34
- 74 74 74 74 74 74 2 2 6 6 6 6
-146 146 146 198 198 196 190 190 187 178 166 146
-154 122 54 158 106 9 158 106 9 170 126 38
-173 154 115 186 186 186 190 190 187 210 210 210
-246 246 246 254 254 254 254 254 254 182 182 182
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 62 62 62
- 74 74 74 34 34 34 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 22 22 22 54 54 54
- 94 94 93 18 18 18 2 2 6 46 46 46
-234 234 234 223 222 222 190 190 187 190 190 187
-190 190 187 186 186 186 186 186 186 190 190 187
-190 190 187 194 194 194 214 214 214 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
- 82 82 82 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 86 86 86 54 54 54 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 46 46 46 89 90 90
- 46 46 46 18 18 18 6 6 6 182 182 182
-254 254 254 246 246 246 206 206 206 190 190 187
-190 190 187 190 190 187 190 190 187 190 190 187
-206 206 206 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-201 202 203 14 14 13 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 86 86 86 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 14 14 13 38 38 38 74 74 74 66 66 66
- 2 2 6 6 6 6 89 90 90 250 250 250
-254 254 254 254 254 254 238 238 238 198 198 196
-190 190 187 190 190 187 194 194 194 223 222 222
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 82 82 82 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 78 78 78 70 70 70 34 34 34
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 34 34 34 66 66 66 78 78 78 6 6 6
- 2 2 6 18 18 18 218 218 218 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-226 226 226 230 230 228 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 174 174 174 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 18 18 18 89 90 90 62 62 62
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 58 58 58 89 90 90 18 18 18 2 2 6
- 2 2 6 110 110 110 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 18 18 18 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 94 94 93
- 54 54 54 26 26 26 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 89 90 90 26 26 26 2 2 6 2 2 6
- 14 14 13 194 194 194 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 242 242 242 54 54 54 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 86 86 86 50 50 50 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 38 38 38 82 82 82
- 34 34 34 2 2 6 2 2 6 2 2 6
- 42 42 43 194 194 194 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 242 242 242 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 246 246 246 238 238 238
-226 226 226 230 230 228 102 102 102 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 38 38 38 82 82 82 42 42 43 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 62 62 62 66 66 66
- 2 2 6 2 2 6 2 2 6 6 6 6
- 70 70 70 170 170 170 206 206 206 234 234 234
-246 246 246 250 250 250 250 250 250 238 238 238
-226 226 226 230 230 228 238 238 238 250 250 250
-250 250 250 250 250 250 246 246 246 230 230 228
-214 214 214 206 206 206 201 202 203 201 202 203
-198 198 196 201 202 203 182 182 182 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 62 62 62 66 66 66 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 82 82 82 18 18 18
- 2 2 6 2 2 6 2 2 6 10 10 10
- 94 94 93 182 182 182 218 218 218 242 242 242
-250 250 250 254 254 254 254 254 254 250 250 250
-234 234 234 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-238 238 238 226 226 226 210 210 210 201 202 203
-194 194 194 194 194 194 210 210 210 158 158 158
- 6 6 6 14 14 13 50 50 50 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 86 86 86 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 70 70 70 2 2 6
- 2 2 6 10 10 10 2 2 6 22 22 22
-166 166 166 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-230 230 228 206 206 206 198 198 196 226 226 226
- 94 94 93 2 2 6 6 6 6 38 38 38
- 30 30 30 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 62 62 62 66 66 66
- 26 26 26 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 74 74 74 50 50 50 2 2 6
- 26 26 26 26 26 26 2 2 6 106 106 105
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 218 218 218 201 202 203
-210 210 210 14 14 13 2 2 6 2 2 6
- 30 30 30 22 22 22 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 86 86 86
- 42 42 43 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 89 90 90 22 22 22 2 2 6
- 42 42 43 2 2 6 18 18 18 218 218 218
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 223 222 222
-218 218 218 102 102 102 2 2 6 14 14 13
- 18 18 18 38 38 38 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 58 58 58 22 22 22 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 82 82 82 2 2 6 26 26 26
- 22 22 22 2 2 6 122 122 122 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-238 238 238 198 198 196 6 6 6 38 38 38
- 58 58 58 26 26 26 38 38 38 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 78 78 78 30 30 30 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 30 30 30
- 74 74 74 58 58 58 2 2 6 42 42 43
- 2 2 6 22 22 22 230 230 228 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 46 46 46 38 38 38
- 42 42 43 14 14 13 38 38 38 14 14 13
- 2 2 6 2 2 6 2 2 6 6 6 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 42 42 43
- 89 90 90 18 18 18 18 18 18 26 26 26
- 2 2 6 118 118 118 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 94 94 93 6 6 6
- 2 2 6 2 2 6 10 10 10 34 34 34
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 26 26 26 66 66 66
- 82 82 82 2 2 6 38 38 38 6 6 6
- 14 14 13 210 210 210 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 246 246 246 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 146 146 146 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 74 74 74 30 30 30 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 42 42 43 89 90 90
- 26 26 26 6 6 6 42 42 43 2 2 6
- 74 74 74 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 242 242 242 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 182 182 182 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 10 10 10 86 86 86 38 38 38 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 66 66 66 82 82 82
- 2 2 6 22 22 22 18 18 18 2 2 6
-150 150 150 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 86 86 86 46 46 46 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 46 46 46 86 86 86 18 18 18
- 2 2 6 34 34 34 10 10 10 6 6 6
-210 210 210 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 223 222 222 6 6 6
- 2 2 6 2 2 6 6 6 6 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 26 26 26 66 66 66 62 62 62 2 2 6
- 2 2 6 38 38 38 10 10 10 26 26 26
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 6 6 6
- 2 2 6 2 2 6 10 10 10 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 78 78 78 6 6 6 2 2 6
- 2 2 6 46 46 46 14 14 13 42 42 43
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 10 10 10
- 2 2 6 2 2 6 22 22 22 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 74 74 74 2 2 6 2 2 6
- 14 14 13 70 70 70 34 34 34 62 62 62
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 14 14 13
- 2 2 6 2 2 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 62 62 62 2 2 6 2 2 6
- 2 2 6 30 30 30 46 46 46 70 70 70
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 226 226 226 10 10 10
- 2 2 6 6 6 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 22 22 22
- 58 58 58 62 62 62 2 2 6 2 2 6
- 2 2 6 2 2 6 30 30 30 78 78 78
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 22 22 22 34 34 34 18 14 6 22 22 22
- 26 26 26 18 18 18 6 6 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 26 26 26
- 62 62 62 106 106 105 74 51 11 186 134 10
-210 162 12 122 94 10 6 6 6 62 62 62
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 158 158 158 18 18 18
- 14 14 13 2 2 6 2 2 6 2 2 6
- 6 6 6 18 18 18 66 66 66 38 38 38
- 6 6 6 94 94 93 50 50 50 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 10 10 10 10 10 10 18 18 18 38 38 38
- 78 78 78 142 134 106 219 158 11 241 186 13
-246 190 14 246 190 14 158 118 10 10 10 10
- 89 90 90 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 230 190
-238 206 90 238 206 90 188 140 34 38 26 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 38 38 38 46 46 46
- 26 26 26 106 106 105 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 22 22 22
- 30 30 30 38 38 38 50 50 50 70 70 70
-106 106 105 188 140 34 226 170 10 241 186 13
-246 190 14 246 190 14 246 190 14 154 114 10
- 6 6 6 74 74 74 226 226 226 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 233 188 64
-240 198 14 244 212 20 234 196 18 38 30 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 30 30 30 26 26 26
-202 164 20 154 142 90 66 66 66 26 26 26
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 38 38 38 58 58 58
- 78 78 78 86 86 86 102 102 102 122 122 122
-178 147 70 211 150 11 234 174 12 246 186 14
-246 190 14 246 190 14 246 190 14 238 190 10
-104 78 10 2 2 6 46 46 46 198 198 196
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 222 175 59
-241 186 13 240 198 14 210 162 12 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 122 94 10
-238 202 21 234 196 18 82 82 82 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 38 38 38 70 70 70 154 122 54
-188 140 34 204 146 11 197 139 12 197 139 12
-214 154 10 226 170 10 241 186 13 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-229 174 11 49 35 6 2 2 6 22 22 22
-158 158 158 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 242 242 242 222 175 59
-238 182 14 241 186 13 214 154 10 49 35 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 60 40 9 229 174 11
-238 190 10 241 186 13 114 102 78 42 42 43
- 14 14 13 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 154 122 54 214 154 10
-226 170 10 229 174 11 226 170 10 226 170 10
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-240 198 14 186 146 17 10 10 10 2 2 6
- 6 6 6 118 118 118 242 242 242 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 198 198 196 206 170 74
-238 178 14 238 178 14 211 150 11 138 94 6
- 18 14 6 2 2 6 2 2 6 2 2 6
- 6 6 6 70 46 6 204 146 11 238 178 14
-238 182 14 238 182 14 126 114 90 58 58 58
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 70 70 70 182 134 38 226 170 10
-238 182 14 241 186 13 241 186 13 246 186 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 234 196 18 98 70 6 2 2 6
- 2 2 6 2 2 6 66 66 66 223 222 222
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 206 206 206 198 198 196 207 165 68
-229 174 11 229 174 11 219 158 11 195 134 10
-163 110 10 118 82 10 104 78 10 118 82 10
-164 114 8 197 139 12 226 170 10 238 182 14
-241 186 13 241 186 13 162 146 94 78 78 78
- 34 34 34 14 14 13 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 188 140 34 226 170 10
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 240 198 14 202 164 20 18 18 18
- 2 2 6 2 2 6 2 2 6 38 38 38
-218 218 218 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 206 206 206 198 198 196 207 165 68
-226 170 10 238 178 14 226 166 13 211 150 11
-204 146 11 197 139 12 195 134 10 197 139 12
-211 150 11 226 170 10 241 186 13 246 190 14
-246 190 14 246 186 14 229 174 11 126 114 90
- 62 62 62 30 30 30 14 14 13 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 174 134 50 226 166 13
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 138 102 14
- 2 2 6 2 2 6 2 2 6 2 2 6
- 78 78 78 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 214 214 214 198 198 196 192 148 44
-220 162 10 238 178 14 234 174 12 226 166 13
-219 158 11 214 154 10 214 154 10 219 158 11
-226 170 10 238 182 14 246 190 14 246 190 14
-246 190 14 246 190 14 241 186 13 206 160 36
-102 102 102 58 58 58 30 30 30 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 86 86 86 150 150 150
-170 170 170 186 186 186 226 210 207 231 220 218
-246 230 190 246 230 190 246 230 190 246 230 190
-238 206 90 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 224 188 14
- 60 40 9 2 2 6 6 6 6 2 2 6
- 22 22 22 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 226 226 226 186 186 186 182 134 38
-219 158 11 238 178 14 238 182 14 238 178 14
-229 174 11 226 170 10 226 170 10 229 174 11
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 240 198 14 246 230 190 246 230 190
-226 210 207 186 186 186 110 110 110 38 38 38
- 26 26 26 122 122 122 138 138 142 138 138 142
-138 138 142 102 98 90 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 154 154 154 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-246 230 190 238 206 90 240 198 14 240 198 14
-240 198 14 240 198 14 246 190 14 246 190 14
-246 190 14 240 198 14 240 198 14 238 202 21
-206 160 36 18 18 18 22 22 22 30 30 30
- 70 70 70 246 246 246 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 118 118 118 170 126 38
-220 162 10 238 178 14 241 186 13 246 190 14
-234 196 18 246 190 14 246 190 14 234 196 18
-246 190 14 246 206 46 238 206 90 246 206 46
-240 198 14 246 230 190 254 254 254 254 254 254
-254 254 254 252 251 251 205 195 190 110 110 110
-134 134 134 242 242 242 250 250 250 254 254 254
-250 250 250 138 138 142 102 98 90 2 2 2
- 2 2 2 2 2 2 3 3 3 18 14 6
-150 150 150 242 242 242 239 159 153 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-239 159 153 246 218 74 246 246 246 246 246 246
-246 246 246 246 246 246 238 206 90 246 190 14
-246 230 190 246 246 246 246 246 246 246 246 246
-246 230 190 138 102 14 182 182 182 242 242 242
-252 251 251 252 251 251 252 251 251 252 251 251
-252 251 251 252 251 251 254 254 254 252 251 251
-252 251 251 252 251 251 246 246 246 252 251 251
-254 254 254 252 251 251 252 251 251 254 254 254
-254 254 254 252 251 251 242 242 242 238 238 238
-238 206 90 238 178 14 241 186 13 246 230 190
-246 246 246 246 246 246 246 246 246 246 230 190
-246 230 190 246 246 246 252 251 251 246 230 190
-246 230 190 246 230 190 249 100 93 249 100 93
-249 100 93 249 100 93 218 194 134 218 194 134
-234 234 234 212 132 53 249 100 93 249 100 93
-249 100 93 239 159 153 138 138 142 102 98 90
- 2 2 2 2 2 2 10 10 10 150 150 150
-242 242 242 249 100 93 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 246 246 246 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 238 238 238 246 230 190
-246 230 190 246 230 190 246 230 190 246 246 246
-231 220 218 218 194 134 218 194 134 226 210 207
-246 246 246 246 246 246 246 246 246 252 251 251
-246 246 246 226 210 207 218 194 134 218 194 134
-239 159 153 218 194 134 226 210 207 246 230 190
-246 246 246 238 206 90 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 246 246 226 210 207 239 159 153 226 210 207
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 218 194 134 246 246 246
-231 220 218 254 21 21 254 3 3 254 3 3
-254 3 3 212 132 53 250 250 250 122 122 122
- 2 2 2 2 2 2 89 90 90 246 246 246
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-226 210 207 226 210 207 254 21 21 254 21 21
-254 21 21 254 21 21 239 159 153 252 251 251
-249 100 93 254 21 21 254 21 21 254 21 21
-249 100 93 246 246 246 249 100 93 254 21 21
-254 21 21 254 21 21 249 100 93 249 100 93
-254 21 21 254 3 3 254 3 3 254 21 21
-212 132 53 246 246 246 252 251 251 226 210 207
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-249 100 93 242 242 242 246 246 246 249 100 93
-254 21 21 254 21 21 254 21 21 249 100 93
-249 100 93 254 3 3 254 3 3 254 56 56
-246 246 246 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 246 230 190 252 251 251
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 218 194 134 246 246 246 58 58 58
- 2 2 2 6 6 6 182 182 182 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 212 132 53 249 100 93 249 100 93
-246 246 246 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 238 238 238 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 246 230 190 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 246 246 246 231 220 218 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 254 56 56
-254 3 3 254 3 3 254 3 3 212 132 53
-246 246 246 254 21 21 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 242 242 242 214 214 214 14 14 13
- 2 2 2 6 6 6 210 210 210 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 239 159 153 238 238 238 246 246 246
-246 246 246 254 56 56 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 246 246 246 249 100 93 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-242 242 242 239 159 153 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-226 210 207 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-249 100 93 254 254 254 158 158 158 2 2 2
- 2 2 2 10 10 10 186 186 186 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 252 251 251
-246 230 190 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 56 56
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 226 210 207
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 231 220 218 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 56 56
-254 56 56 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 249 100 93 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 252 251 251 89 90 90 2 2 2
- 2 2 2 6 6 6 50 50 50 206 206 206
-226 210 207 249 100 93 254 56 56 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 238 238 238
-239 159 153 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 238 238 238 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-238 238 238 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 246 246 246 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-249 100 93 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 254 56 56 254 3 3
-254 3 3 254 3 3 254 21 21 249 100 93
-239 159 153 239 159 153 239 159 153 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 242 242 242 26 26 26 2 2 2
- 6 6 6 50 50 50 206 206 206 226 210 207
-231 220 218 231 220 218 231 220 218 246 230 190
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 231 220 218 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-218 194 134 254 3 3 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 231 220 218
-231 220 218 231 220 218 226 210 207 218 194 134
-226 210 207 231 220 218 254 3 3 254 3 3
-254 3 3 254 3 3 212 132 53 246 246 246
-252 251 251 252 251 251 242 242 242 231 220 218
-254 21 21 254 3 3 254 3 3 254 3 3
-249 100 93 242 242 242 238 238 238 254 56 56
-254 3 3 254 3 3 254 3 3 254 56 56
-246 246 246 194 194 194 6 6 6 2 2 2
- 22 22 22 210 210 210 246 230 190 254 56 56
-254 21 21 254 21 21 254 21 21 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 249 100 93 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 56 56 242 242 242
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 56 56
-238 238 238 212 132 53 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 249 100 93
-249 100 93 249 100 93 254 56 56 254 56 56
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 21 21 231 220 218 246 246 246
-206 170 74 182 158 106 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-218 194 134 242 242 242 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-252 251 251 131 126 116 6 6 6 2 2 2
- 89 90 90 246 246 246 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 226 210 207 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 56 56 226 210 207 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-238 238 238 226 210 207 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 239 159 153
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 56 56 246 246 246 231 220 218
-138 102 14 198 198 196 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 21 21
-246 230 190 252 251 251 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-242 242 242 62 62 62 6 6 6 2 2 2
- 58 58 58 122 122 122 218 194 134 212 132 53
-249 100 93 249 100 93 254 56 56 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-212 132 53 246 230 190 214 214 214 146 146 146
-242 242 242 239 159 153 249 100 93 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-239 159 153 246 230 190 246 246 246 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 218 194 134 249 100 93 254 56 56
-254 56 56 249 100 93 226 210 207 230 230 228
- 89 90 90 231 220 218 226 210 207 249 100 93
-249 100 93 254 56 56 254 56 56 254 56 56
-249 100 93 249 100 93 239 159 153 238 238 238
-218 194 134 239 159 153 212 132 53 249 100 93
-249 100 93 239 159 153 231 220 218 154 142 90
-102 102 102 146 146 146 170 170 170 239 159 153
-249 100 93 249 100 93 249 100 93 239 159 153
-218 218 218 130 130 130 239 159 153 249 100 93
-249 100 93 249 100 93 212 132 53 246 230 190
-118 118 118 18 14 6 6 6 6 2 2 2
- 2 2 2 58 58 58 118 118 118 242 242 242
-254 254 254 250 250 250 246 246 246 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 214 214 214 50 50 50 18 18 18
-138 138 142 246 246 246 252 251 251 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 231 220 218 252 251 251 239 159 153
-254 3 3 254 3 3 254 3 3 254 21 21
-231 220 218 238 238 238 252 251 251 242 242 242
-252 251 251 252 251 251 230 230 228 74 74 74
- 18 18 18 62 62 62 226 226 226 254 254 254
-252 251 251 246 246 246 246 246 246 252 251 251
-252 251 251 252 251 251 250 250 250 150 150 150
-162 146 94 205 195 190 252 251 251 252 251 251
-252 251 251 226 210 207 142 134 106 86 86 86
- 58 58 58 34 34 34 122 122 122 163 163 163
-252 251 251 254 254 254 250 250 250 223 222 222
-102 98 90 78 78 78 130 130 130 254 254 254
-254 254 254 254 254 254 246 246 246 118 118 118
- 18 14 6 3 3 3 2 2 2 2 2 2
- 2 2 2 2 2 2 58 58 58 122 122 122
-150 150 150 170 170 170 182 182 182 190 190 187
-201 202 203 201 202 203 190 190 187 170 170 170
-118 118 118 30 30 30 6 6 6 6 6 6
- 10 10 10 86 86 86 150 150 150 182 182 182
-201 202 203 201 202 203 190 190 187 174 174 174
-134 134 134 146 146 146 190 190 187 239 159 153
-249 100 93 249 100 93 249 100 93 249 100 93
-234 234 234 138 138 142 166 166 166 198 198 196
-190 190 187 138 138 142 42 42 43 6 6 6
- 3 3 3 6 6 6 50 50 50 138 138 142
-174 174 174 198 198 196 198 198 196 182 182 182
-163 163 163 138 138 142 102 98 90 70 70 70
- 94 86 75 158 158 158 178 166 146 170 170 170
-174 174 174 138 138 142 74 74 74 50 50 50
- 26 26 26 14 14 13 10 10 10 118 118 118
-130 130 130 130 130 130 130 130 130 102 98 90
- 6 6 6 3 3 3 78 78 78 130 130 130
-130 130 130 130 130 130 118 118 118 18 14 6
- 3 3 3 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 6 6 6
- 10 10 10 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 6 6 6
- 14 14 13 14 14 13 22 22 22 22 22 22
- 34 34 34 42 42 43 122 122 122 174 174 174
-254 254 254 254 254 254 254 254 254 238 238 238
-138 138 142 6 6 6 6 6 6 10 10 10
- 6 6 6 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 2 2 2
- 6 6 6 10 10 10 10 10 10 6 6 6
- 2 2 2 6 6 6 14 14 13 30 30 30
- 42 42 43 54 54 54 62 62 62 62 62 62
- 54 54 54 42 42 43 30 30 30 18 18 18
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 2 2 2 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 10 10 10 10 10 10 14 14 13 106 106 105
-163 163 163 170 170 170 166 166 166 138 138 142
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 22 22 22 22 22 22 22 22 22
- 18 18 18 14 14 13 10 10 10 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
diff --git a/drivers/video/logo/logo_superh_vga16.ppm b/drivers/video/logo/logo_superh_vga16.ppm
deleted file mode 100644
index a8ffcd72951b53..00000000000000
--- a/drivers/video/logo/logo_superh_vga16.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 16-color SuperH Linux logo
-80 80
-255
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 170 170 170 0 0 0 85 85 85
-170 170 170 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 170 170 170
- 85 85 85 85 85 85 85 85 85 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 170 170 170 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 255 170 170 170
-255 255 85 170 170 170 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 170 170 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 170 170 255 255 85
-170 85 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 85 85 85
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 85 0 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-255 255 85 255 255 255 255 255 255 255 255 255
-255 255 85 255 255 255 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 170 0 0 255 85 85
-170 0 0 255 85 85 170 170 170 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 170 170 170
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 85 85 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 85 85 85
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 170 170
-170 170 170 255 85 85 255 85 85 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 170 0 0
-170 0 0 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 255
-170 170 170 255 85 85 255 85 85 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 255 255 255
-255 85 85 170 170 170 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 85 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 85 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 255 255 255 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
- 85 85 85 170 170 170 255 255 255 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
-170 170 170 255 85 85 170 170 170 255 85 85
-255 85 85 170 170 170 255 255 85 170 170 170
- 0 0 0 85 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 255 85 85 255 85 85
-255 255 255 255 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 85 0 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 85 85 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 85 85 85 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 255 255 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 170 85 0 0 0 0
- 0 0 0 85 85 85 85 85 85 170 170 170
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 93539aac0e5b2e..acfa591b604611 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on ARM || ((M68K || SUPERH || XTENSA) && !MMU)
+ depends on ARM || ((M68K || XTENSA) && !MMU)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index de2003974ff0d0..8bf3547f9aa2e2 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -19,7 +19,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 6c6859bfc454cf..c977e87caf67a0 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -64,7 +64,6 @@ enum cpuhp_state {
CPUHP_PERF_X86_PREPARE,
CPUHP_PERF_X86_AMD_UNCORE_PREP,
CPUHP_PERF_POWER,
- CPUHP_PERF_SUPERH,
CPUHP_X86_HPET_DEAD,
CPUHP_X86_APB_DEAD,
CPUHP_X86_MCE_DEAD,
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index c255273b02810e..f0fe4cf51b7e56 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -4,11 +4,7 @@
#include <linux/ioport.h>
-#ifdef CONFIG_SUPERH
-#define INTC_NR_IRQS 512
-#else
#define INTC_NR_IRQS 1024
-#endif
/*
* Convert back and forth between INTEVT and IRQ values.
diff --git a/init/Kconfig b/init/Kconfig
index 0958846b005e15..a5566d69cc9c94 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1535,7 +1535,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE
help
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 137d4abe3eda11..e1ce74fb991b25 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2362,8 +2362,7 @@ static struct ctl_table vm_table[] = {
.proc_handler = numa_zonelist_order_handler,
},
#endif
-#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
- (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
+#if defined(CONFIG_X86_32) && !defined(CONFIG_UML)
{
.procname = "vdso_enabled",
#ifdef CONFIG_X86_32
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 881c3f84e88a32..c51d1f181913f3 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -514,7 +514,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
diff --git a/lib/math/div64.c b/lib/math/div64.c
index 55a81782e2717f..7c51cd1fc9d527 100644
--- a/lib/math/div64.c
+++ b/lib/math/div64.c
@@ -14,8 +14,8 @@
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S
- * or by defining a preprocessor macro in arch/include/asm/div64.h.
+ * assembly versions such as arch/ppc/lib/div64.S or by defining a preprocessor
+ * macro in arch/include/asm/div64.h.
*/
#include <linux/bitops.h>
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index 5ff04d8fe97163..b762c629b59545 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -26,8 +26,7 @@
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
- !defined(CONFIG_PPC32) && \
- !defined(CONFIG_SUPERH))
+ !defined(CONFIG_PPC32))
# define TEST_U64
#endif
diff --git a/scripts/coccinelle/misc/cond_no_effect.cocci b/scripts/coccinelle/misc/cond_no_effect.cocci
index 91d16a81d1da94..05564c2b86b0f3 100644
--- a/scripts/coccinelle/misc/cond_no_effect.cocci
+++ b/scripts/coccinelle/misc/cond_no_effect.cocci
@@ -14,18 +14,7 @@
// In the Linux kernel it does not seem to actually report
// false positives except for those that were documented as
// being intentional.
-// the two known cases are:
-// arch/sh/kernel/traps_64.c:read_opcode()
-// } else if ((pc & 1) == 0) {
-// /* SHcompact */
-// /* TODO : provide handling for this. We don't really support
-// user-mode SHcompact yet, and for a kernel fault, this would
-// have to come from a module built for SHcompact. */
-// return -EFAULT;
-// } else {
-// /* misaligned */
-// return -EFAULT;
-// }
+// the one known case is:
// fs/kernfs/file.c:kernfs_fop_open()
// * Both paths of the branch look the same. They're supposed to
// * look that way and give @of->mutex different static lockdep keys.
diff --git a/scripts/head-object-list.txt b/scripts/head-object-list.txt
index b074134cfac210..4b844a1e3be88e 100644
--- a/scripts/head-object-list.txt
+++ b/scripts/head-object-list.txt
@@ -39,7 +39,6 @@ arch/powerpc/kernel/fpu.o
arch/powerpc/kernel/vector.o
arch/powerpc/kernel/prom_init.o
arch/s390/kernel/head64.o
-arch/sh/kernel/head_32.o
arch/sparc/kernel/head_32.o
arch/sparc/kernel/head_64.o
arch/x86/kernel/head_32.o
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 7bddfd5e38d6cf..793a0326f32b46 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
menu "SoC Audio support for Renesas SoCs"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
config SND_SOC_PCM_SH7760
tristate "SoC Audio support for Renesas SH7760"
@@ -23,7 +23,7 @@ config SND_SOC_SH4_SSI
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
- depends on SUPERH || COMMON_CLK
+ depends on COMMON_CLK
select SND_SIMPLE_CARD
help
This option enables FSI sound support
diff --git a/tools/include/asm/barrier.h b/tools/include/asm/barrier.h
index 8d378c57cb0114..ca1979459a127f 100644
--- a/tools/include/asm/barrier.h
+++ b/tools/include/asm/barrier.h
@@ -10,8 +10,6 @@
#include "../../arch/powerpc/include/asm/barrier.h"
#elif defined(__s390__)
#include "../../arch/s390/include/asm/barrier.h"
-#elif defined(__sh__)
-#include "../../arch/sh/include/asm/barrier.h"
#elif defined(__sparc__)
#include "../../arch/sparc/include/asm/barrier.h"
#elif defined(__tile__)
diff --git a/tools/perf/util/dwarf-regs.c b/tools/perf/util/dwarf-regs.c
index 3fa4486742cdfe..54fdbfb22ec274 100644
--- a/tools/perf/util/dwarf-regs.c
+++ b/tools/perf/util/dwarf-regs.c
@@ -19,7 +19,6 @@
#include "../arch/x86/include/dwarf-regs-table.h"
#include "../arch/arm/include/dwarf-regs-table.h"
#include "../arch/arm64/include/dwarf-regs-table.h"
-#include "../arch/sh/include/dwarf-regs-table.h"
#include "../arch/powerpc/include/dwarf-regs-table.h"
#include "../arch/s390/include/dwarf-regs-table.h"
#include "../arch/sparc/include/dwarf-regs-table.h"
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 03/22] remove arch/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
The Linux SH port has been mostly abandoned for years, with the last
minor maintainer updated being in November 2021. Drop it as it drags
maintainance of the rest of the kernel down.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
Documentation/arch.rst | 1 -
Documentation/sh/booting.rst | 12 -
Documentation/sh/features.rst | 3 -
Documentation/sh/index.rst | 56 -
Documentation/sh/new-machine.rst | 277 ---
Documentation/sh/register-banks.rst | 40 -
MAINTAINERS | 10 -
arch/sh/Kbuild | 7 -
arch/sh/Kconfig | 793 --------
arch/sh/Kconfig.cpu | 100 -
arch/sh/Kconfig.debug | 78 -
arch/sh/Makefile | 215 ---
arch/sh/boards/Kconfig | 400 ----
arch/sh/boards/Makefile | 20 -
arch/sh/boards/board-apsh4a3a.c | 182 --
arch/sh/boards/board-apsh4ad0a.c | 132 --
arch/sh/boards/board-edosk7705.c | 79 -
arch/sh/boards/board-edosk7760.c | 178 --
arch/sh/boards/board-espt.c | 105 --
arch/sh/boards/board-magicpanelr2.c | 390 ----
arch/sh/boards/board-polaris.c | 156 --
arch/sh/boards/board-secureedge5410.c | 75 -
arch/sh/boards/board-sh2007.c | 146 --
arch/sh/boards/board-sh7757lcr.c | 604 -------
arch/sh/boards/board-sh7785lcr.c | 384 ----
arch/sh/boards/board-shmin.c | 35 -
arch/sh/boards/board-titan.c | 21 -
arch/sh/boards/board-urquell.c | 218 ---
arch/sh/boards/mach-ap325rxa/Makefile | 3 -
arch/sh/boards/mach-ap325rxa/sdram.S | 66 -
arch/sh/boards/mach-ap325rxa/setup.c | 573 ------
arch/sh/boards/mach-dreamcast/Makefile | 7 -
arch/sh/boards/mach-dreamcast/irq.c | 155 --
arch/sh/boards/mach-dreamcast/rtc.c | 96 -
arch/sh/boards/mach-dreamcast/setup.c | 39 -
arch/sh/boards/mach-ecovec24/Makefile | 10 -
arch/sh/boards/mach-ecovec24/sdram.S | 108 --
arch/sh/boards/mach-ecovec24/setup.c | 1521 ----------------
arch/sh/boards/mach-highlander/Kconfig | 26 -
arch/sh/boards/mach-highlander/Makefile | 12 -
arch/sh/boards/mach-highlander/irq-r7780mp.c | 71 -
arch/sh/boards/mach-highlander/irq-r7780rp.c | 64 -
arch/sh/boards/mach-highlander/irq-r7785rp.c | 83 -
.../boards/mach-highlander/pinmux-r7785rp.c | 17 -
arch/sh/boards/mach-highlander/psw.c | 119 --
arch/sh/boards/mach-highlander/setup.c | 416 -----
arch/sh/boards/mach-hp6xx/Makefile | 8 -
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 109 --
arch/sh/boards/mach-hp6xx/pm.c | 156 --
arch/sh/boards/mach-hp6xx/pm_wakeup.S | 39 -
arch/sh/boards/mach-hp6xx/setup.c | 172 --
arch/sh/boards/mach-kfr2r09/Makefile | 5 -
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 275 ---
arch/sh/boards/mach-kfr2r09/sdram.S | 77 -
arch/sh/boards/mach-kfr2r09/setup.c | 649 -------
arch/sh/boards/mach-landisk/Makefile | 6 -
arch/sh/boards/mach-landisk/gio.c | 164 --
arch/sh/boards/mach-landisk/irq.c | 63 -
arch/sh/boards/mach-landisk/psw.c | 140 --
arch/sh/boards/mach-landisk/setup.c | 102 --
arch/sh/boards/mach-lboxre2/Makefile | 6 -
arch/sh/boards/mach-lboxre2/irq.c | 27 -
arch/sh/boards/mach-lboxre2/setup.c | 79 -
arch/sh/boards/mach-microdev/Makefile | 6 -
arch/sh/boards/mach-microdev/fdc37c93xapm.c | 157 --
arch/sh/boards/mach-microdev/io.c | 123 --
arch/sh/boards/mach-microdev/irq.c | 150 --
arch/sh/boards/mach-microdev/setup.c | 197 --
arch/sh/boards/mach-migor/Kconfig | 16 -
arch/sh/boards/mach-migor/Makefile | 3 -
arch/sh/boards/mach-migor/lcd_qvga.c | 163 --
arch/sh/boards/mach-migor/sdram.S | 66 -
arch/sh/boards/mach-migor/setup.c | 649 -------
arch/sh/boards/mach-r2d/Kconfig | 24 -
arch/sh/boards/mach-r2d/Makefile | 6 -
arch/sh/boards/mach-r2d/irq.c | 156 --
arch/sh/boards/mach-r2d/setup.c | 305 ----
arch/sh/boards/mach-rsk/Kconfig | 29 -
arch/sh/boards/mach-rsk/Makefile | 5 -
arch/sh/boards/mach-rsk/devices-rsk7203.c | 137 --
arch/sh/boards/mach-rsk/devices-rsk7264.c | 55 -
arch/sh/boards/mach-rsk/devices-rsk7269.c | 57 -
arch/sh/boards/mach-rsk/setup.c | 84 -
arch/sh/boards/mach-sdk7780/Kconfig | 17 -
arch/sh/boards/mach-sdk7780/Makefile | 6 -
arch/sh/boards/mach-sdk7780/irq.c | 43 -
arch/sh/boards/mach-sdk7780/setup.c | 96 -
arch/sh/boards/mach-sdk7786/Makefile | 5 -
arch/sh/boards/mach-sdk7786/fpga.c | 69 -
arch/sh/boards/mach-sdk7786/gpio.c | 46 -
arch/sh/boards/mach-sdk7786/irq.c | 45 -
arch/sh/boards/mach-sdk7786/nmi.c | 80 -
arch/sh/boards/mach-sdk7786/setup.c | 266 ---
arch/sh/boards/mach-sdk7786/sram.c | 69 -
arch/sh/boards/mach-se/7206/Makefile | 6 -
arch/sh/boards/mach-se/7206/irq.c | 151 --
arch/sh/boards/mach-se/7206/setup.c | 96 -
arch/sh/boards/mach-se/7343/Makefile | 6 -
arch/sh/boards/mach-se/7343/irq.c | 123 --
arch/sh/boards/mach-se/7343/setup.c | 182 --
arch/sh/boards/mach-se/770x/Makefile | 6 -
arch/sh/boards/mach-se/770x/irq.c | 109 --
arch/sh/boards/mach-se/770x/setup.c | 205 ---
arch/sh/boards/mach-se/7721/Makefile | 2 -
arch/sh/boards/mach-se/7721/irq.c | 42 -
arch/sh/boards/mach-se/7721/setup.c | 92 -
arch/sh/boards/mach-se/7722/Makefile | 11 -
arch/sh/boards/mach-se/7722/irq.c | 116 --
arch/sh/boards/mach-se/7722/setup.c | 190 --
arch/sh/boards/mach-se/7724/Makefile | 11 -
arch/sh/boards/mach-se/7724/irq.c | 143 --
arch/sh/boards/mach-se/7724/sdram.S | 128 --
arch/sh/boards/mach-se/7724/setup.c | 986 ----------
arch/sh/boards/mach-se/7751/Makefile | 6 -
arch/sh/boards/mach-se/7751/irq.c | 51 -
arch/sh/boards/mach-se/7751/setup.c | 60 -
arch/sh/boards/mach-se/7780/Makefile | 11 -
arch/sh/boards/mach-se/7780/irq.c | 65 -
arch/sh/boards/mach-se/7780/setup.c | 111 --
arch/sh/boards/mach-se/Makefile | 11 -
arch/sh/boards/mach-se/board-se7619.c | 27 -
arch/sh/boards/mach-sh03/Makefile | 7 -
arch/sh/boards/mach-sh03/rtc.c | 143 --
arch/sh/boards/mach-sh03/setup.c | 97 -
arch/sh/boards/mach-sh7763rdp/Makefile | 2 -
arch/sh/boards/mach-sh7763rdp/irq.c | 42 -
arch/sh/boards/mach-sh7763rdp/setup.c | 213 ---
arch/sh/boards/mach-x3proto/Makefile | 4 -
arch/sh/boards/mach-x3proto/gpio.c | 136 --
arch/sh/boards/mach-x3proto/ilsel.c | 156 --
arch/sh/boards/mach-x3proto/setup.c | 270 ---
arch/sh/boards/of-generic.c | 172 --
arch/sh/boot/.gitignore | 5 -
arch/sh/boot/Makefile | 115 --
arch/sh/boot/compressed/.gitignore | 2 -
arch/sh/boot/compressed/Makefile | 66 -
arch/sh/boot/compressed/ashiftrt.S | 2 -
arch/sh/boot/compressed/ashldi3.c | 2 -
arch/sh/boot/compressed/ashlsi3.S | 2 -
arch/sh/boot/compressed/ashrsi3.S | 2 -
arch/sh/boot/compressed/cache.c | 13 -
arch/sh/boot/compressed/head_32.S | 126 --
arch/sh/boot/compressed/head_64.S | 159 --
arch/sh/boot/compressed/lshrsi3.S | 2 -
arch/sh/boot/compressed/misc.c | 146 --
arch/sh/boot/compressed/vmlinux.scr | 10 -
arch/sh/boot/dts/Makefile | 2 -
arch/sh/boot/dts/j2_mimas_v2.dts | 99 -
arch/sh/boot/romimage/Makefile | 30 -
arch/sh/boot/romimage/head.S | 85 -
arch/sh/boot/romimage/mmcif-sh7724.c | 78 -
arch/sh/boot/romimage/vmlinux.scr | 8 -
arch/sh/cchips/Kconfig | 46 -
arch/sh/cchips/hd6446x/Makefile | 4 -
arch/sh/cchips/hd6446x/hd64461.c | 112 --
arch/sh/configs/ap325rxa_defconfig | 103 --
arch/sh/configs/apsh4a3a_defconfig | 91 -
arch/sh/configs/apsh4ad0a_defconfig | 122 --
arch/sh/configs/dreamcast_defconfig | 72 -
arch/sh/configs/ecovec24-romimage_defconfig | 58 -
arch/sh/configs/ecovec24_defconfig | 132 --
arch/sh/configs/edosk7705_defconfig | 35 -
arch/sh/configs/edosk7760_defconfig | 114 --
arch/sh/configs/espt_defconfig | 114 --
arch/sh/configs/hp6xx_defconfig | 60 -
arch/sh/configs/j2_defconfig | 42 -
arch/sh/configs/kfr2r09-romimage_defconfig | 53 -
arch/sh/configs/kfr2r09_defconfig | 84 -
arch/sh/configs/landisk_defconfig | 115 --
arch/sh/configs/lboxre2_defconfig | 62 -
arch/sh/configs/magicpanelr2_defconfig | 90 -
arch/sh/configs/microdev_defconfig | 43 -
arch/sh/configs/migor_defconfig | 94 -
arch/sh/configs/polaris_defconfig | 83 -
arch/sh/configs/r7780mp_defconfig | 109 --
arch/sh/configs/r7785rp_defconfig | 107 --
arch/sh/configs/rsk7201_defconfig | 63 -
arch/sh/configs/rsk7203_defconfig | 121 --
arch/sh/configs/rsk7264_defconfig | 71 -
arch/sh/configs/rsk7269_defconfig | 56 -
arch/sh/configs/rts7751r2d1_defconfig | 91 -
arch/sh/configs/rts7751r2dplus_defconfig | 96 -
arch/sh/configs/sdk7780_defconfig | 139 --
arch/sh/configs/sdk7786_defconfig | 217 ---
arch/sh/configs/se7206_defconfig | 108 --
arch/sh/configs/se7343_defconfig | 96 -
arch/sh/configs/se7619_defconfig | 43 -
arch/sh/configs/se7705_defconfig | 54 -
arch/sh/configs/se7712_defconfig | 101 --
arch/sh/configs/se7721_defconfig | 127 --
arch/sh/configs/se7722_defconfig | 56 -
arch/sh/configs/se7724_defconfig | 132 --
arch/sh/configs/se7750_defconfig | 55 -
arch/sh/configs/se7751_defconfig | 46 -
arch/sh/configs/se7780_defconfig | 106 --
arch/sh/configs/secureedge5410_defconfig | 53 -
arch/sh/configs/sh03_defconfig | 126 --
arch/sh/configs/sh2007_defconfig | 199 --
arch/sh/configs/sh7710voipgw_defconfig | 55 -
arch/sh/configs/sh7724_generic_defconfig | 41 -
arch/sh/configs/sh7757lcr_defconfig | 85 -
arch/sh/configs/sh7763rdp_defconfig | 116 --
arch/sh/configs/sh7770_generic_defconfig | 43 -
arch/sh/configs/sh7785lcr_32bit_defconfig | 149 --
arch/sh/configs/sh7785lcr_defconfig | 117 --
arch/sh/configs/shmin_defconfig | 52 -
arch/sh/configs/shx3_defconfig | 103 --
arch/sh/configs/titan_defconfig | 272 ---
arch/sh/configs/ul2_defconfig | 84 -
arch/sh/configs/urquell_defconfig | 147 --
arch/sh/drivers/Kconfig | 20 -
arch/sh/drivers/Makefile | 11 -
arch/sh/drivers/dma/Kconfig | 74 -
arch/sh/drivers/dma/Makefile | 9 -
arch/sh/drivers/dma/dma-api.c | 417 -----
arch/sh/drivers/dma/dma-g2.c | 197 --
arch/sh/drivers/dma/dma-pvr2.c | 102 --
arch/sh/drivers/dma/dma-sh.c | 414 -----
arch/sh/drivers/dma/dma-sysfs.c | 164 --
arch/sh/drivers/dma/dmabrg.c | 196 --
arch/sh/drivers/heartbeat.c | 152 --
arch/sh/drivers/pci/Makefile | 27 -
arch/sh/drivers/pci/common.c | 159 --
arch/sh/drivers/pci/fixups-dreamcast.c | 84 -
arch/sh/drivers/pci/fixups-landisk.c | 57 -
arch/sh/drivers/pci/fixups-r7780rp.c | 18 -
arch/sh/drivers/pci/fixups-rts7751r2d.c | 64 -
arch/sh/drivers/pci/fixups-sdk7780.c | 40 -
arch/sh/drivers/pci/fixups-sdk7786.c | 64 -
arch/sh/drivers/pci/fixups-se7751.c | 113 --
arch/sh/drivers/pci/fixups-sh03.c | 33 -
arch/sh/drivers/pci/fixups-snapgear.c | 37 -
arch/sh/drivers/pci/fixups-titan.c | 36 -
arch/sh/drivers/pci/ops-dreamcast.c | 79 -
arch/sh/drivers/pci/ops-sh4.c | 105 --
arch/sh/drivers/pci/ops-sh7786.c | 168 --
arch/sh/drivers/pci/pci-dreamcast.c | 97 -
arch/sh/drivers/pci/pci-sh4.h | 182 --
arch/sh/drivers/pci/pci-sh7751.c | 179 --
arch/sh/drivers/pci/pci-sh7751.h | 126 --
arch/sh/drivers/pci/pci-sh7780.c | 407 -----
arch/sh/drivers/pci/pci-sh7780.h | 43 -
arch/sh/drivers/pci/pci.c | 298 ---
arch/sh/drivers/pci/pcie-sh7786.c | 609 -------
arch/sh/drivers/pci/pcie-sh7786.h | 577 ------
arch/sh/drivers/platform_early.c | 340 ----
arch/sh/drivers/push-switch.c | 136 --
arch/sh/drivers/superhyway/Makefile | 7 -
arch/sh/drivers/superhyway/ops-sh4-202.c | 168 --
arch/sh/include/asm/Kbuild | 5 -
arch/sh/include/asm/adc.h | 12 -
arch/sh/include/asm/addrspace.h | 63 -
arch/sh/include/asm/alignment.h | 22 -
arch/sh/include/asm/asm-offsets.h | 2 -
arch/sh/include/asm/atomic-grb.h | 86 -
arch/sh/include/asm/atomic-irq.h | 72 -
arch/sh/include/asm/atomic-llsc.h | 88 -
arch/sh/include/asm/atomic.h | 38 -
arch/sh/include/asm/barrier.h | 45 -
arch/sh/include/asm/bitops-cas.h | 94 -
arch/sh/include/asm/bitops-grb.h | 173 --
arch/sh/include/asm/bitops-llsc.h | 147 --
arch/sh/include/asm/bitops-op32.h | 143 --
arch/sh/include/asm/bitops.h | 72 -
arch/sh/include/asm/bl_bit.h | 2 -
arch/sh/include/asm/bl_bit_32.h | 34 -
arch/sh/include/asm/bug.h | 121 --
arch/sh/include/asm/bugs.h | 74 -
arch/sh/include/asm/cache.h | 46 -
arch/sh/include/asm/cache_insns.h | 2 -
arch/sh/include/asm/cache_insns_32.h | 22 -
arch/sh/include/asm/cacheflush.h | 106 --
arch/sh/include/asm/checksum.h | 2 -
arch/sh/include/asm/checksum_32.h | 203 ---
arch/sh/include/asm/clock.h | 17 -
arch/sh/include/asm/cmpxchg-cas.h | 25 -
arch/sh/include/asm/cmpxchg-grb.h | 95 -
arch/sh/include/asm/cmpxchg-irq.h | 54 -
arch/sh/include/asm/cmpxchg-llsc.h | 53 -
arch/sh/include/asm/cmpxchg-xchg.h | 50 -
arch/sh/include/asm/cmpxchg.h | 74 -
arch/sh/include/asm/device.h | 17 -
arch/sh/include/asm/dma-register.h | 50 -
arch/sh/include/asm/dma.h | 140 --
arch/sh/include/asm/dmabrg.h | 24 -
arch/sh/include/asm/dwarf.h | 417 -----
arch/sh/include/asm/elf.h | 211 ---
arch/sh/include/asm/entry-macros.S | 123 --
arch/sh/include/asm/extable.h | 7 -
arch/sh/include/asm/fb.h | 20 -
arch/sh/include/asm/fixmap.h | 86 -
arch/sh/include/asm/flat.h | 33 -
arch/sh/include/asm/fpu.h | 69 -
arch/sh/include/asm/freq.h | 12 -
arch/sh/include/asm/ftrace.h | 48 -
arch/sh/include/asm/futex-cas.h | 35 -
arch/sh/include/asm/futex-irq.h | 25 -
arch/sh/include/asm/futex-llsc.h | 42 -
arch/sh/include/asm/futex.h | 72 -
arch/sh/include/asm/gpio.h | 50 -
arch/sh/include/asm/hardirq.h | 11 -
arch/sh/include/asm/hd64461.h | 252 ---
arch/sh/include/asm/heartbeat.h | 19 -
arch/sh/include/asm/hugetlb.h | 38 -
arch/sh/include/asm/hw_breakpoint.h | 70 -
arch/sh/include/asm/hw_irq.h | 36 -
arch/sh/include/asm/i2c-sh7760.h | 21 -
arch/sh/include/asm/io.h | 294 ---
arch/sh/include/asm/io_generic.h | 19 -
arch/sh/include/asm/io_noioport.h | 86 -
arch/sh/include/asm/io_trapped.h | 59 -
arch/sh/include/asm/irq.h | 58 -
arch/sh/include/asm/irqflags.h | 10 -
arch/sh/include/asm/kdebug.h | 19 -
arch/sh/include/asm/kexec.h | 72 -
arch/sh/include/asm/kgdb.h | 38 -
arch/sh/include/asm/kprobes.h | 57 -
arch/sh/include/asm/linkage.h | 8 -
arch/sh/include/asm/machvec.h | 41 -
arch/sh/include/asm/mmiowb.h | 12 -
arch/sh/include/asm/mmu.h | 107 --
arch/sh/include/asm/mmu_context.h | 178 --
arch/sh/include/asm/mmu_context_32.h | 51 -
arch/sh/include/asm/mmzone.h | 45 -
arch/sh/include/asm/module.h | 14 -
arch/sh/include/asm/page.h | 186 --
arch/sh/include/asm/pci.h | 91 -
arch/sh/include/asm/perf_event.h | 30 -
arch/sh/include/asm/pgalloc.h | 40 -
arch/sh/include/asm/pgtable-2level.h | 24 -
arch/sh/include/asm/pgtable-3level.h | 59 -
arch/sh/include/asm/pgtable.h | 150 --
arch/sh/include/asm/pgtable_32.h | 462 -----
arch/sh/include/asm/platform_early.h | 61 -
arch/sh/include/asm/posix_types.h | 2 -
arch/sh/include/asm/processor.h | 173 --
arch/sh/include/asm/processor_32.h | 202 ---
arch/sh/include/asm/ptrace.h | 139 --
arch/sh/include/asm/ptrace_32.h | 14 -
arch/sh/include/asm/push-switch.h | 32 -
arch/sh/include/asm/reboot.h | 22 -
arch/sh/include/asm/romimage-macros.h | 74 -
arch/sh/include/asm/rtc.h | 15 -
arch/sh/include/asm/seccomp.h | 21 -
arch/sh/include/asm/sections.h | 12 -
arch/sh/include/asm/setup.h | 25 -
arch/sh/include/asm/sfp-machine.h | 80 -
arch/sh/include/asm/sh7760fb.h | 198 --
arch/sh/include/asm/sh_bios.h | 28 -
arch/sh/include/asm/shmparam.h | 19 -
arch/sh/include/asm/siu.h | 20 -
arch/sh/include/asm/smc37c93x.h | 191 --
arch/sh/include/asm/smp-ops.h | 52 -
arch/sh/include/asm/smp.h | 83 -
arch/sh/include/asm/sparsemem.h | 12 -
arch/sh/include/asm/spi.h | 14 -
arch/sh/include/asm/spinlock-cas.h | 89 -
arch/sh/include/asm/spinlock-llsc.h | 198 --
arch/sh/include/asm/spinlock.h | 19 -
arch/sh/include/asm/spinlock_types.h | 22 -
arch/sh/include/asm/sram.h | 39 -
arch/sh/include/asm/stackprotector.h | 21 -
arch/sh/include/asm/stacktrace.h | 21 -
arch/sh/include/asm/string.h | 2 -
arch/sh/include/asm/string_32.h | 102 --
arch/sh/include/asm/suspend.h | 97 -
arch/sh/include/asm/switch_to.h | 7 -
arch/sh/include/asm/switch_to_32.h | 131 --
arch/sh/include/asm/syscall.h | 9 -
arch/sh/include/asm/syscall_32.h | 69 -
arch/sh/include/asm/syscalls.h | 14 -
arch/sh/include/asm/syscalls_32.h | 27 -
arch/sh/include/asm/thread_info.h | 171 --
arch/sh/include/asm/timex.h | 24 -
arch/sh/include/asm/tlb.h | 29 -
arch/sh/include/asm/tlbflush.h | 52 -
arch/sh/include/asm/topology.h | 28 -
arch/sh/include/asm/traps.h | 18 -
arch/sh/include/asm/traps_32.h | 61 -
arch/sh/include/asm/types.h | 16 -
arch/sh/include/asm/uaccess.h | 133 --
arch/sh/include/asm/uaccess_32.h | 227 ---
arch/sh/include/asm/uncached.h | 59 -
arch/sh/include/asm/unistd.h | 31 -
arch/sh/include/asm/unwinder.h | 32 -
arch/sh/include/asm/user.h | 55 -
arch/sh/include/asm/vermagic.h | 30 -
arch/sh/include/asm/vga.h | 7 -
arch/sh/include/asm/vmalloc.h | 4 -
arch/sh/include/asm/vmlinux.lds.h | 18 -
arch/sh/include/asm/watchdog.h | 159 --
arch/sh/include/asm/word-at-a-time.h | 54 -
arch/sh/include/cpu-common/cpu/addrspace.h | 16 -
arch/sh/include/cpu-common/cpu/mmu_context.h | 13 -
arch/sh/include/cpu-common/cpu/pfc.h | 18 -
arch/sh/include/cpu-common/cpu/rtc.h | 9 -
arch/sh/include/cpu-common/cpu/sigcontext.h | 18 -
arch/sh/include/cpu-common/cpu/timer.h | 7 -
arch/sh/include/cpu-sh2/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2/cpu/freq.h | 15 -
arch/sh/include/cpu-sh2/cpu/watchdog.h | 66 -
arch/sh/include/cpu-sh2a/cpu/addrspace.h | 11 -
arch/sh/include/cpu-sh2a/cpu/cache.h | 40 -
arch/sh/include/cpu-sh2a/cpu/freq.h | 13 -
arch/sh/include/cpu-sh2a/cpu/rtc.h | 9 -
arch/sh/include/cpu-sh2a/cpu/sh7203.h | 144 --
arch/sh/include/cpu-sh2a/cpu/sh7264.h | 169 --
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 213 ---
arch/sh/include/cpu-sh2a/cpu/watchdog.h | 2 -
arch/sh/include/cpu-sh3/cpu/adc.h | 29 -
arch/sh/include/cpu-sh3/cpu/cache.h | 40 -
arch/sh/include/cpu-sh3/cpu/dac.h | 42 -
arch/sh/include/cpu-sh3/cpu/dma-register.h | 38 -
arch/sh/include/cpu-sh3/cpu/dma.h | 19 -
arch/sh/include/cpu-sh3/cpu/freq.h | 24 -
arch/sh/include/cpu-sh3/cpu/gpio.h | 78 -
arch/sh/include/cpu-sh3/cpu/mmu_context.h | 42 -
arch/sh/include/cpu-sh3/cpu/serial.h | 11 -
arch/sh/include/cpu-sh3/cpu/sh7720.h | 175 --
arch/sh/include/cpu-sh3/cpu/watchdog.h | 22 -
arch/sh/include/cpu-sh4/cpu/addrspace.h | 41 -
arch/sh/include/cpu-sh4/cpu/cache.h | 41 -
arch/sh/include/cpu-sh4/cpu/dma-register.h | 98 -
arch/sh/include/cpu-sh4/cpu/dma.h | 18 -
arch/sh/include/cpu-sh4/cpu/fpu.h | 30 -
arch/sh/include/cpu-sh4/cpu/freq.h | 74 -
arch/sh/include/cpu-sh4/cpu/mmu_context.h | 79 -
arch/sh/include/cpu-sh4/cpu/rtc.h | 14 -
arch/sh/include/cpu-sh4/cpu/sh7722.h | 252 ---
arch/sh/include/cpu-sh4/cpu/sh7723.h | 285 ---
arch/sh/include/cpu-sh4/cpu/sh7724.h | 319 ----
arch/sh/include/cpu-sh4/cpu/sh7734.h | 307 ----
arch/sh/include/cpu-sh4/cpu/sh7757.h | 290 ---
arch/sh/include/cpu-sh4/cpu/sh7785.h | 260 ---
arch/sh/include/cpu-sh4/cpu/sh7786.h | 138 --
arch/sh/include/cpu-sh4/cpu/shx3.h | 65 -
arch/sh/include/cpu-sh4/cpu/sigcontext.h | 25 -
arch/sh/include/cpu-sh4/cpu/sq.h | 33 -
arch/sh/include/cpu-sh4/cpu/watchdog.h | 41 -
arch/sh/include/cpu-sh4a/cpu/dma.h | 72 -
arch/sh/include/cpu-sh4a/cpu/serial.h | 8 -
arch/sh/include/mach-common/mach/highlander.h | 208 ---
arch/sh/include/mach-common/mach/hp6xx.h | 59 -
arch/sh/include/mach-common/mach/lboxre2.h | 24 -
.../include/mach-common/mach/magicpanelr2.h | 64 -
.../sh/include/mach-common/mach/mangle-port.h | 46 -
arch/sh/include/mach-common/mach/microdev.h | 69 -
arch/sh/include/mach-common/mach/r2d.h | 71 -
arch/sh/include/mach-common/mach/romimage.h | 12 -
arch/sh/include/mach-common/mach/sdk7780.h | 79 -
.../include/mach-common/mach/secureedge5410.h | 47 -
arch/sh/include/mach-common/mach/sh2007.h | 118 --
arch/sh/include/mach-common/mach/sh7763rdp.h | 50 -
arch/sh/include/mach-common/mach/sh7785lcr.h | 58 -
arch/sh/include/mach-common/mach/shmin.h | 10 -
arch/sh/include/mach-common/mach/titan.h | 20 -
arch/sh/include/mach-common/mach/urquell.h | 69 -
arch/sh/include/mach-dreamcast/mach/dma.h | 29 -
arch/sh/include/mach-dreamcast/mach/maple.h | 38 -
arch/sh/include/mach-dreamcast/mach/pci.h | 24 -
arch/sh/include/mach-dreamcast/mach/sysasic.h | 46 -
.../mach-ecovec24/mach/partner-jet-setup.txt | 82 -
arch/sh/include/mach-ecovec24/mach/romimage.h | 48 -
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 24 -
.../mach-kfr2r09/mach/partner-jet-setup.txt | 144 --
arch/sh/include/mach-kfr2r09/mach/romimage.h | 31 -
arch/sh/include/mach-landisk/mach/gio.h | 38 -
.../mach-landisk/mach/iodata_landisk.h | 46 -
arch/sh/include/mach-migor/mach/migor.h | 16 -
arch/sh/include/mach-sdk7786/mach/fpga.h | 156 --
arch/sh/include/mach-sdk7786/mach/irq.h | 8 -
arch/sh/include/mach-se/mach/mrshpc.h | 53 -
arch/sh/include/mach-se/mach/se.h | 120 --
arch/sh/include/mach-se/mach/se7206.h | 14 -
arch/sh/include/mach-se/mach/se7343.h | 143 --
arch/sh/include/mach-se/mach/se7721.h | 68 -
arch/sh/include/mach-se/mach/se7722.h | 98 -
arch/sh/include/mach-se/mach/se7724.h | 69 -
arch/sh/include/mach-se/mach/se7751.h | 75 -
arch/sh/include/mach-se/mach/se7780.h | 106 --
arch/sh/include/mach-sh03/mach/io.h | 26 -
arch/sh/include/mach-sh03/mach/sh03.h | 19 -
arch/sh/include/mach-x3proto/mach/hardware.h | 13 -
arch/sh/include/mach-x3proto/mach/ilsel.h | 46 -
arch/sh/include/uapi/asm/Kbuild | 4 -
arch/sh/include/uapi/asm/auxvec.h | 39 -
arch/sh/include/uapi/asm/byteorder.h | 11 -
arch/sh/include/uapi/asm/cachectl.h | 20 -
arch/sh/include/uapi/asm/cpu-features.h | 28 -
arch/sh/include/uapi/asm/hw_breakpoint.h | 5 -
arch/sh/include/uapi/asm/ioctls.h | 116 --
arch/sh/include/uapi/asm/posix_types.h | 2 -
arch/sh/include/uapi/asm/posix_types_32.h | 23 -
arch/sh/include/uapi/asm/ptrace.h | 30 -
arch/sh/include/uapi/asm/ptrace_32.h | 78 -
arch/sh/include/uapi/asm/sigcontext.h | 25 -
arch/sh/include/uapi/asm/signal.h | 18 -
arch/sh/include/uapi/asm/sockios.h | 18 -
arch/sh/include/uapi/asm/stat.h | 78 -
arch/sh/include/uapi/asm/swab.h | 50 -
arch/sh/include/uapi/asm/unistd.h | 2 -
arch/sh/kernel/.gitignore | 2 -
arch/sh/kernel/Makefile | 49 -
arch/sh/kernel/asm-offsets.c | 60 -
arch/sh/kernel/cpu/Makefile | 21 -
arch/sh/kernel/cpu/adc.c | 37 -
arch/sh/kernel/cpu/clock-cpg.c | 78 -
arch/sh/kernel/cpu/clock.c | 52 -
arch/sh/kernel/cpu/fpu.c | 92 -
arch/sh/kernel/cpu/init.c | 366 ----
arch/sh/kernel/cpu/irq/Makefile | 6 -
arch/sh/kernel/cpu/irq/imask.c | 85 -
arch/sh/kernel/cpu/irq/ipr.c | 80 -
arch/sh/kernel/cpu/pfc.c | 25 -
arch/sh/kernel/cpu/proc.c | 151 --
arch/sh/kernel/cpu/sh2/Makefile | 12 -
arch/sh/kernel/cpu/sh2/clock-sh7619.c | 74 -
arch/sh/kernel/cpu/sh2/entry.S | 373 ----
arch/sh/kernel/cpu/sh2/ex.S | 44 -
arch/sh/kernel/cpu/sh2/probe.c | 71 -
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 205 ---
arch/sh/kernel/cpu/sh2/smp-j2.c | 136 --
arch/sh/kernel/cpu/sh2a/Makefile | 25 -
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 82 -
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 78 -
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 80 -
arch/sh/kernel/cpu/sh2a/clock-sh7264.c | 157 --
arch/sh/kernel/cpu/sh2a/clock-sh7269.c | 181 --
arch/sh/kernel/cpu/sh2a/entry.S | 247 ---
arch/sh/kernel/cpu/sh2a/ex.S | 70 -
arch/sh/kernel/cpu/sh2a/fpu.c | 572 ------
arch/sh/kernel/cpu/sh2a/opcode_helper.c | 51 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 27 -
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 28 -
arch/sh/kernel/cpu/sh2a/probe.c | 57 -
arch/sh/kernel/cpu/sh2a/setup-mxg.c | 175 --
arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 418 -----
arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 355 ----
arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 291 ---
arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 552 ------
arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 568 ------
arch/sh/kernel/cpu/sh3/Makefile | 34 -
arch/sh/kernel/cpu/sh3/clock-sh3.c | 86 -
arch/sh/kernel/cpu/sh3/clock-sh7705.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7706.c | 81 -
arch/sh/kernel/cpu/sh3/clock-sh7709.c | 82 -
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 75 -
arch/sh/kernel/cpu/sh3/clock-sh7712.c | 68 -
arch/sh/kernel/cpu/sh3/entry.S | 509 ------
arch/sh/kernel/cpu/sh3/ex.S | 56 -
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 27 -
arch/sh/kernel/cpu/sh3/probe.c | 108 --
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 34 -
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 21 -
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 38 -
arch/sh/kernel/cpu/sh3/setup-sh3.c | 69 -
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 190 --
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 246 ---
arch/sh/kernel/cpu/sh3/setup-sh7710.c | 189 --
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 286 ---
arch/sh/kernel/cpu/sh3/swsusp.S | 144 --
arch/sh/kernel/cpu/sh4/Makefile | 37 -
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174 --
arch/sh/kernel/cpu/sh4/clock-sh4.c | 77 -
arch/sh/kernel/cpu/sh4/fpu.c | 425 -----
arch/sh/kernel/cpu/sh4/perf_event.c | 265 ---
arch/sh/kernel/cpu/sh4/probe.c | 260 ---
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139 --
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 359 ----
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 297 ---
arch/sh/kernel/cpu/sh4/softfloat.c | 930 ----------
arch/sh/kernel/cpu/sh4/sq.c | 414 -----
arch/sh/kernel/cpu/sh4a/Makefile | 53 -
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 277 ---
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 270 ---
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 253 ---
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 301 ----
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 367 ----
arch/sh/kernel/cpu/sh4a/clock-sh7734.c | 256 ---
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 152 --
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 116 --
arch/sh/kernel/cpu/sh4a/clock-sh7770.c | 70 -
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 122 --
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 174 --
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 189 --
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 148 --
arch/sh/kernel/cpu/sh4a/intc-shx3.c | 31 -
arch/sh/kernel/cpu/sh4a/perf_event.c | 299 ---
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 21 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 27 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 32 -
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 26 -
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 24 -
arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 444 -----
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 388 ----
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 666 -------
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 644 -------
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 1288 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 621 -------
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 1242 -------------
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 455 -----
arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 571 ------
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 505 ------
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 608 -------
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 841 ---------
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 396 ----
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 146 --
arch/sh/kernel/cpu/sh4a/ubc.c | 130 --
arch/sh/kernel/cpu/shmobile/Makefile | 8 -
arch/sh/kernel/cpu/shmobile/cpuidle.c | 95 -
arch/sh/kernel/cpu/shmobile/pm.c | 153 --
arch/sh/kernel/cpu/shmobile/sleep.S | 402 -----
arch/sh/kernel/crash_dump.c | 27 -
arch/sh/kernel/debugtraps.S | 38 -
arch/sh/kernel/disassemble.c | 572 ------
arch/sh/kernel/dma-coherent.c | 33 -
arch/sh/kernel/dumpstack.c | 156 --
arch/sh/kernel/dwarf.c | 1206 -------------
arch/sh/kernel/entry-common.S | 400 ----
arch/sh/kernel/ftrace.c | 365 ----
arch/sh/kernel/head_32.S | 365 ----
arch/sh/kernel/hw_breakpoint.c | 408 -----
arch/sh/kernel/idle.c | 57 -
arch/sh/kernel/io.c | 111 --
arch/sh/kernel/io_trapped.c | 291 ---
arch/sh/kernel/iomap.c | 162 --
arch/sh/kernel/ioport.c | 41 -
arch/sh/kernel/irq.c | 249 ---
arch/sh/kernel/irq_32.c | 54 -
arch/sh/kernel/kdebugfs.c | 14 -
arch/sh/kernel/kgdb.c | 378 ----
arch/sh/kernel/kprobes.c | 452 -----
arch/sh/kernel/machine_kexec.c | 204 ---
arch/sh/kernel/machvec.c | 122 --
arch/sh/kernel/module.c | 104 --
arch/sh/kernel/nmi_debug.c | 75 -
arch/sh/kernel/perf_callchain.c | 32 -
arch/sh/kernel/perf_event.c | 363 ----
arch/sh/kernel/process.c | 77 -
arch/sh/kernel/process_32.c | 197 --
arch/sh/kernel/ptrace.c | 34 -
arch/sh/kernel/ptrace_32.c | 487 -----
arch/sh/kernel/reboot.c | 96 -
arch/sh/kernel/relocate_kernel.S | 230 ---
arch/sh/kernel/return_address.c | 56 -
arch/sh/kernel/setup.c | 356 ----
arch/sh/kernel/sh_bios.c | 169 --
arch/sh/kernel/sh_ksyms_32.c | 118 --
arch/sh/kernel/signal_32.c | 507 ------
arch/sh/kernel/smp.c | 471 -----
arch/sh/kernel/stacktrace.c | 79 -
arch/sh/kernel/swsusp.c | 35 -
arch/sh/kernel/sys_sh.c | 96 -
arch/sh/kernel/sys_sh32.c | 61 -
arch/sh/kernel/syscalls/Makefile | 32 -
arch/sh/kernel/syscalls/syscall.tbl | 455 -----
arch/sh/kernel/syscalls_32.S | 17 -
arch/sh/kernel/time.c | 45 -
arch/sh/kernel/topology.c | 74 -
arch/sh/kernel/traps.c | 204 ---
arch/sh/kernel/traps_32.c | 795 --------
arch/sh/kernel/unwinder.c | 165 --
arch/sh/kernel/vmlinux.lds.S | 82 -
arch/sh/kernel/vsyscall/.gitignore | 2 -
arch/sh/kernel/vsyscall/Makefile | 36 -
arch/sh/kernel/vsyscall/vsyscall-note.S | 26 -
arch/sh/kernel/vsyscall/vsyscall-sigreturn.S | 75 -
arch/sh/kernel/vsyscall/vsyscall-syscall.S | 11 -
arch/sh/kernel/vsyscall/vsyscall-trapa.S | 40 -
arch/sh/kernel/vsyscall/vsyscall.c | 93 -
arch/sh/kernel/vsyscall/vsyscall.lds.S | 85 -
arch/sh/lib/Makefile | 32 -
arch/sh/lib/__clear_user.S | 109 --
arch/sh/lib/ashiftrt.S | 128 --
arch/sh/lib/ashldi3.c | 30 -
arch/sh/lib/ashlsi3.S | 189 --
arch/sh/lib/ashrdi3.c | 32 -
arch/sh/lib/ashrsi3.S | 179 --
arch/sh/lib/checksum.S | 365 ----
arch/sh/lib/copy_page.S | 390 ----
arch/sh/lib/delay.c | 54 -
arch/sh/lib/div64-generic.c | 20 -
arch/sh/lib/div64.S | 47 -
arch/sh/lib/io.c | 79 -
arch/sh/lib/libgcc.h | 27 -
arch/sh/lib/lshrdi3.c | 30 -
arch/sh/lib/lshrsi3.S | 188 --
arch/sh/lib/mcount.S | 287 ---
arch/sh/lib/memchr.S | 27 -
arch/sh/lib/memcpy-sh4.S | 800 --------
arch/sh/lib/memcpy.S | 228 ---
arch/sh/lib/memmove.S | 255 ---
arch/sh/lib/memset-sh4.S | 108 --
arch/sh/lib/memset.S | 59 -
arch/sh/lib/movmem.S | 217 ---
arch/sh/lib/strlen.S | 71 -
arch/sh/lib/udiv_qrnnd.S | 60 -
arch/sh/lib/udivsi3.S | 66 -
arch/sh/lib/udivsi3_i4i-Os.S | 128 --
arch/sh/lib/udivsi3_i4i.S | 645 -------
arch/sh/math-emu/Makefile | 2 -
arch/sh/math-emu/math.c | 506 ------
arch/sh/math-emu/sfp-util.h | 73 -
arch/sh/mm/Kconfig | 254 ---
arch/sh/mm/Makefile | 45 -
arch/sh/mm/alignment.c | 189 --
arch/sh/mm/asids-debugfs.c | 59 -
arch/sh/mm/cache-debugfs.c | 109 --
arch/sh/mm/cache-j2.c | 64 -
arch/sh/mm/cache-sh2.c | 90 -
arch/sh/mm/cache-sh2a.c | 188 --
arch/sh/mm/cache-sh3.c | 102 --
arch/sh/mm/cache-sh4.c | 390 ----
arch/sh/mm/cache-sh7705.c | 194 --
arch/sh/mm/cache-shx3.c | 44 -
arch/sh/mm/cache.c | 360 ----
arch/sh/mm/consistent.c | 65 -
arch/sh/mm/extable_32.c | 24 -
arch/sh/mm/fault.c | 504 ------
arch/sh/mm/flush-sh4.c | 111 --
arch/sh/mm/hugetlbpage.c | 82 -
arch/sh/mm/init.c | 424 -----
arch/sh/mm/ioremap.c | 192 --
arch/sh/mm/ioremap.h | 23 -
arch/sh/mm/ioremap_fixed.c | 135 --
arch/sh/mm/kmap.c | 65 -
arch/sh/mm/mmap.c | 184 --
arch/sh/mm/nommu.c | 98 -
arch/sh/mm/numa.c | 56 -
arch/sh/mm/pgtable.c | 57 -
arch/sh/mm/pmb.c | 887 ---------
arch/sh/mm/sram.c | 35 -
arch/sh/mm/tlb-debugfs.c | 160 --
arch/sh/mm/tlb-pteaex.c | 106 --
arch/sh/mm/tlb-sh3.c | 95 -
arch/sh/mm/tlb-sh4.c | 108 --
arch/sh/mm/tlb-urb.c | 93 -
arch/sh/mm/tlbex_32.c | 82 -
arch/sh/mm/tlbflush_32.c | 137 --
arch/sh/mm/uncached.c | 44 -
arch/sh/tools/Makefile | 16 -
arch/sh/tools/gen-mach-types | 48 -
arch/sh/tools/mach-types | 67 -
drivers/clocksource/sh_cmt.c | 8 -
drivers/clocksource/sh_mtu2.c | 8 -
drivers/clocksource/sh_tmu.c | 8 -
drivers/i2c/busses/Kconfig | 4 +-
drivers/media/platform/renesas/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 6 +-
drivers/mmc/host/sh_mmcif.c | 21 +-
drivers/net/ethernet/8390/Kconfig | 2 +-
drivers/net/ethernet/renesas/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 4 +-
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-sh.c | 18 +-
drivers/spi/Kconfig | 4 +-
drivers/tty/serial/Kconfig | 3 +-
drivers/tty/serial/sh-sci.c | 57 -
drivers/tty/vt/keyboard.c | 2 +-
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/video/console/Kconfig | 2 +-
drivers/video/logo/Kconfig | 15 -
drivers/video/logo/Makefile | 3 -
drivers/video/logo/logo.c | 12 -
drivers/video/logo/logo_superh_clut224.ppm | 1604 -----------------
drivers/video/logo/logo_superh_vga16.ppm | 1604 -----------------
fs/Kconfig.binfmt | 2 +-
fs/minix/Kconfig | 2 +-
include/linux/cpuhotplug.h | 1 -
include/linux/sh_intc.h | 4 -
init/Kconfig | 2 +-
kernel/sysctl.c | 3 +-
lib/Kconfig.debug | 2 +-
lib/math/div64.c | 4 +-
lib/test_user_copy.c | 3 +-
scripts/coccinelle/misc/cond_no_effect.cocci | 13 +-
scripts/head-object-list.txt | 1 -
sound/soc/sh/Kconfig | 4 +-
tools/include/asm/barrier.h | 2 -
tools/perf/util/dwarf-regs.c | 1 -
785 files changed, 36 insertions(+), 97715 deletions(-)
delete mode 100644 Documentation/sh/booting.rst
delete mode 100644 Documentation/sh/features.rst
delete mode 100644 Documentation/sh/index.rst
delete mode 100644 Documentation/sh/new-machine.rst
delete mode 100644 Documentation/sh/register-banks.rst
delete mode 100644 arch/sh/Kbuild
delete mode 100644 arch/sh/Kconfig
delete mode 100644 arch/sh/Kconfig.cpu
delete mode 100644 arch/sh/Kconfig.debug
delete mode 100644 arch/sh/Makefile
delete mode 100644 arch/sh/boards/Kconfig
delete mode 100644 arch/sh/boards/Makefile
delete mode 100644 arch/sh/boards/board-apsh4a3a.c
delete mode 100644 arch/sh/boards/board-apsh4ad0a.c
delete mode 100644 arch/sh/boards/board-edosk7705.c
delete mode 100644 arch/sh/boards/board-edosk7760.c
delete mode 100644 arch/sh/boards/board-espt.c
delete mode 100644 arch/sh/boards/board-magicpanelr2.c
delete mode 100644 arch/sh/boards/board-polaris.c
delete mode 100644 arch/sh/boards/board-secureedge5410.c
delete mode 100644 arch/sh/boards/board-sh2007.c
delete mode 100644 arch/sh/boards/board-sh7757lcr.c
delete mode 100644 arch/sh/boards/board-sh7785lcr.c
delete mode 100644 arch/sh/boards/board-shmin.c
delete mode 100644 arch/sh/boards/board-titan.c
delete mode 100644 arch/sh/boards/board-urquell.c
delete mode 100644 arch/sh/boards/mach-ap325rxa/Makefile
delete mode 100644 arch/sh/boards/mach-ap325rxa/sdram.S
delete mode 100644 arch/sh/boards/mach-ap325rxa/setup.c
delete mode 100644 arch/sh/boards/mach-dreamcast/Makefile
delete mode 100644 arch/sh/boards/mach-dreamcast/irq.c
delete mode 100644 arch/sh/boards/mach-dreamcast/rtc.c
delete mode 100644 arch/sh/boards/mach-dreamcast/setup.c
delete mode 100644 arch/sh/boards/mach-ecovec24/Makefile
delete mode 100644 arch/sh/boards/mach-ecovec24/sdram.S
delete mode 100644 arch/sh/boards/mach-ecovec24/setup.c
delete mode 100644 arch/sh/boards/mach-highlander/Kconfig
delete mode 100644 arch/sh/boards/mach-highlander/Makefile
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780mp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7780rp.c
delete mode 100644 arch/sh/boards/mach-highlander/irq-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/pinmux-r7785rp.c
delete mode 100644 arch/sh/boards/mach-highlander/psw.c
delete mode 100644 arch/sh/boards/mach-highlander/setup.c
delete mode 100644 arch/sh/boards/mach-hp6xx/Makefile
delete mode 100644 arch/sh/boards/mach-hp6xx/hp6xx_apm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm.c
delete mode 100644 arch/sh/boards/mach-hp6xx/pm_wakeup.S
delete mode 100644 arch/sh/boards/mach-hp6xx/setup.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/Makefile
delete mode 100644 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
delete mode 100644 arch/sh/boards/mach-kfr2r09/sdram.S
delete mode 100644 arch/sh/boards/mach-kfr2r09/setup.c
delete mode 100644 arch/sh/boards/mach-landisk/Makefile
delete mode 100644 arch/sh/boards/mach-landisk/gio.c
delete mode 100644 arch/sh/boards/mach-landisk/irq.c
delete mode 100644 arch/sh/boards/mach-landisk/psw.c
delete mode 100644 arch/sh/boards/mach-landisk/setup.c
delete mode 100644 arch/sh/boards/mach-lboxre2/Makefile
delete mode 100644 arch/sh/boards/mach-lboxre2/irq.c
delete mode 100644 arch/sh/boards/mach-lboxre2/setup.c
delete mode 100644 arch/sh/boards/mach-microdev/Makefile
delete mode 100644 arch/sh/boards/mach-microdev/fdc37c93xapm.c
delete mode 100644 arch/sh/boards/mach-microdev/io.c
delete mode 100644 arch/sh/boards/mach-microdev/irq.c
delete mode 100644 arch/sh/boards/mach-microdev/setup.c
delete mode 100644 arch/sh/boards/mach-migor/Kconfig
delete mode 100644 arch/sh/boards/mach-migor/Makefile
delete mode 100644 arch/sh/boards/mach-migor/lcd_qvga.c
delete mode 100644 arch/sh/boards/mach-migor/sdram.S
delete mode 100644 arch/sh/boards/mach-migor/setup.c
delete mode 100644 arch/sh/boards/mach-r2d/Kconfig
delete mode 100644 arch/sh/boards/mach-r2d/Makefile
delete mode 100644 arch/sh/boards/mach-r2d/irq.c
delete mode 100644 arch/sh/boards/mach-r2d/setup.c
delete mode 100644 arch/sh/boards/mach-rsk/Kconfig
delete mode 100644 arch/sh/boards/mach-rsk/Makefile
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7203.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7264.c
delete mode 100644 arch/sh/boards/mach-rsk/devices-rsk7269.c
delete mode 100644 arch/sh/boards/mach-rsk/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7780/Kconfig
delete mode 100644 arch/sh/boards/mach-sdk7780/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7780/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7780/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/Makefile
delete mode 100644 arch/sh/boards/mach-sdk7786/fpga.c
delete mode 100644 arch/sh/boards/mach-sdk7786/gpio.c
delete mode 100644 arch/sh/boards/mach-sdk7786/irq.c
delete mode 100644 arch/sh/boards/mach-sdk7786/nmi.c
delete mode 100644 arch/sh/boards/mach-sdk7786/setup.c
delete mode 100644 arch/sh/boards/mach-sdk7786/sram.c
delete mode 100644 arch/sh/boards/mach-se/7206/Makefile
delete mode 100644 arch/sh/boards/mach-se/7206/irq.c
delete mode 100644 arch/sh/boards/mach-se/7206/setup.c
delete mode 100644 arch/sh/boards/mach-se/7343/Makefile
delete mode 100644 arch/sh/boards/mach-se/7343/irq.c
delete mode 100644 arch/sh/boards/mach-se/7343/setup.c
delete mode 100644 arch/sh/boards/mach-se/770x/Makefile
delete mode 100644 arch/sh/boards/mach-se/770x/irq.c
delete mode 100644 arch/sh/boards/mach-se/770x/setup.c
delete mode 100644 arch/sh/boards/mach-se/7721/Makefile
delete mode 100644 arch/sh/boards/mach-se/7721/irq.c
delete mode 100644 arch/sh/boards/mach-se/7721/setup.c
delete mode 100644 arch/sh/boards/mach-se/7722/Makefile
delete mode 100644 arch/sh/boards/mach-se/7722/irq.c
delete mode 100644 arch/sh/boards/mach-se/7722/setup.c
delete mode 100644 arch/sh/boards/mach-se/7724/Makefile
delete mode 100644 arch/sh/boards/mach-se/7724/irq.c
delete mode 100644 arch/sh/boards/mach-se/7724/sdram.S
delete mode 100644 arch/sh/boards/mach-se/7724/setup.c
delete mode 100644 arch/sh/boards/mach-se/7751/Makefile
delete mode 100644 arch/sh/boards/mach-se/7751/irq.c
delete mode 100644 arch/sh/boards/mach-se/7751/setup.c
delete mode 100644 arch/sh/boards/mach-se/7780/Makefile
delete mode 100644 arch/sh/boards/mach-se/7780/irq.c
delete mode 100644 arch/sh/boards/mach-se/7780/setup.c
delete mode 100644 arch/sh/boards/mach-se/Makefile
delete mode 100644 arch/sh/boards/mach-se/board-se7619.c
delete mode 100644 arch/sh/boards/mach-sh03/Makefile
delete mode 100644 arch/sh/boards/mach-sh03/rtc.c
delete mode 100644 arch/sh/boards/mach-sh03/setup.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/Makefile
delete mode 100644 arch/sh/boards/mach-sh7763rdp/irq.c
delete mode 100644 arch/sh/boards/mach-sh7763rdp/setup.c
delete mode 100644 arch/sh/boards/mach-x3proto/Makefile
delete mode 100644 arch/sh/boards/mach-x3proto/gpio.c
delete mode 100644 arch/sh/boards/mach-x3proto/ilsel.c
delete mode 100644 arch/sh/boards/mach-x3proto/setup.c
delete mode 100644 arch/sh/boards/of-generic.c
delete mode 100644 arch/sh/boot/.gitignore
delete mode 100644 arch/sh/boot/Makefile
delete mode 100644 arch/sh/boot/compressed/.gitignore
delete mode 100644 arch/sh/boot/compressed/Makefile
delete mode 100644 arch/sh/boot/compressed/ashiftrt.S
delete mode 100644 arch/sh/boot/compressed/ashldi3.c
delete mode 100644 arch/sh/boot/compressed/ashlsi3.S
delete mode 100644 arch/sh/boot/compressed/ashrsi3.S
delete mode 100644 arch/sh/boot/compressed/cache.c
delete mode 100644 arch/sh/boot/compressed/head_32.S
delete mode 100644 arch/sh/boot/compressed/head_64.S
delete mode 100644 arch/sh/boot/compressed/lshrsi3.S
delete mode 100644 arch/sh/boot/compressed/misc.c
delete mode 100644 arch/sh/boot/compressed/vmlinux.scr
delete mode 100644 arch/sh/boot/dts/Makefile
delete mode 100644 arch/sh/boot/dts/j2_mimas_v2.dts
delete mode 100644 arch/sh/boot/romimage/Makefile
delete mode 100644 arch/sh/boot/romimage/head.S
delete mode 100644 arch/sh/boot/romimage/mmcif-sh7724.c
delete mode 100644 arch/sh/boot/romimage/vmlinux.scr
delete mode 100644 arch/sh/cchips/Kconfig
delete mode 100644 arch/sh/cchips/hd6446x/Makefile
delete mode 100644 arch/sh/cchips/hd6446x/hd64461.c
delete mode 100644 arch/sh/configs/ap325rxa_defconfig
delete mode 100644 arch/sh/configs/apsh4a3a_defconfig
delete mode 100644 arch/sh/configs/apsh4ad0a_defconfig
delete mode 100644 arch/sh/configs/dreamcast_defconfig
delete mode 100644 arch/sh/configs/ecovec24-romimage_defconfig
delete mode 100644 arch/sh/configs/ecovec24_defconfig
delete mode 100644 arch/sh/configs/edosk7705_defconfig
delete mode 100644 arch/sh/configs/edosk7760_defconfig
delete mode 100644 arch/sh/configs/espt_defconfig
delete mode 100644 arch/sh/configs/hp6xx_defconfig
delete mode 100644 arch/sh/configs/j2_defconfig
delete mode 100644 arch/sh/configs/kfr2r09-romimage_defconfig
delete mode 100644 arch/sh/configs/kfr2r09_defconfig
delete mode 100644 arch/sh/configs/landisk_defconfig
delete mode 100644 arch/sh/configs/lboxre2_defconfig
delete mode 100644 arch/sh/configs/magicpanelr2_defconfig
delete mode 100644 arch/sh/configs/microdev_defconfig
delete mode 100644 arch/sh/configs/migor_defconfig
delete mode 100644 arch/sh/configs/polaris_defconfig
delete mode 100644 arch/sh/configs/r7780mp_defconfig
delete mode 100644 arch/sh/configs/r7785rp_defconfig
delete mode 100644 arch/sh/configs/rsk7201_defconfig
delete mode 100644 arch/sh/configs/rsk7203_defconfig
delete mode 100644 arch/sh/configs/rsk7264_defconfig
delete mode 100644 arch/sh/configs/rsk7269_defconfig
delete mode 100644 arch/sh/configs/rts7751r2d1_defconfig
delete mode 100644 arch/sh/configs/rts7751r2dplus_defconfig
delete mode 100644 arch/sh/configs/sdk7780_defconfig
delete mode 100644 arch/sh/configs/sdk7786_defconfig
delete mode 100644 arch/sh/configs/se7206_defconfig
delete mode 100644 arch/sh/configs/se7343_defconfig
delete mode 100644 arch/sh/configs/se7619_defconfig
delete mode 100644 arch/sh/configs/se7705_defconfig
delete mode 100644 arch/sh/configs/se7712_defconfig
delete mode 100644 arch/sh/configs/se7721_defconfig
delete mode 100644 arch/sh/configs/se7722_defconfig
delete mode 100644 arch/sh/configs/se7724_defconfig
delete mode 100644 arch/sh/configs/se7750_defconfig
delete mode 100644 arch/sh/configs/se7751_defconfig
delete mode 100644 arch/sh/configs/se7780_defconfig
delete mode 100644 arch/sh/configs/secureedge5410_defconfig
delete mode 100644 arch/sh/configs/sh03_defconfig
delete mode 100644 arch/sh/configs/sh2007_defconfig
delete mode 100644 arch/sh/configs/sh7710voipgw_defconfig
delete mode 100644 arch/sh/configs/sh7724_generic_defconfig
delete mode 100644 arch/sh/configs/sh7757lcr_defconfig
delete mode 100644 arch/sh/configs/sh7763rdp_defconfig
delete mode 100644 arch/sh/configs/sh7770_generic_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_32bit_defconfig
delete mode 100644 arch/sh/configs/sh7785lcr_defconfig
delete mode 100644 arch/sh/configs/shmin_defconfig
delete mode 100644 arch/sh/configs/shx3_defconfig
delete mode 100644 arch/sh/configs/titan_defconfig
delete mode 100644 arch/sh/configs/ul2_defconfig
delete mode 100644 arch/sh/configs/urquell_defconfig
delete mode 100644 arch/sh/drivers/Kconfig
delete mode 100644 arch/sh/drivers/Makefile
delete mode 100644 arch/sh/drivers/dma/Kconfig
delete mode 100644 arch/sh/drivers/dma/Makefile
delete mode 100644 arch/sh/drivers/dma/dma-api.c
delete mode 100644 arch/sh/drivers/dma/dma-g2.c
delete mode 100644 arch/sh/drivers/dma/dma-pvr2.c
delete mode 100644 arch/sh/drivers/dma/dma-sh.c
delete mode 100644 arch/sh/drivers/dma/dma-sysfs.c
delete mode 100644 arch/sh/drivers/dma/dmabrg.c
delete mode 100644 arch/sh/drivers/heartbeat.c
delete mode 100644 arch/sh/drivers/pci/Makefile
delete mode 100644 arch/sh/drivers/pci/common.c
delete mode 100644 arch/sh/drivers/pci/fixups-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/fixups-landisk.c
delete mode 100644 arch/sh/drivers/pci/fixups-r7780rp.c
delete mode 100644 arch/sh/drivers/pci/fixups-rts7751r2d.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7780.c
delete mode 100644 arch/sh/drivers/pci/fixups-sdk7786.c
delete mode 100644 arch/sh/drivers/pci/fixups-se7751.c
delete mode 100644 arch/sh/drivers/pci/fixups-sh03.c
delete mode 100644 arch/sh/drivers/pci/fixups-snapgear.c
delete mode 100644 arch/sh/drivers/pci/fixups-titan.c
delete mode 100644 arch/sh/drivers/pci/ops-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/ops-sh4.c
delete mode 100644 arch/sh/drivers/pci/ops-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pci-dreamcast.c
delete mode 100644 arch/sh/drivers/pci/pci-sh4.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7751.h
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.c
delete mode 100644 arch/sh/drivers/pci/pci-sh7780.h
delete mode 100644 arch/sh/drivers/pci/pci.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.c
delete mode 100644 arch/sh/drivers/pci/pcie-sh7786.h
delete mode 100644 arch/sh/drivers/platform_early.c
delete mode 100644 arch/sh/drivers/push-switch.c
delete mode 100644 arch/sh/drivers/superhyway/Makefile
delete mode 100644 arch/sh/drivers/superhyway/ops-sh4-202.c
delete mode 100644 arch/sh/include/asm/Kbuild
delete mode 100644 arch/sh/include/asm/adc.h
delete mode 100644 arch/sh/include/asm/addrspace.h
delete mode 100644 arch/sh/include/asm/alignment.h
delete mode 100644 arch/sh/include/asm/asm-offsets.h
delete mode 100644 arch/sh/include/asm/atomic-grb.h
delete mode 100644 arch/sh/include/asm/atomic-irq.h
delete mode 100644 arch/sh/include/asm/atomic-llsc.h
delete mode 100644 arch/sh/include/asm/atomic.h
delete mode 100644 arch/sh/include/asm/barrier.h
delete mode 100644 arch/sh/include/asm/bitops-cas.h
delete mode 100644 arch/sh/include/asm/bitops-grb.h
delete mode 100644 arch/sh/include/asm/bitops-llsc.h
delete mode 100644 arch/sh/include/asm/bitops-op32.h
delete mode 100644 arch/sh/include/asm/bitops.h
delete mode 100644 arch/sh/include/asm/bl_bit.h
delete mode 100644 arch/sh/include/asm/bl_bit_32.h
delete mode 100644 arch/sh/include/asm/bug.h
delete mode 100644 arch/sh/include/asm/bugs.h
delete mode 100644 arch/sh/include/asm/cache.h
delete mode 100644 arch/sh/include/asm/cache_insns.h
delete mode 100644 arch/sh/include/asm/cache_insns_32.h
delete mode 100644 arch/sh/include/asm/cacheflush.h
delete mode 100644 arch/sh/include/asm/checksum.h
delete mode 100644 arch/sh/include/asm/checksum_32.h
delete mode 100644 arch/sh/include/asm/clock.h
delete mode 100644 arch/sh/include/asm/cmpxchg-cas.h
delete mode 100644 arch/sh/include/asm/cmpxchg-grb.h
delete mode 100644 arch/sh/include/asm/cmpxchg-irq.h
delete mode 100644 arch/sh/include/asm/cmpxchg-llsc.h
delete mode 100644 arch/sh/include/asm/cmpxchg-xchg.h
delete mode 100644 arch/sh/include/asm/cmpxchg.h
delete mode 100644 arch/sh/include/asm/device.h
delete mode 100644 arch/sh/include/asm/dma-register.h
delete mode 100644 arch/sh/include/asm/dma.h
delete mode 100644 arch/sh/include/asm/dmabrg.h
delete mode 100644 arch/sh/include/asm/dwarf.h
delete mode 100644 arch/sh/include/asm/elf.h
delete mode 100644 arch/sh/include/asm/entry-macros.S
delete mode 100644 arch/sh/include/asm/extable.h
delete mode 100644 arch/sh/include/asm/fb.h
delete mode 100644 arch/sh/include/asm/fixmap.h
delete mode 100644 arch/sh/include/asm/flat.h
delete mode 100644 arch/sh/include/asm/fpu.h
delete mode 100644 arch/sh/include/asm/freq.h
delete mode 100644 arch/sh/include/asm/ftrace.h
delete mode 100644 arch/sh/include/asm/futex-cas.h
delete mode 100644 arch/sh/include/asm/futex-irq.h
delete mode 100644 arch/sh/include/asm/futex-llsc.h
delete mode 100644 arch/sh/include/asm/futex.h
delete mode 100644 arch/sh/include/asm/gpio.h
delete mode 100644 arch/sh/include/asm/hardirq.h
delete mode 100644 arch/sh/include/asm/hd64461.h
delete mode 100644 arch/sh/include/asm/heartbeat.h
delete mode 100644 arch/sh/include/asm/hugetlb.h
delete mode 100644 arch/sh/include/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/asm/hw_irq.h
delete mode 100644 arch/sh/include/asm/i2c-sh7760.h
delete mode 100644 arch/sh/include/asm/io.h
delete mode 100644 arch/sh/include/asm/io_generic.h
delete mode 100644 arch/sh/include/asm/io_noioport.h
delete mode 100644 arch/sh/include/asm/io_trapped.h
delete mode 100644 arch/sh/include/asm/irq.h
delete mode 100644 arch/sh/include/asm/irqflags.h
delete mode 100644 arch/sh/include/asm/kdebug.h
delete mode 100644 arch/sh/include/asm/kexec.h
delete mode 100644 arch/sh/include/asm/kgdb.h
delete mode 100644 arch/sh/include/asm/kprobes.h
delete mode 100644 arch/sh/include/asm/linkage.h
delete mode 100644 arch/sh/include/asm/machvec.h
delete mode 100644 arch/sh/include/asm/mmiowb.h
delete mode 100644 arch/sh/include/asm/mmu.h
delete mode 100644 arch/sh/include/asm/mmu_context.h
delete mode 100644 arch/sh/include/asm/mmu_context_32.h
delete mode 100644 arch/sh/include/asm/mmzone.h
delete mode 100644 arch/sh/include/asm/module.h
delete mode 100644 arch/sh/include/asm/page.h
delete mode 100644 arch/sh/include/asm/pci.h
delete mode 100644 arch/sh/include/asm/perf_event.h
delete mode 100644 arch/sh/include/asm/pgalloc.h
delete mode 100644 arch/sh/include/asm/pgtable-2level.h
delete mode 100644 arch/sh/include/asm/pgtable-3level.h
delete mode 100644 arch/sh/include/asm/pgtable.h
delete mode 100644 arch/sh/include/asm/pgtable_32.h
delete mode 100644 arch/sh/include/asm/platform_early.h
delete mode 100644 arch/sh/include/asm/posix_types.h
delete mode 100644 arch/sh/include/asm/processor.h
delete mode 100644 arch/sh/include/asm/processor_32.h
delete mode 100644 arch/sh/include/asm/ptrace.h
delete mode 100644 arch/sh/include/asm/ptrace_32.h
delete mode 100644 arch/sh/include/asm/push-switch.h
delete mode 100644 arch/sh/include/asm/reboot.h
delete mode 100644 arch/sh/include/asm/romimage-macros.h
delete mode 100644 arch/sh/include/asm/rtc.h
delete mode 100644 arch/sh/include/asm/seccomp.h
delete mode 100644 arch/sh/include/asm/sections.h
delete mode 100644 arch/sh/include/asm/setup.h
delete mode 100644 arch/sh/include/asm/sfp-machine.h
delete mode 100644 arch/sh/include/asm/sh7760fb.h
delete mode 100644 arch/sh/include/asm/sh_bios.h
delete mode 100644 arch/sh/include/asm/shmparam.h
delete mode 100644 arch/sh/include/asm/siu.h
delete mode 100644 arch/sh/include/asm/smc37c93x.h
delete mode 100644 arch/sh/include/asm/smp-ops.h
delete mode 100644 arch/sh/include/asm/smp.h
delete mode 100644 arch/sh/include/asm/sparsemem.h
delete mode 100644 arch/sh/include/asm/spi.h
delete mode 100644 arch/sh/include/asm/spinlock-cas.h
delete mode 100644 arch/sh/include/asm/spinlock-llsc.h
delete mode 100644 arch/sh/include/asm/spinlock.h
delete mode 100644 arch/sh/include/asm/spinlock_types.h
delete mode 100644 arch/sh/include/asm/sram.h
delete mode 100644 arch/sh/include/asm/stackprotector.h
delete mode 100644 arch/sh/include/asm/stacktrace.h
delete mode 100644 arch/sh/include/asm/string.h
delete mode 100644 arch/sh/include/asm/string_32.h
delete mode 100644 arch/sh/include/asm/suspend.h
delete mode 100644 arch/sh/include/asm/switch_to.h
delete mode 100644 arch/sh/include/asm/switch_to_32.h
delete mode 100644 arch/sh/include/asm/syscall.h
delete mode 100644 arch/sh/include/asm/syscall_32.h
delete mode 100644 arch/sh/include/asm/syscalls.h
delete mode 100644 arch/sh/include/asm/syscalls_32.h
delete mode 100644 arch/sh/include/asm/thread_info.h
delete mode 100644 arch/sh/include/asm/timex.h
delete mode 100644 arch/sh/include/asm/tlb.h
delete mode 100644 arch/sh/include/asm/tlbflush.h
delete mode 100644 arch/sh/include/asm/topology.h
delete mode 100644 arch/sh/include/asm/traps.h
delete mode 100644 arch/sh/include/asm/traps_32.h
delete mode 100644 arch/sh/include/asm/types.h
delete mode 100644 arch/sh/include/asm/uaccess.h
delete mode 100644 arch/sh/include/asm/uaccess_32.h
delete mode 100644 arch/sh/include/asm/uncached.h
delete mode 100644 arch/sh/include/asm/unistd.h
delete mode 100644 arch/sh/include/asm/unwinder.h
delete mode 100644 arch/sh/include/asm/user.h
delete mode 100644 arch/sh/include/asm/vermagic.h
delete mode 100644 arch/sh/include/asm/vga.h
delete mode 100644 arch/sh/include/asm/vmalloc.h
delete mode 100644 arch/sh/include/asm/vmlinux.lds.h
delete mode 100644 arch/sh/include/asm/watchdog.h
delete mode 100644 arch/sh/include/asm/word-at-a-time.h
delete mode 100644 arch/sh/include/cpu-common/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-common/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-common/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-common/cpu/timer.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7203.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7264.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/sh7269.h
delete mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/adc.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dac.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/gpio.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/serial.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/sh7720.h
delete mode 100644 arch/sh/include/cpu-sh3/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/addrspace.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/cache.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma-register.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/fpu.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/freq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/mmu_context.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/rtc.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7722.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7723.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7724.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7734.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7757.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7785.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sh7786.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/shx3.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sigcontext.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/sq.h
delete mode 100644 arch/sh/include/cpu-sh4/cpu/watchdog.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/dma.h
delete mode 100644 arch/sh/include/cpu-sh4a/cpu/serial.h
delete mode 100644 arch/sh/include/mach-common/mach/highlander.h
delete mode 100644 arch/sh/include/mach-common/mach/hp6xx.h
delete mode 100644 arch/sh/include/mach-common/mach/lboxre2.h
delete mode 100644 arch/sh/include/mach-common/mach/magicpanelr2.h
delete mode 100644 arch/sh/include/mach-common/mach/mangle-port.h
delete mode 100644 arch/sh/include/mach-common/mach/microdev.h
delete mode 100644 arch/sh/include/mach-common/mach/r2d.h
delete mode 100644 arch/sh/include/mach-common/mach/romimage.h
delete mode 100644 arch/sh/include/mach-common/mach/sdk7780.h
delete mode 100644 arch/sh/include/mach-common/mach/secureedge5410.h
delete mode 100644 arch/sh/include/mach-common/mach/sh2007.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7763rdp.h
delete mode 100644 arch/sh/include/mach-common/mach/sh7785lcr.h
delete mode 100644 arch/sh/include/mach-common/mach/shmin.h
delete mode 100644 arch/sh/include/mach-common/mach/titan.h
delete mode 100644 arch/sh/include/mach-common/mach/urquell.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/dma.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/maple.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/pci.h
delete mode 100644 arch/sh/include/mach-dreamcast/mach/sysasic.h
delete mode 100644 arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-ecovec24/mach/romimage.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
delete mode 100644 arch/sh/include/mach-kfr2r09/mach/romimage.h
delete mode 100644 arch/sh/include/mach-landisk/mach/gio.h
delete mode 100644 arch/sh/include/mach-landisk/mach/iodata_landisk.h
delete mode 100644 arch/sh/include/mach-migor/mach/migor.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/fpga.h
delete mode 100644 arch/sh/include/mach-sdk7786/mach/irq.h
delete mode 100644 arch/sh/include/mach-se/mach/mrshpc.h
delete mode 100644 arch/sh/include/mach-se/mach/se.h
delete mode 100644 arch/sh/include/mach-se/mach/se7206.h
delete mode 100644 arch/sh/include/mach-se/mach/se7343.h
delete mode 100644 arch/sh/include/mach-se/mach/se7721.h
delete mode 100644 arch/sh/include/mach-se/mach/se7722.h
delete mode 100644 arch/sh/include/mach-se/mach/se7724.h
delete mode 100644 arch/sh/include/mach-se/mach/se7751.h
delete mode 100644 arch/sh/include/mach-se/mach/se7780.h
delete mode 100644 arch/sh/include/mach-sh03/mach/io.h
delete mode 100644 arch/sh/include/mach-sh03/mach/sh03.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/hardware.h
delete mode 100644 arch/sh/include/mach-x3proto/mach/ilsel.h
delete mode 100644 arch/sh/include/uapi/asm/Kbuild
delete mode 100644 arch/sh/include/uapi/asm/auxvec.h
delete mode 100644 arch/sh/include/uapi/asm/byteorder.h
delete mode 100644 arch/sh/include/uapi/asm/cachectl.h
delete mode 100644 arch/sh/include/uapi/asm/cpu-features.h
delete mode 100644 arch/sh/include/uapi/asm/hw_breakpoint.h
delete mode 100644 arch/sh/include/uapi/asm/ioctls.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types.h
delete mode 100644 arch/sh/include/uapi/asm/posix_types_32.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace.h
delete mode 100644 arch/sh/include/uapi/asm/ptrace_32.h
delete mode 100644 arch/sh/include/uapi/asm/sigcontext.h
delete mode 100644 arch/sh/include/uapi/asm/signal.h
delete mode 100644 arch/sh/include/uapi/asm/sockios.h
delete mode 100644 arch/sh/include/uapi/asm/stat.h
delete mode 100644 arch/sh/include/uapi/asm/swab.h
delete mode 100644 arch/sh/include/uapi/asm/unistd.h
delete mode 100644 arch/sh/kernel/.gitignore
delete mode 100644 arch/sh/kernel/Makefile
delete mode 100644 arch/sh/kernel/asm-offsets.c
delete mode 100644 arch/sh/kernel/cpu/Makefile
delete mode 100644 arch/sh/kernel/cpu/adc.c
delete mode 100644 arch/sh/kernel/cpu/clock-cpg.c
delete mode 100644 arch/sh/kernel/cpu/clock.c
delete mode 100644 arch/sh/kernel/cpu/fpu.c
delete mode 100644 arch/sh/kernel/cpu/init.c
delete mode 100644 arch/sh/kernel/cpu/irq/Makefile
delete mode 100644 arch/sh/kernel/cpu/irq/imask.c
delete mode 100644 arch/sh/kernel/cpu/irq/ipr.c
delete mode 100644 arch/sh/kernel/cpu/pfc.c
delete mode 100644 arch/sh/kernel/cpu/proc.c
delete mode 100644 arch/sh/kernel/cpu/sh2/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2/clock-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2/setup-sh7619.c
delete mode 100644 arch/sh/kernel/cpu/sh2/smp-j2.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh2a/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/opcode_helper.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7201.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7203.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7206.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7264.c
delete mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7269.c
delete mode 100644 arch/sh/kernel/cpu/sh3/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7706.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7709.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7712.c
delete mode 100644 arch/sh/kernel/cpu/sh3/entry.S
delete mode 100644 arch/sh/kernel/cpu/sh3/ex.S
delete mode 100644 arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh3.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7705.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh770x.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7710.c
delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7720.c
delete mode 100644 arch/sh/kernel/cpu/sh3/swsusp.S
delete mode 100644 arch/sh/kernel/cpu/sh4/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4.c
delete mode 100644 arch/sh/kernel/cpu/sh4/fpu.c
delete mode 100644 arch/sh/kernel/cpu/sh4/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4/probe.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7750.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh7760.c
delete mode 100644 arch/sh/kernel/cpu/sh4/softfloat.c
delete mode 100644 arch/sh/kernel/cpu/sh4/sq.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/Makefile
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/intc-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/serial-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7343.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7366.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7722.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7724.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7734.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7757.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7763.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7770.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7780.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7785.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7786.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/setup-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/smp-shx3.c
delete mode 100644 arch/sh/kernel/cpu/sh4a/ubc.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/Makefile
delete mode 100644 arch/sh/kernel/cpu/shmobile/cpuidle.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/pm.c
delete mode 100644 arch/sh/kernel/cpu/shmobile/sleep.S
delete mode 100644 arch/sh/kernel/crash_dump.c
delete mode 100644 arch/sh/kernel/debugtraps.S
delete mode 100644 arch/sh/kernel/disassemble.c
delete mode 100644 arch/sh/kernel/dma-coherent.c
delete mode 100644 arch/sh/kernel/dumpstack.c
delete mode 100644 arch/sh/kernel/dwarf.c
delete mode 100644 arch/sh/kernel/entry-common.S
delete mode 100644 arch/sh/kernel/ftrace.c
delete mode 100644 arch/sh/kernel/head_32.S
delete mode 100644 arch/sh/kernel/hw_breakpoint.c
delete mode 100644 arch/sh/kernel/idle.c
delete mode 100644 arch/sh/kernel/io.c
delete mode 100644 arch/sh/kernel/io_trapped.c
delete mode 100644 arch/sh/kernel/iomap.c
delete mode 100644 arch/sh/kernel/ioport.c
delete mode 100644 arch/sh/kernel/irq.c
delete mode 100644 arch/sh/kernel/irq_32.c
delete mode 100644 arch/sh/kernel/kdebugfs.c
delete mode 100644 arch/sh/kernel/kgdb.c
delete mode 100644 arch/sh/kernel/kprobes.c
delete mode 100644 arch/sh/kernel/machine_kexec.c
delete mode 100644 arch/sh/kernel/machvec.c
delete mode 100644 arch/sh/kernel/module.c
delete mode 100644 arch/sh/kernel/nmi_debug.c
delete mode 100644 arch/sh/kernel/perf_callchain.c
delete mode 100644 arch/sh/kernel/perf_event.c
delete mode 100644 arch/sh/kernel/process.c
delete mode 100644 arch/sh/kernel/process_32.c
delete mode 100644 arch/sh/kernel/ptrace.c
delete mode 100644 arch/sh/kernel/ptrace_32.c
delete mode 100644 arch/sh/kernel/reboot.c
delete mode 100644 arch/sh/kernel/relocate_kernel.S
delete mode 100644 arch/sh/kernel/return_address.c
delete mode 100644 arch/sh/kernel/setup.c
delete mode 100644 arch/sh/kernel/sh_bios.c
delete mode 100644 arch/sh/kernel/sh_ksyms_32.c
delete mode 100644 arch/sh/kernel/signal_32.c
delete mode 100644 arch/sh/kernel/smp.c
delete mode 100644 arch/sh/kernel/stacktrace.c
delete mode 100644 arch/sh/kernel/swsusp.c
delete mode 100644 arch/sh/kernel/sys_sh.c
delete mode 100644 arch/sh/kernel/sys_sh32.c
delete mode 100644 arch/sh/kernel/syscalls/Makefile
delete mode 100644 arch/sh/kernel/syscalls/syscall.tbl
delete mode 100644 arch/sh/kernel/syscalls_32.S
delete mode 100644 arch/sh/kernel/time.c
delete mode 100644 arch/sh/kernel/topology.c
delete mode 100644 arch/sh/kernel/traps.c
delete mode 100644 arch/sh/kernel/traps_32.c
delete mode 100644 arch/sh/kernel/unwinder.c
delete mode 100644 arch/sh/kernel/vmlinux.lds.S
delete mode 100644 arch/sh/kernel/vsyscall/.gitignore
delete mode 100644 arch/sh/kernel/vsyscall/Makefile
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-note.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-syscall.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall-trapa.S
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.c
delete mode 100644 arch/sh/kernel/vsyscall/vsyscall.lds.S
delete mode 100644 arch/sh/lib/Makefile
delete mode 100644 arch/sh/lib/__clear_user.S
delete mode 100644 arch/sh/lib/ashiftrt.S
delete mode 100644 arch/sh/lib/ashldi3.c
delete mode 100644 arch/sh/lib/ashlsi3.S
delete mode 100644 arch/sh/lib/ashrdi3.c
delete mode 100644 arch/sh/lib/ashrsi3.S
delete mode 100644 arch/sh/lib/checksum.S
delete mode 100644 arch/sh/lib/copy_page.S
delete mode 100644 arch/sh/lib/delay.c
delete mode 100644 arch/sh/lib/div64-generic.c
delete mode 100644 arch/sh/lib/div64.S
delete mode 100644 arch/sh/lib/io.c
delete mode 100644 arch/sh/lib/libgcc.h
delete mode 100644 arch/sh/lib/lshrdi3.c
delete mode 100644 arch/sh/lib/lshrsi3.S
delete mode 100644 arch/sh/lib/mcount.S
delete mode 100644 arch/sh/lib/memchr.S
delete mode 100644 arch/sh/lib/memcpy-sh4.S
delete mode 100644 arch/sh/lib/memcpy.S
delete mode 100644 arch/sh/lib/memmove.S
delete mode 100644 arch/sh/lib/memset-sh4.S
delete mode 100644 arch/sh/lib/memset.S
delete mode 100644 arch/sh/lib/movmem.S
delete mode 100644 arch/sh/lib/strlen.S
delete mode 100644 arch/sh/lib/udiv_qrnnd.S
delete mode 100644 arch/sh/lib/udivsi3.S
delete mode 100644 arch/sh/lib/udivsi3_i4i-Os.S
delete mode 100644 arch/sh/lib/udivsi3_i4i.S
delete mode 100644 arch/sh/math-emu/Makefile
delete mode 100644 arch/sh/math-emu/math.c
delete mode 100644 arch/sh/math-emu/sfp-util.h
delete mode 100644 arch/sh/mm/Kconfig
delete mode 100644 arch/sh/mm/Makefile
delete mode 100644 arch/sh/mm/alignment.c
delete mode 100644 arch/sh/mm/asids-debugfs.c
delete mode 100644 arch/sh/mm/cache-debugfs.c
delete mode 100644 arch/sh/mm/cache-j2.c
delete mode 100644 arch/sh/mm/cache-sh2.c
delete mode 100644 arch/sh/mm/cache-sh2a.c
delete mode 100644 arch/sh/mm/cache-sh3.c
delete mode 100644 arch/sh/mm/cache-sh4.c
delete mode 100644 arch/sh/mm/cache-sh7705.c
delete mode 100644 arch/sh/mm/cache-shx3.c
delete mode 100644 arch/sh/mm/cache.c
delete mode 100644 arch/sh/mm/consistent.c
delete mode 100644 arch/sh/mm/extable_32.c
delete mode 100644 arch/sh/mm/fault.c
delete mode 100644 arch/sh/mm/flush-sh4.c
delete mode 100644 arch/sh/mm/hugetlbpage.c
delete mode 100644 arch/sh/mm/init.c
delete mode 100644 arch/sh/mm/ioremap.c
delete mode 100644 arch/sh/mm/ioremap.h
delete mode 100644 arch/sh/mm/ioremap_fixed.c
delete mode 100644 arch/sh/mm/kmap.c
delete mode 100644 arch/sh/mm/mmap.c
delete mode 100644 arch/sh/mm/nommu.c
delete mode 100644 arch/sh/mm/numa.c
delete mode 100644 arch/sh/mm/pgtable.c
delete mode 100644 arch/sh/mm/pmb.c
delete mode 100644 arch/sh/mm/sram.c
delete mode 100644 arch/sh/mm/tlb-debugfs.c
delete mode 100644 arch/sh/mm/tlb-pteaex.c
delete mode 100644 arch/sh/mm/tlb-sh3.c
delete mode 100644 arch/sh/mm/tlb-sh4.c
delete mode 100644 arch/sh/mm/tlb-urb.c
delete mode 100644 arch/sh/mm/tlbex_32.c
delete mode 100644 arch/sh/mm/tlbflush_32.c
delete mode 100644 arch/sh/mm/uncached.c
delete mode 100644 arch/sh/tools/Makefile
delete mode 100644 arch/sh/tools/gen-mach-types
delete mode 100644 arch/sh/tools/mach-types
delete mode 100644 drivers/video/logo/logo_superh_clut224.ppm
delete mode 100644 drivers/video/logo/logo_superh_vga16.ppm
diff --git a/Documentation/arch.rst b/Documentation/arch.rst
index 41a66a8b38e424..18669458eec4dd 100644
--- a/Documentation/arch.rst
+++ b/Documentation/arch.rst
@@ -22,7 +22,6 @@ implementation.
powerpc/index
riscv/index
s390/index
- sh/index
sparc/index
x86/index
xtensa/index
diff --git a/Documentation/sh/booting.rst b/Documentation/sh/booting.rst
deleted file mode 100644
index d851c49a01bf07..00000000000000
--- a/Documentation/sh/booting.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-DeviceTree Booting
-------------------
-
- Device-tree compatible SH bootloaders are expected to provide the physical
- address of the device tree blob in r4. Since legacy bootloaders did not
- guarantee any particular initial register state, kernels built to
- inter-operate with old bootloaders must either use a builtin DTB or
- select a legacy board option (something other than CONFIG_SH_DEVICE_TREE)
- that does not use device tree. Support for the latter is being phased out
- in favor of device tree.
diff --git a/Documentation/sh/features.rst b/Documentation/sh/features.rst
deleted file mode 100644
index f722af3b6c9934..00000000000000
--- a/Documentation/sh/features.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. kernel-feat:: $srctree/Documentation/features sh
diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
deleted file mode 100644
index c64776738cf6b2..00000000000000
--- a/Documentation/sh/index.rst
+++ /dev/null
@@ -1,56 +0,0 @@
-=======================
-SuperH Interfaces Guide
-=======================
-
-:Author: Paul Mundt
-
-.. toctree::
- :maxdepth: 1
-
- booting
- new-machine
- register-banks
-
- features
-
-Memory Management
-=================
-
-SH-4
-----
-
-Store Queue API
-~~~~~~~~~~~~~~~
-
-.. kernel-doc:: arch/sh/kernel/cpu/sh4/sq.c
- :export:
-
-Machine Specific Interfaces
-===========================
-
-mach-dreamcast
---------------
-
-.. kernel-doc:: arch/sh/boards/mach-dreamcast/rtc.c
- :internal:
-
-mach-x3proto
-------------
-
-.. kernel-doc:: arch/sh/boards/mach-x3proto/ilsel.c
- :export:
-
-Busses
-======
-
-SuperHyway
-----------
-
-.. kernel-doc:: drivers/sh/superhyway/superhyway.c
- :export:
-
-Maple
------
-
-.. kernel-doc:: drivers/sh/maple/maple.c
- :export:
diff --git a/Documentation/sh/new-machine.rst b/Documentation/sh/new-machine.rst
deleted file mode 100644
index e501c52b3b30d2..00000000000000
--- a/Documentation/sh/new-machine.rst
+++ /dev/null
@@ -1,277 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=============================
-Adding a new board to LinuxSH
-=============================
-
- Paul Mundt <lethal@linux-sh.org>
-
-This document attempts to outline what steps are necessary to add support
-for new boards to the LinuxSH port under the new 2.5 and 2.6 kernels. This
-also attempts to outline some of the noticeable changes between the 2.4
-and the 2.5/2.6 SH backend.
-
-1. New Directory Structure
-==========================
-
-The first thing to note is the new directory structure. Under 2.4, most
-of the board-specific code (with the exception of stboards) ended up
-in arch/sh/kernel/ directly, with board-specific headers ending up in
-include/asm-sh/. For the new kernel, things are broken out by board type,
-companion chip type, and CPU type. Looking at a tree view of this directory
-hierarchy looks like the following:
-
-Board-specific code::
-
- .
- |-- arch
- | `-- sh
- | `-- boards
- | |-- adx
- | | `-- board-specific files
- | |-- bigsur
- | | `-- board-specific files
- | |
- | ... more boards here ...
- |
- `-- include
- `-- asm-sh
- |-- adx
- | `-- board-specific headers
- |-- bigsur
- | `-- board-specific headers
- |
- .. more boards here ...
-
-Next, for companion chips::
-
- .
- `-- arch
- `-- sh
- `-- cchips
- `-- hd6446x
- `-- hd64461
- `-- cchip-specific files
-
-... and so on. Headers for the companion chips are treated the same way as
-board-specific headers. Thus, include/asm-sh/hd64461 is home to all of the
-hd64461-specific headers.
-
-Finally, CPU family support is also abstracted::
-
- .
- |-- arch
- | `-- sh
- | |-- kernel
- | | `-- cpu
- | | |-- sh2
- | | | `-- SH-2 generic files
- | | |-- sh3
- | | | `-- SH-3 generic files
- | | `-- sh4
- | | `-- SH-4 generic files
- | `-- mm
- | `-- This is also broken out per CPU family, so each family can
- | have their own set of cache/tlb functions.
- |
- `-- include
- `-- asm-sh
- |-- cpu-sh2
- | `-- SH-2 specific headers
- |-- cpu-sh3
- | `-- SH-3 specific headers
- `-- cpu-sh4
- `-- SH-4 specific headers
-
-It should be noted that CPU subtypes are _not_ abstracted. Thus, these still
-need to be dealt with by the CPU family specific code.
-
-2. Adding a New Board
-=====================
-
-The first thing to determine is whether the board you are adding will be
-isolated, or whether it will be part of a family of boards that can mostly
-share the same board-specific code with minor differences.
-
-In the first case, this is just a matter of making a directory for your
-board in arch/sh/boards/ and adding rules to hook your board in with the
-build system (more on this in the next section). However, for board families
-it makes more sense to have a common top-level arch/sh/boards/ directory
-and then populate that with sub-directories for each member of the family.
-Both the Solution Engine and the hp6xx boards are an example of this.
-
-After you have setup your new arch/sh/boards/ directory, remember that you
-should also add a directory in include/asm-sh for headers localized to this
-board (if there are going to be more than one). In order to interoperate
-seamlessly with the build system, it's best to have this directory the same
-as the arch/sh/boards/ directory name, though if your board is again part of
-a family, the build system has ways of dealing with this (via incdir-y
-overloading), and you can feel free to name the directory after the family
-member itself.
-
-There are a few things that each board is required to have, both in the
-arch/sh/boards and the include/asm-sh/ hierarchy. In order to better
-explain this, we use some examples for adding an imaginary board. For
-setup code, we're required at the very least to provide definitions for
-get_system_type() and platform_setup(). For our imaginary board, this
-might look something like::
-
- /*
- * arch/sh/boards/vapor/setup.c - Setup code for imaginary board
- */
- #include <linux/init.h>
-
- const char *get_system_type(void)
- {
- return "FooTech Vaporboard";
- }
-
- int __init platform_setup(void)
- {
- /*
- * If our hardware actually existed, we would do real
- * setup here. Though it's also sane to leave this empty
- * if there's no real init work that has to be done for
- * this board.
- */
-
- /* Start-up imaginary PCI ... */
-
- /* And whatever else ... */
-
- return 0;
- }
-
-Our new imaginary board will also have to tie into the machvec in order for it
-to be of any use.
-
-machvec functions fall into a number of categories:
-
- - I/O functions to IO memory (inb etc) and PCI/main memory (readb etc).
- - I/O mapping functions (ioport_map, ioport_unmap, etc).
- - a 'heartbeat' function.
- - PCI and IRQ initialization routines.
- - Consistent allocators (for boards that need special allocators,
- particularly for allocating out of some board-specific SRAM for DMA
- handles).
-
-There are machvec functions added and removed over time, so always be sure to
-consult include/asm-sh/machvec.h for the current state of the machvec.
-
-The kernel will automatically wrap in generic routines for undefined function
-pointers in the machvec at boot time, as machvec functions are referenced
-unconditionally throughout most of the tree. Some boards have incredibly
-sparse machvecs (such as the dreamcast and sh03), whereas others must define
-virtually everything (rts7751r2d).
-
-Adding a new machine is relatively trivial (using vapor as an example):
-
-If the board-specific definitions are quite minimalistic, as is the case for
-the vast majority of boards, simply having a single board-specific header is
-sufficient.
-
- - add a new file include/asm-sh/vapor.h which contains prototypes for
- any machine specific IO functions prefixed with the machine name, for
- example vapor_inb. These will be needed when filling out the machine
- vector.
-
- Note that these prototypes are generated automatically by setting
- __IO_PREFIX to something sensible. A typical example would be::
-
- #define __IO_PREFIX vapor
- #include <asm/io_generic.h>
-
- somewhere in the board-specific header. Any boards being ported that still
- have a legacy io.h should remove it entirely and switch to the new model.
-
- - Add machine vector definitions to the board's setup.c. At a bare minimum,
- this must be defined as something like::
-
- struct sh_machine_vector mv_vapor __initmv = {
- .mv_name = "vapor",
- };
- ALIAS_MV(vapor)
-
- - finally add a file arch/sh/boards/vapor/io.c, which contains definitions of
- the machine specific io functions (if there are enough to warrant it).
-
-3. Hooking into the Build System
-================================
-
-Now that we have the corresponding directories setup, and all of the
-board-specific code is in place, it's time to look at how to get the
-whole mess to fit into the build system.
-
-Large portions of the build system are now entirely dynamic, and merely
-require the proper entry here and there in order to get things done.
-
-The first thing to do is to add an entry to arch/sh/Kconfig, under the
-"System type" menu::
-
- config SH_VAPOR
- bool "Vapor"
- help
- select Vapor if configuring for a FooTech Vaporboard.
-
-next, this has to be added into arch/sh/Makefile. All boards require a
-machdir-y entry in order to be built. This entry needs to be the name of
-the board directory as it appears in arch/sh/boards, even if it is in a
-sub-directory (in which case, all parent directories below arch/sh/boards/
-need to be listed). For our new board, this entry can look like::
-
- machdir-$(CONFIG_SH_VAPOR) += vapor
-
-provided that we've placed everything in the arch/sh/boards/vapor/ directory.
-
-Next, the build system assumes that your include/asm-sh directory will also
-be named the same. If this is not the case (as is the case with multiple
-boards belonging to a common family), then the directory name needs to be
-implicitly appended to incdir-y. The existing code manages this for the
-Solution Engine and hp6xx boards, so see these for an example.
-
-Once that is taken care of, it's time to add an entry for the mach type.
-This is done by adding an entry to the end of the arch/sh/tools/mach-types
-list. The method for doing this is self explanatory, and so we won't waste
-space restating it here. After this is done, you will be able to use
-implicit checks for your board if you need this somewhere throughout the
-common code, such as::
-
- /* Make sure we're on the FooTech Vaporboard */
- if (!mach_is_vapor())
- return -ENODEV;
-
-also note that the mach_is_boardname() check will be implicitly forced to
-lowercase, regardless of the fact that the mach-types entries are all
-uppercase. You can read the script if you really care, but it's pretty ugly,
-so you probably don't want to do that.
-
-Now all that's left to do is providing a defconfig for your new board. This
-way, other people who end up with this board can simply use this config
-for reference instead of trying to guess what settings are supposed to be
-used on it.
-
-Also, as soon as you have copied over a sample .config for your new board
-(assume arch/sh/configs/vapor_defconfig), you can also use this directly as a
-build target, and it will be implicitly listed as such in the help text.
-
-Looking at the 'make help' output, you should now see something like:
-
-Architecture specific targets (sh):
-
- ======================= =============================================
- zImage Compressed kernel image (arch/sh/boot/zImage)
- adx_defconfig Build for adx
- cqreek_defconfig Build for cqreek
- dreamcast_defconfig Build for dreamcast
- ...
- vapor_defconfig Build for vapor
- ======================= =============================================
-
-which then allows you to do::
-
- $ make ARCH=sh CROSS_COMPILE=sh4-linux- vapor_defconfig vmlinux
-
-which will in turn copy the defconfig for this board, run it through
-oldconfig (prompting you for any new options since the time of creation),
-and start you on your way to having a functional kernel for your new
-board.
diff --git a/Documentation/sh/register-banks.rst b/Documentation/sh/register-banks.rst
deleted file mode 100644
index 2bef5c8fcbbc06..00000000000000
--- a/Documentation/sh/register-banks.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================================
-Notes on register bank usage in the kernel
-==========================================
-
-Introduction
-------------
-
-The SH-3 and SH-4 CPU families traditionally include a single partial register
-bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
-may have more full-featured banking or simply no such capabilities at all.
-
-SR.RB banking
--------------
-
-In the case of this type of banking, banked registers are mapped directly to
-r0 ... r7 if SR.RB is set to the bank we are interested in, otherwise ldc/stc
-can still be used to reference the banked registers (as r0_bank ... r7_bank)
-when in the context of another bank. The developer must keep the SR.RB value
-in mind when writing code that utilizes these banked registers, for obvious
-reasons. Userspace is also not able to poke at the bank1 values, so these can
-be used rather effectively as scratch registers by the kernel.
-
-Presently the kernel uses several of these registers.
-
- - r0_bank, r1_bank (referenced as k0 and k1, used for scratch
- registers when doing exception handling).
-
- - r2_bank (used to track the EXPEVT/INTEVT code)
-
- - Used by do_IRQ() and friends for doing irq mapping based off
- of the interrupt exception vector jump table offset
-
- - r6_bank (global interrupt mask)
-
- - The SR.IMASK interrupt handler makes use of this to set the
- interrupt priority level (used by local_irq_enable())
-
- - r7_bank (current)
diff --git a/MAINTAINERS b/MAINTAINERS
index e278cd5d0de00e..5899ff135e3deb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20067,16 +20067,6 @@ S: Maintained
F: Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
F: drivers/watchdog/sunplus_wdt.c
-SUPERH
-M: Yoshinori Sato <ysato@users.sourceforge.jp>
-M: Rich Felker <dalias@libc.org>
-L: linux-sh@vger.kernel.org
-S: Maintained
-Q: http://patchwork.kernel.org/project/linux-sh/list/
-F: Documentation/sh/
-F: arch/sh/
-F: drivers/sh/
-
SUSPEND TO RAM
M: "Rafael J. Wysocki" <rafael@kernel.org>
M: Len Brown <len.brown@intel.com>
diff --git a/arch/sh/Kbuild b/arch/sh/Kbuild
deleted file mode 100644
index be171880977e5d..00000000000000
--- a/arch/sh/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += kernel/ mm/ boards/
-obj-$(CONFIG_SH_FPU_EMU) += math-emu/
-obj-$(CONFIG_USE_BUILTIN_DTB) += boot/dts/
-
-# for cleaning
-subdir- += boot
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
deleted file mode 100644
index 0665ac0add0b49..00000000000000
--- a/arch/sh/Kconfig
+++ /dev/null
@@ -1,793 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config SUPERH
- def_bool y
- select ARCH_32BIT_OFF_T
- select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
- select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
- select ARCH_HAVE_CUSTOM_GPIO_H
- select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
- select ARCH_HAS_BINFMT_FLAT if !MMU
- select ARCH_HAS_CURRENT_STACK_POINTER
- select ARCH_HAS_GIGANTIC_PAGE
- select ARCH_HAS_GCOV_PROFILE_ALL
- select ARCH_HAS_PTE_SPECIAL
- select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- select ARCH_HIBERNATION_POSSIBLE if MMU
- select ARCH_MIGHT_HAVE_PC_PARPORT
- select ARCH_WANT_IPC_PARSE_VERSION
- select CPU_NO_EFFICIENT_FFS
- select DMA_DECLARE_COHERENT
- select GENERIC_ATOMIC64
- select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
- select GENERIC_IDLE_POLL_SETUP
- select GENERIC_IRQ_SHOW
- select GENERIC_PCI_IOMAP if PCI
- select GENERIC_SCHED_CLOCK
- select GENERIC_SMP_IDLE_THREAD
- select GUP_GET_PXX_LOW_HIGH if X2TLB
- select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_KGDB
- select HAVE_ARCH_SECCOMP_FILTER
- select HAVE_ARCH_TRACEHOOK
- select HAVE_DEBUG_BUGVERBOSE
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FAST_GUP if MMU
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_FUNCTION_TRACER
- select HAVE_FTRACE_MCOUNT_RECORD
- select HAVE_HW_BREAKPOINT
- select HAVE_IOREMAP_PROT if MMU && !X2TLB
- select HAVE_KERNEL_BZIP2
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_LZMA
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_XZ
- select HAVE_KPROBES
- select HAVE_KRETPROBES
- select HAVE_MIXED_BREAKPOINTS_REGS
- select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
- select HAVE_NMI
- select HAVE_PATA_PLATFORM
- select HAVE_PERF_EVENTS
- select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_UID16
- select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
- select HAVE_STACKPROTECTOR
- select HAVE_SYSCALL_TRACEPOINTS
- select IRQ_FORCED_THREADING
- select MODULES_USE_ELF_RELA
- select NEED_SG_DMA_LENGTH
- select NO_DMA if !MMU && !DMA_COHERENT
- select NO_GENERIC_PCI_IOPORT_MAP if PCI
- select OLD_SIGACTION
- select OLD_SIGSUSPEND
- select PCI_DOMAINS if PCI
- select PERF_EVENTS
- select PERF_USE_VMALLOC
- select RTC_LIB
- select SPARSE_IRQ
- select TRACE_IRQFLAGS_SUPPORT
- help
- The SuperH is a RISC processor targeted for use in embedded systems
- and consumer electronics; it was also used in the Sega Dreamcast
- gaming console. The SuperH port has a home page at
- <http://www.linux-sh.org/>.
-
-config GENERIC_BUG
- def_bool y
- depends on BUG
-
-config GENERIC_HWEIGHT
- def_bool y
-
-config GENERIC_CALIBRATE_DELAY
- bool
-
-config GENERIC_LOCKBREAK
- def_bool y
- depends on SMP && PREEMPTION
-
-config ARCH_SUSPEND_POSSIBLE
- def_bool n
-
-config ARCH_HIBERNATION_POSSIBLE
- def_bool n
-
-config SYS_SUPPORTS_APM_EMULATION
- bool
- select ARCH_SUSPEND_POSSIBLE
-
-config SYS_SUPPORTS_SMP
- bool
-
-config SYS_SUPPORTS_NUMA
- bool
-
-config STACKTRACE_SUPPORT
- def_bool y
-
-config LOCKDEP_SUPPORT
- def_bool y
-
-config ARCH_HAS_ILOG2_U32
- def_bool n
-
-config ARCH_HAS_ILOG2_U64
- def_bool n
-
-config NO_IOPORT_MAP
- def_bool !PCI
- depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
- !SH_SOLUTION_ENGINE
-
-config IO_TRAPPED
- bool
-
-config SWAP_IO_SPACE
- bool
-
-config DMA_COHERENT
- bool
-
-config DMA_NONCOHERENT
- def_bool !NO_DMA && !DMA_COHERENT
- select ARCH_HAS_DMA_PREP_COHERENT
- select ARCH_HAS_SYNC_DMA_FOR_DEVICE
- select DMA_DIRECT_REMAP
-
-config PGTABLE_LEVELS
- default 3 if X2TLB
- default 2
-
-menu "System type"
-
-#
-# Processor families
-#
-config CPU_SH2
- bool
- select SH_INTC
-
-config CPU_SH2A
- bool
- select CPU_SH2
- select UNCACHED_MAPPING
-
-config CPU_J2
- bool
- select CPU_SH2
- select OF
- select OF_EARLY_FLATTREE
-
-config CPU_SH3
- bool
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4
- bool
- select ARCH_SUPPORTS_HUGETLBFS if MMU
- select CPU_HAS_INTEVT
- select CPU_HAS_SR_RB
- select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SH_INTC
- select SYS_SUPPORTS_SH_TMU
-
-config CPU_SH4A
- bool
- select CPU_SH4
-
-config CPU_SH4AL_DSP
- bool
- select CPU_SH4A
- select CPU_HAS_DSP
-
-config CPU_SHX2
- bool
-
-config CPU_SHX3
- bool
- select DMA_COHERENT
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_NUMA
-
-config ARCH_SHMOBILE
- bool
- select ARCH_SUSPEND_POSSIBLE
- select PM
-
-config CPU_HAS_PMU
- depends on CPU_SH4 || CPU_SH4A
- default y
- bool
-
-choice
- prompt "Processor sub-type selection"
-
-#
-# Processor subtypes
-#
-
-# SH-2 Processor Support
-
-config CPU_SUBTYPE_SH7619
- bool "Support SH7619 processor"
- select CPU_SH2
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_J2
- bool "Support J2 processor"
- select CPU_J2
- select SYS_SUPPORTS_SMP
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-
-# SH-2A Processor Support
-
-config CPU_SUBTYPE_SH7201
- bool "Support SH7201 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7203
- bool "Support SH7203 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7206
- bool "Support SH7206 processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7263
- bool "Support SH7263 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
-
-config CPU_SUBTYPE_SH7264
- bool "Support SH7264 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_SH7269
- bool "Support SH7269 processor"
- select CPU_SH2A
- select CPU_HAS_FPU
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_MTU2
- select PINCTRL
-
-config CPU_SUBTYPE_MXG
- bool "Support MX-G processor"
- select CPU_SH2A
- select SYS_SUPPORTS_SH_MTU2
- help
- Select MX-G if running on an R8A03022BG part.
-
-# SH-3 Processor Support
-
-config CPU_SUBTYPE_SH7705
- bool "Support SH7705 processor"
- select CPU_SH3
-
-config CPU_SUBTYPE_SH7706
- bool "Support SH7706 processor"
- select CPU_SH3
- help
- Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
-
-config CPU_SUBTYPE_SH7707
- bool "Support SH7707 processor"
- select CPU_SH3
- help
- Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
-
-config CPU_SUBTYPE_SH7708
- bool "Support SH7708 processor"
- select CPU_SH3
- help
- Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
- if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-config CPU_SUBTYPE_SH7709
- bool "Support SH7709 processor"
- select CPU_SH3
- help
- Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
-
-config CPU_SUBTYPE_SH7710
- bool "Support SH7710 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7710 if you have a SH3-DSP SH7710 CPU.
-
-config CPU_SUBTYPE_SH7712
- bool "Support SH7712 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- help
- Select SH7712 if you have a SH3-DSP SH7712 CPU.
-
-config CPU_SUBTYPE_SH7720
- bool "Support SH7720 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- select PINCTRL
- help
- Select SH7720 if you have a SH3-DSP SH7720 CPU.
-
-config CPU_SUBTYPE_SH7721
- bool "Support SH7721 processor"
- select CPU_SH3
- select CPU_HAS_DSP
- select SYS_SUPPORTS_SH_CMT
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7721 if you have a SH3-DSP SH7721 CPU.
-
-# SH-4 Processor Support
-
-config CPU_SUBTYPE_SH7750
- bool "Support SH7750 processor"
- select CPU_SH4
- help
- Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-config CPU_SUBTYPE_SH7091
- bool "Support SH7091 processor"
- select CPU_SH4
- help
- Select SH7091 if you have an SH-4 based Sega device (such as
- the Dreamcast, Naomi, and Naomi 2).
-
-config CPU_SUBTYPE_SH7750R
- bool "Support SH7750R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7750S
- bool "Support SH7750S processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7751
- bool "Support SH7751 processor"
- select CPU_SH4
- help
- Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
- or if you have a HD6417751R CPU.
-
-config CPU_SUBTYPE_SH7751R
- bool "Support SH7751R processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH7760
- bool "Support SH7760 processor"
- select CPU_SH4
-
-config CPU_SUBTYPE_SH4_202
- bool "Support SH4-202 processor"
- select CPU_SH4
-
-# SH-4A Processor Support
-
-config CPU_SUBTYPE_SH7723
- bool "Support SH7723 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7723 if you have an SH-MobileR2 CPU.
-
-config CPU_SUBTYPE_SH7724
- bool "Support SH7724 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
- help
- Select SH7724 if you have an SH-MobileR2R CPU.
-
-config CPU_SUBTYPE_SH7734
- bool "Support SH7734 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7734 if you have a SH4A SH7734 CPU.
-
-config CPU_SUBTYPE_SH7757
- bool "Support SH7757 processor"
- select CPU_SH4A
- select CPU_SHX2
- select PINCTRL
- help
- Select SH7757 if you have a SH4A SH7757 CPU.
-
-config CPU_SUBTYPE_SH7763
- bool "Support SH7763 processor"
- select CPU_SH4A
- select USB_OHCI_SH if USB_OHCI_HCD
- help
- Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
-
-config CPU_SUBTYPE_SH7770
- bool "Support SH7770 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7780
- bool "Support SH7780 processor"
- select CPU_SH4A
-
-config CPU_SUBTYPE_SH7785
- bool "Support SH7785 processor"
- select CPU_SH4A
- select CPU_SHX2
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select PINCTRL
-
-config CPU_SUBTYPE_SH7786
- bool "Support SH7786 processor"
- select CPU_SH4A
- select CPU_SHX3
- select CPU_HAS_PTEAEX
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select USB_OHCI_SH if USB_OHCI_HCD
- select USB_EHCI_SH if USB_EHCI_HCD
- select PINCTRL
-
-config CPU_SUBTYPE_SHX3
- bool "Support SH-X3 processor"
- select CPU_SH4A
- select CPU_SHX3
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select GPIOLIB
- select PINCTRL
-
-# SH4AL-DSP Processor Support
-
-config CPU_SUBTYPE_SH7343
- bool "Support SH7343 processor"
- select CPU_SH4AL_DSP
- select ARCH_SHMOBILE
- select SYS_SUPPORTS_SH_CMT
-
-config CPU_SUBTYPE_SH7722
- bool "Support SH7722 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
- select PINCTRL
-
-config CPU_SUBTYPE_SH7366
- bool "Support SH7366 processor"
- select CPU_SH4AL_DSP
- select CPU_SHX2
- select ARCH_SHMOBILE
- select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_SH_CMT
-
-endchoice
-
-source "arch/sh/mm/Kconfig"
-
-source "arch/sh/Kconfig.cpu"
-
-source "arch/sh/boards/Kconfig"
-
-menu "Timer and clock configuration"
-
-config SH_PCLK_FREQ
- int "Peripheral clock frequency (in Hz)"
- depends on SH_CLK_CPG_LEGACY
- default "31250000" if CPU_SUBTYPE_SH7619
- default "33333333" if CPU_SUBTYPE_SH7770 || \
- CPU_SUBTYPE_SH7760 || \
- CPU_SUBTYPE_SH7705 || \
- CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || \
- CPU_SUBTYPE_MXG
- default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
- default "66000000" if CPU_SUBTYPE_SH4_202
- default "50000000"
- help
- This option is used to specify the peripheral clock frequency.
- This is necessary for determining the reference clock value on
- platforms lacking an RTC.
-
-config SH_CLK_CPG
- def_bool y
-
-config SH_CLK_CPG_LEGACY
- depends on SH_CLK_CPG
- def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
- !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
- !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
- !CPU_SUBTYPE_SH7269
-
-endmenu
-
-menu "CPU Frequency scaling"
-source "drivers/cpufreq/Kconfig"
-endmenu
-
-source "arch/sh/drivers/Kconfig"
-
-endmenu
-
-menu "Kernel features"
-
-source "kernel/Kconfig.hz"
-
-config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on MMU
- select KEXEC_CORE
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. As of this writing the exact hardware
- interface is strongly in flux, so no good recommendation can be
- made.
-
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on BROKEN_ON_SMP
- help
- Generate crash dump after being started by kexec.
- This should be normally only set in special crash dump kernels
- which are loaded in the main kernel with kexec-tools into
- a specially reserved region and then later executed after
- a crash by kdump/kexec. The crash dump kernel must be compiled
- to a memory address not used by the main kernel using
- PHYSICAL_START.
-
- For more details see Documentation/admin-guide/kdump/kdump.rst
-
-config KEXEC_JUMP
- bool "kexec jump (EXPERIMENTAL)"
- depends on KEXEC && HIBERNATION
- help
- Jump between original kernel and kexeced kernel and invoke
- code via KEXEC
-
-config PHYSICAL_START
- hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
- default MEMORY_START
- help
- This gives the physical address where the kernel is loaded
- and is ordinarily the same as MEMORY_START.
-
- Different values are primarily used in the case of kexec on panic
- where the fail safe kernel needs to run at a different address
- than the panic-ed kernel.
-
-config SMP
- bool "Symmetric multi-processing support"
- depends on SYS_SUPPORTS_SMP
- help
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y.
-
- If you say N here, the kernel will run on uni- and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- uniprocessor machines. On a uniprocessor machine, the kernel
- will run faster if you say N here.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below.
-
- See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
- available at <https://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
- depends on SMP
- default "4" if CPU_SUBTYPE_SHX3
- default "2"
- help
- This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 32 and the
- minimum value which makes sense is 2.
-
- This is purely to save memory - each supported CPU adds
- approximately eight kilobytes to the kernel image.
-
-config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP
- help
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
-
-config GUSA
- def_bool y
- depends on !SMP
- help
- This enables support for gUSA (general UserSpace Atomicity).
- This is the default implementation for both UP and non-ll/sc
- CPUs, and is used by the libc, amongst others.
-
- For additional information, design information can be found
- in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
-
- This should only be disabled for special cases where alternate
- atomicity implementations exist.
-
-config GUSA_RB
- bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
- depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
- help
- Enabling this option will allow the kernel to implement some
- atomic operations using a software implementation of load-locked/
- store-conditional (LLSC). On machines which do not have hardware
- LLSC, this should be more efficient than the other alternative of
- disabling interrupts around the atomic sequence.
-
-config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU
- default y
- help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
-
-source "drivers/sh/Kconfig"
-
-endmenu
-
-menu "Boot options"
-
-config USE_BUILTIN_DTB
- bool "Use builtin DTB"
- default n
- depends on SH_DEVICE_TREE
- help
- Link a device tree blob for particular hardware into the kernel,
- suppressing use of the DTB pointer provided by the bootloader.
- This option should only be used with legacy bootloaders that are
- not capable of providing a DTB to the kernel, or for experimental
- hardware without stable device tree bindings.
-
-config BUILTIN_DTB_SOURCE
- string "Source file for builtin DTB"
- default ""
- depends on USE_BUILTIN_DTB
- help
- Base name (without suffix, relative to arch/sh/boot/dts) for the
- a DTS file that will be used to produce the DTB linked into the
- kernel.
-
-config ZERO_PAGE_OFFSET
- hex
- default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
- SH_7751_SOLUTION_ENGINE
- default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00001000"
- help
- This sets the default offset of zero page.
-
-config BOOT_LINK_OFFSET
- hex
- default "0x00210000" if SH_SHMIN
- default "0x00810000" if SH_7780_SOLUTION_ENGINE
- default "0x009e0000" if SH_TITAN
- default "0x01800000" if SH_SDK7780
- default "0x02000000" if SH_EDOSK7760
- default "0x00800000"
- help
- This option allows you to set the link address offset of the zImage.
- This can be useful if you are on a board which has a small amount of
- memory.
-
-config ENTRY_OFFSET
- hex
- default "0x00001000" if PAGE_SIZE_4KB
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00004000" if PAGE_SIZE_16KB
- default "0x00010000" if PAGE_SIZE_64KB
- default "0x00000000"
-
-config ROMIMAGE_MMCIF
- bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
- depends on CPU_SUBTYPE_SH7724
- help
- Say Y here to include experimental MMCIF loading code in
- romImage. With this enabled it is possible to write the romImage
- kernel image to an MMC card and boot the kernel straight from
- the reset vector. At reset the processor Mask ROM will load the
- first part of the romImage which in turn loads the rest the kernel
- image to RAM using the MMCIF hardware block.
-
-choice
- prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- help
- Setting this option allows the kernel command line arguments
- to be set.
-
-config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
- help
- Given string will overwrite any arguments passed in by
- a bootloader.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- Given string will be concatenated with arguments passed in
- by a bootloader.
-
-endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
-endmenu
-
-menu "Bus options"
-
-config SUPERHYWAY
- tristate "SuperHyway Bus support"
- depends on CPU_SUBTYPE_SH4_202
-
-config MAPLE
- bool "Maple Bus support"
- depends on SH_DREAMCAST
- help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
-
-endmenu
-
-menu "Power management options (EXPERIMENTAL)"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
deleted file mode 100644
index fff419f3d7574c..00000000000000
--- a/arch/sh/Kconfig.cpu
+++ /dev/null
@@ -1,100 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Processor features"
-
-choice
- prompt "Endianness selection"
- default CPU_LITTLE_ENDIAN
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
-
-config CPU_BIG_ENDIAN
- bool "Big Endian"
-
-endchoice
-
-config SH_FPU
- def_bool y
- prompt "FPU support"
- depends on CPU_HAS_FPU
- help
- Selecting this option will enable support for SH processors that
- have FPU units (ie, SH77xx).
-
- This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
- def_bool n
- prompt "FPU emulation support"
- depends on !SH_FPU
- help
- Selecting this option will enable support for software FPU emulation.
- Most SH-3 users will want to say Y here, whereas most SH-4 users will
- want to say N.
-
-config SH_DSP
- def_bool y
- prompt "DSP support"
- depends on CPU_HAS_DSP
- help
- Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
- This option must be set in order to enable the DSP.
-
-config SH_ADC
- def_bool y
- prompt "ADC support"
- depends on CPU_SH3
- help
- Selecting this option will allow the Linux kernel to use SH3 on-chip
- ADC module.
-
- If unsure, say N.
-
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
- help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
- bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
- help
- This enables support for a speculative instruction fetch for
- subroutine return. There are various pitfalls associated with
- this, as outlined in the SH7780 hardware manual.
-
- If unsure, say N.
-
-config CPU_HAS_INTEVT
- bool
-
-config CPU_HAS_IPR_IRQ
- bool
-
-config CPU_HAS_SR_RB
- bool
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.rst> for further
- information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEAEX
- bool
-
-config CPU_HAS_DSP
- bool
-
-config CPU_HAS_FPU
- bool
-
-endmenu
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
deleted file mode 100644
index 10290e5c1f4387..00000000000000
--- a/arch/sh/Kconfig.debug
+++ /dev/null
@@ -1,78 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config SH_STANDARD_BIOS
- bool "Use LinuxSH standard BIOS"
- help
- Say Y here if your target has the gdb-sh-stub
- package from www.m17n.org (or any conforming standard LinuxSH BIOS)
- in FLASH or EPROM. The kernel will use standard BIOS calls during
- boot for various housekeeping tasks (including calls to read and
- write characters to a system console, get a MAC address from an
- on-board Ethernet interface, and shut down the hardware). Note this
- does not work with machines with an existing operating system in
- mask ROM and no flash (WindowsCE machines fall in this category).
- If unsure, say N.
-
-config STACK_DEBUG
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit. Saying Y here will add overhead to
- every function call and will therefore incur a major
- performance hit. Most users should say N.
-
-config 4KSTACKS
- bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
- help
- If you say Y here the kernel will use a 4Kb stacksize for the
- kernel stack attached to each process/thread. This facilitates
- running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- depends on DEBUG_KERNEL && BROKEN
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-config DUMP_CODE
- bool "Show disassembly of nearby code in register dumps"
- depends on DEBUG_KERNEL
- default y if DEBUG_BUGVERBOSE
- default n
- help
- This prints out a code trace of the instructions leading up to
- the faulting instruction as a debugging aid. As this does grow
- the kernel in size a bit, most users will want to say N here.
-
- Those looking for more verbose debugging output should say Y.
-
-config DWARF_UNWINDER
- bool "Enable the DWARF unwinder for stacktraces"
- depends on DEBUG_KERNEL
- select FRAME_POINTER
- default n
- help
- Enabling this option will make stacktraces more accurate, at
- the cost of an increase in overall kernel size.
-
-config SH_NO_BSS_INIT
- bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
- depends on DEBUG_KERNEL
- default n
- help
- If running in painfully slow environments, such as an RTL
- simulation or from remote memory via SHdebug, where the memory
- can already be guaranteed to ber zeroed on boot, say Y.
-
- For all other cases, say N. If this option seems perplexing, or
- you aren't sure, say N.
-
-config MCOUNT
- def_bool y
- depends on STACK_DEBUG || FUNCTION_TRACER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
deleted file mode 100644
index 5c8776482530c3..00000000000000
--- a/arch/sh/Makefile
+++ /dev/null
@@ -1,215 +0,0 @@
-#
-# arch/sh/Makefile
-#
-# Copyright (C) 1999 Kaz Kojima
-# Copyright (C) 2002 - 2008 Paul Mundt
-# Copyright (C) 2002 M. R. Brown
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-ifdef cross_compiling
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
- endif
-endif
-
-KBUILD_DEFCONFIG := shx3_defconfig
-
-isa-y := any
-isa-$(CONFIG_SH_DSP) := sh
-isa-$(CONFIG_CPU_SH2) := sh2
-isa-$(CONFIG_CPU_SH2A) := sh2a
-isa-$(CONFIG_CPU_SH3) := sh3
-isa-$(CONFIG_CPU_SH4) := sh4
-isa-$(CONFIG_CPU_SH4A) := sh4a
-isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
-
-isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
-isa-y := $(isa-y)-up
-
-cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
-cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,)
-cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
- $(call cc-option,-m2a-nofpu,) \
- $(call cc-option,-m4-nofpu,)
-cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,)
-cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
- $(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
- $(call cc-option,-m4a-nofpu,)
-cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,)
-
-ifeq ($(cflags-y),)
-#
-# In the case where we are stuck with a compiler that has been uselessly
-# restricted to a particular ISA, a favourite default of newer GCCs when
-# extensive multilib targets are not provided, ensure we get the best fit
-# regarding FP generation. This is intentionally stupid (albeit many
-# orders of magnitude less than GCC's default behaviour), as anything
-# with a large number of multilib targets better have been built
-# correctly for the target in mind.
-#
-cflags-y += $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
- grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
-# At this point, anything goes.
-isaflags-y := $(call as-option,-Wa$(comma)-isa=any,)
-else
-#
-# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
-# support it, while -Wa,-dsp by itself limits the range of usable opcodes
-# on certain CPU subtypes. Try the ISA variant first, and if that fails,
-# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
-# opcodes, we always want the best ISA tuning the version of binutils
-# will provide.
-#
-isaflags-y := $(call as-option,-Wa$(comma)-isa=$(isa-y),)
-
-isaflags-$(CONFIG_SH_DSP) := \
- $(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
-endif
-
-cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
-
-cflags-y += $(call cc-option,-mno-fdpic)
-cflags-y += $(isaflags-y) -ffreestanding
-
-OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
- -R .stab -R .stabstr -S
-
-# Give the various platforms the opportunity to set default image types
-defaultimage-y := zImage
-defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
-defaultimage-$(CONFIG_SH_RSK) := uImage
-defaultimage-$(CONFIG_SH_URQUELL) := uImage
-defaultimage-$(CONFIG_SH_MIGOR) := uImage
-defaultimage-$(CONFIG_SH_AP325RXA) := uImage
-defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
-defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
-defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
-defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
-
-# Set some sensible Kbuild defaults
-boot := arch/sh/boot
-KBUILD_IMAGE := $(boot)/$(defaultimage-y)
-
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking.
-#
-UTS_MACHINE := sh
-LDFLAGS_vmlinux += -e _stext
-
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-ld-bfd := elf32-sh-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EL
-else
-ld-bfd := elf32-shbig-linux
-LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
-KBUILD_LDFLAGS += -EB
-endif
-
-export ld-bfd
-
-# Mach groups
-machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
-machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
-machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
-machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
-machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
-machdir-$(CONFIG_SH_MIGOR) += mach-migor
-machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
-machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
-machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
-machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
-machdir-$(CONFIG_SH_SDK7786) += mach-sdk7786
-machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
-machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
-machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
-machdir-$(CONFIG_SH_LANDISK) += mach-landisk
-machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
-machdir-$(CONFIG_SH_RSK) += mach-rsk
-
-ifneq ($(machdir-y),)
-core-y += $(addprefix arch/sh/boards/, \
- $(filter-out ., $(patsubst %,%/,$(machdir-y))))
-endif
-
-# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
-machdir-y += mach-common
-
-# Companion chips
-core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-
-#
-# CPU header paths
-#
-# These are ordered by optimization level. A CPU family that is a subset
-# of another (ie, SH-2A / SH-2), is picked up first, with increasing
-# levels of genericness if nothing more suitable is situated in the
-# hierarchy.
-#
-# As an example, in order of preference, SH-2A > SH-2 > common definitions.
-#
-cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a
-cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
-cpuincdir-y += cpu-common # Must be last
-
-drivers-y += arch/sh/drivers/
-
-cflags-y += $(foreach d, $(cpuincdir-y), -I $(srctree)/arch/sh/include/$(d)) \
- $(foreach d, $(machdir-y), -I $(srctree)/arch/sh/include/$(d))
-
-KBUILD_CFLAGS += -pipe $(cflags-y)
-KBUILD_CPPFLAGS += $(cflags-y)
-KBUILD_AFLAGS += $(cflags-y)
-
-ifeq ($(CONFIG_MCOUNT),y)
- KBUILD_CFLAGS += -pg
-endif
-
-ifeq ($(CONFIG_DWARF_UNWINDER),y)
- KBUILD_CFLAGS += -fasynchronous-unwind-tables
-endif
-
-libs-y := arch/sh/lib/ $(libs-y)
-
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
- uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
- romImage
-PHONY += $(BOOT_TARGETS)
-
-all: $(notdir $(KBUILD_IMAGE))
-
-$(BOOT_TARGETS): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-compressed: zImage
-
-archprepare:
- $(Q)$(MAKE) $(build)=arch/sh/tools include/generated/machtypes.h
-
-archheaders:
- $(Q)$(MAKE) $(build)=arch/sh/kernel/syscalls all
-
-define archhelp
- @echo ' zImage - Compressed kernel image'
- @echo ' romImage - Compressed ROM image, if supported'
- @echo ' vmlinux.srec - Create an ELF S-record'
- @echo ' vmlinux.bin - Create an uncompressed binary image'
- @echo '* uImage - Alias to bootable U-Boot image'
- @echo ' uImage.srec - Create an S-record for U-Boot'
- @echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
- @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
- @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
- @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
- @echo ' uImage.xz - Kernel-only image for U-Boot (xz)'
- @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
-endef
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
deleted file mode 100644
index 83bcb6d2dacadd..00000000000000
--- a/arch/sh/boards/Kconfig
+++ /dev/null
@@ -1,400 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_ALPHA_BOARD
- bool
-
-config SH_CUSTOM_CLK
- def_bool y
- depends on !SH_DEVICE_TREE
- select HAVE_LEGACY_CLK
-
-config SH_DEVICE_TREE
- bool
- select OF
- select OF_EARLY_FLATTREE
- select TIMER_OF
- select COMMON_CLK
- select GENERIC_CALIBRATE_DELAY
-
-config SH_JCORE_SOC
- bool "J-Core SoC"
- select SH_DEVICE_TREE
- select CLKSRC_JCORE_PIT
- select JCORE_AIC
- depends on CPU_J2
- help
- Select this option to include drivers core components of the
- J-Core SoC, including interrupt controllers and timers.
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7724_SOLUTION_ENGINE
- bool "SolutionEngine7724"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select 7724 SolutionEngine if configuring for a Hitachi SH7724
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select HAVE_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- select IO_TRAPPED if MMU
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK
- bool "Renesas Starter Kit"
- depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
- CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select this option if configuring for any of the RSK+ MCU
- evaluation platforms.
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select HAVE_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_SDK7786
- bool "SDK7786"
- depends on CPU_SUBTYPE_SH7786
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
- select HAVE_SRAM_POOL
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select SDK7786 if configuring for a Renesas Technology Europe
- SH7786-65nm board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select HAVE_PCI
- select IO_TRAPPED if MMU
-
-config SH_SH7757LCR
- bool "SH7757LCR"
- depends on CPU_SUBTYPE_SH7757
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select HAVE_PCI
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR && 29BIT
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_SH7785LCR_PT
- bool "SH7785LCR prototype board on 32-bit MMU mode"
- depends on SH_SH7785LCR && 32BIT
- default n
- help
- If you use prototype board, this option is enabled.
-
-config SH_URQUELL
- bool "Urquell"
- depends on CPU_SUBTYPE_SH7786
- select GPIOLIB
- select HAVE_PCI
- select NO_IOPORT_MAP if !PCI
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_KFR2R09
- bool "KFR2R09"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- "Kit For R2R for 2009" support.
-
-config SH_ECOVEC
- bool "EcoVec"
- depends on CPU_SUBTYPE_SH7724
- select GPIOLIB
- select SND_SOC_DA7210 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Renesas "R0P7724LC0011/21RL (EcoVec)" support.
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_ESPT
- bool "ESPT"
- depends on CPU_SUBTYPE_SH7763
- help
- Select ESPT if configuring for a Renesas SH7763
- with gigabit ether evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_EDOSK7760
- bool "EDOSK7760"
- depends on CPU_SUBTYPE_SH7760
- help
- Select if configuring for a Renesas EDOSK7760
- evaluation board.
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select HAVE_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select HAVE_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
- select NO_IOPORT_MAP if !PCI
- select IRQ_DOMAIN
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- select GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_POLARIS
- bool "SMSC Polaris"
- select CPU_HAS_IPR_IRQ
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7709
- help
- Select if configuring for an SMSC Polaris development board
-
-config SH_SH2007
- bool "SH-2007 board"
- select NO_IOPORT_MAP
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7780
- help
- SH-2007 is a single-board computer based around SH7780 chip
- intended for embedded applications.
- It has an Ethernet interface (SMC9118), direct connected
- Compact Flash socket, two serial ports and PC-104 bus.
- More information at <http://sh2000.sh-linux.org>.
-
-config SH_APSH4A3A
- bool "AP-SH4A-3A"
- select SH_ALPHA_BOARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7785
- help
- Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
-
-config SH_APSH4AD0A
- bool "AP-SH4AD-0A"
- select SH_ALPHA_BOARD
- select HAVE_PCI
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on CPU_SUBTYPE_SH7786
- help
- Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
-
-source "arch/sh/boards/mach-r2d/Kconfig"
-source "arch/sh/boards/mach-highlander/Kconfig"
-source "arch/sh/boards/mach-sdk7780/Kconfig"
-source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-rsk/Kconfig"
-
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int "Magic Panel R2 Version"
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
-
-endmenu
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
deleted file mode 100644
index 4002a22a7c409b..00000000000000
--- a/arch/sh/boards/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Specific board support, not covered by a mach group.
-#
-obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
-obj-$(CONFIG_SH_SH2007) += board-sh2007.o
-obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
-obj-$(CONFIG_SH_URQUELL) += board-urquell.o
-obj-$(CONFIG_SH_SHMIN) += board-shmin.o
-obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o
-obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
-obj-$(CONFIG_SH_ESPT) += board-espt.o
-obj-$(CONFIG_SH_POLARIS) += board-polaris.o
-obj-$(CONFIG_SH_TITAN) += board-titan.o
-obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o
-obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o
-obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o
-
-obj-$(CONFIG_SH_DEVICE_TREE) += of-generic.o
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
deleted file mode 100644
index abf19a947df354..00000000000000
--- a/arch/sh/boards/board-apsh4a3a.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4A-3A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01000000 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4a3a_devices[] __initdata = {
- &nor_flash_device,
- &smsc911x_device,
-};
-
-static int __init apsh4a3a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4a3a_devices,
- ARRAY_SIZE(apsh4a3a_devices));
-}
-device_initcall(apsh4a3a_devices_setup);
-
-static int apsh4a3a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4a3a_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
-}
-
-static void __init apsh4a3a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int apsh4a3a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value &= ~MODE_PIN0; /* Clock Mode 16 */
- value &= ~MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value |= MODE_PIN4;
- value &= ~MODE_PIN5; /* 16-bit Area0 bus width */
- value |= MODE_PIN6; /* Area 0 SRAM interface */
- value |= MODE_PIN7;
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN10; /* Crystal resonator */
- value |= MODE_PIN11; /* Display Unit */
- value |= MODE_PIN12;
- value &= ~MODE_PIN13; /* 29-bit address mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4a3a __initmv = {
- .mv_name = "AP-SH4A-3A",
- .mv_setup = apsh4a3a_setup,
- .mv_clk_init = apsh4a3a_clk_init,
- .mv_init_irq = apsh4a3a_init_irq,
- .mv_mode_pins = apsh4a3a_mode_pins,
-};
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
deleted file mode 100644
index fa031a16c9b5c7..00000000000000
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ALPHAPROJECT AP-SH4AD-0A Support.
- *
- * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0xA4000000,
- .end = 0xA4000000 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x200),
- .end = evt2irq(0x200),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *apsh4ad0a_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init apsh4ad0a_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(apsh4ad0a_devices,
- ARRAY_SIZE(apsh4ad0a_devices));
-}
-device_initcall(apsh4ad0a_devices_setup);
-
-static int apsh4ad0a_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of SW1 and SW2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode 3 */
- value |= MODE_PIN1;
- value &= ~MODE_PIN2;
- value &= ~MODE_PIN3;
- value &= ~MODE_PIN4; /* 16-bit Area0 bus width */
- value |= MODE_PIN5;
- value |= MODE_PIN6;
- value |= MODE_PIN7; /* Normal mode */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Crystal resonator */
- value &= ~MODE_PIN10; /* 29-bit address mode */
- value &= ~MODE_PIN11; /* PCI-E Root port */
- value &= ~MODE_PIN12; /* 4 lane + 1 lane */
- value |= MODE_PIN13; /* AUD Enable */
- value &= ~MODE_PIN14; /* Normal Operation */
-
- return value;
-}
-
-static int apsh4ad0a_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333000);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init apsh4ad0a_setup(char **cmdline_p)
-{
- pr_info("Alpha Project AP-SH4AD-0A support:\n");
-}
-
-static void __init apsh4ad0a_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_apsh4ad0a __initmv = {
- .mv_name = "AP-SH4AD-0A",
- .mv_setup = apsh4ad0a_setup,
- .mv_mode_pins = apsh4ad0a_mode_pins,
- .mv_clk_init = apsh4ad0a_clk_init,
- .mv_init_irq = apsh4ad0a_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
deleted file mode 100644
index 0de7d603da2d8c..00000000000000
--- a/arch/sh/boards/board-edosk7705.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-#define ETHERNET_IRQ evt2irq(0x320)
-
-static void __init sh_edosk7705_init_irq(void)
-{
- make_imask_irq(ETHERNET_IRQ);
-}
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ETHERNET_IRQ,
- .end = ETHERNET_IRQ,
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7705_devices[] __initdata = {
- &smc91x_dev,
-};
-
-static int __init init_edosk7705_devices(void)
-{
- return platform_add_devices(edosk7705_devices,
- ARRAY_SIZE(edosk7705_devices));
-}
-device_initcall(init_edosk7705_devices);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
- .mv_name = "EDOSK7705",
- .mv_init_irq = sh_edosk7705_init_irq,
-};
diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c
deleted file mode 100644
index 7569d85c5ff5a8..00000000000000
--- a/arch/sh/boards/board-edosk7760.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas Europe EDOSK7760 Board Support
- *
- * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
- * Author: Luca Santini <luca.santini@spesonline.com>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/i2c.h>
-#include <linux/mtd/physmap.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-#include <asm/delay.h>
-#include <asm/i2c-sh7760.h>
-#include <linux/sizes.h>
-
-/* Bus state controller registers for CS4 area */
-#define BSC_CS4BCR 0xA4FD0010
-#define BSC_CS4WCR 0xA4FD0030
-
-#define SMC_IOBASE 0xA2000000
-#define SMC_IO_OFFSET 0x300
-#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
-
-/* NOR flash */
-static struct mtd_partition edosk7760_nor_flash_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "fs",
- .offset = MTDPART_OFS_APPEND,
- .size = (26 << 20),
- }, {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data edosk7760_nor_flash_data = {
- .width = 4,
- .parts = edosk7760_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(edosk7760_nor_flash_partitions),
-};
-
-static struct resource edosk7760_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00000000 + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device edosk7760_nor_flash_device = {
- .name = "physmap-flash",
- .resource = edosk7760_nor_flash_resources,
- .num_resources = ARRAY_SIZE(edosk7760_nor_flash_resources),
- .dev = {
- .platform_data = &edosk7760_nor_flash_data,
- },
-};
-
-/* i2c initialization functions */
-static struct sh7760_i2c_platdata i2c_pd = {
- .speed_khz = 400,
-};
-
-static struct resource sh7760_i2c1_res[] = {
- {
- .start = SH7760_I2C1_MMIO,
- .end = SH7760_I2C1_MMIOEND,
- .flags = IORESOURCE_MEM,
- },{
- .start = evt2irq(0x9e0),
- .end = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c1_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
-
- .name = SH7760_I2C_DEVNAME,
- .id = 1,
- .resource = sh7760_i2c1_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c1_res),
-};
-
-static struct resource sh7760_i2c0_res[] = {
- {
- .start = SH7760_I2C0_MMIO,
- .end = SH7760_I2C0_MMIOEND,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x9c0),
- .end = evt2irq(0x9c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh7760_i2c0_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
- .name = SH7760_I2C_DEVNAME,
- .id = 0,
- .resource = sh7760_i2c0_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c0_res),
-};
-
-/* eth initialization functions */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x2a0),
- .end = evt2irq(0x2a0),
- .flags = IORESOURCE_IRQ ,
- }
-};
-
-static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
-
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* platform init code */
-static struct platform_device *edosk7760_devices[] __initdata = {
- &smc91x_dev,
- &edosk7760_nor_flash_device,
- &sh7760_i2c0_dev,
- &sh7760_i2c1_dev,
-};
-
-static int __init init_edosk7760_devices(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-
- return platform_add_devices(edosk7760_devices,
- ARRAY_SIZE(edosk7760_devices));
-}
-device_initcall(init_edosk7760_devices);
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_edosk7760 __initmv = {
- .mv_name = "EDOSK7760",
-};
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
deleted file mode 100644
index 6e784b5cf5a0b2..00000000000000
--- a/arch/sh/boards/board-espt.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Data Technology Inc. ESPT-GIGA board support
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-/* NOR Flash */
-static struct mtd_partition espt_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * SZ_128K),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * SZ_128K),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data espt_nor_flash_data = {
- .width = 2,
- .parts = espt_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
-};
-
-static struct resource espt_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device espt_nor_flash_device = {
- .name = "physmap-flash",
- .resource = espt_nor_flash_resources,
- .num_resources = ARRAY_SIZE(espt_nor_flash_resources),
- .dev = {
- .platform_data = &espt_nor_flash_data,
- },
-};
-
-/* SH-Ether */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 0,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device espt_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-static struct platform_device *espt_devices[] __initdata = {
- &espt_nor_flash_device,
- &espt_eth_device,
-};
-
-static int __init espt_devices_setup(void)
-{
- return platform_add_devices(espt_devices,
- ARRAY_SIZE(espt_devices));
-}
-device_initcall(espt_devices_setup);
-
-static struct sh_machine_vector mv_espt __initmv = {
- .mv_name = "ESPT-GIGA",
-};
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
deleted file mode 100644
index 56bd386ff3b043..00000000000000
--- a/arch/sh/boards/board-magicpanelr2.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/magicpanel/setup.c
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Magic Panel Release 2 board setup
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/sh_intc.h>
-#include <mach/magicpanelr2.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7720.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
-
-/* Wait until reset finished. Timeout is 100ms. */
-static int __init ethernet_reset_finished(void)
-{
- int i;
-
- if (LAN9115_READY)
- return 1;
-
- for (i = 0; i < 10; ++i) {
- mdelay(10);
- if (LAN9115_READY)
- return 1;
- }
-
- return 0;
-}
-
-static void __init reset_ethernet(void)
-{
- /* PMDR: LAN_RESET=on */
- CLRBITS_OUTB(0x10, PORT_PMDR);
-
- udelay(200);
-
- /* PMDR: LAN_RESET=off */
- SETBITS_OUTB(0x10, PORT_PMDR);
-}
-
-static void __init setup_chip_select(void)
-{
- /* CS2: LAN (0x08000000 - 0x0bffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x36db0400, CS2BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x000003c0, CS2WCR);
-
- /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS4BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS4WCR);
-
- /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5ABCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5AWCR);
-
- /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS5BBCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- __raw_writel(0x00100981, CS5BWCR);
-
- /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- __raw_writel(0x00000200, CS6ABCR);
- /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- __raw_writel(0x001009C1, CS6AWCR);
-}
-
-static void __init setup_port_multiplexing(void)
-{
- /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
- * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
- */
- __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
-
- /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
- * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
- */
- __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
-
- /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
- * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
- */
- __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
-
- /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
- * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
- */
- __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
-
- /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
- * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
- */
- __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
-
- /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
- * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
- */
- __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
-
- /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
- * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
- */
- __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
-
- /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
- * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
- */
- __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
-
- /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
- * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
- */
- __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
-
- /* K7 (x); K6 (x); K5 (x); K4 (x);
- * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
- */
- __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
-
- /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
- * L3 TCK; L2 (x); L1 (x); L0 (x);
- */
- __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
-
- /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
- * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
- * M1 CS5B(CAN3_CS); M0 GPI+(nc);
- */
- __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
-
- /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
- * LAN_RESET=off, BUZZER=off, LCD_BL=off
- */
-#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- __raw_writeb(0x30, PORT_PMDR);
-#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- __raw_writeb(0xF0, PORT_PMDR);
-#else
-#error Unknown revision of PLATFORM_MP_R2
-#endif
-
- /* P7 (x); P6 (x); P5 (x);
- * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
- * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
- */
- __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- __raw_writeb(0x10, PORT_PPDR);
-
- /* R7 A25; R6 A24; R5 A23; R4 A22;
- * R3 A21; R2 A20; R1 A19; R0 A0;
- */
- gpio_request(GPIO_FN_A25, NULL);
- gpio_request(GPIO_FN_A24, NULL);
- gpio_request(GPIO_FN_A23, NULL);
- gpio_request(GPIO_FN_A22, NULL);
- gpio_request(GPIO_FN_A21, NULL);
- gpio_request(GPIO_FN_A20, NULL);
- gpio_request(GPIO_FN_A19, NULL);
- gpio_request(GPIO_FN_A0, NULL);
-
- /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
- * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
- */
- __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
-
- /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
- * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
- */
- __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
-
- /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
- * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
- */
- __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
-
- /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
- * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
- */
- __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
-}
-
-static void __init mpr2_setup(char **cmdline_p)
-{
- /* set Pin Select Register A:
- * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
- * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
- */
- __raw_writew(0xAABC, PORT_PSELA);
- /* set Pin Select Register B:
- * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
- * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
- */
- __raw_writew(0x3C00, PORT_PSELB);
- /* set Pin Select Register C:
- * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
- */
- __raw_writew(0x0000, PORT_PSELC);
- /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
- * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
- */
- __raw_writew(0x0000, PORT_PSELD);
- /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- __raw_writew(0x0101, PORT_UTRCTL);
- /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- __raw_writew(0xA5C0, PORT_UCLKCR_W);
-
- setup_chip_select();
-
- setup_port_multiplexing();
-
- reset_ethernet();
-
- printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
- CONFIG_SH_MAGIC_PANEL_R2_VERSION);
-
- if (ethernet_reset_finished() == 0)
- printk(KERN_WARNING "Ethernet not ready\n");
-}
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0xa8000000,
- .end = 0xabffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct mtd_partition mpr2_partitions[] = {
- /* Reserved for bootloader, read-only */
- {
- .name = "Bootloader",
- .offset = 0x00000000UL,
- .size = MPR2_MTD_BOOTLOADER_SIZE,
- .mask_flags = MTD_WRITEABLE,
- },
- /* Reserved for kernel image */
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MPR2_MTD_KERNEL_SIZE,
- },
- /* Rest is used for Flash FS */
- {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = mpr2_partitions,
- .nr_parts = ARRAY_SIZE(mpr2_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x2000000UL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-/*
- * Add all resources to the platform_device
- */
-
-static struct platform_device *mpr2_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &flash_device,
-};
-
-
-static int __init mpr2_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
-}
-device_initcall(mpr2_devices_setup);
-
-/*
- * Initialize IRQ setting
- */
-static void __init init_mpr2_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
-
- irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
- irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
- irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
- irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
- irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
- irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
-
- intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */
- intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */
- intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */
- intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_mpr2 __initmv = {
- .mv_name = "mpr2",
- .mv_setup = mpr2_setup,
- .mv_init_irq = init_mpr2_IRQ,
-};
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
deleted file mode 100644
index 3de7bac0190392..00000000000000
--- a/arch/sh/boards/board-polaris.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
- *
- * Polaris-specific resource declaration
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <cpu/gpio.h>
-#include <mach-se/mach/se.h>
-
-#define BCR2 (0xFFFFFF62)
-#define WCR2 (0xFFFFFF66)
-#define AREA5_WAIT_CTRL (0x1C00)
-#define WAIT_STATES_10 (0x7)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = PA_EXT5,
- .end = PA_EXT5 + 0x1fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = IRQ0_IRQ,
- .end = IRQ0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PORT_PCDR,
- .end = PORT_PCDR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *polaris_devices[] __initdata = {
- &smsc911x_device,
- &heartbeat_device,
-};
-
-static int __init polaris_initialise(void)
-{
- u16 wcr, bcr_mask;
-
- printk(KERN_INFO "Configuring Polaris external bus\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* Configure area 5 with 2 wait states */
- wcr = __raw_readw(WCR2);
- wcr &= (~AREA5_WAIT_CTRL);
- wcr |= (WAIT_STATES_10 << 10);
- __raw_writew(wcr, WCR2);
-
- /* Configure area 5 for 32-bit access */
- bcr_mask = __raw_readw(BCR2);
- bcr_mask |= 1 << 10;
- __raw_writew(bcr_mask, BCR2);
-
- return platform_add_devices(polaris_devices,
- ARRAY_SIZE(polaris_devices));
-}
-arch_initcall(polaris_initialise);
-
-static struct ipr_data ipr_irq_table[] = {
- /* External IRQs */
- { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
- { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRC
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "sh7709-ext",
- },
-};
-
-static void __init init_polaris_irq(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
-
-static struct sh_machine_vector mv_polaris __initmv = {
- .mv_name = "Polaris",
- .mv_init_irq = init_polaris_irq,
-};
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
deleted file mode 100644
index 603a82325c65f0..00000000000000
--- a/arch/sh/boards/board-secureedge5410.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <mach/secureedge5410.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <cpu/timer.h>
-
-unsigned short secureedge5410_ioport;
-
-/*
- * EraseConfig handling functions
- */
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
- printk("SnapGear: erase switch interrupt!\n");
-
- return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
- unsigned int irq = evt2irq(0x240);
-
- printk("SnapGear: EraseConfig init\n");
-
- /* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
- printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- irq);
- else
- printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- irq);
- return 0;
-}
-device_initcall(eraseconfig_init);
-
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-static void __init init_snapgear_IRQ(void)
-{
- printk("Setup SnapGear IRQ/IPR ...\n");
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
- .mv_name = "SnapGear SecureEdge5410",
- .mv_init_irq = init_snapgear_IRQ,
-};
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
deleted file mode 100644
index 6ea85e4808512f..00000000000000
--- a/arch/sh/boards/board-sh2007.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-2007 board support.
- *
- * Copyright (C) 2003, 2004 SUGIOKA Toshinobu
- * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/io.h>
-#include <asm/machvec.h>
-#include <mach/sh2007.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-struct smsc911x_platform_config smc911x_info = {
- .flags = SMSC911X_USE_32BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct resource smsc9118_0_resources[] = {
- [0] = {
- .start = SMC0_BASE,
- .end = SMC0_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource smsc9118_1_resources[] = {
- [0] = {
- .start = SMC1_BASE,
- .end = SMC1_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x280),
- .end = evt2irq(0x280),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_0_device = {
- .name = "smsc911x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smsc9118_0_resources),
- .resource = smsc9118_0_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct platform_device smsc9118_1_device = {
- .name = "smsc911x",
- .id = 1,
- .num_resources = ARRAY_SIZE(smsc9118_1_resources),
- .resource = smsc9118_1_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct resource cf_resources[] = {
- [0] = {
- .start = CF_BASE + CF_OFFSET,
- .end = CF_BASE + CF_OFFSET + 0x0f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CF_BASE + CF_OFFSET + 0x206,
- .end = CF_BASE + CF_OFFSET + 0x20f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_device = {
- .name = "pata_platform",
- .id = 0,
- .num_resources = ARRAY_SIZE(cf_resources),
- .resource = cf_resources,
-};
-
-static struct platform_device *sh2007_devices[] __initdata = {
- &smsc9118_0_device,
- &smsc9118_1_device,
- &cf_device,
-};
-
-static int __init sh2007_io_init(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
- return 0;
-}
-subsys_initcall(sh2007_io_init);
-
-static void __init sh2007_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * Initialize the board
- */
-static void __init sh2007_setup(char **cmdline_p)
-{
- pr_info("SH-2007 Setup...");
-
- /* setup wait control registers for area 5 */
- __raw_writel(CS5BCR_D, CS5BCR);
- __raw_writel(CS5WCR_D, CS5WCR);
- __raw_writel(CS5PCR_D, CS5PCR);
-
- pr_cont(" done.\n");
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_sh2007 __initmv = {
- .mv_setup = sh2007_setup,
- .mv_name = "sh2007",
- .mv_init_irq = sh2007_init_irq,
-};
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
deleted file mode 100644
index f39c8196efdfd1..00000000000000
--- a/arch/sh/boards/board-sh7757lcr.c
+++ /dev/null
@@ -1,604 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas R0P7757LC0012RL Support.
- *
- * Copyright (C) 2009 - 2010 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/io.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <cpu/sh7757.h>
-#include <asm/heartbeat.h>
-
-static struct resource heartbeat_resource = {
- .start = 0xffec005c, /* PUDR */
- .end = 0xffec005c,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Fast Ethernet */
-#define GBECONT 0xffc10100
-#define GBECONT_RMII1 BIT(17)
-#define GBECONT_RMII0 BIT(16)
-static void sh7757_eth_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800)
- writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
- else
- writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
-}
-
-static struct resource sh_eth0_resources[] = {
- {
- .start = 0xfef00000,
- .end = 0xfef001ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth0_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth0_device = {
- .name = "sh7757-ether",
- .resource = sh_eth0_resources,
- .id = 0,
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .dev = {
- .platform_data = &sh7757_eth0_pdata,
- },
-};
-
-static struct resource sh_eth1_resources[] = {
- {
- .start = 0xfef00800,
- .end = 0xfef009ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth1_pdata = {
- .phy = 1,
- .set_mdio_gate = sh7757_eth_set_mdio_gate,
-};
-
-static struct platform_device sh7757_eth1_device = {
- .name = "sh7757-ether",
- .resource = sh_eth1_resources,
- .id = 1,
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .dev = {
- .platform_data = &sh7757_eth1_pdata,
- },
-};
-
-static void sh7757_eth_giga_set_mdio_gate(void *addr)
-{
- if (((unsigned long)addr & 0x00000fff) < 0x0800) {
- gpio_set_value(GPIO_PTT4, 1);
- writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
- } else {
- gpio_set_value(GPIO_PTT4, 0);
- writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
- }
-}
-
-static struct resource sh_eth_giga0_resources[] = {
- {
- .start = 0xfee00000,
- .end = 0xfee007ff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2960),
- .end = evt2irq(0x2960),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
- .phy = 18,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga0_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga0_resources,
- .id = 2,
- .num_resources = ARRAY_SIZE(sh_eth_giga0_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga0_pdata,
- },
-};
-
-static struct resource sh_eth_giga1_resources[] = {
- {
- .start = 0xfee00800,
- .end = 0xfee00fff,
- .flags = IORESOURCE_MEM,
- }, {
- /* TSU */
- .start = 0xfee01800,
- .end = 0xfee01fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x2980),
- .end = evt2irq(0x2980),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
- .phy = 19,
- .set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
- .phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
-};
-
-static struct platform_device sh7757_eth_giga1_device = {
- .name = "sh7757-gether",
- .resource = sh_eth_giga1_resources,
- .id = 3,
- .num_resources = ARRAY_SIZE(sh_eth_giga1_resources),
- .dev = {
- .platform_data = &sh7757_eth_giga1_pdata,
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .start = 0xffcb0000,
- .end = 0xffcb00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1c60),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = evt2irq(0x1c80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI_RX,
- .capabilities = MMC_CAP_SD_HIGHSPEED,
-};
-
-static struct resource sdhi_resources[] = {
- [0] = {
- .start = 0xffe50000,
- .end = 0xffe500ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_resources),
- .resource = sdhi_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi_info,
- },
-};
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static struct renesas_usbhs_platform_info usb0_data = {
- .platform_callback = {
- .get_id = usbhs0_get_id,
- },
- .driver_param = {
- .buswait_bwait = 5,
- }
-};
-
-static struct resource usb0_resources[] = {
- [0] = {
- .start = 0xfe450000,
- .end = 0xfe4501ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x840),
- .end = evt2irq(0x840),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb0_device = {
- .name = "renesas_usbhs",
- .id = 0,
- .dev = {
- .platform_data = &usb0_data,
- },
- .num_resources = ARRAY_SIZE(usb0_resources),
- .resource = usb0_resources,
-};
-
-static struct platform_device *sh7757lcr_devices[] __initdata = {
- &heartbeat_device,
- &sh7757_eth0_device,
- &sh7757_eth1_device,
- &sh7757_eth_giga0_device,
- &sh7757_eth_giga1_device,
- &sh_mmcif_device,
- &sdhi_device,
- &usb0_device,
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .type = "m25px64",
-};
-
-static struct spi_board_info spi_board_info[] = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &spi_flash_data,
- },
-};
-
-static int __init sh7757lcr_devices_setup(void)
-{
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* RGMII (PTA) */
- gpio_request(GPIO_FN_ET0_MDC, NULL);
- gpio_request(GPIO_FN_ET0_MDIO, NULL);
- gpio_request(GPIO_FN_ET1_MDC, NULL);
- gpio_request(GPIO_FN_ET1_MDIO, NULL);
-
- /* ONFI (PTB, PTZ) */
- gpio_request(GPIO_FN_ON_NRE, NULL);
- gpio_request(GPIO_FN_ON_NWE, NULL);
- gpio_request(GPIO_FN_ON_NWP, NULL);
- gpio_request(GPIO_FN_ON_NCE0, NULL);
- gpio_request(GPIO_FN_ON_R_B0, NULL);
- gpio_request(GPIO_FN_ON_ALE, NULL);
- gpio_request(GPIO_FN_ON_CLE, NULL);
-
- gpio_request(GPIO_FN_ON_DQ7, NULL);
- gpio_request(GPIO_FN_ON_DQ6, NULL);
- gpio_request(GPIO_FN_ON_DQ5, NULL);
- gpio_request(GPIO_FN_ON_DQ4, NULL);
- gpio_request(GPIO_FN_ON_DQ3, NULL);
- gpio_request(GPIO_FN_ON_DQ2, NULL);
- gpio_request(GPIO_FN_ON_DQ1, NULL);
- gpio_request(GPIO_FN_ON_DQ0, NULL);
-
- /* IRQ8 to 0 (PTB, PTC) */
- gpio_request(GPIO_FN_IRQ8, NULL);
- gpio_request(GPIO_FN_IRQ7, NULL);
- gpio_request(GPIO_FN_IRQ6, NULL);
- gpio_request(GPIO_FN_IRQ5, NULL);
- gpio_request(GPIO_FN_IRQ4, NULL);
- gpio_request(GPIO_FN_IRQ3, NULL);
- gpio_request(GPIO_FN_IRQ2, NULL);
- gpio_request(GPIO_FN_IRQ1, NULL);
- gpio_request(GPIO_FN_IRQ0, NULL);
-
- /* SPI0 (PTD) */
- gpio_request(GPIO_FN_SP0_MOSI, NULL);
- gpio_request(GPIO_FN_SP0_MISO, NULL);
- gpio_request(GPIO_FN_SP0_SCK, NULL);
- gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP0_SS0, NULL);
- gpio_request(GPIO_FN_SP0_SS1, NULL);
- gpio_request(GPIO_FN_SP0_SS2, NULL);
- gpio_request(GPIO_FN_SP0_SS3, NULL);
-
- /* RMII 0/1 (PTE, PTF) */
- gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII0_TXD1, NULL);
- gpio_request(GPIO_FN_RMII0_TXD0, NULL);
- gpio_request(GPIO_FN_RMII0_TXEN, NULL);
- gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII0_RXD1, NULL);
- gpio_request(GPIO_FN_RMII0_RXD0, NULL);
- gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
- gpio_request(GPIO_FN_RMII1_TXD1, NULL);
- gpio_request(GPIO_FN_RMII1_TXD0, NULL);
- gpio_request(GPIO_FN_RMII1_TXEN, NULL);
- gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
- gpio_request(GPIO_FN_RMII1_RXD1, NULL);
- gpio_request(GPIO_FN_RMII1_RXD0, NULL);
- gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
-
- /* eMMC (PTG) */
- gpio_request(GPIO_FN_MMCCLK, NULL);
- gpio_request(GPIO_FN_MMCCMD, NULL);
- gpio_request(GPIO_FN_MMCDAT7, NULL);
- gpio_request(GPIO_FN_MMCDAT6, NULL);
- gpio_request(GPIO_FN_MMCDAT5, NULL);
- gpio_request(GPIO_FN_MMCDAT4, NULL);
- gpio_request(GPIO_FN_MMCDAT3, NULL);
- gpio_request(GPIO_FN_MMCDAT2, NULL);
- gpio_request(GPIO_FN_MMCDAT1, NULL);
- gpio_request(GPIO_FN_MMCDAT0, NULL);
-
- /* LPC (PTG, PTH, PTQ, PTU) */
- gpio_request(GPIO_FN_SERIRQ, NULL);
- gpio_request(GPIO_FN_LPCPD, NULL);
- gpio_request(GPIO_FN_LDRQ, NULL);
- gpio_request(GPIO_FN_WP, NULL);
- gpio_request(GPIO_FN_FMS0, NULL);
- gpio_request(GPIO_FN_LAD3, NULL);
- gpio_request(GPIO_FN_LAD2, NULL);
- gpio_request(GPIO_FN_LAD1, NULL);
- gpio_request(GPIO_FN_LAD0, NULL);
- gpio_request(GPIO_FN_LFRAME, NULL);
- gpio_request(GPIO_FN_LRESET, NULL);
- gpio_request(GPIO_FN_LCLK, NULL);
- gpio_request(GPIO_FN_LGPIO7, NULL);
- gpio_request(GPIO_FN_LGPIO6, NULL);
- gpio_request(GPIO_FN_LGPIO5, NULL);
- gpio_request(GPIO_FN_LGPIO4, NULL);
-
- /* SPI1 (PTH) */
- gpio_request(GPIO_FN_SP1_MOSI, NULL);
- gpio_request(GPIO_FN_SP1_MISO, NULL);
- gpio_request(GPIO_FN_SP1_SCK, NULL);
- gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
- gpio_request(GPIO_FN_SP1_SS0, NULL);
- gpio_request(GPIO_FN_SP1_SS1, NULL);
-
- /* SDHI (PTI) */
- gpio_request(GPIO_FN_SD_WP, NULL);
- gpio_request(GPIO_FN_SD_CD, NULL);
- gpio_request(GPIO_FN_SD_CLK, NULL);
- gpio_request(GPIO_FN_SD_CMD, NULL);
- gpio_request(GPIO_FN_SD_D3, NULL);
- gpio_request(GPIO_FN_SD_D2, NULL);
- gpio_request(GPIO_FN_SD_D1, NULL);
- gpio_request(GPIO_FN_SD_D0, NULL);
-
- /* SCIF3/4 (PTJ, PTW) */
- gpio_request(GPIO_FN_RTS3, NULL);
- gpio_request(GPIO_FN_CTS3, NULL);
- gpio_request(GPIO_FN_TXD3, NULL);
- gpio_request(GPIO_FN_RXD3, NULL);
- gpio_request(GPIO_FN_RTS4, NULL);
- gpio_request(GPIO_FN_RXD4, NULL);
- gpio_request(GPIO_FN_TXD4, NULL);
- gpio_request(GPIO_FN_CTS4, NULL);
-
- /* SERMUX (PTK, PTL, PTO, PTV) */
- gpio_request(GPIO_FN_COM2_TXD, NULL);
- gpio_request(GPIO_FN_COM2_RXD, NULL);
- gpio_request(GPIO_FN_COM2_RTS, NULL);
- gpio_request(GPIO_FN_COM2_CTS, NULL);
- gpio_request(GPIO_FN_COM2_DTR, NULL);
- gpio_request(GPIO_FN_COM2_DSR, NULL);
- gpio_request(GPIO_FN_COM2_DCD, NULL);
- gpio_request(GPIO_FN_COM2_RI, NULL);
- gpio_request(GPIO_FN_RAC_RXD, NULL);
- gpio_request(GPIO_FN_RAC_RTS, NULL);
- gpio_request(GPIO_FN_RAC_CTS, NULL);
- gpio_request(GPIO_FN_RAC_DTR, NULL);
- gpio_request(GPIO_FN_RAC_DSR, NULL);
- gpio_request(GPIO_FN_RAC_DCD, NULL);
- gpio_request(GPIO_FN_RAC_TXD, NULL);
- gpio_request(GPIO_FN_COM1_TXD, NULL);
- gpio_request(GPIO_FN_COM1_RXD, NULL);
- gpio_request(GPIO_FN_COM1_RTS, NULL);
- gpio_request(GPIO_FN_COM1_CTS, NULL);
-
- writeb(0x10, 0xfe470000); /* SMR0: SerMux mode 0 */
-
- /* IIC (PTM, PTR, PTS) */
- gpio_request(GPIO_FN_SDA7, NULL);
- gpio_request(GPIO_FN_SCL7, NULL);
- gpio_request(GPIO_FN_SDA6, NULL);
- gpio_request(GPIO_FN_SCL6, NULL);
- gpio_request(GPIO_FN_SDA5, NULL);
- gpio_request(GPIO_FN_SCL5, NULL);
- gpio_request(GPIO_FN_SDA4, NULL);
- gpio_request(GPIO_FN_SCL4, NULL);
- gpio_request(GPIO_FN_SDA3, NULL);
- gpio_request(GPIO_FN_SCL3, NULL);
- gpio_request(GPIO_FN_SDA2, NULL);
- gpio_request(GPIO_FN_SCL2, NULL);
- gpio_request(GPIO_FN_SDA1, NULL);
- gpio_request(GPIO_FN_SCL1, NULL);
- gpio_request(GPIO_FN_SDA0, NULL);
- gpio_request(GPIO_FN_SCL0, NULL);
-
- /* USB (PTN) */
- gpio_request(GPIO_FN_VBUS_EN, NULL);
- gpio_request(GPIO_FN_VBUS_OC, NULL);
-
- /* SGPIO1/0 (PTN, PTO) */
- gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO1_DI, NULL);
- gpio_request(GPIO_FN_SGPIO1_DO, NULL);
- gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
- gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
- gpio_request(GPIO_FN_SGPIO0_DI, NULL);
- gpio_request(GPIO_FN_SGPIO0_DO, NULL);
-
- /* WDT (PTN) */
- gpio_request(GPIO_FN_SUB_CLKIN, NULL);
-
- /* System (PTT) */
- gpio_request(GPIO_FN_STATUS1, NULL);
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* PWMX (PTT) */
- gpio_request(GPIO_FN_PWMX1, NULL);
- gpio_request(GPIO_FN_PWMX0, NULL);
-
- /* R-SPI (PTV) */
- gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
- gpio_request(GPIO_FN_R_SPI_MISO, NULL);
- gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
- gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
-
- /* EVC (PTV, PTW) */
- gpio_request(GPIO_FN_EVENT7, NULL);
- gpio_request(GPIO_FN_EVENT6, NULL);
- gpio_request(GPIO_FN_EVENT5, NULL);
- gpio_request(GPIO_FN_EVENT4, NULL);
- gpio_request(GPIO_FN_EVENT3, NULL);
- gpio_request(GPIO_FN_EVENT2, NULL);
- gpio_request(GPIO_FN_EVENT1, NULL);
- gpio_request(GPIO_FN_EVENT0, NULL);
-
- /* LED for heartbeat */
- gpio_request(GPIO_PTU3, NULL);
- gpio_direction_output(GPIO_PTU3, 1);
- gpio_request(GPIO_PTU2, NULL);
- gpio_direction_output(GPIO_PTU2, 1);
- gpio_request(GPIO_PTU1, NULL);
- gpio_direction_output(GPIO_PTU1, 1);
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* control for MDIO of Gigabit Ethernet */
- gpio_request(GPIO_PTT4, NULL);
- gpio_direction_output(GPIO_PTT4, 1);
-
- /* control for eMMC */
- gpio_request(GPIO_PTT7, NULL); /* eMMC_RST# */
- gpio_direction_output(GPIO_PTT7, 0);
- gpio_request(GPIO_PTT6, NULL); /* eMMC_INDEX# */
- gpio_direction_output(GPIO_PTT6, 0);
- gpio_request(GPIO_PTT5, NULL); /* eMMC_PRST# */
- gpio_direction_output(GPIO_PTT5, 1);
-
- /* register SPI device information */
- spi_register_board_info(spi_board_info,
- ARRAY_SIZE(spi_board_info));
-
- /* General platform */
- return platform_add_devices(sh7757lcr_devices,
- ARRAY_SIZE(sh7757lcr_devices));
-}
-arch_initcall(sh7757lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7757lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-/* Initialize the board */
-static void __init sh7757lcr_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
-}
-
-static int sh7757lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S3 (Low active).
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN0; /* Clock Mode: 1 */
-
- return value;
-}
-
-/* The Machine Vector */
-static struct sh_machine_vector mv_sh7757lcr __initmv = {
- .mv_name = "SH7757LCR",
- .mv_setup = sh7757lcr_setup,
- .mv_init_irq = init_sh7757lcr_IRQ,
- .mv_mode_pins = sh7757lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
deleted file mode 100644
index 77dad1e511b465..00000000000000
--- a/arch/sh/boards/board-sh7785lcr.c
+++ /dev/null
@@ -1,384 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. R0P7785LC0011RL Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pca-platform.h>
-#include <linux/i2c-algo-pca.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/gpio/machine.h>
-#include <mach/sh7785lcr.h>
-#include <cpu/sh7785.h>
-#include <asm/heartbeat.h>
-#include <asm/clock.h>
-#include <asm/bl_bit.h>
-
-/*
- * NOTE: This board has 2 physical memory maps.
- * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
- */
-static struct resource heartbeat_resource = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = R8A66597_ADDR,
- .end = R8A66597_ADDR + R8A66597_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x240),
- .end = evt2irq(0x240),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = SM107_MEM_ADDR,
- .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SM107_REG_ADDR,
- .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0x340),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode_crt = {
- .pixclock = 35714, /* 28MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct fb_videomode sm501_default_mode_pnl = {
- .pixclock = 40000, /* 25MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 2,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = 0,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_pnl,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT |
- SM501FB_FLAG_PANEL_NO_VBIASEN,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_crt,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = 0,
- .mclk = 84 * 1000000,
- .m1xclk = 112 * 1000000,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct resource i2c_proto_resources[] = {
- [0] = {
- .start = PCA9564_PROTO_32BIT_ADDR,
- .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c_resources[] = {
- [0] = {
- .start = PCA9564_ADDR,
- .end = PCA9564_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = evt2irq(0x380),
- .end = evt2irq(0x380),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct gpiod_lookup_table i2c_gpio_table = {
- .dev_id = "i2c.0",
- .table = {
- GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
- .i2c_clock_speed = I2C_PCA_CON_330kHz,
- .timeout = HZ,
-};
-
-static struct platform_device i2c_device = {
- .name = "i2c-pca-platform",
- .id = -1,
- .dev = {
- .platform_data = &i2c_platform_data,
- },
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-static struct platform_device *sh7785lcr_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &r8a66597_usb_host_device,
- &sm501_device,
- &i2c_device,
-};
-
-static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static int __init sh7785lcr_devices_setup(void)
-{
- i2c_register_board_info(0, sh7785lcr_i2c_devices,
- ARRAY_SIZE(sh7785lcr_i2c_devices));
-
- if (mach_is_sh7785lcr_pt()) {
- i2c_device.resource = i2c_proto_resources;
- i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
- }
-
- gpiod_add_lookup_table(&i2c_gpio_table);
- return platform_add_devices(sh7785lcr_devices,
- ARRAY_SIZE(sh7785lcr_devices));
-}
-device_initcall(sh7785lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7785lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-static int sh7785lcr_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-static void sh7785lcr_power_off(void)
-{
- unsigned char *p;
-
- p = ioremap(PLD_POFCR, PLD_POFCR + 1);
- if (!p) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
- *p = 0x01;
- iounmap(p);
- set_bl_bit();
- while (1)
- cpu_relax();
-}
-
-/* Initialize the board */
-static void __init sh7785lcr_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
-
- printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
-
- pm_power_off = sh7785lcr_power_off;
-
- /* sm501 DRAM configuration */
- sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL);
- if (!sm501_reg) {
- printk(KERN_ERR "%s: ioremap error.\n", __func__);
- return;
- }
-
- writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
- iounmap(sm501_reg);
-}
-
-/* Return the board specific boot mode pin configuration */
-static int sh7785lcr_mode_pins(void)
-{
- int value = 0;
-
- /* These are the factory default settings of S1 and S2.
- * If you change these dip switches then you will need to
- * adjust the values below as well.
- */
- value |= MODE_PIN4; /* Clock Mode 16 */
- value |= MODE_PIN5; /* 32-bit Area0 bus width */
- value |= MODE_PIN6; /* 32-bit Area0 bus width */
- value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
- value |= MODE_PIN8; /* Little Endian */
- value |= MODE_PIN9; /* Master Mode */
- value |= MODE_PIN14; /* No PLL step-up */
-
- return value;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7785lcr __initmv = {
- .mv_name = "SH7785LCR",
- .mv_setup = sh7785lcr_setup,
- .mv_clk_init = sh7785lcr_clk_init,
- .mv_init_irq = init_sh7785lcr_IRQ,
- .mv_mode_pins = sh7785lcr_mode_pins,
-};
-
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
deleted file mode 100644
index 83296c0b75c45d..00000000000000
--- a/arch/sh/boards/board-shmin.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/shmin/setup.c
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * SHMIN Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/shmin.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-#define PFC_PHCR 0xa400010eUL
-#define INTC_ICR1 0xa4000010UL
-
-static void __init init_shmin_irq(void)
-{
- __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static void __init shmin_setup(char **cmdline_p)
-{
- __set_io_port_base(SHMIN_IO_BASE);
-}
-
-static struct sh_machine_vector mv_shmin __initmv = {
- .mv_name = "SHMIN",
- .mv_setup = shmin_setup,
- .mv_init_irq = init_shmin_irq,
-};
diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c
deleted file mode 100644
index 074a848d8b564d..00000000000000
--- a/arch/sh/boards/board-titan.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/titan/setup.c - Setup for Titan
- *
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static void __init init_titan_irq(void)
-{
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct sh_machine_vector mv_titan __initmv = {
- .mv_name = "Titan",
- .mv_init_irq = init_titan_irq,
-};
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
deleted file mode 100644
index dad2b3b40735cb..00000000000000
--- a/arch/sh/boards/board-urquell.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Corp. SH7786 Urquell Support.
- *
- * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * Based on board-sh7785lcr.c
- * Copyright (C) 2008 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/sh_intc.h>
-#include <mach/urquell.h>
-#include <cpu/sh7786.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/smp-ops.h>
-
-/*
- * bit 1234 5678
- *----------------------------
- * SW1 0101 0010 -> Pck 33MHz version
- * (1101 0010) Pck 66MHz version
- * SW2 0x1x xxxx -> little endian
- * 29bit mode
- * SW47 0001 1000 -> CS0 : on-board flash
- * CS1 : SRAM, registers, LAN, PCMCIA
- * 38400 bps for SCIF1
- *
- * Address
- * 0x00000000 - 0x04000000 (CS0) Nor Flash
- * 0x04000000 - 0x04200000 (CS1) SRAM
- * 0x05000000 - 0x05800000 (CS1) on board register
- * 0x05800000 - 0x06000000 (CS1) LAN91C111
- * 0x06000000 - 0x06400000 (CS1) PCMCIA
- * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
- * 0x10000000 - 0x14000000 (CS4) PCIe
- * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
- * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
- * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
- * 0x1C000000 - (CS7) SH7786 Control register
- */
-
-/* HeartBeat */
-static struct resource heartbeat_resource = {
- .start = BOARDREG(SLEDR),
- .end = BOARDREG(SLEDR),
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x05800300,
- .end = 0x0580030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x360),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* Nor Flash */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct platform_device *urquell_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &nor_flash_device,
-};
-
-static int __init urquell_devices_setup(void)
-{
- /* USB */
- gpio_request(GPIO_FN_USB_OVC0, NULL);
- gpio_request(GPIO_FN_USB_PENC0, NULL);
-
- /* enable LAN */
- __raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
- UBOARDREG(IRL2MSKR));
-
- return platform_add_devices(urquell_devices,
- ARRAY_SIZE(urquell_devices));
-}
-device_initcall(urquell_devices_setup);
-
-static void urquell_power_off(void)
-{
- __raw_writew(0xa5a5, UBOARDREG(SRSTR));
-}
-
-static void __init urquell_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
-
-static int urquell_mode_pins(void)
-{
- return __raw_readw(UBOARDREG(MDSWMR));
-}
-
-static int urquell_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- return ret;
-}
-
-/* Initialize the board */
-static void __init urquell_setup(char **cmdline_p)
-{
- printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
-
- pm_power_off = urquell_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_urquell __initmv = {
- .mv_name = "Urquell",
- .mv_setup = urquell_setup,
- .mv_init_irq = urquell_init_irq,
- .mv_mode_pins = urquell_mode_pins,
- .mv_clk_init = urquell_clk_init,
-};
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
deleted file mode 100644
index dba5d0c202615a..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
deleted file mode 100644
index 541c82cc30b112..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * AP325RXA sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ap325rxa_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(ap325rxa_sdram_enter_end)
-
- .balign 4
-ENTRY(ap325rxa_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
deleted file mode 100644
index c77b5f00a66a3d..00000000000000
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ /dev/null
@@ -1,573 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas - AP-325RXA
- * (Compatible with Algo System ., LTD. - AP-320A)
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Author : Yusuke Goda <goda.yuske@renesas.com>
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7723.h>
-
-#include <linux/dma-map-ops.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct resource smsc9118_resources[] = {
- [0] = {
- .start = 0xb6080000,
- .end = 0xb60fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x660),
- .end = evt2irq(0x660),
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc9118_resources),
- .resource = smsc9118_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-/*
- * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
- * If this area erased, this board can not boot.
- */
-static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area0",
- .offset = MTDPART_OFS_APPEND,
- .size = ((7 * 1024 * 1024) + (512 * 1024)),
- }, {
- .name = "CPLD-Data",
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- .size = (1024 * 128 * 2),
- }, {
- .name = "free-area1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data ap325rxa_nor_flash_data = {
- .width = 2,
- .parts = ap325rxa_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
-};
-
-static struct resource ap325rxa_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device ap325rxa_nor_flash_device = {
- .name = "physmap-flash",
- .resource = ap325rxa_nor_flash_resources,
- .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
- .dev = {
- .platform_data = &ap325rxa_nor_flash_data,
- },
-};
-
-static struct mtd_partition nand_partition_info[] = {
- {
- .name = "nand_data",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct resource nand_flash_resources[] = {
- [0] = {
- .start = 0xa4530000,
- .end = 0xa45300ff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
- .parts = nand_partition_info,
- .nr_parts = ARRAY_SIZE(nand_partition_info),
- .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E,
- .has_hwecc = 1,
-};
-
-static struct platform_device nand_flash_device = {
- .name = "sh_flctl",
- .resource = nand_flash_resources,
- .num_resources = ARRAY_SIZE(nand_flash_resources),
- .dev = {
- .platform_data = &nand_flash_data,
- },
-};
-
-#define FPGA_LCDREG 0xB4100180
-#define FPGA_BKLREG 0xB4100212
-#define FPGA_LCDREG_VAL 0x0018
-#define PORT_MSELCRB 0xA4050182
-#define PORT_HIZCRC 0xA405015C
-#define PORT_DRVCRA 0xA405018A
-#define PORT_DRVCRB 0xA405018C
-
-static int ap320_wvga_set_brightness(int brightness)
-{
- if (brightness) {
- gpio_set_value(GPIO_PTS3, 0);
- __raw_writew(0x100, FPGA_BKLREG);
- } else {
- __raw_writew(0, FPGA_BKLREG);
- gpio_set_value(GPIO_PTS3, 1);
- }
-
- return 0;
-}
-
-static void ap320_wvga_power_on(void)
-{
- msleep(100);
-
- /* ASD AP-320/325 LCD ON */
- __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-}
-
-static void ap320_wvga_power_off(void)
-{
- /* ASD AP-320/325 LCD OFF */
- __raw_writew(0, FPGA_LCDREG);
-}
-
-static const struct fb_videomode ap325rxa_lcdc_modes[] = {
- {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 32,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB18,
- .clock_divider = 1,
- .lcd_modes = ap325rxa_lcdc_modes,
- .num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
- .panel_cfg = {
- .width = 152, /* 7.0 inch */
- .height = 91,
- .display_on = ap320_wvga_power_on,
- .display_off = ap320_wvga_power_off,
- },
- .bl_info = {
- .name = "sh_mobile_lcdc_bl",
- .max_brightness = 1,
- .set_brightness = ap320_wvga_set_brightness,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7723_pfc", GPIO_PTZ5, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = ov7725 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- },
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ap325rxa_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn3_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi0_cn3_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn3_device = {
- .name = "sh_mobile_sdhi",
- .id = 0, /* "sdhi0" clock */
- .num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
- .resource = sdhi0_cn3_resources,
- .dev = {
- .platform_data = &sdhi0_cn3_data,
- },
-};
-
-static struct resource sdhi1_cn7_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sdhi1_cn7_data = {
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 1, /* "sdhi1" clock */
- .num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
- .resource = sdhi1_cn7_resources,
- .dev = {
- .platform_data = &sdhi1_cn7_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
- .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
-};
-
-static struct i2c_board_info ap325rxa_i2c_devices[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
-};
-
-static struct platform_device *ap325rxa_devices[] __initdata = {
- &smsc9118_device,
- &ap325rxa_nor_flash_device,
- &lcdc_device,
- &nand_flash_device,
- &sdhi0_cn3_device,
- &sdhi1_cn7_device,
-};
-
-extern char ap325rxa_sdram_enter_start;
-extern char ap325rxa_sdram_enter_end;
-extern char ap325rxa_sdram_leave_start;
-extern char ap325rxa_sdram_leave_end;
-
-static int __init ap325rxa_devices_setup(void)
-{
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &ap325rxa_sdram_enter_start,
- &ap325rxa_sdram_enter_end,
- &ap325rxa_sdram_leave_start,
- &ap325rxa_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
- regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* LD3 and LD4 LEDs */
- gpio_request(GPIO_PTX5, NULL); /* RUN */
- gpio_direction_output(GPIO_PTX5, 1);
- gpio_export(GPIO_PTX5, 0);
-
- gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
- gpio_direction_output(GPIO_PTX4, 0);
- gpio_export(GPIO_PTX4, 0);
-
- /* SW1 input */
- gpio_request(GPIO_PTF7, NULL); /* MODE */
- gpio_direction_input(GPIO_PTF7);
- gpio_export(GPIO_PTF7, 0);
-
- /* LCDC */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-
- /* LCD backlight */
- gpio_request(GPIO_PTS3, NULL);
- gpio_direction_output(GPIO_PTS3, 1);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- gpio_request(GPIO_PTZ7, NULL);
- gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
- gpio_request(GPIO_PTZ6, NULL);
- gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
- gpio_request(GPIO_PTZ5, NULL);
- gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
- gpio_request(GPIO_PTZ4, NULL);
- gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
-
- __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
-
- /* FLCTL */
- gpio_request(GPIO_FN_FCE, NULL);
- gpio_request(GPIO_FN_NAF7, NULL);
- gpio_request(GPIO_FN_NAF6, NULL);
- gpio_request(GPIO_FN_NAF5, NULL);
- gpio_request(GPIO_FN_NAF4, NULL);
- gpio_request(GPIO_FN_NAF3, NULL);
- gpio_request(GPIO_FN_NAF2, NULL);
- gpio_request(GPIO_FN_NAF1, NULL);
- gpio_request(GPIO_FN_NAF0, NULL);
- gpio_request(GPIO_FN_FCDE, NULL);
- gpio_request(GPIO_FN_FOE, NULL);
- gpio_request(GPIO_FN_FSC, NULL);
- gpio_request(GPIO_FN_FWE, NULL);
- gpio_request(GPIO_FN_FRB, NULL);
-
- __raw_writew(0, PORT_HIZCRC);
- __raw_writew(0xFFFF, PORT_DRVCRA);
- __raw_writew(0xFFFF, PORT_DRVCRB);
-
- /* SDHI0 - CN3 - SD CARD */
- gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
-
- /* SDHI1 - CN7 - MICRO SD CARD */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register RSTB gpio for ov7725 camera sensor. */
- gpiod_add_lookup_table(&ov7725_gpios);
-
- i2c_register_board_info(0, ap325rxa_i2c_devices,
- ARRAY_SIZE(ap325rxa_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&ap325rxa_ceu_device.dev);
- dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&ap325rxa_ceu_device);
-
- return platform_add_devices(ap325rxa_devices,
- ARRAY_SIZE(ap325rxa_devices));
-}
-arch_initcall(ap325rxa_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int ap325rxa_mode_pins(void)
-{
- /* MD0=0, MD1=0, MD2=0: Clock Mode 0
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=1: Test Mode Disabled
- */
- return MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init ap325rxa_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ap325rxa __initmv = {
- .mv_name = "AP-325RXA",
- .mv_mode_pins = ap325rxa_mode_pins,
- .mv_mem_reserve = ap325rxa_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
deleted file mode 100644
index 37b2452206aa21..00000000000000
--- a/arch/sh/boards/mach-dreamcast/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Sega Dreamcast specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
deleted file mode 100644
index cc06e4cdb4cdf9..00000000000000
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <mach/sysasic.h>
-
-/*
- * Dreamcast System ASIC Hardware Events -
- *
- * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
- * hardware events from system peripherals and triggering an SH7750 IRQ.
- * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
- * set in the Event Mask Registers (EMRs). When a hardware event is
- * triggered, its corresponding bit in the Event Status Registers (ESRs)
- * is set, and that bit should be rewritten to the ESR to acknowledge that
- * event.
- *
- * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908. Event
- * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
- * There are three groups of EMRs that parallel the ESRs. Each EMR group
- * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
- * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
- * triggers IRQ 9.
- *
- * In the kernel, these events are mapped to virtual IRQs so that drivers can
- * respond to them as they would a normal interrupt. In order to keep this
- * mapping simple, the events are mapped as:
- *
- * 6900/6910 - Events 0-31, IRQ 13
- * 6904/6924 - Events 32-63, IRQ 11
- * 6908/6938 - Events 64-95, IRQ 9
- *
- */
-
-#define ESR_BASE 0x005f6900 /* Base event status register */
-#define EMR_BASE 0x005f6910 /* Base event mask register */
-
-/*
- * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
- * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
- */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit position within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/*
- * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
- * (logically mapped to the corresponding bit for the hardware event).
- */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask &= ~(1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
-
- mask = inl(emr);
- mask |= (1 << EVENT_BIT(irq));
- outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void mask_ack_systemasic_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
- disable_systemasic_irq(data);
- outl((1 << EVENT_BIT(irq)), esr);
-}
-
-struct irq_chip systemasic_int = {
- .name = "System ASIC",
- .irq_mask = disable_systemasic_irq,
- .irq_mask_ack = mask_ack_systemasic_irq,
- .irq_unmask = enable_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
- __u32 emr, esr, status, level;
- __u32 j, bit;
-
- switch (irq) {
- case 13:
- level = 0;
- break;
- case 11:
- level = 1;
- break;
- case 9:
- level = 2;
- break;
- default:
- return irq;
- }
- emr = EMR_BASE + (level << 4) + (level << 2);
- esr = ESR_BASE + (level << 2);
-
- /* Mask the ESR to filter any spurious, unwanted interrupts */
- status = inl(esr);
- status &= inl(emr);
-
- /* Now scan and find the first set bit as the event to map */
- for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
- if (status & bit) {
- irq = HW_EVENT_IRQ_BASE + j + (level << 5);
- return irq;
- }
- }
-
- /* Not reached */
- return irq;
-}
-
-void systemasic_irq_init(void)
-{
- int irq_base, i;
-
- irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
- HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs\n", __func__);
- return;
- }
-
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
-}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
deleted file mode 100644
index 7873cd27e4e008..00000000000000
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- */
-
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
- seconds) to get the standard Unix Epoch when getting the time, and add
- 20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
- registers.*/
-#define AICA_RTC_SECS_H 0xa0710000
-#define AICA_RTC_SECS_L 0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @dev: the RTC device (ignored)
- * @tm: pointer to resulting RTC time structure
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-static int aica_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t t;
-
- do {
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- /* normalize to 1970..2106 time range */
- t = (u32)(val1 - TWENTY_YEARS);
-
- rtc_time64_to_tm(t, tm);
-
- return 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @dev: the RTC device (ignored)
- * @tm: pointer to new RTC time structure
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-static int aica_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned long val1, val2;
- time64_t secs = rtc_tm_to_time64(tm);
- u32 adj = secs + TWENTY_YEARS;
-
- do {
- __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
-
- val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
-
- val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- } while (val1 != val2);
-
- return 0;
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = aica_rtc_gettimeofday,
- .set_time = aica_rtc_settimeofday,
-};
-
-static int __init aica_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(aica_time_init);
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
deleted file mode 100644
index 2d966c1c2cc188..00000000000000
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * This file originally bore the message (with enclosed-$):
- * Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- * SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <mach/sysasic.h>
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
- .mv_name = "Sega Dreamcast",
- .mv_setup = dreamcast_setup,
- .mv_irq_demux = systemasic_irq_demux,
- .mv_init_irq = systemasic_irq_init,
-};
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
deleted file mode 100644
index d78d4904ddee32..00000000000000
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the R0P7724LC0011/21RL (EcoVec)
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-obj-y := setup.o sdram.o
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
deleted file mode 100644
index d2f269169abb94..00000000000000
--- a/arch/sh/boards/mach-ecovec24/sdram.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Ecovec24 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ecovec24_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ecovec24_sdram_enter_end)
-
- .balign 4
-ENTRY(ecovec24_sdram_leave_start)
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- /* DBSC: put memory in auto-refresh mode */
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-
-ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
deleted file mode 100644
index 674da7ebd8b7f5..00000000000000
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ /dev/null
@@ -1,1521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/suspend.h>
-#include <cpu/sh7724.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/sh_mmcif.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/platform_data/tsc2007.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/spi/sh_msiof.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/mt9t112.h>
-#include <media/i2c/tw9910.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * Address Interface BusWidth
- *-----------------------------------------
- * 0x0000_0000 uboot 16bit
- * 0x0004_0000 Linux romImage 16bit
- * 0x0014_0000 MTD for Linux 16bit
- * 0x0400_0000 Internal I/O 16/32bit
- * 0x0800_0000 DRAM 32bit
- * 0x1800_0000 MFI 16bit
- */
-
-/* SWITCH
- *------------------------------
- * DS2[1] = FlashROM write protect ON : write protect
- * OFF : No write protect
- * DS2[2] = RMII / TS, SCIF ON : RMII
- * OFF : TS, SCIF3
- * DS2[3] = Camera / Video ON : Camera
- * OFF : NTSC/PAL (IN)
- * DS2[5] = NTSC_OUT Clock ON : On board OSC
- * OFF : SH7724 DV_CLK
- * DS2[6-7] = MMC / SD ON-OFF : SD
- * OFF-ON : MMC
- */
-
-/*
- * FSI - DA7210
- *
- * it needs amixer settings for playing
- *
- * amixer set 'HeadPhone' 80
- * amixer set 'Out Mixer Left DAC Left' on
- * amixer set 'Out Mixer Right DAC Right' on
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/* Heartbeat */
-static unsigned char led_pos[] = { 0, 1, 2, 3 };
-
-static struct heartbeat_data heartbeat_data = {
- .nr_bits = 4,
- .bit_pos = led_pos,
-};
-
-static struct resource heartbeat_resource = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "boot loader",
- .offset = 0,
- .size = (5 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8700 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .ether_link_active_low = 1
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-/* USB0 host */
-static void usb0_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB4, power);
-}
-
-static struct r8a66597_platdata usb0_host_data = {
- .on_chip = 1,
- .port_power = usb0_port_power,
-};
-
-static struct resource usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(usb0_host_resources),
- .resource = usb0_host_resources,
-};
-
-/* USB1 host/function */
-static void usb1_port_power(int port, int power)
-{
- gpio_set_value(GPIO_PTB5, power);
-}
-
-static struct r8a66597_platdata usb1_common_data = {
- .on_chip = 1,
- .port_power = usb1_port_power,
-};
-
-static struct resource usb1_common_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb1_common_device = {
- /* .name will be added in arch_setup */
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_common_data,
- },
- .num_resources = ARRAY_SIZE(usb1_common_resources),
- .resource = usb1_common_resources,
-};
-
-/*
- * USBHS
- */
-static int usbhs_get_id(struct platform_device *pdev)
-{
- return gpio_get_value(GPIO_PTB3);
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
- /* enable vbus if HOST */
- if (!gpio_get_value(GPIO_PTB3))
- gpio_set_value(GPIO_PTB5, 1);
-
- return 0;
-}
-
-static struct renesas_usbhs_platform_info usbhs_info = {
- .platform_callback = {
- .get_id = usbhs_get_id,
- .phy_reset = usbhs_phy_reset,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .detection_delay = 5,
- .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
- .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
- .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
- .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
- },
-};
-
-static struct resource usbhs_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs_device = {
- .name = "renesas_usbhs",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbhs_info,
- },
- .num_resources = ARRAY_SIZE(usbhs_resources),
- .resource = usbhs_resources,
-};
-
-/* LCDC and backlight */
-static const struct fb_videomode ecovec_lcd_modes[] = {
- {
- .name = "Panel",
- .xres = 800,
- .yres = 480,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 70,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static const struct fb_videomode ecovec_dvi_modes[] = {
- {
- .name = "DVI",
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0, /* hsync and vsync are active low */
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .ch[0] = {
- .interface_type = RGB18,
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-static struct gpiod_lookup_table gpio_backlight_lookup = {
- .dev_id = "gpio-backlight.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct property_entry gpio_backlight_props[] = {
- PROPERTY_ENTRY_BOOL("default-on"),
- { }
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
-};
-
-static const struct platform_device_info gpio_backlight_device_info = {
- .name = "gpio-backlight",
- .data = &gpio_backlight_data,
- .size_data = sizeof(gpio_backlight_data),
- .properties = gpio_backlight_props,
-};
-
-static struct platform_device *gpio_backlight_device;
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x3c,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = mt9t112 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x3c,
- },
- },
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* ceu.1 */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* Power up/down GPIOs for camera devices and video decoder */
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTU2, "pdn", GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_0_gpios = {
- .dev_id = "0-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA3, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct gpiod_lookup_table mt9t112_1_gpios = {
- .dev_id = "1-003c",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTA4, "standby",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* I2C device */
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct mt9t112_platform_data mt9t112_0_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct mt9t112_platform_data mt9t112_1_pdata = {
- .flags = MT9T112_FLAG_PCLK_RISING_EDGE,
- .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
-};
-
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("da7210", 0x1a),
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
- {
- /* 1st camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_0_pdata,
- },
-};
-
-static struct i2c_board_info i2c1_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
- {
- I2C_BOARD_INFO("lis3lv02d", 0x1c),
- .irq = evt2irq(0x620),
- },
- {
- /* 2nd camera */
- I2C_BOARD_INFO("mt9t112", 0x3c),
- .platform_data = &mt9t112_1_pdata,
- },
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .kycr2_delay = 100,
- .keycodes = { KEY_1, 0, 0, 0, 0,
- KEY_2, 0, 0, 0, 0,
- KEY_3, 0, 0, 0, 0,
- KEY_4, 0, 0, 0, 0,
- KEY_5, 0, 0, 0, 0,
- KEY_6, 0, 0, 0, 0, },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* keysc0 clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* TouchScreen */
-#define IRQ0 evt2irq(0x600)
-
-static int ts_get_pendown_state(struct device *dev)
-{
- int val = 0;
- gpio_free(GPIO_FN_INTC_IRQ0);
- gpio_request(GPIO_PTZ0, NULL);
- gpio_direction_input(GPIO_PTZ0);
-
- val = gpio_get_value(GPIO_PTZ0);
-
- gpio_free(GPIO_PTZ0);
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
-
- return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = ts_get_pendown_state,
- .init_platform_hw = ts_init,
-};
-
-static struct i2c_board_info ts_i2c_clients = {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
- .platform_data = &tsc2007_info,
- .irq = IRQ0,
-};
-
-static struct regulator_consumer_supply cn12_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn12_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
- .consumer_supplies = cn12_power_consumers,
-};
-
-static struct fixed_voltage_config cn12_power_info = {
- .supply_name = "CN12 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &cn12_power_init_data,
-};
-
-static struct platform_device cn12_power = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &cn12_power_info,
- },
-};
-
-static struct gpiod_lookup_table cn12_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- /* Offset 7 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
-/* SDHI0 */
-static struct regulator_consumer_supply sdhi0_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data sdhi0_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
- .consumer_supplies = sdhi0_power_consumers,
-};
-
-static struct fixed_voltage_config sdhi0_power_info = {
- .supply_name = "CN11 SD/MMC Vdd",
- .microvolts = 3300000,
- .init_data = &sdhi0_power_init_data,
-};
-
-static struct platform_device sdhi0_power = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &sdhi0_power_info,
- },
-};
-
-static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
- .dev_id = "reg-fixed-voltage.1",
- .table = {
- /* Offset 6 on port B */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct gpiod_lookup_table sdhi0_gpio_table = {
- .dev_id = "sh_mobile_sdhi.0",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTY7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct tmio_mmc_data sdhi0_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct resource sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_NEEDS_POLL,
-};
-
-static struct gpiod_lookup_table sdhi1_gpio_table = {
- .dev_id = "sh_mobile_sdhi.1",
- .table = {
- /* Card detect */
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTW7, "cd", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct resource sdhi1_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
- .id = 1,
- .dev = {
- .platform_data = &sdhi1_info,
- },
-};
-#endif /* CONFIG_MMC_SH_MMCIF */
-
-#else
-
-/* MMC SPI */
-static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
-{
- gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
-}
-
-static struct mmc_spi_platform_data mmc_spi_info = {
- .caps = MMC_CAP_NEEDS_POLL,
- .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
- .setpower = mmc_spi_setpower,
-};
-
-static struct gpiod_lookup_table mmc_spi_gpio_table = {
- .dev_id = "mmc_spi.0", /* device "mmc_spi" @ CS0 */
- .table = {
- /* Card detect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY7, NULL, 0,
- GPIO_ACTIVE_LOW),
- /* Write protect */
- GPIO_LOOKUP_IDX("sh7724_pfc", GPIO_PTY6, NULL, 1,
- GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "mmc_spi",
- .platform_data = &mmc_spi_info,
- .max_speed_hz = 5000000,
- .mode = SPI_MODE_0,
- },
-};
-
-/* MSIOF0 */
-static struct sh_msiof_spi_info msiof0_data = {
- .num_chipselect = 1,
-};
-
-static struct resource msiof0_resources[] = {
- [0] = {
- .name = "MSIOF0",
- .start = 0xa4c40000,
- .end = 0xa4c40063,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device msiof0_device = {
- .name = "spi_sh_msiof",
- .id = 0, /* MSIOF0 */
- .dev = {
- .platform_data = &msiof0_data,
- },
- .num_resources = ARRAY_SIZE(msiof0_resources),
- .resource = msiof0_resources,
-};
-
-static struct gpiod_lookup_table msiof_gpio_table = {
- .dev_id = "spi_sh_msiof.0",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTM4, "cs", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#endif
-
-/* FSI */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_da7210_info = {
- .name = "DA7210",
- .card = "FSIB-DA7210",
- .codec = "da7210.0-001a",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsib-dai",
- },
- .codec_dai = {
- .name = "da7210-hifi",
- },
-};
-
-static struct platform_device fsi_da7210_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_da7210_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
- },
-};
-
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "SH_MMCIF",
- .start = 0xA4CA0000,
- .end = 0xA4CA00FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* MMC2I */
- .start = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* MMC3I */
- .start = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0, /* SH7724: Max Pclk/2 */
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
- .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-#endif
-
-static struct platform_device *ecovec_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ecovec_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &sh_eth_device,
- &usb0_host_device,
- &usb1_common_device,
- &usbhs_device,
- &lcdc_device,
- &keysc_device,
- &cn12_power,
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- &sdhi0_power,
- &sdhi0_device,
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sdhi1_device,
-#endif
-#else
- &msiof0_device,
-#endif
- &fsi_device,
- &fsi_da7210_device,
- &irda_device,
- &vou_device,
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- &sh_mmcif_device,
-#endif
-};
-
-#ifdef CONFIG_I2C
-#define EEPROM_ADDR 0x50
-static u8 mac_read(struct i2c_adapter *a, u8 command)
-{
- struct i2c_msg msg[2];
- u8 buf;
- int ret;
-
- msg[0].addr = EEPROM_ADDR;
- msg[0].flags = 0;
- msg[0].len = 1;
- msg[0].buf = &command;
-
- msg[1].addr = EEPROM_ADDR;
- msg[1].flags = I2C_M_RD;
- msg[1].len = 1;
- msg[1].buf = &buf;
-
- ret = i2c_transfer(a, msg, 2);
- if (ret < 0) {
- printk(KERN_ERR "error %d\n", ret);
- buf = 0xff;
- }
-
- return buf;
-}
-
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- struct i2c_adapter *a = i2c_get_adapter(1);
- int i;
-
- if (!a) {
- pr_err("can not get I2C 1\n");
- return;
- }
-
- /* read MAC address from EEPROM */
- for (i = 0; i < sizeof(pd->mac_addr); i++) {
- pd->mac_addr[i] = mac_read(a, 0x10 + i);
- msleep(10);
- }
-
- i2c_put_adapter(a);
-}
-#else
-static void __init sh_eth_init(struct sh_eth_plat_data *pd)
-{
- pr_err("unable to read sh_eth MAC address\n");
-}
-#endif
-
-#define PORT_HIZA 0xA4050158
-#define IODRIVEA 0xA405018A
-
-extern char ecovec24_sdram_enter_start;
-extern char ecovec24_sdram_enter_end;
-extern char ecovec24_sdram_leave_start;
-extern char ecovec24_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- struct clk *clk;
- bool cn12_enabled = false;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ecovec24_sdram_enter_start,
- &ecovec24_sdram_enter_end,
- &ecovec24_sdram_leave_start,
- &ecovec24_sdram_leave_end);
-
- /* enable STATUS0, STATUS2 and PDSTATUS */
- gpio_request(GPIO_FN_STATUS0, NULL);
- gpio_request(GPIO_FN_STATUS2, NULL);
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable SCIFA0 */
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
-
- /* enable debug LED */
- gpio_request(GPIO_PTG0, NULL);
- gpio_request(GPIO_PTG1, NULL);
- gpio_request(GPIO_PTG2, NULL);
- gpio_request(GPIO_PTG3, NULL);
- gpio_direction_output(GPIO_PTG0, 0);
- gpio_direction_output(GPIO_PTG1, 0);
- gpio_direction_output(GPIO_PTG2, 0);
- gpio_direction_output(GPIO_PTG3, 0);
- __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
-
- /* enable SH-Eth */
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_output(GPIO_PTA1, 1);
- mdelay(20);
-
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_FN_LNKSTA, NULL);
-
- /* enable USB */
- __raw_writew(0x0000, 0xA4D80000);
- __raw_writew(0x0000, 0xA4D90000);
- gpio_request(GPIO_PTB3, NULL);
- gpio_request(GPIO_PTB4, NULL);
- gpio_request(GPIO_PTB5, NULL);
- gpio_direction_input(GPIO_PTB3);
- gpio_direction_output(GPIO_PTB4, 0);
- gpio_direction_output(GPIO_PTB5, 0);
- __raw_writew(0x0600, 0xa40501d4);
- __raw_writew(0x0600, 0xa4050192);
-
- if (gpio_get_value(GPIO_PTB3)) {
- printk(KERN_INFO "USB1 function is selected\n");
- usb1_common_device.name = "r8a66597_udc";
- } else {
- printk(KERN_INFO "USB1 host is selected\n");
- usb1_common_device.name = "r8a66597_hcd";
- }
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- gpio_request(GPIO_PTE6, NULL);
- gpio_request(GPIO_PTU1, NULL);
- gpio_request(GPIO_PTA2, NULL);
- gpio_direction_input(GPIO_PTE6);
- gpio_direction_output(GPIO_PTU1, 0);
- gpio_direction_output(GPIO_PTA2, 0);
-
- /* I/O buffer drive ability is high */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
-
- if (gpio_get_value(GPIO_PTE6)) {
- /* DVI */
- lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1;
- lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes);
-
- /* No backlight */
- gpio_backlight_data.fbdev = NULL;
-
- gpio_set_value(GPIO_PTA2, 1);
- gpio_set_value(GPIO_PTU1, 1);
- } else {
- /* Panel */
- lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2;
- lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes);
-
- /* FIXME
- *
- * LCDDON control is needed for Panel,
- * but current sh_mobile_lcdc driver doesn't control it.
- * It is temporary correspondence
- */
- gpio_request(GPIO_PTF4, NULL);
- gpio_direction_output(GPIO_PTF4, 1);
-
- /* enable TouchScreen */
- i2c_register_board_info(0, &ts_i2c_clients, 1);
- irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
- }
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* enable KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
-
- /* enable user debug switch */
- gpio_request(GPIO_PTR0, NULL);
- gpio_request(GPIO_PTR4, NULL);
- gpio_request(GPIO_PTR5, NULL);
- gpio_request(GPIO_PTR6, NULL);
- gpio_direction_input(GPIO_PTR0);
- gpio_direction_input(GPIO_PTR4);
- gpio_direction_input(GPIO_PTR5);
- gpio_direction_input(GPIO_PTR6);
-
- /* SD-card slot CN11 */
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
-#else
- /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
- gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
- gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
- gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
- gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
-
- gpiod_add_lookup_table(&mmc_spi_gpio_table);
- gpiod_add_lookup_table(&msiof_gpio_table);
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-#endif
-
- /* MMC/SD-card slot CN12 */
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
- /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
- gpio_request(GPIO_FN_MMC_D7, NULL);
- gpio_request(GPIO_FN_MMC_D6, NULL);
- gpio_request(GPIO_FN_MMC_D5, NULL);
- gpio_request(GPIO_FN_MMC_D4, NULL);
- gpio_request(GPIO_FN_MMC_D3, NULL);
- gpio_request(GPIO_FN_MMC_D2, NULL);
- gpio_request(GPIO_FN_MMC_D1, NULL);
- gpio_request(GPIO_FN_MMC_D0, NULL);
- gpio_request(GPIO_FN_MMC_CLK, NULL);
- gpio_request(GPIO_FN_MMC_CMD, NULL);
-
- cn12_enabled = true;
-#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
-
- cn12_enabled = true;
-#endif
-
- if (cn12_enabled)
- /* I/O buffer drive ability is high for CN12 */
- __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
- IODRIVEA);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI B */
- clk = clk_get(NULL, "fsib_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimckb_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimckb_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- gpio_request(GPIO_PTU0, NULL);
- gpio_direction_output(GPIO_PTU0, 0);
- mdelay(20);
-
- /* enable motion sensor */
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_direction_input(GPIO_FN_INTC_IRQ1);
-
- /* set VPU clock to 166 MHz */
- clk = clk_get(NULL, "vpu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 166000000));
- clk_put(clk);
- }
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
- gpio_request(GPIO_PTU5, NULL);
- gpio_direction_output(GPIO_PTU5, 0);
-
- /* Register gpio lookup tables for cameras and video decoder */
- gpiod_add_lookup_table(&tw9910_gpios);
- gpiod_add_lookup_table(&mt9t112_0_gpios);
- gpiod_add_lookup_table(&mt9t112_1_gpios);
-
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
-
- i2c_register_board_info(1, i2c1_devices,
- ARRAY_SIZE(i2c1_devices));
-
-#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* AK8813 power / reset sequence */
- gpio_request(GPIO_PTG4, NULL);
- gpio_request(GPIO_PTU3, NULL);
- /* Reset */
- gpio_direction_output(GPIO_PTG4, 0);
- /* Power down */
- gpio_direction_output(GPIO_PTU3, 1);
-
- udelay(10);
-
- /* Power up, reset */
- gpio_set_value(GPIO_PTU3, 0);
-
- udelay(10);
-
- /* Remove reset */
- gpio_set_value(GPIO_PTG4, 1);
-#endif
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ecovec_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[0]);
-
- device_initialize(&ecovec_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ecovec_ceu_devices[1]);
-
- gpiod_add_lookup_table(&cn12_power_gpiod_table);
-#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
- gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
- gpiod_add_lookup_table(&sdhi0_gpio_table);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- gpiod_add_lookup_table(&sdhi1_gpio_table);
-#endif
-#endif
-
- gpiod_add_lookup_table(&gpio_backlight_lookup);
- gpio_backlight_device = platform_device_register_full(
- &gpio_backlight_device_info);
- if (IS_ERR(gpio_backlight_device))
- return PTR_ERR(gpio_backlight_device);
-
- return platform_add_devices(ecovec_devices,
- ARRAY_SIZE(ecovec_devices));
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- sh_eth_init(&sh_eth_plat);
- return 0;
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ecovec_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ecovec __initmv = {
- .mv_name = "R0P7724 (EcoVec)",
- .mv_mem_reserve = ecovec_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
deleted file mode 100644
index b0abd03cac4e57..00000000000000
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_HIGHLANDER
-
-choice
- prompt "Highlander options"
- default SH_R7780MP
-
-config SH_R7780RP
- bool "R7780RP-1 board support"
- depends on CPU_SUBTYPE_SH7780
-
-config SH_R7780MP
- bool "R7780MP board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the mass-production
- version of the R7780RP. If in doubt, say Y.
-
-config SH_R7785RP
- bool "R7785RP board support"
- depends on CPU_SUBTYPE_SH7785
- select GPIOLIB
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile
deleted file mode 100644
index 880ed68138b00f..00000000000000
--- a/arch/sh/boards/mach-highlander/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Highlander specific parts of the kernel
-#
-obj-y := setup.o
-obj-$(CONFIG_SH_R7780RP) += irq-r7780rp.o
-obj-$(CONFIG_SH_R7780MP) += irq-r7780mp.o
-obj-$(CONFIG_SH_R7785RP) += irq-r7785rp.o pinmux-r7785rp.o
-
-ifneq ($(CONFIG_SH_R7785RP),y)
-obj-$(CONFIG_PUSH_SWITCH) += psw.o
-endif
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
deleted file mode 100644
index f46637377b6a18..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780MP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- CF, /* Compact Flash */
- TP, /* Touch panel */
- SCIF1, /* FPGA SCIF1 */
- SCIF0, /* FPGA SCIF0 */
- SMBUS, /* SMBUS */
- RTC, /* RTC Alarm */
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
-
- /* external bus connector */
- EXT1, EXT2, EXT4, EXT5, EXT6,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(SCIF1, IRQ_SCIF1),
- INTC_IRQ(SCIF0, IRQ_SCIF0),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(AX88796, IRQ_AX88796),
- INTC_IRQ(PSW, IRQ_PSW),
-
- INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
- 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
- IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
- IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
- 0, IRQ_AX88796, IRQ_PSW,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
- printk(KERN_INFO "Using r7780mp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
deleted file mode 100644
index c61177e8724ba7..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7780RP-1 Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
-
- AX88796, /* Ethernet controller */
- PSW, /* Push Switch */
- CF, /* Compact Flash */
-
- PCI_A,
- PCI_B,
- PCI_C,
- PCI_D,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
- INTC_IRQ(PCI_B, 66),
- INTC_IRQ(PCI_C, 67),
- INTC_IRQ(PCI_D, 68),
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(PSW, IRQ_PSW),
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa5000000, 0, 16, /* IRLMSK */
- { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, PSW, AX88796 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 65, 66, 67, 68,
- IRQ_CF, 0, 0, 0,
- 0, 0, 0, 0,
- IRQ_AX88796, IRQ_PSW
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if (__raw_readw(0xa5000600)) {
- printk(KERN_INFO "Using r7780rp interrupt controller.\n");
- register_intc_controller(&intc_desc);
- return irl2irq;
- }
-
- return NULL;
-}
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
deleted file mode 100644
index 0ebebbed0d63fb..00000000000000
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Solutions Highlander R7785RP Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006 - 2008 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/highlander.h>
-
-enum {
- UNUSED = 0,
-
- /* FPGA specific interrupt sources */
- CF, /* Compact Flash */
- SMBUS, /* SMBUS */
- TP, /* Touch panel */
- RTC, /* RTC Alarm */
- TH_ALERT, /* Temperature sensor */
- AX88796, /* Ethernet controller */
-
- /* external bus connector */
- EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(CF, IRQ_CF),
- INTC_IRQ(SMBUS, IRQ_SMBUS),
- INTC_IRQ(TP, IRQ_TP),
- INTC_IRQ(RTC, IRQ_RTC),
- INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
-
- INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
- INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
-
- INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
- INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
-
- INTC_IRQ(AX88796, IRQ_AX88796),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4000010, 0, 16, /* IRLMCR1 */
- { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
- RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
- { 0xa4000012, 0, 16, /* IRLMCR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
-};
-
-static unsigned char irl2irq[HL_NR_IRL] __initdata = {
- 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
- IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
- IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
- IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
-};
-
-static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
- NULL, mask_registers, NULL, NULL);
-
-unsigned char * __init highlander_plat_irq_setup(void)
-{
- if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
- return NULL;
-
- printk(KERN_INFO "Using r7785rp interrupt controller.\n");
-
- __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
-
- /* Setup the FPGA IRL */
- __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
- __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
- __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
- __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
- __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
- __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
-
- register_intc_controller(&intc_desc);
- return irl2irq;
-}
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
deleted file mode 100644
index 703179faf652b2..00000000000000
--- a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <cpu/sh7785.h>
-
-void __init highlander_plat_pinmux_setup(void)
-{
- /* SCIF0 */
- gpio_request(GPIO_FN_SCIF0_CTS, NULL);
- gpio_request(GPIO_FN_SCIF0_RTS, NULL);
- gpio_request(GPIO_FN_SCIF0_SCK, NULL);
- gpio_request(GPIO_FN_SCIF0_RXD, NULL);
- gpio_request(GPIO_FN_SCIF0_TXD, NULL);
-}
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
deleted file mode 100644
index d445c54f74e440..00000000000000
--- a/arch/sh/boards/mach-highlander/psw.c
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/highlander.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int l, mask;
- int ret = 0;
-
- l = __raw_readw(PA_DBSW);
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- mask = l & 0x70;
- /* Figure out who raised it */
- if (mask & (1 << psw_info->bit)) {
- psw->state = !!(mask & (1 << psw_info->bit));
- if (psw->state) /* debounce */
- mod_timer(&psw->debounce, jiffies + 50);
-
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- l |= (0x7 << 12);
- __raw_writew(l, PA_DBSW);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
- [0] = {
- .start = IRQ_PSW,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info s2_platform_data = {
- .name = "s2",
- .bit = 6,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s2_platform_data,
- },
-};
-
-static struct push_switch_platform_info s3_platform_data = {
- .name = "s3",
- .bit = 5,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s3_platform_data,
- },
-};
-
-static struct push_switch_platform_info s4_platform_data = {
- .name = "s4",
- .bit = 4,
- .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_resources),
- .resource = psw_resources,
- .dev = {
- .platform_data = &s4_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
deleted file mode 100644
index 533393d779c2b9..00000000000000
--- a/arch/sh/boards/mach-highlander/setup.c
+++ /dev/null
@@ -1,416 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/r7780rp/setup.c
- *
- * Renesas Solutions Highlander Support.
- *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005 - 2008 Paul Mundt
- *
- * This contains support for the R7780RP-1, R7780MP, and R7785RP
- * Highlander modules.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/types.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/clkdev.h>
-#include <net/ax88796.h>
-#include <asm/machvec.h>
-#include <mach/highlander.h>
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xA4200000,
- .end = 0xA42000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EXT1, /* irq number */
- .end = IRQ_EXT1,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0xb0000000,
- .end = 0xb00000FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- .start = IRQ_EXT4, /* irq number */
- .end = IRQ_EXT4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x08 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c + 0x16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CF,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OBLED,
- .end = PA_OBLED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-#ifndef CONFIG_SH_R7785RP
-static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-#endif
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
-
- /* R7785RP has a slightly more sensible FPGA.. */
-#ifndef CONFIG_SH_R7785RP
- .dev = {
- .platform_data = &heartbeat_data,
- },
-#endif
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct ax_plat_data ax88796_platdata = {
- .flags = AXFLG_HAS_93CX6,
- .wordlength = 2,
- .dcr_val = 0x1,
- .rcr_val = 0x40,
-};
-
-static struct resource ax88796_resources[] = {
- {
-#ifdef CONFIG_SH_R7780RP
- .start = 0xa5800400,
- .end = 0xa5800400 + (0x20 * 0x2) - 1,
-#else
- .start = 0xa4100400,
- .end = 0xa4100400 + (0x20 * 0x2) - 1,
-#endif
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_AX88796,
- .end = IRQ_AX88796,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ax88796_device = {
- .name = "ax88796",
- .id = 0,
-
- .dev = {
- .platform_data = &ax88796_platdata,
- },
-
- .num_resources = ARRAY_SIZE(ax88796_resources),
- .resource = ax88796_resources,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-/* This config is flash board for mass production. */
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = PA_NORFLASH_ADDR,
- .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct resource smbus_resources[] = {
- [0] = {
- .start = PA_SMCR,
- .end = PA_SMCR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SMBUS,
- .end = IRQ_SMBUS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smbus_device = {
- .name = "i2c-highlander",
- .id = 0,
- .num_resources = ARRAY_SIZE(smbus_resources),
- .resource = smbus_resources,
-};
-
-static struct i2c_board_info __initdata highlander_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static struct platform_device *r7780rp_devices[] __initdata = {
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &heartbeat_device,
- &smbus_device,
- &nor_flash_device,
-#ifndef CONFIG_SH_R7780RP
- &ax88796_device,
-#endif
-};
-
-/*
- * The CF is connected using a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init r7780rp_devices_setup(void)
-{
- int ret = 0;
-
-#ifndef CONFIG_SH_R7780RP
- if (register_trapped_io(&cf_trapped_io) == 0)
- ret |= platform_device_register(&cf_ide_device);
-#endif
-
- ret |= platform_add_devices(r7780rp_devices,
- ARRAY_SIZE(r7780rp_devices));
-
- ret |= i2c_register_board_info(0, highlander_i2c_devices,
- ARRAY_SIZE(highlander_i2c_devices));
-
- return ret;
-}
-device_initcall(r7780rp_devices_setup);
-
-/*
- * Platform specific clocks
- */
-static int ivdr_clk_enable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
- return 0;
-}
-
-static void ivdr_clk_disable(struct clk *clk)
-{
- __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
-}
-
-static struct sh_clk_ops ivdr_clk_ops = {
- .enable = ivdr_clk_enable,
- .disable = ivdr_clk_disable,
-};
-
-static struct clk ivdr_clk = {
- .ops = &ivdr_clk_ops,
-};
-
-static struct clk *r7780rp_clocks[] = {
- &ivdr_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
-};
-
-static void r7780rp_power_off(void)
-{
- if (mach_is_r7780mp() || mach_is_r7785rp())
- __raw_writew(0x0001, PA_POFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init highlander_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(PA_VERREG);
- int i;
-
- printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
- mach_is_r7780rp() ? "R7780RP-1" :
- mach_is_r7780mp() ? "R7780MP" :
- "R7785RP");
-
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d)\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf);
-
- highlander_plat_pinmux_setup();
-
- /*
- * Enable the important clocks right away..
- */
- for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
- struct clk *clk = r7780rp_clocks[i];
-
- clk_register(clk);
- clk_enable(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
-
- if (mach_is_r7780rp())
- __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
-
- __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
-
- pm_power_off = r7780rp_power_off;
-}
-
-static unsigned char irl2irq[HL_NR_IRL];
-
-static int highlander_irq_demux(int irq)
-{
- if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-static void __init highlander_init_irq(void)
-{
- unsigned char *ucp = highlander_plat_irq_setup();
-
- if (ucp) {
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
- memcpy(irl2irq, ucp, HL_NR_IRL);
- }
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_highlander __initmv = {
- .mv_name = "Highlander",
- .mv_setup = highlander_setup,
- .mv_init_irq = highlander_init_irq,
- .mv_irq_demux = highlander_irq_demux,
-};
diff --git a/arch/sh/boards/mach-hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
deleted file mode 100644
index 4b0fe29e5612eb..00000000000000
--- a/arch/sh/boards/mach-hp6xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HP6xx specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_PM) += pm.o pm_wakeup.o
-obj-$(CONFIG_APM_EMULATION) += hp6xx_apm.o
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
deleted file mode 100644
index e5c4c7d34139ea..00000000000000
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * bios-less APM driver for hp680
- *
- * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
- * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-#include <asm/adc.h>
-#include <mach/hp6xx.h>
-
-/* percentage values */
-#define APM_CRITICAL 10
-#define APM_LOW 30
-
-/* resonably sane values */
-#define HP680_BATTERY_MAX 898
-#define HP680_BATTERY_MIN 486
-#define HP680_BATTERY_AC_ON 1023
-
-#define MODNAME "hp6x0_apm"
-
-#define PGDR 0xa400012c
-
-static void hp6x0_apm_get_power_status(struct apm_power_info *info)
-{
- int battery, backup, charging, percentage;
- u8 pgdr;
-
- battery = adc_single(ADC_CHANNEL_BATTERY);
- backup = adc_single(ADC_CHANNEL_BACKUP);
- charging = adc_single(ADC_CHANNEL_CHARGE);
-
- percentage = 100 * (battery - HP680_BATTERY_MIN) /
- (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
-
- /* % of full battery */
- info->battery_life = percentage;
-
- /* We want our estimates in minutes */
- info->units = 0;
-
- /* Extremely(!!) rough estimate, we will replace this with a datalist later on */
- info->time = (2 * battery);
-
- info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
- APM_AC_ONLINE : APM_AC_OFFLINE;
-
- pgdr = __raw_readb(PGDR);
- if (pgdr & PGDR_MAIN_BATTERY_OUT) {
- info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
- info->battery_flag = 0x80;
- } else if (charging < 8) {
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- info->battery_flag = 0x08;
- info->ac_line_status = 0x01;
- } else if (percentage <= APM_CRITICAL) {
- info->battery_status = APM_BATTERY_STATUS_CRITICAL;
- info->battery_flag = 0x04;
- } else if (percentage <= APM_LOW) {
- info->battery_status = APM_BATTERY_STATUS_LOW;
- info->battery_flag = 0x02;
- } else {
- info->battery_status = APM_BATTERY_STATUS_HIGH;
- info->battery_flag = 0x01;
- }
-}
-
-static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
-{
- if (!APM_DISABLED)
- apm_queue_event(APM_USER_SUSPEND);
-
- return IRQ_HANDLED;
-}
-
-static int __init hp6x0_apm_init(void)
-{
- int ret;
-
- ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- 0, MODNAME, NULL);
- if (unlikely(ret < 0)) {
- printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
- HP680_BTN_IRQ);
- return ret;
- }
-
- apm_get_power_status = hp6x0_apm_get_power_status;
-
- return ret;
-}
-
-static void __exit hp6x0_apm_exit(void)
-{
- free_irq(HP680_BTN_IRQ, 0);
-}
-
-module_init(hp6x0_apm_init);
-module_exit(hp6x0_apm_exit);
-
-MODULE_AUTHOR("Adriy Skulysh");
-MODULE_DESCRIPTION("hp6xx Advanced Power Management");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
deleted file mode 100644
index fe505ec168d021..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/bl_bit.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-#include <asm/freq.h>
-#include <asm/watchdog.h>
-
-#define INTR_OFFSET 0x600
-
-#define STBCR 0xffffff82
-#define STBCR2 0xffffff88
-
-#define STBCR_STBY 0x80
-#define STBCR_MSTP2 0x04
-
-#define MCR 0xffffff68
-#define RTCNT 0xffffff70
-
-#define MCR_RMODE 2
-#define MCR_RFSH 4
-
-extern u8 wakeup_start;
-extern u8 wakeup_end;
-
-static void pm_enter(void)
-{
- u8 stbcr, csr;
- u16 frqcr, mcr;
- u32 vbr_new, vbr_old;
-
- set_bl_bit();
-
- /* set wdt */
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- csr |= WTCSR_CKS_4096;
- sh_wdt_write_csr(csr);
- csr = sh_wdt_read_csr();
- sh_wdt_write_cnt(0);
-
- /* disable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
- __raw_writew(frqcr, FRQCR);
-
- /* enable standby */
- stbcr = __raw_readb(STBCR);
- __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
-
- /* set self-refresh */
- mcr = __raw_readw(MCR);
- __raw_writew(mcr & ~MCR_RFSH, MCR);
-
- /* set interrupt handler */
- asm volatile("stc vbr, %0" : "=r" (vbr_old));
- vbr_new = get_zeroed_page(GFP_ATOMIC);
- udelay(50);
- memcpy((void*)(vbr_new + INTR_OFFSET),
- &wakeup_start, &wakeup_end - &wakeup_start);
- asm volatile("ldc %0, vbr" : : "r" (vbr_new));
-
- __raw_writew(0, RTCNT);
- __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
-
- cpu_sleep();
-
- asm volatile("ldc %0, vbr" : : "r" (vbr_old));
-
- free_page(vbr_new);
-
- /* enable PLL1 */
- frqcr = __raw_readw(FRQCR);
- frqcr |= FRQCR_PSTBY;
- __raw_writew(frqcr, FRQCR);
- udelay(50);
- frqcr |= FRQCR_PLLEN;
- __raw_writew(frqcr, FRQCR);
-
- __raw_writeb(stbcr, STBCR);
-
- clear_bl_bit();
-}
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
- u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
- u8 scr;
- u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
- outb(0, HD64461_PCC1CSCIER);
-
- scr = inb(HD64461_PCC1SCR);
- scr |= HD64461_PCCSCR_VCC1;
- outb(scr, HD64461_PCC1SCR);
-
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr |= HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
- __raw_writeb(0x1f, DACR);
-
- stbcr = __raw_readb(STBCR);
- __raw_writeb(0x01, STBCR);
-
- stbcr2 = __raw_readb(STBCR2);
- __raw_writeb(0x7f , STBCR2);
-
- outw(0xf07f, HD64461_SCPUCR);
-
- pm_enter();
-
- outw(0, HD64461_SCPUCR);
- __raw_writeb(stbcr, STBCR);
- __raw_writeb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
- hd64461_stbcr = inw(HD64461_STBCR);
- hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
- outw(hd64461_stbcr, HD64461_STBCR);
-
- outb(0x4c, HD64461_PCC1CSCIER);
- outb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-static const struct platform_suspend_ops hp6x0_pm_ops = {
- .enter = hp6x0_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
- suspend_set_ops(&hp6x0_pm_ops);
- return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
deleted file mode 100644
index 0fd43301f083d0..00000000000000
--- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- */
-
-#include <linux/linkage.h>
-#include <cpu/mmu_context.h>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * For more details, please have a look at entry.S
- */
-
-#define k0 r0
-#define k1 r1
-
-ENTRY(wakeup_start)
-! clear STBY bit
- mov #-126, k1
- and #127, k0
- mov.b k0, @k1
-! enable refresh
- mov.l 5f, k1
- mov.w 6f, k0
- mov.w k0, @k1
-! jump to handler
- mov.l 4f, k1
- jmp @k1
- nop
-
- .align 2
-4: .long handle_interrupt
-5: .long 0xffffff68
-6: .word 0x0524
-
-ENTRY(wakeup_end)
- nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
deleted file mode 100644
index 2ceead68d7bf82..00000000000000
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/sh_intc.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-#define SCPCR 0xa4000116
-#define SCPDR 0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x15000000 + 0x1f0,
- .end = 0x15000000 + 0x1f0 + 0x08 - 0x01,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x15000000 + 0x1fe,
- .end = 0x15000000 + 0x1fe + 0x01,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
- .name = "jornada680_kbd",
- .id = -1,
-};
-
-static void dac_audio_start(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker on */
- v = inw(HD64461_GPADR);
- v &= ~HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker on */
- v8 = inb(PKDR);
- v8 &= ~PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_enable(pdata->channel);
-}
-
-static void dac_audio_stop(struct dac_audio_pdata *pdata)
-{
- u16 v;
- u8 v8;
-
- /* HP Jornada 680/690 speaker off */
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-
- /* HP Palmtop 620lx/660lx speaker off */
- v8 = inb(PKDR);
- v8 |= PKDR_SPEAKER;
- outb(v8, PKDR);
-
- sh_dac_output(0, pdata->channel);
- sh_dac_disable(pdata->channel);
-}
-
-static struct dac_audio_pdata dac_audio_platform_data = {
- .buffer_size = 64000,
- .channel = 1,
- .start = dac_audio_start,
- .stop = dac_audio_stop,
-};
-
-static struct platform_device dac_audio_device = {
- .name = "dac_audio",
- .id = -1,
- .dev = {
- .platform_data = &dac_audio_platform_data,
- }
-
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
- &cf_ide_device,
- &jornadakbd_device,
- &dac_audio_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
- /* Gets touchscreen and powerbutton IRQ working */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
- return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
- u8 v8;
- u16 v;
-
- v = inw(HD64461_STBCR);
- v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
- HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
- HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
- HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
- HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
- v |= HD64461_STBCR_SPC1ST;
-#endif
- outw(v, HD64461_STBCR);
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
- outw(v, HD64461_GPADR);
-
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
- outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
- sh_dac_output(0, DAC_SPEAKER_VOLUME);
- sh_dac_disable(DAC_SPEAKER_VOLUME);
- v8 = __raw_readb(DACR);
- v8 &= ~DACR_DAE;
- __raw_writeb(v8,DACR);
-
- v8 = __raw_readb(SCPDR);
- v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
- v8 &= ~SCPDR_TS_SCAN_ENABLE;
- __raw_writeb(v8, SCPDR);
-
- v = __raw_readw(SCPCR);
- v &= ~SCPCR_TS_MASK;
- v |= SCPCR_TS_ENABLE;
- __raw_writew(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
- .mv_name = "hp6xx",
- .mv_setup = hp6xx_setup,
- /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
- .mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
deleted file mode 100644
index 4a4a35ad7ba07c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
-obj-y += lcd_wqvga.o
-endif
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
deleted file mode 100644
index f6bbac106d1328..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 LCD panel support
- *
- * Copyright (C) 2009 Magnus Damm
- *
- * Register settings based on the out-of-tree t33fb.c driver
- * Copyright (C) 2008 Lineo Solutions, Inc.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <mach/kfr2r09.h>
-#include <cpu/sh7724.h>
-
-/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
- * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
- * communicating with the main port of the LCDC using an 18-bit SYS interface.
- *
- * The device code for this LCD module is 0x01221517.
- */
-
-static const unsigned char data_frame_if[] = {
- 0x02, /* WEMODE: 1=cont, 0=one-shot */
- 0x00, 0x00,
- 0x00, /* EPF, DFM */
- 0x02, /* RIM[1] : 1 (18bpp) */
-};
-
-static const unsigned char data_panel[] = {
- 0x0b,
- 0x63, /* 400 lines */
- 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
-};
-
-static const unsigned char data_timing[] = {
- 0x00, 0x00, 0x13, 0x08, 0x08,
-};
-
-static const unsigned char data_timing_src[] = {
- 0x11, 0x01, 0x00, 0x01,
-};
-
-static const unsigned char data_gamma[] = {
- 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
- 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
-};
-
-static const unsigned char data_power[] = {
- 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
-};
-
-static unsigned long read_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- return so->read_data(sohandle);
-}
-
-static void write_reg(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- int i, unsigned long v)
-{
- if (i)
- so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
- else
- so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
-}
-
-static void write_data(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so,
- unsigned char const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i++)
- write_reg(sohandle, so, 1, data[i]);
-}
-
-static unsigned long read_device_code(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long device_code;
-
- /* access protect OFF */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* deep standby OFF */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* device code command */
- write_reg(sohandle, so, 0, 0xbf);
- mdelay(50);
-
- /* dummy read */
- read_reg(sohandle, so);
-
- /* read device code */
- device_code = ((read_reg(sohandle, so) & 0xff) << 24);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
- device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
- device_code |= (read_reg(sohandle, so) & 0xff);
-
- return device_code;
-}
-
-static void write_memory_start(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_reg(sohandle, so, 0, 0x2c);
-}
-
-static void clear_memory(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- int i;
-
- /* write start */
- write_memory_start(sohandle, so);
-
- /* paint it black */
- for (i = 0; i < (240 * 400); i++)
- write_reg(sohandle, so, 1, 0x00);
-}
-
-static void display_on(void *sohandle,
- struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* access protect off */
- write_reg(sohandle, so, 0, 0xb0);
- write_reg(sohandle, so, 1, 0x00);
-
- /* exit deep standby mode */
- write_reg(sohandle, so, 0, 0xb1);
- write_reg(sohandle, so, 1, 0x00);
-
- /* frame memory I/F */
- write_reg(sohandle, so, 0, 0xb3);
- write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
-
- /* display mode and frame memory write mode */
- write_reg(sohandle, so, 0, 0xb4);
- write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
-
- /* panel */
- write_reg(sohandle, so, 0, 0xc0);
- write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
-
- /* timing (normal) */
- write_reg(sohandle, so, 0, 0xc1);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (partial) */
- write_reg(sohandle, so, 0, 0xc2);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (idle) */
- write_reg(sohandle, so, 0, 0xc3);
- write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
-
- /* timing (source/VCOM/gate driving) */
- write_reg(sohandle, so, 0, 0xc4);
- write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
-
- /* gamma (red) */
- write_reg(sohandle, so, 0, 0xc8);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (green) */
- write_reg(sohandle, so, 0, 0xc9);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* gamma (blue) */
- write_reg(sohandle, so, 0, 0xca);
- write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
-
- /* power (common) */
- write_reg(sohandle, so, 0, 0xd0);
- write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
-
- /* VCOM */
- write_reg(sohandle, so, 0, 0xd1);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x0f);
- write_reg(sohandle, so, 1, 0x02);
-
- /* power (normal) */
- write_reg(sohandle, so, 0, 0xd2);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (partial) */
- write_reg(sohandle, so, 0, 0xd3);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- /* power (idle) */
- write_reg(sohandle, so, 0, 0xd4);
- write_reg(sohandle, so, 1, 0x63);
- write_reg(sohandle, so, 1, 0x24);
-
- write_reg(sohandle, so, 0, 0xd8);
- write_reg(sohandle, so, 1, 0x77);
- write_reg(sohandle, so, 1, 0x77);
-
- /* TE signal */
- write_reg(sohandle, so, 0, 0x35);
- write_reg(sohandle, so, 1, 0x00);
-
- /* TE signal line */
- write_reg(sohandle, so, 0, 0x44);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
-
- /* column address */
- write_reg(sohandle, so, 0, 0x2a);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0xef);
-
- /* page address */
- write_reg(sohandle, so, 0, 0x2b);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x00);
- write_reg(sohandle, so, 1, 0x01);
- write_reg(sohandle, so, 1, 0x8f);
-
- /* exit sleep mode */
- write_reg(sohandle, so, 0, 0x11);
-
- mdelay(120);
-
- /* clear vram */
- clear_memory(sohandle, so);
-
- /* display ON */
- write_reg(sohandle, so, 0, 0x29);
- mdelay(1);
-
- write_memory_start(sohandle, so);
-}
-
-int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- /* power on */
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
- gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
- udelay(1100);
- gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
- udelay(10);
- gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
- mdelay(20);
-
- if (read_device_code(sohandle, so) != 0x01221517)
- return -ENODEV;
-
- pr_info("KFR2R09 WQVGA LCD Module detected.\n");
-
- display_on(sohandle, so);
- return 0;
-}
-
-void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- write_memory_start(sohandle, so);
-}
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
deleted file mode 100644
index f1b8985cb9223c..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/sdram.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * KFR2R09 sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(kfr2r09_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_enter_end)
-
- .balign 4
-ENTRY(kfr2r09_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
- ED 0xFD000020, 0x011B0002 /* DBCONF */
- ED 0xFD000030, 0x03060E02 /* DBTR0 */
- ED 0xFD000034, 0x01020102 /* DBTR1 */
- ED 0xFD000038, 0x01090406 /* DBTR2 */
- ED 0xFD000008, 0x00000004 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
- WAIT 1
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
- ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
deleted file mode 100644
index 20f4db778ed6ae..00000000000000
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * KFR2R09 board support code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_data/lv5207lp.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach/kfr2r09.h>
-
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/rj54n1cb0c.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-/* set VIO_CKO clock to 25MHz */
-#define CEU_MCLK_FREQ 25000000
-#define DRVCRB 0xA405018C
-
-static struct mtd_partition kfr2r09_nor_flash_partitions[] =
-{
- {
- .name = "boot",
- .offset = 0,
- .size = (4 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data kfr2r09_nor_flash_data = {
- .width = 2,
- .parts = kfr2r09_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
-};
-
-static struct resource kfr2r09_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nor_flash_device = {
- .name = "physmap-flash",
- .resource = kfr2r09_nor_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
- .dev = {
- .platform_data = &kfr2r09_nor_flash_data,
- },
-};
-
-static struct resource kfr2r09_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x10000000,
- .end = 0x1001ffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device kfr2r09_nand_flash_device = {
- .name = "onenand-flash",
- .resource = kfr2r09_nand_flash_resources,
- .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
-};
-
-static struct sh_keysc_info kfr2r09_sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 10,
- .keycodes = {
- KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
- KEY_1, KEY_2, KEY_3, 0, KEY_UP,
- KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
- KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
- KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
- 0, 0, 0, 0, 0
- },
-};
-
-static struct resource kfr2r09_sh_keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
- .resource = kfr2r09_sh_keysc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_keysc_info,
- },
-};
-
-static const struct fb_videomode kfr2r09_lcdc_modes[] = {
- {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
-};
-
-static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS18,
- .clock_divider = 6,
- .flags = LCDC_FLAGS_DWPOL,
- .lcd_modes = kfr2r09_lcdc_modes,
- .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
- .panel_cfg = {
- .width = 35,
- .height = 58,
- .setup_sys = kfr2r09_lcd_setup,
- .start_transfer = kfr2r09_lcd_start,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x07010904,
- .ldmt3r = 0x14012914,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-};
-
-static struct resource kfr2r09_sh_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_sh_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
- .resource = kfr2r09_sh_lcdc_resources,
- .dev = {
- .platform_data = &kfr2r09_sh_lcdc_info,
- },
-};
-
-static struct lv5207lp_platform_data kfr2r09_backlight_data = {
- .fbdev = &kfr2r09_sh_lcdc_device.dev,
- .def_value = 13,
- .max_value = 13,
-};
-
-static struct i2c_board_info kfr2r09_backlight_board_info = {
- I2C_BOARD_INFO("lv5207lp", 0x75),
- .platform_data = &kfr2r09_backlight_data,
-};
-
-static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource kfr2r09_usb0_gadget_resources[] = {
- [0] = {
- .start = 0x04d80000,
- .end = 0x04d80123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device kfr2r09_usb0_gadget_device = {
- .name = "r8a66597_udc",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &kfr2r09_usb0_gadget_data,
- },
- .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
- .resource = kfr2r09_usb0_gadget_resources,
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 1,
- .subdevs = {
- { /* [0] = rj54n1cb0c */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 1,
- .i2c_address = 0x50,
- },
- },
-};
-
-static struct resource kfr2r09_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device kfr2r09_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu0" clock */
- .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
- .resource = kfr2r09_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-static struct rj54n1_pdata rj54n1_priv = {
- .mclk_freq = CEU_MCLK_FREQ,
- .ioctl_high = false,
-};
-
-static struct i2c_board_info kfr2r09_i2c_camera = {
- I2C_BOARD_INFO("rj54n1cb0c", 0x50),
- .platform_data = &rj54n1_priv,
-};
-
-static struct gpiod_lookup_table rj54n1_gpios = {
- .dev_id = "1-0050",
- .table = {
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
- GPIO_ACTIVE_HIGH),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource kfr2r09_sh_sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
- .capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
-};
-
-static struct platform_device kfr2r09_sh_sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
- .resource = kfr2r09_sh_sdhi0_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct platform_device *kfr2r09_devices[] __initdata = {
- &kfr2r09_nor_flash_device,
- &kfr2r09_nand_flash_device,
- &kfr2r09_sh_keysc_device,
- &kfr2r09_sh_lcdc_device,
- &kfr2r09_sh_sdhi0_device,
-};
-
-#define BSC_CS0BCR 0xfec10004
-#define BSC_CS0WCR 0xfec10024
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS4WCR 0xfec10030
-#define PORT_MSELCRB 0xa4050182
-
-#ifdef CONFIG_I2C
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 1);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- struct i2c_adapter *a;
- struct i2c_msg msg;
- unsigned char buf[2];
- int ret;
-
- a = i2c_get_adapter(0);
- if (!a)
- return -ENODEV;
-
- /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[0] = 0;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 1;
- msg.flags = I2C_M_RD;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- buf[1] = buf[0] | (1 << 6);
- buf[0] = 0x13;
- msg.addr = 0x09;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- if (ret != 1)
- return -ENODEV;
-
- return 0;
-}
-#else
-static int kfr2r09_usb0_gadget_i2c_setup(void)
-{
- return -ENODEV;
-}
-
-static int kfr2r09_serial_i2c_setup(void)
-{
- return -ENODEV;
-}
-#endif
-
-static int kfr2r09_usb0_gadget_setup(void)
-{
- int plugged_in;
-
- gpio_request(GPIO_PTN4, NULL); /* USB_DET */
- gpio_direction_input(GPIO_PTN4);
- plugged_in = gpio_get_value(GPIO_PTN4);
- if (!plugged_in)
- return -ENODEV; /* no cable plugged in */
-
- if (kfr2r09_usb0_gadget_i2c_setup() != 0)
- return -ENODEV; /* unable to configure using i2c */
-
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
- gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
- gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
- gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
- msleep(20); /* wait 20ms to let the clock settle */
- clk_enable(clk_get(NULL, "usb0"));
- __raw_writew(0x0600, 0xa40501d4);
-
- return 0;
-}
-
-extern char kfr2r09_sdram_enter_start;
-extern char kfr2r09_sdram_enter_end;
-extern char kfr2r09_sdram_leave_start;
-extern char kfr2r09_sdram_leave_end;
-
-static int __init kfr2r09_devices_setup(void)
-{
- struct clk *camera_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &kfr2r09_sdram_enter_start,
- &kfr2r09_sdram_enter_end,
- &kfr2r09_sdram_leave_start,
- &kfr2r09_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* enable SCIF1 serial port for YC401 console support */
- gpio_request(GPIO_FN_SCIF1_RXD, NULL);
- gpio_request(GPIO_FN_SCIF1_TXD, NULL);
- kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
- gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
- gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
-
- /* setup NOR flash at CS0 */
- __raw_writel(0x36db0400, BSC_CS0BCR);
- __raw_writel(0x00000500, BSC_CS0WCR);
-
- /* setup NAND flash at CS4 */
- __raw_writel(0x36db0400, BSC_CS4BCR);
- __raw_writel(0x00000500, BSC_CS4WCR);
-
- /* setup KEYSC pins */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* setup LCDC pins for SYS panel */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
- gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
- gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
- gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
- gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
- gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
- gpio_direction_output(GPIO_PTE4, 1);
- gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
- gpio_direction_output(GPIO_PTF4, 1);
- gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
- gpio_direction_output(GPIO_PTU0, 1);
-
- /* setup USB function */
- if (kfr2r09_usb0_gadget_setup() == 0)
- platform_device_register(&kfr2r09_usb0_gadget_device);
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
-
- /* SDHI0 connected to yc304 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
-
- /* Set camera clock frequency and register and alias for rj54n1. */
- camera_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(camera_clk)) {
- clk_set_rate(camera_clk,
- clk_round_rate(camera_clk, CEU_MCLK_FREQ));
- clk_put(camera_clk);
- }
- clk_add_alias(NULL, "1-0050", "video_clk", NULL);
-
- /* set DRVCRB
- *
- * use 1.8 V for VccQ_VIO
- * use 2.85V for VccQ_SR
- */
- __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
-
- gpiod_add_lookup_table(&rj54n1_gpios);
-
- i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&kfr2r09_ceu_device.dev);
- dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&kfr2r09_ceu_device);
-
- return platform_add_devices(kfr2r09_devices,
- ARRAY_SIZE(kfr2r09_devices));
-}
-device_initcall(kfr2r09_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int kfr2r09_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * MD8=1: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init kfr2r09_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_kfr2r09 __initmv = {
- .mv_name = "kfr2r09",
- .mv_mode_pins = kfr2r09_mode_pins,
- .mv_mem_reserve = kfr2r09_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
deleted file mode 100644
index 6cba041fffe0f3..00000000000000
--- a/arch/sh/boards/mach-landisk/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
-#
-
-obj-y := setup.o irq.o psw.o gio.o
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
deleted file mode 100644
index ff2200fec29a76..00000000000000
--- a/arch/sh/boards/mach-landisk/gio.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- * Copylight (C) 2006 kogiidena
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <mach-landisk/mach/gio.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-#define DEVCOUNT 4
-#define GIO_MINOR 2 /* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
- int ret = -ENOENT;
-
- preempt_disable();
- if (minor < DEVCOUNT) {
- if (openCnt > 0) {
- ret = -EALREADY;
- } else {
- openCnt++;
- ret = 0;
- }
- }
- preempt_enable();
- return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
- int minor = iminor(inode);
-
- if (minor < DEVCOUNT) {
- openCnt--;
- }
- return 0;
-}
-
-static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- unsigned int data;
- static unsigned int addr = 0;
-
- if (cmd & 0x01) { /* write */
- if (copy_from_user(&data, (int *)arg, sizeof(int))) {
- return -EFAULT;
- }
- }
-
- switch (cmd) {
- case GIODRV_IOCSGIOSETADDR: /* address set */
- addr = data;
- break;
-
- case GIODRV_IOCSGIODATA1: /* write byte */
- __raw_writeb((unsigned char)(0x0ff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA2: /* write word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- __raw_writew((unsigned short int)(0x0ffff & data), addr);
- break;
-
- case GIODRV_IOCSGIODATA4: /* write long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- __raw_writel(data, addr);
- break;
-
- case GIODRV_IOCGGIODATA1: /* read byte */
- data = __raw_readb(addr);
- break;
-
- case GIODRV_IOCGGIODATA2: /* read word */
- if (addr & 0x01) {
- return -EFAULT;
- }
- data = __raw_readw(addr);
- break;
-
- case GIODRV_IOCGGIODATA4: /* read long */
- if (addr & 0x03) {
- return -EFAULT;
- }
- data = __raw_readl(addr);
- break;
- default:
- return -EFAULT;
- break;
- }
-
- if ((cmd & 0x01) == 0) { /* read */
- if (copy_to_user((int *)arg, &data, sizeof(int))) {
- return -EFAULT;
- }
- }
- return 0;
-}
-
-static const struct file_operations gio_fops = {
- .owner = THIS_MODULE,
- .open = gio_open, /* open */
- .release = gio_close, /* release */
- .unlocked_ioctl = gio_ioctl,
- .llseek = noop_llseek,
-};
-
-static int __init gio_init(void)
-{
- int error;
-
- printk(KERN_INFO "gio: driver initialized\n");
-
- openCnt = 0;
-
- if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
- printk(KERN_ERR
- "gio: Couldn't alloc_chrdev_region, error=%d\n",
- error);
- return 1;
- }
-
- cdev_p = cdev_alloc();
- cdev_p->ops = &gio_fops;
- error = cdev_add(cdev_p, dev, DEVCOUNT);
- if (error) {
- printk(KERN_ERR
- "gio: Couldn't cdev_add, error=%d\n", error);
- return 1;
- }
-
- return 0;
-}
-
-static void __exit gio_exit(void)
-{
- cdev_del(cdev_p);
- unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
deleted file mode 100644
index 0b672b80c56179..00000000000000
--- a/arch/sh/boards/mach-landisk/irq.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- * Copyright (C) 2011 Nobuhiro Iwamatsu
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-
-enum {
- UNUSED = 0,
-
- PCI_INTA, /* PCI int A */
- PCI_INTB, /* PCI int B */
- PCI_INTC, /* PCI int C */
- PCI_INTD, /* PCI int D */
- ATA, /* ATA */
- FATA, /* CF */
- POWER, /* Power switch */
- BUTTON, /* Button switch */
-};
-
-/* Vectors for LANDISK */
-static struct intc_vect vectors_landisk[] __initdata = {
- INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
- INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
- INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
- INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
- INTC_IRQ(ATA, IRQ_ATA),
- INTC_IRQ(FATA, IRQ_FATA),
- INTC_IRQ(POWER, IRQ_POWER),
- INTC_IRQ(BUTTON, IRQ_BUTTON),
-};
-
-/* IRLMSK mask register layout for LANDISK */
-static struct intc_mask_reg mask_registers_landisk[] __initdata = {
- { PA_IMASK, 0, 8, /* IRLMSK */
- { BUTTON, POWER, FATA, ATA,
- PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
- }
- },
-};
-
-static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
- mask_registers_landisk, NULL, NULL);
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
- register_intc_controller(&intc_desc_landisk);
- __raw_writeb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
deleted file mode 100644
index e171d9af48f3df..00000000000000
--- a/arch/sh/boards/mach-landisk/psw.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007 Paul Mundt
- * Copyright (C) 2007 kogiidena
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
- struct platform_device *pdev = arg;
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- unsigned int sw_value;
- int ret = 0;
-
- sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
-
- /* Nothing to do if there's no state change */
- if (psw->state) {
- ret = 1;
- goto out;
- }
-
- /* Figure out who raised it */
- if (sw_value & (1 << psw_info->bit)) {
- psw->state = 1;
- mod_timer(&psw->debounce, jiffies + 50);
- ret = 1;
- }
-
-out:
- /* Clear the switch IRQs */
- __raw_writeb(0x00, PA_PWRINT_CLR);
-
- return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
- [0] = {
- .start = IRQ_POWER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource psw_usl5p_resources[] = {
- [0] = {
- .start = IRQ_BUTTON,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
- .name = "psw_power",
- .bit = 4,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
- .name = "psw1",
- .bit = 0,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
- .name = "psw2",
- .bit = 2,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
- .name = "psw3",
- .bit = 1,
- .irq_flags = IRQF_SHARED,
- .irq_handler = psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
- .name = "push-switch",
- .id = 0,
- .num_resources = ARRAY_SIZE(psw_power_resources),
- .resource = psw_power_resources,
- .dev = {
- .platform_data = &psw_power_platform_data,
- },
-};
-
-static struct platform_device psw1_switch_device = {
- .name = "push-switch",
- .id = 1,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw1_platform_data,
- },
-};
-
-static struct platform_device psw2_switch_device = {
- .name = "push-switch",
- .id = 2,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw2_platform_data,
- },
-};
-
-static struct platform_device psw3_switch_device = {
- .name = "push-switch",
- .id = 3,
- .num_resources = ARRAY_SIZE(psw_usl5p_resources),
- .resource = psw_usl5p_resources,
- .dev = {
- .platform_data = &psw3_platform_data,
- },
-};
-
-static struct platform_device *psw_devices[] = {
- &psw_power_switch_device,
- &psw1_switch_device,
- &psw2_switch_device,
- &psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
- return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-device_initcall(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
deleted file mode 100644
index 2c44b94f82fb27..00000000000000
--- a/arch/sh/boards/mach-landisk/setup.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <mach-landisk/mach/iodata_landisk.h>
-#include <asm/io.h>
-
-static void landisk_power_off(void)
-{
- __raw_writeb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "rs5c313",
- .id = -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
- &cf_ide_device,
- &rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
- cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f;
- cf_ide_resources[0].flags = IORESOURCE_IO;
- cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
- cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03;
- cf_ide_resources[1].flags = IORESOURCE_IO;
- cf_ide_resources[2].start = IRQ_FATA;
- cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
- return platform_add_devices(landisk_devices,
- ARRAY_SIZE(landisk_devices));
-}
-
-device_initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
- /* I/O port identity mapping */
- __set_io_port_base(0);
-
- /* LED ON */
- __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
-
- printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
- pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
- .mv_name = "LANDISK",
- .mv_setup = landisk_setup,
- .mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/mach-lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
deleted file mode 100644
index 0fbd0822911a49..00000000000000
--- a/arch/sh/boards/mach-lboxre2/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the L-BOX RE2 specific parts of the kernel
-# Copyright (c) 2007 Nobuhiro Iwamatsu
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
deleted file mode 100644
index a250e3b9019de1..00000000000000
--- a/arch/sh/boards/mach-lboxre2/irq.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lboxre2/irq.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach/lboxre2.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_lboxre2_IRQ(void)
-{
- make_imask_irq(IRQ_CF1);
- make_imask_irq(IRQ_CF0);
- make_imask_irq(IRQ_INTD);
- make_imask_irq(IRQ_ETH1);
- make_imask_irq(IRQ_ETH0);
- make_imask_irq(IRQ_INTA);
-}
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
deleted file mode 100644
index 20d01b430f2a81..00000000000000
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/lbox/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 Support
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <asm/addrspace.h>
-#include <mach/lboxre2.h>
-#include <asm/io.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRQ_CF0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *lboxre2_devices[] __initdata = {
- &cf_ide_device,
-};
-
-static int __init lboxre2_devices_setup(void)
-{
- u32 cf0_io_base; /* Boot CF base address */
- pgprot_t prot;
- unsigned long paddrbase, psize;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void*)PA_AREA5_IO);
- psize = PAGE_SIZE;
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
- if (!cf0_io_base) {
- printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
- return -ENOMEM;
- }
-
- cf_ide_resources[0].start += cf0_io_base ;
- cf_ide_resources[0].end += cf0_io_base ;
- cf_ide_resources[1].start += cf0_io_base ;
- cf_ide_resources[1].end += cf0_io_base ;
-
- return platform_add_devices(lboxre2_devices,
- ARRAY_SIZE(lboxre2_devices));
-
-}
-device_initcall(lboxre2_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_lboxre2 __initmv = {
- .mv_name = "L-BOX RE2",
- .mv_init_irq = init_lboxre2_IRQ,
-};
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
deleted file mode 100644
index 05c5698dcad025..00000000000000
--- a/arch/sh/boards/mach-microdev/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
deleted file mode 100644
index 2a04f72dd14577..00000000000000
--- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup for the SMSC FDC37C93xAPM
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach/microdev.h>
-
-#define SMSC_CONFIG_PORT_ADDR (0x3F0)
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
-#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
-#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
-#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
-#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
-#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
-#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE 0x03f8
-#define SERIAL2_PRIMARY_BASE 0x02f8
-
-#define MSB(x) ( (x) >> 8 )
-#define LSB(x) ( (x) & 0xff )
-
- /* General-Purpose base address on CPU-board FPGA */
-#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
-
-static int __init smsc_superio_setup(void)
-{
-
- unsigned char devid, devrev;
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-
- if ((devid == 0x30) && (devrev == 0x01))
- printk("SMSC FDC37C93xAPM SuperIO device detected\n");
- else
- return -ENODEV;
-
- /* Select the keyboard device */
- SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
- /* Select the Serial #1 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the Serial #2 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#1 device */
- SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#2 device */
- SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the configuration registers */
- SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
- /* enable the appropriate GPIO pins for IDE functionality:
- * bit[0] In/Out 1==input; 0==output
- * bit[1] Polarity 1==invert; 0==no invert
- * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
- * bit[3:4] Function Select 00==original; 01==Alternate Function #1
- */
- SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
- SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e63dc..00000000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
- /*
- * we need to have a 'safe' address to re-direct all I/O requests
- * that we do not explicitly wish to handle. This safe address
- * must have the following properies:
- *
- * * writes are ignored (no exception)
- * * reads are benign (no side-effects)
- * * accesses of width 1, 2 and 4-bytes are all valid.
- *
- * The Processor Version Register (PVR) has these properties.
- */
-#define PVR 0xff000030 /* Processor Version Register */
-
-
-#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */
-#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */
-#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT 0x10ul
-
-#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */
-#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
-#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
- unsigned long result;
-
- if ((offset >= IO_LAN91C111_BASE) &&
- (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
- /*
- * SMSC LAN91C111 Ethernet chip
- */
- result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
- } else if ((offset >= IO_SUPERIO_BASE) &&
- (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Configuration Registers
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE1_BASE) &&
- (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE1_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if (((offset >= IO_IDE2_BASE) &&
- (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
- (offset == IO_IDE2_MISC)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * IDE #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL1_BASE) &&
- (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #1
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_SERIAL2_BASE) &&
- (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
- /*
- * SMSC FDC37C93xAPM SuperIO chip
- *
- * Serial #2
- */
- result = IO_SUPERIO_PHYS + (offset << 1);
- } else if ((offset >= IO_ISP1161_BASE) &&
- (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
- /*
- * Philips USB ISP1161x chip
- */
- result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
- } else {
- /*
- * safe default.
- */
- printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __func__, offset);
- result = PVR;
- }
-
- return (void __iomem *)result;
-}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
deleted file mode 100644
index dc27492c83d765..00000000000000
--- a/arch/sh/boards/mach-microdev/irq.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
-
-static const struct {
- unsigned char fpgaIrq;
- unsigned char mapped;
- const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
- { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */
- { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */
- { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */
- { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */
- { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */
- { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */
- { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */
- { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */
- { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */
- { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */
- { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */
- { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */
- { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */
- { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */
- { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */
- { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-# error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-# error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-# error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-# error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-# error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-# error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void disable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned int fpgaIrq;
-
- if (irq >= NUM_EXTERNAL_IRQS)
- return;
- if (!fpgaIrqTable[irq].mapped)
- return;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long priorityReg, priorities, pri;
- unsigned int fpgaIrq;
-
- if (unlikely(irq >= NUM_EXTERNAL_IRQS))
- return;
- if (unlikely(!fpgaIrqTable[irq].mapped))
- return;
-
- pri = 15 - irq;
-
- fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
- priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
- /* set priority for the interrupt */
- priorities = __raw_readl(priorityReg);
- priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
- priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
- __raw_writel(priorities, priorityReg);
-
- /* enable interrupts on the FPGA INTC register */
- __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-static struct irq_chip microdev_irq_type = {
- .name = "MicroDev-IRQ",
- .irq_unmask = enable_microdev_irq,
- .irq_mask = disable_microdev_irq,
-};
-
-/* This function sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler(irq, µdev_irq_type, handle_level_irq);
- disable_microdev_irq(irq_get_irq_data(irq));
-}
-
-extern void __init init_microdev_irq(void)
-{
- int i;
-
- /* disable interrupts on the FPGA INTC register */
- __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
- for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
- make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
- volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
- volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
- volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
- volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
- volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
- volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
- volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
- volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
- printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
- printk("FPGA_INTENB = 0x%08x\n", *intenb);
- printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
- printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
- printk("FPGA_INTREQ = 0x%08x\n", *intreq);
- printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
- printk("-------------------------------------------------------------------------------\n");
-}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
deleted file mode 100644
index f4a777fe2d0121..00000000000000
--- a/arch/sh/boards/mach-microdev/setup.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <mach/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x300,
- .end = 0x300 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MICRODEV_LINUX_IRQ_ETHERNET,
- .end = MICRODEV_LINUX_IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
- { S1DREG_MISC, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x00 },
- { S1DREG_GPIO_CNF0, 0x00 },
- { S1DREG_GPIO_CNF1, 0x00 },
- { S1DREG_GPIO_CTL0, 0x00 },
- { S1DREG_GPIO_CTL1, 0x00 },
- { S1DREG_CLK_CNF, 0x02 },
- { S1DREG_LCD_CLK_CNF, 0x01 },
- { S1DREG_CRT_CLK_CNF, 0x03 },
- { S1DREG_MPLUG_CLK_CNF, 0x03 },
- { S1DREG_CPU2MEM_WST_SEL, 0x02 },
- { S1DREG_SDRAM_REF_RATE, 0x03 },
- { S1DREG_SDRAM_TC0, 0x00 },
- { S1DREG_SDRAM_TC1, 0x01 },
- { S1DREG_MEM_CNF, 0x80 },
- { S1DREG_PANEL_TYPE, 0x25 },
- { S1DREG_MOD_RATE, 0x00 },
- { S1DREG_LCD_DISP_HWIDTH, 0x63 },
- { S1DREG_LCD_NDISP_HPER, 0x1e },
- { S1DREG_TFT_FPLINE_START, 0x06 },
- { S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
- { S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
- { S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
- { S1DREG_LCD_NDISP_VPER, 0x00 },
- { S1DREG_TFT_FPFRAME_START, 0x0a },
- { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
- { S1DREG_LCD_DISP_MODE, 0x03 },
- { S1DREG_LCD_MISC, 0x00 },
- { S1DREG_LCD_DISP_START0, 0x00 },
- { S1DREG_LCD_DISP_START1, 0x00 },
- { S1DREG_LCD_DISP_START2, 0x00 },
- { S1DREG_LCD_MEM_OFF0, 0x90 },
- { S1DREG_LCD_MEM_OFF1, 0x01 },
- { S1DREG_LCD_PIX_PAN, 0x00 },
- { S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
- { S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
- { S1DREG_CRT_DISP_HWIDTH, 0x63 },
- { S1DREG_CRT_NDISP_HPER, 0x1f },
- { S1DREG_CRT_HRTC_START, 0x04 },
- { S1DREG_CRT_HRTC_PWIDTH, 0x8f },
- { S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
- { S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
- { S1DREG_CRT_NDISP_VPER, 0x1b },
- { S1DREG_CRT_VRTC_START, 0x00 },
- { S1DREG_CRT_VRTC_PWIDTH, 0x83 },
- { S1DREG_TV_OUT_CTL, 0x10 },
- { S1DREG_CRT_DISP_MODE, 0x05 },
- { S1DREG_CRT_DISP_START0, 0x00 },
- { S1DREG_CRT_DISP_START1, 0x00 },
- { S1DREG_CRT_DISP_START2, 0x00 },
- { S1DREG_CRT_MEM_OFF0, 0x20 },
- { S1DREG_CRT_MEM_OFF1, 0x03 },
- { S1DREG_CRT_PIX_PAN, 0x00 },
- { S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
- { S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
- { S1DREG_LCD_CUR_CTL, 0x00 },
- { S1DREG_LCD_CUR_START, 0x01 },
- { S1DREG_LCD_CUR_XPOS0, 0x00 },
- { S1DREG_LCD_CUR_XPOS1, 0x00 },
- { S1DREG_LCD_CUR_YPOS0, 0x00 },
- { S1DREG_LCD_CUR_YPOS1, 0x00 },
- { S1DREG_LCD_CUR_BCTL0, 0x00 },
- { S1DREG_LCD_CUR_GCTL0, 0x00 },
- { S1DREG_LCD_CUR_RCTL0, 0x00 },
- { S1DREG_LCD_CUR_BCTL1, 0x1f },
- { S1DREG_LCD_CUR_GCTL1, 0x3f },
- { S1DREG_LCD_CUR_RCTL1, 0x1f },
- { S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
- { S1DREG_CRT_CUR_CTL, 0x00 },
- { S1DREG_CRT_CUR_START, 0x01 },
- { S1DREG_CRT_CUR_XPOS0, 0x00 },
- { S1DREG_CRT_CUR_XPOS1, 0x00 },
- { S1DREG_CRT_CUR_YPOS0, 0x00 },
- { S1DREG_CRT_CUR_YPOS1, 0x00 },
- { S1DREG_CRT_CUR_BCTL0, 0x00 },
- { S1DREG_CRT_CUR_GCTL0, 0x00 },
- { S1DREG_CRT_CUR_RCTL0, 0x00 },
- { S1DREG_CRT_CUR_BCTL1, 0x1f },
- { S1DREG_CRT_CUR_GCTL1, 0x3f },
- { S1DREG_CRT_CUR_RCTL1, 0x1f },
- { S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
- { S1DREG_BBLT_CTL0, 0x00 },
- { S1DREG_BBLT_CTL1, 0x00 },
- { S1DREG_BBLT_CC_EXP, 0x00 },
- { S1DREG_BBLT_OP, 0x00 },
- { S1DREG_BBLT_SRC_START0, 0x00 },
- { S1DREG_BBLT_SRC_START1, 0x00 },
- { S1DREG_BBLT_SRC_START2, 0x00 },
- { S1DREG_BBLT_DST_START0, 0x00 },
- { S1DREG_BBLT_DST_START1, 0x00 },
- { S1DREG_BBLT_DST_START2, 0x00 },
- { S1DREG_BBLT_MEM_OFF0, 0x00 },
- { S1DREG_BBLT_MEM_OFF1, 0x00 },
- { S1DREG_BBLT_WIDTH0, 0x00 },
- { S1DREG_BBLT_WIDTH1, 0x00 },
- { S1DREG_BBLT_HEIGHT0, 0x00 },
- { S1DREG_BBLT_HEIGHT1, 0x00 },
- { S1DREG_BBLT_BGC0, 0x00 },
- { S1DREG_BBLT_BGC1, 0x00 },
- { S1DREG_BBLT_FGC0, 0x00 },
- { S1DREG_BBLT_FGC1, 0x00 },
- { S1DREG_LKUP_MODE, 0x00 },
- { S1DREG_LKUP_ADDR, 0x00 },
- { S1DREG_PS_CNF, 0x10 },
- { S1DREG_PS_STATUS, 0x00 },
- { S1DREG_CPU2MEM_WDOGT, 0x00 },
- { S1DREG_COM_DISP_MODE, 0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
- .initregs = s1d13806_initregs,
- .initregssize = ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
- [0] = {
- .start = 0x07200000,
- .end = 0x07200000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x07000000,
- .end = 0x07000000 + SZ_2M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device s1d13806_device = {
- .name = "s1d13806fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(s1d13806_resources),
- .resource = s1d13806_resources,
-
- .dev = {
- .platform_data = &s1d13806_platform_data,
- },
-};
-
-static struct platform_device *microdev_devices[] __initdata = {
- &smc91x_device,
- &s1d13806_device,
-};
-
-static int __init microdev_devices_setup(void)
-{
- return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-device_initcall(microdev_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
- .mv_name = "SH4-202 MicroDev",
- .mv_ioport_map = microdev_ioport_map,
- .mv_init_irq = init_microdev_irq,
-};
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
deleted file mode 100644
index fb64a10e217065..00000000000000
--- a/arch/sh/boards/mach-migor/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_MIGOR
-
-choice
- prompt "Migo-R LCD Panel Board Selection"
- default SH_MIGOR_QVGA
-
-config SH_MIGOR_QVGA
- bool "QVGA (320x240)"
-
-config SH_MIGOR_RTA_WVGA
- bool "RTA WVGA (800x480)"
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
deleted file mode 100644
index c223d759fcb1ee..00000000000000
--- a/arch/sh/boards/mach-migor/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o sdram.o
-obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
deleted file mode 100644
index 4ebf130510bc6e..00000000000000
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for SuperH MigoR Quarter VGA LCD Panel
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
- * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <video/sh_mobile_lcdc.h>
-#include <cpu/sh7722.h>
-#include <mach/migor.h>
-
-/* LCD Module is a PH240320T according to board schematics. This module
- * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
- * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
- * SYS-80 interface configured in 16 bit mode.
- *
- * Index 0: "Device Code Read" returns 0x1505.
- */
-
-static void reset_lcd_module(void)
-{
- gpio_set_value(GPIO_PTH2, 0);
- mdelay(2);
- gpio_set_value(GPIO_PTH2, 1);
- mdelay(1);
-}
-
-/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
-
-static unsigned long adjust_reg18(unsigned short data)
-{
- unsigned long tmp1, tmp2;
-
- tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
- tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
- return tmp1 | tmp2;
-}
-
-static void write_reg(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
-}
-
-static void write_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg, unsigned short data)
-{
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
-}
-
-static unsigned long read_reg16(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short reg)
-{
- unsigned long data;
-
- sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
- data = sys_ops->read_data(sys_ops_handle);
- return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
-}
-
-static void migor_lcd_qvga_seq(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
- unsigned short const *data, int no_data)
-{
- int i;
-
- for (i = 0; i < no_data; i += 2)
- write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
-}
-
-static const unsigned short sync_data[] = {
- 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-};
-
-static const unsigned short magic0_data[] = {
- 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
- 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
- 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
-};
-
-static const unsigned short magic1_data[] = {
- 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
- 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
- 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
- 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
- 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
- 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
- 0x0015, 0x8000,
-};
-
-static const unsigned short magic2_data[] = {
- 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
-};
-
-static const unsigned short magic3_data[] = {
- 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
-};
-
-int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
-{
- unsigned long xres = 320;
- unsigned long yres = 240;
- int k;
-
- reset_lcd_module();
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
-
- if (read_reg16(sohandle, so, 0) != 0x1505)
- return -ENODEV;
-
- pr_info("Migo-R QVGA LCD Module detected.\n");
-
- migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
- write_reg16(sohandle, so, 0x00A4, 0x0001);
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
- mdelay(100);
-
- migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
- write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
- write_reg16(sohandle, so, 0x0051, 0x00ef);
- write_reg16(sohandle, so, 0x0052, 0x0000);
- write_reg16(sohandle, so, 0x0053, xres - 1);
-
- migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
- mdelay(10);
-
- migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
- mdelay(40);
-
- /* clear GRAM to avoid displaying garbage */
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
-
- for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
- write_reg16(sohandle, so, 0x0022, 0x0000);
-
- write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
- write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
- write_reg16(sohandle, so, 0x0007, 0x0173);
- mdelay(40);
-
- /* enable display */
- write_reg(sohandle, so, 0x00, 0x22);
- mdelay(100);
- return 0;
-}
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
deleted file mode 100644
index 3a6bee1270aaf7..00000000000000
--- a/arch/sh/boards/mach-migor/sdram.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Migo-R sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(migor_sdram_enter_start)
-
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-ENTRY(migor_sdram_enter_end)
-
- .balign 4
-ENTRY(migor_sdram_leave_start)
-
- /* SBSC: set auto-refresh mode */
- mov.l 1f, r4
- mov.l @r4, r0
- mov.l 4f, r1
- and r1, r0
- mov.l r0, @r4
- mov.l 6f, r4
- mov.l 8f, r0
- mov.l @r4, r1
- mov #-1, r4
- add r4, r1
- or r1, r0
- mov.l 7f, r1
- mov.l r0, @r1
-
- rts
- nop
-
- .balign 4
-1: .long 0xfe400008 /* SDCR0 */
-4: .long 0xfffffbff
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
deleted file mode 100644
index f60061283c4827..00000000000000
--- a/arch/sh/boards/mach-migor/setup.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- */
-#include <linux/clkdev.h>
-#include <linux/dma-map-ops.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/memblock.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/platnand.h>
-#include <linux/i2c.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smc91x.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/videodev2.h>
-#include <linux/sh_intc.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/drv-intf/renesas-ceu.h>
-#include <media/i2c/ov772x.h>
-#include <media/i2c/tw9910.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-#include <mach/migor.h>
-#include <cpu/sh7722.h>
-
-/* Address IRQ Size Bus Description
- * 0x00000000 64MB 16 NOR Flash (SP29PL256N)
- * 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
- * 0x10000000 IRQ0 16 Ethernet (SMC91C111)
- * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
- * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
- */
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu_dma_membase;
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x10000300,
- .end = 0x1000030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x600), /* IRQ0 */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = {
- 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
- 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
- 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
- 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
- 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = (15 * 1024 * 1024),
- },
- {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
- .width = 2,
- .parts = migor_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x03ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device migor_nor_flash_device = {
- .name = "physmap-flash",
- .resource = migor_nor_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nor_flash_resources),
- .dev = {
- .platform_data = &migor_nor_flash_data,
- },
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
- {
- .name = "nanddata1",
- .offset = 0x0,
- .size = 512 * 1024 * 1024,
- },
- {
- .name = "nanddata2",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024 * 1024,
- },
-};
-
-static void migor_nand_flash_cmd_ctl(struct nand_chip *chip, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00400000);
- else if (ctrl & NAND_ALE)
- writeb(cmd, chip->legacy.IO_ADDR_W + 0x00800000);
- else
- writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct nand_chip *chip)
-{
- return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
-}
-
-static struct platform_nand_data migor_nand_flash_data = {
- .chip = {
- .nr_chips = 1,
- .partitions = migor_nand_flash_partitions,
- .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
- .chip_delay = 20,
- },
- .ctrl = {
- .dev_ready = migor_nand_flash_ready,
- .cmd_ctrl = migor_nand_flash_cmd_ctl,
- },
-};
-
-static struct resource migor_nand_flash_resources[] = {
- [0] = {
- .name = "NAND Flash",
- .start = 0x18000000,
- .end = 0x18ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device migor_nand_flash_device = {
- .name = "gen_nand",
- .resource = migor_nand_flash_resources,
- .num_resources = ARRAY_SIZE(migor_nand_flash_resources),
- .dev = {
- .platform_data = &migor_nand_flash_data,
- }
-};
-
-static const struct fb_videomode migor_lcd_modes[] = {
- {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 64,
- .right_margin = 16,
- .hsync_len = 120,
- .sync = 0,
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .name = "PH240320T",
- .xres = 320,
- .yres = 240,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .sync = FB_SYNC_HOR_HIGH_ACT,
-#endif
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB16,
- .clock_divider = 2,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-#elif defined(CONFIG_SH_MIGOR_QVGA)
- .clock_source = LCDC_CLK_PERIPHERAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = SYS16A,
- .clock_divider = 10,
- .lcd_modes = migor_lcd_modes,
- .num_modes = ARRAY_SIZE(migor_lcd_modes),
- .panel_cfg = {
- .width = 49, /* 2.4 inch */
- .height = 37,
- .setup_sys = migor_lcd_qvga_setup,
- },
- .sys_bus_cfg = {
- .ldmt2r = 0x06000a09,
- .ldmt3r = 0x180e3418,
- /* set 1s delay to encourage fsync() */
- .deferred_io_msec = 1000,
- },
- }
-#endif
-};
-
-static struct resource migor_lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(migor_lcdc_resources),
- .resource = migor_lcdc_resources,
- .dev = {
- .platform_data = &sh_mobile_lcdc_info,
- },
-};
-
-static struct ceu_platform_data ceu_pdata = {
- .num_subdevs = 2,
- .subdevs = {
- { /* [0] = ov772x */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x21,
- },
- { /* [1] = tw9910 */
- .flags = 0,
- .bus_width = 8,
- .bus_shift = 0,
- .i2c_adapter_id = 0,
- .i2c_address = 0x45,
- },
- },
-};
-
-static struct resource migor_ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device migor_ceu_device = {
- .name = "renesas-ceu",
- .id = 0, /* ceu.0 */
- .num_resources = ARRAY_SIZE(migor_ceu_resources),
- .resource = migor_ceu_resources,
- .dev = {
- .platform_data = &ceu_pdata,
- },
-};
-
-/* Powerdown/reset gpios for CEU image sensors */
-static struct gpiod_lookup_table ov7725_gpios = {
- .dev_id = "0-0021",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
- GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
- },
-};
-
-static struct gpiod_lookup_table tw9910_gpios = {
- .dev_id = "0-0045",
- .table = {
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT2, "pdn", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct resource sdhi_cn9_resources[] = {
- [0] = {
- .name = "SDHI",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi_cn9_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
- .resource = sdhi_cn9_resources,
- .dev = {
- .platform_data = &sh7724_sdhi_data,
- },
-};
-
-static struct ov772x_camera_info ov7725_info = {
- .flags = 0,
-};
-
-static struct tw9910_video_info tw9910_info = {
- .buswidth = 8,
- .mpout = TW9910_MPO_FIELD,
-};
-
-static struct i2c_board_info migor_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- },
- {
- I2C_BOARD_INFO("migor_ts", 0x51),
- .irq = evt2irq(0x6c0), /* IRQ6 */
- },
- {
- I2C_BOARD_INFO("wm8978", 0x1a),
- },
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
- {
- I2C_BOARD_INFO("tw9910", 0x45),
- .platform_data = &tw9910_info,
- },
-};
-
-static struct platform_device *migor_devices[] __initdata = {
- &smc91x_eth_device,
- &sh_keysc_device,
- &migor_lcdc_device,
- &migor_nor_flash_device,
- &migor_nand_flash_device,
- &sdhi_cn9_device,
-};
-
-extern char migor_sdram_enter_start;
-extern char migor_sdram_enter_end;
-extern char migor_sdram_leave_start;
-extern char migor_sdram_leave_end;
-
-static int __init migor_devices_setup(void)
-{
- struct clk *video_clk;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
- &migor_sdram_enter_start,
- &migor_sdram_enter_end,
- &migor_sdram_leave_start,
- &migor_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Let D11 LED show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit D12 LED show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
- gpio_request(GPIO_FN_IRQ0, NULL);
- __raw_writel(0x00003400, BSC_CS4BCR);
- __raw_writel(0x00110080, BSC_CS4WCR);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT0, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-
- /* NAND Flash */
- gpio_request(GPIO_FN_CS6A_CE2B, NULL);
- __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
- gpio_request(GPIO_PTA1, NULL);
- gpio_direction_input(GPIO_PTA1);
-
- /* SDHI */
- gpio_request(GPIO_FN_SDHICD, NULL);
- gpio_request(GPIO_FN_SDHIWP, NULL);
- gpio_request(GPIO_FN_SDHID3, NULL);
- gpio_request(GPIO_FN_SDHID2, NULL);
- gpio_request(GPIO_FN_SDHID1, NULL);
- gpio_request(GPIO_FN_SDHID0, NULL);
- gpio_request(GPIO_FN_SDHICMD, NULL);
- gpio_request(GPIO_FN_SDHICLK, NULL);
-
- /* Touch Panel */
- gpio_request(GPIO_FN_IRQ6, NULL);
-
- /* LCD Panel */
-#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDRS, NULL);
- gpio_request(GPIO_FN_LCDCS, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDWR, NULL);
- gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
- gpio_direction_output(GPIO_PTH2, 1);
-#endif
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
-#endif
-
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK2, NULL);
- gpio_request(GPIO_FN_VIO_VD2, NULL);
- gpio_request(GPIO_FN_VIO_HD2, NULL);
- gpio_request(GPIO_FN_VIO_FLD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D15, NULL);
- gpio_request(GPIO_FN_VIO_D14, NULL);
- gpio_request(GPIO_FN_VIO_D13, NULL);
- gpio_request(GPIO_FN_VIO_D12, NULL);
- gpio_request(GPIO_FN_VIO_D11, NULL);
- gpio_request(GPIO_FN_VIO_D10, NULL);
- gpio_request(GPIO_FN_VIO_D9, NULL);
- gpio_request(GPIO_FN_VIO_D8, NULL);
-
- __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
-
- /* SIU: Port B */
- gpio_request(GPIO_FN_SIUBOLR, NULL);
- gpio_request(GPIO_FN_SIUBOBT, NULL);
- gpio_request(GPIO_FN_SIUBISLD, NULL);
- gpio_request(GPIO_FN_SIUBOSLD, NULL);
- gpio_request(GPIO_FN_SIUMCKB, NULL);
-
- /*
- * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
- * output. Need only SIUB, set to output for master mode (table 34.2)
- */
- __raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
-
- /*
- * Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
- * issues on Panel Board V2.1.
- */
- video_clk = clk_get(NULL, "video_clk");
- if (!IS_ERR(video_clk)) {
- clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
- clk_put(video_clk);
- }
-
- /* Add a clock alias for ov7725 xclk source. */
- clk_add_alias(NULL, "0-0021", "video_clk", NULL);
-
- /* Register GPIOs for video sources. */
- gpiod_add_lookup_table(&ov7725_gpios);
- gpiod_add_lookup_table(&tw9910_gpios);
-
- i2c_register_board_info(0, migor_i2c_devices,
- ARRAY_SIZE(migor_i2c_devices));
-
- /* Initialize CEU platform device separately to map memory first */
- device_initialize(&migor_ceu_device.dev);
- dma_declare_coherent_memory(&migor_ceu_device.dev,
- ceu_dma_membase, ceu_dma_membase,
- ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
-
- platform_device_add(&migor_ceu_device);
-
- return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-arch_initcall(migor_devices_setup);
-
-/* Return the board specific boot mode pin configuration */
-static int migor_mode_pins(void)
-{
- /* MD0=1, MD1=1, MD2=0: Clock Mode 3
- * MD3=0: 16-bit Area0 Bus Width
- * MD5=1: Little Endian
- * TSTMD=1, MD8=0: Test Mode Disabled
- */
- return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
-}
-
-/* Reserve a portion of memory for CEU buffers */
-static void __init migor_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
-
- ceu_dma_membase = phys;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_migor __initmv = {
- .mv_name = "Migo-R",
- .mv_mode_pins = migor_mode_pins,
- .mv_mem_reserve = migor_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
deleted file mode 100644
index 21770e668de283..00000000000000
--- a/arch/sh/boards/mach-r2d/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RTS7751R2D
-
-menu "RTS7751R2D Board Revision"
-
-config RTS7751R2D_PLUS
- bool "R2D-PLUS"
- help
- Selecting this option will configure the kernel for R2D-PLUS.
-
- R2D-PLUS is the smaller of the two R2D board versions, equipped
- with a single PCI slot.
-
-config RTS7751R2D_1
- bool "R2D-1"
- help
- Selecting this option will configure the kernel for R2D-1.
-
- R2D-1 is the larger of the two R2D board versions, equipped
- with two PCI slots.
-endmenu
-
-endif
-
diff --git a/arch/sh/boards/mach-r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
deleted file mode 100644
index 7e7ac5e0566211..00000000000000
--- a/arch/sh/boards/mach-r2d/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the RTS7751R2D specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
deleted file mode 100644
index e34f81e9ae813b..00000000000000
--- a/arch/sh/boards/mach-r2d/irq.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/rts7751r2d/irq.c
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
- *
- * Modified for RTS7751R2D by
- * Atom Create Engineering Co., Ltd. 2002.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-
-#define R2D_NR_IRL 13
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources (R2D-1 and R2D-PLUS) */
- EXT, /* EXT_INT0-3 */
- RTC_T, RTC_A, /* Real Time Clock */
- AX88796, /* Ethernet controller (R2D-1 board) */
- KEY, /* Key input (R2D-PLUS board) */
- SDCARD, /* SD Card */
- CF_CD, CF_IDE, /* CF Card Detect + CF IDE */
- SM501, /* SM501 aka Voyager */
- PCI_INTD_RTL8139, /* Ethernet controller */
- PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
- PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
- PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */
- PCI_INTA_SLOT, /* PCI Slot 3.3v */
- TP, /* Touch Panel */
-};
-
-#ifdef CONFIG_RTS7751R2D_1
-
-/* Vectors for R2D-1 */
-static struct intc_vect vectors_r2d_1[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-1 */
-static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, AX88796,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-1 */
-static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
- NULL, mask_registers_r2d_1, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_1 */
-
-#ifdef CONFIG_RTS7751R2D_PLUS
-
-/* Vectors for R2D-PLUS */
-static struct intc_vect vectors_r2d_plus[] __initdata = {
- INTC_IRQ(EXT, IRQ_EXT),
- INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
- INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
- INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
- INTC_IRQ(SM501, IRQ_VOYAGER),
- INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
- INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
- INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
- INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
- INTC_IRQ(TP, IRQ_TP),
-};
-
-/* IRLMSK mask register layout for R2D-PLUS */
-static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
- { 0xa4000000, 0, 16, /* IRLMSK */
- { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
- PCI_INTC_PCI1520, PCI_INTD_RTL8139,
- SM501, CF_IDE, CF_CD, SDCARD, KEY,
- RTC_A, RTC_T, 0, 0, 0, EXT } },
-};
-
-/* IRLn to IRQ table for R2D-PLUS */
-static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
- IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
- IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
- IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
- IRQ_TP,
-};
-
-static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
- NULL, mask_registers_r2d_plus, NULL, NULL);
-
-#endif /* CONFIG_RTS7751R2D_PLUS */
-
-static unsigned char irl2irq[R2D_NR_IRL];
-
-int rts7751r2d_irq_demux(int irq)
-{
- if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
- return irq;
-
- return irl2irq[irq];
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_rts7751r2d_IRQ(void)
-{
- struct intc_desc *d;
-
- switch (__raw_readw(PA_VERREG) & 0xf0) {
-#ifdef CONFIG_RTS7751R2D_PLUS
- case 0x10:
- printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
- d = &intc_desc_r2d_plus;
- memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
- break;
-#endif
-#ifdef CONFIG_RTS7751R2D_1
- case 0x00: /* according to manual */
- case 0x30: /* in reality */
- printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
- d = &intc_desc_r2d_1;
- memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
- break;
-#endif
- default:
- printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
- __raw_readw(PA_VERREG));
- return;
- }
-
- register_intc_controller(d);
-}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
deleted file mode 100644
index 3bc52f651d9611..00000000000000
--- a/arch/sh/boards/mach-r2d/setup.c
+++ /dev/null
@@ -1,305 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Sales RTS7751R2D Support.
- *
- * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ata_platform.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <asm/machvec.h>
-#include <mach/r2d.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-#include <asm/spi.h>
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c,
- .flags = IORESOURCE_MEM,
- },
-#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
- [2] = {
- .start = IRQ_CF_IDE,
- .flags = IORESOURCE_IRQ,
- },
-#endif
-};
-
-static struct pata_platform_info pata_info = {
- .ioport_shift = 1,
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
- .dev = {
- .platform_data = &pata_info,
- },
-};
-
-static struct spi_board_info spi_bus[] = {
- {
- .modalias = "rtc-r9701",
- .max_speed_hz = 1000000,
- .mode = SPI_MODE_3,
- },
-};
-
-static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
-{
- BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
- __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
-}
-
-static struct sh_spi_info spi_info = {
- .num_chipselect = 1,
- .chip_select = r2d_chip_select,
-};
-
-static struct resource spi_sh_sci_resources[] = {
- {
- .start = 0xffe00000,
- .end = 0xffe0001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device spi_sh_sci_device = {
- .name = "spi_sh_sci",
- .id = -1,
- .num_resources = ARRAY_SIZE(spi_sh_sci_resources),
- .resource = spi_sh_sci_resources,
- .dev = {
- .platform_data = &spi_info,
- },
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OUTPORT,
- .end = PA_OUTPORT,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x13e00000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x13e00000,
- .end = 0x13ffffff,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_VOYAGER,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode = {
- .pixclock = 35714,
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .upper_margin = 35,
- .lower_margin = 0,
- .hsync_len = 96,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .flags = (SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT),
-
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
- .flags = SM501_FBPD_SWAP_FB_ENDIAN,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct mtd_partition r2d_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Environment",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(r2d_partitions),
- .parts = r2d_partitions,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x02000000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rts7751r2d_devices[] __initdata = {
- &sm501_device,
- &heartbeat_device,
- &spi_sh_sci_device,
-};
-
-/*
- * The CF is connected with a 16-bit bus where 8-bit operations are
- * unsupported. The linux ata driver is however using 8-bit operations, so
- * insert a trapped io filter to convert 8-bit operations into 16-bit.
- */
-static struct trapped_io cf_trapped_io = {
- .resource = cf_ide_resources,
- .num_resources = 2,
- .minimum_bus_width = 16,
-};
-
-static int __init rts7751r2d_devices_setup(void)
-{
- if (register_trapped_io(&cf_trapped_io) == 0)
- platform_device_register(&cf_ide_device);
-
- if (mach_is_r2d_plus())
- platform_device_register(&flash_device);
-
- spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
-
- return platform_add_devices(rts7751r2d_devices,
- ARRAY_SIZE(rts7751r2d_devices));
-}
-device_initcall(rts7751r2d_devices_setup);
-
-static void rts7751r2d_power_off(void)
-{
- __raw_writew(0x0001, PA_POWOFF);
-}
-
-/*
- * Initialize the board
- */
-static void __init rts7751r2d_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
- u16 ver = __raw_readw(PA_VERREG);
-
- printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
-
- printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
- (ver >> 4) & 0xf, ver & 0xf);
-
- __raw_writew(0x0000, PA_OUTPORT);
- pm_power_off = rts7751r2d_power_off;
-
- /* sm501 dram configuration:
- * ColSizeX = 11 - External Memory Column Size: 256 words.
- * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
- * RstX = 1 - External Memory Reset: Normal.
- * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
- * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks.
- * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
- * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
- * Rst = 1 - Internal Memory Reset: Normal.
- * RA = 1 - Internal Memory Remain in Active State: Do not remain.
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rts7751r2d __initmv = {
- .mv_name = "RTS7751R2D",
- .mv_setup = rts7751r2d_setup,
- .mv_init_irq = init_rts7751r2d_IRQ,
- .mv_irq_demux = rts7751r2d_irq_demux,
-};
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
deleted file mode 100644
index f0299bc4416f80..00000000000000
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_RSK
-
-choice
- prompt "RSK+ options"
- default SH_RSK7203
-
-config SH_RSK7201
- bool "RSK7201"
- depends on CPU_SUBTYPE_SH7201
-
-config SH_RSK7203
- bool "RSK7203"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7203
-
-config SH_RSK7264
- bool "RSK2+SH7264"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7264
-
-config SH_RSK7269
- bool "RSK2+SH7269"
- select GPIOLIB
- depends on CPU_SUBTYPE_SH7269
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
deleted file mode 100644
index 43cca39a9fe612..00000000000000
--- a/arch/sh/boards/mach-rsk/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o
-obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o
-obj-$(CONFIG_SH_RSK7264) += devices-rsk7264.o
-obj-$(CONFIG_SH_RSK7269) += devices-rsk7269.o
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
deleted file mode 100644
index e6b05d4588b7b9..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ 7203 Support.
- *
- * Copyright (C) 2008 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <cpu/sh7203.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct gpio_led rsk7203_gpio_leds[] = {
- {
- .name = "green",
- .gpio = GPIO_PE10,
- .active_low = 1,
- }, {
- .name = "orange",
- .default_trigger = "nand-disk",
- .gpio = GPIO_PE12,
- .active_low = 1,
- }, {
- .name = "red:timer",
- .default_trigger = "timer",
- .gpio = GPIO_PC14,
- .active_low = 1,
- }, {
- .name = "red:heartbeat",
- .default_trigger = "heartbeat",
- .gpio = GPIO_PE11,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
- .leds = rsk7203_gpio_leds,
- .num_leds = ARRAY_SIZE(rsk7203_gpio_leds),
-};
-
-static struct platform_device led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rsk7203_gpio_leds_info,
- },
-};
-
-static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
- {
- .code = BTN_0,
- .gpio = GPIO_PB0,
- .active_low = 1,
- .desc = "SW1",
- }, {
- .code = BTN_1,
- .gpio = GPIO_PB1,
- .active_low = 1,
- .desc = "SW2",
- }, {
- .code = BTN_2,
- .gpio = GPIO_PB2,
- .active_low = 1,
- .desc = "SW3",
- },
-};
-
-static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
- .buttons = rsk7203_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table),
- .poll_interval = 50, /* default to 50ms */
-};
-
-static struct platform_device keys_device = {
- .name = "gpio-keys-polled",
- .dev = {
- .platform_data = &rsk7203_gpio_keys_info,
- },
-};
-
-static struct platform_device *rsk7203_devices[] __initdata = {
- &smsc911x_device,
- &led_device,
- &keys_device,
-};
-
-static int __init rsk7203_devices_setup(void)
-{
- /* Select pins for SCIF0 */
- gpio_request(GPIO_FN_TXD0, NULL);
- gpio_request(GPIO_FN_RXD0, NULL);
-
- /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
- __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
- gpio_request(GPIO_FN_IRQ0_PB, NULL);
-
- return platform_add_devices(rsk7203_devices,
- ARRAY_SIZE(rsk7203_devices));
-}
-device_initcall(rsk7203_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7264.c b/arch/sh/boards/mach-rsk/devices-rsk7264.c
deleted file mode 100644
index eaf700a20b833e..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7264.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7264 Support.
- *
- * Copyright (C) 2012 Renesas Electronics Europe
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x28000000,
- .end = 0x280000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 65,
- .end = 65,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7264_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7264_devices_setup(void)
-{
- return platform_add_devices(rsk7264_devices,
- ARRAY_SIZE(rsk7264_devices));
-}
-device_initcall(rsk7264_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c
deleted file mode 100644
index 4b1e386b51dd64..00000000000000
--- a/arch/sh/boards/mach-rsk/devices-rsk7269.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * RSK+SH7269 Support
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x240000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct platform_device *rsk7269_devices[] __initdata = {
- &smsc911x_device,
-};
-
-static int __init rsk7269_devices_setup(void)
-{
- return platform_add_devices(rsk7269_devices,
- ARRAY_SIZE(rsk7269_devices));
-}
-device_initcall(rsk7269_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
deleted file mode 100644
index 9370c4fdc41e13..00000000000000
--- a/arch/sh/boards/mach-rsk/setup.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe RSK+ Support.
- *
- * Copyright (C) 2008 Paul Mundt
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct mtd_partition rsk_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .parts = rsk_partitions,
- .nr_parts = ARRAY_SIZE(rsk_partitions),
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x20000000,
- .end = 0x20400000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct platform_device *rsk_devices[] __initdata = {
- &flash_device,
-};
-
-static int __init rsk_devices_setup(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- return platform_add_devices(rsk_devices,
- ARRAY_SIZE(rsk_devices));
-}
-device_initcall(rsk_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk __initmv = {
- .mv_name = "RSK+",
-};
diff --git a/arch/sh/boards/mach-sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
deleted file mode 100644
index d4392efd2f74db..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if SH_SDK7780
-
-choice
- prompt "SDK7780 options"
- default SH_SDK7780_BASE
-
-config SH_SDK7780_BASE
- bool "SDK7780 with base-board support"
- depends on CPU_SUBTYPE_SH7780
- help
- Selecting this option will enable support for the expansion
- baseboard devices. If in doubt, say Y.
-
-endchoice
-
-endif
diff --git a/arch/sh/boards/mach-sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
deleted file mode 100644
index 37e857f9a55a26..00000000000000
--- a/arch/sh/boards/mach-sdk7780/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SDK7780 specific parts of the kernel
-#
-obj-y := setup.o irq.o
-
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
deleted file mode 100644
index fa392f3dce266b..00000000000000
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sdk7780/irq.c
- *
- * Renesas Technology Europe SDK7780 Support.
- *
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/sdk7780.h>
-
-enum {
- UNUSED = 0,
- /* board specific interrupt sources */
- SMC91C111, /* Ethernet controller */
-};
-
-static struct intc_vect fpga_vectors[] __initdata = {
- INTC_IRQ(SMC91C111, IRQ_ETHERNET),
-};
-
-static struct intc_mask_reg fpga_mask_registers[] __initdata = {
- { 0, FPGA_IRQ0MR, 16,
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
- NULL, fpga_mask_registers, NULL, NULL);
-
-void __init init_sdk7780_IRQ(void)
-{
- printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
-
- __raw_writew(0xFFFF, FPGA_IRQ0MR);
- /* Setup IRL 0-3 */
- __raw_writew(0x0003, FPGA_IMSR);
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- register_intc_controller(&fpga_intc_desc);
-}
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
deleted file mode 100644
index 482761b780e406..00000000000000
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/renesas/sdk7780/setup.c
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/machvec.h>
-#include <mach/sdk7780.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#define GPIO_PECR 0xFFEA0008
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ETHERNET,
- .end = IRQ_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *sdk7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init sdk7780_devices_setup(void)
-{
- return platform_add_devices(sdk7780_devices,
- ARRAY_SIZE(sdk7780_devices));
-}
-device_initcall(sdk7780_devices_setup);
-
-static void __init sdk7780_setup(char **cmdline_p)
-{
- u16 ver = __raw_readw(FPGA_FPVERR);
- u16 dateStamp = __raw_readw(FPGA_FPDATER);
-
- printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
- printk(KERN_INFO "Board version: %d (revision %d), "
- "FPGA version: %d (revision %d), datestamp : %d\n",
- (ver >> 12) & 0xf, (ver >> 8) & 0xf,
- (ver >> 4) & 0xf, ver & 0xf,
- dateStamp);
-
- /* Setup pin mux'ing for PCIC */
- __raw_writew(0x0000, GPIO_PECR);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Renesas SDK7780-R3" ,
- .mv_setup = sdk7780_setup,
- .mv_init_irq = init_sdk7780_IRQ,
-};
-
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
deleted file mode 100644
index 731a87c694b3bc..00000000000000
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := fpga.o irq.o nmi.o setup.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
deleted file mode 100644
index a37e1e88c6b1f2..00000000000000
--- a/arch/sh/boards/mach-sdk7786/fpga.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/bcd.h>
-#include <mach/fpga.h>
-#include <linux/sizes.h>
-
-#define FPGA_REGS_OFFSET 0x03fff800
-#define FPGA_REGS_SIZE 0x490
-
-/*
- * The FPGA can be mapped in any of the generally available areas,
- * so we attempt to scan for it using the fixed SRSTR read magic.
- *
- * Once the FPGA is located, the rest of the mapping data for the other
- * components can be determined dynamically from its section mapping
- * registers.
- */
-static void __iomem *sdk7786_fpga_probe(void)
-{
- unsigned long area;
- void __iomem *base;
-
- /*
- * Iterate over all of the areas where the FPGA could be mapped.
- * The possible range is anywhere from area 0 through 6, area 7
- * is reserved.
- */
- for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
- base = ioremap(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
- if (!base) {
- /* Failed to remap this area, move along. */
- continue;
- }
-
- if (ioread16(base + SRSTR) == SRSTR_MAGIC)
- return base; /* Found it! */
-
- iounmap(base);
- }
-
- return NULL;
-}
-
-void __iomem *sdk7786_fpga_base;
-
-void __init sdk7786_fpga_init(void)
-{
- u16 version, date;
-
- sdk7786_fpga_base = sdk7786_fpga_probe();
- if (unlikely(!sdk7786_fpga_base)) {
- panic("FPGA detection failed.\n");
- return;
- }
-
- version = fpga_read_reg(FPGAVR);
- date = fpga_read_reg(FPGADR);
-
- pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
- bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
- ((date >> 12) & 0xf) + 2000,
- (date >> 8) & 0xf, bcd2bin(date & 0xff));
-}
diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c
deleted file mode 100644
index c4587d1013e611..00000000000000
--- a/arch/sh/boards/mach-sdk7786/gpio.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA USRGPIR Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <mach/fpga.h>
-
-#define NR_FPGA_GPIOS 8
-
-static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
- "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
-};
-
-static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- /* always in */
- return 0;
-}
-
-static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
-}
-
-static struct gpio_chip usrgpir_gpio_chip = {
- .label = "sdk7786-fpga",
- .names = usrgpir_gpio_names,
- .direction_input = usrgpir_gpio_direction_input,
- .get = usrgpir_gpio_get,
- .base = -1, /* don't care */
- .ngpio = NR_FPGA_GPIOS,
-};
-
-static int __init usrgpir_gpio_setup(void)
-{
- return gpiochip_add_data(&usrgpir_gpio_chip, NULL);
-}
-device_initcall(usrgpir_gpio_setup);
diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c
deleted file mode 100644
index 340c306ea95239..00000000000000
--- a/arch/sh/boards/mach-sdk7786/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA IRQ Controller Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-
-enum {
- ATA_IRQ_BIT = 1,
- SPI_BUSY_BIT = 2,
- LIRQ5_BIT = 3,
- LIRQ6_BIT = 4,
- LIRQ7_BIT = 5,
- LIRQ8_BIT = 6,
- KEY_IRQ_BIT = 7,
- PEN_IRQ_BIT = 8,
- ETH_IRQ_BIT = 9,
- RTC_ALARM_BIT = 10,
- CRYSTAL_FAIL_BIT = 12,
- ETH_PME_BIT = 14,
-};
-
-void __init sdk7786_init_irq(void)
-{
- unsigned int tmp;
-
- /* Enable priority encoding for all IRLs */
- fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
-
- /* Clear FPGA interrupt status registers */
- fpga_write_reg(0x0000, INTASR);
- fpga_write_reg(0x0000, INTBSR);
-
- /* Unmask FPGA interrupts */
- tmp = fpga_read_reg(INTAMR);
- tmp &= ~(1 << ETH_IRQ_BIT);
- fpga_write_reg(tmp, INTAMR);
-
- plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
- plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
-}
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
deleted file mode 100644
index afba49679a1219..00000000000000
--- a/arch/sh/boards/mach-sdk7786/nmi.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA NMI Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-
-enum {
- NMI_MODE_MANUAL,
- NMI_MODE_AUX,
- NMI_MODE_MASKED,
- NMI_MODE_ANY,
- NMI_MODE_UNKNOWN,
-};
-
-/*
- * Default to the manual NMI switch.
- */
-static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
-
-static int __init nmi_mode_setup(char *str)
-{
- if (!str)
- return 0;
-
- if (strcmp(str, "manual") == 0)
- nmi_mode = NMI_MODE_MANUAL;
- else if (strcmp(str, "aux") == 0)
- nmi_mode = NMI_MODE_AUX;
- else if (strcmp(str, "masked") == 0)
- nmi_mode = NMI_MODE_MASKED;
- else if (strcmp(str, "any") == 0)
- nmi_mode = NMI_MODE_ANY;
- else {
- nmi_mode = NMI_MODE_UNKNOWN;
- pr_warn("Unknown NMI mode %s\n", str);
- }
-
- printk("Set NMI mode to %d\n", nmi_mode);
- return 0;
-}
-early_param("nmi_mode", nmi_mode_setup);
-
-void __init sdk7786_nmi_init(void)
-{
- unsigned int source, mask, tmp;
-
- switch (nmi_mode) {
- case NMI_MODE_MANUAL:
- source = NMISR_MAN_NMI;
- mask = NMIMR_MAN_NMIM;
- break;
- case NMI_MODE_AUX:
- source = NMISR_AUX_NMI;
- mask = NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_ANY:
- source = NMISR_MAN_NMI | NMISR_AUX_NMI;
- mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
- break;
- case NMI_MODE_MASKED:
- case NMI_MODE_UNKNOWN:
- default:
- source = mask = 0;
- break;
- }
-
- /* Set the NMI source */
- tmp = fpga_read_reg(NMISR);
- tmp &= ~NMISR_MASK;
- tmp |= source;
- fpga_write_reg(tmp, NMISR);
-
- /* And the IRQ masking */
- fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
-}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
deleted file mode 100644
index d183026dbeb19a..00000000000000
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas Technology Europe SDK7786 Support.
- *
- * Copyright (C) 2010 Matt Fleming
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <mach/fpga.h>
-#include <mach/irq.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-#include <linux/sizes.h>
-#include <asm/clock.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resource = {
- .start = 0x07fff8b0,
- .end = 0x07fff8b0 + sizeof(u16) - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc911x_resources[] = {
- [0] = {
- .name = "smsc911x-memory",
- .start = 0x07ffff00,
- .end = 0x07ffff00 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "smsc911x-irq",
- .start = evt2irq(0x2c0),
- .end = evt2irq(0x2c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct resource smbus_fpga_resource = {
- .start = 0x07fff9e0,
- .end = 0x07fff9e0 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_fpga_device = {
- .name = "i2c-sdk7786",
- .id = 0,
- .num_resources = 1,
- .resource = &smbus_fpga_resource,
-};
-
-static struct resource smbus_pcie_resource = {
- .start = 0x07fffc30,
- .end = 0x07fffc30 + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device smbus_pcie_device = {
- .name = "i2c-sdk7786",
- .id = 1,
- .num_resources = 1,
- .resource = &smbus_pcie_resource,
-};
-
-static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
- {
- I2C_BOARD_INFO("max6900", 0x68),
- },
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &heartbeat_device,
- &smsc911x_device,
- &smbus_fpga_device,
- &smbus_pcie_device,
-};
-
-static int sdk7786_i2c_setup(void)
-{
- unsigned int tmp;
-
- /*
- * Hand over I2C control to the FPGA.
- */
- tmp = fpga_read_reg(SBCR);
- tmp &= ~SCBR_I2CCEN;
- tmp |= SCBR_I2CMEN;
- fpga_write_reg(tmp, SBCR);
-
- return i2c_register_board_info(0, sdk7786_i2c_devices,
- ARRAY_SIZE(sdk7786_i2c_devices));
-}
-
-static int __init sdk7786_devices_setup(void)
-{
- int ret;
-
- ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return sdk7786_i2c_setup();
-}
-device_initcall(sdk7786_devices_setup);
-
-static int sdk7786_mode_pins(void)
-{
- return fpga_read_reg(MODSWR);
-}
-
-/*
- * FPGA-driven PCIe clocks
- *
- * Historically these include the oscillator, clock B (slots 2/3/4) and
- * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
- * everything under a single PCIe clocks enable bit that happens to map
- * to the same bit position as the oscillator bit for earlier FPGA
- * versions.
- *
- * Given that the legacy clocks have the side-effect of shutting the CPU
- * off through the FPGA along with the PCI slots, we simply leave them in
- * their initial state and don't bother registering them with the clock
- * framework.
- */
-static int sdk7786_pcie_clk_enable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
- return 0;
-}
-
-static void sdk7786_pcie_clk_disable(struct clk *clk)
-{
- fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
-}
-
-static struct sh_clk_ops sdk7786_pcie_clk_ops = {
- .enable = sdk7786_pcie_clk_enable,
- .disable = sdk7786_pcie_clk_disable,
-};
-
-static struct clk sdk7786_pcie_clk = {
- .ops = &sdk7786_pcie_clk_ops,
-};
-
-static struct clk_lookup sdk7786_pcie_cl = {
- .con_id = "pcie_plat_clk",
- .clk = &sdk7786_pcie_clk,
-};
-
-static int sdk7786_clk_init(void)
-{
- struct clk *clk;
- int ret;
-
- /*
- * Only handle the EXTAL case, anyone interfacing a crystal
- * resonator will need to provide their own input clock.
- */
- if (test_mode_pin(MODE_PIN9))
- return -EINVAL;
-
- clk = clk_get(NULL, "extal");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- ret = clk_set_rate(clk, 33333333);
- clk_put(clk);
-
- /*
- * Setup the FPGA clocks.
- */
- ret = clk_register(&sdk7786_pcie_clk);
- if (unlikely(ret)) {
- pr_err("FPGA clock registration failed\n");
- return ret;
- }
-
- clkdev_add(&sdk7786_pcie_cl);
-
- return 0;
-}
-
-static void sdk7786_restart(char *cmd)
-{
- fpga_write_reg(0xa5a5, SRSTR);
-}
-
-static void sdk7786_power_off(void)
-{
- fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
-
- /*
- * It can take up to 20us for the R8C to do its job, back off and
- * wait a bit until we've been shut off. Even though newer FPGA
- * versions don't set the ACK bit, the latency issue remains.
- */
- while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
- cpu_sleep();
-}
-
-/* Initialize the board */
-static void __init sdk7786_setup(char **cmdline_p)
-{
- pr_info("Renesas Technology Europe SDK7786 support:\n");
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- sdk7786_fpga_init();
- sdk7786_nmi_init();
-
- pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
-
- machine_ops.restart = sdk7786_restart;
- pm_power_off = sdk7786_power_off;
-
- register_smp_ops(&shx3_smp_ops);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sdk7786 __initmv = {
- .mv_name = "SDK7786",
- .mv_setup = sdk7786_setup,
- .mv_mode_pins = sdk7786_mode_pins,
- .mv_clk_init = sdk7786_clk_init,
- .mv_init_irq = sdk7786_init_irq,
-};
diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c
deleted file mode 100644
index 7c6ca976f332fe..00000000000000
--- a/arch/sh/boards/mach-sdk7786/sram.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA SRAM Support.
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <mach/fpga.h>
-#include <asm/sram.h>
-#include <linux/sizes.h>
-
-static int __init fpga_sram_init(void)
-{
- unsigned long phys;
- unsigned int area;
- void __iomem *vaddr;
- int ret;
- u16 data;
-
- /* Enable FPGA SRAM */
- data = fpga_read_reg(LCLASR);
- data |= LCLASR_FRAMEN;
- fpga_write_reg(data, LCLASR);
-
- /*
- * FPGA_SEL determines the area mapping
- */
- area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
- if (unlikely(area == LCLASR_AREA_MASK)) {
- pr_err("FPGA memory unmapped.\n");
- return -ENXIO;
- }
-
- /*
- * The memory itself occupies a 2KiB range at the top of the area
- * immediately below the system registers.
- */
- phys = (area << 26) + SZ_64M - SZ_4K;
-
- /*
- * The FPGA SRAM resides in translatable physical space, so set
- * up a mapping prior to inserting it in to the pool.
- */
- vaddr = ioremap(phys, SZ_2K);
- if (unlikely(!vaddr)) {
- pr_err("Failed remapping FPGA memory.\n");
- return -ENXIO;
- }
-
- pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
- "(area %d) to pool.\n",
- SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
-
- ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
- if (unlikely(ret < 0)) {
- pr_err("Failed adding memory\n");
- iounmap(vaddr);
- return ret;
- }
-
- return 0;
-}
-postcore_initcall(fpga_sram_init);
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
deleted file mode 100644
index b40b30853ce376..00000000000000
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7206 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
deleted file mode 100644
index 2b15370829aef3..00000000000000
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <mach-se/mach/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL 0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1 0xfffe0802
-
-static void disable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set the priority in IPR to 0 */
- val = __raw_readw(INTC_IPR01);
- val &= mask;
- __raw_writew(val, INTC_IPR01);
- /* FPGA mask set */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 |= 0x0010;
- break;
- case IRQ1_IRQ:
- msk0 |= 0x000f;
- break;
- case IRQ3_IRQ:
- msk0 |= 0x0f00;
- msk1 |= 0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short val;
- unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set priority in IPR back to original value */
- val = __raw_readw(INTC_IPR01);
- val |= value;
- __raw_writew(val, INTC_IPR01);
-
- /* FPGA mask reset */
- msk0 = __raw_readw(INTMSK0);
- msk1 = __raw_readw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- msk0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- msk0 &= ~0x0f00;
- msk1 &= ~0x00ff;
- break;
- }
- __raw_writew(msk0, INTMSK0);
- __raw_writew(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(struct irq_data *data)
-{
- unsigned short sts0,sts1;
- unsigned int irq = data->irq;
-
- if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
- enable_se7206_irq(data);
- /* FPGA isr clear */
- sts0 = __raw_readw(INTSTS0);
- sts1 = __raw_readw(INTSTS1);
-
- switch (irq) {
- case IRQ0_IRQ:
- sts0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- sts0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- sts0 &= ~0x0f00;
- sts1 &= ~0x00ff;
- break;
- }
- __raw_writew(sts0, INTSTS0);
- __raw_writew(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
- .name = "SE7206-FPGA",
- .irq_mask = disable_se7206_irq,
- .irq_unmask = enable_se7206_irq,
- .irq_eoi = eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
- handle_level_irq, "level");
- disable_se7206_irq(irq_get_irq_data(irq));
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
- make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
- make_se7206_irq(IRQ1_IRQ); /* ATA */
- make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-
- __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
-
- /* FPGA System register setup*/
- __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
- __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
-
- /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- __raw_writew(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
deleted file mode 100644
index dc55d3a69665ee..00000000000000
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2007 - 2008 Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <mach-se/mach/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = PA_SMSC + 0x300,
- .end = PA_SMSC + 0x300 + 0x020 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
- &smc91x_device,
- &heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
- return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-device_initcall(se7206_devices_setup);
-
-static int se7206_mode_pins(void)
-{
- return MODE_PIN1 | MODE_PIN2;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_init_irq = init_se7206_IRQ,
- .mv_mode_pins = se7206_mode_pins,
-};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
deleted file mode 100644
index e058661091a26f..00000000000000
--- a/arch/sh/boards/mach-se/7343/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7343 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
deleted file mode 100644
index f9f3b14f70d574..00000000000000
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- * Copyright (C) 2012 Paul Mundt
- *
- * Based on linux/arch/sh/boards/se/7343/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#define DRV_NAME "SE7343-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7343.h>
-
-#define PA_CPLD_BASE_ADDR 0x11400000
-#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
-#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-
-static void __iomem *se7343_irq_regs;
-struct irq_domain *se7343_irq_domain;
-
-static void se7343_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
-
- for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7343_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7343_domain_init(void)
-{
- int i;
-
- se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7343_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7343_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7343_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7343_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = PA_CPLD_IMSK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
- irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
-{
- se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
- if (unlikely(!se7343_irq_regs)) {
- pr_err("Failed to remap CPLD\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7343_domain_init();
- se7343_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
deleted file mode 100644
index fe0e550601a2e2..00000000000000
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/usb/isp116x.h>
-#include <linux/delay.h>
-#include <linux/irqdomain.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7343.h>
-#include <asm/heartbeat.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 128 * 1024,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 31 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
-
-static struct plat_serial8250_port serial_platform_data[] = {
- [0] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x16000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- [1] = {
- .iotype = UPIO_MEM,
- .mapbase = 0x17000000,
- .regshift = 1,
- .flags = ST16C2550C_FLAGS,
- .uartclk = 7372800,
- },
- { },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static void isp116x_delay(struct device *dev, int delay)
-{
- ndelay(delay);
-}
-
-static struct resource usb_resources[] = {
- [0] = {
- .start = 0x11800000,
- .end = 0x11800001,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x11800002,
- .end = 0x11800003,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp116x_platform_data usb_platform_data = {
- .sel15Kres = 1,
- .oc_enable = 1,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_enable = 0,
- .delay = isp116x_delay,
-};
-
-static struct platform_device usb_device = {
- .name = "isp116x-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(usb_resources),
- .resource = usb_resources,
- .dev = {
- .platform_data = &usb_platform_data,
- },
-
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &uart_device,
- &usb_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
- /* Wire-up dynamic vectors */
- serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTA);
- serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
- SE7343_FPGA_IRQ_UARTB);
- usb_resources[2].start = usb_resources[2].end =
- irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
-
- return platform_add_devices(sh7343se_platform_devices,
- ARRAY_SIZE(sh7343se_platform_devices));
-}
-device_initcall(sh7343se_devices_setup);
-
-/*
- * Initialize the board
- */
-static void __init sh7343se_setup(char **cmdline_p)
-{
- __raw_writew(0xf900, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- __raw_writew(0x0020, PORT_PSELD);
-
- printk(KERN_INFO "MS7343CP01 Setup...done\n");
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
- .mv_name = "SolutionEngine 7343",
- .mv_setup = sh7343se_setup,
- .mv_init_irq = init_7343se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
deleted file mode 100644
index 900d93cfb6a531..00000000000000
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 770x SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
deleted file mode 100644
index 66e2c8aa0b69f3..00000000000000
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- /* This is default value */
- { 13, 0, 8, 0x0f-13, },
- { 5 , 0, 4, 0x0f- 5, },
- { 10, 1, 0, 0x0f-10, },
- { 7 , 2, 4, 0x0f- 7, },
- { 3 , 2, 0, 0x0f- 3, },
- { 1 , 3, 12, 0x0f- 1, },
- { 12, 3, 4, 0x0f-12, }, /* LAN */
- { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */
- { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */
- { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */
- { 0 , 5, 12, 0x0f , },
- { 4 , 5, 4, 0x0f- 4, },
- { 8 , 6, 12, 0x0f- 8, },
- { 9 , 6, 8, 0x0f- 9, },
- { 11, 6, 4, 0x0f-11, },
-#else
- { 14, 0, 8, 0x0f-14, },
- { 12, 0, 4, 0x0f-12, },
- { 8, 1, 4, 0x0f- 8, },
- { 6, 2, 12, 0x0f- 6, },
- { 5, 2, 8, 0x0f- 5, },
- { 4, 2, 4, 0x0f- 4, },
- { 3, 2, 0, 0x0f- 3, },
- { 1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
- /* ST NIC */
- { 10, 3, 4, 0x0f-10, }, /* LAN */
-#endif
- /* MRSHPC IRQs setting */
- { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */
- { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */
- { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */
- { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */
- { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
- .chip = {
- .name = "IPR-se770x",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
- /* Disable all interrupts */
- __raw_writew(0, BCR_ILCRA);
- __raw_writew(0, BCR_ILCRB);
- __raw_writew(0, BCR_ILCRC);
- __raw_writew(0, BCR_ILCRD);
- __raw_writew(0, BCR_ILCRE);
- __raw_writew(0, BCR_ILCRF);
- __raw_writew(0, BCR_ILCRG);
-
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
deleted file mode 100644
index 412326d59e6fce..00000000000000
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sh_eth.h>
-#include <mach-se/mach/se.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_CFCARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-/* SH771X Ethernet driver */
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = PHY_ID,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth0_resources[] = {
- [0] = {
- .start = SH_ETH0_BASE,
- .end = SH_ETH0_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH0_IRQ,
- .end = SH_ETH0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth0_device = {
- .name = "sh771x-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth0_resources),
- .resource = sh_eth0_resources,
-};
-
-static struct resource sh_eth1_resources[] = {
- [0] = {
- .start = SH_ETH1_BASE,
- .end = SH_ETH1_BASE + 0x1B8 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH_TSU_BASE,
- .end = SH_TSU_BASE + 0x200 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = SH_ETH1_IRQ,
- .end = SH_ETH1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_eth1_device = {
- .name = "sh771x-ether",
- .id = 1,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth1_resources),
- .resource = sh_eth1_resources,
-};
-#endif
-
-static struct platform_device *se_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7712)
- &sh_eth0_device,
- &sh_eth1_device,
-#endif
-};
-
-static int __init se_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_setup = smsc_setup,
- .mv_init_irq = init_se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
deleted file mode 100644
index 09436f10ddf198..00000000000000
--- a/arch/sh/boards/mach-se/7721/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
deleted file mode 100644
index e6ef2a2655c37c..00000000000000
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7721.h>
-
-enum {
- UNUSED = 0,
-
- /* board specific interrupt sources */
- MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
- { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
- NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
- /* PPCR */
- __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
-
- register_intc_controller(&intc_desc);
- intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
deleted file mode 100644
index 3af724dc4ba44a..00000000000000
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <mach-se/mach/se7721.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = MRSHPC_IRQ0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
- &cf_ide_device,
- &heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
- mrshpc_setup_windows();
- return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
- /* for USB */
- __raw_writew(0x0000, 0xA405010C); /* PGCR */
- __raw_writew(0x0000, 0xA405010E); /* PHCR */
- __raw_writew(0x00AA, 0xA4050118); /* PPCR */
- __raw_writew(0x0000, 0xA4050124); /* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
- .mv_name = "Solution Engine 7721",
- .mv_setup = se7721_setup,
- .mv_init_irq = init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
deleted file mode 100644
index a5e89c0c6bb2d4..00000000000000
--- a/arch/sh/boards/mach-se/7722/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
deleted file mode 100644
index efa96edd47dc5f..00000000000000
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- */
-#define DRV_NAME "SE7722-FPGA"
-#define pr_fmt(fmt) DRV_NAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/sizes.h>
-#include <mach-se/mach/se7722.h>
-
-#define IRQ01_BASE_ADDR 0x11800000
-#define IRQ01_MODE_REG 0
-#define IRQ01_STS_REG 4
-#define IRQ01_MASK_REG 8
-
-static void __iomem *se7722_irq_regs;
-struct irq_domain *se7722_irq_domain;
-
-static void se7722_irq_demux(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int bit;
-
- chip->irq_mask_ack(data);
-
- mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
-
- for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
- generic_handle_domain_irq(se7722_irq_domain, bit);
-
- chip->irq_unmask(data);
-}
-
-static void __init se7722_domain_init(void)
-{
- int i;
-
- se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
- &irq_domain_simple_ops, NULL);
- if (unlikely(!se7722_irq_domain)) {
- printk("Failed to get IRQ domain\n");
- return;
- }
-
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
- int irq = irq_create_mapping(se7722_irq_domain, i);
-
- if (unlikely(irq == 0)) {
- printk("Failed to allocate IRQ %d\n", i);
- return;
- }
- }
-}
-
-static void __init se7722_gc_init(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
- unsigned int irq_base;
-
- irq_base = irq_linear_revmap(se7722_irq_domain, 0);
-
- gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
- handle_level_irq);
- if (unlikely(!gc))
- return;
-
- ct = gc->chip_types;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-
- ct->regs.mask = IRQ01_MASK_REG;
-
- irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
- IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
- * Initialize FPGA IRQs
- */
-void __init init_se7722_IRQ(void)
-{
- se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
- if (unlikely(!se7722_irq_regs)) {
- printk("Failed to remap IRQ01 regs\n");
- return;
- }
-
- /*
- * All FPGA IRQs disabled by default
- */
- iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
-
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
-
- se7722_domain_init();
- se7722_gc_init();
-}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
deleted file mode 100644
index 2cd4a2e84b930c..00000000000000
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2012 Paul Mundt
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/irqdomain.h>
-#include <linux/smc91x.h>
-#include <linux/sh_intc.h>
-#include <mach-se/mach/se7722.h>
-#include <mach-se/mach/mrshpc.h>
-#include <asm/machvec.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <cpu/sh7722.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = PA_MRSHPC_IO + 0x1f0,
- .end = PA_MRSHPC_IO + 0x1f0 + 8 ,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = PA_MRSHPC_IO + 0x1f0 + 0x206,
- .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- /* Filled in later */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
- .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
- .scan_timing = 3,
- .delay = 5,
- .keycodes = { /* SW1 -> SW30 */
- KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
- KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
- KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
- KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
- KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
- KEY_Z,
- KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
- },
-};
-
-static struct resource sh_keysc_resources[] = {
- [0] = {
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sh_keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(sh_keysc_resources),
- .resource = sh_keysc_resources,
- .dev = {
- .platform_data = &sh_keysc_info,
- },
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &cf_ide_device,
- &sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
- mrshpc_setup_windows();
-
- /* Wire-up dynamic vectors */
- cf_ide_resources[2].start = cf_ide_resources[2].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
-
- smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
- irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
-
- return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
- __raw_writew(0x010D, FPGA_OUT); /* FPGA */
-
- __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
- /* LCDC I/O */
- __raw_writew(0x0020, PORT_PSELD);
-
- /* SIOF1*/
- __raw_writew(0x0003, PORT_PSELB);
- __raw_writew(0xe000, PORT_PSELC);
- __raw_writew(0x0000, PORT_PKCR);
-
- /* LCDC */
- __raw_writew(0x4020, PORT_PHCR);
- __raw_writew(0x0000, PORT_PLCR);
- __raw_writew(0x0000, PORT_PMCR);
- __raw_writew(0x0002, PORT_PRCR);
- __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
-
- /* KEYSC */
- __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- __raw_writew(0x0000, PORT_PYCR);
- __raw_writew(0x0000, PORT_PZCR);
- __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
- .mv_name = "Solution Engine 7722" ,
- .mv_setup = se7722_setup ,
- .mv_init_irq = init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
deleted file mode 100644
index 6c6112b24617d0..00000000000000
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
deleted file mode 100644
index 14ce3024738f3b..00000000000000
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/irq.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on linux/arch/sh/boards/se/7722/irq.c
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7724 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-#include <linux/topology.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach-se/mach/se7724.h>
-
-struct fpga_irq {
- unsigned long sraddr;
- unsigned long mraddr;
- unsigned short mask;
- unsigned int base;
-};
-
-static unsigned int fpga2irq(unsigned int irq)
-{
- if (irq >= IRQ0_BASE &&
- irq <= IRQ0_END)
- return IRQ0_IRQ;
- else if (irq >= IRQ1_BASE &&
- irq <= IRQ1_END)
- return IRQ1_IRQ;
- else
- return IRQ2_IRQ;
-}
-
-static struct fpga_irq get_fpga_irq(unsigned int irq)
-{
- struct fpga_irq set;
-
- switch (irq) {
- case IRQ0_IRQ:
- set.sraddr = IRQ0_SR;
- set.mraddr = IRQ0_MR;
- set.mask = IRQ0_MASK;
- set.base = IRQ0_BASE;
- break;
- case IRQ1_IRQ:
- set.sraddr = IRQ1_SR;
- set.mraddr = IRQ1_MR;
- set.mask = IRQ1_MASK;
- set.base = IRQ1_BASE;
- break;
- default:
- set.sraddr = IRQ2_SR;
- set.mraddr = IRQ2_MR;
- set.mask = IRQ2_MASK;
- set.base = IRQ2_BASE;
- break;
- }
-
- return set;
-}
-
-static void disable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
-}
-
-static void enable_se7724_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
- unsigned int bit = irq - set.base;
- __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
-}
-
-static struct irq_chip se7724_irq_chip __read_mostly = {
- .name = "SE7724-FPGA",
- .irq_mask = disable_se7724_irq,
- .irq_unmask = enable_se7724_irq,
-};
-
-static void se7724_irq_demux(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = __raw_readw(set.sraddr);
- unsigned int ext_irq = set.base;
-
- intv &= set.mask;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7724_IRQ(void)
-{
- int irq_base, i;
-
- __raw_writew(0xffff, IRQ0_MR); /* mask all */
- __raw_writew(0xffff, IRQ1_MR); /* mask all */
- __raw_writew(0xffff, IRQ2_MR); /* mask all */
- __raw_writew(0x0000, IRQ0_SR); /* clear irq */
- __raw_writew(0x0000, IRQ1_SR); /* clear irq */
- __raw_writew(0x0000, IRQ2_SR); /* clear irq */
- __raw_writew(0x002a, IRQ_MODE); /* set irq type */
-
- irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
- SE7724_FPGA_IRQ_NR, numa_node_id());
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for FPGA\n", __func__);
- return;
- }
-
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
- irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
- handle_level_irq, "level");
-
- irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-
- irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
- irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
deleted file mode 100644
index 61c1fe78d71a05..00000000000000
--- a/arch/sh/boards/mach-se/7724/sdram.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * MS7724SE sdram self/auto-refresh setup code
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-#include <asm/romimage-macros.h>
-
-/* code to enter and leave self-refresh. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(ms7724se_sdram_enter_start)
-
- /* DBSC: put memory in self-refresh mode */
-
- ED 0xFD000010, 0x00000000 /* DBEN */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
-
- rts
- nop
-
-ENTRY(ms7724se_sdram_enter_end)
-
- .balign 4
-ENTRY(ms7724se_sdram_leave_start)
-
- /* DBSC: put memory in auto-refresh mode */
-
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_RSTANDBY, r0
- bf resume_rstandby
-
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- WAIT 1
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
-resume_rstandby:
-
- /* CPG: setup clocks before restarting external memory */
-
- ED 0xA4150024, 0x00004000 /* PLLCR */
-
- mov.l FRQCRA,r0
- mov.l @r0,r3
- mov.l KICK,r1
- or r1, r3
- mov.l r3, @r0
-
- mov.l LSTATS,r0
- mov #1,r1
-WAIT_LSTATS:
- mov.l @r0,r3
- tst r1,r3
- bf WAIT_LSTATS
-
- /* DBSC: re-initialize and put in auto-refresh */
-
- ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
- ED 0xFD000020, 0x015B0002 /* DBCONF */
- ED 0xFD000030, 0x03071502 /* DBTR0 */
- ED 0xFD000034, 0x02020102 /* DBTR1 */
- ED 0xFD000038, 0x01090405 /* DBTR2 */
- ED 0xFD00003C, 0x00000002 /* DBTR3 */
- ED 0xFD000008, 0x00000005 /* DBKIND */
- ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
- ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
- ED 0xFD000018, 0x00000001 /* DBCKECNT */
-
- mov #100,r0
-WAIT_400NS:
- dt r0
- bf WAIT_400NS
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
- ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
- ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
- ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
- ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
-
- mov #100,r0
-WAIT_400NS_2:
- dt r0
- bf WAIT_400NS_2
-
- ED 0xFD000010, 0x00000001 /* DBEN */
- ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
- ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
-
- mov.l DUMMY,r0
- mov.l @r0, r1 /* force single dummy read */
-
- ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
- ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
- ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
- ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
-
- rts
- nop
-
- .balign 4
-DUMMY: .long 0xac400000
-FRQCRA: .long 0xa4150000
-KICK: .long 0x80000000
-LSTATS: .long 0xa4150060
-
-ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
deleted file mode 100644
index b60a2626e18b27..00000000000000
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ /dev/null
@@ -1,986 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7724/setup.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#include <asm/clock.h>
-#include <asm/heartbeat.h>
-#include <asm/io.h>
-#include <asm/suspend.h>
-
-#include <cpu/sh7724.h>
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/interrupt.h>
-#include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <linux/smc91x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/videodev2.h>
-#include <linux/dma-map-ops.h>
-
-#include <mach-se/mach/se7724.h>
-#include <media/drv-intf/renesas-ceu.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
-static phys_addr_t ceu0_dma_membase;
-static phys_addr_t ceu1_dma_membase;
-
-/*
- * SWx 1234 5678
- * ------------------------------------
- * SW31 : 1001 1100 : default
- * SW32 : 0111 1111 : use on board flash
- *
- * SW41 : abxx xxxx -> a = 0 : Analog monitor
- * 1 : Digital monitor
- * b = 0 : VGA
- * 1 : 720p
- */
-
-/*
- * about 720p
- *
- * When you use 1280 x 720 lcdc output,
- * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
- * and change SW41 to use 720p
- */
-
-/*
- * about sound
- *
- * This setup.c supports FSI slave mode.
- * Please change J20, J21, J22 pin to 1-2 connection.
- */
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* LAN91C111 */
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "SMC91C111" ,
- .start = 0x1a300300,
- .end = 0x1a30030f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ0_SMC,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "free-area",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x01ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .dev = {
- .platform_data = &nor_flash_data,
- },
-};
-
-/* LCDC */
-static const struct fb_videomode lcdc_720p_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 1280,
- .yres = 720,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 40,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- },
-};
-
-static const struct fb_videomode lcdc_vga_modes[] = {
- {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 50,
- .hsync_len = 96,
- .upper_margin = 33,
- .lower_margin = 10,
- .vsync_len = 2,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .clock_divider = 1,
- .panel_cfg = { /* 7.0 inch */
- .width = 152,
- .height = 91,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe942fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf40),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-/* CEU0 */
-static struct ceu_platform_data ceu0_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu0_resources[] = {
- [0] = {
- .name = "CEU0",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu0_device = {
- .name = "renesas-ceu",
- .id = 0, /* "ceu.0" clock */
- .num_resources = ARRAY_SIZE(ceu0_resources),
- .resource = ceu0_resources,
- .dev = {
- .platform_data = &ceu0_pdata,
- },
-};
-
-/* CEU1 */
-static struct ceu_platform_data ceu1_pdata = {
- .num_subdevs = 0,
-};
-
-static struct resource ceu1_resources[] = {
- [0] = {
- .name = "CEU1",
- .start = 0xfe914000,
- .end = 0xfe91409f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ceu1_device = {
- .name = "renesas-ceu",
- .id = 1, /* "ceu.1" clock */
- .num_resources = ARRAY_SIZE(ceu1_resources),
- .resource = ceu1_resources,
- .dev = {
- .platform_data = &ceu1_pdata,
- },
-};
-
-/* FSI */
-/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xFE3C0000,
- .end = 0xFE3C021d,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi",
- .id = 0,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-static struct asoc_simple_card_info fsi_ak4642_info = {
- .name = "AK4642",
- .card = "FSIA-AK4642",
- .codec = "ak4642-codec.0-0012",
- .platform = "sh_fsi.0",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP,
- .cpu_dai = {
- .name = "fsia-dai",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
-};
-
-static struct platform_device fsi_ak4642_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi_ak4642_info,
- },
-};
-
-/* KEYSC in SoC (Needs SW33-2 set to ON) */
-static struct sh_keysc_info keysc_info = {
- .mode = SH_KEYSC_MODE_1,
- .scan_timing = 3,
- .delay = 50,
- .keycodes = {
- KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
- KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
- KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
- KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
- KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
- KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
- },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0x044b0000,
- .end = 0x044b000f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xbe0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0, /* "keysc0" clock */
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_info,
- },
-};
-
-/* SH Eth */
-static struct resource sh_eth_resources[] = {
- [0] = {
- .start = SH_ETH_ADDR,
- .end = SH_ETH_ADDR + 0x1FC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd60),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct sh_eth_plat_data sh_eth_plat = {
- .phy = 0x1f, /* SMSC LAN8187 */
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh_eth_device = {
- .name = "sh7724-ether",
- .id = 0,
- .dev = {
- .platform_data = &sh_eth_plat,
- },
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .resource = sh_eth_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb0_host_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb0_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d80124 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb0_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb0_host_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
- .resource = sh7724_usb0_host_resources,
-};
-
-static struct r8a66597_platdata sh7724_usb1_gadget_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7724_usb1_gadget_resources[] = {
- [0] = {
- .start = 0xa4d90000,
- .end = 0xa4d90123,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa40),
- .end = evt2irq(0xa40),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7724_usb1_gadget_device = {
- .name = "r8a66597_udc",
- .id = 1, /* USB1 */
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh7724_usb1_gadget_data,
- },
- .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
- .resource = sh7724_usb1_gadget_resources,
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct resource sdhi0_cn7_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0x04ce0000,
- .end = 0x04ce00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi0_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi0_cn7_device = {
- .name = "sh_mobile_sdhi",
- .id = 0,
- .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
- .resource = sdhi0_cn7_resources,
- .dev = {
- .platform_data = &sh7724_sdhi0_data,
- },
-};
-
-static struct resource sdhi1_cn8_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0x04cf0000,
- .end = 0x04cf00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x4e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct tmio_mmc_data sh7724_sdhi1_data = {
- .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
- .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
- .capabilities = MMC_CAP_SDIO_IRQ,
-};
-
-static struct platform_device sdhi1_cn8_device = {
- .name = "sh_mobile_sdhi",
- .id = 1,
- .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
- .resource = sdhi1_cn8_resources,
- .dev = {
- .platform_data = &sh7724_sdhi1_data,
- },
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .name = "IrDA",
- .start = 0xA45D0000,
- .end = 0xA45D0049,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_sir",
- .num_resources = ARRAY_SIZE(irda_resources),
- .resource = irda_resources,
-};
-
-#include <media/i2c/ak881x.h>
-#include <media/drv-intf/sh_vou.h>
-
-static struct ak881x_pdata ak881x_pdata = {
- .flags = AK881X_IF_MODE_SLAVE,
-};
-
-static struct i2c_board_info ak8813 = {
- /* With open J18 jumper address is 0x21 */
- I2C_BOARD_INFO("ak8813", 0x20),
- .platform_data = &ak881x_pdata,
-};
-
-static struct sh_vou_pdata sh_vou_pdata = {
- .bus_fmt = SH_VOU_BUS_8BIT,
- .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
- .board_info = &ak8813,
- .i2c_adap = 0,
-};
-
-static struct resource sh_vou_resources[] = {
- [0] = {
- .start = 0xfe960000,
- .end = 0xfe962043,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x8e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device vou_device = {
- .name = "sh-vou",
- .id = -1,
- .num_resources = ARRAY_SIZE(sh_vou_resources),
- .resource = sh_vou_resources,
- .dev = {
- .platform_data = &sh_vou_pdata,
- },
-};
-
-static struct platform_device *ms7724se_ceu_devices[] __initdata = {
- &ceu0_device,
- &ceu1_device,
-};
-
-static struct platform_device *ms7724se_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
- &lcdc_device,
- &nor_flash_device,
- &keysc_device,
- &sh_eth_device,
- &sh7724_usb0_host_device,
- &sh7724_usb1_gadget_device,
- &fsi_device,
- &fsi_ak4642_device,
- &sdhi0_cn7_device,
- &sdhi1_cn8_device,
- &irda_device,
- &vou_device,
-};
-
-/* I2C device */
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("ak4642", 0x12),
- },
-};
-
-#define EEPROM_OP 0xBA206000
-#define EEPROM_ADR 0xBA206004
-#define EEPROM_DATA 0xBA20600C
-#define EEPROM_STAT 0xBA206010
-#define EEPROM_STRT 0xBA206014
-
-static int __init sh_eth_is_eeprom_ready(void)
-{
- int t = 10000;
-
- while (t--) {
- if (!__raw_readw(EEPROM_STAT))
- return 1;
- udelay(1);
- }
-
- printk(KERN_ERR "ms7724se can not access to eeprom\n");
- return 0;
-}
-
-static void __init sh_eth_init(void)
-{
- int i;
- u16 mac;
-
- /* check EEPROM status */
- if (!sh_eth_is_eeprom_ready())
- return;
-
- /* read MAC addr from EEPROM */
- for (i = 0 ; i < 3 ; i++) {
- __raw_writew(0x0, EEPROM_OP); /* read */
- __raw_writew(i*2, EEPROM_ADR);
- __raw_writew(0x1, EEPROM_STRT);
- if (!sh_eth_is_eeprom_ready())
- return;
-
- mac = __raw_readw(EEPROM_DATA);
- sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
- sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
- }
-}
-
-#define SW4140 0xBA201000
-#define FPGA_OUT 0xBA200400
-#define PORT_HIZA 0xA4050158
-#define PORT_MSELCRB 0xA4050182
-
-#define SW41_A 0x0100
-#define SW41_B 0x0200
-#define SW41_C 0x0400
-#define SW41_D 0x0800
-#define SW41_E 0x1000
-#define SW41_F 0x2000
-#define SW41_G 0x4000
-#define SW41_H 0x8000
-
-extern char ms7724se_sdram_enter_start;
-extern char ms7724se_sdram_enter_end;
-extern char ms7724se_sdram_leave_start;
-extern char ms7724se_sdram_leave_end;
-
-static int __init arch_setup(void)
-{
- /* enable I2C device */
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- return 0;
-}
-arch_initcall(arch_setup);
-
-static int __init devices_setup(void)
-{
- u16 sw = __raw_readw(SW4140); /* select camera, monitor */
- struct clk *clk;
- u16 fpga_out;
-
- /* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
- SUSP_SH_RSTANDBY,
- &ms7724se_sdram_enter_start,
- &ms7724se_sdram_enter_end,
- &ms7724se_sdram_leave_start,
- &ms7724se_sdram_leave_end);
-
- regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* Reset Release */
- fpga_out = __raw_readw(FPGA_OUT);
- /* bit4: NTSC_PDN, bit5: NTSC_RESET */
- fpga_out &= ~((1 << 1) | /* LAN */
- (1 << 4) | /* AK8813 PDN */
- (1 << 5) | /* AK8813 RESET */
- (1 << 6) | /* VIDEO DAC */
- (1 << 7) | /* AK4643 */
- (1 << 8) | /* IrDA */
- (1 << 12) | /* USB0 */
- (1 << 14)); /* RMII */
- __raw_writew(fpga_out | (1 << 4), FPGA_OUT);
-
- udelay(10);
-
- /* AK8813 RESET */
- __raw_writew(fpga_out | (1 << 5), FPGA_OUT);
-
- udelay(10);
-
- __raw_writew(fpga_out, FPGA_OUT);
-
- /* turn on USB clocks, use external clock */
- __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
-
- /* Let LED9 show STATUS2 */
- gpio_request(GPIO_FN_STATUS2, NULL);
-
- /* Lit LED10 show STATUS0 */
- gpio_request(GPIO_FN_STATUS0, NULL);
-
- /* Lit LED11 show PDSTATUS */
- gpio_request(GPIO_FN_PDSTATUS, NULL);
-
- /* enable USB0 port */
- __raw_writew(0x0600, 0xa40501d4);
-
- /* enable USB1 port */
- __raw_writew(0x0600, 0xa4050192);
-
- /* enable IRQ 0,1,2 */
- gpio_request(GPIO_FN_INTC_IRQ0, NULL);
- gpio_request(GPIO_FN_INTC_IRQ1, NULL);
- gpio_request(GPIO_FN_INTC_IRQ2, NULL);
-
- /* enable SCIFA3 */
- gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
- gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
- gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
-
- /* enable LCDC */
- gpio_request(GPIO_FN_LCDD23, NULL);
- gpio_request(GPIO_FN_LCDD22, NULL);
- gpio_request(GPIO_FN_LCDD21, NULL);
- gpio_request(GPIO_FN_LCDD20, NULL);
- gpio_request(GPIO_FN_LCDD19, NULL);
- gpio_request(GPIO_FN_LCDD18, NULL);
- gpio_request(GPIO_FN_LCDD17, NULL);
- gpio_request(GPIO_FN_LCDD16, NULL);
- gpio_request(GPIO_FN_LCDD15, NULL);
- gpio_request(GPIO_FN_LCDD14, NULL);
- gpio_request(GPIO_FN_LCDD13, NULL);
- gpio_request(GPIO_FN_LCDD12, NULL);
- gpio_request(GPIO_FN_LCDD11, NULL);
- gpio_request(GPIO_FN_LCDD10, NULL);
- gpio_request(GPIO_FN_LCDD9, NULL);
- gpio_request(GPIO_FN_LCDD8, NULL);
- gpio_request(GPIO_FN_LCDD7, NULL);
- gpio_request(GPIO_FN_LCDD6, NULL);
- gpio_request(GPIO_FN_LCDD5, NULL);
- gpio_request(GPIO_FN_LCDD4, NULL);
- gpio_request(GPIO_FN_LCDD3, NULL);
- gpio_request(GPIO_FN_LCDD2, NULL);
- gpio_request(GPIO_FN_LCDD1, NULL);
- gpio_request(GPIO_FN_LCDD0, NULL);
- gpio_request(GPIO_FN_LCDDISP, NULL);
- gpio_request(GPIO_FN_LCDHSYN, NULL);
- gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_FN_LCDVSYN, NULL);
- gpio_request(GPIO_FN_LCDDON, NULL);
- gpio_request(GPIO_FN_LCDVEPWC, NULL);
- gpio_request(GPIO_FN_LCDVCPWC, NULL);
- gpio_request(GPIO_FN_LCDRD, NULL);
- gpio_request(GPIO_FN_LCDLCLK, NULL);
- __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
-
- /* enable CEU0 */
- gpio_request(GPIO_FN_VIO0_D15, NULL);
- gpio_request(GPIO_FN_VIO0_D14, NULL);
- gpio_request(GPIO_FN_VIO0_D13, NULL);
- gpio_request(GPIO_FN_VIO0_D12, NULL);
- gpio_request(GPIO_FN_VIO0_D11, NULL);
- gpio_request(GPIO_FN_VIO0_D10, NULL);
- gpio_request(GPIO_FN_VIO0_D9, NULL);
- gpio_request(GPIO_FN_VIO0_D8, NULL);
- gpio_request(GPIO_FN_VIO0_D7, NULL);
- gpio_request(GPIO_FN_VIO0_D6, NULL);
- gpio_request(GPIO_FN_VIO0_D5, NULL);
- gpio_request(GPIO_FN_VIO0_D4, NULL);
- gpio_request(GPIO_FN_VIO0_D3, NULL);
- gpio_request(GPIO_FN_VIO0_D2, NULL);
- gpio_request(GPIO_FN_VIO0_D1, NULL);
- gpio_request(GPIO_FN_VIO0_D0, NULL);
- gpio_request(GPIO_FN_VIO0_VD, NULL);
- gpio_request(GPIO_FN_VIO0_CLK, NULL);
- gpio_request(GPIO_FN_VIO0_FLD, NULL);
- gpio_request(GPIO_FN_VIO0_HD, NULL);
-
- /* enable CEU1 */
- gpio_request(GPIO_FN_VIO1_D7, NULL);
- gpio_request(GPIO_FN_VIO1_D6, NULL);
- gpio_request(GPIO_FN_VIO1_D5, NULL);
- gpio_request(GPIO_FN_VIO1_D4, NULL);
- gpio_request(GPIO_FN_VIO1_D3, NULL);
- gpio_request(GPIO_FN_VIO1_D2, NULL);
- gpio_request(GPIO_FN_VIO1_D1, NULL);
- gpio_request(GPIO_FN_VIO1_D0, NULL);
- gpio_request(GPIO_FN_VIO1_FLD, NULL);
- gpio_request(GPIO_FN_VIO1_HD, NULL);
- gpio_request(GPIO_FN_VIO1_VD, NULL);
- gpio_request(GPIO_FN_VIO1_CLK, NULL);
-
- /* KEYSC */
- gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
- gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
- gpio_request(GPIO_FN_KEYIN4, NULL);
- gpio_request(GPIO_FN_KEYIN3, NULL);
- gpio_request(GPIO_FN_KEYIN2, NULL);
- gpio_request(GPIO_FN_KEYIN1, NULL);
- gpio_request(GPIO_FN_KEYIN0, NULL);
- gpio_request(GPIO_FN_KEYOUT3, NULL);
- gpio_request(GPIO_FN_KEYOUT2, NULL);
- gpio_request(GPIO_FN_KEYOUT1, NULL);
- gpio_request(GPIO_FN_KEYOUT0, NULL);
-
- /* enable FSI */
- gpio_request(GPIO_FN_FSIMCKA, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
- gpio_request(GPIO_FN_FSIOASD, NULL);
- gpio_request(GPIO_FN_FSIIABCK, NULL);
- gpio_request(GPIO_FN_FSIIALRCK, NULL);
- gpio_request(GPIO_FN_FSIOABCK, NULL);
- gpio_request(GPIO_FN_FSIOALRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
-
- /* set SPU2 clock to 83.4 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 83333333));
- clk_put(clk);
- }
-
- /* change parent of FSI A */
- clk = clk_get(NULL, "fsia_clk");
- if (!IS_ERR(clk)) {
- /* 48kHz dummy clock was used to make sure 1/1 divide */
- clk_set_rate(&sh7724_fsimcka_clk, 48000);
- clk_set_parent(clk, &sh7724_fsimcka_clk);
- clk_set_rate(clk, 48000);
- clk_put(clk);
- }
-
- /* SDHI0 connected to cn7 */
- gpio_request(GPIO_FN_SDHI0CD, NULL);
- gpio_request(GPIO_FN_SDHI0WP, NULL);
- gpio_request(GPIO_FN_SDHI0D3, NULL);
- gpio_request(GPIO_FN_SDHI0D2, NULL);
- gpio_request(GPIO_FN_SDHI0D1, NULL);
- gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_FN_SDHI0CMD, NULL);
- gpio_request(GPIO_FN_SDHI0CLK, NULL);
-
- /* SDHI1 connected to cn8 */
- gpio_request(GPIO_FN_SDHI1CD, NULL);
- gpio_request(GPIO_FN_SDHI1WP, NULL);
- gpio_request(GPIO_FN_SDHI1D3, NULL);
- gpio_request(GPIO_FN_SDHI1D2, NULL);
- gpio_request(GPIO_FN_SDHI1D1, NULL);
- gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_FN_SDHI1CMD, NULL);
- gpio_request(GPIO_FN_SDHI1CLK, NULL);
-
- /* enable IrDA */
- gpio_request(GPIO_FN_IRDA_OUT, NULL);
- gpio_request(GPIO_FN_IRDA_IN, NULL);
-
- /*
- * enable SH-Eth
- *
- * please remove J33 pin from your board !!
- *
- * ms7724 board should not use GPIO_FN_LNKSTA pin
- * So, This time PTX5 is set to input pin
- */
- gpio_request(GPIO_FN_RMII_RXD0, NULL);
- gpio_request(GPIO_FN_RMII_RXD1, NULL);
- gpio_request(GPIO_FN_RMII_TXD0, NULL);
- gpio_request(GPIO_FN_RMII_TXD1, NULL);
- gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
- gpio_request(GPIO_FN_RMII_TX_EN, NULL);
- gpio_request(GPIO_FN_RMII_RX_ER, NULL);
- gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
- gpio_request(GPIO_FN_MDIO, NULL);
- gpio_request(GPIO_FN_MDC, NULL);
- gpio_request(GPIO_PTX5, NULL);
- gpio_direction_input(GPIO_PTX5);
- sh_eth_init();
-
- if (sw & SW41_B) {
- /* 720p */
- lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
- } else {
- /* VGA */
- lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
- lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
- }
-
- if (sw & SW41_A) {
- /* Digital monitor */
- lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].flags = 0;
- } else {
- /* Analog monitor */
- lcdc_info.ch[0].interface_type = RGB24;
- lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
- }
-
- /* VOU */
- gpio_request(GPIO_FN_DV_D15, NULL);
- gpio_request(GPIO_FN_DV_D14, NULL);
- gpio_request(GPIO_FN_DV_D13, NULL);
- gpio_request(GPIO_FN_DV_D12, NULL);
- gpio_request(GPIO_FN_DV_D11, NULL);
- gpio_request(GPIO_FN_DV_D10, NULL);
- gpio_request(GPIO_FN_DV_D9, NULL);
- gpio_request(GPIO_FN_DV_D8, NULL);
- gpio_request(GPIO_FN_DV_CLKI, NULL);
- gpio_request(GPIO_FN_DV_CLK, NULL);
- gpio_request(GPIO_FN_DV_VSYNC, NULL);
- gpio_request(GPIO_FN_DV_HSYNC, NULL);
-
- /* Initialize CEU platform devices separately to map memory first */
- device_initialize(&ms7724se_ceu_devices[0]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
- ceu0_dma_membase, ceu0_dma_membase,
- ceu0_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[0]);
-
- device_initialize(&ms7724se_ceu_devices[1]->dev);
- dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
- ceu1_dma_membase, ceu1_dma_membase,
- ceu1_dma_membase +
- CEU_BUFFER_MEMORY_SIZE - 1);
- platform_device_add(ms7724se_ceu_devices[1]);
-
- return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
-}
-device_initcall(devices_setup);
-
-/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
-static void __init ms7724se_mv_mem_reserve(void)
-{
- phys_addr_t phys;
- phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU0 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu0_dma_membase = phys;
-
- phys = memblock_phys_alloc(size, PAGE_SIZE);
- if (!phys)
- panic("Failed to allocate CEU1 memory\n");
-
- memblock_phys_free(phys, size);
- memblock_remove(phys, size);
- ceu1_dma_membase = phys;
-}
-
-static struct sh_machine_vector mv_ms7724se __initmv = {
- .mv_name = "ms7724se",
- .mv_init_irq = init_se7724_IRQ,
- .mv_mem_reserve = ms7724se_mv_mem_reserve,
-};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
deleted file mode 100644
index 2406d3e353524b..00000000000000
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the 7751 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
deleted file mode 100644
index dcefe58d87534b..00000000000000
--- a/arch/sh/boards/mach-se/7751/irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <mach-se/mach/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
- { 13, 3, 3, 2 },
- /* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-se7751",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
deleted file mode 100644
index 4c480605557f46..00000000000000
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
- return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-device_initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
- .mv_name = "7751 SolutionEngine",
- .mv_init_irq = init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
deleted file mode 100644
index 1f6669ab1bc0db..00000000000000
--- a/arch/sh/boards/mach-se/7780/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-#
-
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
deleted file mode 100644
index d427dfd711f171..00000000000000
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <mach-se/mach/se7780.h>
-
-#define INTC_BASE 0xffd00000
-#define INTC_ICR1 (INTC_BASE+0x1c)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK1);
- /* mask SM501 interrupt */
- __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
- /* enable all interrupt at FPGA */
- __raw_writew(0, FPGA_INTMSK2);
-
- /* set FPGA INTSEL register */
- /* FPGA + 0x06 */
- __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
- (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
- /* FPGA + 0x08 */
- __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
- (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
- (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
- (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
- /* FPGA + 0x0A */
- __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-
- /* ICR1: detect low level(for 2ndcut) */
- __raw_writel(0xAAAA0000, INTC_ICR1);
-
- /*
- * FPGA PCISEL register initialize
- *
- * CPU || SLOT1 | SLOT2 | S-ATA | USB
- * -------------------------------------
- * INTA || INTA | INTD | -- | INTB
- * -------------------------------------
- * INTB || INTB | INTA | -- | INTC
- * -------------------------------------
- * INTC || INTC | INTB | INTA | --
- * -------------------------------------
- * INTD || INTD | INTC | -- | INTA
- * -------------------------------------
- */
- __raw_writew(0x0013, FPGA_PCI_INTSEL1);
- __raw_writew(0xE402, FPGA_PCI_INTSEL2);
-}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
deleted file mode 100644
index 309f2681381b08..00000000000000
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct resource heartbeat_resource = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = 1,
- .resource = &heartbeat_resource,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
- [0] = {
- .name = "smc91x-regs" ,
- .start = PA_LAN + 0x300,
- .end = PA_LAN + 0x300 + 0x10 ,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SMC_IRQ,
- .end = SMC_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_eth_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(smc91x_eth_resources),
- .resource = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
- return platform_add_devices(se7780_devices,
- ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR 0xFFEA000E
-#define GPIO_PMSELR 0xFFEA0080
-#define GPIO_PECR 0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
- /* "SH-Linux" on LED Display */
- __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
- printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
- /*
- * PCI REQ/GNT setting
- * REQ0/GNT0 -> USB
- * REQ1/GNT1 -> PC Card
- * REQ2/GNT2 -> Serial ATA
- * REQ3/GNT3 -> PCI slot
- */
- __raw_writew(0x0213, FPGA_REQSEL);
-
- /* GPIO setting */
- __raw_writew(0x0000, GPIO_PECR);
- __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- __raw_writew(0x0c00, GPIO_PMSELR);
-
- /* iVDR Power ON */
- __raw_writew(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
- .mv_name = "Solution Engine 7780" ,
- .mv_setup = se7780_setup ,
- .mv_init_irq = init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
deleted file mode 100644
index 8f69fc147c733d..00000000000000
--- a/arch/sh/boards/mach-se/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
-
-obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
-obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
-obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
-obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
-obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
-obj-$(CONFIG_SH_7724_SOLUTION_ENGINE) += 7724/
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
deleted file mode 100644
index 4431da64a56f6a..00000000000000
--- a/arch/sh/boards/mach-se/board-se7619.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/se/7619/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Hitachi SH7619 SolutionEngine Support.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static int se7619_mode_pins(void)
-{
- return MODE_PIN2 | MODE_PIN0;
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_mode_pins = se7619_mode_pins,
-};
diff --git a/arch/sh/boards/mach-sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
deleted file mode 100644
index f89c25c6a39c8a..00000000000000
--- a/arch/sh/boards/mach-sh03/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel
-#
-
-obj-y := setup.o
-obj-$(CONFIG_RTC_DRV_GENERIC) += rtc.o
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
deleted file mode 100644
index 7fb474844a2d1d..00000000000000
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support
- *
- * Copyright (C) 2004 Saito.K & Jeanne(ksaito@interface.co.jp)
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#define RTC_BASE 0xb0000000
-#define RTC_SEC1 (RTC_BASE + 0)
-#define RTC_SEC10 (RTC_BASE + 1)
-#define RTC_MIN1 (RTC_BASE + 2)
-#define RTC_MIN10 (RTC_BASE + 3)
-#define RTC_HOU1 (RTC_BASE + 4)
-#define RTC_HOU10 (RTC_BASE + 5)
-#define RTC_WEE1 (RTC_BASE + 6)
-#define RTC_DAY1 (RTC_BASE + 7)
-#define RTC_DAY10 (RTC_BASE + 8)
-#define RTC_MON1 (RTC_BASE + 9)
-#define RTC_MON10 (RTC_BASE + 10)
-#define RTC_YEA1 (RTC_BASE + 11)
-#define RTC_YEA10 (RTC_BASE + 12)
-#define RTC_YEA100 (RTC_BASE + 13)
-#define RTC_YEA1000 (RTC_BASE + 14)
-#define RTC_CTL (RTC_BASE + 15)
-#define RTC_BUSY 1
-#define RTC_STOP 2
-
-static DEFINE_SPINLOCK(sh03_rtc_lock);
-
-static int sh03_rtc_gettimeofday(struct device *dev, struct rtc_time *tm)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&sh03_rtc_lock);
- again:
- do {
- sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
- min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
- day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
- mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
- year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
- + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
- + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
- } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
- if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
- hour > 23 || min > 59 || sec > 59) {
- printk(KERN_ERR
- "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n");
- printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
- year, mon, day, hour, min, sec);
-
- __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
- __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
- __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
- __raw_writeb(6, RTC_WEE1);
- __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
- __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
- __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
- __raw_writeb(0, RTC_YEA100);
- __raw_writeb(2, RTC_YEA1000);
- __raw_writeb(0, RTC_CTL);
- goto again;
- }
-
- spin_unlock(&sh03_rtc_lock);
-
- tm->tm_sec = sec;
- tm->tm_min = min;
- tm->tm_hour = hour;
- tm->tm_mday = day;
- tm->tm_mon = mon;
- tm->tm_year = year - 1900;
-
- return 0;
-}
-
-static int set_rtc_mmss(struct rtc_time *tm)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- int i;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&sh03_rtc_lock);
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
- break;
- cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
- real_seconds = tm->tm_sec;
- real_minutes = tm->tm_min;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- __raw_writeb(real_seconds % 10, RTC_SEC1);
- __raw_writeb(real_seconds / 10, RTC_SEC10);
- __raw_writeb(real_minutes % 10, RTC_MIN1);
- __raw_writeb(real_minutes / 10, RTC_MIN10);
- } else {
- printk_once(KERN_NOTICE
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -EINVAL;
- }
- spin_unlock(&sh03_rtc_lock);
-
- return retval;
-}
-
-int sh03_rtc_settimeofday(struct device *dev, struct rtc_time *tm)
-{
- return set_rtc_mmss(tm);
-}
-
-static const struct rtc_class_ops rtc_generic_ops = {
- .read_time = sh03_rtc_gettimeofday,
- .set_time = sh03_rtc_settimeofday,
-};
-
-static int __init sh03_time_init(void)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_data(NULL, "rtc-generic", -1,
- &rtc_generic_ops,
- sizeof(rtc_generic_ops));
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-arch_initcall(sh03_time_init);
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
deleted file mode 100644
index 3901b6031ad565..00000000000000
--- a/arch/sh/boards/mach-sh03/setup.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004 Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <mach-sh03/mach/io.h>
-#include <mach-sh03/mach/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct resource cf_ide_resources[] = {
- [0] = {
- .start = 0x1f0,
- .end = 0x1f0 + 8,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 0x1f0 + 0x206,
- .end = 0x1f0 +8 + 0x206 + 8,
- .flags = IORESOURCE_IO,
- },
- [2] = {
- .start = IRL2_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cf_ide_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(cf_ide_resources),
- .resource = cf_ide_resources,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa0800000,
- .end = 0xa0800000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
- &heartbeat_device,
- &cf_ide_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
- pgprot_t prot;
- unsigned long paddrbase;
- void *cf_ide_base;
-
- /* open I/O area window */
- paddrbase = virt_to_phys((void *)PA_AREA5_IO);
- prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
- cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
- if (!cf_ide_base) {
- printk("allocate_cf_area : can't open CF I/O window!\n");
- return -ENOMEM;
- }
-
- /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
- cf_ide_resources[0].start += (unsigned long)cf_ide_base;
- cf_ide_resources[0].end += (unsigned long)cf_ide_base;
- cf_ide_resources[1].start += (unsigned long)cf_ide_base;
- cf_ide_resources[1].end += (unsigned long)cf_ide_base;
-
- return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-device_initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
- .mv_name = "Interface (CTP/PCI-SH03)",
- .mv_init_irq = init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
deleted file mode 100644
index d6341310444a51..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
deleted file mode 100644
index efd382b7dad403..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
- *
- * Renesas Solutions SH7763RDP Support.
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/sh7763rdp.h>
-
-#define INTC_BASE (0xFFD00000)
-#define INTC_INT2PRI7 (INTC_BASE+0x4001C)
-#define INTC_INT2MSKCR (INTC_BASE+0x4003C)
-#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4)
-
-/*
- * Initialize IRQ setting
- */
-void __init init_sh7763rdp_IRQ(void)
-{
- /* GPIO enabled */
- __raw_writel(1 << 25, INTC_INT2MSKCR);
-
- /* enable GPIO interrupts */
- __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
- INTC_INT2PRI7);
-
- /* USBH enabled */
- __raw_writel(1 << 17, INTC_INT2MSKCR1);
-
- /* GETHER enabled */
- __raw_writel(1 << 16, INTC_INT2MSKCR1);
-
- /* DMAC enabled */
- __raw_writel(1 << 8, INTC_INT2MSKCR);
-}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
deleted file mode 100644
index 97e715e4e9b33c..00000000000000
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
- *
- * Renesas Solutions sh7763rdp board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_intc.h>
-#include <mach/sh7763rdp.h>
-#include <asm/sh7760fb.h>
-
-/* NOR Flash */
-static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
- {
- .name = "U-Boot",
- .offset = 0,
- .size = (2 * 128 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "Linux-Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (20 * 128 * 1024),
- }, {
- .name = "Root Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data sh7763rdp_nor_flash_data = {
- .width = 2,
- .parts = sh7763rdp_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
-};
-
-static struct resource sh7763rdp_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0,
- .end = (64 * 1024 * 1024),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device sh7763rdp_nor_flash_device = {
- .name = "physmap-flash",
- .resource = sh7763rdp_nor_flash_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
- .dev = {
- .platform_data = &sh7763rdp_nor_flash_data,
- },
-};
-
-/*
- * SH-Ether
- *
- * SH Ether of SH7763 has multi IRQ handling.
- * (0x920,0x940,0x960 -> 0x920)
- */
-static struct resource sh_eth_resources[] = {
- {
- .start = 0xFEE00800, /* use eth1 */
- .end = 0xFEE00F7C - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFEE01800, /* TSU */
- .end = 0xFEE01FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x920), /* irq number */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_eth_plat_data sh7763_eth_pdata = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device sh7763rdp_eth_device = {
- .name = "sh7763-gether",
- .resource = sh_eth_resources,
- .num_resources = ARRAY_SIZE(sh_eth_resources),
- .dev = {
- .platform_data = &sh7763_eth_pdata,
- },
-};
-
-/* SH7763 LCDC */
-static struct resource sh7763rdp_fb_resources[] = {
- {
- .start = 0xFFE80000,
- .end = 0xFFE80442 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct fb_videomode sh7763fb_videomode = {
- .refresh = 60,
- .name = "VGA Monitor",
- .xres = 640,
- .yres = 480,
- .pixclock = 10000,
- .left_margin = 80,
- .right_margin = 24,
- .upper_margin = 30,
- .lower_margin = 1,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = FBINFO_FLAG_DEFAULT,
-};
-
-static struct sh7760fb_platdata sh7763fb_def_pdata = {
- .def_mode = &sh7763fb_videomode,
- .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
- .lddfr = LDDFR_16BPP_RGB565,
- .ldpmmr = 0x0000,
- .ldpspr = 0xFFFF,
- .ldaclnr = 0x0001,
- .ldickr = 0x1102,
- .rotate = 0,
- .novsync = 0,
- .blank = NULL,
-};
-
-static struct platform_device sh7763rdp_fb_device = {
- .name = "sh7760-lcdc",
- .resource = sh7763rdp_fb_resources,
- .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
- .dev = {
- .platform_data = &sh7763fb_def_pdata,
- },
-};
-
-static struct platform_device *sh7763rdp_devices[] __initdata = {
- &sh7763rdp_nor_flash_device,
- &sh7763rdp_eth_device,
- &sh7763rdp_fb_device,
-};
-
-static int __init sh7763rdp_devices_setup(void)
-{
- return platform_add_devices(sh7763rdp_devices,
- ARRAY_SIZE(sh7763rdp_devices));
-}
-device_initcall(sh7763rdp_devices_setup);
-
-static void __init sh7763rdp_setup(char **cmdline_p)
-{
- /* Board version check */
- if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
- printk(KERN_INFO "RTE Standard Configuration\n");
- else
- printk(KERN_INFO "RTA Standard Configuration\n");
-
- /* USB pin select bits (clear bit 5-2 to 0) */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
- /* USBH setup port I controls to other (clear bits 4-9 to 0) */
- __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
-
- /* Select USB Host controller */
- __raw_writew(0x00, USB_USBHSC);
-
- /* For LCD */
- /* set PTJ7-1, bits 15-2 of PJCR to 0 */
- __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
- /* set PTI5, bits 11-10 of PICR to 0 */
- __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
- __raw_writew(0, PORT_PKCR);
- __raw_writew(0, PORT_PLCR);
- /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
- /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
- __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
-
- /* For HAC */
- /* bit3-0 0100:HAC & SSI1 enable */
- __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
- /* bit14 1:SSI_HAC_CLK enable */
- __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
-
- /* SH-Ether */
- __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
- __raw_writew(0x0, PORT_PFCR);
-
- /* MMC */
- /*selects SCIF and MMC other functions */
- __raw_writew(0x0001, PORT_PSEL0);
- /* MMC clock operates */
- __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
- __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
- __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
-}
-
-static struct sh_machine_vector mv_sh7763rdp __initmv = {
- .mv_name = "sh7763drp",
- .mv_setup = sh7763rdp_setup,
- .mv_init_irq = init_sh7763rdp_IRQ,
-};
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
deleted file mode 100644
index 6caefa1145980d..00000000000000
--- a/arch/sh/boards/mach-x3proto/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += setup.o ilsel.o
-
-obj-$(CONFIG_GPIOLIB) += gpio.o
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
deleted file mode 100644
index f82d3a6a844a58..00000000000000
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/gpio.c
- *
- * Renesas SH-X3 Prototype Baseboard GPIO Support.
- *
- * Copyright (C) 2010 - 2012 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/driver.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-
-#define KEYCTLR 0xb81c0000
-#define KEYOUTR 0xb81c0002
-#define KEYDETR 0xb81c0004
-
-static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static struct irq_domain *x3proto_irq_domain;
-
-static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
- unsigned long flags;
- unsigned int data;
-
- spin_lock_irqsave(&x3proto_gpio_lock, flags);
- data = __raw_readw(KEYCTLR);
- data |= (1 << gpio);
- __raw_writew(data, KEYCTLR);
- spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
-
- return 0;
-}
-
-static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
-{
- return !!(__raw_readw(KEYDETR) & (1 << gpio));
-}
-
-static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
- int virq;
-
- if (gpio < chip->ngpio)
- virq = irq_create_mapping(x3proto_irq_domain, gpio);
- else
- virq = -ENXIO;
-
- return virq;
-}
-
-static void x3proto_gpio_irq_handler(struct irq_desc *desc)
-{
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- unsigned long mask;
- int pin;
-
- chip->irq_mask_ack(data);
-
- mask = __raw_readw(KEYDETR);
- for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
- generic_handle_domain_irq(x3proto_irq_domain, pin);
-
- chip->irq_unmask(data);
-}
-
-struct gpio_chip x3proto_gpio_chip = {
- .label = "x3proto-gpio",
- .direction_input = x3proto_gpio_direction_input,
- .get = x3proto_gpio_get,
- .to_irq = x3proto_gpio_to_irq,
- .base = -1,
- .ngpio = NR_BASEBOARD_GPIOS,
-};
-
-static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
- "gpio");
-
- return 0;
-}
-
-static struct irq_domain_ops x3proto_gpio_irq_ops = {
- .map = x3proto_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-int __init x3proto_gpio_setup(void)
-{
- int ilsel, ret;
-
- ilsel = ilsel_enable(ILSEL_KEY);
- if (unlikely(ilsel < 0))
- return ilsel;
-
- ret = gpiochip_add_data(&x3proto_gpio_chip, NULL);
- if (unlikely(ret))
- goto err_gpio;
-
- x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
- &x3proto_gpio_irq_ops, NULL);
- if (unlikely(!x3proto_irq_domain))
- goto err_irq;
-
- pr_info("registering '%s' support, handling GPIOs %u -> %u, "
- "bound to IRQ %u\n",
- x3proto_gpio_chip.label, x3proto_gpio_chip.base,
- x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
- ilsel);
-
- irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
- irq_set_irq_wake(ilsel, 1);
-
- return 0;
-
-err_irq:
- gpiochip_remove(&x3proto_gpio_chip);
- ret = 0;
-err_gpio:
- synchronize_irq(ilsel);
-
- ilsel_disable(ILSEL_KEY);
-
- return ret;
-}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
deleted file mode 100644
index f0d5eb41521a49..00000000000000
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/ilsel.c
- *
- * Helper routines for SH-X3 proto board ILSEL.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <mach/ilsel.h>
-
-/*
- * ILSEL is split across:
- *
- * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ]
- * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ]
- * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ]
- * ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
- *
- * With each level being relative to an ilsel_source_t.
- */
-#define ILSEL_BASE 0xb8100004
-#define ILSEL_LEVELS 15
-
-/*
- * ILSEL level map, in descending order from the highest level down.
- *
- * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
- * directly to IRLs. As the IRQs are numbered in reverse order relative
- * to the interrupt level, the level map is carefully managed to ensure a
- * 1:1 mapping between the bit position and the IRQ number.
- *
- * This careful constructions allows ilsel_enable*() to be referenced
- * directly for hooking up an ILSEL set and getting back an IRQ which can
- * subsequently be used for internal accounting in the (optional) disable
- * path.
- */
-static unsigned long ilsel_level_map;
-
-static inline unsigned int ilsel_offset(unsigned int bit)
-{
- return ILSEL_LEVELS - bit - 1;
-}
-
-static inline unsigned long mk_ilsel_addr(unsigned int bit)
-{
- return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
-}
-
-static inline unsigned int mk_ilsel_shift(unsigned int bit)
-{
- return (ilsel_offset(bit) & 0x3) << 2;
-}
-
-static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
-{
- unsigned int tmp, shift;
- unsigned long addr;
-
- pr_notice("enabling ILSEL set %d\n", set);
-
- addr = mk_ilsel_addr(bit);
- shift = mk_ilsel_shift(bit);
-
- pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
- __func__, bit, addr, shift, set);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << shift);
- tmp |= set << shift;
- __raw_writew(tmp, addr);
-}
-
-/**
- * ilsel_enable - Enable an ILSEL set.
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- *
- * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
- * available interrupt level. Callers should take care to order callsites
- * noting descending interrupt levels. Aliasing FPGA and external board
- * IRQs need to use ilsel_enable_fixed().
- *
- * The return value is an IRQ number that can later be taken down with
- * ilsel_disable().
- */
-int ilsel_enable(ilsel_source_t set)
-{
- unsigned int bit;
-
- if (unlikely(set > ILSEL_KEY)) {
- pr_err("Aliased sources must use ilsel_enable_fixed()\n");
- return -EINVAL;
- }
-
- do {
- bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
- } while (test_and_set_bit(bit, &ilsel_level_map));
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable);
-
-/**
- * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
- * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
- * @level: Interrupt level (1 - 15)
- *
- * Enables a given ILSEL source at a fixed interrupt level. Necessary
- * both for level reservation as well as for aliased sources that only
- * exist on special ILSEL#s.
- *
- * Returns an IRQ number (as ilsel_enable()).
- */
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
-{
- unsigned int bit = ilsel_offset(level - 1);
-
- if (test_and_set_bit(bit, &ilsel_level_map))
- return -EBUSY;
-
- __ilsel_enable(set, bit);
-
- return bit;
-}
-EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
-
-/**
- * ilsel_disable - Disable an ILSEL set
- * @irq: Bit position for ILSEL set value (retval from enable routines)
- *
- * Disable a previously enabled ILSEL set.
- */
-void ilsel_disable(unsigned int irq)
-{
- unsigned long addr;
- unsigned int tmp;
-
- pr_notice("disabling ILSEL set %d\n", irq);
-
- addr = mk_ilsel_addr(irq);
-
- tmp = __raw_readw(addr);
- tmp &= ~(0xf << mk_ilsel_shift(irq));
- __raw_writew(tmp, addr);
-
- clear_bit(irq, &ilsel_level_map);
-}
-EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
deleted file mode 100644
index 95b85f2e13dda7..00000000000000
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/mach-x3proto/setup.c
- *
- * Renesas SH-X3 Prototype Board Support.
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/m66592.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <mach/ilsel.h>
-#include <mach/hardware.h>
-#include <asm/smp-ops.h>
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xb8140020,
- .end = 0xb8140020,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x18000300,
- .end = 0x18000300 + 0x10 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .resource = smc91x_resources,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
- .vif = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0x18040000,
- .end = 0x18080000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .xtal = M66592_PLATDATA_XTAL_24MHZ,
- .vif = 1,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
- [0] = {
- .name = "m66592_udc",
- .start = 0x18080000,
- .end = 0x180c0000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "m66592_udc",
- /* Filled in by ilsel */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
- .name = "m66592_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
- .resource = m66592_usb_peripheral_resources,
-};
-
-static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
- {
- .desc = "key44",
- .code = KEY_POWER,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key43",
- .code = KEY_SUSPEND,
- .active_low = 1,
- .wakeup = 1,
- }, {
- .desc = "key42",
- .code = KEY_KATAKANAHIRAGANA,
- .active_low = 1,
- }, {
- .desc = "key41",
- .code = KEY_SWITCHVIDEOMODE,
- .active_low = 1,
- }, {
- .desc = "key34",
- .code = KEY_F12,
- .active_low = 1,
- }, {
- .desc = "key33",
- .code = KEY_F11,
- .active_low = 1,
- }, {
- .desc = "key32",
- .code = KEY_F10,
- .active_low = 1,
- }, {
- .desc = "key31",
- .code = KEY_F9,
- .active_low = 1,
- }, {
- .desc = "key24",
- .code = KEY_F8,
- .active_low = 1,
- }, {
- .desc = "key23",
- .code = KEY_F7,
- .active_low = 1,
- }, {
- .desc = "key22",
- .code = KEY_F6,
- .active_low = 1,
- }, {
- .desc = "key21",
- .code = KEY_F5,
- .active_low = 1,
- }, {
- .desc = "key14",
- .code = KEY_F4,
- .active_low = 1,
- }, {
- .desc = "key13",
- .code = KEY_F3,
- .active_low = 1,
- }, {
- .desc = "key12",
- .code = KEY_F2,
- .active_low = 1,
- }, {
- .desc = "key11",
- .code = KEY_F1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data baseboard_buttons_data = {
- .buttons = baseboard_buttons,
- .nbuttons = ARRAY_SIZE(baseboard_buttons),
-};
-
-static struct platform_device baseboard_buttons_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &baseboard_buttons_data,
- },
-};
-
-static struct platform_device *x3proto_devices[] __initdata = {
- &heartbeat_device,
- &smc91x_device,
- &r8a66597_usb_host_device,
- &m66592_usb_peripheral_device,
- &baseboard_buttons_device,
-};
-
-static void __init x3proto_init_irq(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
- /* Set ICR0.LVLMODE */
- __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
-static int __init x3proto_devices_setup(void)
-{
- int ret, i;
-
- /*
- * IRLs are only needed for ILSEL mappings, so flip over the INTC
- * pins at a later point to enable the GPIOs to settle.
- */
- x3proto_init_irq();
-
- /*
- * Now that ILSELs are available, set up the baseboard GPIOs.
- */
- ret = x3proto_gpio_setup();
- if (unlikely(ret))
- return ret;
-
- /*
- * Propagate dynamic GPIOs for the baseboard button device.
- */
- for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
- baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
-
- r8a66597_usb_host_resources[1].start =
- r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
-
- m66592_usb_peripheral_resources[1].start =
- m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
-
- smc91x_resources[1].start =
- smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
-
- return platform_add_devices(x3proto_devices,
- ARRAY_SIZE(x3proto_devices));
-}
-device_initcall(x3proto_devices_setup);
-
-static void __init x3proto_setup(char **cmdline_p)
-{
- register_smp_ops(&shx3_smp_ops);
-}
-
-static struct sh_machine_vector mv_x3proto __initmv = {
- .mv_name = "x3proto",
- .mv_setup = x3proto_setup,
-};
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
deleted file mode 100644
index f7f3e618e85b6a..00000000000000
--- a/arch/sh/boards/of-generic.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH generic board support, using device tree
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/of_fdt.h>
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-
-#ifdef CONFIG_SMP
-
-static void dummy_smp_setup(void)
-{
-}
-
-static void dummy_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
-}
-
-static unsigned int dummy_smp_processor_id(void)
-{
- return 0;
-}
-
-static void dummy_send_ipi(unsigned int cpu, unsigned int message)
-{
-}
-
-static struct plat_smp_ops dummy_smp_ops = {
- .smp_setup = dummy_smp_setup,
- .prepare_cpus = dummy_prepare_cpus,
- .start_cpu = dummy_start_cpu,
- .smp_processor_id = dummy_smp_processor_id,
- .send_ipi = dummy_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-extern const struct of_cpu_method __cpu_method_of_table[];
-const struct of_cpu_method __cpu_method_of_table_sentinel
- __section("__cpu_method_of_table_end");
-
-static void sh_of_smp_probe(void)
-{
- struct device_node *np;
- const char *method = NULL;
- const struct of_cpu_method *m = __cpu_method_of_table;
-
- pr_info("SH generic board support: scanning for cpus\n");
-
- init_cpu_possible(cpumask_of(0));
-
- for_each_of_cpu_node(np) {
- u64 id = of_get_cpu_hwid(np, 0);
-
- if (id < NR_CPUS) {
- if (!method)
- of_property_read_string(np, "enable-method", &method);
- set_cpu_possible(id, true);
- set_cpu_present(id, true);
- __cpu_number_map[id] = id;
- __cpu_logical_map[id] = id;
- }
- }
- if (!method) {
- np = of_find_node_by_name(NULL, "cpus");
- of_property_read_string(np, "enable-method", &method);
- of_node_put(np);
- }
-
- pr_info("CPU enable method: %s\n", method);
- if (method)
- for (; m->method; m++)
- if (!strcmp(m->method, method)) {
- register_smp_ops(m->ops);
- return;
- }
-
- register_smp_ops(&dummy_smp_ops);
-}
-
-#else
-
-static void sh_of_smp_probe(void)
-{
-}
-
-#endif
-
-static void noop(void)
-{
-}
-
-static int noopi(void)
-{
- return 0;
-}
-
-static void __init sh_of_mem_reserve(void)
-{
- early_init_fdt_reserve_self();
- early_init_fdt_scan_reserved_mem();
-}
-
-static void __init sh_of_setup(char **cmdline_p)
-{
- struct device_node *root;
-
- sh_mv.mv_name = "Unknown SH model";
- root = of_find_node_by_path("/");
- if (root) {
- of_property_read_string(root, "model", &sh_mv.mv_name);
- of_node_put(root);
- }
-
- sh_of_smp_probe();
-}
-
-static int sh_of_irq_demux(int irq)
-{
- /* FIXME: eventually this should not be used at all;
- * the interrupt controller should set_handle_irq(). */
- return irq;
-}
-
-static void __init sh_of_init_irq(void)
-{
- pr_info("SH generic board support: scanning for interrupt controllers\n");
- irqchip_init();
-}
-
-static int __init sh_of_clk_init(void)
-{
-#ifdef CONFIG_COMMON_CLK
- /* Disabled pending move to COMMON_CLK framework. */
- pr_info("SH generic board support: scanning for clk providers\n");
- of_clk_init(NULL);
-#endif
- return 0;
-}
-
-static struct sh_machine_vector __initmv sh_of_generic_mv = {
- .mv_setup = sh_of_setup,
- .mv_name = "devicetree", /* replaced by DT root's model */
- .mv_irq_demux = sh_of_irq_demux,
- .mv_init_irq = sh_of_init_irq,
- .mv_clk_init = sh_of_clk_init,
- .mv_mode_pins = noopi,
- .mv_mem_init = noop,
- .mv_mem_reserve = sh_of_mem_reserve,
-};
-
-struct sh_clk_ops;
-
-void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
-}
-
-void __init __weak plat_irq_setup(void)
-{
-}
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
deleted file mode 100644
index 6603bbbc917d64..00000000000000
--- a/arch/sh/boot/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-zImage
-vmlinux*
-uImage*
-!vmlinux.scr
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
deleted file mode 100644
index 1f5d2df3c7e060..00000000000000
--- a/arch/sh/boot/Makefile
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# arch/sh/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1999 Stuart Menefy
-#
-
-#
-# Assign safe dummy values if these variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_PAGE_OFFSET ?= 0x80000000
-CONFIG_MEMORY_START ?= 0x0c000000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
-CONFIG_ENTRY_OFFSET ?= 0x00001000
-CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
-
-suffix_y := bin
-suffix_$(CONFIG_KERNEL_GZIP) := gz
-suffix_$(CONFIG_KERNEL_BZIP2) := bz2
-suffix_$(CONFIG_KERNEL_LZMA) := lzma
-suffix_$(CONFIG_KERNEL_XZ) := xz
-suffix_$(CONFIG_KERNEL_LZO) := lzo
-
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
- uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin \
- vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
- vmlinux.bin.xz vmlinux.bin.lzo
-subdir- := compressed romimage
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
- $(Q)$(MAKE) $(build)=$(obj)/romimage $@
-
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
-
-KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET)]')
-
-KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
-
-UIMAGE_LOADADDR = $(KERNEL_LOAD)
-UIMAGE_ENTRYADDR = $(KERNEL_ENTRY)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern)
-
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo)
-
-$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 FORCE
- $(call if_changed,uimage,bzip2)
-
-$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,uimage,gzip)
-
-$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
- $(call if_changed,uimage,lzma)
-
-$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz FORCE
- $(call if_changed,uimage,xz)
-
-$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
- $(call if_changed,uimage,lzo)
-
-$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
- $(call if_changed,uimage,none)
-
-OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
-$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
-
-OBJCOPYFLAGS_uImage.srec := -I binary -O srec
-$(obj)/uImage.srec: $(obj)/uImage FORCE
- $(call if_changed,objcopy)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix_y)
- @ln -sf $(notdir $<) $@
- @echo ' Image $@ is ready'
-
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
- KERNEL_MEMORY suffix_y
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
deleted file mode 100644
index cd16663bc7c84c..00000000000000
--- a/arch/sh/boot/compressed/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
deleted file mode 100644
index 591125c42d49df..00000000000000
--- a/arch/sh/boot/compressed/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-OBJECTS := head_32.o misc.o cache.o piggy.o \
- ashiftrt.o ashldi3.o ashrsi3.o ashlsi3.o lshrsi3.o
-
-# These were previously generated files. When you are building the kernel
-# with O=, make sure to remove the stale files in the output tree. Otherwise,
-# the build system wrongly compiles the stale ones.
-ifdef building_out_of_srctree
-$(shell rm -f $(addprefix $(obj)/, ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S))
-endif
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
- vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
-
-GCOV_PROFILE := n
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-#
-ifeq ($(CONFIG_32BIT),y)
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-else
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(KERNEL_MEMORY) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-endif
-
-ccflags-remove-$(CONFIG_MCOUNT) += -pg
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
- -T $(obj)/../../kernel/vmlinux.lds
-
-KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-
-$(obj)/vmlinux: $(addprefix $(obj)/, $(OBJECTS)) FORCE
- $(call if_changed,ld)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2_with_size)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma_with_size)
-$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,xzkern_with_size)
-$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzo_with_size)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/compressed/ashiftrt.S b/arch/sh/boot/compressed/ashiftrt.S
deleted file mode 100644
index 0f3b291a3f4bca..00000000000000
--- a/arch/sh/boot/compressed/ashiftrt.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashiftrt.S"
diff --git a/arch/sh/boot/compressed/ashldi3.c b/arch/sh/boot/compressed/ashldi3.c
deleted file mode 100644
index 7cebd646df839b..00000000000000
--- a/arch/sh/boot/compressed/ashldi3.c
+++ /dev/null
@@ -1,2 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include "../../lib/ashldi3.c"
diff --git a/arch/sh/boot/compressed/ashlsi3.S b/arch/sh/boot/compressed/ashlsi3.S
deleted file mode 100644
index e354262b275f4d..00000000000000
--- a/arch/sh/boot/compressed/ashlsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashlsi3.S"
diff --git a/arch/sh/boot/compressed/ashrsi3.S b/arch/sh/boot/compressed/ashrsi3.S
deleted file mode 100644
index e564be9a4dcd89..00000000000000
--- a/arch/sh/boot/compressed/ashrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/ashrsi3.S"
diff --git a/arch/sh/boot/compressed/cache.c b/arch/sh/boot/compressed/cache.c
deleted file mode 100644
index 31e04ff4841ed0..00000000000000
--- a/arch/sh/boot/compressed/cache.c
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-int cache_control(unsigned int command)
-{
- volatile unsigned int *p = (volatile unsigned int *) 0x80000000;
- int i;
-
- for (i = 0; i < (32 * 1024); i += 32) {
- (void)*p;
- p += (32 / sizeof(int));
- }
-
- return 0;
-}
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
deleted file mode 100644
index 7bb168133dbbf8..00000000000000
--- a/arch/sh/boot/compressed/head_32.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/compressed/head.S
- *
- * Copyright (C) 1999 Stuart Menefy
- * Copyright (C) 2003 SUGIOKA Toshinobu
- */
-
-.text
-
-#include <asm/page.h>
-
- .global startup
-startup:
- /* Load initial status register */
- mov.l init_sr, r1
- ldc r1, sr
-
- /* Move myself to proper location if necessary */
- mova 1f, r0
- mov.l 1f, r2
- cmp/eq r2, r0
- bt clear_bss
- sub r0, r2
- mov.l bss_start_addr, r0
- mov #0xffffffe0, r1
- and r1, r0 ! align cache line
- mov.l text_start_addr, r3
- mov r0, r1
- sub r2, r1
-3:
- mov.l @r1, r4
- mov.l @(4,r1), r5
- mov.l @(8,r1), r6
- mov.l @(12,r1), r7
- mov.l @(16,r1), r8
- mov.l @(20,r1), r9
- mov.l @(24,r1), r10
- mov.l @(28,r1), r11
- mov.l r4, @r0
- mov.l r5, @(4,r0)
- mov.l r6, @(8,r0)
- mov.l r7, @(12,r0)
- mov.l r8, @(16,r0)
- mov.l r9, @(20,r0)
- mov.l r10, @(24,r0)
- mov.l r11, @(28,r0)
-#ifdef CONFIG_CPU_SH4
- ocbwb @r0
-#endif
- cmp/hi r3, r0
- add #-32, r0
- bt/s 3b
- add #-32, r1
- mov.l 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 1b
-2: .long clear_bss
-text_start_addr:
- .long startup
-
- /* Clear BSS */
-clear_bss:
- mov.l end_addr, r1
- mov.l bss_start_addr, r2
- mov #0, r0
-l1:
- mov.l r0, @-r1
- cmp/eq r1,r2
- bf l1
-
- /* Set the initial pointer. */
- mov.l init_stack_addr, r0
- mov.l @r0, r15
-
- /* Decompress the kernel */
- mov.l decompress_kernel_addr, r0
- jsr @r0
- nop
-
- /* Jump to the start of the decompressed kernel */
- mov.l kernel_start_addr, r0
- jmp @r0
- nop
-
- .align 2
-bss_start_addr:
- .long __bss_start
-end_addr:
- .long _end
-init_sr:
- .long 0x500000F0 /* Privileged mode, Bank=0, Block=1, IMASK=0xF */
-kexec_magic:
- .long 0x400000F0 /* magic used by kexec to parse zImage format */
-init_stack_addr:
- .long stack_start
-decompress_kernel_addr:
- .long decompress_kernel
-kernel_start_addr:
-#ifdef CONFIG_32BIT
- .long ___pa(_text+PAGE_SIZE)
-#else
- .long _text+PAGE_SIZE
-#endif
-
- .align 9
-fake_headers_as_bzImage:
- .word 0
- .ascii "HdrS" ! header signature
- .word 0x0202 ! header version number (>= 0x0105)
- ! or else old loadlin-1.5 will fail)
- .word 0 ! default_switch
- .word 0 ! SETUPSEG
- .word 0x1000
- .word 0 ! pointing to kernel version string
- .byte 0 ! = 0, old one (LILO, Loadlin,
- ! 0xTV: T=0 for LILO
- ! V = version
- .byte 1 ! Load flags bzImage=1
- .word 0x8000 ! size to move, when setup is not
- .long 0x100000 ! 0x100000 = default for big kernel
- .long 0 ! address of loaded ramdisk image
- .long 0 # its size in bytes
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
deleted file mode 100644
index 9993113c671386..00000000000000
--- a/arch/sh/boot/compressed/head_64.S
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/shmedia/boot/compressed/head.S
- *
- * Copied from
- * arch/shmedia/kernel/head.S
- * which carried the copyright:
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * Modification for compressed loader:
- * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
- */
-#include <asm/cache.h>
-#include <asm/tlb.h>
-#include <cpu/mmu_context.h>
-#include <cpu/registers.h>
-
-/*
- * Fixed TLB entries to identity map the beginning of RAM
- */
-#define MMUIR_TEXT_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUIR_TEXT_L 0x000000000000009a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */
-
-#define MMUDR_CACHED_H 0x0000000000000003 | CONFIG_MEMORY_START
- /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUDR_CACHED_L 0x000000000000015a | CONFIG_MEMORY_START
- /* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */
-
-#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
-#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
-
-#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
-#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
-
- .text
-
- .global startup
-startup:
- /*
- * Prevent speculative fetch on device memory due to
- * uninitialized target registers.
- * This must be executed before the first branch.
- */
- ptabs/u r63, tr0
- ptabs/u r63, tr1
- ptabs/u r63, tr2
- ptabs/u r63, tr3
- ptabs/u r63, tr4
- ptabs/u r63, tr5
- ptabs/u r63, tr6
- ptabs/u r63, tr7
- synci
-
- /*
- * Set initial TLB entries for cached and uncached regions.
- * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
- */
- /* Clear ITLBs */
- pta 1f, tr1
- movi ITLB_FIXED, r21
- movi ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUIR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Clear DTLBs */
- pta 1f, tr1
- movi DTLB_FIXED, r21
- movi DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22
-1: putcfg r21, 0, r63 /* Clear MMUDR[n].PTEH.V */
- addi r21, TLB_STEP, r21
- bne r21, r22, tr1
-
- /* Map one big (512Mb) page for ITLB */
- movi ITLB_FIXED, r21
- movi MMUIR_TEXT_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */
- movi MMUIR_TEXT_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */
-
- /* Map one big CACHED (512Mb) page for DTLB */
- movi DTLB_FIXED, r21
- movi MMUDR_CACHED_L, r22 /* PTEL first */
- putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */
- movi MMUDR_CACHED_H, r22 /* PTEH last */
- putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */
-
- /* ICache */
- movi ICCR_BASE, r21
- movi ICCR0_INIT_VAL, r22
- movi ICCR1_INIT_VAL, r23
- putcfg r21, ICCR_REG0, r22
- putcfg r21, ICCR_REG1, r23
- synci
-
- /* OCache */
- movi OCCR_BASE, r21
- movi OCCR0_INIT_VAL, r22
- movi OCCR1_INIT_VAL, r23
- putcfg r21, OCCR_REG0, r22
- putcfg r21, OCCR_REG1, r23
- synco
-
- /*
- * Enable the MMU.
- * From here-on code can be non-PIC.
- */
- movi SR_HARMLESS | SR_ENABLE_MMU, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Set initial stack pointer */
- movi datalabel stack_start, r0
- ld.l r0, 0, r15
-
- /*
- * Clear bss
- */
- pt 1f, tr1
- movi datalabel __bss_start, r22
- movi datalabel _end, r23
-1: st.l r22, 0, r63
- addi r22, 4, r22
- bne r22, r23, tr1
-
- /*
- * Decompress the kernel.
- */
- pt decompress_kernel, tr0
- blink tr0, r18
-
- /*
- * Disable the MMU.
- */
- movi SR_HARMLESS, r22
- putcon r22, SSR
- movi 1f, r22
- putcon r22, SPC
- synco
- rte /* And now go into the hyperspace ... */
-1: /* ... that's the next instruction ! */
-
- /* Jump into the decompressed kernel */
- movi datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19
- ptabs r19, tr0
- blink tr0, r18
-
- /* Shouldn't return here, but just in case, loop forever */
- pt 1f, tr0
-1: blink tr0, r63
diff --git a/arch/sh/boot/compressed/lshrsi3.S b/arch/sh/boot/compressed/lshrsi3.S
deleted file mode 100644
index 5a8281b7e5161b..00000000000000
--- a/arch/sh/boot/compressed/lshrsi3.S
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#include "../../lib/lshrsi3.S"
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
deleted file mode 100644
index ca05c99a3d5b48..00000000000000
--- a/arch/sh/boot/compressed/misc.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SH by Stuart Menefy, Aug 1999
- *
- * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
- */
-
-#include <linux/uaccess.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * gzip declarations
- */
-
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-/* cache.c */
-#define CACHE_ENABLE 0
-#define CACHE_DISABLE 1
-int cache_control(unsigned int command);
-
-extern char input_data[];
-extern int input_len;
-static unsigned char *output;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _text; /* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE 0x400000
-#else
-#define HEAP_SIZE 0x10000
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-#ifdef CONFIG_KERNEL_XZ
-#include "../../../../lib/decompress_unxz.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-int puts(const char *s)
-{
- /* This should be updated to use the sh-sci routines */
- return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
- error("stack-protector: Kernel stack is corrupted\n");
-}
-
-/* Needed because vmlinux.lds.h references this */
-void ftrace_stub(void)
-{
-}
-void arch_ftrace_ops_list_func(void)
-{
-}
-
-#define stackalign 4
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
- unsigned long output_addr;
-
- output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
-#if defined(CONFIG_29BIT)
- output_addr |= P2SEG;
-#endif
-
- output = (unsigned char *)output_addr;
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
- puts("Uncompressing Linux... ");
- cache_control(CACHE_ENABLE);
- __decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
- cache_control(CACHE_DISABLE);
- puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index dd292b4b9082b5..00000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
- .rodata..compressed : ALIGN(8) {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
deleted file mode 100644
index 4a6dec9714a9e2..00000000000000
--- a/arch/sh/boot/dts/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USE_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE))
diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
deleted file mode 100644
index fa9562f78d532c..00000000000000
--- a/arch/sh/boot/dts/j2_mimas_v2.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-/ {
- compatible = "jcore,j2-soc";
- model = "J2 FPGA SoC on Mimas v2 board";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&aic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "jcore,j2";
- reg = <0>;
- clock-frequency = <50000000>;
- d-cache-size = <8192>;
- i-cache-size = <8192>;
- d-cache-block-size = <16>;
- i-cache-block-size = <16>;
- };
- };
-
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x4000000>;
- };
-
- aliases {
- serial0 = &uart0;
- spi0 = &spi0;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-
- soc@abcd0000 {
- compatible = "simple-bus";
- ranges = <0 0xabcd0000 0x100000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- aic: interrupt-controller@200 {
- compatible = "jcore,aic1";
- reg = <0x200 0x10>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- cache-controller@c0 {
- compatible = "jcore,cache";
- reg = <0xc0 4>;
- };
-
- timer@200 {
- compatible = "jcore,pit";
- reg = <0x200 0x30>;
- interrupts = <0x48>;
- };
-
- spi0: spi@40 {
- compatible = "jcore,spi2";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- spi-max-frequency = <25000000>;
-
- reg = <0x40 0x8>;
-
- sdcard@0 {
- compatible = "mmc-spi-slot";
- reg = <0>;
- spi-max-frequency = <25000000>;
- voltage-ranges = <3200 3400>;
- mode = <0>;
- };
- };
-
- uart0: serial@100 {
- clock-frequency = <125000000>;
- compatible = "xlnx,xps-uartlite-1.00.a";
- current-speed = <19200>;
- xlnx,use-parity = <0>;
- xlnx,data-bits = <8>;
- device_type = "serial";
- interrupts = <0x12>;
- port-number = <0>;
- reg = <0x100 0x10>;
- };
- };
-};
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
deleted file mode 100644
index c7c8be58400cd9..00000000000000
--- a/arch/sh/boot/romimage/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/romimage/Makefile
-#
-# create an romImage file suitable for burning to flash/mmc from zImage
-#
-
-targets := vmlinux head.o zeropage.bin piggy.o
-load-y := 0
-
-mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM
-mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o
-load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y)
-obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y)
-
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
- -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
-
-OBJCOPYFLAGS += -j .empty_zero_page
-
-$(obj)/zeropage.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
deleted file mode 100644
index 81a0652a3dff4b..00000000000000
--- a/arch/sh/boot/romimage/head.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/sh/boot/romimage/head.S
- *
- * Board specific setup code, executed before zImage loader
- */
-
-.text
- #include <asm/page.h>
-
- .global romstart
-romstart:
- /* include board specific setup code */
-#include <mach/romimage.h>
-
-#ifdef CONFIG_ROMIMAGE_MMCIF
- /* load the romImage to above the empty zero page */
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l bytes_to_load, r5
- mov.l loader_function, r7
- jsr @r7
- mov r4, r15
-
- mov.l empty_zero_page_dst, r4
- mov.l empty_zero_page_dst_adj, r5
- add r5, r4
- mov.l loaded_code_offs, r5
- add r5, r4
- jmp @r4
- nop
-
- .balign 4
-empty_zero_page_dst_adj:
- .long PAGE_SIZE
-bytes_to_load:
- .long end_data - romstart
-loader_function:
- .long mmcif_loader
-loaded_code_offs:
- .long loaded_code - romstart
-loaded_code:
-#endif /* CONFIG_ROMIMAGE_MMCIF */
-
- /* copy the empty_zero_page contents to where vmlinux expects it */
- mova extra_data_pos, r0
- mov.l extra_data_size, r1
- add r1, r0
- mov.l empty_zero_page_dst, r1
- mov #(PAGE_SHIFT - 4), r4
- mov #1, r3
- shld r4, r3 /* r3 = PAGE_SIZE / 16 */
-
-1:
- mov.l @r0, r4
- mov.l @(4, r0), r5
- mov.l @(8, r0), r6
- mov.l @(12, r0), r7
- add #16,r0
- mov.l r4, @r1
- mov.l r5, @(4, r1)
- mov.l r6, @(8, r1)
- mov.l r7, @(12, r1)
- dt r3
- add #16,r1
- bf 1b
-
- /* jump to the zImage entry point located after the zero page data */
- mov #PAGE_SHIFT, r4
- mov #1, r1
- shld r4, r1
- mova extra_data_pos, r0
- add r1, r0
- mov.l extra_data_size, r1
- add r1, r0
- jmp @r0
- nop
-
- .align 2
-empty_zero_page_dst:
- .long _text
-extra_data_pos:
-extra_data_size:
- .long zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
deleted file mode 100644
index d30123d859e054..00000000000000
--- a/arch/sh/boot/romimage/mmcif-sh7724.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * sh7724 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_data/sh_mmcif.h>
-#include <mach/romimage.h>
-
-#define MMCIF_BASE (void __iomem *)0xa4ca0000
-
-#define MSTPCR2 0xa4150038
-#define PTWCR 0xa4050146
-#define PTXCR 0xa4050148
-#define PSELA 0xa405014e
-#define PSELE 0xa4050156
-#define HIZCRC 0xa405015c
-#define DRVCRA 0xa405018a
-
-enum {
- MMCIF_PROGRESS_ENTER,
- MMCIF_PROGRESS_INIT,
- MMCIF_PROGRESS_LOAD,
- MMCIF_PROGRESS_DONE
-};
-
-/* SH7724 specific MMCIF loader
- *
- * loads the romImage from an MMC card starting from block 512
- * use the following line to write the romImage to an MMC card
- * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
- */
-asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
-{
- mmcif_update_progress(MMCIF_PROGRESS_ENTER);
-
- /* enable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
-
- /* setup pins D7-D0 */
- __raw_writew(0x0000, PTWCR);
-
- /* setup pins MMC_CLK, MMC_CMD */
- __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
-
- /* select D3-D0 pin function */
- __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
-
- /* select D7-D4 pin function */
- __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
-
- /* disable Hi-Z for the MMC pins */
- __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
-
- /* high drive capability for MMC pins */
- __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
-
- mmcif_update_progress(MMCIF_PROGRESS_INIT);
-
- /* setup MMCIF hardware */
- sh_mmcif_boot_init(MMCIF_BASE);
-
- mmcif_update_progress(MMCIF_PROGRESS_LOAD);
-
- /* load kernel via MMCIF interface */
- sh_mmcif_boot_do_read(MMCIF_BASE, 512,
- (no_bytes + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS,
- buf);
-
- /* disable clock to the MMCIF hardware block */
- __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
-
- mmcif_update_progress(MMCIF_PROGRESS_DONE);
-}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
deleted file mode 100644
index 590394e2f5f2e4..00000000000000
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ /dev/null
@@ -1,8 +0,0 @@
-SECTIONS
-{
- .text : {
- zero_page_pos = .;
- *(.data)
- end_data = .;
- }
-}
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
deleted file mode 100644
index efde2edb562780..00000000000000
--- a/arch/sh/cchips/Kconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Companion Chips"
-
-config HD6446X_SERIES
- bool
-
-choice
- prompt "HD6446x options"
- depends on HD6446X_SERIES
- default HD64461
-
-config HD64461
- bool "Hitachi HD64461 companion chip support"
- help
- The Hitachi HD64461 provides an interface for
- the SH7709 CPU, supporting a LCD controller,
- CRT color controller, IrDA up to 4 Mbps, and a
- PCMCIA controller supporting 2 slots.
-
- More information is available at
- <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
-
- Say Y if you want support for the HD64461.
- Otherwise, say N.
-
-endchoice
-
-# These will also be split into the Kconfig's below
-config HD64461_IRQ
- int "HD64461 IRQ"
- depends on HD64461
- default "36"
- help
- The default setting of the HD64461 IRQ is 36.
-
- Do not change this unless you know what you are doing.
-
-config HD64461_ENABLER
- bool "HD64461 PCMCIA enabler"
- depends on HD64461
- help
- Say Y here if you want to enable PCMCIA support
- via the HD64461 companion chip.
- Otherwise, say N.
-
-endmenu
diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile
deleted file mode 100644
index 6673e0abef2ed8..00000000000000
--- a/arch/sh/cchips/hd6446x/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HD64461) += hd64461.o
-
-ccflags-y := -Werror
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
deleted file mode 100644
index f3fba967445aca..00000000000000
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2000 YAEGASHI Takeshi
- * Hitachi HD64461 companion chip support
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hd64461.h>
-
-/* This belongs in cpu specific */
-#define INTC_ICR1 0xA4140010UL
-
-static void hd64461_mask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr |= mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_unmask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned short nimr;
- unsigned short mask = 1 << (irq - HD64461_IRQBASE);
-
- nimr = __raw_readw(HD64461_NIMR);
- nimr &= ~mask;
- __raw_writew(nimr, HD64461_NIMR);
-}
-
-static void hd64461_mask_and_ack_irq(struct irq_data *data)
-{
- hd64461_mask_irq(data);
-
-#ifdef CONFIG_HD64461_ENABLER
- if (data->irq == HD64461_IRQBASE + 13)
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-}
-
-static struct irq_chip hd64461_irq_chip = {
- .name = "HD64461-IRQ",
- .irq_mask = hd64461_mask_irq,
- .irq_mask_ack = hd64461_mask_and_ack_irq,
- .irq_unmask = hd64461_unmask_irq,
-};
-
-static void hd64461_irq_demux(struct irq_desc *desc)
-{
- unsigned short intv = __raw_readw(HD64461_NIRR);
- unsigned int ext_irq = HD64461_IRQBASE;
-
- intv &= (1 << HD64461_IRQ_NUM) - 1;
-
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
-
- generic_handle_irq(ext_irq);
- }
-}
-
-int __init setup_hd64461(void)
-{
- int irq_base, i;
-
- printk(KERN_INFO
- "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
- HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
- HD64461_IRQBASE + 15);
-
-/* Should be at processor specific part.. */
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
- __raw_writew(0x2240, INTC_ICR1);
-#endif
- __raw_writew(0xffff, HD64461_NIMR);
-
- irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
- if (IS_ERR_VALUE(irq_base)) {
- pr_err("%s: failed hooking irqs for HD64461\n", __func__);
- return irq_base;
- }
-
- for (i = 0; i < 16; i++)
- irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
- irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-#ifdef CONFIG_HD64461_ENABLER
- printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
- __raw_writeb(0x4c, HD64461_PCC1CSCIER);
- __raw_writeb(0x00, HD64461_PCC1CSCR);
-#endif
-
- return 0;
-}
-
-module_init(setup_hd64461);
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
deleted file mode 100644
index 4d83576b89c665..00000000000000
--- a/arch/sh/configs/ap325rxa_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7723=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_AP325RXA=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SH_FLCTL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/apsh4a3a_defconfig b/arch/sh/configs/apsh4a3a_defconfig
deleted file mode 100644
index 99931a13a74da9..00000000000000
--- a/arch/sh/configs/apsh4a3a_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4A3A=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
deleted file mode 100644
index d9fb124bf015a2..00000000000000
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_APSH4AD0A=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH7785FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
deleted file mode 100644
index 6a82c7b8ff32b8..00000000000000
--- a/arch/sh/configs/dreamcast_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7091=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_DREAMCAST=y
-CONFIG_SH_PCLK_FREQ=49876504
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_NR_DMA_CHANNELS=9
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
-CONFIG_MAPLE=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_GDROM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_MAPLE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PVR2=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
deleted file mode 100644
index 5c60e71d839e05..00000000000000
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
deleted file mode 100644
index b52e14ccb450d4..00000000000000
--- a/arch/sh/configs/ecovec24_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_ECOVEC=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2007=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-CONFIG_SND_FSI_DA7210=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_SDHI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
deleted file mode 100644
index 9ee35269bee260..00000000000000
--- a/arch/sh/configs/edosk7705_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PRINTK is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_SH_EDOSK7705=y
-CONFIG_SH_PCLK_FREQ=31250000
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
deleted file mode 100644
index f427a95bcd21e5..00000000000000
--- a/arch/sh/configs/edosk7760_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_LOCALVERSION="_edosk7760"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7760=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_EDOSK7760=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
-CONFIG_DEBUG_DEVRES=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_8=y
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
-CONFIG_MTD_MAP_BANK_WIDTH_32=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=26000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH7760=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=m
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
deleted file mode 100644
index 2804cb760a7615..00000000000000
--- a/arch/sh/configs/espt_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_ESPT=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
deleted file mode 100644
index 70e6605d7f7ef7..00000000000000
--- a/arch/sh/configs/hp6xx_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0d000000
-CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_HP6XX=y
-CONFIG_SH_PCLK_FREQ=22110000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HD64461_ENABLER=y
-CONFIG_PCCARD=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_HP6XX=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_HIT=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_PEARL_8x8=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
deleted file mode 100644
index 2eb81ebe3888bf..00000000000000
--- a/arch/sh/configs/j2_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_SUBTYPE_J2=y
-CONFIG_MEMORY_START=0x10000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_DEVICE_TREE=y
-CONFIG_SH_JCORE_SOC=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttyUL0 earlycon"
-CONFIG_BINFMT_ELF_FDPIC=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-CONFIG_SERIAL_EARLYCON=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_JCORE=y
-CONFIG_WATCHDOG=y
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_CLKSRC_JCORE_PIT=y
-CONFIG_JCORE_AIC=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_FAT_DEFAULT_UTF8=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_UTF8=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
deleted file mode 100644
index 04436b4fbd7695..00000000000000
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 quiet"
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
deleted file mode 100644
index 833404490cfeea..00000000000000
--- a/arch/sh/configs/kfr2r09_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_KFR2R09=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_NO_HZ=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
-# CONFIG_SUSPEND is not set
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_UBI=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
deleted file mode 100644
index 7037320b654ad6..00000000000000
--- a/arch/sh/configs/landisk_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LANDISK=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_ATALK=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_ATP867X=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_REISERFS_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_SMB_FS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
deleted file mode 100644
index 05e4ac6fed5f9c..00000000000000
--- a/arch/sh/configs/lboxre2_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_LBOX_RE2=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
deleted file mode 100644
index ef1d98e35c91f7..00000000000000
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7720=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_MEMORY_SIZE=0x03F00000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_MAGIC_PANEL_R2=y
-CONFIG_SH_PCLK_FREQ=24000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=48
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
deleted file mode 100644
index e9825196dd66af..00000000000000
--- a/arch/sh/configs/microdev_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH4202_MICRODEV=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-CONFIG_SUPERHYWAY=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
deleted file mode 100644
index 4859cd30cfc4c6..00000000000000
--- a/arch/sh/configs/migor_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_SH_MIGOR=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_MIGOR=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
deleted file mode 100644
index f42e4867ddc1a7..00000000000000
--- a/arch/sh/configs/polaris_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7709=y
-CONFIG_MEMORY_START=0x0C000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_FPU_EMU=y
-CONFIG_SH_POLARIS=y
-CONFIG_SH_PCLK_FREQ=33000000
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_100=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_COMPAT=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_SG=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
deleted file mode 100644
index e527cd60a19105..00000000000000
--- a/arch/sh/configs/r7780mp_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-CONFIG_8139CP=m
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_8129=y
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
-CONFIG_E1000=m
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_THERMAL=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
deleted file mode 100644
index a3f952a83d970f..00000000000000
--- a/arch/sh/configs/r7785rp_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_HIGHLANDER=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_PUSH_SWITCH=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_AX88796_93CX6=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HIGHLANDER=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_4KSTACKS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
deleted file mode 100644
index 376e95fa77bc68..00000000000000
--- a/arch/sh/configs/rsk7201_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_AIO is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7201=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=40000000
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
deleted file mode 100644
index 1d5fd67a3949b4..00000000000000
--- a/arch/sh/configs/rsk7203_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7203=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-CONFIG_SH_PCLK_FREQ=16670800
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_SG=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig
deleted file mode 100644
index f7b9c528c6df87..00000000000000
--- a/arch/sh/configs/rsk7264_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_LOCALVERSION="uClinux RSK2+SH7264"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_COUNTERS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CPU_SUBTYPE_SH7264=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig
deleted file mode 100644
index 4bff14fb185dbb..00000000000000
--- a/arch/sh/configs/rsk7269_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_CPU_SUBTYPE_SH7269=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RSK=y
-# CONFIG_SH_TIMER_MTU2 is not set
-CONFIG_SH_PCLK_FREQ=66700000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
deleted file mode 100644
index 96263a4912b726..00000000000000
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_1=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
deleted file mode 100644
index 92e586e6c97432..00000000000000
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_YMFPCI=m
-CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
deleted file mode 100644
index 41cb588ca99cb7..00000000000000
--- a/arch/sh/configs/sdk7780_defconfig
+++ /dev/null
@@ -1,139 +0,0 @@
-CONFIG_LOCALVERSION="_SDK7780"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_RELAY=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SDK7780=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_NET_SCHED=y
-CONFIG_PARPORT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NETCONSOLE=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_DEBUG=y
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_HUGETLBFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
deleted file mode 100644
index 97b7356639ed82..00000000000000
--- a/arch/sh/configs/sdk7786_defconfig
+++ /dev/null
@@ -1,217 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_IOSCHED_BFQ=y
-CONFIG_BFQ_GROUP_IOSCHED=y
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_NUMA=y
-CONFIG_HUGETLB_PAGE_SIZE_64MB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_KSM=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SDK7786=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_SH_DMA=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_INTC_BALANCING=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER_INJECT=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_PHRAM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_SH_FLCTL=m
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_DEBUG=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX6900=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PCI_GENERIC=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=m
-CONFIG_FSCACHE=m
-CONFIG_CACHEFILES=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_UBIFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_LATENCYTOP=y
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_FUNCTION_GRAPH_TRACER is not set
-CONFIG_DMA_API_DEBUG=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DWARF_UNWINDER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
deleted file mode 100644
index 78e0e7be57ee1f..00000000000000
--- a/arch/sh/configs/se7206_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_UID16 is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7206=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7206_SOLUTION_ENGINE=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
deleted file mode 100644
index 5d6c19338ebf29..00000000000000
--- a/arch/sh/configs/se7343_defconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7343=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_DM9601=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=4
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_ISP116X_HCD=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
deleted file mode 100644
index 71a672c307168e..00000000000000
--- a/arch/sh/configs/se7619_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_7619_SOLUTION_ENGINE=y
-CONFIG_HZ_100=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
deleted file mode 100644
index ed00a6eeadf55e..00000000000000
--- a/arch/sh/configs/se7705_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7705=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_SYSFS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
deleted file mode 100644
index 36356223d51c83..00000000000000
--- a/arch/sh/configs/se7712_defconfig
+++ /dev/null
@@ -1,101 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7712=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
deleted file mode 100644
index 46c5a263a23925..00000000000000
--- a/arch/sh/configs/se7721_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_BUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7721=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_ADC is not set
-CONFIG_SH_7721_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
deleted file mode 100644
index 09e45581744743..00000000000000
--- a/arch/sh/configs/se7722_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7722=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
deleted file mode 100644
index d817df7cc4a72a..00000000000000
--- a/arch/sh/configs/se7724_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7724_SOLUTION_ENGINE=y
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_DVB_CORE=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SUPERH is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_SH4_FSI=m
-CONFIG_SND_FSI_AK4642=y
-CONFIG_SND_SOC_ALL_CODECS=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
deleted file mode 100644
index 4defc7628a498a..00000000000000
--- a/arch/sh/configs/se7750_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7750=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_STNIC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
deleted file mode 100644
index 4a024065bb7501..00000000000000
--- a/arch/sh/configs/se7751_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_7751_SOLUTION_ENGINE=y
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
deleted file mode 100644
index dcd85b858ac8ca..00000000000000
--- a/arch/sh/configs/se7780_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-CONFIG_SH_PCLK_FREQ=33333333
-CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_THERMAL=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/secureedge5410_defconfig b/arch/sh/configs/secureedge5410_defconfig
deleted file mode 100644
index 8422599cfb04dc..00000000000000
--- a/arch/sh/configs/secureedge5410_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SECUREEDGE5410=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1302=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
deleted file mode 100644
index 9fcf68b22dba9a..00000000000000
--- a/arch/sh/configs/sh03_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH03=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig
deleted file mode 100644
index 259c69e3fa2279..00000000000000
--- a/arch/sh/configs/sh2007_defconfig
+++ /dev/null
@@ -1,199 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7780=y
-CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_VSYSCALL is not set
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH2007=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_NR_DMA_CHANNELS_BOOL=y
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
-CONFIG_PCCARD=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NET_PKTGEN=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SRP_ATTRS=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_EQUALIZER=y
-CONFIG_TUN=y
-CONFIG_VETH=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_SSB=y
-CONFIG_FB=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_DMADEVICES=y
-CONFIG_TIMB_DMA=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=932
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
deleted file mode 100644
index 0d814770b07fe9..00000000000000
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7710=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_PCLK_FREQ=32768000
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_U32=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_PHONE=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
deleted file mode 100644
index cbc9389a89a8c0..00000000000000
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
deleted file mode 100644
index 2579dc4bc0c8f6..00000000000000
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7757=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x0f000000
-CONFIG_PMB=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH7757LCR=y
-CONFIG_HEARTBEAT=y
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_WLAN is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_SPI=y
-CONFIG_SPI_SH=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SH=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_SH=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_SQUASHFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
deleted file mode 100644
index 8a6a446f9eb88a..00000000000000
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7763=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_SH_SH7763RDP=y
-CONFIG_SH_PCLK_FREQ=66666666
-CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SH_ETH=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=3
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_SH7760=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
deleted file mode 100644
index ee2357deba0f1c..00000000000000
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-# CONFIG_UID16 is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7770=y
-CONFIG_SH_PCLK_FREQ=41666666
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_JUMP=y
-CONFIG_PM=y
-CONFIG_HIBERNATION=y
-CONFIG_CPU_IDLE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
deleted file mode 100644
index 781ff13227fc99..00000000000000
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ /dev/null
@@ -1,149 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_GCOV_KERNEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x20000000
-CONFIG_PMB=y
-CONFIG_HUGETLB_PAGE_SIZE_1MB=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SPECULATIVE_EXECUTION=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PREEMPT=y
-CONFIG_INTC_USERIMASK=y
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_R8169=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=y
-CONFIG_MFD_SM501=y
-# CONFIG_VGA_ARB is not set
-CONFIG_FB=y
-CONFIG_FB_KYRO=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_VERBOSE=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_CMIPCI=y
-CONFIG_SND_EMU10K1=y
-# CONFIG_SND_SUPERH is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_KMEMLEAK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_LATENCYTOP=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
deleted file mode 100644
index 1b88929083f786..00000000000000
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7785=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_SH7785LCR=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_R8169=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
deleted file mode 100644
index e078b193a78a89..00000000000000
--- a/arch/sh/configs/shmin_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UID16 is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7706=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x00800000
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_SH_ADC is not set
-CONFIG_SH_SHMIN=y
-CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_SYSFS is not set
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
deleted file mode 100644
index aa353dff7f1931..00000000000000
--- a/arch/sh/configs/shx3_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_RCU_TRACE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SHX3=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_NUMA=y
-CONFIG_PAGE_SIZE_64KB=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_X3PROTO=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_SH_CPU_FREQ=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_UIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_VM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
deleted file mode 100644
index 73a0d68b0de6ce..00000000000000
--- a/arch/sh/configs/titan_defconfig
+++ /dev/null
@@ -1,272 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x08030000
-CONFIG_MEMORY_SIZE=0x7fd0000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_TITAN=y
-CONFIG_SH_PCLK_FREQ=30000000
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_DIAG=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139_OLD_RX_RESET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_WATCHDOG=y
-CONFIG_SH_WDT=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
deleted file mode 100644
index 103b81ec1ffb91..00000000000000
--- a/arch/sh/configs/ul2_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7366=y
-CONFIG_MEMORY_SIZE=0x01f00000
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-# CONFIG_SH_DSP is not set
-# CONFIG_SH_TIMER_CMT is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
deleted file mode 100644
index 8fc687c98fd195..00000000000000
--- a/arch/sh/configs/urquell_defconfig
+++ /dev/null
@@ -1,147 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-# CONFIG_PROC_PID_CPUSET is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7786=y
-CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_SH_STORE_QUEUES=y
-CONFIG_SH_URQUELL=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HEARTBEAT=y
-CONFIG_KEXEC=y
-CONFIG_SECCOMP=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEASPM_DEBUG=y
-CONFIG_PCI_DEBUG=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_SKY2=y
-CONFIG_SKY2_DEBUG=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_PCA_PLATFORM=y
-CONFIG_MFD_SM501=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=m
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SH=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FTRACE is not set
-# CONFIG_DUMP_CODE is not set
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
deleted file mode 100644
index 80a45ad2852fdf..00000000000000
--- a/arch/sh/drivers/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "arch/sh/drivers/dma/Kconfig"
-source "arch/sh/cchips/Kconfig"
-
-menu "Additional SuperH Device Drivers"
-
-config HEARTBEAT
- bool "Heartbeat LED"
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PUSH_SWITCH
- tristate "Push switch support"
- help
- This enables support for the push switch framework, a simple
- framework that allows for sysfs driven switch status reporting.
-
-endmenu
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
deleted file mode 100644
index 56b0acace6e7c8..00000000000000
--- a/arch/sh/drivers/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific device drivers.
-#
-
-obj-y += dma/ platform_early.o
-
-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
-obj-$(CONFIG_HEARTBEAT) += heartbeat.o
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
deleted file mode 100644
index 7d54f284ce10fb..00000000000000
--- a/arch/sh/drivers/dma/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "DMA support"
-
-
-config SH_DMA
- bool "SuperH on-chip DMA controller (DMAC) support"
- depends on CPU_SH3 || CPU_SH4
- default n
-
-config SH_DMA_IRQ_MULTI
- bool
- depends on SH_DMA
- default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
- CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
- CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7760
-
-config SH_DMA_API
- depends on SH_DMA
- bool "SuperH DMA API support"
- default n
- help
- SH_DMA_API always enabled DMA API of used SuperH.
- If you want to use DMA ENGINE, you must not enable this.
- Please enable DMA_ENGINE and SH_DMAE.
-
-config NR_ONCHIP_DMA_CHANNELS
- int
- depends on SH_DMA
- default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
- CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091
- default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
- CPU_SUBTYPE_SH7760
- default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
- default "6"
- help
- This allows you to specify the number of channels that the on-chip
- DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
- SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
-
-config SH_DMABRG
- bool "SH7760 DMABRG support"
- depends on CPU_SUBTYPE_SH7760
- help
- The DMABRG does data transfers from main memory to Audio/USB units
- of the SH7760.
- Say Y if you want to use Audio/USB DMA on your SH7760 board.
-
-config PVR2_DMA
- tristate "PowerVR 2 DMAC support"
- depends on SH_DREAMCAST && SH_DMA
- help
- Selecting this will enable support for the PVR2 DMA controller.
- As this chains off of the on-chip DMAC, that must also be
- enabled by default.
-
- This is primarily used by the pvr2fb framebuffer driver for
- certain optimizations, but is not necessary for functionality.
-
- If in doubt, say N.
-
-config G2_DMA
- tristate "G2 Bus DMA support"
- depends on SH_DREAMCAST && SH_DMA_API
- help
- This enables support for the DMA controller for the Dreamcast's
- G2 bus. Drivers that want this will generally enable this on
- their own.
-
- If in doubt, say N.
-
-endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
deleted file mode 100644
index d2fdd56208f6e3..00000000000000
--- a/arch/sh/drivers/dma/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH DMA specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
-obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
-obj-$(CONFIG_G2_DMA) += dma-g2.o
-obj-$(CONFIG_SH_DMABRG) += dmabrg.o
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
deleted file mode 100644
index ab9170494dcc29..00000000000000
--- a/arch/sh/drivers/dma/dma-api.c
+++ /dev/null
@@ -1,417 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-api.c
- *
- * SuperH-specific DMA management API
- *
- * Copyright (C) 2003, 2004, 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-
-DEFINE_SPINLOCK(dma_spin_lock);
-static LIST_HEAD(registered_dmac_list);
-
-struct dma_info *get_dma_info(unsigned int chan)
-{
- struct dma_info *info;
-
- /*
- * Look for each DMAC's range to determine who the owner of
- * the channel is.
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if ((chan < info->first_vchannel_nr) ||
- (chan >= info->first_vchannel_nr + info->nr_channels))
- continue;
-
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info);
-
-struct dma_info *get_dma_info_by_name(const char *dmac_name)
-{
- struct dma_info *info;
-
- list_for_each_entry(info, ®istered_dmac_list, list) {
- if (dmac_name && (strcmp(dmac_name, info->name) != 0))
- continue;
- else
- return info;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_info_by_name);
-
-static unsigned int get_nr_channels(void)
-{
- struct dma_info *info;
- unsigned int nr = 0;
-
- if (unlikely(list_empty(®istered_dmac_list)))
- return nr;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- nr += info->nr_channels;
-
- return nr;
-}
-
-struct dma_channel *get_dma_channel(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel;
- int i;
-
- if (unlikely(!info))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (channel->vchan == chan)
- return channel;
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(get_dma_channel);
-
-int get_dma_residue(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->get_residue)
- return info->ops->get_residue(channel);
-
- return 0;
-}
-EXPORT_SYMBOL(get_dma_residue);
-
-static int search_cap(const char **haystack, const char *needle)
-{
- const char **p;
-
- for (p = haystack; *p; p++)
- if (strcmp(*p, needle) == 0)
- return 1;
-
- return 0;
-}
-
-/**
- * request_dma_bycap - Allocate a DMA channel based on its capabilities
- * @dmac: List of DMA controllers to search
- * @caps: List of capabilities
- *
- * Search all channels of all DMA controllers to find a channel which
- * matches the requested capabilities. The result is the channel
- * number if a match is found, or %-ENODEV if no match is found.
- *
- * Note that not all DMA controllers export capabilities, in which
- * case they can never be allocated using this API, and so
- * request_dma() must be used specifying the channel number.
- */
-int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id)
-{
- unsigned int found = 0;
- struct dma_info *info;
- const char **p;
- int i;
-
- BUG_ON(!dmac || !caps);
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(*dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (!found)
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = &info->channels[i];
-
- if (unlikely(!channel->caps))
- continue;
-
- for (p = caps; *p; p++) {
- if (!search_cap(channel->caps, *p))
- break;
- if (request_dma(channel->chan, dev_id) == 0)
- return channel->chan;
- }
- }
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(request_dma_bycap);
-
-int dmac_search_free_channel(const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(0);
- int i;
-
- for (i = 0; i < info->nr_channels; i++) {
- channel = &info->channels[i];
- if (unlikely(!channel))
- return -ENODEV;
-
- if (atomic_read(&channel->busy) == 0)
- break;
- }
-
- if (info->ops->request) {
- int result = info->ops->request(channel);
- if (result)
- return result;
-
- atomic_set(&channel->busy, 1);
- return channel->chan;
- }
-
- return -ENOSYS;
-}
-
-int request_dma(unsigned int chan, const char *dev_id)
-{
- struct dma_channel *channel = { 0 };
- struct dma_info *info = get_dma_info(chan);
- int result;
-
- channel = get_dma_channel(chan);
- if (atomic_xchg(&channel->busy, 1))
- return -EBUSY;
-
- strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id));
-
- if (info->ops->request) {
- result = info->ops->request(channel);
- if (result)
- atomic_set(&channel->busy, 0);
-
- return result;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(request_dma);
-
-void free_dma(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->free)
- info->ops->free(channel);
-
- atomic_set(&channel->busy, 0);
-}
-EXPORT_SYMBOL(free_dma);
-
-void dma_wait_for_completion(unsigned int chan)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (channel->flags & DMA_TEI_CAPABLE) {
- wait_event(channel->wait_queue,
- (info->ops->get_residue(channel) == 0));
- return;
- }
-
- while (info->ops->get_residue(channel))
- cpu_relax();
-}
-EXPORT_SYMBOL(dma_wait_for_completion);
-
-int register_chan_caps(const char *dmac, struct dma_chan_caps *caps)
-{
- struct dma_info *info;
- unsigned int found = 0;
- int i;
-
- list_for_each_entry(info, ®istered_dmac_list, list)
- if (strcmp(dmac, info->name) == 0) {
- found = 1;
- break;
- }
-
- if (unlikely(!found))
- return -ENODEV;
-
- for (i = 0; i < info->nr_channels; i++, caps++) {
- struct dma_channel *channel;
-
- if ((info->first_channel_nr + i) != caps->ch_num)
- return -EINVAL;
-
- channel = &info->channels[i];
- channel->caps = caps->caplist;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(register_chan_caps);
-
-void dma_configure_channel(unsigned int chan, unsigned long flags)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->configure)
- info->ops->configure(channel, flags);
-}
-EXPORT_SYMBOL(dma_configure_channel);
-
-int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- channel->sar = from;
- channel->dar = to;
- channel->count = size;
- channel->mode = mode;
-
- return info->ops->xfer(channel);
-}
-EXPORT_SYMBOL(dma_xfer);
-
-int dma_extend(unsigned int chan, unsigned long op, void *param)
-{
- struct dma_info *info = get_dma_info(chan);
- struct dma_channel *channel = get_dma_channel(chan);
-
- if (info->ops->extend)
- return info->ops->extend(channel, op, param);
-
- return -ENOSYS;
-}
-EXPORT_SYMBOL(dma_extend);
-
-static int dma_proc_show(struct seq_file *m, void *v)
-{
- struct dma_info *info = v;
-
- if (list_empty(®istered_dmac_list))
- return 0;
-
- /*
- * Iterate over each registered DMAC
- */
- list_for_each_entry(info, ®istered_dmac_list, list) {
- int i;
-
- /*
- * Iterate over each channel
- */
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *channel = info->channels + i;
-
- if (!(channel->flags & DMA_CONFIGURED))
- continue;
-
- seq_printf(m, "%2d: %14s %s\n", i,
- info->name, channel->dev_id);
- }
- }
-
- return 0;
-}
-
-int register_dmac(struct dma_info *info)
-{
- unsigned int total_channels, i;
-
- INIT_LIST_HEAD(&info->list);
-
- printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
- info->name, info->nr_channels, info->nr_channels > 1 ? "s" : "");
-
- BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
-
- info->pdev = platform_device_register_simple(info->name, -1,
- NULL, 0);
- if (IS_ERR(info->pdev))
- return PTR_ERR(info->pdev);
-
- /*
- * Don't touch pre-configured channels
- */
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) {
- unsigned int size;
-
- size = sizeof(struct dma_channel) * info->nr_channels;
-
- info->channels = kzalloc(size, GFP_KERNEL);
- if (!info->channels)
- return -ENOMEM;
- }
-
- total_channels = get_nr_channels();
- info->first_vchannel_nr = total_channels;
- for (i = 0; i < info->nr_channels; i++) {
- struct dma_channel *chan = &info->channels[i];
-
- atomic_set(&chan->busy, 0);
-
- chan->chan = info->first_channel_nr + i;
- chan->vchan = info->first_channel_nr + i + total_channels;
-
- memcpy(chan->dev_id, "Unused", 7);
-
- if (info->flags & DMAC_CHANNELS_TEI_CAPABLE)
- chan->flags |= DMA_TEI_CAPABLE;
-
- init_waitqueue_head(&chan->wait_queue);
- dma_create_sysfs_files(chan, info);
- }
-
- list_add(&info->list, ®istered_dmac_list);
-
- return 0;
-}
-EXPORT_SYMBOL(register_dmac);
-
-void unregister_dmac(struct dma_info *info)
-{
- unsigned int i;
-
- for (i = 0; i < info->nr_channels; i++)
- dma_remove_sysfs_files(info->channels + i, info);
-
- if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
- kfree(info->channels);
-
- list_del(&info->list);
- platform_device_unregister(info->pdev);
-}
-EXPORT_SYMBOL(unregister_dmac);
-
-static int __init dma_api_init(void)
-{
- printk(KERN_NOTICE "DMA: Registering DMA API.\n");
- return proc_create_single("dma", 0, NULL, dma_proc_show) ? 0 : -ENOMEM;
-}
-subsys_initcall(dma_api_init);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("DMA API for SuperH");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
deleted file mode 100644
index 52a8ae5e30d2fb..00000000000000
--- a/arch/sh/drivers/dma/dma-g2.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-g2.c
- *
- * G2 bus DMA support
- *
- * Copyright (C) 2003 - 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <asm/cacheflush.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-
-struct g2_channel {
- unsigned long g2_addr; /* G2 bus address */
- unsigned long root_addr; /* Root bus (SH-4) address */
- unsigned long size; /* Size (in bytes), 32-byte aligned */
- unsigned long direction; /* Transfer direction */
- unsigned long ctrl; /* Transfer control */
- unsigned long chan_enable; /* Channel enable */
- unsigned long xfer_enable; /* Transfer enable */
- unsigned long xfer_stat; /* Transfer status */
-} __attribute__ ((aligned(32)));
-
-struct g2_status {
- unsigned long g2_addr;
- unsigned long root_addr;
- unsigned long size;
- unsigned long status;
-} __attribute__ ((aligned(16)));
-
-struct g2_dma_info {
- struct g2_channel channel[G2_NR_DMA_CHANNELS];
- unsigned long pad1[G2_NR_DMA_CHANNELS];
- unsigned long wait_state;
- unsigned long pad2[10];
- unsigned long magic;
- struct g2_status status[G2_NR_DMA_CHANNELS];
-} __attribute__ ((aligned(256)));
-
-static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
-
-#define g2_bytes_remaining(i) \
- ((g2_dma->channel[i].size - \
- g2_dma->status[i].size) & 0x0fffffff)
-
-static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
-{
- int i;
-
- for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
- if (g2_dma->status[i].status & 0x20000000) {
- unsigned int bytes = g2_bytes_remaining(i);
-
- if (likely(bytes == 0)) {
- struct dma_info *info = dev_id;
- struct dma_channel *chan = info->channels + i;
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
- }
- }
- }
-
- return IRQ_NONE;
-}
-
-static int g2_enable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 1;
- g2_dma->channel[chan_nr].xfer_enable = 1;
-
- return 0;
-}
-
-static int g2_disable_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- g2_dma->channel[chan_nr].chan_enable = 0;
- g2_dma->channel[chan_nr].xfer_enable = 0;
-
- return 0;
-}
-
-static int g2_xfer_dma(struct dma_channel *chan)
-{
- unsigned int chan_nr = chan->chan;
-
- if (chan->sar & 31) {
- printk("g2dma: unaligned source 0x%lx\n", chan->sar);
- return -EINVAL;
- }
-
- if (chan->dar & 31) {
- printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
- return -EINVAL;
- }
-
- /* Align the count */
- if (chan->count & 31)
- chan->count = (chan->count + (32 - 1)) & ~(32 - 1);
-
- /* Fixup destination */
- chan->dar += 0xa0800000;
-
- /* Fixup direction */
- chan->mode = !chan->mode;
-
- flush_icache_range((unsigned long)chan->sar, chan->count);
-
- g2_disable_dma(chan);
-
- g2_dma->channel[chan_nr].g2_addr = chan->dar & 0x1fffffe0;
- g2_dma->channel[chan_nr].root_addr = chan->sar & 0x1fffffe0;
- g2_dma->channel[chan_nr].size = (chan->count & ~31) | 0x80000000;
- g2_dma->channel[chan_nr].direction = chan->mode;
-
- /*
- * bit 0 - ???
- * bit 1 - if set, generate a hardware event on transfer completion
- * bit 2 - ??? something to do with suspend?
- */
- g2_dma->channel[chan_nr].ctrl = 5; /* ?? */
-
- g2_enable_dma(chan);
-
- /* debug cruft */
- pr_debug("count, sar, dar, mode, ctrl, chan, xfer: %ld, 0x%08lx, "
- "0x%08lx, %ld, %ld, %ld, %ld\n",
- g2_dma->channel[chan_nr].size,
- g2_dma->channel[chan_nr].root_addr,
- g2_dma->channel[chan_nr].g2_addr,
- g2_dma->channel[chan_nr].direction,
- g2_dma->channel[chan_nr].ctrl,
- g2_dma->channel[chan_nr].chan_enable,
- g2_dma->channel[chan_nr].xfer_enable);
-
- return 0;
-}
-
-static int g2_get_residue(struct dma_channel *chan)
-{
- return g2_bytes_remaining(chan->chan);
-}
-
-static struct dma_ops g2_dma_ops = {
- .xfer = g2_xfer_dma,
- .get_residue = g2_get_residue,
-};
-
-static struct dma_info g2_dma_info = {
- .name = "g2_dmac",
- .nr_channels = 4,
- .ops = &g2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init g2_dma_init(void)
-{
- int ret;
-
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
- "g2 DMA handler", &g2_dma_info);
- if (unlikely(ret))
- return -EINVAL;
-
- /* Magic */
- g2_dma->wait_state = 27;
- g2_dma->magic = 0x4659404f;
-
- ret = register_dmac(&g2_dma_info);
- if (unlikely(ret != 0))
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
-
- return ret;
-}
-
-static void __exit g2_dma_exit(void)
-{
- free_irq(HW_EVENT_G2_DMA, &g2_dma_info);
- unregister_dmac(&g2_dma_info);
-}
-
-subsys_initcall(g2_dma_init);
-module_exit(g2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("G2 bus DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
deleted file mode 100644
index 21c347543e193d..00000000000000
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-pvr2.c
- *
- * NEC PowerVR 2 (Dreamcast) DMA support
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <mach/sysasic.h>
-#include <mach/dma.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-static unsigned int xfer_complete;
-static int count;
-
-static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
-{
- if (get_dma_residue(PVR2_CASCADE_CHAN)) {
- printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
- "on channel %d, waiting..\n", PVR2_CASCADE_CHAN);
- dma_wait_for_completion(PVR2_CASCADE_CHAN);
- }
-
- if (count++ < 10)
- pr_debug("Got a pvr2 dma interrupt for channel %d\n",
- irq - HW_EVENT_PVR2_DMA);
-
- xfer_complete = 1;
-
- return IRQ_HANDLED;
-}
-
-static int pvr2_request_dma(struct dma_channel *chan)
-{
- if (__raw_readl(PVR2_DMA_MODE) != 0)
- return -EBUSY;
-
- __raw_writel(0, PVR2_DMA_LMMODE0);
-
- return 0;
-}
-
-static int pvr2_get_dma_residue(struct dma_channel *chan)
-{
- return xfer_complete == 0;
-}
-
-static int pvr2_xfer_dma(struct dma_channel *chan)
-{
- if (chan->sar || !chan->dar)
- return -EINVAL;
-
- xfer_complete = 0;
-
- __raw_writel(chan->dar, PVR2_DMA_ADDR);
- __raw_writel(chan->count, PVR2_DMA_COUNT);
- __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
-
- return 0;
-}
-
-static struct dma_ops pvr2_dma_ops = {
- .request = pvr2_request_dma,
- .get_residue = pvr2_get_dma_residue,
- .xfer = pvr2_xfer_dma,
-};
-
-static struct dma_info pvr2_dma_info = {
- .name = "pvr2_dmac",
- .nr_channels = 1,
- .ops = &pvr2_dma_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init pvr2_dma_init(void)
-{
- if (request_irq(HW_EVENT_PVR2_DMA, pvr2_dma_interrupt, 0,
- "pvr2 DMA handler", NULL))
- pr_err("Failed to register pvr2 DMA handler interrupt\n");
- request_dma(PVR2_CASCADE_CHAN, "pvr2 cascade");
-
- return register_dmac(&pvr2_dma_info);
-}
-
-static void __exit pvr2_dma_exit(void)
-{
- free_dma(PVR2_CASCADE_CHAN);
- free_irq(HW_EVENT_PVR2_DMA, 0);
- unregister_dmac(&pvr2_dma_info);
-}
-
-subsys_initcall(pvr2_dma_init);
-module_exit(pvr2_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
deleted file mode 100644
index 96c626c2cd0a49..00000000000000
--- a/arch/sh/drivers/dma/dma-sh.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sh.c
- *
- * SuperH On-chip DMAC Support
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach-dreamcast/mach/dma.h>
-#include <asm/dma.h>
-#include <asm/dma-register.h>
-#include <cpu/dma-register.h>
-#include <cpu/dma.h>
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
-
-static unsigned long dma_find_base(unsigned int chan)
-{
- unsigned long base = SH_DMAC_BASE0;
-
-#ifdef SH_DMAC_BASE1
- if (chan >= 6)
- base = SH_DMAC_BASE1;
-#endif
-
- return base;
-}
-
-static unsigned long dma_base_addr(unsigned int chan)
-{
- unsigned long base = dma_find_base(chan);
-
- /* Normalize offset calculation */
- if (chan >= 9)
- chan -= 6;
- if (chan >= 4)
- base += 0x10;
-
- return base + (chan * 0x10);
-}
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return chan >= 6 ? DMTE6_IRQ : DMTE0_IRQ;
-}
-#else
-
-static unsigned int dmte_irq_map[] = {
- DMTE0_IRQ, DMTE0_IRQ + 1, DMTE0_IRQ + 2, DMTE0_IRQ + 3,
-
-#ifdef DMTE4_IRQ
- DMTE4_IRQ, DMTE4_IRQ + 1,
-#endif
-
-#ifdef DMTE6_IRQ
- DMTE6_IRQ, DMTE6_IRQ + 1,
-#endif
-
-#ifdef DMTE8_IRQ
- DMTE8_IRQ, DMTE9_IRQ, DMTE10_IRQ, DMTE11_IRQ,
-#endif
-};
-
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- return dmte_irq_map[chan];
-}
-#endif
-
-/*
- * We determine the correct shift size based off of the CHCR transmit size
- * for the given channel. Since we know that it will take:
- *
- * info->count >> ts_shift[transmit_size]
- *
- * iterations to complete the transfer.
- */
-static unsigned int ts_shift[] = TS_SHIFT;
-
-static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
-{
- u32 chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
- ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
-
- return ts_shift[cnt];
-}
-
-/*
- * The transfer end interrupt must read the chcr register to end the
- * hardware interrupt active condition.
- * Besides that it needs to waken any waiting process, which should handle
- * setting up the next transfer.
- */
-static irqreturn_t dma_tei(int irq, void *dev_id)
-{
- struct dma_channel *chan = dev_id;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
-
- if (!(chcr & CHCR_TE))
- return IRQ_NONE;
-
- chcr &= ~(CHCR_IE | CHCR_DE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- wake_up(&chan->wait_queue);
-
- return IRQ_HANDLED;
-}
-
-static int sh_dmac_request_dma(struct dma_channel *chan)
-{
- if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
- return 0;
-
- return request_irq(get_dmte_irq(chan->chan), dma_tei, IRQF_SHARED,
- chan->dev_id, chan);
-}
-
-static void sh_dmac_free_dma(struct dma_channel *chan)
-{
- free_irq(get_dmte_irq(chan->chan), chan);
-}
-
-static int
-sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
-{
- if (!chcr)
- chcr = RS_DUAL | CHCR_IE;
-
- if (chcr & CHCR_IE) {
- chcr &= ~CHCR_IE;
- chan->flags |= DMA_TEI_CAPABLE;
- } else {
- chan->flags &= ~DMA_TEI_CAPABLE;
- }
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- chan->flags |= DMA_CONFIGURED;
- return 0;
-}
-
-static void sh_dmac_enable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr |= CHCR_DE;
-
- if (chan->flags & DMA_TEI_CAPABLE)
- chcr |= CHCR_IE;
-
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- enable_irq(irq);
- }
-}
-
-static void sh_dmac_disable_dma(struct dma_channel *chan)
-{
- int irq;
- u32 chcr;
-
- if (chan->flags & DMA_TEI_CAPABLE) {
- irq = get_dmte_irq(chan->chan);
- disable_irq(irq);
- }
-
- chcr = __raw_readl(dma_base_addr(chan->chan) + CHCR);
- chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- __raw_writel(chcr, (dma_base_addr(chan->chan) + CHCR));
-}
-
-static int sh_dmac_xfer_dma(struct dma_channel *chan)
-{
- /*
- * If we haven't pre-configured the channel with special flags, use
- * the defaults.
- */
- if (unlikely(!(chan->flags & DMA_CONFIGURED)))
- sh_dmac_configure_channel(chan, 0);
-
- sh_dmac_disable_dma(chan);
-
- /*
- * Single-address mode usage note!
- *
- * It's important that we don't accidentally write any value to SAR/DAR
- * (this includes 0) that hasn't been directly specified by the user if
- * we're in single-address mode.
- *
- * In this case, only one address can be defined, anything else will
- * result in a DMA address error interrupt (at least on the SH-4),
- * which will subsequently halt the transfer.
- *
- * Channel 2 on the Dreamcast is a special case, as this is used for
- * cascading to the PVR2 DMAC. In this case, we still need to write
- * SAR and DAR, regardless of value, in order for cascading to work.
- */
- if (chan->sar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->sar, (dma_base_addr(chan->chan) + SAR));
- if (chan->dar || (mach_is_dreamcast() &&
- chan->chan == PVR2_CASCADE_CHAN))
- __raw_writel(chan->dar, (dma_base_addr(chan->chan) + DAR));
-
- __raw_writel(chan->count >> calc_xmit_shift(chan),
- (dma_base_addr(chan->chan) + TCR));
-
- sh_dmac_enable_dma(chan);
-
- return 0;
-}
-
-static int sh_dmac_get_dma_residue(struct dma_channel *chan)
-{
- if (!(__raw_readl(dma_base_addr(chan->chan) + CHCR) & CHCR_DE))
- return 0;
-
- return __raw_readl(dma_base_addr(chan->chan) + TCR)
- << calc_xmit_shift(chan);
-}
-
-/*
- * DMAOR handling
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define NR_DMAOR 2
-#else
-#define NR_DMAOR 1
-#endif
-
-/*
- * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
- * channels 0 - 5, DMAOR1 6 - 11 (optional).
- */
-#define dmaor_read_reg(n) __raw_readw(dma_find_base((n)*6))
-#define dmaor_write_reg(n, data) __raw_writew(data, dma_find_base(n)*6)
-
-static inline int dmaor_reset(int no)
-{
- unsigned long dmaor = dmaor_read_reg(no);
-
- /* Try to clear the error flags first, incase they are set */
- dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
- dmaor_write_reg(no, dmaor);
-
- dmaor |= DMAOR_INIT;
- dmaor_write_reg(no, dmaor);
-
- /* See if we got an error again */
- if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
- printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * DMAE handling
- */
-#ifdef CONFIG_CPU_SH4
-
-#if defined(DMAE1_IRQ)
-#define NR_DMAE 2
-#else
-#define NR_DMAE 1
-#endif
-
-static const char *dmae_name[] = {
- "DMAC Address Error0",
- "DMAC Address Error1"
-};
-
-#ifdef CONFIG_SH_DMA_IRQ_MULTI
-static inline unsigned int get_dma_error_irq(int n)
-{
- return get_dmte_irq(n * 6);
-}
-#else
-
-static unsigned int dmae_irq_map[] = {
- DMAE0_IRQ,
-
-#ifdef DMAE1_IRQ
- DMAE1_IRQ,
-#endif
-};
-
-static inline unsigned int get_dma_error_irq(int n)
-{
- return dmae_irq_map[n];
-}
-#endif
-
-static irqreturn_t dma_err(int irq, void *dummy)
-{
- int i;
-
- for (i = 0; i < NR_DMAOR; i++)
- dmaor_reset(i);
-
- disable_irq(irq);
-
- return IRQ_HANDLED;
-}
-
-static int dmae_irq_init(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++) {
- int i = request_irq(get_dma_error_irq(n), dma_err,
- IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]);
- if (unlikely(i < 0)) {
- printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
- return i;
- }
- }
-
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
- int n;
-
- for (n = 0; n < NR_DMAE; n++)
- free_irq(get_dma_error_irq(n), NULL);
-}
-#else
-static inline int dmae_irq_init(void)
-{
- return 0;
-}
-
-static void dmae_irq_free(void)
-{
-}
-#endif
-
-static struct dma_ops sh_dmac_ops = {
- .request = sh_dmac_request_dma,
- .free = sh_dmac_free_dma,
- .get_residue = sh_dmac_get_dma_residue,
- .xfer = sh_dmac_xfer_dma,
- .configure = sh_dmac_configure_channel,
-};
-
-static struct dma_info sh_dmac_info = {
- .name = "sh_dmac",
- .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
- .ops = &sh_dmac_ops,
- .flags = DMAC_CHANNELS_TEI_CAPABLE,
-};
-
-static int __init sh_dmac_init(void)
-{
- struct dma_info *info = &sh_dmac_info;
- int i, rc;
-
- /*
- * Initialize DMAE, for parts that support it.
- */
- rc = dmae_irq_init();
- if (unlikely(rc != 0))
- return rc;
-
- /*
- * Initialize DMAOR, and clean up any error flags that may have
- * been set.
- */
- for (i = 0; i < NR_DMAOR; i++) {
- rc = dmaor_reset(i);
- if (unlikely(rc != 0))
- return rc;
- }
-
- return register_dmac(info);
-}
-
-static void __exit sh_dmac_exit(void)
-{
- dmae_irq_free();
- unregister_dmac(&sh_dmac_info);
-}
-
-subsys_initcall(sh_dmac_init);
-module_exit(sh_dmac_exit);
-
-MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
-MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
deleted file mode 100644
index 8ef318150f84db..00000000000000
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/dma/dma-sysfs.c
- *
- * sysfs interface for SH DMA API
- *
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <asm/dma.h>
-
-static struct bus_type dma_subsys = {
- .name = "dma",
- .dev_name = "dma",
-};
-
-static ssize_t dma_show_devices(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- ssize_t len = 0;
- int i;
-
- for (i = 0; i < 16; i++) {
- struct dma_info *info = get_dma_info(i);
- struct dma_channel *channel = get_dma_channel(i);
-
- if (unlikely(!info) || !channel)
- continue;
-
- len += sprintf(buf + len, "%2d: %14s %s\n",
- channel->chan, info->name,
- channel->dev_id);
- }
-
- return len;
-}
-
-static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
-
-static int __init dma_subsys_init(void)
-{
- int ret;
-
- ret = subsys_system_register(&dma_subsys, NULL);
- if (unlikely(ret))
- return ret;
-
- return device_create_file(dma_subsys.dev_root, &dev_attr_devices);
-}
-postcore_initcall(dma_subsys_init);
-
-static ssize_t dma_show_dev_id(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "%s\n", channel->dev_id);
-}
-
-static ssize_t dma_store_dev_id(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- strcpy(channel->dev_id, buf);
- return count;
-}
-
-static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
-
-static ssize_t dma_store_config(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- unsigned long config;
-
- config = simple_strtoul(buf, NULL, 0);
- dma_configure_channel(channel->vchan, config);
-
- return count;
-}
-
-static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
-
-static ssize_t dma_show_mode(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- return sprintf(buf, "0x%08x\n", channel->mode);
-}
-
-static ssize_t dma_store_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct dma_channel *channel = to_dma_channel(dev);
- channel->mode = simple_strtoul(buf, NULL, 0);
- return count;
-}
-
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
-
-#define dma_ro_attr(field, fmt) \
-static ssize_t dma_show_##field(struct device *dev, \
- struct device_attribute *attr, char *buf)\
-{ \
- struct dma_channel *channel = to_dma_channel(dev); \
- return sprintf(buf, fmt, channel->field); \
-} \
-static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
-
-dma_ro_attr(count, "0x%08x\n");
-dma_ro_attr(flags, "0x%08lx\n");
-
-int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
- int ret;
-
- dev->id = chan->vchan;
- dev->bus = &dma_subsys;
-
- ret = device_register(dev);
- if (ret)
- return ret;
-
- ret |= device_create_file(dev, &dev_attr_dev_id);
- ret |= device_create_file(dev, &dev_attr_count);
- ret |= device_create_file(dev, &dev_attr_mode);
- ret |= device_create_file(dev, &dev_attr_flags);
- ret |= device_create_file(dev, &dev_attr_config);
-
- if (unlikely(ret)) {
- dev_err(&info->pdev->dev, "Failed creating attrs\n");
- return ret;
- }
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
-}
-
-void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
-{
- struct device *dev = &chan->dev;
- char name[16];
-
- device_remove_file(dev, &dev_attr_dev_id);
- device_remove_file(dev, &dev_attr_count);
- device_remove_file(dev, &dev_attr_mode);
- device_remove_file(dev, &dev_attr_flags);
- device_remove_file(dev, &dev_attr_config);
-
- snprintf(name, sizeof(name), "dma%d", chan->chan);
- sysfs_remove_link(&info->pdev->dev.kobj, name);
-
- device_unregister(dev);
-}
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
deleted file mode 100644
index 5b2c1fd254d729..00000000000000
--- a/arch/sh/drivers/dma/dmabrg.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 DMABRG IRQ handling
- *
- * (c) 2007 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <asm/dma.h>
-#include <asm/dmabrg.h>
-#include <asm/io.h>
-
-/*
- * The DMABRG is a special DMA unit within the SH7760. It does transfers
- * from USB-SRAM/Audio units to main memory (and also the LCDC; but that
- * part is sensibly placed in the LCDC registers and requires no irqs)
- * It has 3 IRQ lines which trigger 10 events, and works independently
- * from the traditional SH DMAC (although it blocks usage of DMAC 0)
- *
- * BRGIRQID | component | dir | meaning | source
- * -----------------------------------------------------
- * 0 | USB-DMA | ... | xfer done | DMABRGI1
- * 1 | USB-UAE | ... | USB addr err.| DMABRGI0
- * 2 | HAC0/SSI0 | play| all done | DMABRGI1
- * 3 | HAC0/SSI0 | play| half done | DMABRGI2
- * 4 | HAC0/SSI0 | rec | all done | DMABRGI1
- * 5 | HAC0/SSI0 | rec | half done | DMABRGI2
- * 6 | HAC1/SSI1 | play| all done | DMABRGI1
- * 7 | HAC1/SSI1 | play| half done | DMABRGI2
- * 8 | HAC1/SSI1 | rec | all done | DMABRGI1
- * 9 | HAC1/SSI1 | rec | half done | DMABRGI2
- *
- * all can be enabled/disabled in the DMABRGCR register,
- * as well as checked if they occurred.
- *
- * DMABRGI0 services USB DMA Address errors, but it still must be
- * enabled/acked in the DMABRGCR register. USB-DMA complete indicator
- * is grouped together with the audio buffer end indicators, too bad...
- *
- * DMABRGCR: Bits 31-24: audio-dma ENABLE flags,
- * Bits 23-16: audio-dma STATUS flags,
- * Bits 9-8: USB error/xfer ENABLE,
- * Bits 1-0: USB error/xfer STATUS.
- * Ack an IRQ by writing 0 to the STATUS flag.
- * Mask IRQ by writing 0 to ENABLE flag.
- *
- * Usage is almost like with any other IRQ:
- * dmabrg_request_irq(BRGIRQID, handler, data)
- * dmabrg_free_irq(BRGIRQID)
- *
- * handler prototype: void brgirqhandler(void *data)
- */
-
-#define DMARSRA 0xfe090000
-#define DMAOR 0xffa00040
-#define DMACHCR0 0xffa0000c
-#define DMABRGCR 0xfe3c0000
-
-#define DMAOR_BRG 0x0000c000
-#define DMAOR_DMEN 0x00000001
-
-#define DMABRGI0 68
-#define DMABRGI1 69
-#define DMABRGI2 70
-
-struct dmabrg_handler {
- void (*handler)(void *);
- void *data;
-} *dmabrg_handlers;
-
-static inline void dmabrg_call_handler(int i)
-{
- dmabrg_handlers[i].handler(dmabrg_handlers[i].data);
-}
-
-/*
- * main DMABRG irq handler. It acks irqs and then
- * handles every set and unmasked bit sequentially.
- * No locking and no validity checks; it should be
- * as fast as possible (audio!)
- */
-static irqreturn_t dmabrg_irq(int irq, void *data)
-{
- unsigned long dcr;
- unsigned int i;
-
- dcr = __raw_readl(DMABRGCR);
- __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
- dcr &= dcr >> 8; /* ignore masked */
-
- /* USB stuff, get it out of the way first */
- if (dcr & 1)
- dmabrg_call_handler(DMABRGIRQ_USBDMA);
- if (dcr & 2)
- dmabrg_call_handler(DMABRGIRQ_USBDMAERR);
-
- /* Audio */
- dcr >>= 16;
- while (dcr) {
- i = __ffs(dcr);
- dcr &= dcr - 1;
- dmabrg_call_handler(i + DMABRGIRQ_A0TXF);
- }
- return IRQ_HANDLED;
-}
-
-static void dmabrg_disable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-static void dmabrg_enable_irq(unsigned int dmairq)
-{
- unsigned long dcr;
- dcr = __raw_readl(DMABRGCR);
- dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
- __raw_writel(dcr, DMABRGCR);
-}
-
-int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
- void *data)
-{
- if ((dmairq > 9) || !handler)
- return -ENOENT;
- if (dmabrg_handlers[dmairq].handler)
- return -EBUSY;
-
- dmabrg_handlers[dmairq].handler = handler;
- dmabrg_handlers[dmairq].data = data;
-
- dmabrg_enable_irq(dmairq);
- return 0;
-}
-EXPORT_SYMBOL_GPL(dmabrg_request_irq);
-
-void dmabrg_free_irq(unsigned int dmairq)
-{
- if (likely(dmairq < 10)) {
- dmabrg_disable_irq(dmairq);
- dmabrg_handlers[dmairq].handler = NULL;
- dmabrg_handlers[dmairq].data = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(dmabrg_free_irq);
-
-static int __init dmabrg_init(void)
-{
- unsigned long or;
- int ret;
-
- dmabrg_handlers = kcalloc(10, sizeof(struct dmabrg_handler),
- GFP_KERNEL);
- if (!dmabrg_handlers)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_DMA
- /* request DMAC channel 0 before anyone else can get it */
- ret = request_dma(0, "DMAC 0 (DMABRG)");
- if (ret < 0)
- printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
-#endif
-
- __raw_writel(0, DMABRGCR);
- __raw_writel(0, DMACHCR0);
- __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
-
- /* enable DMABRG mode, enable the DMAC */
- or = __raw_readl(DMAOR);
- __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
-
- ret = request_irq(DMABRGI0, dmabrg_irq, 0,
- "DMABRG USB address error", NULL);
- if (ret)
- goto out0;
-
- ret = request_irq(DMABRGI1, dmabrg_irq, 0,
- "DMABRG Transfer End", NULL);
- if (ret)
- goto out1;
-
- ret = request_irq(DMABRGI2, dmabrg_irq, 0,
- "DMABRG Transfer Half", NULL);
- if (ret == 0)
- return ret;
-
- free_irq(DMABRGI1, NULL);
-out1: free_irq(DMABRGI0, NULL);
-out0: kfree(dmabrg_handlers);
- return ret;
-}
-subsys_initcall(dmabrg_init);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
deleted file mode 100644
index 24391b444b286d..00000000000000
--- a/arch/sh/drivers/heartbeat.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic heartbeat driver for regular LED banks
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- *
- * Most SH reference boards include a number of individual LEDs that can
- * be independently controlled (either via a pre-defined hardware
- * function or via the LED class, if desired -- the hardware tends to
- * encapsulate some of the same "triggers" that the LED class supports,
- * so there's not too much value in it).
- *
- * Additionally, most of these boards also have a LED bank that we've
- * traditionally used for strobing the load average. This use case is
- * handled by this driver, rather than giving each LED bit position its
- * own struct device.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/sched/loadavg.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <asm/heartbeat.h>
-
-#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.2"
-
-static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-
-static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
- unsigned bit, unsigned int inverted)
-{
- unsigned int new;
-
- new = (1 << hd->bit_pos[bit]);
- if (inverted)
- new = ~new;
-
- new &= hd->mask;
-
- switch (hd->regsize) {
- case 32:
- new |= ioread32(hd->base) & ~hd->mask;
- iowrite32(new, hd->base);
- break;
- case 16:
- new |= ioread16(hd->base) & ~hd->mask;
- iowrite16(new, hd->base);
- break;
- default:
- new |= ioread8(hd->base) & ~hd->mask;
- iowrite8(new, hd->base);
- break;
- }
-}
-
-static void heartbeat_timer(struct timer_list *t)
-{
- struct heartbeat_data *hd = from_timer(hd, t, timer);
- static unsigned bit = 0, up = 1;
-
- heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED);
-
- bit += up;
- if ((bit == 0) || (bit == (hd->nr_bits)-1))
- up = -up;
-
- mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
- ((avenrun[0] / 5) + (3 << FSHIFT)))));
-}
-
-static int heartbeat_drv_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct heartbeat_data *hd;
- int i;
-
- if (unlikely(pdev->num_resources != 1)) {
- dev_err(&pdev->dev, "invalid number of resources\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- if (pdev->dev.platform_data) {
- hd = pdev->dev.platform_data;
- } else {
- hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
- if (unlikely(!hd))
- return -ENOMEM;
- }
-
- hd->base = ioremap(res->start, resource_size(res));
- if (unlikely(!hd->base)) {
- dev_err(&pdev->dev, "ioremap failed\n");
-
- if (!pdev->dev.platform_data)
- kfree(hd);
-
- return -ENXIO;
- }
-
- if (!hd->nr_bits) {
- hd->bit_pos = default_bit_pos;
- hd->nr_bits = ARRAY_SIZE(default_bit_pos);
- }
-
- hd->mask = 0;
- for (i = 0; i < hd->nr_bits; i++)
- hd->mask |= (1 << hd->bit_pos[i]);
-
- if (!hd->regsize) {
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_32BIT:
- hd->regsize = 32;
- break;
- case IORESOURCE_MEM_16BIT:
- hd->regsize = 16;
- break;
- case IORESOURCE_MEM_8BIT:
- default:
- hd->regsize = 8;
- break;
- }
- }
-
- timer_setup(&hd->timer, heartbeat_timer, 0);
- platform_set_drvdata(pdev, hd);
-
- return mod_timer(&hd->timer, jiffies + 1);
-}
-
-static struct platform_driver heartbeat_driver = {
- .probe = heartbeat_drv_probe,
- .driver = {
- .name = DRV_NAME,
- .suppress_bind_attrs = true,
- },
-};
-
-static int __init heartbeat_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&heartbeat_driver);
-}
-device_initcall(heartbeat_init);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
deleted file mode 100644
index d313fd3ce7091e..00000000000000
--- a/arch/sh/drivers/pci/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the PCI specific kernel interface routines under Linux.
-#
-obj-y += common.o pci.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
-
-obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
- pci-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
-obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
-obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03) += fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7786) += fixups-sdk7786.o
-obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN) += fixups-titan.o
-obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
deleted file mode 100644
index 2fd2b77e12cec1..00000000000000
--- a/arch/sh/drivers/pci/common.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
- int top_bus, int busnr, int devfn)
-{
- static struct pci_dev dev;
- static struct pci_bus bus;
-
- dev.bus = &bus;
- dev.sysdata = hose;
- dev.devfn = devfn;
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose->pci_ops;
-
- if(busnr != top_bus)
- /* Fake a parent bus structure. */
- bus.parent = &bus;
- else
- bus.parent = NULL;
-
- return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int __init early_##rw##_config_##size(struct pci_channel *hose, \
- int top_bus, int bus, int devfn, int offset, type value) \
-{ \
- return pci_##rw##_config_##size( \
- fake_pci_dev(hose, top_bus, bus, devfn), \
- offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-int __init pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus)
-{
- u32 pci_devfn;
- unsigned short vid;
- int cap66 = -1;
- u16 stat;
-
- pr_info("PCI: Checking 66MHz capabilities...\n");
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- if (early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_VENDOR_ID, &vid) !=
- PCIBIOS_SUCCESSFUL)
- continue;
- if (vid == 0xffff)
- continue;
-
- /* check 66MHz capability */
- if (cap66 < 0)
- cap66 = 1;
- if (cap66) {
- early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &stat);
- if (!(stat & PCI_STATUS_66MHZ)) {
- printk(KERN_DEBUG
- "PCI: %02x:%02x not 66MHz capable.\n",
- current_bus, pci_devfn);
- cap66 = 0;
- break;
- }
- }
- }
-
- return cap66 > 0;
-}
-
-static void pcibios_enable_err(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, err_timer);
-
- del_timer(&hose->err_timer);
- printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
- enable_irq(hose->err_irq);
-}
-
-static void pcibios_enable_serr(struct timer_list *t)
-{
- struct pci_channel *hose = from_timer(hose, t, serr_timer);
-
- del_timer(&hose->serr_timer);
- printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
- enable_irq(hose->serr_irq);
-}
-
-void pcibios_enable_timers(struct pci_channel *hose)
-{
- if (hose->err_irq) {
- timer_setup(&hose->err_timer, pcibios_enable_err, 0);
- }
-
- if (hose->serr_irq) {
- timer_setup(&hose->serr_timer, pcibios_enable_serr, 0);
- }
-}
-
-/*
- * A simple handler for the regular PCI status errors, called from IRQ
- * context.
- */
-unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status,
- struct pci_channel *hose)
-{
- unsigned int cmd = 0;
-
- if (status & PCI_STATUS_REC_MASTER_ABORT) {
- printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
- cmd |= PCI_STATUS_REC_MASTER_ABORT;
- }
-
- if (status & PCI_STATUS_REC_TARGET_ABORT) {
- printk(KERN_DEBUG "PCI: target abort: ");
- pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_REC_TARGET_ABORT;
- }
-
- if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
- printk(KERN_DEBUG "PCI: parity error detected: ");
- pcibios_report_status(PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY, 1);
- pr_cont("\n");
-
- cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
-
- /* Now back off of the IRQ for awhile */
- if (hose->err_irq) {
- disable_irq_nosync(hose->err_irq);
- hose->err_timer.expires = jiffies + HZ;
- add_timer(&hose->err_timer);
- }
- }
-
- return cmd;
-}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
deleted file mode 100644
index 41e4daee8f043f..00000000000000
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-dreamcast.c
- *
- * PCI fixups for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003, 2006 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/dma-map-ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static void gapspci_fixup_resources(struct pci_dev *dev)
-{
- struct pci_channel *p = dev->sysdata;
- struct resource res;
- struct pci_bus_region region;
-
- printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
-
- switch (dev->device) {
- case PCI_DEVICE_ID_SEGA_BBA:
- /*
- * We also assume that dev->devfn == 0
- */
- dev->resource[1].start = p->resources[0].start + 0x100;
- dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
-
- /*
- * This is not a normal BAR, prevent any attempts to move
- * the BAR, as this will result in a bus lock.
- */
- dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
-
- /*
- * Redirect dma memory allocations to special memory window.
- *
- * If this GAPSPCI region were mapped by a BAR, the CPU
- * phys_addr_t would be pci_resource_start(), and the bus
- * address would be pci_bus_address(pci_resource_start()).
- * But apparently there's no BAR mapping it, so we just
- * "know" its CPU address is GAPSPCI_DMA_BASE.
- */
- res.start = GAPSPCI_DMA_BASE;
- res.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1;
- res.flags = IORESOURCE_MEM;
- pcibios_resource_to_bus(dev->bus, ®ion, &res);
- BUG_ON(dma_declare_coherent_memory(&dev->dev,
- res.start,
- region.start,
- resource_size(&res)));
- break;
- default:
- printk("PCI: Failed resource fixup\n");
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The interrupt routing semantics here are quite trivial.
- *
- * We basically only support one interrupt, so we only bother
- * updating a device's interrupt line with this single shared
- * interrupt. Keeps routing quite simple, doesn't it?
- */
- return GAPSPCI_IRQ;
-}
diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
deleted file mode 100644
index 53fa2fc87eec28..00000000000000
--- a/arch/sh/drivers/pci/fixups-landisk.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-landisk.c
- *
- * PCI initialization for the I-O DATA Device, Inc. LANDISK board
- *
- * Copyright (C) 2006 kogiidena
- * Copyright (C) 2010 Nobuhiro Iwamatsu
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- /*
- * slot0: pin1-4 = irq5,6,7,8
- * slot1: pin1-4 = irq6,7,8,5
- * slot2: pin1-4 = irq7,8,5,6
- * slot3: pin1-4 = irq8,5,6,7
- */
- int irq = ((slot + pin - 1) & 0x3) + evt2irq(0x2a0);
-
- if ((slot | (pin - 1)) > 0x3) {
- printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n",
- slot, pin - 1 + 'A');
- return -1;
- }
- return irq;
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
deleted file mode 100644
index 3c9139c5955e6d..00000000000000
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-r7780rp.c
- *
- * Highlander R7780RP-1 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xa20) + slot;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
deleted file mode 100644
index 3f0a6fe1610b61..00000000000000
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-rts7751r2d.c
- *
- * RTS7751R2D / LBOXRE2 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <mach/lboxre2.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-#include <generated/machtypes.h>
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-static u8 rts7751r2d_irq_tab[] = {
- IRQ_PCI_INTA,
- IRQ_PCI_INTB,
- IRQ_PCI_INTC,
- IRQ_PCI_INTD,
-};
-
-static char lboxre2_irq_tab[] = {
- IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- if (mach_is_lboxre2())
- return lboxre2_irq_tab[slot];
- else
- return rts7751r2d_irq_tab[slot];
-}
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = __raw_readl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(chan, bcr1, SH4_PCIBCR1);
-
- /* Enable all interrupts, so we known what to fix */
- pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
- pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
-
- mcr = __raw_readl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(chan, mcr, SH4_PCIMCR);
-
- pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
- pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
- pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
- pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
deleted file mode 100644
index c306040485bd23..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/fixups-sdk7780.c
- *
- * PCI fixups for the SDK7780SE03
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-#define IRQ_INTA evt2irq(0xa20)
-#define IRQ_INTB evt2irq(0xa40)
-#define IRQ_INTC evt2irq(0xa60)
-#define IRQ_INTD evt2irq(0xa80)
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] = {
- /* INTA */
- { IRQ_INTA, IRQ_INTD, IRQ_INTC, IRQ_INTD, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { IRQ_INTB, IRQ_INTA, -1, IRQ_INTA, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTC */
- { IRQ_INTC, IRQ_INTB, -1, IRQ_INTB, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1 },
- /* INTD */
- { IRQ_INTD, IRQ_INTC, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1 },
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return sdk7780_irq_tab[pin-1][slot];
-}
diff --git a/arch/sh/drivers/pci/fixups-sdk7786.c b/arch/sh/drivers/pci/fixups-sdk7786.c
deleted file mode 100644
index 6972af7b4e93d5..00000000000000
--- a/arch/sh/drivers/pci/fixups-sdk7786.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDK7786 FPGA PCIe mux handling
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <mach/fpga.h>
-
-/*
- * The SDK7786 FPGA supports mangling of most of the slots in some way or
- * another. Slots 3/4 are special in that only one can be supported at a
- * time, and both appear on port 3 to the PCI bus scan. Enabling slot 4
- * (the horizontal edge connector) will disable slot 3 entirely.
- *
- * Misconfigurations can be detected through the FPGA via the slot
- * resistors to determine card presence. Hotplug remains unsupported.
- */
-static unsigned int slot4en __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (strcmp(str, "slot4en") == 0) {
- slot4en = 1;
- return NULL;
- }
-
- return str;
-}
-
-static int __init sdk7786_pci_init(void)
-{
- u16 data = fpga_read_reg(PCIECR);
-
- /*
- * Enable slot #4 if it's been specified on the command line.
- *
- * Optionally reroute if slot #4 has a card present while slot #3
- * does not, regardless of command line value.
- *
- * Card presence is logically inverted.
- */
- slot4en ?: (!(data & PCIECR_PRST4) && (data & PCIECR_PRST3));
- if (slot4en) {
- pr_info("Activating PCIe slot#4 (disabling slot#3)\n");
-
- data &= ~PCIECR_PCIEMUX1;
- fpga_write_reg(data, PCIECR);
-
- /* Warn about forced rerouting if slot#3 is occupied */
- if ((data & PCIECR_PRST3) == 0) {
- pr_warn("Unreachable card detected in slot#3\n");
- return -EBUSY;
- }
- } else
- pr_info("PCIe slot#4 disabled\n");
-
- return 0;
-}
-postcore_initcall(sdk7786_pci_init);
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
deleted file mode 100644
index 608f6521ceffcd..00000000000000
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *, u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return evt2irq(0x3a0);
- case 1: return evt2irq(0x3a0); /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int pci_fixup_pcic(struct pci_channel *chan)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
deleted file mode 100644
index 7ec4a74ab12c45..00000000000000
--- a/arch/sh/drivers/pci/fixups-sh03.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (dev->bus->number == 0) {
- switch (slot) {
- case 4: return evt2irq(0x2a0); /* eth0 */
- case 8: return evt2irq(0x2a0); /* eth1 */
- case 6: return evt2irq(0x240); /* PCI bridge */
- default:
- printk(KERN_ERR "PCI: Bad IRQ mapping request "
- "for slot %d\n", slot);
- return evt2irq(0x240);
- }
- } else {
- switch (pin) {
- case 0: irq = evt2irq(0x240); break;
- case 1: irq = evt2irq(0x240); break;
- case 2: irq = evt2irq(0x240); break;
- case 3: irq = evt2irq(0x240); break;
- case 4: irq = evt2irq(0x240); break;
- default: irq = -1; break;
- }
- }
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
deleted file mode 100644
index 317225c094137f..00000000000000
--- a/arch/sh/drivers/pci/fixups-snapgear.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author: David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/sh_intc.h>
-#include "pci-sh4.h"
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (slot) {
- case 8: /* the PCI bridge */ break;
- case 11: irq = evt2irq(0x300); break; /* USB */
- case 12: irq = evt2irq(0x360); break; /* PCMCIA */
- case 13: irq = evt2irq(0x2a0); break; /* eth0 */
- case 14: irq = evt2irq(0x300); break; /* eth1 */
- case 15: irq = evt2irq(0x360); break; /* safenet (unused) */
- }
-
- printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c
deleted file mode 100644
index b5bb65caa16d6f..00000000000000
--- a/arch/sh/drivers/pci/fixups-titan.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/pci/ops-titan.c
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Modified from ops-snapgear.c written by David McCullough
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * PCI initialization for the Titan boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/titan.h>
-#include "pci-sh4.h"
-
-static char titan_irq_tab[] = {
- TITAN_IRQ_WAN,
- TITAN_IRQ_LAN,
- TITAN_IRQ_MPCIA,
- TITAN_IRQ_MPCIB,
- TITAN_IRQ_USB,
-};
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = titan_irq_tab[slot];
-
- printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
deleted file mode 100644
index 517a8a9702f662..00000000000000
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI operations for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/pci.h>
-
-/*
- * The !gapspci_config_access case really shouldn't happen, ever, unless
- * someone implicitly messes around with the last devfn value.. otherwise we
- * only support a single device anyways, and if we didn't have a BBA, we
- * wouldn't make it terribly far through the PCI setup anyways.
- *
- * Also, we could very easily support both Type 0 and Type 1 configurations
- * here, but since it doesn't seem that there is any such implementation in
- * existence, we don't bother.
- *
- * I suppose if someone actually gets around to ripping the chip out of
- * the BBA and hanging some more devices off of it, then this might be
- * something to take into consideration. However, due to the cost of the BBA,
- * and the general lack of activity by DC hardware hackers, this doesn't seem
- * likely to happen anytime soon.
- */
-static int gapspci_config_access(unsigned char bus, unsigned int devfn)
-{
- return (bus == 0) && (devfn == 0);
-}
-
-/*
- * We can also actually read and write in b/w/l sizes! Thankfully this part
- * was at least done right, and we don't have to do the stupid masking and
- * shifting that we do on the 7751! Small wonders never cease to amaze.
- */
-static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
- *val = 0xffffffff;
-
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
- if (!gapspci_config_access(bus->number, devfn))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops gapspci_pci_ops = {
- .read = gapspci_read,
- .write = gapspci_write,
-};
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
deleted file mode 100644
index a205be3bfc4a67..00000000000000
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <asm/addrspace.h>
-#include "pci-sh4.h"
-
-/*
- * Direct access to PCI hardware...
- */
-#define CONFIG_CMD(bus, devfn, where) \
- (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- u32 data;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since SH4 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- struct pci_channel *chan = bus->sysdata;
- unsigned long flags;
- int shift;
- u32 data;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(chan, SH4_PCIPDR);
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- pci_write_reg(chan, data, SH4_PCIPDR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops sh4_pci_ops = {
- .read = sh4_pci_read,
- .write = sh4_pci_write,
-};
-
-int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
-{
- /* Nothing to do. */
- return 0;
-}
diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
deleted file mode 100644
index a10f9f4ebd7fe9..00000000000000
--- a/arch/sh/drivers/pci/ops-sh7786.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic SH7786 PCI-Express operations.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include "pcie-sh7786.h"
-
-enum {
- PCI_ACCESS_READ,
- PCI_ACCESS_WRITE,
-};
-
-static int sh7786_pcie_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
-{
- struct pci_channel *chan = bus->sysdata;
- int dev, func, type, reg;
-
- dev = PCI_SLOT(devfn);
- func = PCI_FUNC(devfn);
- type = !!bus->parent;
- reg = where & ~3;
-
- if (bus->number > 255 || dev > 31 || func > 7)
- return PCIBIOS_FUNC_NOT_SUPPORTED;
-
- /*
- * While each channel has its own memory-mapped extended config
- * space, it's generally only accessible when in endpoint mode.
- * When in root complex mode, the controller is unable to target
- * itself with either type 0 or type 1 accesses, and indeed, any
- * controller initiated target transfer to its own config space
- * result in a completer abort.
- *
- * Each channel effectively only supports a single device, but as
- * the same channel <-> device access works for any PCI_SLOT()
- * value, we cheat a bit here and bind the controller's config
- * space to devfn 0 in order to enable self-enumeration. In this
- * case the regular PAR/PDR path is sidelined and the mangled
- * config access itself is initiated as a SuperHyway transaction.
- */
- if (pci_is_root_bus(bus)) {
- if (dev == 0) {
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, PCI_REG(reg));
- else
- pci_write_reg(chan, *data, PCI_REG(reg));
-
- return PCIBIOS_SUCCESSFUL;
- } else if (dev > 1)
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- /* Clear errors */
- pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR);
-
- /* Set the PIO address */
- pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
- (func << 16) | reg, SH4A_PCIEPAR);
-
- /* Enable the configuration access */
- pci_write_reg(chan, (1 << 31) | (type << 8), SH4A_PCIEPCTLR);
-
- /* Check for errors */
- if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* Check for master and target aborts */
- if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (access_type == PCI_ACCESS_READ)
- *data = pci_read_reg(chan, SH4A_PCIEPDR);
- else
- pci_write_reg(chan, *data, SH4A_PCIEPDR);
-
- /* Disable the configuration access */
- pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- int ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL) {
- *val = 0xffffffff;
- goto out;
- }
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- else
- *val = data;
-
- dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=0x%08lx\n", bus->number,
- devfn, where, size, (unsigned long)*val);
-
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- int shift, ret;
- u32 data;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
- ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
- devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- goto out;
-
- dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
- "where=0x%04x size=%d val=%08lx\n", bus->number,
- devfn, where, size, (unsigned long)val);
-
- if (size == 1) {
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- } else if (size == 2) {
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- } else
- data = val;
-
- ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
- devfn, where, &data);
-out:
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return ret;
-}
-
-struct pci_ops sh7786_pci_ops = {
- .read = sh7786_pcie_read,
- .write = sh7786_pcie_write,
-};
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
deleted file mode 100644
index 4cff2a8107bf06..00000000000000
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PCI support for the Sega Dreamcast
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pci.h>
-
-static struct resource gapspci_resources[] = {
- {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct pci_channel dreamcast_pci_controller = {
- .pci_ops = &gapspci_pci_ops,
- .resources = gapspci_resources,
- .nr_resources = ARRAY_SIZE(gapspci_resources),
- .io_offset = 0x00000000,
- .mem_offset = 0x00000000,
-};
-
-/*
- * gapspci init
- */
-
-static int __init gapspci_init(void)
-{
- char idbuf[16];
- int i;
-
- /*
- * FIXME: All of this wants documenting to some degree,
- * even some basic register definitions would be nice.
- *
- * I haven't seen anything this ugly since.. maple.
- */
-
- for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
-
- if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
- return -ENODEV;
-
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
- for (i=0; i<1000000; i++)
- cpu_relax();
-
- if (inl(GAPSPCI_REGS+0x18) != 1)
- return -EINVAL;
-
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
-
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
-
- /* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
- return register_pci_controller(&dreamcast_pci_controller);
-}
-arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
deleted file mode 100644
index 1543c50b65031c..00000000000000
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PCI_SH4_H
-#define __PCI_SH4_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763)
-#include "pci-sh7780.h"
-#else
-#include "pci-sh7751.h"
-#endif
-
-#include <asm/io.h>
-
-#define SH4_PCICR 0x100 /* PCI Control Register */
- #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
- #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
- #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */
- #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */
- #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
- #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
- #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */
- #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */
- #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */
- #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */
- #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
-#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
-#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
-#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
-#define SH4_PCIINT 0x114 /* PCI Interrupt Register */
- #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */
- #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */
- #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */
- #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
- #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */
- #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */
- #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
- #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */
- #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
- #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
- #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
- #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
-#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
- #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
- #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
- #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
- #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
- #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
- #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
- #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
- #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
- #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
- #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
- #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
-#define SH4_PCIALR 0x11C /* Error Address Register */
-#define SH4_PCICLR 0x120 /* Error Command/Data */
- #define SH4_PCICLR_MPIO 0x80000000
- #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
- #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
- #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
- #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
- #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */
- #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
-#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
- #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
- #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
- #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
- #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
- #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
- #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */
-#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */
- #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
- #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
- #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
- #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
- #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
-#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
- #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
-#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */
-#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */
-#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */
-#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */
- #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
- #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
- #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
- #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
- #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */
- #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
- #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
- #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
- #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
- #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */
-#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */
-#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */
-#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */
-#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */
-#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */
-#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */
-#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */
-#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */
-#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */
-#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */
-#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */
-#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */
-#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
- #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
- #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
- #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
- #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
-#define SH4_PCIMBR 0x1C4 /* Memory Base Address */
- #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
- #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
-#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */
- #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
- #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
-#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
- #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
- #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
-#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
- #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
- #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
- #define SH4_PCIMBR0 SH4_PCIBCR1
-#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
- #define SH4_PCIMBMR0 SH4_PCIBCR2
-#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
-#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
-#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
- #define SH4_PCIMBR2 SH4_PCIWCR3
-#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
-#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */
-#define SH4_PCIPCTR 0x200 /* Port Control Register */
- #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
- #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
- #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
- #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
- #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
- #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
- #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
- #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
- #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
-#define SH4_PCIPDTR 0x204 /* Port Data Register */
- #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
- #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
- #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
- #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
- #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
- #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
-#define SH4_PCIPDR 0x220 /* Port IO Data Register */
-
-/* arch/sh/kernel/drivers/pci/ops-sh4.c */
-extern struct pci_ops sh4_pci_ops;
-int pci_fixup_pcic(struct pci_channel *chan);
-
-struct sh4_pci_address_space {
- unsigned long base;
- unsigned long size;
-};
-
-struct sh4_pci_address_map {
- struct sh4_pci_address_space window0;
- struct sh4_pci_address_space window1;
-};
-
-static inline void pci_write_reg(struct pci_channel *chan,
- unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long pci_read_reg(struct pci_channel *chan,
- unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
deleted file mode 100644
index 11ed21c2e9bb10..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7751
- *
- * Copyright (C) 2003 - 2009 Paul Mundt
- * Copyright (C) 2001 Dustin McIntire
- *
- * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include "pci-sh4.h"
-#include <asm/addrspace.h>
-#include <linux/sizes.h>
-
-static int __init __area_sdram_check(struct pci_channel *chan,
- unsigned int area)
-{
- unsigned long word;
-
- word = __raw_readl(SH7751_BCR1);
- /* check BCR for SDRAM in area */
- if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR1);
-
- word = __raw_readw(SH7751_BCR2);
- /* check BCR2 for 32bit SDRAM interface*/
- if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
- area, word);
- return 0;
- }
- pci_write_reg(chan, word, SH4_PCIBCR2);
-
- return 1;
-}
-
-static struct resource sh7751_pci_resources[] = {
- {
- .name = "SH7751_IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO
- }, {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
- },
-};
-
-static struct pci_channel sh7751_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7751_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7751_pci_resources),
- .mem_offset = 0x00000000,
- .io_offset = 0x00000000,
- .io_map_base = SH7751_PCI_IO_BASE,
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-};
-
-static int __init sh7751_pci_init(void)
-{
- struct pci_channel *chan = &sh7751_pci_controller;
- unsigned int id;
- u32 word, reg;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe200000;
-
- /* check for SH7751/SH7751R hardware */
- id = pci_read_reg(chan, SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- /* Set the BCR's to enable PCI access */
- reg = __raw_readl(SH7751_BCR1);
- reg |= 0x80000;
- __raw_writel(reg, SH7751_BCR1);
-
- /* Turn the clocks back on (not done in reset)*/
- pci_write_reg(chan, 0, SH4_PCICLKR);
- /* Clear Powerdown IRQ's (not done in reset) */
- word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(chan, word, SH4_PCIPINT);
-
- /* set the command/status bits to:
- * Wait Cycle Control + Parity Enable + Bus Master +
- * Mem space enable
- */
- word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
- SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(chan, word, SH7751_PCICONF1);
-
- /* define this host as the host bridge */
- word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(chan, word, SH7751_PCICONF2);
-
- /* Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
- */
- word = sh7751_pci_map.window0.size - 1;
- pci_write_reg(chan, word, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(sh7751_pci_map.window0.base);
- pci_write_reg(chan, word, SH4_PCILAR0);
- pci_write_reg(chan, word, SH7751_PCICONF5);
-
- /* Set the local 16MB PCI memory space window to
- * the lowest PCI mapped address
- */
- word = chan->resources[1].start & SH4_PCIMBR_MASK;
- pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(chan, word , SH4_PCIMBR);
-
- /* Make sure the MSB's of IO window are set to access PCI space
- * correctly */
- word = chan->resources[0].start & SH4_PCIIOBR_MASK;
- pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(chan, word, SH4_PCIIOBR);
-
- /* Set PCI WCRx, BCRx's, copy from BSC locations */
-
- /* check BCR for SDRAM in specified area */
- switch (sh7751_pci_map.window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
- }
-
- if (!word)
- return -1;
-
- /* configure the wait control registers */
- word = __raw_readl(SH7751_WCR1);
- pci_write_reg(chan, word, SH4_PCIWCR1);
- word = __raw_readl(SH7751_WCR2);
- pci_write_reg(chan, word, SH4_PCIWCR2);
- word = __raw_readl(SH7751_WCR3);
- pci_write_reg(chan, word, SH4_PCIWCR3);
- word = __raw_readl(SH7751_MCR);
- pci_write_reg(chan, word, SH4_PCIMCR);
-
- /* NOTE: I'm ignoring the PCI error IRQs for now..
- * TODO: add support for the internal error interrupts and
- * DMA interrupts...
- */
-
- pci_fixup_pcic(chan);
-
- /* SH7751 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(chan, word, SH4_PCICR);
-
- return register_pci_controller(chan);
-}
-arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
deleted file mode 100644
index d1951e50effc8b..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7751 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7751_H_
-#define _PCI_SH7751_H_
-
-/* Platform Specific Values */
-#define SH7751_VENDOR_ID 0x1054
-#define SH7751_DEVICE_ID 0x3505
-#define SH7751R_DEVICE_ID 0x350e
-
-/* SH7751 Specific Values */
-#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */
-#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
-#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */
-#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
-
-#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
-
-#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
- #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
- #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */
-#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */
- #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */
- #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */
- #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */
- #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */
- #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */
- #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */
- #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */
- #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */
- #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */
- #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */
- #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */
- #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */
- #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */
- #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */
- #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */
- #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */
- #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */
- #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */
- #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */
- #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */
- #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */
-#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */
- #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */
- #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
- #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
- #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
-#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
- #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
- #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
- #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
- #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */
- #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */
- #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */
- #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */
-#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */
- #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */
- #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */
- #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
-#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
- #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
- #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
- #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
-/* PCICONF7 - PCICONF10 are undefined */
-#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
- #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
- #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */
-/* PCICONF12 is undefined */
-#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */
- #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */
-/* PCICONF14 is undefined */
-#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */
- #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */
-#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */
- #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */
- #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */
- #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */
- #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */
- #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */
- #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */
- #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */
- #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */
-#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */
- #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */
- #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */
- #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */
- #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */
- #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
- #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
-/* SH7715 Internal PCI Registers */
-
-/* Memory Control Registers */
-#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
-#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */
-#define SH7751_BCR3 0xFF800050 /* Memory BCR3 Register */
-#define SH7751_BCR4 0xFE0A00F0 /* Memory BCR4 Register */
-#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */
-#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */
-#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */
-#define SH7751_MCR 0xFF800014 /* Memory Control Register */
-
-/* General Memory Config Addresses */
-#define SH7751_CS0_BASE_ADDR 0x0
-#define SH7751_MEM_REGION_SIZE 0x04000000
-#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-
-#endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
deleted file mode 100644
index 9a624a6ee35479..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ /dev/null
@@ -1,407 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Support for the SH7780
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/log2.h>
-#include "pci-sh4.h"
-#include <asm/mmu.h>
-#include <linux/sizes.h>
-
-#if defined(CONFIG_CPU_BIG_ENDIAN)
-# define PCICR_ENDIANNESS SH4_PCICR_BSWP
-#else
-# define PCICR_ENDIANNESS 0
-#endif
-
-
-static struct resource sh7785_pci_resources[] = {
- {
- .name = "PCI IO",
- .start = 0x1000,
- .end = SZ_4M - 1,
- .flags = IORESOURCE_IO,
- }, {
- .name = "PCI MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCI MEM 1",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /*
- * 32-bit only resources must be last.
- */
- .name = "PCI MEM 2",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
-};
-
-static struct pci_channel sh7780_pci_controller = {
- .pci_ops = &sh4_pci_ops,
- .resources = sh7785_pci_resources,
- .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
- .io_offset = 0,
- .mem_offset = 0,
- .io_map_base = 0xfe200000,
- .serr_irq = evt2irq(0xa00),
- .err_irq = evt2irq(0xaa0),
-};
-
-struct pci_errors {
- unsigned int mask;
- const char *str;
-} pci_arbiter_errors[] = {
- { SH4_PCIAINT_MBKN, "master broken" },
- { SH4_PCIAINT_TBTO, "target bus time out" },
- { SH4_PCIAINT_MBTO, "master bus time out" },
- { SH4_PCIAINT_TABT, "target abort" },
- { SH4_PCIAINT_MABT, "master abort" },
- { SH4_PCIAINT_RDPE, "read data parity error" },
- { SH4_PCIAINT_WDPE, "write data parity error" },
-}, pci_interrupt_errors[] = {
- { SH4_PCIINT_MLCK, "master lock error" },
- { SH4_PCIINT_TABT, "target-target abort" },
- { SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable error" },
- { SH4_PCIINT_PRTY, "address parity error" },
- { SH4_PCIINT_SERR, "SERR" },
- { SH4_PCIINT_TWDP, "data parity error for target write" },
- { SH4_PCIINT_TRDP, "PERR detected for target read" },
- { SH4_PCIINT_MTABT, "target abort for master" },
- { SH4_PCIINT_MMABT, "master abort for master" },
- { SH4_PCIINT_MWPD, "master write data parity error" },
- { SH4_PCIINT_MRPD, "master read data parity error" },
-};
-
-static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
- unsigned long addr;
- unsigned int status;
- unsigned int cmd;
- int i;
-
- addr = __raw_readl(hose->reg_base + SH4_PCIALR);
-
- /*
- * Handle status errors.
- */
- status = __raw_readw(hose->reg_base + PCI_STATUS);
- if (status & (PCI_STATUS_PARITY |
- PCI_STATUS_DETECTED_PARITY |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT)) {
- cmd = pcibios_handle_status_errors(addr, status, hose);
- if (likely(cmd))
- __raw_writew(cmd, hose->reg_base + PCI_STATUS);
- }
-
- /*
- * Handle arbiter errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIAINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
- if (status & pci_arbiter_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_arbiter_errors[i].str, addr);
- cmd |= pci_arbiter_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
-
- /*
- * Handle the remaining PCI errors.
- */
- status = __raw_readl(hose->reg_base + SH4_PCIINT);
- for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
- if (status & pci_interrupt_errors[i].mask) {
- printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
- pci_interrupt_errors[i].str, addr);
- cmd |= pci_interrupt_errors[i].mask;
- }
- }
- __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
-{
- struct pci_channel *hose = dev_id;
-
- printk(KERN_DEBUG "PCI: system error received: ");
- pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
- pr_cont("\n");
-
- /* Deassert SERR */
- __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
-
- /* Back off the IRQ for awhile */
- disable_irq_nosync(irq);
- hose->serr_timer.expires = jiffies + HZ;
- add_timer(&hose->serr_timer);
-
- return IRQ_HANDLED;
-}
-
-static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
-{
- int ret;
-
- /* Clear out PCI arbiter IRQs */
- __raw_writel(0, hose->reg_base + SH4_PCIAINT);
-
- /* Clear all error conditions */
- __raw_writew(PCI_STATUS_DETECTED_PARITY | \
- PCI_STATUS_SIG_SYSTEM_ERROR | \
- PCI_STATUS_REC_MASTER_ABORT | \
- PCI_STATUS_REC_TARGET_ABORT | \
- PCI_STATUS_SIG_TARGET_ABORT | \
- PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
-
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
- "PCI SERR interrupt", hose);
- if (unlikely(ret)) {
- pr_err("PCI: Failed hooking SERR IRQ\n");
- return ret;
- }
-
- /*
- * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
- * down IRQ vectors are routed through the ERR IRQ vector. We
- * only request_irq() once as there is only a single masking
- * source for multiple events.
- */
- ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
- "PCI ERR interrupt", hose);
- if (unlikely(ret)) {
- free_irq(hose->serr_irq, hose);
- return ret;
- }
-
- /* Unmask all of the arbiter IRQs. */
- __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
- SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
- SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
-
- /* Unmask all of the PCI IRQs */
- __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
- SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
- SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
- SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
- SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
- SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
-
- return ret;
-}
-
-static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
-{
- free_irq(hose->err_irq, hose);
- free_irq(hose->serr_irq, hose);
-}
-
-static void __init sh7780_pci66_init(struct pci_channel *hose)
-{
- unsigned int tmp;
-
- if (!pci_is_66mhz_capable(hose, 0, 0))
- return;
-
- /* Enable register access */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-
- /* Enable 66MHz operation */
- tmp = __raw_readw(hose->reg_base + PCI_STATUS);
- tmp |= PCI_STATUS_66MHZ;
- __raw_writew(tmp, hose->reg_base + PCI_STATUS);
-
- /* Done */
- tmp = __raw_readl(hose->reg_base + SH4_PCICR);
- tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
- __raw_writel(tmp, hose->reg_base + SH4_PCICR);
-}
-
-static int __init sh7780_pci_init(void)
-{
- struct pci_channel *chan = &sh7780_pci_controller;
- phys_addr_t memphys;
- size_t memsize;
- unsigned int id;
- const char *type;
- int ret, i;
-
- pr_notice("PCI: Starting initialization.\n");
-
- chan->reg_base = 0xfe040000;
-
- /* Enable CPU access to the PCIC registers. */
- __raw_writel(PCIECR_ENBL, PCIECR);
-
- /* Reset */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- /*
- * Wait for it to come back up. The spec says to allow for up to
- * 1 second after toggling the reset pin, but in practice 100ms
- * is more than enough.
- */
- mdelay(100);
-
- id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
- if (id != PCI_VENDOR_ID_RENESAS) {
- pr_err("PCI: Unknown vendor ID 0x%04x.\n", id);
- return -ENODEV;
- }
-
- id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
- type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
- (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
- (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
- (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
- NULL;
- if (unlikely(!type)) {
- pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n",
- id);
- return -EINVAL;
- }
-
- pr_notice("PCI: Found a Renesas %s host controller, revision %d.\n",
- type, __raw_readb(chan->reg_base + PCI_REVISION_ID));
-
- /*
- * Now throw it in to register initialization mode and
- * start the real work.
- */
- __raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- memphys = __pa(memory_start);
- memsize = roundup_pow_of_two(memory_end - memory_start);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LSR1.
- */
- if (memsize > SZ_512M) {
- __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
- __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- __raw_writel(0, chan->reg_base + SH4_PCILAR1);
- __raw_writel(0, chan->reg_base + SH4_PCILSR1);
- }
-
- /*
- * LAR0/LSR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
- __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
- chan->reg_base + SH4_PCILSR0);
-
- /*
- * Hook up the ERR and SERR IRQs.
- */
- ret = sh7780_pci_setup_irqs(chan);
- if (unlikely(ret))
- return ret;
-
- /*
- * Disable the cache snoop controller for non-coherent DMA.
- */
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
- __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
- __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
-
- /*
- * Setup the memory BARs
- */
- for (i = 1; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
-
- if (unlikely(res->flags & IORESOURCE_IO))
- continue;
-
- /*
- * Make sure we're in the right physical addressing mode
- * for dealing with the resource.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
- chan->nr_resources--;
- continue;
- }
-
- size = resource_size(res);
-
- /*
- * The MBMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
- chan->reg_base + SH7780_PCIMBMR(i - 1));
- __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
- }
-
- /*
- * And I/O.
- */
- __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
- __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
-
- __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
- PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
- PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
-
- /*
- * Initialization mode complete, release the control register and
- * enable round robin mode to stop device overruns/starvation.
- */
- __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO |
- PCICR_ENDIANNESS,
- chan->reg_base + SH4_PCICR);
-
- ret = register_pci_controller(chan);
- if (unlikely(ret))
- goto err;
-
- sh7780_pci66_init(chan);
-
- pr_notice("PCI: Running at %dMHz.\n",
- (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ)
- ? 66 : 33);
-
- return 0;
-
-err:
- sh7780_pci_teardown_irqs(chan);
- return ret;
-}
-arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
deleted file mode 100644
index e2ac770f8e3502..00000000000000
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Low-Level PCI Support for SH7780 targets
- *
- * Dustin McIntire (dustin@sensoria.com) (c) 2001
- * Paul Mundt (lethal@linux-sh.org) (c) 2003
- */
-
-#ifndef _PCI_SH7780_H_
-#define _PCI_SH7780_H_
-
-/* SH7780 Control Registers */
-#define PCIECR 0xFE000008
-#define PCIECR_ENBL 0x01
-
-/* SH7780 Specific Values */
-#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
-#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
-
-#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
-
-/* SH7780 PCI Config Registers */
-#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
-#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
-#define SH7780_PCIAIR 0x11C /* Error Address Register */
-#define SH7780_PCICIR 0x120 /* Error Command/Data Register */
-#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */
-#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */
-#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */
-#define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
-#define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-
-#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8))
-#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8))
-#define SH7780_PCIIOBR 0x1F8
-#define SH7780_PCIIOBMR 0x1FC
-#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
-#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */
-#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
-#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
-
-#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
deleted file mode 100644
index a3903304f33faa..00000000000000
--- a/arch/sh/drivers/pci/pci.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * New-style PCI core.
- *
- * Copyright (c) 2004 - 2009 Paul Mundt
- * Copyright (c) 2002 M. R. Brown
- *
- * Modelled after arch/mips/pci/pci.c:
- * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-unsigned long PCIBIOS_MIN_IO = 0x0000;
-unsigned long PCIBIOS_MIN_MEM = 0;
-
-/*
- * The PCI controller list.
- */
-static struct pci_channel *hose_head, **hose_tail = &hose_head;
-
-static int pci_initialized;
-
-static void pcibios_scanbus(struct pci_channel *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct resource *res;
- resource_size_t offset;
- int i, ret;
- struct pci_host_bridge *bridge;
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- return;
-
- for (i = 0; i < hose->nr_resources; i++) {
- res = hose->resources + i;
- offset = 0;
- if (res->flags & IORESOURCE_DISABLED)
- continue;
- if (res->flags & IORESOURCE_IO)
- offset = hose->io_offset;
- else if (res->flags & IORESOURCE_MEM)
- offset = hose->mem_offset;
- pci_add_resource_offset(&resources, res, offset);
- }
-
- list_splice_init(&resources, &bridge->windows);
- bridge->dev.parent = NULL;
- bridge->sysdata = hose;
- bridge->busnr = next_busno;
- bridge->ops = hose->pci_ops;
- bridge->swizzle_irq = pci_common_swizzle;
- bridge->map_irq = pcibios_map_platform_irq;
-
- ret = pci_scan_root_bus_bridge(bridge);
- if (ret) {
- pci_free_host_bridge(bridge);
- return;
- }
-
- hose->bus = bridge->bus;
-
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
-
- next_busno = hose->bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- pci_bus_size_bridges(hose->bus);
- pci_bus_assign_resources(hose->bus);
- pci_bus_add_devices(hose->bus);
-}
-
-/*
- * This interrupt-safe spinlock protects all accesses to PCI
- * configuration space.
- */
-DEFINE_RAW_SPINLOCK(pci_config_lock);
-static DEFINE_MUTEX(pci_scan_mutex);
-
-int register_pci_controller(struct pci_channel *hose)
-{
- int i;
-
- for (i = 0; i < hose->nr_resources; i++) {
- struct resource *res = hose->resources + i;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- if (res->flags & IORESOURCE_IO) {
- if (request_resource(&ioport_resource, res) < 0)
- goto out;
- } else {
- if (request_resource(&iomem_resource, res) < 0)
- goto out;
- }
- }
-
- *hose_tail = hose;
- hose_tail = &hose->next;
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- pr_warn("registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Setup the ERR/PERR and SERR timers, if available.
- */
- pcibios_enable_timers(hose);
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return 0;
-
-out:
- for (--i; i >= 0; i--)
- release_resource(&hose->resources[i]);
-
- pr_warn("Skipping PCI bus scan due to resource conflict\n");
- return -1;
-}
-
-static int __init pcibios_init(void)
-{
- struct pci_channel *hose;
-
- /* Scan all of the recorded PCI controllers. */
- for (hose = hose_head; hose; hose = hose->next)
- pcibios_scanbus(hose);
-
- pci_initialized = 1;
-
- return 0;
-}
-subsys_initcall(pcibios_init);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_channel *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
- start = PCIBIOS_MIN_IO + hose->resources[0].start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400.
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- }
-
- return start;
-}
-
-static void __init
-pcibios_bus_report_status_early(struct pci_channel *hose,
- int top_bus, int current_bus,
- unsigned int status_mask, int warn)
-{
- unsigned int pci_devfn;
- u16 status;
- int ret;
-
- for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
- if (PCI_FUNC(pci_devfn))
- continue;
- ret = early_read_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS, &status);
- if (ret != PCIBIOS_SUCCESSFUL)
- continue;
- if (status == 0xffff)
- continue;
-
- early_write_config_word(hose, top_bus, current_bus,
- pci_devfn, PCI_STATUS,
- status & status_mask);
- if (warn)
- pr_cont("(%02x:%02x: %04X) ", current_bus, pci_devfn,
- status);
- }
-}
-
-/*
- * We can't use pci_find_device() here since we are
- * called from interrupt context.
- */
-static void __ref
-pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
- int warn)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 status;
-
- /*
- * ignore host bridge - we handle
- * that separately
- */
- if (dev->bus->number == 0 && dev->devfn == 0)
- continue;
-
- pci_read_config_word(dev, PCI_STATUS, &status);
- if (status == 0xffff)
- continue;
-
- if ((status & status_mask) == 0)
- continue;
-
- /* clear the status errors */
- pci_write_config_word(dev, PCI_STATUS, status & status_mask);
-
- if (warn)
- pr_cont("(%s: %04X) ", pci_name(dev), status);
- }
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- if (dev->subordinate)
- pcibios_bus_report_status(dev->subordinate, status_mask, warn);
-}
-
-void __ref pcibios_report_status(unsigned int status_mask, int warn)
-{
- struct pci_channel *hose;
-
- for (hose = hose_head; hose; hose = hose->next) {
- if (unlikely(!hose->bus))
- pcibios_bus_report_status_early(hose, hose_head->index,
- hose->index, status_mask, warn);
- else
- pcibios_bus_report_status(hose->bus, status_mask, warn);
- }
-}
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *__pci_ioport_map(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
-{
- struct pci_channel *chan = dev->sysdata;
-
- if (unlikely(!chan->io_map_base)) {
- chan->io_map_base = sh_io_port_base;
-
- if (pci_domains_supported)
- panic("To avoid data corruption io_map_base MUST be "
- "set with multiple PCI domains.");
- }
-
- return (void __iomem *)(chan->io_map_base + port);
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
- iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
deleted file mode 100644
index b0c2a5238d0497..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ /dev/null
@@ -1,609 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Low-Level PCI Express Support for the SH7786
- *
- * Copyright (C) 2009 - 2011 Paul Mundt
- */
-#define pr_fmt(fmt) "PCI: " fmt
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/async.h>
-#include <linux/delay.h>
-#include <linux/dma-map-ops.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/sh_intc.h>
-#include <cpu/sh7786.h>
-#include "pcie-sh7786.h"
-#include <linux/sizes.h>
-
-struct sh7786_pcie_port {
- struct pci_channel *hose;
- struct clk *fclk, phy_clk;
- unsigned int index;
- int endpoint;
- int link;
-};
-
-static struct sh7786_pcie_port *sh7786_pcie_ports;
-static unsigned int nr_ports;
-static unsigned long dma_pfn_offset;
-size_t memsize;
-u64 memstart;
-
-static struct sh7786_pcie_hwops {
- int (*core_init)(void);
- async_func_t port_init_hw;
-} *sh7786_pcie_hwops;
-
-static struct resource sh7786_pci0_resources[] = {
- {
- .name = "PCIe0 MEM 0",
- .start = 0xfd000000,
- .end = 0xfd000000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 MEM 1",
- .start = 0xc0000000,
- .end = 0xc0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe0 MEM 2",
- .start = 0x10000000,
- .end = 0x10000000 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe0 IO",
- .start = 0xfe100000,
- .end = 0xfe100000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci1_resources[] = {
- {
- .name = "PCIe1 MEM 0",
- .start = 0xfd800000,
- .end = 0xfd800000 + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe1 MEM 1",
- .start = 0xa0000000,
- .end = 0xa0000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 MEM 2",
- .start = 0x30000000,
- .end = 0x30000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe1 IO",
- .start = 0xfe300000,
- .end = 0xfe300000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct resource sh7786_pci2_resources[] = {
- {
- .name = "PCIe2 MEM 0",
- .start = 0xfc800000,
- .end = 0xfc800000 + SZ_4M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "PCIe2 MEM 1",
- .start = 0x80000000,
- .end = 0x80000000 + SZ_512M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 MEM 2",
- .start = 0x20000000,
- .end = 0x20000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- }, {
- .name = "PCIe2 IO",
- .start = 0xfcd00000,
- .end = 0xfcd00000 + SZ_1M - 1,
- .flags = IORESOURCE_IO,
- },
-};
-
-extern struct pci_ops sh7786_pci_ops;
-
-#define DEFINE_CONTROLLER(start, idx) \
-{ \
- .pci_ops = &sh7786_pci_ops, \
- .resources = sh7786_pci##idx##_resources, \
- .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
- .reg_base = start, \
- .mem_offset = 0, \
- .io_offset = 0, \
-}
-
-static struct pci_channel sh7786_pci_channels[] = {
- DEFINE_CONTROLLER(0xfe000000, 0),
- DEFINE_CONTROLLER(0xfe200000, 1),
- DEFINE_CONTROLLER(0xfcc00000, 2),
-};
-
-static struct clk fixed_pciexclkp = {
- .rate = 100000000, /* 100 MHz reference clock */
-};
-
-static void sh7786_pci_fixup(struct pci_dev *dev)
-{
- /*
- * Prevent enumeration of root complex resources.
- */
- if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
- int i;
-
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
- sh7786_pci_fixup);
-
-static int __init phy_wait_for_ack(struct pci_channel *chan)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
-{
- unsigned int timeout = 100;
-
- while (timeout--) {
- if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
- unsigned int lane, unsigned int data)
-{
- unsigned long phyaddr;
-
- phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
- ((addr & 0xff) << BITS_ADR);
-
- /* Set write data */
- pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-
- /* Clear command */
- pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
- pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
-
- phy_wait_for_ack(chan);
-}
-
-static int __init pcie_clk_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- struct clk *clk;
- char fclk_name[16];
- int ret;
-
- /*
- * First register the fixed clock
- */
- ret = clk_register(&fixed_pciexclkp);
- if (unlikely(ret != 0))
- return ret;
-
- /*
- * Grab the port's function clock, which the PHY clock depends
- * on. clock lookups don't help us much at this point, since no
- * dev_id is available this early. Lame.
- */
- snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
-
- port->fclk = clk_get(NULL, fclk_name);
- if (IS_ERR(port->fclk)) {
- ret = PTR_ERR(port->fclk);
- goto err_fclk;
- }
-
- clk_enable(port->fclk);
-
- /*
- * And now, set up the PHY clock
- */
- clk = &port->phy_clk;
-
- memset(clk, 0, sizeof(struct clk));
-
- clk->parent = &fixed_pciexclkp;
- clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
- clk->enable_bit = BITS_CKE;
-
- ret = sh_clk_mstp_register(clk, 1);
- if (unlikely(ret < 0))
- goto err_phy;
-
- return 0;
-
-err_phy:
- clk_disable(port->fclk);
- clk_put(port->fclk);
-err_fclk:
- clk_unregister(&fixed_pciexclkp);
-
- return ret;
-}
-
-static int __init phy_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int timeout = 100;
-
- clk_enable(&port->phy_clk);
-
- /* Initialize the phy */
- phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
- phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
- phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
- phy_write_reg(chan, 0x65, 0xf, 0x09070907);
- phy_write_reg(chan, 0x66, 0xf, 0x00000010);
- phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
- phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
- phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
-
- /* Deassert Standby */
- phy_write_reg(chan, 0x67, 0x1, 0x00000400);
-
- /* Disable clock */
- clk_disable(&port->phy_clk);
-
- while (timeout--) {
- if (pci_read_reg(chan, SH4A_PCIEPHYSR))
- return 0;
-
- udelay(100);
- }
-
- return -ETIMEDOUT;
-}
-
-static void __init pcie_reset(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
-
- pci_write_reg(chan, 1, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETCTLR);
- pci_write_reg(chan, 0, SH4A_PCIESRSTR);
- pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
-}
-
-static int __init pcie_init(struct sh7786_pcie_port *port)
-{
- struct pci_channel *chan = port->hose;
- unsigned int data;
- phys_addr_t memstart, memend;
- int ret, i, win;
-
- /* Begin initialization */
- pcie_reset(port);
-
- /*
- * Initial header for port config space is type 1, set the device
- * class to match. Hardware takes care of propagating the IDSETR
- * settings, so there is no need to bother with a quirk.
- */
- pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI_NORMAL << 8, SH4A_PCIEIDSETR1);
-
- /* Initialize default capabilities. */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
- data &= ~(PCI_EXP_FLAGS_TYPE << 16);
-
- if (port->endpoint)
- data |= PCI_EXP_TYPE_ENDPOINT << 20;
- else
- data |= PCI_EXP_TYPE_ROOT_PORT << 20;
-
- data |= PCI_CAP_ID_EXP;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
-
- /* Enable data link layer active state reporting */
- pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
-
- /* Enable extended sync and ASPM L0s support */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
- data &= ~PCI_EXP_LNKCTL_ASPMC;
- data |= PCI_EXP_LNKCTL_ES | 1;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
-
- /* Write out the physical slot number */
- data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
- data &= ~PCI_EXP_SLTCAP_PSN;
- data |= (port->index + 1) << 19;
- pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
-
- /* Set the completion timer timeout to the maximum 32ms. */
- data = pci_read_reg(chan, SH4A_PCIETLCTLR);
- data &= ~0x3f00;
- data |= 0x32 << 8;
- pci_write_reg(chan, data, SH4A_PCIETLCTLR);
-
- /*
- * Set fast training sequences to the maximum 255,
- * and enable MAC data scrambling.
- */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data &= ~PCIEMACCTLR_SCR_DIS;
- data |= (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- memstart = __pa(memory_start);
- memend = __pa(memory_end);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * The start address must be aligned on its size. So we round
- * it down, and then recalculate the size so that it covers
- * the entire memory.
- */
- memstart = ALIGN_DOWN(memstart, memsize);
- memsize = roundup_pow_of_two(memend - memstart);
-
- /*
- * If there's more than 512MB of memory, we need to roll over to
- * LAR1/LAMR1.
- */
- if (memsize > SZ_512M) {
- pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1);
- pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
- SH4A_PCIELAMR1);
- memsize = SZ_512M;
- } else {
- /*
- * Otherwise just zero it out and disable it.
- */
- pci_write_reg(chan, 0, SH4A_PCIELAR1);
- pci_write_reg(chan, 0, SH4A_PCIELAMR1);
- }
-
- /*
- * LAR0/LAMR0 covers up to the first 512MB, which is enough to
- * cover all of lowmem on most platforms.
- */
- pci_write_reg(chan, memstart, SH4A_PCIELAR0);
- pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
-
- /* Finish initialization */
- data = pci_read_reg(chan, SH4A_PCIETCTLR);
- data |= 0x1;
- pci_write_reg(chan, data, SH4A_PCIETCTLR);
-
- /* Let things settle down a bit.. */
- mdelay(100);
-
- /* Enable DL_Active Interrupt generation */
- data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
- data |= PCIEDLINTENR_DLL_ACT_ENABLE;
- pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
-
- /* Disable MAC data scrambling. */
- data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
- data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
- pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
-
- /*
- * This will timeout if we don't have a link, but we permit the
- * port to register anyways in order to support hotplug on future
- * hardware.
- */
- ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
-
- data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
- data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
- data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
- pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
-
- pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
- pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
-
- wmb();
-
- if (ret == 0) {
- data = pci_read_reg(chan, SH4A_PCIEMACSR);
- printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
- port->index, (data >> 20) & 0x3f);
- } else
- printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
- port->index);
-
- for (i = win = 0; i < chan->nr_resources; i++) {
- struct resource *res = chan->resources + i;
- resource_size_t size;
- u32 mask;
-
- /*
- * We can't use the 32-bit mode windows in legacy 29-bit
- * mode, so just skip them entirely.
- */
- if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
- res->flags |= IORESOURCE_DISABLED;
-
- if (res->flags & IORESOURCE_DISABLED)
- continue;
-
- pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
-
- /*
- * The PAMR mask is calculated in units of 256kB, which
- * keeps things pretty simple.
- */
- size = resource_size(res);
- mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
- pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
-
- pci_write_reg(chan, upper_32_bits(res->start),
- SH4A_PCIEPARH(win));
- pci_write_reg(chan, lower_32_bits(res->start),
- SH4A_PCIEPARL(win));
-
- mask = MASK_PARE;
- if (res->flags & IORESOURCE_IO)
- mask |= MASK_SPC;
-
- pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
-
- win++;
- }
-
- return 0;
-}
-
-int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return evt2irq(0xae0);
-}
-
-void pcibios_bus_add_device(struct pci_dev *pdev)
-{
- dma_direct_set_offset(&pdev->dev, __pa(memory_start),
- __pa(memory_start) - memstart, memsize);
-}
-
-static int __init sh7786_pcie_core_init(void)
-{
- /* Return the number of ports */
- return test_mode_pin(MODE_PIN12) ? 3 : 2;
-}
-
-static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie)
-{
- struct sh7786_pcie_port *port = data;
- int ret;
-
- /*
- * Check if we are configured in endpoint or root complex mode,
- * this is a fixed pin setting that applies to all PCIe ports.
- */
- port->endpoint = test_mode_pin(MODE_PIN11);
-
- /*
- * Setup clocks, needed both for PHY and PCIe registers.
- */
- ret = pcie_clk_init(port);
- if (unlikely(ret < 0)) {
- pr_err("clock initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = phy_init(port);
- if (unlikely(ret < 0)) {
- pr_err("phy initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- ret = pcie_init(port);
- if (unlikely(ret < 0)) {
- pr_err("core initialization failed for port#%d\n",
- port->index);
- return;
- }
-
- /* In the interest of preserving device ordering, synchronize */
- async_synchronize_cookie(cookie);
-
- register_pci_controller(port->hose);
-}
-
-static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
- .core_init = sh7786_pcie_core_init,
- .port_init_hw = sh7786_pcie_init_hw,
-};
-
-static int __init sh7786_pcie_init(void)
-{
- struct clk *platclk;
- u32 mm_sel;
- int i;
-
- printk(KERN_NOTICE "PCI: Starting initialization.\n");
-
- sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
-
- nr_ports = sh7786_pcie_hwops->core_init();
- BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
-
- if (unlikely(nr_ports == 0))
- return -ENODEV;
-
- sh7786_pcie_ports = kcalloc(nr_ports, sizeof(struct sh7786_pcie_port),
- GFP_KERNEL);
- if (unlikely(!sh7786_pcie_ports))
- return -ENOMEM;
-
- /*
- * Fetch any optional platform clock associated with this block.
- *
- * This is a rather nasty hack for boards with spec-mocking FPGAs
- * that have a secondary set of clocks outside of the on-chip
- * ones that need to be accounted for before there is any chance
- * of touching the existing MSTP bits or CPG clocks.
- */
- platclk = clk_get(NULL, "pcie_plat_clk");
- if (IS_ERR(platclk)) {
- /* Sane hardware should probably get a WARN_ON.. */
- platclk = NULL;
- }
-
- clk_enable(platclk);
-
- mm_sel = sh7786_mm_sel();
-
- /*
- * Depending on the MMSELR register value, the PCIe0 MEM 1
- * area may not be available. See Table 13.11 of the SH7786
- * datasheet.
- */
- if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6)
- sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED;
-
- printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
-
- for (i = 0; i < nr_ports; i++) {
- struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
-
- port->index = i;
- port->hose = sh7786_pci_channels + i;
- port->hose->io_map_base = port->hose->resources[0].start;
-
- async_schedule(sh7786_pcie_hwops->port_init_hw, port);
- }
-
- async_synchronize_full();
-
- return 0;
-}
-arch_initcall(sh7786_pcie_init);
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
deleted file mode 100644
index ffe383681a0bd2..00000000000000
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ /dev/null
@@ -1,577 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 PCI-Express controller definitions.
- *
- * Copyright (C) 2008, 2009 Renesas Technology Corp.
- * All rights reserved.
- */
-#ifndef __PCI_SH7786_H
-#define __PCI_SH7786_H
-
-/* PCIe bus-0(x4) on SH7786 */ // Rev1.171
-#define SH4A_PCIE_SPW_BASE 0xFE000000 /* spw config address for controller 0 */
-#define SH4A_PCIE_SPW_BASE1 0xFE200000 /* spw config address for controller 1 (Rev1.14)*/
-#define SH4A_PCIE_SPW_BASE2 0xFCC00000 /* spw config address for controller 2 (Rev1.171)*/
-#define SH4A_PCIE_SPW_BASE_LEN 0x00080000
-
-#define SH4A_PCI_CNFG_BASE 0xFE040000 /* pci config address for controller 0 */
-#define SH4A_PCI_CNFG_BASE1 0xFE240000 /* pci config address for controller 1 (Rev1.14)*/
-#define SH4A_PCI_CNFG_BASE2 0xFCC40000 /* pci config address for controller 2 (Rev1.171)*/
-#define SH4A_PCI_CNFG_BASE_LEN 0x00040000
-
-#define SH4A_PCIPIO_ADDR_OFFSET 0x000001c0 /* offset to pci config_address */
-#define SH4A_PCIPIO_DATA_OFFSET 0x00000220 /* offset to pci config_data */
-
-/*
- * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
- * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
- */
-
-/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
-#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
-
-/* SPVCR0 */
-#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
-#define BITS_TOP_MB (24)
-#define MASK_TOP_MB (0xff<<BITS_TOP_MB)
-#define BITS_BOT_MB (16)
-#define MASK_BOT_MB (0xff<<BITS_BOT_MB)
-#define BITS_VC_ID (0)
-#define MASK_VC_ID (0xffff<<BITS_VC_ID)
-
-/* SPVCR1 */
-#define SH4A_PCIEVCR1 (0x000004) /* R - 0x0000 0000 32*/
-#define BITS_BADOPC (5) /* 5 BADOPC 0 R/W */
-#define MASK_BADOPC (1<<BITS_BADOPC)
-#define BITS_BADDEST (4) /*4 BADDEST 0 R/W */
-#define MASK_BADDEST (1<<BITS_BADDEST)
-#define BITS_UNSOLRESP (3) /* 3 UNSOLRESP 0 R/W */
-#define MASK_UNSOLRESP (1<<BITS_UNSOLRESP)
-#define BITS_ERRSNT (1) /* 1 ERRSNT 0 */
-#define MASK_ERRSNT (1<<BITS_ERRSNT)
-#define BITS_ERRRCV (0) /* 0 ERRRCV 0 */
-#define MASK_ERRRCV (1<<BITS_ERRRCV)
-
-/* PCIEENBLR */
-#define SH4A_PCIEENBLR (0x000008) /* R/W - 0x0000 0001 32 */
-
-/* PCIEECR */
-#define SH4A_PCIEECR (0x00000C) /* R/W - 0x0000 0000 32 */
-#define BITS_ENBL (0) /* 0 ENBL 0 R/W */
-#define MASK_ENBL (1<<BITS_ENBL)
-
-/* PCIEPAR */
-#define SH4A_PCIEPAR (0x000010) /* R/W - 0x0000 0000 32 */
-#define BITS_BN (24)
-#define MASK_BN (0xff<<BITS_BN)
-#define BITS_DN (19)
-#define MASK_DN (0x1f<<BITS_DN)
-#define BITS_FN (16)
-#define MASK_FN (0x7<<BITS_FN)
-#define BITS_EREGNO (8)
-#define MASK_EREGNO (0xff<<BITS_EREGNO)
-#define BITS_REGNO (2)
-#define MASK_REGNO (0x3f<<BITS_REGNO)
-
-/* PCIEPCTLR */
-#define SH4A_PCIEPCTLR (0x000018) /* R/W - 0x0000 0000 32 */
-#define BITS_CCIE (31) /* 31 CCIE */
-#define MASK_CCIE (1<<BITS_CCIE)
-#define BITS_TYPE (8)
-#define MASK_TYPE (1<<BITS_TYPE)
-#define BITS_C_VC (0)
-#define MASK_C_VC (1<<BITS_C_VC)
-
-/* PCIEPDR */
-#define SH4A_PCIEPDR (0x000020) /* R/W - 0x0000 0000 32 */
-#define BITS_PDR (0)
-#define MASK_PDR (0xffffffff<<BITS_PDR)
-
-/* PCIEMSGALR */
-#define SH4A_PCIEMSGALR (0x000030) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRL (0)
-#define MASK_MSGADRL (0xffffffff<<BITS_MSGADRL)
-
-/* PCIEMSGAHR */
-#define SH4A_PCIEMSGAHR (0x000034) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGADRH (0)
-#define MASK_MSGADRH (0xffffffff<<BITS_MSGADRH)
-
-/* PCIEMSGCTLR */
-#define SH4A_PCIEMSGCTLR (0x000038) /* R/W - 0x0000 0000 32 */
-#define BITS_MSGIE (31)
-#define MASK_MSGIE (1<<BITS_MSGIE)
-#define BITS_MROUTE (16)
-#define MASK_MROUTE (0x7<<BITS_MROUTE)
-#define BITS_MCODE (8)
-#define MASK_MCODE (0xff<<BITS_MCODE)
-#define BITS_M_VC (0)
-#define MASK_M_VC (1<<BITS_M_VC)
-
-/* PCIEMSG */
-#define SH4A_PCIEMSG (0x000040) /* W - - 32 */
-#define BITS_MDATA (0)
-#define MASK_MDATA (0xffffffff<<BITS_MDATA)
-
-/* PCIEUNLOCKCR */
-#define SH4A_PCIEUNLOCKCR (0x000048) /* R/W - 0x0000 0000 32 */
-
-/* PCIEIDR */
-#define SH4A_PCIEIDR (0x000060) /* R/W - 0x0101 1101 32 */
-
-/* PCIEDBGCTLR */
-#define SH4A_PCIEDBGCTLR (0x000100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEINTXR */
-#define SH4A_PCIEINTXR (0x004000) /* R/W - 0x0000 0000 32 */
-
-/* PCIERMSGR */
-#define SH4A_PCIERMSGR (0x004010) /* R/W - 0x0000 0000 32 */
-
-/* PCIERSTR */
-#define SH4A_PCIERSTR(x) (0x008000 + ((x) * 0x4)) /* R/W - 0x0000 0000 32 */
-
-/* PCIESRSTR */
-#define SH4A_PCIESRSTR (0x008040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYCTLR */
-#define SH4A_PCIEPHYCTLR (0x010000) /* R/W - 0x0000 0000 32 */
-#define BITS_CKE (0)
-#define MASK_CKE (1<<BITS_CKE)
-
-/* PCIERMSGIER */
-#define SH4A_PCIERMSGIER (0x004040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYADRR */
-#define SH4A_PCIEPHYADRR (0x010004) /* R/W - 0x0000 0000 32 */
-#define BITS_ACK (24) // Rev1.171
-#define MASK_ACK (1<<BITS_ACK) // Rev1.171
-#define BITS_CMD (16) // Rev1.171
-#define MASK_CMD (0x03<<BITS_CMD) // Rev1.171
-#define BITS_LANE (8)
-#define MASK_LANE (0x0f<<BITS_LANE)
-#define BITS_ADR (0)
-#define MASK_ADR (0xff<<BITS_ADR)
-
-/* PCIEPHYDINR */ // Rev1.171 start.
-#define SH4A_PCIEPHYDINR (0x010008) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYDOUTR */
-#define SH4A_PCIEPHYDOUTR (0x01000C) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPHYSR */
-#define SH4A_PCIEPHYSR (0x010010) /* R/W - 0x0000 0000 32 */ // Rev1.171 end.
-
-/* PCIEPHYDATAR */
-#define SH4A_PCIEPHYDATAR (0x00008) /* R/W - 0xxxxx xxxx 32 */
-#define BITS_DATA (0)
-#define MASK_DATA (0xffffffff<<BITS_DATA)
-
-/* PCIETCTLR */
-#define SH4A_PCIETCTLR (0x020000) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CFINT (0)
-#define MASK_CFINT (1<<BITS_CFINT)
-
-/* PCIETSTR */
-#define SH4A_PCIETSTR (0x020004) /* R 0x0000 0000 32 */
-
-/* PCIEINTR */
-#define SH4A_PCIEINTR (0x020008) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEINTER */
-#define SH4A_PCIEINTER (0x02000C) /* R/W R/W 0x0000 0000 32 */
-#define BITS_INT_RX_ERP (31)
-#define MASK_INT_RX_ERP (1<<BITS_INT_RX_ERP)
-#define BITS_INT_RX_VCX_Posted (30)
-#define MASK_INT_RX_VCX_Posted (1<<BITS_INT_RX_VCX_Posted)
-#define BITS_INT_RX_VCX_NonPosted (29)
-#define MASK_INT_RX_VCX_NonPosted (1<<BITS_INT_RX_VCX_NonPosted)
-#define BITS_INT_RX_VCX_CPL (28)
-#define MASK_INT_RX_VCX_CPL (1<<BITS_INT_RX_VCX_CPL)
-#define BITS_INT_TX_VCX_Posted (26)
-#define MASK_INT_TX_VCX_Posted (1<<BITS_INT_TX_VCX_Posted)
-#define BITS_INT_TX_VCX_NonPosted (25)
-#define MASK_INT_TX_VCX_NonPosted (1<<BITS_INT_TX_VCX_NonPosted)
-#define BITS_INT_TX_VCX_CPL (24)
-#define MASK_INT_TX_VCX_CPL (1<<BITS_INT_TX_VCX_CPL)
-#define BITS_INT_RX_VC0_Posted (22)
-#define MASK_INT_RX_VC0_Posted (1<<BITS_INT_RX_VC0_Posted)
-#define BITS_INT_RX_VC0_NonPosted (21)
-#define MASK_INT_RX_VC0_NonPosted (1<<BITS_INT_RX_VC0_NonPosted)
-#define BITS_INT_RX_VC0_CPL (20)
-#define MASK_INT_RX_VC0_CPL (1<<BITS_INT_RX_VC0_CPL)
-#define BITS_INT_TX_VC0_Posted (18)
-#define MASK_INT_TX_VC0_Posted (1<<BITS_INT_TX_VC0_Posted)
-#define BITS_INT_TX_VC0_NonPosted (17)
-#define MASK_INT_TX_VC0_NonPosted (1<<BITS_INT_TX_VC0_NonPosted)
-#define BITS_INT_TX_VC0_CPL (16)
-#define MASK_INT_TX_VC0_CPL (1<<BITS_INT_TX_VC0_CPL)
-#define BITS_INT_RX_CTRL (15)
-#define MASK_INT_RX_CTRL (1<<BITS_INT_RX_CTRL)
-#define BITS_INT_TX_CTRL (14)
-#define MASK_INT_TX_CTRL (1<<BITS_INT_TX_CTRL)
-#define BITS_INTTL (11)
-#define MASK_INTTL (1<<BITS_INTTL)
-#define BITS_INTDL (10)
-#define MASK_INTDL (1<<BITS_INTDL)
-#define BITS_INTMAC (9)
-#define MASK_INTMAC (1<<BITS_INTMAC)
-#define BITS_INTPM (8)
-#define MASK_INTPM (1<<BITS_INTPM)
-
-/* PCIEEH0R */
-#define SH4A_PCIEEHR(x) (0x020010 + ((x) * 0x4)) /* R - 0x0000 0000 32 */
-
-/* PCIEAIR */
-#define SH4A_PCIEAIR (SH4A_PCIE_BASE + 0x020010) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIECIR */
-#define SH4A_PCIECIR (SH4A_PCIE_BASE) /* R/W R/W 0xxxxx xxxx 32 */
-
-/* PCIEERRFR */ // Rev1.18
-#define SH4A_PCIEERRFR (0x020020) /* R/W R/W 0xxxxx xxxx 32 */ // Rev1.18
-
-/* PCIEERRFER */
-#define SH4A_PCIEERRFER (0x020024) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEERRFR2 */
-#define SH4A_PCIEERRFR2 (0x020028) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEMSIR */
-#define SH4A_PCIEMSIR (0x020040) /* R/W - 0x0000 0000 32 */
-
-/* PCIEMSIFR */
-#define SH4A_PCIEMSIFR (0x020044) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPWRCTLR */
-#define SH4A_PCIEPWRCTLR (0x020100) /* R/W - 0x0000 0000 32 */
-
-/* PCIEPCCTLR */
-#define SH4A_PCIEPCCTLR (0x020180) /* R/W - 0x0000 0000 32 */
-
- // Rev1.18
-/* PCIELAR0 */
-#define SH4A_PCIELAR0 (0x020200) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LARn (20)
-#define MASK_LARn (0xfff<<BITS_LARn)
-
-#define SH4A_PCIE_020204 (0x020204) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIELAMR0 */
-#define SH4A_PCIELAMR0 (0x020208) /* R/W R/W 0x0000 0000 32 */
-#define BITS_LAMRn (20)
-#define MASK_LAMRn (0x1ff<<BITS_LAMRn)
-#define BITS_LAREn (0)
-#define MASK_LAREn (0x1<<BITS_LAREn)
-
-/* PCIECSCR0 */
-#define SH4A_PCIECSCR0 (0x020210) /* R/W R/W 0x0000 0000 32 */
-#define BITS_RANGE (2)
-#define MASK_RANGE (0x7<<BITS_RANGE)
-#define BITS_SNPMD (0)
-#define MASK_SNPMD (0x3<<BITS_SNPMD)
-
-/* PCIECSAR0 */
-#define SH4A_PCIECSAR0 (0x020214) /* R/W R/W 0x0000 0000 32 */
-#define BITS_CSADR (0)
-#define MASK_CSADR (0xffffffff<<BITS_CSADR)
-
-/* PCIESTCTLR0 */
-#define SH4A_PCIESTCTLR0 (0x020218) /* R/W R/W 0x0000 0000 32 */
-#define BITS_SHPRI (8)
-#define MASK_SHPRI (0x0f<<BITS_SHPRI)
-
-#define SH4A_PCIE_020224 (0x020224) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR1 (0x020220) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR1 (0x020228) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR1 (0x020230) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR1 (0x020234) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR1 (0x020238) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR2 (0x020240) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020244 (0x020244) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR2 (0x020248) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR2 (0x020250) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR2 (0x020254) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR2 (0x020258) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR3 (0x020260) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020264 (0x020264) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR3 (0x020268) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR3 (0x020270) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR3 (0x020274) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR3 (0x020278) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR4 (0x020280) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_020284 (0x020284) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR4 (0x020288) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR4 (0x020290) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR4 (0x020294) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR4 (0x020298) /* R/W R/W 0x0000 0000 32 */
-
-#define SH4A_PCIELAR5 (0x0202A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIE_0202A4 (0x0202A4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIELAMR5 (0x0202A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSCR5 (0x0202B0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */
-
-/* PCIEPARL */
-#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAL (18)
-#define MASK_PAL (0x3fff<<BITS_PAL)
-
-/* PCIEPARH */
-#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAH (0)
-#define MASK_PAH (0xffffffff<<BITS_PAH)
-
-/* PCIEPAMR */
-#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
-#define BITS_PAM (18)
-#define MASK_PAM (0x3fff<<BITS_PAM)
-
-/* PCIEPTCTLR */
-#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20))
-#define BITS_PARE (31)
-#define MASK_PARE (0x1<<BITS_PARE)
-#define BITS_TC (20)
-#define MASK_TC (0x7<<BITS_TC)
-#define BITS_T_VC (16)
-#define MASK_T_VC (0x1<<BITS_T_VC)
-#define BITS_LOCK (12)
-#define MASK_LOCK (0x1<<BITS_LOCK)
-#define BITS_SPC (8)
-#define MASK_SPC (0x1<<BITS_SPC)
-
-#define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR0 (0x021108) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR0 (0x02110C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR0 (0x021110) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR0 (0x021114) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR0 (0x021118) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR0 (0x02111C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR0 (0x021120) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R0 (0x021124) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR0 (0x021128) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR0 (0x02112C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR1 (0x021140) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR1 (0x021144) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR1 (0x021148) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR1 (0x02114C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR1 (0x021150) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR1 (0x021154) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR1 (0x021158) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR1 (0x02115C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR1 (0x021160) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R1 (0x021164) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR1 (0x021168) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR1 (0x02116C) /* R/W - 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR2 (0x021180) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR2 (0x021184) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR2 (0x021188) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR2 (0x02118C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR2 (0x021190) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR2 (0x021194) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR2 (0x021198) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR2 (0x02119C) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR2 (0x0211A0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R2 (0x0211A4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR2 (0x0211A8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAR3 (0x0211C0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSAHR3 (0x0211C4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAR3 (0x0211C8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMDAHR3 (0x0211CC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMBCNTR3 (0x0211D0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSBCNTR3 (0x0211D4) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMSTRR3 (0x0211D8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCAR3 (0x0211DC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCCR3 (0x0211E0) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCC2R3 (0x0211E4) /* R/W R/W 0x0000 0000 - */
-#define SH4A_PCIEDMCCCR3 (0x0211E8) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEDMCHSR3 (0x0211EC) /* R/W R/W 0x0000 0000 32 */
-#define SH4A_PCIEPCICONF0 (0x040000) /* R R - 8/16/32 */
-#define SH4A_PCIEPCICONF1 (0x040004) /* R/W R/W 0x0008 0000 8/16/32 */
-#define SH4A_PCIEPCICONF2 (0x040008) /* R/W R/W 0xFF00 0000 8/16/32 */
-#define SH4A_PCIEPCICONF3 (0x04000C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF4 (0x040010) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF5 (0x040014) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF6 (0x040018) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF7 (0x04001C) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF8 (0x040020) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF9 (0x040024) /* - R/W - 8/16/32 */
-#define SH4A_PCIEPCICONF10 (0x040028) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF11 (0x04002C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF12 (0x040030) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF13 (0x040034) /* R/W R/W 0x0000 0040 8/16/32 */
-#define SH4A_PCIEPCICONF14 (0x040038) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEPCICONF15 (0x04003C) /* R/W R/W 0x0000 00FF 8/16/32 */
-#define SH4A_PCIEPMCAP0 (0x040040) /* R/W R 0x0003 5001 8/16/32 */
-#define SH4A_PCIEPMCAP1 (0x040044) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP0 (0x040050) /* R/W R/W 0x0180 7005 8/16/32 */
-#define SH4A_PCIEMSICAP1 (0x040054) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP2 (0x040058) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP3 (0x04005C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP4 (0x040060) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEMSICAP5 (0x040064) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP0 (0x040070) /* R/W R/W 0x0001 0010 8/16/32 */
-#define SH4A_PCIEEXPCAP1 (0x040074) /* R/W R 0x0000 0005 8/16/32 */
-#define SH4A_PCIEEXPCAP2 (0x040078) /* R/W R/W 0x0000 0801 8/16/32 */
-#define SH4A_PCIEEXPCAP3 (0x04007C) /* R/W R 0x0003 F421 8/16/32 */
-#define SH4A_PCIEEXPCAP4 (0x040080) /* R/W R/W 0x0041 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP5 (0x040084) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP6 (0x040088) /* R/W R/W 0x0000 03C0 8/16/32 */
-#define SH4A_PCIEEXPCAP7 (0x04008C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEEXPCAP8 (0x040090) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP0 (0x040100) /* R/W R 0x1B01 0002 8/16/32 */
-#define SH4A_PCIEVCCAP1 (0x040104) /* R R 0x0000 0001 8/16/32 */
-#define SH4A_PCIEVCCAP2 (0x040108) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP3 (0x04010C) /* R R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP4 (0x040110) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP5 (0x040114) /* R/W R/W 0x8000 00FF 8/16/32 */
-#define SH4A_PCIEVCCAP6 (0x040118) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIEVCCAP7 (0x04011C) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP8 (0x040120) /* R/W R/W 0x0000 0000 8/16/32 */
-#define SH4A_PCIEVCCAP9 (0x040124) /* R/W R 0x0002 0000 8/16/32 */
-#define SH4A_PCIENUMCAP0 (0x0001B0) /* RW R 0x0001 0003 8/16/32 */
-#define SH4A_PCIENUMCAP1 (0x0001B4) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIENUMCAP2 (0x0001B8) /* R R 0x0000 0000 8/16/32 */
-#define SH4A_PCIEIDSETR0 (0x041000) /* R/W R 0x0000 FFFF 16/32 */
-#define SH4A_PCIEIDSETR1 (0x041004) /* R/W R 0xFF00 0000 16/32 */
-#define SH4A_PCIEBAR0SETR (0x041008) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR1SETR (0x04100C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR2SETR (0x041010) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR3SETR (0x041014) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR4SETR (0x041018) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEBAR5SETR (0x04101C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECISSETR (0x041020) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEIDSETR2 (0x041024) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEEROMSETR (0x041028) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR0 (0x04102C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDSERSETR1 (0x041030) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIECTLR (0x041040) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLSR (0x041044) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIETLCTLR (0x041048) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLSR (0x04104C) /* R/W1C R 0x4003 0000 16/32 */
-#define SH4A_PCIEDLCTLR (0x041050) /* R R 0x0000 0000 16/32 */
-#define SH4A_PCIEMACSR (0x041054) /* R/W1C R 0x0041 0000 16/32 */
-#define SH4A_PCIEMACCTLR (0x041058) /* R/W R 0x0000 0000 16/32 */
-#define PCIEMACCTLR_SCR_DIS (1 << 27) /* scramble disable */
-#define SH4A_PCIEPMSTR (0x04105C) /* R/W1C R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMCTLR (0x041060) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETLINTENR (0x041064) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEDLINTENR (0x041068) /* R/W R 0x0000 0000 16/32 */
-#define PCIEDLINTENR_DLL_ACT_ENABLE (1 << 31) /* DL active irq */
-#define SH4A_PCIEMACINTENR (0x04106C) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIEPMINTENR (0x041070) /* R/W R 0x0000 0000 16/32 */
-#define SH4A_PCIETXDCTLR (0x044000) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXCTLR (0x044020) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXSR (0x044028) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0DCTLR (0x044100) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVC0SR (0x044108) /* R/W - H'00888000_00000000 32/64 */
-#define SH4A_PCIEVC0PDTXR (0x044110) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHTXR (0x044118) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDTXR (0x044120) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHTXR (0x044128) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDTXR (0x044130) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHTXR (0x044138) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXDCTLR (0x044200) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIETXVCXSR (0x044208) /* R/W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDTXR (0x044210) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHTXR (0x044218) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDTXR (0x044220) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHTXR (0x044228) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDTXR (0x044230) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHTXR (0x044238) /* W - H'00000000_00000000 32/64 */
-#define SH4A_PCIERDCTLR (0x046000) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPCTLR (0x046008) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPHR (0x046010) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEERPERR (0x046018) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0DCTLR (0x046100) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVC0SR (0x046108) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PDRXR (0x046140) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PHRXR (0x046148) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0PERR (0x046150) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPDRXR (0x046158) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPHRXR (0x046160) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0NPERR (0x046168) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CDRXR (0x046170) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CHRXR (0x046178) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVC0CERR (0x046180) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXDCTLR (0x046200) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIERXVCXSR (0x046208) /* RW - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPDRXR (0x046240) /* R - H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPHRXR (0x046248) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXPERR (0x046250) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPDRXR (0x046258) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPHRXR (0x046260) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXNPERR (0x046268) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCDRXR (0x046270) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCHRXR (0x046278) /* R H'00000000_00000000 32/64 */
-#define SH4A_PCIEVCXCERR (0x046280) /* R H'00000000_00000000 32/64 */
-
-/* SSI Register Definition for MSI WORK AROUND --hamada */
-#define SH4A_PCI_SSI_BASE 0xFFE00000 /* spw config address */
-#define SH4A_PCI_SSI_BASE_LEN 0x00100000 /* 1MB */
-
-#define SH4A_SSICR0 (0x000000)
-#define SH4A_SSICR1 (0x010000)
-#define SH4A_SSICR2 (0x020000)
-#define SH4A_SSICR3 (0x030000)
-
-#define PCI_REG(x) ((x) + 0x40000)
-
-static inline void
-pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
-{
- __raw_writel(val, chan->reg_base + reg);
-}
-
-static inline unsigned long
-pci_read_reg(struct pci_channel *chan, unsigned long reg)
-{
- return __raw_readl(chan->reg_base + reg);
-}
-
-#endif /* __PCI_SH7786_H */
diff --git a/arch/sh/drivers/platform_early.c b/arch/sh/drivers/platform_early.c
deleted file mode 100644
index 143747c45206fe..00000000000000
--- a/arch/sh/drivers/platform_early.c
+++ /dev/null
@@ -1,340 +0,0 @@
-// SPDX--License-Identifier: GPL-2.0
-
-#include <asm/platform_early.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pm.h>
-
-static __initdata LIST_HEAD(sh_early_platform_driver_list);
-static __initdata LIST_HEAD(sh_early_platform_device_list);
-
-static const struct platform_device_id *
-platform_match_id(const struct platform_device_id *id,
- struct platform_device *pdev)
-{
- while (id->name[0]) {
- if (strcmp(pdev->name, id->name) == 0) {
- pdev->id_entry = id;
- return id;
- }
- id++;
- }
- return NULL;
-}
-
-static int platform_match(struct device *dev, struct device_driver *drv)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct platform_driver *pdrv = to_platform_driver(drv);
-
- /* When driver_override is set, only bind to the matching driver */
- if (pdev->driver_override)
- return !strcmp(pdev->driver_override, drv->name);
-
- /* Then try to match against the id table */
- if (pdrv->id_table)
- return platform_match_id(pdrv->id_table, pdev) != NULL;
-
- /* fall-back to driver name match */
- return (strcmp(pdev->name, drv->name) == 0);
-}
-
-#ifdef CONFIG_PM
-static void device_pm_init_common(struct device *dev)
-{
- if (!dev->power.early_init) {
- spin_lock_init(&dev->power.lock);
- dev->power.qos = NULL;
- dev->power.early_init = true;
- }
-}
-
-static void pm_runtime_early_init(struct device *dev)
-{
- dev->power.disable_depth = 1;
- device_pm_init_common(dev);
-}
-#else
-static void pm_runtime_early_init(struct device *dev) {}
-#endif
-
-/**
- * sh_early_platform_driver_register - register early platform driver
- * @epdrv: sh_early_platform driver structure
- * @buf: string passed from early_param()
- *
- * Helper function for sh_early_platform_init() / sh_early_platform_init_buffer()
- */
-int __init sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf)
-{
- char *tmp;
- int n;
-
- /* Simply add the driver to the end of the global list.
- * Drivers will by default be put on the list in compiled-in order.
- */
- if (!epdrv->list.next) {
- INIT_LIST_HEAD(&epdrv->list);
- list_add_tail(&epdrv->list, &sh_early_platform_driver_list);
- }
-
- /* If the user has specified device then make sure the driver
- * gets prioritized. The driver of the last device specified on
- * command line will be put first on the list.
- */
- n = strlen(epdrv->pdrv->driver.name);
- if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
- list_move(&epdrv->list, &sh_early_platform_driver_list);
-
- /* Allow passing parameters after device name */
- if (buf[n] == '\0' || buf[n] == ',')
- epdrv->requested_id = -1;
- else {
- epdrv->requested_id = simple_strtoul(&buf[n + 1],
- &tmp, 10);
-
- if (buf[n] != '.' || (tmp == &buf[n + 1])) {
- epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
- n = 0;
- } else
- n += strcspn(&buf[n + 1], ",") + 1;
- }
-
- if (buf[n] == ',')
- n++;
-
- if (epdrv->bufsize) {
- memcpy(epdrv->buffer, &buf[n],
- min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1));
- epdrv->buffer[epdrv->bufsize - 1] = '\0';
- }
- }
-
- return 0;
-}
-
-/**
- * sh_early_platform_add_devices - adds a number of early platform devices
- * @devs: array of early platform devices to add
- * @num: number of early platform devices in array
- *
- * Used by early architecture code to register early platform devices and
- * their platform data.
- */
-void __init sh_early_platform_add_devices(struct platform_device **devs, int num)
-{
- struct device *dev;
- int i;
-
- /* simply add the devices to list */
- for (i = 0; i < num; i++) {
- dev = &devs[i]->dev;
-
- if (!dev->devres_head.next) {
- pm_runtime_early_init(dev);
- INIT_LIST_HEAD(&dev->devres_head);
- list_add_tail(&dev->devres_head,
- &sh_early_platform_device_list);
- }
- }
-}
-
-/**
- * sh_early_platform_driver_register_all - register early platform drivers
- * @class_str: string to identify early platform driver class
- *
- * Used by architecture code to register all early platform drivers
- * for a certain class. If omitted then only early platform drivers
- * with matching kernel command line class parameters will be registered.
- */
-void __init sh_early_platform_driver_register_all(char *class_str)
-{
- /* The "class_str" parameter may or may not be present on the kernel
- * command line. If it is present then there may be more than one
- * matching parameter.
- *
- * Since we register our early platform drivers using early_param()
- * we need to make sure that they also get registered in the case
- * when the parameter is missing from the kernel command line.
- *
- * We use parse_early_options() to make sure the early_param() gets
- * called at least once. The early_param() may be called more than
- * once since the name of the preferred device may be specified on
- * the kernel command line. sh_early_platform_driver_register() handles
- * this case for us.
- */
- parse_early_options(class_str);
-}
-
-/**
- * sh_early_platform_match - find early platform device matching driver
- * @epdrv: early platform driver structure
- * @id: id to match against
- */
-static struct platform_device * __init
-sh_early_platform_match(struct sh_early_platform_driver *epdrv, int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id == id)
- return pd;
-
- return NULL;
-}
-
-/**
- * sh_early_platform_left - check if early platform driver has matching devices
- * @epdrv: early platform driver structure
- * @id: return true if id or above exists
- */
-static int __init sh_early_platform_left(struct sh_early_platform_driver *epdrv,
- int id)
-{
- struct platform_device *pd;
-
- list_for_each_entry(pd, &sh_early_platform_device_list, dev.devres_head)
- if (platform_match(&pd->dev, &epdrv->pdrv->driver))
- if (pd->id >= id)
- return 1;
-
- return 0;
-}
-
-/**
- * sh_early_platform_driver_probe_id - probe drivers matching class_str and id
- * @class_str: string to identify early platform driver class
- * @id: id to match against
- * @nr_probe: number of platform devices to successfully probe before exiting
- */
-static int __init sh_early_platform_driver_probe_id(char *class_str,
- int id,
- int nr_probe)
-{
- struct sh_early_platform_driver *epdrv;
- struct platform_device *match;
- int match_id;
- int n = 0;
- int left = 0;
-
- list_for_each_entry(epdrv, &sh_early_platform_driver_list, list) {
- /* only use drivers matching our class_str */
- if (strcmp(class_str, epdrv->class_str))
- continue;
-
- if (id == -2) {
- match_id = epdrv->requested_id;
- left = 1;
-
- } else {
- match_id = id;
- left += sh_early_platform_left(epdrv, id);
-
- /* skip requested id */
- switch (epdrv->requested_id) {
- case EARLY_PLATFORM_ID_ERROR:
- case EARLY_PLATFORM_ID_UNSET:
- break;
- default:
- if (epdrv->requested_id == id)
- match_id = EARLY_PLATFORM_ID_UNSET;
- }
- }
-
- switch (match_id) {
- case EARLY_PLATFORM_ID_ERROR:
- pr_warn("%s: unable to parse %s parameter\n",
- class_str, epdrv->pdrv->driver.name);
- fallthrough;
- case EARLY_PLATFORM_ID_UNSET:
- match = NULL;
- break;
- default:
- match = sh_early_platform_match(epdrv, match_id);
- }
-
- if (match) {
- /*
- * Set up a sensible init_name to enable
- * dev_name() and others to be used before the
- * rest of the driver core is initialized.
- */
- if (!match->dev.init_name && slab_is_available()) {
- if (match->id != -1)
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s.%d",
- match->name,
- match->id);
- else
- match->dev.init_name =
- kasprintf(GFP_KERNEL, "%s",
- match->name);
-
- if (!match->dev.init_name)
- return -ENOMEM;
- }
-
- if (epdrv->pdrv->probe(match))
- pr_warn("%s: unable to probe %s early.\n",
- class_str, match->name);
- else
- n++;
- }
-
- if (n >= nr_probe)
- break;
- }
-
- if (left)
- return n;
- else
- return -ENODEV;
-}
-
-/**
- * sh_early_platform_driver_probe - probe a class of registered drivers
- * @class_str: string to identify early platform driver class
- * @nr_probe: number of platform devices to successfully probe before exiting
- * @user_only: only probe user specified early platform devices
- *
- * Used by architecture code to probe registered early platform drivers
- * within a certain class. For probe to happen a registered early platform
- * device matching a registered early platform driver is needed.
- */
-int __init sh_early_platform_driver_probe(char *class_str,
- int nr_probe,
- int user_only)
-{
- int k, n, i;
-
- n = 0;
- for (i = -2; n < nr_probe; i++) {
- k = sh_early_platform_driver_probe_id(class_str, i, nr_probe - n);
-
- if (k < 0)
- break;
-
- n += k;
-
- if (user_only)
- break;
- }
-
- return n;
-}
-
-/**
- * early_platform_cleanup - clean up early platform code
- */
-void __init early_platform_cleanup(void)
-{
- struct platform_device *pd, *pd2;
-
- /* clean up the devres list used to chain devices */
- list_for_each_entry_safe(pd, pd2, &sh_early_platform_device_list,
- dev.devres_head) {
- list_del(&pd->dev.devres_head);
- memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
- }
-}
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
deleted file mode 100644
index c95f48ff3f6fb4..00000000000000
--- a/arch/sh/drivers/push-switch.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic push-switch framework
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/push-switch.h>
-
-#define DRV_NAME "push-switch"
-#define DRV_VERSION "0.1.1"
-
-static ssize_t switch_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct push_switch_platform_info *psw_info = dev->platform_data;
- return sprintf(buf, "%s\n", psw_info->name);
-}
-static DEVICE_ATTR_RO(switch);
-
-static void switch_timer(struct timer_list *t)
-{
- struct push_switch *psw = from_timer(psw, t, debounce);
-
- schedule_work(&psw->work);
-}
-
-static void switch_work_handler(struct work_struct *work)
-{
- struct push_switch *psw = container_of(work, struct push_switch, work);
- struct platform_device *pdev = psw->pdev;
-
- psw->state = 0;
-
- kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE);
-}
-
-static int switch_drv_probe(struct platform_device *pdev)
-{
- struct push_switch_platform_info *psw_info;
- struct push_switch *psw;
- int ret, irq;
-
- psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL);
- if (unlikely(!psw))
- return -ENOMEM;
-
- irq = platform_get_irq(pdev, 0);
- if (unlikely(irq < 0)) {
- ret = -ENODEV;
- goto err;
- }
-
- psw_info = pdev->dev.platform_data;
- BUG_ON(!psw_info);
-
- ret = request_irq(irq, psw_info->irq_handler,
- psw_info->irq_flags,
- psw_info->name ? psw_info->name : DRV_NAME, pdev);
- if (unlikely(ret < 0))
- goto err;
-
- if (psw_info->name) {
- ret = device_create_file(&pdev->dev, &dev_attr_switch);
- if (unlikely(ret)) {
- dev_err(&pdev->dev, "Failed creating device attrs\n");
- ret = -EINVAL;
- goto err_irq;
- }
- }
-
- INIT_WORK(&psw->work, switch_work_handler);
- timer_setup(&psw->debounce, switch_timer, 0);
-
- /* Workqueue API brain-damage */
- psw->pdev = pdev;
-
- platform_set_drvdata(pdev, psw);
-
- return 0;
-
-err_irq:
- free_irq(irq, pdev);
-err:
- kfree(psw);
- return ret;
-}
-
-static int switch_drv_remove(struct platform_device *pdev)
-{
- struct push_switch *psw = platform_get_drvdata(pdev);
- struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
- int irq = platform_get_irq(pdev, 0);
-
- if (psw_info->name)
- device_remove_file(&pdev->dev, &dev_attr_switch);
-
- platform_set_drvdata(pdev, NULL);
- flush_work(&psw->work);
- timer_shutdown_sync(&psw->debounce);
- free_irq(irq, pdev);
-
- kfree(psw);
-
- return 0;
-}
-
-static struct platform_driver switch_driver = {
- .probe = switch_drv_probe,
- .remove = switch_drv_remove,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-static int __init switch_init(void)
-{
- printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
- return platform_driver_register(&switch_driver);
-}
-
-static void __exit switch_exit(void)
-{
- platform_driver_unregister(&switch_driver);
-}
-module_init(switch_init);
-module_exit(switch_exit);
-
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
deleted file mode 100644
index aa6e3267c055d9..00000000000000
--- a/arch/sh/drivers/superhyway/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperHyway specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o
-
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
deleted file mode 100644
index 490142274e3b0a..00000000000000
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/superhyway/ops-sh4-202.c
- *
- * SuperHyway bus support for SH4-202
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000)
-#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000)
-#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000)
-#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000)
-
-#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000)
-#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000)
-#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000)
-
-static struct resource emi_resources[] = {
- [0] = {
- .start = PHYS_EMI_CBLOCK,
- .end = PHYS_EMI_CBLOCK + 0x00300000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EMI_DBLOCK,
- .end = PHYS_EMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device emi_device = {
- .name = "emi",
- .num_resources = ARRAY_SIZE(emi_resources),
- .resource = emi_resources,
-};
-
-static struct resource femi_resources[] = {
- [0] = {
- .start = PHYS_FEMI_CBLOCK,
- .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_FEMI_DBLOCK,
- .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device femi_device = {
- .name = "femi",
- .num_resources = ARRAY_SIZE(femi_resources),
- .resource = femi_resources,
-};
-
-static struct resource epbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1e7ffff8),
- .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_EPBR_BLOCK,
- .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device epbr_device = {
- .name = "epbr",
- .num_resources = ARRAY_SIZE(epbr_resources),
- .resource = epbr_resources,
-};
-
-static struct resource dmac_resource = {
- .start = PHYS_DMAC_BLOCK,
- .end = PHYS_DMAC_BLOCK + 0x00100000 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct superhyway_device dmac_device = {
- .name = "dmac",
- .num_resources = 1,
- .resource = &dmac_resource,
-};
-
-static struct resource pbr_resources[] = {
- [0] = {
- .start = P4SEGADDR(0x1ffffff8),
- .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PHYS_PBR_BLOCK,
- .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct superhyway_device pbr_device = {
- .name = "pbr",
- .num_resources = ARRAY_SIZE(pbr_resources),
- .resource = pbr_resources,
-};
-
-static struct superhyway_device *sh4202_devices[] __initdata = {
- &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
-};
-
-static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
-{
- u32 vcrh, vcrl;
- u64 tmp;
-
- /*
- * XXX: Even though the SH4-202 Evaluation Device documentation
- * indicates that VCRL is mapped first with VCRH at a + 0x04
- * offset, the opposite seems to be true.
- *
- * Some modules (PBR and ePBR for instance) also appear to have
- * VCRL/VCRH flipped in the documentation, but on the SH4-202
- * itself it appears that these are all consistently mapped with
- * VCRH preceding VCRL.
- *
- * Do not trust the documentation, for it is evil.
- */
- vcrh = __raw_readl(base);
- vcrl = __raw_readl(base + sizeof(u32));
-
- tmp = ((u64)vcrh << 32) | vcrl;
- memcpy(vcr, &tmp, sizeof(u64));
-
- return 0;
-}
-
-static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
-{
- u64 tmp = *(u64 *)&vcr;
-
- __raw_writel((tmp >> 32) & 0xffffffff, base);
- __raw_writel(tmp & 0xffffffff, base + sizeof(u32));
-
- return 0;
-}
-
-static struct superhyway_ops sh4202_superhyway_ops = {
- .read_vcr = sh4202_read_vcr,
- .write_vcr = sh4202_write_vcr,
-};
-
-struct superhyway_bus superhyway_channels[] = {
- { &sh4202_superhyway_ops, },
- { 0, },
-};
-
-int __init superhyway_scan_bus(struct superhyway_bus *bus)
-{
- return superhyway_add_devices(bus, sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
deleted file mode 100644
index fc44d9c88b4191..00000000000000
--- a/arch/sh/include/asm/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generated-y += syscall_table.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
deleted file mode 100644
index feccfe639e3896..00000000000000
--- a/arch/sh/include/asm/adc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ADC_H
-#define __ASM_ADC_H
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-#include <cpu/adc.h>
-
-int adc_single(unsigned int channel);
-
-#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
deleted file mode 100644
index 468fba333e896b..00000000000000
--- a/arch/sh/include/asm/addrspace.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#include <cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
- [ P0/U0 (virtual) ] 0x00000000 <------ User space
- [ P1 (fixed) cached ] 0x80000000 <------ Kernel space
- [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access
- [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area
- [ P4 control ] 0xE0000000
- */
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a) \
- ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#else
-/*
- * These will never work in 32-bit, don't even bother.
- */
-#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; })
-#endif
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000)
-
-#ifdef CONFIG_SH_STORE_QUEUES
-/*
- * This is a special case for the SH-4 store queues, as pages for this
- * space still need to be faulted in before it's possible to flush the
- * store queue cache for writeout to the remapped region.
- */
-#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000)
-#else
-#define P3_ADDR_MAX P4SEG
-#endif
-
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/alignment.h b/arch/sh/include/asm/alignment.h
deleted file mode 100644
index 4f3e715b8c2668..00000000000000
--- a/arch/sh/include/asm/alignment.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ALIGNMENT_H
-#define __ASM_SH_ALIGNMENT_H
-
-#include <linux/types.h>
-
-extern void inc_unaligned_byte_access(void);
-extern void inc_unaligned_word_access(void);
-extern void inc_unaligned_dword_access(void);
-extern void inc_unaligned_multi_access(void);
-extern void inc_unaligned_user_access(void);
-extern void inc_unaligned_kernel_access(void);
-
-#define UM_WARN (1 << 0)
-#define UM_FIXUP (1 << 1)
-#define UM_SIGNAL (1 << 2)
-
-extern unsigned int unaligned_user_action(void);
-
-extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
-
-#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/arch/sh/include/asm/asm-offsets.h b/arch/sh/include/asm/asm-offsets.h
deleted file mode 100644
index 9f8535716392cc..00000000000000
--- a/arch/sh/include/asm/asm-offsets.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <generated/asm-offsets.h>
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
deleted file mode 100644
index 059791fd394fc4..00000000000000
--- a/arch/sh/include/asm/atomic-grb.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_GRB_H
-#define __ASM_SH_ATOMIC_GRB_H
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
-} \
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- int tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%1, %0 \n\t" /* load old value */ \
- " " #op " %2, %0 \n\t" /* $op */ \
- " mov.l %0, @%1 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), \
- "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return tmp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- int res, tmp; \
- \
- __asm__ __volatile__ ( \
- " .align 2 \n\t" \
- " mova 1f, r0 \n\t" /* r0 = end point */ \
- " mov r15, r1 \n\t" /* r1 = saved sp */ \
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ \
- " mov.l @%2, %0 \n\t" /* load old value */ \
- " mov %0, %1 \n\t" /* save old value */ \
- " " #op " %3, %0 \n\t" /* $op */ \
- " mov.l %0, @%2 \n\t" /* store new value */ \
- "1: mov r1, r15 \n\t" /* LOGOUT */ \
- : "=&r" (tmp), "=&r" (res), "+r" (v) \
- : "r" (i) \
- : "memory" , "r0", "r1"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
deleted file mode 100644
index 7665de9d00d0d1..00000000000000
--- a/arch/sh/include/asm/atomic-irq.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_IRQ_H
-#define __ASM_SH_ATOMIC_IRQ_H
-
-#include <linux/irqflags.h>
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op, c_op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long flags; \
- \
- raw_local_irq_save(flags); \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
-}
-
-#define ATOMIC_OP_RETURN(op, c_op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- temp c_op i; \
- v->counter = temp; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op, c_op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long temp, flags; \
- \
- raw_local_irq_save(flags); \
- temp = v->counter; \
- v->counter c_op i; \
- raw_local_irq_restore(flags); \
- \
- return temp; \
-}
-
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_OP_RETURN(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(add, +=)
-ATOMIC_OPS(sub, -=)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op) \
- ATOMIC_OP(op, c_op) \
- ATOMIC_FETCH_OP(op, c_op)
-
-ATOMIC_OPS(and, &=)
-ATOMIC_OPS(or, |=)
-ATOMIC_OPS(xor, ^=)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
deleted file mode 100644
index b63dcfbfa14ef5..00000000000000
--- a/arch/sh/include/asm/atomic-llsc.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_LLSC_H
-#define __ASM_SH_ATOMIC_LLSC_H
-
-/*
- * SH-4A note:
- *
- * We basically get atomic_xxx_return() for free compared with
- * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
- * encoding, so the retval is automatically set without having to
- * do any special work.
- */
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-
-#define ATOMIC_OP(op) \
-static inline void arch_atomic_##op(int i, atomic_t *v) \
-{ \
- unsigned long tmp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "\n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
- : "=&z" (tmp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
-}
-
-#define ATOMIC_OP_RETURN(op) \
-static inline int arch_atomic_##op##_return(int i, atomic_t *v) \
-{ \
- unsigned long temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%2, %0 ! atomic_" #op "_return \n" \
-" " #op " %1, %0 \n" \
-" movco.l %0, @%2 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return temp; \
-}
-
-#define ATOMIC_FETCH_OP(op) \
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \
-{ \
- unsigned long res, temp; \
- \
- __asm__ __volatile__ ( \
-"1: movli.l @%3, %0 ! atomic_fetch_" #op " \n" \
-" mov %0, %1 \n" \
-" " #op " %2, %0 \n" \
-" movco.l %0, @%3 \n" \
-" bf 1b \n" \
-" synco \n" \
- : "=&z" (temp), "=&r" (res) \
- : "r" (i), "r" (&v->counter) \
- : "t"); \
- \
- return res; \
-}
-
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
-
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
-#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
deleted file mode 100644
index 528bfeda78f569..00000000000000
--- a/arch/sh/include/asm/atomic.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ATOMIC_H
-#define __ASM_SH_ATOMIC_H
-
-#if defined(CONFIG_CPU_J2)
-
-#include <asm-generic/atomic.h>
-
-#else
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- *
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-#include <asm/barrier.h>
-
-#define arch_atomic_read(v) READ_ONCE((v)->counter)
-#define arch_atomic_set(v,i) WRITE_ONCE((v)->counter, (i))
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/atomic-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/atomic-llsc.h>
-#else
-#include <asm/atomic-irq.h>
-#endif
-
-#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
-#define arch_atomic_cmpxchg(v, o, n) (arch_cmpxchg(&((v)->counter), (o), (n)))
-
-#endif /* CONFIG_CPU_J2 */
-
-#endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h
deleted file mode 100644
index 0d58a0159aa6dc..00000000000000
--- a/arch/sh/include/asm/barrier.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-#ifndef __ASM_SH_BARRIER_H
-#define __ASM_SH_BARRIER_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/cache_insns.h>
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A)
-#define mb() __asm__ __volatile__ ("synco": : :"memory")
-#define rmb() mb()
-#define wmb() mb()
-#define ctrl_barrier() __icbi(PAGE_OFFSET)
-#else
-#if defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#define __smp_mb() do { int tmp = 0; __asm__ __volatile__ ("cas.l %0,%0,@%1" : "+r"(tmp) : "z"(&tmp) : "memory", "t"); } while(0)
-#define __smp_rmb() __smp_mb()
-#define __smp_wmb() __smp_mb()
-#endif
-#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#endif
-
-#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#include <asm-generic/barrier.h>
-
-#endif /* __ASM_SH_BARRIER_H */
diff --git a/arch/sh/include/asm/bitops-cas.h b/arch/sh/include/asm/bitops-cas.h
deleted file mode 100644
index ba517b3f24da62..00000000000000
--- a/arch/sh/include/asm/bitops-cas.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_CAS_H
-#define __ASM_SH_BITOPS_CAS_H
-
-static inline unsigned __bo_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old|mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old&~mask) != old);
-
- return !!(old & mask);
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- unsigned mask, old;
- volatile unsigned *a = addr;
-
- a += nr >> 5;
- mask = 1U << (nr & 0x1f);
-
- do old = *a;
- while (__bo_cas(a, old, old^mask) != old);
-
- return !!(old & mask);
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_CAS_H */
diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
deleted file mode 100644
index 75b5980399d44d..00000000000000
--- a/arch/sh/include/asm/bitops-grb.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_GRB_H
-#define __ASM_SH_BITOPS_GRB_H
-
-static inline void set_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " or %2, %0 \n\t" /* or */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void clear_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = ~(1 << (nr & 0x1f));
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " and %2, %0 \n\t" /* and */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline void change_bit(int nr, volatile void * addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%1, %0 \n\t" /* load old value */
- " xor %2, %0 \n\t" /* xor */
- " mov.l %0, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1");
-}
-
-static inline int test_and_set_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN: r15 = size */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t"
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " or %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1" ,"t");
-
- return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void * addr)
-{
- int mask, retval,not_mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- not_mask = ~mask;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " and %4, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask),
- "r" (not_mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void * addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-14, r15 \n\t" /* LOGIN */
- " mov.l @%2, %0 \n\t" /* load old value */
- " mov %0, %1 \n\t" /* %1 = *a */
- " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */
- " mov #-1, %1 \n\t" /* retvat = -1 */
- " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */
- " xor %3, %0 \n\t"
- " mov.l %0, @%2 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (tmp),
- "=&r" (retval),
- "+r" (a)
- : "r" (mask)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h
deleted file mode 100644
index 47036845fc6837..00000000000000
--- a/arch/sh/include/asm/bitops-llsc.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_LLSC_H
-#define __ASM_SH_BITOPS_LLSC_H
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! set_bit \n\t"
- "or %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! clear_bit \n\t"
- "and %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (~mask)
- : "t", "memory"
- );
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
- int mask;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! change_bit \n\t"
- "xor %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_set_bit \n\t"
- "mov %0, %1 \n\t"
- "or %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_clear_bit \n\t"
- "mov %0, %1 \n\t"
- "and %4, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask), "r" (~mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- volatile unsigned int *a = addr;
- unsigned long tmp;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! test_and_change_bit \n\t"
- "mov %0, %1 \n\t"
- "xor %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "and %3, %1 \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (a), "r" (mask)
- : "t", "memory"
- );
-
- return retval != 0;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_LLSC_H */
diff --git a/arch/sh/include/asm/bitops-op32.h b/arch/sh/include/asm/bitops-op32.h
deleted file mode 100644
index 5ace89b4650791..00000000000000
--- a/arch/sh/include/asm/bitops-op32.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_OP32_H
-#define __ASM_SH_BITOPS_OP32_H
-
-#include <linux/bits.h>
-
-/*
- * The bit modifying instructions on SH-2A are only capable of working
- * with a 3-bit immediate, which signifies the shift position for the bit
- * being worked on.
- */
-#if defined(__BIG_ENDIAN)
-#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
-#define BYTE_NUMBER(nr) ((nr ^ BITOP_LE_SWIZZLE) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr ^ BITOP_LE_SWIZZLE) % BITS_PER_BYTE)
-#else
-#define BYTE_NUMBER(nr) ((nr) / BITS_PER_BYTE)
-#define BYTE_OFFSET(nr) ((nr) % BITS_PER_BYTE)
-#endif
-
-static __always_inline void
-arch___set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bset.b %1, @(%O2,%0) ! __set_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)), "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p |= mask;
- }
-}
-
-static __always_inline void
-arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bclr.b %1, @(%O2,%0) ! __clear_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p &= ~mask;
- }
-}
-
-/**
- * arch___change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __always_inline void
-arch___change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- if (__builtin_constant_p(nr)) {
- __asm__ __volatile__ (
- "bxor.b %1, @(%O2,%0) ! __change_bit\n\t"
- : "+r" (addr)
- : "i" (BYTE_OFFSET(nr)),
- "i" (BYTE_NUMBER(nr))
- : "t", "memory"
- );
- } else {
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
-
- *p ^= mask;
- }
-}
-
-/**
- * arch___test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old | mask;
- return (old & mask) != 0;
-}
-
-/**
- * arch___test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool
-arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old & ~mask;
- return (old & mask) != 0;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __always_inline bool
-arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
-{
- unsigned long mask = BIT_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
- unsigned long old = *p;
-
- *p = old ^ mask;
- return (old & mask) != 0;
-}
-
-#define arch_test_bit generic_test_bit
-#define arch_test_bit_acquire generic_test_bit_acquire
-
-#include <asm-generic/bitops/non-instrumented-non-atomic.h>
-
-#endif /* __ASM_SH_BITOPS_OP32_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
deleted file mode 100644
index 10ceb0d6b5a997..00000000000000
--- a/arch/sh/include/asm/bitops.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BITOPS_H
-#define __ASM_SH_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/* For __swab32 */
-#include <asm/byteorder.h>
-#include <asm/barrier.h>
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/bitops-grb.h>
-#elif defined(CONFIG_CPU_SH2A)
-#include <asm-generic/bitops/atomic.h>
-#include <asm/bitops-op32.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/bitops-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/bitops-cas.h>
-#else
-#include <asm-generic/bitops/atomic.h>
-#include <asm-generic/bitops/non-atomic.h>
-#endif
-
-static inline unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bt/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
- unsigned long result;
-
- __asm__("1:\n\t"
- "shlr %1\n\t"
- "bf/s 1b\n\t"
- " add #1, %0"
- : "=r" (result), "=r" (word)
- : "0" (~0L), "1" (word)
- : "t");
- return result;
-}
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/le.h>
-
-#endif /* __ASM_SH_BITOPS_H */
diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h
deleted file mode 100644
index 5d04f2c6256376..00000000000000
--- a/arch/sh/include/asm/bl_bit.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/bl_bit_32.h>
diff --git a/arch/sh/include/asm/bl_bit_32.h b/arch/sh/include/asm/bl_bit_32.h
deleted file mode 100644
index 1f7d225fc604f8..00000000000000
--- a/arch/sh/include/asm/bl_bit_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BL_BIT_32_H
-#define __ASM_SH_BL_BIT_32_H
-
-static inline void set_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or %2, %0\n\t"
- "and %3, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "r" (0x10000000), "r" (0xffffff0f)
- : "memory"
- );
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %2, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~0x10000000)
- : "memory"
- );
-}
-
-#endif /* __ASM_SH_BL_BIT_32_H */
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
deleted file mode 100644
index 05a485c4fabcfc..00000000000000
--- a/arch/sh/include/asm/bug.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUG_H
-#define __ASM_SH_BUG_H
-
-#include <linux/linkage.h>
-
-#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */
-#define BUGFLAG_UNWINDER (1 << 1)
-
-#ifdef CONFIG_GENERIC_BUG
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-/**
- * _EMIT_BUG_ENTRY
- * %1 - __FILE__
- * %2 - __LINE__
- * %3 - trap type
- * %4 - sizeof(struct bug_entry)
- *
- * The trapa opcode itself sits in %0.
- * The %O notation is used to avoid # generation.
- *
- * The offending file and line are encoded in the __bug_table section.
- */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b, %O1\n" \
- "\t.short %O2, %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#else
-#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"aw\"\n" \
- "2:\t.long 1b\n" \
- "\t.short %O3\n" \
- "\t.org 2b+%O4\n" \
- "\t.popsection\n"
-#endif
-
-#define BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), "i" (0), \
- "i" (sizeof(struct bug_entry))); \
- unreachable(); \
-} while (0)
-
-#define __WARN_FLAGS(flags) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_WARNING|(flags)), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define WARN_ON(x) ({ \
- int __ret_warn_on = !!(x); \
- if (__builtin_constant_p(__ret_warn_on)) { \
- if (__ret_warn_on) \
- __WARN(); \
- } else { \
- if (unlikely(__ret_warn_on)) \
- __WARN(); \
- } \
- unlikely(__ret_warn_on); \
-})
-
-#define UNWINDER_BUG() \
-do { \
- __asm__ __volatile__ ( \
- "1:\t.short %O0\n" \
- _EMIT_BUG_ENTRY \
- : \
- : "n" (TRAPA_BUG_OPCODE), \
- "i" (__FILE__), \
- "i" (__LINE__), \
- "i" (BUGFLAG_UNWINDER), \
- "i" (sizeof(struct bug_entry))); \
-} while (0)
-
-#define UNWINDER_BUG_ON(x) ({ \
- int __ret_unwinder_on = !!(x); \
- if (__builtin_constant_p(__ret_unwinder_on)) { \
- if (__ret_unwinder_on) \
- UNWINDER_BUG(); \
- } else { \
- if (unlikely(__ret_unwinder_on)) \
- UNWINDER_BUG(); \
- } \
- unlikely(__ret_unwinder_on); \
-})
-
-#else
-
-#define UNWINDER_BUG BUG
-#define UNWINDER_BUG_ON BUG_ON
-
-#endif /* CONFIG_GENERIC_BUG */
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-
-/* arch/sh/kernel/traps.c */
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-extern void die_if_kernel(const char *str, struct pt_regs *regs, long err);
-extern void die_if_no_fixup(const char *str, struct pt_regs *regs, long err);
-
-#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
deleted file mode 100644
index fe52abb69cea31..00000000000000
--- a/arch/sh/include/asm/bugs.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-extern void select_idle_routine(void);
-
-static void __init check_bugs(void)
-{
- extern unsigned long loops_per_jiffy;
- char *p = &init_utsname()->machine[2]; /* "sh" */
-
- select_idle_routine();
-
- current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
- switch (current_cpu_data.family) {
- case CPU_FAMILY_SH2:
- *p++ = '2';
- break;
- case CPU_FAMILY_SH2A:
- *p++ = '2';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH3:
- *p++ = '3';
- break;
- case CPU_FAMILY_SH4:
- *p++ = '4';
- break;
- case CPU_FAMILY_SH4A:
- *p++ = '4';
- *p++ = 'a';
- break;
- case CPU_FAMILY_SH4AL_DSP:
- *p++ = '4';
- *p++ = 'a';
- *p++ = 'l';
- *p++ = '-';
- *p++ = 'd';
- *p++ = 's';
- *p++ = 'p';
- break;
- case CPU_FAMILY_UNKNOWN:
- /*
- * Specifically use CPU_FAMILY_UNKNOWN rather than
- * default:, so we're able to have the compiler whine
- * about unhandled enumerations.
- */
- break;
- }
-
- printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
- /* 'eb' means 'Endian Big' */
- *p++ = 'e';
- *p++ = 'b';
-#endif
- *p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
deleted file mode 100644
index 32dfa6b82ec663..00000000000000
--- a/arch/sh/include/asm/cache.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-
-#include <linux/init.h>
-#include <cpu/cache.h>
-
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __section(".data..read_mostly")
-
-#ifndef __ASSEMBLY__
-struct cache_info {
- unsigned int ways; /* Number of cache ways */
- unsigned int sets; /* Number of cache sets */
- unsigned int linesz; /* Cache line size (bytes) */
-
- unsigned int way_size; /* sets * line size */
-
- /*
- * way_incr is the address offset for accessing the next way
- * in memory mapped cache array ops.
- */
- unsigned int way_incr;
- unsigned int entry_shift;
- unsigned int entry_mask;
-
- /*
- * Compute a mask which selects the address bits which overlap between
- * 1. those used to select the cache set during indexing
- * 2. those in the physical page number.
- */
- unsigned int alias_mask;
- unsigned int n_aliases; /* Number of aliases */
-
- unsigned long flags;
-};
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h
deleted file mode 100644
index d7edd5297bd0f8..00000000000000
--- a/arch/sh/include/asm/cache_insns.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/cache_insns_32.h>
diff --git a/arch/sh/include/asm/cache_insns_32.h b/arch/sh/include/asm/cache_insns_32.h
deleted file mode 100644
index 470880b972cb1e..00000000000000
--- a/arch/sh/include/asm/cache_insns_32.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHE_INSNS_32_H
-#define __ASM_SH_CACHE_INSNS_32_H
-
-#include <linux/types.h>
-
-#if defined(CONFIG_CPU_SH4A)
-#define __icbi(addr) __asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
-#else
-#define __icbi(addr) mb()
-#endif
-
-#define __ocbp(addr) __asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
-#define __ocbi(addr) __asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
-#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
-
-static inline reg_size_t register_align(void *val)
-{
- return (unsigned long)(signed long)val;
-}
-
-#endif /* __ASM_SH_CACHE_INSNS_32_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
deleted file mode 100644
index 481a664287e2e4..00000000000000
--- a/arch/sh/include/asm/cacheflush.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/*
- * Cache flushing:
- *
- * - flush_cache_all() flushes entire cache
- * - flush_cache_mm(mm) flushes the specified mm context's cache lines
- * - flush_cache_dup mm(mm) handles cache flushing when forking
- * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- * - flush_cache_range(vma, start, end) flushes a range of pages
- *
- * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_range(start, end) flushes(invalidates) a range for icache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- * - flush_cache_sigtramp(vaddr) flushes the signal trampoline
- */
-extern void (*local_flush_cache_all)(void *args);
-extern void (*local_flush_cache_mm)(void *args);
-extern void (*local_flush_cache_dup_mm)(void *args);
-extern void (*local_flush_cache_page)(void *args);
-extern void (*local_flush_cache_range)(void *args);
-extern void (*local_flush_dcache_page)(void *args);
-extern void (*local_flush_icache_range)(void *args);
-extern void (*local_flush_icache_page)(void *args);
-extern void (*local_flush_cache_sigtramp)(void *args);
-
-static inline void cache_noop(void *args) { }
-
-extern void (*__flush_wback_region)(void *start, int size);
-extern void (*__flush_purge_region)(void *start, int size);
-extern void (*__flush_invalidate_region)(void *start, int size);
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_dup_mm(struct mm_struct *mm);
-extern void flush_cache_page(struct vm_area_struct *vma,
- unsigned long addr, unsigned long pfn);
-extern void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-void flush_dcache_page(struct page *page);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_user_range flush_icache_range
-extern void flush_icache_page(struct vm_area_struct *vma,
- struct page *page);
-extern void flush_cache_sigtramp(unsigned long address);
-
-struct flusher_data {
- struct vm_area_struct *vma;
- unsigned long addr1, addr2;
-};
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-extern void __flush_anon_page(struct page *page, unsigned long);
-
-static inline void flush_anon_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vmaddr)
-{
- if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
- __flush_anon_page(page, vmaddr);
-}
-
-#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
-static inline void flush_kernel_vmap_range(void *addr, int size)
-{
- __flush_wback_region(addr, size);
-}
-static inline void invalidate_kernel_vmap_range(void *addr, int size)
-{
- __flush_invalidate_region(addr, size);
-}
-
-extern void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len);
-
-#define flush_cache_vmap(start, end) local_flush_cache_all(NULL)
-#define flush_cache_vunmap(start, end) local_flush_cache_all(NULL)
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-void kmap_coherent_init(void);
-void *kmap_coherent(struct page *page, unsigned long addr);
-void kunmap_coherent(void *kvaddr);
-
-#define PG_dcache_clean PG_arch_1
-
-void cpu_cache_init(void);
-
-static inline void *sh_cacheop_vaddr(void *vaddr)
-{
- if (__in_29bit_mode())
- vaddr = (void *)CAC_ADDR((unsigned long)vaddr);
- return vaddr;
-}
-
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
deleted file mode 100644
index 00e39dd0d146a3..00000000000000
--- a/arch/sh/include/asm/checksum.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/checksum_32.h>
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
deleted file mode 100644
index a6501b856f3eb4..00000000000000
--- a/arch/sh/include/asm/checksum_32.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CHECKSUM_H
-#define __ASM_SH_CHECKSUM_H
-
-/*
- * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
- */
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, int len);
-
-#define _HAVE_ARCH_CSUM_AND_COPY
-/*
- * Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
- * access_ok().
- */
-static inline
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len)
-{
- return csum_partial_copy_generic(src, dst, len);
-}
-
-#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
-static inline
-__wsum csum_and_copy_from_user(const void __user *src, void *dst, int len)
-{
- if (!access_ok(src, len))
- return 0;
- return csum_partial_copy_generic((__force const void *)src, dst, len);
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int __dummy;
- __asm__("swap.w %0, %1\n\t"
- "extu.w %0, %0\n\t"
- "extu.w %1, %1\n\t"
- "add %1, %0\n\t"
- "swap.w %0, %1\n\t"
- "add %1, %0\n\t"
- "not %0, %0\n\t"
- : "=r" (sum), "=&r" (__dummy)
- : "0" (sum)
- : "t");
- return (__force __sum16)sum;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
- * for linux by * Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- __wsum sum;
- unsigned int __dummy0, __dummy1;
-
- __asm__ __volatile__(
- "mov.l @%1+, %0\n\t"
- "mov.l @%1+, %3\n\t"
- "add #-2, %2\n\t"
- "clrt\n\t"
- "1:\t"
- "addc %3, %0\n\t"
- "movt %4\n\t"
- "mov.l @%1+, %3\n\t"
- "dt %2\n\t"
- "bf/s 1b\n\t"
- " cmp/eq #1, %4\n\t"
- "addc %3, %0\n\t"
- "addc %2, %0" /* Here %2 is 0, add carry-bit */
- /* Since the input registers which are loaded with iph and ihl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
- : "1" (iph), "2" (ihl)
- : "t", "memory");
-
- return csum_fold(sum);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
-#ifdef __LITTLE_ENDIAN__
- unsigned long len_proto = (proto + len) << 8;
-#else
- unsigned long len_proto = proto + len;
-#endif
- __asm__("clrt\n\t"
- "addc %0, %1\n\t"
- "addc %2, %1\n\t"
- "addc %3, %1\n\t"
- "movt %0\n\t"
- "add %1, %0"
- : "=r" (sum), "=r" (len_proto)
- : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
- : "t");
-
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- __u32 len, __u8 proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, __u8 proto, __wsum sum)
-{
- unsigned int __dummy;
- __asm__("clrt\n\t"
- "mov.l @(0,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%2), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(0,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(4,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(8,%3), %1\n\t"
- "addc %1, %0\n\t"
- "mov.l @(12,%3), %1\n\t"
- "addc %1, %0\n\t"
- "addc %4, %0\n\t"
- "addc %5, %0\n\t"
- "movt %1\n\t"
- "add %1, %0\n"
- : "=r" (sum), "=&r" (__dummy)
- : "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
- : "t");
-
- return csum_fold(sum);
-}
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user(const void *src,
- void __user *dst,
- int len)
-{
- if (!access_ok(dst, len))
- return 0;
- return csum_partial_copy_generic(src, (__force void *)dst, len);
-}
-#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
deleted file mode 100644
index b65bc2908e8aaf..00000000000000
--- a/arch/sh/include/asm/clock.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/sh_clk.h>
-
-/* Should be defined by processor-specific code */
-void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
-int __init arch_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock-cpg.c */
-int __init __deprecated cpg_clk_init(void);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-cas.h b/arch/sh/include/asm/cmpxchg-cas.h
deleted file mode 100644
index f508db6eaf3192..00000000000000
--- a/arch/sh/include/asm/cmpxchg-cas.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_CAS_H
-#define __ASM_SH_CMPXCHG_CAS_H
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(m)
- : "t", "memory" );
- return new;
-}
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long old;
- do old = *m;
- while (__cmpxchg_u32(m, old, val) != old);
- return old;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_CAS_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
deleted file mode 100644
index e12279ea35cf74..00000000000000
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_GRB_H
-#define __ASM_SH_CMPXCHG_GRB_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-4, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " mov.l %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory", "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.w @%1, %0 \n\t" /* load old value */
- " extu.w %0, %0 \n\t" /* extend as unsigned */
- " mov.w %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-6, r15 \n\t" /* LOGIN */
- " mov.b @%1, %0 \n\t" /* load old value */
- " extu.b %0, %0 \n\t" /* extend as unsigned */
- " mov.b %2, @%1 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (m),
- "+r" (val) /* inhibit r15 overloading */
- :
- : "memory" , "r0", "r1");
-
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- unsigned long retval;
-
- __asm__ __volatile__ (
- " .align 2 \n\t"
- " mova 1f, r0 \n\t" /* r0 = end point */
- " nop \n\t"
- " mov r15, r1 \n\t" /* r1 = saved sp */
- " mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%3, %0 \n\t" /* load old value */
- " cmp/eq %0, %1 \n\t"
- " bf 1f \n\t" /* if not equal */
- " mov.l %2, @%3 \n\t" /* store new value */
- "1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval),
- "+r" (old), "+r" (new) /* old or new can be r15 */
- : "r" (m)
- : "memory" , "r0", "r1", "t");
-
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
deleted file mode 100644
index 07d3e7f0838919..00000000000000
--- a/arch/sh/include/asm/cmpxchg-irq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_IRQ_H
-#define __ASM_SH_CMPXCHG_IRQ_H
-
-#include <linux/irqflags.h>
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- unsigned long flags, retval;
-
- local_irq_save(flags);
- retval = *m;
- *m = val & 0xff;
- local_irq_restore(flags);
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
- unsigned long new)
-{
- __u32 retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags); /* implies memory barrier */
- return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
deleted file mode 100644
index d5270cd297c142..00000000000000
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_LLSC_H
-#define __ASM_SH_CMPXCHG_LLSC_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! xchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "mov %3, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z"(tmp), "=&r" (retval)
- : "r" (m), "r" (val)
- : "t", "memory"
- );
-
- return retval;
-}
-
-static inline unsigned long
-__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
-{
- unsigned long retval;
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! __cmpxchg_u32 \n\t"
- "mov %0, %1 \n\t"
- "cmp/eq %1, %3 \n\t"
- "bf 2f \n\t"
- "mov %4, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
- : "t", "memory"
- );
-
- return retval;
-}
-
-#include <asm/cmpxchg-xchg.h>
-
-#endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/arch/sh/include/asm/cmpxchg-xchg.h b/arch/sh/include/asm/cmpxchg-xchg.h
deleted file mode 100644
index c373f21efe4d90..00000000000000
--- a/arch/sh/include/asm/cmpxchg-xchg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_XCHG_H
-#define __ASM_SH_CMPXCHG_XCHG_H
-
-/*
- * Copyright (C) 2016 Red Hat, Inc.
- * Author: Michael S. Tsirkin <mst@redhat.com>
- */
-#include <linux/bits.h>
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-/*
- * Portable implementations of 1 and 2 byte xchg using a 4 byte cmpxchg.
- * Note: this header isn't self-contained: before including it, __cmpxchg_u32
- * must be defined first.
- */
-static inline u32 __xchg_cmpxchg(volatile void *ptr, u32 x, int size)
-{
- int off = (unsigned long)ptr % sizeof(u32);
- volatile u32 *p = ptr - off;
-#ifdef __BIG_ENDIAN
- int bitoff = (sizeof(u32) - size - off) * BITS_PER_BYTE;
-#else
- int bitoff = off * BITS_PER_BYTE;
-#endif
- u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
- u32 oldv, newv;
- u32 ret;
-
- do {
- oldv = READ_ONCE(*p);
- ret = (oldv & bitmask) >> bitoff;
- newv = (oldv & ~bitmask) | (x << bitoff);
- } while (__cmpxchg_u32(p, oldv, newv) != oldv);
-
- return ret;
-}
-
-static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
- return __xchg_cmpxchg(m, val, sizeof *m);
-}
-
-#endif /* __ASM_SH_CMPXCHG_XCHG_H */
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
deleted file mode 100644
index 0ed9b3f4a57796..00000000000000
--- a/arch/sh/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CMPXCHG_H
-#define __ASM_SH_CMPXCHG_H
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/cmpxchg-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/cmpxchg-llsc.h>
-#elif defined(CONFIG_CPU_J2) && defined(CONFIG_SMP)
-#include <asm/cmpxchg-cas.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size) \
-({ \
- unsigned long __xchg__res; \
- volatile void *__xchg_ptr = (ptr); \
- switch (size) { \
- case 4: \
- __xchg__res = xchg_u32(__xchg_ptr, x); \
- break; \
- case 2: \
- __xchg__res = xchg_u16(__xchg_ptr, x); \
- break; \
- case 1: \
- __xchg__res = xchg_u8(__xchg_ptr, x); \
- break; \
- default: \
- __xchg_called_with_bad_pointer(); \
- __xchg__res = x; \
- break; \
- } \
- \
- __xchg__res; \
-})
-
-#define arch_xchg(ptr,x) \
- ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define arch_cmpxchg(ptr,o,n) \
- ({ \
- __typeof__(*(ptr)) _o_ = (o); \
- __typeof__(*(ptr)) _n_ = (n); \
- (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
- (unsigned long)_n_, sizeof(*(ptr))); \
- })
-
-#endif /* __ASM_SH_CMPXCHG_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
deleted file mode 100644
index 6f3e686a1c6f3e..00000000000000
--- a/arch/sh/include/asm/device.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Arch specific extensions to struct device
- */
-#ifndef __ASM_SH_DEVICE_H
-#define __ASM_SH_DEVICE_H
-
-#include <asm-generic/device.h>
-
-struct platform_device;
-/* allocate contiguous memory chunk and fill in struct resource */
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize);
-
-void plat_early_device_setup(void);
-
-#endif /* __ASM_SH_DEVICE_H */
diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h
deleted file mode 100644
index 724dab912b7108..00000000000000
--- a/arch/sh/include/asm/dma-register.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Common header for the legacy SH DMA driver and the new dmaengine driver
- *
- * extracted from arch/sh/include/asm/dma-sh.h:
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-/* DMAOR definitions */
-#define DMAOR_AE 0x00000004 /* Address Error Flag */
-#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001 /* DMA Master Enable */
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L 0x00000000
-#define REQ_E 0x00080000
-#define RACK_H 0x00000000
-#define RACK_L 0x00040000
-#define ACK_R 0x00000000
-#define ACK_W 0x00020000
-#define ACK_H 0x00000000
-#define ACK_L 0x00010000
-#define DM_INC 0x00004000 /* Destination addresses are incremented */
-#define DM_DEC 0x00008000 /* Destination addresses are decremented */
-#define DM_FIX 0x0000c000 /* Destination address is fixed */
-#define SM_INC 0x00001000 /* Source addresses are incremented */
-#define SM_DEC 0x00002000 /* Source addresses are decremented */
-#define SM_FIX 0x00003000 /* Source address is fixed */
-#define RS_IN 0x00000200
-#define RS_OUT 0x00000300
-#define RS_AUTO 0x00000400 /* Auto Request */
-#define RS_ERS 0x00000800 /* DMA extended resource selector */
-#define TS_BLK 0x00000040
-#define TM_BUR 0x00000020
-#define CHCR_DE 0x00000001 /* DMA Enable */
-#define CHCR_TE 0x00000002 /* Transfer End Flag */
-#define CHCR_IE 0x00000004 /* Interrupt Enable */
-
-#endif
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
deleted file mode 100644
index c8bee3f985a293..00000000000000
--- a/arch/sh/include/asm/dma.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004 Paul Mundt
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm-generic/dma.h>
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ 0x00
-#define DMA_MODE_WRITE 0x01
-#define DMA_MODE_MASK 0x01
-
-#define DMA_AUTOINIT 0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
- DMAC_CHANNELS_CONFIGURED = 0x01,
- DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
- DMA_CONFIGURED = 0x01,
-
- /*
- * Transfer end interrupt, inherited from DMAC.
- * wait_queue used in dma_wait_for_completion.
- */
- DMA_TEI_CAPABLE = 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
- int (*request)(struct dma_channel *chan);
- void (*free)(struct dma_channel *chan);
-
- int (*get_residue)(struct dma_channel *chan);
- int (*xfer)(struct dma_channel *chan);
- int (*configure)(struct dma_channel *chan, unsigned long flags);
- int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
- char dev_id[16]; /* unique name per DMAC of channel */
-
- unsigned int chan; /* DMAC channel number */
- unsigned int vchan; /* Virtual channel number */
-
- unsigned int mode;
- unsigned int count;
-
- unsigned long sar;
- unsigned long dar;
-
- const char **caps;
-
- unsigned long flags;
- atomic_t busy;
-
- wait_queue_head_t wait_queue;
-
- struct device dev;
- void *priv_data;
-};
-
-struct dma_info {
- struct platform_device *pdev;
-
- const char *name;
- unsigned int nr_channels;
- unsigned long flags;
-
- struct dma_ops *ops;
- struct dma_channel *channels;
-
- struct list_head list;
- int first_channel_nr;
- int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
- int ch_num;
- const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
- unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to) \
- dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size) \
- dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to) \
- dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
- const char *dev_id);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#endif /* __ASM_SH_DMA_H */
diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h
deleted file mode 100644
index 69e119cfd711e2..00000000000000
--- a/arch/sh/include/asm/dmabrg.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * SH7760 DMABRG (USB/Audio) support
- */
-
-#ifndef _DMABRG_H_
-#define _DMABRG_H_
-
-/* IRQ sources */
-#define DMABRGIRQ_USBDMA 0
-#define DMABRGIRQ_USBDMAERR 1
-#define DMABRGIRQ_A0TXF 2
-#define DMABRGIRQ_A0TXH 3
-#define DMABRGIRQ_A0RXF 4
-#define DMABRGIRQ_A0RXH 5
-#define DMABRGIRQ_A1TXF 6
-#define DMABRGIRQ_A1TXH 7
-#define DMABRGIRQ_A1RXF 8
-#define DMABRGIRQ_A1RXH 9
-
-extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
-extern void dmabrg_free_irq(unsigned int);
-
-#endif
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
deleted file mode 100644
index 57195447412212..00000000000000
--- a/arch/sh/include/asm/dwarf.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- */
-#ifndef __ASM_SH_DWARF_H
-#define __ASM_SH_DWARF_H
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-/*
- * DWARF expression operations
- */
-#define DW_OP_addr 0x03
-#define DW_OP_deref 0x06
-#define DW_OP_const1u 0x08
-#define DW_OP_const1s 0x09
-#define DW_OP_const2u 0x0a
-#define DW_OP_const2s 0x0b
-#define DW_OP_const4u 0x0c
-#define DW_OP_const4s 0x0d
-#define DW_OP_const8u 0x0e
-#define DW_OP_const8s 0x0f
-#define DW_OP_constu 0x10
-#define DW_OP_consts 0x11
-#define DW_OP_dup 0x12
-#define DW_OP_drop 0x13
-#define DW_OP_over 0x14
-#define DW_OP_pick 0x15
-#define DW_OP_swap 0x16
-#define DW_OP_rot 0x17
-#define DW_OP_xderef 0x18
-#define DW_OP_abs 0x19
-#define DW_OP_and 0x1a
-#define DW_OP_div 0x1b
-#define DW_OP_minus 0x1c
-#define DW_OP_mod 0x1d
-#define DW_OP_mul 0x1e
-#define DW_OP_neg 0x1f
-#define DW_OP_not 0x20
-#define DW_OP_or 0x21
-#define DW_OP_plus 0x22
-#define DW_OP_plus_uconst 0x23
-#define DW_OP_shl 0x24
-#define DW_OP_shr 0x25
-#define DW_OP_shra 0x26
-#define DW_OP_xor 0x27
-#define DW_OP_skip 0x2f
-#define DW_OP_bra 0x28
-#define DW_OP_eq 0x29
-#define DW_OP_ge 0x2a
-#define DW_OP_gt 0x2b
-#define DW_OP_le 0x2c
-#define DW_OP_lt 0x2d
-#define DW_OP_ne 0x2e
-#define DW_OP_lit0 0x30
-#define DW_OP_lit1 0x31
-#define DW_OP_lit2 0x32
-#define DW_OP_lit3 0x33
-#define DW_OP_lit4 0x34
-#define DW_OP_lit5 0x35
-#define DW_OP_lit6 0x36
-#define DW_OP_lit7 0x37
-#define DW_OP_lit8 0x38
-#define DW_OP_lit9 0x39
-#define DW_OP_lit10 0x3a
-#define DW_OP_lit11 0x3b
-#define DW_OP_lit12 0x3c
-#define DW_OP_lit13 0x3d
-#define DW_OP_lit14 0x3e
-#define DW_OP_lit15 0x3f
-#define DW_OP_lit16 0x40
-#define DW_OP_lit17 0x41
-#define DW_OP_lit18 0x42
-#define DW_OP_lit19 0x43
-#define DW_OP_lit20 0x44
-#define DW_OP_lit21 0x45
-#define DW_OP_lit22 0x46
-#define DW_OP_lit23 0x47
-#define DW_OP_lit24 0x48
-#define DW_OP_lit25 0x49
-#define DW_OP_lit26 0x4a
-#define DW_OP_lit27 0x4b
-#define DW_OP_lit28 0x4c
-#define DW_OP_lit29 0x4d
-#define DW_OP_lit30 0x4e
-#define DW_OP_lit31 0x4f
-#define DW_OP_reg0 0x50
-#define DW_OP_reg1 0x51
-#define DW_OP_reg2 0x52
-#define DW_OP_reg3 0x53
-#define DW_OP_reg4 0x54
-#define DW_OP_reg5 0x55
-#define DW_OP_reg6 0x56
-#define DW_OP_reg7 0x57
-#define DW_OP_reg8 0x58
-#define DW_OP_reg9 0x59
-#define DW_OP_reg10 0x5a
-#define DW_OP_reg11 0x5b
-#define DW_OP_reg12 0x5c
-#define DW_OP_reg13 0x5d
-#define DW_OP_reg14 0x5e
-#define DW_OP_reg15 0x5f
-#define DW_OP_reg16 0x60
-#define DW_OP_reg17 0x61
-#define DW_OP_reg18 0x62
-#define DW_OP_reg19 0x63
-#define DW_OP_reg20 0x64
-#define DW_OP_reg21 0x65
-#define DW_OP_reg22 0x66
-#define DW_OP_reg23 0x67
-#define DW_OP_reg24 0x68
-#define DW_OP_reg25 0x69
-#define DW_OP_reg26 0x6a
-#define DW_OP_reg27 0x6b
-#define DW_OP_reg28 0x6c
-#define DW_OP_reg29 0x6d
-#define DW_OP_reg30 0x6e
-#define DW_OP_reg31 0x6f
-#define DW_OP_breg0 0x70
-#define DW_OP_breg1 0x71
-#define DW_OP_breg2 0x72
-#define DW_OP_breg3 0x73
-#define DW_OP_breg4 0x74
-#define DW_OP_breg5 0x75
-#define DW_OP_breg6 0x76
-#define DW_OP_breg7 0x77
-#define DW_OP_breg8 0x78
-#define DW_OP_breg9 0x79
-#define DW_OP_breg10 0x7a
-#define DW_OP_breg11 0x7b
-#define DW_OP_breg12 0x7c
-#define DW_OP_breg13 0x7d
-#define DW_OP_breg14 0x7e
-#define DW_OP_breg15 0x7f
-#define DW_OP_breg16 0x80
-#define DW_OP_breg17 0x81
-#define DW_OP_breg18 0x82
-#define DW_OP_breg19 0x83
-#define DW_OP_breg20 0x84
-#define DW_OP_breg21 0x85
-#define DW_OP_breg22 0x86
-#define DW_OP_breg23 0x87
-#define DW_OP_breg24 0x88
-#define DW_OP_breg25 0x89
-#define DW_OP_breg26 0x8a
-#define DW_OP_breg27 0x8b
-#define DW_OP_breg28 0x8c
-#define DW_OP_breg29 0x8d
-#define DW_OP_breg30 0x8e
-#define DW_OP_breg31 0x8f
-#define DW_OP_regx 0x90
-#define DW_OP_fbreg 0x91
-#define DW_OP_bregx 0x92
-#define DW_OP_piece 0x93
-#define DW_OP_deref_size 0x94
-#define DW_OP_xderef_size 0x95
-#define DW_OP_nop 0x96
-#define DW_OP_push_object_address 0x97
-#define DW_OP_call2 0x98
-#define DW_OP_call4 0x99
-#define DW_OP_call_ref 0x9a
-#define DW_OP_form_tls_address 0x9b
-#define DW_OP_call_frame_cfa 0x9c
-#define DW_OP_bit_piece 0x9d
-#define DW_OP_lo_user 0xe0
-#define DW_OP_hi_user 0xff
-
-/*
- * Addresses used in FDE entries in the .eh_frame section may be encoded
- * using one of the following encodings.
- */
-#define DW_EH_PE_absptr 0x00
-#define DW_EH_PE_omit 0xff
-#define DW_EH_PE_uleb128 0x01
-#define DW_EH_PE_udata2 0x02
-#define DW_EH_PE_udata4 0x03
-#define DW_EH_PE_udata8 0x04
-#define DW_EH_PE_sleb128 0x09
-#define DW_EH_PE_sdata2 0x0a
-#define DW_EH_PE_sdata4 0x0b
-#define DW_EH_PE_sdata8 0x0c
-#define DW_EH_PE_signed 0x09
-
-#define DW_EH_PE_pcrel 0x10
-
-/*
- * The architecture-specific register number that contains the return
- * address in the .debug_frame table.
- */
-#define DWARF_ARCH_RA_REG 17
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <linux/bug.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-/*
- * Read either the frame pointer (r14) or the stack pointer (r15).
- * NOTE: this MUST be inlined.
- */
-static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
-{
- unsigned long value = 0;
-
- switch (reg) {
- case 14:
- __asm__ __volatile__("mov r14, %0\n" : "=r" (value));
- break;
- case 15:
- __asm__ __volatile__("mov r15, %0\n" : "=r" (value));
- break;
- default:
- BUG();
- }
-
- return value;
-}
-
-/**
- * dwarf_cie - Common Information Entry
- */
-struct dwarf_cie {
- unsigned long length;
- unsigned long cie_id;
- unsigned char version;
- const char *augmentation;
- unsigned int code_alignment_factor;
- int data_alignment_factor;
-
- /* Which column in the rule table represents return addr of func. */
- unsigned int return_address_reg;
-
- unsigned char *initial_instructions;
- unsigned char *instructions_end;
-
- unsigned char encoding;
-
- unsigned long cie_pointer;
-
- unsigned long flags;
-#define DWARF_CIE_Z_AUGMENTATION (1 << 0)
-
- /* linked-list entry if this CIE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_fde - Frame Description Entry
- */
-struct dwarf_fde {
- unsigned long length;
- unsigned long cie_pointer;
- struct dwarf_cie *cie;
- unsigned long initial_location;
- unsigned long address_range;
- unsigned char *instructions;
- unsigned char *end;
-
- /* linked-list entry if this FDE is from a module */
- struct list_head link;
-
- struct rb_node node;
-};
-
-/**
- * dwarf_frame - DWARF information for a frame in the call stack
- */
-struct dwarf_frame {
- struct dwarf_frame *prev, *next;
-
- unsigned long pc;
-
- struct list_head reg_list;
-
- unsigned long cfa;
-
- /* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
- unsigned int cfa_register;
- unsigned int cfa_offset;
-
- /* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
- unsigned char *cfa_expr;
- unsigned int cfa_expr_len;
-
- unsigned long flags;
-#define DWARF_FRAME_CFA_REG_OFFSET (1 << 0)
-#define DWARF_FRAME_CFA_REG_EXP (1 << 1)
-
- unsigned long return_addr;
-};
-
-/**
- * dwarf_reg - DWARF register
- * @flags: Describes how to calculate the value of this register
- */
-struct dwarf_reg {
- struct list_head link;
-
- unsigned int number;
-
- unsigned long addr;
- unsigned long flags;
-#define DWARF_REG_OFFSET (1 << 0)
-#define DWARF_VAL_OFFSET (1 << 1)
-#define DWARF_UNDEFINED (1 << 2)
-};
-
-/*
- * Call Frame instruction opcodes.
- */
-#define DW_CFA_advance_loc 0x40
-#define DW_CFA_offset 0x80
-#define DW_CFA_restore 0xc0
-#define DW_CFA_nop 0x00
-#define DW_CFA_set_loc 0x01
-#define DW_CFA_advance_loc1 0x02
-#define DW_CFA_advance_loc2 0x03
-#define DW_CFA_advance_loc4 0x04
-#define DW_CFA_offset_extended 0x05
-#define DW_CFA_restore_extended 0x06
-#define DW_CFA_undefined 0x07
-#define DW_CFA_same_value 0x08
-#define DW_CFA_register 0x09
-#define DW_CFA_remember_state 0x0a
-#define DW_CFA_restore_state 0x0b
-#define DW_CFA_def_cfa 0x0c
-#define DW_CFA_def_cfa_register 0x0d
-#define DW_CFA_def_cfa_offset 0x0e
-#define DW_CFA_def_cfa_expression 0x0f
-#define DW_CFA_expression 0x10
-#define DW_CFA_offset_extended_sf 0x11
-#define DW_CFA_def_cfa_sf 0x12
-#define DW_CFA_def_cfa_offset_sf 0x13
-#define DW_CFA_val_offset 0x14
-#define DW_CFA_val_offset_sf 0x15
-#define DW_CFA_val_expression 0x16
-#define DW_CFA_lo_user 0x1c
-#define DW_CFA_hi_user 0x3f
-
-/* GNU extension opcodes */
-#define DW_CFA_GNU_args_size 0x2e
-#define DW_CFA_GNU_negative_offset_extended 0x2f
-
-/*
- * Some call frame instructions encode their operands in the opcode. We
- * need some helper functions to extract both the opcode and operands
- * from an instruction.
- */
-static inline unsigned int DW_CFA_opcode(unsigned long insn)
-{
- return (insn & 0xc0);
-}
-
-static inline unsigned int DW_CFA_operand(unsigned long insn)
-{
- return (insn & 0x3f);
-}
-
-#define DW_EH_FRAME_CIE 0 /* .eh_frame CIE IDs are 0 */
-#define DW_CIE_ID 0xffffffff
-#define DW64_CIE_ID 0xffffffffffffffffULL
-
-/*
- * DWARF FDE/CIE length field values.
- */
-#define DW_EXT_LO 0xfffffff0
-#define DW_EXT_HI 0xffffffff
-#define DW_EXT_DWARF64 DW_EXT_HI
-
-extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
- struct dwarf_frame *);
-extern void dwarf_free_frame(struct dwarf_frame *);
-
-extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
- struct module *);
-extern void module_dwarf_cleanup(struct module *);
-
-#endif /* !__ASSEMBLY__ */
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_REGISTER .cfi_register
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_UNDEFINED .cfi_undefined
-
-#else
-
-/*
- * Use the asm comment character to ignore the rest of the line.
- */
-#define CFI_IGNORE !
-
-#define CFI_STARTPROC CFI_IGNORE
-#define CFI_ENDPROC CFI_IGNORE
-#define CFI_DEF_CFA CFI_IGNORE
-#define CFI_REGISTER CFI_IGNORE
-#define CFI_REL_OFFSET CFI_IGNORE
-#define CFI_UNDEFINED CFI_IGNORE
-
-#ifndef __ASSEMBLY__
-static inline void dwarf_unwinder_init(void)
-{
-}
-
-#define module_dwarf_finalize(hdr, sechdrs, me) (0)
-#define module_dwarf_cleanup(mod) do { } while (0)
-
-#endif
-
-#endif /* CONFIG_DWARF_UNWINDER */
-
-#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
deleted file mode 100644
index 2862d6d1cb64f1..00000000000000
--- a/arch/sh/include/asm/elf.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <linux/utsname.h>
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* ELF header e_flags defines */
-#define EF_SH_PIC 0x100 /* -fpic */
-#define EF_SH_FDPIC 0x8000 /* -mfdpic */
-
-/* SH (particularly SHcompact) relocation types */
-#define R_SH_NONE 0
-#define R_SH_DIR32 1
-#define R_SH_REL32 2
-#define R_SH_DIR8WPN 3
-#define R_SH_IND12W 4
-#define R_SH_DIR8WPL 5
-#define R_SH_DIR8WPZ 6
-#define R_SH_DIR8BP 7
-#define R_SH_DIR8W 8
-#define R_SH_DIR8L 9
-#define R_SH_SWITCH16 25
-#define R_SH_SWITCH32 26
-#define R_SH_USES 27
-#define R_SH_COUNT 28
-#define R_SH_ALIGN 29
-#define R_SH_CODE 30
-#define R_SH_DATA 31
-#define R_SH_LABEL 32
-#define R_SH_SWITCH8 33
-#define R_SH_GNU_VTINHERIT 34
-#define R_SH_GNU_VTENTRY 35
-#define R_SH_TLS_GD_32 144
-#define R_SH_TLS_LD_32 145
-#define R_SH_TLS_LDO_32 146
-#define R_SH_TLS_IE_32 147
-#define R_SH_TLS_LE_32 148
-#define R_SH_TLS_DTPMOD32 149
-#define R_SH_TLS_DTPOFF32 150
-#define R_SH_TLS_TPOFF32 151
-#define R_SH_GOT32 160
-#define R_SH_PLT32 161
-#define R_SH_COPY 162
-#define R_SH_GLOB_DAT 163
-#define R_SH_JMP_SLOT 164
-#define R_SH_RELATIVE 165
-#define R_SH_GOTOFF 166
-#define R_SH_GOTPC 167
-
-/* FDPIC relocs */
-#define R_SH_GOT20 201
-#define R_SH_GOTOFF20 202
-#define R_SH_GOTFUNCDESC 203
-#define R_SH_GOTFUNCDESC20 204
-#define R_SH_GOTOFFFUNCDESC 205
-#define R_SH_GOTOFFFUNCDESC20 206
-#define R_SH_FUNCDESC 207
-#define R_SH_FUNCDESC_VALUE 208
-
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16 246
-#define R_SH_IMM_LOW16_PCREL 247
-#define R_SH_IMM_MEDLOW16 248
-#define R_SH_IMM_MEDLOW16_PCREL 249
-/* Keep this the last entry. */
-#define R_SH_NUM 256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA ELFDATA2LSB
-#else
-#define ELF_DATA ELFDATA2MSB
-#endif
-#define ELF_ARCH EM_SH
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_SH)
-#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC)
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC)
-
-/*
- * Enable dump using regset.
- * This covers all of general/DSP/FPU regs.
- */
-#define CORE_DUMP_USE_REGSET
-
-#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC
-#define ELF_EXEC_PAGESIZE PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (utsname()->machine)
-
-#define ELF_PLAT_INIT(_r, load_addr) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \
- _dynamic_addr) \
-do { \
- _r->regs[0] = 0; \
- _r->regs[1] = 0; \
- _r->regs[2] = 0; \
- _r->regs[3] = 0; \
- _r->regs[4] = 0; \
- _r->regs[5] = 0; \
- _r->regs[6] = 0; \
- _r->regs[7] = 0; \
- _r->regs[8] = _exec_map_addr; \
- _r->regs[9] = _interp_map_addr; \
- _r->regs[10] = _dynamic_addr; \
- _r->regs[11] = 0; \
- _r->regs[12] = 0; \
- _r->regs[13] = 0; \
- _r->regs[14] = 0; \
- _r->sr = SR_FD; \
-} while (0)
-
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int uses_interp);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE ((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT \
- if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
- else \
- NEW_AUX_ENT(AT_IGNORE, 0)
-#else
-#define VSYSCALL_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO \
-do { \
- /* Optional FPU initialization */ \
- FPU_AUX_ENT; \
- \
- /* Optional vsyscall entry */ \
- VSYSCALL_AUX_ENT; \
- \
- /* Cache desc */ \
- NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \
- NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \
- NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \
-} while (0)
-
-#endif /* __ASM_SH_ELF_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
deleted file mode 100644
index 5ce142d8c5a89e..00000000000000
--- a/arch/sh/include/asm/entry-macros.S
+++ /dev/null
@@ -1,123 +0,0 @@
-! SPDX-License-Identifier: GPL-2.0
-! entry.S macro define
-
- .macro cli
- stc sr, r0
- or #0xf0, r0
- ldc r0, sr
- .endm
-
- .macro sti
- mov #0xfffffff0, r11
- extu.b r11, r11
- not r11, r11
- stc sr, r10
- and r11, r10
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc k_g_imask, r11
- or r11, r10
-#endif
- ldc r10, sr
- .endm
-
- .macro get_current_thread_info, ti, tmp
-#ifdef CONFIG_CPU_HAS_SR_RB
- stc r7_bank, \ti
-#else
- mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
- shll8 \tmp
- shll2 \tmp
- mov r15, \ti
- and \tmp, \ti
-#endif
- .endm
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-
- .macro TRACE_IRQS_ON
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_on
-7835:
- .endm
- .macro TRACE_IRQS_OFF
-
- mov.l r0, @-r15
- mov.l r1, @-r15
- mov.l r2, @-r15
- mov.l r3, @-r15
- mov.l r4, @-r15
- mov.l r5, @-r15
- mov.l r6, @-r15
- mov.l r7, @-r15
-
- mov.l 7834f, r0
- jsr @r0
- nop
-
- mov.l @r15+, r7
- mov.l @r15+, r6
- mov.l @r15+, r5
- mov.l @r15+, r4
- mov.l @r15+, r3
- mov.l @r15+, r2
- mov.l @r15+, r1
- mov.l @r15+, r0
- mov.l 7834f, r0
-
- bra 7835f
- nop
- .balign 4
-7834: .long trace_hardirqs_off
-7835:
- .endm
-
-#else
- .macro TRACE_IRQS_ON
- .endm
-
- .macro TRACE_IRQS_OFF
- .endm
-#endif
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-# define PREF(x) pref @x
-#else
-# define PREF(x) nop
-#endif
-
- /*
- * Macro for use within assembly. Because the DWARF unwinder
- * needs to use the frame register to unwind the stack, we
- * need to setup r14 with the value of the stack pointer as
- * the return address is usually on the stack somewhere.
- */
- .macro setup_frame_reg
-#ifdef CONFIG_DWARF_UNWINDER
- mov r15, r14
-#endif
- .endm
diff --git a/arch/sh/include/asm/extable.h b/arch/sh/include/asm/extable.h
deleted file mode 100644
index 5658d2bae37242..00000000000000
--- a/arch/sh/include/asm/extable.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_EXTABLE_H
-#define __ASM_SH_EXTABLE_H
-
-#include <asm-generic/extable.h>
-
-#endif
diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h
deleted file mode 100644
index 9a0bca2686fd3d..00000000000000
--- a/arch/sh/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
deleted file mode 100644
index b07fbc7f7bc6ac..00000000000000
--- a/arch/sh/include/asm/fixmap.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * fixmap.h: compile-time virtual memory allocation
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of P3 backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanizm,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
- /*
- * The FIX_CMAP entries are used by kmap_coherent() to get virtual
- * addresses which are of a known color, and so their values are
- * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
- * which is the same color as a page (n<<PAGE_SHIFT).
- */
-#define FIX_N_COLOURS 8
- FIX_CMAP_BEGIN,
- FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
-
-#ifdef CONFIG_IOREMAP_FIXED
- /*
- * FIX_IOREMAP entries are useful for mapping physical address
- * space before ioremap() is useable, e.g. really early in boot
- * before kmalloc() is working.
- */
-#define FIX_N_IOREMAPS 32
- FIX_IOREMAP_BEGIN,
- FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
-#endif
-
- __end_of_fixed_addresses
-};
-
-extern void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
-extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
-
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap, and leave one page empty
- * at the top of mem..
- */
-#define FIXADDR_TOP (P4SEG - PAGE_SIZE)
-#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
-
-#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NOCACHE
-
-#include <asm-generic/fixmap.h>
-
-#endif
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
deleted file mode 100644
index fee4f25555cb53..00000000000000
--- a/arch/sh/include/asm/flat.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FLAT_H
-#define __ASM_SH_FLAT_H
-
-#include <asm/unaligned.h>
-
-static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
- u32 *addr)
-{
- *addr = get_unaligned((__force u32 *)rp);
- return 0;
-}
-static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
-{
- put_unaligned(addr, (__force u32 *)rp);
- return 0;
-}
-
-#define FLAT_PLAT_INIT(_r) \
- do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
- _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
- _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
- _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
- _r->sr = SR_FD; } while (0)
-
-#endif /* __ASM_SH_FLAT_H */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
deleted file mode 100644
index 04584be8986c41..00000000000000
--- a/arch/sh/include/asm/fpu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FPU_H
-#define __ASM_SH_FPU_H
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-
-struct task_struct;
-
-#ifdef CONFIG_SH_FPU
-static inline void release_fpu(struct pt_regs *regs)
-{
- regs->sr |= SR_FD;
-}
-
-static inline void grab_fpu(struct pt_regs *regs)
-{
- regs->sr &= ~SR_FD;
-}
-
-extern void save_fpu(struct task_struct *__tsk);
-extern void restore_fpu(struct task_struct *__tsk);
-extern void fpu_state_restore(struct pt_regs *regs);
-extern void __fpu_state_restore(void);
-#else
-#define save_fpu(tsk) do { } while (0)
-#define restore_fpu(tsk) do { } while (0)
-#define release_fpu(regs) do { } while (0)
-#define grab_fpu(regs) do { } while (0)
-#define fpu_state_restore(regs) do { } while (0)
-#define __fpu_state_restore(regs) do { } while (0)
-#endif
-
-struct user_regset;
-
-extern int do_fpu_inst(unsigned short, struct pt_regs *);
-extern int init_fpu(struct task_struct *);
-
-static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- save_fpu(tsk);
- release_fpu(regs);
- } else
- tsk->thread.fpu_counter = 0;
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- __unlazy_fpu(tsk, regs);
- preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- preempt_disable();
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- release_fpu(regs);
- }
- preempt_enable();
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
deleted file mode 100644
index 87c23621b7ae81..00000000000000
--- a/arch/sh/include/asm/freq.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-
-#include <cpu/freq.h>
-
-#endif /* __ASM_SH_FREQ_H */
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
deleted file mode 100644
index b1c1dc0cc261d1..00000000000000
--- a/arch/sh/include/asm/ftrace.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FTRACE_H
-#define __ASM_SH_FTRACE_H
-
-#ifdef CONFIG_FUNCTION_TRACER
-
-#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
-#define FTRACE_SYSCALL_MAX NR_syscalls
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-
-#define MCOUNT_ADDR ((unsigned long)(mcount))
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#define CALL_ADDR ((long)(ftrace_call))
-#define STUB_ADDR ((long)(ftrace_stub))
-#define GRAPH_ADDR ((long)(ftrace_graph_call))
-#define CALLER_ADDR ((long)(ftrace_caller))
-
-#define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALL_ADDR) - 4)
-#define GRAPH_INSN_OFFSET ((CALLER_ADDR - GRAPH_ADDR) - 4)
-
-struct dyn_arch_ftrace {
- /* No extra data needed on sh */
-};
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
- /* 'addr' is the memory table address. */
- return addr;
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifndef __ASSEMBLY__
-
-/* arch/sh/kernel/return_address.c */
-extern void *return_address(unsigned int);
-
-#define ftrace_return_address(n) return_address(n)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/futex-cas.h b/arch/sh/include/asm/futex-cas.h
deleted file mode 100644
index ed738e32b5ec45..00000000000000
--- a/arch/sh/include/asm/futex-cas.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_CAS_H
-#define __ASM_SH_FUTEX_CAS_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "1:\n\t"
- "cas.l %2, %1, @r0\n"
- "2:\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "+r" (newval)
- :"r" (oldval), "i" (-EFAULT), "z" (uaddr)
- :"t", "memory");
- if (err) return err;
- *uval = newval;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_CAS_H */
diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h
deleted file mode 100644
index 9bc053242ea037..00000000000000
--- a/arch/sh/include/asm/futex-irq.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_IRQ_H
-#define __ASM_SH_FUTEX_IRQ_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- unsigned long flags;
- int ret;
- u32 prev = 0;
-
- local_irq_save(flags);
-
- ret = get_user(prev, uaddr);
- if (!ret && oldval == prev)
- ret = put_user(newval, uaddr);
-
- local_irq_restore(flags);
-
- *uval = prev;
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/arch/sh/include/asm/futex-llsc.h b/arch/sh/include/asm/futex-llsc.h
deleted file mode 100644
index 6e1570752bc1e9..00000000000000
--- a/arch/sh/include/asm/futex-llsc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_LLSC_H
-#define __ASM_SH_FUTEX_LLSC_H
-
-static inline int atomic_futex_op_cmpxchg_inatomic(u32 *uval,
- u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- int err = 0;
- __asm__ __volatile__(
- "synco\n"
- "1:\n\t"
- "movli.l @%2, r0\n\t"
- "mov r0, %1\n\t"
- "cmp/eq %1, %4\n\t"
- "bf 2f\n\t"
- "mov %5, r0\n\t"
- "movco.l r0, @%2\n\t"
- "bf 1b\n"
- "2:\n\t"
- "synco\n\t"
-#ifdef CONFIG_MMU
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %0\n\t"
- "jmp @%0\n\t"
- " mov %3, %0\n\t"
- ".balign 4\n"
- "4: .long 2b\n\t"
- ".previous\n"
- ".section __ex_table,\"a\"\n\t"
- ".long 1b, 3b\n\t"
- ".previous"
-#endif
- :"+r" (err), "=&r" (*uval)
- :"r" (uaddr), "i" (-EFAULT), "r" (oldval), "r" (newval)
- :"t", "memory", "r0");
- if (err) return err;
- return 0;
-}
-
-#endif /* __ASM_SH_FUTEX_LLSC_H */
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
deleted file mode 100644
index b70f3fce6ed77a..00000000000000
--- a/arch/sh/include/asm/futex.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_FUTEX_H
-#define __ASM_SH_FUTEX_H
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-#if !defined(CONFIG_SMP)
-#include <asm/futex-irq.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/futex-cas.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/futex-llsc.h>
-#else
-#error SMP not supported on this configuration.
-#endif
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
- u32 oldval, u32 newval)
-{
- if (!access_ok(uaddr, sizeof(u32)))
- return -EFAULT;
-
- return atomic_futex_op_cmpxchg_inatomic(uval, uaddr, oldval, newval);
-}
-
-static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
- u32 __user *uaddr)
-{
- u32 oldval, newval, prev;
- int ret;
-
- do {
- ret = get_user(oldval, uaddr);
-
- if (ret) break;
-
- switch (op) {
- case FUTEX_OP_SET:
- newval = oparg;
- break;
- case FUTEX_OP_ADD:
- newval = oldval + oparg;
- break;
- case FUTEX_OP_OR:
- newval = oldval | oparg;
- break;
- case FUTEX_OP_ANDN:
- newval = oldval & ~oparg;
- break;
- case FUTEX_OP_XOR:
- newval = oldval ^ oparg;
- break;
- default:
- ret = -ENOSYS;
- break;
- }
-
- if (ret) break;
-
- ret = futex_atomic_cmpxchg_inatomic(&prev, uaddr, oldval, newval);
- } while (!ret && prev != oldval);
-
- if (!ret)
- *oval = oldval;
-
- return ret;
-}
-
-#endif /* __ASM_SH_FUTEX_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
deleted file mode 100644
index d643250f0a0fa0..00000000000000
--- a/arch/sh/include/asm/gpio.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/gpio.h
- *
- * Generic GPIO API and pinmux table support for SuperH.
- *
- * Copyright (c) 2008 Magnus Damm
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#if defined(CONFIG_CPU_SH3)
-#include <cpu/gpio.h>
-#endif
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
deleted file mode 100644
index 9fe4495a8e90b3..00000000000000
--- a/arch/sh/include/asm/hardirq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HARDIRQ_H
-#define __ASM_SH_HARDIRQ_H
-
-extern void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
-#define ARCH_WANTS_NMI_IRQSTAT
-
-#include <asm-generic/hardirq.h>
-
-#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
deleted file mode 100644
index afb24cb034b114..00000000000000
--- a/arch/sh/include/asm/hd64461.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HD64461
-#define __ASM_SH_HD64461
-/*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2004 Paul Mundt
- * Copyright (C) 2000 YAEGASHI Takeshi
- *
- * Hitachi HD64461 companion chip support
- * (please note manual reference 0x10000000 = 0xb0000000)
- */
-
-/* Constants for PCMCIA mappings */
-#define HD64461_PCC_WINDOW 0x01000000
-
-/* Area 6 - Slot 0 - memory and/or IO card */
-#define HD64461_IOBASE 0xb0000000
-#define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x))
-#define HD64461_PCC0_BASE HD64461_IO_OFFSET(0x8000000)
-#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */
-#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */
-#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */
-
-/* Area 5 - Slot 1 - memory card only */
-#define HD64461_PCC1_BASE HD64461_IO_OFFSET(0x4000000)
-#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */
-#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */
-
-/* Standby Control Register for HD64461 */
-#define HD64461_STBCR HD64461_IO_OFFSET(0x00000000)
-#define HD64461_STBCR_CKIO_STBY 0x2000
-#define HD64461_STBCR_SAFECKE_IST 0x1000
-#define HD64461_STBCR_SLCKE_IST 0x0800
-#define HD64461_STBCR_SAFECKE_OST 0x0400
-#define HD64461_STBCR_SLCKE_OST 0x0200
-#define HD64461_STBCR_SMIAST 0x0100
-#define HD64461_STBCR_SLCDST 0x0080
-#define HD64461_STBCR_SPC0ST 0x0040
-#define HD64461_STBCR_SPC1ST 0x0020
-#define HD64461_STBCR_SAFEST 0x0010
-#define HD64461_STBCR_STM0ST 0x0008
-#define HD64461_STBCR_STM1ST 0x0004
-#define HD64461_STBCR_SIRST 0x0002
-#define HD64461_STBCR_SURTST 0x0001
-
-/* System Configuration Register */
-#define HD64461_SYSCR HD64461_IO_OFFSET(0x02)
-
-/* CPU Data Bus Control Register */
-#define HD64461_SCPUCR HD64461_IO_OFFSET(0x04)
-
-/* Base Address Register */
-#define HD64461_LCDCBAR HD64461_IO_OFFSET(0x1000)
-
-/* Line increment address */
-#define HD64461_LCDCLOR HD64461_IO_OFFSET(0x1002)
-
-/* Controls LCD controller */
-#define HD64461_LCDCCR HD64461_IO_OFFSET(0x1004)
-
-/* LCCDR control bits */
-#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */
-#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */
-#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */
-#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */
-#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */
-#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */
-
-/* Controls LCD (1) */
-#define HD64461_LDR1 HD64461_IO_OFFSET(0x1010)
-#define HD64461_LDR1_DON 0x01 /* Display On */
-#define HD64461_LDR1_DINV 0x80 /* Display Invert */
-
-/* Controls LCD (2) */
-#define HD64461_LDR2 HD64461_IO_OFFSET(0x1012)
-#define HD64461_LDHNCR HD64461_IO_OFFSET(0x1014) /* Number of horizontal characters */
-#define HD64461_LDHNSR HD64461_IO_OFFSET(0x1016) /* Specify output start position + width of CL1 */
-#define HD64461_LDVNTR HD64461_IO_OFFSET(0x1018) /* Specify total vertical lines */
-#define HD64461_LDVNDR HD64461_IO_OFFSET(0x101a) /* specify number of display vertical lines */
-#define HD64461_LDVSPR HD64461_IO_OFFSET(0x101c) /* specify vertical synchronization pos and AC nr */
-
-/* Controls LCD (3) */
-#define HD64461_LDR3 HD64461_IO_OFFSET(0x101e)
-
-/* Palette Registers */
-#define HD64461_CPTWAR HD64461_IO_OFFSET(0x1030) /* Color Palette Write Address Register */
-#define HD64461_CPTWDR HD64461_IO_OFFSET(0x1032) /* Color Palette Write Data Register */
-#define HD64461_CPTRAR HD64461_IO_OFFSET(0x1034) /* Color Palette Read Address Register */
-#define HD64461_CPTRDR HD64461_IO_OFFSET(0x1036) /* Color Palette Read Data Register */
-
-#define HD64461_GRDOR HD64461_IO_OFFSET(0x1040) /* Display Resolution Offset Register */
-#define HD64461_GRSCR HD64461_IO_OFFSET(0x1042) /* Solid Color Register */
-#define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */
-
-#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */
-#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */
-#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */
-#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */
-#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */
-#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */
-
-/* Line Drawing Registers */
-#define HD64461_LNSARH HD64461_IO_OFFSET(0x1046) /* Line Start Address Register (H) */
-#define HD64461_LNSARL HD64461_IO_OFFSET(0x1048) /* Line Start Address Register (L) */
-#define HD64461_LNAXLR HD64461_IO_OFFSET(0x104a) /* Axis Pixel Length Register */
-#define HD64461_LNDGR HD64461_IO_OFFSET(0x104c) /* Diagonal Register */
-#define HD64461_LNAXR HD64461_IO_OFFSET(0x104e) /* Axial Register */
-#define HD64461_LNERTR HD64461_IO_OFFSET(0x1050) /* Start Error Term Register */
-#define HD64461_LNMDR HD64461_IO_OFFSET(0x1052) /* Line Mode Register */
-
-/* BitBLT Registers */
-#define HD64461_BBTSSARH HD64461_IO_OFFSET(0x1054) /* Source Start Address Register (H) */
-#define HD64461_BBTSSARL HD64461_IO_OFFSET(0x1056) /* Source Start Address Register (L) */
-#define HD64461_BBTDSARH HD64461_IO_OFFSET(0x1058) /* Destination Start Address Register (H) */
-#define HD64461_BBTDSARL HD64461_IO_OFFSET(0x105a) /* Destination Start Address Register (L) */
-#define HD64461_BBTDWR HD64461_IO_OFFSET(0x105c) /* Destination Block Width Register */
-#define HD64461_BBTDHR HD64461_IO_OFFSET(0x105e) /* Destination Block Height Register */
-#define HD64461_BBTPARH HD64461_IO_OFFSET(0x1060) /* Pattern Start Address Register (H) */
-#define HD64461_BBTPARL HD64461_IO_OFFSET(0x1062) /* Pattern Start Address Register (L) */
-#define HD64461_BBTMARH HD64461_IO_OFFSET(0x1064) /* Mask Start Address Register (H) */
-#define HD64461_BBTMARL HD64461_IO_OFFSET(0x1066) /* Mask Start Address Register (L) */
-#define HD64461_BBTROPR HD64461_IO_OFFSET(0x1068) /* ROP Register */
-#define HD64461_BBTMDR HD64461_IO_OFFSET(0x106a) /* BitBLT Mode Register */
-
-/* PC Card Controller Registers */
-/* Maps to Physical Area 6 */
-#define HD64461_PCC0ISR HD64461_IO_OFFSET(0x2000) /* socket 0 interface status */
-#define HD64461_PCC0GCR HD64461_IO_OFFSET(0x2002) /* socket 0 general control */
-#define HD64461_PCC0CSCR HD64461_IO_OFFSET(0x2004) /* socket 0 card status change */
-#define HD64461_PCC0CSCIER HD64461_IO_OFFSET(0x2006) /* socket 0 card status change interrupt enable */
-#define HD64461_PCC0SCR HD64461_IO_OFFSET(0x2008) /* socket 0 software control */
-/* Maps to Physical Area 5 */
-#define HD64461_PCC1ISR HD64461_IO_OFFSET(0x2010) /* socket 1 interface status */
-#define HD64461_PCC1GCR HD64461_IO_OFFSET(0x2012) /* socket 1 general control */
-#define HD64461_PCC1CSCR HD64461_IO_OFFSET(0x2014) /* socket 1 card status change */
-#define HD64461_PCC1CSCIER HD64461_IO_OFFSET(0x2016) /* socket 1 card status change interrupt enable */
-#define HD64461_PCC1SCR HD64461_IO_OFFSET(0x2018) /* socket 1 software control */
-
-/* PCC Interface Status Register */
-#define HD64461_PCCISR_READY 0x80 /* card ready */
-#define HD64461_PCCISR_MWP 0x40 /* card write-protected */
-#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */
-#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */
-#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */
-#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */
-#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */
-#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */
-
-#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */
-#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */
-#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */
-#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */
-#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */
-#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */
-
-/* PCC General Control Register */
-#define HD64461_PCCGCR_DRVE 0x80 /* output drive */
-#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */
-#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
-#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */
-#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */
-#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */
-#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */
-#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */
-
-/* PCC Card Status Change Register */
-#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */
-#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */
-#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */
-#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */
-#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */
-#define HD64461_PCCCSCR_RC 0x04 /* READY change */
-#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */
-#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */
-
-/* PCC Card Status Change Interrupt Enable Register */
-#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */
-#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */
-#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */
-#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */
-#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */
-#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */
-
-#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */
-#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */
-#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */
-#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */
-#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/
-
-/* PCC Software Control Register */
-#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */
-#define HD64461_PCCSCR_SWP 0x01 /* write protect */
-
-/* PCC0 Output Pins Control Register */
-#define HD64461_P0OCR HD64461_IO_OFFSET(0x202a)
-
-/* PCC1 Output Pins Control Register */
-#define HD64461_P1OCR HD64461_IO_OFFSET(0x202c)
-
-/* PC Card General Control Register */
-#define HD64461_PGCR HD64461_IO_OFFSET(0x202e)
-
-/* Port Control Registers */
-#define HD64461_GPACR HD64461_IO_OFFSET(0x4000) /* Port A - Handles IRDA/TIMER */
-#define HD64461_GPBCR HD64461_IO_OFFSET(0x4002) /* Port B - Handles UART */
-#define HD64461_GPCCR HD64461_IO_OFFSET(0x4004) /* Port C - Handles PCMCIA 1 */
-#define HD64461_GPDCR HD64461_IO_OFFSET(0x4006) /* Port D - Handles PCMCIA 1 */
-
-/* Port Control Data Registers */
-#define HD64461_GPADR HD64461_IO_OFFSET(0x4010) /* A */
-#define HD64461_GPBDR HD64461_IO_OFFSET(0x4012) /* B */
-#define HD64461_GPCDR HD64461_IO_OFFSET(0x4014) /* C */
-#define HD64461_GPDDR HD64461_IO_OFFSET(0x4016) /* D */
-
-/* Interrupt Control Registers */
-#define HD64461_GPAICR HD64461_IO_OFFSET(0x4020) /* A */
-#define HD64461_GPBICR HD64461_IO_OFFSET(0x4022) /* B */
-#define HD64461_GPCICR HD64461_IO_OFFSET(0x4024) /* C */
-#define HD64461_GPDICR HD64461_IO_OFFSET(0x4026) /* D */
-
-/* Interrupt Status Registers */
-#define HD64461_GPAISR HD64461_IO_OFFSET(0x4040) /* A */
-#define HD64461_GPBISR HD64461_IO_OFFSET(0x4042) /* B */
-#define HD64461_GPCISR HD64461_IO_OFFSET(0x4044) /* C */
-#define HD64461_GPDISR HD64461_IO_OFFSET(0x4046) /* D */
-
-/* Interrupt Request Register & Interrupt Mask Register */
-#define HD64461_NIRR HD64461_IO_OFFSET(0x5000)
-#define HD64461_NIMR HD64461_IO_OFFSET(0x5002)
-
-#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
-#define OFFCHIP_IRQ_BASE 64
-#define HD64461_IRQ_NUM 16
-
-#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
-#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6)
-#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9)
-#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10)
-#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11)
-#define HD64461_IRQ_AFE (HD64461_IRQBASE+12)
-#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13)
-#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14)
-
-#define __IO_PREFIX hd64461
-#include <asm/io_generic.h>
-
-/* arch/sh/cchips/hd6446x/hd64461/setup.c */
-void hd64461_register_irq_demux(int irq,
- int (*demux) (int irq, void *dev), void *dev);
-void hd64461_unregister_irq_demux(int irq);
-
-#endif
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
deleted file mode 100644
index 4028ca4058d171..00000000000000
--- a/arch/sh/include/asm/heartbeat.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HEARTBEAT_H
-#define __ASM_SH_HEARTBEAT_H
-
-#include <linux/timer.h>
-
-#define HEARTBEAT_INVERTED (1 << 0)
-
-struct heartbeat_data {
- void __iomem *base;
- unsigned char *bit_pos;
- unsigned int nr_bits;
- struct timer_list timer;
- unsigned int regsize;
- unsigned int mask;
- unsigned long flags;
-};
-
-#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h
deleted file mode 100644
index 4d3ba39e681c4f..00000000000000
--- a/arch/sh/include/asm/hugetlb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_HUGETLB_H
-#define _ASM_SH_HUGETLB_H
-
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-#define __HAVE_ARCH_PREPARE_HUGEPAGE_RANGE
-static inline int prepare_hugepage_range(struct file *file,
- unsigned long addr, unsigned long len)
-{
- if (len & ~HPAGE_MASK)
- return -EINVAL;
- if (addr & ~HPAGE_MASK)
- return -EINVAL;
- return 0;
-}
-
-#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH
-static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
-{
- return *ptep;
-}
-
-static inline void arch_clear_hugepage_flags(struct page *page)
-{
- clear_bit(PG_dcache_clean, &page->flags);
-}
-#define arch_clear_hugepage_flags arch_clear_hugepage_flags
-
-#include <asm-generic/hugetlb.h>
-
-#endif /* _ASM_SH_HUGETLB_H */
diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h
deleted file mode 100644
index 361a0f57bdebda..00000000000000
--- a/arch/sh/include/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_BREAKPOINT_H
-#define __ASM_SH_HW_BREAKPOINT_H
-
-#include <uapi/asm/hw_breakpoint.h>
-
-#define __ARCH_HW_BREAKPOINT_H
-
-#include <linux/kdebug.h>
-#include <linux/types.h>
-
-struct arch_hw_breakpoint {
- unsigned long address;
- u16 len;
- u16 type;
-};
-
-enum {
- SH_BREAKPOINT_READ = (1 << 1),
- SH_BREAKPOINT_WRITE = (1 << 2),
- SH_BREAKPOINT_RW = SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
-
- SH_BREAKPOINT_LEN_1 = (1 << 12),
- SH_BREAKPOINT_LEN_2 = (1 << 13),
- SH_BREAKPOINT_LEN_4 = SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
- SH_BREAKPOINT_LEN_8 = (1 << 14),
-};
-
-struct sh_ubc {
- const char *name;
- unsigned int num_events;
- unsigned int trap_nr;
- void (*enable)(struct arch_hw_breakpoint *, int);
- void (*disable)(struct arch_hw_breakpoint *, int);
- void (*enable_all)(unsigned long);
- void (*disable_all)(void);
- unsigned long (*active_mask)(void);
- unsigned long (*triggered_mask)(void);
- void (*clear_triggered_mask)(unsigned long);
- struct clk *clk; /* optional interface clock / MSTP bit */
-};
-
-struct perf_event_attr;
-struct perf_event;
-struct task_struct;
-struct pmu;
-
-/* Maximum number of UBC channels */
-#define HBP_NUM 2
-
-#define hw_breakpoint_slots(type) (HBP_NUM)
-
-/* arch/sh/kernel/hw_breakpoint.c */
-extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw);
-extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data);
-
-int arch_install_hw_breakpoint(struct perf_event *bp);
-void arch_uninstall_hw_breakpoint(struct perf_event *bp);
-void hw_breakpoint_pmu_read(struct perf_event *bp);
-
-extern void arch_fill_perf_breakpoint(struct perf_event *bp);
-extern int register_sh_ubc(struct sh_ubc *);
-
-extern struct pmu perf_ops_bp;
-
-#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
deleted file mode 100644
index ce23e3332f9c97..00000000000000
--- a/arch/sh/include/asm/hw_irq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <linux/sh_intc.h>
-#include <linux/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
- unsigned char irq;
- unsigned char ipr_idx; /* Index for the IPR registered */
- unsigned char shift; /* Number of bits to shift the data */
- unsigned char priority; /* The priority */
-};
-
-struct ipr_desc {
- unsigned long *ipr_offsets;
- unsigned int nr_offsets;
- struct ipr_data *ipr_data;
- unsigned int nr_irqs;
- struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-void __init plat_irq_setup(void);
-void __init plat_irq_setup_sh3(void);
-void __init plat_irq_setup_pins(int mode);
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
- IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
- IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
deleted file mode 100644
index a777f1410a6e98..00000000000000
--- a/arch/sh/include/asm/i2c-sh7760.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * MMIO/IRQ and platform data for SH7760 I2C channels
- */
-
-#ifndef _I2C_SH7760_H_
-#define _I2C_SH7760_H_
-
-#define SH7760_I2C_DEVNAME "sh7760-i2c"
-
-#define SH7760_I2C0_MMIO 0xFE140000
-#define SH7760_I2C0_MMIOEND 0xFE14003B
-
-#define SH7760_I2C1_MMIO 0xFE150000
-#define SH7760_I2C1_MMIOEND 0xFE15003B
-
-struct sh7760_i2c_platdata {
- unsigned int speed_khz;
-};
-
-#endif
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
deleted file mode 100644
index fba90e670ed41d..00000000000000
--- a/arch/sh/include/asm/io.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_H
-#define __ASM_SH_IO_H
-
-/*
- * Convention:
- * read{b,w,l,q}/write{b,w,l,q} are for PCI,
- * while in{b,w,l}/out{b,w,l} are for ISA
- *
- * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
- * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- *
- * While read{b,w,l,q} and write{b,w,l,q} contain memory barriers
- * automatically, there are also __raw versions, which do not.
- */
-#include <linux/errno.h>
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <linux/pgtable.h>
-#include <asm-generic/iomap.h>
-
-#define __IO_PREFIX generic
-#include <asm/io_generic.h>
-#include <asm-generic/pci_iomap.h>
-#include <mach/mangle-port.h>
-
-#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v))
-#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
-#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
-#define __raw_writeq(v,a) (__chk_io_ptr(a), *(volatile u64 __force *)(a) = (v))
-
-#define __raw_readb(a) (__chk_io_ptr(a), *(volatile u8 __force *)(a))
-#define __raw_readw(a) (__chk_io_ptr(a), *(volatile u16 __force *)(a))
-#define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a))
-#define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a))
-
-#define readb_relaxed(c) ({ u8 __v = ioswabb(__raw_readb(c)); __v; })
-#define readw_relaxed(c) ({ u16 __v = ioswabw(__raw_readw(c)); __v; })
-#define readl_relaxed(c) ({ u32 __v = ioswabl(__raw_readl(c)); __v; })
-#define readq_relaxed(c) ({ u64 __v = ioswabq(__raw_readq(c)); __v; })
-
-#define writeb_relaxed(v,c) ((void)__raw_writeb((__force u8)ioswabb(v),c))
-#define writew_relaxed(v,c) ((void)__raw_writew((__force u16)ioswabw(v),c))
-#define writel_relaxed(v,c) ((void)__raw_writel((__force u32)ioswabl(v),c))
-#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64)ioswabq(v),c))
-
-#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; })
-#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; })
-#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; })
-#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; })
-
-#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); })
-#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); })
-#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); })
-#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); })
-
-#define readsb(p,d,l) __raw_readsb(p,d,l)
-#define readsw(p,d,l) __raw_readsw(p,d,l)
-#define readsl(p,d,l) __raw_readsl(p,d,l)
-
-#define writesb(p,d,l) __raw_writesb(p,d,l)
-#define writesw(p,d,l) __raw_writesw(p,d,l)
-#define writesl(p,d,l) __raw_writesl(p,d,l)
-
-#define __BUILD_UNCACHED_IO(bwlq, type) \
-static inline type read##bwlq##_uncached(unsigned long addr) \
-{ \
- type ret; \
- jump_to_uncached(); \
- ret = __raw_read##bwlq(addr); \
- back_to_cached(); \
- return ret; \
-} \
- \
-static inline void write##bwlq##_uncached(type v, unsigned long addr) \
-{ \
- jump_to_uncached(); \
- __raw_write##bwlq(v, addr); \
- back_to_cached(); \
-}
-
-__BUILD_UNCACHED_IO(b, u8)
-__BUILD_UNCACHED_IO(w, u16)
-__BUILD_UNCACHED_IO(l, u32)
-__BUILD_UNCACHED_IO(q, u64)
-
-#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \
- \
-static inline void \
-pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- __raw_write##bwlq(*__addr, mem); \
- __addr++; \
- } \
-} \
- \
-static inline void pfx##reads##bwlq(volatile void __iomem *mem, \
- void *addr, unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = __raw_read##bwlq(mem); \
- __addr++; \
- } \
-}
-
-__BUILD_MEMORY_STRING(__raw_, b, u8)
-__BUILD_MEMORY_STRING(__raw_, w, u16)
-
-void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-__BUILD_MEMORY_STRING(__raw_, q, u64)
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-
-/*
- * Slowdown I/O port space accesses for antique hardware.
- */
-#undef CONF_SLOWDOWN_IO
-
-/*
- * On SuperH I/O ports are memory mapped, so we access them using normal
- * load/store instructions. sh_io_port_base is the virtual address to
- * which all ports are being mapped.
- */
-extern unsigned long sh_io_port_base;
-
-static inline void __set_io_port_base(unsigned long pbase)
-{
- *(unsigned long *)&sh_io_port_base = pbase;
- barrier();
-}
-
-#ifdef CONFIG_GENERIC_IOMAP
-#define __ioport_map ioport_map
-#else
-extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
-#endif
-
-#ifdef CONF_SLOWDOWN_IO
-#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
-#else
-#define SLOW_DOWN_IO
-#endif
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
- \
-static inline void pfx##out##bwlq##p(type val, unsigned long port) \
-{ \
- volatile type *__addr; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- *__addr = val; \
- slow; \
-} \
- \
-static inline type pfx##in##bwlq##p(unsigned long port) \
-{ \
- volatile type *__addr; \
- type __val; \
- \
- __addr = __ioport_map(port, sizeof(type)); \
- __val = *__addr; \
- slow; \
- \
- return __val; \
-}
-
-#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
- __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwlq, type) \
- __BUILD_IOPORT_PFX(, bwlq, type)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-BUILDIO_IOPORT(q, u64)
-
-#define __BUILD_IOPORT_STRING(bwlq, type) \
- \
-static inline void outs##bwlq(unsigned long port, const void *addr, \
- unsigned int count) \
-{ \
- const volatile type *__addr = addr; \
- \
- while (count--) { \
- out##bwlq(*__addr, port); \
- __addr++; \
- } \
-} \
- \
-static inline void ins##bwlq(unsigned long port, void *addr, \
- unsigned int count) \
-{ \
- volatile type *__addr = addr; \
- \
- while (count--) { \
- *__addr = in##bwlq(port); \
- __addr++; \
- } \
-}
-
-__BUILD_IOPORT_STRING(b, u8)
-__BUILD_IOPORT_STRING(w, u16)
-__BUILD_IOPORT_STRING(l, u32)
-__BUILD_IOPORT_STRING(q, u64)
-
-#else /* !CONFIG_HAS_IOPORT_MAP */
-
-#include <asm/io_noioport.h>
-
-#endif
-
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* We really want to try and get these to memcpy etc */
-void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
-void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* Quad-word real-mode I/O, don't ask.. */
-unsigned long long peek_real_address_q(unsigned long long addr);
-unsigned long long poke_real_address_q(unsigned long long addr,
- unsigned long long val);
-
-#if !defined(CONFIG_MMU)
-#define virt_to_phys(address) ((unsigned long)(address))
-#define phys_to_virt(address) ((void *)(address))
-#else
-#define virt_to_phys(address) (__pa(address))
-#define phys_to_virt(address) (__va(address))
-#endif
-
-#ifdef CONFIG_MMU
-void iounmap(void __iomem *addr);
-void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
- pgprot_t prot, void *caller);
-
-static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL_NOCACHE,
- __builtin_return_address(0));
-}
-
-static inline void __iomem *
-ioremap_cache(phys_addr_t offset, unsigned long size)
-{
- return __ioremap_caller(offset, size, PAGE_KERNEL,
- __builtin_return_address(0));
-}
-#define ioremap_cache ioremap_cache
-
-#ifdef CONFIG_HAVE_IOREMAP_PROT
-static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
- unsigned long flags)
-{
- return __ioremap_caller(offset, size, __pgprot(flags),
- __builtin_return_address(0));
-}
-#endif /* CONFIG_HAVE_IOREMAP_PROT */
-
-#else /* CONFIG_MMU */
-static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
-{
- return (void __iomem *)(unsigned long)offset;
-}
-
-static inline void iounmap(volatile void __iomem *addr) { }
-#endif /* CONFIG_MMU */
-
-#define ioremap_uc ioremap
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-int valid_phys_addr_range(phys_addr_t addr, size_t size);
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-
-#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
deleted file mode 100644
index 87ec38f4e53291..00000000000000
--- a/arch/sh/include/asm/io_generic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Trivial I/O routine definitions, intentionally meant to be included
- * multiple times. Ugly I/O routine concatenation helpers taken from
- * alpha. Must be included _before_ io.h to avoid preprocessor-induced
- * routine mismatch.
- */
-#define IO_CONCAT(a,b) _IO_CONCAT(a,b)
-#define _IO_CONCAT(a,b) a ## _ ## b
-
-#ifndef __IO_PREFIX
-#error "Don't include this header without a valid system prefix"
-#endif
-
-void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
-void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
-void IO_CONCAT(__IO_PREFIX,mem_init)(void);
-
-#undef __IO_PREFIX
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
deleted file mode 100644
index f7938fe0f91121..00000000000000
--- a/arch/sh/include/asm/io_noioport.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_NOIOPORT_H
-#define __ASM_SH_IO_NOIOPORT_H
-
-static inline u8 inb(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u16 inw(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline u32 inl(unsigned long addr)
-{
- BUG();
- return -1;
-}
-
-static inline void outb(unsigned char x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outw(unsigned short x, unsigned long port)
-{
- BUG();
-}
-
-static inline void outl(unsigned int x, unsigned long port)
-{
- BUG();
-}
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int size)
-{
- BUG();
- return NULL;
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
- BUG();
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
-
-static inline void insb(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insw(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void insl(unsigned long port, void *dst, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsb(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsw(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-static inline void outsl(unsigned long port, const void *src, unsigned long count)
-{
- BUG();
-}
-
-#endif /* __ASM_SH_IO_NOIOPORT_H */
diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h
deleted file mode 100644
index ac01b201d9aa9b..00000000000000
--- a/arch/sh/include/asm/io_trapped.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IO_TRAPPED_H
-#define __ASM_SH_IO_TRAPPED_H
-
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <asm/page.h>
-
-#define IO_TRAPPED_MAGIC 0xfeedbeef
-
-struct trapped_io {
- unsigned int magic;
- struct resource *resource;
- unsigned int num_resources;
- unsigned int minimum_bus_width;
- struct list_head list;
- void __iomem *virt_base;
-} __aligned(PAGE_SIZE);
-
-#ifdef CONFIG_IO_TRAPPED
-int register_trapped_io(struct trapped_io *tiop);
-int handle_trapped_io(struct pt_regs *regs, unsigned long address);
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size);
-
-#ifdef CONFIG_HAS_IOMEM
-extern struct list_head trapped_mem;
-
-static inline void __iomem *
-__ioremap_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_mem, offset, size);
-}
-#else
-#define __ioremap_trapped(offset, size) NULL
-#endif
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-extern struct list_head trapped_io;
-
-static inline void __iomem *
-__ioport_map_trapped(unsigned long offset, unsigned long size)
-{
- return match_trapped_io_handler(&trapped_io, offset, size);
-}
-#else
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#else
-#define register_trapped_io(tiop) (-1)
-#define handle_trapped_io(tiop, address) 0
-#define __ioremap_trapped(offset, size) NULL
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
deleted file mode 100644
index 1c4923502fd4c1..00000000000000
--- a/arch/sh/include/asm/irq.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <linux/cpumask.h>
-#include <asm/machvec.h>
-
-/*
- * This is a special IRQ number for indicating that no IRQ has been
- * triggered and to simply ignore the IRQ dispatch. This is a special
- * case that can happen with IRQ auto-distribution when multiple CPUs
- * are woken up and signalled in parallel.
- */
-#define NO_IRQ_IGNORE ((unsigned int)-1)
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
- return irq;
-}
-
-#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-
-void init_IRQ(void);
-void migrate_irqs(void);
-
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_INTC_BALANCING
-extern unsigned int irq_lookup(unsigned int irq);
-extern void irq_finish(unsigned int irq);
-#else
-#define irq_lookup(irq) (irq)
-#define irq_finish(irq) do { } while (0)
-#endif
-
-#include <asm-generic/irq.h>
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
deleted file mode 100644
index 25f6cfef3f043a..00000000000000
--- a/arch/sh/include/asm/irqflags.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IRQFLAGS_H
-#define __ASM_SH_IRQFLAGS_H
-
-#define ARCH_IRQ_DISABLED 0xf0
-#define ARCH_IRQ_ENABLED 0x00
-
-#include <asm-generic/irqflags.h>
-
-#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
deleted file mode 100644
index de8693fabb1d95..00000000000000
--- a/arch/sh/include/asm/kdebug.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KDEBUG_H
-#define __ASM_SH_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
- DIE_TRAP,
- DIE_NMI,
- DIE_OOPS,
- DIE_BREAKPOINT,
- DIE_SSTEP,
-};
-
-/* arch/sh/kernel/dumpstack.c */
-extern void printk_address(unsigned long address, int reliable);
-extern void dump_mem(const char *str, const char *loglvl,
- unsigned long bottom, unsigned long top);
-
-#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
deleted file mode 100644
index 927d80ba2332a7..00000000000000
--- a/arch/sh/include/asm/kexec.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KEXEC_H
-#define __ASM_SH_KEXEC_H
-
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <linux/kernel.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
- * calculation for the amount of memory directly mappable into the
- * kernel memory space.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_PAGE_SIZE 4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_SH
-
-#ifdef CONFIG_KEXEC
-/* arch/sh/kernel/machine_kexec.c */
-void reserve_crashkernel(void);
-
-static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs)
-{
- if (oldregs)
- memcpy(newregs, oldregs, sizeof(*newregs));
- else {
- __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
- __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
- __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
- __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
- __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
- __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
- __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
- __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
- __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
- __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
- __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
- __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
- __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
- __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
- __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
- __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
-
- __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
- __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
- __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
-
- __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
- __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
-
- newregs->pc = _THIS_IP_;
- }
-}
-#else
-static inline void reserve_crashkernel(void) { }
-#endif /* CONFIG_KEXEC */
-
-#endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
deleted file mode 100644
index 0d5b840cb28963..00000000000000
--- a/arch/sh/include/asm/kgdb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KGDB_H
-#define __ASM_SH_KGDB_H
-
-#include <asm/cacheflush.h>
-#include <asm/ptrace.h>
-
-enum regnames {
- GDB_R0, GDB_R1, GDB_R2, GDB_R3, GDB_R4, GDB_R5, GDB_R6, GDB_R7,
- GDB_R8, GDB_R9, GDB_R10, GDB_R11, GDB_R12, GDB_R13, GDB_R14, GDB_R15,
-
- GDB_PC, GDB_PR, GDB_SR, GDB_GBR, GDB_MACH, GDB_MACL, GDB_VBR,
-};
-
-#define _GP_REGS 16
-#define _EXTRA_REGS 7
-#define GDB_SIZEOF_REG sizeof(u32)
-
-#define DBG_MAX_REG_NUM (_GP_REGS + _EXTRA_REGS)
-#define NUMREGBYTES (DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG))
-
-static inline void arch_kgdb_breakpoint(void)
-{
- __asm__ __volatile__ ("trapa #0x3c\n");
-}
-
-#define BREAK_INSTR_SIZE 2
-#define BUFMAX 2048
-
-#ifdef CONFIG_SMP
-# define CACHE_FLUSH_IS_SAFE 0
-#else
-# define CACHE_FLUSH_IS_SAFE 1
-#endif
-
-#define GDB_ADJUSTS_BREAK_OFFSET
-
-#endif /* __ASM_SH_KGDB_H */
diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
deleted file mode 100644
index eeba83e0a7d294..00000000000000
--- a/arch/sh/include/asm/kprobes.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KPROBES_H
-#define __ASM_SH_KPROBES_H
-
-#include <asm-generic/kprobes.h>
-
-#define BREAKPOINT_INSTRUCTION 0xc33a
-
-#ifdef CONFIG_KPROBES
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-typedef insn_size_t kprobe_opcode_t;
-
-#define MAX_INSN_SIZE 16
-#define MAX_STACK_SIZE 64
-#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
- (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
- ? (MAX_STACK_SIZE) \
- : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-
-#define flush_insn_slot(p) do { } while (0)
-#define kretprobe_blacklist_size 0
-
-struct kprobe;
-
-void arch_remove_kprobe(struct kprobe *);
-void __kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
- /* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-struct prev_kprobe {
- struct kprobe *kp;
- unsigned long status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
- unsigned long kprobe_status;
- struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-extern int kprobe_handle_illslot(unsigned long pc);
-#else
-
-#define kprobe_handle_illslot(pc) (-1)
-
-#endif /* CONFIG_KPROBES */
-#endif /* __ASM_SH_KPROBES_H */
diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h
deleted file mode 100644
index 7c2fa27a43f849..00000000000000
--- a/arch/sh/include/asm/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 4
-#define __ALIGN_STR ".balign 4"
-
-#endif
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
deleted file mode 100644
index 2b4b085e8f2195..00000000000000
--- a/arch/sh/include/asm/machvec.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/machvec.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- */
-
-#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <generated/machtypes.h>
-
-struct sh_machine_vector {
- void (*mv_setup)(char **cmdline_p);
- const char *mv_name;
-
- int (*mv_irq_demux)(int irq);
- void (*mv_init_irq)(void);
-
-#ifdef CONFIG_HAS_IOPORT_MAP
- void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
- void (*mv_ioport_unmap)(void __iomem *);
-#endif
-
- int (*mv_clk_init)(void);
- int (*mv_mode_pins)(void);
-
- void (*mv_mem_init)(void);
- void (*mv_mem_reserve)(void);
-};
-
-extern struct sh_machine_vector sh_mv;
-
-#define get_system_type() sh_mv.mv_name
-
-#define __initmv \
- __used __section(".machvec.init")
-
-#endif /* _ASM_SH_MACHVEC_H */
diff --git a/arch/sh/include/asm/mmiowb.h b/arch/sh/include/asm/mmiowb.h
deleted file mode 100644
index 535d59735f1d85..00000000000000
--- a/arch/sh/include/asm/mmiowb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMIOWB_H
-#define __ASM_SH_MMIOWB_H
-
-#include <asm/barrier.h>
-
-/* synco on SH-4A, otherwise a nop */
-#define mmiowb() wmb()
-
-#include <asm-generic/mmiowb.h>
-
-#endif /* __ASM_SH_MMIOWB_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
deleted file mode 100644
index 172e329fd92d02..00000000000000
--- a/arch/sh/include/asm/mmu.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MMU_H
-#define __MMU_H
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR 0xff000070
-#define PMB_IRMCR 0xff000078
-
-#define PASCR_SE 0x80000000
-
-#define PMB_ADDR 0xf6100000
-#define PMB_DATA 0xf7100000
-
-#define NR_PMB_ENTRIES 16
-
-#define PMB_E_MASK 0x0000000f
-#define PMB_E_SHIFT 8
-
-#define PMB_PFN_MASK 0xff000000
-
-#define PMB_SZ_16M 0x00000000
-#define PMB_SZ_64M 0x00000010
-#define PMB_SZ_128M 0x00000080
-#define PMB_SZ_512M 0x00000090
-#define PMB_SZ_MASK PMB_SZ_512M
-#define PMB_C 0x00000008
-#define PMB_WT 0x00000001
-#define PMB_UB 0x00000200
-#define PMB_CACHE_MASK (PMB_C | PMB_WT | PMB_UB)
-#define PMB_V 0x00000100
-
-#define PMB_NO_ENTRY (-1)
-
-#ifndef __ASSEMBLY__
-#include <linux/errno.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
- mm_context_id_t id;
- void *vdso;
-#else
- unsigned long end_brk;
-#endif
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- unsigned long exec_fdpic_loadmap;
- unsigned long interp_fdpic_loadmap;
-#endif
-} mm_context_t;
-
-#ifdef CONFIG_PMB
-/* arch/sh/mm/pmb.c */
-bool __in_29bit_mode(void);
-
-void pmb_init(void);
-int pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot);
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller);
-int pmb_unmap(void __iomem *addr);
-
-#else
-
-static inline int
-pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- return -EINVAL;
-}
-
-static inline void __iomem *
-pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- return NULL;
-}
-
-static inline int pmb_unmap(void __iomem *addr)
-{
- return -EINVAL;
-}
-
-#define pmb_init(addr) do { } while (0)
-
-#ifdef CONFIG_29BIT
-#define __in_29bit_mode() (1)
-#else
-#define __in_29bit_mode() (0)
-#endif
-
-#endif /* CONFIG_PMB */
-
-static inline void __iomem *
-pmb_remap(phys_addr_t phys, unsigned long size, pgprot_t prot)
-{
- return pmb_remap_caller(phys, size, prot, __builtin_return_address(0));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MMU_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
deleted file mode 100644
index 78eef4e7d5df28..00000000000000
--- a/arch/sh/include/asm/mmu_context.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#include <cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <linux/uaccess.h>
-#include <linux/mm_types.h>
-
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- * (a) TLB cache version (or round, cycle whatever expression you like)
- * (b) ASID (Address Space IDentifier)
- */
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMU_CONTEXT_ASID_MASK 0x0000ffff
-#else
-#define MMU_CONTEXT_ASID_MASK 0x000000ff
-#endif
-
-#define MMU_CONTEXT_VERSION_MASK (~0UL & ~MMU_CONTEXT_ASID_MASK)
-#define MMU_CONTEXT_FIRST_VERSION (MMU_CONTEXT_ASID_MASK + 1)
-
-/* Impossible ASID value, to differentiate from NO_CONTEXT. */
-#define MMU_NO_ASID MMU_CONTEXT_FIRST_VERSION
-#define NO_CONTEXT 0UL
-
-#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
-
-#ifdef CONFIG_MMU
-#define cpu_context(cpu, mm) ((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm) \
- (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK 0xfffff000
-
-#include <asm/mmu_context_32.h>
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
- unsigned long asid = asid_cache(cpu);
-
- /* Check if we have old version of context. */
- if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
- /* It's up to date, do nothing */
- return;
-
- /* It's old, we need to get new context with new version. */
- if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
- /*
- * We exhaust ASID of this version.
- * Flush all TLB and start new cycle.
- */
- local_flush_tlb_all();
-
- /*
- * Fix version; Note that we avoid version #0
- * to distinguish NO_CONTEXT.
- */
- if (!asid)
- asid = MMU_CONTEXT_FIRST_VERSION;
- }
-
- cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-#define init_new_context init_new_context
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
- int i;
-
- for_each_online_cpu(i)
- cpu_context(i, mm) = NO_CONTEXT;
-
- return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
- get_mmu_context(mm, cpu);
- set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
- struct mm_struct *next,
- struct task_struct *tsk)
-{
- unsigned int cpu = smp_processor_id();
-
- if (likely(prev != next)) {
- cpumask_set_cpu(cpu, mm_cpumask(next));
- set_TTB(next->pgd);
- activate_context(next, cpu);
- } else
- if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
- activate_context(next, cpu);
-}
-
-#include <asm-generic/mmu_context.h>
-
-#else
-
-#define set_asid(asid) do { } while (0)
-#define get_asid() (0)
-#define cpu_asid(cpu, mm) ({ (void)cpu; NO_CONTEXT; })
-#define switch_and_save_asid(asid) (0)
-#define set_TTB(pgd) do { } while (0)
-#define get_TTB() (0)
-
-#include <asm-generic/nommu_context.h>
-
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Enable MMU */
- __raw_writel(MMU_CONTROL_INIT, MMUCR);
- ctrl_barrier();
-
- if (asid_cache(cpu) == NO_CONTEXT)
- asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
- set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
- unsigned long cr;
-
- cr = __raw_readl(MMUCR);
- cr &= ~MMU_CONTROL_INIT;
- __raw_writel(cr, MMUCR);
-
- ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu() do { } while (0)
-#define disable_mmu() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
deleted file mode 100644
index bc5034fa62493b..00000000000000
--- a/arch/sh/include/asm/mmu_context_32.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMU_CONTEXT_32_H
-#define __ASM_SH_MMU_CONTEXT_32_H
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-static inline void set_asid(unsigned long asid)
-{
- __raw_writel(asid, MMU_PTEAEX);
-}
-
-static inline unsigned long get_asid(void)
-{
- return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
-}
-#else
-static inline void set_asid(unsigned long asid)
-{
- unsigned long __dummy;
-
- __asm__ __volatile__ ("mov.l %2, %0\n\t"
- "and %3, %0\n\t"
- "or %1, %0\n\t"
- "mov.l %0, %2"
- : "=&r" (__dummy)
- : "r" (asid), "m" (__m(MMU_PTEH)),
- "r" (0xffffff00));
-}
-
-static inline unsigned long get_asid(void)
-{
- unsigned long asid;
-
- __asm__ __volatile__ ("mov.l %1, %0"
- : "=r" (asid)
- : "m" (__m(MMU_PTEH)));
- asid &= MMU_CONTEXT_ASID_MASK;
- return asid;
-}
-#endif /* CONFIG_CPU_HAS_PTEAEX */
-
-/* MMU_TTB is used for optimizing the fault handling. */
-static inline void set_TTB(pgd_t *pgd)
-{
- __raw_writel((unsigned long)pgd, MMU_TTB);
-}
-
-static inline pgd_t *get_TTB(void)
-{
- return (pgd_t *)__raw_readl(MMU_TTB);
-}
-#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
deleted file mode 100644
index 7b8dead2723dc3..00000000000000
--- a/arch/sh/include/asm/mmzone.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMZONE_H
-#define __ASM_SH_MMZONE_H
-
-#ifdef CONFIG_NUMA
-#include <linux/numa.h>
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid) (node_data[nid])
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
- int nid;
-
- for (nid = 0; nid < MAX_NUMNODES; nid++)
- if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
- break;
-
- return nid;
-}
-
-static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
-{
- return NODE_DATA(pfn_to_nid(pfn));
-}
-
-/* arch/sh/mm/numa.c */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
-#else
-static inline void
-setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
-}
-#endif /* CONFIG_NUMA */
-
-/* Platform specific mem init */
-void __init plat_mem_setup(void);
-
-/* arch/sh/kernel/setup.c */
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-/* arch/sh/mm/init.c */
-void __init allocate_pgdat(unsigned int nid);
-
-#endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
deleted file mode 100644
index 337663a028dbc0..00000000000000
--- a/arch/sh/include/asm/module.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_MODULE_H
-#define _ASM_SH_MODULE_H
-
-#include <asm-generic/module.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-struct mod_arch_specific {
- struct list_head fde_list;
- struct list_head cie_list;
-};
-#endif
-
-#endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
deleted file mode 100644
index eca5daa43b93df..00000000000000
--- a/arch/sh/include/asm/page.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT 12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT 13
-#elif defined(CONFIG_PAGE_SIZE_16KB)
-# define PAGE_SHIFT 14
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT 16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-#define PTE_MASK PAGE_MASK
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT 16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT 18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT 20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT 22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT 26
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE (1UL << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-#include <asm/uncached.h>
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end, memory_limit;
-
-static inline unsigned long
-pages_do_alias(unsigned long addr1, unsigned long addr2)
-{
- return (addr1 ^ addr2) & shm_align_mask;
-}
-
-#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, void *from);
-#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE)
-
-struct page;
-struct vm_area_struct;
-
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-extern void clear_user_highpage(struct page *page, unsigned long vaddr);
-#define clear_user_highpage clear_user_highpage
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
- ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
- ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#else
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low)
-#define __pte(x) ((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#define pte_pgprot(x) __pgprot(pte_val(x) & PTE_FLAGS_MASK)
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START CONFIG_MEMORY_START
-#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
-
-/*
- * PHYSICAL_OFFSET is the offset in physical memory where the base
- * of the kernel is loaded.
- */
-#ifdef CONFIG_PHYSICAL_START
-#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
-#else
-#define PHYSICAL_OFFSET 0
-#endif
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_PMB
-#define ___pa(x) ((x)-PAGE_OFFSET+__MEMORY_START)
-#define ___va(x) ((x)+PAGE_OFFSET-__MEMORY_START)
-#else
-#define ___pa(x) ((x)-PAGE_OFFSET)
-#define ___va(x) ((x)+PAGE_OFFSET)
-#endif
-
-#ifndef __ASSEMBLY__
-#define __pa(x) ___pa((unsigned long)x)
-#define __va(x) (void *)___va((unsigned long)x)
-#endif /* !__ASSEMBLY__ */
-
-#ifdef CONFIG_UNCACHED_MAPPING
-#if defined(CONFIG_29BIT)
-#define UNCAC_ADDR(addr) P2SEGADDR(addr)
-#define CAC_ADDR(addr) P1SEGADDR(addr)
-#else
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
-#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
-#endif
-#else
-#define UNCAC_ADDR(addr) ((addr))
-#define CAC_ADDR(addr) ((addr))
-#endif
-
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START (__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET (PFN_START)
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
deleted file mode 100644
index 54c30126ea17c3..00000000000000
--- a/arch/sh/include/asm/pci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PCI_H
-#define __ASM_SH_PCI_H
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- already-configured bus numbers - to be used for buggy BIOSes
- or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses() 1
-
-/*
- * A board can define one or more PCI channels that represent built-in (or
- * external) PCI controllers.
- */
-struct pci_channel {
- struct pci_channel *next;
- struct pci_bus *bus;
-
- struct pci_ops *pci_ops;
-
- struct resource *resources;
- unsigned int nr_resources;
-
- unsigned long io_offset;
- unsigned long mem_offset;
-
- unsigned long reg_base;
- unsigned long io_map_base;
-
- unsigned int index;
- unsigned int need_domain_info;
-
- /* Optional error handling */
- struct timer_list err_timer, serr_timer;
- unsigned int err_irq, serr_irq;
-};
-
-/* arch/sh/drivers/pci/pci.c */
-extern raw_spinlock_t pci_config_lock;
-
-extern int register_pci_controller(struct pci_channel *hose);
-extern void pcibios_report_status(unsigned int status_mask, int warn);
-
-/* arch/sh/drivers/pci/common.c */
-extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 *value);
-extern int early_read_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 *value);
-extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 *value);
-extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u8 value);
-extern int early_write_config_word(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u16 value);
-extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
- int bus, int devfn, int offset, u32 value);
-extern void pcibios_enable_timers(struct pci_channel *hose);
-extern unsigned int pcibios_handle_status_errors(unsigned long addr,
- unsigned int status, struct pci_channel *hose);
-extern int pci_is_66mhz_capable(struct pci_channel *hose,
- int top_bus, int current_bus);
-
-extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
-
-#define HAVE_PCI_MMAP
-#define ARCH_GENERIC_PCI_MMAP_RESOURCE
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-#ifdef CONFIG_PCI
-/*
- * None of the SH PCI controllers support MWI, it is always treated as a
- * direct memory write.
- */
-#define PCI_DISABLE_MWI
-#endif
-
-/* Board-specific fixup routines. */
-int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- struct pci_channel *hose = bus->sysdata;
- return hose->need_domain_info;
-}
-
-#endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
deleted file mode 100644
index 468c7ca8bd2e50..00000000000000
--- a/arch/sh/include/asm/perf_event.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PERF_EVENT_H
-#define __ASM_SH_PERF_EVENT_H
-
-struct hw_perf_event;
-
-#define MAX_HWEVENTS 2
-
-struct sh_pmu {
- const char *name;
- unsigned int num_events;
- void (*disable_all)(void);
- void (*enable_all)(void);
- void (*enable)(struct hw_perf_event *, int);
- void (*disable)(struct hw_perf_event *, int);
- u64 (*read)(int);
- int (*event_map)(int);
- unsigned int max_events;
- unsigned long raw_event_mask;
- const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/* arch/sh/kernel/perf_event.c */
-extern int register_sh_pmu(struct sh_pmu *);
-extern int reserve_pmc_hardware(void);
-extern void release_pmc_hardware(void);
-
-#endif /* __ASM_SH_PERF_EVENT_H */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
deleted file mode 100644
index a9e98233c4d498..00000000000000
--- a/arch/sh/include/asm/pgalloc.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGALLOC_H
-#define __ASM_SH_PGALLOC_H
-
-#include <asm/page.h>
-
-#define __HAVE_ARCH_PMD_ALLOC_ONE
-#define __HAVE_ARCH_PMD_FREE
-#define __HAVE_ARCH_PGD_FREE
-#include <asm-generic/pgalloc.h>
-
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-#if PAGETABLE_LEVELS > 2
-extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
-extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
-extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
-#define __pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, (pmdp))
-#endif
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
- pte_t *pte)
-{
- set_pmd(pmd, __pmd((unsigned long)pte));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- pgtable_t pte)
-{
- set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
-}
-
-#define __pte_free_tlb(tlb,pte,addr) \
-do { \
- pgtable_pte_page_dtor(pte); \
- tlb_remove_page((tlb), (pte)); \
-} while (0)
-
-#endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
deleted file mode 100644
index 08bff93927ffde..00000000000000
--- a/arch/sh/include/asm/pgtable-2level.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_2LEVEL_H
-#define __ASM_SH_PGTABLE_2LEVEL_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-/*
- * traditional two-level paging structure
- */
-#define PAGETABLE_LEVELS 2
-
-/* PTE bits */
-#define PTE_MAGNITUDE 2 /* 32-bit PTEs */
-
-#define PTE_SHIFT PAGE_SHIFT
-#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
-
-#define PTRS_PER_PGD (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
-
-#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
deleted file mode 100644
index d1ce73f3bd85ef..00000000000000
--- a/arch/sh/include/asm/pgtable-3level.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_3LEVEL_H
-#define __ASM_SH_PGTABLE_3LEVEL_H
-
-#include <asm-generic/pgtable-nopud.h>
-
-/*
- * Some cores need a 3-level page table layout, for example when using
- * 64-bit PTEs and 4K pages.
- */
-#define PAGETABLE_LEVELS 3
-
-#define PTE_MAGNITUDE 3 /* 64-bit PTEs on SH-X2 TLB */
-
-/* PGD bits */
-#define PGDIR_SHIFT 30
-
-#define PTRS_PER_PGD 4
-#define USER_PTRS_PER_PGD 2
-
-/* PMD bits */
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-#define PTRS_PER_PMD ((1 << PGDIR_SHIFT) / PMD_SIZE)
-
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
-
-typedef union {
- struct {
- unsigned long pmd_low;
- unsigned long pmd_high;
- };
- unsigned long long pmd;
-} pmd_t;
-#define pmd_val(x) ((x).pmd)
-#define __pmd(x) ((pmd_t) { .pmd = (x) } )
-
-static inline pmd_t *pud_pgtable(pud_t pud)
-{
- return (pmd_t *)(unsigned long)pud_val(pud);
-}
-
-/* only used by the stubbed out hugetlb gup code, should never be called */
-#define pud_page(pud) NULL
-#define pud_none(x) (!pud_val(x))
-#define pud_present(x) (pud_val(x))
-#define pud_clear(xp) do { set_pud(xp, __pud(0)); } while (0)
-#define pud_bad(x) (pud_val(x) & ~PAGE_MASK)
-
-/*
- * (puds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
-
-#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
deleted file mode 100644
index 3ce30becf6dfa9..00000000000000
--- a/arch/sh/include/asm/pgtable.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * This file contains the functions and defines necessary to modify and
- * use the SuperH page table tree.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#ifndef __ASM_SH_PGTABLE_H
-#define __ASM_SH_PGTABLE_H
-
-#ifdef CONFIG_X2TLB
-#include <asm/pgtable-3level.h>
-#else
-#include <asm/pgtable-2level.h>
-#endif
-#include <asm/page.h>
-#include <asm/mmu.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/addrspace.h>
-#include <asm/fixmap.h>
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Effective and physical address definitions, to aid with sign
- * extension.
- */
-#define NEFF 32
-#define NEFF_SIGN (1LL << (NEFF - 1))
-#define NEFF_MASK (-1LL << NEFF)
-
-static inline unsigned long long neff_sign_extend(unsigned long val)
-{
- unsigned long long extended = val;
- return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
-}
-
-#ifdef CONFIG_29BIT
-#define NPHYS 29
-#else
-#define NPHYS 32
-#endif
-
-#define NPHYS_SIGN (1LL << (NPHYS - 1))
-#define NPHYS_MASK (-1LL << NPHYS)
-
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* Entries per level */
-#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-
-#define PHYS_ADDR_MASK29 0x1fffffff
-#define PHYS_ADDR_MASK32 0xffffffff
-
-static inline unsigned long phys_addr_mask(void)
-{
- /* Is the MMU in 29bit mode? */
- if (__in_29bit_mode())
- return PHYS_ADDR_MASK29;
-
- return PHYS_ADDR_MASK32;
-}
-
-#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
-#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
-
-#define VMALLOC_START (P3SEG)
-#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
-
-#include <asm/pgtable_32.h>
-
-/*
- * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
- * protection for execute, and considers it the same as a read. Also, write
- * permission implies read permission. This is the closest we can get..
- *
- * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
- * not only supporting separate execute, read, and write bits, but having
- * completely separate permission bits for user and kernel space.
- */
- /*xwr*/
-
-typedef pte_t *pte_addr_t;
-
-#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
-
-struct vm_area_struct;
-struct mm_struct;
-
-extern void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-extern void __update_tlb(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-
-static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
-{
- pte_t pte = *ptep;
- __update_cache(vma, address, pte);
- __update_tlb(vma, address, pte);
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-extern void page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd);
-
-static inline bool __pte_access_permitted(pte_t pte, u64 prot)
-{
- return (pte_val(pte) & (prot | _PAGE_SPECIAL)) == prot;
-}
-
-#ifdef CONFIG_X2TLB
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT;
-
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_USER_READ);
- if (write)
- prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
- return __pte_access_permitted(pte, prot);
-}
-#else
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
- u64 prot = _PAGE_PRESENT | _PAGE_USER;
-
- if (write)
- prot |= _PAGE_RW;
- return __pte_access_permitted(pte, prot);
-}
-#endif
-
-#define pte_access_permitted pte_access_permitted
-
-/* arch/sh/mm/mmap.c */
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
deleted file mode 100644
index d0240decacca7f..00000000000000
--- a/arch/sh/include/asm/pgtable_32.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- * In order to keep this relatively clean, do not use these for defining
- * SH-3 specific flags until all of the other unused bits have been
- * exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- * Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- * and timing control which (together with bit 0) are moved into the
- * old-style PTEA on the parts that support it.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */
-#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
-#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
-#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
-#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
-#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
-#define _PAGE_PROTNONE 0x200 /* software: if not present */
-#define _PAGE_ACCESSED 0x400 /* software: page referenced */
-#define _PAGE_SPECIAL 0x800 /* software: special page */
-
-#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */
-
-#define _PAGE_EXT_WIRED 0x4000 /* software: Wire TLB entry */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
-
-#ifdef CONFIG_X2TLB
-#define _PAGE_PCC_MASK 0x00000000 /* No legacy PTEA support */
-#else
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */
-
-#define _PAGE_PCC_MASK 0xe0000001
-
-/* copy the ptea attributes */
-static inline unsigned long copy_ptea_attributes(unsigned long x)
-{
- return ((x >> 28) & 0xe) | (x & 0x1);
-}
-#endif
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \
- _PAGE_SZ1 | _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \
- _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK (phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if !defined(CONFIG_MMU)
-# define _PAGE_FLAGS_HARD 0ULL
-#elif defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-# define _PAGE_FLAGS_HARD _PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-# define _PAGE_WIRED (_PAGE_EXT(_PAGE_EXT_WIRED))
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-# define _PAGE_SZHUGE (_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-# define _PAGE_WIRED (0)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD)
-#endif
-
-/*
- * Mask of bits that are to be preserved across pgprot changes.
- */
-#define _PAGE_CHG_MASK \
- (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_SPECIAL)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_EXEC | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY PAGE_EXECREAD
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC | \
- _PAGE_EXT_USER_WRITE | \
- _PAGE_EXT_USER_READ | \
- _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_WRITE | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_KERN_READ | \
- _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
- _PAGE_CACHABLE | _PAGE_ACCESSED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD PAGE_READONLY
-#define PAGE_RWX PAGE_SHARED
-#define PAGE_WRITEONLY PAGE_SHARED
-
-#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_HW_SHARED | \
- _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
- _PAGE_DIRTY | _PAGE_ACCESSED | \
- _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
- (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
- (type))
-#else /* no mmu */
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_EXECREAD __pgprot(0)
-#define PAGE_RWX __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_WRITEONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-#define PAGE_KERNEL_NOCACHE __pgprot(0)
-#define PAGE_KERNEL_RO __pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
- __pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
- ptep->pte_high = pte.pte_high;
- smp_wmb();
- ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
- __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
- __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x) (!pte_val(x))
-#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x))
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED)
-#define pte_special(pte) ((pte).pte_low & _PAGE_SPECIAL)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte) \
- ((pte).pte_high & (_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE))
-#else
-#define pte_write(pte) ((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~(_PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE));
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
- __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
- pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
- return pte;
-}
-
-static inline unsigned long pmd_page_vaddr(pmd_t pmd)
-{
- return (unsigned long)pmd_val(pmd);
-}
-
-#define pmd_pfn(pmd) (__pa(pmd_val(pmd)) >> PAGE_SHIFT)
-#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
- &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- * _PAGE_PRESENT at bit 8
- * _PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- * and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x) ((x).val & 0x1f)
-#define __swp_offset(x) ((x).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
-
-#else
-#define __swp_type(x) ((x).val & 0xff)
-#define __swp_offset(x) ((x).val >> 10)
-#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/arch/sh/include/asm/platform_early.h b/arch/sh/include/asm/platform_early.h
deleted file mode 100644
index fc802137c37d43..00000000000000
--- a/arch/sh/include/asm/platform_early.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX--License-Identifier: GPL-2.0 */
-
-#ifndef __PLATFORM_EARLY__
-#define __PLATFORM_EARLY__
-
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-
-struct sh_early_platform_driver {
- const char *class_str;
- struct platform_driver *pdrv;
- struct list_head list;
- int requested_id;
- char *buffer;
- int bufsize;
-};
-
-#define EARLY_PLATFORM_ID_UNSET -2
-#define EARLY_PLATFORM_ID_ERROR -3
-
-extern int sh_early_platform_driver_register(struct sh_early_platform_driver *epdrv,
- char *buf);
-extern void sh_early_platform_add_devices(struct platform_device **devs, int num);
-
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return !pdev->dev.driver;
-}
-
-extern void sh_early_platform_driver_register_all(char *class_str);
-extern int sh_early_platform_driver_probe(char *class_str,
- int nr_probe, int user_only);
-
-#define sh_early_platform_init(class_string, platdrv) \
- sh_early_platform_init_buffer(class_string, platdrv, NULL, 0)
-
-#ifndef MODULE
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static __initdata struct sh_early_platform_driver early_driver = { \
- .class_str = class_string, \
- .buffer = buf, \
- .bufsize = bufsiz, \
- .pdrv = platdrv, \
- .requested_id = EARLY_PLATFORM_ID_UNSET, \
-}; \
-static int __init sh_early_platform_driver_setup_func(char *buffer) \
-{ \
- return sh_early_platform_driver_register(&early_driver, buffer); \
-} \
-early_param(class_string, sh_early_platform_driver_setup_func)
-#else /* MODULE */
-#define sh_early_platform_init_buffer(class_string, platdrv, buf, bufsiz) \
-static inline char *sh_early_platform_driver_setup_func(void) \
-{ \
- return bufsiz ? buf : NULL; \
-}
-#endif /* MODULE */
-
-#endif /* __PLATFORM_EARLY__ */
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
deleted file mode 100644
index f8982b757c33ac..00000000000000
--- a/arch/sh/include/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
deleted file mode 100644
index 85a6c1c3c16e70..00000000000000
--- a/arch/sh/include/asm/processor.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-#include <asm/cache.h>
-
-#ifndef __ASSEMBLY__
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- *
- * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- * for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
- /* SH-2 types */
- CPU_SH7619, CPU_J2,
-
- /* SH-2A types */
- CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
- CPU_MXG,
-
- /* SH-3 types */
- CPU_SH7705, CPU_SH7706, CPU_SH7707,
- CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
- CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
- /* SH-4 types */
- CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
- CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
- /* SH-4A types */
- CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
- CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SH7734, CPU_SHX3,
-
- /* SH4AL-DSP types */
- CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
-
- /* Unknown subtype */
- CPU_SH_NONE
-};
-
-enum cpu_family {
- CPU_FAMILY_SH2,
- CPU_FAMILY_SH2A,
- CPU_FAMILY_SH3,
- CPU_FAMILY_SH4,
- CPU_FAMILY_SH4A,
- CPU_FAMILY_SH4AL_DSP,
- CPU_FAMILY_UNKNOWN,
-};
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
- unsigned long long next;
- unsigned long long first;
- unsigned long long last;
-
- unsigned int entries;
- unsigned int step;
-
- unsigned long flags;
-};
-
-struct sh_cpuinfo {
- unsigned int type, family;
- int cut_major, cut_minor;
- unsigned long loops_per_jiffy;
- unsigned long asid_cache;
-
- struct cache_info icache; /* Primary I-cache */
- struct cache_info dcache; /* Primary D-cache */
- struct cache_info scache; /* Secondary cache */
-
- /* TLB info */
- struct tlb_info itlb;
- struct tlb_info dtlb;
-
- unsigned int phys_bits;
- unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax() barrier()
-
-void default_idle(void);
-void stop_this_cpu(void *);
-
-/* Forward decl */
-struct seq_operations;
-struct task_struct;
-
-extern struct pt_regs fake_swapper_regs;
-
-extern void cpu_init(void);
-extern void cpu_probe(void);
-
-/* arch/sh/kernel/process.c */
-extern unsigned int xstate_size;
-extern void free_thread_xstate(struct task_struct *);
-extern struct kmem_cache *task_xstate_cachep;
-
-/* arch/sh/mm/alignment.c */
-extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
-extern int set_unalign_ctl(struct task_struct *, unsigned int val);
-
-#define GET_UNALIGN_CTL(tsk, addr) get_unalign_ctl((tsk), (addr))
-#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val))
-
-/* arch/sh/mm/init.c */
-extern unsigned int mem_init_done;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-extern const struct seq_operations cpuinfo_op;
-
-/* thread_struct flags */
-#define SH_THREAD_UAC_NOPRINT (1 << 0)
-#define SH_THREAD_UAC_SIGBUS (1 << 1)
-#define SH_THREAD_UAC_MASK (SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
-
-/* processor boot mode configuration */
-#define MODE_PIN0 (1 << 0)
-#define MODE_PIN1 (1 << 1)
-#define MODE_PIN2 (1 << 2)
-#define MODE_PIN3 (1 << 3)
-#define MODE_PIN4 (1 << 4)
-#define MODE_PIN5 (1 << 5)
-#define MODE_PIN6 (1 << 6)
-#define MODE_PIN7 (1 << 7)
-#define MODE_PIN8 (1 << 8)
-#define MODE_PIN9 (1 << 9)
-#define MODE_PIN10 (1 << 10)
-#define MODE_PIN11 (1 << 11)
-#define MODE_PIN12 (1 << 12)
-#define MODE_PIN13 (1 << 13)
-#define MODE_PIN14 (1 << 14)
-#define MODE_PIN15 (1 << 15)
-
-int generic_mode_pins(void);
-int test_mode_pin(int pin);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#else
-#define instruction_size(insn) (2)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/processor_32.h>
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
deleted file mode 100644
index 27aebf1e75a200..00000000000000
--- a/arch/sh/include/asm/processor_32.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/hw_breakpoint.h>
-
-/* Core Processor Version Register */
-#define CCN_PVR 0xff000030
-#define CCN_CVR 0xff000040
-#define CCN_PRR 0xff000044
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE 0x7c000000UL
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- * When it's set, it means the processor doesn't have right to use FPU,
- * and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- * Interrupt level mask
- */
-#define SR_DSP 0x00001000
-#define SR_IMASK 0x000000f0
-#define SR_FD 0x00008000
-#define SR_MD 0x40000000
-
-/*
- * DSP structure and data
- */
-struct sh_dsp_struct {
- unsigned long dsp_regs[14];
- long status;
-};
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- long status; /* software status information */
-};
-
-/* Dummy fpu emulator */
-struct sh_fpu_soft_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-
- unsigned char lookahead;
- unsigned long entry_pc;
-};
-
-union thread_xstate {
- struct sh_fpu_hard_struct hardfpu;
- struct sh_fpu_soft_struct softfpu;
-};
-
-struct thread_struct {
- /* Saved registers when thread is descheduled */
- unsigned long sp;
- unsigned long pc;
-
- /* Various thread flags, see SH_THREAD_xxx */
- unsigned long flags;
-
- /* Save middle states of ptrace breakpoints */
- struct perf_event *ptrace_bps[HBP_NUM];
-
-#ifdef CONFIG_SH_DSP
- /* Dsp status information */
- struct sh_dsp_struct dsp_status;
-#endif
-
- /* Extended processor state */
- union thread_xstate *xstate;
-
- /*
- * fpu_counter contains the number of consecutive context switches
- * that the FPU is used. If this is over a threshold, the lazy fpu
- * saving becomes unlazy to save the trap. This is an unsigned char
- * so that after 256 times the counter wraps and the behavior turns
- * lazy again; this to deal with bursty apps that only use FPU for
- * a short time
- */
- unsigned char fpu_counter;
-};
-
-#define INIT_THREAD { \
- .sp = sizeof(init_stack) + (long) &init_stack, \
- .flags = 0, \
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Set FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "or %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
- unsigned long __dummy;
-
- /* Clear out FD flag in SR */
- __asm__ __volatile__("stc sr, %0\n\t"
- "and %1, %0\n\t"
- "ldc %0, sr"
- : "=&r" (__dummy)
- : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT 0x00080000
-
-#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */
-#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk) (tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl);
-
-#ifdef CONFIG_DUMP_CODE
-void show_code(struct pt_regs *regs);
-#else
-static inline void show_code(struct pt_regs *regs)
-{
-}
-#endif
-
-extern unsigned long __get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15])
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
-
-#define PREFETCH_STRIDE L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-
-static inline void prefetch(const void *x)
-{
- __builtin_prefetch(x, 0, 3);
-}
-
-static inline void prefetchw(const void *x)
-{
- __builtin_prefetch(x, 1, 3);
-}
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
deleted file mode 100644
index 6c89e3e04cee7f..00000000000000
--- a/arch/sh/include/asm/ptrace.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-
-#include <linux/stringify.h>
-#include <linux/stddef.h>
-#include <linux/thread_info.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <uapi/asm/ptrace.h>
-
-#define user_mode(regs) (((regs)->sr & 0x40000000)==0)
-#define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15])
-
-static inline unsigned long instruction_pointer(struct pt_regs *regs)
-{
- return regs->pc;
-}
-static inline void instruction_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->pc = val;
-}
-
-static inline unsigned long frame_pointer(struct pt_regs *regs)
-{
- return regs->regs[14];
-}
-
-static inline unsigned long user_stack_pointer(struct pt_regs *regs)
-{
- return regs->regs[15];
-}
-
-static inline void user_stack_pointer_set(struct pt_regs *regs,
- unsigned long val)
-{
- regs->regs[15] = val;
-}
-
-#define arch_has_single_step() (1)
-
-/*
- * kprobe-based event tracer support
- */
-struct pt_regs_offset {
- const char *name;
- int offset;
-};
-
-#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
-#define REGS_OFFSET_NAME(num) \
- {.name = __stringify(r##num), .offset = offsetof(struct pt_regs, regs[num])}
-#define TREGS_OFFSET_NAME(num) \
- {.name = __stringify(tr##num), .offset = offsetof(struct pt_regs, tregs[num])}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-/* Query offset/name of register from its name/offset */
-extern int regs_query_register_offset(const char *name);
-extern const char *regs_query_register_name(unsigned int offset);
-
-extern const struct pt_regs_offset regoffset_table[];
-
-/**
- * regs_get_register() - get register value from its offset
- * @regs: pt_regs from which register value is gotten.
- * @offset: offset number of the register.
- *
- * regs_get_register returns the value of a register. The @offset is the
- * offset of the register in struct pt_regs address which specified by @regs.
- * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
- */
-static inline unsigned long regs_get_register(struct pt_regs *regs,
- unsigned int offset)
-{
- if (unlikely(offset > MAX_REG_OFFSET))
- return 0;
- return *(unsigned long *)((unsigned long)regs + offset);
-}
-
-/**
- * regs_within_kernel_stack() - check the address in the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @addr: address which is checked.
- *
- * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
- * If @addr is within the kernel stack, it returns true. If not, returns false.
- */
-static inline int regs_within_kernel_stack(struct pt_regs *regs,
- unsigned long addr)
-{
- return ((addr & ~(THREAD_SIZE - 1)) ==
- (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
-}
-
-/**
- * regs_get_kernel_stack_nth() - get Nth entry of the stack
- * @regs: pt_regs which contains kernel stack pointer.
- * @n: stack entry number.
- *
- * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
- * this returns 0.
- */
-static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
- unsigned int n)
-{
- unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
- addr += n;
- if (regs_within_kernel_stack(regs, (unsigned long)addr))
- return *addr;
- else
- return 0;
-}
-
-struct perf_event;
-struct perf_sample_data;
-
-extern void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs);
-
-#define task_pt_regs(task) \
- ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
- unsigned long pc = regs->pc;
-
- if (virt_addr_uncached(pc))
- return CAC_ADDR(pc);
-
- return pc;
-}
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h
deleted file mode 100644
index 5f37ad7c60652b..00000000000000
--- a/arch/sh/include/asm/ptrace_32.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PTRACE_32_H
-#define __ASM_SH_PTRACE_32_H
-
-#include <uapi/asm/ptrace_32.h>
-
-
-#define MAX_REG_OFFSET offsetof(struct pt_regs, tra)
-static inline long regs_return_value(struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-#endif /* __ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h
deleted file mode 100644
index c5f072572fd18a..00000000000000
--- a/arch/sh/include/asm/push-switch.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PUSH_SWITCH_H
-#define __ASM_SH_PUSH_SWITCH_H
-
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-struct push_switch {
- /* switch state */
- unsigned int state:1;
- /* debounce timer */
- struct timer_list debounce;
- /* workqueue */
- struct work_struct work;
- /* platform device, for workqueue handler */
- struct platform_device *pdev;
-};
-
-struct push_switch_platform_info {
- /* IRQ handler */
- irqreturn_t (*irq_handler)(int irq, void *data);
- /* Special IRQ flags */
- unsigned int irq_flags;
- /* Bit location of switch */
- unsigned int bit;
- /* Symbolic switch name */
- const char *name;
-};
-
-#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/arch/sh/include/asm/reboot.h b/arch/sh/include/asm/reboot.h
deleted file mode 100644
index 5c445c90df14d9..00000000000000
--- a/arch/sh/include/asm/reboot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_REBOOT_H
-#define __ASM_SH_REBOOT_H
-
-#include <linux/kdebug.h>
-
-struct pt_regs;
-
-struct machine_ops {
- void (*restart)(char *cmd);
- void (*halt)(void);
- void (*power_off)(void);
- void (*shutdown)(void);
- void (*crash_shutdown)(struct pt_regs *);
-};
-
-extern struct machine_ops machine_ops;
-
-/* arch/sh/kernel/machine_kexec.c */
-void native_machine_crash_shutdown(struct pt_regs *regs);
-
-#endif /* __ASM_SH_REBOOT_H */
diff --git a/arch/sh/include/asm/romimage-macros.h b/arch/sh/include/asm/romimage-macros.h
deleted file mode 100644
index f9352ee7c21b4b..00000000000000
--- a/arch/sh/include/asm/romimage-macros.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ROMIMAGE_MACRO_H
-#define __ROMIMAGE_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.l r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.w r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
- mov.l 1f, r1
- mov.l 2f, r0
- mov.b r0, @r1
- bra 3f
- nop
- .align 2
-1 : .long \addr
-2 : .long \data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro WAIT, time
- mov.l 2f, r3
-1 :
- nop
- tst r3, r3
- bf/s 1b
- dt r3
- bra 3f
- nop
- .align 2
-2 : .long \time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro DD, addr, addr2, nr
- mov.l 1f, r1
- mov.l @r1, r0
- bra 2f
- nop
- .align 2
-1 : .long \addr
-2 :
-.endm
-
-#endif /* __ROMIMAGE_MACRO_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
deleted file mode 100644
index 69dbae2949b0dd..00000000000000
--- a/arch/sh/include/asm/rtc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-void time_init(void);
-
-#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
-
-struct sh_rtc_platform_info {
- unsigned long capabilities;
-};
-
-#include <cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
deleted file mode 100644
index d4578395fd665c..00000000000000
--- a/arch/sh/include/asm/seccomp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SECCOMP_H
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define __SECCOMP_ARCH_LE __AUDIT_ARCH_LE
-#else
-#define __SECCOMP_ARCH_LE 0
-#endif
-
-#define SECCOMP_ARCH_NATIVE (AUDIT_ARCH_SH | __SECCOMP_ARCH_LE)
-#define SECCOMP_ARCH_NATIVE_NR NR_syscalls
-#define SECCOMP_ARCH_NATIVE_NAME "sh"
-
-#endif /* __ASM_SECCOMP_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
deleted file mode 100644
index 0cb0ca149ac34a..00000000000000
--- a/arch/sh/include/asm/sections.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SECTIONS_H
-#define __ASM_SH_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char __machvec_start[], __machvec_end[];
-extern char __uncached_start, __uncached_end;
-extern char __start_eh_frame[], __stop_eh_frame[];
-
-#endif /* __ASM_SH_SECTIONS_H */
-
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
deleted file mode 100644
index fc807011187fa1..00000000000000
--- a/arch/sh/include/asm/setup.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _SH_SETUP_H
-#define _SH_SETUP_H
-
-#include <uapi/asm/setup.h>
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-void sh_mv_setup(void);
-void check_for_initrd(void);
-void per_cpu_trap_init(void);
-
-#endif /* _SH_SETUP_H */
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
deleted file mode 100644
index 2d2423478b71d4..00000000000000
--- a/arch/sh/include/asm/sfp-machine.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * Machine-dependent software floating-point definitions.
- SuperH kernel version.
- Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
- Contributed by Richard Henderson (rth@cygnus.com),
- Jakub Jelinek (jj@ultra.linux.cz),
- David S. Miller (davem@redhat.com) and
- Peter Maydell (pmaydell@chiark.greenend.org.uk).
-*/
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __LITTLE_ENDIAN 0
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __BIG_ENDIAN 0
-#endif
-
-#define _FP_W_TYPE_SIZE 32
-#define _FP_W_TYPE unsigned long
-#define _FP_WS_TYPE signed long
-#define _FP_I_TYPE long
-
-#define _FP_MUL_MEAT_S(R,X,Y) \
- _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y) \
- _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y) \
- _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S 0
-#define _FP_NANSIGN_D 0
-#define _FP_NANSIGN_Q 0
-
-#define _FP_KEEPNANFRACP 1
-
-/*
- * If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
- do { \
- if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \
- && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \
- { \
- R##_s = Y##_s; \
- _FP_FRAC_COPY_##wc(R,Y); \
- } \
- else \
- { \
- R##_s = X##_s; \
- _FP_FRAC_COPY_##wc(R,X); \
- } \
- R##_c = FP_CLS_NAN; \
- } while (0)
-
-//#define FP_ROUNDMODE FPSCR_RM
-#define FP_DENORM_ZERO 1/*FPSCR_DN*/
-
-/* Exception flags. */
-#define FP_EX_INVALID (1<<4)
-#define FP_EX_DIVZERO (1<<3)
-#define FP_EX_OVERFLOW (1<<2)
-#define FP_EX_UNDERFLOW (1<<1)
-#define FP_EX_INEXACT (1<<0)
-
-#endif
-
diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
deleted file mode 100644
index 2d9433d7540299..00000000000000
--- a/arch/sh/include/asm/sh7760fb.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef _ASM_SH_SH7760FB_H
-#define _ASM_SH_SH7760FB_H
-
-/*
- * some bits of the colormap registers should be written as zero.
- * create a mask for that.
- */
-#define SH7760FB_PALETTE_MASK 0x00f8fcf8
-
-/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
-#define SH7760FB_DMA_MASK 0x0C000000
-
-/* palette */
-#define LDPR(x) (((x) << 2))
-
-/* framebuffer registers and bits */
-#define LDICKR 0x400
-#define LDMTR 0x402
-/* see sh7760fb.h for LDMTR bits */
-#define LDDFR 0x404
-#define LDDFR_PABD (1 << 8)
-#define LDDFR_COLOR_MASK 0x7F
-#define LDSMR 0x406
-#define LDSMR_ROT (1 << 13)
-#define LDSARU 0x408
-#define LDSARL 0x40c
-#define LDLAOR 0x410
-#define LDPALCR 0x412
-#define LDPALCR_PALS (1 << 4)
-#define LDPALCR_PALEN (1 << 0)
-#define LDHCNR 0x414
-#define LDHSYNR 0x416
-#define LDVDLNR 0x418
-#define LDVTLNR 0x41a
-#define LDVSYNR 0x41c
-#define LDACLNR 0x41e
-#define LDINTR 0x420
-#define LDPMMR 0x424
-#define LDPSPR 0x426
-#define LDCNTR 0x428
-#define LDCNTR_DON (1 << 0)
-#define LDCNTR_DON2 (1 << 4)
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define LDLIRNR 0x440
-/* LDINTR bit */
-# define LDINTR_MINTEN (1 << 15)
-# define LDINTR_FINTEN (1 << 14)
-# define LDINTR_VSINTEN (1 << 13)
-# define LDINTR_VEINTEN (1 << 12)
-# define LDINTR_MINTS (1 << 11)
-# define LDINTR_FINTS (1 << 10)
-# define LDINTR_VSINTS (1 << 9)
-# define LDINTR_VEINTS (1 << 8)
-# define VINT_START (LDINTR_VSINTEN)
-# define VINT_CHECK (LDINTR_VSINTS)
-#else
-/* LDINTR bit */
-# define LDINTR_VINTSEL (1 << 12)
-# define LDINTR_VINTE (1 << 8)
-# define LDINTR_VINTS (1 << 0)
-# define VINT_START (LDINTR_VINTSEL)
-# define VINT_CHECK (LDINTR_VINTS)
-#endif
-
-/* HSYNC polarity inversion */
-#define LDMTR_FLMPOL (1 << 15)
-
-/* VSYNC polarity inversion */
-#define LDMTR_CL1POL (1 << 14)
-
-/* DISPLAY-ENABLE polarity inversion */
-#define LDMTR_DISPEN_LOWACT (1 << 13)
-
-/* DISPLAY DATA BUS polarity inversion */
-#define LDMTR_DPOL_LOWACT (1 << 12)
-
-/* AC modulation signal enable */
-#define LDMTR_MCNT (1 << 10)
-
-/* Disable output of HSYNC during VSYNC period */
-#define LDMTR_CL1CNT (1 << 9)
-
-/* Disable output of VSYNC during VSYNC period */
-#define LDMTR_CL2CNT (1 << 8)
-
-/* Display types supported by the LCDC */
-#define LDMTR_STN_MONO_4 0x00
-#define LDMTR_STN_MONO_8 0x01
-#define LDMTR_STN_COLOR_4 0x08
-#define LDMTR_STN_COLOR_8 0x09
-#define LDMTR_STN_COLOR_12 0x0A
-#define LDMTR_STN_COLOR_16 0x0B
-#define LDMTR_DSTN_MONO_8 0x11
-#define LDMTR_DSTN_MONO_16 0x13
-#define LDMTR_DSTN_COLOR_8 0x19
-#define LDMTR_DSTN_COLOR_12 0x1A
-#define LDMTR_DSTN_COLOR_16 0x1B
-#define LDMTR_TFT_COLOR_16 0x2B
-
-/* framebuffer color layout */
-#define LDDFR_1BPP_MONO 0x00
-#define LDDFR_2BPP_MONO 0x01
-#define LDDFR_4BPP_MONO 0x02
-#define LDDFR_6BPP_MONO 0x04
-#define LDDFR_4BPP 0x0A
-#define LDDFR_8BPP 0x0C
-#define LDDFR_16BPP_RGB555 0x1D
-#define LDDFR_16BPP_RGB565 0x2D
-
-/* LCDC Pixclock sources */
-#define LCDC_CLKSRC_BUSCLOCK 0
-#define LCDC_CLKSRC_PERIPHERAL 1
-#define LCDC_CLKSRC_EXTERNAL 2
-
-#define LDICKR_CLKSRC(x) \
- (((x) & 3) << 12)
-
-/* LCDC pixclock input divider. Set to 1 at a minimum! */
-#define LDICKR_CLKDIV(x) \
- ((x) & 0x1f)
-
-struct sh7760fb_platdata {
-
- /* Set this member to a valid fb_videmode for the display you
- * wish to use. The following members must be initialized:
- * xres, yres, hsync_len, vsync_len, sync,
- * {left,right,upper,lower}_margin.
- * The driver uses the above members to calculate register values
- * and memory requirements. Other members are ignored but may
- * be used by other framebuffer layer components.
- */
- struct fb_videomode *def_mode;
-
- /* LDMTR includes display type and signal polarity. The
- * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
- * data above; however the polarities of the following signals
- * must be encoded in the ldmtr member:
- * Display Enable signal (default high-active) DISPEN_LOWACT
- * Display Data signals (default high-active) DPOL_LOWACT
- * AC Modulation signal (default off) MCNT
- * Hsync-During-Vsync suppression (default off) CL1CNT
- * Vsync-during-vsync suppression (default off) CL2CNT
- * NOTE: also set a display type!
- * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
- */
- u16 ldmtr;
-
- /* LDDFR controls framebuffer image format (depth, organization)
- * Use ONE of the LDDFR_?BPP_* macros!
- */
- u16 lddfr;
-
- /* LDPMMR and LDPSPR control the timing of the power signals
- * for the display. Please read the SH7760 Hardware Manual,
- * Chapters 30.3.17, 30.3.18 and 30.4.6!
- */
- u16 ldpmmr;
- u16 ldpspr;
-
- /* LDACLNR contains the line numbers after which the AC modulation
- * signal is to toggle. Set to ZERO for TFTs or displays which
- * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
- */
- u16 ldaclnr;
-
- /* LDICKR contains information on pixelclock source and config.
- * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
- * minimal value for CLKDIV() must be 1!.
- */
- u16 ldickr;
-
- /* set this member to 1 if you wish to use the LCDC's hardware
- * rotation function. This is limited to displays <= 320x200
- * pixels resolution!
- */
- int rotate; /* set to 1 to rotate 90 CCW */
-
- /* set this to 1 to suppress vsync irq use. */
- int novsync;
-
- /* blanking hook for platform. Set this if your platform can do
- * more than the LCDC in terms of blanking (e.g. disable clock
- * generator / backlight power supply / etc.
- */
- void (*blank) (int);
-};
-
-#endif /* _ASM_SH_SH7760FB_H */
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
deleted file mode 100644
index ab693b9824421d..00000000000000
--- a/arch/sh/include/asm/sh_bios.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BIOS_H
-#define __ASM_SH_BIOS_H
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-
-/*
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * C API to interface to the standard LinuxSH BIOS
- * usually from within the early stages of kernel boot.
- */
-extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_gdb_detach(void);
-
-extern void sh_bios_get_node_addr(unsigned char *node_addr);
-extern void sh_bios_shutdown(unsigned int how);
-
-extern void sh_bios_vbr_init(void);
-extern void sh_bios_vbr_reload(void);
-
-#else
-
-static inline void sh_bios_vbr_init(void) { }
-static inline void sh_bios_vbr_reload(void) { }
-
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h
deleted file mode 100644
index 6c580a644a78c6..00000000000000
--- a/arch/sh/include/asm/shmparam.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#ifndef __ASM_SH_SHMPARAM_H
-#define __ASM_SH_SHMPARAM_H
-
-/*
- * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
- * for everyone, and work out the specifics from the probed cache descriptor.
- */
-#define SHMLBA 0x4000 /* attach addr a multiple of this */
-
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h
deleted file mode 100644
index 35e4839d381e88..00000000000000
--- a/arch/sh/include/asm/siu.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * platform header for the SIU ASoC driver
- *
- * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#ifndef ASM_SIU_H
-#define ASM_SIU_H
-
-struct device;
-
-struct siu_platform {
- unsigned int dma_slave_tx_a;
- unsigned int dma_slave_rx_a;
- unsigned int dma_slave_tx_b;
- unsigned int dma_slave_rx_b;
-};
-
-#endif /* ASM_SIU_H */
diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
deleted file mode 100644
index 891f2f8f2fd03a..00000000000000
--- a/arch/sh/include/asm/smc37c93x.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMC37C93X_H
-#define __ASM_SH_SMC37C93X_H
-
-/*
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE 0x3f0
-#define IDE1_PRIMARY_BASE 0x1f0
-#define IDE1_SECONDARY_BASE 0x170
-#define PARPORT_PRIMARY_BASE 0x378
-#define COM1_PRIMARY_BASE 0x2f8
-#define COM2_PRIMARY_BASE 0x3f8
-#define RTC_PRIMARY_BASE 0x070
-#define KBC_PRIMARY_BASE 0x060
-#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
-
-/* Logical device number */
-#define LDN_FDC 0
-#define LDN_IDE1 1
-#define LDN_IDE2 2
-#define LDN_PARPORT 3
-#define LDN_COM1 4
-#define LDN_COM2 5
-#define LDN_RTC 6
-#define LDN_KBC 7
-#define LDN_AUXIO 8
-
-/* Configuration port and key */
-#define CONFIG_PORT 0x3f0
-#define INDEX_PORT CONFIG_PORT
-#define DATA_PORT 0x3f1
-#define CONFIG_ENTER 0x55
-#define CONFIG_EXIT 0xaa
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX 0x07
-#define POWER_CONTROL_INDEX 0x22
-#define ACTIVATE_INDEX 0x30
-#define IO_BASE_HI_INDEX 0x60
-#define IO_BASE_LO_INDEX 0x61
-#define IRQ_SELECT_INDEX 0x70
-#define DMA_SELECT_INDEX 0x74
-
-#define GPIO46_INDEX 0xc6
-#define GPIO47_INDEX 0xc7
-
-/* UART stuff. Only for debugging. */
-/* UART Register */
-
-#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
-#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
-#define UART_IER 0x2 /* Interrupt Enable Register */
-#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
-#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
-#define UART_LCR 0x6 /* Line Control Register */
-#define UART_MCR 0x8 /* MODEM Control Register */
-#define UART_LSR 0xa /* Line Status Register */
-#define UART_MSR 0xc /* MODEM Status Register */
-#define UART_SCR 0xe /* Scratch Register */
-#define UART_DLL 0x0 /* Divisor Latch (LS) */
-#define UART_DLM 0x2 /* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
- volatile __u16 rbr;
- volatile __u16 ier;
- volatile __u16 iir;
- volatile __u16 lcr;
- volatile __u16 mcr;
- volatile __u16 lsr;
- volatile __u16 msr;
- volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr rbr
-#define tcr iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll rbr
-#define dlm ier
-#define fcr iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
-#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
-#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
-#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
-#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
-#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
-#define IIR_FIFO 0xc000 /* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN 0x0100 /* FIFO enable */
-#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
-#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
-#define FCR_DMA 0x0800 /* DMA mode select */
-#define FCR_RTL 0x4000 /* Receiver trigger (LSB) */
-#define FCR_RTM 0x8000 /* Receiver trigger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
-#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
-#define LCR_STB 0x0400 /* Number of Stop Bits */
-#define LCR_PEN 0x0800 /* Parity Enable */
-#define LCR_EPS 0x1000 /* Even Parity Select */
-#define LCR_SP 0x2000 /* Stick Parity */
-#define LCR_SB 0x4000 /* Set Break */
-#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR 0x0100 /* Data Terminal Ready */
-#define MCR_RTS 0x0200 /* Request to Send */
-#define MCR_OUT1 0x0400 /* Out 1 */
-#define MCR_IRQEN 0x0800 /* IRQ Enable */
-#define MCR_LOOP 0x1000 /* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR 0x0100 /* Data Ready */
-#define LSR_OE 0x0200 /* Overrun Error */
-#define LSR_PE 0x0400 /* Parity Error */
-#define LSR_FE 0x0800 /* Framing Error */
-#define LSR_BI 0x1000 /* Break Interrupt */
-#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
-#define LSR_TEMT 0x4000 /* Transmitter Empty */
-#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS 0x0100 /* Delta Clear to Send */
-#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
-#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
-#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
-#define MSR_CTS 0x1000 /* Clear to Send */
-#define MSR_DSR 0x2000 /* Data Set Ready */
-#define MSR_RI 0x4000 /* Ring Indicator */
-#define MSR_DCD 0x8000 /* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK (1843200) /* 1.8432 MHz */
-#define UART_BAUD(x) (UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS 0
-#define RTC_SECONDS_ALARM 1
-#define RTC_MINUTES 2
-#define RTC_MINUTES_ALARM 3
-#define RTC_HOURS 4
-#define RTC_HOURS_ALARM 5
-#define RTC_DAY_OF_WEEK 6
-#define RTC_DAY_OF_MONTH 7
-#define RTC_MONTH 8
-#define RTC_YEAR 9
-#define RTC_FREQ_SELECT 10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only. */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL 11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif /* __ASM_SH_SMC37C93X_H */
diff --git a/arch/sh/include/asm/smp-ops.h b/arch/sh/include/asm/smp-ops.h
deleted file mode 100644
index e27702130eb6f3..00000000000000
--- a/arch/sh/include/asm/smp-ops.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_OPS_H
-#define __ASM_SH_SMP_OPS_H
-
-struct plat_smp_ops {
- void (*smp_setup)(void);
- unsigned int (*smp_processor_id)(void);
- void (*prepare_cpus)(unsigned int max_cpus);
- void (*start_cpu)(unsigned int cpu, unsigned long entry_point);
- void (*send_ipi)(unsigned int cpu, unsigned int message);
- int (*cpu_disable)(unsigned int cpu);
- void (*cpu_die)(unsigned int cpu);
- void (*play_dead)(void);
-};
-
-extern struct plat_smp_ops *mp_ops;
-extern struct plat_smp_ops shx3_smp_ops;
-
-#ifdef CONFIG_SMP
-
-static inline void plat_smp_setup(void)
-{
- BUG_ON(!mp_ops);
- mp_ops->smp_setup();
-}
-
-static inline void play_dead(void)
-{
- mp_ops->play_dead();
-}
-
-extern void register_smp_ops(struct plat_smp_ops *ops);
-
-#else
-
-static inline void plat_smp_setup(void)
-{
- /* UP, nothing to do ... */
-}
-
-static inline void register_smp_ops(struct plat_smp_ops *ops)
-{
-}
-
-static inline void play_dead(void)
-{
- BUG();
-}
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_OPS_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
deleted file mode 100644
index 199381f77293c7..00000000000000
--- a/arch/sh/include/asm/smp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SMP_H
-#define __ASM_SH_SMP_H
-
-#include <linux/bitops.h>
-#include <linux/cpumask.h>
-#include <asm/smp-ops.h>
-
-#ifdef CONFIG_SMP
-
-#include <linux/atomic.h>
-#include <asm/current.h>
-#include <asm/percpu.h>
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-/* Map from cpu id to sequential logical cpu number. */
-extern int __cpu_number_map[NR_CPUS];
-#define cpu_number_map(cpu) __cpu_number_map[cpu]
-
-/* The reverse map from sequential logical cpu number to cpu id. */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
-
-enum {
- SMP_MSG_FUNCTION,
- SMP_MSG_RESCHEDULE,
- SMP_MSG_FUNCTION_SINGLE,
- SMP_MSG_TIMER,
-
- SMP_MSG_NR, /* must be last */
-};
-
-DECLARE_PER_CPU(int, cpu_state);
-
-void smp_message_recv(unsigned int msg);
-
-void arch_send_call_function_single_ipi(int cpu);
-void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-void native_play_dead(void);
-void native_cpu_die(unsigned int cpu);
-int native_cpu_disable(unsigned int cpu);
-
-#ifdef CONFIG_HOTPLUG_CPU
-void play_dead_common(void);
-extern int __cpu_disable(void);
-
-static inline void __cpu_die(unsigned int cpu)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- mp_ops->cpu_die(cpu);
-}
-#endif
-
-static inline int hard_smp_processor_id(void)
-{
- extern struct plat_smp_ops *mp_ops; /* private */
-
- if (!mp_ops)
- return 0; /* boot CPU */
-
- return mp_ops->smp_processor_id();
-}
-
-struct of_cpu_method {
- const char *method;
- struct plat_smp_ops *ops;
-};
-
-#define CPU_METHOD_OF_DECLARE(name, _method, _ops) \
- static const struct of_cpu_method __cpu_method_of_table_##name \
- __used __section("__cpu_method_of_table") \
- = { .method = _method, .ops = _ops }
-
-#else
-
-#define hard_smp_processor_id() (0)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_H */
diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h
deleted file mode 100644
index 4703cbe2384481..00000000000000
--- a/arch/sh/include/asm/sparsemem.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPARSEMEM_H
-#define __ASM_SH_SPARSEMEM_H
-
-/*
- * SECTION_SIZE_BITS 2^N: how big each section will be
- * MAX_PHYSMEM_BITS 2^N: how much physical address space we have
- */
-#define SECTION_SIZE_BITS 26
-#define MAX_PHYSMEM_BITS 32
-
-#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h
deleted file mode 100644
index 6780753bd24914..00000000000000
--- a/arch/sh/include/asm/spi.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SPI_H__
-#define __ASM_SPI_H__
-
-struct sh_spi_info;
-
-struct sh_spi_info {
- int bus_num;
- int num_chipselect;
-
- void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
-};
-
-#endif /* __ASM_SPI_H__ */
diff --git a/arch/sh/include/asm/spinlock-cas.h b/arch/sh/include/asm/spinlock-cas.h
deleted file mode 100644
index 3d49985ebf41c9..00000000000000
--- a/arch/sh/include/asm/spinlock-cas.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-cas.h
- *
- * Copyright (C) 2015 SEI
- */
-#ifndef __ASM_SH_SPINLOCK_CAS_H
-#define __ASM_SH_SPINLOCK_CAS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-static inline unsigned __sl_cas(volatile unsigned *p, unsigned old, unsigned new)
-{
- __asm__ __volatile__("cas.l %1,%0,@r0"
- : "+r"(new)
- : "r"(old), "z"(p)
- : "t", "memory" );
- return new;
-}
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- while (!__sl_cas(&lock->lock, 1, 0));
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- __sl_cas(&lock->lock, 0, 1);
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- return __sl_cas(&lock->lock, 1, 0);
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (!old || __sl_cas(&rw->lock, old, old-1) != old);
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (__sl_cas(&rw->lock, old, old+1) != old);
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- while (__sl_cas(&rw->lock, RW_LOCK_BIAS, 0) != RW_LOCK_BIAS);
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __sl_cas(&rw->lock, 0, RW_LOCK_BIAS);
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned old;
- do old = rw->lock;
- while (old && __sl_cas(&rw->lock, old, old-1) != old);
- return !!old;
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- return __sl_cas(&rw->lock, RW_LOCK_BIAS, 0) == RW_LOCK_BIAS;
-}
-
-#endif /* __ASM_SH_SPINLOCK_CAS_H */
diff --git a/arch/sh/include/asm/spinlock-llsc.h b/arch/sh/include/asm/spinlock-llsc.h
deleted file mode 100644
index 7fd929cd2e7a08..00000000000000
--- a/arch/sh/include/asm/spinlock-llsc.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock-llsc.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_LLSC_H
-#define __ASM_SH_SPINLOCK_LLSC_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define arch_spin_is_locked(x) ((x)->lock <= 0)
-
-/*
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
- unsigned long oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_lock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "cmp/pl %1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- unsigned long tmp;
-
- /* This could be optimised with ARCH_HAS_MMIOWB */
- mmiowb();
- __asm__ __volatile__ (
- "mov #1, %0 ! arch_spin_unlock \n\t"
- "mov.l %0, @%1 \n\t"
- : "=&z" (tmp)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_spin_trylock \n\t"
- "mov %0, %1 \n\t"
- "mov #0, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&lock->lock)
- : "t", "memory"
- );
-
- return oldval;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_lock \n\t"
- "cmp/pl %0 \n\t"
- "bf 1b \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_read_unlock \n\t"
- "add #1, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned long tmp;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%1, %0 ! arch_write_lock \n\t"
- "cmp/hs %2, %0 \n\t"
- "bf 1b \n\t"
- "sub %2, %0 \n\t"
- "movco.l %0, @%1 \n\t"
- "bf 1b \n\t"
- : "=&z" (tmp)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- __asm__ __volatile__ (
- "mov.l %1, @%0 ! arch_write_unlock \n\t"
- :
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_read_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/pl %0 \n\t"
- "bf 2f \n\t"
- "add #-1, %0 \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "2: \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock)
- : "t", "memory"
- );
-
- return (oldval > 0);
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned long tmp, oldval;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "movli.l @%2, %0 ! arch_write_trylock \n\t"
- "mov %0, %1 \n\t"
- "cmp/hs %3, %0 \n\t"
- "bf 2f \n\t"
- "sub %3, %0 \n\t"
- "2: \n\t"
- "movco.l %0, @%2 \n\t"
- "bf 1b \n\t"
- "synco \n\t"
- : "=&z" (tmp), "=&r" (oldval)
- : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
- : "t", "memory"
- );
-
- return (oldval > (RW_LOCK_BIAS - 1));
-}
-
-#endif /* __ASM_SH_SPINLOCK_LLSC_H */
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
deleted file mode 100644
index fa6801f63551ce..00000000000000
--- a/arch/sh/include/asm/spinlock.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/spinlock.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- */
-#ifndef __ASM_SH_SPINLOCK_H
-#define __ASM_SH_SPINLOCK_H
-
-#if defined(CONFIG_CPU_SH4A)
-#include <asm/spinlock-llsc.h>
-#elif defined(CONFIG_CPU_J2)
-#include <asm/spinlock-cas.h>
-#else
-#error "The configured cpu type does not support spinlocks"
-#endif
-
-#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
deleted file mode 100644
index 907bda4b1619a9..00000000000000
--- a/arch/sh/include/asm/spinlock_types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SPINLOCK_TYPES_H
-#define __ASM_SH_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
- volatile unsigned int lock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { 1 }
-
-typedef struct {
- volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define RW_LOCK_BIAS 0x01000000
-#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-
-#endif
diff --git a/arch/sh/include/asm/sram.h b/arch/sh/include/asm/sram.h
deleted file mode 100644
index c125cf2198683e..00000000000000
--- a/arch/sh/include/asm/sram.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SRAM_H
-#define __ASM_SRAM_H
-
-#ifdef CONFIG_HAVE_SRAM_POOL
-
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-
-/* arch/sh/mm/sram.c */
-extern struct gen_pool *sram_pool;
-
-static inline unsigned long sram_alloc(size_t len)
-{
- if (!sram_pool)
- return 0UL;
-
- return gen_pool_alloc(sram_pool, len);
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
- return gen_pool_free(sram_pool, addr, len);
-}
-
-#else
-
-static inline unsigned long sram_alloc(size_t len)
-{
- return 0;
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
-}
-
-#endif /* CONFIG_HAVE_SRAM_POOL */
-
-#endif /* __ASM_SRAM_H */
diff --git a/arch/sh/include/asm/stackprotector.h b/arch/sh/include/asm/stackprotector.h
deleted file mode 100644
index 665dafac376f8d..00000000000000
--- a/arch/sh/include/asm/stackprotector.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STACKPROTECTOR_H
-#define __ASM_SH_STACKPROTECTOR_H
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
- unsigned long canary = get_random_canary();
-
- current->stack_canary = canary;
- __stack_chk_guard = current->stack_canary;
-}
-
-#endif /* __ASM_SH_STACKPROTECTOR_H */
diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
deleted file mode 100644
index 4f98cdc64ec59b..00000000000000
--- a/arch/sh/include/asm/stacktrace.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based on:
- * The x86 implementation - arch/x86/include/asm/stacktrace.h
- */
-#ifndef _ASM_SH_STACKTRACE_H
-#define _ASM_SH_STACKTRACE_H
-
-/* Generic stack tracer with callbacks */
-
-struct stacktrace_ops {
- void (*address)(void *data, unsigned long address, int reliable);
-};
-
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
- unsigned long *stack,
- const struct stacktrace_ops *ops, void *data);
-
-#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
deleted file mode 100644
index 0f6331ec28ed4e..00000000000000
--- a/arch/sh/include/asm/string.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/string_32.h>
diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h
deleted file mode 100644
index a276b193d3b4fd..00000000000000
--- a/arch/sh/include/asm/string_32.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STRING_H
-#define __ASM_SH_STRING_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * But consider these trivial functions to be public domain.
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char *strcpy(char *__dest, const char *__src)
-{
- register char *__xdest = __dest;
- unsigned long __dummy;
-
- __asm__ __volatile__("1:\n\t"
- "mov.b @%1+, %2\n\t"
- "mov.b %2, @%0\n\t"
- "cmp/eq #0, %2\n\t"
- "bf/s 1b\n\t"
- " add #1, %0\n\t"
- : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
- : "0" (__dest), "1" (__src)
- : "memory", "t");
-
- return __xdest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *__cs, const char *__ct)
-{
- register int __res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq #0, %3\n\t"
- "bt 2f\n\t"
- "cmp/eq %2, %3\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n\t"
- "sub %3, %2\n"
- "2:"
- : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
-{
- register int __res;
- unsigned long __dummy;
-
- if (__n == 0)
- return 0;
-
- __asm__ __volatile__(
- "mov.b @%1+, %3\n"
- "1:\n\t"
- "mov.b @%0+, %2\n\t"
- "cmp/eq %6, %0\n\t"
- "bt/s 2f\n\t"
- " cmp/eq #0, %3\n\t"
- "bt/s 3f\n\t"
- " cmp/eq %3, %2\n\t"
- "bt/s 1b\n\t"
- " mov.b @%1+, %3\n\t"
- "add #-2, %1\n\t"
- "mov.b @%1, %3\n"
- "2:\n\t"
- "sub %3, %2\n"
- "3:"
- :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
- : "0" (__cs), "1" (__ct), "r" (__cs+__n)
- : "t");
-
- return __res;
-}
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *__s, int __c, size_t __n);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#endif /* __ASM_SH_STRING_H */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
deleted file mode 100644
index 47db17520261e8..00000000000000
--- a/arch/sh/include/asm/suspend.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_SUSPEND_H
-#define _ASM_SH_SUSPEND_H
-
-#ifndef __ASSEMBLY__
-#include <linux/notifier.h>
-
-#include <asm/ptrace.h>
-
-struct swsusp_arch_regs {
- struct pt_regs user_regs;
- unsigned long bank1_regs[8];
-};
-
-void sh_mobile_call_standby(unsigned long mode);
-
-#ifdef CONFIG_CPU_IDLE
-int sh_mobile_setup_cpuidle(void);
-#else
-static inline int sh_mobile_setup_cpuidle(void) { return 0; }
-#endif
-
-/* notifier chains for pre/post sleep hooks */
-extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
-extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
-
-/* priority levels for notifiers */
-#define SH_MOBILE_SLEEP_BOARD 0
-#define SH_MOBILE_SLEEP_CPU 1
-#define SH_MOBILE_PRE(x) (x)
-#define SH_MOBILE_POST(x) (-(x))
-
-/* board code registration function for self-refresh assembly snippets */
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end);
-
-/* register structure for address/data information */
-struct sh_sleep_regs {
- unsigned long stbcr;
- unsigned long bar;
-
- /* MMU */
- unsigned long pteh;
- unsigned long ptel;
- unsigned long ttb;
- unsigned long tea;
- unsigned long mmucr;
- unsigned long ptea;
- unsigned long pascr;
- unsigned long irmcr;
-
- /* Cache */
- unsigned long ccr;
- unsigned long ramcr;
-};
-
-/* data area for low-level sleep code */
-struct sh_sleep_data {
- /* current sleep mode (SUSP_SH_...) */
- unsigned long mode;
-
- /* addresses of board specific self-refresh snippets */
- unsigned long sf_pre;
- unsigned long sf_post;
-
- /* address of resume code */
- unsigned long resume;
-
- /* register state saved and restored by the assembly code */
- unsigned long vbr;
- unsigned long spc;
- unsigned long sr;
- unsigned long sp;
-
- /* structure for keeping register addresses */
- struct sh_sleep_regs addr;
-
- /* structure for saving/restoring register state */
- struct sh_sleep_regs data;
-};
-
-/* a bitmap of supported sleep modes (SUSP_SH..) */
-extern unsigned long sh_mobile_sleep_supported;
-
-#endif
-
-/* flags passed to assembly suspend code */
-#define SUSP_SH_SLEEP (1 << 0) /* Regular sleep mode */
-#define SUSP_SH_STANDBY (1 << 1) /* SH-Mobile Software standby mode */
-#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */
-#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
-#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
-#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */
-#define SUSP_SH_REGS (1 << 6) /* Save/restore registers */
-
-#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h
deleted file mode 100644
index bd139bcdeec142..00000000000000
--- a/arch/sh/include/asm/switch_to.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <asm/switch_to_32.h>
diff --git a/arch/sh/include/asm/switch_to_32.h b/arch/sh/include/asm/switch_to_32.h
deleted file mode 100644
index 9c93fb91adb4aa..00000000000000
--- a/arch/sh/include/asm/switch_to_32.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SWITCH_TO_32_H
-#define __ASM_SH_SWITCH_TO_32_H
-
-#ifdef CONFIG_SH_DSP
-
-#define is_dsp_enabled(tsk) \
- (!!(tsk->thread.dsp_status.status & SR_DSP))
-
-#define __restore_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status; \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "movs.l @r2+, a0\n\t" \
- "movs.l @r2+, a1\n\t" \
- "movs.l @r2+, a0g\n\t" \
- "movs.l @r2+, a1g\n\t" \
- "movs.l @r2+, m0\n\t" \
- "movs.l @r2+, m1\n\t" \
- "movs.l @r2+, x0\n\t" \
- "movs.l @r2+, x1\n\t" \
- "movs.l @r2+, y0\n\t" \
- "movs.l @r2+, y1\n\t" \
- "lds.l @r2+, dsr\n\t" \
- "ldc.l @r2+, rs\n\t" \
- "ldc.l @r2+, re\n\t" \
- "ldc.l @r2+, mod\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#define __save_dsp(tsk) \
-do { \
- register u32 *__ts2 __asm__ ("r2") = \
- (u32 *)&tsk->thread.dsp_status + 14; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l mod, @-r2\n\t" \
- "stc.l re, @-r2\n\t" \
- "stc.l rs, @-r2\n\t" \
- "sts.l dsr, @-r2\n\t" \
- "movs.l y1, @-r2\n\t" \
- "movs.l y0, @-r2\n\t" \
- "movs.l x1, @-r2\n\t" \
- "movs.l x0, @-r2\n\t" \
- "movs.l m1, @-r2\n\t" \
- "movs.l m0, @-r2\n\t" \
- "movs.l a1g, @-r2\n\t" \
- "movs.l a0g, @-r2\n\t" \
- "movs.l a1, @-r2\n\t" \
- "movs.l a0, @-r2\n\t" \
- : : "r" (__ts2)); \
-} while (0)
-
-#else
-
-#define is_dsp_enabled(tsk) (0)
-#define __save_dsp(tsk) do { } while (0)
-#define __restore_dsp(tsk) do { } while (0)
-#endif
-
-struct task_struct *__switch_to(struct task_struct *prev,
- struct task_struct *next);
-
-/*
- * switch_to() should switch tasks to task nr n, first
- */
-#define switch_to(prev, next, last) \
-do { \
- register u32 *__ts1 __asm__ ("r1"); \
- register u32 *__ts2 __asm__ ("r2"); \
- register u32 *__ts4 __asm__ ("r4"); \
- register u32 *__ts5 __asm__ ("r5"); \
- register u32 *__ts6 __asm__ ("r6"); \
- register u32 __ts7 __asm__ ("r7"); \
- struct task_struct *__last; \
- \
- if (is_dsp_enabled(prev)) \
- __save_dsp(prev); \
- if (is_dsp_enabled(next)) \
- __restore_dsp(next); \
- \
- __ts1 = (u32 *)&prev->thread.sp; \
- __ts2 = (u32 *)&prev->thread.pc; \
- __ts4 = (u32 *)prev; \
- __ts5 = (u32 *)next; \
- __ts6 = (u32 *)&next->thread.sp; \
- __ts7 = next->thread.pc; \
- \
- __asm__ __volatile__ ( \
- ".balign 4\n\t" \
- "stc.l gbr, @-r15\n\t" \
- "sts.l pr, @-r15\n\t" \
- "mov.l r8, @-r15\n\t" \
- "mov.l r9, @-r15\n\t" \
- "mov.l r10, @-r15\n\t" \
- "mov.l r11, @-r15\n\t" \
- "mov.l r12, @-r15\n\t" \
- "mov.l r13, @-r15\n\t" \
- "mov.l r14, @-r15\n\t" \
- "mov.l r15, @r1\t! save SP\n\t" \
- "mov.l @r6, r15\t! change to new stack\n\t" \
- "mova 1f, %0\n\t" \
- "mov.l %0, @r2\t! save PC\n\t" \
- "mov.l 2f, %0\n\t" \
- "jmp @%0\t! call __switch_to\n\t" \
- " lds r7, pr\t! with return to new PC\n\t" \
- ".balign 4\n" \
- "2:\n\t" \
- ".long __switch_to\n" \
- "1:\n\t" \
- "mov.l @r15+, r14\n\t" \
- "mov.l @r15+, r13\n\t" \
- "mov.l @r15+, r12\n\t" \
- "mov.l @r15+, r11\n\t" \
- "mov.l @r15+, r10\n\t" \
- "mov.l @r15+, r9\n\t" \
- "mov.l @r15+, r8\n\t" \
- "lds.l @r15+, pr\n\t" \
- "ldc.l @r15+, gbr\n\t" \
- : "=z" (__last) \
- : "r" (__ts1), "r" (__ts2), "r" (__ts4), \
- "r" (__ts5), "r" (__ts6), "r" (__ts7) \
- : "r3", "t"); \
- \
- last = __last; \
-} while (0)
-
-#endif /* __ASM_SH_SWITCH_TO_32_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
deleted file mode 100644
index 570699eb0e58ae..00000000000000
--- a/arch/sh/include/asm/syscall.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_H
-#define __ASM_SH_SYSCALL_H
-
-extern const unsigned long sys_call_table[];
-
-#include <asm/syscall_32.h>
-
-#endif /* __ASM_SH_SYSCALL_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
deleted file mode 100644
index d87738eebe30cb..00000000000000
--- a/arch/sh/include/asm/syscall_32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_32_H
-#define __ASM_SH_SYSCALL_32_H
-
-#include <uapi/linux/audit.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <asm/ptrace.h>
-
-/* The system call number is given by the user in R3 */
-static inline long syscall_get_nr(struct task_struct *task,
- struct pt_regs *regs)
-{
- return (regs->tra >= 0) ? regs->regs[3] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
- struct pt_regs *regs)
-{
- /*
- * XXX: This needs some thought. On SH we don't
- * save away the original r0 value anywhere.
- */
-}
-
-static inline long syscall_get_error(struct task_struct *task,
- struct pt_regs *regs)
-{
- return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
- struct pt_regs *regs)
-{
- return regs->regs[0];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
- struct pt_regs *regs,
- int error, long val)
-{
- regs->regs[0] = (long) error ?: val;
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *args)
-{
-
- /* Argument pattern is: R4, R5, R6, R7, R0, R1 */
- args[5] = regs->regs[1];
- args[4] = regs->regs[0];
- args[3] = regs->regs[7];
- args[2] = regs->regs[6];
- args[1] = regs->regs[5];
- args[0] = regs->regs[4];
-}
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
- int arch = AUDIT_ARCH_SH;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- arch |= __AUDIT_ARCH_LE;
-#endif
- return arch;
-}
-#endif /* __ASM_SH_SYSCALL_32_H */
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
deleted file mode 100644
index 387105316d2882..00000000000000
--- a/arch/sh/include/asm/syscalls.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_H
-#define __ASM_SH_SYSCALLS_H
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off);
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-#include <asm/syscalls_32.h>
-
-#endif /* __ASM_SH_SYSCALLS_H */
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
deleted file mode 100644
index 5c555b864fe092..00000000000000
--- a/arch/sh/include/asm/syscalls_32.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_32_H
-#define __ASM_SH_SYSCALLS_32_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-struct pt_regs;
-
-asmlinkage int sys_sigreturn(void);
-asmlinkage int sys_rt_sigreturn(void);
-asmlinkage int sys_sh_pipe(void);
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos);
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice);
-
-/* Misc syscall related bits */
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags);
-
-#endif /* __ASM_SH_SYSCALLS_32_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
deleted file mode 100644
index 1400fbb8b423b9..00000000000000
--- a/arch/sh/include/asm/thread_info.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002 Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#include <asm/page.h>
-
-/*
- * Page fault error code bits
- */
-#define FAULT_CODE_WRITE (1 << 0) /* write access */
-#define FAULT_CODE_INITIAL (1 << 1) /* initial page write */
-#define FAULT_CODE_ITLB (1 << 2) /* ITLB miss */
-#define FAULT_CODE_PROT (1 << 3) /* protection fault */
-#define FAULT_CODE_USER (1 << 4) /* user-mode access */
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- unsigned long flags; /* low level flags */
- __u32 status; /* thread synchronous flags */
- __u32 cpu;
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- unsigned long previous_sp; /* sp of previous stack in case
- of nested IRQ stacks */
- __u8 supervisor_stack[];
-};
-
-#endif
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SHIFT 12
-#else
-#define THREAD_SHIFT 13
-#endif
-
-#define THREAD_SIZE (1 << THREAD_SHIFT)
-#define STACK_WARN (THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .flags = 0, \
- .status = 0, \
- .cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
-}
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-#if defined(CONFIG_CPU_HAS_SR_RB)
- __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti));
-#else
- unsigned long __dummy;
-
- __asm__ __volatile__ (
- "mov r15, %0\n\t"
- "and %1, %0\n\t"
- : "=&r" (ti), "=r" (__dummy)
- : "1" (~(THREAD_SIZE - 1))
- : "memory");
-#endif
-
- return ti;
-}
-
-#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
-
-extern void arch_task_cache_init(void);
-extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
-extern void arch_release_task_struct(struct task_struct *tsk);
-extern void init_thread_xstate(void);
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Thread information flags
- *
- * - Limited to 24 bits, upper byte used for fault code encoding.
- *
- * - _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or
- * we blow the tst immediate size constraints and need to fix up
- * arch/sh/kernel/entry-common.S.
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_NOTIFY_SIGNAL 3 /* signal notifications exist */
-#define TIF_SINGLESTEP 4 /* singlestepping active */
-#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
-#define TIF_SECCOMP 6 /* secure computing */
-#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */
-#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-
-/* work to do in syscall trace */
-#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
- _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
- _TIF_SYSCALL_TRACEPOINT)
-
-/* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
- _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
- _TIF_SYSCALL_TRACEPOINT | _TIF_NOTIFY_SIGNAL)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
- _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0002 /* FPU used by this task this quantum */
-
-#ifndef __ASSEMBLY__
-
-#define TI_FLAG_FAULT_CODE_SHIFT 24
-
-/*
- * Additional thread flag encoding
- */
-static inline void set_thread_fault_code(unsigned int val)
-{
- struct thread_info *ti = current_thread_info();
- ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
- | (val << TI_FLAG_FAULT_CODE_SHIFT);
-}
-
-static inline unsigned int get_thread_fault_code(void)
-{
- struct thread_info *ti = current_thread_info();
- return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
-}
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
deleted file mode 100644
index f53f95bf42887f..00000000000000
--- a/arch/sh/include/asm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/include/asm-sh/timex.h
- *
- * sh architecture timex specifications
- */
-#ifndef __ASM_SH_TIMEX_H
-#define __ASM_SH_TIMEX_H
-
-/*
- * Only parts using the legacy CPG code for their clock framework
- * implementation need to define their own Pclk value. If provided, this
- * can be used for accurately setting CLOCK_TICK_RATE, otherwise we
- * simply fall back on the i8253 PIT value.
- */
-#ifdef CONFIG_SH_PCLK_FREQ
-#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
-#else
-#define CLOCK_TICK_RATE 1193180
-#endif
-
-#include <asm-generic/timex.h>
-
-#endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
deleted file mode 100644
index aeb8915e925496..00000000000000
--- a/arch/sh/include/asm/tlb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLB_H
-#define __ASM_SH_TLB_H
-
-#ifndef __ASSEMBLY__
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#ifdef CONFIG_MMU
-#include <linux/swap.h>
-
-#if defined(CONFIG_CPU_SH4)
-extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
-extern void tlb_unwire_entry(void);
-#else
-static inline void tlb_wire_entry(struct vm_area_struct *vma ,
- unsigned long addr, pte_t pte)
-{
- BUG();
-}
-
-static inline void tlb_unwire_entry(void)
-{
- BUG();
-}
-#endif /* CONFIG_CPU_SH4 */
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_H */
diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h
deleted file mode 100644
index 8f180cd3bcd638..00000000000000
--- a/arch/sh/include/asm/tlbflush.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TLBFLUSH_H
-#define __ASM_SH_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- * - flush_tlb_all() flushes all processes TLBs
- * - flush_tlb_mm(mm) flushes the specified mm context TLB's
- * - flush_tlb_page(vma, vmaddr) flushes one page
- * - flush_tlb_range(vma, start, end) flushes a range of pages
- * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-extern void local_flush_tlb_all(void);
-extern void local_flush_tlb_mm(struct mm_struct *mm);
-extern void local_flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_page(struct vm_area_struct *vma,
- unsigned long page);
-extern void local_flush_tlb_kernel_range(unsigned long start,
- unsigned long end);
-extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
-
-extern void __flush_tlb_global(void);
-
-#ifdef CONFIG_SMP
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-extern void flush_tlb_one(unsigned long asid, unsigned long page);
-
-#else
-
-#define flush_tlb_all() local_flush_tlb_all()
-#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
-#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page)
-
-#define flush_tlb_range(vma, start, end) \
- local_flush_tlb_range(vma, start, end)
-
-#define flush_tlb_kernel_range(start, end) \
- local_flush_tlb_kernel_range(start, end)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
deleted file mode 100644
index 1db470e024565b..00000000000000
--- a/arch/sh/include/asm/topology.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_SH_TOPOLOGY_H
-#define _ASM_SH_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#define cpu_to_node(cpu) ((void)(cpu),0)
-
-#define cpumask_of_node(node) ((void)node, cpu_online_mask)
-
-#define pcibus_to_node(bus) ((void)(bus), -1)
-#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
- cpu_all_mask : \
- cpumask_of_node(pcibus_to_node(bus)))
-
-#endif
-
-#define mc_capable() (1)
-
-const struct cpumask *cpu_coregroup_mask(int cpu);
-
-extern cpumask_t cpu_core_map[NR_CPUS];
-
-#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h
deleted file mode 100644
index ba831bc7e08f5d..00000000000000
--- a/arch/sh/include/asm/traps.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_H
-#define __ASM_SH_TRAPS_H
-
-#include <linux/compiler.h>
-
-# include <asm/traps_32.h>
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(breakpoint);
-BUILD_TRAP_HANDLER(singlestep);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-BUILD_TRAP_HANDLER(nmi);
-
-#endif /* __ASM_SH_TRAPS_H */
diff --git a/arch/sh/include/asm/traps_32.h b/arch/sh/include/asm/traps_32.h
deleted file mode 100644
index 8c5bbb7b6053cf..00000000000000
--- a/arch/sh/include/asm/traps_32.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TRAPS_32_H
-#define __ASM_SH_TRAPS_32_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-
-#ifdef CONFIG_CPU_HAS_SR_RB
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- \
- __asm__ __volatile__ ( \
- "stc r2_bank, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#else
-#define lookup_exception_vector() \
-({ \
- unsigned long _vec; \
- __asm__ __volatile__ ( \
- "mov r4, %0\n\t" \
- : "=r" (_vec) \
- ); \
- \
- _vec; \
-})
-#endif
-
-static inline void trigger_address_error(void)
-{
- __asm__ __volatile__ (
- "ldc %0, sr\n\t"
- "mov.l @%1, %0"
- :
- : "r" (0x10000000), "r" (0x80000001)
- );
-}
-
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address);
-asmlinkage void do_divide_error(unsigned long r4);
-asmlinkage void do_reserved_inst(void);
-asmlinkage void do_illegal_slot_inst(void);
-asmlinkage void do_exception_error(void);
-
-#define BUILD_TRAP_HANDLER(name) \
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \
- unsigned long r6, unsigned long r7, \
- struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL \
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \
- unsigned int vec = regs->tra; \
- (void)vec;
-
-#endif /* __ASM_SH_TRAPS_32_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
deleted file mode 100644
index 68eb24ad201383..00000000000000
--- a/arch/sh/include/asm/types.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_TYPES_H
-#define __ASM_SH_TYPES_H
-
-#include <uapi/asm/types.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifndef __ASSEMBLY__
-
-typedef u16 insn_size_t;
-typedef u32 reg_size_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
deleted file mode 100644
index a79609eb14be43..00000000000000
--- a/arch/sh/include/asm/uaccess.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#include <asm/extable.h>
-#include <asm-generic/access_ok.h>
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err = -EFAULT; \
- unsigned long __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- if (likely(access_ok(__gu_addr, (size)))) \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
- (x) = (__force __typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- __chk_user_ptr(ptr); \
- __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
- __pu_err; \
-})
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
- if (likely(access_ok(__pu_addr, size))) \
- __put_user_size(__pu_val, __pu_addr, (size), \
- __pu_err); \
- __pu_err; \
-})
-
-# include <asm/uaccess_32.h>
-
-extern long strncpy_from_user(char *dest, const char __user *src, long count);
-
-extern __must_check long strnlen_user(const char __user *str, long n);
-
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-static __always_inline unsigned long
-raw_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-raw_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return __copy_user((__force void *)to, from, n);
-}
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure. Usually it's 0.)
- */
-__kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) \
-({ \
- void __user * __cl_addr = (addr); \
- unsigned long __cl_size = (n); \
- \
- if (__cl_size && access_ok(__cl_addr, __cl_size)) \
- __cl_size = __clear_user(__cl_addr, __cl_size); \
- \
- __cl_size; \
-})
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
- return set_exception_table_vec(evt >> 5, handler);
-}
-
-struct mem_access {
- unsigned long (*from)(void *dst, const void __user *src, unsigned long cnt);
- unsigned long (*to)(void __user *dst, const void *src, unsigned long cnt);
-};
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int, unsigned long address);
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
deleted file mode 100644
index 5d7ddc092afd77..00000000000000
--- a/arch/sh/include/asm/uaccess_32.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * Based on:
- * MIPS implementation version 1.15 by
- * Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- * and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __get_user_u64(x, ptr, retval); \
- break; \
- default: \
- __get_user_unknown(); \
- break; \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov." insn " %2, %1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0, %1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %1, %0\n\t" \
- : "=&r" (x) \
- : "m" (__m(addr)) \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-extern void __get_user_unknown(void);
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%R1\n\t" \
- "mov.l %T2,%S1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%R1\n\t" \
- "mov #0,%S1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#else
-#define __get_user_u64(x, addr, err) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %2,%S1\n\t" \
- "mov.l %T2,%R1\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov #0,%S1\n\t" \
- "mov #0,%R1\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".long 1b + 2, 3b\n\t" \
- ".previous" \
- :"=&r" (err), "=&r" (x) \
- :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-#endif
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b"); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w"); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l"); \
- break; \
- case 8: \
- __put_user_u64(x, ptr, retval); \
- break; \
- default: \
- __put_user_unknown(); \
- } \
-} while (0)
-
-#ifdef CONFIG_MMU
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "1:\n\t" \
- "mov." insn " %1, %2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f, %0\n\t" \
- "jmp @%0\n\t" \
- " mov %3, %0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \
- "0" (err) \
- : "memory" \
- ); \
-} while (0)
-#else
-#define __put_user_asm(x, addr, err, insn) \
-do { \
- __asm__ __volatile__ ( \
- "mov." insn " %0, %1\n\t" \
- : /* no outputs */ \
- : "r" (x), "m" (__m(addr)) \
- : "memory" \
- ); \
-} while (0)
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %R1,%2\n\t" \
- "mov.l %S1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
- "1:\n\t" \
- "mov.l %S1,%2\n\t" \
- "mov.l %R1,%T2\n\t" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\n\t" \
- "mov.l 4f,%0\n\t" \
- "jmp @%0\n\t" \
- " mov %3,%0\n\t" \
- ".balign 4\n" \
- "4: .long 2b\n\t" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n\t" \
- ".long 1b, 3b\n\t" \
- ".previous" \
- : "=r" (retval) \
- : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
- : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
deleted file mode 100644
index e7f68ec61014c3..00000000000000
--- a/arch/sh/include/asm/uncached.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UNCACHED_H
-#define __ASM_SH_UNCACHED_H
-
-#include <linux/bug.h>
-
-#ifdef CONFIG_UNCACHED_MAPPING
-extern unsigned long cached_to_uncached;
-extern unsigned long uncached_size;
-extern unsigned long uncached_start, uncached_end;
-
-extern int virt_addr_uncached(unsigned long kaddr);
-extern void uncached_init(void);
-extern void uncached_resize(unsigned long size);
-
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached() \
-do { \
- unsigned long __dummy; \
- \
- __asm__ __volatile__( \
- "mova 1f, %0\n\t" \
- "add %1, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1:" \
- : "=&z" (__dummy) \
- : "r" (cached_to_uncached)); \
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached() \
-do { \
- unsigned long __dummy; \
- ctrl_barrier(); \
- __asm__ __volatile__( \
- "mov.l 1f, %0\n\t" \
- "jmp @%0\n\t" \
- " nop\n\t" \
- ".balign 4\n" \
- "1: .long 2f\n" \
- "2:" \
- : "=&r" (__dummy)); \
-} while (0)
-#else
-#define virt_addr_uncached(kaddr) (0)
-#define uncached_init() do { } while (0)
-#define uncached_resize(size) BUG()
-#define jump_to_uncached() do { } while (0)
-#define back_to_cached() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
deleted file mode 100644
index d6e1262501368a..00000000000000
--- a/arch/sh/include/asm/unistd.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd_32.h>
-
-#define NR_syscalls __NR_syscalls
-
-# define __ARCH_WANT_NEW_STAT
-# define __ARCH_WANT_OLD_READDIR
-# define __ARCH_WANT_OLD_STAT
-# define __ARCH_WANT_STAT64
-# define __ARCH_WANT_SYS_ALARM
-# define __ARCH_WANT_SYS_GETHOSTNAME
-# define __ARCH_WANT_SYS_IPC
-# define __ARCH_WANT_SYS_PAUSE
-# define __ARCH_WANT_SYS_SIGNAL
-# define __ARCH_WANT_SYS_TIME32
-# define __ARCH_WANT_SYS_UTIME32
-# define __ARCH_WANT_SYS_WAITPID
-# define __ARCH_WANT_SYS_SOCKETCALL
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLD_UNAME
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_SYS_FORK
-# define __ARCH_WANT_SYS_VFORK
-# define __ARCH_WANT_SYS_CLONE
-
-#include <uapi/asm/unistd.h>
diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
deleted file mode 100644
index ce82c96c789904..00000000000000
--- a/arch/sh/include/asm/unwinder.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_UNWINDER_H
-#define _LINUX_UNWINDER_H
-
-#include <asm/stacktrace.h>
-
-struct unwinder {
- const char *name;
- struct list_head list;
- int rating;
- void (*dump)(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *, void *);
-};
-
-extern int unwinder_init(void);
-extern int unwinder_register(struct unwinder *);
-
-extern void unwind_stack(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
- unsigned long *, const struct stacktrace_ops *,
- void *);
-
-/*
- * Used by fault handling code to signal to the unwinder code that it
- * should switch to a different unwinder.
- */
-extern int unwinder_faulted;
-
-#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
deleted file mode 100644
index 12ea0f3f441991..00000000000000
--- a/arch/sh/include/asm/user.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_USER_H
-#define __ASM_SH_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd). The file contents are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-
-struct user_fpu_struct {
- unsigned long fp_regs[16];
- unsigned long xfp_regs[16];
- unsigned long fpscr;
- unsigned long fpul;
-};
-
-struct user {
- struct pt_regs regs; /* entire machine state */
- struct user_fpu_struct fpu; /* Math Co-processor registers */
- int u_fpvalid; /* True if math co-processor being used */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#endif /* __ASM_SH_USER_H */
diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h
deleted file mode 100644
index 5b2057c39170ed..00000000000000
--- a/arch/sh/include/asm/vermagic.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef _ASM_VERMAGIC_H
-#define _ASM_VERMAGIC_H
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2LE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3LE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4LE "
-# else
-# error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2BE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3BE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4BE "
-# else
-# error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
-#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h
deleted file mode 100644
index 089fbdc6c0b1d0..00000000000000
--- a/arch/sh/include/asm/vga.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VGA_H
-#define __ASM_SH_VGA_H
-
-/* Stupid drivers. */
-
-#endif /* __ASM_SH_VGA_H */
diff --git a/arch/sh/include/asm/vmalloc.h b/arch/sh/include/asm/vmalloc.h
deleted file mode 100644
index 716b7747264658..00000000000000
--- a/arch/sh/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_SH_VMALLOC_H
-#define _ASM_SH_VMALLOC_H
-
-#endif /* _ASM_SH_VMALLOC_H */
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
deleted file mode 100644
index 8d96c4f9b35b88..00000000000000
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_VMLINUX_LDS_H
-#define __ASM_SH_VMLINUX_LDS_H
-
-#include <asm-generic/vmlinux.lds.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-#define DWARF_EH_FRAME \
- .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { \
- __start_eh_frame = .; \
- *(.eh_frame) \
- __stop_eh_frame = .; \
- }
-#else
-#define DWARF_EH_FRAME
-#endif
-
-#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
deleted file mode 100644
index b9ca4c99f046a6..00000000000000
--- a/arch/sh/include/asm/watchdog.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Valentin Sitdikov
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#define WTCNT_HIGH 0x5a
-#define WTCSR_HIGH 0xa5
-
-#define WTCSR_CKS2 0x04
-#define WTCSR_CKS1 0x02
-#define WTCSR_CKS0 0x01
-
-#include <cpu/watchdog.h>
-
-/*
- * See cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-# define WTCNT_R WTCNT
-#endif
-
-#ifndef WTCSR_R
-# define WTCSR_R WTCSR
-#endif
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio Overflow Period
- * --------------------------------------------
- * 1/32 (initial value) 41 usecs
- * 1/64 82 usecs
- * 1/128 164 usecs
- * 1/256 328 usecs
- * 1/512 656 usecs
- * 1/1024 1.31 msecs
- * 1/2048 2.62 msecs
- * 1/4096 5.25 msecs
- */
-#define WTCSR_CKS_32 0x00
-#define WTCSR_CKS_64 0x01
-#define WTCSR_CKS_128 0x02
-#define WTCSR_CKS_256 0x03
-#define WTCSR_CKS_512 0x04
-#define WTCSR_CKS_1024 0x05
-#define WTCSR_CKS_2048 0x06
-#define WTCSR_CKS_4096 0x07
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u32 sh_wdt_read_cnt(void)
-{
- return __raw_readl(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u32 val)
-{
- __raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
-}
-
-/**
- * sh_wdt_write_bst - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_bst(__u32 val)
-{
- __raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
-}
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u32 sh_wdt_read_csr(void)
-{
- return __raw_readl(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u32 val)
-{
- __raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
-}
-#else
-/**
- * sh_wdt_read_cnt - Read from Counter
- * Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
- return __raw_readb(WTCNT_R);
-}
-
-/**
- * sh_wdt_write_cnt - Write to Counter
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the timer counter.
- * The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
- __raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- * sh_wdt_read_csr - Read from Control/Status Register
- *
- * Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
- return __raw_readb(WTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Control/Status Register
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
- __raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
deleted file mode 100644
index 4aa398455b94ab..00000000000000
--- a/arch/sh/include/asm/word-at-a-time.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_WORD_AT_A_TIME_H
-#define __ASM_SH_WORD_AT_A_TIME_H
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-# include <asm-generic/word-at-a-time.h>
-#else
-/*
- * Little-endian version cribbed from x86.
- */
-struct word_at_a_time {
- const unsigned long one_bits, high_bits;
-};
-
-#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
-
-/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
-static inline long count_masked_bytes(long mask)
-{
- /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
- long a = (0x0ff0001+mask) >> 23;
- /* Fix the 1 for 00 case */
- return a & mask;
-}
-
-/* Return nonzero if it has a zero */
-static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
-{
- unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
- *bits = mask;
- return mask;
-}
-
-static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
-{
- return bits;
-}
-
-static inline unsigned long create_zero_mask(unsigned long bits)
-{
- bits = (bits - 1) & ~bits;
- return bits >> 7;
-}
-
-/* The mask we created is directly usable as a bytemask */
-#define zero_bytemask(mask) (mask)
-
-static inline unsigned long find_zero(unsigned long mask)
-{
- return count_masked_bytes(mask);
-}
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
deleted file mode 100644
index d8bf5d7d2fdf0a..00000000000000
--- a/arch/sh/include/cpu-common/cpu/addrspace.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Definitions for the address spaces of the SH-2 CPUs.
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_ADDRSPACE_H
-#define __ASM_CPU_SH2_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
deleted file mode 100644
index cef3a30dbf97c8..00000000000000
--- a/arch/sh/include/cpu-common/cpu/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/mmu_context.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
-#define __ASM_CPU_SH2_MMU_CONTEXT_H
-
-/* No MMU */
-
-#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-common/cpu/pfc.h b/arch/sh/include/cpu-common/cpu/pfc.h
deleted file mode 100644
index 879d2c9da537fa..00000000000000
--- a/arch/sh/include/cpu-common/cpu/pfc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#ifndef __ARCH_SH_CPU_PFC_H__
-#define __ARCH_SH_CPU_PFC_H__
-
-#include <linux/types.h>
-
-struct resource;
-
-int sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources);
-
-#endif /* __ARCH_SH_CPU_PFC_H__ */
diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
deleted file mode 100644
index 5fe726acd9f8f5..00000000000000
--- a/arch/sh/include/cpu-common/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2_RTC_H
-#define __ASM_SH_CPU_SH2_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES 0UL
-
-#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
deleted file mode 100644
index e005dd176ff211..00000000000000
--- a/arch/sh/include/cpu-common/cpu/sigcontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
-#define __ASM_CPU_SH2_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
deleted file mode 100644
index af51438755e003..00000000000000
--- a/arch/sh/include/cpu-common/cpu/timer.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH2_TIMER_H
-#define __ASM_CPU_SH2_TIMER_H
-
-/* Nothing needed yet */
-
-#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
deleted file mode 100644
index 070aa9f50d3f09..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/cache.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_CACHE_H
-#define __ASM_CPU_SH2_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define SH_CCR 0xffffffec
-
-#define CCR_CACHE_CE 0x01 /* Cache enable */
-#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */
- /* 0x00000000-0x7fffffff: Write-through */
- /* 0x80000000-0x9fffffff: Write-back */
- /* 0xc0000000-0xdfffffff: Write-through */
-#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */
- /* 0x00000000-0x7fffffff: Write-back */
- /* 0x80000000-0x9fffffff: Write-through */
- /* 0xc0000000-0xdfffffff: Write-back */
-#define CCR_CACHE_CF 0x08 /* Cache invalidate */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_DATA_ARRAY 0xf1000000
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif
-
-#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
deleted file mode 100644
index fb2e5d2831bc76..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/freq.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2_FREQ_H
-#define __ASM_CPU_SH2_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define FREQCR 0xf815ff80
-#endif
-
-#endif /* __ASM_CPU_SH2_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
deleted file mode 100644
index 141fe296d75168..00000000000000
--- a/arch/sh/include/cpu-sh2/cpu/watchdog.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2_WATCHDOG_H
-#define __ASM_CPU_SH2_WATCHDOG_H
-
-/*
- * More SH-2 brilliance .. its not good enough that we can't read
- * and write the same sizes to WTCNT, now we have to read and write
- * with different sizes at different addresses for WTCNT _and_ RSTCSR.
- *
- * At least on the bright side no one has managed to screw over WTCSR
- * in this fashion .. yet.
- */
-/* Register definitions */
-#define WTCNT 0xfffffe80
-#define WTCSR 0xfffffe80
-#define RSTCSR 0xfffffe82
-
-#define WTCNT_R (WTCNT + 1)
-#define RSTCSR_R (RSTCSR + 1)
-
-/* Bit definitions */
-#define WTCSR_IOVF 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_TME 0x20
-#define WTCSR_RSTS 0x00
-
-#define RSTCSR_RSTS 0x20
-
-/**
- * sh_wdt_read_rstcsr - Read from Reset Control/Status Register
- *
- * Reads back the RSTCSR value.
- */
-static inline __u8 sh_wdt_read_rstcsr(void)
-{
- /*
- * Same read/write brain-damage as for WTCNT here..
- */
- return __raw_readb(RSTCSR_R);
-}
-
-/**
- * sh_wdt_write_csr - Write to Reset Control/Status Register
- *
- * @val: Value to write
- *
- * Writes the given value @val to the lower byte of the control/status
- * register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_rstcsr(__u8 val)
-{
- /*
- * Note: Due to the brain-damaged nature of this register,
- * we can't presently touch the WOVF bit, since the upper byte
- * has to be swapped for this. So just leave it alone..
- */
- __raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
-}
-
-#endif /* __ASM_CPU_SH2_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
deleted file mode 100644
index 3afa46c09fb531..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/addrspace.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x00000000
-#define P2SEG 0x20000000
-#define P3SEG 0x40000000
-#define P4SEG 0x60000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
deleted file mode 100644
index 06efb233eb35f4..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/cache.h
- *
- * Copyright (C) 2004 Paul Mundt
- */
-#ifndef __ASM_CPU_SH2A_CACHE_H
-#define __ASM_CPU_SH2A_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xfffc1000 /* CCR1 */
-#define SH_CCR2 0xfffc1004
-
-/*
- * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
- * listed here are reserved.
- */
-#define CCR_CACHE_CB 0x0000 /* Hack */
-#define CCR_CACHE_OCE 0x0001
-#define CCR_CACHE_WT 0x0002
-#define CCR_CACHE_OCI 0x0008 /* OCF */
-#define CCR_CACHE_ICE 0x0100
-#define CCR_CACHE_ICI 0x0800 /* ICF */
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf0800000
-
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI)
-#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI
-#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
deleted file mode 100644
index fb0813f47043ea..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/freq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh2a/freq.h
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-#ifndef __ASM_CPU_SH2A_FREQ_H
-#define __ASM_CPU_SH2A_FREQ_H
-
-#define FREQCR 0xfffe0010
-
-#endif /* __ASM_CPU_SH2A_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
deleted file mode 100644
index 6b6c7ee752debf..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH2A_RTC_H
-#define __ASM_SH_CPU_SH2A_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7203.h b/arch/sh/include/cpu-sh2a/cpu/sh7203.h
deleted file mode 100644
index f250adfa46c626..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7203.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7203_H__
-#define __ASM_SH7203_H__
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC14, GPIO_PC13, GPIO_PC12,
- GPIO_PC11, GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE15, GPIO_PE14, GPIO_PE13, GPIO_PE12,
- GPIO_PE11, GPIO_PE10, GPIO_PE9, GPIO_PE8,
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF30, GPIO_PF29, GPIO_PF28,
- GPIO_PF27, GPIO_PF26, GPIO_PF25, GPIO_PF24,
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PB, GPIO_FN_PINT6_PB, GPIO_FN_PINT5_PB, GPIO_FN_PINT4_PB,
- GPIO_FN_PINT3_PB, GPIO_FN_PINT2_PB, GPIO_FN_PINT1_PB, GPIO_FN_PINT0_PB,
- GPIO_FN_PINT7_PD, GPIO_FN_PINT6_PD, GPIO_FN_PINT5_PD, GPIO_FN_PINT4_PD,
- GPIO_FN_PINT3_PD, GPIO_FN_PINT2_PD, GPIO_FN_PINT1_PD, GPIO_FN_PINT0_PD,
- GPIO_FN_IRQ7_PB, GPIO_FN_IRQ6_PB, GPIO_FN_IRQ5_PB, GPIO_FN_IRQ4_PB,
- GPIO_FN_IRQ3_PB, GPIO_FN_IRQ2_PB, GPIO_FN_IRQ1_PB, GPIO_FN_IRQ0_PB,
- GPIO_FN_IRQ7_PD, GPIO_FN_IRQ6_PD, GPIO_FN_IRQ5_PD, GPIO_FN_IRQ4_PD,
- GPIO_FN_IRQ3_PD, GPIO_FN_IRQ2_PD, GPIO_FN_IRQ1_PD, GPIO_FN_IRQ0_PD,
- GPIO_FN_IRQ7_PE, GPIO_FN_IRQ6_PE, GPIO_FN_IRQ5_PE, GPIO_FN_IRQ4_PE,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- GPIO_FN_WDTOVF, GPIO_FN_IRQOUT, GPIO_FN_REFOUT, GPIO_FN_IRQOUT_REFOUT,
- GPIO_FN_UBCTRG,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* IIC3 */
- GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1,
- GPIO_FN_SDA0, GPIO_FN_SCL0,
-
- /* DMAC */
- GPIO_FN_TEND0_PD, GPIO_FN_TEND0_PE, GPIO_FN_DACK0_PD,
- GPIO_FN_DACK0_PE, GPIO_FN_DREQ0_PD, GPIO_FN_DREQ0_PE,
- GPIO_FN_TEND1_PD, GPIO_FN_TEND1_PE, GPIO_FN_DACK1_PD,
- GPIO_FN_DACK1_PE, GPIO_FN_DREQ1_PD, GPIO_FN_DREQ1_PE,
- GPIO_FN_DACK2, GPIO_FN_DREQ2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3,
-
- /* ADC */
- GPIO_FN_ADTRG_PD, GPIO_FN_ADTRG_PE,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_CS4, GPIO_FN_MRES, GPIO_FN_BS,
- GPIO_FN_IOIS16, GPIO_FN_CS1, GPIO_FN_CS6_CE1B,
- GPIO_FN_CE2B, GPIO_FN_CS5_CE1A, GPIO_FN_CE2A,
- GPIO_FN_FRAME, GPIO_FN_WAIT, GPIO_FN_RDWR,
- GPIO_FN_CKE, GPIO_FN_CASU, GPIO_FN_BREQ, GPIO_FN_RASU,
- GPIO_FN_BACK, GPIO_FN_CASL, GPIO_FN_RASL,
- GPIO_FN_WE3_DQMUU_AH_ICIO_WR, GPIO_FN_WE2_DQMUL_ICIORD,
- GPIO_FN_WE1_DQMLU_WE, GPIO_FN_WE0_DQMLL,
- GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_A1, GPIO_FN_A0, GPIO_FN_CS7,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD_PD, GPIO_FN_TCLKC_PD, GPIO_FN_TCLKB_PD, GPIO_FN_TCLKA_PD,
- GPIO_FN_TCLKD_PF, GPIO_FN_TCLKC_PF, GPIO_FN_TCLKB_PF, GPIO_FN_TCLKA_PF,
-
- /* SSU */
- GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
- GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
- GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
- GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
-
- /* SCIF */
- GPIO_FN_TXD0, GPIO_FN_RXD0, GPIO_FN_SCK0,
- GPIO_FN_TXD1, GPIO_FN_RXD1, GPIO_FN_SCK1,
- GPIO_FN_TXD2, GPIO_FN_RXD2, GPIO_FN_SCK2,
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3, GPIO_FN_SCK3,
-
- /* SSI */
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_SSIDATA3, GPIO_FN_SSIWS3, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA2, GPIO_FN_SSIWS2, GPIO_FN_SSISCK2,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIWS1, GPIO_FN_SSISCK1,
- GPIO_FN_SSIDATA0, GPIO_FN_SSIWS0, GPIO_FN_SSISCK0,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_FRB,
- GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0,
- GPIO_FN_FSC, GPIO_FN_FOE, GPIO_FN_FCDE, GPIO_FN_FWE,
-
- /* LCDC */
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_M_DISP, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_DON,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
-};
-
-#endif /* __ASM_SH7203_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/arch/sh/include/cpu-sh2a/cpu/sh7264.h
deleted file mode 100644
index 8a1338aaf10a5c..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7264.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7264_H__
-#define __ASM_SH7264_H__
-
-enum {
- /* Port A */
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC10, GPIO_PC9, GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* Port K */
- GPIO_PK11, GPIO_PK10, GPIO_PK9, GPIO_PK8,
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* INTC: IRQ and PINT on PB/PD/PE */
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG,
-
- GPIO_FN_IRQ7_PC, GPIO_FN_IRQ6_PC, GPIO_FN_IRQ5_PC, GPIO_FN_IRQ4_PC,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ3_PE, GPIO_FN_IRQ2_PE, GPIO_FN_IRQ1_PE, GPIO_FN_IRQ0_PE,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
-
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS6CE1B, GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_ICIOWRAH, GPIO_FN_ICIORD,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_SCK1, GPIO_FN_SCK2, GPIO_FN_SCK3,
- GPIO_FN_RXD0, GPIO_FN_RXD1, GPIO_FN_RXD2, GPIO_FN_RXD3,
- GPIO_FN_TXD0, GPIO_FN_TXD1, GPIO_FN_TXD2, GPIO_FN_TXD3,
- GPIO_FN_RXD4, GPIO_FN_RXD5, GPIO_FN_RXD6, GPIO_FN_RXD7,
- GPIO_FN_TXD4, GPIO_FN_TXD5, GPIO_FN_TXD6, GPIO_FN_TXD7,
- GPIO_FN_RTS1, GPIO_FN_RTS3, GPIO_FN_CTS1, GPIO_FN_CTS3,
-
- /* RSPI */
- GPIO_FN_RSPCK0, GPIO_FN_MOSI0,
- GPIO_FN_MISO0_PF12, GPIO_FN_MISO1,
- GPIO_FN_SSL00,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1_PG19, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC3 */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6, GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2, GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7264_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
deleted file mode 100644
index fece521c74b30d..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7269_H__
-#define __ASM_SH7269_H__
-
-enum {
- /* Port A */
- GPIO_PA1, GPIO_PA0,
-
- /* Port B */
- GPIO_PB22, GPIO_PB21, GPIO_PB20,
- GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
- GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
- GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1,
-
- /* Port C */
- GPIO_PC8,
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* Port D */
- GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
- GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* Port E */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* Port F */
- GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
- GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
- GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
- GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* Port G */
- GPIO_PG27, GPIO_PG26, GPIO_PG25, GPIO_PG24,
- GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
- GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
- GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
- GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- GPIO_PJ31, GPIO_PJ30, GPIO_PJ29, GPIO_PJ28,
- GPIO_PJ27, GPIO_PJ26, GPIO_PJ25, GPIO_PJ24,
- GPIO_PJ23, GPIO_PJ22, GPIO_PJ21, GPIO_PJ20,
- GPIO_PJ19, GPIO_PJ18, GPIO_PJ17, GPIO_PJ16,
- GPIO_PJ15, GPIO_PJ14, GPIO_PJ13, GPIO_PJ12,
- GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* INTC: IRQ and PINT */
- GPIO_FN_IRQ7_PG, GPIO_FN_IRQ6_PG, GPIO_FN_IRQ5_PG, GPIO_FN_IRQ4_PG,
- GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PG, GPIO_FN_IRQ0_PG,
- GPIO_FN_IRQ7_PF, GPIO_FN_IRQ6_PF, GPIO_FN_IRQ5_PF, GPIO_FN_IRQ4_PF,
- GPIO_FN_IRQ3_PJ, GPIO_FN_IRQ2_PJ, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
- GPIO_FN_IRQ1_PC, GPIO_FN_IRQ0_PC,
-
- GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
- GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG, GPIO_FN_PINT0_PG,
- GPIO_FN_PINT7_PH, GPIO_FN_PINT6_PH, GPIO_FN_PINT5_PH, GPIO_FN_PINT4_PH,
- GPIO_FN_PINT3_PH, GPIO_FN_PINT2_PH, GPIO_FN_PINT1_PH, GPIO_FN_PINT0_PH,
- GPIO_FN_PINT7_PJ, GPIO_FN_PINT6_PJ, GPIO_FN_PINT5_PJ, GPIO_FN_PINT4_PJ,
- GPIO_FN_PINT3_PJ, GPIO_FN_PINT2_PJ, GPIO_FN_PINT1_PJ, GPIO_FN_PINT0_PJ,
-
- /* WDT */
- GPIO_FN_WDTOVF,
-
- /* CAN */
- GPIO_FN_CTX2, GPIO_FN_CRX2,
- GPIO_FN_CTX1, GPIO_FN_CRX1,
- GPIO_FN_CTX0, GPIO_FN_CRX0,
- GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
- GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
- GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
- GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
- GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
-
- /* DMAC */
- GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
-
- /* ADC */
- GPIO_FN_ADTRG,
-
- /* BSC */
- GPIO_FN_A25, GPIO_FN_A24,
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- GPIO_FN_BS,
- GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
- GPIO_FN_CS5CE1A,
- GPIO_FN_CE2A, GPIO_FN_CE2B,
- GPIO_FN_RD, GPIO_FN_RDWR,
- GPIO_FN_WE3ICIOWRAHDQMUU, GPIO_FN_WE2ICIORDDQMUL,
- GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
- GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
- GPIO_FN_IOIS16,
-
- /* TMU */
- GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
- GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
- GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
- GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
- GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
-
- /* SCIF */
- GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
- GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
- GPIO_FN_SCK2, GPIO_FN_RXD2, GPIO_FN_TXD2,
- GPIO_FN_SCK3, GPIO_FN_RXD3, GPIO_FN_TXD3,
- GPIO_FN_SCK4, GPIO_FN_RXD4, GPIO_FN_TXD4,
- GPIO_FN_SCK5, GPIO_FN_RXD5, GPIO_FN_TXD5, GPIO_FN_RTS5, GPIO_FN_CTS5,
- GPIO_FN_SCK6, GPIO_FN_RXD6, GPIO_FN_TXD6,
- GPIO_FN_SCK7, GPIO_FN_RXD7, GPIO_FN_TXD7, GPIO_FN_RTS7, GPIO_FN_CTS7,
-
- /* RSPI */
- GPIO_FN_MISO0_PJ19, GPIO_FN_MISO0_PB20,
- GPIO_FN_MOSI0_PJ18, GPIO_FN_MOSI0_PB19,
- GPIO_FN_SSL00_PJ17, GPIO_FN_SSL00_PB18,
- GPIO_FN_RSPCK0_PJ16, GPIO_FN_RSPCK0_PB17,
- GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
- GPIO_FN_MISO1, GPIO_FN_SSL10,
-
- /* IIC3 */
- GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
- GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
-
- /* SSI */
- GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
- GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
- GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
- GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
- GPIO_FN_AUDIO_CLK,
- GPIO_FN_AUDIO_XOUT,
-
- /* SIOF */
- GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
-
- /* SPDIF */
- GPIO_FN_SPDIF_IN,
- GPIO_FN_SPDIF_OUT,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN_FCE,
- GPIO_FN_FRB,
-
- /* VDC */
- GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
- GPIO_FN_DV_DATA23, GPIO_FN_DV_DATA22,
- GPIO_FN_DV_DATA21, GPIO_FN_DV_DATA20,
- GPIO_FN_DV_DATA19, GPIO_FN_DV_DATA18,
- GPIO_FN_DV_DATA17, GPIO_FN_DV_DATA16,
- GPIO_FN_DV_DATA15, GPIO_FN_DV_DATA14,
- GPIO_FN_DV_DATA13, GPIO_FN_DV_DATA12,
- GPIO_FN_DV_DATA11, GPIO_FN_DV_DATA10,
- GPIO_FN_DV_DATA9, GPIO_FN_DV_DATA8,
- GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6,
- GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
- GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2,
- GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
- GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
- GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
- GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22,
- GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20,
- GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18,
- GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16,
- GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14,
- GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12,
- GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10,
- GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8,
- GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6,
- GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4,
- GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2,
- GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0,
- GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22,
- GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20,
- GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18,
- GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16,
- GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14,
- GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12,
- GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10,
- GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8,
- GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6,
- GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4,
- GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2,
- GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0,
- GPIO_FN_LCD_M_DISP,
-};
-
-#endif /* __ASM_SH7269_H__ */
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
deleted file mode 100644
index 8f932b733c6748..00000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/watchdog.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <cpu-sh2/cpu/watchdog.h>
diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
deleted file mode 100644
index 2ee206c9bf1aa8..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/adc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_ADC_H
-#define __ASM_CPU_SH3_ADC_H
-
-/*
- * Copyright (C) 2004 Andriy Skulysh
- */
-
-
-#define ADDRAH 0xa4000080
-#define ADDRAL 0xa4000082
-#define ADDRBH 0xa4000084
-#define ADDRBL 0xa4000086
-#define ADDRCH 0xa4000088
-#define ADDRCL 0xa400008a
-#define ADDRDH 0xa400008c
-#define ADDRDL 0xa400008e
-#define ADCSR 0xa4000090
-
-#define ADCSR_ADF 0x80
-#define ADCSR_ADIE 0x40
-#define ADCSR_ADST 0x20
-#define ADCSR_MULTI 0x10
-#define ADCSR_CKS 0x08
-#define ADCSR_CH_MASK 0x07
-
-#define ADCR 0xa4000092
-
-#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
deleted file mode 100644
index f571248269430c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_CACHE_H
-#define __ASM_CPU_SH3_CACHE_H
-
-#define L1_CACHE_SHIFT 4
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xffffffec /* Address of Cache Control Register */
-
-#define CCR_CACHE_CE 0x01 /* Cache Enable */
-#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */
-#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */
-#define CCR_CACHE_CF 0x08 /* Cache Flush */
-#define CCR_CACHE_ORA 0x20 /* RAM mode */
-
-#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_PHYSADDR_MASK 0x1ffffc00
-
-#define CCR_CACHE_ENABLE CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3_REG 0xa40000b4
-#define CCR_CACHE_16KB 0x00010000
-#define CCR_CACHE_32KB 0x00020000
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
deleted file mode 100644
index fd02331608a8d6..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dac.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DAC_H
-#define __ASM_CPU_SH3_DAC_H
-
-/*
- * Copyright (C) 2003 Andriy Skulysh
- */
-
-
-#define DADR0 0xa40000a0
-#define DADR1 0xa40000a2
-#define DACR 0xa40000a4
-#define DACR_DAOE1 0x80
-#define DACR_DAOE0 0x40
-#define DACR_DAE 0x20
-
-
-static __inline__ void sh_dac_enable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v |= DACR_DAOE1;
- else v |= DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_disable(int channel)
-{
- unsigned char v;
- v = __raw_readb(DACR);
- if(channel) v &= ~DACR_DAOE1;
- else v &= ~DACR_DAOE0;
- __raw_writeb(v,DACR);
-}
-
-static __inline__ void sh_dac_output(u8 value, int channel)
-{
- if(channel) __raw_writeb(value,DADR1);
- else __raw_writeb(value,DADR0);
-}
-
-#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma-register.h b/arch/sh/include/cpu-sh3/cpu/dma-register.h
deleted file mode 100644
index c0f921fb4edcd1..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma-register.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH3 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-#define CHCR_TS_LOW_MASK 0x18
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-#define DMAOR_INIT DMAOR_DME
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- */
-enum {
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_128BIT,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_128BIT] = 4, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 3) << CHCR_TS_LOW_SHIFT)
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
deleted file mode 100644
index cd139681af4b6f..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH3_DMA_H
-#define __ASM_CPU_SH3_DMA_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712)
-#define SH_DMAC_BASE0 0xa4010020
-#else /* SH7705/06/07/09 */
-#define SH_DMAC_BASE0 0xa4000020
-#endif
-
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-
-#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
deleted file mode 100644
index 7290f02b717330..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/freq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_FREQ_H
-#define __ASM_CPU_SH3_FREQ_H
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7712
-#define FRQCR 0xA415FF80
-#else
-#define FRQCR 0xffffff80
-#endif
-
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 4
-
-#define FRQCR_CKOEN 0x0100
-#define FRQCR_PLLEN 0x0080
-#define FRQCR_PSTBY 0x0040
-
-#endif /* __ASM_CPU_SH3_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
deleted file mode 100644
index aeb0588ace980c..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/gpio.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/gpio.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Addresses for the Pin Function Controller
- */
-#ifndef _CPU_SH3_GPIO_H
-#define _CPU_SH3_GPIO_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-
-/* Control registers */
-#define PORT_PACR 0xA4050100UL
-#define PORT_PBCR 0xA4050102UL
-#define PORT_PCCR 0xA4050104UL
-#define PORT_PDCR 0xA4050106UL
-#define PORT_PECR 0xA4050108UL
-#define PORT_PFCR 0xA405010AUL
-#define PORT_PGCR 0xA405010CUL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PPCR 0xA4050118UL
-#define PORT_PRCR 0xA405011AUL
-#define PORT_PSCR 0xA405011CUL
-#define PORT_PTCR 0xA405011EUL
-#define PORT_PUCR 0xA4050120UL
-#define PORT_PVCR 0xA4050122UL
-
-/* Data registers */
-#define PORT_PADR 0xA4050140UL
-/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
-#define PORT_PBDR 0xA4050142UL
-#define PORT_PCDR 0xA4050144UL
-#define PORT_PDDR 0xA4050146UL
-#define PORT_PEDR 0xA4050148UL
-#define PORT_PFDR 0xA405014AUL
-#define PORT_PGDR 0xA405014CUL
-#define PORT_PHDR 0xA405014EUL
-#define PORT_PJDR 0xA4050150UL
-#define PORT_PKDR 0xA4050152UL
-#define PORT_PLDR 0xA4050154UL
-#define PORT_PMDR 0xA4050156UL
-#define PORT_PPDR 0xA4050158UL
-#define PORT_PRDR 0xA405015AUL
-#define PORT_PSDR 0xA405015CUL
-#define PORT_PTDR 0xA405015EUL
-#define PORT_PUDR 0xA4050160UL
-#define PORT_PVDR 0xA4050162UL
-
-/* Pin Select Registers */
-#define PORT_PSELA 0xA4050124UL
-#define PORT_PSELB 0xA4050126UL
-#define PORT_PSELC 0xA4050128UL
-#define PORT_PSELD 0xA405012AUL
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-
-/* Control registers */
-#define PORT_PACR 0xa4000100UL
-#define PORT_PBCR 0xa4000102UL
-#define PORT_PCCR 0xa4000104UL
-#define PORT_PFCR 0xa400010aUL
-
-/* Data registers */
-#define PORT_PADR 0xa4000120UL
-#define PORT_PBDR 0xa4000122UL
-#define PORT_PCDR 0xa4000124UL
-#define PORT_PFDR 0xa400012aUL
-
-#endif
-
-#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
deleted file mode 100644
index ead9a6f721135d..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/mmu_context.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
-#define __ASM_CPU_SH3_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */
-#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */
-#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */
-
-#define MMUCR 0xFFFFFFE0 /* MMU Control Register */
-#define MMUCR_TI (1 << 2) /* TLB flush bit */
-
-#define MMU_TLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#define MMU_NTLB_ENTRIES 128 /* for 7708 */
-#define MMU_NTLB_WAYS 4
-#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */
-
-#define TRA 0xffffffd0
-#define EXPEVT 0xffffffd4
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7712) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
-#else
-#define INTEVT 0xffffffd8
-#endif
-
-#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh3/cpu/serial.h b/arch/sh/include/cpu-sh3/cpu/serial.h
deleted file mode 100644
index 7b2ce6e3003e1e..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/serial.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH3_SERIAL_H
-#define __CPU_SH3_SERIAL_H
-
-#include <linux/serial_sci.h>
-
-extern struct plat_sci_port_ops sh770x_sci_port_ops;
-extern struct plat_sci_port_ops sh7710_sci_port_ops;
-extern struct plat_sci_port_ops sh7720_sci_port_ops;
-
-#endif /* __CPU_SH3_SERIAL_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/sh7720.h b/arch/sh/include/cpu-sh3/cpu/sh7720.h
deleted file mode 100644
index 449790c9eb77cd..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/sh7720.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7720_H__
-#define __ASM_SH7720_H__
-
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, GPIO_PTE3,
- GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, GPIO_PTG6,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, GPIO_PTH3,
- GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4, GPIO_PTJ3,
- GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, GPIO_PTL3,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTP */
- GPIO_PTP4, GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS6B_CE1B,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_A21, GPIO_FN_A20, GPIO_FN_A19, GPIO_FN_A0,
- GPIO_FN_REFOUT, GPIO_FN_IRQOUT,
-
- /* LCDC */
- GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
- GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
- GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
- GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
- GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
- GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
- GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
- GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
- GPIO_FN_LCD_M_DISP,
- GPIO_FN_LCD_CL1, GPIO_FN_LCD_CL2,
- GPIO_FN_LCD_DON, GPIO_FN_LCD_FLM,
- GPIO_FN_LCD_VEPWC, GPIO_FN_LCD_VCPWC,
-
- /* AFEIF */
- GPIO_FN_AFE_RXIN, GPIO_FN_AFE_RDET,
- GPIO_FN_AFE_FS, GPIO_FN_AFE_TXOUT,
- GPIO_FN_AFE_SCLK, GPIO_FN_AFE_RLYCNT,
- GPIO_FN_AFE_HC1,
-
- /* IIC */
- GPIO_FN_IIC_SCL, GPIO_FN_IIC_SDA,
-
- /* DAC */
- GPIO_FN_DA1, GPIO_FN_DA0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* USB */
- GPIO_FN_USB1D_RCV, GPIO_FN_USB1D_TXSE0,
- GPIO_FN_USB1D_TXDPLS, GPIO_FN_USB1D_DMNS,
- GPIO_FN_USB1D_DPLS, GPIO_FN_USB1D_SPEED,
- GPIO_FN_USB1D_TXENL, GPIO_FN_USB2_PWR_EN,
- GPIO_FN_USB1_PWR_EN_USBF_UPLUP, GPIO_FN_USB1D_SUSPEND,
-
- /* INTC */
- GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3_IRL3, GPIO_FN_IRQ2_IRL2,
- GPIO_FN_IRQ1_IRL1, GPIO_FN_IRQ0_IRL0,
-
- /* PCC */
- GPIO_FN_PCC_REG, GPIO_FN_PCC_DRV,
- GPIO_FN_PCC_BVD2, GPIO_FN_PCC_BVD1,
- GPIO_FN_PCC_CD2, GPIO_FN_PCC_CD1,
- GPIO_FN_PCC_RESET, GPIO_FN_PCC_RDY,
- GPIO_FN_PCC_VS2, GPIO_FN_PCC_VS1,
-
- /* HUDI */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_ASEBRKAK, GPIO_FN_TRST,
- GPIO_FN_TMS, GPIO_FN_TDO, GPIO_FN_TDI, GPIO_FN_TCK,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
- GPIO_FN_TEND1, GPIO_FN_TEND0,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_MCLK,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
- GPIO_FN_SIOF0_SCK,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_MCLK,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
- GPIO_FN_SIOF1_SCK,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* TPU */
- GPIO_FN_TPU_TO1, GPIO_FN_TPU_TO0,
- GPIO_FN_TPU_TI3B, GPIO_FN_TPU_TI3A,
- GPIO_FN_TPU_TI2B, GPIO_FN_TPU_TI2A,
- GPIO_FN_TPU_TO3, GPIO_FN_TPU_TO2,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* MMC */
- GPIO_FN_MMC_DAT, GPIO_FN_MMC_CMD,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_VDDON,
- GPIO_FN_MMC_ODMOD,
-
- /* SYSC */
- GPIO_FN_STATUS0, GPIO_FN_STATUS1,
-};
-
-#endif /* __ASM_SH7720_H__ */
diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
deleted file mode 100644
index 9d7e9d98680947..00000000000000
--- a/arch/sh/include/cpu-sh3/cpu/watchdog.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh3/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH3_WATCHDOG_H
-#define __ASM_CPU_SH3_WATCHDOG_H
-
-/* Register definitions */
-#define WTCNT 0xffffff84
-#define WTCSR 0xffffff86
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH3_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
deleted file mode 100644
index f006c9489f5adb..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-4 CPUs.
- */
-#ifndef __ASM_CPU_SH4_ADDRSPACE_H
-#define __ASM_CPU_SH4_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-/* Detailed P4SEG */
-#define P4SEG_STORE_QUE (P4SEG)
-#define P4SEG_IC_ADDR 0xf0000000
-#define P4SEG_IC_DATA 0xf1000000
-#define P4SEG_ITLB_ADDR 0xf2000000
-#define P4SEG_ITLB_DATA 0xf3000000
-#define P4SEG_OC_ADDR 0xf4000000
-#define P4SEG_OC_DATA 0xf5000000
-#define P4SEG_TLB_ADDR 0xf6000000
-#define P4SEG_TLB_DATA 0xf7000000
-#define P4SEG_REG_BASE 0xff000000
-
-#define PA_AREA0 0x00000000
-#define PA_AREA1 0x04000000
-#define PA_AREA2 0x08000000
-#define PA_AREA3 0x0c000000
-#define PA_AREA4 0x10000000
-#define PA_AREA5 0x14000000
-#define PA_AREA6 0x18000000
-#define PA_AREA7 0x1c000000
-
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
-
-#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
deleted file mode 100644
index 72b4d13da127cd..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/cache.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_CACHE_H
-#define __ASM_CPU_SH4_CACHE_H
-
-#define L1_CACHE_SHIFT 5
-
-#define SH_CACHE_VALID 1
-#define SH_CACHE_UPDATED 2
-#define SH_CACHE_COMBINED 4
-#define SH_CACHE_ASSOC 8
-
-#define SH_CCR 0xff00001c /* Address of Cache Control Register */
-#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */
-#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/
-#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */
-#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */
-#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */
-#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */
-#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
-#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
-#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
-#ifndef CONFIG_CPU_SH4A
-#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
-#endif
-
-/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
-#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI)
-
-#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY 0xf4000000
-
-#define RAMCR 0xFF000074
-
-#endif /* __ASM_CPU_SH4_CACHE_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
deleted file mode 100644
index 53f7ab990d8874..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH4 CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#ifndef CPU_DMA_REGISTER_H
-#define CPU_DMA_REGISTER_H
-
-/* SH7751/7760/7780 DMA IRQ sources */
-
-#ifdef CONFIG_CPU_SH4A
-
-#define DMAOR_INIT DMAOR_DME
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00300000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define CHCR_TS_LOW_MASK 0x00000018
-#define CHCR_TS_LOW_SHIFT 3
-#define CHCR_TS_HIGH_MASK 0x00100000
-#define CHCR_TS_HIGH_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-#endif
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_128BIT_BLK = 0xb,
- XMIT_SZ_256BIT_BLK = 0xc,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_128BIT] = 4, \
- [XMIT_SZ_256BIT] = 5, \
- [XMIT_SZ_128BIT_BLK] = 4, \
- [XMIT_SZ_256BIT_BLK] = 5, \
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
- (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
-
-#else /* CONFIG_CPU_SH4A */
-
-#define DMAOR_INIT (0x8000 | DMAOR_DME)
-
-#define CHCR_TS_LOW_MASK 0x70
-#define CHCR_TS_LOW_SHIFT 4
-#define CHCR_TS_HIGH_MASK 0
-#define CHCR_TS_HIGH_SHIFT 0
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 1,
- XMIT_SZ_16BIT = 2,
- XMIT_SZ_32BIT = 3,
- XMIT_SZ_64BIT = 0,
- XMIT_SZ_256BIT = 4,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_256BIT] = 5, \
-}
-
-#define TS_INDEX2VAL(i) (((i) & 7) << CHCR_TS_LOW_SHIFT)
-
-#endif /* CONFIG_CPU_SH4A */
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
deleted file mode 100644
index 38187d06b23433..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#include <linux/sh_intc.h>
-
-/*
- * SH7750/SH7751/SH7760
- */
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMAE0_IRQ evt2irq(0x6c0)
-
-#define SH_DMAC_BASE0 0xffa00000
-#define SH_DMAC_BASE1 0xffa00070
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
deleted file mode 100644
index 29f451bfef19b4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/fpu.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
- *
- * Copyright (C) 2006 STMicroelectronics Limited
- * Author: Carl Shaw <carl.shaw@st.com>
- *
- * Definitions for SH4 FPU operations
- */
-
-#ifndef __CPU_SH4_FPU_H
-#define __CPU_SH4_FPU_H
-
-#define FPSCR_ENABLE_MASK 0x00000f80UL
-
-#define FPSCR_FMOV_DOUBLE (1<<1)
-
-#define FPSCR_CAUSE_INEXACT (1<<12)
-#define FPSCR_CAUSE_UNDERFLOW (1<<13)
-#define FPSCR_CAUSE_OVERFLOW (1<<14)
-#define FPSCR_CAUSE_DIVZERO (1<<15)
-#define FPSCR_CAUSE_INVALID (1<<16)
-#define FPSCR_CAUSE_ERROR (1<<17)
-
-#define FPSCR_DBL_PRECISION (1<<19)
-#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3)
-#define FPSCR_RM_NEAREST (0)
-#define FPSCR_RM_ZERO (1)
-
-#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
deleted file mode 100644
index 662f0f30e106e8..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150010
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-#define FRQCR 0xffc80000
-#define OSCCR 0xffc80018
-#define PLLCR 0xffc80024
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define FRQCR 0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define FRQCR FRQCRA
-#define SCLKACR FCLKACR
-#define SCLKBCR FCLKBCR
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IrDACLKCR 0xa4150018
-
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#elif defined(CONFIG_CPU_SUBTYPE_SH7734)
-#define FRQCR0 0xffc80000
-#define FRQCR2 0xffc80008
-#define FRQMR1 0xffc80014
-#define FRQMR2 0xffc80018
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0 0xffc80000
-#define FRQCR1 0xffc80004
-#define FRQMR1 0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
-#define FRQCR0 0xffc40000
-#define FRQCR1 0xffc40004
-#define FRQMR1 0xffc40014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR0 0xffc00000
-#define FRQCR1 0xffc00004
-#define FRQMR1 0xffc00014
-#else
-#define FRQCR 0xffc00000
-#define FRQCR_PSTBY 0x0200
-#define FRQCR_PLLEN 0x0400
-#define FRQCR_CKOEN 0x0800
-#endif
-#define MIN_DIVISOR_NR 0
-#define MAX_DIVISOR_NR 3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
deleted file mode 100644
index 421b56d5c59562..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- */
-#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
-#define __ASM_CPU_SH4_MMU_CONTEXT_H
-
-#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */
-#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */
-#define MMU_TTB 0xFF000008 /* Translation table base register */
-#define MMU_TEA 0xFF00000C /* TLB Exception Address */
-#define MMU_PTEA 0xFF000034 /* PTE assistance register */
-#define MMU_PTEAEX 0xFF00007C /* PTE ASID extension register */
-
-#define MMUCR 0xFF000010 /* MMU Control Register */
-
-#define MMU_TLB_ENTRY_SHIFT 8
-
-#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000
-#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000
-#define MMU_ITLB_DATA_ARRAY 0xF3000000
-#define MMU_ITLB_DATA_ARRAY2 0xF3800000
-
-#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
-#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000
-#define MMU_UTLB_DATA_ARRAY 0xF7000000
-#define MMU_UTLB_DATA_ARRAY2 0xF7800000
-#define MMU_PAGE_ASSOC_BIT 0x80
-
-#ifdef CONFIG_MMU
-#define MMUCR_AT (1 << 0)
-#else
-#define MMUCR_AT (0)
-#endif
-
-#define MMUCR_TI (1 << 2)
-
-#define MMUCR_URB 0x00FC0000
-#define MMUCR_URB_SHIFT 18
-#define MMUCR_URB_NENTRIES 64
-#define MMUCR_URC 0x0000FC00
-#define MMUCR_URC_SHIFT 10
-
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
-#define MMUCR_SE (1 << 4)
-#else
-#define MMUCR_SE (0)
-#endif
-
-#ifdef CONFIG_CPU_HAS_PTEAEX
-#define MMUCR_AEX (1 << 6)
-#else
-#define MMUCR_AEX (0)
-#endif
-
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME (1 << 7)
-#else
-#define MMUCR_ME (0)
-#endif
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define MMUCR_SQMD (1 << 9)
-#else
-#define MMUCR_SQMD (0)
-#endif
-
-#define MMU_NTLB_ENTRIES 64
-#define MMU_CONTROL_INIT (MMUCR_AT | MMUCR_TI | MMUCR_SQMD | \
- MMUCR_ME | MMUCR_SE | MMUCR_AEX)
-
-#define TRA 0xff000020
-#define EXPEVT 0xff000024
-#define INTEVT 0xff000028
-
-#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
deleted file mode 100644
index 45647566940f30..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/rtc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_RTC_H
-#define __ASM_SH_CPU_SH4_RTC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define rtc_reg_size sizeof(u16)
-#else
-#define rtc_reg_size sizeof(u32)
-#endif
-
-#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
-#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
deleted file mode 100644
index 2306c79f4b5e26..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7722_H__
-#define __ASM_SH7722_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC5, GPIO_PTC4, GPIO_PTC3,
- GPIO_PTC2, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, GPIO_PTF3,
- GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG4, GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, GPIO_PTK3,
- GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR4, GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS4, GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT4, GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU4, GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV4, GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, GPIO_PTW3,
- GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, GPIO_PTX3,
- GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY5, GPIO_PTY4, GPIO_PTY3, GPIO_PTY2,
- GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ5, GPIO_PTZ4, GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD,
- GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_TXD, GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_RTS, GPIO_FN_SCIF1_CTS, GPIO_FN_SCIF1_SCK,
-
- /* SCIF2 */
- GPIO_FN_SCIF2_TXD, GPIO_FN_SCIF2_RXD,
- GPIO_FN_SCIF2_RTS, GPIO_FN_SCIF2_CTS, GPIO_FN_SCIF2_SCK,
-
- /* SIO */
- GPIO_FN_SIOTXD, GPIO_FN_SIORXD,
- GPIO_FN_SIOD, GPIO_FN_SIOSTRB0, GPIO_FN_SIOSTRB1,
- GPIO_FN_SIOSCK, GPIO_FN_SIOMCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO, GPIO_FN_VIO_STEX, GPIO_FN_VIO_STEM,
- GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, GPIO_FN_VIO_CLK,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
- /* Sub LCD - SYS Mode */
- GPIO_FN_LCDDON2, GPIO_FN_LCDVCPWC2, GPIO_FN_LCDVEPWC2,
- GPIO_FN_LCDVSYN2, GPIO_FN_LCDCS2,
-
- /* BSC */
- GPIO_FN_IOIS16, GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_BS, GPIO_FN_CS6B_CE1B, GPIO_FN_WAIT, GPIO_FN_CS6A_CE2B,
-
- /* SBSC */
- GPIO_FN_HPD63, GPIO_FN_HPD62, GPIO_FN_HPD61, GPIO_FN_HPD60,
- GPIO_FN_HPD59, GPIO_FN_HPD58, GPIO_FN_HPD57, GPIO_FN_HPD56,
- GPIO_FN_HPD55, GPIO_FN_HPD54, GPIO_FN_HPD53, GPIO_FN_HPD52,
- GPIO_FN_HPD51, GPIO_FN_HPD50, GPIO_FN_HPD49, GPIO_FN_HPD48,
- GPIO_FN_HPDQM7, GPIO_FN_HPDQM6, GPIO_FN_HPDQM5, GPIO_FN_HPDQM4,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* SDHI */
- GPIO_FN_SDHICD, GPIO_FN_SDHIWP, GPIO_FN_SDHID3, GPIO_FN_SDHID2,
- GPIO_FN_SDHID1, GPIO_FN_SDHID0, GPIO_FN_SDHICMD, GPIO_FN_SDHICLK,
-
- /* SIU - Port A */
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAISLD, GPIO_FN_SIUAILR,
- GPIO_FN_SIUAIBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUMCKA, GPIO_FN_SIUFCKA,
-
- /* SIU - Port B */
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBISLD, GPIO_FN_SIUBILR,
- GPIO_FN_SIUBIBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUMCKB, GPIO_FN_SIUFCKB,
-
- /* AUD */
- GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0,
-
- /* DMAC */
- GPIO_FN_DACK, GPIO_FN_DREQ0,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* SIOF0 */
- GPIO_FN_SIOF0_MCK, GPIO_FN_SIOF0_SCK,
- GPIO_FN_SIOF0_SYNC, GPIO_FN_SIOF0_SS1, GPIO_FN_SIOF0_SS2,
- GPIO_FN_SIOF0_TXD, GPIO_FN_SIOF0_RXD,
-
- /* SIOF1 */
- GPIO_FN_SIOF1_MCK, GPIO_FN_SIOF1_SCK,
- GPIO_FN_SIOF1_SYNC, GPIO_FN_SIOF1_SS1, GPIO_FN_SIOF1_SS2,
- GPIO_FN_SIOF1_TXD, GPIO_FN_SIOF1_RXD,
-
- /* SIM */
- GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* TSIF */
- GPIO_FN_TS_SDAT, GPIO_FN_TS_SCK, GPIO_FN_TS_SDEN, GPIO_FN_TS_SPSYNC,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* TPU */
- GPIO_FN_TPUTO,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-};
-
-enum {
- HWBLK_URAM, HWBLK_XYMEM,
- HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_IIC, HWBLK_RTC,
- HWBLK_SDHI, HWBLK_KEYSC,
- HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
- HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
- HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SIUA_TX,
- SHDMA_SLAVE_SIUA_RX,
- SHDMA_SLAVE_SIUB_TX,
- SHDMA_SLAVE_SIUB_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
-};
-
-#endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
deleted file mode 100644
index 41f675307503d4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7723_H__
-#define __ASM_SH7723_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->3
- * MD1: CPG - Clock Mode 0->3
- * MD2: CPG - Reserved (L: Normal operation)
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE5, GPIO_PTE4, GPIO_PTE3, GPIO_PTE2,
- GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4, GPIO_PTG3, GPIO_PTG2,
- GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ5, GPIO_PTJ3, GPIO_PTJ2,
- GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT5, GPIO_PTT4, GPIO_PTT3, GPIO_PTT2,
- GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU5, GPIO_PTU4, GPIO_PTU3, GPIO_PTU2,
- GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* SCIF0 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF0_PTT_TXD, GPIO_FN_SCIF0_PTT_RXD, GPIO_FN_SCIF0_PTT_SCK,
- GPIO_FN_SCIF0_PTU_TXD, GPIO_FN_SCIF0_PTU_RXD, GPIO_FN_SCIF0_PTU_SCK,
-
- /* SCIF1 (SCIF: 3 pin PTS/PTV) */
- GPIO_FN_SCIF1_PTS_TXD, GPIO_FN_SCIF1_PTS_RXD, GPIO_FN_SCIF1_PTS_SCK,
- GPIO_FN_SCIF1_PTV_TXD, GPIO_FN_SCIF1_PTV_RXD, GPIO_FN_SCIF1_PTV_SCK,
-
- /* SCIF2 (SCIF: 3 pin PTT/PTU) */
- GPIO_FN_SCIF2_PTT_TXD, GPIO_FN_SCIF2_PTT_RXD, GPIO_FN_SCIF2_PTT_SCK,
- GPIO_FN_SCIF2_PTU_TXD, GPIO_FN_SCIF2_PTU_RXD, GPIO_FN_SCIF2_PTU_SCK,
-
- /* SCIF3 (SCIFA: 5 pin PTS/PTV) */
- GPIO_FN_SCIF3_PTS_TXD, GPIO_FN_SCIF3_PTS_RXD, GPIO_FN_SCIF3_PTS_SCK,
- GPIO_FN_SCIF3_PTS_RTS, GPIO_FN_SCIF3_PTS_CTS,
- GPIO_FN_SCIF3_PTV_TXD, GPIO_FN_SCIF3_PTV_RXD, GPIO_FN_SCIF3_PTV_SCK,
- GPIO_FN_SCIF3_PTV_RTS, GPIO_FN_SCIF3_PTV_CTS,
-
- /* SCIF4 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF4_PTE_TXD, GPIO_FN_SCIF4_PTE_RXD, GPIO_FN_SCIF4_PTE_SCK,
- GPIO_FN_SCIF4_PTN_TXD, GPIO_FN_SCIF4_PTN_RXD, GPIO_FN_SCIF4_PTN_SCK,
-
- /* SCIF5 (SCIFA: 3 pin PTE/PTN) */
- GPIO_FN_SCIF5_PTE_TXD, GPIO_FN_SCIF5_PTE_RXD, GPIO_FN_SCIF5_PTE_SCK,
- GPIO_FN_SCIF5_PTN_TXD, GPIO_FN_SCIF5_PTN_RXD, GPIO_FN_SCIF5_PTN_SCK,
-
- /* CEU */
- GPIO_FN_VIO_D15, GPIO_FN_VIO_D14, GPIO_FN_VIO_D13, GPIO_FN_VIO_D12,
- GPIO_FN_VIO_D11, GPIO_FN_VIO_D10, GPIO_FN_VIO_D9, GPIO_FN_VIO_D8,
- GPIO_FN_VIO_D7, GPIO_FN_VIO_D6, GPIO_FN_VIO_D5, GPIO_FN_VIO_D4,
- GPIO_FN_VIO_D3, GPIO_FN_VIO_D2, GPIO_FN_VIO_D1, GPIO_FN_VIO_D0,
- GPIO_FN_VIO_FLD, GPIO_FN_VIO_CKO,
- GPIO_FN_VIO_VD1, GPIO_FN_VIO_HD1, GPIO_FN_VIO_CLK1,
- GPIO_FN_VIO_VD2, GPIO_FN_VIO_HD2, GPIO_FN_VIO_CLK2,
-
- /* LCDC */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDLCLK_PTR, GPIO_FN_LCDLCLK_PTW,
- /* Main LCD */
- GPIO_FN_LCDDON, GPIO_FN_LCDVCPWC, GPIO_FN_LCDVEPWC, GPIO_FN_LCDVSYN,
- /* Main LCD - RGB Mode */
- GPIO_FN_LCDDCK, GPIO_FN_LCDHSYN, GPIO_FN_LCDDISP,
- /* Main LCD - SYS Mode */
- GPIO_FN_LCDRS, GPIO_FN_LCDCS, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
-
- /* IRQ */
- GPIO_FN_IRQ0, GPIO_FN_IRQ1, GPIO_FN_IRQ2, GPIO_FN_IRQ3,
- GPIO_FN_IRQ4, GPIO_FN_IRQ5, GPIO_FN_IRQ6, GPIO_FN_IRQ7,
-
- /* AUD */
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC,
-
- /* SDHI0 (PTD) */
- GPIO_FN_SDHI0CD_PTD, GPIO_FN_SDHI0WP_PTD,
- GPIO_FN_SDHI0D3_PTD, GPIO_FN_SDHI0D2_PTD,
- GPIO_FN_SDHI0D1_PTD, GPIO_FN_SDHI0D0_PTD,
- GPIO_FN_SDHI0CMD_PTD, GPIO_FN_SDHI0CLK_PTD,
-
- /* SDHI0 (PTS) */
- GPIO_FN_SDHI0CD_PTS, GPIO_FN_SDHI0WP_PTS,
- GPIO_FN_SDHI0D3_PTS, GPIO_FN_SDHI0D2_PTS,
- GPIO_FN_SDHI0D1_PTS, GPIO_FN_SDHI0D0_PTS,
- GPIO_FN_SDHI0CMD_PTS, GPIO_FN_SDHI0CLK_PTS,
-
- /* SDHI1 */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2,
- GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
-
- /* SIUA */
- GPIO_FN_SIUAFCK, GPIO_FN_SIUAILR, GPIO_FN_SIUAIBT, GPIO_FN_SIUAISLD,
- GPIO_FN_SIUAOLR, GPIO_FN_SIUAOBT, GPIO_FN_SIUAOSLD, GPIO_FN_SIUAMCK,
- GPIO_FN_SIUAISPD, GPIO_FN_SIUAOSPD,
-
- /* SIUB */
- GPIO_FN_SIUBFCK, GPIO_FN_SIUBILR, GPIO_FN_SIUBIBT, GPIO_FN_SIUBISLD,
- GPIO_FN_SIUBOLR, GPIO_FN_SIUBOBT, GPIO_FN_SIUBOSLD, GPIO_FN_SIUBMCK,
-
- /* IRDA */
- GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
-
- /* VOU */
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_HSYNC, GPIO_FN_DV_VSYNC,
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
-
- /* KEYSC */
- GPIO_FN_KEYIN0, GPIO_FN_KEYIN1, GPIO_FN_KEYIN2, GPIO_FN_KEYIN3,
- GPIO_FN_KEYIN4, GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
-
- /* MSIOF0 (PTF) */
- GPIO_FN_MSIOF0_PTF_TXD, GPIO_FN_MSIOF0_PTF_RXD, GPIO_FN_MSIOF0_PTF_MCK,
- GPIO_FN_MSIOF0_PTF_TSYNC, GPIO_FN_MSIOF0_PTF_TSCK,
- GPIO_FN_MSIOF0_PTF_RSYNC, GPIO_FN_MSIOF0_PTF_RSCK,
- GPIO_FN_MSIOF0_PTF_SS1, GPIO_FN_MSIOF0_PTF_SS2,
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN_MSIOF0_PTT_TXD, GPIO_FN_MSIOF0_PTT_RXD, GPIO_FN_MSIOF0_PTX_MCK,
- GPIO_FN_MSIOF0_PTT_TSYNC, GPIO_FN_MSIOF0_PTT_TSCK,
- GPIO_FN_MSIOF0_PTT_RSYNC, GPIO_FN_MSIOF0_PTT_RSCK,
- GPIO_FN_MSIOF0_PTT_SS1, GPIO_FN_MSIOF0_PTT_SS2,
-
- /* MSIOF1 */
- GPIO_FN_MSIOF1_TXD, GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_MCK,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
-
- /* TSIF */
- GPIO_FN_TS0_SDAT, GPIO_FN_TS0_SCK, GPIO_FN_TS0_SDEN, GPIO_FN_TS0_SPSYNC,
-
- /* FLCTL */
- GPIO_FN_FCE, GPIO_FN_NAF7, GPIO_FN_NAF6, GPIO_FN_NAF5, GPIO_FN_NAF4,
- GPIO_FN_NAF3, GPIO_FN_NAF2, GPIO_FN_NAF1, GPIO_FN_NAF0, GPIO_FN_FCDE,
- GPIO_FN_FOE, GPIO_FN_FSC, GPIO_FN_FWE, GPIO_FN_FRB,
-
- /* DMAC */
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DACK0, GPIO_FN_DREQ0,
-
- /* ADC */
- GPIO_FN_AN3, GPIO_FN_AN2, GPIO_FN_AN1, GPIO_FN_AN0, GPIO_FN_ADTRG,
-
- /* CPG */
- GPIO_FN_STATUS0, GPIO_FN_PDSTATUS,
-
- /* TPU */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
-
- /* BSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_IOIS16, GPIO_FN_WAIT, GPIO_FN_BS,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
-
- /* ATAPI */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IODREQ, GPIO_FN_IDEIORDY, GPIO_FN_IDEINT, GPIO_FN_IDEIOWR,
- GPIO_FN_IDEIORD, GPIO_FN_IDECS1, GPIO_FN_IDECS0, GPIO_FN_IDEA2,
- GPIO_FN_IDEA1, GPIO_FN_IDEA0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
- HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_FLCTL,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
- HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
- HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
- HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
- HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
- HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-#endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
deleted file mode 100644
index b3a7caf54c9d68..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7724_H__
-#define __ASM_SH7724_H__
-
-/* Boot Mode Pins:
- *
- * MD0: CPG - Clock Mode 0->7
- * MD1: CPG - Clock Mode 0->7
- * MD2: CPG - Clock Mode 0->7
- * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
- * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
- * MD8: Test Mode
- * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PTA */
- GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
- GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
-
- /* PTB */
- GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
- GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
-
- /* PTC */
- GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
- GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
-
- /* PTD */
- GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
- GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
-
- /* PTE */
- GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
- GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
-
- /* PTF */
- GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
- GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
-
- /* PTG */
- GPIO_PTG5, GPIO_PTG4,
- GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
-
- /* PTH */
- GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
- GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
-
- /* PTJ */
- GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
- GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
-
- /* PTK */
- GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
- GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
-
- /* PTL */
- GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
- GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
-
- /* PTM */
- GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
- GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
-
- /* PTN */
- GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
- GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
-
- /* PTQ */
- GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
- GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
-
- /* PTR */
- GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
- GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
-
- /* PTS */
- GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
- GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
-
- /* PTT */
- GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
- GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
-
- /* PTU */
- GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
- GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
-
- /* PTV */
- GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
- GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
-
- /* PTW */
- GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
- GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
-
- /* PTX */
- GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
- GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
-
- /* PTY */
- GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
- GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
-
- /* PTZ */
- GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
- GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
-
- /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
- GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
- GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
- GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
- GPIO_FN_IOIS16, GPIO_FN_WAIT,
- GPIO_FN_BS,
-
- /* KEYSC (PTA/PTB)*/
- GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
- GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0,
- GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
-
- /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
- GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
- GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
- GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
- GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
- GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR,
- GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
- GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
- GPIO_FN_IDEINT, GPIO_FN_IDEIORDY,
-
- /* TPU (PTB/PTR/PTS) */
- GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
- GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
-
- /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
- GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
- GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
- GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
- GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
- GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
- GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
- GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN,
- GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
- GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK,
-
- /* SCIF0 (PTF/PTM) */
- GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
-
- /* SCIF1 (PTL) */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
- GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
- GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
-
- /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
- GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
- GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
- GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
- GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
-
- /* SCIF4 (PTE) */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 (PTS) */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* FSI (PTE/PTU/PTV) */
- GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD,
- GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK,
- GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
- GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK,
- GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO,
- GPIO_FN_FSIIASD,
-
- /* AUD (PTG) */
- GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
- GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
-
- /* VIO (PTS) (common?) */
- GPIO_FN_VIO_CKO,
-
- /* VIO0 (PTH/PTK) */
- GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
- GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8,
- GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4,
- GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0,
- GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK,
- GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
-
- /* VIO1 (PTK/PTS) */
- GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
- GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
- GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
-
- /* Eth (PTL/PTN/PTX) */
- GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1,
- GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1,
- GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
- GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV,
- GPIO_FN_LNKSTA, GPIO_FN_MDIO,
- GPIO_FN_MDC,
-
- /* System (PTJ) */
- GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
-
- /* VOU (PTL/PTM/PTN*/
- GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
- GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
- GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
- GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
- GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
-
- /* MSIOF0 (PTL/PTM) */
- GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
- GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK,
- GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
- GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
- GPIO_FN_MSIOF0_RSYNC,
-
- /* MSIOF1 (PTV) */
- GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD,
- GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK,
- GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
- GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
- GPIO_FN_MSIOF1_RSYNC,
-
- /* DMAC (PTU/PTX) */
- GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
- GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
-
- /* SDHI0 (PTY) */
- GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
- GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0,
-
- /* SDHI1 (PTW) */
- GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
- GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0,
-
- /* MMC (PTW/PTX)*/
- GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
- GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
- GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
-
- /* IrDA (PTX) */
- GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
-
- /* TSIF (PTX) */
- GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
- GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
-
- /* IRQ (PTZ) */
- GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
- GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
- GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
-};
-
-enum {
- HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
- HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
- HWBLK_HUDI, HWBLK_UBC,
- HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
- HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
- HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
- HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
- HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
- HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
- HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
- HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
- HWBLK_BEU0, HWBLK_CEU0, HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
- HWBLK_NR,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SCIF0_TX,
- SHDMA_SLAVE_SCIF0_RX,
- SHDMA_SLAVE_SCIF1_TX,
- SHDMA_SLAVE_SCIF1_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_SCIF5_TX,
- SHDMA_SLAVE_SCIF5_RX,
- SHDMA_SLAVE_USB0D0_TX,
- SHDMA_SLAVE_USB0D0_RX,
- SHDMA_SLAVE_USB0D1_TX,
- SHDMA_SLAVE_USB0D1_RX,
- SHDMA_SLAVE_USB1D0_TX,
- SHDMA_SLAVE_USB1D0_RX,
- SHDMA_SLAVE_USB1D1_TX,
- SHDMA_SLAVE_USB1D1_RX,
- SHDMA_SLAVE_SDHI0_TX,
- SHDMA_SLAVE_SDHI0_RX,
- SHDMA_SLAVE_SDHI1_TX,
- SHDMA_SLAVE_SDHI1_RX,
-};
-
-extern struct clk sh7724_fsimcka_clk;
-extern struct clk sh7724_fsimckb_clk;
-extern struct clk sh7724_dv_clki;
-
-#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7734.h b/arch/sh/include/cpu-sh4/cpu/sh7734.h
deleted file mode 100644
index 82b63208135aec..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7734.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7734_H__
-#define __ASM_SH7734_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
- */
-enum {
- GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
- GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
- GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
- GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
- GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
- GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
- GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
- GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
-
- GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
- GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
- GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
- GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
- GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
- GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
- GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
- GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31,
-
- GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
- GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
- GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
- GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
- GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
- GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
- GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
- GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
-
- GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
- GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
- GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
- GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
- GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
- GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
- GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
- GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
-
- GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
- GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
- GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
- GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
- GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
- GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
- GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
- GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
-
- GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
- GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
- GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
-
- GPIO_FN_CLKOUT, GPIO_FN_BS, GPIO_FN_CS0, GPIO_FN_EX_CS0, GPIO_FN_RD,
- GPIO_FN_WE0, GPIO_FN_WE1,
-
- GPIO_FN_SCL0, GPIO_FN_PENC0, GPIO_FN_USB_OVC0,
-
- GPIO_FN_IRQ2_B, GPIO_FN_IRQ3_B,
-
- /* IPSR0 */
- GPIO_FN_A15, GPIO_FN_ST0_VCO_CLKIN, GPIO_FN_LCD_DATA15_A,
- GPIO_FN_TIOC3D_C,
- GPIO_FN_A14, GPIO_FN_LCD_DATA14_A, GPIO_FN_TIOC3C_C,
- GPIO_FN_A13, GPIO_FN_LCD_DATA13_A, GPIO_FN_TIOC3B_C,
- GPIO_FN_A12, GPIO_FN_LCD_DATA12_A, GPIO_FN_TIOC3A_C,
- GPIO_FN_A11, GPIO_FN_ST0_D7, GPIO_FN_LCD_DATA11_A,
- GPIO_FN_TIOC2B_C,
- GPIO_FN_A10, GPIO_FN_ST0_D6, GPIO_FN_LCD_DATA10_A,
- GPIO_FN_TIOC2A_C,
- GPIO_FN_A9, GPIO_FN_ST0_D5, GPIO_FN_LCD_DATA9_A,
- GPIO_FN_TIOC1B_C,
- GPIO_FN_A8, GPIO_FN_ST0_D4, GPIO_FN_LCD_DATA8_A,
- GPIO_FN_TIOC1A_C,
- GPIO_FN_A7, GPIO_FN_ST0_D3, GPIO_FN_LCD_DATA7_A, GPIO_FN_TIOC0D_C,
- GPIO_FN_A6, GPIO_FN_ST0_D2, GPIO_FN_LCD_DATA6_A, GPIO_FN_TIOC0C_C,
- GPIO_FN_A5, GPIO_FN_ST0_D1, GPIO_FN_LCD_DATA5_A, GPIO_FN_TIOC0B_C,
- GPIO_FN_A4, GPIO_FN_ST0_D0, GPIO_FN_LCD_DATA4_A, GPIO_FN_TIOC0A_C,
- GPIO_FN_A3, GPIO_FN_ST0_VLD, GPIO_FN_LCD_DATA3_A, GPIO_FN_TCLKD_C,
- GPIO_FN_A2, GPIO_FN_ST0_SYC, GPIO_FN_LCD_DATA2_A, GPIO_FN_TCLKC_C,
- GPIO_FN_A1, GPIO_FN_ST0_REQ, GPIO_FN_LCD_DATA1_A, GPIO_FN_TCLKB_C,
- GPIO_FN_A0, GPIO_FN_ST0_CLKIN, GPIO_FN_LCD_DATA0_A, GPIO_FN_TCLKA_C,
-
- /* IPSR1 */
- GPIO_FN_D3, GPIO_FN_SD0_DAT3_A, GPIO_FN_MMC_D3_A, GPIO_FN_ST1_D6,
- GPIO_FN_FD3_A,
- GPIO_FN_D2, GPIO_FN_SD0_DAT2_A, GPIO_FN_MMC_D2_A, GPIO_FN_ST1_D5,
- GPIO_FN_FD2_A,
- GPIO_FN_D1, GPIO_FN_SD0_DAT1_A, GPIO_FN_MMC_D1_A, GPIO_FN_ST1_D4,
- GPIO_FN_FD1_A,
- GPIO_FN_D0, GPIO_FN_SD0_DAT0_A, GPIO_FN_MMC_D0_A, GPIO_FN_ST1_D3,
- GPIO_FN_FD0_A,
- GPIO_FN_A25, GPIO_FN_TX2_D, GPIO_FN_ST1_D2,
- GPIO_FN_A24, GPIO_FN_RX2_D, GPIO_FN_ST1_D1,
- GPIO_FN_A23, GPIO_FN_ST1_D0, GPIO_FN_LCD_M_DISP_A,
- GPIO_FN_A22, GPIO_FN_ST1_VLD, GPIO_FN_LCD_VEPWC_A,
- GPIO_FN_A21, GPIO_FN_ST1_SYC, GPIO_FN_LCD_VCPWC_A,
- GPIO_FN_A20, GPIO_FN_ST1_REQ, GPIO_FN_LCD_FLM_A,
- GPIO_FN_A19, GPIO_FN_ST1_CLKIN, GPIO_FN_LCD_CLK_A, GPIO_FN_TIOC4D_C,
- GPIO_FN_A18, GPIO_FN_ST1_PWM, GPIO_FN_LCD_CL2_A, GPIO_FN_TIOC4C_C,
- GPIO_FN_A17, GPIO_FN_ST1_VCO_CLKIN, GPIO_FN_LCD_CL1_A, GPIO_FN_TIOC4B_C,
- GPIO_FN_A16, GPIO_FN_ST0_PWM, GPIO_FN_LCD_DON_A, GPIO_FN_TIOC4A_C,
-
- /* IPSR2 */
- GPIO_FN_D14, GPIO_FN_TX2_B, GPIO_FN_FSE_A, GPIO_FN_ET0_TX_CLK_B,
- GPIO_FN_D13, GPIO_FN_RX2_B, GPIO_FN_FRB_A, GPIO_FN_ET0_ETXD6_B,
- GPIO_FN_D12, GPIO_FN_FWE_A, GPIO_FN_ET0_ETXD5_B,
- GPIO_FN_D11, GPIO_FN_RSPI_MISO_A, GPIO_FN_QMI_QIO1_A,
- GPIO_FN_FRE_A, GPIO_FN_ET0_ETXD3_B,
- GPIO_FN_D10, GPIO_FN_RSPI_MOSI_A, GPIO_FN_QMO_QIO0_A,
- GPIO_FN_FALE_A, GPIO_FN_ET0_ETXD2_B,
- GPIO_FN_D9, GPIO_FN_SD0_CMD_A, GPIO_FN_MMC_CMD_A, GPIO_FN_QIO3_A,
- GPIO_FN_FCLE_A, GPIO_FN_ET0_ETXD1_B,
- GPIO_FN_D8, GPIO_FN_SD0_CLK_A, GPIO_FN_MMC_CLK_A, GPIO_FN_QIO2_A,
- GPIO_FN_FCE_A, GPIO_FN_ET0_GTX_CLK_B,
- GPIO_FN_D7, GPIO_FN_RSPI_SSL_A, GPIO_FN_MMC_D7_A, GPIO_FN_QSSL_A,
- GPIO_FN_FD7_A,
- GPIO_FN_D6, GPIO_FN_RSPI_RSPCK_A, GPIO_FN_MMC_D6_A, GPIO_FN_QSPCLK_A,
- GPIO_FN_FD6_A,
- GPIO_FN_D5, GPIO_FN_SD0_WP_A, GPIO_FN_MMC_D5_A, GPIO_FN_FD5_A,
- GPIO_FN_D4, GPIO_FN_SD0_CD_A, GPIO_FN_MMC_D4_A, GPIO_FN_ST1_D7,
- GPIO_FN_FD4_A,
-
- /* IPSR3 */
- GPIO_FN_DRACK0, GPIO_FN_SD1_DAT2_A, GPIO_FN_ATAG, GPIO_FN_TCLK1_A,
- GPIO_FN_ET0_ETXD7,
- GPIO_FN_EX_WAIT2, GPIO_FN_SD1_DAT1_A, GPIO_FN_DACK2, GPIO_FN_CAN1_RX_C,
- GPIO_FN_ET0_MAGIC_C, GPIO_FN_ET0_ETXD6_A,
- GPIO_FN_EX_WAIT1, GPIO_FN_SD1_DAT0_A, GPIO_FN_DREQ2, GPIO_FN_CAN1_TX_C,
- GPIO_FN_ET0_LINK_C, GPIO_FN_ET0_ETXD5_A,
- GPIO_FN_EX_WAIT0, GPIO_FN_TCLK1_B,
- GPIO_FN_RD_WR, GPIO_FN_TCLK0, GPIO_FN_CAN_CLK_B, GPIO_FN_ET0_ETXD4,
- GPIO_FN_EX_CS5, GPIO_FN_SD1_CMD_A, GPIO_FN_ATADIR, GPIO_FN_QSSL_B,
- GPIO_FN_ET0_ETXD3_A,
- GPIO_FN_EX_CS4, GPIO_FN_SD1_WP_A, GPIO_FN_ATAWR, GPIO_FN_QMI_QIO1_B,
- GPIO_FN_ET0_ETXD2_A,
- GPIO_FN_EX_CS3, GPIO_FN_SD1_CD_A, GPIO_FN_ATARD, GPIO_FN_QMO_QIO0_B,
- GPIO_FN_ET0_ETXD1_A,
- GPIO_FN_EX_CS2, GPIO_FN_TX3_B, GPIO_FN_ATACS1, GPIO_FN_QSPCLK_B,
- GPIO_FN_ET0_GTX_CLK_A,
- GPIO_FN_EX_CS1, GPIO_FN_RX3_B, GPIO_FN_ATACS0, GPIO_FN_QIO2_B,
- GPIO_FN_ET0_ETXD0,
- GPIO_FN_CS1_A26, GPIO_FN_QIO3_B,
- GPIO_FN_D15, GPIO_FN_SCK2_B,
-
- /* IPSR4 */
- GPIO_FN_SCK2_A, GPIO_FN_VI0_G3,
- GPIO_FN_RTS1_B, GPIO_FN_VI0_G2,
- GPIO_FN_CTS1_B, GPIO_FN_VI0_DATA7_VI0_G1,
- GPIO_FN_TX1_B, GPIO_FN_VI0_DATA6_VI0_G0, GPIO_FN_ET0_PHY_INT_A,
- GPIO_FN_RX1_B, GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_ET0_MAGIC_A,
- GPIO_FN_SCK1_B, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_ET0_LINK_A,
- GPIO_FN_RTS0_B, GPIO_FN_VI0_DATA3_VI0_B3, GPIO_FN_ET0_MDIO_A,
- GPIO_FN_CTS0_B, GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_RMII0_MDIO_A,
- GPIO_FN_ET0_MDC,
- GPIO_FN_HTX0_A, GPIO_FN_TX1_A, GPIO_FN_VI0_DATA1_VI0_B1,
- GPIO_FN_RMII0_MDC_A, GPIO_FN_ET0_COL,
- GPIO_FN_HRX0_A, GPIO_FN_RX1_A, GPIO_FN_VI0_DATA0_VI0_B0,
- GPIO_FN_RMII0_CRS_DV_A, GPIO_FN_ET0_CRS,
- GPIO_FN_HSCK0_A, GPIO_FN_SCK1_A, GPIO_FN_VI0_VSYNC,
- GPIO_FN_RMII0_RX_ER_A, GPIO_FN_ET0_RX_ER,
- GPIO_FN_HRTS0_A, GPIO_FN_RTS1_A, GPIO_FN_VI0_HSYNC,
- GPIO_FN_RMII0_TXD_EN_A, GPIO_FN_ET0_RX_DV,
- GPIO_FN_HCTS0_A, GPIO_FN_CTS1_A, GPIO_FN_VI0_FIELD,
- GPIO_FN_RMII0_RXD1_A, GPIO_FN_ET0_ERXD7,
-
- /* IPSR5 */
- GPIO_FN_SD2_CLK_A, GPIO_FN_RX2_A, GPIO_FN_VI0_G4, GPIO_FN_ET0_RX_CLK_B,
- GPIO_FN_SD2_CMD_A, GPIO_FN_TX2_A, GPIO_FN_VI0_G5, GPIO_FN_ET0_ERXD2_B,
- GPIO_FN_SD2_DAT0_A, GPIO_FN_RX3_A, GPIO_FN_VI0_R0, GPIO_FN_ET0_ERXD3_B,
- GPIO_FN_SD2_DAT1_A, GPIO_FN_TX3_A, GPIO_FN_VI0_R1, GPIO_FN_ET0_MDIO_B,
- GPIO_FN_SD2_DAT2_A, GPIO_FN_RX4_A, GPIO_FN_VI0_R2, GPIO_FN_ET0_LINK_B,
- GPIO_FN_SD2_DAT3_A, GPIO_FN_TX4_A, GPIO_FN_VI0_R3, GPIO_FN_ET0_MAGIC_B,
- GPIO_FN_SD2_CD_A, GPIO_FN_RX5_A, GPIO_FN_VI0_R4, GPIO_FN_ET0_PHY_INT_B,
- GPIO_FN_SD2_WP_A, GPIO_FN_TX5_A, GPIO_FN_VI0_R5,
- GPIO_FN_REF125CK, GPIO_FN_ADTRG, GPIO_FN_RX5_C,
- GPIO_FN_REF50CK, GPIO_FN_CTS1_E, GPIO_FN_HCTS0_D,
-
- /* IPSR6 */
- GPIO_FN_DU0_DR0, GPIO_FN_SCIF_CLK_B, GPIO_FN_HRX0_D, GPIO_FN_IETX_A,
- GPIO_FN_TCLKA_A, GPIO_FN_HIFD00,
- GPIO_FN_DU0_DR1, GPIO_FN_SCK0_B, GPIO_FN_HTX0_D, GPIO_FN_IERX_A,
- GPIO_FN_TCLKB_A, GPIO_FN_HIFD01,
- GPIO_FN_DU0_DR2, GPIO_FN_RX0_B, GPIO_FN_TCLKC_A, GPIO_FN_HIFD02,
- GPIO_FN_DU0_DR3, GPIO_FN_TX0_B, GPIO_FN_TCLKD_A, GPIO_FN_HIFD03,
- GPIO_FN_DU0_DR4, GPIO_FN_CTS0_C, GPIO_FN_TIOC0A_A, GPIO_FN_HIFD04,
- GPIO_FN_DU0_DR5, GPIO_FN_RTS0_C, GPIO_FN_TIOC0B_A, GPIO_FN_HIFD05,
- GPIO_FN_DU0_DR6, GPIO_FN_SCK1_C, GPIO_FN_TIOC0C_A, GPIO_FN_HIFD06,
- GPIO_FN_DU0_DR7, GPIO_FN_RX1_C, GPIO_FN_TIOC0D_A, GPIO_FN_HIFD07,
- GPIO_FN_DU0_DG0, GPIO_FN_TX1_C, GPIO_FN_HSCK0_D, GPIO_FN_IECLK_A,
- GPIO_FN_TIOC1A_A, GPIO_FN_HIFD08,
- GPIO_FN_DU0_DG1, GPIO_FN_CTS1_C, GPIO_FN_HRTS0_D, GPIO_FN_TIOC1B_A,
- GPIO_FN_HIFD09,
-
- /* IPSR7 */
- GPIO_FN_DU0_DG2, GPIO_FN_RTS1_C, GPIO_FN_RMII0_MDC_B, GPIO_FN_TIOC2A_A,
- GPIO_FN_HIFD10,
- GPIO_FN_DU0_DG3, GPIO_FN_SCK2_C, GPIO_FN_RMII0_MDIO_B, GPIO_FN_TIOC2B_A,
- GPIO_FN_HIFD11,
- GPIO_FN_DU0_DG4, GPIO_FN_RX2_C, GPIO_FN_RMII0_CRS_DV_B,
- GPIO_FN_TIOC3A_A, GPIO_FN_HIFD12,
- GPIO_FN_DU0_DG5, GPIO_FN_TX2_C, GPIO_FN_RMII0_RX_ER_B,
- GPIO_FN_TIOC3B_A, GPIO_FN_HIFD13,
- GPIO_FN_DU0_DG6, GPIO_FN_RX3_C, GPIO_FN_RMII0_RXD0_B,
- GPIO_FN_TIOC3C_A, GPIO_FN_HIFD14,
- GPIO_FN_DU0_DG7, GPIO_FN_TX3_C, GPIO_FN_RMII0_RXD1_B,
- GPIO_FN_TIOC3D_A, GPIO_FN_HIFD15,
- GPIO_FN_DU0_DB0, GPIO_FN_RX4_C, GPIO_FN_RMII0_TXD_EN_B,
- GPIO_FN_TIOC4A_A, GPIO_FN_HIFCS,
- GPIO_FN_DU0_DB1, GPIO_FN_TX4_C, GPIO_FN_RMII0_TXD0_B,
- GPIO_FN_TIOC4B_A, GPIO_FN_HIFRS,
- GPIO_FN_DU0_DB2, GPIO_FN_RX5_B, GPIO_FN_RMII0_TXD1_B,
- GPIO_FN_TIOC4C_A, GPIO_FN_HIFWR,
- GPIO_FN_DU0_DB3, GPIO_FN_TX5_B, GPIO_FN_TIOC4D_A, GPIO_FN_HIFRD,
- GPIO_FN_DU0_DB4, GPIO_FN_HIFINT,
-
- /* IPSR8 */
- GPIO_FN_DU0_DB5, GPIO_FN_HIFDREQ,
- GPIO_FN_DU0_DB6, GPIO_FN_HIFRDY,
- GPIO_FN_DU0_DB7, GPIO_FN_SSI_SCK0_B, GPIO_FN_HIFEBL_B,
- GPIO_FN_DU0_DOTCLKIN, GPIO_FN_HSPI_CS0_C, GPIO_FN_SSI_WS0_B,
- GPIO_FN_DU0_DOTCLKOUT, GPIO_FN_HSPI_CLK0_C, GPIO_FN_SSI_SDATA0_B,
- GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_HSPI_TX0_C, GPIO_FN_SSI_SCK1_B,
- GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_HSPI_RX0_C, GPIO_FN_SSI_WS1_B,
- GPIO_FN_DU0_EXODDF_DU0_ODDF, GPIO_FN_CAN0_RX_B, GPIO_FN_HSCK0_B,
- GPIO_FN_SSI_SDATA1_B,
- GPIO_FN_DU0_DISP, GPIO_FN_CAN0_TX_B, GPIO_FN_HRX0_B,
- GPIO_FN_AUDIO_CLKA_B,
- GPIO_FN_DU0_CDE, GPIO_FN_HTX0_B, GPIO_FN_AUDIO_CLKB_B,
- GPIO_FN_LCD_VCPWC_B,
- GPIO_FN_IRQ0_A, GPIO_FN_HSPI_TX_B, GPIO_FN_RX3_E, GPIO_FN_ET0_ERXD0,
- GPIO_FN_IRQ1_A, GPIO_FN_HSPI_RX_B, GPIO_FN_TX3_E, GPIO_FN_ET0_ERXD1,
- GPIO_FN_IRQ2_A, GPIO_FN_CTS0_A, GPIO_FN_HCTS0_B, GPIO_FN_ET0_ERXD2_A,
- GPIO_FN_IRQ3_A, GPIO_FN_RTS0_A, GPIO_FN_HRTS0_B, GPIO_FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- GPIO_FN_VI1_CLK_A, GPIO_FN_FD0_B, GPIO_FN_LCD_DATA0_B,
- GPIO_FN_VI1_0_A, GPIO_FN_FD1_B, GPIO_FN_LCD_DATA1_B,
- GPIO_FN_VI1_1_A, GPIO_FN_FD2_B, GPIO_FN_LCD_DATA2_B,
- GPIO_FN_VI1_2_A, GPIO_FN_FD3_B, GPIO_FN_LCD_DATA3_B,
- GPIO_FN_VI1_3_A, GPIO_FN_FD4_B, GPIO_FN_LCD_DATA4_B,
- GPIO_FN_VI1_4_A, GPIO_FN_FD5_B, GPIO_FN_LCD_DATA5_B,
- GPIO_FN_VI1_5_A, GPIO_FN_FD6_B, GPIO_FN_LCD_DATA6_B,
- GPIO_FN_VI1_6_A, GPIO_FN_FD7_B, GPIO_FN_LCD_DATA7_B,
- GPIO_FN_VI1_7_A, GPIO_FN_FCE_B, GPIO_FN_LCD_DATA8_B,
- GPIO_FN_SSI_SCK0_A, GPIO_FN_TIOC1A_B, GPIO_FN_LCD_DATA9_B,
- GPIO_FN_SSI_WS0_A, GPIO_FN_TIOC1B_B, GPIO_FN_LCD_DATA10_B,
- GPIO_FN_SSI_SDATA0_A, GPIO_FN_VI1_0_B, GPIO_FN_TIOC2A_B,
- GPIO_FN_LCD_DATA11_B,
- GPIO_FN_SSI_SCK1_A, GPIO_FN_VI1_1_B, GPIO_FN_TIOC2B_B,
- GPIO_FN_LCD_DATA12_B,
- GPIO_FN_SSI_WS1_A, GPIO_FN_VI1_2_B, GPIO_FN_LCD_DATA13_B,
- GPIO_FN_SSI_SDATA1_A, GPIO_FN_VI1_3_B, GPIO_FN_LCD_DATA14_B,
-
- /* IPSR10 */
- GPIO_FN_SSI_SCK23, GPIO_FN_VI1_4_B, GPIO_FN_RX1_D, GPIO_FN_FCLE_B,
- GPIO_FN_LCD_DATA15_B,
- GPIO_FN_SSI_WS23, GPIO_FN_VI1_5_B, GPIO_FN_TX1_D, GPIO_FN_HSCK0_C,
- GPIO_FN_FALE_B, GPIO_FN_LCD_DON_B,
- GPIO_FN_SSI_SDATA2, GPIO_FN_VI1_6_B, GPIO_FN_HRX0_C, GPIO_FN_FRE_B,
- GPIO_FN_LCD_CL1_B,
- GPIO_FN_SSI_SDATA3, GPIO_FN_VI1_7_B, GPIO_FN_HTX0_C, GPIO_FN_FWE_B,
- GPIO_FN_LCD_CL2_B,
- GPIO_FN_AUDIO_CLKA_A, GPIO_FN_VI1_CLK_B, GPIO_FN_SCK1_D,
- GPIO_FN_IECLK_B, GPIO_FN_LCD_FLM_B,
- GPIO_FN_AUDIO_CLKB_A, GPIO_FN_LCD_CLK_B,
- GPIO_FN_AUDIO_CLKC, GPIO_FN_SCK1_E, GPIO_FN_HCTS0_C, GPIO_FN_FRB_B,
- GPIO_FN_LCD_VEPWC_B,
- GPIO_FN_AUDIO_CLKOUT, GPIO_FN_TX1_E, GPIO_FN_HRTS0_C, GPIO_FN_FSE_B,
- GPIO_FN_LCD_M_DISP_B,
- GPIO_FN_CAN_CLK_A, GPIO_FN_RX4_D,
- GPIO_FN_CAN0_TX_A, GPIO_FN_TX4_D, GPIO_FN_MLB_CLK,
- GPIO_FN_CAN1_RX_A, GPIO_FN_IRQ1_B,
- GPIO_FN_CAN0_RX_A, GPIO_FN_IRQ0_B, GPIO_FN_MLB_SIG,
- GPIO_FN_CAN1_TX_A, GPIO_FN_TX5_C, GPIO_FN_MLB_DAT,
-
- /* IPSR11 */
- GPIO_FN_SCL1, GPIO_FN_SCIF_CLK_C,
- GPIO_FN_SDA1, GPIO_FN_RX1_E,
- GPIO_FN_SDA0, GPIO_FN_HIFEBL_A,
- GPIO_FN_SDSELF, GPIO_FN_RTS1_E,
- GPIO_FN_SCIF_CLK_A, GPIO_FN_HSPI_CLK_A, GPIO_FN_VI0_CLK,
- GPIO_FN_RMII0_TXD0_A, GPIO_FN_ET0_ERXD4,
- GPIO_FN_SCK0_A, GPIO_FN_HSPI_CS_A, GPIO_FN_VI0_CLKENB,
- GPIO_FN_RMII0_TXD1_A, GPIO_FN_ET0_ERXD5,
- GPIO_FN_RX0_A, GPIO_FN_HSPI_RX_A, GPIO_FN_RMII0_RXD0_A,
- GPIO_FN_ET0_ERXD6,
- GPIO_FN_TX0_A, GPIO_FN_HSPI_TX_A,
- GPIO_FN_PENC1, GPIO_FN_TX3_D, GPIO_FN_CAN1_TX_B, GPIO_FN_TX5_D,
- GPIO_FN_IETX_B,
- GPIO_FN_USB_OVC1, GPIO_FN_RX3_D, GPIO_FN_CAN1_RX_B, GPIO_FN_RX5_D,
- GPIO_FN_IERX_B,
- GPIO_FN_DREQ0, GPIO_FN_SD1_CLK_A, GPIO_FN_ET0_TX_EN,
- GPIO_FN_DACK0, GPIO_FN_SD1_DAT3_A, GPIO_FN_ET0_TX_ER,
- GPIO_FN_DREQ1, GPIO_FN_HSPI_CLK_B, GPIO_FN_RX4_B, GPIO_FN_ET0_PHY_INT_C,
- GPIO_FN_ET0_TX_CLK_A,
- GPIO_FN_DACK1, GPIO_FN_HSPI_CS_B, GPIO_FN_TX4_B, GPIO_FN_ET0_RX_CLK_A,
- GPIO_FN_PRESETOUT, GPIO_FN_ST_CLKOUT,
-
-};
-
-#endif /* __ASM_SH7734_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
deleted file mode 100644
index 6781d41b7467d2..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7757.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7757_H__
-#define __ASM_SH7757_H__
-
-enum {
- /* PTA */
- GPIO_PTA0, GPIO_PTA1, GPIO_PTA2, GPIO_PTA3,
- GPIO_PTA4, GPIO_PTA5, GPIO_PTA6, GPIO_PTA7,
-
- /* PTB */
- GPIO_PTB0, GPIO_PTB1, GPIO_PTB2, GPIO_PTB3,
- GPIO_PTB4, GPIO_PTB5, GPIO_PTB6, GPIO_PTB7,
-
- /* PTC */
- GPIO_PTC0, GPIO_PTC1, GPIO_PTC2, GPIO_PTC3,
- GPIO_PTC4, GPIO_PTC5, GPIO_PTC6, GPIO_PTC7,
-
- /* PTD */
- GPIO_PTD0, GPIO_PTD1, GPIO_PTD2, GPIO_PTD3,
- GPIO_PTD4, GPIO_PTD5, GPIO_PTD6, GPIO_PTD7,
-
- /* PTE */
- GPIO_PTE0, GPIO_PTE1, GPIO_PTE2, GPIO_PTE3,
- GPIO_PTE4, GPIO_PTE5, GPIO_PTE6, GPIO_PTE7,
-
- /* PTF */
- GPIO_PTF0, GPIO_PTF1, GPIO_PTF2, GPIO_PTF3,
- GPIO_PTF4, GPIO_PTF5, GPIO_PTF6, GPIO_PTF7,
-
- /* PTG */
- GPIO_PTG0, GPIO_PTG1, GPIO_PTG2, GPIO_PTG3,
- GPIO_PTG4, GPIO_PTG5, GPIO_PTG6, GPIO_PTG7,
-
- /* PTH */
- GPIO_PTH0, GPIO_PTH1, GPIO_PTH2, GPIO_PTH3,
- GPIO_PTH4, GPIO_PTH5, GPIO_PTH6, GPIO_PTH7,
-
- /* PTI */
- GPIO_PTI0, GPIO_PTI1, GPIO_PTI2, GPIO_PTI3,
- GPIO_PTI4, GPIO_PTI5, GPIO_PTI6, GPIO_PTI7,
-
- /* PTJ */
- GPIO_PTJ0, GPIO_PTJ1, GPIO_PTJ2, GPIO_PTJ3,
- GPIO_PTJ4, GPIO_PTJ5, GPIO_PTJ6,
-
- /* PTK */
- GPIO_PTK0, GPIO_PTK1, GPIO_PTK2, GPIO_PTK3,
- GPIO_PTK4, GPIO_PTK5, GPIO_PTK6, GPIO_PTK7,
-
- /* PTL */
- GPIO_PTL0, GPIO_PTL1, GPIO_PTL2, GPIO_PTL3,
- GPIO_PTL4, GPIO_PTL5, GPIO_PTL6,
-
- /* PTM */
- GPIO_PTM0, GPIO_PTM1, GPIO_PTM2, GPIO_PTM3,
- GPIO_PTM4, GPIO_PTM5, GPIO_PTM6, GPIO_PTM7,
-
- /* PTN */
- GPIO_PTN0, GPIO_PTN1, GPIO_PTN2, GPIO_PTN3,
- GPIO_PTN4, GPIO_PTN5, GPIO_PTN6,
-
- /* PTO */
- GPIO_PTO0, GPIO_PTO1, GPIO_PTO2, GPIO_PTO3,
- GPIO_PTO4, GPIO_PTO5, GPIO_PTO6, GPIO_PTO7,
-
- /* PTP */
- GPIO_PTP0, GPIO_PTP1, GPIO_PTP2, GPIO_PTP3,
- GPIO_PTP4, GPIO_PTP5, GPIO_PTP6, GPIO_PTP7,
-
- /* PTQ */
- GPIO_PTQ0, GPIO_PTQ1, GPIO_PTQ2, GPIO_PTQ3,
- GPIO_PTQ4, GPIO_PTQ5, GPIO_PTQ6,
-
- /* PTR */
- GPIO_PTR0, GPIO_PTR1, GPIO_PTR2, GPIO_PTR3,
- GPIO_PTR4, GPIO_PTR5, GPIO_PTR6, GPIO_PTR7,
-
- /* PTS */
- GPIO_PTS0, GPIO_PTS1, GPIO_PTS2, GPIO_PTS3,
- GPIO_PTS4, GPIO_PTS5, GPIO_PTS6, GPIO_PTS7,
-
- /* PTT */
- GPIO_PTT0, GPIO_PTT1, GPIO_PTT2, GPIO_PTT3,
- GPIO_PTT4, GPIO_PTT5, GPIO_PTT6, GPIO_PTT7,
-
- /* PTU */
- GPIO_PTU0, GPIO_PTU1, GPIO_PTU2, GPIO_PTU3,
- GPIO_PTU4, GPIO_PTU5, GPIO_PTU6, GPIO_PTU7,
-
- /* PTV */
- GPIO_PTV0, GPIO_PTV1, GPIO_PTV2, GPIO_PTV3,
- GPIO_PTV4, GPIO_PTV5, GPIO_PTV6, GPIO_PTV7,
-
- /* PTW */
- GPIO_PTW0, GPIO_PTW1, GPIO_PTW2, GPIO_PTW3,
- GPIO_PTW4, GPIO_PTW5, GPIO_PTW6, GPIO_PTW7,
-
- /* PTX */
- GPIO_PTX0, GPIO_PTX1, GPIO_PTX2, GPIO_PTX3,
- GPIO_PTX4, GPIO_PTX5, GPIO_PTX6, GPIO_PTX7,
-
- /* PTY */
- GPIO_PTY0, GPIO_PTY1, GPIO_PTY2, GPIO_PTY3,
- GPIO_PTY4, GPIO_PTY5, GPIO_PTY6, GPIO_PTY7,
-
- /* PTZ */
- GPIO_PTZ0, GPIO_PTZ1, GPIO_PTZ2, GPIO_PTZ3,
- GPIO_PTZ4, GPIO_PTZ5, GPIO_PTZ6, GPIO_PTZ7,
-
-
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN_BS, GPIO_FN_RDWR, GPIO_FN_WE1, GPIO_FN_RDY,
- GPIO_FN_ET0_MDC, GPIO_FN_ET0_MDIO,
- GPIO_FN_ET1_MDC, GPIO_FN_ET1_MDIO,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN_IRQ15, GPIO_FN_IRQ14, GPIO_FN_IRQ13, GPIO_FN_IRQ12,
- GPIO_FN_IRQ11, GPIO_FN_IRQ10, GPIO_FN_IRQ9, GPIO_FN_IRQ8,
- GPIO_FN_ON_NRE, GPIO_FN_ON_NWE, GPIO_FN_ON_NWP, GPIO_FN_ON_NCE0,
- GPIO_FN_ON_R_B0, GPIO_FN_ON_ALE, GPIO_FN_ON_CLE,
- GPIO_FN_TCLK,
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN_IRQ7, GPIO_FN_IRQ6, GPIO_FN_IRQ5, GPIO_FN_IRQ4,
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_PWMU0, GPIO_FN_PWMU1, GPIO_FN_PWMU2, GPIO_FN_PWMU3,
- GPIO_FN_PWMU4, GPIO_FN_PWMU5,
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN_SP0_MOSI, GPIO_FN_SP0_MISO, GPIO_FN_SP0_SCK,
- GPIO_FN_SP0_SCK_FB, GPIO_FN_SP0_SS0, GPIO_FN_SP0_SS1,
- GPIO_FN_SP0_SS2, GPIO_FN_SP0_SS3, GPIO_FN_DREQ0,
- GPIO_FN_DACK0, GPIO_FN_TEND0,
-
- /* PTE (mobule: RMII) */
- GPIO_FN_RMII0_CRS_DV, GPIO_FN_RMII0_TXD1, GPIO_FN_RMII0_TXD0,
- GPIO_FN_RMII0_TXEN, GPIO_FN_RMII0_REFCLK, GPIO_FN_RMII0_RXD1,
- GPIO_FN_RMII0_RXD0, GPIO_FN_RMII0_RX_ER,
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN_RMII1_CRS_DV, GPIO_FN_RMII1_TXD1, GPIO_FN_RMII1_TXD0,
- GPIO_FN_RMII1_TXEN, GPIO_FN_RMII1_REFCLK, GPIO_FN_RMII1_RXD1,
- GPIO_FN_RMII1_RXD0, GPIO_FN_RMII1_RX_ER, GPIO_FN_RAC_RI,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN_BOOTFMS, GPIO_FN_BOOTWP,
- GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_SERIRQ, GPIO_FN_WDTOVF,
- GPIO_FN_LPCPD, GPIO_FN_LDRQ, GPIO_FN_MMCCLK, GPIO_FN_MMCCMD,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN_SP1_MOSI, GPIO_FN_SP1_MISO,
- GPIO_FN_SP1_SCK, GPIO_FN_SP1_SCK_FB,
- GPIO_FN_SP1_SS0, GPIO_FN_SP1_SS1,
- GPIO_FN_WP, GPIO_FN_FMS0, GPIO_FN_TEND1, GPIO_FN_DREQ1,
- GPIO_FN_DACK1, GPIO_FN_ADTRG1, GPIO_FN_ADTRG0,
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
- GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
- GPIO_FN_SD_WP, GPIO_FN_SD_CD, GPIO_FN_SD_CLK, GPIO_FN_SD_CMD,
- GPIO_FN_SD_D3, GPIO_FN_SD_D2, GPIO_FN_SD_D1, GPIO_FN_SD_D0,
-
- /* PTJ (mobule: SCIF234) */
- GPIO_FN_RTS3, GPIO_FN_CTS3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_RTS4, GPIO_FN_RXD4, GPIO_FN_TXD4,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN_COM2_TXD, GPIO_FN_COM2_RXD, GPIO_FN_COM2_RTS,
- GPIO_FN_COM2_CTS, GPIO_FN_COM2_DTR, GPIO_FN_COM2_DSR,
- GPIO_FN_COM2_DCD, GPIO_FN_CLKOUT,
- GPIO_FN_SCK2, GPIO_FN_SCK4, GPIO_FN_SCK3,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN_RAC_RXD, GPIO_FN_RAC_RTS, GPIO_FN_RAC_CTS,
- GPIO_FN_RAC_DTR, GPIO_FN_RAC_DSR, GPIO_FN_RAC_DCD,
- GPIO_FN_RAC_TXD, GPIO_FN_RXD2, GPIO_FN_CS5,
- GPIO_FN_CS6, GPIO_FN_AUDSYNC, GPIO_FN_AUDCK,
- GPIO_FN_TXD2,
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN_CS4, GPIO_FN_RD, GPIO_FN_WE0, GPIO_FN_CS0,
- GPIO_FN_SDA6, GPIO_FN_SCL6, GPIO_FN_SDA7, GPIO_FN_SCL7,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN_VBUS_EN, GPIO_FN_VBUS_OC, GPIO_FN_JMCTCK,
- GPIO_FN_JMCTMS, GPIO_FN_JMCTDO, GPIO_FN_JMCTDI,
- GPIO_FN_JMCTRST,
- GPIO_FN_SGPIO1_CLK, GPIO_FN_SGPIO1_LOAD, GPIO_FN_SGPIO1_DI,
- GPIO_FN_SGPIO1_DO, GPIO_FN_SUB_CLKIN,
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN_SGPIO0_CLK, GPIO_FN_SGPIO0_LOAD, GPIO_FN_SGPIO0_DI,
- GPIO_FN_SGPIO0_DO, GPIO_FN_SGPIO2_CLK, GPIO_FN_SGPIO2_LOAD,
- GPIO_FN_SGPIO2_DI, GPIO_FN_SGPIO2_DO, GPIO_FN_COM1_TXD,
- GPIO_FN_COM1_RXD, GPIO_FN_COM1_RTS, GPIO_FN_COM1_CTS,
-
- /* PTQ (mobule: LPC) */
- GPIO_FN_LAD3, GPIO_FN_LAD2, GPIO_FN_LAD1, GPIO_FN_LAD0,
- GPIO_FN_LFRAME, GPIO_FN_LRESET, GPIO_FN_LCLK,
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN_DDC3, GPIO_FN_DDC2, GPIO_FN_SDA2, GPIO_FN_SCL2,
- GPIO_FN_SDA1, GPIO_FN_SCL1, GPIO_FN_SDA0, GPIO_FN_SCL0,
- GPIO_FN_SDA8, GPIO_FN_SCL8,
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN_DDC1, GPIO_FN_DDC0, GPIO_FN_SDA5, GPIO_FN_SCL5,
- GPIO_FN_SDA4, GPIO_FN_SCL4, GPIO_FN_SDA3, GPIO_FN_SCL3,
- GPIO_FN_SDA9, GPIO_FN_SCL9,
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN_PWMX7, GPIO_FN_PWMX6, GPIO_FN_PWMX5, GPIO_FN_PWMX4,
- GPIO_FN_PWMX3, GPIO_FN_PWMX2, GPIO_FN_PWMX1, GPIO_FN_PWMX0,
- GPIO_FN_AUDATA3, GPIO_FN_AUDATA2, GPIO_FN_AUDATA1,
- GPIO_FN_AUDATA0, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN_LGPIO7, GPIO_FN_LGPIO6, GPIO_FN_LGPIO5, GPIO_FN_LGPIO4,
- GPIO_FN_LGPIO3, GPIO_FN_LGPIO2, GPIO_FN_LGPIO1, GPIO_FN_LGPIO0,
- GPIO_FN_APMONCTL_O, GPIO_FN_APMPWBTOUT_O, GPIO_FN_APMSCI_O,
- GPIO_FN_APMVDDON, GPIO_FN_APMSLPBTN, GPIO_FN_APMPWRBTN,
- GPIO_FN_APMS5N, GPIO_FN_APMS3N,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
- GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
- GPIO_FN_COM2_RI, GPIO_FN_R_SPI_MOSI, GPIO_FN_R_SPI_MISO,
- GPIO_FN_R_SPI_RSPCK, GPIO_FN_R_SPI_SSL0, GPIO_FN_R_SPI_SSL1,
- GPIO_FN_EVENT7, GPIO_FN_EVENT6, GPIO_FN_VBIOS_DI,
- GPIO_FN_VBIOS_DO, GPIO_FN_VBIOS_CLK, GPIO_FN_VBIOS_CS,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
- GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
- GPIO_FN_EVENT5, GPIO_FN_EVENT4, GPIO_FN_EVENT3, GPIO_FN_EVENT2,
- GPIO_FN_EVENT1, GPIO_FN_EVENT0, GPIO_FN_CTS4, GPIO_FN_CTS2,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
- GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
- GPIO_FN_RTS2, GPIO_FN_SIM_D, GPIO_FN_SIM_CLK, GPIO_FN_SIM_RST,
-
- /* PTY (mobule: LBSC) */
- GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
- GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN_MMCDAT7, GPIO_FN_MMCDAT6, GPIO_FN_MMCDAT5,
- GPIO_FN_MMCDAT4, GPIO_FN_MMCDAT3, GPIO_FN_MMCDAT2,
- GPIO_FN_MMCDAT1, GPIO_FN_MMCDAT0,
- GPIO_FN_ON_DQ7, GPIO_FN_ON_DQ6, GPIO_FN_ON_DQ5, GPIO_FN_ON_DQ4,
- GPIO_FN_ON_DQ3, GPIO_FN_ON_DQ2, GPIO_FN_ON_DQ1, GPIO_FN_ON_DQ0,
-};
-
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_SDHI_TX,
- SHDMA_SLAVE_SDHI_RX,
- SHDMA_SLAVE_MMCIF_TX,
- SHDMA_SLAVE_MMCIF_RX,
- SHDMA_SLAVE_SCIF2_TX,
- SHDMA_SLAVE_SCIF2_RX,
- SHDMA_SLAVE_SCIF3_TX,
- SHDMA_SLAVE_SCIF3_RX,
- SHDMA_SLAVE_SCIF4_TX,
- SHDMA_SLAVE_SCIF4_RX,
- SHDMA_SLAVE_RIIC0_TX,
- SHDMA_SLAVE_RIIC0_RX,
- SHDMA_SLAVE_RIIC1_TX,
- SHDMA_SLAVE_RIIC1_RX,
- SHDMA_SLAVE_RIIC2_TX,
- SHDMA_SLAVE_RIIC2_RX,
- SHDMA_SLAVE_RIIC3_TX,
- SHDMA_SLAVE_RIIC3_RX,
- SHDMA_SLAVE_RIIC4_TX,
- SHDMA_SLAVE_RIIC4_RX,
- SHDMA_SLAVE_RIIC5_TX,
- SHDMA_SLAVE_RIIC5_RX,
- SHDMA_SLAVE_RIIC6_TX,
- SHDMA_SLAVE_RIIC6_RX,
- SHDMA_SLAVE_RIIC7_TX,
- SHDMA_SLAVE_RIIC7_RX,
- SHDMA_SLAVE_RIIC8_TX,
- SHDMA_SLAVE_RIIC8_RX,
- SHDMA_SLAVE_RIIC9_TX,
- SHDMA_SLAVE_RIIC9_RX,
- SHDMA_SLAVE_RSPI_TX,
- SHDMA_SLAVE_RSPI_RX,
-};
-#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
deleted file mode 100644
index 37f42071e7d3b7..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7785.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH7785_H__
-#define __ASM_SH7785_H__
-
-/* Boot Mode Pins:
- *
- * MODE0: CPG - Initial Pck/Bck Frequency [FRQMR1]
- * MODE1: CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1]
- * MODE2: CPG - Reserved (L: Normal operation)
- * MODE3: CPG - Reserved (L: Normal operation)
- * MODE4: CPG - Initial PLL setting (72x/36x)
- * MODE5: LBSC - Area0 Memory Type / Bus Width [CS0BCR.8]
- * MODE6: LBSC - Area0 Memory Type / Bus Width [CS0BCR.9]
- * MODE7: LBSC - Area0 Memory Type / Bus Width [CS0BCR.3]
- * MODE8: LBSC - Endian Mode (L: Big, H: Little) [BCR.31]
- * MODE9: LBSC - Master/Slave Mode (L: Slave) [BCR.30]
- * MODE10: CPG - Clock Input (L: Ext Clk, H: Crystal)
- * MODE11: PCI - Pin Mode (LL: PCI host, LH: PCI slave)
- * MODE12: PCI - Pin Mode (HL: Local bus, HH: DU)
- * MODE13: Boot Address Mode (L: 29-bit, H: 32-bit)
- * MODE14: Reserved (H: Normal operation)
- *
- * More information in sh7785 manual Rev.1.00, page 1628.
- */
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
- GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
-
- /* PK */
- GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
- GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
-
- /* PL */
- GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
- GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
-
- /* PM */
- GPIO_PM1, GPIO_PM0,
-
- /* PN */
- GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
- GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
-
- /* PP */
- GPIO_PP5, GPIO_PP4,
- GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
-
- /* PQ */
- GPIO_PQ4,
- GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
-
- /* PR */
- GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
-
- GPIO_FN_D63_AD31,
- GPIO_FN_D62_AD30,
- GPIO_FN_D61_AD29,
- GPIO_FN_D60_AD28,
- GPIO_FN_D59_AD27,
- GPIO_FN_D58_AD26,
- GPIO_FN_D57_AD25,
- GPIO_FN_D56_AD24,
- GPIO_FN_D55_AD23,
- GPIO_FN_D54_AD22,
- GPIO_FN_D53_AD21,
- GPIO_FN_D52_AD20,
- GPIO_FN_D51_AD19,
- GPIO_FN_D50_AD18,
- GPIO_FN_D49_AD17_DB5,
- GPIO_FN_D48_AD16_DB4,
- GPIO_FN_D47_AD15_DB3,
- GPIO_FN_D46_AD14_DB2,
- GPIO_FN_D45_AD13_DB1,
- GPIO_FN_D44_AD12_DB0,
- GPIO_FN_D43_AD11_DG5,
- GPIO_FN_D42_AD10_DG4,
- GPIO_FN_D41_AD9_DG3,
- GPIO_FN_D40_AD8_DG2,
- GPIO_FN_D39_AD7_DG1,
- GPIO_FN_D38_AD6_DG0,
- GPIO_FN_D37_AD5_DR5,
- GPIO_FN_D36_AD4_DR4,
- GPIO_FN_D35_AD3_DR3,
- GPIO_FN_D34_AD2_DR2,
- GPIO_FN_D33_AD1_DR1,
- GPIO_FN_D32_AD0_DR0,
- GPIO_FN_REQ1,
- GPIO_FN_REQ2,
- GPIO_FN_REQ3,
- GPIO_FN_GNT1,
- GPIO_FN_GNT2,
- GPIO_FN_GNT3,
- GPIO_FN_MMCCLK,
- GPIO_FN_D31,
- GPIO_FN_D30,
- GPIO_FN_D29,
- GPIO_FN_D28,
- GPIO_FN_D27,
- GPIO_FN_D26,
- GPIO_FN_D25,
- GPIO_FN_D24,
- GPIO_FN_D23,
- GPIO_FN_D22,
- GPIO_FN_D21,
- GPIO_FN_D20,
- GPIO_FN_D19,
- GPIO_FN_D18,
- GPIO_FN_D17,
- GPIO_FN_D16,
- GPIO_FN_SCIF1_SCK,
- GPIO_FN_SCIF1_RXD,
- GPIO_FN_SCIF1_TXD,
- GPIO_FN_SCIF0_CTS,
- GPIO_FN_INTD,
- GPIO_FN_FCE,
- GPIO_FN_SCIF0_RTS,
- GPIO_FN_HSPI_CS,
- GPIO_FN_FSE,
- GPIO_FN_SCIF0_SCK,
- GPIO_FN_HSPI_CLK,
- GPIO_FN_FRE,
- GPIO_FN_SCIF0_RXD,
- GPIO_FN_HSPI_RX,
- GPIO_FN_FRB,
- GPIO_FN_SCIF0_TXD,
- GPIO_FN_HSPI_TX,
- GPIO_FN_FWE,
- GPIO_FN_SCIF5_TXD,
- GPIO_FN_HAC1_SYNC,
- GPIO_FN_SSI1_WS,
- GPIO_FN_SIOF_TXD_PJ,
- GPIO_FN_HAC0_SDOUT,
- GPIO_FN_SSI0_SDATA,
- GPIO_FN_SIOF_RXD_PJ,
- GPIO_FN_HAC0_SDIN,
- GPIO_FN_SSI0_SCK,
- GPIO_FN_SIOF_SYNC_PJ,
- GPIO_FN_HAC0_SYNC,
- GPIO_FN_SSI0_WS,
- GPIO_FN_SIOF_MCLK_PJ,
- GPIO_FN_HAC_RES,
- GPIO_FN_SIOF_SCK_PJ,
- GPIO_FN_HAC0_BITCLK,
- GPIO_FN_SSI0_CLK,
- GPIO_FN_HAC1_BITCLK,
- GPIO_FN_SSI1_CLK,
- GPIO_FN_TCLK,
- GPIO_FN_IOIS16,
- GPIO_FN_STATUS0,
- GPIO_FN_DRAK0_PK3,
- GPIO_FN_STATUS1,
- GPIO_FN_DRAK1_PK2,
- GPIO_FN_DACK2,
- GPIO_FN_SCIF2_TXD,
- GPIO_FN_MMCCMD,
- GPIO_FN_SIOF_TXD_PK,
- GPIO_FN_DACK3,
- GPIO_FN_SCIF2_SCK,
- GPIO_FN_MMCDAT,
- GPIO_FN_SIOF_SCK_PK,
- GPIO_FN_DREQ0,
- GPIO_FN_DREQ1,
- GPIO_FN_DRAK0_PK1,
- GPIO_FN_DRAK1_PK0,
- GPIO_FN_DREQ2,
- GPIO_FN_INTB,
- GPIO_FN_DREQ3,
- GPIO_FN_INTC,
- GPIO_FN_DRAK2,
- GPIO_FN_CE2A,
- GPIO_FN_IRL4,
- GPIO_FN_FD4,
- GPIO_FN_IRL5,
- GPIO_FN_FD5,
- GPIO_FN_IRL6,
- GPIO_FN_FD6,
- GPIO_FN_IRL7,
- GPIO_FN_FD7,
- GPIO_FN_DRAK3,
- GPIO_FN_CE2B,
- GPIO_FN_BREQ_BSACK,
- GPIO_FN_BACK_BSREQ,
- GPIO_FN_SCIF5_RXD,
- GPIO_FN_HAC1_SDIN,
- GPIO_FN_SSI1_SCK,
- GPIO_FN_SCIF5_SCK,
- GPIO_FN_HAC1_SDOUT,
- GPIO_FN_SSI1_SDATA,
- GPIO_FN_SCIF3_TXD,
- GPIO_FN_FCLE,
- GPIO_FN_SCIF3_RXD,
- GPIO_FN_FALE,
- GPIO_FN_SCIF3_SCK,
- GPIO_FN_FD0,
- GPIO_FN_SCIF4_TXD,
- GPIO_FN_FD1,
- GPIO_FN_SCIF4_RXD,
- GPIO_FN_FD2,
- GPIO_FN_SCIF4_SCK,
- GPIO_FN_FD3,
- GPIO_FN_DEVSEL_DCLKOUT,
- GPIO_FN_STOP_CDE,
- GPIO_FN_LOCK_ODDF,
- GPIO_FN_TRDY_DISPL,
- GPIO_FN_IRDY_HSYNC,
- GPIO_FN_PCIFRAME_VSYNC,
- GPIO_FN_INTA,
- GPIO_FN_GNT0_GNTIN,
- GPIO_FN_REQ0_REQOUT,
- GPIO_FN_PERR,
- GPIO_FN_SERR,
- GPIO_FN_WE7_CBE3,
- GPIO_FN_WE6_CBE2,
- GPIO_FN_WE5_CBE1,
- GPIO_FN_WE4_CBE0,
- GPIO_FN_SCIF2_RXD,
- GPIO_FN_SIOF_RXD,
- GPIO_FN_MRESETOUT,
- GPIO_FN_IRQOUT,
-};
-
-#endif /* __ASM_SH7785_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
deleted file mode 100644
index d6cce65b48713f..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sh7786.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on sh7785.h
- */
-
-#ifndef __CPU_SH7786_H__
-#define __CPU_SH7786_H__
-
-#include <linux/io.h>
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5,
-
- /* PH */
- GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* PJ */
- GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
- GPIO_PJ3, GPIO_PJ2, GPIO_PJ1,
-
- /* DU */
- GPIO_FN_DCLKIN, GPIO_FN_DCLKOUT, GPIO_FN_ODDF,
- GPIO_FN_VSYNC, GPIO_FN_HSYNC, GPIO_FN_CDE, GPIO_FN_DISP,
- GPIO_FN_DR0, GPIO_FN_DG0, GPIO_FN_DB0,
- GPIO_FN_DR1, GPIO_FN_DG1, GPIO_FN_DB1,
- GPIO_FN_DR2, GPIO_FN_DG2, GPIO_FN_DB2,
- GPIO_FN_DR3, GPIO_FN_DG3, GPIO_FN_DB3,
- GPIO_FN_DR4, GPIO_FN_DG4, GPIO_FN_DB4,
- GPIO_FN_DR5, GPIO_FN_DG5, GPIO_FN_DB5,
-
- /* Eth */
- GPIO_FN_ETH_MAGIC, GPIO_FN_ETH_LINK, GPIO_FN_ETH_TX_ER,
- GPIO_FN_ETH_TX_EN, GPIO_FN_ETH_MDIO, GPIO_FN_ETH_RX_CLK,
- GPIO_FN_ETH_MDC, GPIO_FN_ETH_COL, GPIO_FN_ETH_TX_CLK,
- GPIO_FN_ETH_CRS, GPIO_FN_ETH_RX_DV, GPIO_FN_ETH_RX_ER,
- GPIO_FN_ETH_TXD3, GPIO_FN_ETH_TXD2, GPIO_FN_ETH_TXD1, GPIO_FN_ETH_TXD0,
- GPIO_FN_ETH_RXD3, GPIO_FN_ETH_RXD2, GPIO_FN_ETH_RXD1, GPIO_FN_ETH_RXD0,
-
- /* HSPI */
- GPIO_FN_HSPI_CLK, GPIO_FN_HSPI_CS, GPIO_FN_HSPI_RX, GPIO_FN_HSPI_TX,
-
- /* SCIF0 */
- GPIO_FN_SCIF0_CTS, GPIO_FN_SCIF0_RTS, GPIO_FN_SCIF0_SCK,
- GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_TXD,
-
- /* SCIF1 */
- GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
-
- /* SCIF3 */
- GPIO_FN_SCIF3_SCK, GPIO_FN_SCIF3_RXD, GPIO_FN_SCIF3_TXD,
-
- /* SCIF4 */
- GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
-
- /* SCIF5 */
- GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
-
- /* LBSC */
- GPIO_FN_BREQ, GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* FLCTL */
- GPIO_FN_FALE, GPIO_FN_FRB, GPIO_FN_FSTATUS,
- GPIO_FN_FSE, GPIO_FN_FCLE,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* USB */
- GPIO_FN_USB_OVC0, GPIO_FN_USB_PENC0,
- GPIO_FN_USB_OVC1, GPIO_FN_USB_PENC1,
-
- /* HAC */
- GPIO_FN_HAC_RES,
- GPIO_FN_HAC0_SDOUT, GPIO_FN_HAC0_SDIN,
- GPIO_FN_HAC0_SYNC, GPIO_FN_HAC0_BITCLK,
- GPIO_FN_HAC1_SDOUT, GPIO_FN_HAC1_SDIN,
- GPIO_FN_HAC1_SYNC, GPIO_FN_HAC1_BITCLK,
-
- /* SSI */
- GPIO_FN_SSI0_SDATA, GPIO_FN_SSI0_SCK, GPIO_FN_SSI0_WS, GPIO_FN_SSI0_CLK,
- GPIO_FN_SSI1_SDATA, GPIO_FN_SSI1_SCK, GPIO_FN_SSI1_WS, GPIO_FN_SSI1_CLK,
- GPIO_FN_SSI2_SDATA, GPIO_FN_SSI2_SCK, GPIO_FN_SSI2_WS,
- GPIO_FN_SSI3_SDATA, GPIO_FN_SSI3_SCK, GPIO_FN_SSI3_WS,
-
- /* SDIF1 */
- GPIO_FN_SDIF1CMD, GPIO_FN_SDIF1CD, GPIO_FN_SDIF1WP, GPIO_FN_SDIF1CLK,
- GPIO_FN_SDIF1D3, GPIO_FN_SDIF1D2, GPIO_FN_SDIF1D1, GPIO_FN_SDIF1D0,
-
- /* SDIF0 */
- GPIO_FN_SDIF0CMD, GPIO_FN_SDIF0CD, GPIO_FN_SDIF0WP, GPIO_FN_SDIF0CLK,
- GPIO_FN_SDIF0D3, GPIO_FN_SDIF0D2, GPIO_FN_SDIF0D1, GPIO_FN_SDIF0D0,
-
- /* TMU */
- GPIO_FN_TCLK,
-
- /* INTC */
- GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
-};
-
-static inline u32 sh7786_mm_sel(void)
-{
- return __raw_readl((const volatile void __iomem *)0xFC400020) & 0x7;
-}
-
-#endif /* __CPU_SH7786_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/shx3.h b/arch/sh/include/cpu-sh4/cpu/shx3.h
deleted file mode 100644
index f356810b0bea58..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/shx3.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SHX3_H
-#define __CPU_SHX3_H
-
-enum {
- /* PA */
- GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
- GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
-
- /* PB */
- GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
- GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
-
- /* PC */
- GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
- GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
-
- /* PD */
- GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
- GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
-
- /* PE */
- GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
- GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
-
- /* PF */
- GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
- GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
-
- /* PG */
- GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
- GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
-
- /* PH */
- GPIO_PH5, GPIO_PH4,
- GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
-
- /* SCIF */
- GPIO_FN_SCK3, GPIO_FN_TXD3, GPIO_FN_RXD3,
- GPIO_FN_SCK2, GPIO_FN_TXD2, GPIO_FN_RXD2,
- GPIO_FN_SCK1, GPIO_FN_TXD1, GPIO_FN_RXD1,
- GPIO_FN_SCK0, GPIO_FN_TXD0, GPIO_FN_RXD0,
-
- /* LBSC */
- GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
- GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
- GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
- GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
- GPIO_FN_WE3, GPIO_FN_WE2, GPIO_FN_CS6, GPIO_FN_CS5,
- GPIO_FN_CS4, GPIO_FN_CLKOUTENB, GPIO_FN_BREQ,
- GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
-
- /* DMAC */
- GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
- GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
- GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
- GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
-
- /* INTC */
- GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
- GPIO_FN_IRL3, GPIO_FN_IRL2, GPIO_FN_IRL1, GPIO_FN_IRL0,
- GPIO_FN_IRQOUT, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
-};
-
-#endif /* __CPU_SHX3_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
deleted file mode 100644
index 2cc5f55dcaddf4..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
-#define __ASM_CPU_SH4_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
deleted file mode 100644
index 81966e41fc213b..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/sq.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/sq.h
- *
- * Copyright (C) 2001, 2002, 2003 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#ifndef __ASM_CPU_SH4_SQ_H
-#define __ASM_CPU_SH4_SQ_H
-
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-/*
- * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
- * mapped to any physical address space. Since data is written (and aligned)
- * to 32-byte boundaries, we need to be sure that all allocations are aligned.
- */
-#define SQ_SIZE 32
-#define SQ_ALIGN_MASK (~(SQ_SIZE - 1))
-#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
-
-#define SQ_QACR0 (P4SEG_REG_BASE + 0x38)
-#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c)
-#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000)
-
-/* arch/sh/kernel/cpu/sh4/sq.c */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot);
-void sq_unmap(unsigned long vaddr);
-void sq_flush_range(unsigned long start, unsigned int len);
-
-#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
deleted file mode 100644
index fa7bcb398b8cca..00000000000000
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/cpu-sh4/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2009 Siemens AG
- * Copyright (C) 2009 Sitdikov Valentin
- */
-#ifndef __ASM_CPU_SH4_WATCHDOG_H
-#define __ASM_CPU_SH4_WATCHDOG_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
-/* Prefix definition */
-#define WTBST_HIGH 0x55
-/* Register definitions */
-#define WTCNT_R 0xffcc0010 /*WDTCNT*/
-#define WTCSR 0xffcc0004 /*WDTCSR*/
-#define WTCNT 0xffcc0000 /*WDTST*/
-#define WTST WTCNT
-#define WTBST 0xffcc0008 /*WDTBST*/
-/* Register definitions */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7723) || \
- defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define WTCNT 0xa4520000
-#define WTCSR 0xa4520004
-#else
-/* Register definitions */
-#define WTCNT 0xffc00008
-#define WTCSR 0xffc0000c
-#endif
-
-/* Bit definitions */
-#define WTCSR_TME 0x80
-#define WTCSR_WT 0x40
-#define WTCSR_RSTS 0x20
-#define WTCSR_WOVF 0x10
-#define WTCSR_IOVF 0x08
-
-#endif /* __ASM_CPU_SH4_WATCHDOG_H */
-
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
deleted file mode 100644
index bdbbba8a784a7b..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#include <linux/sh_intc.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
- defined(CONFIG_CPU_SUBTYPE_SH7730)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-#define DMTE0_IRQ evt2irq(0x800)
-#define DMTE4_IRQ evt2irq(0xb80)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMAE0_IRQ evt2irq(0x6c0)
-#define SH_DMAC_BASE0 0xFF608020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define DMTE0_IRQ evt2irq(0x800) /* DMAC0A*/
-#define DMTE4_IRQ evt2irq(0xb80) /* DMAC0B */
-#define DMTE6_IRQ evt2irq(0x700)
-#define DMTE8_IRQ evt2irq(0x740) /* DMAC1A */
-#define DMTE9_IRQ evt2irq(0x760)
-#define DMTE10_IRQ evt2irq(0xb00) /* DMAC1B */
-#define DMTE11_IRQ evt2irq(0xb20)
-#define DMAE0_IRQ evt2irq(0xbc0) /* DMA Error IRQ*/
-#define DMAE1_IRQ evt2irq(0xb40) /* DMA Error IRQ*/
-#define SH_DMAC_BASE0 0xFE008020
-#define SH_DMAC_BASE1 0xFDC08020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define DMTE0_IRQ evt2irq(0x640)
-#define DMTE4_IRQ evt2irq(0x780)
-#define DMTE6_IRQ evt2irq(0x7c0)
-#define DMTE8_IRQ evt2irq(0xd80)
-#define DMTE9_IRQ evt2irq(0xda0)
-#define DMTE10_IRQ evt2irq(0xdc0)
-#define DMTE11_IRQ evt2irq(0xde0)
-#define DMAE0_IRQ evt2irq(0x6c0) /* DMA Error IRQ */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFC818020
-#else /* SH7785 */
-#define DMTE0_IRQ evt2irq(0x620)
-#define DMTE4_IRQ evt2irq(0x6a0)
-#define DMTE6_IRQ evt2irq(0x880)
-#define DMTE8_IRQ evt2irq(0x8c0)
-#define DMTE9_IRQ evt2irq(0x8e0)
-#define DMTE10_IRQ evt2irq(0x900)
-#define DMTE11_IRQ evt2irq(0x920)
-#define DMAE0_IRQ evt2irq(0x6e0) /* DMA Error IRQ0 */
-#define DMAE1_IRQ evt2irq(0x940) /* DMA Error IRQ1 */
-#define SH_DMAC_BASE0 0xFC808020
-#define SH_DMAC_BASE1 0xFCC08020
-#endif
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4a/cpu/serial.h b/arch/sh/include/cpu-sh4a/cpu/serial.h
deleted file mode 100644
index fc206c0bf6fb06..00000000000000
--- a/arch/sh/include/cpu-sh4a/cpu/serial.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPU_SH4A_SERIAL_H
-#define __CPU_SH4A_SERIAL_H
-
-/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */
-extern struct plat_sci_port_ops sh7722_sci_port_ops;
-
-#endif /* __CPU_SH4A_SERIAL_H */
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
deleted file mode 100644
index fb44c299d0337e..00000000000000
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses. */
-#define PA_NORFLASH_ADDR 0x00000000
-#define PA_NORFLASH_SIZE 0x04000000
-
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x0010) /* PCI Connector detect control */
-#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR (PA_BCR+0x0900) /* */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF (-1)
-
-#define PA_BCR 0xa5000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
-#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
-#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x000a) /* PCI Connector detect control */
-#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
-#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
-#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
-#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
-#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
-#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
-#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
-#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
-#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
-#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
-#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
-#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
-#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
-#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
-#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
-#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
-
-#define PA_AX88796L 0xa5800400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_PCISCR (PA_BCR+0x0000)
-#define PA_IRLPRA (PA_BCR+0x0002)
-#define PA_IRLPRB (PA_BCR+0x0004)
-#define PA_IRLPRC (PA_BCR+0x0006)
-#define PA_IRLPRD (PA_BCR+0x0008)
-#define IRLCNTR1 (PA_BCR+0x0010)
-#define PA_IRLPRE (PA_BCR+0x000a)
-#define PA_IRLPRF (PA_BCR+0x000c)
-#define PA_EXIRLCR (PA_BCR+0x000e)
-#define PA_IRLMCR1 (PA_BCR+0x0010)
-#define PA_IRLMCR2 (PA_BCR+0x0012)
-#define PA_IRLSSR1 (PA_BCR+0x0014)
-#define PA_IRLSSR2 (PA_BCR+0x0016)
-#define PA_CFTCR (PA_BCR+0x0100)
-#define PA_CFPCR (PA_BCR+0x0102)
-#define PA_PCICR (PA_BCR+0x0110)
-#define PA_IVDRCTL (PA_BCR+0x0112)
-#define PA_IVDRSR (PA_BCR+0x0114)
-#define PA_PDRSTCR (PA_BCR+0x0116)
-#define PA_POFF (PA_BCR+0x0120)
-#define PA_LCDCR (PA_BCR+0x0130)
-#define PA_TPCR (PA_BCR+0x0140)
-#define PA_TPCKCR (PA_BCR+0x0142)
-#define PA_TPRSTR (PA_BCR+0x0144)
-#define PA_TPXPDR (PA_BCR+0x0146)
-#define PA_TPYPDR (PA_BCR+0x0148)
-#define PA_GPIOPFR (PA_BCR+0x0150)
-#define PA_GPIODR (PA_BCR+0x0152)
-#define PA_OBLED (PA_BCR+0x0154)
-#define PA_SWSR (PA_BCR+0x0156)
-#define PA_VERREG (PA_BCR+0x0158)
-#define PA_SMCR (PA_BCR+0x0200)
-#define PA_SMSMADR (PA_BCR+0x0202)
-#define PA_SMMR (PA_BCR+0x0204)
-#define PA_SMSADR1 (PA_BCR+0x0206)
-#define PA_SMSADR32 (PA_BCR+0x0244)
-#define PA_SMTRDR1 (PA_BCR+0x0246)
-#define PA_SMTRDR16 (PA_BCR+0x0264)
-#define PA_CU3MDR (PA_BCR+0x0300)
-#define PA_CU5MDR (PA_BCR+0x0302)
-#define PA_MMSR (PA_BCR+0x0400)
-
-#define IVDR_CK_ON 4 /* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE 200
-#define HL_NR_IRL 15
-
-#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#ifdef CONFIG_SH_R7785RP
-void highlander_plat_pinmux_setup(void);
-#else
-#define highlander_plat_pinmux_setup() do { } while (0)
-#endif
-
-#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
deleted file mode 100644
index 71241f0d02a19c..00000000000000
--- a/arch/sh/include/mach-common/mach/hp6xx.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
- */
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-#include <linux/sh_intc.h>
-
-#define HP680_BTN_IRQ evt2irq(0x600) /* IRQ0_IRQ */
-#define HP680_TS_IRQ evt2irq(0x660) /* IRQ3_IRQ */
-#define HP680_HD64461_IRQ evt2irq(0x680) /* IRQ4_IRQ */
-
-#define DAC_LCD_BRIGHTNESS 0
-#define DAC_SPEAKER_VOLUME 1
-
-#define PGDR_OPENED 0x01
-#define PGDR_MAIN_BATTERY_OUT 0x04
-#define PGDR_PLAY_BUTTON 0x08
-#define PGDR_REWIND_BUTTON 0x10
-#define PGDR_RECORD_BUTTON 0x20
-
-#define PHDR_TS_PEN_DOWN 0x08
-
-#define PJDR_LED_BLINK 0x02
-
-#define PKDR_LED_GREEN 0x10
-
-/* HP Palmtop 620lx/660lx speaker on/off */
-#define PKDR_SPEAKER 0x20
-
-#define SCPDR_TS_SCAN_ENABLE 0x20
-#define SCPDR_TS_SCAN_Y 0x02
-#define SCPDR_TS_SCAN_X 0x01
-
-#define SCPCR_TS_ENABLE 0x405
-#define SCPCR_TS_MASK 0xc0f
-
-#define ADC_CHANNEL_TS_Y 1
-#define ADC_CHANNEL_TS_X 2
-#define ADC_CHANNEL_BATTERY 3
-#define ADC_CHANNEL_BACKUP 4
-#define ADC_CHANNEL_CHARGE 5
-
-/* HP Jornada 680/690 speaker on/off */
-#define HD64461_GPADR_SPEAKER 0x01
-#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF 0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
-#define HD64461_GPBDR_LED_RED 0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR 0xa4000130
-#define PKDR 0xa4000132
-
-#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/mach-common/mach/lboxre2.h b/arch/sh/include/mach-common/mach/lboxre2.h
deleted file mode 100644
index 5b6bb8e3cf2847..00000000000000
--- a/arch/sh/include/mach-common/mach/lboxre2.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LBOXRE2_H
-#define __ASM_SH_LBOXRE2_H
-
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 support
- */
-#include <linux/sh_intc.h>
-
-#define IRQ_CF1 evt2irq(0x320) /* CF1 */
-#define IRQ_CF0 evt2irq(0x340) /* CF0 */
-#define IRQ_INTD evt2irq(0x360) /* INTD */
-#define IRQ_ETH1 evt2irq(0x380) /* Ether1 */
-#define IRQ_ETH0 evt2irq(0x3a0) /* Ether0 */
-#define IRQ_INTA evt2irq(0x3c0) /* INTA */
-
-void init_lboxre2_IRQ(void);
-
-#define __IO_PREFIX lboxre2
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
deleted file mode 100644
index c2d218cea74b65..00000000000000
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/magicpanelr2.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * I/O addresses and bitmasks for Magic Panel Release 2 board
- */
-
-#ifndef __ASM_SH_MAGICPANELR2_H
-#define __ASM_SH_MAGICPANELR2_H
-
-#include <linux/gpio.h>
-
-#define __IO_PREFIX mpr2
-#include <asm/io_generic.h>
-
-
-#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
-
-
-#define PA_LED PORT_PADR /* LED */
-
-
-/* BSC */
-#define CMNCR 0xA4FD0000UL
-#define CS0BCR 0xA4FD0004UL
-#define CS2BCR 0xA4FD0008UL
-#define CS3BCR 0xA4FD000CUL
-#define CS4BCR 0xA4FD0010UL
-#define CS5ABCR 0xA4FD0014UL
-#define CS5BBCR 0xA4FD0018UL
-#define CS6ABCR 0xA4FD001CUL
-#define CS6BBCR 0xA4FD0020UL
-#define CS0WCR 0xA4FD0024UL
-#define CS2WCR 0xA4FD0028UL
-#define CS3WCR 0xA4FD002CUL
-#define CS4WCR 0xA4FD0030UL
-#define CS5AWCR 0xA4FD0034UL
-#define CS5BWCR 0xA4FD0038UL
-#define CS6AWCR 0xA4FD003CUL
-#define CS6BWCR 0xA4FD0040UL
-
-
-/* usb */
-
-#define PORT_UTRCTL 0xA405012CUL
-#define PORT_UCLKCR_W 0xA40A0008UL
-
-#define INTC_ICR0 0xA414FEE0UL
-#define INTC_ICR1 0xA4140010UL
-#define INTC_ICR2 0xA4140012UL
-
-/* MTD */
-
-#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
-#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
-
-#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/mach-common/mach/mangle-port.h b/arch/sh/include/mach-common/mach/mangle-port.h
deleted file mode 100644
index dd5a761a52ee63..00000000000000
--- a/arch/sh/include/mach-common/mach/mangle-port.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SH version cribbed from the MIPS copy:
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __MACH_COMMON_MANGLE_PORT_H
-#define __MACH_COMMON_MANGLE_PORT_H
-
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time. Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses. The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) le16_to_cpu(x)
-# define __mem_ioswabw(x) (x)
-# define ioswabl(x) le32_to_cpu(x)
-# define __mem_ioswabl(x) (x)
-# define ioswabq(x) le64_to_cpu(x)
-# define __mem_ioswabq(x) (x)
-
-#else
-
-# define ioswabb(x) (x)
-# define __mem_ioswabb(x) (x)
-# define ioswabw(x) (x)
-# define __mem_ioswabw(x) cpu_to_le16(x)
-# define ioswabl(x) (x)
-# define __mem_ioswabl(x) cpu_to_le32(x)
-# define ioswabq(x) (x)
-# define __mem_ioswabq(x) cpu_to_le32(x)
-
-#endif
-
-#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
deleted file mode 100644
index 0e2f9ab1197620..00000000000000
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA. should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
-#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts. i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA 8
-#define MICRODEV_IRQ_PCI_INTB 9
-#define MICRODEV_IRQ_PCI_INTC 10
-#define MICRODEV_IRQ_PCI_INTD 11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
deleted file mode 100644
index 0d7e483c7d3f53..00000000000000
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
-#define PA_CFCTL 0xa4000004 /* CF Timing control */
-#define PA_CFPOW 0xa4000006 /* CF Power control */
-#define PA_DISPCTL 0xa4000008 /* Display Timing control */
-#define PA_SDMPOW 0xa400000a /* SD Power control */
-#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extension detect control */
-#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
-#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */
-#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
-#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */
-#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-
-#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
-#define PA_VERREG 0xa4000032 /* FPGA Version Register */
-#define PA_INPORT 0xa4000034 /* KEY Input Port control */
-#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_BVERREG 0xa4000038 /* Board Revision Register */
-
-#define PA_AX88796L 0xaa000400 /* AX88796L Area */
-#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE 100
-
-#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
deleted file mode 100644
index 1915714263aab0..00000000000000
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* do nothing here by default */
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-common/mach/sdk7780.h b/arch/sh/include/mach-common/mach/sdk7780.h
deleted file mode 100644
index a27dbe4184b35b..00000000000000
--- a/arch/sh/include/mach-common/mach/sdk7780.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SDK7780_H
-#define __ASM_SH_RENESAS_SDK7780_H
-
-/*
- * linux/include/asm-sh/sdk7780.h
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa0800000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_USER PA_EXT4 /* User Expansion Space */
-
-#define PA_PERIPHERAL PA_AREA5_IO
-
-/* SRAM/Reserved */
-#define PA_RESERVED (PA_PERIPHERAL + 0)
-/* FPGA base address */
-#define PA_FPGA (PA_PERIPHERAL + 0x01000000)
-/* SMC LAN91C111 */
-#define PA_LAN (PA_PERIPHERAL + 0x01800000)
-
-
-#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */
-#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */
-#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */
-#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */
-#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */
-#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */
-#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */
-#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */
-#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */
-#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */
-#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */
-#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */
-#define PA_LED FPGA_SLEDR
-#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */
-#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */
-#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */
-#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */
-#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */
-#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */
-#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */
-#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */
-#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */
-#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */
-#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */
-#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */
-
-
-#define SDK7780_NR_IRL 15
-/* IDE/ATA interrupt */
-#define IRQ_CFCARD evt2irq(0x3c0)
-/* SMC interrupt */
-#define IRQ_ETHERNET evt2irq(0x2c0)
-
-
-/* arch/sh/boards/renesas/sdk7780/irq.c */
-void init_sdk7780_IRQ(void);
-
-#define __IO_PREFIX sdk7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/mach-common/mach/secureedge5410.h b/arch/sh/include/mach-common/mach/secureedge5410.h
deleted file mode 100644
index dfc68aa910033d..00000000000000
--- a/arch/sh/include/mach-common/mach/secureedge5410.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#define __IO_PREFIX snapgear
-#include <asm/io_generic.h>
-
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit Read Write
- * -----------------------------------------------
- * D0 DCD on ttySC1 power
- * D1 Reset Switch heatbeat
- * D2 ttySC0 CTS (7100) LAN
- * D3 - WAN
- * D4 ttySC0 DCD (7100) CONSOLE
- * D5 - ONLINE
- * D6 - VPN
- * D7 - DTR on ttySC1
- * D8 - ttySC0 RTS (7100)
- * D9 - ttySC0 DTR (7100)
- * D10 - RTC SCLK
- * D11 RTC DATA RTC DATA
- * D12 - RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/mach-common/mach/sh2007.h b/arch/sh/include/mach-common/mach/sh2007.h
deleted file mode 100644
index eeb12901a44a1b..00000000000000
--- a/arch/sh/include/mach-common/mach/sh2007.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SH2007_H
-#define __MACH_SH2007_H
-
-#define CS5BCR 0xff802050
-#define CS5WCR 0xff802058
-#define CS5PCR 0xff802070
-
-#define BUS_SZ8 1
-#define BUS_SZ16 2
-#define BUS_SZ32 3
-
-#define PCMCIA_IODYN 1
-#define PCMCIA_ATA 0
-#define PCMCIA_IO8 2
-#define PCMCIA_IO16 3
-#define PCMCIA_COMM8 4
-#define PCMCIA_COMM16 5
-#define PCMCIA_ATTR8 6
-#define PCMCIA_ATTR16 7
-
-#define TYPE_SRAM 0
-#define TYPE_PCMCIA 4
-
-/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWW5 0
-#define IWW6 3
-/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWD5 2
-#define IWRWD6 2
-/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRWS5 2
-#define IWRWS6 2
-/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRD5 2
-#define IWRRD6 2
-/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
-#define IWRRS5 0
-#define IWRRS6 2
-/* burst count (0-3:4,8,16,32) */
-#define BST5 0
-#define BST6 0
-/* bus size */
-#define SZ5 BUS_SZ16
-#define SZ6 BUS_SZ16
-/* RD hold for SRAM (0-1:0,1) */
-#define RDSPL5 0
-#define RDSPL6 0
-/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
-#define BW5 0
-#define BW6 0
-/* Multiplex (0-1:0,1) */
-#define MPX5 0
-#define MPX6 0
-/* device type */
-#define TYPE5 TYPE_PCMCIA
-#define TYPE6 TYPE_PCMCIA
-/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADS5 0
-#define ADS6 0
-/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define ADH5 0
-#define ADH6 0
-/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDS5 0
-#define RDS6 0
-/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define RDH5 0
-#define RDH6 0
-/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTS5 0
-#define WTS6 0
-/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
-#define WTH5 0
-#define WTH6 0
-/* BS hold (0-1:1,2) */
-#define BSH5 0
-#define BSH6 0
-/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define IW5 6 /* 60ns PIO mode 4 */
-#define IW6 15 /* 250ns */
-
-#define SAA5 PCMCIA_IODYN /* IDE area b4000000-b5ffffff */
-#define SAB5 PCMCIA_IODYN /* CF area b6000000-b7ffffff */
-#define PCWA5 0 /* additional wait A (0-3:0,15,30,50) */
-#define PCWB5 0 /* additional wait B (0-3:0,15,30,50) */
-/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
-#define PCIW5 12
-/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEDA5 2
-/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEDB5 4
-/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
-#define TEHA5 2
-/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
-#define TEHB5 3
-
-#define CS5BCR_D ((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)| \
- (IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)| \
- (SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
-#define CS5WCR_D ((ADS5<<28)|(ADH5<<24)|(RDS5<<20)| \
- (RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
-#define CS5PCR_D ((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)| \
- (PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)| \
- (TEDB5<<8)|(TEHA5<<4)|TEHB5)
-
-#define SMC0_BASE 0xb0800000 /* eth0 */
-#define SMC1_BASE 0xb0900000 /* eth1 */
-#define CF_BASE 0xb6100000 /* Compact Flash (I/O area) */
-#define IDE_BASE 0xb4000000 /* IDE */
-#define PC104_IO_BASE 0xb8000000
-#define PC104_MEM_BASE 0xba000000
-#define SMC_IO_SIZE 0x100
-
-#define CF_OFFSET 0x1f0
-#define IDE_OFFSET 0x170
-
-#endif /* __MACH_SH2007_H */
diff --git a/arch/sh/include/mach-common/mach/sh7763rdp.h b/arch/sh/include/mach-common/mach/sh7763rdp.h
deleted file mode 100644
index 301f85a1c044d2..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7763rdp.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH7763RDP_H
-#define __ASM_SH_SH7763RDP_H
-
-/*
- * linux/include/asm-sh/sh7763drp.h
- *
- * Copyright (C) 2008 Renesas Solutions
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-#include <asm/addrspace.h>
-
-/* clock control */
-#define MSTPCR1 0xFFC80038
-
-/* PORT */
-#define PORT_PSEL0 0xFFEF0070
-#define PORT_PSEL1 0xFFEF0072
-#define PORT_PSEL2 0xFFEF0074
-#define PORT_PSEL3 0xFFEF0076
-#define PORT_PSEL4 0xFFEF0078
-
-#define PORT_PACR 0xFFEF0000
-#define PORT_PCCR 0xFFEF0004
-#define PORT_PFCR 0xFFEF000A
-#define PORT_PGCR 0xFFEF000C
-#define PORT_PHCR 0xFFEF000E
-#define PORT_PICR 0xFFEF0010
-#define PORT_PJCR 0xFFEF0012
-#define PORT_PKCR 0xFFEF0014
-#define PORT_PLCR 0xFFEF0016
-#define PORT_PMCR 0xFFEF0018
-#define PORT_PNCR 0xFFEF001A
-
-/* FPGA */
-#define CPLD_BOARD_ID_ERV_REG 0xB1000000
-#define CPLD_CPLD_CMD_REG 0xB1000006
-
-/*
- * USB SH7763RDP board can use Host only.
- */
-#define USB_USBHSC 0xFFEC80f0
-
-/* arch/sh/boards/renesas/sh7763rdp/irq.c */
-void init_sh7763rdp_IRQ(void);
-int sh7763rdp_irq_demux(int irq);
-#define __IO_PREFIX sh7763rdp
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
deleted file mode 100644
index 0f3dc3a1329e36..00000000000000
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_RENESAS_SH7785LCR_H
-#define __ASM_SH_RENESAS_SH7785LCR_H
-
-/*
- * This board has 2 physical memory maps.
- * It can be changed with DIP switch(S2-5).
- *
- * phys address | S2-5 = OFF | S2-5 = ON
- * -----------------------------+---------------+---------------
- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
- * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
- * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
- * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
- * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
- * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
- * 0x14000000 - 0x17ffffff(CS5) | reserved | USB
- * 0x18000000 - 0x1bffffff(CS6) | reserved | SD
- * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
- *
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define PLD_BASE_ADDR 0x04000000
-#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
-#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
-#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
-#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
-#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
-#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
-#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
-#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
-
-#define PCA9564_ADDR 0x06000000 /* I2C */
-#define PCA9564_SIZE 0x00000100
-
-#define PCA9564_PROTO_32BIT_ADDR 0x14000000
-
-#define SM107_MEM_ADDR 0x10000000
-#define SM107_MEM_SIZE 0x00e00000
-#define SM107_REG_ADDR 0x13e00000
-#define SM107_REG_SIZE 0x00200000
-
-#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
-#define R8A66597_ADDR 0x14000000 /* USB */
-#define CG200_ADDR 0x18000000 /* SD */
-#else
-#define R8A66597_ADDR 0x08000000
-#define CG200_ADDR 0x0c000000
-#endif
-
-#define R8A66597_SIZE 0x00000100
-#define CG200_SIZE 0x00010000
-
-#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
-
diff --git a/arch/sh/include/mach-common/mach/shmin.h b/arch/sh/include/mach-common/mach/shmin.h
deleted file mode 100644
index c2c3e26d145312..00000000000000
--- a/arch/sh/include/mach-common/mach/shmin.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
deleted file mode 100644
index 54df351de5e40d..00000000000000
--- a/arch/sh/include/mach-common/mach/titan.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Platform definitions for Titan
- */
-#ifndef _ASM_SH_TITAN_H
-#define _ASM_SH_TITAN_H
-
-#include <linux/sh_intc.h>
-
-#define __IO_PREFIX titan
-#include <asm/io_generic.h>
-
-/* IRQ assignments */
-#define TITAN_IRQ_WAN evt2irq(0x240) /* eth0 (WAN) */
-#define TITAN_IRQ_LAN evt2irq(0x2a0) /* eth1 (LAN) */
-#define TITAN_IRQ_MPCIA evt2irq(0x300) /* mPCI A */
-#define TITAN_IRQ_MPCIB evt2irq(0x360) /* mPCI B */
-#define TITAN_IRQ_USB evt2irq(0x360) /* USB */
-
-#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h
deleted file mode 100644
index 6c9bff3f93f143..00000000000000
--- a/arch/sh/include/mach-common/mach/urquell.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_URQUELL_H
-#define __MACH_URQUELL_H
-
-/*
- * ------ 0x00000000 ------------------------------------
- * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
- * -----+ 0x04000000 ------------------------------------
- * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
- * -----+ 0x08000000 ------------------------------------
- * CS2 | DDR3
- * CS3 |
- * -----+ 0x10000000 ------------------------------------
- * CS4 | PCIe
- * -----+ 0x14000000 ------------------------------------
- * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
- * -----+ 0x18000000 ------------------------------------
- * CS6 | ATA, NAND FLASH
- * -----+ 0x1c000000 ------------------------------------
- * CS7 | SH7786 register
- * -----+------------------------------------------------
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define CS1_BASE 0x05000000
-#define CS5_BASE 0x15000000
-#define FPGA_BASE CS1_BASE
-
-#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
-#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
-
-#define SRSTR_OFS 0x0000 /* System reset register */
-#define BDMR_OFS 0x0010 /* Board operating mode resister */
-#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
-#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
-#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
-#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
-#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
-#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
-#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
-#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
-#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
-#define SLEDR_OFS 0x0130 /* LED control resister */
-#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
-#define FPVERR_OFS 0x0150 /* FPGA Version register */
-#define FPDATER_OFS 0x0160 /* FPGA Date register */
-#define FPYEARR_OFS 0x0170 /* FPGA Year register */
-#define TCLKCR_OFS 0x0180 /* TCLK Control register */
-#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
-#define FPODR_OFS 0x1010 /* Output port data register */
-#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
-#define FPINDR_OFS 0x1030 /* Input port data register */
-#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
-#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
-#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
-#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
-#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
-#define LATCHCR_OFS 0x3000 /* Latch control register */
-#define LATCUAR_OFS 0x3010 /* Latch upper address register */
-#define LATCLAR_OFS 0x3012 /* Latch lower address register */
-#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
-#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
-
-#define CHARLED_OFS 0x2000 /* Character LED */
-
-#endif /* __MACH_URQUELL_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
deleted file mode 100644
index a773a763843aaa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/dma.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/dma.h
- *
- * Copyright (C) 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_DMA_H
-#define __ASM_SH_DREAMCAST_DMA_H
-
-/* Number of DMA channels */
-#define G2_NR_DMA_CHANNELS 4
-
-/* Channels for cascading */
-#define PVR2_CASCADE_CHAN 2
-#define G2_CASCADE_CHAN 3
-
-/* PVR2 DMA Registers */
-#define PVR2_DMA_BASE 0xa05f6800
-#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0)
-#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4)
-#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8)
-#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132)
-#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136)
-
-/* G2 DMA Register */
-#define G2_DMA_BASE 0xa05f7800
-
-#endif /* __ASM_SH_DREAMCAST_DMA_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
deleted file mode 100644
index 169bdf415d89aa..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/maple.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MAPLE_H
-#define __ASM_MAPLE_H
-
-#define MAPLE_PORTS 4
-#define MAPLE_PNP_INTERVAL HZ
-#define MAPLE_MAXPACKETS 8
-#define MAPLE_DMA_ORDER 14
-#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
-#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
- MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
-
-/* Maple Bus registers */
-#define MAPLE_BASE 0xa05f6c00
-#define MAPLE_DMAADDR (MAPLE_BASE+0x04)
-#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
-#define MAPLE_ENABLE (MAPLE_BASE+0x14)
-#define MAPLE_STATE (MAPLE_BASE+0x18)
-#define MAPLE_SPEED (MAPLE_BASE+0x80)
-#define MAPLE_RESET (MAPLE_BASE+0x8c)
-
-#define MAPLE_MAGIC 0x6155404f
-#define MAPLE_2MBPS 0
-#define MAPLE_TIMEOUT(n) ((n)<<15)
-
-/* Function codes */
-#define MAPLE_FUNC_CONTROLLER 0x001
-#define MAPLE_FUNC_MEMCARD 0x002
-#define MAPLE_FUNC_LCD 0x004
-#define MAPLE_FUNC_CLOCK 0x008
-#define MAPLE_FUNC_MICROPHONE 0x010
-#define MAPLE_FUNC_ARGUN 0x020
-#define MAPLE_FUNC_KEYBOARD 0x040
-#define MAPLE_FUNC_LIGHTGUN 0x080
-#define MAPLE_FUNC_PURUPURU 0x100
-#define MAPLE_FUNC_MOUSE 0x200
-
-#endif /* __ASM_MAPLE_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
deleted file mode 100644
index c037c1ec63a928..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/pci.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <mach-dreamcast/mach/sysasic.h>
-
-#define GAPSPCI_REGS 0x01001400
-#define GAPSPCI_DMA_BASE 0x01840000
-#define GAPSPCI_DMA_SIZE 32768
-#define GAPSPCI_BBA_CONFIG 0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE 0x2000
-
-#define GAPSPCI_IRQ HW_EVENT_EXTERNAL
-
-extern struct pci_ops gapspci_pci_ops;
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
deleted file mode 100644
index ed69ce7f203012..00000000000000
--- a/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/dreamcast/sysasic.h
- *
- * Definitions for the Dreamcast System ASIC and related peripherals.
- *
- * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- */
-#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
-#define __ASM_SH_DREAMCAST_SYSASIC_H
-
-#include <asm/irq.h>
-
-/* Hardware events -
-
- Each of these events correspond to a bit within the Event Mask Registers/
- Event Status Registers. Because of the virtual IRQ numbering scheme, a
- base offset must be used when calculating the virtual IRQ that each event
- takes.
-*/
-
-#define HW_EVENT_IRQ_BASE 48
-
-/* IRQ 13 */
-#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */
-#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
-#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
-#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
-#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
-
-/* IRQ 11 */
-#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
-#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
-#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
-
-#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
-
-/* arch/sh/boards/mach-dreamcast/irq.c */
-extern int systemasic_irq_demux(int);
-extern void systemasic_irq_init(void);
-
-#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
-
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
deleted file mode 100644
index 2d685cc2d54ced..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2009 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
-LIST "--------------------------------"
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-LIST "--------------------------------"
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "MMU"
-ED 0xff000010, 0x00000004
-
-LIST "setup clocks"
-ED 0xa4150024, 0x00004000
-ED 0xa4150000, 0x8E003508
-
-WAIT 1
-
-LIST "BSC"
-ED 0xff800020, 0xa5a50000
-ED 0xfec10000, 0x00001013
-ED 0xfec10004, 0x11110400
-ED 0xfec10024, 0x00000440
-
-WAIT 1
-
-LIST "setup sdram"
-ED 0xfd000108, 0x00000181
-ED 0xfd000020, 0x015B0002
-ED 0xfd000030, 0x03061502
-ED 0xfd000034, 0x02020102
-ED 0xfd000038, 0x01090305
-ED 0xfd00003c, 0x00000002
-ED 0xfd000008, 0x00000005
-ED 0xfd000018, 0x00000001
-
-WAIT 1
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000060, 0x00020000
-ED 0xfd000060, 0x00030000
-ED 0xfd000060, 0x00010040
-ED 0xfd000060, 0x00000532
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000014, 0x00000004
-ED 0xfd000060, 0x00000432
-ED 0xfd000060, 0x000103C0
-ED 0xfd000060, 0x00010040
-
-WAIT 1
-
-ED 0xfd000010, 0x00000001
-ED 0xfd000044, 0x00000613
-ED 0xfd000048, 0x238C003A
-ED 0xfd000014, 0x00000002
-
-LIST "Dummy read"
-DD 0x0c400000, 0x0c400000
-
-ED 0xfd000014, 0x00000002
-ED 0xfd000014, 0x00000004
-ED 0xfd000108, 0x00000080
-ED 0xfd000040, 0x00010000
-
-WAIT 1
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
-
-LIST "disable USB"
-EW 0xA4D80000, 0x0000
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
deleted file mode 100644
index 2da6ff326cbd0a..00000000000000
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* EcoVec board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1 : .long 0xa8000000
-2 :
-
-#else /* __ASSEMBLY__ */
-
-/* Ecovec board specific information:
- *
- * Set the following to enable MMCIF boot from the MMC card in CN12:
- *
- * DS1.5 = OFF (SH BOOT pin set to L)
- * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
- * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1)
- *
- */
-#define HIZCRA 0xa4050158
-#define PGDR 0xa405012c
-
-static inline void mmcif_update_progress(int nr)
-{
- /* disable Hi-Z for LED pins */
- __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
-
- /* update progress on LED4, LED5, LED6 and LED7 */
- __raw_writeb(1 << (nr - 1), PGDR);
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
deleted file mode 100644
index 0e97473afe0bb9..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_KFR2R09_H
-#define __ASM_SH_KFR2R09_H
-
-#include <video/sh_mobile_lcdc.h>
-
-#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-#else
-static int kfr2r09_lcd_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
- return -ENODEV;
-}
-static void kfr2r09_lcd_start(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
-{
-}
-#endif
-
-#endif /* __ASM_SH_KFR2R09_H */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
deleted file mode 100644
index a67b1926be222e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-LIST "SPDX-License-Identifier: GPL-2.0"
-LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
-LIST "set up enough of the kfr2r09 hardware to boot the kernel"
-
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "invalidate instruction cache"
-ED 0xff00001c, 0x00000800
-
-LIST "invalidate TLBs"
-ED 0xff000010, 0x00000004
-
-LIST "select mode for cs5 + cs6"
-ED 0xff800020, 0xa5a50001
-ED 0xfec10000, 0x0000001b
-
-LIST "setup clocks"
-LIST "The PLL and FLL values are updated here for the optimal"
-LIST "RF frequency and improved reception sensitivity."
-ED 0xa4150004, 0x00000050
-ED 0xa4150000, 0x91053508
-WAIT 1
-ED 0xa4150050, 0x00000340
-ED 0xa4150024, 0x00005000
-
-LIST "setup pins"
-EB 0xa4050120, 0x00
-EB 0xa4050122, 0x00
-EB 0xa4050124, 0x00
-EB 0xa4050126, 0x00
-EB 0xa4050128, 0xA0
-EB 0xa405012A, 0x10
-EB 0xa405012C, 0x00
-EB 0xa405012E, 0x00
-EB 0xa4050130, 0x00
-EB 0xa4050132, 0x00
-EB 0xa4050134, 0x01
-EB 0xa4050136, 0x40
-EB 0xa4050138, 0x00
-EB 0xa405013A, 0x00
-EB 0xa405013C, 0x00
-EB 0xa405013E, 0x20
-EB 0xa4050160, 0x00
-EB 0xa4050162, 0x40
-EB 0xa4050164, 0x03
-EB 0xa4050166, 0x00
-EB 0xa4050168, 0x00
-EB 0xa405016A, 0x00
-EB 0xa405016C, 0x00
-
-EW 0xa405014E, 0x5660
-EW 0xa4050150, 0x0145
-EW 0xa4050152, 0x1550
-EW 0xa4050154, 0x0200
-EW 0xa4050156, 0x0040
-
-EW 0xa4050158, 0x0000
-EW 0xa405015a, 0x0000
-EW 0xa405015c, 0x0000
-EW 0xa405015e, 0x0000
-
-EW 0xa4050180, 0x0000
-EW 0xa4050182, 0x8002
-EW 0xa4050184, 0x0000
-
-EW 0xa405018a, 0x9991
-EW 0xa405018c, 0x8011
-EW 0xa405018e, 0x9550
-
-EW 0xa4050100, 0x0000
-EW 0xa4050102, 0x5540
-EW 0xa4050104, 0x0000
-EW 0xa4050106, 0x0000
-EW 0xa4050108, 0x4550
-EW 0xa405010a, 0x0130
-EW 0xa405010c, 0x0555
-EW 0xa405010e, 0x0000
-EW 0xa4050110, 0x0000
-EW 0xa4050112, 0xAAA8
-EW 0xa4050114, 0x8305
-EW 0xa4050116, 0x10F0
-EW 0xa4050118, 0x0F50
-EW 0xa405011a, 0x0000
-EW 0xa405011c, 0x0000
-EW 0xa405011e, 0x0555
-EW 0xa4050140, 0x0000
-EW 0xa4050142, 0x5141
-EW 0xa4050144, 0x5005
-EW 0xa4050146, 0xAAA9
-EW 0xa4050148, 0xFAA9
-EW 0xa405014a, 0x3000
-EW 0xa405014c, 0x0000
-
-LIST "setup sdram"
-ED 0xFD000108, 0x40000301
-ED 0xFD000020, 0x011B0002
-ED 0xFD000030, 0x03060E02
-ED 0xFD000034, 0x01020102
-ED 0xFD000038, 0x01090406
-ED 0xFD000008, 0x00000004
-ED 0xFD000040, 0x00000001
-ED 0xFD000040, 0x00000000
-ED 0xFD000018, 0x00000001
-
-WAIT 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000060, 0x00000032
-ED 0xFD000060, 0x00020000
-ED 0xFD000014, 0x00000004
-ED 0xFD000014, 0x00000004
-ED 0xFD000010, 0x00000001
-ED 0xFD000044, 0x000004AF
-ED 0xFD000048, 0x20CF0037
-
-LIST "read 16 bytes from sdram"
-DD 0xa8000000, 0xa8000000, 1
-DD 0xa8000004, 0xa8000004, 1
-DD 0xa8000008, 0xa8000008, 1
-DD 0xa800000c, 0xa800000c, 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000014, 0x00000004
-ED 0xFD000108, 0x40000300
-ED 0xFD000040, 0x00010000
-
-LIST "write to internal ram"
-ED 0xfd8007fc, 0
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
deleted file mode 100644
index 209275872ff06e..00000000000000
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __ASSEMBLY__
-
-/* kfr2r09 board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-#include <asm/romimage-macros.h>
-#include <mach/partner-jet-setup.txt>
-
- /* execute icbi after enabling cache */
- mov.l 1f, r0
- icbi @r0
-
- /* jump to cached area */
- mova 2f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long 0xa8000000
-2:
-
-#else /* __ASSEMBLY__ */
-
-static inline void mmcif_update_progress(int nr)
-{
-}
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
deleted file mode 100644
index b954de617b4970..00000000000000
--- a/arch/sh/include/mach-landisk/mach/gio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_LANDISK_GIO_H
-#define __ASM_SH_LANDISK_GIO_H
-
-#include <linux/ioctl.h>
-
-/* version */
-#define VERSION_STR "1.00"
-
-/* Driver name */
-#define GIO_DRIVER_NAME "/dev/giodrv"
-
-/* Use 'k' as magic number */
-#define GIODRV_IOC_MAGIC 'k'
-
-#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0)
-/*
- * S means "Set" through a ptr,
- * T means "Tell" directly
- * G means "Get" (to a pointed var)
- * Q means "Query", response is on the return value
- * X means "eXchange": G and S atomically
- * H means "sHift": T and Q atomically
- */
-#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *)
-#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *)
-#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *)
-#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *)
-#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *)
-#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *)
-#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *)
-#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
-#define GIODRV_IOC_MAXNR 8
-
-#define GIO_READ 0x00000000
-#define GIO_WRITE 0x00000001
-
-#endif /* __ASM_SH_LANDISK_GIO_H */
diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
deleted file mode 100644
index b41308c94d1e94..00000000000000
--- a/arch/sh/include/mach-landisk/mach/iodata_landisk.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_IODATA_LANDISK_H
-#define __ASM_SH_IODATA_LANDISK_H
-
-/*
- * arch/sh/include/mach-landisk/mach/iodata_landisk.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * IO-DATA LANDISK support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_USB 0xa4000000 /* USB Controller M66590 */
-
-#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */
-#define PA_LED 0xb0000001 /* LED Control Register */
-#define PA_STATUS 0xb0000002 /* Switch Status Register */
-#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */
-#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */
-#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */
-/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */
-#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */
-
-#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */
-#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */
-
-#define IRQ_PCIINTA evt2irq(0x2a0) /* PCI INTA IRQ */
-#define IRQ_PCIINTB evt2irq(0x2c0) /* PCI INTB IRQ */
-#define IRQ_PCIINTC evt2irq(0x2e0) /* PCI INTC IRQ */
-#define IRQ_PCIINTD evt2irq(0x300) /* PCI INTD IRQ */
-#define IRQ_ATA evt2irq(0x320) /* ATA IRQ */
-#define IRQ_FATA evt2irq(0x340) /* FATA IRQ */
-#define IRQ_POWER evt2irq(0x360) /* Power Switch IRQ */
-#define IRQ_BUTTON evt2irq(0x380) /* USL-5P Button IRQ */
-#define IRQ_FAULT evt2irq(0x3a0) /* USL-5P Fault IRQ */
-
-void init_landisk_IRQ(void);
-
-#define __IO_PREFIX landisk
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_IODATA_LANDISK_H */
-
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
deleted file mode 100644
index 2a422b778e008f..00000000000000
--- a/arch/sh/include/mach-migor/mach/migor.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-#define PORT_MSELCRA 0xa4050180
-#define PORT_MSELCRB 0xa4050182
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
deleted file mode 100644
index 76c2e84893cc61..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_FPGA_H
-#define __MACH_SDK7786_FPGA_H
-
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-#define SRSTR 0x000
-#define SRSTR_MAGIC 0x1971 /* Fixed magical read value */
-
-#define INTASR 0x010
-#define INTAMR 0x020
-#define MODSWR 0x030
-#define INTTESTR 0x040
-#define SYSSR 0x050
-#define NRGPR 0x060
-
-#define NMISR 0x070
-#define NMISR_MAN_NMI BIT(0)
-#define NMISR_AUX_NMI BIT(1)
-#define NMISR_MASK (NMISR_MAN_NMI | NMISR_AUX_NMI)
-
-#define NMIMR 0x080
-#define NMIMR_MAN_NMIM BIT(0) /* Manual NMI mask */
-#define NMIMR_AUX_NMIM BIT(1) /* Auxiliary NMI mask */
-#define NMIMR_MASK (NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
-
-#define INTBSR 0x090
-#define INTBMR 0x0a0
-#define USRLEDR 0x0b0
-#define MAPSWR 0x0c0
-#define FPGAVR 0x0d0
-#define FPGADR 0x0e0
-#define PCBRR 0x0f0
-#define RSR 0x100
-#define EXTASR 0x110
-#define SPCAR 0x120
-#define INTMSR 0x130
-
-#define PCIECR 0x140
-#define PCIECR_PCIEMUX1 BIT(15)
-#define PCIECR_PCIEMUX0 BIT(14)
-#define PCIECR_PRST4 BIT(12) /* slot 4 card present */
-#define PCIECR_PRST3 BIT(11) /* slot 3 card present */
-#define PCIECR_PRST2 BIT(10) /* slot 2 card present */
-#define PCIECR_PRST1 BIT(9) /* slot 1 card present */
-#define PCIECR_CLKEN BIT(4) /* oscillator enable */
-
-#define FAER 0x150
-#define USRGPIR 0x160
-
-/* 0x170 reserved */
-
-#define LCLASR 0x180
-#define LCLASR_FRAMEN BIT(15)
-
-#define LCLASR_FPGA_SEL_SHIFT 12
-#define LCLASR_NAND_SEL_SHIFT 8
-#define LCLASR_NORB_SEL_SHIFT 4
-#define LCLASR_NORA_SEL_SHIFT 0
-
-#define LCLASR_AREA_MASK 0x7
-
-#define LCLASR_FPGA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_FPGA_SEL_SHIFT)
-#define LCLASR_NAND_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NAND_SEL_SHIFT)
-#define LCLASR_NORB_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORB_SEL_SHIFT)
-#define LCLASR_NORA_SEL_MASK (LCLASR_AREA_MASK << LCLASR_NORA_SEL_SHIFT)
-
-#define SBCR 0x190
-#define SCBR_I2CMEN BIT(0) /* FPGA I2C master enable */
-#define SCBR_I2CCEN BIT(1) /* CPU I2C master enable */
-
-#define PWRCR 0x1a0
-#define PWRCR_SCISEL0 BIT(0)
-#define PWRCR_SCISEL1 BIT(1)
-#define PWRCR_SCIEN BIT(2) /* Serial port enable */
-#define PWRCR_PDWNACK BIT(5) /* Power down acknowledge */
-#define PWRCR_PDWNREQ BIT(7) /* Power down request */
-#define PWRCR_INT2 BIT(11) /* INT2 connection to power manager */
-#define PWRCR_BUPINIT BIT(13) /* DDR backup initialize */
-#define PWRCR_BKPRST BIT(15) /* Backup power reset */
-
-#define SPCBR 0x1b0
-#define SPICR 0x1c0
-#define SPIDR 0x1d0
-#define I2CCR 0x1e0
-#define I2CDR 0x1f0
-#define FPGACR 0x200
-#define IASELR1 0x210
-#define IASELR2 0x220
-#define IASELR3 0x230
-#define IASELR4 0x240
-#define IASELR5 0x250
-#define IASELR6 0x260
-#define IASELR7 0x270
-#define IASELR8 0x280
-#define IASELR9 0x290
-#define IASELR10 0x2a0
-#define IASELR11 0x2b0
-#define IASELR12 0x2c0
-#define IASELR13 0x2d0
-#define IASELR14 0x2e0
-#define IASELR15 0x2f0
-/* 0x300 reserved */
-#define IBSELR1 0x310
-#define IBSELR2 0x320
-#define IBSELR3 0x330
-#define IBSELR4 0x340
-#define IBSELR5 0x350
-#define IBSELR6 0x360
-#define IBSELR7 0x370
-#define IBSELR8 0x380
-#define IBSELR9 0x390
-#define IBSELR10 0x3a0
-#define IBSELR11 0x3b0
-#define IBSELR12 0x3c0
-#define IBSELR13 0x3d0
-#define IBSELR14 0x3e0
-#define IBSELR15 0x3f0
-#define USRACR 0x400
-#define BEEPR 0x410
-#define USRLCDR 0x420
-#define SMBCR 0x430
-#define SMBDR 0x440
-#define USBCR 0x450
-#define AMSR 0x460
-#define ACCR 0x470
-#define SDIFCR 0x480
-
-/* arch/sh/boards/mach-sdk7786/fpga.c */
-extern void __iomem *sdk7786_fpga_base;
-extern void sdk7786_fpga_init(void);
-
-/* arch/sh/boards/mach-sdk7786/nmi.c */
-extern void sdk7786_nmi_init(void);
-
-#define SDK7786_FPGA_REGADDR(reg) (sdk7786_fpga_base + (reg))
-
-/*
- * A convenience wrapper from register offset to internal I2C address,
- * when the FPGA is in I2C slave mode.
- */
-#define SDK7786_FPGA_I2CADDR(reg) ((reg) >> 3)
-
-static inline u16 fpga_read_reg(unsigned int reg)
-{
- return ioread16(sdk7786_fpga_base + reg);
-}
-
-static inline void fpga_write_reg(u16 val, unsigned int reg)
-{
- iowrite16(val, sdk7786_fpga_base + reg);
-}
-
-#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/irq.h b/arch/sh/include/mach-sdk7786/mach/irq.h
deleted file mode 100644
index 3343380907b2db..00000000000000
--- a/arch/sh/include/mach-sdk7786/mach/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SDK7786_IRQ_H
-#define __MACH_SDK7786_IRQ_H
-
-/* arch/sh/boards/mach-sdk7786/irq.c */
-extern void sdk7786_init_irq(void);
-
-#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/arch/sh/include/mach-se/mach/mrshpc.h b/arch/sh/include/mach-se/mach/mrshpc.h
deleted file mode 100644
index 4e260f399b79c3..00000000000000
--- a/arch/sh/include/mach-se/mach/mrshpc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_SE_MRSHPC_H
-#define __MACH_SE_MRSHPC_H
-
-#include <linux/io.h>
-
-static inline void __init mrshpc_setup_windows(void)
-{
- if ((__raw_readw(MRSHPC_CSR) & 0x000c) != 0)
- return; /* Not detected */
-
- if ((__raw_readw(MRSHPC_CSR) & 0x0080) == 0) {
- __raw_writew(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
- } else {
- __raw_writew(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
- }
-
- /*
- * PC-Card window open
- * flag == COMMON/ATTRIBUTE/IO
- */
- /* common window open */
- __raw_writew(0x8a84, MRSHPC_MW0CR1);
- if((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* common mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0b00, MRSHPC_MW0CR2);
- else
- /* common mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0300, MRSHPC_MW0CR2);
-
- /* attribute window open */
- __raw_writew(0x8a85, MRSHPC_MW1CR1);
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- /* attribute mode & bus width 16bit SWAP = 1*/
- __raw_writew(0x0a00, MRSHPC_MW1CR2);
- else
- /* attribute mode & bus width 16bit SWAP = 0*/
- __raw_writew(0x0200, MRSHPC_MW1CR2);
-
- /* I/O window open */
- __raw_writew(0x8a86, MRSHPC_IOWCR1);
- __raw_writew(0x0008, MRSHPC_CDCR); /* I/O card mode */
- if ((__raw_readw(MRSHPC_CSR) & 0x4000) != 0)
- __raw_writew(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
- else
- __raw_writew(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
-
- __raw_writew(0x2000, MRSHPC_ICR);
- __raw_writeb(0x00, PA_MRSHPC_MW2 + 0x206);
- __raw_writeb(0x42, PA_MRSHPC_MW2 + 0x200);
-}
-
-#endif /* __MACH_SE_MRSHPC_H */
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
deleted file mode 100644
index aa83fe1ff0b124..00000000000000
--- a/arch/sh/include/mach-se/mach/se.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE_H
-#define __ASM_SH_HITACHI_SE_H
-
-/*
- * linux/include/asm-sh/hitachi_se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_83902 0xb0000000 /* DP83902A */
-#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */
-#define PA_83902_RST 0xb0080000 /* DP83902A reset port */
-
-#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */
-#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */
-#define PA_LED 0xb0c00000 /* LED */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define PA_BCR 0xb0e00000
-#else
-#define PA_BCR 0xb1400000 /* FPGA */
-#endif
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define INTC_IRR0 0xa4000004UL
-#define INTC_IRR1 0xa4000006UL
-#define INTC_IRR2 0xa4000008UL
-
-#define INTC_ICR0 0xfffffee0UL
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR2 0xa4000012UL
-#define INTC_INTER 0xa4000014UL
-
-#define INTC_IPRC 0xa4000016UL
-#define INTC_IPRD 0xa4000018UL
-#define INTC_IPRE 0xa400001aUL
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC evt2irq(0x380)
-#define IRQ_CFCARD evt2irq(0x3c0)
-#else
-#define IRQ_STNIC evt2irq(0x340)
-#define IRQ_CFCARD evt2irq(0x2e0)
-#endif
-
-/* SH Ether support (SH7710/SH7712) */
-/* Base address */
-#define SH_ETH0_BASE 0xA7000000
-#define SH_ETH1_BASE 0xA7000400
-#define SH_TSU_BASE 0xA7000800
-/* PHY ID */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-# define PHY_ID 0x00
-#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
-# define PHY_ID 0x01
-#endif
-/* Ether IRQ */
-#define SH_ETH0_IRQ evt2irq(0xc00)
-#define SH_ETH1_IRQ evt2irq(0xc20)
-#define SH_TSU_IRQ evt2irq(0xc40)
-
-void init_se_IRQ(void);
-
-#define __IO_PREFIX se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
deleted file mode 100644
index cf190279bb1d7e..00000000000000
--- a/arch/sh/include/mach-se/mach/se7206.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7206_H
-#define __ASM_SH_SE7206_H
-
-#define PA_SMSC 0x30000000
-#define PA_MRSHPC 0x34000000
-#define PA_LED 0x31400000
-
-void init_se7206_IRQ(void);
-
-#define __IO_PREFIX se7206
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7206_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
deleted file mode 100644
index 107fb5f3ef8056..00000000000000
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-/* Area 0 */
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM 0x00400000 /* Flash ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
-#define PA_SRAM 0x00800000 /* SRAM */
-#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-/* Area 2 */
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-/* Area 3 */
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-/* Area 4 */
-#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED 0xb0C00000 /* LED */
-#define LED_SHIFT 0
-#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-/* Area 5 */
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-/* Area 6 */
-#define PA_LCD1 0xb8000000
-#define PA_LCD2 0xb8800000
-
-#define PORT_PACR 0xA4050100
-#define PORT_PBCR 0xA4050102
-#define PORT_PCCR 0xA4050104
-#define PORT_PDCR 0xA4050106
-#define PORT_PECR 0xA4050108
-#define PORT_PFCR 0xA405010A
-#define PORT_PGCR 0xA405010C
-#define PORT_PHCR 0xA405010E
-#define PORT_PJCR 0xA4050110
-#define PORT_PKCR 0xA4050112
-#define PORT_PLCR 0xA4050114
-#define PORT_PMCR 0xA4050116
-#define PORT_PNCR 0xA4050118
-#define PORT_PQCR 0xA405011A
-#define PORT_PRCR 0xA405011C
-#define PORT_PSCR 0xA405011E
-#define PORT_PTCR 0xA4050140
-#define PORT_PUCR 0xA4050142
-#define PORT_PVCR 0xA4050144
-#define PORT_PWCR 0xA4050146
-#define PORT_PYCR 0xA4050148
-#define PORT_PZCR 0xA405014A
-
-#define PORT_PSELA 0xA405014C
-#define PORT_PSELB 0xA405014E
-#define PORT_PSELC 0xA4050150
-#define PORT_PSELD 0xA4050152
-#define PORT_PSELE 0xA4050154
-
-#define PORT_HIZCRA 0xA4050156
-#define PORT_HIZCRB 0xA4050158
-#define PORT_HIZCRC 0xA405015C
-
-#define PORT_DRVCR 0xA4050180
-
-#define PORT_PADR 0xA4050120
-#define PORT_PBDR 0xA4050122
-#define PORT_PCDR 0xA4050124
-#define PORT_PDDR 0xA4050126
-#define PORT_PEDR 0xA4050128
-#define PORT_PFDR 0xA405012A
-#define PORT_PGDR 0xA405012C
-#define PORT_PHDR 0xA405012E
-#define PORT_PJDR 0xA4050130
-#define PORT_PKDR 0xA4050132
-#define PORT_PLDR 0xA4050134
-#define PORT_PMDR 0xA4050136
-#define PORT_PNDR 0xA4050138
-#define PORT_PQDR 0xA405013A
-#define PORT_PRDR 0xA405013C
-#define PORT_PTDR 0xA4050160
-#define PORT_PUDR 0xA4050162
-#define PORT_PVDR 0xA4050164
-#define PORT_PWDR 0xA4050166
-#define PORT_PYDR 0xA4050168
-
-#define FPGA_IN 0xb1400000
-#define FPGA_OUT 0xb1400002
-
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ4_IRQ evt2irq(0x680)
-#define IRQ5_IRQ evt2irq(0x6a0)
-
-#define SE7343_FPGA_IRQ_MRSHPC0 0
-#define SE7343_FPGA_IRQ_MRSHPC1 1
-#define SE7343_FPGA_IRQ_MRSHPC2 2
-#define SE7343_FPGA_IRQ_MRSHPC3 3
-#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */
-#define SE7343_FPGA_IRQ_USB 8
-#define SE7343_FPGA_IRQ_UARTA 10
-#define SE7343_FPGA_IRQ_UARTB 11
-
-#define SE7343_FPGA_IRQ_NR 12
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7343/irq.c */
-extern struct irq_domain *se7343_irq_domain;
-
-void init_7343se_IRQ(void);
-
-#endif /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
deleted file mode 100644
index 82226d40faf528..00000000000000
--- a/arch/sh/include/mach-se/mach/se7721.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- */
-
-#ifndef __ASM_SH_SE7721_H
-#define __ASM_SH_SE7721_H
-
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 2 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB8000000
-
-#define PA_PCIC PA_PERIPHERAL
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0)
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000)
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000)
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED 0xB6800000 /* 8bit LED */
-#define PA_FPGA 0xB7000000 /* FPGA base address */
-
-#define MRSHPC_IRQ0 evt2irq(0x340)
-
-#define FPGA_ILSR1 (PA_FPGA + 0x02)
-#define FPGA_ILSR2 (PA_FPGA + 0x03)
-#define FPGA_ILSR3 (PA_FPGA + 0x04)
-#define FPGA_ILSR4 (PA_FPGA + 0x05)
-#define FPGA_ILSR5 (PA_FPGA + 0x06)
-#define FPGA_ILSR6 (PA_FPGA + 0x07)
-#define FPGA_ILSR7 (PA_FPGA + 0x08)
-#define FPGA_ILSR8 (PA_FPGA + 0x09)
-
-void init_se7721_IRQ(void);
-
-#define __IO_PREFIX se7721
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7721_H */
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
deleted file mode 100644
index efb761f9f6e0e8..00000000000000
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7722_H
-#define __ASM_SH_SE7722_H
-
-/*
- * linux/include/asm-sh/se7722.h
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-
-#define PA_PERIPHERAL 0xB0000000
-
-#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
-#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
-
-#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
-/* GPIO */
-#define FPGA_IN 0xb1840000UL
-#define FPGA_OUT 0xb1840004UL
-
-#define PORT_PECR 0xA4050108UL
-#define PORT_PJCR 0xA4050110UL
-#define PORT_PSELD 0xA4050154UL
-#define PORT_PSELB 0xA4050150UL
-
-#define PORT_PSELC 0xA4050152UL
-#define PORT_PKCR 0xA4050112UL
-#define PORT_PHCR 0xA405010EUL
-#define PORT_PLCR 0xA4050114UL
-#define PORT_PMCR 0xA4050116UL
-#define PORT_PRCR 0xA405011CUL
-#define PORT_PXCR 0xA4050148UL
-#define PORT_PSELA 0xA405014EUL
-#define PORT_PYCR 0xA405014AUL
-#define PORT_PZCR 0xA405014CUL
-#define PORT_HIZCRA 0xA4050158UL
-#define PORT_HIZCRC 0xA405015CUL
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-
-#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */
-#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */
-#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
-#define SE7722_FPGA_IRQ_NR 6
-
-struct irq_domain;
-
-/* arch/sh/boards/se/7722/irq.c */
-extern struct irq_domain *se7722_irq_domain;
-
-void init_se7722_IRQ(void);
-
-#define __IO_PREFIX se7722
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7722_H */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
deleted file mode 100644
index 1fe28820dfa953..00000000000000
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7724_H
-#define __ASM_SH_SE7724_H
-
-/*
- * linux/include/asm-sh/se7724.h
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Hitachi UL SolutionEngine 7724 Support.
- *
- * Based on se7722.h
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* SH Eth */
-#define SH_ETH_ADDR (0xA4600000)
-#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
-#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
-
-#define PA_LED (0xba203000) /* 8bit LED */
-#define IRQ_MODE (0xba200010)
-#define IRQ0_SR (0xba200014)
-#define IRQ1_SR (0xba200018)
-#define IRQ2_SR (0xba20001c)
-#define IRQ0_MR (0xba200020)
-#define IRQ1_MR (0xba200024)
-#define IRQ2_MR (0xba200028)
-
-/* IRQ */
-#define IRQ0_IRQ evt2irq(0x600)
-#define IRQ1_IRQ evt2irq(0x620)
-#define IRQ2_IRQ evt2irq(0x640)
-
-/* Bits in IRQ012 registers */
-#define SE7724_FPGA_IRQ_BASE 220
-
-/* IRQ0 */
-#define IRQ0_BASE SE7724_FPGA_IRQ_BASE
-#define IRQ0_KEY (IRQ0_BASE + 12)
-#define IRQ0_RMII (IRQ0_BASE + 13)
-#define IRQ0_SMC (IRQ0_BASE + 14)
-#define IRQ0_MASK 0x7fff
-#define IRQ0_END IRQ0_SMC
-/* IRQ1 */
-#define IRQ1_BASE (IRQ0_END + 1)
-#define IRQ1_TS (IRQ1_BASE + 0)
-#define IRQ1_MASK 0x0001
-#define IRQ1_END IRQ1_TS
-/* IRQ2 */
-#define IRQ2_BASE (IRQ1_END + 1)
-#define IRQ2_USB0 (IRQ1_BASE + 0)
-#define IRQ2_USB1 (IRQ1_BASE + 1)
-#define IRQ2_MASK 0x0003
-#define IRQ2_END IRQ2_USB1
-
-#define SE7724_FPGA_IRQ_NR (IRQ2_END - IRQ0_BASE)
-
-/* arch/sh/boards/se/7724/irq.c */
-void init_se7724_IRQ(void);
-
-#define __IO_PREFIX se7724
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7724_H */
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
deleted file mode 100644
index ee5b5e6e597970..00000000000000
--- a/arch/sh/include/mach-se/mach/se7751.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_HITACHI_7751SE_H
-#define __ASM_SH_HITACHI_7751SE_H
-
-/*
- * linux/include/asm-sh/hitachi_7751se.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
-
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/sh_intc.h>
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 evt2irq(0x3a0)
-
-void init_7751se_IRQ(void);
-
-#define __IO_PREFIX sh7751se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
deleted file mode 100644
index 24f0ac82f8b330..00000000000000
--- a/arch/sh/include/mach-se/mach/se7780.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SE7780_H
-#define __ASM_SH_SE7780_H
-
-/*
- * linux/include/asm-sh/se7780.h
- *
- * Copyright (C) 2006,2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- */
-#include <linux/sh_intc.h>
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa1000000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */
-#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */
-
-#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */
-
-#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */
-#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */
-#define DISP_CHAR_RAM (7 << 3)
-#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0)
-#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1)
-#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2)
-#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3)
-#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4)
-#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5)
-#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6)
-#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7)
-
-#define DISP_UDC_RAM (5 << 3)
-#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */
-
-/* FPGA register address and bit */
-#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */
-#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */
-#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */
-#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */
-#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */
-#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */
-#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */
-#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */
-#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */
-#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */
-#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */
-#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */
-#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */
-#define PA_LED FPGA_DBG_LED
-#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */
-#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */
-#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */
-
-/* FPGA INTSEL position */
-/* INTSEL1 */
-#define IRQPOS_SMC91CX (0 * 4)
-#define IRQPOS_SM501 (1 * 4)
-/* INTSEL2 */
-#define IRQPOS_EXTINT1 (0 * 4)
-#define IRQPOS_EXTINT2 (1 * 4)
-#define IRQPOS_EXTINT3 (2 * 4)
-#define IRQPOS_EXTINT4 (3 * 4)
-/* INTSEL3 */
-#define IRQPOS_PCCPW (0 * 4)
-
-/* IDE interrupt */
-#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */
-
-/* SMC interrupt */
-#define SMC_IRQ evt2irq(0x300)
-
-/* SM501 interrupt */
-#define SM501_IRQ evt2irq(0x200)
-
-/* interrupt pin */
-#define IRQPIN_EXTINT1 0 /* IRQ0 pin */
-#define IRQPIN_EXTINT2 1 /* IRQ1 pin */
-#define IRQPIN_EXTINT3 2 /* IRQ2 pin */
-#define IRQPIN_SMC91CX 3 /* IRQ3 pin */
-#define IRQPIN_EXTINT4 4 /* IRQ4 pin */
-#define IRQPIN_PCC0 5 /* IRQ5 pin */
-#define IRQPIN_PCC2 6 /* IRQ6 pin */
-#define IRQPIN_SM501 7 /* IRQ7 pin */
-#define IRQPIN_PCCPW 7 /* IRQ7 pin */
-
-/* arch/sh/boards/se/7780/irq.c */
-void init_se7780_IRQ(void);
-
-#define __IO_PREFIX se7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7780_H */
diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h
deleted file mode 100644
index 5eacdabd71b6cb..00000000000000
--- a/arch/sh/include/mach-sh03/mach/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-sh/sh03/io.h
- *
- * Copyright 2004 Interface Co.,Ltd. Saito.K
- *
- * IO functions for an Interface CTP/PCI-SH03
- */
-
-#ifndef _ASM_SH_IO_SH03_H
-#define _ASM_SH_IO_SH03_H
-
-#include <linux/time.h>
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-
-void heartbeat_sh03(void);
-
-#endif /* _ASM_SH_IO_SH03_H */
diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
deleted file mode 100644
index 4ced684b16a4d4..00000000000000
--- a/arch/sh/include/mach-sh03/mach/sh03.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SH03_H
-#define __ASM_SH_SH03_H
-
-/*
- * linux/include/asm-sh/sh03/sh03.h
- *
- * Copyright (C) 2004 Interface Co., Ltd. Saito.K
- *
- * Interface CTP/PCI-SH03 support
- */
-
-#define PA_PCI_IO (0xbe240000) /* PCI I/O space */
-#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */
-
-#define PCIPAR (0xa4000cf8) /* PCI Config address */
-#define PCIPDR (0xa4000cfc) /* PCI Config data */
-
-#endif /* __ASM_SH_SH03_H */
diff --git a/arch/sh/include/mach-x3proto/mach/hardware.h b/arch/sh/include/mach-x3proto/mach/hardware.h
deleted file mode 100644
index 57ea4a5cca359d..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/hardware.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_X3PROTO_HARDWARE_H
-#define __MACH_X3PROTO_HARDWARE_H
-
-struct gpio_chip;
-
-/* arch/sh/boards/mach-x3proto/gpio.c */
-int x3proto_gpio_setup(void);
-extern struct gpio_chip x3proto_gpio_chip;
-
-#define NR_BASEBOARD_GPIOS 16
-
-#endif /* __MACH_X3PROTO_HARDWARE_H */
diff --git a/arch/sh/include/mach-x3proto/mach/ilsel.h b/arch/sh/include/mach-x3proto/mach/ilsel.h
deleted file mode 100644
index 47aeb4b55ea17b..00000000000000
--- a/arch/sh/include/mach-x3proto/mach/ilsel.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_ILSEL_H
-#define __ASM_SH_ILSEL_H
-
-typedef enum {
- ILSEL_NONE,
- ILSEL_LAN,
- ILSEL_USBH_I,
- ILSEL_USBH_S,
- ILSEL_USBH_V,
- ILSEL_RTC,
- ILSEL_USBP_I,
- ILSEL_USBP_S,
- ILSEL_USBP_V,
- ILSEL_KEY,
-
- /*
- * ILSEL Aliases - corner cases for interleaved level tables.
- *
- * Someone thought this was a good idea and less hassle than
- * demuxing a shared vector, really.
- */
-
- /* ILSEL0 and 2 */
- ILSEL_FPGA0,
- ILSEL_FPGA1,
- ILSEL_EX1,
- ILSEL_EX2,
- ILSEL_EX3,
- ILSEL_EX4,
-
- /* ILSEL1 and 3 */
- ILSEL_FPGA2 = ILSEL_FPGA0,
- ILSEL_FPGA3 = ILSEL_FPGA1,
- ILSEL_EX5 = ILSEL_EX1,
- ILSEL_EX6 = ILSEL_EX2,
- ILSEL_EX7 = ILSEL_EX3,
- ILSEL_EX8 = ILSEL_EX4,
-} ilsel_source_t;
-
-/* arch/sh/boards/renesas/x3proto/ilsel.c */
-int ilsel_enable(ilsel_source_t set);
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
-void ilsel_disable(unsigned int irq);
-
-#endif /* __ASM_SH_ILSEL_H */
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
deleted file mode 100644
index b8812c74c1dee1..00000000000000
--- a/arch/sh/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-generated-y += unistd_32.h
-generic-y += ucontext.h
diff --git a/arch/sh/include/uapi/asm/auxvec.h b/arch/sh/include/uapi/asm/auxvec.h
deleted file mode 100644
index 8eb47ede7193c1..00000000000000
--- a/arch/sh/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW 18 /* Used FPU control word. */
-
-#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR 33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the
- * value is -1, then the cache doesn't exist. Otherwise:
- *
- * bit 0-3: Cache set-associativity; 0 means fully associative.
- * bit 4-7: Log2 of cacheline size.
- * bit 8-31: Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE 34
-#define AT_L1D_CACHESHAPE 35
-#define AT_L2_CACHESHAPE 36
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/arch/sh/include/uapi/asm/byteorder.h b/arch/sh/include/uapi/asm/byteorder.h
deleted file mode 100644
index e27d6da3212ca1..00000000000000
--- a/arch/sh/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_BYTEORDER_H
-#define __ASM_SH_BYTEORDER_H
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
-
-#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/arch/sh/include/uapi/asm/cachectl.h b/arch/sh/include/uapi/asm/cachectl.h
deleted file mode 100644
index 79c5663251a528..00000000000000
--- a/arch/sh/include/uapi/asm/cachectl.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _SH_CACHECTL_H
-#define _SH_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */
-#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */
-#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */
-
-#define CACHEFLUSH_I 0x4
-
-/*
- * Options for cacheflush system call
- */
-#define ICACHE CACHEFLUSH_I /* flush instruction cache */
-#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */
-#define BCACHE (ICACHE|DCACHE) /* flush both caches */
-
-#endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/include/uapi/asm/cpu-features.h b/arch/sh/include/uapi/asm/cpu-features.h
deleted file mode 100644
index 6de5f65194e634..00000000000000
--- a/arch/sh/include/uapi/asm/cpu-features.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_CPU_FEATURES_H
-#define __ASM_SH_CPU_FEATURES_H
-
-/*
- * Processor flags
- *
- * Note: When adding a new flag, keep cpu_flags[] in
- * arch/sh/kernel/setup.c in sync so symbolic name
- * mapping of the processor flags has a chance of being
- * reasonably accurate.
- *
- * These flags are also available through the ELF
- * auxiliary vector as AT_HWCAP.
- */
-#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */
-#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */
-#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
-#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
-#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
-#define CPU_HAS_PTEA 0x0020 /* PTEA register */
-#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */
-#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */
-#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */
-#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */
-#define CPU_HAS_CAS_L 0x0400 /* cas.l atomic compare-and-swap */
-
-#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h
deleted file mode 100644
index 043dd4b9202630..00000000000000
--- a/arch/sh/include/uapi/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * There isn't anything here anymore, but the file must not be empty or patch
- * will delete it.
- */
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
deleted file mode 100644
index 11866d4f60e167..00000000000000
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_IOCTLS_H
-#define __ASM_SH_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX _IO('f', 1)
-#define FIONCLEX _IO('f', 2)
-#define FIOASYNC _IOW('f', 125, int)
-#define FIONBIO _IOW('f', 126, int)
-#define FIONREAD _IOR('f', 127, int)
-#define TIOCINQ FIONREAD
-#define FIOQSIZE _IOR('f', 128, loff_t)
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-
-#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
-#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
-#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
-#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
-
-#define TCSBRK _IO('t', 29)
-#define TCXONC _IO('t', 30)
-#define TCFLSH _IO('t', 31)
-
-#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
-#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
-#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
-#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
-#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
-
-#define TIOCSPGRP _IOW('t', 118, int)
-#define TIOCGPGRP _IOR('t', 119, int)
-
-#define TIOCEXCL _IO('T', 12) /* 0x540C */
-#define TIOCNXCL _IO('T', 13) /* 0x540D */
-#define TIOCSCTTY _IO('T', 14) /* 0x540E */
-
-#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */
-#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */
-#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */
-#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */
-#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */
-# define TIOCM_LE 0x001
-# define TIOCM_DTR 0x002
-# define TIOCM_RTS 0x004
-# define TIOCM_ST 0x008
-# define TIOCM_SR 0x010
-# define TIOCM_CTS 0x020
-# define TIOCM_CAR 0x040
-# define TIOCM_RNG 0x080
-# define TIOCM_DSR 0x100
-# define TIOCM_CD TIOCM_CAR
-# define TIOCM_RI TIOCM_RNG
-
-#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */
-#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */
-#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */
-#define TIOCCONS _IO('T', 29) /* 0x541D */
-#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */
-#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */
-#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */
-# define TIOCPKT_DATA 0
-# define TIOCPKT_FLUSHREAD 1
-# define TIOCPKT_FLUSHWRITE 2
-# define TIOCPKT_STOP 4
-# define TIOCPKT_START 8
-# define TIOCPKT_NOSTOP 16
-# define TIOCPKT_DOSTOP 32
-# define TIOCPKT_IOCTL 64
-
-
-#define TIOCNOTTY _IO('T', 34) /* 0x5422 */
-#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */
-#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */
-#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */
-#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */
-#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 42, struct termios2)
-#define TCSETS2 _IOW('T', 43, struct termios2)
-#define TCSETSW2 _IOW('T', 44, struct termios2)
-#define TCSETSF2 _IOW('T', 45, struct termios2)
-#define TIOCGRS485 _IOR('T', 46, struct serial_rs485)
-#define TIOCSRS485 _IOWR('T', 47, struct serial_rs485)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-#define TIOCVHANGUP _IO('T', 0x37)
-#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
-#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
-#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
-#define TIOCGISO7816 _IOR('T', 0x42, struct serial_iso7816)
-#define TIOCSISO7816 _IOWR('T', 0x43, struct serial_iso7816)
-
-#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
-#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
-#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
-#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
- /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
-#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
-
-#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#endif /* __ASM_SH_IOCTLS_H */
diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h
deleted file mode 100644
index adc998a64c769f..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/posix_types_32.h>
diff --git a/arch/sh/include/uapi/asm/posix_types_32.h b/arch/sh/include/uapi/asm/posix_types_32.h
deleted file mode 100644
index ea0f51d1ac554b..00000000000000
--- a/arch/sh/include/uapi/asm/posix_types_32.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_POSIX_TYPES_32_H
-#define __ASM_SH_POSIX_TYPES_32_H
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-typedef unsigned short __kernel_uid_t;
-#define __kernel_uid_t __kernel_uid_t
-typedef unsigned short __kernel_gid_t;
-#define __kernel_gid_t __kernel_gid_t
-
-typedef unsigned short __kernel_old_uid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_gid_t __kernel_old_gid_t
-typedef unsigned short __kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* __ASM_SH_POSIX_TYPES_32_H */
diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h
deleted file mode 100644
index 5c88e46b77731a..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 1999, 2000 Niibe Yutaka
- */
-#ifndef _UAPI__ASM_SH_PTRACE_H
-#define _UAPI__ASM_SH_PTRACE_H
-
-
-#define PTRACE_GETREGS 12 /* General registers */
-#define PTRACE_SETREGS 13
-
-#define PTRACE_GETFPREGS 14 /* FPU registers */
-#define PTRACE_SETFPREGS 15
-
-#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
-
-#define PTRACE_GETDSPREGS 55 /* DSP registers */
-#define PTRACE_SETDSPREGS 56
-
-#define PT_TEXT_END_ADDR 240
-#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
-#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
-#define PT_TEXT_LEN 252
-
-#include <asm/ptrace_32.h>
-
-#endif /* _UAPI__ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/uapi/asm/ptrace_32.h b/arch/sh/include/uapi/asm/ptrace_32.h
deleted file mode 100644
index dc8a26015018af..00000000000000
--- a/arch/sh/include/uapi/asm/ptrace_32.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_SH_PTRACE_32_H
-#define _UAPI__ASM_SH_PTRACE_32_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- * 0 - 15 are integer registers
- * 17 - 22 are control/special registers
- * 24 - 39 fp registers
- * 40 - 47 xd registers
- * 48 - fpscr register
- * -----------------------------
- *
- * We follows above, except:
- * 16 --- program counter (PC)
- * 22 --- syscall #
- * 23 --- floating point communication register
- */
-#define REG_REG0 0
-#define REG_REG15 15
-
-#define REG_PC 16
-
-#define REG_PR 17
-#define REG_SR 18
-#define REG_GBR 19
-#define REG_MACH 20
-#define REG_MACL 21
-
-#define REG_SYSCALL 22
-
-#define REG_FPREG0 23
-#define REG_FPREG15 38
-#define REG_XFREG0 39
-#define REG_XFREG15 54
-
-#define REG_FPSCR 55
-#define REG_FPUL 56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
- unsigned long regs[16];
- unsigned long pc;
- unsigned long pr;
- unsigned long sr;
- unsigned long gbr;
- unsigned long mach;
- unsigned long macl;
- long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
- unsigned long a1;
- unsigned long a0g;
- unsigned long a1g;
- unsigned long m0;
- unsigned long m1;
- unsigned long a0;
- unsigned long x0;
- unsigned long x1;
- unsigned long y0;
- unsigned long y1;
- unsigned long dsr;
- unsigned long rs;
- unsigned long re;
- unsigned long mod;
-};
-
-
-#endif /* _UAPI__ASM_SH_PTRACE_32_H */
diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h
deleted file mode 100644
index a9cc8bad0f36df..00000000000000
--- a/arch/sh/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGCONTEXT_H
-#define __ASM_SH_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-
- /* FPU registers */
- unsigned long sc_fpregs[16];
- unsigned long sc_xfpregs[16];
- unsigned int sc_fpscr;
- unsigned int sc_fpul;
- unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/uapi/asm/signal.h b/arch/sh/include/uapi/asm/signal.h
deleted file mode 100644
index 97299daddef5dc..00000000000000
--- a/arch/sh/include/uapi/asm/signal.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SIGNAL_H
-#define __ASM_SH_SIGNAL_H
-
-#define SA_RESTORER 0x04000000
-
-#include <asm-generic/signal.h>
-
-#ifndef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-#endif
-
-#endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h
deleted file mode 100644
index ef01ced9e16963..00000000000000
--- a/arch/sh/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SOCKIOS_H
-#define __ASM_SH_SOCKIOS_H
-
-#include <linux/time_types.h>
-
-/* Socket-level I/O control calls. */
-#define FIOGETOWN _IOR('f', 123, int)
-#define FIOSETOWN _IOW('f', 124, int)
-
-#define SIOCATMARK _IOR('s', 7, int)
-#define SIOCSPGRP _IOW('s', 8, pid_t)
-#define SIOCGPGRP _IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP_OLD _IOR('s', 100, struct __kernel_old_timeval) /* Get stamp (timeval) */
-#define SIOCGSTAMPNS_OLD _IOR('s', 101, struct __kernel_old_timespec) /* Get stamp (timespec) */
-
-#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h
deleted file mode 100644
index b0ca755ea08d99..00000000000000
--- a/arch/sh/include/uapi/asm/stat.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_STAT_H
-#define __ASM_SH_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned long st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[4];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#define STAT_HAVE_NSEC 1
-
-#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h
deleted file mode 100644
index c727d381a30aff..00000000000000
--- a/arch/sh/include/uapi/asm/swab.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_SWAB_H
-#define __ASM_SH_SWAB_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000, 2001 Paolo Alberelli
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm-generic/swab.h>
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
- __asm__(
- "swap.b %1, %0\n\t"
- "swap.w %0, %0\n\t"
- "swap.b %0, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab32 __arch_swab32
-
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
-{
- __asm__(
- "swap.b %1, %0"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-#define __arch_swab16 __arch_swab16
-
-static inline __u64 __arch_swab64(__u64 val)
-{
- union {
- struct { __u32 a,b; } s;
- __u64 u;
- } v, w;
- v.u = val;
- w.s.b = __arch_swab32(v.s.a);
- w.s.a = __arch_swab32(v.s.b);
- return w.u;
-}
-#define __arch_swab64 __arch_swab64
-
-#endif /* __ASM_SH_SWAB_H */
diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h
deleted file mode 100644
index 0f7c7772a2fbfc..00000000000000
--- a/arch/sh/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm/unistd_32.h>
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
deleted file mode 100644
index bbb90f92d05182..00000000000000
--- a/arch/sh/kernel/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.lds
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
deleted file mode 100644
index 69cd9ac4b2ab8a..00000000000000
--- a/arch/sh/kernel/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH kernel.
-#
-
-extra-y := vmlinux.lds
-
-ifdef CONFIG_FUNCTION_TRACER
-# Do not profile debug and lowlevel utilities
-CFLAGS_REMOVE_ftrace.o = -pg
-endif
-
-CFLAGS_REMOVE_return_address.o = -pg
-
-obj-y := head_32.o debugtraps.o dumpstack.o \
- idle.o io.o irq.o irq_32.o kdebugfs.o \
- machvec.o nmi_debug.o process.o \
- process_32.o ptrace.o ptrace_32.o \
- reboot.o return_address.o \
- setup.o signal_32.o sys_sh.o \
- syscalls_32.o time.o topology.o traps.o \
- traps_32.o unwinder.o
-
-ifndef CONFIG_GENERIC_IOMAP
-obj-y += iomap.o
-obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o
-endif
-
-obj-y += sys_sh32.o
-obj-y += cpu/
-obj-$(CONFIG_VSYSCALL) += vsyscall/
-obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
-obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
-obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
-obj-$(CONFIG_DUMP_CODE) += disassemble.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
-obj-$(CONFIG_DMA_NONCOHERENT) += dma-coherent.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
deleted file mode 100644
index a0322e8328456e..00000000000000
--- a/arch/sh/kernel/asm-offsets.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-
-#include <asm/thread_info.h>
-#include <asm/suspend.h>
-
-int main(void)
-{
- /* offsets into the thread_info struct */
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SIZE, sizeof(struct thread_info));
-
-#ifdef CONFIG_HIBERNATION
- DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
- DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
- DEFINE(PBE_NEXT, offsetof(struct pbe, next));
- DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
-#endif
-
- DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
- DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
- DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
- DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
- DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
- DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
- DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
- DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
- DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
- DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
- DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
- DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
- DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
- DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
- DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
- DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
- DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
- DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
- DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
- DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
- DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
- DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
- return 0;
-}
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
deleted file mode 100644
index 46118236bf0499..00000000000000
--- a/arch/sh/kernel/cpu/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific backends.
-#
-
-obj-$(CONFIG_CPU_SH2) = sh2/
-obj-$(CONFIG_CPU_SH2A) = sh2a/
-obj-$(CONFIG_CPU_SH3) = sh3/
-obj-$(CONFIG_CPU_SH4) = sh4/
-
-# Special cases for family ancestry.
-
-obj-$(CONFIG_CPU_SH4A) += sh4a/
-obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
-
-# Common interfaces.
-
-obj-$(CONFIG_SH_ADC) += adc.o
-obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c
deleted file mode 100644
index 509136715ed53c..00000000000000
--- a/arch/sh/kernel/cpu/adc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/adc.c -- SH3 on-chip ADC support
- *
- * Copyright (C) 2004 Andriy Skulysh <askulysh@image.kiev.ua>
- */
-
-#include <linux/module.h>
-#include <asm/adc.h>
-#include <asm/io.h>
-
-
-int adc_single(unsigned int channel)
-{
- int off;
- unsigned char csr;
-
- if (channel >= 8) return -1;
-
- off = (channel & 0x03) << 2;
-
- csr = __raw_readb(ADCSR);
- csr = channel | ADCSR_ADST | ADCSR_CKS;
- __raw_writeb(csr, ADCSR);
-
- do {
- csr = __raw_readb(ADCSR);
- } while ((csr & ADCSR_ADF) == 0);
-
- csr &= ~(ADCSR_ADF | ADCSR_ADST);
- __raw_writeb(csr, ADCSR);
-
- return (((__raw_readb(ADDRAH + off) << 8) |
- __raw_readb(ADDRAL + off)) >> 6);
-}
-
-EXPORT_SYMBOL(adc_single);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
deleted file mode 100644
index 5b75a384cbf349..00000000000000
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-static struct clk master_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .rate = CONFIG_SH_PCLK_FREQ,
-};
-
-static struct clk peripheral_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk bus_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk cpu_clk = {
- .parent = &master_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/*
- * The ordering of these clocks matters, do not change it.
- */
-static struct clk *onchip_clocks[] = {
- &master_clk,
- &peripheral_clk,
- &bus_clk,
- &cpu_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("master_clk", &master_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral_clk),
- CLKDEV_CON_ID("bus_clk", &bus_clk),
- CLKDEV_CON_ID("cpu_clk", &cpu_clk),
-};
-
-int __init __deprecated cpg_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
- struct clk *clk = onchip_clocks[i];
- arch_init_clk_ops(&clk->ops, i);
- if (clk->ops)
- ret |= clk_register(clk);
- }
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- clk_add_alias("fck", "sh-tmu-sh3.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.1", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-tmu.2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL);
- clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL);
-
- return ret;
-}
-
-/*
- * Placeholder for compatibility, until the lazy CPUs do this
- * on their own.
- */
-int __init __weak arch_clk_init(void)
-{
- return cpg_clk_init();
-}
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
deleted file mode 100644
index 6fb34410d630a5..00000000000000
--- a/arch/sh/kernel/cpu/clock.c
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/clock.c - SuperH clock framework
- *
- * Copyright (C) 2005 - 2009 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <asm/clock.h>
-#include <asm/machvec.h>
-
-int __init clk_init(void)
-{
- int ret;
-
-#ifndef CONFIG_COMMON_CLK
- ret = arch_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: CPU clock registration failed.\n", __func__);
- return ret;
- }
-#endif
-
- if (sh_mv.mv_clk_init) {
- ret = sh_mv.mv_clk_init();
- if (unlikely(ret)) {
- pr_err("%s: machvec clock initialization failed.\n",
- __func__);
- return ret;
- }
- }
-
-#ifndef CONFIG_COMMON_CLK
- /* Kick the child clocks.. */
- recalculate_root_clocks();
-
- /* Enable the necessary init clocks */
- clk_enable_init_clocks();
-#endif
-
- return ret;
-}
-
-
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
deleted file mode 100644
index fd6db0ab19288f..00000000000000
--- a/arch/sh/kernel/cpu/fpu.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-int init_fpu(struct task_struct *tsk)
-{
- if (tsk_used_math(tsk)) {
- if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
- unlazy_fpu(tsk, task_pt_regs(tsk));
- return 0;
- }
-
- /*
- * Memory allocation at the first usage of the FPU and other state.
- */
- if (!tsk->thread.xstate) {
- tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!tsk->thread.xstate)
- return -ENOMEM;
- }
-
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- } else {
- struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
- memset(fp, 0, xstate_size);
- fp->fpscr = FPSCR_INIT;
- }
-
- set_stopped_child_used_math(tsk);
- return 0;
-}
-
-#ifdef CONFIG_SH_FPU
-void __fpu_state_restore(void)
-{
- struct task_struct *tsk = current;
-
- restore_fpu(tsk);
-
- task_thread_info(tsk)->status |= TS_USEDFPU;
- tsk->thread.fpu_counter++;
-}
-
-void fpu_state_restore(struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (unlikely(!user_mode(regs))) {
- printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
- BUG();
- return;
- }
-
- if (!tsk_used_math(tsk)) {
- int ret;
- /*
- * does a slab alloc which can sleep
- */
- local_irq_enable();
- ret = init_fpu(tsk);
- local_irq_disable();
- if (ret) {
- /*
- * ran out of memory!
- */
- force_sig(SIGKILL);
- return;
- }
- }
-
- grab_fpu(regs);
-
- __fpu_state_restore();
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
- TRAP_HANDLER_DECL;
-
- fpu_state_restore(regs);
-}
-#endif /* CONFIG_SH_FPU */
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
deleted file mode 100644
index 1d008745877ff8..00000000000000
--- a/arch/sh/kernel/cpu/init.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/init.c
- *
- * CPU init code
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/log2.h>
-#include <asm/mmu_context.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/cache.h>
-#include <asm/elf.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/sh_bios.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_SH_FPU
-#define cpu_has_fpu 1
-#else
-#define cpu_has_fpu 0
-#endif
-
-#ifdef CONFIG_SH_DSP
-#define cpu_has_dsp 1
-#else
-#define cpu_has_dsp 0
-#endif
-
-/*
- * Generic wrapper for command line arguments to disable on-chip
- * peripherals (nofpu, nodsp, and so forth).
- */
-#define onchip_setup(x) \
-static int x##_disabled = !cpu_has_##x; \
- \
-static int x##_setup(char *opts) \
-{ \
- x##_disabled = 1; \
- return 1; \
-} \
-__setup("no" __stringify(x), x##_setup);
-
-onchip_setup(fpu);
-onchip_setup(dsp);
-
-#ifdef CONFIG_SPECULATIVE_EXECUTION
-#define CPUOPM 0xff2f0000
-#define CPUOPM_RABD (1 << 5)
-
-static void speculative_execution_init(void)
-{
- /* Clear RABD */
- __raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
-
- /* Flush the update */
- (void)__raw_readl(CPUOPM);
- ctrl_barrier();
-}
-#else
-#define speculative_execution_init() do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH4A
-#define EXPMASK 0xff2f0004
-#define EXPMASK_RTEDS (1 << 0)
-#define EXPMASK_BRDSSLP (1 << 1)
-#define EXPMASK_MMCAW (1 << 4)
-
-static void expmask_init(void)
-{
- unsigned long expmask = __raw_readl(EXPMASK);
-
- /*
- * Future proofing.
- *
- * Disable support for slottable sleep instruction, non-nop
- * instructions in the rte delay slot, and associative writes to
- * the memory-mapped cache array.
- */
- expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
-
- __raw_writel(expmask, EXPMASK);
- ctrl_barrier();
-}
-#else
-#define expmask_init() do { } while (0)
-#endif
-
-/* 2nd-level cache init */
-void __attribute__ ((weak)) l2_cache_init(void)
-{
-}
-
-/*
- * Generic first-level cache init
- */
-#if !defined(CONFIG_CPU_J2)
-static void cache_init(void)
-{
- unsigned long ccr, flags;
-
- jump_to_uncached();
- ccr = __raw_readl(SH_CCR);
-
- /*
- * At this point we don't know whether the cache is enabled or not - a
- * bootloader may have enabled it. There are at least 2 things that
- * could be dirty in the cache at this point:
- * 1. kernel command line set up by boot loader
- * 2. spilled registers from the prolog of this function
- * => before re-initialising the cache, we must do a purge of the whole
- * cache out to memory for safety. As long as nothing is spilled
- * during the loop to lines that have already been done, this is safe.
- * - RPC
- */
- if (ccr & CCR_CACHE_ENABLE) {
- unsigned long ways, waysize, addrstart;
-
- waysize = current_cpu_data.dcache.sets;
-
-#ifdef CCR_CACHE_ORA
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to flush..
- */
- if (ccr & CCR_CACHE_ORA)
- waysize >>= 1;
-#endif
-
- waysize <<= current_cpu_data.dcache.entry_shift;
-
-#ifdef CCR_CACHE_EMODE
- /* If EMODE is not set, we only have 1 way to flush. */
- if (!(ccr & CCR_CACHE_EMODE))
- ways = 1;
- else
-#endif
- ways = current_cpu_data.dcache.ways;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz)
- __raw_writel(0, addr);
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
- }
-
- /*
- * Default CCR values .. enable the caches
- * and invalidate them immediately..
- */
- flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE;
-
-#ifdef CCR_CACHE_EMODE
- /* Force EMODE if possible */
- if (current_cpu_data.dcache.ways > 1)
- flags |= CCR_CACHE_EMODE;
- else
- flags &= ~CCR_CACHE_EMODE;
-#endif
-
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- /* Write-through */
- flags |= CCR_CACHE_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- /* Write-back */
- flags |= CCR_CACHE_CB;
-#else
- /* Off */
- flags &= ~CCR_CACHE_ENABLE;
-#endif
-
- l2_cache_init();
-
- __raw_writel(flags, SH_CCR);
- back_to_cached();
-}
-#else
-#define cache_init() do { } while (0)
-#endif
-
-#define CSHAPE(totalsize, linesize, assoc) \
- ((totalsize & ~0xff) | (linesize << 4) | assoc)
-
-#define CACHE_DESC_SHAPE(desc) \
- CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways)
-
-static void detect_cache_shape(void)
-{
- l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache);
-
- if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED)
- l1i_cache_shape = l1d_cache_shape;
- else
- l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache);
-
- if (current_cpu_data.flags & CPU_HAS_L2_CACHE)
- l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache);
- else
- l2_cache_shape = -1; /* No S-cache */
-}
-
-static void fpu_init(void)
-{
- /* Disable the FPU */
- if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
- printk("FPU Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_FPU;
- }
-
- disable_fpu();
- clear_used_math();
-}
-
-#ifdef CONFIG_SH_DSP
-static void release_dsp(void)
-{
- unsigned long sr;
-
- /* Clear SR.DSP bit */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "and\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- : "=&r" (sr)
- : "r" (~SR_DSP)
- );
-}
-
-static void dsp_init(void)
-{
- unsigned long sr;
-
- /*
- * Set the SR.DSP bit, wait for one instruction, and then read
- * back the SR value.
- */
- __asm__ __volatile__ (
- "stc\tsr, %0\n\t"
- "or\t%1, %0\n\t"
- "ldc\t%0, sr\n\t"
- "nop\n\t"
- "stc\tsr, %0\n\t"
- : "=&r" (sr)
- : "r" (SR_DSP)
- );
-
- /* If the DSP bit is still set, this CPU has a DSP */
- if (sr & SR_DSP)
- current_cpu_data.flags |= CPU_HAS_DSP;
-
- /* Disable the DSP */
- if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
- printk("DSP Disabled\n");
- current_cpu_data.flags &= ~CPU_HAS_DSP;
- }
-
- /* Now that we've determined the DSP status, clear the DSP bit. */
- release_dsp();
-}
-#else
-static inline void dsp_init(void) { }
-#endif /* CONFIG_SH_DSP */
-
-/**
- * cpu_init
- *
- * This is our initial entry point for each CPU, and is invoked on the
- * boot CPU prior to calling start_kernel(). For SMP, a combination of
- * this and start_secondary() will bring up each processor to a ready
- * state prior to hand forking the idle loop.
- *
- * We do all of the basic processor init here, including setting up
- * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
- * subsequently platform_setup()) things like determining the CPU
- * subtype and initial configuration will all be done.
- *
- * Each processor family is still responsible for doing its own probing
- * and cache configuration in cpu_probe().
- */
-asmlinkage void cpu_init(void)
-{
- current_thread_info()->cpu = hard_smp_processor_id();
-
- /* First, probe the CPU */
- cpu_probe();
-
- if (current_cpu_data.type == CPU_SH_NONE)
- panic("Unknown CPU");
-
- /* First setup the rest of the I-cache info */
- current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
- current_cpu_data.icache.linesz;
-
- current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
- current_cpu_data.icache.linesz;
-
- /* And the D-cache too */
- current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
- current_cpu_data.dcache.linesz;
-
- current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
- current_cpu_data.dcache.linesz;
-
- /* Init the cache */
- cache_init();
-
- if (raw_smp_processor_id() == 0) {
-#ifdef CONFIG_MMU
- shm_align_mask = max_t(unsigned long,
- current_cpu_data.dcache.way_size - 1,
- PAGE_SIZE - 1);
-#else
- shm_align_mask = PAGE_SIZE - 1;
-#endif
-
- /* Boot CPU sets the cache shape */
- detect_cache_shape();
- }
-
- fpu_init();
- dsp_init();
-
- /*
- * Initialize the per-CPU ASID cache very early, since the
- * TLB flushing routines depend on this being setup.
- */
- current_cpu_data.asid_cache = NO_CONTEXT;
-
- current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32;
-
- speculative_execution_init();
- expmask_init();
-
- /* Do the rest of the boot processor setup */
- if (raw_smp_processor_id() == 0) {
- /* Save off the BIOS VBR, if there is one */
- sh_bios_vbr_init();
-
- /*
- * Setup VBR for boot CPU. Secondary CPUs do this through
- * start_secondary().
- */
- per_cpu_trap_init();
-
- /*
- * Boot processor to setup the FP and extended state
- * context info.
- */
- init_thread_xstate();
- }
-}
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
deleted file mode 100644
index e4578cde46ba26..00000000000000
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH CPU-specific IRQ handlers.
-#
-obj-y += imask.o
-obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
deleted file mode 100644
index 572585c3f2fd8c..00000000000000
--- a/arch/sh/kernel/cpu/irq/imask.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/imask.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- *
- * Simple interrupt handling using IMASK of SR register.
- *
- */
-/* NOTE: Will not work on level 15 */
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <linux/bitmap.h>
-#include <asm/irq.h>
-
-/* Bitmap of IRQ masked */
-#define IMASK_PRIORITY 15
-
-static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
-static int interrupt_priority;
-
-static inline void set_interrupt_registers(int ip)
-{
- unsigned long __dummy;
-
- asm volatile(
-#ifdef CONFIG_CPU_HAS_SR_RB
- "ldc %2, r6_bank\n\t"
-#endif
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- "shlr2 %0\n\t"
- "cmp/eq #0x3c, %0\n\t"
- "bt/s 1f ! CLI-ed\n\t"
- " stc sr, %0\n\t"
- "and %1, %0\n\t"
- "or %2, %0\n\t"
- "ldc %0, sr\n"
- "1:"
- : "=&z" (__dummy)
- : "r" (~0xf0), "r" (ip << 4)
- : "t");
-}
-
-static void mask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- clear_bit(irq, imask_mask);
- if (interrupt_priority < IMASK_PRIORITY - irq)
- interrupt_priority = IMASK_PRIORITY - irq;
- set_interrupt_registers(interrupt_priority);
-}
-
-static void unmask_imask_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
-
- set_bit(irq, imask_mask);
- interrupt_priority = IMASK_PRIORITY -
- find_first_zero_bit(imask_mask, IMASK_PRIORITY);
- set_interrupt_registers(interrupt_priority);
-}
-
-static struct irq_chip imask_irq_chip = {
- .name = "SR.IMASK",
- .irq_mask = mask_imask_irq,
- .irq_unmask = unmask_imask_irq,
- .irq_mask_ack = mask_imask_irq,
-};
-
-void make_imask_irq(unsigned int irq)
-{
- irq_set_chip_and_handler_name(irq, &imask_irq_chip, handle_level_irq,
- "level");
-}
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
deleted file mode 100644
index d41bce71f211fd..00000000000000
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Interrupt handling for IPR-based IRQ.
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2006 Paul Mundt
- *
- * Supported system:
- * On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729.
- * Hitachi SolutionEngine external I/O:
- * MS7709SE01, MS7709ASE01, and MS7750SE01
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-
-static inline struct ipr_desc *get_ipr_desc(struct irq_data *data)
-{
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- return container_of(chip, struct ipr_desc, chip);
-}
-
-static void disable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set the priority in IPR to 0 */
- __raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
- (void)__raw_readw(addr); /* Read back to flush write posting */
-}
-
-static void enable_ipr_irq(struct irq_data *data)
-{
- struct ipr_data *p = irq_data_get_irq_chip_data(data);
- unsigned long addr = get_ipr_desc(data)->ipr_offsets[p->ipr_idx];
- /* Set priority in IPR back to original value */
- __raw_writew(__raw_readw(addr) | (p->priority << p->shift), addr);
-}
-
-/*
- * The shift value is now the number of bits to shift, not the number of
- * bits/4. This is to make it easier to read the value directly from the
- * datasheets. The IPR address is calculated using the ipr_offset table.
- */
-void register_ipr_controller(struct ipr_desc *desc)
-{
- int i;
-
- desc->chip.irq_mask = disable_ipr_irq;
- desc->chip.irq_unmask = enable_ipr_irq;
-
- for (i = 0; i < desc->nr_irqs; i++) {
- struct ipr_data *p = desc->ipr_data + i;
- int res;
-
- BUG_ON(p->ipr_idx >= desc->nr_offsets);
- BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
-
- res = irq_alloc_desc_at(p->irq, numa_node_id());
- if (unlikely(res != p->irq && res != -EEXIST)) {
- printk(KERN_INFO "can not get irq_desc for %d\n",
- p->irq);
- continue;
- }
-
- disable_irq_nosync(p->irq);
- irq_set_chip_and_handler_name(p->irq, &desc->chip,
- handle_level_irq, "level");
- irq_set_chip_data(p->irq, p);
- disable_ipr_irq(irq_get_irq_data(p->irq));
- }
-}
-EXPORT_SYMBOL(register_ipr_controller);
diff --git a/arch/sh/kernel/cpu/pfc.c b/arch/sh/kernel/cpu/pfc.c
deleted file mode 100644
index 062056ede88de4..00000000000000
--- a/arch/sh/kernel/cpu/pfc.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH Pin Function Control Initialization
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <cpu/pfc.h>
-
-static struct platform_device sh_pfc_device = {
- .id = -1,
-};
-
-int __init sh_pfc_register(const char *name,
- struct resource *resource, u32 num_resources)
-{
- sh_pfc_device.name = name;
- sh_pfc_device.num_resources = num_resources;
- sh_pfc_device.resource = resource;
-
- return platform_device_register(&sh_pfc_device);
-}
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
deleted file mode 100644
index a306bcd6b34130..00000000000000
--- a/arch/sh/kernel/cpu/proc.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/machvec.h>
-#include <asm/processor.h>
-
-static const char *cpu_name[] = {
- [CPU_SH7201] = "SH7201",
- [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
- [CPU_SH7264] = "SH7264", [CPU_SH7269] = "SH7269",
- [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
- [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
- [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
- [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
- [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729",
- [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S",
- [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751",
- [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760",
- [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
- [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
- [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
- [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
- [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
- [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
- [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
- [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
- [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734",
- [CPU_J2] = "J2",
- [CPU_SH_NONE] = "Unknown"
-};
-
-const char *get_cpu_subtype(struct sh_cpuinfo *c)
-{
- return cpu_name[c->type];
-}
-EXPORT_SYMBOL(get_cpu_subtype);
-
-#ifdef CONFIG_PROC_FS
-/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
-static const char *cpu_flags[] = {
- "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
- "ptea", "llsc", "l2", "op32", "pteaex", NULL
-};
-
-static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
-{
- unsigned long i;
-
- seq_printf(m, "cpu flags\t:");
-
- if (!c->flags) {
- seq_printf(m, " %s\n", cpu_flags[0]);
- return;
- }
-
- for (i = 0; cpu_flags[i]; i++)
- if ((c->flags & (1 << i)))
- seq_printf(m, " %s", cpu_flags[i+1]);
-
- seq_printf(m, "\n");
-}
-
-static void show_cacheinfo(struct seq_file *m, const char *type,
- struct cache_info info)
-{
- unsigned int cache_size;
-
- cache_size = info.ways * info.sets * info.linesz;
-
- seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
- type, cache_size >> 10, info.ways);
-}
-
-/*
- * Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- struct sh_cpuinfo *c = v;
- unsigned int cpu = c - cpu_data;
-
- if (!cpu_online(cpu))
- return 0;
-
- if (cpu == 0)
- seq_printf(m, "machine\t\t: %s\n", get_system_type());
- else
- seq_printf(m, "\n");
-
- seq_printf(m, "processor\t: %d\n", cpu);
- seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
- seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
- if (c->cut_major == -1)
- seq_printf(m, "cut\t\t: unknown\n");
- else if (c->cut_minor == -1)
- seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
- else
- seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
-
- show_cpuflags(m, c);
-
- seq_printf(m, "cache type\t: ");
-
- /*
- * Check for what type of cache we have, we support both the
- * unified cache on the SH-2 and SH-3, as well as the harvard
- * style cache on the SH-4.
- */
- if (c->icache.flags & SH_CACHE_COMBINED) {
- seq_printf(m, "unified\n");
- show_cacheinfo(m, "cache", c->icache);
- } else {
- seq_printf(m, "split (harvard)\n");
- show_cacheinfo(m, "icache", c->icache);
- show_cacheinfo(m, "dcache", c->dcache);
- }
-
- /* Optional secondary cache */
- if (c->flags & CPU_HAS_L2_CACHE)
- show_cacheinfo(m, "scache", c->scache);
-
- seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
-
- seq_printf(m, "bogomips\t: %lu.%02lu\n",
- c->loops_per_jiffy/(500000/HZ),
- (c->loops_per_jiffy/(5000/HZ)) % 100);
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile
deleted file mode 100644
index 214c3a5b184ace..00000000000000
--- a/arch/sh/kernel/cpu/sh2/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2 backends.
-#
-
-obj-y := ex.o probe.o entry.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
-
-# SMP setup
-smp-$(CONFIG_CPU_J2) := smp-j2.o
-obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
deleted file mode 100644
index d66d194c7731b9..00000000000000
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/clock-sh7619.c
- *
- * SH7619 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/processor.h>
-
-static const int pll1rate[] = {1,2};
-static const int pfc_divisors[] = {1,2,0,4};
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7619_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
-}
-
-static struct sh_clk_ops sh7619_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7619_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7619_clk_ops[] = {
- &sh7619_master_clk_ops,
- &sh7619_module_clk_ops,
- &sh7619_bus_clk_ops,
- &sh7619_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
- test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- BUG_ON(!pll2_mult);
-
- if (idx < ARRAY_SIZE(sh7619_clk_ops))
- *ops = sh7619_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
deleted file mode 100644
index 0a1c2bf216bc03..00000000000000
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ /dev/null
@@ -1,373 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/entry.S
- *
- * The SH-2 exception entry
- *
- * Copyright (C) 2005-2008 Yoshinori Sato
- * Copyright (C) 2005 AXE,Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- mov.l r3,@-sp
- cli
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov.l @r2,r0
- mov.l @(5*4,r15),r3 ! previous SR
- or r0,r3 ! set MD
- tst r0,r0
- bf/s 1f ! previous mode check
- mov.l r3,@(5*4,r15) ! update SR
- ! switch to kernel mode
- mov.l __md_bit,r0
- mov.l r0,@r2 ! enter kernel mode
- mov.l $current_thread_info,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r0
- mov.l @r0,r0
- mov.l @r0,r0
- shll2 r0
- add r0,r2
-#endif
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(5*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r3
- add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame
- mov.l r3,@-r15 ! original SP
- mov.l r14,@-r15
- mov.l r13,@-r15
- mov.l r12,@-r15
- mov.l r11,@-r15
- mov.l r10,@-r15
- mov.l r9,@-r15
- mov.l r8,@-r15
- mov.l r7,@-r15
- mov.l r6,@-r15
- mov.l r5,@-r15
- mov.l r4,@-r15
- mov r1,r9 ! save TRA
- mov r2,r8 ! copy user -> kernel stack
- mov.l @(0,r8),r3
- mov.l r3,@-r15
- mov.l @(4,r8),r2
- mov.l r2,@-r15
- mov.l @(12,r8),r1
- mov.l r1,@-r15
- mov.l @(8,r8),r0
- bra 2f
- mov.l r0,@-r15
-1:
- ! in kernel exception
- mov #(22-4-4-1)*4+4,r0
- mov r15,r2
- sub r0,r15
- mov.l @r2+,r0 ! old R3
- mov.l r0,@-r15
- mov.l @r2+,r0 ! old R2
- mov.l r0,@-r15
- mov.l @(4,r2),r0 ! old R1
- mov.l r0,@-r15
- mov.l @r2,r0 ! old R0
- mov.l r0,@-r15
- add #8,r2
- mov.l @r2+,r3 ! old PC
- mov.l @r2+,r0 ! old SR
- add #-4,r2 ! exception frame stub (sr)
- mov.l r1,@-r2 ! TRA
- sts.l macl, @-r2
- sts.l mach, @-r2
- stc.l gbr, @-r2
- mov.l r0,@-r2 ! save old SR
- sts.l pr,@-r2
- mov.l r3,@-r2 ! save old PC
- mov r2,r0
- add #8*4,r0
- mov.l r0,@-r2 ! save old SP
- mov.l r14,@-r2
- mov.l r13,@-r2
- mov.l r12,@-r2
- mov.l r11,@-r2
- mov.l r10,@-r2
- mov.l r9,@-r2
- mov.l r8,@-r2
- mov.l r7,@-r2
- mov.l r6,@-r2
- mov.l r5,@-r2
- mov.l r4,@-r2
- mov r1,r9
- mov.l @(OFF_R0,r15),r0
- mov.l @(OFF_R1,r15),r1
- mov.l @(OFF_R2,r15),r2
- mov.l @(OFF_R3,r15),r3
-2:
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-#ifdef CONFIG_CPU_J2
- mov #16,r8
- cmp/hs r8,r9
- bt interrupt_entry ! 31 > vec >= 16 is interrupt
-#endif
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 6f,r9
- mov.l 7f,r8
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov #OFF_SR,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov #OFF_SP,r2
- mov.l @(r0,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov #OFF_PC,r0
- mov.l @(r0,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r2
-#endif
- mov #OFF_SR,r3
- mov.l @(r0,r3),r1
- mov.l __md_bit,r3
- and r1,r3 ! copy MD bit
- mov.l r3,@r2
- shll2 r1 ! clear MD bit
- shlr2 r1
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov #OFF_PC,r3
- mov.l @(r0,r3),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
-#ifdef CONFIG_SMP
- mov.l $cpuid,r3
- mov.l @r3,r3
- mov.l @r3,r3
- shll2 r3
- add r3,r1
-#endif
- mov.l r0,@r1
- mov.l @r15+,r0
- mov.l @r15+,r1
- mov.l @r15+,r2
- mov.l @r15+,r3
- mov.l @r15+,r4
- mov.l @r15+,r5
- mov.l @r15+,r6
- mov.l @r15+,r7
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- mov.l @r15+,r11
- mov.l @r15+,r12
- mov.l @r15+,r13
- mov.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-__md_bit:
- .long 0x40000000
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-#ifdef CONFIG_SMP
-$cpuid:
- .long sh2_cpuid_addr
-#endif
-
-! common exception handler
-#include "../../entry-common.S"
-
-#ifdef CONFIG_NR_CPUS
-#define NR_CPUS CONFIG_NR_CPUS
-#else
-#define NR_CPUS 1
-#endif
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .rept NR_CPUS
- .long 0x40000000
- .endr
-
-#ifdef CONFIG_SMP
-.global sh2_cpuid_addr
-sh2_cpuid_addr:
- .long dummy_cpuid
-dummy_cpuid:
- .long 0
-#endif
-
- .section .bss
-__current_thread_info:
- .rept NR_CPUS
- .long 0
- .endr
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
deleted file mode 100644
index dd0cc887a3ca2c..00000000000000
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2/ex.S
- *
- * The SH-2 exception vector table
- *
- * Copyright (C) 2005 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-exception_entry:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline:
- mov.l r0,@-sp
- mov.l $exception_handler,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-$exception_entry:
- .long exception_entry
-$exception_handler:
- .long exception_handler
-!
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
deleted file mode 100644
index d342ea08843f6a..00000000000000
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2/probe.c
- *
- * CPU Subtype Probing for SH-2.
- *
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/of_fdt.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_CPU_J2)
-extern u32 __iomem *j2_ccr_base;
-static int __init scan_cache(unsigned long node, const char *uname,
- int depth, void *data)
-{
- if (!of_flat_dt_is_compatible(node, "jcore,cache"))
- return 0;
-
- j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
-
- return 1;
-}
-#endif
-
-void __ref cpu_probe(void)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
- boot_cpu_data.type = CPU_SH7619;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1<<12);
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-#endif
-
-#if defined(CONFIG_CPU_J2)
-#if defined(CONFIG_SMP)
- unsigned cpu = hard_smp_processor_id();
-#else
- unsigned cpu = 0;
-#endif
- if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
- if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
- if (cpu != 0) return;
- boot_cpu_data.type = CPU_J2;
-
- /* These defaults are appropriate for the original/current
- * J2 cache. Once there is a proper framework for getting cache
- * info from device tree, we should switch to that. */
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.linesz = 32;
- boot_cpu_data.dcache.flags = 0;
-
- boot_cpu_data.flags |= CPU_HAS_CAS_L;
-#else
- /*
- * SH-2 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
-#endif
- boot_cpu_data.icache = boot_cpu_data.dcache;
- boot_cpu_data.family = CPU_FAMILY_SH2;
-}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
deleted file mode 100644
index b1c877b6a4207f..00000000000000
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7619 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, EDMAC, CMT0, CMT1,
- SCIF0, SCIF1, SCIF2,
- HIF_HIFI, HIF_HIFBI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- SIOF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
- INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
- INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
- INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
- INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
- INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
- INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
- INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
- INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
- INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
- INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
- INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
- INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
- INTC_IRQ(SIOF, 108),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
- { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
- { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
- { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xf8400000, 0x100),
- DEFINE_RES_IRQ(88),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xf8410000, 0x100),
- DEFINE_RES_IRQ(92),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xf8420000, 0x100),
- DEFINE_RES_IRQ(96),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_eth_plat_data eth_platform_data = {
- .phy = 1,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = 0xfb000000,
- .end = 0xfb0001c7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 85,
- .end = 85,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device eth_device = {
- .name = "sh7619-ether",
- .id = -1,
- .dev = {
- .platform_data = ð_platform_data,
- },
- .num_resources = ARRAY_SIZE(eth_resources),
- .resource = eth_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xf84a0070, 0x10),
- DEFINE_RES_IRQ(86),
- DEFINE_RES_IRQ(87),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct platform_device *sh7619_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- ð_device,
- &cmt_device,
-};
-
-static int __init sh7619_devices_setup(void)
-{
- return platform_add_devices(sh7619_devices,
- ARRAY_SIZE(sh7619_devices));
-}
-arch_initcall(sh7619_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7619_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
-};
-
-#define STBCR3 0xf80a0000
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
-
- sh_early_platform_add_devices(sh7619_early_devices,
- ARRAY_SIZE(sh7619_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2/smp-j2.c b/arch/sh/kernel/cpu/sh2/smp-j2.c
deleted file mode 100644
index d0d5d81455ae1e..00000000000000
--- a/arch/sh/kernel/cpu/sh2/smp-j2.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SMP support for J2 processor
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/cmpxchg.h>
-
-DEFINE_PER_CPU(unsigned, j2_ipi_messages);
-
-extern u32 *sh2_cpuid_addr;
-static u32 *j2_ipi_trigger;
-static int j2_ipi_irq;
-
-static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned cpu = hard_smp_processor_id();
- volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu);
- unsigned messages, i;
-
- do messages = *pmsg;
- while (cmpxchg(pmsg, messages, 0) != messages);
-
- if (!messages) return IRQ_NONE;
-
- for (i=0; i<SMP_MSG_NR; i++)
- if (messages & (1U<<i))
- smp_message_recv(i);
-
- return IRQ_HANDLED;
-}
-
-static void j2_smp_setup(void)
-{
-}
-
-static void j2_prepare_cpus(unsigned int max_cpus)
-{
- struct device_node *np;
- unsigned i, max = 1;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller");
- if (!np)
- goto out;
-
- j2_ipi_irq = irq_of_parse_and_map(np, 0);
- j2_ipi_trigger = of_iomap(np, 0);
- if (!j2_ipi_irq || !j2_ipi_trigger)
- goto out;
-
- np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio");
- if (!np)
- goto out;
-
- sh2_cpuid_addr = of_iomap(np, 0);
- if (!sh2_cpuid_addr)
- goto out;
-
- if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU,
- "ipi", (void *)j2_ipi_interrupt_handler) != 0)
- goto out;
-
- max = max_cpus;
-out:
- /* Disable any cpus past max_cpus, or all secondaries if we didn't
- * get the necessary resources to support SMP. */
- for (i=max; i<NR_CPUS; i++) {
- set_cpu_possible(i, false);
- set_cpu_present(i, false);
- }
-}
-
-static void j2_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- struct device_node *np;
- u32 regs[2];
- void __iomem *release, *initpc;
-
- if (!cpu) return;
-
- np = of_get_cpu_node(cpu, NULL);
- if (!np) return;
-
- if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return;
- release = ioremap(regs[0], sizeof(u32));
- initpc = ioremap(regs[1], sizeof(u32));
-
- __raw_writel(entry_point, initpc);
- __raw_writel(1, release);
-
- iounmap(initpc);
- iounmap(release);
-
- pr_info("J2 SMP: requested start of cpu %u\n", cpu);
-}
-
-static unsigned int j2_smp_processor_id(void)
-{
- return __raw_readl(sh2_cpuid_addr);
-}
-
-static void j2_send_ipi(unsigned int cpu, unsigned int message)
-{
- volatile unsigned *pmsg;
- unsigned old;
- unsigned long val;
-
- /* There is only one IPI interrupt shared by all messages, so
- * we keep a separate interrupt flag per message type in sw. */
- pmsg = &per_cpu(j2_ipi_messages, cpu);
- do old = *pmsg;
- while (cmpxchg(pmsg, old, old|(1U<<message)) != old);
-
- /* Generate the actual interrupt by writing to CCRn bit 28. */
- val = __raw_readl(j2_ipi_trigger + cpu);
- __raw_writel(val | (1U<<28), j2_ipi_trigger + cpu);
-}
-
-static struct plat_smp_ops j2_smp_ops = {
- .smp_setup = j2_smp_setup,
- .prepare_cpus = j2_prepare_cpus,
- .start_cpu = j2_start_cpu,
- .smp_processor_id = j2_smp_processor_id,
- .send_ipi = j2_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
-
-CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops);
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
deleted file mode 100644
index 2a7515b658fd38..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-2A backends.
-#
-
-obj-y := common.o probe.o opcode_helper.o
-
-common-y += ex.o entry.o
-
-obj-$(CONFIG_SH_FPU) += fpu.o
-
-obj-$(CONFIG_CPU_SUBTYPE_SH7201) += setup-sh7201.o clock-sh7201.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7264) += setup-sh7264.o clock-sh7264.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7269) += setup-sh7269.o clock-sh7269.o
-obj-$(CONFIG_CPU_SUBTYPE_MXG) += setup-mxg.o clock-sh7206.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) := pinmux-sh7203.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o
-
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
deleted file mode 100644
index 5a5daaafb27a49..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7201.c
- *
- * SH7201 support for the clock framework
- *
- * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate = 10000000 * pll2_mult *
- pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7201_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7201_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7201_clk_ops[] = {
- &sh7201_master_clk_ops,
- &sh7201_module_clk_ops,
- &sh7201_bus_clk_ops,
- &sh7201_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 2;
- else
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7201_clk_ops))
- *ops = sh7201_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
deleted file mode 100644
index c6205394566441..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7203.c
- *
- * SH7203 support for the clock framework
- *
- * Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd)
- *
- * Based on clock-sh7263.c
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={8,12,16,0};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
-}
-
-static struct sh_clk_ops sh7203_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7203_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx-2];
-}
-
-static struct sh_clk_ops sh7203_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7203_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7203_clk_ops[] = {
- &sh7203_master_clk_ops,
- &sh7203_module_clk_ops,
- &sh7203_bus_clk_ops,
- &sh7203_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
- else if (test_mode_pin(MODE_PIN0))
- pll2_mult = 2;
- else
- pll2_mult = 1;
-
- if (idx < ARRAY_SIZE(sh7203_clk_ops))
- *ops = sh7203_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
deleted file mode 100644
index d286d7b918d5e3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7206.c
- *
- * SH7206 support for the clock framework
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Based on clock-sh4.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static const int pll1rate[]={1,2,3,4,6,8};
-static const int pfc_divisors[]={1,2,3,4,6,8,12};
-#define ifc_divisors pfc_divisors
-
-static unsigned int pll2_mult;
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
-}
-
-static struct sh_clk_ops sh7206_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FREQCR) & 0x0007);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7206_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7206_clk_ops[] = {
- &sh7206_master_clk_ops,
- &sh7206_module_clk_ops,
- &sh7206_bus_clk_ops,
- &sh7206_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
- pll2_mult = 1;
- else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
- pll2_mult = 2;
- else if (test_mode_pin(MODE_PIN1))
- pll2_mult = 4;
-
- if (idx < ARRAY_SIZE(sh7206_clk_ops))
- *ops = sh7206_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
deleted file mode 100644
index d9acc1ed79817c..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7264.c
- *
- * SH7264 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7264 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-#define STBCR8 0xfffe041c
-
-static const unsigned int pll1rate[] = {8, 12};
-
-static unsigned int pll1_div;
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 18000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long rate = clk->parent->rate / pll1_div;
- return rate * pll1rate[(__raw_readw(FRQCR) >> 8) & 1];
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
-};
-
-static int div2[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_P,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 4, 0x7, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x78, CLK_ENABLE_REG_16BIT),
-};
-
-enum { MSTP77, MSTP74, MSTP72,
- MSTP60,
- MSTP35, MSTP34, MSTP33, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP77] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 7, 0), /* SCIF */
- [MSTP74] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 4, 0), /* VDC */
- [MSTP72] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR6, 0, 0), /* USB */
- [MSTP35] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 6, 0), /* MTU2 */
- [MSTP34] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 4, 0), /* SDHI0 */
- [MSTP33] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 3, 0), /* SDHI1 */
- [MSTP32] = SH_CLK_MSTP8(&div4_clks[DIV4_P], STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP77]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP77]),
- CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP34]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP33]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- if (test_mode_pin(MODE_PIN0)) {
- if (test_mode_pin(MODE_PIN1))
- pll1_div = 3;
- else
- pll1_div = 4;
- } else
- pll1_div = 1;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
deleted file mode 100644
index c17ab0d7653888..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
- *
- * SH7269 clock framework support
- *
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7269 registers */
-#define FRQCR 0xfffe0010
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-#define STBCR5 0xfffe0410
-#define STBCR6 0xfffe0414
-#define STBCR7 0xfffe0418
-
-#define PLL_RATE 20
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 13340000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
- return clk->parent->rate / 8;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
- .recalc = peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
- .ops = &peripheral0_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
- return clk->parent->rate / 4;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
- .recalc = peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
- .ops = &peripheral1_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
- &peripheral0_clk,
- &peripheral1_clk,
-};
-
-static int div2[] = { 1, 2, 0, 4 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_B,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
-};
-
-enum { MSTP72,
- MSTP60,
- MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP35, MSTP32, MSTP30,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
- [MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
- [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
- [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
- [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
- [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
- [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
- [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
- [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
- [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
- [MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
- [MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
- [MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
-
- /* MSTP clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP47]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP46]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP45]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP44]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP43]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP42]),
- CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP41]),
- CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
- CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
deleted file mode 100644
index 9f11fc8b505251..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ /dev/null
@@ -1,247 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/entry.S
- *
- * The SH-2A exception entry
- *
- * Copyright (C) 2008 Yoshinori Sato
- * Based on arch/sh/kernel/cpu/sh2/entry.S
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/page.h>
-
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+2*4)
-OFF_TRA = (16*4+6*4)
-
-#include <asm/entry-macros.S>
-
-ENTRY(exception_handler)
- ! stack
- ! r0 <- point sp
- ! r1
- ! pc
- ! sr
- ! r0 = temporary
- ! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
- mov.l r2,@-sp
- cli
- mov.l $cpu_mode,r2
- bld.b #6,@(0,r2) !previus SR.MD
- bst.b #6,@(4*4,r15) !set cpu mode to SR.MD
- bt 1f
- ! switch to kernel mode
- bset.b #6,@(0,r2) !set SR.MD
- mov.l $current_thread_info,r2
- mov.l @r2,r2
- mov #(THREAD_SIZE >> 8),r0
- shll8 r0
- add r2,r0 ! r0 = kernel stack tail
- mov r15,r2 ! r2 = user stack top
- mov r0,r15 ! switch kernel stack
- mov.l r1,@-r15 ! TRA
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- mov.l @(4*4,r2),r0
- mov.l r0,@-r15 ! original SR
- sts.l pr,@-r15
- mov.l @(3*4,r2),r0
- mov.l r0,@-r15 ! original PC
- mov r2,r0
- add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame
- lds r0,pr ! pr = original SP
- movmu.l r3,@-r15 ! save regs
- mov r2,r8 ! r8 = previus stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore previous stack
- mov.l @r8+,r2
- mov.l @r8+,r0
- mov.l @r8+,r1
- bra 2f
- movml.l r2,@-r15
-1:
- ! in kernel exception
- mov r15,r2
- add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
- movmu.l r3,@-r15
- mov r2,r8 ! r8 = previous stack top
- mov r1,r9 ! r9 = interrupt vector
- ! restore exception frame & regs
- mov.l @r8+,r2 ! old R2
- mov.l @r8+,r0 ! old R0
- mov.l @r8+,r1 ! old R1
- mov.l @r8+,r10 ! old PC
- mov.l @r8+,r11 ! old SR
- movml.l r2,@-r15
- mov.l r10,@(OFF_PC,r15)
- mov.l r11,@(OFF_SR,r15)
- mov.l r8,@(OFF_SP,r15) ! save old sp
- mov r15,r8
- add #OFF_TRA + 4,r8
- mov.l r9,@-r8
- sts.l macl,@-r8
- sts.l mach,@-r8
- stc.l gbr,@-r8
- add #-4,r8
- sts.l pr,@-r8
-2:
- ! dispatch exception / interrupt
- mov #64,r8
- cmp/hs r8,r9
- bt interrupt_entry ! vec >= 64 is interrupt
- mov #31,r8
- cmp/hs r8,r9
- bt trap_entry ! 64 > vec >= 31 is trap
-
- mov.l 4f,r8
- mov r9,r4
- shll2 r9
- add r9,r8
- mov.l @r8,r8 ! exception handler address
- tst r8,r8
- bf 3f
- mov.l 8f,r8 ! unhandled exception
-3:
- mov.l 5f,r10
- jmp @r8
- lds r10,pr
-
-interrupt_entry:
- mov r9,r4
- mov r15,r5
- mov.l 7f,r8
- mov.l 6f,r9
- jmp @r8
- lds r9,pr
-
- .align 2
-4: .long exception_handling_table
-5: .long ret_from_exception
-6: .long ret_from_irq
-7: .long do_IRQ
-8: .long exception_error
-
-trap_entry:
- mov #0x30,r8
- cmp/ge r8,r9 ! vector 0x1f-0x2f is systemcall
- bt 1f
- mov #0x1f,r9 ! convert to unified SH2/3/4 trap number
-1:
- shll2 r9 ! TRA
- bra system_call ! jump common systemcall entry
- mov r9,r8
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov r15,r0
- add #(22-4)*4-4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l @(OFF_SP,r0),r1
- mov.l @(OFF_SR,r2),r3
- mov.l r3,@-r1
- mov.l @(OFF_SP,r2),r3
- mov.l r3,@-r1
- mov r15,r0
- add #(22-4)*4-8,r0
- mov.l 1f,r2
- mov.l @r2,r2
- stc sr,r3
- mov.l r2,@r0
- mov.l r3,@(4,r0)
- mov.l r1,@(8,r0)
- movml.l @r15+,r14
- add #8,r15
- lds.l @r15+, pr
- mov.l @r15+,r15
- rte
- nop
- .align 2
-1: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-ENTRY(address_error_trap_handler)
- mov r15,r4 ! regs
- mov.l @(OFF_PC,r15),r6 ! pc
- mov.l 1f,r0
- jmp @r0
- mov #0,r5 ! writeaccess is unknown
-
- .align 2
-1: .long do_address_error
-
-restore_all:
- stc sr,r0
- or #0xf0,r0
- ldc r0,sr ! all interrupt block (same BL = 1)
- ! restore special register
- ! overlap exception frame
- mov r15,r0
- add #17*4,r0
- lds.l @r0+,pr
- add #4,r0
- ldc.l @r0+,gbr
- lds.l @r0+,mach
- lds.l @r0+,macl
- mov r15,r0
- mov.l $cpu_mode,r2
- bld.b #6,@(OFF_SR,r15)
- bst.b #6,@(0,r2) ! save CPU mode
- mov.l @(OFF_SR,r0),r1
- shll2 r1
- shlr2 r1 ! clear MD bit
- mov.l @(OFF_SP,r0),r2
- add #-8,r2
- mov.l r2,@(OFF_SP,r0) ! point exception frame top
- mov.l r1,@(4,r2) ! set sr
- mov.l @(OFF_PC,r0),r1
- mov.l r1,@r2 ! set pc
- get_current_thread_info r0, r1
- mov.l $current_thread_info,r1
- mov.l r0,@r1
- movml.l @r15+,r14
- mov.l @r15,r15
- rte
- nop
-
- .align 2
-$current_thread_info:
- .long __current_thread_info
-$cpu_mode:
- .long __cpu_mode
-
-! common exception handler
-#include "../../entry-common.S"
-
- .data
-! cpu operation mode
-! bit30 = MD (compatible SH3/4)
-__cpu_mode:
- .long 0x40000000
-
- .section .bss
-__current_thread_info:
- .long 0
-
-ENTRY(exception_handling_table)
- .space 4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
deleted file mode 100644
index ed91996287c7d9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/ex.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh2a/ex.S
- *
- * The SH-2A exception vector table
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-!
-! convert Exception Vector to Exception Number
-!
-
-! exception no 0 to 255
-exception_entry0:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline0
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline0:
- mov.l r0,@-sp
- mov.l 1f,r0
- extu.b r1,r1
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
-! exception no 256 to 511
-exception_entry1:
-no = 0
- .rept 256
- mov.l r1,@-sp
- bra exception_trampoline1
- mov #no,r1
-no = no + 1
- .endr
-exception_trampoline1:
- mov.l r0,@-sp
- extu.b r1,r1
- movi20 #0x100,r0
- add r0,r1
- mov.l 1f,r0
- jmp @r0
- extu.w r1,r1
-
- .align 2
-1: .long exception_handler
-
- !
-! Exception Vector Base
-!
- .align 2
-ENTRY(vbr_base)
-vector = 0
- .rept 256
- .long exception_entry0 + vector * 6
-vector = vector + 1
- .endr
-vector = 0
- .rept 256
- .long exception_entry1 + vector * 6
-vector = vector + 1
- .endr
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
deleted file mode 100644
index 0bcff11a4843d3..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- *
- * FIXME! These routines can be optimized in big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t"
- : "=r" (dummy)
- : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r" (FPSCR_RCHG),
- "r" (FPSCR_INIT)
- : "memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile("fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- : "=r" (dummy)
- : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- : "memory");
- disable_fpu();
-}
-
-/*
- * Emulate arithmetic ops on denormalized number for some FPU insns.
- */
-
-/* denormalized float * float */
-static int denormal_mulf(int hx, int hy)
-{
- unsigned int ix, iy;
- unsigned long long m, n;
- int exp, w;
-
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000 || ix == 0)
- return ((hx ^ hy) & 0x80000000);
-
- exp = (iy & 0x7f800000) >> 23;
- ix &= 0x007fffff;
- iy = (iy & 0x007fffff) | 0x00800000;
- m = (unsigned long long)ix * iy;
- n = m;
- w = -1;
- while (n) { n >>= 1; w++; }
-
- /* FIXME: use guard bits */
- exp += w - 126 - 46;
- if (exp > 0)
- ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23);
- else if (exp + 22 >= 0)
- ix = (int) (m >> (w - 22 - exp)) & 0x007fffff;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x80000000;
- return ix;
-}
-
-/* denormalized double * double */
-static void mult64(unsigned long long x, unsigned long long y,
- unsigned long long *highp, unsigned long long *lowp)
-{
- unsigned long long sub0, sub1, sub2, sub3;
- unsigned long long high, low;
-
- sub0 = (x >> 32) * (unsigned long) (y >> 32);
- sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32);
- sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL);
- sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL);
- low = sub3;
- high = 0LL;
- sub3 += (sub1 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- sub3 += (sub2 << 32);
- if (low > sub3)
- high++;
- low = sub3;
- high += (sub1 >> 32) + (sub2 >> 32);
- high += sub0;
- *lowp = low;
- *highp = high;
-}
-
-static inline long long rshift64(unsigned long long mh,
- unsigned long long ml, int n)
-{
- if (n >= 64)
- return mh >> (n - 64);
- return (mh << (64 - n)) | (ml >> n);
-}
-
-static long long denormal_muld(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- unsigned long long mh, ml, nh, nl;
- int exp, w;
-
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL || ix == 0)
- return ((hx ^ hy) & 0x8000000000000000LL);
-
- exp = (iy & 0x7ff0000000000000LL) >> 52;
- ix &= 0x000fffffffffffffLL;
- iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- mult64(ix, iy, &mh, &ml);
- nh = mh;
- nl = ml;
- w = -1;
- if (nh) {
- while (nh) { nh >>= 1; w++;}
- w += 64;
- } else
- while (nl) { nl >>= 1; w++;}
-
- /* FIXME: use guard bits */
- exp += w - 1022 - 52 * 2;
- if (exp > 0)
- ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL)
- | ((long long)exp << 52);
- else if (exp + 51 >= 0)
- ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL;
- else
- ix = 0;
-
- ix |= (hx ^ hy) & 0x8000000000000000LL;
- return ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static int denormal_subf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix - iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac -= iy;
- while (frac < 0x00800000) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static int denormal_addf1(unsigned int ix, unsigned int iy)
-{
- int frac;
- int exp;
-
- if (ix < 0x00800000)
- return ix + iy;
-
- exp = (ix & 0x7f800000) >> 23;
- if (exp - 1 > 31)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x007fffff) | 0x00800000;
- frac += iy;
- if (frac >= 0x01000000) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 23) | (frac & 0x007fffff);
-}
-
-static int denormal_addf(int hx, int hy)
-{
- unsigned int ix, iy;
- int sign;
-
- if ((hx ^ hy) & 0x80000000) {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000) {
- ix = denormal_subf1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x80000000;
- }
- } else {
- ix = denormal_subf1(iy, ix);
- sign ^= 0x80000000;
- }
- } else {
- sign = hx & 0x80000000;
- ix = hx & 0x7fffffff;
- iy = hy & 0x7fffffff;
- if (iy < 0x00800000)
- ix = denormal_addf1(ix, iy);
- else
- ix = denormal_addf1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/* ix - iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_subd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- int exp;
-
- if (ix < 0x0010000000000000LL)
- return ix - iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac -= iy;
- while (frac < 0x0010000000000000LL) {
- if (--exp == 0)
- return frac;
- frac <<= 1;
- }
-
- return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-/* ix + iy where iy: denormal and ix, iy >= 0 */
-static long long denormal_addd1(unsigned long long ix, unsigned long long iy)
-{
- long long frac;
- long long exp;
-
- if (ix < 0x0010000000000000LL)
- return ix + iy;
-
- exp = (ix & 0x7ff0000000000000LL) >> 52;
- if (exp - 1 > 63)
- return ix;
- iy >>= exp - 1;
- if (iy == 0)
- return ix;
-
- frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL;
- frac += iy;
- if (frac >= 0x0020000000000000LL) {
- frac >>= 1;
- ++exp;
- }
-
- return (exp << 52) | (frac & 0x000fffffffffffffLL);
-}
-
-static long long denormal_addd(long long hx, long long hy)
-{
- unsigned long long ix, iy;
- long long sign;
-
- if ((hx ^ hy) & 0x8000000000000000LL) {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL) {
- ix = denormal_subd1(ix, iy);
- if ((int) ix < 0) {
- ix = -ix;
- sign ^= 0x8000000000000000LL;
- }
- } else {
- ix = denormal_subd1(iy, ix);
- sign ^= 0x8000000000000000LL;
- }
- } else {
- sign = hx & 0x8000000000000000LL;
- ix = hx & 0x7fffffffffffffffLL;
- iy = hy & 0x7fffffffffffffffLL;
- if (iy < 0x0010000000000000LL)
- ix = denormal_addd1(ix, iy);
- else
- ix = denormal_addd1(iy, ix);
- }
-
- return sign | ix;
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void
-denormal_to_double (struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n+1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int
-ieee_fpe_handler (struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *) regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf};
-
- if (nib[0] == 0xb ||
- (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
- regs->pr = regs->pc + 4;
- if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
- nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (insn == 0x000b) { /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else {
- nextpc = regs->pc + 2;
- finsn = insn;
- }
-
-#define FPSCR_FPU_ERROR (1 << 17)
-
- if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
- /* FPU error */
- denormal_to_double (&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) { /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((hx & 0x7fffffff) >= 0x00100000)
- llx = denormal_muld(lly, llx);
- else
- llx = denormal_muld(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((hx & 0x7fffffff) >= 0x00800000)
- hx = denormal_mulf(hy, hx);
- else
- hx = denormal_mulf(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & (1 << 19);
-
- if ((fpscr & FPSCR_FPU_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal */
- llx = ((long long) hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n+1];
- lly = ((long long) hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m+1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = denormal_addd(llx, lly);
- else
- llx = denormal_addd(llx, lly ^ (1LL << 63));
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_FPU_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal */
- if ((finsn & 0xf00f) == 0xf000)
- hx = denormal_addf(hx, hy);
- else
- hx = denormal_addf(hx, hy ^ 0x80000000);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- return;
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh2a/opcode_helper.c b/arch/sh/kernel/cpu/sh2a/opcode_helper.c
deleted file mode 100644
index c509081d90b9af..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/opcode_helper.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/opcode_helper.c
- *
- * Helper for the SH-2A 32-bit opcodes.
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-
-/*
- * Instructions on SH are generally fixed at 16-bits, however, SH-2A
- * introduces some 32-bit instructions. Since there are no real
- * constraints on their use (and they can be mixed and matched), we need
- * to check the instruction encoding to work out if it's a true 32-bit
- * instruction or not.
- *
- * Presently, 32-bit opcodes have only slight variations in what the
- * actual encoding looks like in the first-half of the instruction, which
- * makes it fairly straightforward to differentiate from the 16-bit ones.
- *
- * First 16-bits of encoding Used by
- *
- * 0011nnnnmmmm0001 mov.b, mov.w, mov.l, fmov.d,
- * fmov.s, movu.b, movu.w
- *
- * 0011nnnn0iii1001 bclr.b, bld.b, bset.b, bst.b, band.b,
- * bandnot.b, bldnot.b, bor.b, bornot.b,
- * bxor.b
- *
- * 0000nnnniiii0000 movi20
- * 0000nnnniiii0001 movi20s
- */
-unsigned int instruction_size(unsigned int insn)
-{
- /* Look for the common cases */
- switch ((insn & 0xf00f)) {
- case 0x0000: /* movi20 */
- case 0x0001: /* movi20s */
- case 0x3001: /* 32-bit mov/fmov/movu variants */
- return 4;
- }
-
- /* And the special cases.. */
- switch ((insn & 0xf08f)) {
- case 0x3009: /* 32-bit b*.b bit operations */
- return 4;
- }
-
- return 2;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
deleted file mode 100644
index a6777e6fc8cdc2..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7203_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe3a9f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7203", sh7203_pfc_resources,
- ARRAY_SIZE(sh7203_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
deleted file mode 100644
index 7a103e16cf01b0..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7264_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe393f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7264", sh7264_pfc_resources,
- ARRAY_SIZE(sh7264_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
deleted file mode 100644
index 4da432ef1b40a9..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7269_pfc_resources[] = {
- [0] = {
- .start = 0xfffe3800,
- .end = 0xfffe391f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7269", sh7269_pfc_resources,
- ARRAY_SIZE(sh7269_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
deleted file mode 100644
index c66a3bc882bf9a..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh2a/probe.c
- *
- * CPU Subtype Probing for SH-2A.
- *
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- boot_cpu_data.family = CPU_FAMILY_SH2A;
-
- /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
- boot_cpu_data.flags |= CPU_HAS_OP32;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
- boot_cpu_data.type = CPU_SH7201;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203)
- boot_cpu_data.type = CPU_SH7203;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7263)
- boot_cpu_data.type = CPU_SH7263;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7264)
- boot_cpu_data.type = CPU_SH7264;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
- boot_cpu_data.type = CPU_SH7269;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
- boot_cpu_data.type = CPU_SH7206;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#elif defined(CONFIG_CPU_SUBTYPE_MXG)
- boot_cpu_data.type = CPU_MXG;
- boot_cpu_data.flags |= CPU_HAS_DSP;
-#endif
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * The icache is the same as the dcache as far as this setup is
- * concerned. The only real difference in hardware is that the icache
- * lacks the U bit that the dcache has, none of this has any bearing
- * on the cache info.
- */
- boot_cpu_data.icache = boot_cpu_data.dcache;
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
deleted file mode 100644
index cefa07924c16db..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Renesas MX-G (R8A03022BG) Setup
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
-
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
-
- SCIF0, SCIF1,
-
- MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
- MTU2_TGI3B, MTU2_TGI3C,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
- INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
- INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
- INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
- INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
- INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
- INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
-
- INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
- INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
- INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
- INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
-
- INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
- INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
- INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
-
- INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
- INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
- INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
-
- INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
- INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
-
- INTC_IRQ(MTU2_TGI3B, 244),
- INTC_IRQ(MTU2_TGI3C, 245),
-
- INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
- INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
- INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
-
- INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
- INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
- { 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
- { 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
- { 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
- { 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
- { 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
- { 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
- { 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
- { 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
- { 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
- { 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
- { 0xfffd9812, 0, 16, 4, /* IPR15 */
- { SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
- { 0xfffd9814, 0, 16, 4, /* IPR16 */
- { MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffd9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xff801000, 0x400),
- DEFINE_RES_IRQ_NAMED(228, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(234, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(240, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff804000, 0x100),
- DEFINE_RES_IRQ(220),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct platform_device *mxg_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-static int __init mxg_devices_setup(void)
-{
- return platform_add_devices(mxg_devices,
- ARRAY_SIZE(mxg_devices));
-}
-arch_initcall(mxg_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *mxg_early_devices[] __initdata = {
- &scif0_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(mxg_early_devices,
- ARRAY_SIZE(mxg_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
deleted file mode 100644
index 28f1bebf340565..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ /dev/null
@@ -1,418 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7201 setup
- *
- * Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- ADC_ADI,
-
- MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
- MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
-
- RTC, WDT,
-
- IIC30, IIC31, IIC32,
-
- DMAC0_DMINT0, DMAC1_DMINT1,
- DMAC2_DMINT2, DMAC3_DMINT3,
-
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-
- DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
- DMAC7_DMINT7,
-
- RCAN0, RCAN1,
-
- SSI0_SSII, SSI1_SSII,
-
- TMR0, TMR1,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(ADC_ADI, 92),
-
- INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
- INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
-
- INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
- INTC_IRQ(MTU20_VEF, 114),
-
- INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
- INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
-
- INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
- INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
-
- INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
- INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
-
- INTC_IRQ(MTU2_TCI3V, 136),
-
- INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
- INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
-
- INTC_IRQ(MTU2_TCI4V, 144),
-
- INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
- INTC_IRQ(MTU25_UVW, 150),
-
- INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
- INTC_IRQ(RTC, 154),
-
- INTC_IRQ(WDT, 156),
-
- INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
- INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
- INTC_IRQ(IIC30, 161),
-
- INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
- INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
- INTC_IRQ(IIC31, 168),
-
- INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
- INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
- INTC_IRQ(IIC32, 174),
-
- INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
- INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
-
- INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
- INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
- INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
- INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
- INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
- INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
- INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
- INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
- INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
- INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
- INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
- INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
- INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
- INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
- INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
- INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
-
- INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
- INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
- INTC_IRQ(DMAC7_DMINT7, 219),
-
- INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
- INTC_IRQ(RCAN0, 230),
- INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
-
- INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
- INTC_IRQ(RCAN1, 236),
- INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
-
- INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
-
- INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
- INTC_IRQ(TMR0, 248),
-
- INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
- INTC_IRQ(TMR1, 254),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe9420, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI, 0 } },
- { 0xfffe9800, 0, 16, 4, /* IPR06 */ { 0, MTU20_ABCD, MTU20_VEF, MTU21_AB } },
- { 0xfffe9802, 0, 16, 4, /* IPR07 */ { MTU21_VU, MTU22_AB, MTU22_VU, MTU23_ABCD } },
- { 0xfffe9804, 0, 16, 4, /* IPR08 */ { MTU2_TCI3V, MTU24_ABCD, MTU2_TCI4V, MTU25_UVW } },
-
- { 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
- { 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
- { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
- { 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
- { 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } },
- { 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
- { 0xfffe9812, 0, 16, 4, /* IPR15 */ { 0, RCAN0, RCAN1, 0 } },
- { 0xfffe9814, 0, 16, 4, /* IPR16 */ { SSI0_SSII, SSI1_SSII, TMR0, TMR1 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe9408, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(180),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(184),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(188),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(208),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff0800,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 152,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(108, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(116, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(124, "tgi1b"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7201_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &rtc_device,
- &mtu2_device,
-};
-
-static int __init sh7201_devices_setup(void)
-{
- return platform_add_devices(sh7201_devices,
- ARRAY_SIZE(sh7201_devices));
-}
-arch_initcall(sh7201_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7201_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-
-void __init plat_early_device_setup(void)
-{
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7201_early_devices,
- ARRAY_SIZE(sh7201_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
deleted file mode 100644
index 4839f3aaeb4c21..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 and SH7263 Setup
- *
- * Copyright (C) 2007 - 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- USB, LCDC, CMT0, CMT1, BSC, WDT,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
-
- ADC_ADI,
-
- IIC30, IIC31, IIC32, IIC33,
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- SSU0, SSU1,
-
- SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
-
- /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
- ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
- SRC, IEBI,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
- INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
- INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
- INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
- INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
- INTC_IRQ(MTU0_VEF, 150),
- INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
- INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
- INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
- INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
- INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
- INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
- INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
- INTC_IRQ(MTU2_TCI3V, 165),
- INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
- INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
- INTC_IRQ(MTU2_TCI4V, 170),
- INTC_IRQ(ADC_ADI, 171),
- INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
- INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
- INTC_IRQ(IIC30, 176),
- INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
- INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
- INTC_IRQ(IIC31, 181),
- INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
- INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
- INTC_IRQ(IIC32, 186),
- INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
- INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
- INTC_IRQ(IIC33, 191),
- INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
- INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
- INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
- INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
- INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
- INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
- INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
- INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
- INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
- INTC_IRQ(SSU0, 210),
- INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
- INTC_IRQ(SSU1, 213),
- INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
- INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
- INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
- INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
- INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
- INTC_IRQ(RTC, 233),
- INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
- INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
- INTC_IRQ(RCAN0, 238),
- INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
- INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
- INTC_IRQ(RCAN1, 243),
-
- /* SH7263-specific trash */
-#ifdef CONFIG_CPU_SUBTYPE_SH7263
- INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
- INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
- INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
-
- INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
- INTC_IRQ(SDHI, 230),
-
- INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
- INTC_IRQ(SRC, 246),
-
- INTC_IRQ(IEBI, 247),
-#endif
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB,
- MTU2_VU } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD,
- MTU2_TCI4V } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } },
-#ifdef CONFIG_CPU_SUBTYPE_SH7203
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, 0 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } },
-#else
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
- SSI3_SSII, ROMDEC } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } },
-#endif
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(192),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(196),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(200),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(204),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(142),
- DEFINE_RES_IRQ(143),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(146, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(153, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffff2000,
- .end = 0xffff2000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 231,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct platform_device *sh7203_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
-};
-
-static int __init sh7203_devices_setup(void)
-{
- return platform_add_devices(sh7203_devices,
- ARRAY_SIZE(sh7203_devices));
-}
-arch_initcall(sh7203_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7203_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7203_early_devices,
- ARRAY_SIZE(sh7203_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
deleted file mode 100644
index 68add5af4cc56e..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7206 Setup
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- ADC_ADI0, ADC_ADI1,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
-
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
- IIC3,
-
- CMT0, CMT1, BSC, WDT,
-
- MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
-
- POE2_OEI3,
-
- SCIF0, SCIF1, SCIF2, SCIF3,
-
- /* interrupt groups */
- PINT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
- INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
- INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
- INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
- INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
- INTC_IRQ(MTU0_VEF, 162),
- INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
- INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
- INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
- INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
- INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
- INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
- INTC_IRQ(MTU2_TCI3V, 184),
- INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
- INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
- INTC_IRQ(MTU2_TCI4V, 192),
- INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
- INTC_IRQ(MTU5, 198),
- INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
- INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
- INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
- INTC_IRQ(MTU2S_TCI3V, 208),
- INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
- INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
- INTC_IRQ(MTU2S_TCI4V, 216),
- INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
- INTC_IRQ(MTU5S, 222),
- INTC_IRQ(POE2_OEI3, 224),
- INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
- INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
- INTC_IRQ(IIC3, 232),
- INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
- INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
- INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
- INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
- INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
- INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
- INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
- INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU2_TCI3V } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V,
- MTU5, POE2_12 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V,
- MTU4S_ABCD, MTU2S_TCI4V } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(140),
- DEFINE_RES_IRQ(144),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(156, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(164, "tgi1a"),
- DEFINE_RES_IRQ_NAMED(180, "tgi2a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2s",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct platform_device *sh7206_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-static int __init sh7206_devices_setup(void)
-{
- return platform_add_devices(sh7206_devices,
- ARRAY_SIZE(sh7206_devices));
-}
-arch_initcall(sh7206_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7206_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &mtu2_device,
-};
-
-#define STBCR3 0xfffe0408
-#define STBCR4 0xfffe040c
-
-void __init plat_early_device_setup(void)
-{
- /* enable CMT clock */
- __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
-
- /* enable MTU2 clock */
- __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
-
- sh_early_platform_add_devices(sh7206_early_devices,
- ARRAY_SIZE(sh7206_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
deleted file mode 100644
index 8a1cb613dd2e04..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
+++ /dev/null
@@ -1,552 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC3, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- SIO_FIFO, RSPIC0, RSPIC1,
- RCAN0, RCAN1, IEBC, CD_ROMD,
- NFMC, SDHI, RTC,
- SRCC0, SRCC1, DCOMU, OFFI, IFEI,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
- INTC_IRQ(VDC3, 171), INTC_IRQ(VDC3, 172),
- INTC_IRQ(VDC3, 173), INTC_IRQ(VDC3, 174),
- INTC_IRQ(CMT0, 175), INTC_IRQ(CMT1, 176),
- INTC_IRQ(BSC, 177), INTC_IRQ(WDT, 178),
-
- INTC_IRQ(MTU0_ABCD, 179), INTC_IRQ(MTU0_ABCD, 180),
- INTC_IRQ(MTU0_ABCD, 181), INTC_IRQ(MTU0_ABCD, 182),
- INTC_IRQ(MTU0_VEF, 183),
- INTC_IRQ(MTU0_VEF, 184), INTC_IRQ(MTU0_VEF, 185),
- INTC_IRQ(MTU1_AB, 186), INTC_IRQ(MTU1_AB, 187),
- INTC_IRQ(MTU1_VU, 188), INTC_IRQ(MTU1_VU, 189),
- INTC_IRQ(MTU2_AB, 190), INTC_IRQ(MTU2_AB, 191),
- INTC_IRQ(MTU2_VU, 192), INTC_IRQ(MTU2_VU, 193),
- INTC_IRQ(MTU3_ABCD, 194), INTC_IRQ(MTU3_ABCD, 195),
- INTC_IRQ(MTU3_ABCD, 196), INTC_IRQ(MTU3_ABCD, 197),
- INTC_IRQ(MTU3_TCI3V, 198),
- INTC_IRQ(MTU4_ABCD, 199), INTC_IRQ(MTU4_ABCD, 200),
- INTC_IRQ(MTU4_ABCD, 201), INTC_IRQ(MTU4_ABCD, 202),
- INTC_IRQ(MTU4_TCI4V, 203),
-
- INTC_IRQ(PWMT1, 204), INTC_IRQ(PWMT2, 205),
-
- INTC_IRQ(ADC_ADI, 206),
-
- INTC_IRQ(SSIF0, 207), INTC_IRQ(SSIF0, 208),
- INTC_IRQ(SSIF0, 209),
- INTC_IRQ(SSII1, 210), INTC_IRQ(SSII1, 211),
- INTC_IRQ(SSII2, 212), INTC_IRQ(SSII2, 213),
- INTC_IRQ(SSII3, 214), INTC_IRQ(SSII3, 215),
-
- INTC_IRQ(RSPDIF, 216),
-
- INTC_IRQ(IIC30, 217), INTC_IRQ(IIC30, 218),
- INTC_IRQ(IIC30, 219), INTC_IRQ(IIC30, 220),
- INTC_IRQ(IIC30, 221),
- INTC_IRQ(IIC31, 222), INTC_IRQ(IIC31, 223),
- INTC_IRQ(IIC31, 224), INTC_IRQ(IIC31, 225),
- INTC_IRQ(IIC31, 226),
- INTC_IRQ(IIC32, 227), INTC_IRQ(IIC32, 228),
- INTC_IRQ(IIC32, 229), INTC_IRQ(IIC32, 230),
- INTC_IRQ(IIC32, 231),
-
- INTC_IRQ(SCIF0_BRI, 232), INTC_IRQ(SCIF0_ERI, 233),
- INTC_IRQ(SCIF0_RXI, 234), INTC_IRQ(SCIF0_TXI, 235),
- INTC_IRQ(SCIF1_BRI, 236), INTC_IRQ(SCIF1_ERI, 237),
- INTC_IRQ(SCIF1_RXI, 238), INTC_IRQ(SCIF1_TXI, 239),
- INTC_IRQ(SCIF2_BRI, 240), INTC_IRQ(SCIF2_ERI, 241),
- INTC_IRQ(SCIF2_RXI, 242), INTC_IRQ(SCIF2_TXI, 243),
- INTC_IRQ(SCIF3_BRI, 244), INTC_IRQ(SCIF3_ERI, 245),
- INTC_IRQ(SCIF3_RXI, 246), INTC_IRQ(SCIF3_TXI, 247),
- INTC_IRQ(SCIF4_BRI, 248), INTC_IRQ(SCIF4_ERI, 249),
- INTC_IRQ(SCIF4_RXI, 250), INTC_IRQ(SCIF4_TXI, 251),
- INTC_IRQ(SCIF5_BRI, 252), INTC_IRQ(SCIF5_ERI, 253),
- INTC_IRQ(SCIF5_RXI, 254), INTC_IRQ(SCIF5_TXI, 255),
- INTC_IRQ(SCIF6_BRI, 256), INTC_IRQ(SCIF6_ERI, 257),
- INTC_IRQ(SCIF6_RXI, 258), INTC_IRQ(SCIF6_TXI, 259),
- INTC_IRQ(SCIF7_BRI, 260), INTC_IRQ(SCIF7_ERI, 261),
- INTC_IRQ(SCIF7_RXI, 262), INTC_IRQ(SCIF7_TXI, 263),
-
- INTC_IRQ(SIO_FIFO, 264),
-
- INTC_IRQ(RSPIC0, 265), INTC_IRQ(RSPIC0, 266),
- INTC_IRQ(RSPIC0, 267),
- INTC_IRQ(RSPIC1, 268), INTC_IRQ(RSPIC1, 269),
- INTC_IRQ(RSPIC1, 270),
-
- INTC_IRQ(RCAN0, 271), INTC_IRQ(RCAN0, 272),
- INTC_IRQ(RCAN0, 273), INTC_IRQ(RCAN0, 274),
- INTC_IRQ(RCAN0, 275),
- INTC_IRQ(RCAN1, 276), INTC_IRQ(RCAN1, 277),
- INTC_IRQ(RCAN1, 278), INTC_IRQ(RCAN1, 279),
- INTC_IRQ(RCAN1, 280),
-
- INTC_IRQ(IEBC, 281),
-
- INTC_IRQ(CD_ROMD, 282), INTC_IRQ(CD_ROMD, 283),
- INTC_IRQ(CD_ROMD, 284), INTC_IRQ(CD_ROMD, 285),
- INTC_IRQ(CD_ROMD, 286), INTC_IRQ(CD_ROMD, 287),
-
- INTC_IRQ(NFMC, 288), INTC_IRQ(NFMC, 289),
- INTC_IRQ(NFMC, 290), INTC_IRQ(NFMC, 291),
-
- INTC_IRQ(SDHI, 292), INTC_IRQ(SDHI, 293),
- INTC_IRQ(SDHI, 294),
-
- INTC_IRQ(RTC, 296), INTC_IRQ(RTC, 297),
- INTC_IRQ(RTC, 298),
-
- INTC_IRQ(SRCC0, 299), INTC_IRQ(SRCC0, 300),
- INTC_IRQ(SRCC0, 301), INTC_IRQ(SRCC0, 302),
- INTC_IRQ(SRCC0, 303),
- INTC_IRQ(SRCC1, 304), INTC_IRQ(SRCC1, 305),
- INTC_IRQ(SRCC1, 306), INTC_IRQ(SRCC1, 307),
- INTC_IRQ(SRCC1, 308),
-
- INTC_IRQ(DCOMU, 310), INTC_IRQ(DCOMU, 311),
- INTC_IRQ(DCOMU, 312),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC3, CMT0, CMT1 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU1_AB, MTU1_VU,
- MTU2_AB, MTU2_VU } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU3_ABCD, MTU3_TCI3V,
- MTU4_ABCD, MTU4_TCI4V } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { PWMT1, PWMT2, ADC_ADI, 0 } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSIF0, SSII1, SSII2, SSII3 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { RSPDIF, IIC30, IIC31, IIC32 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { SIO_FIFO, 0, RSPIC0, RSPIC1, } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { RCAN0, RCAN1, IEBC, CD_ROMD } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { NFMC, SDHI, RTC, 0 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { SRCC0, SRCC1, 0, DCOMU } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7264", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffe8000, 0x100),
- DEFINE_RES_IRQ(233),
- DEFINE_RES_IRQ(234),
- DEFINE_RES_IRQ(235),
- DEFINE_RES_IRQ(232),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfffe8800, 0x100),
- DEFINE_RES_IRQ(237),
- DEFINE_RES_IRQ(238),
- DEFINE_RES_IRQ(239),
- DEFINE_RES_IRQ(236),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfffe9000, 0x100),
- DEFINE_RES_IRQ(241),
- DEFINE_RES_IRQ(242),
- DEFINE_RES_IRQ(243),
- DEFINE_RES_IRQ(240),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfffe9800, 0x100),
- DEFINE_RES_IRQ(245),
- DEFINE_RES_IRQ(246),
- DEFINE_RES_IRQ(247),
- DEFINE_RES_IRQ(244),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfffea000, 0x100),
- DEFINE_RES_IRQ(249),
- DEFINE_RES_IRQ(250),
- DEFINE_RES_IRQ(251),
- DEFINE_RES_IRQ(248),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xfffea800, 0x100),
- DEFINE_RES_IRQ(253),
- DEFINE_RES_IRQ(254),
- DEFINE_RES_IRQ(255),
- DEFINE_RES_IRQ(252),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xfffeb000, 0x100),
- DEFINE_RES_IRQ(257),
- DEFINE_RES_IRQ(258),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(256),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xfffeb800, 0x100),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(262),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(260),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(175),
- DEFINE_RES_IRQ(176),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(179, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(186, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 296,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static void usb_port_power(int port, int power)
-{
- __raw_writew(0x200 , 0xffffc0c2) ; /* Initialise UACS25 */
-}
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
- .port_power = usb_port_power,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xffffc000,
- .end = 0xffffc0e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7264_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7264_devices_setup(void)
-{
- return platform_add_devices(sh7264_devices,
- ARRAY_SIZE(sh7264_devices));
-}
-arch_initcall(sh7264_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7264_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7264_early_devices,
- ARRAY_SIZE(sh7264_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
deleted file mode 100644
index 8b1ef3028320c7..00000000000000
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
+++ /dev/null
@@ -1,568 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Setup
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
- DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- DMAC8, DMAC9, DMAC10, DMAC11, DMAC12, DMAC13, DMAC14, DMAC15,
- USB, VDC4, CMT0, CMT1, BSC, WDT,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V, MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2, ADC_ADI,
- SSIF0, SSII1, SSII2, SSII3, SSII4, SSII5,
- RSPDIF,
- IIC30, IIC31, IIC32, IIC33,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
- RCAN0, RCAN1, RCAN2,
- RSPIC0, RSPIC1,
- IEBC, CD_ROMD,
- NFMC,
- SDHI0, SDHI1,
- RTC,
- SRCC0, SRCC1, SRCC2,
-
- /* interrupt groups */
- PINT, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
- INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
- INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
- INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
-
- INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
- INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
- INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
- INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-
- INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
- INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
- INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
- INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
- INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
- INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
- INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
- INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
- INTC_IRQ(DMAC8, 140), INTC_IRQ(DMAC8, 141),
- INTC_IRQ(DMAC9, 144), INTC_IRQ(DMAC9, 145),
- INTC_IRQ(DMAC10, 148), INTC_IRQ(DMAC10, 149),
- INTC_IRQ(DMAC11, 152), INTC_IRQ(DMAC11, 153),
- INTC_IRQ(DMAC12, 156), INTC_IRQ(DMAC12, 157),
- INTC_IRQ(DMAC13, 160), INTC_IRQ(DMAC13, 161),
- INTC_IRQ(DMAC14, 164), INTC_IRQ(DMAC14, 165),
- INTC_IRQ(DMAC15, 168), INTC_IRQ(DMAC15, 169),
-
- INTC_IRQ(USB, 170),
-
- INTC_IRQ(VDC4, 171), INTC_IRQ(VDC4, 172),
- INTC_IRQ(VDC4, 173), INTC_IRQ(VDC4, 174),
- INTC_IRQ(VDC4, 175), INTC_IRQ(VDC4, 176),
- INTC_IRQ(VDC4, 177), INTC_IRQ(VDC4, 177),
-
- INTC_IRQ(CMT0, 188), INTC_IRQ(CMT1, 189),
-
- INTC_IRQ(BSC, 190), INTC_IRQ(WDT, 191),
-
- INTC_IRQ(MTU0_ABCD, 192), INTC_IRQ(MTU0_ABCD, 193),
- INTC_IRQ(MTU0_ABCD, 194), INTC_IRQ(MTU0_ABCD, 195),
- INTC_IRQ(MTU0_VEF, 196), INTC_IRQ(MTU0_VEF, 197),
- INTC_IRQ(MTU0_VEF, 198),
- INTC_IRQ(MTU1_AB, 199), INTC_IRQ(MTU1_AB, 200),
- INTC_IRQ(MTU1_VU, 201), INTC_IRQ(MTU1_VU, 202),
- INTC_IRQ(MTU2_AB, 203), INTC_IRQ(MTU2_AB, 204),
- INTC_IRQ(MTU2_VU, 205), INTC_IRQ(MTU2_VU, 206),
- INTC_IRQ(MTU3_ABCD, 207), INTC_IRQ(MTU3_ABCD, 208),
- INTC_IRQ(MTU3_ABCD, 209), INTC_IRQ(MTU3_ABCD, 210),
- INTC_IRQ(MTU3_TCI3V, 211),
- INTC_IRQ(MTU4_ABCD, 212), INTC_IRQ(MTU4_ABCD, 213),
- INTC_IRQ(MTU4_ABCD, 214), INTC_IRQ(MTU4_ABCD, 215),
- INTC_IRQ(MTU4_TCI4V, 216),
-
- INTC_IRQ(PWMT1, 217), INTC_IRQ(PWMT2, 218),
-
- INTC_IRQ(ADC_ADI, 223),
-
- INTC_IRQ(SSIF0, 224), INTC_IRQ(SSIF0, 225),
- INTC_IRQ(SSIF0, 226),
- INTC_IRQ(SSII1, 227), INTC_IRQ(SSII1, 228),
- INTC_IRQ(SSII2, 229), INTC_IRQ(SSII2, 230),
- INTC_IRQ(SSII3, 231), INTC_IRQ(SSII3, 232),
- INTC_IRQ(SSII4, 233), INTC_IRQ(SSII4, 234),
- INTC_IRQ(SSII5, 235), INTC_IRQ(SSII5, 236),
-
- INTC_IRQ(RSPDIF, 237),
-
- INTC_IRQ(IIC30, 238), INTC_IRQ(IIC30, 239),
- INTC_IRQ(IIC30, 240), INTC_IRQ(IIC30, 241),
- INTC_IRQ(IIC30, 242),
- INTC_IRQ(IIC31, 243), INTC_IRQ(IIC31, 244),
- INTC_IRQ(IIC31, 245), INTC_IRQ(IIC31, 246),
- INTC_IRQ(IIC31, 247),
- INTC_IRQ(IIC32, 248), INTC_IRQ(IIC32, 249),
- INTC_IRQ(IIC32, 250), INTC_IRQ(IIC32, 251),
- INTC_IRQ(IIC32, 252),
- INTC_IRQ(IIC33, 253), INTC_IRQ(IIC33, 254),
- INTC_IRQ(IIC33, 255), INTC_IRQ(IIC33, 256),
- INTC_IRQ(IIC33, 257),
-
- INTC_IRQ(SCIF0_BRI, 258), INTC_IRQ(SCIF0_ERI, 259),
- INTC_IRQ(SCIF0_RXI, 260), INTC_IRQ(SCIF0_TXI, 261),
- INTC_IRQ(SCIF1_BRI, 262), INTC_IRQ(SCIF1_ERI, 263),
- INTC_IRQ(SCIF1_RXI, 264), INTC_IRQ(SCIF1_TXI, 265),
- INTC_IRQ(SCIF2_BRI, 266), INTC_IRQ(SCIF2_ERI, 267),
- INTC_IRQ(SCIF2_RXI, 268), INTC_IRQ(SCIF2_TXI, 269),
- INTC_IRQ(SCIF3_BRI, 270), INTC_IRQ(SCIF3_ERI, 271),
- INTC_IRQ(SCIF3_RXI, 272), INTC_IRQ(SCIF3_TXI, 273),
- INTC_IRQ(SCIF4_BRI, 274), INTC_IRQ(SCIF4_ERI, 275),
- INTC_IRQ(SCIF4_RXI, 276), INTC_IRQ(SCIF4_TXI, 277),
- INTC_IRQ(SCIF5_BRI, 278), INTC_IRQ(SCIF5_ERI, 279),
- INTC_IRQ(SCIF5_RXI, 280), INTC_IRQ(SCIF5_TXI, 281),
- INTC_IRQ(SCIF6_BRI, 282), INTC_IRQ(SCIF6_ERI, 283),
- INTC_IRQ(SCIF6_RXI, 284), INTC_IRQ(SCIF6_TXI, 285),
- INTC_IRQ(SCIF7_BRI, 286), INTC_IRQ(SCIF7_ERI, 287),
- INTC_IRQ(SCIF7_RXI, 288), INTC_IRQ(SCIF7_TXI, 289),
-
- INTC_IRQ(RCAN0, 291), INTC_IRQ(RCAN0, 292),
- INTC_IRQ(RCAN0, 293), INTC_IRQ(RCAN0, 294),
- INTC_IRQ(RCAN0, 295),
- INTC_IRQ(RCAN1, 296), INTC_IRQ(RCAN1, 297),
- INTC_IRQ(RCAN1, 298), INTC_IRQ(RCAN1, 299),
- INTC_IRQ(RCAN1, 300),
- INTC_IRQ(RCAN2, 301), INTC_IRQ(RCAN2, 302),
- INTC_IRQ(RCAN2, 303), INTC_IRQ(RCAN2, 304),
- INTC_IRQ(RCAN2, 305),
-
- INTC_IRQ(RSPIC0, 306), INTC_IRQ(RSPIC0, 307),
- INTC_IRQ(RSPIC0, 308),
- INTC_IRQ(RSPIC1, 309), INTC_IRQ(RSPIC1, 310),
- INTC_IRQ(RSPIC1, 311),
-
- INTC_IRQ(IEBC, 318),
-
- INTC_IRQ(CD_ROMD, 319), INTC_IRQ(CD_ROMD, 320),
- INTC_IRQ(CD_ROMD, 321), INTC_IRQ(CD_ROMD, 322),
- INTC_IRQ(CD_ROMD, 323), INTC_IRQ(CD_ROMD, 324),
-
- INTC_IRQ(NFMC, 325), INTC_IRQ(NFMC, 326),
- INTC_IRQ(NFMC, 327), INTC_IRQ(NFMC, 328),
-
- INTC_IRQ(SDHI0, 332), INTC_IRQ(SDHI0, 333),
- INTC_IRQ(SDHI0, 334),
- INTC_IRQ(SDHI1, 335), INTC_IRQ(SDHI1, 336),
- INTC_IRQ(SDHI1, 337),
-
- INTC_IRQ(RTC, 338), INTC_IRQ(RTC, 339),
- INTC_IRQ(RTC, 340),
-
- INTC_IRQ(SRCC0, 341), INTC_IRQ(SRCC0, 342),
- INTC_IRQ(SRCC0, 343), INTC_IRQ(SRCC0, 344),
- INTC_IRQ(SRCC0, 345),
- INTC_IRQ(SRCC1, 346), INTC_IRQ(SRCC1, 347),
- INTC_IRQ(SRCC1, 348), INTC_IRQ(SRCC1, 349),
- INTC_IRQ(SRCC1, 350),
- INTC_IRQ(SRCC2, 351), INTC_IRQ(SRCC2, 352),
- INTC_IRQ(SRCC2, 353), INTC_IRQ(SRCC2, 354),
- INTC_IRQ(SRCC2, 355),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
- PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
- { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
- { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
- { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { DMAC8, DMAC9,
- DMAC10, DMAC11 } },
- { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { DMAC12, DMAC13,
- DMAC14, DMAC15 } },
- { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { USB, VDC4, VDC4, VDC4 } },
- { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { 0, 0, 0, 0 } },
- { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { CMT0, CMT1, BSC, WDT } },
- { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU0_ABCD, MTU0_VEF,
- MTU1_AB, MTU1_VU } },
- { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU3_TCI3V } },
- { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { MTU4_ABCD, MTU4_TCI4V,
- PWMT1, PWMT2 } },
- { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { 0, 0, 0, 0 } },
- { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { ADC_ADI, SSIF0, SSII1, SSII2 } },
- { 0xfffe0c18, 0, 16, 4, /* IPR18 */ { SSII3, SSII4, SSII5, RSPDIF} },
- { 0xfffe0c1a, 0, 16, 4, /* IPR19 */ { IIC30, IIC31, IIC32, IIC33 } },
- { 0xfffe0c1c, 0, 16, 4, /* IPR20 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
- { 0xfffe0c1e, 0, 16, 4, /* IPR21 */ { SCIF4, SCIF5, SCIF6, SCIF7 } },
- { 0xfffe0c20, 0, 16, 4, /* IPR22 */ { 0, RCAN0, RCAN1, RCAN2 } },
- { 0xfffe0c22, 0, 16, 4, /* IPR23 */ { RSPIC0, RSPIC1, 0, 0 } },
- { 0xfffe0c24, 0, 16, 4, /* IPR24 */ { IEBC, CD_ROMD, NFMC, 0 } },
- { 0xfffe0c26, 0, 16, 4, /* IPR25 */ { SDHI0, SDHI1, RTC, 0 } },
- { 0xfffe0c28, 0, 16, 4, /* IPR26 */ { SRCC0, SRCC1, SRCC2, 0 } },
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfffe0808, 0, 16, /* PINTER */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7269", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xe8007000, 0x100),
- DEFINE_RES_IRQ(259),
- DEFINE_RES_IRQ(260),
- DEFINE_RES_IRQ(261),
- DEFINE_RES_IRQ(258),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xe8007800, 0x100),
- DEFINE_RES_IRQ(263),
- DEFINE_RES_IRQ(264),
- DEFINE_RES_IRQ(265),
- DEFINE_RES_IRQ(262),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xe8008000, 0x100),
- DEFINE_RES_IRQ(267),
- DEFINE_RES_IRQ(268),
- DEFINE_RES_IRQ(269),
- DEFINE_RES_IRQ(266),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xe8008800, 0x100),
- DEFINE_RES_IRQ(271),
- DEFINE_RES_IRQ(272),
- DEFINE_RES_IRQ(273),
- DEFINE_RES_IRQ(270),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xe8009000, 0x100),
- DEFINE_RES_IRQ(275),
- DEFINE_RES_IRQ(276),
- DEFINE_RES_IRQ(277),
- DEFINE_RES_IRQ(274),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xe8009800, 0x100),
- DEFINE_RES_IRQ(279),
- DEFINE_RES_IRQ(280),
- DEFINE_RES_IRQ(281),
- DEFINE_RES_IRQ(278),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xe800a000, 0x100),
- DEFINE_RES_IRQ(283),
- DEFINE_RES_IRQ(284),
- DEFINE_RES_IRQ(285),
- DEFINE_RES_IRQ(282),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xe800a800, 0x100),
- DEFINE_RES_IRQ(287),
- DEFINE_RES_IRQ(288),
- DEFINE_RES_IRQ(289),
- DEFINE_RES_IRQ(286),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0xfffec000, 0x10),
- DEFINE_RES_IRQ(188),
- DEFINE_RES_IRQ(189),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-16",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct resource mtu2_resources[] = {
- DEFINE_RES_MEM(0xfffe4000, 0x400),
- DEFINE_RES_IRQ_NAMED(192, "tgi0a"),
- DEFINE_RES_IRQ_NAMED(203, "tgi1a"),
-};
-
-static struct platform_device mtu2_device = {
- .name = "sh-mtu2",
- .id = -1,
- .resource = mtu2_resources,
- .num_resources = ARRAY_SIZE(mtu2_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffe6000,
- .end = 0xfffe6000 + 0x30 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = 338,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* USB Host */
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
- .endian = 1,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .start = 0xe8010000,
- .end = 0xe80100e4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 170,
- .end = 170,
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct platform_device *sh7269_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
- &rtc_device,
- &r8a66597_usb_host_device,
-};
-
-static int __init sh7269_devices_setup(void)
-{
- return platform_add_devices(sh7269_devices,
- ARRAY_SIZE(sh7269_devices));
-}
-arch_initcall(sh7269_devices_setup);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct platform_device *sh7269_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &cmt_device,
- &mtu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7269_early_devices,
- ARRAY_SIZE(sh7269_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
deleted file mode 100644
index 1dcb43d93c8632..00000000000000
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-3 backends.
-#
-
-obj-y := ex.o probe.o entry.o setup-sh3.o
-
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o serial-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o serial-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o serial-sh7720.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o serial-sh7720.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SH3) := clock-sh3.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7720) := pinmux-sh7720.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
deleted file mode 100644
index d7765728cadf5a..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh3.c
- *
- * Generic SH-3 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh3_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh3_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh3_clk_ops[] = {
- &sh3_master_clk_ops,
- &sh3_module_clk_ops,
- &sh3_bus_clk_ops,
- &sh3_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh3_clk_ops))
- *ops = sh3_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
deleted file mode 100644
index 4947114af0901b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7705.c
- *
- * SH7705 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-/*
- * SH7705 uses the same divisors as the generic SH-3 case, it's just the
- * FRQCR layout that is a bit different..
- */
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7705_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readw(FRQCR) & 0x0003;
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7705_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7705_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7705_clk_ops[] = {
- &sh7705_master_clk_ops,
- &sh7705_module_clk_ops,
- &sh7705_bus_clk_ops,
- &sh7705_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7705_clk_ops))
- *ops = sh7705_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
deleted file mode 100644
index 17855022c118f5..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7706.c
- *
- * SH7706 support for the clock framework
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
- * Copyright (C) 2005 Andriy Skulysh
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
-
- return clk->parent->rate / stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7706_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7706_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7706_clk_ops[] = {
- &sh7706_master_clk_ops,
- &sh7706_module_clk_ops,
- &sh7706_bus_clk_ops,
- &sh7706_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7706_clk_ops))
- *ops = sh7706_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
deleted file mode 100644
index 54701bbf7caae7..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7709.c
- *
- * SH7709 support for the clock framework
- *
- * Copyright (C) 2005 Andriy Skulysh
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
-static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- clk->rate *= pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
-
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0080) ?
- ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
-
- return clk->parent->rate * stc_multipliers[idx];
-}
-
-static struct sh_clk_ops sh7709_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
-
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7709_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7709_clk_ops[] = {
- &sh7709_master_clk_ops,
- &sh7709_module_clk_ops,
- &sh7709_bus_clk_ops,
- &sh7709_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7709_clk_ops))
- *ops = sh7709_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
deleted file mode 100644
index e60d0bc19cbe96..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7710.c
- *
- * SH7710 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh7710_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
- return clk->parent->rate / md_table[idx];
-}
-
-static struct sh_clk_ops sh7710_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7710_clk_ops[] = {
- &sh7710_master_clk_ops,
- &sh7710_module_clk_ops,
- &sh7710_bus_clk_ops,
- &sh7710_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7710_clk_ops))
- *ops = sh7710_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
deleted file mode 100644
index 5af553f38d3a59..00000000000000
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ /dev/null
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7712.c
- *
- * SH7712 support for the clock framework
- *
- * Copyright (C) 2007 Andrew Murray <amurray@mpc-data.co.uk>
- *
- * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int multipliers[] = { 1, 2, 3 };
-static int divisors[] = { 1, 2, 3, 4, 6 };
-
-static void master_clk_init(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0300) >> 8;
-
- clk->rate *= multipliers[idx];
-}
-
-static struct sh_clk_ops sh7712_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = frqcr & 0x0007;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int frqcr = __raw_readw(FRQCR);
- int idx = (frqcr & 0x0030) >> 4;
-
- return clk->parent->rate / divisors[idx];
-}
-
-static struct sh_clk_ops sh7712_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7712_clk_ops[] = {
- &sh7712_master_clk_ops,
- &sh7712_module_clk_ops,
- &sh7712_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7712_clk_ops))
- *ops = sh7712_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
deleted file mode 100644
index e48b3dd996f58d..00000000000000
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ /dev/null
@@ -1,509 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/entry.S
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <cpu/mmu_context.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-/* Offsets to the stack */
-OFF_R0 = 0 /* Return value. New ABI also arg4 */
-OFF_R1 = 4 /* New ABI: arg5 */
-OFF_R2 = 8 /* New ABI: arg6 */
-OFF_R3 = 12 /* New ABI: syscall_nr */
-OFF_R4 = 16 /* New ABI: arg0 */
-OFF_R5 = 20 /* New ABI: arg1 */
-OFF_R6 = 24 /* New ABI: arg2 */
-OFF_R7 = 28 /* New ABI: arg3 */
-OFF_SP = (15*4)
-OFF_PC = (16*4)
-OFF_SR = (16*4+8)
-OFF_TRA = (16*4+6*4)
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-#define g_imask r6 /* r6_bank1 */
-#define k_g_imask r6_bank /* r6_bank1 */
-#define current r7 /* r7_bank1 */
-
-#include <asm/entry-macros.S>
-
-/*
- * Kernel mode register usage:
- * k0 scratch
- * k1 scratch
- * k2 scratch (Exception code)
- * k3 scratch (Return address)
- * k4 scratch
- * k5 reserved
- * k6 Global Interrupt Mask (0--15 << 4)
- * k7 CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-!
-! TLB Miss / Initial Page write exception handling
-! _and_
-! TLB hits, but the access violate the protection.
-! It can be valid access, such as stack grow and/or C-O-W.
-!
-!
-! Find the pmd/pte entry and loadtlb
-! If it's not found, cause address error (SEGV)
-!
-! Although this could be written in assembly language (and it'd be faster),
-! this first version depends *much* on C implementation.
-!
-
-#if defined(CONFIG_MMU)
- .align 2
-ENTRY(tlb_miss_load)
- bra call_handle_tlbmiss
- mov #0, r5
-
- .align 2
-ENTRY(tlb_miss_store)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_WRITE, r5
-
- .align 2
-ENTRY(initial_page_write)
- bra call_handle_tlbmiss
- mov #FAULT_CODE_INITIAL, r5
-
- .align 2
-ENTRY(tlb_protection_violation_load)
- bra call_do_page_fault
- mov #FAULT_CODE_PROT, r5
-
- .align 2
-ENTRY(tlb_protection_violation_store)
- bra call_do_page_fault
- mov #(FAULT_CODE_PROT | FAULT_CODE_WRITE), r5
-
-call_handle_tlbmiss:
- mov.l 1f, r0
- mov r5, r8
- mov.l @r0, r6
- mov.l 2f, r0
- sts pr, r10
- jsr @r0
- mov r15, r4
- !
- tst r0, r0
- bf/s 0f
- lds r10, pr
- rts
- nop
-0:
- mov r8, r5
-call_do_page_fault:
- mov.l 1f, r0
- mov.l @r0, r6
-
- mov.l 3f, r0
- mov.l 4f, r1
- mov r15, r4
- jmp @r0
- lds r1, pr
-
- .align 2
-1: .long MMU_TEA
-2: .long handle_tlbmiss
-3: .long do_page_fault
-4: .long ret_from_exception
-
- .align 2
-ENTRY(address_error_load)
- bra call_dae
- mov #0,r5 ! writeaccess = 0
-
- .align 2
-ENTRY(address_error_store)
- bra call_dae
- mov #1,r5 ! writeaccess = 1
-
- .align 2
-call_dae:
- mov.l 1f, r0
- mov.l @r0, r6 ! address
- mov.l 2f, r0
- jmp @r0
- mov r15, r4 ! regs
-
- .align 2
-1: .long MMU_TEA
-2: .long do_address_error
-#endif /* CONFIG_MMU */
-
-#if defined(CONFIG_SH_STANDARD_BIOS)
- /* Unwind the stack and jmp to the debug entry */
-ENTRY(sh_bios_handler)
- mov.l 1f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- mov k4, r15
- !
- mov.l 2f, k0
- mov.l @k0, k0
- jmp @k0
- ldc k3, ssr
- .align 2
-1: .long 0x300000f0
-2: .long gdb_vbr_vector
-#endif /* CONFIG_SH_STANDARD_BIOS */
-
-! restore_regs()
-! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
-! - switch bank
-! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
-! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
-! k2 returns original pr
-! k3 returns original sr
-! k4 returns original stack pointer
-! r8 passes SR bitmask, overwritten with restored data on return
-! r9 trashed
-! BL=0 on entry, on exit BL=1 (depending on r8).
-
-ENTRY(restore_regs)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- !
- stc sr, r9
- or r8, r9
- ldc r9, sr
- !
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, k4 ! original stack pointer
- ldc.l @r15+, spc
- mov.l @r15+, k2 ! original PR
- mov.l @r15+, k3 ! original SR
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
- rts
- add #4, r15 ! Skip syscall number
-
-restore_all:
- mov.l 7f, r8
- bsr restore_regs
- nop
-
- lds k2, pr ! restore pr
- !
- ! Calculate new SR value
- mov k3, k2 ! original SR value
- mov #0xfffffff0, k1
- extu.b k1, k1
- not k1, k1
- and k1, k2 ! Mask original SR value
- !
- mov k3, k0 ! Calculate IMASK-bits
- shlr2 k0
- and #0x3c, k0
- cmp/eq #0x3c, k0
- bt/s 6f
- shll2 k0
- mov g_imask, k0
- !
-6: or k0, k2 ! Set the IMASK-bits
- ldc k2, ssr
- !
- mov k4, r15
- rte
- nop
-
- .align 2
-5: .long 0x00001000 ! DSP
-7: .long 0x30000000
-
-! common exception handler
-#include "../../entry-common.S"
-
-! Exception Vector Base
-!
-! Should be aligned page boundary.
-!
- .balign 4096,0,4096
-ENTRY(vbr_base)
- .long 0
-!
-! 0x100: General exception vector
-!
- .balign 256,0,256
-general_exception:
- bra handle_exception
- sts pr, k3 ! save original pr value in k3
-
-! prepare_stack()
-! - roll back gRB
-! - switch to kernel stack
-! k0 returns original sp (after roll back)
-! k1 trashed
-! k2 trashed
-
-prepare_stack:
-#ifdef CONFIG_GUSA
- ! Check for roll back gRB (User and Kernel)
- mov r15, k0
- shll k0
- bf/s 1f
- shll k0
- bf/s 1f
- stc spc, k1
- stc r0_bank, k0
- cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0)
- bt/s 2f
- stc r1_bank, k1
-
- add #-2, k0
- add r15, k0
- ldc k0, spc ! PC = saved r0 + r15 - 2
-2: mov k1, r15 ! SP = r1
-1:
-#endif
- ! Switch to kernel stack if needed
- stc ssr, k0 ! Is it from kernel space?
- shll k0 ! Check MD bit (bit30) by shifting it into...
- shll k0 ! ...the T bit
- bt/s 1f ! It's a kernel to kernel transition.
- mov r15, k0 ! save original stack to k0
- /* User space to kernel */
- mov #(THREAD_SIZE >> 10), k1
- shll8 k1 ! k1 := THREAD_SIZE
- shll2 k1
- add current, k1
- mov k1, r15 ! change to kernel stack
- !
-1:
- rts
- nop
-
-!
-! 0x400: Instruction and Data TLB miss exception vector
-!
- .balign 1024,0,1024
-tlb_miss:
- sts pr, k3 ! save original pr value in k3
-
-handle_exception:
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 5f, k2 ! vector register address
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov.l @k2, k2 ! read out vector and keep in k2
-
-handle_exception_special:
- setup_frame_reg
-
- ! Setup return address and jump to exception handler
- mov.l 7f, r9 ! fetch return address
- stc r2_bank, r0 ! k2 (vector)
- mov.l 6f, r10
- shlr2 r0
- shlr r0
- mov.l @(r0, r10), r10
- jmp @r10
- lds r9, pr ! put return address in pr
-
- .align L1_CACHE_SHIFT
-
-! save_regs()
-! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
-! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
-! - switch bank
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k0 contains original stack pointer*
-! k1 trashed
-! k3 passes original pr*
-! k4 passes SR bitmask
-! BL=1 on entry, on exit BL=0.
-
-ENTRY(save_regs)
- mov #-1, r1
- mov.l k1, @-r15 ! set TRA (default: -1)
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- mov.l k3, @-r15 ! original pr in k3
- stc.l spc, @-r15
-
- mov.l k0, @-r15 ! original stack pointer in k0
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- mov.l 0f, k3 ! SR bits to set in k3
-
- ! fall-through
-
-! save_low_regs()
-! - modify SR for bank switch
-! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
-! k3 passes bits to set in SR
-! k4 passes bits to clear in SR
-
-ENTRY(save_low_regs)
- stc sr, r8
- or k3, r8
- and k4, r8
- ldc r8, sr
-
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
-!
-! 0x600: Interrupt / NMI vector
-!
- .balign 512,0,512
-ENTRY(handle_interrupt)
- sts pr, k3 ! save original pr value in k3
- mova exception_data, k0
-
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- PREF(k0)
-
- ! Save registers / Switch to bank 0
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- mov #-1, k2 ! default vector kept in k2
-
- setup_frame_reg
-
- stc sr, r0 ! get status register
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bf 9f
- TRACE_IRQS_OFF
-9:
-
- ! Setup return address and jump to do_IRQ
- mov.l 4f, r9 ! fetch return address
- lds r9, pr ! put return address in pr
- mov.l 2f, r4
- mov.l 3f, r9
- mov.l @r4, r4 ! pass INTEVT vector as arg0
-
- shlr2 r4
- shlr r4
- mov r4, r0 ! save vector->jmp table offset for later
-
- shlr2 r4 ! vector to IRQ# conversion
- add #-0x10, r4
-
- cmp/pz r4 ! is it a valid IRQ?
- bt 10f
-
- /*
- * We got here as a result of taking the INTEVT path for something
- * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
- * path and special case the event dispatch instead. This is the
- * expected path for the NMI (and any other brilliantly implemented
- * exception), which effectively wants regular exception dispatch
- * but is unfortunately reported through INTEVT rather than
- * EXPEVT. Grr.
- */
- mov.l 6f, r9
- mov.l @(r0, r9), r9
- jmp @r9
- mov r15, r8 ! trap handlers take saved regs in r8
-
-10:
- jmp @r9 ! Off to do_IRQ() we go.
- mov r15, r5 ! pass saved registers as arg1
-
-ENTRY(exception_none)
- rts
- nop
-
- .align L1_CACHE_SHIFT
-exception_data:
-0: .long 0x000080f0 ! FD=1, IMASK=15
-1: .long 0xcfffffff ! RB=0, BL=0
-2: .long INTEVT
-3: .long do_IRQ
-4: .long ret_from_irq
-5: .long EXPEVT
-6: .long exception_handling_table
-7: .long ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
deleted file mode 100644
index ee2113f4215cb3..00000000000000
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/ex.S
- *
- * The SH-3 and SH-4 exception vector table.
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_MMU)
-#define tlb_miss_load exception_error
-#define tlb_miss_store exception_error
-#define initial_page_write exception_error
-#define tlb_protection_violation_load exception_error
-#define tlb_protection_violation_store exception_error
-#define address_error_load exception_error
-#define address_error_store exception_error
-#endif
-
-#if !defined(CONFIG_SH_FPU)
-#define fpu_error_trap_handler exception_error
-#endif
-
-#if !defined(CONFIG_KGDB)
-#define kgdb_handle_exception exception_error
-#endif
-
- .align 2
- .data
-
-ENTRY(exception_handling_table)
- .long exception_error /* 000 */
- .long exception_error
- .long tlb_miss_load /* 040 */
- .long tlb_miss_store
- .long initial_page_write
- .long tlb_protection_violation_load
- .long tlb_protection_violation_store
- .long address_error_load
- .long address_error_store /* 100 */
- .long fpu_error_trap_handler /* 120 */
- .long exception_error /* 140 */
- .long system_call ! Unconditional Trap /* 160 */
- .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */
- .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/
- .long nmi_trap_handler /* 1C0 */ ! Allow trap to debugger
- .long breakpoint_trap_handler /* 1E0 */
-
- /*
- * Pad the remainder of the table out, exceptions residing in far
- * away offsets can be manually inserted in to their appropriate
- * location via set_exception_table_{evt,vec}().
- */
- .balign 4096,0,4096
diff --git a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c b/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
deleted file mode 100644
index 34015e608ee931..00000000000000
--- a/arch/sh/kernel/cpu/sh3/pinmux-sh7720.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7720_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7720", sh7720_pfc_resources,
- ARRAY_SIZE(sh7720_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
deleted file mode 100644
index 5e7ad591ab1651..00000000000000
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh3/probe.c
- *
- * CPU Subtype Probing for SH-3.
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-void cpu_probe(void)
-{
- unsigned long addr0, addr1, data0, data1, data2, data3;
-
- jump_to_uncached();
- /*
- * Check if the entry shadows or not.
- * When shadowed, it's 128-entry system.
- * Otherwise, it's 256-entry system.
- */
- addr0 = CACHE_OC_ADDRESS_ARRAY + (3 << 12);
- addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
-
- /* First, write back & invalidate */
- data0 = __raw_readl(addr0);
- __raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
- data1 = __raw_readl(addr1);
- __raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
-
- /* Next, check if there's shadow or not */
- data0 = __raw_readl(addr0);
- data0 ^= SH_CACHE_VALID;
- __raw_writel(data0, addr0);
- data1 = __raw_readl(addr1);
- data2 = data1 ^ SH_CACHE_VALID;
- __raw_writel(data2, addr1);
- data3 = __raw_readl(addr0);
-
- /* Lastly, invaliate them. */
- __raw_writel(data0&~SH_CACHE_VALID, addr0);
- __raw_writel(data2&~SH_CACHE_VALID, addr1);
-
- back_to_cached();
-
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.dcache.entry_shift = 4;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- boot_cpu_data.dcache.flags = 0;
-
- /*
- * 7709A/7729 has 16K cache (256-entry), while 7702 has only
- * 2K(direct) 7702 is not supported (yet)
- */
- if (data0 == data1 && data2 == data3) { /* Shadow */
- boot_cpu_data.dcache.way_incr = (1 << 11);
- boot_cpu_data.dcache.entry_mask = 0x7f0;
- boot_cpu_data.dcache.sets = 128;
- boot_cpu_data.type = CPU_SH7708;
-
- boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
- } else { /* 7709A or 7729 */
- boot_cpu_data.dcache.way_incr = (1 << 12);
- boot_cpu_data.dcache.entry_mask = 0xff0;
- boot_cpu_data.dcache.sets = 256;
- boot_cpu_data.type = CPU_SH7729;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7706)
- boot_cpu_data.type = CPU_SH7706;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
- boot_cpu_data.type = CPU_SH7710;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7712)
- boot_cpu_data.type = CPU_SH7712;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- boot_cpu_data.type = CPU_SH7720;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7721)
- boot_cpu_data.type = CPU_SH7721;
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- boot_cpu_data.type = CPU_SH7705;
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
- boot_cpu_data.dcache.way_incr = (1 << 13);
- boot_cpu_data.dcache.entry_mask = 0x1ff0;
- boot_cpu_data.dcache.sets = 512;
- __raw_writel(CCR_CACHE_32KB, CCR3_REG);
-#else
- __raw_writel(CCR_CACHE_16KB, CCR3_REG);
-#endif
-#endif
- }
-
- /*
- * SH-3 doesn't have separate caches
- */
- boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
- boot_cpu_data.icache = boot_cpu_data.dcache;
-
- boot_cpu_data.family = CPU_FAMILY_SH3;
-}
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/arch/sh/kernel/cpu/sh3/serial-sh770x.c
deleted file mode 100644
index dec027f233f22e..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh770x.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define SCPCR 0xA4000116
-#define SCPDR 0xA4000136
-
-static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- __raw_writew(data & 0x0fcf, SCPCR);
-
- if (!(cflag & CRTSCTS)) {
- /* We need to set SCPCR to enable RTS/CTS */
- data = __raw_readw(SCPCR);
- /* Clear out SCP7MD1,0, SCP4MD1,0,
- Set SCP6MD1,0 = {01} (output) */
- __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
-
- data = __raw_readb(SCPDR);
- /* Set /RTS2 (bit6) = 0 */
- __raw_writeb(data & 0xbf, SCPDR);
- }
-}
-
-struct plat_sci_port_ops sh770x_sci_port_ops = {
- .init_pins = sh770x_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/arch/sh/kernel/cpu/sh3/serial-sh7710.c
deleted file mode 100644
index ee04052e5bdde2..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7710.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-
-#define PACR 0xa4050100
-#define PBCR 0xa4050102
-
-static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- if (port->mapbase == 0xA4400000) {
- __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
- __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
- } else if (port->mapbase == 0xA4410000)
- __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
-}
-
-struct plat_sci_port_ops sh7710_sci_port_ops = {
- .init_pins = sh7710_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
deleted file mode 100644
index 75aaea49de4317..00000000000000
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <cpu/serial.h>
-#include <cpu/gpio.h>
-
-static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (cflag & CRTSCTS) {
- /* enable RTS/CTS */
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xfc03), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 9-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xfc03), PORT_PVCR);
- }
- } else {
- if (port->mapbase == 0xa4430000) { /* SCIF0 */
- /* Clear PTCR bit 5-2; enable only tx and rx */
- data = __raw_readw(PORT_PTCR);
- __raw_writew((data & 0xffc3), PORT_PTCR);
- } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
- /* Clear PVCR bit 5-2 */
- data = __raw_readw(PORT_PVCR);
- __raw_writew((data & 0xffc3), PORT_PVCR);
- }
- }
-}
-
-struct plat_sci_port_ops sh7720_sci_port_ops = {
- .init_pins = sh7720_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
deleted file mode 100644
index cf2a3f09fee443..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared SH3 Setup code
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-};
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static struct intc_vect vectors_irq45[] __initdata = {
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4000004, 0, 8, /* IRR0 */
- { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
- vectors_irq0123, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
- vectors_irq45, NULL, NULL,
- prio_registers, sense_registers, ack_registers);
-
-#define INTC_ICR1 0xa4000010UL
-#define INTC_ICR1_IRQLVL (1<<14)
-
-void __init plat_irq_setup_pins(int mode)
-{
- if (mode == IRQ_MODE_IRQ) {
- __raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
- register_intc_controller(&intc_desc_irq0123);
- return;
- }
- BUG();
-}
-
-void __init plat_irq_setup_sh3(void)
-{
- register_intc_controller(&intc_desc_irq45);
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
deleted file mode 100644
index 0544134b3f20c6..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7705 Setup
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
-
- DMAC, SCIF0, SCIF2, ADC_ADI, USB,
-
- TPU0, TPU1, TPU2, TPU3,
- TMU0, TMU1, TMU2,
-
- RTC, WDT, REF_RCMI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x960),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
- INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
- INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } },
-
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7705_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7705_devices_setup(void)
-{
- return platform_add_devices(sh7705_devices,
- ARRAY_SIZE(sh7705_devices));
-}
-arch_initcall(sh7705_devices_setup);
-
-static struct platform_device *sh7705_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7705_early_devices,
- ARRAY_SIZE(sh7705_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
deleted file mode 100644
index 4947f57748bc12..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
- *
- * Copyright (C) 2007 Magnus Damm
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on setup-sh7709.c
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/serial.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- PINT07, PINT815,
- DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
- LCDC, PCC0, PCC1,
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
- INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
- INTC_VECT(REF, 0x5a0),
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
- INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
- INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
- INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- INTC_VECT(LCDC, 0x9a0),
- INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0),
-#endif
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } },
-#endif
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCI,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffffe80, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh770x_sci_port_ops,
- .regtype = SCIx_SH3_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4000150, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct plat_sci_port scif2_platform_data = {
- .type = PORT_IRDA,
- .ops = &sh770x_sci_port_ops,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xa4000140, 0x10),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-#endif
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfffffe90, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh770x_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh770x_devices_setup(void)
-{
- return platform_add_devices(sh770x_devices,
- ARRAY_SIZE(sh770x_devices));
-}
-arch_initcall(sh770x_devices_setup);
-
-static struct platform_device *sh770x_early_devices[] __initdata = {
- &scif0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif1_device,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- &scif2_device,
-#endif
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh770x_early_devices,
- ARRAY_SIZE(sh770x_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- plat_irq_setup_sh3();
-#endif
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
deleted file mode 100644
index 3819107615794b..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH3 Setup code for SH7710, SH7712
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
- EDMAC0, EDMAC1, EDMAC2,
- SIOF0, SIOF1,
-
- TMU0, TMU1, TMU2,
- RTC, WDT, REF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
- INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
- INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
- INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
- INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
-#ifdef CONFIG_CPU_SUBTYPE_SH7710
- INTC_VECT(IPSEC, 0xbe0),
-#endif
- INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
- INTC_VECT(EDMAC2, 0xc40),
- INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
- INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
- INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
- INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
- { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
- { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
- { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
- { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
- { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4400000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4410000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7710_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &rtc_device,
-};
-
-static int __init sh7710_devices_setup(void)
-{
- return platform_add_devices(sh7710_devices,
- ARRAY_SIZE(sh7710_devices));
-}
-arch_initcall(sh7710_devices_setup);
-
-static struct platform_device *sh7710_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7710_early_devices,
- ARRAY_SIZE(sh7710_early_devices));
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
deleted file mode 100644
index 425d067dae9baf..00000000000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup code for SH7720, SH7721.
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- * Copyright (C) 2009 Paul Mundt
- *
- * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-#include <cpu/serial.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa413fec0,
- .end = 0xa413fec0 + 0x28 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_rtc_platform_info rtc_info = {
- .capabilities = RTC_CAP_4_DIGIT_YEAR,
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
- .dev = {
- .platform_data = &rtc_info,
- },
-};
-
-static struct plat_sci_port scif0_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xa4430000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .ops = &sh7720_sci_port_ops,
- .regtype = SCIx_SH7705_SCIF_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4438000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xA4428000,
- .end = 0xA44280FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa60),
- .end = evt2irq(0xa60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "sh_udc",
- .start = 0xA4420000,
- .end = 0xA44200FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "sh_udc",
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x1f,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x60),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xa412fe90, 0x28),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu-sh3",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7720_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7720_devices_setup(void)
-{
- return platform_add_devices(sh7720_devices,
- ARRAY_SIZE(sh7720_devices));
-}
-arch_initcall(sh7720_devices_setup);
-
-static struct platform_device *sh7720_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7720_early_devices,
- ARRAY_SIZE(sh7720_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- TMU0, TMU1, TMU2, RTC,
- WDT, REF_RCMI, SIM,
- IRQ0, IRQ1, IRQ2, IRQ3,
- USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
- DMAC1, LCDC, SSL,
- ADC, DMAC2, USBFI, CMT,
- SCIF0, SCIF1,
- PINT07, PINT815, TPU, IIC,
- SIOF0, SIOF1, MMC, PCC,
- USBHI, AFEIF,
- H_UDI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- /* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480),
- INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500),
- INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540),
- INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
- /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
- INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800),
- INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840),
- INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900),
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
- INTC_VECT(SSL, 0x980),
-#endif
- INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40),
- INTC_VECT(USBHI, 0xa60),
- INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
- INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
- INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
- INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
- INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80),
- INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0),
- INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00),
- INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0),
- INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
- INTC_VECT(AFEIF, 0xfe0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
- { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
- { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
- { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
- { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
- { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
- { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
- { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
- { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- plat_irq_setup_sh3();
-}
diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S
deleted file mode 100644
index dc111c4ccf2199..00000000000000
--- a/arch/sh/kernel/cpu/sh3/swsusp.S
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh3/swsusp.S
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
-! swsusp_arch_resume()
-! - copy restore_pblist pages
-! - restore registers from swsusp_arch_regs_cpu0
-
-ENTRY(swsusp_arch_resume)
- mov.l 1f, r15
- mov.l 2f, r4
- mov.l @r4, r4
-
-swsusp_copy_loop:
- mov r4, r0
- cmp/eq #0, r0
- bt swsusp_restore_regs
-
- mov.l @(PBE_ADDRESS, r4), r2
- mov.l @(PBE_ORIG_ADDRESS, r4), r5
-
- mov #(PAGE_SIZE >> 10), r3
- shll8 r3
- shlr2 r3 /* PAGE_SIZE / 16 */
-swsusp_copy_page:
- dt r3
- mov.l @r2+,r1 /* 16n+0 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+4 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+8 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+12 */
- mov.l r1,@r5
- bf/s swsusp_copy_page
- add #4,r5
-
- bra swsusp_copy_loop
- mov.l @(PBE_NEXT, r4), r4
-
-swsusp_restore_regs:
- ! BL=0: R7->R0 is bank0
- mov.l 3f, r8
- mov.l 4f, r5
- jsr @r5
- nop
-
- ! BL=1: R7->R0 is bank1
- lds k2, pr
- ldc k3, ssr
-
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- rte
- nop
- ! BL=0: R7->R0 is bank0
-
- .align 2
-1: .long swsusp_arch_regs_cpu0
-2: .long restore_pblist
-3: .long 0x20000000 ! RB=1
-4: .long restore_regs
-
-! swsusp_arch_suspend()
-! - prepare pc for resume, return from function without swsusp_save on resume
-! - save registers in swsusp_arch_regs_cpu0
-! - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
- sts pr, r0 ! save pr in r0
- mov r15, r2 ! save sp in r2
- mov r8, r5 ! save r8 in r5
- stc sr, r1
- ldc r1, ssr ! save sr in ssr
- mov.l 1f, r1
- ldc r1, spc ! setup pc value for resuming
- mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
- mov.l 6f, r3
- add r3, r15 ! save from top of structure
-
- ! BL=0: R7->R0 is bank0
- mov.l 2f, r3 ! get new SR value for bank1
- mov #0, r4
- mov.l 7f, r1
- jsr @r1 ! switch to bank1 and save bank1 r7->r0
- not r4, r4
-
- ! BL=1: R7->R0 is bank1
- stc r2_bank, k0 ! fetch old sp from r2_bank0
- mov.l 3f, k4 ! SR bits to clear in k4
- mov.l 8f, k1
- jsr @k1 ! switch to bank0 and save all regs
- stc r0_bank, k3 ! fetch old pr from r0_bank0
-
- ! BL=0: R7->R0 is bank0
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- stc ssr, r1
- ldc r1, sr ! restore old sr
- lds r0, pr ! restore old pr
- mov.l 4f, r0
- jmp @r0
- nop
-
-swsusp_call_save:
- mov r2, r15 ! restore old sp
- mov r5, r8 ! restore old r8
- lds r0, pr ! restore old pr
- rts
- mov #0, r0
-
- .align 2
-1: .long swsusp_call_save
-2: .long 0x20000000 ! RB=1
-3: .long 0xdfffffff ! RB=0
-4: .long swsusp_save
-5: .long swsusp_arch_regs_cpu0
-6: .long SWSUSP_ARCH_REGS_SIZE
-7: .long save_low_regs
-8: .long save_regs
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
deleted file mode 100644
index 00c16331e07e5b..00000000000000
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-obj-y := probe.o common.o
-common-y += $(addprefix ../sh3/, entry.o ex.o)
-
-obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
-obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
-obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
-
-# Perf events
-perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
-perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
-
-# Primary on-chip clocks (common)
-ifndef CONFIG_CPU_SH4A
-clock-$(CONFIG_CPU_SH4) := clock-sh4.o
-endif
-
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763cb256..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3 0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
- int divisor = clk->parent->rate / rate;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
- if (frqcr3_divisors[i] == divisor)
- return frqcr3_values[i];
-
- /* Safe fallback */
- return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
- .recalc = emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
- .recalc = femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
- int i;
-
- /*
- * For some reason, the shoc_clk seems to be set to some really
- * insane value at boot (values outside of the allowable frequency
- * range for instance). We deal with this by scaling it back down
- * to something sensible just in case.
- *
- * Start scaling from the high end down until we find something
- * that passes rate verification..
- */
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
- int divisor = frqcr3_divisors[i];
-
- if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
- break;
- }
-
- WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *bclk = clk_get(NULL, "bus_clk");
- unsigned long bclk_rate = clk_get_rate(bclk);
-
- clk_put(bclk);
-
- if (rate > bclk_rate)
- return 1;
- if (rate > 66000000)
- return 1;
-
- return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long frqcr3;
- unsigned int tmp;
-
- /* Make sure we have something sensible to switch to */
- if (shoc_clk_verify_rate(clk, rate) != 0)
- return -EINVAL;
-
- tmp = frqcr3_lookup(clk, rate);
-
- frqcr3 = __raw_readl(CPG2_FRQCR3);
- frqcr3 &= ~(0x0007 << 6);
- frqcr3 |= tmp << 6;
- __raw_writel(frqcr3, CPG2_FRQCR3);
-
- clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
- return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
- .init = shoc_clk_init,
- .recalc = shoc_clk_recalc,
- .set_rate = shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
- &sh4202_emi_clk,
- &sh4202_femi_clk,
- &sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
- CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
- CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
- struct clk *clkp = sh4202_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
deleted file mode 100644
index ee3c5537a9d81a..00000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4.c
- *
- * Generic SH-4 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-#define bfc_divisors ifc_divisors /* Same */
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
-}
-
-static struct sh_clk_ops sh4_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) & 0x0007);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh4_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh4_clk_ops[] = {
- &sh4_master_clk_ops,
- &sh4_module_clk_ops,
- &sh4_bus_clk_ops,
- &sh4_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh4_clk_ops))
- *ops = sh4_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
deleted file mode 100644
index 03ffd8cdf54244..00000000000000
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Save/restore floating point context for signal handlers.
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2006 ST Microelectronics Ltd. (denorm support)
- *
- * FIXME! These routines have not been tested for big endian case.
- */
-#include <linux/sched/signal.h>
-#include <linux/io.h>
-#include <cpu/fpu.h>
-#include <asm/processor.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-/* The PR (precision) bit in the FP Status Register must be clear when
- * an frchg instruction is executed, otherwise the instruction is undefined.
- * Executing frchg with PR set causes a trap on some SH4 implementations.
- */
-
-#define FPSCR_RCHG 0x00000000
-extern unsigned long long float64_div(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_div(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_mul(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_mul(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_add(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_add(unsigned long int a, unsigned long int b);
-extern unsigned long long float64_sub(unsigned long long a,
- unsigned long long b);
-extern unsigned long int float32_sub(unsigned long int a, unsigned long int b);
-extern unsigned long int float64_to_float32(unsigned long long a);
-static unsigned int fpu_exception_flags;
-
-/*
- * Save FPU registers onto task structure.
- */
-void save_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("sts.l fpul, @-%0\n\t"
- "sts.l fpscr, @-%0\n\t"
- "lds %2, fpscr\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "frchg\n\t"
- "fmov.s fr15, @-%0\n\t"
- "fmov.s fr14, @-%0\n\t"
- "fmov.s fr13, @-%0\n\t"
- "fmov.s fr12, @-%0\n\t"
- "fmov.s fr11, @-%0\n\t"
- "fmov.s fr10, @-%0\n\t"
- "fmov.s fr9, @-%0\n\t"
- "fmov.s fr8, @-%0\n\t"
- "fmov.s fr7, @-%0\n\t"
- "fmov.s fr6, @-%0\n\t"
- "fmov.s fr5, @-%0\n\t"
- "fmov.s fr4, @-%0\n\t"
- "fmov.s fr3, @-%0\n\t"
- "fmov.s fr2, @-%0\n\t"
- "fmov.s fr1, @-%0\n\t"
- "fmov.s fr0, @-%0\n\t"
- "lds %3, fpscr\n\t":"=r" (dummy)
- :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
- "r"(FPSCR_RCHG), "r"(FPSCR_INIT)
- :"memory");
-
- disable_fpu();
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
- unsigned long dummy;
-
- enable_fpu();
- asm volatile ("lds %2, fpscr\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "fmov.s @%0+, fr0\n\t"
- "fmov.s @%0+, fr1\n\t"
- "fmov.s @%0+, fr2\n\t"
- "fmov.s @%0+, fr3\n\t"
- "fmov.s @%0+, fr4\n\t"
- "fmov.s @%0+, fr5\n\t"
- "fmov.s @%0+, fr6\n\t"
- "fmov.s @%0+, fr7\n\t"
- "fmov.s @%0+, fr8\n\t"
- "fmov.s @%0+, fr9\n\t"
- "fmov.s @%0+, fr10\n\t"
- "fmov.s @%0+, fr11\n\t"
- "fmov.s @%0+, fr12\n\t"
- "fmov.s @%0+, fr13\n\t"
- "fmov.s @%0+, fr14\n\t"
- "fmov.s @%0+, fr15\n\t"
- "frchg\n\t"
- "lds.l @%0+, fpscr\n\t"
- "lds.l @%0+, fpul\n\t"
- :"=r" (dummy)
- :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
- :"memory");
- disable_fpu();
-}
-
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_hard structure
- * @n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n + 1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *)regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf
- };
-
- if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb))
- regs->pr = regs->pc + 4; /* bsr & jsr */
-
- if (nib[0] == 0xa || nib[0] == 0xb) {
- /* bra & bsr */
- nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) {
- /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) {
- /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1);
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) {
- /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *)(regs->pc + 2);
- } else if (insn == 0x000b) {
- /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *)(regs->pc + 2);
- } else {
- nextpc = regs->pc + instruction_size(insn);
- finsn = insn;
- }
-
- if ((finsn & 0xf1ff) == 0xf0ad) {
- /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
- /* FPU error */
- denormal_to_double(&tsk->thread.xstate->hardfpu,
- (finsn >> 8) & 0xf);
- else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00f) == 0xf002) {
- /* fmul */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- llx = float64_mul(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_mul(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf00e) == 0xf000) {
- /* fadd, fsub */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
- if ((finsn & 0xf00f) == 0xf000)
- llx = float64_add(llx, lly);
- else
- llx = float64_sub(llx, lly);
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- if ((finsn & 0xf00f) == 0xf000)
- hx = float32_add(hx, hy);
- else
- hx = float32_sub(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf003) == 0xf003) {
- /* fdiv */
- struct task_struct *tsk = current;
- int fpscr;
- int n, m, prec;
- unsigned int hx, hy;
-
- n = (finsn >> 8) & 0xf;
- m = (finsn >> 4) & 0xf;
- hx = tsk->thread.xstate->hardfpu.fp_regs[n];
- hy = tsk->thread.xstate->hardfpu.fp_regs[m];
- fpscr = tsk->thread.xstate->hardfpu.fpscr;
- prec = fpscr & FPSCR_DBL_PRECISION;
-
- if ((fpscr & FPSCR_CAUSE_ERROR)
- && (prec && ((hx & 0x7fffffff) < 0x00100000
- || (hy & 0x7fffffff) < 0x00100000))) {
- long long llx, lly;
-
- /* FPU error because of denormal (doubles) */
- llx = ((long long)hx << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
- lly = ((long long)hy << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- llx = float64_div(llx, lly);
-
- tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
- tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
- } else if ((fpscr & FPSCR_CAUSE_ERROR)
- && (!prec && ((hx & 0x7fffffff) < 0x00800000
- || (hy & 0x7fffffff) < 0x00800000))) {
- /* FPU error because of denormal (floats) */
- hx = float32_div(hx, hy);
- tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- } else if ((finsn & 0xf0bd) == 0xf0bd) {
- /* fcnvds - double to single precision convert */
- struct task_struct *tsk = current;
- int m;
- unsigned int hx;
-
- m = (finsn >> 8) & 0x7;
- hx = tsk->thread.xstate->hardfpu.fp_regs[m];
-
- if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
- && ((hx & 0x7fffffff) < 0x00100000)) {
- /* subnormal double to float conversion */
- long long llx;
-
- llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
- | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
-
- tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
- } else
- return 0;
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
-void float_raise(unsigned int flags)
-{
- fpu_exception_flags |= flags;
-}
-
-int float_rounding_mode(void)
-{
- struct task_struct *tsk = current;
- int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
- return roundingMode;
-}
-
-BUILD_TRAP_HANDLER(fpu_error)
-{
- struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
-
- __unlazy_fpu(tsk, regs);
- fpu_exception_flags = 0;
- if (ieee_fpe_handler(regs)) {
- tsk->thread.xstate->hardfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
- /* Set the FPSCR flag as well as cause bits - simply
- * replicate the cause */
- tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
- grab_fpu(regs);
- restore_fpu(tsk);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
- (fpu_exception_flags >> 2)) == 0) {
- return;
- }
- }
-
- force_sig(SIGFPE);
-}
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
deleted file mode 100644
index db5847bb733069..00000000000000
--- a/arch/sh/kernel/cpu/sh4/perf_event.c
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH7750-style performance counters
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PM_CR_BASE 0xff000084 /* 16-bit */
-#define PM_CTR_BASE 0xff100004 /* 32-bit */
-
-#define PMCR(n) (PM_CR_BASE + ((n) * 0x04))
-#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08))
-#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08))
-
-#define PMCR_PMM_MASK 0x0000003f
-
-#define PMCR_CLKF 0x00000100
-#define PMCR_PMCLR 0x00002000
-#define PMCR_PMST 0x00004000
-#define PMCR_PMEN 0x00008000
-
-static struct sh_pmu sh7750_pmu;
-
-/*
- * There are a number of events supported by each counter (33 in total).
- * Since we have 2 counters, each counter will take the event code as it
- * corresponds to the PMCR PMM setting. Each counter can be configured
- * independently.
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x01 Operand read access
- * 0x02 Operand write access
- * 0x03 UTLB miss
- * 0x04 Operand cache read miss
- * 0x05 Operand cache write miss
- * 0x06 Instruction fetch (w/ cache)
- * 0x07 Instruction TLB miss
- * 0x08 Instruction cache miss
- * 0x09 All operand accesses
- * 0x0a All instruction accesses
- * 0x0b OC RAM operand access
- * 0x0d On-chip I/O space access
- * 0x0e Operand access (r/w)
- * 0x0f Operand cache miss (r/w)
- * 0x10 Branch instruction
- * 0x11 Branch taken
- * 0x12 BSR/BSRF/JSR
- * 0x13 Instruction execution
- * 0x14 Instruction execution in parallel
- * 0x15 FPU Instruction execution
- * 0x16 Interrupt
- * 0x17 NMI
- * 0x18 trapa instruction execution
- * 0x19 UBCA match
- * 0x1a UBCB match
- * 0x21 Instruction cache fill
- * 0x22 Operand cache fill
- * 0x23 Elapsed time
- * 0x24 Pipeline freeze by I-cache miss
- * 0x25 Pipeline freeze by D-cache miss
- * 0x27 Pipeline freeze by branch instruction
- * 0x28 Pipeline freeze by CPU register
- * 0x29 Pipeline freeze by FPU
- */
-
-static const int sh7750_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0023,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x000a,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0006, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x0008, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0010,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh7750_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0001,
- [ C(RESULT_MISS) ] = 0x0004,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0002,
- [ C(RESULT_MISS) ] = 0x0005,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0006,
- [ C(RESULT_MISS) ] = 0x0008,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0003,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x0007,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh7750_event_map(int event)
-{
- return sh7750_general_events[event];
-}
-
-static u64 sh7750_pmu_read(int idx)
-{
- return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
- __raw_readl(PMCTRL(idx));
-}
-
-static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readw(PMCR(idx));
- tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
- __raw_writew(tmp, PMCR(idx));
-}
-
-static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- __raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
- __raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
-}
-
-static void sh7750_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
-}
-
-static void sh7750_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh7750_pmu.num_events; i++)
- __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
-}
-
-static struct sh_pmu sh7750_pmu = {
- .name = "sh7750",
- .num_events = 2,
- .event_map = sh7750_event_map,
- .max_events = ARRAY_SIZE(sh7750_general_events),
- .raw_event_mask = PMCR_PMM_MASK,
- .cache_events = &sh7750_cache_events,
- .read = sh7750_pmu_read,
- .disable = sh7750_pmu_disable,
- .enable = sh7750_pmu_enable,
- .disable_all = sh7750_pmu_disable_all,
- .enable_all = sh7750_pmu_enable_all,
-};
-
-static int __init sh7750_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh7750_pmu);
-}
-early_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
deleted file mode 100644
index ef4dd6295263dd..00000000000000
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ /dev/null
@@ -1,260 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/probe.c
- *
- * CPU Subtype Probing for SH-4.
- *
- * Copyright (C) 2001 - 2007 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-void cpu_probe(void)
-{
- unsigned long pvr, prr, cvr;
- unsigned long size;
-
- static unsigned long sizes[16] = {
- [1] = (1 << 12),
- [2] = (1 << 13),
- [4] = (1 << 14),
- [8] = (1 << 15),
- [9] = (1 << 16)
- };
-
- pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
- prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
- cvr = (__raw_readl(CCN_CVR));
-
- /*
- * Setup some sane SH-4 defaults for the icache
- */
- boot_cpu_data.icache.way_incr = (1 << 13);
- boot_cpu_data.icache.entry_shift = 5;
- boot_cpu_data.icache.sets = 256;
- boot_cpu_data.icache.ways = 1;
- boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
-
- /*
- * And again for the dcache ..
- */
- boot_cpu_data.dcache.way_incr = (1 << 14);
- boot_cpu_data.dcache.entry_shift = 5;
- boot_cpu_data.dcache.sets = 512;
- boot_cpu_data.dcache.ways = 1;
- boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
-
- /* We don't know the chip cut */
- boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
-
- /*
- * Setup some generic flags we can probe on SH-4A parts
- */
- if (((pvr >> 16) & 0xff) == 0x10) {
- boot_cpu_data.family = CPU_FAMILY_SH4A;
-
- if ((cvr & 0x10000000) == 0) {
- boot_cpu_data.flags |= CPU_HAS_DSP;
- boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
- }
-
- boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
- boot_cpu_data.cut_major = pvr & 0x7f;
-
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- } else {
- /* And some SH-4 defaults.. */
- boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
- boot_cpu_data.family = CPU_FAMILY_SH4;
- }
-
- /* FPU detection works for almost everyone */
- if ((cvr & 0x20000000))
- boot_cpu_data.flags |= CPU_HAS_FPU;
-
- /* Mask off the upper chip ID */
- pvr &= 0xffff;
-
- /*
- * Probe the underlying processor version/revision and
- * adjust cpu_data setup accordingly.
- */
- switch (pvr) {
- case 0x205:
- boot_cpu_data.type = CPU_SH7750;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x206:
- boot_cpu_data.type = CPU_SH7750S;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
- CPU_HAS_PERF_COUNTER;
- break;
- case 0x1100:
- boot_cpu_data.type = CPU_SH7751;
- break;
- case 0x2001:
- case 0x2004:
- boot_cpu_data.type = CPU_SH7770;
- break;
- case 0x2006:
- case 0x200A:
- if (prr == 0x61)
- boot_cpu_data.type = CPU_SH7781;
- else if (prr == 0xa1)
- boot_cpu_data.type = CPU_SH7763;
- else
- boot_cpu_data.type = CPU_SH7780;
-
- break;
- case 0x3000:
- case 0x3003:
- case 0x3009:
- boot_cpu_data.type = CPU_SH7343;
- break;
- case 0x3004:
- case 0x3007:
- boot_cpu_data.type = CPU_SH7785;
- break;
- case 0x4004:
- case 0x4005:
- boot_cpu_data.type = CPU_SH7786;
- boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
- break;
- case 0x3008:
- switch (prr) {
- case 0x50:
- case 0x51:
- boot_cpu_data.type = CPU_SH7723;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x70:
- boot_cpu_data.type = CPU_SH7366;
- break;
- case 0xa0:
- case 0xa1:
- boot_cpu_data.type = CPU_SH7722;
- break;
- }
- break;
- case 0x300b:
- switch (prr) {
- case 0x20:
- boot_cpu_data.type = CPU_SH7724;
- boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
- break;
- case 0x10:
- case 0x11:
- boot_cpu_data.type = CPU_SH7757;
- break;
- case 0xd0:
- case 0x40: /* yon-ten-go */
- boot_cpu_data.type = CPU_SH7372;
- break;
- case 0xE0: /* 0x4E0 */
- boot_cpu_data.type = CPU_SH7734; /* SH7733/SH7734 */
- break;
-
- }
- break;
- case 0x4000: /* 1st cut */
- case 0x4001: /* 2nd cut */
- boot_cpu_data.type = CPU_SHX3;
- break;
- case 0x700:
- boot_cpu_data.type = CPU_SH4_501;
- boot_cpu_data.flags &= ~CPU_HAS_FPU;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x600:
- boot_cpu_data.type = CPU_SH4_202;
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
- break;
- case 0x500 ... 0x501:
- switch (prr) {
- case 0x10:
- boot_cpu_data.type = CPU_SH7750R;
- break;
- case 0x11:
- boot_cpu_data.type = CPU_SH7751R;
- break;
- case 0x50 ... 0x5f:
- boot_cpu_data.type = CPU_SH7760;
- break;
- }
-
- boot_cpu_data.icache.ways = 2;
- boot_cpu_data.dcache.ways = 2;
-
- break;
- }
-
- /*
- * On anything that's not a direct-mapped cache, look to the CVR
- * for I/D-cache specifics.
- */
- if (boot_cpu_data.icache.ways > 1) {
- size = sizes[(cvr >> 20) & 0xf];
- boot_cpu_data.icache.way_incr = (size >> 1);
- boot_cpu_data.icache.sets = (size >> 6);
-
- }
-
- /* And the rest of the D-cache */
- if (boot_cpu_data.dcache.ways > 1) {
- size = sizes[(cvr >> 16) & 0xf];
- boot_cpu_data.dcache.way_incr = (size >> 1);
- boot_cpu_data.dcache.sets = (size >> 6);
- }
-
- /*
- * SH-4A's have an optional PIPT L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- /*
- * Verify that it really has something hooked up, this
- * is the safety net for CPUs that have optional L2
- * support yet do not implement it.
- */
- if ((cvr & 0xf) == 0)
- boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
- else {
- /*
- * Silicon and specifications have clearly never
- * met..
- */
- cvr ^= 0xf;
-
- /*
- * Size calculation is much more sensible
- * than it is for the L1.
- *
- * Sizes are 128KB, 256KB, 512KB, and 1MB.
- */
- size = (cvr & 0xf) << 17;
-
- boot_cpu_data.scache.way_incr = (1 << 16);
- boot_cpu_data.scache.entry_shift = 5;
- boot_cpu_data.scache.ways = 4;
- boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
-
- boot_cpu_data.scache.entry_mask =
- (boot_cpu_data.scache.way_incr -
- boot_cpu_data.scache.linesz);
-
- boot_cpu_data.scache.sets = size /
- (boot_cpu_data.scache.linesz *
- boot_cpu_data.scache.ways);
-
- boot_cpu_data.scache.way_size =
- (boot_cpu_data.scache.sets *
- boot_cpu_data.scache.linesz);
- }
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index e6737f3d0df252..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
- return platform_add_devices(sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh4202_early_devices,
- ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
deleted file mode 100644
index 19c8f1d69071c3..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2006 Jamie Lenehan
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <generated/machtypes.h>
-#include <asm/platform_early.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffc80000,
- .end = 0xffc80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct plat_sci_port sci_platform_data = {
- .type = PORT_SCI,
-};
-
-static struct resource sci_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = sci_resources,
- .num_resources = ARRAY_SIZE(sci_resources),
- .dev = {
- .platform_data = &sci_platform_data,
- },
-};
-
-static struct plat_sci_port scif_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif_resources,
- .num_resources = ARRAY_SIZE(scif_resources),
- .dev = {
- .platform_data = &scif_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xfe100000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-#endif
-
-static struct platform_device *sh7750_devices[] __initdata = {
- &rtc_device,
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-static int __init sh7750_devices_setup(void)
-{
- if (mach_is_rts7751r2d()) {
- platform_device_register(&scif_device);
- } else {
- platform_device_register(&sci_device);
- platform_device_register(&scif_device);
- }
-
- return platform_add_devices(sh7750_devices,
- ARRAY_SIZE(sh7750_devices));
-}
-arch_initcall(sh7750_devices_setup);
-
-static struct platform_device *sh7750_early_devices[] __initdata = {
- &tmu0_device,
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
- &tmu1_device,
-#endif
-};
-
-void __init plat_early_device_setup(void)
-{
- struct platform_device *dev[1];
-
- if (mach_is_rts7751r2d()) {
- scif_platform_data.scscr |= SCSCR_CKE1;
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- } else {
- dev[0] = &sci_device;
- sh_early_platform_add_devices(dev, 1);
- dev[0] = &scif_device;
- sh_early_platform_add_devices(dev, 1);
- }
-
- sh_early_platform_add_devices(sh7750_early_devices,
- ARRAY_SIZE(sh7750_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, GPIOI, DMAC,
- PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
- TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
-
- /* interrupt groups */
- PCIC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
- INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
- TMU4, TMU3,
- PCIC1, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-static struct intc_vect vectors_dma4[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
- vectors_dma4, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R and SH7751R both have 8-channel DMA controllers */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_dma8[] __initdata = {
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
- vectors_dma8, NULL,
- NULL, prio_registers, NULL);
-#endif
-
-/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_tmu34[] __initdata = {
- INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, TMU4, TMU3,
- PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2,
- PCIC1_PCIDMA3, PCIC0_PCISERR } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34",
- vectors_tmu34, NULL,
- mask_registers, prio_registers, NULL);
-#endif
-
-/* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-/* SH7751 and SH7751R both have PCI */
-#if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_pci[] __initdata = {
- INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0),
- INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0),
- INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60),
- INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20),
-};
-
-static struct intc_group groups_pci[] __initdata = {
- INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
- PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3),
-};
-
-static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci,
- mask_registers, prio_registers, NULL);
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091)
-void __init plat_irq_setup(void)
-{
- /*
- * same vectors for SH7750, SH7750S and SH7091 except for IRLM,
- * see below..
- */
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7750R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma4);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R)
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
- register_intc_controller(&intc_desc_dma8);
- register_intc_controller(&intc_desc_tmu34);
- register_intc_controller(&intc_desc_pci);
-}
-#endif
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091)
- BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */
- return;
-#endif
-
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
deleted file mode 100644
index 14212f5d803cd4..00000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ /dev/null
@@ -1,297 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3,
- HUDI, GPIOI, DMAC,
- IRQ4, IRQ5, IRQ6, IRQ7,
- HCAN20, HCAN21,
- SSI0, SSI1,
- HAC0, HAC1,
- I2C0, I2C1,
- USB, LCDC,
- DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI,
- MMCIF0, MMCIF1, MMCIF2, MMCIF3,
- MFI, ADC, CMT,
- TMU0, TMU1, TMU2,
- WDT, REF,
-
- /* interrupt groups */
- DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
- INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
- INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
- INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960),
- INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0),
- INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0),
- INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20),
- INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0),
- INTC_VECT(DMABRG2, 0xac0),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
- INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20),
- INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60),
- INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0),
- INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0),
- INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20),
- INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60),
- INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20),
- INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60),
- INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
- INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
- { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21,
- SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC,
- 0, DMABRG0, DMABRG1, DMABRG2,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } },
- { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- HSPI, MMCIF0, MMCIF1, MMCIF2,
- MMCIF3, 0, 0, 0, 0, 0, 0, 0,
- 0, MFI, 0, 0, 0, 0, ADC, CMT, } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1,
- HAC0, HAC1, I2C0, I2C1 } },
- { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0,
- SCIF1, SCIF2, SIM, HSPI } },
- { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0,
- MFI, 0, ADC, CMT } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
- mask_registers, prio_registers, NULL);
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfe600000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .type = PORT_SCIF,
- .scscr = SCSCR_REIE,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xfe610000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb00)),
- DEFINE_RES_IRQ(evt2irq(0xb20)),
- DEFINE_RES_IRQ(evt2irq(0xb60)),
- DEFINE_RES_IRQ(evt2irq(0xb40)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe620000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
- DEFINE_RES_IRQ(evt2irq(0xba0)),
- DEFINE_RES_IRQ(evt2irq(0xbe0)),
- DEFINE_RES_IRQ(evt2irq(0xbc0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- /*
- * This is actually a SIM card module serial port, based on an SCI with
- * additional registers. The sh-sci driver doesn't support the SIM port
- * type, declare it as a SCI. Don't declare the additional registers in
- * the memory resource or the driver will compute an incorrect regshift
- * value.
- */
- .type = PORT_SCI,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe480000, 0x10),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-
-static struct platform_device *sh7760_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-static int __init sh7760_devices_setup(void)
-{
- return platform_add_devices(sh7760_devices,
- ARRAY_SIZE(sh7760_devices));
-}
-arch_initcall(sh7760_devices_setup);
-
-static struct platform_device *sh7760_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7760_early_devices,
- ARRAY_SIZE(sh7760_early_devices));
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1 << 7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irq);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
deleted file mode 100644
index 42edf2e54e8543..00000000000000
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ /dev/null
@@ -1,930 +0,0 @@
-/*
- * Floating point emulation support for subnormalised numbers on SH4
- * architecture This file is derived from the SoftFloat IEC/IEEE
- * Floating-point Arithmetic Package, Release 2 the original license of
- * which is reproduced below.
- *
- * ========================================================================
- *
- * This C source file is part of the SoftFloat IEC/IEEE Floating-point
- * Arithmetic Package, Release 2.
- *
- * Written by John R. Hauser. This work was made possible in part by the
- * International Computer Science Institute, located at Suite 600, 1947 Center
- * Street, Berkeley, California 94704. Funding was partially provided by the
- * National Science Foundation under grant MIP-9311980. The original version
- * of this code was written as part of a project to build a fixed-point vector
- * processor in collaboration with the University of California at Berkeley,
- * overseen by Profs. Nelson Morgan and John Wawrzynek. More information
- * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
- * arithmetic/softfloat.html'.
- *
- * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort
- * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
- * TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO
- * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
- * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
- *
- * Derivative works are acceptable, even for commercial purposes, so long as
- * (1) they include prominent notice that the work is derivative, and (2) they
- * include prominent notice akin to these three paragraphs for those parts of
- * this code that are retained.
- *
- * ========================================================================
- *
- * SH4 modifications by Ismail Dhaoui <ismail.dhaoui@st.com>
- * and Kamel Khelifi <kamel.khelifi@st.com>
- */
-#include <linux/kernel.h>
-#include <cpu/fpu.h>
-#include <asm/div64.h>
-
-#define LIT64( a ) a##LL
-
-typedef char flag;
-typedef unsigned char uint8;
-typedef signed char int8;
-typedef int uint16;
-typedef int int16;
-typedef unsigned int uint32;
-typedef signed int int32;
-
-typedef unsigned long long int bits64;
-typedef signed long long int sbits64;
-
-typedef unsigned char bits8;
-typedef signed char sbits8;
-typedef unsigned short int bits16;
-typedef signed short int sbits16;
-typedef unsigned int bits32;
-typedef signed int sbits32;
-
-typedef unsigned long long int uint64;
-typedef signed long long int int64;
-
-typedef unsigned long int float32;
-typedef unsigned long long float64;
-
-extern void float_raise(unsigned int flags); /* in fpu.c */
-extern int float_rounding_mode(void); /* in fpu.c */
-
-bits64 extractFloat64Frac(float64 a);
-flag extractFloat64Sign(float64 a);
-int16 extractFloat64Exp(float64 a);
-int16 extractFloat32Exp(float32 a);
-flag extractFloat32Sign(float32 a);
-bits32 extractFloat32Frac(float32 a);
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig);
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr);
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig);
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr);
-float64 float64_sub(float64 a, float64 b);
-float32 float32_sub(float32 a, float32 b);
-float32 float32_add(float32 a, float32 b);
-float64 float64_add(float64 a, float64 b);
-float64 float64_div(float64 a, float64 b);
-float32 float32_div(float32 a, float32 b);
-float32 float32_mul(float32 a, float32 b);
-float64 float64_mul(float64 a, float64 b);
-float32 float64_to_float32(float64 a);
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr);
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr);
-
-static int8 countLeadingZeros32(bits32 a);
-static int8 countLeadingZeros64(bits64 a);
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp,
- bits64 zSig);
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign);
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign);
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig);
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp,
- bits32 zSig);
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig);
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign);
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign);
-static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr,
- bits64 * zSigPtr);
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b);
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr);
-
-bits64 extractFloat64Frac(float64 a)
-{
- return a & LIT64(0x000FFFFFFFFFFFFF);
-}
-
-flag extractFloat64Sign(float64 a)
-{
- return a >> 63;
-}
-
-int16 extractFloat64Exp(float64 a)
-{
- return (a >> 52) & 0x7FF;
-}
-
-int16 extractFloat32Exp(float32 a)
-{
- return (a >> 23) & 0xFF;
-}
-
-flag extractFloat32Sign(float32 a)
-{
- return a >> 31;
-}
-
-bits32 extractFloat32Frac(float32 a)
-{
- return a & 0x007FFFFF;
-}
-
-float64 packFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig;
-}
-
-void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr)
-{
- bits64 z;
-
- if (count == 0) {
- z = a;
- } else if (count < 64) {
- z = (a >> count) | ((a << ((-count) & 63)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static int8 countLeadingZeros32(bits32 a)
-{
- static const int8 countLeadingZerosHigh[] = {
- 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
- };
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < 0x10000) {
- shiftCount += 16;
- a <<= 16;
- }
- if (a < 0x1000000) {
- shiftCount += 8;
- a <<= 8;
- }
- shiftCount += countLeadingZerosHigh[a >> 24];
- return shiftCount;
-
-}
-
-static int8 countLeadingZeros64(bits64 a)
-{
- int8 shiftCount;
-
- shiftCount = 0;
- if (a < ((bits64) 1) << 32) {
- shiftCount += 32;
- } else {
- a >>= 32;
- }
- shiftCount += countLeadingZeros32(a);
- return shiftCount;
-
-}
-
-static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(zSig) - 1;
- return roundAndPackFloat64(zSign, zExp - shiftCount,
- zSig << shiftCount);
-
-}
-
-static float64 subFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 10;
- bSig <<= 10;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0x7FF) {
- return packFloat64(zSign ^ 1, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- bSig |= LIT64(0x4000000000000000);
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x4000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- aSig |= LIT64(0x4000000000000000);
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat64(zSign, zExp, zSig);
-
-}
-static float64 addFloat64Sigs(float64 a, float64 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 9;
- bSig <<= 9;
- if (0 < expDiff) {
- if (aExp == 0x7FF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= LIT64(0x2000000000000000);
- }
- shift64RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0x7FF) {
- return a;
- }
- if (aExp == 0)
- return packFloat64(zSign, 0, (aSig + bSig) >> 9);
- zSig = LIT64(0x4000000000000000) + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= LIT64(0x2000000000000000);
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits64) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 packFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig;
-}
-
-void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr)
-{
- bits32 z;
- if (count == 0) {
- z = a;
- } else if (count < 32) {
- z = (a >> count) | ((a << ((-count) & 31)) != 0);
- } else {
- z = (a != 0);
- }
- *zPtr = z;
-}
-
-static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- flag roundNearestEven;
- int8 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x40;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x7F;
- if (0xFD <= (bits16) zExp) {
- if ((0xFD < zExp)
- || ((zExp == 0xFD)
- && ((sbits32) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat32(zSign, 0xFF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement < 0x80000000);
- shift32RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x7F;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 7;
- zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(zSig) - 1;
- return roundAndPackFloat32(zSign, zExp - shiftCount,
- zSig << shiftCount);
-}
-
-static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig)
-{
- flag roundNearestEven;
- int16 roundIncrement, roundBits;
- flag isTiny;
-
- /* SH4 has only 2 rounding modes - round to nearest and round to zero */
- roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST);
- roundIncrement = 0x200;
- if (!roundNearestEven) {
- roundIncrement = 0;
- }
- roundBits = zSig & 0x3FF;
- if (0x7FD <= (bits16) zExp) {
- if ((0x7FD < zExp)
- || ((zExp == 0x7FD)
- && ((sbits64) (zSig + roundIncrement) < 0))
- ) {
- float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT);
- return packFloat64(zSign, 0x7FF,
- 0) - (roundIncrement == 0);
- }
- if (zExp < 0) {
- isTiny = (zExp < -1)
- || (zSig + roundIncrement <
- LIT64(0x8000000000000000));
- shift64RightJamming(zSig, -zExp, &zSig);
- zExp = 0;
- roundBits = zSig & 0x3FF;
- if (isTiny && roundBits)
- float_raise(FPSCR_CAUSE_UNDERFLOW);
- }
- }
- if (roundBits)
- float_raise(FPSCR_CAUSE_INEXACT);
- zSig = (zSig + roundIncrement) >> 10;
- zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven);
- if (zSig == 0)
- zExp = 0;
- return packFloat64(zSign, zExp, zSig);
-
-}
-
-static float32 subFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 7;
- bSig <<= 7;
- if (0 < expDiff)
- goto aExpBigger;
- if (expDiff < 0)
- goto bExpBigger;
- if (aExp == 0) {
- aExp = 1;
- bExp = 1;
- }
- if (bSig < aSig)
- goto aBigger;
- if (aSig < bSig)
- goto bBigger;
- return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0);
- bExpBigger:
- if (bExp == 0xFF) {
- return packFloat32(zSign ^ 1, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x40000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- bSig |= 0x40000000;
- bBigger:
- zSig = bSig - aSig;
- zExp = bExp;
- zSign ^= 1;
- goto normalizeRoundAndPack;
- aExpBigger:
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x40000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- aSig |= 0x40000000;
- aBigger:
- zSig = aSig - bSig;
- zExp = aExp;
- normalizeRoundAndPack:
- --zExp;
- return normalizeRoundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-static float32 addFloat32Sigs(float32 a, float32 b, flag zSign)
-{
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig, zSig;
- int16 expDiff;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- expDiff = aExp - bExp;
- aSig <<= 6;
- bSig <<= 6;
- if (0 < expDiff) {
- if (aExp == 0xFF) {
- return a;
- }
- if (bExp == 0) {
- --expDiff;
- } else {
- bSig |= 0x20000000;
- }
- shift32RightJamming(bSig, expDiff, &bSig);
- zExp = aExp;
- } else if (expDiff < 0) {
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0xFF, 0);
- }
- if (aExp == 0) {
- ++expDiff;
- } else {
- aSig |= 0x20000000;
- }
- shift32RightJamming(aSig, -expDiff, &aSig);
- zExp = bExp;
- } else {
- if (aExp == 0xFF) {
- return a;
- }
- if (aExp == 0)
- return packFloat32(zSign, 0, (aSig + bSig) >> 6);
- zSig = 0x40000000 + aSig + bSig;
- zExp = aExp;
- goto roundAndPack;
- }
- aSig |= 0x20000000;
- zSig = (aSig + bSig) << 1;
- --zExp;
- if ((sbits32) zSig < 0) {
- zSig = aSig + bSig;
- ++zExp;
- }
- roundAndPack:
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_sub(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return subFloat64Sigs(a, b, aSign);
- } else {
- return addFloat64Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_sub(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return subFloat32Sigs(a, b, aSign);
- } else {
- return addFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float32 float32_add(float32 a, float32 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat32Sign(a);
- bSign = extractFloat32Sign(b);
- if (aSign == bSign) {
- return addFloat32Sigs(a, b, aSign);
- } else {
- return subFloat32Sigs(a, b, aSign);
- }
-
-}
-
-float64 float64_add(float64 a, float64 b)
-{
- flag aSign, bSign;
-
- aSign = extractFloat64Sign(a);
- bSign = extractFloat64Sign(b);
- if (aSign == bSign) {
- return addFloat64Sigs(a, b, aSign);
- } else {
- return subFloat64Sigs(a, b, aSign);
- }
-}
-
-static void
-normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros64(aSig) - 11;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-}
-
-void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- bits64 z1;
-
- z1 = a1 + b1;
- *z1Ptr = z1;
- *z0Ptr = a0 + b0 + (z1 < a1);
-}
-
-void
-sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr,
- bits64 * z1Ptr)
-{
- *z1Ptr = a1 - b1;
- *z0Ptr = a0 - b0 - (a1 < b1);
-}
-
-static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b)
-{
- bits64 b0, b1;
- bits64 rem0, rem1, term0, term1;
- bits64 z, tmp;
- if (b <= a0)
- return LIT64(0xFFFFFFFFFFFFFFFF);
- b0 = b >> 32;
- tmp = a0;
- do_div(tmp, b0);
-
- z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : tmp << 32;
- mul64To128(b, z, &term0, &term1);
- sub128(a0, a1, term0, term1, &rem0, &rem1);
- while (((sbits64) rem0) < 0) {
- z -= LIT64(0x100000000);
- b1 = b << 32;
- add128(rem0, rem1, b0, b1, &rem0, &rem1);
- }
- rem0 = (rem0 << 32) | (rem1 >> 32);
- tmp = rem0;
- do_div(tmp, b0);
- z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : tmp;
- return z;
-}
-
-void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr)
-{
- bits32 aHigh, aLow, bHigh, bLow;
- bits64 z0, zMiddleA, zMiddleB, z1;
-
- aLow = a;
- aHigh = a >> 32;
- bLow = b;
- bHigh = b >> 32;
- z1 = ((bits64) aLow) * bLow;
- zMiddleA = ((bits64) aLow) * bHigh;
- zMiddleB = ((bits64) aHigh) * bLow;
- z0 = ((bits64) aHigh) * bHigh;
- zMiddleA += zMiddleB;
- z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32);
- zMiddleA <<= 32;
- z1 += zMiddleA;
- z0 += (z1 < zMiddleA);
- *z1Ptr = z1;
- *z0Ptr = z0;
-
-}
-
-static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr,
- bits32 * zSigPtr)
-{
- int8 shiftCount;
-
- shiftCount = countLeadingZeros32(aSig) - 8;
- *zSigPtr = aSig << shiftCount;
- *zExpPtr = 1 - shiftCount;
-
-}
-
-float64 float64_div(float64 a, float64 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits64 aSig, bSig, zSig;
- bits64 rem0, rem1;
- bits64 term0, term1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0x7FF) {
- if (bExp == 0x7FF) {
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- if (bExp == 0x7FF) {
- return packFloat64(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- if ((aExp | aSig) == 0) {
- float_raise(FPSCR_CAUSE_INVALID);
- }
- return packFloat64(zSign, 0x7FF, 0);
- }
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x3FD;
- aSig = (aSig | LIT64(0x0010000000000000)) << 10;
- bSig = (bSig | LIT64(0x0010000000000000)) << 11;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = estimateDiv128To64(aSig, 0, bSig);
- if ((zSig & 0x1FF) <= 2) {
- mul64To128(bSig, zSig, &term0, &term1);
- sub128(aSig, 0, term0, term1, &rem0, &rem1);
- while ((sbits64) rem0 < 0) {
- --zSig;
- add128(rem0, rem1, 0, bSig, &rem0, &rem1);
- }
- zSig |= (rem1 != 0);
- }
- return roundAndPackFloat64(zSign, zExp, zSig);
-
-}
-
-float32 float32_div(float32 a, float32 b)
-{
- flag aSign, bSign, zSign;
- int16 aExp, bExp, zExp;
- bits32 aSig, bSig;
- uint64_t zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0xFF) {
- if (bExp == 0xFF) {
- }
- return packFloat32(zSign, 0xFF, 0);
- }
- if (bExp == 0xFF) {
- return packFloat32(zSign, 0, 0);
- }
- if (bExp == 0) {
- if (bSig == 0) {
- return packFloat32(zSign, 0xFF, 0);
- }
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- zExp = aExp - bExp + 0x7D;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- if (bSig <= (aSig + aSig)) {
- aSig >>= 1;
- ++zExp;
- }
- zSig = (((bits64) aSig) << 32);
- do_div(zSig, bSig);
-
- if ((zSig & 0x3F) == 0) {
- zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32);
- }
- return roundAndPackFloat32(zSign, zExp, (bits32)zSig);
-
-}
-
-float32 float32_mul(float32 a, float32 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned int aSig, bSig;
- unsigned long long zSig64;
- unsigned int zSig;
-
- aSig = extractFloat32Frac(a);
- aExp = extractFloat32Exp(a);
- aSign = extractFloat32Sign(a);
- bSig = extractFloat32Frac(b);
- bExp = extractFloat32Exp(b);
- bSign = extractFloat32Sign(b);
- zSign = aSign ^ bSign;
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat32(zSign, 0, 0);
- normalizeFloat32Subnormal(bSig, &bExp, &bSig);
- }
- if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0))
- return roundAndPackFloat32(zSign, 0xff, 0);
-
- zExp = aExp + bExp - 0x7F;
- aSig = (aSig | 0x00800000) << 7;
- bSig = (bSig | 0x00800000) << 8;
- shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64);
- zSig = zSig64;
- if (0 <= (signed int)(zSig << 1)) {
- zSig <<= 1;
- --zExp;
- }
- return roundAndPackFloat32(zSign, zExp, zSig);
-
-}
-
-float64 float64_mul(float64 a, float64 b)
-{
- char aSign, bSign, zSign;
- int aExp, bExp, zExp;
- unsigned long long int aSig, bSig, zSig0, zSig1;
-
- aSig = extractFloat64Frac(a);
- aExp = extractFloat64Exp(a);
- aSign = extractFloat64Sign(a);
- bSig = extractFloat64Frac(b);
- bExp = extractFloat64Exp(b);
- bSign = extractFloat64Sign(b);
- zSign = aSign ^ bSign;
-
- if (aExp == 0) {
- if (aSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(aSig, &aExp, &aSig);
- }
- if (bExp == 0) {
- if (bSig == 0)
- return packFloat64(zSign, 0, 0);
- normalizeFloat64Subnormal(bSig, &bExp, &bSig);
- }
- if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0))
- return roundAndPackFloat64(zSign, 0x7ff, 0);
-
- zExp = aExp + bExp - 0x3FF;
- aSig = (aSig | 0x0010000000000000LL) << 10;
- bSig = (bSig | 0x0010000000000000LL) << 11;
- mul64To128(aSig, bSig, &zSig0, &zSig1);
- zSig0 |= (zSig1 != 0);
- if (0 <= (signed long long int)(zSig0 << 1)) {
- zSig0 <<= 1;
- --zExp;
- }
- return roundAndPackFloat64(zSign, zExp, zSig0);
-}
-
-/*
- * -------------------------------------------------------------------------------
- * Returns the result of converting the double-precision floating-point value
- * `a' to the single-precision floating-point format. The conversion is
- * performed according to the IEC/IEEE Standard for Binary Floating-point
- * Arithmetic.
- * -------------------------------------------------------------------------------
- * */
-float32 float64_to_float32(float64 a)
-{
- flag aSign;
- int16 aExp;
- bits64 aSig;
- bits32 zSig;
-
- aSig = extractFloat64Frac( a );
- aExp = extractFloat64Exp( a );
- aSign = extractFloat64Sign( a );
-
- shift64RightJamming( aSig, 22, &aSig );
- zSig = aSig;
- if ( aExp || zSig ) {
- zSig |= 0x40000000;
- aExp -= 0x381;
- }
- return roundAndPackFloat32(aSign, aExp, zSig);
-}
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
deleted file mode 100644
index a76b94e41e9134..00000000000000
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/sq.c
- *
- * General management API for SH-4 integrated Store Queues
- *
- * Copyright (C) 2001 - 2006 Paul Mundt
- * Copyright (C) 2001, 2002 M. R. Brown
- */
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/bitmap.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/prefetch.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <cpu/sq.h>
-
-struct sq_mapping;
-
-struct sq_mapping {
- const char *name;
-
- unsigned long sq_addr;
- unsigned long addr;
- unsigned int size;
-
- struct sq_mapping *next;
-};
-
-static struct sq_mapping *sq_mapping_list;
-static DEFINE_SPINLOCK(sq_mapping_lock);
-static struct kmem_cache *sq_cache;
-static unsigned long *sq_bitmap;
-
-#define store_queue_barrier() \
-do { \
- (void)__raw_readl(P4SEG_STORE_QUE); \
- __raw_writel(0, P4SEG_STORE_QUE + 0); \
- __raw_writel(0, P4SEG_STORE_QUE + 8); \
-} while (0);
-
-/**
- * sq_flush_range - Flush (prefetch) a specific SQ range
- * @start: the store queue address to start flushing from
- * @len: the length to flush
- *
- * Flushes the store queue cache from @start to @start + @len in a
- * linear fashion.
- */
-void sq_flush_range(unsigned long start, unsigned int len)
-{
- unsigned long *sq = (unsigned long *)start;
-
- /* Flush the queues */
- for (len >>= 5; len--; sq += 8)
- prefetchw(sq);
-
- /* Wait for completion */
- store_queue_barrier();
-}
-EXPORT_SYMBOL(sq_flush_range);
-
-static inline void sq_mapping_list_add(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- p = &sq_mapping_list;
- while ((tmp = *p) != NULL)
- p = &tmp->next;
-
- map->next = tmp;
- *p = map;
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static inline void sq_mapping_list_del(struct sq_mapping *map)
-{
- struct sq_mapping **p, *tmp;
-
- spin_lock_irq(&sq_mapping_lock);
-
- for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
- if (tmp == map) {
- *p = tmp->next;
- break;
- }
-
- spin_unlock_irq(&sq_mapping_lock);
-}
-
-static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
-{
-#if defined(CONFIG_MMU)
- struct vm_struct *vma;
-
- vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr,
- SQ_ADDRMAX, __builtin_return_address(0));
- if (!vma)
- return -ENOMEM;
-
- vma->phys_addr = map->addr;
-
- if (ioremap_page_range((unsigned long)vma->addr,
- (unsigned long)vma->addr + map->size,
- vma->phys_addr, prot)) {
- vunmap(vma->addr);
- return -EAGAIN;
- }
-#else
- /*
- * Without an MMU (or with it turned off), this is much more
- * straightforward, as we can just load up each queue's QACR with
- * the physical address appropriately masked.
- */
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
- __raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
-#endif
-
- return 0;
-}
-
-/**
- * sq_remap - Map a physical address through the Store Queues
- * @phys: Physical address of mapping.
- * @size: Length of mapping.
- * @name: User invoking mapping.
- * @prot: Protection bits.
- *
- * Remaps the physical address @phys through the next available store queue
- * address of @size length. @name is logged at boot time as well as through
- * the sysfs interface.
- */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
- const char *name, pgprot_t prot)
-{
- struct sq_mapping *map;
- unsigned long end;
- unsigned int psz;
- int ret, page;
-
- /* Don't allow wraparound or zero size */
- end = phys + size - 1;
- if (unlikely(!size || end < phys))
- return -EINVAL;
- /* Don't allow anyone to remap normal memory.. */
- if (unlikely(phys < virt_to_phys(high_memory)))
- return -EINVAL;
-
- phys &= PAGE_MASK;
- size = PAGE_ALIGN(end + 1) - phys;
-
- map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
- if (unlikely(!map))
- return -ENOMEM;
-
- map->addr = phys;
- map->size = size;
- map->name = name;
-
- page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT,
- get_order(map->size));
- if (unlikely(page < 0)) {
- ret = -ENOSPC;
- goto out;
- }
-
- map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
-
- ret = __sq_remap(map, prot);
- if (unlikely(ret != 0))
- goto out;
-
- psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- pr_info("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n",
- likely(map->name) ? map->name : "???",
- psz, psz == 1 ? " " : "s",
- map->sq_addr, map->addr);
-
- sq_mapping_list_add(map);
-
- return map->sq_addr;
-
-out:
- kmem_cache_free(sq_cache, map);
- return ret;
-}
-EXPORT_SYMBOL(sq_remap);
-
-/**
- * sq_unmap - Unmap a Store Queue allocation
- * @vaddr: Pre-allocated Store Queue mapping.
- *
- * Unmaps the store queue allocation @map that was previously created by
- * sq_remap(). Also frees up the pte that was previously inserted into
- * the kernel page table and discards the UTLB translation.
- */
-void sq_unmap(unsigned long vaddr)
-{
- struct sq_mapping **p, *map;
- int page;
-
- for (p = &sq_mapping_list; (map = *p); p = &map->next)
- if (map->sq_addr == vaddr)
- break;
-
- if (unlikely(!map)) {
- printk("%s: bad store queue address 0x%08lx\n",
- __func__, vaddr);
- return;
- }
-
- page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
- bitmap_release_region(sq_bitmap, page, get_order(map->size));
-
-#ifdef CONFIG_MMU
- {
- /*
- * Tear down the VMA in the MMU case.
- */
- struct vm_struct *vma;
-
- vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
- if (!vma) {
- printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __func__, map->sq_addr);
- return;
- }
- }
-#endif
-
- sq_mapping_list_del(map);
-
- kmem_cache_free(sq_cache, map);
-}
-EXPORT_SYMBOL(sq_unmap);
-
-/*
- * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
- * there is any other easy way to add things on a per-cpu basis without
- * putting the directory entries somewhere stupid and having to create
- * links in sysfs by hand back in to the per-cpu directories.
- *
- * Some day we may want to have an additional abstraction per store
- * queue, but considering the kobject hell we already have to deal with,
- * it's simply not worth the trouble.
- */
-static struct kobject *sq_kobject[NR_CPUS];
-
-struct sq_sysfs_attr {
- struct attribute attr;
- ssize_t (*show)(char *buf);
- ssize_t (*store)(const char *buf, size_t count);
-};
-
-#define to_sq_sysfs_attr(a) container_of(a, struct sq_sysfs_attr, attr)
-
-static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->show))
- return sattr->show(buf);
-
- return -EIO;
-}
-
-static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
-{
- struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
-
- if (likely(sattr->store))
- return sattr->store(buf, count);
-
- return -EIO;
-}
-
-static ssize_t mapping_show(char *buf)
-{
- struct sq_mapping **list, *entry;
- char *p = buf;
-
- for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
- p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
- entry->sq_addr, entry->sq_addr + entry->size,
- entry->addr, entry->name);
-
- return p - buf;
-}
-
-static ssize_t mapping_store(const char *buf, size_t count)
-{
- unsigned long base = 0, len = 0;
-
- sscanf(buf, "%lx %lx", &base, &len);
- if (!base)
- return -EIO;
-
- if (likely(len)) {
- int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
- if (ret < 0)
- return ret;
- } else
- sq_unmap(base);
-
- return count;
-}
-
-static struct sq_sysfs_attr mapping_attr =
- __ATTR(mapping, 0644, mapping_show, mapping_store);
-
-static struct attribute *sq_sysfs_attrs[] = {
- &mapping_attr.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(sq_sysfs);
-
-static const struct sysfs_ops sq_sysfs_ops = {
- .show = sq_sysfs_show,
- .store = sq_sysfs_store,
-};
-
-static struct kobj_type ktype_percpu_entry = {
- .sysfs_ops = &sq_sysfs_ops,
- .default_groups = sq_sysfs_groups,
-};
-
-static int sq_dev_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj;
- int error;
-
- sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
- if (unlikely(!sq_kobject[cpu]))
- return -ENOMEM;
-
- kobj = sq_kobject[cpu];
- error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
- "%s", "sq");
- if (!error)
- kobject_uevent(kobj, KOBJ_ADD);
- return error;
-}
-
-static void sq_dev_remove(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int cpu = dev->id;
- struct kobject *kobj = sq_kobject[cpu];
-
- kobject_put(kobj);
-}
-
-static struct subsys_interface sq_interface = {
- .name = "sq",
- .subsys = &cpu_subsys,
- .add_dev = sq_dev_add,
- .remove_dev = sq_dev_remove,
-};
-
-static int __init sq_api_init(void)
-{
- unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
- unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
- int ret = -ENOMEM;
-
- printk(KERN_NOTICE "sq: Registering store queue API.\n");
-
- sq_cache = kmem_cache_create("store_queue_cache",
- sizeof(struct sq_mapping), 0, 0, NULL);
- if (unlikely(!sq_cache))
- return ret;
-
- sq_bitmap = kzalloc(size, GFP_KERNEL);
- if (unlikely(!sq_bitmap))
- goto out;
-
- ret = subsys_interface_register(&sq_interface);
- if (unlikely(ret != 0))
- goto out;
-
- return 0;
-
-out:
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-
- return ret;
-}
-
-static void __exit sq_api_exit(void)
-{
- subsys_interface_unregister(&sq_interface);
- kfree(sq_bitmap);
- kmem_cache_destroy(sq_cache);
-}
-
-module_init(sq_api_init);
-module_exit(sq_api_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
-MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
deleted file mode 100644
index baf73a8fc2a0f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-4 backends.
-#
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7757) += setup-sh7757.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o serial-sh7722.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7734) += setup-sh7734.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
-obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o intc-shx3.o
-
-# SMP setup
-smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SUBTYPE_SH7757) := clock-sh7757.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7723.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7724.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7734) := clock-sh7734.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7366.o
-clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
-
-# Pinmux setup
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7734) := pinmux-sh7734.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7757) := pinmux-sh7757.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
-pinmux-$(CONFIG_CPU_SUBTYPE_SHX3) := pinmux-shx3.o
-
-obj-y += $(clock-y)
-obj-$(CONFIG_SMP) += $(smp-y)
-obj-$(CONFIG_GPIOLIB) += $(pinmux-y)
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 32cb5d1fd3b32f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7343 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP004, MSTP003, MSTP002, MSTP001,
- MSTP109, MSTP108, MSTP100,
- MSTP225, MSTP224, MSTP218, MSTP217, MSTP216,
- MSTP214, MSTP213, MSTP212, MSTP211, MSTP208,
- MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP003] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [MSTP225] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 25, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP216] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 16, 0),
- [MSTP214] = MSTP(&r_clk, MSTPCR2, 14, 0),
- [MSTP213] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 13, 0),
- [MSTP212] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 12, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP208] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [MSTP206] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("uram0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP004]),
-
- CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
- CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("sim0", &mstp_clks[MSTP216]),
- CLKDEV_CON_ID("keysc0", &mstp_clks[MSTP214]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP213]),
- CLKDEV_CON_ID("s3d40", &mstp_clks[MSTP212]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("siu0", &mstp_clks[MSTP208]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[MSTP206]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
deleted file mode 100644
index aa3444b41e72a2..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7366.c
- *
- * SH7366 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-
-/* SH7366 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
- DIV4_SIUA, DIV4_SIUB, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-#define MSTP(_parent, _reg, _bit, _flags) \
- SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
- MSTP007, MSTP006, MSTP005, MSTP002, MSTP001,
- MSTP109, MSTP100,
- MSTP227, MSTP226, MSTP224, MSTP223, MSTP222, MSTP218, MSTP217,
- MSTP211, MSTP207, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
- [MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [MSTP028] = MSTP(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
- [MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
- [MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
- [MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
-
- [MSTP227] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [MSTP226] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 26, 0),
- [MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [MSTP223] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 23, 0),
- [MSTP222] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 22, 0),
- [MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
- [MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [MSTP207] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
- [MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
- [MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
- [MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP32 clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
- CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
- CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
- CLKDEV_CON_ID("rsmem0", &mstp_clks[MSTP028]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
- CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
-
- CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
- CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
- CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),
- CLKDEV_CON_ID("dacy0", &mstp_clks[MSTP223]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP222]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
- CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
- CLKDEV_CON_ID("veu1", &mstp_clks[MSTP207]),
- CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
- CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
- CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
- CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
- CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
deleted file mode 100644
index 38b057703eaada..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
- *
- * SH7722 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7722.h>
-
-/* SH7722 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll block multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x1fff, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
-};
-
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_URAM] = SH_CLK_MSTP32(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_XYMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_TMU] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_SDHI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USBF] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
- CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
-
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usbf0", &mstp_clks[HWBLK_USBF]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
deleted file mode 100644
index 9dc3a987d7cf87..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ /dev/null
@@ -1,301 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7723.c
- *
- * SH7723 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7723.h>
-
-/* SH7723 registers */
-#define FRQCR 0xa4150000
-#define VCLKCR 0xa4150004
-#define SCLKACR 0xa4150008
-#define SCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define DLLFRQ 0xa4150050
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The dll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long dll_recalc(struct clk *clk)
-{
- unsigned long mult;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(DLLFRQ);
- else
- mult = 0;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops dll_clk_ops = {
- .recalc = dll_recalc,
-};
-
-static struct clk dll_clk = {
- .ops = &dll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1);
- else
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &dll_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
- [DIV4_B3] = DIV4(FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_IRDA, DIV4_ENABLE_NR };
-
-struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
- [DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x0dbf, 0),
-};
-
-enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
-
-struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
- [DIV4_SIUA] = DIV4(SCLKACR, 0, 0x0dbf, 0),
- [DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x0dbf, 0),
-};
-enum { DIV6_V, DIV6_NR };
-
-struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
-};
-
-static struct clk mstp_clks[] = {
- /* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [HWBLK_FLCTL] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
- [HWBLK_MERAM] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 0, 0),
-
- [HWBLK_IIC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 8, 0),
-
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 28, 0),
- [HWBLK_ADC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_ICB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, CLK_ENABLE_ON_INIT),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR2, 14, 0),
- [HWBLK_USB] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 11, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 10, 0),
- [HWBLK_SIU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
- [HWBLK_VEU2H1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU2H0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("dll_clk", &dll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
- CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
- CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
- CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[HWBLK_MERAM]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_CON_ID("icb0", &mstp_clks[HWBLK_ICB]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("siu-pcm-audio", &mstp_clks[HWBLK_SIU]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
- CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
- CLKDEV_DEV_ID("ceu.0", &mstp_clks[HWBLK_CEU]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or dll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &dll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret |= clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_enable_register(div4_enable_clks,
- DIV4_ENABLE_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div4_reparent_register(div4_reparent_clks,
- DIV4_REPARENT_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
deleted file mode 100644
index 2a1f0d847a2efb..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7724.c
- *
- * SH7724 clock framework support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_clk.h>
-#include <asm/clock.h>
-#include <cpu/sh7724.h>
-
-/* SH7724 registers */
-#define FRQCRA 0xa4150000
-#define FRQCRB 0xa4150004
-#define VCLKCR 0xa4150048
-#define FCLKACR 0xa4150008
-#define FCLKBCR 0xa415000c
-#define IRDACLKCR 0xa4150018
-#define PLLCR 0xa4150024
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-#define SPUCLKCR 0xa415003c
-#define FLLFRQ 0xa4150050
-#define LSTATS 0xa4150060
-
-/* Fixed 32 KHz root clock for RTC and Power Management purposes */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-/* The fll multiplies the 32khz r_clk, may be used instead of extal */
-static unsigned long fll_recalc(struct clk *clk)
-{
- unsigned long mult = 0;
- unsigned long div = 1;
-
- if (__raw_readl(PLLCR) & 0x1000)
- mult = __raw_readl(FLLFRQ) & 0x3ff;
-
- if (__raw_readl(FLLFRQ) & 0x4000)
- div = 2;
-
- return (clk->parent->rate * mult) / div;
-}
-
-static struct sh_clk_ops fll_clk_ops = {
- .recalc = fll_recalc,
-};
-
-static struct clk fll_clk = {
- .ops = &fll_clk_ops,
- .parent = &r_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (__raw_readl(PLLCR) & 0x4000)
- mult = (((__raw_readl(FRQCRA) >> 24) & 0x3f) + 1) * 2;
-
- return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-/* A fixed divide-by-3 block use by the div6 clocks */
-static unsigned long div3_recalc(struct clk *clk)
-{
- return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops div3_clk_ops = {
- .recalc = div3_recalc,
-};
-
-static struct clk div3_clk = {
- .ops = &div3_clk_ops,
- .parent = &pll_clk,
-};
-
-/* External input clock (pin name: FSIMCKA/FSIMCKB/DV_CLKI ) */
-struct clk sh7724_fsimcka_clk = {
-};
-
-struct clk sh7724_fsimckb_clk = {
-};
-
-struct clk sh7724_dv_clki = {
-};
-
-static struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &fll_clk,
- &pll_clk,
- &div3_clk,
- &sh7724_fsimcka_clk,
- &sh7724_fsimckb_clk,
- &sh7724_dv_clki,
-};
-
-static void div4_kick(struct clk *clk)
-{
- unsigned long value;
-
- /* set KICK bit in FRQCRA to update hardware setting */
- value = __raw_readl(FRQCRA);
- value |= (1 << 31);
- __raw_writel(value, FRQCRA);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQCRA, 0, 0x2f7c, 0),
- [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
-};
-
-enum { DIV6_V, DIV6_I, DIV6_S, DIV6_FA, DIV6_FB, DIV6_NR };
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *common_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
-};
-
-static struct clk *vclkcr_parent[8] = {
- [0] = &div3_clk,
- [2] = &sh7724_dv_clki,
- [4] = &extal_clk,
-};
-
-static struct clk *fclkacr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimcka_clk,
- [3] = NULL,
-};
-
-static struct clk *fclkbcr_parent[] = {
- [0] = &div3_clk,
- [1] = NULL,
- [2] = &sh7724_fsimckb_clk,
- [3] = NULL,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_V] = SH_CLK_DIV6_EXT(VCLKCR, 0,
- vclkcr_parent, ARRAY_SIZE(vclkcr_parent), 12, 3),
- [DIV6_I] = SH_CLK_DIV6_EXT(IRDACLKCR, 0,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_S] = SH_CLK_DIV6_EXT(SPUCLKCR, CLK_ENABLE_ON_INIT,
- common_parent, ARRAY_SIZE(common_parent), 6, 1),
- [DIV6_FA] = SH_CLK_DIV6_EXT(FCLKACR, 0,
- fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
- [DIV6_FB] = SH_CLK_DIV6_EXT(FCLKBCR, 0,
- fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
-};
-
-static struct clk mstp_clks[HWBLK_NR] = {
- [HWBLK_TLB] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
- [HWBLK_IC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
- [HWBLK_OC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
- [HWBLK_RSMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
- [HWBLK_ILMEM] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 27, CLK_ENABLE_ON_INIT),
- [HWBLK_L2C] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
- [HWBLK_FPU] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 24, CLK_ENABLE_ON_INIT),
- [HWBLK_INTC] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, CLK_ENABLE_ON_INIT),
- [HWBLK_DMAC0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 21, 0),
- [HWBLK_SHYWAY] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR0, 20, CLK_ENABLE_ON_INIT),
- [HWBLK_HUDI] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [HWBLK_UBC] = SH_CLK_MSTP32(&div4_clks[DIV4_I], MSTPCR0, 17, 0),
- [HWBLK_TMU0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [HWBLK_CMT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 14, 0),
- [HWBLK_RWDT] = SH_CLK_MSTP32(&r_clk, MSTPCR0, 13, 0),
- [HWBLK_DMAC1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 12, 0),
- [HWBLK_TMU1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [HWBLK_SCIF0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [HWBLK_SCIF1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [HWBLK_SCIF2] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
- [HWBLK_SCIF3] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 6, 0),
- [HWBLK_SCIF4] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 5, 0),
- [HWBLK_SCIF5] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 4, 0),
- [HWBLK_MSIOF0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 2, 0),
- [HWBLK_MSIOF1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR0, 1, 0),
-
- [HWBLK_KEYSC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 12, 0),
- [HWBLK_RTC] = SH_CLK_MSTP32(&r_clk, MSTPCR1, 11, 0),
- [HWBLK_IIC0] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [HWBLK_IIC1] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
- [HWBLK_MMC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 29, 0),
- [HWBLK_ETHER] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 28, 0),
- [HWBLK_ATAPI] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 26, 0),
- [HWBLK_TPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 25, 0),
- [HWBLK_IRDA] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
- [HWBLK_TSIF] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 22, 0),
- [HWBLK_USB1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 21, 0),
- [HWBLK_USB0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 20, 0),
- [HWBLK_2DG] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 19, 0),
- [HWBLK_SDHI0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 18, 0),
- [HWBLK_SDHI1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 17, 0),
- [HWBLK_VEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 15, 0),
- [HWBLK_CEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 13, 0),
- [HWBLK_BEU1] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 12, 0),
- [HWBLK_2DDMAC] = SH_CLK_MSTP32(&div4_clks[DIV4_SH], MSTPCR2, 10, 0),
- [HWBLK_SPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 9, 0),
- [HWBLK_JPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 6, 0),
- [HWBLK_VOU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
- [HWBLK_BEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
- [HWBLK_CEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
- [HWBLK_VEU0] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 2, 0),
- [HWBLK_VPU] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 1, 0),
- [HWBLK_LCDC] = SH_CLK_MSTP32(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("fll_clk", &fll_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("div3_clk", &div3_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("vpu_clk", &div4_clks[DIV4_M1]),
-
- /* DIV6 clocks */
- CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
- CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
- CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
-
- /* MSTP clocks */
- CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
- CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
- CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
- CLKDEV_CON_ID("rs0", &mstp_clks[HWBLK_RSMEM]),
- CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
- CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
- CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
- CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[HWBLK_DMAC0]),
- CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
- CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
-
- CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]),
- CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]),
- CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]),
-
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
-
- CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[HWBLK_MSIOF0]),
- CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[HWBLK_MSIOF1]),
- CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[HWBLK_KEYSC]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC0]),
- CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[HWBLK_IIC1]),
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[HWBLK_MMC]),
- CLKDEV_DEV_ID("sh7724-ether.0", &mstp_clks[HWBLK_ETHER]),
- CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
- CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
- CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
- CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
- CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
- CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
- CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
- CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU1]),
- CLKDEV_DEV_ID("renesas-ceu.1", &mstp_clks[HWBLK_CEU1]),
- CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
- CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
- CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
- CLKDEV_DEV_ID("sh-vou", &mstp_clks[HWBLK_VOU]),
- CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
- CLKDEV_DEV_ID("renesas-ceu.0", &mstp_clks[HWBLK_CEU0]),
- CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU0]),
- CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
-};
-
-int __init arch_clk_init(void)
-{
- int k, ret = 0;
-
- /* autodetect extal or fll configuration */
- if (__raw_readl(PLLCR) & 0x1000)
- pll_clk.parent = &fll_clk;
- else
- pll_clk.parent = &extal_clk;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
deleted file mode 100644
index c81ee60eddb8e7..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7734.c
- *
- * Clock framework for SH7734
- *
- * Copyright (C) 2011, 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011, 2012 Renesas Solutions Corp.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/delay.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-#define MODEMR (0xFFCC0020)
-#define MODEMR_MASK (0x6)
-#define MODEMR_533MHZ (0x2)
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int mode = 12;
- u32 r = __raw_readl(MODEMR);
-
- if ((r & MODEMR_MASK) & MODEMR_533MHZ)
- mode = 16;
-
- return clk->parent->rate * mode;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static int multipliers[] = { 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_S, DIV4_B, DIV4_M, DIV4_S1, DIV4_P, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQMR1, 28, 0x0003, CLK_ENABLE_ON_INIT),
- [DIV4_S] = DIV4(FRQMR1, 20, 0x000C, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(FRQMR1, 16, 0x0140, CLK_ENABLE_ON_INIT),
- [DIV4_M] = DIV4(FRQMR1, 12, 0x0004, CLK_ENABLE_ON_INIT),
- [DIV4_S1] = DIV4(FRQMR1, 4, 0x0030, CLK_ENABLE_ON_INIT),
- [DIV4_P] = DIV4(FRQMR1, 0, 0x0140, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xFFC80030
-#define MSTPCR1 0xFFC80034
-#define MSTPCR3 0xFFC8003C
-
-enum {
- MSTP030, MSTP029, /* IIC */
- MSTP026, MSTP025, MSTP024, /* SCIF */
- MSTP023,
- MSTP022, MSTP021,
- MSTP019, /* HSCIF */
- MSTP016, MSTP015, MSTP014, /* TMU / TIMER */
- MSTP012, MSTP011, MSTP010, MSTP009, MSTP008, /* SSI */
- MSTP007, /* HSPI */
- MSTP115, /* ADMAC */
- MSTP114, /* GETHER */
- MSTP111, /* DMAC */
- MSTP109, /* VIDEOIN1 */
- MSTP108, /* VIDEOIN0 */
- MSTP107, /* RGPVBG */
- MSTP106, /* 2DG */
- MSTP103, /* VIEW */
- MSTP100, /* USB */
- MSTP331, /* MMC */
- MSTP330, /* MIMLB */
- MSTP323, /* SDHI0 */
- MSTP322, /* SDHI1 */
- MSTP321, /* SDHI2 */
- MSTP320, /* RQSPI */
- MSTP319, /* SRC0 */
- MSTP318, /* SRC1 */
- MSTP317, /* RSPI */
- MSTP316, /* RCAN0 */
- MSTP315, /* RCAN1 */
- MSTP314, /* FLTCL */
- MSTP313, /* ADC */
- MSTP312, /* MTU */
- MSTP304, /* IE-BUS */
- MSTP303, /* RTC */
- MSTP302, /* HIF */
- MSTP301, /* STIF0 */
- MSTP300, /* STIF1 */
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0),
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP019] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
-
- /* MSTPCR1 */
- [MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP109] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
- [MSTP107] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 7, 0),
- [MSTP106] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 6, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0),
-
- /* MSTPCR3 */
- [MSTP331] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 31, 0),
- [MSTP330] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 30, 0),
- [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0),
- [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0),
- [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0),
- [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0),
- [MSTP319] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 19, 0),
- [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 18, 0),
- [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 17, 0),
- [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 16, 0),
- [MSTP315] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 15, 0),
- [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 14, 0),
- [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 13, 0),
- [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 12, 0),
- [MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 4, 0),
- [MSTP303] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 3, 0),
- [MSTP302] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 2, 0),
- [MSTP301] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 1, 0),
- [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_M]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk1", &div4_clks[DIV4_S1]),
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("i2c-sh7734.0", &mstp_clks[MSTP030]),
- CLKDEV_DEV_ID("i2c-sh7734.1", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP024]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP023]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP022]),
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP014]),
- CLKDEV_CON_ID("ssi0", &mstp_clks[MSTP012]),
- CLKDEV_CON_ID("ssi1", &mstp_clks[MSTP011]),
- CLKDEV_CON_ID("ssi2", &mstp_clks[MSTP010]),
- CLKDEV_CON_ID("ssi3", &mstp_clks[MSTP009]),
- CLKDEV_CON_ID("sss", &mstp_clks[MSTP008]),
- CLKDEV_CON_ID("hspi", &mstp_clks[MSTP007]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP100]),
- CLKDEV_CON_ID("videoin0", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("videoin1", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("rgpvg", &mstp_clks[MSTP107]),
- CLKDEV_CON_ID("2dg", &mstp_clks[MSTP106]),
- CLKDEV_CON_ID("view", &mstp_clks[MSTP103]),
-
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP331]),
- CLKDEV_CON_ID("mimlb0", &mstp_clks[MSTP330]),
- CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP323]),
- CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP322]),
- CLKDEV_CON_ID("sdhi2", &mstp_clks[MSTP321]),
- CLKDEV_CON_ID("rqspi0", &mstp_clks[MSTP320]),
- CLKDEV_CON_ID("src0", &mstp_clks[MSTP319]),
- CLKDEV_CON_ID("src1", &mstp_clks[MSTP318]),
- CLKDEV_CON_ID("rsp0", &mstp_clks[MSTP317]),
- CLKDEV_CON_ID("rcan0", &mstp_clks[MSTP316]),
- CLKDEV_CON_ID("rcan1", &mstp_clks[MSTP315]),
- CLKDEV_CON_ID("fltcl0", &mstp_clks[MSTP314]),
- CLKDEV_CON_ID("adc0", &mstp_clks[MSTP313]),
- CLKDEV_CON_ID("mtu0", &mstp_clks[MSTP312]),
- CLKDEV_CON_ID("iebus0", &mstp_clks[MSTP304]),
- CLKDEV_DEV_ID("sh7734-gether.0", &mstp_clks[MSTP114]),
- CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP303]),
- CLKDEV_CON_ID("hif0", &mstp_clks[MSTP302]),
- CLKDEV_CON_ID("stif0", &mstp_clks[MSTP301]),
- CLKDEV_CON_ID("stif1", &mstp_clks[MSTP300]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(main_clks); i++)
- ret |= clk_register(main_clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
deleted file mode 100644
index 9acb72210fed48..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh7757.c
- *
- * SH7757 support for the clock framework
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 48000000,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN0) ? 24 : 16;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 1, 2, 1, 1, 4, 1, 6,
- 1, 1, 1, 16, 1, 24, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQCR, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- /*
- * P clock is always enable, because some P clock modules is used
- * by Host PC.
- */
- [DIV4_P] = DIV4(0, 0x2800, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(12, 0x00a0, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(20, 0x0004, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR2 0xffc10028
-
-enum { MSTP004, MSTP000, MSTP127, MSTP114, MSTP113, MSTP112,
- MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 27, 0),
- [MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
- [MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
- [MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
- [MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
- [MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
- [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
-
- /* MSTPCR2 */
- [MSTP220] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR2, 20, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
- CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP112]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP111]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP110]),
-
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
- CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
- CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
- CLKDEV_DEV_ID("rspi.2", &mstp_clks[MSTP127]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
deleted file mode 100644
index aaff4b96812c6a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7763.c
- *
- * SH7763 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
-}
-
-static struct sh_clk_ops sh7763_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
- return clk->parent->rate / p0fc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static struct sh_clk_ops sh7763_cpu_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct sh_clk_ops *sh7763_clk_ops[] = {
- &sh7763_master_clk_ops,
- &sh7763_module_clk_ops,
- &sh7763_bus_clk_ops,
- &sh7763_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7763_clk_ops))
- *ops = sh7763_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7763_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7763_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7763_shyway_clk_ops,
-};
-
-/*
- * Additional SH7763-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7763_onchip_clocks[] = {
- &sh7763_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7763_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
- struct clk *clkp = sh7763_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
deleted file mode 100644
index f356dfcd17b751..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
- *
- * SH7770 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
-static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
-}
-
-static struct sh_clk_ops sh7770_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x000f);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7770_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7770_clk_ops[] = {
- &sh7770_master_clk_ops,
- &sh7770_module_clk_ops,
- &sh7770_bus_clk_ops,
- &sh7770_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7770_clk_ops))
- *ops = sh7770_clk_ops[idx];
-}
-
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
deleted file mode 100644
index fc0a3efb53d5e0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
- *
- * SH7780 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 2, 4 };
-static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
-static int pfc_divisors[] = { 1, 24, 24, 1 };
-static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
-}
-
-static struct sh_clk_ops sh7780_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(FRQCR) & 0x0003);
- return clk->parent->rate / pfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
- return clk->parent->rate / bfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
- return clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh7780_clk_ops[] = {
- &sh7780_master_clk_ops,
- &sh7780_module_clk_ops,
- &sh7780_bus_clk_ops,
- &sh7780_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7780_clk_ops))
- *ops = sh7780_clk_ops[idx];
-}
-
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
- return clk->parent->rate / cfc_divisors[idx];
-}
-
-static struct sh_clk_ops sh7780_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
-};
-
-static struct clk sh7780_shyway_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh7780_shyway_clk_ops,
-};
-
-/*
- * Additional SH7780-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7780_onchip_clocks[] = {
- &sh7780_shyway_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("shyway_clk", &sh7780_shyway_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
- struct clk *clkp = sh7780_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
deleted file mode 100644
index fca351378bbce6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
- *
- * SH7785 support for the clock framework
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <cpu/sh7785.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- multiplier = test_mode_pin(MODE_PIN4) ? 36 : 72;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
- DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_DU] = DIV4(4, 0x0ff0, 0),
- [DIV4_GA] = DIV4(8, 0x0030, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_U] = DIV4(24, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP013, MSTP012, MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP119, MSTP117, MSTP105, MSTP104, MSTP100,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP013] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 13, 0),
- [MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP117] = SH_CLK_MSTP32(NULL, MSTPCR1, 17, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP100] = SH_CLK_MSTP32(NULL, MSTPCR1, 0, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ga_clk", &div4_clks[DIV4_GA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]),
- CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP117]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
deleted file mode 100644
index f23862df3e8fb9..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
- *
- * SH7786 support for the clock framework
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 33333333,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- int multiplier;
-
- /*
- * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
- * while modes 3, 4, and 5 use an x32.
- */
- multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
-
- return clk->parent->rate * multiplier;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0b40, 0),
- [DIV4_DU] = DIV4(4, 0x0010, 0),
- [DIV4_DDR] = DIV4(12, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0360, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x0002, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x0006, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc40030
-#define MSTPCR1 0xffc40034
-
-enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP023, MSTP022, MSTP021, MSTP020, MSTP017, MSTP016,
- MSTP015, MSTP014, MSTP011, MSTP010, MSTP009, MSTP008,
- MSTP005, MSTP004, MSTP002,
- MSTP112, MSTP110, MSTP109, MSTP108,
- MSTP105, MSTP104, MSTP103, MSTP102,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
- [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
- [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
- [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
- [MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
- [MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
- [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
- [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
- [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
- [MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
- [MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP005] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
- [MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
-
- /* MSTPCR1 */
- [MSTP112] = SH_CLK_MSTP32(NULL, MSTPCR1, 12, 0),
- [MSTP110] = SH_CLK_MSTP32(NULL, MSTPCR1, 10, 0),
- [MSTP109] = SH_CLK_MSTP32(NULL, MSTPCR1, 9, 0),
- [MSTP108] = SH_CLK_MSTP32(NULL, MSTPCR1, 8, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
- [MSTP103] = SH_CLK_MSTP32(NULL, MSTPCR1, 3, 0),
- [MSTP102] = SH_CLK_MSTP32(NULL, MSTPCR1, 2, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
- CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
- CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
- CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
- CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
- CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
- CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
- CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]),
- CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
- CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP010]),
- CLKDEV_ICK_ID("fck", "sh-tmu.3", &mstp_clks[MSTP011]),
-
- CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]),
- CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP112]),
- CLKDEV_CON_ID("pcie2_fck", &mstp_clks[MSTP110]),
- CLKDEV_CON_ID("pcie1_fck", &mstp_clks[MSTP109]),
- CLKDEV_CON_ID("pcie0_fck", &mstp_clks[MSTP108]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
- CLKDEV_CON_ID("du_fck", &mstp_clks[MSTP103]),
- CLKDEV_CON_ID("ether_fck", &mstp_clks[MSTP102]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
deleted file mode 100644
index 6c7b6ab6cab5a6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-shx3.c
- *
- * SH-X3 support for the clock framework
- *
- * Copyright (C) 2006-2007 Renesas Technology Corp.
- * Copyright (C) 2006-2007 Renesas Solutions Corp.
- * Copyright (C) 2006-2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 16666666,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- /* PLL1 has a fixed x72 multiplier. */
- return clk->parent->rate * 72;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static struct clk *clks[] = {
- &extal_clk,
- &pll_clk,
-};
-
-static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
- 24, 32, 36, 48 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_SHA, DIV4_P, DIV4_NR };
-
-#define DIV4(_bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
-
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_P] = DIV4(0, 0x0f80, 0),
- [DIV4_SHA] = DIV4(4, 0x0ff0, 0),
- [DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
- [DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
- [DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
-};
-
-#define MSTPCR0 0xffc00030
-#define MSTPCR1 0xffc00034
-
-enum { MSTP027, MSTP026, MSTP025, MSTP024,
- MSTP009, MSTP008, MSTP003, MSTP002,
- MSTP001, MSTP000, MSTP119, MSTP105,
- MSTP104, MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- /* MSTPCR0 */
- [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
- [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
- [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
- [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
- [MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
- [MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
- [MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
- [MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
- [MSTP001] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
- [MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
-
- /* MSTPCR1 */
- [MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
- [MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
- [MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
- CLKDEV_CON_ID("shywaya_clk", &div4_clks[DIV4_SHA]),
- CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
- CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
- CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP32 clocks */
- CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
- CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
- CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
- CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
-
- CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
- CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
- CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]),
- CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]),
-
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]),
-
- CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
- CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
- CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
-};
-
-int __init arch_clk_init(void)
-{
- int i, ret = 0;
-
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- ret |= clk_register(clks[i]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
- &div4_table);
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4a/intc-shx3.c b/arch/sh/kernel/cpu/sh4a/intc-shx3.c
deleted file mode 100644
index eea87d25efbb3f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/intc-shx3.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Shared support for SH-X3 interrupt controllers.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/init.h>
-
-#define INTACK 0xfe4100b8
-#define INTACKCLR 0xfe4100bc
-#define INTC_USERIMASK 0xfe411000
-
-#ifdef CONFIG_INTC_BALANCING
-unsigned int irq_lookup(unsigned int irq)
-{
- return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
-}
-
-void irq_finish(unsigned int irq)
-{
- __raw_writel(irq2evt(irq), INTACKCLR);
-}
-#endif
-
-static int __init shx3_irq_setup(void)
-{
- return register_intc_userimask(INTC_USERIMASK);
-}
-arch_initcall(shx3_irq_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
deleted file mode 100644
index 3beb8fed3d289d..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/perf_event.c
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance events support for SH-4A performance counters
- *
- * Copyright (C) 2009, 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <asm/processor.h>
-
-#define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx))
-#define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx))
-
-#define CCBR_CIT_MASK (0x7ff << 6)
-#define CCBR_DUC (1 << 3)
-#define CCBR_CMDS (1 << 1)
-#define CCBR_PPCE (1 << 0)
-
-#ifdef CONFIG_CPU_SHX3
-/*
- * The PMCAT location for SH-X3 CPUs was quietly moved, while the CCBR
- * and PMCTR locations remains tentatively constant. This change remains
- * wholly undocumented, and was simply found through trial and error.
- *
- * Early cuts of SH-X3 still appear to use the SH-X/SH-X2 locations, and
- * it's unclear when this ceased to be the case. For now we always use
- * the new location (if future parts keep up with this trend then
- * scanning for them at runtime also remains a viable option.)
- *
- * The gap in the register space also suggests that there are other
- * undocumented counters, so this will need to be revisited at a later
- * point in time.
- */
-#define PPC_PMCAT 0xfc100240
-#else
-#define PPC_PMCAT 0xfc100080
-#endif
-
-#define PMCAT_OVF3 (1 << 27)
-#define PMCAT_CNN3 (1 << 26)
-#define PMCAT_CLR3 (1 << 25)
-#define PMCAT_OVF2 (1 << 19)
-#define PMCAT_CLR2 (1 << 17)
-#define PMCAT_OVF1 (1 << 11)
-#define PMCAT_CNN1 (1 << 10)
-#define PMCAT_CLR1 (1 << 9)
-#define PMCAT_OVF0 (1 << 3)
-#define PMCAT_CLR0 (1 << 1)
-
-static struct sh_pmu sh4a_pmu;
-
-/*
- * Supported raw event codes:
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x0000 number of elapsed cycles
- * 0x0200 number of elapsed cycles in privileged mode
- * 0x0280 number of elapsed cycles while SR.BL is asserted
- * 0x0202 instruction execution
- * 0x0203 instruction execution in parallel
- * 0x0204 number of unconditional branches
- * 0x0208 number of exceptions
- * 0x0209 number of interrupts
- * 0x0220 UTLB miss caused by instruction fetch
- * 0x0222 UTLB miss caused by operand access
- * 0x02a0 number of ITLB misses
- * 0x0028 number of accesses to instruction memories
- * 0x0029 number of accesses to instruction cache
- * 0x002a instruction cache miss
- * 0x022e number of access to instruction X/Y memory
- * 0x0030 number of reads to operand memories
- * 0x0038 number of writes to operand memories
- * 0x0031 number of operand cache read accesses
- * 0x0039 number of operand cache write accesses
- * 0x0032 operand cache read miss
- * 0x003a operand cache write miss
- * 0x0236 number of reads to operand X/Y memory
- * 0x023e number of writes to operand X/Y memory
- * 0x0237 number of reads to operand U memory
- * 0x023f number of writes to operand U memory
- * 0x0337 number of U memory read buffer misses
- * 0x02b4 number of wait cycles due to operand read access
- * 0x02bc number of wait cycles due to operand write access
- * 0x0033 number of wait cycles due to operand cache read miss
- * 0x003b number of wait cycles due to operand cache write miss
- */
-
-/*
- * Special reserved bits used by hardware emulators, read values will
- * vary, but writes must always be 0.
- */
-#define PMCAT_EMU_CLR_MASK ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
-
-static const int sh4a_general_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0000,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x0202,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0029, /* I-cache */
- [PERF_COUNT_HW_CACHE_MISSES] = 0x002a, /* I-cache */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0204,
- [PERF_COUNT_HW_BRANCH_MISSES] = -1,
- [PERF_COUNT_HW_BUS_CYCLES] = -1,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static const int sh4a_cache_events
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0031,
- [ C(RESULT_MISS) ] = 0x0032,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0039,
- [ C(RESULT_MISS) ] = 0x003a,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(L1I) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0029,
- [ C(RESULT_MISS) ] = 0x002a,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(LL) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0030,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0038,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0222,
- [ C(RESULT_MISS) ] = 0x0220,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0,
- },
- },
-
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0,
- [ C(RESULT_MISS) ] = 0x02a0,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(BPU) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-
- [ C(NODE) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static int sh4a_event_map(int event)
-{
- return sh4a_general_events[event];
-}
-
-static u64 sh4a_pmu_read(int idx)
-{
- return __raw_readl(PPC_PMCTR(idx));
-}
-
-static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
- __raw_writel(tmp, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(PPC_PMCAT);
- tmp &= ~PMCAT_EMU_CLR_MASK;
- tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
- __raw_writel(tmp, PPC_PMCAT);
-
- tmp = __raw_readl(PPC_CCBR(idx));
- tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
- __raw_writel(tmp, PPC_CCBR(idx));
-
- __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
-}
-
-static void sh4a_pmu_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
-}
-
-static void sh4a_pmu_enable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_pmu.num_events; i++)
- __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
-}
-
-static struct sh_pmu sh4a_pmu = {
- .name = "sh4a",
- .num_events = 2,
- .event_map = sh4a_event_map,
- .max_events = ARRAY_SIZE(sh4a_general_events),
- .raw_event_mask = 0x3ff,
- .cache_events = &sh4a_cache_events,
- .read = sh4a_pmu_read,
- .disable = sh4a_pmu_disable,
- .enable = sh4a_pmu_enable,
- .disable_all = sh4a_pmu_disable_all,
- .enable_all = sh4a_pmu_enable_all,
-};
-
-static int __init sh4a_pmu_init(void)
-{
- /*
- * Make sure this CPU actually has perf counters.
- */
- if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
- pr_notice("HW perf events unsupported, software events only.\n");
- return -ENODEV;
- }
-
- return register_sh_pmu(&sh4a_pmu);
-}
-early_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
deleted file mode 100644
index 0dd5312f930b1e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7722_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405018f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7722", sh7722_pfc_resources,
- ARRAY_SIZE(sh7722_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
deleted file mode 100644
index b67abc0637a487..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7723_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7723", sh7723_pfc_resources,
- ARRAY_SIZE(sh7723_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
deleted file mode 100644
index b43c3259060bbe..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7724_pfc_resources[] = {
- [0] = {
- .start = 0xa4050100,
- .end = 0xa405016f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7724", sh7724_pfc_resources,
- ARRAY_SIZE(sh7724_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
deleted file mode 100644
index 46256b19619a79..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7734_pfc_resources[] = {
- [0] = { /* PFC */
- .start = 0xFFFC0000,
- .end = 0xFFFC011C,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* GPIO */
- .start = 0xFFC40000,
- .end = 0xFFC4502B,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7734", sh7734_pfc_resources,
- ARRAY_SIZE(sh7734_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
deleted file mode 100644
index c92f304cb4bad1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7757_pfc_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7757", sh7757_pfc_resources,
- ARRAY_SIZE(sh7757_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
deleted file mode 100644
index f329de6e758a4f..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7785_pfc_resources[] = {
- [0] = {
- .start = 0xffe70000,
- .end = 0xffe7008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7785", sh7785_pfc_resources,
- ARRAY_SIZE(sh7785_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
deleted file mode 100644
index 47e8639f3e71b1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource sh7786_pfc_resources[] = {
- [0] = {
- .start = 0xffcc0000,
- .end = 0xffcc008f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-sh7786", sh7786_pfc_resources,
- ARRAY_SIZE(sh7786_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c b/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
deleted file mode 100644
index 6c02f625646754..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/pinmux-shx3.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <cpu/pfc.h>
-
-static struct resource shx3_pfc_resources[] = {
- [0] = {
- .start = 0xffc70000,
- .end = 0xffc7001f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int __init plat_pinmux_setup(void)
-{
- return sh_pfc_register("pfc-shx3", shx3_pfc_resources,
- ARRAY_SIZE(shx3_pfc_resources));
-}
-arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
deleted file mode 100644
index 6ecc8b6e133c69..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/serial_sci.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#define PSCR 0xA405011E
-
-static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag)
-{
- unsigned short data;
-
- if (port->mapbase == 0xffe00000) {
- data = __raw_readw(PSCR);
- data &= ~0x03cf;
- if (!(cflag & CRTSCTS))
- data |= 0x0340;
-
- __raw_writew(data, PSCR);
- }
-}
-
-struct plat_sci_port_ops sh7722_sci_port_ops = {
- .init_pins = sh7722_sci_init_pins,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
deleted file mode 100644
index b6015188fab1f1..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7343 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_CKE1,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc60)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x780),
- .end = evt2irq(0x7e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7343_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
-};
-
-static int __init sh7343_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7343_devices,
- ARRAY_SIZE(sh7343_devices));
-}
-arch_initcall(sh7343_devices_setup);
-
-static struct platform_device *sh7343_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7343_early_devices,
- ARRAY_SIZE(sh7343_early_devices));
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, TPU, Z3D4, USBI0, USBI1,
- MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF, SCIF1, SCIF2, SCIF3,
- SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
- IRDA, SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- JPU, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, USB,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
- INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
- INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
- INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
- INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
- INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
- INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
- INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
- INTC_GROUP(USB, USBI0, USBI1),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7343",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
deleted file mode 100644
index 6676beef053e59..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7366 Setup
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/r8a66597.h>
-#include <asm/clock.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(usb_host_resources),
- .resource = usb_host_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU(1)",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU(2)",
- .start = 0xfe924000,
- .end = 0xfe9240b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh7366_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
- &iic_device,
- &usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7366_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7366_devices,
- ARRAY_SIZE(sh7366_devices));
-}
-arch_initcall(sh7366_devices_setup);
-
-static struct platform_device *sh7366_early_devices[] __initdata = {
- &scif0_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7366_early_devices,
- ARRAY_SIZE(sh7366_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- ICB,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- MFI, VPU, USB,
- MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
- DMAC4, DMAC5, DMAC_DADERR,
- SCIF, SCIFA1, SCIFA2,
- DENC, MSIOF,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI, CMT, TSIF, SIU,
- TMU0, TMU1, TMU2,
- VEU2, LCDC,
-
- /* interrupt groups */
-
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(ICB, 0x700),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
- INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
- INTC_VECT(MMC_MMC3I, 0xb40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0),
- INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
- INTC_VECT(SCIFA2, 0xc40),
- INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440),
- INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, 0, 0, 0, MFI } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { 0, 0, 0, ICB } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, 0, 0, 0, 0, MSIOF } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, 0, 0, 0, 0, 0, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7366",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* TODO: Register Node 1 */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
deleted file mode 100644
index 0c6757ef63f42c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ /dev/null
@@ -1,666 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7722 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/m66592.h>
-
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/siu.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7722.h>
-#include <cpu/serial.h>
-
-static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_TX,
- .addr = 0xa454c098,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb1,
- }, {
- .slave_id = SHDMA_SLAVE_SIUA_RX,
- .addr = 0xa454c090,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb2,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_TX,
- .addr = 0xa454c09c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb5,
- }, {
- .slave_id = SHDMA_SLAVE_SIUB_RX,
- .addr = 0xa454c094,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xb6,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_channel sh7722_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7722_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7722_dmae_slaves),
- .channel = sh7722_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7722_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7722_dmae_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device dma_device = {
- .name = "sh-dma-engine",
- .id = -1,
- .resource = sh7722_dmae_resources,
- .num_resources = ARRAY_SIZE(sh7722_dmae_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .ops = &sh7722_sci_port_ops,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0x7a0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0x780),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct m66592_platdata usbf_platdata = {
- .on_chip = 1,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .name = "USBF",
- .start = 0x04480000,
- .end = 0x044800FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "m66592_udc",
- .id = 0, /* "usbf0" clock */
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbf_platdata,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU4",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe9022eb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu_platform_data = {
- .name = "VEU",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu_resources[] = {
- [0] = {
- .name = "VEU",
- .start = 0xfe920000,
- .end = 0xfe9200b7,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu_platform_data,
- },
- .resource = veu_resources,
- .num_resources = ARRAY_SIZE(veu_resources),
-};
-
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfea00000,
- .end = 0xfea102d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct siu_platform siu_platform_data = {
- .dma_slave_tx_a = SHDMA_SLAVE_SIUA_TX,
- .dma_slave_rx_a = SHDMA_SLAVE_SIUA_RX,
- .dma_slave_tx_b = SHDMA_SLAVE_SIUB_TX,
- .dma_slave_rx_b = SHDMA_SLAVE_SIUB_RX,
-};
-
-static struct resource siu_resources[] = {
- [0] = {
- .start = 0xa4540000,
- .end = 0xa454c10f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xf80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device siu_device = {
- .name = "siu-pcm-audio",
- .id = -1,
- .dev = {
- .platform_data = &siu_platform_data,
- },
- .resource = siu_resources,
- .num_resources = ARRAY_SIZE(siu_resources),
-};
-
-static struct platform_device *sh7722_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
- &rtc_device,
- &usbf_device,
- &iic_device,
- &vpu_device,
- &veu_device,
- &jpu_device,
- &siu_device,
- &dma_device,
-};
-
-static int __init sh7722_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
- platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
-
- return platform_add_devices(sh7722_devices,
- ARRAY_SIZE(sh7722_devices));
-}
-arch_initcall(sh7722_devices_setup);
-
-static struct platform_device *sh7722_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &cmt_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7722_early_devices,
- ARRAY_SIZE(sh7722_early_devices));
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC0, DMAC1, DMAC2, DMAC3,
- VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
- VPU, TPU,
- USB_USBI0, USB_USBI1,
- DMAC4, DMAC5, DMAC_DADERR,
- KEYSC,
- SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
- FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
- I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- CMT, TSIF, SIU, TWODG,
- TMU0, TMU1, TMU2,
- IRDA, JPU, LCDC,
-
- /* interrupt groups */
- SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
- INTC_VECT(SIM_ERI, 0x700), INTC_VECT(SIM_RXI, 0x720),
- INTC_VECT(SIM_TXI, 0x740), INTC_VECT(SIM_TEI, 0x760),
- INTC_VECT(RTC_ATI, 0x780), INTC_VECT(RTC_PRI, 0x7a0),
- INTC_VECT(RTC_CUI, 0x7c0),
- INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
- INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
- INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
- INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
- INTC_VECT(VPU, 0x980), INTC_VECT(TPU, 0x9a0),
- INTC_VECT(USB_USBI0, 0xa20), INTC_VECT(USB_USBI1, 0xa40),
- INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
- INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
- INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20),
- INTC_VECT(SCIF2, 0xc40), INTC_VECT(SIOF0, 0xc80),
- INTC_VECT(SIOF1, 0xca0), INTC_VECT(SIO, 0xd00),
- INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
- INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
- INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
- INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
- INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
- INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
- INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(IRDA, 0x480),
- INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
- INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
- INTC_GROUP(USB, USB_USBI0, USB_USBI1),
- INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
- FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
- INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC_DADERR, DMAC5, DMAC4, 0, SCIF2, SCIF1, SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, 0, SIO, 0, 0, SIOF1, SIOF0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, RTC_CUI, RTC_PRI, RTC_ATI, 0, TPU, 0, TSIF } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7722",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
deleted file mode 100644
index 83ae1ad4a86e86..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Setup
- *
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7723.h>
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct uio_info vpu_platform_data = {
- .name = "VPU5",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-static struct uio_info veu0_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU2H0",
- .start = 0xfe920000,
- .end = 0xfe92027b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-static struct uio_info veu1_platform_data = {
- .name = "VEU2H",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU2H1",
- .start = 0xfe924000,
- .end = 0xfe92427b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct r8a66597_platdata r8a66597_data = {
- .on_chip = 1,
-};
-
-static struct resource sh7723_usb_host_resources[] = {
- [0] = {
- .start = 0xa4d80000,
- .end = 0xa4d800ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xa20),
- .end = evt2irq(0xa20),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct platform_device sh7723_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &r8a66597_data,
- },
- .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
- .resource = sh7723_usb_host_resources,
-};
-
-static struct resource iic_resources[] = {
- [0] = {
- .name = "IIC",
- .start = 0x04470000,
- .end = 0x04470017,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic_resources),
- .resource = iic_resources,
-};
-
-static struct platform_device *sh7723_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &iic_device,
- &sh7723_usb_host_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
-};
-
-static int __init sh7723_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
-
- return platform_add_devices(sh7723_devices,
- ARRAY_SIZE(sh7723_devices));
-}
-arch_initcall(sh7723_devices_setup);
-
-static struct platform_device *sh7723_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7723_early_devices,
- ARRAY_SIZE(sh7723_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED=0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
- _2DG_TRI,_2DG_INI,_2DG_CEI,
- DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
- VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
- SCIFA_SCIFA0,
- VPU_VPUI,
- TPU_TPUI,
- ADC_ADI,
- USB_USI0,
- RTC_ATI,RTC_PRI,RTC_CUI,
- DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
- DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
- KEYSC_KEYI,
- SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
- MSIOF_MSIOFI0,MSIOF_MSIOFI1,
- SCIFA_SCIFA1,
- FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
- I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
- CMT_CMTI,
- TSIF_TSIFI,
- SIU_SIUI,
- SCIFA_SCIFA2,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA_IRDAI,
- ATAPI_ATAPII,
- VEU2H1_VEU2HI,
- LCDC_LCDCI,
- TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
- SDHI1, RTC, DMAC1B, SDHI0,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0,0x700),
- INTC_VECT(DMAC1A_DEI1,0x720),
- INTC_VECT(DMAC1A_DEI2,0x740),
- INTC_VECT(DMAC1A_DEI3,0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0,0x800),
- INTC_VECT(DMAC0A_DEI1,0x820),
- INTC_VECT(DMAC0A_DEI2,0x840),
- INTC_VECT(DMAC0A_DEI3,0x860),
-
- INTC_VECT(VIO_CEUI,0x880),
- INTC_VECT(VIO_BEUI,0x8A0),
- INTC_VECT(VIO_VEU2HI,0x8C0),
- INTC_VECT(VIO_VOUI,0x8E0),
-
- INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x980),
- INTC_VECT(TPU_TPUI,0x9A0),
- INTC_VECT(ADC_ADI,0x9E0),
- INTC_VECT(USB_USI0,0xA20),
-
- INTC_VECT(RTC_ATI,0xA80),
- INTC_VECT(RTC_PRI,0xAA0),
- INTC_VECT(RTC_CUI,0xAC0),
-
- INTC_VECT(DMAC1B_DEI4,0xB00),
- INTC_VECT(DMAC1B_DEI5,0xB20),
- INTC_VECT(DMAC1B_DADERR,0xB40),
-
- INTC_VECT(DMAC0B_DEI4,0xB80),
- INTC_VECT(DMAC0B_DEI5,0xBA0),
- INTC_VECT(DMAC0B_DADERR,0xBC0),
-
- INTC_VECT(KEYSC_KEYI,0xBE0),
- INTC_VECT(SCIF_SCIF0,0xC00),
- INTC_VECT(SCIF_SCIF1,0xC20),
- INTC_VECT(SCIF_SCIF2,0xC40),
- INTC_VECT(MSIOF_MSIOFI0,0xC80),
- INTC_VECT(MSIOF_MSIOFI1,0xCA0),
- INTC_VECT(SCIFA_SCIFA1,0xD00),
-
- INTC_VECT(FLCTL_FLSTEI,0xD80),
- INTC_VECT(FLCTL_FLTENDI,0xDA0),
- INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
- INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
-
- INTC_VECT(I2C_ALI,0xE00),
- INTC_VECT(I2C_TACKI,0xE20),
- INTC_VECT(I2C_WAITI,0xE40),
- INTC_VECT(I2C_DTEI,0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
-
- INTC_VECT(CMT_CMTI,0xF00),
- INTC_VECT(TSIF_TSIFI,0xF20),
- INTC_VECT(SIU_SIUI,0xF80),
- INTC_VECT(SCIFA_SCIFA2,0xFA0),
-
- INTC_VECT(TMU0_TUNI0,0x400),
- INTC_VECT(TMU0_TUNI1,0x420),
- INTC_VECT(TMU0_TUNI2,0x440),
-
- INTC_VECT(IRDA_IRDAI,0x480),
- INTC_VECT(ATAPI_ATAPII,0x4A0),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(VEU2H1_VEU2HI,0x560),
- INTC_VECT(LCDC_LCDCI,0x580),
-
- INTC_VECT(TMU1_TUNI0,0x920),
- INTC_VECT(TMU1_TUNI1,0x940),
- INTC_VECT(TMU1_TUNI2,0x960),
-
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
- INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
- INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
- INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
- INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
- INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
- FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { 0, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA_SCIFA2, SIU_SIUI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7723",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
deleted file mode 100644
index 0d990ab1ba2a9e..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ /dev/null
@@ -1,1288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Setup
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Setup
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/serial_sci.h>
-#include <linux/uio_driver.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/notifier.h>
-
-#include <asm/suspend.h>
-#include <asm/clock.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-#include <cpu/dma-register.h>
-#include <cpu/sh7724.h>
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF0_TX,
- .addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF0_RX,
- .addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_TX,
- .addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x25,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF1_RX,
- .addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x26,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0xa4e30020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2d,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0xa4e30024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2e,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0xa4e40020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x31,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0xa4e40024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x32,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_TX,
- .addr = 0xa4e50020,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x35,
- }, {
- .slave_id = SHDMA_SLAVE_SCIF5_RX,
- .addr = 0xa4e50024,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x36,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_TX,
- .addr = 0xA4D80100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D0_RX,
- .addr = 0xA4D80100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x73,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_TX,
- .addr = 0xA4D80120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB0D1_RX,
- .addr = 0xA4D80120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0x77,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_TX,
- .addr = 0xA4D90100,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D0_RX,
- .addr = 0xA4D90100,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xab,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_TX,
- .addr = 0xA4D90120,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_USB1D1_RX,
- .addr = 0xA4D90120,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xaf,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_TX,
- .addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI0_RX,
- .addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_TX,
- .addr = 0x04cf0030,
- .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc9,
- }, {
- .slave_id = SHDMA_SLAVE_SDHI1_RX,
- .addr = 0x04cf0030,
- .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xca,
- },
-};
-
-static const struct sh_dmae_channel sh7724_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
- .slave = sh7724_dmae_slaves,
- .slave_num = ARRAY_SIZE(sh7724_dmae_slaves),
- .channel = sh7724_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7724_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xbc0),
- .end = evt2irq(0xbc0),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x800),
- .end = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb80),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* Resource order important! */
-static struct resource sh7724_dmae1_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfdc08020,
- .end = 0xfdc0808f,
- .flags = IORESOURCE_MEM,
- },
- {
- /* DMARSx */
- .start = 0xfdc09000,
- .end = 0xfdc0900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0xb40),
- .end = evt2irq(0xb40),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 0-3 */
- .start = evt2irq(0x700),
- .end = evt2irq(0x760),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 4-5 */
- .start = evt2irq(0xb00),
- .end = evt2irq(0xb20),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7724_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae0_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7724_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7724_dmae1_resources),
- .dev = {
- .platform_data = &dma_platform_data,
- },
-};
-
-/* Serial */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc00)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc20)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe20000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xc40)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xa4e30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xa4e40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xd00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .sampling_rate = 8,
- .type = PORT_SCIFA,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xa4e50000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xfa0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xa465fec0,
- .end = 0xa465fec0 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = evt2irq(0xaa0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = evt2irq(0xac0),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = evt2irq(0xa80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C0 */
-static struct resource iic0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0x04470000,
- .end = 0x04470018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xe00),
- .end = evt2irq(0xe60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic0_device = {
- .name = "i2c-sh_mobile",
- .id = 0, /* "i2c0" clock */
- .num_resources = ARRAY_SIZE(iic0_resources),
- .resource = iic0_resources,
-};
-
-/* I2C1 */
-static struct resource iic1_resources[] = {
- [0] = {
- .name = "IIC1",
- .start = 0x04750000,
- .end = 0x04750018 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xd80),
- .end = evt2irq(0xde0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device iic1_device = {
- .name = "i2c-sh_mobile",
- .id = 1, /* "i2c1" clock */
- .num_resources = ARRAY_SIZE(iic1_resources),
- .resource = iic1_resources,
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
- .name = "VPU5F",
- .version = "0",
- .irq = evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
- [0] = {
- .name = "VPU",
- .start = 0xfe900000,
- .end = 0xfe902807,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device vpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 0,
- .dev = {
- .platform_data = &vpu_platform_data,
- },
- .resource = vpu_resources,
- .num_resources = ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
- .name = "VEU3F0",
- .version = "0",
- .irq = evt2irq(0xc60),
-};
-
-static struct resource veu0_resources[] = {
- [0] = {
- .name = "VEU3F0",
- .start = 0xfe920000,
- .end = 0xfe9200cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 1,
- .dev = {
- .platform_data = &veu0_platform_data,
- },
- .resource = veu0_resources,
- .num_resources = ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
- .name = "VEU3F1",
- .version = "0",
- .irq = evt2irq(0x8c0),
-};
-
-static struct resource veu1_resources[] = {
- [0] = {
- .name = "VEU3F1",
- .start = 0xfe924000,
- .end = 0xfe9240cb,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device veu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 2,
- .dev = {
- .platform_data = &veu1_platform_data,
- },
- .resource = veu1_resources,
- .num_resources = ARRAY_SIZE(veu1_resources),
-};
-
-/* BEU0 */
-static struct uio_info beu0_platform_data = {
- .name = "BEU0",
- .version = "0",
- .irq = evt2irq(0x8A0),
-};
-
-static struct resource beu0_resources[] = {
- [0] = {
- .name = "BEU0",
- .start = 0xfe930000,
- .end = 0xfe933400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 6,
- .dev = {
- .platform_data = &beu0_platform_data,
- },
- .resource = beu0_resources,
- .num_resources = ARRAY_SIZE(beu0_resources),
-};
-
-/* BEU1 */
-static struct uio_info beu1_platform_data = {
- .name = "BEU1",
- .version = "0",
- .irq = evt2irq(0xA00),
-};
-
-static struct resource beu1_resources[] = {
- [0] = {
- .name = "BEU1",
- .start = 0xfe940000,
- .end = 0xfe943400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device beu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 7,
- .dev = {
- .platform_data = &beu1_platform_data,
- },
- .resource = beu1_resources,
- .num_resources = ARRAY_SIZE(beu1_resources),
-};
-
-static struct sh_timer_config cmt_platform_data = {
- .channels_mask = 0x20,
-};
-
-static struct resource cmt_resources[] = {
- DEFINE_RES_MEM(0x044a0000, 0x70),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device cmt_device = {
- .name = "sh-cmt-32",
- .id = 0,
- .dev = {
- .platform_data = &cmt_platform_data,
- },
- .resource = cmt_resources,
- .num_resources = ARRAY_SIZE(cmt_resources),
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd90000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x920)),
- DEFINE_RES_IRQ(evt2irq(0x940)),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
- .name = "JPU",
- .version = "0",
- .irq = evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
- [0] = {
- .name = "JPU",
- .start = 0xfe980000,
- .end = 0xfe9902d3,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device jpu_device = {
- .name = "uio_pdrv_genirq",
- .id = 3,
- .dev = {
- .platform_data = &jpu_platform_data,
- },
- .resource = jpu_resources,
- .num_resources = ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
- .name = "SPU2DSP0",
- .version = "0",
- .irq = evt2irq(0xcc0),
-};
-
-static struct resource spu0_resources[] = {
- [0] = {
- .name = "SPU2DSP0",
- .start = 0xFE200000,
- .end = 0xFE2FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu0_device = {
- .name = "uio_pdrv_genirq",
- .id = 4,
- .dev = {
- .platform_data = &spu0_platform_data,
- },
- .resource = spu0_resources,
- .num_resources = ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
- .name = "SPU2DSP1",
- .version = "0",
- .irq = evt2irq(0xce0),
-};
-
-static struct resource spu1_resources[] = {
- [0] = {
- .name = "SPU2DSP1",
- .start = 0xFE300000,
- .end = 0xFE3FFFFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device spu1_device = {
- .name = "uio_pdrv_genirq",
- .id = 5,
- .dev = {
- .platform_data = &spu1_platform_data,
- },
- .resource = spu1_resources,
- .num_resources = ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7724_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
- &rtc_device,
- &iic0_device,
- &iic1_device,
- &vpu_device,
- &veu0_device,
- &veu1_device,
- &beu0_device,
- &beu1_device,
- &jpu_device,
- &spu0_device,
- &spu1_device,
-};
-
-static int __init sh7724_devices_setup(void)
-{
- platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
- platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
- platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
- platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
- platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
- platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
-
- return platform_add_devices(sh7724_devices,
- ARRAY_SIZE(sh7724_devices));
-}
-arch_initcall(sh7724_devices_setup);
-
-static struct platform_device *sh7724_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &cmt_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7724_early_devices,
- ARRAY_SIZE(sh7724_early_devices));
-}
-
-#define RAMCR_CACHE_L2FC 0x0002
-#define RAMCR_CACHE_L2E 0x0001
-#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-
-void l2_cache_init(void)
-{
- /* Enable L2 cache */
- __raw_writel(L2_CACHE_ENABLE, RAMCR);
-}
-
-enum {
- UNUSED = 0,
- ENABLED,
- DISABLED,
-
- /* interrupt sources */
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- HUDI,
- DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
- _2DG_TRI, _2DG_INI, _2DG_CEI,
- DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
- VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU,
- SCIFA3,
- VPU,
- TPU,
- CEU1,
- BEU1,
- USB0, USB1,
- ATAPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
- DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
- KEYSC,
- SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
- VEU0,
- MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- SPU_SPUI0, SPU_SPUI1,
- SCIFA4,
- ICB,
- ETHI,
- I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
- I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
- CMT,
- TSIF,
- FSI,
- SCIFA5,
- TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
- IRDA,
- JPU,
- _2DDMAC,
- MMC_MMC2I, MMC_MMC3I,
- LCDC,
- TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
-
- /* interrupt groups */
- DMAC1A, _2DG, DMAC0A, VIO, USB, RTC,
- DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMCIF,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
- INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
- INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
- INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
-
- INTC_VECT(DMAC1A_DEI0, 0x700),
- INTC_VECT(DMAC1A_DEI1, 0x720),
- INTC_VECT(DMAC1A_DEI2, 0x740),
- INTC_VECT(DMAC1A_DEI3, 0x760),
-
- INTC_VECT(_2DG_TRI, 0x780),
- INTC_VECT(_2DG_INI, 0x7A0),
- INTC_VECT(_2DG_CEI, 0x7C0),
-
- INTC_VECT(DMAC0A_DEI0, 0x800),
- INTC_VECT(DMAC0A_DEI1, 0x820),
- INTC_VECT(DMAC0A_DEI2, 0x840),
- INTC_VECT(DMAC0A_DEI3, 0x860),
-
- INTC_VECT(VIO_CEU0, 0x880),
- INTC_VECT(VIO_BEU0, 0x8A0),
- INTC_VECT(VIO_VEU1, 0x8C0),
- INTC_VECT(VIO_VOU, 0x8E0),
-
- INTC_VECT(SCIFA3, 0x900),
- INTC_VECT(VPU, 0x980),
- INTC_VECT(TPU, 0x9A0),
- INTC_VECT(CEU1, 0x9E0),
- INTC_VECT(BEU1, 0xA00),
- INTC_VECT(USB0, 0xA20),
- INTC_VECT(USB1, 0xA40),
- INTC_VECT(ATAPI, 0xA60),
-
- INTC_VECT(RTC_ATI, 0xA80),
- INTC_VECT(RTC_PRI, 0xAA0),
- INTC_VECT(RTC_CUI, 0xAC0),
-
- INTC_VECT(DMAC1B_DEI4, 0xB00),
- INTC_VECT(DMAC1B_DEI5, 0xB20),
- INTC_VECT(DMAC1B_DADERR, 0xB40),
-
- INTC_VECT(DMAC0B_DEI4, 0xB80),
- INTC_VECT(DMAC0B_DEI5, 0xBA0),
- INTC_VECT(DMAC0B_DADERR, 0xBC0),
-
- INTC_VECT(KEYSC, 0xBE0),
- INTC_VECT(SCIF_SCIF0, 0xC00),
- INTC_VECT(SCIF_SCIF1, 0xC20),
- INTC_VECT(SCIF_SCIF2, 0xC40),
- INTC_VECT(VEU0, 0xC60),
- INTC_VECT(MSIOF_MSIOFI0, 0xC80),
- INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
- INTC_VECT(SPU_SPUI0, 0xCC0),
- INTC_VECT(SPU_SPUI1, 0xCE0),
- INTC_VECT(SCIFA4, 0xD00),
-
- INTC_VECT(ICB, 0xD20),
- INTC_VECT(ETHI, 0xD60),
-
- INTC_VECT(I2C1_ALI, 0xD80),
- INTC_VECT(I2C1_TACKI, 0xDA0),
- INTC_VECT(I2C1_WAITI, 0xDC0),
- INTC_VECT(I2C1_DTEI, 0xDE0),
-
- INTC_VECT(I2C0_ALI, 0xE00),
- INTC_VECT(I2C0_TACKI, 0xE20),
- INTC_VECT(I2C0_WAITI, 0xE40),
- INTC_VECT(I2C0_DTEI, 0xE60),
-
- INTC_VECT(SDHI0, 0xE80),
- INTC_VECT(SDHI0, 0xEA0),
- INTC_VECT(SDHI0, 0xEC0),
- INTC_VECT(SDHI0, 0xEE0),
-
- INTC_VECT(CMT, 0xF00),
- INTC_VECT(TSIF, 0xF20),
- INTC_VECT(FSI, 0xF80),
- INTC_VECT(SCIFA5, 0xFA0),
-
- INTC_VECT(TMU0_TUNI0, 0x400),
- INTC_VECT(TMU0_TUNI1, 0x420),
- INTC_VECT(TMU0_TUNI2, 0x440),
-
- INTC_VECT(IRDA, 0x480),
-
- INTC_VECT(SDHI1, 0x4E0),
- INTC_VECT(SDHI1, 0x500),
- INTC_VECT(SDHI1, 0x520),
-
- INTC_VECT(JPU, 0x560),
- INTC_VECT(_2DDMAC, 0x4A0),
-
- INTC_VECT(MMC_MMC2I, 0x5A0),
- INTC_VECT(MMC_MMC3I, 0x5C0),
-
- INTC_VECT(LCDC, 0xF40),
-
- INTC_VECT(TMU1_TUNI0, 0x920),
- INTC_VECT(TMU1_TUNI1, 0x940),
- INTC_VECT(TMU1_TUNI2, 0x960),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
- INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI),
- INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
- INTC_GROUP(VIO, VIO_CEU0, VIO_BEU0, VIO_VEU1, VIO_VOU),
- INTC_GROUP(USB, USB0, USB1),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
- INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
- INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
- INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
- INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
- INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
- { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
- 0, ENABLED, ENABLED, ENABLED } },
- { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
- { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
- DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
- { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
- { 0, 0, 0, VPU, ATAPI, ETHI, 0, SCIFA3 } },
- { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
- { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
- SPU_SPUI1, SPU_SPUI0, BEU1, IRDA } },
- { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
- { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
- JPU, 0, 0, LCDC } },
- { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
- { KEYSC, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
- VEU0, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
- { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
- { 0, 0, ICB, SCIFA4,
- CEU1, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
- { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
- { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
- I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
- { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { DISABLED, ENABLED, ENABLED, ENABLED,
- 0, 0, SCIFA5, FSI } },
- { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
- { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
- { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
- { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
- 0, RTC_CUI, RTC_PRI, RTC_ATI } },
- { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
- { 0, _2DG_CEI, _2DG_INI, _2DG_TRI,
- 0, TPU, 0, TSIF } },
- { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
- { 0, 0, MMC_MMC3I, MMC_MMC2I, 0, 0, 0, _2DDMAC } },
- { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
- TMU0_TUNI2, IRDA } },
- { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, DMAC1A, BEU1 } },
- { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
- TMU1_TUNI2, SPU } },
- { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMCIF, 0, ATAPI } },
- { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA3, VPU } },
- { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC0B, USB, CMT } },
- { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
- SCIF_SCIF2, VEU0 } },
- { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
- I2C1, I2C0 } },
- { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA4, ICB, TSIF, _2DG } },
- { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU1, ETHI, FSI, SDHI1 } },
- { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, 0, SDHI0 } },
- { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA5, 0, TPU, _2DDMAC } },
- { 0xa4140010, 0, 32, 4, /* INTPRI00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xa414001c, 16, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xa4140024, 0, 8, /* INTREQ00 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_desc intc_desc __initdata = {
- .name = "sh7724",
- .force_enable = ENABLED,
- .force_disable = DISABLED,
- .hw = INTC_HW_DESC(vectors, groups, mask_registers,
- prio_registers, sense_registers, ack_registers),
-};
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-static struct {
- /* BSC */
- unsigned long mmselr;
- unsigned long cs0bcr;
- unsigned long cs4bcr;
- unsigned long cs5abcr;
- unsigned long cs5bbcr;
- unsigned long cs6abcr;
- unsigned long cs6bbcr;
- unsigned long cs4wcr;
- unsigned long cs5awcr;
- unsigned long cs5bwcr;
- unsigned long cs6awcr;
- unsigned long cs6bwcr;
- /* INTC */
- unsigned short ipra;
- unsigned short iprb;
- unsigned short iprc;
- unsigned short iprd;
- unsigned short ipre;
- unsigned short iprf;
- unsigned short iprg;
- unsigned short iprh;
- unsigned short ipri;
- unsigned short iprj;
- unsigned short iprk;
- unsigned short iprl;
- unsigned char imr0;
- unsigned char imr1;
- unsigned char imr2;
- unsigned char imr3;
- unsigned char imr4;
- unsigned char imr5;
- unsigned char imr6;
- unsigned char imr7;
- unsigned char imr8;
- unsigned char imr9;
- unsigned char imr10;
- unsigned char imr11;
- unsigned char imr12;
- /* RWDT */
- unsigned short rwtcnt;
- unsigned short rwtcsr;
- /* CPG */
- unsigned long irdaclk;
- unsigned long spuclk;
-} sh7724_rstandby_state;
-
-static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
- sh7724_rstandby_state.mmselr |= 0xa5a50000;
- sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
- sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
- sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
- sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
- sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
- sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
- sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
- sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
- sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
- sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
- sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
-
- /* INTC */
- sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
- sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
- sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
- sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
- sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
- sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
- sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
- sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
- sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
- sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
- sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
- sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
- sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
- sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
- sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
- sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
- sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
- sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
- sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
- sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
- sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
- sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
- sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
- sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
- sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
-
- /* RWDT */
- sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
- sh7724_rstandby_state.rwtcnt |= 0x5a00;
- sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
- sh7724_rstandby_state.rwtcsr |= 0xa500;
- __raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
-
- /* CPG */
- sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
- sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
- unsigned long flags, void *unused)
-{
- if (!(flags & SUSP_SH_RSTANDBY))
- return NOTIFY_DONE;
-
- /* BCR */
- __raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
- __raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
- __raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
- __raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
- __raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
- __raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
- __raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
- __raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
- __raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
- __raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
- __raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
- __raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
-
- /* INTC */
- __raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
- __raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
- __raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
- __raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
- __raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
- __raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
- __raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
- __raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
- __raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
- __raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
- __raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
- __raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
- __raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
- __raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
- __raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
- __raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
- __raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
- __raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
- __raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
- __raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
- __raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
- __raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
- __raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
- __raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
- __raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
-
- /* RWDT */
- __raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
- __raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
-
- /* CPG */
- __raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
- __raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block sh7724_pre_sleep_notifier = {
- .notifier_call = sh7724_pre_sleep_notifier_call,
- .priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
-};
-
-static struct notifier_block sh7724_post_sleep_notifier = {
- .notifier_call = sh7724_post_sleep_notifier_call,
- .priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
-};
-
-static int __init sh7724_sleep_setup(void)
-{
- atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
- &sh7724_pre_sleep_notifier);
-
- atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
- &sh7724_post_sleep_notifier);
- return 0;
-}
-arch_initcall(sh7724_sleep_setup);
-
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
deleted file mode 100644
index 9911da794358d0..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+++ /dev/null
@@ -1,621 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/setup-sh7734.c
- *
- * SH7734 Setup
- *
- * Copyright (C) 2011,2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2011,2012 Renesas Solutions Corp.
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/irq.h>
-#include <asm/platform_early.h>
-#include <cpu/sh7734.h>
-
-/* SCIF */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe41000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe42000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x900)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x920)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffe44000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x940)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffe43000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x960)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-/* RTC */
-static struct resource rtc_resources[] = {
- [0] = {
- .name = "rtc",
- .start = 0xFFFC5000,
- .end = 0xFFFC5000 + 0x26 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = evt2irq(0xC00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* I2C 0 */
-static struct resource i2c0_resources[] = {
- [0] = {
- .name = "IIC0",
- .start = 0xFFC70000,
- .end = 0xFFC7000A - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x860),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c0_device = {
- .name = "i2c-sh7734",
- .id = 0,
- .num_resources = ARRAY_SIZE(i2c0_resources),
- .resource = i2c0_resources,
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x500)),
- DEFINE_RES_IRQ(evt2irq(0x520)),
- DEFINE_RES_IRQ(evt2irq(0x540)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7734_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &rtc_device,
-};
-
-static struct platform_device *sh7734_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7734_early_devices,
- ARRAY_SIZE(sh7734_early_devices));
-}
-
-#define GROUP 0
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3,
- DU,
- TMU00, TMU10, TMU20, TMU21,
- TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU70, TMU80,
- RESET_WDT,
- USB,
- HUDI,
- SHDMAC,
- SSI0, SSI1, SSI2, SSI3,
- VIN0,
- RGPVG,
- _2DG,
- MMC,
- HSPI,
- LBSCATA,
- I2C0,
- RCAN0,
- MIMLB,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- LBSCDMAC0, LBSCDMAC1, LBSCDMAC2,
- RCAN1,
- SDHI0, SDHI1,
- IEBUS,
- HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22, HPBDMAC23_25_27_28,
- RTC,
- VIN1,
- LCDC,
- SRC0, SRC1,
- GETHER,
- SDHI2,
- GPIO0_3, GPIO4_5,
- STIF0, STIF1,
- ADMAC,
- HIF,
- FLCTL,
- ADC,
- MTU2,
- RSPI,
- QSPI,
- HSCIF,
- VEU3F_VE3,
-
- /* Group */
- /* Mask */
- STIF_M,
- GPIO_M,
- HPBDMAC_M,
- LBSCDMAC_M,
- RCAN_M,
- SRC_M,
- SCIF_M,
- LCDC_M,
- _2DG_M,
- VIN_M,
- TMU_3_M,
- TMU_0_M,
-
- /* Priority */
- RCAN_P,
- LBSCDMAC_P,
-
- /* Common */
- SDHI,
- SSI,
- SPI,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(DU, 0x3E0),
- INTC_VECT(TMU00, 0x400),
- INTC_VECT(TMU10, 0x420),
- INTC_VECT(TMU20, 0x440),
- INTC_VECT(TMU30, 0x480),
- INTC_VECT(TMU40, 0x4A0),
- INTC_VECT(TMU50, 0x4C0),
- INTC_VECT(TMU51, 0x4E0),
- INTC_VECT(TMU60, 0x500),
- INTC_VECT(TMU70, 0x520),
- INTC_VECT(TMU80, 0x540),
- INTC_VECT(RESET_WDT, 0x560),
- INTC_VECT(USB, 0x580),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(SHDMAC, 0x620),
- INTC_VECT(SSI0, 0x6C0),
- INTC_VECT(SSI1, 0x6E0),
- INTC_VECT(SSI2, 0x700),
- INTC_VECT(SSI3, 0x720),
- INTC_VECT(VIN0, 0x740),
- INTC_VECT(RGPVG, 0x760),
- INTC_VECT(_2DG, 0x780),
- INTC_VECT(MMC, 0x7A0),
- INTC_VECT(HSPI, 0x7E0),
- INTC_VECT(LBSCATA, 0x840),
- INTC_VECT(I2C0, 0x860),
- INTC_VECT(RCAN0, 0x880),
- INTC_VECT(SCIF0, 0x8A0),
- INTC_VECT(SCIF1, 0x8C0),
- INTC_VECT(SCIF2, 0x900),
- INTC_VECT(SCIF3, 0x920),
- INTC_VECT(SCIF4, 0x940),
- INTC_VECT(SCIF5, 0x960),
- INTC_VECT(LBSCDMAC0, 0x9E0),
- INTC_VECT(LBSCDMAC1, 0xA00),
- INTC_VECT(LBSCDMAC2, 0xA20),
- INTC_VECT(RCAN1, 0xA60),
- INTC_VECT(SDHI0, 0xAE0),
- INTC_VECT(SDHI1, 0xB00),
- INTC_VECT(IEBUS, 0xB20),
- INTC_VECT(HPBDMAC0_3, 0xB60),
- INTC_VECT(HPBDMAC4_10, 0xB80),
- INTC_VECT(HPBDMAC11_18, 0xBA0),
- INTC_VECT(HPBDMAC19_22, 0xBC0),
- INTC_VECT(HPBDMAC23_25_27_28, 0xBE0),
- INTC_VECT(RTC, 0xC00),
- INTC_VECT(VIN1, 0xC20),
- INTC_VECT(LCDC, 0xC40),
- INTC_VECT(SRC0, 0xC60),
- INTC_VECT(SRC1, 0xC80),
- INTC_VECT(GETHER, 0xCA0),
- INTC_VECT(SDHI2, 0xCC0),
- INTC_VECT(GPIO0_3, 0xCE0),
- INTC_VECT(GPIO4_5, 0xD00),
- INTC_VECT(STIF0, 0xD20),
- INTC_VECT(STIF1, 0xD40),
- INTC_VECT(ADMAC, 0xDA0),
- INTC_VECT(HIF, 0xDC0),
- INTC_VECT(FLCTL, 0xDE0),
- INTC_VECT(ADC, 0xE00),
- INTC_VECT(MTU2, 0xE20),
- INTC_VECT(RSPI, 0xE40),
- INTC_VECT(QSPI, 0xE60),
- INTC_VECT(HSCIF, 0xFC0),
- INTC_VECT(VEU3F_VE3, 0xF40),
-};
-
-static struct intc_group groups[] __initdata = {
- /* Common */
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2),
- INTC_GROUP(SPI, HSPI, RSPI, QSPI),
- INTC_GROUP(SSI, SSI0, SSI1, SSI2, SSI3),
-
- /* Mask group */
- INTC_GROUP(STIF_M, STIF0, STIF1), /* 22 */
- INTC_GROUP(GPIO_M, GPIO0_3, GPIO4_5), /* 21 */
- INTC_GROUP(HPBDMAC_M, HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18,
- HPBDMAC19_22, HPBDMAC23_25_27_28), /* 19 */
- INTC_GROUP(LBSCDMAC_M, LBSCDMAC0, LBSCDMAC1, LBSCDMAC2), /* 18 */
- INTC_GROUP(RCAN_M, RCAN0, RCAN1, IEBUS), /* 17 */
- INTC_GROUP(SRC_M, SRC0, SRC1), /* 16 */
- INTC_GROUP(SCIF_M, SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5,
- HSCIF), /* 14 */
- INTC_GROUP(LCDC_M, LCDC, MIMLB), /* 13 */
- INTC_GROUP(_2DG_M, _2DG, RGPVG), /* 12 */
- INTC_GROUP(VIN_M, VIN0, VIN1), /* 10 */
- INTC_GROUP(TMU_3_M, TMU30, TMU40, TMU50, TMU51,
- TMU60, TMU60, TMU70, TMU80), /* 2 */
- INTC_GROUP(TMU_0_M, TMU00, TMU10, TMU20, TMU21), /* 1 */
-
- /* Priority group*/
- INTC_GROUP(RCAN_P, RCAN0, RCAN1), /* INT2PRI5 */
- INTC_GROUP(LBSCDMAC_P, LBSCDMAC0, LBSCDMAC1), /* INT2PRI5 */
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xFF804040, 0xFF804044, 32, /* INT2MSKRG / INT2MSKCR */
- { 0,
- VEU3F_VE3,
- SDHI, /* SDHI 0-2 */
- ADMAC,
- FLCTL,
- RESET_WDT,
- HIF,
- ADC,
- MTU2,
- STIF_M, /* STIF 0,1 */
- GPIO_M, /* GPIO 0-5*/
- GETHER,
- HPBDMAC_M, /* HPBDMAC 0_3 - 23_25_27_28 */
- LBSCDMAC_M, /* LBSCDMAC 0 - 2 */
- RCAN_M, /* RCAN, IEBUS */
- SRC_M, /* SRC 0,1 */
- LBSCATA,
- SCIF_M, /* SCIF 0-5, HSCIF */
- LCDC_M, /* LCDC, MIMLB */
- _2DG_M, /* 2DG, RGPVG */
- SPI, /* HSPI, RSPI, QSPI */
- VIN_M, /* VIN0, 1 */
- SSI, /* SSI 0-3 */
- USB,
- SHDMAC,
- HUDI,
- MMC,
- RTC,
- I2C0, /* I2C */ /* I2C 0, 1*/
- TMU_3_M, /* TMU30 - TMU80 */
- TMU_0_M, /* TMU00 - TMU21 */
- DU } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xFF804000, 0, 32, 8, /* INT2PRI0 */
- { DU, TMU00, TMU10, TMU20 } },
- { 0xFF804004, 0, 32, 8, /* INT2PRI1 */
- { TMU30, TMU60, RTC, SDHI } },
- { 0xFF804008, 0, 32, 8, /* INT2PRI2 */
- { HUDI, SHDMAC, USB, SSI } },
- { 0xFF80400C, 0, 32, 8, /* INT2PRI3 */
- { VIN0, SPI, _2DG, LBSCATA } },
- { 0xFF804010, 0, 32, 8, /* INT2PRI4 */
- { SCIF0, SCIF3, HSCIF, LCDC } },
- { 0xFF804014, 0, 32, 8, /* INT2PRI5 */
- { RCAN_P, LBSCDMAC_P, LBSCDMAC2, MMC } },
- { 0xFF804018, 0, 32, 8, /* INT2PRI6 */
- { HPBDMAC0_3, HPBDMAC4_10, HPBDMAC11_18, HPBDMAC19_22 } },
- { 0xFF80401C, 0, 32, 8, /* INT2PRI7 */
- { HPBDMAC23_25_27_28, I2C0, SRC0, SRC1 } },
- { 0xFF804020, 0, 32, 8, /* INT2PRI8 */
- { 0 /* ADIF */, VIN1, RESET_WDT, HIF } },
- { 0xFF804024, 0, 32, 8, /* INT2PRI9 */
- { ADMAC, FLCTL, GPIO0_3, GPIO4_5 } },
- { 0xFF804028, 0, 32, 8, /* INT2PRI10 */
- { STIF0, STIF1, VEU3F_VE3, GETHER } },
- { 0xFF80402C, 0, 32, 8, /* INT2PRI11 */
- { MTU2, RGPVG, MIMLB, IEBUS } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7734", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq3210_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2C0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg irq3210_sense_registers[] __initdata = {
- { 0xFF80201C, 32, 2, /* ICR1 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_ack_registers[] __initdata = {
- { 0xFF802024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_mask_reg irq3210_mask_registers[] __initdata = {
- { 0xFF802044, 0xFF802064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static struct intc_prio_reg irq3210_prio_registers[] __initdata = {
- { 0xFF802010, 0, 32, 4, /* INTPRI */
- { IRQ0, IRQ1, IRQ2, IRQ3, } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq3210, "sh7734-irq3210",
- irq3210_vectors, NULL,
- irq3210_mask_registers, irq3210_prio_registers,
- irq3210_sense_registers, irq3210_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl3210[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl3210, "sh7734-irl3210",
- vectors_irl3210, NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xFF802000
-#define INTC_INTMSK0 0xFF802044
-#define INTC_INTMSK1 0xFF802048
-#define INTC_INTMSKCLR0 0xFF802064
-#define INTC_INTMSKCLR1 0xFF802068
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 */
- __raw_writel(0xF0000000, INTC_INTMSK0);
-
- /* disable IRL3-0 */
- __raw_writel(0x80000000, INTC_INTMSK1);
-
- /* select IRL mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00800000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode (LVLMODE)" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq3210);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xf0000000, INTC_INTMSKCLR0);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR0);
- register_intc_controller(&intc_desc_irl3210);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
deleted file mode 100644
index 67e330b7ea4621..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ /dev/null
@@ -1,1242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 Setup
- *
- * Copyright (C) 2009, 2011 Renesas Solutions Corp.
- *
- * based on setup-sh7785.c : Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <cpu/sh7757.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xfe4b0000, 0x100), /* SCIF2 */
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xfe4c0000, 0x100), /* SCIF3 */
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xfe4d0000, 0x100), /* SCIF4 */
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 3,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xfe430000, 0x20),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = 0xfe002000,
- .end = 0xfe0020ff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
- },
- [1] = {
- .start = evt2irq(0xcc0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SDHI_TX,
- .addr = 0x1fe50030,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_SDHI_RX,
- .addr = 0x1fe50030,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc6,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- .addr = 0x1fcb0034,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd3,
- },
- {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- .addr = 0x1fcb0034,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_32BIT),
- .mid_rid = 0xd7,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_SCIF2_TX,
- .addr = 0x1f4b000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF2_RX,
- .addr = 0x1f4b0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_TX,
- .addr = 0x1f4c000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF3_RX,
- .addr = 0x1f4c0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_TX,
- .addr = 0x1f4d000c,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_SCIF4_RX,
- .addr = 0x1f4d0014,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_TX,
- .addr = 0xfe480004,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc1,
- },
- {
- .slave_id = SHDMA_SLAVE_RSPI_RX,
- .addr = 0xfe480004,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_16BIT),
- .mid_rid = 0xc2,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC0_TX,
- .addr = 0x1e500012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC0_RX,
- .addr = 0x1e500013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_TX,
- .addr = 0x1e510012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC1_RX,
- .addr = 0x1e510013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_TX,
- .addr = 0x1e520012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa1,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC2_RX,
- .addr = 0x1e520013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa2,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_TX,
- .addr = 0x1e530012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xa9,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC3_RX,
- .addr = 0x1e530013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xaf,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_TX,
- .addr = 0x1e540012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc5,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC4_RX,
- .addr = 0x1e540013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc6,
- },
-};
-
-static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_RIIC5_TX,
- .addr = 0x1e550012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x21,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC5_RX,
- .addr = 0x1e550013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x22,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_TX,
- .addr = 0x1e560012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x29,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC6_RX,
- .addr = 0x1e560013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x2a,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_TX,
- .addr = 0x1e570012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x41,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC7_RX,
- .addr = 0x1e570013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x42,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_TX,
- .addr = 0x1e580012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x45,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC8_RX,
- .addr = 0x1e580013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x46,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_TX,
- .addr = 0x1e590012,
- .chcr = SM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x51,
- },
- {
- .slave_id = SHDMA_SLAVE_RIIC9_RX,
- .addr = 0x1e590013,
- .chcr = DM_INC | RS_ERS | 0x40000000 |
- TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0x52,
- },
-};
-
-static const struct sh_dmae_channel sh7757_dmae_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .slave = sh7757_dmae0_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae0_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .slave = sh7757_dmae1_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae1_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma2_platform_data = {
- .slave = sh7757_dmae2_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae2_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma3_platform_data = {
- .slave = sh7757_dmae3_slaves,
- .slave_num = ARRAY_SIZE(sh7757_dmae3_slaves),
- .channel = sh7757_dmae_channels,
- .channel_num = ARRAY_SIZE(sh7757_dmae_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* channel 0 to 5 */
-static struct resource sh7757_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff608020,
- .end = 0xff60808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff609000,
- .end = 0xff60900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 6 to 11 */
-static struct resource sh7757_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff618020,
- .end = 0xff61808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff619000,
- .end = 0xff61900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 4 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 5 */
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 6 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 7 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 8 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 9 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 10 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
- {
- /* IRQ for channels 11 */
- .start = evt2irq(0xd00),
- .end = evt2irq(0xd00),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-/* channel 12 to 17 */
-static struct resource sh7757_dmae2_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff708020,
- .end = 0xff70808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff709000,
- .end = 0xff70900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a60),
- .end = evt2irq(0x2a60),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 12 to 16 */
- .start = evt2irq(0x2400),
- .end = evt2irq(0x2480),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 17 */
- .start = evt2irq(0x24e0),
- .end = evt2irq(0x24e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* channel 18 to 23 */
-static struct resource sh7757_dmae3_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xff718020,
- .end = 0xff71808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xff719000,
- .end = 0xff71900b,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "error_irq",
- .start = evt2irq(0x2a80),
- .end = evt2irq(0x2a80),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channels 18 to 22 */
- .start = evt2irq(0x2500),
- .end = evt2irq(0x2580),
- .flags = IORESOURCE_IRQ,
- },
- {
- /* IRQ for channel 23 */
- .start = evt2irq(0x2600),
- .end = evt2irq(0x2600),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7757_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7757_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device dma2_device = {
- .name = "sh-dma-engine",
- .id = 2,
- .resource = sh7757_dmae2_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae2_resources),
- .dev = {
- .platform_data = &dma2_platform_data,
- },
-};
-
-static struct platform_device dma3_device = {
- .name = "sh-dma-engine",
- .id = 3,
- .resource = sh7757_dmae3_resources,
- .num_resources = ARRAY_SIZE(sh7757_dmae3_resources),
- .dev = {
- .platform_data = &dma3_platform_data,
- },
-};
-
-static struct platform_device spi0_device = {
- .name = "sh_spi",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(spi0_resources),
- .resource = spi0_resources,
-};
-
-static struct resource spi1_resources[] = {
- {
- .start = 0xffd8ee70,
- .end = 0xffd8eeff,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- {
- .start = evt2irq(0x8c0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device spi1_device = {
- .name = "sh_spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(spi1_resources),
- .resource = spi1_resources,
-};
-
-static struct resource rspi_resources[] = {
- {
- .start = 0xfe480000,
- .end = 0xfe4800ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = evt2irq(0x1d80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rspi_device = {
- .name = "rspi",
- .id = 2,
- .num_resources = ARRAY_SIZE(rspi_resources),
- .resource = rspi_resources,
-};
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = 0xfe4f1000,
- .end = 0xfe4f10ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xfe4f1800,
- .end = 0xfe4f18ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x920),
- .end = evt2irq(0x920),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7757_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
- &dma0_device,
- &dma1_device,
- &dma2_device,
- &dma3_device,
- &spi0_device,
- &spi1_device,
- &rspi_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-static int __init sh7757_devices_setup(void)
-{
- return platform_add_devices(sh7757_devices,
- ARRAY_SIZE(sh7757_devices));
-}
-arch_initcall(sh7757_devices_setup);
-
-static struct platform_device *sh7757_early_devices[] __initdata = {
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7757_early_devices,
- ARRAY_SIZE(sh7757_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-
- SDHI, DVC,
- IRQ8, IRQ9, IRQ11, IRQ10, IRQ12, IRQ13, IRQ14, IRQ15,
- TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- HUDI,
- ARC4,
- DMAC0_5, DMAC6_7, DMAC8_11,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4,
- USB0, USB1,
- JMC,
- SPI0, SPI1,
- TMR01, TMR23, TMR45,
- FRT,
- LPC, LPC5, LPC6, LPC7, LPC8,
- PECI0, PECI1, PECI2, PECI3, PECI4, PECI5,
- ETHERC,
- ADC0, ADC1,
- SIM,
- IIC0_0, IIC0_1, IIC0_2, IIC0_3,
- IIC1_0, IIC1_1, IIC1_2, IIC1_3,
- IIC2_0, IIC2_1, IIC2_2, IIC2_3,
- IIC3_0, IIC3_1, IIC3_2, IIC3_3,
- IIC4_0, IIC4_1, IIC4_2, IIC4_3,
- IIC5_0, IIC5_1, IIC5_2, IIC5_3,
- IIC6_0, IIC6_1, IIC6_2, IIC6_3,
- IIC7_0, IIC7_1, IIC7_2, IIC7_3,
- IIC8_0, IIC8_1, IIC8_2, IIC8_3,
- IIC9_0, IIC9_1, IIC9_2, IIC9_3,
- ONFICTL,
- MMC1, MMC2,
- ECCU,
- PCIC,
- G200,
- RSPI,
- SGPIO,
- DMINT12, DMINT13, DMINT14, DMINT15, DMINT16, DMINT17, DMINT18, DMINT19,
- DMINT20, DMINT21, DMINT22, DMINT23,
- DDRECC,
- TSIP,
- PCIE_BRIDGE,
- WDT0B, WDT1B, WDT2B, WDT3B, WDT4B, WDT5B, WDT6B, WDT7B, WDT8B,
- GETHER0, GETHER1, GETHER2,
- PBIA, PBIB, PBIC,
- DMAE2, DMAE3,
- SERMUX2, SERMUX3,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
- INTC_VECT(SDHI, 0x4c0),
- INTC_VECT(DVC, 0x4e0),
- INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
- INTC_VECT(IRQ10, 0x540),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(ARC4, 0x620),
- INTC_VECT(DMAC0_5, 0x640), INTC_VECT(DMAC0_5, 0x660),
- INTC_VECT(DMAC0_5, 0x680), INTC_VECT(DMAC0_5, 0x6a0),
- INTC_VECT(DMAC0_5, 0x6c0),
- INTC_VECT(IRQ11, 0x6e0),
- INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
- INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
- INTC_VECT(DMAC0_5, 0x780), INTC_VECT(DMAC0_5, 0x7a0),
- INTC_VECT(DMAC6_7, 0x7c0), INTC_VECT(DMAC6_7, 0x7e0),
- INTC_VECT(USB0, 0x840),
- INTC_VECT(IRQ12, 0x880),
- INTC_VECT(JMC, 0x8a0),
- INTC_VECT(SPI1, 0x8c0),
- INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
- INTC_VECT(USB1, 0x920),
- INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
- INTC_VECT(TMR45, 0xa40),
- INTC_VECT(FRT, 0xa80),
- INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
- INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
- INTC_VECT(LPC, 0xb20),
- INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
- INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
- INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
- INTC_VECT(PECI0, 0xc00), INTC_VECT(PECI1, 0xc20),
- INTC_VECT(PECI2, 0xc40),
- INTC_VECT(IRQ15, 0xc60),
- INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
- INTC_VECT(SPI0, 0xcc0),
- INTC_VECT(ADC1, 0xce0),
- INTC_VECT(DMAC8_11, 0xd00), INTC_VECT(DMAC8_11, 0xd20),
- INTC_VECT(DMAC8_11, 0xd40), INTC_VECT(DMAC8_11, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(ADC0, 0xe60),
- INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
- INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
- INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
- INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
- INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
- INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
- INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
- INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
- INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
- INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
- INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
- INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
- INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
- INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
- INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
- INTC_VECT(IIC6_2, 0x1920),
- INTC_VECT(ONFICTL, 0x1960),
- INTC_VECT(IIC6_3, 0x1980),
- INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
- INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
- INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
- INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
- INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
- INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
- INTC_VECT(MMC1, 0x1c60), INTC_VECT(MMC2, 0x1c80),
- INTC_VECT(ECCU, 0x1cc0),
- INTC_VECT(PCIC, 0x1ce0),
- INTC_VECT(G200, 0x1d00),
- INTC_VECT(RSPI, 0x1d80), INTC_VECT(RSPI, 0x1da0),
- INTC_VECT(RSPI, 0x1dc0), INTC_VECT(RSPI, 0x1de0),
- INTC_VECT(PECI3, 0x1ec0), INTC_VECT(PECI4, 0x1ee0),
- INTC_VECT(PECI5, 0x1f00),
- INTC_VECT(SGPIO, 0x1f80), INTC_VECT(SGPIO, 0x1fa0),
- INTC_VECT(SGPIO, 0x1fc0),
- INTC_VECT(DMINT12, 0x2400), INTC_VECT(DMINT13, 0x2420),
- INTC_VECT(DMINT14, 0x2440), INTC_VECT(DMINT15, 0x2460),
- INTC_VECT(DMINT16, 0x2480), INTC_VECT(DMINT17, 0x24e0),
- INTC_VECT(DMINT18, 0x2500), INTC_VECT(DMINT19, 0x2520),
- INTC_VECT(DMINT20, 0x2540), INTC_VECT(DMINT21, 0x2560),
- INTC_VECT(DMINT22, 0x2580), INTC_VECT(DMINT23, 0x2600),
- INTC_VECT(DDRECC, 0x2620),
- INTC_VECT(TSIP, 0x2640),
- INTC_VECT(PCIE_BRIDGE, 0x27c0),
- INTC_VECT(WDT0B, 0x2800), INTC_VECT(WDT1B, 0x2820),
- INTC_VECT(WDT2B, 0x2840), INTC_VECT(WDT3B, 0x2860),
- INTC_VECT(WDT4B, 0x2880), INTC_VECT(WDT5B, 0x28a0),
- INTC_VECT(WDT6B, 0x28c0), INTC_VECT(WDT7B, 0x28e0),
- INTC_VECT(WDT8B, 0x2900),
- INTC_VECT(GETHER0, 0x2960), INTC_VECT(GETHER1, 0x2980),
- INTC_VECT(GETHER2, 0x29a0),
- INTC_VECT(PBIA, 0x2a00), INTC_VECT(PBIB, 0x2a20),
- INTC_VECT(PBIC, 0x2a40),
- INTC_VECT(DMAE2, 0x2a60), INTC_VECT(DMAE3, 0x2a80),
- INTC_VECT(SERMUX2, 0x2aa0), INTC_VECT(SERMUX3, 0x2b40),
- INTC_VECT(LPC5, 0x2b60), INTC_VECT(LPC6, 0x2b80),
- INTC_VECT(LPC7, 0x2c00), INTC_VECT(LPC8, 0x2c20),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, 0, 0,
- 0, DMAC8_11, 0, PECI0, LPC, FRT, 0, TMR45,
- TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0_5,
- HUDI, 0, 0, SCIF3, SCIF2, SDHI, TMU345, TMU012
- } },
-
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
- IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
- ADC1, 0, DMAC6_7, ADC0, SPI0, SIM, PECI2, PECI1,
- ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
- } },
-
- { 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
- { IIC4_1, IIC4_2, IIC5_0, ONFICTL, 0, 0, SGPIO, 0,
- 0, G200, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
- IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
- IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, 0, IIC2_2
- } },
-
- { 0xffd100d0, 0xffd100d4, 32, /* INT2MSKR3 / INT2MSKCR3 */
- { MMC1, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, PECI5, MMC2,
- IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
- PCIC, 0, IIC4_0, 0, ECCU, RSPI, 0, IIC9_3,
- IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
- } },
-
- { 0xffd20038, 0xffd2003c, 32, /* INT2MSKR4 / INT2MSKCR4 */
- { WDT0B, WDT1B, WDT3B, GETHER0, 0, 0, 0, 0,
- 0, 0, 0, LPC7, SERMUX2, DMAE3, DMAE2, PBIC,
- PBIB, PBIA, GETHER1, DMINT12, DMINT13, DMINT14, DMINT15, TSIP,
- DMINT23, 0, DMINT21, LPC6, 0, DMINT16, 0, DMINT22
- } },
-
- { 0xffd200d0, 0xffd200d4, 32, /* INT2MSKR5 / INT2MSKCR5 */
- { 0, WDT8B, WDT7B, WDT4B, 0, DMINT20, 0, 0,
- DMINT19, DMINT18, LPC5, SERMUX3, WDT2B, GETHER2, 0, 0,
- 0, 0, PCIE_BRIDGE, 0, 0, 0, 0, LPC8,
- DDRECC, 0, WDT6B, WDT5B, 0, 0, 0, DMINT17
- } },
-};
-
-#define INTPRI 0xffd00010
-#define INT2PRI0 0xffd40000
-#define INT2PRI1 0xffd40004
-#define INT2PRI2 0xffd40008
-#define INT2PRI3 0xffd4000c
-#define INT2PRI4 0xffd40010
-#define INT2PRI5 0xffd40014
-#define INT2PRI6 0xffd40018
-#define INT2PRI7 0xffd4001c
-#define INT2PRI8 0xffd400a0
-#define INT2PRI9 0xffd400a4
-#define INT2PRI10 0xffd400a8
-#define INT2PRI11 0xffd400ac
-#define INT2PRI12 0xffd400b0
-#define INT2PRI13 0xffd400b4
-#define INT2PRI14 0xffd400b8
-#define INT2PRI15 0xffd400bc
-#define INT2PRI16 0xffd10000
-#define INT2PRI17 0xffd10004
-#define INT2PRI18 0xffd10008
-#define INT2PRI19 0xffd1000c
-#define INT2PRI20 0xffd10010
-#define INT2PRI21 0xffd10014
-#define INT2PRI22 0xffd10018
-#define INT2PRI23 0xffd1001c
-#define INT2PRI24 0xffd100a0
-#define INT2PRI25 0xffd100a4
-#define INT2PRI26 0xffd100a8
-#define INT2PRI27 0xffd100ac
-#define INT2PRI28 0xffd100b0
-#define INT2PRI29 0xffd100b4
-#define INT2PRI30 0xffd100b8
-#define INT2PRI31 0xffd100bc
-#define INT2PRI32 0xffd20000
-#define INT2PRI33 0xffd20004
-#define INT2PRI34 0xffd20008
-#define INT2PRI35 0xffd2000c
-#define INT2PRI36 0xffd20010
-#define INT2PRI37 0xffd20014
-#define INT2PRI38 0xffd20018
-#define INT2PRI39 0xffd2001c
-#define INT2PRI40 0xffd200a0
-#define INT2PRI41 0xffd200a4
-#define INT2PRI42 0xffd200a8
-#define INT2PRI43 0xffd200ac
-#define INT2PRI44 0xffd200b0
-#define INT2PRI45 0xffd200b4
-#define INT2PRI46 0xffd200b8
-#define INT2PRI47 0xffd200bc
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
- { INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
- { INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, 0, IRQ8 } },
- { INT2PRI3, 0, 32, 8, { HUDI, DMAC0_5, ADC0, IRQ9 } },
- { INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
- { INT2PRI5, 0, 32, 8, { TMR45, 0, FRT, LPC } },
- { INT2PRI6, 0, 32, 8, { PECI0, ETHERC, DMAC8_11, 0 } },
- { INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
- { INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
- { INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
- { INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2, PECI1 } },
- { INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC6_7, IRQ14 } },
- { INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
- { INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
-
- { INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
- { INT2PRI17, 0, 32, 8, { 0, 0, 0, IIC1_0 } },
- { INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
- { INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
- { INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
- { INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
- { INT2PRI22, 0, 32, 8, { IIC9_2, MMC2, G200, 0 } },
- { INT2PRI23, 0, 32, 8, { PECI5, SGPIO, IIC3_2, IIC5_1 } },
- { INT2PRI24, 0, 32, 8, { PECI4, PECI3, 0, IIC1_1 } },
- { INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
- { INT2PRI26, 0, 32, 8, { ECCU, RSPI, 0, IIC9_3 } },
- { INT2PRI27, 0, 32, 8, { PCIC, IIC6_0, IIC4_0, IIC6_1 } },
- { INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, MMC1, IIC6_2 } },
- { INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
- { INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, ONFICTL } },
- { INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
- { INT2PRI32, 0, 32, 8, { DMINT22, 0, 0, 0 } },
- { INT2PRI33, 0, 32, 8, { 0, 0, 0, DMINT16 } },
- { INT2PRI34, 0, 32, 8, { 0, LPC6, DMINT21, DMINT18 } },
- { INT2PRI35, 0, 32, 8, { DMINT23, TSIP, 0, DMINT19 } },
- { INT2PRI36, 0, 32, 8, { DMINT20, GETHER1, PBIA, PBIB } },
- { INT2PRI37, 0, 32, 8, { PBIC, DMAE2, DMAE3, SERMUX2 } },
- { INT2PRI38, 0, 32, 8, { LPC7, 0, 0, 0 } },
- { INT2PRI39, 0, 32, 8, { 0, 0, 0, WDT4B } },
- { INT2PRI40, 0, 32, 8, { 0, 0, 0, DMINT17 } },
- { INT2PRI41, 0, 32, 8, { DDRECC, 0, WDT6B, WDT5B } },
- { INT2PRI42, 0, 32, 8, { 0, 0, 0, LPC8 } },
- { INT2PRI43, 0, 32, 8, { 0, WDT7B, PCIE_BRIDGE, WDT8B } },
- { INT2PRI44, 0, 32, 8, { WDT2B, GETHER2, 0, 0 } },
- { INT2PRI45, 0, 32, 8, { 0, 0, LPC5, SERMUX3 } },
- { INT2PRI46, 0, 32, 8, { WDT0B, WDT1B, WDT3B, GETHER0 } },
- { INT2PRI47, 0, 32, 8, { DMINT12, DMINT13, DMINT14, DMINT15 } },
-};
-
-static struct intc_sense_reg sense_registers_irq8to15[] __initdata = {
- { 0xffd100f8, 32, 2, /* ICR2 */ { IRQ15, IRQ14, IRQ13, IRQ12,
- IRQ11, IRQ10, IRQ9, IRQ8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
- mask_registers, prio_registers,
- sense_registers_irq8to15);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
- INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
- INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
- INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
- INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
- INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
- INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
- INTC_VECT(IRL4_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
deleted file mode 100644
index b0608664785f50..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7763 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2007 Yoshihiro Shimoda
- * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe08000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xf00)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = 0xffec8000,
- .end = 0xffec80ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc60),
- .end = evt2irq(0xc60),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 usb_ohci_dma_mask = 0xffffffffUL;
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct resource usbf_resources[] = {
- [0] = {
- .start = 0xffec0000,
- .end = 0xffec00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xc80),
- .end = evt2irq(0xc80),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbf_device = {
- .name = "sh_udc",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(usbf_resources),
- .resource = usbf_resources,
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd88000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *sh7763_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &usb_ohci_device,
- &usbf_device,
-};
-
-static int __init sh7763_devices_setup(void)
-{
- return platform_add_devices(sh7763_devices,
- ARRAY_SIZE(sh7763_devices));
-}
-arch_initcall(sh7763_devices_setup);
-
-static struct platform_device *sh7763_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7763_early_devices,
- ARRAY_SIZE(sh7763_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
- USBH, USBF, TPU, PCC, MMCIF, SIM,
- TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
- SCIF2, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
- INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
- INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
- INTC_VECT(LCDC, 0x620),
- INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
- INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
- INTC_VECT(DMAC, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
- INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
- INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
- INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
- INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
- INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
- INTC_VECT(USBF, 0xca0),
- INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
- INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
- INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
- INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, 0,
- SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
- { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
- { 0, 0, 0, 0, 0, 0, SCIF2, USBF,
- 0, 0, STIF1, STIF0, 0, 0, USBH, GETHER,
- PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1,
- LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
- { 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } },
- { 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } },
- { 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } },
- { 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } },
- { 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } },
- { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
deleted file mode 100644
index 5efec6ceb04d5c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ /dev/null
@@ -1,571 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7770 Setup
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xff923000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xff924000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xff925000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xff926000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa00)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xff927000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa20)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xff928000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa40)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct plat_sci_port scif6_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif6_resources[] = {
- DEFINE_RES_MEM(0xff929000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa60)),
-};
-
-static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .resource = scif6_resources,
- .num_resources = ARRAY_SIZE(scif6_resources),
- .dev = {
- .platform_data = &scif6_platform_data,
- },
-};
-
-static struct plat_sci_port scif7_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif7_resources[] = {
- DEFINE_RES_MEM(0xff92a000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xa80)),
-};
-
-static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .resource = scif7_resources,
- .num_resources = ARRAY_SIZE(scif7_resources),
- .dev = {
- .platform_data = &scif7_platform_data,
- },
-};
-
-static struct plat_sci_port scif8_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif8_resources[] = {
- DEFINE_RES_MEM(0xff92b000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xaa0)),
-};
-
-static struct platform_device scif8_device = {
- .name = "sh-sci",
- .id = 8,
- .resource = scif8_resources,
- .num_resources = ARRAY_SIZE(scif8_resources),
- .dev = {
- .platform_data = &scif8_platform_data,
- },
-};
-
-static struct plat_sci_port scif9_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_TOIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif9_resources[] = {
- DEFINE_RES_MEM(0xff92c000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xac0)),
-};
-
-static struct platform_device scif9_device = {
- .name = "sh-sci",
- .id = 9,
- .resource = scif9_resources,
- .num_resources = ARRAY_SIZE(scif9_resources),
- .dev = {
- .platform_data = &scif9_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffd81000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffd82000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
- DEFINE_RES_IRQ(evt2irq(0x4e0)),
- DEFINE_RES_IRQ(evt2irq(0x500)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct platform_device *sh7770_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-static int __init sh7770_devices_setup(void)
-{
- return platform_add_devices(sh7770_devices,
- ARRAY_SIZE(sh7770_devices));
-}
-arch_initcall(sh7770_devices_setup);
-
-static struct platform_device *sh7770_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &scif6_device,
- &scif7_device,
- &scif8_device,
- &scif9_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7770_early_devices,
- ARRAY_SIZE(sh7770_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-
- GPIO,
- TMU0, TMU1, TMU2, TMU2_TICPI,
- TMU3, TMU4, TMU5, TMU5_TICPI,
- TMU6, TMU7, TMU8,
- HAC, IPI, SPDIF, HUDI, I2C,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- I2S0, I2S1, I2S2, I2S3,
- SRC_RX, SRC_TX, SRC_SPDIF,
- DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
- GFX3D_MBX, GFX3D_DMAC,
- EXBUS_ATA,
- SPI0, SPI1,
- SCIF089, SCIF1234, SCIF567,
- ADC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
-
- /* interrupt groups */
- TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(GPIO, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
- INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
- INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
- INTC_VECT(TMU8, 0x540),
- INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
- INTC_VECT(SPDIF, 0x5e0),
- INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
- INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
- INTC_VECT(DMAC0_DMINT2, 0x680),
- INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
- INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
- INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
- INTC_VECT(SRC_SPDIF, 0x760),
- INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
- INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
- INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
- INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
- INTC_VECT(GFX2D, 0x8c0),
- INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
- INTC_VECT(EXBUS_ATA, 0x940),
- INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
- INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
- INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
- INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
- INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
- INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
- INTC_VECT(ADC, 0xb20),
- INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
- INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
- INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
- INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
- INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
- INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
- INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
- INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
- INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
- INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
- INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
- INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
- INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
- INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
- INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
- INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
- TMU5_TICPI, TMU6, TMU7, TMU8),
- INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
- INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
- INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
- INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
- INTC_GROUP(SPI, SPI0, SPI1),
- INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
- INTC_GROUP(BBDMAC,
- BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
- BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
- BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
- { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
- GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
- DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
- { 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
- { 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
- { 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
- { 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
- { 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
- { 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
- { 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
- { 0xffe00020, 0, 32, 8, /* INT2PRI8 */
- { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
- { 0xffe00024, 0, 32, 8, /* INT2PRI9 */
- { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
- { 0xffe00028, 0, 32, 8, /* INT2PRI10 */
- { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
- { 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
- { TMU1, TMU2, TMU2_TICPI, TMU3 } },
- { 0xffe00030, 0, 32, 8, /* INT2PRI12 */
- { TMU4, TMU5, TMU5_TICPI, TMU6 } },
- { 0xffe00034, 0, 32, 8, /* INT2PRI13 */
- { TMU7, TMU8 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, } },
-};
-
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
deleted file mode 100644
index c818b788ecb05a..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ /dev/null
@@ -1,505 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7780 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/dma-register.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe00000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffe10000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0xb80)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xffe80000,
- .end = 0xffe80000 + 0x58 - 1,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Shared Period/Carry/Alarm IRQ */
- .start = evt2irq(0x480),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7780_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7780_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7780_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7780_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7780_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7780_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x640-0x6a0, 0x780-0x7a0
- */
- .name = "error_irq",
- .start = evt2irq(0x640),
- .end = evt2irq(0x640),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7780_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc818020,
- .end = 0xfc81808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x6c0, and channel
- * vectors are 0x7c0-0x7e0, 0xd80-0xde0
- */
- .name = "error_irq",
- .start = evt2irq(0x7c0),
- .end = evt2irq(0x7c0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7780_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7780_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7780_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7780_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
- &rtc_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7780_devices_setup(void)
-{
- return platform_add_devices(sh7780_devices,
- ARRAY_SIZE(sh7780_devices));
-}
-arch_initcall(sh7780_devices_setup);
-
-static struct platform_device *sh7780_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- if (mach_is_sh2007()) {
- scif0_platform_data.scscr &= ~SCSCR_CKE1;
- scif1_platform_data.scscr &= ~SCSCR_CKE1;
- }
-
- sh_early_platform_add_devices(sh7780_early_devices,
- ARRAY_SIZE(sh7780_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
- INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
- INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
- INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
- INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
- INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
- INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
- INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI, 0xe80),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
- SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC, CMT, 0, 0, DMAC1, DMAC0,
- HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
- PCISERR, PCIINTA, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect irq_vectors[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_mask_reg irq_mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_prio_reg irq_prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_sense_reg irq_sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg irq_ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
- NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers, irq_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect irl_vectors[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
-};
-
-static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
- NULL, irl7654_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
- NULL, irl3210_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ7-0 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ:
- /* select IRQ mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
- register_intc_controller(&intc_irq_desc);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl7654_desc);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_irl3210_desc);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
deleted file mode 100644
index 3b4a414d60a91c..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ /dev/null
@@ -1,608 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-#include <cpu/dma-register.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x980)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9a0)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9c0)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x9e0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x580)),
- DEFINE_RES_IRQ(evt2irq(0x5a0)),
- DEFINE_RES_IRQ(evt2irq(0x5c0)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0xe00)),
- DEFINE_RES_IRQ(evt2irq(0xe20)),
- DEFINE_RES_IRQ(evt2irq(0xe40)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-/* DMA */
-static const struct sh_dmae_channel sh7785_dmae0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const struct sh_dmae_channel sh7785_dmae1_channels[] = {
- {
- .offset = 0,
- }, {
- .offset = 0x10,
- }, {
- .offset = 0x20,
- }, {
- .offset = 0x30,
- }, {
- .offset = 0x50,
- }, {
- .offset = 0x60,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = sh7785_dmae0_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct sh_dmae_pdata dma1_platform_data = {
- .channel = sh7785_dmae1_channels,
- .channel_num = ARRAY_SIZE(sh7785_dmae1_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-static struct resource sh7785_dmae0_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfc808020,
- .end = 0xfc80808f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* DMARSx */
- .start = 0xfc809000,
- .end = 0xfc80900b,
- .flags = IORESOURCE_MEM,
- },
- {
- /*
- * Real DMA error vector is 0x6e0, and channel
- * vectors are 0x620-0x6c0
- */
- .name = "error_irq",
- .start = evt2irq(0x620),
- .end = evt2irq(0x620),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct resource sh7785_dmae1_resources[] = {
- [0] = {
- /* Channel registers and DMAOR */
- .start = 0xfcc08020,
- .end = 0xfcc0808f,
- .flags = IORESOURCE_MEM,
- },
- /* DMAC1 has no DMARS */
- {
- /*
- * Real DMA error vector is 0x940, and channel
- * vectors are 0x880-0x920
- */
- .name = "error_irq",
- .start = evt2irq(0x880),
- .end = evt2irq(0x880),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = sh7785_dmae0_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-static struct platform_device dma1_device = {
- .name = "sh-dma-engine",
- .id = 1,
- .resource = sh7785_dmae1_resources,
- .num_resources = ARRAY_SIZE(sh7785_dmae1_resources),
- .dev = {
- .platform_data = &dma1_platform_data,
- },
-};
-
-static struct platform_device *sh7785_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &dma0_device,
- &dma1_device,
-};
-
-static int __init sh7785_devices_setup(void)
-{
- return platform_add_devices(sh7785_devices,
- ARRAY_SIZE(sh7785_devices));
-}
-arch_initcall(sh7785_devices_setup);
-
-static struct platform_device *sh7785_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7785_early_devices,
- ARRAY_SIZE(sh7785_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
-
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
- SCIF2, SCIF3, SCIF4, SCIF5,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
- SIOF, MMCIF, DU, GDTA,
- TMU3, TMU4, TMU5,
- SSI0, SSI1,
- HAC0, HAC1,
- FLCTL, GPIO,
-
- /* interrupt groups */
-
- TMU012, TMU345
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(WDT, 0x560),
- INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
- INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
- INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
- INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
- INTC_VECT(DMAC0, 0x6e0),
- INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
- INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
- INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
- INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
- INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
- INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
- INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
- INTC_VECT(DMAC1, 0x940),
- INTC_VECT(HSPI, 0x960),
- INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
- INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
- INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
- INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
- INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
- INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
- INTC_VECT(SIOF, 0xc00),
- INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
- INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
- INTC_VECT(DU, 0xd80),
- INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
- INTC_VECT(GDTA, 0xde0),
- INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
- INTC_VECT(TMU5, 0xe40),
- INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
- INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
- INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
- INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
- INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
- INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-};
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-
- { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
-
- { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
- { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
- FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
- PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
- SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
- TMU2, TMU2_TICPI } },
- { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
- { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1,
- SCIF2, SCIF3 } },
- { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
- { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
- { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1,
- PCISERR, PCIINTA } },
- { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
- { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
- { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg ack_registers[] __initdata = {
- { 0xffd00024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
- vectors_irq0123, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
- vectors_irq4567, NULL, mask_registers,
- prio_registers, sense_registers, ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
- INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
- INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
- INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
- INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
- INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
- INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
- INTC_VECT(IRL4_HHHL, 0xcc0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
- NULL, mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
- NULL, mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xffd00000
-#define INTC_INTMSK0 0xffd00044
-#define INTC_INTMSK1 0xffd00048
-#define INTC_INTMSK2 0xffd40080
-#define INTC_INTMSKCLR1 0xffd00068
-#define INTC_INTMSKCLR2 0xffd40084
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- /* disable holding function, ie enable "SH-4 Mode" */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
-
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0xe55f0000, 0xe5610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
deleted file mode 100644
index 74620f30b19bad..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ /dev/null
@@ -1,841 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Setup
- *
- * Copyright (C) 2009 - 2011 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Paul Mundt <paul.mundt@renesas.com>
- *
- * Based on SH7785 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <cpu/dma-register.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffea0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-/*
- * The rest of these all have multiplexed IRQs
- */
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
-};
-
-static struct resource scif1_demux_resources[] = {
- DEFINE_RES_MEM(0xffeb0000, 0x100),
- /* Placeholders, see sh7786_devices_setup() */
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
- DEFINE_RES_IRQ(0),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffec0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x840)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct plat_sci_port scif3_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif3_resources[] = {
- DEFINE_RES_MEM(0xffed0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x860)),
-};
-
-static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .resource = scif3_resources,
- .num_resources = ARRAY_SIZE(scif3_resources),
- .dev = {
- .platform_data = &scif3_platform_data,
- },
-};
-
-static struct plat_sci_port scif4_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif4_resources[] = {
- DEFINE_RES_MEM(0xffee0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
-};
-
-static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .resource = scif4_resources,
- .num_resources = ARRAY_SIZE(scif4_resources),
- .dev = {
- .platform_data = &scif4_platform_data,
- },
-};
-
-static struct plat_sci_port scif5_platform_data = {
- .scscr = SCSCR_REIE | SCSCR_CKE1,
- .type = PORT_SCIF,
- .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-};
-
-static struct resource scif5_resources[] = {
- DEFINE_RES_MEM(0xffef0000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
-};
-
-static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .resource = scif5_resources,
- .num_resources = ARRAY_SIZE(scif5_resources),
- .dev = {
- .platform_data = &scif5_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffda0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
- DEFINE_RES_IRQ(evt2irq(0x4c0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct sh_timer_config tmu2_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu2_resources[] = {
- DEFINE_RES_MEM(0xffdc0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
-};
-
-static struct platform_device tmu2_device = {
- .name = "sh-tmu",
- .id = 2,
- .dev = {
- .platform_data = &tmu2_platform_data,
- },
- .resource = tmu2_resources,
- .num_resources = ARRAY_SIZE(tmu2_resources),
-};
-
-static struct sh_timer_config tmu3_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu3_resources[] = {
- DEFINE_RES_MEM(0xffde0000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device tmu3_device = {
- .name = "sh-tmu",
- .id = 3,
- .dev = {
- .platform_data = &tmu3_platform_data,
- },
- .resource = tmu3_resources,
- .num_resources = ARRAY_SIZE(tmu3_resources),
-};
-
-static const struct sh_dmae_channel dmac0_channels[] = {
- {
- .offset = 0,
- .dmars = 0,
- .dmars_bit = 0,
- }, {
- .offset = 0x10,
- .dmars = 0,
- .dmars_bit = 8,
- }, {
- .offset = 0x20,
- .dmars = 4,
- .dmars_bit = 0,
- }, {
- .offset = 0x30,
- .dmars = 4,
- .dmars_bit = 8,
- }, {
- .offset = 0x50,
- .dmars = 8,
- .dmars_bit = 0,
- }, {
- .offset = 0x60,
- .dmars = 8,
- .dmars_bit = 8,
- }
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma0_platform_data = {
- .channel = dmac0_channels,
- .channel_num = ARRAY_SIZE(dmac0_channels),
- .ts_low_shift = CHCR_TS_LOW_SHIFT,
- .ts_low_mask = CHCR_TS_LOW_MASK,
- .ts_high_shift = CHCR_TS_HIGH_SHIFT,
- .ts_high_mask = CHCR_TS_HIGH_MASK,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
- .dmaor_init = DMAOR_INIT,
-};
-
-/* Resource order important! */
-static struct resource dmac0_resources[] = {
- {
- /* Channel registers and DMAOR */
- .start = 0xfe008020,
- .end = 0xfe00808f,
- .flags = IORESOURCE_MEM,
- }, {
- /* DMARSx */
- .start = 0xfe009000,
- .end = 0xfe00900b,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "error_irq",
- .start = evt2irq(0x5c0),
- .end = evt2irq(0x5c0),
- .flags = IORESOURCE_IRQ,
- }, {
- /* IRQ for channels 0-5 */
- .start = evt2irq(0x500),
- .end = evt2irq(0x5a0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dma0_device = {
- .name = "sh-dma-engine",
- .id = 0,
- .resource = dmac0_resources,
- .num_resources = ARRAY_SIZE(dmac0_resources),
- .dev = {
- .platform_data = &dma0_platform_data,
- },
-};
-
-#define USB_EHCI_START 0xffe70000
-#define USB_OHCI_START 0xffe70400
-
-static struct resource usb_ehci_resources[] = {
- [0] = {
- .start = USB_EHCI_START,
- .end = USB_EHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb_ehci_device = {
- .name = "sh_ehci",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usb_ehci_resources),
- .resource = usb_ehci_resources,
-};
-
-static struct resource usb_ohci_resources[] = {
- [0] = {
- .start = USB_OHCI_START,
- .end = USB_OHCI_START + 0x3ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0xba0),
- .end = evt2irq(0xba0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct usb_ohci_pdata usb_ohci_pdata;
-
-static struct platform_device usb_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .dev = {
- .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usb_ohci_pdata,
- },
- .num_resources = ARRAY_SIZE(usb_ohci_resources),
- .resource = usb_ohci_resources,
-};
-
-static struct platform_device *sh7786_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &scif3_device,
- &scif4_device,
- &scif5_device,
- &tmu0_device,
- &tmu1_device,
- &tmu2_device,
- &tmu3_device,
-};
-
-static struct platform_device *sh7786_devices[] __initdata = {
- &dma0_device,
- &usb_ehci_device,
- &usb_ohci_device,
-};
-
-/*
- * Please call this function if your platform board
- * use external clock for USB
- * */
-#define USBCTL0 0xffe70858
-#define CLOCK_MODE_MASK 0xffffff7f
-#define EXT_CLOCK_MODE 0x00000080
-
-void __init sh7786_usb_use_exclock(void)
-{
- u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
- __raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
-}
-
-#define USBINITREG1 0xffe70094
-#define USBINITREG2 0xffe7009c
-#define USBINITVAL1 0x00ff0040
-#define USBINITVAL2 0x00000001
-
-#define USBPCTL1 0xffe70804
-#define USBST 0xffe70808
-#define PHY_ENB 0x00000001
-#define PLL_ENB 0x00000002
-#define PHY_RST 0x00000004
-#define ACT_PLL_STATUS 0xc0000000
-
-static void __init sh7786_usb_setup(void)
-{
- int i = 1000000;
-
- /*
- * USB initial settings
- *
- * The following settings are necessary
- * for using the USB modules.
- *
- * see "USB Initial Settings" for detail
- */
- __raw_writel(USBINITVAL1, USBINITREG1);
- __raw_writel(USBINITVAL2, USBINITREG2);
-
- /*
- * Set the PHY and PLL enable bit
- */
- __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i--) {
- if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
- break;
- }
- cpu_relax();
- }
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
-
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
-
- IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT,
- TMU0_0, TMU0_1, TMU0_2, TMU0_3,
- TMU1_0, TMU1_1, TMU1_2,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3,
- SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB,
- I2C0, I2C1,
- DU,
- SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL,
- HSPI,
- GPIO0, GPIO1,
- Thermal,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* Muxed sub-events */
- TXI1, BRI1, RXI1, ERI1,
-};
-
-static struct intc_vect sh7786_vectors[] __initdata = {
- INTC_VECT(WDT, 0x3e0),
- INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
- INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
- INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
- INTC_VECT(TMU1_2, 0x4c0),
- INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
- INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
- INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
- INTC_VECT(DMAC0_6, 0x5c0),
- INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
- INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
- INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
- INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
- INTC_VECT(HPB_2, 0x6e0),
- INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
- INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
- INTC_VECT(SCIF1, 0x780),
- INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
- INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
- INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
- INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
- INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
- INTC_VECT(PCIeC0_2, 0xb20),
- INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
- INTC_VECT(PCIeC1_2, 0xb80),
- INTC_VECT(USB, 0xba0),
- INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
- INTC_VECT(DU, 0xd00),
- INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
- INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
- INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
- INTC_VECT(PCIeC2_2, 0xde0),
- INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
- INTC_VECT(FLCTL, 0xe40),
- INTC_VECT(HSPI, 0xe80),
- INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
- INTC_VECT(Thermal, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-#define CnINTMSK0 0xfe410030
-#define CnINTMSK1 0xfe410040
-#define CnINTMSKCLR0 0xfe410050
-#define CnINTMSKCLR1 0xfe410060
-#define CnINT2MSKR0 0xfe410a20
-#define CnINT2MSKR1 0xfe410a24
-#define CnINT2MSKR2 0xfe410a28
-#define CnINT2MSKR3 0xfe410a2c
-#define CnINT2MSKCR0 0xfe410a30
-#define CnINT2MSKCR1 0xfe410a34
-#define CnINT2MSKCR2 0xfe410a38
-#define CnINT2MSKCR3 0xfe410a3c
-#define INTMSK2 0xfe410068
-#define INTMSKCLR2 0xfe41006c
-
-#define INTDISTCR0 0xfe4100b0
-#define INTDISTCR1 0xfe4100b4
-#define INT2DISTCR0 0xfe410900
-#define INT2DISTCR1 0xfe410904
-#define INT2DISTCR2 0xfe410908
-#define INT2DISTCR3 0xfe41090c
-
-static struct intc_mask_reg sh7786_mask_registers[] __initdata = {
- { CnINTMSK0, CnINTMSKCLR0, 32,
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 },
- INTC_SMP_BALANCING(INTDISTCR0) },
- { INTMSK2, INTMSKCLR2, 32,
- { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
- IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
- IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
- IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
- IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
- IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
- IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
- IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
- { CnINT2MSKR0, CnINT2MSKCR0 , 32,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { CnINT2MSKR1, CnINT2MSKCR1, 32,
- { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
- DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
- HUDI1, HUDI0,
- DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
- HPB_0, HPB_1, HPB_2,
- SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
- SCIF1,
- TMU2, TMU3, 0, }, INTC_SMP_BALANCING(INT2DISTCR1) },
- { CnINT2MSKR2, CnINT2MSKCR2, 32,
- { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
- Eth_0, Eth_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- PCIeC0_0, PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1, PCIeC1_2,
- USB, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR2) },
- { CnINT2MSKR3, CnINT2MSKCR3, 32,
- { 0, 0, 0, 0, 0, 0,
- I2C0, I2C1,
- DU, SSI0, SSI1, SSI2, SSI3,
- PCIeC2_0, PCIeC2_1, PCIeC2_2,
- HAC0, HAC1,
- FLCTL, 0,
- HSPI, GPIO0, GPIO1, Thermal,
- 0, 0, 0, 0, 0, 0, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR3) },
-};
-
-static struct intc_prio_reg sh7786_prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
- { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
- { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
- TMU0_2, TMU0_3 } },
- { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
- TMU1_2, 0 } },
- { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
- DMAC0_2, DMAC0_3 } },
- { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
- DMAC0_6, HUDI1 } },
- { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
- DMAC1_1, DMAC1_2 } },
- { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
- HPB_1, HPB_2 } },
- { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
- SCIF0_2, SCIF0_3 } },
- { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
- { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
- { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
- Eth_0, Eth_1 } },
- { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
- { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
- { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
- { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
- { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
- PCIeC1_0, PCIeC1_1 } },
- { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
- { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
- { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
- { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
- { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
- PCIeC2_1, PCIeC2_2 } },
- { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
- { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
- GPIO1, Thermal } },
- { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
- { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
-};
-
-static struct intc_subgroup sh7786_subgroups[] __initdata = {
- { 0xfe410c20, 32, SCIF1,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TXI1, BRI1, RXI1, ERI1 } },
-};
-
-static struct intc_desc sh7786_intc_desc __initdata = {
- .name = "sh7786",
- .hw = {
- .vectors = sh7786_vectors,
- .nr_vectors = ARRAY_SIZE(sh7786_vectors),
- .mask_regs = sh7786_mask_registers,
- .nr_mask_regs = ARRAY_SIZE(sh7786_mask_registers),
- .subgroups = sh7786_subgroups,
- .nr_subgroups = ARRAY_SIZE(sh7786_subgroups),
- .prio_regs = sh7786_prio_registers,
- .nr_prio_regs = ARRAY_SIZE(sh7786_prio_registers),
- },
-};
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
- INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
-};
-
-static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
- INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
-};
-
-static struct intc_sense_reg sh7786_sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static struct intc_mask_reg sh7786_ack_registers[] __initdata = {
- { 0xfe410024, 0, 32, /* INTREQ */
- { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
-};
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
- vectors_irq0123, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
- vectors_irq4567, NULL, sh7786_mask_registers,
- sh7786_prio_registers, sh7786_sense_registers,
- sh7786_ack_registers);
-
-/* External interrupt pins in IRL mode */
-
-static struct intc_vect vectors_irl0123[] __initdata = {
- INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
- INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
- INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
- INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
- INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
- INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
- INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
- INTC_VECT(IRL0_HHHL, 0x3c0),
-};
-
-static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
- INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
- INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
- INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
- INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
- INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
- INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
- INTC_VECT(IRL4_HHHL, 0xac0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
- NULL, sh7786_mask_registers, NULL, NULL);
-
-#define INTC_ICR0 0xfe410000
-#define INTC_INTMSK0 CnINTMSK0
-#define INTC_INTMSK1 CnINTMSK1
-#define INTC_INTMSK2 INTMSK2
-#define INTC_INTMSKCLR1 CnINTMSKCLR1
-#define INTC_INTMSKCLR2 INTMSKCLR2
-
-void __init plat_irq_setup(void)
-{
- /* disable IRQ3-0 + IRQ7-4 */
- __raw_writel(0xff000000, INTC_INTMSK0);
-
- /* disable IRL3-0 + IRL7-4 */
- __raw_writel(0xc0000000, INTC_INTMSK1);
- __raw_writel(0xfffefffe, INTC_INTMSK2);
-
- /* select IRL mode for IRL3-0 + IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
-
- register_intc_controller(&sh7786_intc_desc);
-}
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ7654:
- /* select IRQ mode for IRL7-4 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq4567);
- break;
- case IRQ_MODE_IRQ3210:
- /* select IRQ mode for IRL3-0 */
- __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
- register_intc_controller(&intc_desc_irq0123);
- break;
- case IRQ_MODE_IRL7654:
- /* enable IRL7-4 but don't provide any masking */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- __raw_writel(0x0000fffe, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL3210:
- /* enable IRL0-3 but don't provide any masking */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- __raw_writel(0xfffe0000, INTC_INTMSKCLR2);
- break;
- case IRQ_MODE_IRL7654_MASK:
- /* enable IRL7-4 and mask using cpu intc controller */
- __raw_writel(0x40000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl4567);
- break;
- case IRQ_MODE_IRL3210_MASK:
- /* enable IRL0-3 and mask using cpu intc controller */
- __raw_writel(0x80000000, INTC_INTMSKCLR1);
- register_intc_controller(&intc_desc_irl0123);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_mem_setup(void)
-{
-}
-
-static int __init sh7786_devices_setup(void)
-{
- int ret, irq;
-
- sh7786_usb_setup();
-
- /*
- * De-mux SCIF1 IRQs if possible
- */
- irq = intc_irq_lookup(sh7786_intc_desc.name, TXI1);
- if (irq > 0) {
- scif1_demux_resources[1].start =
- intc_irq_lookup(sh7786_intc_desc.name, ERI1);
- scif1_demux_resources[2].start =
- intc_irq_lookup(sh7786_intc_desc.name, RXI1);
- scif1_demux_resources[3].start = irq;
- scif1_demux_resources[4].start =
- intc_irq_lookup(sh7786_intc_desc.name, BRI1);
-
- scif1_device.resource = scif1_demux_resources;
- scif1_device.num_resources = ARRAY_SIZE(scif1_demux_resources);
- }
-
- ret = platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
- if (unlikely(ret != 0))
- return ret;
-
- return platform_add_devices(sh7786_devices,
- ARRAY_SIZE(sh7786_devices));
-}
-arch_initcall(sh7786_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh7786_early_devices,
- ARRAY_SIZE(sh7786_early_devices));
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
deleted file mode 100644
index 7014d6d199b3e6..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ /dev/null
@@ -1,396 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 Prototype Setup
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <cpu/shx3.h>
-#include <asm/mmzone.h>
-#include <asm/platform_early.h>
-
-/*
- * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
- * INTEVT values overlap with the FPU EXPEVT ones, requiring special
- * demuxing in the exception dispatch path.
- *
- * As this overlap is something that never should have made it in to
- * silicon in the first place, we just refuse to deal with the port at
- * all rather than adding infrastructure to hack around it.
- */
-static struct plat_sci_port scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffc30000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct plat_sci_port scif1_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xffc40000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x780)),
- DEFINE_RES_IRQ(evt2irq(0x7a0)),
- DEFINE_RES_IRQ(evt2irq(0x7e0)),
- DEFINE_RES_IRQ(evt2irq(0x7c0)),
-};
-
-static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .resource = scif1_resources,
- .num_resources = ARRAY_SIZE(scif1_resources),
- .dev = {
- .platform_data = &scif1_platform_data,
- },
-};
-
-static struct plat_sci_port scif2_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xffc60000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x880)),
- DEFINE_RES_IRQ(evt2irq(0x8a0)),
- DEFINE_RES_IRQ(evt2irq(0x8e0)),
- DEFINE_RES_IRQ(evt2irq(0x8c0)),
-};
-
-static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .resource = scif2_resources,
- .num_resources = ARRAY_SIZE(scif2_resources),
- .dev = {
- .platform_data = &scif2_platform_data,
- },
-};
-
-static struct sh_timer_config tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffc10000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct sh_timer_config tmu1_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu1_resources[] = {
- DEFINE_RES_MEM(0xffc20000, 0x2c),
- DEFINE_RES_IRQ(evt2irq(0x460)),
- DEFINE_RES_IRQ(evt2irq(0x480)),
- DEFINE_RES_IRQ(evt2irq(0x4a0)),
-};
-
-static struct platform_device tmu1_device = {
- .name = "sh-tmu",
- .id = 1,
- .dev = {
- .platform_data = &tmu1_platform_data,
- },
- .resource = tmu1_resources,
- .num_resources = ARRAY_SIZE(tmu1_resources),
-};
-
-static struct platform_device *shx3_early_devices[] __initdata = {
- &scif0_device,
- &scif1_device,
- &scif2_device,
- &tmu0_device,
- &tmu1_device,
-};
-
-static int __init shx3_devices_setup(void)
-{
- return platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-arch_initcall(shx3_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(shx3_early_devices,
- ARRAY_SIZE(shx3_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL,
- IRQ0, IRQ1, IRQ2, IRQ3,
- HUDII,
- TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
- PCII0, PCII1, PCII2, PCII3, PCII4,
- PCII5, PCII6, PCII7, PCII8, PCII9,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
- DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
- DU,
- DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
- DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
- IIC, VIN0, VIN1, VCORE0, ATAPI,
- DTU0, DTU1, DTU2, DTU3,
- FE0, FE1,
- GPIO0, GPIO1, GPIO2, GPIO3,
- PAM, IRM,
- INTICI0, INTICI1, INTICI2, INTICI3,
- INTICI4, INTICI5, INTICI6, INTICI7,
-
- /* interrupt groups */
- IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
- DMAC0, DMAC1,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDII, 0x3e0),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460),
- INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0),
- INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520),
- INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560),
- INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0),
- INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0),
- INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
- INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
- INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
- INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
- INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
- INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960),
- INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0),
- INTC_VECT(DMAC0_DMAE, 0x9c0),
- INTC_VECT(DU, 0x9e0),
- INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20),
- INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60),
- INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0),
- INTC_VECT(DMAC1_DMAE, 0xac0),
- INTC_VECT(IIC, 0xae0),
- INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
- INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
- INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
- INTC_VECT(DTU0, 0xc40),
- INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
- INTC_VECT(DTU1, 0xca0),
- INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
- INTC_VECT(DTU2, 0xd00),
- INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
- INTC_VECT(DTU3, 0xd60),
- INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
- INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
- INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
- INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0),
- INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
- INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
- INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
- INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
- IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
- IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
- IRL_HHLL, IRL_HHLH, IRL_HHHL),
- INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
- INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
- DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-};
-
-#define INT2DISTCR0 0xfe4108a0
-#define INT2DISTCR1 0xfe4108a4
-#define INT2DISTCR2 0xfe4108a8
-
-static struct intc_mask_reg mask_registers[] __initdata = {
- { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */
- { IRQ0, IRQ1, IRQ2, IRQ3 } },
- { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */
- { IRL } },
- { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */
- { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC,
- DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */
- 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, },
- INTC_SMP_BALANCING(INT2DISTCR0) },
- { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */
- { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */
- PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2,
- PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11,
- DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7,
- DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4,
- DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 },
- INTC_SMP_BALANCING(INT2DISTCR1) },
- { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI,
- SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI,
- SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI,
- SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI },
- INTC_SMP_BALANCING(INT2DISTCR2) },
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-
- { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4,
- TMU3, TMU2, TMU1, TMU0 } },
- { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0,
- SCIF3, SCIF2,
- SCIF1, SCIF0 } },
- { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0,
- PCII56789, PCII4,
- PCII3, PCII2,
- PCII1, PCII0 } },
- { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0,
- VIN1, VIN0, IIC, DU} },
- { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3,
- GPIO2, GPIO1, GPIO0, IRM } },
- { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
- { INTICI7, INTICI6, INTICI5, INTICI4,
- INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups,
- mask_registers, prio_registers, NULL);
-
-/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect vectors_irq[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
-};
-
-static struct intc_sense_reg sense_registers[] __initdata = {
- { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
- mask_registers, prio_registers, sense_registers);
-
-/* External interrupt pins in IRL mode */
-static struct intc_vect vectors_irl[] __initdata = {
- INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
- INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
- INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
- INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
- INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
- INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
- INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
- INTC_VECT(IRL_HHHL, 0x3c0),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
- mask_registers, prio_registers, NULL);
-
-void __init plat_irq_setup_pins(int mode)
-{
- int ret = 0;
-
- switch (mode) {
- case IRQ_MODE_IRQ:
- ret |= gpio_request(GPIO_FN_IRQ3, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ2, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ1, intc_desc_irq.name);
- ret |= gpio_request(GPIO_FN_IRQ0, intc_desc_irq.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRQ mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irq);
- break;
- case IRQ_MODE_IRL3210:
- ret |= gpio_request(GPIO_FN_IRL3, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL2, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL1, intc_desc_irl.name);
- ret |= gpio_request(GPIO_FN_IRL0, intc_desc_irl.name);
-
- if (unlikely(ret)) {
- pr_err("Failed to set IRL mode\n");
- return;
- }
-
- register_intc_controller(&intc_desc_irl);
- break;
- default:
- BUG();
- }
-}
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-void __init plat_mem_setup(void)
-{
- unsigned int nid = 1;
-
- /* Register CPU#0 URAM space as Node 1 */
- setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */
-
-#if 0
- /* XXX: Not yet.. */
- setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */
- setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */
- setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */
-#endif
-
- setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */
-}
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
deleted file mode 100644
index 1261dc7b84e8be..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 SMP
- *
- * Copyright (C) 2007 - 2010 Paul Mundt
- * Copyright (C) 2007 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/cpu.h>
-#include <asm/sections.h>
-
-#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
-#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
-
-#define STBCR_MSTP 0x00000001
-#define STBCR_RESET 0x00000002
-#define STBCR_SLEEP 0x00000004
-#define STBCR_LTSLP 0x80000000
-
-static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
-{
- unsigned int message = (unsigned int)(long)arg;
- unsigned int cpu = hard_smp_processor_id();
- unsigned int offs = 4 * cpu;
- unsigned int x;
-
- x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
- x &= (1 << (message << 2));
- __raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
-
- smp_message_recv(message);
-
- return IRQ_HANDLED;
-}
-
-static void shx3_smp_setup(void)
-{
- unsigned int cpu = 0;
- int i, num;
-
- init_cpu_possible(cpumask_of(cpu));
-
- /* Enable light sleep for the boot CPU */
- __raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
-
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
-
- /*
- * Do this stupidly for now.. we don't have an easy way to probe
- * for the total number of cores.
- */
- for (i = 1, num = 0; i < NR_CPUS; i++) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
-
- printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
-}
-
-static void shx3_prepare_cpus(unsigned int max_cpus)
-{
- int i;
-
- BUILD_BUG_ON(SMP_MSG_NR >= 8);
-
- for (i = 0; i < SMP_MSG_NR; i++)
- if (request_irq(104 + i, ipi_interrupt_handler,
- IRQF_PERCPU, "IPI", (void *)(long)i))
- pr_err("Failed to request irq %d\n", i);
-
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-}
-
-static void shx3_start_cpu(unsigned int cpu, unsigned long entry_point)
-{
- if (__in_29bit_mode())
- __raw_writel(entry_point, RESET_REG(cpu));
- else
- __raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
-
- if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
-
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
-
- /* Start up secondary processor by sending a reset */
- __raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
-}
-
-static unsigned int shx3_smp_processor_id(void)
-{
- return __raw_readl(0xff000048); /* CPIDR */
-}
-
-static void shx3_send_ipi(unsigned int cpu, unsigned int message)
-{
- unsigned long addr = 0xfe410070 + (cpu * 4);
-
- BUG_ON(cpu >= 4);
-
- __raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
-}
-
-static void shx3_update_boot_vector(unsigned int cpu)
-{
- __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
- while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
- cpu_relax();
- __raw_writel(STBCR_RESET, STBCR_REG(cpu));
-}
-
-static int shx3_cpu_prepare(unsigned int cpu)
-{
- shx3_update_boot_vector(cpu);
- return 0;
-}
-
-static int register_shx3_cpu_notifier(void)
-{
- cpuhp_setup_state_nocalls(CPUHP_SH_SH3X_PREPARE, "sh/shx3:prepare",
- shx3_cpu_prepare, NULL);
- return 0;
-}
-late_initcall(register_shx3_cpu_notifier);
-
-struct plat_smp_ops shx3_smp_ops = {
- .smp_setup = shx3_smp_setup,
- .prepare_cpus = shx3_prepare_cpus,
- .start_cpu = shx3_start_cpu,
- .smp_processor_id = shx3_smp_processor_id,
- .send_ipi = shx3_send_ipi,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
-};
diff --git a/arch/sh/kernel/cpu/sh4a/ubc.c b/arch/sh/kernel/cpu/sh4a/ubc.c
deleted file mode 100644
index 25eacd9c47d1b8..00000000000000
--- a/arch/sh/kernel/cpu/sh4a/ubc.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4a/ubc.c
- *
- * On-chip UBC support for SH-4A CPUs.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <asm/hw_breakpoint.h>
-
-#define UBC_CBR(idx) (0xff200000 + (0x20 * idx))
-#define UBC_CRR(idx) (0xff200004 + (0x20 * idx))
-#define UBC_CAR(idx) (0xff200008 + (0x20 * idx))
-#define UBC_CAMR(idx) (0xff20000c + (0x20 * idx))
-
-#define UBC_CCMFR 0xff200600
-#define UBC_CBCR 0xff200620
-
-/* CRR */
-#define UBC_CRR_PCB (1 << 1)
-#define UBC_CRR_BIE (1 << 0)
-
-/* CBR */
-#define UBC_CBR_CE (1 << 0)
-
-static struct sh_ubc sh4a_ubc;
-
-static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
- __raw_writel(info->address, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
-{
- __raw_writel(0, UBC_CBR(idx));
- __raw_writel(0, UBC_CAR(idx));
-}
-
-static void sh4a_ubc_enable_all(unsigned long mask)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (mask & (1 << i))
- __raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static void sh4a_ubc_disable_all(void)
-{
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- __raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
- UBC_CBR(i));
-}
-
-static unsigned long sh4a_ubc_active_mask(void)
-{
- unsigned long active = 0;
- int i;
-
- for (i = 0; i < sh4a_ubc.num_events; i++)
- if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
- active |= (1 << i);
-
- return active;
-}
-
-static unsigned long sh4a_ubc_triggered_mask(void)
-{
- return __raw_readl(UBC_CCMFR);
-}
-
-static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
-{
- __raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
-}
-
-static struct sh_ubc sh4a_ubc = {
- .name = "SH-4A",
- .num_events = 2,
- .trap_nr = 0x1e0,
- .enable = sh4a_ubc_enable,
- .disable = sh4a_ubc_disable,
- .enable_all = sh4a_ubc_enable_all,
- .disable_all = sh4a_ubc_disable_all,
- .active_mask = sh4a_ubc_active_mask,
- .triggered_mask = sh4a_ubc_triggered_mask,
- .clear_triggered_mask = sh4a_ubc_clear_triggered_mask,
-};
-
-static int __init sh4a_ubc_init(void)
-{
- struct clk *ubc_iclk = clk_get(NULL, "ubc0");
- int i;
-
- /*
- * The UBC MSTP bit is optional, as not all platforms will have
- * it. Just ignore it if we can't find it.
- */
- if (IS_ERR(ubc_iclk))
- ubc_iclk = NULL;
-
- clk_enable(ubc_iclk);
-
- __raw_writel(0, UBC_CBCR);
-
- for (i = 0; i < sh4a_ubc.num_events; i++) {
- __raw_writel(0, UBC_CAMR(i));
- __raw_writel(0, UBC_CBR(i));
-
- __raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
-
- /* dummy read for write posting */
- (void)__raw_readl(UBC_CRR(i));
- }
-
- clk_disable(ubc_iclk);
-
- sh4a_ubc.clk = ubc_iclk;
-
- return register_sh_ubc(&sh4a_ubc);
-}
-arch_initcall(sh4a_ubc_init);
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
deleted file mode 100644
index 7581d5f03ce155..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-Mobile backends.
-#
-
-# Power Management & Sleep mode
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
deleted file mode 100644
index b0f9c8f8fd146a..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/cpuidle.c
- *
- * Cpuidle support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <linux/cpuidle.h>
-#include <linux/export.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-
-static unsigned long cpuidle_mode[] = {
- SUSP_SH_SLEEP, /* regular sleep mode */
- SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
- SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
-};
-
-static int cpuidle_sleep_enter(struct cpuidle_device *dev,
- struct cpuidle_driver *drv,
- int index)
-{
- unsigned long allowed_mode = SUSP_SH_SLEEP;
- int requested_state = index;
- int allowed_state;
- int k;
-
- /* convert allowed mode to allowed state */
- for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
- if (cpuidle_mode[k] == allowed_mode)
- break;
-
- allowed_state = k;
-
- /* take the following into account for sleep mode selection:
- * - allowed_state: best mode allowed by hardware (clock deps)
- * - requested_state: best mode allowed by software (latencies)
- */
- k = min_t(int, allowed_state, requested_state);
-
- sh_mobile_call_standby(cpuidle_mode[k]);
-
- return k;
-}
-
-static struct cpuidle_driver cpuidle_driver = {
- .name = "sh_idle",
- .owner = THIS_MODULE,
- .states = {
- {
- .exit_latency = 1,
- .target_residency = 1 * 2,
- .power_usage = 3,
- .enter = cpuidle_sleep_enter,
- .name = "C1",
- .desc = "SuperH Sleep Mode",
- },
- {
- .exit_latency = 100,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C2",
- .desc = "SuperH Sleep Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- {
- .exit_latency = 2300,
- .target_residency = 1 * 2,
- .power_usage = 1,
- .enter = cpuidle_sleep_enter,
- .name = "C3",
- .desc = "SuperH Mobile Standby Mode [SF]",
- .flags = CPUIDLE_FLAG_UNUSABLE,
- },
- },
- .safe_state_index = 0,
- .state_count = 3,
-};
-
-int __init sh_mobile_setup_cpuidle(void)
-{
- if (sh_mobile_sleep_supported & SUSP_SH_SF)
- cpuidle_driver.states[1].flags = CPUIDLE_FLAG_NONE;
-
- if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
- cpuidle_driver.states[2].flags = CPUIDLE_FLAG_NONE;
-
- return cpuidle_register(&cpuidle_driver, NULL);
-}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
deleted file mode 100644
index ca9945f51e51d4..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/shmobile/pm.c
- *
- * Power management support code for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/bl_bit.h>
-
-/*
- * Notifier lists for pre/post sleep notification
- */
-ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
-ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
-
-/*
- * Sleep modes available on SuperH Mobile:
- *
- * Sleep mode is just plain "sleep" instruction
- * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
- * Standby Self-Refresh mode is above plus stopped clocks
- */
-#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
-#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
-#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
-#define SUSP_MODE_RSTANDBY_SF \
- (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
- /*
- * U-standby mode is unsupported since it needs bootloader hacks
- */
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-#define RAM_BASE 0xfd800000 /* RSMEM */
-#else
-#define RAM_BASE 0xe5200000 /* ILRAM */
-#endif
-
-void sh_mobile_call_standby(unsigned long mode)
-{
- void *onchip_mem = (void *)RAM_BASE;
- struct sh_sleep_data *sdp = onchip_mem;
- void (*standby_onchip_mem)(unsigned long, unsigned long);
-
- /* code located directly after data structure */
- standby_onchip_mem = (void *)(sdp + 1);
-
- atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
- mode, NULL);
-
- /* flush the caches if MMU flag is set */
- if (mode & SUSP_SH_MMU)
- flush_cache_all();
-
- /* Let assembly snippet in on-chip memory handle the rest */
- standby_onchip_mem(mode, RAM_BASE);
-
- atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
- mode, NULL);
-}
-
-extern char sh_mobile_sleep_enter_start;
-extern char sh_mobile_sleep_enter_end;
-
-extern char sh_mobile_sleep_resume_start;
-extern char sh_mobile_sleep_resume_end;
-
-unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
-
-void sh_mobile_register_self_refresh(unsigned long flags,
- void *pre_start, void *pre_end,
- void *post_start, void *post_end)
-{
- void *onchip_mem = (void *)RAM_BASE;
- void *vp;
- struct sh_sleep_data *sdp;
- int n;
-
- /* part 0: data area */
- sdp = onchip_mem;
- sdp->addr.stbcr = 0xa4150020; /* STBCR */
- sdp->addr.bar = 0xa4150040; /* BAR */
- sdp->addr.pteh = 0xff000000; /* PTEH */
- sdp->addr.ptel = 0xff000004; /* PTEL */
- sdp->addr.ttb = 0xff000008; /* TTB */
- sdp->addr.tea = 0xff00000c; /* TEA */
- sdp->addr.mmucr = 0xff000010; /* MMUCR */
- sdp->addr.ptea = 0xff000034; /* PTEA */
- sdp->addr.pascr = 0xff000070; /* PASCR */
- sdp->addr.irmcr = 0xff000078; /* IRMCR */
- sdp->addr.ccr = 0xff00001c; /* CCR */
- sdp->addr.ramcr = 0xff000074; /* RAMCR */
- vp = sdp + 1;
-
- /* part 1: common code to enter sleep mode */
- n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
- memcpy(vp, &sh_mobile_sleep_enter_start, n);
- vp += roundup(n, 4);
-
- /* part 2: board specific code to enter self-refresh mode */
- n = pre_end - pre_start;
- memcpy(vp, pre_start, n);
- sdp->sf_pre = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 3: board specific code to resume from self-refresh mode */
- n = post_end - post_start;
- memcpy(vp, post_start, n);
- sdp->sf_post = (unsigned long)vp;
- vp += roundup(n, 4);
-
- /* part 4: common code to resume from sleep mode */
- WARN_ON(vp > (onchip_mem + 0x600));
- vp = onchip_mem + 0x600; /* located at interrupt vector */
- n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
- memcpy(vp, &sh_mobile_sleep_resume_start, n);
- sdp->resume = (unsigned long)vp;
-
- sh_mobile_sleep_supported |= flags;
-}
-
-static int sh_pm_enter(suspend_state_t state)
-{
- if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
- return -ENXIO;
-
- local_irq_disable();
- set_bl_bit();
- sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
- local_irq_disable();
- clear_bl_bit();
- return 0;
-}
-
-static const struct platform_suspend_ops sh_pm_ops = {
- .enter = sh_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init sh_pm_init(void)
-{
- suspend_set_ops(&sh_pm_ops);
- return sh_mobile_setup_cpuidle();
-}
-
-late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
deleted file mode 100644
index f928c03151296c..00000000000000
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
- *
- * Sleep mode and Standby modes support for SuperH Mobile
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-
-/*
- * Kernel mode register usage, see entry.S:
- * k0 scratch
- * k1 scratch
- */
-#define k0 r0
-#define k1 r1
-
-/* manage self-refresh and enter standby mode. must be self-contained.
- * this code will be copied to on-chip memory and executed from there.
- */
- .balign 4
-ENTRY(sh_mobile_sleep_enter_start)
-
- /* save mode flags */
- mov.l r4, @(SH_SLEEP_MODE, r5)
-
- /* save original vbr */
- stc vbr, r0
- mov.l r0, @(SH_SLEEP_VBR, r5)
-
- /* point vbr to our on-chip memory page */
- ldc r5, vbr
-
- /* save return address */
- sts pr, r0
- mov.l r0, @(SH_SLEEP_SPC, r5)
-
- /* save sr */
- stc sr, r0
- mov.l r0, @(SH_SLEEP_SR, r5)
-
- /* save general purpose registers to stack if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_regs_save
-
- sts.l pr, @-r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* make sure bank0 is selected, save low registers */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
- bsr save_low_regs
- nop
-
- /* switch to bank 1, save low registers */
- mov.l rb_bit, r10
- bsr set_sr
- mov #-1, r9
-
- bsr save_low_regs
- nop
-
- /* switch back to bank 0 */
- mov.l rb_bit, r9
- not r9, r9
- bsr set_sr
- mov #0, r10
-
-skip_regs_save:
-
- /* save sp, also set to internal ram */
- mov.l r15, @(SH_SLEEP_SP, r5)
- mov r5, r15
-
- /* save stbcr */
- bsr save_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* save mmu and cache context if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_mmu_save_disable
-
- /* save mmu state */
- bsr save_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_MMUCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- /* invalidate TLBs and disable the MMU */
- bsr get_register
- mov #SH_SLEEP_REG_MMUCR, r0
- mov #4, r1
- mov.l r1, @r0
- icbi @r0
-
- /* save cache registers and disable caches */
- bsr save_register
- mov #SH_SLEEP_REG_CCR, r0
-
- bsr save_register
- mov #SH_SLEEP_REG_RAMCR, r0
-
- bsr get_register
- mov #SH_SLEEP_REG_CCR, r0
- mov #0, r1
- mov.l r1, @r0
- icbi @r0
-
-skip_mmu_save_disable:
- /* call self-refresh entering code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_set_sf
-
- mov.l @(SH_SLEEP_SF_PRE, r5), r0
- jsr @r0
- nop
-
-skip_set_sf:
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_STANDBY, r0
- bt test_rstandby
-
- /* set mode to "software standby mode" */
- bra do_sleep
- mov #0x80, r1
-
-test_rstandby:
- tst #SUSP_SH_RSTANDBY, r0
- bt test_ustandby
-
- /* setup BAR register */
- bsr get_register
- mov #SH_SLEEP_REG_BAR, r0
- mov.l @(SH_SLEEP_RESUME, r5), r1
- mov.l r1, @r0
-
- /* set mode to "r-standby mode" */
- bra do_sleep
- mov #0x20, r1
-
-test_ustandby:
- tst #SUSP_SH_USTANDBY, r0
- bt force_sleep
-
- /* set mode to "u-standby mode" */
- bra do_sleep
- mov #0x10, r1
-
-force_sleep:
-
- /* set mode to "sleep mode" */
- mov #0x00, r1
-
-do_sleep:
- /* setup and enter selected standby mode */
- bsr get_register
- mov #SH_SLEEP_REG_STBCR, r0
- mov.l r1, @r0
-again:
- sleep
- bra again
- nop
-
-save_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_ADDR, r0
- mov.l @r1, r1
- add #SH_SLEEP_BASE_DATA, r0
- mov.l r1, @(r0, r5)
- add #-SH_SLEEP_BASE_DATA, r0
- rts
- nop
-
-get_register:
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- rts
- nop
-
-set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-save_low_regs:
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- rts
- mov.l r0, @-r15
-
- .balign 4
-rb_bit: .long 0x20000000 ! RB=1
-
-ENTRY(sh_mobile_sleep_enter_end)
-
- .balign 4
-ENTRY(sh_mobile_sleep_resume_start)
-
- /* figure out start address */
- bsr 0f
- nop
-0:
- sts pr, k1
- mov.l 1f, k0
- and k0, k1
-
- /* store pointer to data area in VBR */
- ldc k1, vbr
-
- /* setup sr with saved sr */
- mov.l @(SH_SLEEP_SR, k1), k0
- ldc k0, sr
-
- /* now: user register set! */
- stc vbr, r5
-
- /* setup spc with return address to c code */
- mov.l @(SH_SLEEP_SPC, r5), r0
- ldc r0, spc
-
- /* restore vbr */
- mov.l @(SH_SLEEP_VBR, r5), r0
- ldc r0, vbr
-
- /* setup ssr with saved sr */
- mov.l @(SH_SLEEP_SR, r5), r0
- ldc r0, ssr
-
- /* restore sp */
- mov.l @(SH_SLEEP_SP, r5), r15
-
- /* restore sleep mode register */
- bsr restore_register
- mov #SH_SLEEP_REG_STBCR, r0
-
- /* call self-refresh resume code if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_SF, r0
- bt skip_restore_sf
-
- mov.l @(SH_SLEEP_SF_POST, r5), r0
- jsr @r0
- nop
-
-skip_restore_sf:
- /* restore mmu and cache state if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_MMU, r0
- bt skip_restore_mmu
-
- /* restore mmu state */
- bsr restore_register
- mov #SH_SLEEP_REG_PTEH, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEL, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TTB, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_TEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PTEA, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_PASCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_IRMCR, r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_MMUCR, r0
- icbi @r0
-
- /* restore cache settings */
- bsr restore_register
- mov #SH_SLEEP_REG_RAMCR, r0
- icbi @r0
-
- bsr restore_register
- mov #SH_SLEEP_REG_CCR, r0
- icbi @r0
-
-skip_restore_mmu:
-
- /* restore general purpose registers if needed */
- mov.l @(SH_SLEEP_MODE, r5), r0
- tst #SUSP_SH_REGS, r0
- bt skip_restore_regs
-
- /* switch to bank 1, restore low registers */
- mov.l _rb_bit, r10
- bsr _set_sr
- mov #-1, r9
-
- bsr restore_low_regs
- nop
-
- /* switch to bank0, restore low registers */
- mov.l _rb_bit, r9
- not r9, r9
- bsr _set_sr
- mov #0, r10
-
- bsr restore_low_regs
- nop
-
- /* restore the rest of the registers */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- lds.l @r15+, pr
-
-skip_restore_regs:
- rte
- nop
-
-restore_register:
- add #SH_SLEEP_BASE_DATA, r0
- mov.l @(r0, r5), r1
- add #-SH_SLEEP_BASE_DATA, r0
- add #SH_SLEEP_BASE_ADDR, r0
- mov.l @(r0, r5), r0
- mov.l r1, @r0
- rts
- nop
-
-_set_sr:
- stc sr, r8
- and r9, r8
- or r10, r8
- ldc r8, sr
- rts
- nop
-
-restore_low_regs:
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- rts
- mov.l @r15+, r7
-
- .balign 4
-_rb_bit: .long 0x20000000 ! RB=1
-1: .long ~0x7ff
-ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
deleted file mode 100644
index 19ce6a950aaca8..00000000000000
--- a/arch/sh/kernel/crash_dump.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * crash_dump.c - Memory preserving reboot related code.
- *
- * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- * Copyright (C) IBM Corporation, 2004. All rights reserved
- */
-#include <linux/errno.h>
-#include <linux/crash_dump.h>
-#include <linux/io.h>
-#include <linux/uio.h>
-#include <linux/uaccess.h>
-
-ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
- size_t csize, unsigned long offset)
-{
- void __iomem *vaddr;
-
- if (!csize)
- return 0;
-
- vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
- csize = copy_to_iter(vaddr + offset, csize, iter);
- iounmap(vaddr);
-
- return csize;
-}
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
deleted file mode 100644
index ad07527e2a990a..00000000000000
--- a/arch/sh/kernel/debugtraps.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/debugtraps.S
- *
- * Debug trap jump tables for SuperH
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#if !defined(CONFIG_KGDB)
-#define singlestep_trap_handler debug_trap_handler
-#endif
-
-#if !defined(CONFIG_SH_STANDARD_BIOS)
-#define sh_bios_handler debug_trap_handler
-#endif
-
- .data
-
-ENTRY(debug_trap_table)
- .long debug_trap_handler /* 0x30 */
- .long debug_trap_handler /* 0x31 */
- .long debug_trap_handler /* 0x32 */
- .long debug_trap_handler /* 0x33 */
- .long debug_trap_handler /* 0x34 */
- .long debug_trap_handler /* 0x35 */
- .long debug_trap_handler /* 0x36 */
- .long debug_trap_handler /* 0x37 */
- .long debug_trap_handler /* 0x38 */
- .long debug_trap_handler /* 0x39 */
- .long debug_trap_handler /* 0x3a */
- .long debug_trap_handler /* 0x3b */
- .long breakpoint_trap_handler /* 0x3c */
- .long singlestep_trap_handler /* 0x3d */
- .long bug_trap_handler /* 0x3e */
- .long sh_bios_handler /* 0x3f */
diff --git a/arch/sh/kernel/disassemble.c b/arch/sh/kernel/disassemble.c
deleted file mode 100644
index 34e25a439c811c..00000000000000
--- a/arch/sh/kernel/disassemble.c
+++ /dev/null
@@ -1,572 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Disassemble SuperH instructions.
- *
- * Copyright (C) 1999 kaz Kojima
- * Copyright (C) 2008 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-/*
- * Format of an instruction in memory.
- */
-typedef enum {
- HEX_0, HEX_1, HEX_2, HEX_3, HEX_4, HEX_5, HEX_6, HEX_7,
- HEX_8, HEX_9, HEX_A, HEX_B, HEX_C, HEX_D, HEX_E, HEX_F,
- REG_N, REG_M, REG_NM, REG_B,
- BRANCH_12, BRANCH_8,
- DISP_8, DISP_4,
- IMM_4, IMM_4BY2, IMM_4BY4, PCRELIMM_8BY2, PCRELIMM_8BY4,
- IMM_8, IMM_8BY2, IMM_8BY4,
-} sh_nibble_type;
-
-typedef enum {
- A_END, A_BDISP12, A_BDISP8,
- A_DEC_M, A_DEC_N,
- A_DISP_GBR, A_DISP_PC, A_DISP_REG_M, A_DISP_REG_N,
- A_GBR,
- A_IMM,
- A_INC_M, A_INC_N,
- A_IND_M, A_IND_N, A_IND_R0_REG_M, A_IND_R0_REG_N,
- A_MACH, A_MACL,
- A_PR, A_R0, A_R0_GBR, A_REG_M, A_REG_N, A_REG_B,
- A_SR, A_VBR, A_SSR, A_SPC, A_SGR, A_DBR,
- F_REG_N, F_REG_M, D_REG_N, D_REG_M,
- X_REG_N, /* Only used for argument parsing */
- X_REG_M, /* Only used for argument parsing */
- DX_REG_N, DX_REG_M, V_REG_N, V_REG_M,
- FD_REG_N,
- XMTRX_M4,
- F_FR0,
- FPUL_N, FPUL_M, FPSCR_N, FPSCR_M,
-} sh_arg_type;
-
-static struct sh_opcode_info {
- char *name;
- sh_arg_type arg[7];
- sh_nibble_type nibbles[4];
-} sh_table[] = {
- {"add",{A_IMM,A_REG_N},{HEX_7,REG_N,IMM_8}},
- {"add",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_C}},
- {"addc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_E}},
- {"addv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_F}},
- {"and",{A_IMM,A_R0},{HEX_C,HEX_9,IMM_8}},
- {"and",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_9}},
- {"and.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_D,IMM_8}},
- {"bra",{A_BDISP12},{HEX_A,BRANCH_12}},
- {"bsr",{A_BDISP12},{HEX_B,BRANCH_12}},
- {"bt",{A_BDISP8},{HEX_8,HEX_9,BRANCH_8}},
- {"bf",{A_BDISP8},{HEX_8,HEX_B,BRANCH_8}},
- {"bt.s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bt/s",{A_BDISP8},{HEX_8,HEX_D,BRANCH_8}},
- {"bf.s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"bf/s",{A_BDISP8},{HEX_8,HEX_F,BRANCH_8}},
- {"clrmac",{0},{HEX_0,HEX_0,HEX_2,HEX_8}},
- {"clrs",{0},{HEX_0,HEX_0,HEX_4,HEX_8}},
- {"clrt",{0},{HEX_0,HEX_0,HEX_0,HEX_8}},
- {"cmp/eq",{A_IMM,A_R0},{HEX_8,HEX_8,IMM_8}},
- {"cmp/eq",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_0}},
- {"cmp/ge",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_3}},
- {"cmp/gt",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_7}},
- {"cmp/hi",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_6}},
- {"cmp/hs",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_2}},
- {"cmp/pl",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_5}},
- {"cmp/pz",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_1}},
- {"cmp/str",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_C}},
- {"div0s",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_7}},
- {"div0u",{0},{HEX_0,HEX_0,HEX_1,HEX_9}},
- {"div1",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_4}},
- {"exts.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_E}},
- {"exts.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_F}},
- {"extu.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_C}},
- {"extu.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_D}},
- {"jmp",{A_IND_N},{HEX_4,REG_N,HEX_2,HEX_B}},
- {"jsr",{A_IND_N},{HEX_4,REG_N,HEX_0,HEX_B}},
- {"ldc",{A_REG_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_E}},
- {"ldc",{A_REG_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_E}},
- {"ldc",{A_REG_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_E}},
- {"ldc",{A_REG_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_E}},
- {"ldc",{A_REG_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_E}},
- {"ldc",{A_REG_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_E}},
- {"ldc",{A_REG_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_E}},
- {"ldc.l",{A_INC_N,A_SR},{HEX_4,REG_N,HEX_0,HEX_7}},
- {"ldc.l",{A_INC_N,A_GBR},{HEX_4,REG_N,HEX_1,HEX_7}},
- {"ldc.l",{A_INC_N,A_VBR},{HEX_4,REG_N,HEX_2,HEX_7}},
- {"ldc.l",{A_INC_N,A_SSR},{HEX_4,REG_N,HEX_3,HEX_7}},
- {"ldc.l",{A_INC_N,A_SPC},{HEX_4,REG_N,HEX_4,HEX_7}},
- {"ldc.l",{A_INC_N,A_DBR},{HEX_4,REG_N,HEX_7,HEX_7}},
- {"ldc.l",{A_INC_N,A_REG_B},{HEX_4,REG_N,REG_B,HEX_7}},
- {"lds",{A_REG_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_A}},
- {"lds",{A_REG_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_A}},
- {"lds",{A_REG_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_A}},
- {"lds",{A_REG_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_A}},
- {"lds",{A_REG_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_A}},
- {"lds.l",{A_INC_N,A_MACH},{HEX_4,REG_N,HEX_0,HEX_6}},
- {"lds.l",{A_INC_N,A_MACL},{HEX_4,REG_N,HEX_1,HEX_6}},
- {"lds.l",{A_INC_N,A_PR},{HEX_4,REG_N,HEX_2,HEX_6}},
- {"lds.l",{A_INC_M,FPUL_N},{HEX_4,REG_M,HEX_5,HEX_6}},
- {"lds.l",{A_INC_M,FPSCR_N},{HEX_4,REG_M,HEX_6,HEX_6}},
- {"ldtlb",{0},{HEX_0,HEX_0,HEX_3,HEX_8}},
- {"mac.w",{A_INC_M,A_INC_N},{HEX_4,REG_N,REG_M,HEX_F}},
- {"mov",{A_IMM,A_REG_N},{HEX_E,REG_N,IMM_8}},
- {"mov",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_3}},
- {"mov.b",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_4}},
- {"mov.b",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_DISP_REG_M,A_R0},{HEX_8,HEX_4,REG_M,IMM_4}},
- {"mov.b",{A_DISP_GBR,A_R0},{HEX_C,HEX_4,IMM_8}},
- {"mov.b",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_C}},
- {"mov.b",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_4}},
- {"mov.b",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_0}},
- {"mov.b",{A_R0,A_DISP_REG_M},{HEX_8,HEX_0,REG_M,IMM_4}},
- {"mov.b",{A_R0,A_DISP_GBR},{HEX_C,HEX_0,IMM_8}},
- {"mov.l",{ A_REG_M,A_DISP_REG_N},{HEX_1,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_6}},
- {"mov.l",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_DISP_REG_M,A_REG_N},{HEX_5,REG_N,REG_M,IMM_4BY4}},
- {"mov.l",{A_DISP_GBR,A_R0},{HEX_C,HEX_6,IMM_8BY4}},
- {"mov.l",{A_DISP_PC,A_REG_N},{HEX_D,REG_N,PCRELIMM_8BY4}},
- {"mov.l",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_E}},
- {"mov.l",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_6}},
- {"mov.l",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_2}},
- {"mov.l",{A_R0,A_DISP_GBR},{HEX_C,HEX_2,IMM_8BY4}},
- {"mov.w",{ A_REG_M,A_IND_R0_REG_N},{HEX_0,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_DEC_N},{HEX_2,REG_N,REG_M,HEX_5}},
- {"mov.w",{ A_REG_M,A_IND_N},{HEX_2,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_DISP_REG_M,A_R0},{HEX_8,HEX_5,REG_M,IMM_4BY2}},
- {"mov.w",{A_DISP_GBR,A_R0},{HEX_C,HEX_5,IMM_8BY2}},
- {"mov.w",{A_DISP_PC,A_REG_N},{HEX_9,REG_N,PCRELIMM_8BY2}},
- {"mov.w",{A_IND_R0_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_D}},
- {"mov.w",{A_INC_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_5}},
- {"mov.w",{A_IND_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_1}},
- {"mov.w",{A_R0,A_DISP_REG_M},{HEX_8,HEX_1,REG_M,IMM_4BY2}},
- {"mov.w",{A_R0,A_DISP_GBR},{HEX_C,HEX_1,IMM_8BY2}},
- {"mova",{A_DISP_PC,A_R0},{HEX_C,HEX_7,PCRELIMM_8BY4}},
- {"movca.l",{A_R0,A_IND_N},{HEX_0,REG_N,HEX_C,HEX_3}},
- {"movt",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_9}},
- {"muls",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_F}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"mulu",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_E}},
- {"neg",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_B}},
- {"negc",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_A}},
- {"nop",{0},{HEX_0,HEX_0,HEX_0,HEX_9}},
- {"not",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_7}},
- {"ocbi",{A_IND_N},{HEX_0,REG_N,HEX_9,HEX_3}},
- {"ocbp",{A_IND_N},{HEX_0,REG_N,HEX_A,HEX_3}},
- {"ocbwb",{A_IND_N},{HEX_0,REG_N,HEX_B,HEX_3}},
- {"or",{A_IMM,A_R0},{HEX_C,HEX_B,IMM_8}},
- {"or",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_B}},
- {"or.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_F,IMM_8}},
- {"pref",{A_IND_N},{HEX_0,REG_N,HEX_8,HEX_3}},
- {"rotcl",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_4}},
- {"rotcr",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_5}},
- {"rotl",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_4}},
- {"rotr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_5}},
- {"rte",{0},{HEX_0,HEX_0,HEX_2,HEX_B}},
- {"rts",{0},{HEX_0,HEX_0,HEX_0,HEX_B}},
- {"sets",{0},{HEX_0,HEX_0,HEX_5,HEX_8}},
- {"sett",{0},{HEX_0,HEX_0,HEX_1,HEX_8}},
- {"shad",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_C}},
- {"shld",{ A_REG_M,A_REG_N},{HEX_4,REG_N,REG_M,HEX_D}},
- {"shal",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_0}},
- {"shar",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_1}},
- {"shll",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_0}},
- {"shll16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_8}},
- {"shll2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_8}},
- {"shll8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_8}},
- {"shlr",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_1}},
- {"shlr16",{A_REG_N},{HEX_4,REG_N,HEX_2,HEX_9}},
- {"shlr2",{A_REG_N},{HEX_4,REG_N,HEX_0,HEX_9}},
- {"shlr8",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_9}},
- {"sleep",{0},{HEX_0,HEX_0,HEX_1,HEX_B}},
- {"stc",{A_SR,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_2}},
- {"stc",{A_GBR,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_2}},
- {"stc",{A_VBR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_2}},
- {"stc",{A_SSR,A_REG_N},{HEX_0,REG_N,HEX_3,HEX_2}},
- {"stc",{A_SPC,A_REG_N},{HEX_0,REG_N,HEX_4,HEX_2}},
- {"stc",{A_SGR,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_2}},
- {"stc",{A_DBR,A_REG_N},{HEX_0,REG_N,HEX_7,HEX_2}},
- {"stc",{A_REG_B,A_REG_N},{HEX_0,REG_N,REG_B,HEX_2}},
- {"stc.l",{A_SR,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_3}},
- {"stc.l",{A_GBR,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_3}},
- {"stc.l",{A_VBR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_3}},
- {"stc.l",{A_SSR,A_DEC_N},{HEX_4,REG_N,HEX_3,HEX_3}},
- {"stc.l",{A_SPC,A_DEC_N},{HEX_4,REG_N,HEX_4,HEX_3}},
- {"stc.l",{A_SGR,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_3}},
- {"stc.l",{A_DBR,A_DEC_N},{HEX_4,REG_N,HEX_7,HEX_3}},
- {"stc.l",{A_REG_B,A_DEC_N},{HEX_4,REG_N,REG_B,HEX_3}},
- {"sts",{A_MACH,A_REG_N},{HEX_0,REG_N,HEX_0,HEX_A}},
- {"sts",{A_MACL,A_REG_N},{HEX_0,REG_N,HEX_1,HEX_A}},
- {"sts",{A_PR,A_REG_N},{HEX_0,REG_N,HEX_2,HEX_A}},
- {"sts",{FPUL_M,A_REG_N},{HEX_0,REG_N,HEX_5,HEX_A}},
- {"sts",{FPSCR_M,A_REG_N},{HEX_0,REG_N,HEX_6,HEX_A}},
- {"sts.l",{A_MACH,A_DEC_N},{HEX_4,REG_N,HEX_0,HEX_2}},
- {"sts.l",{A_MACL,A_DEC_N},{HEX_4,REG_N,HEX_1,HEX_2}},
- {"sts.l",{A_PR,A_DEC_N},{HEX_4,REG_N,HEX_2,HEX_2}},
- {"sts.l",{FPUL_M,A_DEC_N},{HEX_4,REG_N,HEX_5,HEX_2}},
- {"sts.l",{FPSCR_M,A_DEC_N},{HEX_4,REG_N,HEX_6,HEX_2}},
- {"sub",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_8}},
- {"subc",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_A}},
- {"subv",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_B}},
- {"swap.b",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_8}},
- {"swap.w",{ A_REG_M,A_REG_N},{HEX_6,REG_N,REG_M,HEX_9}},
- {"tas.b",{A_IND_N},{HEX_4,REG_N,HEX_1,HEX_B}},
- {"trapa",{A_IMM},{HEX_C,HEX_3,IMM_8}},
- {"tst",{A_IMM,A_R0},{HEX_C,HEX_8,IMM_8}},
- {"tst",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_8}},
- {"tst.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_C,IMM_8}},
- {"xor",{A_IMM,A_R0},{HEX_C,HEX_A,IMM_8}},
- {"xor",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_A}},
- {"xor.b",{A_IMM,A_R0_GBR},{HEX_C,HEX_E,IMM_8}},
- {"xtrct",{ A_REG_M,A_REG_N},{HEX_2,REG_N,REG_M,HEX_D}},
- {"mul.l",{ A_REG_M,A_REG_N},{HEX_0,REG_N,REG_M,HEX_7}},
- {"dt",{A_REG_N},{HEX_4,REG_N,HEX_1,HEX_0}},
- {"dmuls.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_D}},
- {"dmulu.l",{ A_REG_M,A_REG_N},{HEX_3,REG_N,REG_M,HEX_5}},
- {"mac.l",{A_INC_M,A_INC_N},{HEX_0,REG_N,REG_M,HEX_F}},
- {"braf",{A_REG_N},{HEX_0,REG_N,HEX_2,HEX_3}},
- {"bsrf",{A_REG_N},{HEX_0,REG_N,HEX_0,HEX_3}},
- {"fabs",{FD_REG_N},{HEX_F,REG_N,HEX_5,HEX_D}},
- {"fadd",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fadd",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_0}},
- {"fcmp/eq",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/eq",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_4}},
- {"fcmp/gt",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcmp/gt",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_5}},
- {"fcnvds",{D_REG_N,FPUL_M},{HEX_F,REG_N,HEX_B,HEX_D}},
- {"fcnvsd",{FPUL_M,D_REG_N},{HEX_F,REG_N,HEX_A,HEX_D}},
- {"fdiv",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fdiv",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_3}},
- {"fipr",{V_REG_M,V_REG_N},{HEX_F,REG_NM,HEX_E,HEX_D}},
- {"fldi0",{F_REG_N},{HEX_F,REG_N,HEX_8,HEX_D}},
- {"fldi1",{F_REG_N},{HEX_F,REG_N,HEX_9,HEX_D}},
- {"flds",{F_REG_N,FPUL_M},{HEX_F,REG_N,HEX_1,HEX_D}},
- {"float",{FPUL_M,FD_REG_N},{HEX_F,REG_N,HEX_2,HEX_D}},
- {"fmac",{F_FR0,F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_E}},
- {"fmov",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{DX_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_C}},
- {"fmov",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.d",{A_IND_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.d",{DX_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.d",{A_INC_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.d",{DX_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.d",{A_IND_R0_REG_M,DX_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.d",{DX_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmov.s",{A_IND_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_8}},
- {"fmov.s",{F_REG_M,A_IND_N},{HEX_F,REG_N,REG_M,HEX_A}},
- {"fmov.s",{A_INC_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_9}},
- {"fmov.s",{F_REG_M,A_DEC_N},{HEX_F,REG_N,REG_M,HEX_B}},
- {"fmov.s",{A_IND_R0_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_6}},
- {"fmov.s",{F_REG_M,A_IND_R0_REG_N},{HEX_F,REG_N,REG_M,HEX_7}},
- {"fmul",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fmul",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_2}},
- {"fneg",{FD_REG_N},{HEX_F,REG_N,HEX_4,HEX_D}},
- {"frchg",{0},{HEX_F,HEX_B,HEX_F,HEX_D}},
- {"fschg",{0},{HEX_F,HEX_3,HEX_F,HEX_D}},
- {"fsqrt",{FD_REG_N},{HEX_F,REG_N,HEX_6,HEX_D}},
- {"fsts",{FPUL_M,F_REG_N},{HEX_F,REG_N,HEX_0,HEX_D}},
- {"fsub",{F_REG_M,F_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"fsub",{D_REG_M,D_REG_N},{HEX_F,REG_N,REG_M,HEX_1}},
- {"ftrc",{FD_REG_N,FPUL_M},{HEX_F,REG_N,HEX_3,HEX_D}},
- {"ftrv",{XMTRX_M4,V_REG_N},{HEX_F,REG_NM,HEX_F,HEX_D}},
- { 0 },
-};
-
-static void print_sh_insn(u32 memaddr, u16 insn)
-{
- int relmask = ~0;
- int nibs[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, insn & 0xf};
- int lastsp;
- struct sh_opcode_info *op = sh_table;
-
- for (; op->name; op++) {
- int n;
- int imm = 0;
- int rn = 0;
- int rm = 0;
- int rb = 0;
- int disp_pc;
- int disp_pc_addr = 0;
-
- for (n = 0; n < 4; n++) {
- int i = op->nibbles[n];
-
- if (i < 16) {
- if (nibs[n] == i)
- continue;
- goto fail;
- }
- switch (i) {
- case BRANCH_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x80)
- imm |= ~0xff;
- imm = ((char)imm) * 2 + 4 ;
- goto ok;
- case BRANCH_12:
- imm = ((nibs[1]) << 8) | (nibs[2] << 4) | (nibs[3]);
- if (imm & 0x800)
- imm |= ~0xfff;
- imm = imm * 2 + 4;
- goto ok;
- case IMM_4:
- imm = nibs[3];
- goto ok;
- case IMM_4BY2:
- imm = nibs[3] <<1;
- goto ok;
- case IMM_4BY4:
- imm = nibs[3] <<2;
- goto ok;
- case IMM_8:
- imm = (nibs[2] << 4) | nibs[3];
- goto ok;
- case PCRELIMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- relmask = ~1;
- goto ok;
- case PCRELIMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- relmask = ~3;
- goto ok;
- case IMM_8BY2:
- imm = ((nibs[2] << 4) | nibs[3]) <<1;
- goto ok;
- case IMM_8BY4:
- imm = ((nibs[2] << 4) | nibs[3]) <<2;
- goto ok;
- case DISP_8:
- imm = (nibs[2] << 4) | (nibs[3]);
- goto ok;
- case DISP_4:
- imm = nibs[3];
- goto ok;
- case REG_N:
- rn = nibs[n];
- break;
- case REG_M:
- rm = nibs[n];
- break;
- case REG_NM:
- rn = (nibs[n] & 0xc) >> 2;
- rm = (nibs[n] & 0x3);
- break;
- case REG_B:
- rb = nibs[n] & 0x07;
- break;
- default:
- return;
- }
- }
-
- ok:
- pr_cont("%-8s ", op->name);
- lastsp = (op->arg[0] == A_END);
- disp_pc = 0;
- for (n = 0; n < 6 && op->arg[n] != A_END; n++) {
- if (n && op->arg[1] != A_END)
- pr_cont(", ");
- switch (op->arg[n]) {
- case A_IMM:
- pr_cont("#%d", (char)(imm));
- break;
- case A_R0:
- pr_cont("r0");
- break;
- case A_REG_N:
- pr_cont("r%d", rn);
- break;
- case A_INC_N:
- pr_cont("@r%d+", rn);
- break;
- case A_DEC_N:
- pr_cont("@-r%d", rn);
- break;
- case A_IND_N:
- pr_cont("@r%d", rn);
- break;
- case A_DISP_REG_N:
- pr_cont("@(%d,r%d)", imm, rn);
- break;
- case A_REG_M:
- pr_cont("r%d", rm);
- break;
- case A_INC_M:
- pr_cont("@r%d+", rm);
- break;
- case A_DEC_M:
- pr_cont("@-r%d", rm);
- break;
- case A_IND_M:
- pr_cont("@r%d", rm);
- break;
- case A_DISP_REG_M:
- pr_cont("@(%d,r%d)", imm, rm);
- break;
- case A_REG_B:
- pr_cont("r%d_bank", rb);
- break;
- case A_DISP_PC:
- disp_pc = 1;
- disp_pc_addr = imm + 4 + (memaddr & relmask);
- pr_cont("%08x <%pS>", disp_pc_addr,
- (void *)disp_pc_addr);
- break;
- case A_IND_R0_REG_N:
- pr_cont("@(r0,r%d)", rn);
- break;
- case A_IND_R0_REG_M:
- pr_cont("@(r0,r%d)", rm);
- break;
- case A_DISP_GBR:
- pr_cont("@(%d,gbr)", imm);
- break;
- case A_R0_GBR:
- pr_cont("@(r0,gbr)");
- break;
- case A_BDISP12:
- case A_BDISP8:
- pr_cont("%08x", imm + memaddr);
- break;
- case A_SR:
- pr_cont("sr");
- break;
- case A_GBR:
- pr_cont("gbr");
- break;
- case A_VBR:
- pr_cont("vbr");
- break;
- case A_SSR:
- pr_cont("ssr");
- break;
- case A_SPC:
- pr_cont("spc");
- break;
- case A_MACH:
- pr_cont("mach");
- break;
- case A_MACL:
- pr_cont("macl");
- break;
- case A_PR:
- pr_cont("pr");
- break;
- case A_SGR:
- pr_cont("sgr");
- break;
- case A_DBR:
- pr_cont("dbr");
- break;
- case FD_REG_N:
- case F_REG_N:
- pr_cont("fr%d", rn);
- break;
- case F_REG_M:
- pr_cont("fr%d", rm);
- break;
- case DX_REG_N:
- if (rn & 1) {
- pr_cont("xd%d", rn & ~1);
- break;
- }
- fallthrough;
- case D_REG_N:
- pr_cont("dr%d", rn);
- break;
- case DX_REG_M:
- if (rm & 1) {
- pr_cont("xd%d", rm & ~1);
- break;
- }
- fallthrough;
- case D_REG_M:
- pr_cont("dr%d", rm);
- break;
- case FPSCR_M:
- case FPSCR_N:
- pr_cont("fpscr");
- break;
- case FPUL_M:
- case FPUL_N:
- pr_cont("fpul");
- break;
- case F_FR0:
- pr_cont("fr0");
- break;
- case V_REG_N:
- pr_cont("fv%d", rn*4);
- break;
- case V_REG_M:
- pr_cont("fv%d", rm*4);
- break;
- case XMTRX_M4:
- pr_cont("xmtrx");
- break;
- default:
- return;
- }
- }
-
- if (disp_pc && strcmp(op->name, "mova") != 0) {
- u32 val;
-
- if (relmask == ~1)
- __get_user(val, (u16 *)disp_pc_addr);
- else
- __get_user(val, (u32 *)disp_pc_addr);
-
- pr_cont(" ! %08x <%pS>", val, (void *)val);
- }
-
- return;
- fail:
- ;
-
- }
-
- pr_info(".word 0x%x%x%x%x", nibs[0], nibs[1], nibs[2], nibs[3]);
-}
-
-void show_code(struct pt_regs *regs)
-{
- unsigned short *pc = (unsigned short *)regs->pc;
- long i;
-
- if (regs->pc & 0x1)
- return;
-
- pr_info("Code:\n");
-
- for (i = -3 ; i < 6 ; i++) {
- unsigned short insn;
-
- if (__get_user(insn, pc + i)) {
- pr_err(" (Bad address in pc)\n");
- break;
- }
-
- pr_info("%s%08lx: ", (i ? " " : "->"),
- (unsigned long)(pc + i));
- print_sh_insn((unsigned long)(pc + i), insn);
- pr_cont("\n");
- }
-
- pr_info("\n");
-}
diff --git a/arch/sh/kernel/dma-coherent.c b/arch/sh/kernel/dma-coherent.c
deleted file mode 100644
index 6a44c0e7ba40ef..00000000000000
--- a/arch/sh/kernel/dma-coherent.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/dma-map-ops.h>
-#include <asm/cacheflush.h>
-#include <asm/addrspace.h>
-
-void arch_dma_prep_coherent(struct page *page, size_t size)
-{
- __flush_purge_region(page_address(page), size);
-}
-
-void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
- enum dma_data_direction dir)
-{
- void *addr = sh_cacheop_vaddr(phys_to_virt(paddr));
-
- switch (dir) {
- case DMA_FROM_DEVICE: /* invalidate only */
- __flush_invalidate_region(addr, size);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- __flush_wback_region(addr, size);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- __flush_purge_region(addr, size);
- break;
- default:
- BUG();
- }
-}
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
deleted file mode 100644
index 758a6c89e911bc..00000000000000
--- a/arch/sh/kernel/dumpstack.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2002 - 2012 Paul Mundt
- */
-#include <linux/kallsyms.h>
-#include <linux/ftrace.h>
-#include <linux/debug_locks.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kdebug.h>
-#include <linux/export.h>
-#include <linux/uaccess.h>
-#include <asm/unwinder.h>
-#include <asm/stacktrace.h>
-
-void dump_mem(const char *str, const char *loglvl, unsigned long bottom,
- unsigned long top)
-{
- unsigned long p;
- int i;
-
- printk("%s%s(0x%08lx to 0x%08lx)\n", loglvl, str, bottom, top);
-
- for (p = bottom & ~31; p < top; ) {
- printk("%s%04lx: ", loglvl, p & 0xffff);
-
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
-
- if (p < bottom || p >= top)
- pr_cont(" ");
- else {
- if (__get_user(val, (unsigned int __user *)p)) {
- pr_cont("\n");
- return;
- }
- pr_cont("%08x ", val);
- }
- }
- pr_cont("\n");
- }
-}
-
-void printk_address(unsigned long address, int reliable)
-{
- pr_cont(" [<%px>] %s%pS\n", (void *) address,
- reliable ? "" : "? ", (void *) address);
-}
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{
- struct task_struct *task = tinfo->task;
- struct ftrace_ret_stack *ret_stack;
- unsigned long ret_addr;
-
- if (addr != (unsigned long)return_to_handler)
- return;
-
- if (!task->ret_stack)
- return;
-
- ret_stack = ftrace_graph_get_ret_stack(task, *graph);
- if (!ret_stack)
- return;
-
- ret_addr = ret_stack->ret;
-
- ops->address(data, ret_addr, 1);
-
- (*graph)++;
-}
-#else
-static inline void
-print_ftrace_graph_addr(unsigned long addr, void *data,
- const struct stacktrace_ops *ops,
- struct thread_info *tinfo, int *graph)
-{ }
-#endif
-
-void
-stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- struct thread_info *context;
- int graph = 0;
-
- context = (struct thread_info *)
- ((unsigned long)sp & (~(THREAD_SIZE - 1)));
-
- while (!kstack_end(sp)) {
- unsigned long addr = *sp++;
-
- if (__kernel_text_address(addr)) {
- ops->address(data, addr, 1);
-
- print_ftrace_graph_addr(addr, data, ops,
- context, &graph);
- }
- }
-}
-
-/*
- * Print one address/symbol entries per line.
- */
-static void print_trace_address(void *data, unsigned long addr, int reliable)
-{
- printk("%s", (char *)data);
- printk_address(addr, reliable);
-}
-
-static const struct stacktrace_ops print_trace_ops = {
- .address = print_trace_address,
-};
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs, const char *loglvl)
-{
- if (regs && user_mode(regs))
- return;
-
- printk("%s\nCall trace:\n", loglvl);
-
- unwind_stack(tsk, regs, sp, &print_trace_ops, (void *)loglvl);
-
- pr_cont("\n");
-
- if (!tsk)
- tsk = current;
-
- debug_show_held_locks(tsk);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
-{
- unsigned long stack;
-
- if (!tsk)
- tsk = current;
- if (tsk == current)
- sp = (unsigned long *)current_stack_pointer;
- else
- sp = (unsigned long *)tsk->thread.sp;
-
- stack = (unsigned long)sp;
- dump_mem("Stack: ", loglvl, stack, THREAD_SIZE +
- (unsigned long)task_stack_page(tsk));
- show_trace(tsk, sp, NULL, loglvl);
-}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
deleted file mode 100644
index bf8682e7183030..00000000000000
--- a/arch/sh/kernel/dwarf.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
- *
- * This is an implementation of a DWARF unwinder. Its main purpose is
- * for generating stacktrace information. Based on the DWARF 3
- * specification from http://www.dwarfstd.org.
- *
- * TODO:
- * - DWARF64 doesn't work.
- * - Registers with DWARF_VAL_OFFSET rules aren't handled properly.
- */
-
-/* #define DEBUG */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/mempool.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/dwarf.h>
-#include <asm/unwinder.h>
-#include <asm/sections.h>
-#include <asm/unaligned.h>
-#include <asm/stacktrace.h>
-
-/* Reserve enough memory for two stack frames */
-#define DWARF_FRAME_MIN_REQ 2
-/* ... with 4 registers per frame. */
-#define DWARF_REG_MIN_REQ (DWARF_FRAME_MIN_REQ * 4)
-
-static struct kmem_cache *dwarf_frame_cachep;
-static mempool_t *dwarf_frame_pool;
-
-static struct kmem_cache *dwarf_reg_cachep;
-static mempool_t *dwarf_reg_pool;
-
-static struct rb_root cie_root;
-static DEFINE_SPINLOCK(dwarf_cie_lock);
-
-static struct rb_root fde_root;
-static DEFINE_SPINLOCK(dwarf_fde_lock);
-
-static struct dwarf_cie *cached_cie;
-
-static unsigned int dwarf_unwinder_ready;
-
-/**
- * dwarf_frame_alloc_reg - allocate memory for a DWARF register
- * @frame: the DWARF frame whose list of registers we insert on
- * @reg_num: the register number
- *
- * Allocate space for, and initialise, a dwarf reg from
- * dwarf_reg_pool and insert it onto the (unsorted) linked-list of
- * dwarf registers for @frame.
- *
- * Return the initialised DWARF reg.
- */
-static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
- if (!reg) {
- printk(KERN_WARNING "Unable to allocate a DWARF register\n");
- /*
- * Let's just bomb hard here, we have no way to
- * gracefully recover.
- */
- UNWINDER_BUG();
- }
-
- reg->number = reg_num;
- reg->addr = 0;
- reg->flags = 0;
-
- list_add(®->link, &frame->reg_list);
-
- return reg;
-}
-
-static void dwarf_frame_free_regs(struct dwarf_frame *frame)
-{
- struct dwarf_reg *reg, *n;
-
- list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
- list_del(®->link);
- mempool_free(reg, dwarf_reg_pool);
- }
-}
-
-/**
- * dwarf_frame_reg - return a DWARF register
- * @frame: the DWARF frame to search in for @reg_num
- * @reg_num: the register number to search for
- *
- * Lookup and return the dwarf reg @reg_num for this frame. Return
- * NULL if @reg_num is an register invalid number.
- */
-static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
- unsigned int reg_num)
-{
- struct dwarf_reg *reg;
-
- list_for_each_entry(reg, &frame->reg_list, link) {
- if (reg->number == reg_num)
- return reg;
- }
-
- return NULL;
-}
-
-/**
- * dwarf_read_addr - read dwarf data
- * @src: source address of data
- * @dst: destination address to store the data to
- *
- * Read 'n' bytes from @src, where 'n' is the size of an address on
- * the native machine. We return the number of bytes read, which
- * should always be 'n'. We also have to be careful when reading
- * from @src and writing to @dst, because they can be arbitrarily
- * aligned. Return 'n' - the number of bytes read.
- */
-static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
-{
- u32 val = get_unaligned(src);
- put_unaligned(val, dst);
- return sizeof(unsigned long *);
-}
-
-/**
- * dwarf_read_uleb128 - read unsigned LEB128 data
- * @addr: the address where the ULEB128 data is stored
- * @ret: address to store the result
- *
- * Decode an unsigned LEB128 encoded datum. The algorithm is taken
- * from Appendix C of the DWARF 3 spec. For information on the
- * encodings refer to section "7.6 - Variable Length Data". Return
- * the number of bytes read.
- */
-static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
-{
- unsigned int result;
- unsigned char byte;
- int shift, count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- count++;
-
- result |= (byte & 0x7f) << shift;
- shift += 7;
-
- if (!(byte & 0x80))
- break;
- }
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_leb128 - read signed LEB128 data
- * @addr: the address of the LEB128 encoded data
- * @ret: address to store the result
- *
- * Decode signed LEB128 data. The algorithm is taken from Appendix
- * C of the DWARF 3 spec. Return the number of bytes read.
- */
-static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
-{
- unsigned char byte;
- int result, shift;
- int num_bits;
- int count;
-
- result = 0;
- shift = 0;
- count = 0;
-
- while (1) {
- byte = __raw_readb(addr);
- addr++;
- result |= (byte & 0x7f) << shift;
- shift += 7;
- count++;
-
- if (!(byte & 0x80))
- break;
- }
-
- /* The number of bits in a signed integer. */
- num_bits = 8 * sizeof(result);
-
- if ((shift < num_bits) && (byte & 0x40))
- result |= (-1 << shift);
-
- *ret = result;
-
- return count;
-}
-
-/**
- * dwarf_read_encoded_value - return the decoded value at @addr
- * @addr: the address of the encoded value
- * @val: where to write the decoded value
- * @encoding: the encoding with which we can decode @addr
- *
- * GCC emits encoded address in the .eh_frame FDE entries. Decode
- * the value at @addr using @encoding. The decoded value is written
- * to @val and the number of bytes read is returned.
- */
-static int dwarf_read_encoded_value(char *addr, unsigned long *val,
- char encoding)
-{
- unsigned long decoded_addr = 0;
- int count = 0;
-
- switch (encoding & 0x70) {
- case DW_EH_PE_absptr:
- break;
- case DW_EH_PE_pcrel:
- decoded_addr = (unsigned long)addr;
- break;
- default:
- pr_debug("encoding=0x%x\n", (encoding & 0x70));
- UNWINDER_BUG();
- }
-
- if ((encoding & 0x07) == 0x00)
- encoding |= DW_EH_PE_udata4;
-
- switch (encoding & 0x0f) {
- case DW_EH_PE_sdata4:
- case DW_EH_PE_udata4:
- count += 4;
- decoded_addr += get_unaligned((u32 *)addr);
- __raw_writel(decoded_addr, val);
- break;
- default:
- pr_debug("encoding=0x%x\n", encoding);
- UNWINDER_BUG();
- }
-
- return count;
-}
-
-/**
- * dwarf_entry_len - return the length of an FDE or CIE
- * @addr: the address of the entry
- * @len: the length of the entry
- *
- * Read the initial_length field of the entry and store the size of
- * the entry in @len. We return the number of bytes read. Return a
- * count of 0 on error.
- */
-static inline int dwarf_entry_len(char *addr, unsigned long *len)
-{
- u32 initial_len;
- int count;
-
- initial_len = get_unaligned((u32 *)addr);
- count = 4;
-
- /*
- * An initial length field value in the range DW_LEN_EXT_LO -
- * DW_LEN_EXT_HI indicates an extension, and should not be
- * interpreted as a length. The only extension that we currently
- * understand is the use of DWARF64 addresses.
- */
- if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
- /*
- * The 64-bit length field immediately follows the
- * compulsory 32-bit length field.
- */
- if (initial_len == DW_EXT_DWARF64) {
- *len = get_unaligned((u64 *)addr + 4);
- count = 12;
- } else {
- printk(KERN_WARNING "Unknown DWARF extension\n");
- count = 0;
- }
- } else
- *len = initial_len;
-
- return count;
-}
-
-/**
- * dwarf_lookup_cie - locate the cie
- * @cie_ptr: pointer to help with lookup
- */
-static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct dwarf_cie *cie = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- /*
- * We've cached the last CIE we looked up because chances are
- * that the FDE wants this CIE.
- */
- if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
- cie = cached_cie;
- goto out;
- }
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
- BUG_ON(!cie_tmp);
-
- if (cie_ptr == cie_tmp->cie_pointer) {
- cie = cie_tmp;
- cached_cie = cie_tmp;
- goto out;
- } else {
- if (cie_ptr < cie_tmp->cie_pointer)
- rb_node = &(*rb_node)->rb_left;
- else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
- return cie;
-}
-
-/**
- * dwarf_lookup_fde - locate the FDE that covers pc
- * @pc: the program counter
- */
-struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct dwarf_fde *fde = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
- BUG_ON(!fde_tmp);
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- if (pc < tmp_start) {
- rb_node = &(*rb_node)->rb_left;
- } else {
- if (pc < tmp_end) {
- fde = fde_tmp;
- goto out;
- } else
- rb_node = &(*rb_node)->rb_right;
- }
- }
-
-out:
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return fde;
-}
-
-/**
- * dwarf_cfa_execute_insns - execute instructions to calculate a CFA
- * @insn_start: address of the first instruction
- * @insn_end: address of the last instruction
- * @cie: the CIE for this function
- * @fde: the FDE for this function
- * @frame: the instructions calculate the CFA for this frame
- * @pc: the program counter of the address we're interested in
- *
- * Execute the Call Frame instruction sequence starting at
- * @insn_start and ending at @insn_end. The instructions describe
- * how to calculate the Canonical Frame Address of a stackframe.
- * Store the results in @frame.
- */
-static int dwarf_cfa_execute_insns(unsigned char *insn_start,
- unsigned char *insn_end,
- struct dwarf_cie *cie,
- struct dwarf_fde *fde,
- struct dwarf_frame *frame,
- unsigned long pc)
-{
- unsigned char insn;
- unsigned char *current_insn;
- unsigned int count, delta, reg, expr_len, offset;
- struct dwarf_reg *regp;
-
- current_insn = insn_start;
-
- while (current_insn < insn_end && frame->pc <= pc) {
- insn = __raw_readb(current_insn++);
-
- /*
- * Firstly, handle the opcodes that embed their operands
- * in the instructions.
- */
- switch (DW_CFA_opcode(insn)) {
- case DW_CFA_advance_loc:
- delta = DW_CFA_operand(insn);
- delta *= cie->code_alignment_factor;
- frame->pc += delta;
- continue;
- /* NOTREACHED */
- case DW_CFA_offset:
- reg = DW_CFA_operand(insn);
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->addr = offset;
- regp->flags |= DWARF_REG_OFFSET;
- continue;
- /* NOTREACHED */
- case DW_CFA_restore:
- reg = DW_CFA_operand(insn);
- continue;
- /* NOTREACHED */
- }
-
- /*
- * Secondly, handle the opcodes that don't embed their
- * operands in the instruction.
- */
- switch (insn) {
- case DW_CFA_nop:
- continue;
- case DW_CFA_advance_loc1:
- delta = *current_insn++;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc2:
- delta = get_unaligned((u16 *)current_insn);
- current_insn += 2;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_advance_loc4:
- delta = get_unaligned((u32 *)current_insn);
- current_insn += 4;
- frame->pc += delta * cie->code_alignment_factor;
- break;
- case DW_CFA_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- break;
- case DW_CFA_restore_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- break;
- case DW_CFA_undefined:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_UNDEFINED;
- break;
- case DW_CFA_def_cfa:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_offset);
- current_insn += count;
-
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_register:
- count = dwarf_read_uleb128(current_insn,
- &frame->cfa_register);
- current_insn += count;
- frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
- break;
- case DW_CFA_def_cfa_offset:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- frame->cfa_offset = offset;
- break;
- case DW_CFA_def_cfa_expression:
- count = dwarf_read_uleb128(current_insn, &expr_len);
- current_insn += count;
-
- frame->cfa_expr = current_insn;
- frame->cfa_expr_len = expr_len;
- current_insn += expr_len;
-
- frame->flags |= DWARF_FRAME_CFA_REG_EXP;
- break;
- case DW_CFA_offset_extended_sf:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- current_insn += count;
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_val_offset:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_leb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_VAL_OFFSET;
- regp->addr = offset;
- break;
- case DW_CFA_GNU_args_size:
- count = dwarf_read_uleb128(current_insn, &offset);
- current_insn += count;
- break;
- case DW_CFA_GNU_negative_offset_extended:
- count = dwarf_read_uleb128(current_insn, ®);
- current_insn += count;
- count = dwarf_read_uleb128(current_insn, &offset);
- offset *= cie->data_alignment_factor;
-
- regp = dwarf_frame_alloc_reg(frame, reg);
- regp->flags |= DWARF_REG_OFFSET;
- regp->addr = -offset;
- break;
- default:
- pr_debug("unhandled DWARF instruction 0x%x\n", insn);
- UNWINDER_BUG();
- break;
- }
- }
-
- return 0;
-}
-
-/**
- * dwarf_free_frame - free the memory allocated for @frame
- * @frame: the frame to free
- */
-void dwarf_free_frame(struct dwarf_frame *frame)
-{
- dwarf_frame_free_regs(frame);
- mempool_free(frame, dwarf_frame_pool);
-}
-
-extern void ret_from_irq(void);
-
-/**
- * dwarf_unwind_stack - unwind the stack
- *
- * @pc: address of the function to unwind
- * @prev: struct dwarf_frame of the previous stackframe on the callstack
- *
- * Return a struct dwarf_frame representing the most recent frame
- * on the callstack. Each of the lower (older) stack frames are
- * linked via the "prev" member.
- */
-struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
- struct dwarf_frame *prev)
-{
- struct dwarf_frame *frame;
- struct dwarf_cie *cie;
- struct dwarf_fde *fde;
- struct dwarf_reg *reg;
- unsigned long addr;
-
- /*
- * If we've been called in to before initialization has
- * completed, bail out immediately.
- */
- if (!dwarf_unwinder_ready)
- return NULL;
-
- /*
- * If we're starting at the top of the stack we need get the
- * contents of a physical register to get the CFA in order to
- * begin the virtual unwinding of the stack.
- *
- * NOTE: the return address is guaranteed to be setup by the
- * time this function makes its first function call.
- */
- if (!pc || !prev)
- pc = _THIS_IP_;
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- /*
- * If our stack has been patched by the function graph tracer
- * then we might see the address of return_to_handler() where we
- * expected to find the real return address.
- */
- if (pc == (unsigned long)&return_to_handler) {
- struct ftrace_ret_stack *ret_stack;
-
- ret_stack = ftrace_graph_get_ret_stack(current, 0);
- if (ret_stack)
- pc = ret_stack->ret;
- /*
- * We currently have no way of tracking how many
- * return_to_handler()'s we've seen. If there is more
- * than one patched return address on our stack,
- * complain loudly.
- */
- WARN_ON(ftrace_graph_get_ret_stack(current, 1));
- }
-#endif
-
- frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
- if (!frame) {
- printk(KERN_ERR "Unable to allocate a dwarf frame\n");
- UNWINDER_BUG();
- }
-
- INIT_LIST_HEAD(&frame->reg_list);
- frame->flags = 0;
- frame->prev = prev;
- frame->return_addr = 0;
-
- fde = dwarf_lookup_fde(pc);
- if (!fde) {
- /*
- * This is our normal exit path. There are two reasons
- * why we might exit here,
- *
- * a) pc has no asscociated DWARF frame info and so
- * we don't know how to unwind this frame. This is
- * usually the case when we're trying to unwind a
- * frame that was called from some assembly code
- * that has no DWARF info, e.g. syscalls.
- *
- * b) the DEBUG info for pc is bogus. There's
- * really no way to distinguish this case from the
- * case above, which sucks because we could print a
- * warning here.
- */
- goto bail;
- }
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
-
- frame->pc = fde->initial_location;
-
- /* CIE initial instructions */
- dwarf_cfa_execute_insns(cie->initial_instructions,
- cie->instructions_end, cie, fde,
- frame, pc);
-
- /* FDE instructions */
- dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
- fde, frame, pc);
-
- /* Calculate the CFA */
- switch (frame->flags) {
- case DWARF_FRAME_CFA_REG_OFFSET:
- if (prev) {
- reg = dwarf_frame_reg(prev, frame->cfa_register);
- UNWINDER_BUG_ON(!reg);
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = prev->cfa + reg->addr;
- frame->cfa = __raw_readl(addr);
-
- } else {
- /*
- * Again, we're starting from the top of the
- * stack. We need to physically read
- * the contents of a register in order to get
- * the Canonical Frame Address for this
- * function.
- */
- frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
- }
-
- frame->cfa += frame->cfa_offset;
- break;
- default:
- UNWINDER_BUG();
- }
-
- reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
-
- /*
- * If we haven't seen the return address register or the return
- * address column is undefined then we must assume that this is
- * the end of the callstack.
- */
- if (!reg || reg->flags == DWARF_UNDEFINED)
- goto bail;
-
- UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
-
- addr = frame->cfa + reg->addr;
- frame->return_addr = __raw_readl(addr);
-
- /*
- * Ah, the joys of unwinding through interrupts.
- *
- * Interrupts are tricky - the DWARF info needs to be _really_
- * accurate and unfortunately I'm seeing a lot of bogus DWARF
- * info. For example, I've seen interrupts occur in epilogues
- * just after the frame pointer (r14) had been restored. The
- * problem was that the DWARF info claimed that the CFA could be
- * reached by using the value of the frame pointer before it was
- * restored.
- *
- * So until the compiler can be trusted to produce reliable
- * DWARF info when it really matters, let's stop unwinding once
- * we've calculated the function that was interrupted.
- */
- if (prev && prev->pc == (unsigned long)ret_from_irq)
- frame->return_addr = 0;
-
- return frame;
-
-bail:
- dwarf_free_frame(frame);
- return NULL;
-}
-
-static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &cie_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
-
- cie = kzalloc(sizeof(*cie), GFP_KERNEL);
- if (!cie)
- return -ENOMEM;
-
- cie->length = len;
-
- /*
- * Record the offset into the .eh_frame section
- * for this CIE. It allows this CIE to be
- * quickly and easily looked up from the
- * corresponding FDE.
- */
- cie->cie_pointer = (unsigned long)entry;
-
- cie->version = *(char *)p++;
- UNWINDER_BUG_ON(cie->version != 1);
-
- cie->augmentation = p;
- p += strlen(cie->augmentation) + 1;
-
- count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
- p += count;
-
- count = dwarf_read_leb128(p, &cie->data_alignment_factor);
- p += count;
-
- /*
- * Which column in the rule table contains the
- * return address?
- */
- if (cie->version == 1) {
- cie->return_address_reg = __raw_readb(p);
- p++;
- } else {
- count = dwarf_read_uleb128(p, &cie->return_address_reg);
- p += count;
- }
-
- if (cie->augmentation[0] == 'z') {
- unsigned int length, count;
- cie->flags |= DWARF_CIE_Z_AUGMENTATION;
-
- count = dwarf_read_uleb128(p, &length);
- p += count;
-
- UNWINDER_BUG_ON((unsigned char *)p > end);
-
- cie->initial_instructions = p + length;
- cie->augmentation++;
- }
-
- while (*cie->augmentation) {
- /*
- * "L" indicates a byte showing how the
- * LSDA pointer is encoded. Skip it.
- */
- if (*cie->augmentation == 'L') {
- p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'R') {
- /*
- * "R" indicates a byte showing
- * how FDE addresses are
- * encoded.
- */
- cie->encoding = *(char *)p++;
- cie->augmentation++;
- } else if (*cie->augmentation == 'P') {
- /*
- * "R" indicates a personality
- * routine in the CIE
- * augmentation.
- */
- UNWINDER_BUG();
- } else if (*cie->augmentation == 'S') {
- UNWINDER_BUG();
- } else {
- /*
- * Unknown augmentation. Assume
- * 'z' augmentation.
- */
- p = cie->initial_instructions;
- UNWINDER_BUG_ON(!p);
- break;
- }
- }
-
- cie->initial_instructions = p;
- cie->instructions_end = end;
-
- /* Add to list */
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- while (*rb_node) {
- struct dwarf_cie *cie_tmp;
-
- cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
-
- parent = *rb_node;
-
- if (cie->cie_pointer < cie_tmp->cie_pointer)
- rb_node = &parent->rb_left;
- else if (cie->cie_pointer >= cie_tmp->cie_pointer)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&cie->node, parent, rb_node);
- rb_insert_color(&cie->node, &cie_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&cie->link, &mod->arch.cie_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- return 0;
-}
-
-static int dwarf_parse_fde(void *entry, u32 entry_type,
- void *start, unsigned long len,
- unsigned char *end, struct module *mod)
-{
- struct rb_node **rb_node = &fde_root.rb_node;
- struct rb_node *parent = *rb_node;
- struct dwarf_fde *fde;
- struct dwarf_cie *cie;
- unsigned long flags;
- int count;
- void *p = start;
-
- fde = kzalloc(sizeof(*fde), GFP_KERNEL);
- if (!fde)
- return -ENOMEM;
-
- fde->length = len;
-
- /*
- * In a .eh_frame section the CIE pointer is the
- * delta between the address within the FDE
- */
- fde->cie_pointer = (unsigned long)(p - entry_type - 4);
-
- cie = dwarf_lookup_cie(fde->cie_pointer);
- fde->cie = cie;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->initial_location,
- cie->encoding);
- else
- count = dwarf_read_addr(p, &fde->initial_location);
-
- p += count;
-
- if (cie->encoding)
- count = dwarf_read_encoded_value(p, &fde->address_range,
- cie->encoding & 0x0f);
- else
- count = dwarf_read_addr(p, &fde->address_range);
-
- p += count;
-
- if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
- unsigned int length;
- count = dwarf_read_uleb128(p, &length);
- p += count + length;
- }
-
- /* Call frame instructions. */
- fde->instructions = p;
- fde->end = end;
-
- /* Add to list. */
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- while (*rb_node) {
- struct dwarf_fde *fde_tmp;
- unsigned long tmp_start, tmp_end;
- unsigned long start, end;
-
- fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
-
- start = fde->initial_location;
- end = fde->initial_location + fde->address_range;
-
- tmp_start = fde_tmp->initial_location;
- tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
-
- parent = *rb_node;
-
- if (start < tmp_start)
- rb_node = &parent->rb_left;
- else if (start >= tmp_end)
- rb_node = &parent->rb_right;
- else
- WARN_ON(1);
- }
-
- rb_link_node(&fde->node, parent, rb_node);
- rb_insert_color(&fde->node, &fde_root);
-
-#ifdef CONFIG_MODULES
- if (mod != NULL)
- list_add_tail(&fde->link, &mod->arch.fde_list);
-#endif
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-
- return 0;
-}
-
-static void dwarf_unwinder_dump(struct task_struct *task,
- struct pt_regs *regs,
- unsigned long *sp,
- const struct stacktrace_ops *ops,
- void *data)
-{
- struct dwarf_frame *frame, *_frame;
- unsigned long return_addr;
-
- _frame = NULL;
- return_addr = 0;
-
- while (1) {
- frame = dwarf_unwind_stack(return_addr, _frame);
-
- if (_frame)
- dwarf_free_frame(_frame);
-
- _frame = frame;
-
- if (!frame || !frame->return_addr)
- break;
-
- return_addr = frame->return_addr;
- ops->address(data, return_addr, 1);
- }
-
- if (frame)
- dwarf_free_frame(frame);
-}
-
-static struct unwinder dwarf_unwinder = {
- .name = "dwarf-unwinder",
- .dump = dwarf_unwinder_dump,
- .rating = 150,
-};
-
-static void __init dwarf_unwinder_cleanup(void)
-{
- struct dwarf_fde *fde, *next_fde;
- struct dwarf_cie *cie, *next_cie;
-
- /*
- * Deallocate all the memory allocated for the DWARF unwinder.
- * Traverse all the FDE/CIE lists and remove and free all the
- * memory associated with those data structures.
- */
- rbtree_postorder_for_each_entry_safe(fde, next_fde, &fde_root, node)
- kfree(fde);
-
- rbtree_postorder_for_each_entry_safe(cie, next_cie, &cie_root, node)
- kfree(cie);
-
- mempool_destroy(dwarf_reg_pool);
- mempool_destroy(dwarf_frame_pool);
- kmem_cache_destroy(dwarf_reg_cachep);
- kmem_cache_destroy(dwarf_frame_cachep);
-}
-
-/**
- * dwarf_parse_section - parse DWARF section
- * @eh_frame_start: start address of the .eh_frame section
- * @eh_frame_end: end address of the .eh_frame section
- * @mod: the kernel module containing the .eh_frame section
- *
- * Parse the information in a .eh_frame section.
- */
-static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
- struct module *mod)
-{
- u32 entry_type;
- void *p, *entry;
- int count, err = 0;
- unsigned long len = 0;
- unsigned int c_entries, f_entries;
- unsigned char *end;
-
- c_entries = 0;
- f_entries = 0;
- entry = eh_frame_start;
-
- while ((char *)entry < eh_frame_end) {
- p = entry;
-
- count = dwarf_entry_len(p, &len);
- if (count == 0) {
- /*
- * We read a bogus length field value. There is
- * nothing we can do here apart from disabling
- * the DWARF unwinder. We can't even skip this
- * entry and move to the next one because 'len'
- * tells us where our next entry is.
- */
- err = -EINVAL;
- goto out;
- } else
- p += count;
-
- /* initial length does not include itself */
- end = p + len;
-
- entry_type = get_unaligned((u32 *)p);
- p += 4;
-
- if (entry_type == DW_EH_FRAME_CIE) {
- err = dwarf_parse_cie(entry, p, len, end, mod);
- if (err < 0)
- goto out;
- else
- c_entries++;
- } else {
- err = dwarf_parse_fde(entry, entry_type, p, len,
- end, mod);
- if (err < 0)
- goto out;
- else
- f_entries++;
- }
-
- entry = (char *)entry + len + 4;
- }
-
- printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
- c_entries, f_entries);
-
- return 0;
-
-out:
- return err;
-}
-
-#ifdef CONFIG_MODULES
-int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *me)
-{
- unsigned int i, err;
- unsigned long start, end;
- char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
- start = end = 0;
-
- for (i = 1; i < hdr->e_shnum; i++) {
- /* Alloc bit cleared means "ignore it." */
- if ((sechdrs[i].sh_flags & SHF_ALLOC)
- && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
- start = sechdrs[i].sh_addr;
- end = start + sechdrs[i].sh_size;
- break;
- }
- }
-
- /* Did we find the .eh_frame section? */
- if (i != hdr->e_shnum) {
- INIT_LIST_HEAD(&me->arch.cie_list);
- INIT_LIST_HEAD(&me->arch.fde_list);
- err = dwarf_parse_section((char *)start, (char *)end, me);
- if (err) {
- printk(KERN_WARNING "%s: failed to parse DWARF info\n",
- me->name);
- return err;
- }
- }
-
- return 0;
-}
-
-/**
- * module_dwarf_cleanup - remove FDE/CIEs associated with @mod
- * @mod: the module that is being unloaded
- *
- * Remove any FDEs and CIEs from the global lists that came from
- * @mod's .eh_frame section because @mod is being unloaded.
- */
-void module_dwarf_cleanup(struct module *mod)
-{
- struct dwarf_fde *fde, *ftmp;
- struct dwarf_cie *cie, *ctmp;
- unsigned long flags;
-
- spin_lock_irqsave(&dwarf_cie_lock, flags);
-
- list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
- list_del(&cie->link);
- rb_erase(&cie->node, &cie_root);
- kfree(cie);
- }
-
- spin_unlock_irqrestore(&dwarf_cie_lock, flags);
-
- spin_lock_irqsave(&dwarf_fde_lock, flags);
-
- list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
- list_del(&fde->link);
- rb_erase(&fde->node, &fde_root);
- kfree(fde);
- }
-
- spin_unlock_irqrestore(&dwarf_fde_lock, flags);
-}
-#endif /* CONFIG_MODULES */
-
-/**
- * dwarf_unwinder_init - initialise the dwarf unwinder
- *
- * Build the data structures describing the .dwarf_frame section to
- * make it easier to lookup CIE and FDE entries. Because the
- * .eh_frame section is packed as tightly as possible it is not
- * easy to lookup the FDE for a given PC, so we build a list of FDE
- * and CIE entries that make it easier.
- */
-static int __init dwarf_unwinder_init(void)
-{
- int err = -ENOMEM;
-
- dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
- sizeof(struct dwarf_frame), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
- sizeof(struct dwarf_reg), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
-
- dwarf_frame_pool = mempool_create_slab_pool(DWARF_FRAME_MIN_REQ,
- dwarf_frame_cachep);
- if (!dwarf_frame_pool)
- goto out;
-
- dwarf_reg_pool = mempool_create_slab_pool(DWARF_REG_MIN_REQ,
- dwarf_reg_cachep);
- if (!dwarf_reg_pool)
- goto out;
-
- err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
- if (err)
- goto out;
-
- err = unwinder_register(&dwarf_unwinder);
- if (err)
- goto out;
-
- dwarf_unwinder_ready = 1;
-
- return 0;
-
-out:
- printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
- dwarf_unwinder_cleanup();
- return err;
-}
-early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
deleted file mode 100644
index 91ab2607a1ff9f..00000000000000
--- a/arch/sh/kernel/entry-common.S
+++ /dev/null
@@ -1,400 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 - 2008 Paul Mundt
- */
-
-! NOTE:
-! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
-! to be jumped is too far, but it causes illegal slot exception.
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * NOTE: This code uses a convention that instructions in the delay slot
- * of a transfer-control instruction are indented by an extra space, thus:
- *
- * jmp @k0 ! control-transfer instruction
- * ldc k1, ssr ! delay slot
- *
- * Stack layout in 'ret_from_syscall':
- * ptrace needs to have all regs on the stack.
- * if the order here is changed, it needs to be
- * updated in ptrace.c and ptrace.h
- *
- * r0
- * ...
- * r15 = stack pointer
- * spc
- * pr
- * ssr
- * gbr
- * mach
- * macl
- * syscall #
- *
- */
-#include <asm/dwarf.h>
-
-#if defined(CONFIG_PREEMPTION)
-# define preempt_stop() cli ; TRACE_IRQS_OFF
-#else
-# define preempt_stop()
-# define resume_kernel __restore_all
-#endif
-
-
- .align 2
-ENTRY(exception_error)
- !
- TRACE_IRQS_ON
- sti
- mov.l 1f, r0
- jmp @r0
- nop
-
- .align 2
-1: .long do_exception_error
-
- .align 2
-ret_from_exception:
- CFI_STARTPROC simple
- CFI_DEF_CFA r14, 0
- CFI_REL_OFFSET 17, 64
- CFI_REL_OFFSET 15, 60
- CFI_REL_OFFSET 14, 56
- CFI_REL_OFFSET 13, 52
- CFI_REL_OFFSET 12, 48
- CFI_REL_OFFSET 11, 44
- CFI_REL_OFFSET 10, 40
- CFI_REL_OFFSET 9, 36
- CFI_REL_OFFSET 8, 32
- preempt_stop()
-ENTRY(ret_from_irq)
- !
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shll r0
- shll r0 ! kernel space?
- get_current_thread_info r8, r0
- bt resume_kernel ! Yes, it's from kernel, go back soon
-
-#ifdef CONFIG_PREEMPTION
- bra resume_userspace
- nop
-ENTRY(resume_kernel)
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
- tst r0, r0
- bf noresched
-need_resched:
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
- bt noresched
-
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
- shlr r0
- and #(0xf0>>1), r0 ! interrupts off (exception path)?
- cmp/eq #(0xf0>>1), r0
- bt noresched
- mov.l 1f, r0
- jsr @r0 ! call preempt_schedule_irq
- nop
- bra need_resched
- nop
-
-noresched:
- bra __restore_all
- nop
-
- .align 2
-1: .long preempt_schedule_irq
-#endif
-
-ENTRY(resume_userspace)
- ! r8: current_thread_info
- cli
- TRACE_IRQS_OFF
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt/s __restore_all
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-work_pending:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- ! t: result of "tst #_TIF_NEED_RESCHED, r0"
- bf/s work_resched
- tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
-work_notifysig:
- bt/s __restore_all
- mov r15, r4
- mov r12, r5 ! set arg1(save_r0)
- mov r0, r6
- sti
- mov.l 2f, r1
- mov.l 3f, r0
- jmp @r1
- lds r0, pr
-work_resched:
- mov.l 1f, r1
- jsr @r1 ! schedule
- nop
- cli
- TRACE_IRQS_OFF
- !
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_WORK_MASK & 0xff), r0
- bt __restore_all
- bra work_pending
- tst #_TIF_NEED_RESCHED, r0
-
- .align 2
-1: .long schedule
-2: .long do_notify_resume
-3: .long resume_userspace
-
- .align 2
-syscall_exit_work:
- ! r0: current_thread_info->flags
- ! r8: current_thread_info
- tst #(_TIF_WORK_SYSCALL_MASK & 0xff), r0
- bt/s work_pending
- tst #_TIF_NEED_RESCHED, r0
- TRACE_IRQS_ON
- sti
- mov r15, r4
- mov.l 8f, r0 ! do_syscall_trace_leave
- jsr @r0
- nop
- bra resume_userspace
- nop
-
-__restore_all:
- mov #OFF_SR, r0
- mov.l @(r0,r15), r0 ! get status register
-
- shlr2 r0
- and #0x3c, r0
- cmp/eq #0x3c, r0
- bt 1f
- TRACE_IRQS_ON
- bra 2f
- nop
-1:
- TRACE_IRQS_OFF
-2:
- mov.l 3f, r0
- jmp @r0
- nop
-
- .align 2
-3: .long restore_all
-
- .align 2
-syscall_badsys: ! Bad syscall number
- get_current_thread_info r8, r0
- mov #-ENOSYS, r0
- bra resume_userspace
- mov.l r0, @(OFF_R0,r15) ! Return value
-
-/*
- * The main debug trap handler.
- *
- * r8=TRA (not the trap number!)
- *
- * Note: This assumes that the trapa value is left in its original
- * form (without the shlr2 shift) so the calculation for the jump
- * call table offset remains a simple in place mask.
- */
-debug_trap:
- mov r8, r0
- and #(0xf << 2), r0
- mov.l 1f, r8
- add r0, r8
- mov.l @r8, r8
- jsr @r8
- nop
- bra ret_from_exception
- nop
- CFI_ENDPROC
-
- .align 2
-1: .long debug_trap_table
-
-/*
- * Syscall interface:
- *
- * Syscall #: R3
- * Arguments #0 to #3: R4--R7
- * Arguments #4 to #6: R0, R1, R2
- * TRA: See following table.
- *
- * (TRA>>2) Purpose
- * -------- -------
- * 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
- * 0x10-0x1f general SH-3/4 syscall ABI.
- * 0x1f unified SH-2/3/4 syscall ABI (preferred).
- * 0x20-0x2f original SH-2 syscall ABI.
- * 0x30-0x3f debug traps used by the kernel.
- * 0x40-0xff Not supported by all parts, so left unhandled.
- *
- * For making system calls, any trap number in the range for the
- * given cpu model may be used, but the unified trap number 0x1f is
- * preferred for compatibility with all models.
- *
- * The low bits of the trap number were once documented as matching
- * the number of arguments, but they were never actually used as such
- * by the kernel. SH-2 originally used its own separate trap range
- * because several hardware exceptions fell in the range used for the
- * SH-3/4 syscall ABI.
- *
- * This code also handles delegating other traps to the BIOS/gdb stub.
- *
- * Note: When we're first called, the TRA value must be shifted
- * right 2 bits in order to get the value that was used as the "trapa"
- * argument.
- */
-
- .align 2
- .globl ret_from_fork
-ret_from_fork:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- bra syscall_exit
- nop
-
- .align 2
- .globl ret_from_kernel_thread
-ret_from_kernel_thread:
- mov.l 1f, r8
- jsr @r8
- mov r0, r4
- mov.l @(OFF_R5,r15), r5 ! fn
- jsr @r5
- mov.l @(OFF_R4,r15), r4 ! arg
- bra syscall_exit
- nop
-
- .align 2
-1: .long schedule_tail
-
-/*
- * The poorly named main trapa decode and dispatch routine, for
- * system calls and debug traps through their respective jump tables.
- */
-ENTRY(system_call)
- setup_frame_reg
-#if !defined(CONFIG_CPU_SH2)
- mov.l 1f, r9
- mov.l @r9, r8 ! Read from TRA (Trap Address) Register
-#endif
-
- mov #OFF_TRA, r10
- add r15, r10
- mov.l r8, @r10 ! set TRA value to tra
-
- /*
- * Check the trap type
- */
- mov #((0x20 << 2) - 1), r9
- cmp/hi r9, r8
- bt/s debug_trap ! it's a debug trap..
- nop
-
- TRACE_IRQS_ON
- sti
-
- !
- get_current_thread_info r8, r10
- mov.l @(TI_FLAGS,r8), r8
- mov #(_TIF_WORK_SYSCALL_MASK & 0xff), r10
- mov #(_TIF_WORK_SYSCALL_MASK >> 8), r9
- tst r10, r8
- shll8 r9
- bf syscall_trace_entry
- tst r9, r8
- bf syscall_trace_entry
- !
- mov.l 6f, r8 ! Number of syscalls
- cmp/hs r8, r3
- bt syscall_badsys
- !
-syscall_call:
- shll2 r3 ! x4
- mov.l 3f, r8 ! Load the address of sys_call_table
- add r8, r3
- mov.l @r3, r8
- mov.l @(OFF_R2,r15), r2
- mov.l @(OFF_R1,r15), r1
- mov.l @(OFF_R0,r15), r0
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
- jsr @r8 ! jump to specific syscall handler
- nop
- add #12, r15
- mov.l @(OFF_R0,r15), r12 ! save r0
- mov.l r0, @(OFF_R0,r15) ! save the return value
- !
-syscall_exit:
- cli
- TRACE_IRQS_OFF
- !
- get_current_thread_info r8, r0
- mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
- tst #(_TIF_ALLWORK_MASK & 0xff), r0
- mov #(_TIF_ALLWORK_MASK >> 8), r1
- bf syscall_exit_work
- shlr8 r0
- tst r0, r1
- bf syscall_exit_work
- bra __restore_all
- nop
-
- .align 2
-syscall_trace_entry:
- ! Yes it is traced.
- mov r15, r4
- mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies
- jsr @r11 ! superior (will chomp R[0-7])
- nop
- cmp/eq #-1, r0
- bt syscall_exit
- ! Reload R0-R4 from kernel stack, where the
- ! parent may have modified them using
- ! ptrace(POKEUSR). (Note that R0-R2 are
- ! reloaded from the kernel stack by syscall_call
- ! below, so don't need to be reloaded here.)
- ! This allows the parent to rewrite system calls
- ! and args on the fly.
- mov.l @(OFF_R4,r15), r4 ! arg0
- mov.l @(OFF_R5,r15), r5
- mov.l @(OFF_R6,r15), r6
- mov.l @(OFF_R7,r15), r7 ! arg3
- mov.l @(OFF_R3,r15), r3 ! syscall_nr
- !
- mov.l 6f, r10 ! Number of syscalls
- cmp/hs r10, r3
- bf syscall_call
- mov #-ENOSYS, r0
- bra syscall_exit
- mov.l r0, @(OFF_R0,r15) ! Return value
-
- .align 2
-#if !defined(CONFIG_CPU_SH2)
-1: .long TRA
-#endif
-6: .long NR_syscalls
-3: .long sys_call_table
-7: .long do_syscall_trace_enter
-8: .long do_syscall_trace_leave
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
deleted file mode 100644
index 930001bb8c6a67..00000000000000
--- a/arch/sh/kernel/ftrace.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008 Matt Fleming <matt@console-pimps.org>
- * Copyright (C) 2008 Paul Mundt <lethal@linux-sh.org>
- *
- * Code for replacing ftrace calls with jumps.
- *
- * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- *
- * Thanks goes to Ingo Molnar, for suggesting the idea.
- * Mathieu Desnoyers, for suggesting postponing the modifications.
- * Arjan van de Ven, for keeping me straight, and explaining to me
- * the dangers of modifying code on the run.
- */
-#include <linux/uaccess.h>
-#include <linux/ftrace.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/ftrace.h>
-#include <asm/cacheflush.h>
-#include <asm/unistd.h>
-#include <trace/syscall.h>
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
-
-static unsigned char ftrace_nop[4];
-/*
- * If we're trying to nop out a call to a function, we instead
- * place a call to the address after the memory table.
- *
- * 8c011060 <a>:
- * 8c011060: 02 d1 mov.l 8c01106c <a+0xc>,r1
- * 8c011062: 22 4f sts.l pr,@-r15
- * 8c011064: 02 c7 mova 8c011070 <a+0x10>,r0
- * 8c011066: 2b 41 jmp @r1
- * 8c011068: 2a 40 lds r0,pr
- * 8c01106a: 09 00 nop
- * 8c01106c: 68 24 .word 0x2468 <--- ip
- * 8c01106e: 1d 8c .word 0x8c1d
- * 8c011070: 26 4f lds.l @r15+,pr <--- ip + MCOUNT_INSN_SIZE
- *
- * We write 0x8c011070 to 0x8c01106c so that on entry to a() we branch
- * past the _mcount call and continue executing code like normal.
- */
-static unsigned char *ftrace_nop_replace(unsigned long ip)
-{
- __raw_writel(ip + MCOUNT_INSN_SIZE, ftrace_nop);
- return ftrace_nop;
-}
-
-static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
-{
- /* Place the address in the memory table. */
- __raw_writel(addr, ftrace_replaced_code);
-
- /*
- * No locking needed, this must be called via kstop_machine
- * which in essence is like running on a uniprocessor machine.
- */
- return ftrace_replaced_code;
-}
-
-/*
- * Modifying code must take extra care. On an SMP machine, if
- * the code being modified is also being executed on another CPU
- * that CPU will have undefined results and possibly take a GPF.
- * We use kstop_machine to stop other CPUS from executing code.
- * But this does not stop NMIs from happening. We still need
- * to protect against that. We separate out the modification of
- * the code to take care of this.
- *
- * Two buffers are added: An IP buffer and a "code" buffer.
- *
- * 1) Put the instruction pointer into the IP buffer
- * and the new code into the "code" buffer.
- * 2) Wait for any running NMIs to finish and set a flag that says
- * we are modifying code, it is done in an atomic operation.
- * 3) Write the code
- * 4) clear the flag.
- * 5) Wait for any running NMIs to finish.
- *
- * If an NMI is executed, the first thing it does is to call
- * "ftrace_nmi_enter". This will check if the flag is set to write
- * and if it is, it will write what is in the IP and "code" buffers.
- *
- * The trick is, it does not matter if everyone is writing the same
- * content to the code location. Also, if a CPU is executing code
- * it is OK to write to that code location if the contents being written
- * are the same as what exists.
- */
-#define MOD_CODE_WRITE_FLAG (1 << 31) /* set when NMI should do the write */
-static atomic_t nmi_running = ATOMIC_INIT(0);
-static int mod_code_status; /* holds return value of text write */
-static void *mod_code_ip; /* holds the IP to write to */
-static void *mod_code_newcode; /* holds the text to write to the IP */
-
-static void clear_mod_flag(void)
-{
- int old = atomic_read(&nmi_running);
-
- for (;;) {
- int new = old & ~MOD_CODE_WRITE_FLAG;
-
- if (old == new)
- break;
-
- old = atomic_cmpxchg(&nmi_running, old, new);
- }
-}
-
-static void ftrace_mod_code(void)
-{
- /*
- * Yes, more than one CPU process can be writing to mod_code_status.
- * (and the code itself)
- * But if one were to fail, then they all should, and if one were
- * to succeed, then they all should.
- */
- mod_code_status = copy_to_kernel_nofault(mod_code_ip, mod_code_newcode,
- MCOUNT_INSN_SIZE);
-
- /* if we fail, then kill any new writers */
- if (mod_code_status)
- clear_mod_flag();
-}
-
-void arch_ftrace_nmi_enter(void)
-{
- if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
- smp_rmb();
- ftrace_mod_code();
- }
- /* Must have previous changes seen before executions */
- smp_mb();
-}
-
-void arch_ftrace_nmi_exit(void)
-{
- /* Finish all executions before clearing nmi_running */
- smp_mb();
- atomic_dec(&nmi_running);
-}
-
-static void wait_for_nmi_and_set_mod_flag(void)
-{
- if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
- return;
-
- do {
- cpu_relax();
- } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
-}
-
-static void wait_for_nmi(void)
-{
- if (!atomic_read(&nmi_running))
- return;
-
- do {
- cpu_relax();
- } while (atomic_read(&nmi_running));
-}
-
-static int
-do_ftrace_mod_code(unsigned long ip, void *new_code)
-{
- mod_code_ip = (void *)ip;
- mod_code_newcode = new_code;
-
- /* The buffers need to be visible before we let NMIs write them */
- smp_mb();
-
- wait_for_nmi_and_set_mod_flag();
-
- /* Make sure all running NMIs have finished before we write the code */
- smp_mb();
-
- ftrace_mod_code();
-
- /* Make sure the write happens before clearing the bit */
- smp_mb();
-
- clear_mod_flag();
- wait_for_nmi();
-
- return mod_code_status;
-}
-
-static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
- unsigned char *new_code)
-{
- unsigned char replaced[MCOUNT_INSN_SIZE];
-
- /*
- * Note:
- * We are paranoid about modifying text, as if a bug was to happen, it
- * could cause us to read or write to someplace that could cause harm.
- * Carefully read and modify the code with probe_kernel_*(), and make
- * sure what we read is what we expected it to be before modifying it.
- */
-
- /* read the text we want to modify */
- if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- /* Make sure it is what we expect it to be */
- if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
- return -EINVAL;
-
- /* replace the text with the new text */
- if (do_ftrace_mod_code(ip, new_code))
- return -EPERM;
-
- flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
-
- return 0;
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
- unsigned long ip = (unsigned long)(&ftrace_call) + MCOUNT_INSN_OFFSET;
- unsigned char old[MCOUNT_INSN_SIZE], *new;
-
- memcpy(old, (unsigned char *)ip, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
-
- return ftrace_modify_code(ip, old, new);
-}
-
-int ftrace_make_nop(struct module *mod,
- struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_call_replace(ip, addr);
- new = ftrace_nop_replace(ip);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned char *new, *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_nop_replace(ip);
- new = ftrace_call_replace(ip, addr);
-
- return ftrace_modify_code(rec->ip, old, new);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void ftrace_graph_call(void);
-
-static int ftrace_mod(unsigned long ip, unsigned long old_addr,
- unsigned long new_addr)
-{
- unsigned char code[MCOUNT_INSN_SIZE];
-
- if (copy_from_kernel_nofault(code, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- if (old_addr != __raw_readl((unsigned long *)code))
- return -EINVAL;
-
- __raw_writel(new_addr, ip);
- return 0;
-}
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&skip_trace);
- new_addr = (unsigned long)(&ftrace_graph_caller);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
- unsigned long ip, old_addr, new_addr;
-
- ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
- old_addr = (unsigned long)(&ftrace_graph_caller);
- new_addr = (unsigned long)(&skip_trace);
-
- return ftrace_mod(ip, old_addr, new_addr);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-/*
- * Hook the return address and push it in the stack of return addrs
- * in the current thread info.
- *
- * This is the main routine for the function graph tracer. The function
- * graph tracer essentially works like this:
- *
- * parent is the stack address containing self_addr's return address.
- * We pull the real return address out of parent and store it in
- * current's ret_stack. Then, we replace the return address on the stack
- * with the address of return_to_handler. self_addr is the function that
- * called mcount.
- *
- * When self_addr returns, it will jump to return_to_handler which calls
- * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
- * return address off of current's ret_stack and jump to it.
- */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
-{
- unsigned long old;
- int faulted;
- unsigned long return_hooker = (unsigned long)&return_to_handler;
-
- if (unlikely(ftrace_graph_is_dead()))
- return;
-
- if (unlikely(atomic_read(¤t->tracing_graph_pause)))
- return;
-
- /*
- * Protect against fault, even if it shouldn't
- * happen. This tool is too much intrusive to
- * ignore such a protection.
- */
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%2, %0 \n\t"
- "2: \n\t"
- "mov.l %3, @%2 \n\t"
- "mov #0, %1 \n\t"
- "3: \n\t"
- ".section .fixup, \"ax\" \n\t"
- "4: \n\t"
- "mov.l 5f, %0 \n\t"
- "jmp @%0 \n\t"
- " mov #1, %1 \n\t"
- ".balign 4 \n\t"
- "5: .long 3b \n\t"
- ".previous \n\t"
- ".section __ex_table,\"a\" \n\t"
- ".long 1b, 4b \n\t"
- ".long 2b, 4b \n\t"
- ".previous \n\t"
- : "=&r" (old), "=r" (faulted)
- : "r" (parent), "r" (return_hooker)
- );
-
- if (unlikely(faulted)) {
- ftrace_graph_stop();
- WARN_ON(1);
- return;
- }
-
- if (function_graph_enter(old, self_addr, 0, NULL))
- __raw_writel(old, parent);
-}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
deleted file mode 100644
index 4adbd4ade31946..00000000000000
--- a/arch/sh/kernel/head_32.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- * $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $
- *
- * arch/sh/kernel/head.S
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2010 Matt Fleming
- *
- * Head.S contains the SH exception handlers and startup code.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/mmu.h>
-#include <cpu/mmu_context.h>
-
-#ifdef CONFIG_CPU_SH4A
-#define SYNCO() synco
-
-#define PREFI(label, reg) \
- mov.l label, reg; \
- prefi @reg
-#else
-#define SYNCO()
-#define PREFI(label, reg)
-#endif
-
- .section .empty_zero_page, "aw"
-ENTRY(empty_zero_page)
- .long 1 /* MOUNT_ROOT_RDONLY */
- .long 0 /* RAMDISK_FLAGS */
- .long 0x0200 /* ORIG_ROOT_DEV */
- .long 1 /* LOADER_TYPE */
- .long 0x00000000 /* INITRD_START */
- .long 0x00000000 /* INITRD_SIZE */
-#ifdef CONFIG_32BIT
- .long 0x53453f00 + 32 /* "SE?" = 32 bit */
-#else
- .long 0x53453f00 + 29 /* "SE?" = 29 bit */
-#endif
-1:
- .skip PAGE_SIZE - empty_zero_page - 1b
-
- __HEAD
-
-/*
- * Condition at the entry of _stext:
- *
- * BSC has already been initialized.
- * INTC may or may not be initialized.
- * VBR may or may not be initialized.
- * MMU may or may not be initialized.
- * Cache may or may not be initialized.
- * Hardware (including on-chip modules) may or may not be initialized.
- *
- */
-ENTRY(_stext)
- ! Initialize Status Register
- mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF
- ldc r0, sr
- ! Initialize global interrupt mask
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov #0, r0
- ldc r0, r6_bank
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov r4, r12 ! Store device tree blob pointer in r12
-#endif
-
- /*
- * Prefetch if possible to reduce cache miss penalty.
- *
- * We do this early on for SH-4A as a micro-optimization,
- * as later on we will have speculative execution enabled
- * and this will become less of an issue.
- */
- PREFI(5f, r0)
- PREFI(6f, r0)
-
- !
- mov.l 2f, r0
- mov r0, r15 ! Set initial r15 (stack pointer)
-#ifdef CONFIG_CPU_HAS_SR_RB
- mov.l 7f, r0
- ldc r0, r7_bank ! ... and initial thread_info
-#endif
-
-#ifdef CONFIG_PMB
-/*
- * Reconfigure the initial PMB mappings setup by the hardware.
- *
- * When we boot in 32-bit MMU mode there are 2 PMB entries already
- * setup for us.
- *
- * Entry VPN PPN V SZ C UB WT
- * ---------------------------------------------------------------
- * 0 0x80000000 0x00000000 1 512MB 1 0 1
- * 1 0xA0000000 0x00000000 1 512MB 0 0 0
- *
- * But we reprogram them here because we want complete control over
- * our address space and the initial mappings may not map PAGE_OFFSET
- * to __MEMORY_START (or even map all of our RAM).
- *
- * Once we've setup cached and uncached mappings we clear the rest of the
- * PMB entries. This clearing also deals with the fact that PMB entries
- * can persist across reboots. The PMB could have been left in any state
- * when the reboot occurred, so to be safe we clear all entries and start
- * with with a clean slate.
- *
- * The uncached mapping is constructed using the smallest possible
- * mapping with a single unbufferable page. Only the kernel text needs to
- * be covered via the uncached mapping so that certain functions can be
- * run uncached.
- *
- * Drivers and the like that have previously abused the 1:1 identity
- * mapping are unsupported in 32-bit mode and must specify their caching
- * preference when page tables are constructed.
- *
- * This frees up the P2 space for more nefarious purposes.
- *
- * Register utilization is as follows:
- *
- * r0 = PMB_DATA data field
- * r1 = PMB_DATA address field
- * r2 = PMB_ADDR data field
- * r3 = PMB_ADDR address field
- * r4 = PMB_E_SHIFT
- * r5 = remaining amount of RAM to map
- * r6 = PMB mapping size we're trying to use
- * r7 = cached_to_uncached
- * r8 = scratch register
- * r9 = scratch register
- * r10 = number of PMB entries we've setup
- * r11 = scratch register
- */
-
- mov.l .LMMUCR, r1 /* Flush the TLB */
- mov.l @r1, r0
- or #MMUCR_TI, r0
- mov.l r0, @r1
-
- mov.l .LMEMORY_SIZE, r5
-
- mov #PMB_E_SHIFT, r0
- mov #0x1, r4
- shld r0, r4
-
- mov.l .LFIRST_DATA_ENTRY, r0
- mov.l .LPMB_DATA, r1
- mov.l .LFIRST_ADDR_ENTRY, r2
- mov.l .LPMB_ADDR, r3
-
- /*
- * First we need to walk the PMB and figure out if there are any
- * existing mappings that match the initial mappings VPN/PPN.
- * If these have already been established by the bootloader, we
- * don't bother setting up new entries here, and let the late PMB
- * initialization take care of things instead.
- *
- * Note that we may need to coalesce and merge entries in order
- * to reclaim more available PMB slots, which is much more than
- * we want to do at this early stage.
- */
- mov #0, r10
- mov #NR_PMB_ENTRIES, r9
-
- mov r1, r7 /* temporary PMB_DATA iter */
-
-.Lvalidate_existing_mappings:
-
- mov.l .LPMB_DATA_MASK, r11
- mov.l @r7, r8
- and r11, r8
- cmp/eq r0, r8 /* Check for valid __MEMORY_START mappings */
- bt .Lpmb_done
-
- add #1, r10 /* Increment the loop counter */
- cmp/eq r9, r10
- bf/s .Lvalidate_existing_mappings
- add r4, r7 /* Increment to the next PMB_DATA entry */
-
- /*
- * If we've fallen through, continue with setting up the initial
- * mappings.
- */
-
- mov r5, r7 /* cached_to_uncached */
- mov #0, r10
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Uncached mapping
- */
- mov #(PMB_SZ_16M >> 2), r9
- shll2 r9
-
- mov #(PMB_UB >> 8), r8
- shll8 r8
-
- or r0, r8
- or r9, r8
- mov.l r8, @r1
- mov r2, r8
- add r7, r8
- mov.l r8, @r3
-
- add r4, r1
- add r4, r3
- add #1, r10
-#endif
-
-/*
- * Iterate over all of the available sizes from largest to
- * smallest for constructing the cached mapping.
- */
-#define __PMB_ITER_BY_SIZE(size) \
-.L##size: \
- mov #(size >> 4), r6; \
- shll16 r6; \
- shll8 r6; \
- \
- cmp/hi r5, r6; \
- bt 9999f; \
- \
- mov #(PMB_SZ_##size##M >> 2), r9; \
- shll2 r9; \
- \
- /* \
- * Cached mapping \
- */ \
- mov #PMB_C, r8; \
- or r0, r8; \
- or r9, r8; \
- mov.l r8, @r1; \
- mov.l r2, @r3; \
- \
- /* Increment to the next PMB_DATA entry */ \
- add r4, r1; \
- /* Increment to the next PMB_ADDR entry */ \
- add r4, r3; \
- /* Increment number of PMB entries */ \
- add #1, r10; \
- \
- sub r6, r5; \
- add r6, r0; \
- add r6, r2; \
- \
- bra .L##size; \
-9999:
-
- __PMB_ITER_BY_SIZE(512)
- __PMB_ITER_BY_SIZE(128)
- __PMB_ITER_BY_SIZE(64)
- __PMB_ITER_BY_SIZE(16)
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /*
- * Now that we can access it, update cached_to_uncached and
- * uncached_size.
- */
- mov.l .Lcached_to_uncached, r0
- mov.l r7, @r0
-
- mov.l .Luncached_size, r0
- mov #1, r7
- shll16 r7
- shll8 r7
- mov.l r7, @r0
-#endif
-
- /*
- * Clear the remaining PMB entries.
- *
- * r3 = entry to begin clearing from
- * r10 = number of entries we've setup so far
- */
- mov #0, r1
- mov #NR_PMB_ENTRIES, r0
-
-.Lagain:
- mov.l r1, @r3 /* Clear PMB_ADDR entry */
- add #1, r10 /* Increment the loop counter */
- cmp/eq r0, r10
- bf/s .Lagain
- add r4, r3 /* Increment to the next PMB_ADDR entry */
-
- mov.l 6f, r0
- icbi @r0
-
-.Lpmb_done:
-#endif /* CONFIG_PMB */
-
-#ifndef CONFIG_SH_NO_BSS_INIT
- /*
- * Don't clear BSS if running on slow platforms such as an RTL simulation,
- * remote memory via SHdebug link, etc. For these the memory can be guaranteed
- * to be all zero on boot anyway.
- */
- ! Clear BSS area
-#ifdef CONFIG_SMP
- mov.l 3f, r0
- cmp/eq #0, r0 ! skip clear if set to zero
- bt 10f
-#endif
-
- mov.l 3f, r1
- add #4, r1
- mov.l 4f, r2
- mov #0, r0
-9: cmp/hs r2, r1
- bf/s 9b ! while (r1 < r2)
- mov.l r0,@-r2
-
-10:
-#endif
-
-#ifdef CONFIG_OF_FLATTREE
- mov.l 8f, r0 ! Make flat device tree available early.
- jsr @r0
- mov r12, r4
-#endif
-
- ! Additional CPU initialization
- mov.l 6f, r0
- jsr @r0
- nop
-
- SYNCO() ! Wait for pending instructions..
-
- ! Start kernel
- mov.l 5f, r0
- jmp @r0
- nop
-
- .balign 4
-#if defined(CONFIG_CPU_SH2)
-1: .long 0x000000F0 ! IMASK=0xF
-#else
-1: .long 0x500080F0 ! MD=1, RB=0, BL=1, FD=1, IMASK=0xF
-#endif
-ENTRY(stack_start)
-2: .long init_thread_union+THREAD_SIZE
-3: .long __bss_start
-4: .long _end
-5: .long start_kernel
-6: .long cpu_init
-7: .long init_thread_union
-#if defined(CONFIG_OF_FLATTREE)
-8: .long sh_fdt_init
-#endif
-
-#ifdef CONFIG_PMB
-.LPMB_ADDR: .long PMB_ADDR
-.LPMB_DATA: .long PMB_DATA
-.LPMB_DATA_MASK: .long PMB_PFN_MASK | PMB_V
-.LFIRST_ADDR_ENTRY: .long PAGE_OFFSET | PMB_V
-.LFIRST_DATA_ENTRY: .long __MEMORY_START | PMB_V
-.LMMUCR: .long MMUCR
-.LMEMORY_SIZE: .long __MEMORY_SIZE
-#ifdef CONFIG_UNCACHED_MAPPING
-.Lcached_to_uncached: .long cached_to_uncached
-.Luncached_size: .long uncached_size
-#endif
-#endif
diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
deleted file mode 100644
index f10d64311127ba..00000000000000
--- a/arch/sh/kernel/hw_breakpoint.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/hw_breakpoint.c
- *
- * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
- *
- * Copyright (C) 2009 - 2010 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/perf_event.h>
-#include <linux/sched/signal.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/percpu.h>
-#include <linux/kallsyms.h>
-#include <linux/notifier.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <asm/hw_breakpoint.h>
-#include <asm/mmu_context.h>
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-
-/*
- * Stores the breakpoints currently in use on each breakpoint address
- * register for each cpus
- */
-static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
-
-/*
- * A dummy placeholder for early accesses until the CPUs get a chance to
- * register their UBCs later in the boot process.
- */
-static struct sh_ubc ubc_dummy = { .num_events = 0 };
-
-static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
-
-/*
- * Install a perf counter breakpoint.
- *
- * We seek a free UBC channel and use it for this breakpoint.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-int arch_install_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (!*slot) {
- *slot = bp;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return -EBUSY;
-
- clk_enable(sh_ubc->clk);
- sh_ubc->enable(info, i);
-
- return 0;
-}
-
-/*
- * Uninstall the breakpoint contained in the given counter.
- *
- * First we search the debug address register it uses and then we disable
- * it.
- *
- * Atomic: we hold the counter->ctx->lock and we only handle variables
- * and registers local to this cpu.
- */
-void arch_uninstall_hw_breakpoint(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- int i;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
-
- if (*slot == bp) {
- *slot = NULL;
- break;
- }
- }
-
- if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
- return;
-
- sh_ubc->disable(info, i);
- clk_disable(sh_ubc->clk);
-}
-
-static int get_hbp_len(u16 hbp_len)
-{
- unsigned int len_in_bytes = 0;
-
- switch (hbp_len) {
- case SH_BREAKPOINT_LEN_1:
- len_in_bytes = 1;
- break;
- case SH_BREAKPOINT_LEN_2:
- len_in_bytes = 2;
- break;
- case SH_BREAKPOINT_LEN_4:
- len_in_bytes = 4;
- break;
- case SH_BREAKPOINT_LEN_8:
- len_in_bytes = 8;
- break;
- }
- return len_in_bytes;
-}
-
-/*
- * Check for virtual address in kernel space.
- */
-int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
-{
- unsigned int len;
- unsigned long va;
-
- va = hw->address;
- len = get_hbp_len(hw->len);
-
- return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
-}
-
-int arch_bp_generic_fields(int sh_len, int sh_type,
- int *gen_len, int *gen_type)
-{
- /* Len */
- switch (sh_len) {
- case SH_BREAKPOINT_LEN_1:
- *gen_len = HW_BREAKPOINT_LEN_1;
- break;
- case SH_BREAKPOINT_LEN_2:
- *gen_len = HW_BREAKPOINT_LEN_2;
- break;
- case SH_BREAKPOINT_LEN_4:
- *gen_len = HW_BREAKPOINT_LEN_4;
- break;
- case SH_BREAKPOINT_LEN_8:
- *gen_len = HW_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (sh_type) {
- case SH_BREAKPOINT_READ:
- *gen_type = HW_BREAKPOINT_R;
- break;
- case SH_BREAKPOINT_WRITE:
- *gen_type = HW_BREAKPOINT_W;
- break;
- case SH_BREAKPOINT_RW:
- *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int arch_build_bp_info(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- hw->address = attr->bp_addr;
-
- /* Len */
- switch (attr->bp_len) {
- case HW_BREAKPOINT_LEN_1:
- hw->len = SH_BREAKPOINT_LEN_1;
- break;
- case HW_BREAKPOINT_LEN_2:
- hw->len = SH_BREAKPOINT_LEN_2;
- break;
- case HW_BREAKPOINT_LEN_4:
- hw->len = SH_BREAKPOINT_LEN_4;
- break;
- case HW_BREAKPOINT_LEN_8:
- hw->len = SH_BREAKPOINT_LEN_8;
- break;
- default:
- return -EINVAL;
- }
-
- /* Type */
- switch (attr->bp_type) {
- case HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_READ;
- break;
- case HW_BREAKPOINT_W:
- hw->type = SH_BREAKPOINT_WRITE;
- break;
- case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
- hw->type = SH_BREAKPOINT_RW;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Validate the arch-specific HW Breakpoint register settings
- */
-int hw_breakpoint_arch_parse(struct perf_event *bp,
- const struct perf_event_attr *attr,
- struct arch_hw_breakpoint *hw)
-{
- unsigned int align;
- int ret;
-
- ret = arch_build_bp_info(bp, attr, hw);
- if (ret)
- return ret;
-
- ret = -EINVAL;
-
- switch (hw->len) {
- case SH_BREAKPOINT_LEN_1:
- align = 0;
- break;
- case SH_BREAKPOINT_LEN_2:
- align = 1;
- break;
- case SH_BREAKPOINT_LEN_4:
- align = 3;
- break;
- case SH_BREAKPOINT_LEN_8:
- align = 7;
- break;
- default:
- return ret;
- }
-
- /*
- * Check that the low-order bits of the address are appropriate
- * for the alignment implied by len.
- */
- if (hw->address & align)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Release the user breakpoints used by ptrace
- */
-void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
-{
- int i;
- struct thread_struct *t = &tsk->thread;
-
- for (i = 0; i < sh_ubc->num_events; i++) {
- unregister_hw_breakpoint(t->ptrace_bps[i]);
- t->ptrace_bps[i] = NULL;
- }
-}
-
-static int __kprobes hw_breakpoint_handler(struct die_args *args)
-{
- int cpu, i, rc = NOTIFY_STOP;
- struct perf_event *bp;
- unsigned int cmf, resume_mask;
-
- /*
- * Do an early return if none of the channels triggered.
- */
- cmf = sh_ubc->triggered_mask();
- if (unlikely(!cmf))
- return NOTIFY_DONE;
-
- /*
- * By default, resume all of the active channels.
- */
- resume_mask = sh_ubc->active_mask();
-
- /*
- * Disable breakpoints during exception handling.
- */
- sh_ubc->disable_all();
-
- cpu = get_cpu();
- for (i = 0; i < sh_ubc->num_events; i++) {
- unsigned long event_mask = (1 << i);
-
- if (likely(!(cmf & event_mask)))
- continue;
-
- /*
- * The counter may be concurrently released but that can only
- * occur from a call_rcu() path. We can then safely fetch
- * the breakpoint, use its callback, touch its counter
- * while we are in an rcu_read_lock() path.
- */
- rcu_read_lock();
-
- bp = per_cpu(bp_per_reg[i], cpu);
- if (bp)
- rc = NOTIFY_DONE;
-
- /*
- * Reset the condition match flag to denote completion of
- * exception handling.
- */
- sh_ubc->clear_triggered_mask(event_mask);
-
- /*
- * bp can be NULL due to concurrent perf counter
- * removing.
- */
- if (!bp) {
- rcu_read_unlock();
- break;
- }
-
- /*
- * Don't restore the channel if the breakpoint is from
- * ptrace, as it always operates in one-shot mode.
- */
- if (bp->overflow_handler == ptrace_triggered)
- resume_mask &= ~(1 << i);
-
- perf_bp_event(bp, args->regs);
-
- /* Deliver the signal to userspace */
- if (!arch_check_bp_in_kernelspace(&bp->hw.info)) {
- force_sig_fault(SIGTRAP, TRAP_HWBKPT,
- (void __user *)NULL);
- }
-
- rcu_read_unlock();
- }
-
- if (cmf == 0)
- rc = NOTIFY_DONE;
-
- sh_ubc->enable_all(resume_mask);
-
- put_cpu();
-
- return rc;
-}
-
-BUILD_TRAP_HANDLER(breakpoint)
-{
- unsigned long ex = lookup_exception_vector();
- TRAP_HANDLER_DECL;
-
- notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
-}
-
-/*
- * Handle debug exception notifications.
- */
-int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (val != DIE_BREAKPOINT)
- return NOTIFY_DONE;
-
- /*
- * If the breakpoint hasn't been triggered by the UBC, it's
- * probably from a debugger, so don't do anything more here.
- *
- * This also permits the UBC interface clock to remain off for
- * non-UBC breakpoints, as we don't need to check the triggered
- * or active channel masks.
- */
- if (args->trapnr != sh_ubc->trap_nr)
- return NOTIFY_DONE;
-
- return hw_breakpoint_handler(data);
-}
-
-void hw_breakpoint_pmu_read(struct perf_event *bp)
-{
- /* TODO */
-}
-
-int register_sh_ubc(struct sh_ubc *ubc)
-{
- /* Bail if it's already assigned */
- if (sh_ubc != &ubc_dummy)
- return -EBUSY;
- sh_ubc = ubc;
-
- pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
-
- WARN_ON(ubc->num_events > HBP_NUM);
-
- return 0;
-}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
deleted file mode 100644
index f59814983bd59f..00000000000000
--- a/arch/sh/kernel/idle.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * The idle loop for all SuperH platforms.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/preempt.h>
-#include <linux/thread_info.h>
-#include <linux/irqflags.h>
-#include <linux/smp.h>
-#include <linux/atomic.h>
-#include <asm/smp.h>
-#include <asm/bl_bit.h>
-
-static void (*sh_idle)(void);
-
-void default_idle(void)
-{
- set_bl_bit();
- raw_local_irq_enable();
- /* Isn't this racy ? */
- cpu_sleep();
- clear_bl_bit();
-}
-
-void arch_cpu_idle_dead(void)
-{
- play_dead();
-}
-
-void arch_cpu_idle(void)
-{
- sh_idle();
-}
-
-void __init select_idle_routine(void)
-{
- /*
- * If a platform has set its own idle routine, leave it alone.
- */
- if (!sh_idle)
- sh_idle = default_idle;
-}
-
-void stop_this_cpu(void *unused)
-{
- local_irq_disable();
- set_cpu_online(smp_processor_id(), false);
-
- for (;;)
- cpu_sleep();
-}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
deleted file mode 100644
index da22f3b32d305e..00000000000000
--- a/arch/sh/kernel/io.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/io.c - Machine independent I/O functions.
- *
- * Copyright (C) 2000 - 2009 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-/*
- * Copy data from IO memory space to "real" memory space.
- */
-void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
-{
- /*
- * Would it be worthwhile doing byte and long transfers first
- * to try and get aligned?
- */
-#ifdef CONFIG_CPU_SH4
- if ((count >= 0x20) &&
- (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l @%7+, %2 \n\t"
- "movca.l r0, @%0 \n\t"
- "mov.l @%7+, %3 \n\t"
- "mov.l @%7+, %4 \n\t"
- "mov.l @%7+, %5 \n\t"
- "mov.l @%7+, %6 \n\t"
- "mov.l @%7+, r7 \n\t"
- "mov.l @%7+, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > count \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (to), "=&r" (count),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
- : "7"(from), "0" (to), "1" (count)
- : "r0", "r7", "t", "memory");
- }
-#endif
-
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for (; count > 3; count -= 4) {
- *(u32 *)to = *(volatile u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(u8 *)to = *(volatile u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_fromio);
-
-/*
- * Copy data from "real" memory space to IO memory space.
- */
-void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
-{
- if ((((u32)to | (u32)from) & 0x3) == 0) {
- for ( ; count > 3; count -= 4) {
- *(volatile u32 *)to = *(u32 *)from;
- to += 4;
- from += 4;
- }
- }
-
- for (; count > 0; count--) {
- *(volatile u8 *)to = *(u8 *)from;
- to++;
- from++;
- }
-
- mb();
-}
-EXPORT_SYMBOL(memcpy_toio);
-
-/*
- * "memset" on IO memory space.
- * This needs to be optimized.
- */
-void memset_io(volatile void __iomem *dst, int c, unsigned long count)
-{
- while (count) {
- count--;
- writeb(c, dst);
- dst++;
- }
-}
-EXPORT_SYMBOL(memset_io);
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
deleted file mode 100644
index e803b14ef12eac..00000000000000
--- a/arch/sh/kernel/io_trapped.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Trapped io support
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Intercept io operations by trapping.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bitops.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/io_trapped.h>
-
-#define TRAPPED_PAGES_MAX 16
-
-#ifdef CONFIG_HAS_IOPORT_MAP
-LIST_HEAD(trapped_io);
-EXPORT_SYMBOL_GPL(trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
-LIST_HEAD(trapped_mem);
-EXPORT_SYMBOL_GPL(trapped_mem);
-#endif
-static DEFINE_SPINLOCK(trapped_lock);
-
-static int trapped_io_disable __read_mostly;
-
-static int __init trapped_io_setup(char *__unused)
-{
- trapped_io_disable = 1;
- return 1;
-}
-__setup("noiotrap", trapped_io_setup);
-
-int register_trapped_io(struct trapped_io *tiop)
-{
- struct resource *res;
- unsigned long len = 0, flags = 0;
- struct page *pages[TRAPPED_PAGES_MAX];
- int k, n;
-
- if (unlikely(trapped_io_disable))
- return 0;
-
- /* structure must be page aligned */
- if ((unsigned long)tiop & (PAGE_SIZE - 1))
- goto bad;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len += roundup(resource_size(res), PAGE_SIZE);
- flags |= res->flags;
- }
-
- /* support IORESOURCE_IO _or_ MEM, not both */
- if (hweight_long(flags) != 1)
- goto bad;
-
- n = len >> PAGE_SHIFT;
-
- if (n >= TRAPPED_PAGES_MAX)
- goto bad;
-
- for (k = 0; k < n; k++)
- pages[k] = virt_to_page(tiop);
-
- tiop->virt_base = vmap(pages, n, VM_MAP, PAGE_NONE);
- if (!tiop->virt_base)
- goto bad;
-
- len = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- pr_info("trapped io 0x%08lx overrides %s 0x%08lx\n",
- (unsigned long)(tiop->virt_base + len),
- res->flags & IORESOURCE_IO ? "io" : "mmio",
- (unsigned long)res->start);
- len += roundup(resource_size(res), PAGE_SIZE);
- }
-
- tiop->magic = IO_TRAPPED_MAGIC;
- INIT_LIST_HEAD(&tiop->list);
- spin_lock_irq(&trapped_lock);
-#ifdef CONFIG_HAS_IOPORT_MAP
- if (flags & IORESOURCE_IO)
- list_add(&tiop->list, &trapped_io);
-#endif
-#ifdef CONFIG_HAS_IOMEM
- if (flags & IORESOURCE_MEM)
- list_add(&tiop->list, &trapped_mem);
-#endif
- spin_unlock_irq(&trapped_lock);
-
- return 0;
- bad:
- pr_warn("unable to install trapped io filter\n");
- return -1;
-}
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
- unsigned long offset,
- unsigned long size)
-{
- unsigned long voffs;
- struct trapped_io *tiop;
- struct resource *res;
- int k, len;
- unsigned long flags;
-
- spin_lock_irqsave(&trapped_lock, flags);
- list_for_each_entry(tiop, list, list) {
- voffs = 0;
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- if (res->start == offset) {
- spin_unlock_irqrestore(&trapped_lock, flags);
- return tiop->virt_base + voffs;
- }
-
- len = resource_size(res);
- voffs += roundup(len, PAGE_SIZE);
- }
- }
- spin_unlock_irqrestore(&trapped_lock, flags);
- return NULL;
-}
-
-static struct trapped_io *lookup_tiop(unsigned long address)
-{
- pgd_t *pgd_k;
- p4d_t *p4d_k;
- pud_t *pud_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
- pte_t entry;
-
- pgd_k = swapper_pg_dir + pgd_index(address);
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- entry = *pte_k;
-
- return pfn_to_kaddr(pte_pfn(entry));
-}
-
-static unsigned long lookup_address(struct trapped_io *tiop,
- unsigned long address)
-{
- struct resource *res;
- unsigned long vaddr = (unsigned long)tiop->virt_base;
- unsigned long len;
- int k;
-
- for (k = 0; k < tiop->num_resources; k++) {
- res = tiop->resource + k;
- len = roundup(resource_size(res), PAGE_SIZE);
- if (address < (vaddr + len))
- return res->start + (address - vaddr);
- vaddr += len;
- }
- return 0;
-}
-
-static unsigned long long copy_word(unsigned long src_addr, int src_len,
- unsigned long dst_addr, int dst_len)
-{
- unsigned long long tmp = 0;
-
- switch (src_len) {
- case 1:
- tmp = __raw_readb(src_addr);
- break;
- case 2:
- tmp = __raw_readw(src_addr);
- break;
- case 4:
- tmp = __raw_readl(src_addr);
- break;
- case 8:
- tmp = __raw_readq(src_addr);
- break;
- }
-
- switch (dst_len) {
- case 1:
- __raw_writeb(tmp, dst_addr);
- break;
- case 2:
- __raw_writew(tmp, dst_addr);
- break;
- case 4:
- __raw_writel(tmp, dst_addr);
- break;
- case 8:
- __raw_writeq(tmp, dst_addr);
- break;
- }
-
- return tmp;
-}
-
-static unsigned long from_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long src_addr = (unsigned long)src;
- unsigned long long tmp;
-
- pr_debug("trapped io read 0x%08lx (%ld)\n", src_addr, cnt);
- tiop = lookup_tiop(src_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- src_addr = lookup_address(tiop, src_addr);
- if (!src_addr)
- return cnt;
-
- tmp = copy_word(src_addr,
- max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)),
- (unsigned long)dst, cnt);
-
- pr_debug("trapped io read 0x%08lx -> 0x%08llx\n", src_addr, tmp);
- return 0;
-}
-
-static unsigned long to_device(void *dst, const void *src, unsigned long cnt)
-{
- struct trapped_io *tiop;
- unsigned long dst_addr = (unsigned long)dst;
- unsigned long long tmp;
-
- pr_debug("trapped io write 0x%08lx (%ld)\n", dst_addr, cnt);
- tiop = lookup_tiop(dst_addr);
- WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
-
- dst_addr = lookup_address(tiop, dst_addr);
- if (!dst_addr)
- return cnt;
-
- tmp = copy_word((unsigned long)src, cnt,
- dst_addr, max_t(unsigned long, cnt,
- (tiop->minimum_bus_width / 8)));
-
- pr_debug("trapped io write 0x%08lx -> 0x%08llx\n", dst_addr, tmp);
- return 0;
-}
-
-static struct mem_access trapped_io_access = {
- from_device,
- to_device,
-};
-
-int handle_trapped_io(struct pt_regs *regs, unsigned long address)
-{
- insn_size_t instruction;
- int tmp;
-
- if (trapped_io_disable)
- return 0;
- if (!lookup_tiop(address))
- return 0;
-
- WARN_ON(user_mode(regs));
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- return 0;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &trapped_io_access, 1, address);
- return tmp == 0;
-}
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
deleted file mode 100644
index 0a0dff4e66dea4..00000000000000
--- a/arch/sh/kernel/iomap.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/iomap.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-unsigned int ioread8(const void __iomem *addr)
-{
- return readb(addr);
-}
-EXPORT_SYMBOL(ioread8);
-
-unsigned int ioread16(const void __iomem *addr)
-{
- return readw(addr);
-}
-EXPORT_SYMBOL(ioread16);
-
-unsigned int ioread16be(const void __iomem *addr)
-{
- return be16_to_cpu(__raw_readw(addr));
-}
-EXPORT_SYMBOL(ioread16be);
-
-unsigned int ioread32(const void __iomem *addr)
-{
- return readl(addr);
-}
-EXPORT_SYMBOL(ioread32);
-
-unsigned int ioread32be(const void __iomem *addr)
-{
- return be32_to_cpu(__raw_readl(addr));
-}
-EXPORT_SYMBOL(ioread32be);
-
-void iowrite8(u8 val, void __iomem *addr)
-{
- writeb(val, addr);
-}
-EXPORT_SYMBOL(iowrite8);
-
-void iowrite16(u16 val, void __iomem *addr)
-{
- writew(val, addr);
-}
-EXPORT_SYMBOL(iowrite16);
-
-void iowrite16be(u16 val, void __iomem *addr)
-{
- __raw_writew(cpu_to_be16(val), addr);
-}
-EXPORT_SYMBOL(iowrite16be);
-
-void iowrite32(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-EXPORT_SYMBOL(iowrite32);
-
-void iowrite32be(u32 val, void __iomem *addr)
-{
- __raw_writel(cpu_to_be32(val), addr);
-}
-EXPORT_SYMBOL(iowrite32be);
-
-/*
- * These are the "repeat MMIO read/write" functions.
- * Note the "__raw" accesses, since we don't want to
- * convert to CPU byte order. We write in "IO byte
- * order" (we also don't have IO barriers).
- */
-static inline void mmio_insb(const void __iomem *addr, u8 *dst, int count)
-{
- while (--count >= 0) {
- u8 data = __raw_readb(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insw(const void __iomem *addr, u16 *dst, int count)
-{
- while (--count >= 0) {
- u16 data = __raw_readw(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_insl(const void __iomem *addr, u32 *dst, int count)
-{
- while (--count >= 0) {
- u32 data = __raw_readl(addr);
- *dst = data;
- dst++;
- }
-}
-
-static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
-{
- while (--count >= 0) {
- __raw_writeb(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
-{
- while (--count >= 0) {
- __raw_writew(*src, addr);
- src++;
- }
-}
-
-static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
-{
- while (--count >= 0) {
- __raw_writel(*src, addr);
- src++;
- }
-}
-
-void ioread8_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insb(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread8_rep);
-
-void ioread16_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insw(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread16_rep);
-
-void ioread32_rep(const void __iomem *addr, void *dst, unsigned long count)
-{
- mmio_insl(addr, dst, count);
-}
-EXPORT_SYMBOL(ioread32_rep);
-
-void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsb(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite8_rep);
-
-void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsw(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite16_rep);
-
-void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- mmio_outsl(addr, src, count);
-}
-EXPORT_SYMBOL(iowrite32_rep);
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
deleted file mode 100644
index f39446a658bdb8..00000000000000
--- a/arch/sh/kernel/ioport.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/ioport.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-
-unsigned long sh_io_port_base __read_mostly = -1;
-EXPORT_SYMBOL(sh_io_port_base);
-
-void __iomem *__ioport_map(unsigned long addr, unsigned int size)
-{
- if (sh_mv.mv_ioport_map)
- return sh_mv.mv_ioport_map(addr, size);
-
- return (void __iomem *)(addr + sh_io_port_base);
-}
-EXPORT_SYMBOL(__ioport_map);
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- void __iomem *ret;
-
- ret = __ioport_map_trapped(port, nr);
- if (ret)
- return ret;
-
- return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
- if (sh_mv.mv_ioport_unmap)
- sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
deleted file mode 100644
index 4e6835de54cf8e..00000000000000
--- a/arch/sh/kernel/irq.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/irq.c
- *
- * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
- *
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/ftrace.h>
-#include <linux/delay.h>
-#include <linux/ratelimit.h>
-#include <asm/processor.h>
-#include <asm/machvec.h>
-#include <linux/uaccess.h>
-#include <asm/thread_info.h>
-#include <cpu/mmu_context.h>
-#include <asm/softirq_stack.h>
-
-atomic_t irq_err_count;
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
- atomic_inc(&irq_err_count);
- printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
-#if defined(CONFIG_PROC_FS)
-/*
- * /proc/interrupts printing for arch specific interrupts
- */
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
- int j;
-
- seq_printf(p, "%*s: ", prec, "NMI");
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", per_cpu(irq_stat.__nmi_count, j));
- seq_printf(p, " Non-maskable interrupts\n");
-
- seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * per-CPU IRQ handling contexts (thread information and stack)
- */
-union irq_ctx {
- struct thread_info tinfo;
- u32 stack[THREAD_SIZE/sizeof(u32)];
-};
-
-static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
-static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-
-static inline void handle_one_irq(unsigned int irq)
-{
- union irq_ctx *curctx, *irqctx;
-
- curctx = (union irq_ctx *)current_thread_info();
- irqctx = hardirq_ctx[smp_processor_id()];
-
- /*
- * this is where we switch to the IRQ stack. However, if we are
- * already using the IRQ stack (because we interrupted a hardirq
- * handler) we can't do that and just have to keep using the
- * current stack (which is the irq stack already after all)
- */
- if (curctx != irqctx) {
- u32 *isp;
-
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
- irqctx->tinfo.task = curctx->tinfo.task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /*
- * Copy the softirq bits in preempt_count so that the
- * softirq checks work in the hardirq context.
- */
- irqctx->tinfo.preempt_count =
- (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
- (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
- __asm__ __volatile__ (
- "mov %0, r4 \n"
- "mov r15, r8 \n"
- "jsr @%1 \n"
- /* switch to the irq stack */
- " mov %2, r15 \n"
- /* restore the stack (ring zero) */
- "mov r8, r15 \n"
- : /* no outputs */
- : "r" (irq), "r" (generic_handle_irq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "t", "pr"
- );
- } else
- generic_handle_irq(irq);
-}
-
-/*
- * allocate per-cpu stacks for hardirq and for softirq processing
- */
-void irq_ctx_init(int cpu)
-{
- union irq_ctx *irqctx;
-
- if (hardirq_ctx[cpu])
- return;
-
- irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- hardirq_ctx[cpu] = irqctx;
-
- irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = 0;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
-
- softirq_ctx[cpu] = irqctx;
-
- printk("CPU %u irqstacks, hard=%p soft=%p\n",
- cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
-}
-
-void irq_ctx_exit(int cpu)
-{
- hardirq_ctx[cpu] = NULL;
-}
-
-#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
-void do_softirq_own_stack(void)
-{
- struct thread_info *curctx;
- union irq_ctx *irqctx;
- u32 *isp;
-
- curctx = current_thread_info();
- irqctx = softirq_ctx[smp_processor_id()];
- irqctx->tinfo.task = curctx->task;
- irqctx->tinfo.previous_sp = current_stack_pointer;
-
- /* build the stack frame on the softirq stack */
- isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
-
- __asm__ __volatile__ (
- "mov r15, r9 \n"
- "jsr @%0 \n"
- /* switch to the softirq stack */
- " mov %1, r15 \n"
- /* restore the thread stack */
- "mov r9, r15 \n"
- : /* no outputs */
- : "r" (__do_softirq), "r" (isp)
- : "memory", "r0", "r1", "r2", "r3", "r4",
- "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
- );
-}
-#endif
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
- generic_handle_irq(irq);
-}
-#endif
-
-asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- irq_enter();
-
- irq = irq_demux(irq_lookup(irq));
-
- if (irq != NO_IRQ_IGNORE) {
- handle_one_irq(irq);
- irq_finish(irq);
- }
-
- irq_exit();
-
- set_irq_regs(old_regs);
-
- return IRQ_HANDLED;
-}
-
-void __init init_IRQ(void)
-{
- plat_irq_setup();
-
- /* Perform the machine specific initialisation */
- if (sh_mv.mv_init_irq)
- sh_mv.mv_init_irq();
-
- intc_finalize();
-
- irq_ctx_init(smp_processor_id());
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The CPU has been marked offline. Migrate IRQs off this CPU. If
- * the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- */
-void migrate_irqs(void)
-{
- unsigned int irq, cpu = smp_processor_id();
-
- for_each_active_irq(irq) {
- struct irq_data *data = irq_get_irq_data(irq);
-
- if (irq_data_get_node(data) == cpu) {
- const struct cpumask *mask = irq_data_get_affinity_mask(data);
- unsigned int newcpu = cpumask_any_and(mask,
- cpu_online_mask);
- if (newcpu >= nr_cpu_ids) {
- pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
- irq, cpu);
-
- irq_set_affinity(irq, cpu_all_mask);
- } else {
- irq_set_affinity(irq, mask);
- }
- }
- }
-}
-#endif
diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c
deleted file mode 100644
index e09cdc4ada68c8..00000000000000
--- a/arch/sh/kernel/irq_32.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SHcompact irqflags support
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- */
-#include <linux/irqflags.h>
-#include <linux/module.h>
-
-void notrace arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __dummy0, __dummy1;
-
- if (flags == ARCH_IRQ_DISABLED) {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or #0xf0, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&z" (__dummy0)
- : /* no inputs */
- : "memory"
- );
- } else {
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
- "stc r6_bank, %1\n\t"
- "or %1, %0\n\t"
-#endif
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~ARCH_IRQ_DISABLED)
- : "memory"
- );
- }
-}
-EXPORT_SYMBOL(arch_local_irq_restore);
-
-unsigned long notrace arch_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- : "=&z" (flags)
- : /* no inputs */
- : "memory"
- );
-
- return flags;
-}
-EXPORT_SYMBOL(arch_local_save_flags);
diff --git a/arch/sh/kernel/kdebugfs.c b/arch/sh/kernel/kdebugfs.c
deleted file mode 100644
index 8b505e1556a5f8..00000000000000
--- a/arch/sh/kernel/kdebugfs.c
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-
-struct dentry *arch_debugfs_dir;
-EXPORT_SYMBOL(arch_debugfs_dir);
-
-static int __init arch_kdebugfs_init(void)
-{
- arch_debugfs_dir = debugfs_create_dir("sh", NULL);
- return 0;
-}
-arch_initcall(arch_kdebugfs_init);
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
deleted file mode 100644
index e4147efa9ec6da..00000000000000
--- a/arch/sh/kernel/kgdb.c
+++ /dev/null
@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH KGDB support
- *
- * Copyright (C) 2008 - 2012 Paul Mundt
- *
- * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
- */
-#include <linux/kgdb.h>
-#include <linux/kdebug.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/* Macros for single step instruction identification */
-#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
-#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
-#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
- (((op) & 0x7f ) << 1))
-#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
-#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
-#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
-#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
-#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
-#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
-#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
- (((op) & 0x7ff) << 1))
-#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
-#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
-#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
-#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
-#define OPCODE_RTS(op) ((op) == 0xb)
-#define OPCODE_RTE(op) ((op) == 0x2b)
-
-#define SR_T_BIT_MASK 0x1
-#define STEP_OPCODE 0xc33d
-
-/* Calculate the new address for after a step */
-static short *get_step_address(struct pt_regs *linux_regs)
-{
- insn_size_t op = __raw_readw(linux_regs->pc);
- long addr;
-
- /* BT */
- if (OPCODE_BT(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BTS */
- else if (OPCODE_BTS(op)) {
- if (linux_regs->sr & SR_T_BIT_MASK)
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BF */
- else if (OPCODE_BF(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 2;
- }
-
- /* BFS */
- else if (OPCODE_BFS(op)) {
- if (!(linux_regs->sr & SR_T_BIT_MASK))
- addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
- else
- addr = linux_regs->pc + 4; /* Not in delay slot */
- }
-
- /* BRA */
- else if (OPCODE_BRA(op))
- addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
-
- /* BRAF */
- else if (OPCODE_BRAF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BRAF_REG(op)];
-
- /* BSR */
- else if (OPCODE_BSR(op))
- addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
-
- /* BSRF */
- else if (OPCODE_BSRF(op))
- addr = linux_regs->pc + 4
- + linux_regs->regs[OPCODE_BSRF_REG(op)];
-
- /* JMP */
- else if (OPCODE_JMP(op))
- addr = linux_regs->regs[OPCODE_JMP_REG(op)];
-
- /* JSR */
- else if (OPCODE_JSR(op))
- addr = linux_regs->regs[OPCODE_JSR_REG(op)];
-
- /* RTS */
- else if (OPCODE_RTS(op))
- addr = linux_regs->pr;
-
- /* RTE */
- else if (OPCODE_RTE(op))
- addr = linux_regs->regs[15];
-
- /* Other */
- else
- addr = linux_regs->pc + instruction_size(op);
-
- flush_icache_range(addr, addr + instruction_size(op));
- return (short *)addr;
-}
-
-/*
- * Replace the instruction immediately after the current instruction
- * (i.e. next in the expected flow of control) with a trap instruction,
- * so that returning will cause only a single instruction to be executed.
- * Note that this model is slightly broken for instructions with delay
- * slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
- * instruction in the delay slot will be executed.
- */
-
-static unsigned long stepped_address;
-static insn_size_t stepped_opcode;
-
-static void do_single_step(struct pt_regs *linux_regs)
-{
- /* Determine where the target instruction will send us to */
- unsigned short *addr = get_step_address(linux_regs);
-
- stepped_address = (int)addr;
-
- /* Replace it */
- stepped_opcode = __raw_readw((long)addr);
- *addr = STEP_OPCODE;
-
- /* Flush and return */
- flush_icache_range((long)addr, (long)addr +
- instruction_size(stepped_opcode));
-}
-
-/* Undo a single step */
-static void undo_single_step(struct pt_regs *linux_regs)
-{
- /* If we have stepped, put back the old instruction */
- /* Use stepped_address in case we stopped elsewhere */
- if (stepped_opcode != 0) {
- __raw_writew(stepped_opcode, stepped_address);
- flush_icache_range(stepped_address, stepped_address + 2);
- }
-
- stepped_opcode = 0;
-}
-
-struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
- { "r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
- { "r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
- { "r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
- { "r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
- { "r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
- { "r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
- { "r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
- { "r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
- { "r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
- { "r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
- { "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
- { "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
- { "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
- { "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
- { "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
- { "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
- { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc) },
- { "pr", GDB_SIZEOF_REG, offsetof(struct pt_regs, pr) },
- { "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, sr) },
- { "gbr", GDB_SIZEOF_REG, offsetof(struct pt_regs, gbr) },
- { "mach", GDB_SIZEOF_REG, offsetof(struct pt_regs, mach) },
- { "macl", GDB_SIZEOF_REG, offsetof(struct pt_regs, macl) },
- { "vbr", GDB_SIZEOF_REG, -1 },
-};
-
-int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno < 0 || regno >= DBG_MAX_REG_NUM)
- return -EINVAL;
-
- if (dbg_reg_def[regno].offset != -1)
- memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
- dbg_reg_def[regno].size);
-
- return 0;
-}
-
-char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
-{
- if (regno >= DBG_MAX_REG_NUM || regno < 0)
- return NULL;
-
- if (dbg_reg_def[regno].size != -1)
- memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
- dbg_reg_def[regno].size);
-
- switch (regno) {
- case GDB_VBR:
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (mem));
- break;
- }
-
- return dbg_reg_def[regno].name;
-}
-
-void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
-{
- struct pt_regs *thread_regs = task_pt_regs(p);
- int reg;
-
- /* Initialize to zero */
- for (reg = 0; reg < DBG_MAX_REG_NUM; reg++)
- gdb_regs[reg] = 0;
-
- /*
- * Copy out GP regs 8 to 14.
- *
- * switch_to() relies on SR.RB toggling, so regs 0->7 are banked
- * and need privileged instructions to get to. The r15 value we
- * fetch from the thread info directly.
- */
- for (reg = GDB_R8; reg < GDB_R15; reg++)
- gdb_regs[reg] = thread_regs->regs[reg];
-
- gdb_regs[GDB_R15] = p->thread.sp;
- gdb_regs[GDB_PC] = p->thread.pc;
-
- /*
- * Additional registers we have context for
- */
- gdb_regs[GDB_PR] = thread_regs->pr;
- gdb_regs[GDB_GBR] = thread_regs->gbr;
-}
-
-int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
- char *remcomInBuffer, char *remcomOutBuffer,
- struct pt_regs *linux_regs)
-{
- unsigned long addr;
- char *ptr;
-
- /* Undo any stepping we may have done */
- undo_single_step(linux_regs);
-
- switch (remcomInBuffer[0]) {
- case 'c':
- case 's':
- /* try to read optional parameter, pc unchanged if no parm */
- ptr = &remcomInBuffer[1];
- if (kgdb_hex2long(&ptr, &addr))
- linux_regs->pc = addr;
- fallthrough;
- case 'D':
- case 'k':
- atomic_set(&kgdb_cpu_doing_single_step, -1);
-
- if (remcomInBuffer[0] == 's') {
- do_single_step(linux_regs);
- kgdb_single_step = 1;
-
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
- }
-
- return 0;
- }
-
- /* this means that we do not want to exit from the handler: */
- return -1;
-}
-
-unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
-{
- if (exception == 60)
- return instruction_pointer(regs) - 2;
- return instruction_pointer(regs);
-}
-
-void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
-{
- regs->pc = ip;
-}
-
-/*
- * The primary entry points for the kgdb debug trap table entries.
- */
-BUILD_TRAP_HANDLER(singlestep)
-{
- unsigned long flags;
- TRAP_HANDLER_DECL;
-
- local_irq_save(flags);
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- kgdb_handle_exception(0, SIGTRAP, 0, regs);
- local_irq_restore(flags);
-}
-
-static int __kgdb_notify(struct die_args *args, unsigned long cmd)
-{
- int ret;
-
- switch (cmd) {
- case DIE_BREAKPOINT:
- /*
- * This means a user thread is single stepping
- * a system call which should be ignored
- */
- if (test_thread_flag(TIF_SINGLESTEP))
- return NOTIFY_DONE;
-
- ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
- args->err, args->regs);
- if (ret)
- return NOTIFY_DONE;
-
- break;
- }
-
- return NOTIFY_STOP;
-}
-
-static int
-kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
-{
- unsigned long flags;
- int ret;
-
- local_irq_save(flags);
- ret = __kgdb_notify(ptr, cmd);
- local_irq_restore(flags);
-
- return ret;
-}
-
-static struct notifier_block kgdb_notifier = {
- .notifier_call = kgdb_notify,
-
- /*
- * Lowest-prio notifier priority, we want to be notified last:
- */
- .priority = -INT_MAX,
-};
-
-int kgdb_arch_init(void)
-{
- return register_die_notifier(&kgdb_notifier);
-}
-
-void kgdb_arch_exit(void)
-{
- unregister_die_notifier(&kgdb_notifier);
-}
-
-const struct kgdb_arch arch_kgdb_ops = {
- /* Breakpoint instruction: trapa #0x3c */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- .gdb_bpt_instr = { 0x3c, 0xc3 },
-#else
- .gdb_bpt_instr = { 0xc3, 0x3c },
-#endif
-};
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
deleted file mode 100644
index aed1ea8e2c2f06..00000000000000
--- a/arch/sh/kernel/kprobes.c
+++ /dev/null
@@ -1,452 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Kernel probes (kprobes) for SuperH
- *
- * Copyright (C) 2007 Chris Smith <chris.smith@st.com>
- * Copyright (C) 2006 Lineo Solutions, Inc.
- */
-#include <linux/kprobes.h>
-#include <linux/extable.h>
-#include <linux/ptrace.h>
-#include <linux/preempt.h>
-#include <linux/kdebug.h>
-#include <linux/slab.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-static DEFINE_PER_CPU(struct kprobe, saved_current_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode);
-static DEFINE_PER_CPU(struct kprobe, saved_next_opcode2);
-
-#define OPCODE_JMP(x) (((x) & 0xF0FF) == 0x402b)
-#define OPCODE_JSR(x) (((x) & 0xF0FF) == 0x400b)
-#define OPCODE_BRA(x) (((x) & 0xF000) == 0xa000)
-#define OPCODE_BRAF(x) (((x) & 0xF0FF) == 0x0023)
-#define OPCODE_BSR(x) (((x) & 0xF000) == 0xb000)
-#define OPCODE_BSRF(x) (((x) & 0xF0FF) == 0x0003)
-
-#define OPCODE_BF_S(x) (((x) & 0xFF00) == 0x8f00)
-#define OPCODE_BT_S(x) (((x) & 0xFF00) == 0x8d00)
-
-#define OPCODE_BF(x) (((x) & 0xFF00) == 0x8b00)
-#define OPCODE_BT(x) (((x) & 0xFF00) == 0x8900)
-
-#define OPCODE_RTS(x) (((x) & 0x000F) == 0x000b)
-#define OPCODE_RTE(x) (((x) & 0xFFFF) == 0x002b)
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
- kprobe_opcode_t opcode = *(kprobe_opcode_t *) (p->addr);
-
- if (OPCODE_RTE(opcode))
- return -EFAULT; /* Bad breakpoint */
-
- p->opcode = opcode;
-
- return 0;
-}
-
-void __kprobes arch_copy_kprobe(struct kprobe *p)
-{
- memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- p->opcode = *p->addr;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
- *p->addr = BREAKPOINT_INSTRUCTION;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
- *p->addr = p->opcode;
- flush_icache_range((unsigned long)p->addr,
- (unsigned long)p->addr + sizeof(kprobe_opcode_t));
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
- if (*p->addr == BREAKPOINT_INSTRUCTION)
- return 1;
-
- return 0;
-}
-
-/**
- * If an illegal slot instruction exception occurs for an address
- * containing a kprobe, remove the probe.
- *
- * Returns 0 if the exception was handled successfully, 1 otherwise.
- */
-int __kprobes kprobe_handle_illslot(unsigned long pc)
-{
- struct kprobe *p = get_kprobe((kprobe_opcode_t *) pc + 1);
-
- if (p != NULL) {
- printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
- (unsigned int)pc + 2);
- unregister_kprobe(p);
- return 0;
- }
-
- return 1;
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
- struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
-
- if (saved->addr) {
- arch_disarm_kprobe(p);
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
-
- saved = this_cpu_ptr(&saved_next_opcode2);
- if (saved->addr) {
- arch_disarm_kprobe(saved);
-
- saved->addr = NULL;
- saved->opcode = 0;
- }
- }
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- kcb->prev_kprobe.kp = kprobe_running();
- kcb->prev_kprobe.status = kcb->kprobe_status;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
- kcb->kprobe_status = kcb->prev_kprobe.status;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, p);
-}
-
-/*
- * Singlestep is implemented by disabling the current kprobe and setting one
- * on the next instruction, following branches. Two probes are set if the
- * branch is conditional.
- */
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
- __this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
-
- if (p != NULL) {
- struct kprobe *op1, *op2;
-
- arch_disarm_kprobe(p);
-
- op1 = this_cpu_ptr(&saved_next_opcode);
- op2 = this_cpu_ptr(&saved_next_opcode2);
-
- if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr = (kprobe_opcode_t *) regs->regs[reg_nr];
- } else if (OPCODE_BRA(p->opcode) || OPCODE_BSR(p->opcode)) {
- unsigned long disp = (p->opcode & 0x0FFF);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
-
- } else if (OPCODE_BRAF(p->opcode) || OPCODE_BSRF(p->opcode)) {
- unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
- op1->addr =
- (kprobe_opcode_t *) (regs->pc + 4 +
- regs->regs[reg_nr]);
-
- } else if (OPCODE_RTS(p->opcode)) {
- op1->addr = (kprobe_opcode_t *) regs->pr;
-
- } else if (OPCODE_BF(p->opcode) || OPCODE_BT(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 1;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else if (OPCODE_BF_S(p->opcode) || OPCODE_BT_S(p->opcode)) {
- unsigned long disp = (p->opcode & 0x00FF);
- /* case 1 */
- op1->addr = p->addr + 2;
- /* case 2 */
- op2->addr =
- (kprobe_opcode_t *) (regs->pc + 4 + disp * 2);
- op2->opcode = *(op2->addr);
- arch_arm_kprobe(op2);
-
- } else {
- op1->addr = p->addr + 1;
- }
-
- op1->opcode = *(op1->addr);
- arch_arm_kprobe(op1);
- }
-}
-
-/* Called with kretprobe_lock held */
-void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
- struct pt_regs *regs)
-{
- ri->ret_addr = (kprobe_opcode_t *) regs->pr;
- ri->fp = NULL;
-
- /* Replace the return addr with trampoline addr */
- regs->pr = (unsigned long)__kretprobe_trampoline;
-}
-
-static int __kprobes kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *p;
- int ret = 0;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb;
-
- /*
- * We don't want to be preempted for the entire
- * duration of kprobe processing
- */
- preempt_disable();
- kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (regs->pc);
-
- /* Check we're not actually recursing */
- if (kprobe_running()) {
- p = get_kprobe(addr);
- if (p) {
- if (kcb->kprobe_status == KPROBE_HIT_SS &&
- *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
- goto no_kprobe;
- }
- /* We have reentered the kprobe_handler(), since
- * another probe was hit while within the handler.
- * We here save the original kprobes variables and
- * just single step on the instruction of the new probe
- * without calling any user handlers.
- */
- save_previous_kprobe(kcb);
- set_current_kprobe(p, regs, kcb);
- kprobes_inc_nmissed_count(p);
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_REENTER;
- return 1;
- }
- goto no_kprobe;
- }
-
- p = get_kprobe(addr);
- if (!p) {
- /* Not one of ours: let kernel handle it */
- if (*(kprobe_opcode_t *)addr != BREAKPOINT_INSTRUCTION) {
- /*
- * The breakpoint instruction was removed right
- * after we hit it. Another cpu has removed
- * either a probepoint or a debugger breakpoint
- * at this address. In either case, no further
- * handling of this interrupt is appropriate.
- */
- ret = 1;
- }
-
- goto no_kprobe;
- }
-
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
- if (p->pre_handler && p->pre_handler(p, regs)) {
- /* handler has already set things up, so skip ss setup */
- reset_current_kprobe();
- preempt_enable_no_resched();
- return 1;
- }
-
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_HIT_SS;
- return 1;
-
-no_kprobe:
- preempt_enable_no_resched();
- return ret;
-}
-
-/*
- * For function-return probes, init_kprobes() establishes a probepoint
- * here. When a retprobed function returns, this probe is hit and
- * trampoline_probe_handler() runs, calling the kretprobe's handler.
- */
-static void __used kretprobe_trampoline_holder(void)
-{
- asm volatile (".globl __kretprobe_trampoline\n"
- "__kretprobe_trampoline:\n\t"
- "nop\n");
-}
-
-/*
- * Called when we hit the probe point at __kretprobe_trampoline
- */
-int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
-{
- regs->pc = __kretprobe_trampoline_handler(regs, NULL);
-
- return 1;
-}
-
-static int __kprobes post_kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kprobe_opcode_t *addr = NULL;
- struct kprobe *p = NULL;
-
- if (!cur)
- return 0;
-
- if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- cur->post_handler(cur, regs, 0);
- }
-
- p = this_cpu_ptr(&saved_next_opcode);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
-
- addr = __this_cpu_read(saved_current_opcode.addr);
- __this_cpu_write(saved_current_opcode.addr, NULL);
-
- p = get_kprobe(addr);
- arch_arm_kprobe(p);
-
- p = this_cpu_ptr(&saved_next_opcode2);
- if (p->addr) {
- arch_disarm_kprobe(p);
- p->addr = NULL;
- p->opcode = 0;
- }
- }
-
- /* Restore back the original saved kprobes variables and continue. */
- if (kcb->kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe(kcb);
- goto out;
- }
-
- reset_current_kprobe();
-
-out:
- preempt_enable_no_resched();
-
- return 1;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- const struct exception_table_entry *entry;
-
- switch (kcb->kprobe_status) {
- case KPROBE_HIT_SS:
- case KPROBE_REENTER:
- /*
- * We are here because the instruction being single
- * stepped caused a page fault. We reset the current
- * kprobe, point the pc back to the probe address
- * and allow the page fault handler to continue as a
- * normal page fault.
- */
- regs->pc = (unsigned long)cur->addr;
- if (kcb->kprobe_status == KPROBE_REENTER)
- restore_previous_kprobe(kcb);
- else
- reset_current_kprobe();
- preempt_enable_no_resched();
- break;
- case KPROBE_HIT_ACTIVE:
- case KPROBE_HIT_SSDONE:
- /*
- * In case the user-specified fault handler returned
- * zero, try to fix up.
- */
- if ((entry = search_exception_tables(regs->pc)) != NULL) {
- regs->pc = entry->fixup;
- return 1;
- }
-
- /*
- * fixup_exception() could not handle it,
- * Let do_page_fault() fix it.
- */
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/*
- * Wrapper routine to for handling exceptions.
- */
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct kprobe *p = NULL;
- struct die_args *args = (struct die_args *)data;
- int ret = NOTIFY_DONE;
- kprobe_opcode_t *addr = NULL;
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- addr = (kprobe_opcode_t *) (args->regs->pc);
- if (val == DIE_TRAP &&
- args->trapnr == (BREAKPOINT_INSTRUCTION & 0xff)) {
- if (!kprobe_running()) {
- if (kprobe_handler(args->regs)) {
- ret = NOTIFY_STOP;
- } else {
- /* Not a kprobe trap */
- ret = NOTIFY_DONE;
- }
- } else {
- p = get_kprobe(addr);
- if ((kcb->kprobe_status == KPROBE_HIT_SS) ||
- (kcb->kprobe_status == KPROBE_REENTER)) {
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- } else {
- if (kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- }
- }
- }
-
- return ret;
-}
-
-static struct kprobe trampoline_p = {
- .addr = (kprobe_opcode_t *)&__kretprobe_trampoline,
- .pre_handler = trampoline_probe_handler
-};
-
-int __init arch_init_kprobes(void)
-{
- return register_kprobe(&trampoline_p);
-}
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
deleted file mode 100644
index 223c14f44af7e4..00000000000000
--- a/arch/sh/kernel/machine_kexec.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- * LANDISK/sh4 supported by kogiidena
- */
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/numa.h>
-#include <linux/ftrace.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/sh_bios.h>
-#include <asm/reboot.h>
-
-typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
- unsigned long reboot_code_buffer,
- unsigned long start_address);
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-extern void *vbr_base;
-
-void native_machine_crash_shutdown(struct pt_regs *regs)
-{
- /* Nothing to do for UP, but definitely broken for SMP.. */
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
- return 0;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-}
-
-static void kexec_info(struct kimage *image)
-{
- int i;
- printk("kexec information\n");
- for (i = 0; i < image->nr_segments; i++) {
- printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
- i,
- (unsigned int)image->segment[i].mem,
- (unsigned int)image->segment[i].mem +
- image->segment[i].memsz,
- (unsigned int)image->segment[i].memsz);
- }
- printk(" start : 0x%08x\n\n", (unsigned int)image->start);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-void machine_kexec(struct kimage *image)
-{
- unsigned long page_list;
- unsigned long reboot_code_buffer;
- relocate_new_kernel_t rnk;
- unsigned long entry;
- unsigned long *ptr;
- int save_ftrace_enabled;
-
- /*
- * Nicked from the mips version of machine_kexec():
- * The generic kexec code builds a page list with physical
- * addresses. Use phys_to_virt() to convert them to virtual.
- */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (entry & IND_INDIRECTION) ?
- phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = (unsigned long) phys_to_virt(*ptr);
- }
-
-#ifdef CONFIG_KEXEC_JUMP
- if (image->preserve_context)
- save_processor_state();
-#endif
-
- save_ftrace_enabled = __ftrace_enabled_save();
-
- /* Interrupts aren't acceptable while we reboot */
- local_irq_disable();
-
- page_list = image->head;
-
- /* we need both effective and real address here */
- reboot_code_buffer =
- (unsigned long)page_address(image->control_code_page);
-
- /* copy our kernel relocation code to the control code page */
- memcpy((void *)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
-
- kexec_info(image);
- flush_cache_all();
-
- sh_bios_vbr_reload();
-
- /* now call it */
- rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer,
- (unsigned long)phys_to_virt(image->start));
-
-#ifdef CONFIG_KEXEC_JUMP
- asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-
- if (image->preserve_context)
- restore_processor_state();
-
- /* Convert page list back to physical addresses, what a mess. */
- for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
- ptr = (*ptr & IND_INDIRECTION) ?
- phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
- if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
- *ptr & IND_DESTINATION)
- *ptr = virt_to_phys(*ptr);
- }
-#endif
-
- __ftrace_enabled_restore(save_ftrace_enabled);
-}
-
-void arch_crash_save_vmcoreinfo(void)
-{
-#ifdef CONFIG_NUMA
- VMCOREINFO_SYMBOL(node_data);
- VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
-#ifdef CONFIG_X2TLB
- VMCOREINFO_CONFIG(X2TLB);
-#endif
-}
-
-void __init reserve_crashkernel(void)
-{
- unsigned long long crash_size, crash_base;
- int ret;
-
- ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
- &crash_size, &crash_base);
- if (ret == 0 && crash_size > 0) {
- crashk_res.start = crash_base;
- crashk_res.end = crash_base + crash_size - 1;
- }
-
- if (crashk_res.end == crashk_res.start)
- goto disable;
-
- crash_size = PAGE_ALIGN(resource_size(&crashk_res));
- if (!crashk_res.start) {
- unsigned long max = memblock_end_of_DRAM() - memory_limit;
- crashk_res.start = memblock_phys_alloc_range(crash_size,
- PAGE_SIZE, 0, max);
- if (!crashk_res.start) {
- pr_err("crashkernel allocation failed\n");
- goto disable;
- }
- } else {
- ret = memblock_reserve(crashk_res.start, crash_size);
- if (unlikely(ret < 0)) {
- pr_err("crashkernel reservation failed - "
- "memory is in use\n");
- goto disable;
- }
- }
-
- crashk_res.end = crashk_res.start + crash_size - 1;
-
- /*
- * Crash kernel trumps memory limit
- */
- if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
- memory_limit = 0;
- pr_info("Disabled memory limit for crashkernel\n");
- }
-
- pr_info("Reserving %ldMB of memory at 0x%08lx "
- "for crashkernel (System RAM: %ldMB)\n",
- (unsigned long)(crash_size >> 20),
- (unsigned long)(crashk_res.start),
- (unsigned long)(memblock_phys_mem_size() >> 20));
-
- return;
-
-disable:
- crashk_res.start = crashk_res.end = 0;
-}
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
deleted file mode 100644
index 57efaf5b82ae07..00000000000000
--- a/arch/sh/kernel/machvec.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/machvec.c
- *
- * The SuperH machine vector setup handlers, yanked from setup.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <asm/machvec.h>
-#include <asm/sections.h>
-#include <asm/addrspace.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-
-#define MV_NAME_SIZE 32
-
-#define for_each_mv(mv) \
- for ((mv) = (struct sh_machine_vector *)__machvec_start; \
- (mv) && (unsigned long)(mv) < (unsigned long)__machvec_end; \
- (mv)++)
-
-static struct sh_machine_vector * __init get_mv_byname(const char *name)
-{
- struct sh_machine_vector *mv;
-
- for_each_mv(mv)
- if (strcasecmp(name, mv->mv_name) == 0)
- return mv;
-
- return NULL;
-}
-
-static unsigned int __initdata machvec_selected;
-
-static int __init early_parse_mv(char *from)
-{
- char mv_name[MV_NAME_SIZE] = "";
- char *mv_end;
- char *mv_comma;
- int mv_len;
- struct sh_machine_vector *mvp;
-
- mv_end = strchr(from, ' ');
- if (mv_end == NULL)
- mv_end = from + strlen(from);
-
- mv_comma = strchr(from, ',');
- mv_len = mv_end - from;
- if (mv_len > (MV_NAME_SIZE-1))
- mv_len = MV_NAME_SIZE-1;
- memcpy(mv_name, from, mv_len);
- mv_name[mv_len] = '\0';
- from = mv_end;
-
- machvec_selected = 1;
-
- /* Boot with the generic vector */
- if (strcmp(mv_name, "generic") == 0)
- return 0;
-
- mvp = get_mv_byname(mv_name);
- if (unlikely(!mvp)) {
- pr_info("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
- for_each_mv(mvp)
- pr_cont("'%s', ", mvp->mv_name);
- pr_cont("\n\n");
- panic("Failed to select machvec '%s' -- halting.\n",
- mv_name);
- } else
- sh_mv = *mvp;
-
- return 0;
-}
-early_param("sh_mv", early_parse_mv);
-
-void __init sh_mv_setup(void)
-{
- /*
- * Only overload the machvec if one hasn't been selected on
- * the command line with sh_mv=
- */
- if (!machvec_selected) {
- unsigned long machvec_size;
-
- machvec_size = ((unsigned long)__machvec_end -
- (unsigned long)__machvec_start);
-
- /*
- * Sanity check for machvec section alignment. Ensure
- * __initmv hasn't been misused.
- */
- if (machvec_size % sizeof(struct sh_machine_vector))
- panic("machvec misaligned, invalid __initmv use?");
-
- /*
- * If the machvec hasn't been preselected, use the first
- * vector (usually the only one) from .machvec.init.
- */
- if (machvec_size >= sizeof(struct sh_machine_vector))
- sh_mv = *(struct sh_machine_vector *)__machvec_start;
- }
-
- pr_notice("Booting machvec: %s\n", get_system_type());
-
- /*
- * Manually walk the vec, fill in anything that the board hasn't yet
- * by hand, wrapping to the generic implementation.
- */
-#define mv_set(elem) do { \
- if (!sh_mv.mv_##elem) \
- sh_mv.mv_##elem = generic_##elem; \
-} while (0)
-
- mv_set(irq_demux);
- mv_set(mode_pins);
- mv_set(mem_init);
-}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
deleted file mode 100644
index b9cee98a754e51..00000000000000
--- a/arch/sh/kernel/module.c
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Kernel module help for SH.
-
- SHcompact version by Kaz Kojima and Paul Mundt.
-
- SHmedia bits:
-
- Copyright 2004 SuperH (UK) Ltd
- Author: Richard Curnow
-
- Based on the sh version, and on code from the sh64-specific parts of
- modutils, originally written by Richard Curnow and Ben Gaster.
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/bug.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/unaligned.h>
-#include <asm/dwarf.h>
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
- Elf32_Sym *sym;
- Elf32_Addr relocation;
- uint32_t *location;
- uint32_t value;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rel[i].r_info);
- relocation = sym->st_value + rel[i].r_addend;
-
- switch (ELF32_R_TYPE(rel[i].r_info)) {
- case R_SH_NONE:
- break;
- case R_SH_DIR32:
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_REL32:
- relocation = (relocation - (Elf32_Addr) location);
- value = get_unaligned(location);
- value += relocation;
- put_unaligned(value, location);
- break;
- case R_SH_IMM_LOW16:
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16:
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- case R_SH_IMM_LOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- ((relocation & 0xffff) << 10);
- break;
- case R_SH_IMM_MEDLOW16_PCREL:
- relocation -= (Elf32_Addr) location;
- *location = (*location & ~0x3fffc00) |
- (((relocation >> 16) & 0xffff) << 10);
- break;
- default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, ELF32_R_TYPE(rel[i].r_info));
- return -ENOEXEC;
- }
- }
- return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
- const Elf_Shdr *sechdrs,
- struct module *me)
-{
- int ret = 0;
-
- ret |= module_dwarf_finalize(hdr, sechdrs, me);
-
- return ret;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
- module_dwarf_cleanup(mod);
-}
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
deleted file mode 100644
index 11777867c6f5fc..00000000000000
--- a/arch/sh/kernel/nmi_debug.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Atmel Corporation
- */
-#include <linux/delay.h>
-#include <linux/kdebug.h>
-#include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/hardirq.h>
-
-enum nmi_action {
- NMI_SHOW_STATE = 1 << 0,
- NMI_SHOW_REGS = 1 << 1,
- NMI_DIE = 1 << 2,
- NMI_DEBOUNCE = 1 << 3,
-};
-
-static unsigned long nmi_actions;
-
-static int nmi_debug_notify(struct notifier_block *self,
- unsigned long val, void *data)
-{
- struct die_args *args = data;
-
- if (likely(val != DIE_NMI))
- return NOTIFY_DONE;
-
- if (nmi_actions & NMI_SHOW_STATE)
- show_state();
- if (nmi_actions & NMI_SHOW_REGS)
- show_regs(args->regs);
- if (nmi_actions & NMI_DEBOUNCE)
- mdelay(10);
- if (nmi_actions & NMI_DIE)
- return NOTIFY_BAD;
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block nmi_debug_nb = {
- .notifier_call = nmi_debug_notify,
-};
-
-static int __init nmi_debug_setup(char *str)
-{
- char *p, *sep;
-
- register_die_notifier(&nmi_debug_nb);
-
- if (*str != '=')
- return 0;
-
- for (p = str + 1; *p; p = sep + 1) {
- sep = strchr(p, ',');
- if (sep)
- *sep = 0;
- if (strcmp(p, "state") == 0)
- nmi_actions |= NMI_SHOW_STATE;
- else if (strcmp(p, "regs") == 0)
- nmi_actions |= NMI_SHOW_REGS;
- else if (strcmp(p, "debounce") == 0)
- nmi_actions |= NMI_DEBOUNCE;
- else if (strcmp(p, "die") == 0)
- nmi_actions |= NMI_DIE;
- else
- printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
- p);
- if (!sep)
- break;
- }
-
- return 0;
-}
-__setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
deleted file mode 100644
index c9d3aa18732d1d..00000000000000
--- a/arch/sh/kernel/perf_callchain.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event callchain support - SuperH architecture code
- *
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/perf_event.h>
-#include <linux/percpu.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-
-static void callchain_address(void *data, unsigned long addr, int reliable)
-{
- struct perf_callchain_entry_ctx *entry = data;
-
- if (reliable)
- perf_callchain_store(entry, addr);
-}
-
-static const struct stacktrace_ops callchain_ops = {
- .address = callchain_address,
-};
-
-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
-{
- perf_callchain_store(entry, regs->pc);
-
- unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
-}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
deleted file mode 100644
index 1d2507f2243723..00000000000000
--- a/arch/sh/kernel/perf_event.c
+++ /dev/null
@@ -1,363 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event support framework for SuperH hardware counters.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * Heavily based on the x86 and PowerPC implementations.
- *
- * x86:
- * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2009 Jaswinder Singh Rajput
- * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- *
- * ppc:
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <linux/export.h>
-#include <asm/processor.h>
-
-struct cpu_hw_events {
- struct perf_event *events[MAX_HWEVENTS];
- unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-};
-
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-static struct sh_pmu *sh_pmu __read_mostly;
-
-/* Number of perf_events counting hardware events */
-static atomic_t num_events;
-/* Used to avoid races in calling reserve/release_pmc_hardware */
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-/*
- * Stub these out for now, do something more profound later.
- */
-int reserve_pmc_hardware(void)
-{
- return 0;
-}
-
-void release_pmc_hardware(void)
-{
-}
-
-static inline int sh_pmu_initialized(void)
-{
- return !!sh_pmu;
-}
-
-/*
- * Release the PMU if this is the last perf_event.
- */
-static void hw_perf_event_destroy(struct perf_event *event)
-{
- if (!atomic_add_unless(&num_events, -1, 1)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_dec_return(&num_events) == 0)
- release_pmc_hardware();
- mutex_unlock(&pmc_reserve_mutex);
- }
-}
-
-static int hw_perf_cache_event(int config, int *evp)
-{
- unsigned long type, op, result;
- int ev;
-
- if (!sh_pmu->cache_events)
- return -EINVAL;
-
- /* unpack config */
- type = config & 0xff;
- op = (config >> 8) & 0xff;
- result = (config >> 16) & 0xff;
-
- if (type >= PERF_COUNT_HW_CACHE_MAX ||
- op >= PERF_COUNT_HW_CACHE_OP_MAX ||
- result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return -EINVAL;
-
- ev = (*sh_pmu->cache_events)[type][op][result];
- if (ev == 0)
- return -EOPNOTSUPP;
- if (ev == -1)
- return -EINVAL;
- *evp = ev;
- return 0;
-}
-
-static int __hw_perf_event_init(struct perf_event *event)
-{
- struct perf_event_attr *attr = &event->attr;
- struct hw_perf_event *hwc = &event->hw;
- int config = -1;
- int err;
-
- if (!sh_pmu_initialized())
- return -ENODEV;
-
- /*
- * See if we need to reserve the counter.
- *
- * If no events are currently in use, then we have to take a
- * mutex to ensure that we don't race with another task doing
- * reserve_pmc_hardware or release_pmc_hardware.
- */
- err = 0;
- if (!atomic_inc_not_zero(&num_events)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&num_events) == 0 &&
- reserve_pmc_hardware())
- err = -EBUSY;
- else
- atomic_inc(&num_events);
- mutex_unlock(&pmc_reserve_mutex);
- }
-
- if (err)
- return err;
-
- event->destroy = hw_perf_event_destroy;
-
- switch (attr->type) {
- case PERF_TYPE_RAW:
- config = attr->config & sh_pmu->raw_event_mask;
- break;
- case PERF_TYPE_HW_CACHE:
- err = hw_perf_cache_event(attr->config, &config);
- if (err)
- return err;
- break;
- case PERF_TYPE_HARDWARE:
- if (attr->config >= sh_pmu->max_events)
- return -EINVAL;
-
- config = sh_pmu->event_map(attr->config);
- break;
- }
-
- if (config == -1)
- return -EINVAL;
-
- hwc->config |= config;
-
- return 0;
-}
-
-static void sh_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
-{
- u64 prev_raw_count, new_raw_count;
- s64 delta;
- int shift = 0;
-
- /*
- * Depending on the counter configuration, they may or may not
- * be chained, in which case the previous counter value can be
- * updated underneath us if the lower-half overflows.
- *
- * Our tactic to handle this is to first atomically read and
- * exchange a new raw count - then add that new-prev delta
- * count to the generic counter atomically.
- *
- * As there is no interrupt associated with the overflow events,
- * this is the simplest approach for maintaining consistency.
- */
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- new_raw_count = sh_pmu->read(idx);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- /*
- * Now we have the new raw value and have updated the prev
- * timestamp already. We can now calculate the elapsed delta
- * (counter-)time and add that to the generic counter.
- *
- * Careful, not all hw sign-extends above the physical width
- * of the count.
- */
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
-
- local64_add(delta, &event->count);
-}
-
-static void sh_pmu_stop(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (!(event->hw.state & PERF_HES_STOPPED)) {
- sh_pmu->disable(hwc, idx);
- cpuc->events[idx] = NULL;
- event->hw.state |= PERF_HES_STOPPED;
- }
-
- if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
- sh_perf_event_update(event, &event->hw, idx);
- event->hw.state |= PERF_HES_UPTODATE;
- }
-}
-
-static void sh_pmu_start(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- if (WARN_ON_ONCE(idx == -1))
- return;
-
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
- cpuc->events[idx] = event;
- event->hw.state = 0;
- sh_pmu->enable(hwc, idx);
-}
-
-static void sh_pmu_del(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-
- sh_pmu_stop(event, PERF_EF_UPDATE);
- __clear_bit(event->hw.idx, cpuc->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static int sh_pmu_add(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
- int ret = -EAGAIN;
-
- perf_pmu_disable(event->pmu);
-
- if (__test_and_set_bit(idx, cpuc->used_mask)) {
- idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
- if (idx == sh_pmu->num_events)
- goto out;
-
- __set_bit(idx, cpuc->used_mask);
- hwc->idx = idx;
- }
-
- sh_pmu->disable(hwc, idx);
-
- event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
- if (flags & PERF_EF_START)
- sh_pmu_start(event, PERF_EF_RELOAD);
-
- perf_event_update_userpage(event);
- ret = 0;
-out:
- perf_pmu_enable(event->pmu);
- return ret;
-}
-
-static void sh_pmu_read(struct perf_event *event)
-{
- sh_perf_event_update(event, &event->hw, event->hw.idx);
-}
-
-static int sh_pmu_event_init(struct perf_event *event)
-{
- int err;
-
- /* does not support taken branch sampling */
- if (has_branch_stack(event))
- return -EOPNOTSUPP;
-
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HW_CACHE:
- case PERF_TYPE_HARDWARE:
- err = __hw_perf_event_init(event);
- break;
-
- default:
- return -ENOENT;
- }
-
- if (unlikely(err)) {
- if (event->destroy)
- event->destroy(event);
- }
-
- return err;
-}
-
-static void sh_pmu_enable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->enable_all();
-}
-
-static void sh_pmu_disable(struct pmu *pmu)
-{
- if (!sh_pmu_initialized())
- return;
-
- sh_pmu->disable_all();
-}
-
-static struct pmu pmu = {
- .pmu_enable = sh_pmu_enable,
- .pmu_disable = sh_pmu_disable,
- .event_init = sh_pmu_event_init,
- .add = sh_pmu_add,
- .del = sh_pmu_del,
- .start = sh_pmu_start,
- .stop = sh_pmu_stop,
- .read = sh_pmu_read,
-};
-
-static int sh_pmu_prepare_cpu(unsigned int cpu)
-{
- struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
-
- memset(cpuhw, 0, sizeof(struct cpu_hw_events));
- return 0;
-}
-
-int register_sh_pmu(struct sh_pmu *_pmu)
-{
- if (sh_pmu)
- return -EBUSY;
- sh_pmu = _pmu;
-
- pr_info("Performance Events: %s support registered\n", _pmu->name);
-
- /*
- * All of the on-chip counters are "limited", in that they have
- * no interrupts, and are therefore unable to do sampling without
- * further work and timer assistance.
- */
- pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-
- WARN_ON(_pmu->num_events > MAX_HWEVENTS);
-
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
- cpuhp_setup_state(CPUHP_PERF_SUPERH, "PERF_SUPERH", sh_pmu_prepare_cpu,
- NULL);
- return 0;
-}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
deleted file mode 100644
index 169832fcf21b2f..00000000000000
--- a/arch/sh/kernel/process.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task_stack.h>
-#include <linux/export.h>
-#include <linux/stackprotector.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-struct kmem_cache *task_xstate_cachep = NULL;
-unsigned int xstate_size;
-
-#ifdef CONFIG_STACKPROTECTOR
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
-/*
- * this gets called so that we can store lazy state into memory and copy the
- * current task into the new thread.
- */
-int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
-{
- unlazy_fpu(src, task_pt_regs(src));
- *dst = *src;
-
- if (src->thread.xstate) {
- dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
- GFP_KERNEL);
- if (!dst->thread.xstate)
- return -ENOMEM;
- memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
- }
-
- return 0;
-}
-
-void free_thread_xstate(struct task_struct *tsk)
-{
- if (tsk->thread.xstate) {
- kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
- tsk->thread.xstate = NULL;
- }
-}
-
-void arch_release_task_struct(struct task_struct *tsk)
-{
- free_thread_xstate(tsk);
-}
-
-void arch_task_cache_init(void)
-{
- if (!xstate_size)
- return;
-
- task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
- __alignof__(union thread_xstate),
- SLAB_PANIC, NULL);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-# define HAVE_SOFTFP 1
-#else
-# define HAVE_SOFTFP 0
-#endif
-
-void init_thread_xstate(void)
-{
- if (boot_cpu_data.flags & CPU_HAS_FPU)
- xstate_size = sizeof(struct sh_fpu_hard_struct);
- else if (HAVE_SOFTFP)
- xstate_size = sizeof(struct sh_fpu_soft_struct);
- else
- xstate_size = 0;
-}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
deleted file mode 100644
index 92b6649d492952..00000000000000
--- a/arch/sh/kernel/process_32.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/process.c
- *
- * This file handles the architecture-dependent parts of process handling..
- *
- * Copyright (C) 1995 Linus Torvalds
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- * Copyright (C) 2002 - 2008 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/slab.h>
-#include <linux/elfcore.h>
-#include <linux/fs.h>
-#include <linux/ftrace.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/prefetch.h>
-#include <linux/stackprotector.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/fpu.h>
-#include <asm/syscalls.h>
-#include <asm/switch_to.h>
-
-void show_regs(struct pt_regs * regs)
-{
- pr_info("\n");
- show_regs_print_info(KERN_DEFAULT);
-
- pr_info("PC is at %pS\n", (void *)instruction_pointer(regs));
- pr_info("PR is at %pS\n", (void *)regs->pr);
-
- pr_info("PC : %08lx SP : %08lx SR : %08lx ", regs->pc,
- regs->regs[15], regs->sr);
-#ifdef CONFIG_MMU
- pr_cont("TEA : %08x\n", __raw_readl(MMU_TEA));
-#else
- pr_cont("\n");
-#endif
-
- pr_info("R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
- regs->regs[0], regs->regs[1], regs->regs[2], regs->regs[3]);
- pr_info("R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
- regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
- pr_info("R8 : %08lx R9 : %08lx R10 : %08lx R11 : %08lx\n",
- regs->regs[8], regs->regs[9], regs->regs[10], regs->regs[11]);
- pr_info("R12 : %08lx R13 : %08lx R14 : %08lx\n",
- regs->regs[12], regs->regs[13], regs->regs[14]);
- pr_info("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n",
- regs->mach, regs->macl, regs->gbr, regs->pr);
-
- show_trace(NULL, (unsigned long *)regs->regs[15], regs, KERN_DEFAULT);
- show_code(regs);
-}
-
-void start_thread(struct pt_regs *regs, unsigned long new_pc,
- unsigned long new_sp)
-{
- regs->pr = 0;
- regs->sr = SR_FD;
- regs->pc = new_pc;
- regs->regs[15] = new_sp;
-
- free_thread_xstate(current);
-}
-EXPORT_SYMBOL(start_thread);
-
-void flush_thread(void)
-{
- struct task_struct *tsk = current;
-
- flush_ptrace_hw_breakpoint(tsk);
-
-#if defined(CONFIG_SH_FPU)
- /* Forget lazy FPU state */
- clear_fpu(tsk, task_pt_regs(tsk));
- clear_used_math();
-#endif
-}
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
-{
- unsigned long clone_flags = args->flags;
- unsigned long usp = args->stack;
- unsigned long tls = args->tls;
- struct thread_info *ti = task_thread_info(p);
- struct pt_regs *childregs;
-
-#if defined(CONFIG_SH_DSP)
- struct task_struct *tsk = current;
-
- if (is_dsp_enabled(tsk)) {
- /* We can use the __save_dsp or just copy the struct:
- * __save_dsp(p);
- * p->thread.dsp_status.status |= SR_DSP
- */
- p->thread.dsp_status = tsk->thread.dsp_status;
- }
-#endif
-
- memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
-
- childregs = task_pt_regs(p);
- p->thread.sp = (unsigned long) childregs;
- if (unlikely(args->fn)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- p->thread.pc = (unsigned long) ret_from_kernel_thread;
- childregs->regs[4] = (unsigned long) args->fn_arg;
- childregs->regs[5] = (unsigned long) args->fn;
- childregs->sr = SR_MD;
-#if defined(CONFIG_SH_FPU)
- childregs->sr |= SR_FD;
-#endif
- ti->status &= ~TS_USEDFPU;
- p->thread.fpu_counter = 0;
- return 0;
- }
- *childregs = *current_pt_regs();
-
- if (usp)
- childregs->regs[15] = usp;
-
- if (clone_flags & CLONE_SETTLS)
- childregs->gbr = tls;
-
- childregs->regs[0] = 0; /* Set return value for child */
- p->thread.pc = (unsigned long) ret_from_fork;
- return 0;
-}
-
-/*
- * switch_to(x,y) should switch tasks from x to y.
- *
- */
-__notrace_funcgraph struct task_struct *
-__switch_to(struct task_struct *prev, struct task_struct *next)
-{
- struct thread_struct *next_t = &next->thread;
-
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
- __stack_chk_guard = next->stack_canary;
-#endif
-
- unlazy_fpu(prev, task_pt_regs(prev));
-
- /* we're going to use this soon, after a few expensive things */
- if (next->thread.fpu_counter > 5)
- prefetch(next_t->xstate);
-
-#ifdef CONFIG_MMU
- /*
- * Restore the kernel mode register
- * k7 (r7_bank1)
- */
- asm volatile("ldc %0, r7_bank"
- : /* no output */
- : "r" (task_thread_info(next)));
-#endif
-
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- if (next->thread.fpu_counter > 5)
- __fpu_state_restore();
-
- return prev;
-}
-
-unsigned long __get_wchan(struct task_struct *p)
-{
- unsigned long pc;
-
- /*
- * The same comment as on the Alpha applies here, too ...
- */
- pc = thread_saved_pc(p);
-
-#ifdef CONFIG_FRAME_POINTER
- if (in_sched_functions(pc)) {
- unsigned long schedule_frame = (unsigned long)p->thread.sp;
- return ((unsigned long *)schedule_frame)[21];
- }
-#endif
-
- return pc;
-}
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
deleted file mode 100644
index bfc59f2c2602f4..00000000000000
--- a/arch/sh/kernel/ptrace.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/ptrace.h>
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name: the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (!strcmp(roff->name, name))
- return roff->offset;
- return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset: the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (roff->offset == offset)
- return roff->name;
- return NULL;
-}
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
deleted file mode 100644
index 36f50ad81e8329..00000000000000
--- a/arch/sh/kernel/ptrace_32.c
+++ /dev/null
@@ -1,487 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH process tracing
- *
- * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- *
- * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/signal.h>
-#include <linux/io.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/elf.h>
-#include <linux/regset.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/*
- * This routine will get a word off of the process kernel stack.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- return (*((int *)stack));
-}
-
-/*
- * This routine will put a word on the process kernel stack.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
- unsigned long data)
-{
- unsigned char *stack;
-
- stack = (unsigned char *)task_pt_regs(task);
- stack += offset;
- *(unsigned long *) stack = data;
- return 0;
-}
-
-void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event_attr attr;
-
- /*
- * Disable the breakpoint request here since ptrace has defined a
- * one-shot behaviour for breakpoint exceptions.
- */
- attr = bp->attr;
- attr.disabled = true;
- modify_user_hw_breakpoint(bp, &attr);
-}
-
-static int set_single_step(struct task_struct *tsk, unsigned long addr)
-{
- struct thread_struct *thread = &tsk->thread;
- struct perf_event *bp;
- struct perf_event_attr attr;
-
- bp = thread->ptrace_bps[0];
- if (!bp) {
- ptrace_breakpoint_init(&attr);
-
- attr.bp_addr = addr;
- attr.bp_len = HW_BREAKPOINT_LEN_2;
- attr.bp_type = HW_BREAKPOINT_R;
-
- bp = register_user_hw_breakpoint(&attr, ptrace_triggered,
- NULL, tsk);
- if (IS_ERR(bp))
- return PTR_ERR(bp);
-
- thread->ptrace_bps[0] = bp;
- } else {
- int err;
-
- attr = bp->attr;
- attr.bp_addr = addr;
- /* reenable breakpoint */
- attr.disabled = false;
- err = modify_user_hw_breakpoint(bp, &attr);
- if (unlikely(err))
- return err;
- }
-
- return 0;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
- unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
-
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
-
- set_single_step(child, pc);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
-
-static int genregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_regs *regs = task_pt_regs(target);
-
- return membuf_write(&to, regs, sizeof(struct pt_regs));
-}
-
-static int genregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_regs *regs = task_pt_regs(target);
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- regs->regs,
- 0, 16 * sizeof(unsigned long));
- if (!ret && count > 0)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- ®s->pc,
- offsetof(struct pt_regs, pc),
- sizeof(struct pt_regs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_regs), -1);
-
- return ret;
-}
-
-#ifdef CONFIG_SH_FPU
-static int fpregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- return membuf_write(&to, target->thread.xstate,
- sizeof(struct user_fpu_struct));
-}
-
-static int fpregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- ret = init_fpu(target);
- if (ret)
- return ret;
-
- set_stopped_child_used_math(target);
-
- if ((boot_cpu_data.flags & CPU_HAS_FPU))
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->hardfpu, 0, -1);
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.xstate->softfpu, 0, -1);
-}
-
-static int fpregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- return tsk_used_math(target) ? regset->n : 0;
-}
-#endif
-
-#ifdef CONFIG_SH_DSP
-static int dspregs_get(struct task_struct *target,
- const struct user_regset *regset,
- struct membuf to)
-{
- const struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
-
- return membuf_write(&to, regs, sizeof(struct pt_dspregs));
-}
-
-static int dspregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct pt_dspregs *regs =
- (struct pt_dspregs *)&target->thread.dsp_status.dsp_regs;
- int ret;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs,
- 0, sizeof(struct pt_dspregs));
- if (!ret)
- user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- sizeof(struct pt_dspregs), -1);
-
- return ret;
-}
-
-static int dspregs_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- struct pt_regs *regs = task_pt_regs(target);
-
- return regs->sr & SR_DSP ? regset->n : 0;
-}
-#endif
-
-const struct pt_regs_offset regoffset_table[] = {
- REGS_OFFSET_NAME(0),
- REGS_OFFSET_NAME(1),
- REGS_OFFSET_NAME(2),
- REGS_OFFSET_NAME(3),
- REGS_OFFSET_NAME(4),
- REGS_OFFSET_NAME(5),
- REGS_OFFSET_NAME(6),
- REGS_OFFSET_NAME(7),
- REGS_OFFSET_NAME(8),
- REGS_OFFSET_NAME(9),
- REGS_OFFSET_NAME(10),
- REGS_OFFSET_NAME(11),
- REGS_OFFSET_NAME(12),
- REGS_OFFSET_NAME(13),
- REGS_OFFSET_NAME(14),
- REGS_OFFSET_NAME(15),
- REG_OFFSET_NAME(pc),
- REG_OFFSET_NAME(pr),
- REG_OFFSET_NAME(sr),
- REG_OFFSET_NAME(gbr),
- REG_OFFSET_NAME(mach),
- REG_OFFSET_NAME(macl),
- REG_OFFSET_NAME(tra),
- REG_OFFSET_END,
-};
-
-/*
- * These are our native regset flavours.
- */
-enum sh_regset {
- REGSET_GENERAL,
-#ifdef CONFIG_SH_FPU
- REGSET_FPU,
-#endif
-#ifdef CONFIG_SH_DSP
- REGSET_DSP,
-#endif
-};
-
-static const struct user_regset sh_regsets[] = {
- /*
- * Format is:
- * R0 --> R15
- * PC, PR, SR, GBR, MACH, MACL, TRA
- */
- [REGSET_GENERAL] = {
- .core_note_type = NT_PRSTATUS,
- .n = ELF_NGREG,
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = genregs_get,
- .set = genregs_set,
- },
-
-#ifdef CONFIG_SH_FPU
- [REGSET_FPU] = {
- .core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_fpu_struct) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = fpregs_get,
- .set = fpregs_set,
- .active = fpregs_active,
- },
-#endif
-
-#ifdef CONFIG_SH_DSP
- [REGSET_DSP] = {
- .n = sizeof(struct pt_dspregs) / sizeof(long),
- .size = sizeof(long),
- .align = sizeof(long),
- .regset_get = dspregs_get,
- .set = dspregs_set,
- .active = dspregs_active,
- },
-#endif
-};
-
-static const struct user_regset_view user_sh_native_view = {
- .name = "sh",
- .e_machine = EM_SH,
- .regsets = sh_regsets,
- .n = ARRAY_SIZE(sh_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
- return &user_sh_native_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- unsigned long __user *datap = (unsigned long __user *)data;
- int ret;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp;
-
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- tmp = get_stack_long(child, addr);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- if (!tsk_used_math(child)) {
- if (addr == offsetof(struct user, fpu.fpscr))
- tmp = FPSCR_INIT;
- else
- tmp = 0;
- } else {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- tmp = ((unsigned long *)child->thread.xstate)
- [index >> 2];
- }
- } else if (addr == offsetof(struct user, u_fpvalid))
- tmp = !!tsk_used_math(child);
- else if (addr == PT_TEXT_ADDR)
- tmp = child->mm->start_code;
- else if (addr == PT_DATA_ADDR)
- tmp = child->mm->start_data;
- else if (addr == PT_TEXT_END_ADDR)
- tmp = child->mm->end_code;
- else if (addr == PT_TEXT_LEN)
- tmp = child->mm->end_code - child->mm->start_code;
- else
- tmp = 0;
- ret = put_user(tmp, datap);
- break;
- }
-
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- ret = -EIO;
- if ((addr & 3) || addr < 0 ||
- addr > sizeof(struct user) - 3)
- break;
-
- if (addr < sizeof(struct pt_regs))
- ret = put_stack_long(child, addr, data);
- else if (addr >= offsetof(struct user, fpu) &&
- addr < offsetof(struct user, u_fpvalid)) {
- unsigned long index;
- ret = init_fpu(child);
- if (ret)
- break;
- index = addr - offsetof(struct user, fpu);
- set_stopped_child_used_math(child);
- ((unsigned long *)child->thread.xstate)
- [index >> 2] = data;
- ret = 0;
- } else if (addr == offsetof(struct user, u_fpvalid)) {
- conditional_stopped_child_used_math(data, child);
- ret = 0;
- }
- break;
-
- case PTRACE_GETREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
- case PTRACE_SETREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_GENERAL,
- 0, sizeof(struct pt_regs),
- datap);
-#ifdef CONFIG_SH_FPU
- case PTRACE_GETFPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
- case PTRACE_SETFPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_FPU,
- 0, sizeof(struct user_fpu_struct),
- datap);
-#endif
-#ifdef CONFIG_SH_DSP
- case PTRACE_GETDSPREGS:
- return copy_regset_to_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
- case PTRACE_SETDSPREGS:
- return copy_regset_from_user(child, &user_sh_native_view,
- REGSET_DSP,
- 0, sizeof(struct pt_dspregs),
- datap);
-#endif
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
-
- return ret;
-}
-
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
-{
- if (test_thread_flag(TIF_SYSCALL_TRACE) &&
- ptrace_report_syscall_entry(regs)) {
- regs->regs[0] = -ENOSYS;
- return -1;
- }
-
- if (secure_computing() == -1)
- return -1;
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_enter(regs, regs->regs[0]);
-
- audit_syscall_entry(regs->regs[3], regs->regs[4], regs->regs[5],
- regs->regs[6], regs->regs[7]);
-
- return 0;
-}
-
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
-{
- int step;
-
- audit_syscall_exit(regs);
-
- if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[0]);
-
- step = test_thread_flag(TIF_SINGLESTEP);
- if (step || test_thread_flag(TIF_SYSCALL_TRACE))
- ptrace_report_syscall_exit(regs, step);
-}
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
deleted file mode 100644
index e8eeedc9b1822d..00000000000000
--- a/arch/sh/kernel/reboot.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/pm.h>
-#include <linux/kexec.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-#include <asm/watchdog.h>
-#include <asm/addrspace.h>
-#include <asm/reboot.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-static void watchdog_trigger_immediate(void)
-{
- sh_wdt_write_cnt(0xFF);
- sh_wdt_write_csr(0xC2);
-}
-
-static void native_machine_restart(char * __unused)
-{
- local_irq_disable();
-
- /* Destroy all of the TLBs in preparation for reset by MMU */
- __flush_tlb_global();
-
- /* Address error with SR.BL=1 first. */
- trigger_address_error();
-
- /* If that fails or is unsupported, go for the watchdog next. */
- watchdog_trigger_immediate();
-
- /*
- * Give up and sleep.
- */
- while (1)
- cpu_sleep();
-}
-
-static void native_machine_shutdown(void)
-{
- smp_send_stop();
-}
-
-static void native_machine_power_off(void)
-{
- do_kernel_power_off();
-}
-
-static void native_machine_halt(void)
-{
- /* stop other cpus */
- machine_shutdown();
-
- /* stop this cpu */
- stop_this_cpu(NULL);
-}
-
-struct machine_ops machine_ops = {
- .power_off = native_machine_power_off,
- .shutdown = native_machine_shutdown,
- .restart = native_machine_restart,
- .halt = native_machine_halt,
-#ifdef CONFIG_KEXEC
- .crash_shutdown = native_machine_crash_shutdown,
-#endif
-};
-
-void machine_power_off(void)
-{
- machine_ops.power_off();
-}
-
-void machine_shutdown(void)
-{
- machine_ops.shutdown();
-}
-
-void machine_restart(char *cmd)
-{
- machine_ops.restart(cmd);
-}
-
-void machine_halt(void)
-{
- machine_ops.halt();
-}
-
-#ifdef CONFIG_KEXEC
-void machine_crash_shutdown(struct pt_regs *regs)
-{
- machine_ops.crash_shutdown(regs);
-}
-#endif
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
deleted file mode 100644
index d9bf2b727b429e..00000000000000
--- a/arch/sh/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * relocate_kernel.S - put the kernel image in place to boot
- * 2005.9.17 kogiidena@eggplant.ddo.jp
- *
- * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
- *
- * 2009-03-18 Magnus Damm - Added Kexec Jump support
- */
-#include <linux/linkage.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
- .globl relocate_new_kernel
-relocate_new_kernel:
- /* r4 = indirection_page */
- /* r5 = reboot_code_buffer */
- /* r6 = start_address */
-
- mov.l 10f, r0 /* PAGE_SIZE */
- add r5, r0 /* setup new stack at end of control page */
-
- /* save r15->r8 to new stack */
- mov.l r15, @-r0
- mov r0, r15
- mov.l r14, @-r15
- mov.l r13, @-r15
- mov.l r12, @-r15
- mov.l r11, @-r15
- mov.l r10, @-r15
- mov.l r9, @-r15
- mov.l r8, @-r15
-
- /* save other random registers */
- sts.l macl, @-r15
- sts.l mach, @-r15
- stc.l gbr, @-r15
- stc.l ssr, @-r15
- stc.l sr, @-r15
- sts.l pr, @-r15
- stc.l spc, @-r15
-
- /* switch to bank1 and save r7->r0 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- /* switch to bank0 and save r7->r0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l r7, @-r15
- mov.l r6, @-r15
- mov.l r5, @-r15
- mov.l r4, @-r15
- mov.l r3, @-r15
- mov.l r2, @-r15
- mov.l r1, @-r15
- mov.l r0, @-r15
-
- mov.l r4, @-r15 /* save indirection page again */
-
- bsr swap_pages /* swap pages before jumping to new kernel */
- nop
-
- mova 11f, r0
- mov.l r15, @r0 /* save pointer to stack */
-
- jsr @r6 /* hand over control to new kernel */
- nop
-
- mov.l 11f, r15 /* get pointer to stack */
- mov.l @r15+, r4 /* restore r4 to get indirection page */
-
- bsr swap_pages /* swap pages back to previous state */
- nop
-
- /* make sure bank0 is active and restore r0->r7 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch to bank1 and restore r0->r7 */
- mov.l 12f, r9
- stc sr, r8
- or r9, r8
- ldc r8, sr
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
-
- /* switch back to bank0 */
- mov.l 12f, r9
- not r9, r9
- stc sr, r8
- and r9, r8
- ldc r8, sr
-
- /* restore other random registers */
- ldc.l @r15+, spc
- lds.l @r15+, pr
- ldc.l @r15+, sr
- ldc.l @r15+, ssr
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
-
- /* restore r8->r15 */
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, r15
- rts
- nop
-
-swap_pages:
- bra 1f
- mov r4,r0 /* cmd = indirection_page */
-0:
- mov.l @r4+,r0 /* cmd = *ind++ */
-
-1: /* addr = cmd & 0xfffffff0 */
- mov r0,r2
- mov #-16,r1
- and r1,r2
-
- /* if(cmd & IND_DESTINATION) dst = addr */
- tst #1,r0
- bt 2f
- bra 0b
- mov r2,r5
-
-2: /* else if(cmd & IND_INDIRECTION) ind = addr */
- tst #2,r0
- bt 3f
- bra 0b
- mov r2,r4
-
-3: /* else if(cmd & IND_DONE) return */
- tst #4,r0
- bt 4f
- rts
- nop
-
-4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
- tst #8,r0
- bt 0b
-
- mov.l 10f,r3 /* PAGE_SIZE */
- shlr2 r3
- shlr2 r3
-5:
- dt r3
-
- /* regular kexec just overwrites the destination page
- * with the contents of the source page.
- * for the kexec jump case we need to swap the contents
- * of the pages.
- * to keep it simple swap the contents for both cases.
- */
- mov.l @(0, r2), r8
- mov.l @(0, r5), r1
- mov.l r8, @(0, r5)
- mov.l r1, @(0, r2)
-
- mov.l @(4, r2), r8
- mov.l @(4, r5), r1
- mov.l r8, @(4, r5)
- mov.l r1, @(4, r2)
-
- mov.l @(8, r2), r8
- mov.l @(8, r5), r1
- mov.l r8, @(8, r5)
- mov.l r1, @(8, r2)
-
- mov.l @(12, r2), r8
- mov.l @(12, r5), r1
- mov.l r8, @(12, r5)
- mov.l r1, @(12, r2)
-
- add #16,r5
- add #16,r2
- bf 5b
-
- bra 0b
- nop
-
- .align 2
-10:
- .long PAGE_SIZE
-11:
- .long 0
-12:
- .long 0x20000000 ! RB=1
-
-relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-relocate_new_kernel_size:
- .long relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
deleted file mode 100644
index 8838094c9ff944..00000000000000
--- a/arch/sh/kernel/return_address.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/return_address.c
- *
- * Copyright (C) 2009 Matt Fleming
- * Copyright (C) 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dwarf.h>
-
-#ifdef CONFIG_DWARF_UNWINDER
-
-void *return_address(unsigned int depth)
-{
- struct dwarf_frame *frame;
- unsigned long ra;
- int i;
-
- for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
- struct dwarf_frame *tmp;
-
- tmp = dwarf_unwind_stack(ra, frame);
- if (!tmp)
- return NULL;
-
- if (frame)
- dwarf_free_frame(frame);
-
- frame = tmp;
-
- if (!frame || !frame->return_addr)
- break;
-
- ra = frame->return_addr;
- }
-
- /* Failed to unwind the stack to the specified depth. */
- WARN_ON(i != depth + 1);
-
- if (frame)
- dwarf_free_frame(frame);
-
- return (void *)ra;
-}
-
-#else
-
-void *return_address(unsigned int depth)
-{
- return NULL;
-}
-
-#endif
-
-EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
deleted file mode 100644
index 1fcb6659822a30..00000000000000
--- a/arch/sh/kernel/setup.c
+++ /dev/null
@@ -1,356 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/setup.c
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/utsname.h>
-#include <linux/nodemask.h>
-#include <linux/cpu.h>
-#include <linux/pfn.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/err.h>
-#include <linux/crash_dump.h>
-#include <linux/mmzone.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/uaccess.h>
-#include <uapi/linux/mount.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/elf.h>
-#include <asm/sections.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/clock.h>
-#include <asm/smp.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/sparsemem.h>
-#include <asm/platform_early.h>
-
-/*
- * Initialize loops_per_jiffy as 10000000 (1000MIPS).
- * This value will be used at the very early stage of serial setup.
- * The bigger value means no problem.
- */
-struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
- [0] = {
- .type = CPU_SH_NONE,
- .family = CPU_FAMILY_UNKNOWN,
- .loops_per_jiffy = 10000000,
- .phys_bits = MAX_PHYSMEM_BITS,
- },
-};
-EXPORT_SYMBOL(cpu_data);
-
-/*
- * The machine vector. First entry in .machvec.init, or clobbered by
- * sh_mv= on the command line, prior to .machvec.init teardown.
- */
-struct sh_machine_vector sh_mv = { .mv_name = "generic", };
-EXPORT_SYMBOL(sh_mv);
-
-#ifdef CONFIG_VT
-struct screen_info screen_info;
-#endif
-
-extern int root_mountflags;
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-
-static struct resource code_resource = {
- .name = "Kernel code",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource data_resource = {
- .name = "Kernel data",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
-};
-
-unsigned long memory_start;
-EXPORT_SYMBOL(memory_start);
-unsigned long memory_end = 0;
-EXPORT_SYMBOL(memory_end);
-unsigned long memory_limit = 0;
-
-static struct resource mem_resources[MAX_NUMNODES];
-
-int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-static int __init early_parse_mem(char *p)
-{
- if (!p)
- return 1;
-
- memory_limit = PAGE_ALIGN(memparse(p, &p));
-
- pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
-
- return 0;
-}
-early_param("mem", early_parse_mem);
-
-void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- unsigned long start, end;
-
- /*
- * Check for the rare cases where boot loaders adhere to the boot
- * ABI.
- */
- if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
- goto disable;
-
- start = INITRD_START + __MEMORY_START;
- end = start + INITRD_SIZE;
-
- if (unlikely(end <= start))
- goto disable;
- if (unlikely(start & ~PAGE_MASK)) {
- pr_err("initrd must be page aligned\n");
- goto disable;
- }
-
- if (unlikely(start < __MEMORY_START)) {
- pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",
- start, __MEMORY_START);
- goto disable;
- }
-
- if (unlikely(end > memblock_end_of_DRAM())) {
- pr_err("initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- end, (unsigned long)memblock_end_of_DRAM());
- goto disable;
- }
-
- /*
- * If we got this far in spite of the boot loader's best efforts
- * to the contrary, assume we actually have a valid initrd and
- * fix up the root dev.
- */
- ROOT_DEV = Root_RAM0;
-
- /*
- * Address sanitization
- */
- initrd_start = (unsigned long)__va(start);
- initrd_end = initrd_start + INITRD_SIZE;
-
- memblock_reserve(__pa(initrd_start), INITRD_SIZE);
-
- return;
-
-disable:
- pr_info("initrd disabled\n");
- initrd_start = initrd_end = 0;
-#endif
-}
-
-#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
-void calibrate_delay(void)
-{
- struct clk *clk = clk_get(NULL, "cpu_clk");
-
- if (IS_ERR(clk))
- panic("Need a sane CPU clock definition!");
-
- loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
-
- printk(KERN_INFO "Calibrating delay loop (skipped)... "
- "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100,
- loops_per_jiffy);
-}
-#endif
-
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- struct resource *res = &mem_resources[nid];
- unsigned long start, end;
-
- WARN_ON(res->name); /* max one active range per node for now */
-
- start = start_pfn << PAGE_SHIFT;
- end = end_pfn << PAGE_SHIFT;
-
- res->name = "System RAM";
- res->start = start;
- res->end = end - 1;
- res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
- if (request_resource(&iomem_resource, res)) {
- pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
- start_pfn, end_pfn);
- return;
- }
-
- /*
- * We don't know which RAM region contains kernel data or
- * the reserved crashkernel region, so try it repeatedly
- * and let the resource manager test it.
- */
- request_resource(res, &code_resource);
- request_resource(res, &data_resource);
- request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
-#endif
-
- /*
- * Also make sure that there is a PMB mapping that covers this
- * range before we attempt to activate it, to avoid reset by MMU.
- * We can hit this path with NUMA or memory hot-add.
- */
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_set_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn - start_pfn),
- &memblock.memory, nid);
-}
-
-void __init __weak plat_early_device_setup(void)
-{
-}
-
-#ifdef CONFIG_OF_FLATTREE
-void __ref sh_fdt_init(phys_addr_t dt_phys)
-{
- static int done = 0;
- void *dt_virt;
-
- /* Avoid calling an __init function on secondary cpus. */
- if (done) return;
-
-#ifdef CONFIG_USE_BUILTIN_DTB
- dt_virt = __dtb_start;
-#else
- dt_virt = phys_to_virt(dt_phys);
-#endif
-
- if (!dt_virt || !early_init_dt_scan(dt_virt)) {
- pr_crit("Error: invalid device tree blob"
- " at physical address %p\n", (void *)dt_phys);
-
- while (true)
- cpu_relax();
- }
-
- done = 1;
-}
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
- enable_mmu();
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
- printk(KERN_NOTICE "Boot params:\n"
- "... MOUNT_ROOT_RDONLY - %08lx\n"
- "... RAMDISK_FLAGS - %08lx\n"
- "... ORIG_ROOT_DEV - %08lx\n"
- "... LOADER_TYPE - %08lx\n"
- "... INITRD_START - %08lx\n"
- "... INITRD_SIZE - %08lx\n",
- MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
- ORIG_ROOT_DEV, LOADER_TYPE,
- INITRD_START, INITRD_SIZE);
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-#endif
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- setup_initial_init_mm(_text, _etext, _edata, _end);
-
- code_resource.start = virt_to_phys(_text);
- code_resource.end = virt_to_phys(_etext)-1;
- data_resource.start = virt_to_phys(_etext);
- data_resource.end = virt_to_phys(_edata)-1;
- bss_resource.start = virt_to_phys(__bss_start);
- bss_resource.end = virt_to_phys(__bss_stop)-1;
-
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#ifdef CONFIG_CMDLINE_EXTEND
- strlcat(command_line, " ", sizeof(command_line));
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
-#endif
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_early_param();
-
- plat_early_device_setup();
-
- sh_mv_setup();
-
- /* Let earlyprintk output early console messages */
- sh_early_platform_driver_probe("earlyprintk", 1, 1);
-
-#ifdef CONFIG_OF_FLATTREE
-#ifdef CONFIG_USE_BUILTIN_DTB
- unflatten_and_copy_device_tree();
-#else
- unflatten_device_tree();
-#endif
-#endif
-
- paging_init();
-
- /* Perform the machine specific initialisation */
- if (likely(sh_mv.mv_setup))
- sh_mv.mv_setup(cmdline_p);
-
- plat_smp_setup();
-}
-
-/* processor boot mode configuration */
-int generic_mode_pins(void)
-{
- pr_warn("generic_mode_pins(): missing mode pin configuration\n");
- return 0;
-}
-
-int test_mode_pin(int pin)
-{
- return sh_mv.mv_mode_pins() & pin;
-}
diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c
deleted file mode 100644
index 250dbdf3fa7497..00000000000000
--- a/arch/sh/kernel/sh_bios.c
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * C interface for trapping into the standard LinuxSH BIOS.
- *
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 - 2010 Paul Mundt
- */
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <asm/sh_bios.h>
-
-#define BIOS_CALL_CONSOLE_WRITE 0
-#define BIOS_CALL_ETH_NODE_ADDR 10
-#define BIOS_CALL_SHUTDOWN 11
-#define BIOS_CALL_GDB_DETACH 0xff
-
-void *gdb_vbr_vector = NULL;
-
-static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
- long arg3)
-{
- register long r0 __asm__("r0") = func;
- register long r4 __asm__("r4") = arg0;
- register long r5 __asm__("r5") = arg1;
- register long r6 __asm__("r6") = arg2;
- register long r7 __asm__("r7") = arg3;
-
- if (!gdb_vbr_vector)
- return -ENOSYS;
-
- __asm__ __volatile__("trapa #0x3f":"=z"(r0)
- :"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
- :"memory");
- return r0;
-}
-
-void sh_bios_console_write(const char *buf, unsigned int len)
-{
- sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
-}
-
-void sh_bios_gdb_detach(void)
-{
- sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_gdb_detach);
-
-void sh_bios_get_node_addr(unsigned char *node_addr)
-{
- sh_bios_call(BIOS_CALL_ETH_NODE_ADDR, 0, (long)node_addr, 0, 0);
-}
-EXPORT_SYMBOL_GPL(sh_bios_get_node_addr);
-
-void sh_bios_shutdown(unsigned int how)
-{
- sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
-}
-
-/*
- * Read the old value of the VBR register to initialise the vector
- * through which debug and BIOS traps are delegated by the Linux trap
- * handler.
- */
-void sh_bios_vbr_init(void)
-{
- unsigned long vbr;
-
- if (unlikely(gdb_vbr_vector))
- return;
-
- __asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
-
- if (vbr) {
- gdb_vbr_vector = (void *)(vbr + 0x100);
- printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
- gdb_vbr_vector);
- } else
- printk(KERN_NOTICE "SH-BIOS not detected\n");
-}
-
-/**
- * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
- *
- * This can be used by save/restore code to reinitialize the system VBR
- * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
- */
-void sh_bios_vbr_reload(void)
-{
- if (gdb_vbr_vector)
- __asm__ __volatile__ (
- "ldc %0, vbr"
- :
- : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
- : "memory"
- );
-}
-
-#ifdef CONFIG_EARLY_PRINTK
-/*
- * Print a string through the BIOS
- */
-static void sh_console_write(struct console *co, const char *s,
- unsigned count)
-{
- sh_bios_console_write(s, count);
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init sh_console_setup(struct console *co, char *options)
-{
- int cflag = CREAD | HUPCL | CLOCAL;
-
- /*
- * Now construct a cflag setting.
- * TODO: this is a totally bogus cflag, as we have
- * no idea what serial settings the BIOS is using, or
- * even if its using the serial port at all.
- */
- cflag |= B115200 | CS8 | /*no parity*/0;
-
- co->cflag = cflag;
-
- return 0;
-}
-
-static struct console bios_console = {
- .name = "bios",
- .write = sh_console_write,
- .setup = sh_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
- int keep_early = 0;
-
- if (!buf)
- return 0;
-
- if (strstr(buf, "keep"))
- keep_early = 1;
-
- if (!strncmp(buf, "bios", 4))
- early_console = &bios_console;
-
- if (likely(early_console)) {
- if (keep_early)
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
- }
-
- return 0;
-}
-early_param("earlyprintk", setup_early_printk);
-#endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
deleted file mode 100644
index 5858936cb43111..00000000000000
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <asm/checksum.h>
-#include <asm/sections.h>
-
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(empty_zero_page);
-#ifdef CONFIG_FLATMEM
-/* need in pfn_valid macro */
-EXPORT_SYMBOL(min_low_pfn);
-EXPORT_SYMBOL(max_low_pfn);
-#endif
-
-#define DECLARE_EXPORT(name) \
- extern void name(void);EXPORT_SYMBOL(name)
-
-DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__sdivsi3);
-DECLARE_EXPORT(__lshrsi3);
-DECLARE_EXPORT(__ashrsi3);
-DECLARE_EXPORT(__ashlsi3);
-DECLARE_EXPORT(__lshrsi3_r0);
-DECLARE_EXPORT(__ashrsi3_r0);
-DECLARE_EXPORT(__ashlsi3_r0);
-
-DECLARE_EXPORT(__ashiftrt_r4_0);
-DECLARE_EXPORT(__ashiftrt_r4_1);
-DECLARE_EXPORT(__ashiftrt_r4_2);
-DECLARE_EXPORT(__ashiftrt_r4_3);
-DECLARE_EXPORT(__ashiftrt_r4_4);
-DECLARE_EXPORT(__ashiftrt_r4_5);
-DECLARE_EXPORT(__ashiftrt_r4_6);
-DECLARE_EXPORT(__ashiftrt_r4_7);
-DECLARE_EXPORT(__ashiftrt_r4_8);
-DECLARE_EXPORT(__ashiftrt_r4_9);
-DECLARE_EXPORT(__ashiftrt_r4_10);
-DECLARE_EXPORT(__ashiftrt_r4_11);
-DECLARE_EXPORT(__ashiftrt_r4_12);
-DECLARE_EXPORT(__ashiftrt_r4_13);
-DECLARE_EXPORT(__ashiftrt_r4_14);
-DECLARE_EXPORT(__ashiftrt_r4_15);
-DECLARE_EXPORT(__ashiftrt_r4_16);
-DECLARE_EXPORT(__ashiftrt_r4_17);
-DECLARE_EXPORT(__ashiftrt_r4_18);
-DECLARE_EXPORT(__ashiftrt_r4_19);
-DECLARE_EXPORT(__ashiftrt_r4_20);
-DECLARE_EXPORT(__ashiftrt_r4_21);
-DECLARE_EXPORT(__ashiftrt_r4_22);
-DECLARE_EXPORT(__ashiftrt_r4_23);
-DECLARE_EXPORT(__ashiftrt_r4_24);
-DECLARE_EXPORT(__ashiftrt_r4_25);
-DECLARE_EXPORT(__ashiftrt_r4_26);
-DECLARE_EXPORT(__ashiftrt_r4_27);
-DECLARE_EXPORT(__ashiftrt_r4_28);
-DECLARE_EXPORT(__ashiftrt_r4_29);
-DECLARE_EXPORT(__ashiftrt_r4_30);
-DECLARE_EXPORT(__ashiftrt_r4_31);
-DECLARE_EXPORT(__ashiftrt_r4_32);
-DECLARE_EXPORT(__movstr);
-DECLARE_EXPORT(__movstrSI8);
-DECLARE_EXPORT(__movstrSI12);
-DECLARE_EXPORT(__movstrSI16);
-DECLARE_EXPORT(__movstrSI20);
-DECLARE_EXPORT(__movstrSI24);
-DECLARE_EXPORT(__movstrSI28);
-DECLARE_EXPORT(__movstrSI32);
-DECLARE_EXPORT(__movstrSI36);
-DECLARE_EXPORT(__movstrSI40);
-DECLARE_EXPORT(__movstrSI44);
-DECLARE_EXPORT(__movstrSI48);
-DECLARE_EXPORT(__movstrSI52);
-DECLARE_EXPORT(__movstrSI56);
-DECLARE_EXPORT(__movstrSI60);
-DECLARE_EXPORT(__movstr_i4_even);
-DECLARE_EXPORT(__movstr_i4_odd);
-DECLARE_EXPORT(__movstrSI12_i4);
-DECLARE_EXPORT(__movmem);
-DECLARE_EXPORT(__movmemSI8);
-DECLARE_EXPORT(__movmemSI12);
-DECLARE_EXPORT(__movmemSI16);
-DECLARE_EXPORT(__movmemSI20);
-DECLARE_EXPORT(__movmemSI24);
-DECLARE_EXPORT(__movmemSI28);
-DECLARE_EXPORT(__movmemSI32);
-DECLARE_EXPORT(__movmemSI36);
-DECLARE_EXPORT(__movmemSI40);
-DECLARE_EXPORT(__movmemSI44);
-DECLARE_EXPORT(__movmemSI48);
-DECLARE_EXPORT(__movmemSI52);
-DECLARE_EXPORT(__movmemSI56);
-DECLARE_EXPORT(__movmemSI60);
-DECLARE_EXPORT(__movmem_i4_even);
-DECLARE_EXPORT(__movmem_i4_odd);
-DECLARE_EXPORT(__movmemSI12_i4);
-DECLARE_EXPORT(__udiv_qrnnd_16);
-DECLARE_EXPORT(__sdivsi3_i4);
-DECLARE_EXPORT(__udivsi3_i4);
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udivsi3_i4i);
-#ifdef CONFIG_MCOUNT
-DECLARE_EXPORT(mcount);
-#endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
deleted file mode 100644
index 90f495d35db29a..00000000000000
--- a/arch/sh/kernel/signal_32.c
+++ /dev/null
@@ -1,507 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- *
- * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
- *
- */
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/tty.h>
-#include <linux/elf.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/io.h>
-#include <linux/resume_user_mode.h>
-#include <asm/ucontext.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-
-struct fdpic_func_descriptor {
- unsigned long text;
- unsigned long GOT;
-};
-
-/*
- * The following define adds a 64 byte gap between the signal
- * stack frame and previous contents of the stack. This allows
- * frame unwinding in a function epilogue but only if a frame
- * pointer is used in the function. This is necessary because
- * current gcc compilers (<4.3) do not generate unwind info on
- * SH for function epilogues.
- */
-#define UNWINDGUARD 64
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
-#if defined(CONFIG_CPU_SH2)
-#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */
-#else
-#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */
-#endif
-#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */
-
-struct sigframe
-{
- struct sigcontext sc;
- unsigned long extramask[_NSIG_WORDS-1];
- u16 retcode[8];
-};
-
-struct rt_sigframe
-{
- struct siginfo info;
- struct ucontext uc;
- u16 retcode[8];
-};
-
-#ifdef CONFIG_SH_FPU
-static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- set_used_math();
- return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
- sizeof(long)*(16*2+2));
-}
-
-static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
- struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- if (!(boot_cpu_data.flags & CPU_HAS_FPU))
- return 0;
-
- if (!used_math())
- return __put_user(0, &sc->sc_ownedfp);
-
- if (__put_user(1, &sc->sc_ownedfp))
- return -EFAULT;
-
- /* This will cause a "finit" to be triggered by the next
- attempted FPU operation by the 'current' process.
- */
- clear_used_math();
-
- unlazy_fpu(tsk, regs);
- return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
- sizeof(long)*(16*2+2));
-}
-#endif /* CONFIG_SH_FPU */
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
-{
- unsigned int err = 0;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
- COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- if (boot_cpu_data.flags & CPU_HAS_FPU) {
- int owned_fp;
- struct task_struct *tsk = current;
-
- regs->sr |= SR_FD; /* Release FPU */
- clear_fpu(tsk, regs);
- clear_used_math();
- err |= __get_user (owned_fp, &sc->sc_ownedfp);
- if (owned_fp)
- err |= restore_sigcontext_fpu(sc);
- }
-#endif
-
- regs->tra = -1; /* disable syscall checks */
- err |= __get_user(*r0_p, &sc->sc_regs[0]);
- return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->sc, &r0))
- goto badframe;
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
- struct pt_regs *regs = current_pt_regs();
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15];
- sigset_t set;
- int r0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
- goto badframe;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return r0;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
-#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
- COPY(regs[0]); COPY(regs[1]);
- COPY(regs[2]); COPY(regs[3]);
- COPY(regs[4]); COPY(regs[5]);
- COPY(regs[6]); COPY(regs[7]);
- COPY(regs[8]); COPY(regs[9]);
- COPY(regs[10]); COPY(regs[11]);
- COPY(regs[12]); COPY(regs[13]);
- COPY(regs[14]); COPY(regs[15]);
- COPY(gbr); COPY(mach);
- COPY(macl); COPY(pr);
- COPY(sr); COPY(pc);
-#undef COPY
-
-#ifdef CONFIG_SH_FPU
- err |= save_sigcontext_fpu(sc, regs);
-#endif
-
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(sp) == 0)
- sp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
-}
-
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-trapa.S. */
-extern void __kernel_sigreturn(void);
-extern void __kernel_rt_sigreturn(void);
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
- if (_NSIG_WORDS > 1)
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = 0;
- regs->regs[6] = (unsigned long) &frame->sc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
- int err = 0, sig = ksig->sig;
-
- frame = get_sigframe(&ksig->ka, regs->regs[15], sizeof(*frame));
-
- if (!access_ok(frame, sizeof(*frame)))
- return -EFAULT;
-
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(NULL, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, regs->regs[15]);
- err |= setup_sigcontext(&frame->uc.uc_mcontext,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
- regs->pr = (unsigned long) ksig->ka.sa.sa_restorer;
-#ifdef CONFIG_VSYSCALL
- } else if (likely(current->mm->context.vdso)) {
- regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
-#endif
- } else {
- /* Generate return code (system call to rt_sigreturn) */
- err |= __put_user(MOVW(7), &frame->retcode[0]);
- err |= __put_user(TRAP_NOARG, &frame->retcode[1]);
- err |= __put_user(OR_R0_R0, &frame->retcode[2]);
- err |= __put_user(OR_R0_R0, &frame->retcode[3]);
- err |= __put_user(OR_R0_R0, &frame->retcode[4]);
- err |= __put_user(OR_R0_R0, &frame->retcode[5]);
- err |= __put_user(OR_R0_R0, &frame->retcode[6]);
- err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
- regs->pr = (unsigned long) frame->retcode;
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
- }
-
- if (err)
- return -EFAULT;
-
- /* Set up registers for signal handler */
- regs->regs[15] = (unsigned long) frame;
- regs->regs[4] = sig; /* Arg for signal handler */
- regs->regs[5] = (unsigned long) &frame->info;
- regs->regs[6] = (unsigned long) &frame->uc;
-
- if (current->personality & FDPIC_FUNCPTRS) {
- struct fdpic_func_descriptor __user *funcptr =
- (struct fdpic_func_descriptor __user *)ksig->ka.sa.sa_handler;
-
- err |= __get_user(regs->pc, &funcptr->text);
- err |= __get_user(regs->regs[12], &funcptr->GOT);
- } else
- regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
-
- if (err)
- return -EFAULT;
-
- pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
-
- return 0;
-}
-
-static inline void
-handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
- struct sigaction *sa)
-{
- /* If we're not from a syscall, bail out */
- if (regs->tra < 0)
- return;
-
- /* check for system call restart.. */
- switch (regs->regs[0]) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- no_system_call_restart:
- regs->regs[0] = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(sa->sa_flags & SA_RESTART))
- goto no_system_call_restart;
- fallthrough;
- case -ERESTARTNOINTR:
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- break;
- }
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs, unsigned int save_r0)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
-
- /* Set up the stack frame */
- if (ksig->ka.sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(ksig, oldset, regs);
- else
- ret = setup_frame(ksig, oldset, regs);
-
- signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, unsigned int save_r0)
-{
- struct ksignal ksig;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return;
-
- if (get_signal(&ksig)) {
- handle_syscall_restart(save_r0, regs, &ksig.ka.sa);
-
- /* Whee! Actually deliver the signal. */
- handle_signal(&ksig, regs, save_r0);
- return;
- }
-
- /* Did we come from a system call? */
- if (regs->tra >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->regs[0] == -ERESTARTNOHAND ||
- regs->regs[0] == -ERESTARTSYS ||
- regs->regs[0] == -ERESTARTNOINTR) {
- regs->regs[0] = save_r0;
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
- regs->regs[3] = __NR_restart_syscall;
- }
- }
-
- /*
- * If there's no signal to deliver, we just put the saved sigmask
- * back.
- */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
- unsigned long thread_info_flags)
-{
- /* deal with pending signal delivery */
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
- do_signal(regs, save_r0);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME)
- resume_user_mode_work(regs);
-}
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
deleted file mode 100644
index 65924d9ec24598..00000000000000
--- a/arch/sh/kernel/smp.c
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/smp.c
- *
- * SMP support for the SuperH processors.
- *
- * Copyright (C) 2002 - 2010 Paul Mundt
- * Copyright (C) 2006 - 2007 Akio Idehara
- */
-#include <linux/err.h>
-#include <linux/cache.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/sched/mm.h>
-#include <linux/sched/hotplug.h>
-#include <linux/atomic.h>
-#include <linux/clockchips.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
-int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */
-
-struct plat_smp_ops *mp_ops = NULL;
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-void register_smp_ops(struct plat_smp_ops *ops)
-{
- if (mp_ops)
- printk(KERN_WARNING "Overriding previously set SMP ops\n");
-
- mp_ops = ops;
-}
-
-static inline void smp_store_cpu_info(unsigned int cpu)
-{
- struct sh_cpuinfo *c = cpu_data + cpu;
-
- memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
-
- c->loops_per_jiffy = loops_per_jiffy;
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- unsigned int cpu = smp_processor_id();
-
- init_new_context(current, &init_mm);
- current_thread_info()->cpu = cpu;
- mp_ops->prepare_cpus(max_cpus);
-
-#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(cpu_possible_mask);
-#endif
-}
-
-void __init smp_prepare_boot_cpu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- __cpu_number_map[0] = cpu;
- __cpu_logical_map[0] = cpu;
-
- set_cpu_online(cpu, true);
- set_cpu_possible(cpu, true);
-
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void native_cpu_die(unsigned int cpu)
-{
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- smp_rmb();
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- if (system_state == SYSTEM_RUNNING)
- pr_info("CPU %u is now offline\n", cpu);
-
- return;
- }
-
- msleep(100);
- }
-
- pr_err("CPU %u didn't die...\n", cpu);
-}
-
-int native_cpu_disable(unsigned int cpu)
-{
- return cpu == 0 ? -EPERM : 0;
-}
-
-void play_dead_common(void)
-{
- idle_task_exit();
- irq_ctx_exit(raw_smp_processor_id());
- mb();
-
- __this_cpu_write(cpu_state, CPU_DEAD);
- local_irq_disable();
-}
-
-void native_play_dead(void)
-{
- play_dead_common();
-}
-
-int __cpu_disable(void)
-{
- unsigned int cpu = smp_processor_id();
- int ret;
-
- ret = mp_ops->cpu_disable(cpu);
- if (ret)
- return ret;
-
- /*
- * Take this CPU offline. Once we clear this, we can't return,
- * and we must not schedule until we're ready to give up the cpu.
- */
- set_cpu_online(cpu, false);
-
- /*
- * OK - migrate IRQs away from this CPU
- */
- migrate_irqs();
-
- /*
- * Flush user cache and TLB mappings, and then remove this CPU
- * from the vm mask set of all processes.
- */
- flush_cache_all();
-#ifdef CONFIG_MMU
- local_flush_tlb_all();
-#endif
-
- clear_tasks_mm_cpumask(cpu);
-
- return 0;
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int native_cpu_disable(unsigned int cpu)
-{
- return -ENOSYS;
-}
-
-void native_cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-
-void native_play_dead(void)
-{
- BUG();
-}
-#endif
-
-asmlinkage void start_secondary(void)
-{
- unsigned int cpu = smp_processor_id();
- struct mm_struct *mm = &init_mm;
-
- enable_mmu();
- mmgrab(mm);
- mmget(mm);
- current->active_mm = mm;
-#ifdef CONFIG_MMU
- enter_lazy_tlb(mm, current);
- local_flush_tlb_all();
-#endif
-
- per_cpu_trap_init();
-
- notify_cpu_starting(cpu);
-
- local_irq_enable();
-
- calibrate_delay();
-
- smp_store_cpu_info(cpu);
-
- set_cpu_online(cpu, true);
- per_cpu(cpu_state, cpu) = CPU_ONLINE;
-
- cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-}
-
-extern struct {
- unsigned long sp;
- unsigned long bss_start;
- unsigned long bss_end;
- void *start_kernel_fn;
- void *cpu_init_fn;
- void *thread_info;
-} stack_start;
-
-int __cpu_up(unsigned int cpu, struct task_struct *tsk)
-{
- unsigned long timeout;
-
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-
- /* Fill in data in head.S for secondary cpus */
- stack_start.sp = tsk->thread.sp;
- stack_start.thread_info = tsk->stack;
- stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
- stack_start.start_kernel_fn = start_secondary;
-
- flush_icache_range((unsigned long)&stack_start,
- (unsigned long)&stack_start + sizeof(stack_start));
- wmb();
-
- mp_ops->start_cpu(cpu, (unsigned long)_stext);
-
- timeout = jiffies + HZ;
- while (time_before(jiffies, timeout)) {
- if (cpu_online(cpu))
- break;
-
- udelay(10);
- barrier();
- }
-
- if (cpu_online(cpu))
- return 0;
-
- return -ENOENT;
-}
-
-void __init smp_cpus_done(unsigned int max_cpus)
-{
- unsigned long bogosum = 0;
- int cpu;
-
- for_each_online_cpu(cpu)
- bogosum += cpu_data[cpu].loops_per_jiffy;
-
- printk(KERN_INFO "SMP: Total of %d processors activated "
- "(%lu.%02lu BogoMIPS).\n", num_online_cpus(),
- bogosum / (500000/HZ),
- (bogosum / (5000/HZ)) % 100);
-}
-
-void smp_send_reschedule(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_RESCHEDULE);
-}
-
-void smp_send_stop(void)
-{
- smp_call_function(stop_this_cpu, 0, 0);
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION);
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
- mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
-}
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-void tick_broadcast(const struct cpumask *mask)
-{
- int cpu;
-
- for_each_cpu(cpu, mask)
- mp_ops->send_ipi(cpu, SMP_MSG_TIMER);
-}
-
-static void ipi_timer(void)
-{
- irq_enter();
- tick_receive_broadcast();
- irq_exit();
-}
-#endif
-
-void smp_message_recv(unsigned int msg)
-{
- switch (msg) {
- case SMP_MSG_FUNCTION:
- generic_smp_call_function_interrupt();
- break;
- case SMP_MSG_RESCHEDULE:
- scheduler_ipi();
- break;
- case SMP_MSG_FUNCTION_SINGLE:
- generic_smp_call_function_single_interrupt();
- break;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- case SMP_MSG_TIMER:
- ipi_timer();
- break;
-#endif
- default:
- printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
- smp_processor_id(), __func__, msg);
- break;
- }
-}
-
-/* Not really SMP stuff ... */
-int setup_profiling_timer(unsigned int multiplier)
-{
- return 0;
-}
-
-#ifdef CONFIG_MMU
-
-static void flush_tlb_all_ipi(void *info)
-{
- local_flush_tlb_all();
-}
-
-void flush_tlb_all(void)
-{
- on_each_cpu(flush_tlb_all_ipi, 0, 1);
-}
-
-static void flush_tlb_mm_ipi(void *mm)
-{
- local_flush_tlb_mm((struct mm_struct *)mm);
-}
-
-/*
- * The following tlb flush calls are invoked when old translations are
- * being torn down, or pte attributes are changing. For single threaded
- * address spaces, a new context is obtained on the current cpu, and tlb
- * context on other cpus are invalidated to force a new context allocation
- * at switch_mm time, should the mm ever be used on other cpus. For
- * multithreaded address spaces, intercpu interrupts have to be sent.
- * Another case where intercpu interrupts are required is when the target
- * mm might be active on another cpu (eg debuggers doing the flushes on
- * behalf of debugees, kswapd stealing pages from another process etc).
- * Kanoj 07/00.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
- preempt_disable();
-
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_mm(mm);
-
- preempt_enable();
-}
-
-struct flush_tlb_data {
- struct vm_area_struct *vma;
- unsigned long addr1;
- unsigned long addr2;
-};
-
-static void flush_tlb_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
-
- preempt_disable();
- if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = start;
- fd.addr2 = end;
- smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, mm) = 0;
- }
- local_flush_tlb_range(vma, start, end);
- preempt_enable();
-}
-
-static void flush_tlb_kernel_range_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = start;
- fd.addr2 = end;
- on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
-}
-
-static void flush_tlb_page_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
-
- local_flush_tlb_page(fd->vma, fd->addr1);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- preempt_disable();
- if ((atomic_read(&vma->vm_mm->mm_users) != 1) ||
- (current->mm != vma->vm_mm)) {
- struct flush_tlb_data fd;
-
- fd.vma = vma;
- fd.addr1 = page;
- smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
- } else {
- int i;
- for_each_online_cpu(i)
- if (smp_processor_id() != i)
- cpu_context(i, vma->vm_mm) = 0;
- }
- local_flush_tlb_page(vma, page);
- preempt_enable();
-}
-
-static void flush_tlb_one_ipi(void *info)
-{
- struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
- local_flush_tlb_one(fd->addr1, fd->addr2);
-}
-
-void flush_tlb_one(unsigned long asid, unsigned long vaddr)
-{
- struct flush_tlb_data fd;
-
- fd.addr1 = asid;
- fd.addr2 = vaddr;
-
- smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
- local_flush_tlb_one(asid, vaddr);
-}
-
-#endif
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
deleted file mode 100644
index daf0b53ee066fa..00000000000000
--- a/arch/sh/kernel/stacktrace.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/stacktrace.c
- *
- * Stack trace management functions
- *
- * Copyright (C) 2006 - 2008 Paul Mundt
- */
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- */
-static void save_stack_address(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = data;
-
- if (!reliable)
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops = {
- .address = save_stack_address,
-};
-
-void save_stack_trace(struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)current_stack_pointer;
-
- unwind_stack(current, NULL, sp, &save_stack_ops, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-
-static void
-save_stack_address_nosched(void *data, unsigned long addr, int reliable)
-{
- struct stack_trace *trace = (struct stack_trace *)data;
-
- if (!reliable)
- return;
-
- if (in_sched_functions(addr))
- return;
-
- if (trace->skip > 0) {
- trace->skip--;
- return;
- }
-
- if (trace->nr_entries < trace->max_entries)
- trace->entries[trace->nr_entries++] = addr;
-}
-
-static const struct stacktrace_ops save_stack_ops_nosched = {
- .address = save_stack_address_nosched,
-};
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
- unsigned long *sp = (unsigned long *)tsk->thread.sp;
-
- unwind_stack(current, NULL, sp, &save_stack_ops_nosched, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c
deleted file mode 100644
index 0b772d6d714fed..00000000000000
--- a/arch/sh/kernel/swsusp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * swsusp.c - SuperH hibernation support
- *
- * Copyright (C) 2009 Magnus Damm
- */
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <asm/fpu.h>
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
- return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
- init_fpu(current);
-}
-
-void restore_processor_state(void)
-{
- local_flush_tlb_all();
-}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
deleted file mode 100644
index a5a7b33ed81ae9..00000000000000
--- a/arch/sh/kernel/sys_sh.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/kernel/sys_sh.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/SuperH
- * platform.
- *
- * Taken from i386 version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/syscalls.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/cacheflush.h>
-#include <asm/cachectl.h>
-
-asmlinkage int old_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- int fd, unsigned long off)
-{
- if (off & ~PAGE_MASK)
- return -EINVAL;
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff)
-{
- /*
- * The shift for mmap2 is constant, regardless of PAGE_SIZE
- * setting.
- */
- if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
- return -EINVAL;
-
- pgoff >>= PAGE_SHIFT - 12;
-
- return ksys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
-}
-
-/* sys_cacheflush -- flush (part of) the processor cache. */
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
-{
- struct vm_area_struct *vma;
-
- if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
- return -EINVAL;
-
- /*
- * Verify that the specified address region actually belongs
- * to this process.
- */
- if (addr + len < addr)
- return -EFAULT;
-
- mmap_read_lock(current->mm);
- vma = find_vma (current->mm, addr);
- if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
-
- switch (op & CACHEFLUSH_D_PURGE) {
- case CACHEFLUSH_D_INVAL:
- __flush_invalidate_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_WB:
- __flush_wback_region((void *)addr, len);
- break;
- case CACHEFLUSH_D_PURGE:
- __flush_purge_region((void *)addr, len);
- break;
- }
-
- if (op & CACHEFLUSH_I)
- flush_icache_range(addr, addr+len);
-
- mmap_read_unlock(current->mm);
- return 0;
-}
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
deleted file mode 100644
index 9dca568509a5e5..00000000000000
--- a/arch/sh/kernel/sys_sh32.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-#include <asm/cacheflush.h>
-#include <linux/uaccess.h>
-#include <asm/unistd.h>
-#include <asm/syscalls.h>
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_sh_pipe(void)
-{
- int fd[2];
- int error;
-
- error = do_pipe_flags(fd, 0);
- if (!error) {
- current_pt_regs()->regs[1] = fd[1];
- return fd[0];
- }
- return error;
-}
-
-asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pread64(fd, buf, count, pos);
-}
-
-asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
- size_t count, long dummy, loff_t pos)
-{
- return ksys_pwrite64(fd, buf, count, pos);
-}
-
-asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
- u32 len0, u32 len1, int advice)
-{
-#ifdef __LITTLE_ENDIAN__
- return ksys_fadvise64_64(fd, (u64)offset1 << 32 | offset0,
- (u64)len1 << 32 | len0, advice);
-#else
- return ksys_fadvise64_64(fd, (u64)offset0 << 32 | offset1,
- (u64)len0 << 32 | len1, advice);
-#endif
-}
diff --git a/arch/sh/kernel/syscalls/Makefile b/arch/sh/kernel/syscalls/Makefile
deleted file mode 100644
index b265e4bc16c2e0..00000000000000
--- a/arch/sh/kernel/syscalls/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-kapi := arch/$(SRCARCH)/include/generated/asm
-uapi := arch/$(SRCARCH)/include/generated/uapi/asm
-
-$(shell mkdir -p $(uapi) $(kapi))
-
-syscall := $(src)/syscall.tbl
-syshdr := $(srctree)/scripts/syscallhdr.sh
-systbl := $(srctree)/scripts/syscalltbl.sh
-
-quiet_cmd_syshdr = SYSHDR $@
- cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
-
-quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
-
-$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
- $(call if_changed,syshdr)
-
-$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-uapisyshdr-y += unistd_32.h
-kapisyshdr-y += syscall_table.h
-
-uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
-kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
-targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
-
-PHONY += all
-all: $(uapisyshdr-y) $(kapisyshdr-y)
- @:
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
deleted file mode 100644
index 2de85c977f54f9..00000000000000
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ /dev/null
@@ -1,455 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
-#
-# system call numbers and entry vectors for sh
-#
-# The format is:
-# <number> <abi> <name> <entry point>
-#
-# The <abi> is always "common" for this file
-#
-0 common restart_syscall sys_restart_syscall
-1 common exit sys_exit
-2 common fork sys_fork
-3 common read sys_read
-4 common write sys_write
-5 common open sys_open
-6 common close sys_close
-7 common waitpid sys_waitpid
-8 common creat sys_creat
-9 common link sys_link
-10 common unlink sys_unlink
-11 common execve sys_execve
-12 common chdir sys_chdir
-13 common time sys_time32
-14 common mknod sys_mknod
-15 common chmod sys_chmod
-16 common lchown sys_lchown16
-# 17 was break
-18 common oldstat sys_stat
-19 common lseek sys_lseek
-20 common getpid sys_getpid
-21 common mount sys_mount
-22 common umount sys_oldumount
-23 common setuid sys_setuid16
-24 common getuid sys_getuid16
-25 common stime sys_stime32
-26 common ptrace sys_ptrace
-27 common alarm sys_alarm
-28 common oldfstat sys_fstat
-29 common pause sys_pause
-30 common utime sys_utime32
-# 31 was stty
-# 32 was gtty
-33 common access sys_access
-34 common nice sys_nice
-# 35 was ftime
-36 common sync sys_sync
-37 common kill sys_kill
-38 common rename sys_rename
-39 common mkdir sys_mkdir
-40 common rmdir sys_rmdir
-41 common dup sys_dup
-42 common pipe sys_sh_pipe
-43 common times sys_times
-# 44 was prof
-45 common brk sys_brk
-46 common setgid sys_setgid16
-47 common getgid sys_getgid16
-48 common signal sys_signal
-49 common geteuid sys_geteuid16
-50 common getegid sys_getegid16
-51 common acct sys_acct
-52 common umount2 sys_umount
-# 53 was lock
-54 common ioctl sys_ioctl
-55 common fcntl sys_fcntl
-# 56 was mpx
-57 common setpgid sys_setpgid
-# 58 was ulimit
-# 59 was olduname
-60 common umask sys_umask
-61 common chroot sys_chroot
-62 common ustat sys_ustat
-63 common dup2 sys_dup2
-64 common getppid sys_getppid
-65 common getpgrp sys_getpgrp
-66 common setsid sys_setsid
-67 common sigaction sys_sigaction
-68 common sgetmask sys_sgetmask
-69 common ssetmask sys_ssetmask
-70 common setreuid sys_setreuid16
-71 common setregid sys_setregid16
-72 common sigsuspend sys_sigsuspend
-73 common sigpending sys_sigpending
-74 common sethostname sys_sethostname
-75 common setrlimit sys_setrlimit
-76 common getrlimit sys_old_getrlimit
-77 common getrusage sys_getrusage
-78 common gettimeofday sys_gettimeofday
-79 common settimeofday sys_settimeofday
-80 common getgroups sys_getgroups16
-81 common setgroups sys_setgroups16
-# 82 was select
-83 common symlink sys_symlink
-84 common oldlstat sys_lstat
-85 common readlink sys_readlink
-86 common uselib sys_uselib
-87 common swapon sys_swapon
-88 common reboot sys_reboot
-89 common readdir sys_old_readdir
-90 common mmap old_mmap
-91 common munmap sys_munmap
-92 common truncate sys_truncate
-93 common ftruncate sys_ftruncate
-94 common fchmod sys_fchmod
-95 common fchown sys_fchown16
-96 common getpriority sys_getpriority
-97 common setpriority sys_setpriority
-# 98 was profil
-99 common statfs sys_statfs
-100 common fstatfs sys_fstatfs
-# 101 was ioperm
-102 common socketcall sys_socketcall
-103 common syslog sys_syslog
-104 common setitimer sys_setitimer
-105 common getitimer sys_getitimer
-106 common stat sys_newstat
-107 common lstat sys_newlstat
-108 common fstat sys_newfstat
-109 common olduname sys_uname
-# 110 was iopl
-111 common vhangup sys_vhangup
-# 112 was idle
-# 113 was vm86old
-114 common wait4 sys_wait4
-115 common swapoff sys_swapoff
-116 common sysinfo sys_sysinfo
-117 common ipc sys_ipc
-118 common fsync sys_fsync
-119 common sigreturn sys_sigreturn
-120 common clone sys_clone
-121 common setdomainname sys_setdomainname
-122 common uname sys_newuname
-123 common cacheflush sys_cacheflush
-124 common adjtimex sys_adjtimex_time32
-125 common mprotect sys_mprotect
-126 common sigprocmask sys_sigprocmask
-# 127 was create_module
-128 common init_module sys_init_module
-129 common delete_module sys_delete_module
-# 130 was get_kernel_syms
-131 common quotactl sys_quotactl
-132 common getpgid sys_getpgid
-133 common fchdir sys_fchdir
-134 common bdflush sys_ni_syscall
-135 common sysfs sys_sysfs
-136 common personality sys_personality
-# 137 was afs_syscall
-138 common setfsuid sys_setfsuid16
-139 common setfsgid sys_setfsgid16
-140 common _llseek sys_llseek
-141 common getdents sys_getdents
-142 common _newselect sys_select
-143 common flock sys_flock
-144 common msync sys_msync
-145 common readv sys_readv
-146 common writev sys_writev
-147 common getsid sys_getsid
-148 common fdatasync sys_fdatasync
-149 common _sysctl sys_ni_syscall
-150 common mlock sys_mlock
-151 common munlock sys_munlock
-152 common mlockall sys_mlockall
-153 common munlockall sys_munlockall
-154 common sched_setparam sys_sched_setparam
-155 common sched_getparam sys_sched_getparam
-156 common sched_setscheduler sys_sched_setscheduler
-157 common sched_getscheduler sys_sched_getscheduler
-158 common sched_yield sys_sched_yield
-159 common sched_get_priority_max sys_sched_get_priority_max
-160 common sched_get_priority_min sys_sched_get_priority_min
-161 common sched_rr_get_interval sys_sched_rr_get_interval_time32
-162 common nanosleep sys_nanosleep_time32
-163 common mremap sys_mremap
-164 common setresuid sys_setresuid16
-165 common getresuid sys_getresuid16
-# 166 was vm86
-# 167 was query_module
-168 common poll sys_poll
-169 common nfsservctl sys_ni_syscall
-170 common setresgid sys_setresgid16
-171 common getresgid sys_getresgid16
-172 common prctl sys_prctl
-173 common rt_sigreturn sys_rt_sigreturn
-174 common rt_sigaction sys_rt_sigaction
-175 common rt_sigprocmask sys_rt_sigprocmask
-176 common rt_sigpending sys_rt_sigpending
-177 common rt_sigtimedwait sys_rt_sigtimedwait_time32
-178 common rt_sigqueueinfo sys_rt_sigqueueinfo
-179 common rt_sigsuspend sys_rt_sigsuspend
-180 common pread64 sys_pread_wrapper
-181 common pwrite64 sys_pwrite_wrapper
-182 common chown sys_chown16
-183 common getcwd sys_getcwd
-184 common capget sys_capget
-185 common capset sys_capset
-186 common sigaltstack sys_sigaltstack
-187 common sendfile sys_sendfile
-# 188 is reserved for getpmsg
-# 189 is reserved for putpmsg
-190 common vfork sys_vfork
-191 common ugetrlimit sys_getrlimit
-192 common mmap2 sys_mmap2
-193 common truncate64 sys_truncate64
-194 common ftruncate64 sys_ftruncate64
-195 common stat64 sys_stat64
-196 common lstat64 sys_lstat64
-197 common fstat64 sys_fstat64
-198 common lchown32 sys_lchown
-199 common getuid32 sys_getuid
-200 common getgid32 sys_getgid
-201 common geteuid32 sys_geteuid
-202 common getegid32 sys_getegid
-203 common setreuid32 sys_setreuid
-204 common setregid32 sys_setregid
-205 common getgroups32 sys_getgroups
-206 common setgroups32 sys_setgroups
-207 common fchown32 sys_fchown
-208 common setresuid32 sys_setresuid
-209 common getresuid32 sys_getresuid
-210 common setresgid32 sys_setresgid
-211 common getresgid32 sys_getresgid
-212 common chown32 sys_chown
-213 common setuid32 sys_setuid
-214 common setgid32 sys_setgid
-215 common setfsuid32 sys_setfsuid
-216 common setfsgid32 sys_setfsgid
-217 common pivot_root sys_pivot_root
-218 common mincore sys_mincore
-219 common madvise sys_madvise
-220 common getdents64 sys_getdents64
-221 common fcntl64 sys_fcntl64
-# 222 is reserved for tux
-# 223 is unused
-224 common gettid sys_gettid
-225 common readahead sys_readahead
-226 common setxattr sys_setxattr
-227 common lsetxattr sys_lsetxattr
-228 common fsetxattr sys_fsetxattr
-229 common getxattr sys_getxattr
-230 common lgetxattr sys_lgetxattr
-231 common fgetxattr sys_fgetxattr
-232 common listxattr sys_listxattr
-233 common llistxattr sys_llistxattr
-234 common flistxattr sys_flistxattr
-235 common removexattr sys_removexattr
-236 common lremovexattr sys_lremovexattr
-237 common fremovexattr sys_fremovexattr
-238 common tkill sys_tkill
-239 common sendfile64 sys_sendfile64
-240 common futex sys_futex_time32
-241 common sched_setaffinity sys_sched_setaffinity
-242 common sched_getaffinity sys_sched_getaffinity
-# 243 is reserved for set_thread_area
-# 244 is reserved for get_thread_area
-245 common io_setup sys_io_setup
-246 common io_destroy sys_io_destroy
-247 common io_getevents sys_io_getevents_time32
-248 common io_submit sys_io_submit
-249 common io_cancel sys_io_cancel
-250 common fadvise64 sys_fadvise64
-# 251 is unused
-252 common exit_group sys_exit_group
-253 common lookup_dcookie sys_lookup_dcookie
-254 common epoll_create sys_epoll_create
-255 common epoll_ctl sys_epoll_ctl
-256 common epoll_wait sys_epoll_wait
-257 common remap_file_pages sys_remap_file_pages
-258 common set_tid_address sys_set_tid_address
-259 common timer_create sys_timer_create
-260 common timer_settime sys_timer_settime32
-261 common timer_gettime sys_timer_gettime32
-262 common timer_getoverrun sys_timer_getoverrun
-263 common timer_delete sys_timer_delete
-264 common clock_settime sys_clock_settime32
-265 common clock_gettime sys_clock_gettime32
-266 common clock_getres sys_clock_getres_time32
-267 common clock_nanosleep sys_clock_nanosleep_time32
-268 common statfs64 sys_statfs64
-269 common fstatfs64 sys_fstatfs64
-270 common tgkill sys_tgkill
-271 common utimes sys_utimes_time32
-272 common fadvise64_64 sys_fadvise64_64_wrapper
-# 273 is reserved for vserver
-274 common mbind sys_mbind
-275 common get_mempolicy sys_get_mempolicy
-276 common set_mempolicy sys_set_mempolicy
-277 common mq_open sys_mq_open
-278 common mq_unlink sys_mq_unlink
-279 common mq_timedsend sys_mq_timedsend_time32
-280 common mq_timedreceive sys_mq_timedreceive_time32
-281 common mq_notify sys_mq_notify
-282 common mq_getsetattr sys_mq_getsetattr
-283 common kexec_load sys_kexec_load
-284 common waitid sys_waitid
-285 common add_key sys_add_key
-286 common request_key sys_request_key
-287 common keyctl sys_keyctl
-288 common ioprio_set sys_ioprio_set
-289 common ioprio_get sys_ioprio_get
-290 common inotify_init sys_inotify_init
-291 common inotify_add_watch sys_inotify_add_watch
-292 common inotify_rm_watch sys_inotify_rm_watch
-# 293 is unused
-294 common migrate_pages sys_migrate_pages
-295 common openat sys_openat
-296 common mkdirat sys_mkdirat
-297 common mknodat sys_mknodat
-298 common fchownat sys_fchownat
-299 common futimesat sys_futimesat_time32
-300 common fstatat64 sys_fstatat64
-301 common unlinkat sys_unlinkat
-302 common renameat sys_renameat
-303 common linkat sys_linkat
-304 common symlinkat sys_symlinkat
-305 common readlinkat sys_readlinkat
-306 common fchmodat sys_fchmodat
-307 common faccessat sys_faccessat
-308 common pselect6 sys_pselect6_time32
-309 common ppoll sys_ppoll_time32
-310 common unshare sys_unshare
-311 common set_robust_list sys_set_robust_list
-312 common get_robust_list sys_get_robust_list
-313 common splice sys_splice
-314 common sync_file_range sys_sync_file_range
-315 common tee sys_tee
-316 common vmsplice sys_vmsplice
-317 common move_pages sys_move_pages
-318 common getcpu sys_getcpu
-319 common epoll_pwait sys_epoll_pwait
-320 common utimensat sys_utimensat_time32
-321 common signalfd sys_signalfd
-322 common timerfd_create sys_timerfd_create
-323 common eventfd sys_eventfd
-324 common fallocate sys_fallocate
-325 common timerfd_settime sys_timerfd_settime32
-326 common timerfd_gettime sys_timerfd_gettime32
-327 common signalfd4 sys_signalfd4
-328 common eventfd2 sys_eventfd2
-329 common epoll_create1 sys_epoll_create1
-330 common dup3 sys_dup3
-331 common pipe2 sys_pipe2
-332 common inotify_init1 sys_inotify_init1
-333 common preadv sys_preadv
-334 common pwritev sys_pwritev
-335 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo
-336 common perf_event_open sys_perf_event_open
-337 common fanotify_init sys_fanotify_init
-338 common fanotify_mark sys_fanotify_mark
-339 common prlimit64 sys_prlimit64
-340 common socket sys_socket
-341 common bind sys_bind
-342 common connect sys_connect
-343 common listen sys_listen
-344 common accept sys_accept
-345 common getsockname sys_getsockname
-346 common getpeername sys_getpeername
-347 common socketpair sys_socketpair
-348 common send sys_send
-349 common sendto sys_sendto
-350 common recv sys_recv
-351 common recvfrom sys_recvfrom
-352 common shutdown sys_shutdown
-353 common setsockopt sys_setsockopt
-354 common getsockopt sys_getsockopt
-355 common sendmsg sys_sendmsg
-356 common recvmsg sys_recvmsg
-357 common recvmmsg sys_recvmmsg_time32
-358 common accept4 sys_accept4
-359 common name_to_handle_at sys_name_to_handle_at
-360 common open_by_handle_at sys_open_by_handle_at
-361 common clock_adjtime sys_clock_adjtime32
-362 common syncfs sys_syncfs
-363 common sendmmsg sys_sendmmsg
-364 common setns sys_setns
-365 common process_vm_readv sys_process_vm_readv
-366 common process_vm_writev sys_process_vm_writev
-367 common kcmp sys_kcmp
-368 common finit_module sys_finit_module
-369 common sched_getattr sys_sched_getattr
-370 common sched_setattr sys_sched_setattr
-371 common renameat2 sys_renameat2
-372 common seccomp sys_seccomp
-373 common getrandom sys_getrandom
-374 common memfd_create sys_memfd_create
-375 common bpf sys_bpf
-376 common execveat sys_execveat
-377 common userfaultfd sys_userfaultfd
-378 common membarrier sys_membarrier
-379 common mlock2 sys_mlock2
-380 common copy_file_range sys_copy_file_range
-381 common preadv2 sys_preadv2
-382 common pwritev2 sys_pwritev2
-383 common statx sys_statx
-384 common pkey_mprotect sys_pkey_mprotect
-385 common pkey_alloc sys_pkey_alloc
-386 common pkey_free sys_pkey_free
-387 common rseq sys_rseq
-# room for arch specific syscalls
-393 common semget sys_semget
-394 common semctl sys_semctl
-395 common shmget sys_shmget
-396 common shmctl sys_shmctl
-397 common shmat sys_shmat
-398 common shmdt sys_shmdt
-399 common msgget sys_msgget
-400 common msgsnd sys_msgsnd
-401 common msgrcv sys_msgrcv
-402 common msgctl sys_msgctl
-403 common clock_gettime64 sys_clock_gettime
-404 common clock_settime64 sys_clock_settime
-405 common clock_adjtime64 sys_clock_adjtime
-406 common clock_getres_time64 sys_clock_getres
-407 common clock_nanosleep_time64 sys_clock_nanosleep
-408 common timer_gettime64 sys_timer_gettime
-409 common timer_settime64 sys_timer_settime
-410 common timerfd_gettime64 sys_timerfd_gettime
-411 common timerfd_settime64 sys_timerfd_settime
-412 common utimensat_time64 sys_utimensat
-413 common pselect6_time64 sys_pselect6
-414 common ppoll_time64 sys_ppoll
-416 common io_pgetevents_time64 sys_io_pgetevents
-417 common recvmmsg_time64 sys_recvmmsg
-418 common mq_timedsend_time64 sys_mq_timedsend
-419 common mq_timedreceive_time64 sys_mq_timedreceive
-420 common semtimedop_time64 sys_semtimedop
-421 common rt_sigtimedwait_time64 sys_rt_sigtimedwait
-422 common futex_time64 sys_futex
-423 common sched_rr_get_interval_time64 sys_sched_rr_get_interval
-424 common pidfd_send_signal sys_pidfd_send_signal
-425 common io_uring_setup sys_io_uring_setup
-426 common io_uring_enter sys_io_uring_enter
-427 common io_uring_register sys_io_uring_register
-428 common open_tree sys_open_tree
-429 common move_mount sys_move_mount
-430 common fsopen sys_fsopen
-431 common fsconfig sys_fsconfig
-432 common fsmount sys_fsmount
-433 common fspick sys_fspick
-434 common pidfd_open sys_pidfd_open
-# 435 reserved for clone3
-436 common close_range sys_close_range
-437 common openat2 sys_openat2
-438 common pidfd_getfd sys_pidfd_getfd
-439 common faccessat2 sys_faccessat2
-440 common process_madvise sys_process_madvise
-441 common epoll_pwait2 sys_epoll_pwait2
-442 common mount_setattr sys_mount_setattr
-443 common quotactl_fd sys_quotactl_fd
-444 common landlock_create_ruleset sys_landlock_create_ruleset
-445 common landlock_add_rule sys_landlock_add_rule
-446 common landlock_restrict_self sys_landlock_restrict_self
-# 447 reserved for memfd_secret
-448 common process_mrelease sys_process_mrelease
-449 common futex_waitv sys_futex_waitv
-450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
deleted file mode 100644
index bd1a9c54476732..00000000000000
--- a/arch/sh/kernel/syscalls_32.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/syscalls.S
- *
- * System call table for SuperH
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-
-#define __SYSCALL(nr, entry) .long entry
- .data
-ENTRY(sys_call_table)
-#include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
deleted file mode 100644
index 821a09cbd6054f..00000000000000
--- a/arch/sh/kernel/time.c
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002 - 2009 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/smp.h>
-#include <linux/rtc.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/platform_early.h>
-
-static void __init sh_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- sh_early_platform_driver_register_all("earlytimer");
- sh_early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init time_init(void)
-{
- timer_probe();
-
- clk_init();
-
- late_time_init = sh_late_time_init;
-}
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
deleted file mode 100644
index 2d2a7509b565ac..00000000000000
--- a/arch/sh/kernel/topology.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/topology.c
- *
- * Copyright (C) 2007 Paul Mundt
- */
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/percpu.h>
-#include <linux/topology.h>
-#include <linux/node.h>
-#include <linux/nodemask.h>
-#include <linux/export.h>
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-cpumask_t cpu_core_map[NR_CPUS];
-EXPORT_SYMBOL(cpu_core_map);
-
-static cpumask_t cpu_coregroup_map(int cpu)
-{
- /*
- * Presently all SH-X3 SMP cores are multi-cores, so just keep it
- * simple until we have a method for determining topology..
- */
- return *cpu_possible_mask;
-}
-
-const struct cpumask *cpu_coregroup_mask(int cpu)
-{
- return &cpu_core_map[cpu];
-}
-
-int arch_update_cpu_topology(void)
-{
- unsigned int cpu;
-
- for_each_possible_cpu(cpu)
- cpu_core_map[cpu] = cpu_coregroup_map(cpu);
-
- return 0;
-}
-
-static int __init topology_init(void)
-{
- int i, ret;
-
- for_each_present_cpu(i) {
- struct cpu *c = &per_cpu(cpu_devices, i);
-
- c->hotpluggable = 1;
-
- ret = register_cpu(c, i);
- if (unlikely(ret))
- printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
- __func__, i, ret);
- }
-
-#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
- /*
- * In the UP case, make sure the CPU association is still
- * registered under each node. Without this, sysfs fails
- * to make the connection between nodes other than node0
- * and cpu0.
- */
- for_each_online_node(i)
- if (i != numa_node_id())
- register_cpu_under_node(raw_smp_processor_id(), i);
-#endif
-
- return 0;
-}
-subsys_initcall(topology_init);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
deleted file mode 100644
index 01884054aeb2bd..00000000000000
--- a/arch/sh/kernel/traps.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/kdebug.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-#include <linux/kernel.h>
-#include <linux/kexec.h>
-#include <linux/sched/signal.h>
-
-#include <linux/extable.h>
-#include <linux/module.h> /* print_modules */
-#include <asm/unwinder.h>
-#include <asm/traps.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-void __noreturn die(const char *str, struct pt_regs *regs, long err)
-{
- static int die_counter;
-
- oops_enter();
-
- spin_lock_irq(&die_lock);
- console_verbose();
- bust_spinlocks(1);
-
- printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
- print_modules();
- show_regs(regs);
-
- printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
- task_pid_nr(current), task_stack_page(current) + 1);
-
- if (!user_mode(regs) || in_interrupt())
- dump_mem("Stack: ", KERN_DEFAULT, regs->regs[15],
- THREAD_SIZE + (unsigned long)task_stack_page(current));
-
- notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
-
- bust_spinlocks(0);
- add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- spin_unlock_irq(&die_lock);
- oops_exit();
-
- if (kexec_should_crash(current))
- crash_kexec(regs);
-
- if (in_interrupt())
- panic("Fatal exception in interrupt");
-
- if (panic_on_oops)
- panic("Fatal exception");
-
- make_task_dead(SIGSEGV);
-}
-
-void die_if_kernel(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs))
- die(str, regs, err);
-}
-
-/*
- * try and fix up kernelspace address errors
- * - userspace errors just cause EFAULT to be returned, resulting in SEGV
- * - kernel/userspace interfaces cause a jump to an appropriate handler
- * - other kernel errors are bad
- */
-void die_if_no_fixup(const char *str, struct pt_regs *regs, long err)
-{
- if (!user_mode(regs)) {
- const struct exception_table_entry *fixup;
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return;
- }
-
- die(str, regs, err);
- }
-}
-
-#ifdef CONFIG_GENERIC_BUG
-static void handle_BUG(struct pt_regs *regs)
-{
- const struct bug_entry *bug;
- unsigned long bugaddr = regs->pc;
- enum bug_trap_type tt;
-
- if (!is_valid_bugaddr(bugaddr))
- goto invalid;
-
- bug = find_bug(bugaddr);
-
- /* Switch unwinders when unwind_stack() is called */
- if (bug->flags & BUGFLAG_UNWINDER)
- unwinder_faulted = 1;
-
- tt = report_bug(bugaddr, regs);
- if (tt == BUG_TRAP_TYPE_WARN) {
- regs->pc += instruction_size(bugaddr);
- return;
- }
-
-invalid:
- die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
- insn_size_t opcode;
-
- if (addr < PAGE_OFFSET)
- return 0;
- if (get_kernel_nofault(opcode, (insn_size_t *)addr))
- return 0;
- if (opcode == TRAPA_BUG_OPCODE)
- return 1;
-
- return 0;
-}
-#endif
-
-/*
- * Generic trap handler.
- */
-BUILD_TRAP_HANDLER(debug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
- force_sig(SIGTRAP);
-}
-
-/*
- * Special handler for BUG() traps.
- */
-BUILD_TRAP_HANDLER(bug)
-{
- TRAP_HANDLER_DECL;
-
- /* Rewind */
- regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-
- if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
- SIGTRAP) == NOTIFY_STOP)
- return;
-
-#ifdef CONFIG_GENERIC_BUG
- if (__kernel_text_address(instruction_pointer(regs))) {
- insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
- if (insn == TRAPA_BUG_OPCODE)
- handle_BUG(regs);
- return;
- }
-#endif
-
- force_sig(SIGTRAP);
-}
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern void arch_ftrace_nmi_enter(void);
-extern void arch_ftrace_nmi_exit(void);
-#else
-static inline void arch_ftrace_nmi_enter(void) { }
-static inline void arch_ftrace_nmi_exit(void) { }
-#endif
-
-BUILD_TRAP_HANDLER(nmi)
-{
- TRAP_HANDLER_DECL;
-
- arch_ftrace_nmi_enter();
-
- nmi_enter();
- this_cpu_inc(irq_stat.__nmi_count);
-
- switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
- case NOTIFY_OK:
- case NOTIFY_STOP:
- break;
- case NOTIFY_BAD:
- die("Fatal Non-Maskable Interrupt", regs, SIGINT);
- default:
- printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
- break;
- }
-
- nmi_exit();
-
- arch_ftrace_nmi_exit();
-}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
deleted file mode 100644
index 6cdda3a621a1e5..00000000000000
--- a/arch/sh/kernel/traps_32.c
+++ /dev/null
@@ -1,795 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * 'traps.c' handles hardware traps and faults after we have saved some
- * state in 'entry.S'.
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf
- * Copyright (C) 2000 David Howells
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/kallsyms.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-#include <linux/debug_locks.h>
-#include <linux/kdebug.h>
-#include <linux/limits.h>
-#include <linux/sysfs.h>
-#include <linux/uaccess.h>
-#include <linux/perf_event.h>
-#include <linux/sched/task_stack.h>
-
-#include <asm/alignment.h>
-#include <asm/fpu.h>
-#include <asm/kprobes.h>
-#include <asm/traps.h>
-#include <asm/bl_bit.h>
-
-#ifdef CONFIG_CPU_SH2
-# define TRAP_RESERVED_INST 4
-# define TRAP_ILLEGAL_SLOT_INST 6
-# define TRAP_ADDRESS_ERROR 9
-# ifdef CONFIG_CPU_SH2A
-# define TRAP_UBC 12
-# define TRAP_FPU_ERROR 13
-# define TRAP_DIVZERO_ERROR 17
-# define TRAP_DIVOVF_ERROR 18
-# endif
-#else
-#define TRAP_RESERVED_INST 12
-#define TRAP_ILLEGAL_SLOT_INST 13
-#endif
-
-static inline void sign_extend(unsigned int count, unsigned char *dst)
-{
-#ifdef __LITTLE_ENDIAN__
- if ((count == 1) && dst[0] & 0x80) {
- dst[1] = 0xff;
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
- if ((count == 2) && dst[1] & 0x80) {
- dst[2] = 0xff;
- dst[3] = 0xff;
- }
-#else
- if ((count == 1) && dst[3] & 0x80) {
- dst[2] = 0xff;
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
- if ((count == 2) && dst[2] & 0x80) {
- dst[1] = 0xff;
- dst[0] = 0xff;
- }
-#endif
-}
-
-static struct mem_access user_mem_access = {
- copy_from_user,
- copy_to_user,
-};
-
-static unsigned long copy_from_kernel_wrapper(void *dst, const void __user *src,
- unsigned long cnt)
-{
- return copy_from_kernel_nofault(dst, (const void __force *)src, cnt);
-}
-
-static unsigned long copy_to_kernel_wrapper(void __user *dst, const void *src,
- unsigned long cnt)
-{
- return copy_to_kernel_nofault((void __force *)dst, src, cnt);
-}
-
-static struct mem_access kernel_mem_access = {
- copy_from_kernel_wrapper,
- copy_to_kernel_wrapper,
-};
-
-/*
- * handle an instruction that does an unaligned memory access by emulating the
- * desired behaviour
- * - note that PC _may not_ point to the faulting instruction
- * (if that instruction is in a branch delay slot)
- * - return 0 if emulation okay, -EFAULT on existential error
- */
-static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma)
-{
- int ret, index, count;
- unsigned long *rm, *rn;
- unsigned char *src, *dst;
- unsigned char __user *srcu, *dstu;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rn = ®s->regs[index];
-
- index = (instruction>>4)&15; /* 0x00F0 */
- rm = ®s->regs[index];
-
- count = 1<<(instruction&3);
-
- switch (count) {
- case 1: inc_unaligned_byte_access(); break;
- case 2: inc_unaligned_word_access(); break;
- case 4: inc_unaligned_dword_access(); break;
- case 8: inc_unaligned_multi_access(); break;
- }
-
- ret = -EFAULT;
- switch (instruction>>12) {
- case 0: /* mov.[bwl] to/from memory via r0+rn */
- if (instruction & 8) {
- /* from memory */
- srcu = (unsigned char __user *)*rm;
- srcu += regs->regs[0];
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
-
- sign_extend(count, dst);
- } else {
- /* to memory */
- src = (unsigned char *)rm;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- dstu = (unsigned char __user *)*rn;
- dstu += regs->regs[0];
-
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- }
- ret = 0;
- break;
-
- case 1: /* mov.l Rm,@(disp,Rn) */
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
- dstu += (instruction&0x000F)<<2;
-
- if (ma->to(dstu, src, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 2: /* mov.[bwl] to memory, possibly with pre-decrement */
- if (instruction & 4)
- *rn -= count;
- src = (unsigned char*) rm;
- dstu = (unsigned char __user *)*rn;
-#if !defined(__LITTLE_ENDIAN__)
- src += 4-count;
-#endif
- if (ma->to(dstu, src, count))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 5: /* mov.l @(disp,Rm),Rn */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 6: /* mov.[bwl] from memory, possibly with post-increment */
- srcu = (unsigned char __user *)*rm;
- if (instruction & 4)
- *rm += count;
- dst = (unsigned char*) rn;
- *(unsigned long*)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 4-count;
-#endif
- if (ma->from(dst, srcu, count))
- goto fetch_fault;
- sign_extend(count, dst);
- ret = 0;
- break;
-
- case 8:
- switch ((instruction&0xFF00)>>8) {
- case 0x81: /* mov.w R0,@(disp,Rn) */
- src = (unsigned char *) ®s->regs[0];
-#if !defined(__LITTLE_ENDIAN__)
- src += 2;
-#endif
- dstu = (unsigned char __user *)*rm; /* called Rn in the spec */
- dstu += (instruction & 0x000F) << 1;
-
- if (ma->to(dstu, src, 2))
- goto fetch_fault;
- ret = 0;
- break;
-
- case 0x85: /* mov.w @(disp,Rm),R0 */
- srcu = (unsigned char __user *)*rm;
- srcu += (instruction & 0x000F) << 1;
- dst = (unsigned char *) ®s->regs[0];
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
- }
- break;
-
- case 9: /* mov.w @(disp,PC),Rn */
- srcu = (unsigned char __user *)regs->pc;
- srcu += 4;
- srcu += (instruction & 0x00FF) << 1;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
-#if !defined(__LITTLE_ENDIAN__)
- dst += 2;
-#endif
-
- if (ma->from(dst, srcu, 2))
- goto fetch_fault;
- sign_extend(2, dst);
- ret = 0;
- break;
-
- case 0xd: /* mov.l @(disp,PC),Rn */
- srcu = (unsigned char __user *)(regs->pc & ~0x3);
- srcu += 4;
- srcu += (instruction & 0x00FF) << 2;
- dst = (unsigned char *)rn;
- *(unsigned long *)dst = 0;
-
- if (ma->from(dst, srcu, 4))
- goto fetch_fault;
- ret = 0;
- break;
- }
- return ret;
-
- fetch_fault:
- /* Argh. Address not only misaligned but also non-existent.
- * Raise an EFAULT and see if it's trapped
- */
- die_if_no_fixup("Fault in unaligned fixup", regs, 0);
- return -EFAULT;
-}
-
-/*
- * emulate the instruction in the delay slot
- * - fetches the instruction from PC+2
- */
-static inline int handle_delayslot(struct pt_regs *regs,
- insn_size_t old_instruction,
- struct mem_access *ma)
-{
- insn_size_t instruction;
- void __user *addr = (void __user *)(regs->pc +
- instruction_size(old_instruction));
-
- if (copy_from_user(&instruction, addr, sizeof(instruction))) {
- /* the instruction-fetch faulted */
- if (user_mode(regs))
- return -EFAULT;
-
- /* kernel */
- die("delay-slot-insn faulting in handle_unaligned_delayslot",
- regs, 0);
- }
-
- return handle_unaligned_ins(instruction, regs, ma);
-}
-
-/*
- * handle an instruction that does an unaligned memory access
- * - have to be careful of branch delay-slot instructions that fault
- * SH3:
- * - if the branch would be taken PC points to the branch
- * - if the branch would not be taken, PC points to delay-slot
- * SH4:
- * - PC always points to delayed branch
- * - return 0 if handled, -EFAULT if failed (may not return if in kernel)
- */
-
-/* Macros to determine offset from current PC for branch instructions */
-/* Explicit type coercion is used to force sign extension where needed */
-#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
-#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
-
-int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
- struct mem_access *ma, int expected,
- unsigned long address)
-{
- u_int rm;
- int ret, index;
-
- /*
- * XXX: We can't handle mixed 16/32-bit instructions yet
- */
- if (instruction_size(instruction) != 2)
- return -EINVAL;
-
- index = (instruction>>8)&15; /* 0x0F00 */
- rm = regs->regs[index];
-
- /*
- * Log the unexpected fixups, and then pass them on to perf.
- *
- * We intentionally don't report the expected cases to perf as
- * otherwise the trapped I/O case will skew the results too much
- * to be useful.
- */
- if (!expected) {
- unaligned_fixups_notify(current, instruction, regs);
- perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1,
- regs, address);
- }
-
- ret = -EFAULT;
- switch (instruction&0xF000) {
- case 0x0000:
- if (instruction==0x000B) {
- /* rts */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = regs->pr;
- }
- else if ((instruction&0x00FF)==0x0023) {
- /* braf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += rm + 4;
- }
- else if ((instruction&0x00FF)==0x0003) {
- /* bsrf @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += rm + 4;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x1000: /* mov.l Rm,@(disp,Rn) */
- goto simple;
-
- case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */
- goto simple;
-
- case 0x4000:
- if ((instruction&0x00FF)==0x002B) {
- /* jmp @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc = rm;
- }
- else if ((instruction&0x00FF)==0x000B) {
- /* jsr @Rm */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc = rm;
- }
- }
- else {
- /* mov.[bwl] to/from memory via r0+rn */
- goto simple;
- }
- break;
-
- case 0x5000: /* mov.l @(disp,Rm),Rn */
- goto simple;
-
- case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */
- goto simple;
-
- case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */
- switch (instruction&0x0F00) {
- case 0x0100: /* mov.w R0,@(disp,Rm) */
- goto simple;
- case 0x0500: /* mov.w @(disp,Rm),R0 */
- goto simple;
- case 0x0B00: /* bf lab - no delayslot*/
- ret = 0;
- break;
- case 0x0F00: /* bf/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) != 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- case 0x0900: /* bt lab - no delayslot */
- ret = 0;
- break;
- case 0x0D00: /* bt/s lab */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
- if ((regs->sr & 0x00000001) == 0)
- regs->pc += 4; /* next after slot */
- else
-#endif
- regs->pc += SH_PC_8BIT_OFFSET(instruction);
- }
- break;
- }
- break;
-
- case 0x9000: /* mov.w @(disp,Rm),Rn */
- goto simple;
-
- case 0xA000: /* bra label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0)
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- break;
-
- case 0xB000: /* bsr label */
- ret = handle_delayslot(regs, instruction, ma);
- if (ret==0) {
- regs->pr = regs->pc + 4;
- regs->pc += SH_PC_12BIT_OFFSET(instruction);
- }
- break;
-
- case 0xD000: /* mov.l @(disp,Rm),Rn */
- goto simple;
- }
- return ret;
-
- /* handle non-delay-slot instruction */
- simple:
- ret = handle_unaligned_ins(instruction, regs, ma);
- if (ret==0)
- regs->pc += instruction_size(instruction);
- return ret;
-}
-
-/*
- * Handle various address error exceptions:
- * - instruction address error:
- * misaligned PC
- * PC >= 0x80000000 in user mode
- * - data address error (read and write)
- * misaligned data access
- * access to >= 0x80000000 is user mode
- * Unfortuntaly we can't distinguish between instruction address error
- * and data address errors caused by read accesses.
- */
-asmlinkage void do_address_error(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
- unsigned long error_code = 0;
- insn_size_t instruction;
- int tmp;
-
- /* Intentional ifdef */
-#ifdef CONFIG_CPU_HAS_SR_RB
- error_code = lookup_exception_vector();
-#endif
-
- if (user_mode(regs)) {
- int si_code = BUS_ADRERR;
- unsigned int user_action;
-
- local_irq_enable();
- inc_unaligned_user_access();
-
- if (copy_from_user(&instruction, (insn_size_t __user *)(regs->pc & ~1),
- sizeof(instruction))) {
- goto uspace_segv;
- }
-
- /* shout about userspace fixups */
- unaligned_fixups_notify(current, instruction, regs);
-
- user_action = unaligned_user_action();
- if (user_action & UM_FIXUP)
- goto fixup;
- if (user_action & UM_SIGNAL)
- goto uspace_segv;
- else {
- /* ignore */
- regs->pc += instruction_size(instruction);
- return;
- }
-
-fixup:
- /* bad PC is not something we can fix */
- if (regs->pc & 1) {
- si_code = BUS_ADRALN;
- goto uspace_segv;
- }
-
- tmp = handle_unaligned_access(instruction, regs,
- &user_mem_access, 0,
- address);
-
- if (tmp == 0)
- return; /* sorted */
-uspace_segv:
- printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
- "access (PC %lx PR %lx)\n", current->comm, regs->pc,
- regs->pr);
-
- force_sig_fault(SIGBUS, si_code, (void __user *)address);
- } else {
- inc_unaligned_kernel_access();
-
- if (regs->pc & 1)
- die("unaligned program counter", regs, error_code);
-
- if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
- sizeof(instruction))) {
- /* Argh. Fault on the instruction itself.
- This should never happen non-SMP
- */
- die("insn faulting in do_address_error", regs, 0);
- }
-
- unaligned_fixups_notify(current, instruction, regs);
-
- handle_unaligned_access(instruction, regs, &kernel_mem_access,
- 0, address);
- }
-}
-
-#ifdef CONFIG_SH_DSP
-/*
- * SH-DSP support gerg@snapgear.com.
- */
-int is_dsp_inst(struct pt_regs *regs)
-{
- unsigned short inst = 0;
-
- /*
- * Safe guard if DSP mode is already enabled or we're lacking
- * the DSP altogether.
- */
- if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP))
- return 0;
-
- get_user(inst, ((unsigned short *) regs->pc));
-
- inst &= 0xf000;
-
- /* Check for any type of DSP or support instruction */
- if ((inst == 0xf000) || (inst == 0x4000))
- return 1;
-
- return 0;
-}
-#else
-#define is_dsp_inst(regs) (0)
-#endif /* CONFIG_SH_DSP */
-
-#ifdef CONFIG_CPU_SH2A
-asmlinkage void do_divide_error(unsigned long r4)
-{
- int code;
-
- switch (r4) {
- case TRAP_DIVZERO_ERROR:
- code = FPE_INTDIV;
- break;
- case TRAP_DIVOVF_ERROR:
- code = FPE_INTOVF;
- break;
- default:
- /* Let gcc know unhandled cases don't make it past here */
- return;
- }
- force_sig_fault(SIGFPE, code, NULL);
-}
-#endif
-
-asmlinkage void do_reserved_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long error_code;
-
-#ifdef CONFIG_SH_FPU_EMU
- unsigned short inst = 0;
- int err;
-
- get_user(inst, (unsigned short __user *)regs->pc);
-
- err = do_fpu_inst(inst, regs);
- if (!err) {
- regs->pc += instruction_size(inst);
- return;
- }
- /* not a FPU inst. */
-#endif
-
-#ifdef CONFIG_SH_DSP
- /* Check if it's a DSP instruction */
- if (is_dsp_inst(regs)) {
- /* Enable DSP mode, and restart instruction. */
- regs->sr |= SR_DSP;
- /* Save DSP mode */
- current->thread.dsp_status.status |= SR_DSP;
- return;
- }
-#endif
-
- error_code = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("reserved instruction", regs, error_code);
-}
-
-#ifdef CONFIG_SH_FPU_EMU
-static int emulate_branch(unsigned short inst, struct pt_regs *regs)
-{
- /*
- * bfs: 8fxx: PC+=d*2+4;
- * bts: 8dxx: PC+=d*2+4;
- * bra: axxx: PC+=D*2+4;
- * bsr: bxxx: PC+=D*2+4 after PR=PC+4;
- * braf:0x23: PC+=Rn*2+4;
- * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
- * jmp: 4x2b: PC=Rn;
- * jsr: 4x0b: PC=Rn after PR=PC+4;
- * rts: 000b: PC=PR;
- */
- if (((inst & 0xf000) == 0xb000) || /* bsr */
- ((inst & 0xf0ff) == 0x0003) || /* bsrf */
- ((inst & 0xf0ff) == 0x400b)) /* jsr */
- regs->pr = regs->pc + 4;
-
- if ((inst & 0xfd00) == 0x8d00) { /* bfs, bts */
- regs->pc += SH_PC_8BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xe000) == 0xa000) { /* bra, bsr */
- regs->pc += SH_PC_12BIT_OFFSET(inst);
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x0003) { /* braf, bsrf */
- regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
- return 0;
- }
-
- if ((inst & 0xf0df) == 0x400b) { /* jmp, jsr */
- regs->pc = regs->regs[(inst & 0x0f00) >> 8];
- return 0;
- }
-
- if ((inst & 0xffff) == 0x000b) { /* rts */
- regs->pc = regs->pr;
- return 0;
- }
-
- return 1;
-}
-#endif
-
-asmlinkage void do_illegal_slot_inst(void)
-{
- struct pt_regs *regs = current_pt_regs();
- unsigned long inst;
-
- if (kprobe_handle_illslot(regs->pc) == 0)
- return;
-
-#ifdef CONFIG_SH_FPU_EMU
- get_user(inst, (unsigned short __user *)regs->pc + 1);
- if (!do_fpu_inst(inst, regs)) {
- get_user(inst, (unsigned short __user *)regs->pc);
- if (!emulate_branch(inst, regs))
- return;
- /* fault in branch.*/
- }
- /* not a FPU inst. */
-#endif
-
- inst = lookup_exception_vector();
-
- local_irq_enable();
- force_sig(SIGILL);
- die_if_no_fixup("illegal slot instruction", regs, inst);
-}
-
-asmlinkage void do_exception_error(void)
-{
- long ex;
-
- ex = lookup_exception_vector();
- die_if_kernel("exception", current_pt_regs(), ex);
-}
-
-void per_cpu_trap_init(void)
-{
- extern void *vbr_base;
-
- /* NOTE: The VBR value should be at P1
- (or P2, virtural "fixed" address space).
- It's definitely should not in physical address. */
-
- asm volatile("ldc %0, vbr"
- : /* no output */
- : "r" (&vbr_base)
- : "memory");
-
- /* disable exception blocking now when the vbr has been setup */
- clear_bl_bit();
-}
-
-void *set_exception_table_vec(unsigned int vec, void *handler)
-{
- extern void *exception_handling_table[];
- void *old_handler;
-
- old_handler = exception_handling_table[vec];
- exception_handling_table[vec] = handler;
- return old_handler;
-}
-
-void __init trap_init(void)
-{
- set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst);
- set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
- defined(CONFIG_SH_FPU_EMU)
- /*
- * For SH-4 lacking an FPU, treat floating point instructions as
- * reserved. They'll be handled in the math-emu case, or faulted on
- * otherwise.
- */
- set_exception_table_evt(0x800, do_reserved_inst);
- set_exception_table_evt(0x820, do_illegal_slot_inst);
-#elif defined(CONFIG_SH_FPU)
- set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
- set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
-#endif
-
-#ifdef CONFIG_CPU_SH2
- set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
-#endif
-#ifdef CONFIG_CPU_SH2A
- set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
- set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
-#ifdef CONFIG_SH_FPU
- set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
-#endif
-#endif
-
-#ifdef TRAP_UBC
- set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
-#endif
-}
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
deleted file mode 100644
index 7a54b72dd92377..00000000000000
--- a/arch/sh/kernel/unwinder.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2009 Matt Fleming
- *
- * Based, in part, on kernel/time/clocksource.c.
- *
- * This file provides arbitration code for stack unwinders.
- *
- * Multiple stack unwinders can be available on a system, usually with
- * the most accurate unwinder being the currently active one.
- */
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/unwinder.h>
-#include <linux/atomic.h>
-
-/*
- * This is the most basic stack unwinder an architecture can
- * provide. For architectures without reliable frame pointers, e.g.
- * RISC CPUs, it can be implemented by looking through the stack for
- * addresses that lie within the kernel text section.
- *
- * Other CPUs, e.g. x86, can use their frame pointer register to
- * construct more accurate stack traces.
- */
-static struct list_head unwinder_list;
-static struct unwinder stack_reader = {
- .name = "stack-reader",
- .dump = stack_reader_dump,
- .rating = 50,
- .list = {
- .next = &unwinder_list,
- .prev = &unwinder_list,
- },
-};
-
-/*
- * "curr_unwinder" points to the stack unwinder currently in use. This
- * is the unwinder with the highest rating.
- *
- * "unwinder_list" is a linked-list of all available unwinders, sorted
- * by rating.
- *
- * All modifications of "curr_unwinder" and "unwinder_list" must be
- * performed whilst holding "unwinder_lock".
- */
-static struct unwinder *curr_unwinder = &stack_reader;
-
-static struct list_head unwinder_list = {
- .next = &stack_reader.list,
- .prev = &stack_reader.list,
-};
-
-static DEFINE_SPINLOCK(unwinder_lock);
-
-/**
- * select_unwinder - Select the best registered stack unwinder.
- *
- * Private function. Must hold unwinder_lock when called.
- *
- * Select the stack unwinder with the best rating. This is useful for
- * setting up curr_unwinder.
- */
-static struct unwinder *select_unwinder(void)
-{
- struct unwinder *best;
-
- if (list_empty(&unwinder_list))
- return NULL;
-
- best = list_entry(unwinder_list.next, struct unwinder, list);
- if (best == curr_unwinder)
- return NULL;
-
- return best;
-}
-
-/*
- * Enqueue the stack unwinder sorted by rating.
- */
-static int unwinder_enqueue(struct unwinder *ops)
-{
- struct list_head *tmp, *entry = &unwinder_list;
-
- list_for_each(tmp, &unwinder_list) {
- struct unwinder *o;
-
- o = list_entry(tmp, struct unwinder, list);
- if (o == ops)
- return -EBUSY;
- /* Keep track of the place, where to insert */
- if (o->rating >= ops->rating)
- entry = tmp;
- }
- list_add(&ops->list, entry);
-
- return 0;
-}
-
-/**
- * unwinder_register - Used to install new stack unwinder
- * @u: unwinder to be registered
- *
- * Install the new stack unwinder on the unwinder list, which is sorted
- * by rating.
- *
- * Returns -EBUSY if registration fails, zero otherwise.
- */
-int unwinder_register(struct unwinder *u)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&unwinder_lock, flags);
- ret = unwinder_enqueue(u);
- if (!ret)
- curr_unwinder = select_unwinder();
- spin_unlock_irqrestore(&unwinder_lock, flags);
-
- return ret;
-}
-
-int unwinder_faulted = 0;
-
-/*
- * Unwind the call stack and pass information to the stacktrace_ops
- * functions. Also handle the case where we need to switch to a new
- * stack dumper because the current one faulted unexpectedly.
- */
-void unwind_stack(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, const struct stacktrace_ops *ops,
- void *data)
-{
- unsigned long flags;
-
- /*
- * The problem with unwinders with high ratings is that they are
- * inherently more complicated than the simple ones with lower
- * ratings. We are therefore more likely to fault in the
- * complicated ones, e.g. hitting BUG()s. If we fault in the
- * code for the current stack unwinder we try to downgrade to
- * one with a lower rating.
- *
- * Hopefully this will give us a semi-reliable stacktrace so we
- * can diagnose why curr_unwinder->dump() faulted.
- */
- if (unwinder_faulted) {
- spin_lock_irqsave(&unwinder_lock, flags);
-
- /* Make sure no one beat us to changing the unwinder */
- if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
- list_del(&curr_unwinder->list);
- curr_unwinder = select_unwinder();
-
- unwinder_faulted = 0;
- }
-
- spin_unlock_irqrestore(&unwinder_lock, flags);
- }
-
- curr_unwinder->dump(task, regs, sp, ops, data);
-}
-EXPORT_SYMBOL_GPL(unwind_stack);
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
deleted file mode 100644
index 3161b9ccd2a570..00000000000000
--- a/arch/sh/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ld script to make SuperH Linux kernel
- * Written by Niibe Yutaka and Paul Mundt
- */
-OUTPUT_ARCH(sh)
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm/vmlinux.lds.h>
-
-#ifdef CONFIG_PMB
- #define MEMORY_OFFSET 0
-#else
- #define MEMORY_OFFSET __MEMORY_START
-#endif
-
-ENTRY(_start)
-SECTIONS
-{
- . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-
- _text = .; /* Text and read-only data */
-
- .empty_zero_page : AT(ADDR(.empty_zero_page)) {
- *(.empty_zero_page)
- } = 0
-
- .text : AT(ADDR(.text)) {
- HEAD_TEXT
- TEXT_TEXT
- SCHED_TEXT
- CPUIDLE_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- SOFTIRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } = 0x0009
-
- EXCEPTION_TABLE(16)
-
- _sdata = .;
- RO_DATA(PAGE_SIZE)
- RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
- _edata = .;
-
- DWARF_EH_FRAME
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- INIT_TEXT_SECTION(PAGE_SIZE)
- INIT_DATA_SECTION(16)
-
- . = ALIGN(4);
- .machvec.init : AT(ADDR(.machvec.init)) {
- __machvec_start = .;
- *(.machvec.init)
- __machvec_end = .;
- }
-
- PERCPU_SECTION(L1_CACHE_BYTES)
-
- /*
- * .exit.text is discarded at runtime, not link time, to deal with
- * references from __bug_table
- */
- .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
- .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
- BSS_SECTION(0, PAGE_SIZE, 4)
- _end = . ;
-
- STABS_DEBUG
- DWARF_DEBUG
- ELF_DETAILS
-
- DISCARDS
-}
diff --git a/arch/sh/kernel/vsyscall/.gitignore b/arch/sh/kernel/vsyscall/.gitignore
deleted file mode 100644
index 530a3031a88d79..00000000000000
--- a/arch/sh/kernel/vsyscall/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vsyscall.lds
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
deleted file mode 100644
index 6e86644480488f..00000000000000
--- a/arch/sh/kernel/vsyscall/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-y += vsyscall.o vsyscall-syscall.o vsyscall-syms.o
-
-$(obj)/vsyscall-syscall.o: \
- $(foreach F,trapa,$(obj)/vsyscall-$F.so)
-
-# Teach kbuild about targets
-targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall-note.o vsyscall.lds vsyscall-dummy.o
-
-# The DSO images are built using a special linker script
-quiet_cmd_syscall = SYSCALL $@
- cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall.lds += -P -C -Ush
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 -Wl,--hash-style=sysv
-
-SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
-
-$(obj)/vsyscall-trapa.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
- $(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-SYSCFLAGS_vsyscall-dummy.o = -r
-$(obj)/vsyscall-dummy.o: $(src)/vsyscall.lds \
- $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
- $(call if_changed,syscall)
-
-LDFLAGS_vsyscall-syms.o := -r -R
-$(obj)/vsyscall-syms.o: $(obj)/vsyscall-dummy.o FORCE
- $(call if_changed,ld)
diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S
deleted file mode 100644
index bb350918bebd19..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-note.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
- * Here we can supply some information useful to userland.
- */
-
-#include <linux/uts.h>
-#include <linux/version.h>
-
-#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \
- .section name, flags; \
- .balign 4; \
- .long 1f - 0f; /* name length */ \
- .long 3f - 2f; /* data length */ \
- .long type; /* note type */ \
-0: .asciz vendor; /* vendor name */ \
-1: .balign 4; \
-2:
-
-#define ASM_ELF_NOTE_END \
-3: .balign 4; /* pad out section */ \
- .previous
-
- ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
- .long LINUX_VERSION_CODE
- ASM_ELF_NOTE_END
diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
deleted file mode 100644
index bece5fa7361830..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/unistd.h>
-
- .text
- .balign 32
- .globl __kernel_sigreturn
- .type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_sigreturn
-.LEND_sigreturn:
- .size __kernel_sigreturn,.-.LSTART_sigreturn
-
- .balign 32
- .globl __kernel_rt_sigreturn
- .type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
- mov.w 1f, r3
- trapa #0x10
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
- or r0, r0
-
-1: .short __NR_rt_sigreturn
-.LEND_rt_sigreturn:
- .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE1:
- .ualong .LCIE1_end - .LCIE1_start
-.LCIE1_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zRS" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc, 0xf, 0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
-
- .align 2
-.LCIE1_end:
-
- .ualong .LFDE0_end-.LFDE0_start /* Length FDE0 */
-.LFDE0_start:
- .ualong .LFDE0_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_sigreturn-. /* PC-relative start address */
- .ualong .LEND_sigreturn-.LSTART_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE0_end:
-
- .ualong .LFDE1_end-.LFDE1_start /* Length FDE1 */
-.LFDE1_start:
- .ualong .LFDE1_start-.LCIE1 /* CIE pointer */
- .ualong .LSTART_rt_sigreturn-. /* PC-relative start address */
- .ualong .LEND_rt_sigreturn-.LSTART_rt_sigreturn
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE1_end:
-
- .previous
diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
deleted file mode 100644
index 2aeaa2ddee50eb..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-syscall.S
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/init.h>
-
-__INITDATA
-
- .globl vsyscall_trapa_start, vsyscall_trapa_end
-vsyscall_trapa_start:
- .incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
-vsyscall_trapa_end:
-
-__FINIT
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
deleted file mode 100644
index 854ea323570415..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
- .text
- .globl __kernel_vsyscall
- .type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
- trapa #0x10
- nop
-.LEND_vsyscall:
- .size __kernel_vsyscall,.-.LSTART_vsyscall
- .previous
-
- .section .eh_frame,"a",@progbits
-.LCIE:
- .ualong .LCIE_end - .LCIE_start
-.LCIE_start:
- .ualong 0 /* CIE ID */
- .byte 0x1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
- .uleb128 0x1 /* Code alignment factor */
- .sleb128 -4 /* Data alignment factor */
- .byte 0x11 /* Return address register column */
- .uleb128 0x1 /* Augmentation length and data */
- .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
- .byte 0xc,0xf,0x0 /* DW_CFA_def_cfa: r15 ofs 0 */
- .align 2
-.LCIE_end:
-
- .ualong .LFDE_end-.LFDE_start /* Length FDE */
-.LFDE_start:
- .ualong .LFDE_start-.LCIE /* CIE pointer */
- .ualong .LSTART_vsyscall-. /* PC-relative start address */
- .ualong .LEND_vsyscall-.LSTART_vsyscall
- .uleb128 0 /* Augmentation */
- .align 2
-.LFDE_end:
- .previous
-
-/* Get the common code for the sigreturn entry points */
-#include "vsyscall-sigreturn.S"
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
deleted file mode 100644
index 1bd85a6949c45d..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/vsyscall/vsyscall.c
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * vDSO randomization
- * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
- */
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/elf.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-
-/*
- * Should the kernel map a VDSO page into processes and pass its
- * address down to glibc upon exec()?
- */
-unsigned int __read_mostly vdso_enabled = 1;
-EXPORT_SYMBOL_GPL(vdso_enabled);
-
-static int __init vdso_setup(char *s)
-{
- vdso_enabled = simple_strtoul(s, NULL, 0);
- return 1;
-}
-__setup("vdso=", vdso_setup);
-
-/*
- * These symbols are defined by vsyscall.o to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vsyscall_trapa_start, vsyscall_trapa_end;
-static struct page *syscall_pages[1];
-
-int __init vsyscall_init(void)
-{
- void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
- syscall_pages[0] = virt_to_page(syscall_page);
-
- /*
- * XXX: Map this page to a fixmap entry if we get around
- * to adding the page to ELF core dumps
- */
-
- memcpy(syscall_page,
- &vsyscall_trapa_start,
- &vsyscall_trapa_end - &vsyscall_trapa_start);
-
- return 0;
-}
-
-/* Setup a VMA at program startup for the vsyscall page */
-int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
-{
- struct mm_struct *mm = current->mm;
- unsigned long addr;
- int ret;
-
- if (mmap_write_lock_killable(mm))
- return -EINTR;
-
- addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
- if (IS_ERR_VALUE(addr)) {
- ret = addr;
- goto up_fail;
- }
-
- ret = install_special_mapping(mm, addr, PAGE_SIZE,
- VM_READ | VM_EXEC |
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
- syscall_pages);
- if (unlikely(ret))
- goto up_fail;
-
- current->mm->context.vdso = (void *)addr;
-
-up_fail:
- mmap_write_unlock(mm);
- return ret;
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
- if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
- return "[vdso]";
-
- return NULL;
-}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
deleted file mode 100644
index e3582e03c0eb0b..00000000000000
--- a/arch/sh/kernel/vsyscall/vsyscall.lds.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
- * object prelinked to its virtual address, and with only one read-only
- * segment (that fits in one page). This script controls its layout.
- */
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-#else
-OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
-#endif
-OUTPUT_ARCH(sh)
-
-/* The ELF entry point can be used to set the AT_SYSINFO value. */
-ENTRY(__kernel_vsyscall);
-
-SECTIONS
-{
- . = SIZEOF_HEADERS;
-
- .hash : { *(.hash) } :text
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- /*
- * This linker script is used both with -r and with -shared.
- * For the layouts to match, we need to skip more than enough
- * space for the dynamic symbol table et al. If this amount
- * is insufficient, ld -shared will barf. Just increase it here.
- */
- . = 0x400;
-
- .text : { *(.text) } :text =0x90909090
- .note : { *(.note.*) } :text :note
- .eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : {
- KEEP (*(.eh_frame))
- LONG (0)
- } :text
- .dynamic : { *(.dynamic) } :text :dynamic
- .useless : {
- *(.got.plt) *(.got)
- *(.data .data.* .gnu.linkonce.d.*)
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- } :text
-}
-
-/*
- * Very old versions of ld do not recognize this name token; use the constant.
- */
-#define PT_GNU_EH_FRAME 0x6474e550
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
- text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
- dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
- note PT_NOTE FLAGS(4); /* PF_R */
- eh_frame_hdr PT_GNU_EH_FRAME;
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
- LINUX_2.6 {
- global:
- __kernel_vsyscall;
- __kernel_sigreturn;
- __kernel_rt_sigreturn;
-
- local: *;
- };
-}
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
deleted file mode 100644
index eb473d373ca43a..00000000000000
--- a/arch/sh/lib/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for SuperH-specific library files..
-#
-
-lib-y = delay.o memmove.o memchr.o \
- checksum.o strlen.o div64.o div64-generic.o
-
-# Extracted from libgcc
-obj-y += movmem.o ashldi3.o ashrdi3.o lshrdi3.o \
- ashlsi3.o ashrsi3.o ashiftrt.o lshrsi3.o \
- udiv_qrnnd.o
-
-udivsi3-y := udivsi3_i4i-Os.o
-
-ifneq ($(CONFIG_CC_OPTIMIZE_FOR_SIZE),y)
-udivsi3-$(CONFIG_CPU_SH3) := udivsi3_i4i.o
-udivsi3-$(CONFIG_CPU_SH4) := udivsi3_i4i.o
-endif
-udivsi3-y += udivsi3.o
-
-obj-y += io.o
-
-memcpy-y := memcpy.o
-memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o
-
-memset-y := memset.o
-memset-$(CONFIG_CPU_SH4) := memset-sh4.o
-
-lib-$(CONFIG_MMU) += copy_page.o __clear_user.o
-lib-$(CONFIG_MCOUNT) += mcount.o
-lib-y += $(memcpy-y) $(memset-y) $(udivsi3-y)
diff --git a/arch/sh/lib/__clear_user.S b/arch/sh/lib/__clear_user.S
deleted file mode 100644
index 0978606907ed3c..00000000000000
--- a/arch/sh/lib/__clear_user.S
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * __clear_user_page, __clear_user, clear_page implementation of SuperH
- *
- * Copyright (C) 2001 Kaz Kojima
- * Copyright (C) 2001, 2002 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-ENTRY(__clear_user)
- !
- mov #0, r0
- mov #0xffffffe0, r1
- !
- ! r4..(r4+31)&~32 -------- not aligned [ Area 0 ]
- ! (r4+31)&~32..(r4+r5)&~32 -------- aligned [ Area 1 ]
- ! (r4+r5)&~32..r4+r5 -------- not aligned [ Area 2 ]
- !
- ! Clear area 0
- mov r4, r2
- !
- tst r1, r5 ! length < 32
- bt .Larea2 ! skip to remainder
- !
- add #31, r2
- and r1, r2
- cmp/eq r4, r2
- bt .Larea1
- mov r2, r3
- sub r4, r3
- mov r3, r7
- mov r4, r2
- !
-.L0: dt r3
-0: mov.b r0, @r2
- bf/s .L0
- add #1, r2
- !
- sub r7, r5
- mov r2, r4
-.Larea1:
- mov r4, r3
- add r5, r3
- and r1, r3
- cmp/hi r2, r3
- bf .Larea2
- !
- ! Clear area 1
-#if defined(CONFIG_CPU_SH4)
-1: movca.l r0, @r2
-#else
-1: mov.l r0, @r2
-#endif
- add #4, r2
-2: mov.l r0, @r2
- add #4, r2
-3: mov.l r0, @r2
- add #4, r2
-4: mov.l r0, @r2
- add #4, r2
-5: mov.l r0, @r2
- add #4, r2
-6: mov.l r0, @r2
- add #4, r2
-7: mov.l r0, @r2
- add #4, r2
-8: mov.l r0, @r2
- add #4, r2
- cmp/hi r2, r3
- bt/s 1b
- nop
- !
- ! Clear area 2
-.Larea2:
- mov r4, r3
- add r5, r3
- cmp/hs r3, r2
- bt/s .Ldone
- sub r2, r3
-.L2: dt r3
-9: mov.b r0, @r2
- bf/s .L2
- add #1, r2
- !
-.Ldone: rts
- mov #0, r0 ! return 0 as normal return
-
- ! return the number of bytes remained
-.Lbad_clear_user:
- mov r4, r0
- add r5, r0
- rts
- sub r2, r0
-
-.section __ex_table,"a"
- .align 2
- .long 0b, .Lbad_clear_user
- .long 1b, .Lbad_clear_user
- .long 2b, .Lbad_clear_user
- .long 3b, .Lbad_clear_user
- .long 4b, .Lbad_clear_user
- .long 5b, .Lbad_clear_user
- .long 6b, .Lbad_clear_user
- .long 7b, .Lbad_clear_user
- .long 8b, .Lbad_clear_user
- .long 9b, .Lbad_clear_user
-.previous
diff --git a/arch/sh/lib/ashiftrt.S b/arch/sh/lib/ashiftrt.S
deleted file mode 100644
index 0f7145e3c51ee2..00000000000000
--- a/arch/sh/lib/ashiftrt.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .global __ashiftrt_r4_0
- .global __ashiftrt_r4_1
- .global __ashiftrt_r4_2
- .global __ashiftrt_r4_3
- .global __ashiftrt_r4_4
- .global __ashiftrt_r4_5
- .global __ashiftrt_r4_6
- .global __ashiftrt_r4_7
- .global __ashiftrt_r4_8
- .global __ashiftrt_r4_9
- .global __ashiftrt_r4_10
- .global __ashiftrt_r4_11
- .global __ashiftrt_r4_12
- .global __ashiftrt_r4_13
- .global __ashiftrt_r4_14
- .global __ashiftrt_r4_15
- .global __ashiftrt_r4_16
- .global __ashiftrt_r4_17
- .global __ashiftrt_r4_18
- .global __ashiftrt_r4_19
- .global __ashiftrt_r4_20
- .global __ashiftrt_r4_21
- .global __ashiftrt_r4_22
- .global __ashiftrt_r4_23
- .global __ashiftrt_r4_24
- .global __ashiftrt_r4_25
- .global __ashiftrt_r4_26
- .global __ashiftrt_r4_27
- .global __ashiftrt_r4_28
- .global __ashiftrt_r4_29
- .global __ashiftrt_r4_30
- .global __ashiftrt_r4_31
- .global __ashiftrt_r4_32
-
- .align 1
-__ashiftrt_r4_32:
-__ashiftrt_r4_31:
- rotcl r4
- rts
- subc r4,r4
-__ashiftrt_r4_30:
- shar r4
-__ashiftrt_r4_29:
- shar r4
-__ashiftrt_r4_28:
- shar r4
-__ashiftrt_r4_27:
- shar r4
-__ashiftrt_r4_26:
- shar r4
-__ashiftrt_r4_25:
- shar r4
-__ashiftrt_r4_24:
- shlr16 r4
- shlr8 r4
- rts
- exts.b r4,r4
-__ashiftrt_r4_23:
- shar r4
-__ashiftrt_r4_22:
- shar r4
-__ashiftrt_r4_21:
- shar r4
-__ashiftrt_r4_20:
- shar r4
-__ashiftrt_r4_19:
- shar r4
-__ashiftrt_r4_18:
- shar r4
-__ashiftrt_r4_17:
- shar r4
-__ashiftrt_r4_16:
- shlr16 r4
- rts
- exts.w r4,r4
-__ashiftrt_r4_15:
- shar r4
-__ashiftrt_r4_14:
- shar r4
-__ashiftrt_r4_13:
- shar r4
-__ashiftrt_r4_12:
- shar r4
-__ashiftrt_r4_11:
- shar r4
-__ashiftrt_r4_10:
- shar r4
-__ashiftrt_r4_9:
- shar r4
-__ashiftrt_r4_8:
- shar r4
-__ashiftrt_r4_7:
- shar r4
-__ashiftrt_r4_6:
- shar r4
-__ashiftrt_r4_5:
- shar r4
-__ashiftrt_r4_4:
- shar r4
-__ashiftrt_r4_3:
- shar r4
-__ashiftrt_r4_2:
- shar r4
-__ashiftrt_r4_1:
- rts
- shar r4
-__ashiftrt_r4_0:
- rts
- nop
diff --git a/arch/sh/lib/ashldi3.c b/arch/sh/lib/ashldi3.c
deleted file mode 100644
index e5afe093584742..00000000000000
--- a/arch/sh/lib/ashldi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashldi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.low = 0;
- w.s.high = (unsigned int) uu.s.low << -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.low >> bm;
-
- w.s.low = (unsigned int) uu.s.low << b;
- w.s.high = ((unsigned int) uu.s.high << b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/sh/lib/ashlsi3.S b/arch/sh/lib/ashlsi3.S
deleted file mode 100644
index 4df4401cdf31d5..00000000000000
--- a/arch/sh/lib/ashlsi3.S
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashlsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashlsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
-
- .global __ashlsi3
- .global __ashlsi3_r0
-
- .align 2
-__ashlsi3:
- mov r5,r0
- .align 2
-__ashlsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashlsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashlsi3_table:
- .byte ashlsi3_0-ashlsi3_table
- .byte ashlsi3_1-ashlsi3_table
- .byte ashlsi3_2-ashlsi3_table
- .byte ashlsi3_3-ashlsi3_table
- .byte ashlsi3_4-ashlsi3_table
- .byte ashlsi3_5-ashlsi3_table
- .byte ashlsi3_6-ashlsi3_table
- .byte ashlsi3_7-ashlsi3_table
- .byte ashlsi3_8-ashlsi3_table
- .byte ashlsi3_9-ashlsi3_table
- .byte ashlsi3_10-ashlsi3_table
- .byte ashlsi3_11-ashlsi3_table
- .byte ashlsi3_12-ashlsi3_table
- .byte ashlsi3_13-ashlsi3_table
- .byte ashlsi3_14-ashlsi3_table
- .byte ashlsi3_15-ashlsi3_table
- .byte ashlsi3_16-ashlsi3_table
- .byte ashlsi3_17-ashlsi3_table
- .byte ashlsi3_18-ashlsi3_table
- .byte ashlsi3_19-ashlsi3_table
- .byte ashlsi3_20-ashlsi3_table
- .byte ashlsi3_21-ashlsi3_table
- .byte ashlsi3_22-ashlsi3_table
- .byte ashlsi3_23-ashlsi3_table
- .byte ashlsi3_24-ashlsi3_table
- .byte ashlsi3_25-ashlsi3_table
- .byte ashlsi3_26-ashlsi3_table
- .byte ashlsi3_27-ashlsi3_table
- .byte ashlsi3_28-ashlsi3_table
- .byte ashlsi3_29-ashlsi3_table
- .byte ashlsi3_30-ashlsi3_table
- .byte ashlsi3_31-ashlsi3_table
-
-ashlsi3_6:
- shll2 r0
-ashlsi3_4:
- shll2 r0
-ashlsi3_2:
- rts
- shll2 r0
-
-ashlsi3_7:
- shll2 r0
-ashlsi3_5:
- shll2 r0
-ashlsi3_3:
- shll2 r0
-ashlsi3_1:
- rts
- shll r0
-
-ashlsi3_14:
- shll2 r0
-ashlsi3_12:
- shll2 r0
-ashlsi3_10:
- shll2 r0
-ashlsi3_8:
- rts
- shll8 r0
-
-ashlsi3_15:
- shll2 r0
-ashlsi3_13:
- shll2 r0
-ashlsi3_11:
- shll2 r0
-ashlsi3_9:
- shll8 r0
- rts
- shll r0
-
-ashlsi3_22:
- shll2 r0
-ashlsi3_20:
- shll2 r0
-ashlsi3_18:
- shll2 r0
-ashlsi3_16:
- rts
- shll16 r0
-
-ashlsi3_23:
- shll2 r0
-ashlsi3_21:
- shll2 r0
-ashlsi3_19:
- shll2 r0
-ashlsi3_17:
- shll16 r0
- rts
- shll r0
-
-ashlsi3_30:
- shll2 r0
-ashlsi3_28:
- shll2 r0
-ashlsi3_26:
- shll2 r0
-ashlsi3_24:
- shll16 r0
- rts
- shll8 r0
-
-ashlsi3_31:
- shll2 r0
-ashlsi3_29:
- shll2 r0
-ashlsi3_27:
- shll2 r0
-ashlsi3_25:
- shll16 r0
- shll8 r0
- rts
- shll r0
-
-ashlsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/ashrdi3.c b/arch/sh/lib/ashrdi3.c
deleted file mode 100644
index ae263fbf25383b..00000000000000
--- a/arch/sh/lib/ashrdi3.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __ashrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high =
- uu.s.high >> 31;
- w.s.low = uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/sh/lib/ashrsi3.S b/arch/sh/lib/ashrsi3.S
deleted file mode 100644
index bf3c4e03e6ffc9..00000000000000
--- a/arch/sh/lib/ashrsi3.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __ashrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __ashrsi3_r0
-!
-! Entry:
-!
-! r4: Value to shift
-! r0: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-
- .global __ashrsi3
- .global __ashrsi3_r0
-
- .align 2
-__ashrsi3:
- mov r5,r0
- .align 2
-__ashrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova ashrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-ashrsi3_table:
- .byte ashrsi3_0-ashrsi3_table
- .byte ashrsi3_1-ashrsi3_table
- .byte ashrsi3_2-ashrsi3_table
- .byte ashrsi3_3-ashrsi3_table
- .byte ashrsi3_4-ashrsi3_table
- .byte ashrsi3_5-ashrsi3_table
- .byte ashrsi3_6-ashrsi3_table
- .byte ashrsi3_7-ashrsi3_table
- .byte ashrsi3_8-ashrsi3_table
- .byte ashrsi3_9-ashrsi3_table
- .byte ashrsi3_10-ashrsi3_table
- .byte ashrsi3_11-ashrsi3_table
- .byte ashrsi3_12-ashrsi3_table
- .byte ashrsi3_13-ashrsi3_table
- .byte ashrsi3_14-ashrsi3_table
- .byte ashrsi3_15-ashrsi3_table
- .byte ashrsi3_16-ashrsi3_table
- .byte ashrsi3_17-ashrsi3_table
- .byte ashrsi3_18-ashrsi3_table
- .byte ashrsi3_19-ashrsi3_table
- .byte ashrsi3_20-ashrsi3_table
- .byte ashrsi3_21-ashrsi3_table
- .byte ashrsi3_22-ashrsi3_table
- .byte ashrsi3_23-ashrsi3_table
- .byte ashrsi3_24-ashrsi3_table
- .byte ashrsi3_25-ashrsi3_table
- .byte ashrsi3_26-ashrsi3_table
- .byte ashrsi3_27-ashrsi3_table
- .byte ashrsi3_28-ashrsi3_table
- .byte ashrsi3_29-ashrsi3_table
- .byte ashrsi3_30-ashrsi3_table
- .byte ashrsi3_31-ashrsi3_table
-
-ashrsi3_31:
- rotcl r0
- rts
- subc r0,r0
-
-ashrsi3_30:
- shar r0
-ashrsi3_29:
- shar r0
-ashrsi3_28:
- shar r0
-ashrsi3_27:
- shar r0
-ashrsi3_26:
- shar r0
-ashrsi3_25:
- shar r0
-ashrsi3_24:
- shlr16 r0
- shlr8 r0
- rts
- exts.b r0,r0
-
-ashrsi3_23:
- shar r0
-ashrsi3_22:
- shar r0
-ashrsi3_21:
- shar r0
-ashrsi3_20:
- shar r0
-ashrsi3_19:
- shar r0
-ashrsi3_18:
- shar r0
-ashrsi3_17:
- shar r0
-ashrsi3_16:
- shlr16 r0
- rts
- exts.w r0,r0
-
-ashrsi3_15:
- shar r0
-ashrsi3_14:
- shar r0
-ashrsi3_13:
- shar r0
-ashrsi3_12:
- shar r0
-ashrsi3_11:
- shar r0
-ashrsi3_10:
- shar r0
-ashrsi3_9:
- shar r0
-ashrsi3_8:
- shar r0
-ashrsi3_7:
- shar r0
-ashrsi3_6:
- shar r0
-ashrsi3_5:
- shar r0
-ashrsi3_4:
- shar r0
-ashrsi3_3:
- shar r0
-ashrsi3_2:
- shar r0
-ashrsi3_1:
- rts
- shar r0
-
-ashrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S
deleted file mode 100644
index 3e07074e009813..00000000000000
--- a/arch/sh/lib/checksum.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * $Id: checksum.S,v 1.10 2001/07/06 13:11:32 gniibe Exp $
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Pentium Pro/II routines:
- * Alexander Kjeldaas <astor@guardian.no>
- * Finn Arne Gangstad <finnag@guardian.no>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * Changes: Ingo Molnar, converted csum_partial_copy() to 2.1 exception
- * handling.
- * Andi Kleen, add zeroing on error
- * converted to pure assembler
- *
- * SuperH version: Copyright (C) 1999 Niibe Yutaka
- */
-
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-
-/*
- * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
- */
-
-.text
-ENTRY(csum_partial)
- /*
- * Experiments with Ethernet and SLIP connections show that buff
- * is aligned on either a 2-byte or 4-byte boundary. We get at
- * least a twofold speedup on 486 and Pentium if it is 4-byte aligned.
- * Fortunately, it is easy to convert 2-byte alignment to 4-byte
- * alignment for the unrolled loop.
- */
- mov r4, r0
- tst #3, r0 ! Check alignment.
- bt/s 2f ! Jump if alignment is ok.
- mov r4, r7 ! Keep a copy to check for alignment
- !
- tst #1, r0 ! Check alignment.
- bt 21f ! Jump if alignment is boundary of 2bytes.
-
- ! buf is odd
- tst r5, r5
- add #-1, r5
- bt 9f
- mov.b @r4+, r0
- extu.b r0, r0
- addc r0, r6 ! t=0 from previous tst
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
- mov r4, r0
- tst #2, r0
- bt 2f
-21:
- ! buf is 2 byte aligned (len could be 0)
- add #-2, r5 ! Alignment uses up two bytes.
- cmp/pz r5 !
- bt/s 1f ! Jump if we had at least two bytes.
- clrt
- bra 6f
- add #2, r5 ! r5 was < 2. Deal with it.
-1:
- mov.w @r4+, r0
- extu.w r0, r0
- addc r0, r6
- bf 2f
- add #1, r6
-2:
- ! buf is 4 byte aligned (len could be 0)
- mov r5, r1
- mov #-5, r0
- shld r0, r1
- tst r1, r1
- bt/s 4f ! if it's =0, go to 4f
- clrt
- .align 2
-3:
- mov.l @r4+, r0
- mov.l @r4+, r2
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- mov.l @r4+, r3
- addc r0, r6
- mov.l @r4+, r0
- addc r2, r6
- mov.l @r4+, r2
- addc r3, r6
- addc r0, r6
- addc r2, r6
- movt r0
- dt r1
- bf/s 3b
- cmp/eq #1, r0
- ! here, we know r1==0
- addc r1, r6 ! add carry to r6
-4:
- mov r5, r0
- and #0x1c, r0
- tst r0, r0
- bt 6f
- ! 4 bytes or more remaining
- mov r0, r1
- shlr2 r1
- mov #0, r2
-5:
- addc r2, r6
- mov.l @r4+, r2
- movt r0
- dt r1
- bf/s 5b
- cmp/eq #1, r0
- addc r2, r6
- addc r1, r6 ! r1==0 here, so it means add carry-bit
-6:
- ! 3 bytes or less remaining
- mov #3, r0
- and r0, r5
- tst r5, r5
- bt 9f ! if it's =0 go to 9f
- mov #2, r1
- cmp/hs r1, r5
- bf 7f
- mov.w @r4+, r0
- extu.w r0, r0
- cmp/eq r1, r5
- bt/s 8f
- clrt
- shll16 r0
- addc r0, r6
-7:
- mov.b @r4+, r0
- extu.b r0, r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-8:
- addc r0, r6
- mov #0, r0
- addc r0, r6
-9:
- ! Check if the buffer was misaligned, if so realign sum
- mov r7, r0
- tst #1, r0
- bt 10f
- mov r6, r0
- shll8 r6
- shlr16 r0
- shlr8 r0
- or r0, r6
-10:
- rts
- mov r6, r0
-
-/*
-unsigned int csum_partial_copy_generic (const char *src, char *dst, int len)
- */
-
-/*
- * Copy from ds while checksumming, otherwise like csum_partial with initial
- * sum being ~0U
- */
-
-#define EXC(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6001f ; \
- .previous
-
-!
-! r4: const char *SRC
-! r5: char *DST
-! r6: int LEN
-!
-ENTRY(csum_partial_copy_generic)
- mov #-1,r7
- mov #3,r0 ! Check src and dest are equally aligned
- mov r4,r1
- and r0,r1
- and r5,r0
- cmp/eq r1,r0
- bf 3f ! Different alignments, use slow version
- tst #1,r0 ! Check dest word aligned
- bf 3f ! If not, do it the slow way
-
- mov #2,r0
- tst r0,r5 ! Check dest alignment.
- bt 2f ! Jump if alignment is ok.
- add #-2,r6 ! Alignment uses up two bytes.
- cmp/pz r6 ! Jump if we had at least two bytes.
- bt/s 1f
- clrt
- add #2,r6 ! r6 was < 2. Deal with it.
- bra 4f
- mov r6,r2
-
-3: ! Handle different src and dest alignments.
- ! This is not common, so simple byte by byte copy will do.
- mov r6,r2
- shlr r6
- tst r6,r6
- bt 4f
- clrt
- .align 2
-5:
-EXC( mov.b @r4+,r1 )
-EXC( mov.b @r4+,r0 )
- extu.b r1,r1
-EXC( mov.b r1,@r5 )
-EXC( mov.b r0,@(1,r5) )
- extu.b r0,r0
- add #2,r5
-
-#ifdef __LITTLE_ENDIAN__
- shll8 r0
-#else
- shll8 r1
-#endif
- or r1,r0
-
- addc r0,r7
- movt r0
- dt r6
- bf/s 5b
- cmp/eq #1,r0
- mov #0,r0
- addc r0, r7
-
- mov r2, r0
- tst #1, r0
- bt 7f
- bra 5f
- clrt
-
- ! src and dest equally aligned, but to a two byte boundary.
- ! Handle first two bytes as a special case
- .align 2
-1:
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- add #2,r5
- extu.w r0,r0
- addc r0,r7
- mov #0,r0
- addc r0,r7
-2:
- mov r6,r2
- mov #-5,r0
- shld r0,r6
- tst r6,r6
- bt/s 2f
- clrt
- .align 2
-1:
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
-EXC( mov.l r1,@(4,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(8,r5) )
-EXC( mov.l r1,@(12,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(16,r5) )
-EXC( mov.l r1,@(20,r5) )
- addc r1,r7
-
-EXC( mov.l @r4+,r0 )
-EXC( mov.l @r4+,r1 )
- addc r0,r7
-EXC( mov.l r0,@(24,r5) )
-EXC( mov.l r1,@(28,r5) )
- addc r1,r7
- add #32,r5
- movt r0
- dt r6
- bf/s 1b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-
-2: mov r2,r6
- mov #0x1c,r0
- and r0,r6
- cmp/pl r6
- bf/s 4f
- clrt
- shlr2 r6
-3:
-EXC( mov.l @r4+,r0 )
- addc r0,r7
-EXC( mov.l r0,@r5 )
- add #4,r5
- movt r0
- dt r6
- bf/s 3b
- cmp/eq #1,r0
- mov #0,r0
- addc r0,r7
-4: mov r2,r6
- mov #3,r0
- and r0,r6
- cmp/pl r6
- bf 7f
- mov #2,r1
- cmp/hs r1,r6
- bf 5f
-EXC( mov.w @r4+,r0 )
-EXC( mov.w r0,@r5 )
- extu.w r0,r0
- add #2,r5
- cmp/eq r1,r6
- bt/s 6f
- clrt
- shll16 r0
- addc r0,r7
-5:
-EXC( mov.b @r4+,r0 )
-EXC( mov.b r0,@r5 )
- extu.b r0,r0
-#ifndef __LITTLE_ENDIAN__
- shll8 r0
-#endif
-6: addc r0,r7
- mov #0,r0
- addc r0,r7
-7:
-
-# Exception handler:
-.section .fixup, "ax"
-
-6001:
- rts
- mov #0,r0
-.previous
- rts
- mov r7,r0
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
deleted file mode 100644
index d4e9d18cee0bcc..00000000000000
--- a/arch/sh/lib/copy_page.S
+++ /dev/null
@@ -1,390 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * copy_page, __copy_user_page, __copy_user implementation of SuperH
- *
- * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima
- * Copyright (C) 2002 Toshinobu Sugioka
- * Copyright (C) 2006 Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-/*
- * copy_page
- * @to: P1 address
- * @from: P1 address
- *
- * void copy_page(void *to, void *from)
- */
-
-/*
- * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch
- * r8 --- from + PAGE_SIZE
- * r9 --- not used
- * r10 --- to
- * r11 --- from
- */
-ENTRY(copy_page)
- mov.l r8,@-r15
- mov.l r10,@-r15
- mov.l r11,@-r15
- mov r4,r10
- mov r5,r11
- mov r5,r8
- mov #(PAGE_SIZE >> 10), r0
- shll8 r0
- shll2 r0
- add r0,r8
- !
-1: mov.l @r11+,r0
- mov.l @r11+,r1
- mov.l @r11+,r2
- mov.l @r11+,r3
- mov.l @r11+,r4
- mov.l @r11+,r5
- mov.l @r11+,r6
- mov.l @r11+,r7
-#if defined(CONFIG_CPU_SH4)
- movca.l r0,@r10
-#else
- mov.l r0,@r10
-#endif
- add #32,r10
- mov.l r7,@-r10
- mov.l r6,@-r10
- mov.l r5,@-r10
- mov.l r4,@-r10
- mov.l r3,@-r10
- mov.l r2,@-r10
- mov.l r1,@-r10
- cmp/eq r11,r8
- bf/s 1b
- add #28,r10
- !
- mov.l @r15+,r11
- mov.l @r15+,r10
- mov.l @r15+,r8
- rts
- nop
-
-/*
- * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
- * Return the number of bytes NOT copied
- */
-#define EX(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6000f ; \
- .previous
-#define EX_NO_POP(...) \
- 9999: __VA_ARGS__ ; \
- .section __ex_table, "a"; \
- .long 9999b, 6005f ; \
- .previous
-ENTRY(__copy_user)
- ! Check if small number of bytes
- mov #11,r0
- mov r4,r3
- cmp/gt r0,r6 ! r6 (len) > r0 (11)
- bf/s .L_cleanup_loop_no_pop
- add r6,r3 ! last destination address
-
- ! Calculate bytes needed to align to src
- mov.l r11,@-r15
- neg r5,r0
- mov.l r10,@-r15
- add #4,r0
- mov.l r9,@-r15
- and #3,r0
- mov.l r8,@-r15
- tst r0,r0
- bt 2f
-
-1:
- ! Copy bytes to long word align src
-EX( mov.b @r5+,r1 )
- dt r0
- add #-1,r6
-EX( mov.b r1,@r4 )
- bf/s 1b
- add #1,r4
-
- ! Jump to appropriate routine depending on dest
-2: mov #3,r1
- mov r6, r2
- and r4,r1
- shlr2 r2
- shll2 r1
- mova .L_jump_tbl,r0
- mov.l @(r0,r1),r1
- jmp @r1
- nop
-
- .align 2
-.L_jump_tbl:
- .long .L_dest00
- .long .L_dest01
- .long .L_dest10
- .long .L_dest11
-
-/*
- * Come here if there are less than 12 bytes to copy
- *
- * Keep the branch target close, so the bf/s callee doesn't overflow
- * and result in a more expensive branch being inserted. This is the
- * fast-path for small copies, the jump via the jump table will hit the
- * default slow-path cleanup. -PFM.
- */
-.L_cleanup_loop_no_pop:
- tst r6,r6 ! Check explicitly for zero
- bt 1f
-
-2:
-EX_NO_POP( mov.b @r5+,r0 )
- dt r6
-EX_NO_POP( mov.b r0,@r4 )
- bf/s 2b
- add #1,r4
-
-1: mov #0,r0 ! normal return
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6005:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- rts
- nop
-
-! Destination = 00
-
-.L_dest00:
- ! Skip the large copy for small transfers
- mov #(32+32-4), r0
- cmp/gt r6, r0 ! r0 (60) > r6 (len)
- bt 1f
-
- ! Align dest to a 32 byte boundary
- neg r4,r0
- add #0x20, r0
- and #0x1f, r0
- tst r0, r0
- bt 2f
-
- sub r0, r6
- shlr2 r0
-3:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 3b
- add #4,r4
-
-2:
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r2 )
-EX( mov.l @r5+,r7 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.l @r5+,r11 )
-#ifdef CONFIG_CPU_SH4
-EX( movca.l r0,@r4 )
-#else
-EX( mov.l r0,@r4 )
-#endif
- add #-32, r6
-EX( mov.l r1,@(4,r4) )
- mov #32, r0
-EX( mov.l r2,@(8,r4) )
- cmp/gt r6, r0 ! r0 (32) > r6 (len)
-EX( mov.l r7,@(12,r4) )
-EX( mov.l r8,@(16,r4) )
-EX( mov.l r9,@(20,r4) )
-EX( mov.l r10,@(24,r4) )
-EX( mov.l r11,@(28,r4) )
- bf/s 2b
- add #32,r4
-
-1: mov r6, r0
- shlr2 r0
- tst r0, r0
- bt .L_cleanup
-1:
-EX( mov.l @r5+,r1 )
- dt r0
-EX( mov.l r1,@r4 )
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 10
-
-.L_dest10:
- mov r2,r7
- shlr2 r7
- shlr r7
- tst r7,r7
- mov #7,r0
- bt/s 1f
- and r0,r2
-2:
- dt r7
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
-EX( mov.w r0,@r4 )
- add #2,r4
- xtrct r1,r0
- xtrct r8,r1
- xtrct r9,r8
- xtrct r10,r9
-
-EX( mov.l r0,@r4 )
-EX( mov.l r1,@(4,r4) )
-EX( mov.l r8,@(8,r4) )
-EX( mov.l r9,@(12,r4) )
-
-EX( mov.l @r5+,r1 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r0 )
- xtrct r1,r10
- xtrct r8,r1
- xtrct r0,r8
- shlr16 r0
-EX( mov.l r10,@(16,r4) )
-EX( mov.l r1,@(20,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.w r0,@(28,r4) )
- bf/s 2b
- add #30,r4
-#else
-EX( mov.l @(28,r5),r0 )
-EX( mov.l @(24,r5),r8 )
-EX( mov.l @(20,r5),r9 )
-EX( mov.l @(16,r5),r10 )
-EX( mov.w r0,@(30,r4) )
- add #-2,r4
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(28,r4) )
-EX( mov.l r8,@(24,r4) )
-EX( mov.l r9,@(20,r4) )
-
-EX( mov.l @(12,r5),r0 )
-EX( mov.l @(8,r5),r8 )
- xtrct r0,r10
-EX( mov.l @(4,r5),r9 )
- mov.l r10,@(16,r4)
-EX( mov.l @r5,r10 )
- xtrct r8,r0
- xtrct r9,r8
- xtrct r10,r9
-EX( mov.l r0,@(12,r4) )
-EX( mov.l r8,@(8,r4) )
- swap.w r10,r0
-EX( mov.l r9,@(4,r4) )
-EX( mov.w r0,@(2,r4) )
-
- add #32,r5
- bf/s 2b
- add #34,r4
-#endif
- tst r2,r2
- bt .L_cleanup
-
-1: ! Read longword, write two words per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.w r0,@(2,r4) )
-#else
-EX( mov.w r0,@(2,r4) )
- shlr16 r0
-EX( mov.w r0,@r4 )
-#endif
- bf/s 1b
- add #4,r4
-
- bra .L_cleanup
- nop
-
-! Destination = 01 or 11
-
-.L_dest01:
-.L_dest11:
- ! Read longword, write byte, word, byte per iteration
-EX( mov.l @r5+,r0 )
- dt r2
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-EX( mov.b r0,@r4 )
- shlr8 r0
- add #1,r4
-EX( mov.w r0,@r4 )
- shlr16 r0
-EX( mov.b r0,@(2,r4) )
- bf/s .L_dest01
- add #3,r4
-#else
-EX( mov.b r0,@(3,r4) )
- shlr8 r0
- swap.w r0,r7
-EX( mov.b r7,@r4 )
- add #1,r4
-EX( mov.w r0,@r4 )
- bf/s .L_dest01
- add #3,r4
-#endif
-
-! Cleanup last few bytes
-.L_cleanup:
- mov r6,r0
- and #3,r0
- tst r0,r0
- bt .L_exit
- mov r0,r6
-
-.L_cleanup_loop:
-EX( mov.b @r5+,r0 )
- dt r6
-EX( mov.b r0,@r4 )
- bf/s .L_cleanup_loop
- add #1,r4
-
-.L_exit:
- mov #0,r0 ! normal return
-
-5000:
-
-# Exception handler:
-.section .fixup, "ax"
-6000:
- mov.l 8000f,r1
- mov r3,r0
- jmp @r1
- sub r4,r0
- .align 2
-8000: .long 5000b
-
-.previous
- mov.l @r15+,r8
- mov.l @r15+,r9
- mov.l @r15+,r10
- rts
- mov.l @r15+,r11
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
deleted file mode 100644
index dad8e6a54906be..00000000000000
--- a/arch/sh/lib/delay.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Precise Delay Loops for SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka & Kaz Kojima
- */
-
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-void __delay(unsigned long loops)
-{
- __asm__ __volatile__(
- /*
- * ST40-300 appears to have an issue with this code,
- * normally taking two cycles each loop, as with all
- * other SH variants. If however the branch and the
- * delay slot straddle an 8 byte boundary, this increases
- * to 3 cycles.
- * This align directive ensures this doesn't occur.
- */
- ".balign 8\n\t"
-
- "tst %0, %0\n\t"
- "1:\t"
- "bf/s 1b\n\t"
- " dt %0"
- : "=r" (loops)
- : "0" (loops)
- : "t");
-}
-
-inline void __const_udelay(unsigned long xloops)
-{
- xloops *= 4;
- __asm__("dmulu.l %0, %2\n\t"
- "sts mach, %0"
- : "=r" (xloops)
- : "0" (xloops),
- "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
- : "macl", "mach");
- __delay(++xloops);
-}
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
-}
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00000005);
-}
-
diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
deleted file mode 100644
index 0b67fbc44f6fef..00000000000000
--- a/arch/sh/lib/div64-generic.c
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Generic __div64_32 wrapper for __xdiv64_32.
- */
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-extern uint64_t __xdiv64_32(u64 n, u32 d);
-
-uint32_t __div64_32(u64 *xp, u32 y)
-{
- uint32_t rem;
- uint64_t q = __xdiv64_32(*xp, y);
-
- rem = *xp - q * y;
- *xp = q;
-
- return rem;
-}
diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S
deleted file mode 100644
index 4a9a966e71b0e7..00000000000000
--- a/arch/sh/lib/div64.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * unsigned long __xdiv64_32(unsigned long long n, unsigned long d);
- */
-
-#include <linux/linkage.h>
-
-.text
-ENTRY(__xdiv64_32)
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r4, r0
- mov r5, r1
-#else
- mov r4, r1
- mov r5, r0
-#endif
- cmp/hs r6, r1
- bf.s 1f
- mov #0, r2
-
- mov r1, r2
- mov #0, r3
- div0u
- .rept 32
- rotcl r2
- div1 r6, r3
- .endr
- rotcl r2
- mul.l r6, r2
- sts macl, r3
- sub r3, r1
-1:
- div0u
- .rept 32
- rotcl r0
- div1 r6, r1
- .endr
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- mov r2, r1
- rts
- rotcl r0
-#else
- rotcl r0
- mov r0, r1
- rts
- mov r2, r0
-#endif
diff --git a/arch/sh/lib/io.c b/arch/sh/lib/io.c
deleted file mode 100644
index ebcf7c0a7335ad..00000000000000
--- a/arch/sh/lib/io.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/lib/io.c - SH32 optimized I/O routines
- *
- * Copyright (C) 2000 Stuart Menefy
- * Copyright (C) 2005 Paul Mundt
- *
- * Provide real functions which expand to whatever the header file defined.
- * Also definitions of machine independent IO functions.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-
-void __raw_readsl(const void __iomem *addr, void *datap, int len)
-{
- u32 *data;
-
- for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
- *data++ = __raw_readl(addr);
-
- if (likely(len >= (0x20 >> 2))) {
- int tmp2, tmp3, tmp4, tmp5, tmp6;
-
- __asm__ __volatile__(
- "1: \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l @%7, %2 \n\t"
-#ifdef CONFIG_CPU_SH4
- "movca.l r0, @%0 \n\t"
-#else
- "mov.l r0, @%0 \n\t"
-#endif
- "mov.l @%7, %3 \n\t"
- "mov.l @%7, %4 \n\t"
- "mov.l @%7, %5 \n\t"
- "mov.l @%7, %6 \n\t"
- "mov.l @%7, r7 \n\t"
- "mov.l @%7, r0 \n\t"
- "mov.l %2, @(0x04,%0) \n\t"
- "mov #0x20>>2, %2 \n\t"
- "mov.l %3, @(0x08,%0) \n\t"
- "sub %2, %1 \n\t"
- "mov.l %4, @(0x0c,%0) \n\t"
- "cmp/hi %1, %2 ! T if 32 > len \n\t"
- "mov.l %5, @(0x10,%0) \n\t"
- "mov.l %6, @(0x14,%0) \n\t"
- "mov.l r7, @(0x18,%0) \n\t"
- "mov.l r0, @(0x1c,%0) \n\t"
- "bf.s 1b \n\t"
- " add #0x20, %0 \n\t"
- : "=&r" (data), "=&r" (len),
- "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
- "=&r" (tmp5), "=&r" (tmp6)
- : "r"(addr), "0" (data), "1" (len)
- : "r0", "r7", "t", "memory");
- }
-
- for (; len != 0; len--)
- *data++ = __raw_readl(addr);
-}
-EXPORT_SYMBOL(__raw_readsl);
-
-void __raw_writesl(void __iomem *addr, const void *data, int len)
-{
- if (likely(len != 0)) {
- int tmp1;
-
- __asm__ __volatile__ (
- "1: \n\t"
- "mov.l @%0+, %1 \n\t"
- "dt %3 \n\t"
- "bf.s 1b \n\t"
- " mov.l %1, @%4 \n\t"
- : "=&r" (data), "=&r" (tmp1)
- : "0" (data), "r" (len), "r"(addr)
- : "t", "memory");
- }
-}
-EXPORT_SYMBOL(__raw_writesl);
diff --git a/arch/sh/lib/libgcc.h b/arch/sh/lib/libgcc.h
deleted file mode 100644
index 58ada9e8f1c2bd..00000000000000
--- a/arch/sh/lib/libgcc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_LIBGCC_H
-#define __ASM_LIBGCC_H
-
-#include <asm/byteorder.h>
-
-typedef int word_type __attribute__ ((mode (__word__)));
-
-#ifdef __BIG_ENDIAN
-struct DWstruct {
- int high, low;
-};
-#elif defined(__LITTLE_ENDIAN)
-struct DWstruct {
- int low, high;
-};
-#else
-#error I feel sick.
-#endif
-
-typedef union {
- struct DWstruct s;
- long long ll;
-} DWunion;
-
-#endif /* __ASM_LIBGCC_H */
diff --git a/arch/sh/lib/lshrdi3.c b/arch/sh/lib/lshrdi3.c
deleted file mode 100644
index 33eaa1edbc3c06..00000000000000
--- a/arch/sh/lib/lshrdi3.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/module.h>
-
-#include "libgcc.h"
-
-long long __lshrdi3(long long u, word_type b)
-{
- DWunion uu, w;
- word_type bm;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
- bm = 32 - b;
-
- if (bm <= 0) {
- w.s.high = 0;
- w.s.low = (unsigned int) uu.s.high >> -bm;
- } else {
- const unsigned int carries = (unsigned int) uu.s.high << bm;
-
- w.s.high = (unsigned int) uu.s.high >> b;
- w.s.low = ((unsigned int) uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
-
-EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/sh/lib/lshrsi3.S b/arch/sh/lib/lshrsi3.S
deleted file mode 100644
index b79b8170061f33..00000000000000
--- a/arch/sh/lib/lshrsi3.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-!
-! __lshrsi3
-!
-! Entry:
-!
-! r4: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
-! __lshrsi3_r0
-!
-! Entry:
-!
-! r0: Value to shift
-! r5: Shifts
-!
-! Exit:
-!
-! r0: Result
-!
-! Destroys:
-!
-! (none)
-!
- .global __lshrsi3
- .global __lshrsi3_r0
-
- .align 2
-__lshrsi3:
- mov r5,r0
- .align 2
-__lshrsi3_r0:
- and #31,r0
- mov.l r4,@-r15
- mov r0,r4
- mova lshrsi3_table,r0
- mov.b @(r0,r4),r4
- add r4,r0
- jmp @r0
- mov.l @r15+,r0
-
- .align 2
-lshrsi3_table:
- .byte lshrsi3_0-lshrsi3_table
- .byte lshrsi3_1-lshrsi3_table
- .byte lshrsi3_2-lshrsi3_table
- .byte lshrsi3_3-lshrsi3_table
- .byte lshrsi3_4-lshrsi3_table
- .byte lshrsi3_5-lshrsi3_table
- .byte lshrsi3_6-lshrsi3_table
- .byte lshrsi3_7-lshrsi3_table
- .byte lshrsi3_8-lshrsi3_table
- .byte lshrsi3_9-lshrsi3_table
- .byte lshrsi3_10-lshrsi3_table
- .byte lshrsi3_11-lshrsi3_table
- .byte lshrsi3_12-lshrsi3_table
- .byte lshrsi3_13-lshrsi3_table
- .byte lshrsi3_14-lshrsi3_table
- .byte lshrsi3_15-lshrsi3_table
- .byte lshrsi3_16-lshrsi3_table
- .byte lshrsi3_17-lshrsi3_table
- .byte lshrsi3_18-lshrsi3_table
- .byte lshrsi3_19-lshrsi3_table
- .byte lshrsi3_20-lshrsi3_table
- .byte lshrsi3_21-lshrsi3_table
- .byte lshrsi3_22-lshrsi3_table
- .byte lshrsi3_23-lshrsi3_table
- .byte lshrsi3_24-lshrsi3_table
- .byte lshrsi3_25-lshrsi3_table
- .byte lshrsi3_26-lshrsi3_table
- .byte lshrsi3_27-lshrsi3_table
- .byte lshrsi3_28-lshrsi3_table
- .byte lshrsi3_29-lshrsi3_table
- .byte lshrsi3_30-lshrsi3_table
- .byte lshrsi3_31-lshrsi3_table
-
-lshrsi3_6:
- shlr2 r0
-lshrsi3_4:
- shlr2 r0
-lshrsi3_2:
- rts
- shlr2 r0
-
-lshrsi3_7:
- shlr2 r0
-lshrsi3_5:
- shlr2 r0
-lshrsi3_3:
- shlr2 r0
-lshrsi3_1:
- rts
- shlr r0
-
-lshrsi3_14:
- shlr2 r0
-lshrsi3_12:
- shlr2 r0
-lshrsi3_10:
- shlr2 r0
-lshrsi3_8:
- rts
- shlr8 r0
-
-lshrsi3_15:
- shlr2 r0
-lshrsi3_13:
- shlr2 r0
-lshrsi3_11:
- shlr2 r0
-lshrsi3_9:
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_22:
- shlr2 r0
-lshrsi3_20:
- shlr2 r0
-lshrsi3_18:
- shlr2 r0
-lshrsi3_16:
- rts
- shlr16 r0
-
-lshrsi3_23:
- shlr2 r0
-lshrsi3_21:
- shlr2 r0
-lshrsi3_19:
- shlr2 r0
-lshrsi3_17:
- shlr16 r0
- rts
- shlr r0
-
-lshrsi3_30:
- shlr2 r0
-lshrsi3_28:
- shlr2 r0
-lshrsi3_26:
- shlr2 r0
-lshrsi3_24:
- shlr16 r0
- rts
- shlr8 r0
-
-lshrsi3_31:
- shlr2 r0
-lshrsi3_29:
- shlr2 r0
-lshrsi3_27:
- shlr2 r0
-lshrsi3_25:
- shlr16 r0
- shlr8 r0
- rts
- shlr r0
-
-lshrsi3_0:
- rts
- nop
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
deleted file mode 100644
index c6ca90cc960618..00000000000000
--- a/arch/sh/lib/mcount.S
+++ /dev/null
@@ -1,287 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/lib/mcount.S
- *
- * Copyright (C) 2008, 2009 Paul Mundt
- * Copyright (C) 2008, 2009 Matt Fleming
- */
-#include <asm/ftrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#define MCOUNT_ENTER() \
- mov.l r4, @-r15; \
- mov.l r5, @-r15; \
- mov.l r6, @-r15; \
- mov.l r7, @-r15; \
- sts.l pr, @-r15; \
- \
- mov.l @(20,r15),r4; \
- sts pr, r5
-
-#define MCOUNT_LEAVE() \
- lds.l @r15+, pr; \
- mov.l @r15+, r7; \
- mov.l @r15+, r6; \
- mov.l @r15+, r5; \
- rts; \
- mov.l @r15+, r4
-
-#ifdef CONFIG_STACK_DEBUG
-/*
- * Perform diagnostic checks on the state of the kernel stack.
- *
- * Check for stack overflow. If there is less than 1KB free
- * then it has overflowed.
- *
- * Make sure the stack pointer contains a valid address. Valid
- * addresses for kernel stacks are anywhere after the bss
- * (after __bss_stop) and anywhere in init_thread_union (init_stack).
- */
-#define STACK_CHECK() \
- mov #(THREAD_SIZE >> 10), r0; \
- shll8 r0; \
- shll2 r0; \
- \
- /* r1 = sp & (THREAD_SIZE - 1) */ \
- mov #-1, r1; \
- add r0, r1; \
- and r15, r1; \
- \
- mov #TI_SIZE, r3; \
- mov #(STACK_WARN >> 8), r2; \
- shll8 r2; \
- add r3, r2; \
- \
- /* Is the stack overflowing? */ \
- cmp/hi r2, r1; \
- bf stack_panic; \
- \
- /* If sp > __bss_stop then we're OK. */ \
- mov.l .L_ebss, r1; \
- cmp/hi r1, r15; \
- bt 1f; \
- \
- /* If sp < init_stack, we're not OK. */ \
- mov.l .L_init_thread_union, r1; \
- cmp/hs r1, r15; \
- bf stack_panic; \
- \
- /* If sp > init_stack && sp < __bss_stop, not OK. */ \
- add r0, r1; \
- cmp/hs r1, r15; \
- bt stack_panic; \
-1:
-#else
-#define STACK_CHECK()
-#endif /* CONFIG_STACK_DEBUG */
-
- .align 2
- .globl _mcount
- .type _mcount,@function
- .globl mcount
- .type mcount,@function
-_mcount:
-mcount:
- STACK_CHECK()
-
-#ifndef CONFIG_FUNCTION_TRACER
- rts
- nop
-#else
- MCOUNT_ENTER()
-
-#ifdef CONFIG_DYNAMIC_FTRACE
- .globl mcount_call
-mcount_call:
- mov.l .Lftrace_stub, r6
-#else
- mov.l .Lftrace_trace_function, r6
- mov.l ftrace_stub, r7
- cmp/eq r6, r7
- bt skip_trace
- mov.l @r6, r6
-#endif
-
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- mov.l .Lftrace_graph_return, r6
- mov.l .Lftrace_stub, r7
- cmp/eq r6, r7
- bt 1f
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
-1:
- mov.l .Lftrace_graph_entry, r6
- mov.l .Lftrace_graph_entry_stub, r7
- cmp/eq r6, r7
- bt skip_trace
-
- mov.l .Lftrace_graph_caller, r0
- jmp @r0
- nop
-
- .align 2
-.Lftrace_graph_return:
- .long ftrace_graph_return
-.Lftrace_graph_entry:
- .long ftrace_graph_entry
-.Lftrace_graph_entry_stub:
- .long ftrace_graph_entry_stub
-.Lftrace_graph_caller:
- .long ftrace_graph_caller
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl skip_trace
-skip_trace:
- MCOUNT_LEAVE()
-
- .align 2
-.Lftrace_trace_function:
- .long ftrace_trace_function
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-/*
- * NOTE: Do not move either ftrace_graph_call or ftrace_caller
- * as this will affect the calculation of GRAPH_INSN_OFFSET.
- */
- .globl ftrace_graph_call
-ftrace_graph_call:
- mov.l .Lskip_trace, r0
- jmp @r0
- nop
-
- .align 2
-.Lskip_trace:
- .long skip_trace
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
- .globl ftrace_caller
-ftrace_caller:
- MCOUNT_ENTER()
-
- .globl ftrace_call
-ftrace_call:
- mov.l .Lftrace_stub, r6
- jsr @r6
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- bra ftrace_graph_call
- nop
-#else
- MCOUNT_LEAVE()
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
- .align 2
-
-/*
- * NOTE: From here on the locations of the .Lftrace_stub label and
- * ftrace_stub itself are fixed. Adding additional data here will skew
- * the displacement for the memory table and break the block replacement.
- * Place new labels either after the ftrace_stub body, or before
- * ftrace_caller. You have been warned.
- */
-.Lftrace_stub:
- .long ftrace_stub
-
- .globl ftrace_stub
-ftrace_stub:
- rts
- nop
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- .globl ftrace_graph_caller
-ftrace_graph_caller:
- mov.l 2f, r1
- jmp @r1
- nop
-1:
- /*
- * MCOUNT_ENTER() pushed 5 registers onto the stack, so
- * the stack address containing our return address is
- * r15 + 20.
- */
- mov #20, r0
- add r15, r0
- mov r0, r4
-
- mov.l .Lprepare_ftrace_return, r0
- jsr @r0
- nop
-
- MCOUNT_LEAVE()
-
- .align 2
-2: .long skip_trace
-.Lprepare_ftrace_return:
- .long prepare_ftrace_return
-
- .globl return_to_handler
-return_to_handler:
- /*
- * Save the return values.
- */
- mov.l r0, @-r15
- mov.l r1, @-r15
-
- mov #0, r4
-
- mov.l .Lftrace_return_to_handler, r0
- jsr @r0
- nop
-
- /*
- * The return value from ftrace_return_handler has the real
- * address that we should return to.
- */
- lds r0, pr
- mov.l @r15+, r1
- rts
- mov.l @r15+, r0
-
-
- .align 2
-.Lftrace_return_to_handler:
- .long ftrace_return_to_handler
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_STACK_DEBUG
- .globl stack_panic
-stack_panic:
- mov.l .Ldump_stack, r0
- jsr @r0
- nop
-
- mov.l .Lpanic, r0
- jsr @r0
- mov.l .Lpanic_s, r4
-
- rts
- nop
-
- .align 2
-.L_init_thread_union:
- .long init_thread_union
-.L_ebss:
- .long __bss_stop
-.Lpanic:
- .long panic
-.Lpanic_s:
- .long .Lpanic_str
-.Ldump_stack:
- .long dump_stack
-
- .section .rodata
- .align 2
-.Lpanic_str:
- .string "Stack error"
-#endif /* CONFIG_STACK_DEBUG */
diff --git a/arch/sh/lib/memchr.S b/arch/sh/lib/memchr.S
deleted file mode 100644
index 8ded104077aa32..00000000000000
--- a/arch/sh/lib/memchr.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memchr.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memchr" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memchr(const void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-ENTRY(memchr)
- tst r6,r6
- bt/s 2f
- exts.b r5,r5
-1: mov.b @r4,r1
- cmp/eq r1,r5
- bt/s 3f
- dt r6
- bf/s 1b
- add #1,r4
-2: mov #0,r4
-3: rts
- mov r4,r0
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
deleted file mode 100644
index a2435c0f6302ff..00000000000000
--- a/arch/sh/lib/memcpy-sh4.S
+++ /dev/null
@@ -1,800 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2002 STMicroelectronics Ltd
- * Modified from memcpy.S and micro-optimised for SH4
- * Stuart Menefy (stuart.menefy@st.com)
- *
- */
-#include <linux/linkage.h>
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- *
- * It is assumed that there is no overlap between src and dst.
- * If there is an overlap, then the results are undefined.
- */
-
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase1:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-1,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll16 r3 ! 103 EX
-
- mov r1,r6 ! 5 MT (latency=0)
- shll8 r3 ! 102 EX ! Oxxx
-
- shlr8 r6 ! 106 EX ! xNML
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! ONML
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! KLMN
- mov r7,r3 ! 5 MT (latency=0) ! OPQR
-
- cmp/hi r2,r0 ! 57 MT
- shlr16 r3 ! 107 EX
-
- shlr8 r3 ! 106 EX ! xxxO
- mov r1,r6 ! 5 MT (latency=0)
-
- shll8 r6 ! 102 EX ! LMNx
- mov r1,r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! LMNO
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#endif
- ! Finally, copy a byte at once, if necessary
-
- add #4,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
-
- ! Size is 16 or greater, and may have trailing bytes
-
- .balign 32
-.Lcase3:
- ! Read a long word and write a long word at once
- ! At the start of each iteration, r7 contains last long load
- add #-3,r5 ! 79 EX
- mov r4,r2 ! 5 MT (0 cycles latency)
-
- mov.l @(r0,r5),r7 ! 21 LS (2 cycles latency)
- add #-4,r5 ! 50 EX
-
- add #7,r2 ! 79 EX
- !
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- ! 6 cycles, 4 bytes per iteration
-3: mov.l @(r0,r5),r1 ! 21 LS (latency=2) ! NMLK
- mov r7, r3 ! 5 MT (latency=0) ! RQPO
-
- cmp/hi r2,r0 ! 57 MT
- shll8 r3 ! 102 EX ! QPOx
-
- mov r1,r6 ! 5 MT (latency=0)
- shlr16 r6 ! 107 EX
-
- shlr8 r6 ! 106 EX ! xxxN
- mov r1, r7 ! 5 MT (latency=0)
-
- or r6,r3 ! 82 EX ! QPON
- bt/s 3b ! 109 BR
-
- mov.l r3,@-r0 ! 30 LS
-#else
-3: mov r7,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r7 ! KLMN
- mov r7,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
-
- ! Finally, copy a byte at once, if necessary
-
- add #6,r5 ! 50 EX
- cmp/eq r4,r0 ! 54 MT
-
- add #-6,r2 ! 50 EX
- bt 9f ! 109 BR
-
-8: cmp/hi r2,r0 ! 57 MT
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
- bt/s 8b ! 109 BR
-
- mov.b r1,@-r0 ! 29 LS
-
-9: rts
- nop
-
-ENTRY(memcpy)
-
- ! Calculate the invariants which will be used in the remainder
- ! of the code:
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
-
- ! Short circuit the common case of src, dst and len being 32 bit aligned
- ! and test for zero length move
-
- mov r6, r0 ! 5 MT (0 cycle latency)
- or r4, r0 ! 82 EX
-
- or r5, r0 ! 82 EX
- tst r6, r6 ! 86 MT
-
- bt/s 99f ! 111 BR (zero len)
- tst #3, r0 ! 87 MT
-
- mov r4, r0 ! 5 MT (0 cycle latency)
- add r6, r0 ! 49 EX
-
- mov #16, r1 ! 6 EX
- bt/s .Lcase00 ! 111 BR (aligned)
-
- sub r4, r5 ! 75 EX
-
- ! Arguments are not nicely long word aligned or zero len.
- ! Check for small copies, and if so do a simple byte at a time copy.
- !
- ! Deciding on an exact value of 'small' is not easy, as the point at which
- ! using the optimised routines become worthwhile varies (these are the
- ! cycle counts for differnet sizes using byte-at-a-time vs. optimised):
- ! size byte-at-time long word byte
- ! 16 42 39-40 46-50 50-55
- ! 24 58 43-44 54-58 62-67
- ! 36 82 49-50 66-70 80-85
- ! However the penalty for getting it 'wrong' is much higher for long word
- ! aligned data (and this is more common), so use a value of 16.
-
- cmp/gt r6,r1 ! 56 MT
-
- add #-1,r5 ! 50 EX
- bf/s 6f ! 108 BR (not small)
-
- mov r5, r3 ! 5 MT (latency=0)
- shlr r6 ! 104 EX
-
- mov.b @(r0,r5),r1 ! 20 LS (latency=2)
- bf/s 4f ! 111 BR
-
- add #-1,r3 ! 50 EX
- tst r6, r6 ! 86 MT
-
- bt/s 98f ! 110 BR
- mov.b r1,@-r0 ! 29 LS
-
- ! 4 cycles, 2 bytes per iteration
-3: mov.b @(r0,r5),r1 ! 20 LS (latency=2)
-
-4: mov.b @(r0,r3),r2 ! 20 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.b r1,@-r0 ! 29 LS
- bf/s 3b ! 111 BR
-
- mov.b r2,@-r0 ! 29 LS
-98:
- rts
- nop
-
-99: rts
- mov r4, r0
-
- ! Size is not small, so its worthwhile looking for optimisations.
- ! First align destination to a long word boundary.
- !
- ! r5 = normal value -1
-
-6: tst #3, r0 ! 87 MT
- mov #3, r3 ! 6 EX
-
- bt/s 2f ! 111 BR
- and r0,r3 ! 78 EX
-
- ! 3 cycles, 1 byte per iteration
-1: dt r3 ! 67 EX
- mov.b @(r0,r5),r1 ! 19 LS (latency=2)
-
- add #-1, r6 ! 79 EX
- bf/s 1b ! 109 BR
-
- mov.b r1,@-r0 ! 28 LS
-
-2: add #1, r5 ! 79 EX
-
- ! Now select the appropriate bulk transfer code based on relative
- ! alignment of src and dst.
-
- mov r0, r3 ! 5 MT (latency=0)
-
- mov r5, r0 ! 5 MT (latency=0)
- tst #1, r0 ! 87 MT
-
- bf/s 1f ! 111 BR
- mov #64, r7 ! 6 EX
-
- ! bit 0 clear
-
- cmp/ge r7, r6 ! 55 MT
-
- bt/s 2f ! 111 BR
- tst #2, r0 ! 87 MT
-
- ! small
- bt/s .Lcase0
- mov r3, r0
-
- bra .Lcase2
- nop
-
- ! big
-2: bt/s .Lcase0b
- mov r3, r0
-
- bra .Lcase2b
- nop
-
- ! bit 0 set
-1: tst #2, r0 ! 87 MT
-
- bt/s .Lcase1
- mov r3, r0
-
- bra .Lcase3
- nop
-
-
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
-
- ! src, dst and size are all long word aligned
- ! size is non-zero
-
- .balign 32
-.Lcase00:
- mov #64, r1 ! 6 EX
- mov r5, r3 ! 5 MT (latency=0)
-
- cmp/gt r6, r1 ! 56 MT
- add #-4, r5 ! 50 EX
-
- bf .Lcase00b ! 108 BR (big loop)
- shlr2 r6 ! 105 EX
-
- shlr r6 ! 104 EX
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
- bf/s 4f ! 111 BR
- add #-8, r3 ! 50 EX
-
- tst r6, r6 ! 86 MT
- bt/s 5f ! 110 BR
-
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- dt r6 ! 67 EX
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
-5: rts
- nop
-
-
- ! Size is 16 or greater and less than 64, but may have trailing bytes
-
- .balign 32
-.Lcase0:
- add #-4, r5 ! 50 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- mov #4, r2 ! 6 EX
-
- add #11, r7 ! 50 EX
- tst r2, r6 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r1, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
- add #3,r5 ! 50 EX
-
- cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- .balign 32
-.Lcase0b:
- add #-4, r5 ! 50 EX
-
-.Lcase00b:
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! copy initial words until cache line aligned
-
- mov.l @(r0, r5), r1 ! 21 LS (latency=2)
- tst #4, r0 ! 87 MT
-
- mov r5, r6 ! 5 MT (latency=0)
- add #-4, r6 ! 50 EX
-
- bt/s 4f ! 111 BR
- add #8, r3 ! 50 EX
-
- tst #0x18, r0 ! 87 MT
-
- bt/s 1f ! 109 BR
- mov.l r1,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r1 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r6), r7 ! 21 LS (latency=2)
- cmp/eq r3, r0 ! 54 MT
-
- mov.l r1, @-r0 ! 30 LS
- bf/s 3b ! 109 BR
-
- mov.l r7, @-r0 ! 30 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1c, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- ! 16 cycles, 32 bytes per iteration
-2: mov.l @(0x00,r5),r0 ! 18 LS (latency=2)
- add #-0x20, r1 ! 50 EX
- mov.l @(0x04,r5),r3 ! 18 LS (latency=2)
- mov.l @(0x08,r5),r6 ! 18 LS (latency=2)
- mov.l @(0x0c,r5),r7 ! 18 LS (latency=2)
- mov.l @(0x10,r5),r8 ! 18 LS (latency=2)
- mov.l @(0x14,r5),r9 ! 18 LS (latency=2)
- mov.l @(0x18,r5),r10 ! 18 LS (latency=2)
- mov.l @(0x1c,r5),r11 ! 18 LS (latency=2)
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- mov.l r3,@(0x04,r1) ! 33 LS
- mov.l r6,@(0x08,r1) ! 33 LS
- mov.l r7,@(0x0c,r1) ! 33 LS
-
- mov.l r8,@(0x10,r1) ! 33 LS
- add #-0x20, r5 ! 50 EX
-
- mov.l r9,@(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10,@(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11,@(0x1c,r1) ! 33 LS
-
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
- sub r4, r1 ! 75 EX (len remaining)
-
- ! number of trailing bytes is non-zero
- !
- ! invariants restored (r5 already decremented by 4)
- ! also r1=num bytes remaining
-
- mov #4, r2 ! 6 EX
- mov r4, r7 ! 5 MT (latency=0)
-
- add #0x1c, r5 ! 50 EX (back to -4)
- cmp/hs r2, r1 ! 58 MT
-
- bf/s 5f ! 108 BR
- add #11, r7 ! 50 EX
-
- mov.l @(r0, r5), r6 ! 21 LS (latency=2)
- tst r2, r1 ! 86 MT
-
- mov r5, r3 ! 5 MT (latency=0)
- bt/s 4f ! 111 BR
-
- add #-4, r3 ! 50 EX
- cmp/hs r2, r1 ! 58 MT
-
- bt/s 5f ! 111 BR
- mov.l r6,@-r0 ! 30 LS
-
- ! 4 cycles, 2 long words per iteration
-3: mov.l @(r0, r5), r6 ! 21 LS (latency=2)
-
-4: mov.l @(r0, r3), r2 ! 21 LS (latency=2)
- cmp/hi r7, r0
-
- mov.l r6, @-r0 ! 30 LS
- bt/s 3b ! 109 BR
-
- mov.l r2, @-r0 ! 30 LS
-
- ! Copy the final 0-3 bytes
-
-5: cmp/eq r0, r4 ! 54 MT
- add #-10, r7 ! 50 EX
-
- bt 9f ! 110 BR
- add #3,r5 ! 50 EX
-
- ! 3 cycles, 1 byte per iteration
-1: mov.b @(r0,r5),r1 ! 19 LS
- cmp/hi r7,r0 ! 57 MT
-
- bt/s 1b ! 111 BR
- mov.b r1,@-r0 ! 28 LS
-
-9: rts
- nop
-
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
-
- .balign 32
-.Lcase2:
- ! Size is 16 or greater and less then 64, but may have trailing bytes
-
-2: mov r5, r6 ! 5 MT (latency=0)
- add #-2,r5 ! 50 EX
-
- mov r4,r2 ! 5 MT (latency=0)
- add #-4,r6 ! 50 EX
-
- add #7,r2 ! 50 EX
-3: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
-
- mov.w @(r0,r6),r3 ! 20 LS (latency=2)
- cmp/hi r2,r0 ! 57 MT
-
- mov.w r1,@-r0 ! 29 LS
- bt/s 3b ! 111 BR
-
- mov.w r3,@-r0 ! 29 LS
-
- bra 10f
- nop
-
-
- .balign 32
-.Lcase2b:
- ! Size is at least 64 bytes, so will be going round the big loop at least once.
- !
- ! r2 = rounded up r4
- ! r3 = rounded down r0
-
- mov r0, r3 ! 5 MT (latency=0)
- mov #(~0x1f), r1 ! 6 EX
-
- and r1, r3 ! 78 EX
- mov r4, r2 ! 5 MT (latency=0)
-
- cmp/eq r3, r0 ! 54 MT
- add #0x1f, r2 ! 50 EX
-
- add #-2, r5 ! 50 EX
- bt/s 1f ! 110 BR
- and r1, r2 ! 78 EX
-
- ! Copy a short word one at a time until we are cache line aligned
- ! Normal values: r0, r2, r3, r4
- ! Unused: r1, r6, r7
- ! Mod: r5 (=r5-2)
- !
- add #2, r3 ! 50 EX
-
-2: mov.w @(r0,r5),r1 ! 20 LS (latency=2)
- cmp/eq r3,r0 ! 54 MT
-
- bf/s 2b ! 111 BR
-
- mov.w r1,@-r0 ! 29 LS
-
- ! Copy the cache line aligned blocks
- !
- ! In use: r0, r2, r4, r5 (=r5-2)
- ! Scratch: r1, r3, r6, r7
- !
- ! We could do this with the four scratch registers, but if src
- ! and dest hit the same cache line, this will thrash, so make
- ! use of additional registers.
- !
- ! We also need r0 as a temporary (for movca), so 'undo' the invariant:
- ! r5: src (was r0+r5)
- ! r1: dest (was r0)
- ! this can be reversed at the end, so we don't need to save any extra
- ! state.
- !
-1: mov.l r8, @-r15 ! 30 LS
- add r0, r5 ! 49 EX
-
- mov.l r9, @-r15 ! 30 LS
- mov r0, r1 ! 5 MT (latency=0)
-
- mov.l r10, @-r15 ! 30 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r11, @-r15 ! 30 LS
-
- mov.l r12, @-r15 ! 30 LS
-
- ! 17 cycles, 32 bytes per iteration
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-2: mov.w @r5+, r0 ! 14 LS (latency=2) ..JI
- add #-0x20, r1 ! 50 EX
-
- mov.l @r5+, r3 ! 15 LS (latency=2) NMLK
-
- mov.l @r5+, r6 ! 15 LS (latency=2) RQPO
- shll16 r0 ! 103 EX JI..
-
- mov.l @r5+, r7 ! 15 LS (latency=2)
- xtrct r3, r0 ! 48 EX LKJI
-
- mov.l @r5+, r8 ! 15 LS (latency=2)
- xtrct r6, r3 ! 48 EX PONM
-
- mov.l @r5+, r9 ! 15 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @r5+, r10 ! 15 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @r5+, r11 ! 15 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.w @r5+, r12 ! 15 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- xtrct r11, r10 ! 48 EX
-
- mov.l r3, @(0x04,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r6, @(0x08,r1) ! 33 LS
-
- mov.l r7, @(0x0c,r1) ! 33 LS
-
- mov.l r8, @(0x10,r1) ! 33 LS
- add #-0x40, r5 ! 50 EX
-
- mov.l r9, @(0x14,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x18,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x1c,r1) ! 33 LS
-#else
-2: mov.w @(0x1e,r5), r0 ! 17 LS (latency=2)
- add #-2, r5 ! 50 EX
-
- mov.l @(0x1c,r5), r3 ! 18 LS (latency=2)
- add #-4, r1 ! 50 EX
-
- mov.l @(0x18,r5), r6 ! 18 LS (latency=2)
- shll16 r0 ! 103 EX
-
- mov.l @(0x14,r5), r7 ! 18 LS (latency=2)
- xtrct r3, r0 ! 48 EX
-
- mov.l @(0x10,r5), r8 ! 18 LS (latency=2)
- xtrct r6, r3 ! 48 EX
-
- mov.l @(0x0c,r5), r9 ! 18 LS (latency=2)
- xtrct r7, r6 ! 48 EX
-
- mov.l @(0x08,r5), r10 ! 18 LS (latency=2)
- xtrct r8, r7 ! 48 EX
-
- mov.l @(0x04,r5), r11 ! 18 LS (latency=2)
- xtrct r9, r8 ! 48 EX
-
- mov.l @(0x00,r5), r12 ! 18 LS (latency=2)
- xtrct r10, r9 ! 48 EX
-
- movca.l r0,@r1 ! 40 LS (latency=3-7)
- add #-0x1c, r1 ! 50 EX
-
- mov.l r3, @(0x18,r1) ! 33 LS
- xtrct r11, r10 ! 48 EX
-
- mov.l r6, @(0x14,r1) ! 33 LS
- xtrct r12, r11 ! 48 EX
-
- mov.l r7, @(0x10,r1) ! 33 LS
-
- mov.l r8, @(0x0c,r1) ! 33 LS
- add #-0x1e, r5 ! 50 EX
-
- mov.l r9, @(0x08,r1) ! 33 LS
- cmp/eq r2,r1 ! 54 MT
-
- mov.l r10, @(0x04,r1) ! 33 LS
- bf/s 2b ! 109 BR
-
- mov.l r11, @(0x00,r1) ! 33 LS
-#endif
-
- mov.l @r15+, r12
- mov r1, r0 ! 5 MT (latency=0)
-
- mov.l @r15+, r11 ! 15 LS
- sub r1, r5 ! 75 EX
-
- mov.l @r15+, r10 ! 15 LS
- cmp/eq r4, r0 ! 54 MT
-
- bf/s 1f ! 109 BR
- mov.l @r15+, r9 ! 15 LS
-
- rts
-1: mov.l @r15+, r8 ! 15 LS
-
- add #0x1e, r5 ! 50 EX
-
- ! Finish off a short word at a time
- ! r5 must be invariant - 2
-10: mov r4,r2 ! 5 MT (latency=0)
- add #1,r2 ! 50 EX
-
- cmp/hi r2, r0 ! 57 MT
- bf/s 1f ! 109 BR
-
- add #2, r2 ! 50 EX
-
-3: mov.w @(r0,r5),r1 ! 20 LS
- cmp/hi r2,r0 ! 57 MT
-
- bt/s 3b ! 109 BR
-
- mov.w r1,@-r0 ! 29 LS
-1:
-
- !
- ! Finally, copy the last byte if necessary
- cmp/eq r4,r0 ! 54 MT
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
diff --git a/arch/sh/lib/memcpy.S b/arch/sh/lib/memcpy.S
deleted file mode 100644
index 08ab3062c4b27c..00000000000000
--- a/arch/sh/lib/memcpy.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memcpy.S,v 1.3 2001/07/27 11:50:52 gniibe Exp $
- *
- * "memcpy" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memcpy(void *dst, const void *src, size_t n);
- * No overlap between the memory of DST and of SRC are assumed.
- */
-
-#include <linux/linkage.h>
-ENTRY(memcpy)
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r4,r0
- sub r4,r5 ! From here, r5 has the distance to r0
- add r6,r0 ! From here, r0 points the end of copying point
- mov #12,r1
- cmp/gt r6,r1
- bt/s 7f ! if it's too small, copy a byte at once
- add #-1,r5
- add #1,r5
- ! From here, r6 is free
- !
- ! r4 --> [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0 --> [ ... ] r0+r5 --> [ ... ]
- !
- !
- mov r5,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-7: mov r4,r2
- add #1,r2
-8:
- cmp/hi r2,r0
- mov.b @(r0,r5),r1
- bt/s 8b ! while (r0>r2)
- mov.b r1,@-r0
-9:
- rts
- nop
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-4,r5
- add #3,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
- add #-3,r5
-2: ! Second, copy a long word at once
- mov r4,r2
- add #7,r2
-3: mov.l @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.l r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #3,r5
- bra 8b
- add #-6,r2
-
-case1:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll16 r3
- shll8 r3 ! Oxxx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr8 r6 ! xNML
- or r6,r3 ! ONML
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr16 r3
- shlr8 r3 ! xxxO
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll8 r6 ! LMNx
- or r6,r3 ! LMNO
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #4,r5
- bra 8b
- add #-6,r2
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r5
- mov.b @(r0,r5),r1
- mov.b r1,@-r0
- !
-2: ! Second, read a word and write a word at once
- add #-1,r5
- mov r4,r2
- add #3,r2
- !
-3: mov.w @(r0,r5),r1
- cmp/hi r2,r0
- bt/s 3b
- mov.w r1,@-r0
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #1,r5
- mov.b @(r0,r5),r1
- rts
- mov.b r1,@-r0
-
-case3:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r5
-1: dt r3
- mov.b @(r0,r5),r1
- bf/s 1b
- mov.b r1,@-r0
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r5
- mov.l @(r0,r5),r1
- add #-4,r5
- mov r4,r2
- add #7,r2
- !
-#ifdef __LITTLE_ENDIAN__
-3: mov r1,r3 ! RQPO
- shll8 r3 ! QPOx
- mov.l @(r0,r5),r1 ! NMLK
- mov r1,r6
- shlr16 r6
- shlr8 r6 ! xxxN
- or r6,r3 ! QPON
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#else
-3: mov r1,r3 ! OPQR
- shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
- shll16 r6
- shll8 r6 ! Nxxx
- or r6,r3 ! NOPQ
- cmp/hi r2,r0
- bt/s 3b
- mov.l r3,@-r0
-#endif
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r4,r0
- bt/s 9b
- add #6,r5
- bra 8b
- add #-6,r2
diff --git a/arch/sh/lib/memmove.S b/arch/sh/lib/memmove.S
deleted file mode 100644
index bdca321814a95a..00000000000000
--- a/arch/sh/lib/memmove.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memmove.S,v 1.2 2001/07/27 11:51:09 gniibe Exp $
- *
- * "memmove" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memmove(void *dst, const void *src, size_t n);
- * The memory areas may overlap.
- */
-
-#include <linux/linkage.h>
-ENTRY(memmove)
- ! if dest > src, call memcpy (it copies in decreasing order)
- cmp/hi r5,r4
- bf 1f
- mov.l 2f,r0
- jmp @r0
- nop
- .balign 4
-2: .long memcpy
-1:
- sub r5,r4 ! From here, r4 has the distance to r0
- tst r6,r6
- bt/s 9f ! if n=0, do nothing
- mov r5,r0
- add r6,r5
- mov #12,r1
- cmp/gt r6,r1
- bt/s 8f ! if it's too small, copy a byte at once
- add #-1,r4
- add #1,r4
- !
- ! [ ... ] DST [ ... ] SRC
- ! [ ... ] [ ... ]
- ! : :
- ! r0+r4--> [ ... ] r0 --> [ ... ]
- ! : :
- ! [ ... ] [ ... ]
- ! r5 -->
- !
- mov r4,r1
- mov #3,r2
- and r2,r1
- shll2 r1
- mov r0,r3 ! Save the value on R0 to R3
- mova jmptable,r0
- add r1,r0
- mov.l @r0,r1
- jmp @r1
- mov r3,r0 ! and back to R0
- .balign 4
-jmptable:
- .long case0
- .long case1
- .long case2
- .long case3
-
- ! copy a byte at once
-8: mov.b @r0+,r1
- cmp/hs r5,r0
- bf/s 8b ! while (r0<r5)
- mov.b r1,@(r0,r4)
- add #1,r4
-9:
- add r4,r0
- rts
- sub r6,r0
-
-case_none:
- bra 8b
- add #-1,r4
-
-case0:
- !
- ! GHIJ KLMN OPQR --> GHIJ KLMN OPQR
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, copy a long word at once
- add #-3,r4
- add #-3,r5
-3: mov.l @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.l r1,@(r0,r4)
- add #3,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #4,r4
- bra 8b
- add #-1,r4
-
-case3:
- !
- ! GHIJ KLMN OPQR --> ...G HIJK LMNO PQR.
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- add #-2,r4
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr8 r3 ! xJIH
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll16 r2
- shll8 r2 ! Kxxx
- or r2,r3 ! KJIH
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll8 r3 ! HIJx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr16 r2
- shlr8 r2 ! xxxK
- or r2,r3 ! HIJK
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #7,r4
- add #-3,r0
- bra 8b
- add #-1,r4
-
-case2:
- !
- ! GHIJ KLMN OPQR --> ..GH IJKL MNOP QR..
- !
- ! First, align to word boundary
- tst #1,r0
- bt/s 2f
- add #-1,r4
- mov.b @r0+,r1
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a word and write a word at once
- add #-1,r4
- add #-1,r5
- !
-3: mov.w @r0+,r1
- cmp/hs r5,r0
- bf/s 3b
- mov.w r1,@(r0,r4)
- add #1,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #2,r4
- mov.b @r0,r1
- mov.b r1,@(r0,r4)
- bra 9b
- add #1,r0
-
-case1:
- !
- ! GHIJ KLMN OPQR --> .GHI JKLM NOPQ R...
- !
- ! First, align to long word boundary
- mov r0,r3
- and r2,r3
- tst r3,r3
- bt/s 2f
- add #-1,r4
- mov #4,r2
- sub r3,r2
-1: dt r2
- mov.b @r0+,r1
- bf/s 1b
- mov.b r1,@(r0,r4)
- !
-2: ! Second, read a long word and write a long word at once
- mov.l @(r0,r4),r1
- add #-7,r5
- add #-4,r4
- !
-#ifdef __LITTLE_ENDIAN__
- shll16 r1
- shll8 r1
-3: mov r1,r3 ! JIHG
- shlr16 r3
- shlr8 r3 ! xxxJ
- mov.l @r0+,r1 ! NMLK
- mov r1,r2
- shll8 r2 ! MLKx
- or r2,r3 ! MLKJ
- cmp/hs r5,r0
- bf/s 3b
- mov.l r3,@(r0,r4)
-#else
- shlr16 r1
- shlr8 r1
-3: mov r1,r3 ! GHIJ
- shll16 r3
- shll8 r3 ! Jxxx
- mov.l @r0+,r1 ! KLMN
- mov r1,r2
- shlr8 r2 ! xKLM
- or r2,r3 ! JKLM
- cmp/hs r5,r0
- bf/s 3b ! while(r0<r5)
- mov.l r3,@(r0,r4)
-#endif
- add #7,r5
- !
- ! Third, copy a byte at once, if necessary
- cmp/eq r5,r0
- bt/s 9b
- add #5,r4
- add #-3,r0
- bra 8b
- add #-1,r4
diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S
deleted file mode 100644
index 10649c4cdab8a4..00000000000000
--- a/arch/sh/lib/memset-sh4.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * "memset" implementation for SH4
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (c) 2009 STMicroelectronics Limited
- * Author: Stuart Menefy <stuart.menefy:st.com>
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- mov #12,r0
- add r6,r4
- cmp/gt r6,r0
- bt/s 40f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
-
- ! Check if enough bytes need to be copied to be worth the big loop
- mov #0x40, r0 ! (MT)
- cmp/gt r6,r0 ! (MT) 64 > len => slow loop
-
- bt/s 22f
- mov r6,r0
-
- ! align the dst to the cache block size if necessary
- mov r4, r3
- mov #~(0x1f), r1
-
- and r3, r1
- cmp/eq r3, r1
-
- bt/s 11f ! dst is already aligned
- sub r1, r3 ! r3-r1 -> r3
- shlr2 r3 ! number of loops
-
-10: mov.l r5,@-r4
- dt r3
- bf/s 10b
- add #-4, r6
-
-11: ! dst is 32byte aligned
- mov r6,r2
- mov #-5,r0
- shld r0,r2 ! number of loops
-
- add #-32, r4
- mov r5, r0
-12:
- movca.l r0,@r4
- mov.l r5,@(4, r4)
- mov.l r5,@(8, r4)
- mov.l r5,@(12,r4)
- mov.l r5,@(16,r4)
- mov.l r5,@(20,r4)
- add #-0x20, r6
- mov.l r5,@(24,r4)
- dt r2
- mov.l r5,@(28,r4)
- bf/s 12b
- add #-32, r4
-
- add #32, r4
- mov #8, r0
- cmp/ge r0, r6
- bf 40f
-
- mov r6,r0
-22:
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
-
- ! fill bytes (length may be zero)
-40: tst r6,r6
- bt 5f
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S
deleted file mode 100644
index a6d5ec0bd9cf93..00000000000000
--- a/arch/sh/lib/memset.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: memset.S,v 1.1 2000/04/14 16:49:01 mjd Exp $
- *
- * "memset" implementation of SuperH
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-/*
- * void *memset(void *s, int c, size_t n);
- */
-
-#include <linux/linkage.h>
-
-ENTRY(memset)
- tst r6,r6
- bt/s 5f ! if n=0, do nothing
- add r6,r4
- mov #12,r0
- cmp/gt r6,r0
- bt/s 4f ! if it's too small, set a byte at once
- mov r4,r0
- and #3,r0
- cmp/eq #0,r0
- bt/s 2f ! It's aligned
- sub r0,r6
-1:
- dt r0
- bf/s 1b
- mov.b r5,@-r4
-2: ! make VVVV
- extu.b r5,r5
- swap.b r5,r0 ! V0
- or r0,r5 ! VV
- swap.w r5,r0 ! VV00
- or r0,r5 ! VVVV
- !
- mov r6,r0
- shlr2 r0
- shlr r0 ! r0 = r6 >> 3
-3:
- dt r0
- mov.l r5,@-r4 ! set 8-byte at once
- bf/s 3b
- mov.l r5,@-r4
- !
- mov #7,r0
- and r0,r6
- tst r6,r6
- bt 5f
- ! fill bytes
-4:
- dt r6
- bf/s 4b
- mov.b r5,@-r4
-5:
- rts
- mov r4,r0
diff --git a/arch/sh/lib/movmem.S b/arch/sh/lib/movmem.S
deleted file mode 100644
index 8ac54d6b38a1b9..00000000000000
--- a/arch/sh/lib/movmem.S
+++ /dev/null
@@ -1,217 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- .text
- .balign 4
- .global __movmem
- .global __movstr
- .set __movstr, __movmem
- /* This would be a lot simpler if r6 contained the byte count
- minus 64, and we wouldn't be called here for a byte count of 64. */
-__movmem:
- sts.l pr,@-r15
- shll2 r6
- bsr __movmemSI52+2
- mov.l @(48,r5),r0
- .balign 4
-movmem_loop: /* Reached with rts */
- mov.l @(60,r5),r0
- add #-64,r6
- mov.l r0,@(60,r4)
- tst r6,r6
- mov.l @(56,r5),r0
- bt movmem_done
- mov.l r0,@(56,r4)
- cmp/pl r6
- mov.l @(52,r5),r0
- add #64,r5
- mov.l r0,@(52,r4)
- add #64,r4
- bt __movmemSI52
-! done all the large groups, do the remainder
-! jump to movmem+
- mova __movmemSI4+4,r0
- add r6,r0
- jmp @r0
-movmem_done: ! share slot insn, works out aligned.
- lds.l @r15+,pr
- mov.l r0,@(56,r4)
- mov.l @(52,r5),r0
- rts
- mov.l r0,@(52,r4)
- .balign 4
-
- .global __movmemSI64
- .global __movstrSI64
- .set __movstrSI64, __movmemSI64
-__movmemSI64:
- mov.l @(60,r5),r0
- mov.l r0,@(60,r4)
- .global __movmemSI60
- .global __movstrSI60
- .set __movstrSI60, __movmemSI60
-__movmemSI60:
- mov.l @(56,r5),r0
- mov.l r0,@(56,r4)
- .global __movmemSI56
- .global __movstrSI56
- .set __movstrSI56, __movmemSI56
-__movmemSI56:
- mov.l @(52,r5),r0
- mov.l r0,@(52,r4)
- .global __movmemSI52
- .global __movstrSI52
- .set __movstrSI52, __movmemSI52
-__movmemSI52:
- mov.l @(48,r5),r0
- mov.l r0,@(48,r4)
- .global __movmemSI48
- .global __movstrSI48
- .set __movstrSI48, __movmemSI48
-__movmemSI48:
- mov.l @(44,r5),r0
- mov.l r0,@(44,r4)
- .global __movmemSI44
- .global __movstrSI44
- .set __movstrSI44, __movmemSI44
-__movmemSI44:
- mov.l @(40,r5),r0
- mov.l r0,@(40,r4)
- .global __movmemSI40
- .global __movstrSI40
- .set __movstrSI40, __movmemSI40
-__movmemSI40:
- mov.l @(36,r5),r0
- mov.l r0,@(36,r4)
- .global __movmemSI36
- .global __movstrSI36
- .set __movstrSI36, __movmemSI36
-__movmemSI36:
- mov.l @(32,r5),r0
- mov.l r0,@(32,r4)
- .global __movmemSI32
- .global __movstrSI32
- .set __movstrSI32, __movmemSI32
-__movmemSI32:
- mov.l @(28,r5),r0
- mov.l r0,@(28,r4)
- .global __movmemSI28
- .global __movstrSI28
- .set __movstrSI28, __movmemSI28
-__movmemSI28:
- mov.l @(24,r5),r0
- mov.l r0,@(24,r4)
- .global __movmemSI24
- .global __movstrSI24
- .set __movstrSI24, __movmemSI24
-__movmemSI24:
- mov.l @(20,r5),r0
- mov.l r0,@(20,r4)
- .global __movmemSI20
- .global __movstrSI20
- .set __movstrSI20, __movmemSI20
-__movmemSI20:
- mov.l @(16,r5),r0
- mov.l r0,@(16,r4)
- .global __movmemSI16
- .global __movstrSI16
- .set __movstrSI16, __movmemSI16
-__movmemSI16:
- mov.l @(12,r5),r0
- mov.l r0,@(12,r4)
- .global __movmemSI12
- .global __movstrSI12
- .set __movstrSI12, __movmemSI12
-__movmemSI12:
- mov.l @(8,r5),r0
- mov.l r0,@(8,r4)
- .global __movmemSI8
- .global __movstrSI8
- .set __movstrSI8, __movmemSI8
-__movmemSI8:
- mov.l @(4,r5),r0
- mov.l r0,@(4,r4)
- .global __movmemSI4
- .global __movstrSI4
- .set __movstrSI4, __movmemSI4
-__movmemSI4:
- mov.l @(0,r5),r0
- rts
- mov.l r0,@(0,r4)
-
- .global __movmem_i4_even
- .global __movstr_i4_even
- .set __movstr_i4_even, __movmem_i4_even
-
- .global __movmem_i4_odd
- .global __movstr_i4_odd
- .set __movstr_i4_odd, __movmem_i4_odd
-
- .global __movmemSI12_i4
- .global __movstrSI12_i4
- .set __movstrSI12_i4, __movmemSI12_i4
-
- .p2align 5
-L_movmem_2mod4_end:
- mov.l r0,@(16,r4)
- rts
- mov.l r1,@(20,r4)
-
- .p2align 2
-
-__movmem_i4_even:
- mov.l @r5+,r0
- bra L_movmem_start_even
- mov.l @r5+,r1
-
-__movmem_i4_odd:
- mov.l @r5+,r1
- add #-4,r4
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r1,@(4,r4)
- mov.l r2,@(8,r4)
-
-L_movmem_loop:
- mov.l r3,@(12,r4)
- dt r6
- mov.l @r5+,r0
- bt/s L_movmem_2mod4_end
- mov.l @r5+,r1
- add #16,r4
-L_movmem_start_even:
- mov.l @r5+,r2
- mov.l @r5+,r3
- mov.l r0,@r4
- dt r6
- mov.l r1,@(4,r4)
- bf/s L_movmem_loop
- mov.l r2,@(8,r4)
- rts
- mov.l r3,@(12,r4)
-
- .p2align 4
-__movmemSI12_i4:
- mov.l @r5,r0
- mov.l @(4,r5),r1
- mov.l @(8,r5),r2
- mov.l r0,@r4
- mov.l r1,@(4,r4)
- rts
- mov.l r2,@(8,r4)
diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S
deleted file mode 100644
index 80ea53dd34f6dd..00000000000000
--- a/arch/sh/lib/strlen.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Id: strlen.S,v 1.2 2001/06/29 14:07:15 gniibe Exp $
- *
- * "strlen" implementation of SuperH
- *
- * Copyright (C) 1999 Kaz Kojima
- *
- */
-
-/* size_t strlen (const char *s) */
-
-#include <linux/linkage.h>
-ENTRY(strlen)
- mov r4,r0
- and #3,r0
- tst r0,r0
- bt/s 1f
- mov #0,r2
-
- add #-1,r0
- shll2 r0
- shll r0
- braf r0
- nop
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
- mov.b @r4+,r1
- tst r1,r1
- bt 8f
- add #1,r2
-
-1:
- mov #0,r3
-2:
- mov.l @r4+,r1
- cmp/str r3,r1
- bf/s 2b
- add #4,r2
-
- add #-4,r2
-#ifndef __LITTLE_ENDIAN__
- swap.b r1,r1
- swap.w r1,r1
- swap.b r1,r1
-#endif
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt/s 8f
- shlr8 r1
- add #1,r2
- extu.b r1,r0
- tst r0,r0
- bt 8f
- add #1,r2
-8:
- rts
- mov r2,r0
diff --git a/arch/sh/lib/udiv_qrnnd.S b/arch/sh/lib/udiv_qrnnd.S
deleted file mode 100644
index 28938daccd6b44..00000000000000
--- a/arch/sh/lib/udiv_qrnnd.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
- /* r0: rn r1: qn */ /* r0: n1 r4: n0 r5: d r6: d1 */ /* r2: __m */
- /* n1 < d, but n1 might be larger than d1. */
- .global __udiv_qrnnd_16
- .balign 8
-__udiv_qrnnd_16:
- div0u
- cmp/hi r6,r0
- bt .Lots
- .rept 16
- div1 r6,r0
- .endr
- extu.w r0,r1
- bt 0f
- add r6,r0
-0: rotcl r1
- mulu.w r1,r5
- xtrct r4,r0
- swap.w r0,r0
- sts macl,r2
- cmp/hs r2,r0
- sub r2,r0
- bt 0f
- addc r5,r0
- add #-1,r1
- bt 0f
-1: add #-1,r1
- rts
- add r5,r0
- .balign 8
-.Lots:
- sub r5,r0
- swap.w r4,r1
- xtrct r0,r1
- clrt
- mov r1,r0
- addc r5,r0
- mov #-1,r1
- bf/s 1b
- shlr16 r1
-0: rts
- nop
diff --git a/arch/sh/lib/udivsi3.S b/arch/sh/lib/udivsi3.S
deleted file mode 100644
index 09ed1f9deb2ea7..00000000000000
--- a/arch/sh/lib/udivsi3.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
- .balign 4
- .global __udivsi3
- .type __udivsi3, @function
-div8:
- div1 r5,r4
-div7:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx4:
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- div1 r5,r4; rotcl r0
- rts; div1 r5,r4
-
-__udivsi3:
- sts.l pr,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- bf/s large_divisor
- div0u
- swap.w r4,r0
- shlr16 r4
- bsr div8
- shll16 r5
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div8
- swap.w r4,r4
- bsr div7
- div1 r5,r4
- lds.l @r15+,pr
- xtrct r4,r0
- swap.w r0,r0
- rotcl r0
- rts
- shlr16 r5
-
-large_divisor:
- mov #0,r0
- xtrct r4,r0
- xtrct r0,r4
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- bsr divx4
- rotcl r0
- lds.l @r15+,pr
- rts
- rotcl r0
diff --git a/arch/sh/lib/udivsi3_i4i-Os.S b/arch/sh/lib/udivsi3_i4i-Os.S
deleted file mode 100644
index fa4e4dff3da142..00000000000000
--- a/arch/sh/lib/udivsi3_i4i-Os.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
- *
- * Copyright (C) 2006 Free Software Foundation, Inc.
- */
-
-/* Moderately Space-optimized libgcc routines for the Renesas SH /
- STMicroelectronics ST40 CPUs.
- Contributed by J"orn Rennecke joern.rennecke@st.com. */
-
-/* Size: 186 bytes jointly for udivsi3_i4i and sdivsi3_i4i
- sh4-200 run times:
- udiv small divisor: 55 cycles
- udiv large divisor: 52 cycles
- sdiv small divisor, positive result: 59 cycles
- sdiv large divisor, positive result: 56 cycles
- sdiv small divisor, negative result: 65 cycles (*)
- sdiv large divisor, negative result: 62 cycles (*)
- (*): r2 is restored in the rts delay slot and has a lingering latency
- of two more cycles. */
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
- .type __sdivsi3_i4i, @function
-__udivsi3_i4i:
- sts pr,r1
- mov.l r4,@-r15
- extu.w r5,r0
- cmp/eq r5,r0
- swap.w r4,r0
- shlr16 r4
- bf/s large_divisor
- div0u
- mov.l r5,@-r15
- shll16 r5
-sdiv_small_divisor:
- div1 r5,r4
- bsr div6
- div1 r5,r4
- div1 r5,r4
- bsr div6
- div1 r5,r4
- xtrct r4,r0
- xtrct r0,r4
- bsr div7
- swap.w r4,r4
- div1 r5,r4
- bsr div7
- div1 r5,r4
- xtrct r4,r0
- mov.l @r15+,r5
- swap.w r0,r0
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-div7:
- div1 r5,r4
-div6:
- div1 r5,r4; div1 r5,r4; div1 r5,r4
- div1 r5,r4; div1 r5,r4; rts; div1 r5,r4
-
-divx3:
- rotcl r0
- div1 r5,r4
- rotcl r0
- div1 r5,r4
- rotcl r0
- rts
- div1 r5,r4
-
-large_divisor:
- mov.l r5,@-r15
-sdiv_large_divisor:
- xor r4,r0
- .rept 4
- rotcl r0
- bsr divx3
- div1 r5,r4
- .endr
- mov.l @r15+,r5
- mov.l @r15+,r4
- jmp @r1
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.l r5,@-r15
- bt/s pos_divisor
- cmp/pz r4
- neg r5,r5
- extu.w r5,r0
- bt/s neg_result
- cmp/eq r5,r0
- neg r4,r4
-pos_result:
- swap.w r4,r0
- bra sdiv_check_divisor
- sts pr,r1
-pos_divisor:
- extu.w r5,r0
- bt/s pos_result
- cmp/eq r5,r0
- neg r4,r4
-neg_result:
- mova negate_result,r0
- ;
- mov r0,r1
- swap.w r4,r0
- lds r2,macl
- sts pr,r2
-sdiv_check_divisor:
- shlr16 r4
- bf/s sdiv_large_divisor
- div0u
- bra sdiv_small_divisor
- shll16 r5
- .balign 4
-negate_result:
- neg r0,r0
- jmp @r2
- sts macl,r2
diff --git a/arch/sh/lib/udivsi3_i4i.S b/arch/sh/lib/udivsi3_i4i.S
deleted file mode 100644
index 6944eb6b4a75ca..00000000000000
--- a/arch/sh/lib/udivsi3_i4i.S
+++ /dev/null
@@ -1,645 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
-
- Copyright (C) 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006
- Free Software Foundation, Inc.
-*/
-
-!! libgcc routines for the Renesas / SuperH SH CPUs.
-!! Contributed by Steve Chamberlain.
-!! sac@cygnus.com
-
-!! ashiftrt_r4_x, ___ashrsi3, ___ashlsi3, ___lshrsi3 routines
-!! recoded in assembly by Toshiyasu Morita
-!! tm@netcom.com
-
-/* SH2 optimizations for ___ashrsi3, ___ashlsi3, ___lshrsi3 and
- ELF local label prefixes by J"orn Rennecke
- amylaar@cygnus.com */
-
-/* This code used shld, thus is not suitable for SH1 / SH2. */
-
-/* Signed / unsigned division without use of FPU, optimized for SH4.
- Uses a lookup table for divisors in the range -128 .. +128, and
- div1 with case distinction for larger divisors in three more ranges.
- The code is lumped together with the table to allow the use of mova. */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define L_LSB 0
-#define L_LSWMSB 1
-#define L_MSWLSB 2
-#else
-#define L_LSB 3
-#define L_LSWMSB 2
-#define L_MSWLSB 1
-#endif
-
- .balign 4
- .global __udivsi3_i4i
- .global __udivsi3_i4
- .set __udivsi3_i4, __udivsi3_i4i
- .type __udivsi3_i4i, @function
-__udivsi3_i4i:
- mov.w c128_w, r1
- div0u
- mov r4,r0
- shlr8 r0
- cmp/hi r1,r5
- extu.w r5,r1
- bf udiv_le128
- cmp/eq r5,r1
- bf udiv_ge64k
- shlr r0
- mov r5,r1
- shll16 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
- div1 r5,r0
- div1 r5,r0
- bra udiv_25
- div1 r5,r0
-
-div_le128:
- mova div_table_ix,r0
- bra div_le128_2
- mov.b @(r0,r5),r1
-udiv_le128:
- mov.l r4,@-r15
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mov.l r5,@-r15
-div_le128_2:
- mova div_table_inv,r0
- mov.l @(r0,r1),r1
- mov r5,r0
- tst #0xfe,r0
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- bt/s div_by_1
- mov r4,r0
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- rts
- shld r1,r0
-
-div_by_1_neg:
- neg r4,r0
-div_by_1:
- mov.l @r15+,r5
- rts
- mov.l @r15+,r4
-
-div_ge64k:
- bt/s div_r8
- div0u
- shll8 r5
- bra div_ge64k_2
- div1 r5,r0
-udiv_ge64k:
- cmp/hi r0,r5
- mov r5,r1
- bt udiv_r8
- shll8 r5
- mov.l r4,@-r15
- div1 r5,r0
- mov.l r1,@-r15
-div_ge64k_2:
- div1 r5,r0
- mov.l zero_l,r1
- .rept 4
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_end
- xor r4,r0
-
-div_r8:
- shll16 r4
- bra div_r8_2
- shll8 r4
-udiv_r8:
- mov.l r4,@-r15
- shll16 r4
- clrt
- shll8 r4
- mov.l r5,@-r15
-div_r8_2:
- rotcl r4
- mov r0,r1
- div1 r5,r1
- mov r4,r0
- rotcl r0
- mov r5,r4
- div1 r5,r1
- .rept 5
- rotcl r0; div1 r5,r1
- .endr
- rotcl r0
- mov.l @r15+,r5
- div1 r4,r1
- mov.l @r15+,r4
- rts
- rotcl r0
-
- .global __sdivsi3_i4i
- .global __sdivsi3_i4
- .global __sdivsi3
- .set __sdivsi3_i4, __sdivsi3_i4i
- .set __sdivsi3, __sdivsi3_i4i
- .type __sdivsi3_i4i, @function
- /* This is link-compatible with a __sdivsi3 call,
- but we effectively clobber only r1. */
-__sdivsi3_i4i:
- mov.l r4,@-r15
- cmp/pz r5
- mov.w c128_w, r1
- bt/s pos_divisor
- cmp/pz r4
- mov.l r5,@-r15
- neg r5,r5
- bt/s neg_result
- cmp/hi r1,r5
- neg r4,r4
-pos_result:
- extu.w r5,r0
- bf div_le128
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k
- cmp/hi r0,r5
- div0u
- shll16 r5
- div1 r5,r0
- div1 r5,r0
- div1 r5,r0
-udiv_25:
- mov.l zero_l,r1
- div1 r5,r0
- div1 r5,r0
- mov.l r1,@-r15
- .rept 3
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r0
- mov.l @r15+,r5
- or r4,r0
- mov.l @r15+,r4
- rts
- rotcl r0
-
-div_le128_neg:
- tst #0xfe,r0
- mova div_table_ix,r0
- mov.b @(r0,r5),r1
- mova div_table_inv,r0
- bt/s div_by_1_neg
- mov.l @(r0,r1),r1
- mova div_table_clz,r0
- dmulu.l r1,r4
- mov.b @(r0,r5),r1
- mov.l @r15+,r5
- sts mach,r0
- /* clrt */
- addc r4,r0
- mov.l @r15+,r4
- rotcr r0
- shld r1,r0
- rts
- neg r0,r0
-
-pos_divisor:
- mov.l r5,@-r15
- bt/s pos_result
- cmp/hi r1,r5
- neg r4,r4
-neg_result:
- extu.w r5,r0
- bf div_le128_neg
- cmp/eq r5,r0
- mov r4,r0
- shlr8 r0
- bf/s div_ge64k_neg
- cmp/hi r0,r5
- div0u
- mov.l zero_l,r1
- shll16 r5
- div1 r5,r0
- mov.l r1,@-r15
- .rept 7
- div1 r5,r0
- .endr
- mov.b r0,@(L_MSWLSB,r15)
- xtrct r4,r0
- swap.w r0,r0
- .rept 8
- div1 r5,r0
- .endr
- mov.b r0,@(L_LSWMSB,r15)
-div_ge64k_neg_end:
- .rept 8
- div1 r5,r0
- .endr
- mov.l @r15+,r4 ! zero-extension and swap using LS unit.
- extu.b r0,r1
- mov.l @r15+,r5
- or r4,r1
-div_r8_neg_end:
- mov.l @r15+,r4
- rotcl r1
- rts
- neg r1,r0
-
-div_ge64k_neg:
- bt/s div_r8_neg
- div0u
- shll8 r5
- mov.l zero_l,r1
- .rept 6
- div1 r5,r0
- .endr
- mov.l r1,@-r15
- div1 r5,r0
- mov.w m256_w,r1
- div1 r5,r0
- mov.b r0,@(L_LSWMSB,r15)
- xor r4,r0
- and r1,r0
- bra div_ge64k_neg_end
- xor r4,r0
-
-c128_w:
- .word 128
-
-div_r8_neg:
- clrt
- shll16 r4
- mov r4,r1
- shll8 r1
- mov r5,r4
- .rept 7
- rotcl r1; div1 r5,r0
- .endr
- mov.l @r15+,r5
- rotcl r1
- bra div_r8_neg_end
- div1 r4,r0
-
-m256_w:
- .word 0xff00
-/* This table has been generated by divtab-sh4.c. */
- .balign 4
-div_table_clz:
- .byte 0
- .byte 1
- .byte 0
- .byte -1
- .byte -1
- .byte -2
- .byte -2
- .byte -2
- .byte -2
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -3
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -4
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -5
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
- .byte -6
-/* Lookup table translating positive divisor to index into table of
- normalized inverse. N.B. the '0' entry is also the last entry of the
- previous table, and causes an unaligned access for division by zero. */
-div_table_ix:
- .byte -6
- .byte -128
- .byte -128
- .byte 0
- .byte -128
- .byte -64
- .byte 0
- .byte 64
- .byte -128
- .byte -96
- .byte -64
- .byte -32
- .byte 0
- .byte 32
- .byte 64
- .byte 96
- .byte -128
- .byte -112
- .byte -96
- .byte -80
- .byte -64
- .byte -48
- .byte -32
- .byte -16
- .byte 0
- .byte 16
- .byte 32
- .byte 48
- .byte 64
- .byte 80
- .byte 96
- .byte 112
- .byte -128
- .byte -120
- .byte -112
- .byte -104
- .byte -96
- .byte -88
- .byte -80
- .byte -72
- .byte -64
- .byte -56
- .byte -48
- .byte -40
- .byte -32
- .byte -24
- .byte -16
- .byte -8
- .byte 0
- .byte 8
- .byte 16
- .byte 24
- .byte 32
- .byte 40
- .byte 48
- .byte 56
- .byte 64
- .byte 72
- .byte 80
- .byte 88
- .byte 96
- .byte 104
- .byte 112
- .byte 120
- .byte -128
- .byte -124
- .byte -120
- .byte -116
- .byte -112
- .byte -108
- .byte -104
- .byte -100
- .byte -96
- .byte -92
- .byte -88
- .byte -84
- .byte -80
- .byte -76
- .byte -72
- .byte -68
- .byte -64
- .byte -60
- .byte -56
- .byte -52
- .byte -48
- .byte -44
- .byte -40
- .byte -36
- .byte -32
- .byte -28
- .byte -24
- .byte -20
- .byte -16
- .byte -12
- .byte -8
- .byte -4
- .byte 0
- .byte 4
- .byte 8
- .byte 12
- .byte 16
- .byte 20
- .byte 24
- .byte 28
- .byte 32
- .byte 36
- .byte 40
- .byte 44
- .byte 48
- .byte 52
- .byte 56
- .byte 60
- .byte 64
- .byte 68
- .byte 72
- .byte 76
- .byte 80
- .byte 84
- .byte 88
- .byte 92
- .byte 96
- .byte 100
- .byte 104
- .byte 108
- .byte 112
- .byte 116
- .byte 120
- .byte 124
- .byte -128
-/* 1/64 .. 1/127, normalized. There is an implicit leading 1 in bit 32. */
- .balign 4
-zero_l:
- .long 0x0
- .long 0xF81F81F9
- .long 0xF07C1F08
- .long 0xE9131AC0
- .long 0xE1E1E1E2
- .long 0xDAE6076C
- .long 0xD41D41D5
- .long 0xCD856891
- .long 0xC71C71C8
- .long 0xC0E07039
- .long 0xBACF914D
- .long 0xB4E81B4F
- .long 0xAF286BCB
- .long 0xA98EF607
- .long 0xA41A41A5
- .long 0x9EC8E952
- .long 0x9999999A
- .long 0x948B0FCE
- .long 0x8F9C18FA
- .long 0x8ACB90F7
- .long 0x86186187
- .long 0x81818182
- .long 0x7D05F418
- .long 0x78A4C818
- .long 0x745D1746
- .long 0x702E05C1
- .long 0x6C16C16D
- .long 0x68168169
- .long 0x642C8591
- .long 0x60581606
- .long 0x5C9882BA
- .long 0x58ED2309
-div_table_inv:
- .long 0x55555556
- .long 0x51D07EAF
- .long 0x4E5E0A73
- .long 0x4AFD6A06
- .long 0x47AE147B
- .long 0x446F8657
- .long 0x41414142
- .long 0x3E22CBCF
- .long 0x3B13B13C
- .long 0x38138139
- .long 0x3521CFB3
- .long 0x323E34A3
- .long 0x2F684BDB
- .long 0x2C9FB4D9
- .long 0x29E4129F
- .long 0x27350B89
- .long 0x24924925
- .long 0x21FB7813
- .long 0x1F7047DD
- .long 0x1CF06ADB
- .long 0x1A7B9612
- .long 0x18118119
- .long 0x15B1E5F8
- .long 0x135C8114
- .long 0x11111112
- .long 0xECF56BF
- .long 0xC9714FC
- .long 0xA6810A7
- .long 0x8421085
- .long 0x624DD30
- .long 0x4104105
- .long 0x2040811
- /* maximum error: 0.987342 scaled: 0.921875*/
diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile
deleted file mode 100644
index ba06e42c4a58c9..00000000000000
--- a/arch/sh/math-emu/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := math.o
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
deleted file mode 100644
index cdaef6501d764a..00000000000000
--- a/arch/sh/math-emu/math.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * arch/sh/math-emu/math.c
- *
- * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/sched/signal.h>
-#include <linux/signal.h>
-#include <linux/perf_event.h>
-
-#include <linux/uaccess.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include "sfp-util.h"
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-#include <math-emu/double.h>
-
-#define FPUL (fregs->fpul)
-#define FPSCR (fregs->fpscr)
-#define FPSCR_RM (FPSCR&3)
-#define FPSCR_DN ((FPSCR>>18)&1)
-#define FPSCR_PR ((FPSCR>>19)&1)
-#define FPSCR_SZ ((FPSCR>>20)&1)
-#define FPSCR_FR ((FPSCR>>21)&1)
-#define FPSCR_MASK 0x003fffffUL
-
-#define BANK(n) (n^(FPSCR_FR?16:0))
-#define FR ((unsigned long*)(fregs->fp_regs))
-#define FR0 (FR[BANK(0)])
-#define FRn (FR[BANK(n)])
-#define FRm (FR[BANK(m)])
-#define DR ((unsigned long long*)(fregs->fp_regs))
-#define DRn (DR[BANK(n)/2])
-#define DRm (DR[BANK(m)/2])
-
-#define XREG(n) (n^16)
-#define XFn (FR[BANK(XREG(n))])
-#define XFm (FR[BANK(XREG(m))])
-#define XDn (DR[BANK(XREG(n))/2])
-#define XDm (DR[BANK(XREG(m))/2])
-
-#define R0 (regs->regs[0])
-#define Rn (regs->regs[n])
-#define Rm (regs->regs[m])
-
-#define MWRITE(d,a) ({if(put_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-#define MREAD(d,a) ({if(get_user(d, (typeof (d) __user *)a)) return -EFAULT;})
-
-#define PACK_S(r,f) FP_PACK_SP(&r,f)
-#define UNPACK_S(f,r) FP_UNPACK_SP(f,&r)
-#define PACK_D(r,f) \
- {u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
-#define UNPACK_D(f,r) \
- {u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
-
-// 2 args instructions.
-#define BOTH_PRmn(op,x) \
- FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
-
-#define CMP_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
-#define EQ_X(SZ,R,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
-#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
-
-static int
-fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP) > 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
-
- return 0;
-}
-
-static int
-fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- if (CMP(CMP /*EQ*/) == 0)
- regs->sr |= 1;
- else
- regs->sr &= ~1;
- return 0;
-}
-
-#define ARITH_X(SZ,OP,M,N) do{ \
- FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
- UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
- FP_##OP##_##SZ(Fr, Fn, Fm); \
- PACK_##SZ(N, Fr); }while(0)
-
-static int
-fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, ADD);
- return 0;
-}
-
-static int
-fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, SUB);
- return 0;
-}
-
-static int
-fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, MUL);
- return 0;
-}
-
-static int
-fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- BOTH_PRmn(ARITH_X, DIV);
- return 0;
-}
-
-static int
-fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fr);
- FP_DECL_S(Ft);
- FP_DECL_S(F0);
- FP_DECL_S(Fm);
- FP_DECL_S(Fn);
- UNPACK_S(F0, FR0);
- UNPACK_S(Fm, FRm);
- UNPACK_S(Fn, FRn);
- FP_MUL_S(Ft, Fm, F0);
- FP_ADD_S(Fr, Fn, Ft);
- PACK_S(FRn, Fr);
- return 0;
-}
-
-// to process fmov's extension (odd n for DR access XD).
-#define FMOV_EXT(x) if(x&1) x+=16-1
-
-static int
-fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + R0 + 4);
- n++;
- MREAD(FRn, Rm + R0);
- } else {
- MREAD(FRn, Rm + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- } else {
- MREAD(FRn, Rm);
- }
-
- return 0;
-}
-
-static int
-fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(n);
- MREAD(FRn, Rm + 4);
- n++;
- MREAD(FRn, Rm);
- Rm += 8;
- } else {
- MREAD(FRn, Rm);
- Rm += 4;
- }
-
- return 0;
-}
-
-static int
-fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + R0 + 4);
- m++;
- MWRITE(FRm, Rn + R0);
- } else {
- MWRITE(FRm, Rn + R0);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- Rn -= 8;
- MWRITE(FRm, Rn + 4);
- m++;
- MWRITE(FRm, Rn);
- } else {
- Rn -= 4;
- MWRITE(FRm, Rn);
- }
-
- return 0;
-}
-
-static int
-fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
- int n)
-{
- if (FPSCR_SZ) {
- FMOV_EXT(m);
- FMOV_EXT(n);
- DRn = DRm;
- } else {
- FRn = FRm;
- }
-
- return 0;
-}
-
-static int
-fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
-{
- return -EINVAL;
-}
-
-// 1 arg instructions.
-#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
- { printk( #i " not yet done.\n"); return 0; }
-
-NOTYETn(ftrv)
-NOTYETn(fsqrt)
-NOTYETn(fipr)
-NOTYETn(fsca)
-NOTYETn(fsrra)
-
-#define EMU_FLOAT_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
- PACK_##SZ(N, Fn); }while(0)
-static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FLOAT_X(D, DRn);
- else
- EMU_FLOAT_X(S, FRn);
-
- return 0;
-}
-
-#define EMU_FTRC_X(SZ,N) do { \
- FP_DECL_##SZ(Fn); \
- UNPACK_##SZ(Fn, N); \
- FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
-static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
-
- if (FPSCR_PR)
- EMU_FTRC_X(D, DRn);
- else
- EMU_FTRC_X(S, FRn);
-
- return 0;
-}
-
-static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_S(Fn);
- FP_DECL_D(Fr);
- UNPACK_S(Fn, FPUL);
- FP_CONV(D, S, 2, 1, Fr, Fn);
- PACK_D(DRn, Fr);
- return 0;
-}
-
-static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FP_DECL_EX;
- FP_DECL_D(Fn);
- FP_DECL_S(Fr);
- UNPACK_D(Fn, DRn);
- FP_CONV(S, D, 1, 2, Fr, Fn);
- PACK_S(FPUL, Fr);
- return 0;
-}
-
-static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
-{
- FPSCR ^= flag;
- return 0;
-}
-
-static int fsts(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = FPUL;
- return 0;
-}
-
-static int flds(struct sh_fpu_soft_struct *fregs, int n)
-{
- FPUL = FRn;
- return 0;
-}
-
-static int fneg(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fabs(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
- return 0;
-}
-
-static int fld0(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = 0;
- return 0;
-}
-
-static int fld1(struct sh_fpu_soft_struct *fregs, int n)
-{
- FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
- return 0;
-}
-
-static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
-{
- return -EINVAL;
-}
-
-/// Instruction decoders.
-
-static int id_fxfd(struct sh_fpu_soft_struct *, int);
-static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
-
-static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
- fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
- fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
-};
-
-static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
- fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
- fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
- fmov_reg_reg, id_fnxd, fmac, fnop_mn};
-
-static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
-{
- const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
- switch (x & 3) {
- case 3:
- fxchg(fregs, flag[x >> 2]);
- break;
- case 1:
- ftrv(fregs, x - 1);
- break;
- default:
- fsca(fregs, x);
- }
- return 0;
-}
-
-static int
-id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
-{
- return (fnxd[x])(fregs, n);
-}
-
-static int
-id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
- return (fnmx[x])(fregs, regs, m, n);
-}
-
-static int
-id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
-{
- int n = ((code >> 8) & 0xf);
- unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
-
- switch (code & 0xf0ff) {
- case 0x005a:
- case 0x006a:
- Rn = *reg;
- break;
- case 0x405a:
- case 0x406a:
- *reg = Rn;
- break;
- case 0x4052:
- case 0x4062:
- Rn -= 4;
- MWRITE(*reg, Rn);
- break;
- case 0x4056:
- case 0x4066:
- MREAD(*reg, Rn);
- Rn += 4;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
-{
- if ((code & 0xf000) == 0xf000)
- return id_fnmx(fregs, regs, code);
- else
- return id_sys(fregs, regs, code);
-}
-
-/**
- * fpu_init - Initialize FPU registers
- * @fpu: Pointer to software emulated FPU registers.
- */
-static void fpu_init(struct sh_fpu_soft_struct *fpu)
-{
- int i;
-
- fpu->fpscr = FPSCR_INIT;
- fpu->fpul = 0;
-
- for (i = 0; i < 16; i++) {
- fpu->fp_regs[i] = 0;
- fpu->xfp_regs[i]= 0;
- }
-}
-
-/**
- * do_fpu_inst - Handle reserved instructions for FPU emulation
- * @inst: instruction code.
- * @regs: registers on stack.
- */
-int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
- struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
-
- perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
-
- if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
- /* initialize once. */
- fpu_init(fpu);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- }
-
- return fpu_emulate(inst, fpu, regs);
-}
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
deleted file mode 100644
index 784f541344f36d..00000000000000
--- a/arch/sh/math-emu/sfp-util.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * These are copied from glibc/stdlib/longlong.h
- */
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) + (bl); \
- (sh) = (ah) + (bh) + (__x < (al)); \
- (sl) = __x; \
- } while (0)
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
- do { \
- UWtype __x; \
- __x = (al) - (bl); \
- (sh) = (ah) - (bh) - (__x > (al)); \
- (sl) = __x; \
- } while (0)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
- : "=r" ((u32)(w1)), "=r" ((u32)(w0)) \
- : "r" ((u32)(u)), "r" ((u32)(v)) \
- : "macl", "mach")
-
-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-#define udiv_qrnnd(q, r, n1, n0, d) \
- do { \
- UWtype __d1, __d0, __q1, __q0; \
- UWtype __r1, __r0, __m; \
- __d1 = __ll_highpart (d); \
- __d0 = __ll_lowpart (d); \
- \
- __r1 = (n1) % __d1; \
- __q1 = (n1) / __d1; \
- __m = (UWtype) __q1 * __d0; \
- __r1 = __r1 * __ll_B | __ll_highpart (n0); \
- if (__r1 < __m) \
- { \
- __q1--, __r1 += (d); \
- if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
- if (__r1 < __m) \
- __q1--, __r1 += (d); \
- } \
- __r1 -= __m; \
- \
- __r0 = __r1 % __d1; \
- __q0 = __r1 / __d1; \
- __m = (UWtype) __q0 * __d0; \
- __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
- if (__r0 < __m) \
- { \
- __q0--, __r0 += (d); \
- if (__r0 >= (d)) \
- if (__r0 < __m) \
- __q0--, __r0 += (d); \
- } \
- __r0 -= __m; \
- \
- (q) = (UWtype) __q1 * __ll_B | __q0; \
- (r) = __r0; \
- } while (0)
-
-#define abort() return 0
-
-#define __BYTE_ORDER __LITTLE_ENDIAN
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
deleted file mode 100644
index 411fdc0901f7ea..00000000000000
--- a/arch/sh/mm/Kconfig
+++ /dev/null
@@ -1,254 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "Memory management options"
-
-config MMU
- bool "Support for memory management hardware"
- depends on !CPU_SH2
- default y
- help
- Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
- boot on these systems, this option must not be set.
-
- On other systems (such as the SH-3 and 4) where an MMU exists,
- turning this off will boot the kernel on these machines with the
- MMU implicitly switched off.
-
-config PAGE_OFFSET
- hex
- default "0x80000000" if MMU
- default "0x00000000"
-
-config ARCH_FORCE_MAX_ORDER
- int "Maximum zone order"
- range 9 64 if PAGE_SIZE_16KB
- default "9" if PAGE_SIZE_16KB
- range 7 64 if PAGE_SIZE_64KB
- default "7" if PAGE_SIZE_64KB
- range 11 64
- default "14" if !MMU
- default "11"
- help
- The kernel memory allocator divides physically contiguous memory
- blocks into "zones", where each zone is a power of two number of
- pages. This option selects the largest power of two that the kernel
- keeps in the memory allocator. If you need to allocate very large
- blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
-
- The page size is not necessarily 4KB. Keep this in mind when
- choosing a value for this option.
-
-config MEMORY_START
- hex "Physical memory start address"
- default "0x08000000"
- help
- Computers built with Hitachi SuperH processors always
- map the ROM starting at address zero. But the processor
- does not specify the range that RAM takes.
-
- The physical memory (RAM) start address will be automatically
- set to 08000000. Other platforms, such as the Solution Engine
- boards typically map RAM at 0C000000.
-
- Tweak this only when porting to a new machine which does not
- already have a defconfig. Changing it from the known correct
- value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
- hex "Physical memory size"
- default "0x04000000"
- help
- This sets the default memory size assumed by your SH kernel. It can
- be overridden as normal by the 'mem=' argument on the kernel command
- line. If unsure, consult your board specifications or just leave it
- as 0x04000000 which was the default value before this became
- configurable.
-
-# Physical addressing modes
-
-config 29BIT
- def_bool !32BIT
- select UNCACHED_MAPPING
-
-config 32BIT
- bool
- default !MMU
-
-config PMB
- bool "Support 32-bit physical addressing through PMB"
- depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
- select 32BIT
- select UNCACHED_MAPPING
- help
- If you say Y here, physical addressing will be extended to
- 32-bits through the SH-4A PMB. If this is not set, legacy
- 29-bit physical addressing will be used.
-
-config X2TLB
- def_bool y
- depends on (CPU_SHX2 || CPU_SHX3) && MMU
-
-config VSYSCALL
- bool "Support vsyscall page"
- depends on MMU && (CPU_SH3 || CPU_SH4)
- default y
- help
- This will enable support for the kernel mapping a vDSO page
- in process space, and subsequently handing down the entry point
- to the libc through the ELF auxiliary vector.
-
- From the kernel side this is used for the signal trampoline.
- For systems with an MMU that can afford to give up a page,
- (the default value) say Y.
-
-config NUMA
- bool "Non-Uniform Memory Access (NUMA) Support"
- depends on MMU && SYS_SUPPORTS_NUMA
- select ARCH_WANT_NUMA_VARIABLE_LOCALITY
- default n
- help
- Some SH systems have many various memories scattered around
- the address space, each with varying latencies. This enables
- support for these blocks by binding them to nodes and allowing
- memory policies to be used for prioritizing and controlling
- allocation behaviour.
-
-config NODES_SHIFT
- int
- default "3" if CPU_SUBTYPE_SHX3
- default "1"
- depends on NUMA
-
-config ARCH_FLATMEM_ENABLE
- def_bool y
- depends on !NUMA
-
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
-config ARCH_SPARSEMEM_DEFAULT
- def_bool y
-
-config ARCH_SELECT_MEMORY_MODEL
- def_bool y
-
-config ARCH_MEMORY_PROBE
- def_bool y
- depends on MEMORY_HOTPLUG
-
-config IOREMAP_FIXED
- def_bool y
- depends on X2TLB
-
-config UNCACHED_MAPPING
- bool
-
-config HAVE_SRAM_POOL
- bool
- select GENERIC_ALLOCATOR
-
-choice
- prompt "Kernel page size"
- default PAGE_SIZE_4KB
-
-config PAGE_SIZE_4KB
- bool "4kB"
- help
- This is the default page size used by all SuperH CPUs.
-
-config PAGE_SIZE_8KB
- bool "8kB"
- depends on !MMU || X2TLB
- help
- This enables 8kB pages as supported by SH-X2 and later MMUs.
-
-config PAGE_SIZE_16KB
- bool "16kB"
- depends on !MMU
- help
- This enables 16kB pages on MMU-less SH systems.
-
-config PAGE_SIZE_64KB
- bool "64kB"
- depends on !MMU || CPU_SH4
- help
- This enables support for 64kB pages, possible on all SH-4
- CPUs and later.
-
-endchoice
-
-choice
- prompt "HugeTLB page size"
- depends on HUGETLB_PAGE
- default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
- default HUGETLB_PAGE_SIZE_64K
-
-config HUGETLB_PAGE_SIZE_64K
- bool "64kB"
- depends on !PAGE_SIZE_64KB
-
-config HUGETLB_PAGE_SIZE_256K
- bool "256kB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_1MB
- bool "1MB"
-
-config HUGETLB_PAGE_SIZE_4MB
- bool "4MB"
- depends on X2TLB
-
-config HUGETLB_PAGE_SIZE_64MB
- bool "64MB"
- depends on X2TLB
-
-endchoice
-
-config SCHED_MC
- bool "Multi-core scheduler support"
- depends on SMP
- default y
- help
- Multi-core scheduler support improves the CPU scheduler's decision
- making when dealing with multi-core CPU chips at a cost of slightly
- increased overhead in some places. If unsure say N here.
-
-endmenu
-
-menu "Cache configuration"
-
-config SH7705_CACHE_32KB
- bool "Enable 32KB cache size for SH7705"
- depends on CPU_SUBTYPE_SH7705
- default y
-
-choice
- prompt "Cache mode"
- default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
- default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
-
-config CACHE_WRITEBACK
- bool "Write-back"
-
-config CACHE_WRITETHROUGH
- bool "Write-through"
- help
- Selecting this option will configure the caches in write-through
- mode, as opposed to the default write-back configuration.
-
- Since there's sill some aliasing issues on SH-4, this option will
- unfortunately still require the majority of flushing functions to
- be implemented to deal with aliasing.
-
- If unsure, say N.
-
-config CACHE_OFF
- bool "Off"
-
-endchoice
-
-endmenu
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
deleted file mode 100644
index f69ddc70b14658..00000000000000
--- a/arch/sh/mm/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y := alignment.o cache.o init.o consistent.o mmap.o
-
-cacheops-$(CONFIG_CPU_J2) := cache-j2.o
-cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o
-cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o
-cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o
-cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
-cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o
-
-obj-y += $(cacheops-y)
-
-mmu-y := nommu.o extable_32.o
-mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \
- pgtable.o tlbex_32.o tlbflush_32.o
-
-obj-y += $(mmu-y)
-
-debugfs-y := asids-debugfs.o
-ifndef CONFIG_CACHE_OFF
-debugfs-$(CONFIG_CPU_SH4) += cache-debugfs.o
-endif
-
-ifdef CONFIG_MMU
-debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o
-tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o
-obj-y += $(tlb-y)
-endif
-
-obj-$(CONFIG_DEBUG_FS) += $(debugfs-y)
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PMB) += pmb.o
-obj-$(CONFIG_NUMA) += numa.o
-obj-$(CONFIG_IOREMAP_FIXED) += ioremap_fixed.o
-obj-$(CONFIG_UNCACHED_MAPPING) += uncached.o
-obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
-
-GCOV_PROFILE_pmb.o := n
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
deleted file mode 100644
index 3a76a766f4232c..00000000000000
--- a/arch/sh/mm/alignment.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Alignment access counters and corresponding user-space interfaces.
- *
- * Copyright (C) 2009 ST Microelectronics
- * Copyright (C) 2009 - 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-#include <linux/ratelimit.h>
-#include <asm/alignment.h>
-#include <asm/processor.h>
-
-static unsigned long se_user;
-static unsigned long se_sys;
-static unsigned long se_half;
-static unsigned long se_word;
-static unsigned long se_dword;
-static unsigned long se_multi;
-/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
- valid! */
-static int se_usermode = UM_WARN | UM_FIXUP;
-/* 0: no warning 1: print a warning message, disabled by default */
-static int se_kernmode_warn;
-
-core_param(alignment, se_usermode, int, 0600);
-
-void inc_unaligned_byte_access(void)
-{
- se_half++;
-}
-
-void inc_unaligned_word_access(void)
-{
- se_word++;
-}
-
-void inc_unaligned_dword_access(void)
-{
- se_dword++;
-}
-
-void inc_unaligned_multi_access(void)
-{
- se_multi++;
-}
-
-void inc_unaligned_user_access(void)
-{
- se_user++;
-}
-
-void inc_unaligned_kernel_access(void)
-{
- se_sys++;
-}
-
-/*
- * This defaults to the global policy which can be set from the command
- * line, while processes can overload their preferences via prctl().
- */
-unsigned int unaligned_user_action(void)
-{
- unsigned int action = se_usermode;
-
- if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
- action &= ~UM_FIXUP;
- action |= UM_SIGNAL;
- }
-
- if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
- action &= ~UM_WARN;
-
- return action;
-}
-
-int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
-{
- return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
- (unsigned int __user *)addr);
-}
-
-int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
-{
- tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
- (val & SH_THREAD_UAC_MASK);
- return 0;
-}
-
-void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
- struct pt_regs *regs)
-{
- if (user_mode(regs) && (se_usermode & UM_WARN))
- pr_notice_ratelimited("Fixing up unaligned userspace access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
- else if (se_kernmode_warn)
- pr_notice_ratelimited("Fixing up unaligned kernel access "
- "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- tsk->comm, task_pid_nr(tsk),
- (void *)instruction_pointer(regs), insn);
-}
-
-static const char *se_usermode_action[] = {
- "ignored",
- "warn",
- "fixup",
- "fixup+warn",
- "signal",
- "signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "User:\t\t%lu\n", se_user);
- seq_printf(m, "System:\t\t%lu\n", se_sys);
- seq_printf(m, "Half:\t\t%lu\n", se_half);
- seq_printf(m, "Word:\t\t%lu\n", se_word);
- seq_printf(m, "DWord:\t\t%lu\n", se_dword);
- seq_printf(m, "Multi:\t\t%lu\n", se_multi);
- seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
- se_usermode_action[se_usermode]);
- seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
- se_kernmode_warn ? "+warn" : "");
- return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file,
- const char __user *buffer, size_t count, loff_t *pos)
-{
- int *data = pde_data(file_inode(file));
- char mode;
-
- if (count > 0) {
- if (get_user(mode, buffer))
- return -EFAULT;
- if (mode >= '0' && mode <= '5')
- *data = mode - '0';
- }
- return count;
-}
-
-static const struct proc_ops alignment_proc_ops = {
- .proc_open = alignment_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = alignment_proc_write,
-};
-
-/*
- * This needs to be done after sysctl_init_bases(), otherwise sys/ will be
- * overwritten. Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
- struct proc_dir_entry *dir, *res;
-
- dir = proc_mkdir("cpu", NULL);
- if (!dir)
- return -ENOMEM;
-
- res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_usermode);
- if (!res)
- return -ENOMEM;
-
- res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_ops, &se_kernmode_warn);
- if (!res)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(alignment_init);
diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c
deleted file mode 100644
index d16d6f5ec77499..00000000000000
--- a/arch/sh/mm/asids-debugfs.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * debugfs ops for process ASIDs
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2008 Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- * Provides a debugfs file that lists out the ASIDs currently associated
- * with the processes.
- *
- * In the SH-5 case, if the DM.PC register is examined through the debug
- * link, this shows ASID + PC. To make use of this, the PID->ASID
- * relationship needs to be known. This is primarily for debugging.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/task.h>
-
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-
-static int asids_debugfs_show(struct seq_file *file, void *iter)
-{
- struct task_struct *p;
-
- read_lock(&tasklist_lock);
-
- for_each_process(p) {
- int pid = p->pid;
-
- if (unlikely(!pid))
- continue;
-
- if (p->mm)
- seq_printf(file, "%5d : %04lx\n", pid,
- cpu_asid(smp_processor_id(), p->mm));
- }
-
- read_unlock(&tasklist_lock);
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(asids_debugfs);
-
-static int __init asids_debugfs_init(void)
-{
- debugfs_create_file("asids", S_IRUSR, arch_debugfs_dir, NULL,
- &asids_debugfs_fops);
- return 0;
-}
-device_initcall(asids_debugfs_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
deleted file mode 100644
index b0f185169dfa0c..00000000000000
--- a/arch/sh/mm/cache-debugfs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * debugfs ops for the L1 cache
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-enum cache_type {
- CACHE_TYPE_ICACHE,
- CACHE_TYPE_DCACHE,
- CACHE_TYPE_UNIFIED,
-};
-
-static int cache_debugfs_show(struct seq_file *file, void *iter)
-{
- unsigned int cache_type = (unsigned int)file->private;
- struct cache_info *cache;
- unsigned int waysize, way;
- unsigned long ccr;
- unsigned long addrstart = 0;
-
- /*
- * Go uncached immediately so we don't skew the results any
- * more than we already are..
- */
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- if ((ccr & CCR_CACHE_ENABLE) == 0) {
- back_to_cached();
-
- seq_printf(file, "disabled\n");
- return 0;
- }
-
- if (cache_type == CACHE_TYPE_DCACHE) {
- addrstart = CACHE_OC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.dcache;
- } else {
- addrstart = CACHE_IC_ADDRESS_ARRAY;
- cache = ¤t_cpu_data.icache;
- }
-
- waysize = cache->sets;
-
- /*
- * If the OC is already in RAM mode, we only have
- * half of the entries to consider..
- */
- if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
- waysize >>= 1;
-
- waysize <<= cache->entry_shift;
-
- for (way = 0; way < cache->ways; way++) {
- unsigned long addr;
- unsigned int line;
-
- seq_printf(file, "-----------------------------------------\n");
- seq_printf(file, "Way %d\n", way);
- seq_printf(file, "-----------------------------------------\n");
-
- for (addr = addrstart, line = 0;
- addr < addrstart + waysize;
- addr += cache->linesz, line++) {
- unsigned long data = __raw_readl(addr);
-
- /* Check the V bit, ignore invalid cachelines */
- if ((data & 1) == 0)
- continue;
-
- /* U: Dirty, cache tag is 10 bits up */
- seq_printf(file, "%3d: %c 0x%lx\n",
- line, data & 2 ? 'U' : ' ',
- data & 0x1ffffc00);
- }
-
- addrstart += cache->way_incr;
- }
-
- back_to_cached();
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(cache_debugfs);
-
-static int __init cache_debugfs_init(void)
-{
- debugfs_create_file("dcache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_DCACHE, &cache_debugfs_fops);
- debugfs_create_file("icache", S_IRUSR, arch_debugfs_dir,
- (void *)CACHE_TYPE_ICACHE, &cache_debugfs_fops);
- return 0;
-}
-module_init(cache_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/cache-j2.c b/arch/sh/mm/cache-j2.c
deleted file mode 100644
index f277862a11f530..00000000000000
--- a/arch/sh/mm/cache-j2.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-j2.c
- *
- * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/cpumask.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-#define ICACHE_ENABLE 0x1
-#define DCACHE_ENABLE 0x2
-#define CACHE_ENABLE (ICACHE_ENABLE | DCACHE_ENABLE)
-#define ICACHE_FLUSH 0x100
-#define DCACHE_FLUSH 0x200
-#define CACHE_FLUSH (ICACHE_FLUSH | DCACHE_FLUSH)
-
-u32 __iomem *j2_ccr_base;
-
-static void j2_flush_icache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | ICACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_dcache(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | DCACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-static void j2_flush_both(void *args)
-{
- unsigned cpu;
- for_each_possible_cpu(cpu)
- __raw_writel(CACHE_ENABLE | CACHE_FLUSH, j2_ccr_base + cpu);
-}
-
-void __init j2_cache_init(void)
-{
- if (!j2_ccr_base)
- return;
-
- local_flush_cache_all = j2_flush_both;
- local_flush_cache_mm = j2_flush_both;
- local_flush_cache_dup_mm = j2_flush_both;
- local_flush_cache_page = j2_flush_both;
- local_flush_cache_range = j2_flush_both;
- local_flush_dcache_page = j2_flush_dcache;
- local_flush_icache_range = j2_flush_icache;
- local_flush_icache_page = j2_flush_icache;
- local_flush_cache_sigtramp = j2_flush_icache;
-
- pr_info("Initial J2 CCR is %.8x\n", __raw_readl(j2_ccr_base));
-}
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
deleted file mode 100644
index f2b6cdbdf9320d..00000000000000
--- a/arch/sh/mm/cache-sh2.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2.c
- *
- * Copyright (C) 2002 Paul Mundt
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-static void sh2__flush_wback_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
- int way;
- for (way = 0; way < 4; way++) {
- unsigned long data = __raw_readl(addr | (way << 12));
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr | (way << 12));
- }
- }
- }
-}
-
-static void sh2__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-}
-
-static void sh2__flush_invalidate_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- /*
- * SH-2 does not support individual line invalidation, only a
- * global invalidate.
- */
- unsigned long ccr;
- unsigned long flags;
- local_irq_save(flags);
- jump_to_uncached();
-
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_INVALIDATE;
- __raw_writel(ccr, SH_CCR);
-
- back_to_cached();
- local_irq_restore(flags);
-#else
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES)
- __raw_writel((v & CACHE_PHYSADDR_MASK),
- CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
-#endif
-}
-
-void __init sh2_cache_init(void)
-{
- __flush_wback_region = sh2__flush_wback_region;
- __flush_purge_region = sh2__flush_purge_region;
- __flush_invalidate_region = sh2__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
deleted file mode 100644
index 4f7739e707a7e9..00000000000000
--- a/arch/sh/mm/cache-sh2a.c
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh2a.c
- *
- * Copyright (C) 2008 Yoshinori Sato
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/cache.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_OCACHE_PAGES 32
-#define MAX_ICACHE_PAGES 32
-
-#ifdef CONFIG_CACHE_WRITEBACK
-static void sh2a_flush_oc_line(unsigned long v, int way)
-{
- unsigned long addr = (v & 0x000007f0) | (way << 11);
- unsigned long data;
-
- data = __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr);
- if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
- }
-}
-#endif
-
-static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
-{
- /* Set associative bit to hit all ways */
- unsigned long addr = (v & 0x000007f0) | SH_CACHE_ASSOC;
- __raw_writel((addr & CACHE_PHYSADDR_MASK), cache_addr | addr);
-}
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- */
-static void sh2a__flush_wback_region(void *start, int size)
-{
-#ifdef CONFIG_CACHE_WRITEBACK
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
- int nr_ways;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- nr_ways = current_cpu_data.dcache.ways;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then flush the entire cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- begin = CACHE_OC_ADDRESS_ARRAY;
- end = begin + (nr_ways * current_cpu_data.dcache.way_size);
-
- for (v = begin; v < end; v += L1_CACHE_BYTES) {
- unsigned long data = __raw_readl(v);
- if (data & SH_CACHE_UPDATED)
- __raw_writel(data & ~SH_CACHE_UPDATED, v);
- }
- } else {
- int way;
- for (way = 0; way < nr_ways; way++) {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_flush_oc_line(v, way);
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-#endif
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- */
-static void sh2a__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-#ifdef CONFIG_CACHE_WRITEBACK
- int way;
- int nr_ways = current_cpu_data.dcache.ways;
- for (way = 0; way < nr_ways; way++)
- sh2a_flush_oc_line(v, way);
-#endif
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Invalidate the D-caches, but no write back please
- */
-static void sh2a__flush_invalidate_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* If there are too many pages then just blow the cache */
- if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = begin; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- */
-static void sh2a_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long v;
- unsigned long flags;
-
- start = data->addr1 & ~(L1_CACHE_BYTES-1);
- end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
-
-#ifdef CONFIG_CACHE_WRITEBACK
- sh2a__flush_wback_region((void *)start, end-start);
-#endif
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* I-Cache invalidate */
- /* If there are too many pages then just blow the cache */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- __raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
- SH_CCR);
- } else {
- for (v = start; v < end; v += L1_CACHE_BYTES)
- sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-void __init sh2a_cache_init(void)
-{
- local_flush_icache_range = sh2a_flush_icache_range;
-
- __flush_wback_region = sh2a__flush_wback_region;
- __flush_purge_region = sh2a__flush_purge_region;
- __flush_invalidate_region = sh2a__flush_invalidate_region;
-}
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
deleted file mode 100644
index bc595982d396ee..00000000000000
--- a/arch/sh/mm/cache-sh3.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache-sh3.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * Is this really worth it, or should we just alias this routine
- * to __flush_purge_region too?
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-
-static void sh3__flush_wback_region(void *start, int size)
-{
- unsigned long v, j;
- unsigned long begin, end;
- unsigned long flags;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY;
- for (j = 0; j < current_cpu_data.dcache.ways; j++) {
- unsigned long data, addr, p;
-
- p = __pa(v);
- addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
- local_irq_save(flags);
- data = __raw_readl(addr);
-
- if ((data & CACHE_PHYSADDR_MASK) ==
- (p & CACHE_PHYSADDR_MASK)) {
- data &= ~SH_CACHE_UPDATED;
- __raw_writel(data, addr);
- local_irq_restore(flags);
- break;
- }
- local_irq_restore(flags);
- addrstart += current_cpu_data.dcache.way_incr;
- }
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh3__flush_purge_region(void *start, int size)
-{
- unsigned long v;
- unsigned long begin, end;
-
- begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
- end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
-
- for (v = begin; v < end; v+=L1_CACHE_BYTES) {
- unsigned long data, addr;
-
- data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
- addr = CACHE_OC_ADDRESS_ARRAY |
- (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
- __raw_writel(data, addr);
- }
-}
-
-void __init sh3_cache_init(void)
-{
- __flush_wback_region = sh3__flush_wback_region;
- __flush_purge_region = sh3__flush_purge_region;
-
- /*
- * No write back please
- *
- * Except I don't think there's any way to avoid the writeback.
- * So we just alias it to sh3__flush_purge_region(). dwmw2.
- */
- __flush_invalidate_region = sh3__flush_purge_region;
-}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
deleted file mode 100644
index 72c2e1b46c0838..00000000000000
--- a/arch/sh/mm/cache-sh4.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * arch/sh/mm/cache-sh4.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001 - 2009 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-
-/*
- * The maximum number of pages we support up to when doing ranged dcache
- * flushing. Anything exceeding this will simply flush the dcache in its
- * entirety.
- */
-#define MAX_ICACHE_PAGES 32
-
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset);
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format,
- * signal handler code and kprobes code
- */
-static void sh4_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
- unsigned long flags, v;
- int i;
-
- start = data->addr1;
- end = data->addr2;
-
- /* If there are too many pages then just blow away the caches */
- if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
- local_flush_cache_all(NULL);
- return;
- }
-
- /*
- * Selectively flush d-cache then invalidate the i-cache.
- * This is inefficient, so only use this for small ranges.
- */
- start &= ~(L1_CACHE_BYTES-1);
- end += L1_CACHE_BYTES-1;
- end &= ~(L1_CACHE_BYTES-1);
-
- local_irq_save(flags);
- jump_to_uncached();
-
- for (v = start; v < end; v += L1_CACHE_BYTES) {
- unsigned long icacheaddr;
- int j, n;
-
- __ocbwb(v);
-
- icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
- cpu_data->icache.entry_mask);
-
- /* Clear i-cache line valid-bit */
- n = boot_cpu_data.icache.n_aliases;
- for (i = 0; i < cpu_data->icache.ways; i++) {
- for (j = 0; j < n; j++)
- __raw_writel(0, icacheaddr + (j * PAGE_SIZE));
- icacheaddr += cpu_data->icache.way_incr;
- }
- }
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static inline void flush_cache_one(unsigned long start, unsigned long phys)
-{
- unsigned long flags, exec_offset = 0;
-
- /*
- * All types of SH-4 require PC to be uncached to operate on the I-cache.
- * Some types of SH-4 require PC to be uncached to operate on the D-cache.
- */
- if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
- (start < CACHE_OC_ADDRESS_ARRAY))
- exec_offset = cached_to_uncached;
-
- local_irq_save(flags);
- __flush_cache_one(start, phys, exec_offset);
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh4_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- unsigned long addr = (unsigned long)page_address(page);
-#ifndef CONFIG_SMP
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
-#endif
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (addr & shm_align_mask), page_to_phys(page));
-
- wmb();
-}
-
-/* TODO: Selective icache invalidation through IC address array.. */
-static void flush_icache_all(void)
-{
- unsigned long flags, ccr;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- /* Flush I-cache */
- ccr = __raw_readl(SH_CCR);
- ccr |= CCR_CACHE_ICI;
- __raw_writel(ccr, SH_CCR);
-
- /*
- * back_to_cached() will take care of the barrier for us, don't add
- * another one!
- */
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-static void flush_dcache_all(void)
-{
- unsigned long addr, end_addr, entry_offset;
-
- end_addr = CACHE_OC_ADDRESS_ARRAY +
- (current_cpu_data.dcache.sets <<
- current_cpu_data.dcache.entry_shift) *
- current_cpu_data.dcache.ways;
-
- entry_offset = 1 << current_cpu_data.dcache.entry_shift;
-
- for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- __raw_writel(0, addr); addr += entry_offset;
- }
-}
-
-static void sh4_flush_cache_all(void *unused)
-{
- flush_dcache_all();
- flush_icache_all();
-}
-
-/*
- * Note : (RPC) since the caches are physically tagged, the only point
- * of flush_cache_mm for SH-4 is to get rid of aliases from the
- * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that
- * lines can stay resident so long as the virtual address they were
- * accessed with (hence cache set) is in accord with the physical
- * address (i.e. tag). It's no different here.
- *
- * Caller takes mm->mmap_lock.
- */
-static void sh4_flush_cache_mm(void *arg)
-{
- struct mm_struct *mm = arg;
-
- if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
- return;
-
- flush_dcache_all();
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDR: Virtual Address (U0 address)
- * PFN: Physical page number
- */
-static void sh4_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- struct page *page;
- unsigned long address, pfn, phys;
- int map_coherent = 0;
- pmd_t *pmd;
- pte_t *pte;
- void *vaddr;
-
- vma = data->vma;
- address = data->addr1 & PAGE_MASK;
- pfn = data->addr2;
- phys = pfn << PAGE_SHIFT;
- page = pfn_to_page(pfn);
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- pmd = pmd_off(vma->vm_mm, address);
- pte = pte_offset_kernel(pmd, address);
-
- /* If the page isn't present, there is nothing to do here. */
- if (!(pte_val(*pte) & _PAGE_PRESENT))
- return;
-
- if ((vma->vm_mm == current->active_mm))
- vaddr = NULL;
- else {
- /*
- * Use kmap_coherent or kmap_atomic to do flushes for
- * another ASID than the current one.
- */
- map_coherent = (current_cpu_data.dcache.n_aliases &&
- test_bit(PG_dcache_clean, &page->flags) &&
- page_mapcount(page));
- if (map_coherent)
- vaddr = kmap_coherent(page, address);
- else
- vaddr = kmap_atomic(page);
-
- address = (unsigned long)vaddr;
- }
-
- flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
- (address & shm_align_mask), phys);
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-
- if (vaddr) {
- if (map_coherent)
- kunmap_coherent(vaddr);
- else
- kunmap_atomic(vaddr);
- }
-}
-
-/*
- * Write back and invalidate D-caches.
- *
- * START, END: Virtual Address (U0 address)
- *
- * NOTE: We need to flush the _physical_ page entry.
- * Flushing the cache lines for U0 only isn't enough.
- * We need to flush for P1 too, which may contain aliases.
- */
-static void sh4_flush_cache_range(void *args)
-{
- struct flusher_data *data = args;
- struct vm_area_struct *vma;
- unsigned long start, end;
-
- vma = data->vma;
- start = data->addr1;
- end = data->addr2;
-
- if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
- return;
-
- /*
- * If cache is only 4k-per-way, there are never any 'aliases'. Since
- * the cache is physically tagged, the data can just be left in there.
- */
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- flush_dcache_all();
-
- if (vma->vm_flags & VM_EXEC)
- flush_icache_all();
-}
-
-/**
- * __flush_cache_one
- *
- * @addr: address in memory mapped cache array
- * @phys: P1 address to flush (has to match tags if addr has 'A' bit
- * set i.e. associative write)
- * @exec_offset: set to 0x20000000 if flush has to be executed from P2
- * region else 0x0
- *
- * The offset into the cache array implied by 'addr' selects the
- * 'colour' of the virtual address range that will be flushed. The
- * operation (purge/write-back) is selected by the lower 2 bits of
- * 'phys'.
- */
-static void __flush_cache_one(unsigned long addr, unsigned long phys,
- unsigned long exec_offset)
-{
- int way_count;
- unsigned long base_addr = addr;
- struct cache_info *dcache;
- unsigned long way_incr;
- unsigned long a, ea, p;
- unsigned long temp_pc;
-
- dcache = &boot_cpu_data.dcache;
- /* Write this way for better assembly. */
- way_count = dcache->ways;
- way_incr = dcache->way_incr;
-
- /*
- * Apply exec_offset (i.e. branch to P2 if required.).
- *
- * FIXME:
- *
- * If I write "=r" for the (temp_pc), it puts this in r6 hence
- * trashing exec_offset before it's been added on - why? Hence
- * "=&r" as a 'workaround'
- */
- asm volatile("mov.l 1f, %0\n\t"
- "add %1, %0\n\t"
- "jmp @%0\n\t"
- "nop\n\t"
- ".balign 4\n\t"
- "1: .long 2f\n\t"
- "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
-
- /*
- * We know there will be >=1 iteration, so write as do-while to avoid
- * pointless nead-of-loop check for 0 iterations.
- */
- do {
- ea = base_addr + PAGE_SIZE;
- a = base_addr;
- p = phys;
-
- do {
- *(volatile unsigned long *)a = p;
- /*
- * Next line: intentionally not p+32, saves an add, p
- * will do since only the cache tag bits need to
- * match.
- */
- *(volatile unsigned long *)(a+32) = p;
- a += 64;
- p += 64;
- } while (a < ea);
-
- base_addr += way_incr;
- } while (--way_count != 0);
-}
-
-extern void __weak sh4__flush_region_init(void);
-
-/*
- * SH-4 has virtually indexed and physically tagged cache.
- */
-void __init sh4_cache_init(void)
-{
- printk("PVR=%08x CVR=%08x PRR=%08x\n",
- __raw_readl(CCN_PVR),
- __raw_readl(CCN_CVR),
- __raw_readl(CCN_PRR));
-
- local_flush_icache_range = sh4_flush_icache_range;
- local_flush_dcache_page = sh4_flush_dcache_page;
- local_flush_cache_all = sh4_flush_cache_all;
- local_flush_cache_mm = sh4_flush_cache_mm;
- local_flush_cache_dup_mm = sh4_flush_cache_mm;
- local_flush_cache_page = sh4_flush_cache_page;
- local_flush_cache_range = sh4_flush_cache_range;
-
- sh4__flush_region_init();
-}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
deleted file mode 100644
index 9b63a53a5e46fe..00000000000000
--- a/arch/sh/mm/cache-sh7705.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * arch/sh/mm/cache-sh7705.c
- *
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2004 Alex Song
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/pagemap.h>
-#include <linux/threads.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-/*
- * The 32KB cache on the SH7705 suffers from the same synonym problem
- * as SH4 CPUs
- */
-static inline void cache_wback_all(void)
-{
- unsigned long ways, waysize, addrstart;
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
- int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
-
- data = __raw_readl(addr);
-
- if ((data & v) == v)
- __raw_writel(data & ~v, addr);
-
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
- */
-static void sh7705_flush_icache_range(void *args)
-{
- struct flusher_data *data = args;
- unsigned long start, end;
-
- start = data->addr1;
- end = data->addr2;
-
- __flush_wback_region((void *)start, end - start);
-}
-
-/*
- * Writeback&Invalidate the D-cache of the page
- */
-static void __flush_dcache_page(unsigned long phys)
-{
- unsigned long ways, waysize, addrstart;
- unsigned long flags;
-
- phys |= SH_CACHE_VALID;
-
- /*
- * Here, phys is the physical address of the page. We check all the
- * tags in the cache for those with the same page number as this page
- * (by masking off the lowest 2 bits of the 19-bit tag; these bits are
- * derived from the offset within in the 4k page). Matching valid
- * entries are invalidated.
- *
- * Since 2 bits of the cache index are derived from the virtual page
- * number, knowing this would reduce the number of cache entries to be
- * searched by a factor of 4. However this function exists to deal with
- * potential cache aliasing, therefore the optimisation is probably not
- * possible.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- ways = current_cpu_data.dcache.ways;
- waysize = current_cpu_data.dcache.sets;
- waysize <<= current_cpu_data.dcache.entry_shift;
-
- addrstart = CACHE_OC_ADDRESS_ARRAY;
-
- do {
- unsigned long addr;
-
- for (addr = addrstart;
- addr < addrstart + waysize;
- addr += current_cpu_data.dcache.linesz) {
- unsigned long data;
-
- data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
- if (data == phys) {
- data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
- __raw_writel(data, addr);
- }
- }
-
- addrstart += current_cpu_data.dcache.way_incr;
- } while (--ways);
-
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back & invalidate the D-cache of the page.
- * (To avoid "alias" issues)
- */
-static void sh7705_flush_dcache_page(void *arg)
-{
- struct page *page = arg;
- struct address_space *mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else
- __flush_dcache_page(__pa(page_address(page)));
-}
-
-static void sh7705_flush_cache_all(void *args)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- jump_to_uncached();
-
- cache_wback_all();
- back_to_cached();
- local_irq_restore(flags);
-}
-
-/*
- * Write back and invalidate I/D-caches for the page.
- *
- * ADDRESS: Virtual Address (U0 address)
- */
-static void sh7705_flush_cache_page(void *args)
-{
- struct flusher_data *data = args;
- unsigned long pfn = data->addr2;
-
- __flush_dcache_page(pfn << PAGE_SHIFT);
-}
-
-/*
- * This is called when a page-cache page is about to be mapped into a
- * user process' address space. It offers an opportunity for a
- * port to ensure d-cache/i-cache coherency if necessary.
- *
- * Not entirely sure why this is necessary on SH3 with 32K cache but
- * without it we get occasional "Memory fault" when loading a program.
- */
-static void sh7705_flush_icache_page(void *page)
-{
- __flush_purge_region(page_address(page), PAGE_SIZE);
-}
-
-void __init sh7705_cache_init(void)
-{
- local_flush_icache_range = sh7705_flush_icache_range;
- local_flush_dcache_page = sh7705_flush_dcache_page;
- local_flush_cache_all = sh7705_flush_cache_all;
- local_flush_cache_mm = sh7705_flush_cache_all;
- local_flush_cache_dup_mm = sh7705_flush_cache_all;
- local_flush_cache_range = sh7705_flush_cache_all;
- local_flush_cache_page = sh7705_flush_cache_page;
- local_flush_icache_page = sh7705_flush_icache_page;
-}
diff --git a/arch/sh/mm/cache-shx3.c b/arch/sh/mm/cache-shx3.c
deleted file mode 100644
index 24c58b7dc02265..00000000000000
--- a/arch/sh/mm/cache-shx3.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/sh/mm/cache-shx3.c - SH-X3 optimized cache ops
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/cache.h>
-
-#define CCR_CACHE_SNM 0x40000 /* Hardware-assisted synonym avoidance */
-#define CCR_CACHE_IBE 0x1000000 /* ICBI broadcast */
-
-void __init shx3_cache_init(void)
-{
- unsigned int ccr;
-
- ccr = __raw_readl(SH_CCR);
-
- /*
- * If we've got cache aliases, resolve them in hardware.
- */
- if (boot_cpu_data.dcache.n_aliases || boot_cpu_data.icache.n_aliases) {
- ccr |= CCR_CACHE_SNM;
-
- boot_cpu_data.icache.n_aliases = 0;
- boot_cpu_data.dcache.n_aliases = 0;
-
- pr_info("Enabling hardware synonym avoidance\n");
- }
-
-#ifdef CONFIG_SMP
- /*
- * Broadcast I-cache block invalidations by default.
- */
- ccr |= CCR_CACHE_IBE;
-#endif
-
- writel_uncached(ccr, SH_CCR);
-}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
deleted file mode 100644
index 3aef78ceb82090..00000000000000
--- a/arch/sh/mm/cache.c
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/cache.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2010 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void (*local_flush_cache_all)(void *args) = cache_noop;
-void (*local_flush_cache_mm)(void *args) = cache_noop;
-void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
-void (*local_flush_cache_page)(void *args) = cache_noop;
-void (*local_flush_cache_range)(void *args) = cache_noop;
-void (*local_flush_dcache_page)(void *args) = cache_noop;
-void (*local_flush_icache_range)(void *args) = cache_noop;
-void (*local_flush_icache_page)(void *args) = cache_noop;
-void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
-
-void (*__flush_wback_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_wback_region);
-void (*__flush_purge_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_purge_region);
-void (*__flush_invalidate_region)(void *start, int size);
-EXPORT_SYMBOL(__flush_invalidate_region);
-
-static inline void noop__flush_region(void *start, int size)
-{
-}
-
-static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
- int wait)
-{
- preempt_disable();
-
- /* Needing IPI for cross-core flush is SHX3-specific. */
-#ifdef CONFIG_CPU_SHX3
- /*
- * It's possible that this gets called early on when IRQs are
- * still disabled due to ioremapping by the boot CPU, so don't
- * even attempt IPIs unless there are other CPUs online.
- */
- if (num_online_cpus() > 1)
- smp_call_function(func, info, wait);
-#endif
-
- func(info);
-
- preempt_enable();
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
- kunmap_coherent(vto);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-
- if (vma->vm_flags & VM_EXEC)
- flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
-{
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
- kunmap_coherent(vfrom);
- } else {
- memcpy(dst, src, len);
- if (boot_cpu_data.dcache.n_aliases)
- clear_bit(PG_dcache_clean, &page->flags);
- }
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(from) &&
- test_bit(PG_dcache_clean, &from->flags)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent(vfrom);
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
-
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
- (vma->vm_flags & VM_EXEC))
- __flush_purge_region(vto, PAGE_SIZE);
-
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
- void *kaddr = kmap_atomic(page);
-
- clear_page(kaddr);
-
- if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
- __flush_purge_region(kaddr, PAGE_SIZE);
-
- kunmap_atomic(kaddr);
-}
-EXPORT_SYMBOL(clear_user_highpage);
-
-void __update_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
-{
- struct page *page;
- unsigned long pfn = pte_pfn(pte);
-
- if (!boot_cpu_data.dcache.n_aliases)
- return;
-
- page = pfn_to_page(pfn);
- if (pfn_valid(pfn)) {
- int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
- if (dirty)
- __flush_purge_region(page_address(page), PAGE_SIZE);
- }
-}
-
-void __flush_anon_page(struct page *page, unsigned long vmaddr)
-{
- unsigned long addr = (unsigned long) page_address(page);
-
- if (pages_do_alias(addr, vmaddr)) {
- if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
- test_bit(PG_dcache_clean, &page->flags)) {
- void *kaddr;
-
- kaddr = kmap_coherent(page, vmaddr);
- /* XXX.. For now kunmap_coherent() does a purge */
- /* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
- kunmap_coherent(kaddr);
- } else
- __flush_purge_region((void *)addr, PAGE_SIZE);
- }
-}
-
-void flush_cache_all(void)
-{
- cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
-}
-EXPORT_SYMBOL(flush_cache_all);
-
-void flush_cache_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
-}
-
-void flush_cache_dup_mm(struct mm_struct *mm)
-{
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
- unsigned long pfn)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = addr;
- data.addr2 = pfn;
-
- cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = vma;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_cache_range);
-
-void flush_dcache_page(struct page *page)
-{
- cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void flush_icache_range(unsigned long start, unsigned long end)
-{
- struct flusher_data data;
-
- data.vma = NULL;
- data.addr1 = start;
- data.addr2 = end;
-
- cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
- /* Nothing uses the VMA, so just pass the struct page along */
- cacheop_on_each_cpu(local_flush_icache_page, page, 1);
-}
-
-void flush_cache_sigtramp(unsigned long address)
-{
- cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
-}
-
-static void compute_alias(struct cache_info *c)
-{
-#ifdef CONFIG_MMU
- c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
-#else
- c->alias_mask = 0;
-#endif
- c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
-}
-
-static void __init emit_cache_params(void)
-{
- printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.icache.ways,
- boot_cpu_data.icache.sets,
- boot_cpu_data.icache.way_incr);
- printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.icache.entry_mask,
- boot_cpu_data.icache.alias_mask,
- boot_cpu_data.icache.n_aliases);
- printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.dcache.ways,
- boot_cpu_data.dcache.sets,
- boot_cpu_data.dcache.way_incr);
- printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.dcache.entry_mask,
- boot_cpu_data.dcache.alias_mask,
- boot_cpu_data.dcache.n_aliases);
-
- /*
- * Emit Secondary Cache parameters if the CPU has a probed L2.
- */
- if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- boot_cpu_data.scache.ways,
- boot_cpu_data.scache.sets,
- boot_cpu_data.scache.way_incr);
- printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- boot_cpu_data.scache.entry_mask,
- boot_cpu_data.scache.alias_mask,
- boot_cpu_data.scache.n_aliases);
- }
-}
-
-void __init cpu_cache_init(void)
-{
- unsigned int cache_disabled = 0;
-
-#ifdef SH_CCR
- cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
-#endif
-
- compute_alias(&boot_cpu_data.icache);
- compute_alias(&boot_cpu_data.dcache);
- compute_alias(&boot_cpu_data.scache);
-
- __flush_wback_region = noop__flush_region;
- __flush_purge_region = noop__flush_region;
- __flush_invalidate_region = noop__flush_region;
-
- /*
- * No flushing is necessary in the disabled cache case so we can
- * just keep the noop functions in local_flush_..() and __flush_..()
- */
- if (unlikely(cache_disabled))
- goto skip;
-
- if (boot_cpu_data.type == CPU_J2) {
- extern void __weak j2_cache_init(void);
-
- j2_cache_init();
- } else if (boot_cpu_data.family == CPU_FAMILY_SH2) {
- extern void __weak sh2_cache_init(void);
-
- sh2_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
- extern void __weak sh2a_cache_init(void);
-
- sh2a_cache_init();
- }
-
- if (boot_cpu_data.family == CPU_FAMILY_SH3) {
- extern void __weak sh3_cache_init(void);
-
- sh3_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7705) &&
- (boot_cpu_data.dcache.sets == 512)) {
- extern void __weak sh7705_cache_init(void);
-
- sh7705_cache_init();
- }
- }
-
- if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
- (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
- extern void __weak sh4_cache_init(void);
-
- sh4_cache_init();
-
- if ((boot_cpu_data.type == CPU_SH7786) ||
- (boot_cpu_data.type == CPU_SHX3)) {
- extern void __weak shx3_cache_init(void);
-
- shx3_cache_init();
- }
- }
-
-skip:
- emit_cache_params();
-}
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
deleted file mode 100644
index 0de206c1acfe9f..00000000000000
--- a/arch/sh/mm/consistent.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-static int __init memchunk_setup(char *str)
-{
- return 1; /* accept anything that begins with "memchunk." */
-}
-__setup("memchunk.", memchunk_setup);
-
-static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
-{
- char *p = boot_command_line;
- int k = strlen(name);
-
- while ((p = strstr(p, "memchunk."))) {
- p += 9; /* strlen("memchunk.") */
- if (!strncmp(name, p, k) && p[k] == '=') {
- p += k + 1;
- *sizep = memparse(p, NULL);
- pr_info("%s: forcing memory chunk size to 0x%08lx\n",
- name, *sizep);
- break;
- }
- }
-}
-
-int __init platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
-{
- struct resource *r;
- dma_addr_t dma_handle;
- void *buf;
-
- r = pdev->resource + pdev->num_resources - 1;
- if (r->flags) {
- pr_warn("%s: unable to find empty space for resource\n", name);
- return -EINVAL;
- }
-
- memchunk_cmdline_override(name, &memsize);
- if (!memsize)
- return 0;
-
- buf = dma_alloc_coherent(&pdev->dev, memsize, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_warn("%s: unable to allocate memory\n", name);
- return -ENOMEM;
- }
-
- r->flags = IORESOURCE_MEM;
- r->start = dma_handle;
- r->end = r->start + memsize - 1;
- r->name = name;
- return 0;
-}
diff --git a/arch/sh/mm/extable_32.c b/arch/sh/mm/extable_32.c
deleted file mode 100644
index 14312027bb0806..00000000000000
--- a/arch/sh/mm/extable_32.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/mm/extable.c
- * Taken from:
- * linux/arch/i386/mm/extable.c
- */
-
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-#include <asm/ptrace.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
- return 1;
- }
-
- return 0;
-}
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
deleted file mode 100644
index acd2f5e50bfcd0..00000000000000
--- a/arch/sh/mm/fault.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Page fault handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * Based on linux/arch/i386/mm/fault.c:
- * Copyright (C) 1995 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched/signal.h>
-#include <linux/hardirq.h>
-#include <linux/kprobes.h>
-#include <linux/perf_event.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <asm/io_trapped.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-
-static void
-force_sig_info_fault(int si_signo, int si_code, unsigned long address)
-{
- force_sig_fault(si_signo, si_code, (void __user *)address);
-}
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-static void show_pte(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
-
- if (mm) {
- pgd = mm->pgd;
- } else {
- pgd = get_TTB();
-
- if (unlikely(!pgd))
- pgd = swapper_pg_dir;
- }
-
- pr_alert("pgd = %p\n", pgd);
- pgd += pgd_index(addr);
- pr_alert("[%08lx] *pgd=%0*llx", addr, (u32)(sizeof(*pgd) * 2),
- (u64)pgd_val(*pgd));
-
- do {
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
-
- if (pgd_none(*pgd))
- break;
-
- if (pgd_bad(*pgd)) {
- pr_cont("(bad)");
- break;
- }
-
- p4d = p4d_offset(pgd, addr);
- if (PTRS_PER_P4D != 1)
- pr_cont(", *p4d=%0*Lx", (u32)(sizeof(*p4d) * 2),
- (u64)p4d_val(*p4d));
-
- if (p4d_none(*p4d))
- break;
-
- if (p4d_bad(*p4d)) {
- pr_cont("(bad)");
- break;
- }
-
- pud = pud_offset(p4d, addr);
- if (PTRS_PER_PUD != 1)
- pr_cont(", *pud=%0*llx", (u32)(sizeof(*pud) * 2),
- (u64)pud_val(*pud));
-
- if (pud_none(*pud))
- break;
-
- if (pud_bad(*pud)) {
- pr_cont("(bad)");
- break;
- }
-
- pmd = pmd_offset(pud, addr);
- if (PTRS_PER_PMD != 1)
- pr_cont(", *pmd=%0*llx", (u32)(sizeof(*pmd) * 2),
- (u64)pmd_val(*pmd));
-
- if (pmd_none(*pmd))
- break;
-
- if (pmd_bad(*pmd)) {
- pr_cont("(bad)");
- break;
- }
-
- /* We must not map this if we have highmem enabled */
- if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
- break;
-
- pte = pte_offset_kernel(pmd, addr);
- pr_cont(", *pte=%0*llx", (u32)(sizeof(*pte) * 2),
- (u64)pte_val(*pte));
- } while (0);
-
- pr_cont("\n");
-}
-
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
- unsigned index = pgd_index(address);
- pgd_t *pgd_k;
- p4d_t *p4d, *p4d_k;
- pud_t *pud, *pud_k;
- pmd_t *pmd, *pmd_k;
-
- pgd += index;
- pgd_k = init_mm.pgd + index;
-
- if (!pgd_present(*pgd_k))
- return NULL;
-
- p4d = p4d_offset(pgd, address);
- p4d_k = p4d_offset(pgd_k, address);
- if (!p4d_present(*p4d_k))
- return NULL;
-
- pud = pud_offset(p4d, address);
- pud_k = pud_offset(p4d_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- if (!pud_present(*pud))
- set_pud(pud, *pud_k);
-
- pmd = pmd_offset(pud, address);
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
-
- if (!pmd_present(*pmd))
- set_pmd(pmd, *pmd_k);
- else {
- /*
- * The page tables are fully synchronised so there must
- * be another reason for the fault. Return NULL here to
- * signal that we have not taken care of the fault.
- */
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
- return NULL;
- }
-
- return pmd_k;
-}
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define __FAULT_ADDR_LIMIT P3_ADDR_MAX
-#else
-#define __FAULT_ADDR_LIMIT VMALLOC_END
-#endif
-
-/*
- * Handle a fault on the vmalloc or module mapping area
- */
-static noinline int vmalloc_fault(unsigned long address)
-{
- pgd_t *pgd_k;
- pmd_t *pmd_k;
- pte_t *pte_k;
-
- /* Make sure we are in vmalloc/module/P3 area: */
- if (!(address >= VMALLOC_START && address < __FAULT_ADDR_LIMIT))
- return -1;
-
- /*
- * Synchronize this task's top level page-table
- * with the 'reference' page table.
- *
- * Do _not_ use "current" here. We might be inside
- * an interrupt in the middle of a task switch..
- */
- pgd_k = get_TTB();
- pmd_k = vmalloc_sync_one(pgd_k, address);
- if (!pmd_k)
- return -1;
-
- pte_k = pte_offset_kernel(pmd_k, address);
- if (!pte_present(*pte_k))
- return -1;
-
- return 0;
-}
-
-static void
-show_fault_oops(struct pt_regs *regs, unsigned long address)
-{
- if (!oops_may_print())
- return;
-
- pr_alert("BUG: unable to handle kernel %s at %08lx\n",
- address < PAGE_SIZE ? "NULL pointer dereference"
- : "paging request",
- address);
- pr_alert("PC:");
- printk_address(regs->pc, 1);
-
- show_pte(NULL, address);
-}
-
-static noinline void
-no_context(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- /* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
- return;
-
- if (handle_trapped_io(regs, address))
- return;
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- bust_spinlocks(1);
-
- show_fault_oops(regs, address);
-
- die("Oops", regs, error_code);
-}
-
-static void
-__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- /* User mode accesses just cause a SIGSEGV */
- if (user_mode(regs)) {
- /*
- * It's possible to have interrupts off here:
- */
- local_irq_enable();
-
- force_sig_info_fault(SIGSEGV, si_code, address);
-
- return;
- }
-
- no_context(regs, error_code, address);
-}
-
-static noinline void
-bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
-}
-
-static void
-__bad_area(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, int si_code)
-{
- struct mm_struct *mm = current->mm;
-
- /*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
- mmap_read_unlock(mm);
-
- __bad_area_nosemaphore(regs, error_code, address, si_code);
-}
-
-static noinline void
-bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_MAPERR);
-}
-
-static noinline void
-bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- __bad_area(regs, error_code, address, SEGV_ACCERR);
-}
-
-static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
-{
- struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->mm;
-
- mmap_read_unlock(mm);
-
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs))
- no_context(regs, error_code, address);
-
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address);
-}
-
-static noinline int
-mm_fault_error(struct pt_regs *regs, unsigned long error_code,
- unsigned long address, vm_fault_t fault)
-{
- /*
- * Pagefault was interrupted by SIGKILL. We have no reason to
- * continue pagefault.
- */
- if (fault_signal_pending(fault, regs)) {
- if (!user_mode(regs))
- no_context(regs, error_code, address);
- return 1;
- }
-
- /* Release mmap_lock first if necessary */
- if (!(fault & VM_FAULT_RETRY))
- mmap_read_unlock(current->mm);
-
- if (!(fault & VM_FAULT_ERROR))
- return 0;
-
- if (fault & VM_FAULT_OOM) {
- /* Kernel mode? Handle exceptions or die: */
- if (!user_mode(regs)) {
- no_context(regs, error_code, address);
- return 1;
- }
-
- /*
- * We ran out of memory, call the OOM killer, and return the
- * userspace (which will retry the fault, or kill us if we got
- * oom-killed):
- */
- pagefault_out_of_memory();
- } else {
- if (fault & VM_FAULT_SIGBUS)
- do_sigbus(regs, error_code, address);
- else if (fault & VM_FAULT_SIGSEGV)
- bad_area(regs, error_code, address);
- else
- BUG();
- }
-
- return 1;
-}
-
-static inline int access_error(int error_code, struct vm_area_struct *vma)
-{
- if (error_code & FAULT_CODE_WRITE) {
- /* write, present and write, not present: */
- if (unlikely(!(vma->vm_flags & VM_WRITE)))
- return 1;
- return 0;
- }
-
- /* ITLB miss on NX page */
- if (unlikely((error_code & FAULT_CODE_ITLB) &&
- !(vma->vm_flags & VM_EXEC)))
- return 1;
-
- /* read, not present: */
- if (unlikely(!vma_is_accessible(vma)))
- return 1;
-
- return 0;
-}
-
-static int fault_in_kernel_space(unsigned long address)
-{
- return address >= TASK_SIZE;
-}
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
- unsigned long error_code,
- unsigned long address)
-{
- unsigned long vec;
- struct task_struct *tsk;
- struct mm_struct *mm;
- struct vm_area_struct * vma;
- vm_fault_t fault;
- unsigned int flags = FAULT_FLAG_DEFAULT;
-
- tsk = current;
- mm = tsk->mm;
- vec = lookup_exception_vector();
-
- /*
- * We fault-in kernel-space virtual memory on-demand. The
- * 'reference' page table is init_mm.pgd.
- *
- * NOTE! We MUST NOT take any locks for this case. We may
- * be in an interrupt or a critical region, and should
- * only copy the information from the master page table,
- * nothing more.
- */
- if (unlikely(fault_in_kernel_space(address))) {
- if (vmalloc_fault(address) >= 0)
- return;
- if (kprobe_page_fault(regs, vec))
- return;
-
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
- if (unlikely(kprobe_page_fault(regs, vec)))
- return;
-
- /* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK)
- local_irq_enable();
-
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
-
- /*
- * If we're in an interrupt, have no user context or are running
- * with pagefaults disabled then we must not take the fault:
- */
- if (unlikely(faulthandler_disabled() || !mm)) {
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
-
-retry:
- mmap_read_lock(mm);
-
- vma = find_vma(mm, address);
- if (unlikely(!vma)) {
- bad_area(regs, error_code, address);
- return;
- }
- if (likely(vma->vm_start <= address))
- goto good_area;
- if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
- bad_area(regs, error_code, address);
- return;
- }
- if (unlikely(expand_stack(vma, address))) {
- bad_area(regs, error_code, address);
- return;
- }
-
- /*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- if (unlikely(access_error(error_code, vma))) {
- bad_area_access_error(regs, error_code, address);
- return;
- }
-
- set_thread_fault_code(error_code);
-
- if (user_mode(regs))
- flags |= FAULT_FLAG_USER;
- if (error_code & FAULT_CODE_WRITE)
- flags |= FAULT_FLAG_WRITE;
-
- /*
- * If for any reason at all we couldn't handle the fault,
- * make sure we exit gracefully rather than endlessly redo
- * the fault.
- */
- fault = handle_mm_fault(vma, address, flags, regs);
-
- if (unlikely(fault & (VM_FAULT_RETRY | VM_FAULT_ERROR)))
- if (mm_fault_error(regs, error_code, address, fault))
- return;
-
- /* The fault is fully completed (including releasing mmap lock) */
- if (fault & VM_FAULT_COMPLETED)
- return;
-
- if (fault & VM_FAULT_RETRY) {
- flags |= FAULT_FLAG_TRIED;
-
- /*
- * No need to mmap_read_unlock(mm) as we would
- * have already released it in __lock_page_or_retry
- * in mm/filemap.c.
- */
- goto retry;
- }
-
- mmap_read_unlock(mm);
-}
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
deleted file mode 100644
index 8b8ef89721041b..00000000000000
--- a/arch/sh/mm/flush-sh4.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/cache_insns.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_wback_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbwb(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-static void sh4__flush_purge_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
- while (cnt) {
- __ocbp(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-/*
- * No write back please
- */
-static void sh4__flush_invalidate_region(void *start, int size)
-{
- reg_size_t aligned_start, v, cnt, end;
-
- aligned_start = register_align(start);
- v = aligned_start & ~(L1_CACHE_BYTES-1);
- end = (aligned_start + size + L1_CACHE_BYTES-1)
- & ~(L1_CACHE_BYTES-1);
- cnt = (end - v) / L1_CACHE_BYTES;
-
- while (cnt >= 8) {
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt -= 8;
- }
-
- while (cnt) {
- __ocbi(v); v += L1_CACHE_BYTES;
- cnt--;
- }
-}
-
-void __init sh4__flush_region_init(void)
-{
- __flush_wback_region = sh4__flush_wback_region;
- __flush_invalidate_region = sh4__flush_invalidate_region;
- __flush_purge_region = sh4__flush_purge_region;
-}
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
deleted file mode 100644
index 999ab5916e6927..00000000000000
--- a/arch/sh/mm/hugetlbpage.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/mm/hugetlbpage.c
- *
- * SuperH HugeTLB page support.
- *
- * Cloned from sparc64 by Paul Mundt.
- *
- * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com)
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/sysctl.h>
-
-#include <asm/mman.h>
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_alloc(mm, pgd, addr);
- if (p4d) {
- pud = pud_alloc(mm, p4d, addr);
- if (pud) {
- pmd = pmd_alloc(mm, pud, addr);
- if (pmd)
- pte = pte_alloc_map(mm, pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-pte_t *huge_pte_offset(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
-
- pgd = pgd_offset(mm, addr);
- if (pgd) {
- p4d = p4d_offset(pgd, addr);
- if (p4d) {
- pud = pud_offset(p4d, addr);
- if (pud) {
- pmd = pmd_offset(pud, addr);
- if (pmd)
- pte = pte_offset_map(pmd, addr);
- }
- }
- }
-
- return pte;
-}
-
-int pmd_huge(pmd_t pmd)
-{
- return 0;
-}
-
-int pud_huge(pud_t pud)
-{
- return 0;
-}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
deleted file mode 100644
index 506784702430c7..00000000000000
--- a/arch/sh/mm/init.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/sh/mm/init.c
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2011 Paul Mundt
- *
- * Based on linux/arch/i386/mm/init.c:
- * Copyright (C) 1995 Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <linux/pagemap.h>
-#include <linux/percpu.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-#include <asm/mmu_context.h>
-#include <asm/mmzone.h>
-#include <asm/kexec.h>
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/sizes.h>
-#include "ioremap.h"
-
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-void __init generic_mem_init(void)
-{
- memblock_add(__MEMORY_START, __MEMORY_SIZE);
-}
-
-void __init __weak plat_mem_setup(void)
-{
- /* Nothing to see here, move along. */
-}
-
-#ifdef CONFIG_MMU
-static pte_t *__get_pte_phys(unsigned long addr)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
-
- pgd = pgd_offset_k(addr);
- if (pgd_none(*pgd)) {
- pgd_ERROR(*pgd);
- return NULL;
- }
-
- p4d = p4d_alloc(NULL, pgd, addr);
- if (unlikely(!p4d)) {
- p4d_ERROR(*p4d);
- return NULL;
- }
-
- pud = pud_alloc(NULL, p4d, addr);
- if (unlikely(!pud)) {
- pud_ERROR(*pud);
- return NULL;
- }
-
- pmd = pmd_alloc(NULL, pud, addr);
- if (unlikely(!pmd)) {
- pmd_ERROR(*pmd);
- return NULL;
- }
-
- return pte_offset_kernel(pmd, addr);
-}
-
-static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
- if (!pte_none(*pte)) {
- pte_ERROR(*pte);
- return;
- }
-
- set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
- local_flush_tlb_one(get_asid(), addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_wire_entry(NULL, addr, *pte);
-}
-
-static void clear_pte_phys(unsigned long addr, pgprot_t prot)
-{
- pte_t *pte;
-
- pte = __get_pte_phys(addr);
-
- if (pgprot_val(prot) & _PAGE_WIRED)
- tlb_unwire_entry();
-
- set_pte(pte, pfn_pte(0, __pgprot(0)));
- local_flush_tlb_one(get_asid(), addr);
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- set_pte_phys(address, phys, prot);
-}
-
-void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
-{
- unsigned long address = __fix_to_virt(idx);
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- clear_pte_phys(address, prot);
-}
-
-static pmd_t * __init one_md_table_init(pud_t *pud)
-{
- if (pud_none(*pud)) {
- pmd_t *pmd;
-
- pmd = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pmd)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pud_populate(&init_mm, pud, pmd);
- BUG_ON(pmd != pmd_offset(pud, 0));
- }
-
- return pmd_offset(pud, 0);
-}
-
-static pte_t * __init one_page_table_init(pmd_t *pmd)
-{
- if (pmd_none(*pmd)) {
- pte_t *pte;
-
- pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!pte)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
- pmd_populate_kernel(&init_mm, pmd, pte);
- BUG_ON(pte != pte_offset_kernel(pmd, 0));
- }
-
- return pte_offset_kernel(pmd, 0);
-}
-
-static pte_t * __init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
- unsigned long vaddr, pte_t *lastpte)
-{
- return pte;
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte = NULL;
- int i, j, k;
- unsigned long vaddr;
-
- vaddr = start;
- i = pgd_index(vaddr);
- j = pud_index(vaddr);
- k = pmd_index(vaddr);
- pgd = pgd_base + i;
-
- for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
- pud = (pud_t *)pgd;
- for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
- pmd = one_md_table_init(pud);
-#ifndef __PAGETABLE_PMD_FOLDED
- pmd += k;
-#endif
- for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
- pte = page_table_kmap_check(one_page_table_init(pmd),
- pmd, vaddr, pte);
- vaddr += PMD_SIZE;
- }
- k = 0;
- }
- j = 0;
- }
-}
-#endif /* CONFIG_MMU */
-
-void __init allocate_pgdat(unsigned int nid)
-{
- unsigned long start_pfn, end_pfn;
-
- get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
-
-#ifdef CONFIG_NUMA
- NODE_DATA(nid) = memblock_alloc_try_nid(
- sizeof(struct pglist_data),
- SMP_CACHE_BYTES, MEMBLOCK_LOW_LIMIT,
- MEMBLOCK_ALLOC_ACCESSIBLE, nid);
- if (!NODE_DATA(nid))
- panic("Can't allocate pgdat for node %d\n", nid);
-#endif
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-}
-
-static void __init do_init_bootmem(void)
-{
- unsigned long start_pfn, end_pfn;
- int i;
-
- /* Add active regions with valid PFNs. */
- for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL)
- __add_active_range(0, start_pfn, end_pfn);
-
- /* All of system RAM sits in node 0 for the non-NUMA case */
- allocate_pgdat(0);
- node_set_online(0);
-
- plat_mem_setup();
-
- sparse_init();
-}
-
-static void __init early_reserve_mem(void)
-{
- unsigned long start_pfn;
- u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
- u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
-
- /*
- * Partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(_end));
-
- /*
- * Reserve the kernel text and Reserve the bootmem bitmap. We do
- * this in two steps (first step was init_bootmem()), because
- * this catches the (definitely buggy) case of us accidentally
- * initializing the bootmem allocator with an invalid RAM area.
- */
- memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
-
- /*
- * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
- */
- if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
-
- /*
- * Handle additional early reservations
- */
- check_for_initrd();
- reserve_crashkernel();
-}
-
-void __init paging_init(void)
-{
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- unsigned long vaddr, end;
-
- sh_mv.mv_mem_init();
-
- early_reserve_mem();
-
- /*
- * Once the early reservations are out of the way, give the
- * platforms a chance to kick out some memory.
- */
- if (sh_mv.mv_mem_reserve)
- sh_mv.mv_mem_reserve();
-
- memblock_enforce_memory_limit(memory_limit);
- memblock_allow_resize();
-
- memblock_dump_all();
-
- /*
- * Determine low and high memory ranges:
- */
- max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
- min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
-
- nodes_clear(node_online_map);
-
- memory_start = (unsigned long)__va(__MEMORY_START);
- memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
-
- uncached_init();
- pmb_init();
- do_init_bootmem();
- ioremap_fixed_init();
-
- /* We don't need to map the kernel through the TLB, as
- * it is permanatly mapped using P1. So clear the
- * entire pgd. */
- memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
- /* Set an initial value for the MMU.TTB so we don't have to
- * check for a null value. */
- set_TTB(swapper_pg_dir);
-
- /*
- * Populate the relevant portions of swapper_pg_dir so that
- * we can use the fixmap entries without calling kmalloc.
- * pte's will be filled in by __set_fixmap().
- */
- vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
- end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
- page_table_range_init(vaddr, end, swapper_pg_dir);
-
- kmap_coherent_init();
-
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- free_area_init(max_zone_pfns);
-}
-
-unsigned int mem_init_done = 0;
-
-void __init mem_init(void)
-{
- pg_data_t *pgdat;
-
- high_memory = NULL;
- for_each_online_pgdat(pgdat)
- high_memory = max_t(void *, high_memory,
- __va(pgdat_end_pfn(pgdat) << PAGE_SHIFT));
-
- memblock_free_all();
-
- /* Set this up early, so we can take care of the zero page */
- cpu_cache_init();
-
- /* clear the zero-page */
- memset(empty_zero_page, 0, PAGE_SIZE);
- __flush_wback_region(empty_zero_page, PAGE_SIZE);
-
- vsyscall_init();
-
- pr_info("virtual kernel memory layout:\n"
- " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
- " lowmem : 0x%08lx - 0x%08lx (%4ld MB) (cached)\n"
-#ifdef CONFIG_UNCACHED_MAPPING
- " : 0x%08lx - 0x%08lx (%4ld MB) (uncached)\n"
-#endif
- " .init : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .data : 0x%08lx - 0x%08lx (%4ld kB)\n"
- " .text : 0x%08lx - 0x%08lx (%4ld kB)\n",
- FIXADDR_START, FIXADDR_TOP,
- (FIXADDR_TOP - FIXADDR_START) >> 10,
-
- (unsigned long)VMALLOC_START, VMALLOC_END,
- (VMALLOC_END - VMALLOC_START) >> 20,
-
- (unsigned long)memory_start, (unsigned long)high_memory,
- ((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
-
-#ifdef CONFIG_UNCACHED_MAPPING
- uncached_start, uncached_end, uncached_size >> 20,
-#endif
-
- (unsigned long)&__init_begin, (unsigned long)&__init_end,
- ((unsigned long)&__init_end -
- (unsigned long)&__init_begin) >> 10,
-
- (unsigned long)&_etext, (unsigned long)&_edata,
- ((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
-
- (unsigned long)&_text, (unsigned long)&_etext,
- ((unsigned long)&_etext - (unsigned long)&_text) >> 10);
-
- mem_init_done = 1;
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-int arch_add_memory(int nid, u64 start, u64 size,
- struct mhp_params *params)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
- int ret;
-
- if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
- return -EINVAL;
-
- /* We only have ZONE_NORMAL, so this is easy.. */
- ret = __add_pages(nid, start_pfn, nr_pages, params);
- if (unlikely(ret))
- printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
-
- return ret;
-}
-
-void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
-{
- unsigned long start_pfn = PFN_DOWN(start);
- unsigned long nr_pages = size >> PAGE_SHIFT;
-
- __remove_pages(start_pfn, nr_pages, altmap);
-}
-#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
deleted file mode 100644
index 21342581144dee..00000000000000
--- a/arch/sh/mm/ioremap.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * arch/sh/mm/ioremap.c
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2005 - 2010 Paul Mundt
- *
- * Re-map IO memory to kernel address space so that we can access it.
- * This is needed for high PCI addresses that aren't mapped in the
- * 640k-1MB IO memory area on PC's
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <asm/io_trapped.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include "ioremap.h"
-
-/*
- * On 32-bit SH, we traditionally have the whole physical address space mapped
- * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
- * anything but place the address in the proper segment. This is true for P1
- * and P2 addresses, as well as some P3 ones. However, most of the P3 addresses
- * and newer cores using extended addressing need to map through page tables, so
- * the ioremap() implementation becomes a bit more complicated.
- */
-#ifdef CONFIG_29BIT
-static void __iomem *
-__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
- phys_addr_t last_addr = offset + size - 1;
-
- /*
- * For P1 and P2 space this is trivial, as everything is already
- * mapped. Uncached access for P1 addresses are done through P2.
- * In the P3 case or for addresses outside of the 29-bit space,
- * mapping must be done by the PMB or by using page tables.
- */
- if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
- u64 flags = pgprot_val(prot);
-
- /*
- * Anything using the legacy PTEA space attributes needs
- * to be kicked down to page table mappings.
- */
- if (unlikely(flags & _PAGE_PCC_MASK))
- return NULL;
- if (unlikely(flags & _PAGE_CACHABLE))
- return (void __iomem *)P1SEGADDR(offset);
-
- return (void __iomem *)P2SEGADDR(offset);
- }
-
- /* P4 above the store queues are always mapped. */
- if (unlikely(offset >= P3_ADDR_MAX))
- return (void __iomem *)P4SEGADDR(offset);
-
- return NULL;
-}
-#else
-#define __ioremap_29bit(offset, size, prot) NULL
-#endif /* CONFIG_29BIT */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem * __ref
-__ioremap_caller(phys_addr_t phys_addr, unsigned long size,
- pgprot_t pgprot, void *caller)
-{
- struct vm_struct *area;
- unsigned long offset, last_addr, addr, orig_addr;
- void __iomem *mapped;
-
- mapped = __ioremap_trapped(phys_addr, size);
- if (mapped)
- return mapped;
-
- mapped = __ioremap_29bit(phys_addr, size, pgprot);
- if (mapped)
- return mapped;
-
- /* Don't allow wraparound or zero size */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- /*
- * If we can't yet use the regular approach, go the fixmap route.
- */
- if (!mem_init_done)
- return ioremap_fixed(phys_addr, size, pgprot);
-
- /*
- * First try to remap through the PMB.
- * PMB entries are all pre-faulted.
- */
- mapped = pmb_remap_caller(phys_addr, size, pgprot, caller);
- if (mapped && !IS_ERR(mapped))
- return mapped;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(last_addr+1) - phys_addr;
-
- /*
- * Ok, go for it..
- */
- area = get_vm_area_caller(size, VM_IOREMAP, caller);
- if (!area)
- return NULL;
- area->phys_addr = phys_addr;
- orig_addr = addr = (unsigned long)area->addr;
-
- if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
- vunmap((void *)orig_addr);
- return NULL;
- }
-
- return (void __iomem *)(offset + (char *)orig_addr);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-/*
- * Simple checks for non-translatable mappings.
- */
-static inline int iomapping_nontranslatable(unsigned long offset)
-{
-#ifdef CONFIG_29BIT
- /*
- * In 29-bit mode this includes the fixed P1/P2 areas, as well as
- * parts of P3.
- */
- if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
- return 1;
-#endif
-
- return 0;
-}
-
-void iounmap(void __iomem *addr)
-{
- unsigned long vaddr = (unsigned long __force)addr;
- struct vm_struct *p;
-
- /*
- * Nothing to do if there is no translatable mapping.
- */
- if (iomapping_nontranslatable(vaddr))
- return;
-
- /*
- * There's no VMA if it's from an early fixed mapping.
- */
- if (iounmap_fixed(addr) == 0)
- return;
-
- /*
- * If the PMB handled it, there's nothing else to do.
- */
- if (pmb_unmap(addr) == 0)
- return;
-
- p = remove_vm_area((void *)(vaddr & PAGE_MASK));
- if (!p) {
- printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
- return;
- }
-
- kfree(p);
-}
-EXPORT_SYMBOL(iounmap);
diff --git a/arch/sh/mm/ioremap.h b/arch/sh/mm/ioremap.h
deleted file mode 100644
index f2544e721a3526..00000000000000
--- a/arch/sh/mm/ioremap.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _SH_MM_IORMEMAP_H
-#define _SH_MM_IORMEMAP_H 1
-
-#ifdef CONFIG_IOREMAP_FIXED
-void __iomem *ioremap_fixed(phys_addr_t, unsigned long, pgprot_t);
-int iounmap_fixed(void __iomem *);
-void ioremap_fixed_init(void);
-#else
-static inline void __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- BUG();
- return NULL;
-}
-static inline void ioremap_fixed_init(void)
-{
-}
-static inline int iounmap_fixed(void __iomem *addr)
-{
- return -EINVAL;
-}
-#endif /* CONFIG_IOREMAP_FIXED */
-#endif /* _SH_MM_IORMEMAP_H */
diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c
deleted file mode 100644
index 136113bcac2599..00000000000000
--- a/arch/sh/mm/ioremap_fixed.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * These functions should only be used when it is necessary to map a
- * physical address space into the kernel address space before ioremap()
- * can be used, e.g. early in boot before paging_init().
- *
- * Copyright (C) 2009 Matt Fleming
- */
-
-#include <linux/vmalloc.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-#include <linux/proc_fs.h>
-#include <asm/fixmap.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include "ioremap.h"
-
-struct ioremap_map {
- void __iomem *addr;
- unsigned long size;
- unsigned long fixmap_addr;
-};
-
-static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
-
-void __init ioremap_fixed_init(void)
-{
- struct ioremap_map *map;
- int i;
-
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
- }
-}
-
-void __init __iomem *
-ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
-{
- enum fixed_addresses idx0, idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- unsigned long offset;
- int i, slot;
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(phys_addr + size) - phys_addr;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (!map->addr) {
- map->size = size;
- slot = i;
- break;
- }
- }
-
- if (slot < 0)
- return NULL;
-
- /*
- * Mappings have to fit in the FIX_IOREMAP area.
- */
- nrpages = size >> PAGE_SHIFT;
- if (nrpages > FIX_N_IOREMAPS)
- return NULL;
-
- /*
- * Ok, go for it..
- */
- idx0 = FIX_IOREMAP_BEGIN + slot;
- idx = idx0;
- while (nrpages > 0) {
- pgprot_val(prot) |= _PAGE_WIRED;
- __set_fixmap(idx, phys_addr, prot);
- phys_addr += PAGE_SIZE;
- idx++;
- --nrpages;
- }
-
- map->addr = (void __iomem *)(offset + map->fixmap_addr);
- return map->addr;
-}
-
-int iounmap_fixed(void __iomem *addr)
-{
- enum fixed_addresses idx;
- struct ioremap_map *map;
- unsigned int nrpages;
- int i, slot;
-
- slot = -1;
- for (i = 0; i < FIX_N_IOREMAPS; i++) {
- map = &ioremap_maps[i];
- if (map->addr == addr) {
- slot = i;
- break;
- }
- }
-
- /*
- * If we don't match, it's not for us.
- */
- if (slot < 0)
- return -EINVAL;
-
- nrpages = map->size >> PAGE_SHIFT;
-
- idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
- while (nrpages > 0) {
- __clear_fixmap(idx, __pgprot(_PAGE_WIRED));
- --idx;
- --nrpages;
- }
-
- map->size = 0;
- map->addr = NULL;
-
- return 0;
-}
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
deleted file mode 100644
index 73fd7cc9943076..00000000000000
--- a/arch/sh/mm/kmap.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/kmap.c
- *
- * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
- unsigned long vaddr;
-
- /* cache the first coherent kmap pte */
- vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
- kmap_coherent_pte = virt_to_kpte(vaddr);
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- enum fixed_addresses idx;
- unsigned long vaddr;
-
- BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
-
- preempt_disable();
- pagefault_disable();
-
- idx = FIX_CMAP_END -
- (((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
- (FIX_N_COLOURS * smp_processor_id()));
-
- vaddr = __fix_to_virt(idx);
-
- BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
- set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
-
- return (void *)vaddr;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- if (kvaddr >= (void *)FIXADDR_START) {
- unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
- enum fixed_addresses idx = __virt_to_fix(vaddr);
-
- /* XXX.. Kill this later, here for sanity at the moment.. */
- __flush_purge_region((void *)vaddr, PAGE_SIZE);
-
- pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
- local_flush_tlb_one(get_asid(), vaddr);
- }
-
- pagefault_enable();
- preempt_enable();
-}
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
deleted file mode 100644
index b82199878b4594..00000000000000
--- a/arch/sh/mm/mmap.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/sh/mm/mmap.c
- *
- * Copyright (C) 2008 - 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sched/mm.h>
-#include <linux/mman.h>
-#include <linux/module.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-EXPORT_SYMBOL(shm_align_mask);
-
-#ifdef CONFIG_MMU
-static const pgprot_t protection_map[16] = {
- [VM_NONE] = PAGE_NONE,
- [VM_READ] = PAGE_READONLY,
- [VM_WRITE] = PAGE_COPY,
- [VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_EXEC] = PAGE_EXECREAD,
- [VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_EXEC | VM_WRITE] = PAGE_COPY,
- [VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY,
- [VM_SHARED] = PAGE_NONE,
- [VM_SHARED | VM_READ] = PAGE_READONLY,
- [VM_SHARED | VM_WRITE] = PAGE_WRITEONLY,
- [VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED,
- [VM_SHARED | VM_EXEC] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_READ] = PAGE_EXECREAD,
- [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_RWX,
- [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_RWX
-};
-DECLARE_VM_GET_PAGE_PROT
-
-/*
- * To avoid cache aliases, we map the shared page with same color.
- */
-static inline unsigned long COLOUR_ALIGN(unsigned long addr,
- unsigned long pgoff)
-{
- unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
- unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
-
- return base + off;
-}
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
-{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = 0;
- info.length = len;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- return vm_unmapped_area(&info);
-}
-
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
- const unsigned long len, const unsigned long pgoff,
- const unsigned long flags)
-{
- struct vm_area_struct *vma;
- struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
- int do_colour_align;
- struct vm_unmapped_area_info info;
-
- if (flags & MAP_FIXED) {
- /* We do not accept a shared mapping if it would violate
- * cache aliasing constraints.
- */
- if ((flags & MAP_SHARED) &&
- ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
- return -EINVAL;
- return addr;
- }
-
- if (unlikely(len > TASK_SIZE))
- return -ENOMEM;
-
- do_colour_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_colour_align = 1;
-
- /* requesting a specific address */
- if (addr) {
- if (do_colour_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
-
- vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vm_start_gap(vma)))
- return addr;
- }
-
- info.flags = VM_UNMAPPED_AREA_TOPDOWN;
- info.length = len;
- info.low_limit = PAGE_SIZE;
- info.high_limit = mm->mmap_base;
- info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0;
- info.align_offset = pgoff << PAGE_SHIFT;
- addr = vm_unmapped_area(&info);
-
- /*
- * A failed mmap() very likely causes application failure,
- * so fall back to the bottom-up function here. This scenario
- * can happen with large stack limits and large mmap()
- * allocations.
- */
- if (addr & ~PAGE_MASK) {
- VM_BUG_ON(addr != -ENOMEM);
- info.flags = 0;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- addr = vm_unmapped_area(&info);
- }
-
- return addr;
-}
-#endif /* CONFIG_MMU */
-
-/*
- * You really shouldn't be using read() or write() on /dev/mem. This
- * might go away in the future.
- */
-int valid_phys_addr_range(phys_addr_t addr, size_t count)
-{
- if (addr < __MEMORY_START)
- return 0;
- if (addr + count > __pa(high_memory))
- return 0;
-
- return 1;
-}
-
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
-{
- return 1;
-}
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
deleted file mode 100644
index 78c4b6e6d33ba3..00000000000000
--- a/arch/sh/mm/nommu.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/nommu.c
- *
- * Various helper routines and stubs for MMUless SH.
- *
- * Copyright (C) 2002 - 2009 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <linux/uaccess.h>
-
-/*
- * Nothing too terribly exciting here ..
- */
-void copy_page(void *to, void *from)
-{
- memcpy(to, from, PAGE_SIZE);
-}
-
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
-{
- memcpy(to, from, n);
- return 0;
-}
-
-__kernel_size_t __clear_user(void __user *to, __kernel_size_t n)
-{
- memset((__force void *)to, 0, n);
- return 0;
-}
-
-void local_flush_tlb_all(void)
-{
- BUG();
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- BUG();
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- BUG();
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-void __flush_tlb_global(void)
-{
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-}
-
-void __init kmap_coherent_init(void)
-{
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
- BUG();
- return NULL;
-}
-
-void kunmap_coherent(void *kvaddr)
-{
- BUG();
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
- pgd_t *pgd_base)
-{
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
-}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
deleted file mode 100644
index 50f0dc1744d049..00000000000000
--- a/arch/sh/mm/numa.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/mm/numa.c - Multiple node support for SH machines
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/memblock.h>
-#include <linux/mm.h>
-#include <linux/numa.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL_GPL(node_data);
-
-/*
- * On SH machines the conventional approach is to stash system RAM
- * in node 0, and other memory blocks in to node 1 and up, ordered by
- * latency. Each node's pgdat is node-local at the beginning of the node,
- * immediately followed by the node mem map.
- */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
- unsigned long start_pfn, end_pfn;
-
- /* Don't allow bogus node assignment */
- BUG_ON(nid >= MAX_NUMNODES || nid <= 0);
-
- start_pfn = PFN_DOWN(start);
- end_pfn = PFN_DOWN(end);
-
- pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
- PAGE_KERNEL);
-
- memblock_add(start, end - start);
-
- __add_active_range(nid, start_pfn, end_pfn);
-
- /* Node-local pgdat */
- NODE_DATA(nid) = memblock_alloc_node(sizeof(struct pglist_data),
- SMP_CACHE_BYTES, nid);
- if (!NODE_DATA(nid))
- panic("%s: Failed to allocate %zu bytes align=0x%x nid=%d\n",
- __func__, sizeof(struct pglist_data), SMP_CACHE_BYTES,
- nid);
-
- NODE_DATA(nid)->node_start_pfn = start_pfn;
- NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-
- /* It's up */
- node_set_online(nid);
-}
diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c
deleted file mode 100644
index cf7ce4b5735954..00000000000000
--- a/arch/sh/mm/pgtable.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-static struct kmem_cache *pgd_cachep;
-#if PAGETABLE_LEVELS > 2
-static struct kmem_cache *pmd_cachep;
-#endif
-
-void pgd_ctor(void *x)
-{
- pgd_t *pgd = x;
-
- memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
- memcpy(pgd + USER_PTRS_PER_PGD,
- swapper_pg_dir + USER_PTRS_PER_PGD,
- (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
-void pgtable_cache_init(void)
-{
- pgd_cachep = kmem_cache_create("pgd_cache",
- PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, pgd_ctor);
-#if PAGETABLE_LEVELS > 2
- pmd_cachep = kmem_cache_create("pmd_cache",
- PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
- PAGE_SIZE, SLAB_PANIC, NULL);
-#endif
-}
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return kmem_cache_alloc(pgd_cachep, GFP_KERNEL);
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- kmem_cache_free(pgd_cachep, pgd);
-}
-
-#if PAGETABLE_LEVELS > 2
-void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
- set_pud(pud, __pud((unsigned long)pmd));
-}
-
-pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
- return kmem_cache_alloc(pmd_cachep, GFP_KERNEL | __GFP_ZERO);
-}
-
-void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
- kmem_cache_free(pmd_cachep, pmd);
-}
-#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
deleted file mode 100644
index 68eb7cc6e56435..00000000000000
--- a/arch/sh/mm/pmb.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * arch/sh/mm/pmb.c
- *
- * Privileged Space Mapping Buffer (PMB) Support.
- *
- * Copyright (C) 2005 - 2011 Paul Mundt
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/syscore_ops.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/vmalloc.h>
-#include <linux/pgtable.h>
-#include <asm/cacheflush.h>
-#include <linux/sizes.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-
-struct pmb_entry;
-
-struct pmb_entry {
- unsigned long vpn;
- unsigned long ppn;
- unsigned long flags;
- unsigned long size;
-
- raw_spinlock_t lock;
-
- /*
- * 0 .. NR_PMB_ENTRIES for specific entry selection, or
- * PMB_NO_ENTRY to search for a free one
- */
- int entry;
-
- /* Adjacent entry link for contiguous multi-entry mappings */
- struct pmb_entry *link;
-};
-
-static struct {
- unsigned long size;
- int flag;
-} pmb_sizes[] = {
- { .size = SZ_512M, .flag = PMB_SZ_512M, },
- { .size = SZ_128M, .flag = PMB_SZ_128M, },
- { .size = SZ_64M, .flag = PMB_SZ_64M, },
- { .size = SZ_16M, .flag = PMB_SZ_16M, },
-};
-
-static void pmb_unmap_entry(struct pmb_entry *, int depth);
-
-static DEFINE_RWLOCK(pmb_rwlock);
-static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
-static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
-
-static unsigned int pmb_iomapping_enabled;
-
-static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
-{
- return (entry & PMB_E_MASK) << PMB_E_SHIFT;
-}
-
-static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_ADDR;
-}
-
-static __always_inline unsigned long mk_pmb_data(unsigned int entry)
-{
- return mk_pmb_entry(entry) | PMB_DATA;
-}
-
-static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
-{
- return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
-}
-
-/*
- * Ensure that the PMB entries match our cache configuration.
- *
- * When we are in 32-bit address extended mode, CCR.CB becomes
- * invalid, so care must be taken to manually adjust cacheable
- * translations.
- */
-static __always_inline unsigned long pmb_cache_flags(void)
-{
- unsigned long flags = 0;
-
-#if defined(CONFIG_CACHE_OFF)
- flags |= PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITETHROUGH)
- flags |= PMB_C | PMB_WT | PMB_UB;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- flags |= PMB_C;
-#endif
-
- return flags;
-}
-
-/*
- * Convert typical pgprot value to the PMB equivalent
- */
-static inline unsigned long pgprot_to_pmb_flags(pgprot_t prot)
-{
- unsigned long pmb_flags = 0;
- u64 flags = pgprot_val(prot);
-
- if (flags & _PAGE_CACHABLE)
- pmb_flags |= PMB_C;
- if (flags & _PAGE_WT)
- pmb_flags |= PMB_WT | PMB_UB;
-
- return pmb_flags;
-}
-
-static inline bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
-{
- return (b->vpn == (a->vpn + a->size)) &&
- (b->ppn == (a->ppn + a->size)) &&
- (b->flags == a->flags);
-}
-
-static bool pmb_mapping_exists(unsigned long vaddr, phys_addr_t phys,
- unsigned long size)
-{
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe, *iter;
- unsigned long span;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * See if VPN and PPN are bounded by an existing mapping.
- */
- if ((vaddr < pmbe->vpn) || (vaddr >= (pmbe->vpn + pmbe->size)))
- continue;
- if ((phys < pmbe->ppn) || (phys >= (pmbe->ppn + pmbe->size)))
- continue;
-
- /*
- * Now see if we're in range of a simple mapping.
- */
- if (size <= pmbe->size) {
- read_unlock(&pmb_rwlock);
- return true;
- }
-
- span = pmbe->size;
-
- /*
- * Finally for sizes that involve compound mappings, walk
- * the chain.
- */
- for (iter = pmbe->link; iter; iter = iter->link)
- span += iter->size;
-
- /*
- * Nothing else to do if the range requirements are met.
- */
- if (size <= span) {
- read_unlock(&pmb_rwlock);
- return true;
- }
- }
-
- read_unlock(&pmb_rwlock);
- return false;
-}
-
-static bool pmb_size_valid(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return true;
-
- return false;
-}
-
-static inline bool pmb_addr_valid(unsigned long addr, unsigned long size)
-{
- return (addr >= P1SEG && (addr + size - 1) < P3SEG);
-}
-
-static inline bool pmb_prot_valid(pgprot_t prot)
-{
- return (pgprot_val(prot) & _PAGE_USER) == 0;
-}
-
-static int pmb_size_to_flags(unsigned long size)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (pmb_sizes[i].size == size)
- return pmb_sizes[i].flag;
-
- return 0;
-}
-
-static int pmb_alloc_entry(void)
-{
- int pos;
-
- pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
- if (pos >= 0 && pos < NR_PMB_ENTRIES)
- __set_bit(pos, pmb_map);
- else
- pos = -ENOSPC;
-
- return pos;
-}
-
-static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int entry)
-{
- struct pmb_entry *pmbe;
- unsigned long irqflags;
- void *ret = NULL;
- int pos;
-
- write_lock_irqsave(&pmb_rwlock, irqflags);
-
- if (entry == PMB_NO_ENTRY) {
- pos = pmb_alloc_entry();
- if (unlikely(pos < 0)) {
- ret = ERR_PTR(pos);
- goto out;
- }
- } else {
- if (__test_and_set_bit(entry, pmb_map)) {
- ret = ERR_PTR(-ENOSPC);
- goto out;
- }
-
- pos = entry;
- }
-
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
-
- pmbe = &pmb_entry_list[pos];
-
- memset(pmbe, 0, sizeof(struct pmb_entry));
-
- raw_spin_lock_init(&pmbe->lock);
-
- pmbe->vpn = vpn;
- pmbe->ppn = ppn;
- pmbe->flags = flags;
- pmbe->entry = pos;
-
- return pmbe;
-
-out:
- write_unlock_irqrestore(&pmb_rwlock, irqflags);
- return ret;
-}
-
-static void pmb_free(struct pmb_entry *pmbe)
-{
- __clear_bit(pmbe->entry, pmb_map);
-
- pmbe->entry = PMB_NO_ENTRY;
- pmbe->link = NULL;
-}
-
-/*
- * Must be run uncached.
- */
-static void __set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- jump_to_uncached();
-
- /* Set V-bit */
- __raw_writel(pmbe->vpn | PMB_V, addr);
- __raw_writel(pmbe->ppn | pmbe->flags | PMB_V, data);
-
- back_to_cached();
-}
-
-static void __clear_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long addr, data;
- unsigned long addr_val, data_val;
-
- addr = mk_pmb_addr(pmbe->entry);
- data = mk_pmb_data(pmbe->entry);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /* Clear V-bit */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
-}
-
-#ifdef CONFIG_PM
-static void set_pmb_entry(struct pmb_entry *pmbe)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
- __set_pmb_entry(pmbe);
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
-}
-#endif /* CONFIG_PM */
-
-int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
- unsigned long size, pgprot_t prot)
-{
- struct pmb_entry *pmbp, *pmbe;
- unsigned long orig_addr, orig_size;
- unsigned long flags, pmb_flags;
- int i, mapped;
-
- if (size < SZ_16M)
- return -EINVAL;
- if (!pmb_addr_valid(vaddr, size))
- return -EFAULT;
- if (pmb_mapping_exists(vaddr, phys, size))
- return 0;
-
- orig_addr = vaddr;
- orig_size = size;
-
- flush_tlb_kernel_range(vaddr, vaddr + size);
-
- pmb_flags = pgprot_to_pmb_flags(prot);
- pmbp = NULL;
-
- do {
- for (i = mapped = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- if (size < pmb_sizes[i].size)
- continue;
-
- pmbe = pmb_alloc(vaddr, phys, pmb_flags |
- pmb_sizes[i].flag, PMB_NO_ENTRY);
- if (IS_ERR(pmbe)) {
- pmb_unmap_entry(pmbp, mapped);
- return PTR_ERR(pmbe);
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = pmb_sizes[i].size;
-
- __set_pmb_entry(pmbe);
-
- phys += pmbe->size;
- vaddr += pmbe->size;
- size -= pmbe->size;
-
- /*
- * Link adjacent entries that span multiple PMB
- * entries for easier tear-down.
- */
- if (likely(pmbp)) {
- raw_spin_lock_nested(&pmbp->lock,
- SINGLE_DEPTH_NESTING);
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- /*
- * Instead of trying smaller sizes on every
- * iteration (even if we succeed in allocating
- * space), try using pmb_sizes[i].size again.
- */
- i--;
- mapped++;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
- } while (size >= SZ_16M);
-
- flush_cache_vmap(orig_addr, orig_addr + orig_size);
-
- return 0;
-}
-
-void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
- pgprot_t prot, void *caller)
-{
- unsigned long vaddr;
- phys_addr_t offset, last_addr;
- phys_addr_t align_mask;
- unsigned long aligned;
- struct vm_struct *area;
- int i, ret;
-
- if (!pmb_iomapping_enabled)
- return NULL;
-
- /*
- * Small mappings need to go through the TLB.
- */
- if (size < SZ_16M)
- return ERR_PTR(-EINVAL);
- if (!pmb_prot_valid(prot))
- return ERR_PTR(-EINVAL);
-
- for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
- if (size >= pmb_sizes[i].size)
- break;
-
- last_addr = phys + size;
- align_mask = ~(pmb_sizes[i].size - 1);
- offset = phys & ~align_mask;
- phys &= align_mask;
- aligned = ALIGN(last_addr, pmb_sizes[i].size) - phys;
-
- /*
- * XXX: This should really start from uncached_end, but this
- * causes the MMU to reset, so for now we restrict it to the
- * 0xb000...0xc000 range.
- */
- area = __get_vm_area_caller(aligned, VM_IOREMAP, 0xb0000000,
- P3SEG, caller);
- if (!area)
- return NULL;
-
- area->phys_addr = phys;
- vaddr = (unsigned long)area->addr;
-
- ret = pmb_bolt_mapping(vaddr, phys, size, prot);
- if (unlikely(ret != 0))
- return ERR_PTR(ret);
-
- return (void __iomem *)(offset + (char *)vaddr);
-}
-
-int pmb_unmap(void __iomem *addr)
-{
- struct pmb_entry *pmbe = NULL;
- unsigned long vaddr = (unsigned long __force)addr;
- int i, found = 0;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- if (pmbe->vpn == vaddr) {
- found = 1;
- break;
- }
- }
- }
-
- read_unlock(&pmb_rwlock);
-
- if (found) {
- pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
- return 0;
- }
-
- return -EINVAL;
-}
-
-static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- do {
- struct pmb_entry *pmblink = pmbe;
-
- /*
- * We may be called before this pmb_entry has been
- * entered into the PMB table via set_pmb_entry(), but
- * that's OK because we've allocated a unique slot for
- * this entry in pmb_alloc() (even if we haven't filled
- * it yet).
- *
- * Therefore, calling __clear_pmb_entry() is safe as no
- * other mapping can be using that slot.
- */
- __clear_pmb_entry(pmbe);
-
- flush_cache_vunmap(pmbe->vpn, pmbe->vpn + pmbe->size);
-
- pmbe = pmblink->link;
-
- pmb_free(pmblink);
- } while (pmbe && --depth);
-}
-
-static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
-{
- unsigned long flags;
-
- if (unlikely(!pmbe))
- return;
-
- write_lock_irqsave(&pmb_rwlock, flags);
- __pmb_unmap_entry(pmbe, depth);
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-static void __init pmb_notify(void)
-{
- int i;
-
- pr_info("PMB: boot mappings:\n");
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- pr_info(" 0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
- pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
- pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-/*
- * Sync our software copy of the PMB mappings with those in hardware. The
- * mappings in the hardware PMB were either set up by the bootloader or
- * very early on by the kernel.
- */
-static void __init pmb_synchronize(void)
-{
- struct pmb_entry *pmbp = NULL;
- int i, j;
-
- /*
- * Run through the initial boot mappings, log the established
- * ones, and blow away anything that falls outside of the valid
- * PPN range. Specifically, we only care about existing mappings
- * that impact the cached/uncached sections.
- *
- * Note that touching these can be a bit of a minefield; the boot
- * loader can establish multi-page mappings with the same caching
- * attributes, so we need to ensure that we aren't modifying a
- * mapping that we're presently executing from, or may execute
- * from in the case of straddling page boundaries.
- *
- * In the future we will have to tidy up after the boot loader by
- * jumping between the cached and uncached mappings and tearing
- * down alternating mappings while executing from the other.
- */
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned long addr_val, data_val;
- unsigned long ppn, vpn, flags;
- unsigned long irqflags;
- unsigned int size;
- struct pmb_entry *pmbe;
-
- addr = mk_pmb_addr(i);
- data = mk_pmb_data(i);
-
- addr_val = __raw_readl(addr);
- data_val = __raw_readl(data);
-
- /*
- * Skip over any bogus entries
- */
- if (!(data_val & PMB_V) || !(addr_val & PMB_V))
- continue;
-
- ppn = data_val & PMB_PFN_MASK;
- vpn = addr_val & PMB_PFN_MASK;
-
- /*
- * Only preserve in-range mappings.
- */
- if (!pmb_ppn_in_range(ppn)) {
- /*
- * Invalidate anything out of bounds.
- */
- writel_uncached(addr_val & ~PMB_V, addr);
- writel_uncached(data_val & ~PMB_V, data);
- continue;
- }
-
- /*
- * Update the caching attributes if necessary
- */
- if (data_val & PMB_C) {
- data_val &= ~PMB_CACHE_MASK;
- data_val |= pmb_cache_flags();
-
- writel_uncached(data_val, data);
- }
-
- size = data_val & PMB_SZ_MASK;
- flags = size | (data_val & PMB_CACHE_MASK);
-
- pmbe = pmb_alloc(vpn, ppn, flags, i);
- if (IS_ERR(pmbe)) {
- WARN_ON_ONCE(1);
- continue;
- }
-
- raw_spin_lock_irqsave(&pmbe->lock, irqflags);
-
- for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
- if (pmb_sizes[j].flag == size)
- pmbe->size = pmb_sizes[j].size;
-
- if (pmbp) {
- raw_spin_lock_nested(&pmbp->lock, SINGLE_DEPTH_NESTING);
- /*
- * Compare the previous entry against the current one to
- * see if the entries span a contiguous mapping. If so,
- * setup the entry links accordingly. Compound mappings
- * are later coalesced.
- */
- if (pmb_can_merge(pmbp, pmbe))
- pmbp->link = pmbe;
- raw_spin_unlock(&pmbp->lock);
- }
-
- pmbp = pmbe;
-
- raw_spin_unlock_irqrestore(&pmbe->lock, irqflags);
- }
-}
-
-static void __init pmb_merge(struct pmb_entry *head)
-{
- unsigned long span, newsize;
- struct pmb_entry *tail;
- int i = 1, depth = 0;
-
- span = newsize = head->size;
-
- tail = head->link;
- while (tail) {
- span += tail->size;
-
- if (pmb_size_valid(span)) {
- newsize = span;
- depth = i;
- }
-
- /* This is the end of the line.. */
- if (!tail->link)
- break;
-
- tail = tail->link;
- i++;
- }
-
- /*
- * The merged page size must be valid.
- */
- if (!depth || !pmb_size_valid(newsize))
- return;
-
- head->flags &= ~PMB_SZ_MASK;
- head->flags |= pmb_size_to_flags(newsize);
-
- head->size = newsize;
-
- __pmb_unmap_entry(head->link, depth);
- __set_pmb_entry(head);
-}
-
-static void __init pmb_coalesce(void)
-{
- unsigned long flags;
- int i;
-
- write_lock_irqsave(&pmb_rwlock, flags);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- /*
- * We're only interested in compound mappings
- */
- if (!pmbe->link)
- continue;
-
- /*
- * Nothing to do if it already uses the largest possible
- * page size.
- */
- if (pmbe->size == SZ_512M)
- continue;
-
- pmb_merge(pmbe);
- }
-
- write_unlock_irqrestore(&pmb_rwlock, flags);
-}
-
-#ifdef CONFIG_UNCACHED_MAPPING
-static void __init pmb_resize(void)
-{
- int i;
-
- /*
- * If the uncached mapping was constructed by the kernel, it will
- * already be a reasonable size.
- */
- if (uncached_size == SZ_16M)
- return;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- struct pmb_entry *pmbe;
- unsigned long flags;
-
- if (!test_bit(i, pmb_map))
- continue;
-
- pmbe = &pmb_entry_list[i];
-
- if (pmbe->vpn != uncached_start)
- continue;
-
- /*
- * Found it, now resize it.
- */
- raw_spin_lock_irqsave(&pmbe->lock, flags);
-
- pmbe->size = SZ_16M;
- pmbe->flags &= ~PMB_SZ_MASK;
- pmbe->flags |= pmb_size_to_flags(pmbe->size);
-
- uncached_resize(pmbe->size);
-
- __set_pmb_entry(pmbe);
-
- raw_spin_unlock_irqrestore(&pmbe->lock, flags);
- }
-
- read_unlock(&pmb_rwlock);
-}
-#endif
-
-static int __init early_pmb(char *p)
-{
- if (!p)
- return 0;
-
- if (strstr(p, "iomap"))
- pmb_iomapping_enabled = 1;
-
- return 0;
-}
-early_param("pmb", early_pmb);
-
-void __init pmb_init(void)
-{
- /* Synchronize software state */
- pmb_synchronize();
-
- /* Attempt to combine compound mappings */
- pmb_coalesce();
-
-#ifdef CONFIG_UNCACHED_MAPPING
- /* Resize initial mappings, if necessary */
- pmb_resize();
-#endif
-
- /* Log them */
- pmb_notify();
-
- writel_uncached(0, PMB_IRMCR);
-
- /* Flush out the TLB */
- local_flush_tlb_all();
- ctrl_barrier();
-}
-
-bool __in_29bit_mode(void)
-{
- return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
-}
-
-static int pmb_debugfs_show(struct seq_file *file, void *iter)
-{
- int i;
-
- seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
- "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
- seq_printf(file, "ety vpn ppn size flags\n");
-
- for (i = 0; i < NR_PMB_ENTRIES; i++) {
- unsigned long addr, data;
- unsigned int size;
- char *sz_str = NULL;
-
- addr = __raw_readl(mk_pmb_addr(i));
- data = __raw_readl(mk_pmb_data(i));
-
- size = data & PMB_SZ_MASK;
- sz_str = (size == PMB_SZ_16M) ? " 16MB":
- (size == PMB_SZ_64M) ? " 64MB":
- (size == PMB_SZ_128M) ? "128MB":
- "512MB";
-
- /* 02: V 0x88 0x08 128MB C CB B */
- seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
- i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
- (addr >> 24) & 0xff, (data >> 24) & 0xff,
- sz_str, (data & PMB_C) ? 'C' : ' ',
- (data & PMB_WT) ? "WT" : "CB",
- (data & PMB_UB) ? "UB" : " B");
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(pmb_debugfs);
-
-static int __init pmb_debugfs_init(void)
-{
- debugfs_create_file("pmb", S_IFREG | S_IRUGO, arch_debugfs_dir, NULL,
- &pmb_debugfs_fops);
- return 0;
-}
-subsys_initcall(pmb_debugfs_init);
-
-#ifdef CONFIG_PM
-static void pmb_syscore_resume(void)
-{
- struct pmb_entry *pmbe;
- int i;
-
- read_lock(&pmb_rwlock);
-
- for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
- if (test_bit(i, pmb_map)) {
- pmbe = &pmb_entry_list[i];
- set_pmb_entry(pmbe);
- }
- }
-
- read_unlock(&pmb_rwlock);
-}
-
-static struct syscore_ops pmb_syscore_ops = {
- .resume = pmb_syscore_resume,
-};
-
-static int __init pmb_sysdev_init(void)
-{
- register_syscore_ops(&pmb_syscore_ops);
- return 0;
-}
-subsys_initcall(pmb_sysdev_init);
-#endif
diff --git a/arch/sh/mm/sram.c b/arch/sh/mm/sram.c
deleted file mode 100644
index 2d8fa718d55e74..00000000000000
--- a/arch/sh/mm/sram.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SRAM pool for tiny memories not otherwise managed.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <asm/sram.h>
-
-/*
- * This provides a standard SRAM pool for tiny memories that can be
- * added either by the CPU or the platform code. Typical SRAM sizes
- * to be inserted in to the pool will generally be less than the page
- * size, with anything more reasonably sized handled as a NUMA memory
- * node.
- */
-struct gen_pool *sram_pool;
-
-static int __init sram_pool_init(void)
-{
- /*
- * This is a global pool, we don't care about node locality.
- */
- sram_pool = gen_pool_create(1, -1);
- if (unlikely(!sram_pool))
- return -ENOMEM;
-
- return 0;
-}
-core_initcall(sram_pool_init);
diff --git a/arch/sh/mm/tlb-debugfs.c b/arch/sh/mm/tlb-debugfs.c
deleted file mode 100644
index 11c6148283f3c7..00000000000000
--- a/arch/sh/mm/tlb-debugfs.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/sh/mm/tlb-debugfs.c
- *
- * debugfs ops for SH-4 ITLB/UTLBs.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-enum tlb_type {
- TLB_TYPE_ITLB,
- TLB_TYPE_UTLB,
-};
-
-static struct {
- int bits;
- const char *size;
-} tlb_sizes[] = {
- { 0x0, " 1KB" },
- { 0x1, " 4KB" },
- { 0x2, " 8KB" },
- { 0x4, " 64KB" },
- { 0x5, "256KB" },
- { 0x7, " 1MB" },
- { 0x8, " 4MB" },
- { 0xc, " 64MB" },
-};
-
-static int tlb_seq_show(struct seq_file *file, void *iter)
-{
- unsigned int tlb_type = (unsigned int)file->private;
- unsigned long addr1, addr2, data1, data2;
- unsigned long flags;
- unsigned long mmucr;
- unsigned int nentries, entry;
- unsigned int urb;
-
- mmucr = __raw_readl(MMUCR);
- if ((mmucr & 0x1) == 0) {
- seq_printf(file, "address translation disabled\n");
- return 0;
- }
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- local_irq_save(flags);
- jump_to_uncached();
-
- urb = (mmucr & MMUCR_URB) >> MMUCR_URB_SHIFT;
-
- /* Make the "entry >= urb" test fail. */
- if (urb == 0)
- urb = MMUCR_URB_NENTRIES + 1;
-
- if (tlb_type == TLB_TYPE_ITLB) {
- addr1 = MMU_ITLB_ADDRESS_ARRAY;
- addr2 = MMU_ITLB_ADDRESS_ARRAY2;
- data1 = MMU_ITLB_DATA_ARRAY;
- data2 = MMU_ITLB_DATA_ARRAY2;
- nentries = 4;
- } else {
- addr1 = MMU_UTLB_ADDRESS_ARRAY;
- addr2 = MMU_UTLB_ADDRESS_ARRAY2;
- data1 = MMU_UTLB_DATA_ARRAY;
- data2 = MMU_UTLB_DATA_ARRAY2;
- nentries = 64;
- }
-
- seq_printf(file, "entry: vpn ppn asid size valid wired\n");
-
- for (entry = 0; entry < nentries; entry++) {
- unsigned long vpn, ppn, asid, size;
- unsigned long valid;
- unsigned long val;
- const char *sz = " ?";
- int i;
-
- val = __raw_readl(addr1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- vpn = val & 0xfffffc00;
- valid = val & 0x100;
-
- val = __raw_readl(addr2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- asid = val & MMU_CONTEXT_ASID_MASK;
-
- val = __raw_readl(data1 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- ppn = (val & 0x0ffffc00) << 4;
-
- val = __raw_readl(data2 | (entry << MMU_TLB_ENTRY_SHIFT));
- ctrl_barrier();
- size = (val & 0xf0) >> 4;
-
- for (i = 0; i < ARRAY_SIZE(tlb_sizes); i++) {
- if (tlb_sizes[i].bits == size)
- break;
- }
-
- if (i != ARRAY_SIZE(tlb_sizes))
- sz = tlb_sizes[i].size;
-
- seq_printf(file, "%2d: 0x%08lx 0x%08lx %5lu %s %s %s\n",
- entry, vpn, ppn, asid,
- sz, valid ? "V" : "-",
- (urb <= entry) ? "W" : "-");
- }
-
- back_to_cached();
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int tlb_debugfs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, tlb_seq_show, inode->i_private);
-}
-
-static const struct file_operations tlb_debugfs_fops = {
- .owner = THIS_MODULE,
- .open = tlb_debugfs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init tlb_debugfs_init(void)
-{
- debugfs_create_file("itlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_ITLB, &tlb_debugfs_fops);
- debugfs_create_file("utlb", S_IRUSR, arch_debugfs_dir,
- (void *)TLB_TYPE_UTLB, &tlb_debugfs_fops);
- return 0;
-}
-module_init(tlb_debugfs_init);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
deleted file mode 100644
index 4db21adfe5deba..00000000000000
--- a/arch/sh/mm/tlb-pteaex.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/sh/mm/tlb-pteaex.c
- *
- * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
- *
- * Copyright (C) 2009 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = address & MMU_VPN_MASK;
- __raw_writel(vpn, MMU_PTEH);
-
- /* Set PTEAEX */
- __raw_writel(get_asid(), MMU_PTEAEX);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-/*
- * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
- * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
- * address arrays. In compat mode the second array is inaccessible, while
- * in extended mode, the legacy 8-bit ASID field in address array 1 has
- * undefined behaviour.
- */
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- jump_to_uncached();
- __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
- __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
deleted file mode 100644
index fb400afc2a496a..00000000000000
--- a/arch/sh/mm/tlb-sh3.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh3.c
- *
- * SH-3 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte_val(pte);
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
- int i, ways = MMU_NTLB_WAYS;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000);
- data = (page & 0xfffe0000) | asid; /* VALID bit is off */
-
- if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) {
- addr |= MMU_PAGE_ASSOC_BIT;
- ways = 1; /* we already know the way .. */
- }
-
- for (i = 0; i < ways; i++)
- __raw_writel(data, addr + (i << 8));
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
-
- /*
- * Flush all the TLB.
- *
- * Write to the MMU control register's bit:
- * TF-bit for SH-3, TI-bit for SH-4.
- * It's same position, bit #2.
- */
- local_irq_save(flags);
- status = __raw_readl(MMUCR);
- status |= 0x04;
- __raw_writel(status, MMUCR);
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
deleted file mode 100644
index aa0a9f4680a1b1..00000000000000
--- a/arch/sh/mm/tlb-sh4.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/sh/mm/tlb-sh4.c
- *
- * SH-4 specific TLB operations
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- unsigned long flags, pteval, vpn;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (vma && current->active_mm != vma->vm_mm)
- return;
-
- local_irq_save(flags);
-
- /* Set PTEH register */
- vpn = (address & MMU_VPN_MASK) | get_asid();
- __raw_writel(vpn, MMU_PTEH);
-
- pteval = pte.pte_low;
-
- /* Set PTEA register */
-#ifdef CONFIG_X2TLB
- /*
- * For the extended mode TLB this is trivial, only the ESZ and
- * EPR bits need to be written out to PTEA, with the remainder of
- * the protection bits (with the exception of the compat-mode SZ
- * and PR bits, which are cleared) being written out in PTEL.
- */
- __raw_writel(pte.pte_high, MMU_PTEA);
-#else
- if (cpu_data->flags & CPU_HAS_PTEA) {
- /* The last 3 bits and the first one of pteval contains
- * the PTEA timing control and space attribute bits
- */
- __raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
- }
-#endif
-
- /* Set PTEL register */
- pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_CACHE_WRITETHROUGH
- pteval |= _PAGE_WT;
-#endif
- /* conveniently, we want all the software flags to be 0 anyway */
- __raw_writel(pteval, MMU_PTEL);
-
- /* Load the TLB */
- asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
- unsigned long addr, data;
-
- /*
- * NOTE: PTEH.ASID should be set to this MM
- * _AND_ we need to write ASID to the array.
- *
- * It would be simple if we didn't need to set PTEH.ASID...
- */
- addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
- data = page | asid; /* VALID bit is off */
- jump_to_uncached();
- __raw_writel(data, addr);
- back_to_cached();
-}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
- int i;
-
- /*
- * Flush all the TLB.
- */
- local_irq_save(flags);
- jump_to_uncached();
-
- status = __raw_readl(MMUCR);
- status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
-
- if (status == 0)
- status = MMUCR_URB_NENTRIES;
-
- for (i = 0; i < status; i++)
- __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
-
- for (i = 0; i < 4; i++)
- __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
-
- back_to_cached();
- ctrl_barrier();
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c
deleted file mode 100644
index c92ce20db39bf4..00000000000000
--- a/arch/sh/mm/tlb-urb.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/sh/mm/tlb-urb.c
- *
- * TLB entry wiring helpers for URB-equipped parts.
- *
- * Copyright (C) 2010 Matt Fleming
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/*
- * Load the entry for 'addr' into the TLB and wire the entry.
- */
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URC;
-
- /*
- * Make sure we're not trying to wire the last TLB entry slot.
- */
- BUG_ON(!--urb);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- /*
- * Insert this entry into the highest non-wired TLB slot (via
- * the URC field).
- */
- status |= (urb << MMUCR_URC_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- /* Load the entry into the TLB */
- __update_tlb(vma, addr, pte);
-
- /* ... and wire it up. */
- status = __raw_readl(MMUCR);
-
- status &= ~MMUCR_URB;
- status |= (urb << MMUCR_URB_SHIFT);
-
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
-
-/*
- * Unwire the last wired TLB entry.
- *
- * It should also be noted that it is not possible to wire and unwire
- * TLB entries in an arbitrary order. If you wire TLB entry N, followed
- * by entry N+1, you must unwire entry N+1 first, then entry N. In this
- * respect, it works like a stack or LIFO queue.
- */
-void tlb_unwire_entry(void)
-{
- unsigned long status, flags;
- int urb;
-
- local_irq_save(flags);
-
- status = __raw_readl(MMUCR);
- urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URB;
-
- /*
- * Make sure we're not trying to unwire a TLB entry when none
- * have been wired.
- */
- BUG_ON(urb++ == MMUCR_URB_NENTRIES);
-
- urb = urb % MMUCR_URB_NENTRIES;
-
- status |= (urb << MMUCR_URB_SHIFT);
- __raw_writel(status, MMUCR);
- ctrl_barrier();
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlbex_32.c b/arch/sh/mm/tlbex_32.c
deleted file mode 100644
index 1c53868632ee4c..00000000000000
--- a/arch/sh/mm/tlbex_32.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * TLB miss handler for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-#include <asm/mmu_context.h>
-#include <asm/thread_info.h>
-
-/*
- * Called with interrupts disabled.
- */
-asmlinkage int __kprobes
-handle_tlbmiss(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
- pgd_t *pgd;
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
-
- /*
- * We don't take page faults for P1, P2, and parts of P4, these
- * are always mapped, whether it be due to legacy behaviour in
- * 29-bit mode, or due to PMB configuration in 32-bit mode.
- */
- if (address >= P3SEG && address < P3_ADDR_MAX) {
- pgd = pgd_offset_k(address);
- } else {
- if (unlikely(address >= TASK_SIZE || !current->mm))
- return 1;
-
- pgd = pgd_offset(current->mm, address);
- }
-
- p4d = p4d_offset(pgd, address);
- if (p4d_none_or_clear_bad(p4d))
- return 1;
- pud = pud_offset(p4d, address);
- if (pud_none_or_clear_bad(pud))
- return 1;
- pmd = pmd_offset(pud, address);
- if (pmd_none_or_clear_bad(pmd))
- return 1;
- pte = pte_offset_kernel(pmd, address);
- entry = *pte;
- if (unlikely(pte_none(entry) || pte_not_present(entry)))
- return 1;
- if (unlikely(error_code && !pte_write(entry)))
- return 1;
-
- if (error_code)
- entry = pte_mkdirty(entry);
- entry = pte_mkyoung(entry);
-
- set_pte(pte, entry);
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
- /*
- * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
- * the case of an initial page write exception, so we need to
- * flush it in order to avoid potential TLB entry duplication.
- */
- if (error_code == FAULT_CODE_INITIAL)
- local_flush_tlb_one(get_asid(), address & PAGE_MASK);
-#endif
-
- set_thread_fault_code(error_code);
- update_mmu_cache(NULL, address, pte);
-
- return 0;
-}
diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c
deleted file mode 100644
index a6a20d6de4c0b9..00000000000000
--- a/arch/sh/mm/tlbflush_32.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * TLB flushing operations for SH with an MMU.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- unsigned int cpu = smp_processor_id();
-
- if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) {
- unsigned long flags;
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, vma->vm_mm);
- page &= PAGE_MASK;
-
- local_irq_save(flags);
- if (vma->vm_mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- local_flush_tlb_one(asid, page);
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- unsigned int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- } else {
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = cpu_asid(cpu, mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- if (mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- local_flush_tlb_all();
- } else {
- unsigned long asid;
- unsigned long saved_asid = get_asid();
-
- asid = cpu_asid(cpu, &init_mm);
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- set_asid(asid);
- while (start < end) {
- local_flush_tlb_one(asid, start);
- start += PAGE_SIZE;
- }
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- unsigned int cpu = smp_processor_id();
-
- /* Invalidate all TLB of this process. */
- /* Instead of invalidating each TLB, we get new MMU context. */
- if (cpu_context(cpu, mm) != NO_CONTEXT) {
- unsigned long flags;
-
- local_irq_save(flags);
- cpu_context(cpu, mm) = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm, cpu);
- local_irq_restore(flags);
- }
-}
-
-void __flush_tlb_global(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- /*
- * This is the most destructive of the TLB flushing options,
- * and will tear down all of the UTLB/ITLB mappings, including
- * wired entries.
- */
- __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
-
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
deleted file mode 100644
index bd1585e8efed92..00000000000000
--- a/arch/sh/mm/uncached.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sizes.h>
-#include <asm/page.h>
-#include <asm/addrspace.h>
-
-/*
- * This is the offset of the uncached section from its cached alias.
- *
- * Legacy platforms handle trivial transitions between cached and
- * uncached segments by making use of the 1:1 mapping relationship in
- * 512MB lowmem, others via a special uncached mapping.
- *
- * Default value only valid in 29 bit mode, in 32bit mode this will be
- * updated by the early PMB initialization code.
- */
-unsigned long cached_to_uncached = SZ_512M;
-unsigned long uncached_size = SZ_512M;
-unsigned long uncached_start, uncached_end;
-EXPORT_SYMBOL(uncached_start);
-EXPORT_SYMBOL(uncached_end);
-
-int virt_addr_uncached(unsigned long kaddr)
-{
- return (kaddr >= uncached_start) && (kaddr < uncached_end);
-}
-EXPORT_SYMBOL(virt_addr_uncached);
-
-void __init uncached_init(void)
-{
-#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU)
- uncached_start = P2SEG;
-#else
- uncached_start = memory_end;
-#endif
- uncached_end = uncached_start + uncached_size;
-}
-
-void __init uncached_resize(unsigned long size)
-{
- uncached_size = size;
- uncached_end = uncached_start + uncached_size;
-}
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
deleted file mode 100644
index e5ba31c79fe0af..00000000000000
--- a/arch/sh/tools/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# arch/sh/tools/Makefile
-#
-# Copyright (C) 2003 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Shamelessly cloned from ARM.
-#
-
-include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
- @echo ' Generating $@'
- $(Q)mkdir -p $(dir $@)
- $(Q)LC_ALL=C $(AWK) -f $^ > $@
diff --git a/arch/sh/tools/gen-mach-types b/arch/sh/tools/gen-mach-types
deleted file mode 100644
index 6d7c2d8eaf5504..00000000000000
--- a/arch/sh/tools/gen-mach-types
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/awk
-# SPDX-License-Identifier: GPL-2.0
-#
-# Awk script to generate include/generated/machtypes.h
-# Heavily based on arch/arm/tools/gen-mach-types
-#
-BEGIN { nr = 0 }
-/^#/ { next }
-/^[ ]*$/ { next }
-
-NF == 2 {
- mach[nr] = $1;
- config[nr] = "CONFIG_"$2;
- nr++;
- }
-
-END {
- printf("/*\n");
- printf(" * Automagically generated, don't touch.\n");
- printf(" */\n");
- printf("#ifndef __ASM_SH_MACHTYPES_H\n");
- printf("#define __ASM_SH_MACHTYPES_H\n");
- printf("\n");
- printf("/*\n");
- printf(" * We'll use the following MACH_xxx defs for placeholders for the time\n");
- printf(" * being .. these will all go away once sh_machtype is assigned per-board.\n");
- printf(" *\n");
- printf(" * For now we leave things the way they are for backwards compatibility.\n");
- printf(" */\n");
- printf("\n");
- printf("/* Mach types */\n");
-
- for (i = 0; i < nr; i++) {
- printf("#ifdef %s\n", config[i]);
- printf(" #define MACH_%s\t\t1\n", mach[i]);
- printf("#else\n");
- printf(" #define MACH_%s\t\t0\n", mach[i]);
- printf("#endif\n");
- }
-
- printf("\n");
- printf("/* Machtype checks */\n");
- for (i = 0; i < nr; i++)
- printf("#define mach_is_%s()\t\t\t(MACH_%s)\n",
- tolower(mach[i]), mach[i]);
- printf("\n");
- printf("#endif /* __ASM_SH_MACHTYPES_H */\n");
- }
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
deleted file mode 100644
index 29e648855d509f..00000000000000
--- a/arch/sh/tools/mach-types
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# MACH_<xxx> CONFIG_<xxx>
-#
-
-#
-# List of board groups.
-#
-SE SH_SOLUTION_ENGINE
-HIGHLANDER SH_HIGHLANDER
-RTS7751R2D SH_RTS7751R2D
-RSK SH_RSK
-ALPHA_BOARD SH_ALPHA_BOARD
-
-#
-# List of companion chips / MFDs.
-#
-HD64461 HD64461
-
-#
-# List of boards.
-#
-7206SE SH_7206_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
-7619SE SH_7619_SOLUTION_ENGINE
-7721SE SH_7721_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7724SE SH_7724_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7780SE SH_7780_SOLUTION_ENGINE
-HP6XX SH_HP6XX
-DREAMCAST SH_DREAMCAST
-SNAPGEAR SH_SECUREEDGE5410
-EDOSK7705 SH_EDOSK7705
-EDOSK7760 SH_EDOSK7760
-SDK7786 SH_SDK7786
-SH4202_MICRODEV SH_SH4202_MICRODEV
-SH03 SH_SH03
-LANDISK SH_LANDISK
-R7780RP SH_R7780RP
-R7780MP SH_R7780MP
-R7785RP SH_R7785RP
-TITAN SH_TITAN
-SHMIN SH_SHMIN
-LBOXRE2 SH_LBOX_RE2
-X3PROTO SH_X3PROTO
-MAGICPANELR2 SH_MAGIC_PANEL_R2
-R2D_PLUS RTS7751R2D_PLUS
-R2D_1 RTS7751R2D_1
-SDK7780 SH_SDK7780
-MIGOR SH_MIGOR
-RSK7201 SH_RSK7201
-RSK7203 SH_RSK7203
-RSK7264 SH_RSK7264
-RSK7269 SH_RSK7269
-AP325RXA SH_AP325RXA
-SH2007 SH_SH2007
-SH7757LCR SH_SH7757LCR
-SH7763RDP SH_SH7763RDP
-SH7785LCR SH_SH7785LCR
-SH7785LCR_PT SH_SH7785LCR_PT
-URQUELL SH_URQUELL
-ESPT SH_ESPT
-POLARIS SH_POLARIS
-KFR2R09 SH_KFR2R09
-ECOVEC SH_ECOVEC
-APSH4A3A SH_APSH4A3A
-APSH4AD0A SH_APSH4AD0A
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7b952aa52c0b99..7fed3529bbaf82 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -26,10 +26,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_cmt_device;
/*
@@ -1170,10 +1166,6 @@ static void __exit sh_cmt_exit(void)
platform_driver_unregister(&sh_cmt_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_cmt_device_driver);
-#endif
-
subsys_initcall(sh_cmt_init);
module_exit(sh_cmt_exit);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 169a1fccc49749..e81e978513f80e 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -23,10 +23,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
struct sh_mtu2_device;
struct sh_mtu2_channel {
@@ -521,10 +517,6 @@ static void __exit sh_mtu2_exit(void)
platform_driver_unregister(&sh_mtu2_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_mtu2_device_driver);
-#endif
-
subsys_initcall(sh_mtu2_init);
module_exit(sh_mtu2_exit);
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index b00dec0655cb28..596e9146ad54e9 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -24,10 +24,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#ifdef CONFIG_SUPERH
-#include <asm/platform_early.h>
-#endif
-
enum sh_tmu_model {
SH_TMU,
SH_TMU_SH3,
@@ -670,10 +666,6 @@ static void __exit sh_tmu_exit(void)
platform_driver_unregister(&sh_tmu_device_driver);
}
-#ifdef CONFIG_SUPERH
-sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
-#endif
-
subsys_initcall(sh_tmu_init);
module_exit(sh_tmu_exit);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a7bfddf08fa7ba..22602c512a6e50 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1027,7 +1027,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
@@ -1112,7 +1112,7 @@ config I2C_SYNQUACER
config I2C_TEGRA
tristate "NVIDIA Tegra internal I2C controller"
- depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC))
+ depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SPARC))
# COMPILE_TEST needs architectures with readsX()/writesX() primitives
help
If you say yes to this option, support will be included for the
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index ed788e991f74b3..0231672a7e1c32 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_RENESAS_CEU
tristate "Renesas Capture Engine Unit (CEU) driver"
depends on V4L_PLATFORM_DRIVERS
depends on VIDEO_DEV
- depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
+ depends on ARCH_R7S72100 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5e19a961c34d7b..4d421d4030b7c9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -720,7 +720,7 @@ config MMC_TMIO
config MMC_SDHI
tristate "Renesas SDHI SD/SDIO controller support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select MMC_TMIO_CORE
select RESET_CONTROLLER if ARCH_RENESAS
help
@@ -730,7 +730,7 @@ config MMC_SDHI
config MMC_SDHI_SYS_DMAC
tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
depends on MMC_SDHI
- default MMC_SDHI if (SUPERH || ARM)
+ default MMC_SDHI if ARM
help
This provides DMA support for SDHI SD/SDIO controllers
using SYS-DMAC via DMA Engine. This supports the controllers
@@ -882,7 +882,7 @@ config MMC_DW_ROCKCHIP
config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF) found in various
Renesas SoCs for SH and ARM architectures.
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 0fd4c9d644dd51..96b9a19697b985 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -427,21 +427,12 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host)
host->dma_active = false;
/* We can only either use DMA for both Tx and Rx or not use it at all */
- if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) {
- struct sh_mmcif_plat_data *pdata = dev->platform_data;
-
- host->chan_tx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_tx);
- host->chan_rx = sh_mmcif_request_dma_pdata(host,
- pdata->slave_id_rx);
- } else {
- host->chan_tx = dma_request_chan(dev, "tx");
- if (IS_ERR(host->chan_tx))
- host->chan_tx = NULL;
- host->chan_rx = dma_request_chan(dev, "rx");
- if (IS_ERR(host->chan_rx))
- host->chan_rx = NULL;
- }
+ host->chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(host->chan_tx))
+ host->chan_tx = NULL;
+ host->chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(host->chan_rx))
+ host->chan_rx = NULL;
dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx,
host->chan_rx);
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342f2..eb90de04c88419 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -31,7 +31,7 @@ config PCMCIA_AXNET
config AX88796
tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
- depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
+ depends on (ARM || MIPS || ZORRO || COMPILE_TEST)
select CRC32
select PHYLIB
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 3ceb57408ed0c0..c48164ec682f50 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_RENESAS
config SH_ETH
tristate "Renesas SuperH Ethernet support"
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select CRC32
select MII
select MDIO_BITBANG
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b97..a6ddc3d07534ad 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_SMSC
default y
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
ISA || MAC || MIPS || NIOS2 || PCI || \
- PCMCIA || SUPERH || XTENSA || COMPILE_TEST
+ PCMCIA || XTENSA || COMPILE_TEST
help
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -40,7 +40,7 @@ config SMC91X
select MII
depends on !OF || GPIOLIB
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
- MIPS || NIOS2 || SUPERH || XTENSA || COMPILE_TEST
+ MIPS || NIOS2 || XTENSA || COMPILE_TEST
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 677d2601d30571..db9e2c516b5ff1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1452,7 +1452,7 @@ config RTC_DRV_SA1100
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on SUPERH || ARCH_RENESAS
+ depends on ARCH_RENESAS
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors. This RTC is also found in RZ/A SoCs.
@@ -1544,7 +1544,7 @@ config RTC_DRV_GENERIC
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
+ depends on PARISC || M68K || PPC || COMPILE_TEST
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index cd146b5741431f..2151a3b7c5b986 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -25,15 +25,12 @@
#include <linux/log2.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#ifdef CONFIG_SUPERH
-#include <asm/rtc.h>
-#else
+
/* Default values for RZ/A RTC */
#define rtc_reg_size sizeof(u16)
#define RTC_BIT_INVERTED 0 /* no chip bugs */
#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
-#endif
#define DRV_NAME "sh-rtc"
@@ -537,19 +534,6 @@ static int __init sh_rtc_probe(struct platform_device *pdev)
rtc->capabilities = RTC_DEF_CAPABILITIES;
-#ifdef CONFIG_SUPERH
- if (dev_get_platdata(&pdev->dev)) {
- struct sh_rtc_platform_info *pinfo =
- dev_get_platdata(&pdev->dev);
-
- /*
- * Some CPUs have special capabilities in addition to the
- * default set. Add those in here.
- */
- rtc->capabilities |= pinfo->capabilities;
- }
-#endif
-
if (rtc->carry_irq <= 0) {
/* register shared periodic/carry/alarm irq */
ret = devm_request_irq(&pdev->dev, rtc->periodic_irq,
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3b1c0878bb8572..2c5226adf5e1d3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -809,7 +809,7 @@ config SPI_RPCIF
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for Renesas RSPI and QSPI blocks.
@@ -878,7 +878,7 @@ config SPI_SC18IS602
config SPI_SH_MSIOF
tristate "SuperH MSIOF SPI controller"
depends on HAVE_CLK
- depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c55b947f3cdbb7..32f8ffd423cbb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -641,7 +641,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -650,7 +650,6 @@ config SERIAL_SH_SCI_NR_UARTS
range 1 64 if 64BIT
range 1 32 if !64BIT
depends on SERIAL_SH_SCI
- default "10" if SUPERH
default "18" if ARCH_RENESAS
default "2"
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7bd0807209299b..cc475670181529 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -49,11 +49,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#ifdef CONFIG_SUPERH
-#include <asm/sh_bios.h>
-#include <asm/platform_early.h>
-#endif
-
#include "serial_mctrl_gpio.h"
#include "sh-sci.h"
@@ -3050,49 +3045,6 @@ static struct console serial_console = {
.data = &sci_uart_driver,
};
-#ifdef CONFIG_SUPERH
-static char early_serial_buf[32];
-
-static int early_serial_console_setup(struct console *co, char *options)
-{
- /*
- * This early console is always registered using the earlyprintk=
- * parameter, which does not call add_preferred_console(). Thus
- * @options is always NULL and the options for this early console
- * are passed using a custom buffer.
- */
- WARN_ON(options);
-
- return serial_console_setup(co, early_serial_buf);
-}
-
-static struct console early_serial_console = {
- .name = "early_ttySC",
- .write = serial_console_write,
- .setup = early_serial_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int sci_probe_earlyprintk(struct platform_device *pdev)
-{
- const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
-
- if (early_serial_console.data)
- return -EEXIST;
-
- early_serial_console.index = pdev->id;
-
- sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
-
- if (!strstr(early_serial_buf, "keep"))
- early_serial_console.flags |= CON_BOOT;
-
- register_console(&early_serial_console);
- return 0;
-}
-#endif
-
#define SCI_CONSOLE (&serial_console)
#else
@@ -3323,11 +3275,6 @@ static int sci_probe(struct platform_device *dev)
* the special early probe. We don't have sufficient device state
* to make it beyond this yet.
*/
-#ifdef CONFIG_SUPERH
- if (is_sh_early_platform_device(dev))
- return sci_probe_earlyprintk(dev);
-#endif
-
if (dev->dev.of_node) {
p = sci_parse_dt(dev, &dev_id);
if (IS_ERR(p))
@@ -3421,10 +3368,6 @@ static void __exit sci_exit(void)
uart_unregister_driver(&sci_uart_driver);
}
-#if defined(CONFIG_SUPERH) && defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-sh_early_platform_init_buffer("earlyprintk", &sci_driver,
- early_serial_buf, ARRAY_SIZE(early_serial_buf));
-#endif
#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
static struct plat_sci_port port_cfg __initdata;
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index be8313cdbac360..fa9082f941feeb 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1275,7 +1275,7 @@ static void kbd_bh(struct tasklet_struct *unused)
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
- defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+ defined(CONFIG_PARISC) ||\
(defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
static inline bool kbd_is_hw_raw(const struct input_dev *dev)
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index d6b3fef3e55b03..be240d11cfb49a 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -6,7 +6,7 @@
config USB_RENESAS_USBHS
tristate 'Renesas USBHS controller'
depends on USB_GADGET
- depends on ARCH_RENESAS || SUPERH || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in
help
Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 22cea5082ac461..9860caa3512816 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -7,7 +7,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 6d6f8c08792dc8..e75b514b721b3f 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -53,19 +53,4 @@ config LOGO_SUN_CLUT224
depends on SPARC
default y
-config LOGO_SUPERH_MONO
- bool "Black and white SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_VGA16
- bool "16-color SuperH Linux logo"
- depends on SUPERH
- default y
-
-config LOGO_SUPERH_CLUT224
- bool "224-color SuperH Linux logo"
- depends on SUPERH
- default y
-
endif # LOGO
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 895c60b8402ea1..c4f348fa400741 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -10,9 +10,6 @@ obj-$(CONFIG_LOGO_MAC_CLUT224) += logo_mac_clut224.o
obj-$(CONFIG_LOGO_PARISC_CLUT224) += logo_parisc_clut224.o
obj-$(CONFIG_LOGO_SGI_CLUT224) += logo_sgi_clut224.o
obj-$(CONFIG_LOGO_SUN_CLUT224) += logo_sun_clut224.o
-obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_superh_mono.o
-obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
-obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 141f15a9a45906..0269def4262117 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -52,10 +52,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_MONO
/* Generic Linux logo */
logo = &logo_linux_mono;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_MONO
- /* SuperH Linux logo */
- logo = &logo_superh_mono;
#endif
}
@@ -63,10 +59,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_LINUX_VGA16
/* Generic Linux logo */
logo = &logo_linux_vga16;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_VGA16
- /* SuperH Linux logo */
- logo = &logo_superh_vga16;
#endif
}
@@ -95,10 +87,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
#ifdef CONFIG_LOGO_SUN_CLUT224
/* Sun Linux logo */
logo = &logo_sun_clut224;
-#endif
-#ifdef CONFIG_LOGO_SUPERH_CLUT224
- /* SuperH Linux logo */
- logo = &logo_superh_clut224;
#endif
}
return logo;
diff --git a/drivers/video/logo/logo_superh_clut224.ppm b/drivers/video/logo/logo_superh_clut224.ppm
deleted file mode 100644
index 0241aacee18009..00000000000000
--- a/drivers/video/logo/logo_superh_clut224.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 224-color SuperH Linux logo
-80 80
-255
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 10 10 10 10 10 10
- 10 10 10 6 6 6 6 6 6 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 10 10 10 14 14 13
- 22 22 22 26 26 26 30 30 30 34 34 34
- 30 30 30 30 30 30 26 26 26 18 18 18
- 14 14 13 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 26 26 26 42 42 43
- 54 54 54 66 66 66 78 78 78 78 78 78
- 78 78 78 74 74 74 66 66 66 54 54 54
- 42 42 43 26 26 26 18 18 18 10 10 10
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 22 22 22 42 42 43 66 66 66 86 86 86
- 66 66 66 38 38 38 38 38 38 22 22 22
- 26 26 26 34 34 34 54 54 54 66 66 66
- 86 86 86 70 70 70 46 46 46 26 26 26
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 50 50 50 82 82 82 58 58 58 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 54 54 54 86 86 86 66 66 66
- 38 38 38 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 78 78 78 34 34 34 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 70 70 70
- 78 78 78 46 46 46 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 42 42 43 82 82 82
- 26 26 26 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 46 46 46 34 34 34 6 6 6 2 2 6
- 42 42 43 78 78 78 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 30 30 30 66 66 66 58 58 58
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 86 86 86 102 102 102 46 46 46 10 10 10
- 2 2 6 58 58 58 70 70 70 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 86 86 86 10 10 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 30 30 30
- 94 94 93 94 94 93 58 58 58 26 26 26
- 2 2 6 6 6 6 78 78 78 54 54 54
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 62 62 62 62 62 62 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 54 54 54 38 38 38 18 18 18 10 10 10
- 2 2 6 2 2 6 34 34 34 82 82 82
- 38 38 38 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 10 10 10 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 54 54 54
- 66 66 66 26 26 26 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 82 82 82 2 2 6 2 2 6
- 2 2 6 6 6 6 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 6 6 6
- 14 14 13 10 10 10 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 18 18 18
- 82 82 82 34 34 34 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 6 6 6 6 6 6 22 22 22 34 34 34
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 34 34 34
- 10 10 10 50 50 50 22 22 22 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 86 86 86 42 42 43 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 2 2 6
- 38 38 38 118 118 118 94 94 93 22 22 22
- 22 22 22 2 2 6 2 2 6 2 2 6
- 14 14 13 86 86 86 138 138 142 163 163 163
-154 154 154 38 38 38 26 26 26 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 14 14 13
-134 134 134 198 198 196 194 194 194 118 118 118
- 10 10 10 2 2 6 2 2 6 6 6 6
-102 98 90 186 186 186 210 210 210 218 218 218
-214 214 214 134 134 134 14 14 13 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 50 50 50 18 18 18 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 86 86 86 2 2 6 54 54 54
-218 218 218 194 194 194 226 226 226 246 246 246
- 58 58 58 2 2 6 2 2 6 30 30 30
-210 210 210 254 254 254 174 174 174 122 122 122
-223 222 222 234 234 234 74 74 74 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 46 46 46 82 82 82 2 2 6 106 106 105
-170 170 170 26 26 26 86 86 86 226 226 226
-122 122 122 10 10 10 14 14 13 46 46 46
-230 230 228 190 190 187 6 6 6 70 70 70
- 89 90 90 238 238 238 158 158 158 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 86 86 86 6 6 6 118 118 118
-106 106 105 6 6 6 70 70 70 150 150 150
-130 130 130 18 18 18 38 38 38 54 54 54
-223 222 222 106 106 105 2 2 6 14 14 13
- 46 46 46 190 190 187 198 198 196 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 94 94 93 14 14 13 102 102 102
-130 130 130 2 2 6 18 18 18 118 118 118
-122 100 66 122 94 10 122 94 10 104 78 10
-163 163 163 106 106 105 2 2 6 2 2 6
- 2 2 6 194 194 194 194 194 194 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 89 90 90 14 14 13 58 58 58
-210 210 210 26 26 26 60 40 9 154 114 10
-226 170 10 241 186 13 229 174 11 186 146 17
-214 174 14 178 147 70 38 26 10 2 2 6
- 70 70 70 246 246 246 138 138 142 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 66 66 66 26 26 26 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 14 14 13 10 10 10
-194 194 194 190 166 114 195 134 10 229 174 11
-238 182 14 234 190 10 234 196 18 238 202 21
-246 206 46 244 212 20 234 196 18 186 146 17
-218 194 134 206 206 194 42 42 43 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 74 74 74 30 30 30 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 86 86 86 14 14 13 2 2 6
-122 86 26 195 134 10 220 162 10 238 182 14
-241 186 13 234 196 18 244 212 20 246 217 53
-246 217 53 246 217 39 244 212 20 244 212 20
-244 212 20 224 188 14 122 86 26 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 82 82 82 34 34 34 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 82 82 82 30 30 30 60 40 9
-181 122 9 204 146 11 229 174 11 238 182 14
-234 190 10 238 202 21 244 212 20 246 218 74
-246 217 39 244 212 20 244 212 20 244 212 20
-224 188 14 214 174 14 186 146 17 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 26 26 26 94 94 93 42 42 43 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 50 50 50 105 70 7
-195 134 10 219 158 11 238 178 14 241 186 13
-234 196 18 244 212 20 246 217 53 241 214 34
-244 212 20 244 212 20 244 212 20 197 151 13
-204 146 11 219 158 11 158 118 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 89 90 90 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 46 46 46 22 22 22
-138 94 6 210 162 12 238 182 14 238 190 10
-238 202 21 244 212 20 244 212 20 244 212 20
-244 212 20 202 164 20 186 134 10 211 150 11
-219 158 11 211 150 11 104 78 10 2 2 6
- 6 6 6 54 54 54 14 14 13 2 2 6
- 2 2 6 62 62 62 74 74 74 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 34 34 34 78 78 78 50 50 50 6 6 6
- 92 69 26 138 102 14 190 146 14 224 188 14
-238 202 21 234 196 18 214 174 14 190 146 14
-170 122 12 195 134 10 211 150 11 214 154 10
-202 147 31 182 158 106 102 98 90 2 2 6
- 2 2 6 78 78 78 118 118 118 58 58 58
- 2 2 6 22 22 22 89 90 90 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 86 86 86 50 50 50 6 6 6
-130 130 130 173 154 115 158 106 9 170 122 12
-197 151 13 186 146 17 197 139 12 204 146 11
-204 146 11 204 146 11 197 139 12 190 166 114
-194 194 194 198 198 196 174 174 174 14 14 13
- 2 2 6 22 22 22 118 118 118 118 118 118
- 22 22 22 2 2 6 74 74 74 70 70 70
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 102 102 102 26 26 26 10 10 10
-138 138 142 190 190 187 173 154 115 158 106 9
-197 139 12 204 146 11 197 139 12 195 134 10
-181 122 9 188 140 34 191 178 145 186 186 186
-201 202 203 223 222 222 214 214 214 66 66 66
- 2 2 6 2 2 6 50 50 50 62 62 62
- 6 6 6 2 2 6 10 10 10 89 90 90
- 50 50 50 18 18 18 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 34 34 34
- 74 74 74 74 74 74 2 2 6 6 6 6
-146 146 146 198 198 196 190 190 187 178 166 146
-154 122 54 158 106 9 158 106 9 170 126 38
-173 154 115 186 186 186 190 190 187 210 210 210
-246 246 246 254 254 254 254 254 254 182 182 182
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 62 62 62
- 74 74 74 34 34 34 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 22 22 22 54 54 54
- 94 94 93 18 18 18 2 2 6 46 46 46
-234 234 234 223 222 222 190 190 187 190 190 187
-190 190 187 186 186 186 186 186 186 190 190 187
-190 190 187 194 194 194 214 214 214 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
- 82 82 82 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 13
- 86 86 86 54 54 54 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 46 46 46 89 90 90
- 46 46 46 18 18 18 6 6 6 182 182 182
-254 254 254 246 246 246 206 206 206 190 190 187
-190 190 187 190 190 187 190 190 187 190 190 187
-206 206 206 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-201 202 203 14 14 13 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 86 86 86 42 42 43 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 14 14 13 38 38 38 74 74 74 66 66 66
- 2 2 6 6 6 6 89 90 90 250 250 250
-254 254 254 254 254 254 238 238 238 198 198 196
-190 190 187 190 190 187 194 194 194 223 222 222
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 82 82 82 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 78 78 78 70 70 70 34 34 34
- 14 14 13 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 34 34 34 66 66 66 78 78 78 6 6 6
- 2 2 6 18 18 18 218 218 218 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-226 226 226 230 230 228 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 174 174 174 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 18 18 18 89 90 90 62 62 62
- 30 30 30 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 26 26 26
- 58 58 58 89 90 90 18 18 18 2 2 6
- 2 2 6 110 110 110 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 18 18 18 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 94 94 93
- 54 54 54 26 26 26 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 22 22 22 50 50 50
- 89 90 90 26 26 26 2 2 6 2 2 6
- 14 14 13 194 194 194 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 242 242 242 54 54 54 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 86 86 86 50 50 50 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 38 38 38 82 82 82
- 34 34 34 2 2 6 2 2 6 2 2 6
- 42 42 43 194 194 194 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 242 242 242 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 246 246 246 238 238 238
-226 226 226 230 230 228 102 102 102 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 38 38 38 82 82 82 42 42 43 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 62 62 62 66 66 66
- 2 2 6 2 2 6 2 2 6 6 6 6
- 70 70 70 170 170 170 206 206 206 234 234 234
-246 246 246 250 250 250 250 250 250 238 238 238
-226 226 226 230 230 228 238 238 238 250 250 250
-250 250 250 250 250 250 246 246 246 230 230 228
-214 214 214 206 206 206 201 202 203 201 202 203
-198 198 196 201 202 203 182 182 182 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 62 62 62 66 66 66 30 30 30
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 42 42 43 82 82 82 18 18 18
- 2 2 6 2 2 6 2 2 6 10 10 10
- 94 94 93 182 182 182 218 218 218 242 242 242
-250 250 250 254 254 254 254 254 254 250 250 250
-234 234 234 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-238 238 238 226 226 226 210 210 210 201 202 203
-194 194 194 194 194 194 210 210 210 158 158 158
- 6 6 6 14 14 13 50 50 50 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 86 86 86 46 46 46
- 18 18 18 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 70 70 70 2 2 6
- 2 2 6 10 10 10 2 2 6 22 22 22
-166 166 166 230 230 228 250 250 250 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-242 242 242 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 246 246
-230 230 228 206 206 206 198 198 196 226 226 226
- 94 94 93 2 2 6 6 6 6 38 38 38
- 30 30 30 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 62 62 62 66 66 66
- 26 26 26 10 10 10 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 74 74 74 50 50 50 2 2 6
- 26 26 26 26 26 26 2 2 6 106 106 105
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 218 218 218 201 202 203
-210 210 210 14 14 13 2 2 6 2 2 6
- 30 30 30 22 22 22 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 86 86 86
- 42 42 43 14 14 13 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 14 14 13
- 42 42 43 89 90 90 22 22 22 2 2 6
- 42 42 43 2 2 6 18 18 18 218 218 218
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 223 222 222
-218 218 218 102 102 102 2 2 6 14 14 13
- 18 18 18 38 38 38 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 58 58 58 22 22 22 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 82 82 82 2 2 6 26 26 26
- 22 22 22 2 2 6 122 122 122 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-238 238 238 198 198 196 6 6 6 38 38 38
- 58 58 58 26 26 26 38 38 38 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 78 78 78 30 30 30 10 10 10 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 10 10 10 30 30 30
- 74 74 74 58 58 58 2 2 6 42 42 43
- 2 2 6 22 22 22 230 230 228 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 246 246 246 46 46 46 38 38 38
- 42 42 43 14 14 13 38 38 38 14 14 13
- 2 2 6 2 2 6 2 2 6 6 6 6
- 86 86 86 46 46 46 14 14 13 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 42 42 43
- 89 90 90 18 18 18 18 18 18 26 26 26
- 2 2 6 118 118 118 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 250 250 250 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 94 94 93 6 6 6
- 2 2 6 2 2 6 10 10 10 34 34 34
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 58 58 58 22 22 22 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 26 26 26 66 66 66
- 82 82 82 2 2 6 38 38 38 6 6 6
- 14 14 13 210 210 210 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 246 246 246 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 146 146 146 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 43 74 74 74 30 30 30 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 14 14 13 42 42 43 89 90 90
- 26 26 26 6 6 6 42 42 43 2 2 6
- 74 74 74 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 242 242 242 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 182 182 182 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 10 10 10 86 86 86 38 38 38 10 10 10
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 10 10 10 26 26 26 66 66 66 82 82 82
- 2 2 6 22 22 22 18 18 18 2 2 6
-150 150 150 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 86 86 86 46 46 46 14 14 13
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 46 46 46 86 86 86 18 18 18
- 2 2 6 34 34 34 10 10 10 6 6 6
-210 210 210 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 223 222 222 6 6 6
- 2 2 6 2 2 6 6 6 6 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 26 26 26 66 66 66 62 62 62 2 2 6
- 2 2 6 38 38 38 10 10 10 26 26 26
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 238 238 238
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 6 6 6
- 2 2 6 2 2 6 10 10 10 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 38 38 38 78 78 78 6 6 6 2 2 6
- 2 2 6 46 46 46 14 14 13 42 42 43
-246 246 246 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 10 10 10
- 2 2 6 2 2 6 22 22 22 14 14 13
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 50 50 50 74 74 74 2 2 6 2 2 6
- 14 14 13 70 70 70 34 34 34 62 62 62
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 14 14 13
- 2 2 6 2 2 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 18 18 18
- 54 54 54 62 62 62 2 2 6 2 2 6
- 2 2 6 30 30 30 46 46 46 70 70 70
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 226 226 226 10 10 10
- 2 2 6 6 6 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 22 22 22
- 58 58 58 62 62 62 2 2 6 2 2 6
- 2 2 6 2 2 6 30 30 30 78 78 78
-250 250 250 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 206 206 206 2 2 6
- 22 22 22 34 34 34 18 14 6 22 22 22
- 26 26 26 18 18 18 6 6 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 26 26 26
- 62 62 62 106 106 105 74 51 11 186 134 10
-210 162 12 122 94 10 6 6 6 62 62 62
-238 238 238 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 246 246 246
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 158 158 158 18 18 18
- 14 14 13 2 2 6 2 2 6 2 2 6
- 6 6 6 18 18 18 66 66 66 38 38 38
- 6 6 6 94 94 93 50 50 50 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 10 10 10 10 10 10 18 18 18 38 38 38
- 78 78 78 142 134 106 219 158 11 241 186 13
-246 190 14 246 190 14 158 118 10 10 10 10
- 89 90 90 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 246 230 190
-238 206 90 238 206 90 188 140 34 38 26 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 38 38 38 46 46 46
- 26 26 26 106 106 105 54 54 54 18 18 18
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 6 6 6 14 14 13 22 22 22
- 30 30 30 38 38 38 50 50 50 70 70 70
-106 106 105 188 140 34 226 170 10 241 186 13
-246 190 14 246 190 14 246 190 14 154 114 10
- 6 6 6 74 74 74 226 226 226 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 230 230 228 250 250 250
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 233 188 64
-240 198 14 244 212 20 234 196 18 38 30 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 30 30 30 26 26 26
-202 164 20 154 142 90 66 66 66 26 26 26
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 18 18 18 38 38 38 58 58 58
- 78 78 78 86 86 86 102 102 102 122 122 122
-178 147 70 211 150 11 234 174 12 246 186 14
-246 190 14 246 190 14 246 190 14 238 190 10
-104 78 10 2 2 6 46 46 46 198 198 196
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 234 234 234 242 242 242
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 222 175 59
-241 186 13 240 198 14 210 162 12 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 122 94 10
-238 202 21 234 196 18 82 82 82 34 34 34
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 38 38 38 70 70 70 154 122 54
-188 140 34 204 146 11 197 139 12 197 139 12
-214 154 10 226 170 10 241 186 13 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-229 174 11 49 35 6 2 2 6 22 22 22
-158 158 158 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 250 250 250 242 242 242 222 175 59
-238 182 14 241 186 13 214 154 10 49 35 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 60 40 9 229 174 11
-238 190 10 241 186 13 114 102 78 42 42 43
- 14 14 13 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 22 22 22 54 54 54 154 122 54 214 154 10
-226 170 10 229 174 11 226 170 10 226 170 10
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-240 198 14 186 146 17 10 10 10 2 2 6
- 6 6 6 118 118 118 242 242 242 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 198 198 196 206 170 74
-238 178 14 238 178 14 211 150 11 138 94 6
- 18 14 6 2 2 6 2 2 6 2 2 6
- 6 6 6 70 46 6 204 146 11 238 178 14
-238 182 14 238 182 14 126 114 90 58 58 58
- 22 22 22 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 70 70 70 182 134 38 226 170 10
-238 182 14 241 186 13 241 186 13 246 186 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 234 196 18 98 70 6 2 2 6
- 2 2 6 2 2 6 66 66 66 223 222 222
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 206 206 206 198 198 196 207 165 68
-229 174 11 229 174 11 219 158 11 195 134 10
-163 110 10 118 82 10 104 78 10 118 82 10
-164 114 8 197 139 12 226 170 10 238 182 14
-241 186 13 241 186 13 162 146 94 78 78 78
- 34 34 34 14 14 13 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 30 30 30 78 78 78 188 140 34 226 170 10
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 240 198 14 202 164 20 18 18 18
- 2 2 6 2 2 6 2 2 6 38 38 38
-218 218 218 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 206 206 206 198 198 196 207 165 68
-226 170 10 238 178 14 226 166 13 211 150 11
-204 146 11 197 139 12 195 134 10 197 139 12
-211 150 11 226 170 10 241 186 13 246 190 14
-246 190 14 246 186 14 229 174 11 126 114 90
- 62 62 62 30 30 30 14 14 13 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 30 30 30 78 78 78 174 134 50 226 166 13
-238 182 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 138 102 14
- 2 2 6 2 2 6 2 2 6 2 2 6
- 78 78 78 250 250 250 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-250 250 250 214 214 214 198 198 196 192 148 44
-220 162 10 238 178 14 234 174 12 226 166 13
-219 158 11 214 154 10 214 154 10 219 158 11
-226 170 10 238 182 14 246 190 14 246 190 14
-246 190 14 246 190 14 241 186 13 206 160 36
-102 102 102 58 58 58 30 30 30 14 14 13
- 6 6 6 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 10 10 10 86 86 86 150 150 150
-170 170 170 186 186 186 226 210 207 231 220 218
-246 230 190 246 230 190 246 230 190 246 230 190
-238 206 90 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 240 198 14 224 188 14
- 60 40 9 2 2 6 6 6 6 2 2 6
- 22 22 22 238 238 238 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 226 226 226 186 186 186 182 134 38
-219 158 11 238 178 14 238 182 14 238 178 14
-229 174 11 226 170 10 226 170 10 229 174 11
-238 178 14 241 186 13 246 190 14 246 190 14
-246 190 14 240 198 14 246 230 190 246 230 190
-226 210 207 186 186 186 110 110 110 38 38 38
- 26 26 26 122 122 122 138 138 142 138 138 142
-138 138 142 102 98 90 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 14 14 13 154 154 154 246 246 246 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-246 230 190 238 206 90 240 198 14 240 198 14
-240 198 14 240 198 14 246 190 14 246 190 14
-246 190 14 240 198 14 240 198 14 238 202 21
-206 160 36 18 18 18 22 22 22 30 30 30
- 70 70 70 246 246 246 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 254 254 254 254 254 254 254 254 254
-254 254 254 230 230 228 118 118 118 170 126 38
-220 162 10 238 178 14 241 186 13 246 190 14
-234 196 18 246 190 14 246 190 14 234 196 18
-246 190 14 246 206 46 238 206 90 246 206 46
-240 198 14 246 230 190 254 254 254 254 254 254
-254 254 254 252 251 251 205 195 190 110 110 110
-134 134 134 242 242 242 250 250 250 254 254 254
-250 250 250 138 138 142 102 98 90 2 2 2
- 2 2 2 2 2 2 3 3 3 18 14 6
-150 150 150 242 242 242 239 159 153 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-249 100 93 249 100 93 249 100 93 249 100 93
-239 159 153 246 218 74 246 246 246 246 246 246
-246 246 246 246 246 246 238 206 90 246 190 14
-246 230 190 246 246 246 246 246 246 246 246 246
-246 230 190 138 102 14 182 182 182 242 242 242
-252 251 251 252 251 251 252 251 251 252 251 251
-252 251 251 252 251 251 254 254 254 252 251 251
-252 251 251 252 251 251 246 246 246 252 251 251
-254 254 254 252 251 251 252 251 251 254 254 254
-254 254 254 252 251 251 242 242 242 238 238 238
-238 206 90 238 178 14 241 186 13 246 230 190
-246 246 246 246 246 246 246 246 246 246 230 190
-246 230 190 246 246 246 252 251 251 246 230 190
-246 230 190 246 230 190 249 100 93 249 100 93
-249 100 93 249 100 93 218 194 134 218 194 134
-234 234 234 212 132 53 249 100 93 249 100 93
-249 100 93 239 159 153 138 138 142 102 98 90
- 2 2 2 2 2 2 10 10 10 150 150 150
-242 242 242 249 100 93 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 246 246 246 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 230 190 246 230 190 238 238 238 246 230 190
-246 230 190 246 230 190 246 230 190 246 246 246
-231 220 218 218 194 134 218 194 134 226 210 207
-246 246 246 246 246 246 246 246 246 252 251 251
-246 246 246 226 210 207 218 194 134 218 194 134
-239 159 153 218 194 134 226 210 207 246 230 190
-246 246 246 238 206 90 246 230 190 246 230 190
-246 230 190 246 230 190 246 230 190 246 230 190
-246 246 246 226 210 207 239 159 153 226 210 207
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 218 194 134 246 246 246
-231 220 218 254 21 21 254 3 3 254 3 3
-254 3 3 212 132 53 250 250 250 122 122 122
- 2 2 2 2 2 2 89 90 90 246 246 246
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-226 210 207 226 210 207 254 21 21 254 21 21
-254 21 21 254 21 21 239 159 153 252 251 251
-249 100 93 254 21 21 254 21 21 254 21 21
-249 100 93 246 246 246 249 100 93 254 21 21
-254 21 21 254 21 21 249 100 93 249 100 93
-254 21 21 254 3 3 254 3 3 254 21 21
-212 132 53 246 246 246 252 251 251 226 210 207
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 21 21
-249 100 93 242 242 242 246 246 246 249 100 93
-254 21 21 254 21 21 254 21 21 249 100 93
-249 100 93 254 3 3 254 3 3 254 56 56
-246 246 246 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 246 230 190 252 251 251
-239 159 153 254 3 3 254 3 3 254 3 3
-254 3 3 218 194 134 246 246 246 58 58 58
- 2 2 2 6 6 6 182 182 182 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 212 132 53 249 100 93 249 100 93
-246 246 246 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 238 238 238 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 246 230 190 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 246 246 246 231 220 218 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 254 56 56
-254 3 3 254 3 3 254 3 3 212 132 53
-246 246 246 254 21 21 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 242 242 242 214 214 214 14 14 13
- 2 2 2 6 6 6 210 210 210 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 239 159 153
-239 159 153 239 159 153 238 238 238 246 246 246
-246 246 246 254 56 56 254 3 3 254 3 3
-254 3 3 249 100 93 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 246 246 246 249 100 93 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-242 242 242 239 159 153 254 3 3 254 3 3
-254 3 3 249 100 93 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-226 210 207 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 21 21
-254 3 3 254 3 3 254 3 3 254 3 3
-249 100 93 254 254 254 158 158 158 2 2 2
- 2 2 2 10 10 10 186 186 186 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 252 251 251
-246 230 190 254 21 21 254 3 3 254 3 3
-254 3 3 239 159 153 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 56 56
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 226 210 207
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 231 220 218 254 21 21 254 3 3
-254 3 3 254 3 3 254 21 21 254 56 56
-254 56 56 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 249 100 93 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 252 251 251 89 90 90 2 2 2
- 2 2 2 6 6 6 50 50 50 206 206 206
-226 210 207 249 100 93 254 56 56 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 238 238 238
-239 159 153 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 238 238 238 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-238 238 238 254 56 56 254 3 3 254 3 3
-254 3 3 239 159 153 246 246 246 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-249 100 93 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 21 21 226 210 207 254 56 56 254 3 3
-254 3 3 254 3 3 254 21 21 249 100 93
-239 159 153 239 159 153 239 159 153 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-246 230 190 242 242 242 26 26 26 2 2 2
- 6 6 6 50 50 50 206 206 206 226 210 207
-231 220 218 231 220 218 231 220 218 246 230 190
-246 230 190 239 159 153 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 21 21 231 220 218 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-218 194 134 254 3 3 254 3 3 254 3 3
-254 3 3 239 159 153 246 230 190 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-239 159 153 212 132 53 254 3 3 254 3 3
-254 3 3 254 21 21 218 194 134 231 220 218
-231 220 218 231 220 218 226 210 207 218 194 134
-226 210 207 231 220 218 254 3 3 254 3 3
-254 3 3 254 3 3 212 132 53 246 246 246
-252 251 251 252 251 251 242 242 242 231 220 218
-254 21 21 254 3 3 254 3 3 254 3 3
-249 100 93 242 242 242 238 238 238 254 56 56
-254 3 3 254 3 3 254 3 3 254 56 56
-246 246 246 194 194 194 6 6 6 2 2 2
- 22 22 22 210 210 210 246 230 190 254 56 56
-254 21 21 254 21 21 254 21 21 254 21 21
-254 21 21 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 249 100 93 246 246 246
-254 56 56 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 56 56 242 242 242
-212 132 53 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 56 56
-238 238 238 212 132 53 254 3 3 254 3 3
-254 3 3 254 3 3 254 56 56 249 100 93
-249 100 93 249 100 93 254 56 56 254 56 56
-246 246 246 239 159 153 254 3 3 254 3 3
-254 3 3 254 21 21 231 220 218 246 246 246
-206 170 74 182 158 106 246 246 246 239 159 153
-254 3 3 254 3 3 254 3 3 254 3 3
-218 194 134 242 242 242 246 230 190 254 21 21
-254 3 3 254 3 3 254 3 3 212 132 53
-252 251 251 131 126 116 6 6 6 2 2 2
- 89 90 90 246 246 246 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 21 21 226 210 207 246 246 246
-249 100 93 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 56 56 226 210 207 252 251 251
-254 56 56 254 3 3 254 3 3 254 3 3
-254 56 56 254 21 21 254 3 3 254 3 3
-254 3 3 254 3 3 254 21 21 218 194 134
-238 238 238 226 210 207 254 21 21 254 3 3
-254 3 3 254 3 3 254 3 3 254 3 3
-254 3 3 254 3 3 254 3 3 239 159 153
-252 251 251 249 100 93 254 3 3 254 3 3
-254 3 3 254 56 56 246 246 246 231 220 218
-138 102 14 198 198 196 252 251 251 249 100 93
-254 3 3 254 3 3 254 3 3 254 21 21
-246 230 190 252 251 251 239 159 153 254 3 3
-254 3 3 254 3 3 254 3 3 218 194 134
-242 242 242 62 62 62 6 6 6 2 2 2
- 58 58 58 122 122 122 218 194 134 212 132 53
-249 100 93 249 100 93 254 56 56 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-212 132 53 246 230 190 214 214 214 146 146 146
-242 242 242 239 159 153 249 100 93 254 56 56
-254 56 56 254 56 56 254 56 56 249 100 93
-239 159 153 246 230 190 246 246 246 246 230 190
-254 21 21 254 3 3 254 3 3 254 3 3
-239 159 153 218 194 134 249 100 93 254 56 56
-254 56 56 249 100 93 226 210 207 230 230 228
- 89 90 90 231 220 218 226 210 207 249 100 93
-249 100 93 254 56 56 254 56 56 254 56 56
-249 100 93 249 100 93 239 159 153 238 238 238
-218 194 134 239 159 153 212 132 53 249 100 93
-249 100 93 239 159 153 231 220 218 154 142 90
-102 102 102 146 146 146 170 170 170 239 159 153
-249 100 93 249 100 93 249 100 93 239 159 153
-218 218 218 130 130 130 239 159 153 249 100 93
-249 100 93 249 100 93 212 132 53 246 230 190
-118 118 118 18 14 6 6 6 6 2 2 2
- 2 2 2 58 58 58 118 118 118 242 242 242
-254 254 254 250 250 250 246 246 246 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 214 214 214 50 50 50 18 18 18
-138 138 142 246 246 246 252 251 251 246 246 246
-246 246 246 246 246 246 246 246 246 252 251 251
-252 251 251 231 220 218 252 251 251 239 159 153
-254 3 3 254 3 3 254 3 3 254 21 21
-231 220 218 238 238 238 252 251 251 242 242 242
-252 251 251 252 251 251 230 230 228 74 74 74
- 18 18 18 62 62 62 226 226 226 254 254 254
-252 251 251 246 246 246 246 246 246 252 251 251
-252 251 251 252 251 251 250 250 250 150 150 150
-162 146 94 205 195 190 252 251 251 252 251 251
-252 251 251 226 210 207 142 134 106 86 86 86
- 58 58 58 34 34 34 122 122 122 163 163 163
-252 251 251 254 254 254 250 250 250 223 222 222
-102 98 90 78 78 78 130 130 130 254 254 254
-254 254 254 254 254 254 246 246 246 118 118 118
- 18 14 6 3 3 3 2 2 2 2 2 2
- 2 2 2 2 2 2 58 58 58 122 122 122
-150 150 150 170 170 170 182 182 182 190 190 187
-201 202 203 201 202 203 190 190 187 170 170 170
-118 118 118 30 30 30 6 6 6 6 6 6
- 10 10 10 86 86 86 150 150 150 182 182 182
-201 202 203 201 202 203 190 190 187 174 174 174
-134 134 134 146 146 146 190 190 187 239 159 153
-249 100 93 249 100 93 249 100 93 249 100 93
-234 234 234 138 138 142 166 166 166 198 198 196
-190 190 187 138 138 142 42 42 43 6 6 6
- 3 3 3 6 6 6 50 50 50 138 138 142
-174 174 174 198 198 196 198 198 196 182 182 182
-163 163 163 138 138 142 102 98 90 70 70 70
- 94 86 75 158 158 158 178 166 146 170 170 170
-174 174 174 138 138 142 74 74 74 50 50 50
- 26 26 26 14 14 13 10 10 10 118 118 118
-130 130 130 130 130 130 130 130 130 102 98 90
- 6 6 6 3 3 3 78 78 78 130 130 130
-130 130 130 130 130 130 118 118 118 18 14 6
- 3 3 3 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 6 6 6 6 6 6
- 10 10 10 10 10 10 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 6 6 6
- 14 14 13 14 14 13 22 22 22 22 22 22
- 34 34 34 42 42 43 122 122 122 174 174 174
-254 254 254 254 254 254 254 254 254 238 238 238
-138 138 142 6 6 6 6 6 6 10 10 10
- 6 6 6 2 2 2 2 2 2 6 6 6
- 6 6 6 6 6 6 6 6 6 2 2 2
- 6 6 6 10 10 10 10 10 10 6 6 6
- 2 2 2 6 6 6 14 14 13 30 30 30
- 42 42 43 54 54 54 62 62 62 62 62 62
- 54 54 54 42 42 43 30 30 30 18 18 18
- 10 10 10 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 2 2 2 6 6 6 2 2 2
- 2 2 2 2 2 2 2 2 2 10 10 10
- 10 10 10 10 10 10 14 14 13 106 106 105
-163 163 163 170 170 170 166 166 166 138 138 142
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 6 6 6 6 6 6 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 6 6 6
- 18 18 18 22 22 22 22 22 22 22 22 22
- 18 18 18 14 14 13 10 10 10 6 6 6
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
- 2 2 2 2 2 2 2 2 2 2 2 2
diff --git a/drivers/video/logo/logo_superh_vga16.ppm b/drivers/video/logo/logo_superh_vga16.ppm
deleted file mode 100644
index a8ffcd72951b53..00000000000000
--- a/drivers/video/logo/logo_superh_vga16.ppm
+++ /dev/null
@@ -1,1604 +0,0 @@
-P3
-# 16-color SuperH Linux logo
-80 80
-255
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 170 170 170 0 0 0 85 85 85
-170 170 170 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 170 170 170
- 85 85 85 85 85 85 85 85 85 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 170 170 170 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 255 170 170 170
-255 255 85 170 170 170 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 170 170 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 170 170 255 255 85
-170 85 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 85 85 85
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85
-170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 85 0 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-255 255 85 255 255 255 255 255 255 255 255 255
-255 255 85 255 255 255 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 170 0 0 255 85 85
-170 0 0 255 85 85 170 170 170 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 170 170 170
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 85 85 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 85 85 85
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 170 170
-170 170 170 255 85 85 255 85 85 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 255 255 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 170 0 0
-170 0 0 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 255
-170 170 170 255 85 85 255 85 85 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-170 170 170 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-170 170 170 170 0 0 170 0 0 170 0 0
-170 0 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 85 85 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 0 0 170 0 0
-170 0 0 170 0 0 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 85 85 255 85 85
-255 85 85 255 85 85 170 0 0 255 85 85
-255 255 255 170 170 170 170 0 0 170 0 0
-170 0 0 170 0 0 255 255 255 255 255 255
-255 85 85 170 170 170 255 255 255 170 170 170
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 255 255 170 0 0
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 170 170 170 0 0 0 0 0 0
- 85 85 85 255 255 255 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 255 85 85 170 170 170 255 255 255
-255 85 85 170 0 0 170 0 0 170 0 0
-255 85 85 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 170 170 170 255 85 85 170 0 0
-170 0 0 170 0 0 170 0 0 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 255 85 85 170 0 0 170 0 0
-170 0 0 255 85 85 255 255 255 170 170 170
-170 85 0 170 170 170 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 255 85 85
-255 255 255 255 255 255 170 170 170 170 0 0
-170 0 0 170 0 0 170 0 0 170 170 170
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 255 255 255 255 255 255 255 255
-170 0 0 170 0 0 170 0 0 170 0 0
-170 170 170 170 170 170 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
- 85 85 85 170 170 170 255 255 255 255 85 85
-255 85 85 255 85 85 255 85 85 255 85 85
-255 85 85 255 85 85 170 170 170 255 255 255
-170 170 170 255 85 85 170 170 170 255 85 85
-255 85 85 170 170 170 255 255 85 170 170 170
- 0 0 0 85 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 255 85 85 255 85 85
-255 255 255 255 85 85 170 170 170 255 85 85
-170 170 170 255 85 85 170 170 170 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 85 0 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 85 85
-170 0 0 170 0 0 170 0 0 170 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
-170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 85 85 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
- 85 85 85 85 85 85 170 170 170 170 170 170
-255 85 85 255 85 85 255 85 85 255 85 85
-255 255 255 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 170 85 0 0 0 0
- 0 0 0 85 85 85 85 85 85 170 170 170
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 93539aac0e5b2e..acfa591b604611 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on ARM || ((M68K || SUPERH || XTENSA) && !MMU)
+ depends on ARM || ((M68K || XTENSA) && !MMU)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index de2003974ff0d0..8bf3547f9aa2e2 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -19,7 +19,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 6c6859bfc454cf..c977e87caf67a0 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -64,7 +64,6 @@ enum cpuhp_state {
CPUHP_PERF_X86_PREPARE,
CPUHP_PERF_X86_AMD_UNCORE_PREP,
CPUHP_PERF_POWER,
- CPUHP_PERF_SUPERH,
CPUHP_X86_HPET_DEAD,
CPUHP_X86_APB_DEAD,
CPUHP_X86_MCE_DEAD,
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index c255273b02810e..f0fe4cf51b7e56 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -4,11 +4,7 @@
#include <linux/ioport.h>
-#ifdef CONFIG_SUPERH
-#define INTC_NR_IRQS 512
-#else
#define INTC_NR_IRQS 1024
-#endif
/*
* Convert back and forth between INTEVT and IRQ values.
diff --git a/init/Kconfig b/init/Kconfig
index 0958846b005e15..a5566d69cc9c94 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1535,7 +1535,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE
help
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 137d4abe3eda11..e1ce74fb991b25 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2362,8 +2362,7 @@ static struct ctl_table vm_table[] = {
.proc_handler = numa_zonelist_order_handler,
},
#endif
-#if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
- (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
+#if defined(CONFIG_X86_32) && !defined(CONFIG_UML)
{
.procname = "vdso_enabled",
#ifdef CONFIG_X86_32
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 881c3f84e88a32..c51d1f181913f3 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -514,7 +514,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
diff --git a/lib/math/div64.c b/lib/math/div64.c
index 55a81782e2717f..7c51cd1fc9d527 100644
--- a/lib/math/div64.c
+++ b/lib/math/div64.c
@@ -14,8 +14,8 @@
*
* Code generated for this function might be very inefficient
* for some CPUs. __div64_32() can be overridden by linking arch-specific
- * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S
- * or by defining a preprocessor macro in arch/include/asm/div64.h.
+ * assembly versions such as arch/ppc/lib/div64.S or by defining a preprocessor
+ * macro in arch/include/asm/div64.h.
*/
#include <linux/bitops.h>
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index 5ff04d8fe97163..b762c629b59545 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -26,8 +26,7 @@
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
- !defined(CONFIG_PPC32) && \
- !defined(CONFIG_SUPERH))
+ !defined(CONFIG_PPC32))
# define TEST_U64
#endif
diff --git a/scripts/coccinelle/misc/cond_no_effect.cocci b/scripts/coccinelle/misc/cond_no_effect.cocci
index 91d16a81d1da94..05564c2b86b0f3 100644
--- a/scripts/coccinelle/misc/cond_no_effect.cocci
+++ b/scripts/coccinelle/misc/cond_no_effect.cocci
@@ -14,18 +14,7 @@
// In the Linux kernel it does not seem to actually report
// false positives except for those that were documented as
// being intentional.
-// the two known cases are:
-// arch/sh/kernel/traps_64.c:read_opcode()
-// } else if ((pc & 1) == 0) {
-// /* SHcompact */
-// /* TODO : provide handling for this. We don't really support
-// user-mode SHcompact yet, and for a kernel fault, this would
-// have to come from a module built for SHcompact. */
-// return -EFAULT;
-// } else {
-// /* misaligned */
-// return -EFAULT;
-// }
+// the one known case is:
// fs/kernfs/file.c:kernfs_fop_open()
// * Both paths of the branch look the same. They're supposed to
// * look that way and give @of->mutex different static lockdep keys.
diff --git a/scripts/head-object-list.txt b/scripts/head-object-list.txt
index b074134cfac210..4b844a1e3be88e 100644
--- a/scripts/head-object-list.txt
+++ b/scripts/head-object-list.txt
@@ -39,7 +39,6 @@ arch/powerpc/kernel/fpu.o
arch/powerpc/kernel/vector.o
arch/powerpc/kernel/prom_init.o
arch/s390/kernel/head64.o
-arch/sh/kernel/head_32.o
arch/sparc/kernel/head_32.o
arch/sparc/kernel/head_64.o
arch/x86/kernel/head_32.o
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 7bddfd5e38d6cf..793a0326f32b46 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
menu "SoC Audio support for Renesas SoCs"
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
config SND_SOC_PCM_SH7760
tristate "SoC Audio support for Renesas SH7760"
@@ -23,7 +23,7 @@ config SND_SOC_SH4_SSI
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
- depends on SUPERH || COMMON_CLK
+ depends on COMMON_CLK
select SND_SIMPLE_CARD
help
This option enables FSI sound support
diff --git a/tools/include/asm/barrier.h b/tools/include/asm/barrier.h
index 8d378c57cb0114..ca1979459a127f 100644
--- a/tools/include/asm/barrier.h
+++ b/tools/include/asm/barrier.h
@@ -10,8 +10,6 @@
#include "../../arch/powerpc/include/asm/barrier.h"
#elif defined(__s390__)
#include "../../arch/s390/include/asm/barrier.h"
-#elif defined(__sh__)
-#include "../../arch/sh/include/asm/barrier.h"
#elif defined(__sparc__)
#include "../../arch/sparc/include/asm/barrier.h"
#elif defined(__tile__)
diff --git a/tools/perf/util/dwarf-regs.c b/tools/perf/util/dwarf-regs.c
index 3fa4486742cdfe..54fdbfb22ec274 100644
--- a/tools/perf/util/dwarf-regs.c
+++ b/tools/perf/util/dwarf-regs.c
@@ -19,7 +19,6 @@
#include "../arch/x86/include/dwarf-regs-table.h"
#include "../arch/arm/include/dwarf-regs-table.h"
#include "../arch/arm64/include/dwarf-regs-table.h"
-#include "../arch/sh/include/dwarf-regs-table.h"
#include "../arch/powerpc/include/dwarf-regs-table.h"
#include "../arch/s390/include/dwarf-regs-table.h"
#include "../arch/sparc/include/dwarf-regs-table.h"
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 04/22] sound: remove sound/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/Kconfig | 2 -
sound/Makefile | 2 +-
sound/sh/Kconfig | 32 --
sound/sh/Makefile | 11 -
sound/sh/aica.c | 628 ----------------------------------------
sound/sh/aica.h | 68 -----
sound/sh/sh_dac_audio.c | 412 --------------------------
7 files changed, 1 insertion(+), 1154 deletions(-)
delete mode 100644 sound/sh/Kconfig
delete mode 100644 sound/sh/Makefile
delete mode 100644 sound/sh/aica.c
delete mode 100644 sound/sh/aica.h
delete mode 100644 sound/sh/sh_dac_audio.c
diff --git a/sound/Kconfig b/sound/Kconfig
index e56d96d2b11cae..14361bb428baa1 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
source "sound/mips/Kconfig"
-source "sound/sh/Kconfig"
-
# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
diff --git a/sound/Makefile b/sound/Makefile
index 04ef04b1168f39..bb4b8806321c67 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_DMASOUND) += oss/dmasound/
-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
virtio/
obj-$(CONFIG_SND_AOA) += aoa/
diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
deleted file mode 100644
index b75fbb3236a7b9..00000000000000
--- a/sound/sh/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# ALSA SH drivers
-
-menuconfig SND_SUPERH
- bool "SUPERH sound devices"
- depends on SUPERH
- default y
- help
- Support for sound devices specific to SUPERH architectures.
- Drivers that are implemented on ASoC can be found in
- "ALSA for SoC audio support" section.
-
-if SND_SUPERH
-
-config SND_AICA
- tristate "Dreamcast Yamaha AICA sound"
- depends on SH_DREAMCAST
- select SND_PCM
- select G2_DMA
- help
- ALSA Sound driver for the SEGA Dreamcast console.
-
-config SND_SH_DAC_AUDIO
- tristate "SuperH DAC audio support"
- depends on SND
- depends on CPU_SH3 && HIGH_RES_TIMERS
- select SND_PCM
- help
- Say Y here to include support for the on-chip DAC.
-
-endif # SND_SUPERH
-
diff --git a/sound/sh/Makefile b/sound/sh/Makefile
deleted file mode 100644
index c0bbc500c17c73..00000000000000
--- a/sound/sh/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for ALSA
-#
-
-snd-aica-objs := aica.o
-snd-sh_dac_audio-objs := sh_dac_audio.o
-
-# Toplevel Module Dependency
-obj-$(CONFIG_SND_AICA) += snd-aica.o
-obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
deleted file mode 100644
index 6e9d6bd67369af..00000000000000
--- a/sound/sh/aica.c
+++ /dev/null
@@ -1,628 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
-*
-* Copyright Adrian McMenamin 2005, 2006, 2007
-* <adrian@mcmen.demon.co.uk>
-* Requires firmware (BSD licenced) available from:
-* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
-* or the maintainer
-*/
-
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/firmware.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
-#include <sound/core.h>
-#include <sound/control.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/info.h>
-#include <asm/dma.h>
-#include <mach/sysasic.h>
-#include "aica.h"
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("aica_firmware.bin");
-
-/* module parameters */
-#define CARD_NAME "AICA"
-static int index = -1;
-static char *id;
-static bool enable = 1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
-module_param(enable, bool, 0644);
-MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-
-/* Simple platform device */
-static struct platform_device *pd;
-static struct resource aica_memory_space[2] = {
- {
- .name = "AICA ARM CONTROL",
- .start = ARM_RESET_REGISTER,
- .flags = IORESOURCE_MEM,
- .end = ARM_RESET_REGISTER + 3,
- },
- {
- .name = "AICA Sound RAM",
- .start = SPU_MEMORY_BASE,
- .flags = IORESOURCE_MEM,
- .end = SPU_MEMORY_BASE + 0x200000 - 1,
- },
-};
-
-/* SPU specific functions */
-/* spu_write_wait - wait for G2-SH FIFO to clear */
-static void spu_write_wait(void)
-{
- int time_count;
- time_count = 0;
- while (1) {
- if (!(readl(G2_FIFO) & 0x11))
- break;
- /* To ensure hardware failure doesn't wedge kernel */
- time_count++;
- if (time_count > 0x10000) {
- snd_printk
- ("WARNING: G2 FIFO appears to be blocked.\n");
- break;
- }
- }
-}
-
-/* spu_memset - write to memory in SPU address space */
-static void spu_memset(u32 toi, u32 what, int length)
-{
- int i;
- unsigned long flags;
- if (snd_BUG_ON(length % 4))
- return;
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- local_irq_save(flags);
- writel(what, toi + SPU_MEMORY_BASE);
- local_irq_restore(flags);
- toi++;
- }
-}
-
-/* spu_memload - write to SPU address space */
-static void spu_memload(u32 toi, const void *from, int length)
-{
- unsigned long flags;
- const u32 *froml = from;
- u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
- int i;
- u32 val;
- length = DIV_ROUND_UP(length, 4);
- spu_write_wait();
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- val = *froml;
- local_irq_save(flags);
- writel(val, to);
- local_irq_restore(flags);
- froml++;
- to++;
- }
-}
-
-/* spu_disable - set spu registers to stop sound output */
-static void spu_disable(void)
-{
- int i;
- unsigned long flags;
- u32 regval;
- spu_write_wait();
- regval = readl(ARM_RESET_REGISTER);
- regval |= 1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
- for (i = 0; i < 64; i++) {
- spu_write_wait();
- regval = readl(SPU_REGISTER_BASE + (i * 0x80));
- regval = (regval & ~0x4000) | 0x8000;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, SPU_REGISTER_BASE + (i * 0x80));
- local_irq_restore(flags);
- }
-}
-
-/* spu_enable - set spu registers to enable sound output */
-static void spu_enable(void)
-{
- unsigned long flags;
- u32 regval = readl(ARM_RESET_REGISTER);
- regval &= ~1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
-}
-
-/*
- * Halt the sound processor, clear the memory,
- * load some default ARM7 code, and then restart ARM7
-*/
-static void spu_reset(void)
-{
- unsigned long flags;
- spu_disable();
- spu_memset(0, 0, 0x200000 / 4);
- /* Put ARM7 in endless loop */
- local_irq_save(flags);
- __raw_writel(0xea000002, SPU_MEMORY_BASE);
- local_irq_restore(flags);
- spu_enable();
-}
-
-/* aica_chn_start - write to spu to start playback */
-static void aica_chn_start(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* aica_chn_halt - write to spu to halt playback */
-static void aica_chn_halt(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* ALSA code below */
-static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
- .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
- .formats =
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_IMA_ADPCM),
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 1,
- .channels_max = 2,
- .buffer_bytes_max = AICA_BUFFER_SIZE,
- .period_bytes_min = AICA_PERIOD_SIZE,
- .period_bytes_max = AICA_PERIOD_SIZE,
- .periods_min = AICA_PERIOD_NUMBER,
- .periods_max = AICA_PERIOD_NUMBER,
-};
-
-static int aica_dma_transfer(int channels, int buffer_size,
- struct snd_pcm_substream *substream)
-{
- int q, err, period_offset;
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- unsigned long flags;
- err = 0;
- dreamcastcard = substream->pcm->private_data;
- period_offset = dreamcastcard->clicks;
- period_offset %= (AICA_PERIOD_NUMBER / channels);
- runtime = substream->runtime;
- for (q = 0; q < channels; q++) {
- local_irq_save(flags);
- err = dma_xfer(AICA_DMA_CHANNEL,
- (unsigned long) (runtime->dma_area +
- (AICA_BUFFER_SIZE * q) /
- channels +
- AICA_PERIOD_SIZE *
- period_offset),
- AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
- AICA_PERIOD_SIZE * period_offset,
- buffer_size / channels, AICA_DMA_MODE);
- if (unlikely(err < 0)) {
- local_irq_restore(flags);
- break;
- }
- dma_wait_for_completion(AICA_DMA_CHANNEL);
- local_irq_restore(flags);
- }
- return err;
-}
-
-static void startup_aica(struct snd_card_aica *dreamcastcard)
-{
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- aica_chn_start();
-}
-
-static void run_spu_dma(struct work_struct *work)
-{
- int buffer_size;
- struct snd_pcm_runtime *runtime;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard =
- container_of(work, struct snd_card_aica, spu_dma_work);
- runtime = dreamcastcard->substream->runtime;
- if (unlikely(dreamcastcard->dma_check == 0)) {
- buffer_size =
- frames_to_bytes(runtime, runtime->buffer_size);
- if (runtime->channels > 1)
- dreamcastcard->channel->flags |= 0x01;
- aica_dma_transfer(runtime->channels, buffer_size,
- dreamcastcard->substream);
- startup_aica(dreamcastcard);
- dreamcastcard->clicks =
- buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
- return;
- } else {
- aica_dma_transfer(runtime->channels,
- AICA_PERIOD_SIZE * runtime->channels,
- dreamcastcard->substream);
- snd_pcm_period_elapsed(dreamcastcard->substream);
- dreamcastcard->clicks++;
- if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
- dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
- mod_timer(&dreamcastcard->timer, jiffies + 1);
- }
-}
-
-static void aica_period_elapsed(struct timer_list *t)
-{
- struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
- t, timer);
- struct snd_pcm_substream *substream = dreamcastcard->substream;
- /*timer function - so cannot sleep */
- int play_period;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /* Have we played out an additional period? */
- play_period =
- frames_to_bytes(runtime,
- readl
- (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
- AICA_PERIOD_SIZE;
- if (play_period == dreamcastcard->current_period) {
- /* reschedule the timer */
- mod_timer(&(dreamcastcard->timer), jiffies + 1);
- return;
- }
- if (runtime->channels > 1)
- dreamcastcard->current_period = play_period;
- if (unlikely(dreamcastcard->dma_check == 0))
- dreamcastcard->dma_check = 1;
- schedule_work(&(dreamcastcard->spu_dma_work));
-}
-
-static void spu_begin_dma(struct snd_pcm_substream *substream)
-{
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /*get the queue to do the work */
- schedule_work(&(dreamcastcard->spu_dma_work));
- mod_timer(&dreamcastcard->timer, jiffies + 4);
-}
-
-static int snd_aicapcm_pcm_open(struct snd_pcm_substream
- *substream)
-{
- struct snd_pcm_runtime *runtime;
- struct aica_channel *channel;
- struct snd_card_aica *dreamcastcard;
- if (!enable)
- return -ENOENT;
- dreamcastcard = substream->pcm->private_data;
- channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
- if (!channel)
- return -ENOMEM;
- /* set defaults for channel */
- channel->sfmt = SM_8BIT;
- channel->cmd = AICA_CMD_START;
- channel->vol = dreamcastcard->master_volume;
- channel->pan = 0x80;
- channel->pos = 0;
- channel->flags = 0; /* default to mono */
- dreamcastcard->channel = channel;
- runtime = substream->runtime;
- runtime->hw = snd_pcm_aica_playback_hw;
- spu_enable();
- dreamcastcard->clicks = 0;
- dreamcastcard->current_period = 0;
- dreamcastcard->dma_check = 0;
- return 0;
-}
-
-static int snd_aicapcm_pcm_close(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- flush_work(&(dreamcastcard->spu_dma_work));
- del_timer(&dreamcastcard->timer);
- dreamcastcard->substream = NULL;
- kfree(dreamcastcard->channel);
- spu_disable();
- return 0;
-}
-
-static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
- dreamcastcard->channel->sfmt = SM_16BIT;
- dreamcastcard->channel->freq = substream->runtime->rate;
- dreamcastcard->substream = substream;
- return 0;
-}
-
-static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
- *substream, int cmd)
-{
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- spu_begin_dma(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- aica_chn_halt();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
- *substream)
-{
- return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
-}
-
-static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
- .open = snd_aicapcm_pcm_open,
- .close = snd_aicapcm_pcm_close,
- .prepare = snd_aicapcm_pcm_prepare,
- .trigger = snd_aicapcm_pcm_trigger,
- .pointer = snd_aicapcm_pcm_pointer,
-};
-
-/* TO DO: set up to handle more than one pcm instance */
-static int __init snd_aicapcmchip(struct snd_card_aica
- *dreamcastcard, int pcm_index)
-{
- struct snd_pcm *pcm;
- int err;
- /* AICA has no capture ability */
- err =
- snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
- &pcm);
- if (unlikely(err < 0))
- return err;
- pcm->private_data = dreamcastcard;
- strcpy(pcm->name, "AICA PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
- &snd_aicapcm_playback_ops);
- /* Allocate the DMA buffers */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- AICA_BUFFER_SIZE,
- AICA_BUFFER_SIZE);
- return 0;
-}
-
-/* Mixer controls */
-#define aica_pcmswitch_info snd_ctl_boolean_mono_info
-
-static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
- return 0;
-}
-
-static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- if (ucontrol->value.integer.value[0] == 1)
- return 0; /* TO DO: Fix me */
- else
- aica_chn_halt();
- return 0;
-}
-
-static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 0xFF;
- return 0;
-}
-
-static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY; /* we've not yet been set up */
- ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
- return 0;
-}
-
-static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- unsigned int vol;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY;
- vol = ucontrol->value.integer.value[0];
- if (vol > 0xff)
- return -EINVAL;
- if (unlikely(dreamcastcard->channel->vol == vol))
- return 0;
- dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
- dreamcastcard->master_volume = ucontrol->value.integer.value[0];
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- return 1;
-}
-
-static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Switch",
- .index = 0,
- .info = aica_pcmswitch_info,
- .get = aica_pcmswitch_get,
- .put = aica_pcmswitch_put
-};
-
-static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = aica_pcmvolume_info,
- .get = aica_pcmvolume_get,
- .put = aica_pcmvolume_put
-};
-
-static int load_aica_firmware(void)
-{
- int err;
- const struct firmware *fw_entry;
- spu_reset();
- err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
- if (unlikely(err))
- return err;
- /* write firmware into memory */
- spu_disable();
- spu_memload(0, fw_entry->data, fw_entry->size);
- spu_enable();
- release_firmware(fw_entry);
- return err;
-}
-
-static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
-{
- int err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- return 0;
-}
-
-static int snd_aica_remove(struct platform_device *devptr)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = platform_get_drvdata(devptr);
- if (unlikely(!dreamcastcard))
- return -ENODEV;
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return 0;
-}
-
-static int snd_aica_probe(struct platform_device *devptr)
-{
- int err;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
- if (unlikely(!dreamcastcard))
- return -ENOMEM;
- err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
- THIS_MODULE, 0, &dreamcastcard->card);
- if (unlikely(err < 0)) {
- kfree(dreamcastcard);
- return err;
- }
- strcpy(dreamcastcard->card->driver, "snd_aica");
- strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
- strcpy(dreamcastcard->card->longname,
- "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
- /* Prepare to use the queue */
- INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
- timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
- /* Load the PCM 'chip' */
- err = snd_aicapcmchip(dreamcastcard, 0);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Add basic controls */
- err = add_aicamixer_controls(dreamcastcard);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Register the card with ALSA subsystem */
- err = snd_card_register(dreamcastcard->card);
- if (unlikely(err < 0))
- goto freedreamcast;
- platform_set_drvdata(devptr, dreamcastcard);
- snd_printk
- ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
- return 0;
- freedreamcast:
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return err;
-}
-
-static struct platform_driver snd_aica_driver = {
- .probe = snd_aica_probe,
- .remove = snd_aica_remove,
- .driver = {
- .name = SND_AICA_DRIVER,
- },
-};
-
-static int __init aica_init(void)
-{
- int err;
- err = platform_driver_register(&snd_aica_driver);
- if (unlikely(err < 0))
- return err;
- pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
- aica_memory_space, 2);
- if (IS_ERR(pd)) {
- platform_driver_unregister(&snd_aica_driver);
- return PTR_ERR(pd);
- }
- /* Load the firmware */
- return load_aica_firmware();
-}
-
-static void __exit aica_exit(void)
-{
- platform_device_unregister(pd);
- platform_driver_unregister(&snd_aica_driver);
- /* Kill any sound still playing and reset ARM7 to safe state */
- spu_reset();
-}
-
-module_init(aica_init);
-module_exit(aica_exit);
diff --git a/sound/sh/aica.h b/sound/sh/aica.h
deleted file mode 100644
index 021b132e088e82..00000000000000
--- a/sound/sh/aica.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* aica.h
- * Header file for ALSA driver for
- * Sega Dreamcast Yamaha AICA sound
- * Copyright Adrian McMenamin
- * <adrian@mcmen.demon.co.uk>
- * 2006
- */
-
-/* SPU memory and register constants etc */
-#define G2_FIFO 0xa05f688c
-#define SPU_MEMORY_BASE 0xA0800000
-#define ARM_RESET_REGISTER 0xA0702C00
-#define SPU_REGISTER_BASE 0xA0700000
-
-/* AICA channels stuff */
-#define AICA_CONTROL_POINT 0xA0810000
-#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
-#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
-
-/* Command values */
-#define AICA_CMD_KICK 0x80000000
-#define AICA_CMD_NONE 0
-#define AICA_CMD_START 1
-#define AICA_CMD_STOP 2
-#define AICA_CMD_VOL 3
-
-/* Sound modes */
-#define SM_8BIT 1
-#define SM_16BIT 0
-#define SM_ADPCM 2
-
-/* Buffer and period size */
-#define AICA_BUFFER_SIZE 0x8000
-#define AICA_PERIOD_SIZE 0x800
-#define AICA_PERIOD_NUMBER 16
-
-#define AICA_CHANNEL0_OFFSET 0x11000
-#define AICA_CHANNEL1_OFFSET 0x21000
-#define CHANNEL_OFFSET 0x10000
-
-#define AICA_DMA_CHANNEL 5
-#define AICA_DMA_MODE 5
-
-#define SND_AICA_DRIVER "AICA"
-
-struct aica_channel {
- uint32_t cmd; /* Command ID */
- uint32_t pos; /* Sample position */
- uint32_t length; /* Sample length */
- uint32_t freq; /* Frequency */
- uint32_t vol; /* Volume 0-255 */
- uint32_t pan; /* Pan 0-255 */
- uint32_t sfmt; /* Sound format */
- uint32_t flags; /* Bit flags */
-};
-
-struct snd_card_aica {
- struct work_struct spu_dma_work;
- struct snd_card *card;
- struct aica_channel *channel;
- struct snd_pcm_substream *substream;
- int clicks;
- int current_period;
- struct timer_list timer;
- int master_volume;
- int dma_check;
-};
diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
deleted file mode 100644
index 8ebd972846acb5..00000000000000
--- a/sound/sh/sh_dac_audio.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * sh_dac_audio.c - SuperH DAC audio driver for ALSA
- *
- * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
- *
- * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
- */
-
-#include <linux/hrtimer.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/clock.h>
-#include <asm/hd64461.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
-MODULE_DESCRIPTION("SuperH DAC audio driver");
-MODULE_LICENSE("GPL");
-
-/* Module Parameters */
-static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
-
-/* main struct */
-struct snd_sh_dac {
- struct snd_card *card;
- struct snd_pcm_substream *substream;
- struct hrtimer hrtimer;
- ktime_t wakeups_per_second;
-
- int rate;
- int empty;
- char *data_buffer, *buffer_begin, *buffer_end;
- int processed; /* bytes proccesed, to compare with period_size */
- int buffer_size;
- struct dac_audio_pdata *pdata;
-};
-
-
-static void dac_audio_start_timer(struct snd_sh_dac *chip)
-{
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-}
-
-static void dac_audio_stop_timer(struct snd_sh_dac *chip)
-{
- hrtimer_cancel(&chip->hrtimer);
-}
-
-static void dac_audio_reset(struct snd_sh_dac *chip)
-{
- dac_audio_stop_timer(chip);
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-}
-
-static void dac_audio_set_rate(struct snd_sh_dac *chip)
-{
- chip->wakeups_per_second = 1000000000 / chip->rate;
-}
-
-
-/* PCM INTERFACE */
-
-static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_HALF_DUPLEX),
- .formats = SNDRV_PCM_FMTBIT_U8,
- .rates = SNDRV_PCM_RATE_8000,
- .rate_min = 8000,
- .rate_max = 8000,
- .channels_min = 1,
- .channels_max = 1,
- .buffer_bytes_max = (48*1024),
- .period_bytes_min = 1,
- .period_bytes_max = (48*1024),
- .periods_min = 1,
- .periods_max = 1024,
-};
-
-static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- runtime->hw = snd_sh_dac_pcm_hw;
-
- chip->substream = substream;
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-
- chip->pdata->start(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- chip->substream = NULL;
-
- dac_audio_stop_timer(chip);
- chip->pdata->stop(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
-
- chip->buffer_size = runtime->buffer_size;
- memset(chip->data_buffer, 0, chip->pdata->buffer_size);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- dac_audio_start_timer(chip);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
- dac_audio_stop_timer(chip);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void __user *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- if (copy_from_user_toio(chip->data_buffer + pos, src, count))
- return -EFAULT;
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memcpy_toio(chip->data_buffer + pos, src, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memset_io(chip->data_buffer + pos, 0, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static
-snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- int pointer = chip->buffer_begin - chip->data_buffer;
-
- return pointer;
-}
-
-/* pcm ops */
-static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
- .open = snd_sh_dac_pcm_open,
- .close = snd_sh_dac_pcm_close,
- .prepare = snd_sh_dac_pcm_prepare,
- .trigger = snd_sh_dac_pcm_trigger,
- .pointer = snd_sh_dac_pcm_pointer,
- .copy_user = snd_sh_dac_pcm_copy,
- .copy_kernel = snd_sh_dac_pcm_copy_kernel,
- .fill_silence = snd_sh_dac_pcm_silence,
- .mmap = snd_pcm_lib_mmap_iomem,
-};
-
-static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
-{
- int err;
- struct snd_pcm *pcm;
-
- /* device should be always 0 for us */
- err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
- if (err < 0)
- return err;
-
- pcm->private_data = chip;
- strcpy(pcm->name, "SH_DAC PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
-
- /* buffer size=48K */
- snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- NULL, 48 * 1024, 48 * 1024);
-
- return 0;
-}
-/* END OF PCM INTERFACE */
-
-
-/* driver .remove -- destructor */
-static int snd_sh_dac_remove(struct platform_device *devptr)
-{
- snd_card_free(platform_get_drvdata(devptr));
- return 0;
-}
-
-/* free -- it has been defined by create */
-static int snd_sh_dac_free(struct snd_sh_dac *chip)
-{
- /* release the data */
- kfree(chip->data_buffer);
- kfree(chip);
-
- return 0;
-}
-
-static int snd_sh_dac_dev_free(struct snd_device *device)
-{
- struct snd_sh_dac *chip = device->device_data;
-
- return snd_sh_dac_free(chip);
-}
-
-static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
-{
- struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
- hrtimer);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
- ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
-
- if (!chip->empty) {
- sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
- chip->buffer_begin++;
-
- chip->processed++;
- if (chip->processed >= b_ps) {
- chip->processed -= b_ps;
- snd_pcm_period_elapsed(chip->substream);
- }
-
- if (chip->buffer_begin == (chip->data_buffer +
- chip->buffer_size - 1))
- chip->buffer_begin = chip->data_buffer;
-
- if (chip->buffer_begin == chip->buffer_end)
- chip->empty = 1;
-
- }
-
- if (!chip->empty)
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-
- return HRTIMER_NORESTART;
-}
-
-/* create -- chip-specific constructor for the cards components */
-static int snd_sh_dac_create(struct snd_card *card,
- struct platform_device *devptr,
- struct snd_sh_dac **rchip)
-{
- struct snd_sh_dac *chip;
- int err;
-
- static const struct snd_device_ops ops = {
- .dev_free = snd_sh_dac_dev_free,
- };
-
- *rchip = NULL;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
-
- chip->card = card;
-
- hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- chip->hrtimer.function = sh_dac_audio_timer;
-
- dac_audio_reset(chip);
- chip->rate = 8000;
- dac_audio_set_rate(chip);
-
- chip->pdata = devptr->dev.platform_data;
-
- chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
- if (chip->data_buffer == NULL) {
- kfree(chip);
- return -ENOMEM;
- }
-
- err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
- if (err < 0) {
- snd_sh_dac_free(chip);
- return err;
- }
-
- *rchip = chip;
-
- return 0;
-}
-
-/* driver .probe -- constructor */
-static int snd_sh_dac_probe(struct platform_device *devptr)
-{
- struct snd_sh_dac *chip;
- struct snd_card *card;
- int err;
-
- err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot allocate the card\n");
- return err;
- }
-
- err = snd_sh_dac_create(card, devptr, &chip);
- if (err < 0)
- goto probe_error;
-
- err = snd_sh_dac_pcm(chip, 0);
- if (err < 0)
- goto probe_error;
-
- strcpy(card->driver, "snd_sh_dac");
- strcpy(card->shortname, "SuperH DAC audio driver");
- printk(KERN_INFO "%s %s", card->longname, card->shortname);
-
- err = snd_card_register(card);
- if (err < 0)
- goto probe_error;
-
- snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
-
- platform_set_drvdata(devptr, card);
- return 0;
-
-probe_error:
- snd_card_free(card);
- return err;
-}
-
-/*
- * "driver" definition
- */
-static struct platform_driver sh_dac_driver = {
- .probe = snd_sh_dac_probe,
- .remove = snd_sh_dac_remove,
- .driver = {
- .name = "dac_audio",
- },
-};
-
-module_platform_driver(sh_dac_driver);
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 04/22] sound: remove sound/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/Kconfig | 2 -
sound/Makefile | 2 +-
sound/sh/Kconfig | 32 --
sound/sh/Makefile | 11 -
sound/sh/aica.c | 628 ----------------------------------------
sound/sh/aica.h | 68 -----
sound/sh/sh_dac_audio.c | 412 --------------------------
7 files changed, 1 insertion(+), 1154 deletions(-)
delete mode 100644 sound/sh/Kconfig
delete mode 100644 sound/sh/Makefile
delete mode 100644 sound/sh/aica.c
delete mode 100644 sound/sh/aica.h
delete mode 100644 sound/sh/sh_dac_audio.c
diff --git a/sound/Kconfig b/sound/Kconfig
index e56d96d2b11cae..14361bb428baa1 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
source "sound/mips/Kconfig"
-source "sound/sh/Kconfig"
-
# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
diff --git a/sound/Makefile b/sound/Makefile
index 04ef04b1168f39..bb4b8806321c67 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_DMASOUND) += oss/dmasound/
-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
virtio/
obj-$(CONFIG_SND_AOA) += aoa/
diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
deleted file mode 100644
index b75fbb3236a7b9..00000000000000
--- a/sound/sh/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# ALSA SH drivers
-
-menuconfig SND_SUPERH
- bool "SUPERH sound devices"
- depends on SUPERH
- default y
- help
- Support for sound devices specific to SUPERH architectures.
- Drivers that are implemented on ASoC can be found in
- "ALSA for SoC audio support" section.
-
-if SND_SUPERH
-
-config SND_AICA
- tristate "Dreamcast Yamaha AICA sound"
- depends on SH_DREAMCAST
- select SND_PCM
- select G2_DMA
- help
- ALSA Sound driver for the SEGA Dreamcast console.
-
-config SND_SH_DAC_AUDIO
- tristate "SuperH DAC audio support"
- depends on SND
- depends on CPU_SH3 && HIGH_RES_TIMERS
- select SND_PCM
- help
- Say Y here to include support for the on-chip DAC.
-
-endif # SND_SUPERH
-
diff --git a/sound/sh/Makefile b/sound/sh/Makefile
deleted file mode 100644
index c0bbc500c17c73..00000000000000
--- a/sound/sh/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for ALSA
-#
-
-snd-aica-objs := aica.o
-snd-sh_dac_audio-objs := sh_dac_audio.o
-
-# Toplevel Module Dependency
-obj-$(CONFIG_SND_AICA) += snd-aica.o
-obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
deleted file mode 100644
index 6e9d6bd67369af..00000000000000
--- a/sound/sh/aica.c
+++ /dev/null
@@ -1,628 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
-*
-* Copyright Adrian McMenamin 2005, 2006, 2007
-* <adrian@mcmen.demon.co.uk>
-* Requires firmware (BSD licenced) available from:
-* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
-* or the maintainer
-*/
-
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/firmware.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
-#include <sound/core.h>
-#include <sound/control.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/info.h>
-#include <asm/dma.h>
-#include <mach/sysasic.h>
-#include "aica.h"
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("aica_firmware.bin");
-
-/* module parameters */
-#define CARD_NAME "AICA"
-static int index = -1;
-static char *id;
-static bool enable = 1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
-module_param(enable, bool, 0644);
-MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-
-/* Simple platform device */
-static struct platform_device *pd;
-static struct resource aica_memory_space[2] = {
- {
- .name = "AICA ARM CONTROL",
- .start = ARM_RESET_REGISTER,
- .flags = IORESOURCE_MEM,
- .end = ARM_RESET_REGISTER + 3,
- },
- {
- .name = "AICA Sound RAM",
- .start = SPU_MEMORY_BASE,
- .flags = IORESOURCE_MEM,
- .end = SPU_MEMORY_BASE + 0x200000 - 1,
- },
-};
-
-/* SPU specific functions */
-/* spu_write_wait - wait for G2-SH FIFO to clear */
-static void spu_write_wait(void)
-{
- int time_count;
- time_count = 0;
- while (1) {
- if (!(readl(G2_FIFO) & 0x11))
- break;
- /* To ensure hardware failure doesn't wedge kernel */
- time_count++;
- if (time_count > 0x10000) {
- snd_printk
- ("WARNING: G2 FIFO appears to be blocked.\n");
- break;
- }
- }
-}
-
-/* spu_memset - write to memory in SPU address space */
-static void spu_memset(u32 toi, u32 what, int length)
-{
- int i;
- unsigned long flags;
- if (snd_BUG_ON(length % 4))
- return;
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- local_irq_save(flags);
- writel(what, toi + SPU_MEMORY_BASE);
- local_irq_restore(flags);
- toi++;
- }
-}
-
-/* spu_memload - write to SPU address space */
-static void spu_memload(u32 toi, const void *from, int length)
-{
- unsigned long flags;
- const u32 *froml = from;
- u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
- int i;
- u32 val;
- length = DIV_ROUND_UP(length, 4);
- spu_write_wait();
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- val = *froml;
- local_irq_save(flags);
- writel(val, to);
- local_irq_restore(flags);
- froml++;
- to++;
- }
-}
-
-/* spu_disable - set spu registers to stop sound output */
-static void spu_disable(void)
-{
- int i;
- unsigned long flags;
- u32 regval;
- spu_write_wait();
- regval = readl(ARM_RESET_REGISTER);
- regval |= 1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
- for (i = 0; i < 64; i++) {
- spu_write_wait();
- regval = readl(SPU_REGISTER_BASE + (i * 0x80));
- regval = (regval & ~0x4000) | 0x8000;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, SPU_REGISTER_BASE + (i * 0x80));
- local_irq_restore(flags);
- }
-}
-
-/* spu_enable - set spu registers to enable sound output */
-static void spu_enable(void)
-{
- unsigned long flags;
- u32 regval = readl(ARM_RESET_REGISTER);
- regval &= ~1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
-}
-
-/*
- * Halt the sound processor, clear the memory,
- * load some default ARM7 code, and then restart ARM7
-*/
-static void spu_reset(void)
-{
- unsigned long flags;
- spu_disable();
- spu_memset(0, 0, 0x200000 / 4);
- /* Put ARM7 in endless loop */
- local_irq_save(flags);
- __raw_writel(0xea000002, SPU_MEMORY_BASE);
- local_irq_restore(flags);
- spu_enable();
-}
-
-/* aica_chn_start - write to spu to start playback */
-static void aica_chn_start(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* aica_chn_halt - write to spu to halt playback */
-static void aica_chn_halt(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* ALSA code below */
-static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
- .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
- .formats =
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_IMA_ADPCM),
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 1,
- .channels_max = 2,
- .buffer_bytes_max = AICA_BUFFER_SIZE,
- .period_bytes_min = AICA_PERIOD_SIZE,
- .period_bytes_max = AICA_PERIOD_SIZE,
- .periods_min = AICA_PERIOD_NUMBER,
- .periods_max = AICA_PERIOD_NUMBER,
-};
-
-static int aica_dma_transfer(int channels, int buffer_size,
- struct snd_pcm_substream *substream)
-{
- int q, err, period_offset;
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- unsigned long flags;
- err = 0;
- dreamcastcard = substream->pcm->private_data;
- period_offset = dreamcastcard->clicks;
- period_offset %= (AICA_PERIOD_NUMBER / channels);
- runtime = substream->runtime;
- for (q = 0; q < channels; q++) {
- local_irq_save(flags);
- err = dma_xfer(AICA_DMA_CHANNEL,
- (unsigned long) (runtime->dma_area +
- (AICA_BUFFER_SIZE * q) /
- channels +
- AICA_PERIOD_SIZE *
- period_offset),
- AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
- AICA_PERIOD_SIZE * period_offset,
- buffer_size / channels, AICA_DMA_MODE);
- if (unlikely(err < 0)) {
- local_irq_restore(flags);
- break;
- }
- dma_wait_for_completion(AICA_DMA_CHANNEL);
- local_irq_restore(flags);
- }
- return err;
-}
-
-static void startup_aica(struct snd_card_aica *dreamcastcard)
-{
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- aica_chn_start();
-}
-
-static void run_spu_dma(struct work_struct *work)
-{
- int buffer_size;
- struct snd_pcm_runtime *runtime;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard =
- container_of(work, struct snd_card_aica, spu_dma_work);
- runtime = dreamcastcard->substream->runtime;
- if (unlikely(dreamcastcard->dma_check == 0)) {
- buffer_size =
- frames_to_bytes(runtime, runtime->buffer_size);
- if (runtime->channels > 1)
- dreamcastcard->channel->flags |= 0x01;
- aica_dma_transfer(runtime->channels, buffer_size,
- dreamcastcard->substream);
- startup_aica(dreamcastcard);
- dreamcastcard->clicks =
- buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
- return;
- } else {
- aica_dma_transfer(runtime->channels,
- AICA_PERIOD_SIZE * runtime->channels,
- dreamcastcard->substream);
- snd_pcm_period_elapsed(dreamcastcard->substream);
- dreamcastcard->clicks++;
- if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
- dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
- mod_timer(&dreamcastcard->timer, jiffies + 1);
- }
-}
-
-static void aica_period_elapsed(struct timer_list *t)
-{
- struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
- t, timer);
- struct snd_pcm_substream *substream = dreamcastcard->substream;
- /*timer function - so cannot sleep */
- int play_period;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /* Have we played out an additional period? */
- play_period =
- frames_to_bytes(runtime,
- readl
- (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
- AICA_PERIOD_SIZE;
- if (play_period == dreamcastcard->current_period) {
- /* reschedule the timer */
- mod_timer(&(dreamcastcard->timer), jiffies + 1);
- return;
- }
- if (runtime->channels > 1)
- dreamcastcard->current_period = play_period;
- if (unlikely(dreamcastcard->dma_check == 0))
- dreamcastcard->dma_check = 1;
- schedule_work(&(dreamcastcard->spu_dma_work));
-}
-
-static void spu_begin_dma(struct snd_pcm_substream *substream)
-{
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /*get the queue to do the work */
- schedule_work(&(dreamcastcard->spu_dma_work));
- mod_timer(&dreamcastcard->timer, jiffies + 4);
-}
-
-static int snd_aicapcm_pcm_open(struct snd_pcm_substream
- *substream)
-{
- struct snd_pcm_runtime *runtime;
- struct aica_channel *channel;
- struct snd_card_aica *dreamcastcard;
- if (!enable)
- return -ENOENT;
- dreamcastcard = substream->pcm->private_data;
- channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
- if (!channel)
- return -ENOMEM;
- /* set defaults for channel */
- channel->sfmt = SM_8BIT;
- channel->cmd = AICA_CMD_START;
- channel->vol = dreamcastcard->master_volume;
- channel->pan = 0x80;
- channel->pos = 0;
- channel->flags = 0; /* default to mono */
- dreamcastcard->channel = channel;
- runtime = substream->runtime;
- runtime->hw = snd_pcm_aica_playback_hw;
- spu_enable();
- dreamcastcard->clicks = 0;
- dreamcastcard->current_period = 0;
- dreamcastcard->dma_check = 0;
- return 0;
-}
-
-static int snd_aicapcm_pcm_close(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- flush_work(&(dreamcastcard->spu_dma_work));
- del_timer(&dreamcastcard->timer);
- dreamcastcard->substream = NULL;
- kfree(dreamcastcard->channel);
- spu_disable();
- return 0;
-}
-
-static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
- dreamcastcard->channel->sfmt = SM_16BIT;
- dreamcastcard->channel->freq = substream->runtime->rate;
- dreamcastcard->substream = substream;
- return 0;
-}
-
-static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
- *substream, int cmd)
-{
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- spu_begin_dma(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- aica_chn_halt();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
- *substream)
-{
- return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
-}
-
-static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
- .open = snd_aicapcm_pcm_open,
- .close = snd_aicapcm_pcm_close,
- .prepare = snd_aicapcm_pcm_prepare,
- .trigger = snd_aicapcm_pcm_trigger,
- .pointer = snd_aicapcm_pcm_pointer,
-};
-
-/* TO DO: set up to handle more than one pcm instance */
-static int __init snd_aicapcmchip(struct snd_card_aica
- *dreamcastcard, int pcm_index)
-{
- struct snd_pcm *pcm;
- int err;
- /* AICA has no capture ability */
- err =
- snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
- &pcm);
- if (unlikely(err < 0))
- return err;
- pcm->private_data = dreamcastcard;
- strcpy(pcm->name, "AICA PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
- &snd_aicapcm_playback_ops);
- /* Allocate the DMA buffers */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- AICA_BUFFER_SIZE,
- AICA_BUFFER_SIZE);
- return 0;
-}
-
-/* Mixer controls */
-#define aica_pcmswitch_info snd_ctl_boolean_mono_info
-
-static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
- return 0;
-}
-
-static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- if (ucontrol->value.integer.value[0] == 1)
- return 0; /* TO DO: Fix me */
- else
- aica_chn_halt();
- return 0;
-}
-
-static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 0xFF;
- return 0;
-}
-
-static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY; /* we've not yet been set up */
- ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
- return 0;
-}
-
-static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- unsigned int vol;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY;
- vol = ucontrol->value.integer.value[0];
- if (vol > 0xff)
- return -EINVAL;
- if (unlikely(dreamcastcard->channel->vol == vol))
- return 0;
- dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
- dreamcastcard->master_volume = ucontrol->value.integer.value[0];
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- return 1;
-}
-
-static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Switch",
- .index = 0,
- .info = aica_pcmswitch_info,
- .get = aica_pcmswitch_get,
- .put = aica_pcmswitch_put
-};
-
-static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = aica_pcmvolume_info,
- .get = aica_pcmvolume_get,
- .put = aica_pcmvolume_put
-};
-
-static int load_aica_firmware(void)
-{
- int err;
- const struct firmware *fw_entry;
- spu_reset();
- err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
- if (unlikely(err))
- return err;
- /* write firmware into memory */
- spu_disable();
- spu_memload(0, fw_entry->data, fw_entry->size);
- spu_enable();
- release_firmware(fw_entry);
- return err;
-}
-
-static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
-{
- int err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- return 0;
-}
-
-static int snd_aica_remove(struct platform_device *devptr)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = platform_get_drvdata(devptr);
- if (unlikely(!dreamcastcard))
- return -ENODEV;
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return 0;
-}
-
-static int snd_aica_probe(struct platform_device *devptr)
-{
- int err;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
- if (unlikely(!dreamcastcard))
- return -ENOMEM;
- err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
- THIS_MODULE, 0, &dreamcastcard->card);
- if (unlikely(err < 0)) {
- kfree(dreamcastcard);
- return err;
- }
- strcpy(dreamcastcard->card->driver, "snd_aica");
- strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
- strcpy(dreamcastcard->card->longname,
- "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
- /* Prepare to use the queue */
- INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
- timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
- /* Load the PCM 'chip' */
- err = snd_aicapcmchip(dreamcastcard, 0);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Add basic controls */
- err = add_aicamixer_controls(dreamcastcard);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Register the card with ALSA subsystem */
- err = snd_card_register(dreamcastcard->card);
- if (unlikely(err < 0))
- goto freedreamcast;
- platform_set_drvdata(devptr, dreamcastcard);
- snd_printk
- ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
- return 0;
- freedreamcast:
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return err;
-}
-
-static struct platform_driver snd_aica_driver = {
- .probe = snd_aica_probe,
- .remove = snd_aica_remove,
- .driver = {
- .name = SND_AICA_DRIVER,
- },
-};
-
-static int __init aica_init(void)
-{
- int err;
- err = platform_driver_register(&snd_aica_driver);
- if (unlikely(err < 0))
- return err;
- pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
- aica_memory_space, 2);
- if (IS_ERR(pd)) {
- platform_driver_unregister(&snd_aica_driver);
- return PTR_ERR(pd);
- }
- /* Load the firmware */
- return load_aica_firmware();
-}
-
-static void __exit aica_exit(void)
-{
- platform_device_unregister(pd);
- platform_driver_unregister(&snd_aica_driver);
- /* Kill any sound still playing and reset ARM7 to safe state */
- spu_reset();
-}
-
-module_init(aica_init);
-module_exit(aica_exit);
diff --git a/sound/sh/aica.h b/sound/sh/aica.h
deleted file mode 100644
index 021b132e088e82..00000000000000
--- a/sound/sh/aica.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* aica.h
- * Header file for ALSA driver for
- * Sega Dreamcast Yamaha AICA sound
- * Copyright Adrian McMenamin
- * <adrian@mcmen.demon.co.uk>
- * 2006
- */
-
-/* SPU memory and register constants etc */
-#define G2_FIFO 0xa05f688c
-#define SPU_MEMORY_BASE 0xA0800000
-#define ARM_RESET_REGISTER 0xA0702C00
-#define SPU_REGISTER_BASE 0xA0700000
-
-/* AICA channels stuff */
-#define AICA_CONTROL_POINT 0xA0810000
-#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
-#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
-
-/* Command values */
-#define AICA_CMD_KICK 0x80000000
-#define AICA_CMD_NONE 0
-#define AICA_CMD_START 1
-#define AICA_CMD_STOP 2
-#define AICA_CMD_VOL 3
-
-/* Sound modes */
-#define SM_8BIT 1
-#define SM_16BIT 0
-#define SM_ADPCM 2
-
-/* Buffer and period size */
-#define AICA_BUFFER_SIZE 0x8000
-#define AICA_PERIOD_SIZE 0x800
-#define AICA_PERIOD_NUMBER 16
-
-#define AICA_CHANNEL0_OFFSET 0x11000
-#define AICA_CHANNEL1_OFFSET 0x21000
-#define CHANNEL_OFFSET 0x10000
-
-#define AICA_DMA_CHANNEL 5
-#define AICA_DMA_MODE 5
-
-#define SND_AICA_DRIVER "AICA"
-
-struct aica_channel {
- uint32_t cmd; /* Command ID */
- uint32_t pos; /* Sample position */
- uint32_t length; /* Sample length */
- uint32_t freq; /* Frequency */
- uint32_t vol; /* Volume 0-255 */
- uint32_t pan; /* Pan 0-255 */
- uint32_t sfmt; /* Sound format */
- uint32_t flags; /* Bit flags */
-};
-
-struct snd_card_aica {
- struct work_struct spu_dma_work;
- struct snd_card *card;
- struct aica_channel *channel;
- struct snd_pcm_substream *substream;
- int clicks;
- int current_period;
- struct timer_list timer;
- int master_volume;
- int dma_check;
-};
diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
deleted file mode 100644
index 8ebd972846acb5..00000000000000
--- a/sound/sh/sh_dac_audio.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * sh_dac_audio.c - SuperH DAC audio driver for ALSA
- *
- * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
- *
- * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
- */
-
-#include <linux/hrtimer.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/clock.h>
-#include <asm/hd64461.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
-MODULE_DESCRIPTION("SuperH DAC audio driver");
-MODULE_LICENSE("GPL");
-
-/* Module Parameters */
-static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
-
-/* main struct */
-struct snd_sh_dac {
- struct snd_card *card;
- struct snd_pcm_substream *substream;
- struct hrtimer hrtimer;
- ktime_t wakeups_per_second;
-
- int rate;
- int empty;
- char *data_buffer, *buffer_begin, *buffer_end;
- int processed; /* bytes proccesed, to compare with period_size */
- int buffer_size;
- struct dac_audio_pdata *pdata;
-};
-
-
-static void dac_audio_start_timer(struct snd_sh_dac *chip)
-{
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-}
-
-static void dac_audio_stop_timer(struct snd_sh_dac *chip)
-{
- hrtimer_cancel(&chip->hrtimer);
-}
-
-static void dac_audio_reset(struct snd_sh_dac *chip)
-{
- dac_audio_stop_timer(chip);
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-}
-
-static void dac_audio_set_rate(struct snd_sh_dac *chip)
-{
- chip->wakeups_per_second = 1000000000 / chip->rate;
-}
-
-
-/* PCM INTERFACE */
-
-static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_HALF_DUPLEX),
- .formats = SNDRV_PCM_FMTBIT_U8,
- .rates = SNDRV_PCM_RATE_8000,
- .rate_min = 8000,
- .rate_max = 8000,
- .channels_min = 1,
- .channels_max = 1,
- .buffer_bytes_max = (48*1024),
- .period_bytes_min = 1,
- .period_bytes_max = (48*1024),
- .periods_min = 1,
- .periods_max = 1024,
-};
-
-static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- runtime->hw = snd_sh_dac_pcm_hw;
-
- chip->substream = substream;
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-
- chip->pdata->start(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- chip->substream = NULL;
-
- dac_audio_stop_timer(chip);
- chip->pdata->stop(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
-
- chip->buffer_size = runtime->buffer_size;
- memset(chip->data_buffer, 0, chip->pdata->buffer_size);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- dac_audio_start_timer(chip);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
- dac_audio_stop_timer(chip);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void __user *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- if (copy_from_user_toio(chip->data_buffer + pos, src, count))
- return -EFAULT;
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memcpy_toio(chip->data_buffer + pos, src, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memset_io(chip->data_buffer + pos, 0, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static
-snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- int pointer = chip->buffer_begin - chip->data_buffer;
-
- return pointer;
-}
-
-/* pcm ops */
-static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
- .open = snd_sh_dac_pcm_open,
- .close = snd_sh_dac_pcm_close,
- .prepare = snd_sh_dac_pcm_prepare,
- .trigger = snd_sh_dac_pcm_trigger,
- .pointer = snd_sh_dac_pcm_pointer,
- .copy_user = snd_sh_dac_pcm_copy,
- .copy_kernel = snd_sh_dac_pcm_copy_kernel,
- .fill_silence = snd_sh_dac_pcm_silence,
- .mmap = snd_pcm_lib_mmap_iomem,
-};
-
-static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
-{
- int err;
- struct snd_pcm *pcm;
-
- /* device should be always 0 for us */
- err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
- if (err < 0)
- return err;
-
- pcm->private_data = chip;
- strcpy(pcm->name, "SH_DAC PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
-
- /* buffer size=48K */
- snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- NULL, 48 * 1024, 48 * 1024);
-
- return 0;
-}
-/* END OF PCM INTERFACE */
-
-
-/* driver .remove -- destructor */
-static int snd_sh_dac_remove(struct platform_device *devptr)
-{
- snd_card_free(platform_get_drvdata(devptr));
- return 0;
-}
-
-/* free -- it has been defined by create */
-static int snd_sh_dac_free(struct snd_sh_dac *chip)
-{
- /* release the data */
- kfree(chip->data_buffer);
- kfree(chip);
-
- return 0;
-}
-
-static int snd_sh_dac_dev_free(struct snd_device *device)
-{
- struct snd_sh_dac *chip = device->device_data;
-
- return snd_sh_dac_free(chip);
-}
-
-static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
-{
- struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
- hrtimer);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
- ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
-
- if (!chip->empty) {
- sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
- chip->buffer_begin++;
-
- chip->processed++;
- if (chip->processed >= b_ps) {
- chip->processed -= b_ps;
- snd_pcm_period_elapsed(chip->substream);
- }
-
- if (chip->buffer_begin == (chip->data_buffer +
- chip->buffer_size - 1))
- chip->buffer_begin = chip->data_buffer;
-
- if (chip->buffer_begin == chip->buffer_end)
- chip->empty = 1;
-
- }
-
- if (!chip->empty)
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-
- return HRTIMER_NORESTART;
-}
-
-/* create -- chip-specific constructor for the cards components */
-static int snd_sh_dac_create(struct snd_card *card,
- struct platform_device *devptr,
- struct snd_sh_dac **rchip)
-{
- struct snd_sh_dac *chip;
- int err;
-
- static const struct snd_device_ops ops = {
- .dev_free = snd_sh_dac_dev_free,
- };
-
- *rchip = NULL;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
-
- chip->card = card;
-
- hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- chip->hrtimer.function = sh_dac_audio_timer;
-
- dac_audio_reset(chip);
- chip->rate = 8000;
- dac_audio_set_rate(chip);
-
- chip->pdata = devptr->dev.platform_data;
-
- chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
- if (chip->data_buffer == NULL) {
- kfree(chip);
- return -ENOMEM;
- }
-
- err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
- if (err < 0) {
- snd_sh_dac_free(chip);
- return err;
- }
-
- *rchip = chip;
-
- return 0;
-}
-
-/* driver .probe -- constructor */
-static int snd_sh_dac_probe(struct platform_device *devptr)
-{
- struct snd_sh_dac *chip;
- struct snd_card *card;
- int err;
-
- err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot allocate the card\n");
- return err;
- }
-
- err = snd_sh_dac_create(card, devptr, &chip);
- if (err < 0)
- goto probe_error;
-
- err = snd_sh_dac_pcm(chip, 0);
- if (err < 0)
- goto probe_error;
-
- strcpy(card->driver, "snd_sh_dac");
- strcpy(card->shortname, "SuperH DAC audio driver");
- printk(KERN_INFO "%s %s", card->longname, card->shortname);
-
- err = snd_card_register(card);
- if (err < 0)
- goto probe_error;
-
- snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
-
- platform_set_drvdata(devptr, card);
- return 0;
-
-probe_error:
- snd_card_free(card);
- return err;
-}
-
-/*
- * "driver" definition
- */
-static struct platform_driver sh_dac_driver = {
- .probe = snd_sh_dac_probe,
- .remove = snd_sh_dac_remove,
- .driver = {
- .name = "dac_audio",
- },
-};
-
-module_platform_driver(sh_dac_driver);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 04/22] sound: remove sound/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/Kconfig | 2 -
sound/Makefile | 2 +-
sound/sh/Kconfig | 32 --
sound/sh/Makefile | 11 -
sound/sh/aica.c | 628 ----------------------------------------
sound/sh/aica.h | 68 -----
sound/sh/sh_dac_audio.c | 412 --------------------------
7 files changed, 1 insertion(+), 1154 deletions(-)
delete mode 100644 sound/sh/Kconfig
delete mode 100644 sound/sh/Makefile
delete mode 100644 sound/sh/aica.c
delete mode 100644 sound/sh/aica.h
delete mode 100644 sound/sh/sh_dac_audio.c
diff --git a/sound/Kconfig b/sound/Kconfig
index e56d96d2b11cae..14361bb428baa1 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
source "sound/mips/Kconfig"
-source "sound/sh/Kconfig"
-
# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
diff --git a/sound/Makefile b/sound/Makefile
index 04ef04b1168f39..bb4b8806321c67 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_DMASOUND) += oss/dmasound/
-obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
virtio/
obj-$(CONFIG_SND_AOA) += aoa/
diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
deleted file mode 100644
index b75fbb3236a7b9..00000000000000
--- a/sound/sh/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# ALSA SH drivers
-
-menuconfig SND_SUPERH
- bool "SUPERH sound devices"
- depends on SUPERH
- default y
- help
- Support for sound devices specific to SUPERH architectures.
- Drivers that are implemented on ASoC can be found in
- "ALSA for SoC audio support" section.
-
-if SND_SUPERH
-
-config SND_AICA
- tristate "Dreamcast Yamaha AICA sound"
- depends on SH_DREAMCAST
- select SND_PCM
- select G2_DMA
- help
- ALSA Sound driver for the SEGA Dreamcast console.
-
-config SND_SH_DAC_AUDIO
- tristate "SuperH DAC audio support"
- depends on SND
- depends on CPU_SH3 && HIGH_RES_TIMERS
- select SND_PCM
- help
- Say Y here to include support for the on-chip DAC.
-
-endif # SND_SUPERH
-
diff --git a/sound/sh/Makefile b/sound/sh/Makefile
deleted file mode 100644
index c0bbc500c17c73..00000000000000
--- a/sound/sh/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for ALSA
-#
-
-snd-aica-objs := aica.o
-snd-sh_dac_audio-objs := sh_dac_audio.o
-
-# Toplevel Module Dependency
-obj-$(CONFIG_SND_AICA) += snd-aica.o
-obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
deleted file mode 100644
index 6e9d6bd67369af..00000000000000
--- a/sound/sh/aica.c
+++ /dev/null
@@ -1,628 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
-*
-* Copyright Adrian McMenamin 2005, 2006, 2007
-* <adrian@mcmen.demon.co.uk>
-* Requires firmware (BSD licenced) available from:
-* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
-* or the maintainer
-*/
-
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/firmware.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
-#include <sound/core.h>
-#include <sound/control.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/info.h>
-#include <asm/dma.h>
-#include <mach/sysasic.h>
-#include "aica.h"
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("aica_firmware.bin");
-
-/* module parameters */
-#define CARD_NAME "AICA"
-static int index = -1;
-static char *id;
-static bool enable = 1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
-module_param(enable, bool, 0644);
-MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-
-/* Simple platform device */
-static struct platform_device *pd;
-static struct resource aica_memory_space[2] = {
- {
- .name = "AICA ARM CONTROL",
- .start = ARM_RESET_REGISTER,
- .flags = IORESOURCE_MEM,
- .end = ARM_RESET_REGISTER + 3,
- },
- {
- .name = "AICA Sound RAM",
- .start = SPU_MEMORY_BASE,
- .flags = IORESOURCE_MEM,
- .end = SPU_MEMORY_BASE + 0x200000 - 1,
- },
-};
-
-/* SPU specific functions */
-/* spu_write_wait - wait for G2-SH FIFO to clear */
-static void spu_write_wait(void)
-{
- int time_count;
- time_count = 0;
- while (1) {
- if (!(readl(G2_FIFO) & 0x11))
- break;
- /* To ensure hardware failure doesn't wedge kernel */
- time_count++;
- if (time_count > 0x10000) {
- snd_printk
- ("WARNING: G2 FIFO appears to be blocked.\n");
- break;
- }
- }
-}
-
-/* spu_memset - write to memory in SPU address space */
-static void spu_memset(u32 toi, u32 what, int length)
-{
- int i;
- unsigned long flags;
- if (snd_BUG_ON(length % 4))
- return;
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- local_irq_save(flags);
- writel(what, toi + SPU_MEMORY_BASE);
- local_irq_restore(flags);
- toi++;
- }
-}
-
-/* spu_memload - write to SPU address space */
-static void spu_memload(u32 toi, const void *from, int length)
-{
- unsigned long flags;
- const u32 *froml = from;
- u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
- int i;
- u32 val;
- length = DIV_ROUND_UP(length, 4);
- spu_write_wait();
- for (i = 0; i < length; i++) {
- if (!(i % 8))
- spu_write_wait();
- val = *froml;
- local_irq_save(flags);
- writel(val, to);
- local_irq_restore(flags);
- froml++;
- to++;
- }
-}
-
-/* spu_disable - set spu registers to stop sound output */
-static void spu_disable(void)
-{
- int i;
- unsigned long flags;
- u32 regval;
- spu_write_wait();
- regval = readl(ARM_RESET_REGISTER);
- regval |= 1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
- for (i = 0; i < 64; i++) {
- spu_write_wait();
- regval = readl(SPU_REGISTER_BASE + (i * 0x80));
- regval = (regval & ~0x4000) | 0x8000;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, SPU_REGISTER_BASE + (i * 0x80));
- local_irq_restore(flags);
- }
-}
-
-/* spu_enable - set spu registers to enable sound output */
-static void spu_enable(void)
-{
- unsigned long flags;
- u32 regval = readl(ARM_RESET_REGISTER);
- regval &= ~1;
- spu_write_wait();
- local_irq_save(flags);
- writel(regval, ARM_RESET_REGISTER);
- local_irq_restore(flags);
-}
-
-/*
- * Halt the sound processor, clear the memory,
- * load some default ARM7 code, and then restart ARM7
-*/
-static void spu_reset(void)
-{
- unsigned long flags;
- spu_disable();
- spu_memset(0, 0, 0x200000 / 4);
- /* Put ARM7 in endless loop */
- local_irq_save(flags);
- __raw_writel(0xea000002, SPU_MEMORY_BASE);
- local_irq_restore(flags);
- spu_enable();
-}
-
-/* aica_chn_start - write to spu to start playback */
-static void aica_chn_start(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* aica_chn_halt - write to spu to halt playback */
-static void aica_chn_halt(void)
-{
- unsigned long flags;
- spu_write_wait();
- local_irq_save(flags);
- writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
- local_irq_restore(flags);
-}
-
-/* ALSA code below */
-static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
- .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
- .formats =
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_IMA_ADPCM),
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 1,
- .channels_max = 2,
- .buffer_bytes_max = AICA_BUFFER_SIZE,
- .period_bytes_min = AICA_PERIOD_SIZE,
- .period_bytes_max = AICA_PERIOD_SIZE,
- .periods_min = AICA_PERIOD_NUMBER,
- .periods_max = AICA_PERIOD_NUMBER,
-};
-
-static int aica_dma_transfer(int channels, int buffer_size,
- struct snd_pcm_substream *substream)
-{
- int q, err, period_offset;
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- unsigned long flags;
- err = 0;
- dreamcastcard = substream->pcm->private_data;
- period_offset = dreamcastcard->clicks;
- period_offset %= (AICA_PERIOD_NUMBER / channels);
- runtime = substream->runtime;
- for (q = 0; q < channels; q++) {
- local_irq_save(flags);
- err = dma_xfer(AICA_DMA_CHANNEL,
- (unsigned long) (runtime->dma_area +
- (AICA_BUFFER_SIZE * q) /
- channels +
- AICA_PERIOD_SIZE *
- period_offset),
- AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
- AICA_PERIOD_SIZE * period_offset,
- buffer_size / channels, AICA_DMA_MODE);
- if (unlikely(err < 0)) {
- local_irq_restore(flags);
- break;
- }
- dma_wait_for_completion(AICA_DMA_CHANNEL);
- local_irq_restore(flags);
- }
- return err;
-}
-
-static void startup_aica(struct snd_card_aica *dreamcastcard)
-{
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- aica_chn_start();
-}
-
-static void run_spu_dma(struct work_struct *work)
-{
- int buffer_size;
- struct snd_pcm_runtime *runtime;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard =
- container_of(work, struct snd_card_aica, spu_dma_work);
- runtime = dreamcastcard->substream->runtime;
- if (unlikely(dreamcastcard->dma_check == 0)) {
- buffer_size =
- frames_to_bytes(runtime, runtime->buffer_size);
- if (runtime->channels > 1)
- dreamcastcard->channel->flags |= 0x01;
- aica_dma_transfer(runtime->channels, buffer_size,
- dreamcastcard->substream);
- startup_aica(dreamcastcard);
- dreamcastcard->clicks =
- buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
- return;
- } else {
- aica_dma_transfer(runtime->channels,
- AICA_PERIOD_SIZE * runtime->channels,
- dreamcastcard->substream);
- snd_pcm_period_elapsed(dreamcastcard->substream);
- dreamcastcard->clicks++;
- if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
- dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
- mod_timer(&dreamcastcard->timer, jiffies + 1);
- }
-}
-
-static void aica_period_elapsed(struct timer_list *t)
-{
- struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
- t, timer);
- struct snd_pcm_substream *substream = dreamcastcard->substream;
- /*timer function - so cannot sleep */
- int play_period;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /* Have we played out an additional period? */
- play_period =
- frames_to_bytes(runtime,
- readl
- (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
- AICA_PERIOD_SIZE;
- if (play_period == dreamcastcard->current_period) {
- /* reschedule the timer */
- mod_timer(&(dreamcastcard->timer), jiffies + 1);
- return;
- }
- if (runtime->channels > 1)
- dreamcastcard->current_period = play_period;
- if (unlikely(dreamcastcard->dma_check == 0))
- dreamcastcard->dma_check = 1;
- schedule_work(&(dreamcastcard->spu_dma_work));
-}
-
-static void spu_begin_dma(struct snd_pcm_substream *substream)
-{
- struct snd_card_aica *dreamcastcard;
- struct snd_pcm_runtime *runtime;
- runtime = substream->runtime;
- dreamcastcard = substream->pcm->private_data;
- /*get the queue to do the work */
- schedule_work(&(dreamcastcard->spu_dma_work));
- mod_timer(&dreamcastcard->timer, jiffies + 4);
-}
-
-static int snd_aicapcm_pcm_open(struct snd_pcm_substream
- *substream)
-{
- struct snd_pcm_runtime *runtime;
- struct aica_channel *channel;
- struct snd_card_aica *dreamcastcard;
- if (!enable)
- return -ENOENT;
- dreamcastcard = substream->pcm->private_data;
- channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
- if (!channel)
- return -ENOMEM;
- /* set defaults for channel */
- channel->sfmt = SM_8BIT;
- channel->cmd = AICA_CMD_START;
- channel->vol = dreamcastcard->master_volume;
- channel->pan = 0x80;
- channel->pos = 0;
- channel->flags = 0; /* default to mono */
- dreamcastcard->channel = channel;
- runtime = substream->runtime;
- runtime->hw = snd_pcm_aica_playback_hw;
- spu_enable();
- dreamcastcard->clicks = 0;
- dreamcastcard->current_period = 0;
- dreamcastcard->dma_check = 0;
- return 0;
-}
-
-static int snd_aicapcm_pcm_close(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- flush_work(&(dreamcastcard->spu_dma_work));
- del_timer(&dreamcastcard->timer);
- dreamcastcard->substream = NULL;
- kfree(dreamcastcard->channel);
- spu_disable();
- return 0;
-}
-
-static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
- *substream)
-{
- struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
- if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
- dreamcastcard->channel->sfmt = SM_16BIT;
- dreamcastcard->channel->freq = substream->runtime->rate;
- dreamcastcard->substream = substream;
- return 0;
-}
-
-static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
- *substream, int cmd)
-{
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- spu_begin_dma(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- aica_chn_halt();
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
- *substream)
-{
- return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
-}
-
-static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
- .open = snd_aicapcm_pcm_open,
- .close = snd_aicapcm_pcm_close,
- .prepare = snd_aicapcm_pcm_prepare,
- .trigger = snd_aicapcm_pcm_trigger,
- .pointer = snd_aicapcm_pcm_pointer,
-};
-
-/* TO DO: set up to handle more than one pcm instance */
-static int __init snd_aicapcmchip(struct snd_card_aica
- *dreamcastcard, int pcm_index)
-{
- struct snd_pcm *pcm;
- int err;
- /* AICA has no capture ability */
- err =
- snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
- &pcm);
- if (unlikely(err < 0))
- return err;
- pcm->private_data = dreamcastcard;
- strcpy(pcm->name, "AICA PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
- &snd_aicapcm_playback_ops);
- /* Allocate the DMA buffers */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- AICA_BUFFER_SIZE,
- AICA_BUFFER_SIZE);
- return 0;
-}
-
-/* Mixer controls */
-#define aica_pcmswitch_info snd_ctl_boolean_mono_info
-
-static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
- return 0;
-}
-
-static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- if (ucontrol->value.integer.value[0] == 1)
- return 0; /* TO DO: Fix me */
- else
- aica_chn_halt();
- return 0;
-}
-
-static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 0xFF;
- return 0;
-}
-
-static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY; /* we've not yet been set up */
- ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
- return 0;
-}
-
-static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_card_aica *dreamcastcard;
- unsigned int vol;
- dreamcastcard = kcontrol->private_data;
- if (unlikely(!dreamcastcard->channel))
- return -ETXTBSY;
- vol = ucontrol->value.integer.value[0];
- if (vol > 0xff)
- return -EINVAL;
- if (unlikely(dreamcastcard->channel->vol == vol))
- return 0;
- dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
- dreamcastcard->master_volume = ucontrol->value.integer.value[0];
- spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
- dreamcastcard->channel, sizeof(struct aica_channel));
- return 1;
-}
-
-static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Switch",
- .index = 0,
- .info = aica_pcmswitch_info,
- .get = aica_pcmswitch_get,
- .put = aica_pcmswitch_put
-};
-
-static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = aica_pcmvolume_info,
- .get = aica_pcmvolume_get,
- .put = aica_pcmvolume_put
-};
-
-static int load_aica_firmware(void)
-{
- int err;
- const struct firmware *fw_entry;
- spu_reset();
- err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
- if (unlikely(err))
- return err;
- /* write firmware into memory */
- spu_disable();
- spu_memload(0, fw_entry->data, fw_entry->size);
- spu_enable();
- release_firmware(fw_entry);
- return err;
-}
-
-static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
-{
- int err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- err = snd_ctl_add
- (dreamcastcard->card,
- snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
- if (unlikely(err < 0))
- return err;
- return 0;
-}
-
-static int snd_aica_remove(struct platform_device *devptr)
-{
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = platform_get_drvdata(devptr);
- if (unlikely(!dreamcastcard))
- return -ENODEV;
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return 0;
-}
-
-static int snd_aica_probe(struct platform_device *devptr)
-{
- int err;
- struct snd_card_aica *dreamcastcard;
- dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
- if (unlikely(!dreamcastcard))
- return -ENOMEM;
- err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
- THIS_MODULE, 0, &dreamcastcard->card);
- if (unlikely(err < 0)) {
- kfree(dreamcastcard);
- return err;
- }
- strcpy(dreamcastcard->card->driver, "snd_aica");
- strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
- strcpy(dreamcastcard->card->longname,
- "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
- /* Prepare to use the queue */
- INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
- timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
- /* Load the PCM 'chip' */
- err = snd_aicapcmchip(dreamcastcard, 0);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Add basic controls */
- err = add_aicamixer_controls(dreamcastcard);
- if (unlikely(err < 0))
- goto freedreamcast;
- /* Register the card with ALSA subsystem */
- err = snd_card_register(dreamcastcard->card);
- if (unlikely(err < 0))
- goto freedreamcast;
- platform_set_drvdata(devptr, dreamcastcard);
- snd_printk
- ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
- return 0;
- freedreamcast:
- snd_card_free(dreamcastcard->card);
- kfree(dreamcastcard);
- return err;
-}
-
-static struct platform_driver snd_aica_driver = {
- .probe = snd_aica_probe,
- .remove = snd_aica_remove,
- .driver = {
- .name = SND_AICA_DRIVER,
- },
-};
-
-static int __init aica_init(void)
-{
- int err;
- err = platform_driver_register(&snd_aica_driver);
- if (unlikely(err < 0))
- return err;
- pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
- aica_memory_space, 2);
- if (IS_ERR(pd)) {
- platform_driver_unregister(&snd_aica_driver);
- return PTR_ERR(pd);
- }
- /* Load the firmware */
- return load_aica_firmware();
-}
-
-static void __exit aica_exit(void)
-{
- platform_device_unregister(pd);
- platform_driver_unregister(&snd_aica_driver);
- /* Kill any sound still playing and reset ARM7 to safe state */
- spu_reset();
-}
-
-module_init(aica_init);
-module_exit(aica_exit);
diff --git a/sound/sh/aica.h b/sound/sh/aica.h
deleted file mode 100644
index 021b132e088e82..00000000000000
--- a/sound/sh/aica.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* aica.h
- * Header file for ALSA driver for
- * Sega Dreamcast Yamaha AICA sound
- * Copyright Adrian McMenamin
- * <adrian@mcmen.demon.co.uk>
- * 2006
- */
-
-/* SPU memory and register constants etc */
-#define G2_FIFO 0xa05f688c
-#define SPU_MEMORY_BASE 0xA0800000
-#define ARM_RESET_REGISTER 0xA0702C00
-#define SPU_REGISTER_BASE 0xA0700000
-
-/* AICA channels stuff */
-#define AICA_CONTROL_POINT 0xA0810000
-#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
-#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
-
-/* Command values */
-#define AICA_CMD_KICK 0x80000000
-#define AICA_CMD_NONE 0
-#define AICA_CMD_START 1
-#define AICA_CMD_STOP 2
-#define AICA_CMD_VOL 3
-
-/* Sound modes */
-#define SM_8BIT 1
-#define SM_16BIT 0
-#define SM_ADPCM 2
-
-/* Buffer and period size */
-#define AICA_BUFFER_SIZE 0x8000
-#define AICA_PERIOD_SIZE 0x800
-#define AICA_PERIOD_NUMBER 16
-
-#define AICA_CHANNEL0_OFFSET 0x11000
-#define AICA_CHANNEL1_OFFSET 0x21000
-#define CHANNEL_OFFSET 0x10000
-
-#define AICA_DMA_CHANNEL 5
-#define AICA_DMA_MODE 5
-
-#define SND_AICA_DRIVER "AICA"
-
-struct aica_channel {
- uint32_t cmd; /* Command ID */
- uint32_t pos; /* Sample position */
- uint32_t length; /* Sample length */
- uint32_t freq; /* Frequency */
- uint32_t vol; /* Volume 0-255 */
- uint32_t pan; /* Pan 0-255 */
- uint32_t sfmt; /* Sound format */
- uint32_t flags; /* Bit flags */
-};
-
-struct snd_card_aica {
- struct work_struct spu_dma_work;
- struct snd_card *card;
- struct aica_channel *channel;
- struct snd_pcm_substream *substream;
- int clicks;
- int current_period;
- struct timer_list timer;
- int master_volume;
- int dma_check;
-};
diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
deleted file mode 100644
index 8ebd972846acb5..00000000000000
--- a/sound/sh/sh_dac_audio.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * sh_dac_audio.c - SuperH DAC audio driver for ALSA
- *
- * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
- *
- * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
- */
-
-#include <linux/hrtimer.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/sh_dac_audio.h>
-#include <asm/clock.h>
-#include <asm/hd64461.h>
-#include <mach/hp6xx.h>
-#include <cpu/dac.h>
-
-MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
-MODULE_DESCRIPTION("SuperH DAC audio driver");
-MODULE_LICENSE("GPL");
-
-/* Module Parameters */
-static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-module_param(index, int, 0444);
-MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
-
-/* main struct */
-struct snd_sh_dac {
- struct snd_card *card;
- struct snd_pcm_substream *substream;
- struct hrtimer hrtimer;
- ktime_t wakeups_per_second;
-
- int rate;
- int empty;
- char *data_buffer, *buffer_begin, *buffer_end;
- int processed; /* bytes proccesed, to compare with period_size */
- int buffer_size;
- struct dac_audio_pdata *pdata;
-};
-
-
-static void dac_audio_start_timer(struct snd_sh_dac *chip)
-{
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-}
-
-static void dac_audio_stop_timer(struct snd_sh_dac *chip)
-{
- hrtimer_cancel(&chip->hrtimer);
-}
-
-static void dac_audio_reset(struct snd_sh_dac *chip)
-{
- dac_audio_stop_timer(chip);
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-}
-
-static void dac_audio_set_rate(struct snd_sh_dac *chip)
-{
- chip->wakeups_per_second = 1000000000 / chip->rate;
-}
-
-
-/* PCM INTERFACE */
-
-static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_HALF_DUPLEX),
- .formats = SNDRV_PCM_FMTBIT_U8,
- .rates = SNDRV_PCM_RATE_8000,
- .rate_min = 8000,
- .rate_max = 8000,
- .channels_min = 1,
- .channels_max = 1,
- .buffer_bytes_max = (48*1024),
- .period_bytes_min = 1,
- .period_bytes_max = (48*1024),
- .periods_min = 1,
- .periods_max = 1024,
-};
-
-static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- runtime->hw = snd_sh_dac_pcm_hw;
-
- chip->substream = substream;
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
-
- chip->pdata->start(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- chip->substream = NULL;
-
- dac_audio_stop_timer(chip);
- chip->pdata->stop(chip->pdata);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
-
- chip->buffer_size = runtime->buffer_size;
- memset(chip->data_buffer, 0, chip->pdata->buffer_size);
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- dac_audio_start_timer(chip);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- chip->buffer_begin = chip->buffer_end = chip->data_buffer;
- chip->processed = 0;
- chip->empty = 1;
- dac_audio_stop_timer(chip);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void __user *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- if (copy_from_user_toio(chip->data_buffer + pos, src, count))
- return -EFAULT;
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- void *src, unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memcpy_toio(chip->data_buffer + pos, src, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
- int channel, unsigned long pos,
- unsigned long count)
-{
- /* channel is not used (interleaved data) */
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
-
- memset_io(chip->data_buffer + pos, 0, count);
- chip->buffer_end = chip->data_buffer + pos + count;
-
- if (chip->empty) {
- chip->empty = 0;
- dac_audio_start_timer(chip);
- }
-
- return 0;
-}
-
-static
-snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
- int pointer = chip->buffer_begin - chip->data_buffer;
-
- return pointer;
-}
-
-/* pcm ops */
-static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
- .open = snd_sh_dac_pcm_open,
- .close = snd_sh_dac_pcm_close,
- .prepare = snd_sh_dac_pcm_prepare,
- .trigger = snd_sh_dac_pcm_trigger,
- .pointer = snd_sh_dac_pcm_pointer,
- .copy_user = snd_sh_dac_pcm_copy,
- .copy_kernel = snd_sh_dac_pcm_copy_kernel,
- .fill_silence = snd_sh_dac_pcm_silence,
- .mmap = snd_pcm_lib_mmap_iomem,
-};
-
-static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
-{
- int err;
- struct snd_pcm *pcm;
-
- /* device should be always 0 for us */
- err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
- if (err < 0)
- return err;
-
- pcm->private_data = chip;
- strcpy(pcm->name, "SH_DAC PCM");
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
-
- /* buffer size=48K */
- snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- NULL, 48 * 1024, 48 * 1024);
-
- return 0;
-}
-/* END OF PCM INTERFACE */
-
-
-/* driver .remove -- destructor */
-static int snd_sh_dac_remove(struct platform_device *devptr)
-{
- snd_card_free(platform_get_drvdata(devptr));
- return 0;
-}
-
-/* free -- it has been defined by create */
-static int snd_sh_dac_free(struct snd_sh_dac *chip)
-{
- /* release the data */
- kfree(chip->data_buffer);
- kfree(chip);
-
- return 0;
-}
-
-static int snd_sh_dac_dev_free(struct snd_device *device)
-{
- struct snd_sh_dac *chip = device->device_data;
-
- return snd_sh_dac_free(chip);
-}
-
-static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
-{
- struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
- hrtimer);
- struct snd_pcm_runtime *runtime = chip->substream->runtime;
- ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
-
- if (!chip->empty) {
- sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
- chip->buffer_begin++;
-
- chip->processed++;
- if (chip->processed >= b_ps) {
- chip->processed -= b_ps;
- snd_pcm_period_elapsed(chip->substream);
- }
-
- if (chip->buffer_begin == (chip->data_buffer +
- chip->buffer_size - 1))
- chip->buffer_begin = chip->data_buffer;
-
- if (chip->buffer_begin == chip->buffer_end)
- chip->empty = 1;
-
- }
-
- if (!chip->empty)
- hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
- HRTIMER_MODE_REL);
-
- return HRTIMER_NORESTART;
-}
-
-/* create -- chip-specific constructor for the cards components */
-static int snd_sh_dac_create(struct snd_card *card,
- struct platform_device *devptr,
- struct snd_sh_dac **rchip)
-{
- struct snd_sh_dac *chip;
- int err;
-
- static const struct snd_device_ops ops = {
- .dev_free = snd_sh_dac_dev_free,
- };
-
- *rchip = NULL;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
-
- chip->card = card;
-
- hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- chip->hrtimer.function = sh_dac_audio_timer;
-
- dac_audio_reset(chip);
- chip->rate = 8000;
- dac_audio_set_rate(chip);
-
- chip->pdata = devptr->dev.platform_data;
-
- chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
- if (chip->data_buffer == NULL) {
- kfree(chip);
- return -ENOMEM;
- }
-
- err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
- if (err < 0) {
- snd_sh_dac_free(chip);
- return err;
- }
-
- *rchip = chip;
-
- return 0;
-}
-
-/* driver .probe -- constructor */
-static int snd_sh_dac_probe(struct platform_device *devptr)
-{
- struct snd_sh_dac *chip;
- struct snd_card *card;
- int err;
-
- err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
- if (err < 0) {
- snd_printk(KERN_ERR "cannot allocate the card\n");
- return err;
- }
-
- err = snd_sh_dac_create(card, devptr, &chip);
- if (err < 0)
- goto probe_error;
-
- err = snd_sh_dac_pcm(chip, 0);
- if (err < 0)
- goto probe_error;
-
- strcpy(card->driver, "snd_sh_dac");
- strcpy(card->shortname, "SuperH DAC audio driver");
- printk(KERN_INFO "%s %s", card->longname, card->shortname);
-
- err = snd_card_register(card);
- if (err < 0)
- goto probe_error;
-
- snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
-
- platform_set_drvdata(devptr, card);
- return 0;
-
-probe_error:
- snd_card_free(card);
- return err;
-}
-
-/*
- * "driver" definition
- */
-static struct platform_driver sh_dac_driver = {
- .probe = snd_sh_dac_probe,
- .remove = snd_sh_dac_remove,
- .driver = {
- .name = "dac_audio",
- },
-};
-
-module_platform_driver(sh_dac_driver);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 04/22] sound: remove sound/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 16:18 ` Takashi Iwai
-1 siblings, 0 replies; 263+ messages in thread
From: Takashi Iwai @ 2023-01-13 16:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
On Fri, 13 Jan 2023 07:23:21 +0100,
Christoph Hellwig wrote:
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Supposed you take in your tree:
Acked-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
> ---
> sound/Kconfig | 2 -
> sound/Makefile | 2 +-
> sound/sh/Kconfig | 32 --
> sound/sh/Makefile | 11 -
> sound/sh/aica.c | 628 ----------------------------------------
> sound/sh/aica.h | 68 -----
> sound/sh/sh_dac_audio.c | 412 --------------------------
> 7 files changed, 1 insertion(+), 1154 deletions(-)
> delete mode 100644 sound/sh/Kconfig
> delete mode 100644 sound/sh/Makefile
> delete mode 100644 sound/sh/aica.c
> delete mode 100644 sound/sh/aica.h
> delete mode 100644 sound/sh/sh_dac_audio.c
>
> diff --git a/sound/Kconfig b/sound/Kconfig
> index e56d96d2b11cae..14361bb428baa1 100644
> --- a/sound/Kconfig
> +++ b/sound/Kconfig
> @@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
>
> source "sound/mips/Kconfig"
>
> -source "sound/sh/Kconfig"
> -
> # the following will depend on the order of config.
> # here assuming USB is defined before ALSA
> source "sound/usb/Kconfig"
> diff --git a/sound/Makefile b/sound/Makefile
> index 04ef04b1168f39..bb4b8806321c67 100644
> --- a/sound/Makefile
> +++ b/sound/Makefile
> @@ -4,7 +4,7 @@
>
> obj-$(CONFIG_SOUND) += soundcore.o
> obj-$(CONFIG_DMASOUND) += oss/dmasound/
> -obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
> +obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
> firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
> virtio/
> obj-$(CONFIG_SND_AOA) += aoa/
> diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
> deleted file mode 100644
> index b75fbb3236a7b9..00000000000000
> --- a/sound/sh/Kconfig
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -# ALSA SH drivers
> -
> -menuconfig SND_SUPERH
> - bool "SUPERH sound devices"
> - depends on SUPERH
> - default y
> - help
> - Support for sound devices specific to SUPERH architectures.
> - Drivers that are implemented on ASoC can be found in
> - "ALSA for SoC audio support" section.
> -
> -if SND_SUPERH
> -
> -config SND_AICA
> - tristate "Dreamcast Yamaha AICA sound"
> - depends on SH_DREAMCAST
> - select SND_PCM
> - select G2_DMA
> - help
> - ALSA Sound driver for the SEGA Dreamcast console.
> -
> -config SND_SH_DAC_AUDIO
> - tristate "SuperH DAC audio support"
> - depends on SND
> - depends on CPU_SH3 && HIGH_RES_TIMERS
> - select SND_PCM
> - help
> - Say Y here to include support for the on-chip DAC.
> -
> -endif # SND_SUPERH
> -
> diff --git a/sound/sh/Makefile b/sound/sh/Makefile
> deleted file mode 100644
> index c0bbc500c17c73..00000000000000
> --- a/sound/sh/Makefile
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -#
> -# Makefile for ALSA
> -#
> -
> -snd-aica-objs := aica.o
> -snd-sh_dac_audio-objs := sh_dac_audio.o
> -
> -# Toplevel Module Dependency
> -obj-$(CONFIG_SND_AICA) += snd-aica.o
> -obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
> diff --git a/sound/sh/aica.c b/sound/sh/aica.c
> deleted file mode 100644
> index 6e9d6bd67369af..00000000000000
> --- a/sound/sh/aica.c
> +++ /dev/null
> @@ -1,628 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> -*
> -* Copyright Adrian McMenamin 2005, 2006, 2007
> -* <adrian@mcmen.demon.co.uk>
> -* Requires firmware (BSD licenced) available from:
> -* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
> -* or the maintainer
> -*/
> -
> -#include <linux/init.h>
> -#include <linux/jiffies.h>
> -#include <linux/slab.h>
> -#include <linux/time.h>
> -#include <linux/wait.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/firmware.h>
> -#include <linux/timer.h>
> -#include <linux/delay.h>
> -#include <linux/workqueue.h>
> -#include <linux/io.h>
> -#include <sound/core.h>
> -#include <sound/control.h>
> -#include <sound/pcm.h>
> -#include <sound/initval.h>
> -#include <sound/info.h>
> -#include <asm/dma.h>
> -#include <mach/sysasic.h>
> -#include "aica.h"
> -
> -MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
> -MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
> -MODULE_LICENSE("GPL");
> -MODULE_FIRMWARE("aica_firmware.bin");
> -
> -/* module parameters */
> -#define CARD_NAME "AICA"
> -static int index = -1;
> -static char *id;
> -static bool enable = 1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
> -module_param(enable, bool, 0644);
> -MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
> -
> -/* Simple platform device */
> -static struct platform_device *pd;
> -static struct resource aica_memory_space[2] = {
> - {
> - .name = "AICA ARM CONTROL",
> - .start = ARM_RESET_REGISTER,
> - .flags = IORESOURCE_MEM,
> - .end = ARM_RESET_REGISTER + 3,
> - },
> - {
> - .name = "AICA Sound RAM",
> - .start = SPU_MEMORY_BASE,
> - .flags = IORESOURCE_MEM,
> - .end = SPU_MEMORY_BASE + 0x200000 - 1,
> - },
> -};
> -
> -/* SPU specific functions */
> -/* spu_write_wait - wait for G2-SH FIFO to clear */
> -static void spu_write_wait(void)
> -{
> - int time_count;
> - time_count = 0;
> - while (1) {
> - if (!(readl(G2_FIFO) & 0x11))
> - break;
> - /* To ensure hardware failure doesn't wedge kernel */
> - time_count++;
> - if (time_count > 0x10000) {
> - snd_printk
> - ("WARNING: G2 FIFO appears to be blocked.\n");
> - break;
> - }
> - }
> -}
> -
> -/* spu_memset - write to memory in SPU address space */
> -static void spu_memset(u32 toi, u32 what, int length)
> -{
> - int i;
> - unsigned long flags;
> - if (snd_BUG_ON(length % 4))
> - return;
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(what, toi + SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - toi++;
> - }
> -}
> -
> -/* spu_memload - write to SPU address space */
> -static void spu_memload(u32 toi, const void *from, int length)
> -{
> - unsigned long flags;
> - const u32 *froml = from;
> - u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
> - int i;
> - u32 val;
> - length = DIV_ROUND_UP(length, 4);
> - spu_write_wait();
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - val = *froml;
> - local_irq_save(flags);
> - writel(val, to);
> - local_irq_restore(flags);
> - froml++;
> - to++;
> - }
> -}
> -
> -/* spu_disable - set spu registers to stop sound output */
> -static void spu_disable(void)
> -{
> - int i;
> - unsigned long flags;
> - u32 regval;
> - spu_write_wait();
> - regval = readl(ARM_RESET_REGISTER);
> - regval |= 1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> - for (i = 0; i < 64; i++) {
> - spu_write_wait();
> - regval = readl(SPU_REGISTER_BASE + (i * 0x80));
> - regval = (regval & ~0x4000) | 0x8000;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, SPU_REGISTER_BASE + (i * 0x80));
> - local_irq_restore(flags);
> - }
> -}
> -
> -/* spu_enable - set spu registers to enable sound output */
> -static void spu_enable(void)
> -{
> - unsigned long flags;
> - u32 regval = readl(ARM_RESET_REGISTER);
> - regval &= ~1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> -}
> -
> -/*
> - * Halt the sound processor, clear the memory,
> - * load some default ARM7 code, and then restart ARM7
> -*/
> -static void spu_reset(void)
> -{
> - unsigned long flags;
> - spu_disable();
> - spu_memset(0, 0, 0x200000 / 4);
> - /* Put ARM7 in endless loop */
> - local_irq_save(flags);
> - __raw_writel(0xea000002, SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - spu_enable();
> -}
> -
> -/* aica_chn_start - write to spu to start playback */
> -static void aica_chn_start(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* aica_chn_halt - write to spu to halt playback */
> -static void aica_chn_halt(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* ALSA code below */
> -static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
> - .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
> - .formats =
> - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
> - SNDRV_PCM_FMTBIT_IMA_ADPCM),
> - .rates = SNDRV_PCM_RATE_8000_48000,
> - .rate_min = 8000,
> - .rate_max = 48000,
> - .channels_min = 1,
> - .channels_max = 2,
> - .buffer_bytes_max = AICA_BUFFER_SIZE,
> - .period_bytes_min = AICA_PERIOD_SIZE,
> - .period_bytes_max = AICA_PERIOD_SIZE,
> - .periods_min = AICA_PERIOD_NUMBER,
> - .periods_max = AICA_PERIOD_NUMBER,
> -};
> -
> -static int aica_dma_transfer(int channels, int buffer_size,
> - struct snd_pcm_substream *substream)
> -{
> - int q, err, period_offset;
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - unsigned long flags;
> - err = 0;
> - dreamcastcard = substream->pcm->private_data;
> - period_offset = dreamcastcard->clicks;
> - period_offset %= (AICA_PERIOD_NUMBER / channels);
> - runtime = substream->runtime;
> - for (q = 0; q < channels; q++) {
> - local_irq_save(flags);
> - err = dma_xfer(AICA_DMA_CHANNEL,
> - (unsigned long) (runtime->dma_area +
> - (AICA_BUFFER_SIZE * q) /
> - channels +
> - AICA_PERIOD_SIZE *
> - period_offset),
> - AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
> - AICA_PERIOD_SIZE * period_offset,
> - buffer_size / channels, AICA_DMA_MODE);
> - if (unlikely(err < 0)) {
> - local_irq_restore(flags);
> - break;
> - }
> - dma_wait_for_completion(AICA_DMA_CHANNEL);
> - local_irq_restore(flags);
> - }
> - return err;
> -}
> -
> -static void startup_aica(struct snd_card_aica *dreamcastcard)
> -{
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - aica_chn_start();
> -}
> -
> -static void run_spu_dma(struct work_struct *work)
> -{
> - int buffer_size;
> - struct snd_pcm_runtime *runtime;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard =
> - container_of(work, struct snd_card_aica, spu_dma_work);
> - runtime = dreamcastcard->substream->runtime;
> - if (unlikely(dreamcastcard->dma_check == 0)) {
> - buffer_size =
> - frames_to_bytes(runtime, runtime->buffer_size);
> - if (runtime->channels > 1)
> - dreamcastcard->channel->flags |= 0x01;
> - aica_dma_transfer(runtime->channels, buffer_size,
> - dreamcastcard->substream);
> - startup_aica(dreamcastcard);
> - dreamcastcard->clicks =
> - buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
> - return;
> - } else {
> - aica_dma_transfer(runtime->channels,
> - AICA_PERIOD_SIZE * runtime->channels,
> - dreamcastcard->substream);
> - snd_pcm_period_elapsed(dreamcastcard->substream);
> - dreamcastcard->clicks++;
> - if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
> - dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
> - mod_timer(&dreamcastcard->timer, jiffies + 1);
> - }
> -}
> -
> -static void aica_period_elapsed(struct timer_list *t)
> -{
> - struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
> - t, timer);
> - struct snd_pcm_substream *substream = dreamcastcard->substream;
> - /*timer function - so cannot sleep */
> - int play_period;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /* Have we played out an additional period? */
> - play_period =
> - frames_to_bytes(runtime,
> - readl
> - (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
> - AICA_PERIOD_SIZE;
> - if (play_period == dreamcastcard->current_period) {
> - /* reschedule the timer */
> - mod_timer(&(dreamcastcard->timer), jiffies + 1);
> - return;
> - }
> - if (runtime->channels > 1)
> - dreamcastcard->current_period = play_period;
> - if (unlikely(dreamcastcard->dma_check == 0))
> - dreamcastcard->dma_check = 1;
> - schedule_work(&(dreamcastcard->spu_dma_work));
> -}
> -
> -static void spu_begin_dma(struct snd_pcm_substream *substream)
> -{
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /*get the queue to do the work */
> - schedule_work(&(dreamcastcard->spu_dma_work));
> - mod_timer(&dreamcastcard->timer, jiffies + 4);
> -}
> -
> -static int snd_aicapcm_pcm_open(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_pcm_runtime *runtime;
> - struct aica_channel *channel;
> - struct snd_card_aica *dreamcastcard;
> - if (!enable)
> - return -ENOENT;
> - dreamcastcard = substream->pcm->private_data;
> - channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
> - if (!channel)
> - return -ENOMEM;
> - /* set defaults for channel */
> - channel->sfmt = SM_8BIT;
> - channel->cmd = AICA_CMD_START;
> - channel->vol = dreamcastcard->master_volume;
> - channel->pan = 0x80;
> - channel->pos = 0;
> - channel->flags = 0; /* default to mono */
> - dreamcastcard->channel = channel;
> - runtime = substream->runtime;
> - runtime->hw = snd_pcm_aica_playback_hw;
> - spu_enable();
> - dreamcastcard->clicks = 0;
> - dreamcastcard->current_period = 0;
> - dreamcastcard->dma_check = 0;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_close(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - flush_work(&(dreamcastcard->spu_dma_work));
> - del_timer(&dreamcastcard->timer);
> - dreamcastcard->substream = NULL;
> - kfree(dreamcastcard->channel);
> - spu_disable();
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
> - dreamcastcard->channel->sfmt = SM_16BIT;
> - dreamcastcard->channel->freq = substream->runtime->rate;
> - dreamcastcard->substream = substream;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
> - *substream, int cmd)
> -{
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - spu_begin_dma(substream);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - aica_chn_halt();
> - break;
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
> - *substream)
> -{
> - return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
> -}
> -
> -static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
> - .open = snd_aicapcm_pcm_open,
> - .close = snd_aicapcm_pcm_close,
> - .prepare = snd_aicapcm_pcm_prepare,
> - .trigger = snd_aicapcm_pcm_trigger,
> - .pointer = snd_aicapcm_pcm_pointer,
> -};
> -
> -/* TO DO: set up to handle more than one pcm instance */
> -static int __init snd_aicapcmchip(struct snd_card_aica
> - *dreamcastcard, int pcm_index)
> -{
> - struct snd_pcm *pcm;
> - int err;
> - /* AICA has no capture ability */
> - err =
> - snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
> - &pcm);
> - if (unlikely(err < 0))
> - return err;
> - pcm->private_data = dreamcastcard;
> - strcpy(pcm->name, "AICA PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
> - &snd_aicapcm_playback_ops);
> - /* Allocate the DMA buffers */
> - snd_pcm_set_managed_buffer_all(pcm,
> - SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL,
> - AICA_BUFFER_SIZE,
> - AICA_BUFFER_SIZE);
> - return 0;
> -}
> -
> -/* Mixer controls */
> -#define aica_pcmswitch_info snd_ctl_boolean_mono_info
> -
> -static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
> - return 0;
> -}
> -
> -static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - if (ucontrol->value.integer.value[0] == 1)
> - return 0; /* TO DO: Fix me */
> - else
> - aica_chn_halt();
> - return 0;
> -}
> -
> -static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_info *uinfo)
> -{
> - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> - uinfo->count = 1;
> - uinfo->value.integer.min = 0;
> - uinfo->value.integer.max = 0xFF;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY; /* we've not yet been set up */
> - ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - unsigned int vol;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY;
> - vol = ucontrol->value.integer.value[0];
> - if (vol > 0xff)
> - return -EINVAL;
> - if (unlikely(dreamcastcard->channel->vol == vol))
> - return 0;
> - dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
> - dreamcastcard->master_volume = ucontrol->value.integer.value[0];
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - return 1;
> -}
> -
> -static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Switch",
> - .index = 0,
> - .info = aica_pcmswitch_info,
> - .get = aica_pcmswitch_get,
> - .put = aica_pcmswitch_put
> -};
> -
> -static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Volume",
> - .index = 0,
> - .info = aica_pcmvolume_info,
> - .get = aica_pcmvolume_get,
> - .put = aica_pcmvolume_put
> -};
> -
> -static int load_aica_firmware(void)
> -{
> - int err;
> - const struct firmware *fw_entry;
> - spu_reset();
> - err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
> - if (unlikely(err))
> - return err;
> - /* write firmware into memory */
> - spu_disable();
> - spu_memload(0, fw_entry->data, fw_entry->size);
> - spu_enable();
> - release_firmware(fw_entry);
> - return err;
> -}
> -
> -static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
> -{
> - int err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - return 0;
> -}
> -
> -static int snd_aica_remove(struct platform_device *devptr)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = platform_get_drvdata(devptr);
> - if (unlikely(!dreamcastcard))
> - return -ENODEV;
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return 0;
> -}
> -
> -static int snd_aica_probe(struct platform_device *devptr)
> -{
> - int err;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
> - if (unlikely(!dreamcastcard))
> - return -ENOMEM;
> - err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
> - THIS_MODULE, 0, &dreamcastcard->card);
> - if (unlikely(err < 0)) {
> - kfree(dreamcastcard);
> - return err;
> - }
> - strcpy(dreamcastcard->card->driver, "snd_aica");
> - strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
> - strcpy(dreamcastcard->card->longname,
> - "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
> - /* Prepare to use the queue */
> - INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
> - timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
> - /* Load the PCM 'chip' */
> - err = snd_aicapcmchip(dreamcastcard, 0);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Add basic controls */
> - err = add_aicamixer_controls(dreamcastcard);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Register the card with ALSA subsystem */
> - err = snd_card_register(dreamcastcard->card);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - platform_set_drvdata(devptr, dreamcastcard);
> - snd_printk
> - ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
> - return 0;
> - freedreamcast:
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return err;
> -}
> -
> -static struct platform_driver snd_aica_driver = {
> - .probe = snd_aica_probe,
> - .remove = snd_aica_remove,
> - .driver = {
> - .name = SND_AICA_DRIVER,
> - },
> -};
> -
> -static int __init aica_init(void)
> -{
> - int err;
> - err = platform_driver_register(&snd_aica_driver);
> - if (unlikely(err < 0))
> - return err;
> - pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
> - aica_memory_space, 2);
> - if (IS_ERR(pd)) {
> - platform_driver_unregister(&snd_aica_driver);
> - return PTR_ERR(pd);
> - }
> - /* Load the firmware */
> - return load_aica_firmware();
> -}
> -
> -static void __exit aica_exit(void)
> -{
> - platform_device_unregister(pd);
> - platform_driver_unregister(&snd_aica_driver);
> - /* Kill any sound still playing and reset ARM7 to safe state */
> - spu_reset();
> -}
> -
> -module_init(aica_init);
> -module_exit(aica_exit);
> diff --git a/sound/sh/aica.h b/sound/sh/aica.h
> deleted file mode 100644
> index 021b132e088e82..00000000000000
> --- a/sound/sh/aica.h
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* aica.h
> - * Header file for ALSA driver for
> - * Sega Dreamcast Yamaha AICA sound
> - * Copyright Adrian McMenamin
> - * <adrian@mcmen.demon.co.uk>
> - * 2006
> - */
> -
> -/* SPU memory and register constants etc */
> -#define G2_FIFO 0xa05f688c
> -#define SPU_MEMORY_BASE 0xA0800000
> -#define ARM_RESET_REGISTER 0xA0702C00
> -#define SPU_REGISTER_BASE 0xA0700000
> -
> -/* AICA channels stuff */
> -#define AICA_CONTROL_POINT 0xA0810000
> -#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
> -#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
> -
> -/* Command values */
> -#define AICA_CMD_KICK 0x80000000
> -#define AICA_CMD_NONE 0
> -#define AICA_CMD_START 1
> -#define AICA_CMD_STOP 2
> -#define AICA_CMD_VOL 3
> -
> -/* Sound modes */
> -#define SM_8BIT 1
> -#define SM_16BIT 0
> -#define SM_ADPCM 2
> -
> -/* Buffer and period size */
> -#define AICA_BUFFER_SIZE 0x8000
> -#define AICA_PERIOD_SIZE 0x800
> -#define AICA_PERIOD_NUMBER 16
> -
> -#define AICA_CHANNEL0_OFFSET 0x11000
> -#define AICA_CHANNEL1_OFFSET 0x21000
> -#define CHANNEL_OFFSET 0x10000
> -
> -#define AICA_DMA_CHANNEL 5
> -#define AICA_DMA_MODE 5
> -
> -#define SND_AICA_DRIVER "AICA"
> -
> -struct aica_channel {
> - uint32_t cmd; /* Command ID */
> - uint32_t pos; /* Sample position */
> - uint32_t length; /* Sample length */
> - uint32_t freq; /* Frequency */
> - uint32_t vol; /* Volume 0-255 */
> - uint32_t pan; /* Pan 0-255 */
> - uint32_t sfmt; /* Sound format */
> - uint32_t flags; /* Bit flags */
> -};
> -
> -struct snd_card_aica {
> - struct work_struct spu_dma_work;
> - struct snd_card *card;
> - struct aica_channel *channel;
> - struct snd_pcm_substream *substream;
> - int clicks;
> - int current_period;
> - struct timer_list timer;
> - int master_volume;
> - int dma_check;
> -};
> diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
> deleted file mode 100644
> index 8ebd972846acb5..00000000000000
> --- a/sound/sh/sh_dac_audio.c
> +++ /dev/null
> @@ -1,412 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * sh_dac_audio.c - SuperH DAC audio driver for ALSA
> - *
> - * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
> - *
> - * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
> - */
> -
> -#include <linux/hrtimer.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/module.h>
> -#include <sound/core.h>
> -#include <sound/initval.h>
> -#include <sound/pcm.h>
> -#include <sound/sh_dac_audio.h>
> -#include <asm/clock.h>
> -#include <asm/hd64461.h>
> -#include <mach/hp6xx.h>
> -#include <cpu/dac.h>
> -
> -MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
> -MODULE_DESCRIPTION("SuperH DAC audio driver");
> -MODULE_LICENSE("GPL");
> -
> -/* Module Parameters */
> -static int index = SNDRV_DEFAULT_IDX1;
> -static char *id = SNDRV_DEFAULT_STR1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
> -
> -/* main struct */
> -struct snd_sh_dac {
> - struct snd_card *card;
> - struct snd_pcm_substream *substream;
> - struct hrtimer hrtimer;
> - ktime_t wakeups_per_second;
> -
> - int rate;
> - int empty;
> - char *data_buffer, *buffer_begin, *buffer_end;
> - int processed; /* bytes proccesed, to compare with period_size */
> - int buffer_size;
> - struct dac_audio_pdata *pdata;
> -};
> -
> -
> -static void dac_audio_start_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -}
> -
> -static void dac_audio_stop_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_cancel(&chip->hrtimer);
> -}
> -
> -static void dac_audio_reset(struct snd_sh_dac *chip)
> -{
> - dac_audio_stop_timer(chip);
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -}
> -
> -static void dac_audio_set_rate(struct snd_sh_dac *chip)
> -{
> - chip->wakeups_per_second = 1000000000 / chip->rate;
> -}
> -
> -
> -/* PCM INTERFACE */
> -
> -static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
> - .info = (SNDRV_PCM_INFO_MMAP |
> - SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_INTERLEAVED |
> - SNDRV_PCM_INFO_HALF_DUPLEX),
> - .formats = SNDRV_PCM_FMTBIT_U8,
> - .rates = SNDRV_PCM_RATE_8000,
> - .rate_min = 8000,
> - .rate_max = 8000,
> - .channels_min = 1,
> - .channels_max = 1,
> - .buffer_bytes_max = (48*1024),
> - .period_bytes_min = 1,
> - .period_bytes_max = (48*1024),
> - .periods_min = 1,
> - .periods_max = 1024,
> -};
> -
> -static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = substream->runtime;
> -
> - runtime->hw = snd_sh_dac_pcm_hw;
> -
> - chip->substream = substream;
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -
> - chip->pdata->start(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - chip->substream = NULL;
> -
> - dac_audio_stop_timer(chip);
> - chip->pdata->stop(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> -
> - chip->buffer_size = runtime->buffer_size;
> - memset(chip->data_buffer, 0, chip->pdata->buffer_size);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - dac_audio_start_timer(chip);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> - dac_audio_stop_timer(chip);
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void __user *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - if (copy_from_user_toio(chip->data_buffer + pos, src, count))
> - return -EFAULT;
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memcpy_toio(chip->data_buffer + pos, src, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memset_io(chip->data_buffer + pos, 0, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static
> -snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - int pointer = chip->buffer_begin - chip->data_buffer;
> -
> - return pointer;
> -}
> -
> -/* pcm ops */
> -static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
> - .open = snd_sh_dac_pcm_open,
> - .close = snd_sh_dac_pcm_close,
> - .prepare = snd_sh_dac_pcm_prepare,
> - .trigger = snd_sh_dac_pcm_trigger,
> - .pointer = snd_sh_dac_pcm_pointer,
> - .copy_user = snd_sh_dac_pcm_copy,
> - .copy_kernel = snd_sh_dac_pcm_copy_kernel,
> - .fill_silence = snd_sh_dac_pcm_silence,
> - .mmap = snd_pcm_lib_mmap_iomem,
> -};
> -
> -static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
> -{
> - int err;
> - struct snd_pcm *pcm;
> -
> - /* device should be always 0 for us */
> - err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
> - if (err < 0)
> - return err;
> -
> - pcm->private_data = chip;
> - strcpy(pcm->name, "SH_DAC PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
> -
> - /* buffer size=48K */
> - snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL, 48 * 1024, 48 * 1024);
> -
> - return 0;
> -}
> -/* END OF PCM INTERFACE */
> -
> -
> -/* driver .remove -- destructor */
> -static int snd_sh_dac_remove(struct platform_device *devptr)
> -{
> - snd_card_free(platform_get_drvdata(devptr));
> - return 0;
> -}
> -
> -/* free -- it has been defined by create */
> -static int snd_sh_dac_free(struct snd_sh_dac *chip)
> -{
> - /* release the data */
> - kfree(chip->data_buffer);
> - kfree(chip);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_dev_free(struct snd_device *device)
> -{
> - struct snd_sh_dac *chip = device->device_data;
> -
> - return snd_sh_dac_free(chip);
> -}
> -
> -static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
> -{
> - struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
> - hrtimer);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> - ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
> -
> - if (!chip->empty) {
> - sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
> - chip->buffer_begin++;
> -
> - chip->processed++;
> - if (chip->processed >= b_ps) {
> - chip->processed -= b_ps;
> - snd_pcm_period_elapsed(chip->substream);
> - }
> -
> - if (chip->buffer_begin == (chip->data_buffer +
> - chip->buffer_size - 1))
> - chip->buffer_begin = chip->data_buffer;
> -
> - if (chip->buffer_begin == chip->buffer_end)
> - chip->empty = 1;
> -
> - }
> -
> - if (!chip->empty)
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -
> - return HRTIMER_NORESTART;
> -}
> -
> -/* create -- chip-specific constructor for the cards components */
> -static int snd_sh_dac_create(struct snd_card *card,
> - struct platform_device *devptr,
> - struct snd_sh_dac **rchip)
> -{
> - struct snd_sh_dac *chip;
> - int err;
> -
> - static const struct snd_device_ops ops = {
> - .dev_free = snd_sh_dac_dev_free,
> - };
> -
> - *rchip = NULL;
> -
> - chip = kzalloc(sizeof(*chip), GFP_KERNEL);
> - if (chip == NULL)
> - return -ENOMEM;
> -
> - chip->card = card;
> -
> - hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> - chip->hrtimer.function = sh_dac_audio_timer;
> -
> - dac_audio_reset(chip);
> - chip->rate = 8000;
> - dac_audio_set_rate(chip);
> -
> - chip->pdata = devptr->dev.platform_data;
> -
> - chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
> - if (chip->data_buffer == NULL) {
> - kfree(chip);
> - return -ENOMEM;
> - }
> -
> - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
> - if (err < 0) {
> - snd_sh_dac_free(chip);
> - return err;
> - }
> -
> - *rchip = chip;
> -
> - return 0;
> -}
> -
> -/* driver .probe -- constructor */
> -static int snd_sh_dac_probe(struct platform_device *devptr)
> -{
> - struct snd_sh_dac *chip;
> - struct snd_card *card;
> - int err;
> -
> - err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
> - if (err < 0) {
> - snd_printk(KERN_ERR "cannot allocate the card\n");
> - return err;
> - }
> -
> - err = snd_sh_dac_create(card, devptr, &chip);
> - if (err < 0)
> - goto probe_error;
> -
> - err = snd_sh_dac_pcm(chip, 0);
> - if (err < 0)
> - goto probe_error;
> -
> - strcpy(card->driver, "snd_sh_dac");
> - strcpy(card->shortname, "SuperH DAC audio driver");
> - printk(KERN_INFO "%s %s", card->longname, card->shortname);
> -
> - err = snd_card_register(card);
> - if (err < 0)
> - goto probe_error;
> -
> - snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
> -
> - platform_set_drvdata(devptr, card);
> - return 0;
> -
> -probe_error:
> - snd_card_free(card);
> - return err;
> -}
> -
> -/*
> - * "driver" definition
> - */
> -static struct platform_driver sh_dac_driver = {
> - .probe = snd_sh_dac_probe,
> - .remove = snd_sh_dac_remove,
> - .driver = {
> - .name = "dac_audio",
> - },
> -};
> -
> -module_platform_driver(sh_dac_driver);
> --
> 2.39.0
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 04/22] sound: remove sound/sh
@ 2023-01-13 16:18 ` Takashi Iwai
0 siblings, 0 replies; 263+ messages in thread
From: Takashi Iwai @ 2023-01-13 16:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
On Fri, 13 Jan 2023 07:23:21 +0100,
Christoph Hellwig wrote:
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Supposed you take in your tree:
Acked-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
> ---
> sound/Kconfig | 2 -
> sound/Makefile | 2 +-
> sound/sh/Kconfig | 32 --
> sound/sh/Makefile | 11 -
> sound/sh/aica.c | 628 ----------------------------------------
> sound/sh/aica.h | 68 -----
> sound/sh/sh_dac_audio.c | 412 --------------------------
> 7 files changed, 1 insertion(+), 1154 deletions(-)
> delete mode 100644 sound/sh/Kconfig
> delete mode 100644 sound/sh/Makefile
> delete mode 100644 sound/sh/aica.c
> delete mode 100644 sound/sh/aica.h
> delete mode 100644 sound/sh/sh_dac_audio.c
>
> diff --git a/sound/Kconfig b/sound/Kconfig
> index e56d96d2b11cae..14361bb428baa1 100644
> --- a/sound/Kconfig
> +++ b/sound/Kconfig
> @@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
>
> source "sound/mips/Kconfig"
>
> -source "sound/sh/Kconfig"
> -
> # the following will depend on the order of config.
> # here assuming USB is defined before ALSA
> source "sound/usb/Kconfig"
> diff --git a/sound/Makefile b/sound/Makefile
> index 04ef04b1168f39..bb4b8806321c67 100644
> --- a/sound/Makefile
> +++ b/sound/Makefile
> @@ -4,7 +4,7 @@
>
> obj-$(CONFIG_SOUND) += soundcore.o
> obj-$(CONFIG_DMASOUND) += oss/dmasound/
> -obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
> +obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
> firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
> virtio/
> obj-$(CONFIG_SND_AOA) += aoa/
> diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
> deleted file mode 100644
> index b75fbb3236a7b9..00000000000000
> --- a/sound/sh/Kconfig
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -# ALSA SH drivers
> -
> -menuconfig SND_SUPERH
> - bool "SUPERH sound devices"
> - depends on SUPERH
> - default y
> - help
> - Support for sound devices specific to SUPERH architectures.
> - Drivers that are implemented on ASoC can be found in
> - "ALSA for SoC audio support" section.
> -
> -if SND_SUPERH
> -
> -config SND_AICA
> - tristate "Dreamcast Yamaha AICA sound"
> - depends on SH_DREAMCAST
> - select SND_PCM
> - select G2_DMA
> - help
> - ALSA Sound driver for the SEGA Dreamcast console.
> -
> -config SND_SH_DAC_AUDIO
> - tristate "SuperH DAC audio support"
> - depends on SND
> - depends on CPU_SH3 && HIGH_RES_TIMERS
> - select SND_PCM
> - help
> - Say Y here to include support for the on-chip DAC.
> -
> -endif # SND_SUPERH
> -
> diff --git a/sound/sh/Makefile b/sound/sh/Makefile
> deleted file mode 100644
> index c0bbc500c17c73..00000000000000
> --- a/sound/sh/Makefile
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -#
> -# Makefile for ALSA
> -#
> -
> -snd-aica-objs := aica.o
> -snd-sh_dac_audio-objs := sh_dac_audio.o
> -
> -# Toplevel Module Dependency
> -obj-$(CONFIG_SND_AICA) += snd-aica.o
> -obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
> diff --git a/sound/sh/aica.c b/sound/sh/aica.c
> deleted file mode 100644
> index 6e9d6bd67369af..00000000000000
> --- a/sound/sh/aica.c
> +++ /dev/null
> @@ -1,628 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> -*
> -* Copyright Adrian McMenamin 2005, 2006, 2007
> -* <adrian@mcmen.demon.co.uk>
> -* Requires firmware (BSD licenced) available from:
> -* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
> -* or the maintainer
> -*/
> -
> -#include <linux/init.h>
> -#include <linux/jiffies.h>
> -#include <linux/slab.h>
> -#include <linux/time.h>
> -#include <linux/wait.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/firmware.h>
> -#include <linux/timer.h>
> -#include <linux/delay.h>
> -#include <linux/workqueue.h>
> -#include <linux/io.h>
> -#include <sound/core.h>
> -#include <sound/control.h>
> -#include <sound/pcm.h>
> -#include <sound/initval.h>
> -#include <sound/info.h>
> -#include <asm/dma.h>
> -#include <mach/sysasic.h>
> -#include "aica.h"
> -
> -MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
> -MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
> -MODULE_LICENSE("GPL");
> -MODULE_FIRMWARE("aica_firmware.bin");
> -
> -/* module parameters */
> -#define CARD_NAME "AICA"
> -static int index = -1;
> -static char *id;
> -static bool enable = 1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
> -module_param(enable, bool, 0644);
> -MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
> -
> -/* Simple platform device */
> -static struct platform_device *pd;
> -static struct resource aica_memory_space[2] = {
> - {
> - .name = "AICA ARM CONTROL",
> - .start = ARM_RESET_REGISTER,
> - .flags = IORESOURCE_MEM,
> - .end = ARM_RESET_REGISTER + 3,
> - },
> - {
> - .name = "AICA Sound RAM",
> - .start = SPU_MEMORY_BASE,
> - .flags = IORESOURCE_MEM,
> - .end = SPU_MEMORY_BASE + 0x200000 - 1,
> - },
> -};
> -
> -/* SPU specific functions */
> -/* spu_write_wait - wait for G2-SH FIFO to clear */
> -static void spu_write_wait(void)
> -{
> - int time_count;
> - time_count = 0;
> - while (1) {
> - if (!(readl(G2_FIFO) & 0x11))
> - break;
> - /* To ensure hardware failure doesn't wedge kernel */
> - time_count++;
> - if (time_count > 0x10000) {
> - snd_printk
> - ("WARNING: G2 FIFO appears to be blocked.\n");
> - break;
> - }
> - }
> -}
> -
> -/* spu_memset - write to memory in SPU address space */
> -static void spu_memset(u32 toi, u32 what, int length)
> -{
> - int i;
> - unsigned long flags;
> - if (snd_BUG_ON(length % 4))
> - return;
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(what, toi + SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - toi++;
> - }
> -}
> -
> -/* spu_memload - write to SPU address space */
> -static void spu_memload(u32 toi, const void *from, int length)
> -{
> - unsigned long flags;
> - const u32 *froml = from;
> - u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
> - int i;
> - u32 val;
> - length = DIV_ROUND_UP(length, 4);
> - spu_write_wait();
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - val = *froml;
> - local_irq_save(flags);
> - writel(val, to);
> - local_irq_restore(flags);
> - froml++;
> - to++;
> - }
> -}
> -
> -/* spu_disable - set spu registers to stop sound output */
> -static void spu_disable(void)
> -{
> - int i;
> - unsigned long flags;
> - u32 regval;
> - spu_write_wait();
> - regval = readl(ARM_RESET_REGISTER);
> - regval |= 1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> - for (i = 0; i < 64; i++) {
> - spu_write_wait();
> - regval = readl(SPU_REGISTER_BASE + (i * 0x80));
> - regval = (regval & ~0x4000) | 0x8000;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, SPU_REGISTER_BASE + (i * 0x80));
> - local_irq_restore(flags);
> - }
> -}
> -
> -/* spu_enable - set spu registers to enable sound output */
> -static void spu_enable(void)
> -{
> - unsigned long flags;
> - u32 regval = readl(ARM_RESET_REGISTER);
> - regval &= ~1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> -}
> -
> -/*
> - * Halt the sound processor, clear the memory,
> - * load some default ARM7 code, and then restart ARM7
> -*/
> -static void spu_reset(void)
> -{
> - unsigned long flags;
> - spu_disable();
> - spu_memset(0, 0, 0x200000 / 4);
> - /* Put ARM7 in endless loop */
> - local_irq_save(flags);
> - __raw_writel(0xea000002, SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - spu_enable();
> -}
> -
> -/* aica_chn_start - write to spu to start playback */
> -static void aica_chn_start(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* aica_chn_halt - write to spu to halt playback */
> -static void aica_chn_halt(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* ALSA code below */
> -static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
> - .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
> - .formats =
> - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
> - SNDRV_PCM_FMTBIT_IMA_ADPCM),
> - .rates = SNDRV_PCM_RATE_8000_48000,
> - .rate_min = 8000,
> - .rate_max = 48000,
> - .channels_min = 1,
> - .channels_max = 2,
> - .buffer_bytes_max = AICA_BUFFER_SIZE,
> - .period_bytes_min = AICA_PERIOD_SIZE,
> - .period_bytes_max = AICA_PERIOD_SIZE,
> - .periods_min = AICA_PERIOD_NUMBER,
> - .periods_max = AICA_PERIOD_NUMBER,
> -};
> -
> -static int aica_dma_transfer(int channels, int buffer_size,
> - struct snd_pcm_substream *substream)
> -{
> - int q, err, period_offset;
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - unsigned long flags;
> - err = 0;
> - dreamcastcard = substream->pcm->private_data;
> - period_offset = dreamcastcard->clicks;
> - period_offset %= (AICA_PERIOD_NUMBER / channels);
> - runtime = substream->runtime;
> - for (q = 0; q < channels; q++) {
> - local_irq_save(flags);
> - err = dma_xfer(AICA_DMA_CHANNEL,
> - (unsigned long) (runtime->dma_area +
> - (AICA_BUFFER_SIZE * q) /
> - channels +
> - AICA_PERIOD_SIZE *
> - period_offset),
> - AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
> - AICA_PERIOD_SIZE * period_offset,
> - buffer_size / channels, AICA_DMA_MODE);
> - if (unlikely(err < 0)) {
> - local_irq_restore(flags);
> - break;
> - }
> - dma_wait_for_completion(AICA_DMA_CHANNEL);
> - local_irq_restore(flags);
> - }
> - return err;
> -}
> -
> -static void startup_aica(struct snd_card_aica *dreamcastcard)
> -{
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - aica_chn_start();
> -}
> -
> -static void run_spu_dma(struct work_struct *work)
> -{
> - int buffer_size;
> - struct snd_pcm_runtime *runtime;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard =
> - container_of(work, struct snd_card_aica, spu_dma_work);
> - runtime = dreamcastcard->substream->runtime;
> - if (unlikely(dreamcastcard->dma_check == 0)) {
> - buffer_size =
> - frames_to_bytes(runtime, runtime->buffer_size);
> - if (runtime->channels > 1)
> - dreamcastcard->channel->flags |= 0x01;
> - aica_dma_transfer(runtime->channels, buffer_size,
> - dreamcastcard->substream);
> - startup_aica(dreamcastcard);
> - dreamcastcard->clicks =
> - buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
> - return;
> - } else {
> - aica_dma_transfer(runtime->channels,
> - AICA_PERIOD_SIZE * runtime->channels,
> - dreamcastcard->substream);
> - snd_pcm_period_elapsed(dreamcastcard->substream);
> - dreamcastcard->clicks++;
> - if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
> - dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
> - mod_timer(&dreamcastcard->timer, jiffies + 1);
> - }
> -}
> -
> -static void aica_period_elapsed(struct timer_list *t)
> -{
> - struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
> - t, timer);
> - struct snd_pcm_substream *substream = dreamcastcard->substream;
> - /*timer function - so cannot sleep */
> - int play_period;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /* Have we played out an additional period? */
> - play_period =
> - frames_to_bytes(runtime,
> - readl
> - (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
> - AICA_PERIOD_SIZE;
> - if (play_period == dreamcastcard->current_period) {
> - /* reschedule the timer */
> - mod_timer(&(dreamcastcard->timer), jiffies + 1);
> - return;
> - }
> - if (runtime->channels > 1)
> - dreamcastcard->current_period = play_period;
> - if (unlikely(dreamcastcard->dma_check == 0))
> - dreamcastcard->dma_check = 1;
> - schedule_work(&(dreamcastcard->spu_dma_work));
> -}
> -
> -static void spu_begin_dma(struct snd_pcm_substream *substream)
> -{
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /*get the queue to do the work */
> - schedule_work(&(dreamcastcard->spu_dma_work));
> - mod_timer(&dreamcastcard->timer, jiffies + 4);
> -}
> -
> -static int snd_aicapcm_pcm_open(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_pcm_runtime *runtime;
> - struct aica_channel *channel;
> - struct snd_card_aica *dreamcastcard;
> - if (!enable)
> - return -ENOENT;
> - dreamcastcard = substream->pcm->private_data;
> - channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
> - if (!channel)
> - return -ENOMEM;
> - /* set defaults for channel */
> - channel->sfmt = SM_8BIT;
> - channel->cmd = AICA_CMD_START;
> - channel->vol = dreamcastcard->master_volume;
> - channel->pan = 0x80;
> - channel->pos = 0;
> - channel->flags = 0; /* default to mono */
> - dreamcastcard->channel = channel;
> - runtime = substream->runtime;
> - runtime->hw = snd_pcm_aica_playback_hw;
> - spu_enable();
> - dreamcastcard->clicks = 0;
> - dreamcastcard->current_period = 0;
> - dreamcastcard->dma_check = 0;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_close(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - flush_work(&(dreamcastcard->spu_dma_work));
> - del_timer(&dreamcastcard->timer);
> - dreamcastcard->substream = NULL;
> - kfree(dreamcastcard->channel);
> - spu_disable();
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
> - dreamcastcard->channel->sfmt = SM_16BIT;
> - dreamcastcard->channel->freq = substream->runtime->rate;
> - dreamcastcard->substream = substream;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
> - *substream, int cmd)
> -{
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - spu_begin_dma(substream);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - aica_chn_halt();
> - break;
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
> - *substream)
> -{
> - return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
> -}
> -
> -static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
> - .open = snd_aicapcm_pcm_open,
> - .close = snd_aicapcm_pcm_close,
> - .prepare = snd_aicapcm_pcm_prepare,
> - .trigger = snd_aicapcm_pcm_trigger,
> - .pointer = snd_aicapcm_pcm_pointer,
> -};
> -
> -/* TO DO: set up to handle more than one pcm instance */
> -static int __init snd_aicapcmchip(struct snd_card_aica
> - *dreamcastcard, int pcm_index)
> -{
> - struct snd_pcm *pcm;
> - int err;
> - /* AICA has no capture ability */
> - err =
> - snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
> - &pcm);
> - if (unlikely(err < 0))
> - return err;
> - pcm->private_data = dreamcastcard;
> - strcpy(pcm->name, "AICA PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
> - &snd_aicapcm_playback_ops);
> - /* Allocate the DMA buffers */
> - snd_pcm_set_managed_buffer_all(pcm,
> - SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL,
> - AICA_BUFFER_SIZE,
> - AICA_BUFFER_SIZE);
> - return 0;
> -}
> -
> -/* Mixer controls */
> -#define aica_pcmswitch_info snd_ctl_boolean_mono_info
> -
> -static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
> - return 0;
> -}
> -
> -static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - if (ucontrol->value.integer.value[0] == 1)
> - return 0; /* TO DO: Fix me */
> - else
> - aica_chn_halt();
> - return 0;
> -}
> -
> -static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_info *uinfo)
> -{
> - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> - uinfo->count = 1;
> - uinfo->value.integer.min = 0;
> - uinfo->value.integer.max = 0xFF;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY; /* we've not yet been set up */
> - ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - unsigned int vol;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY;
> - vol = ucontrol->value.integer.value[0];
> - if (vol > 0xff)
> - return -EINVAL;
> - if (unlikely(dreamcastcard->channel->vol == vol))
> - return 0;
> - dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
> - dreamcastcard->master_volume = ucontrol->value.integer.value[0];
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - return 1;
> -}
> -
> -static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Switch",
> - .index = 0,
> - .info = aica_pcmswitch_info,
> - .get = aica_pcmswitch_get,
> - .put = aica_pcmswitch_put
> -};
> -
> -static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Volume",
> - .index = 0,
> - .info = aica_pcmvolume_info,
> - .get = aica_pcmvolume_get,
> - .put = aica_pcmvolume_put
> -};
> -
> -static int load_aica_firmware(void)
> -{
> - int err;
> - const struct firmware *fw_entry;
> - spu_reset();
> - err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
> - if (unlikely(err))
> - return err;
> - /* write firmware into memory */
> - spu_disable();
> - spu_memload(0, fw_entry->data, fw_entry->size);
> - spu_enable();
> - release_firmware(fw_entry);
> - return err;
> -}
> -
> -static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
> -{
> - int err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - return 0;
> -}
> -
> -static int snd_aica_remove(struct platform_device *devptr)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = platform_get_drvdata(devptr);
> - if (unlikely(!dreamcastcard))
> - return -ENODEV;
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return 0;
> -}
> -
> -static int snd_aica_probe(struct platform_device *devptr)
> -{
> - int err;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
> - if (unlikely(!dreamcastcard))
> - return -ENOMEM;
> - err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
> - THIS_MODULE, 0, &dreamcastcard->card);
> - if (unlikely(err < 0)) {
> - kfree(dreamcastcard);
> - return err;
> - }
> - strcpy(dreamcastcard->card->driver, "snd_aica");
> - strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
> - strcpy(dreamcastcard->card->longname,
> - "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
> - /* Prepare to use the queue */
> - INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
> - timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
> - /* Load the PCM 'chip' */
> - err = snd_aicapcmchip(dreamcastcard, 0);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Add basic controls */
> - err = add_aicamixer_controls(dreamcastcard);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Register the card with ALSA subsystem */
> - err = snd_card_register(dreamcastcard->card);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - platform_set_drvdata(devptr, dreamcastcard);
> - snd_printk
> - ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
> - return 0;
> - freedreamcast:
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return err;
> -}
> -
> -static struct platform_driver snd_aica_driver = {
> - .probe = snd_aica_probe,
> - .remove = snd_aica_remove,
> - .driver = {
> - .name = SND_AICA_DRIVER,
> - },
> -};
> -
> -static int __init aica_init(void)
> -{
> - int err;
> - err = platform_driver_register(&snd_aica_driver);
> - if (unlikely(err < 0))
> - return err;
> - pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
> - aica_memory_space, 2);
> - if (IS_ERR(pd)) {
> - platform_driver_unregister(&snd_aica_driver);
> - return PTR_ERR(pd);
> - }
> - /* Load the firmware */
> - return load_aica_firmware();
> -}
> -
> -static void __exit aica_exit(void)
> -{
> - platform_device_unregister(pd);
> - platform_driver_unregister(&snd_aica_driver);
> - /* Kill any sound still playing and reset ARM7 to safe state */
> - spu_reset();
> -}
> -
> -module_init(aica_init);
> -module_exit(aica_exit);
> diff --git a/sound/sh/aica.h b/sound/sh/aica.h
> deleted file mode 100644
> index 021b132e088e82..00000000000000
> --- a/sound/sh/aica.h
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* aica.h
> - * Header file for ALSA driver for
> - * Sega Dreamcast Yamaha AICA sound
> - * Copyright Adrian McMenamin
> - * <adrian@mcmen.demon.co.uk>
> - * 2006
> - */
> -
> -/* SPU memory and register constants etc */
> -#define G2_FIFO 0xa05f688c
> -#define SPU_MEMORY_BASE 0xA0800000
> -#define ARM_RESET_REGISTER 0xA0702C00
> -#define SPU_REGISTER_BASE 0xA0700000
> -
> -/* AICA channels stuff */
> -#define AICA_CONTROL_POINT 0xA0810000
> -#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
> -#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
> -
> -/* Command values */
> -#define AICA_CMD_KICK 0x80000000
> -#define AICA_CMD_NONE 0
> -#define AICA_CMD_START 1
> -#define AICA_CMD_STOP 2
> -#define AICA_CMD_VOL 3
> -
> -/* Sound modes */
> -#define SM_8BIT 1
> -#define SM_16BIT 0
> -#define SM_ADPCM 2
> -
> -/* Buffer and period size */
> -#define AICA_BUFFER_SIZE 0x8000
> -#define AICA_PERIOD_SIZE 0x800
> -#define AICA_PERIOD_NUMBER 16
> -
> -#define AICA_CHANNEL0_OFFSET 0x11000
> -#define AICA_CHANNEL1_OFFSET 0x21000
> -#define CHANNEL_OFFSET 0x10000
> -
> -#define AICA_DMA_CHANNEL 5
> -#define AICA_DMA_MODE 5
> -
> -#define SND_AICA_DRIVER "AICA"
> -
> -struct aica_channel {
> - uint32_t cmd; /* Command ID */
> - uint32_t pos; /* Sample position */
> - uint32_t length; /* Sample length */
> - uint32_t freq; /* Frequency */
> - uint32_t vol; /* Volume 0-255 */
> - uint32_t pan; /* Pan 0-255 */
> - uint32_t sfmt; /* Sound format */
> - uint32_t flags; /* Bit flags */
> -};
> -
> -struct snd_card_aica {
> - struct work_struct spu_dma_work;
> - struct snd_card *card;
> - struct aica_channel *channel;
> - struct snd_pcm_substream *substream;
> - int clicks;
> - int current_period;
> - struct timer_list timer;
> - int master_volume;
> - int dma_check;
> -};
> diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
> deleted file mode 100644
> index 8ebd972846acb5..00000000000000
> --- a/sound/sh/sh_dac_audio.c
> +++ /dev/null
> @@ -1,412 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * sh_dac_audio.c - SuperH DAC audio driver for ALSA
> - *
> - * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
> - *
> - * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
> - */
> -
> -#include <linux/hrtimer.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/module.h>
> -#include <sound/core.h>
> -#include <sound/initval.h>
> -#include <sound/pcm.h>
> -#include <sound/sh_dac_audio.h>
> -#include <asm/clock.h>
> -#include <asm/hd64461.h>
> -#include <mach/hp6xx.h>
> -#include <cpu/dac.h>
> -
> -MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
> -MODULE_DESCRIPTION("SuperH DAC audio driver");
> -MODULE_LICENSE("GPL");
> -
> -/* Module Parameters */
> -static int index = SNDRV_DEFAULT_IDX1;
> -static char *id = SNDRV_DEFAULT_STR1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
> -
> -/* main struct */
> -struct snd_sh_dac {
> - struct snd_card *card;
> - struct snd_pcm_substream *substream;
> - struct hrtimer hrtimer;
> - ktime_t wakeups_per_second;
> -
> - int rate;
> - int empty;
> - char *data_buffer, *buffer_begin, *buffer_end;
> - int processed; /* bytes proccesed, to compare with period_size */
> - int buffer_size;
> - struct dac_audio_pdata *pdata;
> -};
> -
> -
> -static void dac_audio_start_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -}
> -
> -static void dac_audio_stop_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_cancel(&chip->hrtimer);
> -}
> -
> -static void dac_audio_reset(struct snd_sh_dac *chip)
> -{
> - dac_audio_stop_timer(chip);
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -}
> -
> -static void dac_audio_set_rate(struct snd_sh_dac *chip)
> -{
> - chip->wakeups_per_second = 1000000000 / chip->rate;
> -}
> -
> -
> -/* PCM INTERFACE */
> -
> -static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
> - .info = (SNDRV_PCM_INFO_MMAP |
> - SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_INTERLEAVED |
> - SNDRV_PCM_INFO_HALF_DUPLEX),
> - .formats = SNDRV_PCM_FMTBIT_U8,
> - .rates = SNDRV_PCM_RATE_8000,
> - .rate_min = 8000,
> - .rate_max = 8000,
> - .channels_min = 1,
> - .channels_max = 1,
> - .buffer_bytes_max = (48*1024),
> - .period_bytes_min = 1,
> - .period_bytes_max = (48*1024),
> - .periods_min = 1,
> - .periods_max = 1024,
> -};
> -
> -static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = substream->runtime;
> -
> - runtime->hw = snd_sh_dac_pcm_hw;
> -
> - chip->substream = substream;
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -
> - chip->pdata->start(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - chip->substream = NULL;
> -
> - dac_audio_stop_timer(chip);
> - chip->pdata->stop(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> -
> - chip->buffer_size = runtime->buffer_size;
> - memset(chip->data_buffer, 0, chip->pdata->buffer_size);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - dac_audio_start_timer(chip);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> - dac_audio_stop_timer(chip);
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void __user *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - if (copy_from_user_toio(chip->data_buffer + pos, src, count))
> - return -EFAULT;
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memcpy_toio(chip->data_buffer + pos, src, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memset_io(chip->data_buffer + pos, 0, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static
> -snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - int pointer = chip->buffer_begin - chip->data_buffer;
> -
> - return pointer;
> -}
> -
> -/* pcm ops */
> -static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
> - .open = snd_sh_dac_pcm_open,
> - .close = snd_sh_dac_pcm_close,
> - .prepare = snd_sh_dac_pcm_prepare,
> - .trigger = snd_sh_dac_pcm_trigger,
> - .pointer = snd_sh_dac_pcm_pointer,
> - .copy_user = snd_sh_dac_pcm_copy,
> - .copy_kernel = snd_sh_dac_pcm_copy_kernel,
> - .fill_silence = snd_sh_dac_pcm_silence,
> - .mmap = snd_pcm_lib_mmap_iomem,
> -};
> -
> -static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
> -{
> - int err;
> - struct snd_pcm *pcm;
> -
> - /* device should be always 0 for us */
> - err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
> - if (err < 0)
> - return err;
> -
> - pcm->private_data = chip;
> - strcpy(pcm->name, "SH_DAC PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
> -
> - /* buffer size=48K */
> - snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL, 48 * 1024, 48 * 1024);
> -
> - return 0;
> -}
> -/* END OF PCM INTERFACE */
> -
> -
> -/* driver .remove -- destructor */
> -static int snd_sh_dac_remove(struct platform_device *devptr)
> -{
> - snd_card_free(platform_get_drvdata(devptr));
> - return 0;
> -}
> -
> -/* free -- it has been defined by create */
> -static int snd_sh_dac_free(struct snd_sh_dac *chip)
> -{
> - /* release the data */
> - kfree(chip->data_buffer);
> - kfree(chip);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_dev_free(struct snd_device *device)
> -{
> - struct snd_sh_dac *chip = device->device_data;
> -
> - return snd_sh_dac_free(chip);
> -}
> -
> -static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
> -{
> - struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
> - hrtimer);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> - ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
> -
> - if (!chip->empty) {
> - sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
> - chip->buffer_begin++;
> -
> - chip->processed++;
> - if (chip->processed >= b_ps) {
> - chip->processed -= b_ps;
> - snd_pcm_period_elapsed(chip->substream);
> - }
> -
> - if (chip->buffer_begin == (chip->data_buffer +
> - chip->buffer_size - 1))
> - chip->buffer_begin = chip->data_buffer;
> -
> - if (chip->buffer_begin == chip->buffer_end)
> - chip->empty = 1;
> -
> - }
> -
> - if (!chip->empty)
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -
> - return HRTIMER_NORESTART;
> -}
> -
> -/* create -- chip-specific constructor for the cards components */
> -static int snd_sh_dac_create(struct snd_card *card,
> - struct platform_device *devptr,
> - struct snd_sh_dac **rchip)
> -{
> - struct snd_sh_dac *chip;
> - int err;
> -
> - static const struct snd_device_ops ops = {
> - .dev_free = snd_sh_dac_dev_free,
> - };
> -
> - *rchip = NULL;
> -
> - chip = kzalloc(sizeof(*chip), GFP_KERNEL);
> - if (chip == NULL)
> - return -ENOMEM;
> -
> - chip->card = card;
> -
> - hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> - chip->hrtimer.function = sh_dac_audio_timer;
> -
> - dac_audio_reset(chip);
> - chip->rate = 8000;
> - dac_audio_set_rate(chip);
> -
> - chip->pdata = devptr->dev.platform_data;
> -
> - chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
> - if (chip->data_buffer == NULL) {
> - kfree(chip);
> - return -ENOMEM;
> - }
> -
> - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
> - if (err < 0) {
> - snd_sh_dac_free(chip);
> - return err;
> - }
> -
> - *rchip = chip;
> -
> - return 0;
> -}
> -
> -/* driver .probe -- constructor */
> -static int snd_sh_dac_probe(struct platform_device *devptr)
> -{
> - struct snd_sh_dac *chip;
> - struct snd_card *card;
> - int err;
> -
> - err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
> - if (err < 0) {
> - snd_printk(KERN_ERR "cannot allocate the card\n");
> - return err;
> - }
> -
> - err = snd_sh_dac_create(card, devptr, &chip);
> - if (err < 0)
> - goto probe_error;
> -
> - err = snd_sh_dac_pcm(chip, 0);
> - if (err < 0)
> - goto probe_error;
> -
> - strcpy(card->driver, "snd_sh_dac");
> - strcpy(card->shortname, "SuperH DAC audio driver");
> - printk(KERN_INFO "%s %s", card->longname, card->shortname);
> -
> - err = snd_card_register(card);
> - if (err < 0)
> - goto probe_error;
> -
> - snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
> -
> - platform_set_drvdata(devptr, card);
> - return 0;
> -
> -probe_error:
> - snd_card_free(card);
> - return err;
> -}
> -
> -/*
> - * "driver" definition
> - */
> -static struct platform_driver sh_dac_driver = {
> - .probe = snd_sh_dac_probe,
> - .remove = snd_sh_dac_remove,
> - .driver = {
> - .name = "dac_audio",
> - },
> -};
> -
> -module_platform_driver(sh_dac_driver);
> --
> 2.39.0
>
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 04/22] sound: remove sound/sh
@ 2023-01-13 16:18 ` Takashi Iwai
0 siblings, 0 replies; 263+ messages in thread
From: Takashi Iwai @ 2023-01-13 16:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, Laurent Pinchart, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio, linux-rtc,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-i2c
On Fri, 13 Jan 2023 07:23:21 +0100,
Christoph Hellwig wrote:
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Supposed you take in your tree:
Acked-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
> ---
> sound/Kconfig | 2 -
> sound/Makefile | 2 +-
> sound/sh/Kconfig | 32 --
> sound/sh/Makefile | 11 -
> sound/sh/aica.c | 628 ----------------------------------------
> sound/sh/aica.h | 68 -----
> sound/sh/sh_dac_audio.c | 412 --------------------------
> 7 files changed, 1 insertion(+), 1154 deletions(-)
> delete mode 100644 sound/sh/Kconfig
> delete mode 100644 sound/sh/Makefile
> delete mode 100644 sound/sh/aica.c
> delete mode 100644 sound/sh/aica.h
> delete mode 100644 sound/sh/sh_dac_audio.c
>
> diff --git a/sound/Kconfig b/sound/Kconfig
> index e56d96d2b11cae..14361bb428baa1 100644
> --- a/sound/Kconfig
> +++ b/sound/Kconfig
> @@ -75,8 +75,6 @@ source "sound/spi/Kconfig"
>
> source "sound/mips/Kconfig"
>
> -source "sound/sh/Kconfig"
> -
> # the following will depend on the order of config.
> # here assuming USB is defined before ALSA
> source "sound/usb/Kconfig"
> diff --git a/sound/Makefile b/sound/Makefile
> index 04ef04b1168f39..bb4b8806321c67 100644
> --- a/sound/Makefile
> +++ b/sound/Makefile
> @@ -4,7 +4,7 @@
>
> obj-$(CONFIG_SOUND) += soundcore.o
> obj-$(CONFIG_DMASOUND) += oss/dmasound/
> -obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
> +obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ \
> firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ xen/ \
> virtio/
> obj-$(CONFIG_SND_AOA) += aoa/
> diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
> deleted file mode 100644
> index b75fbb3236a7b9..00000000000000
> --- a/sound/sh/Kconfig
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -# ALSA SH drivers
> -
> -menuconfig SND_SUPERH
> - bool "SUPERH sound devices"
> - depends on SUPERH
> - default y
> - help
> - Support for sound devices specific to SUPERH architectures.
> - Drivers that are implemented on ASoC can be found in
> - "ALSA for SoC audio support" section.
> -
> -if SND_SUPERH
> -
> -config SND_AICA
> - tristate "Dreamcast Yamaha AICA sound"
> - depends on SH_DREAMCAST
> - select SND_PCM
> - select G2_DMA
> - help
> - ALSA Sound driver for the SEGA Dreamcast console.
> -
> -config SND_SH_DAC_AUDIO
> - tristate "SuperH DAC audio support"
> - depends on SND
> - depends on CPU_SH3 && HIGH_RES_TIMERS
> - select SND_PCM
> - help
> - Say Y here to include support for the on-chip DAC.
> -
> -endif # SND_SUPERH
> -
> diff --git a/sound/sh/Makefile b/sound/sh/Makefile
> deleted file mode 100644
> index c0bbc500c17c73..00000000000000
> --- a/sound/sh/Makefile
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -#
> -# Makefile for ALSA
> -#
> -
> -snd-aica-objs := aica.o
> -snd-sh_dac_audio-objs := sh_dac_audio.o
> -
> -# Toplevel Module Dependency
> -obj-$(CONFIG_SND_AICA) += snd-aica.o
> -obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
> diff --git a/sound/sh/aica.c b/sound/sh/aica.c
> deleted file mode 100644
> index 6e9d6bd67369af..00000000000000
> --- a/sound/sh/aica.c
> +++ /dev/null
> @@ -1,628 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> -*
> -* Copyright Adrian McMenamin 2005, 2006, 2007
> -* <adrian@mcmen.demon.co.uk>
> -* Requires firmware (BSD licenced) available from:
> -* http://linuxdc.cvs.sourceforge.net/linuxdc/linux-sh-dc/sound/oss/aica/firmware/
> -* or the maintainer
> -*/
> -
> -#include <linux/init.h>
> -#include <linux/jiffies.h>
> -#include <linux/slab.h>
> -#include <linux/time.h>
> -#include <linux/wait.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/firmware.h>
> -#include <linux/timer.h>
> -#include <linux/delay.h>
> -#include <linux/workqueue.h>
> -#include <linux/io.h>
> -#include <sound/core.h>
> -#include <sound/control.h>
> -#include <sound/pcm.h>
> -#include <sound/initval.h>
> -#include <sound/info.h>
> -#include <asm/dma.h>
> -#include <mach/sysasic.h>
> -#include "aica.h"
> -
> -MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
> -MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
> -MODULE_LICENSE("GPL");
> -MODULE_FIRMWARE("aica_firmware.bin");
> -
> -/* module parameters */
> -#define CARD_NAME "AICA"
> -static int index = -1;
> -static char *id;
> -static bool enable = 1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
> -module_param(enable, bool, 0644);
> -MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
> -
> -/* Simple platform device */
> -static struct platform_device *pd;
> -static struct resource aica_memory_space[2] = {
> - {
> - .name = "AICA ARM CONTROL",
> - .start = ARM_RESET_REGISTER,
> - .flags = IORESOURCE_MEM,
> - .end = ARM_RESET_REGISTER + 3,
> - },
> - {
> - .name = "AICA Sound RAM",
> - .start = SPU_MEMORY_BASE,
> - .flags = IORESOURCE_MEM,
> - .end = SPU_MEMORY_BASE + 0x200000 - 1,
> - },
> -};
> -
> -/* SPU specific functions */
> -/* spu_write_wait - wait for G2-SH FIFO to clear */
> -static void spu_write_wait(void)
> -{
> - int time_count;
> - time_count = 0;
> - while (1) {
> - if (!(readl(G2_FIFO) & 0x11))
> - break;
> - /* To ensure hardware failure doesn't wedge kernel */
> - time_count++;
> - if (time_count > 0x10000) {
> - snd_printk
> - ("WARNING: G2 FIFO appears to be blocked.\n");
> - break;
> - }
> - }
> -}
> -
> -/* spu_memset - write to memory in SPU address space */
> -static void spu_memset(u32 toi, u32 what, int length)
> -{
> - int i;
> - unsigned long flags;
> - if (snd_BUG_ON(length % 4))
> - return;
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(what, toi + SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - toi++;
> - }
> -}
> -
> -/* spu_memload - write to SPU address space */
> -static void spu_memload(u32 toi, const void *from, int length)
> -{
> - unsigned long flags;
> - const u32 *froml = from;
> - u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi);
> - int i;
> - u32 val;
> - length = DIV_ROUND_UP(length, 4);
> - spu_write_wait();
> - for (i = 0; i < length; i++) {
> - if (!(i % 8))
> - spu_write_wait();
> - val = *froml;
> - local_irq_save(flags);
> - writel(val, to);
> - local_irq_restore(flags);
> - froml++;
> - to++;
> - }
> -}
> -
> -/* spu_disable - set spu registers to stop sound output */
> -static void spu_disable(void)
> -{
> - int i;
> - unsigned long flags;
> - u32 regval;
> - spu_write_wait();
> - regval = readl(ARM_RESET_REGISTER);
> - regval |= 1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> - for (i = 0; i < 64; i++) {
> - spu_write_wait();
> - regval = readl(SPU_REGISTER_BASE + (i * 0x80));
> - regval = (regval & ~0x4000) | 0x8000;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, SPU_REGISTER_BASE + (i * 0x80));
> - local_irq_restore(flags);
> - }
> -}
> -
> -/* spu_enable - set spu registers to enable sound output */
> -static void spu_enable(void)
> -{
> - unsigned long flags;
> - u32 regval = readl(ARM_RESET_REGISTER);
> - regval &= ~1;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(regval, ARM_RESET_REGISTER);
> - local_irq_restore(flags);
> -}
> -
> -/*
> - * Halt the sound processor, clear the memory,
> - * load some default ARM7 code, and then restart ARM7
> -*/
> -static void spu_reset(void)
> -{
> - unsigned long flags;
> - spu_disable();
> - spu_memset(0, 0, 0x200000 / 4);
> - /* Put ARM7 in endless loop */
> - local_irq_save(flags);
> - __raw_writel(0xea000002, SPU_MEMORY_BASE);
> - local_irq_restore(flags);
> - spu_enable();
> -}
> -
> -/* aica_chn_start - write to spu to start playback */
> -static void aica_chn_start(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* aica_chn_halt - write to spu to halt playback */
> -static void aica_chn_halt(void)
> -{
> - unsigned long flags;
> - spu_write_wait();
> - local_irq_save(flags);
> - writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT);
> - local_irq_restore(flags);
> -}
> -
> -/* ALSA code below */
> -static const struct snd_pcm_hardware snd_pcm_aica_playback_hw = {
> - .info = (SNDRV_PCM_INFO_NONINTERLEAVED),
> - .formats =
> - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |
> - SNDRV_PCM_FMTBIT_IMA_ADPCM),
> - .rates = SNDRV_PCM_RATE_8000_48000,
> - .rate_min = 8000,
> - .rate_max = 48000,
> - .channels_min = 1,
> - .channels_max = 2,
> - .buffer_bytes_max = AICA_BUFFER_SIZE,
> - .period_bytes_min = AICA_PERIOD_SIZE,
> - .period_bytes_max = AICA_PERIOD_SIZE,
> - .periods_min = AICA_PERIOD_NUMBER,
> - .periods_max = AICA_PERIOD_NUMBER,
> -};
> -
> -static int aica_dma_transfer(int channels, int buffer_size,
> - struct snd_pcm_substream *substream)
> -{
> - int q, err, period_offset;
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - unsigned long flags;
> - err = 0;
> - dreamcastcard = substream->pcm->private_data;
> - period_offset = dreamcastcard->clicks;
> - period_offset %= (AICA_PERIOD_NUMBER / channels);
> - runtime = substream->runtime;
> - for (q = 0; q < channels; q++) {
> - local_irq_save(flags);
> - err = dma_xfer(AICA_DMA_CHANNEL,
> - (unsigned long) (runtime->dma_area +
> - (AICA_BUFFER_SIZE * q) /
> - channels +
> - AICA_PERIOD_SIZE *
> - period_offset),
> - AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET +
> - AICA_PERIOD_SIZE * period_offset,
> - buffer_size / channels, AICA_DMA_MODE);
> - if (unlikely(err < 0)) {
> - local_irq_restore(flags);
> - break;
> - }
> - dma_wait_for_completion(AICA_DMA_CHANNEL);
> - local_irq_restore(flags);
> - }
> - return err;
> -}
> -
> -static void startup_aica(struct snd_card_aica *dreamcastcard)
> -{
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - aica_chn_start();
> -}
> -
> -static void run_spu_dma(struct work_struct *work)
> -{
> - int buffer_size;
> - struct snd_pcm_runtime *runtime;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard =
> - container_of(work, struct snd_card_aica, spu_dma_work);
> - runtime = dreamcastcard->substream->runtime;
> - if (unlikely(dreamcastcard->dma_check == 0)) {
> - buffer_size =
> - frames_to_bytes(runtime, runtime->buffer_size);
> - if (runtime->channels > 1)
> - dreamcastcard->channel->flags |= 0x01;
> - aica_dma_transfer(runtime->channels, buffer_size,
> - dreamcastcard->substream);
> - startup_aica(dreamcastcard);
> - dreamcastcard->clicks =
> - buffer_size / (AICA_PERIOD_SIZE * runtime->channels);
> - return;
> - } else {
> - aica_dma_transfer(runtime->channels,
> - AICA_PERIOD_SIZE * runtime->channels,
> - dreamcastcard->substream);
> - snd_pcm_period_elapsed(dreamcastcard->substream);
> - dreamcastcard->clicks++;
> - if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER))
> - dreamcastcard->clicks %= AICA_PERIOD_NUMBER;
> - mod_timer(&dreamcastcard->timer, jiffies + 1);
> - }
> -}
> -
> -static void aica_period_elapsed(struct timer_list *t)
> -{
> - struct snd_card_aica *dreamcastcard = from_timer(dreamcastcard,
> - t, timer);
> - struct snd_pcm_substream *substream = dreamcastcard->substream;
> - /*timer function - so cannot sleep */
> - int play_period;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /* Have we played out an additional period? */
> - play_period =
> - frames_to_bytes(runtime,
> - readl
> - (AICA_CONTROL_CHANNEL_SAMPLE_NUMBER)) /
> - AICA_PERIOD_SIZE;
> - if (play_period == dreamcastcard->current_period) {
> - /* reschedule the timer */
> - mod_timer(&(dreamcastcard->timer), jiffies + 1);
> - return;
> - }
> - if (runtime->channels > 1)
> - dreamcastcard->current_period = play_period;
> - if (unlikely(dreamcastcard->dma_check == 0))
> - dreamcastcard->dma_check = 1;
> - schedule_work(&(dreamcastcard->spu_dma_work));
> -}
> -
> -static void spu_begin_dma(struct snd_pcm_substream *substream)
> -{
> - struct snd_card_aica *dreamcastcard;
> - struct snd_pcm_runtime *runtime;
> - runtime = substream->runtime;
> - dreamcastcard = substream->pcm->private_data;
> - /*get the queue to do the work */
> - schedule_work(&(dreamcastcard->spu_dma_work));
> - mod_timer(&dreamcastcard->timer, jiffies + 4);
> -}
> -
> -static int snd_aicapcm_pcm_open(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_pcm_runtime *runtime;
> - struct aica_channel *channel;
> - struct snd_card_aica *dreamcastcard;
> - if (!enable)
> - return -ENOENT;
> - dreamcastcard = substream->pcm->private_data;
> - channel = kmalloc(sizeof(struct aica_channel), GFP_KERNEL);
> - if (!channel)
> - return -ENOMEM;
> - /* set defaults for channel */
> - channel->sfmt = SM_8BIT;
> - channel->cmd = AICA_CMD_START;
> - channel->vol = dreamcastcard->master_volume;
> - channel->pan = 0x80;
> - channel->pos = 0;
> - channel->flags = 0; /* default to mono */
> - dreamcastcard->channel = channel;
> - runtime = substream->runtime;
> - runtime->hw = snd_pcm_aica_playback_hw;
> - spu_enable();
> - dreamcastcard->clicks = 0;
> - dreamcastcard->current_period = 0;
> - dreamcastcard->dma_check = 0;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_close(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - flush_work(&(dreamcastcard->spu_dma_work));
> - del_timer(&dreamcastcard->timer);
> - dreamcastcard->substream = NULL;
> - kfree(dreamcastcard->channel);
> - spu_disable();
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_prepare(struct snd_pcm_substream
> - *substream)
> -{
> - struct snd_card_aica *dreamcastcard = substream->pcm->private_data;
> - if ((substream->runtime)->format == SNDRV_PCM_FORMAT_S16_LE)
> - dreamcastcard->channel->sfmt = SM_16BIT;
> - dreamcastcard->channel->freq = substream->runtime->rate;
> - dreamcastcard->substream = substream;
> - return 0;
> -}
> -
> -static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream
> - *substream, int cmd)
> -{
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - spu_begin_dma(substream);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - aica_chn_halt();
> - break;
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -static unsigned long snd_aicapcm_pcm_pointer(struct snd_pcm_substream
> - *substream)
> -{
> - return readl(AICA_CONTROL_CHANNEL_SAMPLE_NUMBER);
> -}
> -
> -static const struct snd_pcm_ops snd_aicapcm_playback_ops = {
> - .open = snd_aicapcm_pcm_open,
> - .close = snd_aicapcm_pcm_close,
> - .prepare = snd_aicapcm_pcm_prepare,
> - .trigger = snd_aicapcm_pcm_trigger,
> - .pointer = snd_aicapcm_pcm_pointer,
> -};
> -
> -/* TO DO: set up to handle more than one pcm instance */
> -static int __init snd_aicapcmchip(struct snd_card_aica
> - *dreamcastcard, int pcm_index)
> -{
> - struct snd_pcm *pcm;
> - int err;
> - /* AICA has no capture ability */
> - err =
> - snd_pcm_new(dreamcastcard->card, "AICA PCM", pcm_index, 1, 0,
> - &pcm);
> - if (unlikely(err < 0))
> - return err;
> - pcm->private_data = dreamcastcard;
> - strcpy(pcm->name, "AICA PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
> - &snd_aicapcm_playback_ops);
> - /* Allocate the DMA buffers */
> - snd_pcm_set_managed_buffer_all(pcm,
> - SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL,
> - AICA_BUFFER_SIZE,
> - AICA_BUFFER_SIZE);
> - return 0;
> -}
> -
> -/* Mixer controls */
> -#define aica_pcmswitch_info snd_ctl_boolean_mono_info
> -
> -static int aica_pcmswitch_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - ucontrol->value.integer.value[0] = 1; /* TO DO: Fix me */
> - return 0;
> -}
> -
> -static int aica_pcmswitch_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - if (ucontrol->value.integer.value[0] == 1)
> - return 0; /* TO DO: Fix me */
> - else
> - aica_chn_halt();
> - return 0;
> -}
> -
> -static int aica_pcmvolume_info(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_info *uinfo)
> -{
> - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> - uinfo->count = 1;
> - uinfo->value.integer.min = 0;
> - uinfo->value.integer.max = 0xFF;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY; /* we've not yet been set up */
> - ucontrol->value.integer.value[0] = dreamcastcard->channel->vol;
> - return 0;
> -}
> -
> -static int aica_pcmvolume_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> -{
> - struct snd_card_aica *dreamcastcard;
> - unsigned int vol;
> - dreamcastcard = kcontrol->private_data;
> - if (unlikely(!dreamcastcard->channel))
> - return -ETXTBSY;
> - vol = ucontrol->value.integer.value[0];
> - if (vol > 0xff)
> - return -EINVAL;
> - if (unlikely(dreamcastcard->channel->vol == vol))
> - return 0;
> - dreamcastcard->channel->vol = ucontrol->value.integer.value[0];
> - dreamcastcard->master_volume = ucontrol->value.integer.value[0];
> - spu_memload(AICA_CHANNEL0_CONTROL_OFFSET,
> - dreamcastcard->channel, sizeof(struct aica_channel));
> - return 1;
> -}
> -
> -static const struct snd_kcontrol_new snd_aica_pcmswitch_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Switch",
> - .index = 0,
> - .info = aica_pcmswitch_info,
> - .get = aica_pcmswitch_get,
> - .put = aica_pcmswitch_put
> -};
> -
> -static const struct snd_kcontrol_new snd_aica_pcmvolume_control = {
> - .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> - .name = "PCM Playback Volume",
> - .index = 0,
> - .info = aica_pcmvolume_info,
> - .get = aica_pcmvolume_get,
> - .put = aica_pcmvolume_put
> -};
> -
> -static int load_aica_firmware(void)
> -{
> - int err;
> - const struct firmware *fw_entry;
> - spu_reset();
> - err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
> - if (unlikely(err))
> - return err;
> - /* write firmware into memory */
> - spu_disable();
> - spu_memload(0, fw_entry->data, fw_entry->size);
> - spu_enable();
> - release_firmware(fw_entry);
> - return err;
> -}
> -
> -static int add_aicamixer_controls(struct snd_card_aica *dreamcastcard)
> -{
> - int err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmvolume_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - err = snd_ctl_add
> - (dreamcastcard->card,
> - snd_ctl_new1(&snd_aica_pcmswitch_control, dreamcastcard));
> - if (unlikely(err < 0))
> - return err;
> - return 0;
> -}
> -
> -static int snd_aica_remove(struct platform_device *devptr)
> -{
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = platform_get_drvdata(devptr);
> - if (unlikely(!dreamcastcard))
> - return -ENODEV;
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return 0;
> -}
> -
> -static int snd_aica_probe(struct platform_device *devptr)
> -{
> - int err;
> - struct snd_card_aica *dreamcastcard;
> - dreamcastcard = kzalloc(sizeof(struct snd_card_aica), GFP_KERNEL);
> - if (unlikely(!dreamcastcard))
> - return -ENOMEM;
> - err = snd_card_new(&devptr->dev, index, SND_AICA_DRIVER,
> - THIS_MODULE, 0, &dreamcastcard->card);
> - if (unlikely(err < 0)) {
> - kfree(dreamcastcard);
> - return err;
> - }
> - strcpy(dreamcastcard->card->driver, "snd_aica");
> - strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER);
> - strcpy(dreamcastcard->card->longname,
> - "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast");
> - /* Prepare to use the queue */
> - INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma);
> - timer_setup(&dreamcastcard->timer, aica_period_elapsed, 0);
> - /* Load the PCM 'chip' */
> - err = snd_aicapcmchip(dreamcastcard, 0);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Add basic controls */
> - err = add_aicamixer_controls(dreamcastcard);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - /* Register the card with ALSA subsystem */
> - err = snd_card_register(dreamcastcard->card);
> - if (unlikely(err < 0))
> - goto freedreamcast;
> - platform_set_drvdata(devptr, dreamcastcard);
> - snd_printk
> - ("ALSA Driver for Yamaha AICA Super Intelligent Sound Processor\n");
> - return 0;
> - freedreamcast:
> - snd_card_free(dreamcastcard->card);
> - kfree(dreamcastcard);
> - return err;
> -}
> -
> -static struct platform_driver snd_aica_driver = {
> - .probe = snd_aica_probe,
> - .remove = snd_aica_remove,
> - .driver = {
> - .name = SND_AICA_DRIVER,
> - },
> -};
> -
> -static int __init aica_init(void)
> -{
> - int err;
> - err = platform_driver_register(&snd_aica_driver);
> - if (unlikely(err < 0))
> - return err;
> - pd = platform_device_register_simple(SND_AICA_DRIVER, -1,
> - aica_memory_space, 2);
> - if (IS_ERR(pd)) {
> - platform_driver_unregister(&snd_aica_driver);
> - return PTR_ERR(pd);
> - }
> - /* Load the firmware */
> - return load_aica_firmware();
> -}
> -
> -static void __exit aica_exit(void)
> -{
> - platform_device_unregister(pd);
> - platform_driver_unregister(&snd_aica_driver);
> - /* Kill any sound still playing and reset ARM7 to safe state */
> - spu_reset();
> -}
> -
> -module_init(aica_init);
> -module_exit(aica_exit);
> diff --git a/sound/sh/aica.h b/sound/sh/aica.h
> deleted file mode 100644
> index 021b132e088e82..00000000000000
> --- a/sound/sh/aica.h
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* aica.h
> - * Header file for ALSA driver for
> - * Sega Dreamcast Yamaha AICA sound
> - * Copyright Adrian McMenamin
> - * <adrian@mcmen.demon.co.uk>
> - * 2006
> - */
> -
> -/* SPU memory and register constants etc */
> -#define G2_FIFO 0xa05f688c
> -#define SPU_MEMORY_BASE 0xA0800000
> -#define ARM_RESET_REGISTER 0xA0702C00
> -#define SPU_REGISTER_BASE 0xA0700000
> -
> -/* AICA channels stuff */
> -#define AICA_CONTROL_POINT 0xA0810000
> -#define AICA_CONTROL_CHANNEL_SAMPLE_NUMBER 0xA0810008
> -#define AICA_CHANNEL0_CONTROL_OFFSET 0x10004
> -
> -/* Command values */
> -#define AICA_CMD_KICK 0x80000000
> -#define AICA_CMD_NONE 0
> -#define AICA_CMD_START 1
> -#define AICA_CMD_STOP 2
> -#define AICA_CMD_VOL 3
> -
> -/* Sound modes */
> -#define SM_8BIT 1
> -#define SM_16BIT 0
> -#define SM_ADPCM 2
> -
> -/* Buffer and period size */
> -#define AICA_BUFFER_SIZE 0x8000
> -#define AICA_PERIOD_SIZE 0x800
> -#define AICA_PERIOD_NUMBER 16
> -
> -#define AICA_CHANNEL0_OFFSET 0x11000
> -#define AICA_CHANNEL1_OFFSET 0x21000
> -#define CHANNEL_OFFSET 0x10000
> -
> -#define AICA_DMA_CHANNEL 5
> -#define AICA_DMA_MODE 5
> -
> -#define SND_AICA_DRIVER "AICA"
> -
> -struct aica_channel {
> - uint32_t cmd; /* Command ID */
> - uint32_t pos; /* Sample position */
> - uint32_t length; /* Sample length */
> - uint32_t freq; /* Frequency */
> - uint32_t vol; /* Volume 0-255 */
> - uint32_t pan; /* Pan 0-255 */
> - uint32_t sfmt; /* Sound format */
> - uint32_t flags; /* Bit flags */
> -};
> -
> -struct snd_card_aica {
> - struct work_struct spu_dma_work;
> - struct snd_card *card;
> - struct aica_channel *channel;
> - struct snd_pcm_substream *substream;
> - int clicks;
> - int current_period;
> - struct timer_list timer;
> - int master_volume;
> - int dma_check;
> -};
> diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
> deleted file mode 100644
> index 8ebd972846acb5..00000000000000
> --- a/sound/sh/sh_dac_audio.c
> +++ /dev/null
> @@ -1,412 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * sh_dac_audio.c - SuperH DAC audio driver for ALSA
> - *
> - * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
> - *
> - * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
> - */
> -
> -#include <linux/hrtimer.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/module.h>
> -#include <sound/core.h>
> -#include <sound/initval.h>
> -#include <sound/pcm.h>
> -#include <sound/sh_dac_audio.h>
> -#include <asm/clock.h>
> -#include <asm/hd64461.h>
> -#include <mach/hp6xx.h>
> -#include <cpu/dac.h>
> -
> -MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
> -MODULE_DESCRIPTION("SuperH DAC audio driver");
> -MODULE_LICENSE("GPL");
> -
> -/* Module Parameters */
> -static int index = SNDRV_DEFAULT_IDX1;
> -static char *id = SNDRV_DEFAULT_STR1;
> -module_param(index, int, 0444);
> -MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
> -module_param(id, charp, 0444);
> -MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
> -
> -/* main struct */
> -struct snd_sh_dac {
> - struct snd_card *card;
> - struct snd_pcm_substream *substream;
> - struct hrtimer hrtimer;
> - ktime_t wakeups_per_second;
> -
> - int rate;
> - int empty;
> - char *data_buffer, *buffer_begin, *buffer_end;
> - int processed; /* bytes proccesed, to compare with period_size */
> - int buffer_size;
> - struct dac_audio_pdata *pdata;
> -};
> -
> -
> -static void dac_audio_start_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -}
> -
> -static void dac_audio_stop_timer(struct snd_sh_dac *chip)
> -{
> - hrtimer_cancel(&chip->hrtimer);
> -}
> -
> -static void dac_audio_reset(struct snd_sh_dac *chip)
> -{
> - dac_audio_stop_timer(chip);
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -}
> -
> -static void dac_audio_set_rate(struct snd_sh_dac *chip)
> -{
> - chip->wakeups_per_second = 1000000000 / chip->rate;
> -}
> -
> -
> -/* PCM INTERFACE */
> -
> -static const struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
> - .info = (SNDRV_PCM_INFO_MMAP |
> - SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_INTERLEAVED |
> - SNDRV_PCM_INFO_HALF_DUPLEX),
> - .formats = SNDRV_PCM_FMTBIT_U8,
> - .rates = SNDRV_PCM_RATE_8000,
> - .rate_min = 8000,
> - .rate_max = 8000,
> - .channels_min = 1,
> - .channels_max = 1,
> - .buffer_bytes_max = (48*1024),
> - .period_bytes_min = 1,
> - .period_bytes_max = (48*1024),
> - .periods_min = 1,
> - .periods_max = 1024,
> -};
> -
> -static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = substream->runtime;
> -
> - runtime->hw = snd_sh_dac_pcm_hw;
> -
> - chip->substream = substream;
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> -
> - chip->pdata->start(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - chip->substream = NULL;
> -
> - dac_audio_stop_timer(chip);
> - chip->pdata->stop(chip->pdata);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> -
> - chip->buffer_size = runtime->buffer_size;
> - memset(chip->data_buffer, 0, chip->pdata->buffer_size);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - dac_audio_start_timer(chip);
> - break;
> - case SNDRV_PCM_TRIGGER_STOP:
> - chip->buffer_begin = chip->buffer_end = chip->data_buffer;
> - chip->processed = 0;
> - chip->empty = 1;
> - dac_audio_stop_timer(chip);
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void __user *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - if (copy_from_user_toio(chip->data_buffer + pos, src, count))
> - return -EFAULT;
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_copy_kernel(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - void *src, unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memcpy_toio(chip->data_buffer + pos, src, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
> - int channel, unsigned long pos,
> - unsigned long count)
> -{
> - /* channel is not used (interleaved data) */
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> -
> - memset_io(chip->data_buffer + pos, 0, count);
> - chip->buffer_end = chip->data_buffer + pos + count;
> -
> - if (chip->empty) {
> - chip->empty = 0;
> - dac_audio_start_timer(chip);
> - }
> -
> - return 0;
> -}
> -
> -static
> -snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
> -{
> - struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
> - int pointer = chip->buffer_begin - chip->data_buffer;
> -
> - return pointer;
> -}
> -
> -/* pcm ops */
> -static const struct snd_pcm_ops snd_sh_dac_pcm_ops = {
> - .open = snd_sh_dac_pcm_open,
> - .close = snd_sh_dac_pcm_close,
> - .prepare = snd_sh_dac_pcm_prepare,
> - .trigger = snd_sh_dac_pcm_trigger,
> - .pointer = snd_sh_dac_pcm_pointer,
> - .copy_user = snd_sh_dac_pcm_copy,
> - .copy_kernel = snd_sh_dac_pcm_copy_kernel,
> - .fill_silence = snd_sh_dac_pcm_silence,
> - .mmap = snd_pcm_lib_mmap_iomem,
> -};
> -
> -static int snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
> -{
> - int err;
> - struct snd_pcm *pcm;
> -
> - /* device should be always 0 for us */
> - err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
> - if (err < 0)
> - return err;
> -
> - pcm->private_data = chip;
> - strcpy(pcm->name, "SH_DAC PCM");
> - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
> -
> - /* buffer size=48K */
> - snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
> - NULL, 48 * 1024, 48 * 1024);
> -
> - return 0;
> -}
> -/* END OF PCM INTERFACE */
> -
> -
> -/* driver .remove -- destructor */
> -static int snd_sh_dac_remove(struct platform_device *devptr)
> -{
> - snd_card_free(platform_get_drvdata(devptr));
> - return 0;
> -}
> -
> -/* free -- it has been defined by create */
> -static int snd_sh_dac_free(struct snd_sh_dac *chip)
> -{
> - /* release the data */
> - kfree(chip->data_buffer);
> - kfree(chip);
> -
> - return 0;
> -}
> -
> -static int snd_sh_dac_dev_free(struct snd_device *device)
> -{
> - struct snd_sh_dac *chip = device->device_data;
> -
> - return snd_sh_dac_free(chip);
> -}
> -
> -static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
> -{
> - struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
> - hrtimer);
> - struct snd_pcm_runtime *runtime = chip->substream->runtime;
> - ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
> -
> - if (!chip->empty) {
> - sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
> - chip->buffer_begin++;
> -
> - chip->processed++;
> - if (chip->processed >= b_ps) {
> - chip->processed -= b_ps;
> - snd_pcm_period_elapsed(chip->substream);
> - }
> -
> - if (chip->buffer_begin == (chip->data_buffer +
> - chip->buffer_size - 1))
> - chip->buffer_begin = chip->data_buffer;
> -
> - if (chip->buffer_begin == chip->buffer_end)
> - chip->empty = 1;
> -
> - }
> -
> - if (!chip->empty)
> - hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
> - HRTIMER_MODE_REL);
> -
> - return HRTIMER_NORESTART;
> -}
> -
> -/* create -- chip-specific constructor for the cards components */
> -static int snd_sh_dac_create(struct snd_card *card,
> - struct platform_device *devptr,
> - struct snd_sh_dac **rchip)
> -{
> - struct snd_sh_dac *chip;
> - int err;
> -
> - static const struct snd_device_ops ops = {
> - .dev_free = snd_sh_dac_dev_free,
> - };
> -
> - *rchip = NULL;
> -
> - chip = kzalloc(sizeof(*chip), GFP_KERNEL);
> - if (chip == NULL)
> - return -ENOMEM;
> -
> - chip->card = card;
> -
> - hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> - chip->hrtimer.function = sh_dac_audio_timer;
> -
> - dac_audio_reset(chip);
> - chip->rate = 8000;
> - dac_audio_set_rate(chip);
> -
> - chip->pdata = devptr->dev.platform_data;
> -
> - chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
> - if (chip->data_buffer == NULL) {
> - kfree(chip);
> - return -ENOMEM;
> - }
> -
> - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
> - if (err < 0) {
> - snd_sh_dac_free(chip);
> - return err;
> - }
> -
> - *rchip = chip;
> -
> - return 0;
> -}
> -
> -/* driver .probe -- constructor */
> -static int snd_sh_dac_probe(struct platform_device *devptr)
> -{
> - struct snd_sh_dac *chip;
> - struct snd_card *card;
> - int err;
> -
> - err = snd_card_new(&devptr->dev, index, id, THIS_MODULE, 0, &card);
> - if (err < 0) {
> - snd_printk(KERN_ERR "cannot allocate the card\n");
> - return err;
> - }
> -
> - err = snd_sh_dac_create(card, devptr, &chip);
> - if (err < 0)
> - goto probe_error;
> -
> - err = snd_sh_dac_pcm(chip, 0);
> - if (err < 0)
> - goto probe_error;
> -
> - strcpy(card->driver, "snd_sh_dac");
> - strcpy(card->shortname, "SuperH DAC audio driver");
> - printk(KERN_INFO "%s %s", card->longname, card->shortname);
> -
> - err = snd_card_register(card);
> - if (err < 0)
> - goto probe_error;
> -
> - snd_printk(KERN_INFO "ALSA driver for SuperH DAC audio");
> -
> - platform_set_drvdata(devptr, card);
> - return 0;
> -
> -probe_error:
> - snd_card_free(card);
> - return err;
> -}
> -
> -/*
> - * "driver" definition
> - */
> -static struct platform_driver sh_dac_driver = {
> - .probe = snd_sh_dac_probe,
> - .remove = snd_sh_dac_remove,
> - .driver = {
> - .name = "dac_audio",
> - },
> -};
> -
> -module_platform_driver(sh_dac_driver);
> --
> 2.39.0
>
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/soc/sh/Kconfig | 44 --
sound/soc/sh/Makefile | 16 -
sound/soc/sh/dma-sh7760.c | 334 ----------------
sound/soc/sh/fsi.c | 9 -
sound/soc/sh/hac.c | 345 ----------------
sound/soc/sh/migor.c | 205 ----------
sound/soc/sh/sh7760-ac97.c | 72 ----
sound/soc/sh/siu.h | 180 ---------
sound/soc/sh/siu_dai.c | 799 -------------------------------------
sound/soc/sh/siu_pcm.c | 553 -------------------------
sound/soc/sh/ssi.c | 403 -------------------
11 files changed, 2960 deletions(-)
delete mode 100644 sound/soc/sh/dma-sh7760.c
delete mode 100644 sound/soc/sh/hac.c
delete mode 100644 sound/soc/sh/migor.c
delete mode 100644 sound/soc/sh/sh7760-ac97.c
delete mode 100644 sound/soc/sh/siu.h
delete mode 100644 sound/soc/sh/siu_dai.c
delete mode 100644 sound/soc/sh/siu_pcm.c
delete mode 100644 sound/soc/sh/ssi.c
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 793a0326f32b46..4367927b81df20 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -2,25 +2,10 @@
menu "SoC Audio support for Renesas SoCs"
depends on ARCH_RENESAS || COMPILE_TEST
-config SND_SOC_PCM_SH7760
- tristate "SoC Audio support for Renesas SH7760"
- depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
- help
- Enable this option for SH7760 AC97/I2S audio support.
-
-
##
## Audio unit modules
##
-config SND_SOC_SH4_HAC
- tristate
- select AC97_BUS
- select SND_SOC_AC97_BUS
-
-config SND_SOC_SH4_SSI
- tristate
-
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
depends on COMMON_CLK
@@ -28,14 +13,6 @@ config SND_SOC_SH4_FSI
help
This option enables FSI sound support
-config SND_SOC_SH4_SIU
- tristate
- depends on ARCH_SHMOBILE && HAVE_CLK
- depends on DMADEVICES
- select DMA_ENGINE
- select SH_DMAE
- select FW_LOADER
-
config SND_SOC_RCAR
tristate "R-Car series SRU/SCU/SSIU/SSI support"
depends on COMMON_CLK
@@ -51,25 +28,4 @@ config SND_SOC_RZ
help
This option enables RZ/G2L SSIF-2 sound support.
-##
-## Boards
-##
-
-config SND_SH7760_AC97
- tristate "SH7760 AC97 sound support"
- depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760
- select SND_SOC_SH4_HAC
- select SND_SOC_AC97_CODEC
- help
- This option enables generic sound support for the first
- AC97 unit of the SH7760.
-
-config SND_SIU_MIGOR
- tristate "SIU sound support on Migo-R"
- depends on SH_MIGOR && I2C
- select SND_SOC_SH4_SIU
- select SND_SOC_WM8978
- help
- This option enables sound support for the SH7722 Migo-R board
-
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index f6fd79948f6ae9..c308dda887e633 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -1,28 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
-## DMA engines
-snd-soc-dma-sh7760-objs := dma-sh7760.o
-obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o
## audio units found on some SH-4
-snd-soc-hac-objs := hac.o
-snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
-snd-soc-siu-objs := siu_pcm.o siu_dai.o
-obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
-obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
-obj-$(CONFIG_SND_SOC_SH4_SIU) += snd-soc-siu.o
## audio units for R-Car
obj-$(CONFIG_SND_SOC_RCAR) += rcar/
-## boards
-snd-soc-sh7760-ac97-objs := sh7760-ac97.o
-snd-soc-migor-objs := migor.o
-
-obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
-obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
-
# RZ/G2L
snd-soc-rz-ssi-objs := rz-ssi.o
obj-$(CONFIG_SND_SOC_RZ) += snd-soc-rz-ssi.o
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
deleted file mode 100644
index 121e48f984c50c..00000000000000
--- a/sound/soc/sh/dma-sh7760.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// SH7760 ("camelot") DMABRG audio DMA unit support
-//
-// Copyright (C) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which
-// trigger an interrupt when one half of the programmed transfer size
-// has been xmitted.
-//
-// FIXME: little-endian only for now
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dmabrg.h>
-
-
-/* registers and bits */
-#define BRGATXSAR 0x00
-#define BRGARXDAR 0x04
-#define BRGATXTCR 0x08
-#define BRGARXTCR 0x0C
-#define BRGACR 0x10
-#define BRGATXTCNT 0x14
-#define BRGARXTCNT 0x18
-
-#define ACR_RAR (1 << 18)
-#define ACR_RDS (1 << 17)
-#define ACR_RDE (1 << 16)
-#define ACR_TAR (1 << 2)
-#define ACR_TDS (1 << 1)
-#define ACR_TDE (1 << 0)
-
-/* receiver/transmitter data alignment */
-#define ACR_RAM_NONE (0 << 24)
-#define ACR_RAM_4BYTE (1 << 24)
-#define ACR_RAM_2WORD (2 << 24)
-#define ACR_TAM_NONE (0 << 8)
-#define ACR_TAM_4BYTE (1 << 8)
-#define ACR_TAM_2WORD (2 << 8)
-
-
-struct camelot_pcm {
- unsigned long mmio; /* DMABRG audio channel control reg MMIO */
- unsigned int txid; /* ID of first DMABRG IRQ for this unit */
-
- struct snd_pcm_substream *tx_ss;
- unsigned long tx_period_size;
- unsigned int tx_period;
-
- struct snd_pcm_substream *rx_ss;
- unsigned long rx_period_size;
- unsigned int rx_period;
-
-} cam_pcm_data[2] = {
- {
- .mmio = 0xFE3C0040,
- .txid = DMABRGIRQ_A0TXF,
- },
- {
- .mmio = 0xFE3C0060,
- .txid = DMABRGIRQ_A1TXF,
- },
-};
-
-#define BRGREG(x) (*(unsigned long *)(cam->mmio + (x)))
-
-/*
- * set a minimum of 16kb per period, to avoid interrupt-"storm" and
- * resulting skipping. In general, the bigger the minimum size, the
- * better for overall system performance. (The SH7760 is a puny CPU
- * with a slow SDRAM interface and poor internal bus bandwidth,
- * *especially* when the LCDC is active). The minimum for the DMAC
- * is 8 bytes; 16kbytes are enough to get skip-free playback of a
- * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain
- * reasonable responsiveness in MPlayer.
- */
-#define DMABRG_PERIOD_MIN 16 * 1024
-#define DMABRG_PERIOD_MAX 0x03fffffc
-#define DMABRG_PREALLOC_BUFFER 32 * 1024
-#define DMABRG_PREALLOC_BUFFER_MAX 32 * 1024
-
-static const struct snd_pcm_hardware camelot_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_BATCH),
- .buffer_bytes_max = DMABRG_PERIOD_MAX,
- .period_bytes_min = DMABRG_PERIOD_MIN,
- .period_bytes_max = DMABRG_PERIOD_MAX / 2,
- .periods_min = 2,
- .periods_max = 2,
- .fifo_size = 128,
-};
-
-static void camelot_txdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->tx_period ^= 1;
- snd_pcm_period_elapsed(cam->tx_ss);
-}
-
-static void camelot_rxdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->rx_period ^= 1;
- snd_pcm_period_elapsed(cam->rx_ss);
-}
-
-static int camelot_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int ret, dmairq;
-
- snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware);
-
- /* DMABRG buffer half/full events */
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
- if (recv) {
- cam->rx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
- } else {
- cam->tx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
- }
- return 0;
-}
-
-static int camelot_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int dmairq;
-
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
-
- if (recv)
- cam->rx_ss = NULL;
- else
- cam->tx_ss = NULL;
-
- dmabrg_free_irq(dmairq + 1);
- dmabrg_free_irq(dmairq);
-
- return 0;
-}
-
-static int camelot_hw_params(struct snd_soc_component *component,
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- if (recv) {
- cam->rx_period_size = params_period_bytes(hw_params);
- cam->rx_period = 0;
- } else {
- cam->tx_period_size = params_period_bytes(hw_params);
- cam->tx_period = 0;
- }
- return 0;
-}
-
-static int camelot_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-
- pr_debug("PCM data: addr 0x%08lx len %d\n",
- (u32)runtime->dma_addr, runtime->dma_bytes);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGATXTCR) = runtime->dma_bytes;
- } else {
- BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGARXTCR) = runtime->dma_bytes;
- }
-
- return 0;
-}
-
-static inline void dmabrg_play_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: XFER start, auto-addr-reload */
- BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD;
-}
-
-static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data transmission */
- BRGREG(BRGACR) = acr | ACR_TDS;
-}
-
-static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: recv start, auto-reload */
- BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD;
-}
-
-static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data receiver */
- BRGREG(BRGACR) = acr | ACR_RDS;
-}
-
-static int camelot_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (recv)
- dmabrg_rec_dma_start(cam);
- else
- dmabrg_play_dma_start(cam);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (recv)
- dmabrg_rec_dma_stop(cam);
- else
- dmabrg_play_dma_stop(cam);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- unsigned long pos;
-
- /* cannot use the DMABRG pointer register: under load, by the
- * time ALSA comes around to read the register, it is already
- * far ahead (or worse, already done with the fragment) of the
- * position at the time the IRQ was triggered, which results in
- * fast-playback sound in my test application (ScummVM)
- */
- if (recv)
- pos = cam->rx_period ? cam->rx_period_size : 0;
- else
- pos = cam->tx_period ? cam->tx_period_size : 0;
-
- return bytes_to_frames(runtime, pos);
-}
-
-static int camelot_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_pcm *pcm = rtd->pcm;
-
- /* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
- * in MMAP mode (i.e. aplay -M)
- */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- DMABRG_PREALLOC_BUFFER, DMABRG_PREALLOC_BUFFER_MAX);
-
- return 0;
-}
-
-static const struct snd_soc_component_driver sh7760_soc_component = {
- .open = camelot_pcm_open,
- .close = camelot_pcm_close,
- .hw_params = camelot_hw_params,
- .prepare = camelot_prepare,
- .trigger = camelot_trigger,
- .pointer = camelot_pos,
- .pcm_construct = camelot_pcm_new,
-};
-
-static int sh7760_soc_platform_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh7760_soc_component,
- NULL, 0);
-}
-
-static struct platform_driver sh7760_pcm_driver = {
- .driver = {
- .name = "sh7760-pcm-audio",
- },
-
- .probe = sh7760_soc_platform_probe,
-};
-
-module_platform_driver(sh7760_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index f3edc2e3d9d7c4..c599070f2210f4 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1372,16 +1372,7 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
{
int is_play = fsi_stream_is_play(fsi, io);
-#ifdef CONFIG_SUPERH
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- io->chan = dma_request_channel(mask, shdma_chan_filter,
- (void *)io->dma_id);
-#else
io->chan = dma_request_slave_channel(dev, is_play ? "tx" : "rx");
-#endif
if (io->chan) {
struct dma_slave_config cfg = {};
int ret;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
deleted file mode 100644
index 46d145cbaf2970..00000000000000
--- a/sound/soc/sh/hac.c
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Hitachi Audio Controller (AC97) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable HAC output pins!
-
-/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use. You'll have
- * to edit the code a bit to use the other AC97 unit. --mlau
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-/* regs and bits */
-#define HACCR 0x08
-#define HACCSAR 0x20
-#define HACCSDR 0x24
-#define HACPCML 0x28
-#define HACPCMR 0x2C
-#define HACTIER 0x50
-#define HACTSR 0x54
-#define HACRIER 0x58
-#define HACRSR 0x5C
-#define HACACR 0x60
-
-#define CR_CR (1 << 15) /* "codec-ready" indicator */
-#define CR_CDRT (1 << 11) /* cold reset */
-#define CR_WMRT (1 << 10) /* warm reset */
-#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
-#define CR_ST (1 << 5) /* AC97 link start bit */
-
-#define CSAR_RD (1 << 19) /* AC97 data read bit */
-#define CSAR_WR (0)
-
-#define TSR_CMDAMT (1 << 31)
-#define TSR_CMDDMT (1 << 30)
-
-#define RSR_STARY (1 << 22)
-#define RSR_STDRY (1 << 21)
-
-#define ACR_DMARX16 (1 << 30)
-#define ACR_DMATX16 (1 << 29)
-#define ACR_TX12ATOM (1 << 26)
-#define ACR_DMARX20 ((1 << 24) | (1 << 22))
-#define ACR_DMATX20 ((1 << 23) | (1 << 21))
-
-#define CSDR_SHIFT 4
-#define CSDR_MASK (0xffff << CSDR_SHIFT)
-#define CSAR_SHIFT 12
-#define CSAR_MASK (0x7f << CSAR_SHIFT)
-
-#define AC97_WRITE_RETRY 1
-#define AC97_READ_RETRY 5
-
-/* manual-suggested AC97 codec access timeouts (us) */
-#define TMO_E1 500 /* 21 < E1 < 1000 */
-#define TMO_E2 13 /* 13 < E2 */
-#define TMO_E3 21 /* 21 < E3 */
-#define TMO_E4 500 /* 21 < E4 < 1000 */
-
-struct hac_priv {
- unsigned long mmio; /* HAC base address */
-} hac_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE240000,
- },
- {
- .mmio = 0xFE250000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE40000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
-
-/*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
-static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
- unsigned short *v)
-{
- unsigned int to1, to2, i;
- unsigned short adr;
-
- for (i = AC97_READ_RETRY; i; i--) {
- *v = 0;
- /* wait for HAC to receive something from the codec */
- for (to1 = TMO_E4;
- to1 && !(HACREG(HACRSR) & RSR_STARY);
- --to1)
- udelay(1);
- for (to2 = TMO_E4;
- to2 && !(HACREG(HACRSR) & RSR_STDRY);
- --to2)
- udelay(1);
-
- if (!to1 && !to2)
- return 0; /* codec comm is down */
-
- adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
- *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
-
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-
- if (r == adr)
- break;
-
- /* manual says: wait at least 21 usec before retrying */
- udelay(21);
- }
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- return i;
-}
-
-static unsigned short hac_read_codec_aux(struct hac_priv *hac,
- unsigned short reg)
-{
- unsigned short val;
- unsigned int i, to;
-
- for (i = AC97_READ_RETRY; i; i--) {
- /* send_read_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDAMT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
- local_irq_enable();
-
- for (to = TMO_E3;
- to && !(HACREG(HACTSR) & TSR_CMDAMT);
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~TSR_CMDAMT;
- val = 0;
- if (hac_get_codec_data(hac, reg, &val) != 0)
- break;
- }
-
- return i ? val : ~0;
-}
-
-static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int i, to;
- /* write_codec_aux */
- for (i = AC97_WRITE_RETRY; i; i--) {
- /* send_write_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
- HACREG(HACCSDR) = (val << CSDR_SHIFT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
- local_irq_enable();
-
- /* poll-wait for CMDAMT and CMDDMT */
- for (to = TMO_E1;
- to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
- if (to)
- break;
- /* timeout, try again */
- }
-}
-
-static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- return hac_read_codec_aux(hac, reg);
-}
-
-static void hac_ac97_warmrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int tmo;
-
- HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
- msleep(10);
- HACREG(HACCR) = CR_ST | CR_B9;
- for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
- udelay(1);
-
- if (!tmo)
- printk(KERN_INFO "hac: reset: AC97 link down!\n");
- /* settings this bit lets us have a conversation with codec */
- HACREG(HACACR) |= ACR_TX12ATOM;
-}
-
-static void hac_ac97_coldrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac;
- hac = &hac_cpu_data[unit_id];
-
- HACREG(HACCR) = 0;
- HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
- msleep(10);
- hac_ac97_warmrst(ac97);
-}
-
-static struct snd_ac97_bus_ops hac_ac97_ops = {
- .read = hac_ac97_read,
- .write = hac_ac97_write,
- .reset = hac_ac97_coldrst,
- .warm_reset = hac_ac97_warmrst,
-};
-
-static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct hac_priv *hac = &hac_cpu_data[dai->id];
- int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- switch (params->msbits) {
- case 16:
- HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
- HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
- break;
- case 20:
- HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
- HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
- break;
- default:
- pr_debug("hac: invalid depth %d bit\n", params->msbits);
- return -EINVAL;
- break;
- }
-
- return 0;
-}
-
-#define AC97_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-#define AC97_FMTS \
- SNDRV_PCM_FMTBIT_S16_LE
-
-static const struct snd_soc_dai_ops hac_dai_ops = {
- .hw_params = hac_hw_params,
-};
-
-static struct snd_soc_dai_driver sh4_hac_dai[] = {
-{
- .name = "hac-dai.0",
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "hac-dai.1",
- .id = 1,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_hac_component = {
- .name = "sh4-hac",
- .legacy_dai_naming = 1,
-};
-
-static int hac_soc_platform_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
- if (ret != 0)
- return ret;
-
- return devm_snd_soc_register_component(&pdev->dev, &sh4_hac_component,
- sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
-}
-
-static int hac_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_set_ac97_ops(NULL);
- return 0;
-}
-
-static struct platform_driver hac_pcm_driver = {
- .driver = {
- .name = "hac-pcm-audio",
- },
-
- .probe = hac_soc_platform_probe,
- .remove = hac_soc_platform_remove,
-};
-
-module_platform_driver(hac_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
deleted file mode 100644
index 7082c12d3bf238..00000000000000
--- a/sound/soc/sh/migor.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// ALSA SoC driver for Migo-R
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-#include <linux/clkdev.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-
-#include <cpu/sh7722.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "../codecs/wm8978.h"
-#include "siu.h"
-
-/* Default 8000Hz sampling frequency */
-static unsigned long codec_freq = 8000 * 512;
-
-static unsigned int use_count;
-
-/* External clock, sourced from the codec at the SIUMCKB pin */
-static unsigned long siumckb_recalc(struct clk *clk)
-{
- return codec_freq;
-}
-
-static struct sh_clk_ops siumckb_clk_ops = {
- .recalc = siumckb_recalc,
-};
-
-static struct clk siumckb_clk = {
- .ops = &siumckb_clk_ops,
- .rate = 0, /* initialised at run-time */
-};
-
-static struct clk_lookup *siumckb_lookup;
-
-static int migor_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- int ret;
- unsigned int rate = params_rate(params);
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
- if (ret < 0)
- return ret;
-
- codec_freq = rate * 512;
- /*
- * This propagates the parent frequency change to children and
- * recalculates the frequency table
- */
- clk_set_rate(&siumckb_clk, codec_freq);
- dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
-
- ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
- codec_freq / 2, SND_SOC_CLOCK_IN);
-
- if (!ret)
- use_count++;
-
- return ret;
-}
-
-static int migor_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-
- if (use_count) {
- use_count--;
-
- if (!use_count)
- snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
- SND_SOC_CLOCK_IN);
- } else {
- dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
- }
-
- return 0;
-}
-
-static const struct snd_soc_ops migor_dai_ops = {
- .hw_params = migor_hw_params,
- .hw_free = migor_hw_free,
-};
-
-static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
- SND_SOC_DAPM_HP("Headphone", NULL),
- SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
- SND_SOC_DAPM_MIC("External Microphone", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
- { "Headphone", NULL, "OUT4 VMID" },
- { "OUT4 VMID", NULL, "LHP" },
- { "OUT4 VMID", NULL, "RHP" },
-
- /* On-board microphone */
- { "RMICN", NULL, "Mic Bias" },
- { "RMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "Onboard Microphone" },
-
- /* External microphone */
- { "LMICN", NULL, "Mic Bias" },
- { "LMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "External Microphone" },
-};
-
-/* migor digital audio interface glue - connects codec <--> CPU */
-SND_SOC_DAILINK_DEFS(wm8978,
- DAILINK_COMP_ARRAY(COMP_CPU("siu-pcm-audio")),
- DAILINK_COMP_ARRAY(COMP_CODEC("wm8978.0-001a", "wm8978-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("siu-pcm-audio")));
-
-static struct snd_soc_dai_link migor_dai = {
- .name = "wm8978",
- .stream_name = "WM8978",
- .dai_fmt = SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBS_CFS,
- .ops = &migor_dai_ops,
- SND_SOC_DAILINK_REG(wm8978),
-};
-
-/* migor audio machine driver */
-static struct snd_soc_card snd_soc_migor = {
- .name = "Migo-R",
- .owner = THIS_MODULE,
- .dai_link = &migor_dai,
- .num_links = 1,
-
- .dapm_widgets = migor_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(migor_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
-static struct platform_device *migor_snd_device;
-
-static int __init migor_init(void)
-{
- int ret;
-
- ret = clk_register(&siumckb_clk);
- if (ret < 0)
- return ret;
-
- siumckb_lookup = clkdev_create(&siumckb_clk, "siumckb_clk", NULL);
- if (!siumckb_lookup) {
- ret = -ENOMEM;
- goto eclkdevalloc;
- }
-
- /* Port number used on this machine: port B */
- migor_snd_device = platform_device_alloc("soc-audio", 1);
- if (!migor_snd_device) {
- ret = -ENOMEM;
- goto epdevalloc;
- }
-
- platform_set_drvdata(migor_snd_device, &snd_soc_migor);
-
- ret = platform_device_add(migor_snd_device);
- if (ret)
- goto epdevadd;
-
- return 0;
-
-epdevadd:
- platform_device_put(migor_snd_device);
-epdevalloc:
- clkdev_drop(siumckb_lookup);
-eclkdevalloc:
- clk_unregister(&siumckb_clk);
- return ret;
-}
-
-static void __exit migor_exit(void)
-{
- clkdev_drop(siumckb_lookup);
- clk_unregister(&siumckb_clk);
- platform_device_unregister(migor_snd_device);
-}
-
-module_init(migor_init);
-module_exit(migor_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("ALSA SoC Migor");
-MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
deleted file mode 100644
index d267243a159ba6..00000000000000
--- a/sound/soc/sh/sh7760-ac97.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Generic AC97 sound support for SH7760
-//
-// (c) 2007 Manuel Lauss
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define IPSEL 0xFE400034
-
-SND_SOC_DAILINK_DEFS(ac97,
- DAILINK_COMP_ARRAY(COMP_CPU("hac-dai.0")), /* HAC0 */
- DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("sh7760-pcm-audio")));
-
-static struct snd_soc_dai_link sh7760_ac97_dai = {
- .name = "AC97",
- .stream_name = "AC97 HiFi",
- SND_SOC_DAILINK_REG(ac97),
-};
-
-static struct snd_soc_card sh7760_ac97_soc_machine = {
- .name = "SH7760 AC97",
- .owner = THIS_MODULE,
- .dai_link = &sh7760_ac97_dai,
- .num_links = 1,
-};
-
-static struct platform_device *sh7760_ac97_snd_device;
-
-static int __init sh7760_ac97_init(void)
-{
- int ret;
- unsigned short ipsel;
-
- /* enable both AC97 controllers in pinmux reg */
- ipsel = __raw_readw(IPSEL);
- __raw_writew(ipsel | (3 << 10), IPSEL);
-
- ret = -ENOMEM;
- sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1);
- if (!sh7760_ac97_snd_device)
- goto out;
-
- platform_set_drvdata(sh7760_ac97_snd_device,
- &sh7760_ac97_soc_machine);
- ret = platform_device_add(sh7760_ac97_snd_device);
-
- if (ret)
- platform_device_put(sh7760_ac97_snd_device);
-
-out:
- return ret;
-}
-
-static void __exit sh7760_ac97_exit(void)
-{
- platform_device_unregister(sh7760_ac97_snd_device);
-}
-
-module_init(sh7760_ac97_init);
-module_exit(sh7760_ac97_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
deleted file mode 100644
index a675c36fc9d956..00000000000000
--- a/sound/soc/sh/siu.h
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#ifndef SIU_H
-#define SIU_H
-
-/* Common kernel and user-space firmware-building defines and types */
-
-#define YRAM0_SIZE (0x0040 / 4) /* 16 */
-#define YRAM1_SIZE (0x0080 / 4) /* 32 */
-#define YRAM2_SIZE (0x0040 / 4) /* 16 */
-#define YRAM3_SIZE (0x0080 / 4) /* 32 */
-#define YRAM4_SIZE (0x0080 / 4) /* 32 */
-#define YRAM_DEF_SIZE (YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
- YRAM3_SIZE + YRAM4_SIZE)
-#define YRAM_FIR_SIZE (0x0400 / 4) /* 256 */
-#define YRAM_IIR_SIZE (0x0200 / 4) /* 128 */
-
-#define XRAM0_SIZE (0x0400 / 4) /* 256 */
-#define XRAM1_SIZE (0x0200 / 4) /* 128 */
-#define XRAM2_SIZE (0x0200 / 4) /* 128 */
-
-/* PRAM program array size */
-#define PRAM0_SIZE (0x0100 / 4) /* 64 */
-#define PRAM1_SIZE ((0x2000 - 0x0100) / 4) /* 1984 */
-
-#include <linux/types.h>
-
-struct siu_spb_param {
- __u32 ab1a; /* input FIFO address */
- __u32 ab0a; /* output FIFO address */
- __u32 dir; /* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
- __u32 event; /* SPB program starting conditions */
- __u32 stfifo; /* STFIFO register setting value */
- __u32 trdat; /* TRDAT register setting value */
-};
-
-struct siu_firmware {
- __u32 yram_fir_coeff[YRAM_FIR_SIZE];
- __u32 pram0[PRAM0_SIZE];
- __u32 pram1[PRAM1_SIZE];
- __u32 yram0[YRAM0_SIZE];
- __u32 yram1[YRAM1_SIZE];
- __u32 yram2[YRAM2_SIZE];
- __u32 yram3[YRAM3_SIZE];
- __u32 yram4[YRAM4_SIZE];
- __u32 spbpar_num;
- struct siu_spb_param spbpar[32];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sh_dma.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#define SIU_PERIOD_BYTES_MAX 8192 /* DMA transfer/period size */
-#define SIU_PERIOD_BYTES_MIN 256 /* DMA transfer/period size */
-#define SIU_PERIODS_MAX 64 /* Max periods in buffer */
-#define SIU_PERIODS_MIN 4 /* Min periods in buffer */
-#define SIU_BUFFER_BYTES_MAX (SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
-
-/* SIU ports: only one can be used at a time */
-enum {
- SIU_PORT_A,
- SIU_PORT_B,
- SIU_PORT_NUM,
-};
-
-/* SIU clock configuration */
-enum {
- SIU_CLKA_PLL,
- SIU_CLKA_EXT,
- SIU_CLKB_PLL,
- SIU_CLKB_EXT
-};
-
-struct device;
-struct siu_info {
- struct device *dev;
- int port_id;
- u32 __iomem *pram;
- u32 __iomem *xram;
- u32 __iomem *yram;
- u32 __iomem *reg;
- struct siu_firmware fw;
-};
-
-struct siu_stream {
- struct work_struct work;
- struct snd_pcm_substream *substream;
- snd_pcm_format_t format;
- size_t buf_bytes;
- size_t period_bytes;
- int cur_period; /* Period currently in dma */
- u32 volume;
- snd_pcm_sframes_t xfer_cnt; /* Number of frames */
- u8 rw_flg; /* transfer status */
- /* DMA status */
- struct dma_chan *chan; /* DMA channel */
- struct dma_async_tx_descriptor *tx_desc;
- dma_cookie_t cookie;
- struct sh_dmae_slave param;
-};
-
-struct siu_port {
- unsigned long play_cap; /* Used to track full duplex */
- struct snd_pcm *pcm;
- struct siu_stream playback;
- struct siu_stream capture;
- u32 stfifo; /* STFIFO value from firmware */
- u32 trdat; /* TRDAT value from firmware */
-};
-
-extern struct siu_port *siu_ports[SIU_PORT_NUM];
-
-static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
-{
- struct platform_device *pdev =
- to_platform_device(substream->pcm->card->dev);
- return siu_ports[pdev->id];
-}
-
-/* Register access */
-static inline void siu_write32(u32 __iomem *addr, u32 val)
-{
- __raw_writel(val, addr);
-}
-
-static inline u32 siu_read32(u32 __iomem *addr)
-{
- return __raw_readl(addr);
-}
-
-/* SIU registers */
-#define SIU_IFCTL (0x000 / sizeof(u32))
-#define SIU_SRCTL (0x004 / sizeof(u32))
-#define SIU_SFORM (0x008 / sizeof(u32))
-#define SIU_CKCTL (0x00c / sizeof(u32))
-#define SIU_TRDAT (0x010 / sizeof(u32))
-#define SIU_STFIFO (0x014 / sizeof(u32))
-#define SIU_DPAK (0x01c / sizeof(u32))
-#define SIU_CKREV (0x020 / sizeof(u32))
-#define SIU_EVNTC (0x028 / sizeof(u32))
-#define SIU_SBCTL (0x040 / sizeof(u32))
-#define SIU_SBPSET (0x044 / sizeof(u32))
-#define SIU_SBFSTS (0x068 / sizeof(u32))
-#define SIU_SBDVCA (0x06c / sizeof(u32))
-#define SIU_SBDVCB (0x070 / sizeof(u32))
-#define SIU_SBACTIV (0x074 / sizeof(u32))
-#define SIU_DMAIA (0x090 / sizeof(u32))
-#define SIU_DMAIB (0x094 / sizeof(u32))
-#define SIU_DMAOA (0x098 / sizeof(u32))
-#define SIU_DMAOB (0x09c / sizeof(u32))
-#define SIU_DMAML (0x0a0 / sizeof(u32))
-#define SIU_SPSTS (0x0cc / sizeof(u32))
-#define SIU_SPCTL (0x0d0 / sizeof(u32))
-#define SIU_BRGASEL (0x100 / sizeof(u32))
-#define SIU_BRRA (0x104 / sizeof(u32))
-#define SIU_BRGBSEL (0x108 / sizeof(u32))
-#define SIU_BRRB (0x10c / sizeof(u32))
-
-extern const struct snd_soc_component_driver siu_component;
-extern struct siu_info *siu_i2s_data;
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
-void siu_free_port(struct siu_port *port_info);
-
-#endif
-
-#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
deleted file mode 100644
index f2a386fcd92e4d..00000000000000
--- a/sound/soc/sh/siu_dai.c
+++ /dev/null
@@ -1,799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/siu.h>
-
-#include <sound/control.h>
-#include <sound/soc.h>
-
-#include "siu.h"
-
-/* Board specifics */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SIU_MAX_VOLUME 0x1000
-#else
-# define SIU_MAX_VOLUME 0x7fff
-#endif
-
-#define PRAM_SIZE 0x2000
-#define XRAM_SIZE 0x800
-#define YRAM_SIZE 0x800
-
-#define XRAM_OFFSET 0x4000
-#define YRAM_OFFSET 0x6000
-#define REG_OFFSET 0xc000
-
-#define PLAYBACK_ENABLED 1
-#define CAPTURE_ENABLED 2
-
-#define VOLUME_CAPTURE 0
-#define VOLUME_PLAYBACK 1
-#define DFLT_VOLUME_LEVEL 0x08000800
-
-/*
- * SPDIF is only available on port A and on some SIU implementations it is only
- * available for input. Due to the lack of hardware to test it, SPDIF is left
- * disabled in this driver version
- */
-struct format_flag {
- u32 i2s;
- u32 pcm;
- u32 spdif;
- u32 mask;
-};
-
-struct port_flag {
- struct format_flag playback;
- struct format_flag capture;
-};
-
-struct siu_info *siu_i2s_data;
-
-static struct port_flag siu_flags[SIU_PORT_NUM] = {
- [SIU_PORT_A] = {
- .playback = {
- .i2s = 0x50000000,
- .pcm = 0x40000000,
- .spdif = 0x80000000, /* not on all SIU versions */
- .mask = 0xd0000000,
- },
- .capture = {
- .i2s = 0x05000000,
- .pcm = 0x04000000,
- .spdif = 0x08000000,
- .mask = 0x0d000000,
- },
- },
- [SIU_PORT_B] = {
- .playback = {
- .i2s = 0x00500000,
- .pcm = 0x00400000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00500000,
- },
- .capture = {
- .i2s = 0x00050000,
- .pcm = 0x00040000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00050000,
- },
- },
-};
-
-static void siu_dai_start(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- /* Issue software reset to siu */
- siu_write32(base + SIU_SRCTL, 0);
-
- /* Wait for the reset to take effect */
- udelay(1);
-
- port_info->stfifo = 0;
- port_info->trdat = 0;
-
- /* portA, portB, SIU operate */
- siu_write32(base + SIU_SRCTL, 0x301);
-
- /* portA=256fs, portB=256fs */
- siu_write32(base + SIU_CKCTL, 0x40400000);
-
- /* portA's BRG does not divide SIUCKA */
- siu_write32(base + SIU_BRGASEL, 0);
- siu_write32(base + SIU_BRRA, 0);
-
- /* portB's BRG divides SIUCKB by half */
- siu_write32(base + SIU_BRGBSEL, 1);
- siu_write32(base + SIU_BRRB, 0);
-
- siu_write32(base + SIU_IFCTL, 0x44440000);
-
- /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
- siu_write32(base + SIU_SFORM, 0x0c0c0000);
-
- /*
- * Volume levels: looks like the DSP firmware implements volume controls
- * differently from what's described in the datasheet
- */
- siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
- siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
-}
-
-static void siu_dai_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- /* SIU software reset */
- siu_write32(base + SIU_SRCTL, 0);
-}
-
-static void siu_dai_spbAselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path A use */
- if (!info->port_id)
- idx = 1; /* portA */
- else
- idx = 2; /* portB */
-
- ydef[0] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) |
- (fw->spbpar[idx].dir << 7) | 3;
- ydef[1] = fw->yram0[1]; /* 0x03000300 */
- ydef[2] = (16 / 2) << 24;
- ydef[3] = fw->yram0[3]; /* 0 */
- ydef[4] = fw->yram0[4]; /* 0 */
- ydef[7] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_spbBselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path B use */
- if (!info->port_id)
- idx = 7; /* portA */
- else
- idx = 8; /* portB */
-
- ydef[5] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) | 1;
- ydef[6] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_open(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 srctl, ifctl;
-
- srctl = siu_read32(base + SIU_SRCTL);
- ifctl = siu_read32(base + SIU_IFCTL);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- /* portA operates */
- srctl |= 0x200;
- ifctl &= ~0xc2;
- break;
- case SIU_PORT_B:
- /* portB operates */
- srctl |= 0x100;
- ifctl &= ~0x31;
- break;
- }
-
- siu_write32(base + SIU_SRCTL, srctl);
- /* Unmute and configure portA */
- siu_write32(base + SIU_IFCTL, ifctl);
-}
-
-/*
- * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
- * packing is supported
- */
-static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 dpak;
-
- dpak = siu_read32(base + SIU_DPAK);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- dpak &= ~0xc0000000;
- break;
- case SIU_PORT_B:
- dpak &= ~0x00c00000;
- break;
- }
-
- siu_write32(base + SIU_DPAK, dpak);
-}
-
-static int siu_dai_spbstart(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- int cnt;
- u32 __iomem *add;
- u32 *ptr;
-
- /* Load SPB Program in PRAM */
- ptr = fw->pram0;
- add = info->pram;
- for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- ptr = fw->pram1;
- add = info->pram + (0x0100 / sizeof(u32));
- for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- /* XRAM initialization */
- add = info->xram;
- for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- /* YRAM variable area initialization */
- add = info->yram;
- for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
- siu_write32(add, ydef[cnt]);
-
- /* YRAM FIR coefficient area initialization */
- add = info->yram + (0x0200 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
- siu_write32(add, fw->yram_fir_coeff[cnt]);
-
- /* YRAM IIR coefficient area initialization */
- add = info->yram + (0x0600 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- siu_write32(base + SIU_TRDAT, port_info->trdat);
- port_info->trdat = 0x0;
-
-
- /* SPB start condition: software */
- siu_write32(base + SIU_SBACTIV, 0);
- /* Start SPB */
- siu_write32(base + SIU_SBCTL, 0xc0000000);
- /* Wait for program to halt */
- cnt = 0x10000;
- while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
- cpu_relax();
-
- if (!cnt)
- return -EBUSY;
-
- /* SPB program start address setting */
- siu_write32(base + SIU_SBPSET, 0x00400000);
- /* SPB hardware start(FIFOCTL source) */
- siu_write32(base + SIU_SBACTIV, 0xc0000000);
-
- return 0;
-}
-
-static void siu_dai_spbstop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- siu_write32(base + SIU_SBACTIV, 0);
- /* SPB stop */
- siu_write32(base + SIU_SBCTL, 0);
-
- port_info->stfifo = 0;
-}
-
-/* API functions */
-
-/* Playback and capture hardware properties are identical */
-static const struct snd_pcm_hardware siu_dai_pcm_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
- .period_bytes_min = SIU_PERIOD_BYTES_MIN,
- .period_bytes_max = SIU_PERIOD_BYTES_MAX,
- .periods_min = SIU_PERIODS_MIN,
- .periods_max = SIU_PERIODS_MAX,
-};
-
-static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_info *uinfo)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = SIU_MAX_VOLUME;
-
- return 0;
-}
-
-static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- u32 vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- vol = port_info->playback.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- vol = port_info->capture.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 new_vol;
- u32 cur_vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
- ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
- return -EINVAL;
-
- new_vol = ucontrol->value.integer.value[0] |
- ucontrol->value.integer.value[1] << 16;
-
- /* See comment above - DSP firmware implementation */
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- cur_vol = port_info->playback.volume;
- siu_write32(base + SIU_SBDVCA, new_vol);
- port_info->playback.volume = new_vol;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- cur_vol = port_info->capture.volume;
- siu_write32(base + SIU_SBDVCB, new_vol);
- port_info->capture.volume = new_vol;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- if (cur_vol != new_vol)
- return 1;
-
- return 0;
-}
-
-static const struct snd_kcontrol_new playback_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_PLAYBACK,
-};
-
-static const struct snd_kcontrol_new capture_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Capture Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_CAPTURE,
-};
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
-{
- struct device *dev = card->dev;
- struct snd_kcontrol *kctrl;
- int ret;
-
- *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
- if (!*port_info)
- return -ENOMEM;
-
- dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
-
- (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
- (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
-
- /*
- * Add mixer support. The SPB is used to change the volume. Both
- * ports use the same SPB. Therefore, we only register one
- * control instance since it will be used by both channels.
- * In error case we continue without controls.
- */
- kctrl = snd_ctl_new1(&playback_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add playback controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- kctrl = snd_ctl_new1(&capture_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add capture controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- return 0;
-}
-
-void siu_free_port(struct siu_port *port_info)
-{
- kfree(port_info);
-}
-
-static int siu_dai_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- int ret;
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
-
- ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
- if (unlikely(ret < 0))
- return ret;
-
- siu_dai_start(port_info);
-
- return 0;
-}
-
-static void siu_dai_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- port_info->play_cap &= ~PLAYBACK_ENABLED;
- else
- port_info->play_cap &= ~CAPTURE_ENABLED;
-
- /* Stop the siu if the other stream is not using it */
- if (!port_info->play_cap) {
- /* during stmread or stmwrite ? */
- if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
- return;
- siu_dai_spbstop(port_info);
- siu_dai_stop(port_info);
- }
-}
-
-/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
-static int siu_dai_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- struct siu_stream *siu_stream;
- int self, ret;
-
- dev_dbg(substream->pcm->card->dev,
- "%s: port %d, active streams %lx, %d channels\n",
- __func__, info->port_id, port_info->play_cap, rt->channels);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- self = PLAYBACK_ENABLED;
- siu_stream = &port_info->playback;
- } else {
- self = CAPTURE_ENABLED;
- siu_stream = &port_info->capture;
- }
-
- /* Set up the siu if not already done */
- if (!port_info->play_cap) {
- siu_stream->rw_flg = 0; /* stream-data transfer flag */
-
- siu_dai_spbAselect(port_info);
- siu_dai_spbBselect(port_info);
-
- siu_dai_open(siu_stream);
-
- siu_dai_pcmdatapack(siu_stream);
-
- ret = siu_dai_spbstart(port_info);
- if (ret < 0)
- goto fail;
- } else {
- ret = 0;
- }
-
- port_info->play_cap |= self;
-
-fail:
- return ret;
-}
-
-/*
- * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
- * capture, however, the current API sets the bus format globally for a DAI.
- */
-static int siu_dai_set_fmt(struct snd_soc_dai *dai,
- unsigned int fmt)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- u32 __iomem *base = info->reg;
- u32 ifctl;
-
- dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
- __func__, fmt, info->port_id);
-
- if (info->port_id < 0)
- return -ENODEV;
-
- /* Here select between I2S / PCM / SPDIF */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- ifctl = siu_flags[info->port_id].playback.i2s |
- siu_flags[info->port_id].capture.i2s;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ifctl = siu_flags[info->port_id].playback.pcm |
- siu_flags[info->port_id].capture.pcm;
- break;
- /* SPDIF disabled - see comment at the top */
- default:
- return -EINVAL;
- }
-
- ifctl |= ~(siu_flags[info->port_id].playback.mask |
- siu_flags[info->port_id].capture.mask) &
- siu_read32(base + SIU_IFCTL);
- siu_write32(base + SIU_IFCTL, ifctl);
-
- return 0;
-}
-
-static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct clk *siu_clk, *parent_clk;
- char *siu_name, *parent_name;
- int ret;
-
- if (dir != SND_SOC_CLOCK_IN)
- return -EINVAL;
-
- dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
-
- switch (clk_id) {
- case SIU_CLKA_PLL:
- siu_name = "siua_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKA_EXT:
- siu_name = "siua_clk";
- parent_name = "siumcka_clk";
- break;
- case SIU_CLKB_PLL:
- siu_name = "siub_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKB_EXT:
- siu_name = "siub_clk";
- parent_name = "siumckb_clk";
- break;
- default:
- return -EINVAL;
- }
-
- siu_clk = clk_get(dai->dev, siu_name);
- if (IS_ERR(siu_clk)) {
- dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
- PTR_ERR(siu_clk));
- return PTR_ERR(siu_clk);
- }
-
- parent_clk = clk_get(dai->dev, parent_name);
- if (IS_ERR(parent_clk)) {
- ret = PTR_ERR(parent_clk);
- dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
- goto epclkget;
- }
-
- ret = clk_set_parent(siu_clk, parent_clk);
- if (ret < 0) {
- dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
- goto eclksetp;
- }
-
- ret = clk_set_rate(siu_clk, freq);
- if (ret < 0)
- dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
-
- /* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
-eclksetp:
- clk_put(parent_clk);
-epclkget:
- clk_put(siu_clk);
-
- return ret;
-}
-
-static const struct snd_soc_dai_ops siu_dai_ops = {
- .startup = siu_dai_startup,
- .shutdown = siu_dai_shutdown,
- .prepare = siu_dai_prepare,
- .set_sysclk = siu_dai_set_sysclk,
- .set_fmt = siu_dai_set_fmt,
-};
-
-static struct snd_soc_dai_driver siu_i2s_dai = {
- .name = "siu-i2s-dai",
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .ops = &siu_dai_ops,
-};
-
-static int siu_probe(struct platform_device *pdev)
-{
- const struct firmware *fw_entry;
- struct resource *res, *region;
- struct siu_info *info;
- int ret;
-
- info = devm_kmalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- siu_i2s_data = info;
- info->dev = &pdev->dev;
-
- ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
- if (ret)
- return ret;
-
- /*
- * Loaded firmware is "const" - read only, but we have to modify it in
- * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
- */
- memcpy(&info->fw, fw_entry->data, fw_entry->size);
-
- release_firmware(fw_entry);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- region = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "SIU region already claimed\n");
- return -EBUSY;
- }
-
- info->pram = devm_ioremap(&pdev->dev, res->start, PRAM_SIZE);
- if (!info->pram)
- return -ENOMEM;
- info->xram = devm_ioremap(&pdev->dev, res->start + XRAM_OFFSET,
- XRAM_SIZE);
- if (!info->xram)
- return -ENOMEM;
- info->yram = devm_ioremap(&pdev->dev, res->start + YRAM_OFFSET,
- YRAM_SIZE);
- if (!info->yram)
- return -ENOMEM;
- info->reg = devm_ioremap(&pdev->dev, res->start + REG_OFFSET,
- resource_size(res) - REG_OFFSET);
- if (!info->reg)
- return -ENOMEM;
-
- dev_set_drvdata(&pdev->dev, info);
-
- /* register using ARRAY version so we can keep dai name */
- ret = devm_snd_soc_register_component(&pdev->dev, &siu_component,
- &siu_i2s_dai, 1);
- if (ret < 0)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int siu_remove(struct platform_device *pdev)
-{
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver siu_driver = {
- .driver = {
- .name = "siu-pcm-audio",
- },
- .probe = siu_probe,
- .remove = siu_remove,
-};
-
-module_platform_driver(siu_driver);
-
-MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
-MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
deleted file mode 100644
index f15ff36e793455..00000000000000
--- a/sound/soc/sh/siu_pcm.c
+++ /dev/null
@@ -1,553 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <sound/control.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/siu.h>
-
-#include "siu.h"
-
-#define DRV_NAME "siu-i2s"
-#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
- ((buf_bytes) / (period_bytes))
-#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
- ((buf_addr) + ((period_num) * (period_bytes)))
-
-#define RWF_STM_RD 0x01 /* Read in progress */
-#define RWF_STM_WT 0x02 /* Write in progress */
-
-struct siu_port *siu_ports[SIU_PORT_NUM];
-
-/* transfersize is number of u32 dma transfers per period */
-static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* output FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
- pr_debug("%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x0c180c18);
-
- /* during stmwrite clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static int siu_pcm_stmwrite_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->playback;
-
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- port_info->playback.cur_period = 0;
-
- /* during stmwrite flag set */
- siu_stream->rw_flg = RWF_STM_WT;
-
- /* DMA transfer start */
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static void siu_dma_tx_complete(void *arg)
-{
- struct siu_stream *siu_stream = arg;
-
- if (!siu_stream->rw_flg)
- return;
-
- /* Update completed period count */
- if (++siu_stream->cur_period >=
- GET_MAX_PERIODS(siu_stream->buf_bytes,
- siu_stream->period_bytes))
- siu_stream->cur_period = 0;
-
- pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
- __func__, siu_stream->cur_period,
- siu_stream->cur_period * siu_stream->period_bytes,
- siu_stream->buf_bytes, siu_stream->cookie);
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- /* Notify alsa: a period is done */
- snd_pcm_period_elapsed(siu_stream->substream);
-}
-
-static int siu_pcm_wr_set(struct siu_port *port_info,
- dma_addr_t buff, u32 size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate a dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit a dma transfer\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only output FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
-
- return 0;
-}
-
-static int siu_pcm_rd_set(struct siu_port *port_info,
- dma_addr_t buff, size_t size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit dma descriptor\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only input FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
- (port_info->stfifo & 0x13071307));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x13071307));
-
- return 0;
-}
-
-static void siu_io_work(struct work_struct *work)
-{
- struct siu_stream *siu_stream = container_of(work, struct siu_stream,
- work);
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
-
- if (!siu_stream->rw_flg) {
- dev_dbg(dev, "%s: stream inactive\n", __func__);
- return;
- }
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- dma_addr_t buff;
- size_t count;
-
- buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes);
- count = siu_stream->period_bytes;
-
- /* DMA transfer start */
- siu_pcm_rd_set(port_info, buff, count);
- } else {
- siu_pcm_wr_set(port_info,
- (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes),
- siu_stream->period_bytes);
- }
-}
-
-/* Capture */
-static int siu_pcm_stmread_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->capture;
-
- if (siu_stream->xfer_cnt > 0x1000000)
- return -EINVAL;
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- siu_stream->cur_period = 0;
-
- /* during stmread flag set */
- siu_stream->rw_flg = RWF_STM_RD;
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static int siu_pcm_stmread_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct device *dev = siu_stream->substream->pcm->card->dev;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* input FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x13071307);
-
- /* during stmread flag clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static bool filter(struct dma_chan *chan, void *secondary)
-{
- struct sh_dmae_slave *param = secondary;
-
- pr_debug("%s: secondary ID %d\n", __func__, param->shdma_slave.slave_id);
-
- chan->private = ¶m->shdma_slave;
- return true;
-}
-
-static int siu_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- /* Playback / Capture */
- struct siu_platform *pdata = component->dev->platform_data;
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
- u32 port = info->port_id;
- struct device *dev = ss->pcm->card->dev;
- dma_cap_mask_t mask;
- struct sh_dmae_slave *param;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- siu_stream = &port_info->playback;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_tx_b :
- pdata->dma_slave_tx_a;
- } else {
- siu_stream = &port_info->capture;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_rx_b :
- pdata->dma_slave_rx_a;
- }
-
- /* Get DMA channel */
- siu_stream->chan = dma_request_channel(mask, filter, param);
- if (!siu_stream->chan) {
- dev_err(dev, "DMA channel allocation failed!\n");
- return -EBUSY;
- }
-
- siu_stream->substream = ss;
-
- return 0;
-}
-
-static int siu_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
-
- dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- dma_release_channel(siu_stream->chan);
- siu_stream->chan = NULL;
-
- siu_stream->substream = NULL;
-
- return 0;
-}
-
-static int siu_pcm_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct device *dev = ss->pcm->card->dev;
- struct snd_pcm_runtime *rt;
- struct siu_stream *siu_stream;
- snd_pcm_sframes_t xfer_cnt;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- rt = siu_stream->substream->runtime;
-
- siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
- siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
-
- dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
- info->port_id, rt->channels, siu_stream->period_bytes);
-
- /* We only support buffers that are multiples of the period */
- if (siu_stream->buf_bytes % siu_stream->period_bytes) {
- dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
- __func__, siu_stream->buf_bytes,
- siu_stream->period_bytes);
- return -EINVAL;
- }
-
- xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
- if (!xfer_cnt || xfer_cnt > 0x1000000)
- return -EINVAL;
-
- siu_stream->format = rt->format;
- siu_stream->xfer_cnt = xfer_cnt;
-
- dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
- "format=%d channels=%d xfer_cnt=%d\n", info->port_id,
- (unsigned long)rt->dma_addr, siu_stream->buf_bytes,
- siu_stream->period_bytes,
- siu_stream->format, rt->channels, (int)xfer_cnt);
-
- return 0;
-}
-
-static int siu_pcm_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *ss, int cmd)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- int ret;
-
- dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
- info->port_id, port_info, cmd);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ret = siu_pcm_stmwrite_start(port_info);
- else
- ret = siu_pcm_stmread_start(port_info);
-
- if (ret < 0)
- dev_warn(dev, "%s: start failed on port=%d\n",
- __func__, info->port_id);
-
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_pcm_stmwrite_stop(port_info);
- else
- siu_pcm_stmread_stop(port_info);
- ret = 0;
-
- break;
- default:
- dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * So far only resolution of one period is supported, subject to extending the
- * dmangine API
- */
-static snd_pcm_uframes_t
-siu_pcm_pointer_dma(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct device *dev = ss->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_port *port_info = siu_port_info(ss);
- struct snd_pcm_runtime *rt = ss->runtime;
- size_t ptr;
- struct siu_stream *siu_stream;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- /*
- * ptr is the offset into the buffer where the dma is currently at. We
- * check if the dma buffer has just wrapped.
- */
- ptr = PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes) - rt->dma_addr;
-
- dev_dbg(dev,
- "%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
- __func__, info->port_id, siu_read32(base + SIU_EVNTC),
- siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
- siu_stream->cookie);
-
- if (ptr >= siu_stream->buf_bytes)
- ptr = 0;
-
- return bytes_to_frames(ss->runtime, ptr);
-}
-
-static int siu_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- /* card->dev == socdev->dev, see snd_soc_new_pcms() */
- struct snd_card *card = rtd->card->snd_card;
- struct snd_pcm *pcm = rtd->pcm;
- struct siu_info *info = siu_i2s_data;
- struct platform_device *pdev = to_platform_device(card->dev);
- int ret;
- int i;
-
- /* pdev->id selects between SIUA and SIUB */
- if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
- return -EINVAL;
-
- info->port_id = pdev->id;
-
- /*
- * While the siu has 2 ports, only one port can be on at a time (only 1
- * SPB). So far all the boards using the siu had only one of the ports
- * wired to a codec. To simplify things, we only register one port with
- * alsa. In case both ports are needed, it should be changed here
- */
- for (i = pdev->id; i < pdev->id + 1; i++) {
- struct siu_port **port_info = &siu_ports[i];
-
- ret = siu_init_port(i, port_info, card);
- if (ret < 0)
- return ret;
-
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_DEV, card->dev,
- SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
-
- (*port_info)->pcm = pcm;
-
- /* IO works */
- INIT_WORK(&(*port_info)->playback.work, siu_io_work);
- INIT_WORK(&(*port_info)->capture.work, siu_io_work);
- }
-
- dev_info(card->dev, "SuperH SIU driver initialized.\n");
- return 0;
-}
-
-static void siu_pcm_free(struct snd_soc_component *component,
- struct snd_pcm *pcm)
-{
- struct platform_device *pdev = to_platform_device(pcm->card->dev);
- struct siu_port *port_info = siu_ports[pdev->id];
-
- cancel_work_sync(&port_info->capture.work);
- cancel_work_sync(&port_info->playback.work);
-
- siu_free_port(port_info);
-
- dev_dbg(pcm->card->dev, "%s\n", __func__);
-}
-
-const struct snd_soc_component_driver siu_component = {
- .name = DRV_NAME,
- .open = siu_pcm_open,
- .close = siu_pcm_close,
- .prepare = siu_pcm_prepare,
- .trigger = siu_pcm_trigger,
- .pointer = siu_pcm_pointer_dma,
- .pcm_construct = siu_pcm_new,
- .pcm_destruct = siu_pcm_free,
- .legacy_dai_naming = 1,
-};
-EXPORT_SYMBOL_GPL(siu_component);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
deleted file mode 100644
index 96cf523c227343..00000000000000
--- a/sound/soc/sh/ssi.c
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Serial Sound Interface (I2S) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable SSI output pins!
-
-/*
- * LIMITATIONS:
- * The SSI unit has only one physical data line, so full duplex is
- * impossible. This can be remedied on the SH7760 by using the
- * other SSI unit for recording; however the SH7780 has only 1 SSI
- * unit, and its pins are shared with the AC97 unit, among others.
- *
- * FEATURES:
- * The SSI features "compressed mode": in this mode it continuously
- * streams PCM data over the I2S lines and uses LRCK as a handshake
- * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
- * The number of bits sent over the wire in a frame can be adjusted
- * and can be independent from the actual sample bit depth. This is
- * useful to support TDM mode codecs like the AD1939 which have a
- * fixed TDM slot size, regardless of sample resolution.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define SSICR 0x00
-#define SSISR 0x04
-
-#define CR_DMAEN (1 << 28)
-#define CR_CHNL_SHIFT 22
-#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
-#define CR_DWL_SHIFT 19
-#define CR_DWL_MASK (7 << CR_DWL_SHIFT)
-#define CR_SWL_SHIFT 16
-#define CR_SWL_MASK (7 << CR_SWL_SHIFT)
-#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
-#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
-#define CR_SCKP (1 << 13) /* I2Sclock polarity */
-#define CR_SWSP (1 << 12) /* LRCK polarity */
-#define CR_SPDP (1 << 11)
-#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
-#define CR_PDTA (1 << 9) /* fifo data alignment */
-#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
-#define CR_BREN (1 << 7) /* clock gating in burst mode */
-#define CR_CKDIV_SHIFT 4
-#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
-#define CR_MUTE (1 << 3) /* SSI mute */
-#define CR_CPEN (1 << 2) /* compressed mode */
-#define CR_TRMD (1 << 1) /* transmit/receive select */
-#define CR_EN (1 << 0) /* enable SSI */
-
-#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
-
-struct ssi_priv {
- unsigned long mmio;
- unsigned long sysclk;
- int inuse;
-} ssi_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE680000,
- },
- {
- .mmio = 0xFE690000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE70000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-/*
- * track usage of the SSI; it is simplex-only so prevent attempts of
- * concurrent playback + capture. FIXME: any locking required?
- */
-static int ssi_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- if (ssi->inuse) {
- pr_debug("ssi: already in use!\n");
- return -EBUSY;
- } else
- ssi->inuse = 1;
- return 0;
-}
-
-static void ssi_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- ssi->inuse = 0;
-}
-
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- SSIREG(SSICR) |= CR_DMAEN | CR_EN;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
- unsigned int bits, channels, swl, recv, i;
-
- channels = params_channels(params);
- bits = params->msbits;
- recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
-
- pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
- pr_debug("bits: %u channels: %u\n", bits, channels);
-
- ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
- CR_SWL_MASK);
-
- /* direction (send/receive) */
- if (!recv)
- ssicr |= CR_TRMD; /* transmit */
-
- /* channels */
- if ((channels < 2) || (channels > 8) || (channels & 1)) {
- pr_debug("ssi: invalid number of channels\n");
- return -EINVAL;
- }
- ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
-
- /* DATA WORD LENGTH (DWL): databits in audio sample */
- i = 0;
- switch (bits) {
- case 32: ++i;
- case 24: ++i;
- case 22: ++i;
- case 20: ++i;
- case 18: ++i;
- case 16: ++i;
- ssicr |= i << CR_DWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid sample width\n");
- return -EINVAL;
- }
-
- /*
- * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
- * wires. This is usually bits_per_sample x channels/2; i.e. in
- * Stereo mode the SWL equals DWL. SWL can be bigger than the
- * product of (channels_per_slot x samplebits), e.g. for codecs
- * like the AD1939 which only accept 32bit wide TDM slots. For
- * "standard" I2S operation we set SWL = chans / 2 * DWL here.
- * Waiting for ASoC to get TDM support ;-)
- */
- if ((bits > 16) && (bits <= 24)) {
- bits = 24; /* these are padded by the SSI */
- /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
- }
- i = 0;
- swl = (bits * channels) / 2;
- switch (swl) {
- case 256: ++i;
- case 128: ++i;
- case 64: ++i;
- case 48: ++i;
- case 32: ++i;
- case 16: ++i;
- ssicr |= i << CR_SWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid system word length computed\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
-
- pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
- return 0;
-}
-
-static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
-
- ssi->sysclk = freq;
-
- return 0;
-}
-
-/*
- * This divider is used to generate the SSI_SCK (I2S bitclock) from the
- * clock at the HAC_BIT_CLK ("oversampling clock") pin.
- */
-static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr;
- int i;
-
- i = 0;
- ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
- switch (div) {
- case 16: ++i;
- case 8: ++i;
- case 4: ++i;
- case 2: ++i;
- SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
- case 1: break;
- default:
- pr_debug("ssi: invalid sck divider %d\n", div);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
-
- pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
-
- ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
- CR_SWS_MASTER | CR_SCK_MASTER);
-
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- ssicr |= CR_DEL | CR_PDTA;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ssicr |= CR_DEL;
- break;
- default:
- pr_debug("ssi: unsupported format\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
- case SND_SOC_DAIFMT_CONT:
- break;
- case SND_SOC_DAIFMT_GATED:
- ssicr |= CR_BREN;
- break;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- ssicr |= CR_SCKP; /* sample data at low clkedge */
- break;
- case SND_SOC_DAIFMT_NB_IF:
- ssicr |= CR_SCKP | CR_SWSP;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- ssicr |= CR_SWSP; /* word select starts low */
- break;
- default:
- pr_debug("ssi: invalid inversion\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
- case SND_SOC_DAIFMT_BC_FC:
- break;
- case SND_SOC_DAIFMT_BP_FC:
- ssicr |= CR_SCK_MASTER;
- break;
- case SND_SOC_DAIFMT_BC_FP:
- ssicr |= CR_SWS_MASTER;
- break;
- case SND_SOC_DAIFMT_BP_FP:
- ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
- break;
- default:
- pr_debug("ssi: invalid master/secondary configuration\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
- pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
-
- return 0;
-}
-
-/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
- * Master mode, so really this is board specific; the SSI can do any
- * rate with the right bitclk and divider settings.
- */
-#define SSI_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-/* the SSI can do 8-32 bit samples, with 8 possible channels */
-#define SSI_FMTS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
- SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
- SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
- SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
-
-static const struct snd_soc_dai_ops ssi_dai_ops = {
- .startup = ssi_startup,
- .shutdown = ssi_shutdown,
- .trigger = ssi_trigger,
- .hw_params = ssi_hw_params,
- .set_sysclk = ssi_set_sysclk,
- .set_clkdiv = ssi_set_clkdiv,
- .set_fmt = ssi_set_fmt,
-};
-
-static struct snd_soc_dai_driver sh4_ssi_dai[] = {
-{
- .name = "ssi-dai.0",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "ssi-dai.1",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_ssi_component = {
- .name = "sh4-ssi",
- .legacy_dai_naming = 1,
-};
-
-static int sh4_soc_dai_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
- sh4_ssi_dai,
- ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static struct platform_driver sh4_ssi_driver = {
- .driver = {
- .name = "sh4-ssi-dai",
- },
-
- .probe = sh4_soc_dai_probe,
-};
-
-module_platform_driver(sh4_ssi_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/soc/sh/Kconfig | 44 --
sound/soc/sh/Makefile | 16 -
sound/soc/sh/dma-sh7760.c | 334 ----------------
sound/soc/sh/fsi.c | 9 -
sound/soc/sh/hac.c | 345 ----------------
sound/soc/sh/migor.c | 205 ----------
sound/soc/sh/sh7760-ac97.c | 72 ----
sound/soc/sh/siu.h | 180 ---------
sound/soc/sh/siu_dai.c | 799 -------------------------------------
sound/soc/sh/siu_pcm.c | 553 -------------------------
sound/soc/sh/ssi.c | 403 -------------------
11 files changed, 2960 deletions(-)
delete mode 100644 sound/soc/sh/dma-sh7760.c
delete mode 100644 sound/soc/sh/hac.c
delete mode 100644 sound/soc/sh/migor.c
delete mode 100644 sound/soc/sh/sh7760-ac97.c
delete mode 100644 sound/soc/sh/siu.h
delete mode 100644 sound/soc/sh/siu_dai.c
delete mode 100644 sound/soc/sh/siu_pcm.c
delete mode 100644 sound/soc/sh/ssi.c
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 793a0326f32b46..4367927b81df20 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -2,25 +2,10 @@
menu "SoC Audio support for Renesas SoCs"
depends on ARCH_RENESAS || COMPILE_TEST
-config SND_SOC_PCM_SH7760
- tristate "SoC Audio support for Renesas SH7760"
- depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
- help
- Enable this option for SH7760 AC97/I2S audio support.
-
-
##
## Audio unit modules
##
-config SND_SOC_SH4_HAC
- tristate
- select AC97_BUS
- select SND_SOC_AC97_BUS
-
-config SND_SOC_SH4_SSI
- tristate
-
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
depends on COMMON_CLK
@@ -28,14 +13,6 @@ config SND_SOC_SH4_FSI
help
This option enables FSI sound support
-config SND_SOC_SH4_SIU
- tristate
- depends on ARCH_SHMOBILE && HAVE_CLK
- depends on DMADEVICES
- select DMA_ENGINE
- select SH_DMAE
- select FW_LOADER
-
config SND_SOC_RCAR
tristate "R-Car series SRU/SCU/SSIU/SSI support"
depends on COMMON_CLK
@@ -51,25 +28,4 @@ config SND_SOC_RZ
help
This option enables RZ/G2L SSIF-2 sound support.
-##
-## Boards
-##
-
-config SND_SH7760_AC97
- tristate "SH7760 AC97 sound support"
- depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760
- select SND_SOC_SH4_HAC
- select SND_SOC_AC97_CODEC
- help
- This option enables generic sound support for the first
- AC97 unit of the SH7760.
-
-config SND_SIU_MIGOR
- tristate "SIU sound support on Migo-R"
- depends on SH_MIGOR && I2C
- select SND_SOC_SH4_SIU
- select SND_SOC_WM8978
- help
- This option enables sound support for the SH7722 Migo-R board
-
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index f6fd79948f6ae9..c308dda887e633 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -1,28 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
-## DMA engines
-snd-soc-dma-sh7760-objs := dma-sh7760.o
-obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o
## audio units found on some SH-4
-snd-soc-hac-objs := hac.o
-snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
-snd-soc-siu-objs := siu_pcm.o siu_dai.o
-obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
-obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
-obj-$(CONFIG_SND_SOC_SH4_SIU) += snd-soc-siu.o
## audio units for R-Car
obj-$(CONFIG_SND_SOC_RCAR) += rcar/
-## boards
-snd-soc-sh7760-ac97-objs := sh7760-ac97.o
-snd-soc-migor-objs := migor.o
-
-obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
-obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
-
# RZ/G2L
snd-soc-rz-ssi-objs := rz-ssi.o
obj-$(CONFIG_SND_SOC_RZ) += snd-soc-rz-ssi.o
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
deleted file mode 100644
index 121e48f984c50c..00000000000000
--- a/sound/soc/sh/dma-sh7760.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// SH7760 ("camelot") DMABRG audio DMA unit support
-//
-// Copyright (C) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which
-// trigger an interrupt when one half of the programmed transfer size
-// has been xmitted.
-//
-// FIXME: little-endian only for now
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dmabrg.h>
-
-
-/* registers and bits */
-#define BRGATXSAR 0x00
-#define BRGARXDAR 0x04
-#define BRGATXTCR 0x08
-#define BRGARXTCR 0x0C
-#define BRGACR 0x10
-#define BRGATXTCNT 0x14
-#define BRGARXTCNT 0x18
-
-#define ACR_RAR (1 << 18)
-#define ACR_RDS (1 << 17)
-#define ACR_RDE (1 << 16)
-#define ACR_TAR (1 << 2)
-#define ACR_TDS (1 << 1)
-#define ACR_TDE (1 << 0)
-
-/* receiver/transmitter data alignment */
-#define ACR_RAM_NONE (0 << 24)
-#define ACR_RAM_4BYTE (1 << 24)
-#define ACR_RAM_2WORD (2 << 24)
-#define ACR_TAM_NONE (0 << 8)
-#define ACR_TAM_4BYTE (1 << 8)
-#define ACR_TAM_2WORD (2 << 8)
-
-
-struct camelot_pcm {
- unsigned long mmio; /* DMABRG audio channel control reg MMIO */
- unsigned int txid; /* ID of first DMABRG IRQ for this unit */
-
- struct snd_pcm_substream *tx_ss;
- unsigned long tx_period_size;
- unsigned int tx_period;
-
- struct snd_pcm_substream *rx_ss;
- unsigned long rx_period_size;
- unsigned int rx_period;
-
-} cam_pcm_data[2] = {
- {
- .mmio = 0xFE3C0040,
- .txid = DMABRGIRQ_A0TXF,
- },
- {
- .mmio = 0xFE3C0060,
- .txid = DMABRGIRQ_A1TXF,
- },
-};
-
-#define BRGREG(x) (*(unsigned long *)(cam->mmio + (x)))
-
-/*
- * set a minimum of 16kb per period, to avoid interrupt-"storm" and
- * resulting skipping. In general, the bigger the minimum size, the
- * better for overall system performance. (The SH7760 is a puny CPU
- * with a slow SDRAM interface and poor internal bus bandwidth,
- * *especially* when the LCDC is active). The minimum for the DMAC
- * is 8 bytes; 16kbytes are enough to get skip-free playback of a
- * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain
- * reasonable responsiveness in MPlayer.
- */
-#define DMABRG_PERIOD_MIN 16 * 1024
-#define DMABRG_PERIOD_MAX 0x03fffffc
-#define DMABRG_PREALLOC_BUFFER 32 * 1024
-#define DMABRG_PREALLOC_BUFFER_MAX 32 * 1024
-
-static const struct snd_pcm_hardware camelot_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_BATCH),
- .buffer_bytes_max = DMABRG_PERIOD_MAX,
- .period_bytes_min = DMABRG_PERIOD_MIN,
- .period_bytes_max = DMABRG_PERIOD_MAX / 2,
- .periods_min = 2,
- .periods_max = 2,
- .fifo_size = 128,
-};
-
-static void camelot_txdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->tx_period ^= 1;
- snd_pcm_period_elapsed(cam->tx_ss);
-}
-
-static void camelot_rxdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->rx_period ^= 1;
- snd_pcm_period_elapsed(cam->rx_ss);
-}
-
-static int camelot_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int ret, dmairq;
-
- snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware);
-
- /* DMABRG buffer half/full events */
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
- if (recv) {
- cam->rx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
- } else {
- cam->tx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
- }
- return 0;
-}
-
-static int camelot_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int dmairq;
-
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
-
- if (recv)
- cam->rx_ss = NULL;
- else
- cam->tx_ss = NULL;
-
- dmabrg_free_irq(dmairq + 1);
- dmabrg_free_irq(dmairq);
-
- return 0;
-}
-
-static int camelot_hw_params(struct snd_soc_component *component,
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- if (recv) {
- cam->rx_period_size = params_period_bytes(hw_params);
- cam->rx_period = 0;
- } else {
- cam->tx_period_size = params_period_bytes(hw_params);
- cam->tx_period = 0;
- }
- return 0;
-}
-
-static int camelot_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-
- pr_debug("PCM data: addr 0x%08lx len %d\n",
- (u32)runtime->dma_addr, runtime->dma_bytes);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGATXTCR) = runtime->dma_bytes;
- } else {
- BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGARXTCR) = runtime->dma_bytes;
- }
-
- return 0;
-}
-
-static inline void dmabrg_play_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: XFER start, auto-addr-reload */
- BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD;
-}
-
-static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data transmission */
- BRGREG(BRGACR) = acr | ACR_TDS;
-}
-
-static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: recv start, auto-reload */
- BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD;
-}
-
-static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data receiver */
- BRGREG(BRGACR) = acr | ACR_RDS;
-}
-
-static int camelot_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (recv)
- dmabrg_rec_dma_start(cam);
- else
- dmabrg_play_dma_start(cam);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (recv)
- dmabrg_rec_dma_stop(cam);
- else
- dmabrg_play_dma_stop(cam);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- unsigned long pos;
-
- /* cannot use the DMABRG pointer register: under load, by the
- * time ALSA comes around to read the register, it is already
- * far ahead (or worse, already done with the fragment) of the
- * position at the time the IRQ was triggered, which results in
- * fast-playback sound in my test application (ScummVM)
- */
- if (recv)
- pos = cam->rx_period ? cam->rx_period_size : 0;
- else
- pos = cam->tx_period ? cam->tx_period_size : 0;
-
- return bytes_to_frames(runtime, pos);
-}
-
-static int camelot_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_pcm *pcm = rtd->pcm;
-
- /* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
- * in MMAP mode (i.e. aplay -M)
- */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- DMABRG_PREALLOC_BUFFER, DMABRG_PREALLOC_BUFFER_MAX);
-
- return 0;
-}
-
-static const struct snd_soc_component_driver sh7760_soc_component = {
- .open = camelot_pcm_open,
- .close = camelot_pcm_close,
- .hw_params = camelot_hw_params,
- .prepare = camelot_prepare,
- .trigger = camelot_trigger,
- .pointer = camelot_pos,
- .pcm_construct = camelot_pcm_new,
-};
-
-static int sh7760_soc_platform_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh7760_soc_component,
- NULL, 0);
-}
-
-static struct platform_driver sh7760_pcm_driver = {
- .driver = {
- .name = "sh7760-pcm-audio",
- },
-
- .probe = sh7760_soc_platform_probe,
-};
-
-module_platform_driver(sh7760_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index f3edc2e3d9d7c4..c599070f2210f4 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1372,16 +1372,7 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
{
int is_play = fsi_stream_is_play(fsi, io);
-#ifdef CONFIG_SUPERH
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- io->chan = dma_request_channel(mask, shdma_chan_filter,
- (void *)io->dma_id);
-#else
io->chan = dma_request_slave_channel(dev, is_play ? "tx" : "rx");
-#endif
if (io->chan) {
struct dma_slave_config cfg = {};
int ret;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
deleted file mode 100644
index 46d145cbaf2970..00000000000000
--- a/sound/soc/sh/hac.c
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Hitachi Audio Controller (AC97) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable HAC output pins!
-
-/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use. You'll have
- * to edit the code a bit to use the other AC97 unit. --mlau
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-/* regs and bits */
-#define HACCR 0x08
-#define HACCSAR 0x20
-#define HACCSDR 0x24
-#define HACPCML 0x28
-#define HACPCMR 0x2C
-#define HACTIER 0x50
-#define HACTSR 0x54
-#define HACRIER 0x58
-#define HACRSR 0x5C
-#define HACACR 0x60
-
-#define CR_CR (1 << 15) /* "codec-ready" indicator */
-#define CR_CDRT (1 << 11) /* cold reset */
-#define CR_WMRT (1 << 10) /* warm reset */
-#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
-#define CR_ST (1 << 5) /* AC97 link start bit */
-
-#define CSAR_RD (1 << 19) /* AC97 data read bit */
-#define CSAR_WR (0)
-
-#define TSR_CMDAMT (1 << 31)
-#define TSR_CMDDMT (1 << 30)
-
-#define RSR_STARY (1 << 22)
-#define RSR_STDRY (1 << 21)
-
-#define ACR_DMARX16 (1 << 30)
-#define ACR_DMATX16 (1 << 29)
-#define ACR_TX12ATOM (1 << 26)
-#define ACR_DMARX20 ((1 << 24) | (1 << 22))
-#define ACR_DMATX20 ((1 << 23) | (1 << 21))
-
-#define CSDR_SHIFT 4
-#define CSDR_MASK (0xffff << CSDR_SHIFT)
-#define CSAR_SHIFT 12
-#define CSAR_MASK (0x7f << CSAR_SHIFT)
-
-#define AC97_WRITE_RETRY 1
-#define AC97_READ_RETRY 5
-
-/* manual-suggested AC97 codec access timeouts (us) */
-#define TMO_E1 500 /* 21 < E1 < 1000 */
-#define TMO_E2 13 /* 13 < E2 */
-#define TMO_E3 21 /* 21 < E3 */
-#define TMO_E4 500 /* 21 < E4 < 1000 */
-
-struct hac_priv {
- unsigned long mmio; /* HAC base address */
-} hac_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE240000,
- },
- {
- .mmio = 0xFE250000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE40000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
-
-/*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
-static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
- unsigned short *v)
-{
- unsigned int to1, to2, i;
- unsigned short adr;
-
- for (i = AC97_READ_RETRY; i; i--) {
- *v = 0;
- /* wait for HAC to receive something from the codec */
- for (to1 = TMO_E4;
- to1 && !(HACREG(HACRSR) & RSR_STARY);
- --to1)
- udelay(1);
- for (to2 = TMO_E4;
- to2 && !(HACREG(HACRSR) & RSR_STDRY);
- --to2)
- udelay(1);
-
- if (!to1 && !to2)
- return 0; /* codec comm is down */
-
- adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
- *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
-
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-
- if (r == adr)
- break;
-
- /* manual says: wait at least 21 usec before retrying */
- udelay(21);
- }
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- return i;
-}
-
-static unsigned short hac_read_codec_aux(struct hac_priv *hac,
- unsigned short reg)
-{
- unsigned short val;
- unsigned int i, to;
-
- for (i = AC97_READ_RETRY; i; i--) {
- /* send_read_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDAMT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
- local_irq_enable();
-
- for (to = TMO_E3;
- to && !(HACREG(HACTSR) & TSR_CMDAMT);
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~TSR_CMDAMT;
- val = 0;
- if (hac_get_codec_data(hac, reg, &val) != 0)
- break;
- }
-
- return i ? val : ~0;
-}
-
-static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int i, to;
- /* write_codec_aux */
- for (i = AC97_WRITE_RETRY; i; i--) {
- /* send_write_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
- HACREG(HACCSDR) = (val << CSDR_SHIFT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
- local_irq_enable();
-
- /* poll-wait for CMDAMT and CMDDMT */
- for (to = TMO_E1;
- to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
- if (to)
- break;
- /* timeout, try again */
- }
-}
-
-static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- return hac_read_codec_aux(hac, reg);
-}
-
-static void hac_ac97_warmrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int tmo;
-
- HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
- msleep(10);
- HACREG(HACCR) = CR_ST | CR_B9;
- for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
- udelay(1);
-
- if (!tmo)
- printk(KERN_INFO "hac: reset: AC97 link down!\n");
- /* settings this bit lets us have a conversation with codec */
- HACREG(HACACR) |= ACR_TX12ATOM;
-}
-
-static void hac_ac97_coldrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac;
- hac = &hac_cpu_data[unit_id];
-
- HACREG(HACCR) = 0;
- HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
- msleep(10);
- hac_ac97_warmrst(ac97);
-}
-
-static struct snd_ac97_bus_ops hac_ac97_ops = {
- .read = hac_ac97_read,
- .write = hac_ac97_write,
- .reset = hac_ac97_coldrst,
- .warm_reset = hac_ac97_warmrst,
-};
-
-static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct hac_priv *hac = &hac_cpu_data[dai->id];
- int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- switch (params->msbits) {
- case 16:
- HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
- HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
- break;
- case 20:
- HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
- HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
- break;
- default:
- pr_debug("hac: invalid depth %d bit\n", params->msbits);
- return -EINVAL;
- break;
- }
-
- return 0;
-}
-
-#define AC97_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-#define AC97_FMTS \
- SNDRV_PCM_FMTBIT_S16_LE
-
-static const struct snd_soc_dai_ops hac_dai_ops = {
- .hw_params = hac_hw_params,
-};
-
-static struct snd_soc_dai_driver sh4_hac_dai[] = {
-{
- .name = "hac-dai.0",
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "hac-dai.1",
- .id = 1,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_hac_component = {
- .name = "sh4-hac",
- .legacy_dai_naming = 1,
-};
-
-static int hac_soc_platform_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
- if (ret != 0)
- return ret;
-
- return devm_snd_soc_register_component(&pdev->dev, &sh4_hac_component,
- sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
-}
-
-static int hac_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_set_ac97_ops(NULL);
- return 0;
-}
-
-static struct platform_driver hac_pcm_driver = {
- .driver = {
- .name = "hac-pcm-audio",
- },
-
- .probe = hac_soc_platform_probe,
- .remove = hac_soc_platform_remove,
-};
-
-module_platform_driver(hac_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
deleted file mode 100644
index 7082c12d3bf238..00000000000000
--- a/sound/soc/sh/migor.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// ALSA SoC driver for Migo-R
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-#include <linux/clkdev.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-
-#include <cpu/sh7722.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "../codecs/wm8978.h"
-#include "siu.h"
-
-/* Default 8000Hz sampling frequency */
-static unsigned long codec_freq = 8000 * 512;
-
-static unsigned int use_count;
-
-/* External clock, sourced from the codec at the SIUMCKB pin */
-static unsigned long siumckb_recalc(struct clk *clk)
-{
- return codec_freq;
-}
-
-static struct sh_clk_ops siumckb_clk_ops = {
- .recalc = siumckb_recalc,
-};
-
-static struct clk siumckb_clk = {
- .ops = &siumckb_clk_ops,
- .rate = 0, /* initialised at run-time */
-};
-
-static struct clk_lookup *siumckb_lookup;
-
-static int migor_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- int ret;
- unsigned int rate = params_rate(params);
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
- if (ret < 0)
- return ret;
-
- codec_freq = rate * 512;
- /*
- * This propagates the parent frequency change to children and
- * recalculates the frequency table
- */
- clk_set_rate(&siumckb_clk, codec_freq);
- dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
-
- ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
- codec_freq / 2, SND_SOC_CLOCK_IN);
-
- if (!ret)
- use_count++;
-
- return ret;
-}
-
-static int migor_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-
- if (use_count) {
- use_count--;
-
- if (!use_count)
- snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
- SND_SOC_CLOCK_IN);
- } else {
- dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
- }
-
- return 0;
-}
-
-static const struct snd_soc_ops migor_dai_ops = {
- .hw_params = migor_hw_params,
- .hw_free = migor_hw_free,
-};
-
-static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
- SND_SOC_DAPM_HP("Headphone", NULL),
- SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
- SND_SOC_DAPM_MIC("External Microphone", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
- { "Headphone", NULL, "OUT4 VMID" },
- { "OUT4 VMID", NULL, "LHP" },
- { "OUT4 VMID", NULL, "RHP" },
-
- /* On-board microphone */
- { "RMICN", NULL, "Mic Bias" },
- { "RMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "Onboard Microphone" },
-
- /* External microphone */
- { "LMICN", NULL, "Mic Bias" },
- { "LMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "External Microphone" },
-};
-
-/* migor digital audio interface glue - connects codec <--> CPU */
-SND_SOC_DAILINK_DEFS(wm8978,
- DAILINK_COMP_ARRAY(COMP_CPU("siu-pcm-audio")),
- DAILINK_COMP_ARRAY(COMP_CODEC("wm8978.0-001a", "wm8978-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("siu-pcm-audio")));
-
-static struct snd_soc_dai_link migor_dai = {
- .name = "wm8978",
- .stream_name = "WM8978",
- .dai_fmt = SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBS_CFS,
- .ops = &migor_dai_ops,
- SND_SOC_DAILINK_REG(wm8978),
-};
-
-/* migor audio machine driver */
-static struct snd_soc_card snd_soc_migor = {
- .name = "Migo-R",
- .owner = THIS_MODULE,
- .dai_link = &migor_dai,
- .num_links = 1,
-
- .dapm_widgets = migor_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(migor_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
-static struct platform_device *migor_snd_device;
-
-static int __init migor_init(void)
-{
- int ret;
-
- ret = clk_register(&siumckb_clk);
- if (ret < 0)
- return ret;
-
- siumckb_lookup = clkdev_create(&siumckb_clk, "siumckb_clk", NULL);
- if (!siumckb_lookup) {
- ret = -ENOMEM;
- goto eclkdevalloc;
- }
-
- /* Port number used on this machine: port B */
- migor_snd_device = platform_device_alloc("soc-audio", 1);
- if (!migor_snd_device) {
- ret = -ENOMEM;
- goto epdevalloc;
- }
-
- platform_set_drvdata(migor_snd_device, &snd_soc_migor);
-
- ret = platform_device_add(migor_snd_device);
- if (ret)
- goto epdevadd;
-
- return 0;
-
-epdevadd:
- platform_device_put(migor_snd_device);
-epdevalloc:
- clkdev_drop(siumckb_lookup);
-eclkdevalloc:
- clk_unregister(&siumckb_clk);
- return ret;
-}
-
-static void __exit migor_exit(void)
-{
- clkdev_drop(siumckb_lookup);
- clk_unregister(&siumckb_clk);
- platform_device_unregister(migor_snd_device);
-}
-
-module_init(migor_init);
-module_exit(migor_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("ALSA SoC Migor");
-MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
deleted file mode 100644
index d267243a159ba6..00000000000000
--- a/sound/soc/sh/sh7760-ac97.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Generic AC97 sound support for SH7760
-//
-// (c) 2007 Manuel Lauss
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define IPSEL 0xFE400034
-
-SND_SOC_DAILINK_DEFS(ac97,
- DAILINK_COMP_ARRAY(COMP_CPU("hac-dai.0")), /* HAC0 */
- DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("sh7760-pcm-audio")));
-
-static struct snd_soc_dai_link sh7760_ac97_dai = {
- .name = "AC97",
- .stream_name = "AC97 HiFi",
- SND_SOC_DAILINK_REG(ac97),
-};
-
-static struct snd_soc_card sh7760_ac97_soc_machine = {
- .name = "SH7760 AC97",
- .owner = THIS_MODULE,
- .dai_link = &sh7760_ac97_dai,
- .num_links = 1,
-};
-
-static struct platform_device *sh7760_ac97_snd_device;
-
-static int __init sh7760_ac97_init(void)
-{
- int ret;
- unsigned short ipsel;
-
- /* enable both AC97 controllers in pinmux reg */
- ipsel = __raw_readw(IPSEL);
- __raw_writew(ipsel | (3 << 10), IPSEL);
-
- ret = -ENOMEM;
- sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1);
- if (!sh7760_ac97_snd_device)
- goto out;
-
- platform_set_drvdata(sh7760_ac97_snd_device,
- &sh7760_ac97_soc_machine);
- ret = platform_device_add(sh7760_ac97_snd_device);
-
- if (ret)
- platform_device_put(sh7760_ac97_snd_device);
-
-out:
- return ret;
-}
-
-static void __exit sh7760_ac97_exit(void)
-{
- platform_device_unregister(sh7760_ac97_snd_device);
-}
-
-module_init(sh7760_ac97_init);
-module_exit(sh7760_ac97_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
deleted file mode 100644
index a675c36fc9d956..00000000000000
--- a/sound/soc/sh/siu.h
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#ifndef SIU_H
-#define SIU_H
-
-/* Common kernel and user-space firmware-building defines and types */
-
-#define YRAM0_SIZE (0x0040 / 4) /* 16 */
-#define YRAM1_SIZE (0x0080 / 4) /* 32 */
-#define YRAM2_SIZE (0x0040 / 4) /* 16 */
-#define YRAM3_SIZE (0x0080 / 4) /* 32 */
-#define YRAM4_SIZE (0x0080 / 4) /* 32 */
-#define YRAM_DEF_SIZE (YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
- YRAM3_SIZE + YRAM4_SIZE)
-#define YRAM_FIR_SIZE (0x0400 / 4) /* 256 */
-#define YRAM_IIR_SIZE (0x0200 / 4) /* 128 */
-
-#define XRAM0_SIZE (0x0400 / 4) /* 256 */
-#define XRAM1_SIZE (0x0200 / 4) /* 128 */
-#define XRAM2_SIZE (0x0200 / 4) /* 128 */
-
-/* PRAM program array size */
-#define PRAM0_SIZE (0x0100 / 4) /* 64 */
-#define PRAM1_SIZE ((0x2000 - 0x0100) / 4) /* 1984 */
-
-#include <linux/types.h>
-
-struct siu_spb_param {
- __u32 ab1a; /* input FIFO address */
- __u32 ab0a; /* output FIFO address */
- __u32 dir; /* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
- __u32 event; /* SPB program starting conditions */
- __u32 stfifo; /* STFIFO register setting value */
- __u32 trdat; /* TRDAT register setting value */
-};
-
-struct siu_firmware {
- __u32 yram_fir_coeff[YRAM_FIR_SIZE];
- __u32 pram0[PRAM0_SIZE];
- __u32 pram1[PRAM1_SIZE];
- __u32 yram0[YRAM0_SIZE];
- __u32 yram1[YRAM1_SIZE];
- __u32 yram2[YRAM2_SIZE];
- __u32 yram3[YRAM3_SIZE];
- __u32 yram4[YRAM4_SIZE];
- __u32 spbpar_num;
- struct siu_spb_param spbpar[32];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sh_dma.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#define SIU_PERIOD_BYTES_MAX 8192 /* DMA transfer/period size */
-#define SIU_PERIOD_BYTES_MIN 256 /* DMA transfer/period size */
-#define SIU_PERIODS_MAX 64 /* Max periods in buffer */
-#define SIU_PERIODS_MIN 4 /* Min periods in buffer */
-#define SIU_BUFFER_BYTES_MAX (SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
-
-/* SIU ports: only one can be used at a time */
-enum {
- SIU_PORT_A,
- SIU_PORT_B,
- SIU_PORT_NUM,
-};
-
-/* SIU clock configuration */
-enum {
- SIU_CLKA_PLL,
- SIU_CLKA_EXT,
- SIU_CLKB_PLL,
- SIU_CLKB_EXT
-};
-
-struct device;
-struct siu_info {
- struct device *dev;
- int port_id;
- u32 __iomem *pram;
- u32 __iomem *xram;
- u32 __iomem *yram;
- u32 __iomem *reg;
- struct siu_firmware fw;
-};
-
-struct siu_stream {
- struct work_struct work;
- struct snd_pcm_substream *substream;
- snd_pcm_format_t format;
- size_t buf_bytes;
- size_t period_bytes;
- int cur_period; /* Period currently in dma */
- u32 volume;
- snd_pcm_sframes_t xfer_cnt; /* Number of frames */
- u8 rw_flg; /* transfer status */
- /* DMA status */
- struct dma_chan *chan; /* DMA channel */
- struct dma_async_tx_descriptor *tx_desc;
- dma_cookie_t cookie;
- struct sh_dmae_slave param;
-};
-
-struct siu_port {
- unsigned long play_cap; /* Used to track full duplex */
- struct snd_pcm *pcm;
- struct siu_stream playback;
- struct siu_stream capture;
- u32 stfifo; /* STFIFO value from firmware */
- u32 trdat; /* TRDAT value from firmware */
-};
-
-extern struct siu_port *siu_ports[SIU_PORT_NUM];
-
-static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
-{
- struct platform_device *pdev =
- to_platform_device(substream->pcm->card->dev);
- return siu_ports[pdev->id];
-}
-
-/* Register access */
-static inline void siu_write32(u32 __iomem *addr, u32 val)
-{
- __raw_writel(val, addr);
-}
-
-static inline u32 siu_read32(u32 __iomem *addr)
-{
- return __raw_readl(addr);
-}
-
-/* SIU registers */
-#define SIU_IFCTL (0x000 / sizeof(u32))
-#define SIU_SRCTL (0x004 / sizeof(u32))
-#define SIU_SFORM (0x008 / sizeof(u32))
-#define SIU_CKCTL (0x00c / sizeof(u32))
-#define SIU_TRDAT (0x010 / sizeof(u32))
-#define SIU_STFIFO (0x014 / sizeof(u32))
-#define SIU_DPAK (0x01c / sizeof(u32))
-#define SIU_CKREV (0x020 / sizeof(u32))
-#define SIU_EVNTC (0x028 / sizeof(u32))
-#define SIU_SBCTL (0x040 / sizeof(u32))
-#define SIU_SBPSET (0x044 / sizeof(u32))
-#define SIU_SBFSTS (0x068 / sizeof(u32))
-#define SIU_SBDVCA (0x06c / sizeof(u32))
-#define SIU_SBDVCB (0x070 / sizeof(u32))
-#define SIU_SBACTIV (0x074 / sizeof(u32))
-#define SIU_DMAIA (0x090 / sizeof(u32))
-#define SIU_DMAIB (0x094 / sizeof(u32))
-#define SIU_DMAOA (0x098 / sizeof(u32))
-#define SIU_DMAOB (0x09c / sizeof(u32))
-#define SIU_DMAML (0x0a0 / sizeof(u32))
-#define SIU_SPSTS (0x0cc / sizeof(u32))
-#define SIU_SPCTL (0x0d0 / sizeof(u32))
-#define SIU_BRGASEL (0x100 / sizeof(u32))
-#define SIU_BRRA (0x104 / sizeof(u32))
-#define SIU_BRGBSEL (0x108 / sizeof(u32))
-#define SIU_BRRB (0x10c / sizeof(u32))
-
-extern const struct snd_soc_component_driver siu_component;
-extern struct siu_info *siu_i2s_data;
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
-void siu_free_port(struct siu_port *port_info);
-
-#endif
-
-#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
deleted file mode 100644
index f2a386fcd92e4d..00000000000000
--- a/sound/soc/sh/siu_dai.c
+++ /dev/null
@@ -1,799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/siu.h>
-
-#include <sound/control.h>
-#include <sound/soc.h>
-
-#include "siu.h"
-
-/* Board specifics */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SIU_MAX_VOLUME 0x1000
-#else
-# define SIU_MAX_VOLUME 0x7fff
-#endif
-
-#define PRAM_SIZE 0x2000
-#define XRAM_SIZE 0x800
-#define YRAM_SIZE 0x800
-
-#define XRAM_OFFSET 0x4000
-#define YRAM_OFFSET 0x6000
-#define REG_OFFSET 0xc000
-
-#define PLAYBACK_ENABLED 1
-#define CAPTURE_ENABLED 2
-
-#define VOLUME_CAPTURE 0
-#define VOLUME_PLAYBACK 1
-#define DFLT_VOLUME_LEVEL 0x08000800
-
-/*
- * SPDIF is only available on port A and on some SIU implementations it is only
- * available for input. Due to the lack of hardware to test it, SPDIF is left
- * disabled in this driver version
- */
-struct format_flag {
- u32 i2s;
- u32 pcm;
- u32 spdif;
- u32 mask;
-};
-
-struct port_flag {
- struct format_flag playback;
- struct format_flag capture;
-};
-
-struct siu_info *siu_i2s_data;
-
-static struct port_flag siu_flags[SIU_PORT_NUM] = {
- [SIU_PORT_A] = {
- .playback = {
- .i2s = 0x50000000,
- .pcm = 0x40000000,
- .spdif = 0x80000000, /* not on all SIU versions */
- .mask = 0xd0000000,
- },
- .capture = {
- .i2s = 0x05000000,
- .pcm = 0x04000000,
- .spdif = 0x08000000,
- .mask = 0x0d000000,
- },
- },
- [SIU_PORT_B] = {
- .playback = {
- .i2s = 0x00500000,
- .pcm = 0x00400000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00500000,
- },
- .capture = {
- .i2s = 0x00050000,
- .pcm = 0x00040000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00050000,
- },
- },
-};
-
-static void siu_dai_start(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- /* Issue software reset to siu */
- siu_write32(base + SIU_SRCTL, 0);
-
- /* Wait for the reset to take effect */
- udelay(1);
-
- port_info->stfifo = 0;
- port_info->trdat = 0;
-
- /* portA, portB, SIU operate */
- siu_write32(base + SIU_SRCTL, 0x301);
-
- /* portA=256fs, portB=256fs */
- siu_write32(base + SIU_CKCTL, 0x40400000);
-
- /* portA's BRG does not divide SIUCKA */
- siu_write32(base + SIU_BRGASEL, 0);
- siu_write32(base + SIU_BRRA, 0);
-
- /* portB's BRG divides SIUCKB by half */
- siu_write32(base + SIU_BRGBSEL, 1);
- siu_write32(base + SIU_BRRB, 0);
-
- siu_write32(base + SIU_IFCTL, 0x44440000);
-
- /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
- siu_write32(base + SIU_SFORM, 0x0c0c0000);
-
- /*
- * Volume levels: looks like the DSP firmware implements volume controls
- * differently from what's described in the datasheet
- */
- siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
- siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
-}
-
-static void siu_dai_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- /* SIU software reset */
- siu_write32(base + SIU_SRCTL, 0);
-}
-
-static void siu_dai_spbAselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path A use */
- if (!info->port_id)
- idx = 1; /* portA */
- else
- idx = 2; /* portB */
-
- ydef[0] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) |
- (fw->spbpar[idx].dir << 7) | 3;
- ydef[1] = fw->yram0[1]; /* 0x03000300 */
- ydef[2] = (16 / 2) << 24;
- ydef[3] = fw->yram0[3]; /* 0 */
- ydef[4] = fw->yram0[4]; /* 0 */
- ydef[7] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_spbBselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path B use */
- if (!info->port_id)
- idx = 7; /* portA */
- else
- idx = 8; /* portB */
-
- ydef[5] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) | 1;
- ydef[6] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_open(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 srctl, ifctl;
-
- srctl = siu_read32(base + SIU_SRCTL);
- ifctl = siu_read32(base + SIU_IFCTL);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- /* portA operates */
- srctl |= 0x200;
- ifctl &= ~0xc2;
- break;
- case SIU_PORT_B:
- /* portB operates */
- srctl |= 0x100;
- ifctl &= ~0x31;
- break;
- }
-
- siu_write32(base + SIU_SRCTL, srctl);
- /* Unmute and configure portA */
- siu_write32(base + SIU_IFCTL, ifctl);
-}
-
-/*
- * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
- * packing is supported
- */
-static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 dpak;
-
- dpak = siu_read32(base + SIU_DPAK);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- dpak &= ~0xc0000000;
- break;
- case SIU_PORT_B:
- dpak &= ~0x00c00000;
- break;
- }
-
- siu_write32(base + SIU_DPAK, dpak);
-}
-
-static int siu_dai_spbstart(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- int cnt;
- u32 __iomem *add;
- u32 *ptr;
-
- /* Load SPB Program in PRAM */
- ptr = fw->pram0;
- add = info->pram;
- for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- ptr = fw->pram1;
- add = info->pram + (0x0100 / sizeof(u32));
- for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- /* XRAM initialization */
- add = info->xram;
- for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- /* YRAM variable area initialization */
- add = info->yram;
- for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
- siu_write32(add, ydef[cnt]);
-
- /* YRAM FIR coefficient area initialization */
- add = info->yram + (0x0200 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
- siu_write32(add, fw->yram_fir_coeff[cnt]);
-
- /* YRAM IIR coefficient area initialization */
- add = info->yram + (0x0600 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- siu_write32(base + SIU_TRDAT, port_info->trdat);
- port_info->trdat = 0x0;
-
-
- /* SPB start condition: software */
- siu_write32(base + SIU_SBACTIV, 0);
- /* Start SPB */
- siu_write32(base + SIU_SBCTL, 0xc0000000);
- /* Wait for program to halt */
- cnt = 0x10000;
- while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
- cpu_relax();
-
- if (!cnt)
- return -EBUSY;
-
- /* SPB program start address setting */
- siu_write32(base + SIU_SBPSET, 0x00400000);
- /* SPB hardware start(FIFOCTL source) */
- siu_write32(base + SIU_SBACTIV, 0xc0000000);
-
- return 0;
-}
-
-static void siu_dai_spbstop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- siu_write32(base + SIU_SBACTIV, 0);
- /* SPB stop */
- siu_write32(base + SIU_SBCTL, 0);
-
- port_info->stfifo = 0;
-}
-
-/* API functions */
-
-/* Playback and capture hardware properties are identical */
-static const struct snd_pcm_hardware siu_dai_pcm_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
- .period_bytes_min = SIU_PERIOD_BYTES_MIN,
- .period_bytes_max = SIU_PERIOD_BYTES_MAX,
- .periods_min = SIU_PERIODS_MIN,
- .periods_max = SIU_PERIODS_MAX,
-};
-
-static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_info *uinfo)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = SIU_MAX_VOLUME;
-
- return 0;
-}
-
-static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- u32 vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- vol = port_info->playback.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- vol = port_info->capture.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 new_vol;
- u32 cur_vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
- ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
- return -EINVAL;
-
- new_vol = ucontrol->value.integer.value[0] |
- ucontrol->value.integer.value[1] << 16;
-
- /* See comment above - DSP firmware implementation */
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- cur_vol = port_info->playback.volume;
- siu_write32(base + SIU_SBDVCA, new_vol);
- port_info->playback.volume = new_vol;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- cur_vol = port_info->capture.volume;
- siu_write32(base + SIU_SBDVCB, new_vol);
- port_info->capture.volume = new_vol;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- if (cur_vol != new_vol)
- return 1;
-
- return 0;
-}
-
-static const struct snd_kcontrol_new playback_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_PLAYBACK,
-};
-
-static const struct snd_kcontrol_new capture_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Capture Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_CAPTURE,
-};
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
-{
- struct device *dev = card->dev;
- struct snd_kcontrol *kctrl;
- int ret;
-
- *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
- if (!*port_info)
- return -ENOMEM;
-
- dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
-
- (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
- (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
-
- /*
- * Add mixer support. The SPB is used to change the volume. Both
- * ports use the same SPB. Therefore, we only register one
- * control instance since it will be used by both channels.
- * In error case we continue without controls.
- */
- kctrl = snd_ctl_new1(&playback_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add playback controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- kctrl = snd_ctl_new1(&capture_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add capture controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- return 0;
-}
-
-void siu_free_port(struct siu_port *port_info)
-{
- kfree(port_info);
-}
-
-static int siu_dai_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- int ret;
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
-
- ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
- if (unlikely(ret < 0))
- return ret;
-
- siu_dai_start(port_info);
-
- return 0;
-}
-
-static void siu_dai_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- port_info->play_cap &= ~PLAYBACK_ENABLED;
- else
- port_info->play_cap &= ~CAPTURE_ENABLED;
-
- /* Stop the siu if the other stream is not using it */
- if (!port_info->play_cap) {
- /* during stmread or stmwrite ? */
- if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
- return;
- siu_dai_spbstop(port_info);
- siu_dai_stop(port_info);
- }
-}
-
-/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
-static int siu_dai_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- struct siu_stream *siu_stream;
- int self, ret;
-
- dev_dbg(substream->pcm->card->dev,
- "%s: port %d, active streams %lx, %d channels\n",
- __func__, info->port_id, port_info->play_cap, rt->channels);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- self = PLAYBACK_ENABLED;
- siu_stream = &port_info->playback;
- } else {
- self = CAPTURE_ENABLED;
- siu_stream = &port_info->capture;
- }
-
- /* Set up the siu if not already done */
- if (!port_info->play_cap) {
- siu_stream->rw_flg = 0; /* stream-data transfer flag */
-
- siu_dai_spbAselect(port_info);
- siu_dai_spbBselect(port_info);
-
- siu_dai_open(siu_stream);
-
- siu_dai_pcmdatapack(siu_stream);
-
- ret = siu_dai_spbstart(port_info);
- if (ret < 0)
- goto fail;
- } else {
- ret = 0;
- }
-
- port_info->play_cap |= self;
-
-fail:
- return ret;
-}
-
-/*
- * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
- * capture, however, the current API sets the bus format globally for a DAI.
- */
-static int siu_dai_set_fmt(struct snd_soc_dai *dai,
- unsigned int fmt)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- u32 __iomem *base = info->reg;
- u32 ifctl;
-
- dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
- __func__, fmt, info->port_id);
-
- if (info->port_id < 0)
- return -ENODEV;
-
- /* Here select between I2S / PCM / SPDIF */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- ifctl = siu_flags[info->port_id].playback.i2s |
- siu_flags[info->port_id].capture.i2s;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ifctl = siu_flags[info->port_id].playback.pcm |
- siu_flags[info->port_id].capture.pcm;
- break;
- /* SPDIF disabled - see comment at the top */
- default:
- return -EINVAL;
- }
-
- ifctl |= ~(siu_flags[info->port_id].playback.mask |
- siu_flags[info->port_id].capture.mask) &
- siu_read32(base + SIU_IFCTL);
- siu_write32(base + SIU_IFCTL, ifctl);
-
- return 0;
-}
-
-static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct clk *siu_clk, *parent_clk;
- char *siu_name, *parent_name;
- int ret;
-
- if (dir != SND_SOC_CLOCK_IN)
- return -EINVAL;
-
- dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
-
- switch (clk_id) {
- case SIU_CLKA_PLL:
- siu_name = "siua_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKA_EXT:
- siu_name = "siua_clk";
- parent_name = "siumcka_clk";
- break;
- case SIU_CLKB_PLL:
- siu_name = "siub_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKB_EXT:
- siu_name = "siub_clk";
- parent_name = "siumckb_clk";
- break;
- default:
- return -EINVAL;
- }
-
- siu_clk = clk_get(dai->dev, siu_name);
- if (IS_ERR(siu_clk)) {
- dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
- PTR_ERR(siu_clk));
- return PTR_ERR(siu_clk);
- }
-
- parent_clk = clk_get(dai->dev, parent_name);
- if (IS_ERR(parent_clk)) {
- ret = PTR_ERR(parent_clk);
- dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
- goto epclkget;
- }
-
- ret = clk_set_parent(siu_clk, parent_clk);
- if (ret < 0) {
- dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
- goto eclksetp;
- }
-
- ret = clk_set_rate(siu_clk, freq);
- if (ret < 0)
- dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
-
- /* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
-eclksetp:
- clk_put(parent_clk);
-epclkget:
- clk_put(siu_clk);
-
- return ret;
-}
-
-static const struct snd_soc_dai_ops siu_dai_ops = {
- .startup = siu_dai_startup,
- .shutdown = siu_dai_shutdown,
- .prepare = siu_dai_prepare,
- .set_sysclk = siu_dai_set_sysclk,
- .set_fmt = siu_dai_set_fmt,
-};
-
-static struct snd_soc_dai_driver siu_i2s_dai = {
- .name = "siu-i2s-dai",
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .ops = &siu_dai_ops,
-};
-
-static int siu_probe(struct platform_device *pdev)
-{
- const struct firmware *fw_entry;
- struct resource *res, *region;
- struct siu_info *info;
- int ret;
-
- info = devm_kmalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- siu_i2s_data = info;
- info->dev = &pdev->dev;
-
- ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
- if (ret)
- return ret;
-
- /*
- * Loaded firmware is "const" - read only, but we have to modify it in
- * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
- */
- memcpy(&info->fw, fw_entry->data, fw_entry->size);
-
- release_firmware(fw_entry);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- region = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "SIU region already claimed\n");
- return -EBUSY;
- }
-
- info->pram = devm_ioremap(&pdev->dev, res->start, PRAM_SIZE);
- if (!info->pram)
- return -ENOMEM;
- info->xram = devm_ioremap(&pdev->dev, res->start + XRAM_OFFSET,
- XRAM_SIZE);
- if (!info->xram)
- return -ENOMEM;
- info->yram = devm_ioremap(&pdev->dev, res->start + YRAM_OFFSET,
- YRAM_SIZE);
- if (!info->yram)
- return -ENOMEM;
- info->reg = devm_ioremap(&pdev->dev, res->start + REG_OFFSET,
- resource_size(res) - REG_OFFSET);
- if (!info->reg)
- return -ENOMEM;
-
- dev_set_drvdata(&pdev->dev, info);
-
- /* register using ARRAY version so we can keep dai name */
- ret = devm_snd_soc_register_component(&pdev->dev, &siu_component,
- &siu_i2s_dai, 1);
- if (ret < 0)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int siu_remove(struct platform_device *pdev)
-{
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver siu_driver = {
- .driver = {
- .name = "siu-pcm-audio",
- },
- .probe = siu_probe,
- .remove = siu_remove,
-};
-
-module_platform_driver(siu_driver);
-
-MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
-MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
deleted file mode 100644
index f15ff36e793455..00000000000000
--- a/sound/soc/sh/siu_pcm.c
+++ /dev/null
@@ -1,553 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <sound/control.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/siu.h>
-
-#include "siu.h"
-
-#define DRV_NAME "siu-i2s"
-#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
- ((buf_bytes) / (period_bytes))
-#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
- ((buf_addr) + ((period_num) * (period_bytes)))
-
-#define RWF_STM_RD 0x01 /* Read in progress */
-#define RWF_STM_WT 0x02 /* Write in progress */
-
-struct siu_port *siu_ports[SIU_PORT_NUM];
-
-/* transfersize is number of u32 dma transfers per period */
-static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* output FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
- pr_debug("%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x0c180c18);
-
- /* during stmwrite clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static int siu_pcm_stmwrite_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->playback;
-
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- port_info->playback.cur_period = 0;
-
- /* during stmwrite flag set */
- siu_stream->rw_flg = RWF_STM_WT;
-
- /* DMA transfer start */
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static void siu_dma_tx_complete(void *arg)
-{
- struct siu_stream *siu_stream = arg;
-
- if (!siu_stream->rw_flg)
- return;
-
- /* Update completed period count */
- if (++siu_stream->cur_period >=
- GET_MAX_PERIODS(siu_stream->buf_bytes,
- siu_stream->period_bytes))
- siu_stream->cur_period = 0;
-
- pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
- __func__, siu_stream->cur_period,
- siu_stream->cur_period * siu_stream->period_bytes,
- siu_stream->buf_bytes, siu_stream->cookie);
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- /* Notify alsa: a period is done */
- snd_pcm_period_elapsed(siu_stream->substream);
-}
-
-static int siu_pcm_wr_set(struct siu_port *port_info,
- dma_addr_t buff, u32 size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate a dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit a dma transfer\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only output FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
-
- return 0;
-}
-
-static int siu_pcm_rd_set(struct siu_port *port_info,
- dma_addr_t buff, size_t size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit dma descriptor\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only input FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
- (port_info->stfifo & 0x13071307));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x13071307));
-
- return 0;
-}
-
-static void siu_io_work(struct work_struct *work)
-{
- struct siu_stream *siu_stream = container_of(work, struct siu_stream,
- work);
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
-
- if (!siu_stream->rw_flg) {
- dev_dbg(dev, "%s: stream inactive\n", __func__);
- return;
- }
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- dma_addr_t buff;
- size_t count;
-
- buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes);
- count = siu_stream->period_bytes;
-
- /* DMA transfer start */
- siu_pcm_rd_set(port_info, buff, count);
- } else {
- siu_pcm_wr_set(port_info,
- (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes),
- siu_stream->period_bytes);
- }
-}
-
-/* Capture */
-static int siu_pcm_stmread_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->capture;
-
- if (siu_stream->xfer_cnt > 0x1000000)
- return -EINVAL;
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- siu_stream->cur_period = 0;
-
- /* during stmread flag set */
- siu_stream->rw_flg = RWF_STM_RD;
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static int siu_pcm_stmread_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct device *dev = siu_stream->substream->pcm->card->dev;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* input FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x13071307);
-
- /* during stmread flag clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static bool filter(struct dma_chan *chan, void *secondary)
-{
- struct sh_dmae_slave *param = secondary;
-
- pr_debug("%s: secondary ID %d\n", __func__, param->shdma_slave.slave_id);
-
- chan->private = ¶m->shdma_slave;
- return true;
-}
-
-static int siu_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- /* Playback / Capture */
- struct siu_platform *pdata = component->dev->platform_data;
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
- u32 port = info->port_id;
- struct device *dev = ss->pcm->card->dev;
- dma_cap_mask_t mask;
- struct sh_dmae_slave *param;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- siu_stream = &port_info->playback;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_tx_b :
- pdata->dma_slave_tx_a;
- } else {
- siu_stream = &port_info->capture;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_rx_b :
- pdata->dma_slave_rx_a;
- }
-
- /* Get DMA channel */
- siu_stream->chan = dma_request_channel(mask, filter, param);
- if (!siu_stream->chan) {
- dev_err(dev, "DMA channel allocation failed!\n");
- return -EBUSY;
- }
-
- siu_stream->substream = ss;
-
- return 0;
-}
-
-static int siu_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
-
- dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- dma_release_channel(siu_stream->chan);
- siu_stream->chan = NULL;
-
- siu_stream->substream = NULL;
-
- return 0;
-}
-
-static int siu_pcm_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct device *dev = ss->pcm->card->dev;
- struct snd_pcm_runtime *rt;
- struct siu_stream *siu_stream;
- snd_pcm_sframes_t xfer_cnt;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- rt = siu_stream->substream->runtime;
-
- siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
- siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
-
- dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
- info->port_id, rt->channels, siu_stream->period_bytes);
-
- /* We only support buffers that are multiples of the period */
- if (siu_stream->buf_bytes % siu_stream->period_bytes) {
- dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
- __func__, siu_stream->buf_bytes,
- siu_stream->period_bytes);
- return -EINVAL;
- }
-
- xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
- if (!xfer_cnt || xfer_cnt > 0x1000000)
- return -EINVAL;
-
- siu_stream->format = rt->format;
- siu_stream->xfer_cnt = xfer_cnt;
-
- dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
- "format=%d channels=%d xfer_cnt=%d\n", info->port_id,
- (unsigned long)rt->dma_addr, siu_stream->buf_bytes,
- siu_stream->period_bytes,
- siu_stream->format, rt->channels, (int)xfer_cnt);
-
- return 0;
-}
-
-static int siu_pcm_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *ss, int cmd)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- int ret;
-
- dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
- info->port_id, port_info, cmd);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ret = siu_pcm_stmwrite_start(port_info);
- else
- ret = siu_pcm_stmread_start(port_info);
-
- if (ret < 0)
- dev_warn(dev, "%s: start failed on port=%d\n",
- __func__, info->port_id);
-
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_pcm_stmwrite_stop(port_info);
- else
- siu_pcm_stmread_stop(port_info);
- ret = 0;
-
- break;
- default:
- dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * So far only resolution of one period is supported, subject to extending the
- * dmangine API
- */
-static snd_pcm_uframes_t
-siu_pcm_pointer_dma(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct device *dev = ss->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_port *port_info = siu_port_info(ss);
- struct snd_pcm_runtime *rt = ss->runtime;
- size_t ptr;
- struct siu_stream *siu_stream;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- /*
- * ptr is the offset into the buffer where the dma is currently at. We
- * check if the dma buffer has just wrapped.
- */
- ptr = PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes) - rt->dma_addr;
-
- dev_dbg(dev,
- "%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
- __func__, info->port_id, siu_read32(base + SIU_EVNTC),
- siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
- siu_stream->cookie);
-
- if (ptr >= siu_stream->buf_bytes)
- ptr = 0;
-
- return bytes_to_frames(ss->runtime, ptr);
-}
-
-static int siu_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- /* card->dev == socdev->dev, see snd_soc_new_pcms() */
- struct snd_card *card = rtd->card->snd_card;
- struct snd_pcm *pcm = rtd->pcm;
- struct siu_info *info = siu_i2s_data;
- struct platform_device *pdev = to_platform_device(card->dev);
- int ret;
- int i;
-
- /* pdev->id selects between SIUA and SIUB */
- if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
- return -EINVAL;
-
- info->port_id = pdev->id;
-
- /*
- * While the siu has 2 ports, only one port can be on at a time (only 1
- * SPB). So far all the boards using the siu had only one of the ports
- * wired to a codec. To simplify things, we only register one port with
- * alsa. In case both ports are needed, it should be changed here
- */
- for (i = pdev->id; i < pdev->id + 1; i++) {
- struct siu_port **port_info = &siu_ports[i];
-
- ret = siu_init_port(i, port_info, card);
- if (ret < 0)
- return ret;
-
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_DEV, card->dev,
- SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
-
- (*port_info)->pcm = pcm;
-
- /* IO works */
- INIT_WORK(&(*port_info)->playback.work, siu_io_work);
- INIT_WORK(&(*port_info)->capture.work, siu_io_work);
- }
-
- dev_info(card->dev, "SuperH SIU driver initialized.\n");
- return 0;
-}
-
-static void siu_pcm_free(struct snd_soc_component *component,
- struct snd_pcm *pcm)
-{
- struct platform_device *pdev = to_platform_device(pcm->card->dev);
- struct siu_port *port_info = siu_ports[pdev->id];
-
- cancel_work_sync(&port_info->capture.work);
- cancel_work_sync(&port_info->playback.work);
-
- siu_free_port(port_info);
-
- dev_dbg(pcm->card->dev, "%s\n", __func__);
-}
-
-const struct snd_soc_component_driver siu_component = {
- .name = DRV_NAME,
- .open = siu_pcm_open,
- .close = siu_pcm_close,
- .prepare = siu_pcm_prepare,
- .trigger = siu_pcm_trigger,
- .pointer = siu_pcm_pointer_dma,
- .pcm_construct = siu_pcm_new,
- .pcm_destruct = siu_pcm_free,
- .legacy_dai_naming = 1,
-};
-EXPORT_SYMBOL_GPL(siu_component);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
deleted file mode 100644
index 96cf523c227343..00000000000000
--- a/sound/soc/sh/ssi.c
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Serial Sound Interface (I2S) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable SSI output pins!
-
-/*
- * LIMITATIONS:
- * The SSI unit has only one physical data line, so full duplex is
- * impossible. This can be remedied on the SH7760 by using the
- * other SSI unit for recording; however the SH7780 has only 1 SSI
- * unit, and its pins are shared with the AC97 unit, among others.
- *
- * FEATURES:
- * The SSI features "compressed mode": in this mode it continuously
- * streams PCM data over the I2S lines and uses LRCK as a handshake
- * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
- * The number of bits sent over the wire in a frame can be adjusted
- * and can be independent from the actual sample bit depth. This is
- * useful to support TDM mode codecs like the AD1939 which have a
- * fixed TDM slot size, regardless of sample resolution.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define SSICR 0x00
-#define SSISR 0x04
-
-#define CR_DMAEN (1 << 28)
-#define CR_CHNL_SHIFT 22
-#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
-#define CR_DWL_SHIFT 19
-#define CR_DWL_MASK (7 << CR_DWL_SHIFT)
-#define CR_SWL_SHIFT 16
-#define CR_SWL_MASK (7 << CR_SWL_SHIFT)
-#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
-#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
-#define CR_SCKP (1 << 13) /* I2Sclock polarity */
-#define CR_SWSP (1 << 12) /* LRCK polarity */
-#define CR_SPDP (1 << 11)
-#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
-#define CR_PDTA (1 << 9) /* fifo data alignment */
-#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
-#define CR_BREN (1 << 7) /* clock gating in burst mode */
-#define CR_CKDIV_SHIFT 4
-#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
-#define CR_MUTE (1 << 3) /* SSI mute */
-#define CR_CPEN (1 << 2) /* compressed mode */
-#define CR_TRMD (1 << 1) /* transmit/receive select */
-#define CR_EN (1 << 0) /* enable SSI */
-
-#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
-
-struct ssi_priv {
- unsigned long mmio;
- unsigned long sysclk;
- int inuse;
-} ssi_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE680000,
- },
- {
- .mmio = 0xFE690000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE70000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-/*
- * track usage of the SSI; it is simplex-only so prevent attempts of
- * concurrent playback + capture. FIXME: any locking required?
- */
-static int ssi_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- if (ssi->inuse) {
- pr_debug("ssi: already in use!\n");
- return -EBUSY;
- } else
- ssi->inuse = 1;
- return 0;
-}
-
-static void ssi_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- ssi->inuse = 0;
-}
-
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- SSIREG(SSICR) |= CR_DMAEN | CR_EN;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
- unsigned int bits, channels, swl, recv, i;
-
- channels = params_channels(params);
- bits = params->msbits;
- recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
-
- pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
- pr_debug("bits: %u channels: %u\n", bits, channels);
-
- ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
- CR_SWL_MASK);
-
- /* direction (send/receive) */
- if (!recv)
- ssicr |= CR_TRMD; /* transmit */
-
- /* channels */
- if ((channels < 2) || (channels > 8) || (channels & 1)) {
- pr_debug("ssi: invalid number of channels\n");
- return -EINVAL;
- }
- ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
-
- /* DATA WORD LENGTH (DWL): databits in audio sample */
- i = 0;
- switch (bits) {
- case 32: ++i;
- case 24: ++i;
- case 22: ++i;
- case 20: ++i;
- case 18: ++i;
- case 16: ++i;
- ssicr |= i << CR_DWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid sample width\n");
- return -EINVAL;
- }
-
- /*
- * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
- * wires. This is usually bits_per_sample x channels/2; i.e. in
- * Stereo mode the SWL equals DWL. SWL can be bigger than the
- * product of (channels_per_slot x samplebits), e.g. for codecs
- * like the AD1939 which only accept 32bit wide TDM slots. For
- * "standard" I2S operation we set SWL = chans / 2 * DWL here.
- * Waiting for ASoC to get TDM support ;-)
- */
- if ((bits > 16) && (bits <= 24)) {
- bits = 24; /* these are padded by the SSI */
- /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
- }
- i = 0;
- swl = (bits * channels) / 2;
- switch (swl) {
- case 256: ++i;
- case 128: ++i;
- case 64: ++i;
- case 48: ++i;
- case 32: ++i;
- case 16: ++i;
- ssicr |= i << CR_SWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid system word length computed\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
-
- pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
- return 0;
-}
-
-static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
-
- ssi->sysclk = freq;
-
- return 0;
-}
-
-/*
- * This divider is used to generate the SSI_SCK (I2S bitclock) from the
- * clock at the HAC_BIT_CLK ("oversampling clock") pin.
- */
-static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr;
- int i;
-
- i = 0;
- ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
- switch (div) {
- case 16: ++i;
- case 8: ++i;
- case 4: ++i;
- case 2: ++i;
- SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
- case 1: break;
- default:
- pr_debug("ssi: invalid sck divider %d\n", div);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
-
- pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
-
- ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
- CR_SWS_MASTER | CR_SCK_MASTER);
-
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- ssicr |= CR_DEL | CR_PDTA;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ssicr |= CR_DEL;
- break;
- default:
- pr_debug("ssi: unsupported format\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
- case SND_SOC_DAIFMT_CONT:
- break;
- case SND_SOC_DAIFMT_GATED:
- ssicr |= CR_BREN;
- break;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- ssicr |= CR_SCKP; /* sample data at low clkedge */
- break;
- case SND_SOC_DAIFMT_NB_IF:
- ssicr |= CR_SCKP | CR_SWSP;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- ssicr |= CR_SWSP; /* word select starts low */
- break;
- default:
- pr_debug("ssi: invalid inversion\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
- case SND_SOC_DAIFMT_BC_FC:
- break;
- case SND_SOC_DAIFMT_BP_FC:
- ssicr |= CR_SCK_MASTER;
- break;
- case SND_SOC_DAIFMT_BC_FP:
- ssicr |= CR_SWS_MASTER;
- break;
- case SND_SOC_DAIFMT_BP_FP:
- ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
- break;
- default:
- pr_debug("ssi: invalid master/secondary configuration\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
- pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
-
- return 0;
-}
-
-/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
- * Master mode, so really this is board specific; the SSI can do any
- * rate with the right bitclk and divider settings.
- */
-#define SSI_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-/* the SSI can do 8-32 bit samples, with 8 possible channels */
-#define SSI_FMTS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
- SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
- SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
- SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
-
-static const struct snd_soc_dai_ops ssi_dai_ops = {
- .startup = ssi_startup,
- .shutdown = ssi_shutdown,
- .trigger = ssi_trigger,
- .hw_params = ssi_hw_params,
- .set_sysclk = ssi_set_sysclk,
- .set_clkdiv = ssi_set_clkdiv,
- .set_fmt = ssi_set_fmt,
-};
-
-static struct snd_soc_dai_driver sh4_ssi_dai[] = {
-{
- .name = "ssi-dai.0",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "ssi-dai.1",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_ssi_component = {
- .name = "sh4-ssi",
- .legacy_dai_naming = 1,
-};
-
-static int sh4_soc_dai_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
- sh4_ssi_dai,
- ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static struct platform_driver sh4_ssi_driver = {
- .driver = {
- .name = "sh4-ssi-dai",
- },
-
- .probe = sh4_soc_dai_probe,
-};
-
-module_platform_driver(sh4_ssi_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/soc/sh/Kconfig | 44 --
sound/soc/sh/Makefile | 16 -
sound/soc/sh/dma-sh7760.c | 334 ----------------
sound/soc/sh/fsi.c | 9 -
sound/soc/sh/hac.c | 345 ----------------
sound/soc/sh/migor.c | 205 ----------
sound/soc/sh/sh7760-ac97.c | 72 ----
sound/soc/sh/siu.h | 180 ---------
sound/soc/sh/siu_dai.c | 799 -------------------------------------
sound/soc/sh/siu_pcm.c | 553 -------------------------
sound/soc/sh/ssi.c | 403 -------------------
11 files changed, 2960 deletions(-)
delete mode 100644 sound/soc/sh/dma-sh7760.c
delete mode 100644 sound/soc/sh/hac.c
delete mode 100644 sound/soc/sh/migor.c
delete mode 100644 sound/soc/sh/sh7760-ac97.c
delete mode 100644 sound/soc/sh/siu.h
delete mode 100644 sound/soc/sh/siu_dai.c
delete mode 100644 sound/soc/sh/siu_pcm.c
delete mode 100644 sound/soc/sh/ssi.c
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 793a0326f32b46..4367927b81df20 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -2,25 +2,10 @@
menu "SoC Audio support for Renesas SoCs"
depends on ARCH_RENESAS || COMPILE_TEST
-config SND_SOC_PCM_SH7760
- tristate "SoC Audio support for Renesas SH7760"
- depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
- help
- Enable this option for SH7760 AC97/I2S audio support.
-
-
##
## Audio unit modules
##
-config SND_SOC_SH4_HAC
- tristate
- select AC97_BUS
- select SND_SOC_AC97_BUS
-
-config SND_SOC_SH4_SSI
- tristate
-
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
depends on COMMON_CLK
@@ -28,14 +13,6 @@ config SND_SOC_SH4_FSI
help
This option enables FSI sound support
-config SND_SOC_SH4_SIU
- tristate
- depends on ARCH_SHMOBILE && HAVE_CLK
- depends on DMADEVICES
- select DMA_ENGINE
- select SH_DMAE
- select FW_LOADER
-
config SND_SOC_RCAR
tristate "R-Car series SRU/SCU/SSIU/SSI support"
depends on COMMON_CLK
@@ -51,25 +28,4 @@ config SND_SOC_RZ
help
This option enables RZ/G2L SSIF-2 sound support.
-##
-## Boards
-##
-
-config SND_SH7760_AC97
- tristate "SH7760 AC97 sound support"
- depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760
- select SND_SOC_SH4_HAC
- select SND_SOC_AC97_CODEC
- help
- This option enables generic sound support for the first
- AC97 unit of the SH7760.
-
-config SND_SIU_MIGOR
- tristate "SIU sound support on Migo-R"
- depends on SH_MIGOR && I2C
- select SND_SOC_SH4_SIU
- select SND_SOC_WM8978
- help
- This option enables sound support for the SH7722 Migo-R board
-
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index f6fd79948f6ae9..c308dda887e633 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -1,28 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
-## DMA engines
-snd-soc-dma-sh7760-objs := dma-sh7760.o
-obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o
## audio units found on some SH-4
-snd-soc-hac-objs := hac.o
-snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
-snd-soc-siu-objs := siu_pcm.o siu_dai.o
-obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
-obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
-obj-$(CONFIG_SND_SOC_SH4_SIU) += snd-soc-siu.o
## audio units for R-Car
obj-$(CONFIG_SND_SOC_RCAR) += rcar/
-## boards
-snd-soc-sh7760-ac97-objs := sh7760-ac97.o
-snd-soc-migor-objs := migor.o
-
-obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
-obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
-
# RZ/G2L
snd-soc-rz-ssi-objs := rz-ssi.o
obj-$(CONFIG_SND_SOC_RZ) += snd-soc-rz-ssi.o
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
deleted file mode 100644
index 121e48f984c50c..00000000000000
--- a/sound/soc/sh/dma-sh7760.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// SH7760 ("camelot") DMABRG audio DMA unit support
-//
-// Copyright (C) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which
-// trigger an interrupt when one half of the programmed transfer size
-// has been xmitted.
-//
-// FIXME: little-endian only for now
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dmabrg.h>
-
-
-/* registers and bits */
-#define BRGATXSAR 0x00
-#define BRGARXDAR 0x04
-#define BRGATXTCR 0x08
-#define BRGARXTCR 0x0C
-#define BRGACR 0x10
-#define BRGATXTCNT 0x14
-#define BRGARXTCNT 0x18
-
-#define ACR_RAR (1 << 18)
-#define ACR_RDS (1 << 17)
-#define ACR_RDE (1 << 16)
-#define ACR_TAR (1 << 2)
-#define ACR_TDS (1 << 1)
-#define ACR_TDE (1 << 0)
-
-/* receiver/transmitter data alignment */
-#define ACR_RAM_NONE (0 << 24)
-#define ACR_RAM_4BYTE (1 << 24)
-#define ACR_RAM_2WORD (2 << 24)
-#define ACR_TAM_NONE (0 << 8)
-#define ACR_TAM_4BYTE (1 << 8)
-#define ACR_TAM_2WORD (2 << 8)
-
-
-struct camelot_pcm {
- unsigned long mmio; /* DMABRG audio channel control reg MMIO */
- unsigned int txid; /* ID of first DMABRG IRQ for this unit */
-
- struct snd_pcm_substream *tx_ss;
- unsigned long tx_period_size;
- unsigned int tx_period;
-
- struct snd_pcm_substream *rx_ss;
- unsigned long rx_period_size;
- unsigned int rx_period;
-
-} cam_pcm_data[2] = {
- {
- .mmio = 0xFE3C0040,
- .txid = DMABRGIRQ_A0TXF,
- },
- {
- .mmio = 0xFE3C0060,
- .txid = DMABRGIRQ_A1TXF,
- },
-};
-
-#define BRGREG(x) (*(unsigned long *)(cam->mmio + (x)))
-
-/*
- * set a minimum of 16kb per period, to avoid interrupt-"storm" and
- * resulting skipping. In general, the bigger the minimum size, the
- * better for overall system performance. (The SH7760 is a puny CPU
- * with a slow SDRAM interface and poor internal bus bandwidth,
- * *especially* when the LCDC is active). The minimum for the DMAC
- * is 8 bytes; 16kbytes are enough to get skip-free playback of a
- * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain
- * reasonable responsiveness in MPlayer.
- */
-#define DMABRG_PERIOD_MIN 16 * 1024
-#define DMABRG_PERIOD_MAX 0x03fffffc
-#define DMABRG_PREALLOC_BUFFER 32 * 1024
-#define DMABRG_PREALLOC_BUFFER_MAX 32 * 1024
-
-static const struct snd_pcm_hardware camelot_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_BATCH),
- .buffer_bytes_max = DMABRG_PERIOD_MAX,
- .period_bytes_min = DMABRG_PERIOD_MIN,
- .period_bytes_max = DMABRG_PERIOD_MAX / 2,
- .periods_min = 2,
- .periods_max = 2,
- .fifo_size = 128,
-};
-
-static void camelot_txdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->tx_period ^= 1;
- snd_pcm_period_elapsed(cam->tx_ss);
-}
-
-static void camelot_rxdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->rx_period ^= 1;
- snd_pcm_period_elapsed(cam->rx_ss);
-}
-
-static int camelot_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int ret, dmairq;
-
- snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware);
-
- /* DMABRG buffer half/full events */
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
- if (recv) {
- cam->rx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
- } else {
- cam->tx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
- }
- return 0;
-}
-
-static int camelot_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int dmairq;
-
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
-
- if (recv)
- cam->rx_ss = NULL;
- else
- cam->tx_ss = NULL;
-
- dmabrg_free_irq(dmairq + 1);
- dmabrg_free_irq(dmairq);
-
- return 0;
-}
-
-static int camelot_hw_params(struct snd_soc_component *component,
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- if (recv) {
- cam->rx_period_size = params_period_bytes(hw_params);
- cam->rx_period = 0;
- } else {
- cam->tx_period_size = params_period_bytes(hw_params);
- cam->tx_period = 0;
- }
- return 0;
-}
-
-static int camelot_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-
- pr_debug("PCM data: addr 0x%08lx len %d\n",
- (u32)runtime->dma_addr, runtime->dma_bytes);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGATXTCR) = runtime->dma_bytes;
- } else {
- BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGARXTCR) = runtime->dma_bytes;
- }
-
- return 0;
-}
-
-static inline void dmabrg_play_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: XFER start, auto-addr-reload */
- BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD;
-}
-
-static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data transmission */
- BRGREG(BRGACR) = acr | ACR_TDS;
-}
-
-static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: recv start, auto-reload */
- BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD;
-}
-
-static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data receiver */
- BRGREG(BRGACR) = acr | ACR_RDS;
-}
-
-static int camelot_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (recv)
- dmabrg_rec_dma_start(cam);
- else
- dmabrg_play_dma_start(cam);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (recv)
- dmabrg_rec_dma_stop(cam);
- else
- dmabrg_play_dma_stop(cam);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- unsigned long pos;
-
- /* cannot use the DMABRG pointer register: under load, by the
- * time ALSA comes around to read the register, it is already
- * far ahead (or worse, already done with the fragment) of the
- * position at the time the IRQ was triggered, which results in
- * fast-playback sound in my test application (ScummVM)
- */
- if (recv)
- pos = cam->rx_period ? cam->rx_period_size : 0;
- else
- pos = cam->tx_period ? cam->tx_period_size : 0;
-
- return bytes_to_frames(runtime, pos);
-}
-
-static int camelot_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_pcm *pcm = rtd->pcm;
-
- /* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
- * in MMAP mode (i.e. aplay -M)
- */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- DMABRG_PREALLOC_BUFFER, DMABRG_PREALLOC_BUFFER_MAX);
-
- return 0;
-}
-
-static const struct snd_soc_component_driver sh7760_soc_component = {
- .open = camelot_pcm_open,
- .close = camelot_pcm_close,
- .hw_params = camelot_hw_params,
- .prepare = camelot_prepare,
- .trigger = camelot_trigger,
- .pointer = camelot_pos,
- .pcm_construct = camelot_pcm_new,
-};
-
-static int sh7760_soc_platform_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh7760_soc_component,
- NULL, 0);
-}
-
-static struct platform_driver sh7760_pcm_driver = {
- .driver = {
- .name = "sh7760-pcm-audio",
- },
-
- .probe = sh7760_soc_platform_probe,
-};
-
-module_platform_driver(sh7760_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index f3edc2e3d9d7c4..c599070f2210f4 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1372,16 +1372,7 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
{
int is_play = fsi_stream_is_play(fsi, io);
-#ifdef CONFIG_SUPERH
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- io->chan = dma_request_channel(mask, shdma_chan_filter,
- (void *)io->dma_id);
-#else
io->chan = dma_request_slave_channel(dev, is_play ? "tx" : "rx");
-#endif
if (io->chan) {
struct dma_slave_config cfg = {};
int ret;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
deleted file mode 100644
index 46d145cbaf2970..00000000000000
--- a/sound/soc/sh/hac.c
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Hitachi Audio Controller (AC97) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable HAC output pins!
-
-/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use. You'll have
- * to edit the code a bit to use the other AC97 unit. --mlau
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-/* regs and bits */
-#define HACCR 0x08
-#define HACCSAR 0x20
-#define HACCSDR 0x24
-#define HACPCML 0x28
-#define HACPCMR 0x2C
-#define HACTIER 0x50
-#define HACTSR 0x54
-#define HACRIER 0x58
-#define HACRSR 0x5C
-#define HACACR 0x60
-
-#define CR_CR (1 << 15) /* "codec-ready" indicator */
-#define CR_CDRT (1 << 11) /* cold reset */
-#define CR_WMRT (1 << 10) /* warm reset */
-#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
-#define CR_ST (1 << 5) /* AC97 link start bit */
-
-#define CSAR_RD (1 << 19) /* AC97 data read bit */
-#define CSAR_WR (0)
-
-#define TSR_CMDAMT (1 << 31)
-#define TSR_CMDDMT (1 << 30)
-
-#define RSR_STARY (1 << 22)
-#define RSR_STDRY (1 << 21)
-
-#define ACR_DMARX16 (1 << 30)
-#define ACR_DMATX16 (1 << 29)
-#define ACR_TX12ATOM (1 << 26)
-#define ACR_DMARX20 ((1 << 24) | (1 << 22))
-#define ACR_DMATX20 ((1 << 23) | (1 << 21))
-
-#define CSDR_SHIFT 4
-#define CSDR_MASK (0xffff << CSDR_SHIFT)
-#define CSAR_SHIFT 12
-#define CSAR_MASK (0x7f << CSAR_SHIFT)
-
-#define AC97_WRITE_RETRY 1
-#define AC97_READ_RETRY 5
-
-/* manual-suggested AC97 codec access timeouts (us) */
-#define TMO_E1 500 /* 21 < E1 < 1000 */
-#define TMO_E2 13 /* 13 < E2 */
-#define TMO_E3 21 /* 21 < E3 */
-#define TMO_E4 500 /* 21 < E4 < 1000 */
-
-struct hac_priv {
- unsigned long mmio; /* HAC base address */
-} hac_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE240000,
- },
- {
- .mmio = 0xFE250000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE40000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
-
-/*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
-static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
- unsigned short *v)
-{
- unsigned int to1, to2, i;
- unsigned short adr;
-
- for (i = AC97_READ_RETRY; i; i--) {
- *v = 0;
- /* wait for HAC to receive something from the codec */
- for (to1 = TMO_E4;
- to1 && !(HACREG(HACRSR) & RSR_STARY);
- --to1)
- udelay(1);
- for (to2 = TMO_E4;
- to2 && !(HACREG(HACRSR) & RSR_STDRY);
- --to2)
- udelay(1);
-
- if (!to1 && !to2)
- return 0; /* codec comm is down */
-
- adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
- *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
-
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-
- if (r == adr)
- break;
-
- /* manual says: wait at least 21 usec before retrying */
- udelay(21);
- }
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- return i;
-}
-
-static unsigned short hac_read_codec_aux(struct hac_priv *hac,
- unsigned short reg)
-{
- unsigned short val;
- unsigned int i, to;
-
- for (i = AC97_READ_RETRY; i; i--) {
- /* send_read_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDAMT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
- local_irq_enable();
-
- for (to = TMO_E3;
- to && !(HACREG(HACTSR) & TSR_CMDAMT);
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~TSR_CMDAMT;
- val = 0;
- if (hac_get_codec_data(hac, reg, &val) != 0)
- break;
- }
-
- return i ? val : ~0;
-}
-
-static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int i, to;
- /* write_codec_aux */
- for (i = AC97_WRITE_RETRY; i; i--) {
- /* send_write_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
- HACREG(HACCSDR) = (val << CSDR_SHIFT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
- local_irq_enable();
-
- /* poll-wait for CMDAMT and CMDDMT */
- for (to = TMO_E1;
- to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
- if (to)
- break;
- /* timeout, try again */
- }
-}
-
-static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- return hac_read_codec_aux(hac, reg);
-}
-
-static void hac_ac97_warmrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int tmo;
-
- HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
- msleep(10);
- HACREG(HACCR) = CR_ST | CR_B9;
- for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
- udelay(1);
-
- if (!tmo)
- printk(KERN_INFO "hac: reset: AC97 link down!\n");
- /* settings this bit lets us have a conversation with codec */
- HACREG(HACACR) |= ACR_TX12ATOM;
-}
-
-static void hac_ac97_coldrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac;
- hac = &hac_cpu_data[unit_id];
-
- HACREG(HACCR) = 0;
- HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
- msleep(10);
- hac_ac97_warmrst(ac97);
-}
-
-static struct snd_ac97_bus_ops hac_ac97_ops = {
- .read = hac_ac97_read,
- .write = hac_ac97_write,
- .reset = hac_ac97_coldrst,
- .warm_reset = hac_ac97_warmrst,
-};
-
-static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct hac_priv *hac = &hac_cpu_data[dai->id];
- int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- switch (params->msbits) {
- case 16:
- HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
- HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
- break;
- case 20:
- HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
- HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
- break;
- default:
- pr_debug("hac: invalid depth %d bit\n", params->msbits);
- return -EINVAL;
- break;
- }
-
- return 0;
-}
-
-#define AC97_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-#define AC97_FMTS \
- SNDRV_PCM_FMTBIT_S16_LE
-
-static const struct snd_soc_dai_ops hac_dai_ops = {
- .hw_params = hac_hw_params,
-};
-
-static struct snd_soc_dai_driver sh4_hac_dai[] = {
-{
- .name = "hac-dai.0",
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "hac-dai.1",
- .id = 1,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_hac_component = {
- .name = "sh4-hac",
- .legacy_dai_naming = 1,
-};
-
-static int hac_soc_platform_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
- if (ret != 0)
- return ret;
-
- return devm_snd_soc_register_component(&pdev->dev, &sh4_hac_component,
- sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
-}
-
-static int hac_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_set_ac97_ops(NULL);
- return 0;
-}
-
-static struct platform_driver hac_pcm_driver = {
- .driver = {
- .name = "hac-pcm-audio",
- },
-
- .probe = hac_soc_platform_probe,
- .remove = hac_soc_platform_remove,
-};
-
-module_platform_driver(hac_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
deleted file mode 100644
index 7082c12d3bf238..00000000000000
--- a/sound/soc/sh/migor.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// ALSA SoC driver for Migo-R
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-#include <linux/clkdev.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-
-#include <cpu/sh7722.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "../codecs/wm8978.h"
-#include "siu.h"
-
-/* Default 8000Hz sampling frequency */
-static unsigned long codec_freq = 8000 * 512;
-
-static unsigned int use_count;
-
-/* External clock, sourced from the codec at the SIUMCKB pin */
-static unsigned long siumckb_recalc(struct clk *clk)
-{
- return codec_freq;
-}
-
-static struct sh_clk_ops siumckb_clk_ops = {
- .recalc = siumckb_recalc,
-};
-
-static struct clk siumckb_clk = {
- .ops = &siumckb_clk_ops,
- .rate = 0, /* initialised at run-time */
-};
-
-static struct clk_lookup *siumckb_lookup;
-
-static int migor_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- int ret;
- unsigned int rate = params_rate(params);
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
- if (ret < 0)
- return ret;
-
- codec_freq = rate * 512;
- /*
- * This propagates the parent frequency change to children and
- * recalculates the frequency table
- */
- clk_set_rate(&siumckb_clk, codec_freq);
- dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
-
- ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
- codec_freq / 2, SND_SOC_CLOCK_IN);
-
- if (!ret)
- use_count++;
-
- return ret;
-}
-
-static int migor_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-
- if (use_count) {
- use_count--;
-
- if (!use_count)
- snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
- SND_SOC_CLOCK_IN);
- } else {
- dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
- }
-
- return 0;
-}
-
-static const struct snd_soc_ops migor_dai_ops = {
- .hw_params = migor_hw_params,
- .hw_free = migor_hw_free,
-};
-
-static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
- SND_SOC_DAPM_HP("Headphone", NULL),
- SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
- SND_SOC_DAPM_MIC("External Microphone", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
- { "Headphone", NULL, "OUT4 VMID" },
- { "OUT4 VMID", NULL, "LHP" },
- { "OUT4 VMID", NULL, "RHP" },
-
- /* On-board microphone */
- { "RMICN", NULL, "Mic Bias" },
- { "RMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "Onboard Microphone" },
-
- /* External microphone */
- { "LMICN", NULL, "Mic Bias" },
- { "LMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "External Microphone" },
-};
-
-/* migor digital audio interface glue - connects codec <--> CPU */
-SND_SOC_DAILINK_DEFS(wm8978,
- DAILINK_COMP_ARRAY(COMP_CPU("siu-pcm-audio")),
- DAILINK_COMP_ARRAY(COMP_CODEC("wm8978.0-001a", "wm8978-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("siu-pcm-audio")));
-
-static struct snd_soc_dai_link migor_dai = {
- .name = "wm8978",
- .stream_name = "WM8978",
- .dai_fmt = SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBS_CFS,
- .ops = &migor_dai_ops,
- SND_SOC_DAILINK_REG(wm8978),
-};
-
-/* migor audio machine driver */
-static struct snd_soc_card snd_soc_migor = {
- .name = "Migo-R",
- .owner = THIS_MODULE,
- .dai_link = &migor_dai,
- .num_links = 1,
-
- .dapm_widgets = migor_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(migor_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
-static struct platform_device *migor_snd_device;
-
-static int __init migor_init(void)
-{
- int ret;
-
- ret = clk_register(&siumckb_clk);
- if (ret < 0)
- return ret;
-
- siumckb_lookup = clkdev_create(&siumckb_clk, "siumckb_clk", NULL);
- if (!siumckb_lookup) {
- ret = -ENOMEM;
- goto eclkdevalloc;
- }
-
- /* Port number used on this machine: port B */
- migor_snd_device = platform_device_alloc("soc-audio", 1);
- if (!migor_snd_device) {
- ret = -ENOMEM;
- goto epdevalloc;
- }
-
- platform_set_drvdata(migor_snd_device, &snd_soc_migor);
-
- ret = platform_device_add(migor_snd_device);
- if (ret)
- goto epdevadd;
-
- return 0;
-
-epdevadd:
- platform_device_put(migor_snd_device);
-epdevalloc:
- clkdev_drop(siumckb_lookup);
-eclkdevalloc:
- clk_unregister(&siumckb_clk);
- return ret;
-}
-
-static void __exit migor_exit(void)
-{
- clkdev_drop(siumckb_lookup);
- clk_unregister(&siumckb_clk);
- platform_device_unregister(migor_snd_device);
-}
-
-module_init(migor_init);
-module_exit(migor_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("ALSA SoC Migor");
-MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
deleted file mode 100644
index d267243a159ba6..00000000000000
--- a/sound/soc/sh/sh7760-ac97.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Generic AC97 sound support for SH7760
-//
-// (c) 2007 Manuel Lauss
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define IPSEL 0xFE400034
-
-SND_SOC_DAILINK_DEFS(ac97,
- DAILINK_COMP_ARRAY(COMP_CPU("hac-dai.0")), /* HAC0 */
- DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("sh7760-pcm-audio")));
-
-static struct snd_soc_dai_link sh7760_ac97_dai = {
- .name = "AC97",
- .stream_name = "AC97 HiFi",
- SND_SOC_DAILINK_REG(ac97),
-};
-
-static struct snd_soc_card sh7760_ac97_soc_machine = {
- .name = "SH7760 AC97",
- .owner = THIS_MODULE,
- .dai_link = &sh7760_ac97_dai,
- .num_links = 1,
-};
-
-static struct platform_device *sh7760_ac97_snd_device;
-
-static int __init sh7760_ac97_init(void)
-{
- int ret;
- unsigned short ipsel;
-
- /* enable both AC97 controllers in pinmux reg */
- ipsel = __raw_readw(IPSEL);
- __raw_writew(ipsel | (3 << 10), IPSEL);
-
- ret = -ENOMEM;
- sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1);
- if (!sh7760_ac97_snd_device)
- goto out;
-
- platform_set_drvdata(sh7760_ac97_snd_device,
- &sh7760_ac97_soc_machine);
- ret = platform_device_add(sh7760_ac97_snd_device);
-
- if (ret)
- platform_device_put(sh7760_ac97_snd_device);
-
-out:
- return ret;
-}
-
-static void __exit sh7760_ac97_exit(void)
-{
- platform_device_unregister(sh7760_ac97_snd_device);
-}
-
-module_init(sh7760_ac97_init);
-module_exit(sh7760_ac97_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
deleted file mode 100644
index a675c36fc9d956..00000000000000
--- a/sound/soc/sh/siu.h
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#ifndef SIU_H
-#define SIU_H
-
-/* Common kernel and user-space firmware-building defines and types */
-
-#define YRAM0_SIZE (0x0040 / 4) /* 16 */
-#define YRAM1_SIZE (0x0080 / 4) /* 32 */
-#define YRAM2_SIZE (0x0040 / 4) /* 16 */
-#define YRAM3_SIZE (0x0080 / 4) /* 32 */
-#define YRAM4_SIZE (0x0080 / 4) /* 32 */
-#define YRAM_DEF_SIZE (YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
- YRAM3_SIZE + YRAM4_SIZE)
-#define YRAM_FIR_SIZE (0x0400 / 4) /* 256 */
-#define YRAM_IIR_SIZE (0x0200 / 4) /* 128 */
-
-#define XRAM0_SIZE (0x0400 / 4) /* 256 */
-#define XRAM1_SIZE (0x0200 / 4) /* 128 */
-#define XRAM2_SIZE (0x0200 / 4) /* 128 */
-
-/* PRAM program array size */
-#define PRAM0_SIZE (0x0100 / 4) /* 64 */
-#define PRAM1_SIZE ((0x2000 - 0x0100) / 4) /* 1984 */
-
-#include <linux/types.h>
-
-struct siu_spb_param {
- __u32 ab1a; /* input FIFO address */
- __u32 ab0a; /* output FIFO address */
- __u32 dir; /* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
- __u32 event; /* SPB program starting conditions */
- __u32 stfifo; /* STFIFO register setting value */
- __u32 trdat; /* TRDAT register setting value */
-};
-
-struct siu_firmware {
- __u32 yram_fir_coeff[YRAM_FIR_SIZE];
- __u32 pram0[PRAM0_SIZE];
- __u32 pram1[PRAM1_SIZE];
- __u32 yram0[YRAM0_SIZE];
- __u32 yram1[YRAM1_SIZE];
- __u32 yram2[YRAM2_SIZE];
- __u32 yram3[YRAM3_SIZE];
- __u32 yram4[YRAM4_SIZE];
- __u32 spbpar_num;
- struct siu_spb_param spbpar[32];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sh_dma.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#define SIU_PERIOD_BYTES_MAX 8192 /* DMA transfer/period size */
-#define SIU_PERIOD_BYTES_MIN 256 /* DMA transfer/period size */
-#define SIU_PERIODS_MAX 64 /* Max periods in buffer */
-#define SIU_PERIODS_MIN 4 /* Min periods in buffer */
-#define SIU_BUFFER_BYTES_MAX (SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
-
-/* SIU ports: only one can be used at a time */
-enum {
- SIU_PORT_A,
- SIU_PORT_B,
- SIU_PORT_NUM,
-};
-
-/* SIU clock configuration */
-enum {
- SIU_CLKA_PLL,
- SIU_CLKA_EXT,
- SIU_CLKB_PLL,
- SIU_CLKB_EXT
-};
-
-struct device;
-struct siu_info {
- struct device *dev;
- int port_id;
- u32 __iomem *pram;
- u32 __iomem *xram;
- u32 __iomem *yram;
- u32 __iomem *reg;
- struct siu_firmware fw;
-};
-
-struct siu_stream {
- struct work_struct work;
- struct snd_pcm_substream *substream;
- snd_pcm_format_t format;
- size_t buf_bytes;
- size_t period_bytes;
- int cur_period; /* Period currently in dma */
- u32 volume;
- snd_pcm_sframes_t xfer_cnt; /* Number of frames */
- u8 rw_flg; /* transfer status */
- /* DMA status */
- struct dma_chan *chan; /* DMA channel */
- struct dma_async_tx_descriptor *tx_desc;
- dma_cookie_t cookie;
- struct sh_dmae_slave param;
-};
-
-struct siu_port {
- unsigned long play_cap; /* Used to track full duplex */
- struct snd_pcm *pcm;
- struct siu_stream playback;
- struct siu_stream capture;
- u32 stfifo; /* STFIFO value from firmware */
- u32 trdat; /* TRDAT value from firmware */
-};
-
-extern struct siu_port *siu_ports[SIU_PORT_NUM];
-
-static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
-{
- struct platform_device *pdev =
- to_platform_device(substream->pcm->card->dev);
- return siu_ports[pdev->id];
-}
-
-/* Register access */
-static inline void siu_write32(u32 __iomem *addr, u32 val)
-{
- __raw_writel(val, addr);
-}
-
-static inline u32 siu_read32(u32 __iomem *addr)
-{
- return __raw_readl(addr);
-}
-
-/* SIU registers */
-#define SIU_IFCTL (0x000 / sizeof(u32))
-#define SIU_SRCTL (0x004 / sizeof(u32))
-#define SIU_SFORM (0x008 / sizeof(u32))
-#define SIU_CKCTL (0x00c / sizeof(u32))
-#define SIU_TRDAT (0x010 / sizeof(u32))
-#define SIU_STFIFO (0x014 / sizeof(u32))
-#define SIU_DPAK (0x01c / sizeof(u32))
-#define SIU_CKREV (0x020 / sizeof(u32))
-#define SIU_EVNTC (0x028 / sizeof(u32))
-#define SIU_SBCTL (0x040 / sizeof(u32))
-#define SIU_SBPSET (0x044 / sizeof(u32))
-#define SIU_SBFSTS (0x068 / sizeof(u32))
-#define SIU_SBDVCA (0x06c / sizeof(u32))
-#define SIU_SBDVCB (0x070 / sizeof(u32))
-#define SIU_SBACTIV (0x074 / sizeof(u32))
-#define SIU_DMAIA (0x090 / sizeof(u32))
-#define SIU_DMAIB (0x094 / sizeof(u32))
-#define SIU_DMAOA (0x098 / sizeof(u32))
-#define SIU_DMAOB (0x09c / sizeof(u32))
-#define SIU_DMAML (0x0a0 / sizeof(u32))
-#define SIU_SPSTS (0x0cc / sizeof(u32))
-#define SIU_SPCTL (0x0d0 / sizeof(u32))
-#define SIU_BRGASEL (0x100 / sizeof(u32))
-#define SIU_BRRA (0x104 / sizeof(u32))
-#define SIU_BRGBSEL (0x108 / sizeof(u32))
-#define SIU_BRRB (0x10c / sizeof(u32))
-
-extern const struct snd_soc_component_driver siu_component;
-extern struct siu_info *siu_i2s_data;
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
-void siu_free_port(struct siu_port *port_info);
-
-#endif
-
-#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
deleted file mode 100644
index f2a386fcd92e4d..00000000000000
--- a/sound/soc/sh/siu_dai.c
+++ /dev/null
@@ -1,799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/siu.h>
-
-#include <sound/control.h>
-#include <sound/soc.h>
-
-#include "siu.h"
-
-/* Board specifics */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SIU_MAX_VOLUME 0x1000
-#else
-# define SIU_MAX_VOLUME 0x7fff
-#endif
-
-#define PRAM_SIZE 0x2000
-#define XRAM_SIZE 0x800
-#define YRAM_SIZE 0x800
-
-#define XRAM_OFFSET 0x4000
-#define YRAM_OFFSET 0x6000
-#define REG_OFFSET 0xc000
-
-#define PLAYBACK_ENABLED 1
-#define CAPTURE_ENABLED 2
-
-#define VOLUME_CAPTURE 0
-#define VOLUME_PLAYBACK 1
-#define DFLT_VOLUME_LEVEL 0x08000800
-
-/*
- * SPDIF is only available on port A and on some SIU implementations it is only
- * available for input. Due to the lack of hardware to test it, SPDIF is left
- * disabled in this driver version
- */
-struct format_flag {
- u32 i2s;
- u32 pcm;
- u32 spdif;
- u32 mask;
-};
-
-struct port_flag {
- struct format_flag playback;
- struct format_flag capture;
-};
-
-struct siu_info *siu_i2s_data;
-
-static struct port_flag siu_flags[SIU_PORT_NUM] = {
- [SIU_PORT_A] = {
- .playback = {
- .i2s = 0x50000000,
- .pcm = 0x40000000,
- .spdif = 0x80000000, /* not on all SIU versions */
- .mask = 0xd0000000,
- },
- .capture = {
- .i2s = 0x05000000,
- .pcm = 0x04000000,
- .spdif = 0x08000000,
- .mask = 0x0d000000,
- },
- },
- [SIU_PORT_B] = {
- .playback = {
- .i2s = 0x00500000,
- .pcm = 0x00400000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00500000,
- },
- .capture = {
- .i2s = 0x00050000,
- .pcm = 0x00040000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00050000,
- },
- },
-};
-
-static void siu_dai_start(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- /* Issue software reset to siu */
- siu_write32(base + SIU_SRCTL, 0);
-
- /* Wait for the reset to take effect */
- udelay(1);
-
- port_info->stfifo = 0;
- port_info->trdat = 0;
-
- /* portA, portB, SIU operate */
- siu_write32(base + SIU_SRCTL, 0x301);
-
- /* portA=256fs, portB=256fs */
- siu_write32(base + SIU_CKCTL, 0x40400000);
-
- /* portA's BRG does not divide SIUCKA */
- siu_write32(base + SIU_BRGASEL, 0);
- siu_write32(base + SIU_BRRA, 0);
-
- /* portB's BRG divides SIUCKB by half */
- siu_write32(base + SIU_BRGBSEL, 1);
- siu_write32(base + SIU_BRRB, 0);
-
- siu_write32(base + SIU_IFCTL, 0x44440000);
-
- /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
- siu_write32(base + SIU_SFORM, 0x0c0c0000);
-
- /*
- * Volume levels: looks like the DSP firmware implements volume controls
- * differently from what's described in the datasheet
- */
- siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
- siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
-}
-
-static void siu_dai_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- /* SIU software reset */
- siu_write32(base + SIU_SRCTL, 0);
-}
-
-static void siu_dai_spbAselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path A use */
- if (!info->port_id)
- idx = 1; /* portA */
- else
- idx = 2; /* portB */
-
- ydef[0] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) |
- (fw->spbpar[idx].dir << 7) | 3;
- ydef[1] = fw->yram0[1]; /* 0x03000300 */
- ydef[2] = (16 / 2) << 24;
- ydef[3] = fw->yram0[3]; /* 0 */
- ydef[4] = fw->yram0[4]; /* 0 */
- ydef[7] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_spbBselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path B use */
- if (!info->port_id)
- idx = 7; /* portA */
- else
- idx = 8; /* portB */
-
- ydef[5] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) | 1;
- ydef[6] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_open(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 srctl, ifctl;
-
- srctl = siu_read32(base + SIU_SRCTL);
- ifctl = siu_read32(base + SIU_IFCTL);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- /* portA operates */
- srctl |= 0x200;
- ifctl &= ~0xc2;
- break;
- case SIU_PORT_B:
- /* portB operates */
- srctl |= 0x100;
- ifctl &= ~0x31;
- break;
- }
-
- siu_write32(base + SIU_SRCTL, srctl);
- /* Unmute and configure portA */
- siu_write32(base + SIU_IFCTL, ifctl);
-}
-
-/*
- * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
- * packing is supported
- */
-static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 dpak;
-
- dpak = siu_read32(base + SIU_DPAK);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- dpak &= ~0xc0000000;
- break;
- case SIU_PORT_B:
- dpak &= ~0x00c00000;
- break;
- }
-
- siu_write32(base + SIU_DPAK, dpak);
-}
-
-static int siu_dai_spbstart(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- int cnt;
- u32 __iomem *add;
- u32 *ptr;
-
- /* Load SPB Program in PRAM */
- ptr = fw->pram0;
- add = info->pram;
- for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- ptr = fw->pram1;
- add = info->pram + (0x0100 / sizeof(u32));
- for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- /* XRAM initialization */
- add = info->xram;
- for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- /* YRAM variable area initialization */
- add = info->yram;
- for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
- siu_write32(add, ydef[cnt]);
-
- /* YRAM FIR coefficient area initialization */
- add = info->yram + (0x0200 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
- siu_write32(add, fw->yram_fir_coeff[cnt]);
-
- /* YRAM IIR coefficient area initialization */
- add = info->yram + (0x0600 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- siu_write32(base + SIU_TRDAT, port_info->trdat);
- port_info->trdat = 0x0;
-
-
- /* SPB start condition: software */
- siu_write32(base + SIU_SBACTIV, 0);
- /* Start SPB */
- siu_write32(base + SIU_SBCTL, 0xc0000000);
- /* Wait for program to halt */
- cnt = 0x10000;
- while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
- cpu_relax();
-
- if (!cnt)
- return -EBUSY;
-
- /* SPB program start address setting */
- siu_write32(base + SIU_SBPSET, 0x00400000);
- /* SPB hardware start(FIFOCTL source) */
- siu_write32(base + SIU_SBACTIV, 0xc0000000);
-
- return 0;
-}
-
-static void siu_dai_spbstop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- siu_write32(base + SIU_SBACTIV, 0);
- /* SPB stop */
- siu_write32(base + SIU_SBCTL, 0);
-
- port_info->stfifo = 0;
-}
-
-/* API functions */
-
-/* Playback and capture hardware properties are identical */
-static const struct snd_pcm_hardware siu_dai_pcm_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
- .period_bytes_min = SIU_PERIOD_BYTES_MIN,
- .period_bytes_max = SIU_PERIOD_BYTES_MAX,
- .periods_min = SIU_PERIODS_MIN,
- .periods_max = SIU_PERIODS_MAX,
-};
-
-static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_info *uinfo)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = SIU_MAX_VOLUME;
-
- return 0;
-}
-
-static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- u32 vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- vol = port_info->playback.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- vol = port_info->capture.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 new_vol;
- u32 cur_vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
- ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
- return -EINVAL;
-
- new_vol = ucontrol->value.integer.value[0] |
- ucontrol->value.integer.value[1] << 16;
-
- /* See comment above - DSP firmware implementation */
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- cur_vol = port_info->playback.volume;
- siu_write32(base + SIU_SBDVCA, new_vol);
- port_info->playback.volume = new_vol;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- cur_vol = port_info->capture.volume;
- siu_write32(base + SIU_SBDVCB, new_vol);
- port_info->capture.volume = new_vol;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- if (cur_vol != new_vol)
- return 1;
-
- return 0;
-}
-
-static const struct snd_kcontrol_new playback_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_PLAYBACK,
-};
-
-static const struct snd_kcontrol_new capture_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Capture Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_CAPTURE,
-};
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
-{
- struct device *dev = card->dev;
- struct snd_kcontrol *kctrl;
- int ret;
-
- *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
- if (!*port_info)
- return -ENOMEM;
-
- dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
-
- (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
- (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
-
- /*
- * Add mixer support. The SPB is used to change the volume. Both
- * ports use the same SPB. Therefore, we only register one
- * control instance since it will be used by both channels.
- * In error case we continue without controls.
- */
- kctrl = snd_ctl_new1(&playback_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add playback controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- kctrl = snd_ctl_new1(&capture_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add capture controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- return 0;
-}
-
-void siu_free_port(struct siu_port *port_info)
-{
- kfree(port_info);
-}
-
-static int siu_dai_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- int ret;
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
-
- ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
- if (unlikely(ret < 0))
- return ret;
-
- siu_dai_start(port_info);
-
- return 0;
-}
-
-static void siu_dai_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- port_info->play_cap &= ~PLAYBACK_ENABLED;
- else
- port_info->play_cap &= ~CAPTURE_ENABLED;
-
- /* Stop the siu if the other stream is not using it */
- if (!port_info->play_cap) {
- /* during stmread or stmwrite ? */
- if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
- return;
- siu_dai_spbstop(port_info);
- siu_dai_stop(port_info);
- }
-}
-
-/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
-static int siu_dai_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- struct siu_stream *siu_stream;
- int self, ret;
-
- dev_dbg(substream->pcm->card->dev,
- "%s: port %d, active streams %lx, %d channels\n",
- __func__, info->port_id, port_info->play_cap, rt->channels);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- self = PLAYBACK_ENABLED;
- siu_stream = &port_info->playback;
- } else {
- self = CAPTURE_ENABLED;
- siu_stream = &port_info->capture;
- }
-
- /* Set up the siu if not already done */
- if (!port_info->play_cap) {
- siu_stream->rw_flg = 0; /* stream-data transfer flag */
-
- siu_dai_spbAselect(port_info);
- siu_dai_spbBselect(port_info);
-
- siu_dai_open(siu_stream);
-
- siu_dai_pcmdatapack(siu_stream);
-
- ret = siu_dai_spbstart(port_info);
- if (ret < 0)
- goto fail;
- } else {
- ret = 0;
- }
-
- port_info->play_cap |= self;
-
-fail:
- return ret;
-}
-
-/*
- * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
- * capture, however, the current API sets the bus format globally for a DAI.
- */
-static int siu_dai_set_fmt(struct snd_soc_dai *dai,
- unsigned int fmt)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- u32 __iomem *base = info->reg;
- u32 ifctl;
-
- dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
- __func__, fmt, info->port_id);
-
- if (info->port_id < 0)
- return -ENODEV;
-
- /* Here select between I2S / PCM / SPDIF */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- ifctl = siu_flags[info->port_id].playback.i2s |
- siu_flags[info->port_id].capture.i2s;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ifctl = siu_flags[info->port_id].playback.pcm |
- siu_flags[info->port_id].capture.pcm;
- break;
- /* SPDIF disabled - see comment at the top */
- default:
- return -EINVAL;
- }
-
- ifctl |= ~(siu_flags[info->port_id].playback.mask |
- siu_flags[info->port_id].capture.mask) &
- siu_read32(base + SIU_IFCTL);
- siu_write32(base + SIU_IFCTL, ifctl);
-
- return 0;
-}
-
-static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct clk *siu_clk, *parent_clk;
- char *siu_name, *parent_name;
- int ret;
-
- if (dir != SND_SOC_CLOCK_IN)
- return -EINVAL;
-
- dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
-
- switch (clk_id) {
- case SIU_CLKA_PLL:
- siu_name = "siua_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKA_EXT:
- siu_name = "siua_clk";
- parent_name = "siumcka_clk";
- break;
- case SIU_CLKB_PLL:
- siu_name = "siub_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKB_EXT:
- siu_name = "siub_clk";
- parent_name = "siumckb_clk";
- break;
- default:
- return -EINVAL;
- }
-
- siu_clk = clk_get(dai->dev, siu_name);
- if (IS_ERR(siu_clk)) {
- dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
- PTR_ERR(siu_clk));
- return PTR_ERR(siu_clk);
- }
-
- parent_clk = clk_get(dai->dev, parent_name);
- if (IS_ERR(parent_clk)) {
- ret = PTR_ERR(parent_clk);
- dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
- goto epclkget;
- }
-
- ret = clk_set_parent(siu_clk, parent_clk);
- if (ret < 0) {
- dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
- goto eclksetp;
- }
-
- ret = clk_set_rate(siu_clk, freq);
- if (ret < 0)
- dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
-
- /* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
-eclksetp:
- clk_put(parent_clk);
-epclkget:
- clk_put(siu_clk);
-
- return ret;
-}
-
-static const struct snd_soc_dai_ops siu_dai_ops = {
- .startup = siu_dai_startup,
- .shutdown = siu_dai_shutdown,
- .prepare = siu_dai_prepare,
- .set_sysclk = siu_dai_set_sysclk,
- .set_fmt = siu_dai_set_fmt,
-};
-
-static struct snd_soc_dai_driver siu_i2s_dai = {
- .name = "siu-i2s-dai",
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .ops = &siu_dai_ops,
-};
-
-static int siu_probe(struct platform_device *pdev)
-{
- const struct firmware *fw_entry;
- struct resource *res, *region;
- struct siu_info *info;
- int ret;
-
- info = devm_kmalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- siu_i2s_data = info;
- info->dev = &pdev->dev;
-
- ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
- if (ret)
- return ret;
-
- /*
- * Loaded firmware is "const" - read only, but we have to modify it in
- * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
- */
- memcpy(&info->fw, fw_entry->data, fw_entry->size);
-
- release_firmware(fw_entry);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- region = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "SIU region already claimed\n");
- return -EBUSY;
- }
-
- info->pram = devm_ioremap(&pdev->dev, res->start, PRAM_SIZE);
- if (!info->pram)
- return -ENOMEM;
- info->xram = devm_ioremap(&pdev->dev, res->start + XRAM_OFFSET,
- XRAM_SIZE);
- if (!info->xram)
- return -ENOMEM;
- info->yram = devm_ioremap(&pdev->dev, res->start + YRAM_OFFSET,
- YRAM_SIZE);
- if (!info->yram)
- return -ENOMEM;
- info->reg = devm_ioremap(&pdev->dev, res->start + REG_OFFSET,
- resource_size(res) - REG_OFFSET);
- if (!info->reg)
- return -ENOMEM;
-
- dev_set_drvdata(&pdev->dev, info);
-
- /* register using ARRAY version so we can keep dai name */
- ret = devm_snd_soc_register_component(&pdev->dev, &siu_component,
- &siu_i2s_dai, 1);
- if (ret < 0)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int siu_remove(struct platform_device *pdev)
-{
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver siu_driver = {
- .driver = {
- .name = "siu-pcm-audio",
- },
- .probe = siu_probe,
- .remove = siu_remove,
-};
-
-module_platform_driver(siu_driver);
-
-MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
-MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
deleted file mode 100644
index f15ff36e793455..00000000000000
--- a/sound/soc/sh/siu_pcm.c
+++ /dev/null
@@ -1,553 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <sound/control.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/siu.h>
-
-#include "siu.h"
-
-#define DRV_NAME "siu-i2s"
-#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
- ((buf_bytes) / (period_bytes))
-#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
- ((buf_addr) + ((period_num) * (period_bytes)))
-
-#define RWF_STM_RD 0x01 /* Read in progress */
-#define RWF_STM_WT 0x02 /* Write in progress */
-
-struct siu_port *siu_ports[SIU_PORT_NUM];
-
-/* transfersize is number of u32 dma transfers per period */
-static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* output FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
- pr_debug("%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x0c180c18);
-
- /* during stmwrite clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static int siu_pcm_stmwrite_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->playback;
-
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- port_info->playback.cur_period = 0;
-
- /* during stmwrite flag set */
- siu_stream->rw_flg = RWF_STM_WT;
-
- /* DMA transfer start */
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static void siu_dma_tx_complete(void *arg)
-{
- struct siu_stream *siu_stream = arg;
-
- if (!siu_stream->rw_flg)
- return;
-
- /* Update completed period count */
- if (++siu_stream->cur_period >=
- GET_MAX_PERIODS(siu_stream->buf_bytes,
- siu_stream->period_bytes))
- siu_stream->cur_period = 0;
-
- pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
- __func__, siu_stream->cur_period,
- siu_stream->cur_period * siu_stream->period_bytes,
- siu_stream->buf_bytes, siu_stream->cookie);
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- /* Notify alsa: a period is done */
- snd_pcm_period_elapsed(siu_stream->substream);
-}
-
-static int siu_pcm_wr_set(struct siu_port *port_info,
- dma_addr_t buff, u32 size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate a dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit a dma transfer\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only output FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
-
- return 0;
-}
-
-static int siu_pcm_rd_set(struct siu_port *port_info,
- dma_addr_t buff, size_t size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit dma descriptor\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only input FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
- (port_info->stfifo & 0x13071307));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x13071307));
-
- return 0;
-}
-
-static void siu_io_work(struct work_struct *work)
-{
- struct siu_stream *siu_stream = container_of(work, struct siu_stream,
- work);
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
-
- if (!siu_stream->rw_flg) {
- dev_dbg(dev, "%s: stream inactive\n", __func__);
- return;
- }
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- dma_addr_t buff;
- size_t count;
-
- buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes);
- count = siu_stream->period_bytes;
-
- /* DMA transfer start */
- siu_pcm_rd_set(port_info, buff, count);
- } else {
- siu_pcm_wr_set(port_info,
- (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes),
- siu_stream->period_bytes);
- }
-}
-
-/* Capture */
-static int siu_pcm_stmread_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->capture;
-
- if (siu_stream->xfer_cnt > 0x1000000)
- return -EINVAL;
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- siu_stream->cur_period = 0;
-
- /* during stmread flag set */
- siu_stream->rw_flg = RWF_STM_RD;
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static int siu_pcm_stmread_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct device *dev = siu_stream->substream->pcm->card->dev;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* input FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x13071307);
-
- /* during stmread flag clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static bool filter(struct dma_chan *chan, void *secondary)
-{
- struct sh_dmae_slave *param = secondary;
-
- pr_debug("%s: secondary ID %d\n", __func__, param->shdma_slave.slave_id);
-
- chan->private = ¶m->shdma_slave;
- return true;
-}
-
-static int siu_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- /* Playback / Capture */
- struct siu_platform *pdata = component->dev->platform_data;
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
- u32 port = info->port_id;
- struct device *dev = ss->pcm->card->dev;
- dma_cap_mask_t mask;
- struct sh_dmae_slave *param;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- siu_stream = &port_info->playback;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_tx_b :
- pdata->dma_slave_tx_a;
- } else {
- siu_stream = &port_info->capture;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_rx_b :
- pdata->dma_slave_rx_a;
- }
-
- /* Get DMA channel */
- siu_stream->chan = dma_request_channel(mask, filter, param);
- if (!siu_stream->chan) {
- dev_err(dev, "DMA channel allocation failed!\n");
- return -EBUSY;
- }
-
- siu_stream->substream = ss;
-
- return 0;
-}
-
-static int siu_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
-
- dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- dma_release_channel(siu_stream->chan);
- siu_stream->chan = NULL;
-
- siu_stream->substream = NULL;
-
- return 0;
-}
-
-static int siu_pcm_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct device *dev = ss->pcm->card->dev;
- struct snd_pcm_runtime *rt;
- struct siu_stream *siu_stream;
- snd_pcm_sframes_t xfer_cnt;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- rt = siu_stream->substream->runtime;
-
- siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
- siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
-
- dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
- info->port_id, rt->channels, siu_stream->period_bytes);
-
- /* We only support buffers that are multiples of the period */
- if (siu_stream->buf_bytes % siu_stream->period_bytes) {
- dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
- __func__, siu_stream->buf_bytes,
- siu_stream->period_bytes);
- return -EINVAL;
- }
-
- xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
- if (!xfer_cnt || xfer_cnt > 0x1000000)
- return -EINVAL;
-
- siu_stream->format = rt->format;
- siu_stream->xfer_cnt = xfer_cnt;
-
- dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
- "format=%d channels=%d xfer_cnt=%d\n", info->port_id,
- (unsigned long)rt->dma_addr, siu_stream->buf_bytes,
- siu_stream->period_bytes,
- siu_stream->format, rt->channels, (int)xfer_cnt);
-
- return 0;
-}
-
-static int siu_pcm_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *ss, int cmd)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- int ret;
-
- dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
- info->port_id, port_info, cmd);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ret = siu_pcm_stmwrite_start(port_info);
- else
- ret = siu_pcm_stmread_start(port_info);
-
- if (ret < 0)
- dev_warn(dev, "%s: start failed on port=%d\n",
- __func__, info->port_id);
-
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_pcm_stmwrite_stop(port_info);
- else
- siu_pcm_stmread_stop(port_info);
- ret = 0;
-
- break;
- default:
- dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * So far only resolution of one period is supported, subject to extending the
- * dmangine API
- */
-static snd_pcm_uframes_t
-siu_pcm_pointer_dma(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct device *dev = ss->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_port *port_info = siu_port_info(ss);
- struct snd_pcm_runtime *rt = ss->runtime;
- size_t ptr;
- struct siu_stream *siu_stream;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- /*
- * ptr is the offset into the buffer where the dma is currently at. We
- * check if the dma buffer has just wrapped.
- */
- ptr = PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes) - rt->dma_addr;
-
- dev_dbg(dev,
- "%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
- __func__, info->port_id, siu_read32(base + SIU_EVNTC),
- siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
- siu_stream->cookie);
-
- if (ptr >= siu_stream->buf_bytes)
- ptr = 0;
-
- return bytes_to_frames(ss->runtime, ptr);
-}
-
-static int siu_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- /* card->dev == socdev->dev, see snd_soc_new_pcms() */
- struct snd_card *card = rtd->card->snd_card;
- struct snd_pcm *pcm = rtd->pcm;
- struct siu_info *info = siu_i2s_data;
- struct platform_device *pdev = to_platform_device(card->dev);
- int ret;
- int i;
-
- /* pdev->id selects between SIUA and SIUB */
- if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
- return -EINVAL;
-
- info->port_id = pdev->id;
-
- /*
- * While the siu has 2 ports, only one port can be on at a time (only 1
- * SPB). So far all the boards using the siu had only one of the ports
- * wired to a codec. To simplify things, we only register one port with
- * alsa. In case both ports are needed, it should be changed here
- */
- for (i = pdev->id; i < pdev->id + 1; i++) {
- struct siu_port **port_info = &siu_ports[i];
-
- ret = siu_init_port(i, port_info, card);
- if (ret < 0)
- return ret;
-
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_DEV, card->dev,
- SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
-
- (*port_info)->pcm = pcm;
-
- /* IO works */
- INIT_WORK(&(*port_info)->playback.work, siu_io_work);
- INIT_WORK(&(*port_info)->capture.work, siu_io_work);
- }
-
- dev_info(card->dev, "SuperH SIU driver initialized.\n");
- return 0;
-}
-
-static void siu_pcm_free(struct snd_soc_component *component,
- struct snd_pcm *pcm)
-{
- struct platform_device *pdev = to_platform_device(pcm->card->dev);
- struct siu_port *port_info = siu_ports[pdev->id];
-
- cancel_work_sync(&port_info->capture.work);
- cancel_work_sync(&port_info->playback.work);
-
- siu_free_port(port_info);
-
- dev_dbg(pcm->card->dev, "%s\n", __func__);
-}
-
-const struct snd_soc_component_driver siu_component = {
- .name = DRV_NAME,
- .open = siu_pcm_open,
- .close = siu_pcm_close,
- .prepare = siu_pcm_prepare,
- .trigger = siu_pcm_trigger,
- .pointer = siu_pcm_pointer_dma,
- .pcm_construct = siu_pcm_new,
- .pcm_destruct = siu_pcm_free,
- .legacy_dai_naming = 1,
-};
-EXPORT_SYMBOL_GPL(siu_component);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
deleted file mode 100644
index 96cf523c227343..00000000000000
--- a/sound/soc/sh/ssi.c
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Serial Sound Interface (I2S) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable SSI output pins!
-
-/*
- * LIMITATIONS:
- * The SSI unit has only one physical data line, so full duplex is
- * impossible. This can be remedied on the SH7760 by using the
- * other SSI unit for recording; however the SH7780 has only 1 SSI
- * unit, and its pins are shared with the AC97 unit, among others.
- *
- * FEATURES:
- * The SSI features "compressed mode": in this mode it continuously
- * streams PCM data over the I2S lines and uses LRCK as a handshake
- * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
- * The number of bits sent over the wire in a frame can be adjusted
- * and can be independent from the actual sample bit depth. This is
- * useful to support TDM mode codecs like the AD1939 which have a
- * fixed TDM slot size, regardless of sample resolution.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define SSICR 0x00
-#define SSISR 0x04
-
-#define CR_DMAEN (1 << 28)
-#define CR_CHNL_SHIFT 22
-#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
-#define CR_DWL_SHIFT 19
-#define CR_DWL_MASK (7 << CR_DWL_SHIFT)
-#define CR_SWL_SHIFT 16
-#define CR_SWL_MASK (7 << CR_SWL_SHIFT)
-#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
-#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
-#define CR_SCKP (1 << 13) /* I2Sclock polarity */
-#define CR_SWSP (1 << 12) /* LRCK polarity */
-#define CR_SPDP (1 << 11)
-#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
-#define CR_PDTA (1 << 9) /* fifo data alignment */
-#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
-#define CR_BREN (1 << 7) /* clock gating in burst mode */
-#define CR_CKDIV_SHIFT 4
-#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
-#define CR_MUTE (1 << 3) /* SSI mute */
-#define CR_CPEN (1 << 2) /* compressed mode */
-#define CR_TRMD (1 << 1) /* transmit/receive select */
-#define CR_EN (1 << 0) /* enable SSI */
-
-#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
-
-struct ssi_priv {
- unsigned long mmio;
- unsigned long sysclk;
- int inuse;
-} ssi_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE680000,
- },
- {
- .mmio = 0xFE690000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE70000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-/*
- * track usage of the SSI; it is simplex-only so prevent attempts of
- * concurrent playback + capture. FIXME: any locking required?
- */
-static int ssi_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- if (ssi->inuse) {
- pr_debug("ssi: already in use!\n");
- return -EBUSY;
- } else
- ssi->inuse = 1;
- return 0;
-}
-
-static void ssi_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- ssi->inuse = 0;
-}
-
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- SSIREG(SSICR) |= CR_DMAEN | CR_EN;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
- unsigned int bits, channels, swl, recv, i;
-
- channels = params_channels(params);
- bits = params->msbits;
- recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
-
- pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
- pr_debug("bits: %u channels: %u\n", bits, channels);
-
- ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
- CR_SWL_MASK);
-
- /* direction (send/receive) */
- if (!recv)
- ssicr |= CR_TRMD; /* transmit */
-
- /* channels */
- if ((channels < 2) || (channels > 8) || (channels & 1)) {
- pr_debug("ssi: invalid number of channels\n");
- return -EINVAL;
- }
- ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
-
- /* DATA WORD LENGTH (DWL): databits in audio sample */
- i = 0;
- switch (bits) {
- case 32: ++i;
- case 24: ++i;
- case 22: ++i;
- case 20: ++i;
- case 18: ++i;
- case 16: ++i;
- ssicr |= i << CR_DWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid sample width\n");
- return -EINVAL;
- }
-
- /*
- * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
- * wires. This is usually bits_per_sample x channels/2; i.e. in
- * Stereo mode the SWL equals DWL. SWL can be bigger than the
- * product of (channels_per_slot x samplebits), e.g. for codecs
- * like the AD1939 which only accept 32bit wide TDM slots. For
- * "standard" I2S operation we set SWL = chans / 2 * DWL here.
- * Waiting for ASoC to get TDM support ;-)
- */
- if ((bits > 16) && (bits <= 24)) {
- bits = 24; /* these are padded by the SSI */
- /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
- }
- i = 0;
- swl = (bits * channels) / 2;
- switch (swl) {
- case 256: ++i;
- case 128: ++i;
- case 64: ++i;
- case 48: ++i;
- case 32: ++i;
- case 16: ++i;
- ssicr |= i << CR_SWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid system word length computed\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
-
- pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
- return 0;
-}
-
-static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
-
- ssi->sysclk = freq;
-
- return 0;
-}
-
-/*
- * This divider is used to generate the SSI_SCK (I2S bitclock) from the
- * clock at the HAC_BIT_CLK ("oversampling clock") pin.
- */
-static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr;
- int i;
-
- i = 0;
- ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
- switch (div) {
- case 16: ++i;
- case 8: ++i;
- case 4: ++i;
- case 2: ++i;
- SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
- case 1: break;
- default:
- pr_debug("ssi: invalid sck divider %d\n", div);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
-
- pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
-
- ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
- CR_SWS_MASTER | CR_SCK_MASTER);
-
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- ssicr |= CR_DEL | CR_PDTA;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ssicr |= CR_DEL;
- break;
- default:
- pr_debug("ssi: unsupported format\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
- case SND_SOC_DAIFMT_CONT:
- break;
- case SND_SOC_DAIFMT_GATED:
- ssicr |= CR_BREN;
- break;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- ssicr |= CR_SCKP; /* sample data at low clkedge */
- break;
- case SND_SOC_DAIFMT_NB_IF:
- ssicr |= CR_SCKP | CR_SWSP;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- ssicr |= CR_SWSP; /* word select starts low */
- break;
- default:
- pr_debug("ssi: invalid inversion\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
- case SND_SOC_DAIFMT_BC_FC:
- break;
- case SND_SOC_DAIFMT_BP_FC:
- ssicr |= CR_SCK_MASTER;
- break;
- case SND_SOC_DAIFMT_BC_FP:
- ssicr |= CR_SWS_MASTER;
- break;
- case SND_SOC_DAIFMT_BP_FP:
- ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
- break;
- default:
- pr_debug("ssi: invalid master/secondary configuration\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
- pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
-
- return 0;
-}
-
-/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
- * Master mode, so really this is board specific; the SSI can do any
- * rate with the right bitclk and divider settings.
- */
-#define SSI_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-/* the SSI can do 8-32 bit samples, with 8 possible channels */
-#define SSI_FMTS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
- SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
- SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
- SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
-
-static const struct snd_soc_dai_ops ssi_dai_ops = {
- .startup = ssi_startup,
- .shutdown = ssi_shutdown,
- .trigger = ssi_trigger,
- .hw_params = ssi_hw_params,
- .set_sysclk = ssi_set_sysclk,
- .set_clkdiv = ssi_set_clkdiv,
- .set_fmt = ssi_set_fmt,
-};
-
-static struct snd_soc_dai_driver sh4_ssi_dai[] = {
-{
- .name = "ssi-dai.0",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "ssi-dai.1",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_ssi_component = {
- .name = "sh4-ssi",
- .legacy_dai_naming = 1,
-};
-
-static int sh4_soc_dai_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
- sh4_ssi_dai,
- ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static struct platform_driver sh4_ssi_driver = {
- .driver = {
- .name = "sh4-ssi-dai",
- },
-
- .probe = sh4_soc_dai_probe,
-};
-
-module_platform_driver(sh4_ssi_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-17 22:52 ` Kuninori Morimoto
-1 siblings, 0 replies; 263+ messages in thread
From: Kuninori Morimoto @ 2023-01-17 22:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
(snip)
> sound/soc/sh/fsi.c | 9 -
(snip)
> config SND_SOC_SH4_FSI
> tristate "SH4 FSI support"
> depends on COMMON_CLK
You can remove sound/soc/sh/fsi.c
It is for SH SoC.
Thank you for your help !!
Best regards
---
Kuninori Morimoto
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
@ 2023-01-17 22:52 ` Kuninori Morimoto
0 siblings, 0 replies; 263+ messages in thread
From: Kuninori Morimoto @ 2023-01-17 22:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
(snip)
> sound/soc/sh/fsi.c | 9 -
(snip)
> config SND_SOC_SH4_FSI
> tristate "SH4 FSI support"
> depends on COMMON_CLK
You can remove sound/soc/sh/fsi.c
It is for SH SoC.
Thank you for your help !!
Best regards
---
Kuninori Morimoto
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
@ 2023-01-17 22:52 ` Kuninori Morimoto
0 siblings, 0 replies; 263+ messages in thread
From: Kuninori Morimoto @ 2023-01-17 22:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Christoph
>
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
(snip)
> sound/soc/sh/fsi.c | 9 -
(snip)
> config SND_SOC_SH4_FSI
> tristate "SH4 FSI support"
> depends on COMMON_CLK
You can remove sound/soc/sh/fsi.c
It is for SH SoC.
Thank you for your help !!
Best regards
---
Kuninori Morimoto
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 06/22] watchdog: remove the shwdt driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
.../watchdog/watchdog-parameters.rst | 12 -
drivers/watchdog/Kconfig | 20 -
drivers/watchdog/Makefile | 3 -
drivers/watchdog/shwdt.c | 344 ------------------
4 files changed, 379 deletions(-)
delete mode 100644 drivers/watchdog/shwdt.c
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
index 29153eed668900..553ac2f8ae23f7 100644
--- a/Documentation/watchdog/watchdog-parameters.rst
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -579,18 +579,6 @@ scx200_wdt:
-------------------------------------------------
-shwdt:
- clock_division_ratio:
- Clock division ratio. Valid ranges are from 0x5 (1.31ms)
- to 0x7 (5.25ms). (default=7)
- heartbeat:
- Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
- nowayout:
- Watchdog cannot be stopped once started
- (default=kernel config parameter)
-
--------------------------------------------------
-
smsc37b787_wdt:
timeout:
range is 1-255 units, default is 60
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0bc40b763b0652..7db0a5e636cf65 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
To compile this driver as a module, choose M here. The module
will be called diag288_wdt.
-# SUPERH (sh + sh64) Architecture
-
-config SH_WDT
- tristate "SuperH Watchdog"
- depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
- select WATCHDOG_CORE
- help
- This driver adds watchdog support for the integrated watchdog in the
- SuperH processors. If you have one of these processors and wish
- to have watchdog support enabled, say Y, otherwise say N.
-
- As a side note, saying Y here will automatically boost HZ to 1000
- so that the timer has a chance to clear the overflow counter. On
- slower systems (such as the SH-2 and SH-3) this will likely yield
- some performance issues. As such, the WDT should be avoided here
- unless it is absolutely necessary.
-
- To compile this driver as a module, choose M here: the
- module will be called shwdt.
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9cbf6580f16c9f..a852ab4d7176ac 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# S390 Architecture
obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
-# SUPERH (sh + sh64) Architecture
-obj-$(CONFIG_SH_WDT) += shwdt.o
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
deleted file mode 100644
index f55533e0e0454e..00000000000000
--- a/drivers/watchdog/shwdt.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * drivers/watchdog/shwdt.c
- *
- * Watchdog driver for integrated watchdog in the SuperH processors.
- *
- * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
- *
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- *
- * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
- * Added expect close support, made emulated timeout runtime changeable
- * general cleanups, add some ioctls
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/watchdog.h>
-#include <linux/pm_runtime.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/watchdog.h>
-
-#define DRV_NAME "sh-wdt"
-
-/*
- * Default clock division ratio is 5.25 msecs. For an additional table of
- * values, consult the asm-sh/watchdog.h. Overload this at module load
- * time.
- *
- * In order for this to work reliably we need to have HZ set to 1000 or
- * something quite higher than 100 (or we need a proper high-res timer
- * implementation that will deal with this properly), otherwise the 10ms
- * resolution of a jiffy is enough to trigger the overflow. For things like
- * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
- * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
- * necssary.
- *
- * As a result of this timing problem, the only modes that are particularly
- * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
- * overflow periods respectively.
- *
- * Also, since we can't really expect userspace to be responsive enough
- * before the overflow happens, we maintain two separate timers .. One in
- * the kernel for clearing out WOVF every 2ms or so (again, this depends on
- * HZ == 1000), and another for monitoring userspace writes to the WDT device.
- *
- * As such, we currently use a configurable heartbeat interval which defaults
- * to 30s. In this case, the userspace daemon is only responsible for periodic
- * writes to the device before the next heartbeat is scheduled. If the daemon
- * misses its deadline, the kernel timer will allow the WDT to overflow.
- */
-static int clock_division_ratio = WTCSR_CKS_4096;
-#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
-
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-static bool nowayout = WATCHDOG_NOWAYOUT;
-static unsigned long next_heartbeat;
-
-struct sh_wdt {
- void __iomem *base;
- struct device *dev;
- struct clk *clk;
- spinlock_t lock;
-
- struct timer_list timer;
-};
-
-static int sh_wdt_start(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- pm_runtime_get_sync(wdt->dev);
- clk_enable(wdt->clk);
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- next_heartbeat = jiffies + (heartbeat * HZ);
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
-
- csr = sh_wdt_read_csr();
- csr |= WTCSR_WT | clock_division_ratio;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- /*
- * These processors have a bit of an inconsistent initialization
- * process.. starting with SH-3, RSTS was moved to WTCSR, and the
- * RSTCSR register was removed.
- *
- * On the SH-2 however, in addition with bits being in different
- * locations, we must deal with RSTCSR outright..
- */
- csr = sh_wdt_read_csr();
- csr |= WTCSR_TME;
- csr &= ~WTCSR_RSTS;
- sh_wdt_write_csr(csr);
-
-#ifdef CONFIG_CPU_SH2
- csr = sh_wdt_read_rstcsr();
- csr &= ~RSTCSR_RSTS;
- sh_wdt_write_rstcsr(csr);
-#endif
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_stop(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- del_timer(&wdt->timer);
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- sh_wdt_write_csr(csr);
-
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- clk_disable(wdt->clk);
- pm_runtime_put_sync(wdt->dev);
-
- return 0;
-}
-
-static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- next_heartbeat = jiffies + (heartbeat * HZ);
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
- return -EINVAL;
-
- spin_lock_irqsave(&wdt->lock, flags);
- heartbeat = t;
- wdt_dev->timeout = t;
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static void sh_wdt_ping(struct timer_list *t)
-{
- struct sh_wdt *wdt = from_timer(wdt, t, timer);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- if (time_before(jiffies, next_heartbeat)) {
- u8 csr;
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_IOVF;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
- } else
- dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
- "the watchdog\n");
- spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static const struct watchdog_info sh_wdt_info = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
- WDIOF_MAGICCLOSE,
- .firmware_version = 1,
- .identity = "SH WDT",
-};
-
-static const struct watchdog_ops sh_wdt_ops = {
- .owner = THIS_MODULE,
- .start = sh_wdt_start,
- .stop = sh_wdt_stop,
- .ping = sh_wdt_keepalive,
- .set_timeout = sh_wdt_set_heartbeat,
-};
-
-static struct watchdog_device sh_wdt_dev = {
- .info = &sh_wdt_info,
- .ops = &sh_wdt_ops,
-};
-
-static int sh_wdt_probe(struct platform_device *pdev)
-{
- struct sh_wdt *wdt;
- int rc;
-
- /*
- * As this driver only covers the global watchdog case, reject
- * any attempts to register per-CPU watchdogs.
- */
- if (pdev->id != -1)
- return -EINVAL;
-
- wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
- if (unlikely(!wdt))
- return -ENOMEM;
-
- wdt->dev = &pdev->dev;
-
- wdt->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(wdt->clk)) {
- /*
- * Clock framework support is optional, continue on
- * anyways if we don't find a matching clock.
- */
- wdt->clk = NULL;
- }
-
- wdt->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(wdt->base))
- return PTR_ERR(wdt->base);
-
- watchdog_set_nowayout(&sh_wdt_dev, nowayout);
- watchdog_set_drvdata(&sh_wdt_dev, wdt);
- sh_wdt_dev.parent = &pdev->dev;
-
- spin_lock_init(&wdt->lock);
-
- rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
- if (unlikely(rc)) {
- /* Default timeout if invalid */
- sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
-
- dev_warn(&pdev->dev,
- "heartbeat value must be 1<=x<=3600, using %d\n",
- sh_wdt_dev.timeout);
- }
-
- dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
- sh_wdt_dev.timeout, nowayout);
-
- rc = watchdog_register_device(&sh_wdt_dev);
- if (unlikely(rc)) {
- dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
- return rc;
- }
-
- timer_setup(&wdt->timer, sh_wdt_ping, 0);
- wdt->timer.expires = next_ping_period(clock_division_ratio);
-
- dev_info(&pdev->dev, "initialized.\n");
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int sh_wdt_remove(struct platform_device *pdev)
-{
- watchdog_unregister_device(&sh_wdt_dev);
-
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static void sh_wdt_shutdown(struct platform_device *pdev)
-{
- sh_wdt_stop(&sh_wdt_dev);
-}
-
-static struct platform_driver sh_wdt_driver = {
- .driver = {
- .name = DRV_NAME,
- },
-
- .probe = sh_wdt_probe,
- .remove = sh_wdt_remove,
- .shutdown = sh_wdt_shutdown,
-};
-
-static int __init sh_wdt_init(void)
-{
- if (unlikely(clock_division_ratio < 0x5 ||
- clock_division_ratio > 0x7)) {
- clock_division_ratio = WTCSR_CKS_4096;
-
- pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
- clock_division_ratio);
- }
-
- return platform_driver_register(&sh_wdt_driver);
-}
-
-static void __exit sh_wdt_exit(void)
-{
- platform_driver_unregister(&sh_wdt_driver);
-}
-module_init(sh_wdt_init);
-module_exit(sh_wdt_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("SuperH watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
-
-module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio,
- "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
- "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
-
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat,
- "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
- __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 06/22] watchdog: remove the shwdt driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
.../watchdog/watchdog-parameters.rst | 12 -
drivers/watchdog/Kconfig | 20 -
drivers/watchdog/Makefile | 3 -
drivers/watchdog/shwdt.c | 344 ------------------
4 files changed, 379 deletions(-)
delete mode 100644 drivers/watchdog/shwdt.c
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
index 29153eed668900..553ac2f8ae23f7 100644
--- a/Documentation/watchdog/watchdog-parameters.rst
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -579,18 +579,6 @@ scx200_wdt:
-------------------------------------------------
-shwdt:
- clock_division_ratio:
- Clock division ratio. Valid ranges are from 0x5 (1.31ms)
- to 0x7 (5.25ms). (default=7)
- heartbeat:
- Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
- nowayout:
- Watchdog cannot be stopped once started
- (default=kernel config parameter)
-
--------------------------------------------------
-
smsc37b787_wdt:
timeout:
range is 1-255 units, default is 60
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0bc40b763b0652..7db0a5e636cf65 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
To compile this driver as a module, choose M here. The module
will be called diag288_wdt.
-# SUPERH (sh + sh64) Architecture
-
-config SH_WDT
- tristate "SuperH Watchdog"
- depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
- select WATCHDOG_CORE
- help
- This driver adds watchdog support for the integrated watchdog in the
- SuperH processors. If you have one of these processors and wish
- to have watchdog support enabled, say Y, otherwise say N.
-
- As a side note, saying Y here will automatically boost HZ to 1000
- so that the timer has a chance to clear the overflow counter. On
- slower systems (such as the SH-2 and SH-3) this will likely yield
- some performance issues. As such, the WDT should be avoided here
- unless it is absolutely necessary.
-
- To compile this driver as a module, choose M here: the
- module will be called shwdt.
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9cbf6580f16c9f..a852ab4d7176ac 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# S390 Architecture
obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
-# SUPERH (sh + sh64) Architecture
-obj-$(CONFIG_SH_WDT) += shwdt.o
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
deleted file mode 100644
index f55533e0e0454e..00000000000000
--- a/drivers/watchdog/shwdt.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * drivers/watchdog/shwdt.c
- *
- * Watchdog driver for integrated watchdog in the SuperH processors.
- *
- * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
- *
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- *
- * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
- * Added expect close support, made emulated timeout runtime changeable
- * general cleanups, add some ioctls
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/watchdog.h>
-#include <linux/pm_runtime.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/watchdog.h>
-
-#define DRV_NAME "sh-wdt"
-
-/*
- * Default clock division ratio is 5.25 msecs. For an additional table of
- * values, consult the asm-sh/watchdog.h. Overload this at module load
- * time.
- *
- * In order for this to work reliably we need to have HZ set to 1000 or
- * something quite higher than 100 (or we need a proper high-res timer
- * implementation that will deal with this properly), otherwise the 10ms
- * resolution of a jiffy is enough to trigger the overflow. For things like
- * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
- * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
- * necssary.
- *
- * As a result of this timing problem, the only modes that are particularly
- * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
- * overflow periods respectively.
- *
- * Also, since we can't really expect userspace to be responsive enough
- * before the overflow happens, we maintain two separate timers .. One in
- * the kernel for clearing out WOVF every 2ms or so (again, this depends on
- * HZ == 1000), and another for monitoring userspace writes to the WDT device.
- *
- * As such, we currently use a configurable heartbeat interval which defaults
- * to 30s. In this case, the userspace daemon is only responsible for periodic
- * writes to the device before the next heartbeat is scheduled. If the daemon
- * misses its deadline, the kernel timer will allow the WDT to overflow.
- */
-static int clock_division_ratio = WTCSR_CKS_4096;
-#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
-
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-static bool nowayout = WATCHDOG_NOWAYOUT;
-static unsigned long next_heartbeat;
-
-struct sh_wdt {
- void __iomem *base;
- struct device *dev;
- struct clk *clk;
- spinlock_t lock;
-
- struct timer_list timer;
-};
-
-static int sh_wdt_start(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- pm_runtime_get_sync(wdt->dev);
- clk_enable(wdt->clk);
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- next_heartbeat = jiffies + (heartbeat * HZ);
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
-
- csr = sh_wdt_read_csr();
- csr |= WTCSR_WT | clock_division_ratio;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- /*
- * These processors have a bit of an inconsistent initialization
- * process.. starting with SH-3, RSTS was moved to WTCSR, and the
- * RSTCSR register was removed.
- *
- * On the SH-2 however, in addition with bits being in different
- * locations, we must deal with RSTCSR outright..
- */
- csr = sh_wdt_read_csr();
- csr |= WTCSR_TME;
- csr &= ~WTCSR_RSTS;
- sh_wdt_write_csr(csr);
-
-#ifdef CONFIG_CPU_SH2
- csr = sh_wdt_read_rstcsr();
- csr &= ~RSTCSR_RSTS;
- sh_wdt_write_rstcsr(csr);
-#endif
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_stop(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- del_timer(&wdt->timer);
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- sh_wdt_write_csr(csr);
-
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- clk_disable(wdt->clk);
- pm_runtime_put_sync(wdt->dev);
-
- return 0;
-}
-
-static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- next_heartbeat = jiffies + (heartbeat * HZ);
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
- return -EINVAL;
-
- spin_lock_irqsave(&wdt->lock, flags);
- heartbeat = t;
- wdt_dev->timeout = t;
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static void sh_wdt_ping(struct timer_list *t)
-{
- struct sh_wdt *wdt = from_timer(wdt, t, timer);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- if (time_before(jiffies, next_heartbeat)) {
- u8 csr;
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_IOVF;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
- } else
- dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
- "the watchdog\n");
- spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static const struct watchdog_info sh_wdt_info = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
- WDIOF_MAGICCLOSE,
- .firmware_version = 1,
- .identity = "SH WDT",
-};
-
-static const struct watchdog_ops sh_wdt_ops = {
- .owner = THIS_MODULE,
- .start = sh_wdt_start,
- .stop = sh_wdt_stop,
- .ping = sh_wdt_keepalive,
- .set_timeout = sh_wdt_set_heartbeat,
-};
-
-static struct watchdog_device sh_wdt_dev = {
- .info = &sh_wdt_info,
- .ops = &sh_wdt_ops,
-};
-
-static int sh_wdt_probe(struct platform_device *pdev)
-{
- struct sh_wdt *wdt;
- int rc;
-
- /*
- * As this driver only covers the global watchdog case, reject
- * any attempts to register per-CPU watchdogs.
- */
- if (pdev->id != -1)
- return -EINVAL;
-
- wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
- if (unlikely(!wdt))
- return -ENOMEM;
-
- wdt->dev = &pdev->dev;
-
- wdt->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(wdt->clk)) {
- /*
- * Clock framework support is optional, continue on
- * anyways if we don't find a matching clock.
- */
- wdt->clk = NULL;
- }
-
- wdt->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(wdt->base))
- return PTR_ERR(wdt->base);
-
- watchdog_set_nowayout(&sh_wdt_dev, nowayout);
- watchdog_set_drvdata(&sh_wdt_dev, wdt);
- sh_wdt_dev.parent = &pdev->dev;
-
- spin_lock_init(&wdt->lock);
-
- rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
- if (unlikely(rc)) {
- /* Default timeout if invalid */
- sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
-
- dev_warn(&pdev->dev,
- "heartbeat value must be 1<=x<=3600, using %d\n",
- sh_wdt_dev.timeout);
- }
-
- dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
- sh_wdt_dev.timeout, nowayout);
-
- rc = watchdog_register_device(&sh_wdt_dev);
- if (unlikely(rc)) {
- dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
- return rc;
- }
-
- timer_setup(&wdt->timer, sh_wdt_ping, 0);
- wdt->timer.expires = next_ping_period(clock_division_ratio);
-
- dev_info(&pdev->dev, "initialized.\n");
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int sh_wdt_remove(struct platform_device *pdev)
-{
- watchdog_unregister_device(&sh_wdt_dev);
-
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static void sh_wdt_shutdown(struct platform_device *pdev)
-{
- sh_wdt_stop(&sh_wdt_dev);
-}
-
-static struct platform_driver sh_wdt_driver = {
- .driver = {
- .name = DRV_NAME,
- },
-
- .probe = sh_wdt_probe,
- .remove = sh_wdt_remove,
- .shutdown = sh_wdt_shutdown,
-};
-
-static int __init sh_wdt_init(void)
-{
- if (unlikely(clock_division_ratio < 0x5 ||
- clock_division_ratio > 0x7)) {
- clock_division_ratio = WTCSR_CKS_4096;
-
- pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
- clock_division_ratio);
- }
-
- return platform_driver_register(&sh_wdt_driver);
-}
-
-static void __exit sh_wdt_exit(void)
-{
- platform_driver_unregister(&sh_wdt_driver);
-}
-module_init(sh_wdt_init);
-module_exit(sh_wdt_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("SuperH watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
-
-module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio,
- "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
- "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
-
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat,
- "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
- __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 06/22] watchdog: remove the shwdt driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
.../watchdog/watchdog-parameters.rst | 12 -
drivers/watchdog/Kconfig | 20 -
drivers/watchdog/Makefile | 3 -
drivers/watchdog/shwdt.c | 344 ------------------
4 files changed, 379 deletions(-)
delete mode 100644 drivers/watchdog/shwdt.c
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
index 29153eed668900..553ac2f8ae23f7 100644
--- a/Documentation/watchdog/watchdog-parameters.rst
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -579,18 +579,6 @@ scx200_wdt:
-------------------------------------------------
-shwdt:
- clock_division_ratio:
- Clock division ratio. Valid ranges are from 0x5 (1.31ms)
- to 0x7 (5.25ms). (default=7)
- heartbeat:
- Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
- nowayout:
- Watchdog cannot be stopped once started
- (default=kernel config parameter)
-
--------------------------------------------------
-
smsc37b787_wdt:
timeout:
range is 1-255 units, default is 60
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0bc40b763b0652..7db0a5e636cf65 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
To compile this driver as a module, choose M here. The module
will be called diag288_wdt.
-# SUPERH (sh + sh64) Architecture
-
-config SH_WDT
- tristate "SuperH Watchdog"
- depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
- select WATCHDOG_CORE
- help
- This driver adds watchdog support for the integrated watchdog in the
- SuperH processors. If you have one of these processors and wish
- to have watchdog support enabled, say Y, otherwise say N.
-
- As a side note, saying Y here will automatically boost HZ to 1000
- so that the timer has a chance to clear the overflow counter. On
- slower systems (such as the SH-2 and SH-3) this will likely yield
- some performance issues. As such, the WDT should be avoided here
- unless it is absolutely necessary.
-
- To compile this driver as a module, choose M here: the
- module will be called shwdt.
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9cbf6580f16c9f..a852ab4d7176ac 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# S390 Architecture
obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
-# SUPERH (sh + sh64) Architecture
-obj-$(CONFIG_SH_WDT) += shwdt.o
-
# SPARC Architecture
# SPARC64 Architecture
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
deleted file mode 100644
index f55533e0e0454e..00000000000000
--- a/drivers/watchdog/shwdt.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * drivers/watchdog/shwdt.c
- *
- * Watchdog driver for integrated watchdog in the SuperH processors.
- *
- * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
- *
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- *
- * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
- * Added expect close support, made emulated timeout runtime changeable
- * general cleanups, add some ioctls
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/watchdog.h>
-#include <linux/pm_runtime.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/watchdog.h>
-
-#define DRV_NAME "sh-wdt"
-
-/*
- * Default clock division ratio is 5.25 msecs. For an additional table of
- * values, consult the asm-sh/watchdog.h. Overload this at module load
- * time.
- *
- * In order for this to work reliably we need to have HZ set to 1000 or
- * something quite higher than 100 (or we need a proper high-res timer
- * implementation that will deal with this properly), otherwise the 10ms
- * resolution of a jiffy is enough to trigger the overflow. For things like
- * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
- * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
- * necssary.
- *
- * As a result of this timing problem, the only modes that are particularly
- * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
- * overflow periods respectively.
- *
- * Also, since we can't really expect userspace to be responsive enough
- * before the overflow happens, we maintain two separate timers .. One in
- * the kernel for clearing out WOVF every 2ms or so (again, this depends on
- * HZ == 1000), and another for monitoring userspace writes to the WDT device.
- *
- * As such, we currently use a configurable heartbeat interval which defaults
- * to 30s. In this case, the userspace daemon is only responsible for periodic
- * writes to the device before the next heartbeat is scheduled. If the daemon
- * misses its deadline, the kernel timer will allow the WDT to overflow.
- */
-static int clock_division_ratio = WTCSR_CKS_4096;
-#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
-
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-static bool nowayout = WATCHDOG_NOWAYOUT;
-static unsigned long next_heartbeat;
-
-struct sh_wdt {
- void __iomem *base;
- struct device *dev;
- struct clk *clk;
- spinlock_t lock;
-
- struct timer_list timer;
-};
-
-static int sh_wdt_start(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- pm_runtime_get_sync(wdt->dev);
- clk_enable(wdt->clk);
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- next_heartbeat = jiffies + (heartbeat * HZ);
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
-
- csr = sh_wdt_read_csr();
- csr |= WTCSR_WT | clock_division_ratio;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- /*
- * These processors have a bit of an inconsistent initialization
- * process.. starting with SH-3, RSTS was moved to WTCSR, and the
- * RSTCSR register was removed.
- *
- * On the SH-2 however, in addition with bits being in different
- * locations, we must deal with RSTCSR outright..
- */
- csr = sh_wdt_read_csr();
- csr |= WTCSR_TME;
- csr &= ~WTCSR_RSTS;
- sh_wdt_write_csr(csr);
-
-#ifdef CONFIG_CPU_SH2
- csr = sh_wdt_read_rstcsr();
- csr &= ~RSTCSR_RSTS;
- sh_wdt_write_rstcsr(csr);
-#endif
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_stop(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
- u8 csr;
-
- spin_lock_irqsave(&wdt->lock, flags);
-
- del_timer(&wdt->timer);
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_TME;
- sh_wdt_write_csr(csr);
-
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- clk_disable(wdt->clk);
- pm_runtime_put_sync(wdt->dev);
-
- return 0;
-}
-
-static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- next_heartbeat = jiffies + (heartbeat * HZ);
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
-{
- struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
- unsigned long flags;
-
- if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
- return -EINVAL;
-
- spin_lock_irqsave(&wdt->lock, flags);
- heartbeat = t;
- wdt_dev->timeout = t;
- spin_unlock_irqrestore(&wdt->lock, flags);
-
- return 0;
-}
-
-static void sh_wdt_ping(struct timer_list *t)
-{
- struct sh_wdt *wdt = from_timer(wdt, t, timer);
- unsigned long flags;
-
- spin_lock_irqsave(&wdt->lock, flags);
- if (time_before(jiffies, next_heartbeat)) {
- u8 csr;
-
- csr = sh_wdt_read_csr();
- csr &= ~WTCSR_IOVF;
- sh_wdt_write_csr(csr);
-
- sh_wdt_write_cnt(0);
-
- mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
- } else
- dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
- "the watchdog\n");
- spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static const struct watchdog_info sh_wdt_info = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
- WDIOF_MAGICCLOSE,
- .firmware_version = 1,
- .identity = "SH WDT",
-};
-
-static const struct watchdog_ops sh_wdt_ops = {
- .owner = THIS_MODULE,
- .start = sh_wdt_start,
- .stop = sh_wdt_stop,
- .ping = sh_wdt_keepalive,
- .set_timeout = sh_wdt_set_heartbeat,
-};
-
-static struct watchdog_device sh_wdt_dev = {
- .info = &sh_wdt_info,
- .ops = &sh_wdt_ops,
-};
-
-static int sh_wdt_probe(struct platform_device *pdev)
-{
- struct sh_wdt *wdt;
- int rc;
-
- /*
- * As this driver only covers the global watchdog case, reject
- * any attempts to register per-CPU watchdogs.
- */
- if (pdev->id != -1)
- return -EINVAL;
-
- wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
- if (unlikely(!wdt))
- return -ENOMEM;
-
- wdt->dev = &pdev->dev;
-
- wdt->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(wdt->clk)) {
- /*
- * Clock framework support is optional, continue on
- * anyways if we don't find a matching clock.
- */
- wdt->clk = NULL;
- }
-
- wdt->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(wdt->base))
- return PTR_ERR(wdt->base);
-
- watchdog_set_nowayout(&sh_wdt_dev, nowayout);
- watchdog_set_drvdata(&sh_wdt_dev, wdt);
- sh_wdt_dev.parent = &pdev->dev;
-
- spin_lock_init(&wdt->lock);
-
- rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
- if (unlikely(rc)) {
- /* Default timeout if invalid */
- sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
-
- dev_warn(&pdev->dev,
- "heartbeat value must be 1<=x<=3600, using %d\n",
- sh_wdt_dev.timeout);
- }
-
- dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
- sh_wdt_dev.timeout, nowayout);
-
- rc = watchdog_register_device(&sh_wdt_dev);
- if (unlikely(rc)) {
- dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
- return rc;
- }
-
- timer_setup(&wdt->timer, sh_wdt_ping, 0);
- wdt->timer.expires = next_ping_period(clock_division_ratio);
-
- dev_info(&pdev->dev, "initialized.\n");
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int sh_wdt_remove(struct platform_device *pdev)
-{
- watchdog_unregister_device(&sh_wdt_dev);
-
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static void sh_wdt_shutdown(struct platform_device *pdev)
-{
- sh_wdt_stop(&sh_wdt_dev);
-}
-
-static struct platform_driver sh_wdt_driver = {
- .driver = {
- .name = DRV_NAME,
- },
-
- .probe = sh_wdt_probe,
- .remove = sh_wdt_remove,
- .shutdown = sh_wdt_shutdown,
-};
-
-static int __init sh_wdt_init(void)
-{
- if (unlikely(clock_division_ratio < 0x5 ||
- clock_division_ratio > 0x7)) {
- clock_division_ratio = WTCSR_CKS_4096;
-
- pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
- clock_division_ratio);
- }
-
- return platform_driver_register(&sh_wdt_driver);
-}
-
-static void __exit sh_wdt_exit(void)
-{
- platform_driver_unregister(&sh_wdt_driver);
-}
-module_init(sh_wdt_init);
-module_exit(sh_wdt_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("SuperH watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
-
-module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio,
- "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
- "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
-
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat,
- "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
- __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 06/22] watchdog: remove the shwdt driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 14:00 ` Guenter Roeck
-1 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-13 14:00 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 1/12/23 22:23, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> .../watchdog/watchdog-parameters.rst | 12 -
> drivers/watchdog/Kconfig | 20 -
> drivers/watchdog/Makefile | 3 -
> drivers/watchdog/shwdt.c | 344 ------------------
> 4 files changed, 379 deletions(-)
> delete mode 100644 drivers/watchdog/shwdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index 29153eed668900..553ac2f8ae23f7 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -579,18 +579,6 @@ scx200_wdt:
>
> -------------------------------------------------
>
> -shwdt:
> - clock_division_ratio:
> - Clock division ratio. Valid ranges are from 0x5 (1.31ms)
> - to 0x7 (5.25ms). (default=7)
> - heartbeat:
> - Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
> - nowayout:
> - Watchdog cannot be stopped once started
> - (default=kernel config parameter)
> -
> --------------------------------------------------
> -
> smsc37b787_wdt:
> timeout:
> range is 1-255 units, default is 60
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0bc40b763b0652..7db0a5e636cf65 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
> To compile this driver as a module, choose M here. The module
> will be called diag288_wdt.
>
> -# SUPERH (sh + sh64) Architecture
> -
> -config SH_WDT
> - tristate "SuperH Watchdog"
> - depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
> - select WATCHDOG_CORE
> - help
> - This driver adds watchdog support for the integrated watchdog in the
> - SuperH processors. If you have one of these processors and wish
> - to have watchdog support enabled, say Y, otherwise say N.
> -
> - As a side note, saying Y here will automatically boost HZ to 1000
> - so that the timer has a chance to clear the overflow counter. On
> - slower systems (such as the SH-2 and SH-3) this will likely yield
> - some performance issues. As such, the WDT should be avoided here
> - unless it is absolutely necessary.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called shwdt.
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9cbf6580f16c9f..a852ab4d7176ac 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
> # S390 Architecture
> obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
>
> -# SUPERH (sh + sh64) Architecture
> -obj-$(CONFIG_SH_WDT) += shwdt.o
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
> deleted file mode 100644
> index f55533e0e0454e..00000000000000
> --- a/drivers/watchdog/shwdt.c
> +++ /dev/null
> @@ -1,344 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * drivers/watchdog/shwdt.c
> - *
> - * Watchdog driver for integrated watchdog in the SuperH processors.
> - *
> - * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
> - *
> - * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
> - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
> - *
> - * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
> - * Added expect close support, made emulated timeout runtime changeable
> - * general cleanups, add some ioctls
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/init.h>
> -#include <linux/types.h>
> -#include <linux/spinlock.h>
> -#include <linux/watchdog.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/fs.h>
> -#include <linux/mm.h>
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -#include <linux/clk.h>
> -#include <linux/err.h>
> -#include <asm/watchdog.h>
> -
> -#define DRV_NAME "sh-wdt"
> -
> -/*
> - * Default clock division ratio is 5.25 msecs. For an additional table of
> - * values, consult the asm-sh/watchdog.h. Overload this at module load
> - * time.
> - *
> - * In order for this to work reliably we need to have HZ set to 1000 or
> - * something quite higher than 100 (or we need a proper high-res timer
> - * implementation that will deal with this properly), otherwise the 10ms
> - * resolution of a jiffy is enough to trigger the overflow. For things like
> - * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
> - * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
> - * necssary.
> - *
> - * As a result of this timing problem, the only modes that are particularly
> - * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
> - * overflow periods respectively.
> - *
> - * Also, since we can't really expect userspace to be responsive enough
> - * before the overflow happens, we maintain two separate timers .. One in
> - * the kernel for clearing out WOVF every 2ms or so (again, this depends on
> - * HZ == 1000), and another for monitoring userspace writes to the WDT device.
> - *
> - * As such, we currently use a configurable heartbeat interval which defaults
> - * to 30s. In this case, the userspace daemon is only responsible for periodic
> - * writes to the device before the next heartbeat is scheduled. If the daemon
> - * misses its deadline, the kernel timer will allow the WDT to overflow.
> - */
> -static int clock_division_ratio = WTCSR_CKS_4096;
> -#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
> -
> -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
> -static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned long next_heartbeat;
> -
> -struct sh_wdt {
> - void __iomem *base;
> - struct device *dev;
> - struct clk *clk;
> - spinlock_t lock;
> -
> - struct timer_list timer;
> -};
> -
> -static int sh_wdt_start(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - pm_runtime_get_sync(wdt->dev);
> - clk_enable(wdt->clk);
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> -
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_WT | clock_division_ratio;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - /*
> - * These processors have a bit of an inconsistent initialization
> - * process.. starting with SH-3, RSTS was moved to WTCSR, and the
> - * RSTCSR register was removed.
> - *
> - * On the SH-2 however, in addition with bits being in different
> - * locations, we must deal with RSTCSR outright..
> - */
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_TME;
> - csr &= ~WTCSR_RSTS;
> - sh_wdt_write_csr(csr);
> -
> -#ifdef CONFIG_CPU_SH2
> - csr = sh_wdt_read_rstcsr();
> - csr &= ~RSTCSR_RSTS;
> - sh_wdt_write_rstcsr(csr);
> -#endif
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_stop(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - del_timer(&wdt->timer);
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_TME;
> - sh_wdt_write_csr(csr);
> -
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - clk_disable(wdt->clk);
> - pm_runtime_put_sync(wdt->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
> - return -EINVAL;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - heartbeat = t;
> - wdt_dev->timeout = t;
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_ping(struct timer_list *t)
> -{
> - struct sh_wdt *wdt = from_timer(wdt, t, timer);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - if (time_before(jiffies, next_heartbeat)) {
> - u8 csr;
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_IOVF;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> - } else
> - dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
> - "the watchdog\n");
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -}
> -
> -static const struct watchdog_info sh_wdt_info = {
> - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
> - WDIOF_MAGICCLOSE,
> - .firmware_version = 1,
> - .identity = "SH WDT",
> -};
> -
> -static const struct watchdog_ops sh_wdt_ops = {
> - .owner = THIS_MODULE,
> - .start = sh_wdt_start,
> - .stop = sh_wdt_stop,
> - .ping = sh_wdt_keepalive,
> - .set_timeout = sh_wdt_set_heartbeat,
> -};
> -
> -static struct watchdog_device sh_wdt_dev = {
> - .info = &sh_wdt_info,
> - .ops = &sh_wdt_ops,
> -};
> -
> -static int sh_wdt_probe(struct platform_device *pdev)
> -{
> - struct sh_wdt *wdt;
> - int rc;
> -
> - /*
> - * As this driver only covers the global watchdog case, reject
> - * any attempts to register per-CPU watchdogs.
> - */
> - if (pdev->id != -1)
> - return -EINVAL;
> -
> - wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
> - if (unlikely(!wdt))
> - return -ENOMEM;
> -
> - wdt->dev = &pdev->dev;
> -
> - wdt->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(wdt->clk)) {
> - /*
> - * Clock framework support is optional, continue on
> - * anyways if we don't find a matching clock.
> - */
> - wdt->clk = NULL;
> - }
> -
> - wdt->base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(wdt->base))
> - return PTR_ERR(wdt->base);
> -
> - watchdog_set_nowayout(&sh_wdt_dev, nowayout);
> - watchdog_set_drvdata(&sh_wdt_dev, wdt);
> - sh_wdt_dev.parent = &pdev->dev;
> -
> - spin_lock_init(&wdt->lock);
> -
> - rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
> - if (unlikely(rc)) {
> - /* Default timeout if invalid */
> - sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
> -
> - dev_warn(&pdev->dev,
> - "heartbeat value must be 1<=x<=3600, using %d\n",
> - sh_wdt_dev.timeout);
> - }
> -
> - dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
> - sh_wdt_dev.timeout, nowayout);
> -
> - rc = watchdog_register_device(&sh_wdt_dev);
> - if (unlikely(rc)) {
> - dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
> - return rc;
> - }
> -
> - timer_setup(&wdt->timer, sh_wdt_ping, 0);
> - wdt->timer.expires = next_ping_period(clock_division_ratio);
> -
> - dev_info(&pdev->dev, "initialized.\n");
> -
> - pm_runtime_enable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_remove(struct platform_device *pdev)
> -{
> - watchdog_unregister_device(&sh_wdt_dev);
> -
> - pm_runtime_disable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_shutdown(struct platform_device *pdev)
> -{
> - sh_wdt_stop(&sh_wdt_dev);
> -}
> -
> -static struct platform_driver sh_wdt_driver = {
> - .driver = {
> - .name = DRV_NAME,
> - },
> -
> - .probe = sh_wdt_probe,
> - .remove = sh_wdt_remove,
> - .shutdown = sh_wdt_shutdown,
> -};
> -
> -static int __init sh_wdt_init(void)
> -{
> - if (unlikely(clock_division_ratio < 0x5 ||
> - clock_division_ratio > 0x7)) {
> - clock_division_ratio = WTCSR_CKS_4096;
> -
> - pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
> - clock_division_ratio);
> - }
> -
> - return platform_driver_register(&sh_wdt_driver);
> -}
> -
> -static void __exit sh_wdt_exit(void)
> -{
> - platform_driver_unregister(&sh_wdt_driver);
> -}
> -module_init(sh_wdt_init);
> -module_exit(sh_wdt_exit);
> -
> -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
> -MODULE_DESCRIPTION("SuperH watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:" DRV_NAME);
> -
> -module_param(clock_division_ratio, int, 0);
> -MODULE_PARM_DESC(clock_division_ratio,
> - "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
> - "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
> -
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat,
> - "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
> - __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
> -
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> - "Watchdog cannot be stopped once started (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 06/22] watchdog: remove the shwdt driver
@ 2023-01-13 14:00 ` Guenter Roeck
0 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-13 14:00 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 1/12/23 22:23, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> .../watchdog/watchdog-parameters.rst | 12 -
> drivers/watchdog/Kconfig | 20 -
> drivers/watchdog/Makefile | 3 -
> drivers/watchdog/shwdt.c | 344 ------------------
> 4 files changed, 379 deletions(-)
> delete mode 100644 drivers/watchdog/shwdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index 29153eed668900..553ac2f8ae23f7 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -579,18 +579,6 @@ scx200_wdt:
>
> -------------------------------------------------
>
> -shwdt:
> - clock_division_ratio:
> - Clock division ratio. Valid ranges are from 0x5 (1.31ms)
> - to 0x7 (5.25ms). (default=7)
> - heartbeat:
> - Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
> - nowayout:
> - Watchdog cannot be stopped once started
> - (default=kernel config parameter)
> -
> --------------------------------------------------
> -
> smsc37b787_wdt:
> timeout:
> range is 1-255 units, default is 60
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0bc40b763b0652..7db0a5e636cf65 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
> To compile this driver as a module, choose M here. The module
> will be called diag288_wdt.
>
> -# SUPERH (sh + sh64) Architecture
> -
> -config SH_WDT
> - tristate "SuperH Watchdog"
> - depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
> - select WATCHDOG_CORE
> - help
> - This driver adds watchdog support for the integrated watchdog in the
> - SuperH processors. If you have one of these processors and wish
> - to have watchdog support enabled, say Y, otherwise say N.
> -
> - As a side note, saying Y here will automatically boost HZ to 1000
> - so that the timer has a chance to clear the overflow counter. On
> - slower systems (such as the SH-2 and SH-3) this will likely yield
> - some performance issues. As such, the WDT should be avoided here
> - unless it is absolutely necessary.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called shwdt.
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9cbf6580f16c9f..a852ab4d7176ac 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
> # S390 Architecture
> obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
>
> -# SUPERH (sh + sh64) Architecture
> -obj-$(CONFIG_SH_WDT) += shwdt.o
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
> deleted file mode 100644
> index f55533e0e0454e..00000000000000
> --- a/drivers/watchdog/shwdt.c
> +++ /dev/null
> @@ -1,344 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * drivers/watchdog/shwdt.c
> - *
> - * Watchdog driver for integrated watchdog in the SuperH processors.
> - *
> - * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
> - *
> - * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
> - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
> - *
> - * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
> - * Added expect close support, made emulated timeout runtime changeable
> - * general cleanups, add some ioctls
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/init.h>
> -#include <linux/types.h>
> -#include <linux/spinlock.h>
> -#include <linux/watchdog.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/fs.h>
> -#include <linux/mm.h>
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -#include <linux/clk.h>
> -#include <linux/err.h>
> -#include <asm/watchdog.h>
> -
> -#define DRV_NAME "sh-wdt"
> -
> -/*
> - * Default clock division ratio is 5.25 msecs. For an additional table of
> - * values, consult the asm-sh/watchdog.h. Overload this at module load
> - * time.
> - *
> - * In order for this to work reliably we need to have HZ set to 1000 or
> - * something quite higher than 100 (or we need a proper high-res timer
> - * implementation that will deal with this properly), otherwise the 10ms
> - * resolution of a jiffy is enough to trigger the overflow. For things like
> - * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
> - * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
> - * necssary.
> - *
> - * As a result of this timing problem, the only modes that are particularly
> - * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
> - * overflow periods respectively.
> - *
> - * Also, since we can't really expect userspace to be responsive enough
> - * before the overflow happens, we maintain two separate timers .. One in
> - * the kernel for clearing out WOVF every 2ms or so (again, this depends on
> - * HZ == 1000), and another for monitoring userspace writes to the WDT device.
> - *
> - * As such, we currently use a configurable heartbeat interval which defaults
> - * to 30s. In this case, the userspace daemon is only responsible for periodic
> - * writes to the device before the next heartbeat is scheduled. If the daemon
> - * misses its deadline, the kernel timer will allow the WDT to overflow.
> - */
> -static int clock_division_ratio = WTCSR_CKS_4096;
> -#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
> -
> -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
> -static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned long next_heartbeat;
> -
> -struct sh_wdt {
> - void __iomem *base;
> - struct device *dev;
> - struct clk *clk;
> - spinlock_t lock;
> -
> - struct timer_list timer;
> -};
> -
> -static int sh_wdt_start(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - pm_runtime_get_sync(wdt->dev);
> - clk_enable(wdt->clk);
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> -
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_WT | clock_division_ratio;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - /*
> - * These processors have a bit of an inconsistent initialization
> - * process.. starting with SH-3, RSTS was moved to WTCSR, and the
> - * RSTCSR register was removed.
> - *
> - * On the SH-2 however, in addition with bits being in different
> - * locations, we must deal with RSTCSR outright..
> - */
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_TME;
> - csr &= ~WTCSR_RSTS;
> - sh_wdt_write_csr(csr);
> -
> -#ifdef CONFIG_CPU_SH2
> - csr = sh_wdt_read_rstcsr();
> - csr &= ~RSTCSR_RSTS;
> - sh_wdt_write_rstcsr(csr);
> -#endif
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_stop(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - del_timer(&wdt->timer);
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_TME;
> - sh_wdt_write_csr(csr);
> -
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - clk_disable(wdt->clk);
> - pm_runtime_put_sync(wdt->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
> - return -EINVAL;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - heartbeat = t;
> - wdt_dev->timeout = t;
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_ping(struct timer_list *t)
> -{
> - struct sh_wdt *wdt = from_timer(wdt, t, timer);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - if (time_before(jiffies, next_heartbeat)) {
> - u8 csr;
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_IOVF;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> - } else
> - dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
> - "the watchdog\n");
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -}
> -
> -static const struct watchdog_info sh_wdt_info = {
> - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
> - WDIOF_MAGICCLOSE,
> - .firmware_version = 1,
> - .identity = "SH WDT",
> -};
> -
> -static const struct watchdog_ops sh_wdt_ops = {
> - .owner = THIS_MODULE,
> - .start = sh_wdt_start,
> - .stop = sh_wdt_stop,
> - .ping = sh_wdt_keepalive,
> - .set_timeout = sh_wdt_set_heartbeat,
> -};
> -
> -static struct watchdog_device sh_wdt_dev = {
> - .info = &sh_wdt_info,
> - .ops = &sh_wdt_ops,
> -};
> -
> -static int sh_wdt_probe(struct platform_device *pdev)
> -{
> - struct sh_wdt *wdt;
> - int rc;
> -
> - /*
> - * As this driver only covers the global watchdog case, reject
> - * any attempts to register per-CPU watchdogs.
> - */
> - if (pdev->id != -1)
> - return -EINVAL;
> -
> - wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
> - if (unlikely(!wdt))
> - return -ENOMEM;
> -
> - wdt->dev = &pdev->dev;
> -
> - wdt->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(wdt->clk)) {
> - /*
> - * Clock framework support is optional, continue on
> - * anyways if we don't find a matching clock.
> - */
> - wdt->clk = NULL;
> - }
> -
> - wdt->base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(wdt->base))
> - return PTR_ERR(wdt->base);
> -
> - watchdog_set_nowayout(&sh_wdt_dev, nowayout);
> - watchdog_set_drvdata(&sh_wdt_dev, wdt);
> - sh_wdt_dev.parent = &pdev->dev;
> -
> - spin_lock_init(&wdt->lock);
> -
> - rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
> - if (unlikely(rc)) {
> - /* Default timeout if invalid */
> - sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
> -
> - dev_warn(&pdev->dev,
> - "heartbeat value must be 1<=x<=3600, using %d\n",
> - sh_wdt_dev.timeout);
> - }
> -
> - dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
> - sh_wdt_dev.timeout, nowayout);
> -
> - rc = watchdog_register_device(&sh_wdt_dev);
> - if (unlikely(rc)) {
> - dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
> - return rc;
> - }
> -
> - timer_setup(&wdt->timer, sh_wdt_ping, 0);
> - wdt->timer.expires = next_ping_period(clock_division_ratio);
> -
> - dev_info(&pdev->dev, "initialized.\n");
> -
> - pm_runtime_enable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_remove(struct platform_device *pdev)
> -{
> - watchdog_unregister_device(&sh_wdt_dev);
> -
> - pm_runtime_disable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_shutdown(struct platform_device *pdev)
> -{
> - sh_wdt_stop(&sh_wdt_dev);
> -}
> -
> -static struct platform_driver sh_wdt_driver = {
> - .driver = {
> - .name = DRV_NAME,
> - },
> -
> - .probe = sh_wdt_probe,
> - .remove = sh_wdt_remove,
> - .shutdown = sh_wdt_shutdown,
> -};
> -
> -static int __init sh_wdt_init(void)
> -{
> - if (unlikely(clock_division_ratio < 0x5 ||
> - clock_division_ratio > 0x7)) {
> - clock_division_ratio = WTCSR_CKS_4096;
> -
> - pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
> - clock_division_ratio);
> - }
> -
> - return platform_driver_register(&sh_wdt_driver);
> -}
> -
> -static void __exit sh_wdt_exit(void)
> -{
> - platform_driver_unregister(&sh_wdt_driver);
> -}
> -module_init(sh_wdt_init);
> -module_exit(sh_wdt_exit);
> -
> -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
> -MODULE_DESCRIPTION("SuperH watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:" DRV_NAME);
> -
> -module_param(clock_division_ratio, int, 0);
> -MODULE_PARM_DESC(clock_division_ratio,
> - "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
> - "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
> -
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat,
> - "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
> - __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
> -
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> - "Watchdog cannot be stopped once started (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 06/22] watchdog: remove the shwdt driver
@ 2023-01-13 14:00 ` Guenter Roeck
0 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-13 14:00 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
On 1/12/23 22:23, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> .../watchdog/watchdog-parameters.rst | 12 -
> drivers/watchdog/Kconfig | 20 -
> drivers/watchdog/Makefile | 3 -
> drivers/watchdog/shwdt.c | 344 ------------------
> 4 files changed, 379 deletions(-)
> delete mode 100644 drivers/watchdog/shwdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index 29153eed668900..553ac2f8ae23f7 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -579,18 +579,6 @@ scx200_wdt:
>
> -------------------------------------------------
>
> -shwdt:
> - clock_division_ratio:
> - Clock division ratio. Valid ranges are from 0x5 (1.31ms)
> - to 0x7 (5.25ms). (default=7)
> - heartbeat:
> - Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
> - nowayout:
> - Watchdog cannot be stopped once started
> - (default=kernel config parameter)
> -
> --------------------------------------------------
> -
> smsc37b787_wdt:
> timeout:
> range is 1-255 units, default is 60
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0bc40b763b0652..7db0a5e636cf65 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG
> To compile this driver as a module, choose M here. The module
> will be called diag288_wdt.
>
> -# SUPERH (sh + sh64) Architecture
> -
> -config SH_WDT
> - tristate "SuperH Watchdog"
> - depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
> - select WATCHDOG_CORE
> - help
> - This driver adds watchdog support for the integrated watchdog in the
> - SuperH processors. If you have one of these processors and wish
> - to have watchdog support enabled, say Y, otherwise say N.
> -
> - As a side note, saying Y here will automatically boost HZ to 1000
> - so that the timer has a chance to clear the overflow counter. On
> - slower systems (such as the SH-2 and SH-3) this will likely yield
> - some performance issues. As such, the WDT should be avoided here
> - unless it is absolutely necessary.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called shwdt.
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9cbf6580f16c9f..a852ab4d7176ac 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
> # S390 Architecture
> obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
>
> -# SUPERH (sh + sh64) Architecture
> -obj-$(CONFIG_SH_WDT) += shwdt.o
> -
> # SPARC Architecture
>
> # SPARC64 Architecture
> diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
> deleted file mode 100644
> index f55533e0e0454e..00000000000000
> --- a/drivers/watchdog/shwdt.c
> +++ /dev/null
> @@ -1,344 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * drivers/watchdog/shwdt.c
> - *
> - * Watchdog driver for integrated watchdog in the SuperH processors.
> - *
> - * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
> - *
> - * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
> - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
> - *
> - * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
> - * Added expect close support, made emulated timeout runtime changeable
> - * general cleanups, add some ioctls
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/init.h>
> -#include <linux/types.h>
> -#include <linux/spinlock.h>
> -#include <linux/watchdog.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/fs.h>
> -#include <linux/mm.h>
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -#include <linux/clk.h>
> -#include <linux/err.h>
> -#include <asm/watchdog.h>
> -
> -#define DRV_NAME "sh-wdt"
> -
> -/*
> - * Default clock division ratio is 5.25 msecs. For an additional table of
> - * values, consult the asm-sh/watchdog.h. Overload this at module load
> - * time.
> - *
> - * In order for this to work reliably we need to have HZ set to 1000 or
> - * something quite higher than 100 (or we need a proper high-res timer
> - * implementation that will deal with this properly), otherwise the 10ms
> - * resolution of a jiffy is enough to trigger the overflow. For things like
> - * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
> - * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
> - * necssary.
> - *
> - * As a result of this timing problem, the only modes that are particularly
> - * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
> - * overflow periods respectively.
> - *
> - * Also, since we can't really expect userspace to be responsive enough
> - * before the overflow happens, we maintain two separate timers .. One in
> - * the kernel for clearing out WOVF every 2ms or so (again, this depends on
> - * HZ == 1000), and another for monitoring userspace writes to the WDT device.
> - *
> - * As such, we currently use a configurable heartbeat interval which defaults
> - * to 30s. In this case, the userspace daemon is only responsible for periodic
> - * writes to the device before the next heartbeat is scheduled. If the daemon
> - * misses its deadline, the kernel timer will allow the WDT to overflow.
> - */
> -static int clock_division_ratio = WTCSR_CKS_4096;
> -#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
> -
> -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
> -static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned long next_heartbeat;
> -
> -struct sh_wdt {
> - void __iomem *base;
> - struct device *dev;
> - struct clk *clk;
> - spinlock_t lock;
> -
> - struct timer_list timer;
> -};
> -
> -static int sh_wdt_start(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - pm_runtime_get_sync(wdt->dev);
> - clk_enable(wdt->clk);
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> -
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_WT | clock_division_ratio;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - /*
> - * These processors have a bit of an inconsistent initialization
> - * process.. starting with SH-3, RSTS was moved to WTCSR, and the
> - * RSTCSR register was removed.
> - *
> - * On the SH-2 however, in addition with bits being in different
> - * locations, we must deal with RSTCSR outright..
> - */
> - csr = sh_wdt_read_csr();
> - csr |= WTCSR_TME;
> - csr &= ~WTCSR_RSTS;
> - sh_wdt_write_csr(csr);
> -
> -#ifdef CONFIG_CPU_SH2
> - csr = sh_wdt_read_rstcsr();
> - csr &= ~RSTCSR_RSTS;
> - sh_wdt_write_rstcsr(csr);
> -#endif
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_stop(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> - u8 csr;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> -
> - del_timer(&wdt->timer);
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_TME;
> - sh_wdt_write_csr(csr);
> -
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - clk_disable(wdt->clk);
> - pm_runtime_put_sync(wdt->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - next_heartbeat = jiffies + (heartbeat * HZ);
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
> -{
> - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> - unsigned long flags;
> -
> - if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
> - return -EINVAL;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - heartbeat = t;
> - wdt_dev->timeout = t;
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_ping(struct timer_list *t)
> -{
> - struct sh_wdt *wdt = from_timer(wdt, t, timer);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&wdt->lock, flags);
> - if (time_before(jiffies, next_heartbeat)) {
> - u8 csr;
> -
> - csr = sh_wdt_read_csr();
> - csr &= ~WTCSR_IOVF;
> - sh_wdt_write_csr(csr);
> -
> - sh_wdt_write_cnt(0);
> -
> - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
> - } else
> - dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
> - "the watchdog\n");
> - spin_unlock_irqrestore(&wdt->lock, flags);
> -}
> -
> -static const struct watchdog_info sh_wdt_info = {
> - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
> - WDIOF_MAGICCLOSE,
> - .firmware_version = 1,
> - .identity = "SH WDT",
> -};
> -
> -static const struct watchdog_ops sh_wdt_ops = {
> - .owner = THIS_MODULE,
> - .start = sh_wdt_start,
> - .stop = sh_wdt_stop,
> - .ping = sh_wdt_keepalive,
> - .set_timeout = sh_wdt_set_heartbeat,
> -};
> -
> -static struct watchdog_device sh_wdt_dev = {
> - .info = &sh_wdt_info,
> - .ops = &sh_wdt_ops,
> -};
> -
> -static int sh_wdt_probe(struct platform_device *pdev)
> -{
> - struct sh_wdt *wdt;
> - int rc;
> -
> - /*
> - * As this driver only covers the global watchdog case, reject
> - * any attempts to register per-CPU watchdogs.
> - */
> - if (pdev->id != -1)
> - return -EINVAL;
> -
> - wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
> - if (unlikely(!wdt))
> - return -ENOMEM;
> -
> - wdt->dev = &pdev->dev;
> -
> - wdt->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(wdt->clk)) {
> - /*
> - * Clock framework support is optional, continue on
> - * anyways if we don't find a matching clock.
> - */
> - wdt->clk = NULL;
> - }
> -
> - wdt->base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(wdt->base))
> - return PTR_ERR(wdt->base);
> -
> - watchdog_set_nowayout(&sh_wdt_dev, nowayout);
> - watchdog_set_drvdata(&sh_wdt_dev, wdt);
> - sh_wdt_dev.parent = &pdev->dev;
> -
> - spin_lock_init(&wdt->lock);
> -
> - rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
> - if (unlikely(rc)) {
> - /* Default timeout if invalid */
> - sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
> -
> - dev_warn(&pdev->dev,
> - "heartbeat value must be 1<=x<=3600, using %d\n",
> - sh_wdt_dev.timeout);
> - }
> -
> - dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
> - sh_wdt_dev.timeout, nowayout);
> -
> - rc = watchdog_register_device(&sh_wdt_dev);
> - if (unlikely(rc)) {
> - dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
> - return rc;
> - }
> -
> - timer_setup(&wdt->timer, sh_wdt_ping, 0);
> - wdt->timer.expires = next_ping_period(clock_division_ratio);
> -
> - dev_info(&pdev->dev, "initialized.\n");
> -
> - pm_runtime_enable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static int sh_wdt_remove(struct platform_device *pdev)
> -{
> - watchdog_unregister_device(&sh_wdt_dev);
> -
> - pm_runtime_disable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -static void sh_wdt_shutdown(struct platform_device *pdev)
> -{
> - sh_wdt_stop(&sh_wdt_dev);
> -}
> -
> -static struct platform_driver sh_wdt_driver = {
> - .driver = {
> - .name = DRV_NAME,
> - },
> -
> - .probe = sh_wdt_probe,
> - .remove = sh_wdt_remove,
> - .shutdown = sh_wdt_shutdown,
> -};
> -
> -static int __init sh_wdt_init(void)
> -{
> - if (unlikely(clock_division_ratio < 0x5 ||
> - clock_division_ratio > 0x7)) {
> - clock_division_ratio = WTCSR_CKS_4096;
> -
> - pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
> - clock_division_ratio);
> - }
> -
> - return platform_driver_register(&sh_wdt_driver);
> -}
> -
> -static void __exit sh_wdt_exit(void)
> -{
> - platform_driver_unregister(&sh_wdt_driver);
> -}
> -module_init(sh_wdt_init);
> -module_exit(sh_wdt_exit);
> -
> -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
> -MODULE_DESCRIPTION("SuperH watchdog driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:" DRV_NAME);
> -
> -module_param(clock_division_ratio, int, 0);
> -MODULE_PARM_DESC(clock_division_ratio,
> - "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
> - "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
> -
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat,
> - "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
> - __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
> -
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout,
> - "Watchdog cannot be stopped once started (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 07/22] cpufreq: remove the sh-cpufreq driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/cpufreq/Kconfig | 14 ---
drivers/cpufreq/Makefile | 1 -
drivers/cpufreq/sh-cpufreq.c | 175 -----------------------------------
3 files changed, 190 deletions(-)
delete mode 100644 drivers/cpufreq/sh-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 2a84fc63371e2e..75a7a486308d8c 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -298,20 +298,6 @@ config SPARC_US2E_CPUFREQ
If in doubt, say N.
endif
-if SUPERH
-config SH_CPU_FREQ
- tristate "SuperH CPU Frequency driver"
- help
- This adds the cpufreq driver for SuperH. Any CPU that supports
- clock rate rounding through the clock framework can use this
- driver. While it will make the kernel slightly larger, this is
- harmless for CPUs that don't support rate rounding. The driver
- will also generate a notice in the boot log before disabling
- itself if the CPU in question is not capable of rate rounding.
-
- If unsure, say N.
-endif
-
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
depends on OF && COMMON_CLK
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 32a7029e25ed81..9c16e77e3e87c0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -112,6 +112,5 @@ obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
-obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
deleted file mode 100644
index b8704232c27b24..00000000000000
--- a/drivers/cpufreq/sh-cpufreq.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * cpufreq driver for the SuperH processors.
- *
- * Copyright (C) 2002 - 2012 Paul Mundt
- * Copyright (C) 2002 M. R. Brown
- *
- * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
- *
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "cpufreq: " fmt
-
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/cpumask.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/clk.h>
-#include <linux/percpu.h>
-#include <linux/sh_clk.h>
-
-static DEFINE_PER_CPU(struct clk, sh_cpuclk);
-
-struct cpufreq_target {
- struct cpufreq_policy *policy;
- unsigned int freq;
-};
-
-static unsigned int sh_cpufreq_get(unsigned int cpu)
-{
- return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
-}
-
-static long __sh_cpufreq_target(void *arg)
-{
- struct cpufreq_target *target = arg;
- struct cpufreq_policy *policy = target->policy;
- int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_freqs freqs;
- struct device *dev;
- long freq;
-
- if (smp_processor_id() != cpu)
- return -ENODEV;
-
- dev = get_cpu_device(cpu);
-
- /* Convert target_freq from kHz to Hz */
- freq = clk_round_rate(cpuclk, target->freq * 1000);
-
- if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
- return -EINVAL;
-
- dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
-
- freqs.old = sh_cpufreq_get(cpu);
- freqs.new = (freq + 500) / 1000;
- freqs.flags = 0;
-
- cpufreq_freq_transition_begin(target->policy, &freqs);
- clk_set_rate(cpuclk, freq);
- cpufreq_freq_transition_end(target->policy, &freqs, 0);
-
- dev_dbg(dev, "set frequency %lu Hz\n", freq);
- return 0;
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_target data = { .policy = policy, .freq = target_freq };
-
- return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
-}
-
-static int sh_cpufreq_verify(struct cpufreq_policy_data *policy)
-{
- struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
- struct cpufreq_frequency_table *freq_table;
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table)
- return cpufreq_frequency_table_verify(policy, freq_table);
-
- cpufreq_verify_within_cpu_limits(policy);
-
- policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-
- cpufreq_verify_within_cpu_limits(policy);
- return 0;
-}
-
-static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_frequency_table *freq_table;
- struct device *dev;
-
- dev = get_cpu_device(cpu);
-
- cpuclk = clk_get(dev, "cpu_clk");
- if (IS_ERR(cpuclk)) {
- dev_err(dev, "couldn't get CPU clk\n");
- return PTR_ERR(cpuclk);
- }
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table) {
- policy->freq_table = freq_table;
- } else {
- dev_notice(dev, "no frequency table found, falling back "
- "to rate rounding.\n");
-
- policy->min = policy->cpuinfo.min_freq =
- (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = policy->cpuinfo.max_freq =
- (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
- }
-
- return 0;
-}
-
-static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-
- clk_put(cpuclk);
-
- return 0;
-}
-
-static struct cpufreq_driver sh_cpufreq_driver = {
- .name = "sh",
- .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .get = sh_cpufreq_get,
- .target = sh_cpufreq_target,
- .verify = sh_cpufreq_verify,
- .init = sh_cpufreq_cpu_init,
- .exit = sh_cpufreq_cpu_exit,
- .attr = cpufreq_generic_attr,
-};
-
-static int __init sh_cpufreq_module_init(void)
-{
- pr_notice("SuperH CPU frequency driver.\n");
- return cpufreq_register_driver(&sh_cpufreq_driver);
-}
-
-static void __exit sh_cpufreq_module_exit(void)
-{
- cpufreq_unregister_driver(&sh_cpufreq_driver);
-}
-
-module_init(sh_cpufreq_module_init);
-module_exit(sh_cpufreq_module_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("cpufreq driver for SuperH");
-MODULE_LICENSE("GPL");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 07/22] cpufreq: remove the sh-cpufreq driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/cpufreq/Kconfig | 14 ---
drivers/cpufreq/Makefile | 1 -
drivers/cpufreq/sh-cpufreq.c | 175 -----------------------------------
3 files changed, 190 deletions(-)
delete mode 100644 drivers/cpufreq/sh-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 2a84fc63371e2e..75a7a486308d8c 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -298,20 +298,6 @@ config SPARC_US2E_CPUFREQ
If in doubt, say N.
endif
-if SUPERH
-config SH_CPU_FREQ
- tristate "SuperH CPU Frequency driver"
- help
- This adds the cpufreq driver for SuperH. Any CPU that supports
- clock rate rounding through the clock framework can use this
- driver. While it will make the kernel slightly larger, this is
- harmless for CPUs that don't support rate rounding. The driver
- will also generate a notice in the boot log before disabling
- itself if the CPU in question is not capable of rate rounding.
-
- If unsure, say N.
-endif
-
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
depends on OF && COMMON_CLK
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 32a7029e25ed81..9c16e77e3e87c0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -112,6 +112,5 @@ obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
-obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
deleted file mode 100644
index b8704232c27b24..00000000000000
--- a/drivers/cpufreq/sh-cpufreq.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * cpufreq driver for the SuperH processors.
- *
- * Copyright (C) 2002 - 2012 Paul Mundt
- * Copyright (C) 2002 M. R. Brown
- *
- * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
- *
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "cpufreq: " fmt
-
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/cpumask.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/clk.h>
-#include <linux/percpu.h>
-#include <linux/sh_clk.h>
-
-static DEFINE_PER_CPU(struct clk, sh_cpuclk);
-
-struct cpufreq_target {
- struct cpufreq_policy *policy;
- unsigned int freq;
-};
-
-static unsigned int sh_cpufreq_get(unsigned int cpu)
-{
- return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
-}
-
-static long __sh_cpufreq_target(void *arg)
-{
- struct cpufreq_target *target = arg;
- struct cpufreq_policy *policy = target->policy;
- int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_freqs freqs;
- struct device *dev;
- long freq;
-
- if (smp_processor_id() != cpu)
- return -ENODEV;
-
- dev = get_cpu_device(cpu);
-
- /* Convert target_freq from kHz to Hz */
- freq = clk_round_rate(cpuclk, target->freq * 1000);
-
- if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
- return -EINVAL;
-
- dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
-
- freqs.old = sh_cpufreq_get(cpu);
- freqs.new = (freq + 500) / 1000;
- freqs.flags = 0;
-
- cpufreq_freq_transition_begin(target->policy, &freqs);
- clk_set_rate(cpuclk, freq);
- cpufreq_freq_transition_end(target->policy, &freqs, 0);
-
- dev_dbg(dev, "set frequency %lu Hz\n", freq);
- return 0;
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_target data = { .policy = policy, .freq = target_freq };
-
- return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
-}
-
-static int sh_cpufreq_verify(struct cpufreq_policy_data *policy)
-{
- struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
- struct cpufreq_frequency_table *freq_table;
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table)
- return cpufreq_frequency_table_verify(policy, freq_table);
-
- cpufreq_verify_within_cpu_limits(policy);
-
- policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-
- cpufreq_verify_within_cpu_limits(policy);
- return 0;
-}
-
-static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_frequency_table *freq_table;
- struct device *dev;
-
- dev = get_cpu_device(cpu);
-
- cpuclk = clk_get(dev, "cpu_clk");
- if (IS_ERR(cpuclk)) {
- dev_err(dev, "couldn't get CPU clk\n");
- return PTR_ERR(cpuclk);
- }
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table) {
- policy->freq_table = freq_table;
- } else {
- dev_notice(dev, "no frequency table found, falling back "
- "to rate rounding.\n");
-
- policy->min = policy->cpuinfo.min_freq =
- (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = policy->cpuinfo.max_freq =
- (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
- }
-
- return 0;
-}
-
-static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-
- clk_put(cpuclk);
-
- return 0;
-}
-
-static struct cpufreq_driver sh_cpufreq_driver = {
- .name = "sh",
- .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .get = sh_cpufreq_get,
- .target = sh_cpufreq_target,
- .verify = sh_cpufreq_verify,
- .init = sh_cpufreq_cpu_init,
- .exit = sh_cpufreq_cpu_exit,
- .attr = cpufreq_generic_attr,
-};
-
-static int __init sh_cpufreq_module_init(void)
-{
- pr_notice("SuperH CPU frequency driver.\n");
- return cpufreq_register_driver(&sh_cpufreq_driver);
-}
-
-static void __exit sh_cpufreq_module_exit(void)
-{
- cpufreq_unregister_driver(&sh_cpufreq_driver);
-}
-
-module_init(sh_cpufreq_module_init);
-module_exit(sh_cpufreq_module_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("cpufreq driver for SuperH");
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 07/22] cpufreq: remove the sh-cpufreq driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/cpufreq/Kconfig | 14 ---
drivers/cpufreq/Makefile | 1 -
drivers/cpufreq/sh-cpufreq.c | 175 -----------------------------------
3 files changed, 190 deletions(-)
delete mode 100644 drivers/cpufreq/sh-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 2a84fc63371e2e..75a7a486308d8c 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -298,20 +298,6 @@ config SPARC_US2E_CPUFREQ
If in doubt, say N.
endif
-if SUPERH
-config SH_CPU_FREQ
- tristate "SuperH CPU Frequency driver"
- help
- This adds the cpufreq driver for SuperH. Any CPU that supports
- clock rate rounding through the clock framework can use this
- driver. While it will make the kernel slightly larger, this is
- harmless for CPUs that don't support rate rounding. The driver
- will also generate a notice in the boot log before disabling
- itself if the CPU in question is not capable of rate rounding.
-
- If unsure, say N.
-endif
-
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
depends on OF && COMMON_CLK
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 32a7029e25ed81..9c16e77e3e87c0 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -112,6 +112,5 @@ obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
-obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
deleted file mode 100644
index b8704232c27b24..00000000000000
--- a/drivers/cpufreq/sh-cpufreq.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * cpufreq driver for the SuperH processors.
- *
- * Copyright (C) 2002 - 2012 Paul Mundt
- * Copyright (C) 2002 M. R. Brown
- *
- * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c
- *
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "cpufreq: " fmt
-
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/cpumask.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/clk.h>
-#include <linux/percpu.h>
-#include <linux/sh_clk.h>
-
-static DEFINE_PER_CPU(struct clk, sh_cpuclk);
-
-struct cpufreq_target {
- struct cpufreq_policy *policy;
- unsigned int freq;
-};
-
-static unsigned int sh_cpufreq_get(unsigned int cpu)
-{
- return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
-}
-
-static long __sh_cpufreq_target(void *arg)
-{
- struct cpufreq_target *target = arg;
- struct cpufreq_policy *policy = target->policy;
- int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_freqs freqs;
- struct device *dev;
- long freq;
-
- if (smp_processor_id() != cpu)
- return -ENODEV;
-
- dev = get_cpu_device(cpu);
-
- /* Convert target_freq from kHz to Hz */
- freq = clk_round_rate(cpuclk, target->freq * 1000);
-
- if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
- return -EINVAL;
-
- dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
-
- freqs.old = sh_cpufreq_get(cpu);
- freqs.new = (freq + 500) / 1000;
- freqs.flags = 0;
-
- cpufreq_freq_transition_begin(target->policy, &freqs);
- clk_set_rate(cpuclk, freq);
- cpufreq_freq_transition_end(target->policy, &freqs, 0);
-
- dev_dbg(dev, "set frequency %lu Hz\n", freq);
- return 0;
-}
-
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_target data = { .policy = policy, .freq = target_freq };
-
- return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
-}
-
-static int sh_cpufreq_verify(struct cpufreq_policy_data *policy)
-{
- struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
- struct cpufreq_frequency_table *freq_table;
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table)
- return cpufreq_frequency_table_verify(policy, freq_table);
-
- cpufreq_verify_within_cpu_limits(policy);
-
- policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
-
- cpufreq_verify_within_cpu_limits(policy);
- return 0;
-}
-
-static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
- struct cpufreq_frequency_table *freq_table;
- struct device *dev;
-
- dev = get_cpu_device(cpu);
-
- cpuclk = clk_get(dev, "cpu_clk");
- if (IS_ERR(cpuclk)) {
- dev_err(dev, "couldn't get CPU clk\n");
- return PTR_ERR(cpuclk);
- }
-
- freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
- if (freq_table) {
- policy->freq_table = freq_table;
- } else {
- dev_notice(dev, "no frequency table found, falling back "
- "to rate rounding.\n");
-
- policy->min = policy->cpuinfo.min_freq =
- (clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->max = policy->cpuinfo.max_freq =
- (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
- }
-
- return 0;
-}
-
-static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
- unsigned int cpu = policy->cpu;
- struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-
- clk_put(cpuclk);
-
- return 0;
-}
-
-static struct cpufreq_driver sh_cpufreq_driver = {
- .name = "sh",
- .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .get = sh_cpufreq_get,
- .target = sh_cpufreq_target,
- .verify = sh_cpufreq_verify,
- .init = sh_cpufreq_cpu_init,
- .exit = sh_cpufreq_cpu_exit,
- .attr = cpufreq_generic_attr,
-};
-
-static int __init sh_cpufreq_module_init(void)
-{
- pr_notice("SuperH CPU frequency driver.\n");
- return cpufreq_register_driver(&sh_cpufreq_driver);
-}
-
-static void __exit sh_cpufreq_module_exit(void)
-{
- cpufreq_unregister_driver(&sh_cpufreq_driver);
-}
-
-module_init(sh_cpufreq_module_init);
-module_exit(sh_cpufreq_module_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("cpufreq driver for SuperH");
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 08/22] dmaengine: remove the shdmac driver
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/dma/sh/Kconfig | 20 -
drivers/dma/sh/Makefile | 13 -
drivers/dma/sh/shdma-base.c | 1052 -----------------------------------
drivers/dma/sh/shdma.h | 61 --
drivers/dma/sh/shdmac.c | 938 -------------------------------
include/linux/shdma-base.h | 4 -
6 files changed, 2088 deletions(-)
delete mode 100644 drivers/dma/sh/shdma-base.c
delete mode 100644 drivers/dma/sh/shdma.h
delete mode 100644 drivers/dma/sh/shdmac.c
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index c0b2997ab7fd93..744d4d8ff5353b 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -7,30 +7,10 @@ config RENESAS_DMA
bool
select DMA_ENGINE
-#
-# DMA Engine Helpers
-#
-
-config SH_DMAE_BASE
- bool "Renesas SuperH DMA Engine support"
- depends on SUPERH || COMPILE_TEST
- depends on !SUPERH || SH_DMA
- depends on !SH_DMA_API
- default y
- select RENESAS_DMA
- help
- Enable support for the Renesas SuperH DMA controllers.
-
#
# DMA Controllers
#
-config SH_DMAE
- tristate "Renesas SuperH DMAC support"
- depends on SH_DMAE_BASE
- help
- Enable support for the Renesas SuperH DMA controllers.
-
config RCAR_DMAC
tristate "Renesas R-Car Gen{2,3} and RZ/G{1,2} DMA Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index 360ab6d25e769d..07178651aa7279 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -1,17 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-#
-# DMA Engine Helpers
-#
-
-obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o
-
-#
-# DMA Controllers
-#
-
-shdma-y := shdmac.o
-shdma-objs := $(shdma-y)
-obj-$(CONFIG_SH_DMAE) += shdma.o
obj-$(CONFIG_RCAR_DMAC) += rcar-dmac.o
obj-$(CONFIG_RENESAS_USB_DMAC) += usb-dmac.o
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
deleted file mode 100644
index 158e5e7defaeb0..00000000000000
--- a/drivers/dma/sh/shdma-base.c
+++ /dev/null
@@ -1,1052 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dmaengine driver base library for DMA controllers, found on SH-based SoCs
- *
- * extracted from shdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-
-/* DMA descriptor control */
-enum shdma_desc_status {
- DESC_IDLE,
- DESC_PREPARED,
- DESC_SUBMITTED,
- DESC_COMPLETED, /* completed, have to call callback */
- DESC_WAITING, /* callback called, waiting for ack / re-submit */
-};
-
-#define NR_DESCS_PER_CHANNEL 32
-
-#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan)
-#define to_shdma_dev(d) container_of(d, struct shdma_dev, dma_dev)
-
-/*
- * For slave DMA we assume, that there is a finite number of DMA slaves in the
- * system, and that each such slave can only use a finite number of channels.
- * We use slave channel IDs to make sure, that no such slave channel ID is
- * allocated more than once.
- */
-static unsigned int slave_num = 256;
-module_param(slave_num, uint, 0444);
-
-/* A bitmask with slave_num bits */
-static unsigned long *shdma_slave_used;
-
-/* Called under spin_lock_irq(&schan->chan_lock") */
-static void shdma_chan_xfer_ld_queue(struct shdma_chan *schan)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *sdesc;
-
- /* DMA work check */
- if (ops->channel_busy(schan))
- return;
-
- /* Find the first not transferred descriptor */
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->mark == DESC_SUBMITTED) {
- ops->start_xfer(schan, sdesc);
- break;
- }
-}
-
-static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct shdma_desc *chunk, *c, *desc =
- container_of(tx, struct shdma_desc, async_tx);
- struct shdma_chan *schan = to_shdma_chan(tx->chan);
- dma_async_tx_callback callback = tx->callback;
- dma_cookie_t cookie;
- bool power_up;
-
- spin_lock_irq(&schan->chan_lock);
-
- power_up = list_empty(&schan->ld_queue);
-
- cookie = dma_cookie_assign(tx);
-
- /* Mark all chunks of this descriptor as submitted, move to the queue */
- list_for_each_entry_safe(chunk, c, desc->node.prev, node) {
- /*
- * All chunks are on the global ld_free, so, we have to find
- * the end of the chain ourselves
- */
- if (chunk != desc && (chunk->mark == DESC_IDLE ||
- chunk->async_tx.cookie > 0 ||
- chunk->async_tx.cookie == -EBUSY ||
- &chunk->node == &schan->ld_free))
- break;
- chunk->mark = DESC_SUBMITTED;
- if (chunk->chunks == 1) {
- chunk->async_tx.callback = callback;
- chunk->async_tx.callback_param = tx->callback_param;
- } else {
- /* Callback goes to the last chunk */
- chunk->async_tx.callback = NULL;
- }
- chunk->cookie = cookie;
- list_move_tail(&chunk->node, &schan->ld_queue);
-
- dev_dbg(schan->dev, "submit #%d@%p on %d\n",
- tx->cookie, &chunk->async_tx, schan->id);
- }
-
- if (power_up) {
- int ret;
- schan->pm_state = SHDMA_PM_BUSY;
-
- ret = pm_runtime_get(schan->dev);
-
- spin_unlock_irq(&schan->chan_lock);
- if (ret < 0)
- dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
-
- pm_runtime_barrier(schan->dev);
-
- spin_lock_irq(&schan->chan_lock);
-
- /* Have we been reset, while waiting? */
- if (schan->pm_state != SHDMA_PM_ESTABLISHED) {
- struct shdma_dev *sdev =
- to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- dev_dbg(schan->dev, "Bring up channel %d\n",
- schan->id);
- /*
- * TODO: .xfer_setup() might fail on some platforms.
- * Make it int then, on error remove chunks from the
- * queue again
- */
- ops->setup_xfer(schan, schan->slave_id);
-
- if (schan->pm_state == SHDMA_PM_PENDING)
- shdma_chan_xfer_ld_queue(schan);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- }
- } else {
- /*
- * Tell .device_issue_pending() not to run the queue, interrupts
- * will do it anyway
- */
- schan->pm_state = SHDMA_PM_PENDING;
- }
-
- spin_unlock_irq(&schan->chan_lock);
-
- return cookie;
-}
-
-/* Called with desc_lock held */
-static struct shdma_desc *shdma_get_desc(struct shdma_chan *schan)
-{
- struct shdma_desc *sdesc;
-
- list_for_each_entry(sdesc, &schan->ld_free, node)
- if (sdesc->mark != DESC_PREPARED) {
- BUG_ON(sdesc->mark != DESC_IDLE);
- list_del(&sdesc->node);
- return sdesc;
- }
-
- return NULL;
-}
-
-static int shdma_setup_slave(struct shdma_chan *schan, dma_addr_t slave_addr)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int ret, match;
-
- if (schan->dev->of_node) {
- match = schan->hw_req;
- ret = ops->set_slave(schan, match, slave_addr, true);
- if (ret < 0)
- return ret;
- } else {
- match = schan->real_slave_id;
- }
-
- if (schan->real_slave_id < 0 || schan->real_slave_id >= slave_num)
- return -EINVAL;
-
- if (test_and_set_bit(schan->real_slave_id, shdma_slave_used))
- return -EBUSY;
-
- ret = ops->set_slave(schan, match, slave_addr, false);
- if (ret < 0) {
- clear_bit(schan->real_slave_id, shdma_slave_used);
- return ret;
- }
-
- schan->slave_id = schan->real_slave_id;
-
- return 0;
-}
-
-static int shdma_alloc_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *desc;
- struct shdma_slave *slave = chan->private;
- int ret, i;
-
- /*
- * This relies on the guarantee from dmaengine that alloc_chan_resources
- * never runs concurrently with itself or free_chan_resources.
- */
- if (slave) {
- /* Legacy mode: .private is set in filter */
- schan->real_slave_id = slave->slave_id;
- ret = shdma_setup_slave(schan, 0);
- if (ret < 0)
- goto esetslave;
- } else {
- /* Normal mode: real_slave_id was set by filter */
- schan->slave_id = -EINVAL;
- }
-
- schan->desc = kcalloc(NR_DESCS_PER_CHANNEL,
- sdev->desc_size, GFP_KERNEL);
- if (!schan->desc) {
- ret = -ENOMEM;
- goto edescalloc;
- }
- schan->desc_num = NR_DESCS_PER_CHANNEL;
-
- for (i = 0; i < NR_DESCS_PER_CHANNEL; i++) {
- desc = ops->embedded_desc(schan->desc, i);
- dma_async_tx_descriptor_init(&desc->async_tx,
- &schan->dma_chan);
- desc->async_tx.tx_submit = shdma_tx_submit;
- desc->mark = DESC_IDLE;
-
- list_add(&desc->node, &schan->ld_free);
- }
-
- return NR_DESCS_PER_CHANNEL;
-
-edescalloc:
- if (slave)
-esetslave:
- clear_bit(slave->slave_id, shdma_slave_used);
- chan->private = NULL;
- return ret;
-}
-
-/*
- * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer.
- * You always have to pass a valid slave id as the argument, old drivers that
- * pass ERR_PTR(-EINVAL) as a filter parameter and set it up in dma_slave_config
- * need to be updated so we can remove the slave_id field from dma_slave_config.
- * parameter. If this filter is used, the slave driver, after calling
- * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .direction, and either .src_addr or .dst_addr set.
- *
- * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
- * capability! If this becomes a requirement, hardware glue drivers, using this
- * services would have to provide their own filters, which first would check
- * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
- * this, and only then, in case of a match, call this common filter.
- * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
- * In that case the MID-RID value is used for slave channel filtering and is
- * passed to this function in the "arg" parameter.
- */
-bool shdma_chan_filter(struct dma_chan *chan, void *arg)
-{
- struct shdma_chan *schan;
- struct shdma_dev *sdev;
- int slave_id = (long)arg;
- int ret;
-
- /* Only support channels handled by this driver. */
- if (chan->device->device_alloc_chan_resources !=
- shdma_alloc_chan_resources)
- return false;
-
- schan = to_shdma_chan(chan);
- sdev = to_shdma_dev(chan->device);
-
- /*
- * For DT, the schan->slave_id field is generated by the
- * set_slave function from the slave ID that is passed in
- * from xlate. For the non-DT case, the slave ID is
- * directly passed into the filter function by the driver
- */
- if (schan->dev->of_node) {
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = schan->slave_id;
- return true;
- }
-
- if (slave_id < 0) {
- /* No slave requested - arbitrary channel */
- dev_warn(sdev->dma_dev.dev, "invalid slave ID passed to dma_request_slave\n");
- return true;
- }
-
- if (slave_id >= slave_num)
- return false;
-
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = slave_id;
-
- return true;
-}
-EXPORT_SYMBOL(shdma_chan_filter);
-
-static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
-{
- struct shdma_desc *desc, *_desc;
- /* Is the "exposed" head of a chain acked? */
- bool head_acked = false;
- dma_cookie_t cookie = 0;
- dma_async_tx_callback callback = NULL;
- struct dmaengine_desc_callback cb;
- unsigned long flags;
- LIST_HEAD(cyclic_list);
-
- memset(&cb, 0, sizeof(cb));
- spin_lock_irqsave(&schan->chan_lock, flags);
- list_for_each_entry_safe(desc, _desc, &schan->ld_queue, node) {
- struct dma_async_tx_descriptor *tx = &desc->async_tx;
-
- BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie);
- BUG_ON(desc->mark != DESC_SUBMITTED &&
- desc->mark != DESC_COMPLETED &&
- desc->mark != DESC_WAITING);
-
- /*
- * queue is ordered, and we use this loop to (1) clean up all
- * completed descriptors, and to (2) update descriptor flags of
- * any chunks in a (partially) completed chain
- */
- if (!all && desc->mark == DESC_SUBMITTED &&
- desc->cookie != cookie)
- break;
-
- if (tx->cookie > 0)
- cookie = tx->cookie;
-
- if (desc->mark == DESC_COMPLETED && desc->chunks == 1) {
- if (schan->dma_chan.completed_cookie != desc->cookie - 1)
- dev_dbg(schan->dev,
- "Completing cookie %d, expected %d\n",
- desc->cookie,
- schan->dma_chan.completed_cookie + 1);
- schan->dma_chan.completed_cookie = desc->cookie;
- }
-
- /* Call callback on the last chunk */
- if (desc->mark == DESC_COMPLETED && tx->callback) {
- desc->mark = DESC_WAITING;
- dmaengine_desc_get_callback(tx, &cb);
- callback = tx->callback;
- dev_dbg(schan->dev, "descriptor #%d@%p on %d callback\n",
- tx->cookie, tx, schan->id);
- BUG_ON(desc->chunks != 1);
- break;
- }
-
- if (tx->cookie > 0 || tx->cookie == -EBUSY) {
- if (desc->mark == DESC_COMPLETED) {
- BUG_ON(tx->cookie < 0);
- desc->mark = DESC_WAITING;
- }
- head_acked = async_tx_test_ack(tx);
- } else {
- switch (desc->mark) {
- case DESC_COMPLETED:
- desc->mark = DESC_WAITING;
- fallthrough;
- case DESC_WAITING:
- if (head_acked)
- async_tx_ack(&desc->async_tx);
- }
- }
-
- dev_dbg(schan->dev, "descriptor %p #%d completed.\n",
- tx, tx->cookie);
-
- if (((desc->mark == DESC_COMPLETED ||
- desc->mark == DESC_WAITING) &&
- async_tx_test_ack(&desc->async_tx)) || all) {
-
- if (all || !desc->cyclic) {
- /* Remove from ld_queue list */
- desc->mark = DESC_IDLE;
- list_move(&desc->node, &schan->ld_free);
- } else {
- /* reuse as cyclic */
- desc->mark = DESC_SUBMITTED;
- list_move_tail(&desc->node, &cyclic_list);
- }
-
- if (list_empty(&schan->ld_queue)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- } else if (schan->pm_state == SHDMA_PM_PENDING) {
- shdma_chan_xfer_ld_queue(schan);
- }
- }
- }
-
- if (all && !callback)
- /*
- * Terminating and the loop completed normally: forgive
- * uncompleted cookies
- */
- schan->dma_chan.completed_cookie = schan->dma_chan.cookie;
-
- list_splice_tail(&cyclic_list, &schan->ld_queue);
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- dmaengine_desc_callback_invoke(&cb, NULL);
-
- return callback;
-}
-
-/*
- * shdma_chan_ld_cleanup - Clean up link descriptors
- *
- * Clean up the ld_queue of DMA channel.
- */
-static void shdma_chan_ld_cleanup(struct shdma_chan *schan, bool all)
-{
- while (__ld_cleanup(schan, all))
- ;
-}
-
-/*
- * shdma_free_chan_resources - Free all resources of the channel.
- */
-static void shdma_free_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- LIST_HEAD(list);
-
- /* Protect against ISR */
- spin_lock_irq(&schan->chan_lock);
- ops->halt_channel(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- /* Now no new interrupts will occur */
-
- /* Prepared and not submitted descriptors can still be on the queue */
- if (!list_empty(&schan->ld_queue))
- shdma_chan_ld_cleanup(schan, true);
-
- if (schan->slave_id >= 0) {
- /* The caller is holding dma_list_mutex */
- clear_bit(schan->slave_id, shdma_slave_used);
- chan->private = NULL;
- }
-
- schan->real_slave_id = 0;
-
- spin_lock_irq(&schan->chan_lock);
-
- list_splice_init(&schan->ld_free, &list);
- schan->desc_num = 0;
-
- spin_unlock_irq(&schan->chan_lock);
-
- kfree(schan->desc);
-}
-
-/**
- * shdma_add_desc - get, set up and return one transfer descriptor
- * @schan: DMA channel
- * @flags: DMA transfer flags
- * @dst: destination DMA address, incremented when direction equals
- * DMA_DEV_TO_MEM or DMA_MEM_TO_MEM
- * @src: source DMA address, incremented when direction equals
- * DMA_MEM_TO_DEV or DMA_MEM_TO_MEM
- * @len: DMA transfer length
- * @first: if NULL, set to the current descriptor and cookie set to -EBUSY
- * @direction: needed for slave DMA to decide which address to keep constant,
- * equals DMA_MEM_TO_MEM for MEMCPY
- * Returns 0 or an error
- * Locks: called with desc_lock held
- */
-static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan,
- unsigned long flags, dma_addr_t *dst, dma_addr_t *src, size_t *len,
- struct shdma_desc **first, enum dma_transfer_direction direction)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *new;
- size_t copy_size = *len;
-
- if (!copy_size)
- return NULL;
-
- /* Allocate the link descriptor from the free list */
- new = shdma_get_desc(schan);
- if (!new) {
- dev_err(schan->dev, "No free link descriptor available\n");
- return NULL;
- }
-
- ops->desc_setup(schan, new, *src, *dst, ©_size);
-
- if (!*first) {
- /* First desc */
- new->async_tx.cookie = -EBUSY;
- *first = new;
- } else {
- /* Other desc - invisible to the user */
- new->async_tx.cookie = -EINVAL;
- }
-
- dev_dbg(schan->dev,
- "chaining (%zu/%zu)@%pad -> %pad with %p, cookie %d\n",
- copy_size, *len, src, dst, &new->async_tx,
- new->async_tx.cookie);
-
- new->mark = DESC_PREPARED;
- new->async_tx.flags = flags;
- new->direction = direction;
- new->partial = 0;
-
- *len -= copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV)
- *src += copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_DEV_TO_MEM)
- *dst += copy_size;
-
- return new;
-}
-
-/*
- * shdma_prep_sg - prepare transfer descriptors from an SG list
- *
- * Common routine for public (MEMCPY) and slave DMA. The MEMCPY case is also
- * converted to scatter-gather to guarantee consistent locking and a correct
- * list manipulation. For slave DMA direction carries the usual meaning, and,
- * logically, the SG list is RAM and the addr variable contains slave address,
- * e.g., the FIFO I/O register. For MEMCPY direction equals DMA_MEM_TO_MEM
- * and the SG list contains only one element and points at the source buffer.
- */
-static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan,
- struct scatterlist *sgl, unsigned int sg_len, dma_addr_t *addr,
- enum dma_transfer_direction direction, unsigned long flags, bool cyclic)
-{
- struct scatterlist *sg;
- struct shdma_desc *first = NULL, *new = NULL /* compiler... */;
- LIST_HEAD(tx_list);
- int chunks = 0;
- unsigned long irq_flags;
- int i;
-
- for_each_sg(sgl, sg, sg_len, i)
- chunks += DIV_ROUND_UP(sg_dma_len(sg), schan->max_xfer_len);
-
- /* Have to lock the whole loop to protect against concurrent release */
- spin_lock_irqsave(&schan->chan_lock, irq_flags);
-
- /*
- * Chaining:
- * first descriptor is what user is dealing with in all API calls, its
- * cookie is at first set to -EBUSY, at tx-submit to a positive
- * number
- * if more than one chunk is needed further chunks have cookie = -EINVAL
- * the last chunk, if not equal to the first, has cookie = -ENOSPC
- * all chunks are linked onto the tx_list head with their .node heads
- * only during this function, then they are immediately spliced
- * back onto the free list in form of a chain
- */
- for_each_sg(sgl, sg, sg_len, i) {
- dma_addr_t sg_addr = sg_dma_address(sg);
- size_t len = sg_dma_len(sg);
-
- if (!len)
- goto err_get_desc;
-
- do {
- dev_dbg(schan->dev, "Add SG #%d@%p[%zu], dma %pad\n",
- i, sg, len, &sg_addr);
-
- if (direction == DMA_DEV_TO_MEM)
- new = shdma_add_desc(schan, flags,
- &sg_addr, addr, &len, &first,
- direction);
- else
- new = shdma_add_desc(schan, flags,
- addr, &sg_addr, &len, &first,
- direction);
- if (!new)
- goto err_get_desc;
-
- new->cyclic = cyclic;
- if (cyclic)
- new->chunks = 1;
- else
- new->chunks = chunks--;
- list_add_tail(&new->node, &tx_list);
- } while (len);
- }
-
- if (new != first)
- new->async_tx.cookie = -ENOSPC;
-
- /* Put them back on the free list, so, they don't get lost */
- list_splice_tail(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return &first->async_tx;
-
-err_get_desc:
- list_for_each_entry(new, &tx_list, node)
- new->mark = DESC_IDLE;
- list_splice(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return NULL;
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_memcpy(
- struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
- size_t len, unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct scatterlist sg;
-
- if (!chan || !len)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_src)), len,
- offset_in_page(dma_src));
- sg_dma_address(&sg) = dma_src;
- sg_dma_len(&sg) = len;
-
- return shdma_prep_sg(schan, &sg, 1, &dma_dest, DMA_MEM_TO_MEM,
- flags, false);
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_slave_sg(
- struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
- enum dma_transfer_direction direction, unsigned long flags, void *context)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || !sg_len) {
- dev_warn(schan->dev, "%s: bad parameter: len=%d, id=%d\n",
- __func__, sg_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- return shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, false);
-}
-
-#define SHDMA_MAX_SG_LEN 32
-
-static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
- struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
- size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- struct dma_async_tx_descriptor *desc;
- const struct shdma_ops *ops = sdev->ops;
- unsigned int sg_len = buf_len / period_len;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
- struct scatterlist *sgl;
- int i;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- if (sg_len > SHDMA_MAX_SG_LEN) {
- dev_err(schan->dev, "sg length %d exceeds limit %d",
- sg_len, SHDMA_MAX_SG_LEN);
- return NULL;
- }
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || (buf_len < period_len)) {
- dev_warn(schan->dev,
- "%s: bad parameter: buf_len=%zu, period_len=%zu, id=%d\n",
- __func__, buf_len, period_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- /*
- * Allocate the sg list dynamically as it would consumer too much stack
- * space.
- */
- sgl = kmalloc_array(sg_len, sizeof(*sgl), GFP_KERNEL);
- if (!sgl)
- return NULL;
-
- sg_init_table(sgl, sg_len);
-
- for (i = 0; i < sg_len; i++) {
- dma_addr_t src = buf_addr + (period_len * i);
-
- sg_set_page(&sgl[i], pfn_to_page(PFN_DOWN(src)), period_len,
- offset_in_page(src));
- sg_dma_address(&sgl[i]) = src;
- sg_dma_len(&sgl[i]) = period_len;
- }
-
- desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, true);
-
- kfree(sgl);
- return desc;
-}
-
-static int shdma_terminate_all(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- unsigned long flags;
-
- spin_lock_irqsave(&schan->chan_lock, flags);
- ops->halt_channel(schan);
-
- if (ops->get_partial && !list_empty(&schan->ld_queue)) {
- /* Record partial transfer */
- struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
- struct shdma_desc, node);
- desc->partial = ops->get_partial(schan, desc);
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- shdma_chan_ld_cleanup(schan, true);
-
- return 0;
-}
-
-static int shdma_config(struct dma_chan *chan,
- struct dma_slave_config *config)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- /*
- * So far only .slave_id is used, but the slave drivers are
- * encouraged to also set a transfer direction and an address.
- */
- if (!config)
- return -EINVAL;
-
- /*
- * We could lock this, but you shouldn't be configuring the
- * channel, while using it...
- */
- return shdma_setup_slave(schan,
- config->direction == DMA_DEV_TO_MEM ?
- config->src_addr : config->dst_addr);
-}
-
-static void shdma_issue_pending(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- spin_lock_irq(&schan->chan_lock);
- if (schan->pm_state == SHDMA_PM_ESTABLISHED)
- shdma_chan_xfer_ld_queue(schan);
- else
- schan->pm_state = SHDMA_PM_PENDING;
- spin_unlock_irq(&schan->chan_lock);
-}
-
-static enum dma_status shdma_tx_status(struct dma_chan *chan,
- dma_cookie_t cookie,
- struct dma_tx_state *txstate)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- enum dma_status status;
- unsigned long flags;
-
- shdma_chan_ld_cleanup(schan, false);
-
- spin_lock_irqsave(&schan->chan_lock, flags);
-
- status = dma_cookie_status(chan, cookie, txstate);
-
- /*
- * If we don't find cookie on the queue, it has been aborted and we have
- * to report error
- */
- if (status != DMA_COMPLETE) {
- struct shdma_desc *sdesc;
- status = DMA_ERROR;
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->cookie == cookie) {
- status = DMA_IN_PROGRESS;
- break;
- }
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- return status;
-}
-
-/* Called from error IRQ or NMI */
-bool shdma_reset(struct shdma_dev *sdev)
-{
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_chan *schan;
- unsigned int handled = 0;
- int i;
-
- /* Reset all channels */
- shdma_for_each_chan(schan, sdev, i) {
- struct shdma_desc *sdesc;
- LIST_HEAD(dl);
-
- if (!schan)
- continue;
-
- spin_lock(&schan->chan_lock);
-
- /* Stop the channel */
- ops->halt_channel(schan);
-
- list_splice_init(&schan->ld_queue, &dl);
-
- if (!list_empty(&dl)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- }
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- spin_unlock(&schan->chan_lock);
-
- /* Complete all */
- list_for_each_entry(sdesc, &dl, node) {
- struct dma_async_tx_descriptor *tx = &sdesc->async_tx;
-
- sdesc->mark = DESC_IDLE;
- dmaengine_desc_get_callback_invoke(tx, NULL);
- }
-
- spin_lock(&schan->chan_lock);
- list_splice(&dl, &schan->ld_free);
- spin_unlock(&schan->chan_lock);
-
- handled++;
- }
-
- return !!handled;
-}
-EXPORT_SYMBOL(shdma_reset);
-
-static irqreturn_t chan_irq(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- irqreturn_t ret;
-
- spin_lock(&schan->chan_lock);
-
- ret = ops->chan_irq(schan, irq) ? IRQ_WAKE_THREAD : IRQ_NONE;
-
- spin_unlock(&schan->chan_lock);
-
- return ret;
-}
-
-static irqreturn_t chan_irqt(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- struct shdma_desc *sdesc;
-
- spin_lock_irq(&schan->chan_lock);
- list_for_each_entry(sdesc, &schan->ld_queue, node) {
- if (sdesc->mark == DESC_SUBMITTED &&
- ops->desc_completed(schan, sdesc)) {
- dev_dbg(schan->dev, "done #%d@%p\n",
- sdesc->async_tx.cookie, &sdesc->async_tx);
- sdesc->mark = DESC_COMPLETED;
- break;
- }
- }
- /* Next desc */
- shdma_chan_xfer_ld_queue(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- shdma_chan_ld_cleanup(schan, false);
-
- return IRQ_HANDLED;
-}
-
-int shdma_request_irq(struct shdma_chan *schan, int irq,
- unsigned long flags, const char *name)
-{
- int ret = devm_request_threaded_irq(schan->dev, irq, chan_irq,
- chan_irqt, flags, name, schan);
-
- schan->irq = ret < 0 ? ret : irq;
-
- return ret;
-}
-EXPORT_SYMBOL(shdma_request_irq);
-
-void shdma_chan_probe(struct shdma_dev *sdev,
- struct shdma_chan *schan, int id)
-{
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- /* reference struct dma_device */
- schan->dma_chan.device = &sdev->dma_dev;
- dma_cookie_init(&schan->dma_chan);
-
- schan->dev = sdev->dma_dev.dev;
- schan->id = id;
-
- if (!schan->max_xfer_len)
- schan->max_xfer_len = PAGE_SIZE;
-
- spin_lock_init(&schan->chan_lock);
-
- /* Init descripter manage list */
- INIT_LIST_HEAD(&schan->ld_queue);
- INIT_LIST_HEAD(&schan->ld_free);
-
- /* Add the channel to DMA device channel list */
- list_add_tail(&schan->dma_chan.device_node,
- &sdev->dma_dev.channels);
- sdev->schan[id] = schan;
-}
-EXPORT_SYMBOL(shdma_chan_probe);
-
-void shdma_chan_remove(struct shdma_chan *schan)
-{
- list_del(&schan->dma_chan.device_node);
-}
-EXPORT_SYMBOL(shdma_chan_remove);
-
-int shdma_init(struct device *dev, struct shdma_dev *sdev,
- int chan_num)
-{
- struct dma_device *dma_dev = &sdev->dma_dev;
-
- /*
- * Require all call-backs for now, they can trivially be made optional
- * later as required
- */
- if (!sdev->ops ||
- !sdev->desc_size ||
- !sdev->ops->embedded_desc ||
- !sdev->ops->start_xfer ||
- !sdev->ops->setup_xfer ||
- !sdev->ops->set_slave ||
- !sdev->ops->desc_setup ||
- !sdev->ops->slave_addr ||
- !sdev->ops->channel_busy ||
- !sdev->ops->halt_channel ||
- !sdev->ops->desc_completed)
- return -EINVAL;
-
- sdev->schan = kcalloc(chan_num, sizeof(*sdev->schan), GFP_KERNEL);
- if (!sdev->schan)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&dma_dev->channels);
-
- /* Common and MEMCPY operations */
- dma_dev->device_alloc_chan_resources
- = shdma_alloc_chan_resources;
- dma_dev->device_free_chan_resources = shdma_free_chan_resources;
- dma_dev->device_prep_dma_memcpy = shdma_prep_memcpy;
- dma_dev->device_tx_status = shdma_tx_status;
- dma_dev->device_issue_pending = shdma_issue_pending;
-
- /* Compulsory for DMA_SLAVE fields */
- dma_dev->device_prep_slave_sg = shdma_prep_slave_sg;
- dma_dev->device_prep_dma_cyclic = shdma_prep_dma_cyclic;
- dma_dev->device_config = shdma_config;
- dma_dev->device_terminate_all = shdma_terminate_all;
-
- dma_dev->dev = dev;
-
- return 0;
-}
-EXPORT_SYMBOL(shdma_init);
-
-void shdma_cleanup(struct shdma_dev *sdev)
-{
- kfree(sdev->schan);
-}
-EXPORT_SYMBOL(shdma_cleanup);
-
-static int __init shdma_enter(void)
-{
- shdma_slave_used = bitmap_zalloc(slave_num, GFP_KERNEL);
- if (!shdma_slave_used)
- return -ENOMEM;
- return 0;
-}
-module_init(shdma_enter);
-
-static void __exit shdma_exit(void)
-{
- bitmap_free(shdma_slave_used);
-}
-module_exit(shdma_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH-DMA driver base library");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
deleted file mode 100644
index 9c121a4b33ad82..00000000000000
--- a/drivers/dma/sh/shdma.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Renesas SuperH DMA Engine support
- *
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- *
- */
-#ifndef __DMA_SHDMA_H
-#define __DMA_SHDMA_H
-
-#include <linux/sh_dma.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#define SH_DMAE_MAX_CHANNELS 20
-#define SH_DMAE_TCR_MAX 0x00FFFFFF /* 16MB */
-
-struct device;
-
-struct sh_dmae_chan {
- struct shdma_chan shdma_chan;
- const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
- int xmit_shift; /* log_2(bytes_per_xfer) */
- void __iomem *base;
- char dev_id[16]; /* unique name per DMAC of channel */
- int pm_error;
- dma_addr_t slave_addr;
-};
-
-struct sh_dmae_device {
- struct shdma_dev shdma_dev;
- struct sh_dmae_chan *chan[SH_DMAE_MAX_CHANNELS];
- const struct sh_dmae_pdata *pdata;
- struct list_head node;
- void __iomem *chan_reg;
- void __iomem *dmars;
- unsigned int chcr_offset;
- u32 chcr_ie_bit;
-};
-
-struct sh_dmae_regs {
- u32 sar; /* SAR / source address */
- u32 dar; /* DAR / destination address */
- u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_dmae_desc {
- struct sh_dmae_regs hw;
- struct shdma_desc shdma_desc;
-};
-
-#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, shdma_chan)
-#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
-#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
-#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
- struct sh_dmae_device, shdma_dev.dma_dev)
-
-#endif /* __DMA_SHDMA_H */
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
deleted file mode 100644
index 5aafe548ca5f30..00000000000000
--- a/drivers/dma/sh/shdmac.c
+++ /dev/null
@@ -1,938 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas SuperH DMA Engine support
- *
- * base is drivers/dma/flsdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * - DMA of SuperH does not have Hardware DMA chain mode.
- * - MAX DMA size is 16MB.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kdebug.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/rculist.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-#include "shdma.h"
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-#define TEND 0x18 /* USB-DMAC */
-
-#define SH_DMAE_DRV_NAME "sh-dma-engine"
-
-/* Default MEMCPY transfer size = 2^2 = 4 bytes */
-#define LOG2_DEFAULT_XFER_SIZE 2
-#define SH_DMA_SLAVE_NUMBER 256
-#define SH_DMA_TCR_MAX (16 * 1024 * 1024 - 1)
-
-/*
- * Used for write-side mutual exclusion for the global device list,
- * read-side synchronization by way of RCU, and per-controller data.
- */
-static DEFINE_SPINLOCK(sh_dmae_lock);
-static LIST_HEAD(sh_dmae_devices);
-
-/*
- * Different DMAC implementations provide different ways to clear DMA channels:
- * (1) none - no CHCLR registers are available
- * (2) one CHCLR register per channel - 0 has to be written to it to clear
- * channel buffers
- * (3) one CHCLR per several channels - 1 has to be written to the bit,
- * corresponding to the specific channel to reset it
- */
-static void channel_clear(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
- const struct sh_dmae_channel *chan_pdata = shdev->pdata->channel +
- sh_dc->shdma_chan.id;
- u32 val = shdev->pdata->chclr_bitwise ? 1 << chan_pdata->chclr_bit : 0;
-
- __raw_writel(val, shdev->chan_reg + chan_pdata->chclr_offset);
-}
-
-static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
-{
- __raw_writel(data, sh_dc->base + reg);
-}
-
-static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
-{
- return __raw_readl(sh_dc->base + reg);
-}
-
-static u16 dmaor_read(struct sh_dmae_device *shdev)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- return __raw_readl(addr);
- else
- return __raw_readw(addr);
-}
-
-static void dmaor_write(struct sh_dmae_device *shdev, u16 data)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- __raw_writel(data, addr);
- else
- __raw_writew(data, addr);
-}
-
-static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- __raw_writel(data, sh_dc->base + shdev->chcr_offset);
-}
-
-static u32 chcr_read(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- return __raw_readl(sh_dc->base + shdev->chcr_offset);
-}
-
-/*
- * Reset DMA controller
- *
- * SH7780 has two DMAOR register
- */
-static void sh_dmae_ctl_stop(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev);
- dmaor_write(shdev, dmaor & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME));
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-}
-
-static int sh_dmae_rst(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev) & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME);
-
- if (shdev->pdata->chclr_present) {
- int i;
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
- if (sh_chan)
- channel_clear(sh_chan);
- }
- }
-
- dmaor_write(shdev, dmaor | shdev->pdata->dmaor_init);
-
- dmaor = dmaor_read(shdev);
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-
- if (dmaor & (DMAOR_AE | DMAOR_NMIF)) {
- dev_warn(shdev->shdma_dev.dma_dev.dev, "Can't initialize DMAOR.\n");
- return -EIO;
- }
- if (shdev->pdata->dmaor_init & ~dmaor)
- dev_warn(shdev->shdma_dev.dma_dev.dev,
- "DMAOR=0x%x hasn't latched the initial value 0x%x.\n",
- dmaor, shdev->pdata->dmaor_init);
- return 0;
-}
-
-static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
-{
- u32 chcr = chcr_read(sh_chan);
-
- if ((chcr & (CHCR_DE | CHCR_TE)) == CHCR_DE)
- return true; /* working */
-
- return false; /* waiting */
-}
-
-static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) |
- ((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift);
-
- if (cnt >= pdata->ts_shift_num)
- cnt = 0;
-
- return pdata->ts_shift[cnt];
-}
-
-static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int i;
-
- for (i = 0; i < pdata->ts_shift_num; i++)
- if (pdata->ts_shift[i] == l2size)
- break;
-
- if (i == pdata->ts_shift_num)
- i = 0;
-
- return ((i << pdata->ts_low_shift) & pdata->ts_low_mask) |
- ((i << pdata->ts_high_shift) & pdata->ts_high_mask);
-}
-
-static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
-{
- sh_dmae_writel(sh_chan, hw->sar, SAR);
- sh_dmae_writel(sh_chan, hw->dar, DAR);
- sh_dmae_writel(sh_chan, hw->tcr >> sh_chan->xmit_shift, TCR);
-}
-
-static void dmae_start(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- if (shdev->pdata->needs_tend_set)
- sh_dmae_writel(sh_chan, 0xFFFFFFFF, TEND);
-
- chcr |= CHCR_DE | shdev->chcr_ie_bit;
- chcr_write(sh_chan, chcr & ~CHCR_TE);
-}
-
-static void dmae_init(struct sh_dmae_chan *sh_chan)
-{
- /*
- * Default configuration for dual address memory-memory transfer.
- */
- u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan,
- LOG2_DEFAULT_XFER_SIZE);
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
- chcr_write(sh_chan, chcr);
-}
-
-static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
-{
- /* If DMA is active, cannot set CHCR. TODO: remove this superfluous check */
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, val);
- chcr_write(sh_chan, val);
-
- return 0;
-}
-
-static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->shdma_chan.id];
- void __iomem *addr = shdev->dmars;
- unsigned int shift = chan_pdata->dmars_bit;
-
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- if (pdata->no_dmars)
- return 0;
-
- /* in the case of a missing DMARS resource use first memory window */
- if (!addr)
- addr = shdev->chan_reg;
- addr += chan_pdata->dmars;
-
- __raw_writew((__raw_readw(addr) & (0xff00 >> shift)) | (val << shift),
- addr);
-
- return 0;
-}
-
-static void sh_dmae_start_xfer(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- dev_dbg(sh_chan->shdma_chan.dev, "Queue #%d to %d: %u@%x -> %x\n",
- sdesc->async_tx.cookie, sh_chan->shdma_chan.id,
- sh_desc->hw.tcr, sh_desc->hw.sar, sh_desc->hw.dar);
- /* Get the ld start address from ld_queue */
- dmae_set_reg(sh_chan, &sh_desc->hw);
- dmae_start(sh_chan);
-}
-
-static bool sh_dmae_channel_busy(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- return dmae_is_busy(sh_chan);
-}
-
-static void sh_dmae_setup_xfer(struct shdma_chan *schan,
- int slave_id)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg =
- sh_chan->config;
-
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
-}
-
-/*
- * Find a slave channel configuration from the contoller list by either a slave
- * ID in the non-DT case, or by a MID/RID value in the DT case
- */
-static const struct sh_dmae_slave_config *dmae_find_slave(
- struct sh_dmae_chan *sh_chan, int match)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_slave_config *cfg;
- int i;
-
- if (!sh_chan->shdma_chan.dev->of_node) {
- if (match >= SH_DMA_SLAVE_NUMBER)
- return NULL;
-
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->slave_id == match)
- return cfg;
- } else {
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->mid_rid == match) {
- sh_chan->shdma_chan.slave_id = i;
- return cfg;
- }
- }
-
- return NULL;
-}
-
-static int sh_dmae_set_slave(struct shdma_chan *schan,
- int slave_id, dma_addr_t slave_addr, bool try)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- const struct sh_dmae_slave_config *cfg = dmae_find_slave(sh_chan, slave_id);
- if (!cfg)
- return -ENXIO;
-
- if (!try) {
- sh_chan->config = cfg;
- sh_chan->slave_addr = slave_addr ? : cfg->addr;
- }
-
- return 0;
-}
-
-static void dmae_halt(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- chcr &= ~(CHCR_DE | CHCR_TE | shdev->chcr_ie_bit);
- chcr_write(sh_chan, chcr);
-}
-
-static int sh_dmae_desc_setup(struct shdma_chan *schan,
- struct shdma_desc *sdesc,
- dma_addr_t src, dma_addr_t dst, size_t *len)
-{
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
-
- if (*len > schan->max_xfer_len)
- *len = schan->max_xfer_len;
-
- sh_desc->hw.sar = src;
- sh_desc->hw.dar = dst;
- sh_desc->hw.tcr = *len;
-
- return 0;
-}
-
-static void sh_dmae_halt(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- dmae_halt(sh_chan);
-}
-
-static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (!(chcr_read(sh_chan) & CHCR_TE))
- return false;
-
- /* DMA stop */
- dmae_halt(sh_chan);
-
- return true;
-}
-
-static size_t sh_dmae_get_partial(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- return sh_desc->hw.tcr -
- (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift);
-}
-
-/* Called from error IRQ or NMI */
-static bool sh_dmae_reset(struct sh_dmae_device *shdev)
-{
- bool ret;
-
- /* halt the dma controller */
- sh_dmae_ctl_stop(shdev);
-
- /* We cannot detect, which channel caused the error, have to reset all */
- ret = shdma_reset(&shdev->shdma_dev);
-
- sh_dmae_rst(shdev);
-
- return ret;
-}
-
-static irqreturn_t sh_dmae_err(int irq, void *data)
-{
- struct sh_dmae_device *shdev = data;
-
- if (!(dmaor_read(shdev) & DMAOR_AE))
- return IRQ_NONE;
-
- sh_dmae_reset(shdev);
- return IRQ_HANDLED;
-}
-
-static bool sh_dmae_desc_completed(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
- u32 dar_buf = sh_dmae_readl(sh_chan, DAR);
-
- return (sdesc->direction == DMA_DEV_TO_MEM &&
- (sh_desc->hw.dar + sh_desc->hw.tcr) == dar_buf) ||
- (sdesc->direction != DMA_DEV_TO_MEM &&
- (sh_desc->hw.sar + sh_desc->hw.tcr) == sar_buf);
-}
-
-static bool sh_dmae_nmi_notify(struct sh_dmae_device *shdev)
-{
- /* Fast path out if NMIF is not asserted for this controller */
- if ((dmaor_read(shdev) & DMAOR_NMIF) == 0)
- return false;
-
- return sh_dmae_reset(shdev);
-}
-
-static int sh_dmae_nmi_handler(struct notifier_block *self,
- unsigned long cmd, void *data)
-{
- struct sh_dmae_device *shdev;
- int ret = NOTIFY_DONE;
- bool triggered;
-
- /*
- * Only concern ourselves with NMI events.
- *
- * Normally we would check the die chain value, but as this needs
- * to be architecture independent, check for NMI context instead.
- */
- if (!in_nmi())
- return NOTIFY_DONE;
-
- rcu_read_lock();
- list_for_each_entry_rcu(shdev, &sh_dmae_devices, node) {
- /*
- * Only stop if one of the controllers has NMIF asserted,
- * we do not want to interfere with regular address error
- * handling or NMI events that don't concern the DMACs.
- */
- triggered = sh_dmae_nmi_notify(shdev);
- if (triggered == true)
- ret = NOTIFY_OK;
- }
- rcu_read_unlock();
-
- return ret;
-}
-
-static struct notifier_block sh_dmae_nmi_notifier __read_mostly = {
- .notifier_call = sh_dmae_nmi_handler,
-
- /* Run before NMI debug handler and KGDB */
- .priority = 1,
-};
-
-static int sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
- int irq, unsigned long flags)
-{
- const struct sh_dmae_channel *chan_pdata = &shdev->pdata->channel[id];
- struct shdma_dev *sdev = &shdev->shdma_dev;
- struct platform_device *pdev = to_platform_device(sdev->dma_dev.dev);
- struct sh_dmae_chan *sh_chan;
- struct shdma_chan *schan;
- int err;
-
- sh_chan = devm_kzalloc(sdev->dma_dev.dev, sizeof(struct sh_dmae_chan),
- GFP_KERNEL);
- if (!sh_chan)
- return -ENOMEM;
-
- schan = &sh_chan->shdma_chan;
- schan->max_xfer_len = SH_DMA_TCR_MAX + 1;
-
- shdma_chan_probe(sdev, schan, id);
-
- sh_chan->base = shdev->chan_reg + chan_pdata->offset;
-
- /* set up channel irq */
- if (pdev->id >= 0)
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dmae%d.%d", pdev->id, id);
- else
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dma%d", id);
-
- err = shdma_request_irq(schan, irq, flags, sh_chan->dev_id);
- if (err) {
- dev_err(sdev->dma_dev.dev,
- "DMA channel %d request_irq error %d\n",
- id, err);
- goto err_no_irq;
- }
-
- shdev->chan[id] = sh_chan;
- return 0;
-
-err_no_irq:
- /* remove from dmaengine device node */
- shdma_chan_remove(schan);
- return err;
-}
-
-static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
-{
- struct shdma_chan *schan;
- int i;
-
- shdma_for_each_chan(schan, &shdev->shdma_dev, i) {
- BUG_ON(!schan);
-
- shdma_chan_remove(schan);
- }
-}
-
-#ifdef CONFIG_PM
-static int sh_dmae_runtime_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_runtime_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- return sh_dmae_rst(shdev);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int sh_dmae_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
- int i, ret;
-
- ret = sh_dmae_rst(shdev);
- if (ret < 0)
- dev_err(dev, "Failed to reset!\n");
-
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
-
- if (!sh_chan->shdma_chan.desc_num)
- continue;
-
- if (sh_chan->shdma_chan.slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg = sh_chan->config;
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
- }
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops sh_dmae_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(sh_dmae_suspend, sh_dmae_resume)
- SET_RUNTIME_PM_OPS(sh_dmae_runtime_suspend, sh_dmae_runtime_resume,
- NULL)
-};
-
-static dma_addr_t sh_dmae_slave_addr(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
-
- /*
- * Implicit BUG_ON(!sh_chan->config)
- * This is an exclusive slave DMA operation, may only be called after a
- * successful slave configuration.
- */
- return sh_chan->slave_addr;
-}
-
-static struct shdma_desc *sh_dmae_embedded_desc(void *buf, int i)
-{
- return &((struct sh_dmae_desc *)buf)[i].shdma_desc;
-}
-
-static const struct shdma_ops sh_dmae_shdma_ops = {
- .desc_completed = sh_dmae_desc_completed,
- .halt_channel = sh_dmae_halt,
- .channel_busy = sh_dmae_channel_busy,
- .slave_addr = sh_dmae_slave_addr,
- .desc_setup = sh_dmae_desc_setup,
- .set_slave = sh_dmae_set_slave,
- .setup_xfer = sh_dmae_setup_xfer,
- .start_xfer = sh_dmae_start_xfer,
- .embedded_desc = sh_dmae_embedded_desc,
- .chan_irq = sh_dmae_chan_irq,
- .get_partial = sh_dmae_get_partial,
-};
-
-static int sh_dmae_probe(struct platform_device *pdev)
-{
- const enum dma_slave_buswidth widths =
- DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
- DMA_SLAVE_BUSWIDTH_4_BYTES | DMA_SLAVE_BUSWIDTH_8_BYTES |
- DMA_SLAVE_BUSWIDTH_16_BYTES | DMA_SLAVE_BUSWIDTH_32_BYTES;
- const struct sh_dmae_pdata *pdata;
- unsigned long chan_flag[SH_DMAE_MAX_CHANNELS] = {};
- int chan_irq[SH_DMAE_MAX_CHANNELS];
- unsigned long irqflags = 0;
- int err, errirq, i, irq_cnt = 0, irqres = 0, irq_cap = 0;
- struct sh_dmae_device *shdev;
- struct dma_device *dma_dev;
- struct resource *chan, *dmars, *errirq_res, *chanirq_res;
-
- if (pdev->dev.of_node)
- pdata = of_device_get_match_data(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- /* get platform data */
- if (!pdata || !pdata->channel_num)
- return -ENODEV;
-
- chan = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- /* DMARS area is optional */
- dmars = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- /*
- * IRQ resources:
- * 1. there always must be at least one IRQ IO-resource. On SH4 it is
- * the error IRQ, in which case it is the only IRQ in this resource:
- * start == end. If it is the only IRQ resource, all channels also
- * use the same IRQ.
- * 2. DMA channel IRQ resources can be specified one per resource or in
- * ranges (start != end)
- * 3. iff all events (channels and, optionally, error) on this
- * controller use the same IRQ, only one IRQ resource can be
- * specified, otherwise there must be one IRQ per channel, even if
- * some of them are equal
- * 4. if all IRQs on this controller are equal or if some specific IRQs
- * specify IORESOURCE_IRQ_SHAREABLE in their resources, they will be
- * requested with the IRQF_SHARED flag
- */
- errirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!chan || !errirq_res)
- return -ENODEV;
-
- shdev = devm_kzalloc(&pdev->dev, sizeof(struct sh_dmae_device),
- GFP_KERNEL);
- if (!shdev)
- return -ENOMEM;
-
- dma_dev = &shdev->shdma_dev.dma_dev;
-
- shdev->chan_reg = devm_ioremap_resource(&pdev->dev, chan);
- if (IS_ERR(shdev->chan_reg))
- return PTR_ERR(shdev->chan_reg);
- if (dmars) {
- shdev->dmars = devm_ioremap_resource(&pdev->dev, dmars);
- if (IS_ERR(shdev->dmars))
- return PTR_ERR(shdev->dmars);
- }
-
- dma_dev->src_addr_widths = widths;
- dma_dev->dst_addr_widths = widths;
- dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
- dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-
- if (!pdata->slave_only)
- dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
- if (pdata->slave && pdata->slave_num)
- dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
-
- /* Default transfer size of 32 bytes requires 32-byte alignment */
- dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE;
-
- shdev->shdma_dev.ops = &sh_dmae_shdma_ops;
- shdev->shdma_dev.desc_size = sizeof(struct sh_dmae_desc);
- err = shdma_init(&pdev->dev, &shdev->shdma_dev,
- pdata->channel_num);
- if (err < 0)
- goto eshdma;
-
- /* platform data */
- shdev->pdata = pdata;
-
- if (pdata->chcr_offset)
- shdev->chcr_offset = pdata->chcr_offset;
- else
- shdev->chcr_offset = CHCR;
-
- if (pdata->chcr_ie_bit)
- shdev->chcr_ie_bit = pdata->chcr_ie_bit;
- else
- shdev->chcr_ie_bit = CHCR_IE;
-
- platform_set_drvdata(pdev, shdev);
-
- pm_runtime_enable(&pdev->dev);
- err = pm_runtime_get_sync(&pdev->dev);
- if (err < 0)
- dev_err(&pdev->dev, "%s(): GET = %d\n", __func__, err);
-
- spin_lock_irq(&sh_dmae_lock);
- list_add_tail_rcu(&shdev->node, &sh_dmae_devices);
- spin_unlock_irq(&sh_dmae_lock);
-
- /* reset dma controller - only needed as a test */
- err = sh_dmae_rst(shdev);
- if (err)
- goto rst_err;
-
- if (IS_ENABLED(CONFIG_CPU_SH4) || IS_ENABLED(CONFIG_ARCH_RENESAS)) {
- chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-
- if (!chanirq_res)
- chanirq_res = errirq_res;
- else
- irqres++;
-
- if (chanirq_res == errirq_res ||
- (errirq_res->flags & IORESOURCE_BITS) == IORESOURCE_IRQ_SHAREABLE)
- irqflags = IRQF_SHARED;
-
- errirq = errirq_res->start;
-
- err = devm_request_irq(&pdev->dev, errirq, sh_dmae_err,
- irqflags, "DMAC Address Error", shdev);
- if (err) {
- dev_err(&pdev->dev,
- "DMA failed requesting irq #%d, error %d\n",
- errirq, err);
- goto eirq_err;
- }
- } else {
- chanirq_res = errirq_res;
- }
-
- if (chanirq_res->start == chanirq_res->end &&
- !platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
- /* Special case - all multiplexed */
- for (; irq_cnt < pdata->channel_num; irq_cnt++) {
- if (irq_cnt < SH_DMAE_MAX_CHANNELS) {
- chan_irq[irq_cnt] = chanirq_res->start;
- chan_flag[irq_cnt] = IRQF_SHARED;
- } else {
- irq_cap = 1;
- break;
- }
- }
- } else {
- do {
- for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS) {
- irq_cap = 1;
- break;
- }
-
- if ((errirq_res->flags & IORESOURCE_BITS) ==
- IORESOURCE_IRQ_SHAREABLE)
- chan_flag[irq_cnt] = IRQF_SHARED;
- else
- chan_flag[irq_cnt] = 0;
- dev_dbg(&pdev->dev,
- "Found IRQ %d for channel %d\n",
- i, irq_cnt);
- chan_irq[irq_cnt++] = i;
- }
-
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS)
- break;
-
- chanirq_res = platform_get_resource(pdev,
- IORESOURCE_IRQ, ++irqres);
- } while (irq_cnt < pdata->channel_num && chanirq_res);
- }
-
- /* Create DMA Channel */
- for (i = 0; i < irq_cnt; i++) {
- err = sh_dmae_chan_probe(shdev, i, chan_irq[i], chan_flag[i]);
- if (err)
- goto chan_probe_err;
- }
-
- if (irq_cap)
- dev_notice(&pdev->dev, "Attempting to register %d DMA "
- "channels when a maximum of %d are supported.\n",
- pdata->channel_num, SH_DMAE_MAX_CHANNELS);
-
- pm_runtime_put(&pdev->dev);
-
- err = dma_async_device_register(&shdev->shdma_dev.dma_dev);
- if (err < 0)
- goto edmadevreg;
-
- return err;
-
-edmadevreg:
- pm_runtime_get(&pdev->dev);
-
-chan_probe_err:
- sh_dmae_chan_remove(shdev);
-
-eirq_err:
-rst_err:
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- shdma_cleanup(&shdev->shdma_dev);
-eshdma:
- synchronize_rcu();
-
- return err;
-}
-
-static int sh_dmae_remove(struct platform_device *pdev)
-{
- struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
- struct dma_device *dma_dev = &shdev->shdma_dev.dma_dev;
-
- dma_async_device_unregister(dma_dev);
-
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_disable(&pdev->dev);
-
- sh_dmae_chan_remove(shdev);
- shdma_cleanup(&shdev->shdma_dev);
-
- synchronize_rcu();
-
- return 0;
-}
-
-static struct platform_driver sh_dmae_driver = {
- .driver = {
- .pm = &sh_dmae_pm,
- .name = SH_DMAE_DRV_NAME,
- },
- .remove = sh_dmae_remove,
-};
-
-static int __init sh_dmae_init(void)
-{
- /* Wire up NMI handling */
- int err = register_die_notifier(&sh_dmae_nmi_notifier);
- if (err)
- return err;
-
- return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
-}
-module_init(sh_dmae_init);
-
-static void __exit sh_dmae_exit(void)
-{
- platform_driver_unregister(&sh_dmae_driver);
-
- unregister_die_notifier(&sh_dmae_nmi_notifier);
-}
-module_exit(sh_dmae_exit);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
-MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" SH_DMAE_DRV_NAME);
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index 6dfd05ef5c2d9f..dd32aba344757f 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -122,13 +122,9 @@ void shdma_chan_remove(struct shdma_chan *schan);
int shdma_init(struct device *dev, struct shdma_dev *sdev,
int chan_num);
void shdma_cleanup(struct shdma_dev *sdev);
-#if IS_ENABLED(CONFIG_SH_DMAE_BASE)
-bool shdma_chan_filter(struct dma_chan *chan, void *arg);
-#else
static inline bool shdma_chan_filter(struct dma_chan *chan, void *arg)
{
return false;
}
-#endif
#endif
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 08/22] dmaengine: remove the shdmac driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/dma/sh/Kconfig | 20 -
drivers/dma/sh/Makefile | 13 -
drivers/dma/sh/shdma-base.c | 1052 -----------------------------------
drivers/dma/sh/shdma.h | 61 --
drivers/dma/sh/shdmac.c | 938 -------------------------------
include/linux/shdma-base.h | 4 -
6 files changed, 2088 deletions(-)
delete mode 100644 drivers/dma/sh/shdma-base.c
delete mode 100644 drivers/dma/sh/shdma.h
delete mode 100644 drivers/dma/sh/shdmac.c
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index c0b2997ab7fd93..744d4d8ff5353b 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -7,30 +7,10 @@ config RENESAS_DMA
bool
select DMA_ENGINE
-#
-# DMA Engine Helpers
-#
-
-config SH_DMAE_BASE
- bool "Renesas SuperH DMA Engine support"
- depends on SUPERH || COMPILE_TEST
- depends on !SUPERH || SH_DMA
- depends on !SH_DMA_API
- default y
- select RENESAS_DMA
- help
- Enable support for the Renesas SuperH DMA controllers.
-
#
# DMA Controllers
#
-config SH_DMAE
- tristate "Renesas SuperH DMAC support"
- depends on SH_DMAE_BASE
- help
- Enable support for the Renesas SuperH DMA controllers.
-
config RCAR_DMAC
tristate "Renesas R-Car Gen{2,3} and RZ/G{1,2} DMA Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index 360ab6d25e769d..07178651aa7279 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -1,17 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-#
-# DMA Engine Helpers
-#
-
-obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o
-
-#
-# DMA Controllers
-#
-
-shdma-y := shdmac.o
-shdma-objs := $(shdma-y)
-obj-$(CONFIG_SH_DMAE) += shdma.o
obj-$(CONFIG_RCAR_DMAC) += rcar-dmac.o
obj-$(CONFIG_RENESAS_USB_DMAC) += usb-dmac.o
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
deleted file mode 100644
index 158e5e7defaeb0..00000000000000
--- a/drivers/dma/sh/shdma-base.c
+++ /dev/null
@@ -1,1052 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dmaengine driver base library for DMA controllers, found on SH-based SoCs
- *
- * extracted from shdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-
-/* DMA descriptor control */
-enum shdma_desc_status {
- DESC_IDLE,
- DESC_PREPARED,
- DESC_SUBMITTED,
- DESC_COMPLETED, /* completed, have to call callback */
- DESC_WAITING, /* callback called, waiting for ack / re-submit */
-};
-
-#define NR_DESCS_PER_CHANNEL 32
-
-#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan)
-#define to_shdma_dev(d) container_of(d, struct shdma_dev, dma_dev)
-
-/*
- * For slave DMA we assume, that there is a finite number of DMA slaves in the
- * system, and that each such slave can only use a finite number of channels.
- * We use slave channel IDs to make sure, that no such slave channel ID is
- * allocated more than once.
- */
-static unsigned int slave_num = 256;
-module_param(slave_num, uint, 0444);
-
-/* A bitmask with slave_num bits */
-static unsigned long *shdma_slave_used;
-
-/* Called under spin_lock_irq(&schan->chan_lock") */
-static void shdma_chan_xfer_ld_queue(struct shdma_chan *schan)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *sdesc;
-
- /* DMA work check */
- if (ops->channel_busy(schan))
- return;
-
- /* Find the first not transferred descriptor */
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->mark == DESC_SUBMITTED) {
- ops->start_xfer(schan, sdesc);
- break;
- }
-}
-
-static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct shdma_desc *chunk, *c, *desc =
- container_of(tx, struct shdma_desc, async_tx);
- struct shdma_chan *schan = to_shdma_chan(tx->chan);
- dma_async_tx_callback callback = tx->callback;
- dma_cookie_t cookie;
- bool power_up;
-
- spin_lock_irq(&schan->chan_lock);
-
- power_up = list_empty(&schan->ld_queue);
-
- cookie = dma_cookie_assign(tx);
-
- /* Mark all chunks of this descriptor as submitted, move to the queue */
- list_for_each_entry_safe(chunk, c, desc->node.prev, node) {
- /*
- * All chunks are on the global ld_free, so, we have to find
- * the end of the chain ourselves
- */
- if (chunk != desc && (chunk->mark == DESC_IDLE ||
- chunk->async_tx.cookie > 0 ||
- chunk->async_tx.cookie == -EBUSY ||
- &chunk->node == &schan->ld_free))
- break;
- chunk->mark = DESC_SUBMITTED;
- if (chunk->chunks == 1) {
- chunk->async_tx.callback = callback;
- chunk->async_tx.callback_param = tx->callback_param;
- } else {
- /* Callback goes to the last chunk */
- chunk->async_tx.callback = NULL;
- }
- chunk->cookie = cookie;
- list_move_tail(&chunk->node, &schan->ld_queue);
-
- dev_dbg(schan->dev, "submit #%d@%p on %d\n",
- tx->cookie, &chunk->async_tx, schan->id);
- }
-
- if (power_up) {
- int ret;
- schan->pm_state = SHDMA_PM_BUSY;
-
- ret = pm_runtime_get(schan->dev);
-
- spin_unlock_irq(&schan->chan_lock);
- if (ret < 0)
- dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
-
- pm_runtime_barrier(schan->dev);
-
- spin_lock_irq(&schan->chan_lock);
-
- /* Have we been reset, while waiting? */
- if (schan->pm_state != SHDMA_PM_ESTABLISHED) {
- struct shdma_dev *sdev =
- to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- dev_dbg(schan->dev, "Bring up channel %d\n",
- schan->id);
- /*
- * TODO: .xfer_setup() might fail on some platforms.
- * Make it int then, on error remove chunks from the
- * queue again
- */
- ops->setup_xfer(schan, schan->slave_id);
-
- if (schan->pm_state == SHDMA_PM_PENDING)
- shdma_chan_xfer_ld_queue(schan);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- }
- } else {
- /*
- * Tell .device_issue_pending() not to run the queue, interrupts
- * will do it anyway
- */
- schan->pm_state = SHDMA_PM_PENDING;
- }
-
- spin_unlock_irq(&schan->chan_lock);
-
- return cookie;
-}
-
-/* Called with desc_lock held */
-static struct shdma_desc *shdma_get_desc(struct shdma_chan *schan)
-{
- struct shdma_desc *sdesc;
-
- list_for_each_entry(sdesc, &schan->ld_free, node)
- if (sdesc->mark != DESC_PREPARED) {
- BUG_ON(sdesc->mark != DESC_IDLE);
- list_del(&sdesc->node);
- return sdesc;
- }
-
- return NULL;
-}
-
-static int shdma_setup_slave(struct shdma_chan *schan, dma_addr_t slave_addr)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int ret, match;
-
- if (schan->dev->of_node) {
- match = schan->hw_req;
- ret = ops->set_slave(schan, match, slave_addr, true);
- if (ret < 0)
- return ret;
- } else {
- match = schan->real_slave_id;
- }
-
- if (schan->real_slave_id < 0 || schan->real_slave_id >= slave_num)
- return -EINVAL;
-
- if (test_and_set_bit(schan->real_slave_id, shdma_slave_used))
- return -EBUSY;
-
- ret = ops->set_slave(schan, match, slave_addr, false);
- if (ret < 0) {
- clear_bit(schan->real_slave_id, shdma_slave_used);
- return ret;
- }
-
- schan->slave_id = schan->real_slave_id;
-
- return 0;
-}
-
-static int shdma_alloc_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *desc;
- struct shdma_slave *slave = chan->private;
- int ret, i;
-
- /*
- * This relies on the guarantee from dmaengine that alloc_chan_resources
- * never runs concurrently with itself or free_chan_resources.
- */
- if (slave) {
- /* Legacy mode: .private is set in filter */
- schan->real_slave_id = slave->slave_id;
- ret = shdma_setup_slave(schan, 0);
- if (ret < 0)
- goto esetslave;
- } else {
- /* Normal mode: real_slave_id was set by filter */
- schan->slave_id = -EINVAL;
- }
-
- schan->desc = kcalloc(NR_DESCS_PER_CHANNEL,
- sdev->desc_size, GFP_KERNEL);
- if (!schan->desc) {
- ret = -ENOMEM;
- goto edescalloc;
- }
- schan->desc_num = NR_DESCS_PER_CHANNEL;
-
- for (i = 0; i < NR_DESCS_PER_CHANNEL; i++) {
- desc = ops->embedded_desc(schan->desc, i);
- dma_async_tx_descriptor_init(&desc->async_tx,
- &schan->dma_chan);
- desc->async_tx.tx_submit = shdma_tx_submit;
- desc->mark = DESC_IDLE;
-
- list_add(&desc->node, &schan->ld_free);
- }
-
- return NR_DESCS_PER_CHANNEL;
-
-edescalloc:
- if (slave)
-esetslave:
- clear_bit(slave->slave_id, shdma_slave_used);
- chan->private = NULL;
- return ret;
-}
-
-/*
- * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer.
- * You always have to pass a valid slave id as the argument, old drivers that
- * pass ERR_PTR(-EINVAL) as a filter parameter and set it up in dma_slave_config
- * need to be updated so we can remove the slave_id field from dma_slave_config.
- * parameter. If this filter is used, the slave driver, after calling
- * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .direction, and either .src_addr or .dst_addr set.
- *
- * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
- * capability! If this becomes a requirement, hardware glue drivers, using this
- * services would have to provide their own filters, which first would check
- * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
- * this, and only then, in case of a match, call this common filter.
- * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
- * In that case the MID-RID value is used for slave channel filtering and is
- * passed to this function in the "arg" parameter.
- */
-bool shdma_chan_filter(struct dma_chan *chan, void *arg)
-{
- struct shdma_chan *schan;
- struct shdma_dev *sdev;
- int slave_id = (long)arg;
- int ret;
-
- /* Only support channels handled by this driver. */
- if (chan->device->device_alloc_chan_resources !=
- shdma_alloc_chan_resources)
- return false;
-
- schan = to_shdma_chan(chan);
- sdev = to_shdma_dev(chan->device);
-
- /*
- * For DT, the schan->slave_id field is generated by the
- * set_slave function from the slave ID that is passed in
- * from xlate. For the non-DT case, the slave ID is
- * directly passed into the filter function by the driver
- */
- if (schan->dev->of_node) {
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = schan->slave_id;
- return true;
- }
-
- if (slave_id < 0) {
- /* No slave requested - arbitrary channel */
- dev_warn(sdev->dma_dev.dev, "invalid slave ID passed to dma_request_slave\n");
- return true;
- }
-
- if (slave_id >= slave_num)
- return false;
-
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = slave_id;
-
- return true;
-}
-EXPORT_SYMBOL(shdma_chan_filter);
-
-static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
-{
- struct shdma_desc *desc, *_desc;
- /* Is the "exposed" head of a chain acked? */
- bool head_acked = false;
- dma_cookie_t cookie = 0;
- dma_async_tx_callback callback = NULL;
- struct dmaengine_desc_callback cb;
- unsigned long flags;
- LIST_HEAD(cyclic_list);
-
- memset(&cb, 0, sizeof(cb));
- spin_lock_irqsave(&schan->chan_lock, flags);
- list_for_each_entry_safe(desc, _desc, &schan->ld_queue, node) {
- struct dma_async_tx_descriptor *tx = &desc->async_tx;
-
- BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie);
- BUG_ON(desc->mark != DESC_SUBMITTED &&
- desc->mark != DESC_COMPLETED &&
- desc->mark != DESC_WAITING);
-
- /*
- * queue is ordered, and we use this loop to (1) clean up all
- * completed descriptors, and to (2) update descriptor flags of
- * any chunks in a (partially) completed chain
- */
- if (!all && desc->mark == DESC_SUBMITTED &&
- desc->cookie != cookie)
- break;
-
- if (tx->cookie > 0)
- cookie = tx->cookie;
-
- if (desc->mark == DESC_COMPLETED && desc->chunks == 1) {
- if (schan->dma_chan.completed_cookie != desc->cookie - 1)
- dev_dbg(schan->dev,
- "Completing cookie %d, expected %d\n",
- desc->cookie,
- schan->dma_chan.completed_cookie + 1);
- schan->dma_chan.completed_cookie = desc->cookie;
- }
-
- /* Call callback on the last chunk */
- if (desc->mark == DESC_COMPLETED && tx->callback) {
- desc->mark = DESC_WAITING;
- dmaengine_desc_get_callback(tx, &cb);
- callback = tx->callback;
- dev_dbg(schan->dev, "descriptor #%d@%p on %d callback\n",
- tx->cookie, tx, schan->id);
- BUG_ON(desc->chunks != 1);
- break;
- }
-
- if (tx->cookie > 0 || tx->cookie == -EBUSY) {
- if (desc->mark == DESC_COMPLETED) {
- BUG_ON(tx->cookie < 0);
- desc->mark = DESC_WAITING;
- }
- head_acked = async_tx_test_ack(tx);
- } else {
- switch (desc->mark) {
- case DESC_COMPLETED:
- desc->mark = DESC_WAITING;
- fallthrough;
- case DESC_WAITING:
- if (head_acked)
- async_tx_ack(&desc->async_tx);
- }
- }
-
- dev_dbg(schan->dev, "descriptor %p #%d completed.\n",
- tx, tx->cookie);
-
- if (((desc->mark == DESC_COMPLETED ||
- desc->mark == DESC_WAITING) &&
- async_tx_test_ack(&desc->async_tx)) || all) {
-
- if (all || !desc->cyclic) {
- /* Remove from ld_queue list */
- desc->mark = DESC_IDLE;
- list_move(&desc->node, &schan->ld_free);
- } else {
- /* reuse as cyclic */
- desc->mark = DESC_SUBMITTED;
- list_move_tail(&desc->node, &cyclic_list);
- }
-
- if (list_empty(&schan->ld_queue)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- } else if (schan->pm_state == SHDMA_PM_PENDING) {
- shdma_chan_xfer_ld_queue(schan);
- }
- }
- }
-
- if (all && !callback)
- /*
- * Terminating and the loop completed normally: forgive
- * uncompleted cookies
- */
- schan->dma_chan.completed_cookie = schan->dma_chan.cookie;
-
- list_splice_tail(&cyclic_list, &schan->ld_queue);
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- dmaengine_desc_callback_invoke(&cb, NULL);
-
- return callback;
-}
-
-/*
- * shdma_chan_ld_cleanup - Clean up link descriptors
- *
- * Clean up the ld_queue of DMA channel.
- */
-static void shdma_chan_ld_cleanup(struct shdma_chan *schan, bool all)
-{
- while (__ld_cleanup(schan, all))
- ;
-}
-
-/*
- * shdma_free_chan_resources - Free all resources of the channel.
- */
-static void shdma_free_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- LIST_HEAD(list);
-
- /* Protect against ISR */
- spin_lock_irq(&schan->chan_lock);
- ops->halt_channel(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- /* Now no new interrupts will occur */
-
- /* Prepared and not submitted descriptors can still be on the queue */
- if (!list_empty(&schan->ld_queue))
- shdma_chan_ld_cleanup(schan, true);
-
- if (schan->slave_id >= 0) {
- /* The caller is holding dma_list_mutex */
- clear_bit(schan->slave_id, shdma_slave_used);
- chan->private = NULL;
- }
-
- schan->real_slave_id = 0;
-
- spin_lock_irq(&schan->chan_lock);
-
- list_splice_init(&schan->ld_free, &list);
- schan->desc_num = 0;
-
- spin_unlock_irq(&schan->chan_lock);
-
- kfree(schan->desc);
-}
-
-/**
- * shdma_add_desc - get, set up and return one transfer descriptor
- * @schan: DMA channel
- * @flags: DMA transfer flags
- * @dst: destination DMA address, incremented when direction equals
- * DMA_DEV_TO_MEM or DMA_MEM_TO_MEM
- * @src: source DMA address, incremented when direction equals
- * DMA_MEM_TO_DEV or DMA_MEM_TO_MEM
- * @len: DMA transfer length
- * @first: if NULL, set to the current descriptor and cookie set to -EBUSY
- * @direction: needed for slave DMA to decide which address to keep constant,
- * equals DMA_MEM_TO_MEM for MEMCPY
- * Returns 0 or an error
- * Locks: called with desc_lock held
- */
-static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan,
- unsigned long flags, dma_addr_t *dst, dma_addr_t *src, size_t *len,
- struct shdma_desc **first, enum dma_transfer_direction direction)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *new;
- size_t copy_size = *len;
-
- if (!copy_size)
- return NULL;
-
- /* Allocate the link descriptor from the free list */
- new = shdma_get_desc(schan);
- if (!new) {
- dev_err(schan->dev, "No free link descriptor available\n");
- return NULL;
- }
-
- ops->desc_setup(schan, new, *src, *dst, ©_size);
-
- if (!*first) {
- /* First desc */
- new->async_tx.cookie = -EBUSY;
- *first = new;
- } else {
- /* Other desc - invisible to the user */
- new->async_tx.cookie = -EINVAL;
- }
-
- dev_dbg(schan->dev,
- "chaining (%zu/%zu)@%pad -> %pad with %p, cookie %d\n",
- copy_size, *len, src, dst, &new->async_tx,
- new->async_tx.cookie);
-
- new->mark = DESC_PREPARED;
- new->async_tx.flags = flags;
- new->direction = direction;
- new->partial = 0;
-
- *len -= copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV)
- *src += copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_DEV_TO_MEM)
- *dst += copy_size;
-
- return new;
-}
-
-/*
- * shdma_prep_sg - prepare transfer descriptors from an SG list
- *
- * Common routine for public (MEMCPY) and slave DMA. The MEMCPY case is also
- * converted to scatter-gather to guarantee consistent locking and a correct
- * list manipulation. For slave DMA direction carries the usual meaning, and,
- * logically, the SG list is RAM and the addr variable contains slave address,
- * e.g., the FIFO I/O register. For MEMCPY direction equals DMA_MEM_TO_MEM
- * and the SG list contains only one element and points at the source buffer.
- */
-static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan,
- struct scatterlist *sgl, unsigned int sg_len, dma_addr_t *addr,
- enum dma_transfer_direction direction, unsigned long flags, bool cyclic)
-{
- struct scatterlist *sg;
- struct shdma_desc *first = NULL, *new = NULL /* compiler... */;
- LIST_HEAD(tx_list);
- int chunks = 0;
- unsigned long irq_flags;
- int i;
-
- for_each_sg(sgl, sg, sg_len, i)
- chunks += DIV_ROUND_UP(sg_dma_len(sg), schan->max_xfer_len);
-
- /* Have to lock the whole loop to protect against concurrent release */
- spin_lock_irqsave(&schan->chan_lock, irq_flags);
-
- /*
- * Chaining:
- * first descriptor is what user is dealing with in all API calls, its
- * cookie is at first set to -EBUSY, at tx-submit to a positive
- * number
- * if more than one chunk is needed further chunks have cookie = -EINVAL
- * the last chunk, if not equal to the first, has cookie = -ENOSPC
- * all chunks are linked onto the tx_list head with their .node heads
- * only during this function, then they are immediately spliced
- * back onto the free list in form of a chain
- */
- for_each_sg(sgl, sg, sg_len, i) {
- dma_addr_t sg_addr = sg_dma_address(sg);
- size_t len = sg_dma_len(sg);
-
- if (!len)
- goto err_get_desc;
-
- do {
- dev_dbg(schan->dev, "Add SG #%d@%p[%zu], dma %pad\n",
- i, sg, len, &sg_addr);
-
- if (direction == DMA_DEV_TO_MEM)
- new = shdma_add_desc(schan, flags,
- &sg_addr, addr, &len, &first,
- direction);
- else
- new = shdma_add_desc(schan, flags,
- addr, &sg_addr, &len, &first,
- direction);
- if (!new)
- goto err_get_desc;
-
- new->cyclic = cyclic;
- if (cyclic)
- new->chunks = 1;
- else
- new->chunks = chunks--;
- list_add_tail(&new->node, &tx_list);
- } while (len);
- }
-
- if (new != first)
- new->async_tx.cookie = -ENOSPC;
-
- /* Put them back on the free list, so, they don't get lost */
- list_splice_tail(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return &first->async_tx;
-
-err_get_desc:
- list_for_each_entry(new, &tx_list, node)
- new->mark = DESC_IDLE;
- list_splice(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return NULL;
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_memcpy(
- struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
- size_t len, unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct scatterlist sg;
-
- if (!chan || !len)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_src)), len,
- offset_in_page(dma_src));
- sg_dma_address(&sg) = dma_src;
- sg_dma_len(&sg) = len;
-
- return shdma_prep_sg(schan, &sg, 1, &dma_dest, DMA_MEM_TO_MEM,
- flags, false);
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_slave_sg(
- struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
- enum dma_transfer_direction direction, unsigned long flags, void *context)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || !sg_len) {
- dev_warn(schan->dev, "%s: bad parameter: len=%d, id=%d\n",
- __func__, sg_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- return shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, false);
-}
-
-#define SHDMA_MAX_SG_LEN 32
-
-static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
- struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
- size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- struct dma_async_tx_descriptor *desc;
- const struct shdma_ops *ops = sdev->ops;
- unsigned int sg_len = buf_len / period_len;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
- struct scatterlist *sgl;
- int i;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- if (sg_len > SHDMA_MAX_SG_LEN) {
- dev_err(schan->dev, "sg length %d exceeds limit %d",
- sg_len, SHDMA_MAX_SG_LEN);
- return NULL;
- }
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || (buf_len < period_len)) {
- dev_warn(schan->dev,
- "%s: bad parameter: buf_len=%zu, period_len=%zu, id=%d\n",
- __func__, buf_len, period_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- /*
- * Allocate the sg list dynamically as it would consumer too much stack
- * space.
- */
- sgl = kmalloc_array(sg_len, sizeof(*sgl), GFP_KERNEL);
- if (!sgl)
- return NULL;
-
- sg_init_table(sgl, sg_len);
-
- for (i = 0; i < sg_len; i++) {
- dma_addr_t src = buf_addr + (period_len * i);
-
- sg_set_page(&sgl[i], pfn_to_page(PFN_DOWN(src)), period_len,
- offset_in_page(src));
- sg_dma_address(&sgl[i]) = src;
- sg_dma_len(&sgl[i]) = period_len;
- }
-
- desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, true);
-
- kfree(sgl);
- return desc;
-}
-
-static int shdma_terminate_all(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- unsigned long flags;
-
- spin_lock_irqsave(&schan->chan_lock, flags);
- ops->halt_channel(schan);
-
- if (ops->get_partial && !list_empty(&schan->ld_queue)) {
- /* Record partial transfer */
- struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
- struct shdma_desc, node);
- desc->partial = ops->get_partial(schan, desc);
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- shdma_chan_ld_cleanup(schan, true);
-
- return 0;
-}
-
-static int shdma_config(struct dma_chan *chan,
- struct dma_slave_config *config)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- /*
- * So far only .slave_id is used, but the slave drivers are
- * encouraged to also set a transfer direction and an address.
- */
- if (!config)
- return -EINVAL;
-
- /*
- * We could lock this, but you shouldn't be configuring the
- * channel, while using it...
- */
- return shdma_setup_slave(schan,
- config->direction == DMA_DEV_TO_MEM ?
- config->src_addr : config->dst_addr);
-}
-
-static void shdma_issue_pending(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- spin_lock_irq(&schan->chan_lock);
- if (schan->pm_state == SHDMA_PM_ESTABLISHED)
- shdma_chan_xfer_ld_queue(schan);
- else
- schan->pm_state = SHDMA_PM_PENDING;
- spin_unlock_irq(&schan->chan_lock);
-}
-
-static enum dma_status shdma_tx_status(struct dma_chan *chan,
- dma_cookie_t cookie,
- struct dma_tx_state *txstate)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- enum dma_status status;
- unsigned long flags;
-
- shdma_chan_ld_cleanup(schan, false);
-
- spin_lock_irqsave(&schan->chan_lock, flags);
-
- status = dma_cookie_status(chan, cookie, txstate);
-
- /*
- * If we don't find cookie on the queue, it has been aborted and we have
- * to report error
- */
- if (status != DMA_COMPLETE) {
- struct shdma_desc *sdesc;
- status = DMA_ERROR;
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->cookie == cookie) {
- status = DMA_IN_PROGRESS;
- break;
- }
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- return status;
-}
-
-/* Called from error IRQ or NMI */
-bool shdma_reset(struct shdma_dev *sdev)
-{
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_chan *schan;
- unsigned int handled = 0;
- int i;
-
- /* Reset all channels */
- shdma_for_each_chan(schan, sdev, i) {
- struct shdma_desc *sdesc;
- LIST_HEAD(dl);
-
- if (!schan)
- continue;
-
- spin_lock(&schan->chan_lock);
-
- /* Stop the channel */
- ops->halt_channel(schan);
-
- list_splice_init(&schan->ld_queue, &dl);
-
- if (!list_empty(&dl)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- }
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- spin_unlock(&schan->chan_lock);
-
- /* Complete all */
- list_for_each_entry(sdesc, &dl, node) {
- struct dma_async_tx_descriptor *tx = &sdesc->async_tx;
-
- sdesc->mark = DESC_IDLE;
- dmaengine_desc_get_callback_invoke(tx, NULL);
- }
-
- spin_lock(&schan->chan_lock);
- list_splice(&dl, &schan->ld_free);
- spin_unlock(&schan->chan_lock);
-
- handled++;
- }
-
- return !!handled;
-}
-EXPORT_SYMBOL(shdma_reset);
-
-static irqreturn_t chan_irq(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- irqreturn_t ret;
-
- spin_lock(&schan->chan_lock);
-
- ret = ops->chan_irq(schan, irq) ? IRQ_WAKE_THREAD : IRQ_NONE;
-
- spin_unlock(&schan->chan_lock);
-
- return ret;
-}
-
-static irqreturn_t chan_irqt(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- struct shdma_desc *sdesc;
-
- spin_lock_irq(&schan->chan_lock);
- list_for_each_entry(sdesc, &schan->ld_queue, node) {
- if (sdesc->mark == DESC_SUBMITTED &&
- ops->desc_completed(schan, sdesc)) {
- dev_dbg(schan->dev, "done #%d@%p\n",
- sdesc->async_tx.cookie, &sdesc->async_tx);
- sdesc->mark = DESC_COMPLETED;
- break;
- }
- }
- /* Next desc */
- shdma_chan_xfer_ld_queue(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- shdma_chan_ld_cleanup(schan, false);
-
- return IRQ_HANDLED;
-}
-
-int shdma_request_irq(struct shdma_chan *schan, int irq,
- unsigned long flags, const char *name)
-{
- int ret = devm_request_threaded_irq(schan->dev, irq, chan_irq,
- chan_irqt, flags, name, schan);
-
- schan->irq = ret < 0 ? ret : irq;
-
- return ret;
-}
-EXPORT_SYMBOL(shdma_request_irq);
-
-void shdma_chan_probe(struct shdma_dev *sdev,
- struct shdma_chan *schan, int id)
-{
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- /* reference struct dma_device */
- schan->dma_chan.device = &sdev->dma_dev;
- dma_cookie_init(&schan->dma_chan);
-
- schan->dev = sdev->dma_dev.dev;
- schan->id = id;
-
- if (!schan->max_xfer_len)
- schan->max_xfer_len = PAGE_SIZE;
-
- spin_lock_init(&schan->chan_lock);
-
- /* Init descripter manage list */
- INIT_LIST_HEAD(&schan->ld_queue);
- INIT_LIST_HEAD(&schan->ld_free);
-
- /* Add the channel to DMA device channel list */
- list_add_tail(&schan->dma_chan.device_node,
- &sdev->dma_dev.channels);
- sdev->schan[id] = schan;
-}
-EXPORT_SYMBOL(shdma_chan_probe);
-
-void shdma_chan_remove(struct shdma_chan *schan)
-{
- list_del(&schan->dma_chan.device_node);
-}
-EXPORT_SYMBOL(shdma_chan_remove);
-
-int shdma_init(struct device *dev, struct shdma_dev *sdev,
- int chan_num)
-{
- struct dma_device *dma_dev = &sdev->dma_dev;
-
- /*
- * Require all call-backs for now, they can trivially be made optional
- * later as required
- */
- if (!sdev->ops ||
- !sdev->desc_size ||
- !sdev->ops->embedded_desc ||
- !sdev->ops->start_xfer ||
- !sdev->ops->setup_xfer ||
- !sdev->ops->set_slave ||
- !sdev->ops->desc_setup ||
- !sdev->ops->slave_addr ||
- !sdev->ops->channel_busy ||
- !sdev->ops->halt_channel ||
- !sdev->ops->desc_completed)
- return -EINVAL;
-
- sdev->schan = kcalloc(chan_num, sizeof(*sdev->schan), GFP_KERNEL);
- if (!sdev->schan)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&dma_dev->channels);
-
- /* Common and MEMCPY operations */
- dma_dev->device_alloc_chan_resources
- = shdma_alloc_chan_resources;
- dma_dev->device_free_chan_resources = shdma_free_chan_resources;
- dma_dev->device_prep_dma_memcpy = shdma_prep_memcpy;
- dma_dev->device_tx_status = shdma_tx_status;
- dma_dev->device_issue_pending = shdma_issue_pending;
-
- /* Compulsory for DMA_SLAVE fields */
- dma_dev->device_prep_slave_sg = shdma_prep_slave_sg;
- dma_dev->device_prep_dma_cyclic = shdma_prep_dma_cyclic;
- dma_dev->device_config = shdma_config;
- dma_dev->device_terminate_all = shdma_terminate_all;
-
- dma_dev->dev = dev;
-
- return 0;
-}
-EXPORT_SYMBOL(shdma_init);
-
-void shdma_cleanup(struct shdma_dev *sdev)
-{
- kfree(sdev->schan);
-}
-EXPORT_SYMBOL(shdma_cleanup);
-
-static int __init shdma_enter(void)
-{
- shdma_slave_used = bitmap_zalloc(slave_num, GFP_KERNEL);
- if (!shdma_slave_used)
- return -ENOMEM;
- return 0;
-}
-module_init(shdma_enter);
-
-static void __exit shdma_exit(void)
-{
- bitmap_free(shdma_slave_used);
-}
-module_exit(shdma_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH-DMA driver base library");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
deleted file mode 100644
index 9c121a4b33ad82..00000000000000
--- a/drivers/dma/sh/shdma.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Renesas SuperH DMA Engine support
- *
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- *
- */
-#ifndef __DMA_SHDMA_H
-#define __DMA_SHDMA_H
-
-#include <linux/sh_dma.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#define SH_DMAE_MAX_CHANNELS 20
-#define SH_DMAE_TCR_MAX 0x00FFFFFF /* 16MB */
-
-struct device;
-
-struct sh_dmae_chan {
- struct shdma_chan shdma_chan;
- const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
- int xmit_shift; /* log_2(bytes_per_xfer) */
- void __iomem *base;
- char dev_id[16]; /* unique name per DMAC of channel */
- int pm_error;
- dma_addr_t slave_addr;
-};
-
-struct sh_dmae_device {
- struct shdma_dev shdma_dev;
- struct sh_dmae_chan *chan[SH_DMAE_MAX_CHANNELS];
- const struct sh_dmae_pdata *pdata;
- struct list_head node;
- void __iomem *chan_reg;
- void __iomem *dmars;
- unsigned int chcr_offset;
- u32 chcr_ie_bit;
-};
-
-struct sh_dmae_regs {
- u32 sar; /* SAR / source address */
- u32 dar; /* DAR / destination address */
- u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_dmae_desc {
- struct sh_dmae_regs hw;
- struct shdma_desc shdma_desc;
-};
-
-#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, shdma_chan)
-#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
-#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
-#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
- struct sh_dmae_device, shdma_dev.dma_dev)
-
-#endif /* __DMA_SHDMA_H */
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
deleted file mode 100644
index 5aafe548ca5f30..00000000000000
--- a/drivers/dma/sh/shdmac.c
+++ /dev/null
@@ -1,938 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas SuperH DMA Engine support
- *
- * base is drivers/dma/flsdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * - DMA of SuperH does not have Hardware DMA chain mode.
- * - MAX DMA size is 16MB.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kdebug.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/rculist.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-#include "shdma.h"
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-#define TEND 0x18 /* USB-DMAC */
-
-#define SH_DMAE_DRV_NAME "sh-dma-engine"
-
-/* Default MEMCPY transfer size = 2^2 = 4 bytes */
-#define LOG2_DEFAULT_XFER_SIZE 2
-#define SH_DMA_SLAVE_NUMBER 256
-#define SH_DMA_TCR_MAX (16 * 1024 * 1024 - 1)
-
-/*
- * Used for write-side mutual exclusion for the global device list,
- * read-side synchronization by way of RCU, and per-controller data.
- */
-static DEFINE_SPINLOCK(sh_dmae_lock);
-static LIST_HEAD(sh_dmae_devices);
-
-/*
- * Different DMAC implementations provide different ways to clear DMA channels:
- * (1) none - no CHCLR registers are available
- * (2) one CHCLR register per channel - 0 has to be written to it to clear
- * channel buffers
- * (3) one CHCLR per several channels - 1 has to be written to the bit,
- * corresponding to the specific channel to reset it
- */
-static void channel_clear(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
- const struct sh_dmae_channel *chan_pdata = shdev->pdata->channel +
- sh_dc->shdma_chan.id;
- u32 val = shdev->pdata->chclr_bitwise ? 1 << chan_pdata->chclr_bit : 0;
-
- __raw_writel(val, shdev->chan_reg + chan_pdata->chclr_offset);
-}
-
-static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
-{
- __raw_writel(data, sh_dc->base + reg);
-}
-
-static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
-{
- return __raw_readl(sh_dc->base + reg);
-}
-
-static u16 dmaor_read(struct sh_dmae_device *shdev)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- return __raw_readl(addr);
- else
- return __raw_readw(addr);
-}
-
-static void dmaor_write(struct sh_dmae_device *shdev, u16 data)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- __raw_writel(data, addr);
- else
- __raw_writew(data, addr);
-}
-
-static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- __raw_writel(data, sh_dc->base + shdev->chcr_offset);
-}
-
-static u32 chcr_read(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- return __raw_readl(sh_dc->base + shdev->chcr_offset);
-}
-
-/*
- * Reset DMA controller
- *
- * SH7780 has two DMAOR register
- */
-static void sh_dmae_ctl_stop(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev);
- dmaor_write(shdev, dmaor & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME));
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-}
-
-static int sh_dmae_rst(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev) & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME);
-
- if (shdev->pdata->chclr_present) {
- int i;
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
- if (sh_chan)
- channel_clear(sh_chan);
- }
- }
-
- dmaor_write(shdev, dmaor | shdev->pdata->dmaor_init);
-
- dmaor = dmaor_read(shdev);
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-
- if (dmaor & (DMAOR_AE | DMAOR_NMIF)) {
- dev_warn(shdev->shdma_dev.dma_dev.dev, "Can't initialize DMAOR.\n");
- return -EIO;
- }
- if (shdev->pdata->dmaor_init & ~dmaor)
- dev_warn(shdev->shdma_dev.dma_dev.dev,
- "DMAOR=0x%x hasn't latched the initial value 0x%x.\n",
- dmaor, shdev->pdata->dmaor_init);
- return 0;
-}
-
-static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
-{
- u32 chcr = chcr_read(sh_chan);
-
- if ((chcr & (CHCR_DE | CHCR_TE)) == CHCR_DE)
- return true; /* working */
-
- return false; /* waiting */
-}
-
-static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) |
- ((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift);
-
- if (cnt >= pdata->ts_shift_num)
- cnt = 0;
-
- return pdata->ts_shift[cnt];
-}
-
-static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int i;
-
- for (i = 0; i < pdata->ts_shift_num; i++)
- if (pdata->ts_shift[i] == l2size)
- break;
-
- if (i == pdata->ts_shift_num)
- i = 0;
-
- return ((i << pdata->ts_low_shift) & pdata->ts_low_mask) |
- ((i << pdata->ts_high_shift) & pdata->ts_high_mask);
-}
-
-static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
-{
- sh_dmae_writel(sh_chan, hw->sar, SAR);
- sh_dmae_writel(sh_chan, hw->dar, DAR);
- sh_dmae_writel(sh_chan, hw->tcr >> sh_chan->xmit_shift, TCR);
-}
-
-static void dmae_start(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- if (shdev->pdata->needs_tend_set)
- sh_dmae_writel(sh_chan, 0xFFFFFFFF, TEND);
-
- chcr |= CHCR_DE | shdev->chcr_ie_bit;
- chcr_write(sh_chan, chcr & ~CHCR_TE);
-}
-
-static void dmae_init(struct sh_dmae_chan *sh_chan)
-{
- /*
- * Default configuration for dual address memory-memory transfer.
- */
- u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan,
- LOG2_DEFAULT_XFER_SIZE);
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
- chcr_write(sh_chan, chcr);
-}
-
-static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
-{
- /* If DMA is active, cannot set CHCR. TODO: remove this superfluous check */
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, val);
- chcr_write(sh_chan, val);
-
- return 0;
-}
-
-static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->shdma_chan.id];
- void __iomem *addr = shdev->dmars;
- unsigned int shift = chan_pdata->dmars_bit;
-
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- if (pdata->no_dmars)
- return 0;
-
- /* in the case of a missing DMARS resource use first memory window */
- if (!addr)
- addr = shdev->chan_reg;
- addr += chan_pdata->dmars;
-
- __raw_writew((__raw_readw(addr) & (0xff00 >> shift)) | (val << shift),
- addr);
-
- return 0;
-}
-
-static void sh_dmae_start_xfer(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- dev_dbg(sh_chan->shdma_chan.dev, "Queue #%d to %d: %u@%x -> %x\n",
- sdesc->async_tx.cookie, sh_chan->shdma_chan.id,
- sh_desc->hw.tcr, sh_desc->hw.sar, sh_desc->hw.dar);
- /* Get the ld start address from ld_queue */
- dmae_set_reg(sh_chan, &sh_desc->hw);
- dmae_start(sh_chan);
-}
-
-static bool sh_dmae_channel_busy(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- return dmae_is_busy(sh_chan);
-}
-
-static void sh_dmae_setup_xfer(struct shdma_chan *schan,
- int slave_id)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg =
- sh_chan->config;
-
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
-}
-
-/*
- * Find a slave channel configuration from the contoller list by either a slave
- * ID in the non-DT case, or by a MID/RID value in the DT case
- */
-static const struct sh_dmae_slave_config *dmae_find_slave(
- struct sh_dmae_chan *sh_chan, int match)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_slave_config *cfg;
- int i;
-
- if (!sh_chan->shdma_chan.dev->of_node) {
- if (match >= SH_DMA_SLAVE_NUMBER)
- return NULL;
-
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->slave_id == match)
- return cfg;
- } else {
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->mid_rid == match) {
- sh_chan->shdma_chan.slave_id = i;
- return cfg;
- }
- }
-
- return NULL;
-}
-
-static int sh_dmae_set_slave(struct shdma_chan *schan,
- int slave_id, dma_addr_t slave_addr, bool try)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- const struct sh_dmae_slave_config *cfg = dmae_find_slave(sh_chan, slave_id);
- if (!cfg)
- return -ENXIO;
-
- if (!try) {
- sh_chan->config = cfg;
- sh_chan->slave_addr = slave_addr ? : cfg->addr;
- }
-
- return 0;
-}
-
-static void dmae_halt(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- chcr &= ~(CHCR_DE | CHCR_TE | shdev->chcr_ie_bit);
- chcr_write(sh_chan, chcr);
-}
-
-static int sh_dmae_desc_setup(struct shdma_chan *schan,
- struct shdma_desc *sdesc,
- dma_addr_t src, dma_addr_t dst, size_t *len)
-{
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
-
- if (*len > schan->max_xfer_len)
- *len = schan->max_xfer_len;
-
- sh_desc->hw.sar = src;
- sh_desc->hw.dar = dst;
- sh_desc->hw.tcr = *len;
-
- return 0;
-}
-
-static void sh_dmae_halt(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- dmae_halt(sh_chan);
-}
-
-static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (!(chcr_read(sh_chan) & CHCR_TE))
- return false;
-
- /* DMA stop */
- dmae_halt(sh_chan);
-
- return true;
-}
-
-static size_t sh_dmae_get_partial(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- return sh_desc->hw.tcr -
- (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift);
-}
-
-/* Called from error IRQ or NMI */
-static bool sh_dmae_reset(struct sh_dmae_device *shdev)
-{
- bool ret;
-
- /* halt the dma controller */
- sh_dmae_ctl_stop(shdev);
-
- /* We cannot detect, which channel caused the error, have to reset all */
- ret = shdma_reset(&shdev->shdma_dev);
-
- sh_dmae_rst(shdev);
-
- return ret;
-}
-
-static irqreturn_t sh_dmae_err(int irq, void *data)
-{
- struct sh_dmae_device *shdev = data;
-
- if (!(dmaor_read(shdev) & DMAOR_AE))
- return IRQ_NONE;
-
- sh_dmae_reset(shdev);
- return IRQ_HANDLED;
-}
-
-static bool sh_dmae_desc_completed(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
- u32 dar_buf = sh_dmae_readl(sh_chan, DAR);
-
- return (sdesc->direction == DMA_DEV_TO_MEM &&
- (sh_desc->hw.dar + sh_desc->hw.tcr) == dar_buf) ||
- (sdesc->direction != DMA_DEV_TO_MEM &&
- (sh_desc->hw.sar + sh_desc->hw.tcr) == sar_buf);
-}
-
-static bool sh_dmae_nmi_notify(struct sh_dmae_device *shdev)
-{
- /* Fast path out if NMIF is not asserted for this controller */
- if ((dmaor_read(shdev) & DMAOR_NMIF) == 0)
- return false;
-
- return sh_dmae_reset(shdev);
-}
-
-static int sh_dmae_nmi_handler(struct notifier_block *self,
- unsigned long cmd, void *data)
-{
- struct sh_dmae_device *shdev;
- int ret = NOTIFY_DONE;
- bool triggered;
-
- /*
- * Only concern ourselves with NMI events.
- *
- * Normally we would check the die chain value, but as this needs
- * to be architecture independent, check for NMI context instead.
- */
- if (!in_nmi())
- return NOTIFY_DONE;
-
- rcu_read_lock();
- list_for_each_entry_rcu(shdev, &sh_dmae_devices, node) {
- /*
- * Only stop if one of the controllers has NMIF asserted,
- * we do not want to interfere with regular address error
- * handling or NMI events that don't concern the DMACs.
- */
- triggered = sh_dmae_nmi_notify(shdev);
- if (triggered == true)
- ret = NOTIFY_OK;
- }
- rcu_read_unlock();
-
- return ret;
-}
-
-static struct notifier_block sh_dmae_nmi_notifier __read_mostly = {
- .notifier_call = sh_dmae_nmi_handler,
-
- /* Run before NMI debug handler and KGDB */
- .priority = 1,
-};
-
-static int sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
- int irq, unsigned long flags)
-{
- const struct sh_dmae_channel *chan_pdata = &shdev->pdata->channel[id];
- struct shdma_dev *sdev = &shdev->shdma_dev;
- struct platform_device *pdev = to_platform_device(sdev->dma_dev.dev);
- struct sh_dmae_chan *sh_chan;
- struct shdma_chan *schan;
- int err;
-
- sh_chan = devm_kzalloc(sdev->dma_dev.dev, sizeof(struct sh_dmae_chan),
- GFP_KERNEL);
- if (!sh_chan)
- return -ENOMEM;
-
- schan = &sh_chan->shdma_chan;
- schan->max_xfer_len = SH_DMA_TCR_MAX + 1;
-
- shdma_chan_probe(sdev, schan, id);
-
- sh_chan->base = shdev->chan_reg + chan_pdata->offset;
-
- /* set up channel irq */
- if (pdev->id >= 0)
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dmae%d.%d", pdev->id, id);
- else
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dma%d", id);
-
- err = shdma_request_irq(schan, irq, flags, sh_chan->dev_id);
- if (err) {
- dev_err(sdev->dma_dev.dev,
- "DMA channel %d request_irq error %d\n",
- id, err);
- goto err_no_irq;
- }
-
- shdev->chan[id] = sh_chan;
- return 0;
-
-err_no_irq:
- /* remove from dmaengine device node */
- shdma_chan_remove(schan);
- return err;
-}
-
-static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
-{
- struct shdma_chan *schan;
- int i;
-
- shdma_for_each_chan(schan, &shdev->shdma_dev, i) {
- BUG_ON(!schan);
-
- shdma_chan_remove(schan);
- }
-}
-
-#ifdef CONFIG_PM
-static int sh_dmae_runtime_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_runtime_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- return sh_dmae_rst(shdev);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int sh_dmae_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
- int i, ret;
-
- ret = sh_dmae_rst(shdev);
- if (ret < 0)
- dev_err(dev, "Failed to reset!\n");
-
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
-
- if (!sh_chan->shdma_chan.desc_num)
- continue;
-
- if (sh_chan->shdma_chan.slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg = sh_chan->config;
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
- }
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops sh_dmae_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(sh_dmae_suspend, sh_dmae_resume)
- SET_RUNTIME_PM_OPS(sh_dmae_runtime_suspend, sh_dmae_runtime_resume,
- NULL)
-};
-
-static dma_addr_t sh_dmae_slave_addr(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
-
- /*
- * Implicit BUG_ON(!sh_chan->config)
- * This is an exclusive slave DMA operation, may only be called after a
- * successful slave configuration.
- */
- return sh_chan->slave_addr;
-}
-
-static struct shdma_desc *sh_dmae_embedded_desc(void *buf, int i)
-{
- return &((struct sh_dmae_desc *)buf)[i].shdma_desc;
-}
-
-static const struct shdma_ops sh_dmae_shdma_ops = {
- .desc_completed = sh_dmae_desc_completed,
- .halt_channel = sh_dmae_halt,
- .channel_busy = sh_dmae_channel_busy,
- .slave_addr = sh_dmae_slave_addr,
- .desc_setup = sh_dmae_desc_setup,
- .set_slave = sh_dmae_set_slave,
- .setup_xfer = sh_dmae_setup_xfer,
- .start_xfer = sh_dmae_start_xfer,
- .embedded_desc = sh_dmae_embedded_desc,
- .chan_irq = sh_dmae_chan_irq,
- .get_partial = sh_dmae_get_partial,
-};
-
-static int sh_dmae_probe(struct platform_device *pdev)
-{
- const enum dma_slave_buswidth widths =
- DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
- DMA_SLAVE_BUSWIDTH_4_BYTES | DMA_SLAVE_BUSWIDTH_8_BYTES |
- DMA_SLAVE_BUSWIDTH_16_BYTES | DMA_SLAVE_BUSWIDTH_32_BYTES;
- const struct sh_dmae_pdata *pdata;
- unsigned long chan_flag[SH_DMAE_MAX_CHANNELS] = {};
- int chan_irq[SH_DMAE_MAX_CHANNELS];
- unsigned long irqflags = 0;
- int err, errirq, i, irq_cnt = 0, irqres = 0, irq_cap = 0;
- struct sh_dmae_device *shdev;
- struct dma_device *dma_dev;
- struct resource *chan, *dmars, *errirq_res, *chanirq_res;
-
- if (pdev->dev.of_node)
- pdata = of_device_get_match_data(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- /* get platform data */
- if (!pdata || !pdata->channel_num)
- return -ENODEV;
-
- chan = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- /* DMARS area is optional */
- dmars = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- /*
- * IRQ resources:
- * 1. there always must be at least one IRQ IO-resource. On SH4 it is
- * the error IRQ, in which case it is the only IRQ in this resource:
- * start == end. If it is the only IRQ resource, all channels also
- * use the same IRQ.
- * 2. DMA channel IRQ resources can be specified one per resource or in
- * ranges (start != end)
- * 3. iff all events (channels and, optionally, error) on this
- * controller use the same IRQ, only one IRQ resource can be
- * specified, otherwise there must be one IRQ per channel, even if
- * some of them are equal
- * 4. if all IRQs on this controller are equal or if some specific IRQs
- * specify IORESOURCE_IRQ_SHAREABLE in their resources, they will be
- * requested with the IRQF_SHARED flag
- */
- errirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!chan || !errirq_res)
- return -ENODEV;
-
- shdev = devm_kzalloc(&pdev->dev, sizeof(struct sh_dmae_device),
- GFP_KERNEL);
- if (!shdev)
- return -ENOMEM;
-
- dma_dev = &shdev->shdma_dev.dma_dev;
-
- shdev->chan_reg = devm_ioremap_resource(&pdev->dev, chan);
- if (IS_ERR(shdev->chan_reg))
- return PTR_ERR(shdev->chan_reg);
- if (dmars) {
- shdev->dmars = devm_ioremap_resource(&pdev->dev, dmars);
- if (IS_ERR(shdev->dmars))
- return PTR_ERR(shdev->dmars);
- }
-
- dma_dev->src_addr_widths = widths;
- dma_dev->dst_addr_widths = widths;
- dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
- dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-
- if (!pdata->slave_only)
- dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
- if (pdata->slave && pdata->slave_num)
- dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
-
- /* Default transfer size of 32 bytes requires 32-byte alignment */
- dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE;
-
- shdev->shdma_dev.ops = &sh_dmae_shdma_ops;
- shdev->shdma_dev.desc_size = sizeof(struct sh_dmae_desc);
- err = shdma_init(&pdev->dev, &shdev->shdma_dev,
- pdata->channel_num);
- if (err < 0)
- goto eshdma;
-
- /* platform data */
- shdev->pdata = pdata;
-
- if (pdata->chcr_offset)
- shdev->chcr_offset = pdata->chcr_offset;
- else
- shdev->chcr_offset = CHCR;
-
- if (pdata->chcr_ie_bit)
- shdev->chcr_ie_bit = pdata->chcr_ie_bit;
- else
- shdev->chcr_ie_bit = CHCR_IE;
-
- platform_set_drvdata(pdev, shdev);
-
- pm_runtime_enable(&pdev->dev);
- err = pm_runtime_get_sync(&pdev->dev);
- if (err < 0)
- dev_err(&pdev->dev, "%s(): GET = %d\n", __func__, err);
-
- spin_lock_irq(&sh_dmae_lock);
- list_add_tail_rcu(&shdev->node, &sh_dmae_devices);
- spin_unlock_irq(&sh_dmae_lock);
-
- /* reset dma controller - only needed as a test */
- err = sh_dmae_rst(shdev);
- if (err)
- goto rst_err;
-
- if (IS_ENABLED(CONFIG_CPU_SH4) || IS_ENABLED(CONFIG_ARCH_RENESAS)) {
- chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-
- if (!chanirq_res)
- chanirq_res = errirq_res;
- else
- irqres++;
-
- if (chanirq_res == errirq_res ||
- (errirq_res->flags & IORESOURCE_BITS) == IORESOURCE_IRQ_SHAREABLE)
- irqflags = IRQF_SHARED;
-
- errirq = errirq_res->start;
-
- err = devm_request_irq(&pdev->dev, errirq, sh_dmae_err,
- irqflags, "DMAC Address Error", shdev);
- if (err) {
- dev_err(&pdev->dev,
- "DMA failed requesting irq #%d, error %d\n",
- errirq, err);
- goto eirq_err;
- }
- } else {
- chanirq_res = errirq_res;
- }
-
- if (chanirq_res->start == chanirq_res->end &&
- !platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
- /* Special case - all multiplexed */
- for (; irq_cnt < pdata->channel_num; irq_cnt++) {
- if (irq_cnt < SH_DMAE_MAX_CHANNELS) {
- chan_irq[irq_cnt] = chanirq_res->start;
- chan_flag[irq_cnt] = IRQF_SHARED;
- } else {
- irq_cap = 1;
- break;
- }
- }
- } else {
- do {
- for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS) {
- irq_cap = 1;
- break;
- }
-
- if ((errirq_res->flags & IORESOURCE_BITS) ==
- IORESOURCE_IRQ_SHAREABLE)
- chan_flag[irq_cnt] = IRQF_SHARED;
- else
- chan_flag[irq_cnt] = 0;
- dev_dbg(&pdev->dev,
- "Found IRQ %d for channel %d\n",
- i, irq_cnt);
- chan_irq[irq_cnt++] = i;
- }
-
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS)
- break;
-
- chanirq_res = platform_get_resource(pdev,
- IORESOURCE_IRQ, ++irqres);
- } while (irq_cnt < pdata->channel_num && chanirq_res);
- }
-
- /* Create DMA Channel */
- for (i = 0; i < irq_cnt; i++) {
- err = sh_dmae_chan_probe(shdev, i, chan_irq[i], chan_flag[i]);
- if (err)
- goto chan_probe_err;
- }
-
- if (irq_cap)
- dev_notice(&pdev->dev, "Attempting to register %d DMA "
- "channels when a maximum of %d are supported.\n",
- pdata->channel_num, SH_DMAE_MAX_CHANNELS);
-
- pm_runtime_put(&pdev->dev);
-
- err = dma_async_device_register(&shdev->shdma_dev.dma_dev);
- if (err < 0)
- goto edmadevreg;
-
- return err;
-
-edmadevreg:
- pm_runtime_get(&pdev->dev);
-
-chan_probe_err:
- sh_dmae_chan_remove(shdev);
-
-eirq_err:
-rst_err:
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- shdma_cleanup(&shdev->shdma_dev);
-eshdma:
- synchronize_rcu();
-
- return err;
-}
-
-static int sh_dmae_remove(struct platform_device *pdev)
-{
- struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
- struct dma_device *dma_dev = &shdev->shdma_dev.dma_dev;
-
- dma_async_device_unregister(dma_dev);
-
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_disable(&pdev->dev);
-
- sh_dmae_chan_remove(shdev);
- shdma_cleanup(&shdev->shdma_dev);
-
- synchronize_rcu();
-
- return 0;
-}
-
-static struct platform_driver sh_dmae_driver = {
- .driver = {
- .pm = &sh_dmae_pm,
- .name = SH_DMAE_DRV_NAME,
- },
- .remove = sh_dmae_remove,
-};
-
-static int __init sh_dmae_init(void)
-{
- /* Wire up NMI handling */
- int err = register_die_notifier(&sh_dmae_nmi_notifier);
- if (err)
- return err;
-
- return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
-}
-module_init(sh_dmae_init);
-
-static void __exit sh_dmae_exit(void)
-{
- platform_driver_unregister(&sh_dmae_driver);
-
- unregister_die_notifier(&sh_dmae_nmi_notifier);
-}
-module_exit(sh_dmae_exit);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
-MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" SH_DMAE_DRV_NAME);
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index 6dfd05ef5c2d9f..dd32aba344757f 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -122,13 +122,9 @@ void shdma_chan_remove(struct shdma_chan *schan);
int shdma_init(struct device *dev, struct shdma_dev *sdev,
int chan_num);
void shdma_cleanup(struct shdma_dev *sdev);
-#if IS_ENABLED(CONFIG_SH_DMAE_BASE)
-bool shdma_chan_filter(struct dma_chan *chan, void *arg);
-#else
static inline bool shdma_chan_filter(struct dma_chan *chan, void *arg)
{
return false;
}
-#endif
#endif
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 08/22] dmaengine: remove the shdmac driver
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/dma/sh/Kconfig | 20 -
drivers/dma/sh/Makefile | 13 -
drivers/dma/sh/shdma-base.c | 1052 -----------------------------------
drivers/dma/sh/shdma.h | 61 --
drivers/dma/sh/shdmac.c | 938 -------------------------------
include/linux/shdma-base.h | 4 -
6 files changed, 2088 deletions(-)
delete mode 100644 drivers/dma/sh/shdma-base.c
delete mode 100644 drivers/dma/sh/shdma.h
delete mode 100644 drivers/dma/sh/shdmac.c
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index c0b2997ab7fd93..744d4d8ff5353b 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -7,30 +7,10 @@ config RENESAS_DMA
bool
select DMA_ENGINE
-#
-# DMA Engine Helpers
-#
-
-config SH_DMAE_BASE
- bool "Renesas SuperH DMA Engine support"
- depends on SUPERH || COMPILE_TEST
- depends on !SUPERH || SH_DMA
- depends on !SH_DMA_API
- default y
- select RENESAS_DMA
- help
- Enable support for the Renesas SuperH DMA controllers.
-
#
# DMA Controllers
#
-config SH_DMAE
- tristate "Renesas SuperH DMAC support"
- depends on SH_DMAE_BASE
- help
- Enable support for the Renesas SuperH DMA controllers.
-
config RCAR_DMAC
tristate "Renesas R-Car Gen{2,3} and RZ/G{1,2} DMA Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index 360ab6d25e769d..07178651aa7279 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -1,17 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-#
-# DMA Engine Helpers
-#
-
-obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o
-
-#
-# DMA Controllers
-#
-
-shdma-y := shdmac.o
-shdma-objs := $(shdma-y)
-obj-$(CONFIG_SH_DMAE) += shdma.o
obj-$(CONFIG_RCAR_DMAC) += rcar-dmac.o
obj-$(CONFIG_RENESAS_USB_DMAC) += usb-dmac.o
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
deleted file mode 100644
index 158e5e7defaeb0..00000000000000
--- a/drivers/dma/sh/shdma-base.c
+++ /dev/null
@@ -1,1052 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dmaengine driver base library for DMA controllers, found on SH-based SoCs
- *
- * extracted from shdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- */
-
-#include <linux/delay.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-
-/* DMA descriptor control */
-enum shdma_desc_status {
- DESC_IDLE,
- DESC_PREPARED,
- DESC_SUBMITTED,
- DESC_COMPLETED, /* completed, have to call callback */
- DESC_WAITING, /* callback called, waiting for ack / re-submit */
-};
-
-#define NR_DESCS_PER_CHANNEL 32
-
-#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan)
-#define to_shdma_dev(d) container_of(d, struct shdma_dev, dma_dev)
-
-/*
- * For slave DMA we assume, that there is a finite number of DMA slaves in the
- * system, and that each such slave can only use a finite number of channels.
- * We use slave channel IDs to make sure, that no such slave channel ID is
- * allocated more than once.
- */
-static unsigned int slave_num = 256;
-module_param(slave_num, uint, 0444);
-
-/* A bitmask with slave_num bits */
-static unsigned long *shdma_slave_used;
-
-/* Called under spin_lock_irq(&schan->chan_lock") */
-static void shdma_chan_xfer_ld_queue(struct shdma_chan *schan)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *sdesc;
-
- /* DMA work check */
- if (ops->channel_busy(schan))
- return;
-
- /* Find the first not transferred descriptor */
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->mark == DESC_SUBMITTED) {
- ops->start_xfer(schan, sdesc);
- break;
- }
-}
-
-static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct shdma_desc *chunk, *c, *desc =
- container_of(tx, struct shdma_desc, async_tx);
- struct shdma_chan *schan = to_shdma_chan(tx->chan);
- dma_async_tx_callback callback = tx->callback;
- dma_cookie_t cookie;
- bool power_up;
-
- spin_lock_irq(&schan->chan_lock);
-
- power_up = list_empty(&schan->ld_queue);
-
- cookie = dma_cookie_assign(tx);
-
- /* Mark all chunks of this descriptor as submitted, move to the queue */
- list_for_each_entry_safe(chunk, c, desc->node.prev, node) {
- /*
- * All chunks are on the global ld_free, so, we have to find
- * the end of the chain ourselves
- */
- if (chunk != desc && (chunk->mark == DESC_IDLE ||
- chunk->async_tx.cookie > 0 ||
- chunk->async_tx.cookie == -EBUSY ||
- &chunk->node == &schan->ld_free))
- break;
- chunk->mark = DESC_SUBMITTED;
- if (chunk->chunks == 1) {
- chunk->async_tx.callback = callback;
- chunk->async_tx.callback_param = tx->callback_param;
- } else {
- /* Callback goes to the last chunk */
- chunk->async_tx.callback = NULL;
- }
- chunk->cookie = cookie;
- list_move_tail(&chunk->node, &schan->ld_queue);
-
- dev_dbg(schan->dev, "submit #%d@%p on %d\n",
- tx->cookie, &chunk->async_tx, schan->id);
- }
-
- if (power_up) {
- int ret;
- schan->pm_state = SHDMA_PM_BUSY;
-
- ret = pm_runtime_get(schan->dev);
-
- spin_unlock_irq(&schan->chan_lock);
- if (ret < 0)
- dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
-
- pm_runtime_barrier(schan->dev);
-
- spin_lock_irq(&schan->chan_lock);
-
- /* Have we been reset, while waiting? */
- if (schan->pm_state != SHDMA_PM_ESTABLISHED) {
- struct shdma_dev *sdev =
- to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- dev_dbg(schan->dev, "Bring up channel %d\n",
- schan->id);
- /*
- * TODO: .xfer_setup() might fail on some platforms.
- * Make it int then, on error remove chunks from the
- * queue again
- */
- ops->setup_xfer(schan, schan->slave_id);
-
- if (schan->pm_state == SHDMA_PM_PENDING)
- shdma_chan_xfer_ld_queue(schan);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- }
- } else {
- /*
- * Tell .device_issue_pending() not to run the queue, interrupts
- * will do it anyway
- */
- schan->pm_state = SHDMA_PM_PENDING;
- }
-
- spin_unlock_irq(&schan->chan_lock);
-
- return cookie;
-}
-
-/* Called with desc_lock held */
-static struct shdma_desc *shdma_get_desc(struct shdma_chan *schan)
-{
- struct shdma_desc *sdesc;
-
- list_for_each_entry(sdesc, &schan->ld_free, node)
- if (sdesc->mark != DESC_PREPARED) {
- BUG_ON(sdesc->mark != DESC_IDLE);
- list_del(&sdesc->node);
- return sdesc;
- }
-
- return NULL;
-}
-
-static int shdma_setup_slave(struct shdma_chan *schan, dma_addr_t slave_addr)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int ret, match;
-
- if (schan->dev->of_node) {
- match = schan->hw_req;
- ret = ops->set_slave(schan, match, slave_addr, true);
- if (ret < 0)
- return ret;
- } else {
- match = schan->real_slave_id;
- }
-
- if (schan->real_slave_id < 0 || schan->real_slave_id >= slave_num)
- return -EINVAL;
-
- if (test_and_set_bit(schan->real_slave_id, shdma_slave_used))
- return -EBUSY;
-
- ret = ops->set_slave(schan, match, slave_addr, false);
- if (ret < 0) {
- clear_bit(schan->real_slave_id, shdma_slave_used);
- return ret;
- }
-
- schan->slave_id = schan->real_slave_id;
-
- return 0;
-}
-
-static int shdma_alloc_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *desc;
- struct shdma_slave *slave = chan->private;
- int ret, i;
-
- /*
- * This relies on the guarantee from dmaengine that alloc_chan_resources
- * never runs concurrently with itself or free_chan_resources.
- */
- if (slave) {
- /* Legacy mode: .private is set in filter */
- schan->real_slave_id = slave->slave_id;
- ret = shdma_setup_slave(schan, 0);
- if (ret < 0)
- goto esetslave;
- } else {
- /* Normal mode: real_slave_id was set by filter */
- schan->slave_id = -EINVAL;
- }
-
- schan->desc = kcalloc(NR_DESCS_PER_CHANNEL,
- sdev->desc_size, GFP_KERNEL);
- if (!schan->desc) {
- ret = -ENOMEM;
- goto edescalloc;
- }
- schan->desc_num = NR_DESCS_PER_CHANNEL;
-
- for (i = 0; i < NR_DESCS_PER_CHANNEL; i++) {
- desc = ops->embedded_desc(schan->desc, i);
- dma_async_tx_descriptor_init(&desc->async_tx,
- &schan->dma_chan);
- desc->async_tx.tx_submit = shdma_tx_submit;
- desc->mark = DESC_IDLE;
-
- list_add(&desc->node, &schan->ld_free);
- }
-
- return NR_DESCS_PER_CHANNEL;
-
-edescalloc:
- if (slave)
-esetslave:
- clear_bit(slave->slave_id, shdma_slave_used);
- chan->private = NULL;
- return ret;
-}
-
-/*
- * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer.
- * You always have to pass a valid slave id as the argument, old drivers that
- * pass ERR_PTR(-EINVAL) as a filter parameter and set it up in dma_slave_config
- * need to be updated so we can remove the slave_id field from dma_slave_config.
- * parameter. If this filter is used, the slave driver, after calling
- * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .direction, and either .src_addr or .dst_addr set.
- *
- * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
- * capability! If this becomes a requirement, hardware glue drivers, using this
- * services would have to provide their own filters, which first would check
- * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
- * this, and only then, in case of a match, call this common filter.
- * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
- * In that case the MID-RID value is used for slave channel filtering and is
- * passed to this function in the "arg" parameter.
- */
-bool shdma_chan_filter(struct dma_chan *chan, void *arg)
-{
- struct shdma_chan *schan;
- struct shdma_dev *sdev;
- int slave_id = (long)arg;
- int ret;
-
- /* Only support channels handled by this driver. */
- if (chan->device->device_alloc_chan_resources !=
- shdma_alloc_chan_resources)
- return false;
-
- schan = to_shdma_chan(chan);
- sdev = to_shdma_dev(chan->device);
-
- /*
- * For DT, the schan->slave_id field is generated by the
- * set_slave function from the slave ID that is passed in
- * from xlate. For the non-DT case, the slave ID is
- * directly passed into the filter function by the driver
- */
- if (schan->dev->of_node) {
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = schan->slave_id;
- return true;
- }
-
- if (slave_id < 0) {
- /* No slave requested - arbitrary channel */
- dev_warn(sdev->dma_dev.dev, "invalid slave ID passed to dma_request_slave\n");
- return true;
- }
-
- if (slave_id >= slave_num)
- return false;
-
- ret = sdev->ops->set_slave(schan, slave_id, 0, true);
- if (ret < 0)
- return false;
-
- schan->real_slave_id = slave_id;
-
- return true;
-}
-EXPORT_SYMBOL(shdma_chan_filter);
-
-static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
-{
- struct shdma_desc *desc, *_desc;
- /* Is the "exposed" head of a chain acked? */
- bool head_acked = false;
- dma_cookie_t cookie = 0;
- dma_async_tx_callback callback = NULL;
- struct dmaengine_desc_callback cb;
- unsigned long flags;
- LIST_HEAD(cyclic_list);
-
- memset(&cb, 0, sizeof(cb));
- spin_lock_irqsave(&schan->chan_lock, flags);
- list_for_each_entry_safe(desc, _desc, &schan->ld_queue, node) {
- struct dma_async_tx_descriptor *tx = &desc->async_tx;
-
- BUG_ON(tx->cookie > 0 && tx->cookie != desc->cookie);
- BUG_ON(desc->mark != DESC_SUBMITTED &&
- desc->mark != DESC_COMPLETED &&
- desc->mark != DESC_WAITING);
-
- /*
- * queue is ordered, and we use this loop to (1) clean up all
- * completed descriptors, and to (2) update descriptor flags of
- * any chunks in a (partially) completed chain
- */
- if (!all && desc->mark == DESC_SUBMITTED &&
- desc->cookie != cookie)
- break;
-
- if (tx->cookie > 0)
- cookie = tx->cookie;
-
- if (desc->mark == DESC_COMPLETED && desc->chunks == 1) {
- if (schan->dma_chan.completed_cookie != desc->cookie - 1)
- dev_dbg(schan->dev,
- "Completing cookie %d, expected %d\n",
- desc->cookie,
- schan->dma_chan.completed_cookie + 1);
- schan->dma_chan.completed_cookie = desc->cookie;
- }
-
- /* Call callback on the last chunk */
- if (desc->mark == DESC_COMPLETED && tx->callback) {
- desc->mark = DESC_WAITING;
- dmaengine_desc_get_callback(tx, &cb);
- callback = tx->callback;
- dev_dbg(schan->dev, "descriptor #%d@%p on %d callback\n",
- tx->cookie, tx, schan->id);
- BUG_ON(desc->chunks != 1);
- break;
- }
-
- if (tx->cookie > 0 || tx->cookie == -EBUSY) {
- if (desc->mark == DESC_COMPLETED) {
- BUG_ON(tx->cookie < 0);
- desc->mark = DESC_WAITING;
- }
- head_acked = async_tx_test_ack(tx);
- } else {
- switch (desc->mark) {
- case DESC_COMPLETED:
- desc->mark = DESC_WAITING;
- fallthrough;
- case DESC_WAITING:
- if (head_acked)
- async_tx_ack(&desc->async_tx);
- }
- }
-
- dev_dbg(schan->dev, "descriptor %p #%d completed.\n",
- tx, tx->cookie);
-
- if (((desc->mark == DESC_COMPLETED ||
- desc->mark == DESC_WAITING) &&
- async_tx_test_ack(&desc->async_tx)) || all) {
-
- if (all || !desc->cyclic) {
- /* Remove from ld_queue list */
- desc->mark = DESC_IDLE;
- list_move(&desc->node, &schan->ld_free);
- } else {
- /* reuse as cyclic */
- desc->mark = DESC_SUBMITTED;
- list_move_tail(&desc->node, &cyclic_list);
- }
-
- if (list_empty(&schan->ld_queue)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- schan->pm_state = SHDMA_PM_ESTABLISHED;
- } else if (schan->pm_state == SHDMA_PM_PENDING) {
- shdma_chan_xfer_ld_queue(schan);
- }
- }
- }
-
- if (all && !callback)
- /*
- * Terminating and the loop completed normally: forgive
- * uncompleted cookies
- */
- schan->dma_chan.completed_cookie = schan->dma_chan.cookie;
-
- list_splice_tail(&cyclic_list, &schan->ld_queue);
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- dmaengine_desc_callback_invoke(&cb, NULL);
-
- return callback;
-}
-
-/*
- * shdma_chan_ld_cleanup - Clean up link descriptors
- *
- * Clean up the ld_queue of DMA channel.
- */
-static void shdma_chan_ld_cleanup(struct shdma_chan *schan, bool all)
-{
- while (__ld_cleanup(schan, all))
- ;
-}
-
-/*
- * shdma_free_chan_resources - Free all resources of the channel.
- */
-static void shdma_free_chan_resources(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- LIST_HEAD(list);
-
- /* Protect against ISR */
- spin_lock_irq(&schan->chan_lock);
- ops->halt_channel(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- /* Now no new interrupts will occur */
-
- /* Prepared and not submitted descriptors can still be on the queue */
- if (!list_empty(&schan->ld_queue))
- shdma_chan_ld_cleanup(schan, true);
-
- if (schan->slave_id >= 0) {
- /* The caller is holding dma_list_mutex */
- clear_bit(schan->slave_id, shdma_slave_used);
- chan->private = NULL;
- }
-
- schan->real_slave_id = 0;
-
- spin_lock_irq(&schan->chan_lock);
-
- list_splice_init(&schan->ld_free, &list);
- schan->desc_num = 0;
-
- spin_unlock_irq(&schan->chan_lock);
-
- kfree(schan->desc);
-}
-
-/**
- * shdma_add_desc - get, set up and return one transfer descriptor
- * @schan: DMA channel
- * @flags: DMA transfer flags
- * @dst: destination DMA address, incremented when direction equals
- * DMA_DEV_TO_MEM or DMA_MEM_TO_MEM
- * @src: source DMA address, incremented when direction equals
- * DMA_MEM_TO_DEV or DMA_MEM_TO_MEM
- * @len: DMA transfer length
- * @first: if NULL, set to the current descriptor and cookie set to -EBUSY
- * @direction: needed for slave DMA to decide which address to keep constant,
- * equals DMA_MEM_TO_MEM for MEMCPY
- * Returns 0 or an error
- * Locks: called with desc_lock held
- */
-static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan,
- unsigned long flags, dma_addr_t *dst, dma_addr_t *src, size_t *len,
- struct shdma_desc **first, enum dma_transfer_direction direction)
-{
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_desc *new;
- size_t copy_size = *len;
-
- if (!copy_size)
- return NULL;
-
- /* Allocate the link descriptor from the free list */
- new = shdma_get_desc(schan);
- if (!new) {
- dev_err(schan->dev, "No free link descriptor available\n");
- return NULL;
- }
-
- ops->desc_setup(schan, new, *src, *dst, ©_size);
-
- if (!*first) {
- /* First desc */
- new->async_tx.cookie = -EBUSY;
- *first = new;
- } else {
- /* Other desc - invisible to the user */
- new->async_tx.cookie = -EINVAL;
- }
-
- dev_dbg(schan->dev,
- "chaining (%zu/%zu)@%pad -> %pad with %p, cookie %d\n",
- copy_size, *len, src, dst, &new->async_tx,
- new->async_tx.cookie);
-
- new->mark = DESC_PREPARED;
- new->async_tx.flags = flags;
- new->direction = direction;
- new->partial = 0;
-
- *len -= copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV)
- *src += copy_size;
- if (direction == DMA_MEM_TO_MEM || direction == DMA_DEV_TO_MEM)
- *dst += copy_size;
-
- return new;
-}
-
-/*
- * shdma_prep_sg - prepare transfer descriptors from an SG list
- *
- * Common routine for public (MEMCPY) and slave DMA. The MEMCPY case is also
- * converted to scatter-gather to guarantee consistent locking and a correct
- * list manipulation. For slave DMA direction carries the usual meaning, and,
- * logically, the SG list is RAM and the addr variable contains slave address,
- * e.g., the FIFO I/O register. For MEMCPY direction equals DMA_MEM_TO_MEM
- * and the SG list contains only one element and points at the source buffer.
- */
-static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan,
- struct scatterlist *sgl, unsigned int sg_len, dma_addr_t *addr,
- enum dma_transfer_direction direction, unsigned long flags, bool cyclic)
-{
- struct scatterlist *sg;
- struct shdma_desc *first = NULL, *new = NULL /* compiler... */;
- LIST_HEAD(tx_list);
- int chunks = 0;
- unsigned long irq_flags;
- int i;
-
- for_each_sg(sgl, sg, sg_len, i)
- chunks += DIV_ROUND_UP(sg_dma_len(sg), schan->max_xfer_len);
-
- /* Have to lock the whole loop to protect against concurrent release */
- spin_lock_irqsave(&schan->chan_lock, irq_flags);
-
- /*
- * Chaining:
- * first descriptor is what user is dealing with in all API calls, its
- * cookie is at first set to -EBUSY, at tx-submit to a positive
- * number
- * if more than one chunk is needed further chunks have cookie = -EINVAL
- * the last chunk, if not equal to the first, has cookie = -ENOSPC
- * all chunks are linked onto the tx_list head with their .node heads
- * only during this function, then they are immediately spliced
- * back onto the free list in form of a chain
- */
- for_each_sg(sgl, sg, sg_len, i) {
- dma_addr_t sg_addr = sg_dma_address(sg);
- size_t len = sg_dma_len(sg);
-
- if (!len)
- goto err_get_desc;
-
- do {
- dev_dbg(schan->dev, "Add SG #%d@%p[%zu], dma %pad\n",
- i, sg, len, &sg_addr);
-
- if (direction == DMA_DEV_TO_MEM)
- new = shdma_add_desc(schan, flags,
- &sg_addr, addr, &len, &first,
- direction);
- else
- new = shdma_add_desc(schan, flags,
- addr, &sg_addr, &len, &first,
- direction);
- if (!new)
- goto err_get_desc;
-
- new->cyclic = cyclic;
- if (cyclic)
- new->chunks = 1;
- else
- new->chunks = chunks--;
- list_add_tail(&new->node, &tx_list);
- } while (len);
- }
-
- if (new != first)
- new->async_tx.cookie = -ENOSPC;
-
- /* Put them back on the free list, so, they don't get lost */
- list_splice_tail(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return &first->async_tx;
-
-err_get_desc:
- list_for_each_entry(new, &tx_list, node)
- new->mark = DESC_IDLE;
- list_splice(&tx_list, &schan->ld_free);
-
- spin_unlock_irqrestore(&schan->chan_lock, irq_flags);
-
- return NULL;
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_memcpy(
- struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
- size_t len, unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct scatterlist sg;
-
- if (!chan || !len)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_src)), len,
- offset_in_page(dma_src));
- sg_dma_address(&sg) = dma_src;
- sg_dma_len(&sg) = len;
-
- return shdma_prep_sg(schan, &sg, 1, &dma_dest, DMA_MEM_TO_MEM,
- flags, false);
-}
-
-static struct dma_async_tx_descriptor *shdma_prep_slave_sg(
- struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
- enum dma_transfer_direction direction, unsigned long flags, void *context)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || !sg_len) {
- dev_warn(schan->dev, "%s: bad parameter: len=%d, id=%d\n",
- __func__, sg_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- return shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, false);
-}
-
-#define SHDMA_MAX_SG_LEN 32
-
-static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
- struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
- size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- struct dma_async_tx_descriptor *desc;
- const struct shdma_ops *ops = sdev->ops;
- unsigned int sg_len = buf_len / period_len;
- int slave_id = schan->slave_id;
- dma_addr_t slave_addr;
- struct scatterlist *sgl;
- int i;
-
- if (!chan)
- return NULL;
-
- BUG_ON(!schan->desc_num);
-
- if (sg_len > SHDMA_MAX_SG_LEN) {
- dev_err(schan->dev, "sg length %d exceeds limit %d",
- sg_len, SHDMA_MAX_SG_LEN);
- return NULL;
- }
-
- /* Someone calling slave DMA on a generic channel? */
- if (slave_id < 0 || (buf_len < period_len)) {
- dev_warn(schan->dev,
- "%s: bad parameter: buf_len=%zu, period_len=%zu, id=%d\n",
- __func__, buf_len, period_len, slave_id);
- return NULL;
- }
-
- slave_addr = ops->slave_addr(schan);
-
- /*
- * Allocate the sg list dynamically as it would consumer too much stack
- * space.
- */
- sgl = kmalloc_array(sg_len, sizeof(*sgl), GFP_KERNEL);
- if (!sgl)
- return NULL;
-
- sg_init_table(sgl, sg_len);
-
- for (i = 0; i < sg_len; i++) {
- dma_addr_t src = buf_addr + (period_len * i);
-
- sg_set_page(&sgl[i], pfn_to_page(PFN_DOWN(src)), period_len,
- offset_in_page(src));
- sg_dma_address(&sgl[i]) = src;
- sg_dma_len(&sgl[i]) = period_len;
- }
-
- desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
- direction, flags, true);
-
- kfree(sgl);
- return desc;
-}
-
-static int shdma_terminate_all(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(chan->device);
- const struct shdma_ops *ops = sdev->ops;
- unsigned long flags;
-
- spin_lock_irqsave(&schan->chan_lock, flags);
- ops->halt_channel(schan);
-
- if (ops->get_partial && !list_empty(&schan->ld_queue)) {
- /* Record partial transfer */
- struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
- struct shdma_desc, node);
- desc->partial = ops->get_partial(schan, desc);
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- shdma_chan_ld_cleanup(schan, true);
-
- return 0;
-}
-
-static int shdma_config(struct dma_chan *chan,
- struct dma_slave_config *config)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- /*
- * So far only .slave_id is used, but the slave drivers are
- * encouraged to also set a transfer direction and an address.
- */
- if (!config)
- return -EINVAL;
-
- /*
- * We could lock this, but you shouldn't be configuring the
- * channel, while using it...
- */
- return shdma_setup_slave(schan,
- config->direction == DMA_DEV_TO_MEM ?
- config->src_addr : config->dst_addr);
-}
-
-static void shdma_issue_pending(struct dma_chan *chan)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
-
- spin_lock_irq(&schan->chan_lock);
- if (schan->pm_state == SHDMA_PM_ESTABLISHED)
- shdma_chan_xfer_ld_queue(schan);
- else
- schan->pm_state = SHDMA_PM_PENDING;
- spin_unlock_irq(&schan->chan_lock);
-}
-
-static enum dma_status shdma_tx_status(struct dma_chan *chan,
- dma_cookie_t cookie,
- struct dma_tx_state *txstate)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- enum dma_status status;
- unsigned long flags;
-
- shdma_chan_ld_cleanup(schan, false);
-
- spin_lock_irqsave(&schan->chan_lock, flags);
-
- status = dma_cookie_status(chan, cookie, txstate);
-
- /*
- * If we don't find cookie on the queue, it has been aborted and we have
- * to report error
- */
- if (status != DMA_COMPLETE) {
- struct shdma_desc *sdesc;
- status = DMA_ERROR;
- list_for_each_entry(sdesc, &schan->ld_queue, node)
- if (sdesc->cookie == cookie) {
- status = DMA_IN_PROGRESS;
- break;
- }
- }
-
- spin_unlock_irqrestore(&schan->chan_lock, flags);
-
- return status;
-}
-
-/* Called from error IRQ or NMI */
-bool shdma_reset(struct shdma_dev *sdev)
-{
- const struct shdma_ops *ops = sdev->ops;
- struct shdma_chan *schan;
- unsigned int handled = 0;
- int i;
-
- /* Reset all channels */
- shdma_for_each_chan(schan, sdev, i) {
- struct shdma_desc *sdesc;
- LIST_HEAD(dl);
-
- if (!schan)
- continue;
-
- spin_lock(&schan->chan_lock);
-
- /* Stop the channel */
- ops->halt_channel(schan);
-
- list_splice_init(&schan->ld_queue, &dl);
-
- if (!list_empty(&dl)) {
- dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
- pm_runtime_put(schan->dev);
- }
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- spin_unlock(&schan->chan_lock);
-
- /* Complete all */
- list_for_each_entry(sdesc, &dl, node) {
- struct dma_async_tx_descriptor *tx = &sdesc->async_tx;
-
- sdesc->mark = DESC_IDLE;
- dmaengine_desc_get_callback_invoke(tx, NULL);
- }
-
- spin_lock(&schan->chan_lock);
- list_splice(&dl, &schan->ld_free);
- spin_unlock(&schan->chan_lock);
-
- handled++;
- }
-
- return !!handled;
-}
-EXPORT_SYMBOL(shdma_reset);
-
-static irqreturn_t chan_irq(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- irqreturn_t ret;
-
- spin_lock(&schan->chan_lock);
-
- ret = ops->chan_irq(schan, irq) ? IRQ_WAKE_THREAD : IRQ_NONE;
-
- spin_unlock(&schan->chan_lock);
-
- return ret;
-}
-
-static irqreturn_t chan_irqt(int irq, void *dev)
-{
- struct shdma_chan *schan = dev;
- const struct shdma_ops *ops =
- to_shdma_dev(schan->dma_chan.device)->ops;
- struct shdma_desc *sdesc;
-
- spin_lock_irq(&schan->chan_lock);
- list_for_each_entry(sdesc, &schan->ld_queue, node) {
- if (sdesc->mark == DESC_SUBMITTED &&
- ops->desc_completed(schan, sdesc)) {
- dev_dbg(schan->dev, "done #%d@%p\n",
- sdesc->async_tx.cookie, &sdesc->async_tx);
- sdesc->mark = DESC_COMPLETED;
- break;
- }
- }
- /* Next desc */
- shdma_chan_xfer_ld_queue(schan);
- spin_unlock_irq(&schan->chan_lock);
-
- shdma_chan_ld_cleanup(schan, false);
-
- return IRQ_HANDLED;
-}
-
-int shdma_request_irq(struct shdma_chan *schan, int irq,
- unsigned long flags, const char *name)
-{
- int ret = devm_request_threaded_irq(schan->dev, irq, chan_irq,
- chan_irqt, flags, name, schan);
-
- schan->irq = ret < 0 ? ret : irq;
-
- return ret;
-}
-EXPORT_SYMBOL(shdma_request_irq);
-
-void shdma_chan_probe(struct shdma_dev *sdev,
- struct shdma_chan *schan, int id)
-{
- schan->pm_state = SHDMA_PM_ESTABLISHED;
-
- /* reference struct dma_device */
- schan->dma_chan.device = &sdev->dma_dev;
- dma_cookie_init(&schan->dma_chan);
-
- schan->dev = sdev->dma_dev.dev;
- schan->id = id;
-
- if (!schan->max_xfer_len)
- schan->max_xfer_len = PAGE_SIZE;
-
- spin_lock_init(&schan->chan_lock);
-
- /* Init descripter manage list */
- INIT_LIST_HEAD(&schan->ld_queue);
- INIT_LIST_HEAD(&schan->ld_free);
-
- /* Add the channel to DMA device channel list */
- list_add_tail(&schan->dma_chan.device_node,
- &sdev->dma_dev.channels);
- sdev->schan[id] = schan;
-}
-EXPORT_SYMBOL(shdma_chan_probe);
-
-void shdma_chan_remove(struct shdma_chan *schan)
-{
- list_del(&schan->dma_chan.device_node);
-}
-EXPORT_SYMBOL(shdma_chan_remove);
-
-int shdma_init(struct device *dev, struct shdma_dev *sdev,
- int chan_num)
-{
- struct dma_device *dma_dev = &sdev->dma_dev;
-
- /*
- * Require all call-backs for now, they can trivially be made optional
- * later as required
- */
- if (!sdev->ops ||
- !sdev->desc_size ||
- !sdev->ops->embedded_desc ||
- !sdev->ops->start_xfer ||
- !sdev->ops->setup_xfer ||
- !sdev->ops->set_slave ||
- !sdev->ops->desc_setup ||
- !sdev->ops->slave_addr ||
- !sdev->ops->channel_busy ||
- !sdev->ops->halt_channel ||
- !sdev->ops->desc_completed)
- return -EINVAL;
-
- sdev->schan = kcalloc(chan_num, sizeof(*sdev->schan), GFP_KERNEL);
- if (!sdev->schan)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&dma_dev->channels);
-
- /* Common and MEMCPY operations */
- dma_dev->device_alloc_chan_resources
- = shdma_alloc_chan_resources;
- dma_dev->device_free_chan_resources = shdma_free_chan_resources;
- dma_dev->device_prep_dma_memcpy = shdma_prep_memcpy;
- dma_dev->device_tx_status = shdma_tx_status;
- dma_dev->device_issue_pending = shdma_issue_pending;
-
- /* Compulsory for DMA_SLAVE fields */
- dma_dev->device_prep_slave_sg = shdma_prep_slave_sg;
- dma_dev->device_prep_dma_cyclic = shdma_prep_dma_cyclic;
- dma_dev->device_config = shdma_config;
- dma_dev->device_terminate_all = shdma_terminate_all;
-
- dma_dev->dev = dev;
-
- return 0;
-}
-EXPORT_SYMBOL(shdma_init);
-
-void shdma_cleanup(struct shdma_dev *sdev)
-{
- kfree(sdev->schan);
-}
-EXPORT_SYMBOL(shdma_cleanup);
-
-static int __init shdma_enter(void)
-{
- shdma_slave_used = bitmap_zalloc(slave_num, GFP_KERNEL);
- if (!shdma_slave_used)
- return -ENOMEM;
- return 0;
-}
-module_init(shdma_enter);
-
-static void __exit shdma_exit(void)
-{
- bitmap_free(shdma_slave_used);
-}
-module_exit(shdma_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH-DMA driver base library");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
deleted file mode 100644
index 9c121a4b33ad82..00000000000000
--- a/drivers/dma/sh/shdma.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Renesas SuperH DMA Engine support
- *
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- *
- */
-#ifndef __DMA_SHDMA_H
-#define __DMA_SHDMA_H
-
-#include <linux/sh_dma.h>
-#include <linux/shdma-base.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#define SH_DMAE_MAX_CHANNELS 20
-#define SH_DMAE_TCR_MAX 0x00FFFFFF /* 16MB */
-
-struct device;
-
-struct sh_dmae_chan {
- struct shdma_chan shdma_chan;
- const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
- int xmit_shift; /* log_2(bytes_per_xfer) */
- void __iomem *base;
- char dev_id[16]; /* unique name per DMAC of channel */
- int pm_error;
- dma_addr_t slave_addr;
-};
-
-struct sh_dmae_device {
- struct shdma_dev shdma_dev;
- struct sh_dmae_chan *chan[SH_DMAE_MAX_CHANNELS];
- const struct sh_dmae_pdata *pdata;
- struct list_head node;
- void __iomem *chan_reg;
- void __iomem *dmars;
- unsigned int chcr_offset;
- u32 chcr_ie_bit;
-};
-
-struct sh_dmae_regs {
- u32 sar; /* SAR / source address */
- u32 dar; /* DAR / destination address */
- u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_dmae_desc {
- struct sh_dmae_regs hw;
- struct shdma_desc shdma_desc;
-};
-
-#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, shdma_chan)
-#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
-#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
-#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
- struct sh_dmae_device, shdma_dev.dma_dev)
-
-#endif /* __DMA_SHDMA_H */
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
deleted file mode 100644
index 5aafe548ca5f30..00000000000000
--- a/drivers/dma/sh/shdmac.c
+++ /dev/null
@@ -1,938 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Renesas SuperH DMA Engine support
- *
- * base is drivers/dma/flsdma.c
- *
- * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * - DMA of SuperH does not have Hardware DMA chain mode.
- * - MAX DMA size is 16MB.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kdebug.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/rculist.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#include "../dmaengine.h"
-#include "shdma.h"
-
-/* DMA registers */
-#define SAR 0x00 /* Source Address Register */
-#define DAR 0x04 /* Destination Address Register */
-#define TCR 0x08 /* Transfer Count Register */
-#define CHCR 0x0C /* Channel Control Register */
-#define DMAOR 0x40 /* DMA Operation Register */
-
-#define TEND 0x18 /* USB-DMAC */
-
-#define SH_DMAE_DRV_NAME "sh-dma-engine"
-
-/* Default MEMCPY transfer size = 2^2 = 4 bytes */
-#define LOG2_DEFAULT_XFER_SIZE 2
-#define SH_DMA_SLAVE_NUMBER 256
-#define SH_DMA_TCR_MAX (16 * 1024 * 1024 - 1)
-
-/*
- * Used for write-side mutual exclusion for the global device list,
- * read-side synchronization by way of RCU, and per-controller data.
- */
-static DEFINE_SPINLOCK(sh_dmae_lock);
-static LIST_HEAD(sh_dmae_devices);
-
-/*
- * Different DMAC implementations provide different ways to clear DMA channels:
- * (1) none - no CHCLR registers are available
- * (2) one CHCLR register per channel - 0 has to be written to it to clear
- * channel buffers
- * (3) one CHCLR per several channels - 1 has to be written to the bit,
- * corresponding to the specific channel to reset it
- */
-static void channel_clear(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
- const struct sh_dmae_channel *chan_pdata = shdev->pdata->channel +
- sh_dc->shdma_chan.id;
- u32 val = shdev->pdata->chclr_bitwise ? 1 << chan_pdata->chclr_bit : 0;
-
- __raw_writel(val, shdev->chan_reg + chan_pdata->chclr_offset);
-}
-
-static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
-{
- __raw_writel(data, sh_dc->base + reg);
-}
-
-static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
-{
- return __raw_readl(sh_dc->base + reg);
-}
-
-static u16 dmaor_read(struct sh_dmae_device *shdev)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- return __raw_readl(addr);
- else
- return __raw_readw(addr);
-}
-
-static void dmaor_write(struct sh_dmae_device *shdev, u16 data)
-{
- void __iomem *addr = shdev->chan_reg + DMAOR;
-
- if (shdev->pdata->dmaor_is_32bit)
- __raw_writel(data, addr);
- else
- __raw_writew(data, addr);
-}
-
-static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- __raw_writel(data, sh_dc->base + shdev->chcr_offset);
-}
-
-static u32 chcr_read(struct sh_dmae_chan *sh_dc)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
-
- return __raw_readl(sh_dc->base + shdev->chcr_offset);
-}
-
-/*
- * Reset DMA controller
- *
- * SH7780 has two DMAOR register
- */
-static void sh_dmae_ctl_stop(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev);
- dmaor_write(shdev, dmaor & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME));
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-}
-
-static int sh_dmae_rst(struct sh_dmae_device *shdev)
-{
- unsigned short dmaor;
- unsigned long flags;
-
- spin_lock_irqsave(&sh_dmae_lock, flags);
-
- dmaor = dmaor_read(shdev) & ~(DMAOR_NMIF | DMAOR_AE | DMAOR_DME);
-
- if (shdev->pdata->chclr_present) {
- int i;
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
- if (sh_chan)
- channel_clear(sh_chan);
- }
- }
-
- dmaor_write(shdev, dmaor | shdev->pdata->dmaor_init);
-
- dmaor = dmaor_read(shdev);
-
- spin_unlock_irqrestore(&sh_dmae_lock, flags);
-
- if (dmaor & (DMAOR_AE | DMAOR_NMIF)) {
- dev_warn(shdev->shdma_dev.dma_dev.dev, "Can't initialize DMAOR.\n");
- return -EIO;
- }
- if (shdev->pdata->dmaor_init & ~dmaor)
- dev_warn(shdev->shdma_dev.dma_dev.dev,
- "DMAOR=0x%x hasn't latched the initial value 0x%x.\n",
- dmaor, shdev->pdata->dmaor_init);
- return 0;
-}
-
-static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
-{
- u32 chcr = chcr_read(sh_chan);
-
- if ((chcr & (CHCR_DE | CHCR_TE)) == CHCR_DE)
- return true; /* working */
-
- return false; /* waiting */
-}
-
-static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) |
- ((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift);
-
- if (cnt >= pdata->ts_shift_num)
- cnt = 0;
-
- return pdata->ts_shift[cnt];
-}
-
-static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- int i;
-
- for (i = 0; i < pdata->ts_shift_num; i++)
- if (pdata->ts_shift[i] == l2size)
- break;
-
- if (i == pdata->ts_shift_num)
- i = 0;
-
- return ((i << pdata->ts_low_shift) & pdata->ts_low_mask) |
- ((i << pdata->ts_high_shift) & pdata->ts_high_mask);
-}
-
-static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
-{
- sh_dmae_writel(sh_chan, hw->sar, SAR);
- sh_dmae_writel(sh_chan, hw->dar, DAR);
- sh_dmae_writel(sh_chan, hw->tcr >> sh_chan->xmit_shift, TCR);
-}
-
-static void dmae_start(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- if (shdev->pdata->needs_tend_set)
- sh_dmae_writel(sh_chan, 0xFFFFFFFF, TEND);
-
- chcr |= CHCR_DE | shdev->chcr_ie_bit;
- chcr_write(sh_chan, chcr & ~CHCR_TE);
-}
-
-static void dmae_init(struct sh_dmae_chan *sh_chan)
-{
- /*
- * Default configuration for dual address memory-memory transfer.
- */
- u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan,
- LOG2_DEFAULT_XFER_SIZE);
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
- chcr_write(sh_chan, chcr);
-}
-
-static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
-{
- /* If DMA is active, cannot set CHCR. TODO: remove this superfluous check */
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- sh_chan->xmit_shift = calc_xmit_shift(sh_chan, val);
- chcr_write(sh_chan, val);
-
- return 0;
-}
-
-static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->shdma_chan.id];
- void __iomem *addr = shdev->dmars;
- unsigned int shift = chan_pdata->dmars_bit;
-
- if (dmae_is_busy(sh_chan))
- return -EBUSY;
-
- if (pdata->no_dmars)
- return 0;
-
- /* in the case of a missing DMARS resource use first memory window */
- if (!addr)
- addr = shdev->chan_reg;
- addr += chan_pdata->dmars;
-
- __raw_writew((__raw_readw(addr) & (0xff00 >> shift)) | (val << shift),
- addr);
-
- return 0;
-}
-
-static void sh_dmae_start_xfer(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- dev_dbg(sh_chan->shdma_chan.dev, "Queue #%d to %d: %u@%x -> %x\n",
- sdesc->async_tx.cookie, sh_chan->shdma_chan.id,
- sh_desc->hw.tcr, sh_desc->hw.sar, sh_desc->hw.dar);
- /* Get the ld start address from ld_queue */
- dmae_set_reg(sh_chan, &sh_desc->hw);
- dmae_start(sh_chan);
-}
-
-static bool sh_dmae_channel_busy(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- return dmae_is_busy(sh_chan);
-}
-
-static void sh_dmae_setup_xfer(struct shdma_chan *schan,
- int slave_id)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg =
- sh_chan->config;
-
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
-}
-
-/*
- * Find a slave channel configuration from the contoller list by either a slave
- * ID in the non-DT case, or by a MID/RID value in the DT case
- */
-static const struct sh_dmae_slave_config *dmae_find_slave(
- struct sh_dmae_chan *sh_chan, int match)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- const struct sh_dmae_pdata *pdata = shdev->pdata;
- const struct sh_dmae_slave_config *cfg;
- int i;
-
- if (!sh_chan->shdma_chan.dev->of_node) {
- if (match >= SH_DMA_SLAVE_NUMBER)
- return NULL;
-
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->slave_id == match)
- return cfg;
- } else {
- for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->mid_rid == match) {
- sh_chan->shdma_chan.slave_id = i;
- return cfg;
- }
- }
-
- return NULL;
-}
-
-static int sh_dmae_set_slave(struct shdma_chan *schan,
- int slave_id, dma_addr_t slave_addr, bool try)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- const struct sh_dmae_slave_config *cfg = dmae_find_slave(sh_chan, slave_id);
- if (!cfg)
- return -ENXIO;
-
- if (!try) {
- sh_chan->config = cfg;
- sh_chan->slave_addr = slave_addr ? : cfg->addr;
- }
-
- return 0;
-}
-
-static void dmae_halt(struct sh_dmae_chan *sh_chan)
-{
- struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
- u32 chcr = chcr_read(sh_chan);
-
- chcr &= ~(CHCR_DE | CHCR_TE | shdev->chcr_ie_bit);
- chcr_write(sh_chan, chcr);
-}
-
-static int sh_dmae_desc_setup(struct shdma_chan *schan,
- struct shdma_desc *sdesc,
- dma_addr_t src, dma_addr_t dst, size_t *len)
-{
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
-
- if (*len > schan->max_xfer_len)
- *len = schan->max_xfer_len;
-
- sh_desc->hw.sar = src;
- sh_desc->hw.dar = dst;
- sh_desc->hw.tcr = *len;
-
- return 0;
-}
-
-static void sh_dmae_halt(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- dmae_halt(sh_chan);
-}
-
-static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
-
- if (!(chcr_read(sh_chan) & CHCR_TE))
- return false;
-
- /* DMA stop */
- dmae_halt(sh_chan);
-
- return true;
-}
-
-static size_t sh_dmae_get_partial(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
- shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- return sh_desc->hw.tcr -
- (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift);
-}
-
-/* Called from error IRQ or NMI */
-static bool sh_dmae_reset(struct sh_dmae_device *shdev)
-{
- bool ret;
-
- /* halt the dma controller */
- sh_dmae_ctl_stop(shdev);
-
- /* We cannot detect, which channel caused the error, have to reset all */
- ret = shdma_reset(&shdev->shdma_dev);
-
- sh_dmae_rst(shdev);
-
- return ret;
-}
-
-static irqreturn_t sh_dmae_err(int irq, void *data)
-{
- struct sh_dmae_device *shdev = data;
-
- if (!(dmaor_read(shdev) & DMAOR_AE))
- return IRQ_NONE;
-
- sh_dmae_reset(shdev);
- return IRQ_HANDLED;
-}
-
-static bool sh_dmae_desc_completed(struct shdma_chan *schan,
- struct shdma_desc *sdesc)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
- struct sh_dmae_desc *sh_desc = container_of(sdesc,
- struct sh_dmae_desc, shdma_desc);
- u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
- u32 dar_buf = sh_dmae_readl(sh_chan, DAR);
-
- return (sdesc->direction == DMA_DEV_TO_MEM &&
- (sh_desc->hw.dar + sh_desc->hw.tcr) == dar_buf) ||
- (sdesc->direction != DMA_DEV_TO_MEM &&
- (sh_desc->hw.sar + sh_desc->hw.tcr) == sar_buf);
-}
-
-static bool sh_dmae_nmi_notify(struct sh_dmae_device *shdev)
-{
- /* Fast path out if NMIF is not asserted for this controller */
- if ((dmaor_read(shdev) & DMAOR_NMIF) == 0)
- return false;
-
- return sh_dmae_reset(shdev);
-}
-
-static int sh_dmae_nmi_handler(struct notifier_block *self,
- unsigned long cmd, void *data)
-{
- struct sh_dmae_device *shdev;
- int ret = NOTIFY_DONE;
- bool triggered;
-
- /*
- * Only concern ourselves with NMI events.
- *
- * Normally we would check the die chain value, but as this needs
- * to be architecture independent, check for NMI context instead.
- */
- if (!in_nmi())
- return NOTIFY_DONE;
-
- rcu_read_lock();
- list_for_each_entry_rcu(shdev, &sh_dmae_devices, node) {
- /*
- * Only stop if one of the controllers has NMIF asserted,
- * we do not want to interfere with regular address error
- * handling or NMI events that don't concern the DMACs.
- */
- triggered = sh_dmae_nmi_notify(shdev);
- if (triggered == true)
- ret = NOTIFY_OK;
- }
- rcu_read_unlock();
-
- return ret;
-}
-
-static struct notifier_block sh_dmae_nmi_notifier __read_mostly = {
- .notifier_call = sh_dmae_nmi_handler,
-
- /* Run before NMI debug handler and KGDB */
- .priority = 1,
-};
-
-static int sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
- int irq, unsigned long flags)
-{
- const struct sh_dmae_channel *chan_pdata = &shdev->pdata->channel[id];
- struct shdma_dev *sdev = &shdev->shdma_dev;
- struct platform_device *pdev = to_platform_device(sdev->dma_dev.dev);
- struct sh_dmae_chan *sh_chan;
- struct shdma_chan *schan;
- int err;
-
- sh_chan = devm_kzalloc(sdev->dma_dev.dev, sizeof(struct sh_dmae_chan),
- GFP_KERNEL);
- if (!sh_chan)
- return -ENOMEM;
-
- schan = &sh_chan->shdma_chan;
- schan->max_xfer_len = SH_DMA_TCR_MAX + 1;
-
- shdma_chan_probe(sdev, schan, id);
-
- sh_chan->base = shdev->chan_reg + chan_pdata->offset;
-
- /* set up channel irq */
- if (pdev->id >= 0)
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dmae%d.%d", pdev->id, id);
- else
- snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
- "sh-dma%d", id);
-
- err = shdma_request_irq(schan, irq, flags, sh_chan->dev_id);
- if (err) {
- dev_err(sdev->dma_dev.dev,
- "DMA channel %d request_irq error %d\n",
- id, err);
- goto err_no_irq;
- }
-
- shdev->chan[id] = sh_chan;
- return 0;
-
-err_no_irq:
- /* remove from dmaengine device node */
- shdma_chan_remove(schan);
- return err;
-}
-
-static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
-{
- struct shdma_chan *schan;
- int i;
-
- shdma_for_each_chan(schan, &shdev->shdma_dev, i) {
- BUG_ON(!schan);
-
- shdma_chan_remove(schan);
- }
-}
-
-#ifdef CONFIG_PM
-static int sh_dmae_runtime_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_runtime_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- return sh_dmae_rst(shdev);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int sh_dmae_suspend(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
-
- sh_dmae_ctl_stop(shdev);
- return 0;
-}
-
-static int sh_dmae_resume(struct device *dev)
-{
- struct sh_dmae_device *shdev = dev_get_drvdata(dev);
- int i, ret;
-
- ret = sh_dmae_rst(shdev);
- if (ret < 0)
- dev_err(dev, "Failed to reset!\n");
-
- for (i = 0; i < shdev->pdata->channel_num; i++) {
- struct sh_dmae_chan *sh_chan = shdev->chan[i];
-
- if (!sh_chan->shdma_chan.desc_num)
- continue;
-
- if (sh_chan->shdma_chan.slave_id >= 0) {
- const struct sh_dmae_slave_config *cfg = sh_chan->config;
- dmae_set_dmars(sh_chan, cfg->mid_rid);
- dmae_set_chcr(sh_chan, cfg->chcr);
- } else {
- dmae_init(sh_chan);
- }
- }
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops sh_dmae_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(sh_dmae_suspend, sh_dmae_resume)
- SET_RUNTIME_PM_OPS(sh_dmae_runtime_suspend, sh_dmae_runtime_resume,
- NULL)
-};
-
-static dma_addr_t sh_dmae_slave_addr(struct shdma_chan *schan)
-{
- struct sh_dmae_chan *sh_chan = container_of(schan,
- struct sh_dmae_chan, shdma_chan);
-
- /*
- * Implicit BUG_ON(!sh_chan->config)
- * This is an exclusive slave DMA operation, may only be called after a
- * successful slave configuration.
- */
- return sh_chan->slave_addr;
-}
-
-static struct shdma_desc *sh_dmae_embedded_desc(void *buf, int i)
-{
- return &((struct sh_dmae_desc *)buf)[i].shdma_desc;
-}
-
-static const struct shdma_ops sh_dmae_shdma_ops = {
- .desc_completed = sh_dmae_desc_completed,
- .halt_channel = sh_dmae_halt,
- .channel_busy = sh_dmae_channel_busy,
- .slave_addr = sh_dmae_slave_addr,
- .desc_setup = sh_dmae_desc_setup,
- .set_slave = sh_dmae_set_slave,
- .setup_xfer = sh_dmae_setup_xfer,
- .start_xfer = sh_dmae_start_xfer,
- .embedded_desc = sh_dmae_embedded_desc,
- .chan_irq = sh_dmae_chan_irq,
- .get_partial = sh_dmae_get_partial,
-};
-
-static int sh_dmae_probe(struct platform_device *pdev)
-{
- const enum dma_slave_buswidth widths =
- DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
- DMA_SLAVE_BUSWIDTH_4_BYTES | DMA_SLAVE_BUSWIDTH_8_BYTES |
- DMA_SLAVE_BUSWIDTH_16_BYTES | DMA_SLAVE_BUSWIDTH_32_BYTES;
- const struct sh_dmae_pdata *pdata;
- unsigned long chan_flag[SH_DMAE_MAX_CHANNELS] = {};
- int chan_irq[SH_DMAE_MAX_CHANNELS];
- unsigned long irqflags = 0;
- int err, errirq, i, irq_cnt = 0, irqres = 0, irq_cap = 0;
- struct sh_dmae_device *shdev;
- struct dma_device *dma_dev;
- struct resource *chan, *dmars, *errirq_res, *chanirq_res;
-
- if (pdev->dev.of_node)
- pdata = of_device_get_match_data(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- /* get platform data */
- if (!pdata || !pdata->channel_num)
- return -ENODEV;
-
- chan = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- /* DMARS area is optional */
- dmars = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- /*
- * IRQ resources:
- * 1. there always must be at least one IRQ IO-resource. On SH4 it is
- * the error IRQ, in which case it is the only IRQ in this resource:
- * start == end. If it is the only IRQ resource, all channels also
- * use the same IRQ.
- * 2. DMA channel IRQ resources can be specified one per resource or in
- * ranges (start != end)
- * 3. iff all events (channels and, optionally, error) on this
- * controller use the same IRQ, only one IRQ resource can be
- * specified, otherwise there must be one IRQ per channel, even if
- * some of them are equal
- * 4. if all IRQs on this controller are equal or if some specific IRQs
- * specify IORESOURCE_IRQ_SHAREABLE in their resources, they will be
- * requested with the IRQF_SHARED flag
- */
- errirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!chan || !errirq_res)
- return -ENODEV;
-
- shdev = devm_kzalloc(&pdev->dev, sizeof(struct sh_dmae_device),
- GFP_KERNEL);
- if (!shdev)
- return -ENOMEM;
-
- dma_dev = &shdev->shdma_dev.dma_dev;
-
- shdev->chan_reg = devm_ioremap_resource(&pdev->dev, chan);
- if (IS_ERR(shdev->chan_reg))
- return PTR_ERR(shdev->chan_reg);
- if (dmars) {
- shdev->dmars = devm_ioremap_resource(&pdev->dev, dmars);
- if (IS_ERR(shdev->dmars))
- return PTR_ERR(shdev->dmars);
- }
-
- dma_dev->src_addr_widths = widths;
- dma_dev->dst_addr_widths = widths;
- dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
- dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-
- if (!pdata->slave_only)
- dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
- if (pdata->slave && pdata->slave_num)
- dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
-
- /* Default transfer size of 32 bytes requires 32-byte alignment */
- dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE;
-
- shdev->shdma_dev.ops = &sh_dmae_shdma_ops;
- shdev->shdma_dev.desc_size = sizeof(struct sh_dmae_desc);
- err = shdma_init(&pdev->dev, &shdev->shdma_dev,
- pdata->channel_num);
- if (err < 0)
- goto eshdma;
-
- /* platform data */
- shdev->pdata = pdata;
-
- if (pdata->chcr_offset)
- shdev->chcr_offset = pdata->chcr_offset;
- else
- shdev->chcr_offset = CHCR;
-
- if (pdata->chcr_ie_bit)
- shdev->chcr_ie_bit = pdata->chcr_ie_bit;
- else
- shdev->chcr_ie_bit = CHCR_IE;
-
- platform_set_drvdata(pdev, shdev);
-
- pm_runtime_enable(&pdev->dev);
- err = pm_runtime_get_sync(&pdev->dev);
- if (err < 0)
- dev_err(&pdev->dev, "%s(): GET = %d\n", __func__, err);
-
- spin_lock_irq(&sh_dmae_lock);
- list_add_tail_rcu(&shdev->node, &sh_dmae_devices);
- spin_unlock_irq(&sh_dmae_lock);
-
- /* reset dma controller - only needed as a test */
- err = sh_dmae_rst(shdev);
- if (err)
- goto rst_err;
-
- if (IS_ENABLED(CONFIG_CPU_SH4) || IS_ENABLED(CONFIG_ARCH_RENESAS)) {
- chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-
- if (!chanirq_res)
- chanirq_res = errirq_res;
- else
- irqres++;
-
- if (chanirq_res == errirq_res ||
- (errirq_res->flags & IORESOURCE_BITS) == IORESOURCE_IRQ_SHAREABLE)
- irqflags = IRQF_SHARED;
-
- errirq = errirq_res->start;
-
- err = devm_request_irq(&pdev->dev, errirq, sh_dmae_err,
- irqflags, "DMAC Address Error", shdev);
- if (err) {
- dev_err(&pdev->dev,
- "DMA failed requesting irq #%d, error %d\n",
- errirq, err);
- goto eirq_err;
- }
- } else {
- chanirq_res = errirq_res;
- }
-
- if (chanirq_res->start == chanirq_res->end &&
- !platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
- /* Special case - all multiplexed */
- for (; irq_cnt < pdata->channel_num; irq_cnt++) {
- if (irq_cnt < SH_DMAE_MAX_CHANNELS) {
- chan_irq[irq_cnt] = chanirq_res->start;
- chan_flag[irq_cnt] = IRQF_SHARED;
- } else {
- irq_cap = 1;
- break;
- }
- }
- } else {
- do {
- for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS) {
- irq_cap = 1;
- break;
- }
-
- if ((errirq_res->flags & IORESOURCE_BITS) ==
- IORESOURCE_IRQ_SHAREABLE)
- chan_flag[irq_cnt] = IRQF_SHARED;
- else
- chan_flag[irq_cnt] = 0;
- dev_dbg(&pdev->dev,
- "Found IRQ %d for channel %d\n",
- i, irq_cnt);
- chan_irq[irq_cnt++] = i;
- }
-
- if (irq_cnt >= SH_DMAE_MAX_CHANNELS)
- break;
-
- chanirq_res = platform_get_resource(pdev,
- IORESOURCE_IRQ, ++irqres);
- } while (irq_cnt < pdata->channel_num && chanirq_res);
- }
-
- /* Create DMA Channel */
- for (i = 0; i < irq_cnt; i++) {
- err = sh_dmae_chan_probe(shdev, i, chan_irq[i], chan_flag[i]);
- if (err)
- goto chan_probe_err;
- }
-
- if (irq_cap)
- dev_notice(&pdev->dev, "Attempting to register %d DMA "
- "channels when a maximum of %d are supported.\n",
- pdata->channel_num, SH_DMAE_MAX_CHANNELS);
-
- pm_runtime_put(&pdev->dev);
-
- err = dma_async_device_register(&shdev->shdma_dev.dma_dev);
- if (err < 0)
- goto edmadevreg;
-
- return err;
-
-edmadevreg:
- pm_runtime_get(&pdev->dev);
-
-chan_probe_err:
- sh_dmae_chan_remove(shdev);
-
-eirq_err:
-rst_err:
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- shdma_cleanup(&shdev->shdma_dev);
-eshdma:
- synchronize_rcu();
-
- return err;
-}
-
-static int sh_dmae_remove(struct platform_device *pdev)
-{
- struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
- struct dma_device *dma_dev = &shdev->shdma_dev.dma_dev;
-
- dma_async_device_unregister(dma_dev);
-
- spin_lock_irq(&sh_dmae_lock);
- list_del_rcu(&shdev->node);
- spin_unlock_irq(&sh_dmae_lock);
-
- pm_runtime_disable(&pdev->dev);
-
- sh_dmae_chan_remove(shdev);
- shdma_cleanup(&shdev->shdma_dev);
-
- synchronize_rcu();
-
- return 0;
-}
-
-static struct platform_driver sh_dmae_driver = {
- .driver = {
- .pm = &sh_dmae_pm,
- .name = SH_DMAE_DRV_NAME,
- },
- .remove = sh_dmae_remove,
-};
-
-static int __init sh_dmae_init(void)
-{
- /* Wire up NMI handling */
- int err = register_die_notifier(&sh_dmae_nmi_notifier);
- if (err)
- return err;
-
- return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
-}
-module_init(sh_dmae_init);
-
-static void __exit sh_dmae_exit(void)
-{
- platform_driver_unregister(&sh_dmae_driver);
-
- unregister_die_notifier(&sh_dmae_nmi_notifier);
-}
-module_exit(sh_dmae_exit);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
-MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" SH_DMAE_DRV_NAME);
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index 6dfd05ef5c2d9f..dd32aba344757f 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -122,13 +122,9 @@ void shdma_chan_remove(struct shdma_chan *schan);
int shdma_init(struct device *dev, struct shdma_dev *sdev,
int chan_num);
void shdma_cleanup(struct shdma_dev *sdev);
-#if IS_ENABLED(CONFIG_SH_DMAE_BASE)
-bool shdma_chan_filter(struct dma_chan *chan, void *arg);
-#else
static inline bool shdma_chan_filter(struct dma_chan *chan, void *arg)
{
return false;
}
-#endif
#endif
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 09/22] i2c: remove i2c-sh7760
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/i2c/busses/Kconfig | 9 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-sh7760.c | 565 --------------------------------
3 files changed, 575 deletions(-)
delete mode 100644 drivers/i2c/busses/i2c-sh7760.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 22602c512a6e50..44267a023fd19a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1016,15 +1016,6 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung SoCs (S3C, S5Pv210, Exynos).
-config I2C_SH7760
- tristate "Renesas SH7760 I2C Controller"
- depends on CPU_SUBTYPE_SH7760
- help
- This driver supports the 2 I2C interfaces on the Renesas SH7760.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-sh7760.
-
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e73cdb1d2b5a85..6be213e5e4dd16 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -104,7 +104,6 @@ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
obj-$(CONFIG_I2C_RZV2M) += i2c-rzv2m.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
-obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
deleted file mode 100644
index 319d1fa617c883..00000000000000
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * I2C bus driver for the SH7760 I2C Interfaces.
- *
- * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- *
- * licensed under the terms outlined in the file COPYING.
- *
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/i2c-sh7760.h>
-
-/* register offsets */
-#define I2CSCR 0x0 /* slave ctrl */
-#define I2CMCR 0x4 /* master ctrl */
-#define I2CSSR 0x8 /* slave status */
-#define I2CMSR 0xC /* master status */
-#define I2CSIER 0x10 /* slave irq enable */
-#define I2CMIER 0x14 /* master irq enable */
-#define I2CCCR 0x18 /* clock dividers */
-#define I2CSAR 0x1c /* slave address */
-#define I2CMAR 0x20 /* master address */
-#define I2CRXTX 0x24 /* data port */
-#define I2CFCR 0x28 /* fifo control */
-#define I2CFSR 0x2C /* fifo status */
-#define I2CFIER 0x30 /* fifo irq enable */
-#define I2CRFDR 0x34 /* rx fifo count */
-#define I2CTFDR 0x38 /* tx fifo count */
-
-#define REGSIZE 0x3C
-
-#define MCR_MDBS 0x80 /* non-fifo mode switch */
-#define MCR_FSCL 0x40 /* override SCL pin */
-#define MCR_FSDA 0x20 /* override SDA pin */
-#define MCR_OBPC 0x10 /* override pins */
-#define MCR_MIE 0x08 /* master if enable */
-#define MCR_TSBE 0x04
-#define MCR_FSB 0x02 /* force stop bit */
-#define MCR_ESG 0x01 /* en startbit gen. */
-
-#define MSR_MNR 0x40 /* nack received */
-#define MSR_MAL 0x20 /* arbitration lost */
-#define MSR_MST 0x10 /* sent a stop */
-#define MSR_MDE 0x08
-#define MSR_MDT 0x04
-#define MSR_MDR 0x02
-#define MSR_MAT 0x01 /* slave addr xfer done */
-
-#define MIE_MNRE 0x40 /* nack irq en */
-#define MIE_MALE 0x20 /* arblos irq en */
-#define MIE_MSTE 0x10 /* stop irq en */
-#define MIE_MDEE 0x08
-#define MIE_MDTE 0x04
-#define MIE_MDRE 0x02
-#define MIE_MATE 0x01 /* address sent irq en */
-
-#define FCR_RFRST 0x02 /* reset rx fifo */
-#define FCR_TFRST 0x01 /* reset tx fifo */
-
-#define FSR_TEND 0x04 /* last byte sent */
-#define FSR_RDF 0x02 /* rx fifo trigger */
-#define FSR_TDFE 0x01 /* tx fifo empty */
-
-#define FIER_TEIE 0x04 /* tx fifo empty irq en */
-#define FIER_RXIE 0x02 /* rx fifo trig irq en */
-#define FIER_TXIE 0x01 /* tx fifo trig irq en */
-
-#define FIFO_SIZE 16
-
-struct cami2c {
- void __iomem *iobase;
- struct i2c_adapter adap;
-
- /* message processing */
- struct i2c_msg *msg;
-#define IDF_SEND 1
-#define IDF_RECV 2
-#define IDF_STOP 4
- int flags;
-
-#define IDS_DONE 1
-#define IDS_ARBLOST 2
-#define IDS_NACK 4
- int status;
- struct completion xfer_done;
-
- int irq;
- struct resource *ioarea;
-};
-
-static inline void OUT32(struct cami2c *cam, int reg, unsigned long val)
-{
- __raw_writel(val, (unsigned long)cam->iobase + reg);
-}
-
-static inline unsigned long IN32(struct cami2c *cam, int reg)
-{
- return __raw_readl((unsigned long)cam->iobase + reg);
-}
-
-static irqreturn_t sh7760_i2c_irq(int irq, void *ptr)
-{
- struct cami2c *id = ptr;
- struct i2c_msg *msg = id->msg;
- char *data = msg->buf;
- unsigned long msr, fsr, fier, len;
-
- msr = IN32(id, I2CMSR);
- fsr = IN32(id, I2CFSR);
-
- /* arbitration lost */
- if (msr & MSR_MAL) {
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_DONE | IDS_ARBLOST;
- goto out;
- }
-
- if (msr & MSR_MNR) {
- /* NACK handling is very screwed up. After receiving a
- * NAK IRQ one has to wait a bit before writing to any
- * registers, or the ctl will lock up. After that delay
- * do a normal i2c stop. Then wait at least 1 ms before
- * attempting another transfer or ctl will stop working
- */
- udelay(100); /* wait or risk ctl hang */
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CMIER, MIE_MSTE);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_NACK;
- msr &= ~MSR_MAT;
- fsr = 0;
- /* In some cases the MST bit is also set. */
- }
-
- /* i2c-stop was sent */
- if (msr & MSR_MST) {
- id->status |= IDS_DONE;
- goto out;
- }
-
- /* i2c slave addr was sent; set to "normal" operation */
- if (msr & MSR_MAT)
- OUT32(id, I2CMCR, MCR_MIE);
-
- fier = IN32(id, I2CFIER);
-
- if (fsr & FSR_RDF) {
- len = IN32(id, I2CRFDR);
- if (msg->len <= len) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- /* manual says: wait >= 0.5 SCL times */
- udelay(5);
- /* next int should be MST */
- } else {
- id->status |= IDS_DONE;
- /* keep the RDF bit: ctrl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_RDF;
- }
- }
- while (msg->len && len) {
- *data++ = IN32(id, I2CRXTX);
- msg->len--;
- len--;
- }
-
- if (msg->len) {
- len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1
- : msg->len - 1;
-
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4));
- }
-
- } else if (id->flags & IDF_SEND) {
- if ((fsr & FSR_TEND) && (msg->len < 1)) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- } else {
- id->status |= IDS_DONE;
- /* keep the TEND bit: ctl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_TEND;
- }
- }
- if (fsr & FSR_TDFE) {
- while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) {
- OUT32(id, I2CRXTX, *data++);
- msg->len--;
- }
-
- if (msg->len < 1) {
- fier &= ~FIER_TXIE;
- OUT32(id, I2CFIER, fier);
- } else {
- len = (msg->len >= FIFO_SIZE) ? 2 : 0;
- OUT32(id, I2CFCR,
- FCR_RFRST | ((len & 3) << 2));
- }
- }
- }
-out:
- if (id->status & IDS_DONE) {
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
- id->msg = NULL;
- complete(&id->xfer_done);
- }
- /* clear status flags and ctrl resumes work */
- OUT32(id, I2CMSR, ~msr);
- OUT32(id, I2CFSR, ~fsr);
- OUT32(id, I2CSSR, 0);
-
- return IRQ_HANDLED;
-}
-
-
-/* prepare and start a master receive operation */
-static void sh7760_i2c_mrecv(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_RECV;
-
- /* set the slave addr reg; otherwise rcv wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 1);
-
- /* adjust rx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = FIFO_SIZE - 1; /* trigger at fifo full */
- else
- len = id->msg->len - 1; /* trigger before all received */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4));
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_RXIE);
-}
-
-/* prepare and start a master send operation */
-static void sh7760_i2c_msend(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_SEND;
-
- /* set the slave addr reg; otherwise xmit wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 0);
-
- /* adjust tx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = 2; /* trig: 2 bytes left in TX fifo */
- else
- len = 0; /* trig: 8 bytes left in TX fifo */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2));
-
- while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) {
- OUT32(id, I2CRXTX, *(id->msg->buf));
- (id->msg->len)--;
- (id->msg->buf)++;
- }
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CFSR, 0);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0));
-}
-
-static inline int sh7760_i2c_busy_check(struct cami2c *id)
-{
- return (IN32(id, I2CMCR) & MCR_FSDA);
-}
-
-static int sh7760_i2c_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct cami2c *id = adap->algo_data;
- int i, retr;
-
- if (sh7760_i2c_busy_check(id)) {
- dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr);
- return -EBUSY;
- }
-
- i = 0;
- while (i < num) {
- retr = adap->retries;
-retry:
- id->flags = ((i == (num-1)) ? IDF_STOP : 0);
- id->status = 0;
- id->msg = msgs;
- init_completion(&id->xfer_done);
-
- if (msgs->flags & I2C_M_RD)
- sh7760_i2c_mrecv(id);
- else
- sh7760_i2c_msend(id);
-
- wait_for_completion(&id->xfer_done);
-
- if (id->status == 0) {
- num = -EIO;
- break;
- }
-
- if (id->status & IDS_NACK) {
- /* wait a bit or i2c module stops working */
- mdelay(1);
- num = -EREMOTEIO;
- break;
- }
-
- if (id->status & IDS_ARBLOST) {
- if (retr--) {
- mdelay(2);
- goto retry;
- }
- num = -EREMOTEIO;
- break;
- }
-
- msgs++;
- i++;
- }
-
- id->msg = NULL;
- id->flags = 0;
- id->status = 0;
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
-
- /* reset slave module registers too: master mode enables slave
- * module for receive ops (ack, data). Without this reset,
- * eternal bus activity might be reported after NACK / ARBLOST.
- */
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSSR, 0);
-
- return num;
-}
-
-static u32 sh7760_i2c_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
-}
-
-static const struct i2c_algorithm sh7760_i2c_algo = {
- .master_xfer = sh7760_i2c_master_xfer,
- .functionality = sh7760_i2c_func,
-};
-
-/* calculate CCR register setting for a desired scl clock. SCL clock is
- * derived from I2C module clock (iclk) which in turn is derived from
- * peripheral module clock (mclk, usually around 33MHz):
- * iclk = mclk/(CDF + 1). iclk must be < 20MHz.
- * scl = iclk/(SCGD*8 + 20).
- */
-static int calc_CCR(unsigned long scl_hz)
-{
- struct clk *mclk;
- unsigned long mck, m1, dff, odff, iclk;
- signed char cdf, cdfm;
- int scgd, scgdm, scgds;
-
- mclk = clk_get(NULL, "peripheral_clk");
- if (IS_ERR(mclk)) {
- return PTR_ERR(mclk);
- } else {
- mck = mclk->rate;
- clk_put(mclk);
- }
-
- odff = scl_hz;
- scgdm = cdfm = m1 = 0;
- for (cdf = 3; cdf >= 0; cdf--) {
- iclk = mck / (1 + cdf);
- if (iclk >= 20000000)
- continue;
- scgds = ((iclk / scl_hz) - 20) >> 3;
- for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) {
- m1 = iclk / (20 + (scgd << 3));
- dff = abs(scl_hz - m1);
- if (dff < odff) {
- odff = dff;
- cdfm = cdf;
- scgdm = scgd;
- }
- }
- }
- /* fail if more than 25% off of requested SCL */
- if (odff > (scl_hz >> 2))
- return -EINVAL;
-
- /* create a CCR register value */
- return ((scgdm << 2) | cdfm);
-}
-
-static int sh7760_i2c_probe(struct platform_device *pdev)
-{
- struct sh7760_i2c_platdata *pd;
- struct resource *res;
- struct cami2c *id;
- int ret;
-
- pd = dev_get_platdata(&pdev->dev);
- if (!pd) {
- dev_err(&pdev->dev, "no platform_data!\n");
- ret = -ENODEV;
- goto out0;
- }
-
- id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
- if (!id) {
- dev_err(&pdev->dev, "no mem for private data\n");
- ret = -ENOMEM;
- goto out0;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no mmio resources\n");
- ret = -ENODEV;
- goto out1;
- }
-
- id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name);
- if (!id->ioarea) {
- dev_err(&pdev->dev, "mmio already reserved\n");
- ret = -EBUSY;
- goto out1;
- }
-
- id->iobase = ioremap(res->start, REGSIZE);
- if (!id->iobase) {
- dev_err(&pdev->dev, "cannot ioremap\n");
- ret = -ENODEV;
- goto out2;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto out3;
- id->irq = ret;
-
- id->adap.nr = pdev->id;
- id->adap.algo = &sh7760_i2c_algo;
- id->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- id->adap.retries = 3;
- id->adap.algo_data = id;
- id->adap.dev.parent = &pdev->dev;
- snprintf(id->adap.name, sizeof(id->adap.name),
- "SH7760 I2C at %08lx", (unsigned long)res->start);
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CMAR, 0);
- OUT32(id, I2CSIER, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSSR, 0);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFSR, 0);
-
- ret = calc_CCR(pd->speed_khz * 1000);
- if (ret < 0) {
- dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n",
- pd->speed_khz);
- goto out3;
- }
- OUT32(id, I2CCCR, ret);
-
- if (request_irq(id->irq, sh7760_i2c_irq, 0,
- SH7760_I2C_DEVNAME, id)) {
- dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
- ret = -EBUSY;
- goto out3;
- }
-
- ret = i2c_add_numbered_adapter(&id->adap);
- if (ret < 0)
- goto out4;
-
- platform_set_drvdata(pdev, id);
-
- dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n",
- pd->speed_khz, res->start, id->irq);
-
- return 0;
-
-out4:
- free_irq(id->irq, id);
-out3:
- iounmap(id->iobase);
-out2:
- release_resource(id->ioarea);
- kfree(id->ioarea);
-out1:
- kfree(id);
-out0:
- return ret;
-}
-
-static int sh7760_i2c_remove(struct platform_device *pdev)
-{
- struct cami2c *id = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&id->adap);
- free_irq(id->irq, id);
- iounmap(id->iobase);
- release_resource(id->ioarea);
- kfree(id->ioarea);
- kfree(id);
-
- return 0;
-}
-
-static struct platform_driver sh7760_i2c_drv = {
- .driver = {
- .name = SH7760_I2C_DEVNAME,
- },
- .probe = sh7760_i2c_probe,
- .remove = sh7760_i2c_remove,
-};
-
-module_platform_driver(sh7760_i2c_drv);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SH7760 I2C bus driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 09/22] i2c: remove i2c-sh7760
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/i2c/busses/Kconfig | 9 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-sh7760.c | 565 --------------------------------
3 files changed, 575 deletions(-)
delete mode 100644 drivers/i2c/busses/i2c-sh7760.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 22602c512a6e50..44267a023fd19a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1016,15 +1016,6 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung SoCs (S3C, S5Pv210, Exynos).
-config I2C_SH7760
- tristate "Renesas SH7760 I2C Controller"
- depends on CPU_SUBTYPE_SH7760
- help
- This driver supports the 2 I2C interfaces on the Renesas SH7760.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-sh7760.
-
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e73cdb1d2b5a85..6be213e5e4dd16 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -104,7 +104,6 @@ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
obj-$(CONFIG_I2C_RZV2M) += i2c-rzv2m.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
-obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
deleted file mode 100644
index 319d1fa617c883..00000000000000
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * I2C bus driver for the SH7760 I2C Interfaces.
- *
- * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- *
- * licensed under the terms outlined in the file COPYING.
- *
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/i2c-sh7760.h>
-
-/* register offsets */
-#define I2CSCR 0x0 /* slave ctrl */
-#define I2CMCR 0x4 /* master ctrl */
-#define I2CSSR 0x8 /* slave status */
-#define I2CMSR 0xC /* master status */
-#define I2CSIER 0x10 /* slave irq enable */
-#define I2CMIER 0x14 /* master irq enable */
-#define I2CCCR 0x18 /* clock dividers */
-#define I2CSAR 0x1c /* slave address */
-#define I2CMAR 0x20 /* master address */
-#define I2CRXTX 0x24 /* data port */
-#define I2CFCR 0x28 /* fifo control */
-#define I2CFSR 0x2C /* fifo status */
-#define I2CFIER 0x30 /* fifo irq enable */
-#define I2CRFDR 0x34 /* rx fifo count */
-#define I2CTFDR 0x38 /* tx fifo count */
-
-#define REGSIZE 0x3C
-
-#define MCR_MDBS 0x80 /* non-fifo mode switch */
-#define MCR_FSCL 0x40 /* override SCL pin */
-#define MCR_FSDA 0x20 /* override SDA pin */
-#define MCR_OBPC 0x10 /* override pins */
-#define MCR_MIE 0x08 /* master if enable */
-#define MCR_TSBE 0x04
-#define MCR_FSB 0x02 /* force stop bit */
-#define MCR_ESG 0x01 /* en startbit gen. */
-
-#define MSR_MNR 0x40 /* nack received */
-#define MSR_MAL 0x20 /* arbitration lost */
-#define MSR_MST 0x10 /* sent a stop */
-#define MSR_MDE 0x08
-#define MSR_MDT 0x04
-#define MSR_MDR 0x02
-#define MSR_MAT 0x01 /* slave addr xfer done */
-
-#define MIE_MNRE 0x40 /* nack irq en */
-#define MIE_MALE 0x20 /* arblos irq en */
-#define MIE_MSTE 0x10 /* stop irq en */
-#define MIE_MDEE 0x08
-#define MIE_MDTE 0x04
-#define MIE_MDRE 0x02
-#define MIE_MATE 0x01 /* address sent irq en */
-
-#define FCR_RFRST 0x02 /* reset rx fifo */
-#define FCR_TFRST 0x01 /* reset tx fifo */
-
-#define FSR_TEND 0x04 /* last byte sent */
-#define FSR_RDF 0x02 /* rx fifo trigger */
-#define FSR_TDFE 0x01 /* tx fifo empty */
-
-#define FIER_TEIE 0x04 /* tx fifo empty irq en */
-#define FIER_RXIE 0x02 /* rx fifo trig irq en */
-#define FIER_TXIE 0x01 /* tx fifo trig irq en */
-
-#define FIFO_SIZE 16
-
-struct cami2c {
- void __iomem *iobase;
- struct i2c_adapter adap;
-
- /* message processing */
- struct i2c_msg *msg;
-#define IDF_SEND 1
-#define IDF_RECV 2
-#define IDF_STOP 4
- int flags;
-
-#define IDS_DONE 1
-#define IDS_ARBLOST 2
-#define IDS_NACK 4
- int status;
- struct completion xfer_done;
-
- int irq;
- struct resource *ioarea;
-};
-
-static inline void OUT32(struct cami2c *cam, int reg, unsigned long val)
-{
- __raw_writel(val, (unsigned long)cam->iobase + reg);
-}
-
-static inline unsigned long IN32(struct cami2c *cam, int reg)
-{
- return __raw_readl((unsigned long)cam->iobase + reg);
-}
-
-static irqreturn_t sh7760_i2c_irq(int irq, void *ptr)
-{
- struct cami2c *id = ptr;
- struct i2c_msg *msg = id->msg;
- char *data = msg->buf;
- unsigned long msr, fsr, fier, len;
-
- msr = IN32(id, I2CMSR);
- fsr = IN32(id, I2CFSR);
-
- /* arbitration lost */
- if (msr & MSR_MAL) {
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_DONE | IDS_ARBLOST;
- goto out;
- }
-
- if (msr & MSR_MNR) {
- /* NACK handling is very screwed up. After receiving a
- * NAK IRQ one has to wait a bit before writing to any
- * registers, or the ctl will lock up. After that delay
- * do a normal i2c stop. Then wait at least 1 ms before
- * attempting another transfer or ctl will stop working
- */
- udelay(100); /* wait or risk ctl hang */
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CMIER, MIE_MSTE);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_NACK;
- msr &= ~MSR_MAT;
- fsr = 0;
- /* In some cases the MST bit is also set. */
- }
-
- /* i2c-stop was sent */
- if (msr & MSR_MST) {
- id->status |= IDS_DONE;
- goto out;
- }
-
- /* i2c slave addr was sent; set to "normal" operation */
- if (msr & MSR_MAT)
- OUT32(id, I2CMCR, MCR_MIE);
-
- fier = IN32(id, I2CFIER);
-
- if (fsr & FSR_RDF) {
- len = IN32(id, I2CRFDR);
- if (msg->len <= len) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- /* manual says: wait >= 0.5 SCL times */
- udelay(5);
- /* next int should be MST */
- } else {
- id->status |= IDS_DONE;
- /* keep the RDF bit: ctrl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_RDF;
- }
- }
- while (msg->len && len) {
- *data++ = IN32(id, I2CRXTX);
- msg->len--;
- len--;
- }
-
- if (msg->len) {
- len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1
- : msg->len - 1;
-
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4));
- }
-
- } else if (id->flags & IDF_SEND) {
- if ((fsr & FSR_TEND) && (msg->len < 1)) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- } else {
- id->status |= IDS_DONE;
- /* keep the TEND bit: ctl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_TEND;
- }
- }
- if (fsr & FSR_TDFE) {
- while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) {
- OUT32(id, I2CRXTX, *data++);
- msg->len--;
- }
-
- if (msg->len < 1) {
- fier &= ~FIER_TXIE;
- OUT32(id, I2CFIER, fier);
- } else {
- len = (msg->len >= FIFO_SIZE) ? 2 : 0;
- OUT32(id, I2CFCR,
- FCR_RFRST | ((len & 3) << 2));
- }
- }
- }
-out:
- if (id->status & IDS_DONE) {
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
- id->msg = NULL;
- complete(&id->xfer_done);
- }
- /* clear status flags and ctrl resumes work */
- OUT32(id, I2CMSR, ~msr);
- OUT32(id, I2CFSR, ~fsr);
- OUT32(id, I2CSSR, 0);
-
- return IRQ_HANDLED;
-}
-
-
-/* prepare and start a master receive operation */
-static void sh7760_i2c_mrecv(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_RECV;
-
- /* set the slave addr reg; otherwise rcv wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 1);
-
- /* adjust rx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = FIFO_SIZE - 1; /* trigger at fifo full */
- else
- len = id->msg->len - 1; /* trigger before all received */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4));
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_RXIE);
-}
-
-/* prepare and start a master send operation */
-static void sh7760_i2c_msend(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_SEND;
-
- /* set the slave addr reg; otherwise xmit wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 0);
-
- /* adjust tx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = 2; /* trig: 2 bytes left in TX fifo */
- else
- len = 0; /* trig: 8 bytes left in TX fifo */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2));
-
- while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) {
- OUT32(id, I2CRXTX, *(id->msg->buf));
- (id->msg->len)--;
- (id->msg->buf)++;
- }
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CFSR, 0);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0));
-}
-
-static inline int sh7760_i2c_busy_check(struct cami2c *id)
-{
- return (IN32(id, I2CMCR) & MCR_FSDA);
-}
-
-static int sh7760_i2c_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct cami2c *id = adap->algo_data;
- int i, retr;
-
- if (sh7760_i2c_busy_check(id)) {
- dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr);
- return -EBUSY;
- }
-
- i = 0;
- while (i < num) {
- retr = adap->retries;
-retry:
- id->flags = ((i == (num-1)) ? IDF_STOP : 0);
- id->status = 0;
- id->msg = msgs;
- init_completion(&id->xfer_done);
-
- if (msgs->flags & I2C_M_RD)
- sh7760_i2c_mrecv(id);
- else
- sh7760_i2c_msend(id);
-
- wait_for_completion(&id->xfer_done);
-
- if (id->status == 0) {
- num = -EIO;
- break;
- }
-
- if (id->status & IDS_NACK) {
- /* wait a bit or i2c module stops working */
- mdelay(1);
- num = -EREMOTEIO;
- break;
- }
-
- if (id->status & IDS_ARBLOST) {
- if (retr--) {
- mdelay(2);
- goto retry;
- }
- num = -EREMOTEIO;
- break;
- }
-
- msgs++;
- i++;
- }
-
- id->msg = NULL;
- id->flags = 0;
- id->status = 0;
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
-
- /* reset slave module registers too: master mode enables slave
- * module for receive ops (ack, data). Without this reset,
- * eternal bus activity might be reported after NACK / ARBLOST.
- */
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSSR, 0);
-
- return num;
-}
-
-static u32 sh7760_i2c_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
-}
-
-static const struct i2c_algorithm sh7760_i2c_algo = {
- .master_xfer = sh7760_i2c_master_xfer,
- .functionality = sh7760_i2c_func,
-};
-
-/* calculate CCR register setting for a desired scl clock. SCL clock is
- * derived from I2C module clock (iclk) which in turn is derived from
- * peripheral module clock (mclk, usually around 33MHz):
- * iclk = mclk/(CDF + 1). iclk must be < 20MHz.
- * scl = iclk/(SCGD*8 + 20).
- */
-static int calc_CCR(unsigned long scl_hz)
-{
- struct clk *mclk;
- unsigned long mck, m1, dff, odff, iclk;
- signed char cdf, cdfm;
- int scgd, scgdm, scgds;
-
- mclk = clk_get(NULL, "peripheral_clk");
- if (IS_ERR(mclk)) {
- return PTR_ERR(mclk);
- } else {
- mck = mclk->rate;
- clk_put(mclk);
- }
-
- odff = scl_hz;
- scgdm = cdfm = m1 = 0;
- for (cdf = 3; cdf >= 0; cdf--) {
- iclk = mck / (1 + cdf);
- if (iclk >= 20000000)
- continue;
- scgds = ((iclk / scl_hz) - 20) >> 3;
- for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) {
- m1 = iclk / (20 + (scgd << 3));
- dff = abs(scl_hz - m1);
- if (dff < odff) {
- odff = dff;
- cdfm = cdf;
- scgdm = scgd;
- }
- }
- }
- /* fail if more than 25% off of requested SCL */
- if (odff > (scl_hz >> 2))
- return -EINVAL;
-
- /* create a CCR register value */
- return ((scgdm << 2) | cdfm);
-}
-
-static int sh7760_i2c_probe(struct platform_device *pdev)
-{
- struct sh7760_i2c_platdata *pd;
- struct resource *res;
- struct cami2c *id;
- int ret;
-
- pd = dev_get_platdata(&pdev->dev);
- if (!pd) {
- dev_err(&pdev->dev, "no platform_data!\n");
- ret = -ENODEV;
- goto out0;
- }
-
- id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
- if (!id) {
- dev_err(&pdev->dev, "no mem for private data\n");
- ret = -ENOMEM;
- goto out0;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no mmio resources\n");
- ret = -ENODEV;
- goto out1;
- }
-
- id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name);
- if (!id->ioarea) {
- dev_err(&pdev->dev, "mmio already reserved\n");
- ret = -EBUSY;
- goto out1;
- }
-
- id->iobase = ioremap(res->start, REGSIZE);
- if (!id->iobase) {
- dev_err(&pdev->dev, "cannot ioremap\n");
- ret = -ENODEV;
- goto out2;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto out3;
- id->irq = ret;
-
- id->adap.nr = pdev->id;
- id->adap.algo = &sh7760_i2c_algo;
- id->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- id->adap.retries = 3;
- id->adap.algo_data = id;
- id->adap.dev.parent = &pdev->dev;
- snprintf(id->adap.name, sizeof(id->adap.name),
- "SH7760 I2C at %08lx", (unsigned long)res->start);
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CMAR, 0);
- OUT32(id, I2CSIER, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSSR, 0);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFSR, 0);
-
- ret = calc_CCR(pd->speed_khz * 1000);
- if (ret < 0) {
- dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n",
- pd->speed_khz);
- goto out3;
- }
- OUT32(id, I2CCCR, ret);
-
- if (request_irq(id->irq, sh7760_i2c_irq, 0,
- SH7760_I2C_DEVNAME, id)) {
- dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
- ret = -EBUSY;
- goto out3;
- }
-
- ret = i2c_add_numbered_adapter(&id->adap);
- if (ret < 0)
- goto out4;
-
- platform_set_drvdata(pdev, id);
-
- dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n",
- pd->speed_khz, res->start, id->irq);
-
- return 0;
-
-out4:
- free_irq(id->irq, id);
-out3:
- iounmap(id->iobase);
-out2:
- release_resource(id->ioarea);
- kfree(id->ioarea);
-out1:
- kfree(id);
-out0:
- return ret;
-}
-
-static int sh7760_i2c_remove(struct platform_device *pdev)
-{
- struct cami2c *id = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&id->adap);
- free_irq(id->irq, id);
- iounmap(id->iobase);
- release_resource(id->ioarea);
- kfree(id->ioarea);
- kfree(id);
-
- return 0;
-}
-
-static struct platform_driver sh7760_i2c_drv = {
- .driver = {
- .name = SH7760_I2C_DEVNAME,
- },
- .probe = sh7760_i2c_probe,
- .remove = sh7760_i2c_remove,
-};
-
-module_platform_driver(sh7760_i2c_drv);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SH7760 I2C bus driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 09/22] i2c: remove i2c-sh7760
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/i2c/busses/Kconfig | 9 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-sh7760.c | 565 --------------------------------
3 files changed, 575 deletions(-)
delete mode 100644 drivers/i2c/busses/i2c-sh7760.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 22602c512a6e50..44267a023fd19a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1016,15 +1016,6 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung SoCs (S3C, S5Pv210, Exynos).
-config I2C_SH7760
- tristate "Renesas SH7760 I2C Controller"
- depends on CPU_SUBTYPE_SH7760
- help
- This driver supports the 2 I2C interfaces on the Renesas SH7760.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-sh7760.
-
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e73cdb1d2b5a85..6be213e5e4dd16 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -104,7 +104,6 @@ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
obj-$(CONFIG_I2C_RZV2M) += i2c-rzv2m.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
-obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
deleted file mode 100644
index 319d1fa617c883..00000000000000
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * I2C bus driver for the SH7760 I2C Interfaces.
- *
- * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
- *
- * licensed under the terms outlined in the file COPYING.
- *
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/i2c-sh7760.h>
-
-/* register offsets */
-#define I2CSCR 0x0 /* slave ctrl */
-#define I2CMCR 0x4 /* master ctrl */
-#define I2CSSR 0x8 /* slave status */
-#define I2CMSR 0xC /* master status */
-#define I2CSIER 0x10 /* slave irq enable */
-#define I2CMIER 0x14 /* master irq enable */
-#define I2CCCR 0x18 /* clock dividers */
-#define I2CSAR 0x1c /* slave address */
-#define I2CMAR 0x20 /* master address */
-#define I2CRXTX 0x24 /* data port */
-#define I2CFCR 0x28 /* fifo control */
-#define I2CFSR 0x2C /* fifo status */
-#define I2CFIER 0x30 /* fifo irq enable */
-#define I2CRFDR 0x34 /* rx fifo count */
-#define I2CTFDR 0x38 /* tx fifo count */
-
-#define REGSIZE 0x3C
-
-#define MCR_MDBS 0x80 /* non-fifo mode switch */
-#define MCR_FSCL 0x40 /* override SCL pin */
-#define MCR_FSDA 0x20 /* override SDA pin */
-#define MCR_OBPC 0x10 /* override pins */
-#define MCR_MIE 0x08 /* master if enable */
-#define MCR_TSBE 0x04
-#define MCR_FSB 0x02 /* force stop bit */
-#define MCR_ESG 0x01 /* en startbit gen. */
-
-#define MSR_MNR 0x40 /* nack received */
-#define MSR_MAL 0x20 /* arbitration lost */
-#define MSR_MST 0x10 /* sent a stop */
-#define MSR_MDE 0x08
-#define MSR_MDT 0x04
-#define MSR_MDR 0x02
-#define MSR_MAT 0x01 /* slave addr xfer done */
-
-#define MIE_MNRE 0x40 /* nack irq en */
-#define MIE_MALE 0x20 /* arblos irq en */
-#define MIE_MSTE 0x10 /* stop irq en */
-#define MIE_MDEE 0x08
-#define MIE_MDTE 0x04
-#define MIE_MDRE 0x02
-#define MIE_MATE 0x01 /* address sent irq en */
-
-#define FCR_RFRST 0x02 /* reset rx fifo */
-#define FCR_TFRST 0x01 /* reset tx fifo */
-
-#define FSR_TEND 0x04 /* last byte sent */
-#define FSR_RDF 0x02 /* rx fifo trigger */
-#define FSR_TDFE 0x01 /* tx fifo empty */
-
-#define FIER_TEIE 0x04 /* tx fifo empty irq en */
-#define FIER_RXIE 0x02 /* rx fifo trig irq en */
-#define FIER_TXIE 0x01 /* tx fifo trig irq en */
-
-#define FIFO_SIZE 16
-
-struct cami2c {
- void __iomem *iobase;
- struct i2c_adapter adap;
-
- /* message processing */
- struct i2c_msg *msg;
-#define IDF_SEND 1
-#define IDF_RECV 2
-#define IDF_STOP 4
- int flags;
-
-#define IDS_DONE 1
-#define IDS_ARBLOST 2
-#define IDS_NACK 4
- int status;
- struct completion xfer_done;
-
- int irq;
- struct resource *ioarea;
-};
-
-static inline void OUT32(struct cami2c *cam, int reg, unsigned long val)
-{
- __raw_writel(val, (unsigned long)cam->iobase + reg);
-}
-
-static inline unsigned long IN32(struct cami2c *cam, int reg)
-{
- return __raw_readl((unsigned long)cam->iobase + reg);
-}
-
-static irqreturn_t sh7760_i2c_irq(int irq, void *ptr)
-{
- struct cami2c *id = ptr;
- struct i2c_msg *msg = id->msg;
- char *data = msg->buf;
- unsigned long msr, fsr, fier, len;
-
- msr = IN32(id, I2CMSR);
- fsr = IN32(id, I2CFSR);
-
- /* arbitration lost */
- if (msr & MSR_MAL) {
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_DONE | IDS_ARBLOST;
- goto out;
- }
-
- if (msr & MSR_MNR) {
- /* NACK handling is very screwed up. After receiving a
- * NAK IRQ one has to wait a bit before writing to any
- * registers, or the ctl will lock up. After that delay
- * do a normal i2c stop. Then wait at least 1 ms before
- * attempting another transfer or ctl will stop working
- */
- udelay(100); /* wait or risk ctl hang */
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CMIER, MIE_MSTE);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- id->status |= IDS_NACK;
- msr &= ~MSR_MAT;
- fsr = 0;
- /* In some cases the MST bit is also set. */
- }
-
- /* i2c-stop was sent */
- if (msr & MSR_MST) {
- id->status |= IDS_DONE;
- goto out;
- }
-
- /* i2c slave addr was sent; set to "normal" operation */
- if (msr & MSR_MAT)
- OUT32(id, I2CMCR, MCR_MIE);
-
- fier = IN32(id, I2CFIER);
-
- if (fsr & FSR_RDF) {
- len = IN32(id, I2CRFDR);
- if (msg->len <= len) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- OUT32(id, I2CFIER, 0);
- /* manual says: wait >= 0.5 SCL times */
- udelay(5);
- /* next int should be MST */
- } else {
- id->status |= IDS_DONE;
- /* keep the RDF bit: ctrl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_RDF;
- }
- }
- while (msg->len && len) {
- *data++ = IN32(id, I2CRXTX);
- msg->len--;
- len--;
- }
-
- if (msg->len) {
- len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1
- : msg->len - 1;
-
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4));
- }
-
- } else if (id->flags & IDF_SEND) {
- if ((fsr & FSR_TEND) && (msg->len < 1)) {
- if (id->flags & IDF_STOP) {
- OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
- } else {
- id->status |= IDS_DONE;
- /* keep the TEND bit: ctl holds SCL low
- * until the setup for the next i2c_msg
- * clears this bit.
- */
- fsr &= ~FSR_TEND;
- }
- }
- if (fsr & FSR_TDFE) {
- while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) {
- OUT32(id, I2CRXTX, *data++);
- msg->len--;
- }
-
- if (msg->len < 1) {
- fier &= ~FIER_TXIE;
- OUT32(id, I2CFIER, fier);
- } else {
- len = (msg->len >= FIFO_SIZE) ? 2 : 0;
- OUT32(id, I2CFCR,
- FCR_RFRST | ((len & 3) << 2));
- }
- }
- }
-out:
- if (id->status & IDS_DONE) {
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
- id->msg = NULL;
- complete(&id->xfer_done);
- }
- /* clear status flags and ctrl resumes work */
- OUT32(id, I2CMSR, ~msr);
- OUT32(id, I2CFSR, ~fsr);
- OUT32(id, I2CSSR, 0);
-
- return IRQ_HANDLED;
-}
-
-
-/* prepare and start a master receive operation */
-static void sh7760_i2c_mrecv(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_RECV;
-
- /* set the slave addr reg; otherwise rcv wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 1);
-
- /* adjust rx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = FIFO_SIZE - 1; /* trigger at fifo full */
- else
- len = id->msg->len - 1; /* trigger before all received */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4));
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_RXIE);
-}
-
-/* prepare and start a master send operation */
-static void sh7760_i2c_msend(struct cami2c *id)
-{
- int len;
-
- id->flags |= IDF_SEND;
-
- /* set the slave addr reg; otherwise xmit wont work! */
- OUT32(id, I2CSAR, 0xfe);
- OUT32(id, I2CMAR, (id->msg->addr << 1) | 0);
-
- /* adjust tx fifo trigger */
- if (id->msg->len >= FIFO_SIZE)
- len = 2; /* trig: 2 bytes left in TX fifo */
- else
- len = 0; /* trig: 8 bytes left in TX fifo */
-
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2));
-
- while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) {
- OUT32(id, I2CRXTX, *(id->msg->buf));
- (id->msg->len)--;
- (id->msg->buf)++;
- }
-
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
- OUT32(id, I2CFSR, 0);
- OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
- OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0));
-}
-
-static inline int sh7760_i2c_busy_check(struct cami2c *id)
-{
- return (IN32(id, I2CMCR) & MCR_FSDA);
-}
-
-static int sh7760_i2c_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct cami2c *id = adap->algo_data;
- int i, retr;
-
- if (sh7760_i2c_busy_check(id)) {
- dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr);
- return -EBUSY;
- }
-
- i = 0;
- while (i < num) {
- retr = adap->retries;
-retry:
- id->flags = ((i == (num-1)) ? IDF_STOP : 0);
- id->status = 0;
- id->msg = msgs;
- init_completion(&id->xfer_done);
-
- if (msgs->flags & I2C_M_RD)
- sh7760_i2c_mrecv(id);
- else
- sh7760_i2c_msend(id);
-
- wait_for_completion(&id->xfer_done);
-
- if (id->status == 0) {
- num = -EIO;
- break;
- }
-
- if (id->status & IDS_NACK) {
- /* wait a bit or i2c module stops working */
- mdelay(1);
- num = -EREMOTEIO;
- break;
- }
-
- if (id->status & IDS_ARBLOST) {
- if (retr--) {
- mdelay(2);
- goto retry;
- }
- num = -EREMOTEIO;
- break;
- }
-
- msgs++;
- i++;
- }
-
- id->msg = NULL;
- id->flags = 0;
- id->status = 0;
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CFIER, 0);
-
- /* reset slave module registers too: master mode enables slave
- * module for receive ops (ack, data). Without this reset,
- * eternal bus activity might be reported after NACK / ARBLOST.
- */
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSSR, 0);
-
- return num;
-}
-
-static u32 sh7760_i2c_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
-}
-
-static const struct i2c_algorithm sh7760_i2c_algo = {
- .master_xfer = sh7760_i2c_master_xfer,
- .functionality = sh7760_i2c_func,
-};
-
-/* calculate CCR register setting for a desired scl clock. SCL clock is
- * derived from I2C module clock (iclk) which in turn is derived from
- * peripheral module clock (mclk, usually around 33MHz):
- * iclk = mclk/(CDF + 1). iclk must be < 20MHz.
- * scl = iclk/(SCGD*8 + 20).
- */
-static int calc_CCR(unsigned long scl_hz)
-{
- struct clk *mclk;
- unsigned long mck, m1, dff, odff, iclk;
- signed char cdf, cdfm;
- int scgd, scgdm, scgds;
-
- mclk = clk_get(NULL, "peripheral_clk");
- if (IS_ERR(mclk)) {
- return PTR_ERR(mclk);
- } else {
- mck = mclk->rate;
- clk_put(mclk);
- }
-
- odff = scl_hz;
- scgdm = cdfm = m1 = 0;
- for (cdf = 3; cdf >= 0; cdf--) {
- iclk = mck / (1 + cdf);
- if (iclk >= 20000000)
- continue;
- scgds = ((iclk / scl_hz) - 20) >> 3;
- for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) {
- m1 = iclk / (20 + (scgd << 3));
- dff = abs(scl_hz - m1);
- if (dff < odff) {
- odff = dff;
- cdfm = cdf;
- scgdm = scgd;
- }
- }
- }
- /* fail if more than 25% off of requested SCL */
- if (odff > (scl_hz >> 2))
- return -EINVAL;
-
- /* create a CCR register value */
- return ((scgdm << 2) | cdfm);
-}
-
-static int sh7760_i2c_probe(struct platform_device *pdev)
-{
- struct sh7760_i2c_platdata *pd;
- struct resource *res;
- struct cami2c *id;
- int ret;
-
- pd = dev_get_platdata(&pdev->dev);
- if (!pd) {
- dev_err(&pdev->dev, "no platform_data!\n");
- ret = -ENODEV;
- goto out0;
- }
-
- id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
- if (!id) {
- dev_err(&pdev->dev, "no mem for private data\n");
- ret = -ENOMEM;
- goto out0;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no mmio resources\n");
- ret = -ENODEV;
- goto out1;
- }
-
- id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name);
- if (!id->ioarea) {
- dev_err(&pdev->dev, "mmio already reserved\n");
- ret = -EBUSY;
- goto out1;
- }
-
- id->iobase = ioremap(res->start, REGSIZE);
- if (!id->iobase) {
- dev_err(&pdev->dev, "cannot ioremap\n");
- ret = -ENODEV;
- goto out2;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- goto out3;
- id->irq = ret;
-
- id->adap.nr = pdev->id;
- id->adap.algo = &sh7760_i2c_algo;
- id->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- id->adap.retries = 3;
- id->adap.algo_data = id;
- id->adap.dev.parent = &pdev->dev;
- snprintf(id->adap.name, sizeof(id->adap.name),
- "SH7760 I2C at %08lx", (unsigned long)res->start);
-
- OUT32(id, I2CMCR, 0);
- OUT32(id, I2CMSR, 0);
- OUT32(id, I2CMIER, 0);
- OUT32(id, I2CMAR, 0);
- OUT32(id, I2CSIER, 0);
- OUT32(id, I2CSAR, 0);
- OUT32(id, I2CSCR, 0);
- OUT32(id, I2CSSR, 0);
- OUT32(id, I2CFIER, 0);
- OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
- OUT32(id, I2CFSR, 0);
-
- ret = calc_CCR(pd->speed_khz * 1000);
- if (ret < 0) {
- dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n",
- pd->speed_khz);
- goto out3;
- }
- OUT32(id, I2CCCR, ret);
-
- if (request_irq(id->irq, sh7760_i2c_irq, 0,
- SH7760_I2C_DEVNAME, id)) {
- dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
- ret = -EBUSY;
- goto out3;
- }
-
- ret = i2c_add_numbered_adapter(&id->adap);
- if (ret < 0)
- goto out4;
-
- platform_set_drvdata(pdev, id);
-
- dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n",
- pd->speed_khz, res->start, id->irq);
-
- return 0;
-
-out4:
- free_irq(id->irq, id);
-out3:
- iounmap(id->iobase);
-out2:
- release_resource(id->ioarea);
- kfree(id->ioarea);
-out1:
- kfree(id);
-out0:
- return ret;
-}
-
-static int sh7760_i2c_remove(struct platform_device *pdev)
-{
- struct cami2c *id = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&id->adap);
- free_irq(id->irq, id);
- iounmap(id->iobase);
- release_resource(id->ioarea);
- kfree(id->ioarea);
- kfree(id);
-
- return 0;
-}
-
-static struct platform_driver sh7760_i2c_drv = {
- .driver = {
- .name = SH7760_I2C_DEVNAME,
- },
- .probe = sh7760_i2c_probe,
- .remove = sh7760_i2c_remove,
-};
-
-module_platform_driver(sh7760_i2c_drv);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SH7760 I2C bus driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 10/22] input: remove sh_keysc
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/input/keyboard/Kconfig | 10 -
drivers/input/keyboard/Makefile | 1 -
drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
3 files changed, 345 deletions(-)
delete mode 100644 drivers/input/keyboard/sh_keysc.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 84490915ae4d5a..882ec5fef214ac 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
To compile this driver as a module, choose M here: the
module will be called sunkbd.
-config KEYBOARD_SH_KEYSC
- tristate "SuperH KEYSC keypad support"
- depends on ARCH_SHMOBILE || COMPILE_TEST
- help
- Say Y here if you want to use a keypad attached to the KEYSC block
- on SuperH processors such as sh7722 and sh7343.
-
- To compile this driver as a module, choose M here: the
- module will be called sh_keysc.
-
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 5f67196bb2c1ea..8aba0b052b4504 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -60,7 +60,6 @@ obj-$(CONFIG_KEYBOARD_QT1050) += qt1050.o
obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
-obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
deleted file mode 100644
index 2c00320f739fc1..00000000000000
--- a/drivers/input/keyboard/sh_keysc.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SuperH KEYSC Keypad Driver
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on gpio_keys.c, Copyright 2005 Phil Blundell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/bitmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-static const struct {
- unsigned char kymd, keyout, keyin;
-} sh_keysc_mode[] = {
- [SH_KEYSC_MODE_1] = { 0, 6, 5 },
- [SH_KEYSC_MODE_2] = { 1, 5, 6 },
- [SH_KEYSC_MODE_3] = { 2, 4, 7 },
- [SH_KEYSC_MODE_4] = { 3, 6, 6 },
- [SH_KEYSC_MODE_5] = { 4, 6, 7 },
- [SH_KEYSC_MODE_6] = { 5, 8, 8 },
-};
-
-struct sh_keysc_priv {
- void __iomem *iomem_base;
- DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
- struct input_dev *input;
- struct sh_keysc_info pdata;
-};
-
-#define KYCR1 0
-#define KYCR2 1
-#define KYINDR 2
-#define KYOUTDR 3
-
-#define KYCR2_IRQ_LEVEL 0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
-static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
-{
- return ioread16(p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
- unsigned long value)
-{
- iowrite16(value, p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_level_mode(struct sh_keysc_priv *p,
- unsigned long keys_set)
-{
- struct sh_keysc_info *pdata = &p->pdata;
-
- sh_keysc_write(p, KYOUTDR, 0);
- sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
-
- if (pdata->kycr2_delay)
- udelay(pdata->kycr2_delay);
-}
-
-static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
- const char *str)
-{
- int k;
-
- for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
- dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
-}
-
-static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
-{
- struct platform_device *pdev = dev_id;
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- struct sh_keysc_info *pdata = &priv->pdata;
- int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
- int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
- DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
- unsigned char keyin_set, tmp;
- int i, k, n;
-
- dev_dbg(&pdev->dev, "isr!\n");
-
- bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
- bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
-
- do {
- bitmap_zero(keys, SH_KEYSC_MAXKEYS);
- keyin_set = 0;
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- for (i = 0; i < keyout_nr; i++) {
- n = keyin_nr * i;
-
- /* drive one KEYOUT pin low, read KEYIN pins */
- sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
- udelay(pdata->delay);
- tmp = sh_keysc_read(priv, KYINDR);
-
- /* set bit if key press has been detected */
- for (k = 0; k < keyin_nr; k++) {
- if (tmp & (1 << k))
- __set_bit(n + k, keys);
- }
-
- /* keep track of which KEYIN bits that have been set */
- keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
- }
-
- sh_keysc_level_mode(priv, keyin_set);
-
- bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
- bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
- bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
-
- sh_keysc_map_dbg(&pdev->dev, keys, "keys");
-
- } while (sh_keysc_read(priv, KYCR2) & 0x01);
-
- sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
- sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
- sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
- k = pdata->keycodes[i];
- if (!k)
- continue;
-
- if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
- continue;
-
- if (test_bit(i, keys1) || test_bit(i, keys0)) {
- input_event(priv->input, EV_KEY, k, 1);
- __set_bit(i, priv->last_keys);
- }
-
- if (!test_bit(i, keys1)) {
- input_event(priv->input, EV_KEY, k, 0);
- __clear_bit(i, priv->last_keys);
- }
-
- }
- input_sync(priv->input);
-
- return IRQ_HANDLED;
-}
-
-static int sh_keysc_probe(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv;
- struct sh_keysc_info *pdata;
- struct resource *res;
- struct input_dev *input;
- int i;
- int irq, error;
-
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "no platform data defined\n");
- error = -EINVAL;
- goto err0;
- }
-
- error = -ENXIO;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- goto err0;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- goto err0;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&pdev->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err0;
- }
-
- platform_set_drvdata(pdev, priv);
- memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
- pdata = &priv->pdata;
-
- priv->iomem_base = ioremap(res->start, resource_size(res));
- if (priv->iomem_base == NULL) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- error = -ENXIO;
- goto err1;
- }
-
- priv->input = input_allocate_device();
- if (!priv->input) {
- dev_err(&pdev->dev, "failed to allocate input device\n");
- error = -ENOMEM;
- goto err2;
- }
-
- input = priv->input;
- input->evbit[0] = BIT_MASK(EV_KEY);
-
- input->name = pdev->name;
- input->phys = "sh-keysc-keys/input0";
- input->dev.parent = &pdev->dev;
-
- input->id.bustype = BUS_HOST;
- input->id.vendor = 0x0001;
- input->id.product = 0x0001;
- input->id.version = 0x0100;
-
- input->keycode = pdata->keycodes;
- input->keycodesize = sizeof(pdata->keycodes[0]);
- input->keycodemax = ARRAY_SIZE(pdata->keycodes);
-
- error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
- dev_name(&pdev->dev), pdev);
- if (error) {
- dev_err(&pdev->dev, "failed to request IRQ\n");
- goto err3;
- }
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
- __set_bit(pdata->keycodes[i], input->keybit);
- __clear_bit(KEY_RESERVED, input->keybit);
-
- error = input_register_device(input);
- if (error) {
- dev_err(&pdev->dev, "failed to register input device\n");
- goto err4;
- }
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
- pdata->scan_timing);
- sh_keysc_level_mode(priv, 0);
-
- device_init_wakeup(&pdev->dev, 1);
-
- return 0;
-
- err4:
- free_irq(irq, pdev);
- err3:
- input_free_device(input);
- err2:
- iounmap(priv->iomem_base);
- err1:
- kfree(priv);
- err0:
- return error;
-}
-
-static int sh_keysc_remove(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- input_unregister_device(priv->input);
- free_irq(platform_get_irq(pdev, 0), pdev);
- iounmap(priv->iomem_base);
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- kfree(priv);
-
- return 0;
-}
-
-static int sh_keysc_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
- unsigned short value;
-
- value = sh_keysc_read(priv, KYCR1);
-
- if (device_may_wakeup(dev)) {
- sh_keysc_write(priv, KYCR1, value | 0x80);
- enable_irq_wake(irq);
- } else {
- sh_keysc_write(priv, KYCR1, value & ~0x80);
- pm_runtime_put_sync(dev);
- }
-
- return 0;
-}
-
-static int sh_keysc_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int irq = platform_get_irq(pdev, 0);
-
- if (device_may_wakeup(dev))
- disable_irq_wake(irq);
- else
- pm_runtime_get_sync(dev);
-
- return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
- sh_keysc_suspend, sh_keysc_resume);
-
-static struct platform_driver sh_keysc_device_driver = {
- .probe = sh_keysc_probe,
- .remove = sh_keysc_remove,
- .driver = {
- .name = "sh_keysc",
- .pm = pm_sleep_ptr(&sh_keysc_dev_pm_ops),
- }
-};
-module_platform_driver(sh_keysc_device_driver);
-
-MODULE_AUTHOR("Magnus Damm");
-MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
-MODULE_LICENSE("GPL");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 10/22] input: remove sh_keysc
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/input/keyboard/Kconfig | 10 -
drivers/input/keyboard/Makefile | 1 -
drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
3 files changed, 345 deletions(-)
delete mode 100644 drivers/input/keyboard/sh_keysc.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 84490915ae4d5a..882ec5fef214ac 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
To compile this driver as a module, choose M here: the
module will be called sunkbd.
-config KEYBOARD_SH_KEYSC
- tristate "SuperH KEYSC keypad support"
- depends on ARCH_SHMOBILE || COMPILE_TEST
- help
- Say Y here if you want to use a keypad attached to the KEYSC block
- on SuperH processors such as sh7722 and sh7343.
-
- To compile this driver as a module, choose M here: the
- module will be called sh_keysc.
-
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 5f67196bb2c1ea..8aba0b052b4504 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -60,7 +60,6 @@ obj-$(CONFIG_KEYBOARD_QT1050) += qt1050.o
obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
-obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
deleted file mode 100644
index 2c00320f739fc1..00000000000000
--- a/drivers/input/keyboard/sh_keysc.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SuperH KEYSC Keypad Driver
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on gpio_keys.c, Copyright 2005 Phil Blundell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/bitmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-static const struct {
- unsigned char kymd, keyout, keyin;
-} sh_keysc_mode[] = {
- [SH_KEYSC_MODE_1] = { 0, 6, 5 },
- [SH_KEYSC_MODE_2] = { 1, 5, 6 },
- [SH_KEYSC_MODE_3] = { 2, 4, 7 },
- [SH_KEYSC_MODE_4] = { 3, 6, 6 },
- [SH_KEYSC_MODE_5] = { 4, 6, 7 },
- [SH_KEYSC_MODE_6] = { 5, 8, 8 },
-};
-
-struct sh_keysc_priv {
- void __iomem *iomem_base;
- DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
- struct input_dev *input;
- struct sh_keysc_info pdata;
-};
-
-#define KYCR1 0
-#define KYCR2 1
-#define KYINDR 2
-#define KYOUTDR 3
-
-#define KYCR2_IRQ_LEVEL 0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
-static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
-{
- return ioread16(p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
- unsigned long value)
-{
- iowrite16(value, p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_level_mode(struct sh_keysc_priv *p,
- unsigned long keys_set)
-{
- struct sh_keysc_info *pdata = &p->pdata;
-
- sh_keysc_write(p, KYOUTDR, 0);
- sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
-
- if (pdata->kycr2_delay)
- udelay(pdata->kycr2_delay);
-}
-
-static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
- const char *str)
-{
- int k;
-
- for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
- dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
-}
-
-static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
-{
- struct platform_device *pdev = dev_id;
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- struct sh_keysc_info *pdata = &priv->pdata;
- int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
- int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
- DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
- unsigned char keyin_set, tmp;
- int i, k, n;
-
- dev_dbg(&pdev->dev, "isr!\n");
-
- bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
- bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
-
- do {
- bitmap_zero(keys, SH_KEYSC_MAXKEYS);
- keyin_set = 0;
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- for (i = 0; i < keyout_nr; i++) {
- n = keyin_nr * i;
-
- /* drive one KEYOUT pin low, read KEYIN pins */
- sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
- udelay(pdata->delay);
- tmp = sh_keysc_read(priv, KYINDR);
-
- /* set bit if key press has been detected */
- for (k = 0; k < keyin_nr; k++) {
- if (tmp & (1 << k))
- __set_bit(n + k, keys);
- }
-
- /* keep track of which KEYIN bits that have been set */
- keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
- }
-
- sh_keysc_level_mode(priv, keyin_set);
-
- bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
- bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
- bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
-
- sh_keysc_map_dbg(&pdev->dev, keys, "keys");
-
- } while (sh_keysc_read(priv, KYCR2) & 0x01);
-
- sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
- sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
- sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
- k = pdata->keycodes[i];
- if (!k)
- continue;
-
- if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
- continue;
-
- if (test_bit(i, keys1) || test_bit(i, keys0)) {
- input_event(priv->input, EV_KEY, k, 1);
- __set_bit(i, priv->last_keys);
- }
-
- if (!test_bit(i, keys1)) {
- input_event(priv->input, EV_KEY, k, 0);
- __clear_bit(i, priv->last_keys);
- }
-
- }
- input_sync(priv->input);
-
- return IRQ_HANDLED;
-}
-
-static int sh_keysc_probe(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv;
- struct sh_keysc_info *pdata;
- struct resource *res;
- struct input_dev *input;
- int i;
- int irq, error;
-
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "no platform data defined\n");
- error = -EINVAL;
- goto err0;
- }
-
- error = -ENXIO;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- goto err0;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- goto err0;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&pdev->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err0;
- }
-
- platform_set_drvdata(pdev, priv);
- memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
- pdata = &priv->pdata;
-
- priv->iomem_base = ioremap(res->start, resource_size(res));
- if (priv->iomem_base == NULL) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- error = -ENXIO;
- goto err1;
- }
-
- priv->input = input_allocate_device();
- if (!priv->input) {
- dev_err(&pdev->dev, "failed to allocate input device\n");
- error = -ENOMEM;
- goto err2;
- }
-
- input = priv->input;
- input->evbit[0] = BIT_MASK(EV_KEY);
-
- input->name = pdev->name;
- input->phys = "sh-keysc-keys/input0";
- input->dev.parent = &pdev->dev;
-
- input->id.bustype = BUS_HOST;
- input->id.vendor = 0x0001;
- input->id.product = 0x0001;
- input->id.version = 0x0100;
-
- input->keycode = pdata->keycodes;
- input->keycodesize = sizeof(pdata->keycodes[0]);
- input->keycodemax = ARRAY_SIZE(pdata->keycodes);
-
- error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
- dev_name(&pdev->dev), pdev);
- if (error) {
- dev_err(&pdev->dev, "failed to request IRQ\n");
- goto err3;
- }
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
- __set_bit(pdata->keycodes[i], input->keybit);
- __clear_bit(KEY_RESERVED, input->keybit);
-
- error = input_register_device(input);
- if (error) {
- dev_err(&pdev->dev, "failed to register input device\n");
- goto err4;
- }
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
- pdata->scan_timing);
- sh_keysc_level_mode(priv, 0);
-
- device_init_wakeup(&pdev->dev, 1);
-
- return 0;
-
- err4:
- free_irq(irq, pdev);
- err3:
- input_free_device(input);
- err2:
- iounmap(priv->iomem_base);
- err1:
- kfree(priv);
- err0:
- return error;
-}
-
-static int sh_keysc_remove(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- input_unregister_device(priv->input);
- free_irq(platform_get_irq(pdev, 0), pdev);
- iounmap(priv->iomem_base);
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- kfree(priv);
-
- return 0;
-}
-
-static int sh_keysc_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
- unsigned short value;
-
- value = sh_keysc_read(priv, KYCR1);
-
- if (device_may_wakeup(dev)) {
- sh_keysc_write(priv, KYCR1, value | 0x80);
- enable_irq_wake(irq);
- } else {
- sh_keysc_write(priv, KYCR1, value & ~0x80);
- pm_runtime_put_sync(dev);
- }
-
- return 0;
-}
-
-static int sh_keysc_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int irq = platform_get_irq(pdev, 0);
-
- if (device_may_wakeup(dev))
- disable_irq_wake(irq);
- else
- pm_runtime_get_sync(dev);
-
- return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
- sh_keysc_suspend, sh_keysc_resume);
-
-static struct platform_driver sh_keysc_device_driver = {
- .probe = sh_keysc_probe,
- .remove = sh_keysc_remove,
- .driver = {
- .name = "sh_keysc",
- .pm = pm_sleep_ptr(&sh_keysc_dev_pm_ops),
- }
-};
-module_platform_driver(sh_keysc_device_driver);
-
-MODULE_AUTHOR("Magnus Damm");
-MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 10/22] input: remove sh_keysc
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/input/keyboard/Kconfig | 10 -
drivers/input/keyboard/Makefile | 1 -
drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
3 files changed, 345 deletions(-)
delete mode 100644 drivers/input/keyboard/sh_keysc.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 84490915ae4d5a..882ec5fef214ac 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
To compile this driver as a module, choose M here: the
module will be called sunkbd.
-config KEYBOARD_SH_KEYSC
- tristate "SuperH KEYSC keypad support"
- depends on ARCH_SHMOBILE || COMPILE_TEST
- help
- Say Y here if you want to use a keypad attached to the KEYSC block
- on SuperH processors such as sh7722 and sh7343.
-
- To compile this driver as a module, choose M here: the
- module will be called sh_keysc.
-
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 5f67196bb2c1ea..8aba0b052b4504 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -60,7 +60,6 @@ obj-$(CONFIG_KEYBOARD_QT1050) += qt1050.o
obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
-obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
deleted file mode 100644
index 2c00320f739fc1..00000000000000
--- a/drivers/input/keyboard/sh_keysc.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SuperH KEYSC Keypad Driver
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on gpio_keys.c, Copyright 2005 Phil Blundell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/bitmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-static const struct {
- unsigned char kymd, keyout, keyin;
-} sh_keysc_mode[] = {
- [SH_KEYSC_MODE_1] = { 0, 6, 5 },
- [SH_KEYSC_MODE_2] = { 1, 5, 6 },
- [SH_KEYSC_MODE_3] = { 2, 4, 7 },
- [SH_KEYSC_MODE_4] = { 3, 6, 6 },
- [SH_KEYSC_MODE_5] = { 4, 6, 7 },
- [SH_KEYSC_MODE_6] = { 5, 8, 8 },
-};
-
-struct sh_keysc_priv {
- void __iomem *iomem_base;
- DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
- struct input_dev *input;
- struct sh_keysc_info pdata;
-};
-
-#define KYCR1 0
-#define KYCR2 1
-#define KYINDR 2
-#define KYOUTDR 3
-
-#define KYCR2_IRQ_LEVEL 0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
-static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
-{
- return ioread16(p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
- unsigned long value)
-{
- iowrite16(value, p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_level_mode(struct sh_keysc_priv *p,
- unsigned long keys_set)
-{
- struct sh_keysc_info *pdata = &p->pdata;
-
- sh_keysc_write(p, KYOUTDR, 0);
- sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
-
- if (pdata->kycr2_delay)
- udelay(pdata->kycr2_delay);
-}
-
-static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
- const char *str)
-{
- int k;
-
- for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
- dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
-}
-
-static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
-{
- struct platform_device *pdev = dev_id;
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- struct sh_keysc_info *pdata = &priv->pdata;
- int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
- int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
- DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
- DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
- unsigned char keyin_set, tmp;
- int i, k, n;
-
- dev_dbg(&pdev->dev, "isr!\n");
-
- bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
- bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
-
- do {
- bitmap_zero(keys, SH_KEYSC_MAXKEYS);
- keyin_set = 0;
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- for (i = 0; i < keyout_nr; i++) {
- n = keyin_nr * i;
-
- /* drive one KEYOUT pin low, read KEYIN pins */
- sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
- udelay(pdata->delay);
- tmp = sh_keysc_read(priv, KYINDR);
-
- /* set bit if key press has been detected */
- for (k = 0; k < keyin_nr; k++) {
- if (tmp & (1 << k))
- __set_bit(n + k, keys);
- }
-
- /* keep track of which KEYIN bits that have been set */
- keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
- }
-
- sh_keysc_level_mode(priv, keyin_set);
-
- bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
- bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
- bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
-
- sh_keysc_map_dbg(&pdev->dev, keys, "keys");
-
- } while (sh_keysc_read(priv, KYCR2) & 0x01);
-
- sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
- sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
- sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
- k = pdata->keycodes[i];
- if (!k)
- continue;
-
- if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
- continue;
-
- if (test_bit(i, keys1) || test_bit(i, keys0)) {
- input_event(priv->input, EV_KEY, k, 1);
- __set_bit(i, priv->last_keys);
- }
-
- if (!test_bit(i, keys1)) {
- input_event(priv->input, EV_KEY, k, 0);
- __clear_bit(i, priv->last_keys);
- }
-
- }
- input_sync(priv->input);
-
- return IRQ_HANDLED;
-}
-
-static int sh_keysc_probe(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv;
- struct sh_keysc_info *pdata;
- struct resource *res;
- struct input_dev *input;
- int i;
- int irq, error;
-
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "no platform data defined\n");
- error = -EINVAL;
- goto err0;
- }
-
- error = -ENXIO;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- goto err0;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- goto err0;
-
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&pdev->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err0;
- }
-
- platform_set_drvdata(pdev, priv);
- memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
- pdata = &priv->pdata;
-
- priv->iomem_base = ioremap(res->start, resource_size(res));
- if (priv->iomem_base == NULL) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- error = -ENXIO;
- goto err1;
- }
-
- priv->input = input_allocate_device();
- if (!priv->input) {
- dev_err(&pdev->dev, "failed to allocate input device\n");
- error = -ENOMEM;
- goto err2;
- }
-
- input = priv->input;
- input->evbit[0] = BIT_MASK(EV_KEY);
-
- input->name = pdev->name;
- input->phys = "sh-keysc-keys/input0";
- input->dev.parent = &pdev->dev;
-
- input->id.bustype = BUS_HOST;
- input->id.vendor = 0x0001;
- input->id.product = 0x0001;
- input->id.version = 0x0100;
-
- input->keycode = pdata->keycodes;
- input->keycodesize = sizeof(pdata->keycodes[0]);
- input->keycodemax = ARRAY_SIZE(pdata->keycodes);
-
- error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
- dev_name(&pdev->dev), pdev);
- if (error) {
- dev_err(&pdev->dev, "failed to request IRQ\n");
- goto err3;
- }
-
- for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
- __set_bit(pdata->keycodes[i], input->keybit);
- __clear_bit(KEY_RESERVED, input->keybit);
-
- error = input_register_device(input);
- if (error) {
- dev_err(&pdev->dev, "failed to register input device\n");
- goto err4;
- }
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
- pdata->scan_timing);
- sh_keysc_level_mode(priv, 0);
-
- device_init_wakeup(&pdev->dev, 1);
-
- return 0;
-
- err4:
- free_irq(irq, pdev);
- err3:
- input_free_device(input);
- err2:
- iounmap(priv->iomem_base);
- err1:
- kfree(priv);
- err0:
- return error;
-}
-
-static int sh_keysc_remove(struct platform_device *pdev)
-{
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-
- sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
- input_unregister_device(priv->input);
- free_irq(platform_get_irq(pdev, 0), pdev);
- iounmap(priv->iomem_base);
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- kfree(priv);
-
- return 0;
-}
-
-static int sh_keysc_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
- unsigned short value;
-
- value = sh_keysc_read(priv, KYCR1);
-
- if (device_may_wakeup(dev)) {
- sh_keysc_write(priv, KYCR1, value | 0x80);
- enable_irq_wake(irq);
- } else {
- sh_keysc_write(priv, KYCR1, value & ~0x80);
- pm_runtime_put_sync(dev);
- }
-
- return 0;
-}
-
-static int sh_keysc_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int irq = platform_get_irq(pdev, 0);
-
- if (device_may_wakeup(dev))
- disable_irq_wake(irq);
- else
- pm_runtime_get_sync(dev);
-
- return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
- sh_keysc_suspend, sh_keysc_resume);
-
-static struct platform_driver sh_keysc_device_driver = {
- .probe = sh_keysc_probe,
- .remove = sh_keysc_remove,
- .driver = {
- .name = "sh_keysc",
- .pm = pm_sleep_ptr(&sh_keysc_dev_pm_ops),
- }
-};
-module_platform_driver(sh_keysc_device_driver);
-
-MODULE_AUTHOR("Magnus Damm");
-MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 10/22] input: remove sh_keysc
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:28 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:28 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/input/keyboard/Kconfig | 10 -
> drivers/input/keyboard/Makefile | 1 -
> drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
> 3 files changed, 345 deletions(-)
> delete mode 100644 drivers/input/keyboard/sh_keysc.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 84490915ae4d5a..882ec5fef214ac 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
> To compile this driver as a module, choose M here: the
> module will be called sunkbd.
>
> -config KEYBOARD_SH_KEYSC
> - tristate "SuperH KEYSC keypad support"
> - depends on ARCH_SHMOBILE || COMPILE_TEST
> - help
> - Say Y here if you want to use a keypad attached to the KEYSC block
> - on SuperH processors such as sh7722 and sh7343.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5, and R-Mobile A1 and APE6 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 10/22] input: remove sh_keysc
@ 2023-01-13 8:28 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:28 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/input/keyboard/Kconfig | 10 -
> drivers/input/keyboard/Makefile | 1 -
> drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
> 3 files changed, 345 deletions(-)
> delete mode 100644 drivers/input/keyboard/sh_keysc.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 84490915ae4d5a..882ec5fef214ac 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
> To compile this driver as a module, choose M here: the
> module will be called sunkbd.
>
> -config KEYBOARD_SH_KEYSC
> - tristate "SuperH KEYSC keypad support"
> - depends on ARCH_SHMOBILE || COMPILE_TEST
> - help
> - Say Y here if you want to use a keypad attached to the KEYSC block
> - on SuperH processors such as sh7722 and sh7343.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5, and R-Mobile A1 and APE6 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 10/22] input: remove sh_keysc
@ 2023-01-13 8:28 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:28 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, linux-sh, linux-rtc, dri-devel,
linux-mtd, linux-i2c, linux-arch, Yoshinori Sato, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog,
Arnd Bergmann, linux-gpio, Greg Kroah-Hartman, linux-usb,
linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/input/keyboard/Kconfig | 10 -
> drivers/input/keyboard/Makefile | 1 -
> drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
> 3 files changed, 345 deletions(-)
> delete mode 100644 drivers/input/keyboard/sh_keysc.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 84490915ae4d5a..882ec5fef214ac 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
> To compile this driver as a module, choose M here: the
> module will be called sunkbd.
>
> -config KEYBOARD_SH_KEYSC
> - tristate "SuperH KEYSC keypad support"
> - depends on ARCH_SHMOBILE || COMPILE_TEST
> - help
> - Say Y here if you want to use a keypad attached to the KEYSC block
> - on SuperH processors such as sh7722 and sh7343.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5, and R-Mobile A1 and APE6 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 11/22] mtd/nand: remove sh_flctl
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/mtd/nand/raw/Kconfig | 8 -
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
include/linux/mtd/sh_flctl.h | 180 -----
4 files changed, 1423 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
delete mode 100644 include/linux/mtd/sh_flctl.h
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 98ea1c9e65c8ef..20a4988ea418d5 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -284,14 +284,6 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
-config MTD_NAND_SH_FLCTL
- tristate "Renesas SuperH FLCTL NAND controller"
- depends on SUPERH || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL.
-
config MTD_NAND_DAVINCI
tristate "DaVinci/Keystone NAND controller"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index fa1d0012031012..2c6eb25c9d0aae 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o
obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
-obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
deleted file mode 100644
index a278829469d610..00000000000000
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ /dev/null
@@ -1,1234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH FLCTL nand controller
- *
- * Copyright (c) 2008 Renesas Solutions Corp.
- * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
- *
- * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/sh_flctl.h>
-
-static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section)
- return -ERANGE;
-
- oobregion->offset = 0;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section)
- return -ERANGE;
-
- oobregion->offset = 12;
- oobregion->length = 4;
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = {
- .ecc = flctl_4secc_ooblayout_sp_ecc,
- .free = flctl_4secc_ooblayout_sp_free,
-};
-
-static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = (section * 16) + 6;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = section * 16;
- oobregion->length = 6;
-
- if (!section) {
- oobregion->offset += 2;
- oobregion->length -= 2;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
- .ecc = flctl_4secc_ooblayout_lp_ecc,
- .free = flctl_4secc_ooblayout_lp_free,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr flctl_4secc_smallpage = {
- .offs = 11,
- .len = 1,
- .pattern = scan_ff_pattern,
-};
-
-static struct nand_bbt_descr flctl_4secc_largepage = {
- .offs = 0,
- .len = 2,
- .pattern = scan_ff_pattern,
-};
-
-static void empty_fifo(struct sh_flctl *flctl)
-{
- writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-}
-
-static void start_translation(struct sh_flctl *flctl)
-{
- writeb(TRSTRT, FLTRCR(flctl));
-}
-
-static void timeout_error(struct sh_flctl *flctl, const char *str)
-{
- dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
-}
-
-static void wait_completion(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- if (readb(FLTRCR(flctl)) & TREND) {
- writeb(0x0, FLTRCR(flctl));
- return;
- }
- udelay(1);
- }
-
- timeout_error(flctl, __func__);
- writeb(0x0, FLTRCR(flctl));
-}
-
-static void flctl_dma_complete(void *param)
-{
- struct sh_flctl *flctl = param;
-
- complete(&flctl->dma_complete);
-}
-
-static void flctl_release_dma(struct sh_flctl *flctl)
-{
- if (flctl->chan_fifo0_rx) {
- dma_release_channel(flctl->chan_fifo0_rx);
- flctl->chan_fifo0_rx = NULL;
- }
- if (flctl->chan_fifo0_tx) {
- dma_release_channel(flctl->chan_fifo0_tx);
- flctl->chan_fifo0_tx = NULL;
- }
-}
-
-static void flctl_setup_dma(struct sh_flctl *flctl)
-{
- dma_cap_mask_t mask;
- struct dma_slave_config cfg;
- struct platform_device *pdev = flctl->pdev;
- struct sh_flctl_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret;
-
- if (!pdata)
- return;
-
- if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
- return;
-
- /* We can only either use DMA for both Tx and Rx or not use it at all */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_tx);
- dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
- flctl->chan_fifo0_tx);
-
- if (!flctl->chan_fifo0_tx)
- return;
-
- memset(&cfg, 0, sizeof(cfg));
- cfg.direction = DMA_MEM_TO_DEV;
- cfg.dst_addr = flctl->fifo;
- cfg.src_addr = 0;
- ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
- if (ret < 0)
- goto err;
-
- flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_rx);
- dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
- flctl->chan_fifo0_rx);
-
- if (!flctl->chan_fifo0_rx)
- goto err;
-
- cfg.direction = DMA_DEV_TO_MEM;
- cfg.dst_addr = 0;
- cfg.src_addr = flctl->fifo;
- ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
- if (ret < 0)
- goto err;
-
- init_completion(&flctl->dma_complete);
-
- return;
-
-err:
- flctl_release_dma(flctl);
-}
-
-static void set_addr(struct mtd_info *mtd, int column, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t addr = 0;
-
- if (column == -1) {
- addr = page_addr; /* ERASE1 */
- } else if (page_addr != -1) {
- /* SEQIN, READ0, etc.. */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- if (flctl->page_size) {
- addr = column & 0x0FFF;
- addr |= (page_addr & 0xff) << 16;
- addr |= ((page_addr >> 8) & 0xff) << 24;
- /* big than 128MB */
- if (flctl->rw_ADRCNT == ADRCNT2_E) {
- uint32_t addr2;
- addr2 = (page_addr >> 16) & 0xff;
- writel(addr2, FLADR2(flctl));
- }
- } else {
- addr = column;
- addr |= (page_addr & 0xff) << 8;
- addr |= ((page_addr >> 8) & 0xff) << 16;
- addr |= ((page_addr >> 16) & 0xff) << 24;
- }
- }
- writel(addr, FLADR(flctl));
-}
-
-static void wait_rfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- uint32_t val;
- /* check FIFO */
- val = readl(FLDTCNTR(flctl)) >> 16;
- if (val & 0xFF)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static void wait_wfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t len, timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- /* check FIFO */
- len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static enum flctl_ecc_res_t wait_recfifo_ready
- (struct sh_flctl *flctl, int sector_number)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- void __iomem *ecc_reg[4];
- int i;
- int state = FL_SUCCESS;
- uint32_t data, size;
-
- /*
- * First this loops checks in FLDTCNTR if we are ready to read out the
- * oob data. This is the case if either all went fine without errors or
- * if the bottom part of the loop corrected the errors or marked them as
- * uncorrectable and the controller is given time to push the data into
- * the FIFO.
- */
- while (timeout--) {
- /* check if all is ok and we can read out the OOB */
- size = readl(FLDTCNTR(flctl)) >> 24;
- if ((size & 0xFF) == 4)
- return state;
-
- /* check if a correction code has been calculated */
- if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
- /*
- * either we wait for the fifo to be filled or a
- * correction pattern is being generated
- */
- udelay(1);
- continue;
- }
-
- /* check for an uncorrectable error */
- if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
- /* check if we face a non-empty page */
- for (i = 0; i < 512; i++) {
- if (flctl->done_buff[i] != 0xff) {
- state = FL_ERROR; /* can't correct */
- break;
- }
- }
-
- if (state == FL_SUCCESS)
- dev_dbg(&flctl->pdev->dev,
- "reading empty sector %d, ecc error ignored\n",
- sector_number);
-
- writel(0, FL4ECCCR(flctl));
- continue;
- }
-
- /* start error correction */
- ecc_reg[0] = FL4ECCRESULT0(flctl);
- ecc_reg[1] = FL4ECCRESULT1(flctl);
- ecc_reg[2] = FL4ECCRESULT2(flctl);
- ecc_reg[3] = FL4ECCRESULT3(flctl);
-
- for (i = 0; i < 3; i++) {
- uint8_t org;
- unsigned int index;
-
- data = readl(ecc_reg[i]);
-
- if (flctl->page_size)
- index = (512 * sector_number) +
- (data >> 16);
- else
- index = data >> 16;
-
- org = flctl->done_buff[index];
- flctl->done_buff[index] = org ^ (data & 0xFF);
- }
- state = FL_REPAIRABLE;
- writel(0, FL4ECCCR(flctl));
- }
-
- timeout_error(flctl, __func__);
- return FL_TIMEOUT; /* timeout */
-}
-
-static void wait_wecfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- uint32_t len;
-
- while (timeout--) {
- /* check FLECFIFO */
- len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
- int len, enum dma_data_direction dir)
-{
- struct dma_async_tx_descriptor *desc = NULL;
- struct dma_chan *chan;
- enum dma_transfer_direction tr_dir;
- dma_addr_t dma_addr;
- dma_cookie_t cookie;
- uint32_t reg;
- int ret = 0;
- unsigned long time_left;
-
- if (dir == DMA_FROM_DEVICE) {
- chan = flctl->chan_fifo0_rx;
- tr_dir = DMA_DEV_TO_MEM;
- } else {
- chan = flctl->chan_fifo0_tx;
- tr_dir = DMA_MEM_TO_DEV;
- }
-
- dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
-
- if (!dma_mapping_error(chan->device->dev, dma_addr))
- desc = dmaengine_prep_slave_single(chan, dma_addr, len,
- tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-
- if (desc) {
- reg = readl(FLINTDMACR(flctl));
- reg |= DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- desc->callback = flctl_dma_complete;
- desc->callback_param = flctl;
- cookie = dmaengine_submit(desc);
- if (dma_submit_error(cookie)) {
- ret = dma_submit_error(cookie);
- dev_warn(&flctl->pdev->dev,
- "DMA submit failed, falling back to PIO\n");
- goto out;
- }
-
- dma_async_issue_pending(chan);
- } else {
- /* DMA failed, fall back to PIO */
- flctl_release_dma(flctl);
- dev_warn(&flctl->pdev->dev,
- "DMA failed, falling back to PIO\n");
- ret = -EIO;
- goto out;
- }
-
- time_left =
- wait_for_completion_timeout(&flctl->dma_complete,
- msecs_to_jiffies(3000));
-
- if (time_left == 0) {
- dmaengine_terminate_all(chan);
- dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
- ret = -ETIMEDOUT;
- }
-
-out:
- reg = readl(FLINTDMACR(flctl));
- reg &= ~DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- dma_unmap_single(chan->device->dev, dma_addr, len, dir);
-
- /* ret == 0 is success */
- return ret;
-}
-
-static void read_datareg(struct sh_flctl *flctl, int offset)
-{
- unsigned long data;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- wait_completion(flctl);
-
- data = readl(FLDATAR(flctl));
- *buf = le32_to_cpu(data);
-}
-
-static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_rx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
- goto convert; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_rfifo_ready(flctl);
- buf[i] = readl(FLDTFIFO(flctl));
- }
-
-convert:
- for (i = 0; i < len_4align; i++)
- buf[i] = be32_to_cpu(buf[i]);
-}
-
-static enum flctl_ecc_res_t read_ecfiforeg
- (struct sh_flctl *flctl, uint8_t *buff, int sector)
-{
- int i;
- enum flctl_ecc_res_t res;
- unsigned long *ecc_buf = (unsigned long *)buff;
-
- res = wait_recfifo_ready(flctl , sector);
-
- if (res != FL_ERROR) {
- for (i = 0; i < 4; i++) {
- ecc_buf[i] = readl(FLECFIFO(flctl));
- ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
- }
- }
-
- return res;
-}
-
-static void write_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
- for (i = 0; i < len_4align; i++) {
- wait_wfifo_ready(flctl);
- writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
- }
-}
-
-static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- for (i = 0; i < len_4align; i++)
- buf[i] = cpu_to_be32(buf[i]);
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_tx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
- return; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_wecfifo_ready(flctl);
- writel(buf[i], FLECFIFO(flctl));
- }
-}
-
-static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
- uint32_t flcmdcr_val, addr_len_bytes = 0;
-
- /* Set SNAND bit if page size is 2048byte */
- if (flctl->page_size)
- flcmncr_val |= SNAND_E;
- else
- flcmncr_val &= ~SNAND_E;
-
- /* default FLCMDCR val */
- flcmdcr_val = DOCMD1_E | DOADR_E;
-
- /* Set for FLCMDCR */
- switch (cmd) {
- case NAND_CMD_ERASE1:
- addr_len_bytes = flctl->erase_ADRCNT;
- flcmdcr_val |= DOCMD2_E;
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_READOOB:
- case NAND_CMD_RNDOUT:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= CDSRC_E;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_SEQIN:
- /* This case is that cmd is READ0 or READ1 or READ00 */
- flcmdcr_val &= ~DOADR_E; /* ONLY execute 1st cmd */
- break;
- case NAND_CMD_PAGEPROG:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_READID:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val |= CDSRC_E;
- addr_len_bytes = ADRCNT_1;
- break;
- case NAND_CMD_STATUS:
- case NAND_CMD_RESET:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val &= ~(DOADR_E | DOSR_E);
- break;
- default:
- break;
- }
-
- /* Set address bytes parameter */
- flcmdcr_val |= addr_len_bytes;
-
- /* Now actually write */
- writel(flcmncr_val, FLCMNCR(flctl));
- writel(flcmdcr_val, FLCMDCR(flctl));
- writel(flcmcdr_val, FLCMCDR(flctl));
-}
-
-static int flctl_read_page_hwecc(struct nand_chip *chip, uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_read_page_op(chip, page, 0, buf, mtd->writesize);
- if (oob_required)
- chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize);
- return 0;
-}
-
-static int flctl_write_page_hwecc(struct nand_chip *chip, const uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
- chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
- return nand_prog_page_end_op(chip);
-}
-
-static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int sector, page_sectors;
- enum flctl_ecc_res_t ecc_result;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
- FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
-
- empty_fifo(flctl);
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- read_fiforeg(flctl, 512, 512 * sector);
-
- ecc_result = read_ecfiforeg(flctl,
- &flctl->done_buff[mtd->writesize + 16 * sector],
- sector);
-
- switch (ecc_result) {
- case FL_REPAIRABLE:
- dev_info(&flctl->pdev->dev,
- "applied ecc on page 0x%x", page_addr);
- mtd->ecc_stats.corrected++;
- break;
- case FL_ERROR:
- dev_warn(&flctl->pdev->dev,
- "page 0x%x contains corrupted data\n",
- page_addr);
- mtd->ecc_stats.failed++;
- break;
- default:
- ;
- }
- }
-
- wait_completion(flctl);
-
- writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
- FLCMNCR(flctl));
-}
-
-static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_sectors = flctl->page_size ? 4 : 1;
- int i;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- empty_fifo(flctl);
-
- for (i = 0; i < page_sectors; i++) {
- set_addr(mtd, (512 + 16) * i + 512 , page_addr);
- writel(16, FLDTCNTR(flctl));
-
- start_translation(flctl);
- read_fiforeg(flctl, 16, 16 * i);
- wait_completion(flctl);
- }
-}
-
-static void execmd_write_page_sector(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- empty_fifo(flctl);
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- write_fiforeg(flctl, 512, 512 * sector);
- write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
- }
-
- wait_completion(flctl);
- writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
-}
-
-static void execmd_write_oob(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- set_addr(mtd, sector * 528 + 512, page_addr);
- writel(16, FLDTCNTR(flctl)); /* set read size */
-
- start_translation(flctl);
- write_fiforeg(flctl, 16, 16 * sector);
- wait_completion(flctl);
- }
-}
-
-static void flctl_cmdfunc(struct nand_chip *chip, unsigned int command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t read_cmd = 0;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
-
- flctl->read_bytes = 0;
- if (command != NAND_CMD_PAGEPROG)
- flctl->index = 0;
-
- switch (command) {
- case NAND_CMD_READ1:
- case NAND_CMD_READ0:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_page_sector(mtd, page_addr);
- break;
- }
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, 0, page_addr);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- flctl->index += column;
- goto read_normal_exit;
-
- case NAND_CMD_READOOB:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_oob(mtd, page_addr);
- break;
- }
-
- if (flctl->page_size) {
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | NAND_CMD_READ0);
- set_addr(mtd, mtd->writesize, page_addr);
- } else {
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, page_addr);
- }
- flctl->read_bytes = mtd->oobsize;
- goto read_normal_exit;
-
- case NAND_CMD_RNDOUT:
- if (flctl->hwecc)
- break;
-
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
- goto read_normal_exit;
-
- case NAND_CMD_READID:
- set_cmd_regs(mtd, command, command);
-
- /* READID is always performed using an 8-bit bus */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column <<= 1;
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = 8;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_ERASE1:
- flctl->erase1_page_addr = page_addr;
- break;
-
- case NAND_CMD_ERASE2:
- set_cmd_regs(mtd, NAND_CMD_ERASE1,
- (command << 8) | NAND_CMD_ERASE1);
- set_addr(mtd, -1, flctl->erase1_page_addr);
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_SEQIN:
- if (!flctl->page_size) {
- /* output read command */
- if (column >= mtd->writesize) {
- column -= mtd->writesize;
- read_cmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- read_cmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- read_cmd = NAND_CMD_READ1;
- }
- }
- flctl->seqin_column = column;
- flctl->seqin_page_addr = page_addr;
- flctl->seqin_read_cmd = read_cmd;
- break;
-
- case NAND_CMD_PAGEPROG:
- empty_fifo(flctl);
- if (!flctl->page_size) {
- set_cmd_regs(mtd, NAND_CMD_SEQIN,
- flctl->seqin_read_cmd);
- set_addr(mtd, -1, -1);
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- }
- if (flctl->hwecc) {
- /* write page with hwecc */
- if (flctl->seqin_column == mtd->writesize)
- execmd_write_oob(mtd);
- else if (!flctl->seqin_column)
- execmd_write_page_sector(mtd);
- else
- pr_err("Invalid address !?\n");
- break;
- }
- set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
- set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
- writel(flctl->index, FLDTCNTR(flctl)); /* set write size */
- start_translation(flctl);
- write_fiforeg(flctl, flctl->index, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_STATUS:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- flctl->read_bytes = 1;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
- break;
-
- case NAND_CMD_RESET:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- default:
- break;
- }
- goto runtime_exit;
-
-read_normal_exit:
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
-runtime_exit:
- pm_runtime_put_sync(&flctl->pdev->dev);
- return;
-}
-
-static void flctl_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- int ret;
-
- switch (chipnr) {
- case -1:
- flctl->flcmncr_base &= ~CE0_ENABLE;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(flctl->flcmncr_base, FLCMNCR(flctl));
-
- if (flctl->qos_request) {
- dev_pm_qos_remove_request(&flctl->pm_qos);
- flctl->qos_request = 0;
- }
-
- pm_runtime_put_sync(&flctl->pdev->dev);
- break;
- case 0:
- flctl->flcmncr_base |= CE0_ENABLE;
-
- if (!flctl->qos_request) {
- ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos,
- DEV_PM_QOS_RESUME_LATENCY,
- 100);
- if (ret < 0)
- dev_err(&flctl->pdev->dev,
- "PM QoS request failed: %d\n", ret);
- flctl->qos_request = 1;
- }
-
- if (flctl->holden) {
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(HOLDEN, FLHOLDCR(flctl));
- pm_runtime_put_sync(&flctl->pdev->dev);
- }
- break;
- default:
- BUG();
- }
-}
-
-static void flctl_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(&flctl->done_buff[flctl->index], buf, len);
- flctl->index += len;
-}
-
-static uint8_t flctl_read_byte(struct nand_chip *chip)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- uint8_t data;
-
- data = flctl->done_buff[flctl->index];
- flctl->index++;
- return data;
-}
-
-static void flctl_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(buf, &flctl->done_buff[flctl->index], len);
- flctl->index += len;
-}
-
-static int flctl_chip_attach_chip(struct nand_chip *chip)
-{
- u64 targetsize = nanddev_target_size(&chip->base);
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
-
- /*
- * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
- * Add the SEL_16BIT flag in flctl->flcmncr_base.
- */
- if (chip->options & NAND_BUSWIDTH_16)
- flctl->flcmncr_base |= SEL_16BIT;
-
- if (mtd->writesize == 512) {
- flctl->page_size = 0;
- if (targetsize > (32 << 20)) {
- /* big than 32MB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (2 << 16)) {
- /* big than 128KB */
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_2;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- } else {
- flctl->page_size = 1;
- if (targetsize > (128 << 20)) {
- /* big than 128MB */
- flctl->rw_ADRCNT = ADRCNT2_E;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (8 << 16)) {
- /* big than 512KB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- }
-
- if (flctl->hwecc) {
- if (mtd->writesize == 512) {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops);
- chip->badblock_pattern = &flctl_4secc_smallpage;
- } else {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops);
- chip->badblock_pattern = &flctl_4secc_largepage;
- }
-
- chip->ecc.size = 512;
- chip->ecc.bytes = 10;
- chip->ecc.strength = 4;
- chip->ecc.read_page = flctl_read_page_hwecc;
- chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-
- /* 4 symbols ECC enabled */
- flctl->flcmncr_base |= _4ECCEN;
- } else {
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
- chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
- }
-
- return 0;
-}
-
-static const struct nand_controller_ops flctl_nand_controller_ops = {
- .attach_chip = flctl_chip_attach_chip,
-};
-
-static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
-{
- struct sh_flctl *flctl = dev_id;
-
- dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-
- return IRQ_HANDLED;
-}
-
-struct flctl_soc_config {
- unsigned long flcmncr_val;
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-};
-
-static struct flctl_soc_config flctl_sh7372_config = {
- .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
- .has_hwecc = 1,
- .use_holden = 1,
-};
-
-static const struct of_device_id of_flctl_match[] = {
- { .compatible = "renesas,shmobile-flctl-sh7372",
- .data = &flctl_sh7372_config },
- {},
-};
-MODULE_DEVICE_TABLE(of, of_flctl_match);
-
-static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
-{
- const struct flctl_soc_config *config;
- struct sh_flctl_platform_data *pdata;
-
- config = of_device_get_match_data(dev);
- if (!config) {
- dev_err(dev, "%s: no OF configuration attached\n", __func__);
- return NULL;
- }
-
- pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- /* set SoC specific options */
- pdata->flcmncr_val = config->flcmncr_val;
- pdata->has_hwecc = config->has_hwecc;
- pdata->use_holden = config->use_holden;
-
- return pdata;
-}
-
-static int flctl_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct sh_flctl *flctl;
- struct mtd_info *flctl_mtd;
- struct nand_chip *nand;
- struct sh_flctl_platform_data *pdata;
- int ret;
- int irq;
-
- flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
- if (!flctl)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- flctl->reg = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(flctl->reg))
- return PTR_ERR(flctl->reg);
- flctl->fifo = res->start + 0x24; /* FLDTFIFO */
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
- "flste", flctl);
- if (ret) {
- dev_err(&pdev->dev, "request interrupt failed.\n");
- return ret;
- }
-
- if (pdev->dev.of_node)
- pdata = flctl_parse_dt(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- if (!pdata) {
- dev_err(&pdev->dev, "no setup data defined\n");
- return -EINVAL;
- }
-
- platform_set_drvdata(pdev, flctl);
- nand = &flctl->chip;
- flctl_mtd = nand_to_mtd(nand);
- nand_set_flash_node(nand, pdev->dev.of_node);
- flctl_mtd->dev.parent = &pdev->dev;
- flctl->pdev = pdev;
- flctl->hwecc = pdata->has_hwecc;
- flctl->holden = pdata->use_holden;
- flctl->flcmncr_base = pdata->flcmncr_val;
- flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
-
- /* Set address of hardware control function */
- /* 20 us command delay time */
- nand->legacy.chip_delay = 20;
-
- nand->legacy.read_byte = flctl_read_byte;
- nand->legacy.write_buf = flctl_write_buf;
- nand->legacy.read_buf = flctl_read_buf;
- nand->legacy.select_chip = flctl_select_chip;
- nand->legacy.cmdfunc = flctl_cmdfunc;
- nand->legacy.set_features = nand_get_set_features_notsupp;
- nand->legacy.get_features = nand_get_set_features_notsupp;
-
- if (pdata->flcmncr_val & SEL_16BIT)
- nand->options |= NAND_BUSWIDTH_16;
-
- nand->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- flctl_setup_dma(flctl);
-
- nand->legacy.dummy_controller.ops = &flctl_nand_controller_ops;
- ret = nand_scan(nand, 1);
- if (ret)
- goto err_chip;
-
- ret = mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
- if (ret)
- goto cleanup_nand;
-
- return 0;
-
-cleanup_nand:
- nand_cleanup(nand);
-err_chip:
- flctl_release_dma(flctl);
- pm_runtime_disable(&pdev->dev);
- return ret;
-}
-
-static int flctl_remove(struct platform_device *pdev)
-{
- struct sh_flctl *flctl = platform_get_drvdata(pdev);
- struct nand_chip *chip = &flctl->chip;
- int ret;
-
- flctl_release_dma(flctl);
- ret = mtd_device_unregister(nand_to_mtd(chip));
- WARN_ON(ret);
- nand_cleanup(chip);
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static struct platform_driver flctl_driver = {
- .remove = flctl_remove,
- .driver = {
- .name = "sh_flctl",
- .of_match_table = of_flctl_match,
- },
-};
-
-module_platform_driver_probe(flctl_driver, flctl_probe);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_DESCRIPTION("SuperH FLCTL driver");
-MODULE_ALIAS("platform:sh_flctl");
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
deleted file mode 100644
index 78fc2d4218c808..00000000000000
--- a/include/linux/mtd/sh_flctl.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SuperH FLCTL nand controller
- *
- * Copyright © 2008 Renesas Solutions Corp.
- */
-
-#ifndef __SH_FLCTL_H__
-#define __SH_FLCTL_H__
-
-#include <linux/completion.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pm_qos.h>
-
-/* FLCTL registers */
-#define FLCMNCR(f) (f->reg + 0x0)
-#define FLCMDCR(f) (f->reg + 0x4)
-#define FLCMCDR(f) (f->reg + 0x8)
-#define FLADR(f) (f->reg + 0xC)
-#define FLADR2(f) (f->reg + 0x3C)
-#define FLDATAR(f) (f->reg + 0x10)
-#define FLDTCNTR(f) (f->reg + 0x14)
-#define FLINTDMACR(f) (f->reg + 0x18)
-#define FLBSYTMR(f) (f->reg + 0x1C)
-#define FLBSYCNT(f) (f->reg + 0x20)
-#define FLDTFIFO(f) (f->reg + 0x24)
-#define FLECFIFO(f) (f->reg + 0x28)
-#define FLTRCR(f) (f->reg + 0x2C)
-#define FLHOLDCR(f) (f->reg + 0x38)
-#define FL4ECCRESULT0(f) (f->reg + 0x80)
-#define FL4ECCRESULT1(f) (f->reg + 0x84)
-#define FL4ECCRESULT2(f) (f->reg + 0x88)
-#define FL4ECCRESULT3(f) (f->reg + 0x8C)
-#define FL4ECCCR(f) (f->reg + 0x90)
-#define FL4ECCCNT(f) (f->reg + 0x94)
-#define FLERRADR(f) (f->reg + 0x98)
-
-/* FLCMNCR control bits */
-#define _4ECCCNTEN (0x1 << 24)
-#define _4ECCEN (0x1 << 23)
-#define _4ECCCORRECT (0x1 << 22)
-#define SHBUSSEL (0x1 << 20)
-#define SEL_16BIT (0x1 << 19)
-#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
-#define QTSEL_E (0x1 << 17)
-#define ENDIAN (0x1 << 16) /* 1 = little endian */
-#define FCKSEL_E (0x1 << 15)
-#define ACM_SACCES_MODE (0x01 << 10)
-#define NANWF_E (0x1 << 9)
-#define SE_D (0x1 << 8) /* Spare area disable */
-#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
-#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
-#define TYPESEL_SET (0x1 << 0)
-
-/*
- * Clock settings using the PULSEx registers from FLCMNCR
- *
- * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
- * to control the clock divider used between the High-Speed Peripheral Clock
- * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
- * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
- * signals.
- */
-#define PULSE3 (0x1 << 27)
-#define PULSE2 (0x1 << 17)
-#define PULSE1 (0x1 << 15)
-#define PULSE0 (0x1 << 9)
-#define CLK_8B_0_5 PULSE1
-#define CLK_8B_1 0x0
-#define CLK_8B_1_5 (PULSE1 | PULSE2)
-#define CLK_8B_2 PULSE0
-#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
-#define CLK_8B_4 (PULSE0 | PULSE2)
-#define CLK_16B_6L_2H PULSE0
-#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
-#define CLK_16B_12L_4H (PULSE0 | PULSE2)
-
-/* FLCMDCR control bits */
-#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
-#define ADRMD_E (0x1 << 26) /* Sector address access */
-#define CDSRC_E (0x1 << 25) /* Data buffer selection */
-#define DOSR_E (0x1 << 24) /* Status read check */
-#define SELRW (0x1 << 21) /* 0:read 1:write */
-#define DOADR_E (0x1 << 20) /* Address stage execute */
-#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
-#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
-#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
-#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
-#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
-#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
-
-/* FLINTDMACR control bits */
-#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */
-#define AC1CLR (0x1 << 19) /* ECC FIFO clear */
-#define AC0CLR (0x1 << 18) /* Data FIFO clear */
-#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */
-#define ECERB (0x1 << 9) /* ECC error */
-#define STERB (0x1 << 8) /* Status error */
-#define STERINTE (0x1 << 4) /* Status error enable */
-
-/* FLTRCR control bits */
-#define TRSTRT (0x1 << 0) /* translation start */
-#define TREND (0x1 << 1) /* translation end */
-
-/*
- * FLHOLDCR control bits
- *
- * HOLDEN: Bus Occupancy Enable (inverted)
- * Enable this bit when the external bus might be used in between transfers.
- * If not set and the bus gets used by other modules, a deadlock occurs.
- */
-#define HOLDEN (0x1 << 0)
-
-/* FL4ECCCR control bits */
-#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
-#define _4ECCEND (0x1 << 1) /* 4 symbols end */
-#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
-
-#define LOOP_TIMEOUT_MAX 0x00010000
-
-enum flctl_ecc_res_t {
- FL_SUCCESS,
- FL_REPAIRABLE,
- FL_ERROR,
- FL_TIMEOUT
-};
-
-struct dma_chan;
-
-struct sh_flctl {
- struct nand_chip chip;
- struct platform_device *pdev;
- struct dev_pm_qos_request pm_qos;
- void __iomem *reg;
- resource_size_t fifo;
-
- uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
- int read_bytes;
- unsigned int index;
- int seqin_column; /* column in SEQIN cmd */
- int seqin_page_addr; /* page_addr in SEQIN cmd */
- uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
- int erase1_page_addr; /* page_addr in ERASE1 cmd */
- uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
- uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
- uint32_t flcmncr_base; /* base value of FLCMNCR */
- uint32_t flintdmacr_base; /* irq enable bits */
-
- unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
- unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
- unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
- unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
-
- /* DMA related objects */
- struct dma_chan *chan_fifo0_rx;
- struct dma_chan *chan_fifo0_tx;
- struct completion dma_complete;
-};
-
-struct sh_flctl_platform_data {
- struct mtd_partition *parts;
- int nr_parts;
- unsigned long flcmncr_val;
-
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-
- unsigned int slave_id_fifo0_tx;
- unsigned int slave_id_fifo0_rx;
-};
-
-static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
-{
- return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
-}
-
-#endif /* __SH_FLCTL_H__ */
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/mtd/nand/raw/Kconfig | 8 -
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
include/linux/mtd/sh_flctl.h | 180 -----
4 files changed, 1423 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
delete mode 100644 include/linux/mtd/sh_flctl.h
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 98ea1c9e65c8ef..20a4988ea418d5 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -284,14 +284,6 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
-config MTD_NAND_SH_FLCTL
- tristate "Renesas SuperH FLCTL NAND controller"
- depends on SUPERH || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL.
-
config MTD_NAND_DAVINCI
tristate "DaVinci/Keystone NAND controller"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index fa1d0012031012..2c6eb25c9d0aae 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o
obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
-obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
deleted file mode 100644
index a278829469d610..00000000000000
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ /dev/null
@@ -1,1234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH FLCTL nand controller
- *
- * Copyright (c) 2008 Renesas Solutions Corp.
- * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
- *
- * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/sh_flctl.h>
-
-static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section)
- return -ERANGE;
-
- oobregion->offset = 0;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section)
- return -ERANGE;
-
- oobregion->offset = 12;
- oobregion->length = 4;
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = {
- .ecc = flctl_4secc_ooblayout_sp_ecc,
- .free = flctl_4secc_ooblayout_sp_free,
-};
-
-static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = (section * 16) + 6;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = section * 16;
- oobregion->length = 6;
-
- if (!section) {
- oobregion->offset += 2;
- oobregion->length -= 2;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
- .ecc = flctl_4secc_ooblayout_lp_ecc,
- .free = flctl_4secc_ooblayout_lp_free,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr flctl_4secc_smallpage = {
- .offs = 11,
- .len = 1,
- .pattern = scan_ff_pattern,
-};
-
-static struct nand_bbt_descr flctl_4secc_largepage = {
- .offs = 0,
- .len = 2,
- .pattern = scan_ff_pattern,
-};
-
-static void empty_fifo(struct sh_flctl *flctl)
-{
- writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-}
-
-static void start_translation(struct sh_flctl *flctl)
-{
- writeb(TRSTRT, FLTRCR(flctl));
-}
-
-static void timeout_error(struct sh_flctl *flctl, const char *str)
-{
- dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
-}
-
-static void wait_completion(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- if (readb(FLTRCR(flctl)) & TREND) {
- writeb(0x0, FLTRCR(flctl));
- return;
- }
- udelay(1);
- }
-
- timeout_error(flctl, __func__);
- writeb(0x0, FLTRCR(flctl));
-}
-
-static void flctl_dma_complete(void *param)
-{
- struct sh_flctl *flctl = param;
-
- complete(&flctl->dma_complete);
-}
-
-static void flctl_release_dma(struct sh_flctl *flctl)
-{
- if (flctl->chan_fifo0_rx) {
- dma_release_channel(flctl->chan_fifo0_rx);
- flctl->chan_fifo0_rx = NULL;
- }
- if (flctl->chan_fifo0_tx) {
- dma_release_channel(flctl->chan_fifo0_tx);
- flctl->chan_fifo0_tx = NULL;
- }
-}
-
-static void flctl_setup_dma(struct sh_flctl *flctl)
-{
- dma_cap_mask_t mask;
- struct dma_slave_config cfg;
- struct platform_device *pdev = flctl->pdev;
- struct sh_flctl_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret;
-
- if (!pdata)
- return;
-
- if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
- return;
-
- /* We can only either use DMA for both Tx and Rx or not use it at all */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_tx);
- dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
- flctl->chan_fifo0_tx);
-
- if (!flctl->chan_fifo0_tx)
- return;
-
- memset(&cfg, 0, sizeof(cfg));
- cfg.direction = DMA_MEM_TO_DEV;
- cfg.dst_addr = flctl->fifo;
- cfg.src_addr = 0;
- ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
- if (ret < 0)
- goto err;
-
- flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_rx);
- dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
- flctl->chan_fifo0_rx);
-
- if (!flctl->chan_fifo0_rx)
- goto err;
-
- cfg.direction = DMA_DEV_TO_MEM;
- cfg.dst_addr = 0;
- cfg.src_addr = flctl->fifo;
- ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
- if (ret < 0)
- goto err;
-
- init_completion(&flctl->dma_complete);
-
- return;
-
-err:
- flctl_release_dma(flctl);
-}
-
-static void set_addr(struct mtd_info *mtd, int column, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t addr = 0;
-
- if (column == -1) {
- addr = page_addr; /* ERASE1 */
- } else if (page_addr != -1) {
- /* SEQIN, READ0, etc.. */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- if (flctl->page_size) {
- addr = column & 0x0FFF;
- addr |= (page_addr & 0xff) << 16;
- addr |= ((page_addr >> 8) & 0xff) << 24;
- /* big than 128MB */
- if (flctl->rw_ADRCNT == ADRCNT2_E) {
- uint32_t addr2;
- addr2 = (page_addr >> 16) & 0xff;
- writel(addr2, FLADR2(flctl));
- }
- } else {
- addr = column;
- addr |= (page_addr & 0xff) << 8;
- addr |= ((page_addr >> 8) & 0xff) << 16;
- addr |= ((page_addr >> 16) & 0xff) << 24;
- }
- }
- writel(addr, FLADR(flctl));
-}
-
-static void wait_rfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- uint32_t val;
- /* check FIFO */
- val = readl(FLDTCNTR(flctl)) >> 16;
- if (val & 0xFF)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static void wait_wfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t len, timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- /* check FIFO */
- len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static enum flctl_ecc_res_t wait_recfifo_ready
- (struct sh_flctl *flctl, int sector_number)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- void __iomem *ecc_reg[4];
- int i;
- int state = FL_SUCCESS;
- uint32_t data, size;
-
- /*
- * First this loops checks in FLDTCNTR if we are ready to read out the
- * oob data. This is the case if either all went fine without errors or
- * if the bottom part of the loop corrected the errors or marked them as
- * uncorrectable and the controller is given time to push the data into
- * the FIFO.
- */
- while (timeout--) {
- /* check if all is ok and we can read out the OOB */
- size = readl(FLDTCNTR(flctl)) >> 24;
- if ((size & 0xFF) == 4)
- return state;
-
- /* check if a correction code has been calculated */
- if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
- /*
- * either we wait for the fifo to be filled or a
- * correction pattern is being generated
- */
- udelay(1);
- continue;
- }
-
- /* check for an uncorrectable error */
- if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
- /* check if we face a non-empty page */
- for (i = 0; i < 512; i++) {
- if (flctl->done_buff[i] != 0xff) {
- state = FL_ERROR; /* can't correct */
- break;
- }
- }
-
- if (state == FL_SUCCESS)
- dev_dbg(&flctl->pdev->dev,
- "reading empty sector %d, ecc error ignored\n",
- sector_number);
-
- writel(0, FL4ECCCR(flctl));
- continue;
- }
-
- /* start error correction */
- ecc_reg[0] = FL4ECCRESULT0(flctl);
- ecc_reg[1] = FL4ECCRESULT1(flctl);
- ecc_reg[2] = FL4ECCRESULT2(flctl);
- ecc_reg[3] = FL4ECCRESULT3(flctl);
-
- for (i = 0; i < 3; i++) {
- uint8_t org;
- unsigned int index;
-
- data = readl(ecc_reg[i]);
-
- if (flctl->page_size)
- index = (512 * sector_number) +
- (data >> 16);
- else
- index = data >> 16;
-
- org = flctl->done_buff[index];
- flctl->done_buff[index] = org ^ (data & 0xFF);
- }
- state = FL_REPAIRABLE;
- writel(0, FL4ECCCR(flctl));
- }
-
- timeout_error(flctl, __func__);
- return FL_TIMEOUT; /* timeout */
-}
-
-static void wait_wecfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- uint32_t len;
-
- while (timeout--) {
- /* check FLECFIFO */
- len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
- int len, enum dma_data_direction dir)
-{
- struct dma_async_tx_descriptor *desc = NULL;
- struct dma_chan *chan;
- enum dma_transfer_direction tr_dir;
- dma_addr_t dma_addr;
- dma_cookie_t cookie;
- uint32_t reg;
- int ret = 0;
- unsigned long time_left;
-
- if (dir == DMA_FROM_DEVICE) {
- chan = flctl->chan_fifo0_rx;
- tr_dir = DMA_DEV_TO_MEM;
- } else {
- chan = flctl->chan_fifo0_tx;
- tr_dir = DMA_MEM_TO_DEV;
- }
-
- dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
-
- if (!dma_mapping_error(chan->device->dev, dma_addr))
- desc = dmaengine_prep_slave_single(chan, dma_addr, len,
- tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-
- if (desc) {
- reg = readl(FLINTDMACR(flctl));
- reg |= DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- desc->callback = flctl_dma_complete;
- desc->callback_param = flctl;
- cookie = dmaengine_submit(desc);
- if (dma_submit_error(cookie)) {
- ret = dma_submit_error(cookie);
- dev_warn(&flctl->pdev->dev,
- "DMA submit failed, falling back to PIO\n");
- goto out;
- }
-
- dma_async_issue_pending(chan);
- } else {
- /* DMA failed, fall back to PIO */
- flctl_release_dma(flctl);
- dev_warn(&flctl->pdev->dev,
- "DMA failed, falling back to PIO\n");
- ret = -EIO;
- goto out;
- }
-
- time_left =
- wait_for_completion_timeout(&flctl->dma_complete,
- msecs_to_jiffies(3000));
-
- if (time_left == 0) {
- dmaengine_terminate_all(chan);
- dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
- ret = -ETIMEDOUT;
- }
-
-out:
- reg = readl(FLINTDMACR(flctl));
- reg &= ~DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- dma_unmap_single(chan->device->dev, dma_addr, len, dir);
-
- /* ret == 0 is success */
- return ret;
-}
-
-static void read_datareg(struct sh_flctl *flctl, int offset)
-{
- unsigned long data;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- wait_completion(flctl);
-
- data = readl(FLDATAR(flctl));
- *buf = le32_to_cpu(data);
-}
-
-static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_rx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
- goto convert; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_rfifo_ready(flctl);
- buf[i] = readl(FLDTFIFO(flctl));
- }
-
-convert:
- for (i = 0; i < len_4align; i++)
- buf[i] = be32_to_cpu(buf[i]);
-}
-
-static enum flctl_ecc_res_t read_ecfiforeg
- (struct sh_flctl *flctl, uint8_t *buff, int sector)
-{
- int i;
- enum flctl_ecc_res_t res;
- unsigned long *ecc_buf = (unsigned long *)buff;
-
- res = wait_recfifo_ready(flctl , sector);
-
- if (res != FL_ERROR) {
- for (i = 0; i < 4; i++) {
- ecc_buf[i] = readl(FLECFIFO(flctl));
- ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
- }
- }
-
- return res;
-}
-
-static void write_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
- for (i = 0; i < len_4align; i++) {
- wait_wfifo_ready(flctl);
- writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
- }
-}
-
-static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- for (i = 0; i < len_4align; i++)
- buf[i] = cpu_to_be32(buf[i]);
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_tx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
- return; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_wecfifo_ready(flctl);
- writel(buf[i], FLECFIFO(flctl));
- }
-}
-
-static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
- uint32_t flcmdcr_val, addr_len_bytes = 0;
-
- /* Set SNAND bit if page size is 2048byte */
- if (flctl->page_size)
- flcmncr_val |= SNAND_E;
- else
- flcmncr_val &= ~SNAND_E;
-
- /* default FLCMDCR val */
- flcmdcr_val = DOCMD1_E | DOADR_E;
-
- /* Set for FLCMDCR */
- switch (cmd) {
- case NAND_CMD_ERASE1:
- addr_len_bytes = flctl->erase_ADRCNT;
- flcmdcr_val |= DOCMD2_E;
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_READOOB:
- case NAND_CMD_RNDOUT:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= CDSRC_E;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_SEQIN:
- /* This case is that cmd is READ0 or READ1 or READ00 */
- flcmdcr_val &= ~DOADR_E; /* ONLY execute 1st cmd */
- break;
- case NAND_CMD_PAGEPROG:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_READID:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val |= CDSRC_E;
- addr_len_bytes = ADRCNT_1;
- break;
- case NAND_CMD_STATUS:
- case NAND_CMD_RESET:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val &= ~(DOADR_E | DOSR_E);
- break;
- default:
- break;
- }
-
- /* Set address bytes parameter */
- flcmdcr_val |= addr_len_bytes;
-
- /* Now actually write */
- writel(flcmncr_val, FLCMNCR(flctl));
- writel(flcmdcr_val, FLCMDCR(flctl));
- writel(flcmcdr_val, FLCMCDR(flctl));
-}
-
-static int flctl_read_page_hwecc(struct nand_chip *chip, uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_read_page_op(chip, page, 0, buf, mtd->writesize);
- if (oob_required)
- chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize);
- return 0;
-}
-
-static int flctl_write_page_hwecc(struct nand_chip *chip, const uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
- chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
- return nand_prog_page_end_op(chip);
-}
-
-static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int sector, page_sectors;
- enum flctl_ecc_res_t ecc_result;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
- FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
-
- empty_fifo(flctl);
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- read_fiforeg(flctl, 512, 512 * sector);
-
- ecc_result = read_ecfiforeg(flctl,
- &flctl->done_buff[mtd->writesize + 16 * sector],
- sector);
-
- switch (ecc_result) {
- case FL_REPAIRABLE:
- dev_info(&flctl->pdev->dev,
- "applied ecc on page 0x%x", page_addr);
- mtd->ecc_stats.corrected++;
- break;
- case FL_ERROR:
- dev_warn(&flctl->pdev->dev,
- "page 0x%x contains corrupted data\n",
- page_addr);
- mtd->ecc_stats.failed++;
- break;
- default:
- ;
- }
- }
-
- wait_completion(flctl);
-
- writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
- FLCMNCR(flctl));
-}
-
-static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_sectors = flctl->page_size ? 4 : 1;
- int i;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- empty_fifo(flctl);
-
- for (i = 0; i < page_sectors; i++) {
- set_addr(mtd, (512 + 16) * i + 512 , page_addr);
- writel(16, FLDTCNTR(flctl));
-
- start_translation(flctl);
- read_fiforeg(flctl, 16, 16 * i);
- wait_completion(flctl);
- }
-}
-
-static void execmd_write_page_sector(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- empty_fifo(flctl);
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- write_fiforeg(flctl, 512, 512 * sector);
- write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
- }
-
- wait_completion(flctl);
- writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
-}
-
-static void execmd_write_oob(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- set_addr(mtd, sector * 528 + 512, page_addr);
- writel(16, FLDTCNTR(flctl)); /* set read size */
-
- start_translation(flctl);
- write_fiforeg(flctl, 16, 16 * sector);
- wait_completion(flctl);
- }
-}
-
-static void flctl_cmdfunc(struct nand_chip *chip, unsigned int command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t read_cmd = 0;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
-
- flctl->read_bytes = 0;
- if (command != NAND_CMD_PAGEPROG)
- flctl->index = 0;
-
- switch (command) {
- case NAND_CMD_READ1:
- case NAND_CMD_READ0:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_page_sector(mtd, page_addr);
- break;
- }
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, 0, page_addr);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- flctl->index += column;
- goto read_normal_exit;
-
- case NAND_CMD_READOOB:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_oob(mtd, page_addr);
- break;
- }
-
- if (flctl->page_size) {
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | NAND_CMD_READ0);
- set_addr(mtd, mtd->writesize, page_addr);
- } else {
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, page_addr);
- }
- flctl->read_bytes = mtd->oobsize;
- goto read_normal_exit;
-
- case NAND_CMD_RNDOUT:
- if (flctl->hwecc)
- break;
-
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
- goto read_normal_exit;
-
- case NAND_CMD_READID:
- set_cmd_regs(mtd, command, command);
-
- /* READID is always performed using an 8-bit bus */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column <<= 1;
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = 8;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_ERASE1:
- flctl->erase1_page_addr = page_addr;
- break;
-
- case NAND_CMD_ERASE2:
- set_cmd_regs(mtd, NAND_CMD_ERASE1,
- (command << 8) | NAND_CMD_ERASE1);
- set_addr(mtd, -1, flctl->erase1_page_addr);
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_SEQIN:
- if (!flctl->page_size) {
- /* output read command */
- if (column >= mtd->writesize) {
- column -= mtd->writesize;
- read_cmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- read_cmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- read_cmd = NAND_CMD_READ1;
- }
- }
- flctl->seqin_column = column;
- flctl->seqin_page_addr = page_addr;
- flctl->seqin_read_cmd = read_cmd;
- break;
-
- case NAND_CMD_PAGEPROG:
- empty_fifo(flctl);
- if (!flctl->page_size) {
- set_cmd_regs(mtd, NAND_CMD_SEQIN,
- flctl->seqin_read_cmd);
- set_addr(mtd, -1, -1);
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- }
- if (flctl->hwecc) {
- /* write page with hwecc */
- if (flctl->seqin_column == mtd->writesize)
- execmd_write_oob(mtd);
- else if (!flctl->seqin_column)
- execmd_write_page_sector(mtd);
- else
- pr_err("Invalid address !?\n");
- break;
- }
- set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
- set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
- writel(flctl->index, FLDTCNTR(flctl)); /* set write size */
- start_translation(flctl);
- write_fiforeg(flctl, flctl->index, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_STATUS:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- flctl->read_bytes = 1;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
- break;
-
- case NAND_CMD_RESET:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- default:
- break;
- }
- goto runtime_exit;
-
-read_normal_exit:
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
-runtime_exit:
- pm_runtime_put_sync(&flctl->pdev->dev);
- return;
-}
-
-static void flctl_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- int ret;
-
- switch (chipnr) {
- case -1:
- flctl->flcmncr_base &= ~CE0_ENABLE;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(flctl->flcmncr_base, FLCMNCR(flctl));
-
- if (flctl->qos_request) {
- dev_pm_qos_remove_request(&flctl->pm_qos);
- flctl->qos_request = 0;
- }
-
- pm_runtime_put_sync(&flctl->pdev->dev);
- break;
- case 0:
- flctl->flcmncr_base |= CE0_ENABLE;
-
- if (!flctl->qos_request) {
- ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos,
- DEV_PM_QOS_RESUME_LATENCY,
- 100);
- if (ret < 0)
- dev_err(&flctl->pdev->dev,
- "PM QoS request failed: %d\n", ret);
- flctl->qos_request = 1;
- }
-
- if (flctl->holden) {
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(HOLDEN, FLHOLDCR(flctl));
- pm_runtime_put_sync(&flctl->pdev->dev);
- }
- break;
- default:
- BUG();
- }
-}
-
-static void flctl_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(&flctl->done_buff[flctl->index], buf, len);
- flctl->index += len;
-}
-
-static uint8_t flctl_read_byte(struct nand_chip *chip)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- uint8_t data;
-
- data = flctl->done_buff[flctl->index];
- flctl->index++;
- return data;
-}
-
-static void flctl_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(buf, &flctl->done_buff[flctl->index], len);
- flctl->index += len;
-}
-
-static int flctl_chip_attach_chip(struct nand_chip *chip)
-{
- u64 targetsize = nanddev_target_size(&chip->base);
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
-
- /*
- * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
- * Add the SEL_16BIT flag in flctl->flcmncr_base.
- */
- if (chip->options & NAND_BUSWIDTH_16)
- flctl->flcmncr_base |= SEL_16BIT;
-
- if (mtd->writesize == 512) {
- flctl->page_size = 0;
- if (targetsize > (32 << 20)) {
- /* big than 32MB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (2 << 16)) {
- /* big than 128KB */
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_2;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- } else {
- flctl->page_size = 1;
- if (targetsize > (128 << 20)) {
- /* big than 128MB */
- flctl->rw_ADRCNT = ADRCNT2_E;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (8 << 16)) {
- /* big than 512KB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- }
-
- if (flctl->hwecc) {
- if (mtd->writesize == 512) {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops);
- chip->badblock_pattern = &flctl_4secc_smallpage;
- } else {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops);
- chip->badblock_pattern = &flctl_4secc_largepage;
- }
-
- chip->ecc.size = 512;
- chip->ecc.bytes = 10;
- chip->ecc.strength = 4;
- chip->ecc.read_page = flctl_read_page_hwecc;
- chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-
- /* 4 symbols ECC enabled */
- flctl->flcmncr_base |= _4ECCEN;
- } else {
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
- chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
- }
-
- return 0;
-}
-
-static const struct nand_controller_ops flctl_nand_controller_ops = {
- .attach_chip = flctl_chip_attach_chip,
-};
-
-static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
-{
- struct sh_flctl *flctl = dev_id;
-
- dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-
- return IRQ_HANDLED;
-}
-
-struct flctl_soc_config {
- unsigned long flcmncr_val;
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-};
-
-static struct flctl_soc_config flctl_sh7372_config = {
- .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
- .has_hwecc = 1,
- .use_holden = 1,
-};
-
-static const struct of_device_id of_flctl_match[] = {
- { .compatible = "renesas,shmobile-flctl-sh7372",
- .data = &flctl_sh7372_config },
- {},
-};
-MODULE_DEVICE_TABLE(of, of_flctl_match);
-
-static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
-{
- const struct flctl_soc_config *config;
- struct sh_flctl_platform_data *pdata;
-
- config = of_device_get_match_data(dev);
- if (!config) {
- dev_err(dev, "%s: no OF configuration attached\n", __func__);
- return NULL;
- }
-
- pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- /* set SoC specific options */
- pdata->flcmncr_val = config->flcmncr_val;
- pdata->has_hwecc = config->has_hwecc;
- pdata->use_holden = config->use_holden;
-
- return pdata;
-}
-
-static int flctl_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct sh_flctl *flctl;
- struct mtd_info *flctl_mtd;
- struct nand_chip *nand;
- struct sh_flctl_platform_data *pdata;
- int ret;
- int irq;
-
- flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
- if (!flctl)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- flctl->reg = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(flctl->reg))
- return PTR_ERR(flctl->reg);
- flctl->fifo = res->start + 0x24; /* FLDTFIFO */
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
- "flste", flctl);
- if (ret) {
- dev_err(&pdev->dev, "request interrupt failed.\n");
- return ret;
- }
-
- if (pdev->dev.of_node)
- pdata = flctl_parse_dt(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- if (!pdata) {
- dev_err(&pdev->dev, "no setup data defined\n");
- return -EINVAL;
- }
-
- platform_set_drvdata(pdev, flctl);
- nand = &flctl->chip;
- flctl_mtd = nand_to_mtd(nand);
- nand_set_flash_node(nand, pdev->dev.of_node);
- flctl_mtd->dev.parent = &pdev->dev;
- flctl->pdev = pdev;
- flctl->hwecc = pdata->has_hwecc;
- flctl->holden = pdata->use_holden;
- flctl->flcmncr_base = pdata->flcmncr_val;
- flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
-
- /* Set address of hardware control function */
- /* 20 us command delay time */
- nand->legacy.chip_delay = 20;
-
- nand->legacy.read_byte = flctl_read_byte;
- nand->legacy.write_buf = flctl_write_buf;
- nand->legacy.read_buf = flctl_read_buf;
- nand->legacy.select_chip = flctl_select_chip;
- nand->legacy.cmdfunc = flctl_cmdfunc;
- nand->legacy.set_features = nand_get_set_features_notsupp;
- nand->legacy.get_features = nand_get_set_features_notsupp;
-
- if (pdata->flcmncr_val & SEL_16BIT)
- nand->options |= NAND_BUSWIDTH_16;
-
- nand->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- flctl_setup_dma(flctl);
-
- nand->legacy.dummy_controller.ops = &flctl_nand_controller_ops;
- ret = nand_scan(nand, 1);
- if (ret)
- goto err_chip;
-
- ret = mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
- if (ret)
- goto cleanup_nand;
-
- return 0;
-
-cleanup_nand:
- nand_cleanup(nand);
-err_chip:
- flctl_release_dma(flctl);
- pm_runtime_disable(&pdev->dev);
- return ret;
-}
-
-static int flctl_remove(struct platform_device *pdev)
-{
- struct sh_flctl *flctl = platform_get_drvdata(pdev);
- struct nand_chip *chip = &flctl->chip;
- int ret;
-
- flctl_release_dma(flctl);
- ret = mtd_device_unregister(nand_to_mtd(chip));
- WARN_ON(ret);
- nand_cleanup(chip);
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static struct platform_driver flctl_driver = {
- .remove = flctl_remove,
- .driver = {
- .name = "sh_flctl",
- .of_match_table = of_flctl_match,
- },
-};
-
-module_platform_driver_probe(flctl_driver, flctl_probe);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_DESCRIPTION("SuperH FLCTL driver");
-MODULE_ALIAS("platform:sh_flctl");
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
deleted file mode 100644
index 78fc2d4218c808..00000000000000
--- a/include/linux/mtd/sh_flctl.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SuperH FLCTL nand controller
- *
- * Copyright © 2008 Renesas Solutions Corp.
- */
-
-#ifndef __SH_FLCTL_H__
-#define __SH_FLCTL_H__
-
-#include <linux/completion.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pm_qos.h>
-
-/* FLCTL registers */
-#define FLCMNCR(f) (f->reg + 0x0)
-#define FLCMDCR(f) (f->reg + 0x4)
-#define FLCMCDR(f) (f->reg + 0x8)
-#define FLADR(f) (f->reg + 0xC)
-#define FLADR2(f) (f->reg + 0x3C)
-#define FLDATAR(f) (f->reg + 0x10)
-#define FLDTCNTR(f) (f->reg + 0x14)
-#define FLINTDMACR(f) (f->reg + 0x18)
-#define FLBSYTMR(f) (f->reg + 0x1C)
-#define FLBSYCNT(f) (f->reg + 0x20)
-#define FLDTFIFO(f) (f->reg + 0x24)
-#define FLECFIFO(f) (f->reg + 0x28)
-#define FLTRCR(f) (f->reg + 0x2C)
-#define FLHOLDCR(f) (f->reg + 0x38)
-#define FL4ECCRESULT0(f) (f->reg + 0x80)
-#define FL4ECCRESULT1(f) (f->reg + 0x84)
-#define FL4ECCRESULT2(f) (f->reg + 0x88)
-#define FL4ECCRESULT3(f) (f->reg + 0x8C)
-#define FL4ECCCR(f) (f->reg + 0x90)
-#define FL4ECCCNT(f) (f->reg + 0x94)
-#define FLERRADR(f) (f->reg + 0x98)
-
-/* FLCMNCR control bits */
-#define _4ECCCNTEN (0x1 << 24)
-#define _4ECCEN (0x1 << 23)
-#define _4ECCCORRECT (0x1 << 22)
-#define SHBUSSEL (0x1 << 20)
-#define SEL_16BIT (0x1 << 19)
-#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
-#define QTSEL_E (0x1 << 17)
-#define ENDIAN (0x1 << 16) /* 1 = little endian */
-#define FCKSEL_E (0x1 << 15)
-#define ACM_SACCES_MODE (0x01 << 10)
-#define NANWF_E (0x1 << 9)
-#define SE_D (0x1 << 8) /* Spare area disable */
-#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
-#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
-#define TYPESEL_SET (0x1 << 0)
-
-/*
- * Clock settings using the PULSEx registers from FLCMNCR
- *
- * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
- * to control the clock divider used between the High-Speed Peripheral Clock
- * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
- * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
- * signals.
- */
-#define PULSE3 (0x1 << 27)
-#define PULSE2 (0x1 << 17)
-#define PULSE1 (0x1 << 15)
-#define PULSE0 (0x1 << 9)
-#define CLK_8B_0_5 PULSE1
-#define CLK_8B_1 0x0
-#define CLK_8B_1_5 (PULSE1 | PULSE2)
-#define CLK_8B_2 PULSE0
-#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
-#define CLK_8B_4 (PULSE0 | PULSE2)
-#define CLK_16B_6L_2H PULSE0
-#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
-#define CLK_16B_12L_4H (PULSE0 | PULSE2)
-
-/* FLCMDCR control bits */
-#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
-#define ADRMD_E (0x1 << 26) /* Sector address access */
-#define CDSRC_E (0x1 << 25) /* Data buffer selection */
-#define DOSR_E (0x1 << 24) /* Status read check */
-#define SELRW (0x1 << 21) /* 0:read 1:write */
-#define DOADR_E (0x1 << 20) /* Address stage execute */
-#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
-#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
-#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
-#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
-#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
-#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
-
-/* FLINTDMACR control bits */
-#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */
-#define AC1CLR (0x1 << 19) /* ECC FIFO clear */
-#define AC0CLR (0x1 << 18) /* Data FIFO clear */
-#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */
-#define ECERB (0x1 << 9) /* ECC error */
-#define STERB (0x1 << 8) /* Status error */
-#define STERINTE (0x1 << 4) /* Status error enable */
-
-/* FLTRCR control bits */
-#define TRSTRT (0x1 << 0) /* translation start */
-#define TREND (0x1 << 1) /* translation end */
-
-/*
- * FLHOLDCR control bits
- *
- * HOLDEN: Bus Occupancy Enable (inverted)
- * Enable this bit when the external bus might be used in between transfers.
- * If not set and the bus gets used by other modules, a deadlock occurs.
- */
-#define HOLDEN (0x1 << 0)
-
-/* FL4ECCCR control bits */
-#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
-#define _4ECCEND (0x1 << 1) /* 4 symbols end */
-#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
-
-#define LOOP_TIMEOUT_MAX 0x00010000
-
-enum flctl_ecc_res_t {
- FL_SUCCESS,
- FL_REPAIRABLE,
- FL_ERROR,
- FL_TIMEOUT
-};
-
-struct dma_chan;
-
-struct sh_flctl {
- struct nand_chip chip;
- struct platform_device *pdev;
- struct dev_pm_qos_request pm_qos;
- void __iomem *reg;
- resource_size_t fifo;
-
- uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
- int read_bytes;
- unsigned int index;
- int seqin_column; /* column in SEQIN cmd */
- int seqin_page_addr; /* page_addr in SEQIN cmd */
- uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
- int erase1_page_addr; /* page_addr in ERASE1 cmd */
- uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
- uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
- uint32_t flcmncr_base; /* base value of FLCMNCR */
- uint32_t flintdmacr_base; /* irq enable bits */
-
- unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
- unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
- unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
- unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
-
- /* DMA related objects */
- struct dma_chan *chan_fifo0_rx;
- struct dma_chan *chan_fifo0_tx;
- struct completion dma_complete;
-};
-
-struct sh_flctl_platform_data {
- struct mtd_partition *parts;
- int nr_parts;
- unsigned long flcmncr_val;
-
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-
- unsigned int slave_id_fifo0_tx;
- unsigned int slave_id_fifo0_rx;
-};
-
-static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
-{
- return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
-}
-
-#endif /* __SH_FLCTL_H__ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/mtd/nand/raw/Kconfig | 8 -
drivers/mtd/nand/raw/Makefile | 1 -
drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
include/linux/mtd/sh_flctl.h | 180 -----
4 files changed, 1423 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
delete mode 100644 include/linux/mtd/sh_flctl.h
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 98ea1c9e65c8ef..20a4988ea418d5 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -284,14 +284,6 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
-config MTD_NAND_SH_FLCTL
- tristate "Renesas SuperH FLCTL NAND controller"
- depends on SUPERH || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Several Renesas SuperH CPU has FLCTL. This option enables support
- for NAND Flash using FLCTL.
-
config MTD_NAND_DAVINCI
tristate "DaVinci/Keystone NAND controller"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index fa1d0012031012..2c6eb25c9d0aae 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o
obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
-obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
deleted file mode 100644
index a278829469d610..00000000000000
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ /dev/null
@@ -1,1234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH FLCTL nand controller
- *
- * Copyright (c) 2008 Renesas Solutions Corp.
- * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
- *
- * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/sh_dma.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/sh_flctl.h>
-
-static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section)
- return -ERANGE;
-
- oobregion->offset = 0;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section)
- return -ERANGE;
-
- oobregion->offset = 12;
- oobregion->length = 4;
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = {
- .ecc = flctl_4secc_ooblayout_sp_ecc,
- .free = flctl_4secc_ooblayout_sp_free,
-};
-
-static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = (section * 16) + 6;
- oobregion->length = chip->ecc.bytes;
-
- return 0;
-}
-
-static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- if (section >= chip->ecc.steps)
- return -ERANGE;
-
- oobregion->offset = section * 16;
- oobregion->length = 6;
-
- if (!section) {
- oobregion->offset += 2;
- oobregion->length -= 2;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
- .ecc = flctl_4secc_ooblayout_lp_ecc,
- .free = flctl_4secc_ooblayout_lp_free,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr flctl_4secc_smallpage = {
- .offs = 11,
- .len = 1,
- .pattern = scan_ff_pattern,
-};
-
-static struct nand_bbt_descr flctl_4secc_largepage = {
- .offs = 0,
- .len = 2,
- .pattern = scan_ff_pattern,
-};
-
-static void empty_fifo(struct sh_flctl *flctl)
-{
- writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-}
-
-static void start_translation(struct sh_flctl *flctl)
-{
- writeb(TRSTRT, FLTRCR(flctl));
-}
-
-static void timeout_error(struct sh_flctl *flctl, const char *str)
-{
- dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
-}
-
-static void wait_completion(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- if (readb(FLTRCR(flctl)) & TREND) {
- writeb(0x0, FLTRCR(flctl));
- return;
- }
- udelay(1);
- }
-
- timeout_error(flctl, __func__);
- writeb(0x0, FLTRCR(flctl));
-}
-
-static void flctl_dma_complete(void *param)
-{
- struct sh_flctl *flctl = param;
-
- complete(&flctl->dma_complete);
-}
-
-static void flctl_release_dma(struct sh_flctl *flctl)
-{
- if (flctl->chan_fifo0_rx) {
- dma_release_channel(flctl->chan_fifo0_rx);
- flctl->chan_fifo0_rx = NULL;
- }
- if (flctl->chan_fifo0_tx) {
- dma_release_channel(flctl->chan_fifo0_tx);
- flctl->chan_fifo0_tx = NULL;
- }
-}
-
-static void flctl_setup_dma(struct sh_flctl *flctl)
-{
- dma_cap_mask_t mask;
- struct dma_slave_config cfg;
- struct platform_device *pdev = flctl->pdev;
- struct sh_flctl_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret;
-
- if (!pdata)
- return;
-
- if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
- return;
-
- /* We can only either use DMA for both Tx and Rx or not use it at all */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_tx);
- dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
- flctl->chan_fifo0_tx);
-
- if (!flctl->chan_fifo0_tx)
- return;
-
- memset(&cfg, 0, sizeof(cfg));
- cfg.direction = DMA_MEM_TO_DEV;
- cfg.dst_addr = flctl->fifo;
- cfg.src_addr = 0;
- ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
- if (ret < 0)
- goto err;
-
- flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
- (void *)(uintptr_t)pdata->slave_id_fifo0_rx);
- dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
- flctl->chan_fifo0_rx);
-
- if (!flctl->chan_fifo0_rx)
- goto err;
-
- cfg.direction = DMA_DEV_TO_MEM;
- cfg.dst_addr = 0;
- cfg.src_addr = flctl->fifo;
- ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
- if (ret < 0)
- goto err;
-
- init_completion(&flctl->dma_complete);
-
- return;
-
-err:
- flctl_release_dma(flctl);
-}
-
-static void set_addr(struct mtd_info *mtd, int column, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t addr = 0;
-
- if (column == -1) {
- addr = page_addr; /* ERASE1 */
- } else if (page_addr != -1) {
- /* SEQIN, READ0, etc.. */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- if (flctl->page_size) {
- addr = column & 0x0FFF;
- addr |= (page_addr & 0xff) << 16;
- addr |= ((page_addr >> 8) & 0xff) << 24;
- /* big than 128MB */
- if (flctl->rw_ADRCNT == ADRCNT2_E) {
- uint32_t addr2;
- addr2 = (page_addr >> 16) & 0xff;
- writel(addr2, FLADR2(flctl));
- }
- } else {
- addr = column;
- addr |= (page_addr & 0xff) << 8;
- addr |= ((page_addr >> 8) & 0xff) << 16;
- addr |= ((page_addr >> 16) & 0xff) << 24;
- }
- }
- writel(addr, FLADR(flctl));
-}
-
-static void wait_rfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- uint32_t val;
- /* check FIFO */
- val = readl(FLDTCNTR(flctl)) >> 16;
- if (val & 0xFF)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static void wait_wfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t len, timeout = LOOP_TIMEOUT_MAX;
-
- while (timeout--) {
- /* check FIFO */
- len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static enum flctl_ecc_res_t wait_recfifo_ready
- (struct sh_flctl *flctl, int sector_number)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- void __iomem *ecc_reg[4];
- int i;
- int state = FL_SUCCESS;
- uint32_t data, size;
-
- /*
- * First this loops checks in FLDTCNTR if we are ready to read out the
- * oob data. This is the case if either all went fine without errors or
- * if the bottom part of the loop corrected the errors or marked them as
- * uncorrectable and the controller is given time to push the data into
- * the FIFO.
- */
- while (timeout--) {
- /* check if all is ok and we can read out the OOB */
- size = readl(FLDTCNTR(flctl)) >> 24;
- if ((size & 0xFF) == 4)
- return state;
-
- /* check if a correction code has been calculated */
- if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
- /*
- * either we wait for the fifo to be filled or a
- * correction pattern is being generated
- */
- udelay(1);
- continue;
- }
-
- /* check for an uncorrectable error */
- if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
- /* check if we face a non-empty page */
- for (i = 0; i < 512; i++) {
- if (flctl->done_buff[i] != 0xff) {
- state = FL_ERROR; /* can't correct */
- break;
- }
- }
-
- if (state == FL_SUCCESS)
- dev_dbg(&flctl->pdev->dev,
- "reading empty sector %d, ecc error ignored\n",
- sector_number);
-
- writel(0, FL4ECCCR(flctl));
- continue;
- }
-
- /* start error correction */
- ecc_reg[0] = FL4ECCRESULT0(flctl);
- ecc_reg[1] = FL4ECCRESULT1(flctl);
- ecc_reg[2] = FL4ECCRESULT2(flctl);
- ecc_reg[3] = FL4ECCRESULT3(flctl);
-
- for (i = 0; i < 3; i++) {
- uint8_t org;
- unsigned int index;
-
- data = readl(ecc_reg[i]);
-
- if (flctl->page_size)
- index = (512 * sector_number) +
- (data >> 16);
- else
- index = data >> 16;
-
- org = flctl->done_buff[index];
- flctl->done_buff[index] = org ^ (data & 0xFF);
- }
- state = FL_REPAIRABLE;
- writel(0, FL4ECCCR(flctl));
- }
-
- timeout_error(flctl, __func__);
- return FL_TIMEOUT; /* timeout */
-}
-
-static void wait_wecfifo_ready(struct sh_flctl *flctl)
-{
- uint32_t timeout = LOOP_TIMEOUT_MAX;
- uint32_t len;
-
- while (timeout--) {
- /* check FLECFIFO */
- len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
- if (len >= 4)
- return;
- udelay(1);
- }
- timeout_error(flctl, __func__);
-}
-
-static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
- int len, enum dma_data_direction dir)
-{
- struct dma_async_tx_descriptor *desc = NULL;
- struct dma_chan *chan;
- enum dma_transfer_direction tr_dir;
- dma_addr_t dma_addr;
- dma_cookie_t cookie;
- uint32_t reg;
- int ret = 0;
- unsigned long time_left;
-
- if (dir == DMA_FROM_DEVICE) {
- chan = flctl->chan_fifo0_rx;
- tr_dir = DMA_DEV_TO_MEM;
- } else {
- chan = flctl->chan_fifo0_tx;
- tr_dir = DMA_MEM_TO_DEV;
- }
-
- dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
-
- if (!dma_mapping_error(chan->device->dev, dma_addr))
- desc = dmaengine_prep_slave_single(chan, dma_addr, len,
- tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-
- if (desc) {
- reg = readl(FLINTDMACR(flctl));
- reg |= DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- desc->callback = flctl_dma_complete;
- desc->callback_param = flctl;
- cookie = dmaengine_submit(desc);
- if (dma_submit_error(cookie)) {
- ret = dma_submit_error(cookie);
- dev_warn(&flctl->pdev->dev,
- "DMA submit failed, falling back to PIO\n");
- goto out;
- }
-
- dma_async_issue_pending(chan);
- } else {
- /* DMA failed, fall back to PIO */
- flctl_release_dma(flctl);
- dev_warn(&flctl->pdev->dev,
- "DMA failed, falling back to PIO\n");
- ret = -EIO;
- goto out;
- }
-
- time_left =
- wait_for_completion_timeout(&flctl->dma_complete,
- msecs_to_jiffies(3000));
-
- if (time_left == 0) {
- dmaengine_terminate_all(chan);
- dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
- ret = -ETIMEDOUT;
- }
-
-out:
- reg = readl(FLINTDMACR(flctl));
- reg &= ~DREQ0EN;
- writel(reg, FLINTDMACR(flctl));
-
- dma_unmap_single(chan->device->dev, dma_addr, len, dir);
-
- /* ret == 0 is success */
- return ret;
-}
-
-static void read_datareg(struct sh_flctl *flctl, int offset)
-{
- unsigned long data;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- wait_completion(flctl);
-
- data = readl(FLDATAR(flctl));
- *buf = le32_to_cpu(data);
-}
-
-static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_rx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
- goto convert; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_rfifo_ready(flctl);
- buf[i] = readl(FLDTFIFO(flctl));
- }
-
-convert:
- for (i = 0; i < len_4align; i++)
- buf[i] = be32_to_cpu(buf[i]);
-}
-
-static enum flctl_ecc_res_t read_ecfiforeg
- (struct sh_flctl *flctl, uint8_t *buff, int sector)
-{
- int i;
- enum flctl_ecc_res_t res;
- unsigned long *ecc_buf = (unsigned long *)buff;
-
- res = wait_recfifo_ready(flctl , sector);
-
- if (res != FL_ERROR) {
- for (i = 0; i < 4; i++) {
- ecc_buf[i] = readl(FLECFIFO(flctl));
- ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
- }
- }
-
- return res;
-}
-
-static void write_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
- for (i = 0; i < len_4align; i++) {
- wait_wfifo_ready(flctl);
- writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
- }
-}
-
-static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
- unsigned int offset)
-{
- int i, len_4align;
- unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
-
- len_4align = (rlen + 3) / 4;
-
- for (i = 0; i < len_4align; i++)
- buf[i] = cpu_to_be32(buf[i]);
-
- /* initiate DMA transfer */
- if (flctl->chan_fifo0_tx && rlen >= 32 &&
- !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
- return; /* DMA success */
-
- /* do polling transfer */
- for (i = 0; i < len_4align; i++) {
- wait_wecfifo_ready(flctl);
- writel(buf[i], FLECFIFO(flctl));
- }
-}
-
-static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
- uint32_t flcmdcr_val, addr_len_bytes = 0;
-
- /* Set SNAND bit if page size is 2048byte */
- if (flctl->page_size)
- flcmncr_val |= SNAND_E;
- else
- flcmncr_val &= ~SNAND_E;
-
- /* default FLCMDCR val */
- flcmdcr_val = DOCMD1_E | DOADR_E;
-
- /* Set for FLCMDCR */
- switch (cmd) {
- case NAND_CMD_ERASE1:
- addr_len_bytes = flctl->erase_ADRCNT;
- flcmdcr_val |= DOCMD2_E;
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_READOOB:
- case NAND_CMD_RNDOUT:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= CDSRC_E;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_SEQIN:
- /* This case is that cmd is READ0 or READ1 or READ00 */
- flcmdcr_val &= ~DOADR_E; /* ONLY execute 1st cmd */
- break;
- case NAND_CMD_PAGEPROG:
- addr_len_bytes = flctl->rw_ADRCNT;
- flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- flcmncr_val |= SEL_16BIT;
- break;
- case NAND_CMD_READID:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val |= CDSRC_E;
- addr_len_bytes = ADRCNT_1;
- break;
- case NAND_CMD_STATUS:
- case NAND_CMD_RESET:
- flcmncr_val &= ~SNAND_E;
- flcmdcr_val &= ~(DOADR_E | DOSR_E);
- break;
- default:
- break;
- }
-
- /* Set address bytes parameter */
- flcmdcr_val |= addr_len_bytes;
-
- /* Now actually write */
- writel(flcmncr_val, FLCMNCR(flctl));
- writel(flcmdcr_val, FLCMDCR(flctl));
- writel(flcmcdr_val, FLCMCDR(flctl));
-}
-
-static int flctl_read_page_hwecc(struct nand_chip *chip, uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_read_page_op(chip, page, 0, buf, mtd->writesize);
- if (oob_required)
- chip->legacy.read_buf(chip, chip->oob_poi, mtd->oobsize);
- return 0;
-}
-
-static int flctl_write_page_hwecc(struct nand_chip *chip, const uint8_t *buf,
- int oob_required, int page)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
- chip->legacy.write_buf(chip, chip->oob_poi, mtd->oobsize);
- return nand_prog_page_end_op(chip);
-}
-
-static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int sector, page_sectors;
- enum flctl_ecc_res_t ecc_result;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
- FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
-
- empty_fifo(flctl);
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- read_fiforeg(flctl, 512, 512 * sector);
-
- ecc_result = read_ecfiforeg(flctl,
- &flctl->done_buff[mtd->writesize + 16 * sector],
- sector);
-
- switch (ecc_result) {
- case FL_REPAIRABLE:
- dev_info(&flctl->pdev->dev,
- "applied ecc on page 0x%x", page_addr);
- mtd->ecc_stats.corrected++;
- break;
- case FL_ERROR:
- dev_warn(&flctl->pdev->dev,
- "page 0x%x contains corrupted data\n",
- page_addr);
- mtd->ecc_stats.failed++;
- break;
- default:
- ;
- }
- }
-
- wait_completion(flctl);
-
- writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
- FLCMNCR(flctl));
-}
-
-static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_sectors = flctl->page_size ? 4 : 1;
- int i;
-
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
-
- empty_fifo(flctl);
-
- for (i = 0; i < page_sectors; i++) {
- set_addr(mtd, (512 + 16) * i + 512 , page_addr);
- writel(16, FLDTCNTR(flctl));
-
- start_translation(flctl);
- read_fiforeg(flctl, 16, 16 * i);
- wait_completion(flctl);
- }
-}
-
-static void execmd_write_page_sector(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- empty_fifo(flctl);
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
- writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
- writel(page_addr << 2, FLADR(flctl));
- start_translation(flctl);
-
- for (sector = 0; sector < page_sectors; sector++) {
- write_fiforeg(flctl, 512, 512 * sector);
- write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
- }
-
- wait_completion(flctl);
- writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
-}
-
-static void execmd_write_oob(struct mtd_info *mtd)
-{
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int page_addr = flctl->seqin_page_addr;
- int sector, page_sectors;
-
- page_sectors = flctl->page_size ? 4 : 1;
-
- set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
- (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
-
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- set_addr(mtd, sector * 528 + 512, page_addr);
- writel(16, FLDTCNTR(flctl)); /* set read size */
-
- start_translation(flctl);
- write_fiforeg(flctl, 16, 16 * sector);
- wait_completion(flctl);
- }
-}
-
-static void flctl_cmdfunc(struct nand_chip *chip, unsigned int command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t read_cmd = 0;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
-
- flctl->read_bytes = 0;
- if (command != NAND_CMD_PAGEPROG)
- flctl->index = 0;
-
- switch (command) {
- case NAND_CMD_READ1:
- case NAND_CMD_READ0:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_page_sector(mtd, page_addr);
- break;
- }
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, 0, page_addr);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize;
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column >>= 1;
- flctl->index += column;
- goto read_normal_exit;
-
- case NAND_CMD_READOOB:
- if (flctl->hwecc) {
- /* read page with hwecc */
- execmd_read_oob(mtd, page_addr);
- break;
- }
-
- if (flctl->page_size) {
- set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
- | NAND_CMD_READ0);
- set_addr(mtd, mtd->writesize, page_addr);
- } else {
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, page_addr);
- }
- flctl->read_bytes = mtd->oobsize;
- goto read_normal_exit;
-
- case NAND_CMD_RNDOUT:
- if (flctl->hwecc)
- break;
-
- if (flctl->page_size)
- set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
- | command);
- else
- set_cmd_regs(mtd, command, command);
-
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
- goto read_normal_exit;
-
- case NAND_CMD_READID:
- set_cmd_regs(mtd, command, command);
-
- /* READID is always performed using an 8-bit bus */
- if (flctl->chip.options & NAND_BUSWIDTH_16)
- column <<= 1;
- set_addr(mtd, column, 0);
-
- flctl->read_bytes = 8;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_ERASE1:
- flctl->erase1_page_addr = page_addr;
- break;
-
- case NAND_CMD_ERASE2:
- set_cmd_regs(mtd, NAND_CMD_ERASE1,
- (command << 8) | NAND_CMD_ERASE1);
- set_addr(mtd, -1, flctl->erase1_page_addr);
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_SEQIN:
- if (!flctl->page_size) {
- /* output read command */
- if (column >= mtd->writesize) {
- column -= mtd->writesize;
- read_cmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- read_cmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- read_cmd = NAND_CMD_READ1;
- }
- }
- flctl->seqin_column = column;
- flctl->seqin_page_addr = page_addr;
- flctl->seqin_read_cmd = read_cmd;
- break;
-
- case NAND_CMD_PAGEPROG:
- empty_fifo(flctl);
- if (!flctl->page_size) {
- set_cmd_regs(mtd, NAND_CMD_SEQIN,
- flctl->seqin_read_cmd);
- set_addr(mtd, -1, -1);
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- }
- if (flctl->hwecc) {
- /* write page with hwecc */
- if (flctl->seqin_column == mtd->writesize)
- execmd_write_oob(mtd);
- else if (!flctl->seqin_column)
- execmd_write_page_sector(mtd);
- else
- pr_err("Invalid address !?\n");
- break;
- }
- set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
- set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
- writel(flctl->index, FLDTCNTR(flctl)); /* set write size */
- start_translation(flctl);
- write_fiforeg(flctl, flctl->index, 0);
- wait_completion(flctl);
- break;
-
- case NAND_CMD_STATUS:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- flctl->read_bytes = 1;
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
- break;
-
- case NAND_CMD_RESET:
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, -1, -1);
-
- writel(0, FLDTCNTR(flctl)); /* set 0 size */
- start_translation(flctl);
- wait_completion(flctl);
- break;
-
- default:
- break;
- }
- goto runtime_exit;
-
-read_normal_exit:
- writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
- empty_fifo(flctl);
- start_translation(flctl);
- read_fiforeg(flctl, flctl->read_bytes, 0);
- wait_completion(flctl);
-runtime_exit:
- pm_runtime_put_sync(&flctl->pdev->dev);
- return;
-}
-
-static void flctl_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- int ret;
-
- switch (chipnr) {
- case -1:
- flctl->flcmncr_base &= ~CE0_ENABLE;
-
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(flctl->flcmncr_base, FLCMNCR(flctl));
-
- if (flctl->qos_request) {
- dev_pm_qos_remove_request(&flctl->pm_qos);
- flctl->qos_request = 0;
- }
-
- pm_runtime_put_sync(&flctl->pdev->dev);
- break;
- case 0:
- flctl->flcmncr_base |= CE0_ENABLE;
-
- if (!flctl->qos_request) {
- ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos,
- DEV_PM_QOS_RESUME_LATENCY,
- 100);
- if (ret < 0)
- dev_err(&flctl->pdev->dev,
- "PM QoS request failed: %d\n", ret);
- flctl->qos_request = 1;
- }
-
- if (flctl->holden) {
- pm_runtime_get_sync(&flctl->pdev->dev);
- writel(HOLDEN, FLHOLDCR(flctl));
- pm_runtime_put_sync(&flctl->pdev->dev);
- }
- break;
- default:
- BUG();
- }
-}
-
-static void flctl_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(&flctl->done_buff[flctl->index], buf, len);
- flctl->index += len;
-}
-
-static uint8_t flctl_read_byte(struct nand_chip *chip)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
- uint8_t data;
-
- data = flctl->done_buff[flctl->index];
- flctl->index++;
- return data;
-}
-
-static void flctl_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct sh_flctl *flctl = mtd_to_flctl(nand_to_mtd(chip));
-
- memcpy(buf, &flctl->done_buff[flctl->index], len);
- flctl->index += len;
-}
-
-static int flctl_chip_attach_chip(struct nand_chip *chip)
-{
- u64 targetsize = nanddev_target_size(&chip->base);
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct sh_flctl *flctl = mtd_to_flctl(mtd);
-
- /*
- * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
- * Add the SEL_16BIT flag in flctl->flcmncr_base.
- */
- if (chip->options & NAND_BUSWIDTH_16)
- flctl->flcmncr_base |= SEL_16BIT;
-
- if (mtd->writesize == 512) {
- flctl->page_size = 0;
- if (targetsize > (32 << 20)) {
- /* big than 32MB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (2 << 16)) {
- /* big than 128KB */
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_2;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- } else {
- flctl->page_size = 1;
- if (targetsize > (128 << 20)) {
- /* big than 128MB */
- flctl->rw_ADRCNT = ADRCNT2_E;
- flctl->erase_ADRCNT = ADRCNT_3;
- } else if (targetsize > (8 << 16)) {
- /* big than 512KB */
- flctl->rw_ADRCNT = ADRCNT_4;
- flctl->erase_ADRCNT = ADRCNT_2;
- } else {
- flctl->rw_ADRCNT = ADRCNT_3;
- flctl->erase_ADRCNT = ADRCNT_1;
- }
- }
-
- if (flctl->hwecc) {
- if (mtd->writesize == 512) {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops);
- chip->badblock_pattern = &flctl_4secc_smallpage;
- } else {
- mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops);
- chip->badblock_pattern = &flctl_4secc_largepage;
- }
-
- chip->ecc.size = 512;
- chip->ecc.bytes = 10;
- chip->ecc.strength = 4;
- chip->ecc.read_page = flctl_read_page_hwecc;
- chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
-
- /* 4 symbols ECC enabled */
- flctl->flcmncr_base |= _4ECCEN;
- } else {
- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
- chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
- }
-
- return 0;
-}
-
-static const struct nand_controller_ops flctl_nand_controller_ops = {
- .attach_chip = flctl_chip_attach_chip,
-};
-
-static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
-{
- struct sh_flctl *flctl = dev_id;
-
- dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
- writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
-
- return IRQ_HANDLED;
-}
-
-struct flctl_soc_config {
- unsigned long flcmncr_val;
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-};
-
-static struct flctl_soc_config flctl_sh7372_config = {
- .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
- .has_hwecc = 1,
- .use_holden = 1,
-};
-
-static const struct of_device_id of_flctl_match[] = {
- { .compatible = "renesas,shmobile-flctl-sh7372",
- .data = &flctl_sh7372_config },
- {},
-};
-MODULE_DEVICE_TABLE(of, of_flctl_match);
-
-static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
-{
- const struct flctl_soc_config *config;
- struct sh_flctl_platform_data *pdata;
-
- config = of_device_get_match_data(dev);
- if (!config) {
- dev_err(dev, "%s: no OF configuration attached\n", __func__);
- return NULL;
- }
-
- pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- /* set SoC specific options */
- pdata->flcmncr_val = config->flcmncr_val;
- pdata->has_hwecc = config->has_hwecc;
- pdata->use_holden = config->use_holden;
-
- return pdata;
-}
-
-static int flctl_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct sh_flctl *flctl;
- struct mtd_info *flctl_mtd;
- struct nand_chip *nand;
- struct sh_flctl_platform_data *pdata;
- int ret;
- int irq;
-
- flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
- if (!flctl)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- flctl->reg = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(flctl->reg))
- return PTR_ERR(flctl->reg);
- flctl->fifo = res->start + 0x24; /* FLDTFIFO */
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
- "flste", flctl);
- if (ret) {
- dev_err(&pdev->dev, "request interrupt failed.\n");
- return ret;
- }
-
- if (pdev->dev.of_node)
- pdata = flctl_parse_dt(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
-
- if (!pdata) {
- dev_err(&pdev->dev, "no setup data defined\n");
- return -EINVAL;
- }
-
- platform_set_drvdata(pdev, flctl);
- nand = &flctl->chip;
- flctl_mtd = nand_to_mtd(nand);
- nand_set_flash_node(nand, pdev->dev.of_node);
- flctl_mtd->dev.parent = &pdev->dev;
- flctl->pdev = pdev;
- flctl->hwecc = pdata->has_hwecc;
- flctl->holden = pdata->use_holden;
- flctl->flcmncr_base = pdata->flcmncr_val;
- flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
-
- /* Set address of hardware control function */
- /* 20 us command delay time */
- nand->legacy.chip_delay = 20;
-
- nand->legacy.read_byte = flctl_read_byte;
- nand->legacy.write_buf = flctl_write_buf;
- nand->legacy.read_buf = flctl_read_buf;
- nand->legacy.select_chip = flctl_select_chip;
- nand->legacy.cmdfunc = flctl_cmdfunc;
- nand->legacy.set_features = nand_get_set_features_notsupp;
- nand->legacy.get_features = nand_get_set_features_notsupp;
-
- if (pdata->flcmncr_val & SEL_16BIT)
- nand->options |= NAND_BUSWIDTH_16;
-
- nand->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- flctl_setup_dma(flctl);
-
- nand->legacy.dummy_controller.ops = &flctl_nand_controller_ops;
- ret = nand_scan(nand, 1);
- if (ret)
- goto err_chip;
-
- ret = mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
- if (ret)
- goto cleanup_nand;
-
- return 0;
-
-cleanup_nand:
- nand_cleanup(nand);
-err_chip:
- flctl_release_dma(flctl);
- pm_runtime_disable(&pdev->dev);
- return ret;
-}
-
-static int flctl_remove(struct platform_device *pdev)
-{
- struct sh_flctl *flctl = platform_get_drvdata(pdev);
- struct nand_chip *chip = &flctl->chip;
- int ret;
-
- flctl_release_dma(flctl);
- ret = mtd_device_unregister(nand_to_mtd(chip));
- WARN_ON(ret);
- nand_cleanup(chip);
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-static struct platform_driver flctl_driver = {
- .remove = flctl_remove,
- .driver = {
- .name = "sh_flctl",
- .of_match_table = of_flctl_match,
- },
-};
-
-module_platform_driver_probe(flctl_driver, flctl_probe);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_DESCRIPTION("SuperH FLCTL driver");
-MODULE_ALIAS("platform:sh_flctl");
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
deleted file mode 100644
index 78fc2d4218c808..00000000000000
--- a/include/linux/mtd/sh_flctl.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * SuperH FLCTL nand controller
- *
- * Copyright © 2008 Renesas Solutions Corp.
- */
-
-#ifndef __SH_FLCTL_H__
-#define __SH_FLCTL_H__
-
-#include <linux/completion.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pm_qos.h>
-
-/* FLCTL registers */
-#define FLCMNCR(f) (f->reg + 0x0)
-#define FLCMDCR(f) (f->reg + 0x4)
-#define FLCMCDR(f) (f->reg + 0x8)
-#define FLADR(f) (f->reg + 0xC)
-#define FLADR2(f) (f->reg + 0x3C)
-#define FLDATAR(f) (f->reg + 0x10)
-#define FLDTCNTR(f) (f->reg + 0x14)
-#define FLINTDMACR(f) (f->reg + 0x18)
-#define FLBSYTMR(f) (f->reg + 0x1C)
-#define FLBSYCNT(f) (f->reg + 0x20)
-#define FLDTFIFO(f) (f->reg + 0x24)
-#define FLECFIFO(f) (f->reg + 0x28)
-#define FLTRCR(f) (f->reg + 0x2C)
-#define FLHOLDCR(f) (f->reg + 0x38)
-#define FL4ECCRESULT0(f) (f->reg + 0x80)
-#define FL4ECCRESULT1(f) (f->reg + 0x84)
-#define FL4ECCRESULT2(f) (f->reg + 0x88)
-#define FL4ECCRESULT3(f) (f->reg + 0x8C)
-#define FL4ECCCR(f) (f->reg + 0x90)
-#define FL4ECCCNT(f) (f->reg + 0x94)
-#define FLERRADR(f) (f->reg + 0x98)
-
-/* FLCMNCR control bits */
-#define _4ECCCNTEN (0x1 << 24)
-#define _4ECCEN (0x1 << 23)
-#define _4ECCCORRECT (0x1 << 22)
-#define SHBUSSEL (0x1 << 20)
-#define SEL_16BIT (0x1 << 19)
-#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
-#define QTSEL_E (0x1 << 17)
-#define ENDIAN (0x1 << 16) /* 1 = little endian */
-#define FCKSEL_E (0x1 << 15)
-#define ACM_SACCES_MODE (0x01 << 10)
-#define NANWF_E (0x1 << 9)
-#define SE_D (0x1 << 8) /* Spare area disable */
-#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
-#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
-#define TYPESEL_SET (0x1 << 0)
-
-/*
- * Clock settings using the PULSEx registers from FLCMNCR
- *
- * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
- * to control the clock divider used between the High-Speed Peripheral Clock
- * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
- * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
- * signals.
- */
-#define PULSE3 (0x1 << 27)
-#define PULSE2 (0x1 << 17)
-#define PULSE1 (0x1 << 15)
-#define PULSE0 (0x1 << 9)
-#define CLK_8B_0_5 PULSE1
-#define CLK_8B_1 0x0
-#define CLK_8B_1_5 (PULSE1 | PULSE2)
-#define CLK_8B_2 PULSE0
-#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
-#define CLK_8B_4 (PULSE0 | PULSE2)
-#define CLK_16B_6L_2H PULSE0
-#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
-#define CLK_16B_12L_4H (PULSE0 | PULSE2)
-
-/* FLCMDCR control bits */
-#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
-#define ADRMD_E (0x1 << 26) /* Sector address access */
-#define CDSRC_E (0x1 << 25) /* Data buffer selection */
-#define DOSR_E (0x1 << 24) /* Status read check */
-#define SELRW (0x1 << 21) /* 0:read 1:write */
-#define DOADR_E (0x1 << 20) /* Address stage execute */
-#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
-#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
-#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
-#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
-#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
-#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
-
-/* FLINTDMACR control bits */
-#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */
-#define AC1CLR (0x1 << 19) /* ECC FIFO clear */
-#define AC0CLR (0x1 << 18) /* Data FIFO clear */
-#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */
-#define ECERB (0x1 << 9) /* ECC error */
-#define STERB (0x1 << 8) /* Status error */
-#define STERINTE (0x1 << 4) /* Status error enable */
-
-/* FLTRCR control bits */
-#define TRSTRT (0x1 << 0) /* translation start */
-#define TREND (0x1 << 1) /* translation end */
-
-/*
- * FLHOLDCR control bits
- *
- * HOLDEN: Bus Occupancy Enable (inverted)
- * Enable this bit when the external bus might be used in between transfers.
- * If not set and the bus gets used by other modules, a deadlock occurs.
- */
-#define HOLDEN (0x1 << 0)
-
-/* FL4ECCCR control bits */
-#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
-#define _4ECCEND (0x1 << 1) /* 4 symbols end */
-#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
-
-#define LOOP_TIMEOUT_MAX 0x00010000
-
-enum flctl_ecc_res_t {
- FL_SUCCESS,
- FL_REPAIRABLE,
- FL_ERROR,
- FL_TIMEOUT
-};
-
-struct dma_chan;
-
-struct sh_flctl {
- struct nand_chip chip;
- struct platform_device *pdev;
- struct dev_pm_qos_request pm_qos;
- void __iomem *reg;
- resource_size_t fifo;
-
- uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
- int read_bytes;
- unsigned int index;
- int seqin_column; /* column in SEQIN cmd */
- int seqin_page_addr; /* page_addr in SEQIN cmd */
- uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
- int erase1_page_addr; /* page_addr in ERASE1 cmd */
- uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
- uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
- uint32_t flcmncr_base; /* base value of FLCMNCR */
- uint32_t flintdmacr_base; /* irq enable bits */
-
- unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
- unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
- unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
- unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
-
- /* DMA related objects */
- struct dma_chan *chan_fifo0_rx;
- struct dma_chan *chan_fifo0_tx;
- struct completion dma_complete;
-};
-
-struct sh_flctl_platform_data {
- struct mtd_partition *parts;
- int nr_parts;
- unsigned long flcmncr_val;
-
- unsigned has_hwecc:1;
- unsigned use_holden:1;
-
- unsigned int slave_id_fifo0_tx;
- unsigned int slave_id_fifo0_rx;
-};
-
-static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
-{
- return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
-}
-
-#endif /* __SH_FLCTL_H__ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:30 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:30 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/mtd/nand/raw/Kconfig | 8 -
> drivers/mtd/nand/raw/Makefile | 1 -
> drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
> include/linux/mtd/sh_flctl.h | 180 -----
> 4 files changed, 1423 deletions(-)
> delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
> delete mode 100644 include/linux/mtd/sh_flctl.h
>
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 98ea1c9e65c8ef..20a4988ea418d5 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -284,14 +284,6 @@ config MTD_NAND_MXC
> This enables the driver for the NAND flash controller on the
> MXC processors.
>
> -config MTD_NAND_SH_FLCTL
> - tristate "Renesas SuperH FLCTL NAND controller"
> - depends on SUPERH || COMPILE_TEST
> - depends on HAS_IOMEM
> - help
> - Several Renesas SuperH CPU has FLCTL. This option enables support
> - for NAND Flash using FLCTL.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5 and R-Mobile A1 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 8:30 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:30 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/mtd/nand/raw/Kconfig | 8 -
> drivers/mtd/nand/raw/Makefile | 1 -
> drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
> include/linux/mtd/sh_flctl.h | 180 -----
> 4 files changed, 1423 deletions(-)
> delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
> delete mode 100644 include/linux/mtd/sh_flctl.h
>
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 98ea1c9e65c8ef..20a4988ea418d5 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -284,14 +284,6 @@ config MTD_NAND_MXC
> This enables the driver for the NAND flash controller on the
> MXC processors.
>
> -config MTD_NAND_SH_FLCTL
> - tristate "Renesas SuperH FLCTL NAND controller"
> - depends on SUPERH || COMPILE_TEST
> - depends on HAS_IOMEM
> - help
> - Several Renesas SuperH CPU has FLCTL. This option enables support
> - for NAND Flash using FLCTL.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5 and R-Mobile A1 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 8:30 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:30 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/mtd/nand/raw/Kconfig | 8 -
> drivers/mtd/nand/raw/Makefile | 1 -
> drivers/mtd/nand/raw/sh_flctl.c | 1234 -------------------------------
> include/linux/mtd/sh_flctl.h | 180 -----
> 4 files changed, 1423 deletions(-)
> delete mode 100644 drivers/mtd/nand/raw/sh_flctl.c
> delete mode 100644 include/linux/mtd/sh_flctl.h
>
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 98ea1c9e65c8ef..20a4988ea418d5 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -284,14 +284,6 @@ config MTD_NAND_MXC
> This enables the driver for the NAND flash controller on the
> MXC processors.
>
> -config MTD_NAND_SH_FLCTL
> - tristate "Renesas SuperH FLCTL NAND controller"
> - depends on SUPERH || COMPILE_TEST
> - depends on HAS_IOMEM
> - help
> - Several Renesas SuperH CPU has FLCTL. This option enables support
> - for NAND Flash using FLCTL.
FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5 and R-Mobile A1 SoCs.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
2023-01-13 8:30 ` Geert Uytterhoeven
(?)
@ 2023-01-13 10:06 ` Arnd Bergmann
-1 siblings, 0 replies; 263+ messages in thread
From: Arnd Bergmann @ 2023-01-13 10:06 UTC (permalink / raw)
To: Geert Uytterhoeven, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Greg Kroah-Hartman,
laurent.pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, Linux-Arch, dmaengine,
dri-devel, Linux-Renesas, linux-i2c, linux-input, linux-media,
linux-mmc @ vger . kernel . org, linux-mtd, Netdev,
open list:GPIO SUBSYSTEM, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023, at 09:30, Geert Uytterhoeven wrote:
> On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
>> Now that arch/sh is removed this driver is dead code.
>
> FTR, this hardware block is also present on the ARM-based
> SH-Mobile AG5 and R-Mobile A1 SoCs.
> Again, no DT support.
I would generally consider drivers dead when they have no DT support
and no platform in the upstream kernel registering the corresponding
device.
If anyone still uses this driver on SH-Mobile or R-Mobile, they
have clearly given up on upstreaming their patches by now, and
they can carry the burden of maintaining the driver out of tree,
or re-submit a working version.
Arnd
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 10:06 ` Arnd Bergmann
0 siblings, 0 replies; 263+ messages in thread
From: Arnd Bergmann @ 2023-01-13 10:06 UTC (permalink / raw)
To: Geert Uytterhoeven, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Linux-Arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, alsa-devel, open list:GPIO SUBSYSTEM,
Greg Kroah-Hartman, linux-usb, linux-mmc @ vger . kernel . org,
linux-kernel, linux-spi, Linux-Renesas, Kieran Bingham, Netdev,
dmaengine, laurent.pinchart
On Fri, Jan 13, 2023, at 09:30, Geert Uytterhoeven wrote:
> On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
>> Now that arch/sh is removed this driver is dead code.
>
> FTR, this hardware block is also present on the ARM-based
> SH-Mobile AG5 and R-Mobile A1 SoCs.
> Again, no DT support.
I would generally consider drivers dead when they have no DT support
and no platform in the upstream kernel registering the corresponding
device.
If anyone still uses this driver on SH-Mobile or R-Mobile, they
have clearly given up on upstreaming their patches by now, and
they can carry the burden of maintaining the driver out of tree,
or re-submit a working version.
Arnd
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 11/22] mtd/nand: remove sh_flctl
@ 2023-01-13 10:06 ` Arnd Bergmann
0 siblings, 0 replies; 263+ messages in thread
From: Arnd Bergmann @ 2023-01-13 10:06 UTC (permalink / raw)
To: Geert Uytterhoeven, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Greg Kroah-Hartman,
laurent.pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, Linux-Arch, dmaengine,
dri-devel, Linux-Renesas, linux-i2c, linux-input, linux-media,
linux-mmc @ vger . kernel . org, linux-mtd, Netdev,
open list:GPIO SUBSYSTEM, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023, at 09:30, Geert Uytterhoeven wrote:
> On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
>> Now that arch/sh is removed this driver is dead code.
>
> FTR, this hardware block is also present on the ARM-based
> SH-Mobile AG5 and R-Mobile A1 SoCs.
> Again, no DT support.
I would generally consider drivers dead when they have no DT support
and no platform in the upstream kernel registering the corresponding
device.
If anyone still uses this driver on SH-Mobile or R-Mobile, they
have clearly given up on upstreaming their patches by now, and
they can carry the burden of maintaining the driver out of tree,
or re-submit a working version.
Arnd
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 12/22] net/ethernet/8390: remove stnic
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/net/ethernet/8390/Kconfig | 12 --
drivers/net/ethernet/8390/Makefile | 1 -
drivers/net/ethernet/8390/stnic.c | 302 -----------------------------
3 files changed, 315 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/stnic.c
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index eb90de04c88419..a7976743be9ee3 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -155,18 +155,6 @@ config PCMCIA_PCNET
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config ULTRA
tristate "SMC Ultra support"
depends on ISA
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index 85c83c566ec663..3819a3bb75a1c9 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_XSURF100) += xsurf100.o
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
deleted file mode 100644
index bd89ca8a92dfbc..00000000000000
--- a/drivers/net/ethernet/8390/stnic.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* stnic.c : A SH7750 specific part of driver for NS DP83902A ST-NIC.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 kaz Kojima
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-#include <asm/machvec.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
-#include <asm/sh_bios.h>
-#endif
-
-#include "8390.h"
-
-#define DRV_NAME "stnic"
-
-#define byte unsigned char
-#define half unsigned short
-#define word unsigned int
-#define vbyte volatile unsigned char
-#define vhalf volatile unsigned short
-#define vword volatile unsigned int
-
-#define STNIC_RUN 0x01 /* 1 == Run, 0 == reset. */
-
-#define START_PG 0 /* First page of TX buffer */
-#define STOP_PG 128 /* Last page +1 of RX ring */
-
-/* Alias */
-#define STNIC_CR E8390_CMD
-#define PG0_RSAR0 EN0_RSARLO
-#define PG0_RSAR1 EN0_RSARHI
-#define PG0_RBCR0 EN0_RCNTLO
-#define PG0_RBCR1 EN0_RCNTHI
-
-#define CR_RRD E8390_RREAD
-#define CR_RWR E8390_RWRITE
-#define CR_PG0 E8390_PAGE0
-#define CR_STA E8390_START
-#define CR_RDMA E8390_NODMA
-
-/* FIXME! YOU MUST SET YOUR OWN ETHER ADDRESS. */
-static byte stnic_eadr[6] =
-{0x00, 0xc0, 0x6e, 0x00, 0x00, 0x07};
-
-static struct net_device *stnic_dev;
-
-static void stnic_reset (struct net_device *dev);
-static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void stnic_block_input (struct net_device *dev, int count,
- struct sk_buff *skb , int ring_offset);
-static void stnic_block_output (struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-
-static void stnic_init (struct net_device *dev);
-
-static u32 stnic_msg_enable;
-
-module_param_named(msg_enable, stnic_msg_enable, uint, 0444);
-MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
-
-/* SH7750 specific read/write io. */
-static inline void
-STNIC_DELAY (void)
-{
- vword trash;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
-}
-
-static inline byte
-STNIC_READ (int reg)
-{
- byte val;
-
- val = (*(vhalf *) (PA_83902 + ((reg) << 1)) >> 8) & 0xff;
- STNIC_DELAY ();
- return val;
-}
-
-static inline void
-STNIC_WRITE (int reg, byte val)
-{
- *(vhalf *) (PA_83902 + ((reg) << 1)) = ((half) (val) << 8);
- STNIC_DELAY ();
-}
-
-static int __init stnic_probe(void)
-{
- struct net_device *dev;
- struct ei_device *ei_local;
- int err;
-
- /* If we are not running on a SolutionEngine, give up now */
- if (! MACH_SE)
- return -ENODEV;
-
- /* New style probing API */
- dev = alloc_ei_netdev();
- if (!dev)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- sh_bios_get_node_addr (stnic_eadr);
-#endif
- eth_hw_addr_set(dev, stnic_eadr);
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = 0x1000;
- dev->irq = IRQ_STNIC;
- dev->netdev_ops = &ei_netdev_ops;
-
- /* Snarf the interrupt now. There's no point in waiting since we cannot
- share and the board will usually be enabled. */
- err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev);
- if (err) {
- netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq);
- free_netdev(dev);
- return err;
- }
-
- ei_status.name = dev->name;
- ei_status.word16 = 1;
-#ifdef __LITTLE_ENDIAN__
- ei_status.bigendian = 0;
-#else
- ei_status.bigendian = 1;
-#endif
- ei_status.tx_start_page = START_PG;
- ei_status.rx_start_page = START_PG + TX_PAGES;
- ei_status.stop_page = STOP_PG;
-
- ei_status.reset_8390 = &stnic_reset;
- ei_status.get_8390_hdr = &stnic_get_hdr;
- ei_status.block_input = &stnic_block_input;
- ei_status.block_output = &stnic_block_output;
-
- stnic_init (dev);
- ei_local = netdev_priv(dev);
- ei_local->msg_enable = stnic_msg_enable;
-
- err = register_netdev(dev);
- if (err) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- return err;
- }
- stnic_dev = dev;
-
- netdev_info(dev, "NS ST-NIC 83902A\n");
-
- return 0;
-}
-
-static void
-stnic_reset (struct net_device *dev)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- *(vhalf *) PA_83902_RST = 0;
- udelay (5);
- netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies);
- *(vhalf *) PA_83902_RST = ~0;
- udelay (5);
-}
-
-static void
-stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- half buf[2];
-
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, ring_page);
- STNIC_WRITE (PG0_RBCR0, 4);
- STNIC_WRITE (PG0_RBCR1, 0);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- buf[0] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- buf[1] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- hdr->next = buf[0] >> 8;
- hdr->status = buf[0] & 0xff;
-#ifdef __LITTLE_ENDIAN__
- hdr->count = buf[1];
-#else
- hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8);
-#endif
-
- netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n",
- ring_page, hdr->status, hdr->next, hdr->count);
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you are
- porting to a new ethercard look at the packet driver source for hints.
- The HP LAN doesn't use shared memory -- we put the packet
- out through the "remote DMA" dataport. */
-
-static void
-stnic_block_input (struct net_device *dev, int length, struct sk_buff *skb,
- int offset)
-{
- char *buf = skb->data;
- half val;
-
- STNIC_WRITE (PG0_RSAR0, offset & 0xff);
- STNIC_WRITE (PG0_RSAR1, offset >> 8);
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
- val = *(vhalf *) PA_83902_IF;
-#ifdef __LITTLE_ENDIAN__
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
-#else
- *buf++ = val >> 8;
- *buf++ = val & 0xff;
-#endif
- STNIC_DELAY ();
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-static void
-stnic_block_output (struct net_device *dev, int length,
- const unsigned char *buf, int output_page)
-{
- STNIC_WRITE (PG0_RBCR0, 1); /* Write non-zero value */
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
- STNIC_DELAY ();
-
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, output_page);
- STNIC_WRITE (STNIC_CR, CR_RWR | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
-#ifdef __LITTLE_ENDIAN__
- *(vhalf *) PA_83902_IF = ((half) buf[1] << 8) | buf[0];
-#else
- *(vhalf *) PA_83902_IF = ((half) buf[0] << 8) | buf[1];
-#endif
- STNIC_DELAY ();
- buf += sizeof (half);
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* This function resets the STNIC if something screws up. */
-static void
-stnic_init (struct net_device *dev)
-{
- stnic_reset (dev);
- NS8390_init (dev, 0);
-}
-
-static void __exit stnic_cleanup(void)
-{
- unregister_netdev(stnic_dev);
- free_irq(stnic_dev->irq, stnic_dev);
- free_netdev(stnic_dev);
-}
-
-module_init(stnic_probe);
-module_exit(stnic_cleanup);
-MODULE_LICENSE("GPL");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 12/22] net/ethernet/8390: remove stnic
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/net/ethernet/8390/Kconfig | 12 --
drivers/net/ethernet/8390/Makefile | 1 -
drivers/net/ethernet/8390/stnic.c | 302 -----------------------------
3 files changed, 315 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/stnic.c
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index eb90de04c88419..a7976743be9ee3 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -155,18 +155,6 @@ config PCMCIA_PCNET
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config ULTRA
tristate "SMC Ultra support"
depends on ISA
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index 85c83c566ec663..3819a3bb75a1c9 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_XSURF100) += xsurf100.o
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
deleted file mode 100644
index bd89ca8a92dfbc..00000000000000
--- a/drivers/net/ethernet/8390/stnic.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* stnic.c : A SH7750 specific part of driver for NS DP83902A ST-NIC.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 kaz Kojima
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-#include <asm/machvec.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
-#include <asm/sh_bios.h>
-#endif
-
-#include "8390.h"
-
-#define DRV_NAME "stnic"
-
-#define byte unsigned char
-#define half unsigned short
-#define word unsigned int
-#define vbyte volatile unsigned char
-#define vhalf volatile unsigned short
-#define vword volatile unsigned int
-
-#define STNIC_RUN 0x01 /* 1 == Run, 0 == reset. */
-
-#define START_PG 0 /* First page of TX buffer */
-#define STOP_PG 128 /* Last page +1 of RX ring */
-
-/* Alias */
-#define STNIC_CR E8390_CMD
-#define PG0_RSAR0 EN0_RSARLO
-#define PG0_RSAR1 EN0_RSARHI
-#define PG0_RBCR0 EN0_RCNTLO
-#define PG0_RBCR1 EN0_RCNTHI
-
-#define CR_RRD E8390_RREAD
-#define CR_RWR E8390_RWRITE
-#define CR_PG0 E8390_PAGE0
-#define CR_STA E8390_START
-#define CR_RDMA E8390_NODMA
-
-/* FIXME! YOU MUST SET YOUR OWN ETHER ADDRESS. */
-static byte stnic_eadr[6] =
-{0x00, 0xc0, 0x6e, 0x00, 0x00, 0x07};
-
-static struct net_device *stnic_dev;
-
-static void stnic_reset (struct net_device *dev);
-static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void stnic_block_input (struct net_device *dev, int count,
- struct sk_buff *skb , int ring_offset);
-static void stnic_block_output (struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-
-static void stnic_init (struct net_device *dev);
-
-static u32 stnic_msg_enable;
-
-module_param_named(msg_enable, stnic_msg_enable, uint, 0444);
-MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
-
-/* SH7750 specific read/write io. */
-static inline void
-STNIC_DELAY (void)
-{
- vword trash;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
-}
-
-static inline byte
-STNIC_READ (int reg)
-{
- byte val;
-
- val = (*(vhalf *) (PA_83902 + ((reg) << 1)) >> 8) & 0xff;
- STNIC_DELAY ();
- return val;
-}
-
-static inline void
-STNIC_WRITE (int reg, byte val)
-{
- *(vhalf *) (PA_83902 + ((reg) << 1)) = ((half) (val) << 8);
- STNIC_DELAY ();
-}
-
-static int __init stnic_probe(void)
-{
- struct net_device *dev;
- struct ei_device *ei_local;
- int err;
-
- /* If we are not running on a SolutionEngine, give up now */
- if (! MACH_SE)
- return -ENODEV;
-
- /* New style probing API */
- dev = alloc_ei_netdev();
- if (!dev)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- sh_bios_get_node_addr (stnic_eadr);
-#endif
- eth_hw_addr_set(dev, stnic_eadr);
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = 0x1000;
- dev->irq = IRQ_STNIC;
- dev->netdev_ops = &ei_netdev_ops;
-
- /* Snarf the interrupt now. There's no point in waiting since we cannot
- share and the board will usually be enabled. */
- err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev);
- if (err) {
- netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq);
- free_netdev(dev);
- return err;
- }
-
- ei_status.name = dev->name;
- ei_status.word16 = 1;
-#ifdef __LITTLE_ENDIAN__
- ei_status.bigendian = 0;
-#else
- ei_status.bigendian = 1;
-#endif
- ei_status.tx_start_page = START_PG;
- ei_status.rx_start_page = START_PG + TX_PAGES;
- ei_status.stop_page = STOP_PG;
-
- ei_status.reset_8390 = &stnic_reset;
- ei_status.get_8390_hdr = &stnic_get_hdr;
- ei_status.block_input = &stnic_block_input;
- ei_status.block_output = &stnic_block_output;
-
- stnic_init (dev);
- ei_local = netdev_priv(dev);
- ei_local->msg_enable = stnic_msg_enable;
-
- err = register_netdev(dev);
- if (err) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- return err;
- }
- stnic_dev = dev;
-
- netdev_info(dev, "NS ST-NIC 83902A\n");
-
- return 0;
-}
-
-static void
-stnic_reset (struct net_device *dev)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- *(vhalf *) PA_83902_RST = 0;
- udelay (5);
- netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies);
- *(vhalf *) PA_83902_RST = ~0;
- udelay (5);
-}
-
-static void
-stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- half buf[2];
-
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, ring_page);
- STNIC_WRITE (PG0_RBCR0, 4);
- STNIC_WRITE (PG0_RBCR1, 0);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- buf[0] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- buf[1] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- hdr->next = buf[0] >> 8;
- hdr->status = buf[0] & 0xff;
-#ifdef __LITTLE_ENDIAN__
- hdr->count = buf[1];
-#else
- hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8);
-#endif
-
- netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n",
- ring_page, hdr->status, hdr->next, hdr->count);
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you are
- porting to a new ethercard look at the packet driver source for hints.
- The HP LAN doesn't use shared memory -- we put the packet
- out through the "remote DMA" dataport. */
-
-static void
-stnic_block_input (struct net_device *dev, int length, struct sk_buff *skb,
- int offset)
-{
- char *buf = skb->data;
- half val;
-
- STNIC_WRITE (PG0_RSAR0, offset & 0xff);
- STNIC_WRITE (PG0_RSAR1, offset >> 8);
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
- val = *(vhalf *) PA_83902_IF;
-#ifdef __LITTLE_ENDIAN__
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
-#else
- *buf++ = val >> 8;
- *buf++ = val & 0xff;
-#endif
- STNIC_DELAY ();
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-static void
-stnic_block_output (struct net_device *dev, int length,
- const unsigned char *buf, int output_page)
-{
- STNIC_WRITE (PG0_RBCR0, 1); /* Write non-zero value */
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
- STNIC_DELAY ();
-
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, output_page);
- STNIC_WRITE (STNIC_CR, CR_RWR | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
-#ifdef __LITTLE_ENDIAN__
- *(vhalf *) PA_83902_IF = ((half) buf[1] << 8) | buf[0];
-#else
- *(vhalf *) PA_83902_IF = ((half) buf[0] << 8) | buf[1];
-#endif
- STNIC_DELAY ();
- buf += sizeof (half);
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* This function resets the STNIC if something screws up. */
-static void
-stnic_init (struct net_device *dev)
-{
- stnic_reset (dev);
- NS8390_init (dev, 0);
-}
-
-static void __exit stnic_cleanup(void)
-{
- unregister_netdev(stnic_dev);
- free_irq(stnic_dev->irq, stnic_dev);
- free_netdev(stnic_dev);
-}
-
-module_init(stnic_probe);
-module_exit(stnic_cleanup);
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 12/22] net/ethernet/8390: remove stnic
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/net/ethernet/8390/Kconfig | 12 --
drivers/net/ethernet/8390/Makefile | 1 -
drivers/net/ethernet/8390/stnic.c | 302 -----------------------------
3 files changed, 315 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/stnic.c
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index eb90de04c88419..a7976743be9ee3 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -155,18 +155,6 @@ config PCMCIA_PCNET
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config ULTRA
tristate "SMC Ultra support"
depends on ISA
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index 85c83c566ec663..3819a3bb75a1c9 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_XSURF100) += xsurf100.o
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
deleted file mode 100644
index bd89ca8a92dfbc..00000000000000
--- a/drivers/net/ethernet/8390/stnic.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* stnic.c : A SH7750 specific part of driver for NS DP83902A ST-NIC.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 kaz Kojima
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-#include <asm/machvec.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
-#include <asm/sh_bios.h>
-#endif
-
-#include "8390.h"
-
-#define DRV_NAME "stnic"
-
-#define byte unsigned char
-#define half unsigned short
-#define word unsigned int
-#define vbyte volatile unsigned char
-#define vhalf volatile unsigned short
-#define vword volatile unsigned int
-
-#define STNIC_RUN 0x01 /* 1 == Run, 0 == reset. */
-
-#define START_PG 0 /* First page of TX buffer */
-#define STOP_PG 128 /* Last page +1 of RX ring */
-
-/* Alias */
-#define STNIC_CR E8390_CMD
-#define PG0_RSAR0 EN0_RSARLO
-#define PG0_RSAR1 EN0_RSARHI
-#define PG0_RBCR0 EN0_RCNTLO
-#define PG0_RBCR1 EN0_RCNTHI
-
-#define CR_RRD E8390_RREAD
-#define CR_RWR E8390_RWRITE
-#define CR_PG0 E8390_PAGE0
-#define CR_STA E8390_START
-#define CR_RDMA E8390_NODMA
-
-/* FIXME! YOU MUST SET YOUR OWN ETHER ADDRESS. */
-static byte stnic_eadr[6] =
-{0x00, 0xc0, 0x6e, 0x00, 0x00, 0x07};
-
-static struct net_device *stnic_dev;
-
-static void stnic_reset (struct net_device *dev);
-static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void stnic_block_input (struct net_device *dev, int count,
- struct sk_buff *skb , int ring_offset);
-static void stnic_block_output (struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-
-static void stnic_init (struct net_device *dev);
-
-static u32 stnic_msg_enable;
-
-module_param_named(msg_enable, stnic_msg_enable, uint, 0444);
-MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
-
-/* SH7750 specific read/write io. */
-static inline void
-STNIC_DELAY (void)
-{
- vword trash;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
- trash = *(vword *) 0xa0000000;
-}
-
-static inline byte
-STNIC_READ (int reg)
-{
- byte val;
-
- val = (*(vhalf *) (PA_83902 + ((reg) << 1)) >> 8) & 0xff;
- STNIC_DELAY ();
- return val;
-}
-
-static inline void
-STNIC_WRITE (int reg, byte val)
-{
- *(vhalf *) (PA_83902 + ((reg) << 1)) = ((half) (val) << 8);
- STNIC_DELAY ();
-}
-
-static int __init stnic_probe(void)
-{
- struct net_device *dev;
- struct ei_device *ei_local;
- int err;
-
- /* If we are not running on a SolutionEngine, give up now */
- if (! MACH_SE)
- return -ENODEV;
-
- /* New style probing API */
- dev = alloc_ei_netdev();
- if (!dev)
- return -ENOMEM;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- sh_bios_get_node_addr (stnic_eadr);
-#endif
- eth_hw_addr_set(dev, stnic_eadr);
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = 0x1000;
- dev->irq = IRQ_STNIC;
- dev->netdev_ops = &ei_netdev_ops;
-
- /* Snarf the interrupt now. There's no point in waiting since we cannot
- share and the board will usually be enabled. */
- err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev);
- if (err) {
- netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq);
- free_netdev(dev);
- return err;
- }
-
- ei_status.name = dev->name;
- ei_status.word16 = 1;
-#ifdef __LITTLE_ENDIAN__
- ei_status.bigendian = 0;
-#else
- ei_status.bigendian = 1;
-#endif
- ei_status.tx_start_page = START_PG;
- ei_status.rx_start_page = START_PG + TX_PAGES;
- ei_status.stop_page = STOP_PG;
-
- ei_status.reset_8390 = &stnic_reset;
- ei_status.get_8390_hdr = &stnic_get_hdr;
- ei_status.block_input = &stnic_block_input;
- ei_status.block_output = &stnic_block_output;
-
- stnic_init (dev);
- ei_local = netdev_priv(dev);
- ei_local->msg_enable = stnic_msg_enable;
-
- err = register_netdev(dev);
- if (err) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- return err;
- }
- stnic_dev = dev;
-
- netdev_info(dev, "NS ST-NIC 83902A\n");
-
- return 0;
-}
-
-static void
-stnic_reset (struct net_device *dev)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- *(vhalf *) PA_83902_RST = 0;
- udelay (5);
- netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies);
- *(vhalf *) PA_83902_RST = ~0;
- udelay (5);
-}
-
-static void
-stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-
- half buf[2];
-
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, ring_page);
- STNIC_WRITE (PG0_RBCR0, 4);
- STNIC_WRITE (PG0_RBCR1, 0);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- buf[0] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- buf[1] = *(vhalf *) PA_83902_IF;
- STNIC_DELAY ();
- hdr->next = buf[0] >> 8;
- hdr->status = buf[0] & 0xff;
-#ifdef __LITTLE_ENDIAN__
- hdr->count = buf[1];
-#else
- hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8);
-#endif
-
- netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n",
- ring_page, hdr->status, hdr->next, hdr->count);
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you are
- porting to a new ethercard look at the packet driver source for hints.
- The HP LAN doesn't use shared memory -- we put the packet
- out through the "remote DMA" dataport. */
-
-static void
-stnic_block_input (struct net_device *dev, int length, struct sk_buff *skb,
- int offset)
-{
- char *buf = skb->data;
- half val;
-
- STNIC_WRITE (PG0_RSAR0, offset & 0xff);
- STNIC_WRITE (PG0_RSAR1, offset >> 8);
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
- val = *(vhalf *) PA_83902_IF;
-#ifdef __LITTLE_ENDIAN__
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
-#else
- *buf++ = val >> 8;
- *buf++ = val & 0xff;
-#endif
- STNIC_DELAY ();
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-static void
-stnic_block_output (struct net_device *dev, int length,
- const unsigned char *buf, int output_page)
-{
- STNIC_WRITE (PG0_RBCR0, 1); /* Write non-zero value */
- STNIC_WRITE (STNIC_CR, CR_RRD | CR_PG0 | CR_STA);
- STNIC_DELAY ();
-
- STNIC_WRITE (PG0_RBCR0, length & 0xff);
- STNIC_WRITE (PG0_RBCR1, length >> 8);
- STNIC_WRITE (PG0_RSAR0, 0);
- STNIC_WRITE (PG0_RSAR1, output_page);
- STNIC_WRITE (STNIC_CR, CR_RWR | CR_PG0 | CR_STA);
-
- if (length & 1)
- length++;
-
- while (length > 0)
- {
-#ifdef __LITTLE_ENDIAN__
- *(vhalf *) PA_83902_IF = ((half) buf[1] << 8) | buf[0];
-#else
- *(vhalf *) PA_83902_IF = ((half) buf[0] << 8) | buf[1];
-#endif
- STNIC_DELAY ();
- buf += sizeof (half);
- length -= sizeof (half);
- }
-
- STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA);
-}
-
-/* This function resets the STNIC if something screws up. */
-static void
-stnic_init (struct net_device *dev)
-{
- stnic_reset (dev);
- NS8390_init (dev, 0);
-}
-
-static void __exit stnic_cleanup(void)
-{
- unregister_netdev(stnic_dev);
- free_irq(stnic_dev->irq, stnic_dev);
- free_netdev(stnic_dev);
-}
-
-module_init(stnic_probe);
-module_exit(stnic_cleanup);
-MODULE_LICENSE("GPL");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 13/22] pinctrl: remove renesas sh controllers
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/pinctrl/renesas/Kconfig | 63 +-
drivers/pinctrl/renesas/Makefile | 27 -
drivers/pinctrl/renesas/core.c | 598 ------
drivers/pinctrl/renesas/pfc-sh7203.c | 1577 --------------
drivers/pinctrl/renesas/pfc-sh7264.c | 2131 -------------------
drivers/pinctrl/renesas/pfc-sh7269.c | 2851 --------------------------
drivers/pinctrl/renesas/pfc-sh7720.c | 1201 -----------
drivers/pinctrl/renesas/pfc-sh7722.c | 1703 ---------------
drivers/pinctrl/renesas/pfc-sh7723.c | 1902 -----------------
drivers/pinctrl/renesas/pfc-sh7724.c | 2177 --------------------
drivers/pinctrl/renesas/pfc-sh7734.c | 2408 ----------------------
drivers/pinctrl/renesas/pfc-sh7757.c | 2219 --------------------
drivers/pinctrl/renesas/pfc-sh7785.c | 1258 ------------
drivers/pinctrl/renesas/pfc-sh7786.c | 809 --------
drivers/pinctrl/renesas/pfc-shx3.c | 557 -----
15 files changed, 2 insertions(+), 21479 deletions(-)
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7203.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7264.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7269.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7720.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7722.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7723.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7724.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7734.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7757.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7785.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7786.c
delete mode 100644 drivers/pinctrl/renesas/pfc-shx3.c
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 0903a0a4183198..fe4475c51920cd 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -6,8 +6,8 @@
menu "Renesas pinctrl drivers"
config PINCTRL_RENESAS
- bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
- default y if ARCH_RENESAS || SUPERH
+ bool "Renesas SoC pin control support" if COMPILE_TEST && ARCH_RENESAS
+ default y if ARCH_RENESAS
select PINCTRL_PFC_EMEV2 if ARCH_EMEV2
select PINCTRL_PFC_R8A73A4 if ARCH_R8A73A4
select PINCTRL_PFC_R8A7740 if ARCH_R8A7740
@@ -41,19 +41,7 @@ config PINCTRL_RENESAS
select PINCTRL_PFC_R8A779G0 if ARCH_R8A779G0
select PINCTRL_RZG2L if ARCH_RZG2L
select PINCTRL_RZV2M if ARCH_R9A09G011
- select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203
- select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264
- select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
select PINCTRL_PFC_SH73A0 if ARCH_SH73A0
- select PINCTRL_PFC_SH7720 if CPU_SUBTYPE_SH7720
- select PINCTRL_PFC_SH7722 if CPU_SUBTYPE_SH7722
- select PINCTRL_PFC_SH7723 if CPU_SUBTYPE_SH7723
- select PINCTRL_PFC_SH7724 if CPU_SUBTYPE_SH7724
- select PINCTRL_PFC_SH7734 if CPU_SUBTYPE_SH7734
- select PINCTRL_PFC_SH7757 if CPU_SUBTYPE_SH7757
- select PINCTRL_PFC_SH7785 if CPU_SUBTYPE_SH7785
- select PINCTRL_PFC_SH7786 if CPU_SUBTYPE_SH7786
- select PINCTRL_PFC_SHX3 if CPU_SUBTYPE_SHX3
help
This enables pin control drivers for Renesas SuperH and ARM platforms
@@ -255,57 +243,10 @@ config PINCTRL_RZV2M
This selects GPIO and pinctrl driver for Renesas RZ/V2M
platforms.
-config PINCTRL_PFC_SH7203
- bool "pin control support for SH7203" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7264
- bool "pin control support for SH7264" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7269
- bool "pin control support for SH7269" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7720
- bool "pin control support for SH7720" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7722
- bool "pin control support for SH7722" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7734
- bool "pin control support for SH7734" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7757
- bool "pin control support for SH7757" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7785
- bool "pin control support for SH7785" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7786
- bool "pin control support for SH7786" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH73A0
bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
select REGULATOR
-config PINCTRL_PFC_SH7723
- bool "pin control support for SH-Mobile R2" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7724
- bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SHX3
- bool "pin control support for SH-X3" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
endmenu
diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile
index 558b30ce0dec98..115f6565948c7d 100644
--- a/drivers/pinctrl/renesas/Makefile
+++ b/drivers/pinctrl/renesas/Makefile
@@ -32,37 +32,10 @@ obj-$(CONFIG_PINCTRL_PFC_R8A77995) += pfc-r8a77995.o
obj-$(CONFIG_PINCTRL_PFC_R8A779A0) += pfc-r8a779a0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779F0) += pfc-r8a779f0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779G0) += pfc-r8a779g0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o
-obj-$(CONFIG_PINCTRL_PFC_SH7264) += pfc-sh7264.o
-obj-$(CONFIG_PINCTRL_PFC_SH7269) += pfc-sh7269.o
obj-$(CONFIG_PINCTRL_PFC_SH73A0) += pfc-sh73a0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7720) += pfc-sh7720.o
-obj-$(CONFIG_PINCTRL_PFC_SH7722) += pfc-sh7722.o
-obj-$(CONFIG_PINCTRL_PFC_SH7723) += pfc-sh7723.o
-obj-$(CONFIG_PINCTRL_PFC_SH7724) += pfc-sh7724.o
-obj-$(CONFIG_PINCTRL_PFC_SH7734) += pfc-sh7734.o
-obj-$(CONFIG_PINCTRL_PFC_SH7757) += pfc-sh7757.o
-obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o
-obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o
-obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o
obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
obj-$(CONFIG_PINCTRL_RZG2L) += pinctrl-rzg2l.o
obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
obj-$(CONFIG_PINCTRL_RZV2M) += pinctrl-rzv2m.o
-
-ifeq ($(CONFIG_COMPILE_TEST),y)
-CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7269.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7720.o += -I$(srctree)/arch/sh/include/cpu-sh3
-CFLAGS_pfc-sh7722.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7723.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7724.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7734.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7757.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7785.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7786.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-shx3.o += -I$(srctree)/arch/sh/include/cpu-sh4
-endif
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index c91102d3f1d155..47f2cc786cbb76 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
-#ifdef DEBUG
-#define SH_PFC_MAX_REGS 300
-#define SH_PFC_MAX_ENUMS 5000
-
-static unsigned int sh_pfc_errors __initdata;
-static unsigned int sh_pfc_warnings __initdata;
-static bool sh_pfc_bias_done __initdata;
-static bool sh_pfc_drive_done __initdata;
-static bool sh_pfc_power_done __initdata;
-static struct {
- u32 reg;
- u32 bits;
-} *sh_pfc_regs __initdata;
-static u32 sh_pfc_num_regs __initdata;
-static u16 *sh_pfc_enums __initdata;
-static u32 sh_pfc_num_enums __initdata;
-
-#define sh_pfc_err(fmt, ...) \
- do { \
- pr_err("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_errors++; \
- } while (0)
-
-#define sh_pfc_err_once(type, fmt, ...) \
- do { \
- if (!sh_pfc_ ## type ## _done) { \
- sh_pfc_ ## type ## _done = true; \
- sh_pfc_err(fmt, ##__VA_ARGS__); \
- } \
- } while (0)
-
-#define sh_pfc_warn(fmt, ...) \
- do { \
- pr_warn("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_warnings++; \
- } while (0)
-
-static bool __init is0s(const u16 *enum_ids, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++)
- if (enum_ids[i])
- return false;
-
- return true;
-}
-
-static bool __init same_name(const char *a, const char *b)
-{
- return a && b && !strcmp(a, b);
-}
-
-static void __init sh_pfc_check_reg(const char *drvname, u32 reg, u32 bits)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_regs; i++) {
- if (reg != sh_pfc_regs[i].reg)
- continue;
-
- if (bits & sh_pfc_regs[i].bits)
- sh_pfc_err("reg 0x%x: bits 0x%x conflict\n", reg,
- bits & sh_pfc_regs[i].bits);
-
- sh_pfc_regs[i].bits |= bits;
- return;
- }
-
- if (sh_pfc_num_regs == SH_PFC_MAX_REGS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_REGS\n", drvname);
- return;
- }
-
- sh_pfc_regs[sh_pfc_num_regs].reg = reg;
- sh_pfc_regs[sh_pfc_num_regs].bits = bits;
- sh_pfc_num_regs++;
-}
-
-static int __init sh_pfc_check_enum(const char *drvname, u16 enum_id)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_enums; i++) {
- if (enum_id == sh_pfc_enums[i])
- return -EINVAL;
- }
-
- if (sh_pfc_num_enums == SH_PFC_MAX_ENUMS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_ENUMS\n", drvname);
- return 0;
- }
-
- sh_pfc_enums[sh_pfc_num_enums++] = enum_id;
- return 0;
-}
-
-static void __init sh_pfc_check_reg_enums(const char *drvname, u32 reg,
- const u16 *enums, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++) {
- if (enums[i] && sh_pfc_check_enum(drvname, enums[i]))
- sh_pfc_err("reg 0x%x enum_id %u conflict\n", reg,
- enums[i]);
- }
-}
-
-static const struct sh_pfc_pin __init *sh_pfc_find_pin(
- const struct sh_pfc_soc_info *info, u32 reg, unsigned int pin)
-{
- const char *drvname = info->name;
- unsigned int i;
-
- if (pin == SH_PFC_PIN_NONE)
- return NULL;
-
- for (i = 0; i < info->nr_pins; i++) {
- if (pin == info->pins[i].pin)
- return &info->pins[i];
- }
-
- sh_pfc_err("reg 0x%x: pin %u not found\n", reg, pin);
- return NULL;
-}
-
-static void __init sh_pfc_check_cfg_reg(const char *drvname,
- const struct pinmux_cfg_reg *cfg_reg)
-{
- unsigned int i, n, rw, r;
- int fw;
-
- sh_pfc_check_reg(drvname, cfg_reg->reg,
- GENMASK(cfg_reg->reg_width - 1, 0));
-
- if (cfg_reg->field_width) {
- fw = cfg_reg->field_width;
- n = (cfg_reg->reg_width / fw) << fw;
- for (i = 0, r = 0; i < n; i += 1 << fw) {
- if (is0s(&cfg_reg->enum_ids[i], 1 << fw))
- r++;
- }
-
- if ((r << fw) * sizeof(u16) > cfg_reg->reg_width / fw)
- sh_pfc_warn("reg 0x%x can be described with variable-width reserved fields\n",
- cfg_reg->reg);
-
- /* Skip field checks (done at build time) */
- goto check_enum_ids;
- }
-
- for (i = 0, n = 0, rw = 0; (fw = cfg_reg->var_field_width[i]); i++) {
- if (fw < 0) {
- rw += -fw;
- } else {
- if (is0s(&cfg_reg->enum_ids[n], 1 << fw))
- sh_pfc_warn("reg 0x%x: field [%u:%u] can be described as reserved\n",
- cfg_reg->reg, rw, rw + fw - 1);
- n += 1 << fw;
- rw += fw;
- }
- }
-
- if (rw != cfg_reg->reg_width)
- sh_pfc_err("reg 0x%x: var_field_width declares %u instead of %u bits\n",
- cfg_reg->reg, rw, cfg_reg->reg_width);
-
- if (n != cfg_reg->nr_enum_ids)
- sh_pfc_err("reg 0x%x: enum_ids[] has %u instead of %u values\n",
- cfg_reg->reg, cfg_reg->nr_enum_ids, n);
-
-check_enum_ids:
- sh_pfc_check_reg_enums(drvname, cfg_reg->reg, cfg_reg->enum_ids, n);
-}
-
-static void __init sh_pfc_check_drive_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_drive_reg *drive)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(drive->fields); i++) {
- const struct pinmux_drive_reg_field *field = &drive->fields[i];
-
- if (!field->pin && !field->offset && !field->size)
- continue;
-
- sh_pfc_check_reg(info->name, drive->reg,
- GENMASK(field->offset + field->size - 1,
- field->offset));
-
- pin = sh_pfc_find_pin(info, drive->reg, field->pin);
- if (pin && !(pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH))
- sh_pfc_err("drive_reg 0x%x: field %u: pin %s lacks SH_PFC_PIN_CFG_DRIVE_STRENGTH flag\n",
- drive->reg, i, pin->name);
- }
-}
-
-static void __init sh_pfc_check_bias_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_bias_reg *bias)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
- u32 bits;
-
- for (i = 0, bits = 0; i < ARRAY_SIZE(bias->pins); i++)
- if (bias->pins[i] != SH_PFC_PIN_NONE)
- bits |= BIT(i);
-
- if (bias->puen)
- sh_pfc_check_reg(info->name, bias->puen, bits);
- if (bias->pud)
- sh_pfc_check_reg(info->name, bias->pud, bits);
- for (i = 0; i < ARRAY_SIZE(bias->pins); i++) {
- pin = sh_pfc_find_pin(info, bias->puen, bias->pins[i]);
- if (!pin)
- continue;
-
- if (bias->puen && bias->pud) {
- /*
- * Pull-enable and pull-up/down control registers
- * As some SoCs have pins that support only pull-up
- * or pull-down, we just check for one of them
- */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks one or more SH_PFC_PIN_CFG_PULL_* flags\n",
- bias->puen, i, pin->name);
- } else if (bias->puen) {
- /* Pull-up control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_UP flag\n",
- bias->puen, i, pin->name);
- } else if (bias->pud) {
- /* Pull-down control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_DOWN flag\n",
- bias->pud, i, pin->name);
- }
- }
-}
-
-static void __init sh_pfc_compare_groups(const char *drvname,
- const struct sh_pfc_pin_group *a,
- const struct sh_pfc_pin_group *b)
-{
- unsigned int i;
- size_t len;
-
- if (same_name(a->name, b->name))
- sh_pfc_err("group %s: name conflict\n", a->name);
-
- if (a->nr_pins > b->nr_pins)
- swap(a, b);
-
- len = a->nr_pins * sizeof(a->pins[0]);
- for (i = 0; i <= b->nr_pins - a->nr_pins; i++) {
- if (a->pins == b->pins + i || a->mux == b->mux + i ||
- memcmp(a->pins, b->pins + i, len) ||
- memcmp(a->mux, b->mux + i, len))
- continue;
-
- if (a->nr_pins == b->nr_pins)
- sh_pfc_warn("group %s can be an alias for %s\n",
- a->name, b->name);
- else
- sh_pfc_warn("group %s is a subset of %s\n", a->name,
- b->name);
- }
-}
-
-static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
-{
- const struct pinmux_drive_reg *drive_regs = info->drive_regs;
-#define drive_nfields ARRAY_SIZE(drive_regs->fields)
-#define drive_ofs(i) drive_regs[(i) / drive_nfields]
-#define drive_reg(i) drive_ofs(i).reg
-#define drive_bit(i) ((i) % drive_nfields)
-#define drive_field(i) drive_ofs(i).fields[drive_bit(i)]
- const struct pinmux_bias_reg *bias_regs = info->bias_regs;
-#define bias_npins ARRAY_SIZE(bias_regs->pins)
-#define bias_ofs(i) bias_regs[(i) / bias_npins]
-#define bias_puen(i) bias_ofs(i).puen
-#define bias_pud(i) bias_ofs(i).pud
-#define bias_bit(i) ((i) % bias_npins)
-#define bias_pin(i) bias_ofs(i).pins[bias_bit(i)]
- const char *drvname = info->name;
- unsigned int *refcnts;
- unsigned int i, j, k;
-
- pr_info("sh_pfc: Checking %s\n", drvname);
- sh_pfc_num_regs = 0;
- sh_pfc_num_enums = 0;
- sh_pfc_bias_done = false;
- sh_pfc_drive_done = false;
- sh_pfc_power_done = false;
-
- /* Check pins */
- for (i = 0; i < info->nr_pins; i++) {
- const struct sh_pfc_pin *pin = &info->pins[i];
- unsigned int x;
-
- if (!pin->name) {
- sh_pfc_err("empty pin %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- const struct sh_pfc_pin *pin2 = &info->pins[j];
-
- if (same_name(pin->name, pin2->name))
- sh_pfc_err("pin %s: name conflict\n",
- pin->name);
-
- if (pin->pin != (u16)-1 && pin->pin == pin2->pin)
- sh_pfc_err("pin %s/%s: pin %u conflict\n",
- pin->name, pin2->name, pin->pin);
-
- if (pin->enum_id && pin->enum_id == pin2->enum_id)
- sh_pfc_err("pin %s/%s: enum_id %u conflict\n",
- pin->name, pin2->name,
- pin->enum_id);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) {
- if (!info->ops || !info->ops->get_bias ||
- !info->ops->set_bias)
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_* flag set but .[gs]et_bias() not implemented\n");
-
- if (!bias_regs &&
- (!info->ops || !info->ops->pin_to_portcr))
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_UP flag set but no bias_regs defined and .pin_to_portcr() not implemented\n");
- }
-
- if ((pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) && bias_regs) {
- const struct pinmux_bias_reg *bias_reg =
- rcar_pin_to_bias_reg(info, pin->pin, &x);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_UP) &&
- !bias_reg->puen))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_UP flag set but pin not in bias_regs\n",
- pin->name);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_DOWN) &&
- !bias_reg->pud))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_DOWN flag set but pin not in bias_regs\n",
- pin->name);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH) {
- if (!drive_regs) {
- sh_pfc_err_once(drive, "SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but drive_regs missing\n");
- } else {
- for (j = 0; drive_reg(j); j++) {
- if (!drive_field(j).pin &&
- !drive_field(j).offset &&
- !drive_field(j).size)
- continue;
-
- if (drive_field(j).pin == pin->pin)
- break;
- }
-
- if (!drive_reg(j))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but not in drive_regs\n",
- pin->name);
- }
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_IO_VOLTAGE) {
- if (!info->ops || !info->ops->pin_to_pocctrl)
- sh_pfc_err_once(power, "SH_PFC_PIN_CFG_IO_VOLTAGE flag set but .pin_to_pocctrl() not implemented\n");
- else if (info->ops->pin_to_pocctrl(pin->pin, &x) < 0)
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE set but invalid pin_to_pocctrl()\n",
- pin->name);
- } else if (info->ops && info->ops->pin_to_pocctrl &&
- info->ops->pin_to_pocctrl(pin->pin, &x) >= 0) {
- sh_pfc_warn("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE not set but valid pin_to_pocctrl()\n",
- pin->name);
- }
- }
-
- /* Check groups and functions */
- refcnts = kcalloc(info->nr_groups, sizeof(*refcnts), GFP_KERNEL);
- if (!refcnts)
- return;
-
- for (i = 0; i < info->nr_functions; i++) {
- const struct sh_pfc_function *func = &info->functions[i];
-
- if (!func->name) {
- sh_pfc_err("empty function %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->functions[j].name))
- sh_pfc_err("function %s: name conflict\n",
- func->name);
- }
- for (j = 0; j < func->nr_groups; j++) {
- for (k = 0; k < info->nr_groups; k++) {
- if (same_name(func->groups[j],
- info->groups[k].name)) {
- refcnts[k]++;
- break;
- }
- }
-
- if (k == info->nr_groups)
- sh_pfc_err("function %s: group %s not found\n",
- func->name, func->groups[j]);
- }
- }
-
- for (i = 0; i < info->nr_groups; i++) {
- const struct sh_pfc_pin_group *group = &info->groups[i];
-
- if (!group->name) {
- sh_pfc_err("empty group %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++)
- sh_pfc_compare_groups(drvname, group, &info->groups[j]);
-
- if (!refcnts[i])
- sh_pfc_err("orphan group %s\n", group->name);
- else if (refcnts[i] > 1)
- sh_pfc_warn("group %s referenced by %u functions\n",
- group->name, refcnts[i]);
- }
-
- kfree(refcnts);
-
- /* Check config register descriptions */
- for (i = 0; info->cfg_regs && info->cfg_regs[i].reg; i++)
- sh_pfc_check_cfg_reg(drvname, &info->cfg_regs[i]);
-
- /* Check drive strength registers */
- for (i = 0; drive_regs && drive_regs[i].reg; i++)
- sh_pfc_check_drive_reg(info, &drive_regs[i]);
-
- for (i = 0; drive_regs && drive_reg(i); i++) {
- if (!drive_field(i).pin && !drive_field(i).offset &&
- !drive_field(i).size)
- continue;
-
- for (j = 0; j < i; j++) {
- if (drive_field(i).pin == drive_field(j).pin &&
- drive_field(j).offset && drive_field(j).size) {
- sh_pfc_err("drive_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- drive_reg(i), drive_bit(i),
- drive_reg(j), drive_bit(j));
- }
- }
- }
-
- /* Check bias registers */
- for (i = 0; bias_regs && (bias_regs[i].puen || bias_regs[i].pud); i++)
- sh_pfc_check_bias_reg(info, &bias_regs[i]);
-
- for (i = 0; bias_regs && (bias_puen(i) || bias_pud(i)); i++) {
- if (bias_pin(i) == SH_PFC_PIN_NONE)
- continue;
-
- for (j = 0; j < i; j++) {
- if (bias_pin(i) != bias_pin(j))
- continue;
-
- if (bias_puen(i) && bias_puen(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_puen(i), bias_bit(i),
- bias_puen(j), bias_bit(j));
- if (bias_pud(i) && bias_pud(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_pud(i), bias_bit(i),
- bias_pud(j), bias_bit(j));
- }
- }
-
- /* Check ioctrl registers */
- for (i = 0; info->ioctrl_regs && info->ioctrl_regs[i].reg; i++)
- sh_pfc_check_reg(drvname, info->ioctrl_regs[i].reg, U32_MAX);
-
- /* Check data registers */
- for (i = 0; info->data_regs && info->data_regs[i].reg; i++) {
- sh_pfc_check_reg(drvname, info->data_regs[i].reg,
- GENMASK(info->data_regs[i].reg_width - 1, 0));
- sh_pfc_check_reg_enums(drvname, info->data_regs[i].reg,
- info->data_regs[i].enum_ids,
- info->data_regs[i].reg_width);
- }
-
-#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
- /* Check function GPIOs */
- for (i = 0; i < info->nr_func_gpios; i++) {
- const struct pinmux_func *func = &info->func_gpios[i];
-
- if (!func->name) {
- sh_pfc_err("empty function gpio %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->func_gpios[j].name))
- sh_pfc_err("func_gpio %s: name conflict\n",
- func->name);
- }
- if (sh_pfc_check_enum(drvname, func->enum_id))
- sh_pfc_err("%s enum_id %u conflict\n", func->name,
- func->enum_id);
- }
-#endif
-}
-
-static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
-{
- unsigned int i;
-
- if (!IS_ENABLED(CONFIG_SUPERH) &&
- !of_find_matching_node(NULL, pdrv->driver.of_match_table))
- return;
-
- sh_pfc_regs = kcalloc(SH_PFC_MAX_REGS, sizeof(*sh_pfc_regs),
- GFP_KERNEL);
- if (!sh_pfc_regs)
- return;
-
- sh_pfc_enums = kcalloc(SH_PFC_MAX_ENUMS, sizeof(*sh_pfc_enums),
- GFP_KERNEL);
- if (!sh_pfc_enums)
- goto free_regs;
-
- pr_warn("sh_pfc: Checking builtin pinmux tables\n");
-
- for (i = 0; pdrv->id_table[i].name[0]; i++)
- sh_pfc_check_info((void *)pdrv->id_table[i].driver_data);
-
-#ifdef CONFIG_OF
- for (i = 0; pdrv->driver.of_match_table[i].compatible[0]; i++)
- sh_pfc_check_info(pdrv->driver.of_match_table[i].data);
-#endif
-
- pr_warn("sh_pfc: Detected %u errors and %u warnings\n", sh_pfc_errors,
- sh_pfc_warnings);
-
- kfree(sh_pfc_enums);
-free_regs:
- kfree(sh_pfc_regs);
-}
-
-#else /* !DEBUG */
-static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {}
-#endif /* !DEBUG */
-
#ifdef CONFIG_OF
static const void *sh_pfc_quirk_match(void)
{
@@ -1409,49 +853,8 @@ static int sh_pfc_probe(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id sh_pfc_id_table[] = {
-#ifdef CONFIG_PINCTRL_PFC_SH7203
- { "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7264
- { "pfc-sh7264", (kernel_ulong_t)&sh7264_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7269
- { "pfc-sh7269", (kernel_ulong_t)&sh7269_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7720
- { "pfc-sh7720", (kernel_ulong_t)&sh7720_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7722
- { "pfc-sh7722", (kernel_ulong_t)&sh7722_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7723
- { "pfc-sh7723", (kernel_ulong_t)&sh7723_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7724
- { "pfc-sh7724", (kernel_ulong_t)&sh7724_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7734
- { "pfc-sh7734", (kernel_ulong_t)&sh7734_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7757
- { "pfc-sh7757", (kernel_ulong_t)&sh7757_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7785
- { "pfc-sh7785", (kernel_ulong_t)&sh7785_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7786
- { "pfc-sh7786", (kernel_ulong_t)&sh7786_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SHX3
- { "pfc-shx3", (kernel_ulong_t)&shx3_pinmux_info },
-#endif
- { },
-};
-
static struct platform_driver sh_pfc_driver = {
.probe = sh_pfc_probe,
- .id_table = sh_pfc_id_table,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(sh_pfc_of_table),
@@ -1461,7 +864,6 @@ static struct platform_driver sh_pfc_driver = {
static int __init sh_pfc_init(void)
{
- sh_pfc_check_driver(&sh_pfc_driver);
return platform_driver_register(&sh_pfc_driver);
}
postcore_initcall(sh_pfc_init);
diff --git a/drivers/pinctrl/renesas/pfc-sh7203.c b/drivers/pinctrl/renesas/pfc-sh7203.c
deleted file mode 100644
index 19735746b1bb21..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7203.c
+++ /dev/null
@@ -1,1577 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7203.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PC14_IN, PC13_IN, PC12_IN,
- PC11_IN, PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE15_IN, PE14_IN, PE13_IN, PE12_IN,
- PE11_IN, PE10_IN, PE9_IN, PE8_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF30_IN, PF29_IN, PF28_IN,
- PF27_IN, PF26_IN, PF25_IN, PF24_IN,
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PC14_OUT, PC13_OUT, PC12_OUT,
- PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE15_OUT, PE14_OUT, PE13_OUT, PE12_OUT,
- PE11_OUT, PE10_OUT, PE9_OUT, PE8_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF30_OUT, PF29_OUT, PF28_OUT,
- PF27_OUT, PF26_OUT, PF25_OUT, PF24_OUT,
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_0, PB11MD_1,
- PB10MD_0, PB10MD_1,
- PB9MD_00, PB9MD_01, PB9MD_10,
- PB8MD_00, PB8MD_01, PB8MD_10,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
-
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10,
-
- PC14MD_0, PC14MD_1,
- PC13MD_0, PC13MD_1,
- PC12MD_0, PC12MD_1,
- PC11MD_00, PC11MD_01, PC11MD_10,
- PC10MD_00, PC10MD_01, PC10MD_10,
- PC9MD_0, PC9MD_1,
- PC8MD_0, PC8MD_1,
- PC7MD_0, PC7MD_1,
- PC6MD_0, PC6MD_1,
- PC5MD_0, PC5MD_1,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_00, PC0MD_01, PC0MD_10,
-
- PD15MD_000, PD15MD_001, PD15MD_010, PD15MD_100, PD15MD_101,
- PD14MD_000, PD14MD_001, PD14MD_010, PD14MD_101,
- PD13MD_000, PD13MD_001, PD13MD_010, PD13MD_100, PD13MD_101,
- PD12MD_000, PD12MD_001, PD12MD_010, PD12MD_100, PD12MD_101,
- PD11MD_000, PD11MD_001, PD11MD_010, PD11MD_100, PD11MD_101,
- PD10MD_000, PD10MD_001, PD10MD_010, PD10MD_100, PD10MD_101,
- PD9MD_000, PD9MD_001, PD9MD_010, PD9MD_100, PD9MD_101,
- PD8MD_000, PD8MD_001, PD8MD_010, PD8MD_100, PD8MD_101,
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011, PD7MD_100, PD7MD_101,
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011, PD6MD_100, PD6MD_101,
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011, PD5MD_100, PD5MD_101,
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011, PD4MD_100, PD4MD_101,
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011, PD3MD_100, PD3MD_101,
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011, PD2MD_100, PD2MD_101,
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011, PD1MD_100, PD1MD_101,
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011, PD0MD_100, PD0MD_101,
-
- PE15MD_00, PE15MD_01, PE15MD_11,
- PE14MD_00, PE14MD_01, PE14MD_11,
- PE13MD_00, PE13MD_11,
- PE12MD_00, PE12MD_11,
- PE11MD_000, PE11MD_001, PE11MD_010, PE11MD_100,
- PE10MD_000, PE10MD_001, PE10MD_010, PE10MD_100,
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011, PE7MD_100,
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011, PE6MD_100,
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011, PE5MD_100,
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011, PE4MD_100,
- PE3MD_00, PE3MD_01, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_11,
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- PE0MD_000, PE0MD_001, PE0MD_011, PE0MD_100,
-
- PF30MD_0, PF30MD_1,
- PF29MD_0, PF29MD_1,
- PF28MD_0, PF28MD_1,
- PF27MD_0, PF27MD_1,
- PF26MD_0, PF26MD_1,
- PF25MD_0, PF25MD_1,
- PF24MD_0, PF24MD_1,
- PF23MD_00, PF23MD_01, PF23MD_10,
- PF22MD_00, PF22MD_01, PF22MD_10,
- PF21MD_00, PF21MD_01, PF21MD_10,
- PF20MD_00, PF20MD_01, PF20MD_10,
- PF19MD_00, PF19MD_01, PF19MD_10,
- PF18MD_00, PF18MD_01, PF18MD_10,
- PF17MD_00, PF17MD_01, PF17MD_10,
- PF16MD_00, PF16MD_01, PF16MD_10,
- PF15MD_00, PF15MD_01, PF15MD_10,
- PF14MD_00, PF14MD_01, PF14MD_10,
- PF13MD_00, PF13MD_01, PF13MD_10,
- PF12MD_00, PF12MD_01, PF12MD_10,
- PF11MD_00, PF11MD_01, PF11MD_10,
- PF10MD_00, PF10MD_01, PF10MD_10,
- PF9MD_00, PF9MD_01, PF9MD_10,
- PF8MD_00, PF8MD_01, PF8MD_10,
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- PINT7_PB_MARK, PINT6_PB_MARK, PINT5_PB_MARK, PINT4_PB_MARK,
- PINT3_PB_MARK, PINT2_PB_MARK, PINT1_PB_MARK, PINT0_PB_MARK,
- PINT7_PD_MARK, PINT6_PD_MARK, PINT5_PD_MARK, PINT4_PD_MARK,
- PINT3_PD_MARK, PINT2_PD_MARK, PINT1_PD_MARK, PINT0_PD_MARK,
- IRQ7_PB_MARK, IRQ6_PB_MARK, IRQ5_PB_MARK, IRQ4_PB_MARK,
- IRQ3_PB_MARK, IRQ2_PB_MARK, IRQ1_PB_MARK, IRQ0_PB_MARK,
- IRQ7_PD_MARK, IRQ6_PD_MARK, IRQ5_PD_MARK, IRQ4_PD_MARK,
- IRQ3_PD_MARK, IRQ2_PD_MARK, IRQ1_PD_MARK, IRQ0_PD_MARK,
- IRQ7_PE_MARK, IRQ6_PE_MARK, IRQ5_PE_MARK, IRQ4_PE_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
- WDTOVF_MARK, IRQOUT_MARK, REFOUT_MARK, IRQOUT_REFOUT_MARK,
- UBCTRG_MARK,
- CTX1_MARK, CRX1_MARK, CTX0_MARK, CTX0_CTX1_MARK,
- CRX0_MARK, CRX0_CRX1_MARK,
- SDA3_MARK, SCL3_MARK,
- SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK,
- SDA0_MARK, SCL0_MARK,
- TEND0_PD_MARK, TEND0_PE_MARK, DACK0_PD_MARK, DACK0_PE_MARK,
- DREQ0_PD_MARK, DREQ0_PE_MARK, TEND1_PD_MARK, TEND1_PE_MARK,
- DACK1_PD_MARK, DACK1_PE_MARK, DREQ1_PD_MARK, DREQ1_PE_MARK,
- DACK2_MARK, DREQ2_MARK, DACK3_MARK, DREQ3_MARK,
- ADTRG_PD_MARK, ADTRG_PE_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, CS4_MARK, MRES_MARK, BS_MARK,
- IOIS16_MARK, CS1_MARK, CS6_CE1B_MARK, CE2B_MARK,
- CS5_CE1A_MARK, CE2A_MARK, FRAME_MARK, WAIT_MARK,
- RDWR_MARK, CKE_MARK, CASU_MARK, BREQ_MARK,
- RASU_MARK, BACK_MARK, CASL_MARK, RASL_MARK,
- WE3_DQMUU_AH_ICIO_WR_MARK, WE2_DQMUL_ICIORD_MARK,
- WE1_DQMLU_WE_MARK, WE0_DQMLL_MARK,
- CS3_MARK, CS2_MARK, A1_MARK, A0_MARK, CS7_MARK,
- TIOC4D_MARK, TIOC4C_MARK, TIOC4B_MARK, TIOC4A_MARK,
- TIOC3D_MARK, TIOC3C_MARK, TIOC3B_MARK, TIOC3A_MARK,
- TIOC2B_MARK, TIOC1B_MARK, TIOC2A_MARK, TIOC1A_MARK,
- TIOC0D_MARK, TIOC0C_MARK, TIOC0B_MARK, TIOC0A_MARK,
- TCLKD_PD_MARK, TCLKC_PD_MARK, TCLKB_PD_MARK, TCLKA_PD_MARK,
- TCLKD_PF_MARK, TCLKC_PF_MARK, TCLKB_PF_MARK, TCLKA_PF_MARK,
- SCS0_PD_MARK, SSO0_PD_MARK, SSI0_PD_MARK, SSCK0_PD_MARK,
- SCS0_PF_MARK, SSO0_PF_MARK, SSI0_PF_MARK, SSCK0_PF_MARK,
- SCS1_PD_MARK, SSO1_PD_MARK, SSI1_PD_MARK, SSCK1_PD_MARK,
- SCS1_PF_MARK, SSO1_PF_MARK, SSI1_PF_MARK, SSCK1_PF_MARK,
- TXD0_MARK, RXD0_MARK, SCK0_MARK,
- TXD1_MARK, RXD1_MARK, SCK1_MARK,
- TXD2_MARK, RXD2_MARK, SCK2_MARK,
- RTS3_MARK, CTS3_MARK, TXD3_MARK,
- RXD3_MARK, SCK3_MARK,
- AUDIO_CLK_MARK,
- SSIDATA3_MARK, SSIWS3_MARK, SSISCK3_MARK,
- SSIDATA2_MARK, SSIWS2_MARK, SSISCK2_MARK,
- SSIDATA1_MARK, SSIWS1_MARK, SSISCK1_MARK,
- SSIDATA0_MARK, SSIWS0_MARK, SSISCK0_MARK,
- FCE_MARK, FRB_MARK,
- NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK,
- FSC_MARK, FOE_MARK, FCDE_MARK, FWE_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK, LCD_CLK_MARK, LCD_FLM_MARK,
- LCD_M_DISP_MARK, LCD_CL2_MARK, LCD_CL1_MARK, LCD_DON_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA */
- PINMUX_DATA(PA7_DATA, PA7_IN),
- PINMUX_DATA(PA6_DATA, PA6_IN),
- PINMUX_DATA(PA5_DATA, PA5_IN),
- PINMUX_DATA(PA4_DATA, PA4_IN),
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* PB */
- PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
- PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
- PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
- PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
- PINMUX_DATA(IRQOUT_REFOUT_MARK, PB12MD_10, PB12IRQ_10),
- PINMUX_DATA(UBCTRG_MARK, PB12MD_11),
-
- PINMUX_DATA(PB11_DATA, PB11MD_0, PB11_IN, PB11_OUT),
- PINMUX_DATA(CTX1_MARK, PB11MD_1),
-
- PINMUX_DATA(PB10_DATA, PB10MD_0, PB10_IN, PB10_OUT),
- PINMUX_DATA(CRX1_MARK, PB10MD_1),
-
- PINMUX_DATA(PB9_DATA, PB9MD_00, PB9_IN, PB9_OUT),
- PINMUX_DATA(CTX0_MARK, PB9MD_01),
- PINMUX_DATA(CTX0_CTX1_MARK, PB9MD_10),
-
- PINMUX_DATA(PB8_DATA, PB8MD_00, PB8_IN, PB8_OUT),
- PINMUX_DATA(CRX0_MARK, PB8MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
-
- PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
- PINMUX_DATA(SDA3_MARK, PB7MD_01),
- PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
- PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
-
- PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
- PINMUX_DATA(SCL3_MARK, PB6MD_01),
- PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
- PINMUX_DATA(SDA2_MARK, PB6MD_01),
- PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
- PINMUX_DATA(SCL2_MARK, PB4MD_01),
- PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
- PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
-
- PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
- PINMUX_DATA(SDA1_MARK, PB3MD_01),
- PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
- PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
-
- PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
- PINMUX_DATA(SCL1_MARK, PB2MD_01),
- PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
- PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
-
- PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
- PINMUX_DATA(SDA0_MARK, PB1MD_01),
- PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
- PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
-
- PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
- PINMUX_DATA(SCL0_MARK, PB0MD_01),
- PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
- PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
-
- /* PC */
- PINMUX_DATA(PC14_DATA, PC14MD_0, PC14_IN, PC14_OUT),
- PINMUX_DATA(WAIT_MARK, PC14MD_1),
-
- PINMUX_DATA(PC13_DATA, PC13MD_0, PC13_IN, PC13_OUT),
- PINMUX_DATA(RDWR_MARK, PC13MD_1),
-
- PINMUX_DATA(PC12_DATA, PC12MD_0, PC12_IN, PC12_OUT),
- PINMUX_DATA(CKE_MARK, PC12MD_1),
-
- PINMUX_DATA(PC11_DATA, PC11MD_00, PC11_IN, PC11_OUT),
- PINMUX_DATA(CASU_MARK, PC11MD_01),
- PINMUX_DATA(BREQ_MARK, PC11MD_10),
-
- PINMUX_DATA(PC10_DATA, PC10MD_00, PC10_IN, PC10_OUT),
- PINMUX_DATA(RASU_MARK, PC10MD_01),
- PINMUX_DATA(BACK_MARK, PC10MD_10),
-
- PINMUX_DATA(PC9_DATA, PC9MD_0, PC9_IN, PC9_OUT),
- PINMUX_DATA(CASL_MARK, PC9MD_1),
-
- PINMUX_DATA(PC8_DATA, PC8MD_0, PC8_IN, PC8_OUT),
- PINMUX_DATA(RASL_MARK, PC8MD_1),
-
- PINMUX_DATA(PC7_DATA, PC7MD_0, PC7_IN, PC7_OUT),
- PINMUX_DATA(WE3_DQMUU_AH_ICIO_WR_MARK, PC7MD_1),
-
- PINMUX_DATA(PC6_DATA, PC6MD_0, PC6_IN, PC6_OUT),
- PINMUX_DATA(WE2_DQMUL_ICIORD_MARK, PC6MD_1),
-
- PINMUX_DATA(PC5_DATA, PC5MD_0, PC5_IN, PC5_OUT),
- PINMUX_DATA(WE1_DQMLU_WE_MARK, PC5MD_1),
-
- PINMUX_DATA(PC4_DATA, PC4MD_0, PC4_IN, PC4_OUT),
- PINMUX_DATA(WE0_DQMLL_MARK, PC4MD_1),
-
- PINMUX_DATA(PC3_DATA, PC3MD_0, PC3_IN, PC3_OUT),
- PINMUX_DATA(CS3_MARK, PC3MD_1),
-
- PINMUX_DATA(PC2_DATA, PC2MD_0, PC2_IN, PC2_OUT),
- PINMUX_DATA(CS2_MARK, PC2MD_1),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0, PC1_IN, PC1_OUT),
- PINMUX_DATA(A1_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_00, PC0_IN, PC0_OUT),
- PINMUX_DATA(A0_MARK, PC0MD_01),
- PINMUX_DATA(CS7_MARK, PC0MD_10),
-
- /* PD */
- PINMUX_DATA(PD15_DATA, PD15MD_000, PD15_IN, PD15_OUT),
- PINMUX_DATA(D31_MARK, PD15MD_001),
- PINMUX_DATA(PINT7_PD_MARK, PD15MD_010),
- PINMUX_DATA(ADTRG_PD_MARK, PD15MD_100),
- PINMUX_DATA(TIOC4D_MARK, PD15MD_101),
-
- PINMUX_DATA(PD14_DATA, PD14MD_000, PD14_IN, PD14_OUT),
- PINMUX_DATA(D30_MARK, PD14MD_001),
- PINMUX_DATA(PINT6_PD_MARK, PD14MD_010),
- PINMUX_DATA(TIOC4C_MARK, PD14MD_101),
-
- PINMUX_DATA(PD13_DATA, PD13MD_000, PD13_IN, PD13_OUT),
- PINMUX_DATA(D29_MARK, PD13MD_001),
- PINMUX_DATA(PINT5_PD_MARK, PD13MD_010),
- PINMUX_DATA(TEND1_PD_MARK, PD13MD_100),
- PINMUX_DATA(TIOC4B_MARK, PD13MD_101),
-
- PINMUX_DATA(PD12_DATA, PD12MD_000, PD12_IN, PD12_OUT),
- PINMUX_DATA(D28_MARK, PD12MD_001),
- PINMUX_DATA(PINT4_PD_MARK, PD12MD_010),
- PINMUX_DATA(DACK1_PD_MARK, PD12MD_100),
- PINMUX_DATA(TIOC4A_MARK, PD12MD_101),
-
- PINMUX_DATA(PD11_DATA, PD11MD_000, PD11_IN, PD11_OUT),
- PINMUX_DATA(D27_MARK, PD11MD_001),
- PINMUX_DATA(PINT3_PD_MARK, PD11MD_010),
- PINMUX_DATA(DREQ1_PD_MARK, PD11MD_100),
- PINMUX_DATA(TIOC3D_MARK, PD11MD_101),
-
- PINMUX_DATA(PD10_DATA, PD10MD_000, PD10_IN, PD10_OUT),
- PINMUX_DATA(D26_MARK, PD10MD_001),
- PINMUX_DATA(PINT2_PD_MARK, PD10MD_010),
- PINMUX_DATA(TEND0_PD_MARK, PD10MD_100),
- PINMUX_DATA(TIOC3C_MARK, PD10MD_101),
-
- PINMUX_DATA(PD9_DATA, PD9MD_000, PD9_IN, PD9_OUT),
- PINMUX_DATA(D25_MARK, PD9MD_001),
- PINMUX_DATA(PINT1_PD_MARK, PD9MD_010),
- PINMUX_DATA(DACK0_PD_MARK, PD9MD_100),
- PINMUX_DATA(TIOC3B_MARK, PD9MD_101),
-
- PINMUX_DATA(PD8_DATA, PD8MD_000, PD8_IN, PD8_OUT),
- PINMUX_DATA(D24_MARK, PD8MD_001),
- PINMUX_DATA(PINT0_PD_MARK, PD8MD_010),
- PINMUX_DATA(DREQ0_PD_MARK, PD8MD_100),
- PINMUX_DATA(TIOC3A_MARK, PD8MD_101),
-
- PINMUX_DATA(PD7_DATA, PD7MD_000, PD7_IN, PD7_OUT),
- PINMUX_DATA(D23_MARK, PD7MD_001),
- PINMUX_DATA(IRQ7_PD_MARK, PD7MD_010),
- PINMUX_DATA(SCS1_PD_MARK, PD7MD_011),
- PINMUX_DATA(TCLKD_PD_MARK, PD7MD_100),
- PINMUX_DATA(TIOC2B_MARK, PD7MD_101),
-
- PINMUX_DATA(PD6_DATA, PD6MD_000, PD6_IN, PD6_OUT),
- PINMUX_DATA(D22_MARK, PD6MD_001),
- PINMUX_DATA(IRQ6_PD_MARK, PD6MD_010),
- PINMUX_DATA(SSO1_PD_MARK, PD6MD_011),
- PINMUX_DATA(TCLKC_PD_MARK, PD6MD_100),
- PINMUX_DATA(TIOC2A_MARK, PD6MD_101),
-
- PINMUX_DATA(PD5_DATA, PD5MD_000, PD5_IN, PD5_OUT),
- PINMUX_DATA(D21_MARK, PD5MD_001),
- PINMUX_DATA(IRQ5_PD_MARK, PD5MD_010),
- PINMUX_DATA(SSI1_PD_MARK, PD5MD_011),
- PINMUX_DATA(TCLKB_PD_MARK, PD5MD_100),
- PINMUX_DATA(TIOC1B_MARK, PD5MD_101),
-
- PINMUX_DATA(PD4_DATA, PD4MD_000, PD4_IN, PD4_OUT),
- PINMUX_DATA(D20_MARK, PD4MD_001),
- PINMUX_DATA(IRQ4_PD_MARK, PD4MD_010),
- PINMUX_DATA(SSCK1_PD_MARK, PD4MD_011),
- PINMUX_DATA(TCLKA_PD_MARK, PD4MD_100),
- PINMUX_DATA(TIOC1A_MARK, PD4MD_101),
-
- PINMUX_DATA(PD3_DATA, PD3MD_000, PD3_IN, PD3_OUT),
- PINMUX_DATA(D19_MARK, PD3MD_001),
- PINMUX_DATA(IRQ3_PD_MARK, PD3MD_010),
- PINMUX_DATA(SCS0_PD_MARK, PD3MD_011),
- PINMUX_DATA(DACK3_MARK, PD3MD_100),
- PINMUX_DATA(TIOC0D_MARK, PD3MD_101),
-
- PINMUX_DATA(PD2_DATA, PD2MD_000, PD2_IN, PD2_OUT),
- PINMUX_DATA(D18_MARK, PD2MD_001),
- PINMUX_DATA(IRQ2_PD_MARK, PD2MD_010),
- PINMUX_DATA(SSO0_PD_MARK, PD2MD_011),
- PINMUX_DATA(DREQ3_MARK, PD2MD_100),
- PINMUX_DATA(TIOC0C_MARK, PD2MD_101),
-
- PINMUX_DATA(PD1_DATA, PD1MD_000, PD1_IN, PD1_OUT),
- PINMUX_DATA(D17_MARK, PD1MD_001),
- PINMUX_DATA(IRQ1_PD_MARK, PD1MD_010),
- PINMUX_DATA(SSI0_PD_MARK, PD1MD_011),
- PINMUX_DATA(DACK2_MARK, PD1MD_100),
- PINMUX_DATA(TIOC0B_MARK, PD1MD_101),
-
- PINMUX_DATA(PD0_DATA, PD0MD_000, PD0_IN, PD0_OUT),
- PINMUX_DATA(D16_MARK, PD0MD_001),
- PINMUX_DATA(IRQ0_PD_MARK, PD0MD_010),
- PINMUX_DATA(SSCK0_PD_MARK, PD0MD_011),
- PINMUX_DATA(DREQ2_MARK, PD0MD_100),
- PINMUX_DATA(TIOC0A_MARK, PD0MD_101),
-
- /* PE */
- PINMUX_DATA(PE15_DATA, PE15MD_00, PE15_IN, PE15_OUT),
- PINMUX_DATA(IOIS16_MARK, PE15MD_01),
- PINMUX_DATA(RTS3_MARK, PE15MD_11),
-
- PINMUX_DATA(PE14_DATA, PE14MD_00, PE14_IN, PE14_OUT),
- PINMUX_DATA(CS1_MARK, PE14MD_01),
- PINMUX_DATA(CTS3_MARK, PE14MD_11),
-
- PINMUX_DATA(PE13_DATA, PE13MD_00, PE13_IN, PE13_OUT),
- PINMUX_DATA(TXD3_MARK, PE13MD_11),
-
- PINMUX_DATA(PE12_DATA, PE12MD_00, PE12_IN, PE12_OUT),
- PINMUX_DATA(RXD3_MARK, PE12MD_11),
-
- PINMUX_DATA(PE11_DATA, PE11MD_000, PE11_IN, PE11_OUT),
- PINMUX_DATA(CS6_CE1B_MARK, PE11MD_001),
- PINMUX_DATA(IRQ7_PE_MARK, PE11MD_010),
- PINMUX_DATA(TEND1_PE_MARK, PE11MD_100),
-
- PINMUX_DATA(PE10_DATA, PE10MD_000, PE10_IN, PE10_OUT),
- PINMUX_DATA(CE2B_MARK, PE10MD_001),
- PINMUX_DATA(IRQ6_PE_MARK, PE10MD_010),
- PINMUX_DATA(TEND0_PE_MARK, PE10MD_100),
-
- PINMUX_DATA(PE9_DATA, PE9MD_00, PE9_IN, PE9_OUT),
- PINMUX_DATA(CS5_CE1A_MARK, PE9MD_01),
- PINMUX_DATA(IRQ5_PE_MARK, PE9MD_10),
- PINMUX_DATA(SCK3_MARK, PE9MD_11),
-
- PINMUX_DATA(PE8_DATA, PE8MD_00, PE8_IN, PE8_OUT),
- PINMUX_DATA(CE2A_MARK, PE8MD_01),
- PINMUX_DATA(IRQ4_PE_MARK, PE8MD_10),
- PINMUX_DATA(SCK2_MARK, PE8MD_11),
-
- PINMUX_DATA(PE7_DATA, PE7MD_000, PE7_IN, PE7_OUT),
- PINMUX_DATA(FRAME_MARK, PE7MD_001),
- PINMUX_DATA(IRQ3_PE_MARK, PE7MD_010),
- PINMUX_DATA(TXD2_MARK, PE7MD_011),
- PINMUX_DATA(DACK1_PE_MARK, PE7MD_100),
-
- PINMUX_DATA(PE6_DATA, PE6MD_000, PE6_IN, PE6_OUT),
- PINMUX_DATA(A25_MARK, PE6MD_001),
- PINMUX_DATA(IRQ2_PE_MARK, PE6MD_010),
- PINMUX_DATA(RXD2_MARK, PE6MD_011),
- PINMUX_DATA(DREQ1_PE_MARK, PE6MD_100),
-
- PINMUX_DATA(PE5_DATA, PE5MD_000, PE5_IN, PE5_OUT),
- PINMUX_DATA(A24_MARK, PE5MD_001),
- PINMUX_DATA(IRQ1_PE_MARK, PE5MD_010),
- PINMUX_DATA(TXD1_MARK, PE5MD_011),
- PINMUX_DATA(DACK0_PE_MARK, PE5MD_100),
-
- PINMUX_DATA(PE4_DATA, PE4MD_000, PE4_IN, PE4_OUT),
- PINMUX_DATA(A23_MARK, PE4MD_001),
- PINMUX_DATA(IRQ0_PE_MARK, PE4MD_010),
- PINMUX_DATA(RXD1_MARK, PE4MD_011),
- PINMUX_DATA(DREQ0_PE_MARK, PE4MD_100),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00, PE3_IN, PE3_OUT),
- PINMUX_DATA(A22_MARK, PE3MD_01),
- PINMUX_DATA(SCK1_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00, PE2_IN, PE2_OUT),
- PINMUX_DATA(A21_MARK, PE2MD_01),
- PINMUX_DATA(SCK0_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_00, PE1_IN, PE1_OUT),
- PINMUX_DATA(CS4_MARK, PE1MD_01),
- PINMUX_DATA(MRES_MARK, PE1MD_10),
- PINMUX_DATA(TXD0_MARK, PE1MD_11),
-
- PINMUX_DATA(PE0_DATA, PE0MD_000, PE0_IN, PE0_OUT),
- PINMUX_DATA(BS_MARK, PE0MD_001),
- PINMUX_DATA(RXD0_MARK, PE0MD_011),
- PINMUX_DATA(ADTRG_PE_MARK, PE0MD_100),
-
- /* PF */
- PINMUX_DATA(PF30_DATA, PF30MD_0, PF30_IN, PF30_OUT),
- PINMUX_DATA(AUDIO_CLK_MARK, PF30MD_1),
-
- PINMUX_DATA(PF29_DATA, PF29MD_0, PF29_IN, PF29_OUT),
- PINMUX_DATA(SSIDATA3_MARK, PF29MD_1),
-
- PINMUX_DATA(PF28_DATA, PF28MD_0, PF28_IN, PF28_OUT),
- PINMUX_DATA(SSIWS3_MARK, PF28MD_1),
-
- PINMUX_DATA(PF27_DATA, PF27MD_0, PF27_IN, PF27_OUT),
- PINMUX_DATA(SSISCK3_MARK, PF27MD_1),
-
- PINMUX_DATA(PF26_DATA, PF26MD_0, PF26_IN, PF26_OUT),
- PINMUX_DATA(SSIDATA2_MARK, PF26MD_1),
-
- PINMUX_DATA(PF25_DATA, PF25MD_0, PF25_IN, PF25_OUT),
- PINMUX_DATA(SSIWS2_MARK, PF25MD_1),
-
- PINMUX_DATA(PF24_DATA, PF24MD_0, PF24_IN, PF24_OUT),
- PINMUX_DATA(SSISCK2_MARK, PF24MD_1),
-
- PINMUX_DATA(PF23_DATA, PF23MD_00, PF23_IN, PF23_OUT),
- PINMUX_DATA(SSIDATA1_MARK, PF23MD_01),
- PINMUX_DATA(LCD_VEPWC_MARK, PF23MD_10),
-
- PINMUX_DATA(PF22_DATA, PF22MD_00, PF22_IN, PF22_OUT),
- PINMUX_DATA(SSIWS1_MARK, PF22MD_01),
- PINMUX_DATA(LCD_VCPWC_MARK, PF22MD_10),
-
- PINMUX_DATA(PF21_DATA, PF21MD_00, PF21_IN, PF21_OUT),
- PINMUX_DATA(SSISCK1_MARK, PF21MD_01),
- PINMUX_DATA(LCD_CLK_MARK, PF21MD_10),
-
- PINMUX_DATA(PF20_DATA, PF20MD_00, PF20_IN, PF20_OUT),
- PINMUX_DATA(SSIDATA0_MARK, PF20MD_01),
- PINMUX_DATA(LCD_FLM_MARK, PF20MD_10),
-
- PINMUX_DATA(PF19_DATA, PF19MD_00, PF19_IN, PF19_OUT),
- PINMUX_DATA(SSIWS0_MARK, PF19MD_01),
- PINMUX_DATA(LCD_M_DISP_MARK, PF19MD_10),
-
- PINMUX_DATA(PF18_DATA, PF18MD_00, PF18_IN, PF18_OUT),
- PINMUX_DATA(SSISCK0_MARK, PF18MD_01),
- PINMUX_DATA(LCD_CL2_MARK, PF18MD_10),
-
- PINMUX_DATA(PF17_DATA, PF17MD_00, PF17_IN, PF17_OUT),
- PINMUX_DATA(FCE_MARK, PF17MD_01),
- PINMUX_DATA(LCD_CL1_MARK, PF17MD_10),
-
- PINMUX_DATA(PF16_DATA, PF16MD_00, PF16_IN, PF16_OUT),
- PINMUX_DATA(FRB_MARK, PF16MD_01),
- PINMUX_DATA(LCD_DON_MARK, PF16MD_10),
-
- PINMUX_DATA(PF15_DATA, PF15MD_00, PF15_IN, PF15_OUT),
- PINMUX_DATA(NAF7_MARK, PF15MD_01),
- PINMUX_DATA(LCD_DATA15_MARK, PF15MD_10),
-
- PINMUX_DATA(PF14_DATA, PF14MD_00, PF14_IN, PF14_OUT),
- PINMUX_DATA(NAF6_MARK, PF14MD_01),
- PINMUX_DATA(LCD_DATA14_MARK, PF14MD_10),
-
- PINMUX_DATA(PF13_DATA, PF13MD_00, PF13_IN, PF13_OUT),
- PINMUX_DATA(NAF5_MARK, PF13MD_01),
- PINMUX_DATA(LCD_DATA13_MARK, PF13MD_10),
-
- PINMUX_DATA(PF12_DATA, PF12MD_00, PF12_IN, PF12_OUT),
- PINMUX_DATA(NAF4_MARK, PF12MD_01),
- PINMUX_DATA(LCD_DATA12_MARK, PF12MD_10),
-
- PINMUX_DATA(PF11_DATA, PF11MD_00, PF11_IN, PF11_OUT),
- PINMUX_DATA(NAF3_MARK, PF11MD_01),
- PINMUX_DATA(LCD_DATA11_MARK, PF11MD_10),
-
- PINMUX_DATA(PF10_DATA, PF10MD_00, PF10_IN, PF10_OUT),
- PINMUX_DATA(NAF2_MARK, PF10MD_01),
- PINMUX_DATA(LCD_DATA10_MARK, PF10MD_10),
-
- PINMUX_DATA(PF9_DATA, PF9MD_00, PF9_IN, PF9_OUT),
- PINMUX_DATA(NAF1_MARK, PF9MD_01),
- PINMUX_DATA(LCD_DATA9_MARK, PF9MD_10),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00, PF8_IN, PF8_OUT),
- PINMUX_DATA(NAF0_MARK, PF8MD_01),
- PINMUX_DATA(LCD_DATA8_MARK, PF8MD_10),
-
- PINMUX_DATA(PF7_DATA, PF7MD_00, PF7_IN, PF7_OUT),
- PINMUX_DATA(FSC_MARK, PF7MD_01),
- PINMUX_DATA(LCD_DATA7_MARK, PF7MD_10),
- PINMUX_DATA(SCS1_PF_MARK, PF7MD_11),
-
- PINMUX_DATA(PF6_DATA, PF6MD_00, PF6_IN, PF6_OUT),
- PINMUX_DATA(FOE_MARK, PF6MD_01),
- PINMUX_DATA(LCD_DATA6_MARK, PF6MD_10),
- PINMUX_DATA(SSO1_PF_MARK, PF6MD_11),
-
- PINMUX_DATA(PF5_DATA, PF5MD_00, PF5_IN, PF5_OUT),
- PINMUX_DATA(FCDE_MARK, PF5MD_01),
- PINMUX_DATA(LCD_DATA5_MARK, PF5MD_10),
- PINMUX_DATA(SSI1_PF_MARK, PF5MD_11),
-
- PINMUX_DATA(PF4_DATA, PF4MD_00, PF4_IN, PF4_OUT),
- PINMUX_DATA(FWE_MARK, PF4MD_01),
- PINMUX_DATA(LCD_DATA4_MARK, PF4MD_10),
- PINMUX_DATA(SSCK1_PF_MARK, PF4MD_11),
-
- PINMUX_DATA(PF3_DATA, PF3MD_00, PF3_IN, PF3_OUT),
- PINMUX_DATA(TCLKD_PF_MARK, PF3MD_01),
- PINMUX_DATA(LCD_DATA3_MARK, PF3MD_10),
- PINMUX_DATA(SCS0_PF_MARK, PF3MD_11),
-
- PINMUX_DATA(PF2_DATA, PF2MD_00, PF2_IN, PF2_OUT),
- PINMUX_DATA(TCLKC_PF_MARK, PF2MD_01),
- PINMUX_DATA(LCD_DATA2_MARK, PF2MD_10),
- PINMUX_DATA(SSO0_PF_MARK, PF2MD_11),
-
- PINMUX_DATA(PF1_DATA, PF1MD_00, PF1_IN, PF1_OUT),
- PINMUX_DATA(TCLKB_PF_MARK, PF1MD_01),
- PINMUX_DATA(LCD_DATA1_MARK, PF1MD_10),
- PINMUX_DATA(SSI0_PF_MARK, PF1MD_11),
-
- PINMUX_DATA(PF0_DATA, PF0MD_00, PF0_IN, PF0_OUT),
- PINMUX_DATA(TCLKA_PF_MARK, PF0MD_01),
- PINMUX_DATA(LCD_DATA0_MARK, PF0MD_10),
- PINMUX_DATA(SSCK0_PF_MARK, PF0MD_11),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC14),
- PINMUX_GPIO(PC13),
- PINMUX_GPIO(PC12),
- PINMUX_GPIO(PC11),
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE15),
- PINMUX_GPIO(PE14),
- PINMUX_GPIO(PE13),
- PINMUX_GPIO(PE12),
- PINMUX_GPIO(PE11),
- PINMUX_GPIO(PE10),
- PINMUX_GPIO(PE9),
- PINMUX_GPIO(PE8),
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF30),
- PINMUX_GPIO(PF29),
- PINMUX_GPIO(PF28),
- PINMUX_GPIO(PF27),
- PINMUX_GPIO(PF26),
- PINMUX_GPIO(PF25),
- PINMUX_GPIO(PF24),
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PB),
- GPIO_FN(PINT6_PB),
- GPIO_FN(PINT5_PB),
- GPIO_FN(PINT4_PB),
- GPIO_FN(PINT3_PB),
- GPIO_FN(PINT2_PB),
- GPIO_FN(PINT1_PB),
- GPIO_FN(PINT0_PB),
- GPIO_FN(PINT7_PD),
- GPIO_FN(PINT6_PD),
- GPIO_FN(PINT5_PD),
- GPIO_FN(PINT4_PD),
- GPIO_FN(PINT3_PD),
- GPIO_FN(PINT2_PD),
- GPIO_FN(PINT1_PD),
- GPIO_FN(PINT0_PD),
- GPIO_FN(IRQ7_PB),
- GPIO_FN(IRQ6_PB),
- GPIO_FN(IRQ5_PB),
- GPIO_FN(IRQ4_PB),
- GPIO_FN(IRQ3_PB),
- GPIO_FN(IRQ2_PB),
- GPIO_FN(IRQ1_PB),
- GPIO_FN(IRQ0_PB),
- GPIO_FN(IRQ7_PD),
- GPIO_FN(IRQ6_PD),
- GPIO_FN(IRQ5_PD),
- GPIO_FN(IRQ4_PD),
- GPIO_FN(IRQ3_PD),
- GPIO_FN(IRQ2_PD),
- GPIO_FN(IRQ1_PD),
- GPIO_FN(IRQ0_PD),
- GPIO_FN(IRQ7_PE),
- GPIO_FN(IRQ6_PE),
- GPIO_FN(IRQ5_PE),
- GPIO_FN(IRQ4_PE),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- GPIO_FN(WDTOVF),
- GPIO_FN(IRQOUT),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT_REFOUT),
- GPIO_FN(UBCTRG),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* IIC3 */
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* DMAC */
- GPIO_FN(TEND0_PD),
- GPIO_FN(TEND0_PE),
- GPIO_FN(DACK0_PD),
- GPIO_FN(DACK0_PE),
- GPIO_FN(DREQ0_PD),
- GPIO_FN(DREQ0_PE),
- GPIO_FN(TEND1_PD),
- GPIO_FN(TEND1_PE),
- GPIO_FN(DACK1_PD),
- GPIO_FN(DACK1_PE),
- GPIO_FN(DREQ1_PD),
- GPIO_FN(DREQ1_PE),
- GPIO_FN(DACK2),
- GPIO_FN(DREQ2),
- GPIO_FN(DACK3),
- GPIO_FN(DREQ3),
-
- /* ADC */
- GPIO_FN(ADTRG_PD),
- GPIO_FN(ADTRG_PE),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(CS4),
- GPIO_FN(MRES),
- GPIO_FN(BS),
- GPIO_FN(IOIS16),
- GPIO_FN(CS1),
- GPIO_FN(CS6_CE1B),
- GPIO_FN(CE2B),
- GPIO_FN(CS5_CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(FRAME),
- GPIO_FN(WAIT),
- GPIO_FN(RDWR),
- GPIO_FN(CKE),
- GPIO_FN(CASU),
- GPIO_FN(BREQ),
- GPIO_FN(RASU),
- GPIO_FN(BACK),
- GPIO_FN(CASL),
- GPIO_FN(RASL),
- GPIO_FN(WE3_DQMUU_AH_ICIO_WR),
- GPIO_FN(WE2_DQMUL_ICIORD),
- GPIO_FN(WE1_DQMLU_WE),
- GPIO_FN(WE0_DQMLL),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(CS7),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD_PD),
- GPIO_FN(TCLKC_PD),
- GPIO_FN(TCLKB_PD),
- GPIO_FN(TCLKA_PD),
- GPIO_FN(TCLKD_PF),
- GPIO_FN(TCLKC_PF),
- GPIO_FN(TCLKB_PF),
- GPIO_FN(TCLKA_PF),
-
- /* SSU */
- GPIO_FN(SCS0_PD),
- GPIO_FN(SSO0_PD),
- GPIO_FN(SSI0_PD),
- GPIO_FN(SSCK0_PD),
- GPIO_FN(SCS0_PF),
- GPIO_FN(SSO0_PF),
- GPIO_FN(SSI0_PF),
- GPIO_FN(SSCK0_PF),
- GPIO_FN(SCS1_PD),
- GPIO_FN(SSO1_PD),
- GPIO_FN(SSI1_PD),
- GPIO_FN(SSCK1_PD),
- GPIO_FN(SCS1_PF),
- GPIO_FN(SSO1_PF),
- GPIO_FN(SSI1_PF),
- GPIO_FN(SSCK1_PF),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
-
- /* SSI */
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(SSIDATA3),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSIDATA0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSISCK0),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FSC),
- GPIO_FN(FOE),
- GPIO_FN(FCDE),
- GPIO_FN(FWE),
-
- /* LCDC */
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PBIORL", 0xfffe3886, 16,
- GROUP(-4, 1, 1, 1, 1, -8),
- GROUP(
- /* RESERVED [4] */
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("PBCRL4", 0xfffe3890, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL3", 0xfffe3892, 16, 4, GROUP(
- PB11MD_0, PB11MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_0, PB10MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL2", 0xfffe3894, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL1", 0xfffe3896, 16, 4, GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IFCR", 0xfffe38a2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCIORL", 0xfffe3906, 16, 1, GROUP(
- 0, 0,
- PC14_IN, PC14_OUT,
- PC13_IN, PC13_OUT,
- PC12_IN, PC12_OUT,
- PC11_IN, PC11_OUT,
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PCCRL4", 0xfffe3910, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC14MD_0, PC14MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC13MD_0, PC13MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC12MD_0, PC12MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL3", 0xfffe3912, 16, 4, GROUP(
- PC11MD_00, PC11MD_01, PC11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC10MD_00, PC10MD_01, PC10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC9MD_0, PC9MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC8MD_0, PC8MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL2", 0xfffe3914, 16, 4, GROUP(
- PC7MD_0, PC7MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_0, PC6MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_0, PC5MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_0, PC4MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL1", 0xfffe3916, 16, 4, GROUP(
- PC3MD_0, PC3MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_0, PC2MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_00, PC0MD_01, PC0MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDIORL", 0xfffe3986, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
- { PINMUX_CFG_REG("PDCRL4", 0xfffe3990, 16, 4, GROUP(
- PD15MD_000, PD15MD_001, PD15MD_010, 0,
- PD15MD_100, PD15MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_000, PD14MD_001, PD14MD_010, 0,
- 0, PD14MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_000, PD13MD_001, PD13MD_010, 0,
- PD13MD_100, PD13MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_000, PD12MD_001, PD12MD_010, 0,
- PD12MD_100, PD12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL3", 0xfffe3992, 16, 4, GROUP(
- PD11MD_000, PD11MD_001, PD11MD_010, 0,
- PD11MD_100, PD11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_000, PD10MD_001, PD10MD_010, 0,
- PD10MD_100, PD10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_000, PD9MD_001, PD9MD_010, 0,
- PD9MD_100, PD9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_000, PD8MD_001, PD8MD_010, 0,
- PD8MD_100, PD8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL2", 0xfffe3994, 16, 4, GROUP(
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011,
- PD7MD_100, PD7MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011,
- PD6MD_100, PD6MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011,
- PD5MD_100, PD5MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011,
- PD4MD_100, PD4MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL1", 0xfffe3996, 16, 4, GROUP(
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011,
- PD3MD_100, PD3MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011,
- PD2MD_100, PD2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011,
- PD1MD_100, PD1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011,
- PD0MD_100, PD0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PEIORL", 0xfffe3a06, 16, 1, GROUP(
- PE15_IN, PE15_OUT,
- PE14_IN, PE14_OUT,
- PE13_IN, PE13_OUT,
- PE12_IN, PE12_OUT,
- PE11_IN, PE11_OUT,
- PE10_IN, PE10_OUT,
- PE9_IN, PE9_OUT,
- PE8_IN, PE8_OUT,
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
- { PINMUX_CFG_REG("PECRL4", 0xfffe3a10, 16, 4, GROUP(
- PE15MD_00, PE15MD_01, 0, PE15MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE14MD_00, PE14MD_01, 0, PE14MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE13MD_00, 0, 0, PE13MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE12MD_00, 0, 0, PE12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL3", 0xfffe3a12, 16, 4, GROUP(
- PE11MD_000, PE11MD_001, PE11MD_010, 0,
- PE11MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE10MD_000, PE10MD_001, PE10MD_010, 0,
- PE10MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL2", 0xfffe3a14, 16, 4, GROUP(
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011,
- PE7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011,
- PE6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011,
- PE5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011,
- PE4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL1", 0xfffe3a16, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_00, PE2MD_01, 0, PE2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_000, PE0MD_001, 0, PE0MD_011,
- PE0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFIORH", 0xfffe3a84, 16, 1, GROUP(
- 0, 0,
- PF30_IN, PF30_OUT,
- PF29_IN, PF29_OUT,
- PF28_IN, PF28_OUT,
- PF27_IN, PF27_OUT,
- PF26_IN, PF26_OUT,
- PF25_IN, PF25_OUT,
- PF24_IN, PF24_OUT,
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIORL", 0xfffe3a86, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PFCRH4", 0xfffe3a88, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
-
- PF30MD_0, PF30MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF29MD_0, PF29MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF28MD_0, PF28MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH3", 0xfffe3a8a, 16, 4, GROUP(
- PF27MD_0, PF27MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF26MD_0, PF26MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF25MD_0, PF25MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF24MD_0, PF24MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH2", 0xfffe3a8c, 16, 4, GROUP(
- PF23MD_00, PF23MD_01, PF23MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_00, PF22MD_01, PF22MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_00, PF21MD_01, PF21MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_00, PF20MD_01, PF20MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH1", 0xfffe3a8e, 16, 4, GROUP(
- PF19MD_00, PF19MD_01, PF19MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_00, PF18MD_01, PF18MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_00, PF17MD_01, PF17MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_00, PF16MD_01, PF16MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL4", 0xfffe3a90, 16, 4, GROUP(
- PF15MD_00, PF15MD_01, PF15MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF14MD_00, PF14MD_01, PF14MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_00, PF13MD_01, PF13MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_00, PF12MD_01, PF12MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL3", 0xfffe3a92, 16, 4, GROUP(
- PF11MD_00, PF11MD_01, PF11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_00, PF10MD_01, PF10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_00, PF9MD_01, PF9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_00, PF8MD_01, PF8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL2", 0xfffe3a94, 16, 4, GROUP(
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL1", 0xfffe3a96, 16, 4, GROUP(
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADRL", 0xfffe3802, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDRL", 0xfffe3882, 16, GROUP(
- 0, 0, 0, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDRL", 0xfffe3902, 16, GROUP(
- 0, PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDRL", 0xfffe3982, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDRL", 0xfffe3a02, 16, GROUP(
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDRH", 0xfffe3a80, 16, GROUP(
- 0, PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDRL", 0xfffe3a82, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7203_pinmux_info = {
- .name = "sh7203_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7264.c b/drivers/pinctrl/renesas/pfc-sh7264.c
deleted file mode 100644
index 30096925a70c5d..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7264.c
+++ /dev/null
@@ -1,2131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7264.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- /* Port K */
- PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- /* Port K */
- PK12_IN,
- PK11_IN, PK10_IN, PK9_IN, PK8_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- /* Port K */
- PK12_OUT,
- PK11_OUT, PK10_OUT, PK9_OUT, PK8_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA3_IOR_IN, PA3_IOR_OUT,
- PA2_IOR_IN, PA2_IOR_OUT,
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB22MD_00, PB22MD_01, PB22MD_10,
- PB21MD_0, PB21MD_1,
- PB20MD_0, PB20MD_1,
- PB19MD_00, PB19MD_01, PB19MD_10, PB19MD_11,
- PB18MD_00, PB18MD_01, PB18MD_10, PB18MD_11,
- PB17MD_00, PB17MD_01, PB17MD_10, PB17MD_11,
- PB16MD_00, PB16MD_01, PB16MD_10, PB16MD_11,
- PB15MD_00, PB15MD_01, PB15MD_10, PB15MD_11,
- PB14MD_00, PB14MD_01, PB14MD_10, PB14MD_11,
- PB13MD_00, PB13MD_01, PB13MD_10, PB13MD_11,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_0, PB3MD_1,
- PB2MD_0, PB2MD_1,
- PB1MD_0, PB1MD_1,
-
- /* Port C */
- PC14_IOR_IN, PC14_IOR_OUT,
- PC13_IOR_IN, PC13_IOR_OUT,
- PC12_IOR_IN, PC12_IOR_OUT,
- PC11_IOR_IN, PC11_IOR_OUT,
- PC10_IOR_IN, PC10_IOR_OUT,
- PC9_IOR_IN, PC9_IOR_OUT,
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC10MD_0, PC10MD_1,
- PC9MD_0, PC9MD_1,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11,
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
- PE3MD_00, PE3MD_01, PE3MD_10, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_10, PE2MD_11,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11,
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, PG17MD_101, PG17MD_110, PG17MD_111,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, PG16MD_101, PG16MD_110, PG16MD_111,
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, PG15MD_101, PG15MD_110, PG15MD_111,
- PG14MD_000, PG14MD_001, PG14MD_010, PG14MD_011,
- PG14MD_100, PG14MD_101, PG14MD_110, PG14MD_111,
- PG13MD_000, PG13MD_001, PG13MD_010, PG13MD_011,
- PG13MD_100, PG13MD_101, PG13MD_110, PG13MD_111,
- PG12MD_000, PG12MD_001, PG12MD_010, PG12MD_011,
- PG12MD_100, PG12MD_101, PG12MD_110, PG12MD_111,
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11,
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_0, PH7MD_1,
- PH6MD_0, PH6MD_1,
- PH5MD_0, PH5MD_1,
- PH4MD_0, PH4MD_1,
- PH3MD_0, PH3MD_1,
- PH2MD_0, PH2MD_1,
- PH1MD_0, PH1MD_1,
- PH0MD_0, PH0MD_1,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ11MD_00, PJ11MD_01, PJ11MD_10, PJ11MD_11,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, PJ10MD_11,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, PJ9MD_11,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, PJ8MD_11,
- PJ7MD_00, PJ7MD_01, PJ7MD_10, PJ7MD_11,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, PJ6MD_11,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, PJ5MD_11,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, PJ4MD_11,
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- /* Port K */
- PK11_IOR_IN, PK11_IOR_OUT,
- PK10_IOR_IN, PK10_IOR_OUT,
- PK9_IOR_IN, PK9_IOR_OUT,
- PK8_IOR_IN, PK8_IOR_OUT,
- PK7_IOR_IN, PK7_IOR_OUT,
- PK6_IOR_IN, PK6_IOR_OUT,
- PK5_IOR_IN, PK5_IOR_OUT,
- PK4_IOR_IN, PK4_IOR_OUT,
- PK3_IOR_IN, PK3_IOR_OUT,
- PK2_IOR_IN, PK2_IOR_OUT,
- PK1_IOR_IN, PK1_IOR_OUT,
- PK0_IOR_IN, PK0_IOR_OUT,
-
- PK11MD_00, PK11MD_01, PK11MD_10, PK11MD_11,
- PK10MD_00, PK10MD_01, PK10MD_10, PK10MD_11,
- PK9MD_00, PK9MD_01, PK9MD_10, PK9MD_11,
- PK8MD_00, PK8MD_01, PK8MD_10, PK8MD_11,
- PK7MD_00, PK7MD_01, PK7MD_10, PK7MD_11,
- PK6MD_00, PK6MD_01, PK6MD_10, PK6MD_11,
- PK5MD_00, PK5MD_01, PK5MD_10, PK5MD_11,
- PK4MD_00, PK4MD_01, PK4MD_10, PK4MD_11,
- PK3MD_00, PK3MD_01, PK3MD_10, PK3MD_11,
- PK2MD_00, PK2MD_01, PK2MD_10, PK2MD_11,
- PK1MD_00, PK1MD_01, PK1MD_10, PK1MD_11,
- PK0MD_00, PK0MD_01, PK0MD_10, PK0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port A */
-
- /* Port B */
-
- /* Port C */
-
- /* Port D */
-
- /* Port E */
-
- /* Port F */
-
- /* Port G */
-
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* Port I - not on device */
-
- /* Port J */
-
- /* Port K */
-
- IRQ7_PC_MARK, IRQ6_PC_MARK, IRQ5_PC_MARK, IRQ4_PC_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
-
- SD_CD_MARK, SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK,
- CRX0_MARK, CRX1_MARK,
- CTX0_MARK, CTX1_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
-
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
- IERXD_MARK, IETXD_MARK,
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS6CE1B_MARK, CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- ICIOWRAH_MARK,
- ICIORD_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, SCK1_MARK, SCK2_MARK, SCK3_MARK,
- RXD0_MARK, RXD1_MARK, RXD2_MARK, RXD3_MARK,
- TXD0_MARK, TXD1_MARK, TXD2_MARK, TXD3_MARK,
- RXD4_MARK, RXD5_MARK, RXD6_MARK, RXD7_MARK,
- TXD4_MARK, TXD5_MARK, TXD6_MARK, TXD7_MARK,
- RTS1_MARK, RTS3_MARK,
- CTS1_MARK, CTS3_MARK,
-
- /* RSPI */
- RSPCK0_MARK, RSPCK1_MARK,
- MOSI0_MARK, MOSI1_MARK,
- MISO0_PF12_MARK, MISO1_MARK, MISO1_PG19_MARK,
- SSL00_MARK, SSL10_MARK,
-
- /* IIC3 */
- SCL0_MARK, SCL1_MARK, SCL2_MARK,
- SDA0_MARK, SDA1_MARK, SDA2_MARK,
-
- /* SSI */
- SSISCK0_MARK,
- SSIWS0_MARK,
- SSITXD0_MARK,
- SSIRXD0_MARK,
- SSIWS1_MARK, SSIWS2_MARK, SSIWS3_MARK,
- SSISCK1_MARK, SSISCK2_MARK, SSISCK3_MARK,
- SSIDATA1_MARK, SSIDATA2_MARK, SSIDATA3_MARK,
- AUDIO_CLK_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* VDC3 */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_00, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_01),
- PINMUX_DATA(CS4_MARK, PB22MD_10),
-
- PINMUX_DATA(PB21_DATA, PB21MD_0, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_1),
- PINMUX_DATA(A20_MARK, PB20MD_1),
- PINMUX_DATA(A19_MARK, PB19MD_01),
- PINMUX_DATA(A18_MARK, PB18MD_01),
- PINMUX_DATA(A17_MARK, PB17MD_01),
- PINMUX_DATA(A16_MARK, PB16MD_01),
- PINMUX_DATA(A15_MARK, PB15MD_01),
- PINMUX_DATA(A14_MARK, PB14MD_01),
- PINMUX_DATA(A13_MARK, PB13MD_01),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_1),
- PINMUX_DATA(A2_MARK, PB2MD_1),
- PINMUX_DATA(A1_MARK, PB1MD_1),
-
- /* Port C */
- PINMUX_DATA(PC10_DATA, PC10MD_0),
- PINMUX_DATA(TIOC2B_MARK, PC1MD_1),
- PINMUX_DATA(PC9_DATA, PC9MD_0),
- PINMUX_DATA(TIOC2A_MARK, PC9MD_1),
- PINMUX_DATA(PC8_DATA, PC8MD_00),
- PINMUX_DATA(CS3_MARK, PC8MD_01),
- PINMUX_DATA(TIOC4D_MARK, PC8MD_10),
- PINMUX_DATA(IRQ7_PC_MARK, PC8MD_11),
- PINMUX_DATA(PC7_DATA, PC7MD_00),
- PINMUX_DATA(CKE_MARK, PC7MD_01),
- PINMUX_DATA(TIOC4C_MARK, PC7MD_10),
- PINMUX_DATA(IRQ6_PC_MARK, PC7MD_11),
- PINMUX_DATA(PC6_DATA, PC6MD_00),
- PINMUX_DATA(CAS_MARK, PC6MD_01),
- PINMUX_DATA(TIOC4B_MARK, PC6MD_10),
- PINMUX_DATA(IRQ5_PC_MARK, PC6MD_11),
- PINMUX_DATA(PC5_DATA, PC5MD_00),
- PINMUX_DATA(RAS_MARK, PC5MD_01),
- PINMUX_DATA(TIOC4A_MARK, PC5MD_10),
- PINMUX_DATA(IRQ4_PC_MARK, PC5MD_11),
- PINMUX_DATA(PC4_DATA, PC4MD_0),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_1),
- PINMUX_DATA(PC3_DATA, PC3MD_0),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_1),
- PINMUX_DATA(PC2_DATA, PC2MD_0),
- PINMUX_DATA(RDWR_MARK, PC2MD_1),
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00),
- PINMUX_DATA(SDA1_MARK, PE3MD_01),
- PINMUX_DATA(IRQ3_PE_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00),
- PINMUX_DATA(SCL1_MARK, PE2MD_01),
- PINMUX_DATA(IRQ2_PE_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(IOIS16_MARK, PE1MD_010),
- PINMUX_DATA(IRQ1_PE_MARK, PE1MD_011),
- PINMUX_DATA(TCLKA_MARK, PE1MD_100),
- PINMUX_DATA(ADTRG_MARK, PE1MD_101),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(AUDIO_CLK_MARK, PE0MD_10),
- PINMUX_DATA(IRQ0_PE_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(BS_MARK, PF12MD_001),
- PINMUX_DATA(MISO0_PF12_MARK, PF12MD_011),
- PINMUX_DATA(TIOC3D_MARK, PF12MD_100),
- PINMUX_DATA(SPDIF_OUT_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(A25_MARK, PF11MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF11MD_010),
- PINMUX_DATA(MOSI0_MARK, PF11MD_011),
- PINMUX_DATA(TIOC3C_MARK, PF11MD_100),
- PINMUX_DATA(SPDIF_IN_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(A24_MARK, PF10MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF10MD_010),
- PINMUX_DATA(SSL00_MARK, PF10MD_011),
- PINMUX_DATA(TIOC3B_MARK, PF10MD_100),
- PINMUX_DATA(FCE_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(A23_MARK, PF9MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF9MD_010),
- PINMUX_DATA(RSPCK0_MARK, PF9MD_011),
- PINMUX_DATA(TIOC3A_MARK, PF9MD_100),
- PINMUX_DATA(FRB_MARK, PF9MD_101),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00),
- PINMUX_DATA(CE2B_MARK, PF8MD_01),
- PINMUX_DATA(SSIDATA3_MARK, PF8MD_10),
- PINMUX_DATA(DV_CLK_MARK, PF8MD_11),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(CE2A_MARK, PF7MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF7MD_010),
- PINMUX_DATA(DV_DATA7_MARK, PF7MD_011),
- PINMUX_DATA(TCLKD_MARK, PF7MD_100),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CS6CE1B_MARK, PF6MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF6MD_010),
- PINMUX_DATA(DV_DATA6_MARK, PF6MD_011),
- PINMUX_DATA(TCLKB_MARK, PF6MD_100),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF5MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF5MD_010),
- PINMUX_DATA(DV_DATA5_MARK, PF5MD_011),
- PINMUX_DATA(TCLKC_MARK, PF5MD_100),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(ICIOWRAH_MARK, PF4MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF4MD_010),
- PINMUX_DATA(DV_DATA4_MARK, PF4MD_011),
- PINMUX_DATA(TXD3_MARK, PF4MD_100),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(ICIORD_MARK, PF3MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF3MD_010),
- PINMUX_DATA(DV_DATA3_MARK, PF3MD_011),
- PINMUX_DATA(RXD3_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(BACK_MARK, PF2MD_001),
- PINMUX_DATA(SSIDATA1_MARK, PF2MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF2MD_011),
- PINMUX_DATA(TXD2_MARK, PF2MD_100),
- PINMUX_DATA(DACK0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BREQ_MARK, PF1MD_001),
- PINMUX_DATA(SSIWS1_MARK, PF1MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF1MD_011),
- PINMUX_DATA(RXD2_MARK, PF1MD_100),
- PINMUX_DATA(DREQ0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(WAIT_MARK, PF0MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF0MD_010),
- PINMUX_DATA(DV_DATA0_MARK, PF0MD_011),
- PINMUX_DATA(SCK2_MARK, PF0MD_100),
- PINMUX_DATA(TEND0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(MOSI0_MARK, PG24MD_01),
- PINMUX_DATA(TIOC0D_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_00),
- PINMUX_DATA(MOSI1_MARK, PG23MD_01),
- PINMUX_DATA(TIOC0C_MARK, PG23MD_10),
-
- PINMUX_DATA(PG22_DATA, PG22MD_00),
- PINMUX_DATA(SSL10_MARK, PG22MD_01),
- PINMUX_DATA(TIOC0B_MARK, PG22MD_10),
-
- PINMUX_DATA(PG21_DATA, PG21MD_00),
- PINMUX_DATA(RSPCK1_MARK, PG21MD_01),
- PINMUX_DATA(TIOC0A_MARK, PG21MD_10),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG20MD_001),
- PINMUX_DATA(MISO1_MARK, PG20MD_011),
- PINMUX_DATA(TXD7_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(LCD_CLK_MARK, PG19MD_001),
- PINMUX_DATA(TIOC2B_MARK, PG19MD_010),
- PINMUX_DATA(MISO1_PG19_MARK, PG19MD_011),
- PINMUX_DATA(RXD7_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(LCD_DE_MARK, PG18MD_001),
- PINMUX_DATA(TIOC2A_MARK, PG18MD_010),
- PINMUX_DATA(SSL10_MARK, PG18MD_011),
- PINMUX_DATA(TXD6_MARK, PG18MD_100),
-
- PINMUX_DATA(PG17_DATA, PG17MD_000),
- PINMUX_DATA(LCD_HSYNC_MARK, PG17MD_001),
- PINMUX_DATA(TIOC1B_MARK, PG17MD_010),
- PINMUX_DATA(RSPCK1_MARK, PG17MD_011),
- PINMUX_DATA(RXD6_MARK, PG17MD_100),
-
- PINMUX_DATA(PG16_DATA, PG16MD_000),
- PINMUX_DATA(LCD_VSYNC_MARK, PG16MD_001),
- PINMUX_DATA(TIOC1A_MARK, PG16MD_010),
- PINMUX_DATA(TXD3_MARK, PG16MD_011),
- PINMUX_DATA(CTS1_MARK, PG16MD_100),
-
- PINMUX_DATA(PG15_DATA, PG15MD_000),
- PINMUX_DATA(LCD_DATA15_MARK, PG15MD_001),
- PINMUX_DATA(TIOC0D_MARK, PG15MD_010),
- PINMUX_DATA(RXD3_MARK, PG15MD_011),
- PINMUX_DATA(RTS1_MARK, PG15MD_100),
-
- PINMUX_DATA(PG14_DATA, PG14MD_000),
- PINMUX_DATA(LCD_DATA14_MARK, PG14MD_001),
- PINMUX_DATA(TIOC0C_MARK, PG14MD_010),
- PINMUX_DATA(SCK1_MARK, PG14MD_100),
-
- PINMUX_DATA(PG13_DATA, PG13MD_000),
- PINMUX_DATA(LCD_DATA13_MARK, PG13MD_001),
- PINMUX_DATA(TIOC0B_MARK, PG13MD_010),
- PINMUX_DATA(TXD1_MARK, PG13MD_100),
-
- PINMUX_DATA(PG12_DATA, PG12MD_000),
- PINMUX_DATA(LCD_DATA12_MARK, PG12MD_001),
- PINMUX_DATA(TIOC0A_MARK, PG12MD_010),
- PINMUX_DATA(RXD1_MARK, PG12MD_100),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(LCD_DATA11_MARK, PG11MD_001),
- PINMUX_DATA(SSITXD0_MARK, PG11MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TXD5_MARK, PG11MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PG11MD_101),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(LCD_DATA10_MARK, PG10MD_001),
- PINMUX_DATA(SSIRXD0_MARK, PG10MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG10MD_011),
- PINMUX_DATA(RXD5_MARK, PG10MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PG10MD_101),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(LCD_DATA9_MARK, PG9MD_001),
- PINMUX_DATA(SSIWS0_MARK, PG9MD_010),
- PINMUX_DATA(TXD4_MARK, PG9MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PG9MD_101),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(LCD_DATA8_MARK, PG8MD_001),
- PINMUX_DATA(SSISCK0_MARK, PG8MD_010),
- PINMUX_DATA(RXD4_MARK, PG8MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PG8MD_101),
-
- PINMUX_DATA(PG7_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA7_MARK, PG7MD_01),
- PINMUX_DATA(SD_CD_MARK, PG7MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG6_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA6_MARK, PG7MD_01),
- PINMUX_DATA(SD_WP_MARK, PG7MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG5_DATA, PG5MD_00),
- PINMUX_DATA(LCD_DATA5_MARK, PG5MD_01),
- PINMUX_DATA(SD_D1_MARK, PG5MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG5MD_11),
-
- PINMUX_DATA(PG4_DATA, PG4MD_00),
- PINMUX_DATA(LCD_DATA4_MARK, PG4MD_01),
- PINMUX_DATA(SD_D0_MARK, PG4MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG4MD_11),
-
- PINMUX_DATA(PG3_DATA, PG3MD_00),
- PINMUX_DATA(LCD_DATA3_MARK, PG3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PG3MD_10),
- PINMUX_DATA(PINT3_PG_MARK, PG3MD_11),
-
- PINMUX_DATA(PG2_DATA, PG2MD_00),
- PINMUX_DATA(LCD_DATA2_MARK, PG2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PG2MD_10),
- PINMUX_DATA(PINT2_PG_MARK, PG2MD_11),
-
- PINMUX_DATA(PG1_DATA, PG1MD_00),
- PINMUX_DATA(LCD_DATA1_MARK, PG1MD_01),
- PINMUX_DATA(SD_D3_MARK, PG1MD_10),
- PINMUX_DATA(PINT1_PG_MARK, PG1MD_11),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(LCD_DATA0_MARK, PG0MD_001),
- PINMUX_DATA(SD_D2_MARK, PG0MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG0MD_011),
- PINMUX_DATA(WDTOVF_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_0),
- PINMUX_DATA(PHAN7_MARK, PH7MD_1),
-
- PINMUX_DATA(PH6_DATA, PH6MD_0),
- PINMUX_DATA(PHAN6_MARK, PH6MD_1),
-
- PINMUX_DATA(PH5_DATA, PH5MD_0),
- PINMUX_DATA(PHAN5_MARK, PH5MD_1),
-
- PINMUX_DATA(PH4_DATA, PH4MD_0),
- PINMUX_DATA(PHAN4_MARK, PH4MD_1),
-
- PINMUX_DATA(PH3_DATA, PH3MD_0),
- PINMUX_DATA(PHAN3_MARK, PH3MD_1),
-
- PINMUX_DATA(PH2_DATA, PH2MD_0),
- PINMUX_DATA(PHAN2_MARK, PH2MD_1),
-
- PINMUX_DATA(PH1_DATA, PH1MD_0),
- PINMUX_DATA(PHAN1_MARK, PH1MD_1),
-
- PINMUX_DATA(PH0_DATA, PH0MD_0),
- PINMUX_DATA(PHAN0_MARK, PH0MD_1),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ11_DATA, PJ11MD_00),
- PINMUX_DATA(PWM2H_MARK, PJ11MD_01),
- PINMUX_DATA(DACK1_MARK, PJ11MD_10),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_00),
- PINMUX_DATA(PWM2G_MARK, PJ10MD_01),
- PINMUX_DATA(DREQ1_MARK, PJ10MD_10),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_00),
- PINMUX_DATA(PWM2F_MARK, PJ9MD_01),
- PINMUX_DATA(TEND1_MARK, PJ9MD_10),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_00),
- PINMUX_DATA(PWM2E_MARK, PJ8MD_01),
- PINMUX_DATA(RTS3_MARK, PJ8MD_10),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_00),
- PINMUX_DATA(TIOC1B_MARK, PJ7MD_01),
- PINMUX_DATA(CTS3_MARK, PJ7MD_10),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_00),
- PINMUX_DATA(TIOC1A_MARK, PJ6MD_01),
- PINMUX_DATA(SCK3_MARK, PJ6MD_10),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_00),
- PINMUX_DATA(IERXD_MARK, PJ5MD_01),
- PINMUX_DATA(TXD3_MARK, PJ5MD_10),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_00),
- PINMUX_DATA(IETXD_MARK, PJ4MD_01),
- PINMUX_DATA(RXD3_MARK, PJ4MD_10),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_00),
- PINMUX_DATA(CRX1_MARK, PJ3MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(CTX1_MARK, PJ2MD_001),
- PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010),
- PINMUX_DATA(CS2_MARK, PJ2MD_011),
- PINMUX_DATA(SCK0_MARK, PJ2MD_100),
- PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(CRX0_MARK, PJ1MD_001),
- PINMUX_DATA(IERXD_MARK, PJ1MD_010),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ1MD_011),
- PINMUX_DATA(RXD0_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(CTX0_MARK, PJ0MD_001),
- PINMUX_DATA(IERXD_MARK, PJ0MD_010),
- PINMUX_DATA(CS1_MARK, PJ0MD_011),
- PINMUX_DATA(TXD0_MARK, PJ0MD_100),
- PINMUX_DATA(A0_MARK, PJ0MD_101),
-
- /* Port K */
- PINMUX_DATA(PK11_DATA, PK11MD_00),
- PINMUX_DATA(PWM2D_MARK, PK11MD_01),
- PINMUX_DATA(SSITXD0_MARK, PK11MD_10),
-
- PINMUX_DATA(PK10_DATA, PK10MD_00),
- PINMUX_DATA(PWM2C_MARK, PK10MD_01),
- PINMUX_DATA(SSIRXD0_MARK, PK10MD_10),
-
- PINMUX_DATA(PK9_DATA, PK9MD_00),
- PINMUX_DATA(PWM2B_MARK, PK9MD_01),
- PINMUX_DATA(SSIWS0_MARK, PK9MD_10),
-
- PINMUX_DATA(PK8_DATA, PK8MD_00),
- PINMUX_DATA(PWM2A_MARK, PK8MD_01),
- PINMUX_DATA(SSISCK0_MARK, PK8MD_10),
-
- PINMUX_DATA(PK7_DATA, PK7MD_00),
- PINMUX_DATA(PWM1H_MARK, PK7MD_01),
- PINMUX_DATA(SD_CD_MARK, PK7MD_10),
-
- PINMUX_DATA(PK6_DATA, PK6MD_00),
- PINMUX_DATA(PWM1G_MARK, PK6MD_01),
- PINMUX_DATA(SD_WP_MARK, PK6MD_10),
-
- PINMUX_DATA(PK5_DATA, PK5MD_00),
- PINMUX_DATA(PWM1F_MARK, PK5MD_01),
- PINMUX_DATA(SD_D1_MARK, PK5MD_10),
-
- PINMUX_DATA(PK4_DATA, PK4MD_00),
- PINMUX_DATA(PWM1E_MARK, PK4MD_01),
- PINMUX_DATA(SD_D0_MARK, PK4MD_10),
-
- PINMUX_DATA(PK3_DATA, PK3MD_00),
- PINMUX_DATA(PWM1D_MARK, PK3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PK3MD_10),
-
- PINMUX_DATA(PK2_DATA, PK2MD_00),
- PINMUX_DATA(PWM1C_MARK, PK2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PK2MD_10),
-
- PINMUX_DATA(PK1_DATA, PK1MD_00),
- PINMUX_DATA(PWM1B_MARK, PK1MD_01),
- PINMUX_DATA(SD_D3_MARK, PK1MD_10),
-
- PINMUX_DATA(PK0_DATA, PK0MD_00),
- PINMUX_DATA(PWM1A_MARK, PK0MD_01),
- PINMUX_DATA(SD_D2_MARK, PK0MD_10),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* Port K */
- PINMUX_GPIO(PK11),
- PINMUX_GPIO(PK10),
- PINMUX_GPIO(PK9),
- PINMUX_GPIO(PK8),
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
-
- GPIO_FN(IRQ7_PC),
- GPIO_FN(IRQ6_PC),
- GPIO_FN(IRQ5_PC),
- GPIO_FN(IRQ4_PC),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS6CE1B),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(ICIOWRAH),
- GPIO_FN(ICIORD),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
-
- /* RSPI */
- GPIO_FN(RSPCK0),
- GPIO_FN(MOSI0),
- GPIO_FN(MISO0_PF12),
- GPIO_FN(MISO1),
- GPIO_FN(SSL00),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1_PG19),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-12, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [12] */
- PA3_IN, PA3_OUT,
- PA2_IN, PA2_OUT,
- PA1_IN, PA1_OUT,
- PA0_IN, PA0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_00, PB22MD_01, PB22MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB21MD_0, PB21MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB20MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
-
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- 0, PB19MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB18MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB17MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB16MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- 0, PB15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- 0, PB11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- 0, PB7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- 0, PB3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
-
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC10MD_0, PC10MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC9MD_0, PC9MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC4MD_0, PC4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_0, PC3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC2MD_0, PC2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [5] */
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- 0, PD15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- 0, PD11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- 0, PD7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- 0, PD3MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD2MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD1MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD0MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PECR1", 0xfffe388c, 16,
- GROUP(-8, 4, 4),
- GROUP(
- /* RESERVED [8] */
- PE5MD_00, PE5MD_01, 0, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE4MD_00, PE4MD_01, 0, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE2MD_00, PE2MD_01, 0, PE2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-10, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [10] */
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF12MD_000, PF12MD_001, 0, PF12MD_011,
- PF12MD_100, PF12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR7", 0xfffe38c0, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR6", 0xfffe38c2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG14MD_000, PG14MD_001, PG14MD_010, 0,
- PG14MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG13MD_000, PG13MD_001, PG13MD_010, 0,
- PG13MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG12MD_000, PG12MD_001, PG12MD_010, 0,
- PG12MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR0", 0xfffe38ce, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG_VAR("PGIOR1", 0xfffe38d0, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
-
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_0, PH7MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH6MD_0, PH6MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH5MD_0, PH5MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH4MD_0, PH4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_0, PH3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH2MD_0, PH2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH1MD_0, PH1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH0MD_0, PH0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_00, PJ11MD_01, PJ11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_00, PJ7MD_01, PJ7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- { PINMUX_CFG_REG("PKCR2", 0xfffe392a, 16, 4, GROUP(
- PK11MD_00, PK11MD_01, PK11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK10MD_00, PK10MD_01, PK10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK9MD_00, PK9MD_01, PK9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK8MD_00, PK8MD_01, PK8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKCR1", 0xfffe392c, 16, 4, GROUP(
- PK7MD_00, PK7MD_01, PK7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK6MD_00, PK6MD_01, PK6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK5MD_00, PK5MD_01, PK5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK4MD_00, PK4MD_01, PK4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PKCR0", 0xfffe392e, 16, 4, GROUP(
- PK3MD_00, PK3MD_01, PK3MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK2MD_00, PK2MD_01, PK2MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK1MD_00, PK1MD_01, PK1MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK0MD_00, PK0MD_01, PK0MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKIOR0", 0xfffe3932, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK11_IN, PK11_OUT,
- PK10_IN, PK10_OUT,
- PK9_IN, PK9_OUT,
- PK8_IN, PK8_OUT,
- PK7_IN, PK7_OUT,
- PK6_IN, PK6_OUT,
- PK5_IN, PK5_OUT,
- PK4_IN, PK4_OUT,
- PK3_IN, PK3_OUT,
- PK2_IN, PK2_OUT,
- PK1_IN, PK1_OUT,
- PK0_IN, PK0_OUT ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR1", 0xfffe3814, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA3_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA2_DATA ))
- },
-
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- 0, 0, 0, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- 0, 0, 0, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR0", 0xfffe3936, 16, GROUP(
- 0, 0, 0, PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { }
-};
-
-const struct sh_pfc_soc_info sh7264_pinmux_info = {
- .name = "sh7264_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7269.c b/drivers/pinctrl/renesas/pfc-sh7269.c
deleted file mode 100644
index f59f558d75ae25..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7269.c
+++ /dev/null
@@ -1,2851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7269.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA,
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG27_IN, PG26_IN, PG25_IN, PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_IN, PJ30_IN, PJ29_IN, PJ28_IN,
- PJ27_IN, PJ26_IN, PJ25_IN, PJ24_IN,
- PJ23_IN, PJ22_IN, PJ21_IN, PJ20_IN,
- PJ19_IN, PJ18_IN, PJ17_IN, PJ16_IN,
- PJ15_IN, PJ14_IN, PJ13_IN, PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG27_OUT, PG26_OUT, PG25_OUT, PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_OUT, PJ30_OUT, PJ29_OUT, PJ28_OUT,
- PJ27_OUT, PJ26_OUT, PJ25_OUT, PJ24_OUT,
- PJ23_OUT, PJ22_OUT, PJ21_OUT, PJ20_OUT,
- PJ19_OUT, PJ18_OUT, PJ17_OUT, PJ16_OUT,
- PJ15_OUT, PJ14_OUT, PJ13_OUT, PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB22_IOR_IN, PB22_IOR_OUT,
- PB21_IOR_IN, PB21_IOR_OUT,
- PB20_IOR_IN, PB20_IOR_OUT,
- PB19_IOR_IN, PB19_IOR_OUT,
- PB18_IOR_IN, PB18_IOR_OUT,
- PB17_IOR_IN, PB17_IOR_OUT,
- PB16_IOR_IN, PB16_IOR_OUT,
-
- PB15_IOR_IN, PB15_IOR_OUT,
- PB14_IOR_IN, PB14_IOR_OUT,
- PB13_IOR_IN, PB13_IOR_OUT,
- PB12_IOR_IN, PB12_IOR_OUT,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB7_IOR_IN, PB7_IOR_OUT,
- PB6_IOR_IN, PB6_IOR_OUT,
- PB5_IOR_IN, PB5_IOR_OUT,
- PB4_IOR_IN, PB4_IOR_OUT,
- PB3_IOR_IN, PB3_IOR_OUT,
- PB2_IOR_IN, PB2_IOR_OUT,
- PB1_IOR_IN, PB1_IOR_OUT,
- PB0_IOR_IN, PB0_IOR_OUT,
-
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11,
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
-
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
-
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
-
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
-
- /* Port C */
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11,
-
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11,
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
-
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
-
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
-
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE7_IOR_IN, PE7_IOR_OUT,
- PE6_IOR_IN, PE6_IOR_OUT,
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11,
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11,
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
-
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF23_IOR_IN, PF23_IOR_OUT,
- PF22_IOR_IN, PF22_IOR_OUT,
- PF21_IOR_IN, PF21_IOR_OUT,
- PF20_IOR_IN, PF20_IOR_OUT,
- PF19_IOR_IN, PF19_IOR_OUT,
- PF18_IOR_IN, PF18_IOR_OUT,
- PF17_IOR_IN, PF17_IOR_OUT,
- PF16_IOR_IN, PF16_IOR_OUT,
- PF15_IOR_IN, PF15_IOR_OUT,
- PF14_IOR_IN, PF14_IOR_OUT,
- PF13_IOR_IN, PF13_IOR_OUT,
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
-
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
-
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
-
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
-
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
-
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG27_IOR_IN, PG27_IOR_OUT,
- PG26_IOR_IN, PG26_IOR_OUT,
- PG25_IOR_IN, PG25_IOR_OUT,
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11,
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11,
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11,
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
-
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
-
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11,
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11,
-
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11,
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11,
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11,
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11,
-
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
-
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
-
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11,
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11,
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11,
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11,
-
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11,
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11,
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11,
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ31_IOR_IN, PJ31_IOR_OUT,
- PJ30_IOR_IN, PJ30_IOR_OUT,
- PJ29_IOR_IN, PJ29_IOR_OUT,
- PJ28_IOR_IN, PJ28_IOR_OUT,
- PJ27_IOR_IN, PJ27_IOR_OUT,
- PJ26_IOR_IN, PJ26_IOR_OUT,
- PJ25_IOR_IN, PJ25_IOR_OUT,
- PJ24_IOR_IN, PJ24_IOR_OUT,
- PJ23_IOR_IN, PJ23_IOR_OUT,
- PJ22_IOR_IN, PJ22_IOR_OUT,
- PJ21_IOR_IN, PJ21_IOR_OUT,
- PJ20_IOR_IN, PJ20_IOR_OUT,
- PJ19_IOR_IN, PJ19_IOR_OUT,
- PJ18_IOR_IN, PJ18_IOR_OUT,
- PJ17_IOR_IN, PJ17_IOR_OUT,
- PJ16_IOR_IN, PJ16_IOR_OUT,
- PJ15_IOR_IN, PJ15_IOR_OUT,
- PJ14_IOR_IN, PJ14_IOR_OUT,
- PJ13_IOR_IN, PJ13_IOR_OUT,
- PJ12_IOR_IN, PJ12_IOR_OUT,
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ31MD_0, PJ31MD_1,
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
-
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
-
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
-
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
-
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
-
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
-
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
-
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* IRQs */
- IRQ7_PG_MARK, IRQ6_PG_MARK, IRQ5_PG_MARK, IRQ4_PG_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PG_MARK, IRQ0_PG_MARK,
- IRQ7_PF_MARK, IRQ6_PF_MARK, IRQ5_PF_MARK, IRQ4_PF_MARK,
- IRQ3_PJ_MARK, IRQ2_PJ_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ1_PC_MARK, IRQ0_PC_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
- PINT7_PH_MARK, PINT6_PH_MARK, PINT5_PH_MARK, PINT4_PH_MARK,
- PINT3_PH_MARK, PINT2_PH_MARK, PINT1_PH_MARK, PINT0_PH_MARK,
- PINT7_PJ_MARK, PINT6_PJ_MARK, PINT5_PJ_MARK, PINT4_PJ_MARK,
- PINT3_PJ_MARK, PINT2_PJ_MARK, PINT1_PJ_MARK, PINT0_PJ_MARK,
-
- /* SD */
- SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, SD_CD_MARK,
-
- /* MMC */
- MMC_D0_MARK, MMC_D1_MARK, MMC_D2_MARK, MMC_D3_MARK,
- MMC_D4_MARK, MMC_D5_MARK, MMC_D6_MARK, MMC_D7_MARK,
- MMC_CLK_MARK, MMC_CMD_MARK, MMC_CD_MARK,
-
- /* PWM */
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
-
- /* IEBus */
- IERXD_MARK, IETXD_MARK,
-
- /* WDT */
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- WE3ICIOWRAHDQMUU_MARK,
- WE2ICIORDDQMUL_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, RXD0_MARK, TXD0_MARK,
- SCK1_MARK, RXD1_MARK, TXD1_MARK, RTS1_MARK, CTS1_MARK,
- SCK2_MARK, RXD2_MARK, TXD2_MARK,
- SCK3_MARK, RXD3_MARK, TXD3_MARK,
- SCK4_MARK, RXD4_MARK, TXD4_MARK,
- SCK5_MARK, RXD5_MARK, TXD5_MARK, RTS5_MARK, CTS5_MARK,
- SCK6_MARK, RXD6_MARK, TXD6_MARK,
- SCK7_MARK, RXD7_MARK, TXD7_MARK, RTS7_MARK, CTS7_MARK,
-
- /* RSPI */
- MISO0_PB20_MARK, MOSI0_PB19_MARK, SSL00_PB18_MARK, RSPCK0_PB17_MARK,
- MISO0_PJ19_MARK, MOSI0_PJ18_MARK, SSL00_PJ17_MARK, RSPCK0_PJ16_MARK,
- MISO1_MARK, MOSI1_MARK, SSL10_MARK, RSPCK1_MARK,
-
- /* IIC3 */
- SCL0_MARK, SDA0_MARK,
- SCL1_MARK, SDA1_MARK,
- SCL2_MARK, SDA2_MARK,
- SCL3_MARK, SDA3_MARK,
-
- /* SSI */
- SSISCK0_MARK, SSIWS0_MARK, SSITXD0_MARK, SSIRXD0_MARK,
- SSISCK1_MARK, SSIWS1_MARK, SSIDATA1_MARK,
- SSISCK2_MARK, SSIWS2_MARK, SSIDATA2_MARK,
- SSISCK3_MARK, SSIWS3_MARK, SSIDATA3_MARK,
- SSISCK4_MARK, SSIWS4_MARK, SSIDATA4_MARK,
- SSISCK5_MARK, SSIWS5_MARK, SSIDATA5_MARK,
- AUDIO_CLK_MARK,
- AUDIO_XOUT_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
- SPDIF_IN_PJ24_MARK, SPDIF_OUT_PJ25_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* CAN */
- CRX0_MARK, CTX0_MARK,
- CRX1_MARK, CTX1_MARK,
- CRX2_MARK, CTX2_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
- CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
- CRX1_PJ22_MARK, CTX1_PJ23_MARK,
- CRX2_PJ20_MARK, CTX2_PJ21_MARK,
- CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
- CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
-
- /* VDC */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA23_MARK, DV_DATA22_MARK, DV_DATA21_MARK, DV_DATA20_MARK,
- DV_DATA19_MARK, DV_DATA18_MARK, DV_DATA17_MARK, DV_DATA16_MARK,
- DV_DATA15_MARK, DV_DATA14_MARK, DV_DATA13_MARK, DV_DATA12_MARK,
- DV_DATA11_MARK, DV_DATA10_MARK, DV_DATA9_MARK, DV_DATA8_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK,
- LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK,
- LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK,
- LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK,
- LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK,
- LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK,
- LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK,
- LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK,
- LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK,
- LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK,
- LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK,
- LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK,
- LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK,
- LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK,
- LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK,
- LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK,
- LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK,
- LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_000, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_001),
- PINMUX_DATA(CTX2_MARK, PB22MD_010),
- PINMUX_DATA(IETXD_MARK, PB22MD_011),
- PINMUX_DATA(CS4_MARK, PB22MD_100),
-
- PINMUX_DATA(PB21_DATA, PB21MD_00, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_01),
- PINMUX_DATA(CRX2_MARK, PB21MD_10),
- PINMUX_DATA(IERXD_MARK, PB21MD_11),
-
- PINMUX_DATA(A20_MARK, PB20MD_001),
- PINMUX_DATA(A19_MARK, PB19MD_001),
- PINMUX_DATA(A18_MARK, PB18MD_001),
- PINMUX_DATA(A17_MARK, PB17MD_001),
- PINMUX_DATA(A16_MARK, PB16MD_001),
- PINMUX_DATA(A15_MARK, PB15MD_001),
- PINMUX_DATA(A14_MARK, PB14MD_001),
- PINMUX_DATA(A13_MARK, PB13MD_001),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_01),
- PINMUX_DATA(A2_MARK, PB2MD_01),
- PINMUX_DATA(A1_MARK, PB1MD_01),
-
- /* Port C */
- PINMUX_DATA(PC8_DATA, PC8MD_000),
- PINMUX_DATA(CS3_MARK, PC8MD_001),
- PINMUX_DATA(TXD7_MARK, PC8MD_010),
- PINMUX_DATA(CTX1_MARK, PC8MD_011),
- PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
-
- PINMUX_DATA(PC7_DATA, PC7MD_000),
- PINMUX_DATA(CKE_MARK, PC7MD_001),
- PINMUX_DATA(RXD7_MARK, PC7MD_010),
- PINMUX_DATA(CRX1_MARK, PC7MD_011),
- PINMUX_DATA(CRX0_CRX1_MARK, PC7MD_100),
- PINMUX_DATA(IRQ1_PC_MARK, PC7MD_101),
-
- PINMUX_DATA(PC6_DATA, PC6MD_000),
- PINMUX_DATA(CAS_MARK, PC6MD_001),
- PINMUX_DATA(SCK7_MARK, PC6MD_010),
- PINMUX_DATA(CTX0_MARK, PC6MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
-
- PINMUX_DATA(PC5_DATA, PC5MD_000),
- PINMUX_DATA(RAS_MARK, PC5MD_001),
- PINMUX_DATA(CRX0_MARK, PC5MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
- PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
-
- PINMUX_DATA(PC4_DATA, PC4MD_00),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_01),
- PINMUX_DATA(TXD6_MARK, PC4MD_10),
-
- PINMUX_DATA(PC3_DATA, PC3MD_00),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_01),
- PINMUX_DATA(RXD6_MARK, PC3MD_10),
-
- PINMUX_DATA(PC2_DATA, PC2MD_00),
- PINMUX_DATA(RDWR_MARK, PC2MD_01),
- PINMUX_DATA(SCK5_MARK, PC2MD_10),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
-
- PINMUX_DATA(PD13_DATA, PD13MD_00),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(PWM2F_MARK, PD13MD_10),
-
- PINMUX_DATA(PD12_DATA, PD12MD_00),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(PWM2E_MARK, PD12MD_10),
-
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE7_DATA, PE7MD_00),
- PINMUX_DATA(SDA3_MARK, PE7MD_01),
- PINMUX_DATA(RXD7_MARK, PE7MD_10),
-
- PINMUX_DATA(PE6_DATA, PE6MD_00),
- PINMUX_DATA(SCL3_MARK, PE6MD_01),
- PINMUX_DATA(RXD6_MARK, PE6MD_10),
-
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(RXD5_MARK, PE5MD_10),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_000),
- PINMUX_DATA(SDA1_MARK, PE3MD_001),
- PINMUX_DATA(TCLKD_MARK, PE3MD_010),
- PINMUX_DATA(ADTRG_MARK, PE3MD_011),
- PINMUX_DATA(DV_HSYNC_MARK, PE3MD_100),
-
- PINMUX_DATA(PE2_DATA, PE2MD_000),
- PINMUX_DATA(SCL1_MARK, PE2MD_001),
- PINMUX_DATA(TCLKD_MARK, PE2MD_010),
- PINMUX_DATA(IOIS16_MARK, PE2MD_011),
- PINMUX_DATA(DV_VSYNC_MARK, PE2MD_100),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(TCLKB_MARK, PE1MD_010),
- PINMUX_DATA(AUDIO_CLK_MARK, PE1MD_010),
- PINMUX_DATA(DV_CLK_MARK, PE1MD_100),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(TCLKA_MARK, PE0MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF23_DATA, PF23MD_000),
- PINMUX_DATA(SD_D2_MARK, PF23MD_001),
- PINMUX_DATA(TXD3_MARK, PF23MD_100),
- PINMUX_DATA(MMC_D2_MARK, PF23MD_101),
-
- PINMUX_DATA(PF22_DATA, PF22MD_000),
- PINMUX_DATA(SD_D3_MARK, PF22MD_001),
- PINMUX_DATA(RXD3_MARK, PF22MD_100),
- PINMUX_DATA(MMC_D3_MARK, PF22MD_101),
-
- PINMUX_DATA(PF21_DATA, PF21MD_000),
- PINMUX_DATA(SD_CMD_MARK, PF21MD_001),
- PINMUX_DATA(SCK3_MARK, PF21MD_100),
- PINMUX_DATA(MMC_CMD_MARK, PF21MD_101),
-
- PINMUX_DATA(PF20_DATA, PF20MD_000),
- PINMUX_DATA(SD_CLK_MARK, PF20MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF20MD_010),
- PINMUX_DATA(MMC_CLK_MARK, PF20MD_101),
-
- PINMUX_DATA(PF19_DATA, PF19MD_000),
- PINMUX_DATA(SD_D0_MARK, PF19MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF19MD_010),
- PINMUX_DATA(IRQ7_PF_MARK, PF19MD_100),
- PINMUX_DATA(MMC_D0_MARK, PF19MD_101),
-
- PINMUX_DATA(PF18_DATA, PF18MD_000),
- PINMUX_DATA(SD_D1_MARK, PF18MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF18MD_010),
- PINMUX_DATA(IRQ6_PF_MARK, PF18MD_100),
- PINMUX_DATA(MMC_D1_MARK, PF18MD_101),
-
- PINMUX_DATA(PF17_DATA, PF17MD_000),
- PINMUX_DATA(SD_WP_MARK, PF17MD_001),
- PINMUX_DATA(FRB_MARK, PF17MD_011),
- PINMUX_DATA(IRQ5_PF_MARK, PF17MD_100),
-
- PINMUX_DATA(PF16_DATA, PF16MD_000),
- PINMUX_DATA(SD_CD_MARK, PF16MD_001),
- PINMUX_DATA(FCE_MARK, PF16MD_011),
- PINMUX_DATA(IRQ4_PF_MARK, PF16MD_100),
- PINMUX_DATA(MMC_CD_MARK, PF16MD_101),
-
- PINMUX_DATA(PF15_DATA, PF15MD_000),
- PINMUX_DATA(A0_MARK, PF15MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF15MD_010),
- PINMUX_DATA(WDTOVF_MARK, PF15MD_011),
- PINMUX_DATA(TXD2_MARK, PF15MD_100),
-
- PINMUX_DATA(PF14_DATA, PF14MD_000),
- PINMUX_DATA(A25_MARK, PF14MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF14MD_010),
- PINMUX_DATA(RXD2_MARK, PF14MD_100),
-
- PINMUX_DATA(PF13_DATA, PF13MD_000),
- PINMUX_DATA(A24_MARK, PF13MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF13MD_010),
- PINMUX_DATA(SCK2_MARK, PF13MD_100),
-
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(SSIDATA1_MARK, PF12MD_010),
- PINMUX_DATA(DV_DATA12_MARK, PF12MD_011),
- PINMUX_DATA(TXD1_MARK, PF12MD_100),
- PINMUX_DATA(MMC_D7_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(SSIWS1_MARK, PF11MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF11MD_011),
- PINMUX_DATA(RXD1_MARK, PF11MD_100),
- PINMUX_DATA(MMC_D6_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(CS1_MARK, PF10MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF10MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF10MD_011),
- PINMUX_DATA(SCK1_MARK, PF10MD_100),
- PINMUX_DATA(MMC_D5_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(BS_MARK, PF9MD_001),
- PINMUX_DATA(DV_DATA0_MARK, PF9MD_011),
- PINMUX_DATA(SCK0_MARK, PF9MD_100),
- PINMUX_DATA(MMC_D4_MARK, PF9MD_101),
- PINMUX_DATA(RTS1_MARK, PF9MD_110),
-
- PINMUX_DATA(PF8_DATA, PF8MD_000),
- PINMUX_DATA(A23_MARK, PF8MD_001),
- PINMUX_DATA(TXD0_MARK, PF8MD_100),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(SSIRXD0_MARK, PF7MD_010),
- PINMUX_DATA(RXD0_MARK, PF7MD_100),
- PINMUX_DATA(CTS1_MARK, PF7MD_110),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CE2A_MARK, PF6MD_001),
- PINMUX_DATA(SSITXD0_MARK, PF6MD_010),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(SSIWS0_MARK, PF5MD_010),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF4MD_001),
- PINMUX_DATA(SSISCK0_MARK, PF4MD_010),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(CS2_MARK, PF3MD_001),
- PINMUX_DATA(MISO1_MARK, PF3MD_011),
- PINMUX_DATA(TIOC4D_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(WAIT_MARK, PF2MD_001),
- PINMUX_DATA(MOSI1_MARK, PF2MD_011),
- PINMUX_DATA(TIOC4C_MARK, PF2MD_100),
- PINMUX_DATA(TEND0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BACK_MARK, PF1MD_001),
- PINMUX_DATA(SSL10_MARK, PF1MD_011),
- PINMUX_DATA(TIOC4B_MARK, PF1MD_100),
- PINMUX_DATA(DACK0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(BREQ_MARK, PF0MD_001),
- PINMUX_DATA(RSPCK1_MARK, PF0MD_011),
- PINMUX_DATA(TIOC4A_MARK, PF0MD_100),
- PINMUX_DATA(DREQ0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG27_DATA, PG27MD_00),
- PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11),
- PINMUX_DATA(LCD_DE_MARK, PG27MD_11),
-
- PINMUX_DATA(PG26_DATA, PG26MD_00),
- PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10),
- PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10),
-
- PINMUX_DATA(PG25_DATA, PG25MD_00),
- PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10),
- PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10),
-
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(LCD_CLK_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_000),
- PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011),
- PINMUX_DATA(TXD5_MARK, PG23MD_100),
-
- PINMUX_DATA(PG22_DATA, PG22MD_000),
- PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011),
- PINMUX_DATA(RXD5_MARK, PG22MD_100),
-
- PINMUX_DATA(PG21_DATA, PG21MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PG21MD_001),
- PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011),
- PINMUX_DATA(TXD4_MARK, PG21MD_100),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PG20MD_001),
- PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011),
- PINMUX_DATA(RXD4_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PG19MD_001),
- PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010),
- PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011),
- PINMUX_DATA(SCK5_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PG18MD_001),
- PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010),
- PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011),
- PINMUX_DATA(SCK4_MARK, PG18MD_100),
-
-// TODO hardware manual has PG17 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG17_DATA, PG17MD_00),
- PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01),
- PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10),
-
-// TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG16_DATA, PG16MD_00),
- PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01),
- PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10),
-
- PINMUX_DATA(PG15_DATA, PG15MD_00),
- PINMUX_DATA(D31_MARK, PG15MD_01),
- PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG15MD_11),
-
- PINMUX_DATA(PG14_DATA, PG14MD_00),
- PINMUX_DATA(D30_MARK, PG14MD_01),
- PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG14MD_11),
-
- PINMUX_DATA(PG13_DATA, PG13MD_00),
- PINMUX_DATA(D29_MARK, PG13MD_01),
- PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG13MD_11),
-
- PINMUX_DATA(PG12_DATA, PG12MD_00),
- PINMUX_DATA(D28_MARK, PG12MD_01),
- PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG12MD_11),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(D27_MARK, PG11MD_001),
- PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010),
- PINMUX_DATA(PINT3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TIOC3D_MARK, PG11MD_100),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(D26_MARK, PG10MD_001),
- PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010),
- PINMUX_DATA(PINT2_PG_MARK, PG10MD_011),
- PINMUX_DATA(TIOC3C_MARK, PG10MD_100),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(D25_MARK, PG9MD_001),
- PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010),
- PINMUX_DATA(PINT1_PG_MARK, PG9MD_011),
- PINMUX_DATA(TIOC3B_MARK, PG9MD_100),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(D24_MARK, PG8MD_001),
- PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG8MD_011),
- PINMUX_DATA(TIOC3A_MARK, PG8MD_100),
-
- PINMUX_DATA(PG7_DATA, PG7MD_000),
- PINMUX_DATA(D23_MARK, PG7MD_001),
- PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010),
- PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011),
- PINMUX_DATA(TIOC2B_MARK, PG7MD_100),
-
- PINMUX_DATA(PG6_DATA, PG6MD_000),
- PINMUX_DATA(D22_MARK, PG6MD_001),
- PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010),
- PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011),
- PINMUX_DATA(TIOC2A_MARK, PG6MD_100),
-
- PINMUX_DATA(PG5_DATA, PG5MD_000),
- PINMUX_DATA(D21_MARK, PG5MD_001),
- PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010),
- PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011),
- PINMUX_DATA(TIOC1B_MARK, PG5MD_100),
-
- PINMUX_DATA(PG4_DATA, PG4MD_000),
- PINMUX_DATA(D20_MARK, PG4MD_001),
- PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010),
- PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011),
- PINMUX_DATA(TIOC1A_MARK, PG4MD_100),
-
- PINMUX_DATA(PG3_DATA, PG3MD_000),
- PINMUX_DATA(D19_MARK, PG3MD_001),
- PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011),
- PINMUX_DATA(TIOC0D_MARK, PG3MD_100),
-
- PINMUX_DATA(PG2_DATA, PG2MD_000),
- PINMUX_DATA(D18_MARK, PG2MD_001),
- PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011),
- PINMUX_DATA(TIOC0C_MARK, PG2MD_100),
-
- PINMUX_DATA(PG1_DATA, PG1MD_000),
- PINMUX_DATA(D17_MARK, PG1MD_001),
- PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010),
- PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011),
- PINMUX_DATA(TIOC0B_MARK, PG1MD_100),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(D16_MARK, PG0MD_001),
- PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010),
- PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011),
- PINMUX_DATA(TIOC0A_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_00),
- PINMUX_DATA(PHAN7_MARK, PH7MD_01),
- PINMUX_DATA(PINT7_PH_MARK, PH7MD_10),
-
- PINMUX_DATA(PH6_DATA, PH6MD_00),
- PINMUX_DATA(PHAN6_MARK, PH6MD_01),
- PINMUX_DATA(PINT6_PH_MARK, PH6MD_10),
-
- PINMUX_DATA(PH5_DATA, PH5MD_00),
- PINMUX_DATA(PHAN5_MARK, PH5MD_01),
- PINMUX_DATA(PINT5_PH_MARK, PH5MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PH5MD_11),
-
- PINMUX_DATA(PH4_DATA, PH4MD_00),
- PINMUX_DATA(PHAN4_MARK, PH4MD_01),
- PINMUX_DATA(PINT4_PH_MARK, PH4MD_10),
-
- PINMUX_DATA(PH3_DATA, PH3MD_00),
- PINMUX_DATA(PHAN3_MARK, PH3MD_01),
- PINMUX_DATA(PINT3_PH_MARK, PH3MD_10),
-
- PINMUX_DATA(PH2_DATA, PH2MD_00),
- PINMUX_DATA(PHAN2_MARK, PH2MD_01),
- PINMUX_DATA(PINT2_PH_MARK, PH2MD_10),
-
- PINMUX_DATA(PH1_DATA, PH1MD_00),
- PINMUX_DATA(PHAN1_MARK, PH1MD_01),
- PINMUX_DATA(PINT1_PH_MARK, PH1MD_10),
-
- PINMUX_DATA(PH0_DATA, PH0MD_00),
- PINMUX_DATA(PHAN0_MARK, PH0MD_01),
- PINMUX_DATA(PINT0_PH_MARK, PH0MD_10),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ31_DATA, PJ31MD_0),
- PINMUX_DATA(DV_CLK_MARK, PJ31MD_1),
-
- PINMUX_DATA(PJ30_DATA, PJ30MD_000),
- PINMUX_DATA(SSIDATA5_MARK, PJ30MD_010),
- PINMUX_DATA(TIOC2B_MARK, PJ30MD_100),
- PINMUX_DATA(IETXD_MARK, PJ30MD_101),
-
- PINMUX_DATA(PJ29_DATA, PJ29MD_000),
- PINMUX_DATA(SSIWS5_MARK, PJ29MD_010),
- PINMUX_DATA(TIOC2A_MARK, PJ29MD_100),
- PINMUX_DATA(IERXD_MARK, PJ29MD_101),
-
- PINMUX_DATA(PJ28_DATA, PJ28MD_000),
- PINMUX_DATA(SSISCK5_MARK, PJ28MD_010),
- PINMUX_DATA(TIOC1B_MARK, PJ28MD_100),
- PINMUX_DATA(RTS7_MARK, PJ28MD_101),
-
- PINMUX_DATA(PJ27_DATA, PJ27MD_000),
- PINMUX_DATA(TIOC1A_MARK, PJ27MD_100),
- PINMUX_DATA(CTS7_MARK, PJ27MD_101),
-
- PINMUX_DATA(PJ26_DATA, PJ26MD_000),
- PINMUX_DATA(SSIDATA4_MARK, PJ26MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ26MD_011),
- PINMUX_DATA(TXD7_MARK, PJ26MD_101),
-
- PINMUX_DATA(PJ25_DATA, PJ25MD_000),
- PINMUX_DATA(SSIWS4_MARK, PJ25MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ25MD_011),
- PINMUX_DATA(SPDIF_OUT_MARK, PJ25MD_100),
- PINMUX_DATA(RXD7_MARK, PJ25MD_101),
-
- PINMUX_DATA(PJ24_DATA, PJ24MD_000),
- PINMUX_DATA(SSISCK4_MARK, PJ24MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ24MD_011),
- PINMUX_DATA(SPDIF_IN_MARK, PJ24MD_100),
- PINMUX_DATA(SCK7_MARK, PJ24MD_101),
-
- PINMUX_DATA(PJ23_DATA, PJ23MD_000),
- PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001),
- PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
- PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
- PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
- PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
-
- PINMUX_DATA(PJ22_DATA, PJ22MD_000),
- PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
- PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
- PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
- PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
- PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
-
- PINMUX_DATA(PJ21_DATA, PJ21MD_000),
- PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
- PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
- PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
- PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
-
- PINMUX_DATA(PJ20_DATA, PJ20MD_000),
- PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
- PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
- PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
- PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
-
- PINMUX_DATA(PJ19_DATA, PJ19MD_000),
- PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
- PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010),
- PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011),
- PINMUX_DATA(TIOC0D_MARK, PJ19MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101),
- PINMUX_DATA(AUDIO_XOUT_MARK, PJ19MD_110),
-
- PINMUX_DATA(PJ18_DATA, PJ18MD_000),
- PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001),
- PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010),
- PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011),
- PINMUX_DATA(TIOC0C_MARK, PJ18MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101),
-
- PINMUX_DATA(PJ17_DATA, PJ17MD_000),
- PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001),
- PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010),
- PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011),
- PINMUX_DATA(TIOC0B_MARK, PJ17MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101),
-
- PINMUX_DATA(PJ16_DATA, PJ16MD_000),
- PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001),
- PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010),
- PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011),
- PINMUX_DATA(TIOC0A_MARK, PJ16MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101),
-
- PINMUX_DATA(PJ15_DATA, PJ15MD_000),
- PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001),
- PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010),
- PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011),
- PINMUX_DATA(PWM2H_MARK, PJ15MD_100),
- PINMUX_DATA(TXD7_MARK, PJ15MD_101),
-
- PINMUX_DATA(PJ14_DATA, PJ14MD_000),
- PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001),
- PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010),
- PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011),
- PINMUX_DATA(PWM2G_MARK, PJ14MD_100),
- PINMUX_DATA(TXD6_MARK, PJ14MD_101),
-
- PINMUX_DATA(PJ13_DATA, PJ13MD_000),
- PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001),
- PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010),
- PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011),
- PINMUX_DATA(PWM2F_MARK, PJ13MD_100),
- PINMUX_DATA(TXD5_MARK, PJ13MD_101),
-
- PINMUX_DATA(PJ12_DATA, PJ12MD_000),
- PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001),
- PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010),
- PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011),
- PINMUX_DATA(PWM2E_MARK, PJ12MD_100),
- PINMUX_DATA(SCK7_MARK, PJ12MD_101),
-
- PINMUX_DATA(PJ11_DATA, PJ11MD_000),
- PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001),
- PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010),
- PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011),
- PINMUX_DATA(PWM2D_MARK, PJ11MD_100),
- PINMUX_DATA(SCK6_MARK, PJ11MD_101),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_000),
- PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001),
- PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010),
- PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011),
- PINMUX_DATA(PWM2C_MARK, PJ10MD_100),
- PINMUX_DATA(SCK5_MARK, PJ10MD_101),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_000),
- PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001),
- PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010),
- PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011),
- PINMUX_DATA(PWM2B_MARK, PJ9MD_100),
- PINMUX_DATA(RTS5_MARK, PJ9MD_101),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_000),
- PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001),
- PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010),
- PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011),
- PINMUX_DATA(PWM2A_MARK, PJ8MD_100),
- PINMUX_DATA(CTS5_MARK, PJ8MD_101),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001),
- PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010),
- PINMUX_DATA(SD_D2_MARK, PJ7MD_011),
- PINMUX_DATA(PWM1H_MARK, PJ7MD_100),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001),
- PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010),
- PINMUX_DATA(SD_D3_MARK, PJ6MD_011),
- PINMUX_DATA(PWM1G_MARK, PJ6MD_100),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001),
- PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010),
- PINMUX_DATA(SD_CMD_MARK, PJ5MD_011),
- PINMUX_DATA(PWM1F_MARK, PJ5MD_100),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001),
- PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010),
- PINMUX_DATA(SD_CLK_MARK, PJ4MD_011),
- PINMUX_DATA(PWM1E_MARK, PJ4MD_100),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_000),
- PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001),
- PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010),
- PINMUX_DATA(SD_D0_MARK, PJ3MD_011),
- PINMUX_DATA(PWM1D_MARK, PJ3MD_100),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001),
- PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010),
- PINMUX_DATA(SD_D1_MARK, PJ2MD_011),
- PINMUX_DATA(PWM1C_MARK, PJ2MD_100),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001),
- PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010),
- PINMUX_DATA(SD_WP_MARK, PJ1MD_011),
- PINMUX_DATA(PWM1B_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001),
- PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010),
- PINMUX_DATA(SD_CD_MARK, PJ0MD_011),
- PINMUX_DATA(PWM1A_MARK, PJ0MD_100),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG27),
- PINMUX_GPIO(PG26),
- PINMUX_GPIO(PG25),
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ31),
- PINMUX_GPIO(PJ30),
- PINMUX_GPIO(PJ29),
- PINMUX_GPIO(PJ28),
- PINMUX_GPIO(PJ27),
- PINMUX_GPIO(PJ26),
- PINMUX_GPIO(PJ25),
- PINMUX_GPIO(PJ24),
- PINMUX_GPIO(PJ23),
- PINMUX_GPIO(PJ22),
- PINMUX_GPIO(PJ21),
- PINMUX_GPIO(PJ20),
- PINMUX_GPIO(PJ19),
- PINMUX_GPIO(PJ18),
- PINMUX_GPIO(PJ17),
- PINMUX_GPIO(PJ16),
- PINMUX_GPIO(PJ15),
- PINMUX_GPIO(PJ14),
- PINMUX_GPIO(PJ13),
- PINMUX_GPIO(PJ12),
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(IRQ7_PG),
- GPIO_FN(IRQ6_PG),
- GPIO_FN(IRQ5_PG),
- GPIO_FN(IRQ4_PG),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PG),
- GPIO_FN(IRQ0_PG),
- GPIO_FN(IRQ7_PF),
- GPIO_FN(IRQ6_PF),
- GPIO_FN(IRQ5_PF),
- GPIO_FN(IRQ4_PF),
- GPIO_FN(IRQ3_PJ),
- GPIO_FN(IRQ2_PJ),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ1_PC),
- GPIO_FN(IRQ0_PC),
-
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
- GPIO_FN(PINT0_PG),
- GPIO_FN(PINT7_PH),
- GPIO_FN(PINT6_PH),
- GPIO_FN(PINT5_PH),
- GPIO_FN(PINT4_PH),
- GPIO_FN(PINT3_PH),
- GPIO_FN(PINT2_PH),
- GPIO_FN(PINT1_PH),
- GPIO_FN(PINT0_PH),
- GPIO_FN(PINT7_PJ),
- GPIO_FN(PINT6_PJ),
- GPIO_FN(PINT5_PJ),
- GPIO_FN(PINT4_PJ),
- GPIO_FN(PINT3_PJ),
- GPIO_FN(PINT2_PJ),
- GPIO_FN(PINT1_PJ),
- GPIO_FN(PINT0_PJ),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX2),
- GPIO_FN(CRX2),
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CRX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0_CRX1),
- GPIO_FN(CTX0_CTX1_CTX2),
- GPIO_FN(CRX0_CRX1_CRX2),
- GPIO_FN(CTX2_PJ21),
- GPIO_FN(CRX2_PJ20),
- GPIO_FN(CTX1_PJ23),
- GPIO_FN(CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_PJ23),
- GPIO_FN(CRX0_CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_CTX2_PJ21),
- GPIO_FN(CRX0_CRX1_CRX2_PJ20),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(WE3ICIOWRAHDQMUU),
- GPIO_FN(WE2ICIORDDQMUL),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(SCK0),
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK1),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
- GPIO_FN(SCK2),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK4),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(SCK5),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(RTS5),
- GPIO_FN(CTS5),
- GPIO_FN(SCK6),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(SCK7),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS7),
- GPIO_FN(CTS7),
-
- /* RSPI */
- GPIO_FN(RSPCK0_PJ16),
- GPIO_FN(SSL00_PJ17),
- GPIO_FN(MOSI0_PJ18),
- GPIO_FN(MISO0_PJ19),
- GPIO_FN(RSPCK0_PB17),
- GPIO_FN(SSL00_PB18),
- GPIO_FN(MOSI0_PB19),
- GPIO_FN(MISO0_PB20),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(AUDIO_XOUT),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA23),
- GPIO_FN(DV_DATA22),
- GPIO_FN(DV_DATA21),
- GPIO_FN(DV_DATA20),
- GPIO_FN(DV_DATA19),
- GPIO_FN(DV_DATA18),
- GPIO_FN(DV_DATA17),
- GPIO_FN(DV_DATA16),
- GPIO_FN(DV_DATA15),
- GPIO_FN(DV_DATA14),
- GPIO_FN(DV_DATA13),
- GPIO_FN(DV_DATA12),
- GPIO_FN(DV_DATA11),
- GPIO_FN(DV_DATA10),
- GPIO_FN(DV_DATA9),
- GPIO_FN(DV_DATA8),
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA23_PG23),
- GPIO_FN(LCD_DATA22_PG22),
- GPIO_FN(LCD_DATA21_PG21),
- GPIO_FN(LCD_DATA20_PG20),
- GPIO_FN(LCD_DATA19_PG19),
- GPIO_FN(LCD_DATA18_PG18),
- GPIO_FN(LCD_DATA17_PG17),
- GPIO_FN(LCD_DATA16_PG16),
- GPIO_FN(LCD_DATA15_PG15),
- GPIO_FN(LCD_DATA14_PG14),
- GPIO_FN(LCD_DATA13_PG13),
- GPIO_FN(LCD_DATA12_PG12),
- GPIO_FN(LCD_DATA11_PG11),
- GPIO_FN(LCD_DATA10_PG10),
- GPIO_FN(LCD_DATA9_PG9),
- GPIO_FN(LCD_DATA8_PG8),
- GPIO_FN(LCD_DATA7_PG7),
- GPIO_FN(LCD_DATA6_PG6),
- GPIO_FN(LCD_DATA5_PG5),
- GPIO_FN(LCD_DATA4_PG4),
- GPIO_FN(LCD_DATA3_PG3),
- GPIO_FN(LCD_DATA2_PG2),
- GPIO_FN(LCD_DATA1_PG1),
- GPIO_FN(LCD_DATA0_PG0),
-
- GPIO_FN(LCD_DATA23_PJ23),
- GPIO_FN(LCD_DATA22_PJ22),
- GPIO_FN(LCD_DATA21_PJ21),
- GPIO_FN(LCD_DATA20_PJ20),
- GPIO_FN(LCD_DATA19_PJ19),
- GPIO_FN(LCD_DATA18_PJ18),
- GPIO_FN(LCD_DATA17_PJ17),
- GPIO_FN(LCD_DATA16_PJ16),
- GPIO_FN(LCD_DATA15_PJ15),
- GPIO_FN(LCD_DATA14_PJ14),
- GPIO_FN(LCD_DATA13_PJ13),
- GPIO_FN(LCD_DATA12_PJ12),
- GPIO_FN(LCD_DATA11_PJ11),
- GPIO_FN(LCD_DATA10_PJ10),
- GPIO_FN(LCD_DATA9_PJ9),
- GPIO_FN(LCD_DATA8_PJ8),
- GPIO_FN(LCD_DATA7_PJ7),
- GPIO_FN(LCD_DATA6_PJ6),
- GPIO_FN(LCD_DATA5_PJ5),
- GPIO_FN(LCD_DATA4_PJ4),
- GPIO_FN(LCD_DATA3_PJ3),
- GPIO_FN(LCD_DATA2_PJ2),
- GPIO_FN(LCD_DATA1_PJ1),
- GPIO_FN(LCD_DATA0_PJ0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- /* "name" addr register_size Field_Width */
-
- /* where Field_Width is 1 for single mode registers or 4 for up to 16
- * mode registers and modes are described in assending order [0..15]
- */
-
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-7, 1, -7, 1),
- GROUP(
- /* RESERVED [7] */
- PA1_IN, PA1_OUT,
- /* RESERVED [7] */
- PA0_IN, PA0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG("PECR1", 0xfffe388c, 16, 4, GROUP(
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG("PFCR6", 0xfffe38a2, 16, 4, GROUP(
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR5", 0xfffe38a4, 16, 4, GROUP(
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR4", 0xfffe38a6, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PFIOR1", 0xfffe38b0, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG("PGCR6", 0xfffe38c2, 16, 4, GROUP(
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR0", 0xfffe38ce, 16, 4, GROUP(
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGIOR1", 0xfffe38d0, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG27_IN, PG27_OUT,
- PG26_IN, PG26_OUT,
- PG25_IN, PG25_OUT,
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR7", 0xfffe3900, 16, 4, GROUP(
- PJ31MD_0, PJ31MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR6", 0xfffe3902, 16, 4, GROUP(
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR5", 0xfffe3904, 16, 4, GROUP(
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR4", 0xfffe3906, 16, 4, GROUP(
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR3", 0xfffe3908, 16, 4, GROUP(
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJIOR1", 0xfffe3910, 16, 1, GROUP(
- PJ31_IN, PJ31_OUT,
- PJ30_IN, PJ30_OUT,
- PJ29_IN, PJ29_OUT,
- PJ28_IN, PJ28_OUT,
- PJ27_IN, PJ27_OUT,
- PJ26_IN, PJ26_OUT,
- PJ25_IN, PJ25_OUT,
- PJ24_IN, PJ24_OUT,
- PJ23_IN, PJ23_OUT,
- PJ22_IN, PJ22_OUT,
- PJ21_IN, PJ21_OUT,
- PJ20_IN, PJ20_OUT,
- PJ19_IN, PJ19_OUT,
- PJ18_IN, PJ18_OUT,
- PJ17_IN, PJ17_OUT,
- PJ16_IN, PJ16_OUT ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- PJ15_IN, PJ15_OUT,
- PJ14_IN, PJ14_OUT,
- PJ13_IN, PJ13_OUT,
- PJ12_IN, PJ12_OUT,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR1", 0xfffe38b4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0,
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
-
- { PINMUX_DATA_REG("PJDR1", 0xfffe3914, 16, GROUP(
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
-
- { }
-};
-
-const struct sh_pfc_soc_info sh7269_pinmux_info = {
- .name = "sh7269_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7720.c b/drivers/pinctrl/renesas/pfc-sh7720.c
deleted file mode 100644
index 6eedcc5bbb4d67..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7720.c
+++ /dev/null
@@ -1,1201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7720.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, PTL3_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTP4_DATA, PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN, PTL3_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTP4_IN, PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS4_IN, PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF0_OUT,
- PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT, PTL3_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTP4_OUT, PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS4_OUT, PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN, PTL3_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTP4_FN, PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS4_FN, PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV4_FN, PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
-
- PSELA_1_0_00, PSELA_1_0_01, PSELA_1_0_10,
- PSELA_3_2_00, PSELA_3_2_01, PSELA_3_2_10, PSELA_3_2_11,
- PSELA_5_4_00, PSELA_5_4_01, PSELA_5_4_10, PSELA_5_4_11,
- PSELA_7_6_00, PSELA_7_6_01, PSELA_7_6_10,
- PSELA_9_8_00, PSELA_9_8_01, PSELA_9_8_10,
- PSELA_11_10_00, PSELA_11_10_01, PSELA_11_10_10,
- PSELA_13_12_00, PSELA_13_12_10,
- PSELA_15_14_00, PSELA_15_14_10,
- PSELB_9_8_00, PSELB_9_8_11,
- PSELB_11_10_00, PSELB_11_10_01, PSELB_11_10_10, PSELB_11_10_11,
- PSELB_13_12_00, PSELB_13_12_01, PSELB_13_12_10, PSELB_13_12_11,
- PSELB_15_14_00, PSELB_15_14_11,
- PSELC_9_8_00, PSELC_9_8_10,
- PSELC_11_10_00, PSELC_11_10_10,
- PSELC_13_12_00, PSELC_13_12_01, PSELC_13_12_10,
- PSELC_15_14_00, PSELC_15_14_01, PSELC_15_14_10,
- PSELD_1_0_00, PSELD_1_0_10,
- PSELD_11_10_00, PSELD_11_10_01,
- PSELD_15_14_00, PSELD_15_14_01, PSELD_15_14_10,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, RAS_MARK, CAS_MARK, CKE_MARK,
- CS5B_CE1A_MARK, CS6B_CE1B_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, A20_MARK, A19_MARK, A0_MARK,
- REFOUT_MARK, IRQOUT_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK,
- LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK,
- LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK,
- LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK,
- LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- LCD_CL1_MARK, LCD_CL2_MARK,
- LCD_DON_MARK, LCD_FLM_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK,
- AFE_RXIN_MARK, AFE_RDET_MARK,
- AFE_FS_MARK, AFE_TXOUT_MARK,
- AFE_SCLK_MARK, AFE_RLYCNT_MARK,
- AFE_HC1_MARK,
- IIC_SCL_MARK, IIC_SDA_MARK,
- DA1_MARK, DA0_MARK,
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
- USB1D_RCV_MARK, USB1D_TXSE0_MARK,
- USB1D_TXDPLS_MARK, USB1D_DMNS_MARK,
- USB1D_DPLS_MARK, USB1D_SPEED_MARK,
- USB1D_TXENL_MARK,
- USB2_PWR_EN_MARK, USB1_PWR_EN_USBF_UPLUP_MARK, USB1D_SUSPEND_MARK,
- IRQ5_MARK, IRQ4_MARK,
- IRQ3_IRL3_MARK, IRQ2_IRL2_MARK,
- IRQ1_IRL1_MARK, IRQ0_IRL0_MARK,
- PCC_REG_MARK, PCC_DRV_MARK,
- PCC_BVD2_MARK, PCC_BVD1_MARK,
- PCC_CD2_MARK, PCC_CD1_MARK,
- PCC_RESET_MARK, PCC_RDY_MARK,
- PCC_VS2_MARK, PCC_VS1_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK, ASEBRKAK_MARK, TRST_MARK,
- TMS_MARK, TDO_MARK, TDI_MARK, TCK_MARK,
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, TEND0_MARK,
- SIOF0_SYNC_MARK, SIOF0_MCLK_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF0_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_MCLK_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIOF1_SCK_MARK,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- TPU_TO1_MARK, TPU_TO0_MARK,
- TPU_TI3B_MARK, TPU_TI3A_MARK,
- TPU_TI2B_MARK, TPU_TI2A_MARK,
- TPU_TO3_MARK, TPU_TO2_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- MMC_DAT_MARK, MMC_CMD_MARK,
- MMC_CLK_MARK, MMC_VDDON_MARK,
- MMC_ODMOD_MARK,
- STATUS0_MARK, STATUS1_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE6_DATA, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF6_DATA, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTP GPIO */
- PINMUX_DATA(PTP4_DATA, PTP4_IN, PTP4_OUT),
- PINMUX_DATA(PTP3_DATA, PTP3_IN, PTP3_OUT),
- PINMUX_DATA(PTP2_DATA, PTP2_IN, PTP2_OUT),
- PINMUX_DATA(PTP1_DATA, PTP1_IN, PTP1_OUT),
- PINMUX_DATA(PTP0_DATA, PTP0_IN, PTP0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PTA7_FN),
- PINMUX_DATA(D22_MARK, PTA6_FN),
- PINMUX_DATA(D21_MARK, PTA5_FN),
- PINMUX_DATA(D20_MARK, PTA4_FN),
- PINMUX_DATA(D19_MARK, PTA3_FN),
- PINMUX_DATA(D18_MARK, PTA2_FN),
- PINMUX_DATA(D17_MARK, PTA1_FN),
- PINMUX_DATA(D16_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PTB2_FN),
- PINMUX_DATA(D25_MARK, PTB1_FN),
- PINMUX_DATA(D24_MARK, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCD_DATA7_MARK, PTC7_FN),
- PINMUX_DATA(LCD_DATA6_MARK, PTC6_FN),
- PINMUX_DATA(LCD_DATA5_MARK, PTC5_FN),
- PINMUX_DATA(LCD_DATA4_MARK, PTC4_FN),
- PINMUX_DATA(LCD_DATA3_MARK, PTC3_FN),
- PINMUX_DATA(LCD_DATA2_MARK, PTC2_FN),
- PINMUX_DATA(LCD_DATA1_MARK, PTC1_FN),
- PINMUX_DATA(LCD_DATA0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCD_DATA15_MARK, PTD7_FN),
- PINMUX_DATA(LCD_DATA14_MARK, PTD6_FN),
- PINMUX_DATA(LCD_DATA13_MARK, PTD5_FN),
- PINMUX_DATA(LCD_DATA12_MARK, PTD4_FN),
- PINMUX_DATA(LCD_DATA11_MARK, PTD3_FN),
- PINMUX_DATA(LCD_DATA10_MARK, PTD2_FN),
- PINMUX_DATA(LCD_DATA9_MARK, PTD1_FN),
- PINMUX_DATA(LCD_DATA8_MARK, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(IIC_SCL_MARK, PSELB_9_8_00, PTE6_FN),
- PINMUX_DATA(AFE_RXIN_MARK, PSELB_9_8_11, PTE6_FN),
- PINMUX_DATA(IIC_SDA_MARK, PSELB_9_8_00, PTE5_FN),
- PINMUX_DATA(AFE_RDET_MARK, PSELB_9_8_11, PTE5_FN),
- PINMUX_DATA(LCD_M_DISP_MARK, PTE4_FN),
- PINMUX_DATA(LCD_CL1_MARK, PTE3_FN),
- PINMUX_DATA(LCD_CL2_MARK, PTE2_FN),
- PINMUX_DATA(LCD_DON_MARK, PTE1_FN),
- PINMUX_DATA(LCD_FLM_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(DA1_MARK, PTF6_FN),
- PINMUX_DATA(DA0_MARK, PTF5_FN),
- PINMUX_DATA(AN3_MARK, PTF4_FN),
- PINMUX_DATA(AN2_MARK, PTF3_FN),
- PINMUX_DATA(AN1_MARK, PTF2_FN),
- PINMUX_DATA(AN0_MARK, PTF1_FN),
- PINMUX_DATA(ADTRG_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(USB1D_RCV_MARK, PSELA_3_2_00, PTG6_FN),
- PINMUX_DATA(AFE_FS_MARK, PSELA_3_2_01, PTG6_FN),
- PINMUX_DATA(PCC_REG_MARK, PSELA_3_2_10, PTG6_FN),
- PINMUX_DATA(IRQ5_MARK, PSELA_3_2_11, PTG6_FN),
- PINMUX_DATA(USB1D_TXSE0_MARK, PSELA_5_4_00, PTG5_FN),
- PINMUX_DATA(AFE_TXOUT_MARK, PSELA_5_4_01, PTG5_FN),
- PINMUX_DATA(PCC_DRV_MARK, PSELA_5_4_10, PTG5_FN),
- PINMUX_DATA(IRQ4_MARK, PSELA_5_4_11, PTG5_FN),
- PINMUX_DATA(USB1D_TXDPLS_MARK, PSELA_7_6_00, PTG4_FN),
- PINMUX_DATA(AFE_SCLK_MARK, PSELA_7_6_01, PTG4_FN),
- PINMUX_DATA(IOIS16_MARK, PSELA_7_6_10, PTG4_FN),
- PINMUX_DATA(USB1D_DMNS_MARK, PSELA_9_8_00, PTG3_FN),
- PINMUX_DATA(AFE_RLYCNT_MARK, PSELA_9_8_01, PTG3_FN),
- PINMUX_DATA(PCC_BVD2_MARK, PSELA_9_8_10, PTG3_FN),
- PINMUX_DATA(USB1D_DPLS_MARK, PSELA_11_10_00, PTG2_FN),
- PINMUX_DATA(AFE_HC1_MARK, PSELA_11_10_01, PTG2_FN),
- PINMUX_DATA(PCC_BVD1_MARK, PSELA_11_10_10, PTG2_FN),
- PINMUX_DATA(USB1D_SPEED_MARK, PSELA_13_12_00, PTG1_FN),
- PINMUX_DATA(PCC_CD2_MARK, PSELA_13_12_10, PTG1_FN),
- PINMUX_DATA(USB1D_TXENL_MARK, PSELA_15_14_00, PTG0_FN),
- PINMUX_DATA(PCC_CD1_MARK, PSELA_15_14_10, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(RAS_MARK, PTH6_FN),
- PINMUX_DATA(CAS_MARK, PTH5_FN),
- PINMUX_DATA(CKE_MARK, PTH4_FN),
- PINMUX_DATA(STATUS1_MARK, PTH3_FN),
- PINMUX_DATA(STATUS0_MARK, PTH2_FN),
- PINMUX_DATA(USB2_PWR_EN_MARK, PTH1_FN),
- PINMUX_DATA(USB1_PWR_EN_USBF_UPLUP_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(AUDCK_MARK, PTJ6_FN),
- PINMUX_DATA(ASEBRKAK_MARK, PTJ5_FN),
- PINMUX_DATA(AUDATA3_MARK, PTJ4_FN),
- PINMUX_DATA(AUDATA2_MARK, PTJ3_FN),
- PINMUX_DATA(AUDATA1_MARK, PTJ2_FN),
- PINMUX_DATA(AUDATA0_MARK, PTJ1_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(PCC_RESET_MARK, PTK3_FN),
- PINMUX_DATA(PCC_RDY_MARK, PTK2_FN),
- PINMUX_DATA(PCC_VS2_MARK, PTK1_FN),
- PINMUX_DATA(PCC_VS1_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(TRST_MARK, PTL7_FN),
- PINMUX_DATA(TMS_MARK, PTL6_FN),
- PINMUX_DATA(TDO_MARK, PTL5_FN),
- PINMUX_DATA(TDI_MARK, PTL4_FN),
- PINMUX_DATA(TCK_MARK, PTL3_FN),
-
- /* PTM FN */
- PINMUX_DATA(DREQ1_MARK, PTM7_FN),
- PINMUX_DATA(DREQ0_MARK, PTM6_FN),
- PINMUX_DATA(DACK1_MARK, PTM5_FN),
- PINMUX_DATA(DACK0_MARK, PTM4_FN),
- PINMUX_DATA(TEND1_MARK, PTM3_FN),
- PINMUX_DATA(TEND0_MARK, PTM2_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTM1_FN),
- PINMUX_DATA(CS6B_CE1B_MARK, PTM0_FN),
-
- /* PTP FN */
- PINMUX_DATA(USB1D_SUSPEND_MARK, PSELA_1_0_00, PTP4_FN),
- PINMUX_DATA(REFOUT_MARK, PSELA_1_0_01, PTP4_FN),
- PINMUX_DATA(IRQOUT_MARK, PSELA_1_0_10, PTP4_FN),
- PINMUX_DATA(IRQ3_IRL3_MARK, PTP3_FN),
- PINMUX_DATA(IRQ2_IRL2_MARK, PTP2_FN),
- PINMUX_DATA(IRQ1_IRL1_MARK, PTP1_FN),
- PINMUX_DATA(IRQ0_IRL0_MARK, PTP0_FN),
-
- /* PTR FN */
- PINMUX_DATA(A25_MARK, PTR7_FN),
- PINMUX_DATA(A24_MARK, PTR6_FN),
- PINMUX_DATA(A23_MARK, PTR5_FN),
- PINMUX_DATA(A22_MARK, PTR4_FN),
- PINMUX_DATA(A21_MARK, PTR3_FN),
- PINMUX_DATA(A20_MARK, PTR2_FN),
- PINMUX_DATA(A19_MARK, PTR1_FN),
- PINMUX_DATA(A0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SIOF0_SYNC_MARK, PTS4_FN),
- PINMUX_DATA(SIOF0_MCLK_MARK, PTS3_FN),
- PINMUX_DATA(SIOF0_TXD_MARK, PTS2_FN),
- PINMUX_DATA(SIOF0_RXD_MARK, PTS1_FN),
- PINMUX_DATA(SIOF0_SCK_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_CTS_MARK, PSELB_15_14_00, PTT4_FN),
- PINMUX_DATA(TPU_TO1_MARK, PSELB_15_14_11, PTT4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, PSELB_15_14_00, PTT3_FN),
- PINMUX_DATA(TPU_TO0_MARK, PSELB_15_14_11, PTT3_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, PTT2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, PTT1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(SIOF1_SYNC_MARK, PTU4_FN),
- PINMUX_DATA(SIOF1_MCLK_MARK, PSELD_11_10_00, PTU3_FN),
- PINMUX_DATA(TPU_TI3B_MARK, PSELD_11_10_01, PTU3_FN),
- PINMUX_DATA(SIOF1_TXD_MARK, PSELD_15_14_00, PTU2_FN),
- PINMUX_DATA(TPU_TI3A_MARK, PSELD_15_14_01, PTU2_FN),
- PINMUX_DATA(MMC_DAT_MARK, PSELD_15_14_10, PTU2_FN),
- PINMUX_DATA(SIOF1_RXD_MARK, PSELC_13_12_00, PTU1_FN),
- PINMUX_DATA(TPU_TI2B_MARK, PSELC_13_12_01, PTU1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PSELC_13_12_10, PTU1_FN),
- PINMUX_DATA(SIOF1_SCK_MARK, PSELC_15_14_00, PTU0_FN),
- PINMUX_DATA(TPU_TI2A_MARK, PSELC_15_14_01, PTU0_FN),
- PINMUX_DATA(MMC_CLK_MARK, PSELC_15_14_10, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(SCIF1_CTS_MARK, PSELB_11_10_00, PTV4_FN),
- PINMUX_DATA(TPU_TO3_MARK, PSELB_11_10_01, PTV4_FN),
- PINMUX_DATA(MMC_VDDON_MARK, PSELB_11_10_10, PTV4_FN),
- PINMUX_DATA(LCD_VEPWC_MARK, PSELB_11_10_11, PTV4_FN),
- PINMUX_DATA(SCIF1_RTS_MARK, PSELB_13_12_00, PTV3_FN),
- PINMUX_DATA(TPU_TO2_MARK, PSELB_13_12_01, PTV3_FN),
- PINMUX_DATA(MMC_ODMOD_MARK, PSELB_13_12_10, PTV3_FN),
- PINMUX_DATA(LCD_VCPWC_MARK, PSELB_13_12_11, PTV3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSELC_9_8_00, PTV2_FN),
- PINMUX_DATA(SIM_D_MARK, PSELC_9_8_10, PTV2_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSELC_11_10_00, PTV1_FN),
- PINMUX_DATA(SIM_RST_MARK, PSELC_11_10_10, PTV1_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSELD_1_0_00, PTV0_FN),
- PINMUX_DATA(SIM_CLK_MARK, PSELD_1_0_10, PTV0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTP */
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A0),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT),
-
- /* LCDC */
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
-
- /* AFEIF */
- GPIO_FN(AFE_RXIN),
- GPIO_FN(AFE_RDET),
- GPIO_FN(AFE_FS),
- GPIO_FN(AFE_TXOUT),
- GPIO_FN(AFE_SCLK),
- GPIO_FN(AFE_RLYCNT),
- GPIO_FN(AFE_HC1),
-
- /* IIC */
- GPIO_FN(IIC_SCL),
- GPIO_FN(IIC_SDA),
-
- /* DAC */
- GPIO_FN(DA1),
- GPIO_FN(DA0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* USB */
- GPIO_FN(USB1D_RCV),
- GPIO_FN(USB1D_TXSE0),
- GPIO_FN(USB1D_TXDPLS),
- GPIO_FN(USB1D_DMNS),
- GPIO_FN(USB1D_DPLS),
- GPIO_FN(USB1D_SPEED),
- GPIO_FN(USB1D_TXENL),
-
- GPIO_FN(USB2_PWR_EN),
- GPIO_FN(USB1_PWR_EN_USBF_UPLUP),
- GPIO_FN(USB1D_SUSPEND),
-
- /* INTC */
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3_IRL3),
- GPIO_FN(IRQ2_IRL2),
- GPIO_FN(IRQ1_IRL1),
- GPIO_FN(IRQ0_IRL0),
-
- /* PCC */
- GPIO_FN(PCC_REG),
- GPIO_FN(PCC_DRV),
- GPIO_FN(PCC_BVD2),
- GPIO_FN(PCC_BVD1),
- GPIO_FN(PCC_CD2),
- GPIO_FN(PCC_CD1),
- GPIO_FN(PCC_RESET),
- GPIO_FN(PCC_RDY),
- GPIO_FN(PCC_VS2),
- GPIO_FN(PCC_VS1),
-
- /* HUDI */
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(ASEBRKAK),
- GPIO_FN(TRST),
- GPIO_FN(TMS),
- GPIO_FN(TDO),
- GPIO_FN(TDI),
- GPIO_FN(TCK),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(TEND0),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_MCLK),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
- GPIO_FN(SIOF0_SCK),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_MCLK),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
- GPIO_FN(SIOF1_SCK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* TPU */
- GPIO_FN(TPU_TO1),
- GPIO_FN(TPU_TO0),
- GPIO_FN(TPU_TI3B),
- GPIO_FN(TPU_TI3A),
- GPIO_FN(TPU_TI2B),
- GPIO_FN(TPU_TI2A),
- GPIO_FN(TPU_TO3),
- GPIO_FN(TPU_TO2),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* MMC */
- GPIO_FN(MMC_DAT),
- GPIO_FN(MMC_CMD),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_VDDON),
- GPIO_FN(MMC_ODMOD),
-
- /* SYSC */
- GPIO_FN(STATUS0),
- GPIO_FN(STATUS1),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTE6_FN, 0, 0, PTE6_IN,
- PTE5_FN, 0, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6_FN, 0, 0, PTF6_IN,
- PTF5_FN, 0, 0, PTF5_IN,
- PTF4_FN, 0, 0, PTF4_IN,
- PTF3_FN, 0, 0, PTF3_IN,
- PTF2_FN, 0, 0, PTF2_IN,
- PTF1_FN, 0, 0, PTF1_IN,
- PTF0_FN, 0, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTG6_FN, PTG6_OUT, 0, PTG6_IN,
- PTG5_FN, PTG5_OUT, 0, PTG5_IN,
- PTG4_FN, PTG4_OUT, 0, PTG4_IN,
- PTG3_FN, PTG3_OUT, 0, PTG3_IN,
- PTG2_FN, PTG2_OUT, 0, PTG2_IN,
- PTG1_FN, PTG1_OUT, 0, PTG1_IN,
- PTG0_FN, PTG0_OUT, 0, PTG0_IN ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, PTJ6_IN,
- PTJ5_FN, PTJ5_OUT, 0, PTJ5_IN,
- PTJ4_FN, PTJ4_OUT, 0, PTJ4_IN,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PKCR", 0xa4050112, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PLCR", 0xa4050114, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xa4050118, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTP4_FN, PTP4_OUT, 0, PTP4_IN,
- PTP3_FN, PTP3_OUT, 0, PTP3_IN,
- PTP2_FN, PTP2_OUT, 0, PTP2_IN,
- PTP1_FN, PTP1_OUT, 0, PTP1_IN,
- PTP0_FN, PTP0_OUT, 0, PTP0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011a, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, PTR3_OUT, 0, PTR3_IN,
- PTR2_FN, PTR2_OUT, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050120, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050122, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050140, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050142, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050144, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050148, 8, GROUP(
- 0, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405014a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405014c, 8, GROUP(
- 0, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405014e, 8, GROUP(
- 0, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050150, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050152, 8, GROUP(
- 0, 0, 0, 0,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050154, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050156, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xa4050158, 8, GROUP(
- 0, 0, 0, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405015a, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405015c, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa405015e, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7720_pinmux_info = {
- .name = "sh7720_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7722.c b/drivers/pinctrl/renesas/pfc-sh7722.c
deleted file mode 100644
index 4b82ac2c5e91d7..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7722.c
+++ /dev/null
@@ -1,1703 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <cpu/sh7722.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC5_DATA, PTC4_DATA, PTC3_DATA, PTC2_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR4_DATA, PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ5_DATA, PTZ4_DATA, PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC5_IN, PTC4_IN, PTC3_IN, PTC2_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN, PTD3_IN, PTD2_IN, PTD1_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN, PTF3_IN, PTF2_IN, PTF1_IN,
- PTH6_IN, PTH5_IN, PTH1_IN, PTH0_IN,
- PTJ1_IN, PTJ0_IN,
- PTK6_IN, PTK5_IN, PTK4_IN, PTK3_IN, PTK2_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ5_IN, PTQ4_IN, PTQ3_IN, PTQ2_IN, PTQ0_IN,
- PTR2_IN,
- PTS4_IN, PTS2_IN, PTS1_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW6_IN, PTW4_IN, PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX6_IN, PTX5_IN, PTX4_IN, PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY5_IN, PTY4_IN, PTY3_IN, PTY2_IN, PTY0_IN,
- PTZ5_IN, PTZ4_IN, PTZ3_IN, PTZ2_IN, PTZ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA5_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC4_OUT, PTC3_OUT, PTC2_OUT, PTC0_OUT,
- PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT, PTE1_OUT, PTE0_OUT,
- PTF6_OUT, PTF5_OUT, PTF4_OUT, PTF3_OUT, PTF2_OUT, PTF0_OUT,
- PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK6_OUT, PTK5_OUT, PTK4_OUT, PTK3_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR4_OUT, PTR3_OUT, PTR1_OUT, PTR0_OUT,
- PTS3_OUT, PTS2_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW5_OUT, PTW4_OUT, PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX6_OUT, PTX5_OUT, PTX4_OUT, PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY5_OUT, PTY4_OUT, PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- SCIF2_TXD_MARK, SCIF2_RXD_MARK,
- SCIF2_RTS_MARK, SCIF2_CTS_MARK, SCIF2_SCK_MARK,
- SIOTXD_MARK, SIORXD_MARK,
- SIOD_MARK, SIOSTRB0_MARK, SIOSTRB1_MARK,
- SIOSCK_MARK, SIOMCK_MARK,
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_CLK_MARK, VIO_VD_MARK, VIO_HD_MARK, VIO_FLD_MARK,
- VIO_CKO_MARK, VIO_STEX_MARK, VIO_STEM_MARK, VIO_VD2_MARK,
- VIO_HD2_MARK, VIO_CLK2_MARK,
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDLCLK_MARK, LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDDON2_MARK, LCDVCPWC2_MARK, LCDVEPWC2_MARK, LCDVSYN2_MARK,
- LCDCS2_MARK,
- IOIS16_MARK, A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- BS_MARK, CS6B_CE1B_MARK, WAIT_MARK, CS6A_CE2B_MARK,
- HPD63_MARK, HPD62_MARK, HPD61_MARK, HPD60_MARK,
- HPD59_MARK, HPD58_MARK, HPD57_MARK, HPD56_MARK,
- HPD55_MARK, HPD54_MARK, HPD53_MARK, HPD52_MARK,
- HPD51_MARK, HPD50_MARK, HPD49_MARK, HPD48_MARK,
- HPDQM7_MARK, HPDQM6_MARK, HPDQM5_MARK, HPDQM4_MARK,
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
- SDHICD_MARK, SDHIWP_MARK, SDHID3_MARK, SDHID2_MARK,
- SDHID1_MARK, SDHID0_MARK, SDHICMD_MARK, SDHICLK_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAISLD_MARK, SIUAILR_MARK,
- SIUAIBT_MARK, SIUAOSLD_MARK, SIUMCKA_MARK, SIUFCKA_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBISLD_MARK, SIUBILR_MARK,
- SIUBIBT_MARK, SIUBOSLD_MARK, SIUMCKB_MARK, SIUFCKB_MARK,
- AUDSYNC_MARK, AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- DACK_MARK, DREQ0_MARK,
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
- STATUS0_MARK, PDSTATUS_MARK,
- SIOF0_MCK_MARK, SIOF0_SCK_MARK,
- SIOF0_SYNC_MARK, SIOF0_SS1_MARK, SIOF0_SS2_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF1_MCK_MARK, SIOF1_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_SS1_MARK, SIOF1_SS2_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- TS_SDAT_MARK, TS_SCK_MARK, TS_SDEN_MARK, TS_SPSYNC_MARK,
- IRDA_IN_MARK, IRDA_OUT_MARK,
- TPUTO_MARK,
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
- PINMUX_MARK_END,
-
- PINMUX_FUNCTION_BEGIN,
- VIO_D7_SCIF1_SCK, VIO_D6_SCIF1_RXD, VIO_D5_SCIF1_TXD, VIO_D4,
- VIO_D3, VIO_D2, VIO_D1, VIO_D0_LCDLCLK,
- HPD55, HPD54, HPD53, HPD52, HPD51, HPD50, HPD49, HPD48,
- IOIS16, HPDQM7, HPDQM6, HPDQM5, HPDQM4,
- SDHICD, SDHIWP, SDHID3, IRQ2_SDHID2, SDHID1, SDHID0, SDHICMD, SDHICLK,
- A25, A24, A23, A22, IRQ5, IRQ4_BS,
- PTF6, SIOSCK_SIUBOBT, SIOSTRB1_SIUBOLR,
- SIOSTRB0_SIUBIBT, SIOD_SIUBILR, SIORXD_SIUBISLD, SIOTXD_SIUBOSLD,
- AUDSYNC, AUDATA3, AUDATA2, AUDATA1, AUDATA0,
- LCDVCPWC_LCDVCPWC2, LCDVSYN2_DACK, LCDVSYN, LCDDISP_LCDRS,
- LCDHSYN_LCDCS, LCDDON_LCDDON2, LCDD17_DV_HSYNC, LCDD16_DV_VSYNC,
- STATUS0, PDSTATUS, IRQ1, IRQ0,
- SIUAILR_SIOF1_SS2, SIUAIBT_SIOF1_SS1, SIUAOLR_SIOF1_SYNC,
- SIUAOBT_SIOF1_SCK, SIUAISLD_SIOF1_RXD, SIUAOSLD_SIOF1_TXD, PTK0,
- LCDD15_DV_D15, LCDD14_DV_D14, LCDD13_DV_D13, LCDD12_DV_D12,
- LCDD11_DV_D11, LCDD10_DV_D10, LCDD9_DV_D9, LCDD8_DV_D8,
- LCDD7_DV_D7, LCDD6_DV_D6, LCDD5_DV_D5, LCDD4_DV_D4,
- LCDD3_DV_D3, LCDD2_DV_D2, LCDD1_DV_D1, LCDD0_DV_D0,
- HPD63, HPD62, HPD61, HPD60, HPD59, HPD58, HPD57, HPD56,
- SIOF0_SS2_SIM_RST, SIOF0_SS1_TS_SPSYNC, SIOF0_SYNC_TS_SDEN,
- SIOF0_SCK_TS_SCK, PTQ2, PTQ1, PTQ0,
- LCDRD, CS6B_CE1B_LCDCS2, WAIT, LCDDCK_LCDWR, LCDVEPWC_LCDVEPWC2,
- SCIF0_CTS_SIUAISPD, SCIF0_RTS_SIUAOSPD,
- SCIF0_SCK_TPUTO, SCIF0_RXD, SCIF0_TXD,
- FOE_VIO_VD2, FWE, FSC, DREQ0, FCDE,
- NAF2_VIO_D10, NAF1_VIO_D9, NAF0_VIO_D8,
- FRB_VIO_CLK2, FCE_VIO_HD2,
- NAF7_VIO_D15, NAF6_VIO_D14, NAF5_VIO_D13, NAF4_VIO_D12, NAF3_VIO_D11,
- VIO_FLD_SCIF2_CTS, VIO_CKO_SCIF2_RTS, VIO_STEX_SCIF2_SCK,
- VIO_STEM_SCIF2_TXD, VIO_HD_SCIF2_RXD,
- VIO_VD_SCIF1_CTS, VIO_CLK_SCIF1_RTS,
- CS6A_CE2B, LCDD23, LCDD22, LCDD21, LCDD20,
- LCDD19_DV_CLKI, LCDD18_DV_CLK,
- KEYOUT5_IN5, KEYOUT4_IN6, KEYOUT3, KEYOUT2, KEYOUT1, KEYOUT0,
- KEYIN4_IRQ7, KEYIN3, KEYIN2, KEYIN1, KEYIN0_IRQ6,
-
- PSA15_KEYIN0, PSA15_IRQ6, PSA14_KEYIN4, PSA14_IRQ7,
- PSA9_IRQ4, PSA9_BS, PSA4_IRQ2, PSA4_SDHID2,
- PSB15_SIOTXD, PSB15_SIUBOSLD, PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR, PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR, PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB, PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT, PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK, PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC, PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK, PSB0_SIUAOSLD, PSB0_SIOF1_TXD,
- PSC15_SIUAISLD, PSC15_SIOF1_RXD, PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC, PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2, PSC0_NAF, PSC0_VIO,
- PSD13_VIO, PSD13_SCIF2, PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1, PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB, PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD, PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2, PSD0_LCDD19_LCDD0, PSD0_DV,
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT, PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- PSE3_FLCTL, PSE3_VIO, PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9, PSE0_NAF0, PSE0_VIO_D8,
-
- HIZA14_KEYSC, HIZA14_HIZ,
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- HIZB4_SIUA, HIZB4_HIZ,
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ,
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- PINMUX_FUNCTION_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN),
- PINMUX_DATA(PTA3_DATA, PTA3_IN),
- PINMUX_DATA(PTA2_DATA, PTA2_IN),
- PINMUX_DATA(PTA1_DATA, PTA1_IN),
- PINMUX_DATA(PTA0_DATA, PTA0_IN),
-
- /* PTB */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC */
- PINMUX_DATA(PTC7_DATA, PTC7_IN),
- PINMUX_DATA(PTC5_DATA, PTC5_IN),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD */
- PINMUX_DATA(PTD7_DATA, PTD7_IN),
- PINMUX_DATA(PTD6_DATA, PTD6_OUT, PTD6_IN),
- PINMUX_DATA(PTD5_DATA, PTD5_OUT, PTD5_IN),
- PINMUX_DATA(PTD4_DATA, PTD4_OUT, PTD4_IN),
- PINMUX_DATA(PTD3_DATA, PTD3_OUT, PTD3_IN),
- PINMUX_DATA(PTD2_DATA, PTD2_OUT, PTD2_IN),
- PINMUX_DATA(PTD1_DATA, PTD1_OUT, PTD1_IN),
- PINMUX_DATA(PTD0_DATA, PTD0_OUT),
-
- /* PTE */
- PINMUX_DATA(PTE7_DATA, PTE7_OUT, PTE7_IN),
- PINMUX_DATA(PTE6_DATA, PTE6_OUT, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_OUT, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_OUT, PTE4_IN),
- PINMUX_DATA(PTE1_DATA, PTE1_OUT, PTE1_IN),
- PINMUX_DATA(PTE0_DATA, PTE0_OUT, PTE0_IN),
-
- /* PTF */
- PINMUX_DATA(PTF6_DATA, PTF6_OUT, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_OUT, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_OUT, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_OUT, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_OUT, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_OUT),
-
- /* PTG */
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH */
- PINMUX_DATA(PTH7_DATA, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_OUT, PTH6_IN),
- PINMUX_DATA(PTH5_DATA, PTH5_OUT, PTH5_IN),
- PINMUX_DATA(PTH4_DATA, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_OUT, PTH1_IN),
- PINMUX_DATA(PTH0_DATA, PTH0_OUT, PTH0_IN),
-
- /* PTJ */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_OUT, PTJ1_IN),
- PINMUX_DATA(PTJ0_DATA, PTJ0_OUT, PTJ0_IN),
-
- /* PTK */
- PINMUX_DATA(PTK6_DATA, PTK6_OUT, PTK6_IN),
- PINMUX_DATA(PTK5_DATA, PTK5_OUT, PTK5_IN),
- PINMUX_DATA(PTK4_DATA, PTK4_OUT, PTK4_IN),
- PINMUX_DATA(PTK3_DATA, PTK3_OUT, PTK3_IN),
- PINMUX_DATA(PTK2_DATA, PTK2_IN),
- PINMUX_DATA(PTK1_DATA, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_OUT, PTK0_IN),
-
- /* PTL */
- PINMUX_DATA(PTL7_DATA, PTL7_OUT, PTL7_IN),
- PINMUX_DATA(PTL6_DATA, PTL6_OUT, PTL6_IN),
- PINMUX_DATA(PTL5_DATA, PTL5_OUT, PTL5_IN),
- PINMUX_DATA(PTL4_DATA, PTL4_OUT, PTL4_IN),
- PINMUX_DATA(PTL3_DATA, PTL3_OUT, PTL3_IN),
- PINMUX_DATA(PTL2_DATA, PTL2_OUT, PTL2_IN),
- PINMUX_DATA(PTL1_DATA, PTL1_OUT, PTL1_IN),
- PINMUX_DATA(PTL0_DATA, PTL0_OUT, PTL0_IN),
-
- /* PTM */
- PINMUX_DATA(PTM7_DATA, PTM7_OUT, PTM7_IN),
- PINMUX_DATA(PTM6_DATA, PTM6_OUT, PTM6_IN),
- PINMUX_DATA(PTM5_DATA, PTM5_OUT, PTM5_IN),
- PINMUX_DATA(PTM4_DATA, PTM4_OUT, PTM4_IN),
- PINMUX_DATA(PTM3_DATA, PTM3_OUT, PTM3_IN),
- PINMUX_DATA(PTM2_DATA, PTM2_OUT, PTM2_IN),
- PINMUX_DATA(PTM1_DATA, PTM1_OUT, PTM1_IN),
- PINMUX_DATA(PTM0_DATA, PTM0_OUT, PTM0_IN),
-
- /* PTN */
- PINMUX_DATA(PTN7_DATA, PTN7_OUT, PTN7_IN),
- PINMUX_DATA(PTN6_DATA, PTN6_OUT, PTN6_IN),
- PINMUX_DATA(PTN5_DATA, PTN5_OUT, PTN5_IN),
- PINMUX_DATA(PTN4_DATA, PTN4_OUT, PTN4_IN),
- PINMUX_DATA(PTN3_DATA, PTN3_OUT, PTN3_IN),
- PINMUX_DATA(PTN2_DATA, PTN2_OUT, PTN2_IN),
- PINMUX_DATA(PTN1_DATA, PTN1_OUT, PTN1_IN),
- PINMUX_DATA(PTN0_DATA, PTN0_OUT, PTN0_IN),
-
- /* PTQ */
- PINMUX_DATA(PTQ6_DATA, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_OUT, PTQ5_IN),
- PINMUX_DATA(PTQ4_DATA, PTQ4_OUT, PTQ4_IN),
- PINMUX_DATA(PTQ3_DATA, PTQ3_OUT, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_OUT, PTQ0_IN),
-
- /* PTR */
- PINMUX_DATA(PTR4_DATA, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_OUT),
-
- /* PTS */
- PINMUX_DATA(PTS4_DATA, PTS4_IN),
- PINMUX_DATA(PTS3_DATA, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_OUT, PTS2_IN),
- PINMUX_DATA(PTS1_DATA, PTS1_IN),
- PINMUX_DATA(PTS0_DATA, PTS0_OUT),
-
- /* PTT */
- PINMUX_DATA(PTT4_DATA, PTT4_OUT, PTT4_IN),
- PINMUX_DATA(PTT3_DATA, PTT3_OUT, PTT3_IN),
- PINMUX_DATA(PTT2_DATA, PTT2_OUT, PTT2_IN),
- PINMUX_DATA(PTT1_DATA, PTT1_IN),
- PINMUX_DATA(PTT0_DATA, PTT0_OUT),
-
- /* PTU */
- PINMUX_DATA(PTU4_DATA, PTU4_OUT, PTU4_IN),
- PINMUX_DATA(PTU3_DATA, PTU3_OUT, PTU3_IN),
- PINMUX_DATA(PTU2_DATA, PTU2_OUT, PTU2_IN),
- PINMUX_DATA(PTU1_DATA, PTU1_IN),
- PINMUX_DATA(PTU0_DATA, PTU0_OUT, PTU0_IN),
-
- /* PTV */
- PINMUX_DATA(PTV4_DATA, PTV4_OUT, PTV4_IN),
- PINMUX_DATA(PTV3_DATA, PTV3_OUT, PTV3_IN),
- PINMUX_DATA(PTV2_DATA, PTV2_OUT, PTV2_IN),
- PINMUX_DATA(PTV1_DATA, PTV1_OUT, PTV1_IN),
- PINMUX_DATA(PTV0_DATA, PTV0_OUT, PTV0_IN),
-
- /* PTW */
- PINMUX_DATA(PTW6_DATA, PTW6_IN),
- PINMUX_DATA(PTW5_DATA, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_OUT, PTW4_IN),
- PINMUX_DATA(PTW3_DATA, PTW3_OUT, PTW3_IN),
- PINMUX_DATA(PTW2_DATA, PTW2_OUT, PTW2_IN),
- PINMUX_DATA(PTW1_DATA, PTW1_OUT, PTW1_IN),
- PINMUX_DATA(PTW0_DATA, PTW0_OUT, PTW0_IN),
-
- /* PTX */
- PINMUX_DATA(PTX6_DATA, PTX6_OUT, PTX6_IN),
- PINMUX_DATA(PTX5_DATA, PTX5_OUT, PTX5_IN),
- PINMUX_DATA(PTX4_DATA, PTX4_OUT, PTX4_IN),
- PINMUX_DATA(PTX3_DATA, PTX3_OUT, PTX3_IN),
- PINMUX_DATA(PTX2_DATA, PTX2_OUT, PTX2_IN),
- PINMUX_DATA(PTX1_DATA, PTX1_OUT, PTX1_IN),
- PINMUX_DATA(PTX0_DATA, PTX0_OUT, PTX0_IN),
-
- /* PTY */
- PINMUX_DATA(PTY5_DATA, PTY5_OUT, PTY5_IN),
- PINMUX_DATA(PTY4_DATA, PTY4_OUT, PTY4_IN),
- PINMUX_DATA(PTY3_DATA, PTY3_OUT, PTY3_IN),
- PINMUX_DATA(PTY2_DATA, PTY2_OUT, PTY2_IN),
- PINMUX_DATA(PTY1_DATA, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_OUT, PTY0_IN),
-
- /* PTZ */
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN),
-
- /* SCIF0 */
- PINMUX_DATA(SCIF0_TXD_MARK, SCIF0_TXD),
- PINMUX_DATA(SCIF0_RXD_MARK, SCIF0_RXD),
- PINMUX_DATA(SCIF0_RTS_MARK, PSD7_SCIF0_RTS, SCIF0_RTS_SIUAOSPD),
- PINMUX_DATA(SCIF0_CTS_MARK, PSD6_SCIF0_CTS, SCIF0_CTS_SIUAISPD),
- PINMUX_DATA(SCIF0_SCK_MARK, PSD8_SCIF0_SCK, SCIF0_SCK_TPUTO),
-
- /* SCIF1 */
- PINMUX_DATA(SCIF1_TXD_MARK, PSD11_SCIF1, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(SCIF1_RXD_MARK, PSD11_SCIF1, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(SCIF1_RTS_MARK, PSD12_SCIF1, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(SCIF1_CTS_MARK, PSD12_SCIF1, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(SCIF1_SCK_MARK, PSD11_SCIF1, VIO_D7_SCIF1_SCK),
-
- /* SCIF2 */
- PINMUX_DATA(SCIF2_TXD_MARK, PSD13_SCIF2, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(SCIF2_RXD_MARK, PSD13_SCIF2, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(SCIF2_RTS_MARK, PSD13_SCIF2, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(SCIF2_CTS_MARK, PSD13_SCIF2, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(SCIF2_SCK_MARK, PSD13_SCIF2, VIO_STEX_SCIF2_SCK),
-
- /* SIO */
- PINMUX_DATA(SIOTXD_MARK, PSB15_SIOTXD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIORXD_MARK, PSB14_SIORXD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIOD_MARK, PSB13_SIOD, SIOD_SIUBILR),
- PINMUX_DATA(SIOSTRB0_MARK, PSB12_SIOSTRB0, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIOSTRB1_MARK, PSB11_SIOSTRB1, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIOSCK_MARK, PSB10_SIOSCK, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIOMCK_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIOMCK, PTF6),
-
- /* CEU */
- PINMUX_DATA(VIO_D15_MARK, PSC0_VIO, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(VIO_D14_MARK, PSC0_VIO, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(VIO_D13_MARK, PSC0_VIO, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(VIO_D12_MARK, PSC0_VIO, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(VIO_D11_MARK, PSC0_VIO, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(VIO_D10_MARK, PSE2_VIO_D10, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(VIO_D9_MARK, PSE1_VIO_D9, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(VIO_D8_MARK, PSE0_VIO_D8, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(VIO_D7_MARK, PSD11_VIO, VIO_D7_SCIF1_SCK),
- PINMUX_DATA(VIO_D6_MARK, PSD11_VIO, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(VIO_D5_MARK, PSD11_VIO, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(VIO_D4_MARK, VIO_D4),
- PINMUX_DATA(VIO_D3_MARK, VIO_D3),
- PINMUX_DATA(VIO_D2_MARK, VIO_D2),
- PINMUX_DATA(VIO_D1_MARK, VIO_D1),
- PINMUX_DATA(VIO_D0_MARK, PSD10_VIO_D0, VIO_D0_LCDLCLK),
- PINMUX_DATA(VIO_CLK_MARK, PSD12_VIO, MSELB9_VIO, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(VIO_VD_MARK, PSD12_VIO, MSELB9_VIO, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(VIO_HD_MARK, PSD13_VIO, MSELB9_VIO, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(VIO_FLD_MARK, PSD13_VIO, HIZA9_VIO, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(VIO_CKO_MARK, PSD13_VIO, HIZA9_VIO, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(VIO_STEX_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEX_SCIF2_SCK),
- PINMUX_DATA(VIO_STEM_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FCE_VIO_HD2),
- PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FRB_VIO_CLK2),
-
- /* LCDC */
- PINMUX_DATA(LCDD23_MARK, HIZA8_LCDC, LCDD23),
- PINMUX_DATA(LCDD22_MARK, HIZA8_LCDC, LCDD22),
- PINMUX_DATA(LCDD21_MARK, HIZA8_LCDC, LCDD21),
- PINMUX_DATA(LCDD20_MARK, HIZA8_LCDC, LCDD20),
- PINMUX_DATA(LCDD19_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD19_DV_CLKI),
- PINMUX_DATA(LCDD18_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD18_DV_CLK),
- PINMUX_DATA(LCDD17_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD17_DV_HSYNC),
- PINMUX_DATA(LCDD16_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD16_DV_VSYNC),
- PINMUX_DATA(LCDD15_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD15_DV_D15),
- PINMUX_DATA(LCDD14_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD14_DV_D14),
- PINMUX_DATA(LCDD13_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD13_DV_D13),
- PINMUX_DATA(LCDD12_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD12_DV_D12),
- PINMUX_DATA(LCDD11_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD11_DV_D11),
- PINMUX_DATA(LCDD10_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD10_DV_D10),
- PINMUX_DATA(LCDD9_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD9_DV_D9),
- PINMUX_DATA(LCDD8_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD8_DV_D8),
- PINMUX_DATA(LCDD7_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD7_DV_D7),
- PINMUX_DATA(LCDD6_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD6_DV_D6),
- PINMUX_DATA(LCDD5_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD5_DV_D5),
- PINMUX_DATA(LCDD4_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD4_DV_D4),
- PINMUX_DATA(LCDD3_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD3_DV_D3),
- PINMUX_DATA(LCDD2_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD2_DV_D2),
- PINMUX_DATA(LCDD1_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD1_DV_D1),
- PINMUX_DATA(LCDD0_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD0_DV_D0),
- PINMUX_DATA(LCDLCLK_MARK, PSD10_LCDLCLK, VIO_D0_LCDLCLK),
- /* Main LCD */
- PINMUX_DATA(LCDDON_MARK, PSD2_LCDDON, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN_MARK, HIZA7_LCDC, LCDVSYN),
- /* Main LCD - RGB Mode */
- PINMUX_DATA(LCDDCK_MARK, MSELB8_RGB, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDHSYN_MARK, MSELB8_RGB, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDDISP_MARK, MSELB8_RGB, HIZA7_LCDC, LCDDISP_LCDRS),
- /* Main LCD - SYS Mode */
- PINMUX_DATA(LCDRS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDDISP_LCDRS),
- PINMUX_DATA(LCDCS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDWR_MARK, MSELB8_SYS, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDRD_MARK, HIZA7_LCDC, LCDRD),
- /* Sub LCD - SYS Mode */
- PINMUX_DATA(LCDDON2_MARK, PSD2_LCDDON2, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN2_MARK, PSE12_LCDVSYN2, HIZA8_LCDC, LCDVSYN2_DACK),
- PINMUX_DATA(LCDCS2_MARK, PSD5_LCDCS2, CS6B_CE1B_LCDCS2),
-
- /* BSC */
- PINMUX_DATA(IOIS16_MARK, IOIS16),
- PINMUX_DATA(A25_MARK, A25),
- PINMUX_DATA(A24_MARK, A24),
- PINMUX_DATA(A23_MARK, A23),
- PINMUX_DATA(A22_MARK, A22),
- PINMUX_DATA(BS_MARK, PSA9_BS, IRQ4_BS),
- PINMUX_DATA(CS6B_CE1B_MARK, PSD5_CS6B_CE1B, CS6B_CE1B_LCDCS2),
- PINMUX_DATA(WAIT_MARK, WAIT),
- PINMUX_DATA(CS6A_CE2B_MARK, CS6A_CE2B),
-
- /* SBSC */
- PINMUX_DATA(HPD63_MARK, HPD63),
- PINMUX_DATA(HPD62_MARK, HPD62),
- PINMUX_DATA(HPD61_MARK, HPD61),
- PINMUX_DATA(HPD60_MARK, HPD60),
- PINMUX_DATA(HPD59_MARK, HPD59),
- PINMUX_DATA(HPD58_MARK, HPD58),
- PINMUX_DATA(HPD57_MARK, HPD57),
- PINMUX_DATA(HPD56_MARK, HPD56),
- PINMUX_DATA(HPD55_MARK, HPD55),
- PINMUX_DATA(HPD54_MARK, HPD54),
- PINMUX_DATA(HPD53_MARK, HPD53),
- PINMUX_DATA(HPD52_MARK, HPD52),
- PINMUX_DATA(HPD51_MARK, HPD51),
- PINMUX_DATA(HPD50_MARK, HPD50),
- PINMUX_DATA(HPD49_MARK, HPD49),
- PINMUX_DATA(HPD48_MARK, HPD48),
- PINMUX_DATA(HPDQM7_MARK, HPDQM7),
- PINMUX_DATA(HPDQM6_MARK, HPDQM6),
- PINMUX_DATA(HPDQM5_MARK, HPDQM5),
- PINMUX_DATA(HPDQM4_MARK, HPDQM4),
-
- /* IRQ */
- PINMUX_DATA(IRQ0_MARK, HIZC8_IRQ0, IRQ0),
- PINMUX_DATA(IRQ1_MARK, HIZC9_IRQ1, IRQ1),
- PINMUX_DATA(IRQ2_MARK, PSA4_IRQ2, HIZC10_IRQ2, IRQ2_SDHID2),
- PINMUX_DATA(IRQ3_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_IRQ3,
- HIZC11_IRQ3, PTQ0),
- PINMUX_DATA(IRQ4_MARK, PSA9_IRQ4, HIZC12_IRQ4, IRQ4_BS),
- PINMUX_DATA(IRQ5_MARK, HIZC13_IRQ5, IRQ5),
- PINMUX_DATA(IRQ6_MARK, PSA15_IRQ6, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(IRQ7_MARK, PSA14_IRQ7, HIZC15_IRQ7, KEYIN4_IRQ7),
-
- /* SDHI */
- PINMUX_DATA(SDHICD_MARK, SDHICD),
- PINMUX_DATA(SDHIWP_MARK, SDHIWP),
- PINMUX_DATA(SDHID3_MARK, SDHID3),
- PINMUX_DATA(SDHID2_MARK, PSA4_SDHID2, IRQ2_SDHID2),
- PINMUX_DATA(SDHID1_MARK, SDHID1),
- PINMUX_DATA(SDHID0_MARK, SDHID0),
- PINMUX_DATA(SDHICMD_MARK, SDHICMD),
- PINMUX_DATA(SDHICLK_MARK, SDHICLK),
-
- /* SIU - Port A */
- PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, HIZB4_SIUA, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, HIZB4_SIUA, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, HIZB4_SIUA, SIUAISLD_SIOF1_RXD),
- PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, HIZB4_SIUA, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, HIZB4_SIUA, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, HIZB4_SIUA, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, HIZB4_SIUA, PSB1_SIUMCKA, PTK0),
- PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, HIZB4_SIUA, PTK0),
-
- /* SIU - Port B */
- PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIUBOBT_MARK, PSB10_SIUBOBT, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIUBISLD_MARK, PSB14_SIUBISLD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIUBILR_MARK, PSB13_SIUBILR, SIOD_SIUBILR),
- PINMUX_DATA(SIUBIBT_MARK, PSB12_SIUBIBT, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIUBOSLD_MARK, PSB15_SIUBOSLD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIUMCKB_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIUMCKB, PTF6),
- PINMUX_DATA(SIUFCKB_MARK, PSD9_SIUFCKB, PTF6),
-
- /* AUD */
- PINMUX_DATA(AUDSYNC_MARK, AUDSYNC),
- PINMUX_DATA(AUDATA3_MARK, AUDATA3),
- PINMUX_DATA(AUDATA2_MARK, AUDATA2),
- PINMUX_DATA(AUDATA1_MARK, AUDATA1),
- PINMUX_DATA(AUDATA0_MARK, AUDATA0),
-
- /* DMAC */
- PINMUX_DATA(DACK_MARK, PSE12_DACK, LCDVSYN2_DACK),
- PINMUX_DATA(DREQ0_MARK, DREQ0),
-
- /* VOU */
- PINMUX_DATA(DV_CLKI_MARK, PSD0_DV, LCDD19_DV_CLKI),
- PINMUX_DATA(DV_CLK_MARK, PSD0_DV, LCDD18_DV_CLK),
- PINMUX_DATA(DV_HSYNC_MARK, PSD0_DV, LCDD17_DV_HSYNC),
- PINMUX_DATA(DV_VSYNC_MARK, PSD0_DV, LCDD16_DV_VSYNC),
- PINMUX_DATA(DV_D15_MARK, PSD0_DV, LCDD15_DV_D15),
- PINMUX_DATA(DV_D14_MARK, PSD0_DV, LCDD14_DV_D14),
- PINMUX_DATA(DV_D13_MARK, PSD0_DV, LCDD13_DV_D13),
- PINMUX_DATA(DV_D12_MARK, PSD0_DV, LCDD12_DV_D12),
- PINMUX_DATA(DV_D11_MARK, PSD0_DV, LCDD11_DV_D11),
- PINMUX_DATA(DV_D10_MARK, PSD0_DV, LCDD10_DV_D10),
- PINMUX_DATA(DV_D9_MARK, PSD0_DV, LCDD9_DV_D9),
- PINMUX_DATA(DV_D8_MARK, PSD0_DV, LCDD8_DV_D8),
- PINMUX_DATA(DV_D7_MARK, PSD0_DV, LCDD7_DV_D7),
- PINMUX_DATA(DV_D6_MARK, PSD0_DV, LCDD6_DV_D6),
- PINMUX_DATA(DV_D5_MARK, PSD0_DV, LCDD5_DV_D5),
- PINMUX_DATA(DV_D4_MARK, PSD0_DV, LCDD4_DV_D4),
- PINMUX_DATA(DV_D3_MARK, PSD0_DV, LCDD3_DV_D3),
- PINMUX_DATA(DV_D2_MARK, PSD0_DV, LCDD2_DV_D2),
- PINMUX_DATA(DV_D1_MARK, PSD0_DV, LCDD1_DV_D1),
- PINMUX_DATA(DV_D0_MARK, PSD0_DV, LCDD0_DV_D0),
-
- /* CPG */
- PINMUX_DATA(STATUS0_MARK, STATUS0),
- PINMUX_DATA(PDSTATUS_MARK, PDSTATUS),
-
- /* SIOF0 */
- PINMUX_DATA(SIOF0_MCK_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_SIOF0_MCK, PTQ0),
- PINMUX_DATA(SIOF0_SCK_MARK, PSB5_SIOF0_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(SIOF0_SYNC_MARK, PSB4_SIOF0_SYNC, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(SIOF0_SS1_MARK, PSB3_SIOF0_SS1, SIOF0_SS1_TS_SPSYNC),
- PINMUX_DATA(SIOF0_SS2_MARK, PSB2_SIOF0_SS2, SIOF0_SS2_SIM_RST),
- PINMUX_DATA(SIOF0_TXD_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_SIOF0_TXD, PTQ1),
- PINMUX_DATA(SIOF0_RXD_MARK, PSE13_SIOF0_RXD_IRDA_IN,
- PSB6_SIOF0_RXD, PTQ2),
-
- /* SIOF1 */
- PINMUX_DATA(SIOF1_MCK_MARK, PSE11_SIUMCKA_SIOF1_MCK,
- PSB1_SIOF1_MCK, PTK0),
- PINMUX_DATA(SIOF1_SCK_MARK, PSC14_SIOF1_SCK, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIOF1_SYNC_MARK, PSC13_SIOF1_SYNC, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIOF1_SS1_MARK, PSC12_SIOF1_SS1, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIOF1_SS2_MARK, PSC11_SIOF1_SS2, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIOF1_TXD_MARK, PSB0_SIOF1_TXD, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIOF1_RXD_MARK, PSC15_SIOF1_RXD, SIUAISLD_SIOF1_RXD),
-
- /* SIM */
- PINMUX_DATA(SIM_D_MARK, PSE15_SIM_D, PTQ0),
- PINMUX_DATA(SIM_CLK_MARK, PSE14_SIM_CLK, PTQ1),
- PINMUX_DATA(SIM_RST_MARK, PSB2_SIM_RST, SIOF0_SS2_SIM_RST),
-
- /* TSIF */
- PINMUX_DATA(TS_SDAT_MARK, PSE13_TS_SDAT, PTQ2),
- PINMUX_DATA(TS_SCK_MARK, PSB5_TS_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(TS_SDEN_MARK, PSB4_TS_SDEN, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(TS_SPSYNC_MARK, PSB3_TS_SPSYNC, SIOF0_SS1_TS_SPSYNC),
-
- /* IRDA */
- PINMUX_DATA(IRDA_IN_MARK, PSE13_SIOF0_RXD_IRDA_IN, PSB6_IRDA_IN, PTQ2),
- PINMUX_DATA(IRDA_OUT_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_IRDA_OUT, PTQ1),
-
- /* TPU */
- PINMUX_DATA(TPUTO_MARK, PSD8_TPUTO, SCIF0_SCK_TPUTO),
-
- /* FLCTL */
- PINMUX_DATA(FCE_MARK, PSE3_FLCTL, FCE_VIO_HD2),
- PINMUX_DATA(NAF7_MARK, PSC0_NAF, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(NAF6_MARK, PSC0_NAF, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(NAF5_MARK, PSC0_NAF, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(NAF4_MARK, PSC0_NAF, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(NAF3_MARK, PSC0_NAF, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(NAF2_MARK, PSE2_NAF2, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(NAF1_MARK, PSE1_NAF1, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(NAF0_MARK, PSE0_NAF0, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(FCDE_MARK, FCDE),
- PINMUX_DATA(FOE_MARK, PSE3_FLCTL, HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(FSC_MARK, FSC),
- PINMUX_DATA(FWE_MARK, FWE),
- PINMUX_DATA(FRB_MARK, PSE3_FLCTL, FRB_VIO_CLK2),
-
- /* KEYSC */
- PINMUX_DATA(KEYIN0_MARK, PSA15_KEYIN0, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(KEYIN1_MARK, HIZA14_KEYSC, KEYIN1),
- PINMUX_DATA(KEYIN2_MARK, HIZA14_KEYSC, KEYIN2),
- PINMUX_DATA(KEYIN3_MARK, HIZA14_KEYSC, KEYIN3),
- PINMUX_DATA(KEYIN4_MARK, PSA14_KEYIN4, HIZC15_IRQ7, KEYIN4_IRQ7),
- PINMUX_DATA(KEYOUT0_MARK, HIZA14_KEYSC, KEYOUT0),
- PINMUX_DATA(KEYOUT1_MARK, HIZA14_KEYSC, KEYOUT1),
- PINMUX_DATA(KEYOUT2_MARK, HIZA14_KEYSC, KEYOUT2),
- PINMUX_DATA(KEYOUT3_MARK, HIZA14_KEYSC, KEYOUT3),
- PINMUX_DATA(KEYOUT4_IN6_MARK, HIZA14_KEYSC, KEYOUT4_IN6),
- PINMUX_DATA(KEYOUT5_IN5_MARK, HIZA14_KEYSC, KEYOUT5_IN5),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SCIF2_RTS),
- GPIO_FN(SCIF2_CTS),
- GPIO_FN(SCIF2_SCK),
-
- /* SIO */
- GPIO_FN(SIOTXD),
- GPIO_FN(SIORXD),
- GPIO_FN(SIOD),
- GPIO_FN(SIOSTRB0),
- GPIO_FN(SIOSTRB1),
- GPIO_FN(SIOSCK),
- GPIO_FN(SIOMCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK),
- GPIO_FN(VIO_VD),
- GPIO_FN(VIO_HD),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_STEX),
- GPIO_FN(VIO_STEM),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
- /* Sub LCD - SYS Mode */
- GPIO_FN(LCDDON2),
- GPIO_FN(LCDVCPWC2),
- GPIO_FN(LCDVEPWC2),
- GPIO_FN(LCDVSYN2),
- GPIO_FN(LCDCS2),
-
- /* BSC */
- GPIO_FN(IOIS16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(BS),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(WAIT),
- GPIO_FN(CS6A_CE2B),
-
- /* SBSC */
- GPIO_FN(HPD63),
- GPIO_FN(HPD62),
- GPIO_FN(HPD61),
- GPIO_FN(HPD60),
- GPIO_FN(HPD59),
- GPIO_FN(HPD58),
- GPIO_FN(HPD57),
- GPIO_FN(HPD56),
- GPIO_FN(HPD55),
- GPIO_FN(HPD54),
- GPIO_FN(HPD53),
- GPIO_FN(HPD52),
- GPIO_FN(HPD51),
- GPIO_FN(HPD50),
- GPIO_FN(HPD49),
- GPIO_FN(HPD48),
- GPIO_FN(HPDQM7),
- GPIO_FN(HPDQM6),
- GPIO_FN(HPDQM5),
- GPIO_FN(HPDQM4),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* SDHI */
- GPIO_FN(SDHICD),
- GPIO_FN(SDHIWP),
- GPIO_FN(SDHID3),
- GPIO_FN(SDHID2),
- GPIO_FN(SDHID1),
- GPIO_FN(SDHID0),
- GPIO_FN(SDHICMD),
- GPIO_FN(SDHICLK),
-
- /* SIU - Port A */
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUMCKA),
- GPIO_FN(SIUFCKA),
-
- /* SIU - Port B */
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUMCKB),
- GPIO_FN(SIUFCKB),
-
- /* AUD */
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* DMAC */
- GPIO_FN(DACK),
- GPIO_FN(DREQ0),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_MCK),
- GPIO_FN(SIOF0_SCK),
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_SS1),
- GPIO_FN(SIOF0_SS2),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_MCK),
- GPIO_FN(SIOF1_SCK),
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_SS1),
- GPIO_FN(SIOF1_SS2),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* TSIF */
- GPIO_FN(TS_SDAT),
- GPIO_FN(TS_SCK),
- GPIO_FN(TS_SDEN),
- GPIO_FN(TS_SPSYNC),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* TPU */
- GPIO_FN(TPUTO),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- VIO_D7_SCIF1_SCK, PTA7_OUT, 0, PTA7_IN,
- VIO_D6_SCIF1_RXD, 0, 0, PTA6_IN,
- VIO_D5_SCIF1_TXD, PTA5_OUT, 0, PTA5_IN,
- VIO_D4, 0, 0, PTA4_IN,
- VIO_D3, 0, 0, PTA3_IN,
- VIO_D2, 0, 0, PTA2_IN,
- VIO_D1, 0, 0, PTA1_IN,
- VIO_D0_LCDLCLK, 0, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- HPD55, PTB7_OUT, 0, PTB7_IN,
- HPD54, PTB6_OUT, 0, PTB6_IN,
- HPD53, PTB5_OUT, 0, PTB5_IN,
- HPD52, PTB4_OUT, 0, PTB4_IN,
- HPD51, PTB3_OUT, 0, PTB3_IN,
- HPD50, PTB2_OUT, 0, PTB2_IN,
- HPD49, PTB1_OUT, 0, PTB1_IN,
- HPD48, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PCCR", 0xa4050104, 16,
- GROUP(2, -2, 2, 2, 2, 2, -2, 2),
- GROUP(
- 0, 0, 0, PTC7_IN,
- /* RESERVED [2] */
- IOIS16, 0, 0, PTC5_IN,
- HPDQM7, PTC4_OUT, 0, PTC4_IN,
- HPDQM6, PTC3_OUT, 0, PTC3_IN,
- HPDQM5, PTC2_OUT, 0, PTC2_IN,
- /* RESERVED [2] */
- HPDQM4, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- SDHICD, 0, 0, PTD7_IN,
- SDHIWP, PTD6_OUT, 0, PTD6_IN,
- SDHID3, PTD5_OUT, 0, PTD5_IN,
- IRQ2_SDHID2, PTD4_OUT, 0, PTD4_IN,
- SDHID1, PTD3_OUT, 0, PTD3_IN,
- SDHID0, PTD2_OUT, 0, PTD2_IN,
- SDHICMD, PTD1_OUT, 0, PTD1_IN,
- SDHICLK, PTD0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(2, 2, 2, 2, -4, 2, 2),
- GROUP(
- A25, PTE7_OUT, 0, PTE7_IN,
- A24, PTE6_OUT, 0, PTE6_IN,
- A23, PTE5_OUT, 0, PTE5_IN,
- A22, PTE4_OUT, 0, PTE4_IN,
- /* RESERVED [4] */
- IRQ5, PTE1_OUT, 0, PTE1_IN,
- IRQ4_BS, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6, PTF6_OUT, 0, PTF6_IN,
- SIOSCK_SIUBOBT, PTF5_OUT, 0, PTF5_IN,
- SIOSTRB1_SIUBOLR, PTF4_OUT, 0, PTF4_IN,
- SIOSTRB0_SIUBIBT, PTF3_OUT, 0, PTF3_IN,
- SIOD_SIUBILR, PTF2_OUT, 0, PTF2_IN,
- SIORXD_SIUBISLD, 0, 0, PTF1_IN,
- SIOTXD_SIUBOSLD, PTF0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- AUDSYNC, PTG4_OUT, 0, 0,
- AUDATA3, PTG3_OUT, 0, 0,
- AUDATA2, PTG2_OUT, 0, 0,
- AUDATA1, PTG1_OUT, 0, 0,
- AUDATA0, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- LCDVCPWC_LCDVCPWC2, PTH7_OUT, 0, 0,
- LCDVSYN2_DACK, PTH6_OUT, 0, PTH6_IN,
- LCDVSYN, PTH5_OUT, 0, PTH5_IN,
- LCDDISP_LCDRS, PTH4_OUT, 0, 0,
- LCDHSYN_LCDCS, PTH3_OUT, 0, 0,
- LCDDON_LCDDON2, PTH2_OUT, 0, 0,
- LCDD17_DV_HSYNC, PTH1_OUT, 0, PTH1_IN,
- LCDD16_DV_VSYNC, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, 2, 2, -6, 2, 2),
- GROUP(
- STATUS0, PTJ7_OUT, 0, 0,
- 0, PTJ6_OUT, 0, 0,
- PDSTATUS, PTJ5_OUT, 0, 0,
- /* RESERVED [6] */
- IRQ1, PTJ1_OUT, 0, PTJ1_IN,
- IRQ0, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIUAILR_SIOF1_SS2, PTK6_OUT, 0, PTK6_IN,
- SIUAIBT_SIOF1_SS1, PTK5_OUT, 0, PTK5_IN,
- SIUAOLR_SIOF1_SYNC, PTK4_OUT, 0, PTK4_IN,
- SIUAOBT_SIOF1_SCK, PTK3_OUT, 0, PTK3_IN,
- SIUAISLD_SIOF1_RXD, 0, 0, PTK2_IN,
- SIUAOSLD_SIOF1_TXD, PTK1_OUT, 0, 0,
- PTK0, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- LCDD15_DV_D15, PTL7_OUT, 0, PTL7_IN,
- LCDD14_DV_D14, PTL6_OUT, 0, PTL6_IN,
- LCDD13_DV_D13, PTL5_OUT, 0, PTL5_IN,
- LCDD12_DV_D12, PTL4_OUT, 0, PTL4_IN,
- LCDD11_DV_D11, PTL3_OUT, 0, PTL3_IN,
- LCDD10_DV_D10, PTL2_OUT, 0, PTL2_IN,
- LCDD9_DV_D9, PTL1_OUT, 0, PTL1_IN,
- LCDD8_DV_D8, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- LCDD7_DV_D7, PTM7_OUT, 0, PTM7_IN,
- LCDD6_DV_D6, PTM6_OUT, 0, PTM6_IN,
- LCDD5_DV_D5, PTM5_OUT, 0, PTM5_IN,
- LCDD4_DV_D4, PTM4_OUT, 0, PTM4_IN,
- LCDD3_DV_D3, PTM3_OUT, 0, PTM3_IN,
- LCDD2_DV_D2, PTM2_OUT, 0, PTM2_IN,
- LCDD1_DV_D1, PTM1_OUT, 0, PTM1_IN,
- LCDD0_DV_D0, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- HPD63, PTN7_OUT, 0, PTN7_IN,
- HPD62, PTN6_OUT, 0, PTN6_IN,
- HPD61, PTN5_OUT, 0, PTN5_IN,
- HPD60, PTN4_OUT, 0, PTN4_IN,
- HPD59, PTN3_OUT, 0, PTN3_IN,
- HPD58, PTN2_OUT, 0, PTN2_IN,
- HPD57, PTN1_OUT, 0, PTN1_IN,
- HPD56, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIOF0_SS2_SIM_RST, PTQ6_OUT, 0, 0,
- SIOF0_SS1_TS_SPSYNC, PTQ5_OUT, 0, PTQ5_IN,
- SIOF0_SYNC_TS_SDEN, PTQ4_OUT, 0, PTQ4_IN,
- SIOF0_SCK_TS_SCK, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2, 0, 0, PTQ2_IN,
- PTQ1, PTQ1_OUT, 0, 0,
- PTQ0, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- LCDRD, PTR4_OUT, 0, 0,
- CS6B_CE1B_LCDCS2, PTR3_OUT, 0, 0,
- WAIT, 0, 0, PTR2_IN,
- LCDDCK_LCDWR, PTR1_OUT, 0, 0,
- LCDVEPWC_LCDVEPWC2, PTR0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- SCIF0_CTS_SIUAISPD, 0, 0, PTS4_IN,
- SCIF0_RTS_SIUAOSPD, PTS3_OUT, 0, 0,
- SCIF0_SCK_TPUTO, PTS2_OUT, 0, PTS2_IN,
- SCIF0_RXD, 0, 0, PTS1_IN,
- SCIF0_TXD, PTS0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- FOE_VIO_VD2, PTT4_OUT, 0, PTT4_IN,
- FWE, PTT3_OUT, 0, PTT3_IN,
- FSC, PTT2_OUT, 0, PTT2_IN,
- DREQ0, 0, 0, PTT1_IN,
- FCDE, PTT0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF2_VIO_D10, PTU4_OUT, 0, PTU4_IN,
- NAF1_VIO_D9, PTU3_OUT, 0, PTU3_IN,
- NAF0_VIO_D8, PTU2_OUT, 0, PTU2_IN,
- FRB_VIO_CLK2, 0, 0, PTU1_IN,
- FCE_VIO_HD2, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050144, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF7_VIO_D15, PTV4_OUT, 0, PTV4_IN,
- NAF6_VIO_D14, PTV3_OUT, 0, PTV3_IN,
- NAF5_VIO_D13, PTV2_OUT, 0, PTV2_IN,
- NAF4_VIO_D12, PTV1_OUT, 0, PTV1_IN,
- NAF3_VIO_D11, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- 0, 0, 0, 0,
- VIO_FLD_SCIF2_CTS, 0, 0, PTW6_IN,
- VIO_CKO_SCIF2_RTS, PTW5_OUT, 0, 0,
- VIO_STEX_SCIF2_SCK, PTW4_OUT, 0, PTW4_IN,
- VIO_STEM_SCIF2_TXD, PTW3_OUT, 0, PTW3_IN,
- VIO_HD_SCIF2_RXD, PTW2_OUT, 0, PTW2_IN,
- VIO_VD_SCIF1_CTS, PTW1_OUT, 0, PTW1_IN,
- VIO_CLK_SCIF1_RTS, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- 0, 0, 0, 0,
- CS6A_CE2B, PTX6_OUT, 0, PTX6_IN,
- LCDD23, PTX5_OUT, 0, PTX5_IN,
- LCDD22, PTX4_OUT, 0, PTX4_IN,
- LCDD21, PTX3_OUT, 0, PTX3_IN,
- LCDD20, PTX2_OUT, 0, PTX2_IN,
- LCDD19_DV_CLKI, PTX1_OUT, 0, PTX1_IN,
- LCDD18_DV_CLK, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PYCR", 0xa405014a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- KEYOUT5_IN5, PTY5_OUT, 0, PTY5_IN,
- KEYOUT4_IN6, PTY4_OUT, 0, PTY4_IN,
- KEYOUT3, PTY3_OUT, 0, PTY3_IN,
- KEYOUT2, PTY2_OUT, 0, PTY2_IN,
- KEYOUT1, PTY1_OUT, 0, 0,
- KEYOUT0, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PZCR", 0xa405014c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, -2),
- GROUP(
- /* RESERVED [4] */
- KEYIN4_IRQ7, 0, 0, PTZ5_IN,
- KEYIN3, 0, 0, PTZ4_IN,
- KEYIN2, 0, 0, PTZ3_IN,
- KEYIN1, 0, 0, PTZ2_IN,
- KEYIN0_IRQ6, 0, 0, PTZ1_IN,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(1, 1, -4, 1, -4, 1, -4),
- GROUP(
- PSA15_KEYIN0, PSA15_IRQ6,
- PSA14_KEYIN4, PSA14_IRQ7,
- /* RESERVED [4] */
- PSA9_IRQ4, PSA9_BS,
- /* RESERVED [4] */
- PSA4_IRQ2, PSA4_SDHID2,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- PSB15_SIOTXD, PSB15_SIUBOSLD,
- PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR,
- PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR,
- PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB,
- PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT,
- PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK,
- PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC,
- PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK,
- PSB0_SIUAOSLD, PSB0_SIOF1_TXD ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(1, 1, 1, 1, 1, -10, 1),
- GROUP(
- PSC15_SIUAISLD, PSC15_SIOF1_RXD,
- PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC,
- PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2,
- /* RESERVED [10] */
- PSC0_NAF, PSC0_VIO ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- 0, 0,
- 0, 0,
- PSD13_VIO, PSD13_SCIF2,
- PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1,
- PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB,
- PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD,
- PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- 0, 0,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2,
- 0, 0,
- PSD0_LCDD19_LCDD0, PSD0_DV ))
- },
- { PINMUX_CFG_REG_VAR("PSELE", 0xa4050156, 16,
- GROUP(1, 1, 1, 1, 1, -7, 1, 1, 1, 1),
- GROUP(
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT,
- PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- /* RESERVED [7] */
- PSE3_FLCTL, PSE3_VIO,
- PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9,
- PSE0_NAF0, PSE0_VIO_D8 ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRA", 0xa4050158, 16,
- GROUP(-1, 1, -3, 1, 1, 1, 1, 1, -6),
- GROUP(
- /* RESERVED [1] */
- HIZA14_KEYSC, HIZA14_HIZ,
- /* RESERVED [3] */
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRB", 0xa405015a, 16,
- GROUP(-11, 1, -2, 1, 1),
- GROUP(
- /* RESERVED [11] */
- HIZB4_SIUA, HIZB4_HIZ,
- /* RESERVED [2] */
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRC", 0xa405015c, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("MSELCRB", 0xa4050182, 16,
- GROUP(-6, 1, 1, -8),
- GROUP(
- /* RESERVED [6] */
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, 0, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, 0, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- 0, 0, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, 0, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- 0, 0, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- 0, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- 0, 0, 0, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- 0, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- 0, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- 0, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- 0, 0, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7722_pinmux_info = {
- .name = "sh7722_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7723.c b/drivers/pinctrl/renesas/pfc-sh7723.c
deleted file mode 100644
index 95344281966e6e..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7723.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7723.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE5_DATA, PTE4_DATA, PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ5_DATA, PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT5_DATA, PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU5_DATA, PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE5_IN, PTE4_IN, PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT5_IN, PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU5_IN, PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE5_OUT, PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ5_OUT, PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT5_OUT, PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU5_OUT, PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE5_FN, PTE4_FN, PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN, PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ5_FN, PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT5_FN, PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU5_FN, PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_PSA14_FN1, PSA15_PSA14_FN2,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2,
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2,
- PSB15_PSB14_FN1, PSB15_PSB14_FN2,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS,
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2,
- PSC15_PSC14_FN1, PSC15_PSC14_FN2,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3,
- PSD15_PSD14_FN1, PSD15_PSD14_FN2,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_PTT_TXD_MARK, SCIF0_PTT_RXD_MARK,
- SCIF0_PTT_SCK_MARK, SCIF0_PTU_TXD_MARK,
- SCIF0_PTU_RXD_MARK, SCIF0_PTU_SCK_MARK,
-
- SCIF1_PTS_TXD_MARK, SCIF1_PTS_RXD_MARK,
- SCIF1_PTS_SCK_MARK, SCIF1_PTV_TXD_MARK,
- SCIF1_PTV_RXD_MARK, SCIF1_PTV_SCK_MARK,
-
- SCIF2_PTT_TXD_MARK, SCIF2_PTT_RXD_MARK,
- SCIF2_PTT_SCK_MARK, SCIF2_PTU_TXD_MARK,
- SCIF2_PTU_RXD_MARK, SCIF2_PTU_SCK_MARK,
-
- SCIF3_PTS_TXD_MARK, SCIF3_PTS_RXD_MARK,
- SCIF3_PTS_SCK_MARK, SCIF3_PTS_RTS_MARK,
- SCIF3_PTS_CTS_MARK, SCIF3_PTV_TXD_MARK,
- SCIF3_PTV_RXD_MARK, SCIF3_PTV_SCK_MARK,
- SCIF3_PTV_RTS_MARK, SCIF3_PTV_CTS_MARK,
-
- SCIF4_PTE_TXD_MARK, SCIF4_PTE_RXD_MARK,
- SCIF4_PTE_SCK_MARK, SCIF4_PTN_TXD_MARK,
- SCIF4_PTN_RXD_MARK, SCIF4_PTN_SCK_MARK,
-
- SCIF5_PTE_TXD_MARK, SCIF5_PTE_RXD_MARK,
- SCIF5_PTE_SCK_MARK, SCIF5_PTN_TXD_MARK,
- SCIF5_PTN_RXD_MARK, SCIF5_PTN_SCK_MARK,
-
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_FLD_MARK, VIO_CKO_MARK,
- VIO_VD1_MARK, VIO_HD1_MARK, VIO_CLK1_MARK,
- VIO_HD2_MARK, VIO_VD2_MARK, VIO_CLK2_MARK,
-
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDLCLK_PTR_MARK, LCDLCLK_PTW_MARK,
-
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
-
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK,
-
- SDHI0CD_PTD_MARK, SDHI0WP_PTD_MARK,
- SDHI0D3_PTD_MARK, SDHI0D2_PTD_MARK,
- SDHI0D1_PTD_MARK, SDHI0D0_PTD_MARK,
- SDHI0CMD_PTD_MARK, SDHI0CLK_PTD_MARK,
-
- SDHI0CD_PTS_MARK, SDHI0WP_PTS_MARK,
- SDHI0D3_PTS_MARK, SDHI0D2_PTS_MARK,
- SDHI0D1_PTS_MARK, SDHI0D0_PTS_MARK,
- SDHI0CMD_PTS_MARK, SDHI0CLK_PTS_MARK,
-
- SDHI1CD_MARK, SDHI1WP_MARK, SDHI1D3_MARK, SDHI1D2_MARK,
- SDHI1D1_MARK, SDHI1D0_MARK, SDHI1CMD_MARK, SDHI1CLK_MARK,
-
- SIUAFCK_MARK, SIUAILR_MARK, SIUAIBT_MARK, SIUAISLD_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAOSLD_MARK, SIUAMCK_MARK,
- SIUAISPD_MARK, SIUAOSPD_MARK,
-
- SIUBFCK_MARK, SIUBILR_MARK, SIUBIBT_MARK, SIUBISLD_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBOSLD_MARK, SIUBMCK_MARK,
-
- IRDA_IN_MARK, IRDA_OUT_MARK,
-
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
-
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
-
- MSIOF0_PTF_TXD_MARK, MSIOF0_PTF_RXD_MARK, MSIOF0_PTF_MCK_MARK,
- MSIOF0_PTF_TSYNC_MARK, MSIOF0_PTF_TSCK_MARK, MSIOF0_PTF_RSYNC_MARK,
- MSIOF0_PTF_RSCK_MARK, MSIOF0_PTF_SS1_MARK, MSIOF0_PTF_SS2_MARK,
-
- MSIOF0_PTT_TXD_MARK, MSIOF0_PTT_RXD_MARK, MSIOF0_PTX_MCK_MARK,
- MSIOF0_PTT_TSYNC_MARK, MSIOF0_PTT_TSCK_MARK, MSIOF0_PTT_RSYNC_MARK,
- MSIOF0_PTT_RSCK_MARK, MSIOF0_PTT_SS1_MARK, MSIOF0_PTT_SS2_MARK,
-
- MSIOF1_TXD_MARK, MSIOF1_RXD_MARK, MSIOF1_MCK_MARK,
- MSIOF1_TSYNC_MARK, MSIOF1_TSCK_MARK, MSIOF1_RSYNC_MARK,
- MSIOF1_RSCK_MARK, MSIOF1_SS1_MARK, MSIOF1_SS2_MARK,
-
- TS0_SDAT_MARK, TS0_SCK_MARK, TS0_SDEN_MARK, TS0_SPSYNC_MARK,
-
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
-
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
-
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
-
- STATUS0_MARK, PDSTATUS_MARK,
-
- TPUTO3_MARK, TPUTO2_MARK, TPUTO1_MARK, TPUTO0_MARK,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, WAIT_MARK, BS_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- CS6B_CE1B_MARK, CS6A_CE2B_MARK,
- CS5B_CE1A_MARK, CS5A_CE2A_MARK,
- WE3_ICIOWR_MARK, WE2_ICIORD_MARK,
-
- IDED15_MARK, IDED14_MARK, IDED13_MARK, IDED12_MARK,
- IDED11_MARK, IDED10_MARK, IDED9_MARK, IDED8_MARK,
- IDED7_MARK, IDED6_MARK, IDED5_MARK, IDED4_MARK,
- IDED3_MARK, IDED2_MARK, IDED1_MARK, IDED0_MARK,
- DIRECTION_MARK, EXBUF_ENB_MARK, IDERST_MARK, IODACK_MARK,
- IODREQ_MARK, IDEIORDY_MARK, IDEINT_MARK, IDEIOWR_MARK,
- IDEIORD_MARK, IDECS1_MARK, IDECS0_MARK, IDEA2_MARK,
- IDEA1_MARK, IDEA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_PSA14_FN1, PTA7_FN),
- PINMUX_DATA(KEYOUT2_MARK, PSA15_PSA14_FN2, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_PSA14_FN1, PTA6_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_PSA14_FN2, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_PSA14_FN1, PTA5_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_PSA14_FN2, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_PSA14_FN1, PTA4_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_PSA14_FN2, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_PSA14_FN1, PTA3_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_PSA14_FN2, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_PSA14_FN1, PTA2_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_PSA14_FN2, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_PSA14_FN1, PTA1_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_PSA14_FN2, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_PSA14_FN1, PTA0_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_PSA14_FN2, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_PSA14_FN1, PTB2_FN),
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_PSA14_FN2, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_PSA14_FN1, PTB1_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_PSA14_FN2, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_PSA14_FN1, PTB0_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_PSA14_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IDED15_MARK, PSA11_PSA10_FN1, PTC7_FN),
- PINMUX_DATA(SDHI1CD_MARK, PSA11_PSA10_FN2, PTC7_FN),
- PINMUX_DATA(IDED14_MARK, PSA11_PSA10_FN1, PTC6_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSA11_PSA10_FN2, PTC6_FN),
- PINMUX_DATA(IDED13_MARK, PSA11_PSA10_FN1, PTC5_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSA11_PSA10_FN2, PTC5_FN),
- PINMUX_DATA(IDED12_MARK, PSA11_PSA10_FN1, PTC4_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSA11_PSA10_FN2, PTC4_FN),
- PINMUX_DATA(IDED11_MARK, PSA11_PSA10_FN1, PTC3_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA11_PSA10_FN2, PTC3_FN),
- PINMUX_DATA(IDED10_MARK, PSA11_PSA10_FN1, PTC2_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA11_PSA10_FN2, PTC2_FN),
- PINMUX_DATA(IDED9_MARK, PSA11_PSA10_FN1, PTC1_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA11_PSA10_FN2, PTC1_FN),
- PINMUX_DATA(IDED8_MARK, PSA11_PSA10_FN1, PTC0_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA11_PSA10_FN2, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(IDED7_MARK, PSA11_PSA10_FN1, PTD7_FN),
- PINMUX_DATA(SDHI0CD_PTD_MARK, PSA11_PSA10_FN2, PTD7_FN),
- PINMUX_DATA(IDED6_MARK, PSA11_PSA10_FN1, PTD6_FN),
- PINMUX_DATA(SDHI0WP_PTD_MARK, PSA11_PSA10_FN2, PTD6_FN),
- PINMUX_DATA(IDED5_MARK, PSA11_PSA10_FN1, PTD5_FN),
- PINMUX_DATA(SDHI0D3_PTD_MARK, PSA11_PSA10_FN2, PTD5_FN),
- PINMUX_DATA(IDED4_MARK, PSA11_PSA10_FN1, PTD4_FN),
- PINMUX_DATA(SDHI0D2_PTD_MARK, PSA11_PSA10_FN2, PTD4_FN),
- PINMUX_DATA(IDED3_MARK, PSA11_PSA10_FN1, PTD3_FN),
- PINMUX_DATA(SDHI0D1_PTD_MARK, PSA11_PSA10_FN2, PTD3_FN),
- PINMUX_DATA(IDED2_MARK, PSA11_PSA10_FN1, PTD2_FN),
- PINMUX_DATA(SDHI0D0_PTD_MARK, PSA11_PSA10_FN2, PTD2_FN),
- PINMUX_DATA(IDED1_MARK, PSA11_PSA10_FN1, PTD1_FN),
- PINMUX_DATA(SDHI0CMD_PTD_MARK, PSA11_PSA10_FN2, PTD1_FN),
- PINMUX_DATA(IDED0_MARK, PSA11_PSA10_FN1, PTD0_FN),
- PINMUX_DATA(SDHI0CLK_PTD_MARK, PSA11_PSA10_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(DIRECTION_MARK, PSA11_PSA10_FN1, PTE5_FN),
- PINMUX_DATA(SCIF5_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE5_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSA11_PSA10_FN1, PTE4_FN),
- PINMUX_DATA(SCIF5_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE4_FN),
- PINMUX_DATA(IDERST_MARK, PSA11_PSA10_FN1, PTE3_FN),
- PINMUX_DATA(SCIF5_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE3_FN),
- PINMUX_DATA(IODACK_MARK, PSA11_PSA10_FN1, PTE2_FN),
- PINMUX_DATA(SCIF4_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE2_FN),
- PINMUX_DATA(IODREQ_MARK, PSA11_PSA10_FN1, PTE1_FN),
- PINMUX_DATA(SCIF4_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE1_FN),
- PINMUX_DATA(IDEIORDY_MARK, PSA11_PSA10_FN1, PTE0_FN),
- PINMUX_DATA(SCIF4_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(IDEINT_MARK, PTF7_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA5_PSA4_FN1, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_SS2_MARK, PSA5_PSA4_FN2, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_RSYNC_MARK, PSA5_PSA4_FN3, PTF6_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA5_PSA4_FN1, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_SS1_MARK, PSA5_PSA4_FN2, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_RSCK_MARK, PSA5_PSA4_FN3, PTF5_FN),
- PINMUX_DATA(IDECS1_MARK, PSA11_PSA10_FN1, PTF4_FN),
- PINMUX_DATA(MSIOF0_PTF_TSYNC_MARK, PSA11_PSA10_FN2, PTF4_FN),
- PINMUX_DATA(IDECS0_MARK, PSA11_PSA10_FN1, PTF3_FN),
- PINMUX_DATA(MSIOF0_PTF_TSCK_MARK, PSA11_PSA10_FN2, PTF3_FN),
- PINMUX_DATA(IDEA2_MARK, PSA11_PSA10_FN1, PTF2_FN),
- PINMUX_DATA(MSIOF0_PTF_RXD_MARK, PSA11_PSA10_FN2, PTF2_FN),
- PINMUX_DATA(IDEA1_MARK, PSA11_PSA10_FN1, PTF1_FN),
- PINMUX_DATA(MSIOF0_PTF_TXD_MARK, PSA11_PSA10_FN2, PTF1_FN),
- PINMUX_DATA(IDEA0_MARK, PSA11_PSA10_FN1, PTF0_FN),
- PINMUX_DATA(MSIOF0_PTF_MCK_MARK, PSA11_PSA10_FN2, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PSA3_PSA2_FN1, PTG3_FN),
- PINMUX_DATA(TPUTO3_MARK, PSA3_PSA2_FN2, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PSA3_PSA2_FN1, PTG2_FN),
- PINMUX_DATA(TPUTO2_MARK, PSA3_PSA2_FN2, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PSA3_PSA2_FN1, PTG1_FN),
- PINMUX_DATA(TPUTO1_MARK, PSA3_PSA2_FN2, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PSA3_PSA2_FN1, PTG0_FN),
- PINMUX_DATA(TPUTO0_MARK, PSA3_PSA2_FN2, PTG0_FN),
-
- /* PTG FN */
- PINMUX_DATA(LCDVCPWC_MARK, PTH7_FN),
- PINMUX_DATA(LCDRD_MARK, PSB15_PSB14_FN1, PTH6_FN),
- PINMUX_DATA(DV_CLKI_MARK, PSB15_PSB14_FN2, PTH6_FN),
- PINMUX_DATA(LCDVSYN_MARK, PSB15_PSB14_FN1, PTH5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSB15_PSB14_FN2, PTH5_FN),
- PINMUX_DATA(LCDDISP_MARK, PSB13_PSB12_LCDC_RGB, PTH4_FN),
- PINMUX_DATA(LCDRS_MARK, PSB13_PSB12_LCDC_SYS, PTH4_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSB13_PSB12_LCDC_RGB, PTH3_FN),
- PINMUX_DATA(LCDCS_MARK, PSB13_PSB12_LCDC_SYS, PTH3_FN),
- PINMUX_DATA(LCDDON_MARK, PTH2_FN),
- PINMUX_DATA(LCDDCK_MARK, PSB13_PSB12_LCDC_RGB, PTH1_FN),
- PINMUX_DATA(LCDWR_MARK, PSB13_PSB12_LCDC_SYS, PTH1_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(STATUS0_MARK, PTJ7_FN),
- PINMUX_DATA(PDSTATUS_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(SIUAFCK_MARK, PTK7_FN),
- PINMUX_DATA(SIUAILR_MARK, PSB9_PSB8_FN1, PTK6_FN),
- PINMUX_DATA(MSIOF1_SS2_MARK, PSB9_PSB8_FN2, PTK6_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSB9_PSB8_FN3, PTK6_FN),
- PINMUX_DATA(SIUAIBT_MARK, PSB9_PSB8_FN1, PTK5_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSB9_PSB8_FN2, PTK5_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSB9_PSB8_FN3, PTK5_FN),
- PINMUX_DATA(SIUAISLD_MARK, PSB7_PSB6_FN1, PTK4_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK4_FN),
- PINMUX_DATA(SIUAOLR_MARK, PSB7_PSB6_FN1, PTK3_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSB7_PSB6_FN2, PTK3_FN),
- PINMUX_DATA(SIUAOBT_MARK, PSB7_PSB6_FN1, PTK2_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSB7_PSB6_FN2, PTK2_FN),
- PINMUX_DATA(SIUAOSLD_MARK, PSB7_PSB6_FN1, PTK1_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK1_FN),
- PINMUX_DATA(SIUAMCK_MARK, PSB7_PSB6_FN1, PTK0_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSB7_PSB6_FN2, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(LCDD15_MARK, PSB5_PSB4_FN1, PTL7_FN),
- PINMUX_DATA(DV_D15_MARK, PSB5_PSB4_FN2, PTL7_FN),
- PINMUX_DATA(LCDD14_MARK, PSB5_PSB4_FN1, PTL6_FN),
- PINMUX_DATA(DV_D14_MARK, PSB5_PSB4_FN2, PTL6_FN),
- PINMUX_DATA(LCDD13_MARK, PSB5_PSB4_FN1, PTL5_FN),
- PINMUX_DATA(DV_D13_MARK, PSB5_PSB4_FN2, PTL5_FN),
- PINMUX_DATA(LCDD12_MARK, PSB5_PSB4_FN1, PTL4_FN),
- PINMUX_DATA(DV_D12_MARK, PSB5_PSB4_FN2, PTL4_FN),
- PINMUX_DATA(LCDD11_MARK, PSB5_PSB4_FN1, PTL3_FN),
- PINMUX_DATA(DV_D11_MARK, PSB5_PSB4_FN2, PTL3_FN),
- PINMUX_DATA(LCDD10_MARK, PSB5_PSB4_FN1, PTL2_FN),
- PINMUX_DATA(DV_D10_MARK, PSB5_PSB4_FN2, PTL2_FN),
- PINMUX_DATA(LCDD9_MARK, PSB5_PSB4_FN1, PTL1_FN),
- PINMUX_DATA(DV_D9_MARK, PSB5_PSB4_FN2, PTL1_FN),
- PINMUX_DATA(LCDD8_MARK, PSB5_PSB4_FN1, PTL0_FN),
- PINMUX_DATA(DV_D8_MARK, PSB5_PSB4_FN2, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(LCDD7_MARK, PSB5_PSB4_FN1, PTM7_FN),
- PINMUX_DATA(DV_D7_MARK, PSB5_PSB4_FN2, PTM7_FN),
- PINMUX_DATA(LCDD6_MARK, PSB5_PSB4_FN1, PTM6_FN),
- PINMUX_DATA(DV_D6_MARK, PSB5_PSB4_FN2, PTM6_FN),
- PINMUX_DATA(LCDD5_MARK, PSB5_PSB4_FN1, PTM5_FN),
- PINMUX_DATA(DV_D5_MARK, PSB5_PSB4_FN2, PTM5_FN),
- PINMUX_DATA(LCDD4_MARK, PSB5_PSB4_FN1, PTM4_FN),
- PINMUX_DATA(DV_D4_MARK, PSB5_PSB4_FN2, PTM4_FN),
- PINMUX_DATA(LCDD3_MARK, PSB5_PSB4_FN1, PTM3_FN),
- PINMUX_DATA(DV_D3_MARK, PSB5_PSB4_FN2, PTM3_FN),
- PINMUX_DATA(LCDD2_MARK, PSB5_PSB4_FN1, PTM2_FN),
- PINMUX_DATA(DV_D2_MARK, PSB5_PSB4_FN2, PTM2_FN),
- PINMUX_DATA(LCDD1_MARK, PSB5_PSB4_FN1, PTM1_FN),
- PINMUX_DATA(DV_D1_MARK, PSB5_PSB4_FN2, PTM1_FN),
- PINMUX_DATA(LCDD0_MARK, PSB5_PSB4_FN1, PTM0_FN),
- PINMUX_DATA(DV_D0_MARK, PSB5_PSB4_FN2, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(LCDD23_MARK, PSB3_PSB2_FN1, PTN7_FN),
- PINMUX_DATA(SCIF5_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN7_FN),
- PINMUX_DATA(LCDD22_MARK, PSB3_PSB2_FN1, PTN6_FN),
- PINMUX_DATA(SCIF5_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN6_FN),
- PINMUX_DATA(LCDD21_MARK, PSB3_PSB2_FN1, PTN5_FN),
- PINMUX_DATA(SCIF5_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN5_FN),
- PINMUX_DATA(LCDD20_MARK, PSB3_PSB2_FN1, PTN4_FN),
- PINMUX_DATA(SCIF4_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN4_FN),
- PINMUX_DATA(LCDD19_MARK, PSB3_PSB2_FN1, PTN3_FN),
- PINMUX_DATA(SCIF4_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN3_FN),
- PINMUX_DATA(LCDD18_MARK, PSB3_PSB2_FN1, PTN2_FN),
- PINMUX_DATA(SCIF4_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN2_FN),
- PINMUX_DATA(LCDD17_MARK, PSB5_PSB4_FN1, PTN1_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSB5_PSB4_FN2, PTN1_FN),
- PINMUX_DATA(LCDD16_MARK, PSB5_PSB4_FN1, PTN0_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_PSB4_FN2, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(AN3_MARK, PTQ3_FN),
- PINMUX_DATA(AN2_MARK, PTQ2_FN),
- PINMUX_DATA(AN1_MARK, PTQ1_FN),
- PINMUX_DATA(AN0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA13_PSA12_FN1, PTR3_FN),
- PINMUX_DATA(LCDLCLK_PTR_MARK, PSA13_PSA12_FN2, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SCIF1_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS7_FN),
- PINMUX_DATA(SDHI0CD_PTS_MARK, PSC15_PSC14_FN2, PTS7_FN),
- PINMUX_DATA(SCIF1_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS6_FN),
- PINMUX_DATA(SDHI0WP_PTS_MARK, PSC15_PSC14_FN2, PTS6_FN),
- PINMUX_DATA(SCIF1_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS5_FN),
- PINMUX_DATA(SDHI0D3_PTS_MARK, PSC15_PSC14_FN2, PTS5_FN),
- PINMUX_DATA(SCIF3_PTS_CTS_MARK, PSC15_PSC14_FN1, PTS4_FN),
- PINMUX_DATA(SDHI0D2_PTS_MARK, PSC15_PSC14_FN2, PTS4_FN),
- PINMUX_DATA(SCIF3_PTS_RTS_MARK, PSC15_PSC14_FN1, PTS3_FN),
- PINMUX_DATA(SDHI0D1_PTS_MARK, PSC15_PSC14_FN2, PTS3_FN),
- PINMUX_DATA(SCIF3_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS2_FN),
- PINMUX_DATA(SDHI0D0_PTS_MARK, PSC15_PSC14_FN2, PTS2_FN),
- PINMUX_DATA(SCIF3_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS1_FN),
- PINMUX_DATA(SDHI0CMD_PTS_MARK, PSC15_PSC14_FN2, PTS1_FN),
- PINMUX_DATA(SCIF3_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS0_FN),
- PINMUX_DATA(SDHI0CLK_PTS_MARK, PSC15_PSC14_FN2, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_PTT_SCK_MARK, PSC13_PSC12_FN1, PTT5_FN),
- PINMUX_DATA(MSIOF0_PTT_TSCK_MARK, PSC13_PSC12_FN2, PTT5_FN),
- PINMUX_DATA(SCIF0_PTT_RXD_MARK, PSC13_PSC12_FN1, PTT4_FN),
- PINMUX_DATA(MSIOF0_PTT_RXD_MARK, PSC13_PSC12_FN2, PTT4_FN),
- PINMUX_DATA(SCIF0_PTT_TXD_MARK, PSC13_PSC12_FN1, PTT3_FN),
- PINMUX_DATA(MSIOF0_PTT_TXD_MARK, PSC13_PSC12_FN2, PTT3_FN),
- PINMUX_DATA(SCIF2_PTT_SCK_MARK, PSC11_PSC10_FN1, PTT2_FN),
- PINMUX_DATA(MSIOF0_PTT_TSYNC_MARK, PSC11_PSC10_FN2, PTT2_FN),
- PINMUX_DATA(SCIF2_PTT_RXD_MARK, PSC11_PSC10_FN1, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_SS1_MARK, PSC11_PSC10_FN2, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_RSCK_MARK, PSC11_PSC10_FN3, PTT1_FN),
- PINMUX_DATA(SCIF2_PTT_TXD_MARK, PSC11_PSC10_FN1, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_SS2_MARK, PSC11_PSC10_FN2, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_RSYNC_MARK, PSC11_PSC10_FN3, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(FCDE_MARK, PSC9_PSC8_FN1, PTU5_FN),
- PINMUX_DATA(SCIF0_PTU_SCK_MARK, PSC9_PSC8_FN2, PTU5_FN),
- PINMUX_DATA(FSC_MARK, PSC9_PSC8_FN1, PTU4_FN),
- PINMUX_DATA(SCIF0_PTU_RXD_MARK, PSC9_PSC8_FN2, PTU4_FN),
- PINMUX_DATA(FWE_MARK, PSC9_PSC8_FN1, PTU3_FN),
- PINMUX_DATA(SCIF0_PTU_TXD_MARK, PSC9_PSC8_FN2, PTU3_FN),
- PINMUX_DATA(FOE_MARK, PSC7_PSC6_FN1, PTU2_FN),
- PINMUX_DATA(SCIF2_PTU_SCK_MARK, PSC7_PSC6_FN2, PTU2_FN),
- PINMUX_DATA(VIO_VD2_MARK, PSC7_PSC6_FN3, PTU2_FN),
- PINMUX_DATA(FRB_MARK, PSC7_PSC6_FN1, PTU1_FN),
- PINMUX_DATA(SCIF2_PTU_RXD_MARK, PSC7_PSC6_FN2, PTU1_FN),
- PINMUX_DATA(VIO_CLK2_MARK, PSC7_PSC6_FN3, PTU1_FN),
- PINMUX_DATA(FCE_MARK, PSC7_PSC6_FN1, PTU0_FN),
- PINMUX_DATA(SCIF2_PTU_TXD_MARK, PSC7_PSC6_FN2, PTU0_FN),
- PINMUX_DATA(VIO_HD2_MARK, PSC7_PSC6_FN3, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(NAF7_MARK, PSC7_PSC6_FN1, PTV7_FN),
- PINMUX_DATA(SCIF1_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV7_FN),
- PINMUX_DATA(VIO_D15_MARK, PSC7_PSC6_FN3, PTV7_FN),
- PINMUX_DATA(NAF6_MARK, PSC7_PSC6_FN1, PTV6_FN),
- PINMUX_DATA(SCIF1_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV6_FN),
- PINMUX_DATA(VIO_D14_MARK, PSC7_PSC6_FN3, PTV6_FN),
- PINMUX_DATA(NAF5_MARK, PSC7_PSC6_FN1, PTV5_FN),
- PINMUX_DATA(SCIF1_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV5_FN),
- PINMUX_DATA(VIO_D13_MARK, PSC7_PSC6_FN3, PTV5_FN),
- PINMUX_DATA(NAF4_MARK, PSC7_PSC6_FN1, PTV4_FN),
- PINMUX_DATA(SCIF3_PTV_CTS_MARK, PSC7_PSC6_FN2, PTV4_FN),
- PINMUX_DATA(VIO_D12_MARK, PSC7_PSC6_FN3, PTV4_FN),
- PINMUX_DATA(NAF3_MARK, PSC7_PSC6_FN1, PTV3_FN),
- PINMUX_DATA(SCIF3_PTV_RTS_MARK, PSC7_PSC6_FN2, PTV3_FN),
- PINMUX_DATA(VIO_D11_MARK, PSC7_PSC6_FN3, PTV3_FN),
- PINMUX_DATA(NAF2_MARK, PSC7_PSC6_FN1, PTV2_FN),
- PINMUX_DATA(SCIF3_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV2_FN),
- PINMUX_DATA(VIO_D10_MARK, PSC7_PSC6_FN3, PTV2_FN),
- PINMUX_DATA(NAF1_MARK, PSC7_PSC6_FN1, PTV1_FN),
- PINMUX_DATA(SCIF3_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV1_FN),
- PINMUX_DATA(VIO_D9_MARK, PSC7_PSC6_FN3, PTV1_FN),
- PINMUX_DATA(NAF0_MARK, PSC7_PSC6_FN1, PTV0_FN),
- PINMUX_DATA(SCIF3_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV0_FN),
- PINMUX_DATA(VIO_D8_MARK, PSC7_PSC6_FN3, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(IRQ7_MARK, PTW7_FN),
- PINMUX_DATA(IRQ6_MARK, PTW6_FN),
- PINMUX_DATA(IRQ5_MARK, PTW5_FN),
- PINMUX_DATA(IRQ4_MARK, PSD15_PSD14_FN1, PTW4_FN),
- PINMUX_DATA(LCDLCLK_PTW_MARK, PSD15_PSD14_FN2, PTW4_FN),
- PINMUX_DATA(IRQ3_MARK, PSD13_PSD12_FN1, PTW3_FN),
- PINMUX_DATA(ADTRG_MARK, PSD13_PSD12_FN2, PTW3_FN),
- PINMUX_DATA(IRQ2_MARK, PSD11_PSD10_FN1, PTW2_FN),
- PINMUX_DATA(BS_MARK, PSD11_PSD10_FN2, PTW2_FN),
- PINMUX_DATA(VIO_CKO_MARK, PSD11_PSD10_FN3, PTW2_FN),
- PINMUX_DATA(IRQ1_MARK, PSD9_PSD8_FN1, PTW1_FN),
- PINMUX_DATA(SIUAISPD_MARK, PSD9_PSD8_FN2, PTW1_FN),
- PINMUX_DATA(IRQ0_MARK, PSD7_PSD6_FN1, PTW0_FN),
- PINMUX_DATA(SIUAOSPD_MARK, PSD7_PSD6_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(DACK1_MARK, PTX7_FN),
- PINMUX_DATA(DREQ1_MARK, PSD3_PSD2_FN1, PTX6_FN),
- PINMUX_DATA(MSIOF0_PTX_MCK_MARK, PSD3_PSD2_FN2, PTX6_FN),
- PINMUX_DATA(DACK1_MARK, PTX5_FN),
- PINMUX_DATA(IRDA_OUT_MARK, PSD5_PSD4_FN2, PTX5_FN),
- PINMUX_DATA(DREQ1_MARK, PTX4_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSD5_PSD4_FN2, PTX4_FN),
- PINMUX_DATA(TS0_SDAT_MARK, PTX3_FN),
- PINMUX_DATA(TS0_SCK_MARK, PTX2_FN),
- PINMUX_DATA(TS0_SDEN_MARK, PTX1_FN),
- PINMUX_DATA(TS0_SPSYNC_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(VIO_D7_MARK, PTY7_FN),
- PINMUX_DATA(VIO_D6_MARK, PTY6_FN),
- PINMUX_DATA(VIO_D5_MARK, PTY5_FN),
- PINMUX_DATA(VIO_D4_MARK, PTY4_FN),
- PINMUX_DATA(VIO_D3_MARK, PTY3_FN),
- PINMUX_DATA(VIO_D2_MARK, PTY2_FN),
- PINMUX_DATA(VIO_D1_MARK, PTY1_FN),
- PINMUX_DATA(VIO_D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(SIUBOBT_MARK, PTZ7_FN),
- PINMUX_DATA(SIUBOLR_MARK, PTZ6_FN),
- PINMUX_DATA(SIUBOSLD_MARK, PTZ5_FN),
- PINMUX_DATA(SIUBMCK_MARK, PTZ4_FN),
- PINMUX_DATA(VIO_FLD_MARK, PSD1_PSD0_FN1, PTZ3_FN),
- PINMUX_DATA(SIUBFCK_MARK, PSD1_PSD0_FN2, PTZ3_FN),
- PINMUX_DATA(VIO_HD1_MARK, PSD1_PSD0_FN1, PTZ2_FN),
- PINMUX_DATA(SIUBILR_MARK, PSD1_PSD0_FN2, PTZ2_FN),
- PINMUX_DATA(VIO_VD1_MARK, PSD1_PSD0_FN1, PTZ1_FN),
- PINMUX_DATA(SIUBIBT_MARK, PSD1_PSD0_FN2, PTZ1_FN),
- PINMUX_DATA(VIO_CLK1_MARK, PSD1_PSD0_FN1, PTZ0_FN),
- PINMUX_DATA(SIUBISLD_MARK, PSD1_PSD0_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_PTT_TXD),
- GPIO_FN(SCIF0_PTT_RXD),
- GPIO_FN(SCIF0_PTT_SCK),
- GPIO_FN(SCIF0_PTU_TXD),
- GPIO_FN(SCIF0_PTU_RXD),
- GPIO_FN(SCIF0_PTU_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_PTS_TXD),
- GPIO_FN(SCIF1_PTS_RXD),
- GPIO_FN(SCIF1_PTS_SCK),
- GPIO_FN(SCIF1_PTV_TXD),
- GPIO_FN(SCIF1_PTV_RXD),
- GPIO_FN(SCIF1_PTV_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_PTT_TXD),
- GPIO_FN(SCIF2_PTT_RXD),
- GPIO_FN(SCIF2_PTT_SCK),
- GPIO_FN(SCIF2_PTU_TXD),
- GPIO_FN(SCIF2_PTU_RXD),
- GPIO_FN(SCIF2_PTU_SCK),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_PTS_TXD),
- GPIO_FN(SCIF3_PTS_RXD),
- GPIO_FN(SCIF3_PTS_SCK),
- GPIO_FN(SCIF3_PTS_RTS),
- GPIO_FN(SCIF3_PTS_CTS),
- GPIO_FN(SCIF3_PTV_TXD),
- GPIO_FN(SCIF3_PTV_RXD),
- GPIO_FN(SCIF3_PTV_SCK),
- GPIO_FN(SCIF3_PTV_RTS),
- GPIO_FN(SCIF3_PTV_CTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_PTE_TXD),
- GPIO_FN(SCIF4_PTE_RXD),
- GPIO_FN(SCIF4_PTE_SCK),
- GPIO_FN(SCIF4_PTN_TXD),
- GPIO_FN(SCIF4_PTN_RXD),
- GPIO_FN(SCIF4_PTN_SCK),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_PTE_TXD),
- GPIO_FN(SCIF5_PTE_RXD),
- GPIO_FN(SCIF5_PTE_SCK),
- GPIO_FN(SCIF5_PTN_TXD),
- GPIO_FN(SCIF5_PTN_RXD),
- GPIO_FN(SCIF5_PTN_SCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK1),
- GPIO_FN(VIO_VD1),
- GPIO_FN(VIO_HD1),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK_PTR),
- GPIO_FN(LCDLCLK_PTW),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* SDHI0 (PTD) */
- GPIO_FN(SDHI0CD_PTD),
- GPIO_FN(SDHI0WP_PTD),
- GPIO_FN(SDHI0D3_PTD),
- GPIO_FN(SDHI0D2_PTD),
- GPIO_FN(SDHI0D1_PTD),
- GPIO_FN(SDHI0D0_PTD),
- GPIO_FN(SDHI0CMD_PTD),
- GPIO_FN(SDHI0CLK_PTD),
-
- /* SDHI0 (PTS) */
- GPIO_FN(SDHI0CD_PTS),
- GPIO_FN(SDHI0WP_PTS),
- GPIO_FN(SDHI0D3_PTS),
- GPIO_FN(SDHI0D2_PTS),
- GPIO_FN(SDHI0D1_PTS),
- GPIO_FN(SDHI0D0_PTS),
- GPIO_FN(SDHI0CMD_PTS),
- GPIO_FN(SDHI0CLK_PTS),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
-
- /* SIUA */
- GPIO_FN(SIUAFCK),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUAMCK),
- GPIO_FN(SIUAISPD),
- GPIO_FN(SIUAOSPD),
-
- /* SIUB */
- GPIO_FN(SIUBFCK),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUBMCK),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-
- /* MSIOF0 (PTF) */
- GPIO_FN(MSIOF0_PTF_TXD),
- GPIO_FN(MSIOF0_PTF_RXD),
- GPIO_FN(MSIOF0_PTF_MCK),
- GPIO_FN(MSIOF0_PTF_TSYNC),
- GPIO_FN(MSIOF0_PTF_TSCK),
- GPIO_FN(MSIOF0_PTF_RSYNC),
- GPIO_FN(MSIOF0_PTF_RSCK),
- GPIO_FN(MSIOF0_PTF_SS1),
- GPIO_FN(MSIOF0_PTF_SS2),
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN(MSIOF0_PTT_TXD),
- GPIO_FN(MSIOF0_PTT_RXD),
- GPIO_FN(MSIOF0_PTX_MCK),
- GPIO_FN(MSIOF0_PTT_TSYNC),
- GPIO_FN(MSIOF0_PTT_TSCK),
- GPIO_FN(MSIOF0_PTT_RSYNC),
- GPIO_FN(MSIOF0_PTT_RSCK),
- GPIO_FN(MSIOF0_PTT_SS1),
- GPIO_FN(MSIOF0_PTT_SS2),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_RSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
-
- /* TSIF */
- GPIO_FN(TS0_SDAT),
- GPIO_FN(TS0_SCK),
- GPIO_FN(TS0_SDEN),
- GPIO_FN(TS0_SPSYNC),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* TPU */
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO3),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IODREQ),
- GPIO_FN(IDEIORDY),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IDEIORD),
- GPIO_FN(IDECS1),
- GPIO_FN(IDECS0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, -2, 2, -2, 2, 2, 2, 2),
- GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ5_FN, PTJ5_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xa405011a, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTQ3_FN, 0, 0, PTQ3_IN,
- PTQ2_FN, 0, 0, PTQ2_IN,
- PTQ1_FN, 0, 0, PTQ1_IN,
- PTQ0_FN, 0, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, 0, PTS7_IN,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(2, 2, 2, -4, 2, 2, -2),
- GROUP(
- PSA15_PSA14_FN1, PSA15_PSA14_FN2, 0, 0,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2, 0, 0,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2, 0, 0,
- /* RESERVED [4] */
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3, 0,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELB", 0xa4050150, 16,
- GROUP(2, 2, -2, 2, 2, 2, 2, -2),
- GROUP(
- PSB15_PSB14_FN1, PSB15_PSB14_FN2, 0, 0,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS, 0, 0,
- /* RESERVED [2] */
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3, 0,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2, 0, 0,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2, 0, 0,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PSC15_PSC14_FN1, PSC15_PSC14_FN2, 0, 0,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2, 0, 0,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3, 0,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2, 0, 0,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3, 0,
- /* RESERVED [3] */ ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 2, GROUP(
- PSD15_PSD14_FN1, PSD15_PSD14_FN2, 0, 0,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2, 0, 0,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3, 0,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2, 0, 0,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2, 0, 0,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2, 0, 0,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2, 0, 0,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- 0, 0, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, 0, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, 0, 0, 0,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7723_pinmux_info = {
- .name = "sh7723_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7724.c b/drivers/pinctrl/renesas/pfc-sh7724.c
deleted file mode 100644
index 26517ad26a0fd1..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7724.c
+++ /dev/null
@@ -1,2177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7724.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ6_FN, PTJ5_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1,
-
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1,
-
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1,
-
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1,
-
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /*PTA*/
- D23_MARK, KEYOUT2_MARK, IDED15_MARK,
- D22_MARK, KEYOUT1_MARK, IDED14_MARK,
- D21_MARK, KEYOUT0_MARK, IDED13_MARK,
- D20_MARK, KEYIN4_MARK, IDED12_MARK,
- D19_MARK, KEYIN3_MARK, IDED11_MARK,
- D18_MARK, KEYIN2_MARK, IDED10_MARK,
- D17_MARK, KEYIN1_MARK, IDED9_MARK,
- D16_MARK, KEYIN0_MARK, IDED8_MARK,
-
- /*PTB*/
- D31_MARK, TPUTO1_MARK, IDEA1_MARK,
- D30_MARK, TPUTO0_MARK, IDEA0_MARK,
- D29_MARK, IODREQ_MARK,
- D28_MARK, IDECS0_MARK,
- D27_MARK, IDECS1_MARK,
- D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK,
- D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK,
- D24_MARK, KEYOUT3_MARK, IDEINT_MARK,
-
- /*PTC*/
- LCDD7_MARK,
- LCDD6_MARK,
- LCDD5_MARK,
- LCDD4_MARK,
- LCDD3_MARK,
- LCDD2_MARK,
- LCDD1_MARK,
- LCDD0_MARK,
-
- /*PTD*/
- LCDD15_MARK,
- LCDD14_MARK,
- LCDD13_MARK,
- LCDD12_MARK,
- LCDD11_MARK,
- LCDD10_MARK,
- LCDD9_MARK,
- LCDD8_MARK,
-
- /*PTE*/
- FSIMCKB_MARK,
- FSIMCKA_MARK,
- LCDD21_MARK, SCIF2_L_TXD_MARK,
- LCDD20_MARK, SCIF4_SCK_MARK,
- LCDD19_MARK, SCIF4_RXD_MARK,
- LCDD18_MARK, SCIF4_TXD_MARK,
- LCDD17_MARK,
- LCDD16_MARK,
-
- /*PTF*/
- LCDVSYN_MARK,
- LCDDISP_MARK, LCDRS_MARK,
- LCDHSYN_MARK, LCDCS_MARK,
- LCDDON_MARK,
- LCDDCK_MARK, LCDWR_MARK,
- LCDVEPWC_MARK, SCIF0_TXD_MARK,
- LCDD23_MARK, SCIF2_L_SCK_MARK,
- LCDD22_MARK, SCIF2_L_RXD_MARK,
-
- /*PTG*/
- AUDCK_MARK,
- AUDSYNC_MARK,
- AUDATA3_MARK,
- AUDATA2_MARK,
- AUDATA1_MARK,
- AUDATA0_MARK,
-
- /*PTH*/
- VIO0_VD_MARK,
- VIO0_CLK_MARK,
- VIO0_D7_MARK,
- VIO0_D6_MARK,
- VIO0_D5_MARK,
- VIO0_D4_MARK,
- VIO0_D3_MARK,
- VIO0_D2_MARK,
-
- /*PTJ*/
- PDSTATUS_MARK,
- STATUS2_MARK,
- STATUS0_MARK,
- A25_MARK, BS_MARK,
- A24_MARK,
- A23_MARK,
- A22_MARK,
-
- /*PTK*/
- VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK,
- VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK,
- VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK,
- VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK,
- VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK,
- VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK,
- VIO0_FLD_MARK,
- VIO0_HD_MARK,
-
- /*PTL*/
- DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK,
- DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK,
- DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK,
- DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK,
- DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK,
- DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK,
- DV_D15_MARK,
- DV_D14_MARK, MSIOF0_MCK_MARK,
-
- /*PTM*/
- DV_D13_MARK, MSIOF0_TSCK_MARK,
- DV_D12_MARK, MSIOF0_RXD_MARK,
- DV_D11_MARK, MSIOF0_TXD_MARK,
- DV_D10_MARK, MSIOF0_TSYNC_MARK,
- DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK,
- DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK,
- LCDVCPWC_MARK, SCIF0_RXD_MARK,
- LCDRD_MARK, SCIF0_SCK_MARK,
-
- /*PTN*/
- VIO0_D1_MARK,
- VIO0_D0_MARK,
- DV_CLKI_MARK,
- DV_CLK_MARK, SCIF2_V_SCK_MARK,
- DV_VSYNC_MARK, SCIF2_V_RXD_MARK,
- DV_HSYNC_MARK, SCIF2_V_TXD_MARK,
- DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK,
- DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK,
-
- /*PTQ*/
- D7_MARK,
- D6_MARK,
- D5_MARK,
- D4_MARK,
- D3_MARK,
- D2_MARK,
- D1_MARK,
- D0_MARK,
-
- /*PTR*/
- CS6B_CE1B_MARK,
- CS6A_CE2B_MARK,
- CS5B_CE1A_MARK,
- CS5A_CE2A_MARK,
- IOIS16_MARK, LCDLCLK_MARK,
- WAIT_MARK,
- WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK,
- WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK,
-
- /*PTS*/
- VIO_CKO_MARK,
- VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK,
- VIO1_HD_MARK, SCIF5_SCK_MARK,
- VIO1_VD_MARK, SCIF5_RXD_MARK,
- VIO1_CLK_MARK, SCIF5_TXD_MARK,
- VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK,
- VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK,
-
- /*PTT*/
- D15_MARK,
- D14_MARK,
- D13_MARK,
- D12_MARK,
- D11_MARK,
- D10_MARK,
- D9_MARK,
- D8_MARK,
-
- /*PTU*/
- DMAC_DACK0_MARK,
- DMAC_DREQ0_MARK,
- FSIOASD_MARK,
- FSIIABCK_MARK,
- FSIIALRCK_MARK,
- FSIOABCK_MARK,
- FSIOALRCK_MARK,
- CLKAUDIOAO_MARK,
-
- /*PTV*/
- FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK,
- FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK,
- FSIIBBCK_MARK, MSIOF1_RXD_MARK,
- FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK,
- FSIOBBCK_MARK, MSIOF1_TSCK_MARK,
- FSIOBLRCK_MARK, MSIOF1_TXD_MARK,
- CLKAUDIOBO_MARK, MSIOF1_MCK_MARK,
- FSIIASD_MARK,
-
- /*PTW*/
- MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK,
- MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK,
- MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK,
- MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK,
- MMC_D3_MARK, SDHI1D1_MARK,
- MMC_D2_MARK, SDHI1D0_MARK,
- MMC_D1_MARK, SDHI1CMD_MARK,
- MMC_D0_MARK, SDHI1CLK_MARK,
-
- /*PTX*/
- DMAC_DACK1_MARK, IRDA_OUT_MARK,
- DMAC_DREQ1_MARK, IRDA_IN_MARK,
- TSIF_TS0_SDAT_MARK, LNKSTA_MARK,
- TSIF_TS0_SCK_MARK, MDIO_MARK,
- TSIF_TS0_SDEN_MARK, MDC_MARK,
- TSIF_TS0_SPSYNC_MARK,
- MMC_CLK_MARK,
- MMC_CMD_MARK,
-
- /*PTY*/
- SDHI0CD_MARK,
- SDHI0WP_MARK,
- SDHI0D3_MARK,
- SDHI0D2_MARK,
- SDHI0D1_MARK,
- SDHI0D0_MARK,
- SDHI0CMD_MARK,
- SDHI0CLK_MARK,
-
- /*PTZ*/
- INTC_IRQ7_MARK, SCIF3_I_CTS_MARK,
- INTC_IRQ6_MARK, SCIF3_I_RTS_MARK,
- INTC_IRQ5_MARK, SCIF3_I_SCK_MARK,
- INTC_IRQ4_MARK, SCIF3_I_RXD_MARK,
- INTC_IRQ3_MARK, SCIF3_I_TXD_MARK,
- INTC_IRQ2_MARK,
- INTC_IRQ1_MARK,
- INTC_IRQ0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT),
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN),
-
- PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN),
-
- PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN),
- PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN),
- PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN),
- PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN),
- PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN),
- PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN),
- PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN),
- PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN),
- PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN),
- PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN),
- PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN),
- PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN),
- PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN),
- PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN),
- PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN),
- PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN),
- PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN),
- PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN),
-
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
- PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
- PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
- PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
- PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
- PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
- PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
- PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
- PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
- PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
- PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
- PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
- PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
- PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN),
- PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
- PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
-
- PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN),
- PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN),
- PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN),
- PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN),
- PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN),
- PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN),
-
- PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN),
-
- /* PTF FN */
- PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN),
- PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN),
- PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN),
- PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN),
- PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN),
- PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN),
-
- PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN),
- PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN),
- PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN),
-
- PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN),
- PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN),
- PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(VIO0_VD_MARK, PTH7_FN),
- PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
- PINMUX_DATA(VIO0_D7_MARK, PTH5_FN),
- PINMUX_DATA(VIO0_D6_MARK, PTH4_FN),
- PINMUX_DATA(VIO0_D5_MARK, PTH3_FN),
- PINMUX_DATA(VIO0_D4_MARK, PTH2_FN),
- PINMUX_DATA(VIO0_D3_MARK, PTH1_FN),
- PINMUX_DATA(VIO0_D2_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN),
- PINMUX_DATA(STATUS2_MARK, PTJ6_FN),
- PINMUX_DATA(STATUS0_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN),
- PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN),
- PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN),
- PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN),
- PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN),
- PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN),
- PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN),
- PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN),
- PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN),
- PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN),
- PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN),
- PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN),
-
- PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN),
- PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN),
- PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN),
- PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN),
- PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN),
- PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN),
- PINMUX_DATA(VIO0_HD_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN),
- PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN),
- PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN),
- PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN),
- PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN),
- PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN),
- PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN),
- PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN),
-
- PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN),
- PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN),
- PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN),
-
- PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN),
- PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN),
- PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN),
- PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN),
- PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN),
- PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN),
-
- PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN),
- PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN),
- PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN),
- PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN),
- PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN),
- PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN),
- PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN),
- PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN),
- PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN),
- PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN),
- PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN),
- PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN),
- PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN),
- PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN),
-
- PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VIO0_D1_MARK, PTN7_FN),
- PINMUX_DATA(VIO0_D0_MARK, PTN6_FN),
-
- PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN),
- PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN),
- PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN),
-
- PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN),
- PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN),
- PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN),
- PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN),
- PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN),
-
- PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN),
- PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(D7_MARK, PTQ7_FN),
- PINMUX_DATA(D6_MARK, PTQ6_FN),
- PINMUX_DATA(D5_MARK, PTQ5_FN),
- PINMUX_DATA(D4_MARK, PTQ4_FN),
- PINMUX_DATA(D3_MARK, PTQ3_FN),
- PINMUX_DATA(D2_MARK, PTQ2_FN),
- PINMUX_DATA(D1_MARK, PTQ1_FN),
- PINMUX_DATA(D0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN),
-
- PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN),
- PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN),
- PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(VIO_CKO_MARK, PTS6_FN),
-
- PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN),
-
- PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN),
-
- PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN),
- PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN),
- PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN),
- PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN),
- PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN),
- PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN),
-
- PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN),
-
- PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN),
- PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN),
-
- PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN),
- PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(D15_MARK, PTT7_FN),
- PINMUX_DATA(D14_MARK, PTT6_FN),
- PINMUX_DATA(D13_MARK, PTT5_FN),
- PINMUX_DATA(D12_MARK, PTT4_FN),
- PINMUX_DATA(D11_MARK, PTT3_FN),
- PINMUX_DATA(D10_MARK, PTT2_FN),
- PINMUX_DATA(D9_MARK, PTT1_FN),
- PINMUX_DATA(D8_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
- PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
-
- PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN),
- PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN),
- PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN),
- PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN),
- PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN),
- PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN),
- PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN),
- PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN),
- PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN),
- PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN),
- PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN),
- PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN),
- PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN),
-
- PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN),
- PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN),
-
- /* PTW FN */
- PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN),
- PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN),
- PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN),
- PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN),
- PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN),
- PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN),
- PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN),
- PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN),
-
- PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN),
-
- PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN),
- PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN),
- PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN),
-
- /* PTX FN */
- PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN),
- PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN),
-
- PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN),
-
- PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN),
- PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN),
- PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN),
- PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN),
-
- PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN),
- PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN),
- PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN),
-
- PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(SDHI0CD_MARK, PTY7_FN),
- PINMUX_DATA(SDHI0WP_MARK, PTY6_FN),
- PINMUX_DATA(SDHI0D3_MARK, PTY5_FN),
- PINMUX_DATA(SDHI0D2_MARK, PTY4_FN),
- PINMUX_DATA(SDHI0D1_MARK, PTY3_FN),
- PINMUX_DATA(SDHI0D0_MARK, PTY2_FN),
- PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
- PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN),
- PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN),
- PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN),
- PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN),
- PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN),
- PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN),
- PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN),
- PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN),
-
- PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN),
- PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN),
- PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN),
- PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN),
- PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ7),
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
-
- /* KEYSC */
- GPIO_FN(KEYOUT5_IN5),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT0),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IODREQ),
- GPIO_FN(IDECS0),
- GPIO_FN(IDECS1),
- GPIO_FN(IDEIORD),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIORDY),
-
- /* TPU */
- GPIO_FN(TPUTO3),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTI3),
- GPIO_FN(TPUTI2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDVSYN),
- GPIO_FN(LCDDISP),
- GPIO_FN(LCDRS),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDDON),
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDRD),
- GPIO_FN(LCDLCLK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_L_TXD),
- GPIO_FN(SCIF2_L_SCK),
- GPIO_FN(SCIF2_L_RXD),
- GPIO_FN(SCIF2_V_TXD),
- GPIO_FN(SCIF2_V_SCK),
- GPIO_FN(SCIF2_V_RXD),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_V_SCK),
- GPIO_FN(SCIF3_V_RXD),
- GPIO_FN(SCIF3_V_TXD),
- GPIO_FN(SCIF3_V_CTS),
- GPIO_FN(SCIF3_V_RTS),
- GPIO_FN(SCIF3_I_SCK),
- GPIO_FN(SCIF3_I_RXD),
- GPIO_FN(SCIF3_I_TXD),
- GPIO_FN(SCIF3_I_CTS),
- GPIO_FN(SCIF3_I_RTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(SCIF4_TXD),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(SCIF5_TXD),
-
- /* FSI */
- GPIO_FN(FSIMCKB),
- GPIO_FN(FSIMCKA),
- GPIO_FN(FSIOASD),
- GPIO_FN(FSIIABCK),
- GPIO_FN(FSIIALRCK),
- GPIO_FN(FSIOABCK),
- GPIO_FN(FSIOALRCK),
- GPIO_FN(CLKAUDIOAO),
- GPIO_FN(FSIIBSD),
- GPIO_FN(FSIOBSD),
- GPIO_FN(FSIIBBCK),
- GPIO_FN(FSIIBLRCK),
- GPIO_FN(FSIOBBCK),
- GPIO_FN(FSIOBLRCK),
- GPIO_FN(CLKAUDIOBO),
- GPIO_FN(FSIIASD),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* VIO */
- GPIO_FN(VIO_CKO),
-
- /* VIO0 */
- GPIO_FN(VIO0_D15),
- GPIO_FN(VIO0_D14),
- GPIO_FN(VIO0_D13),
- GPIO_FN(VIO0_D12),
- GPIO_FN(VIO0_D11),
- GPIO_FN(VIO0_D10),
- GPIO_FN(VIO0_D9),
- GPIO_FN(VIO0_D8),
- GPIO_FN(VIO0_D7),
- GPIO_FN(VIO0_D6),
- GPIO_FN(VIO0_D5),
- GPIO_FN(VIO0_D4),
- GPIO_FN(VIO0_D3),
- GPIO_FN(VIO0_D2),
- GPIO_FN(VIO0_D1),
- GPIO_FN(VIO0_D0),
- GPIO_FN(VIO0_VD),
- GPIO_FN(VIO0_CLK),
- GPIO_FN(VIO0_FLD),
- GPIO_FN(VIO0_HD),
-
- /* VIO1 */
- GPIO_FN(VIO1_D7),
- GPIO_FN(VIO1_D6),
- GPIO_FN(VIO1_D5),
- GPIO_FN(VIO1_D4),
- GPIO_FN(VIO1_D3),
- GPIO_FN(VIO1_D2),
- GPIO_FN(VIO1_D1),
- GPIO_FN(VIO1_D0),
- GPIO_FN(VIO1_FLD),
- GPIO_FN(VIO1_HD),
- GPIO_FN(VIO1_VD),
- GPIO_FN(VIO1_CLK),
-
- /* Eth */
- GPIO_FN(RMII_RXD0),
- GPIO_FN(RMII_RXD1),
- GPIO_FN(RMII_TXD0),
- GPIO_FN(RMII_TXD1),
- GPIO_FN(RMII_REF_CLK),
- GPIO_FN(RMII_TX_EN),
- GPIO_FN(RMII_RX_ER),
- GPIO_FN(RMII_CRS_DV),
- GPIO_FN(LNKSTA),
- GPIO_FN(MDIO),
- GPIO_FN(MDC),
-
- /* System */
- GPIO_FN(PDSTATUS),
- GPIO_FN(STATUS2),
- GPIO_FN(STATUS0),
-
- /* VOU */
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- /* MSIOF0 */
- GPIO_FN(MSIOF0_RXD),
- GPIO_FN(MSIOF0_TXD),
- GPIO_FN(MSIOF0_MCK),
- GPIO_FN(MSIOF0_TSCK),
- GPIO_FN(MSIOF0_SS1),
- GPIO_FN(MSIOF0_SS2),
- GPIO_FN(MSIOF0_TSYNC),
- GPIO_FN(MSIOF0_RSCK),
- GPIO_FN(MSIOF0_RSYNC),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_RSYNC),
-
- /* DMAC */
- GPIO_FN(DMAC_DACK0),
- GPIO_FN(DMAC_DREQ0),
- GPIO_FN(DMAC_DACK1),
- GPIO_FN(DMAC_DREQ1),
-
- /* SDHI0 */
- GPIO_FN(SDHI0CD),
- GPIO_FN(SDHI0WP),
- GPIO_FN(SDHI0CMD),
- GPIO_FN(SDHI0CLK),
- GPIO_FN(SDHI0D3),
- GPIO_FN(SDHI0D2),
- GPIO_FN(SDHI0D1),
- GPIO_FN(SDHI0D0),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
-
- /* MMC */
- GPIO_FN(MMC_D7),
- GPIO_FN(MMC_D6),
- GPIO_FN(MMC_D5),
- GPIO_FN(MMC_D4),
- GPIO_FN(MMC_D3),
- GPIO_FN(MMC_D2),
- GPIO_FN(MMC_D1),
- GPIO_FN(MMC_D0),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_CMD),
-
- /* IrDA */
- GPIO_FN(IRDA_OUT),
- GPIO_FN(IRDA_IN),
-
- /* TSIF */
- GPIO_FN(TSIF_TS0_SDAT),
- GPIO_FN(TSIF_TS0_SCK),
- GPIO_FN(TSIF_TS0_SDEN),
- GPIO_FN(TSIF_TS0_SPSYNC),
-
- /* IRQ */
- GPIO_FN(INTC_IRQ7),
- GPIO_FN(INTC_IRQ6),
- GPIO_FN(INTC_IRQ5),
- GPIO_FN(INTC_IRQ4),
- GPIO_FN(INTC_IRQ3),
- GPIO_FN(INTC_IRQ2),
- GPIO_FN(INTC_IRQ1),
- GPIO_FN(INTC_IRQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, 0, PTE7_IN,
- PTE6_FN, PTE6_OUT, 0, PTE6_IN,
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, 0,
- PTJ5_FN, PTJ5_OUT, 0, 0,
- 0, 0, 0, 0,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- PTQ7_FN, PTQ7_OUT, 0, PTQ7_IN,
- PTQ6_FN, PTQ6_OUT, 0, PTQ6_IN,
- PTQ5_FN, PTQ5_OUT, 0, PTQ5_IN,
- PTQ4_FN, PTQ4_OUT, 0, PTQ4_IN,
- PTQ3_FN, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2_FN, PTQ2_OUT, 0, PTQ2_IN,
- PTQ1_FN, PTQ1_OUT, 0, PTQ1_IN,
- PTQ0_FN, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, 0, PTT7_IN,
- PTT6_FN, PTT6_OUT, 0, PTT6_IN,
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, 0, PTU7_IN,
- PTU6_FN, PTU6_OUT, 0, PTU6_IN,
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1, GROUP(
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- 0, 0,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- 0, 0,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- 0, 0,
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1))
- },
- { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1, GROUP(
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- 0, 0,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1))
- },
- { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1, GROUP(
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7724_pinmux_info = {
- .name = "sh7724_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7734.c b/drivers/pinctrl/renesas/pfc-sh7734.c
deleted file mode 100644
index 106a500ad13d16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7734.c
+++ /dev/null
@@ -1,2408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/kernel.h>
-#include <cpu/sh7734.h>
-
-#include "sh_pfc.h"
-
-#define CPU_ALL_GP(fn, sfx) \
- PORT_GP_32(0, fn, sfx), \
- PORT_GP_32(1, fn, sfx), \
- PORT_GP_32(2, fn, sfx), \
- PORT_GP_32(3, fn, sfx), \
- PORT_GP_32(4, fn, sfx), \
- PORT_GP_12(5, fn, sfx)
-
-#undef _GP_DATA
-#define _GP_DATA(bank, pin, name, sfx, cfg) \
- PINMUX_DATA(name##_DATA, name##_FN, name##_IN, name##_OUT)
-
-#define _GP_INOUTSEL(bank, pin, name, sfx, cfg) name##_IN, name##_OUT
-#define _GP_INDT(bank, pin, name, sfx, cfg) name##_DATA
-#define GP_INOUTSEL(bank) PORT_GP_32_REV(bank, _GP_INOUTSEL, unused)
-#define GP_INDT(bank) PORT_GP_32_REV(bank, _GP_INDT, unused)
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- GP_ALL(DATA), /* GP_0_0_DATA -> GP_5_11_DATA */
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- GP_ALL(IN), /* GP_0_0_IN -> GP_5_11_IN */
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- GP_ALL(OUT), /* GP_0_0_OUT -> GP_5_11_OUT */
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- GP_ALL(FN), /* GP_0_0_FN -> GP_5_11_FN */
-
- /* GPSR0 */
- FN_IP1_9_8, FN_IP1_11_10, FN_IP1_13_12, FN_IP1_15_14,
- FN_IP0_7_6, FN_IP0_9_8, FN_IP0_11_10, FN_IP0_13_12,
- FN_IP0_15_14, FN_IP0_17_16, FN_IP0_19_18, FN_IP0_21_20,
- FN_IP0_23_22, FN_IP0_25_24, FN_IP0_27_26, FN_IP0_29_28,
- FN_IP0_31_30, FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4,
- FN_IP1_7_6, FN_IP11_28, FN_IP0_1_0, FN_IP0_3_2,
- FN_IP0_5_4, FN_IP1_17_16, FN_IP1_19_18, FN_IP1_22_20,
- FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0,
-
- /* GPSR1 */
- FN_IP3_20, FN_IP3_29_27, FN_IP11_20_19, FN_IP11_22_21,
- FN_IP2_16_14, FN_IP2_19_17, FN_IP2_22_20, FN_IP2_24_23,
- FN_IP2_27_25, FN_IP2_30_28, FN_IP3_1_0, FN_CLKOUT,
- FN_BS, FN_CS0, FN_IP3_2, FN_EX_CS0,
- FN_IP3_5_3, FN_IP3_8_6, FN_IP3_11_9, FN_IP3_14_12,
- FN_IP3_17_15, FN_RD, FN_IP3_19_18, FN_WE0,
- FN_WE1, FN_IP2_4_3, FN_IP3_23_21, FN_IP3_26_24,
- FN_IP2_7_5, FN_IP2_10_8, FN_IP2_13_11, FN_IP11_25_23,
-
- /* GPSR2 */
- FN_IP11_6_4, FN_IP11_9_7, FN_IP11_11_10, FN_IP4_2_0,
- FN_IP8_29_28, FN_IP11_27_26, FN_IP8_22_20, FN_IP8_25_23,
- FN_IP11_12, FN_IP8_27_26, FN_IP4_5_3, FN_IP4_8_6,
- FN_IP4_11_9, FN_IP4_14_12, FN_IP4_17_15, FN_IP4_19_18,
- FN_IP4_21_20, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
- FN_IP4_29_28, FN_IP4_31_30, FN_IP5_2_0, FN_IP5_5_3,
- FN_IP5_8_6, FN_IP5_11_9, FN_IP5_14_12, FN_IP5_17_15,
- FN_IP5_20_18, FN_IP5_22_21, FN_IP5_24_23, FN_IP5_26_25,
-
- /* GPSR3 */
- FN_IP6_2_0, FN_IP6_5_3, FN_IP6_7_6, FN_IP6_9_8,
- FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14, FN_IP6_17_16,
- FN_IP6_20_18, FN_IP6_23_21, FN_IP7_2_0, FN_IP7_5_3,
- FN_IP7_8_6, FN_IP7_11_9, FN_IP7_14_12, FN_IP7_17_15,
- FN_IP7_20_18, FN_IP7_23_21, FN_IP7_26_24, FN_IP7_28_27,
- FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4,
- FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12,
- FN_IP8_15_14, FN_IP8_17_16, FN_IP8_19_18, FN_IP9_1_0,
-
- /* GPSR4 */
- FN_IP9_19_18, FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24,
- FN_IP9_11_10, FN_IP9_13_12, FN_IP9_15_14, FN_IP9_17_16,
- FN_IP9_3_2, FN_IP9_5_4, FN_IP9_7_6, FN_IP9_9_8,
- FN_IP9_27_26, FN_IP9_29_28, FN_IP10_2_0, FN_IP10_5_3,
- FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_15,
- FN_IP10_18_16, FN_IP10_21_19, FN_IP11_0, FN_IP11_1,
- FN_SCL0, FN_IP11_2, FN_PENC0, FN_IP11_15_13, /* Need check*/
- FN_USB_OVC0, FN_IP11_18_16,
- FN_IP10_22, FN_IP10_24_23,
-
- /* GPSR5 */
- FN_IP10_25, FN_IP11_3, FN_IRQ2_B, FN_IRQ3_B,
- FN_IP10_27_26, /* 10 */
- FN_IP10_29_28, /* 11 */
-
- /* IPSR0 */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A, FN_TIOC3D_C,
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C,
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C,
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C,
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C,
-
- /* IPSR1 */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6, FN_FD3_A,
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5, FN_FD2_A,
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4, FN_FD1_A,
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3, FN_FD0_A,
- FN_A25, FN_TX2_D, FN_ST1_D2,
- FN_A24, FN_RX2_D, FN_ST1_D1,
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A,
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A,
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A,
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A,
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C,
-
- /* IPSR2 */
- FN_D14, FN_TX2_B, FN_FSE_A, FN_ET0_TX_CLK_B,
- FN_D13, FN_RX2_B, FN_FRB_A, FN_ET0_ETXD6_B,
- FN_D12, FN_FWE_A, FN_ET0_ETXD5_B,
- FN_D11, FN_RSPI_MISO_A, FN_QMI_QIO1_A, FN_FRE_A,
- FN_ET0_ETXD3_B,
- FN_D10, FN_RSPI_MOSI_A, FN_QMO_QIO0_A, FN_FALE_A,
- FN_ET0_ETXD2_B,
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A, FN_FCLE_A,
- FN_ET0_ETXD1_B,
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A, FN_FCE_A,
- FN_ET0_GTX_CLK_B,
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A, FN_FD7_A,
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A, FN_FD6_A,
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7, FN_FD4_A,
-
- /* IPSR3 */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A, FN_ET0_ETXD7,
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A,
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A,
- FN_EX_WAIT0, FN_TCLK1_B,
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B, FN_ET0_ETXD3_A,
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B, FN_ET0_ETXD2_A,
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B, FN_ET0_ETXD1_A,
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B, FN_ET0_GTX_CLK_A,
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B, FN_ET0_ETXD0,
- FN_CS1_A26, FN_QIO3_B,
- FN_D15, FN_SCK2_B,
-
- /* IPSR4 */
- FN_SCK2_A, FN_VI0_G3,
- FN_RTS1_B, FN_VI0_G2,
- FN_CTS1_B, FN_VI0_DATA7_VI0_G1,
- FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A, FN_ET0_MDC,
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A, FN_ET0_COL,
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A, FN_ET0_CRS,
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A, FN_ET0_RX_ER,
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A, FN_ET0_RX_DV,
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A, FN_ET0_ERXD7,
-
- /* IPSR5 */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, FN_ET0_RX_CLK_B,
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, FN_ET0_ERXD2_B,
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, FN_ET0_ERXD3_B,
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, FN_ET0_MDIO_B,
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, FN_ET0_LINK_B,
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, FN_ET0_MAGIC_B,
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, FN_ET0_PHY_INT_B,
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5,
- FN_REF125CK, FN_ADTRG, FN_RX5_C,
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D,
-
- /* IPSR6 */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A, FN_TCLKA_A, FN_HIFD00,
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A, FN_TCLKB_A, FN_HIFD01,
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A, FN_TIOC1A_A, FN_HIFD08,
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A, FN_HIFD09,
-
- /* IPSR7 */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A, FN_HIFD10,
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A, FN_HIFD11,
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A, FN_HIFD12,
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A, FN_HIFD13,
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A, FN_HIFD14,
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A, FN_HIFD15,
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A, FN_HIFCS,
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A, FN_HIFRS,
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A, FN_HIFWR,
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- FN_DU0_DB4, FN_HIFINT,
-
- /* IPSR8 */
- FN_DU0_DB5, FN_HIFDREQ,
- FN_DU0_DB6, FN_HIFRDY,
- FN_DU0_DB7, FN_SSI_SCK0_B, FN_HIFEBL_B,
- FN_DU0_DOTCLKIN, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- FN_DU0_DOTCLKOUT, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- FN_DU0_EXHSYNC_DU0_HSYNC, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- FN_DU0_EXVSYNC_DU0_VSYNC, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B, FN_SSI_SDATA1_B,
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- FN_IRQ0_A, FN_HSPI_TX_B, FN_RX3_E, FN_ET0_ERXD0,
- FN_IRQ1_A, FN_HSPI_RX_B, FN_TX3_E, FN_ET0_ERXD1,
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- FN_VI1_CLK_A, FN_FD0_B, FN_LCD_DATA0_B,
- FN_VI1_0_A, FN_FD1_B, FN_LCD_DATA1_B,
- FN_VI1_1_A, FN_FD2_B, FN_LCD_DATA2_B,
- FN_VI1_2_A, FN_FD3_B, FN_LCD_DATA3_B,
- FN_VI1_3_A, FN_FD4_B, FN_LCD_DATA4_B,
- FN_VI1_4_A, FN_FD5_B, FN_LCD_DATA5_B,
- FN_VI1_5_A, FN_FD6_B, FN_LCD_DATA6_B,
- FN_VI1_6_A, FN_FD7_B, FN_LCD_DATA7_B,
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B,
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B,
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B,
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B,
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B,
-
- /* IPSR10 */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B, FN_LCD_DATA15_B,
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B, FN_LCD_DON_B,
- FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B, FN_LCD_CL1_B,
- FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B, FN_LCD_CL2_B,
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B, FN_LCD_FLM_B,
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B, FN_LCD_VEPWC_B,
- FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B, FN_LCD_M_DISP_B,
- FN_CAN_CLK_A, FN_RX4_D,
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK,
- FN_CAN1_RX_A, FN_IRQ1_B,
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG,
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT,
-
- /* IPSR11 */
- FN_SCL1, FN_SCIF_CLK_C,
- FN_SDA1, FN_RX1_E,
- FN_SDA0, FN_HIFEBL_A,
- FN_SDSELF, FN_RTS1_E,
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A, FN_ET0_ERXD4,
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A, FN_ET0_ERXD5,
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- FN_TX0_A, FN_HSPI_TX_A,
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D, FN_IETX_B,
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D, FN_IERX_B,
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN,
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER,
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C, FN_ET0_TX_CLK_A,
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- FN_PRESETOUT, FN_ST_CLKOUT,
-
- /* MOD_SEL1 */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2,
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2,
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2,
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- FN_SEL_INTC_0, FN_SEL_INTC_1,
-
- /* MOD_SEL2 */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2,
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2,
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
- FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1,
- FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2,
- FN_SEL_SCIF3_3, FN_SEL_SCIF3_4,
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
- FN_SEL_SCIF2_3,
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2,
- FN_SEL_SCIF1_3, FN_SEL_SCIF1_4,
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- CLKOUT_MARK, BS_MARK, CS0_MARK, EX_CS0_MARK, RD_MARK,
- WE0_MARK, WE1_MARK,
-
- SCL0_MARK, PENC0_MARK, USB_OVC0_MARK,
-
- IRQ2_B_MARK, IRQ3_B_MARK,
-
- /* IPSR0 */
- A15_MARK, ST0_VCO_CLKIN_MARK, LCD_DATA15_A_MARK, TIOC3D_C_MARK,
- A14_MARK, LCD_DATA14_A_MARK, TIOC3C_C_MARK,
- A13_MARK, LCD_DATA13_A_MARK, TIOC3B_C_MARK,
- A12_MARK, LCD_DATA12_A_MARK, TIOC3A_C_MARK,
- A11_MARK, ST0_D7_MARK, LCD_DATA11_A_MARK, TIOC2B_C_MARK,
- A10_MARK, ST0_D6_MARK, LCD_DATA10_A_MARK, TIOC2A_C_MARK,
- A9_MARK, ST0_D5_MARK, LCD_DATA9_A_MARK, TIOC1B_C_MARK,
- A8_MARK, ST0_D4_MARK, LCD_DATA8_A_MARK, TIOC1A_C_MARK,
- A7_MARK, ST0_D3_MARK, LCD_DATA7_A_MARK, TIOC0D_C_MARK,
- A6_MARK, ST0_D2_MARK, LCD_DATA6_A_MARK, TIOC0C_C_MARK,
- A5_MARK, ST0_D1_MARK, LCD_DATA5_A_MARK, TIOC0B_C_MARK,
- A4_MARK, ST0_D0_MARK, LCD_DATA4_A_MARK, TIOC0A_C_MARK,
- A3_MARK, ST0_VLD_MARK, LCD_DATA3_A_MARK, TCLKD_C_MARK,
- A2_MARK, ST0_SYC_MARK, LCD_DATA2_A_MARK, TCLKC_C_MARK,
- A1_MARK, ST0_REQ_MARK, LCD_DATA1_A_MARK, TCLKB_C_MARK,
- A0_MARK, ST0_CLKIN_MARK, LCD_DATA0_A_MARK, TCLKA_C_MARK,
-
- /* IPSR1 */
- D3_MARK, SD0_DAT3_A_MARK, MMC_D3_A_MARK, ST1_D6_MARK, FD3_A_MARK,
- D2_MARK, SD0_DAT2_A_MARK, MMC_D2_A_MARK, ST1_D5_MARK, FD2_A_MARK,
- D1_MARK, SD0_DAT1_A_MARK, MMC_D1_A_MARK, ST1_D4_MARK, FD1_A_MARK,
- D0_MARK, SD0_DAT0_A_MARK, MMC_D0_A_MARK, ST1_D3_MARK, FD0_A_MARK,
- A25_MARK, TX2_D_MARK, ST1_D2_MARK,
- A24_MARK, RX2_D_MARK, ST1_D1_MARK,
- A23_MARK, ST1_D0_MARK, LCD_M_DISP_A_MARK,
- A22_MARK, ST1_VLD_MARK, LCD_VEPWC_A_MARK,
- A21_MARK, ST1_SYC_MARK, LCD_VCPWC_A_MARK,
- A20_MARK, ST1_REQ_MARK, LCD_FLM_A_MARK,
- A19_MARK, ST1_CLKIN_MARK, LCD_CLK_A_MARK, TIOC4D_C_MARK,
- A18_MARK, ST1_PWM_MARK, LCD_CL2_A_MARK, TIOC4C_C_MARK,
- A17_MARK, ST1_VCO_CLKIN_MARK, LCD_CL1_A_MARK, TIOC4B_C_MARK,
- A16_MARK, ST0_PWM_MARK, LCD_DON_A_MARK, TIOC4A_C_MARK,
-
- /* IPSR2 */
- D14_MARK, TX2_B_MARK, FSE_A_MARK, ET0_TX_CLK_B_MARK,
- D13_MARK, RX2_B_MARK, FRB_A_MARK, ET0_ETXD6_B_MARK,
- D12_MARK, FWE_A_MARK, ET0_ETXD5_B_MARK,
- D11_MARK, RSPI_MISO_A_MARK, QMI_QIO1_A_MARK, FRE_A_MARK,
- ET0_ETXD3_B_MARK,
- D10_MARK, RSPI_MOSI_A_MARK, QMO_QIO0_A_MARK, FALE_A_MARK,
- ET0_ETXD2_B_MARK,
- D9_MARK, SD0_CMD_A_MARK, MMC_CMD_A_MARK, QIO3_A_MARK,
- FCLE_A_MARK, ET0_ETXD1_B_MARK,
- D8_MARK, SD0_CLK_A_MARK, MMC_CLK_A_MARK, QIO2_A_MARK,
- FCE_A_MARK, ET0_GTX_CLK_B_MARK,
- D7_MARK, RSPI_SSL_A_MARK, MMC_D7_A_MARK, QSSL_A_MARK,
- FD7_A_MARK,
- D6_MARK, RSPI_RSPCK_A_MARK, MMC_D6_A_MARK, QSPCLK_A_MARK,
- FD6_A_MARK,
- D5_MARK, SD0_WP_A_MARK, MMC_D5_A_MARK, FD5_A_MARK,
- D4_MARK, SD0_CD_A_MARK, MMC_D4_A_MARK, ST1_D7_MARK,
- FD4_A_MARK,
-
- /* IPSR3 */
- DRACK0_MARK, SD1_DAT2_A_MARK, ATAG_MARK, TCLK1_A_MARK, ET0_ETXD7_MARK,
- EX_WAIT2_MARK, SD1_DAT1_A_MARK, DACK2_MARK, CAN1_RX_C_MARK,
- ET0_MAGIC_C_MARK, ET0_ETXD6_A_MARK,
- EX_WAIT1_MARK, SD1_DAT0_A_MARK, DREQ2_MARK, CAN1_TX_C_MARK,
- ET0_LINK_C_MARK, ET0_ETXD5_A_MARK,
- EX_WAIT0_MARK, TCLK1_B_MARK,
- RD_WR_MARK, TCLK0_MARK, CAN_CLK_B_MARK, ET0_ETXD4_MARK,
- EX_CS5_MARK, SD1_CMD_A_MARK, ATADIR_MARK, QSSL_B_MARK,
- ET0_ETXD3_A_MARK,
- EX_CS4_MARK, SD1_WP_A_MARK, ATAWR_MARK, QMI_QIO1_B_MARK,
- ET0_ETXD2_A_MARK,
- EX_CS3_MARK, SD1_CD_A_MARK, ATARD_MARK, QMO_QIO0_B_MARK,
- ET0_ETXD1_A_MARK,
- EX_CS2_MARK, TX3_B_MARK, ATACS1_MARK, QSPCLK_B_MARK,
- ET0_GTX_CLK_A_MARK,
- EX_CS1_MARK, RX3_B_MARK, ATACS0_MARK, QIO2_B_MARK,
- ET0_ETXD0_MARK,
- CS1_A26_MARK, QIO3_B_MARK,
- D15_MARK, SCK2_B_MARK,
-
- /* IPSR4 */
- SCK2_A_MARK, VI0_G3_MARK,
- RTS1_B_MARK, VI0_G2_MARK,
- CTS1_B_MARK, VI0_DATA7_VI0_G1_MARK,
- TX1_B_MARK, VI0_DATA6_VI0_G0_MARK, ET0_PHY_INT_A_MARK,
- RX1_B_MARK, VI0_DATA5_VI0_B5_MARK, ET0_MAGIC_A_MARK,
- SCK1_B_MARK, VI0_DATA4_VI0_B4_MARK, ET0_LINK_A_MARK,
- RTS0_B_MARK, VI0_DATA3_VI0_B3_MARK, ET0_MDIO_A_MARK,
- CTS0_B_MARK, VI0_DATA2_VI0_B2_MARK, RMII0_MDIO_A_MARK,
- ET0_MDC_MARK,
- HTX0_A_MARK, TX1_A_MARK, VI0_DATA1_VI0_B1_MARK,
- RMII0_MDC_A_MARK, ET0_COL_MARK,
- HRX0_A_MARK, RX1_A_MARK, VI0_DATA0_VI0_B0_MARK,
- RMII0_CRS_DV_A_MARK, ET0_CRS_MARK,
- HSCK0_A_MARK, SCK1_A_MARK, VI0_VSYNC_MARK,
- RMII0_RX_ER_A_MARK, ET0_RX_ER_MARK,
- HRTS0_A_MARK, RTS1_A_MARK, VI0_HSYNC_MARK,
- RMII0_TXD_EN_A_MARK, ET0_RX_DV_MARK,
- HCTS0_A_MARK, CTS1_A_MARK, VI0_FIELD_MARK,
- RMII0_RXD1_A_MARK, ET0_ERXD7_MARK,
-
- /* IPSR5 */
- SD2_CLK_A_MARK, RX2_A_MARK, VI0_G4_MARK, ET0_RX_CLK_B_MARK,
- SD2_CMD_A_MARK, TX2_A_MARK, VI0_G5_MARK, ET0_ERXD2_B_MARK,
- SD2_DAT0_A_MARK, RX3_A_MARK, VI0_R0_MARK, ET0_ERXD3_B_MARK,
- SD2_DAT1_A_MARK, TX3_A_MARK, VI0_R1_MARK, ET0_MDIO_B_MARK,
- SD2_DAT2_A_MARK, RX4_A_MARK, VI0_R2_MARK, ET0_LINK_B_MARK,
- SD2_DAT3_A_MARK, TX4_A_MARK, VI0_R3_MARK, ET0_MAGIC_B_MARK,
- SD2_CD_A_MARK, RX5_A_MARK, VI0_R4_MARK, ET0_PHY_INT_B_MARK,
- SD2_WP_A_MARK, TX5_A_MARK, VI0_R5_MARK,
- REF125CK_MARK, ADTRG_MARK, RX5_C_MARK,
- REF50CK_MARK, CTS1_E_MARK, HCTS0_D_MARK,
-
- /* IPSR6 */
- DU0_DR0_MARK, SCIF_CLK_B_MARK, HRX0_D_MARK, IETX_A_MARK,
- TCLKA_A_MARK, HIFD00_MARK,
- DU0_DR1_MARK, SCK0_B_MARK, HTX0_D_MARK, IERX_A_MARK,
- TCLKB_A_MARK, HIFD01_MARK,
- DU0_DR2_MARK, RX0_B_MARK, TCLKC_A_MARK, HIFD02_MARK,
- DU0_DR3_MARK, TX0_B_MARK, TCLKD_A_MARK, HIFD03_MARK,
- DU0_DR4_MARK, CTS0_C_MARK, TIOC0A_A_MARK, HIFD04_MARK,
- DU0_DR5_MARK, RTS0_C_MARK, TIOC0B_A_MARK, HIFD05_MARK,
- DU0_DR6_MARK, SCK1_C_MARK, TIOC0C_A_MARK, HIFD06_MARK,
- DU0_DR7_MARK, RX1_C_MARK, TIOC0D_A_MARK, HIFD07_MARK,
- DU0_DG0_MARK, TX1_C_MARK, HSCK0_D_MARK, IECLK_A_MARK,
- TIOC1A_A_MARK, HIFD08_MARK,
- DU0_DG1_MARK, CTS1_C_MARK, HRTS0_D_MARK, TIOC1B_A_MARK,
- HIFD09_MARK,
-
- /* IPSR7 */
- DU0_DG2_MARK, RTS1_C_MARK, RMII0_MDC_B_MARK, TIOC2A_A_MARK,
- HIFD10_MARK,
- DU0_DG3_MARK, SCK2_C_MARK, RMII0_MDIO_B_MARK, TIOC2B_A_MARK,
- HIFD11_MARK,
- DU0_DG4_MARK, RX2_C_MARK, RMII0_CRS_DV_B_MARK, TIOC3A_A_MARK,
- HIFD12_MARK,
- DU0_DG5_MARK, TX2_C_MARK, RMII0_RX_ER_B_MARK, TIOC3B_A_MARK,
- HIFD13_MARK,
- DU0_DG6_MARK, RX3_C_MARK, RMII0_RXD0_B_MARK, TIOC3C_A_MARK,
- HIFD14_MARK,
- DU0_DG7_MARK, TX3_C_MARK, RMII0_RXD1_B_MARK, TIOC3D_A_MARK,
- HIFD15_MARK,
- DU0_DB0_MARK, RX4_C_MARK, RMII0_TXD_EN_B_MARK, TIOC4A_A_MARK,
- HIFCS_MARK,
- DU0_DB1_MARK, TX4_C_MARK, RMII0_TXD0_B_MARK, TIOC4B_A_MARK,
- HIFRS_MARK,
- DU0_DB2_MARK, RX5_B_MARK, RMII0_TXD1_B_MARK, TIOC4C_A_MARK,
- HIFWR_MARK,
- DU0_DB3_MARK, TX5_B_MARK, TIOC4D_A_MARK, HIFRD_MARK,
- DU0_DB4_MARK, HIFINT_MARK,
-
- /* IPSR8 */
- DU0_DB5_MARK, HIFDREQ_MARK,
- DU0_DB6_MARK, HIFRDY_MARK,
- DU0_DB7_MARK, SSI_SCK0_B_MARK, HIFEBL_B_MARK,
- DU0_DOTCLKIN_MARK, HSPI_CS0_C_MARK, SSI_WS0_B_MARK,
- DU0_DOTCLKOUT_MARK, HSPI_CLK0_C_MARK, SSI_SDATA0_B_MARK,
- DU0_EXHSYNC_DU0_HSYNC_MARK, HSPI_TX0_C_MARK, SSI_SCK1_B_MARK,
- DU0_EXVSYNC_DU0_VSYNC_MARK, HSPI_RX0_C_MARK, SSI_WS1_B_MARK,
- DU0_EXODDF_DU0_ODDF_MARK, CAN0_RX_B_MARK, HSCK0_B_MARK,
- SSI_SDATA1_B_MARK,
- DU0_DISP_MARK, CAN0_TX_B_MARK, HRX0_B_MARK, AUDIO_CLKA_B_MARK,
- DU0_CDE_MARK, HTX0_B_MARK, AUDIO_CLKB_B_MARK, LCD_VCPWC_B_MARK,
- IRQ0_A_MARK, HSPI_TX_B_MARK, RX3_E_MARK, ET0_ERXD0_MARK,
- IRQ1_A_MARK, HSPI_RX_B_MARK, TX3_E_MARK, ET0_ERXD1_MARK,
- IRQ2_A_MARK, CTS0_A_MARK, HCTS0_B_MARK, ET0_ERXD2_A_MARK,
- IRQ3_A_MARK, RTS0_A_MARK, HRTS0_B_MARK, ET0_ERXD3_A_MARK,
-
- /* IPSR9 */
- VI1_CLK_A_MARK, FD0_B_MARK, LCD_DATA0_B_MARK,
- VI1_0_A_MARK, FD1_B_MARK, LCD_DATA1_B_MARK,
- VI1_1_A_MARK, FD2_B_MARK, LCD_DATA2_B_MARK,
- VI1_2_A_MARK, FD3_B_MARK, LCD_DATA3_B_MARK,
- VI1_3_A_MARK, FD4_B_MARK, LCD_DATA4_B_MARK,
- VI1_4_A_MARK, FD5_B_MARK, LCD_DATA5_B_MARK,
- VI1_5_A_MARK, FD6_B_MARK, LCD_DATA6_B_MARK,
- VI1_6_A_MARK, FD7_B_MARK, LCD_DATA7_B_MARK,
- VI1_7_A_MARK, FCE_B_MARK, LCD_DATA8_B_MARK,
- SSI_SCK0_A_MARK, TIOC1A_B_MARK, LCD_DATA9_B_MARK,
- SSI_WS0_A_MARK, TIOC1B_B_MARK, LCD_DATA10_B_MARK,
- SSI_SDATA0_A_MARK, VI1_0_B_MARK, TIOC2A_B_MARK, LCD_DATA11_B_MARK,
- SSI_SCK1_A_MARK, VI1_1_B_MARK, TIOC2B_B_MARK, LCD_DATA12_B_MARK,
- SSI_WS1_A_MARK, VI1_2_B_MARK, LCD_DATA13_B_MARK,
- SSI_SDATA1_A_MARK, VI1_3_B_MARK, LCD_DATA14_B_MARK,
-
- /* IPSR10 */
- SSI_SCK23_MARK, VI1_4_B_MARK, RX1_D_MARK, FCLE_B_MARK,
- LCD_DATA15_B_MARK,
- SSI_WS23_MARK, VI1_5_B_MARK, TX1_D_MARK, HSCK0_C_MARK,
- FALE_B_MARK, LCD_DON_B_MARK,
- SSI_SDATA2_MARK, VI1_6_B_MARK, HRX0_C_MARK, FRE_B_MARK,
- LCD_CL1_B_MARK,
- SSI_SDATA3_MARK, VI1_7_B_MARK, HTX0_C_MARK, FWE_B_MARK,
- LCD_CL2_B_MARK,
- AUDIO_CLKA_A_MARK, VI1_CLK_B_MARK, SCK1_D_MARK, IECLK_B_MARK,
- LCD_FLM_B_MARK,
- AUDIO_CLKB_A_MARK, LCD_CLK_B_MARK,
- AUDIO_CLKC_MARK, SCK1_E_MARK, HCTS0_C_MARK, FRB_B_MARK,
- LCD_VEPWC_B_MARK,
- AUDIO_CLKOUT_MARK, TX1_E_MARK, HRTS0_C_MARK, FSE_B_MARK,
- LCD_M_DISP_B_MARK,
- CAN_CLK_A_MARK, RX4_D_MARK,
- CAN0_TX_A_MARK, TX4_D_MARK, MLB_CLK_MARK,
- CAN1_RX_A_MARK, IRQ1_B_MARK,
- CAN0_RX_A_MARK, IRQ0_B_MARK, MLB_SIG_MARK,
- CAN1_TX_A_MARK, TX5_C_MARK, MLB_DAT_MARK,
-
- /* IPSR11 */
- SCL1_MARK, SCIF_CLK_C_MARK,
- SDA1_MARK, RX1_E_MARK,
- SDA0_MARK, HIFEBL_A_MARK,
- SDSELF_MARK, RTS1_E_MARK,
- SCIF_CLK_A_MARK, HSPI_CLK_A_MARK, VI0_CLK_MARK, RMII0_TXD0_A_MARK,
- ET0_ERXD4_MARK,
- SCK0_A_MARK, HSPI_CS_A_MARK, VI0_CLKENB_MARK, RMII0_TXD1_A_MARK,
- ET0_ERXD5_MARK,
- RX0_A_MARK, HSPI_RX_A_MARK, RMII0_RXD0_A_MARK, ET0_ERXD6_MARK,
- TX0_A_MARK, HSPI_TX_A_MARK,
- PENC1_MARK, TX3_D_MARK, CAN1_TX_B_MARK, TX5_D_MARK,
- IETX_B_MARK,
- USB_OVC1_MARK, RX3_D_MARK, CAN1_RX_B_MARK, RX5_D_MARK,
- IERX_B_MARK,
- DREQ0_MARK, SD1_CLK_A_MARK, ET0_TX_EN_MARK,
- DACK0_MARK, SD1_DAT3_A_MARK, ET0_TX_ER_MARK,
- DREQ1_MARK, HSPI_CLK_B_MARK, RX4_B_MARK, ET0_PHY_INT_C_MARK,
- ET0_TX_CLK_A_MARK,
- DACK1_MARK, HSPI_CS_B_MARK, TX4_B_MARK, ET0_RX_CLK_A_MARK,
- PRESETOUT_MARK, ST_CLKOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
-
- PINMUX_SINGLE(CLKOUT),
- PINMUX_SINGLE(BS),
- PINMUX_SINGLE(CS0),
- PINMUX_SINGLE(EX_CS0),
- PINMUX_SINGLE(RD),
- PINMUX_SINGLE(WE0),
- PINMUX_SINGLE(WE1),
- PINMUX_SINGLE(SCL0),
- PINMUX_SINGLE(PENC0),
- PINMUX_SINGLE(USB_OVC0),
- PINMUX_SINGLE(IRQ2_B),
- PINMUX_SINGLE(IRQ3_B),
-
- /* IPSR0 */
- PINMUX_IPSR_GPSR(IP0_1_0, A0),
- PINMUX_IPSR_GPSR(IP0_1_0, ST0_CLKIN),
- PINMUX_IPSR_MSEL(IP0_1_0, LCD_DATA0_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_1_0, TCLKA_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_3_2, A1),
- PINMUX_IPSR_GPSR(IP0_3_2, ST0_REQ),
- PINMUX_IPSR_MSEL(IP0_3_2, LCD_DATA1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_3_2, TCLKB_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_5_4, A2),
- PINMUX_IPSR_GPSR(IP0_5_4, ST0_SYC),
- PINMUX_IPSR_MSEL(IP0_5_4, LCD_DATA2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_5_4, TCLKC_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_7_6, A3),
- PINMUX_IPSR_GPSR(IP0_7_6, ST0_VLD),
- PINMUX_IPSR_MSEL(IP0_7_6, LCD_DATA3_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_7_6, TCLKD_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_9_8, A4),
- PINMUX_IPSR_GPSR(IP0_9_8, ST0_D0),
- PINMUX_IPSR_MSEL(IP0_9_8, LCD_DATA4_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_9_8, TIOC0A_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_11_10, A5),
- PINMUX_IPSR_GPSR(IP0_11_10, ST0_D1),
- PINMUX_IPSR_MSEL(IP0_11_10, LCD_DATA5_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_11_10, TIOC0B_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_13_12, A6),
- PINMUX_IPSR_GPSR(IP0_13_12, ST0_D2),
- PINMUX_IPSR_MSEL(IP0_13_12, LCD_DATA6_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_13_12, TIOC0C_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_15_14, A7),
- PINMUX_IPSR_GPSR(IP0_15_14, ST0_D3),
- PINMUX_IPSR_MSEL(IP0_15_14, LCD_DATA7_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_15_14, TIOC0D_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_17_16, A8),
- PINMUX_IPSR_GPSR(IP0_17_16, ST0_D4),
- PINMUX_IPSR_MSEL(IP0_17_16, LCD_DATA8_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_17_16, TIOC1A_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_19_18, A9),
- PINMUX_IPSR_GPSR(IP0_19_18, ST0_D5),
- PINMUX_IPSR_MSEL(IP0_19_18, LCD_DATA9_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_19_18, TIOC1B_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_21_20, A10),
- PINMUX_IPSR_GPSR(IP0_21_20, ST0_D6),
- PINMUX_IPSR_MSEL(IP0_21_20, LCD_DATA10_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_21_20, TIOC2A_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_23_22, A11),
- PINMUX_IPSR_GPSR(IP0_23_22, ST0_D7),
- PINMUX_IPSR_MSEL(IP0_23_22, LCD_DATA11_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_23_22, TIOC2B_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_25_24, A12),
- PINMUX_IPSR_MSEL(IP0_25_24, LCD_DATA12_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_25_24, TIOC3A_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_27_26, A13),
- PINMUX_IPSR_MSEL(IP0_27_26, LCD_DATA13_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_27_26, TIOC3B_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_29_28, A14),
- PINMUX_IPSR_MSEL(IP0_29_28, LCD_DATA14_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_29_28, TIOC3C_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_31_30, A15),
- PINMUX_IPSR_GPSR(IP0_31_30, ST0_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP0_31_30, LCD_DATA15_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_31_30, TIOC3D_C, SEL_MTU2_CH3_1),
-
-
- /* IPSR1 */
- PINMUX_IPSR_GPSR(IP1_1_0, A16),
- PINMUX_IPSR_GPSR(IP1_1_0, ST0_PWM),
- PINMUX_IPSR_MSEL(IP1_1_0, LCD_DON_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_1_0, TIOC4A_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_3_2, A17),
- PINMUX_IPSR_GPSR(IP1_3_2, ST1_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP1_3_2, LCD_CL1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_3_2, TIOC4B_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_5_4, A18),
- PINMUX_IPSR_GPSR(IP1_5_4, ST1_PWM),
- PINMUX_IPSR_MSEL(IP1_5_4, LCD_CL2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_5_4, TIOC4C_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_7_6, A19),
- PINMUX_IPSR_GPSR(IP1_7_6, ST1_CLKIN),
- PINMUX_IPSR_MSEL(IP1_7_6, LCD_CLK_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_7_6, TIOC4D_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_9_8, A20),
- PINMUX_IPSR_GPSR(IP1_9_8, ST1_REQ),
- PINMUX_IPSR_MSEL(IP1_9_8, LCD_FLM_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_11_10, A21),
- PINMUX_IPSR_GPSR(IP1_11_10, ST1_SYC),
- PINMUX_IPSR_MSEL(IP1_11_10, LCD_VCPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_13_12, A22),
- PINMUX_IPSR_GPSR(IP1_13_12, ST1_VLD),
- PINMUX_IPSR_MSEL(IP1_13_12, LCD_VEPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_15_14, A23),
- PINMUX_IPSR_GPSR(IP1_15_14, ST1_D0),
- PINMUX_IPSR_MSEL(IP1_15_14, LCD_M_DISP_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_17_16, A24),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D1),
-
- PINMUX_IPSR_GPSR(IP1_19_18, A25),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D2),
-
- PINMUX_IPSR_GPSR(IP1_22_20, D0),
- PINMUX_IPSR_MSEL(IP1_22_20, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_22_20, MMC_D0_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_22_20, ST1_D3),
- PINMUX_IPSR_MSEL(IP1_22_20, FD0_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_25_23, D1),
- PINMUX_IPSR_MSEL(IP1_25_23, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_25_23, MMC_D1_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_25_23, ST1_D4),
- PINMUX_IPSR_MSEL(IP1_25_23, FD1_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_28_26, D2),
- PINMUX_IPSR_MSEL(IP1_28_26, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_28_26, MMC_D2_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_28_26, ST1_D5),
- PINMUX_IPSR_MSEL(IP1_28_26, FD2_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_31_29, D3),
- PINMUX_IPSR_MSEL(IP1_31_29, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_31_29, MMC_D3_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_31_29, ST1_D6),
- PINMUX_IPSR_MSEL(IP1_31_29, FD3_A, SEL_FLCTL_0),
-
- /* IPSR2 */
- PINMUX_IPSR_GPSR(IP2_2_0, D4),
- PINMUX_IPSR_MSEL(IP2_2_0, SD0_CD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_2_0, MMC_D4_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP2_2_0, ST1_D7),
- PINMUX_IPSR_MSEL(IP2_2_0, FD4_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_4_3, D5),
- PINMUX_IPSR_MSEL(IP2_4_3, SD0_WP_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_4_3, MMC_D5_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_4_3, FD5_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_7_5, D6),
- PINMUX_IPSR_MSEL(IP2_7_5, RSPI_RSPCK_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, MMC_D6_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_7_5, QSPCLK_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, FD6_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_10_8, D7),
- PINMUX_IPSR_MSEL(IP2_10_8, RSPI_SSL_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, MMC_D7_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_10_8, QSSL_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, FD7_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_13_11, D8),
- PINMUX_IPSR_MSEL(IP2_13_11, SD0_CLK_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_13_11, MMC_CLK_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_13_11, QIO2_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_13_11, FCE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_13_11, ET0_GTX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_16_14, D9),
- PINMUX_IPSR_MSEL(IP2_16_14, SD0_CMD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_16_14, MMC_CMD_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_16_14, QIO3_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_16_14, FCLE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_16_14, ET0_ETXD1_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_19_17, D10),
- PINMUX_IPSR_MSEL(IP2_19_17, RSPI_MOSI_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, QMO_QIO0_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, FALE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_19_17, ET0_ETXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_22_20, D11),
- PINMUX_IPSR_MSEL(IP2_22_20, RSPI_MISO_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, QMI_QIO1_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, FRE_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_24_23, D12),
- PINMUX_IPSR_MSEL(IP2_24_23, FWE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_24_23, ET0_ETXD5_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_27_25, D13),
- PINMUX_IPSR_MSEL(IP2_27_25, RX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_27_25, FRB_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_27_25, ET0_ETXD6_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_30_28, D14),
- PINMUX_IPSR_MSEL(IP2_30_28, TX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_30_28, FSE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_30_28, ET0_TX_CLK_B, SEL_ET0_1),
-
- /* IPSR3 */
- PINMUX_IPSR_GPSR(IP3_1_0, D15),
- PINMUX_IPSR_MSEL(IP3_1_0, SCK2_B, SEL_SCIF2_1),
-
- PINMUX_IPSR_GPSR(IP3_2, CS1_A26),
- PINMUX_IPSR_MSEL(IP3_2, QIO3_B, SEL_RQSPI_1),
-
- PINMUX_IPSR_GPSR(IP3_5_3, EX_CS1),
- PINMUX_IPSR_MSEL(IP3_5_3, RX3_B, SEL_SCIF2_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ATACS0),
- PINMUX_IPSR_MSEL(IP3_5_3, QIO2_B, SEL_RQSPI_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ET0_ETXD0),
-
- PINMUX_IPSR_GPSR(IP3_8_6, EX_CS2),
- PINMUX_IPSR_MSEL(IP3_8_6, TX3_B, SEL_SCIF3_1),
- PINMUX_IPSR_GPSR(IP3_8_6, ATACS1),
- PINMUX_IPSR_MSEL(IP3_8_6, QSPCLK_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_8_6, ET0_GTX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_11_9, EX_CS3),
- PINMUX_IPSR_MSEL(IP3_11_9, SD1_CD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_11_9, ATARD),
- PINMUX_IPSR_MSEL(IP3_11_9, QMO_QIO0_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_11_9, ET0_ETXD1_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_14_12, EX_CS4),
- PINMUX_IPSR_MSEL(IP3_14_12, SD1_WP_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_14_12, ATAWR),
- PINMUX_IPSR_MSEL(IP3_14_12, QMI_QIO1_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_14_12, ET0_ETXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_17_15, EX_CS5),
- PINMUX_IPSR_MSEL(IP3_17_15, SD1_CMD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_17_15, ATADIR),
- PINMUX_IPSR_MSEL(IP3_17_15, QSSL_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_17_15, ET0_ETXD3_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_19_18, RD_WR),
- PINMUX_IPSR_GPSR(IP3_19_18, TCLK0),
- PINMUX_IPSR_MSEL(IP3_19_18, CAN_CLK_B, SEL_RCAN_CLK_1),
- PINMUX_IPSR_GPSR(IP3_19_18, ET0_ETXD4),
-
- PINMUX_IPSR_GPSR(IP3_20, EX_WAIT0),
- PINMUX_IPSR_MSEL(IP3_20, TCLK1_B, SEL_TMU_1),
-
- PINMUX_IPSR_GPSR(IP3_23_21, EX_WAIT1),
- PINMUX_IPSR_MSEL(IP3_23_21, SD1_DAT0_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_23_21, DREQ2),
- PINMUX_IPSR_MSEL(IP3_23_21, CAN1_TX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_LINK_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_ETXD5_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_26_24, EX_WAIT2),
- PINMUX_IPSR_MSEL(IP3_26_24, SD1_DAT1_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_26_24, DACK2),
- PINMUX_IPSR_MSEL(IP3_26_24, CAN1_RX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_MAGIC_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_ETXD6_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_29_27, DRACK0),
- PINMUX_IPSR_MSEL(IP3_29_27, SD1_DAT2_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ATAG),
- PINMUX_IPSR_MSEL(IP3_29_27, TCLK1_A, SEL_TMU_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ET0_ETXD7),
-
- /* IPSR4 */
- PINMUX_IPSR_MSEL(IP4_2_0, HCTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_2_0, CTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_2_0, VI0_FIELD),
- PINMUX_IPSR_MSEL(IP4_2_0, RMII0_RXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_2_0, ET0_ERXD7),
-
- PINMUX_IPSR_MSEL(IP4_5_3, HRTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_5_3, RTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_5_3, VI0_HSYNC),
- PINMUX_IPSR_MSEL(IP4_5_3, RMII0_TXD_EN_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_5_3, ET0_RX_DV),
-
- PINMUX_IPSR_MSEL(IP4_8_6, HSCK0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_8_6, SCK1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_VSYNC),
- PINMUX_IPSR_MSEL(IP4_8_6, RMII0_RX_ER_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_8_6, ET0_RX_ER),
-
- PINMUX_IPSR_MSEL(IP4_11_9, HRX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_11_9, RX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_11_9, VI0_DATA0_VI0_B0),
- PINMUX_IPSR_MSEL(IP4_11_9, RMII0_CRS_DV_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_11_9, ET0_CRS),
-
- PINMUX_IPSR_MSEL(IP4_14_12, HTX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_14_12, TX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_14_12, VI0_DATA1_VI0_B1),
- PINMUX_IPSR_MSEL(IP4_14_12, RMII0_MDC_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_14_12, ET0_COL),
-
- PINMUX_IPSR_MSEL(IP4_17_15, CTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_17_15, VI0_DATA2_VI0_B2),
- PINMUX_IPSR_MSEL(IP4_17_15, RMII0_MDIO_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_17_15, ET0_MDC),
-
- PINMUX_IPSR_MSEL(IP4_19_18, RTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_19_18, VI0_DATA3_VI0_B3),
- PINMUX_IPSR_MSEL(IP4_19_18, ET0_MDIO_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP4_21_20, SCK1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_21_20, VI0_DATA4_VI0_B4),
- PINMUX_IPSR_MSEL(IP4_21_20, ET0_LINK_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_23_22, RX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_23_22, VI0_DATA5_VI0_B5),
- PINMUX_IPSR_MSEL(IP4_23_22, ET0_MAGIC_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_25_24, TX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_25_24, VI0_DATA6_VI0_G0),
- PINMUX_IPSR_MSEL(IP4_25_24, ET0_PHY_INT_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_27_26, CTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_27_26, VI0_DATA7_VI0_G1),
-
- PINMUX_IPSR_MSEL(IP4_29_28, RTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_29_28, VI0_G2),
-
- PINMUX_IPSR_MSEL(IP4_31_30, SCK2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP4_31_30, VI0_G3),
-
- /* IPSR5 */
- PINMUX_IPSR_MSEL(IP5_2_0, SD2_CLK_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_2_0, RX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_2_0, VI0_G4),
- PINMUX_IPSR_MSEL(IP5_2_0, ET0_RX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_5_3, SD2_CMD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_5_3, TX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_5_3, VI0_G5),
- PINMUX_IPSR_MSEL(IP5_5_3, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_8_6, SD2_DAT0_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_8_6, RX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_R0),
- PINMUX_IPSR_MSEL(IP4_8_6, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_11_9, SD2_DAT1_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_11_9, TX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP5_11_9, VI0_R1),
- PINMUX_IPSR_MSEL(IP5_11_9, ET0_MDIO_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_14_12, SD2_DAT2_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_14_12, RX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_14_12, VI0_R2),
- PINMUX_IPSR_MSEL(IP5_14_12, ET0_LINK_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_17_15, SD2_DAT3_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_17_15, TX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_17_15, VI0_R3),
- PINMUX_IPSR_MSEL(IP5_17_15, ET0_MAGIC_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_20_18, SD2_CD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_20_18, RX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_20_18, VI0_R4),
- PINMUX_IPSR_MSEL(IP5_20_18, ET0_PHY_INT_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_22_21, SD2_WP_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_22_21, TX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_22_21, VI0_R5),
-
- PINMUX_IPSR_GPSR(IP5_24_23, REF125CK),
- PINMUX_IPSR_GPSR(IP5_24_23, ADTRG),
- PINMUX_IPSR_MSEL(IP5_24_23, RX5_C, SEL_SCIF5_2),
- PINMUX_IPSR_GPSR(IP5_26_25, REF50CK),
- PINMUX_IPSR_MSEL(IP5_26_25, CTS1_E, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP5_26_25, HCTS0_D, SEL_HSCIF_3),
-
- /* IPSR6 */
- PINMUX_IPSR_GPSR(IP6_2_0, DU0_DR0),
- PINMUX_IPSR_MSEL(IP6_2_0, SCIF_CLK_B, SEL_SCIF_CLK_1),
- PINMUX_IPSR_MSEL(IP6_2_0, HRX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_2_0, IETX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_2_0, TCLKA_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_2_0, HIFD00),
-
- PINMUX_IPSR_GPSR(IP6_5_3, DU0_DR1),
- PINMUX_IPSR_MSEL(IP6_5_3, SCK0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_5_3, HTX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_5_3, IERX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_5_3, TCLKB_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_5_3, HIFD01),
-
- PINMUX_IPSR_GPSR(IP6_7_6, DU0_DR2),
- PINMUX_IPSR_MSEL(IP6_7_6, RX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_7_6, TCLKC_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_7_6, HIFD02),
-
- PINMUX_IPSR_GPSR(IP6_9_8, DU0_DR3),
- PINMUX_IPSR_MSEL(IP6_9_8, TX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_9_8, TCLKD_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_9_8, HIFD03),
-
- PINMUX_IPSR_GPSR(IP6_11_10, DU0_DR4),
- PINMUX_IPSR_MSEL(IP6_11_10, CTS0_C, SEL_SCIF0_2),
- PINMUX_IPSR_MSEL(IP6_11_10, TIOC0A_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_11_10, HIFD04),
-
- PINMUX_IPSR_GPSR(IP6_13_12, DU0_DR5),
- PINMUX_IPSR_MSEL(IP6_13_12, RTS0_C, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_13_12, TIOC0B_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_13_12, HIFD05),
-
- PINMUX_IPSR_GPSR(IP6_15_14, DU0_DR6),
- PINMUX_IPSR_MSEL(IP6_15_14, SCK1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_15_14, TIOC0C_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_15_14, HIFD06),
-
- PINMUX_IPSR_GPSR(IP6_17_16, DU0_DR7),
- PINMUX_IPSR_MSEL(IP6_17_16, RX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_17_16, TIOC0D_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_17_16, HIFD07),
-
- PINMUX_IPSR_GPSR(IP6_20_18, DU0_DG0),
- PINMUX_IPSR_MSEL(IP6_20_18, TX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_20_18, HSCK0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_20_18, IECLK_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_20_18, TIOC1A_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_20_18, HIFD08),
-
- PINMUX_IPSR_GPSR(IP6_23_21, DU0_DG1),
- PINMUX_IPSR_MSEL(IP6_23_21, CTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_23_21, HRTS0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_23_21, TIOC1B_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_23_21, HIFD09),
-
- /* IPSR7 */
- PINMUX_IPSR_GPSR(IP7_2_0, DU0_DG2),
- PINMUX_IPSR_MSEL(IP7_2_0, RTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP7_2_0, RMII0_MDC_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_2_0, TIOC2A_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_2_0, HIFD10),
-
- PINMUX_IPSR_GPSR(IP7_5_3, DU0_DG3),
- PINMUX_IPSR_MSEL(IP7_5_3, SCK2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_5_3, RMII0_MDIO_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_5_3, TIOC2B_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_5_3, HIFD11),
-
- PINMUX_IPSR_GPSR(IP7_8_6, DU0_DG4),
- PINMUX_IPSR_MSEL(IP7_8_6, RX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_8_6, RMII0_CRS_DV_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_8_6, TIOC3A_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_8_6, HIFD12),
-
- PINMUX_IPSR_GPSR(IP7_11_9, DU0_DG5),
- PINMUX_IPSR_MSEL(IP7_11_9, TX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_11_9, RMII0_RX_ER_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_11_9, TIOC3B_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_11_9, HIFD13),
-
- PINMUX_IPSR_GPSR(IP7_14_12, DU0_DG6),
- PINMUX_IPSR_MSEL(IP7_14_12, RX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_14_12, RMII0_RXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_14_12, TIOC3C_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_14_12, HIFD14),
-
- PINMUX_IPSR_GPSR(IP7_17_15, DU0_DG7),
- PINMUX_IPSR_MSEL(IP7_17_15, TX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_17_15, RMII0_RXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_17_15, TIOC3D_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_17_15, HIFD15),
-
- PINMUX_IPSR_GPSR(IP7_20_18, DU0_DB0),
- PINMUX_IPSR_MSEL(IP7_20_18, RX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_20_18, RMII0_TXD_EN_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_20_18, TIOC4A_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_20_18, HIFCS),
-
- PINMUX_IPSR_GPSR(IP7_23_21, DU0_DB1),
- PINMUX_IPSR_MSEL(IP7_23_21, TX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_23_21, RMII0_TXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_23_21, TIOC4B_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_23_21, HIFWR),
-
- PINMUX_IPSR_GPSR(IP7_26_24, DU0_DB2),
- PINMUX_IPSR_MSEL(IP7_26_24, RX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_26_24, RMII0_TXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_26_24, TIOC4C_A, SEL_MTU2_CH4_0),
-
- PINMUX_IPSR_GPSR(IP7_28_27, DU0_DB3),
- PINMUX_IPSR_MSEL(IP7_28_27, TX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_28_27, TIOC4D_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_28_27, HIFRD),
-
- PINMUX_IPSR_GPSR(IP7_30_29, DU0_DB4),
- PINMUX_IPSR_GPSR(IP7_30_29, HIFINT),
-
- /* IPSR8 */
- PINMUX_IPSR_GPSR(IP8_1_0, DU0_DB5),
- PINMUX_IPSR_GPSR(IP8_1_0, HIFDREQ),
-
- PINMUX_IPSR_GPSR(IP8_3_2, DU0_DB6),
- PINMUX_IPSR_GPSR(IP8_3_2, HIFRDY),
-
- PINMUX_IPSR_GPSR(IP8_5_4, DU0_DB7),
- PINMUX_IPSR_MSEL(IP8_5_4, SSI_SCK0_B, SEL_SSI0_1),
- PINMUX_IPSR_MSEL(IP8_5_4, HIFEBL_B, SEL_HIF_1),
-
- PINMUX_IPSR_GPSR(IP8_7_6, DU0_DOTCLKIN),
- PINMUX_IPSR_MSEL(IP8_7_6, HSPI_CS0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_7_6, SSI_WS0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_9_8, DU0_DOTCLKOUT),
- PINMUX_IPSR_MSEL(IP8_9_8, HSPI_CLK0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_9_8, SSI_SDATA0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_11_10, DU0_EXHSYNC_DU0_HSYNC),
- PINMUX_IPSR_MSEL(IP8_11_10, HSPI_TX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_11_10, SSI_SCK1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_13_12, DU0_EXVSYNC_DU0_VSYNC),
- PINMUX_IPSR_MSEL(IP8_13_12, HSPI_RX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_13_12, SSI_WS1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_15_14, DU0_EXODDF_DU0_ODDF),
- PINMUX_IPSR_MSEL(IP8_15_14, CAN0_RX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_15_14, HSCK0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_15_14, SSI_SDATA1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_17_16, DU0_DISP),
- PINMUX_IPSR_MSEL(IP8_17_16, CAN0_TX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_17_16, HRX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_17_16, AUDIO_CLKA_B, SEL_AUDIO_CLKA_1),
-
- PINMUX_IPSR_GPSR(IP8_19_18, DU0_CDE),
- PINMUX_IPSR_MSEL(IP8_19_18, HTX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_19_18, AUDIO_CLKB_B, SEL_AUDIO_CLKB_1),
- PINMUX_IPSR_MSEL(IP8_19_18, LCD_VCPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP8_22_20, IRQ0_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_22_20, HSPI_TX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_22_20, RX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_22_20, ET0_ERXD0),
-
- PINMUX_IPSR_MSEL(IP8_25_23, IRQ1_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_25_23, HSPI_RX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_25_23, TX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_25_23, ET0_ERXD1),
-
- PINMUX_IPSR_MSEL(IP8_27_26, IRQ2_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_27_26, CTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_27_26, HCTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_27_26, ET0_ERXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP8_29_28, IRQ3_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_29_28, RTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_29_28, HRTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_29_28, ET0_ERXD3_A, SEL_ET0_0),
-
- /* IPSR9 */
- PINMUX_IPSR_MSEL(IP9_1_0, VI1_CLK_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_1_0, FD0_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_1_0, LCD_DATA0_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_3_2, VI1_0_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_3_2, FD1_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_3_2, LCD_DATA1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_5_4, VI1_1_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_5_4, FD2_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_5_4, LCD_DATA2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_7_6, VI1_2_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_7_6, FD3_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_7_6, LCD_DATA3_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_9_8, VI1_3_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_9_8, FD4_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_9_8, LCD_DATA4_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_11_10, VI1_4_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_11_10, FD5_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_11_10, LCD_DATA5_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_13_12, VI1_5_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_13_12, FD6_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_13_12, LCD_DATA6_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_15_14, VI1_6_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_15_14, FD7_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_15_14, LCD_DATA7_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_17_16, VI1_7_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_17_16, FCE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_17_16, LCD_DATA8_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_19_18, SSI_SCK0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_19_18, TIOC1A_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_19_18, LCD_DATA9_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_21_20, SSI_WS0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_21_20, TIOC1B_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_21_20, LCD_DATA10_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_23_22, SSI_SDATA0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_23_22, VI1_0_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_23_22, TIOC2A_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_23_22, LCD_DATA11_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_25_24, SSI_SCK1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_25_24, VI1_1_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_25_24, TIOC2B_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_25_24, LCD_DATA12_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_27_26, SSI_WS1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_27_26, VI1_2_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_27_26, LCD_DATA13_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_29_28, SSI_SDATA1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_29_28, VI1_3_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_29_28, LCD_DATA14_B, SEL_LCDC_1),
-
- /* IPSE10 */
- PINMUX_IPSR_GPSR(IP10_2_0, SSI_SCK23),
- PINMUX_IPSR_MSEL(IP10_2_0, VI1_4_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_2_0, RX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_2_0, FCLE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_2_0, LCD_DATA15_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_5_3, SSI_WS23),
- PINMUX_IPSR_MSEL(IP10_5_3, VI1_5_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_5_3, TX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_5_3, HSCK0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_5_3, FALE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_5_3, LCD_DON_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_8_6, SSI_SDATA2),
- PINMUX_IPSR_MSEL(IP10_8_6, VI1_6_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_8_6, HRX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_8_6, FRE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_8_6, LCD_CL1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_11_9, SSI_SDATA3),
- PINMUX_IPSR_MSEL(IP10_11_9, VI1_7_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_11_9, HTX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_11_9, FWE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_11_9, LCD_CL2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_14_12, AUDIO_CLKA_A, SEL_AUDIO_CLKA_0),
- PINMUX_IPSR_MSEL(IP10_14_12, VI1_CLK_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_14_12, SCK1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_14_12, IECLK_B, SEL_IEBUS_1),
- PINMUX_IPSR_MSEL(IP10_14_12, LCD_FLM_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_15, AUDIO_CLKB_A, SEL_AUDIO_CLKB_0),
- PINMUX_IPSR_MSEL(IP10_15, LCD_CLK_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_18_16, AUDIO_CLKC),
- PINMUX_IPSR_MSEL(IP10_18_16, SCK1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_18_16, HCTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_18_16, FRB_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_18_16, LCD_VEPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_21_19, AUDIO_CLKOUT),
- PINMUX_IPSR_MSEL(IP10_21_19, TX1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_21_19, HRTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_21_19, FSE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_21_19, LCD_M_DISP_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_22, CAN_CLK_A, SEL_RCAN_CLK_0),
- PINMUX_IPSR_MSEL(IP10_22, RX4_D, SEL_SCIF4_3),
-
- PINMUX_IPSR_MSEL(IP10_24_23, CAN0_TX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_24_23, TX4_D, SEL_SCIF4_3),
- PINMUX_IPSR_GPSR(IP10_24_23, MLB_CLK),
-
- PINMUX_IPSR_MSEL(IP10_25, CAN1_RX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_25, IRQ1_B, SEL_INTC_1),
-
- PINMUX_IPSR_MSEL(IP10_27_26, CAN0_RX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_27_26, IRQ0_B, SEL_INTC_1),
- PINMUX_IPSR_GPSR(IP10_27_26, MLB_SIG),
-
- PINMUX_IPSR_MSEL(IP10_29_28, CAN1_TX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_29_28, TX5_C, SEL_SCIF1_2),
- PINMUX_IPSR_GPSR(IP10_29_28, MLB_DAT),
-
- /* IPSR11 */
- PINMUX_IPSR_GPSR(IP11_0, SCL1),
- PINMUX_IPSR_MSEL(IP11_0, SCIF_CLK_C, SEL_SCIF_CLK_2),
-
- PINMUX_IPSR_GPSR(IP11_1, SDA1),
- PINMUX_IPSR_MSEL(IP11_0, RX1_E, SEL_SCIF1_4),
-
- PINMUX_IPSR_GPSR(IP11_2, SDA0),
- PINMUX_IPSR_MSEL(IP11_2, HIFEBL_A, SEL_HIF_0),
-
- PINMUX_IPSR_GPSR(IP11_3, SDSELF),
- PINMUX_IPSR_MSEL(IP11_3, RTS1_E, SEL_SCIF1_3),
-
- PINMUX_IPSR_MSEL(IP11_6_4, SCIF_CLK_A, SEL_SCIF_CLK_0),
- PINMUX_IPSR_MSEL(IP11_6_4, HSPI_CLK_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_6_4, VI0_CLK),
- PINMUX_IPSR_MSEL(IP11_6_4, RMII0_TXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_6_4, ET0_ERXD4),
-
- PINMUX_IPSR_MSEL(IP11_9_7, SCK0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_9_7, HSPI_CS_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_9_7, VI0_CLKENB),
- PINMUX_IPSR_MSEL(IP11_9_7, RMII0_TXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_9_7, ET0_ERXD5),
-
- PINMUX_IPSR_MSEL(IP11_11_10, RX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_11_10, HSPI_RX_A, SEL_HSPI_0),
- PINMUX_IPSR_MSEL(IP11_11_10, RMII0_RXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_11_10, ET0_ERXD6),
-
- PINMUX_IPSR_MSEL(IP11_12, TX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_12, HSPI_TX_A, SEL_HSPI_0),
-
- PINMUX_IPSR_GPSR(IP11_15_13, PENC1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_15_13, CAN1_TX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_15_13, IETX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_18_16, USB_OVC1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_18_16, CAN1_RX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_18_16, IERX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_20_19, DREQ0),
- PINMUX_IPSR_MSEL(IP11_20_19, SD1_CLK_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_20_19, ET0_TX_EN),
-
- PINMUX_IPSR_GPSR(IP11_22_21, DACK0),
- PINMUX_IPSR_MSEL(IP11_22_21, SD1_DAT3_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_22_21, ET0_TX_ER),
-
- PINMUX_IPSR_GPSR(IP11_25_23, DREQ1),
- PINMUX_IPSR_MSEL(IP11_25_23, HSPI_CLK_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_25_23, RX4_B, SEL_SCIF4_1),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_PHY_INT_C, SEL_ET0_CTL_0),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_TX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_27_26, DACK1),
- PINMUX_IPSR_MSEL(IP11_27_26, HSPI_CS_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_27_26, TX4_B, SEL_SCIF3_1),
- PINMUX_IPSR_MSEL(IP11_27_26, ET0_RX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_28, PRESETOUT),
- PINMUX_IPSR_GPSR(IP11_28, ST_CLKOUT),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- PINMUX_GPIO_GP_ALL(),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- GPIO_FN(CLKOUT), GPIO_FN(BS), GPIO_FN(CS0), GPIO_FN(EX_CS0),
- GPIO_FN(RD), GPIO_FN(WE0), GPIO_FN(WE1),
- GPIO_FN(SCL0), GPIO_FN(PENC0), GPIO_FN(USB_OVC0),
- GPIO_FN(IRQ2_B), GPIO_FN(IRQ3_B),
-
- /* IPSR0 */
- GPIO_FN(A0), GPIO_FN(ST0_CLKIN), GPIO_FN(LCD_DATA0_A),
- GPIO_FN(TCLKA_C),
- GPIO_FN(A1), GPIO_FN(ST0_REQ), GPIO_FN(LCD_DATA1_A),
- GPIO_FN(TCLKB_C),
- GPIO_FN(A2), GPIO_FN(ST0_SYC), GPIO_FN(LCD_DATA2_A),
- GPIO_FN(TCLKC_C),
- GPIO_FN(A3), GPIO_FN(ST0_VLD), GPIO_FN(LCD_DATA3_A),
- GPIO_FN(TCLKD_C),
- GPIO_FN(A4), GPIO_FN(ST0_D0), GPIO_FN(LCD_DATA4_A),
- GPIO_FN(TIOC0A_C),
- GPIO_FN(A5), GPIO_FN(ST0_D1), GPIO_FN(LCD_DATA5_A),
- GPIO_FN(TIOC0B_C),
- GPIO_FN(A6), GPIO_FN(ST0_D2), GPIO_FN(LCD_DATA6_A),
- GPIO_FN(TIOC0C_C),
- GPIO_FN(A7), GPIO_FN(ST0_D3), GPIO_FN(LCD_DATA7_A),
- GPIO_FN(TIOC0D_C),
- GPIO_FN(A8), GPIO_FN(ST0_D4), GPIO_FN(LCD_DATA8_A),
- GPIO_FN(TIOC1A_C),
- GPIO_FN(A9), GPIO_FN(ST0_D5), GPIO_FN(LCD_DATA9_A),
- GPIO_FN(TIOC1B_C),
- GPIO_FN(A10), GPIO_FN(ST0_D6), GPIO_FN(LCD_DATA10_A),
- GPIO_FN(TIOC2A_C),
- GPIO_FN(A11), GPIO_FN(ST0_D7), GPIO_FN(LCD_DATA11_A),
- GPIO_FN(TIOC2B_C),
- GPIO_FN(A12), GPIO_FN(LCD_DATA12_A), GPIO_FN(TIOC3A_C),
- GPIO_FN(A13), GPIO_FN(LCD_DATA13_A), GPIO_FN(TIOC3B_C),
- GPIO_FN(A14), GPIO_FN(LCD_DATA14_A), GPIO_FN(TIOC3C_C),
- GPIO_FN(A15), GPIO_FN(ST0_VCO_CLKIN), GPIO_FN(LCD_DATA15_A),
- GPIO_FN(TIOC3D_C),
-
- /* IPSR1 */
- GPIO_FN(A16), GPIO_FN(ST0_PWM), GPIO_FN(LCD_DON_A),
- GPIO_FN(TIOC4A_C),
- GPIO_FN(A17), GPIO_FN(ST1_VCO_CLKIN), GPIO_FN(LCD_CL1_A),
- GPIO_FN(TIOC4B_C),
- GPIO_FN(A18), GPIO_FN(ST1_PWM), GPIO_FN(LCD_CL2_A),
- GPIO_FN(TIOC4C_C),
- GPIO_FN(A19), GPIO_FN(ST1_CLKIN), GPIO_FN(LCD_CLK_A),
- GPIO_FN(TIOC4D_C),
- GPIO_FN(A20), GPIO_FN(ST1_REQ), GPIO_FN(LCD_FLM_A),
- GPIO_FN(A21), GPIO_FN(ST1_SYC), GPIO_FN(LCD_VCPWC_A),
- GPIO_FN(A22), GPIO_FN(ST1_VLD), GPIO_FN(LCD_VEPWC_A),
- GPIO_FN(A23), GPIO_FN(ST1_D0), GPIO_FN(LCD_M_DISP_A),
- GPIO_FN(A24), GPIO_FN(RX2_D), GPIO_FN(ST1_D1),
- GPIO_FN(A25), GPIO_FN(TX2_D), GPIO_FN(ST1_D2),
- GPIO_FN(D0), GPIO_FN(SD0_DAT0_A), GPIO_FN(MMC_D0_A),
- GPIO_FN(ST1_D3), GPIO_FN(FD0_A),
- GPIO_FN(D1), GPIO_FN(SD0_DAT1_A), GPIO_FN(MMC_D1_A),
- GPIO_FN(ST1_D4), GPIO_FN(FD1_A),
- GPIO_FN(D2), GPIO_FN(SD0_DAT2_A), GPIO_FN(MMC_D2_A),
- GPIO_FN(ST1_D5), GPIO_FN(FD2_A),
- GPIO_FN(D3), GPIO_FN(SD0_DAT3_A), GPIO_FN(MMC_D3_A),
- GPIO_FN(ST1_D6), GPIO_FN(FD3_A),
-
- /* IPSR2 */
- GPIO_FN(D4), GPIO_FN(SD0_CD_A), GPIO_FN(MMC_D4_A), GPIO_FN(ST1_D7),
- GPIO_FN(FD4_A),
- GPIO_FN(D5), GPIO_FN(SD0_WP_A), GPIO_FN(MMC_D5_A), GPIO_FN(FD5_A),
- GPIO_FN(D6), GPIO_FN(RSPI_RSPCK_A), GPIO_FN(MMC_D6_A),
- GPIO_FN(QSPCLK_A),
- GPIO_FN(FD6_A),
- GPIO_FN(D7), GPIO_FN(RSPI_SSL_A), GPIO_FN(MMC_D7_A), GPIO_FN(QSSL_A),
- GPIO_FN(FD7_A),
- GPIO_FN(D8), GPIO_FN(SD0_CLK_A), GPIO_FN(MMC_CLK_A), GPIO_FN(QIO2_A),
- GPIO_FN(FCE_A), GPIO_FN(ET0_GTX_CLK_B),
- GPIO_FN(D9), GPIO_FN(SD0_CMD_A), GPIO_FN(MMC_CMD_A), GPIO_FN(QIO3_A),
- GPIO_FN(FCLE_A), GPIO_FN(ET0_ETXD1_B),
- GPIO_FN(D10), GPIO_FN(RSPI_MOSI_A), GPIO_FN(QMO_QIO0_A),
- GPIO_FN(FALE_A), GPIO_FN(ET0_ETXD2_B),
- GPIO_FN(D11), GPIO_FN(RSPI_MISO_A), GPIO_FN(QMI_QIO1_A), GPIO_FN(FRE_A),
- GPIO_FN(ET0_ETXD3_B),
- GPIO_FN(D12), GPIO_FN(FWE_A), GPIO_FN(ET0_ETXD5_B),
- GPIO_FN(D13), GPIO_FN(RX2_B), GPIO_FN(FRB_A), GPIO_FN(ET0_ETXD6_B),
- GPIO_FN(D14), GPIO_FN(TX2_B), GPIO_FN(FSE_A), GPIO_FN(ET0_TX_CLK_B),
-
- /* IPSR3 */
- GPIO_FN(D15), GPIO_FN(SCK2_B),
- GPIO_FN(CS1_A26), GPIO_FN(QIO3_B),
- GPIO_FN(EX_CS1), GPIO_FN(RX3_B), GPIO_FN(ATACS0), GPIO_FN(QIO2_B),
- GPIO_FN(ET0_ETXD0),
- GPIO_FN(EX_CS2), GPIO_FN(TX3_B), GPIO_FN(ATACS1), GPIO_FN(QSPCLK_B),
- GPIO_FN(ET0_GTX_CLK_A),
- GPIO_FN(EX_CS3), GPIO_FN(SD1_CD_A), GPIO_FN(ATARD), GPIO_FN(QMO_QIO0_B),
- GPIO_FN(ET0_ETXD1_A),
- GPIO_FN(EX_CS4), GPIO_FN(SD1_WP_A), GPIO_FN(ATAWR), GPIO_FN(QMI_QIO1_B),
- GPIO_FN(ET0_ETXD2_A),
- GPIO_FN(EX_CS5), GPIO_FN(SD1_CMD_A), GPIO_FN(ATADIR), GPIO_FN(QSSL_B),
- GPIO_FN(ET0_ETXD3_A),
- GPIO_FN(RD_WR), GPIO_FN(TCLK0), GPIO_FN(CAN_CLK_B), GPIO_FN(ET0_ETXD4),
- GPIO_FN(EX_WAIT0), GPIO_FN(TCLK1_B),
- GPIO_FN(EX_WAIT1), GPIO_FN(SD1_DAT0_A), GPIO_FN(DREQ2),
- GPIO_FN(CAN1_TX_C), GPIO_FN(ET0_LINK_C), GPIO_FN(ET0_ETXD5_A),
- GPIO_FN(EX_WAIT2), GPIO_FN(SD1_DAT1_A), GPIO_FN(DACK2),
- GPIO_FN(CAN1_RX_C), GPIO_FN(ET0_MAGIC_C), GPIO_FN(ET0_ETXD6_A),
- GPIO_FN(DRACK0), GPIO_FN(SD1_DAT2_A), GPIO_FN(ATAG), GPIO_FN(TCLK1_A),
- GPIO_FN(ET0_ETXD7),
-
- /* IPSR4 */
- GPIO_FN(HCTS0_A), GPIO_FN(CTS1_A), GPIO_FN(VI0_FIELD),
- GPIO_FN(RMII0_RXD1_A), GPIO_FN(ET0_ERXD7),
- GPIO_FN(HRTS0_A), GPIO_FN(RTS1_A), GPIO_FN(VI0_HSYNC),
- GPIO_FN(RMII0_TXD_EN_A), GPIO_FN(ET0_RX_DV),
- GPIO_FN(HSCK0_A), GPIO_FN(SCK1_A), GPIO_FN(VI0_VSYNC),
- GPIO_FN(RMII0_RX_ER_A), GPIO_FN(ET0_RX_ER),
- GPIO_FN(HRX0_A), GPIO_FN(RX1_A), GPIO_FN(VI0_DATA0_VI0_B0),
- GPIO_FN(RMII0_CRS_DV_A), GPIO_FN(ET0_CRS),
- GPIO_FN(HTX0_A), GPIO_FN(TX1_A), GPIO_FN(VI0_DATA1_VI0_B1),
- GPIO_FN(RMII0_MDC_A), GPIO_FN(ET0_COL),
- GPIO_FN(CTS0_B), GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(RMII0_MDIO_A),
- GPIO_FN(ET0_MDC),
- GPIO_FN(RTS0_B), GPIO_FN(VI0_DATA3_VI0_B3), GPIO_FN(ET0_MDIO_A),
- GPIO_FN(SCK1_B), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(ET0_LINK_A),
- GPIO_FN(RX1_B), GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(ET0_MAGIC_A),
- GPIO_FN(TX1_B), GPIO_FN(VI0_DATA6_VI0_G0), GPIO_FN(ET0_PHY_INT_A),
- GPIO_FN(CTS1_B), GPIO_FN(VI0_DATA7_VI0_G1),
- GPIO_FN(RTS1_B), GPIO_FN(VI0_G2),
- GPIO_FN(SCK2_A), GPIO_FN(VI0_G3),
-
- /* IPSR5 */
- GPIO_FN(REF50CK), GPIO_FN(CTS1_E), GPIO_FN(HCTS0_D),
- GPIO_FN(REF125CK), GPIO_FN(ADTRG), GPIO_FN(RX5_C),
- GPIO_FN(SD2_WP_A), GPIO_FN(TX5_A), GPIO_FN(VI0_R5),
- GPIO_FN(SD2_CD_A), GPIO_FN(RX5_A), GPIO_FN(VI0_R4),
- GPIO_FN(ET0_PHY_INT_B),
- GPIO_FN(SD2_DAT3_A), GPIO_FN(TX4_A), GPIO_FN(VI0_R3),
- GPIO_FN(ET0_MAGIC_B),
- GPIO_FN(SD2_DAT2_A), GPIO_FN(RX4_A), GPIO_FN(VI0_R2),
- GPIO_FN(ET0_LINK_B),
- GPIO_FN(SD2_DAT1_A), GPIO_FN(TX3_A), GPIO_FN(VI0_R1),
- GPIO_FN(ET0_MDIO_B),
- GPIO_FN(SD2_DAT0_A), GPIO_FN(RX3_A), GPIO_FN(VI0_R0),
- GPIO_FN(ET0_ERXD3_B),
- GPIO_FN(SD2_CMD_A), GPIO_FN(TX2_A), GPIO_FN(VI0_G5),
- GPIO_FN(ET0_ERXD2_B),
- GPIO_FN(SD2_CLK_A), GPIO_FN(RX2_A), GPIO_FN(VI0_G4),
- GPIO_FN(ET0_RX_CLK_B),
-
- /* IPSR6 */
- GPIO_FN(DU0_DG1), GPIO_FN(CTS1_C), GPIO_FN(HRTS0_D),
- GPIO_FN(TIOC1B_A), GPIO_FN(HIFD09),
- GPIO_FN(DU0_DG0), GPIO_FN(TX1_C), GPIO_FN(HSCK0_D),
- GPIO_FN(IECLK_A), GPIO_FN(TIOC1A_A), GPIO_FN(HIFD08),
- GPIO_FN(DU0_DR7), GPIO_FN(RX1_C), GPIO_FN(TIOC0D_A),
- GPIO_FN(HIFD07),
- GPIO_FN(DU0_DR6), GPIO_FN(SCK1_C), GPIO_FN(TIOC0C_A),
- GPIO_FN(HIFD06),
- GPIO_FN(DU0_DR5), GPIO_FN(RTS0_C), GPIO_FN(TIOC0B_A),
- GPIO_FN(HIFD05),
- GPIO_FN(DU0_DR4), GPIO_FN(CTS0_C), GPIO_FN(TIOC0A_A),
- GPIO_FN(HIFD04),
- GPIO_FN(DU0_DR3), GPIO_FN(TX0_B), GPIO_FN(TCLKD_A), GPIO_FN(HIFD03),
- GPIO_FN(DU0_DR2), GPIO_FN(RX0_B), GPIO_FN(TCLKC_A), GPIO_FN(HIFD02),
- GPIO_FN(DU0_DR1), GPIO_FN(SCK0_B), GPIO_FN(HTX0_D),
- GPIO_FN(IERX_A), GPIO_FN(TCLKB_A), GPIO_FN(HIFD01),
- GPIO_FN(DU0_DR0), GPIO_FN(SCIF_CLK_B), GPIO_FN(HRX0_D),
- GPIO_FN(IETX_A), GPIO_FN(TCLKA_A), GPIO_FN(HIFD00),
-
- /* IPSR7 */
- GPIO_FN(DU0_DB4), GPIO_FN(HIFINT),
- GPIO_FN(DU0_DB3), GPIO_FN(TX5_B), GPIO_FN(TIOC4D_A), GPIO_FN(HIFRD),
- GPIO_FN(DU0_DB2), GPIO_FN(RX5_B), GPIO_FN(RMII0_TXD1_B),
- GPIO_FN(TIOC4C_A), GPIO_FN(HIFWR),
- GPIO_FN(DU0_DB1), GPIO_FN(TX4_C), GPIO_FN(RMII0_TXD0_B),
- GPIO_FN(TIOC4B_A), GPIO_FN(HIFRS),
- GPIO_FN(DU0_DB0), GPIO_FN(RX4_C), GPIO_FN(RMII0_TXD_EN_B),
- GPIO_FN(TIOC4A_A), GPIO_FN(HIFCS),
- GPIO_FN(DU0_DG7), GPIO_FN(TX3_C), GPIO_FN(RMII0_RXD1_B),
- GPIO_FN(TIOC3D_A), GPIO_FN(HIFD15),
- GPIO_FN(DU0_DG6), GPIO_FN(RX3_C), GPIO_FN(RMII0_RXD0_B),
- GPIO_FN(TIOC3C_A), GPIO_FN(HIFD14),
- GPIO_FN(DU0_DG5), GPIO_FN(TX2_C), GPIO_FN(RMII0_RX_ER_B),
- GPIO_FN(TIOC3B_A), GPIO_FN(HIFD13),
- GPIO_FN(DU0_DG4), GPIO_FN(RX2_C), GPIO_FN(RMII0_CRS_DV_B),
- GPIO_FN(TIOC3A_A), GPIO_FN(HIFD12),
- GPIO_FN(DU0_DG3), GPIO_FN(SCK2_C), GPIO_FN(RMII0_MDIO_B),
- GPIO_FN(TIOC2B_A), GPIO_FN(HIFD11),
- GPIO_FN(DU0_DG2), GPIO_FN(RTS1_C), GPIO_FN(RMII0_MDC_B),
- GPIO_FN(TIOC2A_A), GPIO_FN(HIFD10),
-
- /* IPSR8 */
- GPIO_FN(IRQ3_A), GPIO_FN(RTS0_A), GPIO_FN(HRTS0_B),
- GPIO_FN(ET0_ERXD3_A),
- GPIO_FN(IRQ2_A), GPIO_FN(CTS0_A), GPIO_FN(HCTS0_B),
- GPIO_FN(ET0_ERXD2_A),
- GPIO_FN(IRQ1_A), GPIO_FN(HSPI_RX_B), GPIO_FN(TX3_E),
- GPIO_FN(ET0_ERXD1),
- GPIO_FN(IRQ0_A), GPIO_FN(HSPI_TX_B), GPIO_FN(RX3_E),
- GPIO_FN(ET0_ERXD0),
- GPIO_FN(DU0_CDE), GPIO_FN(HTX0_B), GPIO_FN(AUDIO_CLKB_B),
- GPIO_FN(LCD_VCPWC_B),
- GPIO_FN(DU0_DISP), GPIO_FN(CAN0_TX_B), GPIO_FN(HRX0_B),
- GPIO_FN(AUDIO_CLKA_B),
- GPIO_FN(DU0_EXODDF_DU0_ODDF), GPIO_FN(CAN0_RX_B), GPIO_FN(HSCK0_B),
- GPIO_FN(SSI_SDATA1_B),
- GPIO_FN(DU0_EXVSYNC_DU0_VSYNC), GPIO_FN(HSPI_RX0_C),
- GPIO_FN(SSI_WS1_B),
- GPIO_FN(DU0_EXHSYNC_DU0_HSYNC), GPIO_FN(HSPI_TX0_C),
- GPIO_FN(SSI_SCK1_B),
- GPIO_FN(DU0_DOTCLKOUT), GPIO_FN(HSPI_CLK0_C),
- GPIO_FN(SSI_SDATA0_B),
- GPIO_FN(DU0_DOTCLKIN), GPIO_FN(HSPI_CS0_C),
- GPIO_FN(SSI_WS0_B),
- GPIO_FN(DU0_DB7), GPIO_FN(SSI_SCK0_B), GPIO_FN(HIFEBL_B),
- GPIO_FN(DU0_DB6), GPIO_FN(HIFRDY),
- GPIO_FN(DU0_DB5), GPIO_FN(HIFDREQ),
-
- /* IPSR9 */
- GPIO_FN(SSI_SDATA1_A), GPIO_FN(VI1_3_B), GPIO_FN(LCD_DATA14_B),
- GPIO_FN(SSI_WS1_A), GPIO_FN(VI1_2_B), GPIO_FN(LCD_DATA13_B),
- GPIO_FN(SSI_SCK1_A), GPIO_FN(VI1_1_B), GPIO_FN(TIOC2B_B),
- GPIO_FN(LCD_DATA12_B),
- GPIO_FN(SSI_SDATA0_A), GPIO_FN(VI1_0_B), GPIO_FN(TIOC2A_B),
- GPIO_FN(LCD_DATA11_B),
- GPIO_FN(SSI_WS0_A), GPIO_FN(TIOC1B_B), GPIO_FN(LCD_DATA10_B),
- GPIO_FN(SSI_SCK0_A), GPIO_FN(TIOC1A_B), GPIO_FN(LCD_DATA9_B),
- GPIO_FN(VI1_7_A), GPIO_FN(FCE_B), GPIO_FN(LCD_DATA8_B),
- GPIO_FN(VI1_6_A), GPIO_FN(FD7_B), GPIO_FN(LCD_DATA7_B),
- GPIO_FN(VI1_5_A), GPIO_FN(FD6_B), GPIO_FN(LCD_DATA6_B),
- GPIO_FN(VI1_4_A), GPIO_FN(FD5_B), GPIO_FN(LCD_DATA5_B),
- GPIO_FN(VI1_3_A), GPIO_FN(FD4_B), GPIO_FN(LCD_DATA4_B),
- GPIO_FN(VI1_2_A), GPIO_FN(FD3_B), GPIO_FN(LCD_DATA3_B),
- GPIO_FN(VI1_1_A), GPIO_FN(FD2_B), GPIO_FN(LCD_DATA2_B),
- GPIO_FN(VI1_0_A), GPIO_FN(FD1_B), GPIO_FN(LCD_DATA1_B),
- GPIO_FN(VI1_CLK_A), GPIO_FN(FD0_B), GPIO_FN(LCD_DATA0_B),
-
- /* IPSR10 */
- GPIO_FN(CAN1_TX_A), GPIO_FN(TX5_C), GPIO_FN(MLB_DAT),
- GPIO_FN(CAN0_RX_A), GPIO_FN(IRQ0_B), GPIO_FN(MLB_SIG),
- GPIO_FN(CAN1_RX_A), GPIO_FN(IRQ1_B),
- GPIO_FN(CAN0_TX_A), GPIO_FN(TX4_D), GPIO_FN(MLB_CLK),
- GPIO_FN(CAN_CLK_A), GPIO_FN(RX4_D),
- GPIO_FN(AUDIO_CLKOUT), GPIO_FN(TX1_E), GPIO_FN(HRTS0_C),
- GPIO_FN(FSE_B), GPIO_FN(LCD_M_DISP_B),
- GPIO_FN(AUDIO_CLKC), GPIO_FN(SCK1_E), GPIO_FN(HCTS0_C),
- GPIO_FN(FRB_B), GPIO_FN(LCD_VEPWC_B),
- GPIO_FN(AUDIO_CLKB_A), GPIO_FN(LCD_CLK_B),
- GPIO_FN(AUDIO_CLKA_A), GPIO_FN(VI1_CLK_B), GPIO_FN(SCK1_D),
- GPIO_FN(IECLK_B), GPIO_FN(LCD_FLM_B),
- GPIO_FN(SSI_SDATA3), GPIO_FN(VI1_7_B), GPIO_FN(HTX0_C),
- GPIO_FN(FWE_B), GPIO_FN(LCD_CL2_B),
- GPIO_FN(SSI_SDATA2), GPIO_FN(VI1_6_B), GPIO_FN(HRX0_C),
- GPIO_FN(FRE_B), GPIO_FN(LCD_CL1_B),
- GPIO_FN(SSI_WS23), GPIO_FN(VI1_5_B), GPIO_FN(TX1_D),
- GPIO_FN(HSCK0_C), GPIO_FN(FALE_B), GPIO_FN(LCD_DON_B),
- GPIO_FN(SSI_SCK23), GPIO_FN(VI1_4_B), GPIO_FN(RX1_D),
- GPIO_FN(FCLE_B), GPIO_FN(LCD_DATA15_B),
-
- /* IPSR11 */
- GPIO_FN(PRESETOUT), GPIO_FN(ST_CLKOUT),
- GPIO_FN(DACK1), GPIO_FN(HSPI_CS_B), GPIO_FN(TX4_B),
- GPIO_FN(ET0_RX_CLK_A),
- GPIO_FN(DREQ1), GPIO_FN(HSPI_CLK_B), GPIO_FN(RX4_B),
- GPIO_FN(ET0_PHY_INT_C), GPIO_FN(ET0_TX_CLK_A),
- GPIO_FN(DACK0), GPIO_FN(SD1_DAT3_A), GPIO_FN(ET0_TX_ER),
- GPIO_FN(DREQ0), GPIO_FN(SD1_CLK_A), GPIO_FN(ET0_TX_EN),
- GPIO_FN(USB_OVC1), GPIO_FN(RX3_D), GPIO_FN(CAN1_RX_B),
- GPIO_FN(RX5_D), GPIO_FN(IERX_B),
- GPIO_FN(PENC1), GPIO_FN(TX3_D), GPIO_FN(CAN1_TX_B),
- GPIO_FN(TX5_D), GPIO_FN(IETX_B),
- GPIO_FN(TX0_A), GPIO_FN(HSPI_TX_A),
- GPIO_FN(RX0_A), GPIO_FN(HSPI_RX_A), GPIO_FN(RMII0_RXD0_A),
- GPIO_FN(ET0_ERXD6),
- GPIO_FN(SCK0_A), GPIO_FN(HSPI_CS_A), GPIO_FN(VI0_CLKENB),
- GPIO_FN(RMII0_TXD1_A), GPIO_FN(ET0_ERXD5),
- GPIO_FN(SCIF_CLK_A), GPIO_FN(HSPI_CLK_A), GPIO_FN(VI0_CLK),
- GPIO_FN(RMII0_TXD0_A), GPIO_FN(ET0_ERXD4),
- GPIO_FN(SDSELF), GPIO_FN(RTS1_E),
- GPIO_FN(SDA0), GPIO_FN(HIFEBL_A),
- GPIO_FN(SDA1), GPIO_FN(RX1_E),
- GPIO_FN(SCL1), GPIO_FN(SCIF_CLK_C),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("GPSR0", 0xFFFC0004, 32, 1, GROUP(
- GP_0_31_FN, FN_IP2_2_0,
- GP_0_30_FN, FN_IP1_31_29,
- GP_0_29_FN, FN_IP1_28_26,
- GP_0_28_FN, FN_IP1_25_23,
- GP_0_27_FN, FN_IP1_22_20,
- GP_0_26_FN, FN_IP1_19_18,
- GP_0_25_FN, FN_IP1_17_16,
- GP_0_24_FN, FN_IP0_5_4,
- GP_0_23_FN, FN_IP0_3_2,
- GP_0_22_FN, FN_IP0_1_0,
- GP_0_21_FN, FN_IP11_28,
- GP_0_20_FN, FN_IP1_7_6,
- GP_0_19_FN, FN_IP1_5_4,
- GP_0_18_FN, FN_IP1_3_2,
- GP_0_17_FN, FN_IP1_1_0,
- GP_0_16_FN, FN_IP0_31_30,
- GP_0_15_FN, FN_IP0_29_28,
- GP_0_14_FN, FN_IP0_27_26,
- GP_0_13_FN, FN_IP0_25_24,
- GP_0_12_FN, FN_IP0_23_22,
- GP_0_11_FN, FN_IP0_21_20,
- GP_0_10_FN, FN_IP0_19_18,
- GP_0_9_FN, FN_IP0_17_16,
- GP_0_8_FN, FN_IP0_15_14,
- GP_0_7_FN, FN_IP0_13_12,
- GP_0_6_FN, FN_IP0_11_10,
- GP_0_5_FN, FN_IP0_9_8,
- GP_0_4_FN, FN_IP0_7_6,
- GP_0_3_FN, FN_IP1_15_14,
- GP_0_2_FN, FN_IP1_13_12,
- GP_0_1_FN, FN_IP1_11_10,
- GP_0_0_FN, FN_IP1_9_8 ))
- },
- { PINMUX_CFG_REG("GPSR1", 0xFFFC0008, 32, 1, GROUP(
- GP_1_31_FN, FN_IP11_25_23,
- GP_1_30_FN, FN_IP2_13_11,
- GP_1_29_FN, FN_IP2_10_8,
- GP_1_28_FN, FN_IP2_7_5,
- GP_1_27_FN, FN_IP3_26_24,
- GP_1_26_FN, FN_IP3_23_21,
- GP_1_25_FN, FN_IP2_4_3,
- GP_1_24_FN, FN_WE1,
- GP_1_23_FN, FN_WE0,
- GP_1_22_FN, FN_IP3_19_18,
- GP_1_21_FN, FN_RD,
- GP_1_20_FN, FN_IP3_17_15,
- GP_1_19_FN, FN_IP3_14_12,
- GP_1_18_FN, FN_IP3_11_9,
- GP_1_17_FN, FN_IP3_8_6,
- GP_1_16_FN, FN_IP3_5_3,
- GP_1_15_FN, FN_EX_CS0,
- GP_1_14_FN, FN_IP3_2,
- GP_1_13_FN, FN_CS0,
- GP_1_12_FN, FN_BS,
- GP_1_11_FN, FN_CLKOUT,
- GP_1_10_FN, FN_IP3_1_0,
- GP_1_9_FN, FN_IP2_30_28,
- GP_1_8_FN, FN_IP2_27_25,
- GP_1_7_FN, FN_IP2_24_23,
- GP_1_6_FN, FN_IP2_22_20,
- GP_1_5_FN, FN_IP2_19_17,
- GP_1_4_FN, FN_IP2_16_14,
- GP_1_3_FN, FN_IP11_22_21,
- GP_1_2_FN, FN_IP11_20_19,
- GP_1_1_FN, FN_IP3_29_27,
- GP_1_0_FN, FN_IP3_20 ))
- },
- { PINMUX_CFG_REG("GPSR2", 0xFFFC000C, 32, 1, GROUP(
- GP_2_31_FN, FN_IP4_31_30,
- GP_2_30_FN, FN_IP5_2_0,
- GP_2_29_FN, FN_IP5_5_3,
- GP_2_28_FN, FN_IP5_8_6,
- GP_2_27_FN, FN_IP5_11_9,
- GP_2_26_FN, FN_IP5_14_12,
- GP_2_25_FN, FN_IP5_17_15,
- GP_2_24_FN, FN_IP5_20_18,
- GP_2_23_FN, FN_IP5_22_21,
- GP_2_22_FN, FN_IP5_24_23,
- GP_2_21_FN, FN_IP5_26_25,
- GP_2_20_FN, FN_IP4_29_28,
- GP_2_19_FN, FN_IP4_27_26,
- GP_2_18_FN, FN_IP4_25_24,
- GP_2_17_FN, FN_IP4_23_22,
- GP_2_16_FN, FN_IP4_21_20,
- GP_2_15_FN, FN_IP4_19_18,
- GP_2_14_FN, FN_IP4_17_15,
- GP_2_13_FN, FN_IP4_14_12,
- GP_2_12_FN, FN_IP4_11_9,
- GP_2_11_FN, FN_IP4_8_6,
- GP_2_10_FN, FN_IP4_5_3,
- GP_2_9_FN, FN_IP8_27_26,
- GP_2_8_FN, FN_IP11_12,
- GP_2_7_FN, FN_IP8_25_23,
- GP_2_6_FN, FN_IP8_22_20,
- GP_2_5_FN, FN_IP11_27_26,
- GP_2_4_FN, FN_IP8_29_28,
- GP_2_3_FN, FN_IP4_2_0,
- GP_2_2_FN, FN_IP11_11_10,
- GP_2_1_FN, FN_IP11_9_7,
- GP_2_0_FN, FN_IP11_6_4 ))
- },
- { PINMUX_CFG_REG("GPSR3", 0xFFFC0010, 32, 1, GROUP(
- GP_3_31_FN, FN_IP9_1_0,
- GP_3_30_FN, FN_IP8_19_18,
- GP_3_29_FN, FN_IP8_17_16,
- GP_3_28_FN, FN_IP8_15_14,
- GP_3_27_FN, FN_IP8_13_12,
- GP_3_26_FN, FN_IP8_11_10,
- GP_3_25_FN, FN_IP8_9_8,
- GP_3_24_FN, FN_IP8_7_6,
- GP_3_23_FN, FN_IP8_5_4,
- GP_3_22_FN, FN_IP8_3_2,
- GP_3_21_FN, FN_IP8_1_0,
- GP_3_20_FN, FN_IP7_30_29,
- GP_3_19_FN, FN_IP7_28_27,
- GP_3_18_FN, FN_IP7_26_24,
- GP_3_17_FN, FN_IP7_23_21,
- GP_3_16_FN, FN_IP7_20_18,
- GP_3_15_FN, FN_IP7_17_15,
- GP_3_14_FN, FN_IP7_14_12,
- GP_3_13_FN, FN_IP7_11_9,
- GP_3_12_FN, FN_IP7_8_6,
- GP_3_11_FN, FN_IP7_5_3,
- GP_3_10_FN, FN_IP7_2_0,
- GP_3_9_FN, FN_IP6_23_21,
- GP_3_8_FN, FN_IP6_20_18,
- GP_3_7_FN, FN_IP6_17_16,
- GP_3_6_FN, FN_IP6_15_14,
- GP_3_5_FN, FN_IP6_13_12,
- GP_3_4_FN, FN_IP6_11_10,
- GP_3_3_FN, FN_IP6_9_8,
- GP_3_2_FN, FN_IP6_7_6,
- GP_3_1_FN, FN_IP6_5_3,
- GP_3_0_FN, FN_IP6_2_0 ))
- },
-
- { PINMUX_CFG_REG("GPSR4", 0xFFFC0014, 32, 1, GROUP(
- GP_4_31_FN, FN_IP10_24_23,
- GP_4_30_FN, FN_IP10_22,
- GP_4_29_FN, FN_IP11_18_16,
- GP_4_28_FN, FN_USB_OVC0,
- GP_4_27_FN, FN_IP11_15_13,
- GP_4_26_FN, FN_PENC0,
- GP_4_25_FN, FN_IP11_2,
- GP_4_24_FN, FN_SCL0,
- GP_4_23_FN, FN_IP11_1,
- GP_4_22_FN, FN_IP11_0,
- GP_4_21_FN, FN_IP10_21_19,
- GP_4_20_FN, FN_IP10_18_16,
- GP_4_19_FN, FN_IP10_15,
- GP_4_18_FN, FN_IP10_14_12,
- GP_4_17_FN, FN_IP10_11_9,
- GP_4_16_FN, FN_IP10_8_6,
- GP_4_15_FN, FN_IP10_5_3,
- GP_4_14_FN, FN_IP10_2_0,
- GP_4_13_FN, FN_IP9_29_28,
- GP_4_12_FN, FN_IP9_27_26,
- GP_4_11_FN, FN_IP9_9_8,
- GP_4_10_FN, FN_IP9_7_6,
- GP_4_9_FN, FN_IP9_5_4,
- GP_4_8_FN, FN_IP9_3_2,
- GP_4_7_FN, FN_IP9_17_16,
- GP_4_6_FN, FN_IP9_15_14,
- GP_4_5_FN, FN_IP9_13_12,
- GP_4_4_FN, FN_IP9_11_10,
- GP_4_3_FN, FN_IP9_25_24,
- GP_4_2_FN, FN_IP9_23_22,
- GP_4_1_FN, FN_IP9_21_20,
- GP_4_0_FN, FN_IP9_19_18 ))
- },
- { PINMUX_CFG_REG_VAR("GPSR5", 0xFFFC0018, 32,
- GROUP(-20, 1, 1, -6, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_FN, FN_IP10_29_28,
- GP_5_10_FN, FN_IP10_27_26,
- /* GP5_9_4 RESERVED */
- GP_5_3_FN, FN_IRQ3_B,
- GP_5_2_FN, FN_IRQ2_B,
- GP_5_1_FN, FN_IP11_3,
- GP_5_0_FN, FN_IP10_25 ))
- },
-
- { PINMUX_CFG_REG_VAR("IPSR0", 0xFFFC001C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP0_31_30 [2] */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A,
- FN_TIOC3D_C,
- /* IP0_29_28 [2] */
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C, 0,
- /* IP0_27_26 [2] */
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C, 0,
- /* IP0_25_24 [2] */
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C, 0,
- /* IP0_23_22 [2] */
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- /* IP0_21_20 [2] */
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- /* IP0_19_18 [2] */
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- /* IP0_17_16 [2] */
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- /* IP0_15_14 [2] */
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- /* IP0_13_12 [2] */
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- /* IP0_11_10 [2] */
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- /* IP0_9_8 [2] */
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- /* IP0_7_6 [2] */
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- /* IP0_5_4 [2] */
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- /* IP0_3_2 [2] */
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- /* IP0_1_0 [2] */
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR1", 0xFFFC0020, 32,
- GROUP(3, 3, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP1_31_29 [3] */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6,
- FN_FD3_A, 0, 0, 0,
- /* IP1_28_26 [3] */
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5,
- FN_FD2_A, 0, 0, 0,
- /* IP1_25_23 [3] */
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4,
- FN_FD1_A, 0, 0, 0,
- /* IP1_22_20 [3] */
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3,
- FN_FD0_A, 0, 0, 0,
- /* IP1_19_18 [2] */
- FN_A25, FN_TX2_D, FN_ST1_D2, 0,
- /* IP1_17_16 [2] */
- FN_A24, FN_RX2_D, FN_ST1_D1, 0,
- /* IP1_15_14 [2] */
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A, 0,
- /* IP1_13_12 [2] */
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A, 0,
- /* IP1_11_10 [2] */
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A, 0,
- /* IP1_9_8 [2] */
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A, 0,
- /* IP1_7_6 [2] */
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- /* IP1_5_4 [2] */
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- /* IP1_3_2 [2] */
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- /* IP1_1_0 [2] */
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR2", 0xFFFC0024, 32,
- GROUP(-1, 3, 3, 2, 3, 3, 3, 3, 3, 3, 2, 3),
- GROUP(
- /* IP2_31 [1] RESERVED */
- /* IP2_30_28 [3] */
- FN_D14, FN_TX2_B, 0, FN_FSE_A,
- FN_ET0_TX_CLK_B, 0, 0, 0,
- /* IP2_27_25 [3] */
- FN_D13, FN_RX2_B, 0, FN_FRB_A,
- FN_ET0_ETXD6_B, 0, 0, 0,
- /* IP2_24_23 [2] */
- FN_D12, 0, FN_FWE_A, FN_ET0_ETXD5_B,
- /* IP2_22_20 [3] */
- FN_D11, FN_RSPI_MISO_A, 0, FN_QMI_QIO1_A,
- FN_FRE_A, FN_ET0_ETXD3_B, 0, 0,
- /* IP2_19_17 [3] */
- FN_D10, FN_RSPI_MOSI_A, 0, FN_QMO_QIO0_A,
- FN_FALE_A, FN_ET0_ETXD2_B, 0, 0,
- /* IP2_16_14 [3] */
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A,
- FN_FCLE_A, FN_ET0_ETXD1_B, 0, 0,
- /* IP2_13_11 [3] */
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A,
- FN_FCE_A, FN_ET0_GTX_CLK_B, 0, 0,
- /* IP2_10_8 [3] */
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A,
- FN_FD7_A, 0, 0, 0,
- /* IP2_7_5 [3] */
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A,
- FN_FD6_A, 0, 0, 0,
- /* IP2_4_3 [2] */
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- /* IP2_2_0 [3] */
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7,
- FN_FD4_A, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR3", 0xFFFC0028, 32,
- GROUP(-2, 3, 3, 3, 1, 2, 3, 3, 3, 3, 3, 1, 2),
- GROUP(
- /* IP3_31_30 [2] RESERVED */
- /* IP3_29_27 [3] */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A,
- FN_ET0_ETXD7, 0, 0, 0,
- /* IP3_26_24 [3] */
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A, 0, 0,
- /* IP3_23_21 [3] */
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A, 0, 0,
- /* IP3_20 [1] */
- FN_EX_WAIT0, FN_TCLK1_B,
- /* IP3_19_18 [2] */
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- /* IP3_17_15 [3] */
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B,
- FN_ET0_ETXD3_A, 0, 0, 0,
- /* IP3_14_12 [3] */
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B,
- FN_ET0_ETXD2_A, 0, 0, 0,
- /* IP3_11_9 [3] */
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B,
- FN_ET0_ETXD1_A, 0, 0, 0,
- /* IP3_8_6 [3] */
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B,
- FN_ET0_GTX_CLK_A, 0, 0, 0,
- /* IP3_5_3 [3] */
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B,
- FN_ET0_ETXD0, 0, 0, 0,
- /* IP3_2 [1] */
- FN_CS1_A26, FN_QIO3_B,
- /* IP3_1_0 [2] */
- FN_D15, FN_SCK2_B, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR4", 0xFFFC002C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP4_31_30 [2] */
- 0, FN_SCK2_A, FN_VI0_G3, 0,
- /* IP4_29_28 [2] */
- 0, FN_RTS1_B, FN_VI0_G2, 0,
- /* IP4_27_26 [2] */
- 0, FN_CTS1_B, FN_VI0_DATA7_VI0_G1, 0,
- /* IP4_25_24 [2] */
- 0, FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- /* IP4_23_22 [2] */
- 0, FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- /* IP4_21_20 [2] */
- 0, FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- /* IP4_19_18 [2] */
- 0, FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- /* IP4_17_15 [3] */
- 0, FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A,
- FN_ET0_MDC, 0, 0, 0,
- /* IP4_14_12 [3] */
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A,
- FN_ET0_COL, 0, 0, 0,
- /* IP4_11_9 [3] */
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A,
- FN_ET0_CRS, 0, 0, 0,
- /* IP4_8_6 [3] */
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A,
- FN_ET0_RX_ER, 0, 0, 0,
- /* IP4_5_3 [3] */
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A,
- FN_ET0_RX_DV, 0, 0, 0,
- /* IP4_2_0 [3] */
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A,
- FN_ET0_ERXD7, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR5", 0xFFFC0030, 32,
- GROUP(-5, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP5_31_27 [5] RESERVED */
- /* IP5_26_25 [2] */
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D, 0,
- /* IP5_24_23 [2] */
- FN_REF125CK, FN_ADTRG, FN_RX5_C, 0,
- /* IP5_22_21 [2] */
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5, 0,
- /* IP5_20_18 [3] */
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, 0,
- 0, 0, 0, FN_ET0_PHY_INT_B,
- /* IP5_17_15 [3] */
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, 0,
- 0, 0, 0, FN_ET0_MAGIC_B,
- /* IP5_14_12 [3] */
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, 0,
- 0, 0, 0, FN_ET0_LINK_B,
- /* IP5_11_9 [3] */
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, 0,
- 0, 0, 0, FN_ET0_MDIO_B,
- /* IP5_8_6 [3] */
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, 0,
- 0, 0, 0, FN_ET0_ERXD3_B,
- /* IP5_5_3 [3] */
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, 0,
- 0, 0, 0, FN_ET0_ERXD2_B,
- /* IP5_2_0 [3] */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, 0,
- FN_ET0_RX_CLK_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR6", 0xFFFC0034, 32,
- GROUP(-8, 3, 3, 2, 2, 2, 2, 2, 2, 3, 3),
- GROUP(
- /* IP5_31_24 [8] RESERVED */
- /* IP6_23_21 [3] */
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A,
- FN_HIFD09, 0, 0, 0,
- /* IP6_20_18 [3] */
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A,
- FN_TIOC1A_A, FN_HIFD08, 0, 0,
- /* IP6_17_16 [2] */
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- /* IP6_15_14 [2] */
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- /* IP6_13_12 [2] */
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- /* IP6_11_10 [2] */
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- /* IP6_9_8 [2] */
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- /* IP6_7_6 [2] */
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- /* IP6_5_3 [3] */
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A,
- FN_TCLKB_A, FN_HIFD01, 0, 0,
- /* IP6_2_0 [3] */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A,
- FN_TCLKA_A, FN_HIFD00, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR7", 0xFFFC0038, 32,
- GROUP(-1, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP7_31 [1] RESERVED */
- /* IP7_30_29 [2] */
- FN_DU0_DB4, 0, FN_HIFINT, 0,
- /* IP7_28_27 [2] */
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- /* IP7_26_24 [3] */
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A,
- FN_HIFWR, 0, 0, 0,
- /* IP7_23_21 [3] */
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A,
- FN_HIFRS, 0, 0, 0,
- /* IP7_20_18 [3] */
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A,
- FN_HIFCS, 0, 0, 0,
- /* IP7_17_15 [3] */
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A,
- FN_HIFD15, 0, 0, 0,
- /* IP7_14_12 [3] */
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A,
- FN_HIFD14, 0, 0, 0,
- /* IP7_11_9 [3] */
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A,
- FN_HIFD13, 0, 0, 0,
- /* IP7_8_6 [3] */
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A,
- FN_HIFD12, 0, 0, 0,
- /* IP7_5_3 [3] */
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A,
- FN_HIFD11, 0, 0, 0,
- /* IP7_2_0 [3] */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A,
- FN_HIFD10, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR8", 0xFFFC003C, 32,
- GROUP(-2, 2, 2, 3, 3, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP8_29_28 [2] */
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
- /* IP8_27_26 [2] */
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- /* IP8_25_23 [3] */
- FN_IRQ1_A, 0, FN_HSPI_RX_B, FN_TX3_E,
- FN_ET0_ERXD1, 0, 0, 0,
- /* IP8_22_20 [3] */
- FN_IRQ0_A, 0, FN_HSPI_TX_B, FN_RX3_E,
- FN_ET0_ERXD0, 0, 0, 0,
- /* IP8_19_18 [2] */
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- /* IP8_17_16 [2] */
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- /* IP8_15_14 [2] */
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B,
- FN_SSI_SDATA1_B,
- /* IP8_13_12 [2] */
- FN_DU0_EXVSYNC_DU0_VSYNC, 0, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- /* IP8_11_10 [2] */
- FN_DU0_EXHSYNC_DU0_HSYNC, 0, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- /* IP8_9_8 [2] */
- FN_DU0_DOTCLKOUT, 0, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- /* IP8_7_6 [2] */
- FN_DU0_DOTCLKIN, 0, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- /* IP8_5_4 [2] */
- FN_DU0_DB7, 0, FN_SSI_SCK0_B, FN_HIFEBL_B,
- /* IP8_3_2 [2] */
- FN_DU0_DB6, 0, FN_HIFRDY, 0,
- /* IP8_1_0 [2] */
- FN_DU0_DB5, 0, FN_HIFDREQ, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR9", 0xFFFC0040, 32,
- GROUP(-2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP9_29_28 [2] */
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B, 0,
- /* IP9_27_26 [2] */
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B, 0,
- /* IP9_25_24 [2] */
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- /* IP9_23_22 [2] */
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- /* IP9_21_20 [2] */
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B, 0,
- /* IP9_19_18 [2] */
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B, 0,
- /* IP9_17_16 [2] */
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B, 0,
- /* IP9_15_14 [2] */
- FN_VI1_6_A, 0, FN_FD7_B, FN_LCD_DATA7_B,
- /* IP9_13_12 [2] */
- FN_VI1_5_A, 0, FN_FD6_B, FN_LCD_DATA6_B,
- /* IP9_11_10 [2] */
- FN_VI1_4_A, 0, FN_FD5_B, FN_LCD_DATA5_B,
- /* IP9_9_8 [2] */
- FN_VI1_3_A, 0, FN_FD4_B, FN_LCD_DATA4_B,
- /* IP9_7_6 [2] */
- FN_VI1_2_A, 0, FN_FD3_B, FN_LCD_DATA3_B,
- /* IP9_5_4 [2] */
- FN_VI1_1_A, 0, FN_FD2_B, FN_LCD_DATA2_B,
- /* IP9_3_2 [2] */
- FN_VI1_0_A, 0, FN_FD1_B, FN_LCD_DATA1_B,
- /* IP9_1_0 [2] */
- FN_VI1_CLK_A, 0, FN_FD0_B, FN_LCD_DATA0_B ))
- },
- { PINMUX_CFG_REG_VAR("IPSR10", 0xFFFC0044, 32,
- GROUP(-2, 2, 2, 1, 2, 1, 3, 3, 1, 3, 3, 3, 3, 3),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP10_29_28 [2] */
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT, 0,
- /* IP10_27_26 [2] */
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG, 0,
- /* IP10_25 [1] */
- FN_CAN1_RX_A, FN_IRQ1_B,
- /* IP10_24_23 [2] */
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK, 0,
- /* IP10_22 [1] */
- FN_CAN_CLK_A, FN_RX4_D,
- /* IP10_21_19 [3] */
- FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,
- FN_LCD_M_DISP_B, 0, 0,
- /* IP10_18_16 [3] */
- FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
- FN_LCD_VEPWC_B, 0, 0,
- /* IP10_15 [1] */
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- /* IP10_14_12 [3] */
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
- FN_LCD_FLM_B, 0, 0, 0,
- /* IP10_11_9 [3] */
- FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
- FN_LCD_CL2_B, 0, 0,
- /* IP10_8_6 [3] */
- FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
- FN_LCD_CL1_B, 0, 0,
- /* IP10_5_3 [3] */
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
- FN_LCD_DON_B, 0, 0,
- /* IP10_2_0 [3] */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B,
- FN_LCD_DATA15_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR11", 0xFFFC0048, 32,
- GROUP(-3, 1, 2, 3, 2, 2, 3, 3, 1, 2, 3, 3,
- 1, 1, 1, 1),
- GROUP(
- /* IP11_31_29 [3] RESERVED */
- /* IP11_28 [1] */
- FN_PRESETOUT, FN_ST_CLKOUT,
- /* IP11_27_26 [2] */
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- /* IP11_25_23 [3] */
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C,
- FN_ET0_TX_CLK_A, 0, 0, 0,
- /* IP11_22_21 [2] */
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER, 0,
- /* IP11_20_19 [2] */
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN, 0,
- /* IP11_18_16 [3] */
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D,
- FN_IERX_B, 0, 0, 0,
- /* IP11_15_13 [3] */
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D,
- FN_IETX_B, 0, 0, 0,
- /* IP11_12 [1] */
- FN_TX0_A, FN_HSPI_TX_A,
- /* IP11_11_10 [2] */
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- /* IP11_9_7 [3] */
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A,
- FN_ET0_ERXD5, 0, 0, 0,
- /* IP11_6_4 [3] */
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A,
- FN_ET0_ERXD4, 0, 0, 0,
- /* IP11_3 [1] */
- FN_SDSELF, FN_RTS1_E,
- /* IP11_2 [1] */
- FN_SDA0, FN_HIFEBL_A,
- /* IP11_1 [1] */
- FN_SDA1, FN_RX1_E,
- /* IP11_0 [1] */
- FN_SCL1, FN_SCIF_CLK_C ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL1", 0xFFFC004C, 32,
- GROUP(-3, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 2,
- 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* SEL1_31_29 [3] RESERVED */
- /* SEL1_28 [1] */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- /* SEL1_27 [1] */
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- /* SEL1_26 [1] */
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- /* SEL1_25 [1] */
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- /* SEL1_24 [1] */
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- /* SEL1_23 [1] */
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- /* SEL1_22_21 [2] */
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2, 0,
- /* SEL1_20 [1] */
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- /* SEL1_19 [1] */
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- /* SEL1_18 [1] */
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- /* SEL1_17_16 [2] */
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2, 0,
- /* SEL1_15_14 [2] */
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- /* SEL1_13 [1] */
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- /* SEL1_12_11 [2] */
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2, 0,
- /* SEL1_10 [1] */
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- /* SEL1_9 [1] */
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- /* SEL1_8 [1] */
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- /* SEL1_7 [1] */
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- /* SEL1_6 [1] */
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- /* SEL1_5 [1] */
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- /* SEL1_4 [1] */
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- /* SEL1_3 [1] */
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- /* SEL1_2 [1] */
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- /* SEL1_1 [1] */
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- /* SEL1_0 [1] */
- FN_SEL_INTC_0, FN_SEL_INTC_1 ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xFFFC0050, 32,
- GROUP(-8, 1, 1, 1, 2, 2, 1, 2, 2, 3, 2, 3, 2, 2),
- GROUP(
- /* SEL2_31_24 [8] RESERVED */
- /* SEL2_23 [1] */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- /* SEL2_22 [1] */
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- /* SEL2_21 [1] */
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- /* SEL2_20_19 [2] */
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2, 0,
- /* SEL2_18_17 [2] */
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2, 0,
- /* SEL2_16 [1] */
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- /* SEL2_15_14 [2] */
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- /* SEL2_13_12 [2] */
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- /* SEL2_11_9 [3] */
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
- FN_SEL_SCIF3_4, 0, 0, 0,
- /* SEL2_8_7 [2] */
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
- /* SEL2_6_4 [3] */
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
- FN_SEL_SCIF1_4, 0, 0, 0,
- /* SEL2_3_2 [2] */
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, 0,
- /* SEL2_1_0 [2] */
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2, 0 ))
- },
- /* GPIO 0 - 5*/
- { PINMUX_CFG_REG("INOUTSEL0", 0xFFC40004, 32, 1, GROUP(GP_INOUTSEL(0)))
- },
- { PINMUX_CFG_REG("INOUTSEL1", 0xFFC41004, 32, 1, GROUP(GP_INOUTSEL(1)))
- },
- { PINMUX_CFG_REG("INOUTSEL2", 0xFFC42004, 32, 1, GROUP(GP_INOUTSEL(2)))
- },
- { PINMUX_CFG_REG("INOUTSEL3", 0xFFC43004, 32, 1, GROUP(GP_INOUTSEL(3)))
- },
- { PINMUX_CFG_REG("INOUTSEL4", 0xFFC44004, 32, 1, GROUP(GP_INOUTSEL(4)))
- },
- { PINMUX_CFG_REG_VAR("INOUTSEL5", 0xffc45004, 32,
- GROUP(-20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_IN, GP_5_11_OUT,
- GP_5_10_IN, GP_5_10_OUT,
- GP_5_9_IN, GP_5_9_OUT,
- GP_5_8_IN, GP_5_8_OUT,
- GP_5_7_IN, GP_5_7_OUT,
- GP_5_6_IN, GP_5_6_OUT,
- GP_5_5_IN, GP_5_5_OUT,
- GP_5_4_IN, GP_5_4_OUT,
- GP_5_3_IN, GP_5_3_OUT,
- GP_5_2_IN, GP_5_2_OUT,
- GP_5_1_IN, GP_5_1_OUT,
- GP_5_0_IN, GP_5_0_OUT ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- /* GPIO 0 - 5*/
- { PINMUX_DATA_REG("INDT0", 0xFFC4000C, 32, GROUP(GP_INDT(0))) },
- { PINMUX_DATA_REG("INDT1", 0xFFC4100C, 32, GROUP(GP_INDT(1))) },
- { PINMUX_DATA_REG("INDT2", 0xFFC4200C, 32, GROUP(GP_INDT(2))) },
- { PINMUX_DATA_REG("INDT3", 0xFFC4300C, 32, GROUP(GP_INDT(3))) },
- { PINMUX_DATA_REG("INDT4", 0xFFC4400C, 32, GROUP(GP_INDT(4))) },
- { PINMUX_DATA_REG("INDT5", 0xFFC4500C, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0,
- GP_5_11_DATA, GP_5_10_DATA, GP_5_9_DATA, GP_5_8_DATA,
- GP_5_7_DATA, GP_5_6_DATA, GP_5_5_DATA, GP_5_4_DATA,
- GP_5_3_DATA, GP_5_2_DATA, GP_5_1_DATA, GP_5_0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7734_pinmux_info = {
- .name = "sh7734_pfc",
-
- .unlock_reg = 0xFFFC0000,
-
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7757.c b/drivers/pinctrl/renesas/pfc-sh7757.c
deleted file mode 100644
index 0d7857d7efefb4..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7757.c
+++ /dev/null
@@ -1,2219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7757.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA,
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG7_IN, PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTI7_IN, PTI6_IN, PTI5_IN, PTI4_IN,
- PTI3_IN, PTI2_IN, PTI1_IN, PTI0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTO7_IN, PTO6_IN, PTO5_IN, PTO4_IN,
- PTO3_IN, PTO2_IN, PTO1_IN, PTO0_IN,
- PTP7_IN, PTP6_IN, PTP5_IN, PTP4_IN,
- PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG7_OUT, PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTI7_OUT, PTI6_OUT, PTI5_OUT, PTI4_OUT,
- PTI3_OUT, PTI2_OUT, PTI1_OUT, PTI0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTO7_OUT, PTO6_OUT, PTO5_OUT, PTO4_OUT,
- PTO3_OUT, PTO2_OUT, PTO1_OUT, PTO0_OUT,
- PTP7_OUT, PTP6_OUT, PTP5_OUT, PTP4_OUT,
- PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG7_FN, PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTI7_FN, PTI6_FN, PTI5_FN, PTI4_FN,
- PTI3_FN, PTI2_FN, PTI1_FN, PTI0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTO7_FN, PTO6_FN, PTO5_FN, PTO4_FN,
- PTO3_FN, PTO2_FN, PTO1_FN, PTO0_FN,
- PTP7_FN, PTP6_FN, PTP5_FN, PTP4_FN,
- PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
-
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- PS1_2_FN1, PS1_2_FN2,
-
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- PS2_2_FN1, PS2_2_FN2,
-
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
-
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2,
-
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
-
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2,
-
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- PS7_4_FN1, PS7_4_FN2,
-
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* PTA (mobule: LBSC, RGMII) */
- BS_MARK, RDWR_MARK, WE1_MARK, RDY_MARK,
- ET0_MDC_MARK, ET0_MDIO_MARK, ET1_MDC_MARK, ET1_MDIO_MARK,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- IRQ15_MARK, IRQ14_MARK, IRQ13_MARK, IRQ12_MARK,
- IRQ11_MARK, IRQ10_MARK, IRQ9_MARK, IRQ8_MARK,
- ON_NRE_MARK, ON_NWE_MARK, ON_NWP_MARK, ON_NCE0_MARK,
- ON_R_B0_MARK, ON_ALE_MARK, ON_CLE_MARK, TCLK_MARK,
-
- /* PTC (mobule: IRQ, PWMU) */
- IRQ7_MARK, IRQ6_MARK, IRQ5_MARK, IRQ4_MARK,
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
- PWMU0_MARK, PWMU1_MARK, PWMU2_MARK, PWMU3_MARK,
- PWMU4_MARK, PWMU5_MARK,
-
- /* PTD (mobule: SPI0, DMAC) */
- SP0_MOSI_MARK, SP0_MISO_MARK, SP0_SCK_MARK, SP0_SCK_FB_MARK,
- SP0_SS0_MARK, SP0_SS1_MARK, SP0_SS2_MARK, SP0_SS3_MARK,
- DREQ0_MARK, DACK0_MARK, TEND0_MARK,
-
- /* PTE (mobule: RMII) */
- RMII0_CRS_DV_MARK, RMII0_TXD1_MARK,
- RMII0_TXD0_MARK, RMII0_TXEN_MARK,
- RMII0_REFCLK_MARK, RMII0_RXD1_MARK,
- RMII0_RXD0_MARK, RMII0_RX_ER_MARK,
-
- /* PTF (mobule: RMII, SerMux) */
- RMII1_CRS_DV_MARK, RMII1_TXD1_MARK,
- RMII1_TXD0_MARK, RMII1_TXEN_MARK,
- RMII1_REFCLK_MARK, RMII1_RXD1_MARK,
- RMII1_RXD0_MARK, RMII1_RX_ER_MARK,
- RAC_RI_MARK,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- BOOTFMS_MARK, BOOTWP_MARK, A25_MARK, A24_MARK,
- SERIRQ_MARK, WDTOVF_MARK, LPCPD_MARK, LDRQ_MARK,
- MMCCLK_MARK, MMCCMD_MARK,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- SP1_MOSI_MARK, SP1_MISO_MARK, SP1_SCK_MARK, SP1_SCK_FB_MARK,
- SP1_SS0_MARK, SP1_SS1_MARK, WP_MARK, FMS0_MARK,
- TEND1_MARK, DREQ1_MARK, DACK1_MARK, ADTRG1_MARK,
- ADTRG0_MARK,
-
- /* PTI (mobule: LBSC, SDHI) */
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- SD_WP_MARK, SD_CD_MARK, SD_CLK_MARK, SD_CMD_MARK,
- SD_D3_MARK, SD_D2_MARK, SD_D1_MARK, SD_D0_MARK,
-
- /* PTJ (mobule: SCIF234) */
- RTS3_MARK, CTS3_MARK, TXD3_MARK, RXD3_MARK,
- RTS4_MARK, RXD4_MARK, TXD4_MARK,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- COM2_TXD_MARK, COM2_RXD_MARK, COM2_RTS_MARK, COM2_CTS_MARK,
- COM2_DTR_MARK, COM2_DSR_MARK, COM2_DCD_MARK, CLKOUT_MARK,
- SCK2_MARK, SCK4_MARK, SCK3_MARK,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- RAC_RXD_MARK, RAC_RTS_MARK, RAC_CTS_MARK, RAC_DTR_MARK,
- RAC_DSR_MARK, RAC_DCD_MARK, RAC_TXD_MARK, RXD2_MARK,
- CS5_MARK, CS6_MARK, AUDSYNC_MARK, AUDCK_MARK,
- TXD2_MARK,
-
- /* PTM (mobule: LBSC, IIC) */
- CS4_MARK, RD_MARK, WE0_MARK, CS0_MARK,
- SDA6_MARK, SCL6_MARK, SDA7_MARK, SCL7_MARK,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- VBUS_EN_MARK, VBUS_OC_MARK, JMCTCK_MARK, JMCTMS_MARK,
- JMCTDO_MARK, JMCTDI_MARK, JMCTRST_MARK,
- SGPIO1_CLK_MARK, SGPIO1_LOAD_MARK, SGPIO1_DI_MARK,
- SGPIO1_DO_MARK, SUB_CLKIN_MARK,
-
- /* PTO (mobule: SGPIO, SerMux) */
- SGPIO0_CLK_MARK, SGPIO0_LOAD_MARK, SGPIO0_DI_MARK,
- SGPIO0_DO_MARK, SGPIO2_CLK_MARK, SGPIO2_LOAD_MARK,
- SGPIO2_DI_MARK, SGPIO2_DO_MARK,
- COM1_TXD_MARK, COM1_RXD_MARK, COM1_RTS_MARK, COM1_CTS_MARK,
-
- /* PTQ (mobule: LPC) */
- LAD3_MARK, LAD2_MARK, LAD1_MARK, LAD0_MARK,
- LFRAME_MARK, LRESET_MARK, LCLK_MARK,
-
- /* PTR (mobule: GRA, IIC) */
- DDC3_MARK, DDC2_MARK, SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK, SDA0_MARK, SCL0_MARK,
- SDA8_MARK, SCL8_MARK,
-
- /* PTS (mobule: GRA, IIC) */
- DDC1_MARK, DDC0_MARK, SDA5_MARK, SCL5_MARK,
- SDA4_MARK, SCL4_MARK, SDA3_MARK, SCL3_MARK,
- SDA9_MARK, SCL9_MARK,
-
- /* PTT (mobule: PWMX, AUD) */
- PWMX7_MARK, PWMX6_MARK, PWMX5_MARK, PWMX4_MARK,
- PWMX3_MARK, PWMX2_MARK, PWMX1_MARK, PWMX0_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- /* PTU (mobule: LPC, APM) */
- LGPIO7_MARK, LGPIO6_MARK, LGPIO5_MARK, LGPIO4_MARK,
- LGPIO3_MARK, LGPIO2_MARK, LGPIO1_MARK, LGPIO0_MARK,
- APMONCTL_O_MARK, APMPWBTOUT_O_MARK, APMSCI_O_MARK,
- APMVDDON_MARK, APMSLPBTN_MARK, APMPWRBTN_MARK, APMS5N_MARK,
- APMS3N_MARK,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- COM2_RI_MARK, R_SPI_MOSI_MARK, R_SPI_MISO_MARK,
- R_SPI_RSPCK_MARK, R_SPI_SSL0_MARK, R_SPI_SSL1_MARK,
- EVENT7_MARK, EVENT6_MARK, VBIOS_DI_MARK, VBIOS_DO_MARK,
- VBIOS_CLK_MARK, VBIOS_CS_MARK,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- EVENT5_MARK, EVENT4_MARK, EVENT3_MARK, EVENT2_MARK,
- EVENT1_MARK, EVENT0_MARK, CTS4_MARK, CTS2_MARK,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- RTS2_MARK, SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
-
- /* PTY (mobule: LBSC) */
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
-
- /* PTZ (mobule: eMMC, ONFI) */
- MMCDAT7_MARK, MMCDAT6_MARK, MMCDAT5_MARK, MMCDAT4_MARK,
- MMCDAT3_MARK, MMCDAT2_MARK, MMCDAT1_MARK, MMCDAT0_MARK,
- ON_DQ7_MARK, ON_DQ6_MARK, ON_DQ5_MARK, ON_DQ4_MARK,
- ON_DQ3_MARK, ON_DQ2_MARK, ON_DQ1_MARK, ON_DQ0_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG7_DATA, PTG7_IN, PTG7_OUT),
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTI GPIO */
- PINMUX_DATA(PTI7_DATA, PTI7_IN, PTI7_OUT),
- PINMUX_DATA(PTI6_DATA, PTI6_IN, PTI6_OUT),
- PINMUX_DATA(PTI5_DATA, PTI5_IN, PTI5_OUT),
- PINMUX_DATA(PTI4_DATA, PTI4_IN, PTI4_OUT),
- PINMUX_DATA(PTI3_DATA, PTI3_IN, PTI3_OUT),
- PINMUX_DATA(PTI2_DATA, PTI2_IN, PTI2_OUT),
- PINMUX_DATA(PTI1_DATA, PTI1_IN, PTI1_OUT),
- PINMUX_DATA(PTI0_DATA, PTI0_IN, PTI0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTO GPIO */
- PINMUX_DATA(PTO7_DATA, PTO7_IN, PTO7_OUT),
- PINMUX_DATA(PTO6_DATA, PTO6_IN, PTO6_OUT),
- PINMUX_DATA(PTO5_DATA, PTO5_IN, PTO5_OUT),
- PINMUX_DATA(PTO4_DATA, PTO4_IN, PTO4_OUT),
- PINMUX_DATA(PTO3_DATA, PTO3_IN, PTO3_OUT),
- PINMUX_DATA(PTO2_DATA, PTO2_IN, PTO2_OUT),
- PINMUX_DATA(PTO1_DATA, PTO1_IN, PTO1_OUT),
- PINMUX_DATA(PTO0_DATA, PTO0_IN, PTO0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(BS_MARK, PTA7_FN),
- PINMUX_DATA(RDWR_MARK, PTA6_FN),
- PINMUX_DATA(WE1_MARK, PTA5_FN),
- PINMUX_DATA(RDY_MARK, PTA4_FN),
- PINMUX_DATA(ET0_MDC_MARK, PTA3_FN),
- PINMUX_DATA(ET0_MDIO_MARK, PTA2_FN),
- PINMUX_DATA(ET1_MDC_MARK, PTA1_FN),
- PINMUX_DATA(ET1_MDIO_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(IRQ15_MARK, PS0_15_FN1, PTB7_FN),
- PINMUX_DATA(ON_NRE_MARK, PS0_15_FN2, PTB7_FN),
- PINMUX_DATA(IRQ14_MARK, PS0_14_FN1, PTB6_FN),
- PINMUX_DATA(ON_NWE_MARK, PS0_14_FN2, PTB6_FN),
- PINMUX_DATA(IRQ13_MARK, PS0_13_FN1, PTB5_FN),
- PINMUX_DATA(ON_NWP_MARK, PS0_13_FN2, PTB5_FN),
- PINMUX_DATA(IRQ12_MARK, PS0_12_FN1, PTB4_FN),
- PINMUX_DATA(ON_NCE0_MARK, PS0_12_FN2, PTB4_FN),
- PINMUX_DATA(IRQ11_MARK, PS0_11_FN1, PTB3_FN),
- PINMUX_DATA(ON_R_B0_MARK, PS0_11_FN2, PTB3_FN),
- PINMUX_DATA(IRQ10_MARK, PS0_10_FN1, PTB2_FN),
- PINMUX_DATA(ON_ALE_MARK, PS0_10_FN2, PTB2_FN),
- PINMUX_DATA(IRQ9_MARK, PS0_9_FN1, PTB1_FN),
- PINMUX_DATA(ON_CLE_MARK, PS0_9_FN2, PTB1_FN),
- PINMUX_DATA(IRQ8_MARK, PS0_8_FN1, PTB0_FN),
- PINMUX_DATA(TCLK_MARK, PS0_8_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IRQ7_MARK, PS0_7_FN1, PTC7_FN),
- PINMUX_DATA(PWMU0_MARK, PS0_7_FN2, PTC7_FN),
- PINMUX_DATA(IRQ6_MARK, PS0_6_FN1, PTC6_FN),
- PINMUX_DATA(PWMU1_MARK, PS0_6_FN2, PTC6_FN),
- PINMUX_DATA(IRQ5_MARK, PS0_5_FN1, PTC5_FN),
- PINMUX_DATA(PWMU2_MARK, PS0_5_FN2, PTC5_FN),
- PINMUX_DATA(IRQ4_MARK, PS0_4_FN1, PTC5_FN),
- PINMUX_DATA(PWMU3_MARK, PS0_4_FN2, PTC4_FN),
- PINMUX_DATA(IRQ3_MARK, PS0_3_FN1, PTC3_FN),
- PINMUX_DATA(PWMU4_MARK, PS0_3_FN2, PTC3_FN),
- PINMUX_DATA(IRQ2_MARK, PS0_2_FN1, PTC2_FN),
- PINMUX_DATA(PWMU5_MARK, PS0_2_FN2, PTC2_FN),
- PINMUX_DATA(IRQ1_MARK, PTC1_FN),
- PINMUX_DATA(IRQ0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(SP0_MOSI_MARK, PTD7_FN),
- PINMUX_DATA(SP0_MISO_MARK, PTD6_FN),
- PINMUX_DATA(SP0_SCK_MARK, PTD5_FN),
- PINMUX_DATA(SP0_SCK_FB_MARK, PTD4_FN),
- PINMUX_DATA(SP0_SS0_MARK, PTD3_FN),
- PINMUX_DATA(SP0_SS1_MARK, PS1_10_FN1, PTD2_FN),
- PINMUX_DATA(DREQ0_MARK, PS1_10_FN2, PTD2_FN),
- PINMUX_DATA(SP0_SS2_MARK, PS1_9_FN1, PTD1_FN),
- PINMUX_DATA(DACK0_MARK, PS1_9_FN2, PTD1_FN),
- PINMUX_DATA(SP0_SS3_MARK, PS1_8_FN1, PTD0_FN),
- PINMUX_DATA(TEND0_MARK, PS1_8_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(RMII0_CRS_DV_MARK, PTE7_FN),
- PINMUX_DATA(RMII0_TXD1_MARK, PTE6_FN),
- PINMUX_DATA(RMII0_TXD0_MARK, PTE5_FN),
- PINMUX_DATA(RMII0_TXEN_MARK, PTE4_FN),
- PINMUX_DATA(RMII0_REFCLK_MARK, PTE3_FN),
- PINMUX_DATA(RMII0_RXD1_MARK, PTE2_FN),
- PINMUX_DATA(RMII0_RXD0_MARK, PTE1_FN),
- PINMUX_DATA(RMII0_RX_ER_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(RMII1_CRS_DV_MARK, PTF7_FN),
- PINMUX_DATA(RMII1_TXD1_MARK, PTF6_FN),
- PINMUX_DATA(RMII1_TXD0_MARK, PTF5_FN),
- PINMUX_DATA(RMII1_TXEN_MARK, PTF4_FN),
- PINMUX_DATA(RMII1_REFCLK_MARK, PTF3_FN),
- PINMUX_DATA(RMII1_RXD1_MARK, PS1_2_FN1, PTF2_FN),
- PINMUX_DATA(RAC_RI_MARK, PS1_2_FN2, PTF2_FN),
- PINMUX_DATA(RMII1_RXD0_MARK, PTF1_FN),
- PINMUX_DATA(RMII1_RX_ER_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(BOOTFMS_MARK, PTG7_FN),
- PINMUX_DATA(BOOTWP_MARK, PTG6_FN),
- PINMUX_DATA(A25_MARK, PS2_13_FN1, PTG5_FN),
- PINMUX_DATA(MMCCLK_MARK, PS2_13_FN2, PTG5_FN),
- PINMUX_DATA(A24_MARK, PS2_12_FN1, PTG4_FN),
- PINMUX_DATA(MMCCMD_MARK, PS2_12_FN2, PTG4_FN),
- PINMUX_DATA(SERIRQ_MARK, PTG3_FN),
- PINMUX_DATA(WDTOVF_MARK, PTG2_FN),
- PINMUX_DATA(LPCPD_MARK, PTG1_FN),
- PINMUX_DATA(LDRQ_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(SP1_MOSI_MARK, PS2_7_FN1, PTH7_FN),
- PINMUX_DATA(TEND1_MARK, PS2_7_FN2, PTH7_FN),
- PINMUX_DATA(SP1_MISO_MARK, PS2_6_FN1, PTH6_FN),
- PINMUX_DATA(DREQ1_MARK, PS2_6_FN2, PTH6_FN),
- PINMUX_DATA(SP1_SCK_MARK, PS2_5_FN1, PTH5_FN),
- PINMUX_DATA(DACK1_MARK, PS2_5_FN2, PTH5_FN),
- PINMUX_DATA(SP1_SCK_FB_MARK, PS2_4_FN1, PTH4_FN),
- PINMUX_DATA(ADTRG1_MARK, PS2_4_FN2, PTH4_FN),
- PINMUX_DATA(SP1_SS0_MARK, PTH3_FN),
- PINMUX_DATA(SP1_SS1_MARK, PS2_2_FN1, PTH2_FN),
- PINMUX_DATA(ADTRG0_MARK, PS2_2_FN2, PTH2_FN),
- PINMUX_DATA(WP_MARK, PTH1_FN),
- PINMUX_DATA(FMS0_MARK, PTH0_FN),
-
- /* PTI FN */
- PINMUX_DATA(D15_MARK, PS3_15_FN1, PTI7_FN),
- PINMUX_DATA(SD_WP_MARK, PS3_15_FN2, PTI7_FN),
- PINMUX_DATA(D14_MARK, PS3_14_FN1, PTI6_FN),
- PINMUX_DATA(SD_CD_MARK, PS3_14_FN2, PTI6_FN),
- PINMUX_DATA(D13_MARK, PS3_13_FN1, PTI5_FN),
- PINMUX_DATA(SD_CLK_MARK, PS3_13_FN2, PTI5_FN),
- PINMUX_DATA(D12_MARK, PS3_12_FN1, PTI4_FN),
- PINMUX_DATA(SD_CMD_MARK, PS3_12_FN2, PTI4_FN),
- PINMUX_DATA(D11_MARK, PS3_11_FN1, PTI3_FN),
- PINMUX_DATA(SD_D3_MARK, PS3_11_FN2, PTI3_FN),
- PINMUX_DATA(D10_MARK, PS3_10_FN1, PTI2_FN),
- PINMUX_DATA(SD_D2_MARK, PS3_10_FN2, PTI2_FN),
- PINMUX_DATA(D9_MARK, PS3_9_FN1, PTI1_FN),
- PINMUX_DATA(SD_D1_MARK, PS3_9_FN2, PTI1_FN),
- PINMUX_DATA(D8_MARK, PS3_8_FN1, PTI0_FN),
- PINMUX_DATA(SD_D0_MARK, PS3_8_FN2, PTI0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(RTS3_MARK, PTJ6_FN),
- PINMUX_DATA(CTS3_MARK, PTJ5_FN),
- PINMUX_DATA(TXD3_MARK, PTJ4_FN),
- PINMUX_DATA(RXD3_MARK, PTJ3_FN),
- PINMUX_DATA(RTS4_MARK, PTJ2_FN),
- PINMUX_DATA(RXD4_MARK, PTJ1_FN),
- PINMUX_DATA(TXD4_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(COM2_TXD_MARK, PS3_7_FN1, PTK7_FN),
- PINMUX_DATA(SCK2_MARK, PS3_7_FN2, PTK7_FN),
- PINMUX_DATA(COM2_RXD_MARK, PTK6_FN),
- PINMUX_DATA(COM2_RTS_MARK, PTK5_FN),
- PINMUX_DATA(COM2_CTS_MARK, PTK4_FN),
- PINMUX_DATA(COM2_DTR_MARK, PTK3_FN),
- PINMUX_DATA(COM2_DSR_MARK, PS3_2_FN1, PTK2_FN),
- PINMUX_DATA(SCK4_MARK, PS3_2_FN2, PTK2_FN),
- PINMUX_DATA(COM2_DCD_MARK, PS3_1_FN1, PTK1_FN),
- PINMUX_DATA(SCK3_MARK, PS3_1_FN2, PTK1_FN),
- PINMUX_DATA(CLKOUT_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(RAC_RXD_MARK, PS4_14_FN1, PTL6_FN),
- PINMUX_DATA(RXD2_MARK, PS4_14_FN2, PTL6_FN),
- PINMUX_DATA(RAC_RTS_MARK, PS4_13_FN1, PTL5_FN),
- PINMUX_DATA(CS5_MARK, PS4_13_FN2, PTL5_FN),
- PINMUX_DATA(RAC_CTS_MARK, PS4_12_FN1, PTL4_FN),
- PINMUX_DATA(CS6_MARK, PS4_12_FN2, PTL4_FN),
- PINMUX_DATA(RAC_DTR_MARK, PTL3_FN),
- PINMUX_DATA(RAC_DSR_MARK, PS4_10_FN1, PTL2_FN),
- PINMUX_DATA(AUDSYNC_MARK, PS4_10_FN2, PTL2_FN),
- PINMUX_DATA(RAC_DCD_MARK, PS4_9_FN1, PTL1_FN),
- PINMUX_DATA(AUDCK_MARK, PS4_9_FN2, PTL1_FN),
- PINMUX_DATA(RAC_TXD_MARK, PS4_8_FN1, PTL0_FN),
- PINMUX_DATA(TXD2_MARK, PS4_8_FN1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(CS4_MARK, PTM7_FN),
- PINMUX_DATA(RD_MARK, PTM6_FN),
- PINMUX_DATA(WE0_MARK, PTM7_FN),
- PINMUX_DATA(CS0_MARK, PTM4_FN),
- PINMUX_DATA(SDA6_MARK, PTM3_FN),
- PINMUX_DATA(SCL6_MARK, PTM2_FN),
- PINMUX_DATA(SDA7_MARK, PTM1_FN),
- PINMUX_DATA(SCL7_MARK, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VBUS_EN_MARK, PTN6_FN),
- PINMUX_DATA(VBUS_OC_MARK, PTN5_FN),
- PINMUX_DATA(JMCTCK_MARK, PS4_4_FN1, PTN4_FN),
- PINMUX_DATA(SGPIO1_CLK_MARK, PS4_4_FN2, PTN4_FN),
- PINMUX_DATA(JMCTMS_MARK, PS4_3_FN1, PTN5_FN),
- PINMUX_DATA(SGPIO1_LOAD_MARK, PS4_3_FN2, PTN5_FN),
- PINMUX_DATA(JMCTDO_MARK, PS4_2_FN1, PTN2_FN),
- PINMUX_DATA(SGPIO1_DO_MARK, PS4_2_FN2, PTN2_FN),
- PINMUX_DATA(JMCTDI_MARK, PS4_1_FN1, PTN1_FN),
- PINMUX_DATA(SGPIO1_DI_MARK, PS4_1_FN2, PTN1_FN),
- PINMUX_DATA(JMCTRST_MARK, PS4_0_FN1, PTN0_FN),
- PINMUX_DATA(SUB_CLKIN_MARK, PS4_0_FN2, PTN0_FN),
-
- /* PTO FN */
- PINMUX_DATA(SGPIO0_CLK_MARK, PTO7_FN),
- PINMUX_DATA(SGPIO0_LOAD_MARK, PTO6_FN),
- PINMUX_DATA(SGPIO0_DI_MARK, PTO5_FN),
- PINMUX_DATA(SGPIO0_DO_MARK, PTO4_FN),
- PINMUX_DATA(SGPIO2_CLK_MARK, PS5_11_FN1, PTO3_FN),
- PINMUX_DATA(COM1_TXD_MARK, PS5_11_FN2, PTO3_FN),
- PINMUX_DATA(SGPIO2_LOAD_MARK, PS5_10_FN1, PTO2_FN),
- PINMUX_DATA(COM1_RXD_MARK, PS5_10_FN2, PTO2_FN),
- PINMUX_DATA(SGPIO2_DI_MARK, PS5_9_FN1, PTO1_FN),
- PINMUX_DATA(COM1_RTS_MARK, PS5_9_FN2, PTO1_FN),
- PINMUX_DATA(SGPIO2_DO_MARK, PS5_8_FN1, PTO0_FN),
- PINMUX_DATA(COM1_CTS_MARK, PS5_8_FN2, PTO0_FN),
-
- /* PTP FN */
-
- /* PTQ FN */
- PINMUX_DATA(LAD3_MARK, PTQ6_FN),
- PINMUX_DATA(LAD2_MARK, PTQ5_FN),
- PINMUX_DATA(LAD1_MARK, PTQ4_FN),
- PINMUX_DATA(LAD0_MARK, PTQ3_FN),
- PINMUX_DATA(LFRAME_MARK, PTQ2_FN),
- PINMUX_DATA(LRESET_MARK, PTQ1_FN),
- PINMUX_DATA(LCLK_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(SDA8_MARK, PTR7_FN), /* DDC3? */
- PINMUX_DATA(SCL8_MARK, PTR6_FN), /* DDC2? */
- PINMUX_DATA(SDA2_MARK, PTR5_FN),
- PINMUX_DATA(SCL2_MARK, PTR4_FN),
- PINMUX_DATA(SDA1_MARK, PTR3_FN),
- PINMUX_DATA(SCL1_MARK, PTR2_FN),
- PINMUX_DATA(SDA0_MARK, PTR1_FN),
- PINMUX_DATA(SCL0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SDA9_MARK, PTS7_FN), /* DDC1? */
- PINMUX_DATA(SCL9_MARK, PTS6_FN), /* DDC0? */
- PINMUX_DATA(SDA5_MARK, PTS5_FN),
- PINMUX_DATA(SCL5_MARK, PTS4_FN),
- PINMUX_DATA(SDA4_MARK, PTS3_FN),
- PINMUX_DATA(SCL4_MARK, PTS2_FN),
- PINMUX_DATA(SDA3_MARK, PTS1_FN),
- PINMUX_DATA(SCL3_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(PWMX7_MARK, PS5_7_FN1, PTT7_FN),
- PINMUX_DATA(AUDATA3_MARK, PS5_7_FN2, PTT7_FN),
- PINMUX_DATA(PWMX6_MARK, PS5_6_FN1, PTT6_FN),
- PINMUX_DATA(AUDATA2_MARK, PS5_6_FN2, PTT6_FN),
- PINMUX_DATA(PWMX5_MARK, PS5_5_FN1, PTT5_FN),
- PINMUX_DATA(AUDATA1_MARK, PS5_5_FN2, PTT5_FN),
- PINMUX_DATA(PWMX4_MARK, PS5_4_FN1, PTT4_FN),
- PINMUX_DATA(AUDATA0_MARK, PS5_4_FN2, PTT4_FN),
- PINMUX_DATA(PWMX3_MARK, PS5_3_FN1, PTT3_FN),
- PINMUX_DATA(STATUS1_MARK, PS5_3_FN2, PTT3_FN),
- PINMUX_DATA(PWMX2_MARK, PS5_2_FN1, PTT2_FN),
- PINMUX_DATA(STATUS0_MARK, PS5_2_FN2, PTT2_FN),
- PINMUX_DATA(PWMX1_MARK, PTT1_FN),
- PINMUX_DATA(PWMX0_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(LGPIO7_MARK, PS6_15_FN1, PTU7_FN),
- PINMUX_DATA(APMONCTL_O_MARK, PS6_15_FN2, PTU7_FN),
- PINMUX_DATA(LGPIO6_MARK, PS6_14_FN1, PTU6_FN),
- PINMUX_DATA(APMPWBTOUT_O_MARK, PS6_14_FN2, PTU6_FN),
- PINMUX_DATA(LGPIO5_MARK, PS6_13_FN1, PTU5_FN),
- PINMUX_DATA(APMSCI_O_MARK, PS6_13_FN2, PTU5_FN),
- PINMUX_DATA(LGPIO4_MARK, PS6_12_FN1, PTU4_FN),
- PINMUX_DATA(APMVDDON_MARK, PS6_12_FN2, PTU4_FN),
- PINMUX_DATA(LGPIO3_MARK, PS6_11_FN1, PTU3_FN),
- PINMUX_DATA(APMSLPBTN_MARK, PS6_11_FN2, PTU3_FN),
- PINMUX_DATA(LGPIO2_MARK, PS6_10_FN1, PTU2_FN),
- PINMUX_DATA(APMPWRBTN_MARK, PS6_10_FN2, PTU2_FN),
- PINMUX_DATA(LGPIO1_MARK, PS6_9_FN1, PTU1_FN),
- PINMUX_DATA(APMS5N_MARK, PS6_9_FN2, PTU1_FN),
- PINMUX_DATA(LGPIO0_MARK, PS6_8_FN1, PTU0_FN),
- PINMUX_DATA(APMS3N_MARK, PS6_8_FN2, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(A23_MARK, PS6_7_FN1, PTV7_FN),
- PINMUX_DATA(COM2_RI_MARK, PS6_7_FN2, PTV7_FN),
- PINMUX_DATA(A22_MARK, PS6_6_FN1, PTV6_FN),
- PINMUX_DATA(R_SPI_MOSI_MARK, PS6_6_FN2, PTV6_FN),
- PINMUX_DATA(A21_MARK, PS6_5_FN1, PTV5_FN),
- PINMUX_DATA(R_SPI_MISO_MARK, PS6_5_FN2, PTV5_FN),
- PINMUX_DATA(A20_MARK, PS6_4_FN1, PTV4_FN),
- PINMUX_DATA(R_SPI_RSPCK_MARK, PS6_4_FN2, PTV4_FN),
- PINMUX_DATA(A19_MARK, PS6_3_FN1, PTV3_FN),
- PINMUX_DATA(R_SPI_SSL0_MARK, PS6_3_FN2, PTV3_FN),
- PINMUX_DATA(A18_MARK, PS6_2_FN1, PTV2_FN),
- PINMUX_DATA(R_SPI_SSL1_MARK, PS6_2_FN2, PTV2_FN),
- PINMUX_DATA(A17_MARK, PS6_1_FN1, PTV1_FN),
- PINMUX_DATA(EVENT7_MARK, PS6_1_FN2, PTV1_FN),
- PINMUX_DATA(A16_MARK, PS6_0_FN1, PTV0_FN),
- PINMUX_DATA(EVENT6_MARK, PS6_0_FN1, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(A15_MARK, PS7_15_FN1, PTW7_FN),
- PINMUX_DATA(EVENT5_MARK, PS7_15_FN2, PTW7_FN),
- PINMUX_DATA(A14_MARK, PS7_14_FN1, PTW6_FN),
- PINMUX_DATA(EVENT4_MARK, PS7_14_FN2, PTW6_FN),
- PINMUX_DATA(A13_MARK, PS7_13_FN1, PTW5_FN),
- PINMUX_DATA(EVENT3_MARK, PS7_13_FN2, PTW5_FN),
- PINMUX_DATA(A12_MARK, PS7_12_FN1, PTW4_FN),
- PINMUX_DATA(EVENT2_MARK, PS7_12_FN2, PTW4_FN),
- PINMUX_DATA(A11_MARK, PS7_11_FN1, PTW3_FN),
- PINMUX_DATA(EVENT1_MARK, PS7_11_FN2, PTW3_FN),
- PINMUX_DATA(A10_MARK, PS7_10_FN1, PTW2_FN),
- PINMUX_DATA(EVENT0_MARK, PS7_10_FN2, PTW2_FN),
- PINMUX_DATA(A9_MARK, PS7_9_FN1, PTW1_FN),
- PINMUX_DATA(CTS4_MARK, PS7_9_FN2, PTW1_FN),
- PINMUX_DATA(A8_MARK, PS7_8_FN1, PTW0_FN),
- PINMUX_DATA(CTS2_MARK, PS7_8_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(A7_MARK, PS7_7_FN1, PTX7_FN),
- PINMUX_DATA(RTS2_MARK, PS7_7_FN2, PTX7_FN),
- PINMUX_DATA(A6_MARK, PS7_6_FN1, PTX6_FN),
- PINMUX_DATA(SIM_D_MARK, PS7_6_FN2, PTX6_FN),
- PINMUX_DATA(A5_MARK, PS7_5_FN1, PTX5_FN),
- PINMUX_DATA(SIM_CLK_MARK, PS7_5_FN2, PTX5_FN),
- PINMUX_DATA(A4_MARK, PS7_4_FN1, PTX4_FN),
- PINMUX_DATA(SIM_RST_MARK, PS7_4_FN2, PTX4_FN),
- PINMUX_DATA(A3_MARK, PTX3_FN),
- PINMUX_DATA(A2_MARK, PTX2_FN),
- PINMUX_DATA(A1_MARK, PTX1_FN),
- PINMUX_DATA(A0_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(D7_MARK, PTY7_FN),
- PINMUX_DATA(D6_MARK, PTY6_FN),
- PINMUX_DATA(D5_MARK, PTY5_FN),
- PINMUX_DATA(D4_MARK, PTY4_FN),
- PINMUX_DATA(D3_MARK, PTY3_FN),
- PINMUX_DATA(D2_MARK, PTY2_FN),
- PINMUX_DATA(D1_MARK, PTY1_FN),
- PINMUX_DATA(D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(MMCDAT7_MARK, PS8_15_FN1, PTZ7_FN),
- PINMUX_DATA(ON_DQ7_MARK, PS8_15_FN2, PTZ7_FN),
- PINMUX_DATA(MMCDAT6_MARK, PS8_14_FN1, PTZ6_FN),
- PINMUX_DATA(ON_DQ6_MARK, PS8_14_FN2, PTZ6_FN),
- PINMUX_DATA(MMCDAT5_MARK, PS8_13_FN1, PTZ5_FN),
- PINMUX_DATA(ON_DQ5_MARK, PS8_13_FN2, PTZ5_FN),
- PINMUX_DATA(MMCDAT4_MARK, PS8_12_FN1, PTZ4_FN),
- PINMUX_DATA(ON_DQ4_MARK, PS8_12_FN2, PTZ4_FN),
- PINMUX_DATA(MMCDAT3_MARK, PS8_11_FN1, PTZ3_FN),
- PINMUX_DATA(ON_DQ3_MARK, PS8_11_FN2, PTZ3_FN),
- PINMUX_DATA(MMCDAT2_MARK, PS8_10_FN1, PTZ2_FN),
- PINMUX_DATA(ON_DQ2_MARK, PS8_10_FN2, PTZ2_FN),
- PINMUX_DATA(MMCDAT1_MARK, PS8_9_FN1, PTZ1_FN),
- PINMUX_DATA(ON_DQ1_MARK, PS8_9_FN2, PTZ1_FN),
- PINMUX_DATA(MMCDAT0_MARK, PS8_8_FN1, PTZ0_FN),
- PINMUX_DATA(ON_DQ0_MARK, PS8_8_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG7),
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTI */
- PINMUX_GPIO(PTI7),
- PINMUX_GPIO(PTI6),
- PINMUX_GPIO(PTI5),
- PINMUX_GPIO(PTI4),
- PINMUX_GPIO(PTI3),
- PINMUX_GPIO(PTI2),
- PINMUX_GPIO(PTI1),
- PINMUX_GPIO(PTI0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTO */
- PINMUX_GPIO(PTO7),
- PINMUX_GPIO(PTO6),
- PINMUX_GPIO(PTO5),
- PINMUX_GPIO(PTO4),
- PINMUX_GPIO(PTO3),
- PINMUX_GPIO(PTO2),
- PINMUX_GPIO(PTO1),
- PINMUX_GPIO(PTO0),
-
- /* PTP */
- PINMUX_GPIO(PTP7),
- PINMUX_GPIO(PTP6),
- PINMUX_GPIO(PTP5),
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN(BS),
- GPIO_FN(RDWR),
- GPIO_FN(WE1),
- GPIO_FN(RDY),
- GPIO_FN(ET0_MDC),
- GPIO_FN(ET0_MDIO),
- GPIO_FN(ET1_MDC),
- GPIO_FN(ET1_MDIO),
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN(IRQ15),
- GPIO_FN(IRQ14),
- GPIO_FN(IRQ13),
- GPIO_FN(IRQ12),
- GPIO_FN(IRQ11),
- GPIO_FN(IRQ10),
- GPIO_FN(IRQ9),
- GPIO_FN(IRQ8),
- GPIO_FN(ON_NRE),
- GPIO_FN(ON_NWE),
- GPIO_FN(ON_NWP),
- GPIO_FN(ON_NCE0),
- GPIO_FN(ON_R_B0),
- GPIO_FN(ON_ALE),
- GPIO_FN(ON_CLE),
- GPIO_FN(TCLK),
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN(IRQ7),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(PWMU0),
- GPIO_FN(PWMU1),
- GPIO_FN(PWMU2),
- GPIO_FN(PWMU3),
- GPIO_FN(PWMU4),
- GPIO_FN(PWMU5),
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN(SP0_MOSI),
- GPIO_FN(SP0_MISO),
- GPIO_FN(SP0_SCK),
- GPIO_FN(SP0_SCK_FB),
- GPIO_FN(SP0_SS0),
- GPIO_FN(SP0_SS1),
- GPIO_FN(SP0_SS2),
- GPIO_FN(SP0_SS3),
- GPIO_FN(DREQ0),
- GPIO_FN(DACK0),
- GPIO_FN(TEND0),
-
- /* PTE (mobule: RMII) */
- GPIO_FN(RMII0_CRS_DV),
- GPIO_FN(RMII0_TXD1),
- GPIO_FN(RMII0_TXD0),
- GPIO_FN(RMII0_TXEN),
- GPIO_FN(RMII0_REFCLK),
- GPIO_FN(RMII0_RXD1),
- GPIO_FN(RMII0_RXD0),
- GPIO_FN(RMII0_RX_ER),
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN(RMII1_CRS_DV),
- GPIO_FN(RMII1_TXD1),
- GPIO_FN(RMII1_TXD0),
- GPIO_FN(RMII1_TXEN),
- GPIO_FN(RMII1_REFCLK),
- GPIO_FN(RMII1_RXD1),
- GPIO_FN(RMII1_RXD0),
- GPIO_FN(RMII1_RX_ER),
- GPIO_FN(RAC_RI),
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN(BOOTFMS),
- GPIO_FN(BOOTWP),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(SERIRQ),
- GPIO_FN(WDTOVF),
- GPIO_FN(LPCPD),
- GPIO_FN(LDRQ),
- GPIO_FN(MMCCLK),
- GPIO_FN(MMCCMD),
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN(SP1_MOSI),
- GPIO_FN(SP1_MISO),
- GPIO_FN(SP1_SCK),
- GPIO_FN(SP1_SCK_FB),
- GPIO_FN(SP1_SS0),
- GPIO_FN(SP1_SS1),
- GPIO_FN(WP),
- GPIO_FN(FMS0),
- GPIO_FN(TEND1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK1),
- GPIO_FN(ADTRG1),
- GPIO_FN(ADTRG0),
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(SD_WP),
- GPIO_FN(SD_CD),
- GPIO_FN(SD_CLK),
- GPIO_FN(SD_CMD),
- GPIO_FN(SD_D3),
- GPIO_FN(SD_D2),
- GPIO_FN(SD_D1),
- GPIO_FN(SD_D0),
-
- /* PTJ (mobule: SCIF234, SERMUX) */
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(RTS4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD4),
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN(COM2_TXD),
- GPIO_FN(COM2_RXD),
- GPIO_FN(COM2_RTS),
- GPIO_FN(COM2_CTS),
- GPIO_FN(COM2_DTR),
- GPIO_FN(COM2_DSR),
- GPIO_FN(COM2_DCD),
- GPIO_FN(CLKOUT),
- GPIO_FN(SCK2),
- GPIO_FN(SCK4),
- GPIO_FN(SCK3),
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN(RAC_RXD),
- GPIO_FN(RAC_RTS),
- GPIO_FN(RAC_CTS),
- GPIO_FN(RAC_DTR),
- GPIO_FN(RAC_DSR),
- GPIO_FN(RAC_DCD),
- GPIO_FN(RAC_TXD),
- GPIO_FN(RXD2),
- GPIO_FN(CS5),
- GPIO_FN(CS6),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDCK),
- GPIO_FN(TXD2),
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN(CS4),
- GPIO_FN(RD),
- GPIO_FN(WE0),
- GPIO_FN(CS0),
- GPIO_FN(SDA6),
- GPIO_FN(SCL6),
- GPIO_FN(SDA7),
- GPIO_FN(SCL7),
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN(VBUS_EN),
- GPIO_FN(VBUS_OC),
- GPIO_FN(JMCTCK),
- GPIO_FN(JMCTMS),
- GPIO_FN(JMCTDO),
- GPIO_FN(JMCTDI),
- GPIO_FN(JMCTRST),
- GPIO_FN(SGPIO1_CLK),
- GPIO_FN(SGPIO1_LOAD),
- GPIO_FN(SGPIO1_DI),
- GPIO_FN(SGPIO1_DO),
- GPIO_FN(SUB_CLKIN),
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN(SGPIO0_CLK),
- GPIO_FN(SGPIO0_LOAD),
- GPIO_FN(SGPIO0_DI),
- GPIO_FN(SGPIO0_DO),
- GPIO_FN(SGPIO2_CLK),
- GPIO_FN(SGPIO2_LOAD),
- GPIO_FN(SGPIO2_DI),
- GPIO_FN(SGPIO2_DO),
- GPIO_FN(COM1_TXD),
- GPIO_FN(COM1_RXD),
- GPIO_FN(COM1_RTS),
- GPIO_FN(COM1_CTS),
-
- /* PTP (mobule: EVC, ADC) */
-
- /* PTQ (mobule: LPC) */
- GPIO_FN(LAD3),
- GPIO_FN(LAD2),
- GPIO_FN(LAD1),
- GPIO_FN(LAD0),
- GPIO_FN(LFRAME),
- GPIO_FN(LRESET),
- GPIO_FN(LCLK),
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN(DDC3),
- GPIO_FN(DDC2),
- GPIO_FN(SDA8),
- GPIO_FN(SCL8),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN(DDC1),
- GPIO_FN(DDC0),
- GPIO_FN(SDA9),
- GPIO_FN(SCL9),
- GPIO_FN(SDA5),
- GPIO_FN(SCL5),
- GPIO_FN(SDA4),
- GPIO_FN(SCL4),
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN(PWMX7),
- GPIO_FN(PWMX6),
- GPIO_FN(PWMX5),
- GPIO_FN(PWMX4),
- GPIO_FN(PWMX3),
- GPIO_FN(PWMX2),
- GPIO_FN(PWMX1),
- GPIO_FN(PWMX0),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN(LGPIO7),
- GPIO_FN(LGPIO6),
- GPIO_FN(LGPIO5),
- GPIO_FN(LGPIO4),
- GPIO_FN(LGPIO3),
- GPIO_FN(LGPIO2),
- GPIO_FN(LGPIO1),
- GPIO_FN(LGPIO0),
- GPIO_FN(APMONCTL_O),
- GPIO_FN(APMPWBTOUT_O),
- GPIO_FN(APMSCI_O),
- GPIO_FN(APMVDDON),
- GPIO_FN(APMSLPBTN),
- GPIO_FN(APMPWRBTN),
- GPIO_FN(APMS5N),
- GPIO_FN(APMS3N),
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(COM2_RI),
- GPIO_FN(R_SPI_MOSI),
- GPIO_FN(R_SPI_MISO),
- GPIO_FN(R_SPI_RSPCK),
- GPIO_FN(R_SPI_SSL0),
- GPIO_FN(R_SPI_SSL1),
- GPIO_FN(EVENT7),
- GPIO_FN(EVENT6),
- GPIO_FN(VBIOS_DI),
- GPIO_FN(VBIOS_DO),
- GPIO_FN(VBIOS_CLK),
- GPIO_FN(VBIOS_CS),
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(EVENT5),
- GPIO_FN(EVENT4),
- GPIO_FN(EVENT3),
- GPIO_FN(EVENT2),
- GPIO_FN(EVENT1),
- GPIO_FN(EVENT0),
- GPIO_FN(CTS4),
- GPIO_FN(CTS2),
-
- /* PTX (mobule: LBSC) */
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(RTS2),
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* PTY (mobule: LBSC) */
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN(MMCDAT7),
- GPIO_FN(MMCDAT6),
- GPIO_FN(MMCDAT5),
- GPIO_FN(MMCDAT4),
- GPIO_FN(MMCDAT3),
- GPIO_FN(MMCDAT2),
- GPIO_FN(MMCDAT1),
- GPIO_FN(MMCDAT0),
- GPIO_FN(ON_DQ7),
- GPIO_FN(ON_DQ6),
- GPIO_FN(ON_DQ5),
- GPIO_FN(ON_DQ4),
- GPIO_FN(ON_DQ3),
- GPIO_FN(ON_DQ2),
- GPIO_FN(ON_DQ1),
- GPIO_FN(ON_DQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffec0000, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, PTA7_IN, 0,
- PTA6_FN, PTA6_OUT, PTA6_IN, 0,
- PTA5_FN, PTA5_OUT, PTA5_IN, 0,
- PTA4_FN, PTA4_OUT, PTA4_IN, 0,
- PTA3_FN, PTA3_OUT, PTA3_IN, 0,
- PTA2_FN, PTA2_OUT, PTA2_IN, 0,
- PTA1_FN, PTA1_OUT, PTA1_IN, 0,
- PTA0_FN, PTA0_OUT, PTA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffec0002, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, PTB7_IN, 0,
- PTB6_FN, PTB6_OUT, PTB6_IN, 0,
- PTB5_FN, PTB5_OUT, PTB5_IN, 0,
- PTB4_FN, PTB4_OUT, PTB4_IN, 0,
- PTB3_FN, PTB3_OUT, PTB3_IN, 0,
- PTB2_FN, PTB2_OUT, PTB2_IN, 0,
- PTB1_FN, PTB1_OUT, PTB1_IN, 0,
- PTB0_FN, PTB0_OUT, PTB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffec0004, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, PTC7_IN, 0,
- PTC6_FN, PTC6_OUT, PTC6_IN, 0,
- PTC5_FN, PTC5_OUT, PTC5_IN, 0,
- PTC4_FN, PTC4_OUT, PTC4_IN, 0,
- PTC3_FN, PTC3_OUT, PTC3_IN, 0,
- PTC2_FN, PTC2_OUT, PTC2_IN, 0,
- PTC1_FN, PTC1_OUT, PTC1_IN, 0,
- PTC0_FN, PTC0_OUT, PTC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffec0006, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, PTD7_IN, 0,
- PTD6_FN, PTD6_OUT, PTD6_IN, 0,
- PTD5_FN, PTD5_OUT, PTD5_IN, 0,
- PTD4_FN, PTD4_OUT, PTD4_IN, 0,
- PTD3_FN, PTD3_OUT, PTD3_IN, 0,
- PTD2_FN, PTD2_OUT, PTD2_IN, 0,
- PTD1_FN, PTD1_OUT, PTD1_IN, 0,
- PTD0_FN, PTD0_OUT, PTD0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PECR", 0xffec0008, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, PTE7_IN, 0,
- PTE6_FN, PTE6_OUT, PTE6_IN, 0,
- PTE5_FN, PTE5_OUT, PTE5_IN, 0,
- PTE4_FN, PTE4_OUT, PTE4_IN, 0,
- PTE3_FN, PTE3_OUT, PTE3_IN, 0,
- PTE2_FN, PTE2_OUT, PTE2_IN, 0,
- PTE1_FN, PTE1_OUT, PTE1_IN, 0,
- PTE0_FN, PTE0_OUT, PTE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffec000a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, PTF7_IN, 0,
- PTF6_FN, PTF6_OUT, PTF6_IN, 0,
- PTF5_FN, PTF5_OUT, PTF5_IN, 0,
- PTF4_FN, PTF4_OUT, PTF4_IN, 0,
- PTF3_FN, PTF3_OUT, PTF3_IN, 0,
- PTF2_FN, PTF2_OUT, PTF2_IN, 0,
- PTF1_FN, PTF1_OUT, PTF1_IN, 0,
- PTF0_FN, PTF0_OUT, PTF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffec000c, 16, 2, GROUP(
- PTG7_FN, PTG7_OUT, PTG7_IN, 0,
- PTG6_FN, PTG6_OUT, PTG6_IN, 0,
- PTG5_FN, PTG5_OUT, PTG5_IN, 0,
- PTG4_FN, PTG4_OUT, PTG4_IN, 0,
- PTG3_FN, PTG3_OUT, PTG3_IN, 0,
- PTG2_FN, PTG2_OUT, PTG2_IN, 0,
- PTG1_FN, PTG1_OUT, PTG1_IN, 0,
- PTG0_FN, PTG0_OUT, PTG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffec000e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, PTH7_IN, 0,
- PTH6_FN, PTH6_OUT, PTH6_IN, 0,
- PTH5_FN, PTH5_OUT, PTH5_IN, 0,
- PTH4_FN, PTH4_OUT, PTH4_IN, 0,
- PTH3_FN, PTH3_OUT, PTH3_IN, 0,
- PTH2_FN, PTH2_OUT, PTH2_IN, 0,
- PTH1_FN, PTH1_OUT, PTH1_IN, 0,
- PTH0_FN, PTH0_OUT, PTH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PICR", 0xffec0010, 16, 2, GROUP(
- PTI7_FN, PTI7_OUT, PTI7_IN, 0,
- PTI6_FN, PTI6_OUT, PTI6_IN, 0,
- PTI5_FN, PTI5_OUT, PTI5_IN, 0,
- PTI4_FN, PTI4_OUT, PTI4_IN, 0,
- PTI3_FN, PTI3_OUT, PTI3_IN, 0,
- PTI2_FN, PTI2_OUT, PTI2_IN, 0,
- PTI1_FN, PTI1_OUT, PTI1_IN, 0,
- PTI0_FN, PTI0_OUT, PTI0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffec0012, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTJ6_FN, PTJ6_OUT, PTJ6_IN, 0,
- PTJ5_FN, PTJ5_OUT, PTJ5_IN, 0,
- PTJ4_FN, PTJ4_OUT, PTJ4_IN, 0,
- PTJ3_FN, PTJ3_OUT, PTJ3_IN, 0,
- PTJ2_FN, PTJ2_OUT, PTJ2_IN, 0,
- PTJ1_FN, PTJ1_OUT, PTJ1_IN, 0,
- PTJ0_FN, PTJ0_OUT, PTJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffec0014, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, PTK7_IN, 0,
- PTK6_FN, PTK6_OUT, PTK6_IN, 0,
- PTK5_FN, PTK5_OUT, PTK5_IN, 0,
- PTK4_FN, PTK4_OUT, PTK4_IN, 0,
- PTK3_FN, PTK3_OUT, PTK3_IN, 0,
- PTK2_FN, PTK2_OUT, PTK2_IN, 0,
- PTK1_FN, PTK1_OUT, PTK1_IN, 0,
- PTK0_FN, PTK0_OUT, PTK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffec0016, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTL6_FN, PTL6_OUT, PTL6_IN, 0,
- PTL5_FN, PTL5_OUT, PTL5_IN, 0,
- PTL4_FN, PTL4_OUT, PTL4_IN, 0,
- PTL3_FN, PTL3_OUT, PTL3_IN, 0,
- PTL2_FN, PTL2_OUT, PTL2_IN, 0,
- PTL1_FN, PTL1_OUT, PTL1_IN, 0,
- PTL0_FN, PTL0_OUT, PTL0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PMCR", 0xffec0018, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, PTM7_IN, 0,
- PTM6_FN, PTM6_OUT, PTM6_IN, 0,
- PTM5_FN, PTM5_OUT, PTM5_IN, 0,
- PTM4_FN, PTM4_OUT, PTM4_IN, 0,
- PTM3_FN, PTM3_OUT, PTM3_IN, 0,
- PTM2_FN, PTM2_OUT, PTM2_IN, 0,
- PTM1_FN, PTM1_OUT, PTM1_IN, 0,
- PTM0_FN, PTM0_OUT, PTM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffec001a, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTN6_FN, PTN6_OUT, PTN6_IN, 0,
- PTN5_FN, PTN5_OUT, PTN5_IN, 0,
- PTN4_FN, PTN4_OUT, PTN4_IN, 0,
- PTN3_FN, PTN3_OUT, PTN3_IN, 0,
- PTN2_FN, PTN2_OUT, PTN2_IN, 0,
- PTN1_FN, PTN1_OUT, PTN1_IN, 0,
- PTN0_FN, PTN0_OUT, PTN0_IN, 0 ))
- },
- { PINMUX_CFG_REG("POCR", 0xffec001c, 16, 2, GROUP(
- PTO7_FN, PTO7_OUT, PTO7_IN, 0,
- PTO6_FN, PTO6_OUT, PTO6_IN, 0,
- PTO5_FN, PTO5_OUT, PTO5_IN, 0,
- PTO4_FN, PTO4_OUT, PTO4_IN, 0,
- PTO3_FN, PTO3_OUT, PTO3_IN, 0,
- PTO2_FN, PTO2_OUT, PTO2_IN, 0,
- PTO1_FN, PTO1_OUT, PTO1_IN, 0,
- PTO0_FN, PTO0_OUT, PTO0_IN, 0 ))
- },
-#if 0 /* FIXME: Remove it? */
- { PINMUX_CFG_REG("PPCR", 0xffec001e, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTP6_FN, PTP6_OUT, PTP6_IN, 0,
- PTP5_FN, PTP5_OUT, PTP5_IN, 0,
- PTP4_FN, PTP4_OUT, PTP4_IN, 0,
- PTP3_FN, PTP3_OUT, PTP3_IN, 0,
- PTP2_FN, PTP2_OUT, PTP2_IN, 0,
- PTP1_FN, PTP1_OUT, PTP1_IN, 0,
- PTP0_FN, PTP0_OUT, PTP0_IN, 0 ))
- },
-#endif
- { PINMUX_CFG_REG("PQCR", 0xffec0020, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTQ6_FN, PTQ6_OUT, PTQ6_IN, 0,
- PTQ5_FN, PTQ5_OUT, PTQ5_IN, 0,
- PTQ4_FN, PTQ4_OUT, PTQ4_IN, 0,
- PTQ3_FN, PTQ3_OUT, PTQ3_IN, 0,
- PTQ2_FN, PTQ2_OUT, PTQ2_IN, 0,
- PTQ1_FN, PTQ1_OUT, PTQ1_IN, 0,
- PTQ0_FN, PTQ0_OUT, PTQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PRCR", 0xffec0022, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, PTR7_IN, 0,
- PTR6_FN, PTR6_OUT, PTR6_IN, 0,
- PTR5_FN, PTR5_OUT, PTR5_IN, 0,
- PTR4_FN, PTR4_OUT, PTR4_IN, 0,
- PTR3_FN, PTR3_OUT, PTR3_IN, 0,
- PTR2_FN, PTR2_OUT, PTR2_IN, 0,
- PTR1_FN, PTR1_OUT, PTR1_IN, 0,
- PTR0_FN, PTR0_OUT, PTR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PSCR", 0xffec0024, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, PTS7_IN, 0,
- PTS6_FN, PTS6_OUT, PTS6_IN, 0,
- PTS5_FN, PTS5_OUT, PTS5_IN, 0,
- PTS4_FN, PTS4_OUT, PTS4_IN, 0,
- PTS3_FN, PTS3_OUT, PTS3_IN, 0,
- PTS2_FN, PTS2_OUT, PTS2_IN, 0,
- PTS1_FN, PTS1_OUT, PTS1_IN, 0,
- PTS0_FN, PTS0_OUT, PTS0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PTCR", 0xffec0026, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, PTT7_IN, 0,
- PTT6_FN, PTT6_OUT, PTT6_IN, 0,
- PTT5_FN, PTT5_OUT, PTT5_IN, 0,
- PTT4_FN, PTT4_OUT, PTT4_IN, 0,
- PTT3_FN, PTT3_OUT, PTT3_IN, 0,
- PTT2_FN, PTT2_OUT, PTT2_IN, 0,
- PTT1_FN, PTT1_OUT, PTT1_IN, 0,
- PTT0_FN, PTT0_OUT, PTT0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PUCR", 0xffec0028, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, PTU7_IN, 0,
- PTU6_FN, PTU6_OUT, PTU6_IN, 0,
- PTU5_FN, PTU5_OUT, PTU5_IN, 0,
- PTU4_FN, PTU4_OUT, PTU4_IN, 0,
- PTU3_FN, PTU3_OUT, PTU3_IN, 0,
- PTU2_FN, PTU2_OUT, PTU2_IN, 0,
- PTU1_FN, PTU1_OUT, PTU1_IN, 0,
- PTU0_FN, PTU0_OUT, PTU0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PVCR", 0xffec002a, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, PTV7_IN, 0,
- PTV6_FN, PTV6_OUT, PTV6_IN, 0,
- PTV5_FN, PTV5_OUT, PTV5_IN, 0,
- PTV4_FN, PTV4_OUT, PTV4_IN, 0,
- PTV3_FN, PTV3_OUT, PTV3_IN, 0,
- PTV2_FN, PTV2_OUT, PTV2_IN, 0,
- PTV1_FN, PTV1_OUT, PTV1_IN, 0,
- PTV0_FN, PTV0_OUT, PTV0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PWCR", 0xffec002c, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, PTW7_IN, 0,
- PTW6_FN, PTW6_OUT, PTW6_IN, 0,
- PTW5_FN, PTW5_OUT, PTW5_IN, 0,
- PTW4_FN, PTW4_OUT, PTW4_IN, 0,
- PTW3_FN, PTW3_OUT, PTW3_IN, 0,
- PTW2_FN, PTW2_OUT, PTW2_IN, 0,
- PTW1_FN, PTW1_OUT, PTW1_IN, 0,
- PTW0_FN, PTW0_OUT, PTW0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PXCR", 0xffec002e, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, PTX7_IN, 0,
- PTX6_FN, PTX6_OUT, PTX6_IN, 0,
- PTX5_FN, PTX5_OUT, PTX5_IN, 0,
- PTX4_FN, PTX4_OUT, PTX4_IN, 0,
- PTX3_FN, PTX3_OUT, PTX3_IN, 0,
- PTX2_FN, PTX2_OUT, PTX2_IN, 0,
- PTX1_FN, PTX1_OUT, PTX1_IN, 0,
- PTX0_FN, PTX0_OUT, PTX0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PYCR", 0xffec0030, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, PTY7_IN, 0,
- PTY6_FN, PTY6_OUT, PTY6_IN, 0,
- PTY5_FN, PTY5_OUT, PTY5_IN, 0,
- PTY4_FN, PTY4_OUT, PTY4_IN, 0,
- PTY3_FN, PTY3_OUT, PTY3_IN, 0,
- PTY2_FN, PTY2_OUT, PTY2_IN, 0,
- PTY1_FN, PTY1_OUT, PTY1_IN, 0,
- PTY0_FN, PTY0_OUT, PTY0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PZCR", 0xffec0032, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, PTZ7_IN, 0,
- PTZ6_FN, PTZ6_OUT, PTZ6_IN, 0,
- PTZ5_FN, PTZ5_OUT, PTZ5_IN, 0,
- PTZ4_FN, PTZ4_OUT, PTZ4_IN, 0,
- PTZ3_FN, PTZ3_OUT, PTZ3_IN, 0,
- PTZ2_FN, PTZ2_OUT, PTZ2_IN, 0,
- PTZ1_FN, PTZ1_OUT, PTZ1_IN, 0,
- PTZ0_FN, PTZ0_OUT, PTZ0_IN, 0 ))
- },
-
- { PINMUX_CFG_REG("PSEL0", 0xffec0070, 16, 1, GROUP(
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
- 0, 0,
- 0, 0, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL1", 0xffec0072, 16,
- GROUP(-5, 1, 1, 1, -5, 1, -2),
- GROUP(
- /* RESERVED [5] */
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- /* RESERVED [5] */
- PS1_2_FN1, PS1_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL2", 0xffec0074, 16,
- GROUP(-2, 1, 1, -4, 1, 1, 1, 1, -1, 1, -2),
- GROUP(
- /* RESERVED [2] */
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- /* RESERVED [4] */
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- /* RESERVED [1] */
- PS2_2_FN1, PS2_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL3", 0xffec0076, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, -4, 1, 1, -1),
- GROUP(
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- /* RESERVED [4] */
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
- /* RESERVED [1] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PSEL4", 0xffec0078, 16,
- GROUP(-1, 1, 1, 1, -1, 1, 1, 1, -3, 1, 1, 1,
- 1, 1),
- GROUP(
- /* RESERVED [1] */
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- /* RESERVED [1] */
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- /* RESERVED [3] */
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL5", 0xffec007a, 16,
- GROUP(-4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -2),
- GROUP(
- /* RESERVED [4] */
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG("PSEL6", 0xffec007c, 16, 1, GROUP(
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL7", 0xffec0082, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -5),
- GROUP(
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- /* RESERVED [5] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL8", 0xffec0084, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffec0034, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffec0036, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffec0038, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffec003a, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffec003c, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffec003e, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffec0040, 8, GROUP(
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffec0042, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PIDR", 0xffec0044, 8, GROUP(
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffec0046, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffec0048, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffec004a, 8, GROUP(
- 0, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffec004c, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffec004e, 8, GROUP(
- 0, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PODR", 0xffec0050, 8, GROUP(
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffec0052, 8, GROUP(
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffec0054, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffec0056, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xffec0058, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xffec005a, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xffec005c, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xffec005e, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xffec0060, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xffec0062, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xffec0064, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xffec0066, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7757_pinmux_info = {
- .name = "sh7757_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7785.c b/drivers/pinctrl/renesas/pfc-sh7785.c
deleted file mode 100644
index 126b663bb6eb3a..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7785.c
+++ /dev/null
@@ -1,1258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7785.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA,
- PM1_DATA, PM0_DATA,
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA,
- PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA,
- PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PL7_IN, PL6_IN, PL5_IN, PL4_IN,
- PL3_IN, PL2_IN, PL1_IN, PL0_IN,
- PM1_IN, PM0_IN,
- PN7_IN, PN6_IN, PN5_IN, PN4_IN,
- PN3_IN, PN2_IN, PN1_IN, PN0_IN,
- PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN,
- PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN,
- PR3_IN, PR2_IN, PR1_IN, PR0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT,
- PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT,
- PM1_OUT, PM0_OUT,
- PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT,
- PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT,
- PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT,
- PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT,
- PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN,
- PK7_FN, PK6_FN, PK5_FN, PK4_FN,
- PK3_FN, PK2_FN, PK1_FN, PK0_FN,
- PL7_FN, PL6_FN, PL5_FN, PL4_FN,
- PL3_FN, PL2_FN, PL1_FN, PL0_FN,
- PM1_FN, PM0_FN,
- PN7_FN, PN6_FN, PN5_FN, PN4_FN,
- PN3_FN, PN2_FN, PN1_FN, PN0_FN,
- PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN,
- PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN,
- PR3_FN, PR2_FN, PR1_FN, PR0_FN,
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D63_AD31_MARK,
- D62_AD30_MARK,
- D61_AD29_MARK,
- D60_AD28_MARK,
- D59_AD27_MARK,
- D58_AD26_MARK,
- D57_AD25_MARK,
- D56_AD24_MARK,
- D55_AD23_MARK,
- D54_AD22_MARK,
- D53_AD21_MARK,
- D52_AD20_MARK,
- D51_AD19_MARK,
- D50_AD18_MARK,
- D49_AD17_DB5_MARK,
- D48_AD16_DB4_MARK,
- D47_AD15_DB3_MARK,
- D46_AD14_DB2_MARK,
- D45_AD13_DB1_MARK,
- D44_AD12_DB0_MARK,
- D43_AD11_DG5_MARK,
- D42_AD10_DG4_MARK,
- D41_AD9_DG3_MARK,
- D40_AD8_DG2_MARK,
- D39_AD7_DG1_MARK,
- D38_AD6_DG0_MARK,
- D37_AD5_DR5_MARK,
- D36_AD4_DR4_MARK,
- D35_AD3_DR3_MARK,
- D34_AD2_DR2_MARK,
- D33_AD1_DR1_MARK,
- D32_AD0_DR0_MARK,
- REQ1_MARK,
- REQ2_MARK,
- REQ3_MARK,
- GNT1_MARK,
- GNT2_MARK,
- GNT3_MARK,
- MMCCLK_MARK,
- D31_MARK,
- D30_MARK,
- D29_MARK,
- D28_MARK,
- D27_MARK,
- D26_MARK,
- D25_MARK,
- D24_MARK,
- D23_MARK,
- D22_MARK,
- D21_MARK,
- D20_MARK,
- D19_MARK,
- D18_MARK,
- D17_MARK,
- D16_MARK,
- SCIF1_SCK_MARK,
- SCIF1_RXD_MARK,
- SCIF1_TXD_MARK,
- SCIF0_CTS_MARK,
- INTD_MARK,
- FCE_MARK,
- SCIF0_RTS_MARK,
- HSPI_CS_MARK,
- FSE_MARK,
- SCIF0_SCK_MARK,
- HSPI_CLK_MARK,
- FRE_MARK,
- SCIF0_RXD_MARK,
- HSPI_RX_MARK,
- FRB_MARK,
- SCIF0_TXD_MARK,
- HSPI_TX_MARK,
- FWE_MARK,
- SCIF5_TXD_MARK,
- HAC1_SYNC_MARK,
- SSI1_WS_MARK,
- SIOF_TXD_PJ_MARK,
- HAC0_SDOUT_MARK,
- SSI0_SDATA_MARK,
- SIOF_RXD_PJ_MARK,
- HAC0_SDIN_MARK,
- SSI0_SCK_MARK,
- SIOF_SYNC_PJ_MARK,
- HAC0_SYNC_MARK,
- SSI0_WS_MARK,
- SIOF_MCLK_PJ_MARK,
- HAC_RES_MARK,
- SIOF_SCK_PJ_MARK,
- HAC0_BITCLK_MARK,
- SSI0_CLK_MARK,
- HAC1_BITCLK_MARK,
- SSI1_CLK_MARK,
- TCLK_MARK,
- IOIS16_MARK,
- STATUS0_MARK,
- DRAK0_PK3_MARK,
- STATUS1_MARK,
- DRAK1_PK2_MARK,
- DACK2_MARK,
- SCIF2_TXD_MARK,
- MMCCMD_MARK,
- SIOF_TXD_PK_MARK,
- DACK3_MARK,
- SCIF2_SCK_MARK,
- MMCDAT_MARK,
- SIOF_SCK_PK_MARK,
- DREQ0_MARK,
- DREQ1_MARK,
- DRAK0_PK1_MARK,
- DRAK1_PK0_MARK,
- DREQ2_MARK,
- INTB_MARK,
- DREQ3_MARK,
- INTC_MARK,
- DRAK2_MARK,
- CE2A_MARK,
- IRL4_MARK,
- FD4_MARK,
- IRL5_MARK,
- FD5_MARK,
- IRL6_MARK,
- FD6_MARK,
- IRL7_MARK,
- FD7_MARK,
- DRAK3_MARK,
- CE2B_MARK,
- BREQ_BSACK_MARK,
- BACK_BSREQ_MARK,
- SCIF5_RXD_MARK,
- HAC1_SDIN_MARK,
- SSI1_SCK_MARK,
- SCIF5_SCK_MARK,
- HAC1_SDOUT_MARK,
- SSI1_SDATA_MARK,
- SCIF3_TXD_MARK,
- FCLE_MARK,
- SCIF3_RXD_MARK,
- FALE_MARK,
- SCIF3_SCK_MARK,
- FD0_MARK,
- SCIF4_TXD_MARK,
- FD1_MARK,
- SCIF4_RXD_MARK,
- FD2_MARK,
- SCIF4_SCK_MARK,
- FD3_MARK,
- DEVSEL_DCLKOUT_MARK,
- STOP_CDE_MARK,
- LOCK_ODDF_MARK,
- TRDY_DISPL_MARK,
- IRDY_HSYNC_MARK,
- PCIFRAME_VSYNC_MARK,
- INTA_MARK,
- GNT0_GNTIN_MARK,
- REQ0_REQOUT_MARK,
- PERR_MARK,
- SERR_MARK,
- WE7_CBE3_MARK,
- WE6_CBE2_MARK,
- WE5_CBE1_MARK,
- WE4_CBE0_MARK,
- SCIF2_RXD_MARK,
- SIOF_RXD_MARK,
- MRESETOUT_MARK,
- IRQOUT_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
- PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT),
-
- /* PK GPIO */
- PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT),
- PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT),
- PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT),
- PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT),
- PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT),
- PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT),
- PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT),
- PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT),
-
- /* PL GPIO */
- PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT),
- PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT),
- PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT),
- PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT),
- PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT),
- PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT),
- PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT),
- PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT),
-
- /* PM GPIO */
- PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT),
- PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT),
-
- /* PN GPIO */
- PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT),
- PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT),
- PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT),
- PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT),
- PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT),
- PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT),
- PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT),
- PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT),
-
- /* PP GPIO */
- PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT),
- PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT),
- PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT),
- PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT),
- PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT),
- PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT),
-
- /* PQ GPIO */
- PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT),
- PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT),
- PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT),
- PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT),
- PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT),
-
- /* PR GPIO */
- PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT),
- PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT),
- PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT),
- PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D63_AD31_MARK, PA7_FN),
- PINMUX_DATA(D62_AD30_MARK, PA6_FN),
- PINMUX_DATA(D61_AD29_MARK, PA5_FN),
- PINMUX_DATA(D60_AD28_MARK, PA4_FN),
- PINMUX_DATA(D59_AD27_MARK, PA3_FN),
- PINMUX_DATA(D58_AD26_MARK, PA2_FN),
- PINMUX_DATA(D57_AD25_MARK, PA1_FN),
- PINMUX_DATA(D56_AD24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D55_AD23_MARK, PB7_FN),
- PINMUX_DATA(D54_AD22_MARK, PB6_FN),
- PINMUX_DATA(D53_AD21_MARK, PB5_FN),
- PINMUX_DATA(D52_AD20_MARK, PB4_FN),
- PINMUX_DATA(D51_AD19_MARK, PB3_FN),
- PINMUX_DATA(D50_AD18_MARK, PB2_FN),
- PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN),
- PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN),
- PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN),
- PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN),
- PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN),
- PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN),
- PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN),
- PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN),
- PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN),
- PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN),
- PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN),
- PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN),
- PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN),
- PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN),
- PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN),
- PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(REQ1_MARK, PE5_FN),
- PINMUX_DATA(REQ2_MARK, PE4_FN),
- PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN),
- PINMUX_DATA(GNT1_MARK, PE2_FN),
- PINMUX_DATA(GNT2_MARK, PE1_FN),
- PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN),
- PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(D31_MARK, PF7_FN),
- PINMUX_DATA(D30_MARK, PF6_FN),
- PINMUX_DATA(D29_MARK, PF5_FN),
- PINMUX_DATA(D28_MARK, PF4_FN),
- PINMUX_DATA(D27_MARK, PF3_FN),
- PINMUX_DATA(D26_MARK, PF2_FN),
- PINMUX_DATA(D25_MARK, PF1_FN),
- PINMUX_DATA(D24_MARK, PF0_FN),
-
- /* PF FN */
- PINMUX_DATA(D23_MARK, PG7_FN),
- PINMUX_DATA(D22_MARK, PG6_FN),
- PINMUX_DATA(D21_MARK, PG5_FN),
- PINMUX_DATA(D20_MARK, PG4_FN),
- PINMUX_DATA(D19_MARK, PG3_FN),
- PINMUX_DATA(D18_MARK, PG2_FN),
- PINMUX_DATA(D17_MARK, PG1_FN),
- PINMUX_DATA(D16_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN),
- PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN),
- PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN),
- PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN),
- PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN),
- PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN),
- PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN),
- PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN),
- PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN),
- PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN),
- PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN),
-
- /* PK FN */
- PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN),
- PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN),
- PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN),
- PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN),
- PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(DREQ0_MARK, PK3_FN),
- PINMUX_DATA(DREQ1_MARK, PK2_FN),
- PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN),
- PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN),
-
- /* PL FN */
- PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN),
- PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN),
- PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN),
- PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN),
- PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN),
- PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN),
- PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN),
- PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN),
- PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN),
- PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN),
- PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN),
- PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN),
- PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN),
- PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN),
- PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN),
- PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN),
-
- /* PM FN */
- PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN),
- PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN),
-
- /* PN FN */
- PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN),
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN),
- PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN),
- PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN),
- PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN),
- PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN),
-
- /* PP FN */
- PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN),
- PINMUX_DATA(STOP_CDE_MARK, PP4_FN),
- PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN),
- PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN),
- PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN),
- PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN),
-
- /* PQ FN */
- PINMUX_DATA(INTA_MARK, PQ4_FN),
- PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN),
- PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN),
- PINMUX_DATA(PERR_MARK, PQ1_FN),
- PINMUX_DATA(SERR_MARK, PQ0_FN),
-
- /* PR FN */
- PINMUX_DATA(WE7_CBE3_MARK, PR3_FN),
- PINMUX_DATA(WE6_CBE2_MARK, PR2_FN),
- PINMUX_DATA(WE5_CBE1_MARK, PR1_FN),
- PINMUX_DATA(WE4_CBE0_MARK, PR0_FN),
-
- /* MISC FN */
- PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0),
- PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0),
- PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0),
- PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* PK */
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-
- /* PL */
- PINMUX_GPIO(PL7),
- PINMUX_GPIO(PL6),
- PINMUX_GPIO(PL5),
- PINMUX_GPIO(PL4),
- PINMUX_GPIO(PL3),
- PINMUX_GPIO(PL2),
- PINMUX_GPIO(PL1),
- PINMUX_GPIO(PL0),
-
- /* PM */
- PINMUX_GPIO(PM1),
- PINMUX_GPIO(PM0),
-
- /* PN */
- PINMUX_GPIO(PN7),
- PINMUX_GPIO(PN6),
- PINMUX_GPIO(PN5),
- PINMUX_GPIO(PN4),
- PINMUX_GPIO(PN3),
- PINMUX_GPIO(PN2),
- PINMUX_GPIO(PN1),
- PINMUX_GPIO(PN0),
-
- /* PP */
- PINMUX_GPIO(PP5),
- PINMUX_GPIO(PP4),
- PINMUX_GPIO(PP3),
- PINMUX_GPIO(PP2),
- PINMUX_GPIO(PP1),
- PINMUX_GPIO(PP0),
-
- /* PQ */
- PINMUX_GPIO(PQ4),
- PINMUX_GPIO(PQ3),
- PINMUX_GPIO(PQ2),
- PINMUX_GPIO(PQ1),
- PINMUX_GPIO(PQ0),
-
- /* PR */
- PINMUX_GPIO(PR3),
- PINMUX_GPIO(PR2),
- PINMUX_GPIO(PR1),
- PINMUX_GPIO(PR0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D63_AD31),
- GPIO_FN(D62_AD30),
- GPIO_FN(D61_AD29),
- GPIO_FN(D60_AD28),
- GPIO_FN(D59_AD27),
- GPIO_FN(D58_AD26),
- GPIO_FN(D57_AD25),
- GPIO_FN(D56_AD24),
- GPIO_FN(D55_AD23),
- GPIO_FN(D54_AD22),
- GPIO_FN(D53_AD21),
- GPIO_FN(D52_AD20),
- GPIO_FN(D51_AD19),
- GPIO_FN(D50_AD18),
- GPIO_FN(D49_AD17_DB5),
- GPIO_FN(D48_AD16_DB4),
- GPIO_FN(D47_AD15_DB3),
- GPIO_FN(D46_AD14_DB2),
- GPIO_FN(D45_AD13_DB1),
- GPIO_FN(D44_AD12_DB0),
- GPIO_FN(D43_AD11_DG5),
- GPIO_FN(D42_AD10_DG4),
- GPIO_FN(D41_AD9_DG3),
- GPIO_FN(D40_AD8_DG2),
- GPIO_FN(D39_AD7_DG1),
- GPIO_FN(D38_AD6_DG0),
- GPIO_FN(D37_AD5_DR5),
- GPIO_FN(D36_AD4_DR4),
- GPIO_FN(D35_AD3_DR3),
- GPIO_FN(D34_AD2_DR2),
- GPIO_FN(D33_AD1_DR1),
- GPIO_FN(D32_AD0_DR0),
- GPIO_FN(REQ1),
- GPIO_FN(REQ2),
- GPIO_FN(REQ3),
- GPIO_FN(GNT1),
- GPIO_FN(GNT2),
- GPIO_FN(GNT3),
- GPIO_FN(MMCCLK),
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(INTD),
- GPIO_FN(FCE),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(HSPI_CS),
- GPIO_FN(FSE),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(FRE),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(HSPI_RX),
- GPIO_FN(FRB),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(HSPI_TX),
- GPIO_FN(FWE),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SIOF_TXD_PJ),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SIOF_RXD_PJ),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SIOF_SYNC_PJ),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SIOF_MCLK_PJ),
- GPIO_FN(HAC_RES),
- GPIO_FN(SIOF_SCK_PJ),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(TCLK),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS0),
- GPIO_FN(DRAK0_PK3),
- GPIO_FN(STATUS1),
- GPIO_FN(DRAK1_PK2),
- GPIO_FN(DACK2),
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(MMCCMD),
- GPIO_FN(SIOF_TXD_PK),
- GPIO_FN(DACK3),
- GPIO_FN(SCIF2_SCK),
- GPIO_FN(MMCDAT),
- GPIO_FN(SIOF_SCK_PK),
- GPIO_FN(DREQ0),
- GPIO_FN(DREQ1),
- GPIO_FN(DRAK0_PK1),
- GPIO_FN(DRAK1_PK0),
- GPIO_FN(DREQ2),
- GPIO_FN(INTB),
- GPIO_FN(DREQ3),
- GPIO_FN(INTC),
- GPIO_FN(DRAK2),
- GPIO_FN(CE2A),
- GPIO_FN(IRL4),
- GPIO_FN(FD4),
- GPIO_FN(IRL5),
- GPIO_FN(FD5),
- GPIO_FN(IRL6),
- GPIO_FN(FD6),
- GPIO_FN(IRL7),
- GPIO_FN(FD7),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2B),
- GPIO_FN(BREQ_BSACK),
- GPIO_FN(BACK_BSREQ),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(FCLE),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(FALE),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(FD0),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(FD1),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(FD2),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(FD3),
- GPIO_FN(DEVSEL_DCLKOUT),
- GPIO_FN(STOP_CDE),
- GPIO_FN(LOCK_ODDF),
- GPIO_FN(TRDY_DISPL),
- GPIO_FN(IRDY_HSYNC),
- GPIO_FN(PCIFRAME_VSYNC),
- GPIO_FN(INTA),
- GPIO_FN(GNT0_GNTIN),
- GPIO_FN(REQ0_REQOUT),
- GPIO_FN(PERR),
- GPIO_FN(SERR),
- GPIO_FN(WE7_CBE3),
- GPIO_FN(WE6_CBE2),
- GPIO_FN(WE5_CBE1),
- GPIO_FN(WE4_CBE0),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SIOF_RXD),
- GPIO_FN(MRESETOUT),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffe70008, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- PJ0_FN, PJ0_OUT, PJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2, GROUP(
- PK7_FN, PK7_OUT, PK7_IN, 0,
- PK6_FN, PK6_OUT, PK6_IN, 0,
- PK5_FN, PK5_OUT, PK5_IN, 0,
- PK4_FN, PK4_OUT, PK4_IN, 0,
- PK3_FN, PK3_OUT, PK3_IN, 0,
- PK2_FN, PK2_OUT, PK2_IN, 0,
- PK1_FN, PK1_OUT, PK1_IN, 0,
- PK0_FN, PK0_OUT, PK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2, GROUP(
- PL7_FN, PL7_OUT, PL7_IN, 0,
- PL6_FN, PL6_OUT, PL6_IN, 0,
- PL5_FN, PL5_OUT, PL5_IN, 0,
- PL4_FN, PL4_OUT, PL4_IN, 0,
- PL3_FN, PL3_OUT, PL3_IN, 0,
- PL2_FN, PL2_OUT, PL2_IN, 0,
- PL1_FN, PL1_OUT, PL1_IN, 0,
- PL0_FN, PL0_OUT, PL0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PMCR", 0xffe70016, 16,
- GROUP(-12, 2, 2),
- GROUP(
- /* RESERVED [12] */
- PM1_FN, PM1_OUT, PM1_IN, 0,
- PM0_FN, PM0_OUT, PM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2, GROUP(
- PN7_FN, PN7_OUT, PN7_IN, 0,
- PN6_FN, PN6_OUT, PN6_IN, 0,
- PN5_FN, PN5_OUT, PN5_IN, 0,
- PN4_FN, PN4_OUT, PN4_IN, 0,
- PN3_FN, PN3_OUT, PN3_IN, 0,
- PN2_FN, PN2_OUT, PN2_IN, 0,
- PN1_FN, PN1_OUT, PN1_IN, 0,
- PN0_FN, PN0_OUT, PN0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xffe7001a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PP5_FN, PP5_OUT, PP5_IN, 0,
- PP4_FN, PP4_OUT, PP4_IN, 0,
- PP3_FN, PP3_OUT, PP3_IN, 0,
- PP2_FN, PP2_OUT, PP2_IN, 0,
- PP1_FN, PP1_OUT, PP1_IN, 0,
- PP0_FN, PP0_OUT, PP0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xffe7001c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PQ4_FN, PQ4_OUT, PQ4_IN, 0,
- PQ3_FN, PQ3_OUT, PQ3_IN, 0,
- PQ2_FN, PQ2_OUT, PQ2_IN, 0,
- PQ1_FN, PQ1_OUT, PQ1_IN, 0,
- PQ0_FN, PQ0_OUT, PQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xffe7001e, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PR3_FN, PR3_OUT, PR3_IN, 0,
- PR2_FN, PR2_OUT, PR2_IN, 0,
- PR1_FN, PR1_OUT, PR1_IN, 0,
- PR0_FN, PR0_OUT, PR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1, GROUP(
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, 0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG_VAR("P2MSELR", 0xffe70082, 16,
- GROUP(-13, 1, 1, 1),
- GROUP(
- /* RESERVED [13] */
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffe70020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffe70022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffe70024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffe70026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffe70028, 8, GROUP(
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffe7002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffe7002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffe7002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffe70030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffe70032, 8, GROUP(
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffe70034, 8, GROUP(
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffe70036, 8, GROUP(
- 0, 0, 0, 0,
- 0, 0, PM1_DATA, PM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffe70038, 8, GROUP(
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffe7003a, 8, GROUP(
- 0, 0, PP5_DATA, PP4_DATA,
- PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffe7003c, 8, GROUP(
- 0, 0, 0, PQ4_DATA,
- PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffe7003e, 8, GROUP(
- 0, 0, 0, 0,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7785_pinmux_info = {
- .name = "sh7785_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7786.c b/drivers/pinctrl/renesas/pfc-sh7786.c
deleted file mode 100644
index f09f4a76901088..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7786.c
+++ /dev/null
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7786.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
-
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- DCLKIN_MARK, DCLKOUT_MARK, ODDF_MARK,
- VSYNC_MARK, HSYNC_MARK, CDE_MARK, DISP_MARK,
- DR0_MARK, DR1_MARK, DR2_MARK, DR3_MARK, DR4_MARK, DR5_MARK,
- DG0_MARK, DG1_MARK, DG2_MARK, DG3_MARK, DG4_MARK, DG5_MARK,
- DB0_MARK, DB1_MARK, DB2_MARK, DB3_MARK, DB4_MARK, DB5_MARK,
- ETH_MAGIC_MARK, ETH_LINK_MARK, ETH_TX_ER_MARK, ETH_TX_EN_MARK,
- ETH_MDIO_MARK, ETH_RX_CLK_MARK, ETH_MDC_MARK, ETH_COL_MARK,
- ETH_TX_CLK_MARK, ETH_CRS_MARK, ETH_RX_DV_MARK, ETH_RX_ER_MARK,
- ETH_TXD3_MARK, ETH_TXD2_MARK, ETH_TXD1_MARK, ETH_TXD0_MARK,
- ETH_RXD3_MARK, ETH_RXD2_MARK, ETH_RXD1_MARK, ETH_RXD0_MARK,
- HSPI_CLK_MARK, HSPI_CS_MARK, HSPI_RX_MARK, HSPI_TX_MARK,
- SCIF0_CTS_MARK, SCIF0_RTS_MARK,
- SCIF0_SCK_MARK, SCIF0_RXD_MARK, SCIF0_TXD_MARK,
- SCIF1_SCK_MARK, SCIF1_RXD_MARK, SCIF1_TXD_MARK,
- SCIF3_SCK_MARK, SCIF3_RXD_MARK, SCIF3_TXD_MARK,
- SCIF4_SCK_MARK, SCIF4_RXD_MARK, SCIF4_TXD_MARK,
- SCIF5_SCK_MARK, SCIF5_RXD_MARK, SCIF5_TXD_MARK,
- BREQ_MARK, IOIS16_MARK, CE2B_MARK, CE2A_MARK, BACK_MARK,
- FALE_MARK, FRB_MARK, FSTATUS_MARK,
- FSE_MARK, FCLE_MARK,
- DACK0_MARK, DACK1_MARK, DACK2_MARK, DACK3_MARK,
- DREQ0_MARK, DREQ1_MARK, DREQ2_MARK, DREQ3_MARK,
- DRAK0_MARK, DRAK1_MARK, DRAK2_MARK, DRAK3_MARK,
- USB_OVC1_MARK, USB_OVC0_MARK,
- USB_PENC1_MARK, USB_PENC0_MARK,
- HAC_RES_MARK,
- HAC1_SDOUT_MARK, HAC1_SDIN_MARK, HAC1_SYNC_MARK, HAC1_BITCLK_MARK,
- HAC0_SDOUT_MARK, HAC0_SDIN_MARK, HAC0_SYNC_MARK, HAC0_BITCLK_MARK,
- SSI0_SDATA_MARK, SSI0_SCK_MARK, SSI0_WS_MARK, SSI0_CLK_MARK,
- SSI1_SDATA_MARK, SSI1_SCK_MARK, SSI1_WS_MARK, SSI1_CLK_MARK,
- SSI2_SDATA_MARK, SSI2_SCK_MARK, SSI2_WS_MARK,
- SSI3_SDATA_MARK, SSI3_SCK_MARK, SSI3_WS_MARK,
- SDIF1CMD_MARK, SDIF1CD_MARK, SDIF1WP_MARK, SDIF1CLK_MARK,
- SDIF1D3_MARK, SDIF1D2_MARK, SDIF1D1_MARK, SDIF1D0_MARK,
- SDIF0CMD_MARK, SDIF0CD_MARK, SDIF0WP_MARK, SDIF0CLK_MARK,
- SDIF0D3_MARK, SDIF0D2_MARK, SDIF0D1_MARK, SDIF0D0_MARK,
- TCLK_MARK,
- IRL7_MARK, IRL6_MARK, IRL5_MARK, IRL4_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
-
- /* PA FN */
- PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN),
- PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN),
- PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN),
- PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN),
- PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN),
- PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN),
- PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN),
- PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN),
- PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN),
- PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN),
- PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN),
- PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN),
- PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN),
- PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN),
- PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN),
- PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN),
- PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN),
- PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN),
- PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN),
- PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN),
- PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN),
- PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN),
- PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN),
- PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN),
- PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN),
- PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN),
- PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN),
- PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN),
- PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN),
- PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN),
- PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN),
- PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN),
- PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN),
- PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN),
- PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN),
- PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN),
-
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN),
- PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN),
- PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN),
- PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN),
- PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN),
- PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN),
- PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DCLKOUT_MARK, PD7_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PD6_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN),
- PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN),
- PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN),
- PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(USB_PENC1_MARK, PE7_FN),
- PINMUX_DATA(USB_PENC0_MARK, PE6_FN),
-
- /* PF FN */
- PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN),
- PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN),
- PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN),
- PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN),
- PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN),
-
- /* PH FN */
- PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN),
- PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN),
- PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN),
- PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN),
- PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN),
- PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN),
- PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN),
- PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN),
- PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN),
- PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN),
- PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN),
- PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN),
- PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN),
- PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN),
- PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN),
- PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN),
- PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN),
- PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(CDE),
- GPIO_FN(ETH_MAGIC),
- GPIO_FN(DISP),
- GPIO_FN(ETH_LINK),
- GPIO_FN(DR5),
- GPIO_FN(ETH_TX_ER),
- GPIO_FN(DR4),
- GPIO_FN(ETH_TX_EN),
- GPIO_FN(DR3),
- GPIO_FN(ETH_TXD3),
- GPIO_FN(DR2),
- GPIO_FN(ETH_TXD2),
- GPIO_FN(DR1),
- GPIO_FN(ETH_TXD1),
- GPIO_FN(DR0),
- GPIO_FN(ETH_TXD0),
- GPIO_FN(VSYNC),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(ODDF),
- GPIO_FN(HSPI_CS),
- GPIO_FN(DG5),
- GPIO_FN(ETH_MDIO),
- GPIO_FN(DG4),
- GPIO_FN(ETH_RX_CLK),
- GPIO_FN(DG3),
- GPIO_FN(ETH_MDC),
- GPIO_FN(DG2),
- GPIO_FN(ETH_COL),
- GPIO_FN(DG1),
- GPIO_FN(ETH_TX_CLK),
- GPIO_FN(DG0),
- GPIO_FN(ETH_CRS),
- GPIO_FN(DCLKIN),
- GPIO_FN(HSPI_RX),
- GPIO_FN(HSYNC),
- GPIO_FN(HSPI_TX),
- GPIO_FN(DB5),
- GPIO_FN(ETH_RXD3),
- GPIO_FN(DB4),
- GPIO_FN(ETH_RXD2),
- GPIO_FN(DB3),
- GPIO_FN(ETH_RXD1),
- GPIO_FN(DB2),
- GPIO_FN(ETH_RXD0),
- GPIO_FN(DB1),
- GPIO_FN(ETH_RX_DV),
- GPIO_FN(DB0),
- GPIO_FN(ETH_RX_ER),
- GPIO_FN(DCLKOUT),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(DACK1),
- GPIO_FN(BACK),
- GPIO_FN(FALE),
- GPIO_FN(DACK0),
- GPIO_FN(FCLE),
- GPIO_FN(DREQ1),
- GPIO_FN(BREQ),
- GPIO_FN(USB_OVC1),
- GPIO_FN(DREQ0),
- GPIO_FN(USB_OVC0),
- GPIO_FN(USB_PENC1),
- GPIO_FN(USB_PENC0),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SDIF1CMD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SDIF1CD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SDIF1WP),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(SDIF1CLK),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SDIF1D3),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SDIF1D2),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SDIF1D1),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(SDIF1D0),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(SSI2_SDATA),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(TCLK),
- GPIO_FN(SSI2_SCK),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(HAC_RES),
- GPIO_FN(SSI2_WS),
- GPIO_FN(DACK3),
- GPIO_FN(SDIF0CMD),
- GPIO_FN(DACK2),
- GPIO_FN(SDIF0CD),
- GPIO_FN(DREQ3),
- GPIO_FN(SDIF0WP),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(DREQ2),
- GPIO_FN(SDIF0CLK),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(IRL7),
- GPIO_FN(SDIF0D3),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(IRL6),
- GPIO_FN(SDIF0D2),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(IRL5),
- GPIO_FN(SDIF0D1),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(IRL4),
- GPIO_FN(SDIF0D0),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(FRB),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(IOIS16),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(CE2B),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2A),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(DRAK2),
- GPIO_FN(SSI3_WS),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(DRAK1),
- GPIO_FN(SSI3_SDATA),
- GPIO_FN(FSTATUS),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(DRAK0),
- GPIO_FN(SSI3_SCK),
- GPIO_FN(FSE),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffcc0008, 16,
- GROUP(2, 2, -12),
- GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- /* RESERVED [12] */ ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xffcc000c, 16,
- GROUP(2, 2, 2, -10),
- GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- /* RESERVED [10] */ ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1, GROUP(
- 0, 0,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1, GROUP(
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffcc0020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8, GROUP(
- PE7_DATA, PE6_DATA,
- 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, 0,
- 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7786_pinmux_info = {
- .name = "sh7786_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-shx3.c b/drivers/pinctrl/renesas/pfc-shx3.c
deleted file mode 100644
index 96a65d83774f16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-shx3.c
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <cpu/shx3.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
-
- PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
-
- PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
-
- PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN, PE5_FN, PE4_FN,
- PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
-
- PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK, D27_MARK, D26_MARK,
- D25_MARK, D24_MARK, D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
-
- BACK_MARK, BREQ_MARK,
- WE3_MARK, WE2_MARK,
- CS6_MARK, CS5_MARK, CS4_MARK,
- CLKOUTENB_MARK,
-
- DACK3_MARK, DACK2_MARK, DACK1_MARK, DACK0_MARK,
- DREQ3_MARK, DREQ2_MARK, DREQ1_MARK, DREQ0_MARK,
-
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
-
- DRAK3_MARK, DRAK2_MARK, DRAK1_MARK, DRAK0_MARK,
-
- SCK3_MARK, SCK2_MARK, SCK1_MARK, SCK0_MARK,
- IRL3_MARK, IRL2_MARK, IRL1_MARK, IRL0_MARK,
- TXD3_MARK, TXD2_MARK, TXD1_MARK, TXD0_MARK,
- RXD3_MARK, RXD2_MARK, RXD1_MARK, RXD0_MARK,
-
- CE2B_MARK, CE2A_MARK, IOIS16_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- IRQOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D31_MARK, PA7_FN),
- PINMUX_DATA(D30_MARK, PA6_FN),
- PINMUX_DATA(D29_MARK, PA5_FN),
- PINMUX_DATA(D28_MARK, PA4_FN),
- PINMUX_DATA(D27_MARK, PA3_FN),
- PINMUX_DATA(D26_MARK, PA2_FN),
- PINMUX_DATA(D25_MARK, PA1_FN),
- PINMUX_DATA(D24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D23_MARK, PB7_FN),
- PINMUX_DATA(D22_MARK, PB6_FN),
- PINMUX_DATA(D21_MARK, PB5_FN),
- PINMUX_DATA(D20_MARK, PB4_FN),
- PINMUX_DATA(D19_MARK, PB3_FN),
- PINMUX_DATA(D18_MARK, PB2_FN),
- PINMUX_DATA(D17_MARK, PB1_FN),
- PINMUX_DATA(D16_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(BACK_MARK, PC7_FN),
- PINMUX_DATA(BREQ_MARK, PC6_FN),
- PINMUX_DATA(WE3_MARK, PC5_FN),
- PINMUX_DATA(WE2_MARK, PC4_FN),
- PINMUX_DATA(CS6_MARK, PC3_FN),
- PINMUX_DATA(CS5_MARK, PC2_FN),
- PINMUX_DATA(CS4_MARK, PC1_FN),
- PINMUX_DATA(CLKOUTENB_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DACK3_MARK, PD7_FN),
- PINMUX_DATA(DACK2_MARK, PD6_FN),
- PINMUX_DATA(DACK1_MARK, PD5_FN),
- PINMUX_DATA(DACK0_MARK, PD4_FN),
- PINMUX_DATA(DREQ3_MARK, PD3_FN),
- PINMUX_DATA(DREQ2_MARK, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(IRQ3_MARK, PE7_FN),
- PINMUX_DATA(IRQ2_MARK, PE6_FN),
- PINMUX_DATA(IRQ1_MARK, PE5_FN),
- PINMUX_DATA(IRQ0_MARK, PE4_FN),
- PINMUX_DATA(DRAK3_MARK, PE3_FN),
- PINMUX_DATA(DRAK2_MARK, PE2_FN),
- PINMUX_DATA(DRAK1_MARK, PE1_FN),
- PINMUX_DATA(DRAK0_MARK, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(SCK3_MARK, PF7_FN),
- PINMUX_DATA(SCK2_MARK, PF6_FN),
- PINMUX_DATA(SCK1_MARK, PF5_FN),
- PINMUX_DATA(SCK0_MARK, PF4_FN),
- PINMUX_DATA(IRL3_MARK, PF3_FN),
- PINMUX_DATA(IRL2_MARK, PF2_FN),
- PINMUX_DATA(IRL1_MARK, PF1_FN),
- PINMUX_DATA(IRL0_MARK, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(TXD3_MARK, PG7_FN),
- PINMUX_DATA(TXD2_MARK, PG6_FN),
- PINMUX_DATA(TXD1_MARK, PG5_FN),
- PINMUX_DATA(TXD0_MARK, PG4_FN),
- PINMUX_DATA(RXD3_MARK, PG3_FN),
- PINMUX_DATA(RXD2_MARK, PG2_FN),
- PINMUX_DATA(RXD1_MARK, PG1_FN),
- PINMUX_DATA(RXD0_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(CE2B_MARK, PH5_FN),
- PINMUX_DATA(CE2A_MARK, PH4_FN),
- PINMUX_DATA(IOIS16_MARK, PH3_FN),
- PINMUX_DATA(STATUS1_MARK, PH2_FN),
- PINMUX_DATA(STATUS0_MARK, PH1_FN),
- PINMUX_DATA(IRQOUT_MARK, PH0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(BACK),
- GPIO_FN(BREQ),
- GPIO_FN(WE3),
- GPIO_FN(WE2),
- GPIO_FN(CS6),
- GPIO_FN(CS5),
- GPIO_FN(CS4),
- GPIO_FN(CLKOUTENB),
- GPIO_FN(DACK3),
- GPIO_FN(DACK2),
- GPIO_FN(DACK1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ3),
- GPIO_FN(DREQ2),
- GPIO_FN(DREQ1),
- GPIO_FN(DREQ0),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(DRAK3),
- GPIO_FN(DRAK2),
- GPIO_FN(DRAK1),
- GPIO_FN(DRAK0),
- GPIO_FN(SCK3),
- GPIO_FN(SCK2),
- GPIO_FN(SCK1),
- GPIO_FN(SCK0),
- GPIO_FN(IRL3),
- GPIO_FN(IRL2),
- GPIO_FN(IRL1),
- GPIO_FN(IRL0),
- GPIO_FN(TXD3),
- GPIO_FN(TXD2),
- GPIO_FN(TXD1),
- GPIO_FN(TXD0),
- GPIO_FN(RXD3),
- GPIO_FN(RXD2),
- GPIO_FN(RXD1),
- GPIO_FN(RXD0),
- GPIO_FN(CE2B),
- GPIO_FN(CE2A),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PABCR", 0xffc70000, 32, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0,
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PCDCR", 0xffc70004, 32, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0,
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PEFCR", 0xffc70008, 32, 2, GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0,
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PGHCR", 0xffc7000c, 32, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0, ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PABDR", 0xffc70010, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, ))
- },
- { PINMUX_DATA_REG("PCDDR", 0xffc70014, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, ))
- },
- { PINMUX_DATA_REG("PEFDR", 0xffc70018, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, ))
- },
- { PINMUX_DATA_REG("PGHDR", 0xffc7001c, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info shx3_pinmux_info = {
- .name = "shx3_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-};
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 13/22] pinctrl: remove renesas sh controllers
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/pinctrl/renesas/Kconfig | 63 +-
drivers/pinctrl/renesas/Makefile | 27 -
drivers/pinctrl/renesas/core.c | 598 ------
drivers/pinctrl/renesas/pfc-sh7203.c | 1577 --------------
drivers/pinctrl/renesas/pfc-sh7264.c | 2131 -------------------
drivers/pinctrl/renesas/pfc-sh7269.c | 2851 --------------------------
drivers/pinctrl/renesas/pfc-sh7720.c | 1201 -----------
drivers/pinctrl/renesas/pfc-sh7722.c | 1703 ---------------
drivers/pinctrl/renesas/pfc-sh7723.c | 1902 -----------------
drivers/pinctrl/renesas/pfc-sh7724.c | 2177 --------------------
drivers/pinctrl/renesas/pfc-sh7734.c | 2408 ----------------------
drivers/pinctrl/renesas/pfc-sh7757.c | 2219 --------------------
drivers/pinctrl/renesas/pfc-sh7785.c | 1258 ------------
drivers/pinctrl/renesas/pfc-sh7786.c | 809 --------
drivers/pinctrl/renesas/pfc-shx3.c | 557 -----
15 files changed, 2 insertions(+), 21479 deletions(-)
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7203.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7264.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7269.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7720.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7722.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7723.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7724.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7734.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7757.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7785.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7786.c
delete mode 100644 drivers/pinctrl/renesas/pfc-shx3.c
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 0903a0a4183198..fe4475c51920cd 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -6,8 +6,8 @@
menu "Renesas pinctrl drivers"
config PINCTRL_RENESAS
- bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
- default y if ARCH_RENESAS || SUPERH
+ bool "Renesas SoC pin control support" if COMPILE_TEST && ARCH_RENESAS
+ default y if ARCH_RENESAS
select PINCTRL_PFC_EMEV2 if ARCH_EMEV2
select PINCTRL_PFC_R8A73A4 if ARCH_R8A73A4
select PINCTRL_PFC_R8A7740 if ARCH_R8A7740
@@ -41,19 +41,7 @@ config PINCTRL_RENESAS
select PINCTRL_PFC_R8A779G0 if ARCH_R8A779G0
select PINCTRL_RZG2L if ARCH_RZG2L
select PINCTRL_RZV2M if ARCH_R9A09G011
- select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203
- select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264
- select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
select PINCTRL_PFC_SH73A0 if ARCH_SH73A0
- select PINCTRL_PFC_SH7720 if CPU_SUBTYPE_SH7720
- select PINCTRL_PFC_SH7722 if CPU_SUBTYPE_SH7722
- select PINCTRL_PFC_SH7723 if CPU_SUBTYPE_SH7723
- select PINCTRL_PFC_SH7724 if CPU_SUBTYPE_SH7724
- select PINCTRL_PFC_SH7734 if CPU_SUBTYPE_SH7734
- select PINCTRL_PFC_SH7757 if CPU_SUBTYPE_SH7757
- select PINCTRL_PFC_SH7785 if CPU_SUBTYPE_SH7785
- select PINCTRL_PFC_SH7786 if CPU_SUBTYPE_SH7786
- select PINCTRL_PFC_SHX3 if CPU_SUBTYPE_SHX3
help
This enables pin control drivers for Renesas SuperH and ARM platforms
@@ -255,57 +243,10 @@ config PINCTRL_RZV2M
This selects GPIO and pinctrl driver for Renesas RZ/V2M
platforms.
-config PINCTRL_PFC_SH7203
- bool "pin control support for SH7203" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7264
- bool "pin control support for SH7264" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7269
- bool "pin control support for SH7269" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7720
- bool "pin control support for SH7720" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7722
- bool "pin control support for SH7722" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7734
- bool "pin control support for SH7734" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7757
- bool "pin control support for SH7757" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7785
- bool "pin control support for SH7785" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7786
- bool "pin control support for SH7786" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH73A0
bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
select REGULATOR
-config PINCTRL_PFC_SH7723
- bool "pin control support for SH-Mobile R2" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7724
- bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SHX3
- bool "pin control support for SH-X3" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
endmenu
diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile
index 558b30ce0dec98..115f6565948c7d 100644
--- a/drivers/pinctrl/renesas/Makefile
+++ b/drivers/pinctrl/renesas/Makefile
@@ -32,37 +32,10 @@ obj-$(CONFIG_PINCTRL_PFC_R8A77995) += pfc-r8a77995.o
obj-$(CONFIG_PINCTRL_PFC_R8A779A0) += pfc-r8a779a0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779F0) += pfc-r8a779f0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779G0) += pfc-r8a779g0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o
-obj-$(CONFIG_PINCTRL_PFC_SH7264) += pfc-sh7264.o
-obj-$(CONFIG_PINCTRL_PFC_SH7269) += pfc-sh7269.o
obj-$(CONFIG_PINCTRL_PFC_SH73A0) += pfc-sh73a0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7720) += pfc-sh7720.o
-obj-$(CONFIG_PINCTRL_PFC_SH7722) += pfc-sh7722.o
-obj-$(CONFIG_PINCTRL_PFC_SH7723) += pfc-sh7723.o
-obj-$(CONFIG_PINCTRL_PFC_SH7724) += pfc-sh7724.o
-obj-$(CONFIG_PINCTRL_PFC_SH7734) += pfc-sh7734.o
-obj-$(CONFIG_PINCTRL_PFC_SH7757) += pfc-sh7757.o
-obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o
-obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o
-obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o
obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
obj-$(CONFIG_PINCTRL_RZG2L) += pinctrl-rzg2l.o
obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
obj-$(CONFIG_PINCTRL_RZV2M) += pinctrl-rzv2m.o
-
-ifeq ($(CONFIG_COMPILE_TEST),y)
-CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7269.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7720.o += -I$(srctree)/arch/sh/include/cpu-sh3
-CFLAGS_pfc-sh7722.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7723.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7724.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7734.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7757.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7785.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7786.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-shx3.o += -I$(srctree)/arch/sh/include/cpu-sh4
-endif
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index c91102d3f1d155..47f2cc786cbb76 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
-#ifdef DEBUG
-#define SH_PFC_MAX_REGS 300
-#define SH_PFC_MAX_ENUMS 5000
-
-static unsigned int sh_pfc_errors __initdata;
-static unsigned int sh_pfc_warnings __initdata;
-static bool sh_pfc_bias_done __initdata;
-static bool sh_pfc_drive_done __initdata;
-static bool sh_pfc_power_done __initdata;
-static struct {
- u32 reg;
- u32 bits;
-} *sh_pfc_regs __initdata;
-static u32 sh_pfc_num_regs __initdata;
-static u16 *sh_pfc_enums __initdata;
-static u32 sh_pfc_num_enums __initdata;
-
-#define sh_pfc_err(fmt, ...) \
- do { \
- pr_err("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_errors++; \
- } while (0)
-
-#define sh_pfc_err_once(type, fmt, ...) \
- do { \
- if (!sh_pfc_ ## type ## _done) { \
- sh_pfc_ ## type ## _done = true; \
- sh_pfc_err(fmt, ##__VA_ARGS__); \
- } \
- } while (0)
-
-#define sh_pfc_warn(fmt, ...) \
- do { \
- pr_warn("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_warnings++; \
- } while (0)
-
-static bool __init is0s(const u16 *enum_ids, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++)
- if (enum_ids[i])
- return false;
-
- return true;
-}
-
-static bool __init same_name(const char *a, const char *b)
-{
- return a && b && !strcmp(a, b);
-}
-
-static void __init sh_pfc_check_reg(const char *drvname, u32 reg, u32 bits)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_regs; i++) {
- if (reg != sh_pfc_regs[i].reg)
- continue;
-
- if (bits & sh_pfc_regs[i].bits)
- sh_pfc_err("reg 0x%x: bits 0x%x conflict\n", reg,
- bits & sh_pfc_regs[i].bits);
-
- sh_pfc_regs[i].bits |= bits;
- return;
- }
-
- if (sh_pfc_num_regs == SH_PFC_MAX_REGS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_REGS\n", drvname);
- return;
- }
-
- sh_pfc_regs[sh_pfc_num_regs].reg = reg;
- sh_pfc_regs[sh_pfc_num_regs].bits = bits;
- sh_pfc_num_regs++;
-}
-
-static int __init sh_pfc_check_enum(const char *drvname, u16 enum_id)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_enums; i++) {
- if (enum_id == sh_pfc_enums[i])
- return -EINVAL;
- }
-
- if (sh_pfc_num_enums == SH_PFC_MAX_ENUMS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_ENUMS\n", drvname);
- return 0;
- }
-
- sh_pfc_enums[sh_pfc_num_enums++] = enum_id;
- return 0;
-}
-
-static void __init sh_pfc_check_reg_enums(const char *drvname, u32 reg,
- const u16 *enums, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++) {
- if (enums[i] && sh_pfc_check_enum(drvname, enums[i]))
- sh_pfc_err("reg 0x%x enum_id %u conflict\n", reg,
- enums[i]);
- }
-}
-
-static const struct sh_pfc_pin __init *sh_pfc_find_pin(
- const struct sh_pfc_soc_info *info, u32 reg, unsigned int pin)
-{
- const char *drvname = info->name;
- unsigned int i;
-
- if (pin == SH_PFC_PIN_NONE)
- return NULL;
-
- for (i = 0; i < info->nr_pins; i++) {
- if (pin == info->pins[i].pin)
- return &info->pins[i];
- }
-
- sh_pfc_err("reg 0x%x: pin %u not found\n", reg, pin);
- return NULL;
-}
-
-static void __init sh_pfc_check_cfg_reg(const char *drvname,
- const struct pinmux_cfg_reg *cfg_reg)
-{
- unsigned int i, n, rw, r;
- int fw;
-
- sh_pfc_check_reg(drvname, cfg_reg->reg,
- GENMASK(cfg_reg->reg_width - 1, 0));
-
- if (cfg_reg->field_width) {
- fw = cfg_reg->field_width;
- n = (cfg_reg->reg_width / fw) << fw;
- for (i = 0, r = 0; i < n; i += 1 << fw) {
- if (is0s(&cfg_reg->enum_ids[i], 1 << fw))
- r++;
- }
-
- if ((r << fw) * sizeof(u16) > cfg_reg->reg_width / fw)
- sh_pfc_warn("reg 0x%x can be described with variable-width reserved fields\n",
- cfg_reg->reg);
-
- /* Skip field checks (done at build time) */
- goto check_enum_ids;
- }
-
- for (i = 0, n = 0, rw = 0; (fw = cfg_reg->var_field_width[i]); i++) {
- if (fw < 0) {
- rw += -fw;
- } else {
- if (is0s(&cfg_reg->enum_ids[n], 1 << fw))
- sh_pfc_warn("reg 0x%x: field [%u:%u] can be described as reserved\n",
- cfg_reg->reg, rw, rw + fw - 1);
- n += 1 << fw;
- rw += fw;
- }
- }
-
- if (rw != cfg_reg->reg_width)
- sh_pfc_err("reg 0x%x: var_field_width declares %u instead of %u bits\n",
- cfg_reg->reg, rw, cfg_reg->reg_width);
-
- if (n != cfg_reg->nr_enum_ids)
- sh_pfc_err("reg 0x%x: enum_ids[] has %u instead of %u values\n",
- cfg_reg->reg, cfg_reg->nr_enum_ids, n);
-
-check_enum_ids:
- sh_pfc_check_reg_enums(drvname, cfg_reg->reg, cfg_reg->enum_ids, n);
-}
-
-static void __init sh_pfc_check_drive_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_drive_reg *drive)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(drive->fields); i++) {
- const struct pinmux_drive_reg_field *field = &drive->fields[i];
-
- if (!field->pin && !field->offset && !field->size)
- continue;
-
- sh_pfc_check_reg(info->name, drive->reg,
- GENMASK(field->offset + field->size - 1,
- field->offset));
-
- pin = sh_pfc_find_pin(info, drive->reg, field->pin);
- if (pin && !(pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH))
- sh_pfc_err("drive_reg 0x%x: field %u: pin %s lacks SH_PFC_PIN_CFG_DRIVE_STRENGTH flag\n",
- drive->reg, i, pin->name);
- }
-}
-
-static void __init sh_pfc_check_bias_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_bias_reg *bias)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
- u32 bits;
-
- for (i = 0, bits = 0; i < ARRAY_SIZE(bias->pins); i++)
- if (bias->pins[i] != SH_PFC_PIN_NONE)
- bits |= BIT(i);
-
- if (bias->puen)
- sh_pfc_check_reg(info->name, bias->puen, bits);
- if (bias->pud)
- sh_pfc_check_reg(info->name, bias->pud, bits);
- for (i = 0; i < ARRAY_SIZE(bias->pins); i++) {
- pin = sh_pfc_find_pin(info, bias->puen, bias->pins[i]);
- if (!pin)
- continue;
-
- if (bias->puen && bias->pud) {
- /*
- * Pull-enable and pull-up/down control registers
- * As some SoCs have pins that support only pull-up
- * or pull-down, we just check for one of them
- */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks one or more SH_PFC_PIN_CFG_PULL_* flags\n",
- bias->puen, i, pin->name);
- } else if (bias->puen) {
- /* Pull-up control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_UP flag\n",
- bias->puen, i, pin->name);
- } else if (bias->pud) {
- /* Pull-down control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_DOWN flag\n",
- bias->pud, i, pin->name);
- }
- }
-}
-
-static void __init sh_pfc_compare_groups(const char *drvname,
- const struct sh_pfc_pin_group *a,
- const struct sh_pfc_pin_group *b)
-{
- unsigned int i;
- size_t len;
-
- if (same_name(a->name, b->name))
- sh_pfc_err("group %s: name conflict\n", a->name);
-
- if (a->nr_pins > b->nr_pins)
- swap(a, b);
-
- len = a->nr_pins * sizeof(a->pins[0]);
- for (i = 0; i <= b->nr_pins - a->nr_pins; i++) {
- if (a->pins == b->pins + i || a->mux == b->mux + i ||
- memcmp(a->pins, b->pins + i, len) ||
- memcmp(a->mux, b->mux + i, len))
- continue;
-
- if (a->nr_pins == b->nr_pins)
- sh_pfc_warn("group %s can be an alias for %s\n",
- a->name, b->name);
- else
- sh_pfc_warn("group %s is a subset of %s\n", a->name,
- b->name);
- }
-}
-
-static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
-{
- const struct pinmux_drive_reg *drive_regs = info->drive_regs;
-#define drive_nfields ARRAY_SIZE(drive_regs->fields)
-#define drive_ofs(i) drive_regs[(i) / drive_nfields]
-#define drive_reg(i) drive_ofs(i).reg
-#define drive_bit(i) ((i) % drive_nfields)
-#define drive_field(i) drive_ofs(i).fields[drive_bit(i)]
- const struct pinmux_bias_reg *bias_regs = info->bias_regs;
-#define bias_npins ARRAY_SIZE(bias_regs->pins)
-#define bias_ofs(i) bias_regs[(i) / bias_npins]
-#define bias_puen(i) bias_ofs(i).puen
-#define bias_pud(i) bias_ofs(i).pud
-#define bias_bit(i) ((i) % bias_npins)
-#define bias_pin(i) bias_ofs(i).pins[bias_bit(i)]
- const char *drvname = info->name;
- unsigned int *refcnts;
- unsigned int i, j, k;
-
- pr_info("sh_pfc: Checking %s\n", drvname);
- sh_pfc_num_regs = 0;
- sh_pfc_num_enums = 0;
- sh_pfc_bias_done = false;
- sh_pfc_drive_done = false;
- sh_pfc_power_done = false;
-
- /* Check pins */
- for (i = 0; i < info->nr_pins; i++) {
- const struct sh_pfc_pin *pin = &info->pins[i];
- unsigned int x;
-
- if (!pin->name) {
- sh_pfc_err("empty pin %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- const struct sh_pfc_pin *pin2 = &info->pins[j];
-
- if (same_name(pin->name, pin2->name))
- sh_pfc_err("pin %s: name conflict\n",
- pin->name);
-
- if (pin->pin != (u16)-1 && pin->pin == pin2->pin)
- sh_pfc_err("pin %s/%s: pin %u conflict\n",
- pin->name, pin2->name, pin->pin);
-
- if (pin->enum_id && pin->enum_id == pin2->enum_id)
- sh_pfc_err("pin %s/%s: enum_id %u conflict\n",
- pin->name, pin2->name,
- pin->enum_id);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) {
- if (!info->ops || !info->ops->get_bias ||
- !info->ops->set_bias)
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_* flag set but .[gs]et_bias() not implemented\n");
-
- if (!bias_regs &&
- (!info->ops || !info->ops->pin_to_portcr))
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_UP flag set but no bias_regs defined and .pin_to_portcr() not implemented\n");
- }
-
- if ((pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) && bias_regs) {
- const struct pinmux_bias_reg *bias_reg =
- rcar_pin_to_bias_reg(info, pin->pin, &x);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_UP) &&
- !bias_reg->puen))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_UP flag set but pin not in bias_regs\n",
- pin->name);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_DOWN) &&
- !bias_reg->pud))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_DOWN flag set but pin not in bias_regs\n",
- pin->name);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH) {
- if (!drive_regs) {
- sh_pfc_err_once(drive, "SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but drive_regs missing\n");
- } else {
- for (j = 0; drive_reg(j); j++) {
- if (!drive_field(j).pin &&
- !drive_field(j).offset &&
- !drive_field(j).size)
- continue;
-
- if (drive_field(j).pin == pin->pin)
- break;
- }
-
- if (!drive_reg(j))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but not in drive_regs\n",
- pin->name);
- }
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_IO_VOLTAGE) {
- if (!info->ops || !info->ops->pin_to_pocctrl)
- sh_pfc_err_once(power, "SH_PFC_PIN_CFG_IO_VOLTAGE flag set but .pin_to_pocctrl() not implemented\n");
- else if (info->ops->pin_to_pocctrl(pin->pin, &x) < 0)
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE set but invalid pin_to_pocctrl()\n",
- pin->name);
- } else if (info->ops && info->ops->pin_to_pocctrl &&
- info->ops->pin_to_pocctrl(pin->pin, &x) >= 0) {
- sh_pfc_warn("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE not set but valid pin_to_pocctrl()\n",
- pin->name);
- }
- }
-
- /* Check groups and functions */
- refcnts = kcalloc(info->nr_groups, sizeof(*refcnts), GFP_KERNEL);
- if (!refcnts)
- return;
-
- for (i = 0; i < info->nr_functions; i++) {
- const struct sh_pfc_function *func = &info->functions[i];
-
- if (!func->name) {
- sh_pfc_err("empty function %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->functions[j].name))
- sh_pfc_err("function %s: name conflict\n",
- func->name);
- }
- for (j = 0; j < func->nr_groups; j++) {
- for (k = 0; k < info->nr_groups; k++) {
- if (same_name(func->groups[j],
- info->groups[k].name)) {
- refcnts[k]++;
- break;
- }
- }
-
- if (k == info->nr_groups)
- sh_pfc_err("function %s: group %s not found\n",
- func->name, func->groups[j]);
- }
- }
-
- for (i = 0; i < info->nr_groups; i++) {
- const struct sh_pfc_pin_group *group = &info->groups[i];
-
- if (!group->name) {
- sh_pfc_err("empty group %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++)
- sh_pfc_compare_groups(drvname, group, &info->groups[j]);
-
- if (!refcnts[i])
- sh_pfc_err("orphan group %s\n", group->name);
- else if (refcnts[i] > 1)
- sh_pfc_warn("group %s referenced by %u functions\n",
- group->name, refcnts[i]);
- }
-
- kfree(refcnts);
-
- /* Check config register descriptions */
- for (i = 0; info->cfg_regs && info->cfg_regs[i].reg; i++)
- sh_pfc_check_cfg_reg(drvname, &info->cfg_regs[i]);
-
- /* Check drive strength registers */
- for (i = 0; drive_regs && drive_regs[i].reg; i++)
- sh_pfc_check_drive_reg(info, &drive_regs[i]);
-
- for (i = 0; drive_regs && drive_reg(i); i++) {
- if (!drive_field(i).pin && !drive_field(i).offset &&
- !drive_field(i).size)
- continue;
-
- for (j = 0; j < i; j++) {
- if (drive_field(i).pin == drive_field(j).pin &&
- drive_field(j).offset && drive_field(j).size) {
- sh_pfc_err("drive_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- drive_reg(i), drive_bit(i),
- drive_reg(j), drive_bit(j));
- }
- }
- }
-
- /* Check bias registers */
- for (i = 0; bias_regs && (bias_regs[i].puen || bias_regs[i].pud); i++)
- sh_pfc_check_bias_reg(info, &bias_regs[i]);
-
- for (i = 0; bias_regs && (bias_puen(i) || bias_pud(i)); i++) {
- if (bias_pin(i) == SH_PFC_PIN_NONE)
- continue;
-
- for (j = 0; j < i; j++) {
- if (bias_pin(i) != bias_pin(j))
- continue;
-
- if (bias_puen(i) && bias_puen(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_puen(i), bias_bit(i),
- bias_puen(j), bias_bit(j));
- if (bias_pud(i) && bias_pud(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_pud(i), bias_bit(i),
- bias_pud(j), bias_bit(j));
- }
- }
-
- /* Check ioctrl registers */
- for (i = 0; info->ioctrl_regs && info->ioctrl_regs[i].reg; i++)
- sh_pfc_check_reg(drvname, info->ioctrl_regs[i].reg, U32_MAX);
-
- /* Check data registers */
- for (i = 0; info->data_regs && info->data_regs[i].reg; i++) {
- sh_pfc_check_reg(drvname, info->data_regs[i].reg,
- GENMASK(info->data_regs[i].reg_width - 1, 0));
- sh_pfc_check_reg_enums(drvname, info->data_regs[i].reg,
- info->data_regs[i].enum_ids,
- info->data_regs[i].reg_width);
- }
-
-#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
- /* Check function GPIOs */
- for (i = 0; i < info->nr_func_gpios; i++) {
- const struct pinmux_func *func = &info->func_gpios[i];
-
- if (!func->name) {
- sh_pfc_err("empty function gpio %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->func_gpios[j].name))
- sh_pfc_err("func_gpio %s: name conflict\n",
- func->name);
- }
- if (sh_pfc_check_enum(drvname, func->enum_id))
- sh_pfc_err("%s enum_id %u conflict\n", func->name,
- func->enum_id);
- }
-#endif
-}
-
-static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
-{
- unsigned int i;
-
- if (!IS_ENABLED(CONFIG_SUPERH) &&
- !of_find_matching_node(NULL, pdrv->driver.of_match_table))
- return;
-
- sh_pfc_regs = kcalloc(SH_PFC_MAX_REGS, sizeof(*sh_pfc_regs),
- GFP_KERNEL);
- if (!sh_pfc_regs)
- return;
-
- sh_pfc_enums = kcalloc(SH_PFC_MAX_ENUMS, sizeof(*sh_pfc_enums),
- GFP_KERNEL);
- if (!sh_pfc_enums)
- goto free_regs;
-
- pr_warn("sh_pfc: Checking builtin pinmux tables\n");
-
- for (i = 0; pdrv->id_table[i].name[0]; i++)
- sh_pfc_check_info((void *)pdrv->id_table[i].driver_data);
-
-#ifdef CONFIG_OF
- for (i = 0; pdrv->driver.of_match_table[i].compatible[0]; i++)
- sh_pfc_check_info(pdrv->driver.of_match_table[i].data);
-#endif
-
- pr_warn("sh_pfc: Detected %u errors and %u warnings\n", sh_pfc_errors,
- sh_pfc_warnings);
-
- kfree(sh_pfc_enums);
-free_regs:
- kfree(sh_pfc_regs);
-}
-
-#else /* !DEBUG */
-static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {}
-#endif /* !DEBUG */
-
#ifdef CONFIG_OF
static const void *sh_pfc_quirk_match(void)
{
@@ -1409,49 +853,8 @@ static int sh_pfc_probe(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id sh_pfc_id_table[] = {
-#ifdef CONFIG_PINCTRL_PFC_SH7203
- { "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7264
- { "pfc-sh7264", (kernel_ulong_t)&sh7264_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7269
- { "pfc-sh7269", (kernel_ulong_t)&sh7269_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7720
- { "pfc-sh7720", (kernel_ulong_t)&sh7720_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7722
- { "pfc-sh7722", (kernel_ulong_t)&sh7722_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7723
- { "pfc-sh7723", (kernel_ulong_t)&sh7723_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7724
- { "pfc-sh7724", (kernel_ulong_t)&sh7724_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7734
- { "pfc-sh7734", (kernel_ulong_t)&sh7734_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7757
- { "pfc-sh7757", (kernel_ulong_t)&sh7757_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7785
- { "pfc-sh7785", (kernel_ulong_t)&sh7785_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7786
- { "pfc-sh7786", (kernel_ulong_t)&sh7786_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SHX3
- { "pfc-shx3", (kernel_ulong_t)&shx3_pinmux_info },
-#endif
- { },
-};
-
static struct platform_driver sh_pfc_driver = {
.probe = sh_pfc_probe,
- .id_table = sh_pfc_id_table,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(sh_pfc_of_table),
@@ -1461,7 +864,6 @@ static struct platform_driver sh_pfc_driver = {
static int __init sh_pfc_init(void)
{
- sh_pfc_check_driver(&sh_pfc_driver);
return platform_driver_register(&sh_pfc_driver);
}
postcore_initcall(sh_pfc_init);
diff --git a/drivers/pinctrl/renesas/pfc-sh7203.c b/drivers/pinctrl/renesas/pfc-sh7203.c
deleted file mode 100644
index 19735746b1bb21..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7203.c
+++ /dev/null
@@ -1,1577 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7203.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PC14_IN, PC13_IN, PC12_IN,
- PC11_IN, PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE15_IN, PE14_IN, PE13_IN, PE12_IN,
- PE11_IN, PE10_IN, PE9_IN, PE8_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF30_IN, PF29_IN, PF28_IN,
- PF27_IN, PF26_IN, PF25_IN, PF24_IN,
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PC14_OUT, PC13_OUT, PC12_OUT,
- PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE15_OUT, PE14_OUT, PE13_OUT, PE12_OUT,
- PE11_OUT, PE10_OUT, PE9_OUT, PE8_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF30_OUT, PF29_OUT, PF28_OUT,
- PF27_OUT, PF26_OUT, PF25_OUT, PF24_OUT,
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_0, PB11MD_1,
- PB10MD_0, PB10MD_1,
- PB9MD_00, PB9MD_01, PB9MD_10,
- PB8MD_00, PB8MD_01, PB8MD_10,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
-
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10,
-
- PC14MD_0, PC14MD_1,
- PC13MD_0, PC13MD_1,
- PC12MD_0, PC12MD_1,
- PC11MD_00, PC11MD_01, PC11MD_10,
- PC10MD_00, PC10MD_01, PC10MD_10,
- PC9MD_0, PC9MD_1,
- PC8MD_0, PC8MD_1,
- PC7MD_0, PC7MD_1,
- PC6MD_0, PC6MD_1,
- PC5MD_0, PC5MD_1,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_00, PC0MD_01, PC0MD_10,
-
- PD15MD_000, PD15MD_001, PD15MD_010, PD15MD_100, PD15MD_101,
- PD14MD_000, PD14MD_001, PD14MD_010, PD14MD_101,
- PD13MD_000, PD13MD_001, PD13MD_010, PD13MD_100, PD13MD_101,
- PD12MD_000, PD12MD_001, PD12MD_010, PD12MD_100, PD12MD_101,
- PD11MD_000, PD11MD_001, PD11MD_010, PD11MD_100, PD11MD_101,
- PD10MD_000, PD10MD_001, PD10MD_010, PD10MD_100, PD10MD_101,
- PD9MD_000, PD9MD_001, PD9MD_010, PD9MD_100, PD9MD_101,
- PD8MD_000, PD8MD_001, PD8MD_010, PD8MD_100, PD8MD_101,
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011, PD7MD_100, PD7MD_101,
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011, PD6MD_100, PD6MD_101,
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011, PD5MD_100, PD5MD_101,
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011, PD4MD_100, PD4MD_101,
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011, PD3MD_100, PD3MD_101,
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011, PD2MD_100, PD2MD_101,
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011, PD1MD_100, PD1MD_101,
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011, PD0MD_100, PD0MD_101,
-
- PE15MD_00, PE15MD_01, PE15MD_11,
- PE14MD_00, PE14MD_01, PE14MD_11,
- PE13MD_00, PE13MD_11,
- PE12MD_00, PE12MD_11,
- PE11MD_000, PE11MD_001, PE11MD_010, PE11MD_100,
- PE10MD_000, PE10MD_001, PE10MD_010, PE10MD_100,
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011, PE7MD_100,
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011, PE6MD_100,
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011, PE5MD_100,
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011, PE4MD_100,
- PE3MD_00, PE3MD_01, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_11,
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- PE0MD_000, PE0MD_001, PE0MD_011, PE0MD_100,
-
- PF30MD_0, PF30MD_1,
- PF29MD_0, PF29MD_1,
- PF28MD_0, PF28MD_1,
- PF27MD_0, PF27MD_1,
- PF26MD_0, PF26MD_1,
- PF25MD_0, PF25MD_1,
- PF24MD_0, PF24MD_1,
- PF23MD_00, PF23MD_01, PF23MD_10,
- PF22MD_00, PF22MD_01, PF22MD_10,
- PF21MD_00, PF21MD_01, PF21MD_10,
- PF20MD_00, PF20MD_01, PF20MD_10,
- PF19MD_00, PF19MD_01, PF19MD_10,
- PF18MD_00, PF18MD_01, PF18MD_10,
- PF17MD_00, PF17MD_01, PF17MD_10,
- PF16MD_00, PF16MD_01, PF16MD_10,
- PF15MD_00, PF15MD_01, PF15MD_10,
- PF14MD_00, PF14MD_01, PF14MD_10,
- PF13MD_00, PF13MD_01, PF13MD_10,
- PF12MD_00, PF12MD_01, PF12MD_10,
- PF11MD_00, PF11MD_01, PF11MD_10,
- PF10MD_00, PF10MD_01, PF10MD_10,
- PF9MD_00, PF9MD_01, PF9MD_10,
- PF8MD_00, PF8MD_01, PF8MD_10,
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- PINT7_PB_MARK, PINT6_PB_MARK, PINT5_PB_MARK, PINT4_PB_MARK,
- PINT3_PB_MARK, PINT2_PB_MARK, PINT1_PB_MARK, PINT0_PB_MARK,
- PINT7_PD_MARK, PINT6_PD_MARK, PINT5_PD_MARK, PINT4_PD_MARK,
- PINT3_PD_MARK, PINT2_PD_MARK, PINT1_PD_MARK, PINT0_PD_MARK,
- IRQ7_PB_MARK, IRQ6_PB_MARK, IRQ5_PB_MARK, IRQ4_PB_MARK,
- IRQ3_PB_MARK, IRQ2_PB_MARK, IRQ1_PB_MARK, IRQ0_PB_MARK,
- IRQ7_PD_MARK, IRQ6_PD_MARK, IRQ5_PD_MARK, IRQ4_PD_MARK,
- IRQ3_PD_MARK, IRQ2_PD_MARK, IRQ1_PD_MARK, IRQ0_PD_MARK,
- IRQ7_PE_MARK, IRQ6_PE_MARK, IRQ5_PE_MARK, IRQ4_PE_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
- WDTOVF_MARK, IRQOUT_MARK, REFOUT_MARK, IRQOUT_REFOUT_MARK,
- UBCTRG_MARK,
- CTX1_MARK, CRX1_MARK, CTX0_MARK, CTX0_CTX1_MARK,
- CRX0_MARK, CRX0_CRX1_MARK,
- SDA3_MARK, SCL3_MARK,
- SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK,
- SDA0_MARK, SCL0_MARK,
- TEND0_PD_MARK, TEND0_PE_MARK, DACK0_PD_MARK, DACK0_PE_MARK,
- DREQ0_PD_MARK, DREQ0_PE_MARK, TEND1_PD_MARK, TEND1_PE_MARK,
- DACK1_PD_MARK, DACK1_PE_MARK, DREQ1_PD_MARK, DREQ1_PE_MARK,
- DACK2_MARK, DREQ2_MARK, DACK3_MARK, DREQ3_MARK,
- ADTRG_PD_MARK, ADTRG_PE_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, CS4_MARK, MRES_MARK, BS_MARK,
- IOIS16_MARK, CS1_MARK, CS6_CE1B_MARK, CE2B_MARK,
- CS5_CE1A_MARK, CE2A_MARK, FRAME_MARK, WAIT_MARK,
- RDWR_MARK, CKE_MARK, CASU_MARK, BREQ_MARK,
- RASU_MARK, BACK_MARK, CASL_MARK, RASL_MARK,
- WE3_DQMUU_AH_ICIO_WR_MARK, WE2_DQMUL_ICIORD_MARK,
- WE1_DQMLU_WE_MARK, WE0_DQMLL_MARK,
- CS3_MARK, CS2_MARK, A1_MARK, A0_MARK, CS7_MARK,
- TIOC4D_MARK, TIOC4C_MARK, TIOC4B_MARK, TIOC4A_MARK,
- TIOC3D_MARK, TIOC3C_MARK, TIOC3B_MARK, TIOC3A_MARK,
- TIOC2B_MARK, TIOC1B_MARK, TIOC2A_MARK, TIOC1A_MARK,
- TIOC0D_MARK, TIOC0C_MARK, TIOC0B_MARK, TIOC0A_MARK,
- TCLKD_PD_MARK, TCLKC_PD_MARK, TCLKB_PD_MARK, TCLKA_PD_MARK,
- TCLKD_PF_MARK, TCLKC_PF_MARK, TCLKB_PF_MARK, TCLKA_PF_MARK,
- SCS0_PD_MARK, SSO0_PD_MARK, SSI0_PD_MARK, SSCK0_PD_MARK,
- SCS0_PF_MARK, SSO0_PF_MARK, SSI0_PF_MARK, SSCK0_PF_MARK,
- SCS1_PD_MARK, SSO1_PD_MARK, SSI1_PD_MARK, SSCK1_PD_MARK,
- SCS1_PF_MARK, SSO1_PF_MARK, SSI1_PF_MARK, SSCK1_PF_MARK,
- TXD0_MARK, RXD0_MARK, SCK0_MARK,
- TXD1_MARK, RXD1_MARK, SCK1_MARK,
- TXD2_MARK, RXD2_MARK, SCK2_MARK,
- RTS3_MARK, CTS3_MARK, TXD3_MARK,
- RXD3_MARK, SCK3_MARK,
- AUDIO_CLK_MARK,
- SSIDATA3_MARK, SSIWS3_MARK, SSISCK3_MARK,
- SSIDATA2_MARK, SSIWS2_MARK, SSISCK2_MARK,
- SSIDATA1_MARK, SSIWS1_MARK, SSISCK1_MARK,
- SSIDATA0_MARK, SSIWS0_MARK, SSISCK0_MARK,
- FCE_MARK, FRB_MARK,
- NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK,
- FSC_MARK, FOE_MARK, FCDE_MARK, FWE_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK, LCD_CLK_MARK, LCD_FLM_MARK,
- LCD_M_DISP_MARK, LCD_CL2_MARK, LCD_CL1_MARK, LCD_DON_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA */
- PINMUX_DATA(PA7_DATA, PA7_IN),
- PINMUX_DATA(PA6_DATA, PA6_IN),
- PINMUX_DATA(PA5_DATA, PA5_IN),
- PINMUX_DATA(PA4_DATA, PA4_IN),
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* PB */
- PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
- PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
- PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
- PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
- PINMUX_DATA(IRQOUT_REFOUT_MARK, PB12MD_10, PB12IRQ_10),
- PINMUX_DATA(UBCTRG_MARK, PB12MD_11),
-
- PINMUX_DATA(PB11_DATA, PB11MD_0, PB11_IN, PB11_OUT),
- PINMUX_DATA(CTX1_MARK, PB11MD_1),
-
- PINMUX_DATA(PB10_DATA, PB10MD_0, PB10_IN, PB10_OUT),
- PINMUX_DATA(CRX1_MARK, PB10MD_1),
-
- PINMUX_DATA(PB9_DATA, PB9MD_00, PB9_IN, PB9_OUT),
- PINMUX_DATA(CTX0_MARK, PB9MD_01),
- PINMUX_DATA(CTX0_CTX1_MARK, PB9MD_10),
-
- PINMUX_DATA(PB8_DATA, PB8MD_00, PB8_IN, PB8_OUT),
- PINMUX_DATA(CRX0_MARK, PB8MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
-
- PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
- PINMUX_DATA(SDA3_MARK, PB7MD_01),
- PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
- PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
-
- PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
- PINMUX_DATA(SCL3_MARK, PB6MD_01),
- PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
- PINMUX_DATA(SDA2_MARK, PB6MD_01),
- PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
- PINMUX_DATA(SCL2_MARK, PB4MD_01),
- PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
- PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
-
- PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
- PINMUX_DATA(SDA1_MARK, PB3MD_01),
- PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
- PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
-
- PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
- PINMUX_DATA(SCL1_MARK, PB2MD_01),
- PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
- PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
-
- PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
- PINMUX_DATA(SDA0_MARK, PB1MD_01),
- PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
- PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
-
- PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
- PINMUX_DATA(SCL0_MARK, PB0MD_01),
- PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
- PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
-
- /* PC */
- PINMUX_DATA(PC14_DATA, PC14MD_0, PC14_IN, PC14_OUT),
- PINMUX_DATA(WAIT_MARK, PC14MD_1),
-
- PINMUX_DATA(PC13_DATA, PC13MD_0, PC13_IN, PC13_OUT),
- PINMUX_DATA(RDWR_MARK, PC13MD_1),
-
- PINMUX_DATA(PC12_DATA, PC12MD_0, PC12_IN, PC12_OUT),
- PINMUX_DATA(CKE_MARK, PC12MD_1),
-
- PINMUX_DATA(PC11_DATA, PC11MD_00, PC11_IN, PC11_OUT),
- PINMUX_DATA(CASU_MARK, PC11MD_01),
- PINMUX_DATA(BREQ_MARK, PC11MD_10),
-
- PINMUX_DATA(PC10_DATA, PC10MD_00, PC10_IN, PC10_OUT),
- PINMUX_DATA(RASU_MARK, PC10MD_01),
- PINMUX_DATA(BACK_MARK, PC10MD_10),
-
- PINMUX_DATA(PC9_DATA, PC9MD_0, PC9_IN, PC9_OUT),
- PINMUX_DATA(CASL_MARK, PC9MD_1),
-
- PINMUX_DATA(PC8_DATA, PC8MD_0, PC8_IN, PC8_OUT),
- PINMUX_DATA(RASL_MARK, PC8MD_1),
-
- PINMUX_DATA(PC7_DATA, PC7MD_0, PC7_IN, PC7_OUT),
- PINMUX_DATA(WE3_DQMUU_AH_ICIO_WR_MARK, PC7MD_1),
-
- PINMUX_DATA(PC6_DATA, PC6MD_0, PC6_IN, PC6_OUT),
- PINMUX_DATA(WE2_DQMUL_ICIORD_MARK, PC6MD_1),
-
- PINMUX_DATA(PC5_DATA, PC5MD_0, PC5_IN, PC5_OUT),
- PINMUX_DATA(WE1_DQMLU_WE_MARK, PC5MD_1),
-
- PINMUX_DATA(PC4_DATA, PC4MD_0, PC4_IN, PC4_OUT),
- PINMUX_DATA(WE0_DQMLL_MARK, PC4MD_1),
-
- PINMUX_DATA(PC3_DATA, PC3MD_0, PC3_IN, PC3_OUT),
- PINMUX_DATA(CS3_MARK, PC3MD_1),
-
- PINMUX_DATA(PC2_DATA, PC2MD_0, PC2_IN, PC2_OUT),
- PINMUX_DATA(CS2_MARK, PC2MD_1),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0, PC1_IN, PC1_OUT),
- PINMUX_DATA(A1_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_00, PC0_IN, PC0_OUT),
- PINMUX_DATA(A0_MARK, PC0MD_01),
- PINMUX_DATA(CS7_MARK, PC0MD_10),
-
- /* PD */
- PINMUX_DATA(PD15_DATA, PD15MD_000, PD15_IN, PD15_OUT),
- PINMUX_DATA(D31_MARK, PD15MD_001),
- PINMUX_DATA(PINT7_PD_MARK, PD15MD_010),
- PINMUX_DATA(ADTRG_PD_MARK, PD15MD_100),
- PINMUX_DATA(TIOC4D_MARK, PD15MD_101),
-
- PINMUX_DATA(PD14_DATA, PD14MD_000, PD14_IN, PD14_OUT),
- PINMUX_DATA(D30_MARK, PD14MD_001),
- PINMUX_DATA(PINT6_PD_MARK, PD14MD_010),
- PINMUX_DATA(TIOC4C_MARK, PD14MD_101),
-
- PINMUX_DATA(PD13_DATA, PD13MD_000, PD13_IN, PD13_OUT),
- PINMUX_DATA(D29_MARK, PD13MD_001),
- PINMUX_DATA(PINT5_PD_MARK, PD13MD_010),
- PINMUX_DATA(TEND1_PD_MARK, PD13MD_100),
- PINMUX_DATA(TIOC4B_MARK, PD13MD_101),
-
- PINMUX_DATA(PD12_DATA, PD12MD_000, PD12_IN, PD12_OUT),
- PINMUX_DATA(D28_MARK, PD12MD_001),
- PINMUX_DATA(PINT4_PD_MARK, PD12MD_010),
- PINMUX_DATA(DACK1_PD_MARK, PD12MD_100),
- PINMUX_DATA(TIOC4A_MARK, PD12MD_101),
-
- PINMUX_DATA(PD11_DATA, PD11MD_000, PD11_IN, PD11_OUT),
- PINMUX_DATA(D27_MARK, PD11MD_001),
- PINMUX_DATA(PINT3_PD_MARK, PD11MD_010),
- PINMUX_DATA(DREQ1_PD_MARK, PD11MD_100),
- PINMUX_DATA(TIOC3D_MARK, PD11MD_101),
-
- PINMUX_DATA(PD10_DATA, PD10MD_000, PD10_IN, PD10_OUT),
- PINMUX_DATA(D26_MARK, PD10MD_001),
- PINMUX_DATA(PINT2_PD_MARK, PD10MD_010),
- PINMUX_DATA(TEND0_PD_MARK, PD10MD_100),
- PINMUX_DATA(TIOC3C_MARK, PD10MD_101),
-
- PINMUX_DATA(PD9_DATA, PD9MD_000, PD9_IN, PD9_OUT),
- PINMUX_DATA(D25_MARK, PD9MD_001),
- PINMUX_DATA(PINT1_PD_MARK, PD9MD_010),
- PINMUX_DATA(DACK0_PD_MARK, PD9MD_100),
- PINMUX_DATA(TIOC3B_MARK, PD9MD_101),
-
- PINMUX_DATA(PD8_DATA, PD8MD_000, PD8_IN, PD8_OUT),
- PINMUX_DATA(D24_MARK, PD8MD_001),
- PINMUX_DATA(PINT0_PD_MARK, PD8MD_010),
- PINMUX_DATA(DREQ0_PD_MARK, PD8MD_100),
- PINMUX_DATA(TIOC3A_MARK, PD8MD_101),
-
- PINMUX_DATA(PD7_DATA, PD7MD_000, PD7_IN, PD7_OUT),
- PINMUX_DATA(D23_MARK, PD7MD_001),
- PINMUX_DATA(IRQ7_PD_MARK, PD7MD_010),
- PINMUX_DATA(SCS1_PD_MARK, PD7MD_011),
- PINMUX_DATA(TCLKD_PD_MARK, PD7MD_100),
- PINMUX_DATA(TIOC2B_MARK, PD7MD_101),
-
- PINMUX_DATA(PD6_DATA, PD6MD_000, PD6_IN, PD6_OUT),
- PINMUX_DATA(D22_MARK, PD6MD_001),
- PINMUX_DATA(IRQ6_PD_MARK, PD6MD_010),
- PINMUX_DATA(SSO1_PD_MARK, PD6MD_011),
- PINMUX_DATA(TCLKC_PD_MARK, PD6MD_100),
- PINMUX_DATA(TIOC2A_MARK, PD6MD_101),
-
- PINMUX_DATA(PD5_DATA, PD5MD_000, PD5_IN, PD5_OUT),
- PINMUX_DATA(D21_MARK, PD5MD_001),
- PINMUX_DATA(IRQ5_PD_MARK, PD5MD_010),
- PINMUX_DATA(SSI1_PD_MARK, PD5MD_011),
- PINMUX_DATA(TCLKB_PD_MARK, PD5MD_100),
- PINMUX_DATA(TIOC1B_MARK, PD5MD_101),
-
- PINMUX_DATA(PD4_DATA, PD4MD_000, PD4_IN, PD4_OUT),
- PINMUX_DATA(D20_MARK, PD4MD_001),
- PINMUX_DATA(IRQ4_PD_MARK, PD4MD_010),
- PINMUX_DATA(SSCK1_PD_MARK, PD4MD_011),
- PINMUX_DATA(TCLKA_PD_MARK, PD4MD_100),
- PINMUX_DATA(TIOC1A_MARK, PD4MD_101),
-
- PINMUX_DATA(PD3_DATA, PD3MD_000, PD3_IN, PD3_OUT),
- PINMUX_DATA(D19_MARK, PD3MD_001),
- PINMUX_DATA(IRQ3_PD_MARK, PD3MD_010),
- PINMUX_DATA(SCS0_PD_MARK, PD3MD_011),
- PINMUX_DATA(DACK3_MARK, PD3MD_100),
- PINMUX_DATA(TIOC0D_MARK, PD3MD_101),
-
- PINMUX_DATA(PD2_DATA, PD2MD_000, PD2_IN, PD2_OUT),
- PINMUX_DATA(D18_MARK, PD2MD_001),
- PINMUX_DATA(IRQ2_PD_MARK, PD2MD_010),
- PINMUX_DATA(SSO0_PD_MARK, PD2MD_011),
- PINMUX_DATA(DREQ3_MARK, PD2MD_100),
- PINMUX_DATA(TIOC0C_MARK, PD2MD_101),
-
- PINMUX_DATA(PD1_DATA, PD1MD_000, PD1_IN, PD1_OUT),
- PINMUX_DATA(D17_MARK, PD1MD_001),
- PINMUX_DATA(IRQ1_PD_MARK, PD1MD_010),
- PINMUX_DATA(SSI0_PD_MARK, PD1MD_011),
- PINMUX_DATA(DACK2_MARK, PD1MD_100),
- PINMUX_DATA(TIOC0B_MARK, PD1MD_101),
-
- PINMUX_DATA(PD0_DATA, PD0MD_000, PD0_IN, PD0_OUT),
- PINMUX_DATA(D16_MARK, PD0MD_001),
- PINMUX_DATA(IRQ0_PD_MARK, PD0MD_010),
- PINMUX_DATA(SSCK0_PD_MARK, PD0MD_011),
- PINMUX_DATA(DREQ2_MARK, PD0MD_100),
- PINMUX_DATA(TIOC0A_MARK, PD0MD_101),
-
- /* PE */
- PINMUX_DATA(PE15_DATA, PE15MD_00, PE15_IN, PE15_OUT),
- PINMUX_DATA(IOIS16_MARK, PE15MD_01),
- PINMUX_DATA(RTS3_MARK, PE15MD_11),
-
- PINMUX_DATA(PE14_DATA, PE14MD_00, PE14_IN, PE14_OUT),
- PINMUX_DATA(CS1_MARK, PE14MD_01),
- PINMUX_DATA(CTS3_MARK, PE14MD_11),
-
- PINMUX_DATA(PE13_DATA, PE13MD_00, PE13_IN, PE13_OUT),
- PINMUX_DATA(TXD3_MARK, PE13MD_11),
-
- PINMUX_DATA(PE12_DATA, PE12MD_00, PE12_IN, PE12_OUT),
- PINMUX_DATA(RXD3_MARK, PE12MD_11),
-
- PINMUX_DATA(PE11_DATA, PE11MD_000, PE11_IN, PE11_OUT),
- PINMUX_DATA(CS6_CE1B_MARK, PE11MD_001),
- PINMUX_DATA(IRQ7_PE_MARK, PE11MD_010),
- PINMUX_DATA(TEND1_PE_MARK, PE11MD_100),
-
- PINMUX_DATA(PE10_DATA, PE10MD_000, PE10_IN, PE10_OUT),
- PINMUX_DATA(CE2B_MARK, PE10MD_001),
- PINMUX_DATA(IRQ6_PE_MARK, PE10MD_010),
- PINMUX_DATA(TEND0_PE_MARK, PE10MD_100),
-
- PINMUX_DATA(PE9_DATA, PE9MD_00, PE9_IN, PE9_OUT),
- PINMUX_DATA(CS5_CE1A_MARK, PE9MD_01),
- PINMUX_DATA(IRQ5_PE_MARK, PE9MD_10),
- PINMUX_DATA(SCK3_MARK, PE9MD_11),
-
- PINMUX_DATA(PE8_DATA, PE8MD_00, PE8_IN, PE8_OUT),
- PINMUX_DATA(CE2A_MARK, PE8MD_01),
- PINMUX_DATA(IRQ4_PE_MARK, PE8MD_10),
- PINMUX_DATA(SCK2_MARK, PE8MD_11),
-
- PINMUX_DATA(PE7_DATA, PE7MD_000, PE7_IN, PE7_OUT),
- PINMUX_DATA(FRAME_MARK, PE7MD_001),
- PINMUX_DATA(IRQ3_PE_MARK, PE7MD_010),
- PINMUX_DATA(TXD2_MARK, PE7MD_011),
- PINMUX_DATA(DACK1_PE_MARK, PE7MD_100),
-
- PINMUX_DATA(PE6_DATA, PE6MD_000, PE6_IN, PE6_OUT),
- PINMUX_DATA(A25_MARK, PE6MD_001),
- PINMUX_DATA(IRQ2_PE_MARK, PE6MD_010),
- PINMUX_DATA(RXD2_MARK, PE6MD_011),
- PINMUX_DATA(DREQ1_PE_MARK, PE6MD_100),
-
- PINMUX_DATA(PE5_DATA, PE5MD_000, PE5_IN, PE5_OUT),
- PINMUX_DATA(A24_MARK, PE5MD_001),
- PINMUX_DATA(IRQ1_PE_MARK, PE5MD_010),
- PINMUX_DATA(TXD1_MARK, PE5MD_011),
- PINMUX_DATA(DACK0_PE_MARK, PE5MD_100),
-
- PINMUX_DATA(PE4_DATA, PE4MD_000, PE4_IN, PE4_OUT),
- PINMUX_DATA(A23_MARK, PE4MD_001),
- PINMUX_DATA(IRQ0_PE_MARK, PE4MD_010),
- PINMUX_DATA(RXD1_MARK, PE4MD_011),
- PINMUX_DATA(DREQ0_PE_MARK, PE4MD_100),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00, PE3_IN, PE3_OUT),
- PINMUX_DATA(A22_MARK, PE3MD_01),
- PINMUX_DATA(SCK1_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00, PE2_IN, PE2_OUT),
- PINMUX_DATA(A21_MARK, PE2MD_01),
- PINMUX_DATA(SCK0_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_00, PE1_IN, PE1_OUT),
- PINMUX_DATA(CS4_MARK, PE1MD_01),
- PINMUX_DATA(MRES_MARK, PE1MD_10),
- PINMUX_DATA(TXD0_MARK, PE1MD_11),
-
- PINMUX_DATA(PE0_DATA, PE0MD_000, PE0_IN, PE0_OUT),
- PINMUX_DATA(BS_MARK, PE0MD_001),
- PINMUX_DATA(RXD0_MARK, PE0MD_011),
- PINMUX_DATA(ADTRG_PE_MARK, PE0MD_100),
-
- /* PF */
- PINMUX_DATA(PF30_DATA, PF30MD_0, PF30_IN, PF30_OUT),
- PINMUX_DATA(AUDIO_CLK_MARK, PF30MD_1),
-
- PINMUX_DATA(PF29_DATA, PF29MD_0, PF29_IN, PF29_OUT),
- PINMUX_DATA(SSIDATA3_MARK, PF29MD_1),
-
- PINMUX_DATA(PF28_DATA, PF28MD_0, PF28_IN, PF28_OUT),
- PINMUX_DATA(SSIWS3_MARK, PF28MD_1),
-
- PINMUX_DATA(PF27_DATA, PF27MD_0, PF27_IN, PF27_OUT),
- PINMUX_DATA(SSISCK3_MARK, PF27MD_1),
-
- PINMUX_DATA(PF26_DATA, PF26MD_0, PF26_IN, PF26_OUT),
- PINMUX_DATA(SSIDATA2_MARK, PF26MD_1),
-
- PINMUX_DATA(PF25_DATA, PF25MD_0, PF25_IN, PF25_OUT),
- PINMUX_DATA(SSIWS2_MARK, PF25MD_1),
-
- PINMUX_DATA(PF24_DATA, PF24MD_0, PF24_IN, PF24_OUT),
- PINMUX_DATA(SSISCK2_MARK, PF24MD_1),
-
- PINMUX_DATA(PF23_DATA, PF23MD_00, PF23_IN, PF23_OUT),
- PINMUX_DATA(SSIDATA1_MARK, PF23MD_01),
- PINMUX_DATA(LCD_VEPWC_MARK, PF23MD_10),
-
- PINMUX_DATA(PF22_DATA, PF22MD_00, PF22_IN, PF22_OUT),
- PINMUX_DATA(SSIWS1_MARK, PF22MD_01),
- PINMUX_DATA(LCD_VCPWC_MARK, PF22MD_10),
-
- PINMUX_DATA(PF21_DATA, PF21MD_00, PF21_IN, PF21_OUT),
- PINMUX_DATA(SSISCK1_MARK, PF21MD_01),
- PINMUX_DATA(LCD_CLK_MARK, PF21MD_10),
-
- PINMUX_DATA(PF20_DATA, PF20MD_00, PF20_IN, PF20_OUT),
- PINMUX_DATA(SSIDATA0_MARK, PF20MD_01),
- PINMUX_DATA(LCD_FLM_MARK, PF20MD_10),
-
- PINMUX_DATA(PF19_DATA, PF19MD_00, PF19_IN, PF19_OUT),
- PINMUX_DATA(SSIWS0_MARK, PF19MD_01),
- PINMUX_DATA(LCD_M_DISP_MARK, PF19MD_10),
-
- PINMUX_DATA(PF18_DATA, PF18MD_00, PF18_IN, PF18_OUT),
- PINMUX_DATA(SSISCK0_MARK, PF18MD_01),
- PINMUX_DATA(LCD_CL2_MARK, PF18MD_10),
-
- PINMUX_DATA(PF17_DATA, PF17MD_00, PF17_IN, PF17_OUT),
- PINMUX_DATA(FCE_MARK, PF17MD_01),
- PINMUX_DATA(LCD_CL1_MARK, PF17MD_10),
-
- PINMUX_DATA(PF16_DATA, PF16MD_00, PF16_IN, PF16_OUT),
- PINMUX_DATA(FRB_MARK, PF16MD_01),
- PINMUX_DATA(LCD_DON_MARK, PF16MD_10),
-
- PINMUX_DATA(PF15_DATA, PF15MD_00, PF15_IN, PF15_OUT),
- PINMUX_DATA(NAF7_MARK, PF15MD_01),
- PINMUX_DATA(LCD_DATA15_MARK, PF15MD_10),
-
- PINMUX_DATA(PF14_DATA, PF14MD_00, PF14_IN, PF14_OUT),
- PINMUX_DATA(NAF6_MARK, PF14MD_01),
- PINMUX_DATA(LCD_DATA14_MARK, PF14MD_10),
-
- PINMUX_DATA(PF13_DATA, PF13MD_00, PF13_IN, PF13_OUT),
- PINMUX_DATA(NAF5_MARK, PF13MD_01),
- PINMUX_DATA(LCD_DATA13_MARK, PF13MD_10),
-
- PINMUX_DATA(PF12_DATA, PF12MD_00, PF12_IN, PF12_OUT),
- PINMUX_DATA(NAF4_MARK, PF12MD_01),
- PINMUX_DATA(LCD_DATA12_MARK, PF12MD_10),
-
- PINMUX_DATA(PF11_DATA, PF11MD_00, PF11_IN, PF11_OUT),
- PINMUX_DATA(NAF3_MARK, PF11MD_01),
- PINMUX_DATA(LCD_DATA11_MARK, PF11MD_10),
-
- PINMUX_DATA(PF10_DATA, PF10MD_00, PF10_IN, PF10_OUT),
- PINMUX_DATA(NAF2_MARK, PF10MD_01),
- PINMUX_DATA(LCD_DATA10_MARK, PF10MD_10),
-
- PINMUX_DATA(PF9_DATA, PF9MD_00, PF9_IN, PF9_OUT),
- PINMUX_DATA(NAF1_MARK, PF9MD_01),
- PINMUX_DATA(LCD_DATA9_MARK, PF9MD_10),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00, PF8_IN, PF8_OUT),
- PINMUX_DATA(NAF0_MARK, PF8MD_01),
- PINMUX_DATA(LCD_DATA8_MARK, PF8MD_10),
-
- PINMUX_DATA(PF7_DATA, PF7MD_00, PF7_IN, PF7_OUT),
- PINMUX_DATA(FSC_MARK, PF7MD_01),
- PINMUX_DATA(LCD_DATA7_MARK, PF7MD_10),
- PINMUX_DATA(SCS1_PF_MARK, PF7MD_11),
-
- PINMUX_DATA(PF6_DATA, PF6MD_00, PF6_IN, PF6_OUT),
- PINMUX_DATA(FOE_MARK, PF6MD_01),
- PINMUX_DATA(LCD_DATA6_MARK, PF6MD_10),
- PINMUX_DATA(SSO1_PF_MARK, PF6MD_11),
-
- PINMUX_DATA(PF5_DATA, PF5MD_00, PF5_IN, PF5_OUT),
- PINMUX_DATA(FCDE_MARK, PF5MD_01),
- PINMUX_DATA(LCD_DATA5_MARK, PF5MD_10),
- PINMUX_DATA(SSI1_PF_MARK, PF5MD_11),
-
- PINMUX_DATA(PF4_DATA, PF4MD_00, PF4_IN, PF4_OUT),
- PINMUX_DATA(FWE_MARK, PF4MD_01),
- PINMUX_DATA(LCD_DATA4_MARK, PF4MD_10),
- PINMUX_DATA(SSCK1_PF_MARK, PF4MD_11),
-
- PINMUX_DATA(PF3_DATA, PF3MD_00, PF3_IN, PF3_OUT),
- PINMUX_DATA(TCLKD_PF_MARK, PF3MD_01),
- PINMUX_DATA(LCD_DATA3_MARK, PF3MD_10),
- PINMUX_DATA(SCS0_PF_MARK, PF3MD_11),
-
- PINMUX_DATA(PF2_DATA, PF2MD_00, PF2_IN, PF2_OUT),
- PINMUX_DATA(TCLKC_PF_MARK, PF2MD_01),
- PINMUX_DATA(LCD_DATA2_MARK, PF2MD_10),
- PINMUX_DATA(SSO0_PF_MARK, PF2MD_11),
-
- PINMUX_DATA(PF1_DATA, PF1MD_00, PF1_IN, PF1_OUT),
- PINMUX_DATA(TCLKB_PF_MARK, PF1MD_01),
- PINMUX_DATA(LCD_DATA1_MARK, PF1MD_10),
- PINMUX_DATA(SSI0_PF_MARK, PF1MD_11),
-
- PINMUX_DATA(PF0_DATA, PF0MD_00, PF0_IN, PF0_OUT),
- PINMUX_DATA(TCLKA_PF_MARK, PF0MD_01),
- PINMUX_DATA(LCD_DATA0_MARK, PF0MD_10),
- PINMUX_DATA(SSCK0_PF_MARK, PF0MD_11),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC14),
- PINMUX_GPIO(PC13),
- PINMUX_GPIO(PC12),
- PINMUX_GPIO(PC11),
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE15),
- PINMUX_GPIO(PE14),
- PINMUX_GPIO(PE13),
- PINMUX_GPIO(PE12),
- PINMUX_GPIO(PE11),
- PINMUX_GPIO(PE10),
- PINMUX_GPIO(PE9),
- PINMUX_GPIO(PE8),
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF30),
- PINMUX_GPIO(PF29),
- PINMUX_GPIO(PF28),
- PINMUX_GPIO(PF27),
- PINMUX_GPIO(PF26),
- PINMUX_GPIO(PF25),
- PINMUX_GPIO(PF24),
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PB),
- GPIO_FN(PINT6_PB),
- GPIO_FN(PINT5_PB),
- GPIO_FN(PINT4_PB),
- GPIO_FN(PINT3_PB),
- GPIO_FN(PINT2_PB),
- GPIO_FN(PINT1_PB),
- GPIO_FN(PINT0_PB),
- GPIO_FN(PINT7_PD),
- GPIO_FN(PINT6_PD),
- GPIO_FN(PINT5_PD),
- GPIO_FN(PINT4_PD),
- GPIO_FN(PINT3_PD),
- GPIO_FN(PINT2_PD),
- GPIO_FN(PINT1_PD),
- GPIO_FN(PINT0_PD),
- GPIO_FN(IRQ7_PB),
- GPIO_FN(IRQ6_PB),
- GPIO_FN(IRQ5_PB),
- GPIO_FN(IRQ4_PB),
- GPIO_FN(IRQ3_PB),
- GPIO_FN(IRQ2_PB),
- GPIO_FN(IRQ1_PB),
- GPIO_FN(IRQ0_PB),
- GPIO_FN(IRQ7_PD),
- GPIO_FN(IRQ6_PD),
- GPIO_FN(IRQ5_PD),
- GPIO_FN(IRQ4_PD),
- GPIO_FN(IRQ3_PD),
- GPIO_FN(IRQ2_PD),
- GPIO_FN(IRQ1_PD),
- GPIO_FN(IRQ0_PD),
- GPIO_FN(IRQ7_PE),
- GPIO_FN(IRQ6_PE),
- GPIO_FN(IRQ5_PE),
- GPIO_FN(IRQ4_PE),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- GPIO_FN(WDTOVF),
- GPIO_FN(IRQOUT),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT_REFOUT),
- GPIO_FN(UBCTRG),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* IIC3 */
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* DMAC */
- GPIO_FN(TEND0_PD),
- GPIO_FN(TEND0_PE),
- GPIO_FN(DACK0_PD),
- GPIO_FN(DACK0_PE),
- GPIO_FN(DREQ0_PD),
- GPIO_FN(DREQ0_PE),
- GPIO_FN(TEND1_PD),
- GPIO_FN(TEND1_PE),
- GPIO_FN(DACK1_PD),
- GPIO_FN(DACK1_PE),
- GPIO_FN(DREQ1_PD),
- GPIO_FN(DREQ1_PE),
- GPIO_FN(DACK2),
- GPIO_FN(DREQ2),
- GPIO_FN(DACK3),
- GPIO_FN(DREQ3),
-
- /* ADC */
- GPIO_FN(ADTRG_PD),
- GPIO_FN(ADTRG_PE),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(CS4),
- GPIO_FN(MRES),
- GPIO_FN(BS),
- GPIO_FN(IOIS16),
- GPIO_FN(CS1),
- GPIO_FN(CS6_CE1B),
- GPIO_FN(CE2B),
- GPIO_FN(CS5_CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(FRAME),
- GPIO_FN(WAIT),
- GPIO_FN(RDWR),
- GPIO_FN(CKE),
- GPIO_FN(CASU),
- GPIO_FN(BREQ),
- GPIO_FN(RASU),
- GPIO_FN(BACK),
- GPIO_FN(CASL),
- GPIO_FN(RASL),
- GPIO_FN(WE3_DQMUU_AH_ICIO_WR),
- GPIO_FN(WE2_DQMUL_ICIORD),
- GPIO_FN(WE1_DQMLU_WE),
- GPIO_FN(WE0_DQMLL),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(CS7),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD_PD),
- GPIO_FN(TCLKC_PD),
- GPIO_FN(TCLKB_PD),
- GPIO_FN(TCLKA_PD),
- GPIO_FN(TCLKD_PF),
- GPIO_FN(TCLKC_PF),
- GPIO_FN(TCLKB_PF),
- GPIO_FN(TCLKA_PF),
-
- /* SSU */
- GPIO_FN(SCS0_PD),
- GPIO_FN(SSO0_PD),
- GPIO_FN(SSI0_PD),
- GPIO_FN(SSCK0_PD),
- GPIO_FN(SCS0_PF),
- GPIO_FN(SSO0_PF),
- GPIO_FN(SSI0_PF),
- GPIO_FN(SSCK0_PF),
- GPIO_FN(SCS1_PD),
- GPIO_FN(SSO1_PD),
- GPIO_FN(SSI1_PD),
- GPIO_FN(SSCK1_PD),
- GPIO_FN(SCS1_PF),
- GPIO_FN(SSO1_PF),
- GPIO_FN(SSI1_PF),
- GPIO_FN(SSCK1_PF),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
-
- /* SSI */
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(SSIDATA3),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSIDATA0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSISCK0),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FSC),
- GPIO_FN(FOE),
- GPIO_FN(FCDE),
- GPIO_FN(FWE),
-
- /* LCDC */
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PBIORL", 0xfffe3886, 16,
- GROUP(-4, 1, 1, 1, 1, -8),
- GROUP(
- /* RESERVED [4] */
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("PBCRL4", 0xfffe3890, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL3", 0xfffe3892, 16, 4, GROUP(
- PB11MD_0, PB11MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_0, PB10MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL2", 0xfffe3894, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL1", 0xfffe3896, 16, 4, GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IFCR", 0xfffe38a2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCIORL", 0xfffe3906, 16, 1, GROUP(
- 0, 0,
- PC14_IN, PC14_OUT,
- PC13_IN, PC13_OUT,
- PC12_IN, PC12_OUT,
- PC11_IN, PC11_OUT,
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PCCRL4", 0xfffe3910, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC14MD_0, PC14MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC13MD_0, PC13MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC12MD_0, PC12MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL3", 0xfffe3912, 16, 4, GROUP(
- PC11MD_00, PC11MD_01, PC11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC10MD_00, PC10MD_01, PC10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC9MD_0, PC9MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC8MD_0, PC8MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL2", 0xfffe3914, 16, 4, GROUP(
- PC7MD_0, PC7MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_0, PC6MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_0, PC5MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_0, PC4MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL1", 0xfffe3916, 16, 4, GROUP(
- PC3MD_0, PC3MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_0, PC2MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_00, PC0MD_01, PC0MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDIORL", 0xfffe3986, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
- { PINMUX_CFG_REG("PDCRL4", 0xfffe3990, 16, 4, GROUP(
- PD15MD_000, PD15MD_001, PD15MD_010, 0,
- PD15MD_100, PD15MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_000, PD14MD_001, PD14MD_010, 0,
- 0, PD14MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_000, PD13MD_001, PD13MD_010, 0,
- PD13MD_100, PD13MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_000, PD12MD_001, PD12MD_010, 0,
- PD12MD_100, PD12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL3", 0xfffe3992, 16, 4, GROUP(
- PD11MD_000, PD11MD_001, PD11MD_010, 0,
- PD11MD_100, PD11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_000, PD10MD_001, PD10MD_010, 0,
- PD10MD_100, PD10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_000, PD9MD_001, PD9MD_010, 0,
- PD9MD_100, PD9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_000, PD8MD_001, PD8MD_010, 0,
- PD8MD_100, PD8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL2", 0xfffe3994, 16, 4, GROUP(
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011,
- PD7MD_100, PD7MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011,
- PD6MD_100, PD6MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011,
- PD5MD_100, PD5MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011,
- PD4MD_100, PD4MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL1", 0xfffe3996, 16, 4, GROUP(
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011,
- PD3MD_100, PD3MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011,
- PD2MD_100, PD2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011,
- PD1MD_100, PD1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011,
- PD0MD_100, PD0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PEIORL", 0xfffe3a06, 16, 1, GROUP(
- PE15_IN, PE15_OUT,
- PE14_IN, PE14_OUT,
- PE13_IN, PE13_OUT,
- PE12_IN, PE12_OUT,
- PE11_IN, PE11_OUT,
- PE10_IN, PE10_OUT,
- PE9_IN, PE9_OUT,
- PE8_IN, PE8_OUT,
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
- { PINMUX_CFG_REG("PECRL4", 0xfffe3a10, 16, 4, GROUP(
- PE15MD_00, PE15MD_01, 0, PE15MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE14MD_00, PE14MD_01, 0, PE14MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE13MD_00, 0, 0, PE13MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE12MD_00, 0, 0, PE12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL3", 0xfffe3a12, 16, 4, GROUP(
- PE11MD_000, PE11MD_001, PE11MD_010, 0,
- PE11MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE10MD_000, PE10MD_001, PE10MD_010, 0,
- PE10MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL2", 0xfffe3a14, 16, 4, GROUP(
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011,
- PE7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011,
- PE6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011,
- PE5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011,
- PE4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL1", 0xfffe3a16, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_00, PE2MD_01, 0, PE2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_000, PE0MD_001, 0, PE0MD_011,
- PE0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFIORH", 0xfffe3a84, 16, 1, GROUP(
- 0, 0,
- PF30_IN, PF30_OUT,
- PF29_IN, PF29_OUT,
- PF28_IN, PF28_OUT,
- PF27_IN, PF27_OUT,
- PF26_IN, PF26_OUT,
- PF25_IN, PF25_OUT,
- PF24_IN, PF24_OUT,
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIORL", 0xfffe3a86, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PFCRH4", 0xfffe3a88, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
-
- PF30MD_0, PF30MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF29MD_0, PF29MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF28MD_0, PF28MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH3", 0xfffe3a8a, 16, 4, GROUP(
- PF27MD_0, PF27MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF26MD_0, PF26MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF25MD_0, PF25MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF24MD_0, PF24MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH2", 0xfffe3a8c, 16, 4, GROUP(
- PF23MD_00, PF23MD_01, PF23MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_00, PF22MD_01, PF22MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_00, PF21MD_01, PF21MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_00, PF20MD_01, PF20MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH1", 0xfffe3a8e, 16, 4, GROUP(
- PF19MD_00, PF19MD_01, PF19MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_00, PF18MD_01, PF18MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_00, PF17MD_01, PF17MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_00, PF16MD_01, PF16MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL4", 0xfffe3a90, 16, 4, GROUP(
- PF15MD_00, PF15MD_01, PF15MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF14MD_00, PF14MD_01, PF14MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_00, PF13MD_01, PF13MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_00, PF12MD_01, PF12MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL3", 0xfffe3a92, 16, 4, GROUP(
- PF11MD_00, PF11MD_01, PF11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_00, PF10MD_01, PF10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_00, PF9MD_01, PF9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_00, PF8MD_01, PF8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL2", 0xfffe3a94, 16, 4, GROUP(
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL1", 0xfffe3a96, 16, 4, GROUP(
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADRL", 0xfffe3802, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDRL", 0xfffe3882, 16, GROUP(
- 0, 0, 0, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDRL", 0xfffe3902, 16, GROUP(
- 0, PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDRL", 0xfffe3982, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDRL", 0xfffe3a02, 16, GROUP(
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDRH", 0xfffe3a80, 16, GROUP(
- 0, PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDRL", 0xfffe3a82, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7203_pinmux_info = {
- .name = "sh7203_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7264.c b/drivers/pinctrl/renesas/pfc-sh7264.c
deleted file mode 100644
index 30096925a70c5d..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7264.c
+++ /dev/null
@@ -1,2131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7264.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- /* Port K */
- PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- /* Port K */
- PK12_IN,
- PK11_IN, PK10_IN, PK9_IN, PK8_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- /* Port K */
- PK12_OUT,
- PK11_OUT, PK10_OUT, PK9_OUT, PK8_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA3_IOR_IN, PA3_IOR_OUT,
- PA2_IOR_IN, PA2_IOR_OUT,
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB22MD_00, PB22MD_01, PB22MD_10,
- PB21MD_0, PB21MD_1,
- PB20MD_0, PB20MD_1,
- PB19MD_00, PB19MD_01, PB19MD_10, PB19MD_11,
- PB18MD_00, PB18MD_01, PB18MD_10, PB18MD_11,
- PB17MD_00, PB17MD_01, PB17MD_10, PB17MD_11,
- PB16MD_00, PB16MD_01, PB16MD_10, PB16MD_11,
- PB15MD_00, PB15MD_01, PB15MD_10, PB15MD_11,
- PB14MD_00, PB14MD_01, PB14MD_10, PB14MD_11,
- PB13MD_00, PB13MD_01, PB13MD_10, PB13MD_11,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_0, PB3MD_1,
- PB2MD_0, PB2MD_1,
- PB1MD_0, PB1MD_1,
-
- /* Port C */
- PC14_IOR_IN, PC14_IOR_OUT,
- PC13_IOR_IN, PC13_IOR_OUT,
- PC12_IOR_IN, PC12_IOR_OUT,
- PC11_IOR_IN, PC11_IOR_OUT,
- PC10_IOR_IN, PC10_IOR_OUT,
- PC9_IOR_IN, PC9_IOR_OUT,
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC10MD_0, PC10MD_1,
- PC9MD_0, PC9MD_1,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11,
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
- PE3MD_00, PE3MD_01, PE3MD_10, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_10, PE2MD_11,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11,
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, PG17MD_101, PG17MD_110, PG17MD_111,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, PG16MD_101, PG16MD_110, PG16MD_111,
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, PG15MD_101, PG15MD_110, PG15MD_111,
- PG14MD_000, PG14MD_001, PG14MD_010, PG14MD_011,
- PG14MD_100, PG14MD_101, PG14MD_110, PG14MD_111,
- PG13MD_000, PG13MD_001, PG13MD_010, PG13MD_011,
- PG13MD_100, PG13MD_101, PG13MD_110, PG13MD_111,
- PG12MD_000, PG12MD_001, PG12MD_010, PG12MD_011,
- PG12MD_100, PG12MD_101, PG12MD_110, PG12MD_111,
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11,
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_0, PH7MD_1,
- PH6MD_0, PH6MD_1,
- PH5MD_0, PH5MD_1,
- PH4MD_0, PH4MD_1,
- PH3MD_0, PH3MD_1,
- PH2MD_0, PH2MD_1,
- PH1MD_0, PH1MD_1,
- PH0MD_0, PH0MD_1,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ11MD_00, PJ11MD_01, PJ11MD_10, PJ11MD_11,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, PJ10MD_11,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, PJ9MD_11,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, PJ8MD_11,
- PJ7MD_00, PJ7MD_01, PJ7MD_10, PJ7MD_11,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, PJ6MD_11,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, PJ5MD_11,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, PJ4MD_11,
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- /* Port K */
- PK11_IOR_IN, PK11_IOR_OUT,
- PK10_IOR_IN, PK10_IOR_OUT,
- PK9_IOR_IN, PK9_IOR_OUT,
- PK8_IOR_IN, PK8_IOR_OUT,
- PK7_IOR_IN, PK7_IOR_OUT,
- PK6_IOR_IN, PK6_IOR_OUT,
- PK5_IOR_IN, PK5_IOR_OUT,
- PK4_IOR_IN, PK4_IOR_OUT,
- PK3_IOR_IN, PK3_IOR_OUT,
- PK2_IOR_IN, PK2_IOR_OUT,
- PK1_IOR_IN, PK1_IOR_OUT,
- PK0_IOR_IN, PK0_IOR_OUT,
-
- PK11MD_00, PK11MD_01, PK11MD_10, PK11MD_11,
- PK10MD_00, PK10MD_01, PK10MD_10, PK10MD_11,
- PK9MD_00, PK9MD_01, PK9MD_10, PK9MD_11,
- PK8MD_00, PK8MD_01, PK8MD_10, PK8MD_11,
- PK7MD_00, PK7MD_01, PK7MD_10, PK7MD_11,
- PK6MD_00, PK6MD_01, PK6MD_10, PK6MD_11,
- PK5MD_00, PK5MD_01, PK5MD_10, PK5MD_11,
- PK4MD_00, PK4MD_01, PK4MD_10, PK4MD_11,
- PK3MD_00, PK3MD_01, PK3MD_10, PK3MD_11,
- PK2MD_00, PK2MD_01, PK2MD_10, PK2MD_11,
- PK1MD_00, PK1MD_01, PK1MD_10, PK1MD_11,
- PK0MD_00, PK0MD_01, PK0MD_10, PK0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port A */
-
- /* Port B */
-
- /* Port C */
-
- /* Port D */
-
- /* Port E */
-
- /* Port F */
-
- /* Port G */
-
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* Port I - not on device */
-
- /* Port J */
-
- /* Port K */
-
- IRQ7_PC_MARK, IRQ6_PC_MARK, IRQ5_PC_MARK, IRQ4_PC_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
-
- SD_CD_MARK, SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK,
- CRX0_MARK, CRX1_MARK,
- CTX0_MARK, CTX1_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
-
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
- IERXD_MARK, IETXD_MARK,
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS6CE1B_MARK, CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- ICIOWRAH_MARK,
- ICIORD_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, SCK1_MARK, SCK2_MARK, SCK3_MARK,
- RXD0_MARK, RXD1_MARK, RXD2_MARK, RXD3_MARK,
- TXD0_MARK, TXD1_MARK, TXD2_MARK, TXD3_MARK,
- RXD4_MARK, RXD5_MARK, RXD6_MARK, RXD7_MARK,
- TXD4_MARK, TXD5_MARK, TXD6_MARK, TXD7_MARK,
- RTS1_MARK, RTS3_MARK,
- CTS1_MARK, CTS3_MARK,
-
- /* RSPI */
- RSPCK0_MARK, RSPCK1_MARK,
- MOSI0_MARK, MOSI1_MARK,
- MISO0_PF12_MARK, MISO1_MARK, MISO1_PG19_MARK,
- SSL00_MARK, SSL10_MARK,
-
- /* IIC3 */
- SCL0_MARK, SCL1_MARK, SCL2_MARK,
- SDA0_MARK, SDA1_MARK, SDA2_MARK,
-
- /* SSI */
- SSISCK0_MARK,
- SSIWS0_MARK,
- SSITXD0_MARK,
- SSIRXD0_MARK,
- SSIWS1_MARK, SSIWS2_MARK, SSIWS3_MARK,
- SSISCK1_MARK, SSISCK2_MARK, SSISCK3_MARK,
- SSIDATA1_MARK, SSIDATA2_MARK, SSIDATA3_MARK,
- AUDIO_CLK_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* VDC3 */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_00, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_01),
- PINMUX_DATA(CS4_MARK, PB22MD_10),
-
- PINMUX_DATA(PB21_DATA, PB21MD_0, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_1),
- PINMUX_DATA(A20_MARK, PB20MD_1),
- PINMUX_DATA(A19_MARK, PB19MD_01),
- PINMUX_DATA(A18_MARK, PB18MD_01),
- PINMUX_DATA(A17_MARK, PB17MD_01),
- PINMUX_DATA(A16_MARK, PB16MD_01),
- PINMUX_DATA(A15_MARK, PB15MD_01),
- PINMUX_DATA(A14_MARK, PB14MD_01),
- PINMUX_DATA(A13_MARK, PB13MD_01),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_1),
- PINMUX_DATA(A2_MARK, PB2MD_1),
- PINMUX_DATA(A1_MARK, PB1MD_1),
-
- /* Port C */
- PINMUX_DATA(PC10_DATA, PC10MD_0),
- PINMUX_DATA(TIOC2B_MARK, PC1MD_1),
- PINMUX_DATA(PC9_DATA, PC9MD_0),
- PINMUX_DATA(TIOC2A_MARK, PC9MD_1),
- PINMUX_DATA(PC8_DATA, PC8MD_00),
- PINMUX_DATA(CS3_MARK, PC8MD_01),
- PINMUX_DATA(TIOC4D_MARK, PC8MD_10),
- PINMUX_DATA(IRQ7_PC_MARK, PC8MD_11),
- PINMUX_DATA(PC7_DATA, PC7MD_00),
- PINMUX_DATA(CKE_MARK, PC7MD_01),
- PINMUX_DATA(TIOC4C_MARK, PC7MD_10),
- PINMUX_DATA(IRQ6_PC_MARK, PC7MD_11),
- PINMUX_DATA(PC6_DATA, PC6MD_00),
- PINMUX_DATA(CAS_MARK, PC6MD_01),
- PINMUX_DATA(TIOC4B_MARK, PC6MD_10),
- PINMUX_DATA(IRQ5_PC_MARK, PC6MD_11),
- PINMUX_DATA(PC5_DATA, PC5MD_00),
- PINMUX_DATA(RAS_MARK, PC5MD_01),
- PINMUX_DATA(TIOC4A_MARK, PC5MD_10),
- PINMUX_DATA(IRQ4_PC_MARK, PC5MD_11),
- PINMUX_DATA(PC4_DATA, PC4MD_0),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_1),
- PINMUX_DATA(PC3_DATA, PC3MD_0),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_1),
- PINMUX_DATA(PC2_DATA, PC2MD_0),
- PINMUX_DATA(RDWR_MARK, PC2MD_1),
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00),
- PINMUX_DATA(SDA1_MARK, PE3MD_01),
- PINMUX_DATA(IRQ3_PE_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00),
- PINMUX_DATA(SCL1_MARK, PE2MD_01),
- PINMUX_DATA(IRQ2_PE_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(IOIS16_MARK, PE1MD_010),
- PINMUX_DATA(IRQ1_PE_MARK, PE1MD_011),
- PINMUX_DATA(TCLKA_MARK, PE1MD_100),
- PINMUX_DATA(ADTRG_MARK, PE1MD_101),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(AUDIO_CLK_MARK, PE0MD_10),
- PINMUX_DATA(IRQ0_PE_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(BS_MARK, PF12MD_001),
- PINMUX_DATA(MISO0_PF12_MARK, PF12MD_011),
- PINMUX_DATA(TIOC3D_MARK, PF12MD_100),
- PINMUX_DATA(SPDIF_OUT_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(A25_MARK, PF11MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF11MD_010),
- PINMUX_DATA(MOSI0_MARK, PF11MD_011),
- PINMUX_DATA(TIOC3C_MARK, PF11MD_100),
- PINMUX_DATA(SPDIF_IN_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(A24_MARK, PF10MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF10MD_010),
- PINMUX_DATA(SSL00_MARK, PF10MD_011),
- PINMUX_DATA(TIOC3B_MARK, PF10MD_100),
- PINMUX_DATA(FCE_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(A23_MARK, PF9MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF9MD_010),
- PINMUX_DATA(RSPCK0_MARK, PF9MD_011),
- PINMUX_DATA(TIOC3A_MARK, PF9MD_100),
- PINMUX_DATA(FRB_MARK, PF9MD_101),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00),
- PINMUX_DATA(CE2B_MARK, PF8MD_01),
- PINMUX_DATA(SSIDATA3_MARK, PF8MD_10),
- PINMUX_DATA(DV_CLK_MARK, PF8MD_11),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(CE2A_MARK, PF7MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF7MD_010),
- PINMUX_DATA(DV_DATA7_MARK, PF7MD_011),
- PINMUX_DATA(TCLKD_MARK, PF7MD_100),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CS6CE1B_MARK, PF6MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF6MD_010),
- PINMUX_DATA(DV_DATA6_MARK, PF6MD_011),
- PINMUX_DATA(TCLKB_MARK, PF6MD_100),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF5MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF5MD_010),
- PINMUX_DATA(DV_DATA5_MARK, PF5MD_011),
- PINMUX_DATA(TCLKC_MARK, PF5MD_100),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(ICIOWRAH_MARK, PF4MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF4MD_010),
- PINMUX_DATA(DV_DATA4_MARK, PF4MD_011),
- PINMUX_DATA(TXD3_MARK, PF4MD_100),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(ICIORD_MARK, PF3MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF3MD_010),
- PINMUX_DATA(DV_DATA3_MARK, PF3MD_011),
- PINMUX_DATA(RXD3_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(BACK_MARK, PF2MD_001),
- PINMUX_DATA(SSIDATA1_MARK, PF2MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF2MD_011),
- PINMUX_DATA(TXD2_MARK, PF2MD_100),
- PINMUX_DATA(DACK0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BREQ_MARK, PF1MD_001),
- PINMUX_DATA(SSIWS1_MARK, PF1MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF1MD_011),
- PINMUX_DATA(RXD2_MARK, PF1MD_100),
- PINMUX_DATA(DREQ0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(WAIT_MARK, PF0MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF0MD_010),
- PINMUX_DATA(DV_DATA0_MARK, PF0MD_011),
- PINMUX_DATA(SCK2_MARK, PF0MD_100),
- PINMUX_DATA(TEND0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(MOSI0_MARK, PG24MD_01),
- PINMUX_DATA(TIOC0D_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_00),
- PINMUX_DATA(MOSI1_MARK, PG23MD_01),
- PINMUX_DATA(TIOC0C_MARK, PG23MD_10),
-
- PINMUX_DATA(PG22_DATA, PG22MD_00),
- PINMUX_DATA(SSL10_MARK, PG22MD_01),
- PINMUX_DATA(TIOC0B_MARK, PG22MD_10),
-
- PINMUX_DATA(PG21_DATA, PG21MD_00),
- PINMUX_DATA(RSPCK1_MARK, PG21MD_01),
- PINMUX_DATA(TIOC0A_MARK, PG21MD_10),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG20MD_001),
- PINMUX_DATA(MISO1_MARK, PG20MD_011),
- PINMUX_DATA(TXD7_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(LCD_CLK_MARK, PG19MD_001),
- PINMUX_DATA(TIOC2B_MARK, PG19MD_010),
- PINMUX_DATA(MISO1_PG19_MARK, PG19MD_011),
- PINMUX_DATA(RXD7_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(LCD_DE_MARK, PG18MD_001),
- PINMUX_DATA(TIOC2A_MARK, PG18MD_010),
- PINMUX_DATA(SSL10_MARK, PG18MD_011),
- PINMUX_DATA(TXD6_MARK, PG18MD_100),
-
- PINMUX_DATA(PG17_DATA, PG17MD_000),
- PINMUX_DATA(LCD_HSYNC_MARK, PG17MD_001),
- PINMUX_DATA(TIOC1B_MARK, PG17MD_010),
- PINMUX_DATA(RSPCK1_MARK, PG17MD_011),
- PINMUX_DATA(RXD6_MARK, PG17MD_100),
-
- PINMUX_DATA(PG16_DATA, PG16MD_000),
- PINMUX_DATA(LCD_VSYNC_MARK, PG16MD_001),
- PINMUX_DATA(TIOC1A_MARK, PG16MD_010),
- PINMUX_DATA(TXD3_MARK, PG16MD_011),
- PINMUX_DATA(CTS1_MARK, PG16MD_100),
-
- PINMUX_DATA(PG15_DATA, PG15MD_000),
- PINMUX_DATA(LCD_DATA15_MARK, PG15MD_001),
- PINMUX_DATA(TIOC0D_MARK, PG15MD_010),
- PINMUX_DATA(RXD3_MARK, PG15MD_011),
- PINMUX_DATA(RTS1_MARK, PG15MD_100),
-
- PINMUX_DATA(PG14_DATA, PG14MD_000),
- PINMUX_DATA(LCD_DATA14_MARK, PG14MD_001),
- PINMUX_DATA(TIOC0C_MARK, PG14MD_010),
- PINMUX_DATA(SCK1_MARK, PG14MD_100),
-
- PINMUX_DATA(PG13_DATA, PG13MD_000),
- PINMUX_DATA(LCD_DATA13_MARK, PG13MD_001),
- PINMUX_DATA(TIOC0B_MARK, PG13MD_010),
- PINMUX_DATA(TXD1_MARK, PG13MD_100),
-
- PINMUX_DATA(PG12_DATA, PG12MD_000),
- PINMUX_DATA(LCD_DATA12_MARK, PG12MD_001),
- PINMUX_DATA(TIOC0A_MARK, PG12MD_010),
- PINMUX_DATA(RXD1_MARK, PG12MD_100),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(LCD_DATA11_MARK, PG11MD_001),
- PINMUX_DATA(SSITXD0_MARK, PG11MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TXD5_MARK, PG11MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PG11MD_101),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(LCD_DATA10_MARK, PG10MD_001),
- PINMUX_DATA(SSIRXD0_MARK, PG10MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG10MD_011),
- PINMUX_DATA(RXD5_MARK, PG10MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PG10MD_101),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(LCD_DATA9_MARK, PG9MD_001),
- PINMUX_DATA(SSIWS0_MARK, PG9MD_010),
- PINMUX_DATA(TXD4_MARK, PG9MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PG9MD_101),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(LCD_DATA8_MARK, PG8MD_001),
- PINMUX_DATA(SSISCK0_MARK, PG8MD_010),
- PINMUX_DATA(RXD4_MARK, PG8MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PG8MD_101),
-
- PINMUX_DATA(PG7_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA7_MARK, PG7MD_01),
- PINMUX_DATA(SD_CD_MARK, PG7MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG6_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA6_MARK, PG7MD_01),
- PINMUX_DATA(SD_WP_MARK, PG7MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG5_DATA, PG5MD_00),
- PINMUX_DATA(LCD_DATA5_MARK, PG5MD_01),
- PINMUX_DATA(SD_D1_MARK, PG5MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG5MD_11),
-
- PINMUX_DATA(PG4_DATA, PG4MD_00),
- PINMUX_DATA(LCD_DATA4_MARK, PG4MD_01),
- PINMUX_DATA(SD_D0_MARK, PG4MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG4MD_11),
-
- PINMUX_DATA(PG3_DATA, PG3MD_00),
- PINMUX_DATA(LCD_DATA3_MARK, PG3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PG3MD_10),
- PINMUX_DATA(PINT3_PG_MARK, PG3MD_11),
-
- PINMUX_DATA(PG2_DATA, PG2MD_00),
- PINMUX_DATA(LCD_DATA2_MARK, PG2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PG2MD_10),
- PINMUX_DATA(PINT2_PG_MARK, PG2MD_11),
-
- PINMUX_DATA(PG1_DATA, PG1MD_00),
- PINMUX_DATA(LCD_DATA1_MARK, PG1MD_01),
- PINMUX_DATA(SD_D3_MARK, PG1MD_10),
- PINMUX_DATA(PINT1_PG_MARK, PG1MD_11),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(LCD_DATA0_MARK, PG0MD_001),
- PINMUX_DATA(SD_D2_MARK, PG0MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG0MD_011),
- PINMUX_DATA(WDTOVF_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_0),
- PINMUX_DATA(PHAN7_MARK, PH7MD_1),
-
- PINMUX_DATA(PH6_DATA, PH6MD_0),
- PINMUX_DATA(PHAN6_MARK, PH6MD_1),
-
- PINMUX_DATA(PH5_DATA, PH5MD_0),
- PINMUX_DATA(PHAN5_MARK, PH5MD_1),
-
- PINMUX_DATA(PH4_DATA, PH4MD_0),
- PINMUX_DATA(PHAN4_MARK, PH4MD_1),
-
- PINMUX_DATA(PH3_DATA, PH3MD_0),
- PINMUX_DATA(PHAN3_MARK, PH3MD_1),
-
- PINMUX_DATA(PH2_DATA, PH2MD_0),
- PINMUX_DATA(PHAN2_MARK, PH2MD_1),
-
- PINMUX_DATA(PH1_DATA, PH1MD_0),
- PINMUX_DATA(PHAN1_MARK, PH1MD_1),
-
- PINMUX_DATA(PH0_DATA, PH0MD_0),
- PINMUX_DATA(PHAN0_MARK, PH0MD_1),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ11_DATA, PJ11MD_00),
- PINMUX_DATA(PWM2H_MARK, PJ11MD_01),
- PINMUX_DATA(DACK1_MARK, PJ11MD_10),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_00),
- PINMUX_DATA(PWM2G_MARK, PJ10MD_01),
- PINMUX_DATA(DREQ1_MARK, PJ10MD_10),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_00),
- PINMUX_DATA(PWM2F_MARK, PJ9MD_01),
- PINMUX_DATA(TEND1_MARK, PJ9MD_10),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_00),
- PINMUX_DATA(PWM2E_MARK, PJ8MD_01),
- PINMUX_DATA(RTS3_MARK, PJ8MD_10),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_00),
- PINMUX_DATA(TIOC1B_MARK, PJ7MD_01),
- PINMUX_DATA(CTS3_MARK, PJ7MD_10),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_00),
- PINMUX_DATA(TIOC1A_MARK, PJ6MD_01),
- PINMUX_DATA(SCK3_MARK, PJ6MD_10),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_00),
- PINMUX_DATA(IERXD_MARK, PJ5MD_01),
- PINMUX_DATA(TXD3_MARK, PJ5MD_10),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_00),
- PINMUX_DATA(IETXD_MARK, PJ4MD_01),
- PINMUX_DATA(RXD3_MARK, PJ4MD_10),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_00),
- PINMUX_DATA(CRX1_MARK, PJ3MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(CTX1_MARK, PJ2MD_001),
- PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010),
- PINMUX_DATA(CS2_MARK, PJ2MD_011),
- PINMUX_DATA(SCK0_MARK, PJ2MD_100),
- PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(CRX0_MARK, PJ1MD_001),
- PINMUX_DATA(IERXD_MARK, PJ1MD_010),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ1MD_011),
- PINMUX_DATA(RXD0_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(CTX0_MARK, PJ0MD_001),
- PINMUX_DATA(IERXD_MARK, PJ0MD_010),
- PINMUX_DATA(CS1_MARK, PJ0MD_011),
- PINMUX_DATA(TXD0_MARK, PJ0MD_100),
- PINMUX_DATA(A0_MARK, PJ0MD_101),
-
- /* Port K */
- PINMUX_DATA(PK11_DATA, PK11MD_00),
- PINMUX_DATA(PWM2D_MARK, PK11MD_01),
- PINMUX_DATA(SSITXD0_MARK, PK11MD_10),
-
- PINMUX_DATA(PK10_DATA, PK10MD_00),
- PINMUX_DATA(PWM2C_MARK, PK10MD_01),
- PINMUX_DATA(SSIRXD0_MARK, PK10MD_10),
-
- PINMUX_DATA(PK9_DATA, PK9MD_00),
- PINMUX_DATA(PWM2B_MARK, PK9MD_01),
- PINMUX_DATA(SSIWS0_MARK, PK9MD_10),
-
- PINMUX_DATA(PK8_DATA, PK8MD_00),
- PINMUX_DATA(PWM2A_MARK, PK8MD_01),
- PINMUX_DATA(SSISCK0_MARK, PK8MD_10),
-
- PINMUX_DATA(PK7_DATA, PK7MD_00),
- PINMUX_DATA(PWM1H_MARK, PK7MD_01),
- PINMUX_DATA(SD_CD_MARK, PK7MD_10),
-
- PINMUX_DATA(PK6_DATA, PK6MD_00),
- PINMUX_DATA(PWM1G_MARK, PK6MD_01),
- PINMUX_DATA(SD_WP_MARK, PK6MD_10),
-
- PINMUX_DATA(PK5_DATA, PK5MD_00),
- PINMUX_DATA(PWM1F_MARK, PK5MD_01),
- PINMUX_DATA(SD_D1_MARK, PK5MD_10),
-
- PINMUX_DATA(PK4_DATA, PK4MD_00),
- PINMUX_DATA(PWM1E_MARK, PK4MD_01),
- PINMUX_DATA(SD_D0_MARK, PK4MD_10),
-
- PINMUX_DATA(PK3_DATA, PK3MD_00),
- PINMUX_DATA(PWM1D_MARK, PK3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PK3MD_10),
-
- PINMUX_DATA(PK2_DATA, PK2MD_00),
- PINMUX_DATA(PWM1C_MARK, PK2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PK2MD_10),
-
- PINMUX_DATA(PK1_DATA, PK1MD_00),
- PINMUX_DATA(PWM1B_MARK, PK1MD_01),
- PINMUX_DATA(SD_D3_MARK, PK1MD_10),
-
- PINMUX_DATA(PK0_DATA, PK0MD_00),
- PINMUX_DATA(PWM1A_MARK, PK0MD_01),
- PINMUX_DATA(SD_D2_MARK, PK0MD_10),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* Port K */
- PINMUX_GPIO(PK11),
- PINMUX_GPIO(PK10),
- PINMUX_GPIO(PK9),
- PINMUX_GPIO(PK8),
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
-
- GPIO_FN(IRQ7_PC),
- GPIO_FN(IRQ6_PC),
- GPIO_FN(IRQ5_PC),
- GPIO_FN(IRQ4_PC),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS6CE1B),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(ICIOWRAH),
- GPIO_FN(ICIORD),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
-
- /* RSPI */
- GPIO_FN(RSPCK0),
- GPIO_FN(MOSI0),
- GPIO_FN(MISO0_PF12),
- GPIO_FN(MISO1),
- GPIO_FN(SSL00),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1_PG19),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-12, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [12] */
- PA3_IN, PA3_OUT,
- PA2_IN, PA2_OUT,
- PA1_IN, PA1_OUT,
- PA0_IN, PA0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_00, PB22MD_01, PB22MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB21MD_0, PB21MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB20MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
-
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- 0, PB19MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB18MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB17MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB16MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- 0, PB15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- 0, PB11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- 0, PB7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- 0, PB3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
-
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC10MD_0, PC10MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC9MD_0, PC9MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC4MD_0, PC4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_0, PC3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC2MD_0, PC2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [5] */
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- 0, PD15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- 0, PD11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- 0, PD7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- 0, PD3MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD2MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD1MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD0MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PECR1", 0xfffe388c, 16,
- GROUP(-8, 4, 4),
- GROUP(
- /* RESERVED [8] */
- PE5MD_00, PE5MD_01, 0, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE4MD_00, PE4MD_01, 0, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE2MD_00, PE2MD_01, 0, PE2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-10, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [10] */
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF12MD_000, PF12MD_001, 0, PF12MD_011,
- PF12MD_100, PF12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR7", 0xfffe38c0, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR6", 0xfffe38c2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG14MD_000, PG14MD_001, PG14MD_010, 0,
- PG14MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG13MD_000, PG13MD_001, PG13MD_010, 0,
- PG13MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG12MD_000, PG12MD_001, PG12MD_010, 0,
- PG12MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR0", 0xfffe38ce, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG_VAR("PGIOR1", 0xfffe38d0, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
-
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_0, PH7MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH6MD_0, PH6MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH5MD_0, PH5MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH4MD_0, PH4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_0, PH3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH2MD_0, PH2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH1MD_0, PH1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH0MD_0, PH0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_00, PJ11MD_01, PJ11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_00, PJ7MD_01, PJ7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- { PINMUX_CFG_REG("PKCR2", 0xfffe392a, 16, 4, GROUP(
- PK11MD_00, PK11MD_01, PK11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK10MD_00, PK10MD_01, PK10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK9MD_00, PK9MD_01, PK9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK8MD_00, PK8MD_01, PK8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKCR1", 0xfffe392c, 16, 4, GROUP(
- PK7MD_00, PK7MD_01, PK7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK6MD_00, PK6MD_01, PK6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK5MD_00, PK5MD_01, PK5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK4MD_00, PK4MD_01, PK4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PKCR0", 0xfffe392e, 16, 4, GROUP(
- PK3MD_00, PK3MD_01, PK3MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK2MD_00, PK2MD_01, PK2MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK1MD_00, PK1MD_01, PK1MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK0MD_00, PK0MD_01, PK0MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKIOR0", 0xfffe3932, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK11_IN, PK11_OUT,
- PK10_IN, PK10_OUT,
- PK9_IN, PK9_OUT,
- PK8_IN, PK8_OUT,
- PK7_IN, PK7_OUT,
- PK6_IN, PK6_OUT,
- PK5_IN, PK5_OUT,
- PK4_IN, PK4_OUT,
- PK3_IN, PK3_OUT,
- PK2_IN, PK2_OUT,
- PK1_IN, PK1_OUT,
- PK0_IN, PK0_OUT ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR1", 0xfffe3814, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA3_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA2_DATA ))
- },
-
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- 0, 0, 0, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- 0, 0, 0, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR0", 0xfffe3936, 16, GROUP(
- 0, 0, 0, PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { }
-};
-
-const struct sh_pfc_soc_info sh7264_pinmux_info = {
- .name = "sh7264_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7269.c b/drivers/pinctrl/renesas/pfc-sh7269.c
deleted file mode 100644
index f59f558d75ae25..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7269.c
+++ /dev/null
@@ -1,2851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7269.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA,
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG27_IN, PG26_IN, PG25_IN, PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_IN, PJ30_IN, PJ29_IN, PJ28_IN,
- PJ27_IN, PJ26_IN, PJ25_IN, PJ24_IN,
- PJ23_IN, PJ22_IN, PJ21_IN, PJ20_IN,
- PJ19_IN, PJ18_IN, PJ17_IN, PJ16_IN,
- PJ15_IN, PJ14_IN, PJ13_IN, PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG27_OUT, PG26_OUT, PG25_OUT, PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_OUT, PJ30_OUT, PJ29_OUT, PJ28_OUT,
- PJ27_OUT, PJ26_OUT, PJ25_OUT, PJ24_OUT,
- PJ23_OUT, PJ22_OUT, PJ21_OUT, PJ20_OUT,
- PJ19_OUT, PJ18_OUT, PJ17_OUT, PJ16_OUT,
- PJ15_OUT, PJ14_OUT, PJ13_OUT, PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB22_IOR_IN, PB22_IOR_OUT,
- PB21_IOR_IN, PB21_IOR_OUT,
- PB20_IOR_IN, PB20_IOR_OUT,
- PB19_IOR_IN, PB19_IOR_OUT,
- PB18_IOR_IN, PB18_IOR_OUT,
- PB17_IOR_IN, PB17_IOR_OUT,
- PB16_IOR_IN, PB16_IOR_OUT,
-
- PB15_IOR_IN, PB15_IOR_OUT,
- PB14_IOR_IN, PB14_IOR_OUT,
- PB13_IOR_IN, PB13_IOR_OUT,
- PB12_IOR_IN, PB12_IOR_OUT,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB7_IOR_IN, PB7_IOR_OUT,
- PB6_IOR_IN, PB6_IOR_OUT,
- PB5_IOR_IN, PB5_IOR_OUT,
- PB4_IOR_IN, PB4_IOR_OUT,
- PB3_IOR_IN, PB3_IOR_OUT,
- PB2_IOR_IN, PB2_IOR_OUT,
- PB1_IOR_IN, PB1_IOR_OUT,
- PB0_IOR_IN, PB0_IOR_OUT,
-
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11,
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
-
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
-
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
-
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
-
- /* Port C */
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11,
-
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11,
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
-
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
-
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
-
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE7_IOR_IN, PE7_IOR_OUT,
- PE6_IOR_IN, PE6_IOR_OUT,
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11,
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11,
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
-
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF23_IOR_IN, PF23_IOR_OUT,
- PF22_IOR_IN, PF22_IOR_OUT,
- PF21_IOR_IN, PF21_IOR_OUT,
- PF20_IOR_IN, PF20_IOR_OUT,
- PF19_IOR_IN, PF19_IOR_OUT,
- PF18_IOR_IN, PF18_IOR_OUT,
- PF17_IOR_IN, PF17_IOR_OUT,
- PF16_IOR_IN, PF16_IOR_OUT,
- PF15_IOR_IN, PF15_IOR_OUT,
- PF14_IOR_IN, PF14_IOR_OUT,
- PF13_IOR_IN, PF13_IOR_OUT,
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
-
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
-
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
-
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
-
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
-
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG27_IOR_IN, PG27_IOR_OUT,
- PG26_IOR_IN, PG26_IOR_OUT,
- PG25_IOR_IN, PG25_IOR_OUT,
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11,
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11,
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11,
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
-
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
-
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11,
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11,
-
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11,
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11,
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11,
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11,
-
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
-
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
-
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11,
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11,
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11,
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11,
-
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11,
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11,
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11,
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ31_IOR_IN, PJ31_IOR_OUT,
- PJ30_IOR_IN, PJ30_IOR_OUT,
- PJ29_IOR_IN, PJ29_IOR_OUT,
- PJ28_IOR_IN, PJ28_IOR_OUT,
- PJ27_IOR_IN, PJ27_IOR_OUT,
- PJ26_IOR_IN, PJ26_IOR_OUT,
- PJ25_IOR_IN, PJ25_IOR_OUT,
- PJ24_IOR_IN, PJ24_IOR_OUT,
- PJ23_IOR_IN, PJ23_IOR_OUT,
- PJ22_IOR_IN, PJ22_IOR_OUT,
- PJ21_IOR_IN, PJ21_IOR_OUT,
- PJ20_IOR_IN, PJ20_IOR_OUT,
- PJ19_IOR_IN, PJ19_IOR_OUT,
- PJ18_IOR_IN, PJ18_IOR_OUT,
- PJ17_IOR_IN, PJ17_IOR_OUT,
- PJ16_IOR_IN, PJ16_IOR_OUT,
- PJ15_IOR_IN, PJ15_IOR_OUT,
- PJ14_IOR_IN, PJ14_IOR_OUT,
- PJ13_IOR_IN, PJ13_IOR_OUT,
- PJ12_IOR_IN, PJ12_IOR_OUT,
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ31MD_0, PJ31MD_1,
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
-
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
-
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
-
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
-
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
-
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
-
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
-
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* IRQs */
- IRQ7_PG_MARK, IRQ6_PG_MARK, IRQ5_PG_MARK, IRQ4_PG_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PG_MARK, IRQ0_PG_MARK,
- IRQ7_PF_MARK, IRQ6_PF_MARK, IRQ5_PF_MARK, IRQ4_PF_MARK,
- IRQ3_PJ_MARK, IRQ2_PJ_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ1_PC_MARK, IRQ0_PC_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
- PINT7_PH_MARK, PINT6_PH_MARK, PINT5_PH_MARK, PINT4_PH_MARK,
- PINT3_PH_MARK, PINT2_PH_MARK, PINT1_PH_MARK, PINT0_PH_MARK,
- PINT7_PJ_MARK, PINT6_PJ_MARK, PINT5_PJ_MARK, PINT4_PJ_MARK,
- PINT3_PJ_MARK, PINT2_PJ_MARK, PINT1_PJ_MARK, PINT0_PJ_MARK,
-
- /* SD */
- SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, SD_CD_MARK,
-
- /* MMC */
- MMC_D0_MARK, MMC_D1_MARK, MMC_D2_MARK, MMC_D3_MARK,
- MMC_D4_MARK, MMC_D5_MARK, MMC_D6_MARK, MMC_D7_MARK,
- MMC_CLK_MARK, MMC_CMD_MARK, MMC_CD_MARK,
-
- /* PWM */
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
-
- /* IEBus */
- IERXD_MARK, IETXD_MARK,
-
- /* WDT */
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- WE3ICIOWRAHDQMUU_MARK,
- WE2ICIORDDQMUL_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, RXD0_MARK, TXD0_MARK,
- SCK1_MARK, RXD1_MARK, TXD1_MARK, RTS1_MARK, CTS1_MARK,
- SCK2_MARK, RXD2_MARK, TXD2_MARK,
- SCK3_MARK, RXD3_MARK, TXD3_MARK,
- SCK4_MARK, RXD4_MARK, TXD4_MARK,
- SCK5_MARK, RXD5_MARK, TXD5_MARK, RTS5_MARK, CTS5_MARK,
- SCK6_MARK, RXD6_MARK, TXD6_MARK,
- SCK7_MARK, RXD7_MARK, TXD7_MARK, RTS7_MARK, CTS7_MARK,
-
- /* RSPI */
- MISO0_PB20_MARK, MOSI0_PB19_MARK, SSL00_PB18_MARK, RSPCK0_PB17_MARK,
- MISO0_PJ19_MARK, MOSI0_PJ18_MARK, SSL00_PJ17_MARK, RSPCK0_PJ16_MARK,
- MISO1_MARK, MOSI1_MARK, SSL10_MARK, RSPCK1_MARK,
-
- /* IIC3 */
- SCL0_MARK, SDA0_MARK,
- SCL1_MARK, SDA1_MARK,
- SCL2_MARK, SDA2_MARK,
- SCL3_MARK, SDA3_MARK,
-
- /* SSI */
- SSISCK0_MARK, SSIWS0_MARK, SSITXD0_MARK, SSIRXD0_MARK,
- SSISCK1_MARK, SSIWS1_MARK, SSIDATA1_MARK,
- SSISCK2_MARK, SSIWS2_MARK, SSIDATA2_MARK,
- SSISCK3_MARK, SSIWS3_MARK, SSIDATA3_MARK,
- SSISCK4_MARK, SSIWS4_MARK, SSIDATA4_MARK,
- SSISCK5_MARK, SSIWS5_MARK, SSIDATA5_MARK,
- AUDIO_CLK_MARK,
- AUDIO_XOUT_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
- SPDIF_IN_PJ24_MARK, SPDIF_OUT_PJ25_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* CAN */
- CRX0_MARK, CTX0_MARK,
- CRX1_MARK, CTX1_MARK,
- CRX2_MARK, CTX2_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
- CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
- CRX1_PJ22_MARK, CTX1_PJ23_MARK,
- CRX2_PJ20_MARK, CTX2_PJ21_MARK,
- CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
- CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
-
- /* VDC */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA23_MARK, DV_DATA22_MARK, DV_DATA21_MARK, DV_DATA20_MARK,
- DV_DATA19_MARK, DV_DATA18_MARK, DV_DATA17_MARK, DV_DATA16_MARK,
- DV_DATA15_MARK, DV_DATA14_MARK, DV_DATA13_MARK, DV_DATA12_MARK,
- DV_DATA11_MARK, DV_DATA10_MARK, DV_DATA9_MARK, DV_DATA8_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK,
- LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK,
- LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK,
- LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK,
- LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK,
- LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK,
- LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK,
- LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK,
- LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK,
- LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK,
- LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK,
- LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK,
- LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK,
- LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK,
- LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK,
- LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK,
- LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK,
- LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_000, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_001),
- PINMUX_DATA(CTX2_MARK, PB22MD_010),
- PINMUX_DATA(IETXD_MARK, PB22MD_011),
- PINMUX_DATA(CS4_MARK, PB22MD_100),
-
- PINMUX_DATA(PB21_DATA, PB21MD_00, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_01),
- PINMUX_DATA(CRX2_MARK, PB21MD_10),
- PINMUX_DATA(IERXD_MARK, PB21MD_11),
-
- PINMUX_DATA(A20_MARK, PB20MD_001),
- PINMUX_DATA(A19_MARK, PB19MD_001),
- PINMUX_DATA(A18_MARK, PB18MD_001),
- PINMUX_DATA(A17_MARK, PB17MD_001),
- PINMUX_DATA(A16_MARK, PB16MD_001),
- PINMUX_DATA(A15_MARK, PB15MD_001),
- PINMUX_DATA(A14_MARK, PB14MD_001),
- PINMUX_DATA(A13_MARK, PB13MD_001),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_01),
- PINMUX_DATA(A2_MARK, PB2MD_01),
- PINMUX_DATA(A1_MARK, PB1MD_01),
-
- /* Port C */
- PINMUX_DATA(PC8_DATA, PC8MD_000),
- PINMUX_DATA(CS3_MARK, PC8MD_001),
- PINMUX_DATA(TXD7_MARK, PC8MD_010),
- PINMUX_DATA(CTX1_MARK, PC8MD_011),
- PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
-
- PINMUX_DATA(PC7_DATA, PC7MD_000),
- PINMUX_DATA(CKE_MARK, PC7MD_001),
- PINMUX_DATA(RXD7_MARK, PC7MD_010),
- PINMUX_DATA(CRX1_MARK, PC7MD_011),
- PINMUX_DATA(CRX0_CRX1_MARK, PC7MD_100),
- PINMUX_DATA(IRQ1_PC_MARK, PC7MD_101),
-
- PINMUX_DATA(PC6_DATA, PC6MD_000),
- PINMUX_DATA(CAS_MARK, PC6MD_001),
- PINMUX_DATA(SCK7_MARK, PC6MD_010),
- PINMUX_DATA(CTX0_MARK, PC6MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
-
- PINMUX_DATA(PC5_DATA, PC5MD_000),
- PINMUX_DATA(RAS_MARK, PC5MD_001),
- PINMUX_DATA(CRX0_MARK, PC5MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
- PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
-
- PINMUX_DATA(PC4_DATA, PC4MD_00),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_01),
- PINMUX_DATA(TXD6_MARK, PC4MD_10),
-
- PINMUX_DATA(PC3_DATA, PC3MD_00),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_01),
- PINMUX_DATA(RXD6_MARK, PC3MD_10),
-
- PINMUX_DATA(PC2_DATA, PC2MD_00),
- PINMUX_DATA(RDWR_MARK, PC2MD_01),
- PINMUX_DATA(SCK5_MARK, PC2MD_10),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
-
- PINMUX_DATA(PD13_DATA, PD13MD_00),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(PWM2F_MARK, PD13MD_10),
-
- PINMUX_DATA(PD12_DATA, PD12MD_00),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(PWM2E_MARK, PD12MD_10),
-
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE7_DATA, PE7MD_00),
- PINMUX_DATA(SDA3_MARK, PE7MD_01),
- PINMUX_DATA(RXD7_MARK, PE7MD_10),
-
- PINMUX_DATA(PE6_DATA, PE6MD_00),
- PINMUX_DATA(SCL3_MARK, PE6MD_01),
- PINMUX_DATA(RXD6_MARK, PE6MD_10),
-
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(RXD5_MARK, PE5MD_10),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_000),
- PINMUX_DATA(SDA1_MARK, PE3MD_001),
- PINMUX_DATA(TCLKD_MARK, PE3MD_010),
- PINMUX_DATA(ADTRG_MARK, PE3MD_011),
- PINMUX_DATA(DV_HSYNC_MARK, PE3MD_100),
-
- PINMUX_DATA(PE2_DATA, PE2MD_000),
- PINMUX_DATA(SCL1_MARK, PE2MD_001),
- PINMUX_DATA(TCLKD_MARK, PE2MD_010),
- PINMUX_DATA(IOIS16_MARK, PE2MD_011),
- PINMUX_DATA(DV_VSYNC_MARK, PE2MD_100),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(TCLKB_MARK, PE1MD_010),
- PINMUX_DATA(AUDIO_CLK_MARK, PE1MD_010),
- PINMUX_DATA(DV_CLK_MARK, PE1MD_100),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(TCLKA_MARK, PE0MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF23_DATA, PF23MD_000),
- PINMUX_DATA(SD_D2_MARK, PF23MD_001),
- PINMUX_DATA(TXD3_MARK, PF23MD_100),
- PINMUX_DATA(MMC_D2_MARK, PF23MD_101),
-
- PINMUX_DATA(PF22_DATA, PF22MD_000),
- PINMUX_DATA(SD_D3_MARK, PF22MD_001),
- PINMUX_DATA(RXD3_MARK, PF22MD_100),
- PINMUX_DATA(MMC_D3_MARK, PF22MD_101),
-
- PINMUX_DATA(PF21_DATA, PF21MD_000),
- PINMUX_DATA(SD_CMD_MARK, PF21MD_001),
- PINMUX_DATA(SCK3_MARK, PF21MD_100),
- PINMUX_DATA(MMC_CMD_MARK, PF21MD_101),
-
- PINMUX_DATA(PF20_DATA, PF20MD_000),
- PINMUX_DATA(SD_CLK_MARK, PF20MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF20MD_010),
- PINMUX_DATA(MMC_CLK_MARK, PF20MD_101),
-
- PINMUX_DATA(PF19_DATA, PF19MD_000),
- PINMUX_DATA(SD_D0_MARK, PF19MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF19MD_010),
- PINMUX_DATA(IRQ7_PF_MARK, PF19MD_100),
- PINMUX_DATA(MMC_D0_MARK, PF19MD_101),
-
- PINMUX_DATA(PF18_DATA, PF18MD_000),
- PINMUX_DATA(SD_D1_MARK, PF18MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF18MD_010),
- PINMUX_DATA(IRQ6_PF_MARK, PF18MD_100),
- PINMUX_DATA(MMC_D1_MARK, PF18MD_101),
-
- PINMUX_DATA(PF17_DATA, PF17MD_000),
- PINMUX_DATA(SD_WP_MARK, PF17MD_001),
- PINMUX_DATA(FRB_MARK, PF17MD_011),
- PINMUX_DATA(IRQ5_PF_MARK, PF17MD_100),
-
- PINMUX_DATA(PF16_DATA, PF16MD_000),
- PINMUX_DATA(SD_CD_MARK, PF16MD_001),
- PINMUX_DATA(FCE_MARK, PF16MD_011),
- PINMUX_DATA(IRQ4_PF_MARK, PF16MD_100),
- PINMUX_DATA(MMC_CD_MARK, PF16MD_101),
-
- PINMUX_DATA(PF15_DATA, PF15MD_000),
- PINMUX_DATA(A0_MARK, PF15MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF15MD_010),
- PINMUX_DATA(WDTOVF_MARK, PF15MD_011),
- PINMUX_DATA(TXD2_MARK, PF15MD_100),
-
- PINMUX_DATA(PF14_DATA, PF14MD_000),
- PINMUX_DATA(A25_MARK, PF14MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF14MD_010),
- PINMUX_DATA(RXD2_MARK, PF14MD_100),
-
- PINMUX_DATA(PF13_DATA, PF13MD_000),
- PINMUX_DATA(A24_MARK, PF13MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF13MD_010),
- PINMUX_DATA(SCK2_MARK, PF13MD_100),
-
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(SSIDATA1_MARK, PF12MD_010),
- PINMUX_DATA(DV_DATA12_MARK, PF12MD_011),
- PINMUX_DATA(TXD1_MARK, PF12MD_100),
- PINMUX_DATA(MMC_D7_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(SSIWS1_MARK, PF11MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF11MD_011),
- PINMUX_DATA(RXD1_MARK, PF11MD_100),
- PINMUX_DATA(MMC_D6_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(CS1_MARK, PF10MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF10MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF10MD_011),
- PINMUX_DATA(SCK1_MARK, PF10MD_100),
- PINMUX_DATA(MMC_D5_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(BS_MARK, PF9MD_001),
- PINMUX_DATA(DV_DATA0_MARK, PF9MD_011),
- PINMUX_DATA(SCK0_MARK, PF9MD_100),
- PINMUX_DATA(MMC_D4_MARK, PF9MD_101),
- PINMUX_DATA(RTS1_MARK, PF9MD_110),
-
- PINMUX_DATA(PF8_DATA, PF8MD_000),
- PINMUX_DATA(A23_MARK, PF8MD_001),
- PINMUX_DATA(TXD0_MARK, PF8MD_100),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(SSIRXD0_MARK, PF7MD_010),
- PINMUX_DATA(RXD0_MARK, PF7MD_100),
- PINMUX_DATA(CTS1_MARK, PF7MD_110),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CE2A_MARK, PF6MD_001),
- PINMUX_DATA(SSITXD0_MARK, PF6MD_010),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(SSIWS0_MARK, PF5MD_010),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF4MD_001),
- PINMUX_DATA(SSISCK0_MARK, PF4MD_010),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(CS2_MARK, PF3MD_001),
- PINMUX_DATA(MISO1_MARK, PF3MD_011),
- PINMUX_DATA(TIOC4D_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(WAIT_MARK, PF2MD_001),
- PINMUX_DATA(MOSI1_MARK, PF2MD_011),
- PINMUX_DATA(TIOC4C_MARK, PF2MD_100),
- PINMUX_DATA(TEND0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BACK_MARK, PF1MD_001),
- PINMUX_DATA(SSL10_MARK, PF1MD_011),
- PINMUX_DATA(TIOC4B_MARK, PF1MD_100),
- PINMUX_DATA(DACK0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(BREQ_MARK, PF0MD_001),
- PINMUX_DATA(RSPCK1_MARK, PF0MD_011),
- PINMUX_DATA(TIOC4A_MARK, PF0MD_100),
- PINMUX_DATA(DREQ0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG27_DATA, PG27MD_00),
- PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11),
- PINMUX_DATA(LCD_DE_MARK, PG27MD_11),
-
- PINMUX_DATA(PG26_DATA, PG26MD_00),
- PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10),
- PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10),
-
- PINMUX_DATA(PG25_DATA, PG25MD_00),
- PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10),
- PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10),
-
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(LCD_CLK_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_000),
- PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011),
- PINMUX_DATA(TXD5_MARK, PG23MD_100),
-
- PINMUX_DATA(PG22_DATA, PG22MD_000),
- PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011),
- PINMUX_DATA(RXD5_MARK, PG22MD_100),
-
- PINMUX_DATA(PG21_DATA, PG21MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PG21MD_001),
- PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011),
- PINMUX_DATA(TXD4_MARK, PG21MD_100),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PG20MD_001),
- PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011),
- PINMUX_DATA(RXD4_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PG19MD_001),
- PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010),
- PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011),
- PINMUX_DATA(SCK5_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PG18MD_001),
- PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010),
- PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011),
- PINMUX_DATA(SCK4_MARK, PG18MD_100),
-
-// TODO hardware manual has PG17 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG17_DATA, PG17MD_00),
- PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01),
- PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10),
-
-// TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG16_DATA, PG16MD_00),
- PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01),
- PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10),
-
- PINMUX_DATA(PG15_DATA, PG15MD_00),
- PINMUX_DATA(D31_MARK, PG15MD_01),
- PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG15MD_11),
-
- PINMUX_DATA(PG14_DATA, PG14MD_00),
- PINMUX_DATA(D30_MARK, PG14MD_01),
- PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG14MD_11),
-
- PINMUX_DATA(PG13_DATA, PG13MD_00),
- PINMUX_DATA(D29_MARK, PG13MD_01),
- PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG13MD_11),
-
- PINMUX_DATA(PG12_DATA, PG12MD_00),
- PINMUX_DATA(D28_MARK, PG12MD_01),
- PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG12MD_11),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(D27_MARK, PG11MD_001),
- PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010),
- PINMUX_DATA(PINT3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TIOC3D_MARK, PG11MD_100),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(D26_MARK, PG10MD_001),
- PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010),
- PINMUX_DATA(PINT2_PG_MARK, PG10MD_011),
- PINMUX_DATA(TIOC3C_MARK, PG10MD_100),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(D25_MARK, PG9MD_001),
- PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010),
- PINMUX_DATA(PINT1_PG_MARK, PG9MD_011),
- PINMUX_DATA(TIOC3B_MARK, PG9MD_100),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(D24_MARK, PG8MD_001),
- PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG8MD_011),
- PINMUX_DATA(TIOC3A_MARK, PG8MD_100),
-
- PINMUX_DATA(PG7_DATA, PG7MD_000),
- PINMUX_DATA(D23_MARK, PG7MD_001),
- PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010),
- PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011),
- PINMUX_DATA(TIOC2B_MARK, PG7MD_100),
-
- PINMUX_DATA(PG6_DATA, PG6MD_000),
- PINMUX_DATA(D22_MARK, PG6MD_001),
- PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010),
- PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011),
- PINMUX_DATA(TIOC2A_MARK, PG6MD_100),
-
- PINMUX_DATA(PG5_DATA, PG5MD_000),
- PINMUX_DATA(D21_MARK, PG5MD_001),
- PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010),
- PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011),
- PINMUX_DATA(TIOC1B_MARK, PG5MD_100),
-
- PINMUX_DATA(PG4_DATA, PG4MD_000),
- PINMUX_DATA(D20_MARK, PG4MD_001),
- PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010),
- PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011),
- PINMUX_DATA(TIOC1A_MARK, PG4MD_100),
-
- PINMUX_DATA(PG3_DATA, PG3MD_000),
- PINMUX_DATA(D19_MARK, PG3MD_001),
- PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011),
- PINMUX_DATA(TIOC0D_MARK, PG3MD_100),
-
- PINMUX_DATA(PG2_DATA, PG2MD_000),
- PINMUX_DATA(D18_MARK, PG2MD_001),
- PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011),
- PINMUX_DATA(TIOC0C_MARK, PG2MD_100),
-
- PINMUX_DATA(PG1_DATA, PG1MD_000),
- PINMUX_DATA(D17_MARK, PG1MD_001),
- PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010),
- PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011),
- PINMUX_DATA(TIOC0B_MARK, PG1MD_100),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(D16_MARK, PG0MD_001),
- PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010),
- PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011),
- PINMUX_DATA(TIOC0A_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_00),
- PINMUX_DATA(PHAN7_MARK, PH7MD_01),
- PINMUX_DATA(PINT7_PH_MARK, PH7MD_10),
-
- PINMUX_DATA(PH6_DATA, PH6MD_00),
- PINMUX_DATA(PHAN6_MARK, PH6MD_01),
- PINMUX_DATA(PINT6_PH_MARK, PH6MD_10),
-
- PINMUX_DATA(PH5_DATA, PH5MD_00),
- PINMUX_DATA(PHAN5_MARK, PH5MD_01),
- PINMUX_DATA(PINT5_PH_MARK, PH5MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PH5MD_11),
-
- PINMUX_DATA(PH4_DATA, PH4MD_00),
- PINMUX_DATA(PHAN4_MARK, PH4MD_01),
- PINMUX_DATA(PINT4_PH_MARK, PH4MD_10),
-
- PINMUX_DATA(PH3_DATA, PH3MD_00),
- PINMUX_DATA(PHAN3_MARK, PH3MD_01),
- PINMUX_DATA(PINT3_PH_MARK, PH3MD_10),
-
- PINMUX_DATA(PH2_DATA, PH2MD_00),
- PINMUX_DATA(PHAN2_MARK, PH2MD_01),
- PINMUX_DATA(PINT2_PH_MARK, PH2MD_10),
-
- PINMUX_DATA(PH1_DATA, PH1MD_00),
- PINMUX_DATA(PHAN1_MARK, PH1MD_01),
- PINMUX_DATA(PINT1_PH_MARK, PH1MD_10),
-
- PINMUX_DATA(PH0_DATA, PH0MD_00),
- PINMUX_DATA(PHAN0_MARK, PH0MD_01),
- PINMUX_DATA(PINT0_PH_MARK, PH0MD_10),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ31_DATA, PJ31MD_0),
- PINMUX_DATA(DV_CLK_MARK, PJ31MD_1),
-
- PINMUX_DATA(PJ30_DATA, PJ30MD_000),
- PINMUX_DATA(SSIDATA5_MARK, PJ30MD_010),
- PINMUX_DATA(TIOC2B_MARK, PJ30MD_100),
- PINMUX_DATA(IETXD_MARK, PJ30MD_101),
-
- PINMUX_DATA(PJ29_DATA, PJ29MD_000),
- PINMUX_DATA(SSIWS5_MARK, PJ29MD_010),
- PINMUX_DATA(TIOC2A_MARK, PJ29MD_100),
- PINMUX_DATA(IERXD_MARK, PJ29MD_101),
-
- PINMUX_DATA(PJ28_DATA, PJ28MD_000),
- PINMUX_DATA(SSISCK5_MARK, PJ28MD_010),
- PINMUX_DATA(TIOC1B_MARK, PJ28MD_100),
- PINMUX_DATA(RTS7_MARK, PJ28MD_101),
-
- PINMUX_DATA(PJ27_DATA, PJ27MD_000),
- PINMUX_DATA(TIOC1A_MARK, PJ27MD_100),
- PINMUX_DATA(CTS7_MARK, PJ27MD_101),
-
- PINMUX_DATA(PJ26_DATA, PJ26MD_000),
- PINMUX_DATA(SSIDATA4_MARK, PJ26MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ26MD_011),
- PINMUX_DATA(TXD7_MARK, PJ26MD_101),
-
- PINMUX_DATA(PJ25_DATA, PJ25MD_000),
- PINMUX_DATA(SSIWS4_MARK, PJ25MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ25MD_011),
- PINMUX_DATA(SPDIF_OUT_MARK, PJ25MD_100),
- PINMUX_DATA(RXD7_MARK, PJ25MD_101),
-
- PINMUX_DATA(PJ24_DATA, PJ24MD_000),
- PINMUX_DATA(SSISCK4_MARK, PJ24MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ24MD_011),
- PINMUX_DATA(SPDIF_IN_MARK, PJ24MD_100),
- PINMUX_DATA(SCK7_MARK, PJ24MD_101),
-
- PINMUX_DATA(PJ23_DATA, PJ23MD_000),
- PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001),
- PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
- PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
- PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
- PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
-
- PINMUX_DATA(PJ22_DATA, PJ22MD_000),
- PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
- PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
- PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
- PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
- PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
-
- PINMUX_DATA(PJ21_DATA, PJ21MD_000),
- PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
- PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
- PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
- PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
-
- PINMUX_DATA(PJ20_DATA, PJ20MD_000),
- PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
- PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
- PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
- PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
-
- PINMUX_DATA(PJ19_DATA, PJ19MD_000),
- PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
- PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010),
- PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011),
- PINMUX_DATA(TIOC0D_MARK, PJ19MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101),
- PINMUX_DATA(AUDIO_XOUT_MARK, PJ19MD_110),
-
- PINMUX_DATA(PJ18_DATA, PJ18MD_000),
- PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001),
- PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010),
- PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011),
- PINMUX_DATA(TIOC0C_MARK, PJ18MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101),
-
- PINMUX_DATA(PJ17_DATA, PJ17MD_000),
- PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001),
- PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010),
- PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011),
- PINMUX_DATA(TIOC0B_MARK, PJ17MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101),
-
- PINMUX_DATA(PJ16_DATA, PJ16MD_000),
- PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001),
- PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010),
- PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011),
- PINMUX_DATA(TIOC0A_MARK, PJ16MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101),
-
- PINMUX_DATA(PJ15_DATA, PJ15MD_000),
- PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001),
- PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010),
- PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011),
- PINMUX_DATA(PWM2H_MARK, PJ15MD_100),
- PINMUX_DATA(TXD7_MARK, PJ15MD_101),
-
- PINMUX_DATA(PJ14_DATA, PJ14MD_000),
- PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001),
- PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010),
- PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011),
- PINMUX_DATA(PWM2G_MARK, PJ14MD_100),
- PINMUX_DATA(TXD6_MARK, PJ14MD_101),
-
- PINMUX_DATA(PJ13_DATA, PJ13MD_000),
- PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001),
- PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010),
- PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011),
- PINMUX_DATA(PWM2F_MARK, PJ13MD_100),
- PINMUX_DATA(TXD5_MARK, PJ13MD_101),
-
- PINMUX_DATA(PJ12_DATA, PJ12MD_000),
- PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001),
- PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010),
- PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011),
- PINMUX_DATA(PWM2E_MARK, PJ12MD_100),
- PINMUX_DATA(SCK7_MARK, PJ12MD_101),
-
- PINMUX_DATA(PJ11_DATA, PJ11MD_000),
- PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001),
- PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010),
- PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011),
- PINMUX_DATA(PWM2D_MARK, PJ11MD_100),
- PINMUX_DATA(SCK6_MARK, PJ11MD_101),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_000),
- PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001),
- PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010),
- PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011),
- PINMUX_DATA(PWM2C_MARK, PJ10MD_100),
- PINMUX_DATA(SCK5_MARK, PJ10MD_101),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_000),
- PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001),
- PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010),
- PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011),
- PINMUX_DATA(PWM2B_MARK, PJ9MD_100),
- PINMUX_DATA(RTS5_MARK, PJ9MD_101),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_000),
- PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001),
- PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010),
- PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011),
- PINMUX_DATA(PWM2A_MARK, PJ8MD_100),
- PINMUX_DATA(CTS5_MARK, PJ8MD_101),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001),
- PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010),
- PINMUX_DATA(SD_D2_MARK, PJ7MD_011),
- PINMUX_DATA(PWM1H_MARK, PJ7MD_100),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001),
- PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010),
- PINMUX_DATA(SD_D3_MARK, PJ6MD_011),
- PINMUX_DATA(PWM1G_MARK, PJ6MD_100),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001),
- PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010),
- PINMUX_DATA(SD_CMD_MARK, PJ5MD_011),
- PINMUX_DATA(PWM1F_MARK, PJ5MD_100),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001),
- PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010),
- PINMUX_DATA(SD_CLK_MARK, PJ4MD_011),
- PINMUX_DATA(PWM1E_MARK, PJ4MD_100),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_000),
- PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001),
- PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010),
- PINMUX_DATA(SD_D0_MARK, PJ3MD_011),
- PINMUX_DATA(PWM1D_MARK, PJ3MD_100),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001),
- PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010),
- PINMUX_DATA(SD_D1_MARK, PJ2MD_011),
- PINMUX_DATA(PWM1C_MARK, PJ2MD_100),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001),
- PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010),
- PINMUX_DATA(SD_WP_MARK, PJ1MD_011),
- PINMUX_DATA(PWM1B_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001),
- PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010),
- PINMUX_DATA(SD_CD_MARK, PJ0MD_011),
- PINMUX_DATA(PWM1A_MARK, PJ0MD_100),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG27),
- PINMUX_GPIO(PG26),
- PINMUX_GPIO(PG25),
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ31),
- PINMUX_GPIO(PJ30),
- PINMUX_GPIO(PJ29),
- PINMUX_GPIO(PJ28),
- PINMUX_GPIO(PJ27),
- PINMUX_GPIO(PJ26),
- PINMUX_GPIO(PJ25),
- PINMUX_GPIO(PJ24),
- PINMUX_GPIO(PJ23),
- PINMUX_GPIO(PJ22),
- PINMUX_GPIO(PJ21),
- PINMUX_GPIO(PJ20),
- PINMUX_GPIO(PJ19),
- PINMUX_GPIO(PJ18),
- PINMUX_GPIO(PJ17),
- PINMUX_GPIO(PJ16),
- PINMUX_GPIO(PJ15),
- PINMUX_GPIO(PJ14),
- PINMUX_GPIO(PJ13),
- PINMUX_GPIO(PJ12),
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(IRQ7_PG),
- GPIO_FN(IRQ6_PG),
- GPIO_FN(IRQ5_PG),
- GPIO_FN(IRQ4_PG),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PG),
- GPIO_FN(IRQ0_PG),
- GPIO_FN(IRQ7_PF),
- GPIO_FN(IRQ6_PF),
- GPIO_FN(IRQ5_PF),
- GPIO_FN(IRQ4_PF),
- GPIO_FN(IRQ3_PJ),
- GPIO_FN(IRQ2_PJ),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ1_PC),
- GPIO_FN(IRQ0_PC),
-
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
- GPIO_FN(PINT0_PG),
- GPIO_FN(PINT7_PH),
- GPIO_FN(PINT6_PH),
- GPIO_FN(PINT5_PH),
- GPIO_FN(PINT4_PH),
- GPIO_FN(PINT3_PH),
- GPIO_FN(PINT2_PH),
- GPIO_FN(PINT1_PH),
- GPIO_FN(PINT0_PH),
- GPIO_FN(PINT7_PJ),
- GPIO_FN(PINT6_PJ),
- GPIO_FN(PINT5_PJ),
- GPIO_FN(PINT4_PJ),
- GPIO_FN(PINT3_PJ),
- GPIO_FN(PINT2_PJ),
- GPIO_FN(PINT1_PJ),
- GPIO_FN(PINT0_PJ),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX2),
- GPIO_FN(CRX2),
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CRX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0_CRX1),
- GPIO_FN(CTX0_CTX1_CTX2),
- GPIO_FN(CRX0_CRX1_CRX2),
- GPIO_FN(CTX2_PJ21),
- GPIO_FN(CRX2_PJ20),
- GPIO_FN(CTX1_PJ23),
- GPIO_FN(CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_PJ23),
- GPIO_FN(CRX0_CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_CTX2_PJ21),
- GPIO_FN(CRX0_CRX1_CRX2_PJ20),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(WE3ICIOWRAHDQMUU),
- GPIO_FN(WE2ICIORDDQMUL),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(SCK0),
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK1),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
- GPIO_FN(SCK2),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK4),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(SCK5),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(RTS5),
- GPIO_FN(CTS5),
- GPIO_FN(SCK6),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(SCK7),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS7),
- GPIO_FN(CTS7),
-
- /* RSPI */
- GPIO_FN(RSPCK0_PJ16),
- GPIO_FN(SSL00_PJ17),
- GPIO_FN(MOSI0_PJ18),
- GPIO_FN(MISO0_PJ19),
- GPIO_FN(RSPCK0_PB17),
- GPIO_FN(SSL00_PB18),
- GPIO_FN(MOSI0_PB19),
- GPIO_FN(MISO0_PB20),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(AUDIO_XOUT),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA23),
- GPIO_FN(DV_DATA22),
- GPIO_FN(DV_DATA21),
- GPIO_FN(DV_DATA20),
- GPIO_FN(DV_DATA19),
- GPIO_FN(DV_DATA18),
- GPIO_FN(DV_DATA17),
- GPIO_FN(DV_DATA16),
- GPIO_FN(DV_DATA15),
- GPIO_FN(DV_DATA14),
- GPIO_FN(DV_DATA13),
- GPIO_FN(DV_DATA12),
- GPIO_FN(DV_DATA11),
- GPIO_FN(DV_DATA10),
- GPIO_FN(DV_DATA9),
- GPIO_FN(DV_DATA8),
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA23_PG23),
- GPIO_FN(LCD_DATA22_PG22),
- GPIO_FN(LCD_DATA21_PG21),
- GPIO_FN(LCD_DATA20_PG20),
- GPIO_FN(LCD_DATA19_PG19),
- GPIO_FN(LCD_DATA18_PG18),
- GPIO_FN(LCD_DATA17_PG17),
- GPIO_FN(LCD_DATA16_PG16),
- GPIO_FN(LCD_DATA15_PG15),
- GPIO_FN(LCD_DATA14_PG14),
- GPIO_FN(LCD_DATA13_PG13),
- GPIO_FN(LCD_DATA12_PG12),
- GPIO_FN(LCD_DATA11_PG11),
- GPIO_FN(LCD_DATA10_PG10),
- GPIO_FN(LCD_DATA9_PG9),
- GPIO_FN(LCD_DATA8_PG8),
- GPIO_FN(LCD_DATA7_PG7),
- GPIO_FN(LCD_DATA6_PG6),
- GPIO_FN(LCD_DATA5_PG5),
- GPIO_FN(LCD_DATA4_PG4),
- GPIO_FN(LCD_DATA3_PG3),
- GPIO_FN(LCD_DATA2_PG2),
- GPIO_FN(LCD_DATA1_PG1),
- GPIO_FN(LCD_DATA0_PG0),
-
- GPIO_FN(LCD_DATA23_PJ23),
- GPIO_FN(LCD_DATA22_PJ22),
- GPIO_FN(LCD_DATA21_PJ21),
- GPIO_FN(LCD_DATA20_PJ20),
- GPIO_FN(LCD_DATA19_PJ19),
- GPIO_FN(LCD_DATA18_PJ18),
- GPIO_FN(LCD_DATA17_PJ17),
- GPIO_FN(LCD_DATA16_PJ16),
- GPIO_FN(LCD_DATA15_PJ15),
- GPIO_FN(LCD_DATA14_PJ14),
- GPIO_FN(LCD_DATA13_PJ13),
- GPIO_FN(LCD_DATA12_PJ12),
- GPIO_FN(LCD_DATA11_PJ11),
- GPIO_FN(LCD_DATA10_PJ10),
- GPIO_FN(LCD_DATA9_PJ9),
- GPIO_FN(LCD_DATA8_PJ8),
- GPIO_FN(LCD_DATA7_PJ7),
- GPIO_FN(LCD_DATA6_PJ6),
- GPIO_FN(LCD_DATA5_PJ5),
- GPIO_FN(LCD_DATA4_PJ4),
- GPIO_FN(LCD_DATA3_PJ3),
- GPIO_FN(LCD_DATA2_PJ2),
- GPIO_FN(LCD_DATA1_PJ1),
- GPIO_FN(LCD_DATA0_PJ0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- /* "name" addr register_size Field_Width */
-
- /* where Field_Width is 1 for single mode registers or 4 for up to 16
- * mode registers and modes are described in assending order [0..15]
- */
-
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-7, 1, -7, 1),
- GROUP(
- /* RESERVED [7] */
- PA1_IN, PA1_OUT,
- /* RESERVED [7] */
- PA0_IN, PA0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG("PECR1", 0xfffe388c, 16, 4, GROUP(
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG("PFCR6", 0xfffe38a2, 16, 4, GROUP(
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR5", 0xfffe38a4, 16, 4, GROUP(
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR4", 0xfffe38a6, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PFIOR1", 0xfffe38b0, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG("PGCR6", 0xfffe38c2, 16, 4, GROUP(
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR0", 0xfffe38ce, 16, 4, GROUP(
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGIOR1", 0xfffe38d0, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG27_IN, PG27_OUT,
- PG26_IN, PG26_OUT,
- PG25_IN, PG25_OUT,
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR7", 0xfffe3900, 16, 4, GROUP(
- PJ31MD_0, PJ31MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR6", 0xfffe3902, 16, 4, GROUP(
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR5", 0xfffe3904, 16, 4, GROUP(
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR4", 0xfffe3906, 16, 4, GROUP(
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR3", 0xfffe3908, 16, 4, GROUP(
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJIOR1", 0xfffe3910, 16, 1, GROUP(
- PJ31_IN, PJ31_OUT,
- PJ30_IN, PJ30_OUT,
- PJ29_IN, PJ29_OUT,
- PJ28_IN, PJ28_OUT,
- PJ27_IN, PJ27_OUT,
- PJ26_IN, PJ26_OUT,
- PJ25_IN, PJ25_OUT,
- PJ24_IN, PJ24_OUT,
- PJ23_IN, PJ23_OUT,
- PJ22_IN, PJ22_OUT,
- PJ21_IN, PJ21_OUT,
- PJ20_IN, PJ20_OUT,
- PJ19_IN, PJ19_OUT,
- PJ18_IN, PJ18_OUT,
- PJ17_IN, PJ17_OUT,
- PJ16_IN, PJ16_OUT ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- PJ15_IN, PJ15_OUT,
- PJ14_IN, PJ14_OUT,
- PJ13_IN, PJ13_OUT,
- PJ12_IN, PJ12_OUT,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR1", 0xfffe38b4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0,
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
-
- { PINMUX_DATA_REG("PJDR1", 0xfffe3914, 16, GROUP(
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
-
- { }
-};
-
-const struct sh_pfc_soc_info sh7269_pinmux_info = {
- .name = "sh7269_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7720.c b/drivers/pinctrl/renesas/pfc-sh7720.c
deleted file mode 100644
index 6eedcc5bbb4d67..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7720.c
+++ /dev/null
@@ -1,1201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7720.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, PTL3_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTP4_DATA, PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN, PTL3_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTP4_IN, PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS4_IN, PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF0_OUT,
- PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT, PTL3_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTP4_OUT, PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS4_OUT, PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN, PTL3_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTP4_FN, PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS4_FN, PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV4_FN, PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
-
- PSELA_1_0_00, PSELA_1_0_01, PSELA_1_0_10,
- PSELA_3_2_00, PSELA_3_2_01, PSELA_3_2_10, PSELA_3_2_11,
- PSELA_5_4_00, PSELA_5_4_01, PSELA_5_4_10, PSELA_5_4_11,
- PSELA_7_6_00, PSELA_7_6_01, PSELA_7_6_10,
- PSELA_9_8_00, PSELA_9_8_01, PSELA_9_8_10,
- PSELA_11_10_00, PSELA_11_10_01, PSELA_11_10_10,
- PSELA_13_12_00, PSELA_13_12_10,
- PSELA_15_14_00, PSELA_15_14_10,
- PSELB_9_8_00, PSELB_9_8_11,
- PSELB_11_10_00, PSELB_11_10_01, PSELB_11_10_10, PSELB_11_10_11,
- PSELB_13_12_00, PSELB_13_12_01, PSELB_13_12_10, PSELB_13_12_11,
- PSELB_15_14_00, PSELB_15_14_11,
- PSELC_9_8_00, PSELC_9_8_10,
- PSELC_11_10_00, PSELC_11_10_10,
- PSELC_13_12_00, PSELC_13_12_01, PSELC_13_12_10,
- PSELC_15_14_00, PSELC_15_14_01, PSELC_15_14_10,
- PSELD_1_0_00, PSELD_1_0_10,
- PSELD_11_10_00, PSELD_11_10_01,
- PSELD_15_14_00, PSELD_15_14_01, PSELD_15_14_10,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, RAS_MARK, CAS_MARK, CKE_MARK,
- CS5B_CE1A_MARK, CS6B_CE1B_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, A20_MARK, A19_MARK, A0_MARK,
- REFOUT_MARK, IRQOUT_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK,
- LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK,
- LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK,
- LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK,
- LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- LCD_CL1_MARK, LCD_CL2_MARK,
- LCD_DON_MARK, LCD_FLM_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK,
- AFE_RXIN_MARK, AFE_RDET_MARK,
- AFE_FS_MARK, AFE_TXOUT_MARK,
- AFE_SCLK_MARK, AFE_RLYCNT_MARK,
- AFE_HC1_MARK,
- IIC_SCL_MARK, IIC_SDA_MARK,
- DA1_MARK, DA0_MARK,
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
- USB1D_RCV_MARK, USB1D_TXSE0_MARK,
- USB1D_TXDPLS_MARK, USB1D_DMNS_MARK,
- USB1D_DPLS_MARK, USB1D_SPEED_MARK,
- USB1D_TXENL_MARK,
- USB2_PWR_EN_MARK, USB1_PWR_EN_USBF_UPLUP_MARK, USB1D_SUSPEND_MARK,
- IRQ5_MARK, IRQ4_MARK,
- IRQ3_IRL3_MARK, IRQ2_IRL2_MARK,
- IRQ1_IRL1_MARK, IRQ0_IRL0_MARK,
- PCC_REG_MARK, PCC_DRV_MARK,
- PCC_BVD2_MARK, PCC_BVD1_MARK,
- PCC_CD2_MARK, PCC_CD1_MARK,
- PCC_RESET_MARK, PCC_RDY_MARK,
- PCC_VS2_MARK, PCC_VS1_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK, ASEBRKAK_MARK, TRST_MARK,
- TMS_MARK, TDO_MARK, TDI_MARK, TCK_MARK,
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, TEND0_MARK,
- SIOF0_SYNC_MARK, SIOF0_MCLK_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF0_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_MCLK_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIOF1_SCK_MARK,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- TPU_TO1_MARK, TPU_TO0_MARK,
- TPU_TI3B_MARK, TPU_TI3A_MARK,
- TPU_TI2B_MARK, TPU_TI2A_MARK,
- TPU_TO3_MARK, TPU_TO2_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- MMC_DAT_MARK, MMC_CMD_MARK,
- MMC_CLK_MARK, MMC_VDDON_MARK,
- MMC_ODMOD_MARK,
- STATUS0_MARK, STATUS1_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE6_DATA, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF6_DATA, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTP GPIO */
- PINMUX_DATA(PTP4_DATA, PTP4_IN, PTP4_OUT),
- PINMUX_DATA(PTP3_DATA, PTP3_IN, PTP3_OUT),
- PINMUX_DATA(PTP2_DATA, PTP2_IN, PTP2_OUT),
- PINMUX_DATA(PTP1_DATA, PTP1_IN, PTP1_OUT),
- PINMUX_DATA(PTP0_DATA, PTP0_IN, PTP0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PTA7_FN),
- PINMUX_DATA(D22_MARK, PTA6_FN),
- PINMUX_DATA(D21_MARK, PTA5_FN),
- PINMUX_DATA(D20_MARK, PTA4_FN),
- PINMUX_DATA(D19_MARK, PTA3_FN),
- PINMUX_DATA(D18_MARK, PTA2_FN),
- PINMUX_DATA(D17_MARK, PTA1_FN),
- PINMUX_DATA(D16_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PTB2_FN),
- PINMUX_DATA(D25_MARK, PTB1_FN),
- PINMUX_DATA(D24_MARK, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCD_DATA7_MARK, PTC7_FN),
- PINMUX_DATA(LCD_DATA6_MARK, PTC6_FN),
- PINMUX_DATA(LCD_DATA5_MARK, PTC5_FN),
- PINMUX_DATA(LCD_DATA4_MARK, PTC4_FN),
- PINMUX_DATA(LCD_DATA3_MARK, PTC3_FN),
- PINMUX_DATA(LCD_DATA2_MARK, PTC2_FN),
- PINMUX_DATA(LCD_DATA1_MARK, PTC1_FN),
- PINMUX_DATA(LCD_DATA0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCD_DATA15_MARK, PTD7_FN),
- PINMUX_DATA(LCD_DATA14_MARK, PTD6_FN),
- PINMUX_DATA(LCD_DATA13_MARK, PTD5_FN),
- PINMUX_DATA(LCD_DATA12_MARK, PTD4_FN),
- PINMUX_DATA(LCD_DATA11_MARK, PTD3_FN),
- PINMUX_DATA(LCD_DATA10_MARK, PTD2_FN),
- PINMUX_DATA(LCD_DATA9_MARK, PTD1_FN),
- PINMUX_DATA(LCD_DATA8_MARK, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(IIC_SCL_MARK, PSELB_9_8_00, PTE6_FN),
- PINMUX_DATA(AFE_RXIN_MARK, PSELB_9_8_11, PTE6_FN),
- PINMUX_DATA(IIC_SDA_MARK, PSELB_9_8_00, PTE5_FN),
- PINMUX_DATA(AFE_RDET_MARK, PSELB_9_8_11, PTE5_FN),
- PINMUX_DATA(LCD_M_DISP_MARK, PTE4_FN),
- PINMUX_DATA(LCD_CL1_MARK, PTE3_FN),
- PINMUX_DATA(LCD_CL2_MARK, PTE2_FN),
- PINMUX_DATA(LCD_DON_MARK, PTE1_FN),
- PINMUX_DATA(LCD_FLM_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(DA1_MARK, PTF6_FN),
- PINMUX_DATA(DA0_MARK, PTF5_FN),
- PINMUX_DATA(AN3_MARK, PTF4_FN),
- PINMUX_DATA(AN2_MARK, PTF3_FN),
- PINMUX_DATA(AN1_MARK, PTF2_FN),
- PINMUX_DATA(AN0_MARK, PTF1_FN),
- PINMUX_DATA(ADTRG_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(USB1D_RCV_MARK, PSELA_3_2_00, PTG6_FN),
- PINMUX_DATA(AFE_FS_MARK, PSELA_3_2_01, PTG6_FN),
- PINMUX_DATA(PCC_REG_MARK, PSELA_3_2_10, PTG6_FN),
- PINMUX_DATA(IRQ5_MARK, PSELA_3_2_11, PTG6_FN),
- PINMUX_DATA(USB1D_TXSE0_MARK, PSELA_5_4_00, PTG5_FN),
- PINMUX_DATA(AFE_TXOUT_MARK, PSELA_5_4_01, PTG5_FN),
- PINMUX_DATA(PCC_DRV_MARK, PSELA_5_4_10, PTG5_FN),
- PINMUX_DATA(IRQ4_MARK, PSELA_5_4_11, PTG5_FN),
- PINMUX_DATA(USB1D_TXDPLS_MARK, PSELA_7_6_00, PTG4_FN),
- PINMUX_DATA(AFE_SCLK_MARK, PSELA_7_6_01, PTG4_FN),
- PINMUX_DATA(IOIS16_MARK, PSELA_7_6_10, PTG4_FN),
- PINMUX_DATA(USB1D_DMNS_MARK, PSELA_9_8_00, PTG3_FN),
- PINMUX_DATA(AFE_RLYCNT_MARK, PSELA_9_8_01, PTG3_FN),
- PINMUX_DATA(PCC_BVD2_MARK, PSELA_9_8_10, PTG3_FN),
- PINMUX_DATA(USB1D_DPLS_MARK, PSELA_11_10_00, PTG2_FN),
- PINMUX_DATA(AFE_HC1_MARK, PSELA_11_10_01, PTG2_FN),
- PINMUX_DATA(PCC_BVD1_MARK, PSELA_11_10_10, PTG2_FN),
- PINMUX_DATA(USB1D_SPEED_MARK, PSELA_13_12_00, PTG1_FN),
- PINMUX_DATA(PCC_CD2_MARK, PSELA_13_12_10, PTG1_FN),
- PINMUX_DATA(USB1D_TXENL_MARK, PSELA_15_14_00, PTG0_FN),
- PINMUX_DATA(PCC_CD1_MARK, PSELA_15_14_10, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(RAS_MARK, PTH6_FN),
- PINMUX_DATA(CAS_MARK, PTH5_FN),
- PINMUX_DATA(CKE_MARK, PTH4_FN),
- PINMUX_DATA(STATUS1_MARK, PTH3_FN),
- PINMUX_DATA(STATUS0_MARK, PTH2_FN),
- PINMUX_DATA(USB2_PWR_EN_MARK, PTH1_FN),
- PINMUX_DATA(USB1_PWR_EN_USBF_UPLUP_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(AUDCK_MARK, PTJ6_FN),
- PINMUX_DATA(ASEBRKAK_MARK, PTJ5_FN),
- PINMUX_DATA(AUDATA3_MARK, PTJ4_FN),
- PINMUX_DATA(AUDATA2_MARK, PTJ3_FN),
- PINMUX_DATA(AUDATA1_MARK, PTJ2_FN),
- PINMUX_DATA(AUDATA0_MARK, PTJ1_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(PCC_RESET_MARK, PTK3_FN),
- PINMUX_DATA(PCC_RDY_MARK, PTK2_FN),
- PINMUX_DATA(PCC_VS2_MARK, PTK1_FN),
- PINMUX_DATA(PCC_VS1_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(TRST_MARK, PTL7_FN),
- PINMUX_DATA(TMS_MARK, PTL6_FN),
- PINMUX_DATA(TDO_MARK, PTL5_FN),
- PINMUX_DATA(TDI_MARK, PTL4_FN),
- PINMUX_DATA(TCK_MARK, PTL3_FN),
-
- /* PTM FN */
- PINMUX_DATA(DREQ1_MARK, PTM7_FN),
- PINMUX_DATA(DREQ0_MARK, PTM6_FN),
- PINMUX_DATA(DACK1_MARK, PTM5_FN),
- PINMUX_DATA(DACK0_MARK, PTM4_FN),
- PINMUX_DATA(TEND1_MARK, PTM3_FN),
- PINMUX_DATA(TEND0_MARK, PTM2_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTM1_FN),
- PINMUX_DATA(CS6B_CE1B_MARK, PTM0_FN),
-
- /* PTP FN */
- PINMUX_DATA(USB1D_SUSPEND_MARK, PSELA_1_0_00, PTP4_FN),
- PINMUX_DATA(REFOUT_MARK, PSELA_1_0_01, PTP4_FN),
- PINMUX_DATA(IRQOUT_MARK, PSELA_1_0_10, PTP4_FN),
- PINMUX_DATA(IRQ3_IRL3_MARK, PTP3_FN),
- PINMUX_DATA(IRQ2_IRL2_MARK, PTP2_FN),
- PINMUX_DATA(IRQ1_IRL1_MARK, PTP1_FN),
- PINMUX_DATA(IRQ0_IRL0_MARK, PTP0_FN),
-
- /* PTR FN */
- PINMUX_DATA(A25_MARK, PTR7_FN),
- PINMUX_DATA(A24_MARK, PTR6_FN),
- PINMUX_DATA(A23_MARK, PTR5_FN),
- PINMUX_DATA(A22_MARK, PTR4_FN),
- PINMUX_DATA(A21_MARK, PTR3_FN),
- PINMUX_DATA(A20_MARK, PTR2_FN),
- PINMUX_DATA(A19_MARK, PTR1_FN),
- PINMUX_DATA(A0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SIOF0_SYNC_MARK, PTS4_FN),
- PINMUX_DATA(SIOF0_MCLK_MARK, PTS3_FN),
- PINMUX_DATA(SIOF0_TXD_MARK, PTS2_FN),
- PINMUX_DATA(SIOF0_RXD_MARK, PTS1_FN),
- PINMUX_DATA(SIOF0_SCK_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_CTS_MARK, PSELB_15_14_00, PTT4_FN),
- PINMUX_DATA(TPU_TO1_MARK, PSELB_15_14_11, PTT4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, PSELB_15_14_00, PTT3_FN),
- PINMUX_DATA(TPU_TO0_MARK, PSELB_15_14_11, PTT3_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, PTT2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, PTT1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(SIOF1_SYNC_MARK, PTU4_FN),
- PINMUX_DATA(SIOF1_MCLK_MARK, PSELD_11_10_00, PTU3_FN),
- PINMUX_DATA(TPU_TI3B_MARK, PSELD_11_10_01, PTU3_FN),
- PINMUX_DATA(SIOF1_TXD_MARK, PSELD_15_14_00, PTU2_FN),
- PINMUX_DATA(TPU_TI3A_MARK, PSELD_15_14_01, PTU2_FN),
- PINMUX_DATA(MMC_DAT_MARK, PSELD_15_14_10, PTU2_FN),
- PINMUX_DATA(SIOF1_RXD_MARK, PSELC_13_12_00, PTU1_FN),
- PINMUX_DATA(TPU_TI2B_MARK, PSELC_13_12_01, PTU1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PSELC_13_12_10, PTU1_FN),
- PINMUX_DATA(SIOF1_SCK_MARK, PSELC_15_14_00, PTU0_FN),
- PINMUX_DATA(TPU_TI2A_MARK, PSELC_15_14_01, PTU0_FN),
- PINMUX_DATA(MMC_CLK_MARK, PSELC_15_14_10, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(SCIF1_CTS_MARK, PSELB_11_10_00, PTV4_FN),
- PINMUX_DATA(TPU_TO3_MARK, PSELB_11_10_01, PTV4_FN),
- PINMUX_DATA(MMC_VDDON_MARK, PSELB_11_10_10, PTV4_FN),
- PINMUX_DATA(LCD_VEPWC_MARK, PSELB_11_10_11, PTV4_FN),
- PINMUX_DATA(SCIF1_RTS_MARK, PSELB_13_12_00, PTV3_FN),
- PINMUX_DATA(TPU_TO2_MARK, PSELB_13_12_01, PTV3_FN),
- PINMUX_DATA(MMC_ODMOD_MARK, PSELB_13_12_10, PTV3_FN),
- PINMUX_DATA(LCD_VCPWC_MARK, PSELB_13_12_11, PTV3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSELC_9_8_00, PTV2_FN),
- PINMUX_DATA(SIM_D_MARK, PSELC_9_8_10, PTV2_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSELC_11_10_00, PTV1_FN),
- PINMUX_DATA(SIM_RST_MARK, PSELC_11_10_10, PTV1_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSELD_1_0_00, PTV0_FN),
- PINMUX_DATA(SIM_CLK_MARK, PSELD_1_0_10, PTV0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTP */
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A0),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT),
-
- /* LCDC */
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
-
- /* AFEIF */
- GPIO_FN(AFE_RXIN),
- GPIO_FN(AFE_RDET),
- GPIO_FN(AFE_FS),
- GPIO_FN(AFE_TXOUT),
- GPIO_FN(AFE_SCLK),
- GPIO_FN(AFE_RLYCNT),
- GPIO_FN(AFE_HC1),
-
- /* IIC */
- GPIO_FN(IIC_SCL),
- GPIO_FN(IIC_SDA),
-
- /* DAC */
- GPIO_FN(DA1),
- GPIO_FN(DA0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* USB */
- GPIO_FN(USB1D_RCV),
- GPIO_FN(USB1D_TXSE0),
- GPIO_FN(USB1D_TXDPLS),
- GPIO_FN(USB1D_DMNS),
- GPIO_FN(USB1D_DPLS),
- GPIO_FN(USB1D_SPEED),
- GPIO_FN(USB1D_TXENL),
-
- GPIO_FN(USB2_PWR_EN),
- GPIO_FN(USB1_PWR_EN_USBF_UPLUP),
- GPIO_FN(USB1D_SUSPEND),
-
- /* INTC */
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3_IRL3),
- GPIO_FN(IRQ2_IRL2),
- GPIO_FN(IRQ1_IRL1),
- GPIO_FN(IRQ0_IRL0),
-
- /* PCC */
- GPIO_FN(PCC_REG),
- GPIO_FN(PCC_DRV),
- GPIO_FN(PCC_BVD2),
- GPIO_FN(PCC_BVD1),
- GPIO_FN(PCC_CD2),
- GPIO_FN(PCC_CD1),
- GPIO_FN(PCC_RESET),
- GPIO_FN(PCC_RDY),
- GPIO_FN(PCC_VS2),
- GPIO_FN(PCC_VS1),
-
- /* HUDI */
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(ASEBRKAK),
- GPIO_FN(TRST),
- GPIO_FN(TMS),
- GPIO_FN(TDO),
- GPIO_FN(TDI),
- GPIO_FN(TCK),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(TEND0),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_MCLK),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
- GPIO_FN(SIOF0_SCK),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_MCLK),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
- GPIO_FN(SIOF1_SCK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* TPU */
- GPIO_FN(TPU_TO1),
- GPIO_FN(TPU_TO0),
- GPIO_FN(TPU_TI3B),
- GPIO_FN(TPU_TI3A),
- GPIO_FN(TPU_TI2B),
- GPIO_FN(TPU_TI2A),
- GPIO_FN(TPU_TO3),
- GPIO_FN(TPU_TO2),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* MMC */
- GPIO_FN(MMC_DAT),
- GPIO_FN(MMC_CMD),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_VDDON),
- GPIO_FN(MMC_ODMOD),
-
- /* SYSC */
- GPIO_FN(STATUS0),
- GPIO_FN(STATUS1),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTE6_FN, 0, 0, PTE6_IN,
- PTE5_FN, 0, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6_FN, 0, 0, PTF6_IN,
- PTF5_FN, 0, 0, PTF5_IN,
- PTF4_FN, 0, 0, PTF4_IN,
- PTF3_FN, 0, 0, PTF3_IN,
- PTF2_FN, 0, 0, PTF2_IN,
- PTF1_FN, 0, 0, PTF1_IN,
- PTF0_FN, 0, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTG6_FN, PTG6_OUT, 0, PTG6_IN,
- PTG5_FN, PTG5_OUT, 0, PTG5_IN,
- PTG4_FN, PTG4_OUT, 0, PTG4_IN,
- PTG3_FN, PTG3_OUT, 0, PTG3_IN,
- PTG2_FN, PTG2_OUT, 0, PTG2_IN,
- PTG1_FN, PTG1_OUT, 0, PTG1_IN,
- PTG0_FN, PTG0_OUT, 0, PTG0_IN ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, PTJ6_IN,
- PTJ5_FN, PTJ5_OUT, 0, PTJ5_IN,
- PTJ4_FN, PTJ4_OUT, 0, PTJ4_IN,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PKCR", 0xa4050112, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PLCR", 0xa4050114, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xa4050118, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTP4_FN, PTP4_OUT, 0, PTP4_IN,
- PTP3_FN, PTP3_OUT, 0, PTP3_IN,
- PTP2_FN, PTP2_OUT, 0, PTP2_IN,
- PTP1_FN, PTP1_OUT, 0, PTP1_IN,
- PTP0_FN, PTP0_OUT, 0, PTP0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011a, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, PTR3_OUT, 0, PTR3_IN,
- PTR2_FN, PTR2_OUT, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050120, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050122, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050140, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050142, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050144, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050148, 8, GROUP(
- 0, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405014a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405014c, 8, GROUP(
- 0, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405014e, 8, GROUP(
- 0, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050150, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050152, 8, GROUP(
- 0, 0, 0, 0,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050154, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050156, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xa4050158, 8, GROUP(
- 0, 0, 0, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405015a, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405015c, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa405015e, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7720_pinmux_info = {
- .name = "sh7720_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7722.c b/drivers/pinctrl/renesas/pfc-sh7722.c
deleted file mode 100644
index 4b82ac2c5e91d7..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7722.c
+++ /dev/null
@@ -1,1703 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <cpu/sh7722.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC5_DATA, PTC4_DATA, PTC3_DATA, PTC2_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR4_DATA, PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ5_DATA, PTZ4_DATA, PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC5_IN, PTC4_IN, PTC3_IN, PTC2_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN, PTD3_IN, PTD2_IN, PTD1_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN, PTF3_IN, PTF2_IN, PTF1_IN,
- PTH6_IN, PTH5_IN, PTH1_IN, PTH0_IN,
- PTJ1_IN, PTJ0_IN,
- PTK6_IN, PTK5_IN, PTK4_IN, PTK3_IN, PTK2_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ5_IN, PTQ4_IN, PTQ3_IN, PTQ2_IN, PTQ0_IN,
- PTR2_IN,
- PTS4_IN, PTS2_IN, PTS1_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW6_IN, PTW4_IN, PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX6_IN, PTX5_IN, PTX4_IN, PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY5_IN, PTY4_IN, PTY3_IN, PTY2_IN, PTY0_IN,
- PTZ5_IN, PTZ4_IN, PTZ3_IN, PTZ2_IN, PTZ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA5_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC4_OUT, PTC3_OUT, PTC2_OUT, PTC0_OUT,
- PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT, PTE1_OUT, PTE0_OUT,
- PTF6_OUT, PTF5_OUT, PTF4_OUT, PTF3_OUT, PTF2_OUT, PTF0_OUT,
- PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK6_OUT, PTK5_OUT, PTK4_OUT, PTK3_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR4_OUT, PTR3_OUT, PTR1_OUT, PTR0_OUT,
- PTS3_OUT, PTS2_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW5_OUT, PTW4_OUT, PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX6_OUT, PTX5_OUT, PTX4_OUT, PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY5_OUT, PTY4_OUT, PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- SCIF2_TXD_MARK, SCIF2_RXD_MARK,
- SCIF2_RTS_MARK, SCIF2_CTS_MARK, SCIF2_SCK_MARK,
- SIOTXD_MARK, SIORXD_MARK,
- SIOD_MARK, SIOSTRB0_MARK, SIOSTRB1_MARK,
- SIOSCK_MARK, SIOMCK_MARK,
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_CLK_MARK, VIO_VD_MARK, VIO_HD_MARK, VIO_FLD_MARK,
- VIO_CKO_MARK, VIO_STEX_MARK, VIO_STEM_MARK, VIO_VD2_MARK,
- VIO_HD2_MARK, VIO_CLK2_MARK,
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDLCLK_MARK, LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDDON2_MARK, LCDVCPWC2_MARK, LCDVEPWC2_MARK, LCDVSYN2_MARK,
- LCDCS2_MARK,
- IOIS16_MARK, A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- BS_MARK, CS6B_CE1B_MARK, WAIT_MARK, CS6A_CE2B_MARK,
- HPD63_MARK, HPD62_MARK, HPD61_MARK, HPD60_MARK,
- HPD59_MARK, HPD58_MARK, HPD57_MARK, HPD56_MARK,
- HPD55_MARK, HPD54_MARK, HPD53_MARK, HPD52_MARK,
- HPD51_MARK, HPD50_MARK, HPD49_MARK, HPD48_MARK,
- HPDQM7_MARK, HPDQM6_MARK, HPDQM5_MARK, HPDQM4_MARK,
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
- SDHICD_MARK, SDHIWP_MARK, SDHID3_MARK, SDHID2_MARK,
- SDHID1_MARK, SDHID0_MARK, SDHICMD_MARK, SDHICLK_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAISLD_MARK, SIUAILR_MARK,
- SIUAIBT_MARK, SIUAOSLD_MARK, SIUMCKA_MARK, SIUFCKA_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBISLD_MARK, SIUBILR_MARK,
- SIUBIBT_MARK, SIUBOSLD_MARK, SIUMCKB_MARK, SIUFCKB_MARK,
- AUDSYNC_MARK, AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- DACK_MARK, DREQ0_MARK,
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
- STATUS0_MARK, PDSTATUS_MARK,
- SIOF0_MCK_MARK, SIOF0_SCK_MARK,
- SIOF0_SYNC_MARK, SIOF0_SS1_MARK, SIOF0_SS2_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF1_MCK_MARK, SIOF1_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_SS1_MARK, SIOF1_SS2_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- TS_SDAT_MARK, TS_SCK_MARK, TS_SDEN_MARK, TS_SPSYNC_MARK,
- IRDA_IN_MARK, IRDA_OUT_MARK,
- TPUTO_MARK,
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
- PINMUX_MARK_END,
-
- PINMUX_FUNCTION_BEGIN,
- VIO_D7_SCIF1_SCK, VIO_D6_SCIF1_RXD, VIO_D5_SCIF1_TXD, VIO_D4,
- VIO_D3, VIO_D2, VIO_D1, VIO_D0_LCDLCLK,
- HPD55, HPD54, HPD53, HPD52, HPD51, HPD50, HPD49, HPD48,
- IOIS16, HPDQM7, HPDQM6, HPDQM5, HPDQM4,
- SDHICD, SDHIWP, SDHID3, IRQ2_SDHID2, SDHID1, SDHID0, SDHICMD, SDHICLK,
- A25, A24, A23, A22, IRQ5, IRQ4_BS,
- PTF6, SIOSCK_SIUBOBT, SIOSTRB1_SIUBOLR,
- SIOSTRB0_SIUBIBT, SIOD_SIUBILR, SIORXD_SIUBISLD, SIOTXD_SIUBOSLD,
- AUDSYNC, AUDATA3, AUDATA2, AUDATA1, AUDATA0,
- LCDVCPWC_LCDVCPWC2, LCDVSYN2_DACK, LCDVSYN, LCDDISP_LCDRS,
- LCDHSYN_LCDCS, LCDDON_LCDDON2, LCDD17_DV_HSYNC, LCDD16_DV_VSYNC,
- STATUS0, PDSTATUS, IRQ1, IRQ0,
- SIUAILR_SIOF1_SS2, SIUAIBT_SIOF1_SS1, SIUAOLR_SIOF1_SYNC,
- SIUAOBT_SIOF1_SCK, SIUAISLD_SIOF1_RXD, SIUAOSLD_SIOF1_TXD, PTK0,
- LCDD15_DV_D15, LCDD14_DV_D14, LCDD13_DV_D13, LCDD12_DV_D12,
- LCDD11_DV_D11, LCDD10_DV_D10, LCDD9_DV_D9, LCDD8_DV_D8,
- LCDD7_DV_D7, LCDD6_DV_D6, LCDD5_DV_D5, LCDD4_DV_D4,
- LCDD3_DV_D3, LCDD2_DV_D2, LCDD1_DV_D1, LCDD0_DV_D0,
- HPD63, HPD62, HPD61, HPD60, HPD59, HPD58, HPD57, HPD56,
- SIOF0_SS2_SIM_RST, SIOF0_SS1_TS_SPSYNC, SIOF0_SYNC_TS_SDEN,
- SIOF0_SCK_TS_SCK, PTQ2, PTQ1, PTQ0,
- LCDRD, CS6B_CE1B_LCDCS2, WAIT, LCDDCK_LCDWR, LCDVEPWC_LCDVEPWC2,
- SCIF0_CTS_SIUAISPD, SCIF0_RTS_SIUAOSPD,
- SCIF0_SCK_TPUTO, SCIF0_RXD, SCIF0_TXD,
- FOE_VIO_VD2, FWE, FSC, DREQ0, FCDE,
- NAF2_VIO_D10, NAF1_VIO_D9, NAF0_VIO_D8,
- FRB_VIO_CLK2, FCE_VIO_HD2,
- NAF7_VIO_D15, NAF6_VIO_D14, NAF5_VIO_D13, NAF4_VIO_D12, NAF3_VIO_D11,
- VIO_FLD_SCIF2_CTS, VIO_CKO_SCIF2_RTS, VIO_STEX_SCIF2_SCK,
- VIO_STEM_SCIF2_TXD, VIO_HD_SCIF2_RXD,
- VIO_VD_SCIF1_CTS, VIO_CLK_SCIF1_RTS,
- CS6A_CE2B, LCDD23, LCDD22, LCDD21, LCDD20,
- LCDD19_DV_CLKI, LCDD18_DV_CLK,
- KEYOUT5_IN5, KEYOUT4_IN6, KEYOUT3, KEYOUT2, KEYOUT1, KEYOUT0,
- KEYIN4_IRQ7, KEYIN3, KEYIN2, KEYIN1, KEYIN0_IRQ6,
-
- PSA15_KEYIN0, PSA15_IRQ6, PSA14_KEYIN4, PSA14_IRQ7,
- PSA9_IRQ4, PSA9_BS, PSA4_IRQ2, PSA4_SDHID2,
- PSB15_SIOTXD, PSB15_SIUBOSLD, PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR, PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR, PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB, PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT, PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK, PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC, PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK, PSB0_SIUAOSLD, PSB0_SIOF1_TXD,
- PSC15_SIUAISLD, PSC15_SIOF1_RXD, PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC, PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2, PSC0_NAF, PSC0_VIO,
- PSD13_VIO, PSD13_SCIF2, PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1, PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB, PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD, PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2, PSD0_LCDD19_LCDD0, PSD0_DV,
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT, PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- PSE3_FLCTL, PSE3_VIO, PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9, PSE0_NAF0, PSE0_VIO_D8,
-
- HIZA14_KEYSC, HIZA14_HIZ,
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- HIZB4_SIUA, HIZB4_HIZ,
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ,
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- PINMUX_FUNCTION_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN),
- PINMUX_DATA(PTA3_DATA, PTA3_IN),
- PINMUX_DATA(PTA2_DATA, PTA2_IN),
- PINMUX_DATA(PTA1_DATA, PTA1_IN),
- PINMUX_DATA(PTA0_DATA, PTA0_IN),
-
- /* PTB */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC */
- PINMUX_DATA(PTC7_DATA, PTC7_IN),
- PINMUX_DATA(PTC5_DATA, PTC5_IN),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD */
- PINMUX_DATA(PTD7_DATA, PTD7_IN),
- PINMUX_DATA(PTD6_DATA, PTD6_OUT, PTD6_IN),
- PINMUX_DATA(PTD5_DATA, PTD5_OUT, PTD5_IN),
- PINMUX_DATA(PTD4_DATA, PTD4_OUT, PTD4_IN),
- PINMUX_DATA(PTD3_DATA, PTD3_OUT, PTD3_IN),
- PINMUX_DATA(PTD2_DATA, PTD2_OUT, PTD2_IN),
- PINMUX_DATA(PTD1_DATA, PTD1_OUT, PTD1_IN),
- PINMUX_DATA(PTD0_DATA, PTD0_OUT),
-
- /* PTE */
- PINMUX_DATA(PTE7_DATA, PTE7_OUT, PTE7_IN),
- PINMUX_DATA(PTE6_DATA, PTE6_OUT, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_OUT, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_OUT, PTE4_IN),
- PINMUX_DATA(PTE1_DATA, PTE1_OUT, PTE1_IN),
- PINMUX_DATA(PTE0_DATA, PTE0_OUT, PTE0_IN),
-
- /* PTF */
- PINMUX_DATA(PTF6_DATA, PTF6_OUT, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_OUT, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_OUT, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_OUT, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_OUT, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_OUT),
-
- /* PTG */
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH */
- PINMUX_DATA(PTH7_DATA, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_OUT, PTH6_IN),
- PINMUX_DATA(PTH5_DATA, PTH5_OUT, PTH5_IN),
- PINMUX_DATA(PTH4_DATA, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_OUT, PTH1_IN),
- PINMUX_DATA(PTH0_DATA, PTH0_OUT, PTH0_IN),
-
- /* PTJ */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_OUT, PTJ1_IN),
- PINMUX_DATA(PTJ0_DATA, PTJ0_OUT, PTJ0_IN),
-
- /* PTK */
- PINMUX_DATA(PTK6_DATA, PTK6_OUT, PTK6_IN),
- PINMUX_DATA(PTK5_DATA, PTK5_OUT, PTK5_IN),
- PINMUX_DATA(PTK4_DATA, PTK4_OUT, PTK4_IN),
- PINMUX_DATA(PTK3_DATA, PTK3_OUT, PTK3_IN),
- PINMUX_DATA(PTK2_DATA, PTK2_IN),
- PINMUX_DATA(PTK1_DATA, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_OUT, PTK0_IN),
-
- /* PTL */
- PINMUX_DATA(PTL7_DATA, PTL7_OUT, PTL7_IN),
- PINMUX_DATA(PTL6_DATA, PTL6_OUT, PTL6_IN),
- PINMUX_DATA(PTL5_DATA, PTL5_OUT, PTL5_IN),
- PINMUX_DATA(PTL4_DATA, PTL4_OUT, PTL4_IN),
- PINMUX_DATA(PTL3_DATA, PTL3_OUT, PTL3_IN),
- PINMUX_DATA(PTL2_DATA, PTL2_OUT, PTL2_IN),
- PINMUX_DATA(PTL1_DATA, PTL1_OUT, PTL1_IN),
- PINMUX_DATA(PTL0_DATA, PTL0_OUT, PTL0_IN),
-
- /* PTM */
- PINMUX_DATA(PTM7_DATA, PTM7_OUT, PTM7_IN),
- PINMUX_DATA(PTM6_DATA, PTM6_OUT, PTM6_IN),
- PINMUX_DATA(PTM5_DATA, PTM5_OUT, PTM5_IN),
- PINMUX_DATA(PTM4_DATA, PTM4_OUT, PTM4_IN),
- PINMUX_DATA(PTM3_DATA, PTM3_OUT, PTM3_IN),
- PINMUX_DATA(PTM2_DATA, PTM2_OUT, PTM2_IN),
- PINMUX_DATA(PTM1_DATA, PTM1_OUT, PTM1_IN),
- PINMUX_DATA(PTM0_DATA, PTM0_OUT, PTM0_IN),
-
- /* PTN */
- PINMUX_DATA(PTN7_DATA, PTN7_OUT, PTN7_IN),
- PINMUX_DATA(PTN6_DATA, PTN6_OUT, PTN6_IN),
- PINMUX_DATA(PTN5_DATA, PTN5_OUT, PTN5_IN),
- PINMUX_DATA(PTN4_DATA, PTN4_OUT, PTN4_IN),
- PINMUX_DATA(PTN3_DATA, PTN3_OUT, PTN3_IN),
- PINMUX_DATA(PTN2_DATA, PTN2_OUT, PTN2_IN),
- PINMUX_DATA(PTN1_DATA, PTN1_OUT, PTN1_IN),
- PINMUX_DATA(PTN0_DATA, PTN0_OUT, PTN0_IN),
-
- /* PTQ */
- PINMUX_DATA(PTQ6_DATA, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_OUT, PTQ5_IN),
- PINMUX_DATA(PTQ4_DATA, PTQ4_OUT, PTQ4_IN),
- PINMUX_DATA(PTQ3_DATA, PTQ3_OUT, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_OUT, PTQ0_IN),
-
- /* PTR */
- PINMUX_DATA(PTR4_DATA, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_OUT),
-
- /* PTS */
- PINMUX_DATA(PTS4_DATA, PTS4_IN),
- PINMUX_DATA(PTS3_DATA, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_OUT, PTS2_IN),
- PINMUX_DATA(PTS1_DATA, PTS1_IN),
- PINMUX_DATA(PTS0_DATA, PTS0_OUT),
-
- /* PTT */
- PINMUX_DATA(PTT4_DATA, PTT4_OUT, PTT4_IN),
- PINMUX_DATA(PTT3_DATA, PTT3_OUT, PTT3_IN),
- PINMUX_DATA(PTT2_DATA, PTT2_OUT, PTT2_IN),
- PINMUX_DATA(PTT1_DATA, PTT1_IN),
- PINMUX_DATA(PTT0_DATA, PTT0_OUT),
-
- /* PTU */
- PINMUX_DATA(PTU4_DATA, PTU4_OUT, PTU4_IN),
- PINMUX_DATA(PTU3_DATA, PTU3_OUT, PTU3_IN),
- PINMUX_DATA(PTU2_DATA, PTU2_OUT, PTU2_IN),
- PINMUX_DATA(PTU1_DATA, PTU1_IN),
- PINMUX_DATA(PTU0_DATA, PTU0_OUT, PTU0_IN),
-
- /* PTV */
- PINMUX_DATA(PTV4_DATA, PTV4_OUT, PTV4_IN),
- PINMUX_DATA(PTV3_DATA, PTV3_OUT, PTV3_IN),
- PINMUX_DATA(PTV2_DATA, PTV2_OUT, PTV2_IN),
- PINMUX_DATA(PTV1_DATA, PTV1_OUT, PTV1_IN),
- PINMUX_DATA(PTV0_DATA, PTV0_OUT, PTV0_IN),
-
- /* PTW */
- PINMUX_DATA(PTW6_DATA, PTW6_IN),
- PINMUX_DATA(PTW5_DATA, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_OUT, PTW4_IN),
- PINMUX_DATA(PTW3_DATA, PTW3_OUT, PTW3_IN),
- PINMUX_DATA(PTW2_DATA, PTW2_OUT, PTW2_IN),
- PINMUX_DATA(PTW1_DATA, PTW1_OUT, PTW1_IN),
- PINMUX_DATA(PTW0_DATA, PTW0_OUT, PTW0_IN),
-
- /* PTX */
- PINMUX_DATA(PTX6_DATA, PTX6_OUT, PTX6_IN),
- PINMUX_DATA(PTX5_DATA, PTX5_OUT, PTX5_IN),
- PINMUX_DATA(PTX4_DATA, PTX4_OUT, PTX4_IN),
- PINMUX_DATA(PTX3_DATA, PTX3_OUT, PTX3_IN),
- PINMUX_DATA(PTX2_DATA, PTX2_OUT, PTX2_IN),
- PINMUX_DATA(PTX1_DATA, PTX1_OUT, PTX1_IN),
- PINMUX_DATA(PTX0_DATA, PTX0_OUT, PTX0_IN),
-
- /* PTY */
- PINMUX_DATA(PTY5_DATA, PTY5_OUT, PTY5_IN),
- PINMUX_DATA(PTY4_DATA, PTY4_OUT, PTY4_IN),
- PINMUX_DATA(PTY3_DATA, PTY3_OUT, PTY3_IN),
- PINMUX_DATA(PTY2_DATA, PTY2_OUT, PTY2_IN),
- PINMUX_DATA(PTY1_DATA, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_OUT, PTY0_IN),
-
- /* PTZ */
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN),
-
- /* SCIF0 */
- PINMUX_DATA(SCIF0_TXD_MARK, SCIF0_TXD),
- PINMUX_DATA(SCIF0_RXD_MARK, SCIF0_RXD),
- PINMUX_DATA(SCIF0_RTS_MARK, PSD7_SCIF0_RTS, SCIF0_RTS_SIUAOSPD),
- PINMUX_DATA(SCIF0_CTS_MARK, PSD6_SCIF0_CTS, SCIF0_CTS_SIUAISPD),
- PINMUX_DATA(SCIF0_SCK_MARK, PSD8_SCIF0_SCK, SCIF0_SCK_TPUTO),
-
- /* SCIF1 */
- PINMUX_DATA(SCIF1_TXD_MARK, PSD11_SCIF1, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(SCIF1_RXD_MARK, PSD11_SCIF1, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(SCIF1_RTS_MARK, PSD12_SCIF1, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(SCIF1_CTS_MARK, PSD12_SCIF1, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(SCIF1_SCK_MARK, PSD11_SCIF1, VIO_D7_SCIF1_SCK),
-
- /* SCIF2 */
- PINMUX_DATA(SCIF2_TXD_MARK, PSD13_SCIF2, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(SCIF2_RXD_MARK, PSD13_SCIF2, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(SCIF2_RTS_MARK, PSD13_SCIF2, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(SCIF2_CTS_MARK, PSD13_SCIF2, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(SCIF2_SCK_MARK, PSD13_SCIF2, VIO_STEX_SCIF2_SCK),
-
- /* SIO */
- PINMUX_DATA(SIOTXD_MARK, PSB15_SIOTXD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIORXD_MARK, PSB14_SIORXD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIOD_MARK, PSB13_SIOD, SIOD_SIUBILR),
- PINMUX_DATA(SIOSTRB0_MARK, PSB12_SIOSTRB0, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIOSTRB1_MARK, PSB11_SIOSTRB1, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIOSCK_MARK, PSB10_SIOSCK, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIOMCK_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIOMCK, PTF6),
-
- /* CEU */
- PINMUX_DATA(VIO_D15_MARK, PSC0_VIO, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(VIO_D14_MARK, PSC0_VIO, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(VIO_D13_MARK, PSC0_VIO, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(VIO_D12_MARK, PSC0_VIO, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(VIO_D11_MARK, PSC0_VIO, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(VIO_D10_MARK, PSE2_VIO_D10, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(VIO_D9_MARK, PSE1_VIO_D9, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(VIO_D8_MARK, PSE0_VIO_D8, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(VIO_D7_MARK, PSD11_VIO, VIO_D7_SCIF1_SCK),
- PINMUX_DATA(VIO_D6_MARK, PSD11_VIO, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(VIO_D5_MARK, PSD11_VIO, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(VIO_D4_MARK, VIO_D4),
- PINMUX_DATA(VIO_D3_MARK, VIO_D3),
- PINMUX_DATA(VIO_D2_MARK, VIO_D2),
- PINMUX_DATA(VIO_D1_MARK, VIO_D1),
- PINMUX_DATA(VIO_D0_MARK, PSD10_VIO_D0, VIO_D0_LCDLCLK),
- PINMUX_DATA(VIO_CLK_MARK, PSD12_VIO, MSELB9_VIO, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(VIO_VD_MARK, PSD12_VIO, MSELB9_VIO, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(VIO_HD_MARK, PSD13_VIO, MSELB9_VIO, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(VIO_FLD_MARK, PSD13_VIO, HIZA9_VIO, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(VIO_CKO_MARK, PSD13_VIO, HIZA9_VIO, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(VIO_STEX_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEX_SCIF2_SCK),
- PINMUX_DATA(VIO_STEM_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FCE_VIO_HD2),
- PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FRB_VIO_CLK2),
-
- /* LCDC */
- PINMUX_DATA(LCDD23_MARK, HIZA8_LCDC, LCDD23),
- PINMUX_DATA(LCDD22_MARK, HIZA8_LCDC, LCDD22),
- PINMUX_DATA(LCDD21_MARK, HIZA8_LCDC, LCDD21),
- PINMUX_DATA(LCDD20_MARK, HIZA8_LCDC, LCDD20),
- PINMUX_DATA(LCDD19_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD19_DV_CLKI),
- PINMUX_DATA(LCDD18_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD18_DV_CLK),
- PINMUX_DATA(LCDD17_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD17_DV_HSYNC),
- PINMUX_DATA(LCDD16_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD16_DV_VSYNC),
- PINMUX_DATA(LCDD15_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD15_DV_D15),
- PINMUX_DATA(LCDD14_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD14_DV_D14),
- PINMUX_DATA(LCDD13_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD13_DV_D13),
- PINMUX_DATA(LCDD12_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD12_DV_D12),
- PINMUX_DATA(LCDD11_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD11_DV_D11),
- PINMUX_DATA(LCDD10_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD10_DV_D10),
- PINMUX_DATA(LCDD9_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD9_DV_D9),
- PINMUX_DATA(LCDD8_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD8_DV_D8),
- PINMUX_DATA(LCDD7_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD7_DV_D7),
- PINMUX_DATA(LCDD6_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD6_DV_D6),
- PINMUX_DATA(LCDD5_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD5_DV_D5),
- PINMUX_DATA(LCDD4_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD4_DV_D4),
- PINMUX_DATA(LCDD3_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD3_DV_D3),
- PINMUX_DATA(LCDD2_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD2_DV_D2),
- PINMUX_DATA(LCDD1_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD1_DV_D1),
- PINMUX_DATA(LCDD0_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD0_DV_D0),
- PINMUX_DATA(LCDLCLK_MARK, PSD10_LCDLCLK, VIO_D0_LCDLCLK),
- /* Main LCD */
- PINMUX_DATA(LCDDON_MARK, PSD2_LCDDON, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN_MARK, HIZA7_LCDC, LCDVSYN),
- /* Main LCD - RGB Mode */
- PINMUX_DATA(LCDDCK_MARK, MSELB8_RGB, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDHSYN_MARK, MSELB8_RGB, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDDISP_MARK, MSELB8_RGB, HIZA7_LCDC, LCDDISP_LCDRS),
- /* Main LCD - SYS Mode */
- PINMUX_DATA(LCDRS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDDISP_LCDRS),
- PINMUX_DATA(LCDCS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDWR_MARK, MSELB8_SYS, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDRD_MARK, HIZA7_LCDC, LCDRD),
- /* Sub LCD - SYS Mode */
- PINMUX_DATA(LCDDON2_MARK, PSD2_LCDDON2, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN2_MARK, PSE12_LCDVSYN2, HIZA8_LCDC, LCDVSYN2_DACK),
- PINMUX_DATA(LCDCS2_MARK, PSD5_LCDCS2, CS6B_CE1B_LCDCS2),
-
- /* BSC */
- PINMUX_DATA(IOIS16_MARK, IOIS16),
- PINMUX_DATA(A25_MARK, A25),
- PINMUX_DATA(A24_MARK, A24),
- PINMUX_DATA(A23_MARK, A23),
- PINMUX_DATA(A22_MARK, A22),
- PINMUX_DATA(BS_MARK, PSA9_BS, IRQ4_BS),
- PINMUX_DATA(CS6B_CE1B_MARK, PSD5_CS6B_CE1B, CS6B_CE1B_LCDCS2),
- PINMUX_DATA(WAIT_MARK, WAIT),
- PINMUX_DATA(CS6A_CE2B_MARK, CS6A_CE2B),
-
- /* SBSC */
- PINMUX_DATA(HPD63_MARK, HPD63),
- PINMUX_DATA(HPD62_MARK, HPD62),
- PINMUX_DATA(HPD61_MARK, HPD61),
- PINMUX_DATA(HPD60_MARK, HPD60),
- PINMUX_DATA(HPD59_MARK, HPD59),
- PINMUX_DATA(HPD58_MARK, HPD58),
- PINMUX_DATA(HPD57_MARK, HPD57),
- PINMUX_DATA(HPD56_MARK, HPD56),
- PINMUX_DATA(HPD55_MARK, HPD55),
- PINMUX_DATA(HPD54_MARK, HPD54),
- PINMUX_DATA(HPD53_MARK, HPD53),
- PINMUX_DATA(HPD52_MARK, HPD52),
- PINMUX_DATA(HPD51_MARK, HPD51),
- PINMUX_DATA(HPD50_MARK, HPD50),
- PINMUX_DATA(HPD49_MARK, HPD49),
- PINMUX_DATA(HPD48_MARK, HPD48),
- PINMUX_DATA(HPDQM7_MARK, HPDQM7),
- PINMUX_DATA(HPDQM6_MARK, HPDQM6),
- PINMUX_DATA(HPDQM5_MARK, HPDQM5),
- PINMUX_DATA(HPDQM4_MARK, HPDQM4),
-
- /* IRQ */
- PINMUX_DATA(IRQ0_MARK, HIZC8_IRQ0, IRQ0),
- PINMUX_DATA(IRQ1_MARK, HIZC9_IRQ1, IRQ1),
- PINMUX_DATA(IRQ2_MARK, PSA4_IRQ2, HIZC10_IRQ2, IRQ2_SDHID2),
- PINMUX_DATA(IRQ3_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_IRQ3,
- HIZC11_IRQ3, PTQ0),
- PINMUX_DATA(IRQ4_MARK, PSA9_IRQ4, HIZC12_IRQ4, IRQ4_BS),
- PINMUX_DATA(IRQ5_MARK, HIZC13_IRQ5, IRQ5),
- PINMUX_DATA(IRQ6_MARK, PSA15_IRQ6, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(IRQ7_MARK, PSA14_IRQ7, HIZC15_IRQ7, KEYIN4_IRQ7),
-
- /* SDHI */
- PINMUX_DATA(SDHICD_MARK, SDHICD),
- PINMUX_DATA(SDHIWP_MARK, SDHIWP),
- PINMUX_DATA(SDHID3_MARK, SDHID3),
- PINMUX_DATA(SDHID2_MARK, PSA4_SDHID2, IRQ2_SDHID2),
- PINMUX_DATA(SDHID1_MARK, SDHID1),
- PINMUX_DATA(SDHID0_MARK, SDHID0),
- PINMUX_DATA(SDHICMD_MARK, SDHICMD),
- PINMUX_DATA(SDHICLK_MARK, SDHICLK),
-
- /* SIU - Port A */
- PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, HIZB4_SIUA, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, HIZB4_SIUA, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, HIZB4_SIUA, SIUAISLD_SIOF1_RXD),
- PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, HIZB4_SIUA, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, HIZB4_SIUA, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, HIZB4_SIUA, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, HIZB4_SIUA, PSB1_SIUMCKA, PTK0),
- PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, HIZB4_SIUA, PTK0),
-
- /* SIU - Port B */
- PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIUBOBT_MARK, PSB10_SIUBOBT, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIUBISLD_MARK, PSB14_SIUBISLD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIUBILR_MARK, PSB13_SIUBILR, SIOD_SIUBILR),
- PINMUX_DATA(SIUBIBT_MARK, PSB12_SIUBIBT, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIUBOSLD_MARK, PSB15_SIUBOSLD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIUMCKB_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIUMCKB, PTF6),
- PINMUX_DATA(SIUFCKB_MARK, PSD9_SIUFCKB, PTF6),
-
- /* AUD */
- PINMUX_DATA(AUDSYNC_MARK, AUDSYNC),
- PINMUX_DATA(AUDATA3_MARK, AUDATA3),
- PINMUX_DATA(AUDATA2_MARK, AUDATA2),
- PINMUX_DATA(AUDATA1_MARK, AUDATA1),
- PINMUX_DATA(AUDATA0_MARK, AUDATA0),
-
- /* DMAC */
- PINMUX_DATA(DACK_MARK, PSE12_DACK, LCDVSYN2_DACK),
- PINMUX_DATA(DREQ0_MARK, DREQ0),
-
- /* VOU */
- PINMUX_DATA(DV_CLKI_MARK, PSD0_DV, LCDD19_DV_CLKI),
- PINMUX_DATA(DV_CLK_MARK, PSD0_DV, LCDD18_DV_CLK),
- PINMUX_DATA(DV_HSYNC_MARK, PSD0_DV, LCDD17_DV_HSYNC),
- PINMUX_DATA(DV_VSYNC_MARK, PSD0_DV, LCDD16_DV_VSYNC),
- PINMUX_DATA(DV_D15_MARK, PSD0_DV, LCDD15_DV_D15),
- PINMUX_DATA(DV_D14_MARK, PSD0_DV, LCDD14_DV_D14),
- PINMUX_DATA(DV_D13_MARK, PSD0_DV, LCDD13_DV_D13),
- PINMUX_DATA(DV_D12_MARK, PSD0_DV, LCDD12_DV_D12),
- PINMUX_DATA(DV_D11_MARK, PSD0_DV, LCDD11_DV_D11),
- PINMUX_DATA(DV_D10_MARK, PSD0_DV, LCDD10_DV_D10),
- PINMUX_DATA(DV_D9_MARK, PSD0_DV, LCDD9_DV_D9),
- PINMUX_DATA(DV_D8_MARK, PSD0_DV, LCDD8_DV_D8),
- PINMUX_DATA(DV_D7_MARK, PSD0_DV, LCDD7_DV_D7),
- PINMUX_DATA(DV_D6_MARK, PSD0_DV, LCDD6_DV_D6),
- PINMUX_DATA(DV_D5_MARK, PSD0_DV, LCDD5_DV_D5),
- PINMUX_DATA(DV_D4_MARK, PSD0_DV, LCDD4_DV_D4),
- PINMUX_DATA(DV_D3_MARK, PSD0_DV, LCDD3_DV_D3),
- PINMUX_DATA(DV_D2_MARK, PSD0_DV, LCDD2_DV_D2),
- PINMUX_DATA(DV_D1_MARK, PSD0_DV, LCDD1_DV_D1),
- PINMUX_DATA(DV_D0_MARK, PSD0_DV, LCDD0_DV_D0),
-
- /* CPG */
- PINMUX_DATA(STATUS0_MARK, STATUS0),
- PINMUX_DATA(PDSTATUS_MARK, PDSTATUS),
-
- /* SIOF0 */
- PINMUX_DATA(SIOF0_MCK_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_SIOF0_MCK, PTQ0),
- PINMUX_DATA(SIOF0_SCK_MARK, PSB5_SIOF0_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(SIOF0_SYNC_MARK, PSB4_SIOF0_SYNC, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(SIOF0_SS1_MARK, PSB3_SIOF0_SS1, SIOF0_SS1_TS_SPSYNC),
- PINMUX_DATA(SIOF0_SS2_MARK, PSB2_SIOF0_SS2, SIOF0_SS2_SIM_RST),
- PINMUX_DATA(SIOF0_TXD_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_SIOF0_TXD, PTQ1),
- PINMUX_DATA(SIOF0_RXD_MARK, PSE13_SIOF0_RXD_IRDA_IN,
- PSB6_SIOF0_RXD, PTQ2),
-
- /* SIOF1 */
- PINMUX_DATA(SIOF1_MCK_MARK, PSE11_SIUMCKA_SIOF1_MCK,
- PSB1_SIOF1_MCK, PTK0),
- PINMUX_DATA(SIOF1_SCK_MARK, PSC14_SIOF1_SCK, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIOF1_SYNC_MARK, PSC13_SIOF1_SYNC, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIOF1_SS1_MARK, PSC12_SIOF1_SS1, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIOF1_SS2_MARK, PSC11_SIOF1_SS2, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIOF1_TXD_MARK, PSB0_SIOF1_TXD, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIOF1_RXD_MARK, PSC15_SIOF1_RXD, SIUAISLD_SIOF1_RXD),
-
- /* SIM */
- PINMUX_DATA(SIM_D_MARK, PSE15_SIM_D, PTQ0),
- PINMUX_DATA(SIM_CLK_MARK, PSE14_SIM_CLK, PTQ1),
- PINMUX_DATA(SIM_RST_MARK, PSB2_SIM_RST, SIOF0_SS2_SIM_RST),
-
- /* TSIF */
- PINMUX_DATA(TS_SDAT_MARK, PSE13_TS_SDAT, PTQ2),
- PINMUX_DATA(TS_SCK_MARK, PSB5_TS_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(TS_SDEN_MARK, PSB4_TS_SDEN, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(TS_SPSYNC_MARK, PSB3_TS_SPSYNC, SIOF0_SS1_TS_SPSYNC),
-
- /* IRDA */
- PINMUX_DATA(IRDA_IN_MARK, PSE13_SIOF0_RXD_IRDA_IN, PSB6_IRDA_IN, PTQ2),
- PINMUX_DATA(IRDA_OUT_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_IRDA_OUT, PTQ1),
-
- /* TPU */
- PINMUX_DATA(TPUTO_MARK, PSD8_TPUTO, SCIF0_SCK_TPUTO),
-
- /* FLCTL */
- PINMUX_DATA(FCE_MARK, PSE3_FLCTL, FCE_VIO_HD2),
- PINMUX_DATA(NAF7_MARK, PSC0_NAF, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(NAF6_MARK, PSC0_NAF, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(NAF5_MARK, PSC0_NAF, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(NAF4_MARK, PSC0_NAF, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(NAF3_MARK, PSC0_NAF, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(NAF2_MARK, PSE2_NAF2, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(NAF1_MARK, PSE1_NAF1, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(NAF0_MARK, PSE0_NAF0, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(FCDE_MARK, FCDE),
- PINMUX_DATA(FOE_MARK, PSE3_FLCTL, HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(FSC_MARK, FSC),
- PINMUX_DATA(FWE_MARK, FWE),
- PINMUX_DATA(FRB_MARK, PSE3_FLCTL, FRB_VIO_CLK2),
-
- /* KEYSC */
- PINMUX_DATA(KEYIN0_MARK, PSA15_KEYIN0, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(KEYIN1_MARK, HIZA14_KEYSC, KEYIN1),
- PINMUX_DATA(KEYIN2_MARK, HIZA14_KEYSC, KEYIN2),
- PINMUX_DATA(KEYIN3_MARK, HIZA14_KEYSC, KEYIN3),
- PINMUX_DATA(KEYIN4_MARK, PSA14_KEYIN4, HIZC15_IRQ7, KEYIN4_IRQ7),
- PINMUX_DATA(KEYOUT0_MARK, HIZA14_KEYSC, KEYOUT0),
- PINMUX_DATA(KEYOUT1_MARK, HIZA14_KEYSC, KEYOUT1),
- PINMUX_DATA(KEYOUT2_MARK, HIZA14_KEYSC, KEYOUT2),
- PINMUX_DATA(KEYOUT3_MARK, HIZA14_KEYSC, KEYOUT3),
- PINMUX_DATA(KEYOUT4_IN6_MARK, HIZA14_KEYSC, KEYOUT4_IN6),
- PINMUX_DATA(KEYOUT5_IN5_MARK, HIZA14_KEYSC, KEYOUT5_IN5),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SCIF2_RTS),
- GPIO_FN(SCIF2_CTS),
- GPIO_FN(SCIF2_SCK),
-
- /* SIO */
- GPIO_FN(SIOTXD),
- GPIO_FN(SIORXD),
- GPIO_FN(SIOD),
- GPIO_FN(SIOSTRB0),
- GPIO_FN(SIOSTRB1),
- GPIO_FN(SIOSCK),
- GPIO_FN(SIOMCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK),
- GPIO_FN(VIO_VD),
- GPIO_FN(VIO_HD),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_STEX),
- GPIO_FN(VIO_STEM),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
- /* Sub LCD - SYS Mode */
- GPIO_FN(LCDDON2),
- GPIO_FN(LCDVCPWC2),
- GPIO_FN(LCDVEPWC2),
- GPIO_FN(LCDVSYN2),
- GPIO_FN(LCDCS2),
-
- /* BSC */
- GPIO_FN(IOIS16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(BS),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(WAIT),
- GPIO_FN(CS6A_CE2B),
-
- /* SBSC */
- GPIO_FN(HPD63),
- GPIO_FN(HPD62),
- GPIO_FN(HPD61),
- GPIO_FN(HPD60),
- GPIO_FN(HPD59),
- GPIO_FN(HPD58),
- GPIO_FN(HPD57),
- GPIO_FN(HPD56),
- GPIO_FN(HPD55),
- GPIO_FN(HPD54),
- GPIO_FN(HPD53),
- GPIO_FN(HPD52),
- GPIO_FN(HPD51),
- GPIO_FN(HPD50),
- GPIO_FN(HPD49),
- GPIO_FN(HPD48),
- GPIO_FN(HPDQM7),
- GPIO_FN(HPDQM6),
- GPIO_FN(HPDQM5),
- GPIO_FN(HPDQM4),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* SDHI */
- GPIO_FN(SDHICD),
- GPIO_FN(SDHIWP),
- GPIO_FN(SDHID3),
- GPIO_FN(SDHID2),
- GPIO_FN(SDHID1),
- GPIO_FN(SDHID0),
- GPIO_FN(SDHICMD),
- GPIO_FN(SDHICLK),
-
- /* SIU - Port A */
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUMCKA),
- GPIO_FN(SIUFCKA),
-
- /* SIU - Port B */
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUMCKB),
- GPIO_FN(SIUFCKB),
-
- /* AUD */
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* DMAC */
- GPIO_FN(DACK),
- GPIO_FN(DREQ0),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_MCK),
- GPIO_FN(SIOF0_SCK),
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_SS1),
- GPIO_FN(SIOF0_SS2),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_MCK),
- GPIO_FN(SIOF1_SCK),
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_SS1),
- GPIO_FN(SIOF1_SS2),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* TSIF */
- GPIO_FN(TS_SDAT),
- GPIO_FN(TS_SCK),
- GPIO_FN(TS_SDEN),
- GPIO_FN(TS_SPSYNC),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* TPU */
- GPIO_FN(TPUTO),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- VIO_D7_SCIF1_SCK, PTA7_OUT, 0, PTA7_IN,
- VIO_D6_SCIF1_RXD, 0, 0, PTA6_IN,
- VIO_D5_SCIF1_TXD, PTA5_OUT, 0, PTA5_IN,
- VIO_D4, 0, 0, PTA4_IN,
- VIO_D3, 0, 0, PTA3_IN,
- VIO_D2, 0, 0, PTA2_IN,
- VIO_D1, 0, 0, PTA1_IN,
- VIO_D0_LCDLCLK, 0, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- HPD55, PTB7_OUT, 0, PTB7_IN,
- HPD54, PTB6_OUT, 0, PTB6_IN,
- HPD53, PTB5_OUT, 0, PTB5_IN,
- HPD52, PTB4_OUT, 0, PTB4_IN,
- HPD51, PTB3_OUT, 0, PTB3_IN,
- HPD50, PTB2_OUT, 0, PTB2_IN,
- HPD49, PTB1_OUT, 0, PTB1_IN,
- HPD48, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PCCR", 0xa4050104, 16,
- GROUP(2, -2, 2, 2, 2, 2, -2, 2),
- GROUP(
- 0, 0, 0, PTC7_IN,
- /* RESERVED [2] */
- IOIS16, 0, 0, PTC5_IN,
- HPDQM7, PTC4_OUT, 0, PTC4_IN,
- HPDQM6, PTC3_OUT, 0, PTC3_IN,
- HPDQM5, PTC2_OUT, 0, PTC2_IN,
- /* RESERVED [2] */
- HPDQM4, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- SDHICD, 0, 0, PTD7_IN,
- SDHIWP, PTD6_OUT, 0, PTD6_IN,
- SDHID3, PTD5_OUT, 0, PTD5_IN,
- IRQ2_SDHID2, PTD4_OUT, 0, PTD4_IN,
- SDHID1, PTD3_OUT, 0, PTD3_IN,
- SDHID0, PTD2_OUT, 0, PTD2_IN,
- SDHICMD, PTD1_OUT, 0, PTD1_IN,
- SDHICLK, PTD0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(2, 2, 2, 2, -4, 2, 2),
- GROUP(
- A25, PTE7_OUT, 0, PTE7_IN,
- A24, PTE6_OUT, 0, PTE6_IN,
- A23, PTE5_OUT, 0, PTE5_IN,
- A22, PTE4_OUT, 0, PTE4_IN,
- /* RESERVED [4] */
- IRQ5, PTE1_OUT, 0, PTE1_IN,
- IRQ4_BS, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6, PTF6_OUT, 0, PTF6_IN,
- SIOSCK_SIUBOBT, PTF5_OUT, 0, PTF5_IN,
- SIOSTRB1_SIUBOLR, PTF4_OUT, 0, PTF4_IN,
- SIOSTRB0_SIUBIBT, PTF3_OUT, 0, PTF3_IN,
- SIOD_SIUBILR, PTF2_OUT, 0, PTF2_IN,
- SIORXD_SIUBISLD, 0, 0, PTF1_IN,
- SIOTXD_SIUBOSLD, PTF0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- AUDSYNC, PTG4_OUT, 0, 0,
- AUDATA3, PTG3_OUT, 0, 0,
- AUDATA2, PTG2_OUT, 0, 0,
- AUDATA1, PTG1_OUT, 0, 0,
- AUDATA0, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- LCDVCPWC_LCDVCPWC2, PTH7_OUT, 0, 0,
- LCDVSYN2_DACK, PTH6_OUT, 0, PTH6_IN,
- LCDVSYN, PTH5_OUT, 0, PTH5_IN,
- LCDDISP_LCDRS, PTH4_OUT, 0, 0,
- LCDHSYN_LCDCS, PTH3_OUT, 0, 0,
- LCDDON_LCDDON2, PTH2_OUT, 0, 0,
- LCDD17_DV_HSYNC, PTH1_OUT, 0, PTH1_IN,
- LCDD16_DV_VSYNC, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, 2, 2, -6, 2, 2),
- GROUP(
- STATUS0, PTJ7_OUT, 0, 0,
- 0, PTJ6_OUT, 0, 0,
- PDSTATUS, PTJ5_OUT, 0, 0,
- /* RESERVED [6] */
- IRQ1, PTJ1_OUT, 0, PTJ1_IN,
- IRQ0, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIUAILR_SIOF1_SS2, PTK6_OUT, 0, PTK6_IN,
- SIUAIBT_SIOF1_SS1, PTK5_OUT, 0, PTK5_IN,
- SIUAOLR_SIOF1_SYNC, PTK4_OUT, 0, PTK4_IN,
- SIUAOBT_SIOF1_SCK, PTK3_OUT, 0, PTK3_IN,
- SIUAISLD_SIOF1_RXD, 0, 0, PTK2_IN,
- SIUAOSLD_SIOF1_TXD, PTK1_OUT, 0, 0,
- PTK0, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- LCDD15_DV_D15, PTL7_OUT, 0, PTL7_IN,
- LCDD14_DV_D14, PTL6_OUT, 0, PTL6_IN,
- LCDD13_DV_D13, PTL5_OUT, 0, PTL5_IN,
- LCDD12_DV_D12, PTL4_OUT, 0, PTL4_IN,
- LCDD11_DV_D11, PTL3_OUT, 0, PTL3_IN,
- LCDD10_DV_D10, PTL2_OUT, 0, PTL2_IN,
- LCDD9_DV_D9, PTL1_OUT, 0, PTL1_IN,
- LCDD8_DV_D8, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- LCDD7_DV_D7, PTM7_OUT, 0, PTM7_IN,
- LCDD6_DV_D6, PTM6_OUT, 0, PTM6_IN,
- LCDD5_DV_D5, PTM5_OUT, 0, PTM5_IN,
- LCDD4_DV_D4, PTM4_OUT, 0, PTM4_IN,
- LCDD3_DV_D3, PTM3_OUT, 0, PTM3_IN,
- LCDD2_DV_D2, PTM2_OUT, 0, PTM2_IN,
- LCDD1_DV_D1, PTM1_OUT, 0, PTM1_IN,
- LCDD0_DV_D0, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- HPD63, PTN7_OUT, 0, PTN7_IN,
- HPD62, PTN6_OUT, 0, PTN6_IN,
- HPD61, PTN5_OUT, 0, PTN5_IN,
- HPD60, PTN4_OUT, 0, PTN4_IN,
- HPD59, PTN3_OUT, 0, PTN3_IN,
- HPD58, PTN2_OUT, 0, PTN2_IN,
- HPD57, PTN1_OUT, 0, PTN1_IN,
- HPD56, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIOF0_SS2_SIM_RST, PTQ6_OUT, 0, 0,
- SIOF0_SS1_TS_SPSYNC, PTQ5_OUT, 0, PTQ5_IN,
- SIOF0_SYNC_TS_SDEN, PTQ4_OUT, 0, PTQ4_IN,
- SIOF0_SCK_TS_SCK, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2, 0, 0, PTQ2_IN,
- PTQ1, PTQ1_OUT, 0, 0,
- PTQ0, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- LCDRD, PTR4_OUT, 0, 0,
- CS6B_CE1B_LCDCS2, PTR3_OUT, 0, 0,
- WAIT, 0, 0, PTR2_IN,
- LCDDCK_LCDWR, PTR1_OUT, 0, 0,
- LCDVEPWC_LCDVEPWC2, PTR0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- SCIF0_CTS_SIUAISPD, 0, 0, PTS4_IN,
- SCIF0_RTS_SIUAOSPD, PTS3_OUT, 0, 0,
- SCIF0_SCK_TPUTO, PTS2_OUT, 0, PTS2_IN,
- SCIF0_RXD, 0, 0, PTS1_IN,
- SCIF0_TXD, PTS0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- FOE_VIO_VD2, PTT4_OUT, 0, PTT4_IN,
- FWE, PTT3_OUT, 0, PTT3_IN,
- FSC, PTT2_OUT, 0, PTT2_IN,
- DREQ0, 0, 0, PTT1_IN,
- FCDE, PTT0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF2_VIO_D10, PTU4_OUT, 0, PTU4_IN,
- NAF1_VIO_D9, PTU3_OUT, 0, PTU3_IN,
- NAF0_VIO_D8, PTU2_OUT, 0, PTU2_IN,
- FRB_VIO_CLK2, 0, 0, PTU1_IN,
- FCE_VIO_HD2, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050144, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF7_VIO_D15, PTV4_OUT, 0, PTV4_IN,
- NAF6_VIO_D14, PTV3_OUT, 0, PTV3_IN,
- NAF5_VIO_D13, PTV2_OUT, 0, PTV2_IN,
- NAF4_VIO_D12, PTV1_OUT, 0, PTV1_IN,
- NAF3_VIO_D11, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- 0, 0, 0, 0,
- VIO_FLD_SCIF2_CTS, 0, 0, PTW6_IN,
- VIO_CKO_SCIF2_RTS, PTW5_OUT, 0, 0,
- VIO_STEX_SCIF2_SCK, PTW4_OUT, 0, PTW4_IN,
- VIO_STEM_SCIF2_TXD, PTW3_OUT, 0, PTW3_IN,
- VIO_HD_SCIF2_RXD, PTW2_OUT, 0, PTW2_IN,
- VIO_VD_SCIF1_CTS, PTW1_OUT, 0, PTW1_IN,
- VIO_CLK_SCIF1_RTS, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- 0, 0, 0, 0,
- CS6A_CE2B, PTX6_OUT, 0, PTX6_IN,
- LCDD23, PTX5_OUT, 0, PTX5_IN,
- LCDD22, PTX4_OUT, 0, PTX4_IN,
- LCDD21, PTX3_OUT, 0, PTX3_IN,
- LCDD20, PTX2_OUT, 0, PTX2_IN,
- LCDD19_DV_CLKI, PTX1_OUT, 0, PTX1_IN,
- LCDD18_DV_CLK, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PYCR", 0xa405014a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- KEYOUT5_IN5, PTY5_OUT, 0, PTY5_IN,
- KEYOUT4_IN6, PTY4_OUT, 0, PTY4_IN,
- KEYOUT3, PTY3_OUT, 0, PTY3_IN,
- KEYOUT2, PTY2_OUT, 0, PTY2_IN,
- KEYOUT1, PTY1_OUT, 0, 0,
- KEYOUT0, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PZCR", 0xa405014c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, -2),
- GROUP(
- /* RESERVED [4] */
- KEYIN4_IRQ7, 0, 0, PTZ5_IN,
- KEYIN3, 0, 0, PTZ4_IN,
- KEYIN2, 0, 0, PTZ3_IN,
- KEYIN1, 0, 0, PTZ2_IN,
- KEYIN0_IRQ6, 0, 0, PTZ1_IN,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(1, 1, -4, 1, -4, 1, -4),
- GROUP(
- PSA15_KEYIN0, PSA15_IRQ6,
- PSA14_KEYIN4, PSA14_IRQ7,
- /* RESERVED [4] */
- PSA9_IRQ4, PSA9_BS,
- /* RESERVED [4] */
- PSA4_IRQ2, PSA4_SDHID2,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- PSB15_SIOTXD, PSB15_SIUBOSLD,
- PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR,
- PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR,
- PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB,
- PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT,
- PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK,
- PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC,
- PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK,
- PSB0_SIUAOSLD, PSB0_SIOF1_TXD ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(1, 1, 1, 1, 1, -10, 1),
- GROUP(
- PSC15_SIUAISLD, PSC15_SIOF1_RXD,
- PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC,
- PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2,
- /* RESERVED [10] */
- PSC0_NAF, PSC0_VIO ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- 0, 0,
- 0, 0,
- PSD13_VIO, PSD13_SCIF2,
- PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1,
- PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB,
- PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD,
- PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- 0, 0,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2,
- 0, 0,
- PSD0_LCDD19_LCDD0, PSD0_DV ))
- },
- { PINMUX_CFG_REG_VAR("PSELE", 0xa4050156, 16,
- GROUP(1, 1, 1, 1, 1, -7, 1, 1, 1, 1),
- GROUP(
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT,
- PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- /* RESERVED [7] */
- PSE3_FLCTL, PSE3_VIO,
- PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9,
- PSE0_NAF0, PSE0_VIO_D8 ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRA", 0xa4050158, 16,
- GROUP(-1, 1, -3, 1, 1, 1, 1, 1, -6),
- GROUP(
- /* RESERVED [1] */
- HIZA14_KEYSC, HIZA14_HIZ,
- /* RESERVED [3] */
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRB", 0xa405015a, 16,
- GROUP(-11, 1, -2, 1, 1),
- GROUP(
- /* RESERVED [11] */
- HIZB4_SIUA, HIZB4_HIZ,
- /* RESERVED [2] */
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRC", 0xa405015c, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("MSELCRB", 0xa4050182, 16,
- GROUP(-6, 1, 1, -8),
- GROUP(
- /* RESERVED [6] */
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, 0, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, 0, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- 0, 0, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, 0, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- 0, 0, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- 0, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- 0, 0, 0, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- 0, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- 0, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- 0, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- 0, 0, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7722_pinmux_info = {
- .name = "sh7722_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7723.c b/drivers/pinctrl/renesas/pfc-sh7723.c
deleted file mode 100644
index 95344281966e6e..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7723.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7723.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE5_DATA, PTE4_DATA, PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ5_DATA, PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT5_DATA, PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU5_DATA, PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE5_IN, PTE4_IN, PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT5_IN, PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU5_IN, PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE5_OUT, PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ5_OUT, PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT5_OUT, PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU5_OUT, PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE5_FN, PTE4_FN, PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN, PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ5_FN, PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT5_FN, PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU5_FN, PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_PSA14_FN1, PSA15_PSA14_FN2,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2,
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2,
- PSB15_PSB14_FN1, PSB15_PSB14_FN2,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS,
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2,
- PSC15_PSC14_FN1, PSC15_PSC14_FN2,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3,
- PSD15_PSD14_FN1, PSD15_PSD14_FN2,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_PTT_TXD_MARK, SCIF0_PTT_RXD_MARK,
- SCIF0_PTT_SCK_MARK, SCIF0_PTU_TXD_MARK,
- SCIF0_PTU_RXD_MARK, SCIF0_PTU_SCK_MARK,
-
- SCIF1_PTS_TXD_MARK, SCIF1_PTS_RXD_MARK,
- SCIF1_PTS_SCK_MARK, SCIF1_PTV_TXD_MARK,
- SCIF1_PTV_RXD_MARK, SCIF1_PTV_SCK_MARK,
-
- SCIF2_PTT_TXD_MARK, SCIF2_PTT_RXD_MARK,
- SCIF2_PTT_SCK_MARK, SCIF2_PTU_TXD_MARK,
- SCIF2_PTU_RXD_MARK, SCIF2_PTU_SCK_MARK,
-
- SCIF3_PTS_TXD_MARK, SCIF3_PTS_RXD_MARK,
- SCIF3_PTS_SCK_MARK, SCIF3_PTS_RTS_MARK,
- SCIF3_PTS_CTS_MARK, SCIF3_PTV_TXD_MARK,
- SCIF3_PTV_RXD_MARK, SCIF3_PTV_SCK_MARK,
- SCIF3_PTV_RTS_MARK, SCIF3_PTV_CTS_MARK,
-
- SCIF4_PTE_TXD_MARK, SCIF4_PTE_RXD_MARK,
- SCIF4_PTE_SCK_MARK, SCIF4_PTN_TXD_MARK,
- SCIF4_PTN_RXD_MARK, SCIF4_PTN_SCK_MARK,
-
- SCIF5_PTE_TXD_MARK, SCIF5_PTE_RXD_MARK,
- SCIF5_PTE_SCK_MARK, SCIF5_PTN_TXD_MARK,
- SCIF5_PTN_RXD_MARK, SCIF5_PTN_SCK_MARK,
-
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_FLD_MARK, VIO_CKO_MARK,
- VIO_VD1_MARK, VIO_HD1_MARK, VIO_CLK1_MARK,
- VIO_HD2_MARK, VIO_VD2_MARK, VIO_CLK2_MARK,
-
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDLCLK_PTR_MARK, LCDLCLK_PTW_MARK,
-
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
-
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK,
-
- SDHI0CD_PTD_MARK, SDHI0WP_PTD_MARK,
- SDHI0D3_PTD_MARK, SDHI0D2_PTD_MARK,
- SDHI0D1_PTD_MARK, SDHI0D0_PTD_MARK,
- SDHI0CMD_PTD_MARK, SDHI0CLK_PTD_MARK,
-
- SDHI0CD_PTS_MARK, SDHI0WP_PTS_MARK,
- SDHI0D3_PTS_MARK, SDHI0D2_PTS_MARK,
- SDHI0D1_PTS_MARK, SDHI0D0_PTS_MARK,
- SDHI0CMD_PTS_MARK, SDHI0CLK_PTS_MARK,
-
- SDHI1CD_MARK, SDHI1WP_MARK, SDHI1D3_MARK, SDHI1D2_MARK,
- SDHI1D1_MARK, SDHI1D0_MARK, SDHI1CMD_MARK, SDHI1CLK_MARK,
-
- SIUAFCK_MARK, SIUAILR_MARK, SIUAIBT_MARK, SIUAISLD_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAOSLD_MARK, SIUAMCK_MARK,
- SIUAISPD_MARK, SIUAOSPD_MARK,
-
- SIUBFCK_MARK, SIUBILR_MARK, SIUBIBT_MARK, SIUBISLD_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBOSLD_MARK, SIUBMCK_MARK,
-
- IRDA_IN_MARK, IRDA_OUT_MARK,
-
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
-
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
-
- MSIOF0_PTF_TXD_MARK, MSIOF0_PTF_RXD_MARK, MSIOF0_PTF_MCK_MARK,
- MSIOF0_PTF_TSYNC_MARK, MSIOF0_PTF_TSCK_MARK, MSIOF0_PTF_RSYNC_MARK,
- MSIOF0_PTF_RSCK_MARK, MSIOF0_PTF_SS1_MARK, MSIOF0_PTF_SS2_MARK,
-
- MSIOF0_PTT_TXD_MARK, MSIOF0_PTT_RXD_MARK, MSIOF0_PTX_MCK_MARK,
- MSIOF0_PTT_TSYNC_MARK, MSIOF0_PTT_TSCK_MARK, MSIOF0_PTT_RSYNC_MARK,
- MSIOF0_PTT_RSCK_MARK, MSIOF0_PTT_SS1_MARK, MSIOF0_PTT_SS2_MARK,
-
- MSIOF1_TXD_MARK, MSIOF1_RXD_MARK, MSIOF1_MCK_MARK,
- MSIOF1_TSYNC_MARK, MSIOF1_TSCK_MARK, MSIOF1_RSYNC_MARK,
- MSIOF1_RSCK_MARK, MSIOF1_SS1_MARK, MSIOF1_SS2_MARK,
-
- TS0_SDAT_MARK, TS0_SCK_MARK, TS0_SDEN_MARK, TS0_SPSYNC_MARK,
-
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
-
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
-
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
-
- STATUS0_MARK, PDSTATUS_MARK,
-
- TPUTO3_MARK, TPUTO2_MARK, TPUTO1_MARK, TPUTO0_MARK,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, WAIT_MARK, BS_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- CS6B_CE1B_MARK, CS6A_CE2B_MARK,
- CS5B_CE1A_MARK, CS5A_CE2A_MARK,
- WE3_ICIOWR_MARK, WE2_ICIORD_MARK,
-
- IDED15_MARK, IDED14_MARK, IDED13_MARK, IDED12_MARK,
- IDED11_MARK, IDED10_MARK, IDED9_MARK, IDED8_MARK,
- IDED7_MARK, IDED6_MARK, IDED5_MARK, IDED4_MARK,
- IDED3_MARK, IDED2_MARK, IDED1_MARK, IDED0_MARK,
- DIRECTION_MARK, EXBUF_ENB_MARK, IDERST_MARK, IODACK_MARK,
- IODREQ_MARK, IDEIORDY_MARK, IDEINT_MARK, IDEIOWR_MARK,
- IDEIORD_MARK, IDECS1_MARK, IDECS0_MARK, IDEA2_MARK,
- IDEA1_MARK, IDEA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_PSA14_FN1, PTA7_FN),
- PINMUX_DATA(KEYOUT2_MARK, PSA15_PSA14_FN2, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_PSA14_FN1, PTA6_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_PSA14_FN2, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_PSA14_FN1, PTA5_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_PSA14_FN2, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_PSA14_FN1, PTA4_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_PSA14_FN2, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_PSA14_FN1, PTA3_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_PSA14_FN2, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_PSA14_FN1, PTA2_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_PSA14_FN2, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_PSA14_FN1, PTA1_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_PSA14_FN2, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_PSA14_FN1, PTA0_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_PSA14_FN2, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_PSA14_FN1, PTB2_FN),
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_PSA14_FN2, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_PSA14_FN1, PTB1_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_PSA14_FN2, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_PSA14_FN1, PTB0_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_PSA14_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IDED15_MARK, PSA11_PSA10_FN1, PTC7_FN),
- PINMUX_DATA(SDHI1CD_MARK, PSA11_PSA10_FN2, PTC7_FN),
- PINMUX_DATA(IDED14_MARK, PSA11_PSA10_FN1, PTC6_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSA11_PSA10_FN2, PTC6_FN),
- PINMUX_DATA(IDED13_MARK, PSA11_PSA10_FN1, PTC5_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSA11_PSA10_FN2, PTC5_FN),
- PINMUX_DATA(IDED12_MARK, PSA11_PSA10_FN1, PTC4_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSA11_PSA10_FN2, PTC4_FN),
- PINMUX_DATA(IDED11_MARK, PSA11_PSA10_FN1, PTC3_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA11_PSA10_FN2, PTC3_FN),
- PINMUX_DATA(IDED10_MARK, PSA11_PSA10_FN1, PTC2_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA11_PSA10_FN2, PTC2_FN),
- PINMUX_DATA(IDED9_MARK, PSA11_PSA10_FN1, PTC1_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA11_PSA10_FN2, PTC1_FN),
- PINMUX_DATA(IDED8_MARK, PSA11_PSA10_FN1, PTC0_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA11_PSA10_FN2, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(IDED7_MARK, PSA11_PSA10_FN1, PTD7_FN),
- PINMUX_DATA(SDHI0CD_PTD_MARK, PSA11_PSA10_FN2, PTD7_FN),
- PINMUX_DATA(IDED6_MARK, PSA11_PSA10_FN1, PTD6_FN),
- PINMUX_DATA(SDHI0WP_PTD_MARK, PSA11_PSA10_FN2, PTD6_FN),
- PINMUX_DATA(IDED5_MARK, PSA11_PSA10_FN1, PTD5_FN),
- PINMUX_DATA(SDHI0D3_PTD_MARK, PSA11_PSA10_FN2, PTD5_FN),
- PINMUX_DATA(IDED4_MARK, PSA11_PSA10_FN1, PTD4_FN),
- PINMUX_DATA(SDHI0D2_PTD_MARK, PSA11_PSA10_FN2, PTD4_FN),
- PINMUX_DATA(IDED3_MARK, PSA11_PSA10_FN1, PTD3_FN),
- PINMUX_DATA(SDHI0D1_PTD_MARK, PSA11_PSA10_FN2, PTD3_FN),
- PINMUX_DATA(IDED2_MARK, PSA11_PSA10_FN1, PTD2_FN),
- PINMUX_DATA(SDHI0D0_PTD_MARK, PSA11_PSA10_FN2, PTD2_FN),
- PINMUX_DATA(IDED1_MARK, PSA11_PSA10_FN1, PTD1_FN),
- PINMUX_DATA(SDHI0CMD_PTD_MARK, PSA11_PSA10_FN2, PTD1_FN),
- PINMUX_DATA(IDED0_MARK, PSA11_PSA10_FN1, PTD0_FN),
- PINMUX_DATA(SDHI0CLK_PTD_MARK, PSA11_PSA10_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(DIRECTION_MARK, PSA11_PSA10_FN1, PTE5_FN),
- PINMUX_DATA(SCIF5_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE5_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSA11_PSA10_FN1, PTE4_FN),
- PINMUX_DATA(SCIF5_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE4_FN),
- PINMUX_DATA(IDERST_MARK, PSA11_PSA10_FN1, PTE3_FN),
- PINMUX_DATA(SCIF5_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE3_FN),
- PINMUX_DATA(IODACK_MARK, PSA11_PSA10_FN1, PTE2_FN),
- PINMUX_DATA(SCIF4_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE2_FN),
- PINMUX_DATA(IODREQ_MARK, PSA11_PSA10_FN1, PTE1_FN),
- PINMUX_DATA(SCIF4_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE1_FN),
- PINMUX_DATA(IDEIORDY_MARK, PSA11_PSA10_FN1, PTE0_FN),
- PINMUX_DATA(SCIF4_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(IDEINT_MARK, PTF7_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA5_PSA4_FN1, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_SS2_MARK, PSA5_PSA4_FN2, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_RSYNC_MARK, PSA5_PSA4_FN3, PTF6_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA5_PSA4_FN1, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_SS1_MARK, PSA5_PSA4_FN2, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_RSCK_MARK, PSA5_PSA4_FN3, PTF5_FN),
- PINMUX_DATA(IDECS1_MARK, PSA11_PSA10_FN1, PTF4_FN),
- PINMUX_DATA(MSIOF0_PTF_TSYNC_MARK, PSA11_PSA10_FN2, PTF4_FN),
- PINMUX_DATA(IDECS0_MARK, PSA11_PSA10_FN1, PTF3_FN),
- PINMUX_DATA(MSIOF0_PTF_TSCK_MARK, PSA11_PSA10_FN2, PTF3_FN),
- PINMUX_DATA(IDEA2_MARK, PSA11_PSA10_FN1, PTF2_FN),
- PINMUX_DATA(MSIOF0_PTF_RXD_MARK, PSA11_PSA10_FN2, PTF2_FN),
- PINMUX_DATA(IDEA1_MARK, PSA11_PSA10_FN1, PTF1_FN),
- PINMUX_DATA(MSIOF0_PTF_TXD_MARK, PSA11_PSA10_FN2, PTF1_FN),
- PINMUX_DATA(IDEA0_MARK, PSA11_PSA10_FN1, PTF0_FN),
- PINMUX_DATA(MSIOF0_PTF_MCK_MARK, PSA11_PSA10_FN2, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PSA3_PSA2_FN1, PTG3_FN),
- PINMUX_DATA(TPUTO3_MARK, PSA3_PSA2_FN2, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PSA3_PSA2_FN1, PTG2_FN),
- PINMUX_DATA(TPUTO2_MARK, PSA3_PSA2_FN2, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PSA3_PSA2_FN1, PTG1_FN),
- PINMUX_DATA(TPUTO1_MARK, PSA3_PSA2_FN2, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PSA3_PSA2_FN1, PTG0_FN),
- PINMUX_DATA(TPUTO0_MARK, PSA3_PSA2_FN2, PTG0_FN),
-
- /* PTG FN */
- PINMUX_DATA(LCDVCPWC_MARK, PTH7_FN),
- PINMUX_DATA(LCDRD_MARK, PSB15_PSB14_FN1, PTH6_FN),
- PINMUX_DATA(DV_CLKI_MARK, PSB15_PSB14_FN2, PTH6_FN),
- PINMUX_DATA(LCDVSYN_MARK, PSB15_PSB14_FN1, PTH5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSB15_PSB14_FN2, PTH5_FN),
- PINMUX_DATA(LCDDISP_MARK, PSB13_PSB12_LCDC_RGB, PTH4_FN),
- PINMUX_DATA(LCDRS_MARK, PSB13_PSB12_LCDC_SYS, PTH4_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSB13_PSB12_LCDC_RGB, PTH3_FN),
- PINMUX_DATA(LCDCS_MARK, PSB13_PSB12_LCDC_SYS, PTH3_FN),
- PINMUX_DATA(LCDDON_MARK, PTH2_FN),
- PINMUX_DATA(LCDDCK_MARK, PSB13_PSB12_LCDC_RGB, PTH1_FN),
- PINMUX_DATA(LCDWR_MARK, PSB13_PSB12_LCDC_SYS, PTH1_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(STATUS0_MARK, PTJ7_FN),
- PINMUX_DATA(PDSTATUS_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(SIUAFCK_MARK, PTK7_FN),
- PINMUX_DATA(SIUAILR_MARK, PSB9_PSB8_FN1, PTK6_FN),
- PINMUX_DATA(MSIOF1_SS2_MARK, PSB9_PSB8_FN2, PTK6_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSB9_PSB8_FN3, PTK6_FN),
- PINMUX_DATA(SIUAIBT_MARK, PSB9_PSB8_FN1, PTK5_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSB9_PSB8_FN2, PTK5_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSB9_PSB8_FN3, PTK5_FN),
- PINMUX_DATA(SIUAISLD_MARK, PSB7_PSB6_FN1, PTK4_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK4_FN),
- PINMUX_DATA(SIUAOLR_MARK, PSB7_PSB6_FN1, PTK3_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSB7_PSB6_FN2, PTK3_FN),
- PINMUX_DATA(SIUAOBT_MARK, PSB7_PSB6_FN1, PTK2_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSB7_PSB6_FN2, PTK2_FN),
- PINMUX_DATA(SIUAOSLD_MARK, PSB7_PSB6_FN1, PTK1_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK1_FN),
- PINMUX_DATA(SIUAMCK_MARK, PSB7_PSB6_FN1, PTK0_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSB7_PSB6_FN2, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(LCDD15_MARK, PSB5_PSB4_FN1, PTL7_FN),
- PINMUX_DATA(DV_D15_MARK, PSB5_PSB4_FN2, PTL7_FN),
- PINMUX_DATA(LCDD14_MARK, PSB5_PSB4_FN1, PTL6_FN),
- PINMUX_DATA(DV_D14_MARK, PSB5_PSB4_FN2, PTL6_FN),
- PINMUX_DATA(LCDD13_MARK, PSB5_PSB4_FN1, PTL5_FN),
- PINMUX_DATA(DV_D13_MARK, PSB5_PSB4_FN2, PTL5_FN),
- PINMUX_DATA(LCDD12_MARK, PSB5_PSB4_FN1, PTL4_FN),
- PINMUX_DATA(DV_D12_MARK, PSB5_PSB4_FN2, PTL4_FN),
- PINMUX_DATA(LCDD11_MARK, PSB5_PSB4_FN1, PTL3_FN),
- PINMUX_DATA(DV_D11_MARK, PSB5_PSB4_FN2, PTL3_FN),
- PINMUX_DATA(LCDD10_MARK, PSB5_PSB4_FN1, PTL2_FN),
- PINMUX_DATA(DV_D10_MARK, PSB5_PSB4_FN2, PTL2_FN),
- PINMUX_DATA(LCDD9_MARK, PSB5_PSB4_FN1, PTL1_FN),
- PINMUX_DATA(DV_D9_MARK, PSB5_PSB4_FN2, PTL1_FN),
- PINMUX_DATA(LCDD8_MARK, PSB5_PSB4_FN1, PTL0_FN),
- PINMUX_DATA(DV_D8_MARK, PSB5_PSB4_FN2, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(LCDD7_MARK, PSB5_PSB4_FN1, PTM7_FN),
- PINMUX_DATA(DV_D7_MARK, PSB5_PSB4_FN2, PTM7_FN),
- PINMUX_DATA(LCDD6_MARK, PSB5_PSB4_FN1, PTM6_FN),
- PINMUX_DATA(DV_D6_MARK, PSB5_PSB4_FN2, PTM6_FN),
- PINMUX_DATA(LCDD5_MARK, PSB5_PSB4_FN1, PTM5_FN),
- PINMUX_DATA(DV_D5_MARK, PSB5_PSB4_FN2, PTM5_FN),
- PINMUX_DATA(LCDD4_MARK, PSB5_PSB4_FN1, PTM4_FN),
- PINMUX_DATA(DV_D4_MARK, PSB5_PSB4_FN2, PTM4_FN),
- PINMUX_DATA(LCDD3_MARK, PSB5_PSB4_FN1, PTM3_FN),
- PINMUX_DATA(DV_D3_MARK, PSB5_PSB4_FN2, PTM3_FN),
- PINMUX_DATA(LCDD2_MARK, PSB5_PSB4_FN1, PTM2_FN),
- PINMUX_DATA(DV_D2_MARK, PSB5_PSB4_FN2, PTM2_FN),
- PINMUX_DATA(LCDD1_MARK, PSB5_PSB4_FN1, PTM1_FN),
- PINMUX_DATA(DV_D1_MARK, PSB5_PSB4_FN2, PTM1_FN),
- PINMUX_DATA(LCDD0_MARK, PSB5_PSB4_FN1, PTM0_FN),
- PINMUX_DATA(DV_D0_MARK, PSB5_PSB4_FN2, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(LCDD23_MARK, PSB3_PSB2_FN1, PTN7_FN),
- PINMUX_DATA(SCIF5_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN7_FN),
- PINMUX_DATA(LCDD22_MARK, PSB3_PSB2_FN1, PTN6_FN),
- PINMUX_DATA(SCIF5_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN6_FN),
- PINMUX_DATA(LCDD21_MARK, PSB3_PSB2_FN1, PTN5_FN),
- PINMUX_DATA(SCIF5_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN5_FN),
- PINMUX_DATA(LCDD20_MARK, PSB3_PSB2_FN1, PTN4_FN),
- PINMUX_DATA(SCIF4_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN4_FN),
- PINMUX_DATA(LCDD19_MARK, PSB3_PSB2_FN1, PTN3_FN),
- PINMUX_DATA(SCIF4_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN3_FN),
- PINMUX_DATA(LCDD18_MARK, PSB3_PSB2_FN1, PTN2_FN),
- PINMUX_DATA(SCIF4_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN2_FN),
- PINMUX_DATA(LCDD17_MARK, PSB5_PSB4_FN1, PTN1_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSB5_PSB4_FN2, PTN1_FN),
- PINMUX_DATA(LCDD16_MARK, PSB5_PSB4_FN1, PTN0_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_PSB4_FN2, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(AN3_MARK, PTQ3_FN),
- PINMUX_DATA(AN2_MARK, PTQ2_FN),
- PINMUX_DATA(AN1_MARK, PTQ1_FN),
- PINMUX_DATA(AN0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA13_PSA12_FN1, PTR3_FN),
- PINMUX_DATA(LCDLCLK_PTR_MARK, PSA13_PSA12_FN2, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SCIF1_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS7_FN),
- PINMUX_DATA(SDHI0CD_PTS_MARK, PSC15_PSC14_FN2, PTS7_FN),
- PINMUX_DATA(SCIF1_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS6_FN),
- PINMUX_DATA(SDHI0WP_PTS_MARK, PSC15_PSC14_FN2, PTS6_FN),
- PINMUX_DATA(SCIF1_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS5_FN),
- PINMUX_DATA(SDHI0D3_PTS_MARK, PSC15_PSC14_FN2, PTS5_FN),
- PINMUX_DATA(SCIF3_PTS_CTS_MARK, PSC15_PSC14_FN1, PTS4_FN),
- PINMUX_DATA(SDHI0D2_PTS_MARK, PSC15_PSC14_FN2, PTS4_FN),
- PINMUX_DATA(SCIF3_PTS_RTS_MARK, PSC15_PSC14_FN1, PTS3_FN),
- PINMUX_DATA(SDHI0D1_PTS_MARK, PSC15_PSC14_FN2, PTS3_FN),
- PINMUX_DATA(SCIF3_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS2_FN),
- PINMUX_DATA(SDHI0D0_PTS_MARK, PSC15_PSC14_FN2, PTS2_FN),
- PINMUX_DATA(SCIF3_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS1_FN),
- PINMUX_DATA(SDHI0CMD_PTS_MARK, PSC15_PSC14_FN2, PTS1_FN),
- PINMUX_DATA(SCIF3_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS0_FN),
- PINMUX_DATA(SDHI0CLK_PTS_MARK, PSC15_PSC14_FN2, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_PTT_SCK_MARK, PSC13_PSC12_FN1, PTT5_FN),
- PINMUX_DATA(MSIOF0_PTT_TSCK_MARK, PSC13_PSC12_FN2, PTT5_FN),
- PINMUX_DATA(SCIF0_PTT_RXD_MARK, PSC13_PSC12_FN1, PTT4_FN),
- PINMUX_DATA(MSIOF0_PTT_RXD_MARK, PSC13_PSC12_FN2, PTT4_FN),
- PINMUX_DATA(SCIF0_PTT_TXD_MARK, PSC13_PSC12_FN1, PTT3_FN),
- PINMUX_DATA(MSIOF0_PTT_TXD_MARK, PSC13_PSC12_FN2, PTT3_FN),
- PINMUX_DATA(SCIF2_PTT_SCK_MARK, PSC11_PSC10_FN1, PTT2_FN),
- PINMUX_DATA(MSIOF0_PTT_TSYNC_MARK, PSC11_PSC10_FN2, PTT2_FN),
- PINMUX_DATA(SCIF2_PTT_RXD_MARK, PSC11_PSC10_FN1, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_SS1_MARK, PSC11_PSC10_FN2, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_RSCK_MARK, PSC11_PSC10_FN3, PTT1_FN),
- PINMUX_DATA(SCIF2_PTT_TXD_MARK, PSC11_PSC10_FN1, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_SS2_MARK, PSC11_PSC10_FN2, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_RSYNC_MARK, PSC11_PSC10_FN3, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(FCDE_MARK, PSC9_PSC8_FN1, PTU5_FN),
- PINMUX_DATA(SCIF0_PTU_SCK_MARK, PSC9_PSC8_FN2, PTU5_FN),
- PINMUX_DATA(FSC_MARK, PSC9_PSC8_FN1, PTU4_FN),
- PINMUX_DATA(SCIF0_PTU_RXD_MARK, PSC9_PSC8_FN2, PTU4_FN),
- PINMUX_DATA(FWE_MARK, PSC9_PSC8_FN1, PTU3_FN),
- PINMUX_DATA(SCIF0_PTU_TXD_MARK, PSC9_PSC8_FN2, PTU3_FN),
- PINMUX_DATA(FOE_MARK, PSC7_PSC6_FN1, PTU2_FN),
- PINMUX_DATA(SCIF2_PTU_SCK_MARK, PSC7_PSC6_FN2, PTU2_FN),
- PINMUX_DATA(VIO_VD2_MARK, PSC7_PSC6_FN3, PTU2_FN),
- PINMUX_DATA(FRB_MARK, PSC7_PSC6_FN1, PTU1_FN),
- PINMUX_DATA(SCIF2_PTU_RXD_MARK, PSC7_PSC6_FN2, PTU1_FN),
- PINMUX_DATA(VIO_CLK2_MARK, PSC7_PSC6_FN3, PTU1_FN),
- PINMUX_DATA(FCE_MARK, PSC7_PSC6_FN1, PTU0_FN),
- PINMUX_DATA(SCIF2_PTU_TXD_MARK, PSC7_PSC6_FN2, PTU0_FN),
- PINMUX_DATA(VIO_HD2_MARK, PSC7_PSC6_FN3, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(NAF7_MARK, PSC7_PSC6_FN1, PTV7_FN),
- PINMUX_DATA(SCIF1_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV7_FN),
- PINMUX_DATA(VIO_D15_MARK, PSC7_PSC6_FN3, PTV7_FN),
- PINMUX_DATA(NAF6_MARK, PSC7_PSC6_FN1, PTV6_FN),
- PINMUX_DATA(SCIF1_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV6_FN),
- PINMUX_DATA(VIO_D14_MARK, PSC7_PSC6_FN3, PTV6_FN),
- PINMUX_DATA(NAF5_MARK, PSC7_PSC6_FN1, PTV5_FN),
- PINMUX_DATA(SCIF1_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV5_FN),
- PINMUX_DATA(VIO_D13_MARK, PSC7_PSC6_FN3, PTV5_FN),
- PINMUX_DATA(NAF4_MARK, PSC7_PSC6_FN1, PTV4_FN),
- PINMUX_DATA(SCIF3_PTV_CTS_MARK, PSC7_PSC6_FN2, PTV4_FN),
- PINMUX_DATA(VIO_D12_MARK, PSC7_PSC6_FN3, PTV4_FN),
- PINMUX_DATA(NAF3_MARK, PSC7_PSC6_FN1, PTV3_FN),
- PINMUX_DATA(SCIF3_PTV_RTS_MARK, PSC7_PSC6_FN2, PTV3_FN),
- PINMUX_DATA(VIO_D11_MARK, PSC7_PSC6_FN3, PTV3_FN),
- PINMUX_DATA(NAF2_MARK, PSC7_PSC6_FN1, PTV2_FN),
- PINMUX_DATA(SCIF3_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV2_FN),
- PINMUX_DATA(VIO_D10_MARK, PSC7_PSC6_FN3, PTV2_FN),
- PINMUX_DATA(NAF1_MARK, PSC7_PSC6_FN1, PTV1_FN),
- PINMUX_DATA(SCIF3_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV1_FN),
- PINMUX_DATA(VIO_D9_MARK, PSC7_PSC6_FN3, PTV1_FN),
- PINMUX_DATA(NAF0_MARK, PSC7_PSC6_FN1, PTV0_FN),
- PINMUX_DATA(SCIF3_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV0_FN),
- PINMUX_DATA(VIO_D8_MARK, PSC7_PSC6_FN3, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(IRQ7_MARK, PTW7_FN),
- PINMUX_DATA(IRQ6_MARK, PTW6_FN),
- PINMUX_DATA(IRQ5_MARK, PTW5_FN),
- PINMUX_DATA(IRQ4_MARK, PSD15_PSD14_FN1, PTW4_FN),
- PINMUX_DATA(LCDLCLK_PTW_MARK, PSD15_PSD14_FN2, PTW4_FN),
- PINMUX_DATA(IRQ3_MARK, PSD13_PSD12_FN1, PTW3_FN),
- PINMUX_DATA(ADTRG_MARK, PSD13_PSD12_FN2, PTW3_FN),
- PINMUX_DATA(IRQ2_MARK, PSD11_PSD10_FN1, PTW2_FN),
- PINMUX_DATA(BS_MARK, PSD11_PSD10_FN2, PTW2_FN),
- PINMUX_DATA(VIO_CKO_MARK, PSD11_PSD10_FN3, PTW2_FN),
- PINMUX_DATA(IRQ1_MARK, PSD9_PSD8_FN1, PTW1_FN),
- PINMUX_DATA(SIUAISPD_MARK, PSD9_PSD8_FN2, PTW1_FN),
- PINMUX_DATA(IRQ0_MARK, PSD7_PSD6_FN1, PTW0_FN),
- PINMUX_DATA(SIUAOSPD_MARK, PSD7_PSD6_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(DACK1_MARK, PTX7_FN),
- PINMUX_DATA(DREQ1_MARK, PSD3_PSD2_FN1, PTX6_FN),
- PINMUX_DATA(MSIOF0_PTX_MCK_MARK, PSD3_PSD2_FN2, PTX6_FN),
- PINMUX_DATA(DACK1_MARK, PTX5_FN),
- PINMUX_DATA(IRDA_OUT_MARK, PSD5_PSD4_FN2, PTX5_FN),
- PINMUX_DATA(DREQ1_MARK, PTX4_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSD5_PSD4_FN2, PTX4_FN),
- PINMUX_DATA(TS0_SDAT_MARK, PTX3_FN),
- PINMUX_DATA(TS0_SCK_MARK, PTX2_FN),
- PINMUX_DATA(TS0_SDEN_MARK, PTX1_FN),
- PINMUX_DATA(TS0_SPSYNC_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(VIO_D7_MARK, PTY7_FN),
- PINMUX_DATA(VIO_D6_MARK, PTY6_FN),
- PINMUX_DATA(VIO_D5_MARK, PTY5_FN),
- PINMUX_DATA(VIO_D4_MARK, PTY4_FN),
- PINMUX_DATA(VIO_D3_MARK, PTY3_FN),
- PINMUX_DATA(VIO_D2_MARK, PTY2_FN),
- PINMUX_DATA(VIO_D1_MARK, PTY1_FN),
- PINMUX_DATA(VIO_D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(SIUBOBT_MARK, PTZ7_FN),
- PINMUX_DATA(SIUBOLR_MARK, PTZ6_FN),
- PINMUX_DATA(SIUBOSLD_MARK, PTZ5_FN),
- PINMUX_DATA(SIUBMCK_MARK, PTZ4_FN),
- PINMUX_DATA(VIO_FLD_MARK, PSD1_PSD0_FN1, PTZ3_FN),
- PINMUX_DATA(SIUBFCK_MARK, PSD1_PSD0_FN2, PTZ3_FN),
- PINMUX_DATA(VIO_HD1_MARK, PSD1_PSD0_FN1, PTZ2_FN),
- PINMUX_DATA(SIUBILR_MARK, PSD1_PSD0_FN2, PTZ2_FN),
- PINMUX_DATA(VIO_VD1_MARK, PSD1_PSD0_FN1, PTZ1_FN),
- PINMUX_DATA(SIUBIBT_MARK, PSD1_PSD0_FN2, PTZ1_FN),
- PINMUX_DATA(VIO_CLK1_MARK, PSD1_PSD0_FN1, PTZ0_FN),
- PINMUX_DATA(SIUBISLD_MARK, PSD1_PSD0_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_PTT_TXD),
- GPIO_FN(SCIF0_PTT_RXD),
- GPIO_FN(SCIF0_PTT_SCK),
- GPIO_FN(SCIF0_PTU_TXD),
- GPIO_FN(SCIF0_PTU_RXD),
- GPIO_FN(SCIF0_PTU_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_PTS_TXD),
- GPIO_FN(SCIF1_PTS_RXD),
- GPIO_FN(SCIF1_PTS_SCK),
- GPIO_FN(SCIF1_PTV_TXD),
- GPIO_FN(SCIF1_PTV_RXD),
- GPIO_FN(SCIF1_PTV_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_PTT_TXD),
- GPIO_FN(SCIF2_PTT_RXD),
- GPIO_FN(SCIF2_PTT_SCK),
- GPIO_FN(SCIF2_PTU_TXD),
- GPIO_FN(SCIF2_PTU_RXD),
- GPIO_FN(SCIF2_PTU_SCK),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_PTS_TXD),
- GPIO_FN(SCIF3_PTS_RXD),
- GPIO_FN(SCIF3_PTS_SCK),
- GPIO_FN(SCIF3_PTS_RTS),
- GPIO_FN(SCIF3_PTS_CTS),
- GPIO_FN(SCIF3_PTV_TXD),
- GPIO_FN(SCIF3_PTV_RXD),
- GPIO_FN(SCIF3_PTV_SCK),
- GPIO_FN(SCIF3_PTV_RTS),
- GPIO_FN(SCIF3_PTV_CTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_PTE_TXD),
- GPIO_FN(SCIF4_PTE_RXD),
- GPIO_FN(SCIF4_PTE_SCK),
- GPIO_FN(SCIF4_PTN_TXD),
- GPIO_FN(SCIF4_PTN_RXD),
- GPIO_FN(SCIF4_PTN_SCK),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_PTE_TXD),
- GPIO_FN(SCIF5_PTE_RXD),
- GPIO_FN(SCIF5_PTE_SCK),
- GPIO_FN(SCIF5_PTN_TXD),
- GPIO_FN(SCIF5_PTN_RXD),
- GPIO_FN(SCIF5_PTN_SCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK1),
- GPIO_FN(VIO_VD1),
- GPIO_FN(VIO_HD1),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK_PTR),
- GPIO_FN(LCDLCLK_PTW),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* SDHI0 (PTD) */
- GPIO_FN(SDHI0CD_PTD),
- GPIO_FN(SDHI0WP_PTD),
- GPIO_FN(SDHI0D3_PTD),
- GPIO_FN(SDHI0D2_PTD),
- GPIO_FN(SDHI0D1_PTD),
- GPIO_FN(SDHI0D0_PTD),
- GPIO_FN(SDHI0CMD_PTD),
- GPIO_FN(SDHI0CLK_PTD),
-
- /* SDHI0 (PTS) */
- GPIO_FN(SDHI0CD_PTS),
- GPIO_FN(SDHI0WP_PTS),
- GPIO_FN(SDHI0D3_PTS),
- GPIO_FN(SDHI0D2_PTS),
- GPIO_FN(SDHI0D1_PTS),
- GPIO_FN(SDHI0D0_PTS),
- GPIO_FN(SDHI0CMD_PTS),
- GPIO_FN(SDHI0CLK_PTS),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
-
- /* SIUA */
- GPIO_FN(SIUAFCK),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUAMCK),
- GPIO_FN(SIUAISPD),
- GPIO_FN(SIUAOSPD),
-
- /* SIUB */
- GPIO_FN(SIUBFCK),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUBMCK),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-
- /* MSIOF0 (PTF) */
- GPIO_FN(MSIOF0_PTF_TXD),
- GPIO_FN(MSIOF0_PTF_RXD),
- GPIO_FN(MSIOF0_PTF_MCK),
- GPIO_FN(MSIOF0_PTF_TSYNC),
- GPIO_FN(MSIOF0_PTF_TSCK),
- GPIO_FN(MSIOF0_PTF_RSYNC),
- GPIO_FN(MSIOF0_PTF_RSCK),
- GPIO_FN(MSIOF0_PTF_SS1),
- GPIO_FN(MSIOF0_PTF_SS2),
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN(MSIOF0_PTT_TXD),
- GPIO_FN(MSIOF0_PTT_RXD),
- GPIO_FN(MSIOF0_PTX_MCK),
- GPIO_FN(MSIOF0_PTT_TSYNC),
- GPIO_FN(MSIOF0_PTT_TSCK),
- GPIO_FN(MSIOF0_PTT_RSYNC),
- GPIO_FN(MSIOF0_PTT_RSCK),
- GPIO_FN(MSIOF0_PTT_SS1),
- GPIO_FN(MSIOF0_PTT_SS2),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_RSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
-
- /* TSIF */
- GPIO_FN(TS0_SDAT),
- GPIO_FN(TS0_SCK),
- GPIO_FN(TS0_SDEN),
- GPIO_FN(TS0_SPSYNC),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* TPU */
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO3),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IODREQ),
- GPIO_FN(IDEIORDY),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IDEIORD),
- GPIO_FN(IDECS1),
- GPIO_FN(IDECS0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, -2, 2, -2, 2, 2, 2, 2),
- GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ5_FN, PTJ5_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xa405011a, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTQ3_FN, 0, 0, PTQ3_IN,
- PTQ2_FN, 0, 0, PTQ2_IN,
- PTQ1_FN, 0, 0, PTQ1_IN,
- PTQ0_FN, 0, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, 0, PTS7_IN,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(2, 2, 2, -4, 2, 2, -2),
- GROUP(
- PSA15_PSA14_FN1, PSA15_PSA14_FN2, 0, 0,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2, 0, 0,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2, 0, 0,
- /* RESERVED [4] */
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3, 0,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELB", 0xa4050150, 16,
- GROUP(2, 2, -2, 2, 2, 2, 2, -2),
- GROUP(
- PSB15_PSB14_FN1, PSB15_PSB14_FN2, 0, 0,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS, 0, 0,
- /* RESERVED [2] */
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3, 0,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2, 0, 0,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2, 0, 0,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PSC15_PSC14_FN1, PSC15_PSC14_FN2, 0, 0,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2, 0, 0,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3, 0,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2, 0, 0,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3, 0,
- /* RESERVED [3] */ ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 2, GROUP(
- PSD15_PSD14_FN1, PSD15_PSD14_FN2, 0, 0,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2, 0, 0,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3, 0,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2, 0, 0,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2, 0, 0,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2, 0, 0,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2, 0, 0,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- 0, 0, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, 0, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, 0, 0, 0,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7723_pinmux_info = {
- .name = "sh7723_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7724.c b/drivers/pinctrl/renesas/pfc-sh7724.c
deleted file mode 100644
index 26517ad26a0fd1..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7724.c
+++ /dev/null
@@ -1,2177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7724.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ6_FN, PTJ5_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1,
-
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1,
-
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1,
-
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1,
-
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /*PTA*/
- D23_MARK, KEYOUT2_MARK, IDED15_MARK,
- D22_MARK, KEYOUT1_MARK, IDED14_MARK,
- D21_MARK, KEYOUT0_MARK, IDED13_MARK,
- D20_MARK, KEYIN4_MARK, IDED12_MARK,
- D19_MARK, KEYIN3_MARK, IDED11_MARK,
- D18_MARK, KEYIN2_MARK, IDED10_MARK,
- D17_MARK, KEYIN1_MARK, IDED9_MARK,
- D16_MARK, KEYIN0_MARK, IDED8_MARK,
-
- /*PTB*/
- D31_MARK, TPUTO1_MARK, IDEA1_MARK,
- D30_MARK, TPUTO0_MARK, IDEA0_MARK,
- D29_MARK, IODREQ_MARK,
- D28_MARK, IDECS0_MARK,
- D27_MARK, IDECS1_MARK,
- D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK,
- D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK,
- D24_MARK, KEYOUT3_MARK, IDEINT_MARK,
-
- /*PTC*/
- LCDD7_MARK,
- LCDD6_MARK,
- LCDD5_MARK,
- LCDD4_MARK,
- LCDD3_MARK,
- LCDD2_MARK,
- LCDD1_MARK,
- LCDD0_MARK,
-
- /*PTD*/
- LCDD15_MARK,
- LCDD14_MARK,
- LCDD13_MARK,
- LCDD12_MARK,
- LCDD11_MARK,
- LCDD10_MARK,
- LCDD9_MARK,
- LCDD8_MARK,
-
- /*PTE*/
- FSIMCKB_MARK,
- FSIMCKA_MARK,
- LCDD21_MARK, SCIF2_L_TXD_MARK,
- LCDD20_MARK, SCIF4_SCK_MARK,
- LCDD19_MARK, SCIF4_RXD_MARK,
- LCDD18_MARK, SCIF4_TXD_MARK,
- LCDD17_MARK,
- LCDD16_MARK,
-
- /*PTF*/
- LCDVSYN_MARK,
- LCDDISP_MARK, LCDRS_MARK,
- LCDHSYN_MARK, LCDCS_MARK,
- LCDDON_MARK,
- LCDDCK_MARK, LCDWR_MARK,
- LCDVEPWC_MARK, SCIF0_TXD_MARK,
- LCDD23_MARK, SCIF2_L_SCK_MARK,
- LCDD22_MARK, SCIF2_L_RXD_MARK,
-
- /*PTG*/
- AUDCK_MARK,
- AUDSYNC_MARK,
- AUDATA3_MARK,
- AUDATA2_MARK,
- AUDATA1_MARK,
- AUDATA0_MARK,
-
- /*PTH*/
- VIO0_VD_MARK,
- VIO0_CLK_MARK,
- VIO0_D7_MARK,
- VIO0_D6_MARK,
- VIO0_D5_MARK,
- VIO0_D4_MARK,
- VIO0_D3_MARK,
- VIO0_D2_MARK,
-
- /*PTJ*/
- PDSTATUS_MARK,
- STATUS2_MARK,
- STATUS0_MARK,
- A25_MARK, BS_MARK,
- A24_MARK,
- A23_MARK,
- A22_MARK,
-
- /*PTK*/
- VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK,
- VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK,
- VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK,
- VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK,
- VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK,
- VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK,
- VIO0_FLD_MARK,
- VIO0_HD_MARK,
-
- /*PTL*/
- DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK,
- DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK,
- DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK,
- DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK,
- DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK,
- DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK,
- DV_D15_MARK,
- DV_D14_MARK, MSIOF0_MCK_MARK,
-
- /*PTM*/
- DV_D13_MARK, MSIOF0_TSCK_MARK,
- DV_D12_MARK, MSIOF0_RXD_MARK,
- DV_D11_MARK, MSIOF0_TXD_MARK,
- DV_D10_MARK, MSIOF0_TSYNC_MARK,
- DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK,
- DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK,
- LCDVCPWC_MARK, SCIF0_RXD_MARK,
- LCDRD_MARK, SCIF0_SCK_MARK,
-
- /*PTN*/
- VIO0_D1_MARK,
- VIO0_D0_MARK,
- DV_CLKI_MARK,
- DV_CLK_MARK, SCIF2_V_SCK_MARK,
- DV_VSYNC_MARK, SCIF2_V_RXD_MARK,
- DV_HSYNC_MARK, SCIF2_V_TXD_MARK,
- DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK,
- DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK,
-
- /*PTQ*/
- D7_MARK,
- D6_MARK,
- D5_MARK,
- D4_MARK,
- D3_MARK,
- D2_MARK,
- D1_MARK,
- D0_MARK,
-
- /*PTR*/
- CS6B_CE1B_MARK,
- CS6A_CE2B_MARK,
- CS5B_CE1A_MARK,
- CS5A_CE2A_MARK,
- IOIS16_MARK, LCDLCLK_MARK,
- WAIT_MARK,
- WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK,
- WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK,
-
- /*PTS*/
- VIO_CKO_MARK,
- VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK,
- VIO1_HD_MARK, SCIF5_SCK_MARK,
- VIO1_VD_MARK, SCIF5_RXD_MARK,
- VIO1_CLK_MARK, SCIF5_TXD_MARK,
- VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK,
- VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK,
-
- /*PTT*/
- D15_MARK,
- D14_MARK,
- D13_MARK,
- D12_MARK,
- D11_MARK,
- D10_MARK,
- D9_MARK,
- D8_MARK,
-
- /*PTU*/
- DMAC_DACK0_MARK,
- DMAC_DREQ0_MARK,
- FSIOASD_MARK,
- FSIIABCK_MARK,
- FSIIALRCK_MARK,
- FSIOABCK_MARK,
- FSIOALRCK_MARK,
- CLKAUDIOAO_MARK,
-
- /*PTV*/
- FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK,
- FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK,
- FSIIBBCK_MARK, MSIOF1_RXD_MARK,
- FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK,
- FSIOBBCK_MARK, MSIOF1_TSCK_MARK,
- FSIOBLRCK_MARK, MSIOF1_TXD_MARK,
- CLKAUDIOBO_MARK, MSIOF1_MCK_MARK,
- FSIIASD_MARK,
-
- /*PTW*/
- MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK,
- MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK,
- MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK,
- MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK,
- MMC_D3_MARK, SDHI1D1_MARK,
- MMC_D2_MARK, SDHI1D0_MARK,
- MMC_D1_MARK, SDHI1CMD_MARK,
- MMC_D0_MARK, SDHI1CLK_MARK,
-
- /*PTX*/
- DMAC_DACK1_MARK, IRDA_OUT_MARK,
- DMAC_DREQ1_MARK, IRDA_IN_MARK,
- TSIF_TS0_SDAT_MARK, LNKSTA_MARK,
- TSIF_TS0_SCK_MARK, MDIO_MARK,
- TSIF_TS0_SDEN_MARK, MDC_MARK,
- TSIF_TS0_SPSYNC_MARK,
- MMC_CLK_MARK,
- MMC_CMD_MARK,
-
- /*PTY*/
- SDHI0CD_MARK,
- SDHI0WP_MARK,
- SDHI0D3_MARK,
- SDHI0D2_MARK,
- SDHI0D1_MARK,
- SDHI0D0_MARK,
- SDHI0CMD_MARK,
- SDHI0CLK_MARK,
-
- /*PTZ*/
- INTC_IRQ7_MARK, SCIF3_I_CTS_MARK,
- INTC_IRQ6_MARK, SCIF3_I_RTS_MARK,
- INTC_IRQ5_MARK, SCIF3_I_SCK_MARK,
- INTC_IRQ4_MARK, SCIF3_I_RXD_MARK,
- INTC_IRQ3_MARK, SCIF3_I_TXD_MARK,
- INTC_IRQ2_MARK,
- INTC_IRQ1_MARK,
- INTC_IRQ0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT),
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN),
-
- PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN),
-
- PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN),
- PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN),
- PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN),
- PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN),
- PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN),
- PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN),
- PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN),
- PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN),
- PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN),
- PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN),
- PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN),
- PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN),
- PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN),
- PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN),
- PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN),
- PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN),
- PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN),
- PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN),
-
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
- PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
- PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
- PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
- PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
- PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
- PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
- PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
- PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
- PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
- PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
- PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
- PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
- PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN),
- PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
- PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
-
- PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN),
- PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN),
- PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN),
- PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN),
- PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN),
- PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN),
-
- PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN),
-
- /* PTF FN */
- PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN),
- PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN),
- PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN),
- PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN),
- PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN),
- PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN),
-
- PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN),
- PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN),
- PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN),
-
- PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN),
- PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN),
- PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(VIO0_VD_MARK, PTH7_FN),
- PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
- PINMUX_DATA(VIO0_D7_MARK, PTH5_FN),
- PINMUX_DATA(VIO0_D6_MARK, PTH4_FN),
- PINMUX_DATA(VIO0_D5_MARK, PTH3_FN),
- PINMUX_DATA(VIO0_D4_MARK, PTH2_FN),
- PINMUX_DATA(VIO0_D3_MARK, PTH1_FN),
- PINMUX_DATA(VIO0_D2_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN),
- PINMUX_DATA(STATUS2_MARK, PTJ6_FN),
- PINMUX_DATA(STATUS0_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN),
- PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN),
- PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN),
- PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN),
- PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN),
- PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN),
- PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN),
- PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN),
- PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN),
- PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN),
- PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN),
- PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN),
-
- PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN),
- PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN),
- PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN),
- PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN),
- PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN),
- PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN),
- PINMUX_DATA(VIO0_HD_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN),
- PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN),
- PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN),
- PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN),
- PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN),
- PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN),
- PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN),
- PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN),
-
- PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN),
- PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN),
- PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN),
-
- PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN),
- PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN),
- PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN),
- PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN),
- PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN),
- PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN),
-
- PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN),
- PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN),
- PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN),
- PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN),
- PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN),
- PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN),
- PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN),
- PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN),
- PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN),
- PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN),
- PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN),
- PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN),
- PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN),
- PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN),
-
- PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VIO0_D1_MARK, PTN7_FN),
- PINMUX_DATA(VIO0_D0_MARK, PTN6_FN),
-
- PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN),
- PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN),
- PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN),
-
- PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN),
- PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN),
- PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN),
- PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN),
- PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN),
-
- PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN),
- PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(D7_MARK, PTQ7_FN),
- PINMUX_DATA(D6_MARK, PTQ6_FN),
- PINMUX_DATA(D5_MARK, PTQ5_FN),
- PINMUX_DATA(D4_MARK, PTQ4_FN),
- PINMUX_DATA(D3_MARK, PTQ3_FN),
- PINMUX_DATA(D2_MARK, PTQ2_FN),
- PINMUX_DATA(D1_MARK, PTQ1_FN),
- PINMUX_DATA(D0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN),
-
- PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN),
- PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN),
- PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(VIO_CKO_MARK, PTS6_FN),
-
- PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN),
-
- PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN),
-
- PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN),
- PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN),
- PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN),
- PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN),
- PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN),
- PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN),
-
- PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN),
-
- PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN),
- PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN),
-
- PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN),
- PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(D15_MARK, PTT7_FN),
- PINMUX_DATA(D14_MARK, PTT6_FN),
- PINMUX_DATA(D13_MARK, PTT5_FN),
- PINMUX_DATA(D12_MARK, PTT4_FN),
- PINMUX_DATA(D11_MARK, PTT3_FN),
- PINMUX_DATA(D10_MARK, PTT2_FN),
- PINMUX_DATA(D9_MARK, PTT1_FN),
- PINMUX_DATA(D8_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
- PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
-
- PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN),
- PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN),
- PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN),
- PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN),
- PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN),
- PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN),
- PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN),
- PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN),
- PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN),
- PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN),
- PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN),
- PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN),
- PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN),
-
- PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN),
- PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN),
-
- /* PTW FN */
- PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN),
- PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN),
- PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN),
- PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN),
- PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN),
- PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN),
- PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN),
- PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN),
-
- PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN),
-
- PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN),
- PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN),
- PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN),
-
- /* PTX FN */
- PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN),
- PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN),
-
- PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN),
-
- PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN),
- PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN),
- PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN),
- PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN),
-
- PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN),
- PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN),
- PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN),
-
- PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(SDHI0CD_MARK, PTY7_FN),
- PINMUX_DATA(SDHI0WP_MARK, PTY6_FN),
- PINMUX_DATA(SDHI0D3_MARK, PTY5_FN),
- PINMUX_DATA(SDHI0D2_MARK, PTY4_FN),
- PINMUX_DATA(SDHI0D1_MARK, PTY3_FN),
- PINMUX_DATA(SDHI0D0_MARK, PTY2_FN),
- PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
- PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN),
- PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN),
- PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN),
- PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN),
- PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN),
- PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN),
- PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN),
- PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN),
-
- PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN),
- PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN),
- PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN),
- PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN),
- PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ7),
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
-
- /* KEYSC */
- GPIO_FN(KEYOUT5_IN5),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT0),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IODREQ),
- GPIO_FN(IDECS0),
- GPIO_FN(IDECS1),
- GPIO_FN(IDEIORD),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIORDY),
-
- /* TPU */
- GPIO_FN(TPUTO3),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTI3),
- GPIO_FN(TPUTI2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDVSYN),
- GPIO_FN(LCDDISP),
- GPIO_FN(LCDRS),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDDON),
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDRD),
- GPIO_FN(LCDLCLK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_L_TXD),
- GPIO_FN(SCIF2_L_SCK),
- GPIO_FN(SCIF2_L_RXD),
- GPIO_FN(SCIF2_V_TXD),
- GPIO_FN(SCIF2_V_SCK),
- GPIO_FN(SCIF2_V_RXD),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_V_SCK),
- GPIO_FN(SCIF3_V_RXD),
- GPIO_FN(SCIF3_V_TXD),
- GPIO_FN(SCIF3_V_CTS),
- GPIO_FN(SCIF3_V_RTS),
- GPIO_FN(SCIF3_I_SCK),
- GPIO_FN(SCIF3_I_RXD),
- GPIO_FN(SCIF3_I_TXD),
- GPIO_FN(SCIF3_I_CTS),
- GPIO_FN(SCIF3_I_RTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(SCIF4_TXD),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(SCIF5_TXD),
-
- /* FSI */
- GPIO_FN(FSIMCKB),
- GPIO_FN(FSIMCKA),
- GPIO_FN(FSIOASD),
- GPIO_FN(FSIIABCK),
- GPIO_FN(FSIIALRCK),
- GPIO_FN(FSIOABCK),
- GPIO_FN(FSIOALRCK),
- GPIO_FN(CLKAUDIOAO),
- GPIO_FN(FSIIBSD),
- GPIO_FN(FSIOBSD),
- GPIO_FN(FSIIBBCK),
- GPIO_FN(FSIIBLRCK),
- GPIO_FN(FSIOBBCK),
- GPIO_FN(FSIOBLRCK),
- GPIO_FN(CLKAUDIOBO),
- GPIO_FN(FSIIASD),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* VIO */
- GPIO_FN(VIO_CKO),
-
- /* VIO0 */
- GPIO_FN(VIO0_D15),
- GPIO_FN(VIO0_D14),
- GPIO_FN(VIO0_D13),
- GPIO_FN(VIO0_D12),
- GPIO_FN(VIO0_D11),
- GPIO_FN(VIO0_D10),
- GPIO_FN(VIO0_D9),
- GPIO_FN(VIO0_D8),
- GPIO_FN(VIO0_D7),
- GPIO_FN(VIO0_D6),
- GPIO_FN(VIO0_D5),
- GPIO_FN(VIO0_D4),
- GPIO_FN(VIO0_D3),
- GPIO_FN(VIO0_D2),
- GPIO_FN(VIO0_D1),
- GPIO_FN(VIO0_D0),
- GPIO_FN(VIO0_VD),
- GPIO_FN(VIO0_CLK),
- GPIO_FN(VIO0_FLD),
- GPIO_FN(VIO0_HD),
-
- /* VIO1 */
- GPIO_FN(VIO1_D7),
- GPIO_FN(VIO1_D6),
- GPIO_FN(VIO1_D5),
- GPIO_FN(VIO1_D4),
- GPIO_FN(VIO1_D3),
- GPIO_FN(VIO1_D2),
- GPIO_FN(VIO1_D1),
- GPIO_FN(VIO1_D0),
- GPIO_FN(VIO1_FLD),
- GPIO_FN(VIO1_HD),
- GPIO_FN(VIO1_VD),
- GPIO_FN(VIO1_CLK),
-
- /* Eth */
- GPIO_FN(RMII_RXD0),
- GPIO_FN(RMII_RXD1),
- GPIO_FN(RMII_TXD0),
- GPIO_FN(RMII_TXD1),
- GPIO_FN(RMII_REF_CLK),
- GPIO_FN(RMII_TX_EN),
- GPIO_FN(RMII_RX_ER),
- GPIO_FN(RMII_CRS_DV),
- GPIO_FN(LNKSTA),
- GPIO_FN(MDIO),
- GPIO_FN(MDC),
-
- /* System */
- GPIO_FN(PDSTATUS),
- GPIO_FN(STATUS2),
- GPIO_FN(STATUS0),
-
- /* VOU */
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- /* MSIOF0 */
- GPIO_FN(MSIOF0_RXD),
- GPIO_FN(MSIOF0_TXD),
- GPIO_FN(MSIOF0_MCK),
- GPIO_FN(MSIOF0_TSCK),
- GPIO_FN(MSIOF0_SS1),
- GPIO_FN(MSIOF0_SS2),
- GPIO_FN(MSIOF0_TSYNC),
- GPIO_FN(MSIOF0_RSCK),
- GPIO_FN(MSIOF0_RSYNC),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_RSYNC),
-
- /* DMAC */
- GPIO_FN(DMAC_DACK0),
- GPIO_FN(DMAC_DREQ0),
- GPIO_FN(DMAC_DACK1),
- GPIO_FN(DMAC_DREQ1),
-
- /* SDHI0 */
- GPIO_FN(SDHI0CD),
- GPIO_FN(SDHI0WP),
- GPIO_FN(SDHI0CMD),
- GPIO_FN(SDHI0CLK),
- GPIO_FN(SDHI0D3),
- GPIO_FN(SDHI0D2),
- GPIO_FN(SDHI0D1),
- GPIO_FN(SDHI0D0),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
-
- /* MMC */
- GPIO_FN(MMC_D7),
- GPIO_FN(MMC_D6),
- GPIO_FN(MMC_D5),
- GPIO_FN(MMC_D4),
- GPIO_FN(MMC_D3),
- GPIO_FN(MMC_D2),
- GPIO_FN(MMC_D1),
- GPIO_FN(MMC_D0),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_CMD),
-
- /* IrDA */
- GPIO_FN(IRDA_OUT),
- GPIO_FN(IRDA_IN),
-
- /* TSIF */
- GPIO_FN(TSIF_TS0_SDAT),
- GPIO_FN(TSIF_TS0_SCK),
- GPIO_FN(TSIF_TS0_SDEN),
- GPIO_FN(TSIF_TS0_SPSYNC),
-
- /* IRQ */
- GPIO_FN(INTC_IRQ7),
- GPIO_FN(INTC_IRQ6),
- GPIO_FN(INTC_IRQ5),
- GPIO_FN(INTC_IRQ4),
- GPIO_FN(INTC_IRQ3),
- GPIO_FN(INTC_IRQ2),
- GPIO_FN(INTC_IRQ1),
- GPIO_FN(INTC_IRQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, 0, PTE7_IN,
- PTE6_FN, PTE6_OUT, 0, PTE6_IN,
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, 0,
- PTJ5_FN, PTJ5_OUT, 0, 0,
- 0, 0, 0, 0,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- PTQ7_FN, PTQ7_OUT, 0, PTQ7_IN,
- PTQ6_FN, PTQ6_OUT, 0, PTQ6_IN,
- PTQ5_FN, PTQ5_OUT, 0, PTQ5_IN,
- PTQ4_FN, PTQ4_OUT, 0, PTQ4_IN,
- PTQ3_FN, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2_FN, PTQ2_OUT, 0, PTQ2_IN,
- PTQ1_FN, PTQ1_OUT, 0, PTQ1_IN,
- PTQ0_FN, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, 0, PTT7_IN,
- PTT6_FN, PTT6_OUT, 0, PTT6_IN,
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, 0, PTU7_IN,
- PTU6_FN, PTU6_OUT, 0, PTU6_IN,
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1, GROUP(
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- 0, 0,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- 0, 0,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- 0, 0,
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1))
- },
- { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1, GROUP(
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- 0, 0,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1))
- },
- { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1, GROUP(
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7724_pinmux_info = {
- .name = "sh7724_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7734.c b/drivers/pinctrl/renesas/pfc-sh7734.c
deleted file mode 100644
index 106a500ad13d16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7734.c
+++ /dev/null
@@ -1,2408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/kernel.h>
-#include <cpu/sh7734.h>
-
-#include "sh_pfc.h"
-
-#define CPU_ALL_GP(fn, sfx) \
- PORT_GP_32(0, fn, sfx), \
- PORT_GP_32(1, fn, sfx), \
- PORT_GP_32(2, fn, sfx), \
- PORT_GP_32(3, fn, sfx), \
- PORT_GP_32(4, fn, sfx), \
- PORT_GP_12(5, fn, sfx)
-
-#undef _GP_DATA
-#define _GP_DATA(bank, pin, name, sfx, cfg) \
- PINMUX_DATA(name##_DATA, name##_FN, name##_IN, name##_OUT)
-
-#define _GP_INOUTSEL(bank, pin, name, sfx, cfg) name##_IN, name##_OUT
-#define _GP_INDT(bank, pin, name, sfx, cfg) name##_DATA
-#define GP_INOUTSEL(bank) PORT_GP_32_REV(bank, _GP_INOUTSEL, unused)
-#define GP_INDT(bank) PORT_GP_32_REV(bank, _GP_INDT, unused)
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- GP_ALL(DATA), /* GP_0_0_DATA -> GP_5_11_DATA */
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- GP_ALL(IN), /* GP_0_0_IN -> GP_5_11_IN */
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- GP_ALL(OUT), /* GP_0_0_OUT -> GP_5_11_OUT */
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- GP_ALL(FN), /* GP_0_0_FN -> GP_5_11_FN */
-
- /* GPSR0 */
- FN_IP1_9_8, FN_IP1_11_10, FN_IP1_13_12, FN_IP1_15_14,
- FN_IP0_7_6, FN_IP0_9_8, FN_IP0_11_10, FN_IP0_13_12,
- FN_IP0_15_14, FN_IP0_17_16, FN_IP0_19_18, FN_IP0_21_20,
- FN_IP0_23_22, FN_IP0_25_24, FN_IP0_27_26, FN_IP0_29_28,
- FN_IP0_31_30, FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4,
- FN_IP1_7_6, FN_IP11_28, FN_IP0_1_0, FN_IP0_3_2,
- FN_IP0_5_4, FN_IP1_17_16, FN_IP1_19_18, FN_IP1_22_20,
- FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0,
-
- /* GPSR1 */
- FN_IP3_20, FN_IP3_29_27, FN_IP11_20_19, FN_IP11_22_21,
- FN_IP2_16_14, FN_IP2_19_17, FN_IP2_22_20, FN_IP2_24_23,
- FN_IP2_27_25, FN_IP2_30_28, FN_IP3_1_0, FN_CLKOUT,
- FN_BS, FN_CS0, FN_IP3_2, FN_EX_CS0,
- FN_IP3_5_3, FN_IP3_8_6, FN_IP3_11_9, FN_IP3_14_12,
- FN_IP3_17_15, FN_RD, FN_IP3_19_18, FN_WE0,
- FN_WE1, FN_IP2_4_3, FN_IP3_23_21, FN_IP3_26_24,
- FN_IP2_7_5, FN_IP2_10_8, FN_IP2_13_11, FN_IP11_25_23,
-
- /* GPSR2 */
- FN_IP11_6_4, FN_IP11_9_7, FN_IP11_11_10, FN_IP4_2_0,
- FN_IP8_29_28, FN_IP11_27_26, FN_IP8_22_20, FN_IP8_25_23,
- FN_IP11_12, FN_IP8_27_26, FN_IP4_5_3, FN_IP4_8_6,
- FN_IP4_11_9, FN_IP4_14_12, FN_IP4_17_15, FN_IP4_19_18,
- FN_IP4_21_20, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
- FN_IP4_29_28, FN_IP4_31_30, FN_IP5_2_0, FN_IP5_5_3,
- FN_IP5_8_6, FN_IP5_11_9, FN_IP5_14_12, FN_IP5_17_15,
- FN_IP5_20_18, FN_IP5_22_21, FN_IP5_24_23, FN_IP5_26_25,
-
- /* GPSR3 */
- FN_IP6_2_0, FN_IP6_5_3, FN_IP6_7_6, FN_IP6_9_8,
- FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14, FN_IP6_17_16,
- FN_IP6_20_18, FN_IP6_23_21, FN_IP7_2_0, FN_IP7_5_3,
- FN_IP7_8_6, FN_IP7_11_9, FN_IP7_14_12, FN_IP7_17_15,
- FN_IP7_20_18, FN_IP7_23_21, FN_IP7_26_24, FN_IP7_28_27,
- FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4,
- FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12,
- FN_IP8_15_14, FN_IP8_17_16, FN_IP8_19_18, FN_IP9_1_0,
-
- /* GPSR4 */
- FN_IP9_19_18, FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24,
- FN_IP9_11_10, FN_IP9_13_12, FN_IP9_15_14, FN_IP9_17_16,
- FN_IP9_3_2, FN_IP9_5_4, FN_IP9_7_6, FN_IP9_9_8,
- FN_IP9_27_26, FN_IP9_29_28, FN_IP10_2_0, FN_IP10_5_3,
- FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_15,
- FN_IP10_18_16, FN_IP10_21_19, FN_IP11_0, FN_IP11_1,
- FN_SCL0, FN_IP11_2, FN_PENC0, FN_IP11_15_13, /* Need check*/
- FN_USB_OVC0, FN_IP11_18_16,
- FN_IP10_22, FN_IP10_24_23,
-
- /* GPSR5 */
- FN_IP10_25, FN_IP11_3, FN_IRQ2_B, FN_IRQ3_B,
- FN_IP10_27_26, /* 10 */
- FN_IP10_29_28, /* 11 */
-
- /* IPSR0 */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A, FN_TIOC3D_C,
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C,
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C,
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C,
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C,
-
- /* IPSR1 */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6, FN_FD3_A,
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5, FN_FD2_A,
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4, FN_FD1_A,
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3, FN_FD0_A,
- FN_A25, FN_TX2_D, FN_ST1_D2,
- FN_A24, FN_RX2_D, FN_ST1_D1,
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A,
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A,
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A,
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A,
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C,
-
- /* IPSR2 */
- FN_D14, FN_TX2_B, FN_FSE_A, FN_ET0_TX_CLK_B,
- FN_D13, FN_RX2_B, FN_FRB_A, FN_ET0_ETXD6_B,
- FN_D12, FN_FWE_A, FN_ET0_ETXD5_B,
- FN_D11, FN_RSPI_MISO_A, FN_QMI_QIO1_A, FN_FRE_A,
- FN_ET0_ETXD3_B,
- FN_D10, FN_RSPI_MOSI_A, FN_QMO_QIO0_A, FN_FALE_A,
- FN_ET0_ETXD2_B,
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A, FN_FCLE_A,
- FN_ET0_ETXD1_B,
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A, FN_FCE_A,
- FN_ET0_GTX_CLK_B,
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A, FN_FD7_A,
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A, FN_FD6_A,
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7, FN_FD4_A,
-
- /* IPSR3 */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A, FN_ET0_ETXD7,
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A,
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A,
- FN_EX_WAIT0, FN_TCLK1_B,
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B, FN_ET0_ETXD3_A,
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B, FN_ET0_ETXD2_A,
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B, FN_ET0_ETXD1_A,
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B, FN_ET0_GTX_CLK_A,
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B, FN_ET0_ETXD0,
- FN_CS1_A26, FN_QIO3_B,
- FN_D15, FN_SCK2_B,
-
- /* IPSR4 */
- FN_SCK2_A, FN_VI0_G3,
- FN_RTS1_B, FN_VI0_G2,
- FN_CTS1_B, FN_VI0_DATA7_VI0_G1,
- FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A, FN_ET0_MDC,
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A, FN_ET0_COL,
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A, FN_ET0_CRS,
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A, FN_ET0_RX_ER,
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A, FN_ET0_RX_DV,
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A, FN_ET0_ERXD7,
-
- /* IPSR5 */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, FN_ET0_RX_CLK_B,
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, FN_ET0_ERXD2_B,
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, FN_ET0_ERXD3_B,
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, FN_ET0_MDIO_B,
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, FN_ET0_LINK_B,
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, FN_ET0_MAGIC_B,
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, FN_ET0_PHY_INT_B,
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5,
- FN_REF125CK, FN_ADTRG, FN_RX5_C,
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D,
-
- /* IPSR6 */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A, FN_TCLKA_A, FN_HIFD00,
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A, FN_TCLKB_A, FN_HIFD01,
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A, FN_TIOC1A_A, FN_HIFD08,
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A, FN_HIFD09,
-
- /* IPSR7 */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A, FN_HIFD10,
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A, FN_HIFD11,
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A, FN_HIFD12,
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A, FN_HIFD13,
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A, FN_HIFD14,
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A, FN_HIFD15,
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A, FN_HIFCS,
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A, FN_HIFRS,
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A, FN_HIFWR,
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- FN_DU0_DB4, FN_HIFINT,
-
- /* IPSR8 */
- FN_DU0_DB5, FN_HIFDREQ,
- FN_DU0_DB6, FN_HIFRDY,
- FN_DU0_DB7, FN_SSI_SCK0_B, FN_HIFEBL_B,
- FN_DU0_DOTCLKIN, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- FN_DU0_DOTCLKOUT, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- FN_DU0_EXHSYNC_DU0_HSYNC, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- FN_DU0_EXVSYNC_DU0_VSYNC, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B, FN_SSI_SDATA1_B,
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- FN_IRQ0_A, FN_HSPI_TX_B, FN_RX3_E, FN_ET0_ERXD0,
- FN_IRQ1_A, FN_HSPI_RX_B, FN_TX3_E, FN_ET0_ERXD1,
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- FN_VI1_CLK_A, FN_FD0_B, FN_LCD_DATA0_B,
- FN_VI1_0_A, FN_FD1_B, FN_LCD_DATA1_B,
- FN_VI1_1_A, FN_FD2_B, FN_LCD_DATA2_B,
- FN_VI1_2_A, FN_FD3_B, FN_LCD_DATA3_B,
- FN_VI1_3_A, FN_FD4_B, FN_LCD_DATA4_B,
- FN_VI1_4_A, FN_FD5_B, FN_LCD_DATA5_B,
- FN_VI1_5_A, FN_FD6_B, FN_LCD_DATA6_B,
- FN_VI1_6_A, FN_FD7_B, FN_LCD_DATA7_B,
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B,
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B,
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B,
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B,
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B,
-
- /* IPSR10 */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B, FN_LCD_DATA15_B,
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B, FN_LCD_DON_B,
- FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B, FN_LCD_CL1_B,
- FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B, FN_LCD_CL2_B,
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B, FN_LCD_FLM_B,
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B, FN_LCD_VEPWC_B,
- FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B, FN_LCD_M_DISP_B,
- FN_CAN_CLK_A, FN_RX4_D,
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK,
- FN_CAN1_RX_A, FN_IRQ1_B,
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG,
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT,
-
- /* IPSR11 */
- FN_SCL1, FN_SCIF_CLK_C,
- FN_SDA1, FN_RX1_E,
- FN_SDA0, FN_HIFEBL_A,
- FN_SDSELF, FN_RTS1_E,
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A, FN_ET0_ERXD4,
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A, FN_ET0_ERXD5,
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- FN_TX0_A, FN_HSPI_TX_A,
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D, FN_IETX_B,
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D, FN_IERX_B,
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN,
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER,
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C, FN_ET0_TX_CLK_A,
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- FN_PRESETOUT, FN_ST_CLKOUT,
-
- /* MOD_SEL1 */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2,
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2,
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2,
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- FN_SEL_INTC_0, FN_SEL_INTC_1,
-
- /* MOD_SEL2 */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2,
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2,
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
- FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1,
- FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2,
- FN_SEL_SCIF3_3, FN_SEL_SCIF3_4,
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
- FN_SEL_SCIF2_3,
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2,
- FN_SEL_SCIF1_3, FN_SEL_SCIF1_4,
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- CLKOUT_MARK, BS_MARK, CS0_MARK, EX_CS0_MARK, RD_MARK,
- WE0_MARK, WE1_MARK,
-
- SCL0_MARK, PENC0_MARK, USB_OVC0_MARK,
-
- IRQ2_B_MARK, IRQ3_B_MARK,
-
- /* IPSR0 */
- A15_MARK, ST0_VCO_CLKIN_MARK, LCD_DATA15_A_MARK, TIOC3D_C_MARK,
- A14_MARK, LCD_DATA14_A_MARK, TIOC3C_C_MARK,
- A13_MARK, LCD_DATA13_A_MARK, TIOC3B_C_MARK,
- A12_MARK, LCD_DATA12_A_MARK, TIOC3A_C_MARK,
- A11_MARK, ST0_D7_MARK, LCD_DATA11_A_MARK, TIOC2B_C_MARK,
- A10_MARK, ST0_D6_MARK, LCD_DATA10_A_MARK, TIOC2A_C_MARK,
- A9_MARK, ST0_D5_MARK, LCD_DATA9_A_MARK, TIOC1B_C_MARK,
- A8_MARK, ST0_D4_MARK, LCD_DATA8_A_MARK, TIOC1A_C_MARK,
- A7_MARK, ST0_D3_MARK, LCD_DATA7_A_MARK, TIOC0D_C_MARK,
- A6_MARK, ST0_D2_MARK, LCD_DATA6_A_MARK, TIOC0C_C_MARK,
- A5_MARK, ST0_D1_MARK, LCD_DATA5_A_MARK, TIOC0B_C_MARK,
- A4_MARK, ST0_D0_MARK, LCD_DATA4_A_MARK, TIOC0A_C_MARK,
- A3_MARK, ST0_VLD_MARK, LCD_DATA3_A_MARK, TCLKD_C_MARK,
- A2_MARK, ST0_SYC_MARK, LCD_DATA2_A_MARK, TCLKC_C_MARK,
- A1_MARK, ST0_REQ_MARK, LCD_DATA1_A_MARK, TCLKB_C_MARK,
- A0_MARK, ST0_CLKIN_MARK, LCD_DATA0_A_MARK, TCLKA_C_MARK,
-
- /* IPSR1 */
- D3_MARK, SD0_DAT3_A_MARK, MMC_D3_A_MARK, ST1_D6_MARK, FD3_A_MARK,
- D2_MARK, SD0_DAT2_A_MARK, MMC_D2_A_MARK, ST1_D5_MARK, FD2_A_MARK,
- D1_MARK, SD0_DAT1_A_MARK, MMC_D1_A_MARK, ST1_D4_MARK, FD1_A_MARK,
- D0_MARK, SD0_DAT0_A_MARK, MMC_D0_A_MARK, ST1_D3_MARK, FD0_A_MARK,
- A25_MARK, TX2_D_MARK, ST1_D2_MARK,
- A24_MARK, RX2_D_MARK, ST1_D1_MARK,
- A23_MARK, ST1_D0_MARK, LCD_M_DISP_A_MARK,
- A22_MARK, ST1_VLD_MARK, LCD_VEPWC_A_MARK,
- A21_MARK, ST1_SYC_MARK, LCD_VCPWC_A_MARK,
- A20_MARK, ST1_REQ_MARK, LCD_FLM_A_MARK,
- A19_MARK, ST1_CLKIN_MARK, LCD_CLK_A_MARK, TIOC4D_C_MARK,
- A18_MARK, ST1_PWM_MARK, LCD_CL2_A_MARK, TIOC4C_C_MARK,
- A17_MARK, ST1_VCO_CLKIN_MARK, LCD_CL1_A_MARK, TIOC4B_C_MARK,
- A16_MARK, ST0_PWM_MARK, LCD_DON_A_MARK, TIOC4A_C_MARK,
-
- /* IPSR2 */
- D14_MARK, TX2_B_MARK, FSE_A_MARK, ET0_TX_CLK_B_MARK,
- D13_MARK, RX2_B_MARK, FRB_A_MARK, ET0_ETXD6_B_MARK,
- D12_MARK, FWE_A_MARK, ET0_ETXD5_B_MARK,
- D11_MARK, RSPI_MISO_A_MARK, QMI_QIO1_A_MARK, FRE_A_MARK,
- ET0_ETXD3_B_MARK,
- D10_MARK, RSPI_MOSI_A_MARK, QMO_QIO0_A_MARK, FALE_A_MARK,
- ET0_ETXD2_B_MARK,
- D9_MARK, SD0_CMD_A_MARK, MMC_CMD_A_MARK, QIO3_A_MARK,
- FCLE_A_MARK, ET0_ETXD1_B_MARK,
- D8_MARK, SD0_CLK_A_MARK, MMC_CLK_A_MARK, QIO2_A_MARK,
- FCE_A_MARK, ET0_GTX_CLK_B_MARK,
- D7_MARK, RSPI_SSL_A_MARK, MMC_D7_A_MARK, QSSL_A_MARK,
- FD7_A_MARK,
- D6_MARK, RSPI_RSPCK_A_MARK, MMC_D6_A_MARK, QSPCLK_A_MARK,
- FD6_A_MARK,
- D5_MARK, SD0_WP_A_MARK, MMC_D5_A_MARK, FD5_A_MARK,
- D4_MARK, SD0_CD_A_MARK, MMC_D4_A_MARK, ST1_D7_MARK,
- FD4_A_MARK,
-
- /* IPSR3 */
- DRACK0_MARK, SD1_DAT2_A_MARK, ATAG_MARK, TCLK1_A_MARK, ET0_ETXD7_MARK,
- EX_WAIT2_MARK, SD1_DAT1_A_MARK, DACK2_MARK, CAN1_RX_C_MARK,
- ET0_MAGIC_C_MARK, ET0_ETXD6_A_MARK,
- EX_WAIT1_MARK, SD1_DAT0_A_MARK, DREQ2_MARK, CAN1_TX_C_MARK,
- ET0_LINK_C_MARK, ET0_ETXD5_A_MARK,
- EX_WAIT0_MARK, TCLK1_B_MARK,
- RD_WR_MARK, TCLK0_MARK, CAN_CLK_B_MARK, ET0_ETXD4_MARK,
- EX_CS5_MARK, SD1_CMD_A_MARK, ATADIR_MARK, QSSL_B_MARK,
- ET0_ETXD3_A_MARK,
- EX_CS4_MARK, SD1_WP_A_MARK, ATAWR_MARK, QMI_QIO1_B_MARK,
- ET0_ETXD2_A_MARK,
- EX_CS3_MARK, SD1_CD_A_MARK, ATARD_MARK, QMO_QIO0_B_MARK,
- ET0_ETXD1_A_MARK,
- EX_CS2_MARK, TX3_B_MARK, ATACS1_MARK, QSPCLK_B_MARK,
- ET0_GTX_CLK_A_MARK,
- EX_CS1_MARK, RX3_B_MARK, ATACS0_MARK, QIO2_B_MARK,
- ET0_ETXD0_MARK,
- CS1_A26_MARK, QIO3_B_MARK,
- D15_MARK, SCK2_B_MARK,
-
- /* IPSR4 */
- SCK2_A_MARK, VI0_G3_MARK,
- RTS1_B_MARK, VI0_G2_MARK,
- CTS1_B_MARK, VI0_DATA7_VI0_G1_MARK,
- TX1_B_MARK, VI0_DATA6_VI0_G0_MARK, ET0_PHY_INT_A_MARK,
- RX1_B_MARK, VI0_DATA5_VI0_B5_MARK, ET0_MAGIC_A_MARK,
- SCK1_B_MARK, VI0_DATA4_VI0_B4_MARK, ET0_LINK_A_MARK,
- RTS0_B_MARK, VI0_DATA3_VI0_B3_MARK, ET0_MDIO_A_MARK,
- CTS0_B_MARK, VI0_DATA2_VI0_B2_MARK, RMII0_MDIO_A_MARK,
- ET0_MDC_MARK,
- HTX0_A_MARK, TX1_A_MARK, VI0_DATA1_VI0_B1_MARK,
- RMII0_MDC_A_MARK, ET0_COL_MARK,
- HRX0_A_MARK, RX1_A_MARK, VI0_DATA0_VI0_B0_MARK,
- RMII0_CRS_DV_A_MARK, ET0_CRS_MARK,
- HSCK0_A_MARK, SCK1_A_MARK, VI0_VSYNC_MARK,
- RMII0_RX_ER_A_MARK, ET0_RX_ER_MARK,
- HRTS0_A_MARK, RTS1_A_MARK, VI0_HSYNC_MARK,
- RMII0_TXD_EN_A_MARK, ET0_RX_DV_MARK,
- HCTS0_A_MARK, CTS1_A_MARK, VI0_FIELD_MARK,
- RMII0_RXD1_A_MARK, ET0_ERXD7_MARK,
-
- /* IPSR5 */
- SD2_CLK_A_MARK, RX2_A_MARK, VI0_G4_MARK, ET0_RX_CLK_B_MARK,
- SD2_CMD_A_MARK, TX2_A_MARK, VI0_G5_MARK, ET0_ERXD2_B_MARK,
- SD2_DAT0_A_MARK, RX3_A_MARK, VI0_R0_MARK, ET0_ERXD3_B_MARK,
- SD2_DAT1_A_MARK, TX3_A_MARK, VI0_R1_MARK, ET0_MDIO_B_MARK,
- SD2_DAT2_A_MARK, RX4_A_MARK, VI0_R2_MARK, ET0_LINK_B_MARK,
- SD2_DAT3_A_MARK, TX4_A_MARK, VI0_R3_MARK, ET0_MAGIC_B_MARK,
- SD2_CD_A_MARK, RX5_A_MARK, VI0_R4_MARK, ET0_PHY_INT_B_MARK,
- SD2_WP_A_MARK, TX5_A_MARK, VI0_R5_MARK,
- REF125CK_MARK, ADTRG_MARK, RX5_C_MARK,
- REF50CK_MARK, CTS1_E_MARK, HCTS0_D_MARK,
-
- /* IPSR6 */
- DU0_DR0_MARK, SCIF_CLK_B_MARK, HRX0_D_MARK, IETX_A_MARK,
- TCLKA_A_MARK, HIFD00_MARK,
- DU0_DR1_MARK, SCK0_B_MARK, HTX0_D_MARK, IERX_A_MARK,
- TCLKB_A_MARK, HIFD01_MARK,
- DU0_DR2_MARK, RX0_B_MARK, TCLKC_A_MARK, HIFD02_MARK,
- DU0_DR3_MARK, TX0_B_MARK, TCLKD_A_MARK, HIFD03_MARK,
- DU0_DR4_MARK, CTS0_C_MARK, TIOC0A_A_MARK, HIFD04_MARK,
- DU0_DR5_MARK, RTS0_C_MARK, TIOC0B_A_MARK, HIFD05_MARK,
- DU0_DR6_MARK, SCK1_C_MARK, TIOC0C_A_MARK, HIFD06_MARK,
- DU0_DR7_MARK, RX1_C_MARK, TIOC0D_A_MARK, HIFD07_MARK,
- DU0_DG0_MARK, TX1_C_MARK, HSCK0_D_MARK, IECLK_A_MARK,
- TIOC1A_A_MARK, HIFD08_MARK,
- DU0_DG1_MARK, CTS1_C_MARK, HRTS0_D_MARK, TIOC1B_A_MARK,
- HIFD09_MARK,
-
- /* IPSR7 */
- DU0_DG2_MARK, RTS1_C_MARK, RMII0_MDC_B_MARK, TIOC2A_A_MARK,
- HIFD10_MARK,
- DU0_DG3_MARK, SCK2_C_MARK, RMII0_MDIO_B_MARK, TIOC2B_A_MARK,
- HIFD11_MARK,
- DU0_DG4_MARK, RX2_C_MARK, RMII0_CRS_DV_B_MARK, TIOC3A_A_MARK,
- HIFD12_MARK,
- DU0_DG5_MARK, TX2_C_MARK, RMII0_RX_ER_B_MARK, TIOC3B_A_MARK,
- HIFD13_MARK,
- DU0_DG6_MARK, RX3_C_MARK, RMII0_RXD0_B_MARK, TIOC3C_A_MARK,
- HIFD14_MARK,
- DU0_DG7_MARK, TX3_C_MARK, RMII0_RXD1_B_MARK, TIOC3D_A_MARK,
- HIFD15_MARK,
- DU0_DB0_MARK, RX4_C_MARK, RMII0_TXD_EN_B_MARK, TIOC4A_A_MARK,
- HIFCS_MARK,
- DU0_DB1_MARK, TX4_C_MARK, RMII0_TXD0_B_MARK, TIOC4B_A_MARK,
- HIFRS_MARK,
- DU0_DB2_MARK, RX5_B_MARK, RMII0_TXD1_B_MARK, TIOC4C_A_MARK,
- HIFWR_MARK,
- DU0_DB3_MARK, TX5_B_MARK, TIOC4D_A_MARK, HIFRD_MARK,
- DU0_DB4_MARK, HIFINT_MARK,
-
- /* IPSR8 */
- DU0_DB5_MARK, HIFDREQ_MARK,
- DU0_DB6_MARK, HIFRDY_MARK,
- DU0_DB7_MARK, SSI_SCK0_B_MARK, HIFEBL_B_MARK,
- DU0_DOTCLKIN_MARK, HSPI_CS0_C_MARK, SSI_WS0_B_MARK,
- DU0_DOTCLKOUT_MARK, HSPI_CLK0_C_MARK, SSI_SDATA0_B_MARK,
- DU0_EXHSYNC_DU0_HSYNC_MARK, HSPI_TX0_C_MARK, SSI_SCK1_B_MARK,
- DU0_EXVSYNC_DU0_VSYNC_MARK, HSPI_RX0_C_MARK, SSI_WS1_B_MARK,
- DU0_EXODDF_DU0_ODDF_MARK, CAN0_RX_B_MARK, HSCK0_B_MARK,
- SSI_SDATA1_B_MARK,
- DU0_DISP_MARK, CAN0_TX_B_MARK, HRX0_B_MARK, AUDIO_CLKA_B_MARK,
- DU0_CDE_MARK, HTX0_B_MARK, AUDIO_CLKB_B_MARK, LCD_VCPWC_B_MARK,
- IRQ0_A_MARK, HSPI_TX_B_MARK, RX3_E_MARK, ET0_ERXD0_MARK,
- IRQ1_A_MARK, HSPI_RX_B_MARK, TX3_E_MARK, ET0_ERXD1_MARK,
- IRQ2_A_MARK, CTS0_A_MARK, HCTS0_B_MARK, ET0_ERXD2_A_MARK,
- IRQ3_A_MARK, RTS0_A_MARK, HRTS0_B_MARK, ET0_ERXD3_A_MARK,
-
- /* IPSR9 */
- VI1_CLK_A_MARK, FD0_B_MARK, LCD_DATA0_B_MARK,
- VI1_0_A_MARK, FD1_B_MARK, LCD_DATA1_B_MARK,
- VI1_1_A_MARK, FD2_B_MARK, LCD_DATA2_B_MARK,
- VI1_2_A_MARK, FD3_B_MARK, LCD_DATA3_B_MARK,
- VI1_3_A_MARK, FD4_B_MARK, LCD_DATA4_B_MARK,
- VI1_4_A_MARK, FD5_B_MARK, LCD_DATA5_B_MARK,
- VI1_5_A_MARK, FD6_B_MARK, LCD_DATA6_B_MARK,
- VI1_6_A_MARK, FD7_B_MARK, LCD_DATA7_B_MARK,
- VI1_7_A_MARK, FCE_B_MARK, LCD_DATA8_B_MARK,
- SSI_SCK0_A_MARK, TIOC1A_B_MARK, LCD_DATA9_B_MARK,
- SSI_WS0_A_MARK, TIOC1B_B_MARK, LCD_DATA10_B_MARK,
- SSI_SDATA0_A_MARK, VI1_0_B_MARK, TIOC2A_B_MARK, LCD_DATA11_B_MARK,
- SSI_SCK1_A_MARK, VI1_1_B_MARK, TIOC2B_B_MARK, LCD_DATA12_B_MARK,
- SSI_WS1_A_MARK, VI1_2_B_MARK, LCD_DATA13_B_MARK,
- SSI_SDATA1_A_MARK, VI1_3_B_MARK, LCD_DATA14_B_MARK,
-
- /* IPSR10 */
- SSI_SCK23_MARK, VI1_4_B_MARK, RX1_D_MARK, FCLE_B_MARK,
- LCD_DATA15_B_MARK,
- SSI_WS23_MARK, VI1_5_B_MARK, TX1_D_MARK, HSCK0_C_MARK,
- FALE_B_MARK, LCD_DON_B_MARK,
- SSI_SDATA2_MARK, VI1_6_B_MARK, HRX0_C_MARK, FRE_B_MARK,
- LCD_CL1_B_MARK,
- SSI_SDATA3_MARK, VI1_7_B_MARK, HTX0_C_MARK, FWE_B_MARK,
- LCD_CL2_B_MARK,
- AUDIO_CLKA_A_MARK, VI1_CLK_B_MARK, SCK1_D_MARK, IECLK_B_MARK,
- LCD_FLM_B_MARK,
- AUDIO_CLKB_A_MARK, LCD_CLK_B_MARK,
- AUDIO_CLKC_MARK, SCK1_E_MARK, HCTS0_C_MARK, FRB_B_MARK,
- LCD_VEPWC_B_MARK,
- AUDIO_CLKOUT_MARK, TX1_E_MARK, HRTS0_C_MARK, FSE_B_MARK,
- LCD_M_DISP_B_MARK,
- CAN_CLK_A_MARK, RX4_D_MARK,
- CAN0_TX_A_MARK, TX4_D_MARK, MLB_CLK_MARK,
- CAN1_RX_A_MARK, IRQ1_B_MARK,
- CAN0_RX_A_MARK, IRQ0_B_MARK, MLB_SIG_MARK,
- CAN1_TX_A_MARK, TX5_C_MARK, MLB_DAT_MARK,
-
- /* IPSR11 */
- SCL1_MARK, SCIF_CLK_C_MARK,
- SDA1_MARK, RX1_E_MARK,
- SDA0_MARK, HIFEBL_A_MARK,
- SDSELF_MARK, RTS1_E_MARK,
- SCIF_CLK_A_MARK, HSPI_CLK_A_MARK, VI0_CLK_MARK, RMII0_TXD0_A_MARK,
- ET0_ERXD4_MARK,
- SCK0_A_MARK, HSPI_CS_A_MARK, VI0_CLKENB_MARK, RMII0_TXD1_A_MARK,
- ET0_ERXD5_MARK,
- RX0_A_MARK, HSPI_RX_A_MARK, RMII0_RXD0_A_MARK, ET0_ERXD6_MARK,
- TX0_A_MARK, HSPI_TX_A_MARK,
- PENC1_MARK, TX3_D_MARK, CAN1_TX_B_MARK, TX5_D_MARK,
- IETX_B_MARK,
- USB_OVC1_MARK, RX3_D_MARK, CAN1_RX_B_MARK, RX5_D_MARK,
- IERX_B_MARK,
- DREQ0_MARK, SD1_CLK_A_MARK, ET0_TX_EN_MARK,
- DACK0_MARK, SD1_DAT3_A_MARK, ET0_TX_ER_MARK,
- DREQ1_MARK, HSPI_CLK_B_MARK, RX4_B_MARK, ET0_PHY_INT_C_MARK,
- ET0_TX_CLK_A_MARK,
- DACK1_MARK, HSPI_CS_B_MARK, TX4_B_MARK, ET0_RX_CLK_A_MARK,
- PRESETOUT_MARK, ST_CLKOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
-
- PINMUX_SINGLE(CLKOUT),
- PINMUX_SINGLE(BS),
- PINMUX_SINGLE(CS0),
- PINMUX_SINGLE(EX_CS0),
- PINMUX_SINGLE(RD),
- PINMUX_SINGLE(WE0),
- PINMUX_SINGLE(WE1),
- PINMUX_SINGLE(SCL0),
- PINMUX_SINGLE(PENC0),
- PINMUX_SINGLE(USB_OVC0),
- PINMUX_SINGLE(IRQ2_B),
- PINMUX_SINGLE(IRQ3_B),
-
- /* IPSR0 */
- PINMUX_IPSR_GPSR(IP0_1_0, A0),
- PINMUX_IPSR_GPSR(IP0_1_0, ST0_CLKIN),
- PINMUX_IPSR_MSEL(IP0_1_0, LCD_DATA0_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_1_0, TCLKA_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_3_2, A1),
- PINMUX_IPSR_GPSR(IP0_3_2, ST0_REQ),
- PINMUX_IPSR_MSEL(IP0_3_2, LCD_DATA1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_3_2, TCLKB_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_5_4, A2),
- PINMUX_IPSR_GPSR(IP0_5_4, ST0_SYC),
- PINMUX_IPSR_MSEL(IP0_5_4, LCD_DATA2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_5_4, TCLKC_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_7_6, A3),
- PINMUX_IPSR_GPSR(IP0_7_6, ST0_VLD),
- PINMUX_IPSR_MSEL(IP0_7_6, LCD_DATA3_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_7_6, TCLKD_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_9_8, A4),
- PINMUX_IPSR_GPSR(IP0_9_8, ST0_D0),
- PINMUX_IPSR_MSEL(IP0_9_8, LCD_DATA4_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_9_8, TIOC0A_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_11_10, A5),
- PINMUX_IPSR_GPSR(IP0_11_10, ST0_D1),
- PINMUX_IPSR_MSEL(IP0_11_10, LCD_DATA5_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_11_10, TIOC0B_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_13_12, A6),
- PINMUX_IPSR_GPSR(IP0_13_12, ST0_D2),
- PINMUX_IPSR_MSEL(IP0_13_12, LCD_DATA6_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_13_12, TIOC0C_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_15_14, A7),
- PINMUX_IPSR_GPSR(IP0_15_14, ST0_D3),
- PINMUX_IPSR_MSEL(IP0_15_14, LCD_DATA7_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_15_14, TIOC0D_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_17_16, A8),
- PINMUX_IPSR_GPSR(IP0_17_16, ST0_D4),
- PINMUX_IPSR_MSEL(IP0_17_16, LCD_DATA8_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_17_16, TIOC1A_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_19_18, A9),
- PINMUX_IPSR_GPSR(IP0_19_18, ST0_D5),
- PINMUX_IPSR_MSEL(IP0_19_18, LCD_DATA9_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_19_18, TIOC1B_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_21_20, A10),
- PINMUX_IPSR_GPSR(IP0_21_20, ST0_D6),
- PINMUX_IPSR_MSEL(IP0_21_20, LCD_DATA10_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_21_20, TIOC2A_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_23_22, A11),
- PINMUX_IPSR_GPSR(IP0_23_22, ST0_D7),
- PINMUX_IPSR_MSEL(IP0_23_22, LCD_DATA11_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_23_22, TIOC2B_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_25_24, A12),
- PINMUX_IPSR_MSEL(IP0_25_24, LCD_DATA12_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_25_24, TIOC3A_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_27_26, A13),
- PINMUX_IPSR_MSEL(IP0_27_26, LCD_DATA13_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_27_26, TIOC3B_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_29_28, A14),
- PINMUX_IPSR_MSEL(IP0_29_28, LCD_DATA14_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_29_28, TIOC3C_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_31_30, A15),
- PINMUX_IPSR_GPSR(IP0_31_30, ST0_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP0_31_30, LCD_DATA15_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_31_30, TIOC3D_C, SEL_MTU2_CH3_1),
-
-
- /* IPSR1 */
- PINMUX_IPSR_GPSR(IP1_1_0, A16),
- PINMUX_IPSR_GPSR(IP1_1_0, ST0_PWM),
- PINMUX_IPSR_MSEL(IP1_1_0, LCD_DON_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_1_0, TIOC4A_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_3_2, A17),
- PINMUX_IPSR_GPSR(IP1_3_2, ST1_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP1_3_2, LCD_CL1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_3_2, TIOC4B_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_5_4, A18),
- PINMUX_IPSR_GPSR(IP1_5_4, ST1_PWM),
- PINMUX_IPSR_MSEL(IP1_5_4, LCD_CL2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_5_4, TIOC4C_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_7_6, A19),
- PINMUX_IPSR_GPSR(IP1_7_6, ST1_CLKIN),
- PINMUX_IPSR_MSEL(IP1_7_6, LCD_CLK_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_7_6, TIOC4D_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_9_8, A20),
- PINMUX_IPSR_GPSR(IP1_9_8, ST1_REQ),
- PINMUX_IPSR_MSEL(IP1_9_8, LCD_FLM_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_11_10, A21),
- PINMUX_IPSR_GPSR(IP1_11_10, ST1_SYC),
- PINMUX_IPSR_MSEL(IP1_11_10, LCD_VCPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_13_12, A22),
- PINMUX_IPSR_GPSR(IP1_13_12, ST1_VLD),
- PINMUX_IPSR_MSEL(IP1_13_12, LCD_VEPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_15_14, A23),
- PINMUX_IPSR_GPSR(IP1_15_14, ST1_D0),
- PINMUX_IPSR_MSEL(IP1_15_14, LCD_M_DISP_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_17_16, A24),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D1),
-
- PINMUX_IPSR_GPSR(IP1_19_18, A25),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D2),
-
- PINMUX_IPSR_GPSR(IP1_22_20, D0),
- PINMUX_IPSR_MSEL(IP1_22_20, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_22_20, MMC_D0_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_22_20, ST1_D3),
- PINMUX_IPSR_MSEL(IP1_22_20, FD0_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_25_23, D1),
- PINMUX_IPSR_MSEL(IP1_25_23, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_25_23, MMC_D1_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_25_23, ST1_D4),
- PINMUX_IPSR_MSEL(IP1_25_23, FD1_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_28_26, D2),
- PINMUX_IPSR_MSEL(IP1_28_26, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_28_26, MMC_D2_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_28_26, ST1_D5),
- PINMUX_IPSR_MSEL(IP1_28_26, FD2_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_31_29, D3),
- PINMUX_IPSR_MSEL(IP1_31_29, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_31_29, MMC_D3_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_31_29, ST1_D6),
- PINMUX_IPSR_MSEL(IP1_31_29, FD3_A, SEL_FLCTL_0),
-
- /* IPSR2 */
- PINMUX_IPSR_GPSR(IP2_2_0, D4),
- PINMUX_IPSR_MSEL(IP2_2_0, SD0_CD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_2_0, MMC_D4_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP2_2_0, ST1_D7),
- PINMUX_IPSR_MSEL(IP2_2_0, FD4_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_4_3, D5),
- PINMUX_IPSR_MSEL(IP2_4_3, SD0_WP_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_4_3, MMC_D5_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_4_3, FD5_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_7_5, D6),
- PINMUX_IPSR_MSEL(IP2_7_5, RSPI_RSPCK_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, MMC_D6_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_7_5, QSPCLK_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, FD6_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_10_8, D7),
- PINMUX_IPSR_MSEL(IP2_10_8, RSPI_SSL_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, MMC_D7_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_10_8, QSSL_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, FD7_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_13_11, D8),
- PINMUX_IPSR_MSEL(IP2_13_11, SD0_CLK_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_13_11, MMC_CLK_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_13_11, QIO2_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_13_11, FCE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_13_11, ET0_GTX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_16_14, D9),
- PINMUX_IPSR_MSEL(IP2_16_14, SD0_CMD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_16_14, MMC_CMD_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_16_14, QIO3_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_16_14, FCLE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_16_14, ET0_ETXD1_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_19_17, D10),
- PINMUX_IPSR_MSEL(IP2_19_17, RSPI_MOSI_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, QMO_QIO0_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, FALE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_19_17, ET0_ETXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_22_20, D11),
- PINMUX_IPSR_MSEL(IP2_22_20, RSPI_MISO_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, QMI_QIO1_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, FRE_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_24_23, D12),
- PINMUX_IPSR_MSEL(IP2_24_23, FWE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_24_23, ET0_ETXD5_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_27_25, D13),
- PINMUX_IPSR_MSEL(IP2_27_25, RX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_27_25, FRB_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_27_25, ET0_ETXD6_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_30_28, D14),
- PINMUX_IPSR_MSEL(IP2_30_28, TX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_30_28, FSE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_30_28, ET0_TX_CLK_B, SEL_ET0_1),
-
- /* IPSR3 */
- PINMUX_IPSR_GPSR(IP3_1_0, D15),
- PINMUX_IPSR_MSEL(IP3_1_0, SCK2_B, SEL_SCIF2_1),
-
- PINMUX_IPSR_GPSR(IP3_2, CS1_A26),
- PINMUX_IPSR_MSEL(IP3_2, QIO3_B, SEL_RQSPI_1),
-
- PINMUX_IPSR_GPSR(IP3_5_3, EX_CS1),
- PINMUX_IPSR_MSEL(IP3_5_3, RX3_B, SEL_SCIF2_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ATACS0),
- PINMUX_IPSR_MSEL(IP3_5_3, QIO2_B, SEL_RQSPI_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ET0_ETXD0),
-
- PINMUX_IPSR_GPSR(IP3_8_6, EX_CS2),
- PINMUX_IPSR_MSEL(IP3_8_6, TX3_B, SEL_SCIF3_1),
- PINMUX_IPSR_GPSR(IP3_8_6, ATACS1),
- PINMUX_IPSR_MSEL(IP3_8_6, QSPCLK_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_8_6, ET0_GTX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_11_9, EX_CS3),
- PINMUX_IPSR_MSEL(IP3_11_9, SD1_CD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_11_9, ATARD),
- PINMUX_IPSR_MSEL(IP3_11_9, QMO_QIO0_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_11_9, ET0_ETXD1_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_14_12, EX_CS4),
- PINMUX_IPSR_MSEL(IP3_14_12, SD1_WP_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_14_12, ATAWR),
- PINMUX_IPSR_MSEL(IP3_14_12, QMI_QIO1_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_14_12, ET0_ETXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_17_15, EX_CS5),
- PINMUX_IPSR_MSEL(IP3_17_15, SD1_CMD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_17_15, ATADIR),
- PINMUX_IPSR_MSEL(IP3_17_15, QSSL_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_17_15, ET0_ETXD3_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_19_18, RD_WR),
- PINMUX_IPSR_GPSR(IP3_19_18, TCLK0),
- PINMUX_IPSR_MSEL(IP3_19_18, CAN_CLK_B, SEL_RCAN_CLK_1),
- PINMUX_IPSR_GPSR(IP3_19_18, ET0_ETXD4),
-
- PINMUX_IPSR_GPSR(IP3_20, EX_WAIT0),
- PINMUX_IPSR_MSEL(IP3_20, TCLK1_B, SEL_TMU_1),
-
- PINMUX_IPSR_GPSR(IP3_23_21, EX_WAIT1),
- PINMUX_IPSR_MSEL(IP3_23_21, SD1_DAT0_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_23_21, DREQ2),
- PINMUX_IPSR_MSEL(IP3_23_21, CAN1_TX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_LINK_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_ETXD5_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_26_24, EX_WAIT2),
- PINMUX_IPSR_MSEL(IP3_26_24, SD1_DAT1_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_26_24, DACK2),
- PINMUX_IPSR_MSEL(IP3_26_24, CAN1_RX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_MAGIC_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_ETXD6_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_29_27, DRACK0),
- PINMUX_IPSR_MSEL(IP3_29_27, SD1_DAT2_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ATAG),
- PINMUX_IPSR_MSEL(IP3_29_27, TCLK1_A, SEL_TMU_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ET0_ETXD7),
-
- /* IPSR4 */
- PINMUX_IPSR_MSEL(IP4_2_0, HCTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_2_0, CTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_2_0, VI0_FIELD),
- PINMUX_IPSR_MSEL(IP4_2_0, RMII0_RXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_2_0, ET0_ERXD7),
-
- PINMUX_IPSR_MSEL(IP4_5_3, HRTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_5_3, RTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_5_3, VI0_HSYNC),
- PINMUX_IPSR_MSEL(IP4_5_3, RMII0_TXD_EN_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_5_3, ET0_RX_DV),
-
- PINMUX_IPSR_MSEL(IP4_8_6, HSCK0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_8_6, SCK1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_VSYNC),
- PINMUX_IPSR_MSEL(IP4_8_6, RMII0_RX_ER_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_8_6, ET0_RX_ER),
-
- PINMUX_IPSR_MSEL(IP4_11_9, HRX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_11_9, RX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_11_9, VI0_DATA0_VI0_B0),
- PINMUX_IPSR_MSEL(IP4_11_9, RMII0_CRS_DV_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_11_9, ET0_CRS),
-
- PINMUX_IPSR_MSEL(IP4_14_12, HTX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_14_12, TX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_14_12, VI0_DATA1_VI0_B1),
- PINMUX_IPSR_MSEL(IP4_14_12, RMII0_MDC_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_14_12, ET0_COL),
-
- PINMUX_IPSR_MSEL(IP4_17_15, CTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_17_15, VI0_DATA2_VI0_B2),
- PINMUX_IPSR_MSEL(IP4_17_15, RMII0_MDIO_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_17_15, ET0_MDC),
-
- PINMUX_IPSR_MSEL(IP4_19_18, RTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_19_18, VI0_DATA3_VI0_B3),
- PINMUX_IPSR_MSEL(IP4_19_18, ET0_MDIO_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP4_21_20, SCK1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_21_20, VI0_DATA4_VI0_B4),
- PINMUX_IPSR_MSEL(IP4_21_20, ET0_LINK_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_23_22, RX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_23_22, VI0_DATA5_VI0_B5),
- PINMUX_IPSR_MSEL(IP4_23_22, ET0_MAGIC_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_25_24, TX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_25_24, VI0_DATA6_VI0_G0),
- PINMUX_IPSR_MSEL(IP4_25_24, ET0_PHY_INT_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_27_26, CTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_27_26, VI0_DATA7_VI0_G1),
-
- PINMUX_IPSR_MSEL(IP4_29_28, RTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_29_28, VI0_G2),
-
- PINMUX_IPSR_MSEL(IP4_31_30, SCK2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP4_31_30, VI0_G3),
-
- /* IPSR5 */
- PINMUX_IPSR_MSEL(IP5_2_0, SD2_CLK_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_2_0, RX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_2_0, VI0_G4),
- PINMUX_IPSR_MSEL(IP5_2_0, ET0_RX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_5_3, SD2_CMD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_5_3, TX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_5_3, VI0_G5),
- PINMUX_IPSR_MSEL(IP5_5_3, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_8_6, SD2_DAT0_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_8_6, RX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_R0),
- PINMUX_IPSR_MSEL(IP4_8_6, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_11_9, SD2_DAT1_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_11_9, TX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP5_11_9, VI0_R1),
- PINMUX_IPSR_MSEL(IP5_11_9, ET0_MDIO_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_14_12, SD2_DAT2_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_14_12, RX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_14_12, VI0_R2),
- PINMUX_IPSR_MSEL(IP5_14_12, ET0_LINK_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_17_15, SD2_DAT3_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_17_15, TX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_17_15, VI0_R3),
- PINMUX_IPSR_MSEL(IP5_17_15, ET0_MAGIC_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_20_18, SD2_CD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_20_18, RX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_20_18, VI0_R4),
- PINMUX_IPSR_MSEL(IP5_20_18, ET0_PHY_INT_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_22_21, SD2_WP_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_22_21, TX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_22_21, VI0_R5),
-
- PINMUX_IPSR_GPSR(IP5_24_23, REF125CK),
- PINMUX_IPSR_GPSR(IP5_24_23, ADTRG),
- PINMUX_IPSR_MSEL(IP5_24_23, RX5_C, SEL_SCIF5_2),
- PINMUX_IPSR_GPSR(IP5_26_25, REF50CK),
- PINMUX_IPSR_MSEL(IP5_26_25, CTS1_E, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP5_26_25, HCTS0_D, SEL_HSCIF_3),
-
- /* IPSR6 */
- PINMUX_IPSR_GPSR(IP6_2_0, DU0_DR0),
- PINMUX_IPSR_MSEL(IP6_2_0, SCIF_CLK_B, SEL_SCIF_CLK_1),
- PINMUX_IPSR_MSEL(IP6_2_0, HRX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_2_0, IETX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_2_0, TCLKA_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_2_0, HIFD00),
-
- PINMUX_IPSR_GPSR(IP6_5_3, DU0_DR1),
- PINMUX_IPSR_MSEL(IP6_5_3, SCK0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_5_3, HTX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_5_3, IERX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_5_3, TCLKB_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_5_3, HIFD01),
-
- PINMUX_IPSR_GPSR(IP6_7_6, DU0_DR2),
- PINMUX_IPSR_MSEL(IP6_7_6, RX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_7_6, TCLKC_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_7_6, HIFD02),
-
- PINMUX_IPSR_GPSR(IP6_9_8, DU0_DR3),
- PINMUX_IPSR_MSEL(IP6_9_8, TX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_9_8, TCLKD_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_9_8, HIFD03),
-
- PINMUX_IPSR_GPSR(IP6_11_10, DU0_DR4),
- PINMUX_IPSR_MSEL(IP6_11_10, CTS0_C, SEL_SCIF0_2),
- PINMUX_IPSR_MSEL(IP6_11_10, TIOC0A_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_11_10, HIFD04),
-
- PINMUX_IPSR_GPSR(IP6_13_12, DU0_DR5),
- PINMUX_IPSR_MSEL(IP6_13_12, RTS0_C, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_13_12, TIOC0B_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_13_12, HIFD05),
-
- PINMUX_IPSR_GPSR(IP6_15_14, DU0_DR6),
- PINMUX_IPSR_MSEL(IP6_15_14, SCK1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_15_14, TIOC0C_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_15_14, HIFD06),
-
- PINMUX_IPSR_GPSR(IP6_17_16, DU0_DR7),
- PINMUX_IPSR_MSEL(IP6_17_16, RX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_17_16, TIOC0D_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_17_16, HIFD07),
-
- PINMUX_IPSR_GPSR(IP6_20_18, DU0_DG0),
- PINMUX_IPSR_MSEL(IP6_20_18, TX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_20_18, HSCK0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_20_18, IECLK_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_20_18, TIOC1A_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_20_18, HIFD08),
-
- PINMUX_IPSR_GPSR(IP6_23_21, DU0_DG1),
- PINMUX_IPSR_MSEL(IP6_23_21, CTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_23_21, HRTS0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_23_21, TIOC1B_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_23_21, HIFD09),
-
- /* IPSR7 */
- PINMUX_IPSR_GPSR(IP7_2_0, DU0_DG2),
- PINMUX_IPSR_MSEL(IP7_2_0, RTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP7_2_0, RMII0_MDC_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_2_0, TIOC2A_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_2_0, HIFD10),
-
- PINMUX_IPSR_GPSR(IP7_5_3, DU0_DG3),
- PINMUX_IPSR_MSEL(IP7_5_3, SCK2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_5_3, RMII0_MDIO_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_5_3, TIOC2B_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_5_3, HIFD11),
-
- PINMUX_IPSR_GPSR(IP7_8_6, DU0_DG4),
- PINMUX_IPSR_MSEL(IP7_8_6, RX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_8_6, RMII0_CRS_DV_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_8_6, TIOC3A_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_8_6, HIFD12),
-
- PINMUX_IPSR_GPSR(IP7_11_9, DU0_DG5),
- PINMUX_IPSR_MSEL(IP7_11_9, TX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_11_9, RMII0_RX_ER_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_11_9, TIOC3B_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_11_9, HIFD13),
-
- PINMUX_IPSR_GPSR(IP7_14_12, DU0_DG6),
- PINMUX_IPSR_MSEL(IP7_14_12, RX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_14_12, RMII0_RXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_14_12, TIOC3C_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_14_12, HIFD14),
-
- PINMUX_IPSR_GPSR(IP7_17_15, DU0_DG7),
- PINMUX_IPSR_MSEL(IP7_17_15, TX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_17_15, RMII0_RXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_17_15, TIOC3D_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_17_15, HIFD15),
-
- PINMUX_IPSR_GPSR(IP7_20_18, DU0_DB0),
- PINMUX_IPSR_MSEL(IP7_20_18, RX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_20_18, RMII0_TXD_EN_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_20_18, TIOC4A_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_20_18, HIFCS),
-
- PINMUX_IPSR_GPSR(IP7_23_21, DU0_DB1),
- PINMUX_IPSR_MSEL(IP7_23_21, TX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_23_21, RMII0_TXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_23_21, TIOC4B_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_23_21, HIFWR),
-
- PINMUX_IPSR_GPSR(IP7_26_24, DU0_DB2),
- PINMUX_IPSR_MSEL(IP7_26_24, RX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_26_24, RMII0_TXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_26_24, TIOC4C_A, SEL_MTU2_CH4_0),
-
- PINMUX_IPSR_GPSR(IP7_28_27, DU0_DB3),
- PINMUX_IPSR_MSEL(IP7_28_27, TX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_28_27, TIOC4D_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_28_27, HIFRD),
-
- PINMUX_IPSR_GPSR(IP7_30_29, DU0_DB4),
- PINMUX_IPSR_GPSR(IP7_30_29, HIFINT),
-
- /* IPSR8 */
- PINMUX_IPSR_GPSR(IP8_1_0, DU0_DB5),
- PINMUX_IPSR_GPSR(IP8_1_0, HIFDREQ),
-
- PINMUX_IPSR_GPSR(IP8_3_2, DU0_DB6),
- PINMUX_IPSR_GPSR(IP8_3_2, HIFRDY),
-
- PINMUX_IPSR_GPSR(IP8_5_4, DU0_DB7),
- PINMUX_IPSR_MSEL(IP8_5_4, SSI_SCK0_B, SEL_SSI0_1),
- PINMUX_IPSR_MSEL(IP8_5_4, HIFEBL_B, SEL_HIF_1),
-
- PINMUX_IPSR_GPSR(IP8_7_6, DU0_DOTCLKIN),
- PINMUX_IPSR_MSEL(IP8_7_6, HSPI_CS0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_7_6, SSI_WS0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_9_8, DU0_DOTCLKOUT),
- PINMUX_IPSR_MSEL(IP8_9_8, HSPI_CLK0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_9_8, SSI_SDATA0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_11_10, DU0_EXHSYNC_DU0_HSYNC),
- PINMUX_IPSR_MSEL(IP8_11_10, HSPI_TX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_11_10, SSI_SCK1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_13_12, DU0_EXVSYNC_DU0_VSYNC),
- PINMUX_IPSR_MSEL(IP8_13_12, HSPI_RX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_13_12, SSI_WS1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_15_14, DU0_EXODDF_DU0_ODDF),
- PINMUX_IPSR_MSEL(IP8_15_14, CAN0_RX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_15_14, HSCK0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_15_14, SSI_SDATA1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_17_16, DU0_DISP),
- PINMUX_IPSR_MSEL(IP8_17_16, CAN0_TX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_17_16, HRX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_17_16, AUDIO_CLKA_B, SEL_AUDIO_CLKA_1),
-
- PINMUX_IPSR_GPSR(IP8_19_18, DU0_CDE),
- PINMUX_IPSR_MSEL(IP8_19_18, HTX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_19_18, AUDIO_CLKB_B, SEL_AUDIO_CLKB_1),
- PINMUX_IPSR_MSEL(IP8_19_18, LCD_VCPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP8_22_20, IRQ0_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_22_20, HSPI_TX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_22_20, RX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_22_20, ET0_ERXD0),
-
- PINMUX_IPSR_MSEL(IP8_25_23, IRQ1_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_25_23, HSPI_RX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_25_23, TX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_25_23, ET0_ERXD1),
-
- PINMUX_IPSR_MSEL(IP8_27_26, IRQ2_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_27_26, CTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_27_26, HCTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_27_26, ET0_ERXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP8_29_28, IRQ3_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_29_28, RTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_29_28, HRTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_29_28, ET0_ERXD3_A, SEL_ET0_0),
-
- /* IPSR9 */
- PINMUX_IPSR_MSEL(IP9_1_0, VI1_CLK_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_1_0, FD0_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_1_0, LCD_DATA0_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_3_2, VI1_0_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_3_2, FD1_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_3_2, LCD_DATA1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_5_4, VI1_1_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_5_4, FD2_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_5_4, LCD_DATA2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_7_6, VI1_2_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_7_6, FD3_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_7_6, LCD_DATA3_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_9_8, VI1_3_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_9_8, FD4_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_9_8, LCD_DATA4_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_11_10, VI1_4_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_11_10, FD5_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_11_10, LCD_DATA5_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_13_12, VI1_5_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_13_12, FD6_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_13_12, LCD_DATA6_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_15_14, VI1_6_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_15_14, FD7_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_15_14, LCD_DATA7_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_17_16, VI1_7_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_17_16, FCE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_17_16, LCD_DATA8_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_19_18, SSI_SCK0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_19_18, TIOC1A_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_19_18, LCD_DATA9_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_21_20, SSI_WS0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_21_20, TIOC1B_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_21_20, LCD_DATA10_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_23_22, SSI_SDATA0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_23_22, VI1_0_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_23_22, TIOC2A_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_23_22, LCD_DATA11_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_25_24, SSI_SCK1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_25_24, VI1_1_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_25_24, TIOC2B_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_25_24, LCD_DATA12_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_27_26, SSI_WS1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_27_26, VI1_2_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_27_26, LCD_DATA13_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_29_28, SSI_SDATA1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_29_28, VI1_3_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_29_28, LCD_DATA14_B, SEL_LCDC_1),
-
- /* IPSE10 */
- PINMUX_IPSR_GPSR(IP10_2_0, SSI_SCK23),
- PINMUX_IPSR_MSEL(IP10_2_0, VI1_4_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_2_0, RX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_2_0, FCLE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_2_0, LCD_DATA15_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_5_3, SSI_WS23),
- PINMUX_IPSR_MSEL(IP10_5_3, VI1_5_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_5_3, TX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_5_3, HSCK0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_5_3, FALE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_5_3, LCD_DON_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_8_6, SSI_SDATA2),
- PINMUX_IPSR_MSEL(IP10_8_6, VI1_6_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_8_6, HRX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_8_6, FRE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_8_6, LCD_CL1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_11_9, SSI_SDATA3),
- PINMUX_IPSR_MSEL(IP10_11_9, VI1_7_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_11_9, HTX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_11_9, FWE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_11_9, LCD_CL2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_14_12, AUDIO_CLKA_A, SEL_AUDIO_CLKA_0),
- PINMUX_IPSR_MSEL(IP10_14_12, VI1_CLK_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_14_12, SCK1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_14_12, IECLK_B, SEL_IEBUS_1),
- PINMUX_IPSR_MSEL(IP10_14_12, LCD_FLM_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_15, AUDIO_CLKB_A, SEL_AUDIO_CLKB_0),
- PINMUX_IPSR_MSEL(IP10_15, LCD_CLK_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_18_16, AUDIO_CLKC),
- PINMUX_IPSR_MSEL(IP10_18_16, SCK1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_18_16, HCTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_18_16, FRB_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_18_16, LCD_VEPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_21_19, AUDIO_CLKOUT),
- PINMUX_IPSR_MSEL(IP10_21_19, TX1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_21_19, HRTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_21_19, FSE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_21_19, LCD_M_DISP_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_22, CAN_CLK_A, SEL_RCAN_CLK_0),
- PINMUX_IPSR_MSEL(IP10_22, RX4_D, SEL_SCIF4_3),
-
- PINMUX_IPSR_MSEL(IP10_24_23, CAN0_TX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_24_23, TX4_D, SEL_SCIF4_3),
- PINMUX_IPSR_GPSR(IP10_24_23, MLB_CLK),
-
- PINMUX_IPSR_MSEL(IP10_25, CAN1_RX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_25, IRQ1_B, SEL_INTC_1),
-
- PINMUX_IPSR_MSEL(IP10_27_26, CAN0_RX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_27_26, IRQ0_B, SEL_INTC_1),
- PINMUX_IPSR_GPSR(IP10_27_26, MLB_SIG),
-
- PINMUX_IPSR_MSEL(IP10_29_28, CAN1_TX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_29_28, TX5_C, SEL_SCIF1_2),
- PINMUX_IPSR_GPSR(IP10_29_28, MLB_DAT),
-
- /* IPSR11 */
- PINMUX_IPSR_GPSR(IP11_0, SCL1),
- PINMUX_IPSR_MSEL(IP11_0, SCIF_CLK_C, SEL_SCIF_CLK_2),
-
- PINMUX_IPSR_GPSR(IP11_1, SDA1),
- PINMUX_IPSR_MSEL(IP11_0, RX1_E, SEL_SCIF1_4),
-
- PINMUX_IPSR_GPSR(IP11_2, SDA0),
- PINMUX_IPSR_MSEL(IP11_2, HIFEBL_A, SEL_HIF_0),
-
- PINMUX_IPSR_GPSR(IP11_3, SDSELF),
- PINMUX_IPSR_MSEL(IP11_3, RTS1_E, SEL_SCIF1_3),
-
- PINMUX_IPSR_MSEL(IP11_6_4, SCIF_CLK_A, SEL_SCIF_CLK_0),
- PINMUX_IPSR_MSEL(IP11_6_4, HSPI_CLK_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_6_4, VI0_CLK),
- PINMUX_IPSR_MSEL(IP11_6_4, RMII0_TXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_6_4, ET0_ERXD4),
-
- PINMUX_IPSR_MSEL(IP11_9_7, SCK0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_9_7, HSPI_CS_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_9_7, VI0_CLKENB),
- PINMUX_IPSR_MSEL(IP11_9_7, RMII0_TXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_9_7, ET0_ERXD5),
-
- PINMUX_IPSR_MSEL(IP11_11_10, RX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_11_10, HSPI_RX_A, SEL_HSPI_0),
- PINMUX_IPSR_MSEL(IP11_11_10, RMII0_RXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_11_10, ET0_ERXD6),
-
- PINMUX_IPSR_MSEL(IP11_12, TX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_12, HSPI_TX_A, SEL_HSPI_0),
-
- PINMUX_IPSR_GPSR(IP11_15_13, PENC1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_15_13, CAN1_TX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_15_13, IETX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_18_16, USB_OVC1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_18_16, CAN1_RX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_18_16, IERX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_20_19, DREQ0),
- PINMUX_IPSR_MSEL(IP11_20_19, SD1_CLK_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_20_19, ET0_TX_EN),
-
- PINMUX_IPSR_GPSR(IP11_22_21, DACK0),
- PINMUX_IPSR_MSEL(IP11_22_21, SD1_DAT3_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_22_21, ET0_TX_ER),
-
- PINMUX_IPSR_GPSR(IP11_25_23, DREQ1),
- PINMUX_IPSR_MSEL(IP11_25_23, HSPI_CLK_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_25_23, RX4_B, SEL_SCIF4_1),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_PHY_INT_C, SEL_ET0_CTL_0),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_TX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_27_26, DACK1),
- PINMUX_IPSR_MSEL(IP11_27_26, HSPI_CS_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_27_26, TX4_B, SEL_SCIF3_1),
- PINMUX_IPSR_MSEL(IP11_27_26, ET0_RX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_28, PRESETOUT),
- PINMUX_IPSR_GPSR(IP11_28, ST_CLKOUT),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- PINMUX_GPIO_GP_ALL(),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- GPIO_FN(CLKOUT), GPIO_FN(BS), GPIO_FN(CS0), GPIO_FN(EX_CS0),
- GPIO_FN(RD), GPIO_FN(WE0), GPIO_FN(WE1),
- GPIO_FN(SCL0), GPIO_FN(PENC0), GPIO_FN(USB_OVC0),
- GPIO_FN(IRQ2_B), GPIO_FN(IRQ3_B),
-
- /* IPSR0 */
- GPIO_FN(A0), GPIO_FN(ST0_CLKIN), GPIO_FN(LCD_DATA0_A),
- GPIO_FN(TCLKA_C),
- GPIO_FN(A1), GPIO_FN(ST0_REQ), GPIO_FN(LCD_DATA1_A),
- GPIO_FN(TCLKB_C),
- GPIO_FN(A2), GPIO_FN(ST0_SYC), GPIO_FN(LCD_DATA2_A),
- GPIO_FN(TCLKC_C),
- GPIO_FN(A3), GPIO_FN(ST0_VLD), GPIO_FN(LCD_DATA3_A),
- GPIO_FN(TCLKD_C),
- GPIO_FN(A4), GPIO_FN(ST0_D0), GPIO_FN(LCD_DATA4_A),
- GPIO_FN(TIOC0A_C),
- GPIO_FN(A5), GPIO_FN(ST0_D1), GPIO_FN(LCD_DATA5_A),
- GPIO_FN(TIOC0B_C),
- GPIO_FN(A6), GPIO_FN(ST0_D2), GPIO_FN(LCD_DATA6_A),
- GPIO_FN(TIOC0C_C),
- GPIO_FN(A7), GPIO_FN(ST0_D3), GPIO_FN(LCD_DATA7_A),
- GPIO_FN(TIOC0D_C),
- GPIO_FN(A8), GPIO_FN(ST0_D4), GPIO_FN(LCD_DATA8_A),
- GPIO_FN(TIOC1A_C),
- GPIO_FN(A9), GPIO_FN(ST0_D5), GPIO_FN(LCD_DATA9_A),
- GPIO_FN(TIOC1B_C),
- GPIO_FN(A10), GPIO_FN(ST0_D6), GPIO_FN(LCD_DATA10_A),
- GPIO_FN(TIOC2A_C),
- GPIO_FN(A11), GPIO_FN(ST0_D7), GPIO_FN(LCD_DATA11_A),
- GPIO_FN(TIOC2B_C),
- GPIO_FN(A12), GPIO_FN(LCD_DATA12_A), GPIO_FN(TIOC3A_C),
- GPIO_FN(A13), GPIO_FN(LCD_DATA13_A), GPIO_FN(TIOC3B_C),
- GPIO_FN(A14), GPIO_FN(LCD_DATA14_A), GPIO_FN(TIOC3C_C),
- GPIO_FN(A15), GPIO_FN(ST0_VCO_CLKIN), GPIO_FN(LCD_DATA15_A),
- GPIO_FN(TIOC3D_C),
-
- /* IPSR1 */
- GPIO_FN(A16), GPIO_FN(ST0_PWM), GPIO_FN(LCD_DON_A),
- GPIO_FN(TIOC4A_C),
- GPIO_FN(A17), GPIO_FN(ST1_VCO_CLKIN), GPIO_FN(LCD_CL1_A),
- GPIO_FN(TIOC4B_C),
- GPIO_FN(A18), GPIO_FN(ST1_PWM), GPIO_FN(LCD_CL2_A),
- GPIO_FN(TIOC4C_C),
- GPIO_FN(A19), GPIO_FN(ST1_CLKIN), GPIO_FN(LCD_CLK_A),
- GPIO_FN(TIOC4D_C),
- GPIO_FN(A20), GPIO_FN(ST1_REQ), GPIO_FN(LCD_FLM_A),
- GPIO_FN(A21), GPIO_FN(ST1_SYC), GPIO_FN(LCD_VCPWC_A),
- GPIO_FN(A22), GPIO_FN(ST1_VLD), GPIO_FN(LCD_VEPWC_A),
- GPIO_FN(A23), GPIO_FN(ST1_D0), GPIO_FN(LCD_M_DISP_A),
- GPIO_FN(A24), GPIO_FN(RX2_D), GPIO_FN(ST1_D1),
- GPIO_FN(A25), GPIO_FN(TX2_D), GPIO_FN(ST1_D2),
- GPIO_FN(D0), GPIO_FN(SD0_DAT0_A), GPIO_FN(MMC_D0_A),
- GPIO_FN(ST1_D3), GPIO_FN(FD0_A),
- GPIO_FN(D1), GPIO_FN(SD0_DAT1_A), GPIO_FN(MMC_D1_A),
- GPIO_FN(ST1_D4), GPIO_FN(FD1_A),
- GPIO_FN(D2), GPIO_FN(SD0_DAT2_A), GPIO_FN(MMC_D2_A),
- GPIO_FN(ST1_D5), GPIO_FN(FD2_A),
- GPIO_FN(D3), GPIO_FN(SD0_DAT3_A), GPIO_FN(MMC_D3_A),
- GPIO_FN(ST1_D6), GPIO_FN(FD3_A),
-
- /* IPSR2 */
- GPIO_FN(D4), GPIO_FN(SD0_CD_A), GPIO_FN(MMC_D4_A), GPIO_FN(ST1_D7),
- GPIO_FN(FD4_A),
- GPIO_FN(D5), GPIO_FN(SD0_WP_A), GPIO_FN(MMC_D5_A), GPIO_FN(FD5_A),
- GPIO_FN(D6), GPIO_FN(RSPI_RSPCK_A), GPIO_FN(MMC_D6_A),
- GPIO_FN(QSPCLK_A),
- GPIO_FN(FD6_A),
- GPIO_FN(D7), GPIO_FN(RSPI_SSL_A), GPIO_FN(MMC_D7_A), GPIO_FN(QSSL_A),
- GPIO_FN(FD7_A),
- GPIO_FN(D8), GPIO_FN(SD0_CLK_A), GPIO_FN(MMC_CLK_A), GPIO_FN(QIO2_A),
- GPIO_FN(FCE_A), GPIO_FN(ET0_GTX_CLK_B),
- GPIO_FN(D9), GPIO_FN(SD0_CMD_A), GPIO_FN(MMC_CMD_A), GPIO_FN(QIO3_A),
- GPIO_FN(FCLE_A), GPIO_FN(ET0_ETXD1_B),
- GPIO_FN(D10), GPIO_FN(RSPI_MOSI_A), GPIO_FN(QMO_QIO0_A),
- GPIO_FN(FALE_A), GPIO_FN(ET0_ETXD2_B),
- GPIO_FN(D11), GPIO_FN(RSPI_MISO_A), GPIO_FN(QMI_QIO1_A), GPIO_FN(FRE_A),
- GPIO_FN(ET0_ETXD3_B),
- GPIO_FN(D12), GPIO_FN(FWE_A), GPIO_FN(ET0_ETXD5_B),
- GPIO_FN(D13), GPIO_FN(RX2_B), GPIO_FN(FRB_A), GPIO_FN(ET0_ETXD6_B),
- GPIO_FN(D14), GPIO_FN(TX2_B), GPIO_FN(FSE_A), GPIO_FN(ET0_TX_CLK_B),
-
- /* IPSR3 */
- GPIO_FN(D15), GPIO_FN(SCK2_B),
- GPIO_FN(CS1_A26), GPIO_FN(QIO3_B),
- GPIO_FN(EX_CS1), GPIO_FN(RX3_B), GPIO_FN(ATACS0), GPIO_FN(QIO2_B),
- GPIO_FN(ET0_ETXD0),
- GPIO_FN(EX_CS2), GPIO_FN(TX3_B), GPIO_FN(ATACS1), GPIO_FN(QSPCLK_B),
- GPIO_FN(ET0_GTX_CLK_A),
- GPIO_FN(EX_CS3), GPIO_FN(SD1_CD_A), GPIO_FN(ATARD), GPIO_FN(QMO_QIO0_B),
- GPIO_FN(ET0_ETXD1_A),
- GPIO_FN(EX_CS4), GPIO_FN(SD1_WP_A), GPIO_FN(ATAWR), GPIO_FN(QMI_QIO1_B),
- GPIO_FN(ET0_ETXD2_A),
- GPIO_FN(EX_CS5), GPIO_FN(SD1_CMD_A), GPIO_FN(ATADIR), GPIO_FN(QSSL_B),
- GPIO_FN(ET0_ETXD3_A),
- GPIO_FN(RD_WR), GPIO_FN(TCLK0), GPIO_FN(CAN_CLK_B), GPIO_FN(ET0_ETXD4),
- GPIO_FN(EX_WAIT0), GPIO_FN(TCLK1_B),
- GPIO_FN(EX_WAIT1), GPIO_FN(SD1_DAT0_A), GPIO_FN(DREQ2),
- GPIO_FN(CAN1_TX_C), GPIO_FN(ET0_LINK_C), GPIO_FN(ET0_ETXD5_A),
- GPIO_FN(EX_WAIT2), GPIO_FN(SD1_DAT1_A), GPIO_FN(DACK2),
- GPIO_FN(CAN1_RX_C), GPIO_FN(ET0_MAGIC_C), GPIO_FN(ET0_ETXD6_A),
- GPIO_FN(DRACK0), GPIO_FN(SD1_DAT2_A), GPIO_FN(ATAG), GPIO_FN(TCLK1_A),
- GPIO_FN(ET0_ETXD7),
-
- /* IPSR4 */
- GPIO_FN(HCTS0_A), GPIO_FN(CTS1_A), GPIO_FN(VI0_FIELD),
- GPIO_FN(RMII0_RXD1_A), GPIO_FN(ET0_ERXD7),
- GPIO_FN(HRTS0_A), GPIO_FN(RTS1_A), GPIO_FN(VI0_HSYNC),
- GPIO_FN(RMII0_TXD_EN_A), GPIO_FN(ET0_RX_DV),
- GPIO_FN(HSCK0_A), GPIO_FN(SCK1_A), GPIO_FN(VI0_VSYNC),
- GPIO_FN(RMII0_RX_ER_A), GPIO_FN(ET0_RX_ER),
- GPIO_FN(HRX0_A), GPIO_FN(RX1_A), GPIO_FN(VI0_DATA0_VI0_B0),
- GPIO_FN(RMII0_CRS_DV_A), GPIO_FN(ET0_CRS),
- GPIO_FN(HTX0_A), GPIO_FN(TX1_A), GPIO_FN(VI0_DATA1_VI0_B1),
- GPIO_FN(RMII0_MDC_A), GPIO_FN(ET0_COL),
- GPIO_FN(CTS0_B), GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(RMII0_MDIO_A),
- GPIO_FN(ET0_MDC),
- GPIO_FN(RTS0_B), GPIO_FN(VI0_DATA3_VI0_B3), GPIO_FN(ET0_MDIO_A),
- GPIO_FN(SCK1_B), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(ET0_LINK_A),
- GPIO_FN(RX1_B), GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(ET0_MAGIC_A),
- GPIO_FN(TX1_B), GPIO_FN(VI0_DATA6_VI0_G0), GPIO_FN(ET0_PHY_INT_A),
- GPIO_FN(CTS1_B), GPIO_FN(VI0_DATA7_VI0_G1),
- GPIO_FN(RTS1_B), GPIO_FN(VI0_G2),
- GPIO_FN(SCK2_A), GPIO_FN(VI0_G3),
-
- /* IPSR5 */
- GPIO_FN(REF50CK), GPIO_FN(CTS1_E), GPIO_FN(HCTS0_D),
- GPIO_FN(REF125CK), GPIO_FN(ADTRG), GPIO_FN(RX5_C),
- GPIO_FN(SD2_WP_A), GPIO_FN(TX5_A), GPIO_FN(VI0_R5),
- GPIO_FN(SD2_CD_A), GPIO_FN(RX5_A), GPIO_FN(VI0_R4),
- GPIO_FN(ET0_PHY_INT_B),
- GPIO_FN(SD2_DAT3_A), GPIO_FN(TX4_A), GPIO_FN(VI0_R3),
- GPIO_FN(ET0_MAGIC_B),
- GPIO_FN(SD2_DAT2_A), GPIO_FN(RX4_A), GPIO_FN(VI0_R2),
- GPIO_FN(ET0_LINK_B),
- GPIO_FN(SD2_DAT1_A), GPIO_FN(TX3_A), GPIO_FN(VI0_R1),
- GPIO_FN(ET0_MDIO_B),
- GPIO_FN(SD2_DAT0_A), GPIO_FN(RX3_A), GPIO_FN(VI0_R0),
- GPIO_FN(ET0_ERXD3_B),
- GPIO_FN(SD2_CMD_A), GPIO_FN(TX2_A), GPIO_FN(VI0_G5),
- GPIO_FN(ET0_ERXD2_B),
- GPIO_FN(SD2_CLK_A), GPIO_FN(RX2_A), GPIO_FN(VI0_G4),
- GPIO_FN(ET0_RX_CLK_B),
-
- /* IPSR6 */
- GPIO_FN(DU0_DG1), GPIO_FN(CTS1_C), GPIO_FN(HRTS0_D),
- GPIO_FN(TIOC1B_A), GPIO_FN(HIFD09),
- GPIO_FN(DU0_DG0), GPIO_FN(TX1_C), GPIO_FN(HSCK0_D),
- GPIO_FN(IECLK_A), GPIO_FN(TIOC1A_A), GPIO_FN(HIFD08),
- GPIO_FN(DU0_DR7), GPIO_FN(RX1_C), GPIO_FN(TIOC0D_A),
- GPIO_FN(HIFD07),
- GPIO_FN(DU0_DR6), GPIO_FN(SCK1_C), GPIO_FN(TIOC0C_A),
- GPIO_FN(HIFD06),
- GPIO_FN(DU0_DR5), GPIO_FN(RTS0_C), GPIO_FN(TIOC0B_A),
- GPIO_FN(HIFD05),
- GPIO_FN(DU0_DR4), GPIO_FN(CTS0_C), GPIO_FN(TIOC0A_A),
- GPIO_FN(HIFD04),
- GPIO_FN(DU0_DR3), GPIO_FN(TX0_B), GPIO_FN(TCLKD_A), GPIO_FN(HIFD03),
- GPIO_FN(DU0_DR2), GPIO_FN(RX0_B), GPIO_FN(TCLKC_A), GPIO_FN(HIFD02),
- GPIO_FN(DU0_DR1), GPIO_FN(SCK0_B), GPIO_FN(HTX0_D),
- GPIO_FN(IERX_A), GPIO_FN(TCLKB_A), GPIO_FN(HIFD01),
- GPIO_FN(DU0_DR0), GPIO_FN(SCIF_CLK_B), GPIO_FN(HRX0_D),
- GPIO_FN(IETX_A), GPIO_FN(TCLKA_A), GPIO_FN(HIFD00),
-
- /* IPSR7 */
- GPIO_FN(DU0_DB4), GPIO_FN(HIFINT),
- GPIO_FN(DU0_DB3), GPIO_FN(TX5_B), GPIO_FN(TIOC4D_A), GPIO_FN(HIFRD),
- GPIO_FN(DU0_DB2), GPIO_FN(RX5_B), GPIO_FN(RMII0_TXD1_B),
- GPIO_FN(TIOC4C_A), GPIO_FN(HIFWR),
- GPIO_FN(DU0_DB1), GPIO_FN(TX4_C), GPIO_FN(RMII0_TXD0_B),
- GPIO_FN(TIOC4B_A), GPIO_FN(HIFRS),
- GPIO_FN(DU0_DB0), GPIO_FN(RX4_C), GPIO_FN(RMII0_TXD_EN_B),
- GPIO_FN(TIOC4A_A), GPIO_FN(HIFCS),
- GPIO_FN(DU0_DG7), GPIO_FN(TX3_C), GPIO_FN(RMII0_RXD1_B),
- GPIO_FN(TIOC3D_A), GPIO_FN(HIFD15),
- GPIO_FN(DU0_DG6), GPIO_FN(RX3_C), GPIO_FN(RMII0_RXD0_B),
- GPIO_FN(TIOC3C_A), GPIO_FN(HIFD14),
- GPIO_FN(DU0_DG5), GPIO_FN(TX2_C), GPIO_FN(RMII0_RX_ER_B),
- GPIO_FN(TIOC3B_A), GPIO_FN(HIFD13),
- GPIO_FN(DU0_DG4), GPIO_FN(RX2_C), GPIO_FN(RMII0_CRS_DV_B),
- GPIO_FN(TIOC3A_A), GPIO_FN(HIFD12),
- GPIO_FN(DU0_DG3), GPIO_FN(SCK2_C), GPIO_FN(RMII0_MDIO_B),
- GPIO_FN(TIOC2B_A), GPIO_FN(HIFD11),
- GPIO_FN(DU0_DG2), GPIO_FN(RTS1_C), GPIO_FN(RMII0_MDC_B),
- GPIO_FN(TIOC2A_A), GPIO_FN(HIFD10),
-
- /* IPSR8 */
- GPIO_FN(IRQ3_A), GPIO_FN(RTS0_A), GPIO_FN(HRTS0_B),
- GPIO_FN(ET0_ERXD3_A),
- GPIO_FN(IRQ2_A), GPIO_FN(CTS0_A), GPIO_FN(HCTS0_B),
- GPIO_FN(ET0_ERXD2_A),
- GPIO_FN(IRQ1_A), GPIO_FN(HSPI_RX_B), GPIO_FN(TX3_E),
- GPIO_FN(ET0_ERXD1),
- GPIO_FN(IRQ0_A), GPIO_FN(HSPI_TX_B), GPIO_FN(RX3_E),
- GPIO_FN(ET0_ERXD0),
- GPIO_FN(DU0_CDE), GPIO_FN(HTX0_B), GPIO_FN(AUDIO_CLKB_B),
- GPIO_FN(LCD_VCPWC_B),
- GPIO_FN(DU0_DISP), GPIO_FN(CAN0_TX_B), GPIO_FN(HRX0_B),
- GPIO_FN(AUDIO_CLKA_B),
- GPIO_FN(DU0_EXODDF_DU0_ODDF), GPIO_FN(CAN0_RX_B), GPIO_FN(HSCK0_B),
- GPIO_FN(SSI_SDATA1_B),
- GPIO_FN(DU0_EXVSYNC_DU0_VSYNC), GPIO_FN(HSPI_RX0_C),
- GPIO_FN(SSI_WS1_B),
- GPIO_FN(DU0_EXHSYNC_DU0_HSYNC), GPIO_FN(HSPI_TX0_C),
- GPIO_FN(SSI_SCK1_B),
- GPIO_FN(DU0_DOTCLKOUT), GPIO_FN(HSPI_CLK0_C),
- GPIO_FN(SSI_SDATA0_B),
- GPIO_FN(DU0_DOTCLKIN), GPIO_FN(HSPI_CS0_C),
- GPIO_FN(SSI_WS0_B),
- GPIO_FN(DU0_DB7), GPIO_FN(SSI_SCK0_B), GPIO_FN(HIFEBL_B),
- GPIO_FN(DU0_DB6), GPIO_FN(HIFRDY),
- GPIO_FN(DU0_DB5), GPIO_FN(HIFDREQ),
-
- /* IPSR9 */
- GPIO_FN(SSI_SDATA1_A), GPIO_FN(VI1_3_B), GPIO_FN(LCD_DATA14_B),
- GPIO_FN(SSI_WS1_A), GPIO_FN(VI1_2_B), GPIO_FN(LCD_DATA13_B),
- GPIO_FN(SSI_SCK1_A), GPIO_FN(VI1_1_B), GPIO_FN(TIOC2B_B),
- GPIO_FN(LCD_DATA12_B),
- GPIO_FN(SSI_SDATA0_A), GPIO_FN(VI1_0_B), GPIO_FN(TIOC2A_B),
- GPIO_FN(LCD_DATA11_B),
- GPIO_FN(SSI_WS0_A), GPIO_FN(TIOC1B_B), GPIO_FN(LCD_DATA10_B),
- GPIO_FN(SSI_SCK0_A), GPIO_FN(TIOC1A_B), GPIO_FN(LCD_DATA9_B),
- GPIO_FN(VI1_7_A), GPIO_FN(FCE_B), GPIO_FN(LCD_DATA8_B),
- GPIO_FN(VI1_6_A), GPIO_FN(FD7_B), GPIO_FN(LCD_DATA7_B),
- GPIO_FN(VI1_5_A), GPIO_FN(FD6_B), GPIO_FN(LCD_DATA6_B),
- GPIO_FN(VI1_4_A), GPIO_FN(FD5_B), GPIO_FN(LCD_DATA5_B),
- GPIO_FN(VI1_3_A), GPIO_FN(FD4_B), GPIO_FN(LCD_DATA4_B),
- GPIO_FN(VI1_2_A), GPIO_FN(FD3_B), GPIO_FN(LCD_DATA3_B),
- GPIO_FN(VI1_1_A), GPIO_FN(FD2_B), GPIO_FN(LCD_DATA2_B),
- GPIO_FN(VI1_0_A), GPIO_FN(FD1_B), GPIO_FN(LCD_DATA1_B),
- GPIO_FN(VI1_CLK_A), GPIO_FN(FD0_B), GPIO_FN(LCD_DATA0_B),
-
- /* IPSR10 */
- GPIO_FN(CAN1_TX_A), GPIO_FN(TX5_C), GPIO_FN(MLB_DAT),
- GPIO_FN(CAN0_RX_A), GPIO_FN(IRQ0_B), GPIO_FN(MLB_SIG),
- GPIO_FN(CAN1_RX_A), GPIO_FN(IRQ1_B),
- GPIO_FN(CAN0_TX_A), GPIO_FN(TX4_D), GPIO_FN(MLB_CLK),
- GPIO_FN(CAN_CLK_A), GPIO_FN(RX4_D),
- GPIO_FN(AUDIO_CLKOUT), GPIO_FN(TX1_E), GPIO_FN(HRTS0_C),
- GPIO_FN(FSE_B), GPIO_FN(LCD_M_DISP_B),
- GPIO_FN(AUDIO_CLKC), GPIO_FN(SCK1_E), GPIO_FN(HCTS0_C),
- GPIO_FN(FRB_B), GPIO_FN(LCD_VEPWC_B),
- GPIO_FN(AUDIO_CLKB_A), GPIO_FN(LCD_CLK_B),
- GPIO_FN(AUDIO_CLKA_A), GPIO_FN(VI1_CLK_B), GPIO_FN(SCK1_D),
- GPIO_FN(IECLK_B), GPIO_FN(LCD_FLM_B),
- GPIO_FN(SSI_SDATA3), GPIO_FN(VI1_7_B), GPIO_FN(HTX0_C),
- GPIO_FN(FWE_B), GPIO_FN(LCD_CL2_B),
- GPIO_FN(SSI_SDATA2), GPIO_FN(VI1_6_B), GPIO_FN(HRX0_C),
- GPIO_FN(FRE_B), GPIO_FN(LCD_CL1_B),
- GPIO_FN(SSI_WS23), GPIO_FN(VI1_5_B), GPIO_FN(TX1_D),
- GPIO_FN(HSCK0_C), GPIO_FN(FALE_B), GPIO_FN(LCD_DON_B),
- GPIO_FN(SSI_SCK23), GPIO_FN(VI1_4_B), GPIO_FN(RX1_D),
- GPIO_FN(FCLE_B), GPIO_FN(LCD_DATA15_B),
-
- /* IPSR11 */
- GPIO_FN(PRESETOUT), GPIO_FN(ST_CLKOUT),
- GPIO_FN(DACK1), GPIO_FN(HSPI_CS_B), GPIO_FN(TX4_B),
- GPIO_FN(ET0_RX_CLK_A),
- GPIO_FN(DREQ1), GPIO_FN(HSPI_CLK_B), GPIO_FN(RX4_B),
- GPIO_FN(ET0_PHY_INT_C), GPIO_FN(ET0_TX_CLK_A),
- GPIO_FN(DACK0), GPIO_FN(SD1_DAT3_A), GPIO_FN(ET0_TX_ER),
- GPIO_FN(DREQ0), GPIO_FN(SD1_CLK_A), GPIO_FN(ET0_TX_EN),
- GPIO_FN(USB_OVC1), GPIO_FN(RX3_D), GPIO_FN(CAN1_RX_B),
- GPIO_FN(RX5_D), GPIO_FN(IERX_B),
- GPIO_FN(PENC1), GPIO_FN(TX3_D), GPIO_FN(CAN1_TX_B),
- GPIO_FN(TX5_D), GPIO_FN(IETX_B),
- GPIO_FN(TX0_A), GPIO_FN(HSPI_TX_A),
- GPIO_FN(RX0_A), GPIO_FN(HSPI_RX_A), GPIO_FN(RMII0_RXD0_A),
- GPIO_FN(ET0_ERXD6),
- GPIO_FN(SCK0_A), GPIO_FN(HSPI_CS_A), GPIO_FN(VI0_CLKENB),
- GPIO_FN(RMII0_TXD1_A), GPIO_FN(ET0_ERXD5),
- GPIO_FN(SCIF_CLK_A), GPIO_FN(HSPI_CLK_A), GPIO_FN(VI0_CLK),
- GPIO_FN(RMII0_TXD0_A), GPIO_FN(ET0_ERXD4),
- GPIO_FN(SDSELF), GPIO_FN(RTS1_E),
- GPIO_FN(SDA0), GPIO_FN(HIFEBL_A),
- GPIO_FN(SDA1), GPIO_FN(RX1_E),
- GPIO_FN(SCL1), GPIO_FN(SCIF_CLK_C),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("GPSR0", 0xFFFC0004, 32, 1, GROUP(
- GP_0_31_FN, FN_IP2_2_0,
- GP_0_30_FN, FN_IP1_31_29,
- GP_0_29_FN, FN_IP1_28_26,
- GP_0_28_FN, FN_IP1_25_23,
- GP_0_27_FN, FN_IP1_22_20,
- GP_0_26_FN, FN_IP1_19_18,
- GP_0_25_FN, FN_IP1_17_16,
- GP_0_24_FN, FN_IP0_5_4,
- GP_0_23_FN, FN_IP0_3_2,
- GP_0_22_FN, FN_IP0_1_0,
- GP_0_21_FN, FN_IP11_28,
- GP_0_20_FN, FN_IP1_7_6,
- GP_0_19_FN, FN_IP1_5_4,
- GP_0_18_FN, FN_IP1_3_2,
- GP_0_17_FN, FN_IP1_1_0,
- GP_0_16_FN, FN_IP0_31_30,
- GP_0_15_FN, FN_IP0_29_28,
- GP_0_14_FN, FN_IP0_27_26,
- GP_0_13_FN, FN_IP0_25_24,
- GP_0_12_FN, FN_IP0_23_22,
- GP_0_11_FN, FN_IP0_21_20,
- GP_0_10_FN, FN_IP0_19_18,
- GP_0_9_FN, FN_IP0_17_16,
- GP_0_8_FN, FN_IP0_15_14,
- GP_0_7_FN, FN_IP0_13_12,
- GP_0_6_FN, FN_IP0_11_10,
- GP_0_5_FN, FN_IP0_9_8,
- GP_0_4_FN, FN_IP0_7_6,
- GP_0_3_FN, FN_IP1_15_14,
- GP_0_2_FN, FN_IP1_13_12,
- GP_0_1_FN, FN_IP1_11_10,
- GP_0_0_FN, FN_IP1_9_8 ))
- },
- { PINMUX_CFG_REG("GPSR1", 0xFFFC0008, 32, 1, GROUP(
- GP_1_31_FN, FN_IP11_25_23,
- GP_1_30_FN, FN_IP2_13_11,
- GP_1_29_FN, FN_IP2_10_8,
- GP_1_28_FN, FN_IP2_7_5,
- GP_1_27_FN, FN_IP3_26_24,
- GP_1_26_FN, FN_IP3_23_21,
- GP_1_25_FN, FN_IP2_4_3,
- GP_1_24_FN, FN_WE1,
- GP_1_23_FN, FN_WE0,
- GP_1_22_FN, FN_IP3_19_18,
- GP_1_21_FN, FN_RD,
- GP_1_20_FN, FN_IP3_17_15,
- GP_1_19_FN, FN_IP3_14_12,
- GP_1_18_FN, FN_IP3_11_9,
- GP_1_17_FN, FN_IP3_8_6,
- GP_1_16_FN, FN_IP3_5_3,
- GP_1_15_FN, FN_EX_CS0,
- GP_1_14_FN, FN_IP3_2,
- GP_1_13_FN, FN_CS0,
- GP_1_12_FN, FN_BS,
- GP_1_11_FN, FN_CLKOUT,
- GP_1_10_FN, FN_IP3_1_0,
- GP_1_9_FN, FN_IP2_30_28,
- GP_1_8_FN, FN_IP2_27_25,
- GP_1_7_FN, FN_IP2_24_23,
- GP_1_6_FN, FN_IP2_22_20,
- GP_1_5_FN, FN_IP2_19_17,
- GP_1_4_FN, FN_IP2_16_14,
- GP_1_3_FN, FN_IP11_22_21,
- GP_1_2_FN, FN_IP11_20_19,
- GP_1_1_FN, FN_IP3_29_27,
- GP_1_0_FN, FN_IP3_20 ))
- },
- { PINMUX_CFG_REG("GPSR2", 0xFFFC000C, 32, 1, GROUP(
- GP_2_31_FN, FN_IP4_31_30,
- GP_2_30_FN, FN_IP5_2_0,
- GP_2_29_FN, FN_IP5_5_3,
- GP_2_28_FN, FN_IP5_8_6,
- GP_2_27_FN, FN_IP5_11_9,
- GP_2_26_FN, FN_IP5_14_12,
- GP_2_25_FN, FN_IP5_17_15,
- GP_2_24_FN, FN_IP5_20_18,
- GP_2_23_FN, FN_IP5_22_21,
- GP_2_22_FN, FN_IP5_24_23,
- GP_2_21_FN, FN_IP5_26_25,
- GP_2_20_FN, FN_IP4_29_28,
- GP_2_19_FN, FN_IP4_27_26,
- GP_2_18_FN, FN_IP4_25_24,
- GP_2_17_FN, FN_IP4_23_22,
- GP_2_16_FN, FN_IP4_21_20,
- GP_2_15_FN, FN_IP4_19_18,
- GP_2_14_FN, FN_IP4_17_15,
- GP_2_13_FN, FN_IP4_14_12,
- GP_2_12_FN, FN_IP4_11_9,
- GP_2_11_FN, FN_IP4_8_6,
- GP_2_10_FN, FN_IP4_5_3,
- GP_2_9_FN, FN_IP8_27_26,
- GP_2_8_FN, FN_IP11_12,
- GP_2_7_FN, FN_IP8_25_23,
- GP_2_6_FN, FN_IP8_22_20,
- GP_2_5_FN, FN_IP11_27_26,
- GP_2_4_FN, FN_IP8_29_28,
- GP_2_3_FN, FN_IP4_2_0,
- GP_2_2_FN, FN_IP11_11_10,
- GP_2_1_FN, FN_IP11_9_7,
- GP_2_0_FN, FN_IP11_6_4 ))
- },
- { PINMUX_CFG_REG("GPSR3", 0xFFFC0010, 32, 1, GROUP(
- GP_3_31_FN, FN_IP9_1_0,
- GP_3_30_FN, FN_IP8_19_18,
- GP_3_29_FN, FN_IP8_17_16,
- GP_3_28_FN, FN_IP8_15_14,
- GP_3_27_FN, FN_IP8_13_12,
- GP_3_26_FN, FN_IP8_11_10,
- GP_3_25_FN, FN_IP8_9_8,
- GP_3_24_FN, FN_IP8_7_6,
- GP_3_23_FN, FN_IP8_5_4,
- GP_3_22_FN, FN_IP8_3_2,
- GP_3_21_FN, FN_IP8_1_0,
- GP_3_20_FN, FN_IP7_30_29,
- GP_3_19_FN, FN_IP7_28_27,
- GP_3_18_FN, FN_IP7_26_24,
- GP_3_17_FN, FN_IP7_23_21,
- GP_3_16_FN, FN_IP7_20_18,
- GP_3_15_FN, FN_IP7_17_15,
- GP_3_14_FN, FN_IP7_14_12,
- GP_3_13_FN, FN_IP7_11_9,
- GP_3_12_FN, FN_IP7_8_6,
- GP_3_11_FN, FN_IP7_5_3,
- GP_3_10_FN, FN_IP7_2_0,
- GP_3_9_FN, FN_IP6_23_21,
- GP_3_8_FN, FN_IP6_20_18,
- GP_3_7_FN, FN_IP6_17_16,
- GP_3_6_FN, FN_IP6_15_14,
- GP_3_5_FN, FN_IP6_13_12,
- GP_3_4_FN, FN_IP6_11_10,
- GP_3_3_FN, FN_IP6_9_8,
- GP_3_2_FN, FN_IP6_7_6,
- GP_3_1_FN, FN_IP6_5_3,
- GP_3_0_FN, FN_IP6_2_0 ))
- },
-
- { PINMUX_CFG_REG("GPSR4", 0xFFFC0014, 32, 1, GROUP(
- GP_4_31_FN, FN_IP10_24_23,
- GP_4_30_FN, FN_IP10_22,
- GP_4_29_FN, FN_IP11_18_16,
- GP_4_28_FN, FN_USB_OVC0,
- GP_4_27_FN, FN_IP11_15_13,
- GP_4_26_FN, FN_PENC0,
- GP_4_25_FN, FN_IP11_2,
- GP_4_24_FN, FN_SCL0,
- GP_4_23_FN, FN_IP11_1,
- GP_4_22_FN, FN_IP11_0,
- GP_4_21_FN, FN_IP10_21_19,
- GP_4_20_FN, FN_IP10_18_16,
- GP_4_19_FN, FN_IP10_15,
- GP_4_18_FN, FN_IP10_14_12,
- GP_4_17_FN, FN_IP10_11_9,
- GP_4_16_FN, FN_IP10_8_6,
- GP_4_15_FN, FN_IP10_5_3,
- GP_4_14_FN, FN_IP10_2_0,
- GP_4_13_FN, FN_IP9_29_28,
- GP_4_12_FN, FN_IP9_27_26,
- GP_4_11_FN, FN_IP9_9_8,
- GP_4_10_FN, FN_IP9_7_6,
- GP_4_9_FN, FN_IP9_5_4,
- GP_4_8_FN, FN_IP9_3_2,
- GP_4_7_FN, FN_IP9_17_16,
- GP_4_6_FN, FN_IP9_15_14,
- GP_4_5_FN, FN_IP9_13_12,
- GP_4_4_FN, FN_IP9_11_10,
- GP_4_3_FN, FN_IP9_25_24,
- GP_4_2_FN, FN_IP9_23_22,
- GP_4_1_FN, FN_IP9_21_20,
- GP_4_0_FN, FN_IP9_19_18 ))
- },
- { PINMUX_CFG_REG_VAR("GPSR5", 0xFFFC0018, 32,
- GROUP(-20, 1, 1, -6, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_FN, FN_IP10_29_28,
- GP_5_10_FN, FN_IP10_27_26,
- /* GP5_9_4 RESERVED */
- GP_5_3_FN, FN_IRQ3_B,
- GP_5_2_FN, FN_IRQ2_B,
- GP_5_1_FN, FN_IP11_3,
- GP_5_0_FN, FN_IP10_25 ))
- },
-
- { PINMUX_CFG_REG_VAR("IPSR0", 0xFFFC001C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP0_31_30 [2] */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A,
- FN_TIOC3D_C,
- /* IP0_29_28 [2] */
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C, 0,
- /* IP0_27_26 [2] */
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C, 0,
- /* IP0_25_24 [2] */
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C, 0,
- /* IP0_23_22 [2] */
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- /* IP0_21_20 [2] */
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- /* IP0_19_18 [2] */
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- /* IP0_17_16 [2] */
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- /* IP0_15_14 [2] */
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- /* IP0_13_12 [2] */
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- /* IP0_11_10 [2] */
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- /* IP0_9_8 [2] */
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- /* IP0_7_6 [2] */
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- /* IP0_5_4 [2] */
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- /* IP0_3_2 [2] */
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- /* IP0_1_0 [2] */
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR1", 0xFFFC0020, 32,
- GROUP(3, 3, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP1_31_29 [3] */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6,
- FN_FD3_A, 0, 0, 0,
- /* IP1_28_26 [3] */
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5,
- FN_FD2_A, 0, 0, 0,
- /* IP1_25_23 [3] */
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4,
- FN_FD1_A, 0, 0, 0,
- /* IP1_22_20 [3] */
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3,
- FN_FD0_A, 0, 0, 0,
- /* IP1_19_18 [2] */
- FN_A25, FN_TX2_D, FN_ST1_D2, 0,
- /* IP1_17_16 [2] */
- FN_A24, FN_RX2_D, FN_ST1_D1, 0,
- /* IP1_15_14 [2] */
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A, 0,
- /* IP1_13_12 [2] */
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A, 0,
- /* IP1_11_10 [2] */
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A, 0,
- /* IP1_9_8 [2] */
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A, 0,
- /* IP1_7_6 [2] */
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- /* IP1_5_4 [2] */
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- /* IP1_3_2 [2] */
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- /* IP1_1_0 [2] */
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR2", 0xFFFC0024, 32,
- GROUP(-1, 3, 3, 2, 3, 3, 3, 3, 3, 3, 2, 3),
- GROUP(
- /* IP2_31 [1] RESERVED */
- /* IP2_30_28 [3] */
- FN_D14, FN_TX2_B, 0, FN_FSE_A,
- FN_ET0_TX_CLK_B, 0, 0, 0,
- /* IP2_27_25 [3] */
- FN_D13, FN_RX2_B, 0, FN_FRB_A,
- FN_ET0_ETXD6_B, 0, 0, 0,
- /* IP2_24_23 [2] */
- FN_D12, 0, FN_FWE_A, FN_ET0_ETXD5_B,
- /* IP2_22_20 [3] */
- FN_D11, FN_RSPI_MISO_A, 0, FN_QMI_QIO1_A,
- FN_FRE_A, FN_ET0_ETXD3_B, 0, 0,
- /* IP2_19_17 [3] */
- FN_D10, FN_RSPI_MOSI_A, 0, FN_QMO_QIO0_A,
- FN_FALE_A, FN_ET0_ETXD2_B, 0, 0,
- /* IP2_16_14 [3] */
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A,
- FN_FCLE_A, FN_ET0_ETXD1_B, 0, 0,
- /* IP2_13_11 [3] */
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A,
- FN_FCE_A, FN_ET0_GTX_CLK_B, 0, 0,
- /* IP2_10_8 [3] */
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A,
- FN_FD7_A, 0, 0, 0,
- /* IP2_7_5 [3] */
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A,
- FN_FD6_A, 0, 0, 0,
- /* IP2_4_3 [2] */
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- /* IP2_2_0 [3] */
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7,
- FN_FD4_A, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR3", 0xFFFC0028, 32,
- GROUP(-2, 3, 3, 3, 1, 2, 3, 3, 3, 3, 3, 1, 2),
- GROUP(
- /* IP3_31_30 [2] RESERVED */
- /* IP3_29_27 [3] */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A,
- FN_ET0_ETXD7, 0, 0, 0,
- /* IP3_26_24 [3] */
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A, 0, 0,
- /* IP3_23_21 [3] */
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A, 0, 0,
- /* IP3_20 [1] */
- FN_EX_WAIT0, FN_TCLK1_B,
- /* IP3_19_18 [2] */
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- /* IP3_17_15 [3] */
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B,
- FN_ET0_ETXD3_A, 0, 0, 0,
- /* IP3_14_12 [3] */
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B,
- FN_ET0_ETXD2_A, 0, 0, 0,
- /* IP3_11_9 [3] */
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B,
- FN_ET0_ETXD1_A, 0, 0, 0,
- /* IP3_8_6 [3] */
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B,
- FN_ET0_GTX_CLK_A, 0, 0, 0,
- /* IP3_5_3 [3] */
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B,
- FN_ET0_ETXD0, 0, 0, 0,
- /* IP3_2 [1] */
- FN_CS1_A26, FN_QIO3_B,
- /* IP3_1_0 [2] */
- FN_D15, FN_SCK2_B, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR4", 0xFFFC002C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP4_31_30 [2] */
- 0, FN_SCK2_A, FN_VI0_G3, 0,
- /* IP4_29_28 [2] */
- 0, FN_RTS1_B, FN_VI0_G2, 0,
- /* IP4_27_26 [2] */
- 0, FN_CTS1_B, FN_VI0_DATA7_VI0_G1, 0,
- /* IP4_25_24 [2] */
- 0, FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- /* IP4_23_22 [2] */
- 0, FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- /* IP4_21_20 [2] */
- 0, FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- /* IP4_19_18 [2] */
- 0, FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- /* IP4_17_15 [3] */
- 0, FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A,
- FN_ET0_MDC, 0, 0, 0,
- /* IP4_14_12 [3] */
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A,
- FN_ET0_COL, 0, 0, 0,
- /* IP4_11_9 [3] */
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A,
- FN_ET0_CRS, 0, 0, 0,
- /* IP4_8_6 [3] */
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A,
- FN_ET0_RX_ER, 0, 0, 0,
- /* IP4_5_3 [3] */
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A,
- FN_ET0_RX_DV, 0, 0, 0,
- /* IP4_2_0 [3] */
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A,
- FN_ET0_ERXD7, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR5", 0xFFFC0030, 32,
- GROUP(-5, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP5_31_27 [5] RESERVED */
- /* IP5_26_25 [2] */
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D, 0,
- /* IP5_24_23 [2] */
- FN_REF125CK, FN_ADTRG, FN_RX5_C, 0,
- /* IP5_22_21 [2] */
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5, 0,
- /* IP5_20_18 [3] */
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, 0,
- 0, 0, 0, FN_ET0_PHY_INT_B,
- /* IP5_17_15 [3] */
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, 0,
- 0, 0, 0, FN_ET0_MAGIC_B,
- /* IP5_14_12 [3] */
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, 0,
- 0, 0, 0, FN_ET0_LINK_B,
- /* IP5_11_9 [3] */
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, 0,
- 0, 0, 0, FN_ET0_MDIO_B,
- /* IP5_8_6 [3] */
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, 0,
- 0, 0, 0, FN_ET0_ERXD3_B,
- /* IP5_5_3 [3] */
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, 0,
- 0, 0, 0, FN_ET0_ERXD2_B,
- /* IP5_2_0 [3] */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, 0,
- FN_ET0_RX_CLK_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR6", 0xFFFC0034, 32,
- GROUP(-8, 3, 3, 2, 2, 2, 2, 2, 2, 3, 3),
- GROUP(
- /* IP5_31_24 [8] RESERVED */
- /* IP6_23_21 [3] */
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A,
- FN_HIFD09, 0, 0, 0,
- /* IP6_20_18 [3] */
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A,
- FN_TIOC1A_A, FN_HIFD08, 0, 0,
- /* IP6_17_16 [2] */
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- /* IP6_15_14 [2] */
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- /* IP6_13_12 [2] */
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- /* IP6_11_10 [2] */
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- /* IP6_9_8 [2] */
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- /* IP6_7_6 [2] */
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- /* IP6_5_3 [3] */
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A,
- FN_TCLKB_A, FN_HIFD01, 0, 0,
- /* IP6_2_0 [3] */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A,
- FN_TCLKA_A, FN_HIFD00, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR7", 0xFFFC0038, 32,
- GROUP(-1, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP7_31 [1] RESERVED */
- /* IP7_30_29 [2] */
- FN_DU0_DB4, 0, FN_HIFINT, 0,
- /* IP7_28_27 [2] */
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- /* IP7_26_24 [3] */
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A,
- FN_HIFWR, 0, 0, 0,
- /* IP7_23_21 [3] */
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A,
- FN_HIFRS, 0, 0, 0,
- /* IP7_20_18 [3] */
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A,
- FN_HIFCS, 0, 0, 0,
- /* IP7_17_15 [3] */
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A,
- FN_HIFD15, 0, 0, 0,
- /* IP7_14_12 [3] */
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A,
- FN_HIFD14, 0, 0, 0,
- /* IP7_11_9 [3] */
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A,
- FN_HIFD13, 0, 0, 0,
- /* IP7_8_6 [3] */
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A,
- FN_HIFD12, 0, 0, 0,
- /* IP7_5_3 [3] */
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A,
- FN_HIFD11, 0, 0, 0,
- /* IP7_2_0 [3] */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A,
- FN_HIFD10, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR8", 0xFFFC003C, 32,
- GROUP(-2, 2, 2, 3, 3, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP8_29_28 [2] */
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
- /* IP8_27_26 [2] */
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- /* IP8_25_23 [3] */
- FN_IRQ1_A, 0, FN_HSPI_RX_B, FN_TX3_E,
- FN_ET0_ERXD1, 0, 0, 0,
- /* IP8_22_20 [3] */
- FN_IRQ0_A, 0, FN_HSPI_TX_B, FN_RX3_E,
- FN_ET0_ERXD0, 0, 0, 0,
- /* IP8_19_18 [2] */
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- /* IP8_17_16 [2] */
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- /* IP8_15_14 [2] */
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B,
- FN_SSI_SDATA1_B,
- /* IP8_13_12 [2] */
- FN_DU0_EXVSYNC_DU0_VSYNC, 0, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- /* IP8_11_10 [2] */
- FN_DU0_EXHSYNC_DU0_HSYNC, 0, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- /* IP8_9_8 [2] */
- FN_DU0_DOTCLKOUT, 0, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- /* IP8_7_6 [2] */
- FN_DU0_DOTCLKIN, 0, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- /* IP8_5_4 [2] */
- FN_DU0_DB7, 0, FN_SSI_SCK0_B, FN_HIFEBL_B,
- /* IP8_3_2 [2] */
- FN_DU0_DB6, 0, FN_HIFRDY, 0,
- /* IP8_1_0 [2] */
- FN_DU0_DB5, 0, FN_HIFDREQ, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR9", 0xFFFC0040, 32,
- GROUP(-2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP9_29_28 [2] */
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B, 0,
- /* IP9_27_26 [2] */
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B, 0,
- /* IP9_25_24 [2] */
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- /* IP9_23_22 [2] */
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- /* IP9_21_20 [2] */
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B, 0,
- /* IP9_19_18 [2] */
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B, 0,
- /* IP9_17_16 [2] */
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B, 0,
- /* IP9_15_14 [2] */
- FN_VI1_6_A, 0, FN_FD7_B, FN_LCD_DATA7_B,
- /* IP9_13_12 [2] */
- FN_VI1_5_A, 0, FN_FD6_B, FN_LCD_DATA6_B,
- /* IP9_11_10 [2] */
- FN_VI1_4_A, 0, FN_FD5_B, FN_LCD_DATA5_B,
- /* IP9_9_8 [2] */
- FN_VI1_3_A, 0, FN_FD4_B, FN_LCD_DATA4_B,
- /* IP9_7_6 [2] */
- FN_VI1_2_A, 0, FN_FD3_B, FN_LCD_DATA3_B,
- /* IP9_5_4 [2] */
- FN_VI1_1_A, 0, FN_FD2_B, FN_LCD_DATA2_B,
- /* IP9_3_2 [2] */
- FN_VI1_0_A, 0, FN_FD1_B, FN_LCD_DATA1_B,
- /* IP9_1_0 [2] */
- FN_VI1_CLK_A, 0, FN_FD0_B, FN_LCD_DATA0_B ))
- },
- { PINMUX_CFG_REG_VAR("IPSR10", 0xFFFC0044, 32,
- GROUP(-2, 2, 2, 1, 2, 1, 3, 3, 1, 3, 3, 3, 3, 3),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP10_29_28 [2] */
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT, 0,
- /* IP10_27_26 [2] */
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG, 0,
- /* IP10_25 [1] */
- FN_CAN1_RX_A, FN_IRQ1_B,
- /* IP10_24_23 [2] */
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK, 0,
- /* IP10_22 [1] */
- FN_CAN_CLK_A, FN_RX4_D,
- /* IP10_21_19 [3] */
- FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,
- FN_LCD_M_DISP_B, 0, 0,
- /* IP10_18_16 [3] */
- FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
- FN_LCD_VEPWC_B, 0, 0,
- /* IP10_15 [1] */
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- /* IP10_14_12 [3] */
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
- FN_LCD_FLM_B, 0, 0, 0,
- /* IP10_11_9 [3] */
- FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
- FN_LCD_CL2_B, 0, 0,
- /* IP10_8_6 [3] */
- FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
- FN_LCD_CL1_B, 0, 0,
- /* IP10_5_3 [3] */
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
- FN_LCD_DON_B, 0, 0,
- /* IP10_2_0 [3] */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B,
- FN_LCD_DATA15_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR11", 0xFFFC0048, 32,
- GROUP(-3, 1, 2, 3, 2, 2, 3, 3, 1, 2, 3, 3,
- 1, 1, 1, 1),
- GROUP(
- /* IP11_31_29 [3] RESERVED */
- /* IP11_28 [1] */
- FN_PRESETOUT, FN_ST_CLKOUT,
- /* IP11_27_26 [2] */
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- /* IP11_25_23 [3] */
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C,
- FN_ET0_TX_CLK_A, 0, 0, 0,
- /* IP11_22_21 [2] */
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER, 0,
- /* IP11_20_19 [2] */
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN, 0,
- /* IP11_18_16 [3] */
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D,
- FN_IERX_B, 0, 0, 0,
- /* IP11_15_13 [3] */
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D,
- FN_IETX_B, 0, 0, 0,
- /* IP11_12 [1] */
- FN_TX0_A, FN_HSPI_TX_A,
- /* IP11_11_10 [2] */
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- /* IP11_9_7 [3] */
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A,
- FN_ET0_ERXD5, 0, 0, 0,
- /* IP11_6_4 [3] */
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A,
- FN_ET0_ERXD4, 0, 0, 0,
- /* IP11_3 [1] */
- FN_SDSELF, FN_RTS1_E,
- /* IP11_2 [1] */
- FN_SDA0, FN_HIFEBL_A,
- /* IP11_1 [1] */
- FN_SDA1, FN_RX1_E,
- /* IP11_0 [1] */
- FN_SCL1, FN_SCIF_CLK_C ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL1", 0xFFFC004C, 32,
- GROUP(-3, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 2,
- 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* SEL1_31_29 [3] RESERVED */
- /* SEL1_28 [1] */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- /* SEL1_27 [1] */
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- /* SEL1_26 [1] */
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- /* SEL1_25 [1] */
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- /* SEL1_24 [1] */
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- /* SEL1_23 [1] */
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- /* SEL1_22_21 [2] */
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2, 0,
- /* SEL1_20 [1] */
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- /* SEL1_19 [1] */
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- /* SEL1_18 [1] */
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- /* SEL1_17_16 [2] */
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2, 0,
- /* SEL1_15_14 [2] */
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- /* SEL1_13 [1] */
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- /* SEL1_12_11 [2] */
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2, 0,
- /* SEL1_10 [1] */
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- /* SEL1_9 [1] */
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- /* SEL1_8 [1] */
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- /* SEL1_7 [1] */
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- /* SEL1_6 [1] */
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- /* SEL1_5 [1] */
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- /* SEL1_4 [1] */
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- /* SEL1_3 [1] */
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- /* SEL1_2 [1] */
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- /* SEL1_1 [1] */
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- /* SEL1_0 [1] */
- FN_SEL_INTC_0, FN_SEL_INTC_1 ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xFFFC0050, 32,
- GROUP(-8, 1, 1, 1, 2, 2, 1, 2, 2, 3, 2, 3, 2, 2),
- GROUP(
- /* SEL2_31_24 [8] RESERVED */
- /* SEL2_23 [1] */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- /* SEL2_22 [1] */
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- /* SEL2_21 [1] */
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- /* SEL2_20_19 [2] */
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2, 0,
- /* SEL2_18_17 [2] */
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2, 0,
- /* SEL2_16 [1] */
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- /* SEL2_15_14 [2] */
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- /* SEL2_13_12 [2] */
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- /* SEL2_11_9 [3] */
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
- FN_SEL_SCIF3_4, 0, 0, 0,
- /* SEL2_8_7 [2] */
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
- /* SEL2_6_4 [3] */
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
- FN_SEL_SCIF1_4, 0, 0, 0,
- /* SEL2_3_2 [2] */
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, 0,
- /* SEL2_1_0 [2] */
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2, 0 ))
- },
- /* GPIO 0 - 5*/
- { PINMUX_CFG_REG("INOUTSEL0", 0xFFC40004, 32, 1, GROUP(GP_INOUTSEL(0)))
- },
- { PINMUX_CFG_REG("INOUTSEL1", 0xFFC41004, 32, 1, GROUP(GP_INOUTSEL(1)))
- },
- { PINMUX_CFG_REG("INOUTSEL2", 0xFFC42004, 32, 1, GROUP(GP_INOUTSEL(2)))
- },
- { PINMUX_CFG_REG("INOUTSEL3", 0xFFC43004, 32, 1, GROUP(GP_INOUTSEL(3)))
- },
- { PINMUX_CFG_REG("INOUTSEL4", 0xFFC44004, 32, 1, GROUP(GP_INOUTSEL(4)))
- },
- { PINMUX_CFG_REG_VAR("INOUTSEL5", 0xffc45004, 32,
- GROUP(-20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_IN, GP_5_11_OUT,
- GP_5_10_IN, GP_5_10_OUT,
- GP_5_9_IN, GP_5_9_OUT,
- GP_5_8_IN, GP_5_8_OUT,
- GP_5_7_IN, GP_5_7_OUT,
- GP_5_6_IN, GP_5_6_OUT,
- GP_5_5_IN, GP_5_5_OUT,
- GP_5_4_IN, GP_5_4_OUT,
- GP_5_3_IN, GP_5_3_OUT,
- GP_5_2_IN, GP_5_2_OUT,
- GP_5_1_IN, GP_5_1_OUT,
- GP_5_0_IN, GP_5_0_OUT ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- /* GPIO 0 - 5*/
- { PINMUX_DATA_REG("INDT0", 0xFFC4000C, 32, GROUP(GP_INDT(0))) },
- { PINMUX_DATA_REG("INDT1", 0xFFC4100C, 32, GROUP(GP_INDT(1))) },
- { PINMUX_DATA_REG("INDT2", 0xFFC4200C, 32, GROUP(GP_INDT(2))) },
- { PINMUX_DATA_REG("INDT3", 0xFFC4300C, 32, GROUP(GP_INDT(3))) },
- { PINMUX_DATA_REG("INDT4", 0xFFC4400C, 32, GROUP(GP_INDT(4))) },
- { PINMUX_DATA_REG("INDT5", 0xFFC4500C, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0,
- GP_5_11_DATA, GP_5_10_DATA, GP_5_9_DATA, GP_5_8_DATA,
- GP_5_7_DATA, GP_5_6_DATA, GP_5_5_DATA, GP_5_4_DATA,
- GP_5_3_DATA, GP_5_2_DATA, GP_5_1_DATA, GP_5_0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7734_pinmux_info = {
- .name = "sh7734_pfc",
-
- .unlock_reg = 0xFFFC0000,
-
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7757.c b/drivers/pinctrl/renesas/pfc-sh7757.c
deleted file mode 100644
index 0d7857d7efefb4..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7757.c
+++ /dev/null
@@ -1,2219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7757.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA,
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG7_IN, PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTI7_IN, PTI6_IN, PTI5_IN, PTI4_IN,
- PTI3_IN, PTI2_IN, PTI1_IN, PTI0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTO7_IN, PTO6_IN, PTO5_IN, PTO4_IN,
- PTO3_IN, PTO2_IN, PTO1_IN, PTO0_IN,
- PTP7_IN, PTP6_IN, PTP5_IN, PTP4_IN,
- PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG7_OUT, PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTI7_OUT, PTI6_OUT, PTI5_OUT, PTI4_OUT,
- PTI3_OUT, PTI2_OUT, PTI1_OUT, PTI0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTO7_OUT, PTO6_OUT, PTO5_OUT, PTO4_OUT,
- PTO3_OUT, PTO2_OUT, PTO1_OUT, PTO0_OUT,
- PTP7_OUT, PTP6_OUT, PTP5_OUT, PTP4_OUT,
- PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG7_FN, PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTI7_FN, PTI6_FN, PTI5_FN, PTI4_FN,
- PTI3_FN, PTI2_FN, PTI1_FN, PTI0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTO7_FN, PTO6_FN, PTO5_FN, PTO4_FN,
- PTO3_FN, PTO2_FN, PTO1_FN, PTO0_FN,
- PTP7_FN, PTP6_FN, PTP5_FN, PTP4_FN,
- PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
-
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- PS1_2_FN1, PS1_2_FN2,
-
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- PS2_2_FN1, PS2_2_FN2,
-
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
-
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2,
-
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
-
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2,
-
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- PS7_4_FN1, PS7_4_FN2,
-
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* PTA (mobule: LBSC, RGMII) */
- BS_MARK, RDWR_MARK, WE1_MARK, RDY_MARK,
- ET0_MDC_MARK, ET0_MDIO_MARK, ET1_MDC_MARK, ET1_MDIO_MARK,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- IRQ15_MARK, IRQ14_MARK, IRQ13_MARK, IRQ12_MARK,
- IRQ11_MARK, IRQ10_MARK, IRQ9_MARK, IRQ8_MARK,
- ON_NRE_MARK, ON_NWE_MARK, ON_NWP_MARK, ON_NCE0_MARK,
- ON_R_B0_MARK, ON_ALE_MARK, ON_CLE_MARK, TCLK_MARK,
-
- /* PTC (mobule: IRQ, PWMU) */
- IRQ7_MARK, IRQ6_MARK, IRQ5_MARK, IRQ4_MARK,
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
- PWMU0_MARK, PWMU1_MARK, PWMU2_MARK, PWMU3_MARK,
- PWMU4_MARK, PWMU5_MARK,
-
- /* PTD (mobule: SPI0, DMAC) */
- SP0_MOSI_MARK, SP0_MISO_MARK, SP0_SCK_MARK, SP0_SCK_FB_MARK,
- SP0_SS0_MARK, SP0_SS1_MARK, SP0_SS2_MARK, SP0_SS3_MARK,
- DREQ0_MARK, DACK0_MARK, TEND0_MARK,
-
- /* PTE (mobule: RMII) */
- RMII0_CRS_DV_MARK, RMII0_TXD1_MARK,
- RMII0_TXD0_MARK, RMII0_TXEN_MARK,
- RMII0_REFCLK_MARK, RMII0_RXD1_MARK,
- RMII0_RXD0_MARK, RMII0_RX_ER_MARK,
-
- /* PTF (mobule: RMII, SerMux) */
- RMII1_CRS_DV_MARK, RMII1_TXD1_MARK,
- RMII1_TXD0_MARK, RMII1_TXEN_MARK,
- RMII1_REFCLK_MARK, RMII1_RXD1_MARK,
- RMII1_RXD0_MARK, RMII1_RX_ER_MARK,
- RAC_RI_MARK,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- BOOTFMS_MARK, BOOTWP_MARK, A25_MARK, A24_MARK,
- SERIRQ_MARK, WDTOVF_MARK, LPCPD_MARK, LDRQ_MARK,
- MMCCLK_MARK, MMCCMD_MARK,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- SP1_MOSI_MARK, SP1_MISO_MARK, SP1_SCK_MARK, SP1_SCK_FB_MARK,
- SP1_SS0_MARK, SP1_SS1_MARK, WP_MARK, FMS0_MARK,
- TEND1_MARK, DREQ1_MARK, DACK1_MARK, ADTRG1_MARK,
- ADTRG0_MARK,
-
- /* PTI (mobule: LBSC, SDHI) */
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- SD_WP_MARK, SD_CD_MARK, SD_CLK_MARK, SD_CMD_MARK,
- SD_D3_MARK, SD_D2_MARK, SD_D1_MARK, SD_D0_MARK,
-
- /* PTJ (mobule: SCIF234) */
- RTS3_MARK, CTS3_MARK, TXD3_MARK, RXD3_MARK,
- RTS4_MARK, RXD4_MARK, TXD4_MARK,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- COM2_TXD_MARK, COM2_RXD_MARK, COM2_RTS_MARK, COM2_CTS_MARK,
- COM2_DTR_MARK, COM2_DSR_MARK, COM2_DCD_MARK, CLKOUT_MARK,
- SCK2_MARK, SCK4_MARK, SCK3_MARK,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- RAC_RXD_MARK, RAC_RTS_MARK, RAC_CTS_MARK, RAC_DTR_MARK,
- RAC_DSR_MARK, RAC_DCD_MARK, RAC_TXD_MARK, RXD2_MARK,
- CS5_MARK, CS6_MARK, AUDSYNC_MARK, AUDCK_MARK,
- TXD2_MARK,
-
- /* PTM (mobule: LBSC, IIC) */
- CS4_MARK, RD_MARK, WE0_MARK, CS0_MARK,
- SDA6_MARK, SCL6_MARK, SDA7_MARK, SCL7_MARK,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- VBUS_EN_MARK, VBUS_OC_MARK, JMCTCK_MARK, JMCTMS_MARK,
- JMCTDO_MARK, JMCTDI_MARK, JMCTRST_MARK,
- SGPIO1_CLK_MARK, SGPIO1_LOAD_MARK, SGPIO1_DI_MARK,
- SGPIO1_DO_MARK, SUB_CLKIN_MARK,
-
- /* PTO (mobule: SGPIO, SerMux) */
- SGPIO0_CLK_MARK, SGPIO0_LOAD_MARK, SGPIO0_DI_MARK,
- SGPIO0_DO_MARK, SGPIO2_CLK_MARK, SGPIO2_LOAD_MARK,
- SGPIO2_DI_MARK, SGPIO2_DO_MARK,
- COM1_TXD_MARK, COM1_RXD_MARK, COM1_RTS_MARK, COM1_CTS_MARK,
-
- /* PTQ (mobule: LPC) */
- LAD3_MARK, LAD2_MARK, LAD1_MARK, LAD0_MARK,
- LFRAME_MARK, LRESET_MARK, LCLK_MARK,
-
- /* PTR (mobule: GRA, IIC) */
- DDC3_MARK, DDC2_MARK, SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK, SDA0_MARK, SCL0_MARK,
- SDA8_MARK, SCL8_MARK,
-
- /* PTS (mobule: GRA, IIC) */
- DDC1_MARK, DDC0_MARK, SDA5_MARK, SCL5_MARK,
- SDA4_MARK, SCL4_MARK, SDA3_MARK, SCL3_MARK,
- SDA9_MARK, SCL9_MARK,
-
- /* PTT (mobule: PWMX, AUD) */
- PWMX7_MARK, PWMX6_MARK, PWMX5_MARK, PWMX4_MARK,
- PWMX3_MARK, PWMX2_MARK, PWMX1_MARK, PWMX0_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- /* PTU (mobule: LPC, APM) */
- LGPIO7_MARK, LGPIO6_MARK, LGPIO5_MARK, LGPIO4_MARK,
- LGPIO3_MARK, LGPIO2_MARK, LGPIO1_MARK, LGPIO0_MARK,
- APMONCTL_O_MARK, APMPWBTOUT_O_MARK, APMSCI_O_MARK,
- APMVDDON_MARK, APMSLPBTN_MARK, APMPWRBTN_MARK, APMS5N_MARK,
- APMS3N_MARK,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- COM2_RI_MARK, R_SPI_MOSI_MARK, R_SPI_MISO_MARK,
- R_SPI_RSPCK_MARK, R_SPI_SSL0_MARK, R_SPI_SSL1_MARK,
- EVENT7_MARK, EVENT6_MARK, VBIOS_DI_MARK, VBIOS_DO_MARK,
- VBIOS_CLK_MARK, VBIOS_CS_MARK,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- EVENT5_MARK, EVENT4_MARK, EVENT3_MARK, EVENT2_MARK,
- EVENT1_MARK, EVENT0_MARK, CTS4_MARK, CTS2_MARK,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- RTS2_MARK, SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
-
- /* PTY (mobule: LBSC) */
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
-
- /* PTZ (mobule: eMMC, ONFI) */
- MMCDAT7_MARK, MMCDAT6_MARK, MMCDAT5_MARK, MMCDAT4_MARK,
- MMCDAT3_MARK, MMCDAT2_MARK, MMCDAT1_MARK, MMCDAT0_MARK,
- ON_DQ7_MARK, ON_DQ6_MARK, ON_DQ5_MARK, ON_DQ4_MARK,
- ON_DQ3_MARK, ON_DQ2_MARK, ON_DQ1_MARK, ON_DQ0_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG7_DATA, PTG7_IN, PTG7_OUT),
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTI GPIO */
- PINMUX_DATA(PTI7_DATA, PTI7_IN, PTI7_OUT),
- PINMUX_DATA(PTI6_DATA, PTI6_IN, PTI6_OUT),
- PINMUX_DATA(PTI5_DATA, PTI5_IN, PTI5_OUT),
- PINMUX_DATA(PTI4_DATA, PTI4_IN, PTI4_OUT),
- PINMUX_DATA(PTI3_DATA, PTI3_IN, PTI3_OUT),
- PINMUX_DATA(PTI2_DATA, PTI2_IN, PTI2_OUT),
- PINMUX_DATA(PTI1_DATA, PTI1_IN, PTI1_OUT),
- PINMUX_DATA(PTI0_DATA, PTI0_IN, PTI0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTO GPIO */
- PINMUX_DATA(PTO7_DATA, PTO7_IN, PTO7_OUT),
- PINMUX_DATA(PTO6_DATA, PTO6_IN, PTO6_OUT),
- PINMUX_DATA(PTO5_DATA, PTO5_IN, PTO5_OUT),
- PINMUX_DATA(PTO4_DATA, PTO4_IN, PTO4_OUT),
- PINMUX_DATA(PTO3_DATA, PTO3_IN, PTO3_OUT),
- PINMUX_DATA(PTO2_DATA, PTO2_IN, PTO2_OUT),
- PINMUX_DATA(PTO1_DATA, PTO1_IN, PTO1_OUT),
- PINMUX_DATA(PTO0_DATA, PTO0_IN, PTO0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(BS_MARK, PTA7_FN),
- PINMUX_DATA(RDWR_MARK, PTA6_FN),
- PINMUX_DATA(WE1_MARK, PTA5_FN),
- PINMUX_DATA(RDY_MARK, PTA4_FN),
- PINMUX_DATA(ET0_MDC_MARK, PTA3_FN),
- PINMUX_DATA(ET0_MDIO_MARK, PTA2_FN),
- PINMUX_DATA(ET1_MDC_MARK, PTA1_FN),
- PINMUX_DATA(ET1_MDIO_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(IRQ15_MARK, PS0_15_FN1, PTB7_FN),
- PINMUX_DATA(ON_NRE_MARK, PS0_15_FN2, PTB7_FN),
- PINMUX_DATA(IRQ14_MARK, PS0_14_FN1, PTB6_FN),
- PINMUX_DATA(ON_NWE_MARK, PS0_14_FN2, PTB6_FN),
- PINMUX_DATA(IRQ13_MARK, PS0_13_FN1, PTB5_FN),
- PINMUX_DATA(ON_NWP_MARK, PS0_13_FN2, PTB5_FN),
- PINMUX_DATA(IRQ12_MARK, PS0_12_FN1, PTB4_FN),
- PINMUX_DATA(ON_NCE0_MARK, PS0_12_FN2, PTB4_FN),
- PINMUX_DATA(IRQ11_MARK, PS0_11_FN1, PTB3_FN),
- PINMUX_DATA(ON_R_B0_MARK, PS0_11_FN2, PTB3_FN),
- PINMUX_DATA(IRQ10_MARK, PS0_10_FN1, PTB2_FN),
- PINMUX_DATA(ON_ALE_MARK, PS0_10_FN2, PTB2_FN),
- PINMUX_DATA(IRQ9_MARK, PS0_9_FN1, PTB1_FN),
- PINMUX_DATA(ON_CLE_MARK, PS0_9_FN2, PTB1_FN),
- PINMUX_DATA(IRQ8_MARK, PS0_8_FN1, PTB0_FN),
- PINMUX_DATA(TCLK_MARK, PS0_8_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IRQ7_MARK, PS0_7_FN1, PTC7_FN),
- PINMUX_DATA(PWMU0_MARK, PS0_7_FN2, PTC7_FN),
- PINMUX_DATA(IRQ6_MARK, PS0_6_FN1, PTC6_FN),
- PINMUX_DATA(PWMU1_MARK, PS0_6_FN2, PTC6_FN),
- PINMUX_DATA(IRQ5_MARK, PS0_5_FN1, PTC5_FN),
- PINMUX_DATA(PWMU2_MARK, PS0_5_FN2, PTC5_FN),
- PINMUX_DATA(IRQ4_MARK, PS0_4_FN1, PTC5_FN),
- PINMUX_DATA(PWMU3_MARK, PS0_4_FN2, PTC4_FN),
- PINMUX_DATA(IRQ3_MARK, PS0_3_FN1, PTC3_FN),
- PINMUX_DATA(PWMU4_MARK, PS0_3_FN2, PTC3_FN),
- PINMUX_DATA(IRQ2_MARK, PS0_2_FN1, PTC2_FN),
- PINMUX_DATA(PWMU5_MARK, PS0_2_FN2, PTC2_FN),
- PINMUX_DATA(IRQ1_MARK, PTC1_FN),
- PINMUX_DATA(IRQ0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(SP0_MOSI_MARK, PTD7_FN),
- PINMUX_DATA(SP0_MISO_MARK, PTD6_FN),
- PINMUX_DATA(SP0_SCK_MARK, PTD5_FN),
- PINMUX_DATA(SP0_SCK_FB_MARK, PTD4_FN),
- PINMUX_DATA(SP0_SS0_MARK, PTD3_FN),
- PINMUX_DATA(SP0_SS1_MARK, PS1_10_FN1, PTD2_FN),
- PINMUX_DATA(DREQ0_MARK, PS1_10_FN2, PTD2_FN),
- PINMUX_DATA(SP0_SS2_MARK, PS1_9_FN1, PTD1_FN),
- PINMUX_DATA(DACK0_MARK, PS1_9_FN2, PTD1_FN),
- PINMUX_DATA(SP0_SS3_MARK, PS1_8_FN1, PTD0_FN),
- PINMUX_DATA(TEND0_MARK, PS1_8_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(RMII0_CRS_DV_MARK, PTE7_FN),
- PINMUX_DATA(RMII0_TXD1_MARK, PTE6_FN),
- PINMUX_DATA(RMII0_TXD0_MARK, PTE5_FN),
- PINMUX_DATA(RMII0_TXEN_MARK, PTE4_FN),
- PINMUX_DATA(RMII0_REFCLK_MARK, PTE3_FN),
- PINMUX_DATA(RMII0_RXD1_MARK, PTE2_FN),
- PINMUX_DATA(RMII0_RXD0_MARK, PTE1_FN),
- PINMUX_DATA(RMII0_RX_ER_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(RMII1_CRS_DV_MARK, PTF7_FN),
- PINMUX_DATA(RMII1_TXD1_MARK, PTF6_FN),
- PINMUX_DATA(RMII1_TXD0_MARK, PTF5_FN),
- PINMUX_DATA(RMII1_TXEN_MARK, PTF4_FN),
- PINMUX_DATA(RMII1_REFCLK_MARK, PTF3_FN),
- PINMUX_DATA(RMII1_RXD1_MARK, PS1_2_FN1, PTF2_FN),
- PINMUX_DATA(RAC_RI_MARK, PS1_2_FN2, PTF2_FN),
- PINMUX_DATA(RMII1_RXD0_MARK, PTF1_FN),
- PINMUX_DATA(RMII1_RX_ER_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(BOOTFMS_MARK, PTG7_FN),
- PINMUX_DATA(BOOTWP_MARK, PTG6_FN),
- PINMUX_DATA(A25_MARK, PS2_13_FN1, PTG5_FN),
- PINMUX_DATA(MMCCLK_MARK, PS2_13_FN2, PTG5_FN),
- PINMUX_DATA(A24_MARK, PS2_12_FN1, PTG4_FN),
- PINMUX_DATA(MMCCMD_MARK, PS2_12_FN2, PTG4_FN),
- PINMUX_DATA(SERIRQ_MARK, PTG3_FN),
- PINMUX_DATA(WDTOVF_MARK, PTG2_FN),
- PINMUX_DATA(LPCPD_MARK, PTG1_FN),
- PINMUX_DATA(LDRQ_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(SP1_MOSI_MARK, PS2_7_FN1, PTH7_FN),
- PINMUX_DATA(TEND1_MARK, PS2_7_FN2, PTH7_FN),
- PINMUX_DATA(SP1_MISO_MARK, PS2_6_FN1, PTH6_FN),
- PINMUX_DATA(DREQ1_MARK, PS2_6_FN2, PTH6_FN),
- PINMUX_DATA(SP1_SCK_MARK, PS2_5_FN1, PTH5_FN),
- PINMUX_DATA(DACK1_MARK, PS2_5_FN2, PTH5_FN),
- PINMUX_DATA(SP1_SCK_FB_MARK, PS2_4_FN1, PTH4_FN),
- PINMUX_DATA(ADTRG1_MARK, PS2_4_FN2, PTH4_FN),
- PINMUX_DATA(SP1_SS0_MARK, PTH3_FN),
- PINMUX_DATA(SP1_SS1_MARK, PS2_2_FN1, PTH2_FN),
- PINMUX_DATA(ADTRG0_MARK, PS2_2_FN2, PTH2_FN),
- PINMUX_DATA(WP_MARK, PTH1_FN),
- PINMUX_DATA(FMS0_MARK, PTH0_FN),
-
- /* PTI FN */
- PINMUX_DATA(D15_MARK, PS3_15_FN1, PTI7_FN),
- PINMUX_DATA(SD_WP_MARK, PS3_15_FN2, PTI7_FN),
- PINMUX_DATA(D14_MARK, PS3_14_FN1, PTI6_FN),
- PINMUX_DATA(SD_CD_MARK, PS3_14_FN2, PTI6_FN),
- PINMUX_DATA(D13_MARK, PS3_13_FN1, PTI5_FN),
- PINMUX_DATA(SD_CLK_MARK, PS3_13_FN2, PTI5_FN),
- PINMUX_DATA(D12_MARK, PS3_12_FN1, PTI4_FN),
- PINMUX_DATA(SD_CMD_MARK, PS3_12_FN2, PTI4_FN),
- PINMUX_DATA(D11_MARK, PS3_11_FN1, PTI3_FN),
- PINMUX_DATA(SD_D3_MARK, PS3_11_FN2, PTI3_FN),
- PINMUX_DATA(D10_MARK, PS3_10_FN1, PTI2_FN),
- PINMUX_DATA(SD_D2_MARK, PS3_10_FN2, PTI2_FN),
- PINMUX_DATA(D9_MARK, PS3_9_FN1, PTI1_FN),
- PINMUX_DATA(SD_D1_MARK, PS3_9_FN2, PTI1_FN),
- PINMUX_DATA(D8_MARK, PS3_8_FN1, PTI0_FN),
- PINMUX_DATA(SD_D0_MARK, PS3_8_FN2, PTI0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(RTS3_MARK, PTJ6_FN),
- PINMUX_DATA(CTS3_MARK, PTJ5_FN),
- PINMUX_DATA(TXD3_MARK, PTJ4_FN),
- PINMUX_DATA(RXD3_MARK, PTJ3_FN),
- PINMUX_DATA(RTS4_MARK, PTJ2_FN),
- PINMUX_DATA(RXD4_MARK, PTJ1_FN),
- PINMUX_DATA(TXD4_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(COM2_TXD_MARK, PS3_7_FN1, PTK7_FN),
- PINMUX_DATA(SCK2_MARK, PS3_7_FN2, PTK7_FN),
- PINMUX_DATA(COM2_RXD_MARK, PTK6_FN),
- PINMUX_DATA(COM2_RTS_MARK, PTK5_FN),
- PINMUX_DATA(COM2_CTS_MARK, PTK4_FN),
- PINMUX_DATA(COM2_DTR_MARK, PTK3_FN),
- PINMUX_DATA(COM2_DSR_MARK, PS3_2_FN1, PTK2_FN),
- PINMUX_DATA(SCK4_MARK, PS3_2_FN2, PTK2_FN),
- PINMUX_DATA(COM2_DCD_MARK, PS3_1_FN1, PTK1_FN),
- PINMUX_DATA(SCK3_MARK, PS3_1_FN2, PTK1_FN),
- PINMUX_DATA(CLKOUT_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(RAC_RXD_MARK, PS4_14_FN1, PTL6_FN),
- PINMUX_DATA(RXD2_MARK, PS4_14_FN2, PTL6_FN),
- PINMUX_DATA(RAC_RTS_MARK, PS4_13_FN1, PTL5_FN),
- PINMUX_DATA(CS5_MARK, PS4_13_FN2, PTL5_FN),
- PINMUX_DATA(RAC_CTS_MARK, PS4_12_FN1, PTL4_FN),
- PINMUX_DATA(CS6_MARK, PS4_12_FN2, PTL4_FN),
- PINMUX_DATA(RAC_DTR_MARK, PTL3_FN),
- PINMUX_DATA(RAC_DSR_MARK, PS4_10_FN1, PTL2_FN),
- PINMUX_DATA(AUDSYNC_MARK, PS4_10_FN2, PTL2_FN),
- PINMUX_DATA(RAC_DCD_MARK, PS4_9_FN1, PTL1_FN),
- PINMUX_DATA(AUDCK_MARK, PS4_9_FN2, PTL1_FN),
- PINMUX_DATA(RAC_TXD_MARK, PS4_8_FN1, PTL0_FN),
- PINMUX_DATA(TXD2_MARK, PS4_8_FN1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(CS4_MARK, PTM7_FN),
- PINMUX_DATA(RD_MARK, PTM6_FN),
- PINMUX_DATA(WE0_MARK, PTM7_FN),
- PINMUX_DATA(CS0_MARK, PTM4_FN),
- PINMUX_DATA(SDA6_MARK, PTM3_FN),
- PINMUX_DATA(SCL6_MARK, PTM2_FN),
- PINMUX_DATA(SDA7_MARK, PTM1_FN),
- PINMUX_DATA(SCL7_MARK, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VBUS_EN_MARK, PTN6_FN),
- PINMUX_DATA(VBUS_OC_MARK, PTN5_FN),
- PINMUX_DATA(JMCTCK_MARK, PS4_4_FN1, PTN4_FN),
- PINMUX_DATA(SGPIO1_CLK_MARK, PS4_4_FN2, PTN4_FN),
- PINMUX_DATA(JMCTMS_MARK, PS4_3_FN1, PTN5_FN),
- PINMUX_DATA(SGPIO1_LOAD_MARK, PS4_3_FN2, PTN5_FN),
- PINMUX_DATA(JMCTDO_MARK, PS4_2_FN1, PTN2_FN),
- PINMUX_DATA(SGPIO1_DO_MARK, PS4_2_FN2, PTN2_FN),
- PINMUX_DATA(JMCTDI_MARK, PS4_1_FN1, PTN1_FN),
- PINMUX_DATA(SGPIO1_DI_MARK, PS4_1_FN2, PTN1_FN),
- PINMUX_DATA(JMCTRST_MARK, PS4_0_FN1, PTN0_FN),
- PINMUX_DATA(SUB_CLKIN_MARK, PS4_0_FN2, PTN0_FN),
-
- /* PTO FN */
- PINMUX_DATA(SGPIO0_CLK_MARK, PTO7_FN),
- PINMUX_DATA(SGPIO0_LOAD_MARK, PTO6_FN),
- PINMUX_DATA(SGPIO0_DI_MARK, PTO5_FN),
- PINMUX_DATA(SGPIO0_DO_MARK, PTO4_FN),
- PINMUX_DATA(SGPIO2_CLK_MARK, PS5_11_FN1, PTO3_FN),
- PINMUX_DATA(COM1_TXD_MARK, PS5_11_FN2, PTO3_FN),
- PINMUX_DATA(SGPIO2_LOAD_MARK, PS5_10_FN1, PTO2_FN),
- PINMUX_DATA(COM1_RXD_MARK, PS5_10_FN2, PTO2_FN),
- PINMUX_DATA(SGPIO2_DI_MARK, PS5_9_FN1, PTO1_FN),
- PINMUX_DATA(COM1_RTS_MARK, PS5_9_FN2, PTO1_FN),
- PINMUX_DATA(SGPIO2_DO_MARK, PS5_8_FN1, PTO0_FN),
- PINMUX_DATA(COM1_CTS_MARK, PS5_8_FN2, PTO0_FN),
-
- /* PTP FN */
-
- /* PTQ FN */
- PINMUX_DATA(LAD3_MARK, PTQ6_FN),
- PINMUX_DATA(LAD2_MARK, PTQ5_FN),
- PINMUX_DATA(LAD1_MARK, PTQ4_FN),
- PINMUX_DATA(LAD0_MARK, PTQ3_FN),
- PINMUX_DATA(LFRAME_MARK, PTQ2_FN),
- PINMUX_DATA(LRESET_MARK, PTQ1_FN),
- PINMUX_DATA(LCLK_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(SDA8_MARK, PTR7_FN), /* DDC3? */
- PINMUX_DATA(SCL8_MARK, PTR6_FN), /* DDC2? */
- PINMUX_DATA(SDA2_MARK, PTR5_FN),
- PINMUX_DATA(SCL2_MARK, PTR4_FN),
- PINMUX_DATA(SDA1_MARK, PTR3_FN),
- PINMUX_DATA(SCL1_MARK, PTR2_FN),
- PINMUX_DATA(SDA0_MARK, PTR1_FN),
- PINMUX_DATA(SCL0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SDA9_MARK, PTS7_FN), /* DDC1? */
- PINMUX_DATA(SCL9_MARK, PTS6_FN), /* DDC0? */
- PINMUX_DATA(SDA5_MARK, PTS5_FN),
- PINMUX_DATA(SCL5_MARK, PTS4_FN),
- PINMUX_DATA(SDA4_MARK, PTS3_FN),
- PINMUX_DATA(SCL4_MARK, PTS2_FN),
- PINMUX_DATA(SDA3_MARK, PTS1_FN),
- PINMUX_DATA(SCL3_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(PWMX7_MARK, PS5_7_FN1, PTT7_FN),
- PINMUX_DATA(AUDATA3_MARK, PS5_7_FN2, PTT7_FN),
- PINMUX_DATA(PWMX6_MARK, PS5_6_FN1, PTT6_FN),
- PINMUX_DATA(AUDATA2_MARK, PS5_6_FN2, PTT6_FN),
- PINMUX_DATA(PWMX5_MARK, PS5_5_FN1, PTT5_FN),
- PINMUX_DATA(AUDATA1_MARK, PS5_5_FN2, PTT5_FN),
- PINMUX_DATA(PWMX4_MARK, PS5_4_FN1, PTT4_FN),
- PINMUX_DATA(AUDATA0_MARK, PS5_4_FN2, PTT4_FN),
- PINMUX_DATA(PWMX3_MARK, PS5_3_FN1, PTT3_FN),
- PINMUX_DATA(STATUS1_MARK, PS5_3_FN2, PTT3_FN),
- PINMUX_DATA(PWMX2_MARK, PS5_2_FN1, PTT2_FN),
- PINMUX_DATA(STATUS0_MARK, PS5_2_FN2, PTT2_FN),
- PINMUX_DATA(PWMX1_MARK, PTT1_FN),
- PINMUX_DATA(PWMX0_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(LGPIO7_MARK, PS6_15_FN1, PTU7_FN),
- PINMUX_DATA(APMONCTL_O_MARK, PS6_15_FN2, PTU7_FN),
- PINMUX_DATA(LGPIO6_MARK, PS6_14_FN1, PTU6_FN),
- PINMUX_DATA(APMPWBTOUT_O_MARK, PS6_14_FN2, PTU6_FN),
- PINMUX_DATA(LGPIO5_MARK, PS6_13_FN1, PTU5_FN),
- PINMUX_DATA(APMSCI_O_MARK, PS6_13_FN2, PTU5_FN),
- PINMUX_DATA(LGPIO4_MARK, PS6_12_FN1, PTU4_FN),
- PINMUX_DATA(APMVDDON_MARK, PS6_12_FN2, PTU4_FN),
- PINMUX_DATA(LGPIO3_MARK, PS6_11_FN1, PTU3_FN),
- PINMUX_DATA(APMSLPBTN_MARK, PS6_11_FN2, PTU3_FN),
- PINMUX_DATA(LGPIO2_MARK, PS6_10_FN1, PTU2_FN),
- PINMUX_DATA(APMPWRBTN_MARK, PS6_10_FN2, PTU2_FN),
- PINMUX_DATA(LGPIO1_MARK, PS6_9_FN1, PTU1_FN),
- PINMUX_DATA(APMS5N_MARK, PS6_9_FN2, PTU1_FN),
- PINMUX_DATA(LGPIO0_MARK, PS6_8_FN1, PTU0_FN),
- PINMUX_DATA(APMS3N_MARK, PS6_8_FN2, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(A23_MARK, PS6_7_FN1, PTV7_FN),
- PINMUX_DATA(COM2_RI_MARK, PS6_7_FN2, PTV7_FN),
- PINMUX_DATA(A22_MARK, PS6_6_FN1, PTV6_FN),
- PINMUX_DATA(R_SPI_MOSI_MARK, PS6_6_FN2, PTV6_FN),
- PINMUX_DATA(A21_MARK, PS6_5_FN1, PTV5_FN),
- PINMUX_DATA(R_SPI_MISO_MARK, PS6_5_FN2, PTV5_FN),
- PINMUX_DATA(A20_MARK, PS6_4_FN1, PTV4_FN),
- PINMUX_DATA(R_SPI_RSPCK_MARK, PS6_4_FN2, PTV4_FN),
- PINMUX_DATA(A19_MARK, PS6_3_FN1, PTV3_FN),
- PINMUX_DATA(R_SPI_SSL0_MARK, PS6_3_FN2, PTV3_FN),
- PINMUX_DATA(A18_MARK, PS6_2_FN1, PTV2_FN),
- PINMUX_DATA(R_SPI_SSL1_MARK, PS6_2_FN2, PTV2_FN),
- PINMUX_DATA(A17_MARK, PS6_1_FN1, PTV1_FN),
- PINMUX_DATA(EVENT7_MARK, PS6_1_FN2, PTV1_FN),
- PINMUX_DATA(A16_MARK, PS6_0_FN1, PTV0_FN),
- PINMUX_DATA(EVENT6_MARK, PS6_0_FN1, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(A15_MARK, PS7_15_FN1, PTW7_FN),
- PINMUX_DATA(EVENT5_MARK, PS7_15_FN2, PTW7_FN),
- PINMUX_DATA(A14_MARK, PS7_14_FN1, PTW6_FN),
- PINMUX_DATA(EVENT4_MARK, PS7_14_FN2, PTW6_FN),
- PINMUX_DATA(A13_MARK, PS7_13_FN1, PTW5_FN),
- PINMUX_DATA(EVENT3_MARK, PS7_13_FN2, PTW5_FN),
- PINMUX_DATA(A12_MARK, PS7_12_FN1, PTW4_FN),
- PINMUX_DATA(EVENT2_MARK, PS7_12_FN2, PTW4_FN),
- PINMUX_DATA(A11_MARK, PS7_11_FN1, PTW3_FN),
- PINMUX_DATA(EVENT1_MARK, PS7_11_FN2, PTW3_FN),
- PINMUX_DATA(A10_MARK, PS7_10_FN1, PTW2_FN),
- PINMUX_DATA(EVENT0_MARK, PS7_10_FN2, PTW2_FN),
- PINMUX_DATA(A9_MARK, PS7_9_FN1, PTW1_FN),
- PINMUX_DATA(CTS4_MARK, PS7_9_FN2, PTW1_FN),
- PINMUX_DATA(A8_MARK, PS7_8_FN1, PTW0_FN),
- PINMUX_DATA(CTS2_MARK, PS7_8_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(A7_MARK, PS7_7_FN1, PTX7_FN),
- PINMUX_DATA(RTS2_MARK, PS7_7_FN2, PTX7_FN),
- PINMUX_DATA(A6_MARK, PS7_6_FN1, PTX6_FN),
- PINMUX_DATA(SIM_D_MARK, PS7_6_FN2, PTX6_FN),
- PINMUX_DATA(A5_MARK, PS7_5_FN1, PTX5_FN),
- PINMUX_DATA(SIM_CLK_MARK, PS7_5_FN2, PTX5_FN),
- PINMUX_DATA(A4_MARK, PS7_4_FN1, PTX4_FN),
- PINMUX_DATA(SIM_RST_MARK, PS7_4_FN2, PTX4_FN),
- PINMUX_DATA(A3_MARK, PTX3_FN),
- PINMUX_DATA(A2_MARK, PTX2_FN),
- PINMUX_DATA(A1_MARK, PTX1_FN),
- PINMUX_DATA(A0_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(D7_MARK, PTY7_FN),
- PINMUX_DATA(D6_MARK, PTY6_FN),
- PINMUX_DATA(D5_MARK, PTY5_FN),
- PINMUX_DATA(D4_MARK, PTY4_FN),
- PINMUX_DATA(D3_MARK, PTY3_FN),
- PINMUX_DATA(D2_MARK, PTY2_FN),
- PINMUX_DATA(D1_MARK, PTY1_FN),
- PINMUX_DATA(D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(MMCDAT7_MARK, PS8_15_FN1, PTZ7_FN),
- PINMUX_DATA(ON_DQ7_MARK, PS8_15_FN2, PTZ7_FN),
- PINMUX_DATA(MMCDAT6_MARK, PS8_14_FN1, PTZ6_FN),
- PINMUX_DATA(ON_DQ6_MARK, PS8_14_FN2, PTZ6_FN),
- PINMUX_DATA(MMCDAT5_MARK, PS8_13_FN1, PTZ5_FN),
- PINMUX_DATA(ON_DQ5_MARK, PS8_13_FN2, PTZ5_FN),
- PINMUX_DATA(MMCDAT4_MARK, PS8_12_FN1, PTZ4_FN),
- PINMUX_DATA(ON_DQ4_MARK, PS8_12_FN2, PTZ4_FN),
- PINMUX_DATA(MMCDAT3_MARK, PS8_11_FN1, PTZ3_FN),
- PINMUX_DATA(ON_DQ3_MARK, PS8_11_FN2, PTZ3_FN),
- PINMUX_DATA(MMCDAT2_MARK, PS8_10_FN1, PTZ2_FN),
- PINMUX_DATA(ON_DQ2_MARK, PS8_10_FN2, PTZ2_FN),
- PINMUX_DATA(MMCDAT1_MARK, PS8_9_FN1, PTZ1_FN),
- PINMUX_DATA(ON_DQ1_MARK, PS8_9_FN2, PTZ1_FN),
- PINMUX_DATA(MMCDAT0_MARK, PS8_8_FN1, PTZ0_FN),
- PINMUX_DATA(ON_DQ0_MARK, PS8_8_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG7),
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTI */
- PINMUX_GPIO(PTI7),
- PINMUX_GPIO(PTI6),
- PINMUX_GPIO(PTI5),
- PINMUX_GPIO(PTI4),
- PINMUX_GPIO(PTI3),
- PINMUX_GPIO(PTI2),
- PINMUX_GPIO(PTI1),
- PINMUX_GPIO(PTI0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTO */
- PINMUX_GPIO(PTO7),
- PINMUX_GPIO(PTO6),
- PINMUX_GPIO(PTO5),
- PINMUX_GPIO(PTO4),
- PINMUX_GPIO(PTO3),
- PINMUX_GPIO(PTO2),
- PINMUX_GPIO(PTO1),
- PINMUX_GPIO(PTO0),
-
- /* PTP */
- PINMUX_GPIO(PTP7),
- PINMUX_GPIO(PTP6),
- PINMUX_GPIO(PTP5),
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN(BS),
- GPIO_FN(RDWR),
- GPIO_FN(WE1),
- GPIO_FN(RDY),
- GPIO_FN(ET0_MDC),
- GPIO_FN(ET0_MDIO),
- GPIO_FN(ET1_MDC),
- GPIO_FN(ET1_MDIO),
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN(IRQ15),
- GPIO_FN(IRQ14),
- GPIO_FN(IRQ13),
- GPIO_FN(IRQ12),
- GPIO_FN(IRQ11),
- GPIO_FN(IRQ10),
- GPIO_FN(IRQ9),
- GPIO_FN(IRQ8),
- GPIO_FN(ON_NRE),
- GPIO_FN(ON_NWE),
- GPIO_FN(ON_NWP),
- GPIO_FN(ON_NCE0),
- GPIO_FN(ON_R_B0),
- GPIO_FN(ON_ALE),
- GPIO_FN(ON_CLE),
- GPIO_FN(TCLK),
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN(IRQ7),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(PWMU0),
- GPIO_FN(PWMU1),
- GPIO_FN(PWMU2),
- GPIO_FN(PWMU3),
- GPIO_FN(PWMU4),
- GPIO_FN(PWMU5),
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN(SP0_MOSI),
- GPIO_FN(SP0_MISO),
- GPIO_FN(SP0_SCK),
- GPIO_FN(SP0_SCK_FB),
- GPIO_FN(SP0_SS0),
- GPIO_FN(SP0_SS1),
- GPIO_FN(SP0_SS2),
- GPIO_FN(SP0_SS3),
- GPIO_FN(DREQ0),
- GPIO_FN(DACK0),
- GPIO_FN(TEND0),
-
- /* PTE (mobule: RMII) */
- GPIO_FN(RMII0_CRS_DV),
- GPIO_FN(RMII0_TXD1),
- GPIO_FN(RMII0_TXD0),
- GPIO_FN(RMII0_TXEN),
- GPIO_FN(RMII0_REFCLK),
- GPIO_FN(RMII0_RXD1),
- GPIO_FN(RMII0_RXD0),
- GPIO_FN(RMII0_RX_ER),
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN(RMII1_CRS_DV),
- GPIO_FN(RMII1_TXD1),
- GPIO_FN(RMII1_TXD0),
- GPIO_FN(RMII1_TXEN),
- GPIO_FN(RMII1_REFCLK),
- GPIO_FN(RMII1_RXD1),
- GPIO_FN(RMII1_RXD0),
- GPIO_FN(RMII1_RX_ER),
- GPIO_FN(RAC_RI),
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN(BOOTFMS),
- GPIO_FN(BOOTWP),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(SERIRQ),
- GPIO_FN(WDTOVF),
- GPIO_FN(LPCPD),
- GPIO_FN(LDRQ),
- GPIO_FN(MMCCLK),
- GPIO_FN(MMCCMD),
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN(SP1_MOSI),
- GPIO_FN(SP1_MISO),
- GPIO_FN(SP1_SCK),
- GPIO_FN(SP1_SCK_FB),
- GPIO_FN(SP1_SS0),
- GPIO_FN(SP1_SS1),
- GPIO_FN(WP),
- GPIO_FN(FMS0),
- GPIO_FN(TEND1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK1),
- GPIO_FN(ADTRG1),
- GPIO_FN(ADTRG0),
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(SD_WP),
- GPIO_FN(SD_CD),
- GPIO_FN(SD_CLK),
- GPIO_FN(SD_CMD),
- GPIO_FN(SD_D3),
- GPIO_FN(SD_D2),
- GPIO_FN(SD_D1),
- GPIO_FN(SD_D0),
-
- /* PTJ (mobule: SCIF234, SERMUX) */
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(RTS4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD4),
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN(COM2_TXD),
- GPIO_FN(COM2_RXD),
- GPIO_FN(COM2_RTS),
- GPIO_FN(COM2_CTS),
- GPIO_FN(COM2_DTR),
- GPIO_FN(COM2_DSR),
- GPIO_FN(COM2_DCD),
- GPIO_FN(CLKOUT),
- GPIO_FN(SCK2),
- GPIO_FN(SCK4),
- GPIO_FN(SCK3),
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN(RAC_RXD),
- GPIO_FN(RAC_RTS),
- GPIO_FN(RAC_CTS),
- GPIO_FN(RAC_DTR),
- GPIO_FN(RAC_DSR),
- GPIO_FN(RAC_DCD),
- GPIO_FN(RAC_TXD),
- GPIO_FN(RXD2),
- GPIO_FN(CS5),
- GPIO_FN(CS6),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDCK),
- GPIO_FN(TXD2),
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN(CS4),
- GPIO_FN(RD),
- GPIO_FN(WE0),
- GPIO_FN(CS0),
- GPIO_FN(SDA6),
- GPIO_FN(SCL6),
- GPIO_FN(SDA7),
- GPIO_FN(SCL7),
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN(VBUS_EN),
- GPIO_FN(VBUS_OC),
- GPIO_FN(JMCTCK),
- GPIO_FN(JMCTMS),
- GPIO_FN(JMCTDO),
- GPIO_FN(JMCTDI),
- GPIO_FN(JMCTRST),
- GPIO_FN(SGPIO1_CLK),
- GPIO_FN(SGPIO1_LOAD),
- GPIO_FN(SGPIO1_DI),
- GPIO_FN(SGPIO1_DO),
- GPIO_FN(SUB_CLKIN),
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN(SGPIO0_CLK),
- GPIO_FN(SGPIO0_LOAD),
- GPIO_FN(SGPIO0_DI),
- GPIO_FN(SGPIO0_DO),
- GPIO_FN(SGPIO2_CLK),
- GPIO_FN(SGPIO2_LOAD),
- GPIO_FN(SGPIO2_DI),
- GPIO_FN(SGPIO2_DO),
- GPIO_FN(COM1_TXD),
- GPIO_FN(COM1_RXD),
- GPIO_FN(COM1_RTS),
- GPIO_FN(COM1_CTS),
-
- /* PTP (mobule: EVC, ADC) */
-
- /* PTQ (mobule: LPC) */
- GPIO_FN(LAD3),
- GPIO_FN(LAD2),
- GPIO_FN(LAD1),
- GPIO_FN(LAD0),
- GPIO_FN(LFRAME),
- GPIO_FN(LRESET),
- GPIO_FN(LCLK),
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN(DDC3),
- GPIO_FN(DDC2),
- GPIO_FN(SDA8),
- GPIO_FN(SCL8),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN(DDC1),
- GPIO_FN(DDC0),
- GPIO_FN(SDA9),
- GPIO_FN(SCL9),
- GPIO_FN(SDA5),
- GPIO_FN(SCL5),
- GPIO_FN(SDA4),
- GPIO_FN(SCL4),
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN(PWMX7),
- GPIO_FN(PWMX6),
- GPIO_FN(PWMX5),
- GPIO_FN(PWMX4),
- GPIO_FN(PWMX3),
- GPIO_FN(PWMX2),
- GPIO_FN(PWMX1),
- GPIO_FN(PWMX0),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN(LGPIO7),
- GPIO_FN(LGPIO6),
- GPIO_FN(LGPIO5),
- GPIO_FN(LGPIO4),
- GPIO_FN(LGPIO3),
- GPIO_FN(LGPIO2),
- GPIO_FN(LGPIO1),
- GPIO_FN(LGPIO0),
- GPIO_FN(APMONCTL_O),
- GPIO_FN(APMPWBTOUT_O),
- GPIO_FN(APMSCI_O),
- GPIO_FN(APMVDDON),
- GPIO_FN(APMSLPBTN),
- GPIO_FN(APMPWRBTN),
- GPIO_FN(APMS5N),
- GPIO_FN(APMS3N),
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(COM2_RI),
- GPIO_FN(R_SPI_MOSI),
- GPIO_FN(R_SPI_MISO),
- GPIO_FN(R_SPI_RSPCK),
- GPIO_FN(R_SPI_SSL0),
- GPIO_FN(R_SPI_SSL1),
- GPIO_FN(EVENT7),
- GPIO_FN(EVENT6),
- GPIO_FN(VBIOS_DI),
- GPIO_FN(VBIOS_DO),
- GPIO_FN(VBIOS_CLK),
- GPIO_FN(VBIOS_CS),
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(EVENT5),
- GPIO_FN(EVENT4),
- GPIO_FN(EVENT3),
- GPIO_FN(EVENT2),
- GPIO_FN(EVENT1),
- GPIO_FN(EVENT0),
- GPIO_FN(CTS4),
- GPIO_FN(CTS2),
-
- /* PTX (mobule: LBSC) */
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(RTS2),
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* PTY (mobule: LBSC) */
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN(MMCDAT7),
- GPIO_FN(MMCDAT6),
- GPIO_FN(MMCDAT5),
- GPIO_FN(MMCDAT4),
- GPIO_FN(MMCDAT3),
- GPIO_FN(MMCDAT2),
- GPIO_FN(MMCDAT1),
- GPIO_FN(MMCDAT0),
- GPIO_FN(ON_DQ7),
- GPIO_FN(ON_DQ6),
- GPIO_FN(ON_DQ5),
- GPIO_FN(ON_DQ4),
- GPIO_FN(ON_DQ3),
- GPIO_FN(ON_DQ2),
- GPIO_FN(ON_DQ1),
- GPIO_FN(ON_DQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffec0000, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, PTA7_IN, 0,
- PTA6_FN, PTA6_OUT, PTA6_IN, 0,
- PTA5_FN, PTA5_OUT, PTA5_IN, 0,
- PTA4_FN, PTA4_OUT, PTA4_IN, 0,
- PTA3_FN, PTA3_OUT, PTA3_IN, 0,
- PTA2_FN, PTA2_OUT, PTA2_IN, 0,
- PTA1_FN, PTA1_OUT, PTA1_IN, 0,
- PTA0_FN, PTA0_OUT, PTA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffec0002, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, PTB7_IN, 0,
- PTB6_FN, PTB6_OUT, PTB6_IN, 0,
- PTB5_FN, PTB5_OUT, PTB5_IN, 0,
- PTB4_FN, PTB4_OUT, PTB4_IN, 0,
- PTB3_FN, PTB3_OUT, PTB3_IN, 0,
- PTB2_FN, PTB2_OUT, PTB2_IN, 0,
- PTB1_FN, PTB1_OUT, PTB1_IN, 0,
- PTB0_FN, PTB0_OUT, PTB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffec0004, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, PTC7_IN, 0,
- PTC6_FN, PTC6_OUT, PTC6_IN, 0,
- PTC5_FN, PTC5_OUT, PTC5_IN, 0,
- PTC4_FN, PTC4_OUT, PTC4_IN, 0,
- PTC3_FN, PTC3_OUT, PTC3_IN, 0,
- PTC2_FN, PTC2_OUT, PTC2_IN, 0,
- PTC1_FN, PTC1_OUT, PTC1_IN, 0,
- PTC0_FN, PTC0_OUT, PTC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffec0006, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, PTD7_IN, 0,
- PTD6_FN, PTD6_OUT, PTD6_IN, 0,
- PTD5_FN, PTD5_OUT, PTD5_IN, 0,
- PTD4_FN, PTD4_OUT, PTD4_IN, 0,
- PTD3_FN, PTD3_OUT, PTD3_IN, 0,
- PTD2_FN, PTD2_OUT, PTD2_IN, 0,
- PTD1_FN, PTD1_OUT, PTD1_IN, 0,
- PTD0_FN, PTD0_OUT, PTD0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PECR", 0xffec0008, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, PTE7_IN, 0,
- PTE6_FN, PTE6_OUT, PTE6_IN, 0,
- PTE5_FN, PTE5_OUT, PTE5_IN, 0,
- PTE4_FN, PTE4_OUT, PTE4_IN, 0,
- PTE3_FN, PTE3_OUT, PTE3_IN, 0,
- PTE2_FN, PTE2_OUT, PTE2_IN, 0,
- PTE1_FN, PTE1_OUT, PTE1_IN, 0,
- PTE0_FN, PTE0_OUT, PTE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffec000a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, PTF7_IN, 0,
- PTF6_FN, PTF6_OUT, PTF6_IN, 0,
- PTF5_FN, PTF5_OUT, PTF5_IN, 0,
- PTF4_FN, PTF4_OUT, PTF4_IN, 0,
- PTF3_FN, PTF3_OUT, PTF3_IN, 0,
- PTF2_FN, PTF2_OUT, PTF2_IN, 0,
- PTF1_FN, PTF1_OUT, PTF1_IN, 0,
- PTF0_FN, PTF0_OUT, PTF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffec000c, 16, 2, GROUP(
- PTG7_FN, PTG7_OUT, PTG7_IN, 0,
- PTG6_FN, PTG6_OUT, PTG6_IN, 0,
- PTG5_FN, PTG5_OUT, PTG5_IN, 0,
- PTG4_FN, PTG4_OUT, PTG4_IN, 0,
- PTG3_FN, PTG3_OUT, PTG3_IN, 0,
- PTG2_FN, PTG2_OUT, PTG2_IN, 0,
- PTG1_FN, PTG1_OUT, PTG1_IN, 0,
- PTG0_FN, PTG0_OUT, PTG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffec000e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, PTH7_IN, 0,
- PTH6_FN, PTH6_OUT, PTH6_IN, 0,
- PTH5_FN, PTH5_OUT, PTH5_IN, 0,
- PTH4_FN, PTH4_OUT, PTH4_IN, 0,
- PTH3_FN, PTH3_OUT, PTH3_IN, 0,
- PTH2_FN, PTH2_OUT, PTH2_IN, 0,
- PTH1_FN, PTH1_OUT, PTH1_IN, 0,
- PTH0_FN, PTH0_OUT, PTH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PICR", 0xffec0010, 16, 2, GROUP(
- PTI7_FN, PTI7_OUT, PTI7_IN, 0,
- PTI6_FN, PTI6_OUT, PTI6_IN, 0,
- PTI5_FN, PTI5_OUT, PTI5_IN, 0,
- PTI4_FN, PTI4_OUT, PTI4_IN, 0,
- PTI3_FN, PTI3_OUT, PTI3_IN, 0,
- PTI2_FN, PTI2_OUT, PTI2_IN, 0,
- PTI1_FN, PTI1_OUT, PTI1_IN, 0,
- PTI0_FN, PTI0_OUT, PTI0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffec0012, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTJ6_FN, PTJ6_OUT, PTJ6_IN, 0,
- PTJ5_FN, PTJ5_OUT, PTJ5_IN, 0,
- PTJ4_FN, PTJ4_OUT, PTJ4_IN, 0,
- PTJ3_FN, PTJ3_OUT, PTJ3_IN, 0,
- PTJ2_FN, PTJ2_OUT, PTJ2_IN, 0,
- PTJ1_FN, PTJ1_OUT, PTJ1_IN, 0,
- PTJ0_FN, PTJ0_OUT, PTJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffec0014, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, PTK7_IN, 0,
- PTK6_FN, PTK6_OUT, PTK6_IN, 0,
- PTK5_FN, PTK5_OUT, PTK5_IN, 0,
- PTK4_FN, PTK4_OUT, PTK4_IN, 0,
- PTK3_FN, PTK3_OUT, PTK3_IN, 0,
- PTK2_FN, PTK2_OUT, PTK2_IN, 0,
- PTK1_FN, PTK1_OUT, PTK1_IN, 0,
- PTK0_FN, PTK0_OUT, PTK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffec0016, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTL6_FN, PTL6_OUT, PTL6_IN, 0,
- PTL5_FN, PTL5_OUT, PTL5_IN, 0,
- PTL4_FN, PTL4_OUT, PTL4_IN, 0,
- PTL3_FN, PTL3_OUT, PTL3_IN, 0,
- PTL2_FN, PTL2_OUT, PTL2_IN, 0,
- PTL1_FN, PTL1_OUT, PTL1_IN, 0,
- PTL0_FN, PTL0_OUT, PTL0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PMCR", 0xffec0018, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, PTM7_IN, 0,
- PTM6_FN, PTM6_OUT, PTM6_IN, 0,
- PTM5_FN, PTM5_OUT, PTM5_IN, 0,
- PTM4_FN, PTM4_OUT, PTM4_IN, 0,
- PTM3_FN, PTM3_OUT, PTM3_IN, 0,
- PTM2_FN, PTM2_OUT, PTM2_IN, 0,
- PTM1_FN, PTM1_OUT, PTM1_IN, 0,
- PTM0_FN, PTM0_OUT, PTM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffec001a, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTN6_FN, PTN6_OUT, PTN6_IN, 0,
- PTN5_FN, PTN5_OUT, PTN5_IN, 0,
- PTN4_FN, PTN4_OUT, PTN4_IN, 0,
- PTN3_FN, PTN3_OUT, PTN3_IN, 0,
- PTN2_FN, PTN2_OUT, PTN2_IN, 0,
- PTN1_FN, PTN1_OUT, PTN1_IN, 0,
- PTN0_FN, PTN0_OUT, PTN0_IN, 0 ))
- },
- { PINMUX_CFG_REG("POCR", 0xffec001c, 16, 2, GROUP(
- PTO7_FN, PTO7_OUT, PTO7_IN, 0,
- PTO6_FN, PTO6_OUT, PTO6_IN, 0,
- PTO5_FN, PTO5_OUT, PTO5_IN, 0,
- PTO4_FN, PTO4_OUT, PTO4_IN, 0,
- PTO3_FN, PTO3_OUT, PTO3_IN, 0,
- PTO2_FN, PTO2_OUT, PTO2_IN, 0,
- PTO1_FN, PTO1_OUT, PTO1_IN, 0,
- PTO0_FN, PTO0_OUT, PTO0_IN, 0 ))
- },
-#if 0 /* FIXME: Remove it? */
- { PINMUX_CFG_REG("PPCR", 0xffec001e, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTP6_FN, PTP6_OUT, PTP6_IN, 0,
- PTP5_FN, PTP5_OUT, PTP5_IN, 0,
- PTP4_FN, PTP4_OUT, PTP4_IN, 0,
- PTP3_FN, PTP3_OUT, PTP3_IN, 0,
- PTP2_FN, PTP2_OUT, PTP2_IN, 0,
- PTP1_FN, PTP1_OUT, PTP1_IN, 0,
- PTP0_FN, PTP0_OUT, PTP0_IN, 0 ))
- },
-#endif
- { PINMUX_CFG_REG("PQCR", 0xffec0020, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTQ6_FN, PTQ6_OUT, PTQ6_IN, 0,
- PTQ5_FN, PTQ5_OUT, PTQ5_IN, 0,
- PTQ4_FN, PTQ4_OUT, PTQ4_IN, 0,
- PTQ3_FN, PTQ3_OUT, PTQ3_IN, 0,
- PTQ2_FN, PTQ2_OUT, PTQ2_IN, 0,
- PTQ1_FN, PTQ1_OUT, PTQ1_IN, 0,
- PTQ0_FN, PTQ0_OUT, PTQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PRCR", 0xffec0022, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, PTR7_IN, 0,
- PTR6_FN, PTR6_OUT, PTR6_IN, 0,
- PTR5_FN, PTR5_OUT, PTR5_IN, 0,
- PTR4_FN, PTR4_OUT, PTR4_IN, 0,
- PTR3_FN, PTR3_OUT, PTR3_IN, 0,
- PTR2_FN, PTR2_OUT, PTR2_IN, 0,
- PTR1_FN, PTR1_OUT, PTR1_IN, 0,
- PTR0_FN, PTR0_OUT, PTR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PSCR", 0xffec0024, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, PTS7_IN, 0,
- PTS6_FN, PTS6_OUT, PTS6_IN, 0,
- PTS5_FN, PTS5_OUT, PTS5_IN, 0,
- PTS4_FN, PTS4_OUT, PTS4_IN, 0,
- PTS3_FN, PTS3_OUT, PTS3_IN, 0,
- PTS2_FN, PTS2_OUT, PTS2_IN, 0,
- PTS1_FN, PTS1_OUT, PTS1_IN, 0,
- PTS0_FN, PTS0_OUT, PTS0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PTCR", 0xffec0026, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, PTT7_IN, 0,
- PTT6_FN, PTT6_OUT, PTT6_IN, 0,
- PTT5_FN, PTT5_OUT, PTT5_IN, 0,
- PTT4_FN, PTT4_OUT, PTT4_IN, 0,
- PTT3_FN, PTT3_OUT, PTT3_IN, 0,
- PTT2_FN, PTT2_OUT, PTT2_IN, 0,
- PTT1_FN, PTT1_OUT, PTT1_IN, 0,
- PTT0_FN, PTT0_OUT, PTT0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PUCR", 0xffec0028, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, PTU7_IN, 0,
- PTU6_FN, PTU6_OUT, PTU6_IN, 0,
- PTU5_FN, PTU5_OUT, PTU5_IN, 0,
- PTU4_FN, PTU4_OUT, PTU4_IN, 0,
- PTU3_FN, PTU3_OUT, PTU3_IN, 0,
- PTU2_FN, PTU2_OUT, PTU2_IN, 0,
- PTU1_FN, PTU1_OUT, PTU1_IN, 0,
- PTU0_FN, PTU0_OUT, PTU0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PVCR", 0xffec002a, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, PTV7_IN, 0,
- PTV6_FN, PTV6_OUT, PTV6_IN, 0,
- PTV5_FN, PTV5_OUT, PTV5_IN, 0,
- PTV4_FN, PTV4_OUT, PTV4_IN, 0,
- PTV3_FN, PTV3_OUT, PTV3_IN, 0,
- PTV2_FN, PTV2_OUT, PTV2_IN, 0,
- PTV1_FN, PTV1_OUT, PTV1_IN, 0,
- PTV0_FN, PTV0_OUT, PTV0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PWCR", 0xffec002c, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, PTW7_IN, 0,
- PTW6_FN, PTW6_OUT, PTW6_IN, 0,
- PTW5_FN, PTW5_OUT, PTW5_IN, 0,
- PTW4_FN, PTW4_OUT, PTW4_IN, 0,
- PTW3_FN, PTW3_OUT, PTW3_IN, 0,
- PTW2_FN, PTW2_OUT, PTW2_IN, 0,
- PTW1_FN, PTW1_OUT, PTW1_IN, 0,
- PTW0_FN, PTW0_OUT, PTW0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PXCR", 0xffec002e, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, PTX7_IN, 0,
- PTX6_FN, PTX6_OUT, PTX6_IN, 0,
- PTX5_FN, PTX5_OUT, PTX5_IN, 0,
- PTX4_FN, PTX4_OUT, PTX4_IN, 0,
- PTX3_FN, PTX3_OUT, PTX3_IN, 0,
- PTX2_FN, PTX2_OUT, PTX2_IN, 0,
- PTX1_FN, PTX1_OUT, PTX1_IN, 0,
- PTX0_FN, PTX0_OUT, PTX0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PYCR", 0xffec0030, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, PTY7_IN, 0,
- PTY6_FN, PTY6_OUT, PTY6_IN, 0,
- PTY5_FN, PTY5_OUT, PTY5_IN, 0,
- PTY4_FN, PTY4_OUT, PTY4_IN, 0,
- PTY3_FN, PTY3_OUT, PTY3_IN, 0,
- PTY2_FN, PTY2_OUT, PTY2_IN, 0,
- PTY1_FN, PTY1_OUT, PTY1_IN, 0,
- PTY0_FN, PTY0_OUT, PTY0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PZCR", 0xffec0032, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, PTZ7_IN, 0,
- PTZ6_FN, PTZ6_OUT, PTZ6_IN, 0,
- PTZ5_FN, PTZ5_OUT, PTZ5_IN, 0,
- PTZ4_FN, PTZ4_OUT, PTZ4_IN, 0,
- PTZ3_FN, PTZ3_OUT, PTZ3_IN, 0,
- PTZ2_FN, PTZ2_OUT, PTZ2_IN, 0,
- PTZ1_FN, PTZ1_OUT, PTZ1_IN, 0,
- PTZ0_FN, PTZ0_OUT, PTZ0_IN, 0 ))
- },
-
- { PINMUX_CFG_REG("PSEL0", 0xffec0070, 16, 1, GROUP(
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
- 0, 0,
- 0, 0, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL1", 0xffec0072, 16,
- GROUP(-5, 1, 1, 1, -5, 1, -2),
- GROUP(
- /* RESERVED [5] */
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- /* RESERVED [5] */
- PS1_2_FN1, PS1_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL2", 0xffec0074, 16,
- GROUP(-2, 1, 1, -4, 1, 1, 1, 1, -1, 1, -2),
- GROUP(
- /* RESERVED [2] */
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- /* RESERVED [4] */
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- /* RESERVED [1] */
- PS2_2_FN1, PS2_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL3", 0xffec0076, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, -4, 1, 1, -1),
- GROUP(
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- /* RESERVED [4] */
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
- /* RESERVED [1] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PSEL4", 0xffec0078, 16,
- GROUP(-1, 1, 1, 1, -1, 1, 1, 1, -3, 1, 1, 1,
- 1, 1),
- GROUP(
- /* RESERVED [1] */
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- /* RESERVED [1] */
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- /* RESERVED [3] */
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL5", 0xffec007a, 16,
- GROUP(-4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -2),
- GROUP(
- /* RESERVED [4] */
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG("PSEL6", 0xffec007c, 16, 1, GROUP(
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL7", 0xffec0082, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -5),
- GROUP(
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- /* RESERVED [5] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL8", 0xffec0084, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffec0034, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffec0036, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffec0038, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffec003a, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffec003c, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffec003e, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffec0040, 8, GROUP(
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffec0042, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PIDR", 0xffec0044, 8, GROUP(
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffec0046, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffec0048, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffec004a, 8, GROUP(
- 0, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffec004c, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffec004e, 8, GROUP(
- 0, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PODR", 0xffec0050, 8, GROUP(
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffec0052, 8, GROUP(
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffec0054, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffec0056, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xffec0058, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xffec005a, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xffec005c, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xffec005e, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xffec0060, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xffec0062, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xffec0064, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xffec0066, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7757_pinmux_info = {
- .name = "sh7757_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7785.c b/drivers/pinctrl/renesas/pfc-sh7785.c
deleted file mode 100644
index 126b663bb6eb3a..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7785.c
+++ /dev/null
@@ -1,1258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7785.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA,
- PM1_DATA, PM0_DATA,
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA,
- PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA,
- PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PL7_IN, PL6_IN, PL5_IN, PL4_IN,
- PL3_IN, PL2_IN, PL1_IN, PL0_IN,
- PM1_IN, PM0_IN,
- PN7_IN, PN6_IN, PN5_IN, PN4_IN,
- PN3_IN, PN2_IN, PN1_IN, PN0_IN,
- PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN,
- PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN,
- PR3_IN, PR2_IN, PR1_IN, PR0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT,
- PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT,
- PM1_OUT, PM0_OUT,
- PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT,
- PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT,
- PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT,
- PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT,
- PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN,
- PK7_FN, PK6_FN, PK5_FN, PK4_FN,
- PK3_FN, PK2_FN, PK1_FN, PK0_FN,
- PL7_FN, PL6_FN, PL5_FN, PL4_FN,
- PL3_FN, PL2_FN, PL1_FN, PL0_FN,
- PM1_FN, PM0_FN,
- PN7_FN, PN6_FN, PN5_FN, PN4_FN,
- PN3_FN, PN2_FN, PN1_FN, PN0_FN,
- PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN,
- PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN,
- PR3_FN, PR2_FN, PR1_FN, PR0_FN,
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D63_AD31_MARK,
- D62_AD30_MARK,
- D61_AD29_MARK,
- D60_AD28_MARK,
- D59_AD27_MARK,
- D58_AD26_MARK,
- D57_AD25_MARK,
- D56_AD24_MARK,
- D55_AD23_MARK,
- D54_AD22_MARK,
- D53_AD21_MARK,
- D52_AD20_MARK,
- D51_AD19_MARK,
- D50_AD18_MARK,
- D49_AD17_DB5_MARK,
- D48_AD16_DB4_MARK,
- D47_AD15_DB3_MARK,
- D46_AD14_DB2_MARK,
- D45_AD13_DB1_MARK,
- D44_AD12_DB0_MARK,
- D43_AD11_DG5_MARK,
- D42_AD10_DG4_MARK,
- D41_AD9_DG3_MARK,
- D40_AD8_DG2_MARK,
- D39_AD7_DG1_MARK,
- D38_AD6_DG0_MARK,
- D37_AD5_DR5_MARK,
- D36_AD4_DR4_MARK,
- D35_AD3_DR3_MARK,
- D34_AD2_DR2_MARK,
- D33_AD1_DR1_MARK,
- D32_AD0_DR0_MARK,
- REQ1_MARK,
- REQ2_MARK,
- REQ3_MARK,
- GNT1_MARK,
- GNT2_MARK,
- GNT3_MARK,
- MMCCLK_MARK,
- D31_MARK,
- D30_MARK,
- D29_MARK,
- D28_MARK,
- D27_MARK,
- D26_MARK,
- D25_MARK,
- D24_MARK,
- D23_MARK,
- D22_MARK,
- D21_MARK,
- D20_MARK,
- D19_MARK,
- D18_MARK,
- D17_MARK,
- D16_MARK,
- SCIF1_SCK_MARK,
- SCIF1_RXD_MARK,
- SCIF1_TXD_MARK,
- SCIF0_CTS_MARK,
- INTD_MARK,
- FCE_MARK,
- SCIF0_RTS_MARK,
- HSPI_CS_MARK,
- FSE_MARK,
- SCIF0_SCK_MARK,
- HSPI_CLK_MARK,
- FRE_MARK,
- SCIF0_RXD_MARK,
- HSPI_RX_MARK,
- FRB_MARK,
- SCIF0_TXD_MARK,
- HSPI_TX_MARK,
- FWE_MARK,
- SCIF5_TXD_MARK,
- HAC1_SYNC_MARK,
- SSI1_WS_MARK,
- SIOF_TXD_PJ_MARK,
- HAC0_SDOUT_MARK,
- SSI0_SDATA_MARK,
- SIOF_RXD_PJ_MARK,
- HAC0_SDIN_MARK,
- SSI0_SCK_MARK,
- SIOF_SYNC_PJ_MARK,
- HAC0_SYNC_MARK,
- SSI0_WS_MARK,
- SIOF_MCLK_PJ_MARK,
- HAC_RES_MARK,
- SIOF_SCK_PJ_MARK,
- HAC0_BITCLK_MARK,
- SSI0_CLK_MARK,
- HAC1_BITCLK_MARK,
- SSI1_CLK_MARK,
- TCLK_MARK,
- IOIS16_MARK,
- STATUS0_MARK,
- DRAK0_PK3_MARK,
- STATUS1_MARK,
- DRAK1_PK2_MARK,
- DACK2_MARK,
- SCIF2_TXD_MARK,
- MMCCMD_MARK,
- SIOF_TXD_PK_MARK,
- DACK3_MARK,
- SCIF2_SCK_MARK,
- MMCDAT_MARK,
- SIOF_SCK_PK_MARK,
- DREQ0_MARK,
- DREQ1_MARK,
- DRAK0_PK1_MARK,
- DRAK1_PK0_MARK,
- DREQ2_MARK,
- INTB_MARK,
- DREQ3_MARK,
- INTC_MARK,
- DRAK2_MARK,
- CE2A_MARK,
- IRL4_MARK,
- FD4_MARK,
- IRL5_MARK,
- FD5_MARK,
- IRL6_MARK,
- FD6_MARK,
- IRL7_MARK,
- FD7_MARK,
- DRAK3_MARK,
- CE2B_MARK,
- BREQ_BSACK_MARK,
- BACK_BSREQ_MARK,
- SCIF5_RXD_MARK,
- HAC1_SDIN_MARK,
- SSI1_SCK_MARK,
- SCIF5_SCK_MARK,
- HAC1_SDOUT_MARK,
- SSI1_SDATA_MARK,
- SCIF3_TXD_MARK,
- FCLE_MARK,
- SCIF3_RXD_MARK,
- FALE_MARK,
- SCIF3_SCK_MARK,
- FD0_MARK,
- SCIF4_TXD_MARK,
- FD1_MARK,
- SCIF4_RXD_MARK,
- FD2_MARK,
- SCIF4_SCK_MARK,
- FD3_MARK,
- DEVSEL_DCLKOUT_MARK,
- STOP_CDE_MARK,
- LOCK_ODDF_MARK,
- TRDY_DISPL_MARK,
- IRDY_HSYNC_MARK,
- PCIFRAME_VSYNC_MARK,
- INTA_MARK,
- GNT0_GNTIN_MARK,
- REQ0_REQOUT_MARK,
- PERR_MARK,
- SERR_MARK,
- WE7_CBE3_MARK,
- WE6_CBE2_MARK,
- WE5_CBE1_MARK,
- WE4_CBE0_MARK,
- SCIF2_RXD_MARK,
- SIOF_RXD_MARK,
- MRESETOUT_MARK,
- IRQOUT_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
- PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT),
-
- /* PK GPIO */
- PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT),
- PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT),
- PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT),
- PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT),
- PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT),
- PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT),
- PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT),
- PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT),
-
- /* PL GPIO */
- PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT),
- PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT),
- PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT),
- PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT),
- PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT),
- PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT),
- PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT),
- PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT),
-
- /* PM GPIO */
- PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT),
- PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT),
-
- /* PN GPIO */
- PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT),
- PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT),
- PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT),
- PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT),
- PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT),
- PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT),
- PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT),
- PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT),
-
- /* PP GPIO */
- PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT),
- PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT),
- PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT),
- PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT),
- PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT),
- PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT),
-
- /* PQ GPIO */
- PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT),
- PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT),
- PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT),
- PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT),
- PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT),
-
- /* PR GPIO */
- PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT),
- PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT),
- PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT),
- PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D63_AD31_MARK, PA7_FN),
- PINMUX_DATA(D62_AD30_MARK, PA6_FN),
- PINMUX_DATA(D61_AD29_MARK, PA5_FN),
- PINMUX_DATA(D60_AD28_MARK, PA4_FN),
- PINMUX_DATA(D59_AD27_MARK, PA3_FN),
- PINMUX_DATA(D58_AD26_MARK, PA2_FN),
- PINMUX_DATA(D57_AD25_MARK, PA1_FN),
- PINMUX_DATA(D56_AD24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D55_AD23_MARK, PB7_FN),
- PINMUX_DATA(D54_AD22_MARK, PB6_FN),
- PINMUX_DATA(D53_AD21_MARK, PB5_FN),
- PINMUX_DATA(D52_AD20_MARK, PB4_FN),
- PINMUX_DATA(D51_AD19_MARK, PB3_FN),
- PINMUX_DATA(D50_AD18_MARK, PB2_FN),
- PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN),
- PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN),
- PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN),
- PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN),
- PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN),
- PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN),
- PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN),
- PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN),
- PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN),
- PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN),
- PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN),
- PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN),
- PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN),
- PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN),
- PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN),
- PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(REQ1_MARK, PE5_FN),
- PINMUX_DATA(REQ2_MARK, PE4_FN),
- PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN),
- PINMUX_DATA(GNT1_MARK, PE2_FN),
- PINMUX_DATA(GNT2_MARK, PE1_FN),
- PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN),
- PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(D31_MARK, PF7_FN),
- PINMUX_DATA(D30_MARK, PF6_FN),
- PINMUX_DATA(D29_MARK, PF5_FN),
- PINMUX_DATA(D28_MARK, PF4_FN),
- PINMUX_DATA(D27_MARK, PF3_FN),
- PINMUX_DATA(D26_MARK, PF2_FN),
- PINMUX_DATA(D25_MARK, PF1_FN),
- PINMUX_DATA(D24_MARK, PF0_FN),
-
- /* PF FN */
- PINMUX_DATA(D23_MARK, PG7_FN),
- PINMUX_DATA(D22_MARK, PG6_FN),
- PINMUX_DATA(D21_MARK, PG5_FN),
- PINMUX_DATA(D20_MARK, PG4_FN),
- PINMUX_DATA(D19_MARK, PG3_FN),
- PINMUX_DATA(D18_MARK, PG2_FN),
- PINMUX_DATA(D17_MARK, PG1_FN),
- PINMUX_DATA(D16_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN),
- PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN),
- PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN),
- PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN),
- PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN),
- PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN),
- PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN),
- PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN),
- PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN),
- PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN),
- PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN),
-
- /* PK FN */
- PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN),
- PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN),
- PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN),
- PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN),
- PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(DREQ0_MARK, PK3_FN),
- PINMUX_DATA(DREQ1_MARK, PK2_FN),
- PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN),
- PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN),
-
- /* PL FN */
- PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN),
- PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN),
- PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN),
- PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN),
- PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN),
- PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN),
- PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN),
- PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN),
- PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN),
- PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN),
- PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN),
- PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN),
- PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN),
- PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN),
- PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN),
- PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN),
-
- /* PM FN */
- PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN),
- PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN),
-
- /* PN FN */
- PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN),
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN),
- PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN),
- PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN),
- PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN),
- PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN),
-
- /* PP FN */
- PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN),
- PINMUX_DATA(STOP_CDE_MARK, PP4_FN),
- PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN),
- PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN),
- PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN),
- PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN),
-
- /* PQ FN */
- PINMUX_DATA(INTA_MARK, PQ4_FN),
- PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN),
- PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN),
- PINMUX_DATA(PERR_MARK, PQ1_FN),
- PINMUX_DATA(SERR_MARK, PQ0_FN),
-
- /* PR FN */
- PINMUX_DATA(WE7_CBE3_MARK, PR3_FN),
- PINMUX_DATA(WE6_CBE2_MARK, PR2_FN),
- PINMUX_DATA(WE5_CBE1_MARK, PR1_FN),
- PINMUX_DATA(WE4_CBE0_MARK, PR0_FN),
-
- /* MISC FN */
- PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0),
- PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0),
- PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0),
- PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* PK */
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-
- /* PL */
- PINMUX_GPIO(PL7),
- PINMUX_GPIO(PL6),
- PINMUX_GPIO(PL5),
- PINMUX_GPIO(PL4),
- PINMUX_GPIO(PL3),
- PINMUX_GPIO(PL2),
- PINMUX_GPIO(PL1),
- PINMUX_GPIO(PL0),
-
- /* PM */
- PINMUX_GPIO(PM1),
- PINMUX_GPIO(PM0),
-
- /* PN */
- PINMUX_GPIO(PN7),
- PINMUX_GPIO(PN6),
- PINMUX_GPIO(PN5),
- PINMUX_GPIO(PN4),
- PINMUX_GPIO(PN3),
- PINMUX_GPIO(PN2),
- PINMUX_GPIO(PN1),
- PINMUX_GPIO(PN0),
-
- /* PP */
- PINMUX_GPIO(PP5),
- PINMUX_GPIO(PP4),
- PINMUX_GPIO(PP3),
- PINMUX_GPIO(PP2),
- PINMUX_GPIO(PP1),
- PINMUX_GPIO(PP0),
-
- /* PQ */
- PINMUX_GPIO(PQ4),
- PINMUX_GPIO(PQ3),
- PINMUX_GPIO(PQ2),
- PINMUX_GPIO(PQ1),
- PINMUX_GPIO(PQ0),
-
- /* PR */
- PINMUX_GPIO(PR3),
- PINMUX_GPIO(PR2),
- PINMUX_GPIO(PR1),
- PINMUX_GPIO(PR0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D63_AD31),
- GPIO_FN(D62_AD30),
- GPIO_FN(D61_AD29),
- GPIO_FN(D60_AD28),
- GPIO_FN(D59_AD27),
- GPIO_FN(D58_AD26),
- GPIO_FN(D57_AD25),
- GPIO_FN(D56_AD24),
- GPIO_FN(D55_AD23),
- GPIO_FN(D54_AD22),
- GPIO_FN(D53_AD21),
- GPIO_FN(D52_AD20),
- GPIO_FN(D51_AD19),
- GPIO_FN(D50_AD18),
- GPIO_FN(D49_AD17_DB5),
- GPIO_FN(D48_AD16_DB4),
- GPIO_FN(D47_AD15_DB3),
- GPIO_FN(D46_AD14_DB2),
- GPIO_FN(D45_AD13_DB1),
- GPIO_FN(D44_AD12_DB0),
- GPIO_FN(D43_AD11_DG5),
- GPIO_FN(D42_AD10_DG4),
- GPIO_FN(D41_AD9_DG3),
- GPIO_FN(D40_AD8_DG2),
- GPIO_FN(D39_AD7_DG1),
- GPIO_FN(D38_AD6_DG0),
- GPIO_FN(D37_AD5_DR5),
- GPIO_FN(D36_AD4_DR4),
- GPIO_FN(D35_AD3_DR3),
- GPIO_FN(D34_AD2_DR2),
- GPIO_FN(D33_AD1_DR1),
- GPIO_FN(D32_AD0_DR0),
- GPIO_FN(REQ1),
- GPIO_FN(REQ2),
- GPIO_FN(REQ3),
- GPIO_FN(GNT1),
- GPIO_FN(GNT2),
- GPIO_FN(GNT3),
- GPIO_FN(MMCCLK),
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(INTD),
- GPIO_FN(FCE),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(HSPI_CS),
- GPIO_FN(FSE),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(FRE),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(HSPI_RX),
- GPIO_FN(FRB),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(HSPI_TX),
- GPIO_FN(FWE),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SIOF_TXD_PJ),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SIOF_RXD_PJ),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SIOF_SYNC_PJ),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SIOF_MCLK_PJ),
- GPIO_FN(HAC_RES),
- GPIO_FN(SIOF_SCK_PJ),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(TCLK),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS0),
- GPIO_FN(DRAK0_PK3),
- GPIO_FN(STATUS1),
- GPIO_FN(DRAK1_PK2),
- GPIO_FN(DACK2),
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(MMCCMD),
- GPIO_FN(SIOF_TXD_PK),
- GPIO_FN(DACK3),
- GPIO_FN(SCIF2_SCK),
- GPIO_FN(MMCDAT),
- GPIO_FN(SIOF_SCK_PK),
- GPIO_FN(DREQ0),
- GPIO_FN(DREQ1),
- GPIO_FN(DRAK0_PK1),
- GPIO_FN(DRAK1_PK0),
- GPIO_FN(DREQ2),
- GPIO_FN(INTB),
- GPIO_FN(DREQ3),
- GPIO_FN(INTC),
- GPIO_FN(DRAK2),
- GPIO_FN(CE2A),
- GPIO_FN(IRL4),
- GPIO_FN(FD4),
- GPIO_FN(IRL5),
- GPIO_FN(FD5),
- GPIO_FN(IRL6),
- GPIO_FN(FD6),
- GPIO_FN(IRL7),
- GPIO_FN(FD7),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2B),
- GPIO_FN(BREQ_BSACK),
- GPIO_FN(BACK_BSREQ),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(FCLE),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(FALE),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(FD0),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(FD1),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(FD2),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(FD3),
- GPIO_FN(DEVSEL_DCLKOUT),
- GPIO_FN(STOP_CDE),
- GPIO_FN(LOCK_ODDF),
- GPIO_FN(TRDY_DISPL),
- GPIO_FN(IRDY_HSYNC),
- GPIO_FN(PCIFRAME_VSYNC),
- GPIO_FN(INTA),
- GPIO_FN(GNT0_GNTIN),
- GPIO_FN(REQ0_REQOUT),
- GPIO_FN(PERR),
- GPIO_FN(SERR),
- GPIO_FN(WE7_CBE3),
- GPIO_FN(WE6_CBE2),
- GPIO_FN(WE5_CBE1),
- GPIO_FN(WE4_CBE0),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SIOF_RXD),
- GPIO_FN(MRESETOUT),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffe70008, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- PJ0_FN, PJ0_OUT, PJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2, GROUP(
- PK7_FN, PK7_OUT, PK7_IN, 0,
- PK6_FN, PK6_OUT, PK6_IN, 0,
- PK5_FN, PK5_OUT, PK5_IN, 0,
- PK4_FN, PK4_OUT, PK4_IN, 0,
- PK3_FN, PK3_OUT, PK3_IN, 0,
- PK2_FN, PK2_OUT, PK2_IN, 0,
- PK1_FN, PK1_OUT, PK1_IN, 0,
- PK0_FN, PK0_OUT, PK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2, GROUP(
- PL7_FN, PL7_OUT, PL7_IN, 0,
- PL6_FN, PL6_OUT, PL6_IN, 0,
- PL5_FN, PL5_OUT, PL5_IN, 0,
- PL4_FN, PL4_OUT, PL4_IN, 0,
- PL3_FN, PL3_OUT, PL3_IN, 0,
- PL2_FN, PL2_OUT, PL2_IN, 0,
- PL1_FN, PL1_OUT, PL1_IN, 0,
- PL0_FN, PL0_OUT, PL0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PMCR", 0xffe70016, 16,
- GROUP(-12, 2, 2),
- GROUP(
- /* RESERVED [12] */
- PM1_FN, PM1_OUT, PM1_IN, 0,
- PM0_FN, PM0_OUT, PM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2, GROUP(
- PN7_FN, PN7_OUT, PN7_IN, 0,
- PN6_FN, PN6_OUT, PN6_IN, 0,
- PN5_FN, PN5_OUT, PN5_IN, 0,
- PN4_FN, PN4_OUT, PN4_IN, 0,
- PN3_FN, PN3_OUT, PN3_IN, 0,
- PN2_FN, PN2_OUT, PN2_IN, 0,
- PN1_FN, PN1_OUT, PN1_IN, 0,
- PN0_FN, PN0_OUT, PN0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xffe7001a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PP5_FN, PP5_OUT, PP5_IN, 0,
- PP4_FN, PP4_OUT, PP4_IN, 0,
- PP3_FN, PP3_OUT, PP3_IN, 0,
- PP2_FN, PP2_OUT, PP2_IN, 0,
- PP1_FN, PP1_OUT, PP1_IN, 0,
- PP0_FN, PP0_OUT, PP0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xffe7001c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PQ4_FN, PQ4_OUT, PQ4_IN, 0,
- PQ3_FN, PQ3_OUT, PQ3_IN, 0,
- PQ2_FN, PQ2_OUT, PQ2_IN, 0,
- PQ1_FN, PQ1_OUT, PQ1_IN, 0,
- PQ0_FN, PQ0_OUT, PQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xffe7001e, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PR3_FN, PR3_OUT, PR3_IN, 0,
- PR2_FN, PR2_OUT, PR2_IN, 0,
- PR1_FN, PR1_OUT, PR1_IN, 0,
- PR0_FN, PR0_OUT, PR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1, GROUP(
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, 0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG_VAR("P2MSELR", 0xffe70082, 16,
- GROUP(-13, 1, 1, 1),
- GROUP(
- /* RESERVED [13] */
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffe70020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffe70022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffe70024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffe70026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffe70028, 8, GROUP(
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffe7002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffe7002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffe7002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffe70030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffe70032, 8, GROUP(
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffe70034, 8, GROUP(
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffe70036, 8, GROUP(
- 0, 0, 0, 0,
- 0, 0, PM1_DATA, PM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffe70038, 8, GROUP(
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffe7003a, 8, GROUP(
- 0, 0, PP5_DATA, PP4_DATA,
- PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffe7003c, 8, GROUP(
- 0, 0, 0, PQ4_DATA,
- PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffe7003e, 8, GROUP(
- 0, 0, 0, 0,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7785_pinmux_info = {
- .name = "sh7785_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7786.c b/drivers/pinctrl/renesas/pfc-sh7786.c
deleted file mode 100644
index f09f4a76901088..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7786.c
+++ /dev/null
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7786.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
-
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- DCLKIN_MARK, DCLKOUT_MARK, ODDF_MARK,
- VSYNC_MARK, HSYNC_MARK, CDE_MARK, DISP_MARK,
- DR0_MARK, DR1_MARK, DR2_MARK, DR3_MARK, DR4_MARK, DR5_MARK,
- DG0_MARK, DG1_MARK, DG2_MARK, DG3_MARK, DG4_MARK, DG5_MARK,
- DB0_MARK, DB1_MARK, DB2_MARK, DB3_MARK, DB4_MARK, DB5_MARK,
- ETH_MAGIC_MARK, ETH_LINK_MARK, ETH_TX_ER_MARK, ETH_TX_EN_MARK,
- ETH_MDIO_MARK, ETH_RX_CLK_MARK, ETH_MDC_MARK, ETH_COL_MARK,
- ETH_TX_CLK_MARK, ETH_CRS_MARK, ETH_RX_DV_MARK, ETH_RX_ER_MARK,
- ETH_TXD3_MARK, ETH_TXD2_MARK, ETH_TXD1_MARK, ETH_TXD0_MARK,
- ETH_RXD3_MARK, ETH_RXD2_MARK, ETH_RXD1_MARK, ETH_RXD0_MARK,
- HSPI_CLK_MARK, HSPI_CS_MARK, HSPI_RX_MARK, HSPI_TX_MARK,
- SCIF0_CTS_MARK, SCIF0_RTS_MARK,
- SCIF0_SCK_MARK, SCIF0_RXD_MARK, SCIF0_TXD_MARK,
- SCIF1_SCK_MARK, SCIF1_RXD_MARK, SCIF1_TXD_MARK,
- SCIF3_SCK_MARK, SCIF3_RXD_MARK, SCIF3_TXD_MARK,
- SCIF4_SCK_MARK, SCIF4_RXD_MARK, SCIF4_TXD_MARK,
- SCIF5_SCK_MARK, SCIF5_RXD_MARK, SCIF5_TXD_MARK,
- BREQ_MARK, IOIS16_MARK, CE2B_MARK, CE2A_MARK, BACK_MARK,
- FALE_MARK, FRB_MARK, FSTATUS_MARK,
- FSE_MARK, FCLE_MARK,
- DACK0_MARK, DACK1_MARK, DACK2_MARK, DACK3_MARK,
- DREQ0_MARK, DREQ1_MARK, DREQ2_MARK, DREQ3_MARK,
- DRAK0_MARK, DRAK1_MARK, DRAK2_MARK, DRAK3_MARK,
- USB_OVC1_MARK, USB_OVC0_MARK,
- USB_PENC1_MARK, USB_PENC0_MARK,
- HAC_RES_MARK,
- HAC1_SDOUT_MARK, HAC1_SDIN_MARK, HAC1_SYNC_MARK, HAC1_BITCLK_MARK,
- HAC0_SDOUT_MARK, HAC0_SDIN_MARK, HAC0_SYNC_MARK, HAC0_BITCLK_MARK,
- SSI0_SDATA_MARK, SSI0_SCK_MARK, SSI0_WS_MARK, SSI0_CLK_MARK,
- SSI1_SDATA_MARK, SSI1_SCK_MARK, SSI1_WS_MARK, SSI1_CLK_MARK,
- SSI2_SDATA_MARK, SSI2_SCK_MARK, SSI2_WS_MARK,
- SSI3_SDATA_MARK, SSI3_SCK_MARK, SSI3_WS_MARK,
- SDIF1CMD_MARK, SDIF1CD_MARK, SDIF1WP_MARK, SDIF1CLK_MARK,
- SDIF1D3_MARK, SDIF1D2_MARK, SDIF1D1_MARK, SDIF1D0_MARK,
- SDIF0CMD_MARK, SDIF0CD_MARK, SDIF0WP_MARK, SDIF0CLK_MARK,
- SDIF0D3_MARK, SDIF0D2_MARK, SDIF0D1_MARK, SDIF0D0_MARK,
- TCLK_MARK,
- IRL7_MARK, IRL6_MARK, IRL5_MARK, IRL4_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
-
- /* PA FN */
- PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN),
- PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN),
- PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN),
- PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN),
- PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN),
- PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN),
- PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN),
- PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN),
- PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN),
- PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN),
- PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN),
- PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN),
- PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN),
- PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN),
- PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN),
- PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN),
- PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN),
- PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN),
- PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN),
- PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN),
- PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN),
- PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN),
- PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN),
- PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN),
- PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN),
- PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN),
- PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN),
- PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN),
- PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN),
- PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN),
- PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN),
- PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN),
- PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN),
- PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN),
- PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN),
- PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN),
-
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN),
- PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN),
- PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN),
- PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN),
- PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN),
- PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN),
- PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DCLKOUT_MARK, PD7_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PD6_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN),
- PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN),
- PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN),
- PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(USB_PENC1_MARK, PE7_FN),
- PINMUX_DATA(USB_PENC0_MARK, PE6_FN),
-
- /* PF FN */
- PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN),
- PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN),
- PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN),
- PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN),
- PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN),
-
- /* PH FN */
- PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN),
- PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN),
- PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN),
- PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN),
- PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN),
- PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN),
- PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN),
- PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN),
- PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN),
- PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN),
- PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN),
- PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN),
- PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN),
- PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN),
- PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN),
- PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN),
- PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN),
- PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(CDE),
- GPIO_FN(ETH_MAGIC),
- GPIO_FN(DISP),
- GPIO_FN(ETH_LINK),
- GPIO_FN(DR5),
- GPIO_FN(ETH_TX_ER),
- GPIO_FN(DR4),
- GPIO_FN(ETH_TX_EN),
- GPIO_FN(DR3),
- GPIO_FN(ETH_TXD3),
- GPIO_FN(DR2),
- GPIO_FN(ETH_TXD2),
- GPIO_FN(DR1),
- GPIO_FN(ETH_TXD1),
- GPIO_FN(DR0),
- GPIO_FN(ETH_TXD0),
- GPIO_FN(VSYNC),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(ODDF),
- GPIO_FN(HSPI_CS),
- GPIO_FN(DG5),
- GPIO_FN(ETH_MDIO),
- GPIO_FN(DG4),
- GPIO_FN(ETH_RX_CLK),
- GPIO_FN(DG3),
- GPIO_FN(ETH_MDC),
- GPIO_FN(DG2),
- GPIO_FN(ETH_COL),
- GPIO_FN(DG1),
- GPIO_FN(ETH_TX_CLK),
- GPIO_FN(DG0),
- GPIO_FN(ETH_CRS),
- GPIO_FN(DCLKIN),
- GPIO_FN(HSPI_RX),
- GPIO_FN(HSYNC),
- GPIO_FN(HSPI_TX),
- GPIO_FN(DB5),
- GPIO_FN(ETH_RXD3),
- GPIO_FN(DB4),
- GPIO_FN(ETH_RXD2),
- GPIO_FN(DB3),
- GPIO_FN(ETH_RXD1),
- GPIO_FN(DB2),
- GPIO_FN(ETH_RXD0),
- GPIO_FN(DB1),
- GPIO_FN(ETH_RX_DV),
- GPIO_FN(DB0),
- GPIO_FN(ETH_RX_ER),
- GPIO_FN(DCLKOUT),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(DACK1),
- GPIO_FN(BACK),
- GPIO_FN(FALE),
- GPIO_FN(DACK0),
- GPIO_FN(FCLE),
- GPIO_FN(DREQ1),
- GPIO_FN(BREQ),
- GPIO_FN(USB_OVC1),
- GPIO_FN(DREQ0),
- GPIO_FN(USB_OVC0),
- GPIO_FN(USB_PENC1),
- GPIO_FN(USB_PENC0),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SDIF1CMD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SDIF1CD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SDIF1WP),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(SDIF1CLK),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SDIF1D3),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SDIF1D2),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SDIF1D1),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(SDIF1D0),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(SSI2_SDATA),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(TCLK),
- GPIO_FN(SSI2_SCK),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(HAC_RES),
- GPIO_FN(SSI2_WS),
- GPIO_FN(DACK3),
- GPIO_FN(SDIF0CMD),
- GPIO_FN(DACK2),
- GPIO_FN(SDIF0CD),
- GPIO_FN(DREQ3),
- GPIO_FN(SDIF0WP),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(DREQ2),
- GPIO_FN(SDIF0CLK),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(IRL7),
- GPIO_FN(SDIF0D3),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(IRL6),
- GPIO_FN(SDIF0D2),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(IRL5),
- GPIO_FN(SDIF0D1),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(IRL4),
- GPIO_FN(SDIF0D0),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(FRB),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(IOIS16),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(CE2B),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2A),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(DRAK2),
- GPIO_FN(SSI3_WS),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(DRAK1),
- GPIO_FN(SSI3_SDATA),
- GPIO_FN(FSTATUS),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(DRAK0),
- GPIO_FN(SSI3_SCK),
- GPIO_FN(FSE),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffcc0008, 16,
- GROUP(2, 2, -12),
- GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- /* RESERVED [12] */ ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xffcc000c, 16,
- GROUP(2, 2, 2, -10),
- GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- /* RESERVED [10] */ ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1, GROUP(
- 0, 0,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1, GROUP(
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffcc0020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8, GROUP(
- PE7_DATA, PE6_DATA,
- 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, 0,
- 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7786_pinmux_info = {
- .name = "sh7786_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-shx3.c b/drivers/pinctrl/renesas/pfc-shx3.c
deleted file mode 100644
index 96a65d83774f16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-shx3.c
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <cpu/shx3.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
-
- PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
-
- PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
-
- PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN, PE5_FN, PE4_FN,
- PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
-
- PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK, D27_MARK, D26_MARK,
- D25_MARK, D24_MARK, D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
-
- BACK_MARK, BREQ_MARK,
- WE3_MARK, WE2_MARK,
- CS6_MARK, CS5_MARK, CS4_MARK,
- CLKOUTENB_MARK,
-
- DACK3_MARK, DACK2_MARK, DACK1_MARK, DACK0_MARK,
- DREQ3_MARK, DREQ2_MARK, DREQ1_MARK, DREQ0_MARK,
-
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
-
- DRAK3_MARK, DRAK2_MARK, DRAK1_MARK, DRAK0_MARK,
-
- SCK3_MARK, SCK2_MARK, SCK1_MARK, SCK0_MARK,
- IRL3_MARK, IRL2_MARK, IRL1_MARK, IRL0_MARK,
- TXD3_MARK, TXD2_MARK, TXD1_MARK, TXD0_MARK,
- RXD3_MARK, RXD2_MARK, RXD1_MARK, RXD0_MARK,
-
- CE2B_MARK, CE2A_MARK, IOIS16_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- IRQOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D31_MARK, PA7_FN),
- PINMUX_DATA(D30_MARK, PA6_FN),
- PINMUX_DATA(D29_MARK, PA5_FN),
- PINMUX_DATA(D28_MARK, PA4_FN),
- PINMUX_DATA(D27_MARK, PA3_FN),
- PINMUX_DATA(D26_MARK, PA2_FN),
- PINMUX_DATA(D25_MARK, PA1_FN),
- PINMUX_DATA(D24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D23_MARK, PB7_FN),
- PINMUX_DATA(D22_MARK, PB6_FN),
- PINMUX_DATA(D21_MARK, PB5_FN),
- PINMUX_DATA(D20_MARK, PB4_FN),
- PINMUX_DATA(D19_MARK, PB3_FN),
- PINMUX_DATA(D18_MARK, PB2_FN),
- PINMUX_DATA(D17_MARK, PB1_FN),
- PINMUX_DATA(D16_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(BACK_MARK, PC7_FN),
- PINMUX_DATA(BREQ_MARK, PC6_FN),
- PINMUX_DATA(WE3_MARK, PC5_FN),
- PINMUX_DATA(WE2_MARK, PC4_FN),
- PINMUX_DATA(CS6_MARK, PC3_FN),
- PINMUX_DATA(CS5_MARK, PC2_FN),
- PINMUX_DATA(CS4_MARK, PC1_FN),
- PINMUX_DATA(CLKOUTENB_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DACK3_MARK, PD7_FN),
- PINMUX_DATA(DACK2_MARK, PD6_FN),
- PINMUX_DATA(DACK1_MARK, PD5_FN),
- PINMUX_DATA(DACK0_MARK, PD4_FN),
- PINMUX_DATA(DREQ3_MARK, PD3_FN),
- PINMUX_DATA(DREQ2_MARK, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(IRQ3_MARK, PE7_FN),
- PINMUX_DATA(IRQ2_MARK, PE6_FN),
- PINMUX_DATA(IRQ1_MARK, PE5_FN),
- PINMUX_DATA(IRQ0_MARK, PE4_FN),
- PINMUX_DATA(DRAK3_MARK, PE3_FN),
- PINMUX_DATA(DRAK2_MARK, PE2_FN),
- PINMUX_DATA(DRAK1_MARK, PE1_FN),
- PINMUX_DATA(DRAK0_MARK, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(SCK3_MARK, PF7_FN),
- PINMUX_DATA(SCK2_MARK, PF6_FN),
- PINMUX_DATA(SCK1_MARK, PF5_FN),
- PINMUX_DATA(SCK0_MARK, PF4_FN),
- PINMUX_DATA(IRL3_MARK, PF3_FN),
- PINMUX_DATA(IRL2_MARK, PF2_FN),
- PINMUX_DATA(IRL1_MARK, PF1_FN),
- PINMUX_DATA(IRL0_MARK, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(TXD3_MARK, PG7_FN),
- PINMUX_DATA(TXD2_MARK, PG6_FN),
- PINMUX_DATA(TXD1_MARK, PG5_FN),
- PINMUX_DATA(TXD0_MARK, PG4_FN),
- PINMUX_DATA(RXD3_MARK, PG3_FN),
- PINMUX_DATA(RXD2_MARK, PG2_FN),
- PINMUX_DATA(RXD1_MARK, PG1_FN),
- PINMUX_DATA(RXD0_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(CE2B_MARK, PH5_FN),
- PINMUX_DATA(CE2A_MARK, PH4_FN),
- PINMUX_DATA(IOIS16_MARK, PH3_FN),
- PINMUX_DATA(STATUS1_MARK, PH2_FN),
- PINMUX_DATA(STATUS0_MARK, PH1_FN),
- PINMUX_DATA(IRQOUT_MARK, PH0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(BACK),
- GPIO_FN(BREQ),
- GPIO_FN(WE3),
- GPIO_FN(WE2),
- GPIO_FN(CS6),
- GPIO_FN(CS5),
- GPIO_FN(CS4),
- GPIO_FN(CLKOUTENB),
- GPIO_FN(DACK3),
- GPIO_FN(DACK2),
- GPIO_FN(DACK1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ3),
- GPIO_FN(DREQ2),
- GPIO_FN(DREQ1),
- GPIO_FN(DREQ0),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(DRAK3),
- GPIO_FN(DRAK2),
- GPIO_FN(DRAK1),
- GPIO_FN(DRAK0),
- GPIO_FN(SCK3),
- GPIO_FN(SCK2),
- GPIO_FN(SCK1),
- GPIO_FN(SCK0),
- GPIO_FN(IRL3),
- GPIO_FN(IRL2),
- GPIO_FN(IRL1),
- GPIO_FN(IRL0),
- GPIO_FN(TXD3),
- GPIO_FN(TXD2),
- GPIO_FN(TXD1),
- GPIO_FN(TXD0),
- GPIO_FN(RXD3),
- GPIO_FN(RXD2),
- GPIO_FN(RXD1),
- GPIO_FN(RXD0),
- GPIO_FN(CE2B),
- GPIO_FN(CE2A),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PABCR", 0xffc70000, 32, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0,
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PCDCR", 0xffc70004, 32, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0,
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PEFCR", 0xffc70008, 32, 2, GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0,
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PGHCR", 0xffc7000c, 32, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0, ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PABDR", 0xffc70010, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, ))
- },
- { PINMUX_DATA_REG("PCDDR", 0xffc70014, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, ))
- },
- { PINMUX_DATA_REG("PEFDR", 0xffc70018, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, ))
- },
- { PINMUX_DATA_REG("PGHDR", 0xffc7001c, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info shx3_pinmux_info = {
- .name = "shx3_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-};
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 13/22] pinctrl: remove renesas sh controllers
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/pinctrl/renesas/Kconfig | 63 +-
drivers/pinctrl/renesas/Makefile | 27 -
drivers/pinctrl/renesas/core.c | 598 ------
drivers/pinctrl/renesas/pfc-sh7203.c | 1577 --------------
drivers/pinctrl/renesas/pfc-sh7264.c | 2131 -------------------
drivers/pinctrl/renesas/pfc-sh7269.c | 2851 --------------------------
drivers/pinctrl/renesas/pfc-sh7720.c | 1201 -----------
drivers/pinctrl/renesas/pfc-sh7722.c | 1703 ---------------
drivers/pinctrl/renesas/pfc-sh7723.c | 1902 -----------------
drivers/pinctrl/renesas/pfc-sh7724.c | 2177 --------------------
drivers/pinctrl/renesas/pfc-sh7734.c | 2408 ----------------------
drivers/pinctrl/renesas/pfc-sh7757.c | 2219 --------------------
drivers/pinctrl/renesas/pfc-sh7785.c | 1258 ------------
drivers/pinctrl/renesas/pfc-sh7786.c | 809 --------
drivers/pinctrl/renesas/pfc-shx3.c | 557 -----
15 files changed, 2 insertions(+), 21479 deletions(-)
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7203.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7264.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7269.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7720.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7722.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7723.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7724.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7734.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7757.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7785.c
delete mode 100644 drivers/pinctrl/renesas/pfc-sh7786.c
delete mode 100644 drivers/pinctrl/renesas/pfc-shx3.c
diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 0903a0a4183198..fe4475c51920cd 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -6,8 +6,8 @@
menu "Renesas pinctrl drivers"
config PINCTRL_RENESAS
- bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
- default y if ARCH_RENESAS || SUPERH
+ bool "Renesas SoC pin control support" if COMPILE_TEST && ARCH_RENESAS
+ default y if ARCH_RENESAS
select PINCTRL_PFC_EMEV2 if ARCH_EMEV2
select PINCTRL_PFC_R8A73A4 if ARCH_R8A73A4
select PINCTRL_PFC_R8A7740 if ARCH_R8A7740
@@ -41,19 +41,7 @@ config PINCTRL_RENESAS
select PINCTRL_PFC_R8A779G0 if ARCH_R8A779G0
select PINCTRL_RZG2L if ARCH_RZG2L
select PINCTRL_RZV2M if ARCH_R9A09G011
- select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203
- select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264
- select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
select PINCTRL_PFC_SH73A0 if ARCH_SH73A0
- select PINCTRL_PFC_SH7720 if CPU_SUBTYPE_SH7720
- select PINCTRL_PFC_SH7722 if CPU_SUBTYPE_SH7722
- select PINCTRL_PFC_SH7723 if CPU_SUBTYPE_SH7723
- select PINCTRL_PFC_SH7724 if CPU_SUBTYPE_SH7724
- select PINCTRL_PFC_SH7734 if CPU_SUBTYPE_SH7734
- select PINCTRL_PFC_SH7757 if CPU_SUBTYPE_SH7757
- select PINCTRL_PFC_SH7785 if CPU_SUBTYPE_SH7785
- select PINCTRL_PFC_SH7786 if CPU_SUBTYPE_SH7786
- select PINCTRL_PFC_SHX3 if CPU_SUBTYPE_SHX3
help
This enables pin control drivers for Renesas SuperH and ARM platforms
@@ -255,57 +243,10 @@ config PINCTRL_RZV2M
This selects GPIO and pinctrl driver for Renesas RZ/V2M
platforms.
-config PINCTRL_PFC_SH7203
- bool "pin control support for SH7203" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7264
- bool "pin control support for SH7264" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7269
- bool "pin control support for SH7269" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7720
- bool "pin control support for SH7720" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7722
- bool "pin control support for SH7722" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7734
- bool "pin control support for SH7734" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7757
- bool "pin control support for SH7757" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7785
- bool "pin control support for SH7785" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7786
- bool "pin control support for SH7786" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH73A0
bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
select REGULATOR
-config PINCTRL_PFC_SH7723
- bool "pin control support for SH-Mobile R2" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7724
- bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SHX3
- bool "pin control support for SH-X3" if COMPILE_TEST
- select PINCTRL_SH_FUNC_GPIO
-
endmenu
diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile
index 558b30ce0dec98..115f6565948c7d 100644
--- a/drivers/pinctrl/renesas/Makefile
+++ b/drivers/pinctrl/renesas/Makefile
@@ -32,37 +32,10 @@ obj-$(CONFIG_PINCTRL_PFC_R8A77995) += pfc-r8a77995.o
obj-$(CONFIG_PINCTRL_PFC_R8A779A0) += pfc-r8a779a0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779F0) += pfc-r8a779f0.o
obj-$(CONFIG_PINCTRL_PFC_R8A779G0) += pfc-r8a779g0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o
-obj-$(CONFIG_PINCTRL_PFC_SH7264) += pfc-sh7264.o
-obj-$(CONFIG_PINCTRL_PFC_SH7269) += pfc-sh7269.o
obj-$(CONFIG_PINCTRL_PFC_SH73A0) += pfc-sh73a0.o
-obj-$(CONFIG_PINCTRL_PFC_SH7720) += pfc-sh7720.o
-obj-$(CONFIG_PINCTRL_PFC_SH7722) += pfc-sh7722.o
-obj-$(CONFIG_PINCTRL_PFC_SH7723) += pfc-sh7723.o
-obj-$(CONFIG_PINCTRL_PFC_SH7724) += pfc-sh7724.o
-obj-$(CONFIG_PINCTRL_PFC_SH7734) += pfc-sh7734.o
-obj-$(CONFIG_PINCTRL_PFC_SH7757) += pfc-sh7757.o
-obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o
-obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o
-obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o
obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
obj-$(CONFIG_PINCTRL_RZG2L) += pinctrl-rzg2l.o
obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
obj-$(CONFIG_PINCTRL_RZV2M) += pinctrl-rzv2m.o
-
-ifeq ($(CONFIG_COMPILE_TEST),y)
-CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7269.o += -I$(srctree)/arch/sh/include/cpu-sh2a
-CFLAGS_pfc-sh7720.o += -I$(srctree)/arch/sh/include/cpu-sh3
-CFLAGS_pfc-sh7722.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7723.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7724.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7734.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7757.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7785.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-sh7786.o += -I$(srctree)/arch/sh/include/cpu-sh4
-CFLAGS_pfc-shx3.o += -I$(srctree)/arch/sh/include/cpu-sh4
-endif
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index c91102d3f1d155..47f2cc786cbb76 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
-#ifdef DEBUG
-#define SH_PFC_MAX_REGS 300
-#define SH_PFC_MAX_ENUMS 5000
-
-static unsigned int sh_pfc_errors __initdata;
-static unsigned int sh_pfc_warnings __initdata;
-static bool sh_pfc_bias_done __initdata;
-static bool sh_pfc_drive_done __initdata;
-static bool sh_pfc_power_done __initdata;
-static struct {
- u32 reg;
- u32 bits;
-} *sh_pfc_regs __initdata;
-static u32 sh_pfc_num_regs __initdata;
-static u16 *sh_pfc_enums __initdata;
-static u32 sh_pfc_num_enums __initdata;
-
-#define sh_pfc_err(fmt, ...) \
- do { \
- pr_err("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_errors++; \
- } while (0)
-
-#define sh_pfc_err_once(type, fmt, ...) \
- do { \
- if (!sh_pfc_ ## type ## _done) { \
- sh_pfc_ ## type ## _done = true; \
- sh_pfc_err(fmt, ##__VA_ARGS__); \
- } \
- } while (0)
-
-#define sh_pfc_warn(fmt, ...) \
- do { \
- pr_warn("%s: " fmt, drvname, ##__VA_ARGS__); \
- sh_pfc_warnings++; \
- } while (0)
-
-static bool __init is0s(const u16 *enum_ids, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++)
- if (enum_ids[i])
- return false;
-
- return true;
-}
-
-static bool __init same_name(const char *a, const char *b)
-{
- return a && b && !strcmp(a, b);
-}
-
-static void __init sh_pfc_check_reg(const char *drvname, u32 reg, u32 bits)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_regs; i++) {
- if (reg != sh_pfc_regs[i].reg)
- continue;
-
- if (bits & sh_pfc_regs[i].bits)
- sh_pfc_err("reg 0x%x: bits 0x%x conflict\n", reg,
- bits & sh_pfc_regs[i].bits);
-
- sh_pfc_regs[i].bits |= bits;
- return;
- }
-
- if (sh_pfc_num_regs == SH_PFC_MAX_REGS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_REGS\n", drvname);
- return;
- }
-
- sh_pfc_regs[sh_pfc_num_regs].reg = reg;
- sh_pfc_regs[sh_pfc_num_regs].bits = bits;
- sh_pfc_num_regs++;
-}
-
-static int __init sh_pfc_check_enum(const char *drvname, u16 enum_id)
-{
- unsigned int i;
-
- for (i = 0; i < sh_pfc_num_enums; i++) {
- if (enum_id == sh_pfc_enums[i])
- return -EINVAL;
- }
-
- if (sh_pfc_num_enums == SH_PFC_MAX_ENUMS) {
- pr_warn_once("%s: Please increase SH_PFC_MAX_ENUMS\n", drvname);
- return 0;
- }
-
- sh_pfc_enums[sh_pfc_num_enums++] = enum_id;
- return 0;
-}
-
-static void __init sh_pfc_check_reg_enums(const char *drvname, u32 reg,
- const u16 *enums, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; i++) {
- if (enums[i] && sh_pfc_check_enum(drvname, enums[i]))
- sh_pfc_err("reg 0x%x enum_id %u conflict\n", reg,
- enums[i]);
- }
-}
-
-static const struct sh_pfc_pin __init *sh_pfc_find_pin(
- const struct sh_pfc_soc_info *info, u32 reg, unsigned int pin)
-{
- const char *drvname = info->name;
- unsigned int i;
-
- if (pin == SH_PFC_PIN_NONE)
- return NULL;
-
- for (i = 0; i < info->nr_pins; i++) {
- if (pin == info->pins[i].pin)
- return &info->pins[i];
- }
-
- sh_pfc_err("reg 0x%x: pin %u not found\n", reg, pin);
- return NULL;
-}
-
-static void __init sh_pfc_check_cfg_reg(const char *drvname,
- const struct pinmux_cfg_reg *cfg_reg)
-{
- unsigned int i, n, rw, r;
- int fw;
-
- sh_pfc_check_reg(drvname, cfg_reg->reg,
- GENMASK(cfg_reg->reg_width - 1, 0));
-
- if (cfg_reg->field_width) {
- fw = cfg_reg->field_width;
- n = (cfg_reg->reg_width / fw) << fw;
- for (i = 0, r = 0; i < n; i += 1 << fw) {
- if (is0s(&cfg_reg->enum_ids[i], 1 << fw))
- r++;
- }
-
- if ((r << fw) * sizeof(u16) > cfg_reg->reg_width / fw)
- sh_pfc_warn("reg 0x%x can be described with variable-width reserved fields\n",
- cfg_reg->reg);
-
- /* Skip field checks (done at build time) */
- goto check_enum_ids;
- }
-
- for (i = 0, n = 0, rw = 0; (fw = cfg_reg->var_field_width[i]); i++) {
- if (fw < 0) {
- rw += -fw;
- } else {
- if (is0s(&cfg_reg->enum_ids[n], 1 << fw))
- sh_pfc_warn("reg 0x%x: field [%u:%u] can be described as reserved\n",
- cfg_reg->reg, rw, rw + fw - 1);
- n += 1 << fw;
- rw += fw;
- }
- }
-
- if (rw != cfg_reg->reg_width)
- sh_pfc_err("reg 0x%x: var_field_width declares %u instead of %u bits\n",
- cfg_reg->reg, rw, cfg_reg->reg_width);
-
- if (n != cfg_reg->nr_enum_ids)
- sh_pfc_err("reg 0x%x: enum_ids[] has %u instead of %u values\n",
- cfg_reg->reg, cfg_reg->nr_enum_ids, n);
-
-check_enum_ids:
- sh_pfc_check_reg_enums(drvname, cfg_reg->reg, cfg_reg->enum_ids, n);
-}
-
-static void __init sh_pfc_check_drive_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_drive_reg *drive)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(drive->fields); i++) {
- const struct pinmux_drive_reg_field *field = &drive->fields[i];
-
- if (!field->pin && !field->offset && !field->size)
- continue;
-
- sh_pfc_check_reg(info->name, drive->reg,
- GENMASK(field->offset + field->size - 1,
- field->offset));
-
- pin = sh_pfc_find_pin(info, drive->reg, field->pin);
- if (pin && !(pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH))
- sh_pfc_err("drive_reg 0x%x: field %u: pin %s lacks SH_PFC_PIN_CFG_DRIVE_STRENGTH flag\n",
- drive->reg, i, pin->name);
- }
-}
-
-static void __init sh_pfc_check_bias_reg(const struct sh_pfc_soc_info *info,
- const struct pinmux_bias_reg *bias)
-{
- const char *drvname = info->name;
- const struct sh_pfc_pin *pin;
- unsigned int i;
- u32 bits;
-
- for (i = 0, bits = 0; i < ARRAY_SIZE(bias->pins); i++)
- if (bias->pins[i] != SH_PFC_PIN_NONE)
- bits |= BIT(i);
-
- if (bias->puen)
- sh_pfc_check_reg(info->name, bias->puen, bits);
- if (bias->pud)
- sh_pfc_check_reg(info->name, bias->pud, bits);
- for (i = 0; i < ARRAY_SIZE(bias->pins); i++) {
- pin = sh_pfc_find_pin(info, bias->puen, bias->pins[i]);
- if (!pin)
- continue;
-
- if (bias->puen && bias->pud) {
- /*
- * Pull-enable and pull-up/down control registers
- * As some SoCs have pins that support only pull-up
- * or pull-down, we just check for one of them
- */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks one or more SH_PFC_PIN_CFG_PULL_* flags\n",
- bias->puen, i, pin->name);
- } else if (bias->puen) {
- /* Pull-up control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_UP))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_UP flag\n",
- bias->puen, i, pin->name);
- } else if (bias->pud) {
- /* Pull-down control register only */
- if (!(pin->configs & SH_PFC_PIN_CFG_PULL_DOWN))
- sh_pfc_err("bias_reg 0x%x:%u: pin %s lacks SH_PFC_PIN_CFG_PULL_DOWN flag\n",
- bias->pud, i, pin->name);
- }
- }
-}
-
-static void __init sh_pfc_compare_groups(const char *drvname,
- const struct sh_pfc_pin_group *a,
- const struct sh_pfc_pin_group *b)
-{
- unsigned int i;
- size_t len;
-
- if (same_name(a->name, b->name))
- sh_pfc_err("group %s: name conflict\n", a->name);
-
- if (a->nr_pins > b->nr_pins)
- swap(a, b);
-
- len = a->nr_pins * sizeof(a->pins[0]);
- for (i = 0; i <= b->nr_pins - a->nr_pins; i++) {
- if (a->pins == b->pins + i || a->mux == b->mux + i ||
- memcmp(a->pins, b->pins + i, len) ||
- memcmp(a->mux, b->mux + i, len))
- continue;
-
- if (a->nr_pins == b->nr_pins)
- sh_pfc_warn("group %s can be an alias for %s\n",
- a->name, b->name);
- else
- sh_pfc_warn("group %s is a subset of %s\n", a->name,
- b->name);
- }
-}
-
-static void __init sh_pfc_check_info(const struct sh_pfc_soc_info *info)
-{
- const struct pinmux_drive_reg *drive_regs = info->drive_regs;
-#define drive_nfields ARRAY_SIZE(drive_regs->fields)
-#define drive_ofs(i) drive_regs[(i) / drive_nfields]
-#define drive_reg(i) drive_ofs(i).reg
-#define drive_bit(i) ((i) % drive_nfields)
-#define drive_field(i) drive_ofs(i).fields[drive_bit(i)]
- const struct pinmux_bias_reg *bias_regs = info->bias_regs;
-#define bias_npins ARRAY_SIZE(bias_regs->pins)
-#define bias_ofs(i) bias_regs[(i) / bias_npins]
-#define bias_puen(i) bias_ofs(i).puen
-#define bias_pud(i) bias_ofs(i).pud
-#define bias_bit(i) ((i) % bias_npins)
-#define bias_pin(i) bias_ofs(i).pins[bias_bit(i)]
- const char *drvname = info->name;
- unsigned int *refcnts;
- unsigned int i, j, k;
-
- pr_info("sh_pfc: Checking %s\n", drvname);
- sh_pfc_num_regs = 0;
- sh_pfc_num_enums = 0;
- sh_pfc_bias_done = false;
- sh_pfc_drive_done = false;
- sh_pfc_power_done = false;
-
- /* Check pins */
- for (i = 0; i < info->nr_pins; i++) {
- const struct sh_pfc_pin *pin = &info->pins[i];
- unsigned int x;
-
- if (!pin->name) {
- sh_pfc_err("empty pin %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- const struct sh_pfc_pin *pin2 = &info->pins[j];
-
- if (same_name(pin->name, pin2->name))
- sh_pfc_err("pin %s: name conflict\n",
- pin->name);
-
- if (pin->pin != (u16)-1 && pin->pin == pin2->pin)
- sh_pfc_err("pin %s/%s: pin %u conflict\n",
- pin->name, pin2->name, pin->pin);
-
- if (pin->enum_id && pin->enum_id == pin2->enum_id)
- sh_pfc_err("pin %s/%s: enum_id %u conflict\n",
- pin->name, pin2->name,
- pin->enum_id);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) {
- if (!info->ops || !info->ops->get_bias ||
- !info->ops->set_bias)
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_* flag set but .[gs]et_bias() not implemented\n");
-
- if (!bias_regs &&
- (!info->ops || !info->ops->pin_to_portcr))
- sh_pfc_err_once(bias, "SH_PFC_PIN_CFG_PULL_UP flag set but no bias_regs defined and .pin_to_portcr() not implemented\n");
- }
-
- if ((pin->configs & SH_PFC_PIN_CFG_PULL_UP_DOWN) && bias_regs) {
- const struct pinmux_bias_reg *bias_reg =
- rcar_pin_to_bias_reg(info, pin->pin, &x);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_UP) &&
- !bias_reg->puen))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_UP flag set but pin not in bias_regs\n",
- pin->name);
-
- if (!bias_reg ||
- ((pin->configs & SH_PFC_PIN_CFG_PULL_DOWN) &&
- !bias_reg->pud))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_PULL_DOWN flag set but pin not in bias_regs\n",
- pin->name);
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_DRIVE_STRENGTH) {
- if (!drive_regs) {
- sh_pfc_err_once(drive, "SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but drive_regs missing\n");
- } else {
- for (j = 0; drive_reg(j); j++) {
- if (!drive_field(j).pin &&
- !drive_field(j).offset &&
- !drive_field(j).size)
- continue;
-
- if (drive_field(j).pin == pin->pin)
- break;
- }
-
- if (!drive_reg(j))
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_DRIVE_STRENGTH flag set but not in drive_regs\n",
- pin->name);
- }
- }
-
- if (pin->configs & SH_PFC_PIN_CFG_IO_VOLTAGE) {
- if (!info->ops || !info->ops->pin_to_pocctrl)
- sh_pfc_err_once(power, "SH_PFC_PIN_CFG_IO_VOLTAGE flag set but .pin_to_pocctrl() not implemented\n");
- else if (info->ops->pin_to_pocctrl(pin->pin, &x) < 0)
- sh_pfc_err("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE set but invalid pin_to_pocctrl()\n",
- pin->name);
- } else if (info->ops && info->ops->pin_to_pocctrl &&
- info->ops->pin_to_pocctrl(pin->pin, &x) >= 0) {
- sh_pfc_warn("pin %s: SH_PFC_PIN_CFG_IO_VOLTAGE not set but valid pin_to_pocctrl()\n",
- pin->name);
- }
- }
-
- /* Check groups and functions */
- refcnts = kcalloc(info->nr_groups, sizeof(*refcnts), GFP_KERNEL);
- if (!refcnts)
- return;
-
- for (i = 0; i < info->nr_functions; i++) {
- const struct sh_pfc_function *func = &info->functions[i];
-
- if (!func->name) {
- sh_pfc_err("empty function %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->functions[j].name))
- sh_pfc_err("function %s: name conflict\n",
- func->name);
- }
- for (j = 0; j < func->nr_groups; j++) {
- for (k = 0; k < info->nr_groups; k++) {
- if (same_name(func->groups[j],
- info->groups[k].name)) {
- refcnts[k]++;
- break;
- }
- }
-
- if (k == info->nr_groups)
- sh_pfc_err("function %s: group %s not found\n",
- func->name, func->groups[j]);
- }
- }
-
- for (i = 0; i < info->nr_groups; i++) {
- const struct sh_pfc_pin_group *group = &info->groups[i];
-
- if (!group->name) {
- sh_pfc_err("empty group %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++)
- sh_pfc_compare_groups(drvname, group, &info->groups[j]);
-
- if (!refcnts[i])
- sh_pfc_err("orphan group %s\n", group->name);
- else if (refcnts[i] > 1)
- sh_pfc_warn("group %s referenced by %u functions\n",
- group->name, refcnts[i]);
- }
-
- kfree(refcnts);
-
- /* Check config register descriptions */
- for (i = 0; info->cfg_regs && info->cfg_regs[i].reg; i++)
- sh_pfc_check_cfg_reg(drvname, &info->cfg_regs[i]);
-
- /* Check drive strength registers */
- for (i = 0; drive_regs && drive_regs[i].reg; i++)
- sh_pfc_check_drive_reg(info, &drive_regs[i]);
-
- for (i = 0; drive_regs && drive_reg(i); i++) {
- if (!drive_field(i).pin && !drive_field(i).offset &&
- !drive_field(i).size)
- continue;
-
- for (j = 0; j < i; j++) {
- if (drive_field(i).pin == drive_field(j).pin &&
- drive_field(j).offset && drive_field(j).size) {
- sh_pfc_err("drive_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- drive_reg(i), drive_bit(i),
- drive_reg(j), drive_bit(j));
- }
- }
- }
-
- /* Check bias registers */
- for (i = 0; bias_regs && (bias_regs[i].puen || bias_regs[i].pud); i++)
- sh_pfc_check_bias_reg(info, &bias_regs[i]);
-
- for (i = 0; bias_regs && (bias_puen(i) || bias_pud(i)); i++) {
- if (bias_pin(i) == SH_PFC_PIN_NONE)
- continue;
-
- for (j = 0; j < i; j++) {
- if (bias_pin(i) != bias_pin(j))
- continue;
-
- if (bias_puen(i) && bias_puen(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_puen(i), bias_bit(i),
- bias_puen(j), bias_bit(j));
- if (bias_pud(i) && bias_pud(j))
- sh_pfc_err("bias_reg 0x%x:%zu/0x%x:%zu: pin conflict\n",
- bias_pud(i), bias_bit(i),
- bias_pud(j), bias_bit(j));
- }
- }
-
- /* Check ioctrl registers */
- for (i = 0; info->ioctrl_regs && info->ioctrl_regs[i].reg; i++)
- sh_pfc_check_reg(drvname, info->ioctrl_regs[i].reg, U32_MAX);
-
- /* Check data registers */
- for (i = 0; info->data_regs && info->data_regs[i].reg; i++) {
- sh_pfc_check_reg(drvname, info->data_regs[i].reg,
- GENMASK(info->data_regs[i].reg_width - 1, 0));
- sh_pfc_check_reg_enums(drvname, info->data_regs[i].reg,
- info->data_regs[i].enum_ids,
- info->data_regs[i].reg_width);
- }
-
-#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
- /* Check function GPIOs */
- for (i = 0; i < info->nr_func_gpios; i++) {
- const struct pinmux_func *func = &info->func_gpios[i];
-
- if (!func->name) {
- sh_pfc_err("empty function gpio %u\n", i);
- continue;
- }
- for (j = 0; j < i; j++) {
- if (same_name(func->name, info->func_gpios[j].name))
- sh_pfc_err("func_gpio %s: name conflict\n",
- func->name);
- }
- if (sh_pfc_check_enum(drvname, func->enum_id))
- sh_pfc_err("%s enum_id %u conflict\n", func->name,
- func->enum_id);
- }
-#endif
-}
-
-static void __init sh_pfc_check_driver(const struct platform_driver *pdrv)
-{
- unsigned int i;
-
- if (!IS_ENABLED(CONFIG_SUPERH) &&
- !of_find_matching_node(NULL, pdrv->driver.of_match_table))
- return;
-
- sh_pfc_regs = kcalloc(SH_PFC_MAX_REGS, sizeof(*sh_pfc_regs),
- GFP_KERNEL);
- if (!sh_pfc_regs)
- return;
-
- sh_pfc_enums = kcalloc(SH_PFC_MAX_ENUMS, sizeof(*sh_pfc_enums),
- GFP_KERNEL);
- if (!sh_pfc_enums)
- goto free_regs;
-
- pr_warn("sh_pfc: Checking builtin pinmux tables\n");
-
- for (i = 0; pdrv->id_table[i].name[0]; i++)
- sh_pfc_check_info((void *)pdrv->id_table[i].driver_data);
-
-#ifdef CONFIG_OF
- for (i = 0; pdrv->driver.of_match_table[i].compatible[0]; i++)
- sh_pfc_check_info(pdrv->driver.of_match_table[i].data);
-#endif
-
- pr_warn("sh_pfc: Detected %u errors and %u warnings\n", sh_pfc_errors,
- sh_pfc_warnings);
-
- kfree(sh_pfc_enums);
-free_regs:
- kfree(sh_pfc_regs);
-}
-
-#else /* !DEBUG */
-static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {}
-#endif /* !DEBUG */
-
#ifdef CONFIG_OF
static const void *sh_pfc_quirk_match(void)
{
@@ -1409,49 +853,8 @@ static int sh_pfc_probe(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id sh_pfc_id_table[] = {
-#ifdef CONFIG_PINCTRL_PFC_SH7203
- { "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7264
- { "pfc-sh7264", (kernel_ulong_t)&sh7264_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7269
- { "pfc-sh7269", (kernel_ulong_t)&sh7269_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7720
- { "pfc-sh7720", (kernel_ulong_t)&sh7720_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7722
- { "pfc-sh7722", (kernel_ulong_t)&sh7722_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7723
- { "pfc-sh7723", (kernel_ulong_t)&sh7723_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7724
- { "pfc-sh7724", (kernel_ulong_t)&sh7724_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7734
- { "pfc-sh7734", (kernel_ulong_t)&sh7734_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7757
- { "pfc-sh7757", (kernel_ulong_t)&sh7757_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7785
- { "pfc-sh7785", (kernel_ulong_t)&sh7785_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SH7786
- { "pfc-sh7786", (kernel_ulong_t)&sh7786_pinmux_info },
-#endif
-#ifdef CONFIG_PINCTRL_PFC_SHX3
- { "pfc-shx3", (kernel_ulong_t)&shx3_pinmux_info },
-#endif
- { },
-};
-
static struct platform_driver sh_pfc_driver = {
.probe = sh_pfc_probe,
- .id_table = sh_pfc_id_table,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(sh_pfc_of_table),
@@ -1461,7 +864,6 @@ static struct platform_driver sh_pfc_driver = {
static int __init sh_pfc_init(void)
{
- sh_pfc_check_driver(&sh_pfc_driver);
return platform_driver_register(&sh_pfc_driver);
}
postcore_initcall(sh_pfc_init);
diff --git a/drivers/pinctrl/renesas/pfc-sh7203.c b/drivers/pinctrl/renesas/pfc-sh7203.c
deleted file mode 100644
index 19735746b1bb21..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7203.c
+++ /dev/null
@@ -1,1577 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7203 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7203.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PC14_IN, PC13_IN, PC12_IN,
- PC11_IN, PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE15_IN, PE14_IN, PE13_IN, PE12_IN,
- PE11_IN, PE10_IN, PE9_IN, PE8_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF30_IN, PF29_IN, PF28_IN,
- PF27_IN, PF26_IN, PF25_IN, PF24_IN,
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PC14_OUT, PC13_OUT, PC12_OUT,
- PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE15_OUT, PE14_OUT, PE13_OUT, PE12_OUT,
- PE11_OUT, PE10_OUT, PE9_OUT, PE8_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF30_OUT, PF29_OUT, PF28_OUT,
- PF27_OUT, PF26_OUT, PF25_OUT, PF24_OUT,
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_0, PB11MD_1,
- PB10MD_0, PB10MD_1,
- PB9MD_00, PB9MD_01, PB9MD_10,
- PB8MD_00, PB8MD_01, PB8MD_10,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
-
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10,
-
- PC14MD_0, PC14MD_1,
- PC13MD_0, PC13MD_1,
- PC12MD_0, PC12MD_1,
- PC11MD_00, PC11MD_01, PC11MD_10,
- PC10MD_00, PC10MD_01, PC10MD_10,
- PC9MD_0, PC9MD_1,
- PC8MD_0, PC8MD_1,
- PC7MD_0, PC7MD_1,
- PC6MD_0, PC6MD_1,
- PC5MD_0, PC5MD_1,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_00, PC0MD_01, PC0MD_10,
-
- PD15MD_000, PD15MD_001, PD15MD_010, PD15MD_100, PD15MD_101,
- PD14MD_000, PD14MD_001, PD14MD_010, PD14MD_101,
- PD13MD_000, PD13MD_001, PD13MD_010, PD13MD_100, PD13MD_101,
- PD12MD_000, PD12MD_001, PD12MD_010, PD12MD_100, PD12MD_101,
- PD11MD_000, PD11MD_001, PD11MD_010, PD11MD_100, PD11MD_101,
- PD10MD_000, PD10MD_001, PD10MD_010, PD10MD_100, PD10MD_101,
- PD9MD_000, PD9MD_001, PD9MD_010, PD9MD_100, PD9MD_101,
- PD8MD_000, PD8MD_001, PD8MD_010, PD8MD_100, PD8MD_101,
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011, PD7MD_100, PD7MD_101,
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011, PD6MD_100, PD6MD_101,
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011, PD5MD_100, PD5MD_101,
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011, PD4MD_100, PD4MD_101,
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011, PD3MD_100, PD3MD_101,
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011, PD2MD_100, PD2MD_101,
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011, PD1MD_100, PD1MD_101,
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011, PD0MD_100, PD0MD_101,
-
- PE15MD_00, PE15MD_01, PE15MD_11,
- PE14MD_00, PE14MD_01, PE14MD_11,
- PE13MD_00, PE13MD_11,
- PE12MD_00, PE12MD_11,
- PE11MD_000, PE11MD_001, PE11MD_010, PE11MD_100,
- PE10MD_000, PE10MD_001, PE10MD_010, PE10MD_100,
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011, PE7MD_100,
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011, PE6MD_100,
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011, PE5MD_100,
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011, PE4MD_100,
- PE3MD_00, PE3MD_01, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_11,
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- PE0MD_000, PE0MD_001, PE0MD_011, PE0MD_100,
-
- PF30MD_0, PF30MD_1,
- PF29MD_0, PF29MD_1,
- PF28MD_0, PF28MD_1,
- PF27MD_0, PF27MD_1,
- PF26MD_0, PF26MD_1,
- PF25MD_0, PF25MD_1,
- PF24MD_0, PF24MD_1,
- PF23MD_00, PF23MD_01, PF23MD_10,
- PF22MD_00, PF22MD_01, PF22MD_10,
- PF21MD_00, PF21MD_01, PF21MD_10,
- PF20MD_00, PF20MD_01, PF20MD_10,
- PF19MD_00, PF19MD_01, PF19MD_10,
- PF18MD_00, PF18MD_01, PF18MD_10,
- PF17MD_00, PF17MD_01, PF17MD_10,
- PF16MD_00, PF16MD_01, PF16MD_10,
- PF15MD_00, PF15MD_01, PF15MD_10,
- PF14MD_00, PF14MD_01, PF14MD_10,
- PF13MD_00, PF13MD_01, PF13MD_10,
- PF12MD_00, PF12MD_01, PF12MD_10,
- PF11MD_00, PF11MD_01, PF11MD_10,
- PF10MD_00, PF10MD_01, PF10MD_10,
- PF9MD_00, PF9MD_01, PF9MD_10,
- PF8MD_00, PF8MD_01, PF8MD_10,
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- PINT7_PB_MARK, PINT6_PB_MARK, PINT5_PB_MARK, PINT4_PB_MARK,
- PINT3_PB_MARK, PINT2_PB_MARK, PINT1_PB_MARK, PINT0_PB_MARK,
- PINT7_PD_MARK, PINT6_PD_MARK, PINT5_PD_MARK, PINT4_PD_MARK,
- PINT3_PD_MARK, PINT2_PD_MARK, PINT1_PD_MARK, PINT0_PD_MARK,
- IRQ7_PB_MARK, IRQ6_PB_MARK, IRQ5_PB_MARK, IRQ4_PB_MARK,
- IRQ3_PB_MARK, IRQ2_PB_MARK, IRQ1_PB_MARK, IRQ0_PB_MARK,
- IRQ7_PD_MARK, IRQ6_PD_MARK, IRQ5_PD_MARK, IRQ4_PD_MARK,
- IRQ3_PD_MARK, IRQ2_PD_MARK, IRQ1_PD_MARK, IRQ0_PD_MARK,
- IRQ7_PE_MARK, IRQ6_PE_MARK, IRQ5_PE_MARK, IRQ4_PE_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
- WDTOVF_MARK, IRQOUT_MARK, REFOUT_MARK, IRQOUT_REFOUT_MARK,
- UBCTRG_MARK,
- CTX1_MARK, CRX1_MARK, CTX0_MARK, CTX0_CTX1_MARK,
- CRX0_MARK, CRX0_CRX1_MARK,
- SDA3_MARK, SCL3_MARK,
- SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK,
- SDA0_MARK, SCL0_MARK,
- TEND0_PD_MARK, TEND0_PE_MARK, DACK0_PD_MARK, DACK0_PE_MARK,
- DREQ0_PD_MARK, DREQ0_PE_MARK, TEND1_PD_MARK, TEND1_PE_MARK,
- DACK1_PD_MARK, DACK1_PE_MARK, DREQ1_PD_MARK, DREQ1_PE_MARK,
- DACK2_MARK, DREQ2_MARK, DACK3_MARK, DREQ3_MARK,
- ADTRG_PD_MARK, ADTRG_PE_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, CS4_MARK, MRES_MARK, BS_MARK,
- IOIS16_MARK, CS1_MARK, CS6_CE1B_MARK, CE2B_MARK,
- CS5_CE1A_MARK, CE2A_MARK, FRAME_MARK, WAIT_MARK,
- RDWR_MARK, CKE_MARK, CASU_MARK, BREQ_MARK,
- RASU_MARK, BACK_MARK, CASL_MARK, RASL_MARK,
- WE3_DQMUU_AH_ICIO_WR_MARK, WE2_DQMUL_ICIORD_MARK,
- WE1_DQMLU_WE_MARK, WE0_DQMLL_MARK,
- CS3_MARK, CS2_MARK, A1_MARK, A0_MARK, CS7_MARK,
- TIOC4D_MARK, TIOC4C_MARK, TIOC4B_MARK, TIOC4A_MARK,
- TIOC3D_MARK, TIOC3C_MARK, TIOC3B_MARK, TIOC3A_MARK,
- TIOC2B_MARK, TIOC1B_MARK, TIOC2A_MARK, TIOC1A_MARK,
- TIOC0D_MARK, TIOC0C_MARK, TIOC0B_MARK, TIOC0A_MARK,
- TCLKD_PD_MARK, TCLKC_PD_MARK, TCLKB_PD_MARK, TCLKA_PD_MARK,
- TCLKD_PF_MARK, TCLKC_PF_MARK, TCLKB_PF_MARK, TCLKA_PF_MARK,
- SCS0_PD_MARK, SSO0_PD_MARK, SSI0_PD_MARK, SSCK0_PD_MARK,
- SCS0_PF_MARK, SSO0_PF_MARK, SSI0_PF_MARK, SSCK0_PF_MARK,
- SCS1_PD_MARK, SSO1_PD_MARK, SSI1_PD_MARK, SSCK1_PD_MARK,
- SCS1_PF_MARK, SSO1_PF_MARK, SSI1_PF_MARK, SSCK1_PF_MARK,
- TXD0_MARK, RXD0_MARK, SCK0_MARK,
- TXD1_MARK, RXD1_MARK, SCK1_MARK,
- TXD2_MARK, RXD2_MARK, SCK2_MARK,
- RTS3_MARK, CTS3_MARK, TXD3_MARK,
- RXD3_MARK, SCK3_MARK,
- AUDIO_CLK_MARK,
- SSIDATA3_MARK, SSIWS3_MARK, SSISCK3_MARK,
- SSIDATA2_MARK, SSIWS2_MARK, SSISCK2_MARK,
- SSIDATA1_MARK, SSIWS1_MARK, SSISCK1_MARK,
- SSIDATA0_MARK, SSIWS0_MARK, SSISCK0_MARK,
- FCE_MARK, FRB_MARK,
- NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK,
- FSC_MARK, FOE_MARK, FCDE_MARK, FWE_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK, LCD_CLK_MARK, LCD_FLM_MARK,
- LCD_M_DISP_MARK, LCD_CL2_MARK, LCD_CL1_MARK, LCD_DON_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA */
- PINMUX_DATA(PA7_DATA, PA7_IN),
- PINMUX_DATA(PA6_DATA, PA6_IN),
- PINMUX_DATA(PA5_DATA, PA5_IN),
- PINMUX_DATA(PA4_DATA, PA4_IN),
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* PB */
- PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
- PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
- PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
- PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
- PINMUX_DATA(IRQOUT_REFOUT_MARK, PB12MD_10, PB12IRQ_10),
- PINMUX_DATA(UBCTRG_MARK, PB12MD_11),
-
- PINMUX_DATA(PB11_DATA, PB11MD_0, PB11_IN, PB11_OUT),
- PINMUX_DATA(CTX1_MARK, PB11MD_1),
-
- PINMUX_DATA(PB10_DATA, PB10MD_0, PB10_IN, PB10_OUT),
- PINMUX_DATA(CRX1_MARK, PB10MD_1),
-
- PINMUX_DATA(PB9_DATA, PB9MD_00, PB9_IN, PB9_OUT),
- PINMUX_DATA(CTX0_MARK, PB9MD_01),
- PINMUX_DATA(CTX0_CTX1_MARK, PB9MD_10),
-
- PINMUX_DATA(PB8_DATA, PB8MD_00, PB8_IN, PB8_OUT),
- PINMUX_DATA(CRX0_MARK, PB8MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
-
- PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
- PINMUX_DATA(SDA3_MARK, PB7MD_01),
- PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
- PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
-
- PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
- PINMUX_DATA(SCL3_MARK, PB6MD_01),
- PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
- PINMUX_DATA(SDA2_MARK, PB6MD_01),
- PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
- PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
-
- PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
- PINMUX_DATA(SCL2_MARK, PB4MD_01),
- PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
- PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
-
- PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
- PINMUX_DATA(SDA1_MARK, PB3MD_01),
- PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
- PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
-
- PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
- PINMUX_DATA(SCL1_MARK, PB2MD_01),
- PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
- PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
-
- PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
- PINMUX_DATA(SDA0_MARK, PB1MD_01),
- PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
- PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
-
- PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
- PINMUX_DATA(SCL0_MARK, PB0MD_01),
- PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
- PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
-
- /* PC */
- PINMUX_DATA(PC14_DATA, PC14MD_0, PC14_IN, PC14_OUT),
- PINMUX_DATA(WAIT_MARK, PC14MD_1),
-
- PINMUX_DATA(PC13_DATA, PC13MD_0, PC13_IN, PC13_OUT),
- PINMUX_DATA(RDWR_MARK, PC13MD_1),
-
- PINMUX_DATA(PC12_DATA, PC12MD_0, PC12_IN, PC12_OUT),
- PINMUX_DATA(CKE_MARK, PC12MD_1),
-
- PINMUX_DATA(PC11_DATA, PC11MD_00, PC11_IN, PC11_OUT),
- PINMUX_DATA(CASU_MARK, PC11MD_01),
- PINMUX_DATA(BREQ_MARK, PC11MD_10),
-
- PINMUX_DATA(PC10_DATA, PC10MD_00, PC10_IN, PC10_OUT),
- PINMUX_DATA(RASU_MARK, PC10MD_01),
- PINMUX_DATA(BACK_MARK, PC10MD_10),
-
- PINMUX_DATA(PC9_DATA, PC9MD_0, PC9_IN, PC9_OUT),
- PINMUX_DATA(CASL_MARK, PC9MD_1),
-
- PINMUX_DATA(PC8_DATA, PC8MD_0, PC8_IN, PC8_OUT),
- PINMUX_DATA(RASL_MARK, PC8MD_1),
-
- PINMUX_DATA(PC7_DATA, PC7MD_0, PC7_IN, PC7_OUT),
- PINMUX_DATA(WE3_DQMUU_AH_ICIO_WR_MARK, PC7MD_1),
-
- PINMUX_DATA(PC6_DATA, PC6MD_0, PC6_IN, PC6_OUT),
- PINMUX_DATA(WE2_DQMUL_ICIORD_MARK, PC6MD_1),
-
- PINMUX_DATA(PC5_DATA, PC5MD_0, PC5_IN, PC5_OUT),
- PINMUX_DATA(WE1_DQMLU_WE_MARK, PC5MD_1),
-
- PINMUX_DATA(PC4_DATA, PC4MD_0, PC4_IN, PC4_OUT),
- PINMUX_DATA(WE0_DQMLL_MARK, PC4MD_1),
-
- PINMUX_DATA(PC3_DATA, PC3MD_0, PC3_IN, PC3_OUT),
- PINMUX_DATA(CS3_MARK, PC3MD_1),
-
- PINMUX_DATA(PC2_DATA, PC2MD_0, PC2_IN, PC2_OUT),
- PINMUX_DATA(CS2_MARK, PC2MD_1),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0, PC1_IN, PC1_OUT),
- PINMUX_DATA(A1_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_00, PC0_IN, PC0_OUT),
- PINMUX_DATA(A0_MARK, PC0MD_01),
- PINMUX_DATA(CS7_MARK, PC0MD_10),
-
- /* PD */
- PINMUX_DATA(PD15_DATA, PD15MD_000, PD15_IN, PD15_OUT),
- PINMUX_DATA(D31_MARK, PD15MD_001),
- PINMUX_DATA(PINT7_PD_MARK, PD15MD_010),
- PINMUX_DATA(ADTRG_PD_MARK, PD15MD_100),
- PINMUX_DATA(TIOC4D_MARK, PD15MD_101),
-
- PINMUX_DATA(PD14_DATA, PD14MD_000, PD14_IN, PD14_OUT),
- PINMUX_DATA(D30_MARK, PD14MD_001),
- PINMUX_DATA(PINT6_PD_MARK, PD14MD_010),
- PINMUX_DATA(TIOC4C_MARK, PD14MD_101),
-
- PINMUX_DATA(PD13_DATA, PD13MD_000, PD13_IN, PD13_OUT),
- PINMUX_DATA(D29_MARK, PD13MD_001),
- PINMUX_DATA(PINT5_PD_MARK, PD13MD_010),
- PINMUX_DATA(TEND1_PD_MARK, PD13MD_100),
- PINMUX_DATA(TIOC4B_MARK, PD13MD_101),
-
- PINMUX_DATA(PD12_DATA, PD12MD_000, PD12_IN, PD12_OUT),
- PINMUX_DATA(D28_MARK, PD12MD_001),
- PINMUX_DATA(PINT4_PD_MARK, PD12MD_010),
- PINMUX_DATA(DACK1_PD_MARK, PD12MD_100),
- PINMUX_DATA(TIOC4A_MARK, PD12MD_101),
-
- PINMUX_DATA(PD11_DATA, PD11MD_000, PD11_IN, PD11_OUT),
- PINMUX_DATA(D27_MARK, PD11MD_001),
- PINMUX_DATA(PINT3_PD_MARK, PD11MD_010),
- PINMUX_DATA(DREQ1_PD_MARK, PD11MD_100),
- PINMUX_DATA(TIOC3D_MARK, PD11MD_101),
-
- PINMUX_DATA(PD10_DATA, PD10MD_000, PD10_IN, PD10_OUT),
- PINMUX_DATA(D26_MARK, PD10MD_001),
- PINMUX_DATA(PINT2_PD_MARK, PD10MD_010),
- PINMUX_DATA(TEND0_PD_MARK, PD10MD_100),
- PINMUX_DATA(TIOC3C_MARK, PD10MD_101),
-
- PINMUX_DATA(PD9_DATA, PD9MD_000, PD9_IN, PD9_OUT),
- PINMUX_DATA(D25_MARK, PD9MD_001),
- PINMUX_DATA(PINT1_PD_MARK, PD9MD_010),
- PINMUX_DATA(DACK0_PD_MARK, PD9MD_100),
- PINMUX_DATA(TIOC3B_MARK, PD9MD_101),
-
- PINMUX_DATA(PD8_DATA, PD8MD_000, PD8_IN, PD8_OUT),
- PINMUX_DATA(D24_MARK, PD8MD_001),
- PINMUX_DATA(PINT0_PD_MARK, PD8MD_010),
- PINMUX_DATA(DREQ0_PD_MARK, PD8MD_100),
- PINMUX_DATA(TIOC3A_MARK, PD8MD_101),
-
- PINMUX_DATA(PD7_DATA, PD7MD_000, PD7_IN, PD7_OUT),
- PINMUX_DATA(D23_MARK, PD7MD_001),
- PINMUX_DATA(IRQ7_PD_MARK, PD7MD_010),
- PINMUX_DATA(SCS1_PD_MARK, PD7MD_011),
- PINMUX_DATA(TCLKD_PD_MARK, PD7MD_100),
- PINMUX_DATA(TIOC2B_MARK, PD7MD_101),
-
- PINMUX_DATA(PD6_DATA, PD6MD_000, PD6_IN, PD6_OUT),
- PINMUX_DATA(D22_MARK, PD6MD_001),
- PINMUX_DATA(IRQ6_PD_MARK, PD6MD_010),
- PINMUX_DATA(SSO1_PD_MARK, PD6MD_011),
- PINMUX_DATA(TCLKC_PD_MARK, PD6MD_100),
- PINMUX_DATA(TIOC2A_MARK, PD6MD_101),
-
- PINMUX_DATA(PD5_DATA, PD5MD_000, PD5_IN, PD5_OUT),
- PINMUX_DATA(D21_MARK, PD5MD_001),
- PINMUX_DATA(IRQ5_PD_MARK, PD5MD_010),
- PINMUX_DATA(SSI1_PD_MARK, PD5MD_011),
- PINMUX_DATA(TCLKB_PD_MARK, PD5MD_100),
- PINMUX_DATA(TIOC1B_MARK, PD5MD_101),
-
- PINMUX_DATA(PD4_DATA, PD4MD_000, PD4_IN, PD4_OUT),
- PINMUX_DATA(D20_MARK, PD4MD_001),
- PINMUX_DATA(IRQ4_PD_MARK, PD4MD_010),
- PINMUX_DATA(SSCK1_PD_MARK, PD4MD_011),
- PINMUX_DATA(TCLKA_PD_MARK, PD4MD_100),
- PINMUX_DATA(TIOC1A_MARK, PD4MD_101),
-
- PINMUX_DATA(PD3_DATA, PD3MD_000, PD3_IN, PD3_OUT),
- PINMUX_DATA(D19_MARK, PD3MD_001),
- PINMUX_DATA(IRQ3_PD_MARK, PD3MD_010),
- PINMUX_DATA(SCS0_PD_MARK, PD3MD_011),
- PINMUX_DATA(DACK3_MARK, PD3MD_100),
- PINMUX_DATA(TIOC0D_MARK, PD3MD_101),
-
- PINMUX_DATA(PD2_DATA, PD2MD_000, PD2_IN, PD2_OUT),
- PINMUX_DATA(D18_MARK, PD2MD_001),
- PINMUX_DATA(IRQ2_PD_MARK, PD2MD_010),
- PINMUX_DATA(SSO0_PD_MARK, PD2MD_011),
- PINMUX_DATA(DREQ3_MARK, PD2MD_100),
- PINMUX_DATA(TIOC0C_MARK, PD2MD_101),
-
- PINMUX_DATA(PD1_DATA, PD1MD_000, PD1_IN, PD1_OUT),
- PINMUX_DATA(D17_MARK, PD1MD_001),
- PINMUX_DATA(IRQ1_PD_MARK, PD1MD_010),
- PINMUX_DATA(SSI0_PD_MARK, PD1MD_011),
- PINMUX_DATA(DACK2_MARK, PD1MD_100),
- PINMUX_DATA(TIOC0B_MARK, PD1MD_101),
-
- PINMUX_DATA(PD0_DATA, PD0MD_000, PD0_IN, PD0_OUT),
- PINMUX_DATA(D16_MARK, PD0MD_001),
- PINMUX_DATA(IRQ0_PD_MARK, PD0MD_010),
- PINMUX_DATA(SSCK0_PD_MARK, PD0MD_011),
- PINMUX_DATA(DREQ2_MARK, PD0MD_100),
- PINMUX_DATA(TIOC0A_MARK, PD0MD_101),
-
- /* PE */
- PINMUX_DATA(PE15_DATA, PE15MD_00, PE15_IN, PE15_OUT),
- PINMUX_DATA(IOIS16_MARK, PE15MD_01),
- PINMUX_DATA(RTS3_MARK, PE15MD_11),
-
- PINMUX_DATA(PE14_DATA, PE14MD_00, PE14_IN, PE14_OUT),
- PINMUX_DATA(CS1_MARK, PE14MD_01),
- PINMUX_DATA(CTS3_MARK, PE14MD_11),
-
- PINMUX_DATA(PE13_DATA, PE13MD_00, PE13_IN, PE13_OUT),
- PINMUX_DATA(TXD3_MARK, PE13MD_11),
-
- PINMUX_DATA(PE12_DATA, PE12MD_00, PE12_IN, PE12_OUT),
- PINMUX_DATA(RXD3_MARK, PE12MD_11),
-
- PINMUX_DATA(PE11_DATA, PE11MD_000, PE11_IN, PE11_OUT),
- PINMUX_DATA(CS6_CE1B_MARK, PE11MD_001),
- PINMUX_DATA(IRQ7_PE_MARK, PE11MD_010),
- PINMUX_DATA(TEND1_PE_MARK, PE11MD_100),
-
- PINMUX_DATA(PE10_DATA, PE10MD_000, PE10_IN, PE10_OUT),
- PINMUX_DATA(CE2B_MARK, PE10MD_001),
- PINMUX_DATA(IRQ6_PE_MARK, PE10MD_010),
- PINMUX_DATA(TEND0_PE_MARK, PE10MD_100),
-
- PINMUX_DATA(PE9_DATA, PE9MD_00, PE9_IN, PE9_OUT),
- PINMUX_DATA(CS5_CE1A_MARK, PE9MD_01),
- PINMUX_DATA(IRQ5_PE_MARK, PE9MD_10),
- PINMUX_DATA(SCK3_MARK, PE9MD_11),
-
- PINMUX_DATA(PE8_DATA, PE8MD_00, PE8_IN, PE8_OUT),
- PINMUX_DATA(CE2A_MARK, PE8MD_01),
- PINMUX_DATA(IRQ4_PE_MARK, PE8MD_10),
- PINMUX_DATA(SCK2_MARK, PE8MD_11),
-
- PINMUX_DATA(PE7_DATA, PE7MD_000, PE7_IN, PE7_OUT),
- PINMUX_DATA(FRAME_MARK, PE7MD_001),
- PINMUX_DATA(IRQ3_PE_MARK, PE7MD_010),
- PINMUX_DATA(TXD2_MARK, PE7MD_011),
- PINMUX_DATA(DACK1_PE_MARK, PE7MD_100),
-
- PINMUX_DATA(PE6_DATA, PE6MD_000, PE6_IN, PE6_OUT),
- PINMUX_DATA(A25_MARK, PE6MD_001),
- PINMUX_DATA(IRQ2_PE_MARK, PE6MD_010),
- PINMUX_DATA(RXD2_MARK, PE6MD_011),
- PINMUX_DATA(DREQ1_PE_MARK, PE6MD_100),
-
- PINMUX_DATA(PE5_DATA, PE5MD_000, PE5_IN, PE5_OUT),
- PINMUX_DATA(A24_MARK, PE5MD_001),
- PINMUX_DATA(IRQ1_PE_MARK, PE5MD_010),
- PINMUX_DATA(TXD1_MARK, PE5MD_011),
- PINMUX_DATA(DACK0_PE_MARK, PE5MD_100),
-
- PINMUX_DATA(PE4_DATA, PE4MD_000, PE4_IN, PE4_OUT),
- PINMUX_DATA(A23_MARK, PE4MD_001),
- PINMUX_DATA(IRQ0_PE_MARK, PE4MD_010),
- PINMUX_DATA(RXD1_MARK, PE4MD_011),
- PINMUX_DATA(DREQ0_PE_MARK, PE4MD_100),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00, PE3_IN, PE3_OUT),
- PINMUX_DATA(A22_MARK, PE3MD_01),
- PINMUX_DATA(SCK1_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00, PE2_IN, PE2_OUT),
- PINMUX_DATA(A21_MARK, PE2MD_01),
- PINMUX_DATA(SCK0_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_00, PE1_IN, PE1_OUT),
- PINMUX_DATA(CS4_MARK, PE1MD_01),
- PINMUX_DATA(MRES_MARK, PE1MD_10),
- PINMUX_DATA(TXD0_MARK, PE1MD_11),
-
- PINMUX_DATA(PE0_DATA, PE0MD_000, PE0_IN, PE0_OUT),
- PINMUX_DATA(BS_MARK, PE0MD_001),
- PINMUX_DATA(RXD0_MARK, PE0MD_011),
- PINMUX_DATA(ADTRG_PE_MARK, PE0MD_100),
-
- /* PF */
- PINMUX_DATA(PF30_DATA, PF30MD_0, PF30_IN, PF30_OUT),
- PINMUX_DATA(AUDIO_CLK_MARK, PF30MD_1),
-
- PINMUX_DATA(PF29_DATA, PF29MD_0, PF29_IN, PF29_OUT),
- PINMUX_DATA(SSIDATA3_MARK, PF29MD_1),
-
- PINMUX_DATA(PF28_DATA, PF28MD_0, PF28_IN, PF28_OUT),
- PINMUX_DATA(SSIWS3_MARK, PF28MD_1),
-
- PINMUX_DATA(PF27_DATA, PF27MD_0, PF27_IN, PF27_OUT),
- PINMUX_DATA(SSISCK3_MARK, PF27MD_1),
-
- PINMUX_DATA(PF26_DATA, PF26MD_0, PF26_IN, PF26_OUT),
- PINMUX_DATA(SSIDATA2_MARK, PF26MD_1),
-
- PINMUX_DATA(PF25_DATA, PF25MD_0, PF25_IN, PF25_OUT),
- PINMUX_DATA(SSIWS2_MARK, PF25MD_1),
-
- PINMUX_DATA(PF24_DATA, PF24MD_0, PF24_IN, PF24_OUT),
- PINMUX_DATA(SSISCK2_MARK, PF24MD_1),
-
- PINMUX_DATA(PF23_DATA, PF23MD_00, PF23_IN, PF23_OUT),
- PINMUX_DATA(SSIDATA1_MARK, PF23MD_01),
- PINMUX_DATA(LCD_VEPWC_MARK, PF23MD_10),
-
- PINMUX_DATA(PF22_DATA, PF22MD_00, PF22_IN, PF22_OUT),
- PINMUX_DATA(SSIWS1_MARK, PF22MD_01),
- PINMUX_DATA(LCD_VCPWC_MARK, PF22MD_10),
-
- PINMUX_DATA(PF21_DATA, PF21MD_00, PF21_IN, PF21_OUT),
- PINMUX_DATA(SSISCK1_MARK, PF21MD_01),
- PINMUX_DATA(LCD_CLK_MARK, PF21MD_10),
-
- PINMUX_DATA(PF20_DATA, PF20MD_00, PF20_IN, PF20_OUT),
- PINMUX_DATA(SSIDATA0_MARK, PF20MD_01),
- PINMUX_DATA(LCD_FLM_MARK, PF20MD_10),
-
- PINMUX_DATA(PF19_DATA, PF19MD_00, PF19_IN, PF19_OUT),
- PINMUX_DATA(SSIWS0_MARK, PF19MD_01),
- PINMUX_DATA(LCD_M_DISP_MARK, PF19MD_10),
-
- PINMUX_DATA(PF18_DATA, PF18MD_00, PF18_IN, PF18_OUT),
- PINMUX_DATA(SSISCK0_MARK, PF18MD_01),
- PINMUX_DATA(LCD_CL2_MARK, PF18MD_10),
-
- PINMUX_DATA(PF17_DATA, PF17MD_00, PF17_IN, PF17_OUT),
- PINMUX_DATA(FCE_MARK, PF17MD_01),
- PINMUX_DATA(LCD_CL1_MARK, PF17MD_10),
-
- PINMUX_DATA(PF16_DATA, PF16MD_00, PF16_IN, PF16_OUT),
- PINMUX_DATA(FRB_MARK, PF16MD_01),
- PINMUX_DATA(LCD_DON_MARK, PF16MD_10),
-
- PINMUX_DATA(PF15_DATA, PF15MD_00, PF15_IN, PF15_OUT),
- PINMUX_DATA(NAF7_MARK, PF15MD_01),
- PINMUX_DATA(LCD_DATA15_MARK, PF15MD_10),
-
- PINMUX_DATA(PF14_DATA, PF14MD_00, PF14_IN, PF14_OUT),
- PINMUX_DATA(NAF6_MARK, PF14MD_01),
- PINMUX_DATA(LCD_DATA14_MARK, PF14MD_10),
-
- PINMUX_DATA(PF13_DATA, PF13MD_00, PF13_IN, PF13_OUT),
- PINMUX_DATA(NAF5_MARK, PF13MD_01),
- PINMUX_DATA(LCD_DATA13_MARK, PF13MD_10),
-
- PINMUX_DATA(PF12_DATA, PF12MD_00, PF12_IN, PF12_OUT),
- PINMUX_DATA(NAF4_MARK, PF12MD_01),
- PINMUX_DATA(LCD_DATA12_MARK, PF12MD_10),
-
- PINMUX_DATA(PF11_DATA, PF11MD_00, PF11_IN, PF11_OUT),
- PINMUX_DATA(NAF3_MARK, PF11MD_01),
- PINMUX_DATA(LCD_DATA11_MARK, PF11MD_10),
-
- PINMUX_DATA(PF10_DATA, PF10MD_00, PF10_IN, PF10_OUT),
- PINMUX_DATA(NAF2_MARK, PF10MD_01),
- PINMUX_DATA(LCD_DATA10_MARK, PF10MD_10),
-
- PINMUX_DATA(PF9_DATA, PF9MD_00, PF9_IN, PF9_OUT),
- PINMUX_DATA(NAF1_MARK, PF9MD_01),
- PINMUX_DATA(LCD_DATA9_MARK, PF9MD_10),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00, PF8_IN, PF8_OUT),
- PINMUX_DATA(NAF0_MARK, PF8MD_01),
- PINMUX_DATA(LCD_DATA8_MARK, PF8MD_10),
-
- PINMUX_DATA(PF7_DATA, PF7MD_00, PF7_IN, PF7_OUT),
- PINMUX_DATA(FSC_MARK, PF7MD_01),
- PINMUX_DATA(LCD_DATA7_MARK, PF7MD_10),
- PINMUX_DATA(SCS1_PF_MARK, PF7MD_11),
-
- PINMUX_DATA(PF6_DATA, PF6MD_00, PF6_IN, PF6_OUT),
- PINMUX_DATA(FOE_MARK, PF6MD_01),
- PINMUX_DATA(LCD_DATA6_MARK, PF6MD_10),
- PINMUX_DATA(SSO1_PF_MARK, PF6MD_11),
-
- PINMUX_DATA(PF5_DATA, PF5MD_00, PF5_IN, PF5_OUT),
- PINMUX_DATA(FCDE_MARK, PF5MD_01),
- PINMUX_DATA(LCD_DATA5_MARK, PF5MD_10),
- PINMUX_DATA(SSI1_PF_MARK, PF5MD_11),
-
- PINMUX_DATA(PF4_DATA, PF4MD_00, PF4_IN, PF4_OUT),
- PINMUX_DATA(FWE_MARK, PF4MD_01),
- PINMUX_DATA(LCD_DATA4_MARK, PF4MD_10),
- PINMUX_DATA(SSCK1_PF_MARK, PF4MD_11),
-
- PINMUX_DATA(PF3_DATA, PF3MD_00, PF3_IN, PF3_OUT),
- PINMUX_DATA(TCLKD_PF_MARK, PF3MD_01),
- PINMUX_DATA(LCD_DATA3_MARK, PF3MD_10),
- PINMUX_DATA(SCS0_PF_MARK, PF3MD_11),
-
- PINMUX_DATA(PF2_DATA, PF2MD_00, PF2_IN, PF2_OUT),
- PINMUX_DATA(TCLKC_PF_MARK, PF2MD_01),
- PINMUX_DATA(LCD_DATA2_MARK, PF2MD_10),
- PINMUX_DATA(SSO0_PF_MARK, PF2MD_11),
-
- PINMUX_DATA(PF1_DATA, PF1MD_00, PF1_IN, PF1_OUT),
- PINMUX_DATA(TCLKB_PF_MARK, PF1MD_01),
- PINMUX_DATA(LCD_DATA1_MARK, PF1MD_10),
- PINMUX_DATA(SSI0_PF_MARK, PF1MD_11),
-
- PINMUX_DATA(PF0_DATA, PF0MD_00, PF0_IN, PF0_OUT),
- PINMUX_DATA(TCLKA_PF_MARK, PF0MD_01),
- PINMUX_DATA(LCD_DATA0_MARK, PF0MD_10),
- PINMUX_DATA(SSCK0_PF_MARK, PF0MD_11),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC14),
- PINMUX_GPIO(PC13),
- PINMUX_GPIO(PC12),
- PINMUX_GPIO(PC11),
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE15),
- PINMUX_GPIO(PE14),
- PINMUX_GPIO(PE13),
- PINMUX_GPIO(PE12),
- PINMUX_GPIO(PE11),
- PINMUX_GPIO(PE10),
- PINMUX_GPIO(PE9),
- PINMUX_GPIO(PE8),
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF30),
- PINMUX_GPIO(PF29),
- PINMUX_GPIO(PF28),
- PINMUX_GPIO(PF27),
- PINMUX_GPIO(PF26),
- PINMUX_GPIO(PF25),
- PINMUX_GPIO(PF24),
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PB),
- GPIO_FN(PINT6_PB),
- GPIO_FN(PINT5_PB),
- GPIO_FN(PINT4_PB),
- GPIO_FN(PINT3_PB),
- GPIO_FN(PINT2_PB),
- GPIO_FN(PINT1_PB),
- GPIO_FN(PINT0_PB),
- GPIO_FN(PINT7_PD),
- GPIO_FN(PINT6_PD),
- GPIO_FN(PINT5_PD),
- GPIO_FN(PINT4_PD),
- GPIO_FN(PINT3_PD),
- GPIO_FN(PINT2_PD),
- GPIO_FN(PINT1_PD),
- GPIO_FN(PINT0_PD),
- GPIO_FN(IRQ7_PB),
- GPIO_FN(IRQ6_PB),
- GPIO_FN(IRQ5_PB),
- GPIO_FN(IRQ4_PB),
- GPIO_FN(IRQ3_PB),
- GPIO_FN(IRQ2_PB),
- GPIO_FN(IRQ1_PB),
- GPIO_FN(IRQ0_PB),
- GPIO_FN(IRQ7_PD),
- GPIO_FN(IRQ6_PD),
- GPIO_FN(IRQ5_PD),
- GPIO_FN(IRQ4_PD),
- GPIO_FN(IRQ3_PD),
- GPIO_FN(IRQ2_PD),
- GPIO_FN(IRQ1_PD),
- GPIO_FN(IRQ0_PD),
- GPIO_FN(IRQ7_PE),
- GPIO_FN(IRQ6_PE),
- GPIO_FN(IRQ5_PE),
- GPIO_FN(IRQ4_PE),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- GPIO_FN(WDTOVF),
- GPIO_FN(IRQOUT),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT_REFOUT),
- GPIO_FN(UBCTRG),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* IIC3 */
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* DMAC */
- GPIO_FN(TEND0_PD),
- GPIO_FN(TEND0_PE),
- GPIO_FN(DACK0_PD),
- GPIO_FN(DACK0_PE),
- GPIO_FN(DREQ0_PD),
- GPIO_FN(DREQ0_PE),
- GPIO_FN(TEND1_PD),
- GPIO_FN(TEND1_PE),
- GPIO_FN(DACK1_PD),
- GPIO_FN(DACK1_PE),
- GPIO_FN(DREQ1_PD),
- GPIO_FN(DREQ1_PE),
- GPIO_FN(DACK2),
- GPIO_FN(DREQ2),
- GPIO_FN(DACK3),
- GPIO_FN(DREQ3),
-
- /* ADC */
- GPIO_FN(ADTRG_PD),
- GPIO_FN(ADTRG_PE),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(CS4),
- GPIO_FN(MRES),
- GPIO_FN(BS),
- GPIO_FN(IOIS16),
- GPIO_FN(CS1),
- GPIO_FN(CS6_CE1B),
- GPIO_FN(CE2B),
- GPIO_FN(CS5_CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(FRAME),
- GPIO_FN(WAIT),
- GPIO_FN(RDWR),
- GPIO_FN(CKE),
- GPIO_FN(CASU),
- GPIO_FN(BREQ),
- GPIO_FN(RASU),
- GPIO_FN(BACK),
- GPIO_FN(CASL),
- GPIO_FN(RASL),
- GPIO_FN(WE3_DQMUU_AH_ICIO_WR),
- GPIO_FN(WE2_DQMUL_ICIORD),
- GPIO_FN(WE1_DQMLU_WE),
- GPIO_FN(WE0_DQMLL),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(CS7),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD_PD),
- GPIO_FN(TCLKC_PD),
- GPIO_FN(TCLKB_PD),
- GPIO_FN(TCLKA_PD),
- GPIO_FN(TCLKD_PF),
- GPIO_FN(TCLKC_PF),
- GPIO_FN(TCLKB_PF),
- GPIO_FN(TCLKA_PF),
-
- /* SSU */
- GPIO_FN(SCS0_PD),
- GPIO_FN(SSO0_PD),
- GPIO_FN(SSI0_PD),
- GPIO_FN(SSCK0_PD),
- GPIO_FN(SCS0_PF),
- GPIO_FN(SSO0_PF),
- GPIO_FN(SSI0_PF),
- GPIO_FN(SSCK0_PF),
- GPIO_FN(SCS1_PD),
- GPIO_FN(SSO1_PD),
- GPIO_FN(SSI1_PD),
- GPIO_FN(SSCK1_PD),
- GPIO_FN(SCS1_PF),
- GPIO_FN(SSO1_PF),
- GPIO_FN(SSI1_PF),
- GPIO_FN(SSCK1_PF),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
-
- /* SSI */
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(SSIDATA3),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSIDATA0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSISCK0),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FSC),
- GPIO_FN(FOE),
- GPIO_FN(FCDE),
- GPIO_FN(FWE),
-
- /* LCDC */
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PBIORL", 0xfffe3886, 16,
- GROUP(-4, 1, 1, 1, 1, -8),
- GROUP(
- /* RESERVED [4] */
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("PBCRL4", 0xfffe3890, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL3", 0xfffe3892, 16, 4, GROUP(
- PB11MD_0, PB11MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_0, PB10MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL2", 0xfffe3894, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCRL1", 0xfffe3896, 16, 4, GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB0MD_00, PB0MD_01, PB0MD_10, PB0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IFCR", 0xfffe38a2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PB12IRQ_00, PB12IRQ_01, PB12IRQ_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCIORL", 0xfffe3906, 16, 1, GROUP(
- 0, 0,
- PC14_IN, PC14_OUT,
- PC13_IN, PC13_OUT,
- PC12_IN, PC12_OUT,
- PC11_IN, PC11_OUT,
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PCCRL4", 0xfffe3910, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC14MD_0, PC14MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC13MD_0, PC13MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC12MD_0, PC12MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL3", 0xfffe3912, 16, 4, GROUP(
- PC11MD_00, PC11MD_01, PC11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC10MD_00, PC10MD_01, PC10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC9MD_0, PC9MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC8MD_0, PC8MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL2", 0xfffe3914, 16, 4, GROUP(
- PC7MD_0, PC7MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_0, PC6MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_0, PC5MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_0, PC4MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCRL1", 0xfffe3916, 16, 4, GROUP(
- PC3MD_0, PC3MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_0, PC2MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_00, PC0MD_01, PC0MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDIORL", 0xfffe3986, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
- { PINMUX_CFG_REG("PDCRL4", 0xfffe3990, 16, 4, GROUP(
- PD15MD_000, PD15MD_001, PD15MD_010, 0,
- PD15MD_100, PD15MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_000, PD14MD_001, PD14MD_010, 0,
- 0, PD14MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_000, PD13MD_001, PD13MD_010, 0,
- PD13MD_100, PD13MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_000, PD12MD_001, PD12MD_010, 0,
- PD12MD_100, PD12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL3", 0xfffe3992, 16, 4, GROUP(
- PD11MD_000, PD11MD_001, PD11MD_010, 0,
- PD11MD_100, PD11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_000, PD10MD_001, PD10MD_010, 0,
- PD10MD_100, PD10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_000, PD9MD_001, PD9MD_010, 0,
- PD9MD_100, PD9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_000, PD8MD_001, PD8MD_010, 0,
- PD8MD_100, PD8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL2", 0xfffe3994, 16, 4, GROUP(
- PD7MD_000, PD7MD_001, PD7MD_010, PD7MD_011,
- PD7MD_100, PD7MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_000, PD6MD_001, PD6MD_010, PD6MD_011,
- PD6MD_100, PD6MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_000, PD5MD_001, PD5MD_010, PD5MD_011,
- PD5MD_100, PD5MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_000, PD4MD_001, PD4MD_010, PD4MD_011,
- PD4MD_100, PD4MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCRL1", 0xfffe3996, 16, 4, GROUP(
- PD3MD_000, PD3MD_001, PD3MD_010, PD3MD_011,
- PD3MD_100, PD3MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_000, PD2MD_001, PD2MD_010, PD2MD_011,
- PD2MD_100, PD2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_000, PD1MD_001, PD1MD_010, PD1MD_011,
- PD1MD_100, PD1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_000, PD0MD_001, PD0MD_010, PD0MD_011,
- PD0MD_100, PD0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PEIORL", 0xfffe3a06, 16, 1, GROUP(
- PE15_IN, PE15_OUT,
- PE14_IN, PE14_OUT,
- PE13_IN, PE13_OUT,
- PE12_IN, PE12_OUT,
- PE11_IN, PE11_OUT,
- PE10_IN, PE10_OUT,
- PE9_IN, PE9_OUT,
- PE8_IN, PE8_OUT,
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
- { PINMUX_CFG_REG("PECRL4", 0xfffe3a10, 16, 4, GROUP(
- PE15MD_00, PE15MD_01, 0, PE15MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE14MD_00, PE14MD_01, 0, PE14MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE13MD_00, 0, 0, PE13MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE12MD_00, 0, 0, PE12MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL3", 0xfffe3a12, 16, 4, GROUP(
- PE11MD_000, PE11MD_001, PE11MD_010, 0,
- PE11MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE10MD_000, PE10MD_001, PE10MD_010, 0,
- PE10MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE9MD_00, PE9MD_01, PE9MD_10, PE9MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE8MD_00, PE8MD_01, PE8MD_10, PE8MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL2", 0xfffe3a14, 16, 4, GROUP(
- PE7MD_000, PE7MD_001, PE7MD_010, PE7MD_011,
- PE7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_000, PE6MD_001, PE6MD_010, PE6MD_011,
- PE6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_000, PE5MD_001, PE5MD_010, PE5MD_011,
- PE5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_000, PE4MD_001, PE4MD_010, PE4MD_011,
- PE4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECRL1", 0xfffe3a16, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_00, PE2MD_01, 0, PE2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_00, PE1MD_01, PE1MD_10, PE1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_000, PE0MD_001, 0, PE0MD_011,
- PE0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFIORH", 0xfffe3a84, 16, 1, GROUP(
- 0, 0,
- PF30_IN, PF30_OUT,
- PF29_IN, PF29_OUT,
- PF28_IN, PF28_OUT,
- PF27_IN, PF27_OUT,
- PF26_IN, PF26_OUT,
- PF25_IN, PF25_OUT,
- PF24_IN, PF24_OUT,
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIORL", 0xfffe3a86, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PFCRH4", 0xfffe3a88, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
-
- PF30MD_0, PF30MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF29MD_0, PF29MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF28MD_0, PF28MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH3", 0xfffe3a8a, 16, 4, GROUP(
- PF27MD_0, PF27MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF26MD_0, PF26MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF25MD_0, PF25MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF24MD_0, PF24MD_1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH2", 0xfffe3a8c, 16, 4, GROUP(
- PF23MD_00, PF23MD_01, PF23MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_00, PF22MD_01, PF22MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_00, PF21MD_01, PF21MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_00, PF20MD_01, PF20MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRH1", 0xfffe3a8e, 16, 4, GROUP(
- PF19MD_00, PF19MD_01, PF19MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_00, PF18MD_01, PF18MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_00, PF17MD_01, PF17MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_00, PF16MD_01, PF16MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL4", 0xfffe3a90, 16, 4, GROUP(
- PF15MD_00, PF15MD_01, PF15MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF14MD_00, PF14MD_01, PF14MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_00, PF13MD_01, PF13MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_00, PF12MD_01, PF12MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL3", 0xfffe3a92, 16, 4, GROUP(
- PF11MD_00, PF11MD_01, PF11MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_00, PF10MD_01, PF10MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_00, PF9MD_01, PF9MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_00, PF8MD_01, PF8MD_10, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL2", 0xfffe3a94, 16, 4, GROUP(
- PF7MD_00, PF7MD_01, PF7MD_10, PF7MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_00, PF6MD_01, PF6MD_10, PF6MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_00, PF5MD_01, PF5MD_10, PF5MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_00, PF4MD_01, PF4MD_10, PF4MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCRL1", 0xfffe3a96, 16, 4, GROUP(
- PF3MD_00, PF3MD_01, PF3MD_10, PF3MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_00, PF2MD_01, PF2MD_10, PF2MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_00, PF1MD_01, PF1MD_10, PF1MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_00, PF0MD_01, PF0MD_10, PF0MD_11,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADRL", 0xfffe3802, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDRL", 0xfffe3882, 16, GROUP(
- 0, 0, 0, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDRL", 0xfffe3902, 16, GROUP(
- 0, PC14_DATA, PC13_DATA, PC12_DATA,
- PC11_DATA, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDRL", 0xfffe3982, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDRL", 0xfffe3a02, 16, GROUP(
- PE15_DATA, PE14_DATA, PE13_DATA, PE12_DATA,
- PE11_DATA, PE10_DATA, PE9_DATA, PE8_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDRH", 0xfffe3a80, 16, GROUP(
- 0, PF30_DATA, PF29_DATA, PF28_DATA,
- PF27_DATA, PF26_DATA, PF25_DATA, PF24_DATA,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDRL", 0xfffe3a82, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7203_pinmux_info = {
- .name = "sh7203_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7264.c b/drivers/pinctrl/renesas/pfc-sh7264.c
deleted file mode 100644
index 30096925a70c5d..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7264.c
+++ /dev/null
@@ -1,2131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7264 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7264.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- /* Port K */
- PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC10_IN, PC9_IN, PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- /* Port K */
- PK12_IN,
- PK11_IN, PK10_IN, PK9_IN, PK8_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC10_OUT, PC9_OUT, PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- /* Port K */
- PK12_OUT,
- PK11_OUT, PK10_OUT, PK9_OUT, PK8_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA3_IOR_IN, PA3_IOR_OUT,
- PA2_IOR_IN, PA2_IOR_OUT,
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB22MD_00, PB22MD_01, PB22MD_10,
- PB21MD_0, PB21MD_1,
- PB20MD_0, PB20MD_1,
- PB19MD_00, PB19MD_01, PB19MD_10, PB19MD_11,
- PB18MD_00, PB18MD_01, PB18MD_10, PB18MD_11,
- PB17MD_00, PB17MD_01, PB17MD_10, PB17MD_11,
- PB16MD_00, PB16MD_01, PB16MD_10, PB16MD_11,
- PB15MD_00, PB15MD_01, PB15MD_10, PB15MD_11,
- PB14MD_00, PB14MD_01, PB14MD_10, PB14MD_11,
- PB13MD_00, PB13MD_01, PB13MD_10, PB13MD_11,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
- PB3MD_0, PB3MD_1,
- PB2MD_0, PB2MD_1,
- PB1MD_0, PB1MD_1,
-
- /* Port C */
- PC14_IOR_IN, PC14_IOR_OUT,
- PC13_IOR_IN, PC13_IOR_OUT,
- PC12_IOR_IN, PC12_IOR_OUT,
- PC11_IOR_IN, PC11_IOR_OUT,
- PC10_IOR_IN, PC10_IOR_OUT,
- PC9_IOR_IN, PC9_IOR_OUT,
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC10MD_0, PC10MD_1,
- PC9MD_0, PC9MD_1,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11,
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11,
- PC4MD_0, PC4MD_1,
- PC3MD_0, PC3MD_1,
- PC2MD_0, PC2MD_1,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
- PE3MD_00, PE3MD_01, PE3MD_10, PE3MD_11,
- PE2MD_00, PE2MD_01, PE2MD_10, PE2MD_11,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11,
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, PG17MD_101, PG17MD_110, PG17MD_111,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, PG16MD_101, PG16MD_110, PG16MD_111,
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, PG15MD_101, PG15MD_110, PG15MD_111,
- PG14MD_000, PG14MD_001, PG14MD_010, PG14MD_011,
- PG14MD_100, PG14MD_101, PG14MD_110, PG14MD_111,
- PG13MD_000, PG13MD_001, PG13MD_010, PG13MD_011,
- PG13MD_100, PG13MD_101, PG13MD_110, PG13MD_111,
- PG12MD_000, PG12MD_001, PG12MD_010, PG12MD_011,
- PG12MD_100, PG12MD_101, PG12MD_110, PG12MD_111,
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11,
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_0, PH7MD_1,
- PH6MD_0, PH6MD_1,
- PH5MD_0, PH5MD_1,
- PH4MD_0, PH4MD_1,
- PH3MD_0, PH3MD_1,
- PH2MD_0, PH2MD_1,
- PH1MD_0, PH1MD_1,
- PH0MD_0, PH0MD_1,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ11MD_00, PJ11MD_01, PJ11MD_10, PJ11MD_11,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, PJ10MD_11,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, PJ9MD_11,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, PJ8MD_11,
- PJ7MD_00, PJ7MD_01, PJ7MD_10, PJ7MD_11,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, PJ6MD_11,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, PJ5MD_11,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, PJ4MD_11,
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- /* Port K */
- PK11_IOR_IN, PK11_IOR_OUT,
- PK10_IOR_IN, PK10_IOR_OUT,
- PK9_IOR_IN, PK9_IOR_OUT,
- PK8_IOR_IN, PK8_IOR_OUT,
- PK7_IOR_IN, PK7_IOR_OUT,
- PK6_IOR_IN, PK6_IOR_OUT,
- PK5_IOR_IN, PK5_IOR_OUT,
- PK4_IOR_IN, PK4_IOR_OUT,
- PK3_IOR_IN, PK3_IOR_OUT,
- PK2_IOR_IN, PK2_IOR_OUT,
- PK1_IOR_IN, PK1_IOR_OUT,
- PK0_IOR_IN, PK0_IOR_OUT,
-
- PK11MD_00, PK11MD_01, PK11MD_10, PK11MD_11,
- PK10MD_00, PK10MD_01, PK10MD_10, PK10MD_11,
- PK9MD_00, PK9MD_01, PK9MD_10, PK9MD_11,
- PK8MD_00, PK8MD_01, PK8MD_10, PK8MD_11,
- PK7MD_00, PK7MD_01, PK7MD_10, PK7MD_11,
- PK6MD_00, PK6MD_01, PK6MD_10, PK6MD_11,
- PK5MD_00, PK5MD_01, PK5MD_10, PK5MD_11,
- PK4MD_00, PK4MD_01, PK4MD_10, PK4MD_11,
- PK3MD_00, PK3MD_01, PK3MD_10, PK3MD_11,
- PK2MD_00, PK2MD_01, PK2MD_10, PK2MD_11,
- PK1MD_00, PK1MD_01, PK1MD_10, PK1MD_11,
- PK0MD_00, PK0MD_01, PK0MD_10, PK0MD_11,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port A */
-
- /* Port B */
-
- /* Port C */
-
- /* Port D */
-
- /* Port E */
-
- /* Port F */
-
- /* Port G */
-
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* Port I - not on device */
-
- /* Port J */
-
- /* Port K */
-
- IRQ7_PC_MARK, IRQ6_PC_MARK, IRQ5_PC_MARK, IRQ4_PC_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ3_PE_MARK, IRQ2_PE_MARK, IRQ1_PE_MARK, IRQ0_PE_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
-
- SD_CD_MARK, SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK,
- CRX0_MARK, CRX1_MARK,
- CTX0_MARK, CTX1_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
-
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
- IERXD_MARK, IETXD_MARK,
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS6CE1B_MARK, CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- ICIOWRAH_MARK,
- ICIORD_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, SCK1_MARK, SCK2_MARK, SCK3_MARK,
- RXD0_MARK, RXD1_MARK, RXD2_MARK, RXD3_MARK,
- TXD0_MARK, TXD1_MARK, TXD2_MARK, TXD3_MARK,
- RXD4_MARK, RXD5_MARK, RXD6_MARK, RXD7_MARK,
- TXD4_MARK, TXD5_MARK, TXD6_MARK, TXD7_MARK,
- RTS1_MARK, RTS3_MARK,
- CTS1_MARK, CTS3_MARK,
-
- /* RSPI */
- RSPCK0_MARK, RSPCK1_MARK,
- MOSI0_MARK, MOSI1_MARK,
- MISO0_PF12_MARK, MISO1_MARK, MISO1_PG19_MARK,
- SSL00_MARK, SSL10_MARK,
-
- /* IIC3 */
- SCL0_MARK, SCL1_MARK, SCL2_MARK,
- SDA0_MARK, SDA1_MARK, SDA2_MARK,
-
- /* SSI */
- SSISCK0_MARK,
- SSIWS0_MARK,
- SSITXD0_MARK,
- SSIRXD0_MARK,
- SSIWS1_MARK, SSIWS2_MARK, SSIWS3_MARK,
- SSISCK1_MARK, SSISCK2_MARK, SSISCK3_MARK,
- SSIDATA1_MARK, SSIDATA2_MARK, SSIDATA3_MARK,
- AUDIO_CLK_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* VDC3 */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA3_DATA, PA3_IN),
- PINMUX_DATA(PA2_DATA, PA2_IN),
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_00, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_01),
- PINMUX_DATA(CS4_MARK, PB22MD_10),
-
- PINMUX_DATA(PB21_DATA, PB21MD_0, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_1),
- PINMUX_DATA(A20_MARK, PB20MD_1),
- PINMUX_DATA(A19_MARK, PB19MD_01),
- PINMUX_DATA(A18_MARK, PB18MD_01),
- PINMUX_DATA(A17_MARK, PB17MD_01),
- PINMUX_DATA(A16_MARK, PB16MD_01),
- PINMUX_DATA(A15_MARK, PB15MD_01),
- PINMUX_DATA(A14_MARK, PB14MD_01),
- PINMUX_DATA(A13_MARK, PB13MD_01),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_1),
- PINMUX_DATA(A2_MARK, PB2MD_1),
- PINMUX_DATA(A1_MARK, PB1MD_1),
-
- /* Port C */
- PINMUX_DATA(PC10_DATA, PC10MD_0),
- PINMUX_DATA(TIOC2B_MARK, PC1MD_1),
- PINMUX_DATA(PC9_DATA, PC9MD_0),
- PINMUX_DATA(TIOC2A_MARK, PC9MD_1),
- PINMUX_DATA(PC8_DATA, PC8MD_00),
- PINMUX_DATA(CS3_MARK, PC8MD_01),
- PINMUX_DATA(TIOC4D_MARK, PC8MD_10),
- PINMUX_DATA(IRQ7_PC_MARK, PC8MD_11),
- PINMUX_DATA(PC7_DATA, PC7MD_00),
- PINMUX_DATA(CKE_MARK, PC7MD_01),
- PINMUX_DATA(TIOC4C_MARK, PC7MD_10),
- PINMUX_DATA(IRQ6_PC_MARK, PC7MD_11),
- PINMUX_DATA(PC6_DATA, PC6MD_00),
- PINMUX_DATA(CAS_MARK, PC6MD_01),
- PINMUX_DATA(TIOC4B_MARK, PC6MD_10),
- PINMUX_DATA(IRQ5_PC_MARK, PC6MD_11),
- PINMUX_DATA(PC5_DATA, PC5MD_00),
- PINMUX_DATA(RAS_MARK, PC5MD_01),
- PINMUX_DATA(TIOC4A_MARK, PC5MD_10),
- PINMUX_DATA(IRQ4_PC_MARK, PC5MD_11),
- PINMUX_DATA(PC4_DATA, PC4MD_0),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_1),
- PINMUX_DATA(PC3_DATA, PC3MD_0),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_1),
- PINMUX_DATA(PC2_DATA, PC2MD_0),
- PINMUX_DATA(RDWR_MARK, PC2MD_1),
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_00),
- PINMUX_DATA(SDA1_MARK, PE3MD_01),
- PINMUX_DATA(IRQ3_PE_MARK, PE3MD_11),
-
- PINMUX_DATA(PE2_DATA, PE2MD_00),
- PINMUX_DATA(SCL1_MARK, PE2MD_01),
- PINMUX_DATA(IRQ2_PE_MARK, PE2MD_11),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(IOIS16_MARK, PE1MD_010),
- PINMUX_DATA(IRQ1_PE_MARK, PE1MD_011),
- PINMUX_DATA(TCLKA_MARK, PE1MD_100),
- PINMUX_DATA(ADTRG_MARK, PE1MD_101),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(AUDIO_CLK_MARK, PE0MD_10),
- PINMUX_DATA(IRQ0_PE_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(BS_MARK, PF12MD_001),
- PINMUX_DATA(MISO0_PF12_MARK, PF12MD_011),
- PINMUX_DATA(TIOC3D_MARK, PF12MD_100),
- PINMUX_DATA(SPDIF_OUT_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(A25_MARK, PF11MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF11MD_010),
- PINMUX_DATA(MOSI0_MARK, PF11MD_011),
- PINMUX_DATA(TIOC3C_MARK, PF11MD_100),
- PINMUX_DATA(SPDIF_IN_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(A24_MARK, PF10MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF10MD_010),
- PINMUX_DATA(SSL00_MARK, PF10MD_011),
- PINMUX_DATA(TIOC3B_MARK, PF10MD_100),
- PINMUX_DATA(FCE_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(A23_MARK, PF9MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF9MD_010),
- PINMUX_DATA(RSPCK0_MARK, PF9MD_011),
- PINMUX_DATA(TIOC3A_MARK, PF9MD_100),
- PINMUX_DATA(FRB_MARK, PF9MD_101),
-
- PINMUX_DATA(PF8_DATA, PF8MD_00),
- PINMUX_DATA(CE2B_MARK, PF8MD_01),
- PINMUX_DATA(SSIDATA3_MARK, PF8MD_10),
- PINMUX_DATA(DV_CLK_MARK, PF8MD_11),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(CE2A_MARK, PF7MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF7MD_010),
- PINMUX_DATA(DV_DATA7_MARK, PF7MD_011),
- PINMUX_DATA(TCLKD_MARK, PF7MD_100),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CS6CE1B_MARK, PF6MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF6MD_010),
- PINMUX_DATA(DV_DATA6_MARK, PF6MD_011),
- PINMUX_DATA(TCLKB_MARK, PF6MD_100),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF5MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF5MD_010),
- PINMUX_DATA(DV_DATA5_MARK, PF5MD_011),
- PINMUX_DATA(TCLKC_MARK, PF5MD_100),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(ICIOWRAH_MARK, PF4MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF4MD_010),
- PINMUX_DATA(DV_DATA4_MARK, PF4MD_011),
- PINMUX_DATA(TXD3_MARK, PF4MD_100),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(ICIORD_MARK, PF3MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF3MD_010),
- PINMUX_DATA(DV_DATA3_MARK, PF3MD_011),
- PINMUX_DATA(RXD3_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(BACK_MARK, PF2MD_001),
- PINMUX_DATA(SSIDATA1_MARK, PF2MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF2MD_011),
- PINMUX_DATA(TXD2_MARK, PF2MD_100),
- PINMUX_DATA(DACK0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BREQ_MARK, PF1MD_001),
- PINMUX_DATA(SSIWS1_MARK, PF1MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF1MD_011),
- PINMUX_DATA(RXD2_MARK, PF1MD_100),
- PINMUX_DATA(DREQ0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(WAIT_MARK, PF0MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF0MD_010),
- PINMUX_DATA(DV_DATA0_MARK, PF0MD_011),
- PINMUX_DATA(SCK2_MARK, PF0MD_100),
- PINMUX_DATA(TEND0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(MOSI0_MARK, PG24MD_01),
- PINMUX_DATA(TIOC0D_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_00),
- PINMUX_DATA(MOSI1_MARK, PG23MD_01),
- PINMUX_DATA(TIOC0C_MARK, PG23MD_10),
-
- PINMUX_DATA(PG22_DATA, PG22MD_00),
- PINMUX_DATA(SSL10_MARK, PG22MD_01),
- PINMUX_DATA(TIOC0B_MARK, PG22MD_10),
-
- PINMUX_DATA(PG21_DATA, PG21MD_00),
- PINMUX_DATA(RSPCK1_MARK, PG21MD_01),
- PINMUX_DATA(TIOC0A_MARK, PG21MD_10),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG20MD_001),
- PINMUX_DATA(MISO1_MARK, PG20MD_011),
- PINMUX_DATA(TXD7_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(LCD_CLK_MARK, PG19MD_001),
- PINMUX_DATA(TIOC2B_MARK, PG19MD_010),
- PINMUX_DATA(MISO1_PG19_MARK, PG19MD_011),
- PINMUX_DATA(RXD7_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(LCD_DE_MARK, PG18MD_001),
- PINMUX_DATA(TIOC2A_MARK, PG18MD_010),
- PINMUX_DATA(SSL10_MARK, PG18MD_011),
- PINMUX_DATA(TXD6_MARK, PG18MD_100),
-
- PINMUX_DATA(PG17_DATA, PG17MD_000),
- PINMUX_DATA(LCD_HSYNC_MARK, PG17MD_001),
- PINMUX_DATA(TIOC1B_MARK, PG17MD_010),
- PINMUX_DATA(RSPCK1_MARK, PG17MD_011),
- PINMUX_DATA(RXD6_MARK, PG17MD_100),
-
- PINMUX_DATA(PG16_DATA, PG16MD_000),
- PINMUX_DATA(LCD_VSYNC_MARK, PG16MD_001),
- PINMUX_DATA(TIOC1A_MARK, PG16MD_010),
- PINMUX_DATA(TXD3_MARK, PG16MD_011),
- PINMUX_DATA(CTS1_MARK, PG16MD_100),
-
- PINMUX_DATA(PG15_DATA, PG15MD_000),
- PINMUX_DATA(LCD_DATA15_MARK, PG15MD_001),
- PINMUX_DATA(TIOC0D_MARK, PG15MD_010),
- PINMUX_DATA(RXD3_MARK, PG15MD_011),
- PINMUX_DATA(RTS1_MARK, PG15MD_100),
-
- PINMUX_DATA(PG14_DATA, PG14MD_000),
- PINMUX_DATA(LCD_DATA14_MARK, PG14MD_001),
- PINMUX_DATA(TIOC0C_MARK, PG14MD_010),
- PINMUX_DATA(SCK1_MARK, PG14MD_100),
-
- PINMUX_DATA(PG13_DATA, PG13MD_000),
- PINMUX_DATA(LCD_DATA13_MARK, PG13MD_001),
- PINMUX_DATA(TIOC0B_MARK, PG13MD_010),
- PINMUX_DATA(TXD1_MARK, PG13MD_100),
-
- PINMUX_DATA(PG12_DATA, PG12MD_000),
- PINMUX_DATA(LCD_DATA12_MARK, PG12MD_001),
- PINMUX_DATA(TIOC0A_MARK, PG12MD_010),
- PINMUX_DATA(RXD1_MARK, PG12MD_100),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(LCD_DATA11_MARK, PG11MD_001),
- PINMUX_DATA(SSITXD0_MARK, PG11MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TXD5_MARK, PG11MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PG11MD_101),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(LCD_DATA10_MARK, PG10MD_001),
- PINMUX_DATA(SSIRXD0_MARK, PG10MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG10MD_011),
- PINMUX_DATA(RXD5_MARK, PG10MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PG10MD_101),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(LCD_DATA9_MARK, PG9MD_001),
- PINMUX_DATA(SSIWS0_MARK, PG9MD_010),
- PINMUX_DATA(TXD4_MARK, PG9MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PG9MD_101),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(LCD_DATA8_MARK, PG8MD_001),
- PINMUX_DATA(SSISCK0_MARK, PG8MD_010),
- PINMUX_DATA(RXD4_MARK, PG8MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PG8MD_101),
-
- PINMUX_DATA(PG7_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA7_MARK, PG7MD_01),
- PINMUX_DATA(SD_CD_MARK, PG7MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG6_DATA, PG7MD_00),
- PINMUX_DATA(LCD_DATA6_MARK, PG7MD_01),
- PINMUX_DATA(SD_WP_MARK, PG7MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG7MD_11),
-
- PINMUX_DATA(PG5_DATA, PG5MD_00),
- PINMUX_DATA(LCD_DATA5_MARK, PG5MD_01),
- PINMUX_DATA(SD_D1_MARK, PG5MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG5MD_11),
-
- PINMUX_DATA(PG4_DATA, PG4MD_00),
- PINMUX_DATA(LCD_DATA4_MARK, PG4MD_01),
- PINMUX_DATA(SD_D0_MARK, PG4MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG4MD_11),
-
- PINMUX_DATA(PG3_DATA, PG3MD_00),
- PINMUX_DATA(LCD_DATA3_MARK, PG3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PG3MD_10),
- PINMUX_DATA(PINT3_PG_MARK, PG3MD_11),
-
- PINMUX_DATA(PG2_DATA, PG2MD_00),
- PINMUX_DATA(LCD_DATA2_MARK, PG2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PG2MD_10),
- PINMUX_DATA(PINT2_PG_MARK, PG2MD_11),
-
- PINMUX_DATA(PG1_DATA, PG1MD_00),
- PINMUX_DATA(LCD_DATA1_MARK, PG1MD_01),
- PINMUX_DATA(SD_D3_MARK, PG1MD_10),
- PINMUX_DATA(PINT1_PG_MARK, PG1MD_11),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(LCD_DATA0_MARK, PG0MD_001),
- PINMUX_DATA(SD_D2_MARK, PG0MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG0MD_011),
- PINMUX_DATA(WDTOVF_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_0),
- PINMUX_DATA(PHAN7_MARK, PH7MD_1),
-
- PINMUX_DATA(PH6_DATA, PH6MD_0),
- PINMUX_DATA(PHAN6_MARK, PH6MD_1),
-
- PINMUX_DATA(PH5_DATA, PH5MD_0),
- PINMUX_DATA(PHAN5_MARK, PH5MD_1),
-
- PINMUX_DATA(PH4_DATA, PH4MD_0),
- PINMUX_DATA(PHAN4_MARK, PH4MD_1),
-
- PINMUX_DATA(PH3_DATA, PH3MD_0),
- PINMUX_DATA(PHAN3_MARK, PH3MD_1),
-
- PINMUX_DATA(PH2_DATA, PH2MD_0),
- PINMUX_DATA(PHAN2_MARK, PH2MD_1),
-
- PINMUX_DATA(PH1_DATA, PH1MD_0),
- PINMUX_DATA(PHAN1_MARK, PH1MD_1),
-
- PINMUX_DATA(PH0_DATA, PH0MD_0),
- PINMUX_DATA(PHAN0_MARK, PH0MD_1),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ11_DATA, PJ11MD_00),
- PINMUX_DATA(PWM2H_MARK, PJ11MD_01),
- PINMUX_DATA(DACK1_MARK, PJ11MD_10),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_00),
- PINMUX_DATA(PWM2G_MARK, PJ10MD_01),
- PINMUX_DATA(DREQ1_MARK, PJ10MD_10),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_00),
- PINMUX_DATA(PWM2F_MARK, PJ9MD_01),
- PINMUX_DATA(TEND1_MARK, PJ9MD_10),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_00),
- PINMUX_DATA(PWM2E_MARK, PJ8MD_01),
- PINMUX_DATA(RTS3_MARK, PJ8MD_10),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_00),
- PINMUX_DATA(TIOC1B_MARK, PJ7MD_01),
- PINMUX_DATA(CTS3_MARK, PJ7MD_10),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_00),
- PINMUX_DATA(TIOC1A_MARK, PJ6MD_01),
- PINMUX_DATA(SCK3_MARK, PJ6MD_10),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_00),
- PINMUX_DATA(IERXD_MARK, PJ5MD_01),
- PINMUX_DATA(TXD3_MARK, PJ5MD_10),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_00),
- PINMUX_DATA(IETXD_MARK, PJ4MD_01),
- PINMUX_DATA(RXD3_MARK, PJ4MD_10),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_00),
- PINMUX_DATA(CRX1_MARK, PJ3MD_01),
- PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(CTX1_MARK, PJ2MD_001),
- PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010),
- PINMUX_DATA(CS2_MARK, PJ2MD_011),
- PINMUX_DATA(SCK0_MARK, PJ2MD_100),
- PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(CRX0_MARK, PJ1MD_001),
- PINMUX_DATA(IERXD_MARK, PJ1MD_010),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ1MD_011),
- PINMUX_DATA(RXD0_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(CTX0_MARK, PJ0MD_001),
- PINMUX_DATA(IERXD_MARK, PJ0MD_010),
- PINMUX_DATA(CS1_MARK, PJ0MD_011),
- PINMUX_DATA(TXD0_MARK, PJ0MD_100),
- PINMUX_DATA(A0_MARK, PJ0MD_101),
-
- /* Port K */
- PINMUX_DATA(PK11_DATA, PK11MD_00),
- PINMUX_DATA(PWM2D_MARK, PK11MD_01),
- PINMUX_DATA(SSITXD0_MARK, PK11MD_10),
-
- PINMUX_DATA(PK10_DATA, PK10MD_00),
- PINMUX_DATA(PWM2C_MARK, PK10MD_01),
- PINMUX_DATA(SSIRXD0_MARK, PK10MD_10),
-
- PINMUX_DATA(PK9_DATA, PK9MD_00),
- PINMUX_DATA(PWM2B_MARK, PK9MD_01),
- PINMUX_DATA(SSIWS0_MARK, PK9MD_10),
-
- PINMUX_DATA(PK8_DATA, PK8MD_00),
- PINMUX_DATA(PWM2A_MARK, PK8MD_01),
- PINMUX_DATA(SSISCK0_MARK, PK8MD_10),
-
- PINMUX_DATA(PK7_DATA, PK7MD_00),
- PINMUX_DATA(PWM1H_MARK, PK7MD_01),
- PINMUX_DATA(SD_CD_MARK, PK7MD_10),
-
- PINMUX_DATA(PK6_DATA, PK6MD_00),
- PINMUX_DATA(PWM1G_MARK, PK6MD_01),
- PINMUX_DATA(SD_WP_MARK, PK6MD_10),
-
- PINMUX_DATA(PK5_DATA, PK5MD_00),
- PINMUX_DATA(PWM1F_MARK, PK5MD_01),
- PINMUX_DATA(SD_D1_MARK, PK5MD_10),
-
- PINMUX_DATA(PK4_DATA, PK4MD_00),
- PINMUX_DATA(PWM1E_MARK, PK4MD_01),
- PINMUX_DATA(SD_D0_MARK, PK4MD_10),
-
- PINMUX_DATA(PK3_DATA, PK3MD_00),
- PINMUX_DATA(PWM1D_MARK, PK3MD_01),
- PINMUX_DATA(SD_CLK_MARK, PK3MD_10),
-
- PINMUX_DATA(PK2_DATA, PK2MD_00),
- PINMUX_DATA(PWM1C_MARK, PK2MD_01),
- PINMUX_DATA(SD_CMD_MARK, PK2MD_10),
-
- PINMUX_DATA(PK1_DATA, PK1MD_00),
- PINMUX_DATA(PWM1B_MARK, PK1MD_01),
- PINMUX_DATA(SD_D3_MARK, PK1MD_10),
-
- PINMUX_DATA(PK0_DATA, PK0MD_00),
- PINMUX_DATA(PWM1A_MARK, PK0MD_01),
- PINMUX_DATA(SD_D2_MARK, PK0MD_10),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC10),
- PINMUX_GPIO(PC9),
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* Port K */
- PINMUX_GPIO(PK11),
- PINMUX_GPIO(PK10),
- PINMUX_GPIO(PK9),
- PINMUX_GPIO(PK8),
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
-
- GPIO_FN(IRQ7_PC),
- GPIO_FN(IRQ6_PC),
- GPIO_FN(IRQ5_PC),
- GPIO_FN(IRQ4_PC),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ3_PE),
- GPIO_FN(IRQ2_PE),
- GPIO_FN(IRQ1_PE),
- GPIO_FN(IRQ0_PE),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0),
- GPIO_FN(CRX0_CRX1),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS6CE1B),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(ICIOWRAH),
- GPIO_FN(ICIORD),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK0),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(SCK1),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK2),
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK3),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
-
- /* RSPI */
- GPIO_FN(RSPCK0),
- GPIO_FN(MOSI0),
- GPIO_FN(MISO0_PF12),
- GPIO_FN(MISO1),
- GPIO_FN(SSL00),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1_PG19),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-12, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [12] */
- PA3_IN, PA3_OUT,
- PA2_IN, PA2_OUT,
- PA1_IN, PA1_OUT,
- PA0_IN, PA0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_00, PB22MD_01, PB22MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB21MD_0, PB21MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB20MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
-
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- 0, PB19MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB18MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB17MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB16MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- 0, PB15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- 0, PB11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- 0, PB7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- 0, PB3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
-
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PC10MD_0, PC10MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC9MD_0, PC9MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC8MD_00, PC8MD_01, PC8MD_10, PC8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_00, PC7MD_01, PC7MD_10, PC7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC6MD_00, PC6MD_01, PC6MD_10, PC6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC5MD_00, PC5MD_01, PC5MD_10, PC5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC4MD_0, PC4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_0, PC3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC2MD_0, PC2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [5] */
- PC10_IN, PC10_OUT,
- PC9_IN, PC9_OUT,
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- 0, PD15MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD14MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD13MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD12MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- 0, PD11MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD10MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD9MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD8MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- 0, PD7MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD6MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD5MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD4MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- 0, PD3MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD2MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD1MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PD0MD_01, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PECR1", 0xfffe388c, 16,
- GROUP(-8, 4, 4),
- GROUP(
- /* RESERVED [8] */
- PE5MD_00, PE5MD_01, 0, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE4MD_00, PE4MD_01, 0, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_00, PE3MD_01, 0, PE3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE2MD_00, PE2MD_01, 0, PE2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-10, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [10] */
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF12MD_000, PF12MD_001, 0, PF12MD_011,
- PF12MD_100, PF12MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF8MD_00, PF8MD_01, PF8MD_10, PF8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR7", 0xfffe38c0, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PGCR6", 0xfffe38c2, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_00, PG23MD_01, PG23MD_10, PG23MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG22MD_00, PG22MD_01, PG22MD_10, PG22MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG21MD_00, PG21MD_01, PG21MD_10, PG21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG17MD_000, PG17MD_001, PG17MD_010, PG17MD_011,
- PG17MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG16MD_000, PG16MD_001, PG16MD_010, PG16MD_011,
- PG16MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_000, PG15MD_001, PG15MD_010, PG15MD_011,
- PG15MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG14MD_000, PG14MD_001, PG14MD_010, 0,
- PG14MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG13MD_000, PG13MD_001, PG13MD_010, 0,
- PG13MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG12MD_000, PG12MD_001, PG12MD_010, 0,
- PG12MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_00, PG7MD_01, PG7MD_10, PG7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG6MD_00, PG6MD_01, PG6MD_10, PG6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG5MD_00, PG5MD_01, PG5MD_10, PG5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG4MD_00, PG4MD_01, PG4MD_10, PG4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR0", 0xfffe38ce, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PG3MD_00, PG3MD_01, PG3MD_10, PG3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG2MD_00, PG2MD_01, PG2MD_10, PG2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG1MD_00, PG1MD_01, PG1MD_10, PG1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG_VAR("PGIOR1", 0xfffe38d0, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
-
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT
- ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_0, PH7MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH6MD_0, PH6MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH5MD_0, PH5MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH4MD_0, PH4MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_0, PH3MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH2MD_0, PH2MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH1MD_0, PH1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PH0MD_0, PH0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_00, PJ11MD_01, PJ11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ10MD_00, PJ10MD_01, PJ10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ9MD_00, PJ9MD_01, PJ9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ8MD_00, PJ8MD_01, PJ8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_00, PJ7MD_01, PJ7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ6MD_00, PJ6MD_01, PJ6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ5MD_00, PJ5MD_01, PJ5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ4MD_00, PJ4MD_01, PJ4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_00, PJ3MD_01, PJ3MD_10, PJ3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- { PINMUX_CFG_REG("PKCR2", 0xfffe392a, 16, 4, GROUP(
- PK11MD_00, PK11MD_01, PK11MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK10MD_00, PK10MD_01, PK10MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK9MD_00, PK9MD_01, PK9MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK8MD_00, PK8MD_01, PK8MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKCR1", 0xfffe392c, 16, 4, GROUP(
- PK7MD_00, PK7MD_01, PK7MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK6MD_00, PK6MD_01, PK6MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK5MD_00, PK5MD_01, PK5MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK4MD_00, PK4MD_01, PK4MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PKCR0", 0xfffe392e, 16, 4, GROUP(
- PK3MD_00, PK3MD_01, PK3MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK2MD_00, PK2MD_01, PK2MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK1MD_00, PK1MD_01, PK1MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK0MD_00, PK0MD_01, PK0MD_10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PKIOR0", 0xfffe3932, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PK11_IN, PK11_OUT,
- PK10_IN, PK10_OUT,
- PK9_IN, PK9_OUT,
- PK8_IN, PK8_OUT,
- PK7_IN, PK7_OUT,
- PK6_IN, PK6_OUT,
- PK5_IN, PK5_OUT,
- PK4_IN, PK4_OUT,
- PK3_IN, PK3_OUT,
- PK2_IN, PK2_OUT,
- PK1_IN, PK1_OUT,
- PK0_IN, PK0_OUT ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR1", 0xfffe3814, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA3_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA2_DATA ))
- },
-
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, PC10_DATA, PC9_DATA, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- 0, 0, 0, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- 0, 0, 0, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR0", 0xfffe3936, 16, GROUP(
- 0, 0, 0, PK12_DATA,
- PK11_DATA, PK10_DATA, PK9_DATA, PK8_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { }
-};
-
-const struct sh_pfc_soc_info sh7264_pinmux_info = {
- .name = "sh7264_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7269.c b/drivers/pinctrl/renesas/pfc-sh7269.c
deleted file mode 100644
index f59f558d75ae25..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7269.c
+++ /dev/null
@@ -1,2851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7269 Pinmux
- *
- * Copyright (C) 2012 Renesas Electronics Europe Ltd
- * Copyright (C) 2012 Phil Edworthy
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7269.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- /* Port A */
- PA1_DATA, PA0_DATA,
- /* Port B */
- PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA,
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA,
- /* Port C */
- PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- /* Port D */
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- /* Port E */
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- /* Port F */
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA,
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- /* Port G */
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA,
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- /* Port H */
- /* NOTE - Port H does not have a Data Register, but PH Data is
- connected to PH Port Register */
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- /* Port I - not on device */
- /* Port J */
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA,
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- FORCE_IN,
- /* Port A */
- PA1_IN, PA0_IN,
- /* Port B */
- PB22_IN, PB21_IN, PB20_IN,
- PB19_IN, PB18_IN, PB17_IN, PB16_IN,
- PB15_IN, PB14_IN, PB13_IN, PB12_IN,
- PB11_IN, PB10_IN, PB9_IN, PB8_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN,
- /* Port C */
- PC8_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- /* Port D */
- PD15_IN, PD14_IN, PD13_IN, PD12_IN,
- PD11_IN, PD10_IN, PD9_IN, PD8_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- /* Port E */
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- /* Port F */
- PF23_IN, PF22_IN, PF21_IN, PF20_IN,
- PF19_IN, PF18_IN, PF17_IN, PF16_IN,
- PF15_IN, PF14_IN, PF13_IN, PF12_IN,
- PF11_IN, PF10_IN, PF9_IN, PF8_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- /* Port G */
- PG27_IN, PG26_IN, PG25_IN, PG24_IN,
- PG23_IN, PG22_IN, PG21_IN, PG20_IN,
- PG19_IN, PG18_IN, PG17_IN, PG16_IN,
- PG15_IN, PG14_IN, PG13_IN, PG12_IN,
- PG11_IN, PG10_IN, PG9_IN, PG8_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_IN, PJ30_IN, PJ29_IN, PJ28_IN,
- PJ27_IN, PJ26_IN, PJ25_IN, PJ24_IN,
- PJ23_IN, PJ22_IN, PJ21_IN, PJ20_IN,
- PJ19_IN, PJ18_IN, PJ17_IN, PJ16_IN,
- PJ15_IN, PJ14_IN, PJ13_IN, PJ12_IN,
- PJ11_IN, PJ10_IN, PJ9_IN, PJ8_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- FORCE_OUT,
- /* Port A */
- PA1_OUT, PA0_OUT,
- /* Port B */
- PB22_OUT, PB21_OUT, PB20_OUT,
- PB19_OUT, PB18_OUT, PB17_OUT, PB16_OUT,
- PB15_OUT, PB14_OUT, PB13_OUT, PB12_OUT,
- PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT,
- /* Port C */
- PC8_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- /* Port D */
- PD15_OUT, PD14_OUT, PD13_OUT, PD12_OUT,
- PD11_OUT, PD10_OUT, PD9_OUT, PD8_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- /* Port E */
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- /* Port F */
- PF23_OUT, PF22_OUT, PF21_OUT, PF20_OUT,
- PF19_OUT, PF18_OUT, PF17_OUT, PF16_OUT,
- PF15_OUT, PF14_OUT, PF13_OUT, PF12_OUT,
- PF11_OUT, PF10_OUT, PF9_OUT, PF8_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- /* Port G */
- PG27_OUT, PG26_OUT, PG25_OUT, PG24_OUT,
- PG23_OUT, PG22_OUT, PG21_OUT, PG20_OUT,
- PG19_OUT, PG18_OUT, PG17_OUT, PG16_OUT,
- PG15_OUT, PG14_OUT, PG13_OUT, PG12_OUT,
- PG11_OUT, PG10_OUT, PG9_OUT, PG8_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- /* Port H - Port H does not have a Data Register */
- /* Port I - not on device */
- /* Port J */
- PJ31_OUT, PJ30_OUT, PJ29_OUT, PJ28_OUT,
- PJ27_OUT, PJ26_OUT, PJ25_OUT, PJ24_OUT,
- PJ23_OUT, PJ22_OUT, PJ21_OUT, PJ20_OUT,
- PJ19_OUT, PJ18_OUT, PJ17_OUT, PJ16_OUT,
- PJ15_OUT, PJ14_OUT, PJ13_OUT, PJ12_OUT,
- PJ11_OUT, PJ10_OUT, PJ9_OUT, PJ8_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- /* Port A */
- PA1_IOR_IN, PA1_IOR_OUT,
- PA0_IOR_IN, PA0_IOR_OUT,
-
- /* Port B */
- PB22_IOR_IN, PB22_IOR_OUT,
- PB21_IOR_IN, PB21_IOR_OUT,
- PB20_IOR_IN, PB20_IOR_OUT,
- PB19_IOR_IN, PB19_IOR_OUT,
- PB18_IOR_IN, PB18_IOR_OUT,
- PB17_IOR_IN, PB17_IOR_OUT,
- PB16_IOR_IN, PB16_IOR_OUT,
-
- PB15_IOR_IN, PB15_IOR_OUT,
- PB14_IOR_IN, PB14_IOR_OUT,
- PB13_IOR_IN, PB13_IOR_OUT,
- PB12_IOR_IN, PB12_IOR_OUT,
- PB11_IOR_IN, PB11_IOR_OUT,
- PB10_IOR_IN, PB10_IOR_OUT,
- PB9_IOR_IN, PB9_IOR_OUT,
- PB8_IOR_IN, PB8_IOR_OUT,
-
- PB7_IOR_IN, PB7_IOR_OUT,
- PB6_IOR_IN, PB6_IOR_OUT,
- PB5_IOR_IN, PB5_IOR_OUT,
- PB4_IOR_IN, PB4_IOR_OUT,
- PB3_IOR_IN, PB3_IOR_OUT,
- PB2_IOR_IN, PB2_IOR_OUT,
- PB1_IOR_IN, PB1_IOR_OUT,
- PB0_IOR_IN, PB0_IOR_OUT,
-
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11,
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11,
-
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11,
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11,
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11,
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11,
-
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11,
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11,
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11,
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11,
-
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11,
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11,
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11,
-
- /* Port C */
- PC8_IOR_IN, PC8_IOR_OUT,
- PC7_IOR_IN, PC7_IOR_OUT,
- PC6_IOR_IN, PC6_IOR_OUT,
- PC5_IOR_IN, PC5_IOR_OUT,
- PC4_IOR_IN, PC4_IOR_OUT,
- PC3_IOR_IN, PC3_IOR_OUT,
- PC2_IOR_IN, PC2_IOR_OUT,
- PC1_IOR_IN, PC1_IOR_OUT,
- PC0_IOR_IN, PC0_IOR_OUT,
-
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11,
-
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11,
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11,
- PC1MD_0, PC1MD_1,
- PC0MD_0, PC0MD_1,
-
- /* Port D */
- PD15_IOR_IN, PD15_IOR_OUT,
- PD14_IOR_IN, PD14_IOR_OUT,
- PD13_IOR_IN, PD13_IOR_OUT,
- PD12_IOR_IN, PD12_IOR_OUT,
- PD11_IOR_IN, PD11_IOR_OUT,
- PD10_IOR_IN, PD10_IOR_OUT,
- PD9_IOR_IN, PD9_IOR_OUT,
- PD8_IOR_IN, PD8_IOR_OUT,
- PD7_IOR_IN, PD7_IOR_OUT,
- PD6_IOR_IN, PD6_IOR_OUT,
- PD5_IOR_IN, PD5_IOR_OUT,
- PD4_IOR_IN, PD4_IOR_OUT,
- PD3_IOR_IN, PD3_IOR_OUT,
- PD2_IOR_IN, PD2_IOR_OUT,
- PD1_IOR_IN, PD1_IOR_OUT,
- PD0_IOR_IN, PD0_IOR_OUT,
-
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11,
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11,
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11,
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11,
-
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11,
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11,
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11,
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11,
-
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11,
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11,
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11,
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11,
-
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11,
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11,
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11,
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11,
-
- /* Port E */
- PE7_IOR_IN, PE7_IOR_OUT,
- PE6_IOR_IN, PE6_IOR_OUT,
- PE5_IOR_IN, PE5_IOR_OUT,
- PE4_IOR_IN, PE4_IOR_OUT,
- PE3_IOR_IN, PE3_IOR_OUT,
- PE2_IOR_IN, PE2_IOR_OUT,
- PE1_IOR_IN, PE1_IOR_OUT,
- PE0_IOR_IN, PE0_IOR_OUT,
-
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11,
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11,
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11,
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11,
-
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11,
-
- /* Port F */
- PF23_IOR_IN, PF23_IOR_OUT,
- PF22_IOR_IN, PF22_IOR_OUT,
- PF21_IOR_IN, PF21_IOR_OUT,
- PF20_IOR_IN, PF20_IOR_OUT,
- PF19_IOR_IN, PF19_IOR_OUT,
- PF18_IOR_IN, PF18_IOR_OUT,
- PF17_IOR_IN, PF17_IOR_OUT,
- PF16_IOR_IN, PF16_IOR_OUT,
- PF15_IOR_IN, PF15_IOR_OUT,
- PF14_IOR_IN, PF14_IOR_OUT,
- PF13_IOR_IN, PF13_IOR_OUT,
- PF12_IOR_IN, PF12_IOR_OUT,
- PF11_IOR_IN, PF11_IOR_OUT,
- PF10_IOR_IN, PF10_IOR_OUT,
- PF9_IOR_IN, PF9_IOR_OUT,
- PF8_IOR_IN, PF8_IOR_OUT,
- PF7_IOR_IN, PF7_IOR_OUT,
- PF6_IOR_IN, PF6_IOR_OUT,
- PF5_IOR_IN, PF5_IOR_OUT,
- PF4_IOR_IN, PF4_IOR_OUT,
- PF3_IOR_IN, PF3_IOR_OUT,
- PF2_IOR_IN, PF2_IOR_OUT,
- PF1_IOR_IN, PF1_IOR_OUT,
- PF0_IOR_IN, PF0_IOR_OUT,
-
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
-
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
-
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
-
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
-
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
-
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
-
- /* Port G */
- PG27_IOR_IN, PG27_IOR_OUT,
- PG26_IOR_IN, PG26_IOR_OUT,
- PG25_IOR_IN, PG25_IOR_OUT,
- PG24_IOR_IN, PG24_IOR_OUT,
- PG23_IOR_IN, PG23_IOR_OUT,
- PG22_IOR_IN, PG22_IOR_OUT,
- PG21_IOR_IN, PG21_IOR_OUT,
- PG20_IOR_IN, PG20_IOR_OUT,
- PG19_IOR_IN, PG19_IOR_OUT,
- PG18_IOR_IN, PG18_IOR_OUT,
- PG17_IOR_IN, PG17_IOR_OUT,
- PG16_IOR_IN, PG16_IOR_OUT,
- PG15_IOR_IN, PG15_IOR_OUT,
- PG14_IOR_IN, PG14_IOR_OUT,
- PG13_IOR_IN, PG13_IOR_OUT,
- PG12_IOR_IN, PG12_IOR_OUT,
- PG11_IOR_IN, PG11_IOR_OUT,
- PG10_IOR_IN, PG10_IOR_OUT,
- PG9_IOR_IN, PG9_IOR_OUT,
- PG8_IOR_IN, PG8_IOR_OUT,
- PG7_IOR_IN, PG7_IOR_OUT,
- PG6_IOR_IN, PG6_IOR_OUT,
- PG5_IOR_IN, PG5_IOR_OUT,
- PG4_IOR_IN, PG4_IOR_OUT,
- PG3_IOR_IN, PG3_IOR_OUT,
- PG2_IOR_IN, PG2_IOR_OUT,
- PG1_IOR_IN, PG1_IOR_OUT,
- PG0_IOR_IN, PG0_IOR_OUT,
-
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11,
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11,
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11,
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11,
-
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
-
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11,
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11,
-
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11,
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11,
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11,
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11,
-
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
-
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
-
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
-
- /* Port H */
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11,
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11,
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11,
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11,
-
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11,
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11,
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11,
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11,
-
- /* Port I - not on device */
-
- /* Port J */
- PJ31_IOR_IN, PJ31_IOR_OUT,
- PJ30_IOR_IN, PJ30_IOR_OUT,
- PJ29_IOR_IN, PJ29_IOR_OUT,
- PJ28_IOR_IN, PJ28_IOR_OUT,
- PJ27_IOR_IN, PJ27_IOR_OUT,
- PJ26_IOR_IN, PJ26_IOR_OUT,
- PJ25_IOR_IN, PJ25_IOR_OUT,
- PJ24_IOR_IN, PJ24_IOR_OUT,
- PJ23_IOR_IN, PJ23_IOR_OUT,
- PJ22_IOR_IN, PJ22_IOR_OUT,
- PJ21_IOR_IN, PJ21_IOR_OUT,
- PJ20_IOR_IN, PJ20_IOR_OUT,
- PJ19_IOR_IN, PJ19_IOR_OUT,
- PJ18_IOR_IN, PJ18_IOR_OUT,
- PJ17_IOR_IN, PJ17_IOR_OUT,
- PJ16_IOR_IN, PJ16_IOR_OUT,
- PJ15_IOR_IN, PJ15_IOR_OUT,
- PJ14_IOR_IN, PJ14_IOR_OUT,
- PJ13_IOR_IN, PJ13_IOR_OUT,
- PJ12_IOR_IN, PJ12_IOR_OUT,
- PJ11_IOR_IN, PJ11_IOR_OUT,
- PJ10_IOR_IN, PJ10_IOR_OUT,
- PJ9_IOR_IN, PJ9_IOR_OUT,
- PJ8_IOR_IN, PJ8_IOR_OUT,
- PJ7_IOR_IN, PJ7_IOR_OUT,
- PJ6_IOR_IN, PJ6_IOR_OUT,
- PJ5_IOR_IN, PJ5_IOR_OUT,
- PJ4_IOR_IN, PJ4_IOR_OUT,
- PJ3_IOR_IN, PJ3_IOR_OUT,
- PJ2_IOR_IN, PJ2_IOR_OUT,
- PJ1_IOR_IN, PJ1_IOR_OUT,
- PJ0_IOR_IN, PJ0_IOR_OUT,
-
- PJ31MD_0, PJ31MD_1,
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
-
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
-
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
-
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
-
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
-
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
-
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
-
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* Port H */
- PHAN7_MARK, PHAN6_MARK, PHAN5_MARK, PHAN4_MARK,
- PHAN3_MARK, PHAN2_MARK, PHAN1_MARK, PHAN0_MARK,
-
- /* IRQs */
- IRQ7_PG_MARK, IRQ6_PG_MARK, IRQ5_PG_MARK, IRQ4_PG_MARK,
- IRQ3_PG_MARK, IRQ2_PG_MARK, IRQ1_PG_MARK, IRQ0_PG_MARK,
- IRQ7_PF_MARK, IRQ6_PF_MARK, IRQ5_PF_MARK, IRQ4_PF_MARK,
- IRQ3_PJ_MARK, IRQ2_PJ_MARK, IRQ1_PJ_MARK, IRQ0_PJ_MARK,
- IRQ1_PC_MARK, IRQ0_PC_MARK,
-
- PINT7_PG_MARK, PINT6_PG_MARK, PINT5_PG_MARK, PINT4_PG_MARK,
- PINT3_PG_MARK, PINT2_PG_MARK, PINT1_PG_MARK, PINT0_PG_MARK,
- PINT7_PH_MARK, PINT6_PH_MARK, PINT5_PH_MARK, PINT4_PH_MARK,
- PINT3_PH_MARK, PINT2_PH_MARK, PINT1_PH_MARK, PINT0_PH_MARK,
- PINT7_PJ_MARK, PINT6_PJ_MARK, PINT5_PJ_MARK, PINT4_PJ_MARK,
- PINT3_PJ_MARK, PINT2_PJ_MARK, PINT1_PJ_MARK, PINT0_PJ_MARK,
-
- /* SD */
- SD_D0_MARK, SD_D1_MARK, SD_D2_MARK, SD_D3_MARK,
- SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, SD_CD_MARK,
-
- /* MMC */
- MMC_D0_MARK, MMC_D1_MARK, MMC_D2_MARK, MMC_D3_MARK,
- MMC_D4_MARK, MMC_D5_MARK, MMC_D6_MARK, MMC_D7_MARK,
- MMC_CLK_MARK, MMC_CMD_MARK, MMC_CD_MARK,
-
- /* PWM */
- PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
- PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
- PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
- PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
-
- /* IEBus */
- IERXD_MARK, IETXD_MARK,
-
- /* WDT */
- WDTOVF_MARK,
-
- /* DMAC */
- TEND0_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, DACK1_MARK, DREQ1_MARK,
-
- /* ADC */
- ADTRG_MARK,
-
- /* BSC */
- A25_MARK, A24_MARK,
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
- BS_MARK,
- CS4_MARK, CS3_MARK, CS2_MARK, CS1_MARK, CS0_MARK,
- CS5CE1A_MARK,
- CE2A_MARK, CE2B_MARK,
- RD_MARK, RDWR_MARK,
- WE3ICIOWRAHDQMUU_MARK,
- WE2ICIORDDQMUL_MARK,
- WE1DQMUWE_MARK,
- WE0DQML_MARK,
- RAS_MARK, CAS_MARK, CKE_MARK,
- WAIT_MARK, BREQ_MARK, BACK_MARK, IOIS16_MARK,
-
- /* TMU */
- TIOC0A_MARK, TIOC0B_MARK, TIOC0C_MARK, TIOC0D_MARK,
- TIOC1A_MARK, TIOC1B_MARK,
- TIOC2A_MARK, TIOC2B_MARK,
- TIOC3A_MARK, TIOC3B_MARK, TIOC3C_MARK, TIOC3D_MARK,
- TIOC4A_MARK, TIOC4B_MARK, TIOC4C_MARK, TIOC4D_MARK,
- TCLKA_MARK, TCLKB_MARK, TCLKC_MARK, TCLKD_MARK,
-
- /* SCIF */
- SCK0_MARK, RXD0_MARK, TXD0_MARK,
- SCK1_MARK, RXD1_MARK, TXD1_MARK, RTS1_MARK, CTS1_MARK,
- SCK2_MARK, RXD2_MARK, TXD2_MARK,
- SCK3_MARK, RXD3_MARK, TXD3_MARK,
- SCK4_MARK, RXD4_MARK, TXD4_MARK,
- SCK5_MARK, RXD5_MARK, TXD5_MARK, RTS5_MARK, CTS5_MARK,
- SCK6_MARK, RXD6_MARK, TXD6_MARK,
- SCK7_MARK, RXD7_MARK, TXD7_MARK, RTS7_MARK, CTS7_MARK,
-
- /* RSPI */
- MISO0_PB20_MARK, MOSI0_PB19_MARK, SSL00_PB18_MARK, RSPCK0_PB17_MARK,
- MISO0_PJ19_MARK, MOSI0_PJ18_MARK, SSL00_PJ17_MARK, RSPCK0_PJ16_MARK,
- MISO1_MARK, MOSI1_MARK, SSL10_MARK, RSPCK1_MARK,
-
- /* IIC3 */
- SCL0_MARK, SDA0_MARK,
- SCL1_MARK, SDA1_MARK,
- SCL2_MARK, SDA2_MARK,
- SCL3_MARK, SDA3_MARK,
-
- /* SSI */
- SSISCK0_MARK, SSIWS0_MARK, SSITXD0_MARK, SSIRXD0_MARK,
- SSISCK1_MARK, SSIWS1_MARK, SSIDATA1_MARK,
- SSISCK2_MARK, SSIWS2_MARK, SSIDATA2_MARK,
- SSISCK3_MARK, SSIWS3_MARK, SSIDATA3_MARK,
- SSISCK4_MARK, SSIWS4_MARK, SSIDATA4_MARK,
- SSISCK5_MARK, SSIWS5_MARK, SSIDATA5_MARK,
- AUDIO_CLK_MARK,
- AUDIO_XOUT_MARK,
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- SIOFTXD_MARK, SIOFRXD_MARK, SIOFSYNC_MARK, SIOFSCK_MARK,
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- SPDIF_IN_MARK, SPDIF_OUT_MARK,
- SPDIF_IN_PJ24_MARK, SPDIF_OUT_PJ25_MARK,
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- FCE_MARK,
- FRB_MARK,
-
- /* CAN */
- CRX0_MARK, CTX0_MARK,
- CRX1_MARK, CTX1_MARK,
- CRX2_MARK, CTX2_MARK,
- CRX0_CRX1_MARK, CTX0_CTX1_MARK,
- CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
- CRX1_PJ22_MARK, CTX1_PJ23_MARK,
- CRX2_PJ20_MARK, CTX2_PJ21_MARK,
- CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
- CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
-
- /* VDC */
- DV_CLK_MARK,
- DV_VSYNC_MARK, DV_HSYNC_MARK,
- DV_DATA23_MARK, DV_DATA22_MARK, DV_DATA21_MARK, DV_DATA20_MARK,
- DV_DATA19_MARK, DV_DATA18_MARK, DV_DATA17_MARK, DV_DATA16_MARK,
- DV_DATA15_MARK, DV_DATA14_MARK, DV_DATA13_MARK, DV_DATA12_MARK,
- DV_DATA11_MARK, DV_DATA10_MARK, DV_DATA9_MARK, DV_DATA8_MARK,
- DV_DATA7_MARK, DV_DATA6_MARK, DV_DATA5_MARK, DV_DATA4_MARK,
- DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK,
- LCD_CLK_MARK, LCD_EXTCLK_MARK,
- LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK,
- LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK,
- LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK,
- LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK,
- LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK,
- LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK,
- LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK,
- LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK,
- LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK,
- LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK,
- LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK,
- LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK,
- LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK,
- LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK,
- LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK,
- LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK,
- LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK,
- LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK,
- LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK,
- LCD_M_DISP_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* Port A */
- PINMUX_DATA(PA1_DATA, PA1_IN),
- PINMUX_DATA(PA0_DATA, PA0_IN),
-
- /* Port B */
- PINMUX_DATA(PB22_DATA, PB22MD_000, PB22_IN, PB22_OUT),
- PINMUX_DATA(A22_MARK, PB22MD_001),
- PINMUX_DATA(CTX2_MARK, PB22MD_010),
- PINMUX_DATA(IETXD_MARK, PB22MD_011),
- PINMUX_DATA(CS4_MARK, PB22MD_100),
-
- PINMUX_DATA(PB21_DATA, PB21MD_00, PB21_IN, PB21_OUT),
- PINMUX_DATA(A21_MARK, PB21MD_01),
- PINMUX_DATA(CRX2_MARK, PB21MD_10),
- PINMUX_DATA(IERXD_MARK, PB21MD_11),
-
- PINMUX_DATA(A20_MARK, PB20MD_001),
- PINMUX_DATA(A19_MARK, PB19MD_001),
- PINMUX_DATA(A18_MARK, PB18MD_001),
- PINMUX_DATA(A17_MARK, PB17MD_001),
- PINMUX_DATA(A16_MARK, PB16MD_001),
- PINMUX_DATA(A15_MARK, PB15MD_001),
- PINMUX_DATA(A14_MARK, PB14MD_001),
- PINMUX_DATA(A13_MARK, PB13MD_001),
- PINMUX_DATA(A12_MARK, PB12MD_01),
- PINMUX_DATA(A11_MARK, PB11MD_01),
- PINMUX_DATA(A10_MARK, PB10MD_01),
- PINMUX_DATA(A9_MARK, PB9MD_01),
- PINMUX_DATA(A8_MARK, PB8MD_01),
- PINMUX_DATA(A7_MARK, PB7MD_01),
- PINMUX_DATA(A6_MARK, PB6MD_01),
- PINMUX_DATA(A5_MARK, PB5MD_01),
- PINMUX_DATA(A4_MARK, PB4MD_01),
- PINMUX_DATA(A3_MARK, PB3MD_01),
- PINMUX_DATA(A2_MARK, PB2MD_01),
- PINMUX_DATA(A1_MARK, PB1MD_01),
-
- /* Port C */
- PINMUX_DATA(PC8_DATA, PC8MD_000),
- PINMUX_DATA(CS3_MARK, PC8MD_001),
- PINMUX_DATA(TXD7_MARK, PC8MD_010),
- PINMUX_DATA(CTX1_MARK, PC8MD_011),
- PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
-
- PINMUX_DATA(PC7_DATA, PC7MD_000),
- PINMUX_DATA(CKE_MARK, PC7MD_001),
- PINMUX_DATA(RXD7_MARK, PC7MD_010),
- PINMUX_DATA(CRX1_MARK, PC7MD_011),
- PINMUX_DATA(CRX0_CRX1_MARK, PC7MD_100),
- PINMUX_DATA(IRQ1_PC_MARK, PC7MD_101),
-
- PINMUX_DATA(PC6_DATA, PC6MD_000),
- PINMUX_DATA(CAS_MARK, PC6MD_001),
- PINMUX_DATA(SCK7_MARK, PC6MD_010),
- PINMUX_DATA(CTX0_MARK, PC6MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
-
- PINMUX_DATA(PC5_DATA, PC5MD_000),
- PINMUX_DATA(RAS_MARK, PC5MD_001),
- PINMUX_DATA(CRX0_MARK, PC5MD_011),
- PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
- PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
-
- PINMUX_DATA(PC4_DATA, PC4MD_00),
- PINMUX_DATA(WE1DQMUWE_MARK, PC4MD_01),
- PINMUX_DATA(TXD6_MARK, PC4MD_10),
-
- PINMUX_DATA(PC3_DATA, PC3MD_00),
- PINMUX_DATA(WE0DQML_MARK, PC3MD_01),
- PINMUX_DATA(RXD6_MARK, PC3MD_10),
-
- PINMUX_DATA(PC2_DATA, PC2MD_00),
- PINMUX_DATA(RDWR_MARK, PC2MD_01),
- PINMUX_DATA(SCK5_MARK, PC2MD_10),
-
- PINMUX_DATA(PC1_DATA, PC1MD_0),
- PINMUX_DATA(RD_MARK, PC1MD_1),
-
- PINMUX_DATA(PC0_DATA, PC0MD_0),
- PINMUX_DATA(CS0_MARK, PC0MD_1),
-
- /* Port D */
- PINMUX_DATA(D15_MARK, PD15MD_01),
- PINMUX_DATA(D14_MARK, PD14MD_01),
-
- PINMUX_DATA(PD13_DATA, PD13MD_00),
- PINMUX_DATA(D13_MARK, PD13MD_01),
- PINMUX_DATA(PWM2F_MARK, PD13MD_10),
-
- PINMUX_DATA(PD12_DATA, PD12MD_00),
- PINMUX_DATA(D12_MARK, PD12MD_01),
- PINMUX_DATA(PWM2E_MARK, PD12MD_10),
-
- PINMUX_DATA(D11_MARK, PD11MD_01),
- PINMUX_DATA(D10_MARK, PD10MD_01),
- PINMUX_DATA(D9_MARK, PD9MD_01),
- PINMUX_DATA(D8_MARK, PD8MD_01),
- PINMUX_DATA(D7_MARK, PD7MD_01),
- PINMUX_DATA(D6_MARK, PD6MD_01),
- PINMUX_DATA(D5_MARK, PD5MD_01),
- PINMUX_DATA(D4_MARK, PD4MD_01),
- PINMUX_DATA(D3_MARK, PD3MD_01),
- PINMUX_DATA(D2_MARK, PD2MD_01),
- PINMUX_DATA(D1_MARK, PD1MD_01),
- PINMUX_DATA(D0_MARK, PD0MD_01),
-
- /* Port E */
- PINMUX_DATA(PE7_DATA, PE7MD_00),
- PINMUX_DATA(SDA3_MARK, PE7MD_01),
- PINMUX_DATA(RXD7_MARK, PE7MD_10),
-
- PINMUX_DATA(PE6_DATA, PE6MD_00),
- PINMUX_DATA(SCL3_MARK, PE6MD_01),
- PINMUX_DATA(RXD6_MARK, PE6MD_10),
-
- PINMUX_DATA(PE5_DATA, PE5MD_00),
- PINMUX_DATA(SDA2_MARK, PE5MD_01),
- PINMUX_DATA(RXD5_MARK, PE5MD_10),
- PINMUX_DATA(DV_HSYNC_MARK, PE5MD_11),
-
- PINMUX_DATA(PE4_DATA, PE4MD_00),
- PINMUX_DATA(SCL2_MARK, PE4MD_01),
- PINMUX_DATA(DV_VSYNC_MARK, PE4MD_11),
-
- PINMUX_DATA(PE3_DATA, PE3MD_000),
- PINMUX_DATA(SDA1_MARK, PE3MD_001),
- PINMUX_DATA(TCLKD_MARK, PE3MD_010),
- PINMUX_DATA(ADTRG_MARK, PE3MD_011),
- PINMUX_DATA(DV_HSYNC_MARK, PE3MD_100),
-
- PINMUX_DATA(PE2_DATA, PE2MD_000),
- PINMUX_DATA(SCL1_MARK, PE2MD_001),
- PINMUX_DATA(TCLKD_MARK, PE2MD_010),
- PINMUX_DATA(IOIS16_MARK, PE2MD_011),
- PINMUX_DATA(DV_VSYNC_MARK, PE2MD_100),
-
- PINMUX_DATA(PE1_DATA, PE1MD_000),
- PINMUX_DATA(SDA0_MARK, PE1MD_001),
- PINMUX_DATA(TCLKB_MARK, PE1MD_010),
- PINMUX_DATA(AUDIO_CLK_MARK, PE1MD_010),
- PINMUX_DATA(DV_CLK_MARK, PE1MD_100),
-
- PINMUX_DATA(PE0_DATA, PE0MD_00),
- PINMUX_DATA(SCL0_MARK, PE0MD_01),
- PINMUX_DATA(TCLKA_MARK, PE0MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PE0MD_11),
-
- /* Port F */
- PINMUX_DATA(PF23_DATA, PF23MD_000),
- PINMUX_DATA(SD_D2_MARK, PF23MD_001),
- PINMUX_DATA(TXD3_MARK, PF23MD_100),
- PINMUX_DATA(MMC_D2_MARK, PF23MD_101),
-
- PINMUX_DATA(PF22_DATA, PF22MD_000),
- PINMUX_DATA(SD_D3_MARK, PF22MD_001),
- PINMUX_DATA(RXD3_MARK, PF22MD_100),
- PINMUX_DATA(MMC_D3_MARK, PF22MD_101),
-
- PINMUX_DATA(PF21_DATA, PF21MD_000),
- PINMUX_DATA(SD_CMD_MARK, PF21MD_001),
- PINMUX_DATA(SCK3_MARK, PF21MD_100),
- PINMUX_DATA(MMC_CMD_MARK, PF21MD_101),
-
- PINMUX_DATA(PF20_DATA, PF20MD_000),
- PINMUX_DATA(SD_CLK_MARK, PF20MD_001),
- PINMUX_DATA(SSIDATA3_MARK, PF20MD_010),
- PINMUX_DATA(MMC_CLK_MARK, PF20MD_101),
-
- PINMUX_DATA(PF19_DATA, PF19MD_000),
- PINMUX_DATA(SD_D0_MARK, PF19MD_001),
- PINMUX_DATA(SSIWS3_MARK, PF19MD_010),
- PINMUX_DATA(IRQ7_PF_MARK, PF19MD_100),
- PINMUX_DATA(MMC_D0_MARK, PF19MD_101),
-
- PINMUX_DATA(PF18_DATA, PF18MD_000),
- PINMUX_DATA(SD_D1_MARK, PF18MD_001),
- PINMUX_DATA(SSISCK3_MARK, PF18MD_010),
- PINMUX_DATA(IRQ6_PF_MARK, PF18MD_100),
- PINMUX_DATA(MMC_D1_MARK, PF18MD_101),
-
- PINMUX_DATA(PF17_DATA, PF17MD_000),
- PINMUX_DATA(SD_WP_MARK, PF17MD_001),
- PINMUX_DATA(FRB_MARK, PF17MD_011),
- PINMUX_DATA(IRQ5_PF_MARK, PF17MD_100),
-
- PINMUX_DATA(PF16_DATA, PF16MD_000),
- PINMUX_DATA(SD_CD_MARK, PF16MD_001),
- PINMUX_DATA(FCE_MARK, PF16MD_011),
- PINMUX_DATA(IRQ4_PF_MARK, PF16MD_100),
- PINMUX_DATA(MMC_CD_MARK, PF16MD_101),
-
- PINMUX_DATA(PF15_DATA, PF15MD_000),
- PINMUX_DATA(A0_MARK, PF15MD_001),
- PINMUX_DATA(SSIDATA2_MARK, PF15MD_010),
- PINMUX_DATA(WDTOVF_MARK, PF15MD_011),
- PINMUX_DATA(TXD2_MARK, PF15MD_100),
-
- PINMUX_DATA(PF14_DATA, PF14MD_000),
- PINMUX_DATA(A25_MARK, PF14MD_001),
- PINMUX_DATA(SSIWS2_MARK, PF14MD_010),
- PINMUX_DATA(RXD2_MARK, PF14MD_100),
-
- PINMUX_DATA(PF13_DATA, PF13MD_000),
- PINMUX_DATA(A24_MARK, PF13MD_001),
- PINMUX_DATA(SSISCK2_MARK, PF13MD_010),
- PINMUX_DATA(SCK2_MARK, PF13MD_100),
-
- PINMUX_DATA(PF12_DATA, PF12MD_000),
- PINMUX_DATA(SSIDATA1_MARK, PF12MD_010),
- PINMUX_DATA(DV_DATA12_MARK, PF12MD_011),
- PINMUX_DATA(TXD1_MARK, PF12MD_100),
- PINMUX_DATA(MMC_D7_MARK, PF12MD_101),
-
- PINMUX_DATA(PF11_DATA, PF11MD_000),
- PINMUX_DATA(SSIWS1_MARK, PF11MD_010),
- PINMUX_DATA(DV_DATA2_MARK, PF11MD_011),
- PINMUX_DATA(RXD1_MARK, PF11MD_100),
- PINMUX_DATA(MMC_D6_MARK, PF11MD_101),
-
- PINMUX_DATA(PF10_DATA, PF10MD_000),
- PINMUX_DATA(CS1_MARK, PF10MD_001),
- PINMUX_DATA(SSISCK1_MARK, PF10MD_010),
- PINMUX_DATA(DV_DATA1_MARK, PF10MD_011),
- PINMUX_DATA(SCK1_MARK, PF10MD_100),
- PINMUX_DATA(MMC_D5_MARK, PF10MD_101),
-
- PINMUX_DATA(PF9_DATA, PF9MD_000),
- PINMUX_DATA(BS_MARK, PF9MD_001),
- PINMUX_DATA(DV_DATA0_MARK, PF9MD_011),
- PINMUX_DATA(SCK0_MARK, PF9MD_100),
- PINMUX_DATA(MMC_D4_MARK, PF9MD_101),
- PINMUX_DATA(RTS1_MARK, PF9MD_110),
-
- PINMUX_DATA(PF8_DATA, PF8MD_000),
- PINMUX_DATA(A23_MARK, PF8MD_001),
- PINMUX_DATA(TXD0_MARK, PF8MD_100),
-
- PINMUX_DATA(PF7_DATA, PF7MD_000),
- PINMUX_DATA(SSIRXD0_MARK, PF7MD_010),
- PINMUX_DATA(RXD0_MARK, PF7MD_100),
- PINMUX_DATA(CTS1_MARK, PF7MD_110),
-
- PINMUX_DATA(PF6_DATA, PF6MD_000),
- PINMUX_DATA(CE2A_MARK, PF6MD_001),
- PINMUX_DATA(SSITXD0_MARK, PF6MD_010),
-
- PINMUX_DATA(PF5_DATA, PF5MD_000),
- PINMUX_DATA(SSIWS0_MARK, PF5MD_010),
-
- PINMUX_DATA(PF4_DATA, PF4MD_000),
- PINMUX_DATA(CS5CE1A_MARK, PF4MD_001),
- PINMUX_DATA(SSISCK0_MARK, PF4MD_010),
-
- PINMUX_DATA(PF3_DATA, PF3MD_000),
- PINMUX_DATA(CS2_MARK, PF3MD_001),
- PINMUX_DATA(MISO1_MARK, PF3MD_011),
- PINMUX_DATA(TIOC4D_MARK, PF3MD_100),
-
- PINMUX_DATA(PF2_DATA, PF2MD_000),
- PINMUX_DATA(WAIT_MARK, PF2MD_001),
- PINMUX_DATA(MOSI1_MARK, PF2MD_011),
- PINMUX_DATA(TIOC4C_MARK, PF2MD_100),
- PINMUX_DATA(TEND0_MARK, PF2MD_101),
-
- PINMUX_DATA(PF1_DATA, PF1MD_000),
- PINMUX_DATA(BACK_MARK, PF1MD_001),
- PINMUX_DATA(SSL10_MARK, PF1MD_011),
- PINMUX_DATA(TIOC4B_MARK, PF1MD_100),
- PINMUX_DATA(DACK0_MARK, PF1MD_101),
-
- PINMUX_DATA(PF0_DATA, PF0MD_000),
- PINMUX_DATA(BREQ_MARK, PF0MD_001),
- PINMUX_DATA(RSPCK1_MARK, PF0MD_011),
- PINMUX_DATA(TIOC4A_MARK, PF0MD_100),
- PINMUX_DATA(DREQ0_MARK, PF0MD_101),
-
- /* Port G */
- PINMUX_DATA(PG27_DATA, PG27MD_00),
- PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11),
- PINMUX_DATA(LCD_DE_MARK, PG27MD_11),
-
- PINMUX_DATA(PG26_DATA, PG26MD_00),
- PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10),
- PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10),
-
- PINMUX_DATA(PG25_DATA, PG25MD_00),
- PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10),
- PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10),
-
- PINMUX_DATA(PG24_DATA, PG24MD_00),
- PINMUX_DATA(LCD_CLK_MARK, PG24MD_10),
-
- PINMUX_DATA(PG23_DATA, PG23MD_000),
- PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011),
- PINMUX_DATA(TXD5_MARK, PG23MD_100),
-
- PINMUX_DATA(PG22_DATA, PG22MD_000),
- PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011),
- PINMUX_DATA(RXD5_MARK, PG22MD_100),
-
- PINMUX_DATA(PG21_DATA, PG21MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PG21MD_001),
- PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011),
- PINMUX_DATA(TXD4_MARK, PG21MD_100),
-
- PINMUX_DATA(PG20_DATA, PG20MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PG20MD_001),
- PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011),
- PINMUX_DATA(RXD4_MARK, PG20MD_100),
-
- PINMUX_DATA(PG19_DATA, PG19MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PG19MD_001),
- PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010),
- PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011),
- PINMUX_DATA(SCK5_MARK, PG19MD_100),
-
- PINMUX_DATA(PG18_DATA, PG18MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PG18MD_001),
- PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010),
- PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011),
- PINMUX_DATA(SCK4_MARK, PG18MD_100),
-
-// TODO hardware manual has PG17 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG17_DATA, PG17MD_00),
- PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01),
- PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10),
-
-// TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description
-// we're going with 2 bits
- PINMUX_DATA(PG16_DATA, PG16MD_00),
- PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01),
- PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10),
-
- PINMUX_DATA(PG15_DATA, PG15MD_00),
- PINMUX_DATA(D31_MARK, PG15MD_01),
- PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10),
- PINMUX_DATA(PINT7_PG_MARK, PG15MD_11),
-
- PINMUX_DATA(PG14_DATA, PG14MD_00),
- PINMUX_DATA(D30_MARK, PG14MD_01),
- PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10),
- PINMUX_DATA(PINT6_PG_MARK, PG14MD_11),
-
- PINMUX_DATA(PG13_DATA, PG13MD_00),
- PINMUX_DATA(D29_MARK, PG13MD_01),
- PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10),
- PINMUX_DATA(PINT5_PG_MARK, PG13MD_11),
-
- PINMUX_DATA(PG12_DATA, PG12MD_00),
- PINMUX_DATA(D28_MARK, PG12MD_01),
- PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10),
- PINMUX_DATA(PINT4_PG_MARK, PG12MD_11),
-
- PINMUX_DATA(PG11_DATA, PG11MD_000),
- PINMUX_DATA(D27_MARK, PG11MD_001),
- PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010),
- PINMUX_DATA(PINT3_PG_MARK, PG11MD_011),
- PINMUX_DATA(TIOC3D_MARK, PG11MD_100),
-
- PINMUX_DATA(PG10_DATA, PG10MD_000),
- PINMUX_DATA(D26_MARK, PG10MD_001),
- PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010),
- PINMUX_DATA(PINT2_PG_MARK, PG10MD_011),
- PINMUX_DATA(TIOC3C_MARK, PG10MD_100),
-
- PINMUX_DATA(PG9_DATA, PG9MD_000),
- PINMUX_DATA(D25_MARK, PG9MD_001),
- PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010),
- PINMUX_DATA(PINT1_PG_MARK, PG9MD_011),
- PINMUX_DATA(TIOC3B_MARK, PG9MD_100),
-
- PINMUX_DATA(PG8_DATA, PG8MD_000),
- PINMUX_DATA(D24_MARK, PG8MD_001),
- PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010),
- PINMUX_DATA(PINT0_PG_MARK, PG8MD_011),
- PINMUX_DATA(TIOC3A_MARK, PG8MD_100),
-
- PINMUX_DATA(PG7_DATA, PG7MD_000),
- PINMUX_DATA(D23_MARK, PG7MD_001),
- PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010),
- PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011),
- PINMUX_DATA(TIOC2B_MARK, PG7MD_100),
-
- PINMUX_DATA(PG6_DATA, PG6MD_000),
- PINMUX_DATA(D22_MARK, PG6MD_001),
- PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010),
- PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011),
- PINMUX_DATA(TIOC2A_MARK, PG6MD_100),
-
- PINMUX_DATA(PG5_DATA, PG5MD_000),
- PINMUX_DATA(D21_MARK, PG5MD_001),
- PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010),
- PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011),
- PINMUX_DATA(TIOC1B_MARK, PG5MD_100),
-
- PINMUX_DATA(PG4_DATA, PG4MD_000),
- PINMUX_DATA(D20_MARK, PG4MD_001),
- PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010),
- PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011),
- PINMUX_DATA(TIOC1A_MARK, PG4MD_100),
-
- PINMUX_DATA(PG3_DATA, PG3MD_000),
- PINMUX_DATA(D19_MARK, PG3MD_001),
- PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010),
- PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011),
- PINMUX_DATA(TIOC0D_MARK, PG3MD_100),
-
- PINMUX_DATA(PG2_DATA, PG2MD_000),
- PINMUX_DATA(D18_MARK, PG2MD_001),
- PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010),
- PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011),
- PINMUX_DATA(TIOC0C_MARK, PG2MD_100),
-
- PINMUX_DATA(PG1_DATA, PG1MD_000),
- PINMUX_DATA(D17_MARK, PG1MD_001),
- PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010),
- PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011),
- PINMUX_DATA(TIOC0B_MARK, PG1MD_100),
-
- PINMUX_DATA(PG0_DATA, PG0MD_000),
- PINMUX_DATA(D16_MARK, PG0MD_001),
- PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010),
- PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011),
- PINMUX_DATA(TIOC0A_MARK, PG0MD_100),
-
- /* Port H */
- PINMUX_DATA(PH7_DATA, PH7MD_00),
- PINMUX_DATA(PHAN7_MARK, PH7MD_01),
- PINMUX_DATA(PINT7_PH_MARK, PH7MD_10),
-
- PINMUX_DATA(PH6_DATA, PH6MD_00),
- PINMUX_DATA(PHAN6_MARK, PH6MD_01),
- PINMUX_DATA(PINT6_PH_MARK, PH6MD_10),
-
- PINMUX_DATA(PH5_DATA, PH5MD_00),
- PINMUX_DATA(PHAN5_MARK, PH5MD_01),
- PINMUX_DATA(PINT5_PH_MARK, PH5MD_10),
- PINMUX_DATA(LCD_EXTCLK_MARK, PH5MD_11),
-
- PINMUX_DATA(PH4_DATA, PH4MD_00),
- PINMUX_DATA(PHAN4_MARK, PH4MD_01),
- PINMUX_DATA(PINT4_PH_MARK, PH4MD_10),
-
- PINMUX_DATA(PH3_DATA, PH3MD_00),
- PINMUX_DATA(PHAN3_MARK, PH3MD_01),
- PINMUX_DATA(PINT3_PH_MARK, PH3MD_10),
-
- PINMUX_DATA(PH2_DATA, PH2MD_00),
- PINMUX_DATA(PHAN2_MARK, PH2MD_01),
- PINMUX_DATA(PINT2_PH_MARK, PH2MD_10),
-
- PINMUX_DATA(PH1_DATA, PH1MD_00),
- PINMUX_DATA(PHAN1_MARK, PH1MD_01),
- PINMUX_DATA(PINT1_PH_MARK, PH1MD_10),
-
- PINMUX_DATA(PH0_DATA, PH0MD_00),
- PINMUX_DATA(PHAN0_MARK, PH0MD_01),
- PINMUX_DATA(PINT0_PH_MARK, PH0MD_10),
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_DATA(PJ31_DATA, PJ31MD_0),
- PINMUX_DATA(DV_CLK_MARK, PJ31MD_1),
-
- PINMUX_DATA(PJ30_DATA, PJ30MD_000),
- PINMUX_DATA(SSIDATA5_MARK, PJ30MD_010),
- PINMUX_DATA(TIOC2B_MARK, PJ30MD_100),
- PINMUX_DATA(IETXD_MARK, PJ30MD_101),
-
- PINMUX_DATA(PJ29_DATA, PJ29MD_000),
- PINMUX_DATA(SSIWS5_MARK, PJ29MD_010),
- PINMUX_DATA(TIOC2A_MARK, PJ29MD_100),
- PINMUX_DATA(IERXD_MARK, PJ29MD_101),
-
- PINMUX_DATA(PJ28_DATA, PJ28MD_000),
- PINMUX_DATA(SSISCK5_MARK, PJ28MD_010),
- PINMUX_DATA(TIOC1B_MARK, PJ28MD_100),
- PINMUX_DATA(RTS7_MARK, PJ28MD_101),
-
- PINMUX_DATA(PJ27_DATA, PJ27MD_000),
- PINMUX_DATA(TIOC1A_MARK, PJ27MD_100),
- PINMUX_DATA(CTS7_MARK, PJ27MD_101),
-
- PINMUX_DATA(PJ26_DATA, PJ26MD_000),
- PINMUX_DATA(SSIDATA4_MARK, PJ26MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ26MD_011),
- PINMUX_DATA(TXD7_MARK, PJ26MD_101),
-
- PINMUX_DATA(PJ25_DATA, PJ25MD_000),
- PINMUX_DATA(SSIWS4_MARK, PJ25MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ25MD_011),
- PINMUX_DATA(SPDIF_OUT_MARK, PJ25MD_100),
- PINMUX_DATA(RXD7_MARK, PJ25MD_101),
-
- PINMUX_DATA(PJ24_DATA, PJ24MD_000),
- PINMUX_DATA(SSISCK4_MARK, PJ24MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ24MD_011),
- PINMUX_DATA(SPDIF_IN_MARK, PJ24MD_100),
- PINMUX_DATA(SCK7_MARK, PJ24MD_101),
-
- PINMUX_DATA(PJ23_DATA, PJ23MD_000),
- PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001),
- PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
- PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
- PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
- PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
- PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
-
- PINMUX_DATA(PJ22_DATA, PJ22MD_000),
- PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
- PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
- PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
- PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
- PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
- PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
-
- PINMUX_DATA(PJ21_DATA, PJ21MD_000),
- PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
- PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
- PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
- PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
- PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
- PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
-
- PINMUX_DATA(PJ20_DATA, PJ20MD_000),
- PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
- PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
- PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
- PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
- PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
- PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
-
- PINMUX_DATA(PJ19_DATA, PJ19MD_000),
- PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
- PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010),
- PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011),
- PINMUX_DATA(TIOC0D_MARK, PJ19MD_100),
- PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101),
- PINMUX_DATA(AUDIO_XOUT_MARK, PJ19MD_110),
-
- PINMUX_DATA(PJ18_DATA, PJ18MD_000),
- PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001),
- PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010),
- PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011),
- PINMUX_DATA(TIOC0C_MARK, PJ18MD_100),
- PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101),
-
- PINMUX_DATA(PJ17_DATA, PJ17MD_000),
- PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001),
- PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010),
- PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011),
- PINMUX_DATA(TIOC0B_MARK, PJ17MD_100),
- PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101),
-
- PINMUX_DATA(PJ16_DATA, PJ16MD_000),
- PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001),
- PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010),
- PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011),
- PINMUX_DATA(TIOC0A_MARK, PJ16MD_100),
- PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101),
-
- PINMUX_DATA(PJ15_DATA, PJ15MD_000),
- PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001),
- PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010),
- PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011),
- PINMUX_DATA(PWM2H_MARK, PJ15MD_100),
- PINMUX_DATA(TXD7_MARK, PJ15MD_101),
-
- PINMUX_DATA(PJ14_DATA, PJ14MD_000),
- PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001),
- PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010),
- PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011),
- PINMUX_DATA(PWM2G_MARK, PJ14MD_100),
- PINMUX_DATA(TXD6_MARK, PJ14MD_101),
-
- PINMUX_DATA(PJ13_DATA, PJ13MD_000),
- PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001),
- PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010),
- PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011),
- PINMUX_DATA(PWM2F_MARK, PJ13MD_100),
- PINMUX_DATA(TXD5_MARK, PJ13MD_101),
-
- PINMUX_DATA(PJ12_DATA, PJ12MD_000),
- PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001),
- PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010),
- PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011),
- PINMUX_DATA(PWM2E_MARK, PJ12MD_100),
- PINMUX_DATA(SCK7_MARK, PJ12MD_101),
-
- PINMUX_DATA(PJ11_DATA, PJ11MD_000),
- PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001),
- PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010),
- PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011),
- PINMUX_DATA(PWM2D_MARK, PJ11MD_100),
- PINMUX_DATA(SCK6_MARK, PJ11MD_101),
-
- PINMUX_DATA(PJ10_DATA, PJ10MD_000),
- PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001),
- PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010),
- PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011),
- PINMUX_DATA(PWM2C_MARK, PJ10MD_100),
- PINMUX_DATA(SCK5_MARK, PJ10MD_101),
-
- PINMUX_DATA(PJ9_DATA, PJ9MD_000),
- PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001),
- PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010),
- PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011),
- PINMUX_DATA(PWM2B_MARK, PJ9MD_100),
- PINMUX_DATA(RTS5_MARK, PJ9MD_101),
-
- PINMUX_DATA(PJ8_DATA, PJ8MD_000),
- PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001),
- PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010),
- PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011),
- PINMUX_DATA(PWM2A_MARK, PJ8MD_100),
- PINMUX_DATA(CTS5_MARK, PJ8MD_101),
-
- PINMUX_DATA(PJ7_DATA, PJ7MD_000),
- PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001),
- PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010),
- PINMUX_DATA(SD_D2_MARK, PJ7MD_011),
- PINMUX_DATA(PWM1H_MARK, PJ7MD_100),
-
- PINMUX_DATA(PJ6_DATA, PJ6MD_000),
- PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001),
- PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010),
- PINMUX_DATA(SD_D3_MARK, PJ6MD_011),
- PINMUX_DATA(PWM1G_MARK, PJ6MD_100),
-
- PINMUX_DATA(PJ5_DATA, PJ5MD_000),
- PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001),
- PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010),
- PINMUX_DATA(SD_CMD_MARK, PJ5MD_011),
- PINMUX_DATA(PWM1F_MARK, PJ5MD_100),
-
- PINMUX_DATA(PJ4_DATA, PJ4MD_000),
- PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001),
- PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010),
- PINMUX_DATA(SD_CLK_MARK, PJ4MD_011),
- PINMUX_DATA(PWM1E_MARK, PJ4MD_100),
-
- PINMUX_DATA(PJ3_DATA, PJ3MD_000),
- PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001),
- PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010),
- PINMUX_DATA(SD_D0_MARK, PJ3MD_011),
- PINMUX_DATA(PWM1D_MARK, PJ3MD_100),
-
- PINMUX_DATA(PJ2_DATA, PJ2MD_000),
- PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001),
- PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010),
- PINMUX_DATA(SD_D1_MARK, PJ2MD_011),
- PINMUX_DATA(PWM1C_MARK, PJ2MD_100),
-
- PINMUX_DATA(PJ1_DATA, PJ1MD_000),
- PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001),
- PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010),
- PINMUX_DATA(SD_WP_MARK, PJ1MD_011),
- PINMUX_DATA(PWM1B_MARK, PJ1MD_100),
-
- PINMUX_DATA(PJ0_DATA, PJ0MD_000),
- PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001),
- PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010),
- PINMUX_DATA(SD_CD_MARK, PJ0MD_011),
- PINMUX_DATA(PWM1A_MARK, PJ0MD_100),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* Port A */
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* Port B */
- PINMUX_GPIO(PB22),
- PINMUX_GPIO(PB21),
- PINMUX_GPIO(PB20),
- PINMUX_GPIO(PB19),
- PINMUX_GPIO(PB18),
- PINMUX_GPIO(PB17),
- PINMUX_GPIO(PB16),
- PINMUX_GPIO(PB15),
- PINMUX_GPIO(PB14),
- PINMUX_GPIO(PB13),
- PINMUX_GPIO(PB12),
- PINMUX_GPIO(PB11),
- PINMUX_GPIO(PB10),
- PINMUX_GPIO(PB9),
- PINMUX_GPIO(PB8),
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
-
- /* Port C */
- PINMUX_GPIO(PC8),
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* Port D */
- PINMUX_GPIO(PD15),
- PINMUX_GPIO(PD14),
- PINMUX_GPIO(PD13),
- PINMUX_GPIO(PD12),
- PINMUX_GPIO(PD11),
- PINMUX_GPIO(PD10),
- PINMUX_GPIO(PD9),
- PINMUX_GPIO(PD8),
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* Port E */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* Port F */
- PINMUX_GPIO(PF23),
- PINMUX_GPIO(PF22),
- PINMUX_GPIO(PF21),
- PINMUX_GPIO(PF20),
- PINMUX_GPIO(PF19),
- PINMUX_GPIO(PF18),
- PINMUX_GPIO(PF17),
- PINMUX_GPIO(PF16),
- PINMUX_GPIO(PF15),
- PINMUX_GPIO(PF14),
- PINMUX_GPIO(PF13),
- PINMUX_GPIO(PF12),
- PINMUX_GPIO(PF11),
- PINMUX_GPIO(PF10),
- PINMUX_GPIO(PF9),
- PINMUX_GPIO(PF8),
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* Port G */
- PINMUX_GPIO(PG27),
- PINMUX_GPIO(PG26),
- PINMUX_GPIO(PG25),
- PINMUX_GPIO(PG24),
- PINMUX_GPIO(PG23),
- PINMUX_GPIO(PG22),
- PINMUX_GPIO(PG21),
- PINMUX_GPIO(PG20),
- PINMUX_GPIO(PG19),
- PINMUX_GPIO(PG18),
- PINMUX_GPIO(PG17),
- PINMUX_GPIO(PG16),
- PINMUX_GPIO(PG15),
- PINMUX_GPIO(PG14),
- PINMUX_GPIO(PG13),
- PINMUX_GPIO(PG12),
- PINMUX_GPIO(PG11),
- PINMUX_GPIO(PG10),
- PINMUX_GPIO(PG9),
- PINMUX_GPIO(PG8),
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* Port H - Port H does not have a Data Register */
-
- /* Port I - not on device */
-
- /* Port J */
- PINMUX_GPIO(PJ31),
- PINMUX_GPIO(PJ30),
- PINMUX_GPIO(PJ29),
- PINMUX_GPIO(PJ28),
- PINMUX_GPIO(PJ27),
- PINMUX_GPIO(PJ26),
- PINMUX_GPIO(PJ25),
- PINMUX_GPIO(PJ24),
- PINMUX_GPIO(PJ23),
- PINMUX_GPIO(PJ22),
- PINMUX_GPIO(PJ21),
- PINMUX_GPIO(PJ20),
- PINMUX_GPIO(PJ19),
- PINMUX_GPIO(PJ18),
- PINMUX_GPIO(PJ17),
- PINMUX_GPIO(PJ16),
- PINMUX_GPIO(PJ15),
- PINMUX_GPIO(PJ14),
- PINMUX_GPIO(PJ13),
- PINMUX_GPIO(PJ12),
- PINMUX_GPIO(PJ11),
- PINMUX_GPIO(PJ10),
- PINMUX_GPIO(PJ9),
- PINMUX_GPIO(PJ8),
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* INTC */
- GPIO_FN(IRQ7_PG),
- GPIO_FN(IRQ6_PG),
- GPIO_FN(IRQ5_PG),
- GPIO_FN(IRQ4_PG),
- GPIO_FN(IRQ3_PG),
- GPIO_FN(IRQ2_PG),
- GPIO_FN(IRQ1_PG),
- GPIO_FN(IRQ0_PG),
- GPIO_FN(IRQ7_PF),
- GPIO_FN(IRQ6_PF),
- GPIO_FN(IRQ5_PF),
- GPIO_FN(IRQ4_PF),
- GPIO_FN(IRQ3_PJ),
- GPIO_FN(IRQ2_PJ),
- GPIO_FN(IRQ1_PJ),
- GPIO_FN(IRQ0_PJ),
- GPIO_FN(IRQ1_PC),
- GPIO_FN(IRQ0_PC),
-
- GPIO_FN(PINT7_PG),
- GPIO_FN(PINT6_PG),
- GPIO_FN(PINT5_PG),
- GPIO_FN(PINT4_PG),
- GPIO_FN(PINT3_PG),
- GPIO_FN(PINT2_PG),
- GPIO_FN(PINT1_PG),
- GPIO_FN(PINT0_PG),
- GPIO_FN(PINT7_PH),
- GPIO_FN(PINT6_PH),
- GPIO_FN(PINT5_PH),
- GPIO_FN(PINT4_PH),
- GPIO_FN(PINT3_PH),
- GPIO_FN(PINT2_PH),
- GPIO_FN(PINT1_PH),
- GPIO_FN(PINT0_PH),
- GPIO_FN(PINT7_PJ),
- GPIO_FN(PINT6_PJ),
- GPIO_FN(PINT5_PJ),
- GPIO_FN(PINT4_PJ),
- GPIO_FN(PINT3_PJ),
- GPIO_FN(PINT2_PJ),
- GPIO_FN(PINT1_PJ),
- GPIO_FN(PINT0_PJ),
-
- /* WDT */
- GPIO_FN(WDTOVF),
-
- /* CAN */
- GPIO_FN(CTX2),
- GPIO_FN(CRX2),
- GPIO_FN(CTX1),
- GPIO_FN(CRX1),
- GPIO_FN(CTX0),
- GPIO_FN(CRX0),
- GPIO_FN(CTX0_CTX1),
- GPIO_FN(CRX0_CRX1),
- GPIO_FN(CTX0_CTX1_CTX2),
- GPIO_FN(CRX0_CRX1_CRX2),
- GPIO_FN(CTX2_PJ21),
- GPIO_FN(CRX2_PJ20),
- GPIO_FN(CTX1_PJ23),
- GPIO_FN(CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_PJ23),
- GPIO_FN(CRX0_CRX1_PJ22),
- GPIO_FN(CTX0_CTX1_CTX2_PJ21),
- GPIO_FN(CRX0_CRX1_CRX2_PJ20),
-
- /* DMAC */
- GPIO_FN(TEND0),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
-
- /* ADC */
- GPIO_FN(ADTRG),
-
- /* BSCh */
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
-
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- GPIO_FN(BS),
- GPIO_FN(CS4),
- GPIO_FN(CS3),
- GPIO_FN(CS2),
- GPIO_FN(CS1),
- GPIO_FN(CS0),
- GPIO_FN(CS5CE1A),
- GPIO_FN(CE2A),
- GPIO_FN(CE2B),
- GPIO_FN(RD),
- GPIO_FN(RDWR),
- GPIO_FN(WE3ICIOWRAHDQMUU),
- GPIO_FN(WE2ICIORDDQMUL),
- GPIO_FN(WE1DQMUWE),
- GPIO_FN(WE0DQML),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(WAIT),
- GPIO_FN(BREQ),
- GPIO_FN(BACK),
- GPIO_FN(IOIS16),
-
- /* TMU */
- GPIO_FN(TIOC4D),
- GPIO_FN(TIOC4C),
- GPIO_FN(TIOC4B),
- GPIO_FN(TIOC4A),
- GPIO_FN(TIOC3D),
- GPIO_FN(TIOC3C),
- GPIO_FN(TIOC3B),
- GPIO_FN(TIOC3A),
- GPIO_FN(TIOC2B),
- GPIO_FN(TIOC1B),
- GPIO_FN(TIOC2A),
- GPIO_FN(TIOC1A),
- GPIO_FN(TIOC0D),
- GPIO_FN(TIOC0C),
- GPIO_FN(TIOC0B),
- GPIO_FN(TIOC0A),
- GPIO_FN(TCLKD),
- GPIO_FN(TCLKC),
- GPIO_FN(TCLKB),
- GPIO_FN(TCLKA),
-
- /* SCIF */
- GPIO_FN(SCK0),
- GPIO_FN(TXD0),
- GPIO_FN(RXD0),
- GPIO_FN(SCK1),
- GPIO_FN(TXD1),
- GPIO_FN(RXD1),
- GPIO_FN(RTS1),
- GPIO_FN(CTS1),
- GPIO_FN(SCK2),
- GPIO_FN(TXD2),
- GPIO_FN(RXD2),
- GPIO_FN(SCK3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(SCK4),
- GPIO_FN(TXD4),
- GPIO_FN(RXD4),
- GPIO_FN(SCK5),
- GPIO_FN(TXD5),
- GPIO_FN(RXD5),
- GPIO_FN(RTS5),
- GPIO_FN(CTS5),
- GPIO_FN(SCK6),
- GPIO_FN(TXD6),
- GPIO_FN(RXD6),
- GPIO_FN(SCK7),
- GPIO_FN(TXD7),
- GPIO_FN(RXD7),
- GPIO_FN(RTS7),
- GPIO_FN(CTS7),
-
- /* RSPI */
- GPIO_FN(RSPCK0_PJ16),
- GPIO_FN(SSL00_PJ17),
- GPIO_FN(MOSI0_PJ18),
- GPIO_FN(MISO0_PJ19),
- GPIO_FN(RSPCK0_PB17),
- GPIO_FN(SSL00_PB18),
- GPIO_FN(MOSI0_PB19),
- GPIO_FN(MISO0_PB20),
- GPIO_FN(RSPCK1),
- GPIO_FN(MOSI1),
- GPIO_FN(MISO1),
- GPIO_FN(SSL10),
-
- /* IIC3 */
- GPIO_FN(SCL0),
- GPIO_FN(SCL1),
- GPIO_FN(SCL2),
- GPIO_FN(SDA0),
- GPIO_FN(SDA1),
- GPIO_FN(SDA2),
-
- /* SSI */
- GPIO_FN(SSISCK0),
- GPIO_FN(SSIWS0),
- GPIO_FN(SSITXD0),
- GPIO_FN(SSIRXD0),
- GPIO_FN(SSIWS1),
- GPIO_FN(SSIWS2),
- GPIO_FN(SSIWS3),
- GPIO_FN(SSISCK1),
- GPIO_FN(SSISCK2),
- GPIO_FN(SSISCK3),
- GPIO_FN(SSIDATA1),
- GPIO_FN(SSIDATA2),
- GPIO_FN(SSIDATA3),
- GPIO_FN(AUDIO_CLK),
- GPIO_FN(AUDIO_XOUT),
-
- /* SIOF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SIOFTXD),
- GPIO_FN(SIOFRXD),
- GPIO_FN(SIOFSYNC),
- GPIO_FN(SIOFSCK),
-
- /* SPDIF */ /* NOTE Shares AUDIO_CLK with SSI */
- GPIO_FN(SPDIF_IN),
- GPIO_FN(SPDIF_OUT),
-
- /* NANDFMC */ /* NOTE Controller is not available in boot mode 0 */
- GPIO_FN(FCE),
- GPIO_FN(FRB),
-
- /* VDC3 */
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- GPIO_FN(DV_DATA23),
- GPIO_FN(DV_DATA22),
- GPIO_FN(DV_DATA21),
- GPIO_FN(DV_DATA20),
- GPIO_FN(DV_DATA19),
- GPIO_FN(DV_DATA18),
- GPIO_FN(DV_DATA17),
- GPIO_FN(DV_DATA16),
- GPIO_FN(DV_DATA15),
- GPIO_FN(DV_DATA14),
- GPIO_FN(DV_DATA13),
- GPIO_FN(DV_DATA12),
- GPIO_FN(DV_DATA11),
- GPIO_FN(DV_DATA10),
- GPIO_FN(DV_DATA9),
- GPIO_FN(DV_DATA8),
- GPIO_FN(DV_DATA7),
- GPIO_FN(DV_DATA6),
- GPIO_FN(DV_DATA5),
- GPIO_FN(DV_DATA4),
- GPIO_FN(DV_DATA3),
- GPIO_FN(DV_DATA2),
- GPIO_FN(DV_DATA1),
- GPIO_FN(DV_DATA0),
-
- GPIO_FN(LCD_CLK),
- GPIO_FN(LCD_EXTCLK),
- GPIO_FN(LCD_VSYNC),
- GPIO_FN(LCD_HSYNC),
- GPIO_FN(LCD_DE),
-
- GPIO_FN(LCD_DATA23_PG23),
- GPIO_FN(LCD_DATA22_PG22),
- GPIO_FN(LCD_DATA21_PG21),
- GPIO_FN(LCD_DATA20_PG20),
- GPIO_FN(LCD_DATA19_PG19),
- GPIO_FN(LCD_DATA18_PG18),
- GPIO_FN(LCD_DATA17_PG17),
- GPIO_FN(LCD_DATA16_PG16),
- GPIO_FN(LCD_DATA15_PG15),
- GPIO_FN(LCD_DATA14_PG14),
- GPIO_FN(LCD_DATA13_PG13),
- GPIO_FN(LCD_DATA12_PG12),
- GPIO_FN(LCD_DATA11_PG11),
- GPIO_FN(LCD_DATA10_PG10),
- GPIO_FN(LCD_DATA9_PG9),
- GPIO_FN(LCD_DATA8_PG8),
- GPIO_FN(LCD_DATA7_PG7),
- GPIO_FN(LCD_DATA6_PG6),
- GPIO_FN(LCD_DATA5_PG5),
- GPIO_FN(LCD_DATA4_PG4),
- GPIO_FN(LCD_DATA3_PG3),
- GPIO_FN(LCD_DATA2_PG2),
- GPIO_FN(LCD_DATA1_PG1),
- GPIO_FN(LCD_DATA0_PG0),
-
- GPIO_FN(LCD_DATA23_PJ23),
- GPIO_FN(LCD_DATA22_PJ22),
- GPIO_FN(LCD_DATA21_PJ21),
- GPIO_FN(LCD_DATA20_PJ20),
- GPIO_FN(LCD_DATA19_PJ19),
- GPIO_FN(LCD_DATA18_PJ18),
- GPIO_FN(LCD_DATA17_PJ17),
- GPIO_FN(LCD_DATA16_PJ16),
- GPIO_FN(LCD_DATA15_PJ15),
- GPIO_FN(LCD_DATA14_PJ14),
- GPIO_FN(LCD_DATA13_PJ13),
- GPIO_FN(LCD_DATA12_PJ12),
- GPIO_FN(LCD_DATA11_PJ11),
- GPIO_FN(LCD_DATA10_PJ10),
- GPIO_FN(LCD_DATA9_PJ9),
- GPIO_FN(LCD_DATA8_PJ8),
- GPIO_FN(LCD_DATA7_PJ7),
- GPIO_FN(LCD_DATA6_PJ6),
- GPIO_FN(LCD_DATA5_PJ5),
- GPIO_FN(LCD_DATA4_PJ4),
- GPIO_FN(LCD_DATA3_PJ3),
- GPIO_FN(LCD_DATA2_PJ2),
- GPIO_FN(LCD_DATA1_PJ1),
- GPIO_FN(LCD_DATA0_PJ0),
-
- GPIO_FN(LCD_M_DISP),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- /* "name" addr register_size Field_Width */
-
- /* where Field_Width is 1 for single mode registers or 4 for up to 16
- * mode registers and modes are described in assending order [0..15]
- */
-
- { PINMUX_CFG_REG_VAR("PAIOR0", 0xfffe3812, 16,
- GROUP(-7, 1, -7, 1),
- GROUP(
- /* RESERVED [7] */
- PA1_IN, PA1_OUT,
- /* RESERVED [7] */
- PA0_IN, PA0_OUT ))
- },
- { PINMUX_CFG_REG_VAR("PBCR5", 0xfffe3824, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PB22MD_000, PB22MD_001, PB22MD_010, PB22MD_011,
- PB22MD_100, PB22MD_101, PB22MD_110, PB22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB21MD_00, PB21MD_01, PB21MD_10, PB21MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB20MD_000, PB20MD_001, PB20MD_010, PB20MD_011,
- PB20MD_100, PB20MD_101, PB20MD_110, PB20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR4", 0xfffe3826, 16, 4, GROUP(
- PB19MD_000, PB19MD_001, PB19MD_010, PB19MD_011,
- PB19MD_100, PB19MD_101, PB19MD_110, PB19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB18MD_000, PB18MD_001, PB18MD_010, PB18MD_011,
- PB18MD_100, PB18MD_101, PB18MD_110, PB18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB17MD_000, PB17MD_001, PB17MD_010, PB17MD_011,
- PB17MD_100, PB17MD_101, PB17MD_110, PB17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB16MD_000, PB16MD_001, PB16MD_010, PB16MD_011,
- PB16MD_100, PB16MD_101, PB16MD_110, PB16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR3", 0xfffe3828, 16, 4, GROUP(
- PB15MD_000, PB15MD_001, PB15MD_010, PB15MD_011,
- PB15MD_100, PB15MD_101, PB15MD_110, PB15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB14MD_000, PB14MD_001, PB14MD_010, PB14MD_011,
- PB14MD_100, PB14MD_101, PB14MD_110, PB14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB13MD_000, PB13MD_001, PB13MD_010, PB13MD_011,
- PB13MD_100, PB13MD_101, PB13MD_110, PB13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB12MD_00, PB12MD_01, PB12MD_10, PB12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR2", 0xfffe382a, 16, 4, GROUP(
- PB11MD_00, PB11MD_01, PB11MD_10, PB11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB10MD_00, PB10MD_01, PB10MD_10, PB10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB9MD_00, PB9MD_01, PB9MD_10, PB9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB8MD_00, PB8MD_01, PB8MD_10, PB8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PBCR1", 0xfffe382c, 16, 4, GROUP(
- PB7MD_00, PB7MD_01, PB7MD_10, PB7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB6MD_00, PB6MD_01, PB6MD_10, PB6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB5MD_00, PB5MD_01, PB5MD_10, PB5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB4MD_00, PB4MD_01, PB4MD_10, PB4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PBCR0", 0xfffe382e, 16,
- GROUP(4, 4, 4, -4),
- GROUP(
- PB3MD_00, PB3MD_01, PB3MD_10, PB3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB2MD_00, PB2MD_01, PB2MD_10, PB2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PB1MD_00, PB1MD_01, PB1MD_10, PB1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- /* RESERVED [4] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PBIOR1", 0xfffe3830, 16,
- GROUP(-9, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [9] */
- PB22_IN, PB22_OUT,
- PB21_IN, PB21_OUT,
- PB20_IN, PB20_OUT,
- PB19_IN, PB19_OUT,
- PB18_IN, PB18_OUT,
- PB17_IN, PB17_OUT,
- PB16_IN, PB16_OUT ))
- },
- { PINMUX_CFG_REG("PBIOR0", 0xfffe3832, 16, 1, GROUP(
- PB15_IN, PB15_OUT,
- PB14_IN, PB14_OUT,
- PB13_IN, PB13_OUT,
- PB12_IN, PB12_OUT,
- PB11_IN, PB11_OUT,
- PB10_IN, PB10_OUT,
- PB9_IN, PB9_OUT,
- PB8_IN, PB8_OUT,
- PB7_IN, PB7_OUT,
- PB6_IN, PB6_OUT,
- PB5_IN, PB5_OUT,
- PB4_IN, PB4_OUT,
- PB3_IN, PB3_OUT,
- PB2_IN, PB2_OUT,
- PB1_IN, PB1_OUT,
- 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCCR2", 0xfffe384a, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PC8MD_000, PC8MD_001, PC8MD_010, PC8MD_011,
- PC8MD_100, PC8MD_101, PC8MD_110, PC8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR1", 0xfffe384c, 16, 4, GROUP(
- PC7MD_000, PC7MD_001, PC7MD_010, PC7MD_011,
- PC7MD_100, PC7MD_101, PC7MD_110, PC7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC6MD_000, PC6MD_001, PC6MD_010, PC6MD_011,
- PC6MD_100, PC6MD_101, PC6MD_110, PC6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC5MD_000, PC5MD_001, PC5MD_010, PC5MD_011,
- PC5MD_100, PC5MD_101, PC5MD_110, PC5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC4MD_00, PC4MD_01, PC4MD_10, PC4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PCCR0", 0xfffe384e, 16, 4, GROUP(
- PC3MD_00, PC3MD_01, PC3MD_10, PC3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC2MD_00, PC2MD_01, PC2MD_10, PC2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC1MD_0, PC1MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PC0MD_0, PC0MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PCIOR0", 0xfffe3852, 16,
- GROUP(-7, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [7] */
- PC8_IN, PC8_OUT,
- PC7_IN, PC7_OUT,
- PC6_IN, PC6_OUT,
- PC5_IN, PC5_OUT,
- PC4_IN, PC4_OUT,
- PC3_IN, PC3_OUT,
- PC2_IN, PC2_OUT,
- PC1_IN, PC1_OUT,
- PC0_IN, PC0_OUT ))
- },
-
- { PINMUX_CFG_REG("PDCR3", 0xfffe3868, 16, 4, GROUP(
- PD15MD_00, PD15MD_01, PD15MD_10, PD15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD14MD_00, PD14MD_01, PD14MD_10, PD14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD13MD_00, PD13MD_01, PD13MD_10, PD13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD12MD_00, PD12MD_01, PD12MD_10, PD12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR2", 0xfffe386a, 16, 4, GROUP(
- PD11MD_00, PD11MD_01, PD11MD_10, PD11MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD10MD_00, PD10MD_01, PD10MD_10, PD10MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD9MD_00, PD9MD_01, PD9MD_10, PD9MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD8MD_00, PD8MD_01, PD8MD_10, PD8MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR1", 0xfffe386c, 16, 4, GROUP(
- PD7MD_00, PD7MD_01, PD7MD_10, PD7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD6MD_00, PD6MD_01, PD6MD_10, PD6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD5MD_00, PD5MD_01, PD5MD_10, PD5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD4MD_00, PD4MD_01, PD4MD_10, PD4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PDCR0", 0xfffe386e, 16, 4, GROUP(
- PD3MD_00, PD3MD_01, PD3MD_10, PD3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD2MD_00, PD2MD_01, PD2MD_10, PD2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD1MD_00, PD1MD_01, PD1MD_10, PD1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PD0MD_00, PD0MD_01, PD0MD_10, PD0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PDIOR0", 0xfffe3872, 16, 1, GROUP(
- PD15_IN, PD15_OUT,
- PD14_IN, PD14_OUT,
- PD13_IN, PD13_OUT,
- PD12_IN, PD12_OUT,
- PD11_IN, PD11_OUT,
- PD10_IN, PD10_OUT,
- PD9_IN, PD9_OUT,
- PD8_IN, PD8_OUT,
- PD7_IN, PD7_OUT,
- PD6_IN, PD6_OUT,
- PD5_IN, PD5_OUT,
- PD4_IN, PD4_OUT,
- PD3_IN, PD3_OUT,
- PD2_IN, PD2_OUT,
- PD1_IN, PD1_OUT,
- PD0_IN, PD0_OUT ))
- },
-
- { PINMUX_CFG_REG("PECR1", 0xfffe388c, 16, 4, GROUP(
- PE7MD_00, PE7MD_01, PE7MD_10, PE7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE6MD_00, PE6MD_01, PE6MD_10, PE6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE5MD_00, PE5MD_01, PE5MD_10, PE5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE4MD_00, PE4MD_01, PE4MD_10, PE4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PECR0", 0xfffe388e, 16, 4, GROUP(
- PE3MD_000, PE3MD_001, PE3MD_010, PE3MD_011,
- PE3MD_100, PE3MD_101, PE3MD_110, PE3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE2MD_000, PE2MD_001, PE2MD_010, PE2MD_011,
- PE2MD_100, PE2MD_101, PE2MD_110, PE2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE1MD_000, PE1MD_001, PE1MD_010, PE1MD_011,
- PE1MD_100, PE1MD_101, PE1MD_110, PE1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PE0MD_00, PE0MD_01, PE0MD_10, PE0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PEIOR0", 0xfffe3892, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PE7_IN, PE7_OUT,
- PE6_IN, PE6_OUT,
- PE5_IN, PE5_OUT,
- PE4_IN, PE4_OUT,
- PE3_IN, PE3_OUT,
- PE2_IN, PE2_OUT,
- PE1_IN, PE1_OUT,
- PE0_IN, PE0_OUT ))
- },
-
- { PINMUX_CFG_REG("PFCR6", 0xfffe38a2, 16, 4, GROUP(
- PF23MD_000, PF23MD_001, PF23MD_010, PF23MD_011,
- PF23MD_100, PF23MD_101, PF23MD_110, PF23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF22MD_000, PF22MD_001, PF22MD_010, PF22MD_011,
- PF22MD_100, PF22MD_101, PF22MD_110, PF22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF21MD_000, PF21MD_001, PF21MD_010, PF21MD_011,
- PF21MD_100, PF21MD_101, PF21MD_110, PF21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF20MD_000, PF20MD_001, PF20MD_010, PF20MD_011,
- PF20MD_100, PF20MD_101, PF20MD_110, PF20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR5", 0xfffe38a4, 16, 4, GROUP(
- PF19MD_000, PF19MD_001, PF19MD_010, PF19MD_011,
- PF19MD_100, PF19MD_101, PF19MD_110, PF19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF18MD_000, PF18MD_001, PF18MD_010, PF18MD_011,
- PF18MD_100, PF18MD_101, PF18MD_110, PF18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF17MD_000, PF17MD_001, PF17MD_010, PF17MD_011,
- PF17MD_100, PF17MD_101, PF17MD_110, PF17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF16MD_000, PF16MD_001, PF16MD_010, PF16MD_011,
- PF16MD_100, PF16MD_101, PF16MD_110, PF16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR4", 0xfffe38a6, 16,
- GROUP(-12, 4),
- GROUP(
- /* RESERVED [12] */
- PF15MD_000, PF15MD_001, PF15MD_010, PF15MD_011,
- PF15MD_100, PF15MD_101, PF15MD_110, PF15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PFCR3", 0xfffe38a8, 16,
- GROUP(-4, 4, 4, 4),
- GROUP(
- /* RESERVED [4] */
- PF14MD_000, PF14MD_001, PF14MD_010, PF14MD_011,
- PF14MD_100, PF14MD_101, PF14MD_110, PF14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF13MD_000, PF13MD_001, PF13MD_010, PF13MD_011,
- PF13MD_100, PF13MD_101, PF13MD_110, PF13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF12MD_000, PF12MD_001, PF12MD_010, PF12MD_011,
- PF12MD_100, PF12MD_101, PF12MD_110, PF12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR2", 0xfffe38aa, 16, 4, GROUP(
- PF11MD_000, PF11MD_001, PF11MD_010, PF11MD_011,
- PF11MD_100, PF11MD_101, PF11MD_110, PF11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF10MD_000, PF10MD_001, PF10MD_010, PF10MD_011,
- PF10MD_100, PF10MD_101, PF10MD_110, PF10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF9MD_000, PF9MD_001, PF9MD_010, PF9MD_011,
- PF9MD_100, PF9MD_101, PF9MD_110, PF9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF8MD_000, PF8MD_001, PF8MD_010, PF8MD_011,
- PF8MD_100, PF8MD_101, PF8MD_110, PF8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR1", 0xfffe38ac, 16, 4, GROUP(
- PF7MD_000, PF7MD_001, PF7MD_010, PF7MD_011,
- PF7MD_100, PF7MD_101, PF7MD_110, PF7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF6MD_000, PF6MD_001, PF6MD_010, PF6MD_011,
- PF6MD_100, PF6MD_101, PF6MD_110, PF6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF5MD_000, PF5MD_001, PF5MD_010, PF5MD_011,
- PF5MD_100, PF5MD_101, PF5MD_110, PF5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF4MD_000, PF4MD_001, PF4MD_010, PF4MD_011,
- PF4MD_100, PF4MD_101, PF4MD_110, PF4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PFCR0", 0xfffe38ae, 16, 4, GROUP(
- PF3MD_000, PF3MD_001, PF3MD_010, PF3MD_011,
- PF3MD_100, PF3MD_101, PF3MD_110, PF3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF2MD_000, PF2MD_001, PF2MD_010, PF2MD_011,
- PF2MD_100, PF2MD_101, PF2MD_110, PF2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011,
- PF1MD_100, PF1MD_101, PF1MD_110, PF1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011,
- PF0MD_100, PF0MD_101, PF0MD_110, PF0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG_VAR("PFIOR1", 0xfffe38b0, 16,
- GROUP(-8, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* RESERVED [8] */
- PF23_IN, PF23_OUT,
- PF22_IN, PF22_OUT,
- PF21_IN, PF21_OUT,
- PF20_IN, PF20_OUT,
- PF19_IN, PF19_OUT,
- PF18_IN, PF18_OUT,
- PF17_IN, PF17_OUT,
- PF16_IN, PF16_OUT ))
- },
- { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1, GROUP(
- PF15_IN, PF15_OUT,
- PF14_IN, PF14_OUT,
- PF13_IN, PF13_OUT,
- PF12_IN, PF12_OUT,
- PF11_IN, PF11_OUT,
- PF10_IN, PF10_OUT,
- PF9_IN, PF9_OUT,
- PF8_IN, PF8_OUT,
- PF7_IN, PF7_OUT,
- PF6_IN, PF6_OUT,
- PF5_IN, PF5_OUT,
- PF4_IN, PF4_OUT,
- PF3_IN, PF3_OUT,
- PF2_IN, PF2_OUT,
- PF1_IN, PF1_OUT,
- PF0_IN, PF0_OUT ))
- },
-
- { PINMUX_CFG_REG("PGCR6", 0xfffe38c2, 16, 4, GROUP(
- PG27MD_00, PG27MD_01, PG27MD_10, PG27MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG26MD_00, PG26MD_01, PG26MD_10, PG26MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG25MD_00, PG25MD_01, PG25MD_10, PG25MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG24MD_00, PG24MD_01, PG24MD_10, PG24MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR5", 0xfffe38c4, 16, 4, GROUP(
- PG23MD_000, PG23MD_001, PG23MD_010, PG23MD_011,
- PG23MD_100, PG23MD_101, PG23MD_110, PG23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG22MD_000, PG22MD_001, PG22MD_010, PG22MD_011,
- PG22MD_100, PG22MD_101, PG22MD_110, PG22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG21MD_000, PG21MD_001, PG21MD_010, PG21MD_011,
- PG21MD_100, PG21MD_101, PG21MD_110, PG21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG20MD_000, PG20MD_001, PG20MD_010, PG20MD_011,
- PG20MD_100, PG20MD_101, PG20MD_110, PG20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR4", 0xfffe38c6, 16, 4, GROUP(
- PG19MD_000, PG19MD_001, PG19MD_010, PG19MD_011,
- PG19MD_100, PG19MD_101, PG19MD_110, PG19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG18MD_000, PG18MD_001, PG18MD_010, PG18MD_011,
- PG18MD_100, PG18MD_101, PG18MD_110, PG18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG17MD_00, PG17MD_01, PG17MD_10, PG17MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG16MD_00, PG16MD_01, PG16MD_10, PG16MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR3", 0xfffe38c8, 16, 4, GROUP(
- PG15MD_00, PG15MD_01, PG15MD_10, PG15MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG14MD_00, PG14MD_01, PG14MD_10, PG14MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG13MD_00, PG13MD_01, PG13MD_10, PG13MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG12MD_00, PG12MD_01, PG12MD_10, PG12MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR2", 0xfffe38ca, 16, 4, GROUP(
- PG11MD_000, PG11MD_001, PG11MD_010, PG11MD_011,
- PG11MD_100, PG11MD_101, PG11MD_110, PG11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG10MD_000, PG10MD_001, PG10MD_010, PG10MD_011,
- PG10MD_100, PG10MD_101, PG10MD_110, PG10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG9MD_000, PG9MD_001, PG9MD_010, PG9MD_011,
- PG9MD_100, PG9MD_101, PG9MD_110, PG9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG8MD_000, PG8MD_001, PG8MD_010, PG8MD_011,
- PG8MD_100, PG8MD_101, PG8MD_110, PG8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGCR1", 0xfffe38cc, 16, 4, GROUP(
- PG7MD_000, PG7MD_001, PG7MD_010, PG7MD_011,
- PG7MD_100, PG7MD_101, PG7MD_110, PG7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG6MD_000, PG6MD_001, PG6MD_010, PG6MD_011,
- PG6MD_100, PG6MD_101, PG6MD_110, PG6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG5MD_000, PG5MD_001, PG5MD_010, PG5MD_011,
- PG5MD_100, PG5MD_101, PG5MD_110, PG5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG4MD_000, PG4MD_001, PG4MD_010, PG4MD_011,
- PG4MD_100, PG4MD_101, PG4MD_110, PG4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PGCR0", 0xfffe38ce, 16, 4, GROUP(
- PG3MD_000, PG3MD_001, PG3MD_010, PG3MD_011,
- PG3MD_100, PG3MD_101, PG3MD_110, PG3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG2MD_000, PG2MD_001, PG2MD_010, PG2MD_011,
- PG2MD_100, PG2MD_101, PG2MD_110, PG2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG1MD_000, PG1MD_001, PG1MD_010, PG1MD_011,
- PG1MD_100, PG1MD_101, PG1MD_110, PG1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PG0MD_000, PG0MD_001, PG0MD_010, PG0MD_011,
- PG0MD_100, PG0MD_101, PG0MD_110, PG0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PGIOR1", 0xfffe38d0, 16, 1, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG27_IN, PG27_OUT,
- PG26_IN, PG26_OUT,
- PG25_IN, PG25_OUT,
- PG24_IN, PG24_OUT,
- PG23_IN, PG23_OUT,
- PG22_IN, PG22_OUT,
- PG21_IN, PG21_OUT,
- PG20_IN, PG20_OUT,
- PG19_IN, PG19_OUT,
- PG18_IN, PG18_OUT,
- PG17_IN, PG17_OUT,
- PG16_IN, PG16_OUT ))
- },
- { PINMUX_CFG_REG("PGIOR0", 0xfffe38d2, 16, 1, GROUP(
- PG15_IN, PG15_OUT,
- PG14_IN, PG14_OUT,
- PG13_IN, PG13_OUT,
- PG12_IN, PG12_OUT,
- PG11_IN, PG11_OUT,
- PG10_IN, PG10_OUT,
- PG9_IN, PG9_OUT,
- PG8_IN, PG8_OUT,
- PG7_IN, PG7_OUT,
- PG6_IN, PG6_OUT,
- PG5_IN, PG5_OUT,
- PG4_IN, PG4_OUT,
- PG3_IN, PG3_OUT,
- PG2_IN, PG2_OUT,
- PG1_IN, PG1_OUT,
- PG0_IN, PG0_OUT ))
- },
-
- { PINMUX_CFG_REG("PHCR1", 0xfffe38ec, 16, 4, GROUP(
- PH7MD_00, PH7MD_01, PH7MD_10, PH7MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH6MD_00, PH6MD_01, PH6MD_10, PH6MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH5MD_00, PH5MD_01, PH5MD_10, PH5MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH4MD_00, PH4MD_01, PH4MD_10, PH4MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PHCR0", 0xfffe38ee, 16, 4, GROUP(
- PH3MD_00, PH3MD_01, PH3MD_10, PH3MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH2MD_00, PH2MD_01, PH2MD_10, PH2MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH1MD_00, PH1MD_01, PH1MD_10, PH1MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PH0MD_00, PH0MD_01, PH0MD_10, PH0MD_11, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJCR7", 0xfffe3900, 16, 4, GROUP(
- PJ31MD_0, PJ31MD_1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ30MD_000, PJ30MD_001, PJ30MD_010, PJ30MD_011,
- PJ30MD_100, PJ30MD_101, PJ30MD_110, PJ30MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ29MD_000, PJ29MD_001, PJ29MD_010, PJ29MD_011,
- PJ29MD_100, PJ29MD_101, PJ29MD_110, PJ29MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ28MD_000, PJ28MD_001, PJ28MD_010, PJ28MD_011,
- PJ28MD_100, PJ28MD_101, PJ28MD_110, PJ28MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR6", 0xfffe3902, 16, 4, GROUP(
- PJ27MD_000, PJ27MD_001, PJ27MD_010, PJ27MD_011,
- PJ27MD_100, PJ27MD_101, PJ27MD_110, PJ27MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ26MD_000, PJ26MD_001, PJ26MD_010, PJ26MD_011,
- PJ26MD_100, PJ26MD_101, PJ26MD_110, PJ26MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ25MD_000, PJ25MD_001, PJ25MD_010, PJ25MD_011,
- PJ25MD_100, PJ25MD_101, PJ25MD_110, PJ25MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ24MD_000, PJ24MD_001, PJ24MD_010, PJ24MD_011,
- PJ24MD_100, PJ24MD_101, PJ24MD_110, PJ24MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR5", 0xfffe3904, 16, 4, GROUP(
- PJ23MD_000, PJ23MD_001, PJ23MD_010, PJ23MD_011,
- PJ23MD_100, PJ23MD_101, PJ23MD_110, PJ23MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ22MD_000, PJ22MD_001, PJ22MD_010, PJ22MD_011,
- PJ22MD_100, PJ22MD_101, PJ22MD_110, PJ22MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ21MD_000, PJ21MD_001, PJ21MD_010, PJ21MD_011,
- PJ21MD_100, PJ21MD_101, PJ21MD_110, PJ21MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ20MD_000, PJ20MD_001, PJ20MD_010, PJ20MD_011,
- PJ20MD_100, PJ20MD_101, PJ20MD_110, PJ20MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR4", 0xfffe3906, 16, 4, GROUP(
- PJ19MD_000, PJ19MD_001, PJ19MD_010, PJ19MD_011,
- PJ19MD_100, PJ19MD_101, PJ19MD_110, PJ19MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ18MD_000, PJ18MD_001, PJ18MD_010, PJ18MD_011,
- PJ18MD_100, PJ18MD_101, PJ18MD_110, PJ18MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ17MD_000, PJ17MD_001, PJ17MD_010, PJ17MD_011,
- PJ17MD_100, PJ17MD_101, PJ17MD_110, PJ17MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ16MD_000, PJ16MD_001, PJ16MD_010, PJ16MD_011,
- PJ16MD_100, PJ16MD_101, PJ16MD_110, PJ16MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR3", 0xfffe3908, 16, 4, GROUP(
- PJ15MD_000, PJ15MD_001, PJ15MD_010, PJ15MD_011,
- PJ15MD_100, PJ15MD_101, PJ15MD_110, PJ15MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ14MD_000, PJ14MD_001, PJ14MD_010, PJ14MD_011,
- PJ14MD_100, PJ14MD_101, PJ14MD_110, PJ14MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ13MD_000, PJ13MD_001, PJ13MD_010, PJ13MD_011,
- PJ13MD_100, PJ13MD_101, PJ13MD_110, PJ13MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ12MD_000, PJ12MD_001, PJ12MD_010, PJ12MD_011,
- PJ12MD_100, PJ12MD_101, PJ12MD_110, PJ12MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR2", 0xfffe390a, 16, 4, GROUP(
- PJ11MD_000, PJ11MD_001, PJ11MD_010, PJ11MD_011,
- PJ11MD_100, PJ11MD_101, PJ11MD_110, PJ11MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ10MD_000, PJ10MD_001, PJ10MD_010, PJ10MD_011,
- PJ10MD_100, PJ10MD_101, PJ10MD_110, PJ10MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ9MD_000, PJ9MD_001, PJ9MD_010, PJ9MD_011,
- PJ9MD_100, PJ9MD_101, PJ9MD_110, PJ9MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ8MD_000, PJ8MD_001, PJ8MD_010, PJ8MD_011,
- PJ8MD_100, PJ8MD_101, PJ8MD_110, PJ8MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR1", 0xfffe390c, 16, 4, GROUP(
- PJ7MD_000, PJ7MD_001, PJ7MD_010, PJ7MD_011,
- PJ7MD_100, PJ7MD_101, PJ7MD_110, PJ7MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ6MD_000, PJ6MD_001, PJ6MD_010, PJ6MD_011,
- PJ6MD_100, PJ6MD_101, PJ6MD_110, PJ6MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ5MD_000, PJ5MD_001, PJ5MD_010, PJ5MD_011,
- PJ5MD_100, PJ5MD_101, PJ5MD_110, PJ5MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ4MD_000, PJ4MD_001, PJ4MD_010, PJ4MD_011,
- PJ4MD_100, PJ4MD_101, PJ4MD_110, PJ4MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG("PJCR0", 0xfffe390e, 16, 4, GROUP(
- PJ3MD_000, PJ3MD_001, PJ3MD_010, PJ3MD_011,
- PJ3MD_100, PJ3MD_101, PJ3MD_110, PJ3MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ2MD_000, PJ2MD_001, PJ2MD_010, PJ2MD_011,
- PJ2MD_100, PJ2MD_101, PJ2MD_110, PJ2MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ1MD_000, PJ1MD_001, PJ1MD_010, PJ1MD_011,
- PJ1MD_100, PJ1MD_101, PJ1MD_110, PJ1MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0,
-
- PJ0MD_000, PJ0MD_001, PJ0MD_010, PJ0MD_011,
- PJ0MD_100, PJ0MD_101, PJ0MD_110, PJ0MD_111,
- 0, 0, 0, 0, 0, 0, 0, 0 ))
- },
-
- { PINMUX_CFG_REG("PJIOR1", 0xfffe3910, 16, 1, GROUP(
- PJ31_IN, PJ31_OUT,
- PJ30_IN, PJ30_OUT,
- PJ29_IN, PJ29_OUT,
- PJ28_IN, PJ28_OUT,
- PJ27_IN, PJ27_OUT,
- PJ26_IN, PJ26_OUT,
- PJ25_IN, PJ25_OUT,
- PJ24_IN, PJ24_OUT,
- PJ23_IN, PJ23_OUT,
- PJ22_IN, PJ22_OUT,
- PJ21_IN, PJ21_OUT,
- PJ20_IN, PJ20_OUT,
- PJ19_IN, PJ19_OUT,
- PJ18_IN, PJ18_OUT,
- PJ17_IN, PJ17_OUT,
- PJ16_IN, PJ16_OUT ))
- },
- { PINMUX_CFG_REG("PJIOR0", 0xfffe3912, 16, 1, GROUP(
- PJ15_IN, PJ15_OUT,
- PJ14_IN, PJ14_OUT,
- PJ13_IN, PJ13_OUT,
- PJ12_IN, PJ12_OUT,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
- },
-
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR0", 0xfffe3816, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, PA1_DATA,
- 0, 0, 0, 0, 0, 0, 0, PA0_DATA ))
- },
-
- { PINMUX_DATA_REG("PBDR1", 0xfffe3834, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, PB22_DATA, PB21_DATA, PB20_DATA,
- PB19_DATA, PB18_DATA, PB17_DATA, PB16_DATA ))
- },
- { PINMUX_DATA_REG("PBDR0", 0xfffe3836, 16, GROUP(
- PB15_DATA, PB14_DATA, PB13_DATA, PB12_DATA,
- PB11_DATA, PB10_DATA, PB9_DATA, PB8_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, 0 ))
- },
-
- { PINMUX_DATA_REG("PCDR0", 0xfffe3856, 16, GROUP(
- 0, 0, 0, 0,
- 0, 0, 0, PC8_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
-
- { PINMUX_DATA_REG("PDDR0", 0xfffe3876, 16, GROUP(
- PD15_DATA, PD14_DATA, PD13_DATA, PD12_DATA,
- PD11_DATA, PD10_DATA, PD9_DATA, PD8_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
-
- { PINMUX_DATA_REG("PEDR0", 0xfffe3896, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
-
- { PINMUX_DATA_REG("PFDR1", 0xfffe38b4, 16, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF23_DATA, PF22_DATA, PF21_DATA, PF20_DATA,
- PF19_DATA, PF18_DATA, PF17_DATA, PF16_DATA ))
- },
- { PINMUX_DATA_REG("PFDR0", 0xfffe38b6, 16, GROUP(
- PF15_DATA, PF14_DATA, PF13_DATA, PF12_DATA,
- PF11_DATA, PF10_DATA, PF9_DATA, PF8_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
-
- { PINMUX_DATA_REG("PGDR1", 0xfffe38d4, 16, GROUP(
- 0, 0, 0, 0,
- PG27_DATA, PG26_DATA, PG25_DATA, PG24_DATA,
- PG23_DATA, PG22_DATA, PG21_DATA, PG20_DATA,
- PG19_DATA, PG18_DATA, PG17_DATA, PG16_DATA ))
- },
- { PINMUX_DATA_REG("PGDR0", 0xfffe38d6, 16, GROUP(
- PG15_DATA, PG14_DATA, PG13_DATA, PG12_DATA,
- PG11_DATA, PG10_DATA, PG9_DATA, PG8_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
-
- { PINMUX_DATA_REG("PJDR1", 0xfffe3914, 16, GROUP(
- PJ31_DATA, PJ30_DATA, PJ29_DATA, PJ28_DATA,
- PJ27_DATA, PJ26_DATA, PJ25_DATA, PJ24_DATA,
- PJ23_DATA, PJ22_DATA, PJ21_DATA, PJ20_DATA,
- PJ19_DATA, PJ18_DATA, PJ17_DATA, PJ16_DATA ))
- },
- { PINMUX_DATA_REG("PJDR0", 0xfffe3916, 16, GROUP(
- PJ15_DATA, PJ14_DATA, PJ13_DATA, PJ12_DATA,
- PJ11_DATA, PJ10_DATA, PJ9_DATA, PJ8_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
-
- { }
-};
-
-const struct sh_pfc_soc_info sh7269_pinmux_info = {
- .name = "sh7269_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7720.c b/drivers/pinctrl/renesas/pfc-sh7720.c
deleted file mode 100644
index 6eedcc5bbb4d67..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7720.c
+++ /dev/null
@@ -1,1201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7720 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7720.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, PTL3_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTP4_DATA, PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN, PTL3_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTP4_IN, PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS4_IN, PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF0_OUT,
- PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT, PTL3_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTP4_OUT, PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS4_OUT, PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN, PTL3_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTP4_FN, PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS4_FN, PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV4_FN, PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
-
- PSELA_1_0_00, PSELA_1_0_01, PSELA_1_0_10,
- PSELA_3_2_00, PSELA_3_2_01, PSELA_3_2_10, PSELA_3_2_11,
- PSELA_5_4_00, PSELA_5_4_01, PSELA_5_4_10, PSELA_5_4_11,
- PSELA_7_6_00, PSELA_7_6_01, PSELA_7_6_10,
- PSELA_9_8_00, PSELA_9_8_01, PSELA_9_8_10,
- PSELA_11_10_00, PSELA_11_10_01, PSELA_11_10_10,
- PSELA_13_12_00, PSELA_13_12_10,
- PSELA_15_14_00, PSELA_15_14_10,
- PSELB_9_8_00, PSELB_9_8_11,
- PSELB_11_10_00, PSELB_11_10_01, PSELB_11_10_10, PSELB_11_10_11,
- PSELB_13_12_00, PSELB_13_12_01, PSELB_13_12_10, PSELB_13_12_11,
- PSELB_15_14_00, PSELB_15_14_11,
- PSELC_9_8_00, PSELC_9_8_10,
- PSELC_11_10_00, PSELC_11_10_10,
- PSELC_13_12_00, PSELC_13_12_01, PSELC_13_12_10,
- PSELC_15_14_00, PSELC_15_14_01, PSELC_15_14_10,
- PSELD_1_0_00, PSELD_1_0_10,
- PSELD_11_10_00, PSELD_11_10_01,
- PSELD_15_14_00, PSELD_15_14_01, PSELD_15_14_10,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, RAS_MARK, CAS_MARK, CKE_MARK,
- CS5B_CE1A_MARK, CS6B_CE1B_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- A21_MARK, A20_MARK, A19_MARK, A0_MARK,
- REFOUT_MARK, IRQOUT_MARK,
- LCD_DATA15_MARK, LCD_DATA14_MARK,
- LCD_DATA13_MARK, LCD_DATA12_MARK,
- LCD_DATA11_MARK, LCD_DATA10_MARK,
- LCD_DATA9_MARK, LCD_DATA8_MARK,
- LCD_DATA7_MARK, LCD_DATA6_MARK,
- LCD_DATA5_MARK, LCD_DATA4_MARK,
- LCD_DATA3_MARK, LCD_DATA2_MARK,
- LCD_DATA1_MARK, LCD_DATA0_MARK,
- LCD_M_DISP_MARK,
- LCD_CL1_MARK, LCD_CL2_MARK,
- LCD_DON_MARK, LCD_FLM_MARK,
- LCD_VEPWC_MARK, LCD_VCPWC_MARK,
- AFE_RXIN_MARK, AFE_RDET_MARK,
- AFE_FS_MARK, AFE_TXOUT_MARK,
- AFE_SCLK_MARK, AFE_RLYCNT_MARK,
- AFE_HC1_MARK,
- IIC_SCL_MARK, IIC_SDA_MARK,
- DA1_MARK, DA0_MARK,
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
- USB1D_RCV_MARK, USB1D_TXSE0_MARK,
- USB1D_TXDPLS_MARK, USB1D_DMNS_MARK,
- USB1D_DPLS_MARK, USB1D_SPEED_MARK,
- USB1D_TXENL_MARK,
- USB2_PWR_EN_MARK, USB1_PWR_EN_USBF_UPLUP_MARK, USB1D_SUSPEND_MARK,
- IRQ5_MARK, IRQ4_MARK,
- IRQ3_IRL3_MARK, IRQ2_IRL2_MARK,
- IRQ1_IRL1_MARK, IRQ0_IRL0_MARK,
- PCC_REG_MARK, PCC_DRV_MARK,
- PCC_BVD2_MARK, PCC_BVD1_MARK,
- PCC_CD2_MARK, PCC_CD1_MARK,
- PCC_RESET_MARK, PCC_RDY_MARK,
- PCC_VS2_MARK, PCC_VS1_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK, ASEBRKAK_MARK, TRST_MARK,
- TMS_MARK, TDO_MARK, TDI_MARK, TCK_MARK,
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
- TEND1_MARK, TEND0_MARK,
- SIOF0_SYNC_MARK, SIOF0_MCLK_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF0_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_MCLK_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIOF1_SCK_MARK,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- TPU_TO1_MARK, TPU_TO0_MARK,
- TPU_TI3B_MARK, TPU_TI3A_MARK,
- TPU_TI2B_MARK, TPU_TI2A_MARK,
- TPU_TO3_MARK, TPU_TO2_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- MMC_DAT_MARK, MMC_CMD_MARK,
- MMC_CLK_MARK, MMC_VDDON_MARK,
- MMC_ODMOD_MARK,
- STATUS0_MARK, STATUS1_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE6_DATA, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF6_DATA, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTP GPIO */
- PINMUX_DATA(PTP4_DATA, PTP4_IN, PTP4_OUT),
- PINMUX_DATA(PTP3_DATA, PTP3_IN, PTP3_OUT),
- PINMUX_DATA(PTP2_DATA, PTP2_IN, PTP2_OUT),
- PINMUX_DATA(PTP1_DATA, PTP1_IN, PTP1_OUT),
- PINMUX_DATA(PTP0_DATA, PTP0_IN, PTP0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PTA7_FN),
- PINMUX_DATA(D22_MARK, PTA6_FN),
- PINMUX_DATA(D21_MARK, PTA5_FN),
- PINMUX_DATA(D20_MARK, PTA4_FN),
- PINMUX_DATA(D19_MARK, PTA3_FN),
- PINMUX_DATA(D18_MARK, PTA2_FN),
- PINMUX_DATA(D17_MARK, PTA1_FN),
- PINMUX_DATA(D16_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PTB2_FN),
- PINMUX_DATA(D25_MARK, PTB1_FN),
- PINMUX_DATA(D24_MARK, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCD_DATA7_MARK, PTC7_FN),
- PINMUX_DATA(LCD_DATA6_MARK, PTC6_FN),
- PINMUX_DATA(LCD_DATA5_MARK, PTC5_FN),
- PINMUX_DATA(LCD_DATA4_MARK, PTC4_FN),
- PINMUX_DATA(LCD_DATA3_MARK, PTC3_FN),
- PINMUX_DATA(LCD_DATA2_MARK, PTC2_FN),
- PINMUX_DATA(LCD_DATA1_MARK, PTC1_FN),
- PINMUX_DATA(LCD_DATA0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCD_DATA15_MARK, PTD7_FN),
- PINMUX_DATA(LCD_DATA14_MARK, PTD6_FN),
- PINMUX_DATA(LCD_DATA13_MARK, PTD5_FN),
- PINMUX_DATA(LCD_DATA12_MARK, PTD4_FN),
- PINMUX_DATA(LCD_DATA11_MARK, PTD3_FN),
- PINMUX_DATA(LCD_DATA10_MARK, PTD2_FN),
- PINMUX_DATA(LCD_DATA9_MARK, PTD1_FN),
- PINMUX_DATA(LCD_DATA8_MARK, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(IIC_SCL_MARK, PSELB_9_8_00, PTE6_FN),
- PINMUX_DATA(AFE_RXIN_MARK, PSELB_9_8_11, PTE6_FN),
- PINMUX_DATA(IIC_SDA_MARK, PSELB_9_8_00, PTE5_FN),
- PINMUX_DATA(AFE_RDET_MARK, PSELB_9_8_11, PTE5_FN),
- PINMUX_DATA(LCD_M_DISP_MARK, PTE4_FN),
- PINMUX_DATA(LCD_CL1_MARK, PTE3_FN),
- PINMUX_DATA(LCD_CL2_MARK, PTE2_FN),
- PINMUX_DATA(LCD_DON_MARK, PTE1_FN),
- PINMUX_DATA(LCD_FLM_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(DA1_MARK, PTF6_FN),
- PINMUX_DATA(DA0_MARK, PTF5_FN),
- PINMUX_DATA(AN3_MARK, PTF4_FN),
- PINMUX_DATA(AN2_MARK, PTF3_FN),
- PINMUX_DATA(AN1_MARK, PTF2_FN),
- PINMUX_DATA(AN0_MARK, PTF1_FN),
- PINMUX_DATA(ADTRG_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(USB1D_RCV_MARK, PSELA_3_2_00, PTG6_FN),
- PINMUX_DATA(AFE_FS_MARK, PSELA_3_2_01, PTG6_FN),
- PINMUX_DATA(PCC_REG_MARK, PSELA_3_2_10, PTG6_FN),
- PINMUX_DATA(IRQ5_MARK, PSELA_3_2_11, PTG6_FN),
- PINMUX_DATA(USB1D_TXSE0_MARK, PSELA_5_4_00, PTG5_FN),
- PINMUX_DATA(AFE_TXOUT_MARK, PSELA_5_4_01, PTG5_FN),
- PINMUX_DATA(PCC_DRV_MARK, PSELA_5_4_10, PTG5_FN),
- PINMUX_DATA(IRQ4_MARK, PSELA_5_4_11, PTG5_FN),
- PINMUX_DATA(USB1D_TXDPLS_MARK, PSELA_7_6_00, PTG4_FN),
- PINMUX_DATA(AFE_SCLK_MARK, PSELA_7_6_01, PTG4_FN),
- PINMUX_DATA(IOIS16_MARK, PSELA_7_6_10, PTG4_FN),
- PINMUX_DATA(USB1D_DMNS_MARK, PSELA_9_8_00, PTG3_FN),
- PINMUX_DATA(AFE_RLYCNT_MARK, PSELA_9_8_01, PTG3_FN),
- PINMUX_DATA(PCC_BVD2_MARK, PSELA_9_8_10, PTG3_FN),
- PINMUX_DATA(USB1D_DPLS_MARK, PSELA_11_10_00, PTG2_FN),
- PINMUX_DATA(AFE_HC1_MARK, PSELA_11_10_01, PTG2_FN),
- PINMUX_DATA(PCC_BVD1_MARK, PSELA_11_10_10, PTG2_FN),
- PINMUX_DATA(USB1D_SPEED_MARK, PSELA_13_12_00, PTG1_FN),
- PINMUX_DATA(PCC_CD2_MARK, PSELA_13_12_10, PTG1_FN),
- PINMUX_DATA(USB1D_TXENL_MARK, PSELA_15_14_00, PTG0_FN),
- PINMUX_DATA(PCC_CD1_MARK, PSELA_15_14_10, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(RAS_MARK, PTH6_FN),
- PINMUX_DATA(CAS_MARK, PTH5_FN),
- PINMUX_DATA(CKE_MARK, PTH4_FN),
- PINMUX_DATA(STATUS1_MARK, PTH3_FN),
- PINMUX_DATA(STATUS0_MARK, PTH2_FN),
- PINMUX_DATA(USB2_PWR_EN_MARK, PTH1_FN),
- PINMUX_DATA(USB1_PWR_EN_USBF_UPLUP_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(AUDCK_MARK, PTJ6_FN),
- PINMUX_DATA(ASEBRKAK_MARK, PTJ5_FN),
- PINMUX_DATA(AUDATA3_MARK, PTJ4_FN),
- PINMUX_DATA(AUDATA2_MARK, PTJ3_FN),
- PINMUX_DATA(AUDATA1_MARK, PTJ2_FN),
- PINMUX_DATA(AUDATA0_MARK, PTJ1_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(PCC_RESET_MARK, PTK3_FN),
- PINMUX_DATA(PCC_RDY_MARK, PTK2_FN),
- PINMUX_DATA(PCC_VS2_MARK, PTK1_FN),
- PINMUX_DATA(PCC_VS1_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(TRST_MARK, PTL7_FN),
- PINMUX_DATA(TMS_MARK, PTL6_FN),
- PINMUX_DATA(TDO_MARK, PTL5_FN),
- PINMUX_DATA(TDI_MARK, PTL4_FN),
- PINMUX_DATA(TCK_MARK, PTL3_FN),
-
- /* PTM FN */
- PINMUX_DATA(DREQ1_MARK, PTM7_FN),
- PINMUX_DATA(DREQ0_MARK, PTM6_FN),
- PINMUX_DATA(DACK1_MARK, PTM5_FN),
- PINMUX_DATA(DACK0_MARK, PTM4_FN),
- PINMUX_DATA(TEND1_MARK, PTM3_FN),
- PINMUX_DATA(TEND0_MARK, PTM2_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTM1_FN),
- PINMUX_DATA(CS6B_CE1B_MARK, PTM0_FN),
-
- /* PTP FN */
- PINMUX_DATA(USB1D_SUSPEND_MARK, PSELA_1_0_00, PTP4_FN),
- PINMUX_DATA(REFOUT_MARK, PSELA_1_0_01, PTP4_FN),
- PINMUX_DATA(IRQOUT_MARK, PSELA_1_0_10, PTP4_FN),
- PINMUX_DATA(IRQ3_IRL3_MARK, PTP3_FN),
- PINMUX_DATA(IRQ2_IRL2_MARK, PTP2_FN),
- PINMUX_DATA(IRQ1_IRL1_MARK, PTP1_FN),
- PINMUX_DATA(IRQ0_IRL0_MARK, PTP0_FN),
-
- /* PTR FN */
- PINMUX_DATA(A25_MARK, PTR7_FN),
- PINMUX_DATA(A24_MARK, PTR6_FN),
- PINMUX_DATA(A23_MARK, PTR5_FN),
- PINMUX_DATA(A22_MARK, PTR4_FN),
- PINMUX_DATA(A21_MARK, PTR3_FN),
- PINMUX_DATA(A20_MARK, PTR2_FN),
- PINMUX_DATA(A19_MARK, PTR1_FN),
- PINMUX_DATA(A0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SIOF0_SYNC_MARK, PTS4_FN),
- PINMUX_DATA(SIOF0_MCLK_MARK, PTS3_FN),
- PINMUX_DATA(SIOF0_TXD_MARK, PTS2_FN),
- PINMUX_DATA(SIOF0_RXD_MARK, PTS1_FN),
- PINMUX_DATA(SIOF0_SCK_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_CTS_MARK, PSELB_15_14_00, PTT4_FN),
- PINMUX_DATA(TPU_TO1_MARK, PSELB_15_14_11, PTT4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, PSELB_15_14_00, PTT3_FN),
- PINMUX_DATA(TPU_TO0_MARK, PSELB_15_14_11, PTT3_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, PTT2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, PTT1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(SIOF1_SYNC_MARK, PTU4_FN),
- PINMUX_DATA(SIOF1_MCLK_MARK, PSELD_11_10_00, PTU3_FN),
- PINMUX_DATA(TPU_TI3B_MARK, PSELD_11_10_01, PTU3_FN),
- PINMUX_DATA(SIOF1_TXD_MARK, PSELD_15_14_00, PTU2_FN),
- PINMUX_DATA(TPU_TI3A_MARK, PSELD_15_14_01, PTU2_FN),
- PINMUX_DATA(MMC_DAT_MARK, PSELD_15_14_10, PTU2_FN),
- PINMUX_DATA(SIOF1_RXD_MARK, PSELC_13_12_00, PTU1_FN),
- PINMUX_DATA(TPU_TI2B_MARK, PSELC_13_12_01, PTU1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PSELC_13_12_10, PTU1_FN),
- PINMUX_DATA(SIOF1_SCK_MARK, PSELC_15_14_00, PTU0_FN),
- PINMUX_DATA(TPU_TI2A_MARK, PSELC_15_14_01, PTU0_FN),
- PINMUX_DATA(MMC_CLK_MARK, PSELC_15_14_10, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(SCIF1_CTS_MARK, PSELB_11_10_00, PTV4_FN),
- PINMUX_DATA(TPU_TO3_MARK, PSELB_11_10_01, PTV4_FN),
- PINMUX_DATA(MMC_VDDON_MARK, PSELB_11_10_10, PTV4_FN),
- PINMUX_DATA(LCD_VEPWC_MARK, PSELB_11_10_11, PTV4_FN),
- PINMUX_DATA(SCIF1_RTS_MARK, PSELB_13_12_00, PTV3_FN),
- PINMUX_DATA(TPU_TO2_MARK, PSELB_13_12_01, PTV3_FN),
- PINMUX_DATA(MMC_ODMOD_MARK, PSELB_13_12_10, PTV3_FN),
- PINMUX_DATA(LCD_VCPWC_MARK, PSELB_13_12_11, PTV3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSELC_9_8_00, PTV2_FN),
- PINMUX_DATA(SIM_D_MARK, PSELC_9_8_10, PTV2_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSELC_11_10_00, PTV1_FN),
- PINMUX_DATA(SIM_RST_MARK, PSELC_11_10_10, PTV1_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSELD_1_0_00, PTV0_FN),
- PINMUX_DATA(SIM_CLK_MARK, PSELD_1_0_10, PTV0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTP */
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(RAS),
- GPIO_FN(CAS),
- GPIO_FN(CKE),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A0),
- GPIO_FN(REFOUT),
- GPIO_FN(IRQOUT),
-
- /* LCDC */
- GPIO_FN(LCD_DATA15),
- GPIO_FN(LCD_DATA14),
- GPIO_FN(LCD_DATA13),
- GPIO_FN(LCD_DATA12),
- GPIO_FN(LCD_DATA11),
- GPIO_FN(LCD_DATA10),
- GPIO_FN(LCD_DATA9),
- GPIO_FN(LCD_DATA8),
- GPIO_FN(LCD_DATA7),
- GPIO_FN(LCD_DATA6),
- GPIO_FN(LCD_DATA5),
- GPIO_FN(LCD_DATA4),
- GPIO_FN(LCD_DATA3),
- GPIO_FN(LCD_DATA2),
- GPIO_FN(LCD_DATA1),
- GPIO_FN(LCD_DATA0),
- GPIO_FN(LCD_M_DISP),
- GPIO_FN(LCD_CL1),
- GPIO_FN(LCD_CL2),
- GPIO_FN(LCD_DON),
- GPIO_FN(LCD_FLM),
- GPIO_FN(LCD_VEPWC),
- GPIO_FN(LCD_VCPWC),
-
- /* AFEIF */
- GPIO_FN(AFE_RXIN),
- GPIO_FN(AFE_RDET),
- GPIO_FN(AFE_FS),
- GPIO_FN(AFE_TXOUT),
- GPIO_FN(AFE_SCLK),
- GPIO_FN(AFE_RLYCNT),
- GPIO_FN(AFE_HC1),
-
- /* IIC */
- GPIO_FN(IIC_SCL),
- GPIO_FN(IIC_SDA),
-
- /* DAC */
- GPIO_FN(DA1),
- GPIO_FN(DA0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* USB */
- GPIO_FN(USB1D_RCV),
- GPIO_FN(USB1D_TXSE0),
- GPIO_FN(USB1D_TXDPLS),
- GPIO_FN(USB1D_DMNS),
- GPIO_FN(USB1D_DPLS),
- GPIO_FN(USB1D_SPEED),
- GPIO_FN(USB1D_TXENL),
-
- GPIO_FN(USB2_PWR_EN),
- GPIO_FN(USB1_PWR_EN_USBF_UPLUP),
- GPIO_FN(USB1D_SUSPEND),
-
- /* INTC */
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3_IRL3),
- GPIO_FN(IRQ2_IRL2),
- GPIO_FN(IRQ1_IRL1),
- GPIO_FN(IRQ0_IRL0),
-
- /* PCC */
- GPIO_FN(PCC_REG),
- GPIO_FN(PCC_DRV),
- GPIO_FN(PCC_BVD2),
- GPIO_FN(PCC_BVD1),
- GPIO_FN(PCC_CD2),
- GPIO_FN(PCC_CD1),
- GPIO_FN(PCC_RESET),
- GPIO_FN(PCC_RDY),
- GPIO_FN(PCC_VS2),
- GPIO_FN(PCC_VS1),
-
- /* HUDI */
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(ASEBRKAK),
- GPIO_FN(TRST),
- GPIO_FN(TMS),
- GPIO_FN(TDO),
- GPIO_FN(TDI),
- GPIO_FN(TCK),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
- GPIO_FN(TEND1),
- GPIO_FN(TEND0),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_MCLK),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
- GPIO_FN(SIOF0_SCK),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_MCLK),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
- GPIO_FN(SIOF1_SCK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* TPU */
- GPIO_FN(TPU_TO1),
- GPIO_FN(TPU_TO0),
- GPIO_FN(TPU_TI3B),
- GPIO_FN(TPU_TI3A),
- GPIO_FN(TPU_TI2B),
- GPIO_FN(TPU_TI2A),
- GPIO_FN(TPU_TO3),
- GPIO_FN(TPU_TO2),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* MMC */
- GPIO_FN(MMC_DAT),
- GPIO_FN(MMC_CMD),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_VDDON),
- GPIO_FN(MMC_ODMOD),
-
- /* SYSC */
- GPIO_FN(STATUS0),
- GPIO_FN(STATUS1),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTE6_FN, 0, 0, PTE6_IN,
- PTE5_FN, 0, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6_FN, 0, 0, PTF6_IN,
- PTF5_FN, 0, 0, PTF5_IN,
- PTF4_FN, 0, 0, PTF4_IN,
- PTF3_FN, 0, 0, PTF3_IN,
- PTF2_FN, 0, 0, PTF2_IN,
- PTF1_FN, 0, 0, PTF1_IN,
- PTF0_FN, 0, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTG6_FN, PTG6_OUT, 0, PTG6_IN,
- PTG5_FN, PTG5_OUT, 0, PTG5_IN,
- PTG4_FN, PTG4_OUT, 0, PTG4_IN,
- PTG3_FN, PTG3_OUT, 0, PTG3_IN,
- PTG2_FN, PTG2_OUT, 0, PTG2_IN,
- PTG1_FN, PTG1_OUT, 0, PTG1_IN,
- PTG0_FN, PTG0_OUT, 0, PTG0_IN ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, PTJ6_IN,
- PTJ5_FN, PTJ5_OUT, 0, PTJ5_IN,
- PTJ4_FN, PTJ4_OUT, 0, PTJ4_IN,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PKCR", 0xa4050112, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PLCR", 0xa4050114, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xa4050118, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTP4_FN, PTP4_OUT, 0, PTP4_IN,
- PTP3_FN, PTP3_OUT, 0, PTP3_IN,
- PTP2_FN, PTP2_OUT, 0, PTP2_IN,
- PTP1_FN, PTP1_OUT, 0, PTP1_IN,
- PTP0_FN, PTP0_OUT, 0, PTP0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011a, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, PTR3_OUT, 0, PTR3_IN,
- PTR2_FN, PTR2_OUT, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050120, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050122, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050140, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050142, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050144, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050148, 8, GROUP(
- 0, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405014a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405014c, 8, GROUP(
- 0, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405014e, 8, GROUP(
- 0, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050150, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050152, 8, GROUP(
- 0, 0, 0, 0,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050154, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050156, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xa4050158, 8, GROUP(
- 0, 0, 0, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405015a, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405015c, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa405015e, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7720_pinmux_info = {
- .name = "sh7720_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7722.c b/drivers/pinctrl/renesas/pfc-sh7722.c
deleted file mode 100644
index 4b82ac2c5e91d7..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7722.c
+++ /dev/null
@@ -1,1703 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <cpu/sh7722.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC5_DATA, PTC4_DATA, PTC3_DATA, PTC2_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, PTE1_DATA, PTE0_DATA,
- PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR4_DATA, PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS4_DATA, PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV4_DATA, PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ5_DATA, PTZ4_DATA, PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC5_IN, PTC4_IN, PTC3_IN, PTC2_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN, PTD3_IN, PTD2_IN, PTD1_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN, PTE1_IN, PTE0_IN,
- PTF6_IN, PTF5_IN, PTF4_IN, PTF3_IN, PTF2_IN, PTF1_IN,
- PTH6_IN, PTH5_IN, PTH1_IN, PTH0_IN,
- PTJ1_IN, PTJ0_IN,
- PTK6_IN, PTK5_IN, PTK4_IN, PTK3_IN, PTK2_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ5_IN, PTQ4_IN, PTQ3_IN, PTQ2_IN, PTQ0_IN,
- PTR2_IN,
- PTS4_IN, PTS2_IN, PTS1_IN,
- PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN,
- PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV4_IN, PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW6_IN, PTW4_IN, PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX6_IN, PTX5_IN, PTX4_IN, PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY5_IN, PTY4_IN, PTY3_IN, PTY2_IN, PTY0_IN,
- PTZ5_IN, PTZ4_IN, PTZ3_IN, PTZ2_IN, PTZ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA5_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC4_OUT, PTC3_OUT, PTC2_OUT, PTC0_OUT,
- PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT, PTE1_OUT, PTE0_OUT,
- PTF6_OUT, PTF5_OUT, PTF4_OUT, PTF3_OUT, PTF2_OUT, PTF0_OUT,
- PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK6_OUT, PTK5_OUT, PTK4_OUT, PTK3_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR4_OUT, PTR3_OUT, PTR1_OUT, PTR0_OUT,
- PTS3_OUT, PTS2_OUT, PTS0_OUT,
- PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT0_OUT,
- PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU0_OUT,
- PTV4_OUT, PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW5_OUT, PTW4_OUT, PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX6_OUT, PTX5_OUT, PTX4_OUT, PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY5_OUT, PTY4_OUT, PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_TXD_MARK, SCIF0_RXD_MARK,
- SCIF0_RTS_MARK, SCIF0_CTS_MARK, SCIF0_SCK_MARK,
- SCIF1_TXD_MARK, SCIF1_RXD_MARK,
- SCIF1_RTS_MARK, SCIF1_CTS_MARK, SCIF1_SCK_MARK,
- SCIF2_TXD_MARK, SCIF2_RXD_MARK,
- SCIF2_RTS_MARK, SCIF2_CTS_MARK, SCIF2_SCK_MARK,
- SIOTXD_MARK, SIORXD_MARK,
- SIOD_MARK, SIOSTRB0_MARK, SIOSTRB1_MARK,
- SIOSCK_MARK, SIOMCK_MARK,
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_CLK_MARK, VIO_VD_MARK, VIO_HD_MARK, VIO_FLD_MARK,
- VIO_CKO_MARK, VIO_STEX_MARK, VIO_STEM_MARK, VIO_VD2_MARK,
- VIO_HD2_MARK, VIO_CLK2_MARK,
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDLCLK_MARK, LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDDON2_MARK, LCDVCPWC2_MARK, LCDVEPWC2_MARK, LCDVSYN2_MARK,
- LCDCS2_MARK,
- IOIS16_MARK, A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- BS_MARK, CS6B_CE1B_MARK, WAIT_MARK, CS6A_CE2B_MARK,
- HPD63_MARK, HPD62_MARK, HPD61_MARK, HPD60_MARK,
- HPD59_MARK, HPD58_MARK, HPD57_MARK, HPD56_MARK,
- HPD55_MARK, HPD54_MARK, HPD53_MARK, HPD52_MARK,
- HPD51_MARK, HPD50_MARK, HPD49_MARK, HPD48_MARK,
- HPDQM7_MARK, HPDQM6_MARK, HPDQM5_MARK, HPDQM4_MARK,
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
- SDHICD_MARK, SDHIWP_MARK, SDHID3_MARK, SDHID2_MARK,
- SDHID1_MARK, SDHID0_MARK, SDHICMD_MARK, SDHICLK_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAISLD_MARK, SIUAILR_MARK,
- SIUAIBT_MARK, SIUAOSLD_MARK, SIUMCKA_MARK, SIUFCKA_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBISLD_MARK, SIUBILR_MARK,
- SIUBIBT_MARK, SIUBOSLD_MARK, SIUMCKB_MARK, SIUFCKB_MARK,
- AUDSYNC_MARK, AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- DACK_MARK, DREQ0_MARK,
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
- STATUS0_MARK, PDSTATUS_MARK,
- SIOF0_MCK_MARK, SIOF0_SCK_MARK,
- SIOF0_SYNC_MARK, SIOF0_SS1_MARK, SIOF0_SS2_MARK,
- SIOF0_TXD_MARK, SIOF0_RXD_MARK,
- SIOF1_MCK_MARK, SIOF1_SCK_MARK,
- SIOF1_SYNC_MARK, SIOF1_SS1_MARK, SIOF1_SS2_MARK,
- SIOF1_TXD_MARK, SIOF1_RXD_MARK,
- SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
- TS_SDAT_MARK, TS_SCK_MARK, TS_SDEN_MARK, TS_SPSYNC_MARK,
- IRDA_IN_MARK, IRDA_OUT_MARK,
- TPUTO_MARK,
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
- PINMUX_MARK_END,
-
- PINMUX_FUNCTION_BEGIN,
- VIO_D7_SCIF1_SCK, VIO_D6_SCIF1_RXD, VIO_D5_SCIF1_TXD, VIO_D4,
- VIO_D3, VIO_D2, VIO_D1, VIO_D0_LCDLCLK,
- HPD55, HPD54, HPD53, HPD52, HPD51, HPD50, HPD49, HPD48,
- IOIS16, HPDQM7, HPDQM6, HPDQM5, HPDQM4,
- SDHICD, SDHIWP, SDHID3, IRQ2_SDHID2, SDHID1, SDHID0, SDHICMD, SDHICLK,
- A25, A24, A23, A22, IRQ5, IRQ4_BS,
- PTF6, SIOSCK_SIUBOBT, SIOSTRB1_SIUBOLR,
- SIOSTRB0_SIUBIBT, SIOD_SIUBILR, SIORXD_SIUBISLD, SIOTXD_SIUBOSLD,
- AUDSYNC, AUDATA3, AUDATA2, AUDATA1, AUDATA0,
- LCDVCPWC_LCDVCPWC2, LCDVSYN2_DACK, LCDVSYN, LCDDISP_LCDRS,
- LCDHSYN_LCDCS, LCDDON_LCDDON2, LCDD17_DV_HSYNC, LCDD16_DV_VSYNC,
- STATUS0, PDSTATUS, IRQ1, IRQ0,
- SIUAILR_SIOF1_SS2, SIUAIBT_SIOF1_SS1, SIUAOLR_SIOF1_SYNC,
- SIUAOBT_SIOF1_SCK, SIUAISLD_SIOF1_RXD, SIUAOSLD_SIOF1_TXD, PTK0,
- LCDD15_DV_D15, LCDD14_DV_D14, LCDD13_DV_D13, LCDD12_DV_D12,
- LCDD11_DV_D11, LCDD10_DV_D10, LCDD9_DV_D9, LCDD8_DV_D8,
- LCDD7_DV_D7, LCDD6_DV_D6, LCDD5_DV_D5, LCDD4_DV_D4,
- LCDD3_DV_D3, LCDD2_DV_D2, LCDD1_DV_D1, LCDD0_DV_D0,
- HPD63, HPD62, HPD61, HPD60, HPD59, HPD58, HPD57, HPD56,
- SIOF0_SS2_SIM_RST, SIOF0_SS1_TS_SPSYNC, SIOF0_SYNC_TS_SDEN,
- SIOF0_SCK_TS_SCK, PTQ2, PTQ1, PTQ0,
- LCDRD, CS6B_CE1B_LCDCS2, WAIT, LCDDCK_LCDWR, LCDVEPWC_LCDVEPWC2,
- SCIF0_CTS_SIUAISPD, SCIF0_RTS_SIUAOSPD,
- SCIF0_SCK_TPUTO, SCIF0_RXD, SCIF0_TXD,
- FOE_VIO_VD2, FWE, FSC, DREQ0, FCDE,
- NAF2_VIO_D10, NAF1_VIO_D9, NAF0_VIO_D8,
- FRB_VIO_CLK2, FCE_VIO_HD2,
- NAF7_VIO_D15, NAF6_VIO_D14, NAF5_VIO_D13, NAF4_VIO_D12, NAF3_VIO_D11,
- VIO_FLD_SCIF2_CTS, VIO_CKO_SCIF2_RTS, VIO_STEX_SCIF2_SCK,
- VIO_STEM_SCIF2_TXD, VIO_HD_SCIF2_RXD,
- VIO_VD_SCIF1_CTS, VIO_CLK_SCIF1_RTS,
- CS6A_CE2B, LCDD23, LCDD22, LCDD21, LCDD20,
- LCDD19_DV_CLKI, LCDD18_DV_CLK,
- KEYOUT5_IN5, KEYOUT4_IN6, KEYOUT3, KEYOUT2, KEYOUT1, KEYOUT0,
- KEYIN4_IRQ7, KEYIN3, KEYIN2, KEYIN1, KEYIN0_IRQ6,
-
- PSA15_KEYIN0, PSA15_IRQ6, PSA14_KEYIN4, PSA14_IRQ7,
- PSA9_IRQ4, PSA9_BS, PSA4_IRQ2, PSA4_SDHID2,
- PSB15_SIOTXD, PSB15_SIUBOSLD, PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR, PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR, PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB, PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT, PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK, PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC, PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK, PSB0_SIUAOSLD, PSB0_SIOF1_TXD,
- PSC15_SIUAISLD, PSC15_SIOF1_RXD, PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC, PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2, PSC0_NAF, PSC0_VIO,
- PSD13_VIO, PSD13_SCIF2, PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1, PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB, PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD, PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2, PSD0_LCDD19_LCDD0, PSD0_DV,
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT, PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- PSE3_FLCTL, PSE3_VIO, PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9, PSE0_NAF0, PSE0_VIO_D8,
-
- HIZA14_KEYSC, HIZA14_HIZ,
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- HIZB4_SIUA, HIZB4_HIZ,
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ,
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- PINMUX_FUNCTION_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN),
- PINMUX_DATA(PTA3_DATA, PTA3_IN),
- PINMUX_DATA(PTA2_DATA, PTA2_IN),
- PINMUX_DATA(PTA1_DATA, PTA1_IN),
- PINMUX_DATA(PTA0_DATA, PTA0_IN),
-
- /* PTB */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC */
- PINMUX_DATA(PTC7_DATA, PTC7_IN),
- PINMUX_DATA(PTC5_DATA, PTC5_IN),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD */
- PINMUX_DATA(PTD7_DATA, PTD7_IN),
- PINMUX_DATA(PTD6_DATA, PTD6_OUT, PTD6_IN),
- PINMUX_DATA(PTD5_DATA, PTD5_OUT, PTD5_IN),
- PINMUX_DATA(PTD4_DATA, PTD4_OUT, PTD4_IN),
- PINMUX_DATA(PTD3_DATA, PTD3_OUT, PTD3_IN),
- PINMUX_DATA(PTD2_DATA, PTD2_OUT, PTD2_IN),
- PINMUX_DATA(PTD1_DATA, PTD1_OUT, PTD1_IN),
- PINMUX_DATA(PTD0_DATA, PTD0_OUT),
-
- /* PTE */
- PINMUX_DATA(PTE7_DATA, PTE7_OUT, PTE7_IN),
- PINMUX_DATA(PTE6_DATA, PTE6_OUT, PTE6_IN),
- PINMUX_DATA(PTE5_DATA, PTE5_OUT, PTE5_IN),
- PINMUX_DATA(PTE4_DATA, PTE4_OUT, PTE4_IN),
- PINMUX_DATA(PTE1_DATA, PTE1_OUT, PTE1_IN),
- PINMUX_DATA(PTE0_DATA, PTE0_OUT, PTE0_IN),
-
- /* PTF */
- PINMUX_DATA(PTF6_DATA, PTF6_OUT, PTF6_IN),
- PINMUX_DATA(PTF5_DATA, PTF5_OUT, PTF5_IN),
- PINMUX_DATA(PTF4_DATA, PTF4_OUT, PTF4_IN),
- PINMUX_DATA(PTF3_DATA, PTF3_OUT, PTF3_IN),
- PINMUX_DATA(PTF2_DATA, PTF2_OUT, PTF2_IN),
- PINMUX_DATA(PTF1_DATA, PTF1_IN),
- PINMUX_DATA(PTF0_DATA, PTF0_OUT),
-
- /* PTG */
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH */
- PINMUX_DATA(PTH7_DATA, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_OUT, PTH6_IN),
- PINMUX_DATA(PTH5_DATA, PTH5_OUT, PTH5_IN),
- PINMUX_DATA(PTH4_DATA, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_OUT, PTH1_IN),
- PINMUX_DATA(PTH0_DATA, PTH0_OUT, PTH0_IN),
-
- /* PTJ */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_OUT, PTJ1_IN),
- PINMUX_DATA(PTJ0_DATA, PTJ0_OUT, PTJ0_IN),
-
- /* PTK */
- PINMUX_DATA(PTK6_DATA, PTK6_OUT, PTK6_IN),
- PINMUX_DATA(PTK5_DATA, PTK5_OUT, PTK5_IN),
- PINMUX_DATA(PTK4_DATA, PTK4_OUT, PTK4_IN),
- PINMUX_DATA(PTK3_DATA, PTK3_OUT, PTK3_IN),
- PINMUX_DATA(PTK2_DATA, PTK2_IN),
- PINMUX_DATA(PTK1_DATA, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_OUT, PTK0_IN),
-
- /* PTL */
- PINMUX_DATA(PTL7_DATA, PTL7_OUT, PTL7_IN),
- PINMUX_DATA(PTL6_DATA, PTL6_OUT, PTL6_IN),
- PINMUX_DATA(PTL5_DATA, PTL5_OUT, PTL5_IN),
- PINMUX_DATA(PTL4_DATA, PTL4_OUT, PTL4_IN),
- PINMUX_DATA(PTL3_DATA, PTL3_OUT, PTL3_IN),
- PINMUX_DATA(PTL2_DATA, PTL2_OUT, PTL2_IN),
- PINMUX_DATA(PTL1_DATA, PTL1_OUT, PTL1_IN),
- PINMUX_DATA(PTL0_DATA, PTL0_OUT, PTL0_IN),
-
- /* PTM */
- PINMUX_DATA(PTM7_DATA, PTM7_OUT, PTM7_IN),
- PINMUX_DATA(PTM6_DATA, PTM6_OUT, PTM6_IN),
- PINMUX_DATA(PTM5_DATA, PTM5_OUT, PTM5_IN),
- PINMUX_DATA(PTM4_DATA, PTM4_OUT, PTM4_IN),
- PINMUX_DATA(PTM3_DATA, PTM3_OUT, PTM3_IN),
- PINMUX_DATA(PTM2_DATA, PTM2_OUT, PTM2_IN),
- PINMUX_DATA(PTM1_DATA, PTM1_OUT, PTM1_IN),
- PINMUX_DATA(PTM0_DATA, PTM0_OUT, PTM0_IN),
-
- /* PTN */
- PINMUX_DATA(PTN7_DATA, PTN7_OUT, PTN7_IN),
- PINMUX_DATA(PTN6_DATA, PTN6_OUT, PTN6_IN),
- PINMUX_DATA(PTN5_DATA, PTN5_OUT, PTN5_IN),
- PINMUX_DATA(PTN4_DATA, PTN4_OUT, PTN4_IN),
- PINMUX_DATA(PTN3_DATA, PTN3_OUT, PTN3_IN),
- PINMUX_DATA(PTN2_DATA, PTN2_OUT, PTN2_IN),
- PINMUX_DATA(PTN1_DATA, PTN1_OUT, PTN1_IN),
- PINMUX_DATA(PTN0_DATA, PTN0_OUT, PTN0_IN),
-
- /* PTQ */
- PINMUX_DATA(PTQ6_DATA, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_OUT, PTQ5_IN),
- PINMUX_DATA(PTQ4_DATA, PTQ4_OUT, PTQ4_IN),
- PINMUX_DATA(PTQ3_DATA, PTQ3_OUT, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_OUT, PTQ0_IN),
-
- /* PTR */
- PINMUX_DATA(PTR4_DATA, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_OUT),
-
- /* PTS */
- PINMUX_DATA(PTS4_DATA, PTS4_IN),
- PINMUX_DATA(PTS3_DATA, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_OUT, PTS2_IN),
- PINMUX_DATA(PTS1_DATA, PTS1_IN),
- PINMUX_DATA(PTS0_DATA, PTS0_OUT),
-
- /* PTT */
- PINMUX_DATA(PTT4_DATA, PTT4_OUT, PTT4_IN),
- PINMUX_DATA(PTT3_DATA, PTT3_OUT, PTT3_IN),
- PINMUX_DATA(PTT2_DATA, PTT2_OUT, PTT2_IN),
- PINMUX_DATA(PTT1_DATA, PTT1_IN),
- PINMUX_DATA(PTT0_DATA, PTT0_OUT),
-
- /* PTU */
- PINMUX_DATA(PTU4_DATA, PTU4_OUT, PTU4_IN),
- PINMUX_DATA(PTU3_DATA, PTU3_OUT, PTU3_IN),
- PINMUX_DATA(PTU2_DATA, PTU2_OUT, PTU2_IN),
- PINMUX_DATA(PTU1_DATA, PTU1_IN),
- PINMUX_DATA(PTU0_DATA, PTU0_OUT, PTU0_IN),
-
- /* PTV */
- PINMUX_DATA(PTV4_DATA, PTV4_OUT, PTV4_IN),
- PINMUX_DATA(PTV3_DATA, PTV3_OUT, PTV3_IN),
- PINMUX_DATA(PTV2_DATA, PTV2_OUT, PTV2_IN),
- PINMUX_DATA(PTV1_DATA, PTV1_OUT, PTV1_IN),
- PINMUX_DATA(PTV0_DATA, PTV0_OUT, PTV0_IN),
-
- /* PTW */
- PINMUX_DATA(PTW6_DATA, PTW6_IN),
- PINMUX_DATA(PTW5_DATA, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_OUT, PTW4_IN),
- PINMUX_DATA(PTW3_DATA, PTW3_OUT, PTW3_IN),
- PINMUX_DATA(PTW2_DATA, PTW2_OUT, PTW2_IN),
- PINMUX_DATA(PTW1_DATA, PTW1_OUT, PTW1_IN),
- PINMUX_DATA(PTW0_DATA, PTW0_OUT, PTW0_IN),
-
- /* PTX */
- PINMUX_DATA(PTX6_DATA, PTX6_OUT, PTX6_IN),
- PINMUX_DATA(PTX5_DATA, PTX5_OUT, PTX5_IN),
- PINMUX_DATA(PTX4_DATA, PTX4_OUT, PTX4_IN),
- PINMUX_DATA(PTX3_DATA, PTX3_OUT, PTX3_IN),
- PINMUX_DATA(PTX2_DATA, PTX2_OUT, PTX2_IN),
- PINMUX_DATA(PTX1_DATA, PTX1_OUT, PTX1_IN),
- PINMUX_DATA(PTX0_DATA, PTX0_OUT, PTX0_IN),
-
- /* PTY */
- PINMUX_DATA(PTY5_DATA, PTY5_OUT, PTY5_IN),
- PINMUX_DATA(PTY4_DATA, PTY4_OUT, PTY4_IN),
- PINMUX_DATA(PTY3_DATA, PTY3_OUT, PTY3_IN),
- PINMUX_DATA(PTY2_DATA, PTY2_OUT, PTY2_IN),
- PINMUX_DATA(PTY1_DATA, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_OUT, PTY0_IN),
-
- /* PTZ */
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN),
-
- /* SCIF0 */
- PINMUX_DATA(SCIF0_TXD_MARK, SCIF0_TXD),
- PINMUX_DATA(SCIF0_RXD_MARK, SCIF0_RXD),
- PINMUX_DATA(SCIF0_RTS_MARK, PSD7_SCIF0_RTS, SCIF0_RTS_SIUAOSPD),
- PINMUX_DATA(SCIF0_CTS_MARK, PSD6_SCIF0_CTS, SCIF0_CTS_SIUAISPD),
- PINMUX_DATA(SCIF0_SCK_MARK, PSD8_SCIF0_SCK, SCIF0_SCK_TPUTO),
-
- /* SCIF1 */
- PINMUX_DATA(SCIF1_TXD_MARK, PSD11_SCIF1, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(SCIF1_RXD_MARK, PSD11_SCIF1, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(SCIF1_RTS_MARK, PSD12_SCIF1, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(SCIF1_CTS_MARK, PSD12_SCIF1, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(SCIF1_SCK_MARK, PSD11_SCIF1, VIO_D7_SCIF1_SCK),
-
- /* SCIF2 */
- PINMUX_DATA(SCIF2_TXD_MARK, PSD13_SCIF2, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(SCIF2_RXD_MARK, PSD13_SCIF2, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(SCIF2_RTS_MARK, PSD13_SCIF2, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(SCIF2_CTS_MARK, PSD13_SCIF2, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(SCIF2_SCK_MARK, PSD13_SCIF2, VIO_STEX_SCIF2_SCK),
-
- /* SIO */
- PINMUX_DATA(SIOTXD_MARK, PSB15_SIOTXD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIORXD_MARK, PSB14_SIORXD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIOD_MARK, PSB13_SIOD, SIOD_SIUBILR),
- PINMUX_DATA(SIOSTRB0_MARK, PSB12_SIOSTRB0, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIOSTRB1_MARK, PSB11_SIOSTRB1, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIOSCK_MARK, PSB10_SIOSCK, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIOMCK_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIOMCK, PTF6),
-
- /* CEU */
- PINMUX_DATA(VIO_D15_MARK, PSC0_VIO, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(VIO_D14_MARK, PSC0_VIO, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(VIO_D13_MARK, PSC0_VIO, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(VIO_D12_MARK, PSC0_VIO, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(VIO_D11_MARK, PSC0_VIO, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(VIO_D10_MARK, PSE2_VIO_D10, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(VIO_D9_MARK, PSE1_VIO_D9, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(VIO_D8_MARK, PSE0_VIO_D8, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(VIO_D7_MARK, PSD11_VIO, VIO_D7_SCIF1_SCK),
- PINMUX_DATA(VIO_D6_MARK, PSD11_VIO, VIO_D6_SCIF1_RXD),
- PINMUX_DATA(VIO_D5_MARK, PSD11_VIO, VIO_D5_SCIF1_TXD),
- PINMUX_DATA(VIO_D4_MARK, VIO_D4),
- PINMUX_DATA(VIO_D3_MARK, VIO_D3),
- PINMUX_DATA(VIO_D2_MARK, VIO_D2),
- PINMUX_DATA(VIO_D1_MARK, VIO_D1),
- PINMUX_DATA(VIO_D0_MARK, PSD10_VIO_D0, VIO_D0_LCDLCLK),
- PINMUX_DATA(VIO_CLK_MARK, PSD12_VIO, MSELB9_VIO, VIO_CLK_SCIF1_RTS),
- PINMUX_DATA(VIO_VD_MARK, PSD12_VIO, MSELB9_VIO, VIO_VD_SCIF1_CTS),
- PINMUX_DATA(VIO_HD_MARK, PSD13_VIO, MSELB9_VIO, VIO_HD_SCIF2_RXD),
- PINMUX_DATA(VIO_FLD_MARK, PSD13_VIO, HIZA9_VIO, VIO_FLD_SCIF2_CTS),
- PINMUX_DATA(VIO_CKO_MARK, PSD13_VIO, HIZA9_VIO, VIO_CKO_SCIF2_RTS),
- PINMUX_DATA(VIO_STEX_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEX_SCIF2_SCK),
- PINMUX_DATA(VIO_STEM_MARK, PSD13_VIO, HIZA9_VIO, VIO_STEM_SCIF2_TXD),
- PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FCE_VIO_HD2),
- PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
- HIZB1_VIO, FRB_VIO_CLK2),
-
- /* LCDC */
- PINMUX_DATA(LCDD23_MARK, HIZA8_LCDC, LCDD23),
- PINMUX_DATA(LCDD22_MARK, HIZA8_LCDC, LCDD22),
- PINMUX_DATA(LCDD21_MARK, HIZA8_LCDC, LCDD21),
- PINMUX_DATA(LCDD20_MARK, HIZA8_LCDC, LCDD20),
- PINMUX_DATA(LCDD19_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD19_DV_CLKI),
- PINMUX_DATA(LCDD18_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD18_DV_CLK),
- PINMUX_DATA(LCDD17_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD17_DV_HSYNC),
- PINMUX_DATA(LCDD16_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC,
- LCDD16_DV_VSYNC),
- PINMUX_DATA(LCDD15_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD15_DV_D15),
- PINMUX_DATA(LCDD14_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD14_DV_D14),
- PINMUX_DATA(LCDD13_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD13_DV_D13),
- PINMUX_DATA(LCDD12_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD12_DV_D12),
- PINMUX_DATA(LCDD11_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD11_DV_D11),
- PINMUX_DATA(LCDD10_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD10_DV_D10),
- PINMUX_DATA(LCDD9_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD9_DV_D9),
- PINMUX_DATA(LCDD8_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD8_DV_D8),
- PINMUX_DATA(LCDD7_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD7_DV_D7),
- PINMUX_DATA(LCDD6_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD6_DV_D6),
- PINMUX_DATA(LCDD5_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD5_DV_D5),
- PINMUX_DATA(LCDD4_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD4_DV_D4),
- PINMUX_DATA(LCDD3_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD3_DV_D3),
- PINMUX_DATA(LCDD2_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD2_DV_D2),
- PINMUX_DATA(LCDD1_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD1_DV_D1),
- PINMUX_DATA(LCDD0_MARK, PSD0_LCDD19_LCDD0, HIZA8_LCDC, LCDD0_DV_D0),
- PINMUX_DATA(LCDLCLK_MARK, PSD10_LCDLCLK, VIO_D0_LCDLCLK),
- /* Main LCD */
- PINMUX_DATA(LCDDON_MARK, PSD2_LCDDON, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC_MARK, PSD3_LCDVEPWC_LCDVCPWC,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN_MARK, HIZA7_LCDC, LCDVSYN),
- /* Main LCD - RGB Mode */
- PINMUX_DATA(LCDDCK_MARK, MSELB8_RGB, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDHSYN_MARK, MSELB8_RGB, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDDISP_MARK, MSELB8_RGB, HIZA7_LCDC, LCDDISP_LCDRS),
- /* Main LCD - SYS Mode */
- PINMUX_DATA(LCDRS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDDISP_LCDRS),
- PINMUX_DATA(LCDCS_MARK, MSELB8_SYS, HIZA7_LCDC, LCDHSYN_LCDCS),
- PINMUX_DATA(LCDWR_MARK, MSELB8_SYS, HIZA8_LCDC, LCDDCK_LCDWR),
- PINMUX_DATA(LCDRD_MARK, HIZA7_LCDC, LCDRD),
- /* Sub LCD - SYS Mode */
- PINMUX_DATA(LCDDON2_MARK, PSD2_LCDDON2, HIZA7_LCDC, LCDDON_LCDDON2),
- PINMUX_DATA(LCDVCPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVCPWC_LCDVCPWC2),
- PINMUX_DATA(LCDVEPWC2_MARK, PSD3_LCDVEPWC2_LCDVCPWC2,
- HIZA6_LCDC, LCDVEPWC_LCDVEPWC2),
- PINMUX_DATA(LCDVSYN2_MARK, PSE12_LCDVSYN2, HIZA8_LCDC, LCDVSYN2_DACK),
- PINMUX_DATA(LCDCS2_MARK, PSD5_LCDCS2, CS6B_CE1B_LCDCS2),
-
- /* BSC */
- PINMUX_DATA(IOIS16_MARK, IOIS16),
- PINMUX_DATA(A25_MARK, A25),
- PINMUX_DATA(A24_MARK, A24),
- PINMUX_DATA(A23_MARK, A23),
- PINMUX_DATA(A22_MARK, A22),
- PINMUX_DATA(BS_MARK, PSA9_BS, IRQ4_BS),
- PINMUX_DATA(CS6B_CE1B_MARK, PSD5_CS6B_CE1B, CS6B_CE1B_LCDCS2),
- PINMUX_DATA(WAIT_MARK, WAIT),
- PINMUX_DATA(CS6A_CE2B_MARK, CS6A_CE2B),
-
- /* SBSC */
- PINMUX_DATA(HPD63_MARK, HPD63),
- PINMUX_DATA(HPD62_MARK, HPD62),
- PINMUX_DATA(HPD61_MARK, HPD61),
- PINMUX_DATA(HPD60_MARK, HPD60),
- PINMUX_DATA(HPD59_MARK, HPD59),
- PINMUX_DATA(HPD58_MARK, HPD58),
- PINMUX_DATA(HPD57_MARK, HPD57),
- PINMUX_DATA(HPD56_MARK, HPD56),
- PINMUX_DATA(HPD55_MARK, HPD55),
- PINMUX_DATA(HPD54_MARK, HPD54),
- PINMUX_DATA(HPD53_MARK, HPD53),
- PINMUX_DATA(HPD52_MARK, HPD52),
- PINMUX_DATA(HPD51_MARK, HPD51),
- PINMUX_DATA(HPD50_MARK, HPD50),
- PINMUX_DATA(HPD49_MARK, HPD49),
- PINMUX_DATA(HPD48_MARK, HPD48),
- PINMUX_DATA(HPDQM7_MARK, HPDQM7),
- PINMUX_DATA(HPDQM6_MARK, HPDQM6),
- PINMUX_DATA(HPDQM5_MARK, HPDQM5),
- PINMUX_DATA(HPDQM4_MARK, HPDQM4),
-
- /* IRQ */
- PINMUX_DATA(IRQ0_MARK, HIZC8_IRQ0, IRQ0),
- PINMUX_DATA(IRQ1_MARK, HIZC9_IRQ1, IRQ1),
- PINMUX_DATA(IRQ2_MARK, PSA4_IRQ2, HIZC10_IRQ2, IRQ2_SDHID2),
- PINMUX_DATA(IRQ3_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_IRQ3,
- HIZC11_IRQ3, PTQ0),
- PINMUX_DATA(IRQ4_MARK, PSA9_IRQ4, HIZC12_IRQ4, IRQ4_BS),
- PINMUX_DATA(IRQ5_MARK, HIZC13_IRQ5, IRQ5),
- PINMUX_DATA(IRQ6_MARK, PSA15_IRQ6, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(IRQ7_MARK, PSA14_IRQ7, HIZC15_IRQ7, KEYIN4_IRQ7),
-
- /* SDHI */
- PINMUX_DATA(SDHICD_MARK, SDHICD),
- PINMUX_DATA(SDHIWP_MARK, SDHIWP),
- PINMUX_DATA(SDHID3_MARK, SDHID3),
- PINMUX_DATA(SDHID2_MARK, PSA4_SDHID2, IRQ2_SDHID2),
- PINMUX_DATA(SDHID1_MARK, SDHID1),
- PINMUX_DATA(SDHID0_MARK, SDHID0),
- PINMUX_DATA(SDHICMD_MARK, SDHICMD),
- PINMUX_DATA(SDHICLK_MARK, SDHICLK),
-
- /* SIU - Port A */
- PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, HIZB4_SIUA, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, HIZB4_SIUA, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, HIZB4_SIUA, SIUAISLD_SIOF1_RXD),
- PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, HIZB4_SIUA, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, HIZB4_SIUA, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, HIZB4_SIUA, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, HIZB4_SIUA, PSB1_SIUMCKA, PTK0),
- PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, HIZB4_SIUA, PTK0),
-
- /* SIU - Port B */
- PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
- PINMUX_DATA(SIUBOBT_MARK, PSB10_SIUBOBT, SIOSCK_SIUBOBT),
- PINMUX_DATA(SIUBISLD_MARK, PSB14_SIUBISLD, SIORXD_SIUBISLD),
- PINMUX_DATA(SIUBILR_MARK, PSB13_SIUBILR, SIOD_SIUBILR),
- PINMUX_DATA(SIUBIBT_MARK, PSB12_SIUBIBT, SIOSTRB0_SIUBIBT),
- PINMUX_DATA(SIUBOSLD_MARK, PSB15_SIUBOSLD, SIOTXD_SIUBOSLD),
- PINMUX_DATA(SIUMCKB_MARK, PSD9_SIOMCK_SIUMCKB, PSB9_SIUMCKB, PTF6),
- PINMUX_DATA(SIUFCKB_MARK, PSD9_SIUFCKB, PTF6),
-
- /* AUD */
- PINMUX_DATA(AUDSYNC_MARK, AUDSYNC),
- PINMUX_DATA(AUDATA3_MARK, AUDATA3),
- PINMUX_DATA(AUDATA2_MARK, AUDATA2),
- PINMUX_DATA(AUDATA1_MARK, AUDATA1),
- PINMUX_DATA(AUDATA0_MARK, AUDATA0),
-
- /* DMAC */
- PINMUX_DATA(DACK_MARK, PSE12_DACK, LCDVSYN2_DACK),
- PINMUX_DATA(DREQ0_MARK, DREQ0),
-
- /* VOU */
- PINMUX_DATA(DV_CLKI_MARK, PSD0_DV, LCDD19_DV_CLKI),
- PINMUX_DATA(DV_CLK_MARK, PSD0_DV, LCDD18_DV_CLK),
- PINMUX_DATA(DV_HSYNC_MARK, PSD0_DV, LCDD17_DV_HSYNC),
- PINMUX_DATA(DV_VSYNC_MARK, PSD0_DV, LCDD16_DV_VSYNC),
- PINMUX_DATA(DV_D15_MARK, PSD0_DV, LCDD15_DV_D15),
- PINMUX_DATA(DV_D14_MARK, PSD0_DV, LCDD14_DV_D14),
- PINMUX_DATA(DV_D13_MARK, PSD0_DV, LCDD13_DV_D13),
- PINMUX_DATA(DV_D12_MARK, PSD0_DV, LCDD12_DV_D12),
- PINMUX_DATA(DV_D11_MARK, PSD0_DV, LCDD11_DV_D11),
- PINMUX_DATA(DV_D10_MARK, PSD0_DV, LCDD10_DV_D10),
- PINMUX_DATA(DV_D9_MARK, PSD0_DV, LCDD9_DV_D9),
- PINMUX_DATA(DV_D8_MARK, PSD0_DV, LCDD8_DV_D8),
- PINMUX_DATA(DV_D7_MARK, PSD0_DV, LCDD7_DV_D7),
- PINMUX_DATA(DV_D6_MARK, PSD0_DV, LCDD6_DV_D6),
- PINMUX_DATA(DV_D5_MARK, PSD0_DV, LCDD5_DV_D5),
- PINMUX_DATA(DV_D4_MARK, PSD0_DV, LCDD4_DV_D4),
- PINMUX_DATA(DV_D3_MARK, PSD0_DV, LCDD3_DV_D3),
- PINMUX_DATA(DV_D2_MARK, PSD0_DV, LCDD2_DV_D2),
- PINMUX_DATA(DV_D1_MARK, PSD0_DV, LCDD1_DV_D1),
- PINMUX_DATA(DV_D0_MARK, PSD0_DV, LCDD0_DV_D0),
-
- /* CPG */
- PINMUX_DATA(STATUS0_MARK, STATUS0),
- PINMUX_DATA(PDSTATUS_MARK, PDSTATUS),
-
- /* SIOF0 */
- PINMUX_DATA(SIOF0_MCK_MARK, PSE15_SIOF0_MCK_IRQ3, PSB8_SIOF0_MCK, PTQ0),
- PINMUX_DATA(SIOF0_SCK_MARK, PSB5_SIOF0_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(SIOF0_SYNC_MARK, PSB4_SIOF0_SYNC, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(SIOF0_SS1_MARK, PSB3_SIOF0_SS1, SIOF0_SS1_TS_SPSYNC),
- PINMUX_DATA(SIOF0_SS2_MARK, PSB2_SIOF0_SS2, SIOF0_SS2_SIM_RST),
- PINMUX_DATA(SIOF0_TXD_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_SIOF0_TXD, PTQ1),
- PINMUX_DATA(SIOF0_RXD_MARK, PSE13_SIOF0_RXD_IRDA_IN,
- PSB6_SIOF0_RXD, PTQ2),
-
- /* SIOF1 */
- PINMUX_DATA(SIOF1_MCK_MARK, PSE11_SIUMCKA_SIOF1_MCK,
- PSB1_SIOF1_MCK, PTK0),
- PINMUX_DATA(SIOF1_SCK_MARK, PSC14_SIOF1_SCK, SIUAOBT_SIOF1_SCK),
- PINMUX_DATA(SIOF1_SYNC_MARK, PSC13_SIOF1_SYNC, SIUAOLR_SIOF1_SYNC),
- PINMUX_DATA(SIOF1_SS1_MARK, PSC12_SIOF1_SS1, SIUAIBT_SIOF1_SS1),
- PINMUX_DATA(SIOF1_SS2_MARK, PSC11_SIOF1_SS2, SIUAILR_SIOF1_SS2),
- PINMUX_DATA(SIOF1_TXD_MARK, PSB0_SIOF1_TXD, SIUAOSLD_SIOF1_TXD),
- PINMUX_DATA(SIOF1_RXD_MARK, PSC15_SIOF1_RXD, SIUAISLD_SIOF1_RXD),
-
- /* SIM */
- PINMUX_DATA(SIM_D_MARK, PSE15_SIM_D, PTQ0),
- PINMUX_DATA(SIM_CLK_MARK, PSE14_SIM_CLK, PTQ1),
- PINMUX_DATA(SIM_RST_MARK, PSB2_SIM_RST, SIOF0_SS2_SIM_RST),
-
- /* TSIF */
- PINMUX_DATA(TS_SDAT_MARK, PSE13_TS_SDAT, PTQ2),
- PINMUX_DATA(TS_SCK_MARK, PSB5_TS_SCK, SIOF0_SCK_TS_SCK),
- PINMUX_DATA(TS_SDEN_MARK, PSB4_TS_SDEN, SIOF0_SYNC_TS_SDEN),
- PINMUX_DATA(TS_SPSYNC_MARK, PSB3_TS_SPSYNC, SIOF0_SS1_TS_SPSYNC),
-
- /* IRDA */
- PINMUX_DATA(IRDA_IN_MARK, PSE13_SIOF0_RXD_IRDA_IN, PSB6_IRDA_IN, PTQ2),
- PINMUX_DATA(IRDA_OUT_MARK, PSE14_SIOF0_TXD_IRDA_OUT,
- PSB7_IRDA_OUT, PTQ1),
-
- /* TPU */
- PINMUX_DATA(TPUTO_MARK, PSD8_TPUTO, SCIF0_SCK_TPUTO),
-
- /* FLCTL */
- PINMUX_DATA(FCE_MARK, PSE3_FLCTL, FCE_VIO_HD2),
- PINMUX_DATA(NAF7_MARK, PSC0_NAF, HIZA10_NAF, NAF7_VIO_D15),
- PINMUX_DATA(NAF6_MARK, PSC0_NAF, HIZA10_NAF, NAF6_VIO_D14),
- PINMUX_DATA(NAF5_MARK, PSC0_NAF, HIZA10_NAF, NAF5_VIO_D13),
- PINMUX_DATA(NAF4_MARK, PSC0_NAF, HIZA10_NAF, NAF4_VIO_D12),
- PINMUX_DATA(NAF3_MARK, PSC0_NAF, HIZA10_NAF, NAF3_VIO_D11),
- PINMUX_DATA(NAF2_MARK, PSE2_NAF2, HIZB0_VIO, NAF2_VIO_D10),
- PINMUX_DATA(NAF1_MARK, PSE1_NAF1, HIZB0_VIO, NAF1_VIO_D9),
- PINMUX_DATA(NAF0_MARK, PSE0_NAF0, HIZB0_VIO, NAF0_VIO_D8),
- PINMUX_DATA(FCDE_MARK, FCDE),
- PINMUX_DATA(FOE_MARK, PSE3_FLCTL, HIZB0_VIO, FOE_VIO_VD2),
- PINMUX_DATA(FSC_MARK, FSC),
- PINMUX_DATA(FWE_MARK, FWE),
- PINMUX_DATA(FRB_MARK, PSE3_FLCTL, FRB_VIO_CLK2),
-
- /* KEYSC */
- PINMUX_DATA(KEYIN0_MARK, PSA15_KEYIN0, HIZC14_IRQ6, KEYIN0_IRQ6),
- PINMUX_DATA(KEYIN1_MARK, HIZA14_KEYSC, KEYIN1),
- PINMUX_DATA(KEYIN2_MARK, HIZA14_KEYSC, KEYIN2),
- PINMUX_DATA(KEYIN3_MARK, HIZA14_KEYSC, KEYIN3),
- PINMUX_DATA(KEYIN4_MARK, PSA14_KEYIN4, HIZC15_IRQ7, KEYIN4_IRQ7),
- PINMUX_DATA(KEYOUT0_MARK, HIZA14_KEYSC, KEYOUT0),
- PINMUX_DATA(KEYOUT1_MARK, HIZA14_KEYSC, KEYOUT1),
- PINMUX_DATA(KEYOUT2_MARK, HIZA14_KEYSC, KEYOUT2),
- PINMUX_DATA(KEYOUT3_MARK, HIZA14_KEYSC, KEYOUT3),
- PINMUX_DATA(KEYOUT4_IN6_MARK, HIZA14_KEYSC, KEYOUT4_IN6),
- PINMUX_DATA(KEYOUT5_IN5_MARK, HIZA14_KEYSC, KEYOUT5_IN5),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_RTS),
- GPIO_FN(SCIF1_CTS),
- GPIO_FN(SCIF1_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SCIF2_RTS),
- GPIO_FN(SCIF2_CTS),
- GPIO_FN(SCIF2_SCK),
-
- /* SIO */
- GPIO_FN(SIOTXD),
- GPIO_FN(SIORXD),
- GPIO_FN(SIOD),
- GPIO_FN(SIOSTRB0),
- GPIO_FN(SIOSTRB1),
- GPIO_FN(SIOSCK),
- GPIO_FN(SIOMCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK),
- GPIO_FN(VIO_VD),
- GPIO_FN(VIO_HD),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_STEX),
- GPIO_FN(VIO_STEM),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
- /* Sub LCD - SYS Mode */
- GPIO_FN(LCDDON2),
- GPIO_FN(LCDVCPWC2),
- GPIO_FN(LCDVEPWC2),
- GPIO_FN(LCDVSYN2),
- GPIO_FN(LCDCS2),
-
- /* BSC */
- GPIO_FN(IOIS16),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(BS),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(WAIT),
- GPIO_FN(CS6A_CE2B),
-
- /* SBSC */
- GPIO_FN(HPD63),
- GPIO_FN(HPD62),
- GPIO_FN(HPD61),
- GPIO_FN(HPD60),
- GPIO_FN(HPD59),
- GPIO_FN(HPD58),
- GPIO_FN(HPD57),
- GPIO_FN(HPD56),
- GPIO_FN(HPD55),
- GPIO_FN(HPD54),
- GPIO_FN(HPD53),
- GPIO_FN(HPD52),
- GPIO_FN(HPD51),
- GPIO_FN(HPD50),
- GPIO_FN(HPD49),
- GPIO_FN(HPD48),
- GPIO_FN(HPDQM7),
- GPIO_FN(HPDQM6),
- GPIO_FN(HPDQM5),
- GPIO_FN(HPDQM4),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* SDHI */
- GPIO_FN(SDHICD),
- GPIO_FN(SDHIWP),
- GPIO_FN(SDHID3),
- GPIO_FN(SDHID2),
- GPIO_FN(SDHID1),
- GPIO_FN(SDHID0),
- GPIO_FN(SDHICMD),
- GPIO_FN(SDHICLK),
-
- /* SIU - Port A */
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUMCKA),
- GPIO_FN(SIUFCKA),
-
- /* SIU - Port B */
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUMCKB),
- GPIO_FN(SIUFCKB),
-
- /* AUD */
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* DMAC */
- GPIO_FN(DACK),
- GPIO_FN(DREQ0),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* SIOF0 */
- GPIO_FN(SIOF0_MCK),
- GPIO_FN(SIOF0_SCK),
- GPIO_FN(SIOF0_SYNC),
- GPIO_FN(SIOF0_SS1),
- GPIO_FN(SIOF0_SS2),
- GPIO_FN(SIOF0_TXD),
- GPIO_FN(SIOF0_RXD),
-
- /* SIOF1 */
- GPIO_FN(SIOF1_MCK),
- GPIO_FN(SIOF1_SCK),
- GPIO_FN(SIOF1_SYNC),
- GPIO_FN(SIOF1_SS1),
- GPIO_FN(SIOF1_SS2),
- GPIO_FN(SIOF1_TXD),
- GPIO_FN(SIOF1_RXD),
-
- /* SIM */
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* TSIF */
- GPIO_FN(TS_SDAT),
- GPIO_FN(TS_SCK),
- GPIO_FN(TS_SDEN),
- GPIO_FN(TS_SPSYNC),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* TPU */
- GPIO_FN(TPUTO),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- VIO_D7_SCIF1_SCK, PTA7_OUT, 0, PTA7_IN,
- VIO_D6_SCIF1_RXD, 0, 0, PTA6_IN,
- VIO_D5_SCIF1_TXD, PTA5_OUT, 0, PTA5_IN,
- VIO_D4, 0, 0, PTA4_IN,
- VIO_D3, 0, 0, PTA3_IN,
- VIO_D2, 0, 0, PTA2_IN,
- VIO_D1, 0, 0, PTA1_IN,
- VIO_D0_LCDLCLK, 0, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- HPD55, PTB7_OUT, 0, PTB7_IN,
- HPD54, PTB6_OUT, 0, PTB6_IN,
- HPD53, PTB5_OUT, 0, PTB5_IN,
- HPD52, PTB4_OUT, 0, PTB4_IN,
- HPD51, PTB3_OUT, 0, PTB3_IN,
- HPD50, PTB2_OUT, 0, PTB2_IN,
- HPD49, PTB1_OUT, 0, PTB1_IN,
- HPD48, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PCCR", 0xa4050104, 16,
- GROUP(2, -2, 2, 2, 2, 2, -2, 2),
- GROUP(
- 0, 0, 0, PTC7_IN,
- /* RESERVED [2] */
- IOIS16, 0, 0, PTC5_IN,
- HPDQM7, PTC4_OUT, 0, PTC4_IN,
- HPDQM6, PTC3_OUT, 0, PTC3_IN,
- HPDQM5, PTC2_OUT, 0, PTC2_IN,
- /* RESERVED [2] */
- HPDQM4, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- SDHICD, 0, 0, PTD7_IN,
- SDHIWP, PTD6_OUT, 0, PTD6_IN,
- SDHID3, PTD5_OUT, 0, PTD5_IN,
- IRQ2_SDHID2, PTD4_OUT, 0, PTD4_IN,
- SDHID1, PTD3_OUT, 0, PTD3_IN,
- SDHID0, PTD2_OUT, 0, PTD2_IN,
- SDHICMD, PTD1_OUT, 0, PTD1_IN,
- SDHICLK, PTD0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(2, 2, 2, 2, -4, 2, 2),
- GROUP(
- A25, PTE7_OUT, 0, PTE7_IN,
- A24, PTE6_OUT, 0, PTE6_IN,
- A23, PTE5_OUT, 0, PTE5_IN,
- A22, PTE4_OUT, 0, PTE4_IN,
- /* RESERVED [4] */
- IRQ5, PTE1_OUT, 0, PTE1_IN,
- IRQ4_BS, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTF6, PTF6_OUT, 0, PTF6_IN,
- SIOSCK_SIUBOBT, PTF5_OUT, 0, PTF5_IN,
- SIOSTRB1_SIUBOLR, PTF4_OUT, 0, PTF4_IN,
- SIOSTRB0_SIUBIBT, PTF3_OUT, 0, PTF3_IN,
- SIOD_SIUBILR, PTF2_OUT, 0, PTF2_IN,
- SIORXD_SIUBISLD, 0, 0, PTF1_IN,
- SIOTXD_SIUBOSLD, PTF0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- AUDSYNC, PTG4_OUT, 0, 0,
- AUDATA3, PTG3_OUT, 0, 0,
- AUDATA2, PTG2_OUT, 0, 0,
- AUDATA1, PTG1_OUT, 0, 0,
- AUDATA0, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- LCDVCPWC_LCDVCPWC2, PTH7_OUT, 0, 0,
- LCDVSYN2_DACK, PTH6_OUT, 0, PTH6_IN,
- LCDVSYN, PTH5_OUT, 0, PTH5_IN,
- LCDDISP_LCDRS, PTH4_OUT, 0, 0,
- LCDHSYN_LCDCS, PTH3_OUT, 0, 0,
- LCDDON_LCDDON2, PTH2_OUT, 0, 0,
- LCDD17_DV_HSYNC, PTH1_OUT, 0, PTH1_IN,
- LCDD16_DV_VSYNC, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, 2, 2, -6, 2, 2),
- GROUP(
- STATUS0, PTJ7_OUT, 0, 0,
- 0, PTJ6_OUT, 0, 0,
- PDSTATUS, PTJ5_OUT, 0, 0,
- /* RESERVED [6] */
- IRQ1, PTJ1_OUT, 0, PTJ1_IN,
- IRQ0, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIUAILR_SIOF1_SS2, PTK6_OUT, 0, PTK6_IN,
- SIUAIBT_SIOF1_SS1, PTK5_OUT, 0, PTK5_IN,
- SIUAOLR_SIOF1_SYNC, PTK4_OUT, 0, PTK4_IN,
- SIUAOBT_SIOF1_SCK, PTK3_OUT, 0, PTK3_IN,
- SIUAISLD_SIOF1_RXD, 0, 0, PTK2_IN,
- SIUAOSLD_SIOF1_TXD, PTK1_OUT, 0, 0,
- PTK0, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- LCDD15_DV_D15, PTL7_OUT, 0, PTL7_IN,
- LCDD14_DV_D14, PTL6_OUT, 0, PTL6_IN,
- LCDD13_DV_D13, PTL5_OUT, 0, PTL5_IN,
- LCDD12_DV_D12, PTL4_OUT, 0, PTL4_IN,
- LCDD11_DV_D11, PTL3_OUT, 0, PTL3_IN,
- LCDD10_DV_D10, PTL2_OUT, 0, PTL2_IN,
- LCDD9_DV_D9, PTL1_OUT, 0, PTL1_IN,
- LCDD8_DV_D8, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- LCDD7_DV_D7, PTM7_OUT, 0, PTM7_IN,
- LCDD6_DV_D6, PTM6_OUT, 0, PTM6_IN,
- LCDD5_DV_D5, PTM5_OUT, 0, PTM5_IN,
- LCDD4_DV_D4, PTM4_OUT, 0, PTM4_IN,
- LCDD3_DV_D3, PTM3_OUT, 0, PTM3_IN,
- LCDD2_DV_D2, PTM2_OUT, 0, PTM2_IN,
- LCDD1_DV_D1, PTM1_OUT, 0, PTM1_IN,
- LCDD0_DV_D0, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- HPD63, PTN7_OUT, 0, PTN7_IN,
- HPD62, PTN6_OUT, 0, PTN6_IN,
- HPD61, PTN5_OUT, 0, PTN5_IN,
- HPD60, PTN4_OUT, 0, PTN4_IN,
- HPD59, PTN3_OUT, 0, PTN3_IN,
- HPD58, PTN2_OUT, 0, PTN2_IN,
- HPD57, PTN1_OUT, 0, PTN1_IN,
- HPD56, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- 0, 0, 0, 0,
- SIOF0_SS2_SIM_RST, PTQ6_OUT, 0, 0,
- SIOF0_SS1_TS_SPSYNC, PTQ5_OUT, 0, PTQ5_IN,
- SIOF0_SYNC_TS_SDEN, PTQ4_OUT, 0, PTQ4_IN,
- SIOF0_SCK_TS_SCK, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2, 0, 0, PTQ2_IN,
- PTQ1, PTQ1_OUT, 0, 0,
- PTQ0, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xa405011c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- LCDRD, PTR4_OUT, 0, 0,
- CS6B_CE1B_LCDCS2, PTR3_OUT, 0, 0,
- WAIT, 0, 0, PTR2_IN,
- LCDDCK_LCDWR, PTR1_OUT, 0, 0,
- LCDVEPWC_LCDVEPWC2, PTR0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PSCR", 0xa405011e, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- SCIF0_CTS_SIUAISPD, 0, 0, PTS4_IN,
- SCIF0_RTS_SIUAOSPD, PTS3_OUT, 0, 0,
- SCIF0_SCK_TPUTO, PTS2_OUT, 0, PTS2_IN,
- SCIF0_RXD, 0, 0, PTS1_IN,
- SCIF0_TXD, PTS0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- FOE_VIO_VD2, PTT4_OUT, 0, PTT4_IN,
- FWE, PTT3_OUT, 0, PTT3_IN,
- FSC, PTT2_OUT, 0, PTT2_IN,
- DREQ0, 0, 0, PTT1_IN,
- FCDE, PTT0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF2_VIO_D10, PTU4_OUT, 0, PTU4_IN,
- NAF1_VIO_D9, PTU3_OUT, 0, PTU3_IN,
- NAF0_VIO_D8, PTU2_OUT, 0, PTU2_IN,
- FRB_VIO_CLK2, 0, 0, PTU1_IN,
- FCE_VIO_HD2, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PVCR", 0xa4050144, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- NAF7_VIO_D15, PTV4_OUT, 0, PTV4_IN,
- NAF6_VIO_D14, PTV3_OUT, 0, PTV3_IN,
- NAF5_VIO_D13, PTV2_OUT, 0, PTV2_IN,
- NAF4_VIO_D12, PTV1_OUT, 0, PTV1_IN,
- NAF3_VIO_D11, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- 0, 0, 0, 0,
- VIO_FLD_SCIF2_CTS, 0, 0, PTW6_IN,
- VIO_CKO_SCIF2_RTS, PTW5_OUT, 0, 0,
- VIO_STEX_SCIF2_SCK, PTW4_OUT, 0, PTW4_IN,
- VIO_STEM_SCIF2_TXD, PTW3_OUT, 0, PTW3_IN,
- VIO_HD_SCIF2_RXD, PTW2_OUT, 0, PTW2_IN,
- VIO_VD_SCIF1_CTS, PTW1_OUT, 0, PTW1_IN,
- VIO_CLK_SCIF1_RTS, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- 0, 0, 0, 0,
- CS6A_CE2B, PTX6_OUT, 0, PTX6_IN,
- LCDD23, PTX5_OUT, 0, PTX5_IN,
- LCDD22, PTX4_OUT, 0, PTX4_IN,
- LCDD21, PTX3_OUT, 0, PTX3_IN,
- LCDD20, PTX2_OUT, 0, PTX2_IN,
- LCDD19_DV_CLKI, PTX1_OUT, 0, PTX1_IN,
- LCDD18_DV_CLK, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PYCR", 0xa405014a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- KEYOUT5_IN5, PTY5_OUT, 0, PTY5_IN,
- KEYOUT4_IN6, PTY4_OUT, 0, PTY4_IN,
- KEYOUT3, PTY3_OUT, 0, PTY3_IN,
- KEYOUT2, PTY2_OUT, 0, PTY2_IN,
- KEYOUT1, PTY1_OUT, 0, 0,
- KEYOUT0, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PZCR", 0xa405014c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, -2),
- GROUP(
- /* RESERVED [4] */
- KEYIN4_IRQ7, 0, 0, PTZ5_IN,
- KEYIN3, 0, 0, PTZ4_IN,
- KEYIN2, 0, 0, PTZ3_IN,
- KEYIN1, 0, 0, PTZ2_IN,
- KEYIN0_IRQ6, 0, 0, PTZ1_IN,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(1, 1, -4, 1, -4, 1, -4),
- GROUP(
- PSA15_KEYIN0, PSA15_IRQ6,
- PSA14_KEYIN4, PSA14_IRQ7,
- /* RESERVED [4] */
- PSA9_IRQ4, PSA9_BS,
- /* RESERVED [4] */
- PSA4_IRQ2, PSA4_SDHID2,
- /* RESERVED [4] */ ))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- PSB15_SIOTXD, PSB15_SIUBOSLD,
- PSB14_SIORXD, PSB14_SIUBISLD,
- PSB13_SIOD, PSB13_SIUBILR,
- PSB12_SIOSTRB0, PSB12_SIUBIBT,
- PSB11_SIOSTRB1, PSB11_SIUBOLR,
- PSB10_SIOSCK, PSB10_SIUBOBT,
- PSB9_SIOMCK, PSB9_SIUMCKB,
- PSB8_SIOF0_MCK, PSB8_IRQ3,
- PSB7_SIOF0_TXD, PSB7_IRDA_OUT,
- PSB6_SIOF0_RXD, PSB6_IRDA_IN,
- PSB5_SIOF0_SCK, PSB5_TS_SCK,
- PSB4_SIOF0_SYNC, PSB4_TS_SDEN,
- PSB3_SIOF0_SS1, PSB3_TS_SPSYNC,
- PSB2_SIOF0_SS2, PSB2_SIM_RST,
- PSB1_SIUMCKA, PSB1_SIOF1_MCK,
- PSB0_SIUAOSLD, PSB0_SIOF1_TXD ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(1, 1, 1, 1, 1, -10, 1),
- GROUP(
- PSC15_SIUAISLD, PSC15_SIOF1_RXD,
- PSC14_SIUAOBT, PSC14_SIOF1_SCK,
- PSC13_SIUAOLR, PSC13_SIOF1_SYNC,
- PSC12_SIUAIBT, PSC12_SIOF1_SS1,
- PSC11_SIUAILR, PSC11_SIOF1_SS2,
- /* RESERVED [10] */
- PSC0_NAF, PSC0_VIO ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- 0, 0,
- 0, 0,
- PSD13_VIO, PSD13_SCIF2,
- PSD12_VIO, PSD12_SCIF1,
- PSD11_VIO, PSD11_SCIF1,
- PSD10_VIO_D0, PSD10_LCDLCLK,
- PSD9_SIOMCK_SIUMCKB, PSD9_SIUFCKB,
- PSD8_SCIF0_SCK, PSD8_TPUTO,
- PSD7_SCIF0_RTS, PSD7_SIUAOSPD,
- PSD6_SCIF0_CTS, PSD6_SIUAISPD,
- PSD5_CS6B_CE1B, PSD5_LCDCS2,
- 0, 0,
- PSD3_LCDVEPWC_LCDVCPWC, PSD3_LCDVEPWC2_LCDVCPWC2,
- PSD2_LCDDON, PSD2_LCDDON2,
- 0, 0,
- PSD0_LCDD19_LCDD0, PSD0_DV ))
- },
- { PINMUX_CFG_REG_VAR("PSELE", 0xa4050156, 16,
- GROUP(1, 1, 1, 1, 1, -7, 1, 1, 1, 1),
- GROUP(
- PSE15_SIOF0_MCK_IRQ3, PSE15_SIM_D,
- PSE14_SIOF0_TXD_IRDA_OUT, PSE14_SIM_CLK,
- PSE13_SIOF0_RXD_IRDA_IN, PSE13_TS_SDAT,
- PSE12_LCDVSYN2, PSE12_DACK,
- PSE11_SIUMCKA_SIOF1_MCK, PSE11_SIUFCKA,
- /* RESERVED [7] */
- PSE3_FLCTL, PSE3_VIO,
- PSE2_NAF2, PSE2_VIO_D10,
- PSE1_NAF1, PSE1_VIO_D9,
- PSE0_NAF0, PSE0_VIO_D8 ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRA", 0xa4050158, 16,
- GROUP(-1, 1, -3, 1, 1, 1, 1, 1, -6),
- GROUP(
- /* RESERVED [1] */
- HIZA14_KEYSC, HIZA14_HIZ,
- /* RESERVED [3] */
- HIZA10_NAF, HIZA10_HIZ,
- HIZA9_VIO, HIZA9_HIZ,
- HIZA8_LCDC, HIZA8_HIZ,
- HIZA7_LCDC, HIZA7_HIZ,
- HIZA6_LCDC, HIZA6_HIZ,
- /* RESERVED [6] */ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRB", 0xa405015a, 16,
- GROUP(-11, 1, -2, 1, 1),
- GROUP(
- /* RESERVED [11] */
- HIZB4_SIUA, HIZB4_HIZ,
- /* RESERVED [2] */
- HIZB1_VIO, HIZB1_HIZ,
- HIZB0_VIO, HIZB0_HIZ ))
- },
- { PINMUX_CFG_REG_VAR("HIZCRC", 0xa405015c, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- HIZC15_IRQ7, HIZC15_HIZ,
- HIZC14_IRQ6, HIZC14_HIZ,
- HIZC13_IRQ5, HIZC13_HIZ,
- HIZC12_IRQ4, HIZC12_HIZ,
- HIZC11_IRQ3, HIZC11_HIZ,
- HIZC10_IRQ2, HIZC10_HIZ,
- HIZC9_IRQ1, HIZC9_HIZ,
- HIZC8_IRQ0, HIZC8_HIZ,
- /* RESERVED [8] */ ))
- },
- { PINMUX_CFG_REG_VAR("MSELCRB", 0xa4050182, 16,
- GROUP(-6, 1, 1, -8),
- GROUP(
- /* RESERVED [6] */
- MSELB9_VIO, MSELB9_VIO2,
- MSELB8_RGB, MSELB8_SYS,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, 0, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, 0, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- 0, 0, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- 0, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, 0, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- 0, 0, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- 0, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- 0, 0, 0, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, 0, 0, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, 0, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, 0, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- 0, 0, 0, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- 0, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- 0, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- 0, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- 0, 0, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7722_pinmux_info = {
- .name = "sh7722_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7723.c b/drivers/pinctrl/renesas/pfc-sh7723.c
deleted file mode 100644
index 95344281966e6e..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7723.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7723 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7723.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE5_DATA, PTE4_DATA, PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA, PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ5_DATA, PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT5_DATA, PTT4_DATA, PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU5_DATA, PTU4_DATA, PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE5_IN, PTE4_IN, PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT5_IN, PTT4_IN, PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU5_IN, PTU4_IN, PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE5_OUT, PTE4_OUT, PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT, PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ5_OUT, PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT5_OUT, PTT4_OUT, PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU5_OUT, PTU4_OUT, PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE5_FN, PTE4_FN, PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN, PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ5_FN, PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT5_FN, PTT4_FN, PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU5_FN, PTU4_FN, PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_PSA14_FN1, PSA15_PSA14_FN2,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2,
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2,
- PSB15_PSB14_FN1, PSB15_PSB14_FN2,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS,
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2,
- PSC15_PSC14_FN1, PSC15_PSC14_FN2,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3,
- PSD15_PSD14_FN1, PSD15_PSD14_FN2,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- SCIF0_PTT_TXD_MARK, SCIF0_PTT_RXD_MARK,
- SCIF0_PTT_SCK_MARK, SCIF0_PTU_TXD_MARK,
- SCIF0_PTU_RXD_MARK, SCIF0_PTU_SCK_MARK,
-
- SCIF1_PTS_TXD_MARK, SCIF1_PTS_RXD_MARK,
- SCIF1_PTS_SCK_MARK, SCIF1_PTV_TXD_MARK,
- SCIF1_PTV_RXD_MARK, SCIF1_PTV_SCK_MARK,
-
- SCIF2_PTT_TXD_MARK, SCIF2_PTT_RXD_MARK,
- SCIF2_PTT_SCK_MARK, SCIF2_PTU_TXD_MARK,
- SCIF2_PTU_RXD_MARK, SCIF2_PTU_SCK_MARK,
-
- SCIF3_PTS_TXD_MARK, SCIF3_PTS_RXD_MARK,
- SCIF3_PTS_SCK_MARK, SCIF3_PTS_RTS_MARK,
- SCIF3_PTS_CTS_MARK, SCIF3_PTV_TXD_MARK,
- SCIF3_PTV_RXD_MARK, SCIF3_PTV_SCK_MARK,
- SCIF3_PTV_RTS_MARK, SCIF3_PTV_CTS_MARK,
-
- SCIF4_PTE_TXD_MARK, SCIF4_PTE_RXD_MARK,
- SCIF4_PTE_SCK_MARK, SCIF4_PTN_TXD_MARK,
- SCIF4_PTN_RXD_MARK, SCIF4_PTN_SCK_MARK,
-
- SCIF5_PTE_TXD_MARK, SCIF5_PTE_RXD_MARK,
- SCIF5_PTE_SCK_MARK, SCIF5_PTN_TXD_MARK,
- SCIF5_PTN_RXD_MARK, SCIF5_PTN_SCK_MARK,
-
- VIO_D15_MARK, VIO_D14_MARK, VIO_D13_MARK, VIO_D12_MARK,
- VIO_D11_MARK, VIO_D10_MARK, VIO_D9_MARK, VIO_D8_MARK,
- VIO_D7_MARK, VIO_D6_MARK, VIO_D5_MARK, VIO_D4_MARK,
- VIO_D3_MARK, VIO_D2_MARK, VIO_D1_MARK, VIO_D0_MARK,
- VIO_FLD_MARK, VIO_CKO_MARK,
- VIO_VD1_MARK, VIO_HD1_MARK, VIO_CLK1_MARK,
- VIO_HD2_MARK, VIO_VD2_MARK, VIO_CLK2_MARK,
-
- LCDD23_MARK, LCDD22_MARK, LCDD21_MARK, LCDD20_MARK,
- LCDD19_MARK, LCDD18_MARK, LCDD17_MARK, LCDD16_MARK,
- LCDD15_MARK, LCDD14_MARK, LCDD13_MARK, LCDD12_MARK,
- LCDD11_MARK, LCDD10_MARK, LCDD9_MARK, LCDD8_MARK,
- LCDD7_MARK, LCDD6_MARK, LCDD5_MARK, LCDD4_MARK,
- LCDD3_MARK, LCDD2_MARK, LCDD1_MARK, LCDD0_MARK,
- LCDDON_MARK, LCDVCPWC_MARK, LCDVEPWC_MARK,
- LCDVSYN_MARK, LCDDCK_MARK, LCDHSYN_MARK, LCDDISP_MARK,
- LCDRS_MARK, LCDCS_MARK, LCDWR_MARK, LCDRD_MARK,
- LCDLCLK_PTR_MARK, LCDLCLK_PTW_MARK,
-
- IRQ0_MARK, IRQ1_MARK, IRQ2_MARK, IRQ3_MARK,
- IRQ4_MARK, IRQ5_MARK, IRQ6_MARK, IRQ7_MARK,
-
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- AUDCK_MARK, AUDSYNC_MARK,
-
- SDHI0CD_PTD_MARK, SDHI0WP_PTD_MARK,
- SDHI0D3_PTD_MARK, SDHI0D2_PTD_MARK,
- SDHI0D1_PTD_MARK, SDHI0D0_PTD_MARK,
- SDHI0CMD_PTD_MARK, SDHI0CLK_PTD_MARK,
-
- SDHI0CD_PTS_MARK, SDHI0WP_PTS_MARK,
- SDHI0D3_PTS_MARK, SDHI0D2_PTS_MARK,
- SDHI0D1_PTS_MARK, SDHI0D0_PTS_MARK,
- SDHI0CMD_PTS_MARK, SDHI0CLK_PTS_MARK,
-
- SDHI1CD_MARK, SDHI1WP_MARK, SDHI1D3_MARK, SDHI1D2_MARK,
- SDHI1D1_MARK, SDHI1D0_MARK, SDHI1CMD_MARK, SDHI1CLK_MARK,
-
- SIUAFCK_MARK, SIUAILR_MARK, SIUAIBT_MARK, SIUAISLD_MARK,
- SIUAOLR_MARK, SIUAOBT_MARK, SIUAOSLD_MARK, SIUAMCK_MARK,
- SIUAISPD_MARK, SIUAOSPD_MARK,
-
- SIUBFCK_MARK, SIUBILR_MARK, SIUBIBT_MARK, SIUBISLD_MARK,
- SIUBOLR_MARK, SIUBOBT_MARK, SIUBOSLD_MARK, SIUBMCK_MARK,
-
- IRDA_IN_MARK, IRDA_OUT_MARK,
-
- DV_CLKI_MARK, DV_CLK_MARK, DV_HSYNC_MARK, DV_VSYNC_MARK,
- DV_D15_MARK, DV_D14_MARK, DV_D13_MARK, DV_D12_MARK,
- DV_D11_MARK, DV_D10_MARK, DV_D9_MARK, DV_D8_MARK,
- DV_D7_MARK, DV_D6_MARK, DV_D5_MARK, DV_D4_MARK,
- DV_D3_MARK, DV_D2_MARK, DV_D1_MARK, DV_D0_MARK,
-
- KEYIN0_MARK, KEYIN1_MARK, KEYIN2_MARK, KEYIN3_MARK, KEYIN4_MARK,
- KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
- KEYOUT4_IN6_MARK, KEYOUT5_IN5_MARK,
-
- MSIOF0_PTF_TXD_MARK, MSIOF0_PTF_RXD_MARK, MSIOF0_PTF_MCK_MARK,
- MSIOF0_PTF_TSYNC_MARK, MSIOF0_PTF_TSCK_MARK, MSIOF0_PTF_RSYNC_MARK,
- MSIOF0_PTF_RSCK_MARK, MSIOF0_PTF_SS1_MARK, MSIOF0_PTF_SS2_MARK,
-
- MSIOF0_PTT_TXD_MARK, MSIOF0_PTT_RXD_MARK, MSIOF0_PTX_MCK_MARK,
- MSIOF0_PTT_TSYNC_MARK, MSIOF0_PTT_TSCK_MARK, MSIOF0_PTT_RSYNC_MARK,
- MSIOF0_PTT_RSCK_MARK, MSIOF0_PTT_SS1_MARK, MSIOF0_PTT_SS2_MARK,
-
- MSIOF1_TXD_MARK, MSIOF1_RXD_MARK, MSIOF1_MCK_MARK,
- MSIOF1_TSYNC_MARK, MSIOF1_TSCK_MARK, MSIOF1_RSYNC_MARK,
- MSIOF1_RSCK_MARK, MSIOF1_SS1_MARK, MSIOF1_SS2_MARK,
-
- TS0_SDAT_MARK, TS0_SCK_MARK, TS0_SDEN_MARK, TS0_SPSYNC_MARK,
-
- FCE_MARK, NAF7_MARK, NAF6_MARK, NAF5_MARK, NAF4_MARK,
- NAF3_MARK, NAF2_MARK, NAF1_MARK, NAF0_MARK, FCDE_MARK,
- FOE_MARK, FSC_MARK, FWE_MARK, FRB_MARK,
-
- DACK1_MARK, DREQ1_MARK, DACK0_MARK, DREQ0_MARK,
-
- AN3_MARK, AN2_MARK, AN1_MARK, AN0_MARK, ADTRG_MARK,
-
- STATUS0_MARK, PDSTATUS_MARK,
-
- TPUTO3_MARK, TPUTO2_MARK, TPUTO1_MARK, TPUTO0_MARK,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK,
- D27_MARK, D26_MARK, D25_MARK, D24_MARK,
- D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
- IOIS16_MARK, WAIT_MARK, BS_MARK,
- A25_MARK, A24_MARK, A23_MARK, A22_MARK,
- CS6B_CE1B_MARK, CS6A_CE2B_MARK,
- CS5B_CE1A_MARK, CS5A_CE2A_MARK,
- WE3_ICIOWR_MARK, WE2_ICIORD_MARK,
-
- IDED15_MARK, IDED14_MARK, IDED13_MARK, IDED12_MARK,
- IDED11_MARK, IDED10_MARK, IDED9_MARK, IDED8_MARK,
- IDED7_MARK, IDED6_MARK, IDED5_MARK, IDED4_MARK,
- IDED3_MARK, IDED2_MARK, IDED1_MARK, IDED0_MARK,
- DIRECTION_MARK, EXBUF_ENB_MARK, IDERST_MARK, IODACK_MARK,
- IODREQ_MARK, IDEIORDY_MARK, IDEINT_MARK, IDEIOWR_MARK,
- IDEIORD_MARK, IDECS1_MARK, IDECS0_MARK, IDEA2_MARK,
- IDEA1_MARK, IDEA0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_PSA14_FN1, PTA7_FN),
- PINMUX_DATA(KEYOUT2_MARK, PSA15_PSA14_FN2, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_PSA14_FN1, PTA6_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_PSA14_FN2, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_PSA14_FN1, PTA5_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_PSA14_FN2, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_PSA14_FN1, PTA4_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_PSA14_FN2, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_PSA14_FN1, PTA3_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_PSA14_FN2, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_PSA14_FN1, PTA2_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_PSA14_FN2, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_PSA14_FN1, PTA1_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_PSA14_FN2, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_PSA14_FN1, PTA0_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_PSA14_FN2, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PTB7_FN),
- PINMUX_DATA(D30_MARK, PTB6_FN),
- PINMUX_DATA(D29_MARK, PTB5_FN),
- PINMUX_DATA(D28_MARK, PTB4_FN),
- PINMUX_DATA(D27_MARK, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_PSA14_FN1, PTB2_FN),
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_PSA14_FN2, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_PSA14_FN1, PTB1_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_PSA14_FN2, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_PSA14_FN1, PTB0_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_PSA14_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IDED15_MARK, PSA11_PSA10_FN1, PTC7_FN),
- PINMUX_DATA(SDHI1CD_MARK, PSA11_PSA10_FN2, PTC7_FN),
- PINMUX_DATA(IDED14_MARK, PSA11_PSA10_FN1, PTC6_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSA11_PSA10_FN2, PTC6_FN),
- PINMUX_DATA(IDED13_MARK, PSA11_PSA10_FN1, PTC5_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSA11_PSA10_FN2, PTC5_FN),
- PINMUX_DATA(IDED12_MARK, PSA11_PSA10_FN1, PTC4_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSA11_PSA10_FN2, PTC4_FN),
- PINMUX_DATA(IDED11_MARK, PSA11_PSA10_FN1, PTC3_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA11_PSA10_FN2, PTC3_FN),
- PINMUX_DATA(IDED10_MARK, PSA11_PSA10_FN1, PTC2_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA11_PSA10_FN2, PTC2_FN),
- PINMUX_DATA(IDED9_MARK, PSA11_PSA10_FN1, PTC1_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA11_PSA10_FN2, PTC1_FN),
- PINMUX_DATA(IDED8_MARK, PSA11_PSA10_FN1, PTC0_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA11_PSA10_FN2, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(IDED7_MARK, PSA11_PSA10_FN1, PTD7_FN),
- PINMUX_DATA(SDHI0CD_PTD_MARK, PSA11_PSA10_FN2, PTD7_FN),
- PINMUX_DATA(IDED6_MARK, PSA11_PSA10_FN1, PTD6_FN),
- PINMUX_DATA(SDHI0WP_PTD_MARK, PSA11_PSA10_FN2, PTD6_FN),
- PINMUX_DATA(IDED5_MARK, PSA11_PSA10_FN1, PTD5_FN),
- PINMUX_DATA(SDHI0D3_PTD_MARK, PSA11_PSA10_FN2, PTD5_FN),
- PINMUX_DATA(IDED4_MARK, PSA11_PSA10_FN1, PTD4_FN),
- PINMUX_DATA(SDHI0D2_PTD_MARK, PSA11_PSA10_FN2, PTD4_FN),
- PINMUX_DATA(IDED3_MARK, PSA11_PSA10_FN1, PTD3_FN),
- PINMUX_DATA(SDHI0D1_PTD_MARK, PSA11_PSA10_FN2, PTD3_FN),
- PINMUX_DATA(IDED2_MARK, PSA11_PSA10_FN1, PTD2_FN),
- PINMUX_DATA(SDHI0D0_PTD_MARK, PSA11_PSA10_FN2, PTD2_FN),
- PINMUX_DATA(IDED1_MARK, PSA11_PSA10_FN1, PTD1_FN),
- PINMUX_DATA(SDHI0CMD_PTD_MARK, PSA11_PSA10_FN2, PTD1_FN),
- PINMUX_DATA(IDED0_MARK, PSA11_PSA10_FN1, PTD0_FN),
- PINMUX_DATA(SDHI0CLK_PTD_MARK, PSA11_PSA10_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(DIRECTION_MARK, PSA11_PSA10_FN1, PTE5_FN),
- PINMUX_DATA(SCIF5_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE5_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSA11_PSA10_FN1, PTE4_FN),
- PINMUX_DATA(SCIF5_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE4_FN),
- PINMUX_DATA(IDERST_MARK, PSA11_PSA10_FN1, PTE3_FN),
- PINMUX_DATA(SCIF5_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE3_FN),
- PINMUX_DATA(IODACK_MARK, PSA11_PSA10_FN1, PTE2_FN),
- PINMUX_DATA(SCIF4_PTE_SCK_MARK, PSA11_PSA10_FN2, PTE2_FN),
- PINMUX_DATA(IODREQ_MARK, PSA11_PSA10_FN1, PTE1_FN),
- PINMUX_DATA(SCIF4_PTE_RXD_MARK, PSA11_PSA10_FN2, PTE1_FN),
- PINMUX_DATA(IDEIORDY_MARK, PSA11_PSA10_FN1, PTE0_FN),
- PINMUX_DATA(SCIF4_PTE_TXD_MARK, PSA11_PSA10_FN2, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(IDEINT_MARK, PTF7_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA5_PSA4_FN1, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_SS2_MARK, PSA5_PSA4_FN2, PTF6_FN),
- PINMUX_DATA(MSIOF0_PTF_RSYNC_MARK, PSA5_PSA4_FN3, PTF6_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA5_PSA4_FN1, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_SS1_MARK, PSA5_PSA4_FN2, PTF5_FN),
- PINMUX_DATA(MSIOF0_PTF_RSCK_MARK, PSA5_PSA4_FN3, PTF5_FN),
- PINMUX_DATA(IDECS1_MARK, PSA11_PSA10_FN1, PTF4_FN),
- PINMUX_DATA(MSIOF0_PTF_TSYNC_MARK, PSA11_PSA10_FN2, PTF4_FN),
- PINMUX_DATA(IDECS0_MARK, PSA11_PSA10_FN1, PTF3_FN),
- PINMUX_DATA(MSIOF0_PTF_TSCK_MARK, PSA11_PSA10_FN2, PTF3_FN),
- PINMUX_DATA(IDEA2_MARK, PSA11_PSA10_FN1, PTF2_FN),
- PINMUX_DATA(MSIOF0_PTF_RXD_MARK, PSA11_PSA10_FN2, PTF2_FN),
- PINMUX_DATA(IDEA1_MARK, PSA11_PSA10_FN1, PTF1_FN),
- PINMUX_DATA(MSIOF0_PTF_TXD_MARK, PSA11_PSA10_FN2, PTF1_FN),
- PINMUX_DATA(IDEA0_MARK, PSA11_PSA10_FN1, PTF0_FN),
- PINMUX_DATA(MSIOF0_PTF_MCK_MARK, PSA11_PSA10_FN2, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PSA3_PSA2_FN1, PTG3_FN),
- PINMUX_DATA(TPUTO3_MARK, PSA3_PSA2_FN2, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PSA3_PSA2_FN1, PTG2_FN),
- PINMUX_DATA(TPUTO2_MARK, PSA3_PSA2_FN2, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PSA3_PSA2_FN1, PTG1_FN),
- PINMUX_DATA(TPUTO1_MARK, PSA3_PSA2_FN2, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PSA3_PSA2_FN1, PTG0_FN),
- PINMUX_DATA(TPUTO0_MARK, PSA3_PSA2_FN2, PTG0_FN),
-
- /* PTG FN */
- PINMUX_DATA(LCDVCPWC_MARK, PTH7_FN),
- PINMUX_DATA(LCDRD_MARK, PSB15_PSB14_FN1, PTH6_FN),
- PINMUX_DATA(DV_CLKI_MARK, PSB15_PSB14_FN2, PTH6_FN),
- PINMUX_DATA(LCDVSYN_MARK, PSB15_PSB14_FN1, PTH5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSB15_PSB14_FN2, PTH5_FN),
- PINMUX_DATA(LCDDISP_MARK, PSB13_PSB12_LCDC_RGB, PTH4_FN),
- PINMUX_DATA(LCDRS_MARK, PSB13_PSB12_LCDC_SYS, PTH4_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSB13_PSB12_LCDC_RGB, PTH3_FN),
- PINMUX_DATA(LCDCS_MARK, PSB13_PSB12_LCDC_SYS, PTH3_FN),
- PINMUX_DATA(LCDDON_MARK, PTH2_FN),
- PINMUX_DATA(LCDDCK_MARK, PSB13_PSB12_LCDC_RGB, PTH1_FN),
- PINMUX_DATA(LCDWR_MARK, PSB13_PSB12_LCDC_SYS, PTH1_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(STATUS0_MARK, PTJ7_FN),
- PINMUX_DATA(PDSTATUS_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(SIUAFCK_MARK, PTK7_FN),
- PINMUX_DATA(SIUAILR_MARK, PSB9_PSB8_FN1, PTK6_FN),
- PINMUX_DATA(MSIOF1_SS2_MARK, PSB9_PSB8_FN2, PTK6_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSB9_PSB8_FN3, PTK6_FN),
- PINMUX_DATA(SIUAIBT_MARK, PSB9_PSB8_FN1, PTK5_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSB9_PSB8_FN2, PTK5_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSB9_PSB8_FN3, PTK5_FN),
- PINMUX_DATA(SIUAISLD_MARK, PSB7_PSB6_FN1, PTK4_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK4_FN),
- PINMUX_DATA(SIUAOLR_MARK, PSB7_PSB6_FN1, PTK3_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSB7_PSB6_FN2, PTK3_FN),
- PINMUX_DATA(SIUAOBT_MARK, PSB7_PSB6_FN1, PTK2_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSB7_PSB6_FN2, PTK2_FN),
- PINMUX_DATA(SIUAOSLD_MARK, PSB7_PSB6_FN1, PTK1_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSB7_PSB6_FN2, PTK1_FN),
- PINMUX_DATA(SIUAMCK_MARK, PSB7_PSB6_FN1, PTK0_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSB7_PSB6_FN2, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(LCDD15_MARK, PSB5_PSB4_FN1, PTL7_FN),
- PINMUX_DATA(DV_D15_MARK, PSB5_PSB4_FN2, PTL7_FN),
- PINMUX_DATA(LCDD14_MARK, PSB5_PSB4_FN1, PTL6_FN),
- PINMUX_DATA(DV_D14_MARK, PSB5_PSB4_FN2, PTL6_FN),
- PINMUX_DATA(LCDD13_MARK, PSB5_PSB4_FN1, PTL5_FN),
- PINMUX_DATA(DV_D13_MARK, PSB5_PSB4_FN2, PTL5_FN),
- PINMUX_DATA(LCDD12_MARK, PSB5_PSB4_FN1, PTL4_FN),
- PINMUX_DATA(DV_D12_MARK, PSB5_PSB4_FN2, PTL4_FN),
- PINMUX_DATA(LCDD11_MARK, PSB5_PSB4_FN1, PTL3_FN),
- PINMUX_DATA(DV_D11_MARK, PSB5_PSB4_FN2, PTL3_FN),
- PINMUX_DATA(LCDD10_MARK, PSB5_PSB4_FN1, PTL2_FN),
- PINMUX_DATA(DV_D10_MARK, PSB5_PSB4_FN2, PTL2_FN),
- PINMUX_DATA(LCDD9_MARK, PSB5_PSB4_FN1, PTL1_FN),
- PINMUX_DATA(DV_D9_MARK, PSB5_PSB4_FN2, PTL1_FN),
- PINMUX_DATA(LCDD8_MARK, PSB5_PSB4_FN1, PTL0_FN),
- PINMUX_DATA(DV_D8_MARK, PSB5_PSB4_FN2, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(LCDD7_MARK, PSB5_PSB4_FN1, PTM7_FN),
- PINMUX_DATA(DV_D7_MARK, PSB5_PSB4_FN2, PTM7_FN),
- PINMUX_DATA(LCDD6_MARK, PSB5_PSB4_FN1, PTM6_FN),
- PINMUX_DATA(DV_D6_MARK, PSB5_PSB4_FN2, PTM6_FN),
- PINMUX_DATA(LCDD5_MARK, PSB5_PSB4_FN1, PTM5_FN),
- PINMUX_DATA(DV_D5_MARK, PSB5_PSB4_FN2, PTM5_FN),
- PINMUX_DATA(LCDD4_MARK, PSB5_PSB4_FN1, PTM4_FN),
- PINMUX_DATA(DV_D4_MARK, PSB5_PSB4_FN2, PTM4_FN),
- PINMUX_DATA(LCDD3_MARK, PSB5_PSB4_FN1, PTM3_FN),
- PINMUX_DATA(DV_D3_MARK, PSB5_PSB4_FN2, PTM3_FN),
- PINMUX_DATA(LCDD2_MARK, PSB5_PSB4_FN1, PTM2_FN),
- PINMUX_DATA(DV_D2_MARK, PSB5_PSB4_FN2, PTM2_FN),
- PINMUX_DATA(LCDD1_MARK, PSB5_PSB4_FN1, PTM1_FN),
- PINMUX_DATA(DV_D1_MARK, PSB5_PSB4_FN2, PTM1_FN),
- PINMUX_DATA(LCDD0_MARK, PSB5_PSB4_FN1, PTM0_FN),
- PINMUX_DATA(DV_D0_MARK, PSB5_PSB4_FN2, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(LCDD23_MARK, PSB3_PSB2_FN1, PTN7_FN),
- PINMUX_DATA(SCIF5_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN7_FN),
- PINMUX_DATA(LCDD22_MARK, PSB3_PSB2_FN1, PTN6_FN),
- PINMUX_DATA(SCIF5_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN6_FN),
- PINMUX_DATA(LCDD21_MARK, PSB3_PSB2_FN1, PTN5_FN),
- PINMUX_DATA(SCIF5_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN5_FN),
- PINMUX_DATA(LCDD20_MARK, PSB3_PSB2_FN1, PTN4_FN),
- PINMUX_DATA(SCIF4_PTN_SCK_MARK, PSB3_PSB2_FN2, PTN4_FN),
- PINMUX_DATA(LCDD19_MARK, PSB3_PSB2_FN1, PTN3_FN),
- PINMUX_DATA(SCIF4_PTN_RXD_MARK, PSB3_PSB2_FN2, PTN3_FN),
- PINMUX_DATA(LCDD18_MARK, PSB3_PSB2_FN1, PTN2_FN),
- PINMUX_DATA(SCIF4_PTN_TXD_MARK, PSB3_PSB2_FN2, PTN2_FN),
- PINMUX_DATA(LCDD17_MARK, PSB5_PSB4_FN1, PTN1_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSB5_PSB4_FN2, PTN1_FN),
- PINMUX_DATA(LCDD16_MARK, PSB5_PSB4_FN1, PTN0_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_PSB4_FN2, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(AN3_MARK, PTQ3_FN),
- PINMUX_DATA(AN2_MARK, PTQ2_FN),
- PINMUX_DATA(AN1_MARK, PTQ1_FN),
- PINMUX_DATA(AN0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA13_PSA12_FN1, PTR3_FN),
- PINMUX_DATA(LCDLCLK_PTR_MARK, PSA13_PSA12_FN2, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SCIF1_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS7_FN),
- PINMUX_DATA(SDHI0CD_PTS_MARK, PSC15_PSC14_FN2, PTS7_FN),
- PINMUX_DATA(SCIF1_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS6_FN),
- PINMUX_DATA(SDHI0WP_PTS_MARK, PSC15_PSC14_FN2, PTS6_FN),
- PINMUX_DATA(SCIF1_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS5_FN),
- PINMUX_DATA(SDHI0D3_PTS_MARK, PSC15_PSC14_FN2, PTS5_FN),
- PINMUX_DATA(SCIF3_PTS_CTS_MARK, PSC15_PSC14_FN1, PTS4_FN),
- PINMUX_DATA(SDHI0D2_PTS_MARK, PSC15_PSC14_FN2, PTS4_FN),
- PINMUX_DATA(SCIF3_PTS_RTS_MARK, PSC15_PSC14_FN1, PTS3_FN),
- PINMUX_DATA(SDHI0D1_PTS_MARK, PSC15_PSC14_FN2, PTS3_FN),
- PINMUX_DATA(SCIF3_PTS_SCK_MARK, PSC15_PSC14_FN1, PTS2_FN),
- PINMUX_DATA(SDHI0D0_PTS_MARK, PSC15_PSC14_FN2, PTS2_FN),
- PINMUX_DATA(SCIF3_PTS_RXD_MARK, PSC15_PSC14_FN1, PTS1_FN),
- PINMUX_DATA(SDHI0CMD_PTS_MARK, PSC15_PSC14_FN2, PTS1_FN),
- PINMUX_DATA(SCIF3_PTS_TXD_MARK, PSC15_PSC14_FN1, PTS0_FN),
- PINMUX_DATA(SDHI0CLK_PTS_MARK, PSC15_PSC14_FN2, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(SCIF0_PTT_SCK_MARK, PSC13_PSC12_FN1, PTT5_FN),
- PINMUX_DATA(MSIOF0_PTT_TSCK_MARK, PSC13_PSC12_FN2, PTT5_FN),
- PINMUX_DATA(SCIF0_PTT_RXD_MARK, PSC13_PSC12_FN1, PTT4_FN),
- PINMUX_DATA(MSIOF0_PTT_RXD_MARK, PSC13_PSC12_FN2, PTT4_FN),
- PINMUX_DATA(SCIF0_PTT_TXD_MARK, PSC13_PSC12_FN1, PTT3_FN),
- PINMUX_DATA(MSIOF0_PTT_TXD_MARK, PSC13_PSC12_FN2, PTT3_FN),
- PINMUX_DATA(SCIF2_PTT_SCK_MARK, PSC11_PSC10_FN1, PTT2_FN),
- PINMUX_DATA(MSIOF0_PTT_TSYNC_MARK, PSC11_PSC10_FN2, PTT2_FN),
- PINMUX_DATA(SCIF2_PTT_RXD_MARK, PSC11_PSC10_FN1, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_SS1_MARK, PSC11_PSC10_FN2, PTT1_FN),
- PINMUX_DATA(MSIOF0_PTT_RSCK_MARK, PSC11_PSC10_FN3, PTT1_FN),
- PINMUX_DATA(SCIF2_PTT_TXD_MARK, PSC11_PSC10_FN1, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_SS2_MARK, PSC11_PSC10_FN2, PTT0_FN),
- PINMUX_DATA(MSIOF0_PTT_RSYNC_MARK, PSC11_PSC10_FN3, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(FCDE_MARK, PSC9_PSC8_FN1, PTU5_FN),
- PINMUX_DATA(SCIF0_PTU_SCK_MARK, PSC9_PSC8_FN2, PTU5_FN),
- PINMUX_DATA(FSC_MARK, PSC9_PSC8_FN1, PTU4_FN),
- PINMUX_DATA(SCIF0_PTU_RXD_MARK, PSC9_PSC8_FN2, PTU4_FN),
- PINMUX_DATA(FWE_MARK, PSC9_PSC8_FN1, PTU3_FN),
- PINMUX_DATA(SCIF0_PTU_TXD_MARK, PSC9_PSC8_FN2, PTU3_FN),
- PINMUX_DATA(FOE_MARK, PSC7_PSC6_FN1, PTU2_FN),
- PINMUX_DATA(SCIF2_PTU_SCK_MARK, PSC7_PSC6_FN2, PTU2_FN),
- PINMUX_DATA(VIO_VD2_MARK, PSC7_PSC6_FN3, PTU2_FN),
- PINMUX_DATA(FRB_MARK, PSC7_PSC6_FN1, PTU1_FN),
- PINMUX_DATA(SCIF2_PTU_RXD_MARK, PSC7_PSC6_FN2, PTU1_FN),
- PINMUX_DATA(VIO_CLK2_MARK, PSC7_PSC6_FN3, PTU1_FN),
- PINMUX_DATA(FCE_MARK, PSC7_PSC6_FN1, PTU0_FN),
- PINMUX_DATA(SCIF2_PTU_TXD_MARK, PSC7_PSC6_FN2, PTU0_FN),
- PINMUX_DATA(VIO_HD2_MARK, PSC7_PSC6_FN3, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(NAF7_MARK, PSC7_PSC6_FN1, PTV7_FN),
- PINMUX_DATA(SCIF1_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV7_FN),
- PINMUX_DATA(VIO_D15_MARK, PSC7_PSC6_FN3, PTV7_FN),
- PINMUX_DATA(NAF6_MARK, PSC7_PSC6_FN1, PTV6_FN),
- PINMUX_DATA(SCIF1_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV6_FN),
- PINMUX_DATA(VIO_D14_MARK, PSC7_PSC6_FN3, PTV6_FN),
- PINMUX_DATA(NAF5_MARK, PSC7_PSC6_FN1, PTV5_FN),
- PINMUX_DATA(SCIF1_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV5_FN),
- PINMUX_DATA(VIO_D13_MARK, PSC7_PSC6_FN3, PTV5_FN),
- PINMUX_DATA(NAF4_MARK, PSC7_PSC6_FN1, PTV4_FN),
- PINMUX_DATA(SCIF3_PTV_CTS_MARK, PSC7_PSC6_FN2, PTV4_FN),
- PINMUX_DATA(VIO_D12_MARK, PSC7_PSC6_FN3, PTV4_FN),
- PINMUX_DATA(NAF3_MARK, PSC7_PSC6_FN1, PTV3_FN),
- PINMUX_DATA(SCIF3_PTV_RTS_MARK, PSC7_PSC6_FN2, PTV3_FN),
- PINMUX_DATA(VIO_D11_MARK, PSC7_PSC6_FN3, PTV3_FN),
- PINMUX_DATA(NAF2_MARK, PSC7_PSC6_FN1, PTV2_FN),
- PINMUX_DATA(SCIF3_PTV_SCK_MARK, PSC7_PSC6_FN2, PTV2_FN),
- PINMUX_DATA(VIO_D10_MARK, PSC7_PSC6_FN3, PTV2_FN),
- PINMUX_DATA(NAF1_MARK, PSC7_PSC6_FN1, PTV1_FN),
- PINMUX_DATA(SCIF3_PTV_RXD_MARK, PSC7_PSC6_FN2, PTV1_FN),
- PINMUX_DATA(VIO_D9_MARK, PSC7_PSC6_FN3, PTV1_FN),
- PINMUX_DATA(NAF0_MARK, PSC7_PSC6_FN1, PTV0_FN),
- PINMUX_DATA(SCIF3_PTV_TXD_MARK, PSC7_PSC6_FN2, PTV0_FN),
- PINMUX_DATA(VIO_D8_MARK, PSC7_PSC6_FN3, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(IRQ7_MARK, PTW7_FN),
- PINMUX_DATA(IRQ6_MARK, PTW6_FN),
- PINMUX_DATA(IRQ5_MARK, PTW5_FN),
- PINMUX_DATA(IRQ4_MARK, PSD15_PSD14_FN1, PTW4_FN),
- PINMUX_DATA(LCDLCLK_PTW_MARK, PSD15_PSD14_FN2, PTW4_FN),
- PINMUX_DATA(IRQ3_MARK, PSD13_PSD12_FN1, PTW3_FN),
- PINMUX_DATA(ADTRG_MARK, PSD13_PSD12_FN2, PTW3_FN),
- PINMUX_DATA(IRQ2_MARK, PSD11_PSD10_FN1, PTW2_FN),
- PINMUX_DATA(BS_MARK, PSD11_PSD10_FN2, PTW2_FN),
- PINMUX_DATA(VIO_CKO_MARK, PSD11_PSD10_FN3, PTW2_FN),
- PINMUX_DATA(IRQ1_MARK, PSD9_PSD8_FN1, PTW1_FN),
- PINMUX_DATA(SIUAISPD_MARK, PSD9_PSD8_FN2, PTW1_FN),
- PINMUX_DATA(IRQ0_MARK, PSD7_PSD6_FN1, PTW0_FN),
- PINMUX_DATA(SIUAOSPD_MARK, PSD7_PSD6_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(DACK1_MARK, PTX7_FN),
- PINMUX_DATA(DREQ1_MARK, PSD3_PSD2_FN1, PTX6_FN),
- PINMUX_DATA(MSIOF0_PTX_MCK_MARK, PSD3_PSD2_FN2, PTX6_FN),
- PINMUX_DATA(DACK1_MARK, PTX5_FN),
- PINMUX_DATA(IRDA_OUT_MARK, PSD5_PSD4_FN2, PTX5_FN),
- PINMUX_DATA(DREQ1_MARK, PTX4_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSD5_PSD4_FN2, PTX4_FN),
- PINMUX_DATA(TS0_SDAT_MARK, PTX3_FN),
- PINMUX_DATA(TS0_SCK_MARK, PTX2_FN),
- PINMUX_DATA(TS0_SDEN_MARK, PTX1_FN),
- PINMUX_DATA(TS0_SPSYNC_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(VIO_D7_MARK, PTY7_FN),
- PINMUX_DATA(VIO_D6_MARK, PTY6_FN),
- PINMUX_DATA(VIO_D5_MARK, PTY5_FN),
- PINMUX_DATA(VIO_D4_MARK, PTY4_FN),
- PINMUX_DATA(VIO_D3_MARK, PTY3_FN),
- PINMUX_DATA(VIO_D2_MARK, PTY2_FN),
- PINMUX_DATA(VIO_D1_MARK, PTY1_FN),
- PINMUX_DATA(VIO_D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(SIUBOBT_MARK, PTZ7_FN),
- PINMUX_DATA(SIUBOLR_MARK, PTZ6_FN),
- PINMUX_DATA(SIUBOSLD_MARK, PTZ5_FN),
- PINMUX_DATA(SIUBMCK_MARK, PTZ4_FN),
- PINMUX_DATA(VIO_FLD_MARK, PSD1_PSD0_FN1, PTZ3_FN),
- PINMUX_DATA(SIUBFCK_MARK, PSD1_PSD0_FN2, PTZ3_FN),
- PINMUX_DATA(VIO_HD1_MARK, PSD1_PSD0_FN1, PTZ2_FN),
- PINMUX_DATA(SIUBILR_MARK, PSD1_PSD0_FN2, PTZ2_FN),
- PINMUX_DATA(VIO_VD1_MARK, PSD1_PSD0_FN1, PTZ1_FN),
- PINMUX_DATA(SIUBIBT_MARK, PSD1_PSD0_FN2, PTZ1_FN),
- PINMUX_DATA(VIO_CLK1_MARK, PSD1_PSD0_FN1, PTZ0_FN),
- PINMUX_DATA(SIUBISLD_MARK, PSD1_PSD0_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* SCIF0 */
- GPIO_FN(SCIF0_PTT_TXD),
- GPIO_FN(SCIF0_PTT_RXD),
- GPIO_FN(SCIF0_PTT_SCK),
- GPIO_FN(SCIF0_PTU_TXD),
- GPIO_FN(SCIF0_PTU_RXD),
- GPIO_FN(SCIF0_PTU_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_PTS_TXD),
- GPIO_FN(SCIF1_PTS_RXD),
- GPIO_FN(SCIF1_PTS_SCK),
- GPIO_FN(SCIF1_PTV_TXD),
- GPIO_FN(SCIF1_PTV_RXD),
- GPIO_FN(SCIF1_PTV_SCK),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_PTT_TXD),
- GPIO_FN(SCIF2_PTT_RXD),
- GPIO_FN(SCIF2_PTT_SCK),
- GPIO_FN(SCIF2_PTU_TXD),
- GPIO_FN(SCIF2_PTU_RXD),
- GPIO_FN(SCIF2_PTU_SCK),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_PTS_TXD),
- GPIO_FN(SCIF3_PTS_RXD),
- GPIO_FN(SCIF3_PTS_SCK),
- GPIO_FN(SCIF3_PTS_RTS),
- GPIO_FN(SCIF3_PTS_CTS),
- GPIO_FN(SCIF3_PTV_TXD),
- GPIO_FN(SCIF3_PTV_RXD),
- GPIO_FN(SCIF3_PTV_SCK),
- GPIO_FN(SCIF3_PTV_RTS),
- GPIO_FN(SCIF3_PTV_CTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_PTE_TXD),
- GPIO_FN(SCIF4_PTE_RXD),
- GPIO_FN(SCIF4_PTE_SCK),
- GPIO_FN(SCIF4_PTN_TXD),
- GPIO_FN(SCIF4_PTN_RXD),
- GPIO_FN(SCIF4_PTN_SCK),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_PTE_TXD),
- GPIO_FN(SCIF5_PTE_RXD),
- GPIO_FN(SCIF5_PTE_SCK),
- GPIO_FN(SCIF5_PTN_TXD),
- GPIO_FN(SCIF5_PTN_RXD),
- GPIO_FN(SCIF5_PTN_SCK),
-
- /* CEU */
- GPIO_FN(VIO_D15),
- GPIO_FN(VIO_D14),
- GPIO_FN(VIO_D13),
- GPIO_FN(VIO_D12),
- GPIO_FN(VIO_D11),
- GPIO_FN(VIO_D10),
- GPIO_FN(VIO_D9),
- GPIO_FN(VIO_D8),
- GPIO_FN(VIO_D7),
- GPIO_FN(VIO_D6),
- GPIO_FN(VIO_D5),
- GPIO_FN(VIO_D4),
- GPIO_FN(VIO_D3),
- GPIO_FN(VIO_D2),
- GPIO_FN(VIO_D1),
- GPIO_FN(VIO_D0),
- GPIO_FN(VIO_CLK1),
- GPIO_FN(VIO_VD1),
- GPIO_FN(VIO_HD1),
- GPIO_FN(VIO_FLD),
- GPIO_FN(VIO_CKO),
- GPIO_FN(VIO_VD2),
- GPIO_FN(VIO_HD2),
- GPIO_FN(VIO_CLK2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDLCLK_PTR),
- GPIO_FN(LCDLCLK_PTW),
- /* Main LCD */
- GPIO_FN(LCDDON),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVSYN),
- /* Main LCD - RGB Mode */
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDDISP),
- /* Main LCD - SYS Mode */
- GPIO_FN(LCDRS),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDRD),
-
- /* IRQ */
- GPIO_FN(IRQ0),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ7),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* SDHI0 (PTD) */
- GPIO_FN(SDHI0CD_PTD),
- GPIO_FN(SDHI0WP_PTD),
- GPIO_FN(SDHI0D3_PTD),
- GPIO_FN(SDHI0D2_PTD),
- GPIO_FN(SDHI0D1_PTD),
- GPIO_FN(SDHI0D0_PTD),
- GPIO_FN(SDHI0CMD_PTD),
- GPIO_FN(SDHI0CLK_PTD),
-
- /* SDHI0 (PTS) */
- GPIO_FN(SDHI0CD_PTS),
- GPIO_FN(SDHI0WP_PTS),
- GPIO_FN(SDHI0D3_PTS),
- GPIO_FN(SDHI0D2_PTS),
- GPIO_FN(SDHI0D1_PTS),
- GPIO_FN(SDHI0D0_PTS),
- GPIO_FN(SDHI0CMD_PTS),
- GPIO_FN(SDHI0CLK_PTS),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
-
- /* SIUA */
- GPIO_FN(SIUAFCK),
- GPIO_FN(SIUAILR),
- GPIO_FN(SIUAIBT),
- GPIO_FN(SIUAISLD),
- GPIO_FN(SIUAOLR),
- GPIO_FN(SIUAOBT),
- GPIO_FN(SIUAOSLD),
- GPIO_FN(SIUAMCK),
- GPIO_FN(SIUAISPD),
- GPIO_FN(SIUAOSPD),
-
- /* SIUB */
- GPIO_FN(SIUBFCK),
- GPIO_FN(SIUBILR),
- GPIO_FN(SIUBIBT),
- GPIO_FN(SIUBISLD),
- GPIO_FN(SIUBOLR),
- GPIO_FN(SIUBOBT),
- GPIO_FN(SIUBOSLD),
- GPIO_FN(SIUBMCK),
-
- /* IRDA */
- GPIO_FN(IRDA_IN),
- GPIO_FN(IRDA_OUT),
-
- /* VOU */
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_HSYNC),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
-
- /* KEYSC */
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYOUT0),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYOUT5_IN5),
-
- /* MSIOF0 (PTF) */
- GPIO_FN(MSIOF0_PTF_TXD),
- GPIO_FN(MSIOF0_PTF_RXD),
- GPIO_FN(MSIOF0_PTF_MCK),
- GPIO_FN(MSIOF0_PTF_TSYNC),
- GPIO_FN(MSIOF0_PTF_TSCK),
- GPIO_FN(MSIOF0_PTF_RSYNC),
- GPIO_FN(MSIOF0_PTF_RSCK),
- GPIO_FN(MSIOF0_PTF_SS1),
- GPIO_FN(MSIOF0_PTF_SS2),
-
- /* MSIOF0 (PTT+PTX) */
- GPIO_FN(MSIOF0_PTT_TXD),
- GPIO_FN(MSIOF0_PTT_RXD),
- GPIO_FN(MSIOF0_PTX_MCK),
- GPIO_FN(MSIOF0_PTT_TSYNC),
- GPIO_FN(MSIOF0_PTT_TSCK),
- GPIO_FN(MSIOF0_PTT_RSYNC),
- GPIO_FN(MSIOF0_PTT_RSCK),
- GPIO_FN(MSIOF0_PTT_SS1),
- GPIO_FN(MSIOF0_PTT_SS2),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_RSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
-
- /* TSIF */
- GPIO_FN(TS0_SDAT),
- GPIO_FN(TS0_SCK),
- GPIO_FN(TS0_SDEN),
- GPIO_FN(TS0_SPSYNC),
-
- /* FLCTL */
- GPIO_FN(FCE),
- GPIO_FN(NAF7),
- GPIO_FN(NAF6),
- GPIO_FN(NAF5),
- GPIO_FN(NAF4),
- GPIO_FN(NAF3),
- GPIO_FN(NAF2),
- GPIO_FN(NAF1),
- GPIO_FN(NAF0),
- GPIO_FN(FCDE),
- GPIO_FN(FOE),
- GPIO_FN(FSC),
- GPIO_FN(FWE),
- GPIO_FN(FRB),
-
- /* DMAC */
- GPIO_FN(DACK1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ0),
-
- /* ADC */
- GPIO_FN(AN3),
- GPIO_FN(AN2),
- GPIO_FN(AN1),
- GPIO_FN(AN0),
- GPIO_FN(ADTRG),
-
- /* CPG */
- GPIO_FN(STATUS0),
- GPIO_FN(PDSTATUS),
-
- /* TPU */
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO3),
-
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IODREQ),
- GPIO_FN(IDEIORDY),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IDEIORD),
- GPIO_FN(IDECS1),
- GPIO_FN(IDECS0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xa4050108, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PJCR", 0xa4050110, 16,
- GROUP(2, -2, 2, -2, 2, 2, 2, 2),
- GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ5_FN, PTJ5_OUT, 0, 0,
- /* RESERVED [2] */
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xa405011a, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PTQ3_FN, 0, 0, PTQ3_IN,
- PTQ2_FN, 0, 0, PTQ2_IN,
- PTQ1_FN, 0, 0, PTQ1_IN,
- PTQ0_FN, 0, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, 0, PTS7_IN,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PTCR", 0xa4050140, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PUCR", 0xa4050142, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PSELA", 0xa405014e, 16,
- GROUP(2, 2, 2, -4, 2, 2, -2),
- GROUP(
- PSA15_PSA14_FN1, PSA15_PSA14_FN2, 0, 0,
- PSA13_PSA12_FN1, PSA13_PSA12_FN2, 0, 0,
- PSA11_PSA10_FN1, PSA11_PSA10_FN2, 0, 0,
- /* RESERVED [4] */
- PSA5_PSA4_FN1, PSA5_PSA4_FN2, PSA5_PSA4_FN3, 0,
- PSA3_PSA2_FN1, PSA3_PSA2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELB", 0xa4050150, 16,
- GROUP(2, 2, -2, 2, 2, 2, 2, -2),
- GROUP(
- PSB15_PSB14_FN1, PSB15_PSB14_FN2, 0, 0,
- PSB13_PSB12_LCDC_RGB, PSB13_PSB12_LCDC_SYS, 0, 0,
- /* RESERVED [2] */
- PSB9_PSB8_FN1, PSB9_PSB8_FN2, PSB9_PSB8_FN3, 0,
- PSB7_PSB6_FN1, PSB7_PSB6_FN2, 0, 0,
- PSB5_PSB4_FN1, PSB5_PSB4_FN2, 0, 0,
- PSB3_PSB2_FN1, PSB3_PSB2_FN2, 0, 0,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSELC", 0xa4050152, 16,
- GROUP(2, 2, 2, 2, 2, -6),
- GROUP(
- PSC15_PSC14_FN1, PSC15_PSC14_FN2, 0, 0,
- PSC13_PSC12_FN1, PSC13_PSC12_FN2, 0, 0,
- PSC11_PSC10_FN1, PSC11_PSC10_FN2, PSC11_PSC10_FN3, 0,
- PSC9_PSC8_FN1, PSC9_PSC8_FN2, 0, 0,
- PSC7_PSC6_FN1, PSC7_PSC6_FN2, PSC7_PSC6_FN3, 0,
- /* RESERVED [3] */ ))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 2, GROUP(
- PSD15_PSD14_FN1, PSD15_PSD14_FN2, 0, 0,
- PSD13_PSD12_FN1, PSD13_PSD12_FN2, 0, 0,
- PSD11_PSD10_FN1, PSD11_PSD10_FN2, PSD11_PSD10_FN3, 0,
- PSD9_PSD8_FN1, PSD9_PSD8_FN2, 0, 0,
- PSD7_PSD6_FN1, PSD7_PSD6_FN2, 0, 0,
- PSD5_PSD4_FN1, PSD5_PSD4_FN2, 0, 0,
- PSD3_PSD2_FN1, PSD3_PSD2_FN2, 0, 0,
- PSD1_PSD0_FN1, PSD1_PSD0_FN2, 0, 0 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- 0, 0, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, 0, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- 0, 0, 0, 0,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- 0, 0, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- 0, 0, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7723_pinmux_info = {
- .name = "sh7723_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7724.c b/drivers/pinctrl/renesas/pfc-sh7724.c
deleted file mode 100644
index 26517ad26a0fd1..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7724.c
+++ /dev/null
@@ -1,2177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7724 Pinmux
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7724.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR1_OUT, PTR0_OUT,
- PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTJ7_FN, PTJ6_FN, PTJ5_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
-
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1,
-
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1,
-
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1,
-
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1,
-
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /*PTA*/
- D23_MARK, KEYOUT2_MARK, IDED15_MARK,
- D22_MARK, KEYOUT1_MARK, IDED14_MARK,
- D21_MARK, KEYOUT0_MARK, IDED13_MARK,
- D20_MARK, KEYIN4_MARK, IDED12_MARK,
- D19_MARK, KEYIN3_MARK, IDED11_MARK,
- D18_MARK, KEYIN2_MARK, IDED10_MARK,
- D17_MARK, KEYIN1_MARK, IDED9_MARK,
- D16_MARK, KEYIN0_MARK, IDED8_MARK,
-
- /*PTB*/
- D31_MARK, TPUTO1_MARK, IDEA1_MARK,
- D30_MARK, TPUTO0_MARK, IDEA0_MARK,
- D29_MARK, IODREQ_MARK,
- D28_MARK, IDECS0_MARK,
- D27_MARK, IDECS1_MARK,
- D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK,
- D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK,
- D24_MARK, KEYOUT3_MARK, IDEINT_MARK,
-
- /*PTC*/
- LCDD7_MARK,
- LCDD6_MARK,
- LCDD5_MARK,
- LCDD4_MARK,
- LCDD3_MARK,
- LCDD2_MARK,
- LCDD1_MARK,
- LCDD0_MARK,
-
- /*PTD*/
- LCDD15_MARK,
- LCDD14_MARK,
- LCDD13_MARK,
- LCDD12_MARK,
- LCDD11_MARK,
- LCDD10_MARK,
- LCDD9_MARK,
- LCDD8_MARK,
-
- /*PTE*/
- FSIMCKB_MARK,
- FSIMCKA_MARK,
- LCDD21_MARK, SCIF2_L_TXD_MARK,
- LCDD20_MARK, SCIF4_SCK_MARK,
- LCDD19_MARK, SCIF4_RXD_MARK,
- LCDD18_MARK, SCIF4_TXD_MARK,
- LCDD17_MARK,
- LCDD16_MARK,
-
- /*PTF*/
- LCDVSYN_MARK,
- LCDDISP_MARK, LCDRS_MARK,
- LCDHSYN_MARK, LCDCS_MARK,
- LCDDON_MARK,
- LCDDCK_MARK, LCDWR_MARK,
- LCDVEPWC_MARK, SCIF0_TXD_MARK,
- LCDD23_MARK, SCIF2_L_SCK_MARK,
- LCDD22_MARK, SCIF2_L_RXD_MARK,
-
- /*PTG*/
- AUDCK_MARK,
- AUDSYNC_MARK,
- AUDATA3_MARK,
- AUDATA2_MARK,
- AUDATA1_MARK,
- AUDATA0_MARK,
-
- /*PTH*/
- VIO0_VD_MARK,
- VIO0_CLK_MARK,
- VIO0_D7_MARK,
- VIO0_D6_MARK,
- VIO0_D5_MARK,
- VIO0_D4_MARK,
- VIO0_D3_MARK,
- VIO0_D2_MARK,
-
- /*PTJ*/
- PDSTATUS_MARK,
- STATUS2_MARK,
- STATUS0_MARK,
- A25_MARK, BS_MARK,
- A24_MARK,
- A23_MARK,
- A22_MARK,
-
- /*PTK*/
- VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK,
- VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK,
- VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK,
- VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK,
- VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK,
- VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK,
- VIO0_FLD_MARK,
- VIO0_HD_MARK,
-
- /*PTL*/
- DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK,
- DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK,
- DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK,
- DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK,
- DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK,
- DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK,
- DV_D15_MARK,
- DV_D14_MARK, MSIOF0_MCK_MARK,
-
- /*PTM*/
- DV_D13_MARK, MSIOF0_TSCK_MARK,
- DV_D12_MARK, MSIOF0_RXD_MARK,
- DV_D11_MARK, MSIOF0_TXD_MARK,
- DV_D10_MARK, MSIOF0_TSYNC_MARK,
- DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK,
- DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK,
- LCDVCPWC_MARK, SCIF0_RXD_MARK,
- LCDRD_MARK, SCIF0_SCK_MARK,
-
- /*PTN*/
- VIO0_D1_MARK,
- VIO0_D0_MARK,
- DV_CLKI_MARK,
- DV_CLK_MARK, SCIF2_V_SCK_MARK,
- DV_VSYNC_MARK, SCIF2_V_RXD_MARK,
- DV_HSYNC_MARK, SCIF2_V_TXD_MARK,
- DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK,
- DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK,
-
- /*PTQ*/
- D7_MARK,
- D6_MARK,
- D5_MARK,
- D4_MARK,
- D3_MARK,
- D2_MARK,
- D1_MARK,
- D0_MARK,
-
- /*PTR*/
- CS6B_CE1B_MARK,
- CS6A_CE2B_MARK,
- CS5B_CE1A_MARK,
- CS5A_CE2A_MARK,
- IOIS16_MARK, LCDLCLK_MARK,
- WAIT_MARK,
- WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK,
- WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK,
-
- /*PTS*/
- VIO_CKO_MARK,
- VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK,
- VIO1_HD_MARK, SCIF5_SCK_MARK,
- VIO1_VD_MARK, SCIF5_RXD_MARK,
- VIO1_CLK_MARK, SCIF5_TXD_MARK,
- VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK,
- VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK,
-
- /*PTT*/
- D15_MARK,
- D14_MARK,
- D13_MARK,
- D12_MARK,
- D11_MARK,
- D10_MARK,
- D9_MARK,
- D8_MARK,
-
- /*PTU*/
- DMAC_DACK0_MARK,
- DMAC_DREQ0_MARK,
- FSIOASD_MARK,
- FSIIABCK_MARK,
- FSIIALRCK_MARK,
- FSIOABCK_MARK,
- FSIOALRCK_MARK,
- CLKAUDIOAO_MARK,
-
- /*PTV*/
- FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK,
- FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK,
- FSIIBBCK_MARK, MSIOF1_RXD_MARK,
- FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK,
- FSIOBBCK_MARK, MSIOF1_TSCK_MARK,
- FSIOBLRCK_MARK, MSIOF1_TXD_MARK,
- CLKAUDIOBO_MARK, MSIOF1_MCK_MARK,
- FSIIASD_MARK,
-
- /*PTW*/
- MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK,
- MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK,
- MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK,
- MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK,
- MMC_D3_MARK, SDHI1D1_MARK,
- MMC_D2_MARK, SDHI1D0_MARK,
- MMC_D1_MARK, SDHI1CMD_MARK,
- MMC_D0_MARK, SDHI1CLK_MARK,
-
- /*PTX*/
- DMAC_DACK1_MARK, IRDA_OUT_MARK,
- DMAC_DREQ1_MARK, IRDA_IN_MARK,
- TSIF_TS0_SDAT_MARK, LNKSTA_MARK,
- TSIF_TS0_SCK_MARK, MDIO_MARK,
- TSIF_TS0_SDEN_MARK, MDC_MARK,
- TSIF_TS0_SPSYNC_MARK,
- MMC_CLK_MARK,
- MMC_CMD_MARK,
-
- /*PTY*/
- SDHI0CD_MARK,
- SDHI0WP_MARK,
- SDHI0D3_MARK,
- SDHI0D2_MARK,
- SDHI0D1_MARK,
- SDHI0D0_MARK,
- SDHI0CMD_MARK,
- SDHI0CLK_MARK,
-
- /*PTZ*/
- INTC_IRQ7_MARK, SCIF3_I_CTS_MARK,
- INTC_IRQ6_MARK, SCIF3_I_RTS_MARK,
- INTC_IRQ5_MARK, SCIF3_I_SCK_MARK,
- INTC_IRQ4_MARK, SCIF3_I_RXD_MARK,
- INTC_IRQ3_MARK, SCIF3_I_TXD_MARK,
- INTC_IRQ2_MARK,
- INTC_IRQ1_MARK,
- INTC_IRQ0_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG5_DATA, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
- PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT),
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT),
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN),
- PINMUX_DATA(PTR2_DATA, PTR2_IN),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN),
- PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN),
- PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN),
- PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN),
- PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN),
- PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN),
- PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN),
- PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN),
-
- PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN),
- PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN),
- PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN),
- PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN),
- PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN),
- PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN),
- PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN),
- PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN),
-
- PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN),
- PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN),
- PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN),
- PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN),
- PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN),
- PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN),
- PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN),
- PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN),
- PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN),
- PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN),
- PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN),
- PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN),
- PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN),
- PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN),
- PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN),
- PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN),
- PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN),
- PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN),
- PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN),
- PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN),
- PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN),
- PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN),
-
- PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN),
- PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN),
-
- PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN),
- PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN),
- PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
- PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
- PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
- PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
- PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
- PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
- PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
- PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
- PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
- PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
- PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
- PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
- PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
- PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN),
- PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
- PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
-
- PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN),
- PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN),
- PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN),
- PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN),
- PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN),
- PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN),
-
- PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN),
-
- /* PTF FN */
- PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN),
- PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN),
- PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN),
- PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN),
- PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN),
- PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN),
- PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN),
- PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN),
-
- PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN),
- PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN),
- PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN),
-
- PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN),
- PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN),
- PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(AUDCK_MARK, PTG5_FN),
- PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
- PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
- PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
- PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
- PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(VIO0_VD_MARK, PTH7_FN),
- PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
- PINMUX_DATA(VIO0_D7_MARK, PTH5_FN),
- PINMUX_DATA(VIO0_D6_MARK, PTH4_FN),
- PINMUX_DATA(VIO0_D5_MARK, PTH3_FN),
- PINMUX_DATA(VIO0_D4_MARK, PTH2_FN),
- PINMUX_DATA(VIO0_D3_MARK, PTH1_FN),
- PINMUX_DATA(VIO0_D2_MARK, PTH0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN),
- PINMUX_DATA(STATUS2_MARK, PTJ6_FN),
- PINMUX_DATA(STATUS0_MARK, PTJ5_FN),
- PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN),
- PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN),
- PINMUX_DATA(A24_MARK, PTJ2_FN),
- PINMUX_DATA(A23_MARK, PTJ1_FN),
- PINMUX_DATA(A22_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN),
- PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN),
- PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN),
- PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN),
- PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN),
- PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN),
- PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN),
- PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN),
- PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN),
- PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN),
- PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN),
-
- PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN),
- PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN),
- PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN),
- PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN),
- PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN),
- PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN),
-
- PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN),
- PINMUX_DATA(VIO0_HD_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN),
- PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN),
- PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN),
- PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN),
- PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN),
- PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN),
- PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN),
- PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN),
-
- PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN),
- PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN),
- PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN),
-
- PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN),
- PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN),
- PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN),
- PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN),
- PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN),
- PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN),
-
- PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN),
- PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN),
- PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN),
- PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN),
- PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN),
- PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN),
- PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN),
- PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN),
- PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN),
- PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN),
- PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN),
- PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN),
- PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN),
-
- PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN),
- PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN),
-
- PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VIO0_D1_MARK, PTN7_FN),
- PINMUX_DATA(VIO0_D0_MARK, PTN6_FN),
-
- PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN),
- PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN),
- PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN),
- PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN),
- PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN),
- PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN),
-
- PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN),
- PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN),
- PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN),
- PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN),
- PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN),
-
- PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN),
- PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN),
-
- /* PTQ FN */
- PINMUX_DATA(D7_MARK, PTQ7_FN),
- PINMUX_DATA(D6_MARK, PTQ6_FN),
- PINMUX_DATA(D5_MARK, PTQ5_FN),
- PINMUX_DATA(D4_MARK, PTQ4_FN),
- PINMUX_DATA(D3_MARK, PTQ3_FN),
- PINMUX_DATA(D2_MARK, PTQ2_FN),
- PINMUX_DATA(D1_MARK, PTQ1_FN),
- PINMUX_DATA(D0_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
- PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
- PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
- PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
- PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN),
- PINMUX_DATA(WAIT_MARK, PTR2_FN),
- PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN),
- PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN),
-
- PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN),
-
- PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN),
- PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN),
- PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(VIO_CKO_MARK, PTS6_FN),
-
- PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN),
-
- PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN),
-
- PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN),
- PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN),
- PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN),
- PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN),
- PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN),
- PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN),
-
- PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN),
-
- PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN),
- PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN),
-
- PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN),
- PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(D15_MARK, PTT7_FN),
- PINMUX_DATA(D14_MARK, PTT6_FN),
- PINMUX_DATA(D13_MARK, PTT5_FN),
- PINMUX_DATA(D12_MARK, PTT4_FN),
- PINMUX_DATA(D11_MARK, PTT3_FN),
- PINMUX_DATA(D10_MARK, PTT2_FN),
- PINMUX_DATA(D9_MARK, PTT1_FN),
- PINMUX_DATA(D8_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
- PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
-
- PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN),
- PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN),
- PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN),
- PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN),
- PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN),
- PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN),
- PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN),
- PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN),
- PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN),
- PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN),
- PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN),
- PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN),
- PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN),
-
- PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN),
- PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN),
- PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN),
- PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN),
- PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN),
- PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN),
- PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN),
- PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN),
- PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN),
-
- /* PTW FN */
- PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN),
- PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN),
- PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN),
- PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN),
- PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN),
- PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN),
- PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN),
- PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN),
-
- PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN),
- PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN),
- PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN),
- PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN),
- PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN),
- PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN),
- PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN),
- PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN),
-
- PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN),
- PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN),
- PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN),
- PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN),
-
- /* PTX FN */
- PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN),
- PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN),
-
- PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN),
- PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN),
-
- PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN),
- PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN),
- PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN),
- PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN),
-
- PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN),
- PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN),
- PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN),
-
- PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
- PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(SDHI0CD_MARK, PTY7_FN),
- PINMUX_DATA(SDHI0WP_MARK, PTY6_FN),
- PINMUX_DATA(SDHI0D3_MARK, PTY5_FN),
- PINMUX_DATA(SDHI0D2_MARK, PTY4_FN),
- PINMUX_DATA(SDHI0D1_MARK, PTY3_FN),
- PINMUX_DATA(SDHI0D0_MARK, PTY2_FN),
- PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
- PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN),
- PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN),
- PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN),
- PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN),
- PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN),
- PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN),
- PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN),
- PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN),
-
- PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN),
- PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN),
- PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN),
- PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN),
- PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ7),
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL7),
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN7),
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ7),
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* BSC */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(CS6B_CE1B),
- GPIO_FN(CS6A_CE2B),
- GPIO_FN(CS5B_CE1A),
- GPIO_FN(CS5A_CE2A),
- GPIO_FN(WE3_ICIOWR),
- GPIO_FN(WE2_ICIORD),
- GPIO_FN(IOIS16),
- GPIO_FN(WAIT),
- GPIO_FN(BS),
-
- /* KEYSC */
- GPIO_FN(KEYOUT5_IN5),
- GPIO_FN(KEYOUT4_IN6),
- GPIO_FN(KEYIN4),
- GPIO_FN(KEYIN3),
- GPIO_FN(KEYIN2),
- GPIO_FN(KEYIN1),
- GPIO_FN(KEYIN0),
- GPIO_FN(KEYOUT3),
- GPIO_FN(KEYOUT2),
- GPIO_FN(KEYOUT1),
- GPIO_FN(KEYOUT0),
-
- /* ATAPI */
- GPIO_FN(IDED15),
- GPIO_FN(IDED14),
- GPIO_FN(IDED13),
- GPIO_FN(IDED12),
- GPIO_FN(IDED11),
- GPIO_FN(IDED10),
- GPIO_FN(IDED9),
- GPIO_FN(IDED8),
- GPIO_FN(IDED7),
- GPIO_FN(IDED6),
- GPIO_FN(IDED5),
- GPIO_FN(IDED4),
- GPIO_FN(IDED3),
- GPIO_FN(IDED2),
- GPIO_FN(IDED1),
- GPIO_FN(IDED0),
- GPIO_FN(IDEA2),
- GPIO_FN(IDEA1),
- GPIO_FN(IDEA0),
- GPIO_FN(IDEIOWR),
- GPIO_FN(IODREQ),
- GPIO_FN(IDECS0),
- GPIO_FN(IDECS1),
- GPIO_FN(IDEIORD),
- GPIO_FN(DIRECTION),
- GPIO_FN(EXBUF_ENB),
- GPIO_FN(IDERST),
- GPIO_FN(IODACK),
- GPIO_FN(IDEINT),
- GPIO_FN(IDEIORDY),
-
- /* TPU */
- GPIO_FN(TPUTO3),
- GPIO_FN(TPUTO2),
- GPIO_FN(TPUTO1),
- GPIO_FN(TPUTO0),
- GPIO_FN(TPUTI3),
- GPIO_FN(TPUTI2),
-
- /* LCDC */
- GPIO_FN(LCDD23),
- GPIO_FN(LCDD22),
- GPIO_FN(LCDD21),
- GPIO_FN(LCDD20),
- GPIO_FN(LCDD19),
- GPIO_FN(LCDD18),
- GPIO_FN(LCDD17),
- GPIO_FN(LCDD16),
- GPIO_FN(LCDD15),
- GPIO_FN(LCDD14),
- GPIO_FN(LCDD13),
- GPIO_FN(LCDD12),
- GPIO_FN(LCDD11),
- GPIO_FN(LCDD10),
- GPIO_FN(LCDD9),
- GPIO_FN(LCDD8),
- GPIO_FN(LCDD7),
- GPIO_FN(LCDD6),
- GPIO_FN(LCDD5),
- GPIO_FN(LCDD4),
- GPIO_FN(LCDD3),
- GPIO_FN(LCDD2),
- GPIO_FN(LCDD1),
- GPIO_FN(LCDD0),
- GPIO_FN(LCDVSYN),
- GPIO_FN(LCDDISP),
- GPIO_FN(LCDRS),
- GPIO_FN(LCDHSYN),
- GPIO_FN(LCDCS),
- GPIO_FN(LCDDON),
- GPIO_FN(LCDDCK),
- GPIO_FN(LCDWR),
- GPIO_FN(LCDVEPWC),
- GPIO_FN(LCDVCPWC),
- GPIO_FN(LCDRD),
- GPIO_FN(LCDLCLK),
-
- /* SCIF0 */
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(SCIF0_SCK),
-
- /* SCIF1 */
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
-
- /* SCIF2 */
- GPIO_FN(SCIF2_L_TXD),
- GPIO_FN(SCIF2_L_SCK),
- GPIO_FN(SCIF2_L_RXD),
- GPIO_FN(SCIF2_V_TXD),
- GPIO_FN(SCIF2_V_SCK),
- GPIO_FN(SCIF2_V_RXD),
-
- /* SCIF3 */
- GPIO_FN(SCIF3_V_SCK),
- GPIO_FN(SCIF3_V_RXD),
- GPIO_FN(SCIF3_V_TXD),
- GPIO_FN(SCIF3_V_CTS),
- GPIO_FN(SCIF3_V_RTS),
- GPIO_FN(SCIF3_I_SCK),
- GPIO_FN(SCIF3_I_RXD),
- GPIO_FN(SCIF3_I_TXD),
- GPIO_FN(SCIF3_I_CTS),
- GPIO_FN(SCIF3_I_RTS),
-
- /* SCIF4 */
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(SCIF4_TXD),
-
- /* SCIF5 */
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(SCIF5_TXD),
-
- /* FSI */
- GPIO_FN(FSIMCKB),
- GPIO_FN(FSIMCKA),
- GPIO_FN(FSIOASD),
- GPIO_FN(FSIIABCK),
- GPIO_FN(FSIIALRCK),
- GPIO_FN(FSIOABCK),
- GPIO_FN(FSIOALRCK),
- GPIO_FN(CLKAUDIOAO),
- GPIO_FN(FSIIBSD),
- GPIO_FN(FSIOBSD),
- GPIO_FN(FSIIBBCK),
- GPIO_FN(FSIIBLRCK),
- GPIO_FN(FSIOBBCK),
- GPIO_FN(FSIOBLRCK),
- GPIO_FN(CLKAUDIOBO),
- GPIO_FN(FSIIASD),
-
- /* AUD */
- GPIO_FN(AUDCK),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
-
- /* VIO */
- GPIO_FN(VIO_CKO),
-
- /* VIO0 */
- GPIO_FN(VIO0_D15),
- GPIO_FN(VIO0_D14),
- GPIO_FN(VIO0_D13),
- GPIO_FN(VIO0_D12),
- GPIO_FN(VIO0_D11),
- GPIO_FN(VIO0_D10),
- GPIO_FN(VIO0_D9),
- GPIO_FN(VIO0_D8),
- GPIO_FN(VIO0_D7),
- GPIO_FN(VIO0_D6),
- GPIO_FN(VIO0_D5),
- GPIO_FN(VIO0_D4),
- GPIO_FN(VIO0_D3),
- GPIO_FN(VIO0_D2),
- GPIO_FN(VIO0_D1),
- GPIO_FN(VIO0_D0),
- GPIO_FN(VIO0_VD),
- GPIO_FN(VIO0_CLK),
- GPIO_FN(VIO0_FLD),
- GPIO_FN(VIO0_HD),
-
- /* VIO1 */
- GPIO_FN(VIO1_D7),
- GPIO_FN(VIO1_D6),
- GPIO_FN(VIO1_D5),
- GPIO_FN(VIO1_D4),
- GPIO_FN(VIO1_D3),
- GPIO_FN(VIO1_D2),
- GPIO_FN(VIO1_D1),
- GPIO_FN(VIO1_D0),
- GPIO_FN(VIO1_FLD),
- GPIO_FN(VIO1_HD),
- GPIO_FN(VIO1_VD),
- GPIO_FN(VIO1_CLK),
-
- /* Eth */
- GPIO_FN(RMII_RXD0),
- GPIO_FN(RMII_RXD1),
- GPIO_FN(RMII_TXD0),
- GPIO_FN(RMII_TXD1),
- GPIO_FN(RMII_REF_CLK),
- GPIO_FN(RMII_TX_EN),
- GPIO_FN(RMII_RX_ER),
- GPIO_FN(RMII_CRS_DV),
- GPIO_FN(LNKSTA),
- GPIO_FN(MDIO),
- GPIO_FN(MDC),
-
- /* System */
- GPIO_FN(PDSTATUS),
- GPIO_FN(STATUS2),
- GPIO_FN(STATUS0),
-
- /* VOU */
- GPIO_FN(DV_D15),
- GPIO_FN(DV_D14),
- GPIO_FN(DV_D13),
- GPIO_FN(DV_D12),
- GPIO_FN(DV_D11),
- GPIO_FN(DV_D10),
- GPIO_FN(DV_D9),
- GPIO_FN(DV_D8),
- GPIO_FN(DV_D7),
- GPIO_FN(DV_D6),
- GPIO_FN(DV_D5),
- GPIO_FN(DV_D4),
- GPIO_FN(DV_D3),
- GPIO_FN(DV_D2),
- GPIO_FN(DV_D1),
- GPIO_FN(DV_D0),
- GPIO_FN(DV_CLKI),
- GPIO_FN(DV_CLK),
- GPIO_FN(DV_VSYNC),
- GPIO_FN(DV_HSYNC),
-
- /* MSIOF0 */
- GPIO_FN(MSIOF0_RXD),
- GPIO_FN(MSIOF0_TXD),
- GPIO_FN(MSIOF0_MCK),
- GPIO_FN(MSIOF0_TSCK),
- GPIO_FN(MSIOF0_SS1),
- GPIO_FN(MSIOF0_SS2),
- GPIO_FN(MSIOF0_TSYNC),
- GPIO_FN(MSIOF0_RSCK),
- GPIO_FN(MSIOF0_RSYNC),
-
- /* MSIOF1 */
- GPIO_FN(MSIOF1_RXD),
- GPIO_FN(MSIOF1_TXD),
- GPIO_FN(MSIOF1_MCK),
- GPIO_FN(MSIOF1_TSCK),
- GPIO_FN(MSIOF1_SS1),
- GPIO_FN(MSIOF1_SS2),
- GPIO_FN(MSIOF1_TSYNC),
- GPIO_FN(MSIOF1_RSCK),
- GPIO_FN(MSIOF1_RSYNC),
-
- /* DMAC */
- GPIO_FN(DMAC_DACK0),
- GPIO_FN(DMAC_DREQ0),
- GPIO_FN(DMAC_DACK1),
- GPIO_FN(DMAC_DREQ1),
-
- /* SDHI0 */
- GPIO_FN(SDHI0CD),
- GPIO_FN(SDHI0WP),
- GPIO_FN(SDHI0CMD),
- GPIO_FN(SDHI0CLK),
- GPIO_FN(SDHI0D3),
- GPIO_FN(SDHI0D2),
- GPIO_FN(SDHI0D1),
- GPIO_FN(SDHI0D0),
-
- /* SDHI1 */
- GPIO_FN(SDHI1CD),
- GPIO_FN(SDHI1WP),
- GPIO_FN(SDHI1CMD),
- GPIO_FN(SDHI1CLK),
- GPIO_FN(SDHI1D3),
- GPIO_FN(SDHI1D2),
- GPIO_FN(SDHI1D1),
- GPIO_FN(SDHI1D0),
-
- /* MMC */
- GPIO_FN(MMC_D7),
- GPIO_FN(MMC_D6),
- GPIO_FN(MMC_D5),
- GPIO_FN(MMC_D4),
- GPIO_FN(MMC_D3),
- GPIO_FN(MMC_D2),
- GPIO_FN(MMC_D1),
- GPIO_FN(MMC_D0),
- GPIO_FN(MMC_CLK),
- GPIO_FN(MMC_CMD),
-
- /* IrDA */
- GPIO_FN(IRDA_OUT),
- GPIO_FN(IRDA_IN),
-
- /* TSIF */
- GPIO_FN(TSIF_TS0_SDAT),
- GPIO_FN(TSIF_TS0_SCK),
- GPIO_FN(TSIF_TS0_SDEN),
- GPIO_FN(TSIF_TS0_SPSYNC),
-
- /* IRQ */
- GPIO_FN(INTC_IRQ7),
- GPIO_FN(INTC_IRQ6),
- GPIO_FN(INTC_IRQ5),
- GPIO_FN(INTC_IRQ4),
- GPIO_FN(INTC_IRQ3),
- GPIO_FN(INTC_IRQ2),
- GPIO_FN(INTC_IRQ1),
- GPIO_FN(INTC_IRQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, 0, PTA7_IN,
- PTA6_FN, PTA6_OUT, 0, PTA6_IN,
- PTA5_FN, PTA5_OUT, 0, PTA5_IN,
- PTA4_FN, PTA4_OUT, 0, PTA4_IN,
- PTA3_FN, PTA3_OUT, 0, PTA3_IN,
- PTA2_FN, PTA2_OUT, 0, PTA2_IN,
- PTA1_FN, PTA1_OUT, 0, PTA1_IN,
- PTA0_FN, PTA0_OUT, 0, PTA0_IN ))
- },
- { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, 0, PTB7_IN,
- PTB6_FN, PTB6_OUT, 0, PTB6_IN,
- PTB5_FN, PTB5_OUT, 0, PTB5_IN,
- PTB4_FN, PTB4_OUT, 0, PTB4_IN,
- PTB3_FN, PTB3_OUT, 0, PTB3_IN,
- PTB2_FN, PTB2_OUT, 0, PTB2_IN,
- PTB1_FN, PTB1_OUT, 0, PTB1_IN,
- PTB0_FN, PTB0_OUT, 0, PTB0_IN ))
- },
- { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, 0, PTC7_IN,
- PTC6_FN, PTC6_OUT, 0, PTC6_IN,
- PTC5_FN, PTC5_OUT, 0, PTC5_IN,
- PTC4_FN, PTC4_OUT, 0, PTC4_IN,
- PTC3_FN, PTC3_OUT, 0, PTC3_IN,
- PTC2_FN, PTC2_OUT, 0, PTC2_IN,
- PTC1_FN, PTC1_OUT, 0, PTC1_IN,
- PTC0_FN, PTC0_OUT, 0, PTC0_IN ))
- },
- { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, 0, PTD7_IN,
- PTD6_FN, PTD6_OUT, 0, PTD6_IN,
- PTD5_FN, PTD5_OUT, 0, PTD5_IN,
- PTD4_FN, PTD4_OUT, 0, PTD4_IN,
- PTD3_FN, PTD3_OUT, 0, PTD3_IN,
- PTD2_FN, PTD2_OUT, 0, PTD2_IN,
- PTD1_FN, PTD1_OUT, 0, PTD1_IN,
- PTD0_FN, PTD0_OUT, 0, PTD0_IN ))
- },
- { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, 0, PTE7_IN,
- PTE6_FN, PTE6_OUT, 0, PTE6_IN,
- PTE5_FN, PTE5_OUT, 0, PTE5_IN,
- PTE4_FN, PTE4_OUT, 0, PTE4_IN,
- PTE3_FN, PTE3_OUT, 0, PTE3_IN,
- PTE2_FN, PTE2_OUT, 0, PTE2_IN,
- PTE1_FN, PTE1_OUT, 0, PTE1_IN,
- PTE0_FN, PTE0_OUT, 0, PTE0_IN ))
- },
- { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, 0, PTF7_IN,
- PTF6_FN, PTF6_OUT, 0, PTF6_IN,
- PTF5_FN, PTF5_OUT, 0, PTF5_IN,
- PTF4_FN, PTF4_OUT, 0, PTF4_IN,
- PTF3_FN, PTF3_OUT, 0, PTF3_IN,
- PTF2_FN, PTF2_OUT, 0, PTF2_IN,
- PTF1_FN, PTF1_OUT, 0, PTF1_IN,
- PTF0_FN, PTF0_OUT, 0, PTF0_IN ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xa405010c, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PTG5_FN, PTG5_OUT, 0, 0,
- PTG4_FN, PTG4_OUT, 0, 0,
- PTG3_FN, PTG3_OUT, 0, 0,
- PTG2_FN, PTG2_OUT, 0, 0,
- PTG1_FN, PTG1_OUT, 0, 0,
- PTG0_FN, PTG0_OUT, 0, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, 0, PTH7_IN,
- PTH6_FN, PTH6_OUT, 0, PTH6_IN,
- PTH5_FN, PTH5_OUT, 0, PTH5_IN,
- PTH4_FN, PTH4_OUT, 0, PTH4_IN,
- PTH3_FN, PTH3_OUT, 0, PTH3_IN,
- PTH2_FN, PTH2_OUT, 0, PTH2_IN,
- PTH1_FN, PTH1_OUT, 0, PTH1_IN,
- PTH0_FN, PTH0_OUT, 0, PTH0_IN ))
- },
- { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2, GROUP(
- PTJ7_FN, PTJ7_OUT, 0, 0,
- PTJ6_FN, PTJ6_OUT, 0, 0,
- PTJ5_FN, PTJ5_OUT, 0, 0,
- 0, 0, 0, 0,
- PTJ3_FN, PTJ3_OUT, 0, PTJ3_IN,
- PTJ2_FN, PTJ2_OUT, 0, PTJ2_IN,
- PTJ1_FN, PTJ1_OUT, 0, PTJ1_IN,
- PTJ0_FN, PTJ0_OUT, 0, PTJ0_IN ))
- },
- { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, 0, PTK7_IN,
- PTK6_FN, PTK6_OUT, 0, PTK6_IN,
- PTK5_FN, PTK5_OUT, 0, PTK5_IN,
- PTK4_FN, PTK4_OUT, 0, PTK4_IN,
- PTK3_FN, PTK3_OUT, 0, PTK3_IN,
- PTK2_FN, PTK2_OUT, 0, PTK2_IN,
- PTK1_FN, PTK1_OUT, 0, PTK1_IN,
- PTK0_FN, PTK0_OUT, 0, PTK0_IN ))
- },
- { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2, GROUP(
- PTL7_FN, PTL7_OUT, 0, PTL7_IN,
- PTL6_FN, PTL6_OUT, 0, PTL6_IN,
- PTL5_FN, PTL5_OUT, 0, PTL5_IN,
- PTL4_FN, PTL4_OUT, 0, PTL4_IN,
- PTL3_FN, PTL3_OUT, 0, PTL3_IN,
- PTL2_FN, PTL2_OUT, 0, PTL2_IN,
- PTL1_FN, PTL1_OUT, 0, PTL1_IN,
- PTL0_FN, PTL0_OUT, 0, PTL0_IN ))
- },
- { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, 0, PTM7_IN,
- PTM6_FN, PTM6_OUT, 0, PTM6_IN,
- PTM5_FN, PTM5_OUT, 0, PTM5_IN,
- PTM4_FN, PTM4_OUT, 0, PTM4_IN,
- PTM3_FN, PTM3_OUT, 0, PTM3_IN,
- PTM2_FN, PTM2_OUT, 0, PTM2_IN,
- PTM1_FN, PTM1_OUT, 0, PTM1_IN,
- PTM0_FN, PTM0_OUT, 0, PTM0_IN ))
- },
- { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2, GROUP(
- PTN7_FN, PTN7_OUT, 0, PTN7_IN,
- PTN6_FN, PTN6_OUT, 0, PTN6_IN,
- PTN5_FN, PTN5_OUT, 0, PTN5_IN,
- PTN4_FN, PTN4_OUT, 0, PTN4_IN,
- PTN3_FN, PTN3_OUT, 0, PTN3_IN,
- PTN2_FN, PTN2_OUT, 0, PTN2_IN,
- PTN1_FN, PTN1_OUT, 0, PTN1_IN,
- PTN0_FN, PTN0_OUT, 0, PTN0_IN ))
- },
- { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2, GROUP(
- PTQ7_FN, PTQ7_OUT, 0, PTQ7_IN,
- PTQ6_FN, PTQ6_OUT, 0, PTQ6_IN,
- PTQ5_FN, PTQ5_OUT, 0, PTQ5_IN,
- PTQ4_FN, PTQ4_OUT, 0, PTQ4_IN,
- PTQ3_FN, PTQ3_OUT, 0, PTQ3_IN,
- PTQ2_FN, PTQ2_OUT, 0, PTQ2_IN,
- PTQ1_FN, PTQ1_OUT, 0, PTQ1_IN,
- PTQ0_FN, PTQ0_OUT, 0, PTQ0_IN ))
- },
- { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, 0, PTR7_IN,
- PTR6_FN, PTR6_OUT, 0, PTR6_IN,
- PTR5_FN, PTR5_OUT, 0, PTR5_IN,
- PTR4_FN, PTR4_OUT, 0, PTR4_IN,
- PTR3_FN, 0, 0, PTR3_IN,
- PTR2_FN, 0, 0, PTR2_IN,
- PTR1_FN, PTR1_OUT, 0, PTR1_IN,
- PTR0_FN, PTR0_OUT, 0, PTR0_IN ))
- },
- { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2, GROUP(
- 0, 0, 0, 0,
- PTS6_FN, PTS6_OUT, 0, PTS6_IN,
- PTS5_FN, PTS5_OUT, 0, PTS5_IN,
- PTS4_FN, PTS4_OUT, 0, PTS4_IN,
- PTS3_FN, PTS3_OUT, 0, PTS3_IN,
- PTS2_FN, PTS2_OUT, 0, PTS2_IN,
- PTS1_FN, PTS1_OUT, 0, PTS1_IN,
- PTS0_FN, PTS0_OUT, 0, PTS0_IN ))
- },
- { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, 0, PTT7_IN,
- PTT6_FN, PTT6_OUT, 0, PTT6_IN,
- PTT5_FN, PTT5_OUT, 0, PTT5_IN,
- PTT4_FN, PTT4_OUT, 0, PTT4_IN,
- PTT3_FN, PTT3_OUT, 0, PTT3_IN,
- PTT2_FN, PTT2_OUT, 0, PTT2_IN,
- PTT1_FN, PTT1_OUT, 0, PTT1_IN,
- PTT0_FN, PTT0_OUT, 0, PTT0_IN ))
- },
- { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, 0, PTU7_IN,
- PTU6_FN, PTU6_OUT, 0, PTU6_IN,
- PTU5_FN, PTU5_OUT, 0, PTU5_IN,
- PTU4_FN, PTU4_OUT, 0, PTU4_IN,
- PTU3_FN, PTU3_OUT, 0, PTU3_IN,
- PTU2_FN, PTU2_OUT, 0, PTU2_IN,
- PTU1_FN, PTU1_OUT, 0, PTU1_IN,
- PTU0_FN, PTU0_OUT, 0, PTU0_IN ))
- },
- { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, 0, PTV7_IN,
- PTV6_FN, PTV6_OUT, 0, PTV6_IN,
- PTV5_FN, PTV5_OUT, 0, PTV5_IN,
- PTV4_FN, PTV4_OUT, 0, PTV4_IN,
- PTV3_FN, PTV3_OUT, 0, PTV3_IN,
- PTV2_FN, PTV2_OUT, 0, PTV2_IN,
- PTV1_FN, PTV1_OUT, 0, PTV1_IN,
- PTV0_FN, PTV0_OUT, 0, PTV0_IN ))
- },
- { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, 0, PTW7_IN,
- PTW6_FN, PTW6_OUT, 0, PTW6_IN,
- PTW5_FN, PTW5_OUT, 0, PTW5_IN,
- PTW4_FN, PTW4_OUT, 0, PTW4_IN,
- PTW3_FN, PTW3_OUT, 0, PTW3_IN,
- PTW2_FN, PTW2_OUT, 0, PTW2_IN,
- PTW1_FN, PTW1_OUT, 0, PTW1_IN,
- PTW0_FN, PTW0_OUT, 0, PTW0_IN ))
- },
- { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, 0, PTX7_IN,
- PTX6_FN, PTX6_OUT, 0, PTX6_IN,
- PTX5_FN, PTX5_OUT, 0, PTX5_IN,
- PTX4_FN, PTX4_OUT, 0, PTX4_IN,
- PTX3_FN, PTX3_OUT, 0, PTX3_IN,
- PTX2_FN, PTX2_OUT, 0, PTX2_IN,
- PTX1_FN, PTX1_OUT, 0, PTX1_IN,
- PTX0_FN, PTX0_OUT, 0, PTX0_IN ))
- },
- { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, 0, PTY7_IN,
- PTY6_FN, PTY6_OUT, 0, PTY6_IN,
- PTY5_FN, PTY5_OUT, 0, PTY5_IN,
- PTY4_FN, PTY4_OUT, 0, PTY4_IN,
- PTY3_FN, PTY3_OUT, 0, PTY3_IN,
- PTY2_FN, PTY2_OUT, 0, PTY2_IN,
- PTY1_FN, PTY1_OUT, 0, PTY1_IN,
- PTY0_FN, PTY0_OUT, 0, PTY0_IN ))
- },
- { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, 0, PTZ7_IN,
- PTZ6_FN, PTZ6_OUT, 0, PTZ6_IN,
- PTZ5_FN, PTZ5_OUT, 0, PTZ5_IN,
- PTZ4_FN, PTZ4_OUT, 0, PTZ4_IN,
- PTZ3_FN, PTZ3_OUT, 0, PTZ3_IN,
- PTZ2_FN, PTZ2_OUT, 0, PTZ2_IN,
- PTZ1_FN, PTZ1_OUT, 0, PTZ1_IN,
- PTZ0_FN, PTZ0_OUT, 0, PTZ0_IN ))
- },
- { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1, GROUP(
- PSA15_0, PSA15_1,
- PSA14_0, PSA14_1,
- PSA13_0, PSA13_1,
- PSA12_0, PSA12_1,
- 0, 0,
- PSA10_0, PSA10_1,
- PSA9_0, PSA9_1,
- PSA8_0, PSA8_1,
- PSA7_0, PSA7_1,
- PSA6_0, PSA6_1,
- PSA5_0, PSA5_1,
- 0, 0,
- PSA3_0, PSA3_1,
- PSA2_0, PSA2_1,
- PSA1_0, PSA1_1,
- PSA0_0, PSA0_1))
- },
- { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1, GROUP(
- 0, 0,
- PSB14_0, PSB14_1,
- PSB13_0, PSB13_1,
- PSB12_0, PSB12_1,
- PSB11_0, PSB11_1,
- PSB10_0, PSB10_1,
- PSB9_0, PSB9_1,
- PSB8_0, PSB8_1,
- PSB7_0, PSB7_1,
- PSB6_0, PSB6_1,
- PSB5_0, PSB5_1,
- PSB4_0, PSB4_1,
- PSB3_0, PSB3_1,
- PSB2_0, PSB2_1,
- PSB1_0, PSB1_1,
- PSB0_0, PSB0_1))
- },
- { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1, GROUP(
- PSC15_0, PSC15_1,
- PSC14_0, PSC14_1,
- PSC13_0, PSC13_1,
- PSC12_0, PSC12_1,
- PSC11_0, PSC11_1,
- PSC10_0, PSC10_1,
- PSC9_0, PSC9_1,
- PSC8_0, PSC8_1,
- PSC7_0, PSC7_1,
- PSC6_0, PSC6_1,
- PSC5_0, PSC5_1,
- PSC4_0, PSC4_1,
- 0, 0,
- PSC2_0, PSC2_1,
- PSC1_0, PSC1_1,
- PSC0_0, PSC0_1))
- },
- { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1, GROUP(
- PSD15_0, PSD15_1,
- PSD14_0, PSD14_1,
- PSD13_0, PSD13_1,
- PSD12_0, PSD12_1,
- PSD11_0, PSD11_1,
- PSD10_0, PSD10_1,
- PSD9_0, PSD9_1,
- PSD8_0, PSD8_1,
- PSD7_0, PSD7_1,
- PSD6_0, PSD6_1,
- PSD5_0, PSD5_1,
- PSD4_0, PSD4_1,
- PSD3_0, PSD3_1,
- PSD2_0, PSD2_1,
- PSD1_0, PSD1_1,
- PSD0_0, PSD0_1))
- },
- { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1, GROUP(
- PSE15_0, PSE15_1,
- PSE14_0, PSE14_1,
- PSE13_0, PSE13_1,
- PSE12_0, PSE12_1,
- PSE11_0, PSE11_1,
- PSE10_0, PSE10_1,
- PSE9_0, PSE9_1,
- PSE8_0, PSE8_1,
- PSE7_0, PSE7_1,
- PSE6_0, PSE6_1,
- PSE5_0, PSE5_1,
- PSE4_0, PSE4_1,
- PSE3_0, PSE3_1,
- PSE2_0, PSE2_1,
- PSE1_0, PSE1_1,
- PSE0_0, PSE0_1))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xa4050120, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xa4050122, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xa4050124, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xa4050126, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xa4050128, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xa405012a, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xa405012c, 8, GROUP(
- 0, 0, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xa405012e, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xa4050130, 8, GROUP(
- PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xa4050132, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xa4050134, 8, GROUP(
- PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xa4050136, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xa4050138, 8, GROUP(
- PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xa405013a, 8, GROUP(
- PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xa405013c, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xa405013e, 8, GROUP(
- 0, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xa4050160, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xa4050162, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xa4050164, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xa4050166, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xa4050168, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xa405016a, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xa405016c, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7724_pinmux_info = {
- .name = "sh7724_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7734.c b/drivers/pinctrl/renesas/pfc-sh7734.c
deleted file mode 100644
index 106a500ad13d16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7734.c
+++ /dev/null
@@ -1,2408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7734 processor support - PFC hardware block
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-#include <linux/kernel.h>
-#include <cpu/sh7734.h>
-
-#include "sh_pfc.h"
-
-#define CPU_ALL_GP(fn, sfx) \
- PORT_GP_32(0, fn, sfx), \
- PORT_GP_32(1, fn, sfx), \
- PORT_GP_32(2, fn, sfx), \
- PORT_GP_32(3, fn, sfx), \
- PORT_GP_32(4, fn, sfx), \
- PORT_GP_12(5, fn, sfx)
-
-#undef _GP_DATA
-#define _GP_DATA(bank, pin, name, sfx, cfg) \
- PINMUX_DATA(name##_DATA, name##_FN, name##_IN, name##_OUT)
-
-#define _GP_INOUTSEL(bank, pin, name, sfx, cfg) name##_IN, name##_OUT
-#define _GP_INDT(bank, pin, name, sfx, cfg) name##_DATA
-#define GP_INOUTSEL(bank) PORT_GP_32_REV(bank, _GP_INOUTSEL, unused)
-#define GP_INDT(bank) PORT_GP_32_REV(bank, _GP_INDT, unused)
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- GP_ALL(DATA), /* GP_0_0_DATA -> GP_5_11_DATA */
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- GP_ALL(IN), /* GP_0_0_IN -> GP_5_11_IN */
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- GP_ALL(OUT), /* GP_0_0_OUT -> GP_5_11_OUT */
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- GP_ALL(FN), /* GP_0_0_FN -> GP_5_11_FN */
-
- /* GPSR0 */
- FN_IP1_9_8, FN_IP1_11_10, FN_IP1_13_12, FN_IP1_15_14,
- FN_IP0_7_6, FN_IP0_9_8, FN_IP0_11_10, FN_IP0_13_12,
- FN_IP0_15_14, FN_IP0_17_16, FN_IP0_19_18, FN_IP0_21_20,
- FN_IP0_23_22, FN_IP0_25_24, FN_IP0_27_26, FN_IP0_29_28,
- FN_IP0_31_30, FN_IP1_1_0, FN_IP1_3_2, FN_IP1_5_4,
- FN_IP1_7_6, FN_IP11_28, FN_IP0_1_0, FN_IP0_3_2,
- FN_IP0_5_4, FN_IP1_17_16, FN_IP1_19_18, FN_IP1_22_20,
- FN_IP1_25_23, FN_IP1_28_26, FN_IP1_31_29, FN_IP2_2_0,
-
- /* GPSR1 */
- FN_IP3_20, FN_IP3_29_27, FN_IP11_20_19, FN_IP11_22_21,
- FN_IP2_16_14, FN_IP2_19_17, FN_IP2_22_20, FN_IP2_24_23,
- FN_IP2_27_25, FN_IP2_30_28, FN_IP3_1_0, FN_CLKOUT,
- FN_BS, FN_CS0, FN_IP3_2, FN_EX_CS0,
- FN_IP3_5_3, FN_IP3_8_6, FN_IP3_11_9, FN_IP3_14_12,
- FN_IP3_17_15, FN_RD, FN_IP3_19_18, FN_WE0,
- FN_WE1, FN_IP2_4_3, FN_IP3_23_21, FN_IP3_26_24,
- FN_IP2_7_5, FN_IP2_10_8, FN_IP2_13_11, FN_IP11_25_23,
-
- /* GPSR2 */
- FN_IP11_6_4, FN_IP11_9_7, FN_IP11_11_10, FN_IP4_2_0,
- FN_IP8_29_28, FN_IP11_27_26, FN_IP8_22_20, FN_IP8_25_23,
- FN_IP11_12, FN_IP8_27_26, FN_IP4_5_3, FN_IP4_8_6,
- FN_IP4_11_9, FN_IP4_14_12, FN_IP4_17_15, FN_IP4_19_18,
- FN_IP4_21_20, FN_IP4_23_22, FN_IP4_25_24, FN_IP4_27_26,
- FN_IP4_29_28, FN_IP4_31_30, FN_IP5_2_0, FN_IP5_5_3,
- FN_IP5_8_6, FN_IP5_11_9, FN_IP5_14_12, FN_IP5_17_15,
- FN_IP5_20_18, FN_IP5_22_21, FN_IP5_24_23, FN_IP5_26_25,
-
- /* GPSR3 */
- FN_IP6_2_0, FN_IP6_5_3, FN_IP6_7_6, FN_IP6_9_8,
- FN_IP6_11_10, FN_IP6_13_12, FN_IP6_15_14, FN_IP6_17_16,
- FN_IP6_20_18, FN_IP6_23_21, FN_IP7_2_0, FN_IP7_5_3,
- FN_IP7_8_6, FN_IP7_11_9, FN_IP7_14_12, FN_IP7_17_15,
- FN_IP7_20_18, FN_IP7_23_21, FN_IP7_26_24, FN_IP7_28_27,
- FN_IP7_30_29, FN_IP8_1_0, FN_IP8_3_2, FN_IP8_5_4,
- FN_IP8_7_6, FN_IP8_9_8, FN_IP8_11_10, FN_IP8_13_12,
- FN_IP8_15_14, FN_IP8_17_16, FN_IP8_19_18, FN_IP9_1_0,
-
- /* GPSR4 */
- FN_IP9_19_18, FN_IP9_21_20, FN_IP9_23_22, FN_IP9_25_24,
- FN_IP9_11_10, FN_IP9_13_12, FN_IP9_15_14, FN_IP9_17_16,
- FN_IP9_3_2, FN_IP9_5_4, FN_IP9_7_6, FN_IP9_9_8,
- FN_IP9_27_26, FN_IP9_29_28, FN_IP10_2_0, FN_IP10_5_3,
- FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_15,
- FN_IP10_18_16, FN_IP10_21_19, FN_IP11_0, FN_IP11_1,
- FN_SCL0, FN_IP11_2, FN_PENC0, FN_IP11_15_13, /* Need check*/
- FN_USB_OVC0, FN_IP11_18_16,
- FN_IP10_22, FN_IP10_24_23,
-
- /* GPSR5 */
- FN_IP10_25, FN_IP11_3, FN_IRQ2_B, FN_IRQ3_B,
- FN_IP10_27_26, /* 10 */
- FN_IP10_29_28, /* 11 */
-
- /* IPSR0 */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A, FN_TIOC3D_C,
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C,
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C,
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C,
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C,
-
- /* IPSR1 */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6, FN_FD3_A,
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5, FN_FD2_A,
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4, FN_FD1_A,
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3, FN_FD0_A,
- FN_A25, FN_TX2_D, FN_ST1_D2,
- FN_A24, FN_RX2_D, FN_ST1_D1,
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A,
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A,
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A,
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A,
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C,
-
- /* IPSR2 */
- FN_D14, FN_TX2_B, FN_FSE_A, FN_ET0_TX_CLK_B,
- FN_D13, FN_RX2_B, FN_FRB_A, FN_ET0_ETXD6_B,
- FN_D12, FN_FWE_A, FN_ET0_ETXD5_B,
- FN_D11, FN_RSPI_MISO_A, FN_QMI_QIO1_A, FN_FRE_A,
- FN_ET0_ETXD3_B,
- FN_D10, FN_RSPI_MOSI_A, FN_QMO_QIO0_A, FN_FALE_A,
- FN_ET0_ETXD2_B,
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A, FN_FCLE_A,
- FN_ET0_ETXD1_B,
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A, FN_FCE_A,
- FN_ET0_GTX_CLK_B,
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A, FN_FD7_A,
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A, FN_FD6_A,
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7, FN_FD4_A,
-
- /* IPSR3 */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A, FN_ET0_ETXD7,
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A,
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A,
- FN_EX_WAIT0, FN_TCLK1_B,
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B, FN_ET0_ETXD3_A,
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B, FN_ET0_ETXD2_A,
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B, FN_ET0_ETXD1_A,
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B, FN_ET0_GTX_CLK_A,
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B, FN_ET0_ETXD0,
- FN_CS1_A26, FN_QIO3_B,
- FN_D15, FN_SCK2_B,
-
- /* IPSR4 */
- FN_SCK2_A, FN_VI0_G3,
- FN_RTS1_B, FN_VI0_G2,
- FN_CTS1_B, FN_VI0_DATA7_VI0_G1,
- FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A, FN_ET0_MDC,
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A, FN_ET0_COL,
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A, FN_ET0_CRS,
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A, FN_ET0_RX_ER,
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A, FN_ET0_RX_DV,
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A, FN_ET0_ERXD7,
-
- /* IPSR5 */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, FN_ET0_RX_CLK_B,
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, FN_ET0_ERXD2_B,
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, FN_ET0_ERXD3_B,
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, FN_ET0_MDIO_B,
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, FN_ET0_LINK_B,
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, FN_ET0_MAGIC_B,
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, FN_ET0_PHY_INT_B,
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5,
- FN_REF125CK, FN_ADTRG, FN_RX5_C,
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D,
-
- /* IPSR6 */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A, FN_TCLKA_A, FN_HIFD00,
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A, FN_TCLKB_A, FN_HIFD01,
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A, FN_TIOC1A_A, FN_HIFD08,
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A, FN_HIFD09,
-
- /* IPSR7 */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A, FN_HIFD10,
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A, FN_HIFD11,
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A, FN_HIFD12,
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A, FN_HIFD13,
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A, FN_HIFD14,
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A, FN_HIFD15,
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A, FN_HIFCS,
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A, FN_HIFRS,
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A, FN_HIFWR,
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- FN_DU0_DB4, FN_HIFINT,
-
- /* IPSR8 */
- FN_DU0_DB5, FN_HIFDREQ,
- FN_DU0_DB6, FN_HIFRDY,
- FN_DU0_DB7, FN_SSI_SCK0_B, FN_HIFEBL_B,
- FN_DU0_DOTCLKIN, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- FN_DU0_DOTCLKOUT, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- FN_DU0_EXHSYNC_DU0_HSYNC, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- FN_DU0_EXVSYNC_DU0_VSYNC, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B, FN_SSI_SDATA1_B,
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- FN_IRQ0_A, FN_HSPI_TX_B, FN_RX3_E, FN_ET0_ERXD0,
- FN_IRQ1_A, FN_HSPI_RX_B, FN_TX3_E, FN_ET0_ERXD1,
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
-
- /* IPSR9 */
- FN_VI1_CLK_A, FN_FD0_B, FN_LCD_DATA0_B,
- FN_VI1_0_A, FN_FD1_B, FN_LCD_DATA1_B,
- FN_VI1_1_A, FN_FD2_B, FN_LCD_DATA2_B,
- FN_VI1_2_A, FN_FD3_B, FN_LCD_DATA3_B,
- FN_VI1_3_A, FN_FD4_B, FN_LCD_DATA4_B,
- FN_VI1_4_A, FN_FD5_B, FN_LCD_DATA5_B,
- FN_VI1_5_A, FN_FD6_B, FN_LCD_DATA6_B,
- FN_VI1_6_A, FN_FD7_B, FN_LCD_DATA7_B,
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B,
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B,
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B,
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B,
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B,
-
- /* IPSR10 */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B, FN_LCD_DATA15_B,
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B, FN_LCD_DON_B,
- FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B, FN_LCD_CL1_B,
- FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B, FN_LCD_CL2_B,
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B, FN_LCD_FLM_B,
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B, FN_LCD_VEPWC_B,
- FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B, FN_LCD_M_DISP_B,
- FN_CAN_CLK_A, FN_RX4_D,
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK,
- FN_CAN1_RX_A, FN_IRQ1_B,
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG,
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT,
-
- /* IPSR11 */
- FN_SCL1, FN_SCIF_CLK_C,
- FN_SDA1, FN_RX1_E,
- FN_SDA0, FN_HIFEBL_A,
- FN_SDSELF, FN_RTS1_E,
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A, FN_ET0_ERXD4,
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A, FN_ET0_ERXD5,
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- FN_TX0_A, FN_HSPI_TX_A,
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D, FN_IETX_B,
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D, FN_IERX_B,
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN,
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER,
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C, FN_ET0_TX_CLK_A,
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- FN_PRESETOUT, FN_ST_CLKOUT,
-
- /* MOD_SEL1 */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2,
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2,
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2,
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- FN_SEL_INTC_0, FN_SEL_INTC_1,
-
- /* MOD_SEL2 */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2,
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2,
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1,
- FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1,
- FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2,
- FN_SEL_SCIF3_3, FN_SEL_SCIF3_4,
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
- FN_SEL_SCIF2_3,
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2,
- FN_SEL_SCIF1_3, FN_SEL_SCIF1_4,
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2,
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2,
-
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- CLKOUT_MARK, BS_MARK, CS0_MARK, EX_CS0_MARK, RD_MARK,
- WE0_MARK, WE1_MARK,
-
- SCL0_MARK, PENC0_MARK, USB_OVC0_MARK,
-
- IRQ2_B_MARK, IRQ3_B_MARK,
-
- /* IPSR0 */
- A15_MARK, ST0_VCO_CLKIN_MARK, LCD_DATA15_A_MARK, TIOC3D_C_MARK,
- A14_MARK, LCD_DATA14_A_MARK, TIOC3C_C_MARK,
- A13_MARK, LCD_DATA13_A_MARK, TIOC3B_C_MARK,
- A12_MARK, LCD_DATA12_A_MARK, TIOC3A_C_MARK,
- A11_MARK, ST0_D7_MARK, LCD_DATA11_A_MARK, TIOC2B_C_MARK,
- A10_MARK, ST0_D6_MARK, LCD_DATA10_A_MARK, TIOC2A_C_MARK,
- A9_MARK, ST0_D5_MARK, LCD_DATA9_A_MARK, TIOC1B_C_MARK,
- A8_MARK, ST0_D4_MARK, LCD_DATA8_A_MARK, TIOC1A_C_MARK,
- A7_MARK, ST0_D3_MARK, LCD_DATA7_A_MARK, TIOC0D_C_MARK,
- A6_MARK, ST0_D2_MARK, LCD_DATA6_A_MARK, TIOC0C_C_MARK,
- A5_MARK, ST0_D1_MARK, LCD_DATA5_A_MARK, TIOC0B_C_MARK,
- A4_MARK, ST0_D0_MARK, LCD_DATA4_A_MARK, TIOC0A_C_MARK,
- A3_MARK, ST0_VLD_MARK, LCD_DATA3_A_MARK, TCLKD_C_MARK,
- A2_MARK, ST0_SYC_MARK, LCD_DATA2_A_MARK, TCLKC_C_MARK,
- A1_MARK, ST0_REQ_MARK, LCD_DATA1_A_MARK, TCLKB_C_MARK,
- A0_MARK, ST0_CLKIN_MARK, LCD_DATA0_A_MARK, TCLKA_C_MARK,
-
- /* IPSR1 */
- D3_MARK, SD0_DAT3_A_MARK, MMC_D3_A_MARK, ST1_D6_MARK, FD3_A_MARK,
- D2_MARK, SD0_DAT2_A_MARK, MMC_D2_A_MARK, ST1_D5_MARK, FD2_A_MARK,
- D1_MARK, SD0_DAT1_A_MARK, MMC_D1_A_MARK, ST1_D4_MARK, FD1_A_MARK,
- D0_MARK, SD0_DAT0_A_MARK, MMC_D0_A_MARK, ST1_D3_MARK, FD0_A_MARK,
- A25_MARK, TX2_D_MARK, ST1_D2_MARK,
- A24_MARK, RX2_D_MARK, ST1_D1_MARK,
- A23_MARK, ST1_D0_MARK, LCD_M_DISP_A_MARK,
- A22_MARK, ST1_VLD_MARK, LCD_VEPWC_A_MARK,
- A21_MARK, ST1_SYC_MARK, LCD_VCPWC_A_MARK,
- A20_MARK, ST1_REQ_MARK, LCD_FLM_A_MARK,
- A19_MARK, ST1_CLKIN_MARK, LCD_CLK_A_MARK, TIOC4D_C_MARK,
- A18_MARK, ST1_PWM_MARK, LCD_CL2_A_MARK, TIOC4C_C_MARK,
- A17_MARK, ST1_VCO_CLKIN_MARK, LCD_CL1_A_MARK, TIOC4B_C_MARK,
- A16_MARK, ST0_PWM_MARK, LCD_DON_A_MARK, TIOC4A_C_MARK,
-
- /* IPSR2 */
- D14_MARK, TX2_B_MARK, FSE_A_MARK, ET0_TX_CLK_B_MARK,
- D13_MARK, RX2_B_MARK, FRB_A_MARK, ET0_ETXD6_B_MARK,
- D12_MARK, FWE_A_MARK, ET0_ETXD5_B_MARK,
- D11_MARK, RSPI_MISO_A_MARK, QMI_QIO1_A_MARK, FRE_A_MARK,
- ET0_ETXD3_B_MARK,
- D10_MARK, RSPI_MOSI_A_MARK, QMO_QIO0_A_MARK, FALE_A_MARK,
- ET0_ETXD2_B_MARK,
- D9_MARK, SD0_CMD_A_MARK, MMC_CMD_A_MARK, QIO3_A_MARK,
- FCLE_A_MARK, ET0_ETXD1_B_MARK,
- D8_MARK, SD0_CLK_A_MARK, MMC_CLK_A_MARK, QIO2_A_MARK,
- FCE_A_MARK, ET0_GTX_CLK_B_MARK,
- D7_MARK, RSPI_SSL_A_MARK, MMC_D7_A_MARK, QSSL_A_MARK,
- FD7_A_MARK,
- D6_MARK, RSPI_RSPCK_A_MARK, MMC_D6_A_MARK, QSPCLK_A_MARK,
- FD6_A_MARK,
- D5_MARK, SD0_WP_A_MARK, MMC_D5_A_MARK, FD5_A_MARK,
- D4_MARK, SD0_CD_A_MARK, MMC_D4_A_MARK, ST1_D7_MARK,
- FD4_A_MARK,
-
- /* IPSR3 */
- DRACK0_MARK, SD1_DAT2_A_MARK, ATAG_MARK, TCLK1_A_MARK, ET0_ETXD7_MARK,
- EX_WAIT2_MARK, SD1_DAT1_A_MARK, DACK2_MARK, CAN1_RX_C_MARK,
- ET0_MAGIC_C_MARK, ET0_ETXD6_A_MARK,
- EX_WAIT1_MARK, SD1_DAT0_A_MARK, DREQ2_MARK, CAN1_TX_C_MARK,
- ET0_LINK_C_MARK, ET0_ETXD5_A_MARK,
- EX_WAIT0_MARK, TCLK1_B_MARK,
- RD_WR_MARK, TCLK0_MARK, CAN_CLK_B_MARK, ET0_ETXD4_MARK,
- EX_CS5_MARK, SD1_CMD_A_MARK, ATADIR_MARK, QSSL_B_MARK,
- ET0_ETXD3_A_MARK,
- EX_CS4_MARK, SD1_WP_A_MARK, ATAWR_MARK, QMI_QIO1_B_MARK,
- ET0_ETXD2_A_MARK,
- EX_CS3_MARK, SD1_CD_A_MARK, ATARD_MARK, QMO_QIO0_B_MARK,
- ET0_ETXD1_A_MARK,
- EX_CS2_MARK, TX3_B_MARK, ATACS1_MARK, QSPCLK_B_MARK,
- ET0_GTX_CLK_A_MARK,
- EX_CS1_MARK, RX3_B_MARK, ATACS0_MARK, QIO2_B_MARK,
- ET0_ETXD0_MARK,
- CS1_A26_MARK, QIO3_B_MARK,
- D15_MARK, SCK2_B_MARK,
-
- /* IPSR4 */
- SCK2_A_MARK, VI0_G3_MARK,
- RTS1_B_MARK, VI0_G2_MARK,
- CTS1_B_MARK, VI0_DATA7_VI0_G1_MARK,
- TX1_B_MARK, VI0_DATA6_VI0_G0_MARK, ET0_PHY_INT_A_MARK,
- RX1_B_MARK, VI0_DATA5_VI0_B5_MARK, ET0_MAGIC_A_MARK,
- SCK1_B_MARK, VI0_DATA4_VI0_B4_MARK, ET0_LINK_A_MARK,
- RTS0_B_MARK, VI0_DATA3_VI0_B3_MARK, ET0_MDIO_A_MARK,
- CTS0_B_MARK, VI0_DATA2_VI0_B2_MARK, RMII0_MDIO_A_MARK,
- ET0_MDC_MARK,
- HTX0_A_MARK, TX1_A_MARK, VI0_DATA1_VI0_B1_MARK,
- RMII0_MDC_A_MARK, ET0_COL_MARK,
- HRX0_A_MARK, RX1_A_MARK, VI0_DATA0_VI0_B0_MARK,
- RMII0_CRS_DV_A_MARK, ET0_CRS_MARK,
- HSCK0_A_MARK, SCK1_A_MARK, VI0_VSYNC_MARK,
- RMII0_RX_ER_A_MARK, ET0_RX_ER_MARK,
- HRTS0_A_MARK, RTS1_A_MARK, VI0_HSYNC_MARK,
- RMII0_TXD_EN_A_MARK, ET0_RX_DV_MARK,
- HCTS0_A_MARK, CTS1_A_MARK, VI0_FIELD_MARK,
- RMII0_RXD1_A_MARK, ET0_ERXD7_MARK,
-
- /* IPSR5 */
- SD2_CLK_A_MARK, RX2_A_MARK, VI0_G4_MARK, ET0_RX_CLK_B_MARK,
- SD2_CMD_A_MARK, TX2_A_MARK, VI0_G5_MARK, ET0_ERXD2_B_MARK,
- SD2_DAT0_A_MARK, RX3_A_MARK, VI0_R0_MARK, ET0_ERXD3_B_MARK,
- SD2_DAT1_A_MARK, TX3_A_MARK, VI0_R1_MARK, ET0_MDIO_B_MARK,
- SD2_DAT2_A_MARK, RX4_A_MARK, VI0_R2_MARK, ET0_LINK_B_MARK,
- SD2_DAT3_A_MARK, TX4_A_MARK, VI0_R3_MARK, ET0_MAGIC_B_MARK,
- SD2_CD_A_MARK, RX5_A_MARK, VI0_R4_MARK, ET0_PHY_INT_B_MARK,
- SD2_WP_A_MARK, TX5_A_MARK, VI0_R5_MARK,
- REF125CK_MARK, ADTRG_MARK, RX5_C_MARK,
- REF50CK_MARK, CTS1_E_MARK, HCTS0_D_MARK,
-
- /* IPSR6 */
- DU0_DR0_MARK, SCIF_CLK_B_MARK, HRX0_D_MARK, IETX_A_MARK,
- TCLKA_A_MARK, HIFD00_MARK,
- DU0_DR1_MARK, SCK0_B_MARK, HTX0_D_MARK, IERX_A_MARK,
- TCLKB_A_MARK, HIFD01_MARK,
- DU0_DR2_MARK, RX0_B_MARK, TCLKC_A_MARK, HIFD02_MARK,
- DU0_DR3_MARK, TX0_B_MARK, TCLKD_A_MARK, HIFD03_MARK,
- DU0_DR4_MARK, CTS0_C_MARK, TIOC0A_A_MARK, HIFD04_MARK,
- DU0_DR5_MARK, RTS0_C_MARK, TIOC0B_A_MARK, HIFD05_MARK,
- DU0_DR6_MARK, SCK1_C_MARK, TIOC0C_A_MARK, HIFD06_MARK,
- DU0_DR7_MARK, RX1_C_MARK, TIOC0D_A_MARK, HIFD07_MARK,
- DU0_DG0_MARK, TX1_C_MARK, HSCK0_D_MARK, IECLK_A_MARK,
- TIOC1A_A_MARK, HIFD08_MARK,
- DU0_DG1_MARK, CTS1_C_MARK, HRTS0_D_MARK, TIOC1B_A_MARK,
- HIFD09_MARK,
-
- /* IPSR7 */
- DU0_DG2_MARK, RTS1_C_MARK, RMII0_MDC_B_MARK, TIOC2A_A_MARK,
- HIFD10_MARK,
- DU0_DG3_MARK, SCK2_C_MARK, RMII0_MDIO_B_MARK, TIOC2B_A_MARK,
- HIFD11_MARK,
- DU0_DG4_MARK, RX2_C_MARK, RMII0_CRS_DV_B_MARK, TIOC3A_A_MARK,
- HIFD12_MARK,
- DU0_DG5_MARK, TX2_C_MARK, RMII0_RX_ER_B_MARK, TIOC3B_A_MARK,
- HIFD13_MARK,
- DU0_DG6_MARK, RX3_C_MARK, RMII0_RXD0_B_MARK, TIOC3C_A_MARK,
- HIFD14_MARK,
- DU0_DG7_MARK, TX3_C_MARK, RMII0_RXD1_B_MARK, TIOC3D_A_MARK,
- HIFD15_MARK,
- DU0_DB0_MARK, RX4_C_MARK, RMII0_TXD_EN_B_MARK, TIOC4A_A_MARK,
- HIFCS_MARK,
- DU0_DB1_MARK, TX4_C_MARK, RMII0_TXD0_B_MARK, TIOC4B_A_MARK,
- HIFRS_MARK,
- DU0_DB2_MARK, RX5_B_MARK, RMII0_TXD1_B_MARK, TIOC4C_A_MARK,
- HIFWR_MARK,
- DU0_DB3_MARK, TX5_B_MARK, TIOC4D_A_MARK, HIFRD_MARK,
- DU0_DB4_MARK, HIFINT_MARK,
-
- /* IPSR8 */
- DU0_DB5_MARK, HIFDREQ_MARK,
- DU0_DB6_MARK, HIFRDY_MARK,
- DU0_DB7_MARK, SSI_SCK0_B_MARK, HIFEBL_B_MARK,
- DU0_DOTCLKIN_MARK, HSPI_CS0_C_MARK, SSI_WS0_B_MARK,
- DU0_DOTCLKOUT_MARK, HSPI_CLK0_C_MARK, SSI_SDATA0_B_MARK,
- DU0_EXHSYNC_DU0_HSYNC_MARK, HSPI_TX0_C_MARK, SSI_SCK1_B_MARK,
- DU0_EXVSYNC_DU0_VSYNC_MARK, HSPI_RX0_C_MARK, SSI_WS1_B_MARK,
- DU0_EXODDF_DU0_ODDF_MARK, CAN0_RX_B_MARK, HSCK0_B_MARK,
- SSI_SDATA1_B_MARK,
- DU0_DISP_MARK, CAN0_TX_B_MARK, HRX0_B_MARK, AUDIO_CLKA_B_MARK,
- DU0_CDE_MARK, HTX0_B_MARK, AUDIO_CLKB_B_MARK, LCD_VCPWC_B_MARK,
- IRQ0_A_MARK, HSPI_TX_B_MARK, RX3_E_MARK, ET0_ERXD0_MARK,
- IRQ1_A_MARK, HSPI_RX_B_MARK, TX3_E_MARK, ET0_ERXD1_MARK,
- IRQ2_A_MARK, CTS0_A_MARK, HCTS0_B_MARK, ET0_ERXD2_A_MARK,
- IRQ3_A_MARK, RTS0_A_MARK, HRTS0_B_MARK, ET0_ERXD3_A_MARK,
-
- /* IPSR9 */
- VI1_CLK_A_MARK, FD0_B_MARK, LCD_DATA0_B_MARK,
- VI1_0_A_MARK, FD1_B_MARK, LCD_DATA1_B_MARK,
- VI1_1_A_MARK, FD2_B_MARK, LCD_DATA2_B_MARK,
- VI1_2_A_MARK, FD3_B_MARK, LCD_DATA3_B_MARK,
- VI1_3_A_MARK, FD4_B_MARK, LCD_DATA4_B_MARK,
- VI1_4_A_MARK, FD5_B_MARK, LCD_DATA5_B_MARK,
- VI1_5_A_MARK, FD6_B_MARK, LCD_DATA6_B_MARK,
- VI1_6_A_MARK, FD7_B_MARK, LCD_DATA7_B_MARK,
- VI1_7_A_MARK, FCE_B_MARK, LCD_DATA8_B_MARK,
- SSI_SCK0_A_MARK, TIOC1A_B_MARK, LCD_DATA9_B_MARK,
- SSI_WS0_A_MARK, TIOC1B_B_MARK, LCD_DATA10_B_MARK,
- SSI_SDATA0_A_MARK, VI1_0_B_MARK, TIOC2A_B_MARK, LCD_DATA11_B_MARK,
- SSI_SCK1_A_MARK, VI1_1_B_MARK, TIOC2B_B_MARK, LCD_DATA12_B_MARK,
- SSI_WS1_A_MARK, VI1_2_B_MARK, LCD_DATA13_B_MARK,
- SSI_SDATA1_A_MARK, VI1_3_B_MARK, LCD_DATA14_B_MARK,
-
- /* IPSR10 */
- SSI_SCK23_MARK, VI1_4_B_MARK, RX1_D_MARK, FCLE_B_MARK,
- LCD_DATA15_B_MARK,
- SSI_WS23_MARK, VI1_5_B_MARK, TX1_D_MARK, HSCK0_C_MARK,
- FALE_B_MARK, LCD_DON_B_MARK,
- SSI_SDATA2_MARK, VI1_6_B_MARK, HRX0_C_MARK, FRE_B_MARK,
- LCD_CL1_B_MARK,
- SSI_SDATA3_MARK, VI1_7_B_MARK, HTX0_C_MARK, FWE_B_MARK,
- LCD_CL2_B_MARK,
- AUDIO_CLKA_A_MARK, VI1_CLK_B_MARK, SCK1_D_MARK, IECLK_B_MARK,
- LCD_FLM_B_MARK,
- AUDIO_CLKB_A_MARK, LCD_CLK_B_MARK,
- AUDIO_CLKC_MARK, SCK1_E_MARK, HCTS0_C_MARK, FRB_B_MARK,
- LCD_VEPWC_B_MARK,
- AUDIO_CLKOUT_MARK, TX1_E_MARK, HRTS0_C_MARK, FSE_B_MARK,
- LCD_M_DISP_B_MARK,
- CAN_CLK_A_MARK, RX4_D_MARK,
- CAN0_TX_A_MARK, TX4_D_MARK, MLB_CLK_MARK,
- CAN1_RX_A_MARK, IRQ1_B_MARK,
- CAN0_RX_A_MARK, IRQ0_B_MARK, MLB_SIG_MARK,
- CAN1_TX_A_MARK, TX5_C_MARK, MLB_DAT_MARK,
-
- /* IPSR11 */
- SCL1_MARK, SCIF_CLK_C_MARK,
- SDA1_MARK, RX1_E_MARK,
- SDA0_MARK, HIFEBL_A_MARK,
- SDSELF_MARK, RTS1_E_MARK,
- SCIF_CLK_A_MARK, HSPI_CLK_A_MARK, VI0_CLK_MARK, RMII0_TXD0_A_MARK,
- ET0_ERXD4_MARK,
- SCK0_A_MARK, HSPI_CS_A_MARK, VI0_CLKENB_MARK, RMII0_TXD1_A_MARK,
- ET0_ERXD5_MARK,
- RX0_A_MARK, HSPI_RX_A_MARK, RMII0_RXD0_A_MARK, ET0_ERXD6_MARK,
- TX0_A_MARK, HSPI_TX_A_MARK,
- PENC1_MARK, TX3_D_MARK, CAN1_TX_B_MARK, TX5_D_MARK,
- IETX_B_MARK,
- USB_OVC1_MARK, RX3_D_MARK, CAN1_RX_B_MARK, RX5_D_MARK,
- IERX_B_MARK,
- DREQ0_MARK, SD1_CLK_A_MARK, ET0_TX_EN_MARK,
- DACK0_MARK, SD1_DAT3_A_MARK, ET0_TX_ER_MARK,
- DREQ1_MARK, HSPI_CLK_B_MARK, RX4_B_MARK, ET0_PHY_INT_C_MARK,
- ET0_TX_CLK_A_MARK,
- DACK1_MARK, HSPI_CS_B_MARK, TX4_B_MARK, ET0_RX_CLK_A_MARK,
- PRESETOUT_MARK, ST_CLKOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
-
- PINMUX_SINGLE(CLKOUT),
- PINMUX_SINGLE(BS),
- PINMUX_SINGLE(CS0),
- PINMUX_SINGLE(EX_CS0),
- PINMUX_SINGLE(RD),
- PINMUX_SINGLE(WE0),
- PINMUX_SINGLE(WE1),
- PINMUX_SINGLE(SCL0),
- PINMUX_SINGLE(PENC0),
- PINMUX_SINGLE(USB_OVC0),
- PINMUX_SINGLE(IRQ2_B),
- PINMUX_SINGLE(IRQ3_B),
-
- /* IPSR0 */
- PINMUX_IPSR_GPSR(IP0_1_0, A0),
- PINMUX_IPSR_GPSR(IP0_1_0, ST0_CLKIN),
- PINMUX_IPSR_MSEL(IP0_1_0, LCD_DATA0_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_1_0, TCLKA_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_3_2, A1),
- PINMUX_IPSR_GPSR(IP0_3_2, ST0_REQ),
- PINMUX_IPSR_MSEL(IP0_3_2, LCD_DATA1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_3_2, TCLKB_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_5_4, A2),
- PINMUX_IPSR_GPSR(IP0_5_4, ST0_SYC),
- PINMUX_IPSR_MSEL(IP0_5_4, LCD_DATA2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_5_4, TCLKC_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_7_6, A3),
- PINMUX_IPSR_GPSR(IP0_7_6, ST0_VLD),
- PINMUX_IPSR_MSEL(IP0_7_6, LCD_DATA3_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_7_6, TCLKD_C, SEL_MTU2_CLK_1),
-
- PINMUX_IPSR_GPSR(IP0_9_8, A4),
- PINMUX_IPSR_GPSR(IP0_9_8, ST0_D0),
- PINMUX_IPSR_MSEL(IP0_9_8, LCD_DATA4_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_9_8, TIOC0A_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_11_10, A5),
- PINMUX_IPSR_GPSR(IP0_11_10, ST0_D1),
- PINMUX_IPSR_MSEL(IP0_11_10, LCD_DATA5_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_11_10, TIOC0B_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_13_12, A6),
- PINMUX_IPSR_GPSR(IP0_13_12, ST0_D2),
- PINMUX_IPSR_MSEL(IP0_13_12, LCD_DATA6_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_13_12, TIOC0C_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_15_14, A7),
- PINMUX_IPSR_GPSR(IP0_15_14, ST0_D3),
- PINMUX_IPSR_MSEL(IP0_15_14, LCD_DATA7_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_15_14, TIOC0D_C, SEL_MTU2_CH0_1),
-
- PINMUX_IPSR_GPSR(IP0_17_16, A8),
- PINMUX_IPSR_GPSR(IP0_17_16, ST0_D4),
- PINMUX_IPSR_MSEL(IP0_17_16, LCD_DATA8_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_17_16, TIOC1A_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_19_18, A9),
- PINMUX_IPSR_GPSR(IP0_19_18, ST0_D5),
- PINMUX_IPSR_MSEL(IP0_19_18, LCD_DATA9_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_19_18, TIOC1B_C, SEL_MTU2_CH1_2),
-
- PINMUX_IPSR_GPSR(IP0_21_20, A10),
- PINMUX_IPSR_GPSR(IP0_21_20, ST0_D6),
- PINMUX_IPSR_MSEL(IP0_21_20, LCD_DATA10_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_21_20, TIOC2A_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_23_22, A11),
- PINMUX_IPSR_GPSR(IP0_23_22, ST0_D7),
- PINMUX_IPSR_MSEL(IP0_23_22, LCD_DATA11_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_23_22, TIOC2B_C, SEL_MTU2_CH2_2),
-
- PINMUX_IPSR_GPSR(IP0_25_24, A12),
- PINMUX_IPSR_MSEL(IP0_25_24, LCD_DATA12_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_25_24, TIOC3A_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_27_26, A13),
- PINMUX_IPSR_MSEL(IP0_27_26, LCD_DATA13_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_27_26, TIOC3B_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_29_28, A14),
- PINMUX_IPSR_MSEL(IP0_29_28, LCD_DATA14_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_29_28, TIOC3C_C, SEL_MTU2_CH3_1),
-
- PINMUX_IPSR_GPSR(IP0_31_30, A15),
- PINMUX_IPSR_GPSR(IP0_31_30, ST0_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP0_31_30, LCD_DATA15_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP0_31_30, TIOC3D_C, SEL_MTU2_CH3_1),
-
-
- /* IPSR1 */
- PINMUX_IPSR_GPSR(IP1_1_0, A16),
- PINMUX_IPSR_GPSR(IP1_1_0, ST0_PWM),
- PINMUX_IPSR_MSEL(IP1_1_0, LCD_DON_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_1_0, TIOC4A_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_3_2, A17),
- PINMUX_IPSR_GPSR(IP1_3_2, ST1_VCO_CLKIN),
- PINMUX_IPSR_MSEL(IP1_3_2, LCD_CL1_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_3_2, TIOC4B_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_5_4, A18),
- PINMUX_IPSR_GPSR(IP1_5_4, ST1_PWM),
- PINMUX_IPSR_MSEL(IP1_5_4, LCD_CL2_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_5_4, TIOC4C_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_7_6, A19),
- PINMUX_IPSR_GPSR(IP1_7_6, ST1_CLKIN),
- PINMUX_IPSR_MSEL(IP1_7_6, LCD_CLK_A, SEL_LCDC_0),
- PINMUX_IPSR_MSEL(IP1_7_6, TIOC4D_C, SEL_MTU2_CH4_1),
-
- PINMUX_IPSR_GPSR(IP1_9_8, A20),
- PINMUX_IPSR_GPSR(IP1_9_8, ST1_REQ),
- PINMUX_IPSR_MSEL(IP1_9_8, LCD_FLM_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_11_10, A21),
- PINMUX_IPSR_GPSR(IP1_11_10, ST1_SYC),
- PINMUX_IPSR_MSEL(IP1_11_10, LCD_VCPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_13_12, A22),
- PINMUX_IPSR_GPSR(IP1_13_12, ST1_VLD),
- PINMUX_IPSR_MSEL(IP1_13_12, LCD_VEPWC_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_15_14, A23),
- PINMUX_IPSR_GPSR(IP1_15_14, ST1_D0),
- PINMUX_IPSR_MSEL(IP1_15_14, LCD_M_DISP_A, SEL_LCDC_0),
-
- PINMUX_IPSR_GPSR(IP1_17_16, A24),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D1),
-
- PINMUX_IPSR_GPSR(IP1_19_18, A25),
- PINMUX_IPSR_MSEL(IP1_17_16, RX2_D, SEL_SCIF2_3),
- PINMUX_IPSR_GPSR(IP1_17_16, ST1_D2),
-
- PINMUX_IPSR_GPSR(IP1_22_20, D0),
- PINMUX_IPSR_MSEL(IP1_22_20, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_22_20, MMC_D0_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_22_20, ST1_D3),
- PINMUX_IPSR_MSEL(IP1_22_20, FD0_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_25_23, D1),
- PINMUX_IPSR_MSEL(IP1_25_23, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_25_23, MMC_D1_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_25_23, ST1_D4),
- PINMUX_IPSR_MSEL(IP1_25_23, FD1_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_28_26, D2),
- PINMUX_IPSR_MSEL(IP1_28_26, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_28_26, MMC_D2_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_28_26, ST1_D5),
- PINMUX_IPSR_MSEL(IP1_28_26, FD2_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP1_31_29, D3),
- PINMUX_IPSR_MSEL(IP1_31_29, SD0_DAT0_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP1_31_29, MMC_D3_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP1_31_29, ST1_D6),
- PINMUX_IPSR_MSEL(IP1_31_29, FD3_A, SEL_FLCTL_0),
-
- /* IPSR2 */
- PINMUX_IPSR_GPSR(IP2_2_0, D4),
- PINMUX_IPSR_MSEL(IP2_2_0, SD0_CD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_2_0, MMC_D4_A, SEL_MMC_0),
- PINMUX_IPSR_GPSR(IP2_2_0, ST1_D7),
- PINMUX_IPSR_MSEL(IP2_2_0, FD4_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_4_3, D5),
- PINMUX_IPSR_MSEL(IP2_4_3, SD0_WP_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_4_3, MMC_D5_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_4_3, FD5_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_7_5, D6),
- PINMUX_IPSR_MSEL(IP2_7_5, RSPI_RSPCK_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, MMC_D6_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_7_5, QSPCLK_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_7_5, FD6_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_10_8, D7),
- PINMUX_IPSR_MSEL(IP2_10_8, RSPI_SSL_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, MMC_D7_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_10_8, QSSL_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_10_8, FD7_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_13_11, D8),
- PINMUX_IPSR_MSEL(IP2_13_11, SD0_CLK_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_13_11, MMC_CLK_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_13_11, QIO2_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_13_11, FCE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_13_11, ET0_GTX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_16_14, D9),
- PINMUX_IPSR_MSEL(IP2_16_14, SD0_CMD_A, SEL_SDHI0_0),
- PINMUX_IPSR_MSEL(IP2_16_14, MMC_CMD_A, SEL_MMC_0),
- PINMUX_IPSR_MSEL(IP2_16_14, QIO3_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_16_14, FCLE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_16_14, ET0_ETXD1_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_19_17, D10),
- PINMUX_IPSR_MSEL(IP2_19_17, RSPI_MOSI_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, QMO_QIO0_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_19_17, FALE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_19_17, ET0_ETXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_22_20, D11),
- PINMUX_IPSR_MSEL(IP2_22_20, RSPI_MISO_A, SEL_RSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, QMI_QIO1_A, SEL_RQSPI_0),
- PINMUX_IPSR_MSEL(IP2_22_20, FRE_A, SEL_FLCTL_0),
-
- PINMUX_IPSR_GPSR(IP2_24_23, D12),
- PINMUX_IPSR_MSEL(IP2_24_23, FWE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_24_23, ET0_ETXD5_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_27_25, D13),
- PINMUX_IPSR_MSEL(IP2_27_25, RX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_27_25, FRB_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_27_25, ET0_ETXD6_B, SEL_ET0_1),
-
- PINMUX_IPSR_GPSR(IP2_30_28, D14),
- PINMUX_IPSR_MSEL(IP2_30_28, TX2_B, SEL_SCIF2_1),
- PINMUX_IPSR_MSEL(IP2_30_28, FSE_A, SEL_FLCTL_0),
- PINMUX_IPSR_MSEL(IP2_30_28, ET0_TX_CLK_B, SEL_ET0_1),
-
- /* IPSR3 */
- PINMUX_IPSR_GPSR(IP3_1_0, D15),
- PINMUX_IPSR_MSEL(IP3_1_0, SCK2_B, SEL_SCIF2_1),
-
- PINMUX_IPSR_GPSR(IP3_2, CS1_A26),
- PINMUX_IPSR_MSEL(IP3_2, QIO3_B, SEL_RQSPI_1),
-
- PINMUX_IPSR_GPSR(IP3_5_3, EX_CS1),
- PINMUX_IPSR_MSEL(IP3_5_3, RX3_B, SEL_SCIF2_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ATACS0),
- PINMUX_IPSR_MSEL(IP3_5_3, QIO2_B, SEL_RQSPI_1),
- PINMUX_IPSR_GPSR(IP3_5_3, ET0_ETXD0),
-
- PINMUX_IPSR_GPSR(IP3_8_6, EX_CS2),
- PINMUX_IPSR_MSEL(IP3_8_6, TX3_B, SEL_SCIF3_1),
- PINMUX_IPSR_GPSR(IP3_8_6, ATACS1),
- PINMUX_IPSR_MSEL(IP3_8_6, QSPCLK_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_8_6, ET0_GTX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_11_9, EX_CS3),
- PINMUX_IPSR_MSEL(IP3_11_9, SD1_CD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_11_9, ATARD),
- PINMUX_IPSR_MSEL(IP3_11_9, QMO_QIO0_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_11_9, ET0_ETXD1_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_14_12, EX_CS4),
- PINMUX_IPSR_MSEL(IP3_14_12, SD1_WP_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_14_12, ATAWR),
- PINMUX_IPSR_MSEL(IP3_14_12, QMI_QIO1_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_14_12, ET0_ETXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_17_15, EX_CS5),
- PINMUX_IPSR_MSEL(IP3_17_15, SD1_CMD_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_17_15, ATADIR),
- PINMUX_IPSR_MSEL(IP3_17_15, QSSL_B, SEL_RQSPI_1),
- PINMUX_IPSR_MSEL(IP3_17_15, ET0_ETXD3_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_19_18, RD_WR),
- PINMUX_IPSR_GPSR(IP3_19_18, TCLK0),
- PINMUX_IPSR_MSEL(IP3_19_18, CAN_CLK_B, SEL_RCAN_CLK_1),
- PINMUX_IPSR_GPSR(IP3_19_18, ET0_ETXD4),
-
- PINMUX_IPSR_GPSR(IP3_20, EX_WAIT0),
- PINMUX_IPSR_MSEL(IP3_20, TCLK1_B, SEL_TMU_1),
-
- PINMUX_IPSR_GPSR(IP3_23_21, EX_WAIT1),
- PINMUX_IPSR_MSEL(IP3_23_21, SD1_DAT0_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_23_21, DREQ2),
- PINMUX_IPSR_MSEL(IP3_23_21, CAN1_TX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_LINK_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_23_21, ET0_ETXD5_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_26_24, EX_WAIT2),
- PINMUX_IPSR_MSEL(IP3_26_24, SD1_DAT1_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_26_24, DACK2),
- PINMUX_IPSR_MSEL(IP3_26_24, CAN1_RX_C, SEL_RCAN1_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_MAGIC_C, SEL_ET0_CTL_2),
- PINMUX_IPSR_MSEL(IP3_26_24, ET0_ETXD6_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP3_29_27, DRACK0),
- PINMUX_IPSR_MSEL(IP3_29_27, SD1_DAT2_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ATAG),
- PINMUX_IPSR_MSEL(IP3_29_27, TCLK1_A, SEL_TMU_0),
- PINMUX_IPSR_GPSR(IP3_29_27, ET0_ETXD7),
-
- /* IPSR4 */
- PINMUX_IPSR_MSEL(IP4_2_0, HCTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_2_0, CTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_2_0, VI0_FIELD),
- PINMUX_IPSR_MSEL(IP4_2_0, RMII0_RXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_2_0, ET0_ERXD7),
-
- PINMUX_IPSR_MSEL(IP4_5_3, HRTS0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_5_3, RTS1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_5_3, VI0_HSYNC),
- PINMUX_IPSR_MSEL(IP4_5_3, RMII0_TXD_EN_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_5_3, ET0_RX_DV),
-
- PINMUX_IPSR_MSEL(IP4_8_6, HSCK0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_8_6, SCK1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_VSYNC),
- PINMUX_IPSR_MSEL(IP4_8_6, RMII0_RX_ER_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_8_6, ET0_RX_ER),
-
- PINMUX_IPSR_MSEL(IP4_11_9, HRX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_11_9, RX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_11_9, VI0_DATA0_VI0_B0),
- PINMUX_IPSR_MSEL(IP4_11_9, RMII0_CRS_DV_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_11_9, ET0_CRS),
-
- PINMUX_IPSR_MSEL(IP4_14_12, HTX0_A, SEL_HSCIF_0),
- PINMUX_IPSR_MSEL(IP4_14_12, TX1_A, SEL_SCIF1_0),
- PINMUX_IPSR_GPSR(IP4_14_12, VI0_DATA1_VI0_B1),
- PINMUX_IPSR_MSEL(IP4_14_12, RMII0_MDC_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_14_12, ET0_COL),
-
- PINMUX_IPSR_MSEL(IP4_17_15, CTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_17_15, VI0_DATA2_VI0_B2),
- PINMUX_IPSR_MSEL(IP4_17_15, RMII0_MDIO_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP4_17_15, ET0_MDC),
-
- PINMUX_IPSR_MSEL(IP4_19_18, RTS0_B, SEL_SCIF0_1),
- PINMUX_IPSR_GPSR(IP4_19_18, VI0_DATA3_VI0_B3),
- PINMUX_IPSR_MSEL(IP4_19_18, ET0_MDIO_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP4_21_20, SCK1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_21_20, VI0_DATA4_VI0_B4),
- PINMUX_IPSR_MSEL(IP4_21_20, ET0_LINK_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_23_22, RX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_23_22, VI0_DATA5_VI0_B5),
- PINMUX_IPSR_MSEL(IP4_23_22, ET0_MAGIC_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_25_24, TX1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_25_24, VI0_DATA6_VI0_G0),
- PINMUX_IPSR_MSEL(IP4_25_24, ET0_PHY_INT_A, SEL_ET0_CTL_0),
-
- PINMUX_IPSR_MSEL(IP4_27_26, CTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_27_26, VI0_DATA7_VI0_G1),
-
- PINMUX_IPSR_MSEL(IP4_29_28, RTS1_B, SEL_SCIF1_1),
- PINMUX_IPSR_GPSR(IP4_29_28, VI0_G2),
-
- PINMUX_IPSR_MSEL(IP4_31_30, SCK2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP4_31_30, VI0_G3),
-
- /* IPSR5 */
- PINMUX_IPSR_MSEL(IP5_2_0, SD2_CLK_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_2_0, RX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_2_0, VI0_G4),
- PINMUX_IPSR_MSEL(IP5_2_0, ET0_RX_CLK_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_5_3, SD2_CMD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_5_3, TX2_A, SEL_SCIF2_0),
- PINMUX_IPSR_GPSR(IP5_5_3, VI0_G5),
- PINMUX_IPSR_MSEL(IP5_5_3, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_8_6, SD2_DAT0_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_8_6, RX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP4_8_6, VI0_R0),
- PINMUX_IPSR_MSEL(IP4_8_6, ET0_ERXD2_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_11_9, SD2_DAT1_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_11_9, TX3_A, SEL_SCIF3_0),
- PINMUX_IPSR_GPSR(IP5_11_9, VI0_R1),
- PINMUX_IPSR_MSEL(IP5_11_9, ET0_MDIO_B, SEL_ET0_1),
-
- PINMUX_IPSR_MSEL(IP5_14_12, SD2_DAT2_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_14_12, RX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_14_12, VI0_R2),
- PINMUX_IPSR_MSEL(IP5_14_12, ET0_LINK_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_17_15, SD2_DAT3_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_17_15, TX4_A, SEL_SCIF4_0),
- PINMUX_IPSR_GPSR(IP5_17_15, VI0_R3),
- PINMUX_IPSR_MSEL(IP5_17_15, ET0_MAGIC_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_20_18, SD2_CD_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_20_18, RX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_20_18, VI0_R4),
- PINMUX_IPSR_MSEL(IP5_20_18, ET0_PHY_INT_B, SEL_ET0_CTL_1),
-
- PINMUX_IPSR_MSEL(IP5_22_21, SD2_WP_A, SEL_SDHI2_0),
- PINMUX_IPSR_MSEL(IP5_22_21, TX5_A, SEL_SCIF5_0),
- PINMUX_IPSR_GPSR(IP5_22_21, VI0_R5),
-
- PINMUX_IPSR_GPSR(IP5_24_23, REF125CK),
- PINMUX_IPSR_GPSR(IP5_24_23, ADTRG),
- PINMUX_IPSR_MSEL(IP5_24_23, RX5_C, SEL_SCIF5_2),
- PINMUX_IPSR_GPSR(IP5_26_25, REF50CK),
- PINMUX_IPSR_MSEL(IP5_26_25, CTS1_E, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP5_26_25, HCTS0_D, SEL_HSCIF_3),
-
- /* IPSR6 */
- PINMUX_IPSR_GPSR(IP6_2_0, DU0_DR0),
- PINMUX_IPSR_MSEL(IP6_2_0, SCIF_CLK_B, SEL_SCIF_CLK_1),
- PINMUX_IPSR_MSEL(IP6_2_0, HRX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_2_0, IETX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_2_0, TCLKA_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_2_0, HIFD00),
-
- PINMUX_IPSR_GPSR(IP6_5_3, DU0_DR1),
- PINMUX_IPSR_MSEL(IP6_5_3, SCK0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_5_3, HTX0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_5_3, IERX_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_5_3, TCLKB_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_5_3, HIFD01),
-
- PINMUX_IPSR_GPSR(IP6_7_6, DU0_DR2),
- PINMUX_IPSR_MSEL(IP6_7_6, RX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_7_6, TCLKC_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_7_6, HIFD02),
-
- PINMUX_IPSR_GPSR(IP6_9_8, DU0_DR3),
- PINMUX_IPSR_MSEL(IP6_9_8, TX0_B, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_9_8, TCLKD_A, SEL_MTU2_CLK_0),
- PINMUX_IPSR_GPSR(IP6_9_8, HIFD03),
-
- PINMUX_IPSR_GPSR(IP6_11_10, DU0_DR4),
- PINMUX_IPSR_MSEL(IP6_11_10, CTS0_C, SEL_SCIF0_2),
- PINMUX_IPSR_MSEL(IP6_11_10, TIOC0A_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_11_10, HIFD04),
-
- PINMUX_IPSR_GPSR(IP6_13_12, DU0_DR5),
- PINMUX_IPSR_MSEL(IP6_13_12, RTS0_C, SEL_SCIF0_1),
- PINMUX_IPSR_MSEL(IP6_13_12, TIOC0B_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_13_12, HIFD05),
-
- PINMUX_IPSR_GPSR(IP6_15_14, DU0_DR6),
- PINMUX_IPSR_MSEL(IP6_15_14, SCK1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_15_14, TIOC0C_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_15_14, HIFD06),
-
- PINMUX_IPSR_GPSR(IP6_17_16, DU0_DR7),
- PINMUX_IPSR_MSEL(IP6_17_16, RX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_17_16, TIOC0D_A, SEL_MTU2_CH0_0),
- PINMUX_IPSR_GPSR(IP6_17_16, HIFD07),
-
- PINMUX_IPSR_GPSR(IP6_20_18, DU0_DG0),
- PINMUX_IPSR_MSEL(IP6_20_18, TX1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_20_18, HSCK0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_20_18, IECLK_A, SEL_IEBUS_0),
- PINMUX_IPSR_MSEL(IP6_20_18, TIOC1A_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_20_18, HIFD08),
-
- PINMUX_IPSR_GPSR(IP6_23_21, DU0_DG1),
- PINMUX_IPSR_MSEL(IP6_23_21, CTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP6_23_21, HRTS0_D, SEL_HSCIF_3),
- PINMUX_IPSR_MSEL(IP6_23_21, TIOC1B_A, SEL_MTU2_CH1_0),
- PINMUX_IPSR_GPSR(IP6_23_21, HIFD09),
-
- /* IPSR7 */
- PINMUX_IPSR_GPSR(IP7_2_0, DU0_DG2),
- PINMUX_IPSR_MSEL(IP7_2_0, RTS1_C, SEL_SCIF1_2),
- PINMUX_IPSR_MSEL(IP7_2_0, RMII0_MDC_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_2_0, TIOC2A_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_2_0, HIFD10),
-
- PINMUX_IPSR_GPSR(IP7_5_3, DU0_DG3),
- PINMUX_IPSR_MSEL(IP7_5_3, SCK2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_5_3, RMII0_MDIO_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_5_3, TIOC2B_A, SEL_MTU2_CH2_0),
- PINMUX_IPSR_GPSR(IP7_5_3, HIFD11),
-
- PINMUX_IPSR_GPSR(IP7_8_6, DU0_DG4),
- PINMUX_IPSR_MSEL(IP7_8_6, RX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_8_6, RMII0_CRS_DV_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_8_6, TIOC3A_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_8_6, HIFD12),
-
- PINMUX_IPSR_GPSR(IP7_11_9, DU0_DG5),
- PINMUX_IPSR_MSEL(IP7_11_9, TX2_C, SEL_SCIF2_2),
- PINMUX_IPSR_MSEL(IP7_11_9, RMII0_RX_ER_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_11_9, TIOC3B_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_11_9, HIFD13),
-
- PINMUX_IPSR_GPSR(IP7_14_12, DU0_DG6),
- PINMUX_IPSR_MSEL(IP7_14_12, RX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_14_12, RMII0_RXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_14_12, TIOC3C_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_14_12, HIFD14),
-
- PINMUX_IPSR_GPSR(IP7_17_15, DU0_DG7),
- PINMUX_IPSR_MSEL(IP7_17_15, TX3_C, SEL_SCIF3_2),
- PINMUX_IPSR_MSEL(IP7_17_15, RMII0_RXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_17_15, TIOC3D_A, SEL_MTU2_CH3_0),
- PINMUX_IPSR_GPSR(IP7_17_15, HIFD15),
-
- PINMUX_IPSR_GPSR(IP7_20_18, DU0_DB0),
- PINMUX_IPSR_MSEL(IP7_20_18, RX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_20_18, RMII0_TXD_EN_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_20_18, TIOC4A_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_20_18, HIFCS),
-
- PINMUX_IPSR_GPSR(IP7_23_21, DU0_DB1),
- PINMUX_IPSR_MSEL(IP7_23_21, TX4_C, SEL_SCIF4_2),
- PINMUX_IPSR_MSEL(IP7_23_21, RMII0_TXD0_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_23_21, TIOC4B_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_23_21, HIFWR),
-
- PINMUX_IPSR_GPSR(IP7_26_24, DU0_DB2),
- PINMUX_IPSR_MSEL(IP7_26_24, RX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_26_24, RMII0_TXD1_B, SEL_RMII_1),
- PINMUX_IPSR_MSEL(IP7_26_24, TIOC4C_A, SEL_MTU2_CH4_0),
-
- PINMUX_IPSR_GPSR(IP7_28_27, DU0_DB3),
- PINMUX_IPSR_MSEL(IP7_28_27, TX5_B, SEL_SCIF5_1),
- PINMUX_IPSR_MSEL(IP7_28_27, TIOC4D_A, SEL_MTU2_CH4_0),
- PINMUX_IPSR_GPSR(IP7_28_27, HIFRD),
-
- PINMUX_IPSR_GPSR(IP7_30_29, DU0_DB4),
- PINMUX_IPSR_GPSR(IP7_30_29, HIFINT),
-
- /* IPSR8 */
- PINMUX_IPSR_GPSR(IP8_1_0, DU0_DB5),
- PINMUX_IPSR_GPSR(IP8_1_0, HIFDREQ),
-
- PINMUX_IPSR_GPSR(IP8_3_2, DU0_DB6),
- PINMUX_IPSR_GPSR(IP8_3_2, HIFRDY),
-
- PINMUX_IPSR_GPSR(IP8_5_4, DU0_DB7),
- PINMUX_IPSR_MSEL(IP8_5_4, SSI_SCK0_B, SEL_SSI0_1),
- PINMUX_IPSR_MSEL(IP8_5_4, HIFEBL_B, SEL_HIF_1),
-
- PINMUX_IPSR_GPSR(IP8_7_6, DU0_DOTCLKIN),
- PINMUX_IPSR_MSEL(IP8_7_6, HSPI_CS0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_7_6, SSI_WS0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_9_8, DU0_DOTCLKOUT),
- PINMUX_IPSR_MSEL(IP8_9_8, HSPI_CLK0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_9_8, SSI_SDATA0_B, SEL_SSI0_1),
-
- PINMUX_IPSR_GPSR(IP8_11_10, DU0_EXHSYNC_DU0_HSYNC),
- PINMUX_IPSR_MSEL(IP8_11_10, HSPI_TX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_11_10, SSI_SCK1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_13_12, DU0_EXVSYNC_DU0_VSYNC),
- PINMUX_IPSR_MSEL(IP8_13_12, HSPI_RX0_C, SEL_HSPI_2),
- PINMUX_IPSR_MSEL(IP8_13_12, SSI_WS1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_15_14, DU0_EXODDF_DU0_ODDF),
- PINMUX_IPSR_MSEL(IP8_15_14, CAN0_RX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_15_14, HSCK0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_15_14, SSI_SDATA1_B, SEL_SSI1_1),
-
- PINMUX_IPSR_GPSR(IP8_17_16, DU0_DISP),
- PINMUX_IPSR_MSEL(IP8_17_16, CAN0_TX_B, SEL_RCAN0_1),
- PINMUX_IPSR_MSEL(IP8_17_16, HRX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_17_16, AUDIO_CLKA_B, SEL_AUDIO_CLKA_1),
-
- PINMUX_IPSR_GPSR(IP8_19_18, DU0_CDE),
- PINMUX_IPSR_MSEL(IP8_19_18, HTX0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_19_18, AUDIO_CLKB_B, SEL_AUDIO_CLKB_1),
- PINMUX_IPSR_MSEL(IP8_19_18, LCD_VCPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP8_22_20, IRQ0_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_22_20, HSPI_TX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_22_20, RX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_22_20, ET0_ERXD0),
-
- PINMUX_IPSR_MSEL(IP8_25_23, IRQ1_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_25_23, HSPI_RX_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP8_25_23, TX3_E, SEL_SCIF3_4),
- PINMUX_IPSR_GPSR(IP8_25_23, ET0_ERXD1),
-
- PINMUX_IPSR_MSEL(IP8_27_26, IRQ2_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_27_26, CTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_27_26, HCTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_27_26, ET0_ERXD2_A, SEL_ET0_0),
-
- PINMUX_IPSR_MSEL(IP8_29_28, IRQ3_A, SEL_INTC_0),
- PINMUX_IPSR_MSEL(IP8_29_28, RTS0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP8_29_28, HRTS0_B, SEL_HSCIF_1),
- PINMUX_IPSR_MSEL(IP8_29_28, ET0_ERXD3_A, SEL_ET0_0),
-
- /* IPSR9 */
- PINMUX_IPSR_MSEL(IP9_1_0, VI1_CLK_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_1_0, FD0_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_1_0, LCD_DATA0_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_3_2, VI1_0_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_3_2, FD1_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_3_2, LCD_DATA1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_5_4, VI1_1_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_5_4, FD2_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_5_4, LCD_DATA2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_7_6, VI1_2_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_7_6, FD3_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_7_6, LCD_DATA3_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_9_8, VI1_3_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_9_8, FD4_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_9_8, LCD_DATA4_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_11_10, VI1_4_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_11_10, FD5_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_11_10, LCD_DATA5_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_13_12, VI1_5_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_13_12, FD6_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_13_12, LCD_DATA6_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_15_14, VI1_6_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_15_14, FD7_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_15_14, LCD_DATA7_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_17_16, VI1_7_A, SEL_VIN1_0),
- PINMUX_IPSR_MSEL(IP9_17_16, FCE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP9_17_16, LCD_DATA8_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_19_18, SSI_SCK0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_19_18, TIOC1A_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_19_18, LCD_DATA9_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_21_20, SSI_WS0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_21_20, TIOC1B_B, SEL_MTU2_CH1_1),
- PINMUX_IPSR_MSEL(IP9_21_20, LCD_DATA10_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_23_22, SSI_SDATA0_A, SEL_SSI0_0),
- PINMUX_IPSR_MSEL(IP9_23_22, VI1_0_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_23_22, TIOC2A_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_23_22, LCD_DATA11_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_25_24, SSI_SCK1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_25_24, VI1_1_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_25_24, TIOC2B_B, SEL_MTU2_CH2_1),
- PINMUX_IPSR_MSEL(IP9_25_24, LCD_DATA12_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_27_26, SSI_WS1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_27_26, VI1_2_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_27_26, LCD_DATA13_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP9_29_28, SSI_SDATA1_A, SEL_SSI1_0),
- PINMUX_IPSR_MSEL(IP9_29_28, VI1_3_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP9_29_28, LCD_DATA14_B, SEL_LCDC_1),
-
- /* IPSE10 */
- PINMUX_IPSR_GPSR(IP10_2_0, SSI_SCK23),
- PINMUX_IPSR_MSEL(IP10_2_0, VI1_4_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_2_0, RX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_2_0, FCLE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_2_0, LCD_DATA15_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_5_3, SSI_WS23),
- PINMUX_IPSR_MSEL(IP10_5_3, VI1_5_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_5_3, TX1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_5_3, HSCK0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_5_3, FALE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_5_3, LCD_DON_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_8_6, SSI_SDATA2),
- PINMUX_IPSR_MSEL(IP10_8_6, VI1_6_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_8_6, HRX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_8_6, FRE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_8_6, LCD_CL1_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_11_9, SSI_SDATA3),
- PINMUX_IPSR_MSEL(IP10_11_9, VI1_7_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_11_9, HTX0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_11_9, FWE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_11_9, LCD_CL2_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_14_12, AUDIO_CLKA_A, SEL_AUDIO_CLKA_0),
- PINMUX_IPSR_MSEL(IP10_14_12, VI1_CLK_B, SEL_VIN1_1),
- PINMUX_IPSR_MSEL(IP10_14_12, SCK1_D, SEL_SCIF1_3),
- PINMUX_IPSR_MSEL(IP10_14_12, IECLK_B, SEL_IEBUS_1),
- PINMUX_IPSR_MSEL(IP10_14_12, LCD_FLM_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_15, AUDIO_CLKB_A, SEL_AUDIO_CLKB_0),
- PINMUX_IPSR_MSEL(IP10_15, LCD_CLK_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_18_16, AUDIO_CLKC),
- PINMUX_IPSR_MSEL(IP10_18_16, SCK1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_18_16, HCTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_18_16, FRB_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_18_16, LCD_VEPWC_B, SEL_LCDC_1),
-
- PINMUX_IPSR_GPSR(IP10_21_19, AUDIO_CLKOUT),
- PINMUX_IPSR_MSEL(IP10_21_19, TX1_E, SEL_SCIF1_4),
- PINMUX_IPSR_MSEL(IP10_21_19, HRTS0_C, SEL_HSCIF_2),
- PINMUX_IPSR_MSEL(IP10_21_19, FSE_B, SEL_FLCTL_1),
- PINMUX_IPSR_MSEL(IP10_21_19, LCD_M_DISP_B, SEL_LCDC_1),
-
- PINMUX_IPSR_MSEL(IP10_22, CAN_CLK_A, SEL_RCAN_CLK_0),
- PINMUX_IPSR_MSEL(IP10_22, RX4_D, SEL_SCIF4_3),
-
- PINMUX_IPSR_MSEL(IP10_24_23, CAN0_TX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_24_23, TX4_D, SEL_SCIF4_3),
- PINMUX_IPSR_GPSR(IP10_24_23, MLB_CLK),
-
- PINMUX_IPSR_MSEL(IP10_25, CAN1_RX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_25, IRQ1_B, SEL_INTC_1),
-
- PINMUX_IPSR_MSEL(IP10_27_26, CAN0_RX_A, SEL_RCAN0_0),
- PINMUX_IPSR_MSEL(IP10_27_26, IRQ0_B, SEL_INTC_1),
- PINMUX_IPSR_GPSR(IP10_27_26, MLB_SIG),
-
- PINMUX_IPSR_MSEL(IP10_29_28, CAN1_TX_A, SEL_RCAN1_0),
- PINMUX_IPSR_MSEL(IP10_29_28, TX5_C, SEL_SCIF1_2),
- PINMUX_IPSR_GPSR(IP10_29_28, MLB_DAT),
-
- /* IPSR11 */
- PINMUX_IPSR_GPSR(IP11_0, SCL1),
- PINMUX_IPSR_MSEL(IP11_0, SCIF_CLK_C, SEL_SCIF_CLK_2),
-
- PINMUX_IPSR_GPSR(IP11_1, SDA1),
- PINMUX_IPSR_MSEL(IP11_0, RX1_E, SEL_SCIF1_4),
-
- PINMUX_IPSR_GPSR(IP11_2, SDA0),
- PINMUX_IPSR_MSEL(IP11_2, HIFEBL_A, SEL_HIF_0),
-
- PINMUX_IPSR_GPSR(IP11_3, SDSELF),
- PINMUX_IPSR_MSEL(IP11_3, RTS1_E, SEL_SCIF1_3),
-
- PINMUX_IPSR_MSEL(IP11_6_4, SCIF_CLK_A, SEL_SCIF_CLK_0),
- PINMUX_IPSR_MSEL(IP11_6_4, HSPI_CLK_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_6_4, VI0_CLK),
- PINMUX_IPSR_MSEL(IP11_6_4, RMII0_TXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_6_4, ET0_ERXD4),
-
- PINMUX_IPSR_MSEL(IP11_9_7, SCK0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_9_7, HSPI_CS_A, SEL_HSPI_0),
- PINMUX_IPSR_GPSR(IP11_9_7, VI0_CLKENB),
- PINMUX_IPSR_MSEL(IP11_9_7, RMII0_TXD1_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_9_7, ET0_ERXD5),
-
- PINMUX_IPSR_MSEL(IP11_11_10, RX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_11_10, HSPI_RX_A, SEL_HSPI_0),
- PINMUX_IPSR_MSEL(IP11_11_10, RMII0_RXD0_A, SEL_RMII_0),
- PINMUX_IPSR_GPSR(IP11_11_10, ET0_ERXD6),
-
- PINMUX_IPSR_MSEL(IP11_12, TX0_A, SEL_SCIF0_0),
- PINMUX_IPSR_MSEL(IP11_12, HSPI_TX_A, SEL_HSPI_0),
-
- PINMUX_IPSR_GPSR(IP11_15_13, PENC1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_15_13, CAN1_TX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_15_13, TX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_15_13, IETX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_18_16, USB_OVC1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX3_D, SEL_SCIF3_3),
- PINMUX_IPSR_MSEL(IP11_18_16, CAN1_RX_B, SEL_RCAN1_1),
- PINMUX_IPSR_MSEL(IP11_18_16, RX5_D, SEL_SCIF5_3),
- PINMUX_IPSR_MSEL(IP11_18_16, IERX_B, SEL_IEBUS_1),
-
- PINMUX_IPSR_GPSR(IP11_20_19, DREQ0),
- PINMUX_IPSR_MSEL(IP11_20_19, SD1_CLK_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_20_19, ET0_TX_EN),
-
- PINMUX_IPSR_GPSR(IP11_22_21, DACK0),
- PINMUX_IPSR_MSEL(IP11_22_21, SD1_DAT3_A, SEL_SDHI1_0),
- PINMUX_IPSR_GPSR(IP11_22_21, ET0_TX_ER),
-
- PINMUX_IPSR_GPSR(IP11_25_23, DREQ1),
- PINMUX_IPSR_MSEL(IP11_25_23, HSPI_CLK_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_25_23, RX4_B, SEL_SCIF4_1),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_PHY_INT_C, SEL_ET0_CTL_0),
- PINMUX_IPSR_MSEL(IP11_25_23, ET0_TX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_27_26, DACK1),
- PINMUX_IPSR_MSEL(IP11_27_26, HSPI_CS_B, SEL_HSPI_1),
- PINMUX_IPSR_MSEL(IP11_27_26, TX4_B, SEL_SCIF3_1),
- PINMUX_IPSR_MSEL(IP11_27_26, ET0_RX_CLK_A, SEL_ET0_0),
-
- PINMUX_IPSR_GPSR(IP11_28, PRESETOUT),
- PINMUX_IPSR_GPSR(IP11_28, ST_CLKOUT),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- PINMUX_GPIO_GP_ALL(),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- GPIO_FN(CLKOUT), GPIO_FN(BS), GPIO_FN(CS0), GPIO_FN(EX_CS0),
- GPIO_FN(RD), GPIO_FN(WE0), GPIO_FN(WE1),
- GPIO_FN(SCL0), GPIO_FN(PENC0), GPIO_FN(USB_OVC0),
- GPIO_FN(IRQ2_B), GPIO_FN(IRQ3_B),
-
- /* IPSR0 */
- GPIO_FN(A0), GPIO_FN(ST0_CLKIN), GPIO_FN(LCD_DATA0_A),
- GPIO_FN(TCLKA_C),
- GPIO_FN(A1), GPIO_FN(ST0_REQ), GPIO_FN(LCD_DATA1_A),
- GPIO_FN(TCLKB_C),
- GPIO_FN(A2), GPIO_FN(ST0_SYC), GPIO_FN(LCD_DATA2_A),
- GPIO_FN(TCLKC_C),
- GPIO_FN(A3), GPIO_FN(ST0_VLD), GPIO_FN(LCD_DATA3_A),
- GPIO_FN(TCLKD_C),
- GPIO_FN(A4), GPIO_FN(ST0_D0), GPIO_FN(LCD_DATA4_A),
- GPIO_FN(TIOC0A_C),
- GPIO_FN(A5), GPIO_FN(ST0_D1), GPIO_FN(LCD_DATA5_A),
- GPIO_FN(TIOC0B_C),
- GPIO_FN(A6), GPIO_FN(ST0_D2), GPIO_FN(LCD_DATA6_A),
- GPIO_FN(TIOC0C_C),
- GPIO_FN(A7), GPIO_FN(ST0_D3), GPIO_FN(LCD_DATA7_A),
- GPIO_FN(TIOC0D_C),
- GPIO_FN(A8), GPIO_FN(ST0_D4), GPIO_FN(LCD_DATA8_A),
- GPIO_FN(TIOC1A_C),
- GPIO_FN(A9), GPIO_FN(ST0_D5), GPIO_FN(LCD_DATA9_A),
- GPIO_FN(TIOC1B_C),
- GPIO_FN(A10), GPIO_FN(ST0_D6), GPIO_FN(LCD_DATA10_A),
- GPIO_FN(TIOC2A_C),
- GPIO_FN(A11), GPIO_FN(ST0_D7), GPIO_FN(LCD_DATA11_A),
- GPIO_FN(TIOC2B_C),
- GPIO_FN(A12), GPIO_FN(LCD_DATA12_A), GPIO_FN(TIOC3A_C),
- GPIO_FN(A13), GPIO_FN(LCD_DATA13_A), GPIO_FN(TIOC3B_C),
- GPIO_FN(A14), GPIO_FN(LCD_DATA14_A), GPIO_FN(TIOC3C_C),
- GPIO_FN(A15), GPIO_FN(ST0_VCO_CLKIN), GPIO_FN(LCD_DATA15_A),
- GPIO_FN(TIOC3D_C),
-
- /* IPSR1 */
- GPIO_FN(A16), GPIO_FN(ST0_PWM), GPIO_FN(LCD_DON_A),
- GPIO_FN(TIOC4A_C),
- GPIO_FN(A17), GPIO_FN(ST1_VCO_CLKIN), GPIO_FN(LCD_CL1_A),
- GPIO_FN(TIOC4B_C),
- GPIO_FN(A18), GPIO_FN(ST1_PWM), GPIO_FN(LCD_CL2_A),
- GPIO_FN(TIOC4C_C),
- GPIO_FN(A19), GPIO_FN(ST1_CLKIN), GPIO_FN(LCD_CLK_A),
- GPIO_FN(TIOC4D_C),
- GPIO_FN(A20), GPIO_FN(ST1_REQ), GPIO_FN(LCD_FLM_A),
- GPIO_FN(A21), GPIO_FN(ST1_SYC), GPIO_FN(LCD_VCPWC_A),
- GPIO_FN(A22), GPIO_FN(ST1_VLD), GPIO_FN(LCD_VEPWC_A),
- GPIO_FN(A23), GPIO_FN(ST1_D0), GPIO_FN(LCD_M_DISP_A),
- GPIO_FN(A24), GPIO_FN(RX2_D), GPIO_FN(ST1_D1),
- GPIO_FN(A25), GPIO_FN(TX2_D), GPIO_FN(ST1_D2),
- GPIO_FN(D0), GPIO_FN(SD0_DAT0_A), GPIO_FN(MMC_D0_A),
- GPIO_FN(ST1_D3), GPIO_FN(FD0_A),
- GPIO_FN(D1), GPIO_FN(SD0_DAT1_A), GPIO_FN(MMC_D1_A),
- GPIO_FN(ST1_D4), GPIO_FN(FD1_A),
- GPIO_FN(D2), GPIO_FN(SD0_DAT2_A), GPIO_FN(MMC_D2_A),
- GPIO_FN(ST1_D5), GPIO_FN(FD2_A),
- GPIO_FN(D3), GPIO_FN(SD0_DAT3_A), GPIO_FN(MMC_D3_A),
- GPIO_FN(ST1_D6), GPIO_FN(FD3_A),
-
- /* IPSR2 */
- GPIO_FN(D4), GPIO_FN(SD0_CD_A), GPIO_FN(MMC_D4_A), GPIO_FN(ST1_D7),
- GPIO_FN(FD4_A),
- GPIO_FN(D5), GPIO_FN(SD0_WP_A), GPIO_FN(MMC_D5_A), GPIO_FN(FD5_A),
- GPIO_FN(D6), GPIO_FN(RSPI_RSPCK_A), GPIO_FN(MMC_D6_A),
- GPIO_FN(QSPCLK_A),
- GPIO_FN(FD6_A),
- GPIO_FN(D7), GPIO_FN(RSPI_SSL_A), GPIO_FN(MMC_D7_A), GPIO_FN(QSSL_A),
- GPIO_FN(FD7_A),
- GPIO_FN(D8), GPIO_FN(SD0_CLK_A), GPIO_FN(MMC_CLK_A), GPIO_FN(QIO2_A),
- GPIO_FN(FCE_A), GPIO_FN(ET0_GTX_CLK_B),
- GPIO_FN(D9), GPIO_FN(SD0_CMD_A), GPIO_FN(MMC_CMD_A), GPIO_FN(QIO3_A),
- GPIO_FN(FCLE_A), GPIO_FN(ET0_ETXD1_B),
- GPIO_FN(D10), GPIO_FN(RSPI_MOSI_A), GPIO_FN(QMO_QIO0_A),
- GPIO_FN(FALE_A), GPIO_FN(ET0_ETXD2_B),
- GPIO_FN(D11), GPIO_FN(RSPI_MISO_A), GPIO_FN(QMI_QIO1_A), GPIO_FN(FRE_A),
- GPIO_FN(ET0_ETXD3_B),
- GPIO_FN(D12), GPIO_FN(FWE_A), GPIO_FN(ET0_ETXD5_B),
- GPIO_FN(D13), GPIO_FN(RX2_B), GPIO_FN(FRB_A), GPIO_FN(ET0_ETXD6_B),
- GPIO_FN(D14), GPIO_FN(TX2_B), GPIO_FN(FSE_A), GPIO_FN(ET0_TX_CLK_B),
-
- /* IPSR3 */
- GPIO_FN(D15), GPIO_FN(SCK2_B),
- GPIO_FN(CS1_A26), GPIO_FN(QIO3_B),
- GPIO_FN(EX_CS1), GPIO_FN(RX3_B), GPIO_FN(ATACS0), GPIO_FN(QIO2_B),
- GPIO_FN(ET0_ETXD0),
- GPIO_FN(EX_CS2), GPIO_FN(TX3_B), GPIO_FN(ATACS1), GPIO_FN(QSPCLK_B),
- GPIO_FN(ET0_GTX_CLK_A),
- GPIO_FN(EX_CS3), GPIO_FN(SD1_CD_A), GPIO_FN(ATARD), GPIO_FN(QMO_QIO0_B),
- GPIO_FN(ET0_ETXD1_A),
- GPIO_FN(EX_CS4), GPIO_FN(SD1_WP_A), GPIO_FN(ATAWR), GPIO_FN(QMI_QIO1_B),
- GPIO_FN(ET0_ETXD2_A),
- GPIO_FN(EX_CS5), GPIO_FN(SD1_CMD_A), GPIO_FN(ATADIR), GPIO_FN(QSSL_B),
- GPIO_FN(ET0_ETXD3_A),
- GPIO_FN(RD_WR), GPIO_FN(TCLK0), GPIO_FN(CAN_CLK_B), GPIO_FN(ET0_ETXD4),
- GPIO_FN(EX_WAIT0), GPIO_FN(TCLK1_B),
- GPIO_FN(EX_WAIT1), GPIO_FN(SD1_DAT0_A), GPIO_FN(DREQ2),
- GPIO_FN(CAN1_TX_C), GPIO_FN(ET0_LINK_C), GPIO_FN(ET0_ETXD5_A),
- GPIO_FN(EX_WAIT2), GPIO_FN(SD1_DAT1_A), GPIO_FN(DACK2),
- GPIO_FN(CAN1_RX_C), GPIO_FN(ET0_MAGIC_C), GPIO_FN(ET0_ETXD6_A),
- GPIO_FN(DRACK0), GPIO_FN(SD1_DAT2_A), GPIO_FN(ATAG), GPIO_FN(TCLK1_A),
- GPIO_FN(ET0_ETXD7),
-
- /* IPSR4 */
- GPIO_FN(HCTS0_A), GPIO_FN(CTS1_A), GPIO_FN(VI0_FIELD),
- GPIO_FN(RMII0_RXD1_A), GPIO_FN(ET0_ERXD7),
- GPIO_FN(HRTS0_A), GPIO_FN(RTS1_A), GPIO_FN(VI0_HSYNC),
- GPIO_FN(RMII0_TXD_EN_A), GPIO_FN(ET0_RX_DV),
- GPIO_FN(HSCK0_A), GPIO_FN(SCK1_A), GPIO_FN(VI0_VSYNC),
- GPIO_FN(RMII0_RX_ER_A), GPIO_FN(ET0_RX_ER),
- GPIO_FN(HRX0_A), GPIO_FN(RX1_A), GPIO_FN(VI0_DATA0_VI0_B0),
- GPIO_FN(RMII0_CRS_DV_A), GPIO_FN(ET0_CRS),
- GPIO_FN(HTX0_A), GPIO_FN(TX1_A), GPIO_FN(VI0_DATA1_VI0_B1),
- GPIO_FN(RMII0_MDC_A), GPIO_FN(ET0_COL),
- GPIO_FN(CTS0_B), GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(RMII0_MDIO_A),
- GPIO_FN(ET0_MDC),
- GPIO_FN(RTS0_B), GPIO_FN(VI0_DATA3_VI0_B3), GPIO_FN(ET0_MDIO_A),
- GPIO_FN(SCK1_B), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(ET0_LINK_A),
- GPIO_FN(RX1_B), GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(ET0_MAGIC_A),
- GPIO_FN(TX1_B), GPIO_FN(VI0_DATA6_VI0_G0), GPIO_FN(ET0_PHY_INT_A),
- GPIO_FN(CTS1_B), GPIO_FN(VI0_DATA7_VI0_G1),
- GPIO_FN(RTS1_B), GPIO_FN(VI0_G2),
- GPIO_FN(SCK2_A), GPIO_FN(VI0_G3),
-
- /* IPSR5 */
- GPIO_FN(REF50CK), GPIO_FN(CTS1_E), GPIO_FN(HCTS0_D),
- GPIO_FN(REF125CK), GPIO_FN(ADTRG), GPIO_FN(RX5_C),
- GPIO_FN(SD2_WP_A), GPIO_FN(TX5_A), GPIO_FN(VI0_R5),
- GPIO_FN(SD2_CD_A), GPIO_FN(RX5_A), GPIO_FN(VI0_R4),
- GPIO_FN(ET0_PHY_INT_B),
- GPIO_FN(SD2_DAT3_A), GPIO_FN(TX4_A), GPIO_FN(VI0_R3),
- GPIO_FN(ET0_MAGIC_B),
- GPIO_FN(SD2_DAT2_A), GPIO_FN(RX4_A), GPIO_FN(VI0_R2),
- GPIO_FN(ET0_LINK_B),
- GPIO_FN(SD2_DAT1_A), GPIO_FN(TX3_A), GPIO_FN(VI0_R1),
- GPIO_FN(ET0_MDIO_B),
- GPIO_FN(SD2_DAT0_A), GPIO_FN(RX3_A), GPIO_FN(VI0_R0),
- GPIO_FN(ET0_ERXD3_B),
- GPIO_FN(SD2_CMD_A), GPIO_FN(TX2_A), GPIO_FN(VI0_G5),
- GPIO_FN(ET0_ERXD2_B),
- GPIO_FN(SD2_CLK_A), GPIO_FN(RX2_A), GPIO_FN(VI0_G4),
- GPIO_FN(ET0_RX_CLK_B),
-
- /* IPSR6 */
- GPIO_FN(DU0_DG1), GPIO_FN(CTS1_C), GPIO_FN(HRTS0_D),
- GPIO_FN(TIOC1B_A), GPIO_FN(HIFD09),
- GPIO_FN(DU0_DG0), GPIO_FN(TX1_C), GPIO_FN(HSCK0_D),
- GPIO_FN(IECLK_A), GPIO_FN(TIOC1A_A), GPIO_FN(HIFD08),
- GPIO_FN(DU0_DR7), GPIO_FN(RX1_C), GPIO_FN(TIOC0D_A),
- GPIO_FN(HIFD07),
- GPIO_FN(DU0_DR6), GPIO_FN(SCK1_C), GPIO_FN(TIOC0C_A),
- GPIO_FN(HIFD06),
- GPIO_FN(DU0_DR5), GPIO_FN(RTS0_C), GPIO_FN(TIOC0B_A),
- GPIO_FN(HIFD05),
- GPIO_FN(DU0_DR4), GPIO_FN(CTS0_C), GPIO_FN(TIOC0A_A),
- GPIO_FN(HIFD04),
- GPIO_FN(DU0_DR3), GPIO_FN(TX0_B), GPIO_FN(TCLKD_A), GPIO_FN(HIFD03),
- GPIO_FN(DU0_DR2), GPIO_FN(RX0_B), GPIO_FN(TCLKC_A), GPIO_FN(HIFD02),
- GPIO_FN(DU0_DR1), GPIO_FN(SCK0_B), GPIO_FN(HTX0_D),
- GPIO_FN(IERX_A), GPIO_FN(TCLKB_A), GPIO_FN(HIFD01),
- GPIO_FN(DU0_DR0), GPIO_FN(SCIF_CLK_B), GPIO_FN(HRX0_D),
- GPIO_FN(IETX_A), GPIO_FN(TCLKA_A), GPIO_FN(HIFD00),
-
- /* IPSR7 */
- GPIO_FN(DU0_DB4), GPIO_FN(HIFINT),
- GPIO_FN(DU0_DB3), GPIO_FN(TX5_B), GPIO_FN(TIOC4D_A), GPIO_FN(HIFRD),
- GPIO_FN(DU0_DB2), GPIO_FN(RX5_B), GPIO_FN(RMII0_TXD1_B),
- GPIO_FN(TIOC4C_A), GPIO_FN(HIFWR),
- GPIO_FN(DU0_DB1), GPIO_FN(TX4_C), GPIO_FN(RMII0_TXD0_B),
- GPIO_FN(TIOC4B_A), GPIO_FN(HIFRS),
- GPIO_FN(DU0_DB0), GPIO_FN(RX4_C), GPIO_FN(RMII0_TXD_EN_B),
- GPIO_FN(TIOC4A_A), GPIO_FN(HIFCS),
- GPIO_FN(DU0_DG7), GPIO_FN(TX3_C), GPIO_FN(RMII0_RXD1_B),
- GPIO_FN(TIOC3D_A), GPIO_FN(HIFD15),
- GPIO_FN(DU0_DG6), GPIO_FN(RX3_C), GPIO_FN(RMII0_RXD0_B),
- GPIO_FN(TIOC3C_A), GPIO_FN(HIFD14),
- GPIO_FN(DU0_DG5), GPIO_FN(TX2_C), GPIO_FN(RMII0_RX_ER_B),
- GPIO_FN(TIOC3B_A), GPIO_FN(HIFD13),
- GPIO_FN(DU0_DG4), GPIO_FN(RX2_C), GPIO_FN(RMII0_CRS_DV_B),
- GPIO_FN(TIOC3A_A), GPIO_FN(HIFD12),
- GPIO_FN(DU0_DG3), GPIO_FN(SCK2_C), GPIO_FN(RMII0_MDIO_B),
- GPIO_FN(TIOC2B_A), GPIO_FN(HIFD11),
- GPIO_FN(DU0_DG2), GPIO_FN(RTS1_C), GPIO_FN(RMII0_MDC_B),
- GPIO_FN(TIOC2A_A), GPIO_FN(HIFD10),
-
- /* IPSR8 */
- GPIO_FN(IRQ3_A), GPIO_FN(RTS0_A), GPIO_FN(HRTS0_B),
- GPIO_FN(ET0_ERXD3_A),
- GPIO_FN(IRQ2_A), GPIO_FN(CTS0_A), GPIO_FN(HCTS0_B),
- GPIO_FN(ET0_ERXD2_A),
- GPIO_FN(IRQ1_A), GPIO_FN(HSPI_RX_B), GPIO_FN(TX3_E),
- GPIO_FN(ET0_ERXD1),
- GPIO_FN(IRQ0_A), GPIO_FN(HSPI_TX_B), GPIO_FN(RX3_E),
- GPIO_FN(ET0_ERXD0),
- GPIO_FN(DU0_CDE), GPIO_FN(HTX0_B), GPIO_FN(AUDIO_CLKB_B),
- GPIO_FN(LCD_VCPWC_B),
- GPIO_FN(DU0_DISP), GPIO_FN(CAN0_TX_B), GPIO_FN(HRX0_B),
- GPIO_FN(AUDIO_CLKA_B),
- GPIO_FN(DU0_EXODDF_DU0_ODDF), GPIO_FN(CAN0_RX_B), GPIO_FN(HSCK0_B),
- GPIO_FN(SSI_SDATA1_B),
- GPIO_FN(DU0_EXVSYNC_DU0_VSYNC), GPIO_FN(HSPI_RX0_C),
- GPIO_FN(SSI_WS1_B),
- GPIO_FN(DU0_EXHSYNC_DU0_HSYNC), GPIO_FN(HSPI_TX0_C),
- GPIO_FN(SSI_SCK1_B),
- GPIO_FN(DU0_DOTCLKOUT), GPIO_FN(HSPI_CLK0_C),
- GPIO_FN(SSI_SDATA0_B),
- GPIO_FN(DU0_DOTCLKIN), GPIO_FN(HSPI_CS0_C),
- GPIO_FN(SSI_WS0_B),
- GPIO_FN(DU0_DB7), GPIO_FN(SSI_SCK0_B), GPIO_FN(HIFEBL_B),
- GPIO_FN(DU0_DB6), GPIO_FN(HIFRDY),
- GPIO_FN(DU0_DB5), GPIO_FN(HIFDREQ),
-
- /* IPSR9 */
- GPIO_FN(SSI_SDATA1_A), GPIO_FN(VI1_3_B), GPIO_FN(LCD_DATA14_B),
- GPIO_FN(SSI_WS1_A), GPIO_FN(VI1_2_B), GPIO_FN(LCD_DATA13_B),
- GPIO_FN(SSI_SCK1_A), GPIO_FN(VI1_1_B), GPIO_FN(TIOC2B_B),
- GPIO_FN(LCD_DATA12_B),
- GPIO_FN(SSI_SDATA0_A), GPIO_FN(VI1_0_B), GPIO_FN(TIOC2A_B),
- GPIO_FN(LCD_DATA11_B),
- GPIO_FN(SSI_WS0_A), GPIO_FN(TIOC1B_B), GPIO_FN(LCD_DATA10_B),
- GPIO_FN(SSI_SCK0_A), GPIO_FN(TIOC1A_B), GPIO_FN(LCD_DATA9_B),
- GPIO_FN(VI1_7_A), GPIO_FN(FCE_B), GPIO_FN(LCD_DATA8_B),
- GPIO_FN(VI1_6_A), GPIO_FN(FD7_B), GPIO_FN(LCD_DATA7_B),
- GPIO_FN(VI1_5_A), GPIO_FN(FD6_B), GPIO_FN(LCD_DATA6_B),
- GPIO_FN(VI1_4_A), GPIO_FN(FD5_B), GPIO_FN(LCD_DATA5_B),
- GPIO_FN(VI1_3_A), GPIO_FN(FD4_B), GPIO_FN(LCD_DATA4_B),
- GPIO_FN(VI1_2_A), GPIO_FN(FD3_B), GPIO_FN(LCD_DATA3_B),
- GPIO_FN(VI1_1_A), GPIO_FN(FD2_B), GPIO_FN(LCD_DATA2_B),
- GPIO_FN(VI1_0_A), GPIO_FN(FD1_B), GPIO_FN(LCD_DATA1_B),
- GPIO_FN(VI1_CLK_A), GPIO_FN(FD0_B), GPIO_FN(LCD_DATA0_B),
-
- /* IPSR10 */
- GPIO_FN(CAN1_TX_A), GPIO_FN(TX5_C), GPIO_FN(MLB_DAT),
- GPIO_FN(CAN0_RX_A), GPIO_FN(IRQ0_B), GPIO_FN(MLB_SIG),
- GPIO_FN(CAN1_RX_A), GPIO_FN(IRQ1_B),
- GPIO_FN(CAN0_TX_A), GPIO_FN(TX4_D), GPIO_FN(MLB_CLK),
- GPIO_FN(CAN_CLK_A), GPIO_FN(RX4_D),
- GPIO_FN(AUDIO_CLKOUT), GPIO_FN(TX1_E), GPIO_FN(HRTS0_C),
- GPIO_FN(FSE_B), GPIO_FN(LCD_M_DISP_B),
- GPIO_FN(AUDIO_CLKC), GPIO_FN(SCK1_E), GPIO_FN(HCTS0_C),
- GPIO_FN(FRB_B), GPIO_FN(LCD_VEPWC_B),
- GPIO_FN(AUDIO_CLKB_A), GPIO_FN(LCD_CLK_B),
- GPIO_FN(AUDIO_CLKA_A), GPIO_FN(VI1_CLK_B), GPIO_FN(SCK1_D),
- GPIO_FN(IECLK_B), GPIO_FN(LCD_FLM_B),
- GPIO_FN(SSI_SDATA3), GPIO_FN(VI1_7_B), GPIO_FN(HTX0_C),
- GPIO_FN(FWE_B), GPIO_FN(LCD_CL2_B),
- GPIO_FN(SSI_SDATA2), GPIO_FN(VI1_6_B), GPIO_FN(HRX0_C),
- GPIO_FN(FRE_B), GPIO_FN(LCD_CL1_B),
- GPIO_FN(SSI_WS23), GPIO_FN(VI1_5_B), GPIO_FN(TX1_D),
- GPIO_FN(HSCK0_C), GPIO_FN(FALE_B), GPIO_FN(LCD_DON_B),
- GPIO_FN(SSI_SCK23), GPIO_FN(VI1_4_B), GPIO_FN(RX1_D),
- GPIO_FN(FCLE_B), GPIO_FN(LCD_DATA15_B),
-
- /* IPSR11 */
- GPIO_FN(PRESETOUT), GPIO_FN(ST_CLKOUT),
- GPIO_FN(DACK1), GPIO_FN(HSPI_CS_B), GPIO_FN(TX4_B),
- GPIO_FN(ET0_RX_CLK_A),
- GPIO_FN(DREQ1), GPIO_FN(HSPI_CLK_B), GPIO_FN(RX4_B),
- GPIO_FN(ET0_PHY_INT_C), GPIO_FN(ET0_TX_CLK_A),
- GPIO_FN(DACK0), GPIO_FN(SD1_DAT3_A), GPIO_FN(ET0_TX_ER),
- GPIO_FN(DREQ0), GPIO_FN(SD1_CLK_A), GPIO_FN(ET0_TX_EN),
- GPIO_FN(USB_OVC1), GPIO_FN(RX3_D), GPIO_FN(CAN1_RX_B),
- GPIO_FN(RX5_D), GPIO_FN(IERX_B),
- GPIO_FN(PENC1), GPIO_FN(TX3_D), GPIO_FN(CAN1_TX_B),
- GPIO_FN(TX5_D), GPIO_FN(IETX_B),
- GPIO_FN(TX0_A), GPIO_FN(HSPI_TX_A),
- GPIO_FN(RX0_A), GPIO_FN(HSPI_RX_A), GPIO_FN(RMII0_RXD0_A),
- GPIO_FN(ET0_ERXD6),
- GPIO_FN(SCK0_A), GPIO_FN(HSPI_CS_A), GPIO_FN(VI0_CLKENB),
- GPIO_FN(RMII0_TXD1_A), GPIO_FN(ET0_ERXD5),
- GPIO_FN(SCIF_CLK_A), GPIO_FN(HSPI_CLK_A), GPIO_FN(VI0_CLK),
- GPIO_FN(RMII0_TXD0_A), GPIO_FN(ET0_ERXD4),
- GPIO_FN(SDSELF), GPIO_FN(RTS1_E),
- GPIO_FN(SDA0), GPIO_FN(HIFEBL_A),
- GPIO_FN(SDA1), GPIO_FN(RX1_E),
- GPIO_FN(SCL1), GPIO_FN(SCIF_CLK_C),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("GPSR0", 0xFFFC0004, 32, 1, GROUP(
- GP_0_31_FN, FN_IP2_2_0,
- GP_0_30_FN, FN_IP1_31_29,
- GP_0_29_FN, FN_IP1_28_26,
- GP_0_28_FN, FN_IP1_25_23,
- GP_0_27_FN, FN_IP1_22_20,
- GP_0_26_FN, FN_IP1_19_18,
- GP_0_25_FN, FN_IP1_17_16,
- GP_0_24_FN, FN_IP0_5_4,
- GP_0_23_FN, FN_IP0_3_2,
- GP_0_22_FN, FN_IP0_1_0,
- GP_0_21_FN, FN_IP11_28,
- GP_0_20_FN, FN_IP1_7_6,
- GP_0_19_FN, FN_IP1_5_4,
- GP_0_18_FN, FN_IP1_3_2,
- GP_0_17_FN, FN_IP1_1_0,
- GP_0_16_FN, FN_IP0_31_30,
- GP_0_15_FN, FN_IP0_29_28,
- GP_0_14_FN, FN_IP0_27_26,
- GP_0_13_FN, FN_IP0_25_24,
- GP_0_12_FN, FN_IP0_23_22,
- GP_0_11_FN, FN_IP0_21_20,
- GP_0_10_FN, FN_IP0_19_18,
- GP_0_9_FN, FN_IP0_17_16,
- GP_0_8_FN, FN_IP0_15_14,
- GP_0_7_FN, FN_IP0_13_12,
- GP_0_6_FN, FN_IP0_11_10,
- GP_0_5_FN, FN_IP0_9_8,
- GP_0_4_FN, FN_IP0_7_6,
- GP_0_3_FN, FN_IP1_15_14,
- GP_0_2_FN, FN_IP1_13_12,
- GP_0_1_FN, FN_IP1_11_10,
- GP_0_0_FN, FN_IP1_9_8 ))
- },
- { PINMUX_CFG_REG("GPSR1", 0xFFFC0008, 32, 1, GROUP(
- GP_1_31_FN, FN_IP11_25_23,
- GP_1_30_FN, FN_IP2_13_11,
- GP_1_29_FN, FN_IP2_10_8,
- GP_1_28_FN, FN_IP2_7_5,
- GP_1_27_FN, FN_IP3_26_24,
- GP_1_26_FN, FN_IP3_23_21,
- GP_1_25_FN, FN_IP2_4_3,
- GP_1_24_FN, FN_WE1,
- GP_1_23_FN, FN_WE0,
- GP_1_22_FN, FN_IP3_19_18,
- GP_1_21_FN, FN_RD,
- GP_1_20_FN, FN_IP3_17_15,
- GP_1_19_FN, FN_IP3_14_12,
- GP_1_18_FN, FN_IP3_11_9,
- GP_1_17_FN, FN_IP3_8_6,
- GP_1_16_FN, FN_IP3_5_3,
- GP_1_15_FN, FN_EX_CS0,
- GP_1_14_FN, FN_IP3_2,
- GP_1_13_FN, FN_CS0,
- GP_1_12_FN, FN_BS,
- GP_1_11_FN, FN_CLKOUT,
- GP_1_10_FN, FN_IP3_1_0,
- GP_1_9_FN, FN_IP2_30_28,
- GP_1_8_FN, FN_IP2_27_25,
- GP_1_7_FN, FN_IP2_24_23,
- GP_1_6_FN, FN_IP2_22_20,
- GP_1_5_FN, FN_IP2_19_17,
- GP_1_4_FN, FN_IP2_16_14,
- GP_1_3_FN, FN_IP11_22_21,
- GP_1_2_FN, FN_IP11_20_19,
- GP_1_1_FN, FN_IP3_29_27,
- GP_1_0_FN, FN_IP3_20 ))
- },
- { PINMUX_CFG_REG("GPSR2", 0xFFFC000C, 32, 1, GROUP(
- GP_2_31_FN, FN_IP4_31_30,
- GP_2_30_FN, FN_IP5_2_0,
- GP_2_29_FN, FN_IP5_5_3,
- GP_2_28_FN, FN_IP5_8_6,
- GP_2_27_FN, FN_IP5_11_9,
- GP_2_26_FN, FN_IP5_14_12,
- GP_2_25_FN, FN_IP5_17_15,
- GP_2_24_FN, FN_IP5_20_18,
- GP_2_23_FN, FN_IP5_22_21,
- GP_2_22_FN, FN_IP5_24_23,
- GP_2_21_FN, FN_IP5_26_25,
- GP_2_20_FN, FN_IP4_29_28,
- GP_2_19_FN, FN_IP4_27_26,
- GP_2_18_FN, FN_IP4_25_24,
- GP_2_17_FN, FN_IP4_23_22,
- GP_2_16_FN, FN_IP4_21_20,
- GP_2_15_FN, FN_IP4_19_18,
- GP_2_14_FN, FN_IP4_17_15,
- GP_2_13_FN, FN_IP4_14_12,
- GP_2_12_FN, FN_IP4_11_9,
- GP_2_11_FN, FN_IP4_8_6,
- GP_2_10_FN, FN_IP4_5_3,
- GP_2_9_FN, FN_IP8_27_26,
- GP_2_8_FN, FN_IP11_12,
- GP_2_7_FN, FN_IP8_25_23,
- GP_2_6_FN, FN_IP8_22_20,
- GP_2_5_FN, FN_IP11_27_26,
- GP_2_4_FN, FN_IP8_29_28,
- GP_2_3_FN, FN_IP4_2_0,
- GP_2_2_FN, FN_IP11_11_10,
- GP_2_1_FN, FN_IP11_9_7,
- GP_2_0_FN, FN_IP11_6_4 ))
- },
- { PINMUX_CFG_REG("GPSR3", 0xFFFC0010, 32, 1, GROUP(
- GP_3_31_FN, FN_IP9_1_0,
- GP_3_30_FN, FN_IP8_19_18,
- GP_3_29_FN, FN_IP8_17_16,
- GP_3_28_FN, FN_IP8_15_14,
- GP_3_27_FN, FN_IP8_13_12,
- GP_3_26_FN, FN_IP8_11_10,
- GP_3_25_FN, FN_IP8_9_8,
- GP_3_24_FN, FN_IP8_7_6,
- GP_3_23_FN, FN_IP8_5_4,
- GP_3_22_FN, FN_IP8_3_2,
- GP_3_21_FN, FN_IP8_1_0,
- GP_3_20_FN, FN_IP7_30_29,
- GP_3_19_FN, FN_IP7_28_27,
- GP_3_18_FN, FN_IP7_26_24,
- GP_3_17_FN, FN_IP7_23_21,
- GP_3_16_FN, FN_IP7_20_18,
- GP_3_15_FN, FN_IP7_17_15,
- GP_3_14_FN, FN_IP7_14_12,
- GP_3_13_FN, FN_IP7_11_9,
- GP_3_12_FN, FN_IP7_8_6,
- GP_3_11_FN, FN_IP7_5_3,
- GP_3_10_FN, FN_IP7_2_0,
- GP_3_9_FN, FN_IP6_23_21,
- GP_3_8_FN, FN_IP6_20_18,
- GP_3_7_FN, FN_IP6_17_16,
- GP_3_6_FN, FN_IP6_15_14,
- GP_3_5_FN, FN_IP6_13_12,
- GP_3_4_FN, FN_IP6_11_10,
- GP_3_3_FN, FN_IP6_9_8,
- GP_3_2_FN, FN_IP6_7_6,
- GP_3_1_FN, FN_IP6_5_3,
- GP_3_0_FN, FN_IP6_2_0 ))
- },
-
- { PINMUX_CFG_REG("GPSR4", 0xFFFC0014, 32, 1, GROUP(
- GP_4_31_FN, FN_IP10_24_23,
- GP_4_30_FN, FN_IP10_22,
- GP_4_29_FN, FN_IP11_18_16,
- GP_4_28_FN, FN_USB_OVC0,
- GP_4_27_FN, FN_IP11_15_13,
- GP_4_26_FN, FN_PENC0,
- GP_4_25_FN, FN_IP11_2,
- GP_4_24_FN, FN_SCL0,
- GP_4_23_FN, FN_IP11_1,
- GP_4_22_FN, FN_IP11_0,
- GP_4_21_FN, FN_IP10_21_19,
- GP_4_20_FN, FN_IP10_18_16,
- GP_4_19_FN, FN_IP10_15,
- GP_4_18_FN, FN_IP10_14_12,
- GP_4_17_FN, FN_IP10_11_9,
- GP_4_16_FN, FN_IP10_8_6,
- GP_4_15_FN, FN_IP10_5_3,
- GP_4_14_FN, FN_IP10_2_0,
- GP_4_13_FN, FN_IP9_29_28,
- GP_4_12_FN, FN_IP9_27_26,
- GP_4_11_FN, FN_IP9_9_8,
- GP_4_10_FN, FN_IP9_7_6,
- GP_4_9_FN, FN_IP9_5_4,
- GP_4_8_FN, FN_IP9_3_2,
- GP_4_7_FN, FN_IP9_17_16,
- GP_4_6_FN, FN_IP9_15_14,
- GP_4_5_FN, FN_IP9_13_12,
- GP_4_4_FN, FN_IP9_11_10,
- GP_4_3_FN, FN_IP9_25_24,
- GP_4_2_FN, FN_IP9_23_22,
- GP_4_1_FN, FN_IP9_21_20,
- GP_4_0_FN, FN_IP9_19_18 ))
- },
- { PINMUX_CFG_REG_VAR("GPSR5", 0xFFFC0018, 32,
- GROUP(-20, 1, 1, -6, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_FN, FN_IP10_29_28,
- GP_5_10_FN, FN_IP10_27_26,
- /* GP5_9_4 RESERVED */
- GP_5_3_FN, FN_IRQ3_B,
- GP_5_2_FN, FN_IRQ2_B,
- GP_5_1_FN, FN_IP11_3,
- GP_5_0_FN, FN_IP10_25 ))
- },
-
- { PINMUX_CFG_REG_VAR("IPSR0", 0xFFFC001C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP0_31_30 [2] */
- FN_A15, FN_ST0_VCO_CLKIN, FN_LCD_DATA15_A,
- FN_TIOC3D_C,
- /* IP0_29_28 [2] */
- FN_A14, FN_LCD_DATA14_A, FN_TIOC3C_C, 0,
- /* IP0_27_26 [2] */
- FN_A13, FN_LCD_DATA13_A, FN_TIOC3B_C, 0,
- /* IP0_25_24 [2] */
- FN_A12, FN_LCD_DATA12_A, FN_TIOC3A_C, 0,
- /* IP0_23_22 [2] */
- FN_A11, FN_ST0_D7, FN_LCD_DATA11_A, FN_TIOC2B_C,
- /* IP0_21_20 [2] */
- FN_A10, FN_ST0_D6, FN_LCD_DATA10_A, FN_TIOC2A_C,
- /* IP0_19_18 [2] */
- FN_A9, FN_ST0_D5, FN_LCD_DATA9_A, FN_TIOC1B_C,
- /* IP0_17_16 [2] */
- FN_A8, FN_ST0_D4, FN_LCD_DATA8_A, FN_TIOC1A_C,
- /* IP0_15_14 [2] */
- FN_A7, FN_ST0_D3, FN_LCD_DATA7_A, FN_TIOC0D_C,
- /* IP0_13_12 [2] */
- FN_A6, FN_ST0_D2, FN_LCD_DATA6_A, FN_TIOC0C_C,
- /* IP0_11_10 [2] */
- FN_A5, FN_ST0_D1, FN_LCD_DATA5_A, FN_TIOC0B_C,
- /* IP0_9_8 [2] */
- FN_A4, FN_ST0_D0, FN_LCD_DATA4_A, FN_TIOC0A_C,
- /* IP0_7_6 [2] */
- FN_A3, FN_ST0_VLD, FN_LCD_DATA3_A, FN_TCLKD_C,
- /* IP0_5_4 [2] */
- FN_A2, FN_ST0_SYC, FN_LCD_DATA2_A, FN_TCLKC_C,
- /* IP0_3_2 [2] */
- FN_A1, FN_ST0_REQ, FN_LCD_DATA1_A, FN_TCLKB_C,
- /* IP0_1_0 [2] */
- FN_A0, FN_ST0_CLKIN, FN_LCD_DATA0_A, FN_TCLKA_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR1", 0xFFFC0020, 32,
- GROUP(3, 3, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* IP1_31_29 [3] */
- FN_D3, FN_SD0_DAT3_A, FN_MMC_D3_A, FN_ST1_D6,
- FN_FD3_A, 0, 0, 0,
- /* IP1_28_26 [3] */
- FN_D2, FN_SD0_DAT2_A, FN_MMC_D2_A, FN_ST1_D5,
- FN_FD2_A, 0, 0, 0,
- /* IP1_25_23 [3] */
- FN_D1, FN_SD0_DAT1_A, FN_MMC_D1_A, FN_ST1_D4,
- FN_FD1_A, 0, 0, 0,
- /* IP1_22_20 [3] */
- FN_D0, FN_SD0_DAT0_A, FN_MMC_D0_A, FN_ST1_D3,
- FN_FD0_A, 0, 0, 0,
- /* IP1_19_18 [2] */
- FN_A25, FN_TX2_D, FN_ST1_D2, 0,
- /* IP1_17_16 [2] */
- FN_A24, FN_RX2_D, FN_ST1_D1, 0,
- /* IP1_15_14 [2] */
- FN_A23, FN_ST1_D0, FN_LCD_M_DISP_A, 0,
- /* IP1_13_12 [2] */
- FN_A22, FN_ST1_VLD, FN_LCD_VEPWC_A, 0,
- /* IP1_11_10 [2] */
- FN_A21, FN_ST1_SYC, FN_LCD_VCPWC_A, 0,
- /* IP1_9_8 [2] */
- FN_A20, FN_ST1_REQ, FN_LCD_FLM_A, 0,
- /* IP1_7_6 [2] */
- FN_A19, FN_ST1_CLKIN, FN_LCD_CLK_A, FN_TIOC4D_C,
- /* IP1_5_4 [2] */
- FN_A18, FN_ST1_PWM, FN_LCD_CL2_A, FN_TIOC4C_C,
- /* IP1_3_2 [2] */
- FN_A17, FN_ST1_VCO_CLKIN, FN_LCD_CL1_A, FN_TIOC4B_C,
- /* IP1_1_0 [2] */
- FN_A16, FN_ST0_PWM, FN_LCD_DON_A, FN_TIOC4A_C ))
- },
- { PINMUX_CFG_REG_VAR("IPSR2", 0xFFFC0024, 32,
- GROUP(-1, 3, 3, 2, 3, 3, 3, 3, 3, 3, 2, 3),
- GROUP(
- /* IP2_31 [1] RESERVED */
- /* IP2_30_28 [3] */
- FN_D14, FN_TX2_B, 0, FN_FSE_A,
- FN_ET0_TX_CLK_B, 0, 0, 0,
- /* IP2_27_25 [3] */
- FN_D13, FN_RX2_B, 0, FN_FRB_A,
- FN_ET0_ETXD6_B, 0, 0, 0,
- /* IP2_24_23 [2] */
- FN_D12, 0, FN_FWE_A, FN_ET0_ETXD5_B,
- /* IP2_22_20 [3] */
- FN_D11, FN_RSPI_MISO_A, 0, FN_QMI_QIO1_A,
- FN_FRE_A, FN_ET0_ETXD3_B, 0, 0,
- /* IP2_19_17 [3] */
- FN_D10, FN_RSPI_MOSI_A, 0, FN_QMO_QIO0_A,
- FN_FALE_A, FN_ET0_ETXD2_B, 0, 0,
- /* IP2_16_14 [3] */
- FN_D9, FN_SD0_CMD_A, FN_MMC_CMD_A, FN_QIO3_A,
- FN_FCLE_A, FN_ET0_ETXD1_B, 0, 0,
- /* IP2_13_11 [3] */
- FN_D8, FN_SD0_CLK_A, FN_MMC_CLK_A, FN_QIO2_A,
- FN_FCE_A, FN_ET0_GTX_CLK_B, 0, 0,
- /* IP2_10_8 [3] */
- FN_D7, FN_RSPI_SSL_A, FN_MMC_D7_A, FN_QSSL_A,
- FN_FD7_A, 0, 0, 0,
- /* IP2_7_5 [3] */
- FN_D6, FN_RSPI_RSPCK_A, FN_MMC_D6_A, FN_QSPCLK_A,
- FN_FD6_A, 0, 0, 0,
- /* IP2_4_3 [2] */
- FN_D5, FN_SD0_WP_A, FN_MMC_D5_A, FN_FD5_A,
- /* IP2_2_0 [3] */
- FN_D4, FN_SD0_CD_A, FN_MMC_D4_A, FN_ST1_D7,
- FN_FD4_A, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR3", 0xFFFC0028, 32,
- GROUP(-2, 3, 3, 3, 1, 2, 3, 3, 3, 3, 3, 1, 2),
- GROUP(
- /* IP3_31_30 [2] RESERVED */
- /* IP3_29_27 [3] */
- FN_DRACK0, FN_SD1_DAT2_A, FN_ATAG, FN_TCLK1_A,
- FN_ET0_ETXD7, 0, 0, 0,
- /* IP3_26_24 [3] */
- FN_EX_WAIT2, FN_SD1_DAT1_A, FN_DACK2, FN_CAN1_RX_C,
- FN_ET0_MAGIC_C, FN_ET0_ETXD6_A, 0, 0,
- /* IP3_23_21 [3] */
- FN_EX_WAIT1, FN_SD1_DAT0_A, FN_DREQ2, FN_CAN1_TX_C,
- FN_ET0_LINK_C, FN_ET0_ETXD5_A, 0, 0,
- /* IP3_20 [1] */
- FN_EX_WAIT0, FN_TCLK1_B,
- /* IP3_19_18 [2] */
- FN_RD_WR, FN_TCLK0, FN_CAN_CLK_B, FN_ET0_ETXD4,
- /* IP3_17_15 [3] */
- FN_EX_CS5, FN_SD1_CMD_A, FN_ATADIR, FN_QSSL_B,
- FN_ET0_ETXD3_A, 0, 0, 0,
- /* IP3_14_12 [3] */
- FN_EX_CS4, FN_SD1_WP_A, FN_ATAWR, FN_QMI_QIO1_B,
- FN_ET0_ETXD2_A, 0, 0, 0,
- /* IP3_11_9 [3] */
- FN_EX_CS3, FN_SD1_CD_A, FN_ATARD, FN_QMO_QIO0_B,
- FN_ET0_ETXD1_A, 0, 0, 0,
- /* IP3_8_6 [3] */
- FN_EX_CS2, FN_TX3_B, FN_ATACS1, FN_QSPCLK_B,
- FN_ET0_GTX_CLK_A, 0, 0, 0,
- /* IP3_5_3 [3] */
- FN_EX_CS1, FN_RX3_B, FN_ATACS0, FN_QIO2_B,
- FN_ET0_ETXD0, 0, 0, 0,
- /* IP3_2 [1] */
- FN_CS1_A26, FN_QIO3_B,
- /* IP3_1_0 [2] */
- FN_D15, FN_SCK2_B, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR4", 0xFFFC002C, 32,
- GROUP(2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP4_31_30 [2] */
- 0, FN_SCK2_A, FN_VI0_G3, 0,
- /* IP4_29_28 [2] */
- 0, FN_RTS1_B, FN_VI0_G2, 0,
- /* IP4_27_26 [2] */
- 0, FN_CTS1_B, FN_VI0_DATA7_VI0_G1, 0,
- /* IP4_25_24 [2] */
- 0, FN_TX1_B, FN_VI0_DATA6_VI0_G0, FN_ET0_PHY_INT_A,
- /* IP4_23_22 [2] */
- 0, FN_RX1_B, FN_VI0_DATA5_VI0_B5, FN_ET0_MAGIC_A,
- /* IP4_21_20 [2] */
- 0, FN_SCK1_B, FN_VI0_DATA4_VI0_B4, FN_ET0_LINK_A,
- /* IP4_19_18 [2] */
- 0, FN_RTS0_B, FN_VI0_DATA3_VI0_B3, FN_ET0_MDIO_A,
- /* IP4_17_15 [3] */
- 0, FN_CTS0_B, FN_VI0_DATA2_VI0_B2, FN_RMII0_MDIO_A,
- FN_ET0_MDC, 0, 0, 0,
- /* IP4_14_12 [3] */
- FN_HTX0_A, FN_TX1_A, FN_VI0_DATA1_VI0_B1, FN_RMII0_MDC_A,
- FN_ET0_COL, 0, 0, 0,
- /* IP4_11_9 [3] */
- FN_HRX0_A, FN_RX1_A, FN_VI0_DATA0_VI0_B0, FN_RMII0_CRS_DV_A,
- FN_ET0_CRS, 0, 0, 0,
- /* IP4_8_6 [3] */
- FN_HSCK0_A, FN_SCK1_A, FN_VI0_VSYNC, FN_RMII0_RX_ER_A,
- FN_ET0_RX_ER, 0, 0, 0,
- /* IP4_5_3 [3] */
- FN_HRTS0_A, FN_RTS1_A, FN_VI0_HSYNC, FN_RMII0_TXD_EN_A,
- FN_ET0_RX_DV, 0, 0, 0,
- /* IP4_2_0 [3] */
- FN_HCTS0_A, FN_CTS1_A, FN_VI0_FIELD, FN_RMII0_RXD1_A,
- FN_ET0_ERXD7, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR5", 0xFFFC0030, 32,
- GROUP(-5, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP5_31_27 [5] RESERVED */
- /* IP5_26_25 [2] */
- FN_REF50CK, FN_CTS1_E, FN_HCTS0_D, 0,
- /* IP5_24_23 [2] */
- FN_REF125CK, FN_ADTRG, FN_RX5_C, 0,
- /* IP5_22_21 [2] */
- FN_SD2_WP_A, FN_TX5_A, FN_VI0_R5, 0,
- /* IP5_20_18 [3] */
- FN_SD2_CD_A, FN_RX5_A, FN_VI0_R4, 0,
- 0, 0, 0, FN_ET0_PHY_INT_B,
- /* IP5_17_15 [3] */
- FN_SD2_DAT3_A, FN_TX4_A, FN_VI0_R3, 0,
- 0, 0, 0, FN_ET0_MAGIC_B,
- /* IP5_14_12 [3] */
- FN_SD2_DAT2_A, FN_RX4_A, FN_VI0_R2, 0,
- 0, 0, 0, FN_ET0_LINK_B,
- /* IP5_11_9 [3] */
- FN_SD2_DAT1_A, FN_TX3_A, FN_VI0_R1, 0,
- 0, 0, 0, FN_ET0_MDIO_B,
- /* IP5_8_6 [3] */
- FN_SD2_DAT0_A, FN_RX3_A, FN_VI0_R0, 0,
- 0, 0, 0, FN_ET0_ERXD3_B,
- /* IP5_5_3 [3] */
- FN_SD2_CMD_A, FN_TX2_A, FN_VI0_G5, 0,
- 0, 0, 0, FN_ET0_ERXD2_B,
- /* IP5_2_0 [3] */
- FN_SD2_CLK_A, FN_RX2_A, FN_VI0_G4, 0,
- FN_ET0_RX_CLK_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR6", 0xFFFC0034, 32,
- GROUP(-8, 3, 3, 2, 2, 2, 2, 2, 2, 3, 3),
- GROUP(
- /* IP5_31_24 [8] RESERVED */
- /* IP6_23_21 [3] */
- FN_DU0_DG1, FN_CTS1_C, FN_HRTS0_D, FN_TIOC1B_A,
- FN_HIFD09, 0, 0, 0,
- /* IP6_20_18 [3] */
- FN_DU0_DG0, FN_TX1_C, FN_HSCK0_D, FN_IECLK_A,
- FN_TIOC1A_A, FN_HIFD08, 0, 0,
- /* IP6_17_16 [2] */
- FN_DU0_DR7, FN_RX1_C, FN_TIOC0D_A, FN_HIFD07,
- /* IP6_15_14 [2] */
- FN_DU0_DR6, FN_SCK1_C, FN_TIOC0C_A, FN_HIFD06,
- /* IP6_13_12 [2] */
- FN_DU0_DR5, FN_RTS0_C, FN_TIOC0B_A, FN_HIFD05,
- /* IP6_11_10 [2] */
- FN_DU0_DR4, FN_CTS0_C, FN_TIOC0A_A, FN_HIFD04,
- /* IP6_9_8 [2] */
- FN_DU0_DR3, FN_TX0_B, FN_TCLKD_A, FN_HIFD03,
- /* IP6_7_6 [2] */
- FN_DU0_DR2, FN_RX0_B, FN_TCLKC_A, FN_HIFD02,
- /* IP6_5_3 [3] */
- FN_DU0_DR1, FN_SCK0_B, FN_HTX0_D, FN_IERX_A,
- FN_TCLKB_A, FN_HIFD01, 0, 0,
- /* IP6_2_0 [3] */
- FN_DU0_DR0, FN_SCIF_CLK_B, FN_HRX0_D, FN_IETX_A,
- FN_TCLKA_A, FN_HIFD00, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR7", 0xFFFC0038, 32,
- GROUP(-1, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, 3),
- GROUP(
- /* IP7_31 [1] RESERVED */
- /* IP7_30_29 [2] */
- FN_DU0_DB4, 0, FN_HIFINT, 0,
- /* IP7_28_27 [2] */
- FN_DU0_DB3, FN_TX5_B, FN_TIOC4D_A, FN_HIFRD,
- /* IP7_26_24 [3] */
- FN_DU0_DB2, FN_RX5_B, FN_RMII0_TXD1_B, FN_TIOC4C_A,
- FN_HIFWR, 0, 0, 0,
- /* IP7_23_21 [3] */
- FN_DU0_DB1, FN_TX4_C, FN_RMII0_TXD0_B, FN_TIOC4B_A,
- FN_HIFRS, 0, 0, 0,
- /* IP7_20_18 [3] */
- FN_DU0_DB0, FN_RX4_C, FN_RMII0_TXD_EN_B, FN_TIOC4A_A,
- FN_HIFCS, 0, 0, 0,
- /* IP7_17_15 [3] */
- FN_DU0_DG7, FN_TX3_C, FN_RMII0_RXD1_B, FN_TIOC3D_A,
- FN_HIFD15, 0, 0, 0,
- /* IP7_14_12 [3] */
- FN_DU0_DG6, FN_RX3_C, FN_RMII0_RXD0_B, FN_TIOC3C_A,
- FN_HIFD14, 0, 0, 0,
- /* IP7_11_9 [3] */
- FN_DU0_DG5, FN_TX2_C, FN_RMII0_RX_ER_B, FN_TIOC3B_A,
- FN_HIFD13, 0, 0, 0,
- /* IP7_8_6 [3] */
- FN_DU0_DG4, FN_RX2_C, FN_RMII0_CRS_DV_B, FN_TIOC3A_A,
- FN_HIFD12, 0, 0, 0,
- /* IP7_5_3 [3] */
- FN_DU0_DG3, FN_SCK2_C, FN_RMII0_MDIO_B, FN_TIOC2B_A,
- FN_HIFD11, 0, 0, 0,
- /* IP7_2_0 [3] */
- FN_DU0_DG2, FN_RTS1_C, FN_RMII0_MDC_B, FN_TIOC2A_A,
- FN_HIFD10, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR8", 0xFFFC003C, 32,
- GROUP(-2, 2, 2, 3, 3, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP8_29_28 [2] */
- FN_IRQ3_A, FN_RTS0_A, FN_HRTS0_B, FN_ET0_ERXD3_A,
- /* IP8_27_26 [2] */
- FN_IRQ2_A, FN_CTS0_A, FN_HCTS0_B, FN_ET0_ERXD2_A,
- /* IP8_25_23 [3] */
- FN_IRQ1_A, 0, FN_HSPI_RX_B, FN_TX3_E,
- FN_ET0_ERXD1, 0, 0, 0,
- /* IP8_22_20 [3] */
- FN_IRQ0_A, 0, FN_HSPI_TX_B, FN_RX3_E,
- FN_ET0_ERXD0, 0, 0, 0,
- /* IP8_19_18 [2] */
- FN_DU0_CDE, FN_HTX0_B, FN_AUDIO_CLKB_B, FN_LCD_VCPWC_B,
- /* IP8_17_16 [2] */
- FN_DU0_DISP, FN_CAN0_TX_B, FN_HRX0_B, FN_AUDIO_CLKA_B,
- /* IP8_15_14 [2] */
- FN_DU0_EXODDF_DU0_ODDF, FN_CAN0_RX_B, FN_HSCK0_B,
- FN_SSI_SDATA1_B,
- /* IP8_13_12 [2] */
- FN_DU0_EXVSYNC_DU0_VSYNC, 0, FN_HSPI_RX0_C, FN_SSI_WS1_B,
- /* IP8_11_10 [2] */
- FN_DU0_EXHSYNC_DU0_HSYNC, 0, FN_HSPI_TX0_C, FN_SSI_SCK1_B,
- /* IP8_9_8 [2] */
- FN_DU0_DOTCLKOUT, 0, FN_HSPI_CLK0_C, FN_SSI_SDATA0_B,
- /* IP8_7_6 [2] */
- FN_DU0_DOTCLKIN, 0, FN_HSPI_CS0_C, FN_SSI_WS0_B,
- /* IP8_5_4 [2] */
- FN_DU0_DB7, 0, FN_SSI_SCK0_B, FN_HIFEBL_B,
- /* IP8_3_2 [2] */
- FN_DU0_DB6, 0, FN_HIFRDY, 0,
- /* IP8_1_0 [2] */
- FN_DU0_DB5, 0, FN_HIFDREQ, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR9", 0xFFFC0040, 32,
- GROUP(-2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP9_29_28 [2] */
- FN_SSI_SDATA1_A, FN_VI1_3_B, FN_LCD_DATA14_B, 0,
- /* IP9_27_26 [2] */
- FN_SSI_WS1_A, FN_VI1_2_B, FN_LCD_DATA13_B, 0,
- /* IP9_25_24 [2] */
- FN_SSI_SCK1_A, FN_VI1_1_B, FN_TIOC2B_B, FN_LCD_DATA12_B,
- /* IP9_23_22 [2] */
- FN_SSI_SDATA0_A, FN_VI1_0_B, FN_TIOC2A_B, FN_LCD_DATA11_B,
- /* IP9_21_20 [2] */
- FN_SSI_WS0_A, FN_TIOC1B_B, FN_LCD_DATA10_B, 0,
- /* IP9_19_18 [2] */
- FN_SSI_SCK0_A, FN_TIOC1A_B, FN_LCD_DATA9_B, 0,
- /* IP9_17_16 [2] */
- FN_VI1_7_A, FN_FCE_B, FN_LCD_DATA8_B, 0,
- /* IP9_15_14 [2] */
- FN_VI1_6_A, 0, FN_FD7_B, FN_LCD_DATA7_B,
- /* IP9_13_12 [2] */
- FN_VI1_5_A, 0, FN_FD6_B, FN_LCD_DATA6_B,
- /* IP9_11_10 [2] */
- FN_VI1_4_A, 0, FN_FD5_B, FN_LCD_DATA5_B,
- /* IP9_9_8 [2] */
- FN_VI1_3_A, 0, FN_FD4_B, FN_LCD_DATA4_B,
- /* IP9_7_6 [2] */
- FN_VI1_2_A, 0, FN_FD3_B, FN_LCD_DATA3_B,
- /* IP9_5_4 [2] */
- FN_VI1_1_A, 0, FN_FD2_B, FN_LCD_DATA2_B,
- /* IP9_3_2 [2] */
- FN_VI1_0_A, 0, FN_FD1_B, FN_LCD_DATA1_B,
- /* IP9_1_0 [2] */
- FN_VI1_CLK_A, 0, FN_FD0_B, FN_LCD_DATA0_B ))
- },
- { PINMUX_CFG_REG_VAR("IPSR10", 0xFFFC0044, 32,
- GROUP(-2, 2, 2, 1, 2, 1, 3, 3, 1, 3, 3, 3, 3, 3),
- GROUP(
- /* IP9_31_30 [2] RESERVED */
- /* IP10_29_28 [2] */
- FN_CAN1_TX_A, FN_TX5_C, FN_MLB_DAT, 0,
- /* IP10_27_26 [2] */
- FN_CAN0_RX_A, FN_IRQ0_B, FN_MLB_SIG, 0,
- /* IP10_25 [1] */
- FN_CAN1_RX_A, FN_IRQ1_B,
- /* IP10_24_23 [2] */
- FN_CAN0_TX_A, FN_TX4_D, FN_MLB_CLK, 0,
- /* IP10_22 [1] */
- FN_CAN_CLK_A, FN_RX4_D,
- /* IP10_21_19 [3] */
- FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,
- FN_LCD_M_DISP_B, 0, 0,
- /* IP10_18_16 [3] */
- FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
- FN_LCD_VEPWC_B, 0, 0,
- /* IP10_15 [1] */
- FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
- /* IP10_14_12 [3] */
- FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
- FN_LCD_FLM_B, 0, 0, 0,
- /* IP10_11_9 [3] */
- FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
- FN_LCD_CL2_B, 0, 0,
- /* IP10_8_6 [3] */
- FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
- FN_LCD_CL1_B, 0, 0,
- /* IP10_5_3 [3] */
- FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
- FN_LCD_DON_B, 0, 0,
- /* IP10_2_0 [3] */
- FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B,
- FN_LCD_DATA15_B, 0, 0, 0 ))
- },
- { PINMUX_CFG_REG_VAR("IPSR11", 0xFFFC0048, 32,
- GROUP(-3, 1, 2, 3, 2, 2, 3, 3, 1, 2, 3, 3,
- 1, 1, 1, 1),
- GROUP(
- /* IP11_31_29 [3] RESERVED */
- /* IP11_28 [1] */
- FN_PRESETOUT, FN_ST_CLKOUT,
- /* IP11_27_26 [2] */
- FN_DACK1, FN_HSPI_CS_B, FN_TX4_B, FN_ET0_RX_CLK_A,
- /* IP11_25_23 [3] */
- FN_DREQ1, FN_HSPI_CLK_B, FN_RX4_B, FN_ET0_PHY_INT_C,
- FN_ET0_TX_CLK_A, 0, 0, 0,
- /* IP11_22_21 [2] */
- FN_DACK0, FN_SD1_DAT3_A, FN_ET0_TX_ER, 0,
- /* IP11_20_19 [2] */
- FN_DREQ0, FN_SD1_CLK_A, FN_ET0_TX_EN, 0,
- /* IP11_18_16 [3] */
- FN_USB_OVC1, FN_RX3_D, FN_CAN1_RX_B, FN_RX5_D,
- FN_IERX_B, 0, 0, 0,
- /* IP11_15_13 [3] */
- FN_PENC1, FN_TX3_D, FN_CAN1_TX_B, FN_TX5_D,
- FN_IETX_B, 0, 0, 0,
- /* IP11_12 [1] */
- FN_TX0_A, FN_HSPI_TX_A,
- /* IP11_11_10 [2] */
- FN_RX0_A, FN_HSPI_RX_A, FN_RMII0_RXD0_A, FN_ET0_ERXD6,
- /* IP11_9_7 [3] */
- FN_SCK0_A, FN_HSPI_CS_A, FN_VI0_CLKENB, FN_RMII0_TXD1_A,
- FN_ET0_ERXD5, 0, 0, 0,
- /* IP11_6_4 [3] */
- FN_SCIF_CLK_A, FN_HSPI_CLK_A, FN_VI0_CLK, FN_RMII0_TXD0_A,
- FN_ET0_ERXD4, 0, 0, 0,
- /* IP11_3 [1] */
- FN_SDSELF, FN_RTS1_E,
- /* IP11_2 [1] */
- FN_SDA0, FN_HIFEBL_A,
- /* IP11_1 [1] */
- FN_SDA1, FN_RX1_E,
- /* IP11_0 [1] */
- FN_SCL1, FN_SCIF_CLK_C ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL1", 0xFFFC004C, 32,
- GROUP(-3, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 2,
- 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* SEL1_31_29 [3] RESERVED */
- /* SEL1_28 [1] */
- FN_SEL_IEBUS_0, FN_SEL_IEBUS_1,
- /* SEL1_27 [1] */
- FN_SEL_RQSPI_0, FN_SEL_RQSPI_1,
- /* SEL1_26 [1] */
- FN_SEL_VIN1_0, FN_SEL_VIN1_1,
- /* SEL1_25 [1] */
- FN_SEL_HIF_0, FN_SEL_HIF_1,
- /* SEL1_24 [1] */
- FN_SEL_RSPI_0, FN_SEL_RSPI_1,
- /* SEL1_23 [1] */
- FN_SEL_LCDC_0, FN_SEL_LCDC_1,
- /* SEL1_22_21 [2] */
- FN_SEL_ET0_CTL_0, FN_SEL_ET0_CTL_1, FN_SEL_ET0_CTL_2, 0,
- /* SEL1_20 [1] */
- FN_SEL_ET0_0, FN_SEL_ET0_1,
- /* SEL1_19 [1] */
- FN_SEL_RMII_0, FN_SEL_RMII_1,
- /* SEL1_18 [1] */
- FN_SEL_TMU_0, FN_SEL_TMU_1,
- /* SEL1_17_16 [2] */
- FN_SEL_HSPI_0, FN_SEL_HSPI_1, FN_SEL_HSPI_2, 0,
- /* SEL1_15_14 [2] */
- FN_SEL_HSCIF_0, FN_SEL_HSCIF_1, FN_SEL_HSCIF_2, FN_SEL_HSCIF_3,
- /* SEL1_13 [1] */
- FN_SEL_RCAN_CLK_0, FN_SEL_RCAN_CLK_1,
- /* SEL1_12_11 [2] */
- FN_SEL_RCAN1_0, FN_SEL_RCAN1_1, FN_SEL_RCAN1_2, 0,
- /* SEL1_10 [1] */
- FN_SEL_RCAN0_0, FN_SEL_RCAN0_1,
- /* SEL1_9 [1] */
- FN_SEL_SDHI2_0, FN_SEL_SDHI2_1,
- /* SEL1_8 [1] */
- FN_SEL_SDHI1_0, FN_SEL_SDHI1_1,
- /* SEL1_7 [1] */
- FN_SEL_SDHI0_0, FN_SEL_SDHI0_1,
- /* SEL1_6 [1] */
- FN_SEL_SSI1_0, FN_SEL_SSI1_1,
- /* SEL1_5 [1] */
- FN_SEL_SSI0_0, FN_SEL_SSI0_1,
- /* SEL1_4 [1] */
- FN_SEL_AUDIO_CLKB_0, FN_SEL_AUDIO_CLKB_1,
- /* SEL1_3 [1] */
- FN_SEL_AUDIO_CLKA_0, FN_SEL_AUDIO_CLKA_1,
- /* SEL1_2 [1] */
- FN_SEL_FLCTL_0, FN_SEL_FLCTL_1,
- /* SEL1_1 [1] */
- FN_SEL_MMC_0, FN_SEL_MMC_1,
- /* SEL1_0 [1] */
- FN_SEL_INTC_0, FN_SEL_INTC_1 ))
- },
- { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xFFFC0050, 32,
- GROUP(-8, 1, 1, 1, 2, 2, 1, 2, 2, 3, 2, 3, 2, 2),
- GROUP(
- /* SEL2_31_24 [8] RESERVED */
- /* SEL2_23 [1] */
- FN_SEL_MTU2_CLK_0, FN_SEL_MTU2_CLK_1,
- /* SEL2_22 [1] */
- FN_SEL_MTU2_CH4_0, FN_SEL_MTU2_CH4_1,
- /* SEL2_21 [1] */
- FN_SEL_MTU2_CH3_0, FN_SEL_MTU2_CH3_1,
- /* SEL2_20_19 [2] */
- FN_SEL_MTU2_CH2_0, FN_SEL_MTU2_CH2_1, FN_SEL_MTU2_CH2_2, 0,
- /* SEL2_18_17 [2] */
- FN_SEL_MTU2_CH1_0, FN_SEL_MTU2_CH1_1, FN_SEL_MTU2_CH1_2, 0,
- /* SEL2_16 [1] */
- FN_SEL_MTU2_CH0_0, FN_SEL_MTU2_CH0_1,
- /* SEL2_15_14 [2] */
- FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
- /* SEL2_13_12 [2] */
- FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
- /* SEL2_11_9 [3] */
- FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
- FN_SEL_SCIF3_4, 0, 0, 0,
- /* SEL2_8_7 [2] */
- FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
- /* SEL2_6_4 [3] */
- FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, FN_SEL_SCIF1_3,
- FN_SEL_SCIF1_4, 0, 0, 0,
- /* SEL2_3_2 [2] */
- FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, 0,
- /* SEL2_1_0 [2] */
- FN_SEL_SCIF_CLK_0, FN_SEL_SCIF_CLK_1, FN_SEL_SCIF_CLK_2, 0 ))
- },
- /* GPIO 0 - 5*/
- { PINMUX_CFG_REG("INOUTSEL0", 0xFFC40004, 32, 1, GROUP(GP_INOUTSEL(0)))
- },
- { PINMUX_CFG_REG("INOUTSEL1", 0xFFC41004, 32, 1, GROUP(GP_INOUTSEL(1)))
- },
- { PINMUX_CFG_REG("INOUTSEL2", 0xFFC42004, 32, 1, GROUP(GP_INOUTSEL(2)))
- },
- { PINMUX_CFG_REG("INOUTSEL3", 0xFFC43004, 32, 1, GROUP(GP_INOUTSEL(3)))
- },
- { PINMUX_CFG_REG("INOUTSEL4", 0xFFC44004, 32, 1, GROUP(GP_INOUTSEL(4)))
- },
- { PINMUX_CFG_REG_VAR("INOUTSEL5", 0xffc45004, 32,
- GROUP(-20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
- GROUP(
- /* GP5_31_12 RESERVED */
- GP_5_11_IN, GP_5_11_OUT,
- GP_5_10_IN, GP_5_10_OUT,
- GP_5_9_IN, GP_5_9_OUT,
- GP_5_8_IN, GP_5_8_OUT,
- GP_5_7_IN, GP_5_7_OUT,
- GP_5_6_IN, GP_5_6_OUT,
- GP_5_5_IN, GP_5_5_OUT,
- GP_5_4_IN, GP_5_4_OUT,
- GP_5_3_IN, GP_5_3_OUT,
- GP_5_2_IN, GP_5_2_OUT,
- GP_5_1_IN, GP_5_1_OUT,
- GP_5_0_IN, GP_5_0_OUT ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- /* GPIO 0 - 5*/
- { PINMUX_DATA_REG("INDT0", 0xFFC4000C, 32, GROUP(GP_INDT(0))) },
- { PINMUX_DATA_REG("INDT1", 0xFFC4100C, 32, GROUP(GP_INDT(1))) },
- { PINMUX_DATA_REG("INDT2", 0xFFC4200C, 32, GROUP(GP_INDT(2))) },
- { PINMUX_DATA_REG("INDT3", 0xFFC4300C, 32, GROUP(GP_INDT(3))) },
- { PINMUX_DATA_REG("INDT4", 0xFFC4400C, 32, GROUP(GP_INDT(4))) },
- { PINMUX_DATA_REG("INDT5", 0xFFC4500C, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0,
- GP_5_11_DATA, GP_5_10_DATA, GP_5_9_DATA, GP_5_8_DATA,
- GP_5_7_DATA, GP_5_6_DATA, GP_5_5_DATA, GP_5_4_DATA,
- GP_5_3_DATA, GP_5_2_DATA, GP_5_1_DATA, GP_5_0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7734_pinmux_info = {
- .name = "sh7734_pfc",
-
- .unlock_reg = 0xFFFC0000,
-
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7757.c b/drivers/pinctrl/renesas/pfc-sh7757.c
deleted file mode 100644
index 0d7857d7efefb4..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7757.c
+++ /dev/null
@@ -1,2219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7757 (B0 step) Pinmux
- *
- * Copyright (C) 2009-2010 Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Based on SH7723 Pinmux
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7757.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA,
- PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
- PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
- PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA,
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
- PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
- PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
- PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
- PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
- PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
- PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
- PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
- PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
- PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
- PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
- PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
- PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
- PTG7_IN, PTG6_IN, PTG5_IN, PTG4_IN,
- PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
- PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
- PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
- PTI7_IN, PTI6_IN, PTI5_IN, PTI4_IN,
- PTI3_IN, PTI2_IN, PTI1_IN, PTI0_IN,
- PTJ6_IN, PTJ5_IN, PTJ4_IN,
- PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
- PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
- PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
- PTL6_IN, PTL5_IN, PTL4_IN,
- PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
- PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
- PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
- PTN6_IN, PTN5_IN, PTN4_IN,
- PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
- PTO7_IN, PTO6_IN, PTO5_IN, PTO4_IN,
- PTO3_IN, PTO2_IN, PTO1_IN, PTO0_IN,
- PTP7_IN, PTP6_IN, PTP5_IN, PTP4_IN,
- PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
- PTQ6_IN, PTQ5_IN, PTQ4_IN,
- PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
- PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
- PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
- PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
- PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
- PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
- PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
- PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
- PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
- PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
- PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
- PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
- PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
- PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
- PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
- PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
- PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
- PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
- PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
- PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
- PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
- PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
- PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
- PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
- PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
- PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
- PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
- PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
- PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
- PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
- PTG7_OUT, PTG6_OUT, PTG5_OUT, PTG4_OUT,
- PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
- PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
- PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
- PTI7_OUT, PTI6_OUT, PTI5_OUT, PTI4_OUT,
- PTI3_OUT, PTI2_OUT, PTI1_OUT, PTI0_OUT,
- PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
- PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
- PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
- PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
- PTL6_OUT, PTL5_OUT, PTL4_OUT,
- PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
- PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
- PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
- PTN6_OUT, PTN5_OUT, PTN4_OUT,
- PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
- PTO7_OUT, PTO6_OUT, PTO5_OUT, PTO4_OUT,
- PTO3_OUT, PTO2_OUT, PTO1_OUT, PTO0_OUT,
- PTP7_OUT, PTP6_OUT, PTP5_OUT, PTP4_OUT,
- PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
- PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
- PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
- PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
- PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
- PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
- PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
- PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
- PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
- PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
- PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
- PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
- PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
- PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
- PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
- PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
- PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
- PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
- PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
- PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
- PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
- PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
- PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
- PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
- PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
- PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
- PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
- PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
- PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
- PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
- PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
- PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
- PTG7_FN, PTG6_FN, PTG5_FN, PTG4_FN,
- PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
- PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
- PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
- PTI7_FN, PTI6_FN, PTI5_FN, PTI4_FN,
- PTI3_FN, PTI2_FN, PTI1_FN, PTI0_FN,
- PTJ6_FN, PTJ5_FN, PTJ4_FN,
- PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
- PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
- PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
- PTL6_FN, PTL5_FN, PTL4_FN,
- PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
- PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
- PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
- PTN6_FN, PTN5_FN, PTN4_FN,
- PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
- PTO7_FN, PTO6_FN, PTO5_FN, PTO4_FN,
- PTO3_FN, PTO2_FN, PTO1_FN, PTO0_FN,
- PTP7_FN, PTP6_FN, PTP5_FN, PTP4_FN,
- PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
- PTQ6_FN, PTQ5_FN, PTQ4_FN,
- PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
- PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
- PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
- PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
- PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
- PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
- PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
- PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
- PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
- PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
- PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
- PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
- PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
- PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
- PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
- PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
- PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
- PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
- PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
-
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
-
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- PS1_2_FN1, PS1_2_FN2,
-
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- PS2_2_FN1, PS2_2_FN2,
-
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
-
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2,
-
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
-
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2,
-
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- PS7_4_FN1, PS7_4_FN2,
-
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- /* PTA (mobule: LBSC, RGMII) */
- BS_MARK, RDWR_MARK, WE1_MARK, RDY_MARK,
- ET0_MDC_MARK, ET0_MDIO_MARK, ET1_MDC_MARK, ET1_MDIO_MARK,
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- IRQ15_MARK, IRQ14_MARK, IRQ13_MARK, IRQ12_MARK,
- IRQ11_MARK, IRQ10_MARK, IRQ9_MARK, IRQ8_MARK,
- ON_NRE_MARK, ON_NWE_MARK, ON_NWP_MARK, ON_NCE0_MARK,
- ON_R_B0_MARK, ON_ALE_MARK, ON_CLE_MARK, TCLK_MARK,
-
- /* PTC (mobule: IRQ, PWMU) */
- IRQ7_MARK, IRQ6_MARK, IRQ5_MARK, IRQ4_MARK,
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
- PWMU0_MARK, PWMU1_MARK, PWMU2_MARK, PWMU3_MARK,
- PWMU4_MARK, PWMU5_MARK,
-
- /* PTD (mobule: SPI0, DMAC) */
- SP0_MOSI_MARK, SP0_MISO_MARK, SP0_SCK_MARK, SP0_SCK_FB_MARK,
- SP0_SS0_MARK, SP0_SS1_MARK, SP0_SS2_MARK, SP0_SS3_MARK,
- DREQ0_MARK, DACK0_MARK, TEND0_MARK,
-
- /* PTE (mobule: RMII) */
- RMII0_CRS_DV_MARK, RMII0_TXD1_MARK,
- RMII0_TXD0_MARK, RMII0_TXEN_MARK,
- RMII0_REFCLK_MARK, RMII0_RXD1_MARK,
- RMII0_RXD0_MARK, RMII0_RX_ER_MARK,
-
- /* PTF (mobule: RMII, SerMux) */
- RMII1_CRS_DV_MARK, RMII1_TXD1_MARK,
- RMII1_TXD0_MARK, RMII1_TXEN_MARK,
- RMII1_REFCLK_MARK, RMII1_RXD1_MARK,
- RMII1_RXD0_MARK, RMII1_RX_ER_MARK,
- RAC_RI_MARK,
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- BOOTFMS_MARK, BOOTWP_MARK, A25_MARK, A24_MARK,
- SERIRQ_MARK, WDTOVF_MARK, LPCPD_MARK, LDRQ_MARK,
- MMCCLK_MARK, MMCCMD_MARK,
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- SP1_MOSI_MARK, SP1_MISO_MARK, SP1_SCK_MARK, SP1_SCK_FB_MARK,
- SP1_SS0_MARK, SP1_SS1_MARK, WP_MARK, FMS0_MARK,
- TEND1_MARK, DREQ1_MARK, DACK1_MARK, ADTRG1_MARK,
- ADTRG0_MARK,
-
- /* PTI (mobule: LBSC, SDHI) */
- D15_MARK, D14_MARK, D13_MARK, D12_MARK,
- D11_MARK, D10_MARK, D9_MARK, D8_MARK,
- SD_WP_MARK, SD_CD_MARK, SD_CLK_MARK, SD_CMD_MARK,
- SD_D3_MARK, SD_D2_MARK, SD_D1_MARK, SD_D0_MARK,
-
- /* PTJ (mobule: SCIF234) */
- RTS3_MARK, CTS3_MARK, TXD3_MARK, RXD3_MARK,
- RTS4_MARK, RXD4_MARK, TXD4_MARK,
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- COM2_TXD_MARK, COM2_RXD_MARK, COM2_RTS_MARK, COM2_CTS_MARK,
- COM2_DTR_MARK, COM2_DSR_MARK, COM2_DCD_MARK, CLKOUT_MARK,
- SCK2_MARK, SCK4_MARK, SCK3_MARK,
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- RAC_RXD_MARK, RAC_RTS_MARK, RAC_CTS_MARK, RAC_DTR_MARK,
- RAC_DSR_MARK, RAC_DCD_MARK, RAC_TXD_MARK, RXD2_MARK,
- CS5_MARK, CS6_MARK, AUDSYNC_MARK, AUDCK_MARK,
- TXD2_MARK,
-
- /* PTM (mobule: LBSC, IIC) */
- CS4_MARK, RD_MARK, WE0_MARK, CS0_MARK,
- SDA6_MARK, SCL6_MARK, SDA7_MARK, SCL7_MARK,
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- VBUS_EN_MARK, VBUS_OC_MARK, JMCTCK_MARK, JMCTMS_MARK,
- JMCTDO_MARK, JMCTDI_MARK, JMCTRST_MARK,
- SGPIO1_CLK_MARK, SGPIO1_LOAD_MARK, SGPIO1_DI_MARK,
- SGPIO1_DO_MARK, SUB_CLKIN_MARK,
-
- /* PTO (mobule: SGPIO, SerMux) */
- SGPIO0_CLK_MARK, SGPIO0_LOAD_MARK, SGPIO0_DI_MARK,
- SGPIO0_DO_MARK, SGPIO2_CLK_MARK, SGPIO2_LOAD_MARK,
- SGPIO2_DI_MARK, SGPIO2_DO_MARK,
- COM1_TXD_MARK, COM1_RXD_MARK, COM1_RTS_MARK, COM1_CTS_MARK,
-
- /* PTQ (mobule: LPC) */
- LAD3_MARK, LAD2_MARK, LAD1_MARK, LAD0_MARK,
- LFRAME_MARK, LRESET_MARK, LCLK_MARK,
-
- /* PTR (mobule: GRA, IIC) */
- DDC3_MARK, DDC2_MARK, SDA2_MARK, SCL2_MARK,
- SDA1_MARK, SCL1_MARK, SDA0_MARK, SCL0_MARK,
- SDA8_MARK, SCL8_MARK,
-
- /* PTS (mobule: GRA, IIC) */
- DDC1_MARK, DDC0_MARK, SDA5_MARK, SCL5_MARK,
- SDA4_MARK, SCL4_MARK, SDA3_MARK, SCL3_MARK,
- SDA9_MARK, SCL9_MARK,
-
- /* PTT (mobule: PWMX, AUD) */
- PWMX7_MARK, PWMX6_MARK, PWMX5_MARK, PWMX4_MARK,
- PWMX3_MARK, PWMX2_MARK, PWMX1_MARK, PWMX0_MARK,
- AUDATA3_MARK, AUDATA2_MARK, AUDATA1_MARK, AUDATA0_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- /* PTU (mobule: LPC, APM) */
- LGPIO7_MARK, LGPIO6_MARK, LGPIO5_MARK, LGPIO4_MARK,
- LGPIO3_MARK, LGPIO2_MARK, LGPIO1_MARK, LGPIO0_MARK,
- APMONCTL_O_MARK, APMPWBTOUT_O_MARK, APMSCI_O_MARK,
- APMVDDON_MARK, APMSLPBTN_MARK, APMPWRBTN_MARK, APMS5N_MARK,
- APMS3N_MARK,
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- A23_MARK, A22_MARK, A21_MARK, A20_MARK,
- A19_MARK, A18_MARK, A17_MARK, A16_MARK,
- COM2_RI_MARK, R_SPI_MOSI_MARK, R_SPI_MISO_MARK,
- R_SPI_RSPCK_MARK, R_SPI_SSL0_MARK, R_SPI_SSL1_MARK,
- EVENT7_MARK, EVENT6_MARK, VBIOS_DI_MARK, VBIOS_DO_MARK,
- VBIOS_CLK_MARK, VBIOS_CS_MARK,
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- A15_MARK, A14_MARK, A13_MARK, A12_MARK,
- A11_MARK, A10_MARK, A9_MARK, A8_MARK,
- EVENT5_MARK, EVENT4_MARK, EVENT3_MARK, EVENT2_MARK,
- EVENT1_MARK, EVENT0_MARK, CTS4_MARK, CTS2_MARK,
-
- /* PTX (mobule: LBSC, SCIF, SIM) */
- A7_MARK, A6_MARK, A5_MARK, A4_MARK,
- A3_MARK, A2_MARK, A1_MARK, A0_MARK,
- RTS2_MARK, SIM_D_MARK, SIM_CLK_MARK, SIM_RST_MARK,
-
- /* PTY (mobule: LBSC) */
- D7_MARK, D6_MARK, D5_MARK, D4_MARK,
- D3_MARK, D2_MARK, D1_MARK, D0_MARK,
-
- /* PTZ (mobule: eMMC, ONFI) */
- MMCDAT7_MARK, MMCDAT6_MARK, MMCDAT5_MARK, MMCDAT4_MARK,
- MMCDAT3_MARK, MMCDAT2_MARK, MMCDAT1_MARK, MMCDAT0_MARK,
- ON_DQ7_MARK, ON_DQ6_MARK, ON_DQ5_MARK, ON_DQ4_MARK,
- ON_DQ3_MARK, ON_DQ2_MARK, ON_DQ1_MARK, ON_DQ0_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PTA GPIO */
- PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
- PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
- PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
- PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
- PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
- PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
- PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
- PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
-
- /* PTB GPIO */
- PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
- PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
- PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
- PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
- PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
- PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
- PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
- PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
-
- /* PTC GPIO */
- PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
- PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
- PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
- PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
- PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
- PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
- PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
- PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
-
- /* PTD GPIO */
- PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
- PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
- PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
- PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
- PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
- PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
- PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
- PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
-
- /* PTE GPIO */
- PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT),
- PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT),
- PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
- PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
- PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
- PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
- PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
- PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
-
- /* PTF GPIO */
- PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
- PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
- PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
- PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
- PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
- PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
- PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
- PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
-
- /* PTG GPIO */
- PINMUX_DATA(PTG7_DATA, PTG7_IN, PTG7_OUT),
- PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
- PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
- PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
- PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
- PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
- PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
- PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
-
- /* PTH GPIO */
- PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
- PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
- PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
- PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
- PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
- PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
- PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
- PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
-
- /* PTI GPIO */
- PINMUX_DATA(PTI7_DATA, PTI7_IN, PTI7_OUT),
- PINMUX_DATA(PTI6_DATA, PTI6_IN, PTI6_OUT),
- PINMUX_DATA(PTI5_DATA, PTI5_IN, PTI5_OUT),
- PINMUX_DATA(PTI4_DATA, PTI4_IN, PTI4_OUT),
- PINMUX_DATA(PTI3_DATA, PTI3_IN, PTI3_OUT),
- PINMUX_DATA(PTI2_DATA, PTI2_IN, PTI2_OUT),
- PINMUX_DATA(PTI1_DATA, PTI1_IN, PTI1_OUT),
- PINMUX_DATA(PTI0_DATA, PTI0_IN, PTI0_OUT),
-
- /* PTJ GPIO */
- PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
- PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
- PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
- PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
- PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
- PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
- PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
-
- /* PTK GPIO */
- PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
- PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
- PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
- PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
- PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
- PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
- PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
- PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
-
- /* PTL GPIO */
- PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
- PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
- PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
- PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
- PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
- PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
- PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
-
- /* PTM GPIO */
- PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
- PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
- PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
- PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
- PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
- PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
- PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
-
- /* PTN GPIO */
- PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
- PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
- PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
- PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
- PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
- PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
- PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
-
- /* PTO GPIO */
- PINMUX_DATA(PTO7_DATA, PTO7_IN, PTO7_OUT),
- PINMUX_DATA(PTO6_DATA, PTO6_IN, PTO6_OUT),
- PINMUX_DATA(PTO5_DATA, PTO5_IN, PTO5_OUT),
- PINMUX_DATA(PTO4_DATA, PTO4_IN, PTO4_OUT),
- PINMUX_DATA(PTO3_DATA, PTO3_IN, PTO3_OUT),
- PINMUX_DATA(PTO2_DATA, PTO2_IN, PTO2_OUT),
- PINMUX_DATA(PTO1_DATA, PTO1_IN, PTO1_OUT),
- PINMUX_DATA(PTO0_DATA, PTO0_IN, PTO0_OUT),
-
- /* PTQ GPIO */
- PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
- PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
- PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
- PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
- PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
- PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
- PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
-
- /* PTR GPIO */
- PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
- PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
- PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
- PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
- PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
- PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
- PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
- PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
-
- /* PTS GPIO */
- PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
- PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
- PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
- PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
- PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
- PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
- PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
- PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
-
- /* PTT GPIO */
- PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT),
- PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT),
- PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
- PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
- PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
- PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
- PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
- PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
-
- /* PTU GPIO */
- PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
- PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
- PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
- PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
- PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
- PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
- PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
- PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
-
- /* PTV GPIO */
- PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
- PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
- PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
- PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
- PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
- PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
- PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
- PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
-
- /* PTW GPIO */
- PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
- PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
- PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
- PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
- PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
- PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
- PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
- PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
-
- /* PTX GPIO */
- PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
- PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
- PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
- PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
- PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
- PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
- PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
- PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
-
- /* PTY GPIO */
- PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
- PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
- PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
- PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
- PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
- PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
- PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
- PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
-
- /* PTZ GPIO */
- PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
- PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
- PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
- PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
- PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
- PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
- PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
- PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
-
- /* PTA FN */
- PINMUX_DATA(BS_MARK, PTA7_FN),
- PINMUX_DATA(RDWR_MARK, PTA6_FN),
- PINMUX_DATA(WE1_MARK, PTA5_FN),
- PINMUX_DATA(RDY_MARK, PTA4_FN),
- PINMUX_DATA(ET0_MDC_MARK, PTA3_FN),
- PINMUX_DATA(ET0_MDIO_MARK, PTA2_FN),
- PINMUX_DATA(ET1_MDC_MARK, PTA1_FN),
- PINMUX_DATA(ET1_MDIO_MARK, PTA0_FN),
-
- /* PTB FN */
- PINMUX_DATA(IRQ15_MARK, PS0_15_FN1, PTB7_FN),
- PINMUX_DATA(ON_NRE_MARK, PS0_15_FN2, PTB7_FN),
- PINMUX_DATA(IRQ14_MARK, PS0_14_FN1, PTB6_FN),
- PINMUX_DATA(ON_NWE_MARK, PS0_14_FN2, PTB6_FN),
- PINMUX_DATA(IRQ13_MARK, PS0_13_FN1, PTB5_FN),
- PINMUX_DATA(ON_NWP_MARK, PS0_13_FN2, PTB5_FN),
- PINMUX_DATA(IRQ12_MARK, PS0_12_FN1, PTB4_FN),
- PINMUX_DATA(ON_NCE0_MARK, PS0_12_FN2, PTB4_FN),
- PINMUX_DATA(IRQ11_MARK, PS0_11_FN1, PTB3_FN),
- PINMUX_DATA(ON_R_B0_MARK, PS0_11_FN2, PTB3_FN),
- PINMUX_DATA(IRQ10_MARK, PS0_10_FN1, PTB2_FN),
- PINMUX_DATA(ON_ALE_MARK, PS0_10_FN2, PTB2_FN),
- PINMUX_DATA(IRQ9_MARK, PS0_9_FN1, PTB1_FN),
- PINMUX_DATA(ON_CLE_MARK, PS0_9_FN2, PTB1_FN),
- PINMUX_DATA(IRQ8_MARK, PS0_8_FN1, PTB0_FN),
- PINMUX_DATA(TCLK_MARK, PS0_8_FN2, PTB0_FN),
-
- /* PTC FN */
- PINMUX_DATA(IRQ7_MARK, PS0_7_FN1, PTC7_FN),
- PINMUX_DATA(PWMU0_MARK, PS0_7_FN2, PTC7_FN),
- PINMUX_DATA(IRQ6_MARK, PS0_6_FN1, PTC6_FN),
- PINMUX_DATA(PWMU1_MARK, PS0_6_FN2, PTC6_FN),
- PINMUX_DATA(IRQ5_MARK, PS0_5_FN1, PTC5_FN),
- PINMUX_DATA(PWMU2_MARK, PS0_5_FN2, PTC5_FN),
- PINMUX_DATA(IRQ4_MARK, PS0_4_FN1, PTC5_FN),
- PINMUX_DATA(PWMU3_MARK, PS0_4_FN2, PTC4_FN),
- PINMUX_DATA(IRQ3_MARK, PS0_3_FN1, PTC3_FN),
- PINMUX_DATA(PWMU4_MARK, PS0_3_FN2, PTC3_FN),
- PINMUX_DATA(IRQ2_MARK, PS0_2_FN1, PTC2_FN),
- PINMUX_DATA(PWMU5_MARK, PS0_2_FN2, PTC2_FN),
- PINMUX_DATA(IRQ1_MARK, PTC1_FN),
- PINMUX_DATA(IRQ0_MARK, PTC0_FN),
-
- /* PTD FN */
- PINMUX_DATA(SP0_MOSI_MARK, PTD7_FN),
- PINMUX_DATA(SP0_MISO_MARK, PTD6_FN),
- PINMUX_DATA(SP0_SCK_MARK, PTD5_FN),
- PINMUX_DATA(SP0_SCK_FB_MARK, PTD4_FN),
- PINMUX_DATA(SP0_SS0_MARK, PTD3_FN),
- PINMUX_DATA(SP0_SS1_MARK, PS1_10_FN1, PTD2_FN),
- PINMUX_DATA(DREQ0_MARK, PS1_10_FN2, PTD2_FN),
- PINMUX_DATA(SP0_SS2_MARK, PS1_9_FN1, PTD1_FN),
- PINMUX_DATA(DACK0_MARK, PS1_9_FN2, PTD1_FN),
- PINMUX_DATA(SP0_SS3_MARK, PS1_8_FN1, PTD0_FN),
- PINMUX_DATA(TEND0_MARK, PS1_8_FN2, PTD0_FN),
-
- /* PTE FN */
- PINMUX_DATA(RMII0_CRS_DV_MARK, PTE7_FN),
- PINMUX_DATA(RMII0_TXD1_MARK, PTE6_FN),
- PINMUX_DATA(RMII0_TXD0_MARK, PTE5_FN),
- PINMUX_DATA(RMII0_TXEN_MARK, PTE4_FN),
- PINMUX_DATA(RMII0_REFCLK_MARK, PTE3_FN),
- PINMUX_DATA(RMII0_RXD1_MARK, PTE2_FN),
- PINMUX_DATA(RMII0_RXD0_MARK, PTE1_FN),
- PINMUX_DATA(RMII0_RX_ER_MARK, PTE0_FN),
-
- /* PTF FN */
- PINMUX_DATA(RMII1_CRS_DV_MARK, PTF7_FN),
- PINMUX_DATA(RMII1_TXD1_MARK, PTF6_FN),
- PINMUX_DATA(RMII1_TXD0_MARK, PTF5_FN),
- PINMUX_DATA(RMII1_TXEN_MARK, PTF4_FN),
- PINMUX_DATA(RMII1_REFCLK_MARK, PTF3_FN),
- PINMUX_DATA(RMII1_RXD1_MARK, PS1_2_FN1, PTF2_FN),
- PINMUX_DATA(RAC_RI_MARK, PS1_2_FN2, PTF2_FN),
- PINMUX_DATA(RMII1_RXD0_MARK, PTF1_FN),
- PINMUX_DATA(RMII1_RX_ER_MARK, PTF0_FN),
-
- /* PTG FN */
- PINMUX_DATA(BOOTFMS_MARK, PTG7_FN),
- PINMUX_DATA(BOOTWP_MARK, PTG6_FN),
- PINMUX_DATA(A25_MARK, PS2_13_FN1, PTG5_FN),
- PINMUX_DATA(MMCCLK_MARK, PS2_13_FN2, PTG5_FN),
- PINMUX_DATA(A24_MARK, PS2_12_FN1, PTG4_FN),
- PINMUX_DATA(MMCCMD_MARK, PS2_12_FN2, PTG4_FN),
- PINMUX_DATA(SERIRQ_MARK, PTG3_FN),
- PINMUX_DATA(WDTOVF_MARK, PTG2_FN),
- PINMUX_DATA(LPCPD_MARK, PTG1_FN),
- PINMUX_DATA(LDRQ_MARK, PTG0_FN),
-
- /* PTH FN */
- PINMUX_DATA(SP1_MOSI_MARK, PS2_7_FN1, PTH7_FN),
- PINMUX_DATA(TEND1_MARK, PS2_7_FN2, PTH7_FN),
- PINMUX_DATA(SP1_MISO_MARK, PS2_6_FN1, PTH6_FN),
- PINMUX_DATA(DREQ1_MARK, PS2_6_FN2, PTH6_FN),
- PINMUX_DATA(SP1_SCK_MARK, PS2_5_FN1, PTH5_FN),
- PINMUX_DATA(DACK1_MARK, PS2_5_FN2, PTH5_FN),
- PINMUX_DATA(SP1_SCK_FB_MARK, PS2_4_FN1, PTH4_FN),
- PINMUX_DATA(ADTRG1_MARK, PS2_4_FN2, PTH4_FN),
- PINMUX_DATA(SP1_SS0_MARK, PTH3_FN),
- PINMUX_DATA(SP1_SS1_MARK, PS2_2_FN1, PTH2_FN),
- PINMUX_DATA(ADTRG0_MARK, PS2_2_FN2, PTH2_FN),
- PINMUX_DATA(WP_MARK, PTH1_FN),
- PINMUX_DATA(FMS0_MARK, PTH0_FN),
-
- /* PTI FN */
- PINMUX_DATA(D15_MARK, PS3_15_FN1, PTI7_FN),
- PINMUX_DATA(SD_WP_MARK, PS3_15_FN2, PTI7_FN),
- PINMUX_DATA(D14_MARK, PS3_14_FN1, PTI6_FN),
- PINMUX_DATA(SD_CD_MARK, PS3_14_FN2, PTI6_FN),
- PINMUX_DATA(D13_MARK, PS3_13_FN1, PTI5_FN),
- PINMUX_DATA(SD_CLK_MARK, PS3_13_FN2, PTI5_FN),
- PINMUX_DATA(D12_MARK, PS3_12_FN1, PTI4_FN),
- PINMUX_DATA(SD_CMD_MARK, PS3_12_FN2, PTI4_FN),
- PINMUX_DATA(D11_MARK, PS3_11_FN1, PTI3_FN),
- PINMUX_DATA(SD_D3_MARK, PS3_11_FN2, PTI3_FN),
- PINMUX_DATA(D10_MARK, PS3_10_FN1, PTI2_FN),
- PINMUX_DATA(SD_D2_MARK, PS3_10_FN2, PTI2_FN),
- PINMUX_DATA(D9_MARK, PS3_9_FN1, PTI1_FN),
- PINMUX_DATA(SD_D1_MARK, PS3_9_FN2, PTI1_FN),
- PINMUX_DATA(D8_MARK, PS3_8_FN1, PTI0_FN),
- PINMUX_DATA(SD_D0_MARK, PS3_8_FN2, PTI0_FN),
-
- /* PTJ FN */
- PINMUX_DATA(RTS3_MARK, PTJ6_FN),
- PINMUX_DATA(CTS3_MARK, PTJ5_FN),
- PINMUX_DATA(TXD3_MARK, PTJ4_FN),
- PINMUX_DATA(RXD3_MARK, PTJ3_FN),
- PINMUX_DATA(RTS4_MARK, PTJ2_FN),
- PINMUX_DATA(RXD4_MARK, PTJ1_FN),
- PINMUX_DATA(TXD4_MARK, PTJ0_FN),
-
- /* PTK FN */
- PINMUX_DATA(COM2_TXD_MARK, PS3_7_FN1, PTK7_FN),
- PINMUX_DATA(SCK2_MARK, PS3_7_FN2, PTK7_FN),
- PINMUX_DATA(COM2_RXD_MARK, PTK6_FN),
- PINMUX_DATA(COM2_RTS_MARK, PTK5_FN),
- PINMUX_DATA(COM2_CTS_MARK, PTK4_FN),
- PINMUX_DATA(COM2_DTR_MARK, PTK3_FN),
- PINMUX_DATA(COM2_DSR_MARK, PS3_2_FN1, PTK2_FN),
- PINMUX_DATA(SCK4_MARK, PS3_2_FN2, PTK2_FN),
- PINMUX_DATA(COM2_DCD_MARK, PS3_1_FN1, PTK1_FN),
- PINMUX_DATA(SCK3_MARK, PS3_1_FN2, PTK1_FN),
- PINMUX_DATA(CLKOUT_MARK, PTK0_FN),
-
- /* PTL FN */
- PINMUX_DATA(RAC_RXD_MARK, PS4_14_FN1, PTL6_FN),
- PINMUX_DATA(RXD2_MARK, PS4_14_FN2, PTL6_FN),
- PINMUX_DATA(RAC_RTS_MARK, PS4_13_FN1, PTL5_FN),
- PINMUX_DATA(CS5_MARK, PS4_13_FN2, PTL5_FN),
- PINMUX_DATA(RAC_CTS_MARK, PS4_12_FN1, PTL4_FN),
- PINMUX_DATA(CS6_MARK, PS4_12_FN2, PTL4_FN),
- PINMUX_DATA(RAC_DTR_MARK, PTL3_FN),
- PINMUX_DATA(RAC_DSR_MARK, PS4_10_FN1, PTL2_FN),
- PINMUX_DATA(AUDSYNC_MARK, PS4_10_FN2, PTL2_FN),
- PINMUX_DATA(RAC_DCD_MARK, PS4_9_FN1, PTL1_FN),
- PINMUX_DATA(AUDCK_MARK, PS4_9_FN2, PTL1_FN),
- PINMUX_DATA(RAC_TXD_MARK, PS4_8_FN1, PTL0_FN),
- PINMUX_DATA(TXD2_MARK, PS4_8_FN1, PTL0_FN),
-
- /* PTM FN */
- PINMUX_DATA(CS4_MARK, PTM7_FN),
- PINMUX_DATA(RD_MARK, PTM6_FN),
- PINMUX_DATA(WE0_MARK, PTM7_FN),
- PINMUX_DATA(CS0_MARK, PTM4_FN),
- PINMUX_DATA(SDA6_MARK, PTM3_FN),
- PINMUX_DATA(SCL6_MARK, PTM2_FN),
- PINMUX_DATA(SDA7_MARK, PTM1_FN),
- PINMUX_DATA(SCL7_MARK, PTM0_FN),
-
- /* PTN FN */
- PINMUX_DATA(VBUS_EN_MARK, PTN6_FN),
- PINMUX_DATA(VBUS_OC_MARK, PTN5_FN),
- PINMUX_DATA(JMCTCK_MARK, PS4_4_FN1, PTN4_FN),
- PINMUX_DATA(SGPIO1_CLK_MARK, PS4_4_FN2, PTN4_FN),
- PINMUX_DATA(JMCTMS_MARK, PS4_3_FN1, PTN5_FN),
- PINMUX_DATA(SGPIO1_LOAD_MARK, PS4_3_FN2, PTN5_FN),
- PINMUX_DATA(JMCTDO_MARK, PS4_2_FN1, PTN2_FN),
- PINMUX_DATA(SGPIO1_DO_MARK, PS4_2_FN2, PTN2_FN),
- PINMUX_DATA(JMCTDI_MARK, PS4_1_FN1, PTN1_FN),
- PINMUX_DATA(SGPIO1_DI_MARK, PS4_1_FN2, PTN1_FN),
- PINMUX_DATA(JMCTRST_MARK, PS4_0_FN1, PTN0_FN),
- PINMUX_DATA(SUB_CLKIN_MARK, PS4_0_FN2, PTN0_FN),
-
- /* PTO FN */
- PINMUX_DATA(SGPIO0_CLK_MARK, PTO7_FN),
- PINMUX_DATA(SGPIO0_LOAD_MARK, PTO6_FN),
- PINMUX_DATA(SGPIO0_DI_MARK, PTO5_FN),
- PINMUX_DATA(SGPIO0_DO_MARK, PTO4_FN),
- PINMUX_DATA(SGPIO2_CLK_MARK, PS5_11_FN1, PTO3_FN),
- PINMUX_DATA(COM1_TXD_MARK, PS5_11_FN2, PTO3_FN),
- PINMUX_DATA(SGPIO2_LOAD_MARK, PS5_10_FN1, PTO2_FN),
- PINMUX_DATA(COM1_RXD_MARK, PS5_10_FN2, PTO2_FN),
- PINMUX_DATA(SGPIO2_DI_MARK, PS5_9_FN1, PTO1_FN),
- PINMUX_DATA(COM1_RTS_MARK, PS5_9_FN2, PTO1_FN),
- PINMUX_DATA(SGPIO2_DO_MARK, PS5_8_FN1, PTO0_FN),
- PINMUX_DATA(COM1_CTS_MARK, PS5_8_FN2, PTO0_FN),
-
- /* PTP FN */
-
- /* PTQ FN */
- PINMUX_DATA(LAD3_MARK, PTQ6_FN),
- PINMUX_DATA(LAD2_MARK, PTQ5_FN),
- PINMUX_DATA(LAD1_MARK, PTQ4_FN),
- PINMUX_DATA(LAD0_MARK, PTQ3_FN),
- PINMUX_DATA(LFRAME_MARK, PTQ2_FN),
- PINMUX_DATA(LRESET_MARK, PTQ1_FN),
- PINMUX_DATA(LCLK_MARK, PTQ0_FN),
-
- /* PTR FN */
- PINMUX_DATA(SDA8_MARK, PTR7_FN), /* DDC3? */
- PINMUX_DATA(SCL8_MARK, PTR6_FN), /* DDC2? */
- PINMUX_DATA(SDA2_MARK, PTR5_FN),
- PINMUX_DATA(SCL2_MARK, PTR4_FN),
- PINMUX_DATA(SDA1_MARK, PTR3_FN),
- PINMUX_DATA(SCL1_MARK, PTR2_FN),
- PINMUX_DATA(SDA0_MARK, PTR1_FN),
- PINMUX_DATA(SCL0_MARK, PTR0_FN),
-
- /* PTS FN */
- PINMUX_DATA(SDA9_MARK, PTS7_FN), /* DDC1? */
- PINMUX_DATA(SCL9_MARK, PTS6_FN), /* DDC0? */
- PINMUX_DATA(SDA5_MARK, PTS5_FN),
- PINMUX_DATA(SCL5_MARK, PTS4_FN),
- PINMUX_DATA(SDA4_MARK, PTS3_FN),
- PINMUX_DATA(SCL4_MARK, PTS2_FN),
- PINMUX_DATA(SDA3_MARK, PTS1_FN),
- PINMUX_DATA(SCL3_MARK, PTS0_FN),
-
- /* PTT FN */
- PINMUX_DATA(PWMX7_MARK, PS5_7_FN1, PTT7_FN),
- PINMUX_DATA(AUDATA3_MARK, PS5_7_FN2, PTT7_FN),
- PINMUX_DATA(PWMX6_MARK, PS5_6_FN1, PTT6_FN),
- PINMUX_DATA(AUDATA2_MARK, PS5_6_FN2, PTT6_FN),
- PINMUX_DATA(PWMX5_MARK, PS5_5_FN1, PTT5_FN),
- PINMUX_DATA(AUDATA1_MARK, PS5_5_FN2, PTT5_FN),
- PINMUX_DATA(PWMX4_MARK, PS5_4_FN1, PTT4_FN),
- PINMUX_DATA(AUDATA0_MARK, PS5_4_FN2, PTT4_FN),
- PINMUX_DATA(PWMX3_MARK, PS5_3_FN1, PTT3_FN),
- PINMUX_DATA(STATUS1_MARK, PS5_3_FN2, PTT3_FN),
- PINMUX_DATA(PWMX2_MARK, PS5_2_FN1, PTT2_FN),
- PINMUX_DATA(STATUS0_MARK, PS5_2_FN2, PTT2_FN),
- PINMUX_DATA(PWMX1_MARK, PTT1_FN),
- PINMUX_DATA(PWMX0_MARK, PTT0_FN),
-
- /* PTU FN */
- PINMUX_DATA(LGPIO7_MARK, PS6_15_FN1, PTU7_FN),
- PINMUX_DATA(APMONCTL_O_MARK, PS6_15_FN2, PTU7_FN),
- PINMUX_DATA(LGPIO6_MARK, PS6_14_FN1, PTU6_FN),
- PINMUX_DATA(APMPWBTOUT_O_MARK, PS6_14_FN2, PTU6_FN),
- PINMUX_DATA(LGPIO5_MARK, PS6_13_FN1, PTU5_FN),
- PINMUX_DATA(APMSCI_O_MARK, PS6_13_FN2, PTU5_FN),
- PINMUX_DATA(LGPIO4_MARK, PS6_12_FN1, PTU4_FN),
- PINMUX_DATA(APMVDDON_MARK, PS6_12_FN2, PTU4_FN),
- PINMUX_DATA(LGPIO3_MARK, PS6_11_FN1, PTU3_FN),
- PINMUX_DATA(APMSLPBTN_MARK, PS6_11_FN2, PTU3_FN),
- PINMUX_DATA(LGPIO2_MARK, PS6_10_FN1, PTU2_FN),
- PINMUX_DATA(APMPWRBTN_MARK, PS6_10_FN2, PTU2_FN),
- PINMUX_DATA(LGPIO1_MARK, PS6_9_FN1, PTU1_FN),
- PINMUX_DATA(APMS5N_MARK, PS6_9_FN2, PTU1_FN),
- PINMUX_DATA(LGPIO0_MARK, PS6_8_FN1, PTU0_FN),
- PINMUX_DATA(APMS3N_MARK, PS6_8_FN2, PTU0_FN),
-
- /* PTV FN */
- PINMUX_DATA(A23_MARK, PS6_7_FN1, PTV7_FN),
- PINMUX_DATA(COM2_RI_MARK, PS6_7_FN2, PTV7_FN),
- PINMUX_DATA(A22_MARK, PS6_6_FN1, PTV6_FN),
- PINMUX_DATA(R_SPI_MOSI_MARK, PS6_6_FN2, PTV6_FN),
- PINMUX_DATA(A21_MARK, PS6_5_FN1, PTV5_FN),
- PINMUX_DATA(R_SPI_MISO_MARK, PS6_5_FN2, PTV5_FN),
- PINMUX_DATA(A20_MARK, PS6_4_FN1, PTV4_FN),
- PINMUX_DATA(R_SPI_RSPCK_MARK, PS6_4_FN2, PTV4_FN),
- PINMUX_DATA(A19_MARK, PS6_3_FN1, PTV3_FN),
- PINMUX_DATA(R_SPI_SSL0_MARK, PS6_3_FN2, PTV3_FN),
- PINMUX_DATA(A18_MARK, PS6_2_FN1, PTV2_FN),
- PINMUX_DATA(R_SPI_SSL1_MARK, PS6_2_FN2, PTV2_FN),
- PINMUX_DATA(A17_MARK, PS6_1_FN1, PTV1_FN),
- PINMUX_DATA(EVENT7_MARK, PS6_1_FN2, PTV1_FN),
- PINMUX_DATA(A16_MARK, PS6_0_FN1, PTV0_FN),
- PINMUX_DATA(EVENT6_MARK, PS6_0_FN1, PTV0_FN),
-
- /* PTW FN */
- PINMUX_DATA(A15_MARK, PS7_15_FN1, PTW7_FN),
- PINMUX_DATA(EVENT5_MARK, PS7_15_FN2, PTW7_FN),
- PINMUX_DATA(A14_MARK, PS7_14_FN1, PTW6_FN),
- PINMUX_DATA(EVENT4_MARK, PS7_14_FN2, PTW6_FN),
- PINMUX_DATA(A13_MARK, PS7_13_FN1, PTW5_FN),
- PINMUX_DATA(EVENT3_MARK, PS7_13_FN2, PTW5_FN),
- PINMUX_DATA(A12_MARK, PS7_12_FN1, PTW4_FN),
- PINMUX_DATA(EVENT2_MARK, PS7_12_FN2, PTW4_FN),
- PINMUX_DATA(A11_MARK, PS7_11_FN1, PTW3_FN),
- PINMUX_DATA(EVENT1_MARK, PS7_11_FN2, PTW3_FN),
- PINMUX_DATA(A10_MARK, PS7_10_FN1, PTW2_FN),
- PINMUX_DATA(EVENT0_MARK, PS7_10_FN2, PTW2_FN),
- PINMUX_DATA(A9_MARK, PS7_9_FN1, PTW1_FN),
- PINMUX_DATA(CTS4_MARK, PS7_9_FN2, PTW1_FN),
- PINMUX_DATA(A8_MARK, PS7_8_FN1, PTW0_FN),
- PINMUX_DATA(CTS2_MARK, PS7_8_FN2, PTW0_FN),
-
- /* PTX FN */
- PINMUX_DATA(A7_MARK, PS7_7_FN1, PTX7_FN),
- PINMUX_DATA(RTS2_MARK, PS7_7_FN2, PTX7_FN),
- PINMUX_DATA(A6_MARK, PS7_6_FN1, PTX6_FN),
- PINMUX_DATA(SIM_D_MARK, PS7_6_FN2, PTX6_FN),
- PINMUX_DATA(A5_MARK, PS7_5_FN1, PTX5_FN),
- PINMUX_DATA(SIM_CLK_MARK, PS7_5_FN2, PTX5_FN),
- PINMUX_DATA(A4_MARK, PS7_4_FN1, PTX4_FN),
- PINMUX_DATA(SIM_RST_MARK, PS7_4_FN2, PTX4_FN),
- PINMUX_DATA(A3_MARK, PTX3_FN),
- PINMUX_DATA(A2_MARK, PTX2_FN),
- PINMUX_DATA(A1_MARK, PTX1_FN),
- PINMUX_DATA(A0_MARK, PTX0_FN),
-
- /* PTY FN */
- PINMUX_DATA(D7_MARK, PTY7_FN),
- PINMUX_DATA(D6_MARK, PTY6_FN),
- PINMUX_DATA(D5_MARK, PTY5_FN),
- PINMUX_DATA(D4_MARK, PTY4_FN),
- PINMUX_DATA(D3_MARK, PTY3_FN),
- PINMUX_DATA(D2_MARK, PTY2_FN),
- PINMUX_DATA(D1_MARK, PTY1_FN),
- PINMUX_DATA(D0_MARK, PTY0_FN),
-
- /* PTZ FN */
- PINMUX_DATA(MMCDAT7_MARK, PS8_15_FN1, PTZ7_FN),
- PINMUX_DATA(ON_DQ7_MARK, PS8_15_FN2, PTZ7_FN),
- PINMUX_DATA(MMCDAT6_MARK, PS8_14_FN1, PTZ6_FN),
- PINMUX_DATA(ON_DQ6_MARK, PS8_14_FN2, PTZ6_FN),
- PINMUX_DATA(MMCDAT5_MARK, PS8_13_FN1, PTZ5_FN),
- PINMUX_DATA(ON_DQ5_MARK, PS8_13_FN2, PTZ5_FN),
- PINMUX_DATA(MMCDAT4_MARK, PS8_12_FN1, PTZ4_FN),
- PINMUX_DATA(ON_DQ4_MARK, PS8_12_FN2, PTZ4_FN),
- PINMUX_DATA(MMCDAT3_MARK, PS8_11_FN1, PTZ3_FN),
- PINMUX_DATA(ON_DQ3_MARK, PS8_11_FN2, PTZ3_FN),
- PINMUX_DATA(MMCDAT2_MARK, PS8_10_FN1, PTZ2_FN),
- PINMUX_DATA(ON_DQ2_MARK, PS8_10_FN2, PTZ2_FN),
- PINMUX_DATA(MMCDAT1_MARK, PS8_9_FN1, PTZ1_FN),
- PINMUX_DATA(ON_DQ1_MARK, PS8_9_FN2, PTZ1_FN),
- PINMUX_DATA(MMCDAT0_MARK, PS8_8_FN1, PTZ0_FN),
- PINMUX_DATA(ON_DQ0_MARK, PS8_8_FN2, PTZ0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PTA */
- PINMUX_GPIO(PTA7),
- PINMUX_GPIO(PTA6),
- PINMUX_GPIO(PTA5),
- PINMUX_GPIO(PTA4),
- PINMUX_GPIO(PTA3),
- PINMUX_GPIO(PTA2),
- PINMUX_GPIO(PTA1),
- PINMUX_GPIO(PTA0),
-
- /* PTB */
- PINMUX_GPIO(PTB7),
- PINMUX_GPIO(PTB6),
- PINMUX_GPIO(PTB5),
- PINMUX_GPIO(PTB4),
- PINMUX_GPIO(PTB3),
- PINMUX_GPIO(PTB2),
- PINMUX_GPIO(PTB1),
- PINMUX_GPIO(PTB0),
-
- /* PTC */
- PINMUX_GPIO(PTC7),
- PINMUX_GPIO(PTC6),
- PINMUX_GPIO(PTC5),
- PINMUX_GPIO(PTC4),
- PINMUX_GPIO(PTC3),
- PINMUX_GPIO(PTC2),
- PINMUX_GPIO(PTC1),
- PINMUX_GPIO(PTC0),
-
- /* PTD */
- PINMUX_GPIO(PTD7),
- PINMUX_GPIO(PTD6),
- PINMUX_GPIO(PTD5),
- PINMUX_GPIO(PTD4),
- PINMUX_GPIO(PTD3),
- PINMUX_GPIO(PTD2),
- PINMUX_GPIO(PTD1),
- PINMUX_GPIO(PTD0),
-
- /* PTE */
- PINMUX_GPIO(PTE7),
- PINMUX_GPIO(PTE6),
- PINMUX_GPIO(PTE5),
- PINMUX_GPIO(PTE4),
- PINMUX_GPIO(PTE3),
- PINMUX_GPIO(PTE2),
- PINMUX_GPIO(PTE1),
- PINMUX_GPIO(PTE0),
-
- /* PTF */
- PINMUX_GPIO(PTF7),
- PINMUX_GPIO(PTF6),
- PINMUX_GPIO(PTF5),
- PINMUX_GPIO(PTF4),
- PINMUX_GPIO(PTF3),
- PINMUX_GPIO(PTF2),
- PINMUX_GPIO(PTF1),
- PINMUX_GPIO(PTF0),
-
- /* PTG */
- PINMUX_GPIO(PTG7),
- PINMUX_GPIO(PTG6),
- PINMUX_GPIO(PTG5),
- PINMUX_GPIO(PTG4),
- PINMUX_GPIO(PTG3),
- PINMUX_GPIO(PTG2),
- PINMUX_GPIO(PTG1),
- PINMUX_GPIO(PTG0),
-
- /* PTH */
- PINMUX_GPIO(PTH7),
- PINMUX_GPIO(PTH6),
- PINMUX_GPIO(PTH5),
- PINMUX_GPIO(PTH4),
- PINMUX_GPIO(PTH3),
- PINMUX_GPIO(PTH2),
- PINMUX_GPIO(PTH1),
- PINMUX_GPIO(PTH0),
-
- /* PTI */
- PINMUX_GPIO(PTI7),
- PINMUX_GPIO(PTI6),
- PINMUX_GPIO(PTI5),
- PINMUX_GPIO(PTI4),
- PINMUX_GPIO(PTI3),
- PINMUX_GPIO(PTI2),
- PINMUX_GPIO(PTI1),
- PINMUX_GPIO(PTI0),
-
- /* PTJ */
- PINMUX_GPIO(PTJ6),
- PINMUX_GPIO(PTJ5),
- PINMUX_GPIO(PTJ4),
- PINMUX_GPIO(PTJ3),
- PINMUX_GPIO(PTJ2),
- PINMUX_GPIO(PTJ1),
- PINMUX_GPIO(PTJ0),
-
- /* PTK */
- PINMUX_GPIO(PTK7),
- PINMUX_GPIO(PTK6),
- PINMUX_GPIO(PTK5),
- PINMUX_GPIO(PTK4),
- PINMUX_GPIO(PTK3),
- PINMUX_GPIO(PTK2),
- PINMUX_GPIO(PTK1),
- PINMUX_GPIO(PTK0),
-
- /* PTL */
- PINMUX_GPIO(PTL6),
- PINMUX_GPIO(PTL5),
- PINMUX_GPIO(PTL4),
- PINMUX_GPIO(PTL3),
- PINMUX_GPIO(PTL2),
- PINMUX_GPIO(PTL1),
- PINMUX_GPIO(PTL0),
-
- /* PTM */
- PINMUX_GPIO(PTM7),
- PINMUX_GPIO(PTM6),
- PINMUX_GPIO(PTM5),
- PINMUX_GPIO(PTM4),
- PINMUX_GPIO(PTM3),
- PINMUX_GPIO(PTM2),
- PINMUX_GPIO(PTM1),
- PINMUX_GPIO(PTM0),
-
- /* PTN */
- PINMUX_GPIO(PTN6),
- PINMUX_GPIO(PTN5),
- PINMUX_GPIO(PTN4),
- PINMUX_GPIO(PTN3),
- PINMUX_GPIO(PTN2),
- PINMUX_GPIO(PTN1),
- PINMUX_GPIO(PTN0),
-
- /* PTO */
- PINMUX_GPIO(PTO7),
- PINMUX_GPIO(PTO6),
- PINMUX_GPIO(PTO5),
- PINMUX_GPIO(PTO4),
- PINMUX_GPIO(PTO3),
- PINMUX_GPIO(PTO2),
- PINMUX_GPIO(PTO1),
- PINMUX_GPIO(PTO0),
-
- /* PTP */
- PINMUX_GPIO(PTP7),
- PINMUX_GPIO(PTP6),
- PINMUX_GPIO(PTP5),
- PINMUX_GPIO(PTP4),
- PINMUX_GPIO(PTP3),
- PINMUX_GPIO(PTP2),
- PINMUX_GPIO(PTP1),
- PINMUX_GPIO(PTP0),
-
- /* PTQ */
- PINMUX_GPIO(PTQ6),
- PINMUX_GPIO(PTQ5),
- PINMUX_GPIO(PTQ4),
- PINMUX_GPIO(PTQ3),
- PINMUX_GPIO(PTQ2),
- PINMUX_GPIO(PTQ1),
- PINMUX_GPIO(PTQ0),
-
- /* PTR */
- PINMUX_GPIO(PTR7),
- PINMUX_GPIO(PTR6),
- PINMUX_GPIO(PTR5),
- PINMUX_GPIO(PTR4),
- PINMUX_GPIO(PTR3),
- PINMUX_GPIO(PTR2),
- PINMUX_GPIO(PTR1),
- PINMUX_GPIO(PTR0),
-
- /* PTS */
- PINMUX_GPIO(PTS7),
- PINMUX_GPIO(PTS6),
- PINMUX_GPIO(PTS5),
- PINMUX_GPIO(PTS4),
- PINMUX_GPIO(PTS3),
- PINMUX_GPIO(PTS2),
- PINMUX_GPIO(PTS1),
- PINMUX_GPIO(PTS0),
-
- /* PTT */
- PINMUX_GPIO(PTT7),
- PINMUX_GPIO(PTT6),
- PINMUX_GPIO(PTT5),
- PINMUX_GPIO(PTT4),
- PINMUX_GPIO(PTT3),
- PINMUX_GPIO(PTT2),
- PINMUX_GPIO(PTT1),
- PINMUX_GPIO(PTT0),
-
- /* PTU */
- PINMUX_GPIO(PTU7),
- PINMUX_GPIO(PTU6),
- PINMUX_GPIO(PTU5),
- PINMUX_GPIO(PTU4),
- PINMUX_GPIO(PTU3),
- PINMUX_GPIO(PTU2),
- PINMUX_GPIO(PTU1),
- PINMUX_GPIO(PTU0),
-
- /* PTV */
- PINMUX_GPIO(PTV7),
- PINMUX_GPIO(PTV6),
- PINMUX_GPIO(PTV5),
- PINMUX_GPIO(PTV4),
- PINMUX_GPIO(PTV3),
- PINMUX_GPIO(PTV2),
- PINMUX_GPIO(PTV1),
- PINMUX_GPIO(PTV0),
-
- /* PTW */
- PINMUX_GPIO(PTW7),
- PINMUX_GPIO(PTW6),
- PINMUX_GPIO(PTW5),
- PINMUX_GPIO(PTW4),
- PINMUX_GPIO(PTW3),
- PINMUX_GPIO(PTW2),
- PINMUX_GPIO(PTW1),
- PINMUX_GPIO(PTW0),
-
- /* PTX */
- PINMUX_GPIO(PTX7),
- PINMUX_GPIO(PTX6),
- PINMUX_GPIO(PTX5),
- PINMUX_GPIO(PTX4),
- PINMUX_GPIO(PTX3),
- PINMUX_GPIO(PTX2),
- PINMUX_GPIO(PTX1),
- PINMUX_GPIO(PTX0),
-
- /* PTY */
- PINMUX_GPIO(PTY7),
- PINMUX_GPIO(PTY6),
- PINMUX_GPIO(PTY5),
- PINMUX_GPIO(PTY4),
- PINMUX_GPIO(PTY3),
- PINMUX_GPIO(PTY2),
- PINMUX_GPIO(PTY1),
- PINMUX_GPIO(PTY0),
-
- /* PTZ */
- PINMUX_GPIO(PTZ7),
- PINMUX_GPIO(PTZ6),
- PINMUX_GPIO(PTZ5),
- PINMUX_GPIO(PTZ4),
- PINMUX_GPIO(PTZ3),
- PINMUX_GPIO(PTZ2),
- PINMUX_GPIO(PTZ1),
- PINMUX_GPIO(PTZ0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* PTA (mobule: LBSC, RGMII) */
- GPIO_FN(BS),
- GPIO_FN(RDWR),
- GPIO_FN(WE1),
- GPIO_FN(RDY),
- GPIO_FN(ET0_MDC),
- GPIO_FN(ET0_MDIO),
- GPIO_FN(ET1_MDC),
- GPIO_FN(ET1_MDIO),
-
- /* PTB (mobule: INTC, ONFI, TMU) */
- GPIO_FN(IRQ15),
- GPIO_FN(IRQ14),
- GPIO_FN(IRQ13),
- GPIO_FN(IRQ12),
- GPIO_FN(IRQ11),
- GPIO_FN(IRQ10),
- GPIO_FN(IRQ9),
- GPIO_FN(IRQ8),
- GPIO_FN(ON_NRE),
- GPIO_FN(ON_NWE),
- GPIO_FN(ON_NWP),
- GPIO_FN(ON_NCE0),
- GPIO_FN(ON_R_B0),
- GPIO_FN(ON_ALE),
- GPIO_FN(ON_CLE),
- GPIO_FN(TCLK),
-
- /* PTC (mobule: IRQ, PWMU) */
- GPIO_FN(IRQ7),
- GPIO_FN(IRQ6),
- GPIO_FN(IRQ5),
- GPIO_FN(IRQ4),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(PWMU0),
- GPIO_FN(PWMU1),
- GPIO_FN(PWMU2),
- GPIO_FN(PWMU3),
- GPIO_FN(PWMU4),
- GPIO_FN(PWMU5),
-
- /* PTD (mobule: SPI0, DMAC) */
- GPIO_FN(SP0_MOSI),
- GPIO_FN(SP0_MISO),
- GPIO_FN(SP0_SCK),
- GPIO_FN(SP0_SCK_FB),
- GPIO_FN(SP0_SS0),
- GPIO_FN(SP0_SS1),
- GPIO_FN(SP0_SS2),
- GPIO_FN(SP0_SS3),
- GPIO_FN(DREQ0),
- GPIO_FN(DACK0),
- GPIO_FN(TEND0),
-
- /* PTE (mobule: RMII) */
- GPIO_FN(RMII0_CRS_DV),
- GPIO_FN(RMII0_TXD1),
- GPIO_FN(RMII0_TXD0),
- GPIO_FN(RMII0_TXEN),
- GPIO_FN(RMII0_REFCLK),
- GPIO_FN(RMII0_RXD1),
- GPIO_FN(RMII0_RXD0),
- GPIO_FN(RMII0_RX_ER),
-
- /* PTF (mobule: RMII, SerMux) */
- GPIO_FN(RMII1_CRS_DV),
- GPIO_FN(RMII1_TXD1),
- GPIO_FN(RMII1_TXD0),
- GPIO_FN(RMII1_TXEN),
- GPIO_FN(RMII1_REFCLK),
- GPIO_FN(RMII1_RXD1),
- GPIO_FN(RMII1_RXD0),
- GPIO_FN(RMII1_RX_ER),
- GPIO_FN(RAC_RI),
-
- /* PTG (mobule: system, LBSC, LPC, WDT, LPC, eMMC) */
- GPIO_FN(BOOTFMS),
- GPIO_FN(BOOTWP),
- GPIO_FN(A25),
- GPIO_FN(A24),
- GPIO_FN(SERIRQ),
- GPIO_FN(WDTOVF),
- GPIO_FN(LPCPD),
- GPIO_FN(LDRQ),
- GPIO_FN(MMCCLK),
- GPIO_FN(MMCCMD),
-
- /* PTH (mobule: SPI1, LPC, DMAC, ADC) */
- GPIO_FN(SP1_MOSI),
- GPIO_FN(SP1_MISO),
- GPIO_FN(SP1_SCK),
- GPIO_FN(SP1_SCK_FB),
- GPIO_FN(SP1_SS0),
- GPIO_FN(SP1_SS1),
- GPIO_FN(WP),
- GPIO_FN(FMS0),
- GPIO_FN(TEND1),
- GPIO_FN(DREQ1),
- GPIO_FN(DACK1),
- GPIO_FN(ADTRG1),
- GPIO_FN(ADTRG0),
-
- /* PTI (mobule: LBSC, SDHI) */
- GPIO_FN(D15),
- GPIO_FN(D14),
- GPIO_FN(D13),
- GPIO_FN(D12),
- GPIO_FN(D11),
- GPIO_FN(D10),
- GPIO_FN(D9),
- GPIO_FN(D8),
- GPIO_FN(SD_WP),
- GPIO_FN(SD_CD),
- GPIO_FN(SD_CLK),
- GPIO_FN(SD_CMD),
- GPIO_FN(SD_D3),
- GPIO_FN(SD_D2),
- GPIO_FN(SD_D1),
- GPIO_FN(SD_D0),
-
- /* PTJ (mobule: SCIF234, SERMUX) */
- GPIO_FN(RTS3),
- GPIO_FN(CTS3),
- GPIO_FN(TXD3),
- GPIO_FN(RXD3),
- GPIO_FN(RTS4),
- GPIO_FN(RXD4),
- GPIO_FN(TXD4),
-
- /* PTK (mobule: SERMUX, LBSC, SCIF) */
- GPIO_FN(COM2_TXD),
- GPIO_FN(COM2_RXD),
- GPIO_FN(COM2_RTS),
- GPIO_FN(COM2_CTS),
- GPIO_FN(COM2_DTR),
- GPIO_FN(COM2_DSR),
- GPIO_FN(COM2_DCD),
- GPIO_FN(CLKOUT),
- GPIO_FN(SCK2),
- GPIO_FN(SCK4),
- GPIO_FN(SCK3),
-
- /* PTL (mobule: SERMUX, SCIF, LBSC, AUD) */
- GPIO_FN(RAC_RXD),
- GPIO_FN(RAC_RTS),
- GPIO_FN(RAC_CTS),
- GPIO_FN(RAC_DTR),
- GPIO_FN(RAC_DSR),
- GPIO_FN(RAC_DCD),
- GPIO_FN(RAC_TXD),
- GPIO_FN(RXD2),
- GPIO_FN(CS5),
- GPIO_FN(CS6),
- GPIO_FN(AUDSYNC),
- GPIO_FN(AUDCK),
- GPIO_FN(TXD2),
-
- /* PTM (mobule: LBSC, IIC) */
- GPIO_FN(CS4),
- GPIO_FN(RD),
- GPIO_FN(WE0),
- GPIO_FN(CS0),
- GPIO_FN(SDA6),
- GPIO_FN(SCL6),
- GPIO_FN(SDA7),
- GPIO_FN(SCL7),
-
- /* PTN (mobule: USB, JMC, SGPIO, WDT) */
- GPIO_FN(VBUS_EN),
- GPIO_FN(VBUS_OC),
- GPIO_FN(JMCTCK),
- GPIO_FN(JMCTMS),
- GPIO_FN(JMCTDO),
- GPIO_FN(JMCTDI),
- GPIO_FN(JMCTRST),
- GPIO_FN(SGPIO1_CLK),
- GPIO_FN(SGPIO1_LOAD),
- GPIO_FN(SGPIO1_DI),
- GPIO_FN(SGPIO1_DO),
- GPIO_FN(SUB_CLKIN),
-
- /* PTO (mobule: SGPIO, SerMux) */
- GPIO_FN(SGPIO0_CLK),
- GPIO_FN(SGPIO0_LOAD),
- GPIO_FN(SGPIO0_DI),
- GPIO_FN(SGPIO0_DO),
- GPIO_FN(SGPIO2_CLK),
- GPIO_FN(SGPIO2_LOAD),
- GPIO_FN(SGPIO2_DI),
- GPIO_FN(SGPIO2_DO),
- GPIO_FN(COM1_TXD),
- GPIO_FN(COM1_RXD),
- GPIO_FN(COM1_RTS),
- GPIO_FN(COM1_CTS),
-
- /* PTP (mobule: EVC, ADC) */
-
- /* PTQ (mobule: LPC) */
- GPIO_FN(LAD3),
- GPIO_FN(LAD2),
- GPIO_FN(LAD1),
- GPIO_FN(LAD0),
- GPIO_FN(LFRAME),
- GPIO_FN(LRESET),
- GPIO_FN(LCLK),
-
- /* PTR (mobule: GRA, IIC) */
- GPIO_FN(DDC3),
- GPIO_FN(DDC2),
- GPIO_FN(SDA8),
- GPIO_FN(SCL8),
- GPIO_FN(SDA2),
- GPIO_FN(SCL2),
- GPIO_FN(SDA1),
- GPIO_FN(SCL1),
- GPIO_FN(SDA0),
- GPIO_FN(SCL0),
-
- /* PTS (mobule: GRA, IIC) */
- GPIO_FN(DDC1),
- GPIO_FN(DDC0),
- GPIO_FN(SDA9),
- GPIO_FN(SCL9),
- GPIO_FN(SDA5),
- GPIO_FN(SCL5),
- GPIO_FN(SDA4),
- GPIO_FN(SCL4),
- GPIO_FN(SDA3),
- GPIO_FN(SCL3),
-
- /* PTT (mobule: PWMX, AUD) */
- GPIO_FN(PWMX7),
- GPIO_FN(PWMX6),
- GPIO_FN(PWMX5),
- GPIO_FN(PWMX4),
- GPIO_FN(PWMX3),
- GPIO_FN(PWMX2),
- GPIO_FN(PWMX1),
- GPIO_FN(PWMX0),
- GPIO_FN(AUDATA3),
- GPIO_FN(AUDATA2),
- GPIO_FN(AUDATA1),
- GPIO_FN(AUDATA0),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
-
- /* PTU (mobule: LPC, APM) */
- GPIO_FN(LGPIO7),
- GPIO_FN(LGPIO6),
- GPIO_FN(LGPIO5),
- GPIO_FN(LGPIO4),
- GPIO_FN(LGPIO3),
- GPIO_FN(LGPIO2),
- GPIO_FN(LGPIO1),
- GPIO_FN(LGPIO0),
- GPIO_FN(APMONCTL_O),
- GPIO_FN(APMPWBTOUT_O),
- GPIO_FN(APMSCI_O),
- GPIO_FN(APMVDDON),
- GPIO_FN(APMSLPBTN),
- GPIO_FN(APMPWRBTN),
- GPIO_FN(APMS5N),
- GPIO_FN(APMS3N),
-
- /* PTV (mobule: LBSC, SerMux, R-SPI, EVC, GRA) */
- GPIO_FN(A23),
- GPIO_FN(A22),
- GPIO_FN(A21),
- GPIO_FN(A20),
- GPIO_FN(A19),
- GPIO_FN(A18),
- GPIO_FN(A17),
- GPIO_FN(A16),
- GPIO_FN(COM2_RI),
- GPIO_FN(R_SPI_MOSI),
- GPIO_FN(R_SPI_MISO),
- GPIO_FN(R_SPI_RSPCK),
- GPIO_FN(R_SPI_SSL0),
- GPIO_FN(R_SPI_SSL1),
- GPIO_FN(EVENT7),
- GPIO_FN(EVENT6),
- GPIO_FN(VBIOS_DI),
- GPIO_FN(VBIOS_DO),
- GPIO_FN(VBIOS_CLK),
- GPIO_FN(VBIOS_CS),
-
- /* PTW (mobule: LBSC, EVC, SCIF) */
- GPIO_FN(A15),
- GPIO_FN(A14),
- GPIO_FN(A13),
- GPIO_FN(A12),
- GPIO_FN(A11),
- GPIO_FN(A10),
- GPIO_FN(A9),
- GPIO_FN(A8),
- GPIO_FN(EVENT5),
- GPIO_FN(EVENT4),
- GPIO_FN(EVENT3),
- GPIO_FN(EVENT2),
- GPIO_FN(EVENT1),
- GPIO_FN(EVENT0),
- GPIO_FN(CTS4),
- GPIO_FN(CTS2),
-
- /* PTX (mobule: LBSC) */
- GPIO_FN(A7),
- GPIO_FN(A6),
- GPIO_FN(A5),
- GPIO_FN(A4),
- GPIO_FN(A3),
- GPIO_FN(A2),
- GPIO_FN(A1),
- GPIO_FN(A0),
- GPIO_FN(RTS2),
- GPIO_FN(SIM_D),
- GPIO_FN(SIM_CLK),
- GPIO_FN(SIM_RST),
-
- /* PTY (mobule: LBSC) */
- GPIO_FN(D7),
- GPIO_FN(D6),
- GPIO_FN(D5),
- GPIO_FN(D4),
- GPIO_FN(D3),
- GPIO_FN(D2),
- GPIO_FN(D1),
- GPIO_FN(D0),
-
- /* PTZ (mobule: eMMC, ONFI) */
- GPIO_FN(MMCDAT7),
- GPIO_FN(MMCDAT6),
- GPIO_FN(MMCDAT5),
- GPIO_FN(MMCDAT4),
- GPIO_FN(MMCDAT3),
- GPIO_FN(MMCDAT2),
- GPIO_FN(MMCDAT1),
- GPIO_FN(MMCDAT0),
- GPIO_FN(ON_DQ7),
- GPIO_FN(ON_DQ6),
- GPIO_FN(ON_DQ5),
- GPIO_FN(ON_DQ4),
- GPIO_FN(ON_DQ3),
- GPIO_FN(ON_DQ2),
- GPIO_FN(ON_DQ1),
- GPIO_FN(ON_DQ0),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffec0000, 16, 2, GROUP(
- PTA7_FN, PTA7_OUT, PTA7_IN, 0,
- PTA6_FN, PTA6_OUT, PTA6_IN, 0,
- PTA5_FN, PTA5_OUT, PTA5_IN, 0,
- PTA4_FN, PTA4_OUT, PTA4_IN, 0,
- PTA3_FN, PTA3_OUT, PTA3_IN, 0,
- PTA2_FN, PTA2_OUT, PTA2_IN, 0,
- PTA1_FN, PTA1_OUT, PTA1_IN, 0,
- PTA0_FN, PTA0_OUT, PTA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffec0002, 16, 2, GROUP(
- PTB7_FN, PTB7_OUT, PTB7_IN, 0,
- PTB6_FN, PTB6_OUT, PTB6_IN, 0,
- PTB5_FN, PTB5_OUT, PTB5_IN, 0,
- PTB4_FN, PTB4_OUT, PTB4_IN, 0,
- PTB3_FN, PTB3_OUT, PTB3_IN, 0,
- PTB2_FN, PTB2_OUT, PTB2_IN, 0,
- PTB1_FN, PTB1_OUT, PTB1_IN, 0,
- PTB0_FN, PTB0_OUT, PTB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffec0004, 16, 2, GROUP(
- PTC7_FN, PTC7_OUT, PTC7_IN, 0,
- PTC6_FN, PTC6_OUT, PTC6_IN, 0,
- PTC5_FN, PTC5_OUT, PTC5_IN, 0,
- PTC4_FN, PTC4_OUT, PTC4_IN, 0,
- PTC3_FN, PTC3_OUT, PTC3_IN, 0,
- PTC2_FN, PTC2_OUT, PTC2_IN, 0,
- PTC1_FN, PTC1_OUT, PTC1_IN, 0,
- PTC0_FN, PTC0_OUT, PTC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffec0006, 16, 2, GROUP(
- PTD7_FN, PTD7_OUT, PTD7_IN, 0,
- PTD6_FN, PTD6_OUT, PTD6_IN, 0,
- PTD5_FN, PTD5_OUT, PTD5_IN, 0,
- PTD4_FN, PTD4_OUT, PTD4_IN, 0,
- PTD3_FN, PTD3_OUT, PTD3_IN, 0,
- PTD2_FN, PTD2_OUT, PTD2_IN, 0,
- PTD1_FN, PTD1_OUT, PTD1_IN, 0,
- PTD0_FN, PTD0_OUT, PTD0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PECR", 0xffec0008, 16, 2, GROUP(
- PTE7_FN, PTE7_OUT, PTE7_IN, 0,
- PTE6_FN, PTE6_OUT, PTE6_IN, 0,
- PTE5_FN, PTE5_OUT, PTE5_IN, 0,
- PTE4_FN, PTE4_OUT, PTE4_IN, 0,
- PTE3_FN, PTE3_OUT, PTE3_IN, 0,
- PTE2_FN, PTE2_OUT, PTE2_IN, 0,
- PTE1_FN, PTE1_OUT, PTE1_IN, 0,
- PTE0_FN, PTE0_OUT, PTE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffec000a, 16, 2, GROUP(
- PTF7_FN, PTF7_OUT, PTF7_IN, 0,
- PTF6_FN, PTF6_OUT, PTF6_IN, 0,
- PTF5_FN, PTF5_OUT, PTF5_IN, 0,
- PTF4_FN, PTF4_OUT, PTF4_IN, 0,
- PTF3_FN, PTF3_OUT, PTF3_IN, 0,
- PTF2_FN, PTF2_OUT, PTF2_IN, 0,
- PTF1_FN, PTF1_OUT, PTF1_IN, 0,
- PTF0_FN, PTF0_OUT, PTF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffec000c, 16, 2, GROUP(
- PTG7_FN, PTG7_OUT, PTG7_IN, 0,
- PTG6_FN, PTG6_OUT, PTG6_IN, 0,
- PTG5_FN, PTG5_OUT, PTG5_IN, 0,
- PTG4_FN, PTG4_OUT, PTG4_IN, 0,
- PTG3_FN, PTG3_OUT, PTG3_IN, 0,
- PTG2_FN, PTG2_OUT, PTG2_IN, 0,
- PTG1_FN, PTG1_OUT, PTG1_IN, 0,
- PTG0_FN, PTG0_OUT, PTG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffec000e, 16, 2, GROUP(
- PTH7_FN, PTH7_OUT, PTH7_IN, 0,
- PTH6_FN, PTH6_OUT, PTH6_IN, 0,
- PTH5_FN, PTH5_OUT, PTH5_IN, 0,
- PTH4_FN, PTH4_OUT, PTH4_IN, 0,
- PTH3_FN, PTH3_OUT, PTH3_IN, 0,
- PTH2_FN, PTH2_OUT, PTH2_IN, 0,
- PTH1_FN, PTH1_OUT, PTH1_IN, 0,
- PTH0_FN, PTH0_OUT, PTH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PICR", 0xffec0010, 16, 2, GROUP(
- PTI7_FN, PTI7_OUT, PTI7_IN, 0,
- PTI6_FN, PTI6_OUT, PTI6_IN, 0,
- PTI5_FN, PTI5_OUT, PTI5_IN, 0,
- PTI4_FN, PTI4_OUT, PTI4_IN, 0,
- PTI3_FN, PTI3_OUT, PTI3_IN, 0,
- PTI2_FN, PTI2_OUT, PTI2_IN, 0,
- PTI1_FN, PTI1_OUT, PTI1_IN, 0,
- PTI0_FN, PTI0_OUT, PTI0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffec0012, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTJ6_FN, PTJ6_OUT, PTJ6_IN, 0,
- PTJ5_FN, PTJ5_OUT, PTJ5_IN, 0,
- PTJ4_FN, PTJ4_OUT, PTJ4_IN, 0,
- PTJ3_FN, PTJ3_OUT, PTJ3_IN, 0,
- PTJ2_FN, PTJ2_OUT, PTJ2_IN, 0,
- PTJ1_FN, PTJ1_OUT, PTJ1_IN, 0,
- PTJ0_FN, PTJ0_OUT, PTJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffec0014, 16, 2, GROUP(
- PTK7_FN, PTK7_OUT, PTK7_IN, 0,
- PTK6_FN, PTK6_OUT, PTK6_IN, 0,
- PTK5_FN, PTK5_OUT, PTK5_IN, 0,
- PTK4_FN, PTK4_OUT, PTK4_IN, 0,
- PTK3_FN, PTK3_OUT, PTK3_IN, 0,
- PTK2_FN, PTK2_OUT, PTK2_IN, 0,
- PTK1_FN, PTK1_OUT, PTK1_IN, 0,
- PTK0_FN, PTK0_OUT, PTK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffec0016, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTL6_FN, PTL6_OUT, PTL6_IN, 0,
- PTL5_FN, PTL5_OUT, PTL5_IN, 0,
- PTL4_FN, PTL4_OUT, PTL4_IN, 0,
- PTL3_FN, PTL3_OUT, PTL3_IN, 0,
- PTL2_FN, PTL2_OUT, PTL2_IN, 0,
- PTL1_FN, PTL1_OUT, PTL1_IN, 0,
- PTL0_FN, PTL0_OUT, PTL0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PMCR", 0xffec0018, 16, 2, GROUP(
- PTM7_FN, PTM7_OUT, PTM7_IN, 0,
- PTM6_FN, PTM6_OUT, PTM6_IN, 0,
- PTM5_FN, PTM5_OUT, PTM5_IN, 0,
- PTM4_FN, PTM4_OUT, PTM4_IN, 0,
- PTM3_FN, PTM3_OUT, PTM3_IN, 0,
- PTM2_FN, PTM2_OUT, PTM2_IN, 0,
- PTM1_FN, PTM1_OUT, PTM1_IN, 0,
- PTM0_FN, PTM0_OUT, PTM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffec001a, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTN6_FN, PTN6_OUT, PTN6_IN, 0,
- PTN5_FN, PTN5_OUT, PTN5_IN, 0,
- PTN4_FN, PTN4_OUT, PTN4_IN, 0,
- PTN3_FN, PTN3_OUT, PTN3_IN, 0,
- PTN2_FN, PTN2_OUT, PTN2_IN, 0,
- PTN1_FN, PTN1_OUT, PTN1_IN, 0,
- PTN0_FN, PTN0_OUT, PTN0_IN, 0 ))
- },
- { PINMUX_CFG_REG("POCR", 0xffec001c, 16, 2, GROUP(
- PTO7_FN, PTO7_OUT, PTO7_IN, 0,
- PTO6_FN, PTO6_OUT, PTO6_IN, 0,
- PTO5_FN, PTO5_OUT, PTO5_IN, 0,
- PTO4_FN, PTO4_OUT, PTO4_IN, 0,
- PTO3_FN, PTO3_OUT, PTO3_IN, 0,
- PTO2_FN, PTO2_OUT, PTO2_IN, 0,
- PTO1_FN, PTO1_OUT, PTO1_IN, 0,
- PTO0_FN, PTO0_OUT, PTO0_IN, 0 ))
- },
-#if 0 /* FIXME: Remove it? */
- { PINMUX_CFG_REG("PPCR", 0xffec001e, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTP6_FN, PTP6_OUT, PTP6_IN, 0,
- PTP5_FN, PTP5_OUT, PTP5_IN, 0,
- PTP4_FN, PTP4_OUT, PTP4_IN, 0,
- PTP3_FN, PTP3_OUT, PTP3_IN, 0,
- PTP2_FN, PTP2_OUT, PTP2_IN, 0,
- PTP1_FN, PTP1_OUT, PTP1_IN, 0,
- PTP0_FN, PTP0_OUT, PTP0_IN, 0 ))
- },
-#endif
- { PINMUX_CFG_REG("PQCR", 0xffec0020, 16, 2, GROUP(
- 0, 0, 0, 0, /* reserved: always set 1 */
- PTQ6_FN, PTQ6_OUT, PTQ6_IN, 0,
- PTQ5_FN, PTQ5_OUT, PTQ5_IN, 0,
- PTQ4_FN, PTQ4_OUT, PTQ4_IN, 0,
- PTQ3_FN, PTQ3_OUT, PTQ3_IN, 0,
- PTQ2_FN, PTQ2_OUT, PTQ2_IN, 0,
- PTQ1_FN, PTQ1_OUT, PTQ1_IN, 0,
- PTQ0_FN, PTQ0_OUT, PTQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PRCR", 0xffec0022, 16, 2, GROUP(
- PTR7_FN, PTR7_OUT, PTR7_IN, 0,
- PTR6_FN, PTR6_OUT, PTR6_IN, 0,
- PTR5_FN, PTR5_OUT, PTR5_IN, 0,
- PTR4_FN, PTR4_OUT, PTR4_IN, 0,
- PTR3_FN, PTR3_OUT, PTR3_IN, 0,
- PTR2_FN, PTR2_OUT, PTR2_IN, 0,
- PTR1_FN, PTR1_OUT, PTR1_IN, 0,
- PTR0_FN, PTR0_OUT, PTR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PSCR", 0xffec0024, 16, 2, GROUP(
- PTS7_FN, PTS7_OUT, PTS7_IN, 0,
- PTS6_FN, PTS6_OUT, PTS6_IN, 0,
- PTS5_FN, PTS5_OUT, PTS5_IN, 0,
- PTS4_FN, PTS4_OUT, PTS4_IN, 0,
- PTS3_FN, PTS3_OUT, PTS3_IN, 0,
- PTS2_FN, PTS2_OUT, PTS2_IN, 0,
- PTS1_FN, PTS1_OUT, PTS1_IN, 0,
- PTS0_FN, PTS0_OUT, PTS0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PTCR", 0xffec0026, 16, 2, GROUP(
- PTT7_FN, PTT7_OUT, PTT7_IN, 0,
- PTT6_FN, PTT6_OUT, PTT6_IN, 0,
- PTT5_FN, PTT5_OUT, PTT5_IN, 0,
- PTT4_FN, PTT4_OUT, PTT4_IN, 0,
- PTT3_FN, PTT3_OUT, PTT3_IN, 0,
- PTT2_FN, PTT2_OUT, PTT2_IN, 0,
- PTT1_FN, PTT1_OUT, PTT1_IN, 0,
- PTT0_FN, PTT0_OUT, PTT0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PUCR", 0xffec0028, 16, 2, GROUP(
- PTU7_FN, PTU7_OUT, PTU7_IN, 0,
- PTU6_FN, PTU6_OUT, PTU6_IN, 0,
- PTU5_FN, PTU5_OUT, PTU5_IN, 0,
- PTU4_FN, PTU4_OUT, PTU4_IN, 0,
- PTU3_FN, PTU3_OUT, PTU3_IN, 0,
- PTU2_FN, PTU2_OUT, PTU2_IN, 0,
- PTU1_FN, PTU1_OUT, PTU1_IN, 0,
- PTU0_FN, PTU0_OUT, PTU0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PVCR", 0xffec002a, 16, 2, GROUP(
- PTV7_FN, PTV7_OUT, PTV7_IN, 0,
- PTV6_FN, PTV6_OUT, PTV6_IN, 0,
- PTV5_FN, PTV5_OUT, PTV5_IN, 0,
- PTV4_FN, PTV4_OUT, PTV4_IN, 0,
- PTV3_FN, PTV3_OUT, PTV3_IN, 0,
- PTV2_FN, PTV2_OUT, PTV2_IN, 0,
- PTV1_FN, PTV1_OUT, PTV1_IN, 0,
- PTV0_FN, PTV0_OUT, PTV0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PWCR", 0xffec002c, 16, 2, GROUP(
- PTW7_FN, PTW7_OUT, PTW7_IN, 0,
- PTW6_FN, PTW6_OUT, PTW6_IN, 0,
- PTW5_FN, PTW5_OUT, PTW5_IN, 0,
- PTW4_FN, PTW4_OUT, PTW4_IN, 0,
- PTW3_FN, PTW3_OUT, PTW3_IN, 0,
- PTW2_FN, PTW2_OUT, PTW2_IN, 0,
- PTW1_FN, PTW1_OUT, PTW1_IN, 0,
- PTW0_FN, PTW0_OUT, PTW0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PXCR", 0xffec002e, 16, 2, GROUP(
- PTX7_FN, PTX7_OUT, PTX7_IN, 0,
- PTX6_FN, PTX6_OUT, PTX6_IN, 0,
- PTX5_FN, PTX5_OUT, PTX5_IN, 0,
- PTX4_FN, PTX4_OUT, PTX4_IN, 0,
- PTX3_FN, PTX3_OUT, PTX3_IN, 0,
- PTX2_FN, PTX2_OUT, PTX2_IN, 0,
- PTX1_FN, PTX1_OUT, PTX1_IN, 0,
- PTX0_FN, PTX0_OUT, PTX0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PYCR", 0xffec0030, 16, 2, GROUP(
- PTY7_FN, PTY7_OUT, PTY7_IN, 0,
- PTY6_FN, PTY6_OUT, PTY6_IN, 0,
- PTY5_FN, PTY5_OUT, PTY5_IN, 0,
- PTY4_FN, PTY4_OUT, PTY4_IN, 0,
- PTY3_FN, PTY3_OUT, PTY3_IN, 0,
- PTY2_FN, PTY2_OUT, PTY2_IN, 0,
- PTY1_FN, PTY1_OUT, PTY1_IN, 0,
- PTY0_FN, PTY0_OUT, PTY0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PZCR", 0xffec0032, 16, 2, GROUP(
- PTZ7_FN, PTZ7_OUT, PTZ7_IN, 0,
- PTZ6_FN, PTZ6_OUT, PTZ6_IN, 0,
- PTZ5_FN, PTZ5_OUT, PTZ5_IN, 0,
- PTZ4_FN, PTZ4_OUT, PTZ4_IN, 0,
- PTZ3_FN, PTZ3_OUT, PTZ3_IN, 0,
- PTZ2_FN, PTZ2_OUT, PTZ2_IN, 0,
- PTZ1_FN, PTZ1_OUT, PTZ1_IN, 0,
- PTZ0_FN, PTZ0_OUT, PTZ0_IN, 0 ))
- },
-
- { PINMUX_CFG_REG("PSEL0", 0xffec0070, 16, 1, GROUP(
- PS0_15_FN1, PS0_15_FN2,
- PS0_14_FN1, PS0_14_FN2,
- PS0_13_FN1, PS0_13_FN2,
- PS0_12_FN1, PS0_12_FN2,
- PS0_11_FN1, PS0_11_FN2,
- PS0_10_FN1, PS0_10_FN2,
- PS0_9_FN1, PS0_9_FN2,
- PS0_8_FN1, PS0_8_FN2,
- PS0_7_FN1, PS0_7_FN2,
- PS0_6_FN1, PS0_6_FN2,
- PS0_5_FN1, PS0_5_FN2,
- PS0_4_FN1, PS0_4_FN2,
- PS0_3_FN1, PS0_3_FN2,
- PS0_2_FN1, PS0_2_FN2,
- 0, 0,
- 0, 0, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL1", 0xffec0072, 16,
- GROUP(-5, 1, 1, 1, -5, 1, -2),
- GROUP(
- /* RESERVED [5] */
- PS1_10_FN1, PS1_10_FN2,
- PS1_9_FN1, PS1_9_FN2,
- PS1_8_FN1, PS1_8_FN2,
- /* RESERVED [5] */
- PS1_2_FN1, PS1_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL2", 0xffec0074, 16,
- GROUP(-2, 1, 1, -4, 1, 1, 1, 1, -1, 1, -2),
- GROUP(
- /* RESERVED [2] */
- PS2_13_FN1, PS2_13_FN2,
- PS2_12_FN1, PS2_12_FN2,
- /* RESERVED [4] */
- PS2_7_FN1, PS2_7_FN2,
- PS2_6_FN1, PS2_6_FN2,
- PS2_5_FN1, PS2_5_FN2,
- PS2_4_FN1, PS2_4_FN2,
- /* RESERVED [1] */
- PS2_2_FN1, PS2_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL3", 0xffec0076, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, -4, 1, 1, -1),
- GROUP(
- PS3_15_FN1, PS3_15_FN2,
- PS3_14_FN1, PS3_14_FN2,
- PS3_13_FN1, PS3_13_FN2,
- PS3_12_FN1, PS3_12_FN2,
- PS3_11_FN1, PS3_11_FN2,
- PS3_10_FN1, PS3_10_FN2,
- PS3_9_FN1, PS3_9_FN2,
- PS3_8_FN1, PS3_8_FN2,
- PS3_7_FN1, PS3_7_FN2,
- /* RESERVED [4] */
- PS3_2_FN1, PS3_2_FN2,
- PS3_1_FN1, PS3_1_FN2,
- /* RESERVED [1] */ ))
- },
-
- { PINMUX_CFG_REG_VAR("PSEL4", 0xffec0078, 16,
- GROUP(-1, 1, 1, 1, -1, 1, 1, 1, -3, 1, 1, 1,
- 1, 1),
- GROUP(
- /* RESERVED [1] */
- PS4_14_FN1, PS4_14_FN2,
- PS4_13_FN1, PS4_13_FN2,
- PS4_12_FN1, PS4_12_FN2,
- /* RESERVED [1] */
- PS4_10_FN1, PS4_10_FN2,
- PS4_9_FN1, PS4_9_FN2,
- PS4_8_FN1, PS4_8_FN2,
- /* RESERVED [3] */
- PS4_4_FN1, PS4_4_FN2,
- PS4_3_FN1, PS4_3_FN2,
- PS4_2_FN1, PS4_2_FN2,
- PS4_1_FN1, PS4_1_FN2,
- PS4_0_FN1, PS4_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL5", 0xffec007a, 16,
- GROUP(-4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -2),
- GROUP(
- /* RESERVED [4] */
- PS5_11_FN1, PS5_11_FN2,
- PS5_10_FN1, PS5_10_FN2,
- PS5_9_FN1, PS5_9_FN2,
- PS5_8_FN1, PS5_8_FN2,
- PS5_7_FN1, PS5_7_FN2,
- PS5_6_FN1, PS5_6_FN2,
- PS5_5_FN1, PS5_5_FN2,
- PS5_4_FN1, PS5_4_FN2,
- PS5_3_FN1, PS5_3_FN2,
- PS5_2_FN1, PS5_2_FN2,
- /* RESERVED [2] */ ))
- },
- { PINMUX_CFG_REG("PSEL6", 0xffec007c, 16, 1, GROUP(
- PS6_15_FN1, PS6_15_FN2,
- PS6_14_FN1, PS6_14_FN2,
- PS6_13_FN1, PS6_13_FN2,
- PS6_12_FN1, PS6_12_FN2,
- PS6_11_FN1, PS6_11_FN2,
- PS6_10_FN1, PS6_10_FN2,
- PS6_9_FN1, PS6_9_FN2,
- PS6_8_FN1, PS6_8_FN2,
- PS6_7_FN1, PS6_7_FN2,
- PS6_6_FN1, PS6_6_FN2,
- PS6_5_FN1, PS6_5_FN2,
- PS6_4_FN1, PS6_4_FN2,
- PS6_3_FN1, PS6_3_FN2,
- PS6_2_FN1, PS6_2_FN2,
- PS6_1_FN1, PS6_1_FN2,
- PS6_0_FN1, PS6_0_FN2, ))
- },
- { PINMUX_CFG_REG_VAR("PSEL7", 0xffec0082, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -5),
- GROUP(
- PS7_15_FN1, PS7_15_FN2,
- PS7_14_FN1, PS7_14_FN2,
- PS7_13_FN1, PS7_13_FN2,
- PS7_12_FN1, PS7_12_FN2,
- PS7_11_FN1, PS7_11_FN2,
- PS7_10_FN1, PS7_10_FN2,
- PS7_9_FN1, PS7_9_FN2,
- PS7_8_FN1, PS7_8_FN2,
- PS7_7_FN1, PS7_7_FN2,
- PS7_6_FN1, PS7_6_FN2,
- PS7_5_FN1, PS7_5_FN2,
- /* RESERVED [5] */ ))
- },
- { PINMUX_CFG_REG_VAR("PSEL8", 0xffec0084, 16,
- GROUP(1, 1, 1, 1, 1, 1, 1, 1, -8),
- GROUP(
- PS8_15_FN1, PS8_15_FN2,
- PS8_14_FN1, PS8_14_FN2,
- PS8_13_FN1, PS8_13_FN2,
- PS8_12_FN1, PS8_12_FN2,
- PS8_11_FN1, PS8_11_FN2,
- PS8_10_FN1, PS8_10_FN2,
- PS8_9_FN1, PS8_9_FN2,
- PS8_8_FN1, PS8_8_FN2,
- /* RESERVED [8] */ ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffec0034, 8, GROUP(
- PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
- PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffec0036, 8, GROUP(
- PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
- PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffec0038, 8, GROUP(
- PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
- PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffec003a, 8, GROUP(
- PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
- PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffec003c, 8, GROUP(
- PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
- PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffec003e, 8, GROUP(
- PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
- PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffec0040, 8, GROUP(
- PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
- PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffec0042, 8, GROUP(
- PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
- PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA ))
- },
- { PINMUX_DATA_REG("PIDR", 0xffec0044, 8, GROUP(
- PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
- PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffec0046, 8, GROUP(
- 0, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
- PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffec0048, 8, GROUP(
- PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
- PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffec004a, 8, GROUP(
- 0, PTL6_DATA, PTL5_DATA, PTL4_DATA,
- PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffec004c, 8, GROUP(
- PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
- PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffec004e, 8, GROUP(
- 0, PTN6_DATA, PTN5_DATA, PTN4_DATA,
- PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA ))
- },
- { PINMUX_DATA_REG("PODR", 0xffec0050, 8, GROUP(
- PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
- PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffec0052, 8, GROUP(
- PTP7_DATA, PTP6_DATA, PTP5_DATA, PTP4_DATA,
- PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffec0054, 8, GROUP(
- 0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
- PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffec0056, 8, GROUP(
- PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
- PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA ))
- },
- { PINMUX_DATA_REG("PSDR", 0xffec0058, 8, GROUP(
- PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
- PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA ))
- },
- { PINMUX_DATA_REG("PTDR", 0xffec005a, 8, GROUP(
- PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
- PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA ))
- },
- { PINMUX_DATA_REG("PUDR", 0xffec005c, 8, GROUP(
- PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
- PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA ))
- },
- { PINMUX_DATA_REG("PVDR", 0xffec005e, 8, GROUP(
- PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
- PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA ))
- },
- { PINMUX_DATA_REG("PWDR", 0xffec0060, 8, GROUP(
- PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
- PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA ))
- },
- { PINMUX_DATA_REG("PXDR", 0xffec0062, 8, GROUP(
- PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
- PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA ))
- },
- { PINMUX_DATA_REG("PYDR", 0xffec0064, 8, GROUP(
- PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
- PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA ))
- },
- { PINMUX_DATA_REG("PZDR", 0xffec0066, 8, GROUP(
- PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
- PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7757_pinmux_info = {
- .name = "sh7757_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7785.c b/drivers/pinctrl/renesas/pfc-sh7785.c
deleted file mode 100644
index 126b663bb6eb3a..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7785.c
+++ /dev/null
@@ -1,1258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7785 Pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7785.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA,
- PM1_DATA, PM0_DATA,
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA,
- PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA,
- PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
- PK7_IN, PK6_IN, PK5_IN, PK4_IN,
- PK3_IN, PK2_IN, PK1_IN, PK0_IN,
- PL7_IN, PL6_IN, PL5_IN, PL4_IN,
- PL3_IN, PL2_IN, PL1_IN, PL0_IN,
- PM1_IN, PM0_IN,
- PN7_IN, PN6_IN, PN5_IN, PN4_IN,
- PN3_IN, PN2_IN, PN1_IN, PN0_IN,
- PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN,
- PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN,
- PR3_IN, PR2_IN, PR1_IN, PR0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
- PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
- PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
- PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT,
- PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT,
- PM1_OUT, PM0_OUT,
- PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT,
- PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT,
- PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT,
- PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT,
- PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN,
- PK7_FN, PK6_FN, PK5_FN, PK4_FN,
- PK3_FN, PK2_FN, PK1_FN, PK0_FN,
- PL7_FN, PL6_FN, PL5_FN, PL4_FN,
- PL3_FN, PL2_FN, PL1_FN, PL0_FN,
- PM1_FN, PM0_FN,
- PN7_FN, PN6_FN, PN5_FN, PN4_FN,
- PN3_FN, PN2_FN, PN1_FN, PN0_FN,
- PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN,
- PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN,
- PR3_FN, PR2_FN, PR1_FN, PR0_FN,
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- D63_AD31_MARK,
- D62_AD30_MARK,
- D61_AD29_MARK,
- D60_AD28_MARK,
- D59_AD27_MARK,
- D58_AD26_MARK,
- D57_AD25_MARK,
- D56_AD24_MARK,
- D55_AD23_MARK,
- D54_AD22_MARK,
- D53_AD21_MARK,
- D52_AD20_MARK,
- D51_AD19_MARK,
- D50_AD18_MARK,
- D49_AD17_DB5_MARK,
- D48_AD16_DB4_MARK,
- D47_AD15_DB3_MARK,
- D46_AD14_DB2_MARK,
- D45_AD13_DB1_MARK,
- D44_AD12_DB0_MARK,
- D43_AD11_DG5_MARK,
- D42_AD10_DG4_MARK,
- D41_AD9_DG3_MARK,
- D40_AD8_DG2_MARK,
- D39_AD7_DG1_MARK,
- D38_AD6_DG0_MARK,
- D37_AD5_DR5_MARK,
- D36_AD4_DR4_MARK,
- D35_AD3_DR3_MARK,
- D34_AD2_DR2_MARK,
- D33_AD1_DR1_MARK,
- D32_AD0_DR0_MARK,
- REQ1_MARK,
- REQ2_MARK,
- REQ3_MARK,
- GNT1_MARK,
- GNT2_MARK,
- GNT3_MARK,
- MMCCLK_MARK,
- D31_MARK,
- D30_MARK,
- D29_MARK,
- D28_MARK,
- D27_MARK,
- D26_MARK,
- D25_MARK,
- D24_MARK,
- D23_MARK,
- D22_MARK,
- D21_MARK,
- D20_MARK,
- D19_MARK,
- D18_MARK,
- D17_MARK,
- D16_MARK,
- SCIF1_SCK_MARK,
- SCIF1_RXD_MARK,
- SCIF1_TXD_MARK,
- SCIF0_CTS_MARK,
- INTD_MARK,
- FCE_MARK,
- SCIF0_RTS_MARK,
- HSPI_CS_MARK,
- FSE_MARK,
- SCIF0_SCK_MARK,
- HSPI_CLK_MARK,
- FRE_MARK,
- SCIF0_RXD_MARK,
- HSPI_RX_MARK,
- FRB_MARK,
- SCIF0_TXD_MARK,
- HSPI_TX_MARK,
- FWE_MARK,
- SCIF5_TXD_MARK,
- HAC1_SYNC_MARK,
- SSI1_WS_MARK,
- SIOF_TXD_PJ_MARK,
- HAC0_SDOUT_MARK,
- SSI0_SDATA_MARK,
- SIOF_RXD_PJ_MARK,
- HAC0_SDIN_MARK,
- SSI0_SCK_MARK,
- SIOF_SYNC_PJ_MARK,
- HAC0_SYNC_MARK,
- SSI0_WS_MARK,
- SIOF_MCLK_PJ_MARK,
- HAC_RES_MARK,
- SIOF_SCK_PJ_MARK,
- HAC0_BITCLK_MARK,
- SSI0_CLK_MARK,
- HAC1_BITCLK_MARK,
- SSI1_CLK_MARK,
- TCLK_MARK,
- IOIS16_MARK,
- STATUS0_MARK,
- DRAK0_PK3_MARK,
- STATUS1_MARK,
- DRAK1_PK2_MARK,
- DACK2_MARK,
- SCIF2_TXD_MARK,
- MMCCMD_MARK,
- SIOF_TXD_PK_MARK,
- DACK3_MARK,
- SCIF2_SCK_MARK,
- MMCDAT_MARK,
- SIOF_SCK_PK_MARK,
- DREQ0_MARK,
- DREQ1_MARK,
- DRAK0_PK1_MARK,
- DRAK1_PK0_MARK,
- DREQ2_MARK,
- INTB_MARK,
- DREQ3_MARK,
- INTC_MARK,
- DRAK2_MARK,
- CE2A_MARK,
- IRL4_MARK,
- FD4_MARK,
- IRL5_MARK,
- FD5_MARK,
- IRL6_MARK,
- FD6_MARK,
- IRL7_MARK,
- FD7_MARK,
- DRAK3_MARK,
- CE2B_MARK,
- BREQ_BSACK_MARK,
- BACK_BSREQ_MARK,
- SCIF5_RXD_MARK,
- HAC1_SDIN_MARK,
- SSI1_SCK_MARK,
- SCIF5_SCK_MARK,
- HAC1_SDOUT_MARK,
- SSI1_SDATA_MARK,
- SCIF3_TXD_MARK,
- FCLE_MARK,
- SCIF3_RXD_MARK,
- FALE_MARK,
- SCIF3_SCK_MARK,
- FD0_MARK,
- SCIF4_TXD_MARK,
- FD1_MARK,
- SCIF4_RXD_MARK,
- FD2_MARK,
- SCIF4_SCK_MARK,
- FD3_MARK,
- DEVSEL_DCLKOUT_MARK,
- STOP_CDE_MARK,
- LOCK_ODDF_MARK,
- TRDY_DISPL_MARK,
- IRDY_HSYNC_MARK,
- PCIFRAME_VSYNC_MARK,
- INTA_MARK,
- GNT0_GNTIN_MARK,
- REQ0_REQOUT_MARK,
- PERR_MARK,
- SERR_MARK,
- WE7_CBE3_MARK,
- WE6_CBE2_MARK,
- WE5_CBE1_MARK,
- WE4_CBE0_MARK,
- SCIF2_RXD_MARK,
- SIOF_RXD_MARK,
- MRESETOUT_MARK,
- IRQOUT_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
- PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT),
-
- /* PK GPIO */
- PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT),
- PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT),
- PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT),
- PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT),
- PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT),
- PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT),
- PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT),
- PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT),
-
- /* PL GPIO */
- PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT),
- PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT),
- PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT),
- PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT),
- PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT),
- PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT),
- PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT),
- PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT),
-
- /* PM GPIO */
- PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT),
- PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT),
-
- /* PN GPIO */
- PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT),
- PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT),
- PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT),
- PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT),
- PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT),
- PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT),
- PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT),
- PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT),
-
- /* PP GPIO */
- PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT),
- PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT),
- PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT),
- PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT),
- PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT),
- PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT),
-
- /* PQ GPIO */
- PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT),
- PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT),
- PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT),
- PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT),
- PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT),
-
- /* PR GPIO */
- PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT),
- PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT),
- PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT),
- PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D63_AD31_MARK, PA7_FN),
- PINMUX_DATA(D62_AD30_MARK, PA6_FN),
- PINMUX_DATA(D61_AD29_MARK, PA5_FN),
- PINMUX_DATA(D60_AD28_MARK, PA4_FN),
- PINMUX_DATA(D59_AD27_MARK, PA3_FN),
- PINMUX_DATA(D58_AD26_MARK, PA2_FN),
- PINMUX_DATA(D57_AD25_MARK, PA1_FN),
- PINMUX_DATA(D56_AD24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D55_AD23_MARK, PB7_FN),
- PINMUX_DATA(D54_AD22_MARK, PB6_FN),
- PINMUX_DATA(D53_AD21_MARK, PB5_FN),
- PINMUX_DATA(D52_AD20_MARK, PB4_FN),
- PINMUX_DATA(D51_AD19_MARK, PB3_FN),
- PINMUX_DATA(D50_AD18_MARK, PB2_FN),
- PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN),
- PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN),
- PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN),
- PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN),
- PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN),
- PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN),
- PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN),
- PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN),
- PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN),
- PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN),
- PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN),
- PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN),
- PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN),
- PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN),
- PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN),
- PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(REQ1_MARK, PE5_FN),
- PINMUX_DATA(REQ2_MARK, PE4_FN),
- PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN),
- PINMUX_DATA(GNT1_MARK, PE2_FN),
- PINMUX_DATA(GNT2_MARK, PE1_FN),
- PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN),
- PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(D31_MARK, PF7_FN),
- PINMUX_DATA(D30_MARK, PF6_FN),
- PINMUX_DATA(D29_MARK, PF5_FN),
- PINMUX_DATA(D28_MARK, PF4_FN),
- PINMUX_DATA(D27_MARK, PF3_FN),
- PINMUX_DATA(D26_MARK, PF2_FN),
- PINMUX_DATA(D25_MARK, PF1_FN),
- PINMUX_DATA(D24_MARK, PF0_FN),
-
- /* PF FN */
- PINMUX_DATA(D23_MARK, PG7_FN),
- PINMUX_DATA(D22_MARK, PG6_FN),
- PINMUX_DATA(D21_MARK, PG5_FN),
- PINMUX_DATA(D20_MARK, PG4_FN),
- PINMUX_DATA(D19_MARK, PG3_FN),
- PINMUX_DATA(D18_MARK, PG2_FN),
- PINMUX_DATA(D17_MARK, PG1_FN),
- PINMUX_DATA(D16_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN),
- PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN),
- PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN),
- PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN),
- PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN),
- PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN),
- PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN),
- PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN),
- PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN),
- PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN),
- PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN),
- PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN),
- PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN),
- PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN),
- PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN),
-
- /* PK FN */
- PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN),
- PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN),
- PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN),
- PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN),
- PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN),
- PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK5_FN),
- PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN),
- PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1,
- P1MSEL12_0, P1MSEL11_1, PK4_FN),
- PINMUX_DATA(DREQ0_MARK, PK3_FN),
- PINMUX_DATA(DREQ1_MARK, PK2_FN),
- PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN),
- PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN),
-
- /* PL FN */
- PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN),
- PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN),
- PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN),
- PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN),
- PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN),
- PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN),
- PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN),
- PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN),
- PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN),
- PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN),
- PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN),
- PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN),
- PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN),
- PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN),
- PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN),
- PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN),
-
- /* PM FN */
- PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN),
- PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN),
-
- /* PN FN */
- PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN),
- PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN),
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN),
- PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN),
- PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN),
- PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN),
- PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN),
-
- /* PP FN */
- PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN),
- PINMUX_DATA(STOP_CDE_MARK, PP4_FN),
- PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN),
- PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN),
- PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN),
- PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN),
-
- /* PQ FN */
- PINMUX_DATA(INTA_MARK, PQ4_FN),
- PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN),
- PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN),
- PINMUX_DATA(PERR_MARK, PQ1_FN),
- PINMUX_DATA(SERR_MARK, PQ0_FN),
-
- /* PR FN */
- PINMUX_DATA(WE7_CBE3_MARK, PR3_FN),
- PINMUX_DATA(WE6_CBE2_MARK, PR2_FN),
- PINMUX_DATA(WE5_CBE1_MARK, PR1_FN),
- PINMUX_DATA(WE4_CBE0_MARK, PR0_FN),
-
- /* MISC FN */
- PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0),
- PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0),
- PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0),
- PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
- PINMUX_GPIO(PJ0),
-
- /* PK */
- PINMUX_GPIO(PK7),
- PINMUX_GPIO(PK6),
- PINMUX_GPIO(PK5),
- PINMUX_GPIO(PK4),
- PINMUX_GPIO(PK3),
- PINMUX_GPIO(PK2),
- PINMUX_GPIO(PK1),
- PINMUX_GPIO(PK0),
-
- /* PL */
- PINMUX_GPIO(PL7),
- PINMUX_GPIO(PL6),
- PINMUX_GPIO(PL5),
- PINMUX_GPIO(PL4),
- PINMUX_GPIO(PL3),
- PINMUX_GPIO(PL2),
- PINMUX_GPIO(PL1),
- PINMUX_GPIO(PL0),
-
- /* PM */
- PINMUX_GPIO(PM1),
- PINMUX_GPIO(PM0),
-
- /* PN */
- PINMUX_GPIO(PN7),
- PINMUX_GPIO(PN6),
- PINMUX_GPIO(PN5),
- PINMUX_GPIO(PN4),
- PINMUX_GPIO(PN3),
- PINMUX_GPIO(PN2),
- PINMUX_GPIO(PN1),
- PINMUX_GPIO(PN0),
-
- /* PP */
- PINMUX_GPIO(PP5),
- PINMUX_GPIO(PP4),
- PINMUX_GPIO(PP3),
- PINMUX_GPIO(PP2),
- PINMUX_GPIO(PP1),
- PINMUX_GPIO(PP0),
-
- /* PQ */
- PINMUX_GPIO(PQ4),
- PINMUX_GPIO(PQ3),
- PINMUX_GPIO(PQ2),
- PINMUX_GPIO(PQ1),
- PINMUX_GPIO(PQ0),
-
- /* PR */
- PINMUX_GPIO(PR3),
- PINMUX_GPIO(PR2),
- PINMUX_GPIO(PR1),
- PINMUX_GPIO(PR0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D63_AD31),
- GPIO_FN(D62_AD30),
- GPIO_FN(D61_AD29),
- GPIO_FN(D60_AD28),
- GPIO_FN(D59_AD27),
- GPIO_FN(D58_AD26),
- GPIO_FN(D57_AD25),
- GPIO_FN(D56_AD24),
- GPIO_FN(D55_AD23),
- GPIO_FN(D54_AD22),
- GPIO_FN(D53_AD21),
- GPIO_FN(D52_AD20),
- GPIO_FN(D51_AD19),
- GPIO_FN(D50_AD18),
- GPIO_FN(D49_AD17_DB5),
- GPIO_FN(D48_AD16_DB4),
- GPIO_FN(D47_AD15_DB3),
- GPIO_FN(D46_AD14_DB2),
- GPIO_FN(D45_AD13_DB1),
- GPIO_FN(D44_AD12_DB0),
- GPIO_FN(D43_AD11_DG5),
- GPIO_FN(D42_AD10_DG4),
- GPIO_FN(D41_AD9_DG3),
- GPIO_FN(D40_AD8_DG2),
- GPIO_FN(D39_AD7_DG1),
- GPIO_FN(D38_AD6_DG0),
- GPIO_FN(D37_AD5_DR5),
- GPIO_FN(D36_AD4_DR4),
- GPIO_FN(D35_AD3_DR3),
- GPIO_FN(D34_AD2_DR2),
- GPIO_FN(D33_AD1_DR1),
- GPIO_FN(D32_AD0_DR0),
- GPIO_FN(REQ1),
- GPIO_FN(REQ2),
- GPIO_FN(REQ3),
- GPIO_FN(GNT1),
- GPIO_FN(GNT2),
- GPIO_FN(GNT3),
- GPIO_FN(MMCCLK),
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(INTD),
- GPIO_FN(FCE),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(HSPI_CS),
- GPIO_FN(FSE),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(FRE),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(HSPI_RX),
- GPIO_FN(FRB),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(HSPI_TX),
- GPIO_FN(FWE),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SIOF_TXD_PJ),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SIOF_RXD_PJ),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SIOF_SYNC_PJ),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SIOF_MCLK_PJ),
- GPIO_FN(HAC_RES),
- GPIO_FN(SIOF_SCK_PJ),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(TCLK),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS0),
- GPIO_FN(DRAK0_PK3),
- GPIO_FN(STATUS1),
- GPIO_FN(DRAK1_PK2),
- GPIO_FN(DACK2),
- GPIO_FN(SCIF2_TXD),
- GPIO_FN(MMCCMD),
- GPIO_FN(SIOF_TXD_PK),
- GPIO_FN(DACK3),
- GPIO_FN(SCIF2_SCK),
- GPIO_FN(MMCDAT),
- GPIO_FN(SIOF_SCK_PK),
- GPIO_FN(DREQ0),
- GPIO_FN(DREQ1),
- GPIO_FN(DRAK0_PK1),
- GPIO_FN(DRAK1_PK0),
- GPIO_FN(DREQ2),
- GPIO_FN(INTB),
- GPIO_FN(DREQ3),
- GPIO_FN(INTC),
- GPIO_FN(DRAK2),
- GPIO_FN(CE2A),
- GPIO_FN(IRL4),
- GPIO_FN(FD4),
- GPIO_FN(IRL5),
- GPIO_FN(FD5),
- GPIO_FN(IRL6),
- GPIO_FN(FD6),
- GPIO_FN(IRL7),
- GPIO_FN(FD7),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2B),
- GPIO_FN(BREQ_BSACK),
- GPIO_FN(BACK_BSREQ),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(FCLE),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(FALE),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(FD0),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(FD1),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(FD2),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(FD3),
- GPIO_FN(DEVSEL_DCLKOUT),
- GPIO_FN(STOP_CDE),
- GPIO_FN(LOCK_ODDF),
- GPIO_FN(TRDY_DISPL),
- GPIO_FN(IRDY_HSYNC),
- GPIO_FN(PCIFRAME_VSYNC),
- GPIO_FN(INTA),
- GPIO_FN(GNT0_GNTIN),
- GPIO_FN(REQ0_REQOUT),
- GPIO_FN(PERR),
- GPIO_FN(SERR),
- GPIO_FN(WE7_CBE3),
- GPIO_FN(WE6_CBE2),
- GPIO_FN(WE5_CBE1),
- GPIO_FN(WE4_CBE0),
- GPIO_FN(SCIF2_RXD),
- GPIO_FN(SIOF_RXD),
- GPIO_FN(MRESETOUT),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffe70008, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- PJ0_FN, PJ0_OUT, PJ0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2, GROUP(
- PK7_FN, PK7_OUT, PK7_IN, 0,
- PK6_FN, PK6_OUT, PK6_IN, 0,
- PK5_FN, PK5_OUT, PK5_IN, 0,
- PK4_FN, PK4_OUT, PK4_IN, 0,
- PK3_FN, PK3_OUT, PK3_IN, 0,
- PK2_FN, PK2_OUT, PK2_IN, 0,
- PK1_FN, PK1_OUT, PK1_IN, 0,
- PK0_FN, PK0_OUT, PK0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2, GROUP(
- PL7_FN, PL7_OUT, PL7_IN, 0,
- PL6_FN, PL6_OUT, PL6_IN, 0,
- PL5_FN, PL5_OUT, PL5_IN, 0,
- PL4_FN, PL4_OUT, PL4_IN, 0,
- PL3_FN, PL3_OUT, PL3_IN, 0,
- PL2_FN, PL2_OUT, PL2_IN, 0,
- PL1_FN, PL1_OUT, PL1_IN, 0,
- PL0_FN, PL0_OUT, PL0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PMCR", 0xffe70016, 16,
- GROUP(-12, 2, 2),
- GROUP(
- /* RESERVED [12] */
- PM1_FN, PM1_OUT, PM1_IN, 0,
- PM0_FN, PM0_OUT, PM0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2, GROUP(
- PN7_FN, PN7_OUT, PN7_IN, 0,
- PN6_FN, PN6_OUT, PN6_IN, 0,
- PN5_FN, PN5_OUT, PN5_IN, 0,
- PN4_FN, PN4_OUT, PN4_IN, 0,
- PN3_FN, PN3_OUT, PN3_IN, 0,
- PN2_FN, PN2_OUT, PN2_IN, 0,
- PN1_FN, PN1_OUT, PN1_IN, 0,
- PN0_FN, PN0_OUT, PN0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PPCR", 0xffe7001a, 16,
- GROUP(-4, 2, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [4] */
- PP5_FN, PP5_OUT, PP5_IN, 0,
- PP4_FN, PP4_OUT, PP4_IN, 0,
- PP3_FN, PP3_OUT, PP3_IN, 0,
- PP2_FN, PP2_OUT, PP2_IN, 0,
- PP1_FN, PP1_OUT, PP1_IN, 0,
- PP0_FN, PP0_OUT, PP0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PQCR", 0xffe7001c, 16,
- GROUP(-6, 2, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [6] */
- PQ4_FN, PQ4_OUT, PQ4_IN, 0,
- PQ3_FN, PQ3_OUT, PQ3_IN, 0,
- PQ2_FN, PQ2_OUT, PQ2_IN, 0,
- PQ1_FN, PQ1_OUT, PQ1_IN, 0,
- PQ0_FN, PQ0_OUT, PQ0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PRCR", 0xffe7001e, 16,
- GROUP(-8, 2, 2, 2, 2),
- GROUP(
- /* RESERVED [8] */
- PR3_FN, PR3_OUT, PR3_IN, 0,
- PR2_FN, PR2_OUT, PR2_IN, 0,
- PR1_FN, PR1_OUT, PR1_IN, 0,
- PR0_FN, PR0_OUT, PR0_IN, 0 ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1, GROUP(
- P1MSEL15_0, P1MSEL15_1,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, 0,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG_VAR("P2MSELR", 0xffe70082, 16,
- GROUP(-13, 1, 1, 1),
- GROUP(
- /* RESERVED [13] */
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffe70020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffe70022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffe70024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffe70026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffe70028, 8, GROUP(
- 0, 0, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffe7002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffe7002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffe7002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffe70030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA ))
- },
- { PINMUX_DATA_REG("PKDR", 0xffe70032, 8, GROUP(
- PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
- PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA ))
- },
- { PINMUX_DATA_REG("PLDR", 0xffe70034, 8, GROUP(
- PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
- PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA ))
- },
- { PINMUX_DATA_REG("PMDR", 0xffe70036, 8, GROUP(
- 0, 0, 0, 0,
- 0, 0, PM1_DATA, PM0_DATA ))
- },
- { PINMUX_DATA_REG("PNDR", 0xffe70038, 8, GROUP(
- PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
- PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA ))
- },
- { PINMUX_DATA_REG("PPDR", 0xffe7003a, 8, GROUP(
- 0, 0, PP5_DATA, PP4_DATA,
- PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA ))
- },
- { PINMUX_DATA_REG("PQDR", 0xffe7003c, 8, GROUP(
- 0, 0, 0, PQ4_DATA,
- PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA ))
- },
- { PINMUX_DATA_REG("PRDR", 0xffe7003e, 8, GROUP(
- 0, 0, 0, 0,
- PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7785_pinmux_info = {
- .name = "sh7785_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-sh7786.c b/drivers/pinctrl/renesas/pfc-sh7786.c
deleted file mode 100644
index f09f4a76901088..00000000000000
--- a/drivers/pinctrl/renesas/pfc-sh7786.c
+++ /dev/null
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7786 Pinmux
- *
- * Copyright (C) 2008, 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785 pinmux
- *
- * Copyright (C) 2008 Magnus Damm
- */
-
-#include <linux/kernel.h>
-#include <cpu/sh7786.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA,
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN,
- PH7_IN, PH6_IN, PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
- PJ3_IN, PJ2_IN, PJ1_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT,
- PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
- PJ3_OUT, PJ2_OUT, PJ1_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN,
- PH7_FN, PH6_FN, PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
- PJ3_FN, PJ2_FN, PJ1_FN,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1,
-
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
- DCLKIN_MARK, DCLKOUT_MARK, ODDF_MARK,
- VSYNC_MARK, HSYNC_MARK, CDE_MARK, DISP_MARK,
- DR0_MARK, DR1_MARK, DR2_MARK, DR3_MARK, DR4_MARK, DR5_MARK,
- DG0_MARK, DG1_MARK, DG2_MARK, DG3_MARK, DG4_MARK, DG5_MARK,
- DB0_MARK, DB1_MARK, DB2_MARK, DB3_MARK, DB4_MARK, DB5_MARK,
- ETH_MAGIC_MARK, ETH_LINK_MARK, ETH_TX_ER_MARK, ETH_TX_EN_MARK,
- ETH_MDIO_MARK, ETH_RX_CLK_MARK, ETH_MDC_MARK, ETH_COL_MARK,
- ETH_TX_CLK_MARK, ETH_CRS_MARK, ETH_RX_DV_MARK, ETH_RX_ER_MARK,
- ETH_TXD3_MARK, ETH_TXD2_MARK, ETH_TXD1_MARK, ETH_TXD0_MARK,
- ETH_RXD3_MARK, ETH_RXD2_MARK, ETH_RXD1_MARK, ETH_RXD0_MARK,
- HSPI_CLK_MARK, HSPI_CS_MARK, HSPI_RX_MARK, HSPI_TX_MARK,
- SCIF0_CTS_MARK, SCIF0_RTS_MARK,
- SCIF0_SCK_MARK, SCIF0_RXD_MARK, SCIF0_TXD_MARK,
- SCIF1_SCK_MARK, SCIF1_RXD_MARK, SCIF1_TXD_MARK,
- SCIF3_SCK_MARK, SCIF3_RXD_MARK, SCIF3_TXD_MARK,
- SCIF4_SCK_MARK, SCIF4_RXD_MARK, SCIF4_TXD_MARK,
- SCIF5_SCK_MARK, SCIF5_RXD_MARK, SCIF5_TXD_MARK,
- BREQ_MARK, IOIS16_MARK, CE2B_MARK, CE2A_MARK, BACK_MARK,
- FALE_MARK, FRB_MARK, FSTATUS_MARK,
- FSE_MARK, FCLE_MARK,
- DACK0_MARK, DACK1_MARK, DACK2_MARK, DACK3_MARK,
- DREQ0_MARK, DREQ1_MARK, DREQ2_MARK, DREQ3_MARK,
- DRAK0_MARK, DRAK1_MARK, DRAK2_MARK, DRAK3_MARK,
- USB_OVC1_MARK, USB_OVC0_MARK,
- USB_PENC1_MARK, USB_PENC0_MARK,
- HAC_RES_MARK,
- HAC1_SDOUT_MARK, HAC1_SDIN_MARK, HAC1_SYNC_MARK, HAC1_BITCLK_MARK,
- HAC0_SDOUT_MARK, HAC0_SDIN_MARK, HAC0_SYNC_MARK, HAC0_BITCLK_MARK,
- SSI0_SDATA_MARK, SSI0_SCK_MARK, SSI0_WS_MARK, SSI0_CLK_MARK,
- SSI1_SDATA_MARK, SSI1_SCK_MARK, SSI1_WS_MARK, SSI1_CLK_MARK,
- SSI2_SDATA_MARK, SSI2_SCK_MARK, SSI2_WS_MARK,
- SSI3_SDATA_MARK, SSI3_SCK_MARK, SSI3_WS_MARK,
- SDIF1CMD_MARK, SDIF1CD_MARK, SDIF1WP_MARK, SDIF1CLK_MARK,
- SDIF1D3_MARK, SDIF1D2_MARK, SDIF1D1_MARK, SDIF1D0_MARK,
- SDIF0CMD_MARK, SDIF0CD_MARK, SDIF0WP_MARK, SDIF0CLK_MARK,
- SDIF0D3_MARK, SDIF0D2_MARK, SDIF0D1_MARK, SDIF0D0_MARK,
- TCLK_MARK,
- IRL7_MARK, IRL6_MARK, IRL5_MARK, IRL4_MARK,
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT),
- PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT),
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PJ GPIO */
- PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT),
- PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT),
- PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT),
- PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT),
- PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT),
- PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT),
- PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT),
-
- /* PA FN */
- PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN),
- PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN),
- PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN),
- PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN),
- PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN),
- PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN),
- PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN),
- PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN),
- PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN),
- PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN),
- PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN),
- PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN),
- PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN),
- PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN),
- PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN),
- PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN),
- PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN),
- PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN),
- PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN),
- PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN),
- PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN),
- PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN),
- PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN),
- PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN),
- PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN),
- PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN),
- PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN),
- PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN),
- PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN),
- PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN),
- PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN),
- PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN),
- PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN),
- PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN),
- PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN),
- PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN),
- PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN),
- PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN),
-
- PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN),
- PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN),
- PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN),
- PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN),
- PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN),
- PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN),
- PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN),
- PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DCLKOUT_MARK, PD7_FN),
- PINMUX_DATA(SCIF1_SCK_MARK, PD6_FN),
- PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN),
- PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN),
- PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN),
- PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN),
- PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN),
- PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN),
- PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN),
- PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(USB_PENC1_MARK, PE7_FN),
- PINMUX_DATA(USB_PENC0_MARK, PE6_FN),
-
- /* PF FN */
- PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN),
- PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN),
- PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN),
- PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN),
- PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN),
- PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN),
- PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN),
- PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN),
- PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN),
- PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN),
- PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN),
- PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN),
- PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN),
- PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN),
- PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN),
- PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN),
- PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN),
- PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN),
- PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN),
- PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN),
- PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN),
- PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN),
-
- /* PH FN */
- PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN),
- PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN),
- PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN),
- PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN),
- PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN),
- PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN),
- PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN),
- PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN),
- PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN),
- PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN),
- PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN),
- PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN),
- PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN),
- PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN),
- PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN),
- PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN),
-
- /* PJ FN */
- PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN),
- PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN),
- PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN),
- PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN),
- PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN),
- PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN),
- PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN),
- PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN),
- PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN),
- PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN),
- PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN),
- PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN),
- PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN),
- PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN),
- PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
-
- /* PH */
- PINMUX_GPIO(PH7),
- PINMUX_GPIO(PH6),
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-
- /* PJ */
- PINMUX_GPIO(PJ7),
- PINMUX_GPIO(PJ6),
- PINMUX_GPIO(PJ5),
- PINMUX_GPIO(PJ4),
- PINMUX_GPIO(PJ3),
- PINMUX_GPIO(PJ2),
- PINMUX_GPIO(PJ1),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(CDE),
- GPIO_FN(ETH_MAGIC),
- GPIO_FN(DISP),
- GPIO_FN(ETH_LINK),
- GPIO_FN(DR5),
- GPIO_FN(ETH_TX_ER),
- GPIO_FN(DR4),
- GPIO_FN(ETH_TX_EN),
- GPIO_FN(DR3),
- GPIO_FN(ETH_TXD3),
- GPIO_FN(DR2),
- GPIO_FN(ETH_TXD2),
- GPIO_FN(DR1),
- GPIO_FN(ETH_TXD1),
- GPIO_FN(DR0),
- GPIO_FN(ETH_TXD0),
- GPIO_FN(VSYNC),
- GPIO_FN(HSPI_CLK),
- GPIO_FN(ODDF),
- GPIO_FN(HSPI_CS),
- GPIO_FN(DG5),
- GPIO_FN(ETH_MDIO),
- GPIO_FN(DG4),
- GPIO_FN(ETH_RX_CLK),
- GPIO_FN(DG3),
- GPIO_FN(ETH_MDC),
- GPIO_FN(DG2),
- GPIO_FN(ETH_COL),
- GPIO_FN(DG1),
- GPIO_FN(ETH_TX_CLK),
- GPIO_FN(DG0),
- GPIO_FN(ETH_CRS),
- GPIO_FN(DCLKIN),
- GPIO_FN(HSPI_RX),
- GPIO_FN(HSYNC),
- GPIO_FN(HSPI_TX),
- GPIO_FN(DB5),
- GPIO_FN(ETH_RXD3),
- GPIO_FN(DB4),
- GPIO_FN(ETH_RXD2),
- GPIO_FN(DB3),
- GPIO_FN(ETH_RXD1),
- GPIO_FN(DB2),
- GPIO_FN(ETH_RXD0),
- GPIO_FN(DB1),
- GPIO_FN(ETH_RX_DV),
- GPIO_FN(DB0),
- GPIO_FN(ETH_RX_ER),
- GPIO_FN(DCLKOUT),
- GPIO_FN(SCIF1_SCK),
- GPIO_FN(SCIF1_RXD),
- GPIO_FN(SCIF1_TXD),
- GPIO_FN(DACK1),
- GPIO_FN(BACK),
- GPIO_FN(FALE),
- GPIO_FN(DACK0),
- GPIO_FN(FCLE),
- GPIO_FN(DREQ1),
- GPIO_FN(BREQ),
- GPIO_FN(USB_OVC1),
- GPIO_FN(DREQ0),
- GPIO_FN(USB_OVC0),
- GPIO_FN(USB_PENC1),
- GPIO_FN(USB_PENC0),
- GPIO_FN(HAC1_SDOUT),
- GPIO_FN(SSI1_SDATA),
- GPIO_FN(SDIF1CMD),
- GPIO_FN(HAC1_SDIN),
- GPIO_FN(SSI1_SCK),
- GPIO_FN(SDIF1CD),
- GPIO_FN(HAC1_SYNC),
- GPIO_FN(SSI1_WS),
- GPIO_FN(SDIF1WP),
- GPIO_FN(HAC1_BITCLK),
- GPIO_FN(SSI1_CLK),
- GPIO_FN(SDIF1CLK),
- GPIO_FN(HAC0_SDOUT),
- GPIO_FN(SSI0_SDATA),
- GPIO_FN(SDIF1D3),
- GPIO_FN(HAC0_SDIN),
- GPIO_FN(SSI0_SCK),
- GPIO_FN(SDIF1D2),
- GPIO_FN(HAC0_SYNC),
- GPIO_FN(SSI0_WS),
- GPIO_FN(SDIF1D1),
- GPIO_FN(HAC0_BITCLK),
- GPIO_FN(SSI0_CLK),
- GPIO_FN(SDIF1D0),
- GPIO_FN(SCIF3_SCK),
- GPIO_FN(SSI2_SDATA),
- GPIO_FN(SCIF3_RXD),
- GPIO_FN(TCLK),
- GPIO_FN(SSI2_SCK),
- GPIO_FN(SCIF3_TXD),
- GPIO_FN(HAC_RES),
- GPIO_FN(SSI2_WS),
- GPIO_FN(DACK3),
- GPIO_FN(SDIF0CMD),
- GPIO_FN(DACK2),
- GPIO_FN(SDIF0CD),
- GPIO_FN(DREQ3),
- GPIO_FN(SDIF0WP),
- GPIO_FN(SCIF0_CTS),
- GPIO_FN(DREQ2),
- GPIO_FN(SDIF0CLK),
- GPIO_FN(SCIF0_RTS),
- GPIO_FN(IRL7),
- GPIO_FN(SDIF0D3),
- GPIO_FN(SCIF0_SCK),
- GPIO_FN(IRL6),
- GPIO_FN(SDIF0D2),
- GPIO_FN(SCIF0_RXD),
- GPIO_FN(IRL5),
- GPIO_FN(SDIF0D1),
- GPIO_FN(SCIF0_TXD),
- GPIO_FN(IRL4),
- GPIO_FN(SDIF0D0),
- GPIO_FN(SCIF5_SCK),
- GPIO_FN(FRB),
- GPIO_FN(SCIF5_RXD),
- GPIO_FN(IOIS16),
- GPIO_FN(SCIF5_TXD),
- GPIO_FN(CE2B),
- GPIO_FN(DRAK3),
- GPIO_FN(CE2A),
- GPIO_FN(SCIF4_SCK),
- GPIO_FN(DRAK2),
- GPIO_FN(SSI3_WS),
- GPIO_FN(SCIF4_RXD),
- GPIO_FN(DRAK1),
- GPIO_FN(SSI3_SDATA),
- GPIO_FN(FSTATUS),
- GPIO_FN(SCIF4_TXD),
- GPIO_FN(DRAK0),
- GPIO_FN(SSI3_SCK),
- GPIO_FN(FSE),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2, GROUP(
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2, GROUP(
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PECR", 0xffcc0008, 16,
- GROUP(2, 2, -12),
- GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- /* RESERVED [12] */ ))
- },
- { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2, GROUP(
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0 ))
- },
- { PINMUX_CFG_REG_VAR("PGCR", 0xffcc000c, 16,
- GROUP(2, 2, 2, -10),
- GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- /* RESERVED [10] */ ))
- },
- { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2, GROUP(
- PH7_FN, PH7_OUT, PH7_IN, 0,
- PH6_FN, PH6_OUT, PH6_IN, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0 ))
- },
- { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2, GROUP(
- PJ7_FN, PJ7_OUT, PJ7_IN, 0,
- PJ6_FN, PJ6_OUT, PJ6_IN, 0,
- PJ5_FN, PJ5_OUT, PJ5_IN, 0,
- PJ4_FN, PJ4_OUT, PJ4_IN, 0,
- PJ3_FN, PJ3_OUT, PJ3_IN, 0,
- PJ2_FN, PJ2_OUT, PJ2_IN, 0,
- PJ1_FN, PJ1_OUT, PJ1_IN, 0,
- 0, 0, 0, 0, ))
- },
- { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1, GROUP(
- 0, 0,
- P1MSEL14_0, P1MSEL14_1,
- P1MSEL13_0, P1MSEL13_1,
- P1MSEL12_0, P1MSEL12_1,
- P1MSEL11_0, P1MSEL11_1,
- P1MSEL10_0, P1MSEL10_1,
- P1MSEL9_0, P1MSEL9_1,
- P1MSEL8_0, P1MSEL8_1,
- P1MSEL7_0, P1MSEL7_1,
- P1MSEL6_0, P1MSEL6_1,
- P1MSEL5_0, P1MSEL5_1,
- P1MSEL4_0, P1MSEL4_1,
- P1MSEL3_0, P1MSEL3_1,
- P1MSEL2_0, P1MSEL2_1,
- P1MSEL1_0, P1MSEL1_1,
- P1MSEL0_0, P1MSEL0_1 ))
- },
- { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1, GROUP(
- P2MSEL15_0, P2MSEL15_1,
- P2MSEL14_0, P2MSEL14_1,
- P2MSEL13_0, P2MSEL13_1,
- P2MSEL12_0, P2MSEL12_1,
- P2MSEL11_0, P2MSEL11_1,
- P2MSEL10_0, P2MSEL10_1,
- P2MSEL9_0, P2MSEL9_1,
- P2MSEL8_0, P2MSEL8_1,
- P2MSEL7_0, P2MSEL7_1,
- P2MSEL6_0, P2MSEL6_1,
- P2MSEL5_0, P2MSEL5_1,
- P2MSEL4_0, P2MSEL4_1,
- P2MSEL3_0, P2MSEL3_1,
- P2MSEL2_0, P2MSEL2_1,
- P2MSEL1_0, P2MSEL1_1,
- P2MSEL0_0, P2MSEL0_1 ))
- },
- {}
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PADR", 0xffcc0020, 8, GROUP(
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA ))
- },
- { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8, GROUP(
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA ))
- },
- { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8, GROUP(
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA ))
- },
- { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8, GROUP(
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA ))
- },
- { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8, GROUP(
- PE7_DATA, PE6_DATA,
- 0, 0, 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8, GROUP(
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA ))
- },
- { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8, GROUP(
- PG7_DATA, PG6_DATA, PG5_DATA, 0,
- 0, 0, 0, 0 ))
- },
- { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8, GROUP(
- PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA ))
- },
- { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8, GROUP(
- PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
- PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info sh7786_pinmux_info = {
- .name = "sh7786_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
-
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
-};
diff --git a/drivers/pinctrl/renesas/pfc-shx3.c b/drivers/pinctrl/renesas/pfc-shx3.c
deleted file mode 100644
index 96a65d83774f16..00000000000000
--- a/drivers/pinctrl/renesas/pfc-shx3.c
+++ /dev/null
@@ -1,557 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH-X3 prototype CPU pinmux
- *
- * Copyright (C) 2010 Paul Mundt
- */
-#include <linux/kernel.h>
-#include <cpu/shx3.h>
-
-#include "sh_pfc.h"
-
-enum {
- PINMUX_RESERVED = 0,
-
- PINMUX_DATA_BEGIN,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
-
- PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
- PINMUX_DATA_END,
-
- PINMUX_INPUT_BEGIN,
- PA7_IN, PA6_IN, PA5_IN, PA4_IN,
- PA3_IN, PA2_IN, PA1_IN, PA0_IN,
- PB7_IN, PB6_IN, PB5_IN, PB4_IN,
- PB3_IN, PB2_IN, PB1_IN, PB0_IN,
- PC7_IN, PC6_IN, PC5_IN, PC4_IN,
- PC3_IN, PC2_IN, PC1_IN, PC0_IN,
- PD7_IN, PD6_IN, PD5_IN, PD4_IN,
- PD3_IN, PD2_IN, PD1_IN, PD0_IN,
- PE7_IN, PE6_IN, PE5_IN, PE4_IN,
- PE3_IN, PE2_IN, PE1_IN, PE0_IN,
- PF7_IN, PF6_IN, PF5_IN, PF4_IN,
- PF3_IN, PF2_IN, PF1_IN, PF0_IN,
- PG7_IN, PG6_IN, PG5_IN, PG4_IN,
- PG3_IN, PG2_IN, PG1_IN, PG0_IN,
-
- PH5_IN, PH4_IN,
- PH3_IN, PH2_IN, PH1_IN, PH0_IN,
- PINMUX_INPUT_END,
-
- PINMUX_OUTPUT_BEGIN,
- PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
- PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
- PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
- PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
- PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
- PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
- PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
- PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
- PE7_OUT, PE6_OUT, PE5_OUT, PE4_OUT,
- PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
- PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
- PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
- PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
- PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
-
- PH5_OUT, PH4_OUT,
- PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
- PINMUX_OUTPUT_END,
-
- PINMUX_FUNCTION_BEGIN,
- PA7_FN, PA6_FN, PA5_FN, PA4_FN,
- PA3_FN, PA2_FN, PA1_FN, PA0_FN,
- PB7_FN, PB6_FN, PB5_FN, PB4_FN,
- PB3_FN, PB2_FN, PB1_FN, PB0_FN,
- PC7_FN, PC6_FN, PC5_FN, PC4_FN,
- PC3_FN, PC2_FN, PC1_FN, PC0_FN,
- PD7_FN, PD6_FN, PD5_FN, PD4_FN,
- PD3_FN, PD2_FN, PD1_FN, PD0_FN,
- PE7_FN, PE6_FN, PE5_FN, PE4_FN,
- PE3_FN, PE2_FN, PE1_FN, PE0_FN,
- PF7_FN, PF6_FN, PF5_FN, PF4_FN,
- PF3_FN, PF2_FN, PF1_FN, PF0_FN,
- PG7_FN, PG6_FN, PG5_FN, PG4_FN,
- PG3_FN, PG2_FN, PG1_FN, PG0_FN,
-
- PH5_FN, PH4_FN,
- PH3_FN, PH2_FN, PH1_FN, PH0_FN,
- PINMUX_FUNCTION_END,
-
- PINMUX_MARK_BEGIN,
-
- D31_MARK, D30_MARK, D29_MARK, D28_MARK, D27_MARK, D26_MARK,
- D25_MARK, D24_MARK, D23_MARK, D22_MARK, D21_MARK, D20_MARK,
- D19_MARK, D18_MARK, D17_MARK, D16_MARK,
-
- BACK_MARK, BREQ_MARK,
- WE3_MARK, WE2_MARK,
- CS6_MARK, CS5_MARK, CS4_MARK,
- CLKOUTENB_MARK,
-
- DACK3_MARK, DACK2_MARK, DACK1_MARK, DACK0_MARK,
- DREQ3_MARK, DREQ2_MARK, DREQ1_MARK, DREQ0_MARK,
-
- IRQ3_MARK, IRQ2_MARK, IRQ1_MARK, IRQ0_MARK,
-
- DRAK3_MARK, DRAK2_MARK, DRAK1_MARK, DRAK0_MARK,
-
- SCK3_MARK, SCK2_MARK, SCK1_MARK, SCK0_MARK,
- IRL3_MARK, IRL2_MARK, IRL1_MARK, IRL0_MARK,
- TXD3_MARK, TXD2_MARK, TXD1_MARK, TXD0_MARK,
- RXD3_MARK, RXD2_MARK, RXD1_MARK, RXD0_MARK,
-
- CE2B_MARK, CE2A_MARK, IOIS16_MARK,
- STATUS1_MARK, STATUS0_MARK,
-
- IRQOUT_MARK,
-
- PINMUX_MARK_END,
-};
-
-static const u16 pinmux_data[] = {
- /* PA GPIO */
- PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT),
- PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT),
- PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT),
- PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT),
- PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT),
- PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT),
- PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT),
- PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT),
-
- /* PB GPIO */
- PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT),
- PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT),
- PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT),
- PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT),
- PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT),
- PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT),
- PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT),
- PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT),
-
- /* PC GPIO */
- PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT),
- PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT),
- PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT),
- PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT),
- PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT),
- PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT),
- PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT),
- PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT),
-
- /* PD GPIO */
- PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT),
- PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT),
- PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT),
- PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT),
- PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT),
- PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT),
- PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT),
- PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT),
-
- /* PE GPIO */
- PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT),
- PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT),
- PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT),
- PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT),
- PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT),
- PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT),
- PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT),
- PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT),
-
- /* PF GPIO */
- PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT),
- PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT),
- PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT),
- PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT),
- PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT),
- PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT),
- PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT),
- PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT),
-
- /* PG GPIO */
- PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT),
- PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT),
- PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT),
- PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT),
- PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT),
- PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT),
- PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT),
- PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT),
-
- /* PH GPIO */
- PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT),
- PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT),
- PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT),
- PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT),
- PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT),
- PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT),
-
- /* PA FN */
- PINMUX_DATA(D31_MARK, PA7_FN),
- PINMUX_DATA(D30_MARK, PA6_FN),
- PINMUX_DATA(D29_MARK, PA5_FN),
- PINMUX_DATA(D28_MARK, PA4_FN),
- PINMUX_DATA(D27_MARK, PA3_FN),
- PINMUX_DATA(D26_MARK, PA2_FN),
- PINMUX_DATA(D25_MARK, PA1_FN),
- PINMUX_DATA(D24_MARK, PA0_FN),
-
- /* PB FN */
- PINMUX_DATA(D23_MARK, PB7_FN),
- PINMUX_DATA(D22_MARK, PB6_FN),
- PINMUX_DATA(D21_MARK, PB5_FN),
- PINMUX_DATA(D20_MARK, PB4_FN),
- PINMUX_DATA(D19_MARK, PB3_FN),
- PINMUX_DATA(D18_MARK, PB2_FN),
- PINMUX_DATA(D17_MARK, PB1_FN),
- PINMUX_DATA(D16_MARK, PB0_FN),
-
- /* PC FN */
- PINMUX_DATA(BACK_MARK, PC7_FN),
- PINMUX_DATA(BREQ_MARK, PC6_FN),
- PINMUX_DATA(WE3_MARK, PC5_FN),
- PINMUX_DATA(WE2_MARK, PC4_FN),
- PINMUX_DATA(CS6_MARK, PC3_FN),
- PINMUX_DATA(CS5_MARK, PC2_FN),
- PINMUX_DATA(CS4_MARK, PC1_FN),
- PINMUX_DATA(CLKOUTENB_MARK, PC0_FN),
-
- /* PD FN */
- PINMUX_DATA(DACK3_MARK, PD7_FN),
- PINMUX_DATA(DACK2_MARK, PD6_FN),
- PINMUX_DATA(DACK1_MARK, PD5_FN),
- PINMUX_DATA(DACK0_MARK, PD4_FN),
- PINMUX_DATA(DREQ3_MARK, PD3_FN),
- PINMUX_DATA(DREQ2_MARK, PD2_FN),
- PINMUX_DATA(DREQ1_MARK, PD1_FN),
- PINMUX_DATA(DREQ0_MARK, PD0_FN),
-
- /* PE FN */
- PINMUX_DATA(IRQ3_MARK, PE7_FN),
- PINMUX_DATA(IRQ2_MARK, PE6_FN),
- PINMUX_DATA(IRQ1_MARK, PE5_FN),
- PINMUX_DATA(IRQ0_MARK, PE4_FN),
- PINMUX_DATA(DRAK3_MARK, PE3_FN),
- PINMUX_DATA(DRAK2_MARK, PE2_FN),
- PINMUX_DATA(DRAK1_MARK, PE1_FN),
- PINMUX_DATA(DRAK0_MARK, PE0_FN),
-
- /* PF FN */
- PINMUX_DATA(SCK3_MARK, PF7_FN),
- PINMUX_DATA(SCK2_MARK, PF6_FN),
- PINMUX_DATA(SCK1_MARK, PF5_FN),
- PINMUX_DATA(SCK0_MARK, PF4_FN),
- PINMUX_DATA(IRL3_MARK, PF3_FN),
- PINMUX_DATA(IRL2_MARK, PF2_FN),
- PINMUX_DATA(IRL1_MARK, PF1_FN),
- PINMUX_DATA(IRL0_MARK, PF0_FN),
-
- /* PG FN */
- PINMUX_DATA(TXD3_MARK, PG7_FN),
- PINMUX_DATA(TXD2_MARK, PG6_FN),
- PINMUX_DATA(TXD1_MARK, PG5_FN),
- PINMUX_DATA(TXD0_MARK, PG4_FN),
- PINMUX_DATA(RXD3_MARK, PG3_FN),
- PINMUX_DATA(RXD2_MARK, PG2_FN),
- PINMUX_DATA(RXD1_MARK, PG1_FN),
- PINMUX_DATA(RXD0_MARK, PG0_FN),
-
- /* PH FN */
- PINMUX_DATA(CE2B_MARK, PH5_FN),
- PINMUX_DATA(CE2A_MARK, PH4_FN),
- PINMUX_DATA(IOIS16_MARK, PH3_FN),
- PINMUX_DATA(STATUS1_MARK, PH2_FN),
- PINMUX_DATA(STATUS0_MARK, PH1_FN),
- PINMUX_DATA(IRQOUT_MARK, PH0_FN),
-};
-
-static const struct sh_pfc_pin pinmux_pins[] = {
- /* PA */
- PINMUX_GPIO(PA7),
- PINMUX_GPIO(PA6),
- PINMUX_GPIO(PA5),
- PINMUX_GPIO(PA4),
- PINMUX_GPIO(PA3),
- PINMUX_GPIO(PA2),
- PINMUX_GPIO(PA1),
- PINMUX_GPIO(PA0),
-
- /* PB */
- PINMUX_GPIO(PB7),
- PINMUX_GPIO(PB6),
- PINMUX_GPIO(PB5),
- PINMUX_GPIO(PB4),
- PINMUX_GPIO(PB3),
- PINMUX_GPIO(PB2),
- PINMUX_GPIO(PB1),
- PINMUX_GPIO(PB0),
-
- /* PC */
- PINMUX_GPIO(PC7),
- PINMUX_GPIO(PC6),
- PINMUX_GPIO(PC5),
- PINMUX_GPIO(PC4),
- PINMUX_GPIO(PC3),
- PINMUX_GPIO(PC2),
- PINMUX_GPIO(PC1),
- PINMUX_GPIO(PC0),
-
- /* PD */
- PINMUX_GPIO(PD7),
- PINMUX_GPIO(PD6),
- PINMUX_GPIO(PD5),
- PINMUX_GPIO(PD4),
- PINMUX_GPIO(PD3),
- PINMUX_GPIO(PD2),
- PINMUX_GPIO(PD1),
- PINMUX_GPIO(PD0),
-
- /* PE */
- PINMUX_GPIO(PE7),
- PINMUX_GPIO(PE6),
- PINMUX_GPIO(PE5),
- PINMUX_GPIO(PE4),
- PINMUX_GPIO(PE3),
- PINMUX_GPIO(PE2),
- PINMUX_GPIO(PE1),
- PINMUX_GPIO(PE0),
-
- /* PF */
- PINMUX_GPIO(PF7),
- PINMUX_GPIO(PF6),
- PINMUX_GPIO(PF5),
- PINMUX_GPIO(PF4),
- PINMUX_GPIO(PF3),
- PINMUX_GPIO(PF2),
- PINMUX_GPIO(PF1),
- PINMUX_GPIO(PF0),
-
- /* PG */
- PINMUX_GPIO(PG7),
- PINMUX_GPIO(PG6),
- PINMUX_GPIO(PG5),
- PINMUX_GPIO(PG4),
- PINMUX_GPIO(PG3),
- PINMUX_GPIO(PG2),
- PINMUX_GPIO(PG1),
- PINMUX_GPIO(PG0),
-
- /* PH */
- PINMUX_GPIO(PH5),
- PINMUX_GPIO(PH4),
- PINMUX_GPIO(PH3),
- PINMUX_GPIO(PH2),
- PINMUX_GPIO(PH1),
- PINMUX_GPIO(PH0),
-};
-
-#define PINMUX_FN_BASE ARRAY_SIZE(pinmux_pins)
-
-static const struct pinmux_func pinmux_func_gpios[] = {
- /* FN */
- GPIO_FN(D31),
- GPIO_FN(D30),
- GPIO_FN(D29),
- GPIO_FN(D28),
- GPIO_FN(D27),
- GPIO_FN(D26),
- GPIO_FN(D25),
- GPIO_FN(D24),
- GPIO_FN(D23),
- GPIO_FN(D22),
- GPIO_FN(D21),
- GPIO_FN(D20),
- GPIO_FN(D19),
- GPIO_FN(D18),
- GPIO_FN(D17),
- GPIO_FN(D16),
- GPIO_FN(BACK),
- GPIO_FN(BREQ),
- GPIO_FN(WE3),
- GPIO_FN(WE2),
- GPIO_FN(CS6),
- GPIO_FN(CS5),
- GPIO_FN(CS4),
- GPIO_FN(CLKOUTENB),
- GPIO_FN(DACK3),
- GPIO_FN(DACK2),
- GPIO_FN(DACK1),
- GPIO_FN(DACK0),
- GPIO_FN(DREQ3),
- GPIO_FN(DREQ2),
- GPIO_FN(DREQ1),
- GPIO_FN(DREQ0),
- GPIO_FN(IRQ3),
- GPIO_FN(IRQ2),
- GPIO_FN(IRQ1),
- GPIO_FN(IRQ0),
- GPIO_FN(DRAK3),
- GPIO_FN(DRAK2),
- GPIO_FN(DRAK1),
- GPIO_FN(DRAK0),
- GPIO_FN(SCK3),
- GPIO_FN(SCK2),
- GPIO_FN(SCK1),
- GPIO_FN(SCK0),
- GPIO_FN(IRL3),
- GPIO_FN(IRL2),
- GPIO_FN(IRL1),
- GPIO_FN(IRL0),
- GPIO_FN(TXD3),
- GPIO_FN(TXD2),
- GPIO_FN(TXD1),
- GPIO_FN(TXD0),
- GPIO_FN(RXD3),
- GPIO_FN(RXD2),
- GPIO_FN(RXD1),
- GPIO_FN(RXD0),
- GPIO_FN(CE2B),
- GPIO_FN(CE2A),
- GPIO_FN(IOIS16),
- GPIO_FN(STATUS1),
- GPIO_FN(STATUS0),
- GPIO_FN(IRQOUT),
-};
-
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
- { PINMUX_CFG_REG("PABCR", 0xffc70000, 32, 2, GROUP(
- PA7_FN, PA7_OUT, PA7_IN, 0,
- PA6_FN, PA6_OUT, PA6_IN, 0,
- PA5_FN, PA5_OUT, PA5_IN, 0,
- PA4_FN, PA4_OUT, PA4_IN, 0,
- PA3_FN, PA3_OUT, PA3_IN, 0,
- PA2_FN, PA2_OUT, PA2_IN, 0,
- PA1_FN, PA1_OUT, PA1_IN, 0,
- PA0_FN, PA0_OUT, PA0_IN, 0,
- PB7_FN, PB7_OUT, PB7_IN, 0,
- PB6_FN, PB6_OUT, PB6_IN, 0,
- PB5_FN, PB5_OUT, PB5_IN, 0,
- PB4_FN, PB4_OUT, PB4_IN, 0,
- PB3_FN, PB3_OUT, PB3_IN, 0,
- PB2_FN, PB2_OUT, PB2_IN, 0,
- PB1_FN, PB1_OUT, PB1_IN, 0,
- PB0_FN, PB0_OUT, PB0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PCDCR", 0xffc70004, 32, 2, GROUP(
- PC7_FN, PC7_OUT, PC7_IN, 0,
- PC6_FN, PC6_OUT, PC6_IN, 0,
- PC5_FN, PC5_OUT, PC5_IN, 0,
- PC4_FN, PC4_OUT, PC4_IN, 0,
- PC3_FN, PC3_OUT, PC3_IN, 0,
- PC2_FN, PC2_OUT, PC2_IN, 0,
- PC1_FN, PC1_OUT, PC1_IN, 0,
- PC0_FN, PC0_OUT, PC0_IN, 0,
- PD7_FN, PD7_OUT, PD7_IN, 0,
- PD6_FN, PD6_OUT, PD6_IN, 0,
- PD5_FN, PD5_OUT, PD5_IN, 0,
- PD4_FN, PD4_OUT, PD4_IN, 0,
- PD3_FN, PD3_OUT, PD3_IN, 0,
- PD2_FN, PD2_OUT, PD2_IN, 0,
- PD1_FN, PD1_OUT, PD1_IN, 0,
- PD0_FN, PD0_OUT, PD0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PEFCR", 0xffc70008, 32, 2, GROUP(
- PE7_FN, PE7_OUT, PE7_IN, 0,
- PE6_FN, PE6_OUT, PE6_IN, 0,
- PE5_FN, PE5_OUT, PE5_IN, 0,
- PE4_FN, PE4_OUT, PE4_IN, 0,
- PE3_FN, PE3_OUT, PE3_IN, 0,
- PE2_FN, PE2_OUT, PE2_IN, 0,
- PE1_FN, PE1_OUT, PE1_IN, 0,
- PE0_FN, PE0_OUT, PE0_IN, 0,
- PF7_FN, PF7_OUT, PF7_IN, 0,
- PF6_FN, PF6_OUT, PF6_IN, 0,
- PF5_FN, PF5_OUT, PF5_IN, 0,
- PF4_FN, PF4_OUT, PF4_IN, 0,
- PF3_FN, PF3_OUT, PF3_IN, 0,
- PF2_FN, PF2_OUT, PF2_IN, 0,
- PF1_FN, PF1_OUT, PF1_IN, 0,
- PF0_FN, PF0_OUT, PF0_IN, 0, ))
- },
- { PINMUX_CFG_REG("PGHCR", 0xffc7000c, 32, 2, GROUP(
- PG7_FN, PG7_OUT, PG7_IN, 0,
- PG6_FN, PG6_OUT, PG6_IN, 0,
- PG5_FN, PG5_OUT, PG5_IN, 0,
- PG4_FN, PG4_OUT, PG4_IN, 0,
- PG3_FN, PG3_OUT, PG3_IN, 0,
- PG2_FN, PG2_OUT, PG2_IN, 0,
- PG1_FN, PG1_OUT, PG1_IN, 0,
- PG0_FN, PG0_OUT, PG0_IN, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- PH5_FN, PH5_OUT, PH5_IN, 0,
- PH4_FN, PH4_OUT, PH4_IN, 0,
- PH3_FN, PH3_OUT, PH3_IN, 0,
- PH2_FN, PH2_OUT, PH2_IN, 0,
- PH1_FN, PH1_OUT, PH1_IN, 0,
- PH0_FN, PH0_OUT, PH0_IN, 0, ))
- },
- { },
-};
-
-static const struct pinmux_data_reg pinmux_data_regs[] = {
- { PINMUX_DATA_REG("PABDR", 0xffc70010, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
- PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
- PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, ))
- },
- { PINMUX_DATA_REG("PCDDR", 0xffc70014, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
- PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
- PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, ))
- },
- { PINMUX_DATA_REG("PEFDR", 0xffc70018, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
- PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
- PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, ))
- },
- { PINMUX_DATA_REG("PGHDR", 0xffc7001c, 32, GROUP(
- 0, 0, 0, 0, 0, 0, 0, 0,
- PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
- PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, PH5_DATA, PH4_DATA,
- PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, ))
- },
- { },
-};
-
-const struct sh_pfc_soc_info shx3_pinmux_info = {
- .name = "shx3_pfc",
- .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
- .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
- .pins = pinmux_pins,
- .nr_pins = ARRAY_SIZE(pinmux_pins),
- .func_gpios = pinmux_func_gpios,
- .nr_func_gpios = ARRAY_SIZE(pinmux_func_gpios),
- .pinmux_data = pinmux_data,
- .pinmux_data_size = ARRAY_SIZE(pinmux_data),
- .cfg_regs = pinmux_config_regs,
- .data_regs = pinmux_data_regs,
-};
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 13/22] pinctrl: remove renesas sh controllers
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:45 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:45 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, 13 Jan 2023, Christoph Hellwig wrote:
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/pinctrl/renesas/Kconfig
> +++ b/drivers/pinctrl/renesas/Kconfig
> @@ -255,57 +243,10 @@ config PINCTRL_RZV2M
> This selects GPIO and pinctrl driver for Renesas RZ/V2M
> platforms.
>
> -config PINCTRL_PFC_SH7203
> - bool "pin control support for SH7203" if COMPILE_TEST
> - select PINCTRL_SH_FUNC_GPIO
(If this is to be continued) the PINCTRL_SH_FUNC_GPIO symbol itself, and
all its users, can be removed, too.
> --- a/drivers/pinctrl/renesas/core.c
> +++ b/drivers/pinctrl/renesas/core.c
> @@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
> #define DEV_PM_OPS NULL
> #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
>
> -#ifdef DEBUG
> -#define SH_PFC_MAX_REGS 300
> -#define SH_PFC_MAX_ENUMS 5000
> -
This whole hunk should stay (except for the part protected by #ifdef
CONFIG_PINCTRL_SH_FUNC_GPIO), as it is used for validating pin control
tables on ARM SoCs, too.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 13/22] pinctrl: remove renesas sh controllers
@ 2023-01-13 8:45 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:45 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, 13 Jan 2023, Christoph Hellwig wrote:
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/pinctrl/renesas/Kconfig
> +++ b/drivers/pinctrl/renesas/Kconfig
> @@ -255,57 +243,10 @@ config PINCTRL_RZV2M
> This selects GPIO and pinctrl driver for Renesas RZ/V2M
> platforms.
>
> -config PINCTRL_PFC_SH7203
> - bool "pin control support for SH7203" if COMPILE_TEST
> - select PINCTRL_SH_FUNC_GPIO
(If this is to be continued) the PINCTRL_SH_FUNC_GPIO symbol itself, and
all its users, can be removed, too.
> --- a/drivers/pinctrl/renesas/core.c
> +++ b/drivers/pinctrl/renesas/core.c
> @@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
> #define DEV_PM_OPS NULL
> #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
>
> -#ifdef DEBUG
> -#define SH_PFC_MAX_REGS 300
> -#define SH_PFC_MAX_ENUMS 5000
> -
This whole hunk should stay (except for the part protected by #ifdef
CONFIG_PINCTRL_SH_FUNC_GPIO), as it is used for validating pin control
tables on ARM SoCs, too.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 13/22] pinctrl: remove renesas sh controllers
@ 2023-01-13 8:45 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:45 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Christoph,
On Fri, 13 Jan 2023, Christoph Hellwig wrote:
> Now that arch/sh is removed these drivers are dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/pinctrl/renesas/Kconfig
> +++ b/drivers/pinctrl/renesas/Kconfig
> @@ -255,57 +243,10 @@ config PINCTRL_RZV2M
> This selects GPIO and pinctrl driver for Renesas RZ/V2M
> platforms.
>
> -config PINCTRL_PFC_SH7203
> - bool "pin control support for SH7203" if COMPILE_TEST
> - select PINCTRL_SH_FUNC_GPIO
(If this is to be continued) the PINCTRL_SH_FUNC_GPIO symbol itself, and
all its users, can be removed, too.
> --- a/drivers/pinctrl/renesas/core.c
> +++ b/drivers/pinctrl/renesas/core.c
> @@ -753,562 +753,6 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
> #define DEV_PM_OPS NULL
> #endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */
>
> -#ifdef DEBUG
> -#define SH_PFC_MAX_REGS 300
> -#define SH_PFC_MAX_ENUMS 5000
> -
This whole hunk should stay (except for the part protected by #ifdef
CONFIG_PINCTRL_SH_FUNC_GPIO), as it is used for validating pin control
tables on ARM SoCs, too.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 14/22] remove drivers/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/Makefile | 1 -
drivers/sh/Kconfig | 6 -
drivers/sh/Makefile | 12 -
drivers/sh/clk/Makefile | 4 -
drivers/sh/clk/core.c | 624 ----------------
drivers/sh/clk/cpg.c | 477 ------------
drivers/sh/intc/Kconfig | 44 --
drivers/sh/intc/Makefile | 6 -
drivers/sh/intc/access.c | 246 -------
drivers/sh/intc/balancing.c | 97 ---
drivers/sh/intc/chip.c | 211 ------
drivers/sh/intc/core.c | 501 -------------
drivers/sh/intc/handle.c | 306 --------
drivers/sh/intc/internals.h | 191 -----
drivers/sh/intc/irqdomain.c | 68 --
drivers/sh/intc/userimask.c | 84 ---
drivers/sh/intc/virq-debugfs.c | 54 --
drivers/sh/intc/virq.c | 269 -------
drivers/sh/maple/Makefile | 4 -
drivers/sh/maple/maple.c | 895 -----------------------
drivers/sh/pm_runtime.c | 40 -
drivers/sh/superhyway/Makefile | 8 -
drivers/sh/superhyway/superhyway-sysfs.c | 54 --
drivers/sh/superhyway/superhyway.c | 234 ------
include/linux/sh_clk.h | 213 ------
include/linux/superhyway.h | 107 ---
26 files changed, 4756 deletions(-)
delete mode 100644 drivers/sh/Kconfig
delete mode 100644 drivers/sh/Makefile
delete mode 100644 drivers/sh/clk/Makefile
delete mode 100644 drivers/sh/clk/core.c
delete mode 100644 drivers/sh/clk/cpg.c
delete mode 100644 drivers/sh/intc/Kconfig
delete mode 100644 drivers/sh/intc/Makefile
delete mode 100644 drivers/sh/intc/access.c
delete mode 100644 drivers/sh/intc/balancing.c
delete mode 100644 drivers/sh/intc/chip.c
delete mode 100644 drivers/sh/intc/core.c
delete mode 100644 drivers/sh/intc/handle.c
delete mode 100644 drivers/sh/intc/internals.h
delete mode 100644 drivers/sh/intc/irqdomain.c
delete mode 100644 drivers/sh/intc/userimask.c
delete mode 100644 drivers/sh/intc/virq-debugfs.c
delete mode 100644 drivers/sh/intc/virq.c
delete mode 100644 drivers/sh/maple/Makefile
delete mode 100644 drivers/sh/maple/maple.c
delete mode 100644 drivers/sh/pm_runtime.c
delete mode 100644 drivers/sh/superhyway/Makefile
delete mode 100644 drivers/sh/superhyway/superhyway-sysfs.c
delete mode 100644 drivers/sh/superhyway/superhyway.c
delete mode 100644 include/linux/sh_clk.h
delete mode 100644 include/linux/superhyway.h
diff --git a/drivers/Makefile b/drivers/Makefile
index bdf1c66141c9bd..b97a69a4c40b91 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,7 +134,6 @@ obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
-obj-$(CONFIG_SUPERH) += sh/
obj-y += clocksource/
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
diff --git a/drivers/sh/Kconfig b/drivers/sh/Kconfig
deleted file mode 100644
index 3588fcc9c0d23b..00000000000000
--- a/drivers/sh/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "SuperH / SH-Mobile Driver Options"
-
-source "drivers/sh/intc/Kconfig"
-
-endmenu
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
deleted file mode 100644
index c53262835e85e2..00000000000000
--- a/drivers/sh/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH specific drivers.
-#
-obj-$(CONFIG_SH_INTC) += intc/
-ifneq ($(CONFIG_COMMON_CLK),y)
-obj-$(CONFIG_HAVE_CLK) += clk/
-endif
-obj-$(CONFIG_MAPLE) += maple/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-
-obj-y += pm_runtime.o
diff --git a/drivers/sh/clk/Makefile b/drivers/sh/clk/Makefile
deleted file mode 100644
index 0158ff3ba9d544..00000000000000
--- a/drivers/sh/clk/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := core.o
-
-obj-$(CONFIG_SH_CLK_CPG) += cpg.o
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
deleted file mode 100644
index d996782a710642..00000000000000
--- a/drivers/sh/clk/core.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * SuperH clock framework
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "clock: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/syscore_ops.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* clock disable operations are not passed on to hardware during boot */
-static int allow_disable;
-
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap)
-{
- unsigned long mult, div;
- unsigned long freq;
- int i;
-
- clk->nr_freqs = nr_freqs;
-
- for (i = 0; i < nr_freqs; i++) {
- div = 1;
- mult = 1;
-
- if (src_table->divisors && i < src_table->nr_divisors)
- div = src_table->divisors[i];
-
- if (src_table->multipliers && i < src_table->nr_multipliers)
- mult = src_table->multipliers[i];
-
- if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
- freq = CPUFREQ_ENTRY_INVALID;
- else
- freq = clk->parent->rate * mult / div;
-
- freq_table[i].driver_data = i;
- freq_table[i].frequency = freq;
- }
-
- /* Termination entry */
- freq_table[i].driver_data = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-}
-
-struct clk_rate_round_data;
-
-struct clk_rate_round_data {
- unsigned long rate;
- unsigned int min, max;
- long (*func)(unsigned int, struct clk_rate_round_data *);
- void *arg;
-};
-
-#define for_each_frequency(pos, r, freq) \
- for (pos = r->min, freq = r->func(pos, r); \
- pos <= r->max; pos++, freq = r->func(pos, r)) \
- if (unlikely(freq == 0)) \
- ; \
- else
-
-static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
-{
- unsigned long rate_error, rate_error_prev = ~0UL;
- unsigned long highest, lowest, freq;
- long rate_best_fit = -ENOENT;
- int i;
-
- highest = 0;
- lowest = ~0UL;
-
- for_each_frequency(i, rounder, freq) {
- if (freq > highest)
- highest = freq;
- if (freq < lowest)
- lowest = freq;
-
- rate_error = abs(freq - rounder->rate);
- if (rate_error < rate_error_prev) {
- rate_best_fit = freq;
- rate_error_prev = rate_error;
- }
-
- if (rate_error == 0)
- break;
- }
-
- if (rounder->rate >= highest)
- rate_best_fit = highest;
- if (rounder->rate <= lowest)
- rate_best_fit = lowest;
-
- return rate_best_fit;
-}
-
-static long clk_rate_table_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- struct cpufreq_frequency_table *freq_table = rounder->arg;
- unsigned long freq = freq_table[pos].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- freq = 0;
-
- return freq;
-}
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct clk_rate_round_data table_round = {
- .min = 0,
- .max = clk->nr_freqs - 1,
- .func = clk_rate_table_iter,
- .arg = freq_table,
- .rate = rate,
- };
-
- if (clk->nr_freqs < 1)
- return -ENOSYS;
-
- return clk_rate_round_helper(&table_round);
-}
-
-static long clk_rate_div_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) / pos;
-}
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate)
-{
- struct clk_rate_round_data div_range_round = {
- .min = div_min,
- .max = div_max,
- .func = clk_rate_div_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&div_range_round);
-}
-
-static long clk_rate_mult_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) * pos;
-}
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate)
-{
- struct clk_rate_round_data mult_range_round = {
- .min = mult_min,
- .max = mult_max,
- .func = clk_rate_mult_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&mult_range_round);
-}
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct cpufreq_frequency_table *pos;
- int idx;
-
- cpufreq_for_each_valid_entry_idx(pos, freq_table, idx)
- if (pos->frequency == rate)
- return idx;
-
- return -ENOENT;
-}
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent ? clk->parent->rate : 0;
-}
-
-int clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- return 0;
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
-
- propagate_rate(clkp);
- }
-}
-
-static void __clk_disable(struct clk *clk)
-{
- if (WARN(!clk->usecount, "Trying to disable clock %p with 0 usecount\n",
- clk))
- return;
-
- if (!(--clk->usecount)) {
- if (likely(allow_disable && clk->ops && clk->ops->disable))
- clk->ops->disable(clk);
- if (likely(clk->parent))
- __clk_disable(clk->parent);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (!clk)
- return;
-
- spin_lock_irqsave(&clock_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount++ == 0) {
- if (clk->parent) {
- ret = __clk_enable(clk->parent);
- if (unlikely(ret))
- goto err;
- }
-
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->parent)
- __clk_disable(clk->parent);
- goto err;
- }
- }
- }
-
- return ret;
-err:
- clk->usecount--;
- return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (!clk)
- return -EINVAL;
-
- spin_lock_irqsave(&clock_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static struct clk_mapping dummy_mapping;
-
-static struct clk *lookup_root_clock(struct clk *clk)
-{
- while (clk->parent)
- clk = clk->parent;
-
- return clk;
-}
-
-static int clk_establish_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /*
- * Propagate mappings.
- */
- if (!mapping) {
- struct clk *clkp;
-
- /*
- * dummy mapping for root clocks with no specified ranges
- */
- if (!clk->parent) {
- clk->mapping = &dummy_mapping;
- goto out;
- }
-
- /*
- * If we're on a child clock and it provides no mapping of its
- * own, inherit the mapping from its root clock.
- */
- clkp = lookup_root_clock(clk);
- mapping = clkp->mapping;
- BUG_ON(!mapping);
- }
-
- /*
- * Establish initial mapping.
- */
- if (!mapping->base && mapping->phys) {
- kref_init(&mapping->ref);
-
- mapping->base = ioremap(mapping->phys, mapping->len);
- if (unlikely(!mapping->base))
- return -ENXIO;
- } else if (mapping->base) {
- /*
- * Bump the refcount for an existing mapping
- */
- kref_get(&mapping->ref);
- }
-
- clk->mapping = mapping;
-out:
- clk->mapped_reg = clk->mapping->base;
- clk->mapped_reg += (phys_addr_t)clk->enable_reg - clk->mapping->phys;
- return 0;
-}
-
-static void clk_destroy_mapping(struct kref *kref)
-{
- struct clk_mapping *mapping;
-
- mapping = container_of(kref, struct clk_mapping, ref);
-
- iounmap(mapping->base);
-}
-
-static void clk_teardown_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /* Nothing to do */
- if (mapping == &dummy_mapping)
- goto out;
-
- kref_put(&mapping->ref, clk_destroy_mapping);
- clk->mapping = NULL;
-out:
- clk->mapped_reg = NULL;
-}
-
-int clk_register(struct clk *clk)
-{
- int ret;
-
- if (IS_ERR_OR_NULL(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clock_list_sem);
-
- INIT_LIST_HEAD(&clk->children);
- clk->usecount = 0;
-
- ret = clk_establish_mapping(clk);
- if (unlikely(ret))
- goto out_unlock;
-
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clock_list);
-
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- if (clk->ops && clk->ops->init)
- clk->ops->init(clk);
-#endif
-
-out_unlock:
- mutex_unlock(&clock_list_sem);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- mutex_lock(&clock_list_sem);
- list_del(&clk->sibling);
- list_del(&clk->node);
- clk_teardown_mapping(clk);
- mutex_unlock(&clock_list_sem);
-}
-EXPORT_SYMBOL_GPL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node)
- if (clkp->flags & CLK_ENABLE_ON_INIT)
- clk_enable(clkp);
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0;
-
- return clk->rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EOPNOTSUPP;
- unsigned long flags;
-
- if (!clk)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
-
- if (likely(clk->ops && clk->ops->set_rate)) {
- ret = clk->ops->set_rate(clk, rate);
- if (ret != 0)
- goto out_unlock;
- } else {
- clk->rate = rate;
- ret = 0;
- }
-
- if (clk->ops && clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
-
- propagate_rate(clk);
-
-out_unlock:
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!parent || !clk)
- return ret;
- if (clk->parent == parent)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
- if (clk->usecount == 0) {
- if (clk->ops->set_parent)
- ret = clk->ops->set_parent(clk, parent);
- else
- ret = clk_reparent(clk, parent);
-
- if (ret == 0) {
- if (clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
- pr_debug("set parent of %p to %p (new rate %ld)\n",
- clk, clk->parent, clk->rate);
- propagate_rate(clk);
- }
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
-
- if (likely(clk->ops && clk->ops->round_rate)) {
- unsigned long flags, rounded;
-
- spin_lock_irqsave(&clock_lock, flags);
- rounded = clk->ops->round_rate(clk, rate);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return rounded;
- }
-
- return clk_get_rate(clk);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-#ifdef CONFIG_PM
-static void clks_core_resume(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->usecount && clkp->ops)) {
- unsigned long rate = clkp->rate;
-
- if (likely(clkp->ops->set_parent))
- clkp->ops->set_parent(clkp,
- clkp->parent);
- if (likely(clkp->ops->set_rate))
- clkp->ops->set_rate(clkp, rate);
- else if (likely(clkp->ops->recalc))
- clkp->rate = clkp->ops->recalc(clkp);
- }
- }
-}
-
-static struct syscore_ops clks_syscore_ops = {
- .resume = clks_core_resume,
-};
-
-static int __init clk_syscore_init(void)
-{
- register_syscore_ops(&clks_syscore_ops);
-
- return 0;
-}
-subsys_initcall(clk_syscore_init);
-#endif
-
-static int __init clk_late_init(void)
-{
- unsigned long flags;
- struct clk *clk;
-
- /* disable all clocks with zero use count */
- mutex_lock(&clock_list_sem);
- spin_lock_irqsave(&clock_lock, flags);
-
- list_for_each_entry(clk, &clock_list, node)
- if (!clk->usecount && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- /* from now on allow clock disable operations */
- allow_disable = 1;
-
- spin_unlock_irqrestore(&clock_lock, flags);
- mutex_unlock(&clock_list_sem);
- return 0;
-}
-late_initcall(clk_late_init);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
deleted file mode 100644
index fd72d9088bdcbc..00000000000000
--- a/drivers/sh/clk/cpg.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Helper routines for SuperH Clock Pulse Generator blocks (CPG).
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-
-#define CPG_CKSTP_BIT BIT(8)
-
-static unsigned int sh_clk_read(struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- return ioread8(clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- return ioread16(clk->mapped_reg);
-
- return ioread32(clk->mapped_reg);
-}
-
-static void sh_clk_write(int value, struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- iowrite8(value, clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- iowrite16(value, clk->mapped_reg);
- else
- iowrite32(value, clk->mapped_reg);
-}
-
-static int sh_clk_mstp_enable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
- if (clk->status_reg) {
- unsigned int (*read)(const void __iomem *addr);
- int i;
- void __iomem *mapped_status = (phys_addr_t)clk->status_reg -
- (phys_addr_t)clk->enable_reg + clk->mapped_reg;
-
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- read = ioread8;
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- read = ioread16;
- else
- read = ioread32;
-
- for (i = 1000;
- (read(mapped_status) & (1 << clk->enable_bit)) && i;
- i--)
- cpu_relax();
- if (!i) {
- pr_err("cpg: failed to enable %p[%d]\n",
- clk->enable_reg, clk->enable_bit);
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
-static void sh_clk_mstp_disable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) | (1 << clk->enable_bit), clk);
-}
-
-static struct sh_clk_ops sh_clk_mstp_clk_ops = {
- .enable = sh_clk_mstp_enable,
- .disable = sh_clk_mstp_disable,
- .recalc = followparent_recalc,
-};
-
-int __init sh_clk_mstp_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &sh_clk_mstp_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-/*
- * Div/mult table lookup helpers
- */
-static inline struct clk_div_table *clk_to_div_table(struct clk *clk)
-{
- return clk->priv;
-}
-
-static inline struct clk_div_mult_table *clk_to_div_mult_table(struct clk *clk)
-{
- return clk_to_div_table(clk)->div_mult_table;
-}
-
-/*
- * Common div ops
- */
-static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static unsigned long sh_clk_div_recalc(struct clk *clk)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- unsigned int idx;
-
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, clk->arch_flags ? &clk->arch_flags : NULL);
-
- idx = (sh_clk_read(clk) >> clk->enable_bit) & clk->div_mask;
-
- return clk->freq_table[idx].frequency;
-}
-
-static int sh_clk_div_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk_div_table *dt = clk_to_div_table(clk);
- unsigned long value;
- int idx;
-
- idx = clk_rate_table_find(clk, clk->freq_table, rate);
- if (idx < 0)
- return idx;
-
- value = sh_clk_read(clk);
- value &= ~(clk->div_mask << clk->enable_bit);
- value |= (idx << clk->enable_bit);
- sh_clk_write(value, clk);
-
- /* XXX: Should use a post-change notifier */
- if (dt->kick)
- dt->kick(clk);
-
- return 0;
-}
-
-static int sh_clk_div_enable(struct clk *clk)
-{
- if (clk->div_mask == SH_CLK_DIV6_MSK) {
- int ret = sh_clk_div_set_rate(clk, clk->rate);
- if (ret < 0)
- return ret;
- }
-
- sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk);
- return 0;
-}
-
-static void sh_clk_div_disable(struct clk *clk)
-{
- unsigned int val;
-
- val = sh_clk_read(clk);
- val |= CPG_CKSTP_BIT;
-
- /*
- * div6 clocks require the divisor field to be non-zero or the
- * above CKSTP toggle silently fails. Ensure that the divisor
- * array is reset to its initial state on disable.
- */
- if (clk->flags & CLK_MASK_DIV_ON_DISABLE)
- val |= clk->div_mask;
-
- sh_clk_write(val, clk);
-}
-
-static struct sh_clk_ops sh_clk_div_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
-};
-
-static struct sh_clk_ops sh_clk_div_enable_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
-};
-
-static int __init sh_clk_init_parent(struct clk *clk)
-{
- u32 val;
-
- if (clk->parent)
- return 0;
-
- if (!clk->parent_table || !clk->parent_num)
- return 0;
-
- if (!clk->src_width) {
- pr_err("sh_clk_init_parent: cannot select parent clock\n");
- return -EINVAL;
- }
-
- val = (sh_clk_read(clk) >> clk->src_shift);
- val &= (1 << clk->src_width) - 1;
-
- if (val >= clk->parent_num) {
- pr_err("sh_clk_init_parent: parent table size failed\n");
- return -EINVAL;
- }
-
- clk_reparent(clk, clk->parent_table[val]);
- if (!clk->parent) {
- pr_err("sh_clk_init_parent: unable to set parent");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int __init sh_clk_div_register_ops(struct clk *clks, int nr,
- struct clk_div_table *table, struct sh_clk_ops *ops)
-{
- struct clk *clkp;
- void *freq_table;
- int nr_divs = table->div_mult_table->nr_divisors;
- int freq_table_size = sizeof(struct cpufreq_frequency_table);
- int ret = 0;
- int k;
-
- freq_table_size *= (nr_divs + 1);
- freq_table = kcalloc(nr, freq_table_size, GFP_KERNEL);
- if (!freq_table) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
-
- clkp->ops = ops;
- clkp->priv = table;
-
- clkp->freq_table = freq_table + (k * freq_table_size);
- clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
- ret = clk_register(clkp);
- if (ret == 0)
- ret = sh_clk_init_parent(clkp);
- }
-
- return ret;
-}
-
-/*
- * div6 support
- */
-static int sh_clk_div6_divisors[64] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
- 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
- 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
-};
-
-static struct clk_div_mult_table div6_div_mult_table = {
- .divisors = sh_clk_div6_divisors,
- .nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
-};
-
-static struct clk_div_table sh_clk_div6_table = {
- .div_mult_table = &div6_div_mult_table,
-};
-
-static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret, i;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- value = sh_clk_read(clk) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- sh_clk_write(value | (i << clk->src_shift), clk);
-
- /* Rebuild the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, NULL);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .round_rate = sh_clk_div_round_rate,
- .set_rate = sh_clk_div_set_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div6_set_parent,
-};
-
-int __init sh_clk_div6_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div6_reparent_clk_ops);
-}
-
-/*
- * div4 support
- */
-static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret;
-
- /* we really need a better way to determine parent index, but for
- * now assume internal parent comes with CLK_ENABLE_ON_INIT set,
- * no CLK_ENABLE_ON_INIT means external clock...
- */
-
- if (parent->flags & CLK_ENABLE_ON_INIT)
- value = sh_clk_read(clk) & ~(1 << 7);
- else
- value = sh_clk_read(clk) | (1 << 7);
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- sh_clk_write(value, clk);
-
- /* Rebiuld the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, &clk->arch_flags);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div4_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div4_set_parent,
-};
-
-int __init sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div_clk_ops);
-}
-
-int __init sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div4_reparent_clk_ops);
-}
-
-/* FSI-DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base);
-
- value >>= 16;
- if (value < 2)
- return clk->parent->rate;
-
- return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_div_range_round(clk, 1, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
- __raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base) >> 16;
- if (value < 2)
- return 0;
-
- __raw_writel((value << 16) | 0x3, clk->mapping->base);
-
- return 0;
-}
-
-static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-{
- int idx;
-
- idx = (clk->parent->rate / rate) & 0xffff;
- if (idx < 2)
- __raw_writel(0, clk->mapping->base);
- else
- __raw_writel(idx << 16, clk->mapping->base);
-
- return 0;
-}
-
-static struct sh_clk_ops fsidiv_clk_ops = {
- .recalc = fsidiv_recalc,
- .round_rate = fsidiv_round_rate,
- .set_rate = fsidiv_set_rate,
- .enable = fsidiv_enable,
- .disable = fsidiv_disable,
-};
-
-int __init sh_clk_fsidiv_register(struct clk *clks, int nr)
-{
- struct clk_mapping *map;
- int i;
-
- for (i = 0; i < nr; i++) {
-
- map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL);
- if (!map) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- /* clks[i].enable_reg came from SH_CLK_FSIDIV() */
- map->phys = (phys_addr_t)clks[i].enable_reg;
- map->len = 8;
-
- clks[i].enable_reg = 0; /* remove .enable_reg */
- clks[i].ops = &fsidiv_clk_ops;
- clks[i].mapping = map;
-
- clk_register(&clks[i]);
- }
-
- return 0;
-}
diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
deleted file mode 100644
index 5c701709fef528..00000000000000
--- a/drivers/sh/intc/Kconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config SH_INTC
- bool
- select IRQ_DOMAIN
-
-if SH_INTC
-
-comment "Interrupt controller options"
-
-config INTC_USERIMASK
- bool "Userspace interrupt masking support"
- depends on (SUPERH && CPU_SH4A) || COMPILE_TEST
- help
- This enables support for hardware-assisted userspace hardirq
- masking.
-
- SH-4A and newer interrupt blocks all support a special shadowed
- page with all non-masking registers obscured when mapped in to
- userspace. This is primarily for use by userspace device
- drivers that are using special priority levels.
-
- If in doubt, say N.
-
-config INTC_BALANCING
- bool "Hardware IRQ balancing support"
- depends on SMP && SUPERH && CPU_SHX3
- help
- This enables support for IRQ auto-distribution mode on SH-X3
- SMP parts. All of the balancing and CPU wakeup decisions are
- taken care of automatically by hardware for distributed
- vectors.
-
- If in doubt, say N.
-
-config INTC_MAPPING_DEBUG
- bool "Expose IRQ to per-controller id mapping via debugfs"
- depends on DEBUG_FS
- help
- This will create a debugfs entry for showing the relationship
- between system IRQs and the per-controller id tables.
-
- If in doubt, say N.
-
-endif
diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile
deleted file mode 100644
index bdd855327e41d5..00000000000000
--- a/drivers/sh/intc/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o
-
-obj-$(CONFIG_INTC_BALANCING) += balancing.o
-obj-$(CONFIG_INTC_USERIMASK) += userimask.o
-obj-$(CONFIG_INTC_MAPPING_DEBUG) += virq-debugfs.o
diff --git a/drivers/sh/intc/access.c b/drivers/sh/intc/access.c
deleted file mode 100644
index 114390f967d26e..00000000000000
--- a/drivers/sh/intc/access.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Common INTC2 register accessors
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include "internals.h"
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address)
-{
- struct intc_window *window;
- int k;
-
- /* scan through physical windows and convert address */
- for (k = 0; k < d->nr_windows; k++) {
- window = d->window + k;
-
- if (address < window->phys)
- continue;
-
- if (address >= (window->phys + window->size))
- continue;
-
- address -= window->phys;
- address += (unsigned long)window->virt;
-
- return address;
- }
-
- /* no windows defined, register must be 1:1 mapped virt:phys */
- return address;
-}
-
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address)
-{
- unsigned int k;
-
- address = intc_phys_to_virt(d, address);
-
- for (k = 0; k < d->nr_reg; k++) {
- if (d->reg[k] == address)
- return k;
- }
-
- BUG();
- return 0;
-}
-
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
-
- value &= ~(((1 << width) - 1) << shift);
- value |= field_value << shift;
- return value;
-}
-
-unsigned long intc_get_field_from_handle(unsigned int value, unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
- unsigned int mask = ((1 << width) - 1) << shift;
-
- return (value & mask) >> shift;
-}
-
-static unsigned long test_8(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readb(ptr), h);
-}
-
-static unsigned long test_16(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readw(ptr), h);
-}
-
-static unsigned long test_32(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readl(ptr), h);
-}
-
-static unsigned long write_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writeb(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writew(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writel(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long modify_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readb(ptr), data, h);
- __raw_writeb(value, ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readw(ptr), data, h);
- __raw_writew(value, ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readl(ptr), data, h);
- __raw_writel(value, ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long intc_mode_field(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1));
-}
-
-static unsigned long intc_mode_zero(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, 0);
-}
-
-static unsigned long intc_mode_prio(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, intc_get_prio_level(irq));
-}
-
-unsigned long (*intc_reg_fns[])(unsigned long addr,
- unsigned long h,
- unsigned long data) = {
- [REG_FN_TEST_BASE + 0] = test_8,
- [REG_FN_TEST_BASE + 1] = test_16,
- [REG_FN_TEST_BASE + 3] = test_32,
- [REG_FN_WRITE_BASE + 0] = write_8,
- [REG_FN_WRITE_BASE + 1] = write_16,
- [REG_FN_WRITE_BASE + 3] = write_32,
- [REG_FN_MODIFY_BASE + 0] = modify_8,
- [REG_FN_MODIFY_BASE + 1] = modify_16,
- [REG_FN_MODIFY_BASE + 3] = modify_32,
-};
-
-unsigned long (*intc_enable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_prio,
- [MODE_PCLR_REG] = intc_mode_prio,
-};
-
-unsigned long (*intc_disable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_zero,
- [MODE_MASK_REG] = intc_mode_field,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_zero,
- [MODE_PCLR_REG] = intc_mode_field,
-};
-
-unsigned long (*intc_enable_noprio_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_field,
- [MODE_PCLR_REG] = intc_mode_field,
-};
diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c
deleted file mode 100644
index bc780807ccb0fe..00000000000000
--- a/drivers/sh/intc/balancing.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Support for hardware-managed IRQ auto-distribution.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "internals.h"
-
-static unsigned long dist_handle[INTC_NR_IRQS];
-
-void intc_balancing_enable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 1);
-}
-
-void intc_balancing_disable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 0);
-}
-
-static unsigned int intc_dist_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_mask_regs; i++) {
- mr = desc->hw.mask_regs + i;
-
- /*
- * Skip this entry if there's no auto-distribution
- * register associated with it.
- */
- if (!mr->dist_reg)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->dist_reg;
- reg_d = mr->dist_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- /*
- * It's possible we've gotten here with no distribution options
- * available for the IRQ in question, so we just skip over those.
- */
- return 0;
-}
-
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.mask_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- dist_handle[irq] = intc_dist_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
deleted file mode 100644
index 828d81e02b37ab..00000000000000
--- a/drivers/sh/intc/chip.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * IRQ chip definitions for INTC IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/cpumask.h>
-#include <linux/bsearch.h>
-#include <linux/io.h>
-#include "internals.h"
-
-void _intc_enable(struct irq_data *data, unsigned long handle)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long addr;
- unsigned int cpu;
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-
- intc_balancing_enable(irq);
-}
-
-static void intc_enable(struct irq_data *data)
-{
- _intc_enable(data, (unsigned long)irq_data_get_irq_chip_data(data));
-}
-
-static void intc_disable(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = (unsigned long)irq_data_get_irq_chip_data(data);
- unsigned long addr;
- unsigned int cpu;
-
- intc_balancing_disable(irq);
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-}
-
-#ifdef CONFIG_SMP
-/*
- * This is held with the irq desc lock held, so we don't require any
- * additional locking here at the intc desc level. The affinity mask is
- * later tested in the enable/disable paths.
- */
-static int intc_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask,
- bool force)
-{
- if (!cpumask_intersects(cpumask, cpu_online_mask))
- return -1;
-
- irq_data_update_affinity(data, cpumask);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif
-
-static void intc_mask_ack(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = intc_get_ack_handle(irq);
- void __iomem *addr;
-
- intc_disable(data);
-
- /* read register and write zero only to the associated bit */
- if (handle) {
- unsigned int value;
-
- addr = (void __iomem *)INTC_REG(d, _INTC_ADDR_D(handle), 0);
- value = intc_set_field_from_handle(0, 1, handle);
-
- switch (_INTC_FN(handle)) {
- case REG_FN_MODIFY_BASE + 0: /* 8bit */
- __raw_readb(addr);
- __raw_writeb(0xff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 1: /* 16bit */
- __raw_readw(addr);
- __raw_writew(0xffff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 3: /* 32bit */
- __raw_readl(addr);
- __raw_writel(0xffffffff ^ value, addr);
- break;
- default:
- BUG();
- break;
- }
- }
-}
-
-static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
- unsigned int nr_hp,
- unsigned int irq)
-{
- struct intc_handle_int key;
-
- key.irq = irq;
- key.handle = 0;
-
- return bsearch(&key, hp, nr_hp, sizeof(*hp), intc_handle_int_cmp);
-}
-
-int intc_set_priority(unsigned int irq, unsigned int prio)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- struct irq_data *data = irq_get_irq_data(irq);
- struct intc_handle_int *ihp;
-
- if (!intc_get_prio_level(irq) || prio <= 1)
- return -EINVAL;
-
- ihp = intc_find_irq(d->prio, d->nr_prio, irq);
- if (ihp) {
- if (prio >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- intc_set_prio_level(irq, prio);
-
- /*
- * only set secondary masking method directly
- * primary masking method is using intc_prio_level[irq]
- * priority level will be set during next enable()
- */
- if (_INTC_FN(ihp->handle) != REG_FN_ERR)
- _intc_enable(data, ihp->handle);
- }
- return 0;
-}
-
-#define SENSE_VALID_FLAG 0x80
-#define VALID(x) (x | SENSE_VALID_FLAG)
-
-static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
- [IRQ_TYPE_EDGE_FALLING] = VALID(0),
- [IRQ_TYPE_EDGE_RISING] = VALID(1),
- [IRQ_TYPE_LEVEL_LOW] = VALID(2),
- /* SH7706, SH7707 and SH7709 do not support high level triggered */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7709)
- [IRQ_TYPE_LEVEL_HIGH] = VALID(3),
-#endif
-#if defined(CONFIG_ARM) /* all recent SH-Mobile / R-Mobile ARM support this */
- [IRQ_TYPE_EDGE_BOTH] = VALID(4),
-#endif
-};
-
-static int intc_set_type(struct irq_data *data, unsigned int type)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK];
- struct intc_handle_int *ihp;
- unsigned long addr;
-
- if (!value)
- return -EINVAL;
-
- value &= ~SENSE_VALID_FLAG;
-
- ihp = intc_find_irq(d->sense, d->nr_sense, irq);
- if (ihp) {
- /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
- if (value >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
- }
-
- return 0;
-}
-
-struct irq_chip intc_irq_chip = {
- .irq_mask = intc_disable,
- .irq_unmask = intc_enable,
- .irq_mask_ack = intc_mask_ack,
- .irq_enable = intc_enable,
- .irq_disable = intc_disable,
- .irq_set_type = intc_set_type,
-#ifdef CONFIG_SMP
- .irq_set_affinity = intc_set_affinity,
-#endif
- .flags = IRQCHIP_SKIP_SET_WAKE,
-};
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
deleted file mode 100644
index ca4f4ca413f11d..00000000000000
--- a/drivers/sh/intc/core.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * Based on intc2.c and ipr.c
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2005, 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/irqdomain.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/radix-tree.h>
-#include <linux/export.h>
-#include <linux/sort.h>
-#include "internals.h"
-
-LIST_HEAD(intc_list);
-DEFINE_RAW_SPINLOCK(intc_big_lock);
-static unsigned int nr_intc_controllers;
-
-/*
- * Default priority level
- * - this needs to be at least 2 for 5-bit priorities on 7780
- */
-static unsigned int default_prio_level = 2; /* 2 - 16 */
-static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */
-
-unsigned int intc_get_dfl_prio_level(void)
-{
- return default_prio_level;
-}
-
-unsigned int intc_get_prio_level(unsigned int irq)
-{
- return intc_prio_level[irq];
-}
-
-void intc_set_prio_level(unsigned int irq, unsigned int level)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_prio_level[irq] = level;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-static void intc_redirect_irq(struct irq_desc *desc)
-{
- generic_handle_irq((unsigned int)irq_desc_get_handler_data(desc));
-}
-
-static void __init intc_register_irq(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int irq)
-{
- struct intc_handle_int *hp;
- struct irq_data *irq_data;
- unsigned int data[2], primary;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-
- /*
- * Prefer single interrupt source bitmap over other combinations:
- *
- * 1. bitmap, single interrupt source
- * 2. priority, single interrupt source
- * 3. bitmap, multiple interrupt sources (groups)
- * 4. priority, multiple interrupt sources (groups)
- */
- data[0] = intc_get_mask_handle(desc, d, enum_id, 0);
- data[1] = intc_get_prio_handle(desc, d, enum_id, 0);
-
- primary = 0;
- if (!data[0] && data[1])
- primary = 1;
-
- if (!data[0] && !data[1])
- pr_warn("missing unique irq mask for irq %d (vect 0x%04x)\n",
- irq, irq2evt(irq));
-
- data[0] = data[0] ? data[0] : intc_get_mask_handle(desc, d, enum_id, 1);
- data[1] = data[1] ? data[1] : intc_get_prio_handle(desc, d, enum_id, 1);
-
- if (!data[primary])
- primary ^= 1;
-
- BUG_ON(!data[primary]); /* must have primary masking method */
-
- irq_data = irq_get_irq_data(irq);
-
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &d->chip, handle_level_irq,
- "level");
- irq_set_chip_data(irq, (void *)data[primary]);
-
- /*
- * set priority level
- */
- intc_set_prio_level(irq, intc_get_dfl_prio_level());
-
- /* enable secondary masking method if present */
- if (data[!primary])
- _intc_enable(irq_data, data[!primary]);
-
- /* add irq to d->prio list if priority is available */
- if (data[1]) {
- hp = d->prio + d->nr_prio;
- hp->irq = irq;
- hp->handle = data[1];
-
- if (primary) {
- /*
- * only secondary priority should access registers, so
- * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority()
- */
- hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0);
- hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0);
- }
- d->nr_prio++;
- }
-
- /* add irq to d->sense list if sense is available */
- data[0] = intc_get_sense_handle(desc, d, enum_id);
- if (data[0]) {
- (d->sense + d->nr_sense)->irq = irq;
- (d->sense + d->nr_sense)->handle = data[0];
- d->nr_sense++;
- }
-
- /* irq should be disabled by default */
- d->chip.irq_mask(irq_data);
-
- intc_set_ack_handle(irq, desc, d, enum_id);
- intc_set_dist_handle(irq, desc, d, enum_id);
-
- activate_irq(irq);
-}
-
-static unsigned int __init save_reg(struct intc_desc_int *d,
- unsigned int cnt,
- unsigned long value,
- unsigned int smp)
-{
- if (value) {
- value = intc_phys_to_virt(d, value);
-
- d->reg[cnt] = value;
-#ifdef CONFIG_SMP
- d->smp[cnt] = smp;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-static bool __init intc_map(struct irq_domain *domain, int irq)
-{
- if (!irq_to_desc(irq) && irq_alloc_desc_at(irq, NUMA_NO_NODE) != irq) {
- pr_err("uname to allocate IRQ %d\n", irq);
- return false;
- }
-
- if (irq_domain_associate(domain, irq, irq)) {
- pr_err("domain association failure\n");
- return false;
- }
-
- return true;
-}
-
-int __init register_intc_controller(struct intc_desc *desc)
-{
- unsigned int i, k, smp;
- struct intc_hw_desc *hw = &desc->hw;
- struct intc_desc_int *d;
- struct resource *res;
-
- pr_info("Registered controller '%s' with %u IRQs\n",
- desc->name, hw->nr_vectors);
-
- d = kzalloc(sizeof(*d), GFP_NOWAIT);
- if (!d)
- goto err0;
-
- INIT_LIST_HEAD(&d->list);
- list_add_tail(&d->list, &intc_list);
-
- raw_spin_lock_init(&d->lock);
- INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
-
- d->index = nr_intc_controllers;
-
- if (desc->num_resources) {
- d->nr_windows = desc->num_resources;
- d->window = kcalloc(d->nr_windows, sizeof(*d->window),
- GFP_NOWAIT);
- if (!d->window)
- goto err1;
-
- for (k = 0; k < d->nr_windows; k++) {
- res = desc->resource + k;
- WARN_ON(resource_type(res) != IORESOURCE_MEM);
- d->window[k].phys = res->start;
- d->window[k].size = resource_size(res);
- d->window[k].virt = ioremap(res->start,
- resource_size(res));
- if (!d->window[k].virt)
- goto err2;
- }
- }
-
- d->nr_reg = hw->mask_regs ? hw->nr_mask_regs * 2 : 0;
-#ifdef CONFIG_INTC_BALANCING
- if (d->nr_reg)
- d->nr_reg += hw->nr_mask_regs;
-#endif
- d->nr_reg += hw->prio_regs ? hw->nr_prio_regs * 2 : 0;
- d->nr_reg += hw->sense_regs ? hw->nr_sense_regs : 0;
- d->nr_reg += hw->ack_regs ? hw->nr_ack_regs : 0;
- d->nr_reg += hw->subgroups ? hw->nr_subgroups : 0;
-
- d->reg = kcalloc(d->nr_reg, sizeof(*d->reg), GFP_NOWAIT);
- if (!d->reg)
- goto err2;
-
-#ifdef CONFIG_SMP
- d->smp = kcalloc(d->nr_reg, sizeof(*d->smp), GFP_NOWAIT);
- if (!d->smp)
- goto err3;
-#endif
- k = 0;
-
- if (hw->mask_regs) {
- for (i = 0; i < hw->nr_mask_regs; i++) {
- smp = IS_SMP(hw->mask_regs[i]);
- k += save_reg(d, k, hw->mask_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->mask_regs[i].clr_reg, smp);
-#ifdef CONFIG_INTC_BALANCING
- k += save_reg(d, k, hw->mask_regs[i].dist_reg, 0);
-#endif
- }
- }
-
- if (hw->prio_regs) {
- d->prio = kcalloc(hw->nr_vectors, sizeof(*d->prio),
- GFP_NOWAIT);
- if (!d->prio)
- goto err4;
-
- for (i = 0; i < hw->nr_prio_regs; i++) {
- smp = IS_SMP(hw->prio_regs[i]);
- k += save_reg(d, k, hw->prio_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp);
- }
-
- sort(d->prio, hw->nr_prio_regs, sizeof(*d->prio),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->sense_regs) {
- d->sense = kcalloc(hw->nr_vectors, sizeof(*d->sense),
- GFP_NOWAIT);
- if (!d->sense)
- goto err5;
-
- for (i = 0; i < hw->nr_sense_regs; i++)
- k += save_reg(d, k, hw->sense_regs[i].reg, 0);
-
- sort(d->sense, hw->nr_sense_regs, sizeof(*d->sense),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->subgroups)
- for (i = 0; i < hw->nr_subgroups; i++)
- if (hw->subgroups[i].reg)
- k+= save_reg(d, k, hw->subgroups[i].reg, 0);
-
- memcpy(&d->chip, &intc_irq_chip, sizeof(struct irq_chip));
- d->chip.name = desc->name;
-
- if (hw->ack_regs)
- for (i = 0; i < hw->nr_ack_regs; i++)
- k += save_reg(d, k, hw->ack_regs[i].set_reg, 0);
- else
- d->chip.irq_mask_ack = d->chip.irq_disable;
-
- /* disable bits matching force_disable before registering irqs */
- if (desc->force_disable)
- intc_enable_disable_enum(desc, d, desc->force_disable, 0);
-
- /* disable bits matching force_enable before registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 0);
-
- BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
- intc_irq_domain_init(d, hw);
-
- /* register the vectors one by one */
- for (i = 0; i < hw->nr_vectors; i++) {
- struct intc_vect *vect = hw->vectors + i;
- unsigned int irq = evt2irq(vect->vect);
-
- if (!vect->enum_id)
- continue;
-
- if (!intc_map(d->domain, irq))
- continue;
-
- intc_irq_xlate_set(irq, vect->enum_id, d);
- intc_register_irq(desc, d, vect->enum_id, irq);
-
- for (k = i + 1; k < hw->nr_vectors; k++) {
- struct intc_vect *vect2 = hw->vectors + k;
- unsigned int irq2 = evt2irq(vect2->vect);
-
- if (vect->enum_id != vect2->enum_id)
- continue;
-
- /*
- * In the case of multi-evt handling and sparse
- * IRQ support, each vector still needs to have
- * its own backing irq_desc.
- */
- if (!intc_map(d->domain, irq2))
- continue;
-
- vect2->enum_id = 0;
-
- /* redirect this interrupts to the first one */
- irq_set_chip(irq2, &dummy_irq_chip);
- irq_set_chained_handler_and_data(irq2,
- intc_redirect_irq,
- (void *)irq);
- }
- }
-
- intc_subgroup_init(desc, d);
-
- /* enable bits matching force_enable after registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 1);
-
- d->skip_suspend = desc->skip_syscore_suspend;
-
- nr_intc_controllers++;
-
- return 0;
-err5:
- kfree(d->prio);
-err4:
-#ifdef CONFIG_SMP
- kfree(d->smp);
-err3:
-#endif
- kfree(d->reg);
-err2:
- for (k = 0; k < d->nr_windows; k++)
- if (d->window[k].virt)
- iounmap(d->window[k].virt);
-
- kfree(d->window);
-err1:
- kfree(d);
-err0:
- pr_err("unable to allocate INTC memory\n");
-
- return -ENOMEM;
-}
-
-static int intc_suspend(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- /* enable wakeup irqs belonging to this intc controller */
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- if (chip != &d->chip)
- continue;
- if (irqd_is_wakeup_set(data))
- chip->irq_enable(data);
- }
- }
- return 0;
-}
-
-static void intc_resume(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- /*
- * This will catch the redirect and VIRQ cases
- * due to the dummy_irq_chip being inserted.
- */
- if (chip != &d->chip)
- continue;
- if (irqd_irq_disabled(data))
- chip->irq_disable(data);
- else
- chip->irq_enable(data);
- }
- }
-}
-
-struct syscore_ops intc_syscore_ops = {
- .suspend = intc_suspend,
- .resume = intc_resume,
-};
-
-struct bus_type intc_subsys = {
- .name = "intc",
- .dev_name = "intc",
-};
-
-static ssize_t
-show_intc_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct intc_desc_int *d;
-
- d = container_of(dev, struct intc_desc_int, dev);
-
- return sprintf(buf, "%s\n", d->chip.name);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, show_intc_name, NULL);
-
-static int __init register_intc_devs(void)
-{
- struct intc_desc_int *d;
- int error;
-
- register_syscore_ops(&intc_syscore_ops);
-
- error = subsys_system_register(&intc_subsys, NULL);
- if (!error) {
- list_for_each_entry(d, &intc_list, list) {
- d->dev.id = d->index;
- d->dev.bus = &intc_subsys;
- error = device_register(&d->dev);
- if (error == 0)
- error = device_create_file(&d->dev,
- &dev_attr_name);
- if (error)
- break;
- }
- }
-
- if (error)
- pr_err("device registration error\n");
-
- return error;
-}
-device_initcall(register_intc_devs);
diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c
deleted file mode 100644
index 7863a44918a293..00000000000000
--- a/drivers/sh/intc/handle.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include "internals.h"
-
-static unsigned long ack_handle[INTC_NR_IRQS];
-
-static intc_enum __init intc_grp_id(struct intc_desc *desc,
- intc_enum enum_id)
-{
- struct intc_group *g = desc->hw.groups;
- unsigned int i, j;
-
- for (i = 0; g && enum_id && i < desc->hw.nr_groups; i++) {
- g = desc->hw.groups + i;
-
- for (j = 0; g->enum_ids[j]; j++) {
- if (g->enum_ids[j] != enum_id)
- continue;
-
- return g->enum_id;
- }
- }
-
- return 0;
-}
-
-static unsigned int __init _intc_mask_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int fn, mode;
- unsigned long reg_e, reg_d;
-
- while (mr && enum_id && *reg_idx < desc->hw.nr_mask_regs) {
- mr = desc->hw.mask_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(mr->enum_ids); (*fld_idx)++) {
- if (mr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (mr->set_reg && mr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_DUAL_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->set_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- if (mr->set_reg) {
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
- } else {
- mode = MODE_MASK_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->clr_reg;
- }
- }
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - *fld_idx);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_mask_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_mask_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int __init _intc_prio_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_prio_reg *pr = desc->hw.prio_regs;
- unsigned int fn, n, mode, bit;
- unsigned long reg_e, reg_d;
-
- while (pr && enum_id && *reg_idx < desc->hw.nr_prio_regs) {
- pr = desc->hw.prio_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(pr->enum_ids); (*fld_idx)++) {
- if (pr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (pr->set_reg && pr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_PCLR_REG;
- reg_e = pr->set_reg;
- reg_d = pr->clr_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_PRIO_REG;
- if (!pr->set_reg)
- BUG();
- reg_e = pr->set_reg;
- reg_d = pr->set_reg;
- }
-
- fn += (pr->reg_width >> 3) - 1;
- n = *fld_idx + 1;
-
- BUG_ON(n * pr->field_width > pr->reg_width);
-
- bit = pr->reg_width - (n * pr->field_width);
-
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- pr->field_width, bit);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_prio_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_prio_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int intc_ack_data(struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.ack_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_ack_regs; i++) {
- mr = desc->hw.ack_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- return 0;
-}
-
-static void intc_enable_disable(struct intc_desc_int *d,
- unsigned long handle, int do_enable)
-{
- unsigned long addr;
- unsigned int cpu;
- unsigned long (*fn)(unsigned long, unsigned long,
- unsigned long (*)(unsigned long, unsigned long,
- unsigned long),
- unsigned int);
-
- if (do_enable) {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- fn = intc_enable_noprio_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- } else {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- fn = intc_disable_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- }
-}
-
-void __init intc_enable_disable_enum(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int enable)
-{
- unsigned int i, j, data;
-
- /* go through and enable/disable all mask bits */
- i = j = 0;
- do {
- data = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
- j++;
- } while (data);
-
- /* go through and enable/disable all priority fields */
- i = j = 0;
- do {
- data = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
-
- j++;
- } while (data);
-}
-
-unsigned int __init
-intc_get_sense_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_sense_reg *sr = desc->hw.sense_regs;
- unsigned int i, j, fn, bit;
-
- for (i = 0; sr && enum_id && i < desc->hw.nr_sense_regs; i++) {
- sr = desc->hw.sense_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
- if (sr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- fn += (sr->reg_width >> 3) - 1;
-
- BUG_ON((j + 1) * sr->field_width > sr->reg_width);
-
- bit = sr->reg_width - ((j + 1) * sr->field_width);
-
- return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg),
- 0, sr->field_width, bit);
- }
- }
-
- return 0;
-}
-
-
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.ack_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- ack_handle[irq] = intc_ack_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-unsigned long intc_get_ack_handle(unsigned int irq)
-{
- return ack_handle[irq];
-}
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
deleted file mode 100644
index fa73c173b56a60..00000000000000
--- a/drivers/sh/intc/internals.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/list.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/radix-tree.h>
-#include <linux/device.h>
-
-#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
- ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
- ((addr_e) << 16) | ((addr_d << 24)))
-
-#define _INTC_SHIFT(h) (h & 0x1f)
-#define _INTC_WIDTH(h) ((h >> 5) & 0xf)
-#define _INTC_FN(h) ((h >> 9) & 0xf)
-#define _INTC_MODE(h) ((h >> 13) & 0x7)
-#define _INTC_ADDR_E(h) ((h >> 16) & 0xff)
-#define _INTC_ADDR_D(h) ((h >> 24) & 0xff)
-
-#ifdef CONFIG_SMP
-#define IS_SMP(x) (x.smp)
-#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
-#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1)
-#else
-#define IS_SMP(x) 0
-#define INTC_REG(d, x, c) (d->reg[(x)])
-#define SMP_NR(d, x) 1
-#endif
-
-struct intc_handle_int {
- unsigned int irq;
- unsigned long handle;
-};
-
-struct intc_window {
- phys_addr_t phys;
- void __iomem *virt;
- unsigned long size;
-};
-
-struct intc_map_entry {
- intc_enum enum_id;
- struct intc_desc_int *desc;
-};
-
-struct intc_subgroup_entry {
- unsigned int pirq;
- intc_enum enum_id;
- unsigned long handle;
-};
-
-struct intc_desc_int {
- struct list_head list;
- struct device dev;
- struct radix_tree_root tree;
- raw_spinlock_t lock;
- unsigned int index;
- unsigned long *reg;
-#ifdef CONFIG_SMP
- unsigned long *smp;
-#endif
- unsigned int nr_reg;
- struct intc_handle_int *prio;
- unsigned int nr_prio;
- struct intc_handle_int *sense;
- unsigned int nr_sense;
- struct intc_window *window;
- unsigned int nr_windows;
- struct irq_domain *domain;
- struct irq_chip chip;
- bool skip_suspend;
-};
-
-
-enum {
- REG_FN_ERR = 0,
- REG_FN_TEST_BASE = 1,
- REG_FN_WRITE_BASE = 5,
- REG_FN_MODIFY_BASE = 9
-};
-
-enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
- MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */
- MODE_DUAL_REG, /* Two registers, set bit to enable / disable */
- MODE_PRIO_REG, /* Priority value written to enable interrupt */
- MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */
-};
-
-static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
-{
- struct irq_chip *chip = irq_get_chip(irq);
-
- return container_of(chip, struct intc_desc_int, chip);
-}
-
-/*
- * Grumble.
- */
-static inline void activate_irq(int irq)
-{
- irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
-}
-
-static inline int intc_handle_int_cmp(const void *a, const void *b)
-{
- const struct intc_handle_int *_a = a;
- const struct intc_handle_int *_b = b;
-
- return _a->irq - _b->irq;
-}
-
-/* access.c */
-extern unsigned long
-(*intc_reg_fns[])(unsigned long addr, unsigned long h, unsigned long data);
-
-extern unsigned long
-(*intc_enable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_disable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_enable_noprio_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle);
-unsigned long intc_get_field_from_handle(unsigned int value,
- unsigned int handle);
-
-/* balancing.c */
-#ifdef CONFIG_INTC_BALANCING
-void intc_balancing_enable(unsigned int irq);
-void intc_balancing_disable(unsigned int irq);
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-#else
-static inline void intc_balancing_enable(unsigned int irq) { }
-static inline void intc_balancing_disable(unsigned int irq) { }
-static inline void
-intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id) { }
-#endif
-
-/* chip.c */
-extern struct irq_chip intc_irq_chip;
-void _intc_enable(struct irq_data *data, unsigned long handle);
-
-/* core.c */
-extern struct list_head intc_list;
-extern raw_spinlock_t intc_big_lock;
-extern struct bus_type intc_subsys;
-
-unsigned int intc_get_dfl_prio_level(void);
-unsigned int intc_get_prio_level(unsigned int irq);
-void intc_set_prio_level(unsigned int irq, unsigned int level);
-
-/* handle.c */
-unsigned int intc_get_mask_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_prio_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_sense_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id);
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-unsigned long intc_get_ack_handle(unsigned int irq);
-void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int enable);
-
-/* irqdomain.c */
-void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw);
-
-/* virq.c */
-void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d);
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d);
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq);
diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c
deleted file mode 100644
index 3968f1c3c5c308..00000000000000
--- a/drivers/sh/intc/irqdomain.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * IRQ domain support for SH INTC subsystem
- *
- * Copyright (C) 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/irqdomain.h>
-#include <linux/sh_intc.h>
-#include <linux/export.h>
-#include "internals.h"
-
-/**
- * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs.
- *
- * This takes care of exception vector to hwirq translation through
- * by way of evt2irq() translation.
- *
- * Note: For platforms that use a flat vector space without INTEVT this
- * basically just mimics irq_domain_xlate_onecell() by way of a nopped
- * out evt2irq() implementation.
- */
-static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type)
-{
- if (WARN_ON(intsize < 1))
- return -EINVAL;
-
- *out_hwirq = evt2irq(intspec[0]);
- *out_type = IRQ_TYPE_NONE;
-
- return 0;
-}
-
-static const struct irq_domain_ops intc_evt_ops = {
- .xlate = intc_evt_xlate,
-};
-
-void __init intc_irq_domain_init(struct intc_desc_int *d,
- struct intc_hw_desc *hw)
-{
- unsigned int irq_base, irq_end;
-
- /*
- * Quick linear revmap check
- */
- irq_base = evt2irq(hw->vectors[0].vect);
- irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect);
-
- /*
- * Linear domains have a hard-wired assertion that IRQs start at
- * 0 in order to make some performance optimizations. Lamely
- * restrict the linear case to these conditions here, taking the
- * tree penalty for linear cases with non-zero hwirq bases.
- */
- if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
- d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
- &intc_evt_ops, NULL);
- else
- d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
-
- BUG_ON(!d->domain);
-}
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
deleted file mode 100644
index f9f043a3d90a23..00000000000000
--- a/drivers/sh/intc/userimask.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Support for hardware-assisted userspace interrupt masking.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/stat.h>
-#include <linux/sizes.h>
-#include "internals.h"
-
-static void __iomem *uimask;
-
-static ssize_t
-show_intc_userimask(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", (__raw_readl(uimask) >> 4) & 0xf);
-}
-
-static ssize_t
-store_intc_userimask(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned long level;
-
- level = simple_strtoul(buf, NULL, 10);
-
- /*
- * Minimal acceptable IRQ levels are in the 2 - 16 range, but
- * these are chomped so as to not interfere with normal IRQs.
- *
- * Level 1 is a special case on some CPUs in that it's not
- * directly settable, but given that USERIMASK cuts off below a
- * certain level, we don't care about this limitation here.
- * Level 0 on the other hand equates to user masking disabled.
- *
- * We use the default priority level as a cut off so that only
- * special case opt-in IRQs can be mangled.
- */
- if (level >= intc_get_dfl_prio_level())
- return -EINVAL;
-
- __raw_writel(0xa5 << 24 | level << 4, uimask);
-
- return count;
-}
-
-static DEVICE_ATTR(userimask, S_IRUSR | S_IWUSR,
- show_intc_userimask, store_intc_userimask);
-
-
-static int __init userimask_sysdev_init(void)
-{
- if (unlikely(!uimask))
- return -ENXIO;
-
- return device_create_file(intc_subsys.dev_root, &dev_attr_userimask);
-}
-late_initcall(userimask_sysdev_init);
-
-int register_intc_userimask(unsigned long addr)
-{
- if (unlikely(uimask))
- return -EBUSY;
-
- uimask = ioremap(addr, SZ_4K);
- if (unlikely(!uimask))
- return -ENOMEM;
-
- pr_info("userimask support registered for levels 0 -> %d\n",
- intc_get_dfl_prio_level() - 1);
-
- return 0;
-}
diff --git a/drivers/sh/intc/virq-debugfs.c b/drivers/sh/intc/virq-debugfs.c
deleted file mode 100644
index 939915a07d9997..00000000000000
--- a/drivers/sh/intc/virq-debugfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Support for virtual IRQ subgroups debugfs mapping.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Modelled after arch/powerpc/kernel/irq.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/seq_file.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include "internals.h"
-
-static int intc_irq_xlate_show(struct seq_file *m, void *priv)
-{
- int i;
-
- seq_printf(m, "%-5s %-7s %-15s\n", "irq", "enum", "chip name");
-
- for (i = 1; i < nr_irqs; i++) {
- struct intc_map_entry *entry = intc_irq_xlate_get(i);
- struct intc_desc_int *desc = entry->desc;
-
- if (!desc)
- continue;
-
- seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05x ", entry->enum_id);
- seq_printf(m, "%-15s\n", desc->chip.name);
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(intc_irq_xlate);
-
-static int __init intc_irq_xlate_init(void)
-{
- /*
- * XXX.. use arch_debugfs_dir here when all of the intc users are
- * converted.
- */
- if (debugfs_create_file("intc_irq_xlate", S_IRUGO, NULL, NULL,
- &intc_irq_xlate_fops) == NULL)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(intc_irq_xlate_init);
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
deleted file mode 100644
index a638c3048207c0..00000000000000
--- a/drivers/sh/intc/virq.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Support for virtual IRQ subgroups.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include "internals.h"
-
-static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS];
-
-struct intc_virq_list {
- unsigned int irq;
- struct intc_virq_list *next;
-};
-
-#define for_each_virq(entry, head) \
- for (entry = head; entry; entry = entry->next)
-
-/*
- * Tags for the radix tree
- */
-#define INTC_TAG_VIRQ_NEEDS_ALLOC 0
-
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_irq_xlate[irq].enum_id = id;
- intc_irq_xlate[irq].desc = d;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq)
-{
- return intc_irq_xlate + irq;
-}
-
-int intc_irq_lookup(const char *chipname, intc_enum enum_id)
-{
- struct intc_map_entry *ptr;
- struct intc_desc_int *d;
- int irq = -1;
-
- list_for_each_entry(d, &intc_list, list) {
- int tagged;
-
- if (strcmp(d->chip.name, chipname) != 0)
- continue;
-
- /*
- * Catch early lookups for subgroup VIRQs that have not
- * yet been allocated an IRQ. This already includes a
- * fast-path out if the tree is untagged, so there is no
- * need to explicitly test the root tree.
- */
- tagged = radix_tree_tag_get(&d->tree, enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- if (unlikely(tagged))
- break;
-
- ptr = radix_tree_lookup(&d->tree, enum_id);
- if (ptr) {
- irq = ptr - intc_irq_xlate;
- break;
- }
- }
-
- return irq;
-}
-EXPORT_SYMBOL_GPL(intc_irq_lookup);
-
-static int add_virq_to_pirq(unsigned int irq, unsigned int virq)
-{
- struct intc_virq_list *entry;
- struct intc_virq_list **last = NULL;
-
- /* scan for duplicates */
- for_each_virq(entry, irq_get_handler_data(irq)) {
- if (entry->irq == virq)
- return 0;
- last = &entry->next;
- }
-
- entry = kzalloc(sizeof(struct intc_virq_list), GFP_ATOMIC);
- if (!entry)
- return -ENOMEM;
-
- entry->irq = virq;
-
- if (last)
- *last = entry;
- else
- irq_set_handler_data(irq, entry);
-
- return 0;
-}
-
-static void intc_virq_handler(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- struct intc_virq_list *entry, *vlist = irq_data_get_irq_handler_data(data);
- struct intc_desc_int *d = get_intc_desc(irq);
-
- chip->irq_mask_ack(data);
-
- for_each_virq(entry, vlist) {
- unsigned long addr, handle;
- struct irq_desc *vdesc = irq_to_desc(entry->irq);
-
- if (vdesc) {
- handle = (unsigned long)irq_desc_get_handler_data(vdesc);
- addr = INTC_REG(d, _INTC_ADDR_E(handle), 0);
- if (intc_reg_fns[_INTC_FN(handle)](addr, handle, 0))
- generic_handle_irq_desc(vdesc);
- }
- }
-
- chip->irq_unmask(data);
-}
-
-static unsigned long __init intc_subgroup_data(struct intc_subgroup *subgroup,
- struct intc_desc_int *d,
- unsigned int index)
-{
- unsigned int fn = REG_FN_TEST_BASE + (subgroup->reg_width >> 3) - 1;
-
- return _INTC_MK(fn, MODE_ENABLE_REG, intc_get_reg(d, subgroup->reg),
- 0, 1, (subgroup->reg_width - 1) - index);
-}
-
-static void __init intc_subgroup_init_one(struct intc_desc *desc,
- struct intc_desc_int *d,
- struct intc_subgroup *subgroup)
-{
- struct intc_map_entry *mapped;
- unsigned int pirq;
- unsigned long flags;
- int i;
-
- mapped = radix_tree_lookup(&d->tree, subgroup->parent_id);
- if (!mapped) {
- WARN_ON(1);
- return;
- }
-
- pirq = mapped - intc_irq_xlate;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
- for (i = 0; i < ARRAY_SIZE(subgroup->enum_ids); i++) {
- struct intc_subgroup_entry *entry;
- int err;
-
- if (!subgroup->enum_ids[i])
- continue;
-
- entry = kmalloc(sizeof(*entry), GFP_NOWAIT);
- if (!entry)
- break;
-
- entry->pirq = pirq;
- entry->enum_id = subgroup->enum_ids[i];
- entry->handle = intc_subgroup_data(subgroup, d, i);
-
- err = radix_tree_insert(&d->tree, entry->enum_id, entry);
- if (unlikely(err < 0))
- break;
-
- radix_tree_tag_set(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d)
-{
- int i;
-
- if (!desc->hw.subgroups)
- return;
-
- for (i = 0; i < desc->hw.nr_subgroups; i++)
- intc_subgroup_init_one(desc, d, desc->hw.subgroups + i);
-}
-
-static void __init intc_subgroup_map(struct intc_desc_int *d)
-{
- struct intc_subgroup_entry *entries[32];
- unsigned long flags;
- unsigned int nr_found;
- int i;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
-restart:
- nr_found = radix_tree_gang_lookup_tag_slot(&d->tree,
- (void ***)entries, 0, ARRAY_SIZE(entries),
- INTC_TAG_VIRQ_NEEDS_ALLOC);
-
- for (i = 0; i < nr_found; i++) {
- struct intc_subgroup_entry *entry;
- int irq;
-
- entry = radix_tree_deref_slot((void **)entries[i]);
- if (unlikely(!entry))
- continue;
- if (radix_tree_deref_retry(entry))
- goto restart;
-
- irq = irq_alloc_desc(numa_node_id());
- if (unlikely(irq < 0)) {
- pr_err("no more free IRQs, bailing..\n");
- break;
- }
-
- activate_irq(irq);
-
- pr_info("Setting up a chained VIRQ from %d -> %d\n",
- irq, entry->pirq);
-
- intc_irq_xlate_set(irq, entry->enum_id, d);
-
- irq_set_chip_and_handler_name(irq, irq_get_chip(entry->pirq),
- handle_simple_irq, "virq");
- irq_set_chip_data(irq, irq_get_chip_data(entry->pirq));
-
- irq_set_handler_data(irq, (void *)entry->handle);
-
- /*
- * Set the virtual IRQ as non-threadable.
- */
- irq_set_nothread(irq);
-
- /* Set handler data before installing the handler */
- add_virq_to_pirq(entry->pirq, irq);
- irq_set_chained_handler(entry->pirq, intc_virq_handler);
-
- radix_tree_tag_clear(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- radix_tree_replace_slot(&d->tree, (void **)entries[i],
- &intc_irq_xlate[irq]);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_finalize(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list)
- if (radix_tree_tagged(&d->tree, INTC_TAG_VIRQ_NEEDS_ALLOC))
- intc_subgroup_map(d);
-}
diff --git a/drivers/sh/maple/Makefile b/drivers/sh/maple/Makefile
deleted file mode 100644
index c3a80910c212ce..00000000000000
--- a/drivers/sh/maple/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for Maple Bus
-
-obj-$(CONFIG_MAPLE) := maple.o
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
deleted file mode 100644
index e24e220e56eea1..00000000000000
--- a/drivers/sh/maple/maple.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * Core maple bus functionality
- *
- * Copyright (C) 2007 - 2009 Adrian McMenamin
- * Copyright (C) 2001 - 2008 Paul Mundt
- * Copyright (C) 2000 - 2001 YAEGASHI Takeshi
- * Copyright (C) 2001 M. R. Brown
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/maple.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <mach/dma.h>
-#include <mach/sysasic.h>
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
-MODULE_LICENSE("GPL v2");
-
-static void maple_dma_handler(struct work_struct *work);
-static void maple_vblank_handler(struct work_struct *work);
-
-static DECLARE_WORK(maple_dma_process, maple_dma_handler);
-static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
-
-static LIST_HEAD(maple_waitq);
-static LIST_HEAD(maple_sentq);
-
-/* mutex to protect queue of waiting packets */
-static DEFINE_MUTEX(maple_wlist_lock);
-
-static struct maple_driver maple_unsupported_device;
-static struct device maple_bus;
-static int subdevice_map[MAPLE_PORTS];
-static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
-static unsigned long maple_pnp_time;
-static int started, scanning, fullscan;
-static struct kmem_cache *maple_queue_cache;
-
-struct maple_device_specify {
- int port;
- int unit;
-};
-
-static bool checked[MAPLE_PORTS];
-static bool empty[MAPLE_PORTS];
-static struct maple_device *baseunits[MAPLE_PORTS];
-
-/**
- * maple_driver_register - register a maple driver
- * @drv: maple driver to be registered.
- *
- * Registers the passed in @drv, while updating the bus type.
- * Devices with matching function IDs will be automatically probed.
- */
-int maple_driver_register(struct maple_driver *drv)
-{
- if (!drv)
- return -EINVAL;
-
- drv->drv.bus = &maple_bus_type;
-
- return driver_register(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_register);
-
-/**
- * maple_driver_unregister - unregister a maple driver.
- * @drv: maple driver to unregister.
- *
- * Cleans up after maple_driver_register(). To be invoked in the exit
- * path of any module drivers.
- */
-void maple_driver_unregister(struct maple_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_unregister);
-
-/* set hardware registers to enable next round of dma */
-static void maple_dma_reset(void)
-{
- __raw_writel(MAPLE_MAGIC, MAPLE_RESET);
- /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */
- __raw_writel(1, MAPLE_TRIGTYPE);
- /*
- * Maple system register
- * bits 31 - 16 timeout in units of 20nsec
- * bit 12 hard trigger - set 0 to keep responding to VBLANK
- * bits 9 - 8 set 00 for 2 Mbps, 01 for 1 Mbps
- * bits 3 - 0 delay (in 1.3ms) between VBLANK and start of DMA
- * max delay is 11
- */
- __raw_writel(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED);
- __raw_writel(virt_to_phys(maple_sendbuf), MAPLE_DMAADDR);
- __raw_writel(1, MAPLE_ENABLE);
-}
-
-/**
- * maple_getcond_callback - setup handling MAPLE_COMMAND_GETCOND
- * @dev: device responding
- * @callback: handler callback
- * @interval: interval in jiffies between callbacks
- * @function: the function code for the device
- */
-void maple_getcond_callback(struct maple_device *dev,
- void (*callback) (struct mapleq *mq),
- unsigned long interval, unsigned long function)
-{
- dev->callback = callback;
- dev->interval = interval;
- dev->function = cpu_to_be32(function);
- dev->when = jiffies;
-}
-EXPORT_SYMBOL_GPL(maple_getcond_callback);
-
-static int maple_dma_done(void)
-{
- return (__raw_readl(MAPLE_STATE) & 1) == 0;
-}
-
-static void maple_release_device(struct device *dev)
-{
- struct maple_device *mdev;
- struct mapleq *mq;
-
- mdev = to_maple_dev(dev);
- mq = mdev->mq;
- kmem_cache_free(maple_queue_cache, mq->recvbuf);
- kfree(mq);
- kfree(mdev);
-}
-
-/**
- * maple_add_packet - add a single instruction to the maple bus queue
- * @mdev: maple device
- * @function: function on device being queried
- * @command: maple command to add
- * @length: length of command string (in 32 bit words)
- * @data: remainder of command string
- */
-int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
- size_t length, void *data)
-{
- int ret = 0;
- void *sendbuf = NULL;
-
- if (length) {
- sendbuf = kcalloc(length, 4, GFP_KERNEL);
- if (!sendbuf) {
- ret = -ENOMEM;
- goto out;
- }
- ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
- }
-
- mdev->mq->command = command;
- mdev->mq->length = length;
- if (length > 1)
- memcpy(sendbuf + 4, data, (length - 1) * 4);
- mdev->mq->sendbuf = sendbuf;
-
- mutex_lock(&maple_wlist_lock);
- list_add_tail(&mdev->mq->list, &maple_waitq);
- mutex_unlock(&maple_wlist_lock);
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(maple_add_packet);
-
-static struct mapleq *maple_allocq(struct maple_device *mdev)
-{
- struct mapleq *mq;
-
- mq = kzalloc(sizeof(*mq), GFP_KERNEL);
- if (!mq)
- goto failed_nomem;
-
- INIT_LIST_HEAD(&mq->list);
- mq->dev = mdev;
- mq->recvbuf = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
- if (!mq->recvbuf)
- goto failed_p2;
- mq->recvbuf->buf = &((mq->recvbuf->bufx)[0]);
-
- return mq;
-
-failed_p2:
- kfree(mq);
-failed_nomem:
- dev_err(&mdev->dev, "could not allocate memory for device (%d, %d)\n",
- mdev->port, mdev->unit);
- return NULL;
-}
-
-static struct maple_device *maple_alloc_dev(int port, int unit)
-{
- struct maple_device *mdev;
-
- /* zero this out to avoid kobj subsystem
- * thinking it has already been registered */
-
- mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
- if (!mdev)
- return NULL;
-
- mdev->port = port;
- mdev->unit = unit;
-
- mdev->mq = maple_allocq(mdev);
-
- if (!mdev->mq) {
- kfree(mdev);
- return NULL;
- }
- mdev->dev.bus = &maple_bus_type;
- mdev->dev.parent = &maple_bus;
- init_waitqueue_head(&mdev->maple_wait);
- return mdev;
-}
-
-static void maple_free_dev(struct maple_device *mdev)
-{
- kmem_cache_free(maple_queue_cache, mdev->mq->recvbuf);
- kfree(mdev->mq);
- kfree(mdev);
-}
-
-/* process the command queue into a maple command block
- * terminating command has bit 32 of first long set to 0
- */
-static void maple_build_block(struct mapleq *mq)
-{
- int port, unit, from, to, len;
- unsigned long *lsendbuf = mq->sendbuf;
-
- port = mq->dev->port & 3;
- unit = mq->dev->unit;
- len = mq->length;
- from = port << 6;
- to = (port << 6) | (unit > 0 ? (1 << (unit - 1)) & 0x1f : 0x20);
-
- *maple_lastptr &= 0x7fffffff;
- maple_lastptr = maple_sendptr;
-
- *maple_sendptr++ = (port << 16) | len | 0x80000000;
- *maple_sendptr++ = virt_to_phys(mq->recvbuf->buf);
- *maple_sendptr++ =
- mq->command | (to << 8) | (from << 16) | (len << 24);
- while (len-- > 0)
- *maple_sendptr++ = *lsendbuf++;
-}
-
-/* build up command queue */
-static void maple_send(void)
-{
- int i, maple_packets = 0;
- struct mapleq *mq, *nmq;
-
- if (!maple_dma_done())
- return;
-
- /* disable DMA */
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- mutex_lock(&maple_wlist_lock);
- if (list_empty(&maple_waitq)) {
- mutex_unlock(&maple_wlist_lock);
- goto finish;
- }
-
- maple_lastptr = maple_sendbuf;
- maple_sendptr = maple_sendbuf;
-
- list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
- maple_build_block(mq);
- list_del_init(&mq->list);
- list_add_tail(&mq->list, &maple_sentq);
- if (maple_packets++ > MAPLE_MAXPACKETS)
- break;
- }
- mutex_unlock(&maple_wlist_lock);
- if (maple_packets > 0) {
- for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
- __flush_purge_region(maple_sendbuf + i * PAGE_SIZE,
- PAGE_SIZE);
- }
-
-finish:
- maple_dma_reset();
-}
-
-/* check if there is a driver registered likely to match this device */
-static int maple_check_matching_driver(struct device_driver *driver,
- void *devptr)
-{
- struct maple_driver *maple_drv;
- struct maple_device *mdev;
-
- mdev = devptr;
- maple_drv = to_maple_driver(driver);
- if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static void maple_detach_driver(struct maple_device *mdev)
-{
- device_unregister(&mdev->dev);
-}
-
-/* process initial MAPLE_COMMAND_DEVINFO for each device or port */
-static void maple_attach_driver(struct maple_device *mdev)
-{
- char *p, *recvbuf;
- unsigned long function;
- int matched, error;
-
- recvbuf = mdev->mq->recvbuf->buf;
- /* copy the data as individual elements in
- * case of memory optimisation */
- memcpy(&mdev->devinfo.function, recvbuf + 4, 4);
- memcpy(&mdev->devinfo.function_data[0], recvbuf + 8, 12);
- memcpy(&mdev->devinfo.area_code, recvbuf + 20, 1);
- memcpy(&mdev->devinfo.connector_direction, recvbuf + 21, 1);
- memcpy(&mdev->devinfo.product_name[0], recvbuf + 22, 30);
- memcpy(&mdev->devinfo.standby_power, recvbuf + 112, 2);
- memcpy(&mdev->devinfo.max_power, recvbuf + 114, 2);
- memcpy(mdev->product_name, mdev->devinfo.product_name, 30);
- mdev->product_name[30] = '\0';
- memcpy(mdev->product_licence, mdev->devinfo.product_licence, 60);
- mdev->product_licence[60] = '\0';
-
- for (p = mdev->product_name + 29; mdev->product_name <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
- for (p = mdev->product_licence + 59; mdev->product_licence <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
-
- function = be32_to_cpu(mdev->devinfo.function);
-
- dev_info(&mdev->dev, "detected %s: function 0x%lX: at (%d, %d)\n",
- mdev->product_name, function, mdev->port, mdev->unit);
-
- if (function > 0x200) {
- /* Do this silently - as not a real device */
- function = 0;
- mdev->driver = &maple_unsupported_device;
- dev_set_name(&mdev->dev, "%d:0.port", mdev->port);
- } else {
- matched =
- bus_for_each_drv(&maple_bus_type, NULL, mdev,
- maple_check_matching_driver);
-
- if (matched == 0) {
- /* Driver does not exist yet */
- dev_info(&mdev->dev, "no driver found\n");
- mdev->driver = &maple_unsupported_device;
- }
- dev_set_name(&mdev->dev, "%d:0%d.%lX", mdev->port,
- mdev->unit, function);
- }
-
- mdev->function = function;
- mdev->dev.release = &maple_release_device;
-
- atomic_set(&mdev->busy, 0);
- error = device_register(&mdev->dev);
- if (error) {
- dev_warn(&mdev->dev, "could not register device at"
- " (%d, %d), with error 0x%X\n", mdev->unit,
- mdev->port, error);
- maple_free_dev(mdev);
- mdev = NULL;
- return;
- }
-}
-
-/*
- * if device has been registered for the given
- * port and unit then return 1 - allows identification
- * of which devices need to be attached or detached
- */
-static int check_maple_device(struct device *device, void *portptr)
-{
- struct maple_device_specify *ds;
- struct maple_device *mdev;
-
- ds = portptr;
- mdev = to_maple_dev(device);
- if (mdev->port == ds->port && mdev->unit == ds->unit)
- return 1;
- return 0;
-}
-
-static int setup_maple_commands(struct device *device, void *ignored)
-{
- int add;
- struct maple_device *mdev = to_maple_dev(device);
- if (mdev->interval > 0 && atomic_read(&mdev->busy) == 0 &&
- time_after(jiffies, mdev->when)) {
- /* bounce if we cannot add */
- add = maple_add_packet(mdev,
- be32_to_cpu(mdev->devinfo.function),
- MAPLE_COMMAND_GETCOND, 1, NULL);
- if (!add)
- mdev->when = jiffies + mdev->interval;
- } else {
- if (time_after(jiffies, maple_pnp_time))
- /* Ensure we don't have block reads and devinfo
- * calls interfering with one another - so flag the
- * device as busy */
- if (atomic_read(&mdev->busy) == 0) {
- atomic_set(&mdev->busy, 1);
- maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- }
- }
- return 0;
-}
-
-/* VBLANK bottom half - implemented via workqueue */
-static void maple_vblank_handler(struct work_struct *work)
-{
- int x, locking;
- struct maple_device *mdev;
-
- if (!maple_dma_done())
- return;
-
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- /*
- * Set up essential commands - to fetch data and
- * check devices are still present
- */
- bus_for_each_dev(&maple_bus_type, NULL, NULL,
- setup_maple_commands);
-
- if (time_after(jiffies, maple_pnp_time)) {
- /*
- * Scan the empty ports - bus is flakey and may have
- * mis-reported emptyness
- */
- for (x = 0; x < MAPLE_PORTS; x++) {
- if (checked[x] && empty[x]) {
- mdev = baseunits[x];
- if (!mdev)
- break;
- atomic_set(&mdev->busy, 1);
- locking = maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- if (!locking)
- break;
- }
- }
-
- maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
- }
-
-finish:
- maple_send();
-}
-
-/* handle devices added via hotplugs - placing them on queue for DEVINFO */
-static void maple_map_subunits(struct maple_device *mdev, int submask)
-{
- int retval, k, devcheck;
- struct maple_device *mdev_add;
- struct maple_device_specify ds;
-
- ds.port = mdev->port;
- for (k = 0; k < 5; k++) {
- ds.unit = k + 1;
- retval =
- bus_for_each_dev(&maple_bus_type, NULL, &ds,
- check_maple_device);
- if (retval) {
- submask = submask >> 1;
- continue;
- }
- devcheck = submask & 0x01;
- if (devcheck) {
- mdev_add = maple_alloc_dev(mdev->port, k + 1);
- if (!mdev_add)
- return;
- atomic_set(&mdev_add->busy, 1);
- maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- /* mark that we are checking sub devices */
- scanning = 1;
- }
- submask = submask >> 1;
- }
-}
-
-/* mark a device as removed */
-static void maple_clean_submap(struct maple_device *mdev)
-{
- int killbit;
-
- killbit = (mdev->unit > 0 ? (1 << (mdev->unit - 1)) & 0x1f : 0x20);
- killbit = ~killbit;
- killbit &= 0xFF;
- subdevice_map[mdev->port] = subdevice_map[mdev->port] & killbit;
-}
-
-/* handle empty port or hotplug removal */
-static void maple_response_none(struct maple_device *mdev)
-{
- maple_clean_submap(mdev);
-
- if (likely(mdev->unit != 0)) {
- /*
- * Block devices play up
- * and give the impression they have
- * been removed even when still in place or
- * trip the mtd layer when they have
- * really gone - this code traps that eventuality
- * and ensures we aren't overloaded with useless
- * error messages
- */
- if (mdev->can_unload) {
- if (!mdev->can_unload(mdev)) {
- atomic_set(&mdev->busy, 2);
- wake_up(&mdev->maple_wait);
- return;
- }
- }
-
- dev_info(&mdev->dev, "detaching device at (%d, %d)\n",
- mdev->port, mdev->unit);
- maple_detach_driver(mdev);
- return;
- } else {
- if (!started || !fullscan) {
- if (checked[mdev->port] == false) {
- checked[mdev->port] = true;
- empty[mdev->port] = true;
- dev_info(&mdev->dev, "no devices"
- " to port %d\n", mdev->port);
- }
- return;
- }
- }
- /* Some hardware devices generate false detach messages on unit 0 */
- atomic_set(&mdev->busy, 0);
-}
-
-/* preprocess hotplugs or scans */
-static void maple_response_devinfo(struct maple_device *mdev,
- char *recvbuf)
-{
- char submask;
- if (!started || (scanning == 2) || !fullscan) {
- if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
- checked[mdev->port] = true;
- maple_attach_driver(mdev);
- } else {
- if (mdev->unit != 0)
- maple_attach_driver(mdev);
- if (mdev->unit == 0) {
- empty[mdev->port] = false;
- maple_attach_driver(mdev);
- }
- }
- }
- if (mdev->unit == 0) {
- submask = recvbuf[2] & 0x1F;
- if (submask ^ subdevice_map[mdev->port]) {
- maple_map_subunits(mdev, submask);
- subdevice_map[mdev->port] = submask;
- }
- }
-}
-
-static void maple_response_fileerr(struct maple_device *mdev, void *recvbuf)
-{
- if (mdev->fileerr_handler) {
- mdev->fileerr_handler(mdev, recvbuf);
- return;
- } else
- dev_warn(&mdev->dev, "device at (%d, %d) reports"
- "file error 0x%X\n", mdev->port, mdev->unit,
- ((int *)recvbuf)[1]);
-}
-
-static void maple_port_rescan(void)
-{
- int i;
- struct maple_device *mdev;
-
- fullscan = 1;
- for (i = 0; i < MAPLE_PORTS; i++) {
- if (checked[i] == false) {
- fullscan = 0;
- mdev = baseunits[i];
- maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- }
- }
-}
-
-/* maple dma end bottom half - implemented via workqueue */
-static void maple_dma_handler(struct work_struct *work)
-{
- struct mapleq *mq, *nmq;
- struct maple_device *mdev;
- char *recvbuf;
- enum maple_code code;
-
- if (!maple_dma_done())
- return;
- __raw_writel(0, MAPLE_ENABLE);
- if (!list_empty(&maple_sentq)) {
- list_for_each_entry_safe(mq, nmq, &maple_sentq, list) {
- mdev = mq->dev;
- recvbuf = mq->recvbuf->buf;
- __flush_invalidate_region(sh_cacheop_vaddr(recvbuf),
- 0x400);
- code = recvbuf[0];
- kfree(mq->sendbuf);
- list_del_init(&mq->list);
- switch (code) {
- case MAPLE_RESPONSE_NONE:
- maple_response_none(mdev);
- break;
-
- case MAPLE_RESPONSE_DEVINFO:
- maple_response_devinfo(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_DATATRF:
- if (mdev->callback)
- mdev->callback(mq);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_FILEERR:
- maple_response_fileerr(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_AGAIN:
- case MAPLE_RESPONSE_BADCMD:
- case MAPLE_RESPONSE_BADFUNC:
- dev_warn(&mdev->dev, "non-fatal error"
- " 0x%X at (%d, %d)\n", code,
- mdev->port, mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_ALLINFO:
- dev_notice(&mdev->dev, "extended"
- " device information request for (%d, %d)"
- " but call is not supported\n", mdev->port,
- mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_OK:
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- default:
- break;
- }
- }
- /* if scanning is 1 then we have subdevices to check */
- if (scanning == 1) {
- maple_send();
- scanning = 2;
- } else
- scanning = 0;
- /*check if we have actually tested all ports yet */
- if (!fullscan)
- maple_port_rescan();
- /* mark that we have been through the first scan */
- started = 1;
- }
- maple_send();
-}
-
-static irqreturn_t maple_dma_interrupt(int irq, void *dev_id)
-{
- /* Load everything into the bottom half */
- schedule_work(&maple_dma_process);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t maple_vblank_interrupt(int irq, void *dev_id)
-{
- schedule_work(&maple_vblank_process);
- return IRQ_HANDLED;
-}
-
-static int maple_set_dma_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_MAPLE_DMA, maple_dma_interrupt,
- IRQF_SHARED, "maple bus DMA", &maple_unsupported_device);
-}
-
-static int maple_set_vblank_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_VSYNC, maple_vblank_interrupt,
- IRQF_SHARED, "maple bus VBLANK", &maple_unsupported_device);
-}
-
-static int maple_get_dma_buffer(void)
-{
- maple_sendbuf =
- (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
- MAPLE_DMA_PAGES);
- if (!maple_sendbuf)
- return -ENOMEM;
- return 0;
-}
-
-static int maple_match_bus_driver(struct device *devptr,
- struct device_driver *drvptr)
-{
- struct maple_driver *maple_drv = to_maple_driver(drvptr);
- struct maple_device *maple_dev = to_maple_dev(devptr);
-
- /* Trap empty port case */
- if (maple_dev->devinfo.function == 0xFFFFFFFF)
- return 0;
- else if (maple_dev->devinfo.function &
- cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static int maple_bus_uevent(struct device *dev,
- struct kobj_uevent_env *env)
-{
- return 0;
-}
-
-static void maple_bus_release(struct device *dev)
-{
-}
-
-static struct maple_driver maple_unsupported_device = {
- .drv = {
- .name = "maple_unsupported_device",
- .bus = &maple_bus_type,
- },
-};
-/*
- * maple_bus_type - core maple bus structure
- */
-struct bus_type maple_bus_type = {
- .name = "maple",
- .match = maple_match_bus_driver,
- .uevent = maple_bus_uevent,
-};
-EXPORT_SYMBOL_GPL(maple_bus_type);
-
-static struct device maple_bus = {
- .init_name = "maple",
- .release = maple_bus_release,
-};
-
-static int __init maple_bus_init(void)
-{
- int retval, i;
- struct maple_device *mdev[MAPLE_PORTS];
-
- __raw_writel(0, MAPLE_ENABLE);
-
- retval = device_register(&maple_bus);
- if (retval)
- goto cleanup;
-
- retval = bus_register(&maple_bus_type);
- if (retval)
- goto cleanup_device;
-
- retval = driver_register(&maple_unsupported_device.drv);
- if (retval)
- goto cleanup_bus;
-
- /* allocate memory for maple bus dma */
- retval = maple_get_dma_buffer();
- if (retval) {
- dev_err(&maple_bus, "failed to allocate DMA buffers\n");
- goto cleanup_basic;
- }
-
- /* set up DMA interrupt handler */
- retval = maple_set_dma_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab maple "
- "DMA IRQ\n");
- goto cleanup_dma;
- }
-
- /* set up VBLANK interrupt handler */
- retval = maple_set_vblank_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab VBLANK IRQ\n");
- goto cleanup_irq;
- }
-
- maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
-
- if (!maple_queue_cache) {
- retval = -ENOMEM;
- goto cleanup_bothirqs;
- }
-
- INIT_LIST_HEAD(&maple_waitq);
- INIT_LIST_HEAD(&maple_sentq);
-
- /* setup maple ports */
- for (i = 0; i < MAPLE_PORTS; i++) {
- checked[i] = false;
- empty[i] = false;
- mdev[i] = maple_alloc_dev(i, 0);
- if (!mdev[i]) {
- while (i-- > 0)
- maple_free_dev(mdev[i]);
- retval = -ENOMEM;
- goto cleanup_cache;
- }
- baseunits[i] = mdev[i];
- atomic_set(&mdev[i]->busy, 1);
- maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
- subdevice_map[i] = 0;
- }
-
- maple_pnp_time = jiffies + HZ;
- /* prepare initial queue */
- maple_send();
- dev_info(&maple_bus, "bus core now registered\n");
-
- return 0;
-
-cleanup_cache:
- kmem_cache_destroy(maple_queue_cache);
-
-cleanup_bothirqs:
- free_irq(HW_EVENT_VSYNC, 0);
-
-cleanup_irq:
- free_irq(HW_EVENT_MAPLE_DMA, 0);
-
-cleanup_dma:
- free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES);
-
-cleanup_basic:
- driver_unregister(&maple_unsupported_device.drv);
-
-cleanup_bus:
- bus_unregister(&maple_bus_type);
-
-cleanup_device:
- device_unregister(&maple_bus);
-
-cleanup:
- printk(KERN_ERR "Maple bus registration failed\n");
- return retval;
-}
-/* Push init to later to ensure hardware gets detected */
-fs_initcall(maple_bus_init);
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
deleted file mode 100644
index c887ecdaf19b7c..00000000000000
--- a/drivers/sh/pm_runtime.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Runtime PM support code
- *
- * Copyright (C) 2009-2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-
-static struct dev_pm_domain default_pm_domain = {
- .ops = {
- USE_PM_CLK_RUNTIME_OPS
- USE_PLATFORM_PM_SLEEP_OPS
- },
-};
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
- .pm_domain = &default_pm_domain,
- .con_ids = { NULL, },
-};
-
-static int __init sh_pm_runtime_init(void)
-{
- pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
- return 0;
-}
-core_initcall(sh_pm_runtime_init);
diff --git a/drivers/sh/superhyway/Makefile b/drivers/sh/superhyway/Makefile
deleted file mode 100644
index 6dfa41f160af6b..00000000000000
--- a/drivers/sh/superhyway/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the SuperHyway bus drivers.
-#
-
-obj-$(CONFIG_SUPERHYWAY) += superhyway.o
-obj-$(CONFIG_SYSFS) += superhyway-sysfs.o
-
diff --git a/drivers/sh/superhyway/superhyway-sysfs.c b/drivers/sh/superhyway/superhyway-sysfs.c
deleted file mode 100644
index 774f31b564f8f8..00000000000000
--- a/drivers/sh/superhyway/superhyway-sysfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway-sysfs.c
- *
- * SuperHyway Bus sysfs interface
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/superhyway.h>
-
-#define superhyway_ro_attr(name, fmt, field) \
-static ssize_t name##_show(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct superhyway_device *s = to_superhyway_device(dev); \
- return sprintf(buf, fmt, s->field); \
-} \
-static DEVICE_ATTR_RO(name);
-
-/* VCR flags */
-superhyway_ro_attr(perr_flags, "0x%02x\n", vcr.perr_flags);
-superhyway_ro_attr(merr_flags, "0x%02x\n", vcr.merr_flags);
-superhyway_ro_attr(mod_vers, "0x%04x\n", vcr.mod_vers);
-superhyway_ro_attr(mod_id, "0x%04x\n", vcr.mod_id);
-superhyway_ro_attr(bot_mb, "0x%02x\n", vcr.bot_mb);
-superhyway_ro_attr(top_mb, "0x%02x\n", vcr.top_mb);
-
-/* Misc */
-superhyway_ro_attr(resource, "0x%08lx\n", resource[0].start);
-
-static struct attribute *superhyway_dev_attrs[] = {
- &dev_attr_perr_flags.attr,
- &dev_attr_merr_flags.attr,
- &dev_attr_mod_vers.attr,
- &dev_attr_mod_id.attr,
- &dev_attr_bot_mb.attr,
- &dev_attr_top_mb.attr,
- &dev_attr_resource.attr,
- NULL,
-};
-
-static const struct attribute_group superhyway_dev_group = {
- .attrs = superhyway_dev_attrs,
-};
-
-const struct attribute_group *superhyway_dev_groups[] = {
- &superhyway_dev_group,
- NULL,
-};
diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c
deleted file mode 100644
index 44324abe21dada..00000000000000
--- a/drivers/sh/superhyway/superhyway.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway.c
- *
- * SuperHyway Bus Driver
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-static int superhyway_devices;
-
-static struct device superhyway_bus_device = {
- .init_name = "superhyway",
-};
-
-static void superhyway_device_release(struct device *dev)
-{
- struct superhyway_device *sdev = to_superhyway_device(dev);
-
- kfree(sdev->resource);
- kfree(sdev);
-}
-
-/**
- * superhyway_add_device - Add a SuperHyway module
- * @base: Physical address where module is mapped.
- * @sdev: SuperHyway device to add, or NULL to allocate a new one.
- * @bus: Bus where SuperHyway module resides.
- *
- * This is responsible for adding a new SuperHyway module. This sets up a new
- * struct superhyway_device for the module being added if @sdev == NULL.
- *
- * Devices are initially added in the order that they are scanned (from the
- * top-down of the memory map), and are assigned an ID based on the order that
- * they are added. Any manual addition of a module will thus get the ID after
- * the devices already discovered regardless of where it resides in memory.
- *
- * Further work can and should be done in superhyway_scan_bus(), to be sure
- * that any new modules are properly discovered and subsequently registered.
- */
-int superhyway_add_device(unsigned long base, struct superhyway_device *sdev,
- struct superhyway_bus *bus)
-{
- struct superhyway_device *dev = sdev;
-
- if (!dev) {
- dev = kzalloc(sizeof(struct superhyway_device), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- }
-
- dev->bus = bus;
- superhyway_read_vcr(dev, base, &dev->vcr);
-
- if (!dev->resource) {
- dev->resource = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!dev->resource) {
- kfree(dev);
- return -ENOMEM;
- }
-
- dev->resource->name = dev->name;
- dev->resource->start = base;
- dev->resource->end = dev->resource->start + 0x01000000;
- }
-
- dev->dev.parent = &superhyway_bus_device;
- dev->dev.bus = &superhyway_bus_type;
- dev->dev.release = superhyway_device_release;
- dev->id.id = dev->vcr.mod_id;
-
- sprintf(dev->name, "SuperHyway device %04x", dev->id.id);
- dev_set_name(&dev->dev, "%02x", superhyway_devices);
-
- superhyway_devices++;
-
- return device_register(&dev->dev);
-}
-
-int superhyway_add_devices(struct superhyway_bus *bus,
- struct superhyway_device **devices,
- int nr_devices)
-{
- int i, ret = 0;
-
- for (i = 0; i < nr_devices; i++) {
- struct superhyway_device *dev = devices[i];
- ret |= superhyway_add_device(dev->resource[0].start, dev, bus);
- }
-
- return ret;
-}
-
-static int __init superhyway_init(void)
-{
- struct superhyway_bus *bus;
- int ret;
-
- ret = device_register(&superhyway_bus_device);
- if (unlikely(ret))
- return ret;
-
- for (bus = superhyway_channels; bus->ops; bus++)
- ret |= superhyway_scan_bus(bus);
-
- return ret;
-}
-postcore_initcall(superhyway_init);
-
-static const struct superhyway_device_id *
-superhyway_match_id(const struct superhyway_device_id *ids,
- struct superhyway_device *dev)
-{
- while (ids->id) {
- if (ids->id == dev->id.id)
- return ids;
-
- ids++;
- }
-
- return NULL;
-}
-
-static int superhyway_device_probe(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv && shyway_drv->probe) {
- const struct superhyway_device_id *id;
-
- id = superhyway_match_id(shyway_drv->id_table, shyway_dev);
- if (id)
- return shyway_drv->probe(shyway_dev, id);
- }
-
- return -ENODEV;
-}
-
-static void superhyway_device_remove(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv->remove)
- shyway_drv->remove(shyway_dev);
-}
-
-/**
- * superhyway_register_driver - Register a new SuperHyway driver
- * @drv: SuperHyway driver to register.
- *
- * This registers the passed in @drv. Any devices matching the id table will
- * automatically be populated and handed off to the driver's specified probe
- * routine.
- */
-int superhyway_register_driver(struct superhyway_driver *drv)
-{
- drv->drv.name = drv->name;
- drv->drv.bus = &superhyway_bus_type;
-
- return driver_register(&drv->drv);
-}
-
-/**
- * superhyway_unregister_driver - Unregister a SuperHyway driver
- * @drv: SuperHyway driver to unregister.
- *
- * This cleans up after superhyway_register_driver(), and should be invoked in
- * the exit path of any module drivers.
- */
-void superhyway_unregister_driver(struct superhyway_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-
-static int superhyway_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(drv);
- const struct superhyway_device_id *ids = shyway_drv->id_table;
-
- if (!ids)
- return -EINVAL;
- if (superhyway_match_id(ids, shyway_dev))
- return 1;
-
- return -ENODEV;
-}
-
-struct bus_type superhyway_bus_type = {
- .name = "superhyway",
- .match = superhyway_bus_match,
-#ifdef CONFIG_SYSFS
- .dev_groups = superhyway_dev_groups,
-#endif
- .probe = superhyway_device_probe,
- .remove = superhyway_device_remove,
-};
-
-static int __init superhyway_bus_init(void)
-{
- return bus_register(&superhyway_bus_type);
-}
-
-static void __exit superhyway_bus_exit(void)
-{
- device_unregister(&superhyway_bus_device);
- bus_unregister(&superhyway_bus_type);
-}
-
-core_initcall(superhyway_bus_init);
-module_exit(superhyway_bus_exit);
-
-EXPORT_SYMBOL(superhyway_bus_type);
-EXPORT_SYMBOL(superhyway_add_device);
-EXPORT_SYMBOL(superhyway_add_devices);
-EXPORT_SYMBOL(superhyway_register_driver);
-EXPORT_SYMBOL(superhyway_unregister_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
deleted file mode 100644
index 7bed5be886c657..00000000000000
--- a/include/linux/sh_clk.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SH_CLOCK_H
-#define __SH_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-#include <linux/kref.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-struct clk;
-
-struct clk_mapping {
- phys_addr_t phys;
- void __iomem *base;
- unsigned long len;
- struct kref ref;
-};
-
-struct sh_clk_ops {
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- void (*init)(struct clk *clk);
-#endif
- int (*enable)(struct clk *clk);
- void (*disable)(struct clk *clk);
- unsigned long (*recalc)(struct clk *clk);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*set_parent)(struct clk *clk, struct clk *parent);
- long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1)
-#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4)
-#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6)
-
-struct clk {
- struct list_head node;
- struct clk *parent;
- struct clk **parent_table; /* list of parents to */
- unsigned short parent_num; /* choose between */
- unsigned char src_shift; /* source clock field in the */
- unsigned char src_width; /* configuration register */
- struct sh_clk_ops *ops;
-
- struct list_head children;
- struct list_head sibling; /* node for children */
-
- int usecount;
-
- unsigned long rate;
- unsigned long flags;
-
- void __iomem *enable_reg;
- void __iomem *status_reg;
- unsigned int enable_bit;
- void __iomem *mapped_reg;
-
- unsigned int div_mask;
- unsigned long arch_flags;
- void *priv;
- struct clk_mapping *mapping;
- struct cpufreq_frequency_table *freq_table;
- unsigned int nr_freqs;
-};
-
-#define CLK_ENABLE_ON_INIT BIT(0)
-
-#define CLK_ENABLE_REG_32BIT BIT(1) /* default access size */
-#define CLK_ENABLE_REG_16BIT BIT(2)
-#define CLK_ENABLE_REG_8BIT BIT(3)
-
-#define CLK_MASK_DIV_ON_DISABLE BIT(4)
-
-#define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \
- CLK_ENABLE_REG_16BIT | \
- CLK_ENABLE_REG_8BIT)
-
-/* drivers/sh/clk.c */
-unsigned long followparent_recalc(struct clk *);
-void recalculate_root_clocks(void);
-void propagate_rate(struct clk *);
-int clk_reparent(struct clk *child, struct clk *parent);
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-void clk_enable_init_clocks(void);
-
-struct clk_div_mult_table {
- unsigned int *divisors;
- unsigned int nr_divisors;
- unsigned int *multipliers;
- unsigned int nr_multipliers;
-};
-
-struct cpufreq_frequency_table;
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap);
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate);
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate);
-
-#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _status_reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_enable_reg, \
- .enable_bit = _enable_bit, \
- .status_reg = _status_reg, \
- .flags = _flags, \
-}
-
-#define SH_CLK_MSTP32(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP32_STS(_p, _r, _b, _s, _f) \
- SH_CLK_MSTP(_p, _r, _b, _s, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP16(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_16BIT)
-
-#define SH_CLK_MSTP8(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_8BIT)
-
-int sh_clk_mstp_register(struct clk *clks, int nr);
-
-/*
- * MSTP registration never really cared about access size, despite the
- * original enable/disable pairs assuming a 32-bit access. Clocks are
- * responsible for defining their access sizes either directly or via the
- * clock definition wrappers.
- */
-static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr)
-{
- return sh_clk_mstp_register(clks, nr);
-}
-
-#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = _shift, \
- .arch_flags = _div_bitmap, \
- .div_mask = SH_CLK_DIV4_MSK, \
- .flags = _flags, \
-}
-
-struct clk_div_table {
- struct clk_div_mult_table *div_mult_table;
- void (*kick)(struct clk *clk);
-};
-
-#define clk_div4_table clk_div_table
-
-int sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-
-#define SH_CLK_DIV6_EXT(_reg, _flags, _parents, \
- _num_parents, _src_shift, _src_width) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
- .div_mask = SH_CLK_DIV6_MSK, \
- .parent_table = _parents, \
- .parent_num = _num_parents, \
- .src_shift = _src_shift, \
- .src_width = _src_width, \
-}
-
-#define SH_CLK_DIV6(_parent, _reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .div_mask = SH_CLK_DIV6_MSK, \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
-}
-
-int sh_clk_div6_register(struct clk *clks, int nr);
-int sh_clk_div6_reparent_register(struct clk *clks, int nr);
-
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
-/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */
-#define SH_CLK_FSIDIV(_reg, _parent) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .parent = _parent, \
-}
-
-int sh_clk_fsidiv_register(struct clk *clks, int nr);
-
-#endif /* __SH_CLOCK_H */
diff --git a/include/linux/superhyway.h b/include/linux/superhyway.h
deleted file mode 100644
index 8d3376775813d3..00000000000000
--- a/include/linux/superhyway.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/linux/superhyway.h
- *
- * SuperHyway Bus definitions
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __LINUX_SUPERHYWAY_H
-#define __LINUX_SUPERHYWAY_H
-
-#include <linux/device.h>
-
-/*
- * SuperHyway IDs
- */
-#define SUPERHYWAY_DEVICE_ID_SH5_DMAC 0x0183
-
-struct superhyway_vcr_info {
- u8 perr_flags; /* P-port Error flags */
- u8 merr_flags; /* Module Error flags */
- u16 mod_vers; /* Module Version */
- u16 mod_id; /* Module ID */
- u8 bot_mb; /* Bottom Memory block */
- u8 top_mb; /* Top Memory block */
-};
-
-struct superhyway_ops {
- int (*read_vcr)(unsigned long base, struct superhyway_vcr_info *vcr);
- int (*write_vcr)(unsigned long base, struct superhyway_vcr_info vcr);
-};
-
-struct superhyway_bus {
- struct superhyway_ops *ops;
-};
-
-extern struct superhyway_bus superhyway_channels[];
-
-struct superhyway_device_id {
- unsigned int id;
- unsigned long driver_data;
-};
-
-struct superhyway_device;
-extern struct bus_type superhyway_bus_type;
-
-struct superhyway_driver {
- char *name;
-
- const struct superhyway_device_id *id_table;
- struct device_driver drv;
-
- int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
- void (*remove)(struct superhyway_device *dev);
-};
-
-#define to_superhyway_driver(d) container_of((d), struct superhyway_driver, drv)
-
-struct superhyway_device {
- char name[32];
-
- struct device dev;
-
- struct superhyway_device_id id;
- struct superhyway_driver *drv;
- struct superhyway_bus *bus;
-
- int num_resources;
- struct resource *resource;
- struct superhyway_vcr_info vcr;
-};
-
-#define to_superhyway_device(d) container_of((d), struct superhyway_device, dev)
-
-#define superhyway_get_drvdata(d) dev_get_drvdata(&(d)->dev)
-#define superhyway_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p))
-
-static inline int
-superhyway_read_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info *vcr)
-{
- return dev->bus->ops->read_vcr(base, vcr);
-}
-
-static inline int
-superhyway_write_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info vcr)
-{
- return dev->bus->ops->write_vcr(base, vcr);
-}
-
-extern int superhyway_scan_bus(struct superhyway_bus *);
-
-/* drivers/sh/superhyway/superhyway.c */
-int superhyway_register_driver(struct superhyway_driver *);
-void superhyway_unregister_driver(struct superhyway_driver *);
-int superhyway_add_device(unsigned long base, struct superhyway_device *, struct superhyway_bus *);
-int superhyway_add_devices(struct superhyway_bus *bus, struct superhyway_device **devices, int nr_devices);
-
-/* drivers/sh/superhyway/superhyway-sysfs.c */
-extern const struct attribute_group *superhyway_dev_groups[];
-
-#endif /* __LINUX_SUPERHYWAY_H */
-
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 14/22] remove drivers/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/Makefile | 1 -
drivers/sh/Kconfig | 6 -
drivers/sh/Makefile | 12 -
drivers/sh/clk/Makefile | 4 -
drivers/sh/clk/core.c | 624 ----------------
drivers/sh/clk/cpg.c | 477 ------------
drivers/sh/intc/Kconfig | 44 --
drivers/sh/intc/Makefile | 6 -
drivers/sh/intc/access.c | 246 -------
drivers/sh/intc/balancing.c | 97 ---
drivers/sh/intc/chip.c | 211 ------
drivers/sh/intc/core.c | 501 -------------
drivers/sh/intc/handle.c | 306 --------
drivers/sh/intc/internals.h | 191 -----
drivers/sh/intc/irqdomain.c | 68 --
drivers/sh/intc/userimask.c | 84 ---
drivers/sh/intc/virq-debugfs.c | 54 --
drivers/sh/intc/virq.c | 269 -------
drivers/sh/maple/Makefile | 4 -
drivers/sh/maple/maple.c | 895 -----------------------
drivers/sh/pm_runtime.c | 40 -
drivers/sh/superhyway/Makefile | 8 -
drivers/sh/superhyway/superhyway-sysfs.c | 54 --
drivers/sh/superhyway/superhyway.c | 234 ------
include/linux/sh_clk.h | 213 ------
include/linux/superhyway.h | 107 ---
26 files changed, 4756 deletions(-)
delete mode 100644 drivers/sh/Kconfig
delete mode 100644 drivers/sh/Makefile
delete mode 100644 drivers/sh/clk/Makefile
delete mode 100644 drivers/sh/clk/core.c
delete mode 100644 drivers/sh/clk/cpg.c
delete mode 100644 drivers/sh/intc/Kconfig
delete mode 100644 drivers/sh/intc/Makefile
delete mode 100644 drivers/sh/intc/access.c
delete mode 100644 drivers/sh/intc/balancing.c
delete mode 100644 drivers/sh/intc/chip.c
delete mode 100644 drivers/sh/intc/core.c
delete mode 100644 drivers/sh/intc/handle.c
delete mode 100644 drivers/sh/intc/internals.h
delete mode 100644 drivers/sh/intc/irqdomain.c
delete mode 100644 drivers/sh/intc/userimask.c
delete mode 100644 drivers/sh/intc/virq-debugfs.c
delete mode 100644 drivers/sh/intc/virq.c
delete mode 100644 drivers/sh/maple/Makefile
delete mode 100644 drivers/sh/maple/maple.c
delete mode 100644 drivers/sh/pm_runtime.c
delete mode 100644 drivers/sh/superhyway/Makefile
delete mode 100644 drivers/sh/superhyway/superhyway-sysfs.c
delete mode 100644 drivers/sh/superhyway/superhyway.c
delete mode 100644 include/linux/sh_clk.h
delete mode 100644 include/linux/superhyway.h
diff --git a/drivers/Makefile b/drivers/Makefile
index bdf1c66141c9bd..b97a69a4c40b91 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,7 +134,6 @@ obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
-obj-$(CONFIG_SUPERH) += sh/
obj-y += clocksource/
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
diff --git a/drivers/sh/Kconfig b/drivers/sh/Kconfig
deleted file mode 100644
index 3588fcc9c0d23b..00000000000000
--- a/drivers/sh/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "SuperH / SH-Mobile Driver Options"
-
-source "drivers/sh/intc/Kconfig"
-
-endmenu
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
deleted file mode 100644
index c53262835e85e2..00000000000000
--- a/drivers/sh/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH specific drivers.
-#
-obj-$(CONFIG_SH_INTC) += intc/
-ifneq ($(CONFIG_COMMON_CLK),y)
-obj-$(CONFIG_HAVE_CLK) += clk/
-endif
-obj-$(CONFIG_MAPLE) += maple/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-
-obj-y += pm_runtime.o
diff --git a/drivers/sh/clk/Makefile b/drivers/sh/clk/Makefile
deleted file mode 100644
index 0158ff3ba9d544..00000000000000
--- a/drivers/sh/clk/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := core.o
-
-obj-$(CONFIG_SH_CLK_CPG) += cpg.o
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
deleted file mode 100644
index d996782a710642..00000000000000
--- a/drivers/sh/clk/core.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * SuperH clock framework
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "clock: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/syscore_ops.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* clock disable operations are not passed on to hardware during boot */
-static int allow_disable;
-
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap)
-{
- unsigned long mult, div;
- unsigned long freq;
- int i;
-
- clk->nr_freqs = nr_freqs;
-
- for (i = 0; i < nr_freqs; i++) {
- div = 1;
- mult = 1;
-
- if (src_table->divisors && i < src_table->nr_divisors)
- div = src_table->divisors[i];
-
- if (src_table->multipliers && i < src_table->nr_multipliers)
- mult = src_table->multipliers[i];
-
- if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
- freq = CPUFREQ_ENTRY_INVALID;
- else
- freq = clk->parent->rate * mult / div;
-
- freq_table[i].driver_data = i;
- freq_table[i].frequency = freq;
- }
-
- /* Termination entry */
- freq_table[i].driver_data = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-}
-
-struct clk_rate_round_data;
-
-struct clk_rate_round_data {
- unsigned long rate;
- unsigned int min, max;
- long (*func)(unsigned int, struct clk_rate_round_data *);
- void *arg;
-};
-
-#define for_each_frequency(pos, r, freq) \
- for (pos = r->min, freq = r->func(pos, r); \
- pos <= r->max; pos++, freq = r->func(pos, r)) \
- if (unlikely(freq == 0)) \
- ; \
- else
-
-static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
-{
- unsigned long rate_error, rate_error_prev = ~0UL;
- unsigned long highest, lowest, freq;
- long rate_best_fit = -ENOENT;
- int i;
-
- highest = 0;
- lowest = ~0UL;
-
- for_each_frequency(i, rounder, freq) {
- if (freq > highest)
- highest = freq;
- if (freq < lowest)
- lowest = freq;
-
- rate_error = abs(freq - rounder->rate);
- if (rate_error < rate_error_prev) {
- rate_best_fit = freq;
- rate_error_prev = rate_error;
- }
-
- if (rate_error == 0)
- break;
- }
-
- if (rounder->rate >= highest)
- rate_best_fit = highest;
- if (rounder->rate <= lowest)
- rate_best_fit = lowest;
-
- return rate_best_fit;
-}
-
-static long clk_rate_table_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- struct cpufreq_frequency_table *freq_table = rounder->arg;
- unsigned long freq = freq_table[pos].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- freq = 0;
-
- return freq;
-}
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct clk_rate_round_data table_round = {
- .min = 0,
- .max = clk->nr_freqs - 1,
- .func = clk_rate_table_iter,
- .arg = freq_table,
- .rate = rate,
- };
-
- if (clk->nr_freqs < 1)
- return -ENOSYS;
-
- return clk_rate_round_helper(&table_round);
-}
-
-static long clk_rate_div_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) / pos;
-}
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate)
-{
- struct clk_rate_round_data div_range_round = {
- .min = div_min,
- .max = div_max,
- .func = clk_rate_div_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&div_range_round);
-}
-
-static long clk_rate_mult_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) * pos;
-}
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate)
-{
- struct clk_rate_round_data mult_range_round = {
- .min = mult_min,
- .max = mult_max,
- .func = clk_rate_mult_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&mult_range_round);
-}
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct cpufreq_frequency_table *pos;
- int idx;
-
- cpufreq_for_each_valid_entry_idx(pos, freq_table, idx)
- if (pos->frequency == rate)
- return idx;
-
- return -ENOENT;
-}
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent ? clk->parent->rate : 0;
-}
-
-int clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- return 0;
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
-
- propagate_rate(clkp);
- }
-}
-
-static void __clk_disable(struct clk *clk)
-{
- if (WARN(!clk->usecount, "Trying to disable clock %p with 0 usecount\n",
- clk))
- return;
-
- if (!(--clk->usecount)) {
- if (likely(allow_disable && clk->ops && clk->ops->disable))
- clk->ops->disable(clk);
- if (likely(clk->parent))
- __clk_disable(clk->parent);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (!clk)
- return;
-
- spin_lock_irqsave(&clock_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount++ == 0) {
- if (clk->parent) {
- ret = __clk_enable(clk->parent);
- if (unlikely(ret))
- goto err;
- }
-
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->parent)
- __clk_disable(clk->parent);
- goto err;
- }
- }
- }
-
- return ret;
-err:
- clk->usecount--;
- return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (!clk)
- return -EINVAL;
-
- spin_lock_irqsave(&clock_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static struct clk_mapping dummy_mapping;
-
-static struct clk *lookup_root_clock(struct clk *clk)
-{
- while (clk->parent)
- clk = clk->parent;
-
- return clk;
-}
-
-static int clk_establish_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /*
- * Propagate mappings.
- */
- if (!mapping) {
- struct clk *clkp;
-
- /*
- * dummy mapping for root clocks with no specified ranges
- */
- if (!clk->parent) {
- clk->mapping = &dummy_mapping;
- goto out;
- }
-
- /*
- * If we're on a child clock and it provides no mapping of its
- * own, inherit the mapping from its root clock.
- */
- clkp = lookup_root_clock(clk);
- mapping = clkp->mapping;
- BUG_ON(!mapping);
- }
-
- /*
- * Establish initial mapping.
- */
- if (!mapping->base && mapping->phys) {
- kref_init(&mapping->ref);
-
- mapping->base = ioremap(mapping->phys, mapping->len);
- if (unlikely(!mapping->base))
- return -ENXIO;
- } else if (mapping->base) {
- /*
- * Bump the refcount for an existing mapping
- */
- kref_get(&mapping->ref);
- }
-
- clk->mapping = mapping;
-out:
- clk->mapped_reg = clk->mapping->base;
- clk->mapped_reg += (phys_addr_t)clk->enable_reg - clk->mapping->phys;
- return 0;
-}
-
-static void clk_destroy_mapping(struct kref *kref)
-{
- struct clk_mapping *mapping;
-
- mapping = container_of(kref, struct clk_mapping, ref);
-
- iounmap(mapping->base);
-}
-
-static void clk_teardown_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /* Nothing to do */
- if (mapping == &dummy_mapping)
- goto out;
-
- kref_put(&mapping->ref, clk_destroy_mapping);
- clk->mapping = NULL;
-out:
- clk->mapped_reg = NULL;
-}
-
-int clk_register(struct clk *clk)
-{
- int ret;
-
- if (IS_ERR_OR_NULL(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clock_list_sem);
-
- INIT_LIST_HEAD(&clk->children);
- clk->usecount = 0;
-
- ret = clk_establish_mapping(clk);
- if (unlikely(ret))
- goto out_unlock;
-
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clock_list);
-
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- if (clk->ops && clk->ops->init)
- clk->ops->init(clk);
-#endif
-
-out_unlock:
- mutex_unlock(&clock_list_sem);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- mutex_lock(&clock_list_sem);
- list_del(&clk->sibling);
- list_del(&clk->node);
- clk_teardown_mapping(clk);
- mutex_unlock(&clock_list_sem);
-}
-EXPORT_SYMBOL_GPL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node)
- if (clkp->flags & CLK_ENABLE_ON_INIT)
- clk_enable(clkp);
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0;
-
- return clk->rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EOPNOTSUPP;
- unsigned long flags;
-
- if (!clk)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
-
- if (likely(clk->ops && clk->ops->set_rate)) {
- ret = clk->ops->set_rate(clk, rate);
- if (ret != 0)
- goto out_unlock;
- } else {
- clk->rate = rate;
- ret = 0;
- }
-
- if (clk->ops && clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
-
- propagate_rate(clk);
-
-out_unlock:
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!parent || !clk)
- return ret;
- if (clk->parent == parent)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
- if (clk->usecount == 0) {
- if (clk->ops->set_parent)
- ret = clk->ops->set_parent(clk, parent);
- else
- ret = clk_reparent(clk, parent);
-
- if (ret == 0) {
- if (clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
- pr_debug("set parent of %p to %p (new rate %ld)\n",
- clk, clk->parent, clk->rate);
- propagate_rate(clk);
- }
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
-
- if (likely(clk->ops && clk->ops->round_rate)) {
- unsigned long flags, rounded;
-
- spin_lock_irqsave(&clock_lock, flags);
- rounded = clk->ops->round_rate(clk, rate);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return rounded;
- }
-
- return clk_get_rate(clk);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-#ifdef CONFIG_PM
-static void clks_core_resume(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->usecount && clkp->ops)) {
- unsigned long rate = clkp->rate;
-
- if (likely(clkp->ops->set_parent))
- clkp->ops->set_parent(clkp,
- clkp->parent);
- if (likely(clkp->ops->set_rate))
- clkp->ops->set_rate(clkp, rate);
- else if (likely(clkp->ops->recalc))
- clkp->rate = clkp->ops->recalc(clkp);
- }
- }
-}
-
-static struct syscore_ops clks_syscore_ops = {
- .resume = clks_core_resume,
-};
-
-static int __init clk_syscore_init(void)
-{
- register_syscore_ops(&clks_syscore_ops);
-
- return 0;
-}
-subsys_initcall(clk_syscore_init);
-#endif
-
-static int __init clk_late_init(void)
-{
- unsigned long flags;
- struct clk *clk;
-
- /* disable all clocks with zero use count */
- mutex_lock(&clock_list_sem);
- spin_lock_irqsave(&clock_lock, flags);
-
- list_for_each_entry(clk, &clock_list, node)
- if (!clk->usecount && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- /* from now on allow clock disable operations */
- allow_disable = 1;
-
- spin_unlock_irqrestore(&clock_lock, flags);
- mutex_unlock(&clock_list_sem);
- return 0;
-}
-late_initcall(clk_late_init);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
deleted file mode 100644
index fd72d9088bdcbc..00000000000000
--- a/drivers/sh/clk/cpg.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Helper routines for SuperH Clock Pulse Generator blocks (CPG).
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-
-#define CPG_CKSTP_BIT BIT(8)
-
-static unsigned int sh_clk_read(struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- return ioread8(clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- return ioread16(clk->mapped_reg);
-
- return ioread32(clk->mapped_reg);
-}
-
-static void sh_clk_write(int value, struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- iowrite8(value, clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- iowrite16(value, clk->mapped_reg);
- else
- iowrite32(value, clk->mapped_reg);
-}
-
-static int sh_clk_mstp_enable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
- if (clk->status_reg) {
- unsigned int (*read)(const void __iomem *addr);
- int i;
- void __iomem *mapped_status = (phys_addr_t)clk->status_reg -
- (phys_addr_t)clk->enable_reg + clk->mapped_reg;
-
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- read = ioread8;
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- read = ioread16;
- else
- read = ioread32;
-
- for (i = 1000;
- (read(mapped_status) & (1 << clk->enable_bit)) && i;
- i--)
- cpu_relax();
- if (!i) {
- pr_err("cpg: failed to enable %p[%d]\n",
- clk->enable_reg, clk->enable_bit);
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
-static void sh_clk_mstp_disable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) | (1 << clk->enable_bit), clk);
-}
-
-static struct sh_clk_ops sh_clk_mstp_clk_ops = {
- .enable = sh_clk_mstp_enable,
- .disable = sh_clk_mstp_disable,
- .recalc = followparent_recalc,
-};
-
-int __init sh_clk_mstp_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &sh_clk_mstp_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-/*
- * Div/mult table lookup helpers
- */
-static inline struct clk_div_table *clk_to_div_table(struct clk *clk)
-{
- return clk->priv;
-}
-
-static inline struct clk_div_mult_table *clk_to_div_mult_table(struct clk *clk)
-{
- return clk_to_div_table(clk)->div_mult_table;
-}
-
-/*
- * Common div ops
- */
-static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static unsigned long sh_clk_div_recalc(struct clk *clk)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- unsigned int idx;
-
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, clk->arch_flags ? &clk->arch_flags : NULL);
-
- idx = (sh_clk_read(clk) >> clk->enable_bit) & clk->div_mask;
-
- return clk->freq_table[idx].frequency;
-}
-
-static int sh_clk_div_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk_div_table *dt = clk_to_div_table(clk);
- unsigned long value;
- int idx;
-
- idx = clk_rate_table_find(clk, clk->freq_table, rate);
- if (idx < 0)
- return idx;
-
- value = sh_clk_read(clk);
- value &= ~(clk->div_mask << clk->enable_bit);
- value |= (idx << clk->enable_bit);
- sh_clk_write(value, clk);
-
- /* XXX: Should use a post-change notifier */
- if (dt->kick)
- dt->kick(clk);
-
- return 0;
-}
-
-static int sh_clk_div_enable(struct clk *clk)
-{
- if (clk->div_mask == SH_CLK_DIV6_MSK) {
- int ret = sh_clk_div_set_rate(clk, clk->rate);
- if (ret < 0)
- return ret;
- }
-
- sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk);
- return 0;
-}
-
-static void sh_clk_div_disable(struct clk *clk)
-{
- unsigned int val;
-
- val = sh_clk_read(clk);
- val |= CPG_CKSTP_BIT;
-
- /*
- * div6 clocks require the divisor field to be non-zero or the
- * above CKSTP toggle silently fails. Ensure that the divisor
- * array is reset to its initial state on disable.
- */
- if (clk->flags & CLK_MASK_DIV_ON_DISABLE)
- val |= clk->div_mask;
-
- sh_clk_write(val, clk);
-}
-
-static struct sh_clk_ops sh_clk_div_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
-};
-
-static struct sh_clk_ops sh_clk_div_enable_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
-};
-
-static int __init sh_clk_init_parent(struct clk *clk)
-{
- u32 val;
-
- if (clk->parent)
- return 0;
-
- if (!clk->parent_table || !clk->parent_num)
- return 0;
-
- if (!clk->src_width) {
- pr_err("sh_clk_init_parent: cannot select parent clock\n");
- return -EINVAL;
- }
-
- val = (sh_clk_read(clk) >> clk->src_shift);
- val &= (1 << clk->src_width) - 1;
-
- if (val >= clk->parent_num) {
- pr_err("sh_clk_init_parent: parent table size failed\n");
- return -EINVAL;
- }
-
- clk_reparent(clk, clk->parent_table[val]);
- if (!clk->parent) {
- pr_err("sh_clk_init_parent: unable to set parent");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int __init sh_clk_div_register_ops(struct clk *clks, int nr,
- struct clk_div_table *table, struct sh_clk_ops *ops)
-{
- struct clk *clkp;
- void *freq_table;
- int nr_divs = table->div_mult_table->nr_divisors;
- int freq_table_size = sizeof(struct cpufreq_frequency_table);
- int ret = 0;
- int k;
-
- freq_table_size *= (nr_divs + 1);
- freq_table = kcalloc(nr, freq_table_size, GFP_KERNEL);
- if (!freq_table) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
-
- clkp->ops = ops;
- clkp->priv = table;
-
- clkp->freq_table = freq_table + (k * freq_table_size);
- clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
- ret = clk_register(clkp);
- if (ret == 0)
- ret = sh_clk_init_parent(clkp);
- }
-
- return ret;
-}
-
-/*
- * div6 support
- */
-static int sh_clk_div6_divisors[64] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
- 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
- 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
-};
-
-static struct clk_div_mult_table div6_div_mult_table = {
- .divisors = sh_clk_div6_divisors,
- .nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
-};
-
-static struct clk_div_table sh_clk_div6_table = {
- .div_mult_table = &div6_div_mult_table,
-};
-
-static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret, i;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- value = sh_clk_read(clk) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- sh_clk_write(value | (i << clk->src_shift), clk);
-
- /* Rebuild the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, NULL);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .round_rate = sh_clk_div_round_rate,
- .set_rate = sh_clk_div_set_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div6_set_parent,
-};
-
-int __init sh_clk_div6_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div6_reparent_clk_ops);
-}
-
-/*
- * div4 support
- */
-static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret;
-
- /* we really need a better way to determine parent index, but for
- * now assume internal parent comes with CLK_ENABLE_ON_INIT set,
- * no CLK_ENABLE_ON_INIT means external clock...
- */
-
- if (parent->flags & CLK_ENABLE_ON_INIT)
- value = sh_clk_read(clk) & ~(1 << 7);
- else
- value = sh_clk_read(clk) | (1 << 7);
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- sh_clk_write(value, clk);
-
- /* Rebiuld the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, &clk->arch_flags);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div4_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div4_set_parent,
-};
-
-int __init sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div_clk_ops);
-}
-
-int __init sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div4_reparent_clk_ops);
-}
-
-/* FSI-DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base);
-
- value >>= 16;
- if (value < 2)
- return clk->parent->rate;
-
- return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_div_range_round(clk, 1, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
- __raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base) >> 16;
- if (value < 2)
- return 0;
-
- __raw_writel((value << 16) | 0x3, clk->mapping->base);
-
- return 0;
-}
-
-static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-{
- int idx;
-
- idx = (clk->parent->rate / rate) & 0xffff;
- if (idx < 2)
- __raw_writel(0, clk->mapping->base);
- else
- __raw_writel(idx << 16, clk->mapping->base);
-
- return 0;
-}
-
-static struct sh_clk_ops fsidiv_clk_ops = {
- .recalc = fsidiv_recalc,
- .round_rate = fsidiv_round_rate,
- .set_rate = fsidiv_set_rate,
- .enable = fsidiv_enable,
- .disable = fsidiv_disable,
-};
-
-int __init sh_clk_fsidiv_register(struct clk *clks, int nr)
-{
- struct clk_mapping *map;
- int i;
-
- for (i = 0; i < nr; i++) {
-
- map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL);
- if (!map) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- /* clks[i].enable_reg came from SH_CLK_FSIDIV() */
- map->phys = (phys_addr_t)clks[i].enable_reg;
- map->len = 8;
-
- clks[i].enable_reg = 0; /* remove .enable_reg */
- clks[i].ops = &fsidiv_clk_ops;
- clks[i].mapping = map;
-
- clk_register(&clks[i]);
- }
-
- return 0;
-}
diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
deleted file mode 100644
index 5c701709fef528..00000000000000
--- a/drivers/sh/intc/Kconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config SH_INTC
- bool
- select IRQ_DOMAIN
-
-if SH_INTC
-
-comment "Interrupt controller options"
-
-config INTC_USERIMASK
- bool "Userspace interrupt masking support"
- depends on (SUPERH && CPU_SH4A) || COMPILE_TEST
- help
- This enables support for hardware-assisted userspace hardirq
- masking.
-
- SH-4A and newer interrupt blocks all support a special shadowed
- page with all non-masking registers obscured when mapped in to
- userspace. This is primarily for use by userspace device
- drivers that are using special priority levels.
-
- If in doubt, say N.
-
-config INTC_BALANCING
- bool "Hardware IRQ balancing support"
- depends on SMP && SUPERH && CPU_SHX3
- help
- This enables support for IRQ auto-distribution mode on SH-X3
- SMP parts. All of the balancing and CPU wakeup decisions are
- taken care of automatically by hardware for distributed
- vectors.
-
- If in doubt, say N.
-
-config INTC_MAPPING_DEBUG
- bool "Expose IRQ to per-controller id mapping via debugfs"
- depends on DEBUG_FS
- help
- This will create a debugfs entry for showing the relationship
- between system IRQs and the per-controller id tables.
-
- If in doubt, say N.
-
-endif
diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile
deleted file mode 100644
index bdd855327e41d5..00000000000000
--- a/drivers/sh/intc/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o
-
-obj-$(CONFIG_INTC_BALANCING) += balancing.o
-obj-$(CONFIG_INTC_USERIMASK) += userimask.o
-obj-$(CONFIG_INTC_MAPPING_DEBUG) += virq-debugfs.o
diff --git a/drivers/sh/intc/access.c b/drivers/sh/intc/access.c
deleted file mode 100644
index 114390f967d26e..00000000000000
--- a/drivers/sh/intc/access.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Common INTC2 register accessors
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include "internals.h"
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address)
-{
- struct intc_window *window;
- int k;
-
- /* scan through physical windows and convert address */
- for (k = 0; k < d->nr_windows; k++) {
- window = d->window + k;
-
- if (address < window->phys)
- continue;
-
- if (address >= (window->phys + window->size))
- continue;
-
- address -= window->phys;
- address += (unsigned long)window->virt;
-
- return address;
- }
-
- /* no windows defined, register must be 1:1 mapped virt:phys */
- return address;
-}
-
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address)
-{
- unsigned int k;
-
- address = intc_phys_to_virt(d, address);
-
- for (k = 0; k < d->nr_reg; k++) {
- if (d->reg[k] == address)
- return k;
- }
-
- BUG();
- return 0;
-}
-
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
-
- value &= ~(((1 << width) - 1) << shift);
- value |= field_value << shift;
- return value;
-}
-
-unsigned long intc_get_field_from_handle(unsigned int value, unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
- unsigned int mask = ((1 << width) - 1) << shift;
-
- return (value & mask) >> shift;
-}
-
-static unsigned long test_8(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readb(ptr), h);
-}
-
-static unsigned long test_16(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readw(ptr), h);
-}
-
-static unsigned long test_32(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readl(ptr), h);
-}
-
-static unsigned long write_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writeb(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writew(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writel(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long modify_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readb(ptr), data, h);
- __raw_writeb(value, ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readw(ptr), data, h);
- __raw_writew(value, ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readl(ptr), data, h);
- __raw_writel(value, ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long intc_mode_field(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1));
-}
-
-static unsigned long intc_mode_zero(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, 0);
-}
-
-static unsigned long intc_mode_prio(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, intc_get_prio_level(irq));
-}
-
-unsigned long (*intc_reg_fns[])(unsigned long addr,
- unsigned long h,
- unsigned long data) = {
- [REG_FN_TEST_BASE + 0] = test_8,
- [REG_FN_TEST_BASE + 1] = test_16,
- [REG_FN_TEST_BASE + 3] = test_32,
- [REG_FN_WRITE_BASE + 0] = write_8,
- [REG_FN_WRITE_BASE + 1] = write_16,
- [REG_FN_WRITE_BASE + 3] = write_32,
- [REG_FN_MODIFY_BASE + 0] = modify_8,
- [REG_FN_MODIFY_BASE + 1] = modify_16,
- [REG_FN_MODIFY_BASE + 3] = modify_32,
-};
-
-unsigned long (*intc_enable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_prio,
- [MODE_PCLR_REG] = intc_mode_prio,
-};
-
-unsigned long (*intc_disable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_zero,
- [MODE_MASK_REG] = intc_mode_field,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_zero,
- [MODE_PCLR_REG] = intc_mode_field,
-};
-
-unsigned long (*intc_enable_noprio_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_field,
- [MODE_PCLR_REG] = intc_mode_field,
-};
diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c
deleted file mode 100644
index bc780807ccb0fe..00000000000000
--- a/drivers/sh/intc/balancing.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Support for hardware-managed IRQ auto-distribution.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "internals.h"
-
-static unsigned long dist_handle[INTC_NR_IRQS];
-
-void intc_balancing_enable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 1);
-}
-
-void intc_balancing_disable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 0);
-}
-
-static unsigned int intc_dist_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_mask_regs; i++) {
- mr = desc->hw.mask_regs + i;
-
- /*
- * Skip this entry if there's no auto-distribution
- * register associated with it.
- */
- if (!mr->dist_reg)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->dist_reg;
- reg_d = mr->dist_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- /*
- * It's possible we've gotten here with no distribution options
- * available for the IRQ in question, so we just skip over those.
- */
- return 0;
-}
-
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.mask_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- dist_handle[irq] = intc_dist_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
deleted file mode 100644
index 828d81e02b37ab..00000000000000
--- a/drivers/sh/intc/chip.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * IRQ chip definitions for INTC IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/cpumask.h>
-#include <linux/bsearch.h>
-#include <linux/io.h>
-#include "internals.h"
-
-void _intc_enable(struct irq_data *data, unsigned long handle)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long addr;
- unsigned int cpu;
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-
- intc_balancing_enable(irq);
-}
-
-static void intc_enable(struct irq_data *data)
-{
- _intc_enable(data, (unsigned long)irq_data_get_irq_chip_data(data));
-}
-
-static void intc_disable(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = (unsigned long)irq_data_get_irq_chip_data(data);
- unsigned long addr;
- unsigned int cpu;
-
- intc_balancing_disable(irq);
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-}
-
-#ifdef CONFIG_SMP
-/*
- * This is held with the irq desc lock held, so we don't require any
- * additional locking here at the intc desc level. The affinity mask is
- * later tested in the enable/disable paths.
- */
-static int intc_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask,
- bool force)
-{
- if (!cpumask_intersects(cpumask, cpu_online_mask))
- return -1;
-
- irq_data_update_affinity(data, cpumask);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif
-
-static void intc_mask_ack(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = intc_get_ack_handle(irq);
- void __iomem *addr;
-
- intc_disable(data);
-
- /* read register and write zero only to the associated bit */
- if (handle) {
- unsigned int value;
-
- addr = (void __iomem *)INTC_REG(d, _INTC_ADDR_D(handle), 0);
- value = intc_set_field_from_handle(0, 1, handle);
-
- switch (_INTC_FN(handle)) {
- case REG_FN_MODIFY_BASE + 0: /* 8bit */
- __raw_readb(addr);
- __raw_writeb(0xff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 1: /* 16bit */
- __raw_readw(addr);
- __raw_writew(0xffff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 3: /* 32bit */
- __raw_readl(addr);
- __raw_writel(0xffffffff ^ value, addr);
- break;
- default:
- BUG();
- break;
- }
- }
-}
-
-static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
- unsigned int nr_hp,
- unsigned int irq)
-{
- struct intc_handle_int key;
-
- key.irq = irq;
- key.handle = 0;
-
- return bsearch(&key, hp, nr_hp, sizeof(*hp), intc_handle_int_cmp);
-}
-
-int intc_set_priority(unsigned int irq, unsigned int prio)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- struct irq_data *data = irq_get_irq_data(irq);
- struct intc_handle_int *ihp;
-
- if (!intc_get_prio_level(irq) || prio <= 1)
- return -EINVAL;
-
- ihp = intc_find_irq(d->prio, d->nr_prio, irq);
- if (ihp) {
- if (prio >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- intc_set_prio_level(irq, prio);
-
- /*
- * only set secondary masking method directly
- * primary masking method is using intc_prio_level[irq]
- * priority level will be set during next enable()
- */
- if (_INTC_FN(ihp->handle) != REG_FN_ERR)
- _intc_enable(data, ihp->handle);
- }
- return 0;
-}
-
-#define SENSE_VALID_FLAG 0x80
-#define VALID(x) (x | SENSE_VALID_FLAG)
-
-static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
- [IRQ_TYPE_EDGE_FALLING] = VALID(0),
- [IRQ_TYPE_EDGE_RISING] = VALID(1),
- [IRQ_TYPE_LEVEL_LOW] = VALID(2),
- /* SH7706, SH7707 and SH7709 do not support high level triggered */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7709)
- [IRQ_TYPE_LEVEL_HIGH] = VALID(3),
-#endif
-#if defined(CONFIG_ARM) /* all recent SH-Mobile / R-Mobile ARM support this */
- [IRQ_TYPE_EDGE_BOTH] = VALID(4),
-#endif
-};
-
-static int intc_set_type(struct irq_data *data, unsigned int type)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK];
- struct intc_handle_int *ihp;
- unsigned long addr;
-
- if (!value)
- return -EINVAL;
-
- value &= ~SENSE_VALID_FLAG;
-
- ihp = intc_find_irq(d->sense, d->nr_sense, irq);
- if (ihp) {
- /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
- if (value >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
- }
-
- return 0;
-}
-
-struct irq_chip intc_irq_chip = {
- .irq_mask = intc_disable,
- .irq_unmask = intc_enable,
- .irq_mask_ack = intc_mask_ack,
- .irq_enable = intc_enable,
- .irq_disable = intc_disable,
- .irq_set_type = intc_set_type,
-#ifdef CONFIG_SMP
- .irq_set_affinity = intc_set_affinity,
-#endif
- .flags = IRQCHIP_SKIP_SET_WAKE,
-};
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
deleted file mode 100644
index ca4f4ca413f11d..00000000000000
--- a/drivers/sh/intc/core.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * Based on intc2.c and ipr.c
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2005, 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/irqdomain.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/radix-tree.h>
-#include <linux/export.h>
-#include <linux/sort.h>
-#include "internals.h"
-
-LIST_HEAD(intc_list);
-DEFINE_RAW_SPINLOCK(intc_big_lock);
-static unsigned int nr_intc_controllers;
-
-/*
- * Default priority level
- * - this needs to be at least 2 for 5-bit priorities on 7780
- */
-static unsigned int default_prio_level = 2; /* 2 - 16 */
-static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */
-
-unsigned int intc_get_dfl_prio_level(void)
-{
- return default_prio_level;
-}
-
-unsigned int intc_get_prio_level(unsigned int irq)
-{
- return intc_prio_level[irq];
-}
-
-void intc_set_prio_level(unsigned int irq, unsigned int level)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_prio_level[irq] = level;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-static void intc_redirect_irq(struct irq_desc *desc)
-{
- generic_handle_irq((unsigned int)irq_desc_get_handler_data(desc));
-}
-
-static void __init intc_register_irq(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int irq)
-{
- struct intc_handle_int *hp;
- struct irq_data *irq_data;
- unsigned int data[2], primary;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-
- /*
- * Prefer single interrupt source bitmap over other combinations:
- *
- * 1. bitmap, single interrupt source
- * 2. priority, single interrupt source
- * 3. bitmap, multiple interrupt sources (groups)
- * 4. priority, multiple interrupt sources (groups)
- */
- data[0] = intc_get_mask_handle(desc, d, enum_id, 0);
- data[1] = intc_get_prio_handle(desc, d, enum_id, 0);
-
- primary = 0;
- if (!data[0] && data[1])
- primary = 1;
-
- if (!data[0] && !data[1])
- pr_warn("missing unique irq mask for irq %d (vect 0x%04x)\n",
- irq, irq2evt(irq));
-
- data[0] = data[0] ? data[0] : intc_get_mask_handle(desc, d, enum_id, 1);
- data[1] = data[1] ? data[1] : intc_get_prio_handle(desc, d, enum_id, 1);
-
- if (!data[primary])
- primary ^= 1;
-
- BUG_ON(!data[primary]); /* must have primary masking method */
-
- irq_data = irq_get_irq_data(irq);
-
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &d->chip, handle_level_irq,
- "level");
- irq_set_chip_data(irq, (void *)data[primary]);
-
- /*
- * set priority level
- */
- intc_set_prio_level(irq, intc_get_dfl_prio_level());
-
- /* enable secondary masking method if present */
- if (data[!primary])
- _intc_enable(irq_data, data[!primary]);
-
- /* add irq to d->prio list if priority is available */
- if (data[1]) {
- hp = d->prio + d->nr_prio;
- hp->irq = irq;
- hp->handle = data[1];
-
- if (primary) {
- /*
- * only secondary priority should access registers, so
- * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority()
- */
- hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0);
- hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0);
- }
- d->nr_prio++;
- }
-
- /* add irq to d->sense list if sense is available */
- data[0] = intc_get_sense_handle(desc, d, enum_id);
- if (data[0]) {
- (d->sense + d->nr_sense)->irq = irq;
- (d->sense + d->nr_sense)->handle = data[0];
- d->nr_sense++;
- }
-
- /* irq should be disabled by default */
- d->chip.irq_mask(irq_data);
-
- intc_set_ack_handle(irq, desc, d, enum_id);
- intc_set_dist_handle(irq, desc, d, enum_id);
-
- activate_irq(irq);
-}
-
-static unsigned int __init save_reg(struct intc_desc_int *d,
- unsigned int cnt,
- unsigned long value,
- unsigned int smp)
-{
- if (value) {
- value = intc_phys_to_virt(d, value);
-
- d->reg[cnt] = value;
-#ifdef CONFIG_SMP
- d->smp[cnt] = smp;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-static bool __init intc_map(struct irq_domain *domain, int irq)
-{
- if (!irq_to_desc(irq) && irq_alloc_desc_at(irq, NUMA_NO_NODE) != irq) {
- pr_err("uname to allocate IRQ %d\n", irq);
- return false;
- }
-
- if (irq_domain_associate(domain, irq, irq)) {
- pr_err("domain association failure\n");
- return false;
- }
-
- return true;
-}
-
-int __init register_intc_controller(struct intc_desc *desc)
-{
- unsigned int i, k, smp;
- struct intc_hw_desc *hw = &desc->hw;
- struct intc_desc_int *d;
- struct resource *res;
-
- pr_info("Registered controller '%s' with %u IRQs\n",
- desc->name, hw->nr_vectors);
-
- d = kzalloc(sizeof(*d), GFP_NOWAIT);
- if (!d)
- goto err0;
-
- INIT_LIST_HEAD(&d->list);
- list_add_tail(&d->list, &intc_list);
-
- raw_spin_lock_init(&d->lock);
- INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
-
- d->index = nr_intc_controllers;
-
- if (desc->num_resources) {
- d->nr_windows = desc->num_resources;
- d->window = kcalloc(d->nr_windows, sizeof(*d->window),
- GFP_NOWAIT);
- if (!d->window)
- goto err1;
-
- for (k = 0; k < d->nr_windows; k++) {
- res = desc->resource + k;
- WARN_ON(resource_type(res) != IORESOURCE_MEM);
- d->window[k].phys = res->start;
- d->window[k].size = resource_size(res);
- d->window[k].virt = ioremap(res->start,
- resource_size(res));
- if (!d->window[k].virt)
- goto err2;
- }
- }
-
- d->nr_reg = hw->mask_regs ? hw->nr_mask_regs * 2 : 0;
-#ifdef CONFIG_INTC_BALANCING
- if (d->nr_reg)
- d->nr_reg += hw->nr_mask_regs;
-#endif
- d->nr_reg += hw->prio_regs ? hw->nr_prio_regs * 2 : 0;
- d->nr_reg += hw->sense_regs ? hw->nr_sense_regs : 0;
- d->nr_reg += hw->ack_regs ? hw->nr_ack_regs : 0;
- d->nr_reg += hw->subgroups ? hw->nr_subgroups : 0;
-
- d->reg = kcalloc(d->nr_reg, sizeof(*d->reg), GFP_NOWAIT);
- if (!d->reg)
- goto err2;
-
-#ifdef CONFIG_SMP
- d->smp = kcalloc(d->nr_reg, sizeof(*d->smp), GFP_NOWAIT);
- if (!d->smp)
- goto err3;
-#endif
- k = 0;
-
- if (hw->mask_regs) {
- for (i = 0; i < hw->nr_mask_regs; i++) {
- smp = IS_SMP(hw->mask_regs[i]);
- k += save_reg(d, k, hw->mask_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->mask_regs[i].clr_reg, smp);
-#ifdef CONFIG_INTC_BALANCING
- k += save_reg(d, k, hw->mask_regs[i].dist_reg, 0);
-#endif
- }
- }
-
- if (hw->prio_regs) {
- d->prio = kcalloc(hw->nr_vectors, sizeof(*d->prio),
- GFP_NOWAIT);
- if (!d->prio)
- goto err4;
-
- for (i = 0; i < hw->nr_prio_regs; i++) {
- smp = IS_SMP(hw->prio_regs[i]);
- k += save_reg(d, k, hw->prio_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp);
- }
-
- sort(d->prio, hw->nr_prio_regs, sizeof(*d->prio),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->sense_regs) {
- d->sense = kcalloc(hw->nr_vectors, sizeof(*d->sense),
- GFP_NOWAIT);
- if (!d->sense)
- goto err5;
-
- for (i = 0; i < hw->nr_sense_regs; i++)
- k += save_reg(d, k, hw->sense_regs[i].reg, 0);
-
- sort(d->sense, hw->nr_sense_regs, sizeof(*d->sense),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->subgroups)
- for (i = 0; i < hw->nr_subgroups; i++)
- if (hw->subgroups[i].reg)
- k+= save_reg(d, k, hw->subgroups[i].reg, 0);
-
- memcpy(&d->chip, &intc_irq_chip, sizeof(struct irq_chip));
- d->chip.name = desc->name;
-
- if (hw->ack_regs)
- for (i = 0; i < hw->nr_ack_regs; i++)
- k += save_reg(d, k, hw->ack_regs[i].set_reg, 0);
- else
- d->chip.irq_mask_ack = d->chip.irq_disable;
-
- /* disable bits matching force_disable before registering irqs */
- if (desc->force_disable)
- intc_enable_disable_enum(desc, d, desc->force_disable, 0);
-
- /* disable bits matching force_enable before registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 0);
-
- BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
- intc_irq_domain_init(d, hw);
-
- /* register the vectors one by one */
- for (i = 0; i < hw->nr_vectors; i++) {
- struct intc_vect *vect = hw->vectors + i;
- unsigned int irq = evt2irq(vect->vect);
-
- if (!vect->enum_id)
- continue;
-
- if (!intc_map(d->domain, irq))
- continue;
-
- intc_irq_xlate_set(irq, vect->enum_id, d);
- intc_register_irq(desc, d, vect->enum_id, irq);
-
- for (k = i + 1; k < hw->nr_vectors; k++) {
- struct intc_vect *vect2 = hw->vectors + k;
- unsigned int irq2 = evt2irq(vect2->vect);
-
- if (vect->enum_id != vect2->enum_id)
- continue;
-
- /*
- * In the case of multi-evt handling and sparse
- * IRQ support, each vector still needs to have
- * its own backing irq_desc.
- */
- if (!intc_map(d->domain, irq2))
- continue;
-
- vect2->enum_id = 0;
-
- /* redirect this interrupts to the first one */
- irq_set_chip(irq2, &dummy_irq_chip);
- irq_set_chained_handler_and_data(irq2,
- intc_redirect_irq,
- (void *)irq);
- }
- }
-
- intc_subgroup_init(desc, d);
-
- /* enable bits matching force_enable after registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 1);
-
- d->skip_suspend = desc->skip_syscore_suspend;
-
- nr_intc_controllers++;
-
- return 0;
-err5:
- kfree(d->prio);
-err4:
-#ifdef CONFIG_SMP
- kfree(d->smp);
-err3:
-#endif
- kfree(d->reg);
-err2:
- for (k = 0; k < d->nr_windows; k++)
- if (d->window[k].virt)
- iounmap(d->window[k].virt);
-
- kfree(d->window);
-err1:
- kfree(d);
-err0:
- pr_err("unable to allocate INTC memory\n");
-
- return -ENOMEM;
-}
-
-static int intc_suspend(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- /* enable wakeup irqs belonging to this intc controller */
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- if (chip != &d->chip)
- continue;
- if (irqd_is_wakeup_set(data))
- chip->irq_enable(data);
- }
- }
- return 0;
-}
-
-static void intc_resume(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- /*
- * This will catch the redirect and VIRQ cases
- * due to the dummy_irq_chip being inserted.
- */
- if (chip != &d->chip)
- continue;
- if (irqd_irq_disabled(data))
- chip->irq_disable(data);
- else
- chip->irq_enable(data);
- }
- }
-}
-
-struct syscore_ops intc_syscore_ops = {
- .suspend = intc_suspend,
- .resume = intc_resume,
-};
-
-struct bus_type intc_subsys = {
- .name = "intc",
- .dev_name = "intc",
-};
-
-static ssize_t
-show_intc_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct intc_desc_int *d;
-
- d = container_of(dev, struct intc_desc_int, dev);
-
- return sprintf(buf, "%s\n", d->chip.name);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, show_intc_name, NULL);
-
-static int __init register_intc_devs(void)
-{
- struct intc_desc_int *d;
- int error;
-
- register_syscore_ops(&intc_syscore_ops);
-
- error = subsys_system_register(&intc_subsys, NULL);
- if (!error) {
- list_for_each_entry(d, &intc_list, list) {
- d->dev.id = d->index;
- d->dev.bus = &intc_subsys;
- error = device_register(&d->dev);
- if (error == 0)
- error = device_create_file(&d->dev,
- &dev_attr_name);
- if (error)
- break;
- }
- }
-
- if (error)
- pr_err("device registration error\n");
-
- return error;
-}
-device_initcall(register_intc_devs);
diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c
deleted file mode 100644
index 7863a44918a293..00000000000000
--- a/drivers/sh/intc/handle.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include "internals.h"
-
-static unsigned long ack_handle[INTC_NR_IRQS];
-
-static intc_enum __init intc_grp_id(struct intc_desc *desc,
- intc_enum enum_id)
-{
- struct intc_group *g = desc->hw.groups;
- unsigned int i, j;
-
- for (i = 0; g && enum_id && i < desc->hw.nr_groups; i++) {
- g = desc->hw.groups + i;
-
- for (j = 0; g->enum_ids[j]; j++) {
- if (g->enum_ids[j] != enum_id)
- continue;
-
- return g->enum_id;
- }
- }
-
- return 0;
-}
-
-static unsigned int __init _intc_mask_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int fn, mode;
- unsigned long reg_e, reg_d;
-
- while (mr && enum_id && *reg_idx < desc->hw.nr_mask_regs) {
- mr = desc->hw.mask_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(mr->enum_ids); (*fld_idx)++) {
- if (mr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (mr->set_reg && mr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_DUAL_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->set_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- if (mr->set_reg) {
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
- } else {
- mode = MODE_MASK_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->clr_reg;
- }
- }
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - *fld_idx);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_mask_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_mask_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int __init _intc_prio_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_prio_reg *pr = desc->hw.prio_regs;
- unsigned int fn, n, mode, bit;
- unsigned long reg_e, reg_d;
-
- while (pr && enum_id && *reg_idx < desc->hw.nr_prio_regs) {
- pr = desc->hw.prio_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(pr->enum_ids); (*fld_idx)++) {
- if (pr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (pr->set_reg && pr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_PCLR_REG;
- reg_e = pr->set_reg;
- reg_d = pr->clr_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_PRIO_REG;
- if (!pr->set_reg)
- BUG();
- reg_e = pr->set_reg;
- reg_d = pr->set_reg;
- }
-
- fn += (pr->reg_width >> 3) - 1;
- n = *fld_idx + 1;
-
- BUG_ON(n * pr->field_width > pr->reg_width);
-
- bit = pr->reg_width - (n * pr->field_width);
-
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- pr->field_width, bit);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_prio_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_prio_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int intc_ack_data(struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.ack_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_ack_regs; i++) {
- mr = desc->hw.ack_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- return 0;
-}
-
-static void intc_enable_disable(struct intc_desc_int *d,
- unsigned long handle, int do_enable)
-{
- unsigned long addr;
- unsigned int cpu;
- unsigned long (*fn)(unsigned long, unsigned long,
- unsigned long (*)(unsigned long, unsigned long,
- unsigned long),
- unsigned int);
-
- if (do_enable) {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- fn = intc_enable_noprio_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- } else {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- fn = intc_disable_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- }
-}
-
-void __init intc_enable_disable_enum(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int enable)
-{
- unsigned int i, j, data;
-
- /* go through and enable/disable all mask bits */
- i = j = 0;
- do {
- data = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
- j++;
- } while (data);
-
- /* go through and enable/disable all priority fields */
- i = j = 0;
- do {
- data = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
-
- j++;
- } while (data);
-}
-
-unsigned int __init
-intc_get_sense_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_sense_reg *sr = desc->hw.sense_regs;
- unsigned int i, j, fn, bit;
-
- for (i = 0; sr && enum_id && i < desc->hw.nr_sense_regs; i++) {
- sr = desc->hw.sense_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
- if (sr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- fn += (sr->reg_width >> 3) - 1;
-
- BUG_ON((j + 1) * sr->field_width > sr->reg_width);
-
- bit = sr->reg_width - ((j + 1) * sr->field_width);
-
- return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg),
- 0, sr->field_width, bit);
- }
- }
-
- return 0;
-}
-
-
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.ack_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- ack_handle[irq] = intc_ack_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-unsigned long intc_get_ack_handle(unsigned int irq)
-{
- return ack_handle[irq];
-}
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
deleted file mode 100644
index fa73c173b56a60..00000000000000
--- a/drivers/sh/intc/internals.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/list.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/radix-tree.h>
-#include <linux/device.h>
-
-#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
- ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
- ((addr_e) << 16) | ((addr_d << 24)))
-
-#define _INTC_SHIFT(h) (h & 0x1f)
-#define _INTC_WIDTH(h) ((h >> 5) & 0xf)
-#define _INTC_FN(h) ((h >> 9) & 0xf)
-#define _INTC_MODE(h) ((h >> 13) & 0x7)
-#define _INTC_ADDR_E(h) ((h >> 16) & 0xff)
-#define _INTC_ADDR_D(h) ((h >> 24) & 0xff)
-
-#ifdef CONFIG_SMP
-#define IS_SMP(x) (x.smp)
-#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
-#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1)
-#else
-#define IS_SMP(x) 0
-#define INTC_REG(d, x, c) (d->reg[(x)])
-#define SMP_NR(d, x) 1
-#endif
-
-struct intc_handle_int {
- unsigned int irq;
- unsigned long handle;
-};
-
-struct intc_window {
- phys_addr_t phys;
- void __iomem *virt;
- unsigned long size;
-};
-
-struct intc_map_entry {
- intc_enum enum_id;
- struct intc_desc_int *desc;
-};
-
-struct intc_subgroup_entry {
- unsigned int pirq;
- intc_enum enum_id;
- unsigned long handle;
-};
-
-struct intc_desc_int {
- struct list_head list;
- struct device dev;
- struct radix_tree_root tree;
- raw_spinlock_t lock;
- unsigned int index;
- unsigned long *reg;
-#ifdef CONFIG_SMP
- unsigned long *smp;
-#endif
- unsigned int nr_reg;
- struct intc_handle_int *prio;
- unsigned int nr_prio;
- struct intc_handle_int *sense;
- unsigned int nr_sense;
- struct intc_window *window;
- unsigned int nr_windows;
- struct irq_domain *domain;
- struct irq_chip chip;
- bool skip_suspend;
-};
-
-
-enum {
- REG_FN_ERR = 0,
- REG_FN_TEST_BASE = 1,
- REG_FN_WRITE_BASE = 5,
- REG_FN_MODIFY_BASE = 9
-};
-
-enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
- MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */
- MODE_DUAL_REG, /* Two registers, set bit to enable / disable */
- MODE_PRIO_REG, /* Priority value written to enable interrupt */
- MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */
-};
-
-static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
-{
- struct irq_chip *chip = irq_get_chip(irq);
-
- return container_of(chip, struct intc_desc_int, chip);
-}
-
-/*
- * Grumble.
- */
-static inline void activate_irq(int irq)
-{
- irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
-}
-
-static inline int intc_handle_int_cmp(const void *a, const void *b)
-{
- const struct intc_handle_int *_a = a;
- const struct intc_handle_int *_b = b;
-
- return _a->irq - _b->irq;
-}
-
-/* access.c */
-extern unsigned long
-(*intc_reg_fns[])(unsigned long addr, unsigned long h, unsigned long data);
-
-extern unsigned long
-(*intc_enable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_disable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_enable_noprio_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle);
-unsigned long intc_get_field_from_handle(unsigned int value,
- unsigned int handle);
-
-/* balancing.c */
-#ifdef CONFIG_INTC_BALANCING
-void intc_balancing_enable(unsigned int irq);
-void intc_balancing_disable(unsigned int irq);
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-#else
-static inline void intc_balancing_enable(unsigned int irq) { }
-static inline void intc_balancing_disable(unsigned int irq) { }
-static inline void
-intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id) { }
-#endif
-
-/* chip.c */
-extern struct irq_chip intc_irq_chip;
-void _intc_enable(struct irq_data *data, unsigned long handle);
-
-/* core.c */
-extern struct list_head intc_list;
-extern raw_spinlock_t intc_big_lock;
-extern struct bus_type intc_subsys;
-
-unsigned int intc_get_dfl_prio_level(void);
-unsigned int intc_get_prio_level(unsigned int irq);
-void intc_set_prio_level(unsigned int irq, unsigned int level);
-
-/* handle.c */
-unsigned int intc_get_mask_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_prio_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_sense_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id);
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-unsigned long intc_get_ack_handle(unsigned int irq);
-void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int enable);
-
-/* irqdomain.c */
-void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw);
-
-/* virq.c */
-void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d);
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d);
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq);
diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c
deleted file mode 100644
index 3968f1c3c5c308..00000000000000
--- a/drivers/sh/intc/irqdomain.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * IRQ domain support for SH INTC subsystem
- *
- * Copyright (C) 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/irqdomain.h>
-#include <linux/sh_intc.h>
-#include <linux/export.h>
-#include "internals.h"
-
-/**
- * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs.
- *
- * This takes care of exception vector to hwirq translation through
- * by way of evt2irq() translation.
- *
- * Note: For platforms that use a flat vector space without INTEVT this
- * basically just mimics irq_domain_xlate_onecell() by way of a nopped
- * out evt2irq() implementation.
- */
-static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type)
-{
- if (WARN_ON(intsize < 1))
- return -EINVAL;
-
- *out_hwirq = evt2irq(intspec[0]);
- *out_type = IRQ_TYPE_NONE;
-
- return 0;
-}
-
-static const struct irq_domain_ops intc_evt_ops = {
- .xlate = intc_evt_xlate,
-};
-
-void __init intc_irq_domain_init(struct intc_desc_int *d,
- struct intc_hw_desc *hw)
-{
- unsigned int irq_base, irq_end;
-
- /*
- * Quick linear revmap check
- */
- irq_base = evt2irq(hw->vectors[0].vect);
- irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect);
-
- /*
- * Linear domains have a hard-wired assertion that IRQs start at
- * 0 in order to make some performance optimizations. Lamely
- * restrict the linear case to these conditions here, taking the
- * tree penalty for linear cases with non-zero hwirq bases.
- */
- if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
- d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
- &intc_evt_ops, NULL);
- else
- d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
-
- BUG_ON(!d->domain);
-}
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
deleted file mode 100644
index f9f043a3d90a23..00000000000000
--- a/drivers/sh/intc/userimask.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Support for hardware-assisted userspace interrupt masking.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/stat.h>
-#include <linux/sizes.h>
-#include "internals.h"
-
-static void __iomem *uimask;
-
-static ssize_t
-show_intc_userimask(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", (__raw_readl(uimask) >> 4) & 0xf);
-}
-
-static ssize_t
-store_intc_userimask(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned long level;
-
- level = simple_strtoul(buf, NULL, 10);
-
- /*
- * Minimal acceptable IRQ levels are in the 2 - 16 range, but
- * these are chomped so as to not interfere with normal IRQs.
- *
- * Level 1 is a special case on some CPUs in that it's not
- * directly settable, but given that USERIMASK cuts off below a
- * certain level, we don't care about this limitation here.
- * Level 0 on the other hand equates to user masking disabled.
- *
- * We use the default priority level as a cut off so that only
- * special case opt-in IRQs can be mangled.
- */
- if (level >= intc_get_dfl_prio_level())
- return -EINVAL;
-
- __raw_writel(0xa5 << 24 | level << 4, uimask);
-
- return count;
-}
-
-static DEVICE_ATTR(userimask, S_IRUSR | S_IWUSR,
- show_intc_userimask, store_intc_userimask);
-
-
-static int __init userimask_sysdev_init(void)
-{
- if (unlikely(!uimask))
- return -ENXIO;
-
- return device_create_file(intc_subsys.dev_root, &dev_attr_userimask);
-}
-late_initcall(userimask_sysdev_init);
-
-int register_intc_userimask(unsigned long addr)
-{
- if (unlikely(uimask))
- return -EBUSY;
-
- uimask = ioremap(addr, SZ_4K);
- if (unlikely(!uimask))
- return -ENOMEM;
-
- pr_info("userimask support registered for levels 0 -> %d\n",
- intc_get_dfl_prio_level() - 1);
-
- return 0;
-}
diff --git a/drivers/sh/intc/virq-debugfs.c b/drivers/sh/intc/virq-debugfs.c
deleted file mode 100644
index 939915a07d9997..00000000000000
--- a/drivers/sh/intc/virq-debugfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Support for virtual IRQ subgroups debugfs mapping.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Modelled after arch/powerpc/kernel/irq.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/seq_file.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include "internals.h"
-
-static int intc_irq_xlate_show(struct seq_file *m, void *priv)
-{
- int i;
-
- seq_printf(m, "%-5s %-7s %-15s\n", "irq", "enum", "chip name");
-
- for (i = 1; i < nr_irqs; i++) {
- struct intc_map_entry *entry = intc_irq_xlate_get(i);
- struct intc_desc_int *desc = entry->desc;
-
- if (!desc)
- continue;
-
- seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05x ", entry->enum_id);
- seq_printf(m, "%-15s\n", desc->chip.name);
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(intc_irq_xlate);
-
-static int __init intc_irq_xlate_init(void)
-{
- /*
- * XXX.. use arch_debugfs_dir here when all of the intc users are
- * converted.
- */
- if (debugfs_create_file("intc_irq_xlate", S_IRUGO, NULL, NULL,
- &intc_irq_xlate_fops) == NULL)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(intc_irq_xlate_init);
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
deleted file mode 100644
index a638c3048207c0..00000000000000
--- a/drivers/sh/intc/virq.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Support for virtual IRQ subgroups.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include "internals.h"
-
-static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS];
-
-struct intc_virq_list {
- unsigned int irq;
- struct intc_virq_list *next;
-};
-
-#define for_each_virq(entry, head) \
- for (entry = head; entry; entry = entry->next)
-
-/*
- * Tags for the radix tree
- */
-#define INTC_TAG_VIRQ_NEEDS_ALLOC 0
-
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_irq_xlate[irq].enum_id = id;
- intc_irq_xlate[irq].desc = d;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq)
-{
- return intc_irq_xlate + irq;
-}
-
-int intc_irq_lookup(const char *chipname, intc_enum enum_id)
-{
- struct intc_map_entry *ptr;
- struct intc_desc_int *d;
- int irq = -1;
-
- list_for_each_entry(d, &intc_list, list) {
- int tagged;
-
- if (strcmp(d->chip.name, chipname) != 0)
- continue;
-
- /*
- * Catch early lookups for subgroup VIRQs that have not
- * yet been allocated an IRQ. This already includes a
- * fast-path out if the tree is untagged, so there is no
- * need to explicitly test the root tree.
- */
- tagged = radix_tree_tag_get(&d->tree, enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- if (unlikely(tagged))
- break;
-
- ptr = radix_tree_lookup(&d->tree, enum_id);
- if (ptr) {
- irq = ptr - intc_irq_xlate;
- break;
- }
- }
-
- return irq;
-}
-EXPORT_SYMBOL_GPL(intc_irq_lookup);
-
-static int add_virq_to_pirq(unsigned int irq, unsigned int virq)
-{
- struct intc_virq_list *entry;
- struct intc_virq_list **last = NULL;
-
- /* scan for duplicates */
- for_each_virq(entry, irq_get_handler_data(irq)) {
- if (entry->irq == virq)
- return 0;
- last = &entry->next;
- }
-
- entry = kzalloc(sizeof(struct intc_virq_list), GFP_ATOMIC);
- if (!entry)
- return -ENOMEM;
-
- entry->irq = virq;
-
- if (last)
- *last = entry;
- else
- irq_set_handler_data(irq, entry);
-
- return 0;
-}
-
-static void intc_virq_handler(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- struct intc_virq_list *entry, *vlist = irq_data_get_irq_handler_data(data);
- struct intc_desc_int *d = get_intc_desc(irq);
-
- chip->irq_mask_ack(data);
-
- for_each_virq(entry, vlist) {
- unsigned long addr, handle;
- struct irq_desc *vdesc = irq_to_desc(entry->irq);
-
- if (vdesc) {
- handle = (unsigned long)irq_desc_get_handler_data(vdesc);
- addr = INTC_REG(d, _INTC_ADDR_E(handle), 0);
- if (intc_reg_fns[_INTC_FN(handle)](addr, handle, 0))
- generic_handle_irq_desc(vdesc);
- }
- }
-
- chip->irq_unmask(data);
-}
-
-static unsigned long __init intc_subgroup_data(struct intc_subgroup *subgroup,
- struct intc_desc_int *d,
- unsigned int index)
-{
- unsigned int fn = REG_FN_TEST_BASE + (subgroup->reg_width >> 3) - 1;
-
- return _INTC_MK(fn, MODE_ENABLE_REG, intc_get_reg(d, subgroup->reg),
- 0, 1, (subgroup->reg_width - 1) - index);
-}
-
-static void __init intc_subgroup_init_one(struct intc_desc *desc,
- struct intc_desc_int *d,
- struct intc_subgroup *subgroup)
-{
- struct intc_map_entry *mapped;
- unsigned int pirq;
- unsigned long flags;
- int i;
-
- mapped = radix_tree_lookup(&d->tree, subgroup->parent_id);
- if (!mapped) {
- WARN_ON(1);
- return;
- }
-
- pirq = mapped - intc_irq_xlate;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
- for (i = 0; i < ARRAY_SIZE(subgroup->enum_ids); i++) {
- struct intc_subgroup_entry *entry;
- int err;
-
- if (!subgroup->enum_ids[i])
- continue;
-
- entry = kmalloc(sizeof(*entry), GFP_NOWAIT);
- if (!entry)
- break;
-
- entry->pirq = pirq;
- entry->enum_id = subgroup->enum_ids[i];
- entry->handle = intc_subgroup_data(subgroup, d, i);
-
- err = radix_tree_insert(&d->tree, entry->enum_id, entry);
- if (unlikely(err < 0))
- break;
-
- radix_tree_tag_set(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d)
-{
- int i;
-
- if (!desc->hw.subgroups)
- return;
-
- for (i = 0; i < desc->hw.nr_subgroups; i++)
- intc_subgroup_init_one(desc, d, desc->hw.subgroups + i);
-}
-
-static void __init intc_subgroup_map(struct intc_desc_int *d)
-{
- struct intc_subgroup_entry *entries[32];
- unsigned long flags;
- unsigned int nr_found;
- int i;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
-restart:
- nr_found = radix_tree_gang_lookup_tag_slot(&d->tree,
- (void ***)entries, 0, ARRAY_SIZE(entries),
- INTC_TAG_VIRQ_NEEDS_ALLOC);
-
- for (i = 0; i < nr_found; i++) {
- struct intc_subgroup_entry *entry;
- int irq;
-
- entry = radix_tree_deref_slot((void **)entries[i]);
- if (unlikely(!entry))
- continue;
- if (radix_tree_deref_retry(entry))
- goto restart;
-
- irq = irq_alloc_desc(numa_node_id());
- if (unlikely(irq < 0)) {
- pr_err("no more free IRQs, bailing..\n");
- break;
- }
-
- activate_irq(irq);
-
- pr_info("Setting up a chained VIRQ from %d -> %d\n",
- irq, entry->pirq);
-
- intc_irq_xlate_set(irq, entry->enum_id, d);
-
- irq_set_chip_and_handler_name(irq, irq_get_chip(entry->pirq),
- handle_simple_irq, "virq");
- irq_set_chip_data(irq, irq_get_chip_data(entry->pirq));
-
- irq_set_handler_data(irq, (void *)entry->handle);
-
- /*
- * Set the virtual IRQ as non-threadable.
- */
- irq_set_nothread(irq);
-
- /* Set handler data before installing the handler */
- add_virq_to_pirq(entry->pirq, irq);
- irq_set_chained_handler(entry->pirq, intc_virq_handler);
-
- radix_tree_tag_clear(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- radix_tree_replace_slot(&d->tree, (void **)entries[i],
- &intc_irq_xlate[irq]);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_finalize(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list)
- if (radix_tree_tagged(&d->tree, INTC_TAG_VIRQ_NEEDS_ALLOC))
- intc_subgroup_map(d);
-}
diff --git a/drivers/sh/maple/Makefile b/drivers/sh/maple/Makefile
deleted file mode 100644
index c3a80910c212ce..00000000000000
--- a/drivers/sh/maple/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for Maple Bus
-
-obj-$(CONFIG_MAPLE) := maple.o
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
deleted file mode 100644
index e24e220e56eea1..00000000000000
--- a/drivers/sh/maple/maple.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * Core maple bus functionality
- *
- * Copyright (C) 2007 - 2009 Adrian McMenamin
- * Copyright (C) 2001 - 2008 Paul Mundt
- * Copyright (C) 2000 - 2001 YAEGASHI Takeshi
- * Copyright (C) 2001 M. R. Brown
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/maple.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <mach/dma.h>
-#include <mach/sysasic.h>
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
-MODULE_LICENSE("GPL v2");
-
-static void maple_dma_handler(struct work_struct *work);
-static void maple_vblank_handler(struct work_struct *work);
-
-static DECLARE_WORK(maple_dma_process, maple_dma_handler);
-static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
-
-static LIST_HEAD(maple_waitq);
-static LIST_HEAD(maple_sentq);
-
-/* mutex to protect queue of waiting packets */
-static DEFINE_MUTEX(maple_wlist_lock);
-
-static struct maple_driver maple_unsupported_device;
-static struct device maple_bus;
-static int subdevice_map[MAPLE_PORTS];
-static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
-static unsigned long maple_pnp_time;
-static int started, scanning, fullscan;
-static struct kmem_cache *maple_queue_cache;
-
-struct maple_device_specify {
- int port;
- int unit;
-};
-
-static bool checked[MAPLE_PORTS];
-static bool empty[MAPLE_PORTS];
-static struct maple_device *baseunits[MAPLE_PORTS];
-
-/**
- * maple_driver_register - register a maple driver
- * @drv: maple driver to be registered.
- *
- * Registers the passed in @drv, while updating the bus type.
- * Devices with matching function IDs will be automatically probed.
- */
-int maple_driver_register(struct maple_driver *drv)
-{
- if (!drv)
- return -EINVAL;
-
- drv->drv.bus = &maple_bus_type;
-
- return driver_register(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_register);
-
-/**
- * maple_driver_unregister - unregister a maple driver.
- * @drv: maple driver to unregister.
- *
- * Cleans up after maple_driver_register(). To be invoked in the exit
- * path of any module drivers.
- */
-void maple_driver_unregister(struct maple_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_unregister);
-
-/* set hardware registers to enable next round of dma */
-static void maple_dma_reset(void)
-{
- __raw_writel(MAPLE_MAGIC, MAPLE_RESET);
- /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */
- __raw_writel(1, MAPLE_TRIGTYPE);
- /*
- * Maple system register
- * bits 31 - 16 timeout in units of 20nsec
- * bit 12 hard trigger - set 0 to keep responding to VBLANK
- * bits 9 - 8 set 00 for 2 Mbps, 01 for 1 Mbps
- * bits 3 - 0 delay (in 1.3ms) between VBLANK and start of DMA
- * max delay is 11
- */
- __raw_writel(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED);
- __raw_writel(virt_to_phys(maple_sendbuf), MAPLE_DMAADDR);
- __raw_writel(1, MAPLE_ENABLE);
-}
-
-/**
- * maple_getcond_callback - setup handling MAPLE_COMMAND_GETCOND
- * @dev: device responding
- * @callback: handler callback
- * @interval: interval in jiffies between callbacks
- * @function: the function code for the device
- */
-void maple_getcond_callback(struct maple_device *dev,
- void (*callback) (struct mapleq *mq),
- unsigned long interval, unsigned long function)
-{
- dev->callback = callback;
- dev->interval = interval;
- dev->function = cpu_to_be32(function);
- dev->when = jiffies;
-}
-EXPORT_SYMBOL_GPL(maple_getcond_callback);
-
-static int maple_dma_done(void)
-{
- return (__raw_readl(MAPLE_STATE) & 1) == 0;
-}
-
-static void maple_release_device(struct device *dev)
-{
- struct maple_device *mdev;
- struct mapleq *mq;
-
- mdev = to_maple_dev(dev);
- mq = mdev->mq;
- kmem_cache_free(maple_queue_cache, mq->recvbuf);
- kfree(mq);
- kfree(mdev);
-}
-
-/**
- * maple_add_packet - add a single instruction to the maple bus queue
- * @mdev: maple device
- * @function: function on device being queried
- * @command: maple command to add
- * @length: length of command string (in 32 bit words)
- * @data: remainder of command string
- */
-int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
- size_t length, void *data)
-{
- int ret = 0;
- void *sendbuf = NULL;
-
- if (length) {
- sendbuf = kcalloc(length, 4, GFP_KERNEL);
- if (!sendbuf) {
- ret = -ENOMEM;
- goto out;
- }
- ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
- }
-
- mdev->mq->command = command;
- mdev->mq->length = length;
- if (length > 1)
- memcpy(sendbuf + 4, data, (length - 1) * 4);
- mdev->mq->sendbuf = sendbuf;
-
- mutex_lock(&maple_wlist_lock);
- list_add_tail(&mdev->mq->list, &maple_waitq);
- mutex_unlock(&maple_wlist_lock);
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(maple_add_packet);
-
-static struct mapleq *maple_allocq(struct maple_device *mdev)
-{
- struct mapleq *mq;
-
- mq = kzalloc(sizeof(*mq), GFP_KERNEL);
- if (!mq)
- goto failed_nomem;
-
- INIT_LIST_HEAD(&mq->list);
- mq->dev = mdev;
- mq->recvbuf = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
- if (!mq->recvbuf)
- goto failed_p2;
- mq->recvbuf->buf = &((mq->recvbuf->bufx)[0]);
-
- return mq;
-
-failed_p2:
- kfree(mq);
-failed_nomem:
- dev_err(&mdev->dev, "could not allocate memory for device (%d, %d)\n",
- mdev->port, mdev->unit);
- return NULL;
-}
-
-static struct maple_device *maple_alloc_dev(int port, int unit)
-{
- struct maple_device *mdev;
-
- /* zero this out to avoid kobj subsystem
- * thinking it has already been registered */
-
- mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
- if (!mdev)
- return NULL;
-
- mdev->port = port;
- mdev->unit = unit;
-
- mdev->mq = maple_allocq(mdev);
-
- if (!mdev->mq) {
- kfree(mdev);
- return NULL;
- }
- mdev->dev.bus = &maple_bus_type;
- mdev->dev.parent = &maple_bus;
- init_waitqueue_head(&mdev->maple_wait);
- return mdev;
-}
-
-static void maple_free_dev(struct maple_device *mdev)
-{
- kmem_cache_free(maple_queue_cache, mdev->mq->recvbuf);
- kfree(mdev->mq);
- kfree(mdev);
-}
-
-/* process the command queue into a maple command block
- * terminating command has bit 32 of first long set to 0
- */
-static void maple_build_block(struct mapleq *mq)
-{
- int port, unit, from, to, len;
- unsigned long *lsendbuf = mq->sendbuf;
-
- port = mq->dev->port & 3;
- unit = mq->dev->unit;
- len = mq->length;
- from = port << 6;
- to = (port << 6) | (unit > 0 ? (1 << (unit - 1)) & 0x1f : 0x20);
-
- *maple_lastptr &= 0x7fffffff;
- maple_lastptr = maple_sendptr;
-
- *maple_sendptr++ = (port << 16) | len | 0x80000000;
- *maple_sendptr++ = virt_to_phys(mq->recvbuf->buf);
- *maple_sendptr++ =
- mq->command | (to << 8) | (from << 16) | (len << 24);
- while (len-- > 0)
- *maple_sendptr++ = *lsendbuf++;
-}
-
-/* build up command queue */
-static void maple_send(void)
-{
- int i, maple_packets = 0;
- struct mapleq *mq, *nmq;
-
- if (!maple_dma_done())
- return;
-
- /* disable DMA */
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- mutex_lock(&maple_wlist_lock);
- if (list_empty(&maple_waitq)) {
- mutex_unlock(&maple_wlist_lock);
- goto finish;
- }
-
- maple_lastptr = maple_sendbuf;
- maple_sendptr = maple_sendbuf;
-
- list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
- maple_build_block(mq);
- list_del_init(&mq->list);
- list_add_tail(&mq->list, &maple_sentq);
- if (maple_packets++ > MAPLE_MAXPACKETS)
- break;
- }
- mutex_unlock(&maple_wlist_lock);
- if (maple_packets > 0) {
- for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
- __flush_purge_region(maple_sendbuf + i * PAGE_SIZE,
- PAGE_SIZE);
- }
-
-finish:
- maple_dma_reset();
-}
-
-/* check if there is a driver registered likely to match this device */
-static int maple_check_matching_driver(struct device_driver *driver,
- void *devptr)
-{
- struct maple_driver *maple_drv;
- struct maple_device *mdev;
-
- mdev = devptr;
- maple_drv = to_maple_driver(driver);
- if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static void maple_detach_driver(struct maple_device *mdev)
-{
- device_unregister(&mdev->dev);
-}
-
-/* process initial MAPLE_COMMAND_DEVINFO for each device or port */
-static void maple_attach_driver(struct maple_device *mdev)
-{
- char *p, *recvbuf;
- unsigned long function;
- int matched, error;
-
- recvbuf = mdev->mq->recvbuf->buf;
- /* copy the data as individual elements in
- * case of memory optimisation */
- memcpy(&mdev->devinfo.function, recvbuf + 4, 4);
- memcpy(&mdev->devinfo.function_data[0], recvbuf + 8, 12);
- memcpy(&mdev->devinfo.area_code, recvbuf + 20, 1);
- memcpy(&mdev->devinfo.connector_direction, recvbuf + 21, 1);
- memcpy(&mdev->devinfo.product_name[0], recvbuf + 22, 30);
- memcpy(&mdev->devinfo.standby_power, recvbuf + 112, 2);
- memcpy(&mdev->devinfo.max_power, recvbuf + 114, 2);
- memcpy(mdev->product_name, mdev->devinfo.product_name, 30);
- mdev->product_name[30] = '\0';
- memcpy(mdev->product_licence, mdev->devinfo.product_licence, 60);
- mdev->product_licence[60] = '\0';
-
- for (p = mdev->product_name + 29; mdev->product_name <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
- for (p = mdev->product_licence + 59; mdev->product_licence <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
-
- function = be32_to_cpu(mdev->devinfo.function);
-
- dev_info(&mdev->dev, "detected %s: function 0x%lX: at (%d, %d)\n",
- mdev->product_name, function, mdev->port, mdev->unit);
-
- if (function > 0x200) {
- /* Do this silently - as not a real device */
- function = 0;
- mdev->driver = &maple_unsupported_device;
- dev_set_name(&mdev->dev, "%d:0.port", mdev->port);
- } else {
- matched =
- bus_for_each_drv(&maple_bus_type, NULL, mdev,
- maple_check_matching_driver);
-
- if (matched == 0) {
- /* Driver does not exist yet */
- dev_info(&mdev->dev, "no driver found\n");
- mdev->driver = &maple_unsupported_device;
- }
- dev_set_name(&mdev->dev, "%d:0%d.%lX", mdev->port,
- mdev->unit, function);
- }
-
- mdev->function = function;
- mdev->dev.release = &maple_release_device;
-
- atomic_set(&mdev->busy, 0);
- error = device_register(&mdev->dev);
- if (error) {
- dev_warn(&mdev->dev, "could not register device at"
- " (%d, %d), with error 0x%X\n", mdev->unit,
- mdev->port, error);
- maple_free_dev(mdev);
- mdev = NULL;
- return;
- }
-}
-
-/*
- * if device has been registered for the given
- * port and unit then return 1 - allows identification
- * of which devices need to be attached or detached
- */
-static int check_maple_device(struct device *device, void *portptr)
-{
- struct maple_device_specify *ds;
- struct maple_device *mdev;
-
- ds = portptr;
- mdev = to_maple_dev(device);
- if (mdev->port == ds->port && mdev->unit == ds->unit)
- return 1;
- return 0;
-}
-
-static int setup_maple_commands(struct device *device, void *ignored)
-{
- int add;
- struct maple_device *mdev = to_maple_dev(device);
- if (mdev->interval > 0 && atomic_read(&mdev->busy) == 0 &&
- time_after(jiffies, mdev->when)) {
- /* bounce if we cannot add */
- add = maple_add_packet(mdev,
- be32_to_cpu(mdev->devinfo.function),
- MAPLE_COMMAND_GETCOND, 1, NULL);
- if (!add)
- mdev->when = jiffies + mdev->interval;
- } else {
- if (time_after(jiffies, maple_pnp_time))
- /* Ensure we don't have block reads and devinfo
- * calls interfering with one another - so flag the
- * device as busy */
- if (atomic_read(&mdev->busy) == 0) {
- atomic_set(&mdev->busy, 1);
- maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- }
- }
- return 0;
-}
-
-/* VBLANK bottom half - implemented via workqueue */
-static void maple_vblank_handler(struct work_struct *work)
-{
- int x, locking;
- struct maple_device *mdev;
-
- if (!maple_dma_done())
- return;
-
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- /*
- * Set up essential commands - to fetch data and
- * check devices are still present
- */
- bus_for_each_dev(&maple_bus_type, NULL, NULL,
- setup_maple_commands);
-
- if (time_after(jiffies, maple_pnp_time)) {
- /*
- * Scan the empty ports - bus is flakey and may have
- * mis-reported emptyness
- */
- for (x = 0; x < MAPLE_PORTS; x++) {
- if (checked[x] && empty[x]) {
- mdev = baseunits[x];
- if (!mdev)
- break;
- atomic_set(&mdev->busy, 1);
- locking = maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- if (!locking)
- break;
- }
- }
-
- maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
- }
-
-finish:
- maple_send();
-}
-
-/* handle devices added via hotplugs - placing them on queue for DEVINFO */
-static void maple_map_subunits(struct maple_device *mdev, int submask)
-{
- int retval, k, devcheck;
- struct maple_device *mdev_add;
- struct maple_device_specify ds;
-
- ds.port = mdev->port;
- for (k = 0; k < 5; k++) {
- ds.unit = k + 1;
- retval =
- bus_for_each_dev(&maple_bus_type, NULL, &ds,
- check_maple_device);
- if (retval) {
- submask = submask >> 1;
- continue;
- }
- devcheck = submask & 0x01;
- if (devcheck) {
- mdev_add = maple_alloc_dev(mdev->port, k + 1);
- if (!mdev_add)
- return;
- atomic_set(&mdev_add->busy, 1);
- maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- /* mark that we are checking sub devices */
- scanning = 1;
- }
- submask = submask >> 1;
- }
-}
-
-/* mark a device as removed */
-static void maple_clean_submap(struct maple_device *mdev)
-{
- int killbit;
-
- killbit = (mdev->unit > 0 ? (1 << (mdev->unit - 1)) & 0x1f : 0x20);
- killbit = ~killbit;
- killbit &= 0xFF;
- subdevice_map[mdev->port] = subdevice_map[mdev->port] & killbit;
-}
-
-/* handle empty port or hotplug removal */
-static void maple_response_none(struct maple_device *mdev)
-{
- maple_clean_submap(mdev);
-
- if (likely(mdev->unit != 0)) {
- /*
- * Block devices play up
- * and give the impression they have
- * been removed even when still in place or
- * trip the mtd layer when they have
- * really gone - this code traps that eventuality
- * and ensures we aren't overloaded with useless
- * error messages
- */
- if (mdev->can_unload) {
- if (!mdev->can_unload(mdev)) {
- atomic_set(&mdev->busy, 2);
- wake_up(&mdev->maple_wait);
- return;
- }
- }
-
- dev_info(&mdev->dev, "detaching device at (%d, %d)\n",
- mdev->port, mdev->unit);
- maple_detach_driver(mdev);
- return;
- } else {
- if (!started || !fullscan) {
- if (checked[mdev->port] == false) {
- checked[mdev->port] = true;
- empty[mdev->port] = true;
- dev_info(&mdev->dev, "no devices"
- " to port %d\n", mdev->port);
- }
- return;
- }
- }
- /* Some hardware devices generate false detach messages on unit 0 */
- atomic_set(&mdev->busy, 0);
-}
-
-/* preprocess hotplugs or scans */
-static void maple_response_devinfo(struct maple_device *mdev,
- char *recvbuf)
-{
- char submask;
- if (!started || (scanning == 2) || !fullscan) {
- if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
- checked[mdev->port] = true;
- maple_attach_driver(mdev);
- } else {
- if (mdev->unit != 0)
- maple_attach_driver(mdev);
- if (mdev->unit == 0) {
- empty[mdev->port] = false;
- maple_attach_driver(mdev);
- }
- }
- }
- if (mdev->unit == 0) {
- submask = recvbuf[2] & 0x1F;
- if (submask ^ subdevice_map[mdev->port]) {
- maple_map_subunits(mdev, submask);
- subdevice_map[mdev->port] = submask;
- }
- }
-}
-
-static void maple_response_fileerr(struct maple_device *mdev, void *recvbuf)
-{
- if (mdev->fileerr_handler) {
- mdev->fileerr_handler(mdev, recvbuf);
- return;
- } else
- dev_warn(&mdev->dev, "device at (%d, %d) reports"
- "file error 0x%X\n", mdev->port, mdev->unit,
- ((int *)recvbuf)[1]);
-}
-
-static void maple_port_rescan(void)
-{
- int i;
- struct maple_device *mdev;
-
- fullscan = 1;
- for (i = 0; i < MAPLE_PORTS; i++) {
- if (checked[i] == false) {
- fullscan = 0;
- mdev = baseunits[i];
- maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- }
- }
-}
-
-/* maple dma end bottom half - implemented via workqueue */
-static void maple_dma_handler(struct work_struct *work)
-{
- struct mapleq *mq, *nmq;
- struct maple_device *mdev;
- char *recvbuf;
- enum maple_code code;
-
- if (!maple_dma_done())
- return;
- __raw_writel(0, MAPLE_ENABLE);
- if (!list_empty(&maple_sentq)) {
- list_for_each_entry_safe(mq, nmq, &maple_sentq, list) {
- mdev = mq->dev;
- recvbuf = mq->recvbuf->buf;
- __flush_invalidate_region(sh_cacheop_vaddr(recvbuf),
- 0x400);
- code = recvbuf[0];
- kfree(mq->sendbuf);
- list_del_init(&mq->list);
- switch (code) {
- case MAPLE_RESPONSE_NONE:
- maple_response_none(mdev);
- break;
-
- case MAPLE_RESPONSE_DEVINFO:
- maple_response_devinfo(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_DATATRF:
- if (mdev->callback)
- mdev->callback(mq);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_FILEERR:
- maple_response_fileerr(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_AGAIN:
- case MAPLE_RESPONSE_BADCMD:
- case MAPLE_RESPONSE_BADFUNC:
- dev_warn(&mdev->dev, "non-fatal error"
- " 0x%X at (%d, %d)\n", code,
- mdev->port, mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_ALLINFO:
- dev_notice(&mdev->dev, "extended"
- " device information request for (%d, %d)"
- " but call is not supported\n", mdev->port,
- mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_OK:
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- default:
- break;
- }
- }
- /* if scanning is 1 then we have subdevices to check */
- if (scanning == 1) {
- maple_send();
- scanning = 2;
- } else
- scanning = 0;
- /*check if we have actually tested all ports yet */
- if (!fullscan)
- maple_port_rescan();
- /* mark that we have been through the first scan */
- started = 1;
- }
- maple_send();
-}
-
-static irqreturn_t maple_dma_interrupt(int irq, void *dev_id)
-{
- /* Load everything into the bottom half */
- schedule_work(&maple_dma_process);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t maple_vblank_interrupt(int irq, void *dev_id)
-{
- schedule_work(&maple_vblank_process);
- return IRQ_HANDLED;
-}
-
-static int maple_set_dma_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_MAPLE_DMA, maple_dma_interrupt,
- IRQF_SHARED, "maple bus DMA", &maple_unsupported_device);
-}
-
-static int maple_set_vblank_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_VSYNC, maple_vblank_interrupt,
- IRQF_SHARED, "maple bus VBLANK", &maple_unsupported_device);
-}
-
-static int maple_get_dma_buffer(void)
-{
- maple_sendbuf =
- (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
- MAPLE_DMA_PAGES);
- if (!maple_sendbuf)
- return -ENOMEM;
- return 0;
-}
-
-static int maple_match_bus_driver(struct device *devptr,
- struct device_driver *drvptr)
-{
- struct maple_driver *maple_drv = to_maple_driver(drvptr);
- struct maple_device *maple_dev = to_maple_dev(devptr);
-
- /* Trap empty port case */
- if (maple_dev->devinfo.function == 0xFFFFFFFF)
- return 0;
- else if (maple_dev->devinfo.function &
- cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static int maple_bus_uevent(struct device *dev,
- struct kobj_uevent_env *env)
-{
- return 0;
-}
-
-static void maple_bus_release(struct device *dev)
-{
-}
-
-static struct maple_driver maple_unsupported_device = {
- .drv = {
- .name = "maple_unsupported_device",
- .bus = &maple_bus_type,
- },
-};
-/*
- * maple_bus_type - core maple bus structure
- */
-struct bus_type maple_bus_type = {
- .name = "maple",
- .match = maple_match_bus_driver,
- .uevent = maple_bus_uevent,
-};
-EXPORT_SYMBOL_GPL(maple_bus_type);
-
-static struct device maple_bus = {
- .init_name = "maple",
- .release = maple_bus_release,
-};
-
-static int __init maple_bus_init(void)
-{
- int retval, i;
- struct maple_device *mdev[MAPLE_PORTS];
-
- __raw_writel(0, MAPLE_ENABLE);
-
- retval = device_register(&maple_bus);
- if (retval)
- goto cleanup;
-
- retval = bus_register(&maple_bus_type);
- if (retval)
- goto cleanup_device;
-
- retval = driver_register(&maple_unsupported_device.drv);
- if (retval)
- goto cleanup_bus;
-
- /* allocate memory for maple bus dma */
- retval = maple_get_dma_buffer();
- if (retval) {
- dev_err(&maple_bus, "failed to allocate DMA buffers\n");
- goto cleanup_basic;
- }
-
- /* set up DMA interrupt handler */
- retval = maple_set_dma_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab maple "
- "DMA IRQ\n");
- goto cleanup_dma;
- }
-
- /* set up VBLANK interrupt handler */
- retval = maple_set_vblank_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab VBLANK IRQ\n");
- goto cleanup_irq;
- }
-
- maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
-
- if (!maple_queue_cache) {
- retval = -ENOMEM;
- goto cleanup_bothirqs;
- }
-
- INIT_LIST_HEAD(&maple_waitq);
- INIT_LIST_HEAD(&maple_sentq);
-
- /* setup maple ports */
- for (i = 0; i < MAPLE_PORTS; i++) {
- checked[i] = false;
- empty[i] = false;
- mdev[i] = maple_alloc_dev(i, 0);
- if (!mdev[i]) {
- while (i-- > 0)
- maple_free_dev(mdev[i]);
- retval = -ENOMEM;
- goto cleanup_cache;
- }
- baseunits[i] = mdev[i];
- atomic_set(&mdev[i]->busy, 1);
- maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
- subdevice_map[i] = 0;
- }
-
- maple_pnp_time = jiffies + HZ;
- /* prepare initial queue */
- maple_send();
- dev_info(&maple_bus, "bus core now registered\n");
-
- return 0;
-
-cleanup_cache:
- kmem_cache_destroy(maple_queue_cache);
-
-cleanup_bothirqs:
- free_irq(HW_EVENT_VSYNC, 0);
-
-cleanup_irq:
- free_irq(HW_EVENT_MAPLE_DMA, 0);
-
-cleanup_dma:
- free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES);
-
-cleanup_basic:
- driver_unregister(&maple_unsupported_device.drv);
-
-cleanup_bus:
- bus_unregister(&maple_bus_type);
-
-cleanup_device:
- device_unregister(&maple_bus);
-
-cleanup:
- printk(KERN_ERR "Maple bus registration failed\n");
- return retval;
-}
-/* Push init to later to ensure hardware gets detected */
-fs_initcall(maple_bus_init);
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
deleted file mode 100644
index c887ecdaf19b7c..00000000000000
--- a/drivers/sh/pm_runtime.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Runtime PM support code
- *
- * Copyright (C) 2009-2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-
-static struct dev_pm_domain default_pm_domain = {
- .ops = {
- USE_PM_CLK_RUNTIME_OPS
- USE_PLATFORM_PM_SLEEP_OPS
- },
-};
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
- .pm_domain = &default_pm_domain,
- .con_ids = { NULL, },
-};
-
-static int __init sh_pm_runtime_init(void)
-{
- pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
- return 0;
-}
-core_initcall(sh_pm_runtime_init);
diff --git a/drivers/sh/superhyway/Makefile b/drivers/sh/superhyway/Makefile
deleted file mode 100644
index 6dfa41f160af6b..00000000000000
--- a/drivers/sh/superhyway/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the SuperHyway bus drivers.
-#
-
-obj-$(CONFIG_SUPERHYWAY) += superhyway.o
-obj-$(CONFIG_SYSFS) += superhyway-sysfs.o
-
diff --git a/drivers/sh/superhyway/superhyway-sysfs.c b/drivers/sh/superhyway/superhyway-sysfs.c
deleted file mode 100644
index 774f31b564f8f8..00000000000000
--- a/drivers/sh/superhyway/superhyway-sysfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway-sysfs.c
- *
- * SuperHyway Bus sysfs interface
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/superhyway.h>
-
-#define superhyway_ro_attr(name, fmt, field) \
-static ssize_t name##_show(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct superhyway_device *s = to_superhyway_device(dev); \
- return sprintf(buf, fmt, s->field); \
-} \
-static DEVICE_ATTR_RO(name);
-
-/* VCR flags */
-superhyway_ro_attr(perr_flags, "0x%02x\n", vcr.perr_flags);
-superhyway_ro_attr(merr_flags, "0x%02x\n", vcr.merr_flags);
-superhyway_ro_attr(mod_vers, "0x%04x\n", vcr.mod_vers);
-superhyway_ro_attr(mod_id, "0x%04x\n", vcr.mod_id);
-superhyway_ro_attr(bot_mb, "0x%02x\n", vcr.bot_mb);
-superhyway_ro_attr(top_mb, "0x%02x\n", vcr.top_mb);
-
-/* Misc */
-superhyway_ro_attr(resource, "0x%08lx\n", resource[0].start);
-
-static struct attribute *superhyway_dev_attrs[] = {
- &dev_attr_perr_flags.attr,
- &dev_attr_merr_flags.attr,
- &dev_attr_mod_vers.attr,
- &dev_attr_mod_id.attr,
- &dev_attr_bot_mb.attr,
- &dev_attr_top_mb.attr,
- &dev_attr_resource.attr,
- NULL,
-};
-
-static const struct attribute_group superhyway_dev_group = {
- .attrs = superhyway_dev_attrs,
-};
-
-const struct attribute_group *superhyway_dev_groups[] = {
- &superhyway_dev_group,
- NULL,
-};
diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c
deleted file mode 100644
index 44324abe21dada..00000000000000
--- a/drivers/sh/superhyway/superhyway.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway.c
- *
- * SuperHyway Bus Driver
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-static int superhyway_devices;
-
-static struct device superhyway_bus_device = {
- .init_name = "superhyway",
-};
-
-static void superhyway_device_release(struct device *dev)
-{
- struct superhyway_device *sdev = to_superhyway_device(dev);
-
- kfree(sdev->resource);
- kfree(sdev);
-}
-
-/**
- * superhyway_add_device - Add a SuperHyway module
- * @base: Physical address where module is mapped.
- * @sdev: SuperHyway device to add, or NULL to allocate a new one.
- * @bus: Bus where SuperHyway module resides.
- *
- * This is responsible for adding a new SuperHyway module. This sets up a new
- * struct superhyway_device for the module being added if @sdev == NULL.
- *
- * Devices are initially added in the order that they are scanned (from the
- * top-down of the memory map), and are assigned an ID based on the order that
- * they are added. Any manual addition of a module will thus get the ID after
- * the devices already discovered regardless of where it resides in memory.
- *
- * Further work can and should be done in superhyway_scan_bus(), to be sure
- * that any new modules are properly discovered and subsequently registered.
- */
-int superhyway_add_device(unsigned long base, struct superhyway_device *sdev,
- struct superhyway_bus *bus)
-{
- struct superhyway_device *dev = sdev;
-
- if (!dev) {
- dev = kzalloc(sizeof(struct superhyway_device), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- }
-
- dev->bus = bus;
- superhyway_read_vcr(dev, base, &dev->vcr);
-
- if (!dev->resource) {
- dev->resource = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!dev->resource) {
- kfree(dev);
- return -ENOMEM;
- }
-
- dev->resource->name = dev->name;
- dev->resource->start = base;
- dev->resource->end = dev->resource->start + 0x01000000;
- }
-
- dev->dev.parent = &superhyway_bus_device;
- dev->dev.bus = &superhyway_bus_type;
- dev->dev.release = superhyway_device_release;
- dev->id.id = dev->vcr.mod_id;
-
- sprintf(dev->name, "SuperHyway device %04x", dev->id.id);
- dev_set_name(&dev->dev, "%02x", superhyway_devices);
-
- superhyway_devices++;
-
- return device_register(&dev->dev);
-}
-
-int superhyway_add_devices(struct superhyway_bus *bus,
- struct superhyway_device **devices,
- int nr_devices)
-{
- int i, ret = 0;
-
- for (i = 0; i < nr_devices; i++) {
- struct superhyway_device *dev = devices[i];
- ret |= superhyway_add_device(dev->resource[0].start, dev, bus);
- }
-
- return ret;
-}
-
-static int __init superhyway_init(void)
-{
- struct superhyway_bus *bus;
- int ret;
-
- ret = device_register(&superhyway_bus_device);
- if (unlikely(ret))
- return ret;
-
- for (bus = superhyway_channels; bus->ops; bus++)
- ret |= superhyway_scan_bus(bus);
-
- return ret;
-}
-postcore_initcall(superhyway_init);
-
-static const struct superhyway_device_id *
-superhyway_match_id(const struct superhyway_device_id *ids,
- struct superhyway_device *dev)
-{
- while (ids->id) {
- if (ids->id == dev->id.id)
- return ids;
-
- ids++;
- }
-
- return NULL;
-}
-
-static int superhyway_device_probe(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv && shyway_drv->probe) {
- const struct superhyway_device_id *id;
-
- id = superhyway_match_id(shyway_drv->id_table, shyway_dev);
- if (id)
- return shyway_drv->probe(shyway_dev, id);
- }
-
- return -ENODEV;
-}
-
-static void superhyway_device_remove(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv->remove)
- shyway_drv->remove(shyway_dev);
-}
-
-/**
- * superhyway_register_driver - Register a new SuperHyway driver
- * @drv: SuperHyway driver to register.
- *
- * This registers the passed in @drv. Any devices matching the id table will
- * automatically be populated and handed off to the driver's specified probe
- * routine.
- */
-int superhyway_register_driver(struct superhyway_driver *drv)
-{
- drv->drv.name = drv->name;
- drv->drv.bus = &superhyway_bus_type;
-
- return driver_register(&drv->drv);
-}
-
-/**
- * superhyway_unregister_driver - Unregister a SuperHyway driver
- * @drv: SuperHyway driver to unregister.
- *
- * This cleans up after superhyway_register_driver(), and should be invoked in
- * the exit path of any module drivers.
- */
-void superhyway_unregister_driver(struct superhyway_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-
-static int superhyway_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(drv);
- const struct superhyway_device_id *ids = shyway_drv->id_table;
-
- if (!ids)
- return -EINVAL;
- if (superhyway_match_id(ids, shyway_dev))
- return 1;
-
- return -ENODEV;
-}
-
-struct bus_type superhyway_bus_type = {
- .name = "superhyway",
- .match = superhyway_bus_match,
-#ifdef CONFIG_SYSFS
- .dev_groups = superhyway_dev_groups,
-#endif
- .probe = superhyway_device_probe,
- .remove = superhyway_device_remove,
-};
-
-static int __init superhyway_bus_init(void)
-{
- return bus_register(&superhyway_bus_type);
-}
-
-static void __exit superhyway_bus_exit(void)
-{
- device_unregister(&superhyway_bus_device);
- bus_unregister(&superhyway_bus_type);
-}
-
-core_initcall(superhyway_bus_init);
-module_exit(superhyway_bus_exit);
-
-EXPORT_SYMBOL(superhyway_bus_type);
-EXPORT_SYMBOL(superhyway_add_device);
-EXPORT_SYMBOL(superhyway_add_devices);
-EXPORT_SYMBOL(superhyway_register_driver);
-EXPORT_SYMBOL(superhyway_unregister_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
deleted file mode 100644
index 7bed5be886c657..00000000000000
--- a/include/linux/sh_clk.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SH_CLOCK_H
-#define __SH_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-#include <linux/kref.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-struct clk;
-
-struct clk_mapping {
- phys_addr_t phys;
- void __iomem *base;
- unsigned long len;
- struct kref ref;
-};
-
-struct sh_clk_ops {
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- void (*init)(struct clk *clk);
-#endif
- int (*enable)(struct clk *clk);
- void (*disable)(struct clk *clk);
- unsigned long (*recalc)(struct clk *clk);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*set_parent)(struct clk *clk, struct clk *parent);
- long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1)
-#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4)
-#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6)
-
-struct clk {
- struct list_head node;
- struct clk *parent;
- struct clk **parent_table; /* list of parents to */
- unsigned short parent_num; /* choose between */
- unsigned char src_shift; /* source clock field in the */
- unsigned char src_width; /* configuration register */
- struct sh_clk_ops *ops;
-
- struct list_head children;
- struct list_head sibling; /* node for children */
-
- int usecount;
-
- unsigned long rate;
- unsigned long flags;
-
- void __iomem *enable_reg;
- void __iomem *status_reg;
- unsigned int enable_bit;
- void __iomem *mapped_reg;
-
- unsigned int div_mask;
- unsigned long arch_flags;
- void *priv;
- struct clk_mapping *mapping;
- struct cpufreq_frequency_table *freq_table;
- unsigned int nr_freqs;
-};
-
-#define CLK_ENABLE_ON_INIT BIT(0)
-
-#define CLK_ENABLE_REG_32BIT BIT(1) /* default access size */
-#define CLK_ENABLE_REG_16BIT BIT(2)
-#define CLK_ENABLE_REG_8BIT BIT(3)
-
-#define CLK_MASK_DIV_ON_DISABLE BIT(4)
-
-#define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \
- CLK_ENABLE_REG_16BIT | \
- CLK_ENABLE_REG_8BIT)
-
-/* drivers/sh/clk.c */
-unsigned long followparent_recalc(struct clk *);
-void recalculate_root_clocks(void);
-void propagate_rate(struct clk *);
-int clk_reparent(struct clk *child, struct clk *parent);
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-void clk_enable_init_clocks(void);
-
-struct clk_div_mult_table {
- unsigned int *divisors;
- unsigned int nr_divisors;
- unsigned int *multipliers;
- unsigned int nr_multipliers;
-};
-
-struct cpufreq_frequency_table;
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap);
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate);
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate);
-
-#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _status_reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_enable_reg, \
- .enable_bit = _enable_bit, \
- .status_reg = _status_reg, \
- .flags = _flags, \
-}
-
-#define SH_CLK_MSTP32(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP32_STS(_p, _r, _b, _s, _f) \
- SH_CLK_MSTP(_p, _r, _b, _s, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP16(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_16BIT)
-
-#define SH_CLK_MSTP8(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_8BIT)
-
-int sh_clk_mstp_register(struct clk *clks, int nr);
-
-/*
- * MSTP registration never really cared about access size, despite the
- * original enable/disable pairs assuming a 32-bit access. Clocks are
- * responsible for defining their access sizes either directly or via the
- * clock definition wrappers.
- */
-static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr)
-{
- return sh_clk_mstp_register(clks, nr);
-}
-
-#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = _shift, \
- .arch_flags = _div_bitmap, \
- .div_mask = SH_CLK_DIV4_MSK, \
- .flags = _flags, \
-}
-
-struct clk_div_table {
- struct clk_div_mult_table *div_mult_table;
- void (*kick)(struct clk *clk);
-};
-
-#define clk_div4_table clk_div_table
-
-int sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-
-#define SH_CLK_DIV6_EXT(_reg, _flags, _parents, \
- _num_parents, _src_shift, _src_width) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
- .div_mask = SH_CLK_DIV6_MSK, \
- .parent_table = _parents, \
- .parent_num = _num_parents, \
- .src_shift = _src_shift, \
- .src_width = _src_width, \
-}
-
-#define SH_CLK_DIV6(_parent, _reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .div_mask = SH_CLK_DIV6_MSK, \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
-}
-
-int sh_clk_div6_register(struct clk *clks, int nr);
-int sh_clk_div6_reparent_register(struct clk *clks, int nr);
-
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
-/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */
-#define SH_CLK_FSIDIV(_reg, _parent) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .parent = _parent, \
-}
-
-int sh_clk_fsidiv_register(struct clk *clks, int nr);
-
-#endif /* __SH_CLOCK_H */
diff --git a/include/linux/superhyway.h b/include/linux/superhyway.h
deleted file mode 100644
index 8d3376775813d3..00000000000000
--- a/include/linux/superhyway.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/linux/superhyway.h
- *
- * SuperHyway Bus definitions
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __LINUX_SUPERHYWAY_H
-#define __LINUX_SUPERHYWAY_H
-
-#include <linux/device.h>
-
-/*
- * SuperHyway IDs
- */
-#define SUPERHYWAY_DEVICE_ID_SH5_DMAC 0x0183
-
-struct superhyway_vcr_info {
- u8 perr_flags; /* P-port Error flags */
- u8 merr_flags; /* Module Error flags */
- u16 mod_vers; /* Module Version */
- u16 mod_id; /* Module ID */
- u8 bot_mb; /* Bottom Memory block */
- u8 top_mb; /* Top Memory block */
-};
-
-struct superhyway_ops {
- int (*read_vcr)(unsigned long base, struct superhyway_vcr_info *vcr);
- int (*write_vcr)(unsigned long base, struct superhyway_vcr_info vcr);
-};
-
-struct superhyway_bus {
- struct superhyway_ops *ops;
-};
-
-extern struct superhyway_bus superhyway_channels[];
-
-struct superhyway_device_id {
- unsigned int id;
- unsigned long driver_data;
-};
-
-struct superhyway_device;
-extern struct bus_type superhyway_bus_type;
-
-struct superhyway_driver {
- char *name;
-
- const struct superhyway_device_id *id_table;
- struct device_driver drv;
-
- int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
- void (*remove)(struct superhyway_device *dev);
-};
-
-#define to_superhyway_driver(d) container_of((d), struct superhyway_driver, drv)
-
-struct superhyway_device {
- char name[32];
-
- struct device dev;
-
- struct superhyway_device_id id;
- struct superhyway_driver *drv;
- struct superhyway_bus *bus;
-
- int num_resources;
- struct resource *resource;
- struct superhyway_vcr_info vcr;
-};
-
-#define to_superhyway_device(d) container_of((d), struct superhyway_device, dev)
-
-#define superhyway_get_drvdata(d) dev_get_drvdata(&(d)->dev)
-#define superhyway_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p))
-
-static inline int
-superhyway_read_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info *vcr)
-{
- return dev->bus->ops->read_vcr(base, vcr);
-}
-
-static inline int
-superhyway_write_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info vcr)
-{
- return dev->bus->ops->write_vcr(base, vcr);
-}
-
-extern int superhyway_scan_bus(struct superhyway_bus *);
-
-/* drivers/sh/superhyway/superhyway.c */
-int superhyway_register_driver(struct superhyway_driver *);
-void superhyway_unregister_driver(struct superhyway_driver *);
-int superhyway_add_device(unsigned long base, struct superhyway_device *, struct superhyway_bus *);
-int superhyway_add_devices(struct superhyway_bus *bus, struct superhyway_device **devices, int nr_devices);
-
-/* drivers/sh/superhyway/superhyway-sysfs.c */
-extern const struct attribute_group *superhyway_dev_groups[];
-
-#endif /* __LINUX_SUPERHYWAY_H */
-
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 14/22] remove drivers/sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed these drivers are dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/Makefile | 1 -
drivers/sh/Kconfig | 6 -
drivers/sh/Makefile | 12 -
drivers/sh/clk/Makefile | 4 -
drivers/sh/clk/core.c | 624 ----------------
drivers/sh/clk/cpg.c | 477 ------------
drivers/sh/intc/Kconfig | 44 --
drivers/sh/intc/Makefile | 6 -
drivers/sh/intc/access.c | 246 -------
drivers/sh/intc/balancing.c | 97 ---
drivers/sh/intc/chip.c | 211 ------
drivers/sh/intc/core.c | 501 -------------
drivers/sh/intc/handle.c | 306 --------
drivers/sh/intc/internals.h | 191 -----
drivers/sh/intc/irqdomain.c | 68 --
drivers/sh/intc/userimask.c | 84 ---
drivers/sh/intc/virq-debugfs.c | 54 --
drivers/sh/intc/virq.c | 269 -------
drivers/sh/maple/Makefile | 4 -
drivers/sh/maple/maple.c | 895 -----------------------
drivers/sh/pm_runtime.c | 40 -
drivers/sh/superhyway/Makefile | 8 -
drivers/sh/superhyway/superhyway-sysfs.c | 54 --
drivers/sh/superhyway/superhyway.c | 234 ------
include/linux/sh_clk.h | 213 ------
include/linux/superhyway.h | 107 ---
26 files changed, 4756 deletions(-)
delete mode 100644 drivers/sh/Kconfig
delete mode 100644 drivers/sh/Makefile
delete mode 100644 drivers/sh/clk/Makefile
delete mode 100644 drivers/sh/clk/core.c
delete mode 100644 drivers/sh/clk/cpg.c
delete mode 100644 drivers/sh/intc/Kconfig
delete mode 100644 drivers/sh/intc/Makefile
delete mode 100644 drivers/sh/intc/access.c
delete mode 100644 drivers/sh/intc/balancing.c
delete mode 100644 drivers/sh/intc/chip.c
delete mode 100644 drivers/sh/intc/core.c
delete mode 100644 drivers/sh/intc/handle.c
delete mode 100644 drivers/sh/intc/internals.h
delete mode 100644 drivers/sh/intc/irqdomain.c
delete mode 100644 drivers/sh/intc/userimask.c
delete mode 100644 drivers/sh/intc/virq-debugfs.c
delete mode 100644 drivers/sh/intc/virq.c
delete mode 100644 drivers/sh/maple/Makefile
delete mode 100644 drivers/sh/maple/maple.c
delete mode 100644 drivers/sh/pm_runtime.c
delete mode 100644 drivers/sh/superhyway/Makefile
delete mode 100644 drivers/sh/superhyway/superhyway-sysfs.c
delete mode 100644 drivers/sh/superhyway/superhyway.c
delete mode 100644 include/linux/sh_clk.h
delete mode 100644 include/linux/superhyway.h
diff --git a/drivers/Makefile b/drivers/Makefile
index bdf1c66141c9bd..b97a69a4c40b91 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,7 +134,6 @@ obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
-obj-$(CONFIG_SUPERH) += sh/
obj-y += clocksource/
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
diff --git a/drivers/sh/Kconfig b/drivers/sh/Kconfig
deleted file mode 100644
index 3588fcc9c0d23b..00000000000000
--- a/drivers/sh/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "SuperH / SH-Mobile Driver Options"
-
-source "drivers/sh/intc/Kconfig"
-
-endmenu
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
deleted file mode 100644
index c53262835e85e2..00000000000000
--- a/drivers/sh/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH specific drivers.
-#
-obj-$(CONFIG_SH_INTC) += intc/
-ifneq ($(CONFIG_COMMON_CLK),y)
-obj-$(CONFIG_HAVE_CLK) += clk/
-endif
-obj-$(CONFIG_MAPLE) += maple/
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-
-obj-y += pm_runtime.o
diff --git a/drivers/sh/clk/Makefile b/drivers/sh/clk/Makefile
deleted file mode 100644
index 0158ff3ba9d544..00000000000000
--- a/drivers/sh/clk/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := core.o
-
-obj-$(CONFIG_SH_CLK_CPG) += cpg.o
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
deleted file mode 100644
index d996782a710642..00000000000000
--- a/drivers/sh/clk/core.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * SuperH clock framework
- *
- * Copyright (C) 2005 - 2010 Paul Mundt
- *
- * This clock framework is derived from the OMAP version by:
- *
- * Copyright (C) 2004 - 2008 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "clock: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/syscore_ops.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* clock disable operations are not passed on to hardware during boot */
-static int allow_disable;
-
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap)
-{
- unsigned long mult, div;
- unsigned long freq;
- int i;
-
- clk->nr_freqs = nr_freqs;
-
- for (i = 0; i < nr_freqs; i++) {
- div = 1;
- mult = 1;
-
- if (src_table->divisors && i < src_table->nr_divisors)
- div = src_table->divisors[i];
-
- if (src_table->multipliers && i < src_table->nr_multipliers)
- mult = src_table->multipliers[i];
-
- if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
- freq = CPUFREQ_ENTRY_INVALID;
- else
- freq = clk->parent->rate * mult / div;
-
- freq_table[i].driver_data = i;
- freq_table[i].frequency = freq;
- }
-
- /* Termination entry */
- freq_table[i].driver_data = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-}
-
-struct clk_rate_round_data;
-
-struct clk_rate_round_data {
- unsigned long rate;
- unsigned int min, max;
- long (*func)(unsigned int, struct clk_rate_round_data *);
- void *arg;
-};
-
-#define for_each_frequency(pos, r, freq) \
- for (pos = r->min, freq = r->func(pos, r); \
- pos <= r->max; pos++, freq = r->func(pos, r)) \
- if (unlikely(freq == 0)) \
- ; \
- else
-
-static long clk_rate_round_helper(struct clk_rate_round_data *rounder)
-{
- unsigned long rate_error, rate_error_prev = ~0UL;
- unsigned long highest, lowest, freq;
- long rate_best_fit = -ENOENT;
- int i;
-
- highest = 0;
- lowest = ~0UL;
-
- for_each_frequency(i, rounder, freq) {
- if (freq > highest)
- highest = freq;
- if (freq < lowest)
- lowest = freq;
-
- rate_error = abs(freq - rounder->rate);
- if (rate_error < rate_error_prev) {
- rate_best_fit = freq;
- rate_error_prev = rate_error;
- }
-
- if (rate_error == 0)
- break;
- }
-
- if (rounder->rate >= highest)
- rate_best_fit = highest;
- if (rounder->rate <= lowest)
- rate_best_fit = lowest;
-
- return rate_best_fit;
-}
-
-static long clk_rate_table_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- struct cpufreq_frequency_table *freq_table = rounder->arg;
- unsigned long freq = freq_table[pos].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- freq = 0;
-
- return freq;
-}
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct clk_rate_round_data table_round = {
- .min = 0,
- .max = clk->nr_freqs - 1,
- .func = clk_rate_table_iter,
- .arg = freq_table,
- .rate = rate,
- };
-
- if (clk->nr_freqs < 1)
- return -ENOSYS;
-
- return clk_rate_round_helper(&table_round);
-}
-
-static long clk_rate_div_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) / pos;
-}
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate)
-{
- struct clk_rate_round_data div_range_round = {
- .min = div_min,
- .max = div_max,
- .func = clk_rate_div_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&div_range_round);
-}
-
-static long clk_rate_mult_range_iter(unsigned int pos,
- struct clk_rate_round_data *rounder)
-{
- return clk_get_rate(rounder->arg) * pos;
-}
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate)
-{
- struct clk_rate_round_data mult_range_round = {
- .min = mult_min,
- .max = mult_max,
- .func = clk_rate_mult_range_iter,
- .arg = clk_get_parent(clk),
- .rate = rate,
- };
-
- return clk_rate_round_helper(&mult_range_round);
-}
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate)
-{
- struct cpufreq_frequency_table *pos;
- int idx;
-
- cpufreq_for_each_valid_entry_idx(pos, freq_table, idx)
- if (pos->frequency == rate)
- return idx;
-
- return -ENOENT;
-}
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent ? clk->parent->rate : 0;
-}
-
-int clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- return 0;
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
-
- propagate_rate(clkp);
- }
-}
-
-static void __clk_disable(struct clk *clk)
-{
- if (WARN(!clk->usecount, "Trying to disable clock %p with 0 usecount\n",
- clk))
- return;
-
- if (!(--clk->usecount)) {
- if (likely(allow_disable && clk->ops && clk->ops->disable))
- clk->ops->disable(clk);
- if (likely(clk->parent))
- __clk_disable(clk->parent);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (!clk)
- return;
-
- spin_lock_irqsave(&clock_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount++ == 0) {
- if (clk->parent) {
- ret = __clk_enable(clk->parent);
- if (unlikely(ret))
- goto err;
- }
-
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->parent)
- __clk_disable(clk->parent);
- goto err;
- }
- }
- }
-
- return ret;
-err:
- clk->usecount--;
- return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (!clk)
- return -EINVAL;
-
- spin_lock_irqsave(&clock_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->ops && clkp->ops->recalc)
- clkp->rate = clkp->ops->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static struct clk_mapping dummy_mapping;
-
-static struct clk *lookup_root_clock(struct clk *clk)
-{
- while (clk->parent)
- clk = clk->parent;
-
- return clk;
-}
-
-static int clk_establish_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /*
- * Propagate mappings.
- */
- if (!mapping) {
- struct clk *clkp;
-
- /*
- * dummy mapping for root clocks with no specified ranges
- */
- if (!clk->parent) {
- clk->mapping = &dummy_mapping;
- goto out;
- }
-
- /*
- * If we're on a child clock and it provides no mapping of its
- * own, inherit the mapping from its root clock.
- */
- clkp = lookup_root_clock(clk);
- mapping = clkp->mapping;
- BUG_ON(!mapping);
- }
-
- /*
- * Establish initial mapping.
- */
- if (!mapping->base && mapping->phys) {
- kref_init(&mapping->ref);
-
- mapping->base = ioremap(mapping->phys, mapping->len);
- if (unlikely(!mapping->base))
- return -ENXIO;
- } else if (mapping->base) {
- /*
- * Bump the refcount for an existing mapping
- */
- kref_get(&mapping->ref);
- }
-
- clk->mapping = mapping;
-out:
- clk->mapped_reg = clk->mapping->base;
- clk->mapped_reg += (phys_addr_t)clk->enable_reg - clk->mapping->phys;
- return 0;
-}
-
-static void clk_destroy_mapping(struct kref *kref)
-{
- struct clk_mapping *mapping;
-
- mapping = container_of(kref, struct clk_mapping, ref);
-
- iounmap(mapping->base);
-}
-
-static void clk_teardown_mapping(struct clk *clk)
-{
- struct clk_mapping *mapping = clk->mapping;
-
- /* Nothing to do */
- if (mapping == &dummy_mapping)
- goto out;
-
- kref_put(&mapping->ref, clk_destroy_mapping);
- clk->mapping = NULL;
-out:
- clk->mapped_reg = NULL;
-}
-
-int clk_register(struct clk *clk)
-{
- int ret;
-
- if (IS_ERR_OR_NULL(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clock_list_sem);
-
- INIT_LIST_HEAD(&clk->children);
- clk->usecount = 0;
-
- ret = clk_establish_mapping(clk);
- if (unlikely(ret))
- goto out_unlock;
-
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clock_list);
-
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- if (clk->ops && clk->ops->init)
- clk->ops->init(clk);
-#endif
-
-out_unlock:
- mutex_unlock(&clock_list_sem);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- mutex_lock(&clock_list_sem);
- list_del(&clk->sibling);
- list_del(&clk->node);
- clk_teardown_mapping(clk);
- mutex_unlock(&clock_list_sem);
-}
-EXPORT_SYMBOL_GPL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node)
- if (clkp->flags & CLK_ENABLE_ON_INIT)
- clk_enable(clkp);
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0;
-
- return clk->rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EOPNOTSUPP;
- unsigned long flags;
-
- if (!clk)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
-
- if (likely(clk->ops && clk->ops->set_rate)) {
- ret = clk->ops->set_rate(clk, rate);
- if (ret != 0)
- goto out_unlock;
- } else {
- clk->rate = rate;
- ret = 0;
- }
-
- if (clk->ops && clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
-
- propagate_rate(clk);
-
-out_unlock:
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!parent || !clk)
- return ret;
- if (clk->parent == parent)
- return 0;
-
- spin_lock_irqsave(&clock_lock, flags);
- if (clk->usecount == 0) {
- if (clk->ops->set_parent)
- ret = clk->ops->set_parent(clk, parent);
- else
- ret = clk_reparent(clk, parent);
-
- if (ret == 0) {
- if (clk->ops->recalc)
- clk->rate = clk->ops->recalc(clk);
- pr_debug("set parent of %p to %p (new rate %ld)\n",
- clk, clk->parent, clk->rate);
- propagate_rate(clk);
- }
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
-
- if (likely(clk->ops && clk->ops->round_rate)) {
- unsigned long flags, rounded;
-
- spin_lock_irqsave(&clock_lock, flags);
- rounded = clk->ops->round_rate(clk, rate);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return rounded;
- }
-
- return clk_get_rate(clk);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-#ifdef CONFIG_PM
-static void clks_core_resume(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->usecount && clkp->ops)) {
- unsigned long rate = clkp->rate;
-
- if (likely(clkp->ops->set_parent))
- clkp->ops->set_parent(clkp,
- clkp->parent);
- if (likely(clkp->ops->set_rate))
- clkp->ops->set_rate(clkp, rate);
- else if (likely(clkp->ops->recalc))
- clkp->rate = clkp->ops->recalc(clkp);
- }
- }
-}
-
-static struct syscore_ops clks_syscore_ops = {
- .resume = clks_core_resume,
-};
-
-static int __init clk_syscore_init(void)
-{
- register_syscore_ops(&clks_syscore_ops);
-
- return 0;
-}
-subsys_initcall(clk_syscore_init);
-#endif
-
-static int __init clk_late_init(void)
-{
- unsigned long flags;
- struct clk *clk;
-
- /* disable all clocks with zero use count */
- mutex_lock(&clock_list_sem);
- spin_lock_irqsave(&clock_lock, flags);
-
- list_for_each_entry(clk, &clock_list, node)
- if (!clk->usecount && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- /* from now on allow clock disable operations */
- allow_disable = 1;
-
- spin_unlock_irqrestore(&clock_lock, flags);
- mutex_unlock(&clock_list_sem);
- return 0;
-}
-late_initcall(clk_late_init);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
deleted file mode 100644
index fd72d9088bdcbc..00000000000000
--- a/drivers/sh/clk/cpg.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Helper routines for SuperH Clock Pulse Generator blocks (CPG).
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-
-#define CPG_CKSTP_BIT BIT(8)
-
-static unsigned int sh_clk_read(struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- return ioread8(clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- return ioread16(clk->mapped_reg);
-
- return ioread32(clk->mapped_reg);
-}
-
-static void sh_clk_write(int value, struct clk *clk)
-{
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- iowrite8(value, clk->mapped_reg);
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- iowrite16(value, clk->mapped_reg);
- else
- iowrite32(value, clk->mapped_reg);
-}
-
-static int sh_clk_mstp_enable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
- if (clk->status_reg) {
- unsigned int (*read)(const void __iomem *addr);
- int i;
- void __iomem *mapped_status = (phys_addr_t)clk->status_reg -
- (phys_addr_t)clk->enable_reg + clk->mapped_reg;
-
- if (clk->flags & CLK_ENABLE_REG_8BIT)
- read = ioread8;
- else if (clk->flags & CLK_ENABLE_REG_16BIT)
- read = ioread16;
- else
- read = ioread32;
-
- for (i = 1000;
- (read(mapped_status) & (1 << clk->enable_bit)) && i;
- i--)
- cpu_relax();
- if (!i) {
- pr_err("cpg: failed to enable %p[%d]\n",
- clk->enable_reg, clk->enable_bit);
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
-static void sh_clk_mstp_disable(struct clk *clk)
-{
- sh_clk_write(sh_clk_read(clk) | (1 << clk->enable_bit), clk);
-}
-
-static struct sh_clk_ops sh_clk_mstp_clk_ops = {
- .enable = sh_clk_mstp_enable,
- .disable = sh_clk_mstp_disable,
- .recalc = followparent_recalc,
-};
-
-int __init sh_clk_mstp_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &sh_clk_mstp_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-/*
- * Div/mult table lookup helpers
- */
-static inline struct clk_div_table *clk_to_div_table(struct clk *clk)
-{
- return clk->priv;
-}
-
-static inline struct clk_div_mult_table *clk_to_div_mult_table(struct clk *clk)
-{
- return clk_to_div_table(clk)->div_mult_table;
-}
-
-/*
- * Common div ops
- */
-static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static unsigned long sh_clk_div_recalc(struct clk *clk)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- unsigned int idx;
-
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, clk->arch_flags ? &clk->arch_flags : NULL);
-
- idx = (sh_clk_read(clk) >> clk->enable_bit) & clk->div_mask;
-
- return clk->freq_table[idx].frequency;
-}
-
-static int sh_clk_div_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk_div_table *dt = clk_to_div_table(clk);
- unsigned long value;
- int idx;
-
- idx = clk_rate_table_find(clk, clk->freq_table, rate);
- if (idx < 0)
- return idx;
-
- value = sh_clk_read(clk);
- value &= ~(clk->div_mask << clk->enable_bit);
- value |= (idx << clk->enable_bit);
- sh_clk_write(value, clk);
-
- /* XXX: Should use a post-change notifier */
- if (dt->kick)
- dt->kick(clk);
-
- return 0;
-}
-
-static int sh_clk_div_enable(struct clk *clk)
-{
- if (clk->div_mask == SH_CLK_DIV6_MSK) {
- int ret = sh_clk_div_set_rate(clk, clk->rate);
- if (ret < 0)
- return ret;
- }
-
- sh_clk_write(sh_clk_read(clk) & ~CPG_CKSTP_BIT, clk);
- return 0;
-}
-
-static void sh_clk_div_disable(struct clk *clk)
-{
- unsigned int val;
-
- val = sh_clk_read(clk);
- val |= CPG_CKSTP_BIT;
-
- /*
- * div6 clocks require the divisor field to be non-zero or the
- * above CKSTP toggle silently fails. Ensure that the divisor
- * array is reset to its initial state on disable.
- */
- if (clk->flags & CLK_MASK_DIV_ON_DISABLE)
- val |= clk->div_mask;
-
- sh_clk_write(val, clk);
-}
-
-static struct sh_clk_ops sh_clk_div_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
-};
-
-static struct sh_clk_ops sh_clk_div_enable_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
-};
-
-static int __init sh_clk_init_parent(struct clk *clk)
-{
- u32 val;
-
- if (clk->parent)
- return 0;
-
- if (!clk->parent_table || !clk->parent_num)
- return 0;
-
- if (!clk->src_width) {
- pr_err("sh_clk_init_parent: cannot select parent clock\n");
- return -EINVAL;
- }
-
- val = (sh_clk_read(clk) >> clk->src_shift);
- val &= (1 << clk->src_width) - 1;
-
- if (val >= clk->parent_num) {
- pr_err("sh_clk_init_parent: parent table size failed\n");
- return -EINVAL;
- }
-
- clk_reparent(clk, clk->parent_table[val]);
- if (!clk->parent) {
- pr_err("sh_clk_init_parent: unable to set parent");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int __init sh_clk_div_register_ops(struct clk *clks, int nr,
- struct clk_div_table *table, struct sh_clk_ops *ops)
-{
- struct clk *clkp;
- void *freq_table;
- int nr_divs = table->div_mult_table->nr_divisors;
- int freq_table_size = sizeof(struct cpufreq_frequency_table);
- int ret = 0;
- int k;
-
- freq_table_size *= (nr_divs + 1);
- freq_table = kcalloc(nr, freq_table_size, GFP_KERNEL);
- if (!freq_table) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
-
- clkp->ops = ops;
- clkp->priv = table;
-
- clkp->freq_table = freq_table + (k * freq_table_size);
- clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
- ret = clk_register(clkp);
- if (ret == 0)
- ret = sh_clk_init_parent(clkp);
- }
-
- return ret;
-}
-
-/*
- * div6 support
- */
-static int sh_clk_div6_divisors[64] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
- 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
- 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
-};
-
-static struct clk_div_mult_table div6_div_mult_table = {
- .divisors = sh_clk_div6_divisors,
- .nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
-};
-
-static struct clk_div_table sh_clk_div6_table = {
- .div_mult_table = &div6_div_mult_table,
-};
-
-static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret, i;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] == parent)
- break;
-
- if (i == clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- value = sh_clk_read(clk) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- sh_clk_write(value | (i << clk->src_shift), clk);
-
- /* Rebuild the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, NULL);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .round_rate = sh_clk_div_round_rate,
- .set_rate = sh_clk_div_set_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div6_set_parent,
-};
-
-int __init sh_clk_div6_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
-{
- return sh_clk_div_register_ops(clks, nr, &sh_clk_div6_table,
- &sh_clk_div6_reparent_clk_ops);
-}
-
-/*
- * div4 support
- */
-static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk_div_mult_table *table = clk_to_div_mult_table(clk);
- u32 value;
- int ret;
-
- /* we really need a better way to determine parent index, but for
- * now assume internal parent comes with CLK_ENABLE_ON_INIT set,
- * no CLK_ENABLE_ON_INIT means external clock...
- */
-
- if (parent->flags & CLK_ENABLE_ON_INIT)
- value = sh_clk_read(clk) & ~(1 << 7);
- else
- value = sh_clk_read(clk) | (1 << 7);
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- sh_clk_write(value, clk);
-
- /* Rebiuld the frequency table */
- clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
- table, &clk->arch_flags);
-
- return 0;
-}
-
-static struct sh_clk_ops sh_clk_div4_reparent_clk_ops = {
- .recalc = sh_clk_div_recalc,
- .set_rate = sh_clk_div_set_rate,
- .round_rate = sh_clk_div_round_rate,
- .enable = sh_clk_div_enable,
- .disable = sh_clk_div_disable,
- .set_parent = sh_clk_div4_set_parent,
-};
-
-int __init sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div_clk_ops);
-}
-
-int __init sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div_enable_clk_ops);
-}
-
-int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table)
-{
- return sh_clk_div_register_ops(clks, nr, table,
- &sh_clk_div4_reparent_clk_ops);
-}
-
-/* FSI-DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base);
-
- value >>= 16;
- if (value < 2)
- return clk->parent->rate;
-
- return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_rate_div_range_round(clk, 1, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
- __raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
- u32 value;
-
- value = __raw_readl(clk->mapping->base) >> 16;
- if (value < 2)
- return 0;
-
- __raw_writel((value << 16) | 0x3, clk->mapping->base);
-
- return 0;
-}
-
-static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-{
- int idx;
-
- idx = (clk->parent->rate / rate) & 0xffff;
- if (idx < 2)
- __raw_writel(0, clk->mapping->base);
- else
- __raw_writel(idx << 16, clk->mapping->base);
-
- return 0;
-}
-
-static struct sh_clk_ops fsidiv_clk_ops = {
- .recalc = fsidiv_recalc,
- .round_rate = fsidiv_round_rate,
- .set_rate = fsidiv_set_rate,
- .enable = fsidiv_enable,
- .disable = fsidiv_disable,
-};
-
-int __init sh_clk_fsidiv_register(struct clk *clks, int nr)
-{
- struct clk_mapping *map;
- int i;
-
- for (i = 0; i < nr; i++) {
-
- map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL);
- if (!map) {
- pr_err("%s: unable to alloc memory\n", __func__);
- return -ENOMEM;
- }
-
- /* clks[i].enable_reg came from SH_CLK_FSIDIV() */
- map->phys = (phys_addr_t)clks[i].enable_reg;
- map->len = 8;
-
- clks[i].enable_reg = 0; /* remove .enable_reg */
- clks[i].ops = &fsidiv_clk_ops;
- clks[i].mapping = map;
-
- clk_register(&clks[i]);
- }
-
- return 0;
-}
diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
deleted file mode 100644
index 5c701709fef528..00000000000000
--- a/drivers/sh/intc/Kconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config SH_INTC
- bool
- select IRQ_DOMAIN
-
-if SH_INTC
-
-comment "Interrupt controller options"
-
-config INTC_USERIMASK
- bool "Userspace interrupt masking support"
- depends on (SUPERH && CPU_SH4A) || COMPILE_TEST
- help
- This enables support for hardware-assisted userspace hardirq
- masking.
-
- SH-4A and newer interrupt blocks all support a special shadowed
- page with all non-masking registers obscured when mapped in to
- userspace. This is primarily for use by userspace device
- drivers that are using special priority levels.
-
- If in doubt, say N.
-
-config INTC_BALANCING
- bool "Hardware IRQ balancing support"
- depends on SMP && SUPERH && CPU_SHX3
- help
- This enables support for IRQ auto-distribution mode on SH-X3
- SMP parts. All of the balancing and CPU wakeup decisions are
- taken care of automatically by hardware for distributed
- vectors.
-
- If in doubt, say N.
-
-config INTC_MAPPING_DEBUG
- bool "Expose IRQ to per-controller id mapping via debugfs"
- depends on DEBUG_FS
- help
- This will create a debugfs entry for showing the relationship
- between system IRQs and the per-controller id tables.
-
- If in doubt, say N.
-
-endif
diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile
deleted file mode 100644
index bdd855327e41d5..00000000000000
--- a/drivers/sh/intc/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o
-
-obj-$(CONFIG_INTC_BALANCING) += balancing.o
-obj-$(CONFIG_INTC_USERIMASK) += userimask.o
-obj-$(CONFIG_INTC_MAPPING_DEBUG) += virq-debugfs.o
diff --git a/drivers/sh/intc/access.c b/drivers/sh/intc/access.c
deleted file mode 100644
index 114390f967d26e..00000000000000
--- a/drivers/sh/intc/access.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Common INTC2 register accessors
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include "internals.h"
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address)
-{
- struct intc_window *window;
- int k;
-
- /* scan through physical windows and convert address */
- for (k = 0; k < d->nr_windows; k++) {
- window = d->window + k;
-
- if (address < window->phys)
- continue;
-
- if (address >= (window->phys + window->size))
- continue;
-
- address -= window->phys;
- address += (unsigned long)window->virt;
-
- return address;
- }
-
- /* no windows defined, register must be 1:1 mapped virt:phys */
- return address;
-}
-
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address)
-{
- unsigned int k;
-
- address = intc_phys_to_virt(d, address);
-
- for (k = 0; k < d->nr_reg; k++) {
- if (d->reg[k] == address)
- return k;
- }
-
- BUG();
- return 0;
-}
-
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
-
- value &= ~(((1 << width) - 1) << shift);
- value |= field_value << shift;
- return value;
-}
-
-unsigned long intc_get_field_from_handle(unsigned int value, unsigned int handle)
-{
- unsigned int width = _INTC_WIDTH(handle);
- unsigned int shift = _INTC_SHIFT(handle);
- unsigned int mask = ((1 << width) - 1) << shift;
-
- return (value & mask) >> shift;
-}
-
-static unsigned long test_8(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readb(ptr), h);
-}
-
-static unsigned long test_16(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readw(ptr), h);
-}
-
-static unsigned long test_32(unsigned long addr, unsigned long h,
- unsigned long ignore)
-{
- void __iomem *ptr = (void __iomem *)addr;
- return intc_get_field_from_handle(__raw_readl(ptr), h);
-}
-
-static unsigned long write_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writeb(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writew(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long write_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- __raw_writel(intc_set_field_from_handle(0, data, h), ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- return 0;
-}
-
-static unsigned long modify_8(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readb(ptr), data, h);
- __raw_writeb(value, ptr);
- (void)__raw_readb(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_16(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readw(ptr), data, h);
- __raw_writew(value, ptr);
- (void)__raw_readw(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long modify_32(unsigned long addr, unsigned long h,
- unsigned long data)
-{
- void __iomem *ptr = (void __iomem *)addr;
- unsigned long flags;
- unsigned int value;
- local_irq_save(flags);
- value = intc_set_field_from_handle(__raw_readl(ptr), data, h);
- __raw_writel(value, ptr);
- (void)__raw_readl(ptr); /* Defeat write posting */
- local_irq_restore(flags);
- return 0;
-}
-
-static unsigned long intc_mode_field(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1));
-}
-
-static unsigned long intc_mode_zero(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, 0);
-}
-
-static unsigned long intc_mode_prio(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq)
-{
- return fn(addr, handle, intc_get_prio_level(irq));
-}
-
-unsigned long (*intc_reg_fns[])(unsigned long addr,
- unsigned long h,
- unsigned long data) = {
- [REG_FN_TEST_BASE + 0] = test_8,
- [REG_FN_TEST_BASE + 1] = test_16,
- [REG_FN_TEST_BASE + 3] = test_32,
- [REG_FN_WRITE_BASE + 0] = write_8,
- [REG_FN_WRITE_BASE + 1] = write_16,
- [REG_FN_WRITE_BASE + 3] = write_32,
- [REG_FN_MODIFY_BASE + 0] = modify_8,
- [REG_FN_MODIFY_BASE + 1] = modify_16,
- [REG_FN_MODIFY_BASE + 3] = modify_32,
-};
-
-unsigned long (*intc_enable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_prio,
- [MODE_PCLR_REG] = intc_mode_prio,
-};
-
-unsigned long (*intc_disable_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_zero,
- [MODE_MASK_REG] = intc_mode_field,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_zero,
- [MODE_PCLR_REG] = intc_mode_field,
-};
-
-unsigned long (*intc_enable_noprio_fns[])(unsigned long addr,
- unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long,
- unsigned long),
- unsigned int irq) = {
- [MODE_ENABLE_REG] = intc_mode_field,
- [MODE_MASK_REG] = intc_mode_zero,
- [MODE_DUAL_REG] = intc_mode_field,
- [MODE_PRIO_REG] = intc_mode_field,
- [MODE_PCLR_REG] = intc_mode_field,
-};
diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c
deleted file mode 100644
index bc780807ccb0fe..00000000000000
--- a/drivers/sh/intc/balancing.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Support for hardware-managed IRQ auto-distribution.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "internals.h"
-
-static unsigned long dist_handle[INTC_NR_IRQS];
-
-void intc_balancing_enable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 1);
-}
-
-void intc_balancing_disable(unsigned int irq)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = dist_handle[irq];
- unsigned long addr;
-
- if (irq_balancing_disabled(irq) || !handle)
- return;
-
- addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
- intc_reg_fns[_INTC_FN(handle)](addr, handle, 0);
-}
-
-static unsigned int intc_dist_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_mask_regs; i++) {
- mr = desc->hw.mask_regs + i;
-
- /*
- * Skip this entry if there's no auto-distribution
- * register associated with it.
- */
- if (!mr->dist_reg)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->dist_reg;
- reg_d = mr->dist_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- /*
- * It's possible we've gotten here with no distribution options
- * available for the IRQ in question, so we just skip over those.
- */
- return 0;
-}
-
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.mask_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- dist_handle[irq] = intc_dist_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
deleted file mode 100644
index 828d81e02b37ab..00000000000000
--- a/drivers/sh/intc/chip.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * IRQ chip definitions for INTC IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/cpumask.h>
-#include <linux/bsearch.h>
-#include <linux/io.h>
-#include "internals.h"
-
-void _intc_enable(struct irq_data *data, unsigned long handle)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long addr;
- unsigned int cpu;
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-
- intc_balancing_enable(irq);
-}
-
-static void intc_enable(struct irq_data *data)
-{
- _intc_enable(data, (unsigned long)irq_data_get_irq_chip_data(data));
-}
-
-static void intc_disable(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = (unsigned long)irq_data_get_irq_chip_data(data);
- unsigned long addr;
- unsigned int cpu;
-
- intc_balancing_disable(irq);
-
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
-#ifdef CONFIG_SMP
- if (!cpumask_test_cpu(cpu, irq_data_get_affinity_mask(data)))
- continue;
-#endif
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\
- [_INTC_FN(handle)], irq);
- }
-}
-
-#ifdef CONFIG_SMP
-/*
- * This is held with the irq desc lock held, so we don't require any
- * additional locking here at the intc desc level. The affinity mask is
- * later tested in the enable/disable paths.
- */
-static int intc_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask,
- bool force)
-{
- if (!cpumask_intersects(cpumask, cpu_online_mask))
- return -1;
-
- irq_data_update_affinity(data, cpumask);
-
- return IRQ_SET_MASK_OK_NOCOPY;
-}
-#endif
-
-static void intc_mask_ack(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned long handle = intc_get_ack_handle(irq);
- void __iomem *addr;
-
- intc_disable(data);
-
- /* read register and write zero only to the associated bit */
- if (handle) {
- unsigned int value;
-
- addr = (void __iomem *)INTC_REG(d, _INTC_ADDR_D(handle), 0);
- value = intc_set_field_from_handle(0, 1, handle);
-
- switch (_INTC_FN(handle)) {
- case REG_FN_MODIFY_BASE + 0: /* 8bit */
- __raw_readb(addr);
- __raw_writeb(0xff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 1: /* 16bit */
- __raw_readw(addr);
- __raw_writew(0xffff ^ value, addr);
- break;
- case REG_FN_MODIFY_BASE + 3: /* 32bit */
- __raw_readl(addr);
- __raw_writel(0xffffffff ^ value, addr);
- break;
- default:
- BUG();
- break;
- }
- }
-}
-
-static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
- unsigned int nr_hp,
- unsigned int irq)
-{
- struct intc_handle_int key;
-
- key.irq = irq;
- key.handle = 0;
-
- return bsearch(&key, hp, nr_hp, sizeof(*hp), intc_handle_int_cmp);
-}
-
-int intc_set_priority(unsigned int irq, unsigned int prio)
-{
- struct intc_desc_int *d = get_intc_desc(irq);
- struct irq_data *data = irq_get_irq_data(irq);
- struct intc_handle_int *ihp;
-
- if (!intc_get_prio_level(irq) || prio <= 1)
- return -EINVAL;
-
- ihp = intc_find_irq(d->prio, d->nr_prio, irq);
- if (ihp) {
- if (prio >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- intc_set_prio_level(irq, prio);
-
- /*
- * only set secondary masking method directly
- * primary masking method is using intc_prio_level[irq]
- * priority level will be set during next enable()
- */
- if (_INTC_FN(ihp->handle) != REG_FN_ERR)
- _intc_enable(data, ihp->handle);
- }
- return 0;
-}
-
-#define SENSE_VALID_FLAG 0x80
-#define VALID(x) (x | SENSE_VALID_FLAG)
-
-static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
- [IRQ_TYPE_EDGE_FALLING] = VALID(0),
- [IRQ_TYPE_EDGE_RISING] = VALID(1),
- [IRQ_TYPE_LEVEL_LOW] = VALID(2),
- /* SH7706, SH7707 and SH7709 do not support high level triggered */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7709)
- [IRQ_TYPE_LEVEL_HIGH] = VALID(3),
-#endif
-#if defined(CONFIG_ARM) /* all recent SH-Mobile / R-Mobile ARM support this */
- [IRQ_TYPE_EDGE_BOTH] = VALID(4),
-#endif
-};
-
-static int intc_set_type(struct irq_data *data, unsigned int type)
-{
- unsigned int irq = data->irq;
- struct intc_desc_int *d = get_intc_desc(irq);
- unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK];
- struct intc_handle_int *ihp;
- unsigned long addr;
-
- if (!value)
- return -EINVAL;
-
- value &= ~SENSE_VALID_FLAG;
-
- ihp = intc_find_irq(d->sense, d->nr_sense, irq);
- if (ihp) {
- /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
- if (value >= (1 << _INTC_WIDTH(ihp->handle)))
- return -EINVAL;
-
- addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
- }
-
- return 0;
-}
-
-struct irq_chip intc_irq_chip = {
- .irq_mask = intc_disable,
- .irq_unmask = intc_enable,
- .irq_mask_ack = intc_mask_ack,
- .irq_enable = intc_enable,
- .irq_disable = intc_disable,
- .irq_set_type = intc_set_type,
-#ifdef CONFIG_SMP
- .irq_set_affinity = intc_set_affinity,
-#endif
- .flags = IRQCHIP_SKIP_SET_WAKE,
-};
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
deleted file mode 100644
index ca4f4ca413f11d..00000000000000
--- a/drivers/sh/intc/core.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009 - 2012 Paul Mundt
- *
- * Based on intc2.c and ipr.c
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Copyright (C) 2005, 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-#include <linux/sh_intc.h>
-#include <linux/irqdomain.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/radix-tree.h>
-#include <linux/export.h>
-#include <linux/sort.h>
-#include "internals.h"
-
-LIST_HEAD(intc_list);
-DEFINE_RAW_SPINLOCK(intc_big_lock);
-static unsigned int nr_intc_controllers;
-
-/*
- * Default priority level
- * - this needs to be at least 2 for 5-bit priorities on 7780
- */
-static unsigned int default_prio_level = 2; /* 2 - 16 */
-static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */
-
-unsigned int intc_get_dfl_prio_level(void)
-{
- return default_prio_level;
-}
-
-unsigned int intc_get_prio_level(unsigned int irq)
-{
- return intc_prio_level[irq];
-}
-
-void intc_set_prio_level(unsigned int irq, unsigned int level)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_prio_level[irq] = level;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-static void intc_redirect_irq(struct irq_desc *desc)
-{
- generic_handle_irq((unsigned int)irq_desc_get_handler_data(desc));
-}
-
-static void __init intc_register_irq(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int irq)
-{
- struct intc_handle_int *hp;
- struct irq_data *irq_data;
- unsigned int data[2], primary;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- radix_tree_insert(&d->tree, enum_id, intc_irq_xlate_get(irq));
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-
- /*
- * Prefer single interrupt source bitmap over other combinations:
- *
- * 1. bitmap, single interrupt source
- * 2. priority, single interrupt source
- * 3. bitmap, multiple interrupt sources (groups)
- * 4. priority, multiple interrupt sources (groups)
- */
- data[0] = intc_get_mask_handle(desc, d, enum_id, 0);
- data[1] = intc_get_prio_handle(desc, d, enum_id, 0);
-
- primary = 0;
- if (!data[0] && data[1])
- primary = 1;
-
- if (!data[0] && !data[1])
- pr_warn("missing unique irq mask for irq %d (vect 0x%04x)\n",
- irq, irq2evt(irq));
-
- data[0] = data[0] ? data[0] : intc_get_mask_handle(desc, d, enum_id, 1);
- data[1] = data[1] ? data[1] : intc_get_prio_handle(desc, d, enum_id, 1);
-
- if (!data[primary])
- primary ^= 1;
-
- BUG_ON(!data[primary]); /* must have primary masking method */
-
- irq_data = irq_get_irq_data(irq);
-
- disable_irq_nosync(irq);
- irq_set_chip_and_handler_name(irq, &d->chip, handle_level_irq,
- "level");
- irq_set_chip_data(irq, (void *)data[primary]);
-
- /*
- * set priority level
- */
- intc_set_prio_level(irq, intc_get_dfl_prio_level());
-
- /* enable secondary masking method if present */
- if (data[!primary])
- _intc_enable(irq_data, data[!primary]);
-
- /* add irq to d->prio list if priority is available */
- if (data[1]) {
- hp = d->prio + d->nr_prio;
- hp->irq = irq;
- hp->handle = data[1];
-
- if (primary) {
- /*
- * only secondary priority should access registers, so
- * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority()
- */
- hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0);
- hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0);
- }
- d->nr_prio++;
- }
-
- /* add irq to d->sense list if sense is available */
- data[0] = intc_get_sense_handle(desc, d, enum_id);
- if (data[0]) {
- (d->sense + d->nr_sense)->irq = irq;
- (d->sense + d->nr_sense)->handle = data[0];
- d->nr_sense++;
- }
-
- /* irq should be disabled by default */
- d->chip.irq_mask(irq_data);
-
- intc_set_ack_handle(irq, desc, d, enum_id);
- intc_set_dist_handle(irq, desc, d, enum_id);
-
- activate_irq(irq);
-}
-
-static unsigned int __init save_reg(struct intc_desc_int *d,
- unsigned int cnt,
- unsigned long value,
- unsigned int smp)
-{
- if (value) {
- value = intc_phys_to_virt(d, value);
-
- d->reg[cnt] = value;
-#ifdef CONFIG_SMP
- d->smp[cnt] = smp;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-static bool __init intc_map(struct irq_domain *domain, int irq)
-{
- if (!irq_to_desc(irq) && irq_alloc_desc_at(irq, NUMA_NO_NODE) != irq) {
- pr_err("uname to allocate IRQ %d\n", irq);
- return false;
- }
-
- if (irq_domain_associate(domain, irq, irq)) {
- pr_err("domain association failure\n");
- return false;
- }
-
- return true;
-}
-
-int __init register_intc_controller(struct intc_desc *desc)
-{
- unsigned int i, k, smp;
- struct intc_hw_desc *hw = &desc->hw;
- struct intc_desc_int *d;
- struct resource *res;
-
- pr_info("Registered controller '%s' with %u IRQs\n",
- desc->name, hw->nr_vectors);
-
- d = kzalloc(sizeof(*d), GFP_NOWAIT);
- if (!d)
- goto err0;
-
- INIT_LIST_HEAD(&d->list);
- list_add_tail(&d->list, &intc_list);
-
- raw_spin_lock_init(&d->lock);
- INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
-
- d->index = nr_intc_controllers;
-
- if (desc->num_resources) {
- d->nr_windows = desc->num_resources;
- d->window = kcalloc(d->nr_windows, sizeof(*d->window),
- GFP_NOWAIT);
- if (!d->window)
- goto err1;
-
- for (k = 0; k < d->nr_windows; k++) {
- res = desc->resource + k;
- WARN_ON(resource_type(res) != IORESOURCE_MEM);
- d->window[k].phys = res->start;
- d->window[k].size = resource_size(res);
- d->window[k].virt = ioremap(res->start,
- resource_size(res));
- if (!d->window[k].virt)
- goto err2;
- }
- }
-
- d->nr_reg = hw->mask_regs ? hw->nr_mask_regs * 2 : 0;
-#ifdef CONFIG_INTC_BALANCING
- if (d->nr_reg)
- d->nr_reg += hw->nr_mask_regs;
-#endif
- d->nr_reg += hw->prio_regs ? hw->nr_prio_regs * 2 : 0;
- d->nr_reg += hw->sense_regs ? hw->nr_sense_regs : 0;
- d->nr_reg += hw->ack_regs ? hw->nr_ack_regs : 0;
- d->nr_reg += hw->subgroups ? hw->nr_subgroups : 0;
-
- d->reg = kcalloc(d->nr_reg, sizeof(*d->reg), GFP_NOWAIT);
- if (!d->reg)
- goto err2;
-
-#ifdef CONFIG_SMP
- d->smp = kcalloc(d->nr_reg, sizeof(*d->smp), GFP_NOWAIT);
- if (!d->smp)
- goto err3;
-#endif
- k = 0;
-
- if (hw->mask_regs) {
- for (i = 0; i < hw->nr_mask_regs; i++) {
- smp = IS_SMP(hw->mask_regs[i]);
- k += save_reg(d, k, hw->mask_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->mask_regs[i].clr_reg, smp);
-#ifdef CONFIG_INTC_BALANCING
- k += save_reg(d, k, hw->mask_regs[i].dist_reg, 0);
-#endif
- }
- }
-
- if (hw->prio_regs) {
- d->prio = kcalloc(hw->nr_vectors, sizeof(*d->prio),
- GFP_NOWAIT);
- if (!d->prio)
- goto err4;
-
- for (i = 0; i < hw->nr_prio_regs; i++) {
- smp = IS_SMP(hw->prio_regs[i]);
- k += save_reg(d, k, hw->prio_regs[i].set_reg, smp);
- k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp);
- }
-
- sort(d->prio, hw->nr_prio_regs, sizeof(*d->prio),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->sense_regs) {
- d->sense = kcalloc(hw->nr_vectors, sizeof(*d->sense),
- GFP_NOWAIT);
- if (!d->sense)
- goto err5;
-
- for (i = 0; i < hw->nr_sense_regs; i++)
- k += save_reg(d, k, hw->sense_regs[i].reg, 0);
-
- sort(d->sense, hw->nr_sense_regs, sizeof(*d->sense),
- intc_handle_int_cmp, NULL);
- }
-
- if (hw->subgroups)
- for (i = 0; i < hw->nr_subgroups; i++)
- if (hw->subgroups[i].reg)
- k+= save_reg(d, k, hw->subgroups[i].reg, 0);
-
- memcpy(&d->chip, &intc_irq_chip, sizeof(struct irq_chip));
- d->chip.name = desc->name;
-
- if (hw->ack_regs)
- for (i = 0; i < hw->nr_ack_regs; i++)
- k += save_reg(d, k, hw->ack_regs[i].set_reg, 0);
- else
- d->chip.irq_mask_ack = d->chip.irq_disable;
-
- /* disable bits matching force_disable before registering irqs */
- if (desc->force_disable)
- intc_enable_disable_enum(desc, d, desc->force_disable, 0);
-
- /* disable bits matching force_enable before registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 0);
-
- BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
- intc_irq_domain_init(d, hw);
-
- /* register the vectors one by one */
- for (i = 0; i < hw->nr_vectors; i++) {
- struct intc_vect *vect = hw->vectors + i;
- unsigned int irq = evt2irq(vect->vect);
-
- if (!vect->enum_id)
- continue;
-
- if (!intc_map(d->domain, irq))
- continue;
-
- intc_irq_xlate_set(irq, vect->enum_id, d);
- intc_register_irq(desc, d, vect->enum_id, irq);
-
- for (k = i + 1; k < hw->nr_vectors; k++) {
- struct intc_vect *vect2 = hw->vectors + k;
- unsigned int irq2 = evt2irq(vect2->vect);
-
- if (vect->enum_id != vect2->enum_id)
- continue;
-
- /*
- * In the case of multi-evt handling and sparse
- * IRQ support, each vector still needs to have
- * its own backing irq_desc.
- */
- if (!intc_map(d->domain, irq2))
- continue;
-
- vect2->enum_id = 0;
-
- /* redirect this interrupts to the first one */
- irq_set_chip(irq2, &dummy_irq_chip);
- irq_set_chained_handler_and_data(irq2,
- intc_redirect_irq,
- (void *)irq);
- }
- }
-
- intc_subgroup_init(desc, d);
-
- /* enable bits matching force_enable after registering irqs */
- if (desc->force_enable)
- intc_enable_disable_enum(desc, d, desc->force_enable, 1);
-
- d->skip_suspend = desc->skip_syscore_suspend;
-
- nr_intc_controllers++;
-
- return 0;
-err5:
- kfree(d->prio);
-err4:
-#ifdef CONFIG_SMP
- kfree(d->smp);
-err3:
-#endif
- kfree(d->reg);
-err2:
- for (k = 0; k < d->nr_windows; k++)
- if (d->window[k].virt)
- iounmap(d->window[k].virt);
-
- kfree(d->window);
-err1:
- kfree(d);
-err0:
- pr_err("unable to allocate INTC memory\n");
-
- return -ENOMEM;
-}
-
-static int intc_suspend(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- /* enable wakeup irqs belonging to this intc controller */
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- if (chip != &d->chip)
- continue;
- if (irqd_is_wakeup_set(data))
- chip->irq_enable(data);
- }
- }
- return 0;
-}
-
-static void intc_resume(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list) {
- int irq;
-
- if (d->skip_suspend)
- continue;
-
- for_each_active_irq(irq) {
- struct irq_data *data;
- struct irq_chip *chip;
-
- data = irq_get_irq_data(irq);
- chip = irq_data_get_irq_chip(data);
- /*
- * This will catch the redirect and VIRQ cases
- * due to the dummy_irq_chip being inserted.
- */
- if (chip != &d->chip)
- continue;
- if (irqd_irq_disabled(data))
- chip->irq_disable(data);
- else
- chip->irq_enable(data);
- }
- }
-}
-
-struct syscore_ops intc_syscore_ops = {
- .suspend = intc_suspend,
- .resume = intc_resume,
-};
-
-struct bus_type intc_subsys = {
- .name = "intc",
- .dev_name = "intc",
-};
-
-static ssize_t
-show_intc_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct intc_desc_int *d;
-
- d = container_of(dev, struct intc_desc_int, dev);
-
- return sprintf(buf, "%s\n", d->chip.name);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, show_intc_name, NULL);
-
-static int __init register_intc_devs(void)
-{
- struct intc_desc_int *d;
- int error;
-
- register_syscore_ops(&intc_syscore_ops);
-
- error = subsys_system_register(&intc_subsys, NULL);
- if (!error) {
- list_for_each_entry(d, &intc_list, list) {
- d->dev.id = d->index;
- d->dev.bus = &intc_subsys;
- error = device_register(&d->dev);
- if (error == 0)
- error = device_create_file(&d->dev,
- &dev_attr_name);
- if (error)
- break;
- }
- }
-
- if (error)
- pr_err("device registration error\n");
-
- return error;
-}
-device_initcall(register_intc_devs);
diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c
deleted file mode 100644
index 7863a44918a293..00000000000000
--- a/drivers/sh/intc/handle.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Shared interrupt handling code for IPR and INTC2 types of IRQs.
- *
- * Copyright (C) 2007, 2008 Magnus Damm
- * Copyright (C) 2009, 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include "internals.h"
-
-static unsigned long ack_handle[INTC_NR_IRQS];
-
-static intc_enum __init intc_grp_id(struct intc_desc *desc,
- intc_enum enum_id)
-{
- struct intc_group *g = desc->hw.groups;
- unsigned int i, j;
-
- for (i = 0; g && enum_id && i < desc->hw.nr_groups; i++) {
- g = desc->hw.groups + i;
-
- for (j = 0; g->enum_ids[j]; j++) {
- if (g->enum_ids[j] != enum_id)
- continue;
-
- return g->enum_id;
- }
- }
-
- return 0;
-}
-
-static unsigned int __init _intc_mask_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_mask_reg *mr = desc->hw.mask_regs;
- unsigned int fn, mode;
- unsigned long reg_e, reg_d;
-
- while (mr && enum_id && *reg_idx < desc->hw.nr_mask_regs) {
- mr = desc->hw.mask_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(mr->enum_ids); (*fld_idx)++) {
- if (mr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (mr->set_reg && mr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_DUAL_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->set_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- if (mr->set_reg) {
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
- } else {
- mode = MODE_MASK_REG;
- reg_e = mr->clr_reg;
- reg_d = mr->clr_reg;
- }
- }
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - *fld_idx);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_mask_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_mask_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int __init _intc_prio_data(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id,
- unsigned int *reg_idx,
- unsigned int *fld_idx)
-{
- struct intc_prio_reg *pr = desc->hw.prio_regs;
- unsigned int fn, n, mode, bit;
- unsigned long reg_e, reg_d;
-
- while (pr && enum_id && *reg_idx < desc->hw.nr_prio_regs) {
- pr = desc->hw.prio_regs + *reg_idx;
-
- for (; *fld_idx < ARRAY_SIZE(pr->enum_ids); (*fld_idx)++) {
- if (pr->enum_ids[*fld_idx] != enum_id)
- continue;
-
- if (pr->set_reg && pr->clr_reg) {
- fn = REG_FN_WRITE_BASE;
- mode = MODE_PCLR_REG;
- reg_e = pr->set_reg;
- reg_d = pr->clr_reg;
- } else {
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_PRIO_REG;
- if (!pr->set_reg)
- BUG();
- reg_e = pr->set_reg;
- reg_d = pr->set_reg;
- }
-
- fn += (pr->reg_width >> 3) - 1;
- n = *fld_idx + 1;
-
- BUG_ON(n * pr->field_width > pr->reg_width);
-
- bit = pr->reg_width - (n * pr->field_width);
-
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- pr->field_width, bit);
- }
-
- *fld_idx = 0;
- (*reg_idx)++;
- }
-
- return 0;
-}
-
-unsigned int __init
-intc_get_prio_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int do_grps)
-{
- unsigned int i = 0;
- unsigned int j = 0;
- unsigned int ret;
-
- ret = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (ret)
- return ret;
-
- if (do_grps)
- return intc_get_prio_handle(desc, d, intc_grp_id(desc, enum_id), 0);
-
- return 0;
-}
-
-static unsigned int intc_ack_data(struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum enum_id)
-{
- struct intc_mask_reg *mr = desc->hw.ack_regs;
- unsigned int i, j, fn, mode;
- unsigned long reg_e, reg_d;
-
- for (i = 0; mr && enum_id && i < desc->hw.nr_ack_regs; i++) {
- mr = desc->hw.ack_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
- if (mr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- mode = MODE_ENABLE_REG;
- reg_e = mr->set_reg;
- reg_d = mr->set_reg;
-
- fn += (mr->reg_width >> 3) - 1;
- return _INTC_MK(fn, mode,
- intc_get_reg(d, reg_e),
- intc_get_reg(d, reg_d),
- 1,
- (mr->reg_width - 1) - j);
- }
- }
-
- return 0;
-}
-
-static void intc_enable_disable(struct intc_desc_int *d,
- unsigned long handle, int do_enable)
-{
- unsigned long addr;
- unsigned int cpu;
- unsigned long (*fn)(unsigned long, unsigned long,
- unsigned long (*)(unsigned long, unsigned long,
- unsigned long),
- unsigned int);
-
- if (do_enable) {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
- fn = intc_enable_noprio_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- } else {
- for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
- addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
- fn = intc_disable_fns[_INTC_MODE(handle)];
- fn(addr, handle, intc_reg_fns[_INTC_FN(handle)], 0);
- }
- }
-}
-
-void __init intc_enable_disable_enum(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int enable)
-{
- unsigned int i, j, data;
-
- /* go through and enable/disable all mask bits */
- i = j = 0;
- do {
- data = _intc_mask_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
- j++;
- } while (data);
-
- /* go through and enable/disable all priority fields */
- i = j = 0;
- do {
- data = _intc_prio_data(desc, d, enum_id, &i, &j);
- if (data)
- intc_enable_disable(d, data, enable);
-
- j++;
- } while (data);
-}
-
-unsigned int __init
-intc_get_sense_handle(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id)
-{
- struct intc_sense_reg *sr = desc->hw.sense_regs;
- unsigned int i, j, fn, bit;
-
- for (i = 0; sr && enum_id && i < desc->hw.nr_sense_regs; i++) {
- sr = desc->hw.sense_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
- if (sr->enum_ids[j] != enum_id)
- continue;
-
- fn = REG_FN_MODIFY_BASE;
- fn += (sr->reg_width >> 3) - 1;
-
- BUG_ON((j + 1) * sr->field_width > sr->reg_width);
-
- bit = sr->reg_width - ((j + 1) * sr->field_width);
-
- return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg),
- 0, sr->field_width, bit);
- }
- }
-
- return 0;
-}
-
-
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id)
-{
- unsigned long flags;
-
- /*
- * Nothing to do for this IRQ.
- */
- if (!desc->hw.ack_regs)
- return;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- ack_handle[irq] = intc_ack_data(desc, d, id);
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-unsigned long intc_get_ack_handle(unsigned int irq)
-{
- return ack_handle[irq];
-}
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
deleted file mode 100644
index fa73c173b56a60..00000000000000
--- a/drivers/sh/intc/internals.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/sh_intc.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/list.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/radix-tree.h>
-#include <linux/device.h>
-
-#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
- ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
- ((addr_e) << 16) | ((addr_d << 24)))
-
-#define _INTC_SHIFT(h) (h & 0x1f)
-#define _INTC_WIDTH(h) ((h >> 5) & 0xf)
-#define _INTC_FN(h) ((h >> 9) & 0xf)
-#define _INTC_MODE(h) ((h >> 13) & 0x7)
-#define _INTC_ADDR_E(h) ((h >> 16) & 0xff)
-#define _INTC_ADDR_D(h) ((h >> 24) & 0xff)
-
-#ifdef CONFIG_SMP
-#define IS_SMP(x) (x.smp)
-#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
-#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1)
-#else
-#define IS_SMP(x) 0
-#define INTC_REG(d, x, c) (d->reg[(x)])
-#define SMP_NR(d, x) 1
-#endif
-
-struct intc_handle_int {
- unsigned int irq;
- unsigned long handle;
-};
-
-struct intc_window {
- phys_addr_t phys;
- void __iomem *virt;
- unsigned long size;
-};
-
-struct intc_map_entry {
- intc_enum enum_id;
- struct intc_desc_int *desc;
-};
-
-struct intc_subgroup_entry {
- unsigned int pirq;
- intc_enum enum_id;
- unsigned long handle;
-};
-
-struct intc_desc_int {
- struct list_head list;
- struct device dev;
- struct radix_tree_root tree;
- raw_spinlock_t lock;
- unsigned int index;
- unsigned long *reg;
-#ifdef CONFIG_SMP
- unsigned long *smp;
-#endif
- unsigned int nr_reg;
- struct intc_handle_int *prio;
- unsigned int nr_prio;
- struct intc_handle_int *sense;
- unsigned int nr_sense;
- struct intc_window *window;
- unsigned int nr_windows;
- struct irq_domain *domain;
- struct irq_chip chip;
- bool skip_suspend;
-};
-
-
-enum {
- REG_FN_ERR = 0,
- REG_FN_TEST_BASE = 1,
- REG_FN_WRITE_BASE = 5,
- REG_FN_MODIFY_BASE = 9
-};
-
-enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
- MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */
- MODE_DUAL_REG, /* Two registers, set bit to enable / disable */
- MODE_PRIO_REG, /* Priority value written to enable interrupt */
- MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */
-};
-
-static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
-{
- struct irq_chip *chip = irq_get_chip(irq);
-
- return container_of(chip, struct intc_desc_int, chip);
-}
-
-/*
- * Grumble.
- */
-static inline void activate_irq(int irq)
-{
- irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
-}
-
-static inline int intc_handle_int_cmp(const void *a, const void *b)
-{
- const struct intc_handle_int *_a = a;
- const struct intc_handle_int *_b = b;
-
- return _a->irq - _b->irq;
-}
-
-/* access.c */
-extern unsigned long
-(*intc_reg_fns[])(unsigned long addr, unsigned long h, unsigned long data);
-
-extern unsigned long
-(*intc_enable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_disable_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-extern unsigned long
-(*intc_enable_noprio_fns[])(unsigned long addr, unsigned long handle,
- unsigned long (*fn)(unsigned long,
- unsigned long, unsigned long),
- unsigned int irq);
-
-unsigned long intc_phys_to_virt(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_get_reg(struct intc_desc_int *d, unsigned long address);
-unsigned int intc_set_field_from_handle(unsigned int value,
- unsigned int field_value,
- unsigned int handle);
-unsigned long intc_get_field_from_handle(unsigned int value,
- unsigned int handle);
-
-/* balancing.c */
-#ifdef CONFIG_INTC_BALANCING
-void intc_balancing_enable(unsigned int irq);
-void intc_balancing_disable(unsigned int irq);
-void intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-#else
-static inline void intc_balancing_enable(unsigned int irq) { }
-static inline void intc_balancing_disable(unsigned int irq) { }
-static inline void
-intc_set_dist_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id) { }
-#endif
-
-/* chip.c */
-extern struct irq_chip intc_irq_chip;
-void _intc_enable(struct irq_data *data, unsigned long handle);
-
-/* core.c */
-extern struct list_head intc_list;
-extern raw_spinlock_t intc_big_lock;
-extern struct bus_type intc_subsys;
-
-unsigned int intc_get_dfl_prio_level(void);
-unsigned int intc_get_prio_level(unsigned int irq);
-void intc_set_prio_level(unsigned int irq, unsigned int level);
-
-/* handle.c */
-unsigned int intc_get_mask_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_prio_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id, int do_grps);
-unsigned int intc_get_sense_handle(struct intc_desc *desc,
- struct intc_desc_int *d,
- intc_enum enum_id);
-void intc_set_ack_handle(unsigned int irq, struct intc_desc *desc,
- struct intc_desc_int *d, intc_enum id);
-unsigned long intc_get_ack_handle(unsigned int irq);
-void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d,
- intc_enum enum_id, int enable);
-
-/* irqdomain.c */
-void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw);
-
-/* virq.c */
-void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d);
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d);
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq);
diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c
deleted file mode 100644
index 3968f1c3c5c308..00000000000000
--- a/drivers/sh/intc/irqdomain.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * IRQ domain support for SH INTC subsystem
- *
- * Copyright (C) 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/irqdomain.h>
-#include <linux/sh_intc.h>
-#include <linux/export.h>
-#include "internals.h"
-
-/**
- * intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs.
- *
- * This takes care of exception vector to hwirq translation through
- * by way of evt2irq() translation.
- *
- * Note: For platforms that use a flat vector space without INTEVT this
- * basically just mimics irq_domain_xlate_onecell() by way of a nopped
- * out evt2irq() implementation.
- */
-static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr,
- const u32 *intspec, unsigned int intsize,
- unsigned long *out_hwirq, unsigned int *out_type)
-{
- if (WARN_ON(intsize < 1))
- return -EINVAL;
-
- *out_hwirq = evt2irq(intspec[0]);
- *out_type = IRQ_TYPE_NONE;
-
- return 0;
-}
-
-static const struct irq_domain_ops intc_evt_ops = {
- .xlate = intc_evt_xlate,
-};
-
-void __init intc_irq_domain_init(struct intc_desc_int *d,
- struct intc_hw_desc *hw)
-{
- unsigned int irq_base, irq_end;
-
- /*
- * Quick linear revmap check
- */
- irq_base = evt2irq(hw->vectors[0].vect);
- irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect);
-
- /*
- * Linear domains have a hard-wired assertion that IRQs start at
- * 0 in order to make some performance optimizations. Lamely
- * restrict the linear case to these conditions here, taking the
- * tree penalty for linear cases with non-zero hwirq bases.
- */
- if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
- d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
- &intc_evt_ops, NULL);
- else
- d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
-
- BUG_ON(!d->domain);
-}
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
deleted file mode 100644
index f9f043a3d90a23..00000000000000
--- a/drivers/sh/intc/userimask.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Support for hardware-assisted userspace interrupt masking.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/stat.h>
-#include <linux/sizes.h>
-#include "internals.h"
-
-static void __iomem *uimask;
-
-static ssize_t
-show_intc_userimask(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", (__raw_readl(uimask) >> 4) & 0xf);
-}
-
-static ssize_t
-store_intc_userimask(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned long level;
-
- level = simple_strtoul(buf, NULL, 10);
-
- /*
- * Minimal acceptable IRQ levels are in the 2 - 16 range, but
- * these are chomped so as to not interfere with normal IRQs.
- *
- * Level 1 is a special case on some CPUs in that it's not
- * directly settable, but given that USERIMASK cuts off below a
- * certain level, we don't care about this limitation here.
- * Level 0 on the other hand equates to user masking disabled.
- *
- * We use the default priority level as a cut off so that only
- * special case opt-in IRQs can be mangled.
- */
- if (level >= intc_get_dfl_prio_level())
- return -EINVAL;
-
- __raw_writel(0xa5 << 24 | level << 4, uimask);
-
- return count;
-}
-
-static DEVICE_ATTR(userimask, S_IRUSR | S_IWUSR,
- show_intc_userimask, store_intc_userimask);
-
-
-static int __init userimask_sysdev_init(void)
-{
- if (unlikely(!uimask))
- return -ENXIO;
-
- return device_create_file(intc_subsys.dev_root, &dev_attr_userimask);
-}
-late_initcall(userimask_sysdev_init);
-
-int register_intc_userimask(unsigned long addr)
-{
- if (unlikely(uimask))
- return -EBUSY;
-
- uimask = ioremap(addr, SZ_4K);
- if (unlikely(!uimask))
- return -ENOMEM;
-
- pr_info("userimask support registered for levels 0 -> %d\n",
- intc_get_dfl_prio_level() - 1);
-
- return 0;
-}
diff --git a/drivers/sh/intc/virq-debugfs.c b/drivers/sh/intc/virq-debugfs.c
deleted file mode 100644
index 939915a07d9997..00000000000000
--- a/drivers/sh/intc/virq-debugfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Support for virtual IRQ subgroups debugfs mapping.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Modelled after arch/powerpc/kernel/irq.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/seq_file.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include "internals.h"
-
-static int intc_irq_xlate_show(struct seq_file *m, void *priv)
-{
- int i;
-
- seq_printf(m, "%-5s %-7s %-15s\n", "irq", "enum", "chip name");
-
- for (i = 1; i < nr_irqs; i++) {
- struct intc_map_entry *entry = intc_irq_xlate_get(i);
- struct intc_desc_int *desc = entry->desc;
-
- if (!desc)
- continue;
-
- seq_printf(m, "%5d ", i);
- seq_printf(m, "0x%05x ", entry->enum_id);
- seq_printf(m, "%-15s\n", desc->chip.name);
- }
-
- return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(intc_irq_xlate);
-
-static int __init intc_irq_xlate_init(void)
-{
- /*
- * XXX.. use arch_debugfs_dir here when all of the intc users are
- * converted.
- */
- if (debugfs_create_file("intc_irq_xlate", S_IRUGO, NULL, NULL,
- &intc_irq_xlate_fops) == NULL)
- return -ENOMEM;
-
- return 0;
-}
-fs_initcall(intc_irq_xlate_init);
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
deleted file mode 100644
index a638c3048207c0..00000000000000
--- a/drivers/sh/intc/virq.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Support for virtual IRQ subgroups.
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-#include "internals.h"
-
-static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS];
-
-struct intc_virq_list {
- unsigned int irq;
- struct intc_virq_list *next;
-};
-
-#define for_each_virq(entry, head) \
- for (entry = head; entry; entry = entry->next)
-
-/*
- * Tags for the radix tree
- */
-#define INTC_TAG_VIRQ_NEEDS_ALLOC 0
-
-void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&intc_big_lock, flags);
- intc_irq_xlate[irq].enum_id = id;
- intc_irq_xlate[irq].desc = d;
- raw_spin_unlock_irqrestore(&intc_big_lock, flags);
-}
-
-struct intc_map_entry *intc_irq_xlate_get(unsigned int irq)
-{
- return intc_irq_xlate + irq;
-}
-
-int intc_irq_lookup(const char *chipname, intc_enum enum_id)
-{
- struct intc_map_entry *ptr;
- struct intc_desc_int *d;
- int irq = -1;
-
- list_for_each_entry(d, &intc_list, list) {
- int tagged;
-
- if (strcmp(d->chip.name, chipname) != 0)
- continue;
-
- /*
- * Catch early lookups for subgroup VIRQs that have not
- * yet been allocated an IRQ. This already includes a
- * fast-path out if the tree is untagged, so there is no
- * need to explicitly test the root tree.
- */
- tagged = radix_tree_tag_get(&d->tree, enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- if (unlikely(tagged))
- break;
-
- ptr = radix_tree_lookup(&d->tree, enum_id);
- if (ptr) {
- irq = ptr - intc_irq_xlate;
- break;
- }
- }
-
- return irq;
-}
-EXPORT_SYMBOL_GPL(intc_irq_lookup);
-
-static int add_virq_to_pirq(unsigned int irq, unsigned int virq)
-{
- struct intc_virq_list *entry;
- struct intc_virq_list **last = NULL;
-
- /* scan for duplicates */
- for_each_virq(entry, irq_get_handler_data(irq)) {
- if (entry->irq == virq)
- return 0;
- last = &entry->next;
- }
-
- entry = kzalloc(sizeof(struct intc_virq_list), GFP_ATOMIC);
- if (!entry)
- return -ENOMEM;
-
- entry->irq = virq;
-
- if (last)
- *last = entry;
- else
- irq_set_handler_data(irq, entry);
-
- return 0;
-}
-
-static void intc_virq_handler(struct irq_desc *desc)
-{
- unsigned int irq = irq_desc_get_irq(desc);
- struct irq_data *data = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_irq_chip(data);
- struct intc_virq_list *entry, *vlist = irq_data_get_irq_handler_data(data);
- struct intc_desc_int *d = get_intc_desc(irq);
-
- chip->irq_mask_ack(data);
-
- for_each_virq(entry, vlist) {
- unsigned long addr, handle;
- struct irq_desc *vdesc = irq_to_desc(entry->irq);
-
- if (vdesc) {
- handle = (unsigned long)irq_desc_get_handler_data(vdesc);
- addr = INTC_REG(d, _INTC_ADDR_E(handle), 0);
- if (intc_reg_fns[_INTC_FN(handle)](addr, handle, 0))
- generic_handle_irq_desc(vdesc);
- }
- }
-
- chip->irq_unmask(data);
-}
-
-static unsigned long __init intc_subgroup_data(struct intc_subgroup *subgroup,
- struct intc_desc_int *d,
- unsigned int index)
-{
- unsigned int fn = REG_FN_TEST_BASE + (subgroup->reg_width >> 3) - 1;
-
- return _INTC_MK(fn, MODE_ENABLE_REG, intc_get_reg(d, subgroup->reg),
- 0, 1, (subgroup->reg_width - 1) - index);
-}
-
-static void __init intc_subgroup_init_one(struct intc_desc *desc,
- struct intc_desc_int *d,
- struct intc_subgroup *subgroup)
-{
- struct intc_map_entry *mapped;
- unsigned int pirq;
- unsigned long flags;
- int i;
-
- mapped = radix_tree_lookup(&d->tree, subgroup->parent_id);
- if (!mapped) {
- WARN_ON(1);
- return;
- }
-
- pirq = mapped - intc_irq_xlate;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
- for (i = 0; i < ARRAY_SIZE(subgroup->enum_ids); i++) {
- struct intc_subgroup_entry *entry;
- int err;
-
- if (!subgroup->enum_ids[i])
- continue;
-
- entry = kmalloc(sizeof(*entry), GFP_NOWAIT);
- if (!entry)
- break;
-
- entry->pirq = pirq;
- entry->enum_id = subgroup->enum_ids[i];
- entry->handle = intc_subgroup_data(subgroup, d, i);
-
- err = radix_tree_insert(&d->tree, entry->enum_id, entry);
- if (unlikely(err < 0))
- break;
-
- radix_tree_tag_set(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d)
-{
- int i;
-
- if (!desc->hw.subgroups)
- return;
-
- for (i = 0; i < desc->hw.nr_subgroups; i++)
- intc_subgroup_init_one(desc, d, desc->hw.subgroups + i);
-}
-
-static void __init intc_subgroup_map(struct intc_desc_int *d)
-{
- struct intc_subgroup_entry *entries[32];
- unsigned long flags;
- unsigned int nr_found;
- int i;
-
- raw_spin_lock_irqsave(&d->lock, flags);
-
-restart:
- nr_found = radix_tree_gang_lookup_tag_slot(&d->tree,
- (void ***)entries, 0, ARRAY_SIZE(entries),
- INTC_TAG_VIRQ_NEEDS_ALLOC);
-
- for (i = 0; i < nr_found; i++) {
- struct intc_subgroup_entry *entry;
- int irq;
-
- entry = radix_tree_deref_slot((void **)entries[i]);
- if (unlikely(!entry))
- continue;
- if (radix_tree_deref_retry(entry))
- goto restart;
-
- irq = irq_alloc_desc(numa_node_id());
- if (unlikely(irq < 0)) {
- pr_err("no more free IRQs, bailing..\n");
- break;
- }
-
- activate_irq(irq);
-
- pr_info("Setting up a chained VIRQ from %d -> %d\n",
- irq, entry->pirq);
-
- intc_irq_xlate_set(irq, entry->enum_id, d);
-
- irq_set_chip_and_handler_name(irq, irq_get_chip(entry->pirq),
- handle_simple_irq, "virq");
- irq_set_chip_data(irq, irq_get_chip_data(entry->pirq));
-
- irq_set_handler_data(irq, (void *)entry->handle);
-
- /*
- * Set the virtual IRQ as non-threadable.
- */
- irq_set_nothread(irq);
-
- /* Set handler data before installing the handler */
- add_virq_to_pirq(entry->pirq, irq);
- irq_set_chained_handler(entry->pirq, intc_virq_handler);
-
- radix_tree_tag_clear(&d->tree, entry->enum_id,
- INTC_TAG_VIRQ_NEEDS_ALLOC);
- radix_tree_replace_slot(&d->tree, (void **)entries[i],
- &intc_irq_xlate[irq]);
- }
-
- raw_spin_unlock_irqrestore(&d->lock, flags);
-}
-
-void __init intc_finalize(void)
-{
- struct intc_desc_int *d;
-
- list_for_each_entry(d, &intc_list, list)
- if (radix_tree_tagged(&d->tree, INTC_TAG_VIRQ_NEEDS_ALLOC))
- intc_subgroup_map(d);
-}
diff --git a/drivers/sh/maple/Makefile b/drivers/sh/maple/Makefile
deleted file mode 100644
index c3a80910c212ce..00000000000000
--- a/drivers/sh/maple/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for Maple Bus
-
-obj-$(CONFIG_MAPLE) := maple.o
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
deleted file mode 100644
index e24e220e56eea1..00000000000000
--- a/drivers/sh/maple/maple.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * Core maple bus functionality
- *
- * Copyright (C) 2007 - 2009 Adrian McMenamin
- * Copyright (C) 2001 - 2008 Paul Mundt
- * Copyright (C) 2000 - 2001 YAEGASHI Takeshi
- * Copyright (C) 2001 M. R. Brown
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/maple.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <mach/dma.h>
-#include <mach/sysasic.h>
-
-MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
-MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
-MODULE_LICENSE("GPL v2");
-
-static void maple_dma_handler(struct work_struct *work);
-static void maple_vblank_handler(struct work_struct *work);
-
-static DECLARE_WORK(maple_dma_process, maple_dma_handler);
-static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
-
-static LIST_HEAD(maple_waitq);
-static LIST_HEAD(maple_sentq);
-
-/* mutex to protect queue of waiting packets */
-static DEFINE_MUTEX(maple_wlist_lock);
-
-static struct maple_driver maple_unsupported_device;
-static struct device maple_bus;
-static int subdevice_map[MAPLE_PORTS];
-static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
-static unsigned long maple_pnp_time;
-static int started, scanning, fullscan;
-static struct kmem_cache *maple_queue_cache;
-
-struct maple_device_specify {
- int port;
- int unit;
-};
-
-static bool checked[MAPLE_PORTS];
-static bool empty[MAPLE_PORTS];
-static struct maple_device *baseunits[MAPLE_PORTS];
-
-/**
- * maple_driver_register - register a maple driver
- * @drv: maple driver to be registered.
- *
- * Registers the passed in @drv, while updating the bus type.
- * Devices with matching function IDs will be automatically probed.
- */
-int maple_driver_register(struct maple_driver *drv)
-{
- if (!drv)
- return -EINVAL;
-
- drv->drv.bus = &maple_bus_type;
-
- return driver_register(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_register);
-
-/**
- * maple_driver_unregister - unregister a maple driver.
- * @drv: maple driver to unregister.
- *
- * Cleans up after maple_driver_register(). To be invoked in the exit
- * path of any module drivers.
- */
-void maple_driver_unregister(struct maple_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-EXPORT_SYMBOL_GPL(maple_driver_unregister);
-
-/* set hardware registers to enable next round of dma */
-static void maple_dma_reset(void)
-{
- __raw_writel(MAPLE_MAGIC, MAPLE_RESET);
- /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */
- __raw_writel(1, MAPLE_TRIGTYPE);
- /*
- * Maple system register
- * bits 31 - 16 timeout in units of 20nsec
- * bit 12 hard trigger - set 0 to keep responding to VBLANK
- * bits 9 - 8 set 00 for 2 Mbps, 01 for 1 Mbps
- * bits 3 - 0 delay (in 1.3ms) between VBLANK and start of DMA
- * max delay is 11
- */
- __raw_writel(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED);
- __raw_writel(virt_to_phys(maple_sendbuf), MAPLE_DMAADDR);
- __raw_writel(1, MAPLE_ENABLE);
-}
-
-/**
- * maple_getcond_callback - setup handling MAPLE_COMMAND_GETCOND
- * @dev: device responding
- * @callback: handler callback
- * @interval: interval in jiffies between callbacks
- * @function: the function code for the device
- */
-void maple_getcond_callback(struct maple_device *dev,
- void (*callback) (struct mapleq *mq),
- unsigned long interval, unsigned long function)
-{
- dev->callback = callback;
- dev->interval = interval;
- dev->function = cpu_to_be32(function);
- dev->when = jiffies;
-}
-EXPORT_SYMBOL_GPL(maple_getcond_callback);
-
-static int maple_dma_done(void)
-{
- return (__raw_readl(MAPLE_STATE) & 1) == 0;
-}
-
-static void maple_release_device(struct device *dev)
-{
- struct maple_device *mdev;
- struct mapleq *mq;
-
- mdev = to_maple_dev(dev);
- mq = mdev->mq;
- kmem_cache_free(maple_queue_cache, mq->recvbuf);
- kfree(mq);
- kfree(mdev);
-}
-
-/**
- * maple_add_packet - add a single instruction to the maple bus queue
- * @mdev: maple device
- * @function: function on device being queried
- * @command: maple command to add
- * @length: length of command string (in 32 bit words)
- * @data: remainder of command string
- */
-int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
- size_t length, void *data)
-{
- int ret = 0;
- void *sendbuf = NULL;
-
- if (length) {
- sendbuf = kcalloc(length, 4, GFP_KERNEL);
- if (!sendbuf) {
- ret = -ENOMEM;
- goto out;
- }
- ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
- }
-
- mdev->mq->command = command;
- mdev->mq->length = length;
- if (length > 1)
- memcpy(sendbuf + 4, data, (length - 1) * 4);
- mdev->mq->sendbuf = sendbuf;
-
- mutex_lock(&maple_wlist_lock);
- list_add_tail(&mdev->mq->list, &maple_waitq);
- mutex_unlock(&maple_wlist_lock);
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(maple_add_packet);
-
-static struct mapleq *maple_allocq(struct maple_device *mdev)
-{
- struct mapleq *mq;
-
- mq = kzalloc(sizeof(*mq), GFP_KERNEL);
- if (!mq)
- goto failed_nomem;
-
- INIT_LIST_HEAD(&mq->list);
- mq->dev = mdev;
- mq->recvbuf = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
- if (!mq->recvbuf)
- goto failed_p2;
- mq->recvbuf->buf = &((mq->recvbuf->bufx)[0]);
-
- return mq;
-
-failed_p2:
- kfree(mq);
-failed_nomem:
- dev_err(&mdev->dev, "could not allocate memory for device (%d, %d)\n",
- mdev->port, mdev->unit);
- return NULL;
-}
-
-static struct maple_device *maple_alloc_dev(int port, int unit)
-{
- struct maple_device *mdev;
-
- /* zero this out to avoid kobj subsystem
- * thinking it has already been registered */
-
- mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
- if (!mdev)
- return NULL;
-
- mdev->port = port;
- mdev->unit = unit;
-
- mdev->mq = maple_allocq(mdev);
-
- if (!mdev->mq) {
- kfree(mdev);
- return NULL;
- }
- mdev->dev.bus = &maple_bus_type;
- mdev->dev.parent = &maple_bus;
- init_waitqueue_head(&mdev->maple_wait);
- return mdev;
-}
-
-static void maple_free_dev(struct maple_device *mdev)
-{
- kmem_cache_free(maple_queue_cache, mdev->mq->recvbuf);
- kfree(mdev->mq);
- kfree(mdev);
-}
-
-/* process the command queue into a maple command block
- * terminating command has bit 32 of first long set to 0
- */
-static void maple_build_block(struct mapleq *mq)
-{
- int port, unit, from, to, len;
- unsigned long *lsendbuf = mq->sendbuf;
-
- port = mq->dev->port & 3;
- unit = mq->dev->unit;
- len = mq->length;
- from = port << 6;
- to = (port << 6) | (unit > 0 ? (1 << (unit - 1)) & 0x1f : 0x20);
-
- *maple_lastptr &= 0x7fffffff;
- maple_lastptr = maple_sendptr;
-
- *maple_sendptr++ = (port << 16) | len | 0x80000000;
- *maple_sendptr++ = virt_to_phys(mq->recvbuf->buf);
- *maple_sendptr++ =
- mq->command | (to << 8) | (from << 16) | (len << 24);
- while (len-- > 0)
- *maple_sendptr++ = *lsendbuf++;
-}
-
-/* build up command queue */
-static void maple_send(void)
-{
- int i, maple_packets = 0;
- struct mapleq *mq, *nmq;
-
- if (!maple_dma_done())
- return;
-
- /* disable DMA */
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- mutex_lock(&maple_wlist_lock);
- if (list_empty(&maple_waitq)) {
- mutex_unlock(&maple_wlist_lock);
- goto finish;
- }
-
- maple_lastptr = maple_sendbuf;
- maple_sendptr = maple_sendbuf;
-
- list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
- maple_build_block(mq);
- list_del_init(&mq->list);
- list_add_tail(&mq->list, &maple_sentq);
- if (maple_packets++ > MAPLE_MAXPACKETS)
- break;
- }
- mutex_unlock(&maple_wlist_lock);
- if (maple_packets > 0) {
- for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
- __flush_purge_region(maple_sendbuf + i * PAGE_SIZE,
- PAGE_SIZE);
- }
-
-finish:
- maple_dma_reset();
-}
-
-/* check if there is a driver registered likely to match this device */
-static int maple_check_matching_driver(struct device_driver *driver,
- void *devptr)
-{
- struct maple_driver *maple_drv;
- struct maple_device *mdev;
-
- mdev = devptr;
- maple_drv = to_maple_driver(driver);
- if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static void maple_detach_driver(struct maple_device *mdev)
-{
- device_unregister(&mdev->dev);
-}
-
-/* process initial MAPLE_COMMAND_DEVINFO for each device or port */
-static void maple_attach_driver(struct maple_device *mdev)
-{
- char *p, *recvbuf;
- unsigned long function;
- int matched, error;
-
- recvbuf = mdev->mq->recvbuf->buf;
- /* copy the data as individual elements in
- * case of memory optimisation */
- memcpy(&mdev->devinfo.function, recvbuf + 4, 4);
- memcpy(&mdev->devinfo.function_data[0], recvbuf + 8, 12);
- memcpy(&mdev->devinfo.area_code, recvbuf + 20, 1);
- memcpy(&mdev->devinfo.connector_direction, recvbuf + 21, 1);
- memcpy(&mdev->devinfo.product_name[0], recvbuf + 22, 30);
- memcpy(&mdev->devinfo.standby_power, recvbuf + 112, 2);
- memcpy(&mdev->devinfo.max_power, recvbuf + 114, 2);
- memcpy(mdev->product_name, mdev->devinfo.product_name, 30);
- mdev->product_name[30] = '\0';
- memcpy(mdev->product_licence, mdev->devinfo.product_licence, 60);
- mdev->product_licence[60] = '\0';
-
- for (p = mdev->product_name + 29; mdev->product_name <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
- for (p = mdev->product_licence + 59; mdev->product_licence <= p; p--)
- if (*p == ' ')
- *p = '\0';
- else
- break;
-
- function = be32_to_cpu(mdev->devinfo.function);
-
- dev_info(&mdev->dev, "detected %s: function 0x%lX: at (%d, %d)\n",
- mdev->product_name, function, mdev->port, mdev->unit);
-
- if (function > 0x200) {
- /* Do this silently - as not a real device */
- function = 0;
- mdev->driver = &maple_unsupported_device;
- dev_set_name(&mdev->dev, "%d:0.port", mdev->port);
- } else {
- matched =
- bus_for_each_drv(&maple_bus_type, NULL, mdev,
- maple_check_matching_driver);
-
- if (matched == 0) {
- /* Driver does not exist yet */
- dev_info(&mdev->dev, "no driver found\n");
- mdev->driver = &maple_unsupported_device;
- }
- dev_set_name(&mdev->dev, "%d:0%d.%lX", mdev->port,
- mdev->unit, function);
- }
-
- mdev->function = function;
- mdev->dev.release = &maple_release_device;
-
- atomic_set(&mdev->busy, 0);
- error = device_register(&mdev->dev);
- if (error) {
- dev_warn(&mdev->dev, "could not register device at"
- " (%d, %d), with error 0x%X\n", mdev->unit,
- mdev->port, error);
- maple_free_dev(mdev);
- mdev = NULL;
- return;
- }
-}
-
-/*
- * if device has been registered for the given
- * port and unit then return 1 - allows identification
- * of which devices need to be attached or detached
- */
-static int check_maple_device(struct device *device, void *portptr)
-{
- struct maple_device_specify *ds;
- struct maple_device *mdev;
-
- ds = portptr;
- mdev = to_maple_dev(device);
- if (mdev->port == ds->port && mdev->unit == ds->unit)
- return 1;
- return 0;
-}
-
-static int setup_maple_commands(struct device *device, void *ignored)
-{
- int add;
- struct maple_device *mdev = to_maple_dev(device);
- if (mdev->interval > 0 && atomic_read(&mdev->busy) == 0 &&
- time_after(jiffies, mdev->when)) {
- /* bounce if we cannot add */
- add = maple_add_packet(mdev,
- be32_to_cpu(mdev->devinfo.function),
- MAPLE_COMMAND_GETCOND, 1, NULL);
- if (!add)
- mdev->when = jiffies + mdev->interval;
- } else {
- if (time_after(jiffies, maple_pnp_time))
- /* Ensure we don't have block reads and devinfo
- * calls interfering with one another - so flag the
- * device as busy */
- if (atomic_read(&mdev->busy) == 0) {
- atomic_set(&mdev->busy, 1);
- maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- }
- }
- return 0;
-}
-
-/* VBLANK bottom half - implemented via workqueue */
-static void maple_vblank_handler(struct work_struct *work)
-{
- int x, locking;
- struct maple_device *mdev;
-
- if (!maple_dma_done())
- return;
-
- __raw_writel(0, MAPLE_ENABLE);
-
- if (!list_empty(&maple_sentq))
- goto finish;
-
- /*
- * Set up essential commands - to fetch data and
- * check devices are still present
- */
- bus_for_each_dev(&maple_bus_type, NULL, NULL,
- setup_maple_commands);
-
- if (time_after(jiffies, maple_pnp_time)) {
- /*
- * Scan the empty ports - bus is flakey and may have
- * mis-reported emptyness
- */
- for (x = 0; x < MAPLE_PORTS; x++) {
- if (checked[x] && empty[x]) {
- mdev = baseunits[x];
- if (!mdev)
- break;
- atomic_set(&mdev->busy, 1);
- locking = maple_add_packet(mdev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
- if (!locking)
- break;
- }
- }
-
- maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
- }
-
-finish:
- maple_send();
-}
-
-/* handle devices added via hotplugs - placing them on queue for DEVINFO */
-static void maple_map_subunits(struct maple_device *mdev, int submask)
-{
- int retval, k, devcheck;
- struct maple_device *mdev_add;
- struct maple_device_specify ds;
-
- ds.port = mdev->port;
- for (k = 0; k < 5; k++) {
- ds.unit = k + 1;
- retval =
- bus_for_each_dev(&maple_bus_type, NULL, &ds,
- check_maple_device);
- if (retval) {
- submask = submask >> 1;
- continue;
- }
- devcheck = submask & 0x01;
- if (devcheck) {
- mdev_add = maple_alloc_dev(mdev->port, k + 1);
- if (!mdev_add)
- return;
- atomic_set(&mdev_add->busy, 1);
- maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- /* mark that we are checking sub devices */
- scanning = 1;
- }
- submask = submask >> 1;
- }
-}
-
-/* mark a device as removed */
-static void maple_clean_submap(struct maple_device *mdev)
-{
- int killbit;
-
- killbit = (mdev->unit > 0 ? (1 << (mdev->unit - 1)) & 0x1f : 0x20);
- killbit = ~killbit;
- killbit &= 0xFF;
- subdevice_map[mdev->port] = subdevice_map[mdev->port] & killbit;
-}
-
-/* handle empty port or hotplug removal */
-static void maple_response_none(struct maple_device *mdev)
-{
- maple_clean_submap(mdev);
-
- if (likely(mdev->unit != 0)) {
- /*
- * Block devices play up
- * and give the impression they have
- * been removed even when still in place or
- * trip the mtd layer when they have
- * really gone - this code traps that eventuality
- * and ensures we aren't overloaded with useless
- * error messages
- */
- if (mdev->can_unload) {
- if (!mdev->can_unload(mdev)) {
- atomic_set(&mdev->busy, 2);
- wake_up(&mdev->maple_wait);
- return;
- }
- }
-
- dev_info(&mdev->dev, "detaching device at (%d, %d)\n",
- mdev->port, mdev->unit);
- maple_detach_driver(mdev);
- return;
- } else {
- if (!started || !fullscan) {
- if (checked[mdev->port] == false) {
- checked[mdev->port] = true;
- empty[mdev->port] = true;
- dev_info(&mdev->dev, "no devices"
- " to port %d\n", mdev->port);
- }
- return;
- }
- }
- /* Some hardware devices generate false detach messages on unit 0 */
- atomic_set(&mdev->busy, 0);
-}
-
-/* preprocess hotplugs or scans */
-static void maple_response_devinfo(struct maple_device *mdev,
- char *recvbuf)
-{
- char submask;
- if (!started || (scanning == 2) || !fullscan) {
- if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
- checked[mdev->port] = true;
- maple_attach_driver(mdev);
- } else {
- if (mdev->unit != 0)
- maple_attach_driver(mdev);
- if (mdev->unit == 0) {
- empty[mdev->port] = false;
- maple_attach_driver(mdev);
- }
- }
- }
- if (mdev->unit == 0) {
- submask = recvbuf[2] & 0x1F;
- if (submask ^ subdevice_map[mdev->port]) {
- maple_map_subunits(mdev, submask);
- subdevice_map[mdev->port] = submask;
- }
- }
-}
-
-static void maple_response_fileerr(struct maple_device *mdev, void *recvbuf)
-{
- if (mdev->fileerr_handler) {
- mdev->fileerr_handler(mdev, recvbuf);
- return;
- } else
- dev_warn(&mdev->dev, "device at (%d, %d) reports"
- "file error 0x%X\n", mdev->port, mdev->unit,
- ((int *)recvbuf)[1]);
-}
-
-static void maple_port_rescan(void)
-{
- int i;
- struct maple_device *mdev;
-
- fullscan = 1;
- for (i = 0; i < MAPLE_PORTS; i++) {
- if (checked[i] == false) {
- fullscan = 0;
- mdev = baseunits[i];
- maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
- 0, NULL);
- }
- }
-}
-
-/* maple dma end bottom half - implemented via workqueue */
-static void maple_dma_handler(struct work_struct *work)
-{
- struct mapleq *mq, *nmq;
- struct maple_device *mdev;
- char *recvbuf;
- enum maple_code code;
-
- if (!maple_dma_done())
- return;
- __raw_writel(0, MAPLE_ENABLE);
- if (!list_empty(&maple_sentq)) {
- list_for_each_entry_safe(mq, nmq, &maple_sentq, list) {
- mdev = mq->dev;
- recvbuf = mq->recvbuf->buf;
- __flush_invalidate_region(sh_cacheop_vaddr(recvbuf),
- 0x400);
- code = recvbuf[0];
- kfree(mq->sendbuf);
- list_del_init(&mq->list);
- switch (code) {
- case MAPLE_RESPONSE_NONE:
- maple_response_none(mdev);
- break;
-
- case MAPLE_RESPONSE_DEVINFO:
- maple_response_devinfo(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_DATATRF:
- if (mdev->callback)
- mdev->callback(mq);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_FILEERR:
- maple_response_fileerr(mdev, recvbuf);
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- case MAPLE_RESPONSE_AGAIN:
- case MAPLE_RESPONSE_BADCMD:
- case MAPLE_RESPONSE_BADFUNC:
- dev_warn(&mdev->dev, "non-fatal error"
- " 0x%X at (%d, %d)\n", code,
- mdev->port, mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_ALLINFO:
- dev_notice(&mdev->dev, "extended"
- " device information request for (%d, %d)"
- " but call is not supported\n", mdev->port,
- mdev->unit);
- atomic_set(&mdev->busy, 0);
- break;
-
- case MAPLE_RESPONSE_OK:
- atomic_set(&mdev->busy, 0);
- wake_up(&mdev->maple_wait);
- break;
-
- default:
- break;
- }
- }
- /* if scanning is 1 then we have subdevices to check */
- if (scanning == 1) {
- maple_send();
- scanning = 2;
- } else
- scanning = 0;
- /*check if we have actually tested all ports yet */
- if (!fullscan)
- maple_port_rescan();
- /* mark that we have been through the first scan */
- started = 1;
- }
- maple_send();
-}
-
-static irqreturn_t maple_dma_interrupt(int irq, void *dev_id)
-{
- /* Load everything into the bottom half */
- schedule_work(&maple_dma_process);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t maple_vblank_interrupt(int irq, void *dev_id)
-{
- schedule_work(&maple_vblank_process);
- return IRQ_HANDLED;
-}
-
-static int maple_set_dma_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_MAPLE_DMA, maple_dma_interrupt,
- IRQF_SHARED, "maple bus DMA", &maple_unsupported_device);
-}
-
-static int maple_set_vblank_interrupt_handler(void)
-{
- return request_irq(HW_EVENT_VSYNC, maple_vblank_interrupt,
- IRQF_SHARED, "maple bus VBLANK", &maple_unsupported_device);
-}
-
-static int maple_get_dma_buffer(void)
-{
- maple_sendbuf =
- (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
- MAPLE_DMA_PAGES);
- if (!maple_sendbuf)
- return -ENOMEM;
- return 0;
-}
-
-static int maple_match_bus_driver(struct device *devptr,
- struct device_driver *drvptr)
-{
- struct maple_driver *maple_drv = to_maple_driver(drvptr);
- struct maple_device *maple_dev = to_maple_dev(devptr);
-
- /* Trap empty port case */
- if (maple_dev->devinfo.function == 0xFFFFFFFF)
- return 0;
- else if (maple_dev->devinfo.function &
- cpu_to_be32(maple_drv->function))
- return 1;
- return 0;
-}
-
-static int maple_bus_uevent(struct device *dev,
- struct kobj_uevent_env *env)
-{
- return 0;
-}
-
-static void maple_bus_release(struct device *dev)
-{
-}
-
-static struct maple_driver maple_unsupported_device = {
- .drv = {
- .name = "maple_unsupported_device",
- .bus = &maple_bus_type,
- },
-};
-/*
- * maple_bus_type - core maple bus structure
- */
-struct bus_type maple_bus_type = {
- .name = "maple",
- .match = maple_match_bus_driver,
- .uevent = maple_bus_uevent,
-};
-EXPORT_SYMBOL_GPL(maple_bus_type);
-
-static struct device maple_bus = {
- .init_name = "maple",
- .release = maple_bus_release,
-};
-
-static int __init maple_bus_init(void)
-{
- int retval, i;
- struct maple_device *mdev[MAPLE_PORTS];
-
- __raw_writel(0, MAPLE_ENABLE);
-
- retval = device_register(&maple_bus);
- if (retval)
- goto cleanup;
-
- retval = bus_register(&maple_bus_type);
- if (retval)
- goto cleanup_device;
-
- retval = driver_register(&maple_unsupported_device.drv);
- if (retval)
- goto cleanup_bus;
-
- /* allocate memory for maple bus dma */
- retval = maple_get_dma_buffer();
- if (retval) {
- dev_err(&maple_bus, "failed to allocate DMA buffers\n");
- goto cleanup_basic;
- }
-
- /* set up DMA interrupt handler */
- retval = maple_set_dma_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab maple "
- "DMA IRQ\n");
- goto cleanup_dma;
- }
-
- /* set up VBLANK interrupt handler */
- retval = maple_set_vblank_interrupt_handler();
- if (retval) {
- dev_err(&maple_bus, "bus failed to grab VBLANK IRQ\n");
- goto cleanup_irq;
- }
-
- maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
-
- if (!maple_queue_cache) {
- retval = -ENOMEM;
- goto cleanup_bothirqs;
- }
-
- INIT_LIST_HEAD(&maple_waitq);
- INIT_LIST_HEAD(&maple_sentq);
-
- /* setup maple ports */
- for (i = 0; i < MAPLE_PORTS; i++) {
- checked[i] = false;
- empty[i] = false;
- mdev[i] = maple_alloc_dev(i, 0);
- if (!mdev[i]) {
- while (i-- > 0)
- maple_free_dev(mdev[i]);
- retval = -ENOMEM;
- goto cleanup_cache;
- }
- baseunits[i] = mdev[i];
- atomic_set(&mdev[i]->busy, 1);
- maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
- subdevice_map[i] = 0;
- }
-
- maple_pnp_time = jiffies + HZ;
- /* prepare initial queue */
- maple_send();
- dev_info(&maple_bus, "bus core now registered\n");
-
- return 0;
-
-cleanup_cache:
- kmem_cache_destroy(maple_queue_cache);
-
-cleanup_bothirqs:
- free_irq(HW_EVENT_VSYNC, 0);
-
-cleanup_irq:
- free_irq(HW_EVENT_MAPLE_DMA, 0);
-
-cleanup_dma:
- free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES);
-
-cleanup_basic:
- driver_unregister(&maple_unsupported_device.drv);
-
-cleanup_bus:
- bus_unregister(&maple_bus_type);
-
-cleanup_device:
- device_unregister(&maple_bus);
-
-cleanup:
- printk(KERN_ERR "Maple bus registration failed\n");
- return retval;
-}
-/* Push init to later to ensure hardware gets detected */
-fs_initcall(maple_bus_init);
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
deleted file mode 100644
index c887ecdaf19b7c..00000000000000
--- a/drivers/sh/pm_runtime.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Runtime PM support code
- *
- * Copyright (C) 2009-2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-
-static struct dev_pm_domain default_pm_domain = {
- .ops = {
- USE_PM_CLK_RUNTIME_OPS
- USE_PLATFORM_PM_SLEEP_OPS
- },
-};
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
- .pm_domain = &default_pm_domain,
- .con_ids = { NULL, },
-};
-
-static int __init sh_pm_runtime_init(void)
-{
- pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
- return 0;
-}
-core_initcall(sh_pm_runtime_init);
diff --git a/drivers/sh/superhyway/Makefile b/drivers/sh/superhyway/Makefile
deleted file mode 100644
index 6dfa41f160af6b..00000000000000
--- a/drivers/sh/superhyway/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the SuperHyway bus drivers.
-#
-
-obj-$(CONFIG_SUPERHYWAY) += superhyway.o
-obj-$(CONFIG_SYSFS) += superhyway-sysfs.o
-
diff --git a/drivers/sh/superhyway/superhyway-sysfs.c b/drivers/sh/superhyway/superhyway-sysfs.c
deleted file mode 100644
index 774f31b564f8f8..00000000000000
--- a/drivers/sh/superhyway/superhyway-sysfs.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway-sysfs.c
- *
- * SuperHyway Bus sysfs interface
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/superhyway.h>
-
-#define superhyway_ro_attr(name, fmt, field) \
-static ssize_t name##_show(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct superhyway_device *s = to_superhyway_device(dev); \
- return sprintf(buf, fmt, s->field); \
-} \
-static DEVICE_ATTR_RO(name);
-
-/* VCR flags */
-superhyway_ro_attr(perr_flags, "0x%02x\n", vcr.perr_flags);
-superhyway_ro_attr(merr_flags, "0x%02x\n", vcr.merr_flags);
-superhyway_ro_attr(mod_vers, "0x%04x\n", vcr.mod_vers);
-superhyway_ro_attr(mod_id, "0x%04x\n", vcr.mod_id);
-superhyway_ro_attr(bot_mb, "0x%02x\n", vcr.bot_mb);
-superhyway_ro_attr(top_mb, "0x%02x\n", vcr.top_mb);
-
-/* Misc */
-superhyway_ro_attr(resource, "0x%08lx\n", resource[0].start);
-
-static struct attribute *superhyway_dev_attrs[] = {
- &dev_attr_perr_flags.attr,
- &dev_attr_merr_flags.attr,
- &dev_attr_mod_vers.attr,
- &dev_attr_mod_id.attr,
- &dev_attr_bot_mb.attr,
- &dev_attr_top_mb.attr,
- &dev_attr_resource.attr,
- NULL,
-};
-
-static const struct attribute_group superhyway_dev_group = {
- .attrs = superhyway_dev_attrs,
-};
-
-const struct attribute_group *superhyway_dev_groups[] = {
- &superhyway_dev_group,
- NULL,
-};
diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c
deleted file mode 100644
index 44324abe21dada..00000000000000
--- a/drivers/sh/superhyway/superhyway.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * drivers/sh/superhyway/superhyway.c
- *
- * SuperHyway Bus Driver
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-static int superhyway_devices;
-
-static struct device superhyway_bus_device = {
- .init_name = "superhyway",
-};
-
-static void superhyway_device_release(struct device *dev)
-{
- struct superhyway_device *sdev = to_superhyway_device(dev);
-
- kfree(sdev->resource);
- kfree(sdev);
-}
-
-/**
- * superhyway_add_device - Add a SuperHyway module
- * @base: Physical address where module is mapped.
- * @sdev: SuperHyway device to add, or NULL to allocate a new one.
- * @bus: Bus where SuperHyway module resides.
- *
- * This is responsible for adding a new SuperHyway module. This sets up a new
- * struct superhyway_device for the module being added if @sdev == NULL.
- *
- * Devices are initially added in the order that they are scanned (from the
- * top-down of the memory map), and are assigned an ID based on the order that
- * they are added. Any manual addition of a module will thus get the ID after
- * the devices already discovered regardless of where it resides in memory.
- *
- * Further work can and should be done in superhyway_scan_bus(), to be sure
- * that any new modules are properly discovered and subsequently registered.
- */
-int superhyway_add_device(unsigned long base, struct superhyway_device *sdev,
- struct superhyway_bus *bus)
-{
- struct superhyway_device *dev = sdev;
-
- if (!dev) {
- dev = kzalloc(sizeof(struct superhyway_device), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- }
-
- dev->bus = bus;
- superhyway_read_vcr(dev, base, &dev->vcr);
-
- if (!dev->resource) {
- dev->resource = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!dev->resource) {
- kfree(dev);
- return -ENOMEM;
- }
-
- dev->resource->name = dev->name;
- dev->resource->start = base;
- dev->resource->end = dev->resource->start + 0x01000000;
- }
-
- dev->dev.parent = &superhyway_bus_device;
- dev->dev.bus = &superhyway_bus_type;
- dev->dev.release = superhyway_device_release;
- dev->id.id = dev->vcr.mod_id;
-
- sprintf(dev->name, "SuperHyway device %04x", dev->id.id);
- dev_set_name(&dev->dev, "%02x", superhyway_devices);
-
- superhyway_devices++;
-
- return device_register(&dev->dev);
-}
-
-int superhyway_add_devices(struct superhyway_bus *bus,
- struct superhyway_device **devices,
- int nr_devices)
-{
- int i, ret = 0;
-
- for (i = 0; i < nr_devices; i++) {
- struct superhyway_device *dev = devices[i];
- ret |= superhyway_add_device(dev->resource[0].start, dev, bus);
- }
-
- return ret;
-}
-
-static int __init superhyway_init(void)
-{
- struct superhyway_bus *bus;
- int ret;
-
- ret = device_register(&superhyway_bus_device);
- if (unlikely(ret))
- return ret;
-
- for (bus = superhyway_channels; bus->ops; bus++)
- ret |= superhyway_scan_bus(bus);
-
- return ret;
-}
-postcore_initcall(superhyway_init);
-
-static const struct superhyway_device_id *
-superhyway_match_id(const struct superhyway_device_id *ids,
- struct superhyway_device *dev)
-{
- while (ids->id) {
- if (ids->id == dev->id.id)
- return ids;
-
- ids++;
- }
-
- return NULL;
-}
-
-static int superhyway_device_probe(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv && shyway_drv->probe) {
- const struct superhyway_device_id *id;
-
- id = superhyway_match_id(shyway_drv->id_table, shyway_dev);
- if (id)
- return shyway_drv->probe(shyway_dev, id);
- }
-
- return -ENODEV;
-}
-
-static void superhyway_device_remove(struct device *dev)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(dev->driver);
-
- if (shyway_drv->remove)
- shyway_drv->remove(shyway_dev);
-}
-
-/**
- * superhyway_register_driver - Register a new SuperHyway driver
- * @drv: SuperHyway driver to register.
- *
- * This registers the passed in @drv. Any devices matching the id table will
- * automatically be populated and handed off to the driver's specified probe
- * routine.
- */
-int superhyway_register_driver(struct superhyway_driver *drv)
-{
- drv->drv.name = drv->name;
- drv->drv.bus = &superhyway_bus_type;
-
- return driver_register(&drv->drv);
-}
-
-/**
- * superhyway_unregister_driver - Unregister a SuperHyway driver
- * @drv: SuperHyway driver to unregister.
- *
- * This cleans up after superhyway_register_driver(), and should be invoked in
- * the exit path of any module drivers.
- */
-void superhyway_unregister_driver(struct superhyway_driver *drv)
-{
- driver_unregister(&drv->drv);
-}
-
-static int superhyway_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct superhyway_device *shyway_dev = to_superhyway_device(dev);
- struct superhyway_driver *shyway_drv = to_superhyway_driver(drv);
- const struct superhyway_device_id *ids = shyway_drv->id_table;
-
- if (!ids)
- return -EINVAL;
- if (superhyway_match_id(ids, shyway_dev))
- return 1;
-
- return -ENODEV;
-}
-
-struct bus_type superhyway_bus_type = {
- .name = "superhyway",
- .match = superhyway_bus_match,
-#ifdef CONFIG_SYSFS
- .dev_groups = superhyway_dev_groups,
-#endif
- .probe = superhyway_device_probe,
- .remove = superhyway_device_remove,
-};
-
-static int __init superhyway_bus_init(void)
-{
- return bus_register(&superhyway_bus_type);
-}
-
-static void __exit superhyway_bus_exit(void)
-{
- device_unregister(&superhyway_bus_device);
- bus_unregister(&superhyway_bus_type);
-}
-
-core_initcall(superhyway_bus_init);
-module_exit(superhyway_bus_exit);
-
-EXPORT_SYMBOL(superhyway_bus_type);
-EXPORT_SYMBOL(superhyway_add_device);
-EXPORT_SYMBOL(superhyway_add_devices);
-EXPORT_SYMBOL(superhyway_register_driver);
-EXPORT_SYMBOL(superhyway_unregister_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
deleted file mode 100644
index 7bed5be886c657..00000000000000
--- a/include/linux/sh_clk.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SH_CLOCK_H
-#define __SH_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-#include <linux/kref.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-struct clk;
-
-struct clk_mapping {
- phys_addr_t phys;
- void __iomem *base;
- unsigned long len;
- struct kref ref;
-};
-
-struct sh_clk_ops {
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
- void (*init)(struct clk *clk);
-#endif
- int (*enable)(struct clk *clk);
- void (*disable)(struct clk *clk);
- unsigned long (*recalc)(struct clk *clk);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*set_parent)(struct clk *clk, struct clk *parent);
- long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1)
-#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4)
-#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6)
-
-struct clk {
- struct list_head node;
- struct clk *parent;
- struct clk **parent_table; /* list of parents to */
- unsigned short parent_num; /* choose between */
- unsigned char src_shift; /* source clock field in the */
- unsigned char src_width; /* configuration register */
- struct sh_clk_ops *ops;
-
- struct list_head children;
- struct list_head sibling; /* node for children */
-
- int usecount;
-
- unsigned long rate;
- unsigned long flags;
-
- void __iomem *enable_reg;
- void __iomem *status_reg;
- unsigned int enable_bit;
- void __iomem *mapped_reg;
-
- unsigned int div_mask;
- unsigned long arch_flags;
- void *priv;
- struct clk_mapping *mapping;
- struct cpufreq_frequency_table *freq_table;
- unsigned int nr_freqs;
-};
-
-#define CLK_ENABLE_ON_INIT BIT(0)
-
-#define CLK_ENABLE_REG_32BIT BIT(1) /* default access size */
-#define CLK_ENABLE_REG_16BIT BIT(2)
-#define CLK_ENABLE_REG_8BIT BIT(3)
-
-#define CLK_MASK_DIV_ON_DISABLE BIT(4)
-
-#define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \
- CLK_ENABLE_REG_16BIT | \
- CLK_ENABLE_REG_8BIT)
-
-/* drivers/sh/clk.c */
-unsigned long followparent_recalc(struct clk *);
-void recalculate_root_clocks(void);
-void propagate_rate(struct clk *);
-int clk_reparent(struct clk *child, struct clk *parent);
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-void clk_enable_init_clocks(void);
-
-struct clk_div_mult_table {
- unsigned int *divisors;
- unsigned int nr_divisors;
- unsigned int *multipliers;
- unsigned int nr_multipliers;
-};
-
-struct cpufreq_frequency_table;
-void clk_rate_table_build(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- int nr_freqs,
- struct clk_div_mult_table *src_table,
- unsigned long *bitmap);
-
-long clk_rate_table_round(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-int clk_rate_table_find(struct clk *clk,
- struct cpufreq_frequency_table *freq_table,
- unsigned long rate);
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
- unsigned int div_max, unsigned long rate);
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
- unsigned int mult_max, unsigned long rate);
-
-#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _status_reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_enable_reg, \
- .enable_bit = _enable_bit, \
- .status_reg = _status_reg, \
- .flags = _flags, \
-}
-
-#define SH_CLK_MSTP32(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP32_STS(_p, _r, _b, _s, _f) \
- SH_CLK_MSTP(_p, _r, _b, _s, _f | CLK_ENABLE_REG_32BIT)
-
-#define SH_CLK_MSTP16(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_16BIT)
-
-#define SH_CLK_MSTP8(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_8BIT)
-
-int sh_clk_mstp_register(struct clk *clks, int nr);
-
-/*
- * MSTP registration never really cared about access size, despite the
- * original enable/disable pairs assuming a 32-bit access. Clocks are
- * responsible for defining their access sizes either directly or via the
- * clock definition wrappers.
- */
-static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr)
-{
- return sh_clk_mstp_register(clks, nr);
-}
-
-#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = _shift, \
- .arch_flags = _div_bitmap, \
- .div_mask = SH_CLK_DIV4_MSK, \
- .flags = _flags, \
-}
-
-struct clk_div_table {
- struct clk_div_mult_table *div_mult_table;
- void (*kick)(struct clk *clk);
-};
-
-#define clk_div4_table clk_div_table
-
-int sh_clk_div4_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_enable_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-int sh_clk_div4_reparent_register(struct clk *clks, int nr,
- struct clk_div4_table *table);
-
-#define SH_CLK_DIV6_EXT(_reg, _flags, _parents, \
- _num_parents, _src_shift, _src_width) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
- .div_mask = SH_CLK_DIV6_MSK, \
- .parent_table = _parents, \
- .parent_num = _num_parents, \
- .src_shift = _src_shift, \
- .src_width = _src_width, \
-}
-
-#define SH_CLK_DIV6(_parent, _reg, _flags) \
-{ \
- .parent = _parent, \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .div_mask = SH_CLK_DIV6_MSK, \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
-}
-
-int sh_clk_div6_register(struct clk *clks, int nr);
-int sh_clk_div6_reparent_register(struct clk *clks, int nr);
-
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
-/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */
-#define SH_CLK_FSIDIV(_reg, _parent) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .parent = _parent, \
-}
-
-int sh_clk_fsidiv_register(struct clk *clks, int nr);
-
-#endif /* __SH_CLOCK_H */
diff --git a/include/linux/superhyway.h b/include/linux/superhyway.h
deleted file mode 100644
index 8d3376775813d3..00000000000000
--- a/include/linux/superhyway.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/linux/superhyway.h
- *
- * SuperHyway Bus definitions
- *
- * Copyright (C) 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __LINUX_SUPERHYWAY_H
-#define __LINUX_SUPERHYWAY_H
-
-#include <linux/device.h>
-
-/*
- * SuperHyway IDs
- */
-#define SUPERHYWAY_DEVICE_ID_SH5_DMAC 0x0183
-
-struct superhyway_vcr_info {
- u8 perr_flags; /* P-port Error flags */
- u8 merr_flags; /* Module Error flags */
- u16 mod_vers; /* Module Version */
- u16 mod_id; /* Module ID */
- u8 bot_mb; /* Bottom Memory block */
- u8 top_mb; /* Top Memory block */
-};
-
-struct superhyway_ops {
- int (*read_vcr)(unsigned long base, struct superhyway_vcr_info *vcr);
- int (*write_vcr)(unsigned long base, struct superhyway_vcr_info vcr);
-};
-
-struct superhyway_bus {
- struct superhyway_ops *ops;
-};
-
-extern struct superhyway_bus superhyway_channels[];
-
-struct superhyway_device_id {
- unsigned int id;
- unsigned long driver_data;
-};
-
-struct superhyway_device;
-extern struct bus_type superhyway_bus_type;
-
-struct superhyway_driver {
- char *name;
-
- const struct superhyway_device_id *id_table;
- struct device_driver drv;
-
- int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
- void (*remove)(struct superhyway_device *dev);
-};
-
-#define to_superhyway_driver(d) container_of((d), struct superhyway_driver, drv)
-
-struct superhyway_device {
- char name[32];
-
- struct device dev;
-
- struct superhyway_device_id id;
- struct superhyway_driver *drv;
- struct superhyway_bus *bus;
-
- int num_resources;
- struct resource *resource;
- struct superhyway_vcr_info vcr;
-};
-
-#define to_superhyway_device(d) container_of((d), struct superhyway_device, dev)
-
-#define superhyway_get_drvdata(d) dev_get_drvdata(&(d)->dev)
-#define superhyway_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p))
-
-static inline int
-superhyway_read_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info *vcr)
-{
- return dev->bus->ops->read_vcr(base, vcr);
-}
-
-static inline int
-superhyway_write_vcr(struct superhyway_device *dev, unsigned long base,
- struct superhyway_vcr_info vcr)
-{
- return dev->bus->ops->write_vcr(base, vcr);
-}
-
-extern int superhyway_scan_bus(struct superhyway_bus *);
-
-/* drivers/sh/superhyway/superhyway.c */
-int superhyway_register_driver(struct superhyway_driver *);
-void superhyway_unregister_driver(struct superhyway_driver *);
-int superhyway_add_device(unsigned long base, struct superhyway_device *, struct superhyway_bus *);
-int superhyway_add_devices(struct superhyway_bus *bus, struct superhyway_device **devices, int nr_devices);
-
-/* drivers/sh/superhyway/superhyway-sysfs.c */
-extern const struct attribute_group *superhyway_dev_groups[];
-
-#endif /* __LINUX_SUPERHYWAY_H */
-
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 15/22] spi: remove spi-sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 6 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh.c | 474 -------------------------------------------
3 files changed, 481 deletions(-)
delete mode 100644 drivers/spi/spi-sh.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2c5226adf5e1d3..7508dcef909c78 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,12 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH
- tristate "SuperH SPI controller"
- depends on SUPERH || COMPILE_TEST
- help
- SPI driver for SuperH SPI blocks.
-
config SPI_SH_SCI
tristate "SuperH SCI SPI controller"
depends on SUPERH
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index be9ba40ef8d03d..342a7eb5181c9b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -116,7 +116,6 @@ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
-obj-$(CONFIG_SPI_SH) += spi-sh.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
deleted file mode 100644
index 3e72fad99adfd4..00000000000000
--- a/drivers/spi/spi-sh.c
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH SPI bus driver
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- *
- * Based on pxa2xx_spi.c:
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-
-#define SPI_SH_TBR 0x00
-#define SPI_SH_RBR 0x00
-#define SPI_SH_CR1 0x08
-#define SPI_SH_CR2 0x10
-#define SPI_SH_CR3 0x18
-#define SPI_SH_CR4 0x20
-#define SPI_SH_CR5 0x28
-
-/* CR1 */
-#define SPI_SH_TBE 0x80
-#define SPI_SH_TBF 0x40
-#define SPI_SH_RBE 0x20
-#define SPI_SH_RBF 0x10
-#define SPI_SH_PFONRD 0x08
-#define SPI_SH_SSDB 0x04
-#define SPI_SH_SSD 0x02
-#define SPI_SH_SSA 0x01
-
-/* CR2 */
-#define SPI_SH_RSTF 0x80
-#define SPI_SH_LOOPBK 0x40
-#define SPI_SH_CPOL 0x20
-#define SPI_SH_CPHA 0x10
-#define SPI_SH_L1M0 0x08
-
-/* CR3 */
-#define SPI_SH_MAX_BYTE 0xFF
-
-/* CR4 */
-#define SPI_SH_TBEI 0x80
-#define SPI_SH_TBFI 0x40
-#define SPI_SH_RBEI 0x20
-#define SPI_SH_RBFI 0x10
-#define SPI_SH_WPABRT 0x04
-#define SPI_SH_SSS 0x01
-
-/* CR8 */
-#define SPI_SH_P1L0 0x80
-#define SPI_SH_PP1L0 0x40
-#define SPI_SH_MUXI 0x20
-#define SPI_SH_MUXIRQ 0x10
-
-#define SPI_SH_FIFO_SIZE 32
-#define SPI_SH_SEND_TIMEOUT (3 * HZ)
-#define SPI_SH_RECEIVE_TIMEOUT (HZ >> 3)
-
-#undef DEBUG
-
-struct spi_sh_data {
- void __iomem *addr;
- int irq;
- struct spi_master *master;
- unsigned long cr1;
- wait_queue_head_t wait;
- int width;
-};
-
-static void spi_sh_write(struct spi_sh_data *ss, unsigned long data,
- unsigned long offset)
-{
- if (ss->width == 8)
- iowrite8(data, ss->addr + (offset >> 2));
- else if (ss->width == 32)
- iowrite32(data, ss->addr + offset);
-}
-
-static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset)
-{
- if (ss->width == 8)
- return ioread8(ss->addr + (offset >> 2));
- else if (ss->width == 32)
- return ioread32(ss->addr + offset);
- else
- return 0;
-}
-
-static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp |= val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void spi_sh_clear_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp &= ~val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void clear_fifo(struct spi_sh_data *ss)
-{
- spi_sh_set_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
- spi_sh_clear_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
-}
-
-static int spi_sh_wait_receive_buffer(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_wait_write_buffer_empty(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (!(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBE)) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_send(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i, retval = 0;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len)
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- data = (unsigned char *)t->tx_buf;
- while (remain > 0) {
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len &&
- !(spi_sh_read(ss, SPI_SH_CR4) &
- SPI_SH_WPABRT) &&
- !(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBF);
- i++)
- spi_sh_write(ss, (unsigned long)data[i], SPI_SH_TBR);
-
- if (spi_sh_read(ss, SPI_SH_CR4) & SPI_SH_WPABRT) {
- /* Abort SPI operation */
- spi_sh_set_bit(ss, SPI_SH_WPABRT, SPI_SH_CR4);
- retval = -EIO;
- break;
- }
-
- cur_len = i;
-
- remain -= cur_len;
- data += cur_len;
-
- if (remain > 0) {
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && !(ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
- }
-
- if (list_is_last(&t->transfer_list, &mesg->transfers)) {
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && (ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- return retval;
-}
-
-static int spi_sh_receive(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len > SPI_SH_MAX_BYTE)
- spi_sh_write(ss, SPI_SH_MAX_BYTE, SPI_SH_CR3);
- else
- spi_sh_write(ss, t->len, SPI_SH_CR3);
-
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- spi_sh_wait_write_buffer_empty(ss);
-
- data = (unsigned char *)t->rx_buf;
- while (remain > 0) {
- if (remain >= SPI_SH_FIFO_SIZE) {
- ss->cr1 &= ~SPI_SH_RBF;
- spi_sh_set_bit(ss, SPI_SH_RBF, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_RBF,
- SPI_SH_RECEIVE_TIMEOUT);
- if (ret == 0 &&
- spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len; i++) {
- if (spi_sh_wait_receive_buffer(ss))
- break;
- data[i] = (unsigned char)spi_sh_read(ss, SPI_SH_RBR);
- }
-
- remain -= cur_len;
- data += cur_len;
- }
-
- /* deassert CS when SPI is receiving. */
- if (t->len > SPI_SH_MAX_BYTE) {
- clear_fifo(ss);
- spi_sh_write(ss, 1, SPI_SH_CR3);
- } else {
- spi_sh_write(ss, 0, SPI_SH_CR3);
- }
-
- return 0;
-}
-
-static int spi_sh_transfer_one_message(struct spi_controller *ctlr,
- struct spi_message *mesg)
-{
- struct spi_sh_data *ss = spi_controller_get_devdata(ctlr);
- struct spi_transfer *t;
- int ret;
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- list_for_each_entry(t, &mesg->transfers, transfer_list) {
- pr_debug("tx_buf = %p, rx_buf = %p\n",
- t->tx_buf, t->rx_buf);
- pr_debug("len = %d, delay.value = %d\n",
- t->len, t->delay.value);
-
- if (t->tx_buf) {
- ret = spi_sh_send(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- if (t->rx_buf) {
- ret = spi_sh_receive(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- mesg->actual_length += t->len;
- }
-
- mesg->status = 0;
- spi_finalize_current_message(ctlr);
-
- clear_fifo(ss);
- spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1);
- udelay(100);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-
- clear_fifo(ss);
-
- return 0;
-
- error:
- mesg->status = ret;
- spi_finalize_current_message(ctlr);
- if (mesg->complete)
- mesg->complete(mesg->context);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
- clear_fifo(ss);
-
- return ret;
-}
-
-static int spi_sh_setup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */
- spi_sh_write(ss, 0x00, SPI_SH_CR1); /* CR1 init */
- spi_sh_write(ss, 0x00, SPI_SH_CR3); /* CR3 init */
-
- clear_fifo(ss);
-
- /* 1/8 clock */
- spi_sh_write(ss, spi_sh_read(ss, SPI_SH_CR2) | 0x07, SPI_SH_CR2);
- udelay(10);
-
- return 0;
-}
-
-static void spi_sh_cleanup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-}
-
-static irqreturn_t spi_sh_irq(int irq, void *_ss)
-{
- struct spi_sh_data *ss = (struct spi_sh_data *)_ss;
- unsigned long cr1;
-
- cr1 = spi_sh_read(ss, SPI_SH_CR1);
- if (cr1 & SPI_SH_TBE)
- ss->cr1 |= SPI_SH_TBE;
- if (cr1 & SPI_SH_TBF)
- ss->cr1 |= SPI_SH_TBF;
- if (cr1 & SPI_SH_RBE)
- ss->cr1 |= SPI_SH_RBE;
- if (cr1 & SPI_SH_RBF)
- ss->cr1 |= SPI_SH_RBF;
-
- if (ss->cr1) {
- spi_sh_clear_bit(ss, ss->cr1, SPI_SH_CR4);
- wake_up(&ss->wait);
- }
-
- return IRQ_HANDLED;
-}
-
-static int spi_sh_remove(struct platform_device *pdev)
-{
- struct spi_sh_data *ss = platform_get_drvdata(pdev);
-
- spi_unregister_master(ss->master);
- free_irq(ss->irq, ss);
-
- return 0;
-}
-
-static int spi_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct spi_master *master;
- struct spi_sh_data *ss;
- int ret, irq;
-
- /* get base addr */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- master = devm_spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
- if (master == NULL) {
- dev_err(&pdev->dev, "spi_alloc_master error.\n");
- return -ENOMEM;
- }
-
- ss = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, ss);
-
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_8BIT:
- ss->width = 8;
- break;
- case IORESOURCE_MEM_32BIT:
- ss->width = 32;
- break;
- default:
- dev_err(&pdev->dev, "No support width\n");
- return -ENODEV;
- }
- ss->irq = irq;
- ss->master = master;
- ss->addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (ss->addr == NULL) {
- dev_err(&pdev->dev, "ioremap error.\n");
- return -ENOMEM;
- }
- init_waitqueue_head(&ss->wait);
-
- ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
- if (ret < 0) {
- dev_err(&pdev->dev, "request_irq error\n");
- return ret;
- }
-
- master->num_chipselect = 2;
- master->bus_num = pdev->id;
- master->setup = spi_sh_setup;
- master->transfer_one_message = spi_sh_transfer_one_message;
- master->cleanup = spi_sh_cleanup;
-
- ret = spi_register_master(master);
- if (ret < 0) {
- printk(KERN_ERR "spi_register_master error.\n");
- goto error3;
- }
-
- return 0;
-
- error3:
- free_irq(irq, ss);
- return ret;
-}
-
-static struct platform_driver spi_sh_driver = {
- .probe = spi_sh_probe,
- .remove = spi_sh_remove,
- .driver = {
- .name = "sh_spi",
- },
-};
-module_platform_driver(spi_sh_driver);
-
-MODULE_DESCRIPTION("SH SPI bus driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_ALIAS("platform:sh_spi");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 15/22] spi: remove spi-sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 6 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh.c | 474 -------------------------------------------
3 files changed, 481 deletions(-)
delete mode 100644 drivers/spi/spi-sh.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2c5226adf5e1d3..7508dcef909c78 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,12 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH
- tristate "SuperH SPI controller"
- depends on SUPERH || COMPILE_TEST
- help
- SPI driver for SuperH SPI blocks.
-
config SPI_SH_SCI
tristate "SuperH SCI SPI controller"
depends on SUPERH
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index be9ba40ef8d03d..342a7eb5181c9b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -116,7 +116,6 @@ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
-obj-$(CONFIG_SPI_SH) += spi-sh.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
deleted file mode 100644
index 3e72fad99adfd4..00000000000000
--- a/drivers/spi/spi-sh.c
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH SPI bus driver
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- *
- * Based on pxa2xx_spi.c:
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-
-#define SPI_SH_TBR 0x00
-#define SPI_SH_RBR 0x00
-#define SPI_SH_CR1 0x08
-#define SPI_SH_CR2 0x10
-#define SPI_SH_CR3 0x18
-#define SPI_SH_CR4 0x20
-#define SPI_SH_CR5 0x28
-
-/* CR1 */
-#define SPI_SH_TBE 0x80
-#define SPI_SH_TBF 0x40
-#define SPI_SH_RBE 0x20
-#define SPI_SH_RBF 0x10
-#define SPI_SH_PFONRD 0x08
-#define SPI_SH_SSDB 0x04
-#define SPI_SH_SSD 0x02
-#define SPI_SH_SSA 0x01
-
-/* CR2 */
-#define SPI_SH_RSTF 0x80
-#define SPI_SH_LOOPBK 0x40
-#define SPI_SH_CPOL 0x20
-#define SPI_SH_CPHA 0x10
-#define SPI_SH_L1M0 0x08
-
-/* CR3 */
-#define SPI_SH_MAX_BYTE 0xFF
-
-/* CR4 */
-#define SPI_SH_TBEI 0x80
-#define SPI_SH_TBFI 0x40
-#define SPI_SH_RBEI 0x20
-#define SPI_SH_RBFI 0x10
-#define SPI_SH_WPABRT 0x04
-#define SPI_SH_SSS 0x01
-
-/* CR8 */
-#define SPI_SH_P1L0 0x80
-#define SPI_SH_PP1L0 0x40
-#define SPI_SH_MUXI 0x20
-#define SPI_SH_MUXIRQ 0x10
-
-#define SPI_SH_FIFO_SIZE 32
-#define SPI_SH_SEND_TIMEOUT (3 * HZ)
-#define SPI_SH_RECEIVE_TIMEOUT (HZ >> 3)
-
-#undef DEBUG
-
-struct spi_sh_data {
- void __iomem *addr;
- int irq;
- struct spi_master *master;
- unsigned long cr1;
- wait_queue_head_t wait;
- int width;
-};
-
-static void spi_sh_write(struct spi_sh_data *ss, unsigned long data,
- unsigned long offset)
-{
- if (ss->width == 8)
- iowrite8(data, ss->addr + (offset >> 2));
- else if (ss->width == 32)
- iowrite32(data, ss->addr + offset);
-}
-
-static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset)
-{
- if (ss->width == 8)
- return ioread8(ss->addr + (offset >> 2));
- else if (ss->width == 32)
- return ioread32(ss->addr + offset);
- else
- return 0;
-}
-
-static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp |= val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void spi_sh_clear_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp &= ~val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void clear_fifo(struct spi_sh_data *ss)
-{
- spi_sh_set_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
- spi_sh_clear_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
-}
-
-static int spi_sh_wait_receive_buffer(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_wait_write_buffer_empty(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (!(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBE)) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_send(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i, retval = 0;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len)
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- data = (unsigned char *)t->tx_buf;
- while (remain > 0) {
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len &&
- !(spi_sh_read(ss, SPI_SH_CR4) &
- SPI_SH_WPABRT) &&
- !(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBF);
- i++)
- spi_sh_write(ss, (unsigned long)data[i], SPI_SH_TBR);
-
- if (spi_sh_read(ss, SPI_SH_CR4) & SPI_SH_WPABRT) {
- /* Abort SPI operation */
- spi_sh_set_bit(ss, SPI_SH_WPABRT, SPI_SH_CR4);
- retval = -EIO;
- break;
- }
-
- cur_len = i;
-
- remain -= cur_len;
- data += cur_len;
-
- if (remain > 0) {
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && !(ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
- }
-
- if (list_is_last(&t->transfer_list, &mesg->transfers)) {
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && (ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- return retval;
-}
-
-static int spi_sh_receive(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len > SPI_SH_MAX_BYTE)
- spi_sh_write(ss, SPI_SH_MAX_BYTE, SPI_SH_CR3);
- else
- spi_sh_write(ss, t->len, SPI_SH_CR3);
-
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- spi_sh_wait_write_buffer_empty(ss);
-
- data = (unsigned char *)t->rx_buf;
- while (remain > 0) {
- if (remain >= SPI_SH_FIFO_SIZE) {
- ss->cr1 &= ~SPI_SH_RBF;
- spi_sh_set_bit(ss, SPI_SH_RBF, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_RBF,
- SPI_SH_RECEIVE_TIMEOUT);
- if (ret == 0 &&
- spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len; i++) {
- if (spi_sh_wait_receive_buffer(ss))
- break;
- data[i] = (unsigned char)spi_sh_read(ss, SPI_SH_RBR);
- }
-
- remain -= cur_len;
- data += cur_len;
- }
-
- /* deassert CS when SPI is receiving. */
- if (t->len > SPI_SH_MAX_BYTE) {
- clear_fifo(ss);
- spi_sh_write(ss, 1, SPI_SH_CR3);
- } else {
- spi_sh_write(ss, 0, SPI_SH_CR3);
- }
-
- return 0;
-}
-
-static int spi_sh_transfer_one_message(struct spi_controller *ctlr,
- struct spi_message *mesg)
-{
- struct spi_sh_data *ss = spi_controller_get_devdata(ctlr);
- struct spi_transfer *t;
- int ret;
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- list_for_each_entry(t, &mesg->transfers, transfer_list) {
- pr_debug("tx_buf = %p, rx_buf = %p\n",
- t->tx_buf, t->rx_buf);
- pr_debug("len = %d, delay.value = %d\n",
- t->len, t->delay.value);
-
- if (t->tx_buf) {
- ret = spi_sh_send(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- if (t->rx_buf) {
- ret = spi_sh_receive(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- mesg->actual_length += t->len;
- }
-
- mesg->status = 0;
- spi_finalize_current_message(ctlr);
-
- clear_fifo(ss);
- spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1);
- udelay(100);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-
- clear_fifo(ss);
-
- return 0;
-
- error:
- mesg->status = ret;
- spi_finalize_current_message(ctlr);
- if (mesg->complete)
- mesg->complete(mesg->context);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
- clear_fifo(ss);
-
- return ret;
-}
-
-static int spi_sh_setup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */
- spi_sh_write(ss, 0x00, SPI_SH_CR1); /* CR1 init */
- spi_sh_write(ss, 0x00, SPI_SH_CR3); /* CR3 init */
-
- clear_fifo(ss);
-
- /* 1/8 clock */
- spi_sh_write(ss, spi_sh_read(ss, SPI_SH_CR2) | 0x07, SPI_SH_CR2);
- udelay(10);
-
- return 0;
-}
-
-static void spi_sh_cleanup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-}
-
-static irqreturn_t spi_sh_irq(int irq, void *_ss)
-{
- struct spi_sh_data *ss = (struct spi_sh_data *)_ss;
- unsigned long cr1;
-
- cr1 = spi_sh_read(ss, SPI_SH_CR1);
- if (cr1 & SPI_SH_TBE)
- ss->cr1 |= SPI_SH_TBE;
- if (cr1 & SPI_SH_TBF)
- ss->cr1 |= SPI_SH_TBF;
- if (cr1 & SPI_SH_RBE)
- ss->cr1 |= SPI_SH_RBE;
- if (cr1 & SPI_SH_RBF)
- ss->cr1 |= SPI_SH_RBF;
-
- if (ss->cr1) {
- spi_sh_clear_bit(ss, ss->cr1, SPI_SH_CR4);
- wake_up(&ss->wait);
- }
-
- return IRQ_HANDLED;
-}
-
-static int spi_sh_remove(struct platform_device *pdev)
-{
- struct spi_sh_data *ss = platform_get_drvdata(pdev);
-
- spi_unregister_master(ss->master);
- free_irq(ss->irq, ss);
-
- return 0;
-}
-
-static int spi_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct spi_master *master;
- struct spi_sh_data *ss;
- int ret, irq;
-
- /* get base addr */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- master = devm_spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
- if (master == NULL) {
- dev_err(&pdev->dev, "spi_alloc_master error.\n");
- return -ENOMEM;
- }
-
- ss = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, ss);
-
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_8BIT:
- ss->width = 8;
- break;
- case IORESOURCE_MEM_32BIT:
- ss->width = 32;
- break;
- default:
- dev_err(&pdev->dev, "No support width\n");
- return -ENODEV;
- }
- ss->irq = irq;
- ss->master = master;
- ss->addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (ss->addr == NULL) {
- dev_err(&pdev->dev, "ioremap error.\n");
- return -ENOMEM;
- }
- init_waitqueue_head(&ss->wait);
-
- ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
- if (ret < 0) {
- dev_err(&pdev->dev, "request_irq error\n");
- return ret;
- }
-
- master->num_chipselect = 2;
- master->bus_num = pdev->id;
- master->setup = spi_sh_setup;
- master->transfer_one_message = spi_sh_transfer_one_message;
- master->cleanup = spi_sh_cleanup;
-
- ret = spi_register_master(master);
- if (ret < 0) {
- printk(KERN_ERR "spi_register_master error.\n");
- goto error3;
- }
-
- return 0;
-
- error3:
- free_irq(irq, ss);
- return ret;
-}
-
-static struct platform_driver spi_sh_driver = {
- .probe = spi_sh_probe,
- .remove = spi_sh_remove,
- .driver = {
- .name = "sh_spi",
- },
-};
-module_platform_driver(spi_sh_driver);
-
-MODULE_DESCRIPTION("SH SPI bus driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_ALIAS("platform:sh_spi");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 15/22] spi: remove spi-sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 6 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh.c | 474 -------------------------------------------
3 files changed, 481 deletions(-)
delete mode 100644 drivers/spi/spi-sh.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2c5226adf5e1d3..7508dcef909c78 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,12 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH
- tristate "SuperH SPI controller"
- depends on SUPERH || COMPILE_TEST
- help
- SPI driver for SuperH SPI blocks.
-
config SPI_SH_SCI
tristate "SuperH SCI SPI controller"
depends on SUPERH
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index be9ba40ef8d03d..342a7eb5181c9b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -116,7 +116,6 @@ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
-obj-$(CONFIG_SPI_SH) += spi-sh.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
deleted file mode 100644
index 3e72fad99adfd4..00000000000000
--- a/drivers/spi/spi-sh.c
+++ /dev/null
@@ -1,474 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH SPI bus driver
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- *
- * Based on pxa2xx_spi.c:
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-
-#define SPI_SH_TBR 0x00
-#define SPI_SH_RBR 0x00
-#define SPI_SH_CR1 0x08
-#define SPI_SH_CR2 0x10
-#define SPI_SH_CR3 0x18
-#define SPI_SH_CR4 0x20
-#define SPI_SH_CR5 0x28
-
-/* CR1 */
-#define SPI_SH_TBE 0x80
-#define SPI_SH_TBF 0x40
-#define SPI_SH_RBE 0x20
-#define SPI_SH_RBF 0x10
-#define SPI_SH_PFONRD 0x08
-#define SPI_SH_SSDB 0x04
-#define SPI_SH_SSD 0x02
-#define SPI_SH_SSA 0x01
-
-/* CR2 */
-#define SPI_SH_RSTF 0x80
-#define SPI_SH_LOOPBK 0x40
-#define SPI_SH_CPOL 0x20
-#define SPI_SH_CPHA 0x10
-#define SPI_SH_L1M0 0x08
-
-/* CR3 */
-#define SPI_SH_MAX_BYTE 0xFF
-
-/* CR4 */
-#define SPI_SH_TBEI 0x80
-#define SPI_SH_TBFI 0x40
-#define SPI_SH_RBEI 0x20
-#define SPI_SH_RBFI 0x10
-#define SPI_SH_WPABRT 0x04
-#define SPI_SH_SSS 0x01
-
-/* CR8 */
-#define SPI_SH_P1L0 0x80
-#define SPI_SH_PP1L0 0x40
-#define SPI_SH_MUXI 0x20
-#define SPI_SH_MUXIRQ 0x10
-
-#define SPI_SH_FIFO_SIZE 32
-#define SPI_SH_SEND_TIMEOUT (3 * HZ)
-#define SPI_SH_RECEIVE_TIMEOUT (HZ >> 3)
-
-#undef DEBUG
-
-struct spi_sh_data {
- void __iomem *addr;
- int irq;
- struct spi_master *master;
- unsigned long cr1;
- wait_queue_head_t wait;
- int width;
-};
-
-static void spi_sh_write(struct spi_sh_data *ss, unsigned long data,
- unsigned long offset)
-{
- if (ss->width == 8)
- iowrite8(data, ss->addr + (offset >> 2));
- else if (ss->width == 32)
- iowrite32(data, ss->addr + offset);
-}
-
-static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset)
-{
- if (ss->width == 8)
- return ioread8(ss->addr + (offset >> 2));
- else if (ss->width == 32)
- return ioread32(ss->addr + offset);
- else
- return 0;
-}
-
-static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp |= val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void spi_sh_clear_bit(struct spi_sh_data *ss, unsigned long val,
- unsigned long offset)
-{
- unsigned long tmp;
-
- tmp = spi_sh_read(ss, offset);
- tmp &= ~val;
- spi_sh_write(ss, tmp, offset);
-}
-
-static void clear_fifo(struct spi_sh_data *ss)
-{
- spi_sh_set_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
- spi_sh_clear_bit(ss, SPI_SH_RSTF, SPI_SH_CR2);
-}
-
-static int spi_sh_wait_receive_buffer(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_wait_write_buffer_empty(struct spi_sh_data *ss)
-{
- int timeout = 100000;
-
- while (!(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBE)) {
- udelay(10);
- if (timeout-- < 0)
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int spi_sh_send(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i, retval = 0;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len)
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- data = (unsigned char *)t->tx_buf;
- while (remain > 0) {
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len &&
- !(spi_sh_read(ss, SPI_SH_CR4) &
- SPI_SH_WPABRT) &&
- !(spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_TBF);
- i++)
- spi_sh_write(ss, (unsigned long)data[i], SPI_SH_TBR);
-
- if (spi_sh_read(ss, SPI_SH_CR4) & SPI_SH_WPABRT) {
- /* Abort SPI operation */
- spi_sh_set_bit(ss, SPI_SH_WPABRT, SPI_SH_CR4);
- retval = -EIO;
- break;
- }
-
- cur_len = i;
-
- remain -= cur_len;
- data += cur_len;
-
- if (remain > 0) {
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && !(ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
- }
-
- if (list_is_last(&t->transfer_list, &mesg->transfers)) {
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- ss->cr1 &= ~SPI_SH_TBE;
- spi_sh_set_bit(ss, SPI_SH_TBE, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_TBE,
- SPI_SH_SEND_TIMEOUT);
- if (ret == 0 && (ss->cr1 & SPI_SH_TBE)) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- return retval;
-}
-
-static int spi_sh_receive(struct spi_sh_data *ss, struct spi_message *mesg,
- struct spi_transfer *t)
-{
- int i;
- int remain = t->len;
- int cur_len;
- unsigned char *data;
- long ret;
-
- if (t->len > SPI_SH_MAX_BYTE)
- spi_sh_write(ss, SPI_SH_MAX_BYTE, SPI_SH_CR3);
- else
- spi_sh_write(ss, t->len, SPI_SH_CR3);
-
- spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
- spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- spi_sh_wait_write_buffer_empty(ss);
-
- data = (unsigned char *)t->rx_buf;
- while (remain > 0) {
- if (remain >= SPI_SH_FIFO_SIZE) {
- ss->cr1 &= ~SPI_SH_RBF;
- spi_sh_set_bit(ss, SPI_SH_RBF, SPI_SH_CR4);
- ret = wait_event_interruptible_timeout(ss->wait,
- ss->cr1 & SPI_SH_RBF,
- SPI_SH_RECEIVE_TIMEOUT);
- if (ret == 0 &&
- spi_sh_read(ss, SPI_SH_CR1) & SPI_SH_RBE) {
- printk(KERN_ERR "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- }
-
- cur_len = min(SPI_SH_FIFO_SIZE, remain);
- for (i = 0; i < cur_len; i++) {
- if (spi_sh_wait_receive_buffer(ss))
- break;
- data[i] = (unsigned char)spi_sh_read(ss, SPI_SH_RBR);
- }
-
- remain -= cur_len;
- data += cur_len;
- }
-
- /* deassert CS when SPI is receiving. */
- if (t->len > SPI_SH_MAX_BYTE) {
- clear_fifo(ss);
- spi_sh_write(ss, 1, SPI_SH_CR3);
- } else {
- spi_sh_write(ss, 0, SPI_SH_CR3);
- }
-
- return 0;
-}
-
-static int spi_sh_transfer_one_message(struct spi_controller *ctlr,
- struct spi_message *mesg)
-{
- struct spi_sh_data *ss = spi_controller_get_devdata(ctlr);
- struct spi_transfer *t;
- int ret;
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
-
- list_for_each_entry(t, &mesg->transfers, transfer_list) {
- pr_debug("tx_buf = %p, rx_buf = %p\n",
- t->tx_buf, t->rx_buf);
- pr_debug("len = %d, delay.value = %d\n",
- t->len, t->delay.value);
-
- if (t->tx_buf) {
- ret = spi_sh_send(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- if (t->rx_buf) {
- ret = spi_sh_receive(ss, mesg, t);
- if (ret < 0)
- goto error;
- }
- mesg->actual_length += t->len;
- }
-
- mesg->status = 0;
- spi_finalize_current_message(ctlr);
-
- clear_fifo(ss);
- spi_sh_set_bit(ss, SPI_SH_SSD, SPI_SH_CR1);
- udelay(100);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-
- clear_fifo(ss);
-
- return 0;
-
- error:
- mesg->status = ret;
- spi_finalize_current_message(ctlr);
- if (mesg->complete)
- mesg->complete(mesg->context);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
- clear_fifo(ss);
-
- return ret;
-}
-
-static int spi_sh_setup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_write(ss, 0xfe, SPI_SH_CR1); /* SPI sycle stop */
- spi_sh_write(ss, 0x00, SPI_SH_CR1); /* CR1 init */
- spi_sh_write(ss, 0x00, SPI_SH_CR3); /* CR3 init */
-
- clear_fifo(ss);
-
- /* 1/8 clock */
- spi_sh_write(ss, spi_sh_read(ss, SPI_SH_CR2) | 0x07, SPI_SH_CR2);
- udelay(10);
-
- return 0;
-}
-
-static void spi_sh_cleanup(struct spi_device *spi)
-{
- struct spi_sh_data *ss = spi_master_get_devdata(spi->master);
-
- pr_debug("%s: enter\n", __func__);
-
- spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
- SPI_SH_CR1);
-}
-
-static irqreturn_t spi_sh_irq(int irq, void *_ss)
-{
- struct spi_sh_data *ss = (struct spi_sh_data *)_ss;
- unsigned long cr1;
-
- cr1 = spi_sh_read(ss, SPI_SH_CR1);
- if (cr1 & SPI_SH_TBE)
- ss->cr1 |= SPI_SH_TBE;
- if (cr1 & SPI_SH_TBF)
- ss->cr1 |= SPI_SH_TBF;
- if (cr1 & SPI_SH_RBE)
- ss->cr1 |= SPI_SH_RBE;
- if (cr1 & SPI_SH_RBF)
- ss->cr1 |= SPI_SH_RBF;
-
- if (ss->cr1) {
- spi_sh_clear_bit(ss, ss->cr1, SPI_SH_CR4);
- wake_up(&ss->wait);
- }
-
- return IRQ_HANDLED;
-}
-
-static int spi_sh_remove(struct platform_device *pdev)
-{
- struct spi_sh_data *ss = platform_get_drvdata(pdev);
-
- spi_unregister_master(ss->master);
- free_irq(ss->irq, ss);
-
- return 0;
-}
-
-static int spi_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct spi_master *master;
- struct spi_sh_data *ss;
- int ret, irq;
-
- /* get base addr */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- master = devm_spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
- if (master == NULL) {
- dev_err(&pdev->dev, "spi_alloc_master error.\n");
- return -ENOMEM;
- }
-
- ss = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, ss);
-
- switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_8BIT:
- ss->width = 8;
- break;
- case IORESOURCE_MEM_32BIT:
- ss->width = 32;
- break;
- default:
- dev_err(&pdev->dev, "No support width\n");
- return -ENODEV;
- }
- ss->irq = irq;
- ss->master = master;
- ss->addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (ss->addr == NULL) {
- dev_err(&pdev->dev, "ioremap error.\n");
- return -ENOMEM;
- }
- init_waitqueue_head(&ss->wait);
-
- ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
- if (ret < 0) {
- dev_err(&pdev->dev, "request_irq error\n");
- return ret;
- }
-
- master->num_chipselect = 2;
- master->bus_num = pdev->id;
- master->setup = spi_sh_setup;
- master->transfer_one_message = spi_sh_transfer_one_message;
- master->cleanup = spi_sh_cleanup;
-
- ret = spi_register_master(master);
- if (ret < 0) {
- printk(KERN_ERR "spi_register_master error.\n");
- goto error3;
- }
-
- return 0;
-
- error3:
- free_irq(irq, ss);
- return ret;
-}
-
-static struct platform_driver spi_sh_driver = {
- .probe = spi_sh_probe,
- .remove = spi_sh_remove,
- .driver = {
- .name = "sh_spi",
- },
-};
-module_platform_driver(spi_sh_driver);
-
-MODULE_DESCRIPTION("SH SPI bus driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yoshihiro Shimoda");
-MODULE_ALIAS("platform:sh_spi");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 16/22] spi: remove spi-sh-sci
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
3 files changed, 205 deletions(-)
delete mode 100644 drivers/spi/spi-sh-sci.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7508dcef909c78..76f3bc6f8c81fc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,13 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH_SCI
- tristate "SuperH SCI SPI controller"
- depends on SUPERH
- select SPI_BITBANG
- help
- SPI driver for SuperH SCI blocks.
-
config SPI_SH_HSPI
tristate "SuperH HSPI controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 342a7eb5181c9b..27d877440c6539 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
-obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o
obj-$(CONFIG_SPI_SN_F_OSPI) += spi-sn-f-ospi.o
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
deleted file mode 100644
index 8f30531e141867..00000000000000
--- a/drivers/spi/spi-sh-sci.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SH SCI SPI interface
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * Based on S3C24XX GPIO based SPI driver, which is:
- * Copyright (c) 2006 Ben Dooks
- * Copyright (c) 2006 Simtec Electronics
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/module.h>
-
-#include <asm/spi.h>
-#include <asm/io.h>
-
-struct sh_sci_spi {
- struct spi_bitbang bitbang;
-
- void __iomem *membase;
- unsigned char val;
- struct sh_spi_info *info;
- struct platform_device *dev;
-};
-
-#define SCSPTR(sp) (sp->membase + 0x1c)
-#define PIN_SCK (1 << 2)
-#define PIN_TXD (1 << 0)
-#define PIN_RXD PIN_TXD
-#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD)
-
-static inline void setbits(struct sh_sci_spi *sp, int bits, int on)
-{
- /*
- * We are the only user of SCSPTR so no locking is required.
- * Reading bit 2 and 0 in SCSPTR gives pin state as input.
- * Writing the same bits sets the output value.
- * This makes regular read-modify-write difficult so we
- * use sp->val to keep track of the latest register value.
- */
-
- if (on)
- sp->val |= bits;
- else
- sp->val &= ~bits;
-
- iowrite8(sp->val, SCSPTR(sp));
-}
-
-static inline void setsck(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_SCK, on);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_TXD, on);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#include "spi-bitbang-txrx.h"
-
-static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
-}
-
-static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- if (sp->info->chip_select)
- (sp->info->chip_select)(sp->info, dev->chip_select, value);
-}
-
-static int sh_sci_spi_probe(struct platform_device *dev)
-{
- struct resource *r;
- struct spi_master *master;
- struct sh_sci_spi *sp;
- int ret;
-
- master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi));
- if (master == NULL) {
- dev_err(&dev->dev, "failed to allocate spi master\n");
- ret = -ENOMEM;
- goto err0;
- }
-
- sp = spi_master_get_devdata(master);
-
- platform_set_drvdata(dev, sp);
- sp->info = dev_get_platdata(&dev->dev);
- if (!sp->info) {
- dev_err(&dev->dev, "platform data is missing\n");
- ret = -ENOENT;
- goto err1;
- }
-
- /* setup spi bitbang adaptor */
- sp->bitbang.master = master;
- sp->bitbang.master->bus_num = sp->info->bus_num;
- sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
- sp->bitbang.chipselect = sh_sci_spi_chipselect;
-
- sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
- sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1;
- sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2;
- sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3;
-
- r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- ret = -ENOENT;
- goto err1;
- }
- sp->membase = ioremap(r->start, resource_size(r));
- if (!sp->membase) {
- ret = -ENXIO;
- goto err1;
- }
- sp->val = ioread8(SCSPTR(sp));
- setbits(sp, PIN_INIT, 1);
-
- ret = spi_bitbang_start(&sp->bitbang);
- if (!ret)
- return 0;
-
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- err1:
- spi_master_put(sp->bitbang.master);
- err0:
- return ret;
-}
-
-static int sh_sci_spi_remove(struct platform_device *dev)
-{
- struct sh_sci_spi *sp = platform_get_drvdata(dev);
-
- spi_bitbang_stop(&sp->bitbang);
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- spi_master_put(sp->bitbang.master);
- return 0;
-}
-
-static struct platform_driver sh_sci_spi_drv = {
- .probe = sh_sci_spi_probe,
- .remove = sh_sci_spi_remove,
- .driver = {
- .name = "spi_sh_sci",
- },
-};
-module_platform_driver(sh_sci_spi_drv);
-
-MODULE_DESCRIPTION("SH SCI SPI Driver");
-MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:spi_sh_sci");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 16/22] spi: remove spi-sh-sci
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
3 files changed, 205 deletions(-)
delete mode 100644 drivers/spi/spi-sh-sci.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7508dcef909c78..76f3bc6f8c81fc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,13 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH_SCI
- tristate "SuperH SCI SPI controller"
- depends on SUPERH
- select SPI_BITBANG
- help
- SPI driver for SuperH SCI blocks.
-
config SPI_SH_HSPI
tristate "SuperH HSPI controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 342a7eb5181c9b..27d877440c6539 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
-obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o
obj-$(CONFIG_SPI_SN_F_OSPI) += spi-sn-f-ospi.o
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
deleted file mode 100644
index 8f30531e141867..00000000000000
--- a/drivers/spi/spi-sh-sci.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SH SCI SPI interface
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * Based on S3C24XX GPIO based SPI driver, which is:
- * Copyright (c) 2006 Ben Dooks
- * Copyright (c) 2006 Simtec Electronics
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/module.h>
-
-#include <asm/spi.h>
-#include <asm/io.h>
-
-struct sh_sci_spi {
- struct spi_bitbang bitbang;
-
- void __iomem *membase;
- unsigned char val;
- struct sh_spi_info *info;
- struct platform_device *dev;
-};
-
-#define SCSPTR(sp) (sp->membase + 0x1c)
-#define PIN_SCK (1 << 2)
-#define PIN_TXD (1 << 0)
-#define PIN_RXD PIN_TXD
-#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD)
-
-static inline void setbits(struct sh_sci_spi *sp, int bits, int on)
-{
- /*
- * We are the only user of SCSPTR so no locking is required.
- * Reading bit 2 and 0 in SCSPTR gives pin state as input.
- * Writing the same bits sets the output value.
- * This makes regular read-modify-write difficult so we
- * use sp->val to keep track of the latest register value.
- */
-
- if (on)
- sp->val |= bits;
- else
- sp->val &= ~bits;
-
- iowrite8(sp->val, SCSPTR(sp));
-}
-
-static inline void setsck(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_SCK, on);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_TXD, on);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#include "spi-bitbang-txrx.h"
-
-static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
-}
-
-static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- if (sp->info->chip_select)
- (sp->info->chip_select)(sp->info, dev->chip_select, value);
-}
-
-static int sh_sci_spi_probe(struct platform_device *dev)
-{
- struct resource *r;
- struct spi_master *master;
- struct sh_sci_spi *sp;
- int ret;
-
- master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi));
- if (master == NULL) {
- dev_err(&dev->dev, "failed to allocate spi master\n");
- ret = -ENOMEM;
- goto err0;
- }
-
- sp = spi_master_get_devdata(master);
-
- platform_set_drvdata(dev, sp);
- sp->info = dev_get_platdata(&dev->dev);
- if (!sp->info) {
- dev_err(&dev->dev, "platform data is missing\n");
- ret = -ENOENT;
- goto err1;
- }
-
- /* setup spi bitbang adaptor */
- sp->bitbang.master = master;
- sp->bitbang.master->bus_num = sp->info->bus_num;
- sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
- sp->bitbang.chipselect = sh_sci_spi_chipselect;
-
- sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
- sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1;
- sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2;
- sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3;
-
- r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- ret = -ENOENT;
- goto err1;
- }
- sp->membase = ioremap(r->start, resource_size(r));
- if (!sp->membase) {
- ret = -ENXIO;
- goto err1;
- }
- sp->val = ioread8(SCSPTR(sp));
- setbits(sp, PIN_INIT, 1);
-
- ret = spi_bitbang_start(&sp->bitbang);
- if (!ret)
- return 0;
-
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- err1:
- spi_master_put(sp->bitbang.master);
- err0:
- return ret;
-}
-
-static int sh_sci_spi_remove(struct platform_device *dev)
-{
- struct sh_sci_spi *sp = platform_get_drvdata(dev);
-
- spi_bitbang_stop(&sp->bitbang);
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- spi_master_put(sp->bitbang.master);
- return 0;
-}
-
-static struct platform_driver sh_sci_spi_drv = {
- .probe = sh_sci_spi_probe,
- .remove = sh_sci_spi_remove,
- .driver = {
- .name = "spi_sh_sci",
- },
-};
-module_platform_driver(sh_sci_spi_drv);
-
-MODULE_DESCRIPTION("SH SCI SPI Driver");
-MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:spi_sh_sci");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 16/22] spi: remove spi-sh-sci
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
3 files changed, 205 deletions(-)
delete mode 100644 drivers/spi/spi-sh-sci.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7508dcef909c78..76f3bc6f8c81fc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -882,13 +882,6 @@ config SPI_SH_MSIOF
help
SPI driver for SuperH and SH Mobile MSIOF blocks.
-config SPI_SH_SCI
- tristate "SuperH SCI SPI controller"
- depends on SUPERH
- select SPI_BITBANG
- help
- SPI driver for SuperH SCI blocks.
-
config SPI_SH_HSPI
tristate "SuperH HSPI controller"
depends on ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 342a7eb5181c9b..27d877440c6539 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
-obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o
obj-$(CONFIG_SPI_SN_F_OSPI) += spi-sn-f-ospi.o
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
deleted file mode 100644
index 8f30531e141867..00000000000000
--- a/drivers/spi/spi-sh-sci.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SH SCI SPI interface
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * Based on S3C24XX GPIO based SPI driver, which is:
- * Copyright (c) 2006 Ben Dooks
- * Copyright (c) 2006 Simtec Electronics
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/module.h>
-
-#include <asm/spi.h>
-#include <asm/io.h>
-
-struct sh_sci_spi {
- struct spi_bitbang bitbang;
-
- void __iomem *membase;
- unsigned char val;
- struct sh_spi_info *info;
- struct platform_device *dev;
-};
-
-#define SCSPTR(sp) (sp->membase + 0x1c)
-#define PIN_SCK (1 << 2)
-#define PIN_TXD (1 << 0)
-#define PIN_RXD PIN_TXD
-#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD)
-
-static inline void setbits(struct sh_sci_spi *sp, int bits, int on)
-{
- /*
- * We are the only user of SCSPTR so no locking is required.
- * Reading bit 2 and 0 in SCSPTR gives pin state as input.
- * Writing the same bits sets the output value.
- * This makes regular read-modify-write difficult so we
- * use sp->val to keep track of the latest register value.
- */
-
- if (on)
- sp->val |= bits;
- else
- sp->val &= ~bits;
-
- iowrite8(sp->val, SCSPTR(sp));
-}
-
-static inline void setsck(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_SCK, on);
-}
-
-static inline void setmosi(struct spi_device *dev, int on)
-{
- setbits(spi_master_get_devdata(dev->master), PIN_TXD, on);
-}
-
-static inline u32 getmiso(struct spi_device *dev)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0;
-}
-
-#define spidelay(x) ndelay(x)
-
-#include "spi-bitbang-txrx.h"
-
-static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
-}
-
-static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
- unsigned nsecs, u32 word, u8 bits,
- unsigned flags)
-{
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
-}
-
-static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
-{
- struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
-
- if (sp->info->chip_select)
- (sp->info->chip_select)(sp->info, dev->chip_select, value);
-}
-
-static int sh_sci_spi_probe(struct platform_device *dev)
-{
- struct resource *r;
- struct spi_master *master;
- struct sh_sci_spi *sp;
- int ret;
-
- master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi));
- if (master == NULL) {
- dev_err(&dev->dev, "failed to allocate spi master\n");
- ret = -ENOMEM;
- goto err0;
- }
-
- sp = spi_master_get_devdata(master);
-
- platform_set_drvdata(dev, sp);
- sp->info = dev_get_platdata(&dev->dev);
- if (!sp->info) {
- dev_err(&dev->dev, "platform data is missing\n");
- ret = -ENOENT;
- goto err1;
- }
-
- /* setup spi bitbang adaptor */
- sp->bitbang.master = master;
- sp->bitbang.master->bus_num = sp->info->bus_num;
- sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
- sp->bitbang.chipselect = sh_sci_spi_chipselect;
-
- sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
- sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1;
- sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2;
- sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3;
-
- r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- ret = -ENOENT;
- goto err1;
- }
- sp->membase = ioremap(r->start, resource_size(r));
- if (!sp->membase) {
- ret = -ENXIO;
- goto err1;
- }
- sp->val = ioread8(SCSPTR(sp));
- setbits(sp, PIN_INIT, 1);
-
- ret = spi_bitbang_start(&sp->bitbang);
- if (!ret)
- return 0;
-
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- err1:
- spi_master_put(sp->bitbang.master);
- err0:
- return ret;
-}
-
-static int sh_sci_spi_remove(struct platform_device *dev)
-{
- struct sh_sci_spi *sp = platform_get_drvdata(dev);
-
- spi_bitbang_stop(&sp->bitbang);
- setbits(sp, PIN_INIT, 0);
- iounmap(sp->membase);
- spi_master_put(sp->bitbang.master);
- return 0;
-}
-
-static struct platform_driver sh_sci_spi_drv = {
- .probe = sh_sci_spi_probe,
- .remove = sh_sci_spi_remove,
- .driver = {
- .name = "spi_sh_sci",
- },
-};
-module_platform_driver(sh_sci_spi_drv);
-
-MODULE_DESCRIPTION("SH SCI SPI Driver");
-MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:spi_sh_sci");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 16/22] spi: remove spi-sh-sci
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:50 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:50 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/spi/Kconfig | 7 --
> drivers/spi/Makefile | 1 -
> drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
> 3 files changed, 205 deletions(-)
> delete mode 100644 drivers/spi/spi-sh-sci.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 7508dcef909c78..76f3bc6f8c81fc 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -882,13 +882,6 @@ config SPI_SH_MSIOF
> help
> SPI driver for SuperH and SH Mobile MSIOF blocks.
>
> -config SPI_SH_SCI
> - tristate "SuperH SCI SPI controller"
> - depends on SUPERH
> - select SPI_BITBANG
> - help
> - SPI driver for SuperH SCI blocks.
This driver uses the Serial Communications Interface (SCI, cfr.
drivers/tty/serial/sh-sci.c) in SPI mode. Hence in theory it could be
used on a variety of Renesas ARM SoCs, and even on RZ/Five.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 16/22] spi: remove spi-sh-sci
@ 2023-01-13 8:50 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:50 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/spi/Kconfig | 7 --
> drivers/spi/Makefile | 1 -
> drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
> 3 files changed, 205 deletions(-)
> delete mode 100644 drivers/spi/spi-sh-sci.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 7508dcef909c78..76f3bc6f8c81fc 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -882,13 +882,6 @@ config SPI_SH_MSIOF
> help
> SPI driver for SuperH and SH Mobile MSIOF blocks.
>
> -config SPI_SH_SCI
> - tristate "SuperH SCI SPI controller"
> - depends on SUPERH
> - select SPI_BITBANG
> - help
> - SPI driver for SuperH SCI blocks.
This driver uses the Serial Communications Interface (SCI, cfr.
drivers/tty/serial/sh-sci.c) in SPI mode. Hence in theory it could be
used on a variety of Renesas ARM SoCs, and even on RZ/Five.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 16/22] spi: remove spi-sh-sci
@ 2023-01-13 8:50 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:50 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/spi/Kconfig | 7 --
> drivers/spi/Makefile | 1 -
> drivers/spi/spi-sh-sci.c | 197 ---------------------------------------
> 3 files changed, 205 deletions(-)
> delete mode 100644 drivers/spi/spi-sh-sci.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 7508dcef909c78..76f3bc6f8c81fc 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -882,13 +882,6 @@ config SPI_SH_MSIOF
> help
> SPI driver for SuperH and SH Mobile MSIOF blocks.
>
> -config SPI_SH_SCI
> - tristate "SuperH SCI SPI controller"
> - depends on SUPERH
> - select SPI_BITBANG
> - help
> - SPI driver for SuperH SCI blocks.
This driver uses the Serial Communications Interface (SCI, cfr.
drivers/tty/serial/sh-sci.c) in SPI mode. Hence in theory it could be
used on a variety of Renesas ARM SoCs, and even on RZ/Five.
Again, no DT support.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 17/22] spi: remove spi-jcore
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-jcore.c | 235 ----------------------------------------
3 files changed, 243 deletions(-)
delete mode 100644 drivers/spi/spi-jcore.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 76f3bc6f8c81fc..17c75f5c19be75 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -483,13 +483,6 @@ config SPI_INTEL_PLATFORM
To compile this driver as a module, choose M here: the module
will be called spi-intel-platform.
-config SPI_JCORE
- tristate "J-Core SPI Master"
- depends on OF && (SUPERH || COMPILE_TEST)
- help
- This enables support for the SPI master controller in the J-Core
- synthesizable, open source SoC.
-
config SPI_LM70_LLP
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
depends on PARPORT
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 27d877440c6539..2d03fcefc11ea2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SPI_INTEL) += spi-intel.o
obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o
obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o
obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
-obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
deleted file mode 100644
index 74c8319c29f170..00000000000000
--- a/drivers/spi/spi-jcore.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * J-Core SPI controller driver
- *
- * Copyright (C) 2012-2016 Smart Energy Instruments, Inc.
- *
- * Current version by Rich Felker
- * Based loosely on initial version by Oleksandr G Zhadan
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/delay.h>
-
-#define DRV_NAME "jcore_spi"
-
-#define CTRL_REG 0x0
-#define DATA_REG 0x4
-
-#define JCORE_SPI_CTRL_XMIT 0x02
-#define JCORE_SPI_STAT_BUSY 0x02
-#define JCORE_SPI_CTRL_LOOP 0x08
-#define JCORE_SPI_CTRL_CS_BITS 0x15
-
-#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000
-
-struct jcore_spi {
- struct spi_master *master;
- void __iomem *base;
- unsigned int cs_reg;
- unsigned int speed_reg;
- unsigned int speed_hz;
- unsigned int clock_freq;
-};
-
-static int jcore_spi_wait(void __iomem *ctrl_reg)
-{
- unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
-
- do {
- if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY))
- return 0;
- cpu_relax();
- } while (--timeout);
-
- return -EBUSY;
-}
-
-static void jcore_spi_program(struct jcore_spi *hw)
-{
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
-
- if (jcore_spi_wait(ctrl_reg))
- dev_err(hw->master->dev.parent,
- "timeout waiting to program ctrl reg.\n");
-
- writel(hw->cs_reg | hw->speed_reg, ctrl_reg);
-}
-
-static void jcore_spi_chipsel(struct spi_device *spi, bool value)
-{
- struct jcore_spi *hw = spi_master_get_devdata(spi->master);
- u32 csbit = 1U << (2 * spi->chip_select);
-
- dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select);
-
- if (value)
- hw->cs_reg |= csbit;
- else
- hw->cs_reg &= ~csbit;
-
- jcore_spi_program(hw);
-}
-
-static void jcore_spi_baudrate(struct jcore_spi *hw, int speed)
-{
- if (speed == hw->speed_hz)
- return;
- hw->speed_hz = speed;
- if (speed >= hw->clock_freq / 2)
- hw->speed_reg = 0;
- else
- hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27;
- jcore_spi_program(hw);
- dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n",
- speed, hw->speed_reg);
-}
-
-static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct jcore_spi *hw = spi_master_get_devdata(master);
-
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
- void __iomem *data_reg = hw->base + DATA_REG;
- u32 xmit;
-
- /* data buffers */
- const unsigned char *tx;
- unsigned char *rx;
- unsigned int len;
- unsigned int count;
-
- jcore_spi_baudrate(hw, t->speed_hz);
-
- xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT;
- tx = t->tx_buf;
- rx = t->rx_buf;
- len = t->len;
-
- for (count = 0; count < len; count++) {
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- writel(tx ? *tx++ : 0, data_reg);
- writel(xmit, ctrl_reg);
-
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- if (rx)
- *rx++ = readl(data_reg);
- }
-
- spi_finalize_current_transfer(master);
-
- if (count < len)
- return -EREMOTEIO;
-
- return 0;
-}
-
-static int jcore_spi_probe(struct platform_device *pdev)
-{
- struct device_node *node = pdev->dev.of_node;
- struct jcore_spi *hw;
- struct spi_master *master;
- struct resource *res;
- u32 clock_freq;
- struct clk *clk;
- int err = -ENODEV;
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi));
- if (!master)
- return err;
-
- /* Setup the master state. */
- master->num_chipselect = 3;
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- master->transfer_one = jcore_spi_txrx;
- master->set_cs = jcore_spi_chipsel;
- master->dev.of_node = node;
- master->bus_num = pdev->id;
-
- hw = spi_master_get_devdata(master);
- hw->master = master;
- platform_set_drvdata(pdev, hw);
-
- /* Find and map our resources */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name))
- goto exit_busy;
- hw->base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!hw->base)
- goto exit_busy;
-
- /*
- * The SPI clock rate controlled via a configurable clock divider
- * which is applied to the reference clock. A 50 MHz reference is
- * most suitable for obtaining standard SPI clock rates, but some
- * designs may have a different reference clock, and the DT must
- * make the driver aware so that it can properly program the
- * requested rate. If the clock is omitted, 50 MHz is assumed.
- */
- clock_freq = 50000000;
- clk = devm_clk_get(&pdev->dev, "ref_clk");
- if (!IS_ERR(clk)) {
- if (clk_prepare_enable(clk) == 0) {
- clock_freq = clk_get_rate(clk);
- clk_disable_unprepare(clk);
- } else
- dev_warn(&pdev->dev, "could not enable ref_clk\n");
- }
- hw->clock_freq = clock_freq;
-
- /* Initialize all CS bits to high. */
- hw->cs_reg = JCORE_SPI_CTRL_CS_BITS;
- jcore_spi_baudrate(hw, 400000);
-
- /* Register our spi controller */
- err = devm_spi_register_master(&pdev->dev, master);
- if (err)
- goto exit;
-
- return 0;
-
-exit_busy:
- err = -EBUSY;
-exit:
- spi_master_put(master);
- return err;
-}
-
-static const struct of_device_id jcore_spi_of_match[] = {
- { .compatible = "jcore,spi2" },
- {},
-};
-MODULE_DEVICE_TABLE(of, jcore_spi_of_match);
-
-static struct platform_driver jcore_spi_driver = {
- .probe = jcore_spi_probe,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = jcore_spi_of_match,
- },
-};
-
-module_platform_driver(jcore_spi_driver);
-
-MODULE_DESCRIPTION("J-Core SPI driver");
-MODULE_AUTHOR("Rich Felker <dalias@libc.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 17/22] spi: remove spi-jcore
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-jcore.c | 235 ----------------------------------------
3 files changed, 243 deletions(-)
delete mode 100644 drivers/spi/spi-jcore.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 76f3bc6f8c81fc..17c75f5c19be75 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -483,13 +483,6 @@ config SPI_INTEL_PLATFORM
To compile this driver as a module, choose M here: the module
will be called spi-intel-platform.
-config SPI_JCORE
- tristate "J-Core SPI Master"
- depends on OF && (SUPERH || COMPILE_TEST)
- help
- This enables support for the SPI master controller in the J-Core
- synthesizable, open source SoC.
-
config SPI_LM70_LLP
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
depends on PARPORT
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 27d877440c6539..2d03fcefc11ea2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SPI_INTEL) += spi-intel.o
obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o
obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o
obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
-obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
deleted file mode 100644
index 74c8319c29f170..00000000000000
--- a/drivers/spi/spi-jcore.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * J-Core SPI controller driver
- *
- * Copyright (C) 2012-2016 Smart Energy Instruments, Inc.
- *
- * Current version by Rich Felker
- * Based loosely on initial version by Oleksandr G Zhadan
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/delay.h>
-
-#define DRV_NAME "jcore_spi"
-
-#define CTRL_REG 0x0
-#define DATA_REG 0x4
-
-#define JCORE_SPI_CTRL_XMIT 0x02
-#define JCORE_SPI_STAT_BUSY 0x02
-#define JCORE_SPI_CTRL_LOOP 0x08
-#define JCORE_SPI_CTRL_CS_BITS 0x15
-
-#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000
-
-struct jcore_spi {
- struct spi_master *master;
- void __iomem *base;
- unsigned int cs_reg;
- unsigned int speed_reg;
- unsigned int speed_hz;
- unsigned int clock_freq;
-};
-
-static int jcore_spi_wait(void __iomem *ctrl_reg)
-{
- unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
-
- do {
- if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY))
- return 0;
- cpu_relax();
- } while (--timeout);
-
- return -EBUSY;
-}
-
-static void jcore_spi_program(struct jcore_spi *hw)
-{
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
-
- if (jcore_spi_wait(ctrl_reg))
- dev_err(hw->master->dev.parent,
- "timeout waiting to program ctrl reg.\n");
-
- writel(hw->cs_reg | hw->speed_reg, ctrl_reg);
-}
-
-static void jcore_spi_chipsel(struct spi_device *spi, bool value)
-{
- struct jcore_spi *hw = spi_master_get_devdata(spi->master);
- u32 csbit = 1U << (2 * spi->chip_select);
-
- dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select);
-
- if (value)
- hw->cs_reg |= csbit;
- else
- hw->cs_reg &= ~csbit;
-
- jcore_spi_program(hw);
-}
-
-static void jcore_spi_baudrate(struct jcore_spi *hw, int speed)
-{
- if (speed == hw->speed_hz)
- return;
- hw->speed_hz = speed;
- if (speed >= hw->clock_freq / 2)
- hw->speed_reg = 0;
- else
- hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27;
- jcore_spi_program(hw);
- dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n",
- speed, hw->speed_reg);
-}
-
-static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct jcore_spi *hw = spi_master_get_devdata(master);
-
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
- void __iomem *data_reg = hw->base + DATA_REG;
- u32 xmit;
-
- /* data buffers */
- const unsigned char *tx;
- unsigned char *rx;
- unsigned int len;
- unsigned int count;
-
- jcore_spi_baudrate(hw, t->speed_hz);
-
- xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT;
- tx = t->tx_buf;
- rx = t->rx_buf;
- len = t->len;
-
- for (count = 0; count < len; count++) {
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- writel(tx ? *tx++ : 0, data_reg);
- writel(xmit, ctrl_reg);
-
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- if (rx)
- *rx++ = readl(data_reg);
- }
-
- spi_finalize_current_transfer(master);
-
- if (count < len)
- return -EREMOTEIO;
-
- return 0;
-}
-
-static int jcore_spi_probe(struct platform_device *pdev)
-{
- struct device_node *node = pdev->dev.of_node;
- struct jcore_spi *hw;
- struct spi_master *master;
- struct resource *res;
- u32 clock_freq;
- struct clk *clk;
- int err = -ENODEV;
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi));
- if (!master)
- return err;
-
- /* Setup the master state. */
- master->num_chipselect = 3;
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- master->transfer_one = jcore_spi_txrx;
- master->set_cs = jcore_spi_chipsel;
- master->dev.of_node = node;
- master->bus_num = pdev->id;
-
- hw = spi_master_get_devdata(master);
- hw->master = master;
- platform_set_drvdata(pdev, hw);
-
- /* Find and map our resources */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name))
- goto exit_busy;
- hw->base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!hw->base)
- goto exit_busy;
-
- /*
- * The SPI clock rate controlled via a configurable clock divider
- * which is applied to the reference clock. A 50 MHz reference is
- * most suitable for obtaining standard SPI clock rates, but some
- * designs may have a different reference clock, and the DT must
- * make the driver aware so that it can properly program the
- * requested rate. If the clock is omitted, 50 MHz is assumed.
- */
- clock_freq = 50000000;
- clk = devm_clk_get(&pdev->dev, "ref_clk");
- if (!IS_ERR(clk)) {
- if (clk_prepare_enable(clk) == 0) {
- clock_freq = clk_get_rate(clk);
- clk_disable_unprepare(clk);
- } else
- dev_warn(&pdev->dev, "could not enable ref_clk\n");
- }
- hw->clock_freq = clock_freq;
-
- /* Initialize all CS bits to high. */
- hw->cs_reg = JCORE_SPI_CTRL_CS_BITS;
- jcore_spi_baudrate(hw, 400000);
-
- /* Register our spi controller */
- err = devm_spi_register_master(&pdev->dev, master);
- if (err)
- goto exit;
-
- return 0;
-
-exit_busy:
- err = -EBUSY;
-exit:
- spi_master_put(master);
- return err;
-}
-
-static const struct of_device_id jcore_spi_of_match[] = {
- { .compatible = "jcore,spi2" },
- {},
-};
-MODULE_DEVICE_TABLE(of, jcore_spi_of_match);
-
-static struct platform_driver jcore_spi_driver = {
- .probe = jcore_spi_probe,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = jcore_spi_of_match,
- },
-};
-
-module_platform_driver(jcore_spi_driver);
-
-MODULE_DESCRIPTION("J-Core SPI driver");
-MODULE_AUTHOR("Rich Felker <dalias@libc.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 17/22] spi: remove spi-jcore
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/spi/Kconfig | 7 --
drivers/spi/Makefile | 1 -
drivers/spi/spi-jcore.c | 235 ----------------------------------------
3 files changed, 243 deletions(-)
delete mode 100644 drivers/spi/spi-jcore.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 76f3bc6f8c81fc..17c75f5c19be75 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -483,13 +483,6 @@ config SPI_INTEL_PLATFORM
To compile this driver as a module, choose M here: the module
will be called spi-intel-platform.
-config SPI_JCORE
- tristate "J-Core SPI Master"
- depends on OF && (SUPERH || COMPILE_TEST)
- help
- This enables support for the SPI master controller in the J-Core
- synthesizable, open source SoC.
-
config SPI_LM70_LLP
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
depends on PARPORT
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 27d877440c6539..2d03fcefc11ea2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SPI_INTEL) += spi-intel.o
obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o
obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o
obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o
-obj-$(CONFIG_SPI_JCORE) += spi-jcore.o
obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o
obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c
deleted file mode 100644
index 74c8319c29f170..00000000000000
--- a/drivers/spi/spi-jcore.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * J-Core SPI controller driver
- *
- * Copyright (C) 2012-2016 Smart Energy Instruments, Inc.
- *
- * Current version by Rich Felker
- * Based loosely on initial version by Oleksandr G Zhadan
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/delay.h>
-
-#define DRV_NAME "jcore_spi"
-
-#define CTRL_REG 0x0
-#define DATA_REG 0x4
-
-#define JCORE_SPI_CTRL_XMIT 0x02
-#define JCORE_SPI_STAT_BUSY 0x02
-#define JCORE_SPI_CTRL_LOOP 0x08
-#define JCORE_SPI_CTRL_CS_BITS 0x15
-
-#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000
-
-struct jcore_spi {
- struct spi_master *master;
- void __iomem *base;
- unsigned int cs_reg;
- unsigned int speed_reg;
- unsigned int speed_hz;
- unsigned int clock_freq;
-};
-
-static int jcore_spi_wait(void __iomem *ctrl_reg)
-{
- unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
-
- do {
- if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY))
- return 0;
- cpu_relax();
- } while (--timeout);
-
- return -EBUSY;
-}
-
-static void jcore_spi_program(struct jcore_spi *hw)
-{
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
-
- if (jcore_spi_wait(ctrl_reg))
- dev_err(hw->master->dev.parent,
- "timeout waiting to program ctrl reg.\n");
-
- writel(hw->cs_reg | hw->speed_reg, ctrl_reg);
-}
-
-static void jcore_spi_chipsel(struct spi_device *spi, bool value)
-{
- struct jcore_spi *hw = spi_master_get_devdata(spi->master);
- u32 csbit = 1U << (2 * spi->chip_select);
-
- dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select);
-
- if (value)
- hw->cs_reg |= csbit;
- else
- hw->cs_reg &= ~csbit;
-
- jcore_spi_program(hw);
-}
-
-static void jcore_spi_baudrate(struct jcore_spi *hw, int speed)
-{
- if (speed == hw->speed_hz)
- return;
- hw->speed_hz = speed;
- if (speed >= hw->clock_freq / 2)
- hw->speed_reg = 0;
- else
- hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27;
- jcore_spi_program(hw);
- dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n",
- speed, hw->speed_reg);
-}
-
-static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct jcore_spi *hw = spi_master_get_devdata(master);
-
- void __iomem *ctrl_reg = hw->base + CTRL_REG;
- void __iomem *data_reg = hw->base + DATA_REG;
- u32 xmit;
-
- /* data buffers */
- const unsigned char *tx;
- unsigned char *rx;
- unsigned int len;
- unsigned int count;
-
- jcore_spi_baudrate(hw, t->speed_hz);
-
- xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT;
- tx = t->tx_buf;
- rx = t->rx_buf;
- len = t->len;
-
- for (count = 0; count < len; count++) {
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- writel(tx ? *tx++ : 0, data_reg);
- writel(xmit, ctrl_reg);
-
- if (jcore_spi_wait(ctrl_reg))
- break;
-
- if (rx)
- *rx++ = readl(data_reg);
- }
-
- spi_finalize_current_transfer(master);
-
- if (count < len)
- return -EREMOTEIO;
-
- return 0;
-}
-
-static int jcore_spi_probe(struct platform_device *pdev)
-{
- struct device_node *node = pdev->dev.of_node;
- struct jcore_spi *hw;
- struct spi_master *master;
- struct resource *res;
- u32 clock_freq;
- struct clk *clk;
- int err = -ENODEV;
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi));
- if (!master)
- return err;
-
- /* Setup the master state. */
- master->num_chipselect = 3;
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- master->transfer_one = jcore_spi_txrx;
- master->set_cs = jcore_spi_chipsel;
- master->dev.of_node = node;
- master->bus_num = pdev->id;
-
- hw = spi_master_get_devdata(master);
- hw->master = master;
- platform_set_drvdata(pdev, hw);
-
- /* Find and map our resources */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name))
- goto exit_busy;
- hw->base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!hw->base)
- goto exit_busy;
-
- /*
- * The SPI clock rate controlled via a configurable clock divider
- * which is applied to the reference clock. A 50 MHz reference is
- * most suitable for obtaining standard SPI clock rates, but some
- * designs may have a different reference clock, and the DT must
- * make the driver aware so that it can properly program the
- * requested rate. If the clock is omitted, 50 MHz is assumed.
- */
- clock_freq = 50000000;
- clk = devm_clk_get(&pdev->dev, "ref_clk");
- if (!IS_ERR(clk)) {
- if (clk_prepare_enable(clk) == 0) {
- clock_freq = clk_get_rate(clk);
- clk_disable_unprepare(clk);
- } else
- dev_warn(&pdev->dev, "could not enable ref_clk\n");
- }
- hw->clock_freq = clock_freq;
-
- /* Initialize all CS bits to high. */
- hw->cs_reg = JCORE_SPI_CTRL_CS_BITS;
- jcore_spi_baudrate(hw, 400000);
-
- /* Register our spi controller */
- err = devm_spi_register_master(&pdev->dev, master);
- if (err)
- goto exit;
-
- return 0;
-
-exit_busy:
- err = -EBUSY;
-exit:
- spi_master_put(master);
- return err;
-}
-
-static const struct of_device_id jcore_spi_of_match[] = {
- { .compatible = "jcore,spi2" },
- {},
-};
-MODULE_DEVICE_TABLE(of, jcore_spi_of_match);
-
-static struct platform_driver jcore_spi_driver = {
- .probe = jcore_spi_probe,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = jcore_spi_of_match,
- },
-};
-
-module_platform_driver(jcore_spi_driver);
-
-MODULE_DESCRIPTION("J-Core SPI driver");
-MODULE_AUTHOR("Rich Felker <dalias@libc.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 18/22] usb: remove ehci-sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 7 --
drivers/usb/host/ehci-hcd.c | 7 --
drivers/usb/host/ehci-sh.c | 182 ------------------------------------
3 files changed, 196 deletions(-)
delete mode 100644 drivers/usb/host/ehci-sh.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ca5f657c092cf4..ddd8b798626caf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -279,13 +279,6 @@ config USB_EHCI_HCD_PPC_OF
Enables support for the USB controller present on the PowerPC
OpenFirmware platform bus.
-config USB_EHCI_SH
- bool "EHCI support for SuperH USB controller"
- depends on SUPERH || COMPILE_TEST
- help
- Enables support for the on-chip EHCI controller on the SuperH.
- If you use the PCI EHCI controller, this option is not necessary.
-
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a1930db0da1c3c..e6dfef3492aabe 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1309,10 +1309,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_USB_EHCI_SH
-#include "ehci-sh.c"
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#endif
@@ -1330,9 +1326,6 @@ MODULE_LICENSE ("GPL");
#endif
static struct platform_driver * const platform_drivers[] = {
-#ifdef CONFIG_USB_EHCI_SH
- &ehci_hcd_sh_driver,
-#endif
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
&ehci_hcd_ppc_of_driver,
#endif
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
deleted file mode 100644
index c25c51d26f2603..00000000000000
--- a/drivers/usb/host/ehci-sh.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH EHCI host controller driver
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Based on ohci-sh.c and ehci-atmel.c.
- */
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-struct ehci_sh_priv {
- struct clk *iclk, *fclk;
- struct usb_hcd *hcd;
-};
-
-static int ehci_sh_reset(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs;
-
- return ehci_setup(hcd);
-}
-
-static const struct hc_driver ehci_sh_hc_driver = {
- .description = hcd_name,
- .product_desc = "SuperH EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_sh_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-
-#ifdef CONFIG_PM
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
-
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct ehci_sh_priv *priv;
- struct usb_hcd *hcd;
- int irq, ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- ret = -ENODEV;
- goto fail_create_hcd;
- }
-
- /* initialize hcd */
- hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd) {
- ret = -ENOMEM;
- goto fail_create_hcd;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto fail_request_resource;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv),
- GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto fail_request_resource;
- }
-
- /* These are optional, we don't care if they fail */
- priv->fclk = devm_clk_get(&pdev->dev, "usb_fck");
- if (IS_ERR(priv->fclk))
- priv->fclk = NULL;
-
- priv->iclk = devm_clk_get(&pdev->dev, "usb_ick");
- if (IS_ERR(priv->iclk))
- priv->iclk = NULL;
-
- clk_enable(priv->fclk);
- clk_enable(priv->iclk);
-
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret != 0) {
- dev_err(&pdev->dev, "Failed to add hcd");
- goto fail_add_hcd;
- }
- device_wakeup_enable(hcd->self.controller);
-
- priv->hcd = hcd;
- platform_set_drvdata(pdev, priv);
-
- return ret;
-
-fail_add_hcd:
- clk_disable(priv->iclk);
- clk_disable(priv->fclk);
-
-fail_request_resource:
- usb_put_hcd(hcd);
-fail_create_hcd:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
-
- return ret;
-}
-
-static int ehci_hcd_sh_remove(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- clk_disable(priv->fclk);
- clk_disable(priv->iclk);
-
- return 0;
-}
-
-static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
-}
-
-static struct platform_driver ehci_hcd_sh_driver = {
- .probe = ehci_hcd_sh_probe,
- .remove = ehci_hcd_sh_remove,
- .shutdown = ehci_hcd_sh_shutdown,
- .driver = {
- .name = "sh_ehci",
- },
-};
-
-MODULE_ALIAS("platform:sh_ehci");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 18/22] usb: remove ehci-sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 7 --
drivers/usb/host/ehci-hcd.c | 7 --
drivers/usb/host/ehci-sh.c | 182 ------------------------------------
3 files changed, 196 deletions(-)
delete mode 100644 drivers/usb/host/ehci-sh.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ca5f657c092cf4..ddd8b798626caf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -279,13 +279,6 @@ config USB_EHCI_HCD_PPC_OF
Enables support for the USB controller present on the PowerPC
OpenFirmware platform bus.
-config USB_EHCI_SH
- bool "EHCI support for SuperH USB controller"
- depends on SUPERH || COMPILE_TEST
- help
- Enables support for the on-chip EHCI controller on the SuperH.
- If you use the PCI EHCI controller, this option is not necessary.
-
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a1930db0da1c3c..e6dfef3492aabe 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1309,10 +1309,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_USB_EHCI_SH
-#include "ehci-sh.c"
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#endif
@@ -1330,9 +1326,6 @@ MODULE_LICENSE ("GPL");
#endif
static struct platform_driver * const platform_drivers[] = {
-#ifdef CONFIG_USB_EHCI_SH
- &ehci_hcd_sh_driver,
-#endif
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
&ehci_hcd_ppc_of_driver,
#endif
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
deleted file mode 100644
index c25c51d26f2603..00000000000000
--- a/drivers/usb/host/ehci-sh.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH EHCI host controller driver
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Based on ohci-sh.c and ehci-atmel.c.
- */
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-struct ehci_sh_priv {
- struct clk *iclk, *fclk;
- struct usb_hcd *hcd;
-};
-
-static int ehci_sh_reset(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs;
-
- return ehci_setup(hcd);
-}
-
-static const struct hc_driver ehci_sh_hc_driver = {
- .description = hcd_name,
- .product_desc = "SuperH EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_sh_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-
-#ifdef CONFIG_PM
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
-
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct ehci_sh_priv *priv;
- struct usb_hcd *hcd;
- int irq, ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- ret = -ENODEV;
- goto fail_create_hcd;
- }
-
- /* initialize hcd */
- hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd) {
- ret = -ENOMEM;
- goto fail_create_hcd;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto fail_request_resource;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv),
- GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto fail_request_resource;
- }
-
- /* These are optional, we don't care if they fail */
- priv->fclk = devm_clk_get(&pdev->dev, "usb_fck");
- if (IS_ERR(priv->fclk))
- priv->fclk = NULL;
-
- priv->iclk = devm_clk_get(&pdev->dev, "usb_ick");
- if (IS_ERR(priv->iclk))
- priv->iclk = NULL;
-
- clk_enable(priv->fclk);
- clk_enable(priv->iclk);
-
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret != 0) {
- dev_err(&pdev->dev, "Failed to add hcd");
- goto fail_add_hcd;
- }
- device_wakeup_enable(hcd->self.controller);
-
- priv->hcd = hcd;
- platform_set_drvdata(pdev, priv);
-
- return ret;
-
-fail_add_hcd:
- clk_disable(priv->iclk);
- clk_disable(priv->fclk);
-
-fail_request_resource:
- usb_put_hcd(hcd);
-fail_create_hcd:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
-
- return ret;
-}
-
-static int ehci_hcd_sh_remove(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- clk_disable(priv->fclk);
- clk_disable(priv->iclk);
-
- return 0;
-}
-
-static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
-}
-
-static struct platform_driver ehci_hcd_sh_driver = {
- .probe = ehci_hcd_sh_probe,
- .remove = ehci_hcd_sh_remove,
- .shutdown = ehci_hcd_sh_shutdown,
- .driver = {
- .name = "sh_ehci",
- },
-};
-
-MODULE_ALIAS("platform:sh_ehci");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 18/22] usb: remove ehci-sh
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/usb/host/Kconfig | 7 --
drivers/usb/host/ehci-hcd.c | 7 --
drivers/usb/host/ehci-sh.c | 182 ------------------------------------
3 files changed, 196 deletions(-)
delete mode 100644 drivers/usb/host/ehci-sh.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ca5f657c092cf4..ddd8b798626caf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -279,13 +279,6 @@ config USB_EHCI_HCD_PPC_OF
Enables support for the USB controller present on the PowerPC
OpenFirmware platform bus.
-config USB_EHCI_SH
- bool "EHCI support for SuperH USB controller"
- depends on SUPERH || COMPILE_TEST
- help
- Enables support for the on-chip EHCI controller on the SuperH.
- If you use the PCI EHCI controller, this option is not necessary.
-
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/Exynos SoC Series"
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a1930db0da1c3c..e6dfef3492aabe 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1309,10 +1309,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_USB_EHCI_SH
-#include "ehci-sh.c"
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#endif
@@ -1330,9 +1326,6 @@ MODULE_LICENSE ("GPL");
#endif
static struct platform_driver * const platform_drivers[] = {
-#ifdef CONFIG_USB_EHCI_SH
- &ehci_hcd_sh_driver,
-#endif
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
&ehci_hcd_ppc_of_driver,
#endif
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
deleted file mode 100644
index c25c51d26f2603..00000000000000
--- a/drivers/usb/host/ehci-sh.c
+++ /dev/null
@@ -1,182 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH EHCI host controller driver
- *
- * Copyright (C) 2010 Paul Mundt
- *
- * Based on ohci-sh.c and ehci-atmel.c.
- */
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-struct ehci_sh_priv {
- struct clk *iclk, *fclk;
- struct usb_hcd *hcd;
-};
-
-static int ehci_sh_reset(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- ehci->caps = hcd->regs;
-
- return ehci_setup(hcd);
-}
-
-static const struct hc_driver ehci_sh_hc_driver = {
- .description = hcd_name,
- .product_desc = "SuperH EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_sh_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-
-#ifdef CONFIG_PM
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
-
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_sh_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct ehci_sh_priv *priv;
- struct usb_hcd *hcd;
- int irq, ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- ret = -ENODEV;
- goto fail_create_hcd;
- }
-
- /* initialize hcd */
- hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd) {
- ret = -ENOMEM;
- goto fail_create_hcd;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
- goto fail_request_resource;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv),
- GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto fail_request_resource;
- }
-
- /* These are optional, we don't care if they fail */
- priv->fclk = devm_clk_get(&pdev->dev, "usb_fck");
- if (IS_ERR(priv->fclk))
- priv->fclk = NULL;
-
- priv->iclk = devm_clk_get(&pdev->dev, "usb_ick");
- if (IS_ERR(priv->iclk))
- priv->iclk = NULL;
-
- clk_enable(priv->fclk);
- clk_enable(priv->iclk);
-
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret != 0) {
- dev_err(&pdev->dev, "Failed to add hcd");
- goto fail_add_hcd;
- }
- device_wakeup_enable(hcd->self.controller);
-
- priv->hcd = hcd;
- platform_set_drvdata(pdev, priv);
-
- return ret;
-
-fail_add_hcd:
- clk_disable(priv->iclk);
- clk_disable(priv->fclk);
-
-fail_request_resource:
- usb_put_hcd(hcd);
-fail_create_hcd:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
-
- return ret;
-}
-
-static int ehci_hcd_sh_remove(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- clk_disable(priv->fclk);
- clk_disable(priv->iclk);
-
- return 0;
-}
-
-static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
-{
- struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
-
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
-}
-
-static struct platform_driver ehci_hcd_sh_driver = {
- .probe = ehci_hcd_sh_probe,
- .remove = ehci_hcd_sh_remove,
- .shutdown = ehci_hcd_sh_shutdown,
- .driver = {
- .name = "sh_ehci",
- },
-};
-
-MODULE_ALIAS("platform:sh_ehci");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 19/22] fbdev: remove sh7760fb
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/video/fbdev/Kconfig | 17 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/sh7760fb.c | 587 ---------------------------------
3 files changed, 1 insertion(+), 604 deletions(-)
delete mode 100644 drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index b2bed599e6c6ea..cba0ba512a6ddb 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1861,7 +1861,7 @@ config FB_W100
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
@@ -2048,21 +2048,6 @@ config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
-config FB_SH7760
- bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
- depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
- || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the SH7760/SH7763/SH7720/SH7721 integrated
- (D)STN/TFT LCD Controller.
- Supports display resolutions up to 1024x1024 pixel, grayscale and
- color operation, with depths ranging from 1 bpp to 8 bpp monochrome
- and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
- panels <= 320 pixel horizontal resolution.
-
config FB_DA8XX
tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 7795c4126706fd..9941a30522b4b3 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
deleted file mode 100644
index 5978a892123226..00000000000000
--- a/drivers/video/fbdev/sh7760fb.c
+++ /dev/null
@@ -1,587 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760/SH7763 LCDC Framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.rst!
- *
- * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
- * for his original source and testing!
- *
- * sh7760_setcolreg get from drivers/video/sh_mobile_lcdcfb.c
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/sh7760fb.h>
-
-struct sh7760fb_par {
- void __iomem *base;
- int irq;
-
- struct sh7760fb_platdata *pd; /* display information */
-
- dma_addr_t fbdma; /* physical address */
-
- int rot; /* rotation enabled? */
-
- u32 pseudo_palette[16];
-
- struct platform_device *dev;
- struct resource *ioarea;
- struct completion vsync; /* vsync irq event */
-};
-
-static irqreturn_t sh7760fb_irq(int irq, void *data)
-{
- struct completion *c = data;
-
- complete(c);
-
- return IRQ_HANDLED;
-}
-
-/* wait_for_lps - wait until power supply has reached a certain state. */
-static int wait_for_lps(struct sh7760fb_par *par, int val)
-{
- int i = 100;
- while (--i && ((ioread16(par->base + LDPMMR) & 3) != val))
- msleep(1);
-
- if (i <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-/* en/disable the LCDC */
-static int sh7760fb_blank(int blank, struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct sh7760fb_platdata *pd = par->pd;
- unsigned short cntr = ioread16(par->base + LDCNTR);
- unsigned short intr = ioread16(par->base + LDINTR);
- int lps;
-
- if (blank == FB_BLANK_UNBLANK) {
- intr |= VINT_START;
- cntr = LDCNTR_DON2 | LDCNTR_DON;
- lps = 3;
- } else {
- intr &= ~VINT_START;
- cntr = LDCNTR_DON2;
- lps = 0;
- }
-
- if (pd->blank)
- pd->blank(blank);
-
- iowrite16(intr, par->base + LDINTR);
- iowrite16(cntr, par->base + LDCNTR);
-
- return wait_for_lps(par, lps);
-}
-
-static int sh7760_setcolreg (u_int regno,
- u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info)
-{
- u32 *palette = info->pseudo_palette;
-
- if (regno >= 16)
- return -EINVAL;
-
- /* only FB_VISUAL_TRUECOLOR supported */
-
- red >>= 16 - info->var.red.length;
- green >>= 16 - info->var.green.length;
- blue >>= 16 - info->var.blue.length;
- transp >>= 16 - info->var.transp.length;
-
- palette[regno] = (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset) |
- (transp << info->var.transp.offset);
-
- return 0;
-}
-
-static int sh7760fb_get_color_info(struct device *dev,
- u16 lddfr, int *bpp, int *gray)
-{
- int lbpp, lgray;
-
- lgray = lbpp = 0;
-
- switch (lddfr & LDDFR_COLOR_MASK) {
- case LDDFR_1BPP_MONO:
- lgray = 1;
- lbpp = 1;
- break;
- case LDDFR_2BPP_MONO:
- lgray = 1;
- lbpp = 2;
- break;
- case LDDFR_4BPP_MONO:
- lgray = 1;
- case LDDFR_4BPP:
- lbpp = 4;
- break;
- case LDDFR_6BPP_MONO:
- lgray = 1;
- case LDDFR_8BPP:
- lbpp = 8;
- break;
- case LDDFR_16BPP_RGB555:
- case LDDFR_16BPP_RGB565:
- lbpp = 16;
- lgray = 0;
- break;
- default:
- dev_dbg(dev, "unsupported LDDFR bit depth.\n");
- return -EINVAL;
- }
-
- if (bpp)
- *bpp = lbpp;
- if (gray)
- *gray = lgray;
-
- return 0;
-}
-
-static int sh7760fb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct fb_fix_screeninfo *fix = &info->fix;
- struct sh7760fb_par *par = info->par;
- int ret, bpp;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret)
- return ret;
-
- var->bits_per_pixel = bpp;
-
- if ((var->grayscale) && (var->bits_per_pixel == 1))
- fix->visual = FB_VISUAL_MONO10;
- else if (var->bits_per_pixel >= 15)
- fix->visual = FB_VISUAL_TRUECOLOR;
- else
- fix->visual = FB_VISUAL_PSEUDOCOLOR;
-
- /* TODO: add some more validation here */
- return 0;
-}
-
-/*
- * sh7760fb_set_par - set videomode.
- *
- * NOTE: The rotation, grayscale and DSTN codepaths are
- * totally untested!
- */
-static int sh7760fb_set_par(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct fb_videomode *vm = par->pd->def_mode;
- unsigned long sbase, dstn_off, ldsarl, stride;
- unsigned short hsynp, hsynw, htcn, hdcn;
- unsigned short vsynp, vsynw, vtln, vdln;
- unsigned short lddfr, ldmtr;
- int ret, bpp, gray;
-
- par->rot = par->pd->rotate;
-
- /* rotate only works with xres <= 320 */
- if (par->rot && (vm->xres > 320)) {
- dev_dbg(info->dev, "rotation disabled due to display size\n");
- par->rot = 0;
- }
-
- /* calculate LCDC reg vals from display parameters */
- hsynp = vm->right_margin + vm->xres;
- hsynw = vm->hsync_len;
- htcn = vm->left_margin + hsynp + hsynw;
- hdcn = vm->xres;
- vsynp = vm->lower_margin + vm->yres;
- vsynw = vm->vsync_len;
- vtln = vm->upper_margin + vsynp + vsynw;
- vdln = vm->yres;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray);
- if (ret)
- return ret;
-
- dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
- vdln, bpp, gray ? "grayscale" : "color",
- par->rot ? "rotated" : "normal");
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- lddfr = par->pd->lddfr | (1 << 8);
-#else
- lddfr = par->pd->lddfr & ~(1 << 8);
-#endif
-
- ldmtr = par->pd->ldmtr;
-
- if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT))
- ldmtr |= LDMTR_CL1POL;
- if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT))
- ldmtr |= LDMTR_FLMPOL;
-
- /* shut down LCDC before changing display parameters */
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
-
- iowrite16(par->pd->ldickr, par->base + LDICKR); /* pixclock */
- iowrite16(ldmtr, par->base + LDMTR); /* polarities */
- iowrite16(lddfr, par->base + LDDFR); /* color/depth */
- iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR); /* rotate */
- iowrite16(par->pd->ldpmmr, par->base + LDPMMR); /* Power Management */
- iowrite16(par->pd->ldpspr, par->base + LDPSPR); /* Power Supply Ctrl */
-
- /* display resolution */
- iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8),
- par->base + LDHCNR);
- iowrite16(vdln - 1, par->base + LDVDLNR);
- iowrite16(vtln - 1, par->base + LDVTLNR);
- /* h/v sync signals */
- iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR);
- iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12),
- par->base + LDHSYNR);
- /* AC modulation sig */
- iowrite16(par->pd->ldaclnr, par->base + LDACLNR);
-
- stride = (par->rot) ? vtln : hdcn;
- if (!gray)
- stride *= (bpp + 7) >> 3;
- else {
- if (bpp == 1)
- stride >>= 3;
- else if (bpp == 2)
- stride >>= 2;
- else if (bpp == 4)
- stride >>= 1;
- /* 6 bpp == 8 bpp */
- }
-
- /* if rotated, stride must be power of 2 */
- if (par->rot) {
- unsigned long bit = 1 << 31;
- while (bit) {
- if (stride & bit)
- break;
- bit >>= 1;
- }
- if (stride & ~bit)
- stride = bit << 1; /* not P-o-2, round up */
- }
- iowrite16(stride, par->base + LDLAOR);
-
- /* set display mem start address */
- sbase = (unsigned long)par->fbdma;
- if (par->rot)
- sbase += (hdcn - 1) * stride;
-
- iowrite32(sbase, par->base + LDSARU);
-
- /*
- * for DSTN need to set address for lower half.
- * I (mlau) don't know which address to set it to,
- * so I guessed at (stride * yres/2).
- */
- if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
- ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
-
- dev_dbg(info->dev, " ***** DSTN untested! *****\n");
-
- dstn_off = stride;
- if (par->rot)
- dstn_off *= hdcn >> 1;
- else
- dstn_off *= vdln >> 1;
-
- ldsarl = sbase + dstn_off;
- } else
- ldsarl = 0;
-
- iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
-
- info->fix.line_length = stride;
-
- sh7760fb_check_var(&info->var, info);
-
- sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
-
- dev_dbg(info->dev, "hdcn : %6d htcn : %6d\n", hdcn, htcn);
- dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
- dev_dbg(info->dev, "vdln : %6d vtln : %6d\n", vdln, vtln);
- dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
- dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
- (par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
- dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
- par->pd->ldpspr);
- dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
- dev_dbg(info->dev, "ldlaor: %ld\n", stride);
- dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
-
- return 0;
-}
-
-static const struct fb_ops sh7760fb_ops = {
- .owner = THIS_MODULE,
- .fb_blank = sh7760fb_blank,
- .fb_check_var = sh7760fb_check_var,
- .fb_setcolreg = sh7760_setcolreg,
- .fb_set_par = sh7760fb_set_par,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-static void sh7760fb_free_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
-
- if (!info->screen_base)
- return;
-
- dma_free_coherent(info->dev, info->screen_size,
- info->screen_base, par->fbdma);
-
- par->fbdma = 0;
- info->screen_base = NULL;
- info->screen_size = 0;
-}
-
-/* allocate the framebuffer memory. This memory must be in Area3,
- * (dictated by the DMA engine) and contiguous, at a 512 byte boundary.
- */
-static int sh7760fb_alloc_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- void *fbmem;
- unsigned long vram;
- int ret, bpp;
-
- if (info->screen_base)
- return 0;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret) {
- printk(KERN_ERR "colinfo\n");
- return ret;
- }
-
- /* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page
- max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */
-
- vram = info->var.xres * info->var.yres;
- if (info->var.grayscale) {
- if (bpp == 1)
- vram >>= 3;
- else if (bpp == 2)
- vram >>= 2;
- else if (bpp == 4)
- vram >>= 1;
- } else if (bpp > 8)
- vram *= 2;
- if ((vram < 1) || (vram > 1024 * 2048)) {
- dev_dbg(info->dev, "too much VRAM required. Check settings\n");
- return -ENODEV;
- }
-
- if (vram < PAGE_SIZE)
- vram = PAGE_SIZE;
-
- fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL);
-
- if (!fbmem)
- return -ENOMEM;
-
- if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) {
- sh7760fb_free_mem(info);
- dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is"
- "unusable for the LCDC\n", (unsigned long)par->fbdma);
- return -ENOMEM;
- }
-
- info->screen_base = fbmem;
- info->screen_size = vram;
- info->fix.smem_start = (unsigned long)info->screen_base;
- info->fix.smem_len = info->screen_size;
-
- return 0;
-}
-
-static int sh7760fb_probe(struct platform_device *pdev)
-{
- struct fb_info *info;
- struct resource *res;
- struct sh7760fb_par *par;
- int ret;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- par->dev = pdev;
-
- par->pd = pdev->dev.platform_data;
- if (!par->pd) {
- dev_dbg(info->dev, "no display setup data!\n");
- ret = -ENODEV;
- goto out_fb;
- }
-
- par->ioarea = request_mem_region(res->start,
- resource_size(res), pdev->name);
- if (!par->ioarea) {
- dev_err(&pdev->dev, "mmio area busy\n");
- ret = -EBUSY;
- goto out_fb;
- }
-
- par->base = ioremap(res->start, resource_size(res));
- if (!par->base) {
- dev_err(&pdev->dev, "cannot remap\n");
- ret = -ENODEV;
- goto out_res;
- }
-
- iowrite16(0, par->base + LDINTR); /* disable vsync irq */
- par->irq = platform_get_irq(pdev, 0);
- if (par->irq >= 0) {
- ret = request_irq(par->irq, sh7760fb_irq, 0,
- "sh7760-lcdc", &par->vsync);
- if (ret) {
- dev_err(&pdev->dev, "cannot grab IRQ\n");
- par->irq = -ENXIO;
- } else
- disable_irq_nosync(par->irq);
- }
-
- fb_videomode_to_var(&info->var, par->pd->def_mode);
-
- ret = sh7760fb_alloc_mem(info);
- if (ret) {
- dev_dbg(info->dev, "framebuffer memory allocation failed!\n");
- goto out_unmap;
- }
-
- info->pseudo_palette = par->pseudo_palette;
-
- /* fixup color register bitpositions. These are fixed by hardware */
- info->var.red.offset = 11;
- info->var.red.length = 5;
- info->var.red.msb_right = 0;
-
- info->var.green.offset = 5;
- info->var.green.length = 6;
- info->var.green.msb_right = 0;
-
- info->var.blue.offset = 0;
- info->var.blue.length = 5;
- info->var.blue.msb_right = 0;
-
- info->var.transp.offset = 0;
- info->var.transp.length = 0;
- info->var.transp.msb_right = 0;
-
- strcpy(info->fix.id, "sh7760-lcdc");
-
- /* set the DON2 bit now, before cmap allocation, as it will randomize
- * palette memory.
- */
- iowrite16(LDCNTR_DON2, par->base + LDCNTR);
- info->fbops = &sh7760fb_ops;
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret) {
- dev_dbg(info->dev, "Unable to allocate cmap memory\n");
- goto out_mem;
- }
-
- ret = register_framebuffer(info);
- if (ret < 0) {
- dev_dbg(info->dev, "cannot register fb!\n");
- goto out_cmap;
- }
- platform_set_drvdata(pdev, info);
-
- printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
- pdev->name,
- (unsigned long)par->fbdma,
- (unsigned long)(par->fbdma + info->screen_size - 1),
- info->screen_size >> 10);
-
- return 0;
-
-out_cmap:
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- fb_dealloc_cmap(&info->cmap);
-out_mem:
- sh7760fb_free_mem(info);
-out_unmap:
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
-out_res:
- release_mem_region(res->start, resource_size(res));
-out_fb:
- framebuffer_release(info);
- return ret;
-}
-
-static int sh7760fb_remove(struct platform_device *dev)
-{
- struct fb_info *info = platform_get_drvdata(dev);
- struct sh7760fb_par *par = info->par;
-
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- sh7760fb_free_mem(info);
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
- release_mem_region(par->ioarea->start, resource_size(par->ioarea));
- framebuffer_release(info);
-
- return 0;
-}
-
-static struct platform_driver sh7760_lcdc_driver = {
- .driver = {
- .name = "sh7760-lcdc",
- },
- .probe = sh7760fb_probe,
- .remove = sh7760fb_remove,
-};
-
-module_platform_driver(sh7760_lcdc_driver);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss");
-MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller");
-MODULE_LICENSE("GPL v2");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 19/22] fbdev: remove sh7760fb
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/video/fbdev/Kconfig | 17 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/sh7760fb.c | 587 ---------------------------------
3 files changed, 1 insertion(+), 604 deletions(-)
delete mode 100644 drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index b2bed599e6c6ea..cba0ba512a6ddb 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1861,7 +1861,7 @@ config FB_W100
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
@@ -2048,21 +2048,6 @@ config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
-config FB_SH7760
- bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
- depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
- || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the SH7760/SH7763/SH7720/SH7721 integrated
- (D)STN/TFT LCD Controller.
- Supports display resolutions up to 1024x1024 pixel, grayscale and
- color operation, with depths ranging from 1 bpp to 8 bpp monochrome
- and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
- panels <= 320 pixel horizontal resolution.
-
config FB_DA8XX
tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 7795c4126706fd..9941a30522b4b3 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
deleted file mode 100644
index 5978a892123226..00000000000000
--- a/drivers/video/fbdev/sh7760fb.c
+++ /dev/null
@@ -1,587 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760/SH7763 LCDC Framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.rst!
- *
- * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
- * for his original source and testing!
- *
- * sh7760_setcolreg get from drivers/video/sh_mobile_lcdcfb.c
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/sh7760fb.h>
-
-struct sh7760fb_par {
- void __iomem *base;
- int irq;
-
- struct sh7760fb_platdata *pd; /* display information */
-
- dma_addr_t fbdma; /* physical address */
-
- int rot; /* rotation enabled? */
-
- u32 pseudo_palette[16];
-
- struct platform_device *dev;
- struct resource *ioarea;
- struct completion vsync; /* vsync irq event */
-};
-
-static irqreturn_t sh7760fb_irq(int irq, void *data)
-{
- struct completion *c = data;
-
- complete(c);
-
- return IRQ_HANDLED;
-}
-
-/* wait_for_lps - wait until power supply has reached a certain state. */
-static int wait_for_lps(struct sh7760fb_par *par, int val)
-{
- int i = 100;
- while (--i && ((ioread16(par->base + LDPMMR) & 3) != val))
- msleep(1);
-
- if (i <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-/* en/disable the LCDC */
-static int sh7760fb_blank(int blank, struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct sh7760fb_platdata *pd = par->pd;
- unsigned short cntr = ioread16(par->base + LDCNTR);
- unsigned short intr = ioread16(par->base + LDINTR);
- int lps;
-
- if (blank == FB_BLANK_UNBLANK) {
- intr |= VINT_START;
- cntr = LDCNTR_DON2 | LDCNTR_DON;
- lps = 3;
- } else {
- intr &= ~VINT_START;
- cntr = LDCNTR_DON2;
- lps = 0;
- }
-
- if (pd->blank)
- pd->blank(blank);
-
- iowrite16(intr, par->base + LDINTR);
- iowrite16(cntr, par->base + LDCNTR);
-
- return wait_for_lps(par, lps);
-}
-
-static int sh7760_setcolreg (u_int regno,
- u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info)
-{
- u32 *palette = info->pseudo_palette;
-
- if (regno >= 16)
- return -EINVAL;
-
- /* only FB_VISUAL_TRUECOLOR supported */
-
- red >>= 16 - info->var.red.length;
- green >>= 16 - info->var.green.length;
- blue >>= 16 - info->var.blue.length;
- transp >>= 16 - info->var.transp.length;
-
- palette[regno] = (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset) |
- (transp << info->var.transp.offset);
-
- return 0;
-}
-
-static int sh7760fb_get_color_info(struct device *dev,
- u16 lddfr, int *bpp, int *gray)
-{
- int lbpp, lgray;
-
- lgray = lbpp = 0;
-
- switch (lddfr & LDDFR_COLOR_MASK) {
- case LDDFR_1BPP_MONO:
- lgray = 1;
- lbpp = 1;
- break;
- case LDDFR_2BPP_MONO:
- lgray = 1;
- lbpp = 2;
- break;
- case LDDFR_4BPP_MONO:
- lgray = 1;
- case LDDFR_4BPP:
- lbpp = 4;
- break;
- case LDDFR_6BPP_MONO:
- lgray = 1;
- case LDDFR_8BPP:
- lbpp = 8;
- break;
- case LDDFR_16BPP_RGB555:
- case LDDFR_16BPP_RGB565:
- lbpp = 16;
- lgray = 0;
- break;
- default:
- dev_dbg(dev, "unsupported LDDFR bit depth.\n");
- return -EINVAL;
- }
-
- if (bpp)
- *bpp = lbpp;
- if (gray)
- *gray = lgray;
-
- return 0;
-}
-
-static int sh7760fb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct fb_fix_screeninfo *fix = &info->fix;
- struct sh7760fb_par *par = info->par;
- int ret, bpp;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret)
- return ret;
-
- var->bits_per_pixel = bpp;
-
- if ((var->grayscale) && (var->bits_per_pixel == 1))
- fix->visual = FB_VISUAL_MONO10;
- else if (var->bits_per_pixel >= 15)
- fix->visual = FB_VISUAL_TRUECOLOR;
- else
- fix->visual = FB_VISUAL_PSEUDOCOLOR;
-
- /* TODO: add some more validation here */
- return 0;
-}
-
-/*
- * sh7760fb_set_par - set videomode.
- *
- * NOTE: The rotation, grayscale and DSTN codepaths are
- * totally untested!
- */
-static int sh7760fb_set_par(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct fb_videomode *vm = par->pd->def_mode;
- unsigned long sbase, dstn_off, ldsarl, stride;
- unsigned short hsynp, hsynw, htcn, hdcn;
- unsigned short vsynp, vsynw, vtln, vdln;
- unsigned short lddfr, ldmtr;
- int ret, bpp, gray;
-
- par->rot = par->pd->rotate;
-
- /* rotate only works with xres <= 320 */
- if (par->rot && (vm->xres > 320)) {
- dev_dbg(info->dev, "rotation disabled due to display size\n");
- par->rot = 0;
- }
-
- /* calculate LCDC reg vals from display parameters */
- hsynp = vm->right_margin + vm->xres;
- hsynw = vm->hsync_len;
- htcn = vm->left_margin + hsynp + hsynw;
- hdcn = vm->xres;
- vsynp = vm->lower_margin + vm->yres;
- vsynw = vm->vsync_len;
- vtln = vm->upper_margin + vsynp + vsynw;
- vdln = vm->yres;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray);
- if (ret)
- return ret;
-
- dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
- vdln, bpp, gray ? "grayscale" : "color",
- par->rot ? "rotated" : "normal");
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- lddfr = par->pd->lddfr | (1 << 8);
-#else
- lddfr = par->pd->lddfr & ~(1 << 8);
-#endif
-
- ldmtr = par->pd->ldmtr;
-
- if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT))
- ldmtr |= LDMTR_CL1POL;
- if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT))
- ldmtr |= LDMTR_FLMPOL;
-
- /* shut down LCDC before changing display parameters */
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
-
- iowrite16(par->pd->ldickr, par->base + LDICKR); /* pixclock */
- iowrite16(ldmtr, par->base + LDMTR); /* polarities */
- iowrite16(lddfr, par->base + LDDFR); /* color/depth */
- iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR); /* rotate */
- iowrite16(par->pd->ldpmmr, par->base + LDPMMR); /* Power Management */
- iowrite16(par->pd->ldpspr, par->base + LDPSPR); /* Power Supply Ctrl */
-
- /* display resolution */
- iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8),
- par->base + LDHCNR);
- iowrite16(vdln - 1, par->base + LDVDLNR);
- iowrite16(vtln - 1, par->base + LDVTLNR);
- /* h/v sync signals */
- iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR);
- iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12),
- par->base + LDHSYNR);
- /* AC modulation sig */
- iowrite16(par->pd->ldaclnr, par->base + LDACLNR);
-
- stride = (par->rot) ? vtln : hdcn;
- if (!gray)
- stride *= (bpp + 7) >> 3;
- else {
- if (bpp == 1)
- stride >>= 3;
- else if (bpp == 2)
- stride >>= 2;
- else if (bpp == 4)
- stride >>= 1;
- /* 6 bpp == 8 bpp */
- }
-
- /* if rotated, stride must be power of 2 */
- if (par->rot) {
- unsigned long bit = 1 << 31;
- while (bit) {
- if (stride & bit)
- break;
- bit >>= 1;
- }
- if (stride & ~bit)
- stride = bit << 1; /* not P-o-2, round up */
- }
- iowrite16(stride, par->base + LDLAOR);
-
- /* set display mem start address */
- sbase = (unsigned long)par->fbdma;
- if (par->rot)
- sbase += (hdcn - 1) * stride;
-
- iowrite32(sbase, par->base + LDSARU);
-
- /*
- * for DSTN need to set address for lower half.
- * I (mlau) don't know which address to set it to,
- * so I guessed at (stride * yres/2).
- */
- if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
- ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
-
- dev_dbg(info->dev, " ***** DSTN untested! *****\n");
-
- dstn_off = stride;
- if (par->rot)
- dstn_off *= hdcn >> 1;
- else
- dstn_off *= vdln >> 1;
-
- ldsarl = sbase + dstn_off;
- } else
- ldsarl = 0;
-
- iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
-
- info->fix.line_length = stride;
-
- sh7760fb_check_var(&info->var, info);
-
- sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
-
- dev_dbg(info->dev, "hdcn : %6d htcn : %6d\n", hdcn, htcn);
- dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
- dev_dbg(info->dev, "vdln : %6d vtln : %6d\n", vdln, vtln);
- dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
- dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
- (par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
- dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
- par->pd->ldpspr);
- dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
- dev_dbg(info->dev, "ldlaor: %ld\n", stride);
- dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
-
- return 0;
-}
-
-static const struct fb_ops sh7760fb_ops = {
- .owner = THIS_MODULE,
- .fb_blank = sh7760fb_blank,
- .fb_check_var = sh7760fb_check_var,
- .fb_setcolreg = sh7760_setcolreg,
- .fb_set_par = sh7760fb_set_par,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-static void sh7760fb_free_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
-
- if (!info->screen_base)
- return;
-
- dma_free_coherent(info->dev, info->screen_size,
- info->screen_base, par->fbdma);
-
- par->fbdma = 0;
- info->screen_base = NULL;
- info->screen_size = 0;
-}
-
-/* allocate the framebuffer memory. This memory must be in Area3,
- * (dictated by the DMA engine) and contiguous, at a 512 byte boundary.
- */
-static int sh7760fb_alloc_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- void *fbmem;
- unsigned long vram;
- int ret, bpp;
-
- if (info->screen_base)
- return 0;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret) {
- printk(KERN_ERR "colinfo\n");
- return ret;
- }
-
- /* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page
- max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */
-
- vram = info->var.xres * info->var.yres;
- if (info->var.grayscale) {
- if (bpp == 1)
- vram >>= 3;
- else if (bpp == 2)
- vram >>= 2;
- else if (bpp == 4)
- vram >>= 1;
- } else if (bpp > 8)
- vram *= 2;
- if ((vram < 1) || (vram > 1024 * 2048)) {
- dev_dbg(info->dev, "too much VRAM required. Check settings\n");
- return -ENODEV;
- }
-
- if (vram < PAGE_SIZE)
- vram = PAGE_SIZE;
-
- fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL);
-
- if (!fbmem)
- return -ENOMEM;
-
- if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) {
- sh7760fb_free_mem(info);
- dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is"
- "unusable for the LCDC\n", (unsigned long)par->fbdma);
- return -ENOMEM;
- }
-
- info->screen_base = fbmem;
- info->screen_size = vram;
- info->fix.smem_start = (unsigned long)info->screen_base;
- info->fix.smem_len = info->screen_size;
-
- return 0;
-}
-
-static int sh7760fb_probe(struct platform_device *pdev)
-{
- struct fb_info *info;
- struct resource *res;
- struct sh7760fb_par *par;
- int ret;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- par->dev = pdev;
-
- par->pd = pdev->dev.platform_data;
- if (!par->pd) {
- dev_dbg(info->dev, "no display setup data!\n");
- ret = -ENODEV;
- goto out_fb;
- }
-
- par->ioarea = request_mem_region(res->start,
- resource_size(res), pdev->name);
- if (!par->ioarea) {
- dev_err(&pdev->dev, "mmio area busy\n");
- ret = -EBUSY;
- goto out_fb;
- }
-
- par->base = ioremap(res->start, resource_size(res));
- if (!par->base) {
- dev_err(&pdev->dev, "cannot remap\n");
- ret = -ENODEV;
- goto out_res;
- }
-
- iowrite16(0, par->base + LDINTR); /* disable vsync irq */
- par->irq = platform_get_irq(pdev, 0);
- if (par->irq >= 0) {
- ret = request_irq(par->irq, sh7760fb_irq, 0,
- "sh7760-lcdc", &par->vsync);
- if (ret) {
- dev_err(&pdev->dev, "cannot grab IRQ\n");
- par->irq = -ENXIO;
- } else
- disable_irq_nosync(par->irq);
- }
-
- fb_videomode_to_var(&info->var, par->pd->def_mode);
-
- ret = sh7760fb_alloc_mem(info);
- if (ret) {
- dev_dbg(info->dev, "framebuffer memory allocation failed!\n");
- goto out_unmap;
- }
-
- info->pseudo_palette = par->pseudo_palette;
-
- /* fixup color register bitpositions. These are fixed by hardware */
- info->var.red.offset = 11;
- info->var.red.length = 5;
- info->var.red.msb_right = 0;
-
- info->var.green.offset = 5;
- info->var.green.length = 6;
- info->var.green.msb_right = 0;
-
- info->var.blue.offset = 0;
- info->var.blue.length = 5;
- info->var.blue.msb_right = 0;
-
- info->var.transp.offset = 0;
- info->var.transp.length = 0;
- info->var.transp.msb_right = 0;
-
- strcpy(info->fix.id, "sh7760-lcdc");
-
- /* set the DON2 bit now, before cmap allocation, as it will randomize
- * palette memory.
- */
- iowrite16(LDCNTR_DON2, par->base + LDCNTR);
- info->fbops = &sh7760fb_ops;
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret) {
- dev_dbg(info->dev, "Unable to allocate cmap memory\n");
- goto out_mem;
- }
-
- ret = register_framebuffer(info);
- if (ret < 0) {
- dev_dbg(info->dev, "cannot register fb!\n");
- goto out_cmap;
- }
- platform_set_drvdata(pdev, info);
-
- printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
- pdev->name,
- (unsigned long)par->fbdma,
- (unsigned long)(par->fbdma + info->screen_size - 1),
- info->screen_size >> 10);
-
- return 0;
-
-out_cmap:
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- fb_dealloc_cmap(&info->cmap);
-out_mem:
- sh7760fb_free_mem(info);
-out_unmap:
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
-out_res:
- release_mem_region(res->start, resource_size(res));
-out_fb:
- framebuffer_release(info);
- return ret;
-}
-
-static int sh7760fb_remove(struct platform_device *dev)
-{
- struct fb_info *info = platform_get_drvdata(dev);
- struct sh7760fb_par *par = info->par;
-
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- sh7760fb_free_mem(info);
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
- release_mem_region(par->ioarea->start, resource_size(par->ioarea));
- framebuffer_release(info);
-
- return 0;
-}
-
-static struct platform_driver sh7760_lcdc_driver = {
- .driver = {
- .name = "sh7760-lcdc",
- },
- .probe = sh7760fb_probe,
- .remove = sh7760fb_remove,
-};
-
-module_platform_driver(sh7760_lcdc_driver);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss");
-MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller");
-MODULE_LICENSE("GPL v2");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 19/22] fbdev: remove sh7760fb
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/video/fbdev/Kconfig | 17 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/sh7760fb.c | 587 ---------------------------------
3 files changed, 1 insertion(+), 604 deletions(-)
delete mode 100644 drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index b2bed599e6c6ea..cba0ba512a6ddb 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1861,7 +1861,7 @@ config FB_W100
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
@@ -2048,21 +2048,6 @@ config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
-config FB_SH7760
- bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
- depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
- || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the SH7760/SH7763/SH7720/SH7721 integrated
- (D)STN/TFT LCD Controller.
- Supports display resolutions up to 1024x1024 pixel, grayscale and
- color operation, with depths ranging from 1 bpp to 8 bpp monochrome
- and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
- panels <= 320 pixel horizontal resolution.
-
config FB_DA8XX
tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 7795c4126706fd..9941a30522b4b3 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
deleted file mode 100644
index 5978a892123226..00000000000000
--- a/drivers/video/fbdev/sh7760fb.c
+++ /dev/null
@@ -1,587 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH7760/SH7763 LCDC Framebuffer driver.
- *
- * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
- * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.rst!
- *
- * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
- * for his original source and testing!
- *
- * sh7760_setcolreg get from drivers/video/sh_mobile_lcdcfb.c
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/sh7760fb.h>
-
-struct sh7760fb_par {
- void __iomem *base;
- int irq;
-
- struct sh7760fb_platdata *pd; /* display information */
-
- dma_addr_t fbdma; /* physical address */
-
- int rot; /* rotation enabled? */
-
- u32 pseudo_palette[16];
-
- struct platform_device *dev;
- struct resource *ioarea;
- struct completion vsync; /* vsync irq event */
-};
-
-static irqreturn_t sh7760fb_irq(int irq, void *data)
-{
- struct completion *c = data;
-
- complete(c);
-
- return IRQ_HANDLED;
-}
-
-/* wait_for_lps - wait until power supply has reached a certain state. */
-static int wait_for_lps(struct sh7760fb_par *par, int val)
-{
- int i = 100;
- while (--i && ((ioread16(par->base + LDPMMR) & 3) != val))
- msleep(1);
-
- if (i <= 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-/* en/disable the LCDC */
-static int sh7760fb_blank(int blank, struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct sh7760fb_platdata *pd = par->pd;
- unsigned short cntr = ioread16(par->base + LDCNTR);
- unsigned short intr = ioread16(par->base + LDINTR);
- int lps;
-
- if (blank == FB_BLANK_UNBLANK) {
- intr |= VINT_START;
- cntr = LDCNTR_DON2 | LDCNTR_DON;
- lps = 3;
- } else {
- intr &= ~VINT_START;
- cntr = LDCNTR_DON2;
- lps = 0;
- }
-
- if (pd->blank)
- pd->blank(blank);
-
- iowrite16(intr, par->base + LDINTR);
- iowrite16(cntr, par->base + LDCNTR);
-
- return wait_for_lps(par, lps);
-}
-
-static int sh7760_setcolreg (u_int regno,
- u_int red, u_int green, u_int blue,
- u_int transp, struct fb_info *info)
-{
- u32 *palette = info->pseudo_palette;
-
- if (regno >= 16)
- return -EINVAL;
-
- /* only FB_VISUAL_TRUECOLOR supported */
-
- red >>= 16 - info->var.red.length;
- green >>= 16 - info->var.green.length;
- blue >>= 16 - info->var.blue.length;
- transp >>= 16 - info->var.transp.length;
-
- palette[regno] = (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset) |
- (transp << info->var.transp.offset);
-
- return 0;
-}
-
-static int sh7760fb_get_color_info(struct device *dev,
- u16 lddfr, int *bpp, int *gray)
-{
- int lbpp, lgray;
-
- lgray = lbpp = 0;
-
- switch (lddfr & LDDFR_COLOR_MASK) {
- case LDDFR_1BPP_MONO:
- lgray = 1;
- lbpp = 1;
- break;
- case LDDFR_2BPP_MONO:
- lgray = 1;
- lbpp = 2;
- break;
- case LDDFR_4BPP_MONO:
- lgray = 1;
- case LDDFR_4BPP:
- lbpp = 4;
- break;
- case LDDFR_6BPP_MONO:
- lgray = 1;
- case LDDFR_8BPP:
- lbpp = 8;
- break;
- case LDDFR_16BPP_RGB555:
- case LDDFR_16BPP_RGB565:
- lbpp = 16;
- lgray = 0;
- break;
- default:
- dev_dbg(dev, "unsupported LDDFR bit depth.\n");
- return -EINVAL;
- }
-
- if (bpp)
- *bpp = lbpp;
- if (gray)
- *gray = lgray;
-
- return 0;
-}
-
-static int sh7760fb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct fb_fix_screeninfo *fix = &info->fix;
- struct sh7760fb_par *par = info->par;
- int ret, bpp;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret)
- return ret;
-
- var->bits_per_pixel = bpp;
-
- if ((var->grayscale) && (var->bits_per_pixel == 1))
- fix->visual = FB_VISUAL_MONO10;
- else if (var->bits_per_pixel >= 15)
- fix->visual = FB_VISUAL_TRUECOLOR;
- else
- fix->visual = FB_VISUAL_PSEUDOCOLOR;
-
- /* TODO: add some more validation here */
- return 0;
-}
-
-/*
- * sh7760fb_set_par - set videomode.
- *
- * NOTE: The rotation, grayscale and DSTN codepaths are
- * totally untested!
- */
-static int sh7760fb_set_par(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- struct fb_videomode *vm = par->pd->def_mode;
- unsigned long sbase, dstn_off, ldsarl, stride;
- unsigned short hsynp, hsynw, htcn, hdcn;
- unsigned short vsynp, vsynw, vtln, vdln;
- unsigned short lddfr, ldmtr;
- int ret, bpp, gray;
-
- par->rot = par->pd->rotate;
-
- /* rotate only works with xres <= 320 */
- if (par->rot && (vm->xres > 320)) {
- dev_dbg(info->dev, "rotation disabled due to display size\n");
- par->rot = 0;
- }
-
- /* calculate LCDC reg vals from display parameters */
- hsynp = vm->right_margin + vm->xres;
- hsynw = vm->hsync_len;
- htcn = vm->left_margin + hsynp + hsynw;
- hdcn = vm->xres;
- vsynp = vm->lower_margin + vm->yres;
- vsynw = vm->vsync_len;
- vtln = vm->upper_margin + vsynp + vsynw;
- vdln = vm->yres;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray);
- if (ret)
- return ret;
-
- dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
- vdln, bpp, gray ? "grayscale" : "color",
- par->rot ? "rotated" : "normal");
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- lddfr = par->pd->lddfr | (1 << 8);
-#else
- lddfr = par->pd->lddfr & ~(1 << 8);
-#endif
-
- ldmtr = par->pd->ldmtr;
-
- if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT))
- ldmtr |= LDMTR_CL1POL;
- if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT))
- ldmtr |= LDMTR_FLMPOL;
-
- /* shut down LCDC before changing display parameters */
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
-
- iowrite16(par->pd->ldickr, par->base + LDICKR); /* pixclock */
- iowrite16(ldmtr, par->base + LDMTR); /* polarities */
- iowrite16(lddfr, par->base + LDDFR); /* color/depth */
- iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR); /* rotate */
- iowrite16(par->pd->ldpmmr, par->base + LDPMMR); /* Power Management */
- iowrite16(par->pd->ldpspr, par->base + LDPSPR); /* Power Supply Ctrl */
-
- /* display resolution */
- iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8),
- par->base + LDHCNR);
- iowrite16(vdln - 1, par->base + LDVDLNR);
- iowrite16(vtln - 1, par->base + LDVTLNR);
- /* h/v sync signals */
- iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR);
- iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12),
- par->base + LDHSYNR);
- /* AC modulation sig */
- iowrite16(par->pd->ldaclnr, par->base + LDACLNR);
-
- stride = (par->rot) ? vtln : hdcn;
- if (!gray)
- stride *= (bpp + 7) >> 3;
- else {
- if (bpp == 1)
- stride >>= 3;
- else if (bpp == 2)
- stride >>= 2;
- else if (bpp == 4)
- stride >>= 1;
- /* 6 bpp == 8 bpp */
- }
-
- /* if rotated, stride must be power of 2 */
- if (par->rot) {
- unsigned long bit = 1 << 31;
- while (bit) {
- if (stride & bit)
- break;
- bit >>= 1;
- }
- if (stride & ~bit)
- stride = bit << 1; /* not P-o-2, round up */
- }
- iowrite16(stride, par->base + LDLAOR);
-
- /* set display mem start address */
- sbase = (unsigned long)par->fbdma;
- if (par->rot)
- sbase += (hdcn - 1) * stride;
-
- iowrite32(sbase, par->base + LDSARU);
-
- /*
- * for DSTN need to set address for lower half.
- * I (mlau) don't know which address to set it to,
- * so I guessed at (stride * yres/2).
- */
- if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
- ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
-
- dev_dbg(info->dev, " ***** DSTN untested! *****\n");
-
- dstn_off = stride;
- if (par->rot)
- dstn_off *= hdcn >> 1;
- else
- dstn_off *= vdln >> 1;
-
- ldsarl = sbase + dstn_off;
- } else
- ldsarl = 0;
-
- iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
-
- info->fix.line_length = stride;
-
- sh7760fb_check_var(&info->var, info);
-
- sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
-
- dev_dbg(info->dev, "hdcn : %6d htcn : %6d\n", hdcn, htcn);
- dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
- dev_dbg(info->dev, "vdln : %6d vtln : %6d\n", vdln, vtln);
- dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
- dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
- (par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
- dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
- par->pd->ldpspr);
- dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
- dev_dbg(info->dev, "ldlaor: %ld\n", stride);
- dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
-
- return 0;
-}
-
-static const struct fb_ops sh7760fb_ops = {
- .owner = THIS_MODULE,
- .fb_blank = sh7760fb_blank,
- .fb_check_var = sh7760fb_check_var,
- .fb_setcolreg = sh7760_setcolreg,
- .fb_set_par = sh7760fb_set_par,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-static void sh7760fb_free_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
-
- if (!info->screen_base)
- return;
-
- dma_free_coherent(info->dev, info->screen_size,
- info->screen_base, par->fbdma);
-
- par->fbdma = 0;
- info->screen_base = NULL;
- info->screen_size = 0;
-}
-
-/* allocate the framebuffer memory. This memory must be in Area3,
- * (dictated by the DMA engine) and contiguous, at a 512 byte boundary.
- */
-static int sh7760fb_alloc_mem(struct fb_info *info)
-{
- struct sh7760fb_par *par = info->par;
- void *fbmem;
- unsigned long vram;
- int ret, bpp;
-
- if (info->screen_base)
- return 0;
-
- /* get color info from register value */
- ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
- if (ret) {
- printk(KERN_ERR "colinfo\n");
- return ret;
- }
-
- /* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page
- max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */
-
- vram = info->var.xres * info->var.yres;
- if (info->var.grayscale) {
- if (bpp == 1)
- vram >>= 3;
- else if (bpp == 2)
- vram >>= 2;
- else if (bpp == 4)
- vram >>= 1;
- } else if (bpp > 8)
- vram *= 2;
- if ((vram < 1) || (vram > 1024 * 2048)) {
- dev_dbg(info->dev, "too much VRAM required. Check settings\n");
- return -ENODEV;
- }
-
- if (vram < PAGE_SIZE)
- vram = PAGE_SIZE;
-
- fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL);
-
- if (!fbmem)
- return -ENOMEM;
-
- if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) {
- sh7760fb_free_mem(info);
- dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is"
- "unusable for the LCDC\n", (unsigned long)par->fbdma);
- return -ENOMEM;
- }
-
- info->screen_base = fbmem;
- info->screen_size = vram;
- info->fix.smem_start = (unsigned long)info->screen_base;
- info->fix.smem_len = info->screen_size;
-
- return 0;
-}
-
-static int sh7760fb_probe(struct platform_device *pdev)
-{
- struct fb_info *info;
- struct resource *res;
- struct sh7760fb_par *par;
- int ret;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(res == NULL)) {
- dev_err(&pdev->dev, "invalid resource\n");
- return -EINVAL;
- }
-
- info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- par->dev = pdev;
-
- par->pd = pdev->dev.platform_data;
- if (!par->pd) {
- dev_dbg(info->dev, "no display setup data!\n");
- ret = -ENODEV;
- goto out_fb;
- }
-
- par->ioarea = request_mem_region(res->start,
- resource_size(res), pdev->name);
- if (!par->ioarea) {
- dev_err(&pdev->dev, "mmio area busy\n");
- ret = -EBUSY;
- goto out_fb;
- }
-
- par->base = ioremap(res->start, resource_size(res));
- if (!par->base) {
- dev_err(&pdev->dev, "cannot remap\n");
- ret = -ENODEV;
- goto out_res;
- }
-
- iowrite16(0, par->base + LDINTR); /* disable vsync irq */
- par->irq = platform_get_irq(pdev, 0);
- if (par->irq >= 0) {
- ret = request_irq(par->irq, sh7760fb_irq, 0,
- "sh7760-lcdc", &par->vsync);
- if (ret) {
- dev_err(&pdev->dev, "cannot grab IRQ\n");
- par->irq = -ENXIO;
- } else
- disable_irq_nosync(par->irq);
- }
-
- fb_videomode_to_var(&info->var, par->pd->def_mode);
-
- ret = sh7760fb_alloc_mem(info);
- if (ret) {
- dev_dbg(info->dev, "framebuffer memory allocation failed!\n");
- goto out_unmap;
- }
-
- info->pseudo_palette = par->pseudo_palette;
-
- /* fixup color register bitpositions. These are fixed by hardware */
- info->var.red.offset = 11;
- info->var.red.length = 5;
- info->var.red.msb_right = 0;
-
- info->var.green.offset = 5;
- info->var.green.length = 6;
- info->var.green.msb_right = 0;
-
- info->var.blue.offset = 0;
- info->var.blue.length = 5;
- info->var.blue.msb_right = 0;
-
- info->var.transp.offset = 0;
- info->var.transp.length = 0;
- info->var.transp.msb_right = 0;
-
- strcpy(info->fix.id, "sh7760-lcdc");
-
- /* set the DON2 bit now, before cmap allocation, as it will randomize
- * palette memory.
- */
- iowrite16(LDCNTR_DON2, par->base + LDCNTR);
- info->fbops = &sh7760fb_ops;
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret) {
- dev_dbg(info->dev, "Unable to allocate cmap memory\n");
- goto out_mem;
- }
-
- ret = register_framebuffer(info);
- if (ret < 0) {
- dev_dbg(info->dev, "cannot register fb!\n");
- goto out_cmap;
- }
- platform_set_drvdata(pdev, info);
-
- printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
- pdev->name,
- (unsigned long)par->fbdma,
- (unsigned long)(par->fbdma + info->screen_size - 1),
- info->screen_size >> 10);
-
- return 0;
-
-out_cmap:
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- fb_dealloc_cmap(&info->cmap);
-out_mem:
- sh7760fb_free_mem(info);
-out_unmap:
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
-out_res:
- release_mem_region(res->start, resource_size(res));
-out_fb:
- framebuffer_release(info);
- return ret;
-}
-
-static int sh7760fb_remove(struct platform_device *dev)
-{
- struct fb_info *info = platform_get_drvdata(dev);
- struct sh7760fb_par *par = info->par;
-
- sh7760fb_blank(FB_BLANK_POWERDOWN, info);
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- sh7760fb_free_mem(info);
- if (par->irq >= 0)
- free_irq(par->irq, &par->vsync);
- iounmap(par->base);
- release_mem_region(par->ioarea->start, resource_size(par->ioarea));
- framebuffer_release(info);
-
- return 0;
-}
-
-static struct platform_driver sh7760_lcdc_driver = {
- .driver = {
- .name = "sh7760-lcdc",
- },
- .probe = sh7760fb_probe,
- .remove = sh7760fb_remove,
-};
-
-module_platform_driver(sh7760_lcdc_driver);
-
-MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss");
-MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller");
-MODULE_LICENSE("GPL v2");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 19/22] fbdev: remove sh7760fb
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:53 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:53 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, Jan 13, 2023 at 7:25 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -1861,7 +1861,7 @@ config FB_W100
> config FB_SH_MOBILE_LCDC
> tristate "SuperH Mobile LCDC framebuffer support"
> depends on FB && HAVE_CLK && HAS_IOMEM
> - depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
> + depends on ARCH_RENESAS || COMPILE_TEST
Nit: this part should be a separate patch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 19/22] fbdev: remove sh7760fb
@ 2023-01-13 8:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:53 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Christoph,
On Fri, Jan 13, 2023 at 7:25 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -1861,7 +1861,7 @@ config FB_W100
> config FB_SH_MOBILE_LCDC
> tristate "SuperH Mobile LCDC framebuffer support"
> depends on FB && HAVE_CLK && HAS_IOMEM
> - depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
> + depends on ARCH_RENESAS || COMPILE_TEST
Nit: this part should be a separate patch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: [PATCH 19/22] fbdev: remove sh7760fb
@ 2023-01-13 8:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:53 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph,
On Fri, Jan 13, 2023 at 7:25 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Thanks for your patch!
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -1861,7 +1861,7 @@ config FB_W100
> config FB_SH_MOBILE_LCDC
> tristate "SuperH Mobile LCDC framebuffer support"
> depends on FB && HAVE_CLK && HAS_IOMEM
> - depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
> + depends on ARCH_RENESAS || COMPILE_TEST
Nit: this part should be a separate patch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 20/22] media: remove sh_vou
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/media/platform/renesas/Kconfig | 9 -
drivers/media/platform/renesas/Makefile | 1 -
drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
3 files changed, 1385 deletions(-)
delete mode 100644 drivers/media/platform/renesas/sh_vou.c
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index 0231672a7e1c32..935b24b864380e 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -31,15 +31,6 @@ config VIDEO_RCAR_ISP
To compile this driver as a module, choose M here: the
module will be called rcar-isp.
-config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && I2C
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
-
source "drivers/media/platform/renesas/rcar-vin/Kconfig"
source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile
index 55854e8688870f..1ae7d825073df3 100644
--- a/drivers/media/platform/renesas/Makefile
+++ b/drivers/media/platform/renesas/Makefile
@@ -13,4 +13,3 @@ obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
-obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
diff --git a/drivers/media/platform/renesas/sh_vou.c b/drivers/media/platform/renesas/sh_vou.c
deleted file mode 100644
index ca4310e26c49ee..00000000000000
--- a/drivers/media/platform/renesas/sh_vou.c
+++ /dev/null
@@ -1,1375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH Video Output Unit (VOU) driver
- *
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/drv-intf/sh_vou.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-mediabus.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-
-/* Mirror addresses are not available for all registers */
-#define VOUER 0
-#define VOUCR 4
-#define VOUSTR 8
-#define VOUVCR 0xc
-#define VOUISR 0x10
-#define VOUBCR 0x14
-#define VOUDPR 0x18
-#define VOUDSR 0x1c
-#define VOUVPR 0x20
-#define VOUIR 0x24
-#define VOUSRR 0x28
-#define VOUMSR 0x2c
-#define VOUHIR 0x30
-#define VOUDFR 0x34
-#define VOUAD1R 0x38
-#define VOUAD2R 0x3c
-#define VOUAIR 0x40
-#define VOUSWR 0x44
-#define VOURCR 0x48
-#define VOURPR 0x50
-
-enum sh_vou_status {
- SH_VOU_IDLE,
- SH_VOU_INITIALISING,
- SH_VOU_RUNNING,
-};
-
-#define VOU_MIN_IMAGE_WIDTH 16
-#define VOU_MAX_IMAGE_WIDTH 720
-#define VOU_MIN_IMAGE_HEIGHT 16
-
-struct sh_vou_buffer {
- struct vb2_v4l2_buffer vb;
- struct list_head list;
-};
-
-static inline struct
-sh_vou_buffer *to_sh_vou_buffer(struct vb2_v4l2_buffer *vb2)
-{
- return container_of(vb2, struct sh_vou_buffer, vb);
-}
-
-struct sh_vou_device {
- struct v4l2_device v4l2_dev;
- struct video_device vdev;
- struct sh_vou_pdata *pdata;
- spinlock_t lock;
- void __iomem *base;
- /* State information */
- struct v4l2_pix_format pix;
- struct v4l2_rect rect;
- struct list_head buf_list;
- v4l2_std_id std;
- int pix_idx;
- struct vb2_queue queue;
- struct sh_vou_buffer *active;
- enum sh_vou_status status;
- unsigned sequence;
- struct mutex fop_lock;
-};
-
-/* Register access routines for sides A, B and mirror addresses */
-static void sh_vou_reg_a_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_ab_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
- __raw_writel(value, vou_dev->base + reg + 0x1000);
-}
-
-static void sh_vou_reg_m_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg + 0x2000);
-}
-
-static u32 sh_vou_reg_a_read(struct sh_vou_device *vou_dev, unsigned int reg)
-{
- return __raw_readl(vou_dev->base + reg);
-}
-
-static void sh_vou_reg_a_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- u32 old = __raw_readl(vou_dev->base + reg);
-
- value = (value & mask) | (old & ~mask);
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_b_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg + 0x1000, value, mask);
-}
-
-static void sh_vou_reg_ab_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg, value, mask);
- sh_vou_reg_b_set(vou_dev, reg, value, mask);
-}
-
-struct sh_vou_fmt {
- u32 pfmt;
- unsigned char bpp;
- unsigned char bpl;
- unsigned char rgb;
- unsigned char yf;
- unsigned char pkf;
-};
-
-/* Further pixel formats can be added */
-static struct sh_vou_fmt vou_fmt[] = {
- {
- .pfmt = V4L2_PIX_FMT_NV12,
- .bpp = 12,
- .bpl = 1,
- .yf = 0,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_NV16,
- .bpp = 16,
- .bpl = 1,
- .yf = 1,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB24,
- .bpp = 24,
- .bpl = 3,
- .pkf = 2,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565X,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
-};
-
-static void sh_vou_schedule_next(struct sh_vou_device *vou_dev,
- struct vb2_v4l2_buffer *vbuf)
-{
- dma_addr_t addr1, addr2;
-
- addr1 = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
- switch (vou_dev->pix.pixelformat) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- addr2 = addr1 + vou_dev->pix.width * vou_dev->pix.height;
- break;
- default:
- addr2 = 0;
- }
-
- sh_vou_reg_m_write(vou_dev, VOUAD1R, addr1);
- sh_vou_reg_m_write(vou_dev, VOUAD2R, addr2);
-}
-
-static void sh_vou_stream_config(struct sh_vou_device *vou_dev)
-{
- unsigned int row_coeff;
-#ifdef __LITTLE_ENDIAN
- u32 dataswap = 7;
-#else
- u32 dataswap = 0;
-#endif
-
- switch (vou_dev->pix.pixelformat) {
- default:
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- row_coeff = 1;
- break;
- case V4L2_PIX_FMT_RGB565:
- dataswap ^= 1;
- fallthrough;
- case V4L2_PIX_FMT_RGB565X:
- row_coeff = 2;
- break;
- case V4L2_PIX_FMT_RGB24:
- row_coeff = 3;
- break;
- }
-
- sh_vou_reg_a_write(vou_dev, VOUSWR, dataswap);
- sh_vou_reg_ab_write(vou_dev, VOUAIR, vou_dev->pix.width * row_coeff);
-}
-
-/* Locking: caller holds fop_lock mutex */
-static int sh_vou_queue_setup(struct vb2_queue *vq,
- unsigned int *nbuffers, unsigned int *nplanes,
- unsigned int sizes[], struct device *alloc_devs[])
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- int bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (*nplanes)
- return sizes[0] < pix->height * bytes_per_line ? -EINVAL : 0;
- *nplanes = 1;
- sizes[0] = pix->height * bytes_per_line;
- return 0;
-}
-
-static int sh_vou_buf_prepare(struct vb2_buffer *vb)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- unsigned bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
- unsigned size = pix->height * bytes_per_line;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (vb2_plane_size(vb, 0) < size) {
- /* User buffer too small */
- dev_warn(vou_dev->v4l2_dev.dev, "buffer too small (%lu < %u)\n",
- vb2_plane_size(vb, 0), size);
- return -EINVAL;
- }
-
- vb2_set_plane_payload(vb, 0, size);
- return 0;
-}
-
-/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
-static void sh_vou_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct sh_vou_buffer *shbuf = to_sh_vou_buffer(vbuf);
- unsigned long flags;
-
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_add_tail(&shbuf->list, &vou_dev->buf_list);
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static int sh_vou_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- int ret;
-
- vou_dev->sequence = 0;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf,
- VB2_BUF_STATE_QUEUED);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- return ret;
- }
-
- buf = list_entry(vou_dev->buf_list.next, struct sh_vou_buffer, list);
-
- vou_dev->active = buf;
-
- /* Start from side A: we use mirror addresses, so, set B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 1);
- dev_dbg(vou_dev->v4l2_dev.dev, "%s: first buffer status 0x%x\n",
- __func__, sh_vou_reg_a_read(vou_dev, VOUSTR));
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- buf = list_entry(buf->list.next, struct sh_vou_buffer, list);
-
- /* Second buffer - initialise register side B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 0);
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- /* Register side switching with frame VSYNC */
- sh_vou_reg_a_write(vou_dev, VOURCR, 5);
-
- sh_vou_stream_config(vou_dev);
- /* Enable End-of-Frame (VSYNC) interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0x10004);
-
- /* Two buffers on the queue - activate the hardware */
- vou_dev->status = SH_VOU_RUNNING;
- sh_vou_reg_a_write(vou_dev, VOUER, 0x107);
- return 0;
-}
-
-static void sh_vou_stop_streaming(struct vb2_queue *vq)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- unsigned long flags;
-
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 0);
- /* disable output */
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 1);
- /* ...but the current frame will complete */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x30000);
- msleep(50);
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static const struct vb2_ops sh_vou_qops = {
- .queue_setup = sh_vou_queue_setup,
- .buf_prepare = sh_vou_buf_prepare,
- .buf_queue = sh_vou_buf_queue,
- .start_streaming = sh_vou_start_streaming,
- .stop_streaming = sh_vou_stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-/* Video IOCTLs */
-static int sh_vou_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- strscpy(cap->card, "SuperH VOU", sizeof(cap->card));
- strscpy(cap->driver, "sh-vou", sizeof(cap->driver));
- strscpy(cap->bus_info, "platform:sh-vou", sizeof(cap->bus_info));
- return 0;
-}
-
-/* Enumerate formats, that the device can accept from the user */
-static int sh_vou_enum_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_fmtdesc *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (fmt->index >= ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->pixelformat = vou_fmt[fmt->index].pfmt;
-
- return 0;
-}
-
-static int sh_vou_g_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- fmt->fmt.pix = vou_dev->pix;
-
- return 0;
-}
-
-static const unsigned char vou_scale_h_num[] = {1, 9, 2, 9, 4};
-static const unsigned char vou_scale_h_den[] = {1, 8, 1, 4, 1};
-static const unsigned char vou_scale_h_fld[] = {0, 2, 1, 3};
-static const unsigned char vou_scale_v_num[] = {1, 2, 4};
-static const unsigned char vou_scale_v_den[] = {1, 1, 1};
-static const unsigned char vou_scale_v_fld[] = {0, 1};
-
-static void sh_vou_configure_geometry(struct sh_vou_device *vou_dev,
- int pix_idx, int w_idx, int h_idx)
-{
- struct sh_vou_fmt *fmt = vou_fmt + pix_idx;
- unsigned int black_left, black_top, width_max,
- frame_in_height, frame_out_height, frame_out_top;
- struct v4l2_rect *rect = &vou_dev->rect;
- struct v4l2_pix_format *pix = &vou_dev->pix;
- u32 vouvcr = 0, dsr_h, dsr_v;
-
- if (vou_dev->std & V4L2_STD_525_60) {
- width_max = 858;
- /* height_max = 262; */
- } else {
- width_max = 864;
- /* height_max = 312; */
- }
-
- frame_in_height = pix->height / 2;
- frame_out_height = rect->height / 2;
- frame_out_top = rect->top / 2;
-
- /*
- * Cropping scheme: max useful image is 720x480, and the total video
- * area is 858x525 (NTSC) or 864x625 (PAL). AK8813 / 8814 starts
- * sampling data beginning with fixed 276th (NTSC) / 288th (PAL) clock,
- * of which the first 33 / 25 clocks HSYNC must be held active. This
- * has to be configured in CR[HW]. 1 pixel equals 2 clock periods.
- * This gives CR[HW] = 16 / 12, VPR[HVP] = 138 / 144, which gives
- * exactly 858 - 138 = 864 - 144 = 720! We call the out-of-display area,
- * beyond DSR, specified on the left and top by the VPR register "black
- * pixels" and out-of-image area (DPR) "background pixels." We fix VPR
- * at 138 / 144 : 20, because that's the HSYNC timing, that our first
- * client requires, and that's exactly what leaves us 720 pixels for the
- * image; we leave VPR[VVP] at default 20 for now, because the client
- * doesn't seem to have any special requirements for it. Otherwise we
- * could also set it to max - 240 = 22 / 72. Thus VPR depends only on
- * the selected standard, and DPR and DSR are selected according to
- * cropping. Q: how does the client detect the first valid line? Does
- * HSYNC stay inactive during invalid (black) lines?
- */
- black_left = width_max - VOU_MAX_IMAGE_WIDTH;
- black_top = 20;
-
- dsr_h = rect->width + rect->left;
- dsr_v = frame_out_height + frame_out_top;
-
- dev_dbg(vou_dev->v4l2_dev.dev,
- "image %ux%u, black %u:%u, offset %u:%u, display %ux%u\n",
- pix->width, frame_in_height, black_left, black_top,
- rect->left, frame_out_top, dsr_h, dsr_v);
-
- /* VOUISR height - half of a frame height in frame mode */
- sh_vou_reg_ab_write(vou_dev, VOUISR, (pix->width << 16) | frame_in_height);
- sh_vou_reg_ab_write(vou_dev, VOUVPR, (black_left << 16) | black_top);
- sh_vou_reg_ab_write(vou_dev, VOUDPR, (rect->left << 16) | frame_out_top);
- sh_vou_reg_ab_write(vou_dev, VOUDSR, (dsr_h << 16) | dsr_v);
-
- /*
- * if necessary, we could set VOUHIR to
- * max(black_left + dsr_h, width_max) here
- */
-
- if (w_idx)
- vouvcr |= (1 << 15) | (vou_scale_h_fld[w_idx - 1] << 4);
- if (h_idx)
- vouvcr |= (1 << 14) | vou_scale_v_fld[h_idx - 1];
-
- dev_dbg(vou_dev->v4l2_dev.dev, "0x%08x: scaling 0x%x\n",
- fmt->pfmt, vouvcr);
-
- /* To produce a colour bar for testing set bit 23 of VOUVCR */
- sh_vou_reg_ab_write(vou_dev, VOUVCR, vouvcr);
- sh_vou_reg_ab_write(vou_dev, VOUDFR,
- fmt->pkf | (fmt->yf << 8) | (fmt->rgb << 16));
-}
-
-struct sh_vou_geometry {
- struct v4l2_rect output;
- unsigned int in_width;
- unsigned int in_height;
- int scale_idx_h;
- int scale_idx_v;
-};
-
-/*
- * Find input geometry, that we can use to produce output, closest to the
- * requested rectangle, using VOU scaling
- */
-static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- /* The compiler cannot know, that best and idx will indeed be set */
- unsigned int best_err = UINT_MAX, best = 0, img_height_max;
- int i, idx = 0;
-
- if (std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Image width must be a multiple of 4 */
- v4l_bound_align_image(&geo->in_width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &geo->in_height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- /* Select scales to come as close as possible to the output image */
- for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.width * vou_scale_h_den[i] /
- vou_scale_h_num[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_width);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_width = best;
- geo->scale_idx_h = idx;
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = ARRAY_SIZE(vou_scale_v_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.height * vou_scale_v_den[i] /
- vou_scale_v_num[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_height);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_height = best;
- geo->scale_idx_v = idx;
-}
-
-/*
- * Find output geometry, that we can produce, using VOU scaling, closest to
- * the requested rectangle
- */
-static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- unsigned int best_err = UINT_MAX, best = geo->in_width,
- width_max, height_max, img_height_max;
- int i, idx_h = 0, idx_v = 0;
-
- if (std & V4L2_STD_525_60) {
- width_max = 858;
- height_max = 262 * 2;
- img_height_max = 480;
- } else {
- width_max = 864;
- height_max = 312 * 2;
- img_height_max = 576;
- }
-
- /* Select scales to come as close as possible to the output image */
- for (i = 0; i < ARRAY_SIZE(vou_scale_h_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_width * vou_scale_h_num[i] /
- vou_scale_h_den[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.width);
- if (err < best_err) {
- best_err = err;
- idx_h = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.width = best;
- geo->scale_idx_h = idx_h;
- if (geo->output.left + best > width_max)
- geo->output.left = width_max - best;
-
- pr_debug("%s(): W %u * %u/%u = %u\n", __func__, geo->in_width,
- vou_scale_h_num[idx_h], vou_scale_h_den[idx_h], best);
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = 0; i < ARRAY_SIZE(vou_scale_v_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_height * vou_scale_v_num[i] /
- vou_scale_v_den[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.height);
- if (err < best_err) {
- best_err = err;
- idx_v = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.height = best;
- geo->scale_idx_v = idx_v;
- if (geo->output.top + best > height_max)
- geo->output.top = height_max - best;
-
- pr_debug("%s(): H %u * %u/%u = %u\n", __func__, geo->in_height,
- vou_scale_v_num[idx_v], vou_scale_v_den[idx_v], best);
-}
-
-static int sh_vou_try_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_pix_format *pix = &fmt->fmt.pix;
- unsigned int img_height_max;
- int pix_idx;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- pix->field = V4L2_FIELD_INTERLACED;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->ycbcr_enc = pix->quantization = 0;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- if (pix_idx == ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&pix->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &pix->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
- pix->bytesperline = pix->width * vou_fmt[pix_idx].bpl;
- pix->sizeimage = pix->height * ((pix->width * vou_fmt[pix_idx].bpp) >> 3);
-
- return 0;
-}
-
-static int sh_vou_set_fmt_vid_out(struct sh_vou_device *vou_dev,
- struct v4l2_pix_format *pix)
-{
- unsigned int img_height_max;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- struct v4l2_mbus_framefmt *mbfmt = &format.format;
- int pix_idx;
- int ret;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- geo.in_width = pix->width;
- geo.in_height = pix->height;
- geo.output = vou_dev->rect;
-
- vou_adjust_output(&geo, vou_dev->std);
-
- mbfmt->width = geo.output.width;
- mbfmt->height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__,
- geo.output.width, geo.output.height, mbfmt->width, mbfmt->height);
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Sanity checks */
- if ((unsigned)mbfmt->width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)mbfmt->height > img_height_max ||
- mbfmt->code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- if (mbfmt->width != geo.output.width ||
- mbfmt->height != geo.output.height) {
- geo.output.width = mbfmt->width;
- geo.output.height = mbfmt->height;
-
- vou_adjust_input(&geo, vou_dev->std);
- }
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u\n", __func__,
- pix->width, pix->height);
-
- vou_dev->pix_idx = pix_idx;
-
- vou_dev->pix = *pix;
-
- sh_vou_configure_geometry(vou_dev, pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret = sh_vou_try_fmt_vid_out(file, priv, fmt);
-
- if (ret)
- return ret;
- return sh_vou_set_fmt_vid_out(vou_dev, &fmt->fmt.pix);
-}
-
-static int sh_vou_enum_output(struct file *file, void *fh,
- struct v4l2_output *a)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (a->index)
- return -EINVAL;
- strscpy(a->name, "Video Out", sizeof(a->name));
- a->type = V4L2_OUTPUT_TYPE_ANALOG;
- a->std = vou_dev->vdev.tvnorms;
- return 0;
-}
-
-static int sh_vou_g_output(struct file *file, void *fh, unsigned int *i)
-{
- *i = 0;
- return 0;
-}
-
-static int sh_vou_s_output(struct file *file, void *fh, unsigned int i)
-{
- return i ? -EINVAL : 0;
-}
-
-static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt)
-{
- switch (bus_fmt) {
- default:
- pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n",
- __func__, bus_fmt);
- fallthrough;
- case SH_VOU_BUS_8BIT:
- return 1;
- case SH_VOU_BUS_16BIT:
- return 0;
- case SH_VOU_BUS_BT656:
- return 3;
- }
-}
-
-static int sh_vou_s_std(struct file *file, void *priv, v4l2_std_id std_id)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): 0x%llx\n", __func__, std_id);
-
- if (std_id == vou_dev->std)
- return 0;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video,
- s_std_output, std_id);
- /* Shall we continue, if the subdev doesn't support .s_std_output()? */
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
-
- vou_dev->rect.top = vou_dev->rect.left = 0;
- vou_dev->rect.width = VOU_MAX_IMAGE_WIDTH;
- if (std_id & V4L2_STD_525_60) {
- sh_vou_reg_ab_set(vou_dev, VOUCR,
- sh_vou_ntsc_mode(vou_dev->pdata->bus_fmt) << 29, 7 << 29);
- vou_dev->rect.height = 480;
- } else {
- sh_vou_reg_ab_set(vou_dev, VOUCR, 5 << 29, 7 << 29);
- vou_dev->rect.height = 576;
- }
-
- vou_dev->pix.width = vou_dev->rect.width;
- vou_dev->pix.height = vou_dev->rect.height;
- vou_dev->pix.bytesperline =
- vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpl;
- vou_dev->pix.sizeimage = vou_dev->pix.height *
- ((vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpp) >> 3);
- vou_dev->std = std_id;
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-static int sh_vou_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- *std = vou_dev->std;
-
- return 0;
-}
-
-static int sh_vou_log_status(struct file *file, void *priv)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- pr_info("VOUER: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUER));
- pr_info("VOUCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUCR));
- pr_info("VOUSTR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSTR));
- pr_info("VOUVCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVCR));
- pr_info("VOUISR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUISR));
- pr_info("VOUBCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUBCR));
- pr_info("VOUDPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDPR));
- pr_info("VOUDSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDSR));
- pr_info("VOUVPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVPR));
- pr_info("VOUIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUIR));
- pr_info("VOUSRR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSRR));
- pr_info("VOUMSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUMSR));
- pr_info("VOUHIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUHIR));
- pr_info("VOUDFR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDFR));
- pr_info("VOUAD1R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD1R));
- pr_info("VOUAD2R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD2R));
- pr_info("VOUAIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAIR));
- pr_info("VOUSWR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSWR));
- pr_info("VOURCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURCR));
- pr_info("VOURPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURPR));
- return 0;
-}
-
-static int sh_vou_g_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
- return -EINVAL;
- switch (sel->target) {
- case V4L2_SEL_TGT_COMPOSE:
- sel->r = vou_dev->rect;
- break;
- case V4L2_SEL_TGT_COMPOSE_DEFAULT:
- case V4L2_SEL_TGT_COMPOSE_BOUNDS:
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = VOU_MAX_IMAGE_WIDTH;
- if (vou_dev->std & V4L2_STD_525_60)
- sel->r.height = 480;
- else
- sel->r.height = 576;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* Assume a dull encoder, do all the work ourselves. */
-static int sh_vou_s_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct v4l2_rect *rect = &sel->r;
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_subdev_selection sd_sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_COMPOSE,
- };
- struct v4l2_pix_format *pix = &vou_dev->pix;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- unsigned int img_height_max;
- int ret;
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
- sel->target != V4L2_SEL_TGT_COMPOSE)
- return -EINVAL;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&rect->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 1,
- &rect->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH)
- rect->left = VOU_MAX_IMAGE_WIDTH - rect->width;
-
- if (rect->height + rect->top > img_height_max)
- rect->top = img_height_max - rect->height;
-
- geo.output = *rect;
- geo.in_width = pix->width;
- geo.in_height = pix->height;
-
- /* Configure the encoder one-to-one, position at 0, ignore errors */
- sd_sel.r.width = geo.output.width;
- sd_sel.r.height = geo.output.height;
- /*
- * We first issue a S_SELECTION, so that the subsequent S_FMT delivers the
- * final encoder configuration.
- */
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_selection, NULL, &sd_sel);
- format.format.width = geo.output.width;
- format.format.height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- /* Sanity checks */
- if ((unsigned)format.format.width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)format.format.height > img_height_max ||
- format.format.code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- geo.output.width = format.format.width;
- geo.output.height = format.format.height;
-
- /*
- * No down-scaling. According to the API, current call has precedence:
- * https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/crop.html#cropping-structures
- */
- vou_adjust_input(&geo, vou_dev->std);
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- sh_vou_configure_geometry(vou_dev, vou_dev->pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static irqreturn_t sh_vou_isr(int irq, void *dev_id)
-{
- struct sh_vou_device *vou_dev = dev_id;
- static unsigned long j;
- struct sh_vou_buffer *vb;
- static int cnt;
- u32 irq_status = sh_vou_reg_a_read(vou_dev, VOUIR), masked;
- u32 vou_status = sh_vou_reg_a_read(vou_dev, VOUSTR);
-
- if (!(irq_status & 0x300)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev, "IRQ status 0x%x!\n",
- irq_status);
- return IRQ_NONE;
- }
-
- spin_lock(&vou_dev->lock);
- if (!vou_dev->active || list_empty(&vou_dev->buf_list)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev,
- "IRQ without active buffer: %x!\n", irq_status);
- /* Just ack: buf_release will disable further interrupts */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x300);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- masked = ~(0x300 & irq_status) & irq_status & 0x30304;
- dev_dbg(vou_dev->v4l2_dev.dev,
- "IRQ status 0x%x -> 0x%x, VOU status 0x%x, cnt %d\n",
- irq_status, masked, vou_status, cnt);
-
- cnt++;
- /* side = vou_status & 0x10000; */
-
- /* Clear only set interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, masked);
-
- vb = vou_dev->active;
- if (list_is_singular(&vb->list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vb->vb);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- list_del(&vb->list);
-
- vb->vb.vb2_buf.timestamp = ktime_get_ns();
- vb->vb.sequence = vou_dev->sequence++;
- vb->vb.field = V4L2_FIELD_INTERLACED;
- vb2_buffer_done(&vb->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
- vou_dev->active = list_entry(vou_dev->buf_list.next,
- struct sh_vou_buffer, list);
-
- if (list_is_singular(&vou_dev->buf_list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vou_dev->active->vb);
- } else {
- struct sh_vou_buffer *new = list_entry(vou_dev->active->list.next,
- struct sh_vou_buffer, list);
- sh_vou_schedule_next(vou_dev, &new->vb);
- }
-
- spin_unlock(&vou_dev->lock);
-
- return IRQ_HANDLED;
-}
-
-static int sh_vou_hw_init(struct sh_vou_device *vou_dev)
-{
- struct sh_vou_pdata *pdata = vou_dev->pdata;
- u32 voucr = sh_vou_ntsc_mode(pdata->bus_fmt) << 29;
- int i = 100;
-
- /* Disable all IRQs */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0);
-
- /* Reset VOU interfaces - registers unaffected */
- sh_vou_reg_a_write(vou_dev, VOUSRR, 0x101);
- while (--i && (sh_vou_reg_a_read(vou_dev, VOUSRR) & 0x101))
- udelay(1);
-
- if (!i)
- return -ETIMEDOUT;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "Reset took %dus\n", 100 - i);
-
- if (pdata->flags & SH_VOU_PCLK_FALLING)
- voucr |= 1 << 28;
- if (pdata->flags & SH_VOU_HSYNC_LOW)
- voucr |= 1 << 27;
- if (pdata->flags & SH_VOU_VSYNC_LOW)
- voucr |= 1 << 26;
- sh_vou_reg_ab_set(vou_dev, VOUCR, voucr, 0xfc000000);
-
- /* Manual register side switching at first */
- sh_vou_reg_a_write(vou_dev, VOURCR, 4);
- /* Default - fixed HSYNC length, can be made configurable is required */
- sh_vou_reg_ab_write(vou_dev, VOUMSR, 0x800000);
-
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-/* File operations */
-static int sh_vou_open(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int err;
-
- if (mutex_lock_interruptible(&vou_dev->fop_lock))
- return -ERESTARTSYS;
-
- err = v4l2_fh_open(file);
- if (err)
- goto done_open;
- if (v4l2_fh_is_singular_file(file) &&
- vou_dev->status == SH_VOU_INITIALISING) {
- /* First open */
- err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
- if (err < 0) {
- v4l2_fh_release(file);
- goto done_open;
- }
- err = sh_vou_hw_init(vou_dev);
- if (err < 0) {
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- v4l2_fh_release(file);
- } else {
- vou_dev->status = SH_VOU_IDLE;
- }
- }
-done_open:
- mutex_unlock(&vou_dev->fop_lock);
- return err;
-}
-
-static int sh_vou_release(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- bool is_last;
-
- mutex_lock(&vou_dev->fop_lock);
- is_last = v4l2_fh_is_singular_file(file);
- _vb2_fop_release(file, NULL);
- if (is_last) {
- /* Last close */
- vou_dev->status = SH_VOU_INITIALISING;
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 0x101);
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- }
- mutex_unlock(&vou_dev->fop_lock);
- return 0;
-}
-
-/* sh_vou display ioctl operations */
-static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = {
- .vidioc_querycap = sh_vou_querycap,
- .vidioc_enum_fmt_vid_out = sh_vou_enum_fmt_vid_out,
- .vidioc_g_fmt_vid_out = sh_vou_g_fmt_vid_out,
- .vidioc_s_fmt_vid_out = sh_vou_s_fmt_vid_out,
- .vidioc_try_fmt_vid_out = sh_vou_try_fmt_vid_out,
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_create_bufs = vb2_ioctl_create_bufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- .vidioc_expbuf = vb2_ioctl_expbuf,
- .vidioc_g_output = sh_vou_g_output,
- .vidioc_s_output = sh_vou_s_output,
- .vidioc_enum_output = sh_vou_enum_output,
- .vidioc_s_std = sh_vou_s_std,
- .vidioc_g_std = sh_vou_g_std,
- .vidioc_g_selection = sh_vou_g_selection,
- .vidioc_s_selection = sh_vou_s_selection,
- .vidioc_log_status = sh_vou_log_status,
-};
-
-static const struct v4l2_file_operations sh_vou_fops = {
- .owner = THIS_MODULE,
- .open = sh_vou_open,
- .release = sh_vou_release,
- .unlocked_ioctl = video_ioctl2,
- .mmap = vb2_fop_mmap,
- .poll = vb2_fop_poll,
- .write = vb2_fop_write,
-};
-
-static const struct video_device sh_vou_video_template = {
- .name = "sh_vou",
- .fops = &sh_vou_fops,
- .ioctl_ops = &sh_vou_ioctl_ops,
- .tvnorms = V4L2_STD_525_60, /* PAL only supported in 8-bit non-bt656 mode */
- .vfl_dir = VFL_DIR_TX,
- .device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
-};
-
-static int sh_vou_probe(struct platform_device *pdev)
-{
- struct sh_vou_pdata *vou_pdata = pdev->dev.platform_data;
- struct v4l2_rect *rect;
- struct v4l2_pix_format *pix;
- struct i2c_adapter *i2c_adap;
- struct video_device *vdev;
- struct sh_vou_device *vou_dev;
- struct resource *reg_res;
- struct v4l2_subdev *subdev;
- struct vb2_queue *q;
- int irq, ret;
-
- reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
-
- if (!vou_pdata || !reg_res || irq <= 0) {
- dev_err(&pdev->dev, "Insufficient VOU platform information.\n");
- return -ENODEV;
- }
-
- vou_dev = devm_kzalloc(&pdev->dev, sizeof(*vou_dev), GFP_KERNEL);
- if (!vou_dev)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&vou_dev->buf_list);
- spin_lock_init(&vou_dev->lock);
- mutex_init(&vou_dev->fop_lock);
- vou_dev->pdata = vou_pdata;
- vou_dev->status = SH_VOU_INITIALISING;
- vou_dev->pix_idx = 1;
-
- rect = &vou_dev->rect;
- pix = &vou_dev->pix;
-
- /* Fill in defaults */
- vou_dev->std = V4L2_STD_NTSC_M;
- rect->left = 0;
- rect->top = 0;
- rect->width = VOU_MAX_IMAGE_WIDTH;
- rect->height = 480;
- pix->width = VOU_MAX_IMAGE_WIDTH;
- pix->height = 480;
- pix->pixelformat = V4L2_PIX_FMT_NV16;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->bytesperline = VOU_MAX_IMAGE_WIDTH;
- pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * 480;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
- vou_dev->base = devm_ioremap_resource(&pdev->dev, reg_res);
- if (IS_ERR(vou_dev->base))
- return PTR_ERR(vou_dev->base);
-
- ret = devm_request_irq(&pdev->dev, irq, sh_vou_isr, 0, "vou", vou_dev);
- if (ret < 0)
- return ret;
-
- ret = v4l2_device_register(&pdev->dev, &vou_dev->v4l2_dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "Error registering v4l2 device\n");
- return ret;
- }
-
- vdev = &vou_dev->vdev;
- *vdev = sh_vou_video_template;
- if (vou_pdata->bus_fmt == SH_VOU_BUS_8BIT)
- vdev->tvnorms |= V4L2_STD_PAL;
- vdev->v4l2_dev = &vou_dev->v4l2_dev;
- vdev->release = video_device_release_empty;
- vdev->lock = &vou_dev->fop_lock;
-
- video_set_drvdata(vdev, vou_dev);
-
- /* Initialize the vb2 queue */
- q = &vou_dev->queue;
- q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_WRITE;
- q->drv_priv = vou_dev;
- q->buf_struct_size = sizeof(struct sh_vou_buffer);
- q->ops = &sh_vou_qops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- q->min_buffers_needed = 2;
- q->lock = &vou_dev->fop_lock;
- q->dev = &pdev->dev;
- ret = vb2_queue_init(q);
- if (ret)
- goto ei2cgadap;
-
- vdev->queue = q;
- INIT_LIST_HEAD(&vou_dev->buf_list);
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- i2c_adap = i2c_get_adapter(vou_pdata->i2c_adap);
- if (!i2c_adap) {
- ret = -ENODEV;
- goto ei2cgadap;
- }
-
- ret = sh_vou_hw_init(vou_dev);
- if (ret < 0)
- goto ereset;
-
- subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- vou_pdata->board_info, NULL);
- if (!subdev) {
- ret = -ENOMEM;
- goto ei2cnd;
- }
-
- ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
- if (ret < 0)
- goto evregdev;
-
- return 0;
-
-evregdev:
-ei2cnd:
-ereset:
- i2c_put_adapter(i2c_adap);
-ei2cgadap:
- pm_runtime_disable(&pdev->dev);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return ret;
-}
-
-static int sh_vou_remove(struct platform_device *pdev)
-{
- struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
- struct sh_vou_device *vou_dev = container_of(v4l2_dev,
- struct sh_vou_device, v4l2_dev);
- struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next,
- struct v4l2_subdev, list);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- pm_runtime_disable(&pdev->dev);
- video_unregister_device(&vou_dev->vdev);
- i2c_put_adapter(client->adapter);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return 0;
-}
-
-static struct platform_driver sh_vou = {
- .remove = sh_vou_remove,
- .driver = {
- .name = "sh-vou",
- },
-};
-
-module_platform_driver_probe(sh_vou, sh_vou_probe);
-
-MODULE_DESCRIPTION("SuperH VOU driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1.0");
-MODULE_ALIAS("platform:sh-vou");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/media/platform/renesas/Kconfig | 9 -
drivers/media/platform/renesas/Makefile | 1 -
drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
3 files changed, 1385 deletions(-)
delete mode 100644 drivers/media/platform/renesas/sh_vou.c
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index 0231672a7e1c32..935b24b864380e 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -31,15 +31,6 @@ config VIDEO_RCAR_ISP
To compile this driver as a module, choose M here: the
module will be called rcar-isp.
-config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && I2C
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
-
source "drivers/media/platform/renesas/rcar-vin/Kconfig"
source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile
index 55854e8688870f..1ae7d825073df3 100644
--- a/drivers/media/platform/renesas/Makefile
+++ b/drivers/media/platform/renesas/Makefile
@@ -13,4 +13,3 @@ obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
-obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
diff --git a/drivers/media/platform/renesas/sh_vou.c b/drivers/media/platform/renesas/sh_vou.c
deleted file mode 100644
index ca4310e26c49ee..00000000000000
--- a/drivers/media/platform/renesas/sh_vou.c
+++ /dev/null
@@ -1,1375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH Video Output Unit (VOU) driver
- *
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/drv-intf/sh_vou.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-mediabus.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-
-/* Mirror addresses are not available for all registers */
-#define VOUER 0
-#define VOUCR 4
-#define VOUSTR 8
-#define VOUVCR 0xc
-#define VOUISR 0x10
-#define VOUBCR 0x14
-#define VOUDPR 0x18
-#define VOUDSR 0x1c
-#define VOUVPR 0x20
-#define VOUIR 0x24
-#define VOUSRR 0x28
-#define VOUMSR 0x2c
-#define VOUHIR 0x30
-#define VOUDFR 0x34
-#define VOUAD1R 0x38
-#define VOUAD2R 0x3c
-#define VOUAIR 0x40
-#define VOUSWR 0x44
-#define VOURCR 0x48
-#define VOURPR 0x50
-
-enum sh_vou_status {
- SH_VOU_IDLE,
- SH_VOU_INITIALISING,
- SH_VOU_RUNNING,
-};
-
-#define VOU_MIN_IMAGE_WIDTH 16
-#define VOU_MAX_IMAGE_WIDTH 720
-#define VOU_MIN_IMAGE_HEIGHT 16
-
-struct sh_vou_buffer {
- struct vb2_v4l2_buffer vb;
- struct list_head list;
-};
-
-static inline struct
-sh_vou_buffer *to_sh_vou_buffer(struct vb2_v4l2_buffer *vb2)
-{
- return container_of(vb2, struct sh_vou_buffer, vb);
-}
-
-struct sh_vou_device {
- struct v4l2_device v4l2_dev;
- struct video_device vdev;
- struct sh_vou_pdata *pdata;
- spinlock_t lock;
- void __iomem *base;
- /* State information */
- struct v4l2_pix_format pix;
- struct v4l2_rect rect;
- struct list_head buf_list;
- v4l2_std_id std;
- int pix_idx;
- struct vb2_queue queue;
- struct sh_vou_buffer *active;
- enum sh_vou_status status;
- unsigned sequence;
- struct mutex fop_lock;
-};
-
-/* Register access routines for sides A, B and mirror addresses */
-static void sh_vou_reg_a_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_ab_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
- __raw_writel(value, vou_dev->base + reg + 0x1000);
-}
-
-static void sh_vou_reg_m_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg + 0x2000);
-}
-
-static u32 sh_vou_reg_a_read(struct sh_vou_device *vou_dev, unsigned int reg)
-{
- return __raw_readl(vou_dev->base + reg);
-}
-
-static void sh_vou_reg_a_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- u32 old = __raw_readl(vou_dev->base + reg);
-
- value = (value & mask) | (old & ~mask);
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_b_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg + 0x1000, value, mask);
-}
-
-static void sh_vou_reg_ab_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg, value, mask);
- sh_vou_reg_b_set(vou_dev, reg, value, mask);
-}
-
-struct sh_vou_fmt {
- u32 pfmt;
- unsigned char bpp;
- unsigned char bpl;
- unsigned char rgb;
- unsigned char yf;
- unsigned char pkf;
-};
-
-/* Further pixel formats can be added */
-static struct sh_vou_fmt vou_fmt[] = {
- {
- .pfmt = V4L2_PIX_FMT_NV12,
- .bpp = 12,
- .bpl = 1,
- .yf = 0,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_NV16,
- .bpp = 16,
- .bpl = 1,
- .yf = 1,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB24,
- .bpp = 24,
- .bpl = 3,
- .pkf = 2,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565X,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
-};
-
-static void sh_vou_schedule_next(struct sh_vou_device *vou_dev,
- struct vb2_v4l2_buffer *vbuf)
-{
- dma_addr_t addr1, addr2;
-
- addr1 = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
- switch (vou_dev->pix.pixelformat) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- addr2 = addr1 + vou_dev->pix.width * vou_dev->pix.height;
- break;
- default:
- addr2 = 0;
- }
-
- sh_vou_reg_m_write(vou_dev, VOUAD1R, addr1);
- sh_vou_reg_m_write(vou_dev, VOUAD2R, addr2);
-}
-
-static void sh_vou_stream_config(struct sh_vou_device *vou_dev)
-{
- unsigned int row_coeff;
-#ifdef __LITTLE_ENDIAN
- u32 dataswap = 7;
-#else
- u32 dataswap = 0;
-#endif
-
- switch (vou_dev->pix.pixelformat) {
- default:
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- row_coeff = 1;
- break;
- case V4L2_PIX_FMT_RGB565:
- dataswap ^= 1;
- fallthrough;
- case V4L2_PIX_FMT_RGB565X:
- row_coeff = 2;
- break;
- case V4L2_PIX_FMT_RGB24:
- row_coeff = 3;
- break;
- }
-
- sh_vou_reg_a_write(vou_dev, VOUSWR, dataswap);
- sh_vou_reg_ab_write(vou_dev, VOUAIR, vou_dev->pix.width * row_coeff);
-}
-
-/* Locking: caller holds fop_lock mutex */
-static int sh_vou_queue_setup(struct vb2_queue *vq,
- unsigned int *nbuffers, unsigned int *nplanes,
- unsigned int sizes[], struct device *alloc_devs[])
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- int bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (*nplanes)
- return sizes[0] < pix->height * bytes_per_line ? -EINVAL : 0;
- *nplanes = 1;
- sizes[0] = pix->height * bytes_per_line;
- return 0;
-}
-
-static int sh_vou_buf_prepare(struct vb2_buffer *vb)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- unsigned bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
- unsigned size = pix->height * bytes_per_line;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (vb2_plane_size(vb, 0) < size) {
- /* User buffer too small */
- dev_warn(vou_dev->v4l2_dev.dev, "buffer too small (%lu < %u)\n",
- vb2_plane_size(vb, 0), size);
- return -EINVAL;
- }
-
- vb2_set_plane_payload(vb, 0, size);
- return 0;
-}
-
-/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
-static void sh_vou_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct sh_vou_buffer *shbuf = to_sh_vou_buffer(vbuf);
- unsigned long flags;
-
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_add_tail(&shbuf->list, &vou_dev->buf_list);
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static int sh_vou_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- int ret;
-
- vou_dev->sequence = 0;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf,
- VB2_BUF_STATE_QUEUED);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- return ret;
- }
-
- buf = list_entry(vou_dev->buf_list.next, struct sh_vou_buffer, list);
-
- vou_dev->active = buf;
-
- /* Start from side A: we use mirror addresses, so, set B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 1);
- dev_dbg(vou_dev->v4l2_dev.dev, "%s: first buffer status 0x%x\n",
- __func__, sh_vou_reg_a_read(vou_dev, VOUSTR));
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- buf = list_entry(buf->list.next, struct sh_vou_buffer, list);
-
- /* Second buffer - initialise register side B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 0);
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- /* Register side switching with frame VSYNC */
- sh_vou_reg_a_write(vou_dev, VOURCR, 5);
-
- sh_vou_stream_config(vou_dev);
- /* Enable End-of-Frame (VSYNC) interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0x10004);
-
- /* Two buffers on the queue - activate the hardware */
- vou_dev->status = SH_VOU_RUNNING;
- sh_vou_reg_a_write(vou_dev, VOUER, 0x107);
- return 0;
-}
-
-static void sh_vou_stop_streaming(struct vb2_queue *vq)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- unsigned long flags;
-
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 0);
- /* disable output */
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 1);
- /* ...but the current frame will complete */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x30000);
- msleep(50);
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static const struct vb2_ops sh_vou_qops = {
- .queue_setup = sh_vou_queue_setup,
- .buf_prepare = sh_vou_buf_prepare,
- .buf_queue = sh_vou_buf_queue,
- .start_streaming = sh_vou_start_streaming,
- .stop_streaming = sh_vou_stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-/* Video IOCTLs */
-static int sh_vou_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- strscpy(cap->card, "SuperH VOU", sizeof(cap->card));
- strscpy(cap->driver, "sh-vou", sizeof(cap->driver));
- strscpy(cap->bus_info, "platform:sh-vou", sizeof(cap->bus_info));
- return 0;
-}
-
-/* Enumerate formats, that the device can accept from the user */
-static int sh_vou_enum_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_fmtdesc *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (fmt->index >= ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->pixelformat = vou_fmt[fmt->index].pfmt;
-
- return 0;
-}
-
-static int sh_vou_g_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- fmt->fmt.pix = vou_dev->pix;
-
- return 0;
-}
-
-static const unsigned char vou_scale_h_num[] = {1, 9, 2, 9, 4};
-static const unsigned char vou_scale_h_den[] = {1, 8, 1, 4, 1};
-static const unsigned char vou_scale_h_fld[] = {0, 2, 1, 3};
-static const unsigned char vou_scale_v_num[] = {1, 2, 4};
-static const unsigned char vou_scale_v_den[] = {1, 1, 1};
-static const unsigned char vou_scale_v_fld[] = {0, 1};
-
-static void sh_vou_configure_geometry(struct sh_vou_device *vou_dev,
- int pix_idx, int w_idx, int h_idx)
-{
- struct sh_vou_fmt *fmt = vou_fmt + pix_idx;
- unsigned int black_left, black_top, width_max,
- frame_in_height, frame_out_height, frame_out_top;
- struct v4l2_rect *rect = &vou_dev->rect;
- struct v4l2_pix_format *pix = &vou_dev->pix;
- u32 vouvcr = 0, dsr_h, dsr_v;
-
- if (vou_dev->std & V4L2_STD_525_60) {
- width_max = 858;
- /* height_max = 262; */
- } else {
- width_max = 864;
- /* height_max = 312; */
- }
-
- frame_in_height = pix->height / 2;
- frame_out_height = rect->height / 2;
- frame_out_top = rect->top / 2;
-
- /*
- * Cropping scheme: max useful image is 720x480, and the total video
- * area is 858x525 (NTSC) or 864x625 (PAL). AK8813 / 8814 starts
- * sampling data beginning with fixed 276th (NTSC) / 288th (PAL) clock,
- * of which the first 33 / 25 clocks HSYNC must be held active. This
- * has to be configured in CR[HW]. 1 pixel equals 2 clock periods.
- * This gives CR[HW] = 16 / 12, VPR[HVP] = 138 / 144, which gives
- * exactly 858 - 138 = 864 - 144 = 720! We call the out-of-display area,
- * beyond DSR, specified on the left and top by the VPR register "black
- * pixels" and out-of-image area (DPR) "background pixels." We fix VPR
- * at 138 / 144 : 20, because that's the HSYNC timing, that our first
- * client requires, and that's exactly what leaves us 720 pixels for the
- * image; we leave VPR[VVP] at default 20 for now, because the client
- * doesn't seem to have any special requirements for it. Otherwise we
- * could also set it to max - 240 = 22 / 72. Thus VPR depends only on
- * the selected standard, and DPR and DSR are selected according to
- * cropping. Q: how does the client detect the first valid line? Does
- * HSYNC stay inactive during invalid (black) lines?
- */
- black_left = width_max - VOU_MAX_IMAGE_WIDTH;
- black_top = 20;
-
- dsr_h = rect->width + rect->left;
- dsr_v = frame_out_height + frame_out_top;
-
- dev_dbg(vou_dev->v4l2_dev.dev,
- "image %ux%u, black %u:%u, offset %u:%u, display %ux%u\n",
- pix->width, frame_in_height, black_left, black_top,
- rect->left, frame_out_top, dsr_h, dsr_v);
-
- /* VOUISR height - half of a frame height in frame mode */
- sh_vou_reg_ab_write(vou_dev, VOUISR, (pix->width << 16) | frame_in_height);
- sh_vou_reg_ab_write(vou_dev, VOUVPR, (black_left << 16) | black_top);
- sh_vou_reg_ab_write(vou_dev, VOUDPR, (rect->left << 16) | frame_out_top);
- sh_vou_reg_ab_write(vou_dev, VOUDSR, (dsr_h << 16) | dsr_v);
-
- /*
- * if necessary, we could set VOUHIR to
- * max(black_left + dsr_h, width_max) here
- */
-
- if (w_idx)
- vouvcr |= (1 << 15) | (vou_scale_h_fld[w_idx - 1] << 4);
- if (h_idx)
- vouvcr |= (1 << 14) | vou_scale_v_fld[h_idx - 1];
-
- dev_dbg(vou_dev->v4l2_dev.dev, "0x%08x: scaling 0x%x\n",
- fmt->pfmt, vouvcr);
-
- /* To produce a colour bar for testing set bit 23 of VOUVCR */
- sh_vou_reg_ab_write(vou_dev, VOUVCR, vouvcr);
- sh_vou_reg_ab_write(vou_dev, VOUDFR,
- fmt->pkf | (fmt->yf << 8) | (fmt->rgb << 16));
-}
-
-struct sh_vou_geometry {
- struct v4l2_rect output;
- unsigned int in_width;
- unsigned int in_height;
- int scale_idx_h;
- int scale_idx_v;
-};
-
-/*
- * Find input geometry, that we can use to produce output, closest to the
- * requested rectangle, using VOU scaling
- */
-static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- /* The compiler cannot know, that best and idx will indeed be set */
- unsigned int best_err = UINT_MAX, best = 0, img_height_max;
- int i, idx = 0;
-
- if (std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Image width must be a multiple of 4 */
- v4l_bound_align_image(&geo->in_width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &geo->in_height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- /* Select scales to come as close as possible to the output image */
- for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.width * vou_scale_h_den[i] /
- vou_scale_h_num[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_width);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_width = best;
- geo->scale_idx_h = idx;
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = ARRAY_SIZE(vou_scale_v_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.height * vou_scale_v_den[i] /
- vou_scale_v_num[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_height);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_height = best;
- geo->scale_idx_v = idx;
-}
-
-/*
- * Find output geometry, that we can produce, using VOU scaling, closest to
- * the requested rectangle
- */
-static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- unsigned int best_err = UINT_MAX, best = geo->in_width,
- width_max, height_max, img_height_max;
- int i, idx_h = 0, idx_v = 0;
-
- if (std & V4L2_STD_525_60) {
- width_max = 858;
- height_max = 262 * 2;
- img_height_max = 480;
- } else {
- width_max = 864;
- height_max = 312 * 2;
- img_height_max = 576;
- }
-
- /* Select scales to come as close as possible to the output image */
- for (i = 0; i < ARRAY_SIZE(vou_scale_h_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_width * vou_scale_h_num[i] /
- vou_scale_h_den[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.width);
- if (err < best_err) {
- best_err = err;
- idx_h = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.width = best;
- geo->scale_idx_h = idx_h;
- if (geo->output.left + best > width_max)
- geo->output.left = width_max - best;
-
- pr_debug("%s(): W %u * %u/%u = %u\n", __func__, geo->in_width,
- vou_scale_h_num[idx_h], vou_scale_h_den[idx_h], best);
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = 0; i < ARRAY_SIZE(vou_scale_v_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_height * vou_scale_v_num[i] /
- vou_scale_v_den[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.height);
- if (err < best_err) {
- best_err = err;
- idx_v = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.height = best;
- geo->scale_idx_v = idx_v;
- if (geo->output.top + best > height_max)
- geo->output.top = height_max - best;
-
- pr_debug("%s(): H %u * %u/%u = %u\n", __func__, geo->in_height,
- vou_scale_v_num[idx_v], vou_scale_v_den[idx_v], best);
-}
-
-static int sh_vou_try_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_pix_format *pix = &fmt->fmt.pix;
- unsigned int img_height_max;
- int pix_idx;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- pix->field = V4L2_FIELD_INTERLACED;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->ycbcr_enc = pix->quantization = 0;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- if (pix_idx == ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&pix->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &pix->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
- pix->bytesperline = pix->width * vou_fmt[pix_idx].bpl;
- pix->sizeimage = pix->height * ((pix->width * vou_fmt[pix_idx].bpp) >> 3);
-
- return 0;
-}
-
-static int sh_vou_set_fmt_vid_out(struct sh_vou_device *vou_dev,
- struct v4l2_pix_format *pix)
-{
- unsigned int img_height_max;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- struct v4l2_mbus_framefmt *mbfmt = &format.format;
- int pix_idx;
- int ret;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- geo.in_width = pix->width;
- geo.in_height = pix->height;
- geo.output = vou_dev->rect;
-
- vou_adjust_output(&geo, vou_dev->std);
-
- mbfmt->width = geo.output.width;
- mbfmt->height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__,
- geo.output.width, geo.output.height, mbfmt->width, mbfmt->height);
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Sanity checks */
- if ((unsigned)mbfmt->width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)mbfmt->height > img_height_max ||
- mbfmt->code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- if (mbfmt->width != geo.output.width ||
- mbfmt->height != geo.output.height) {
- geo.output.width = mbfmt->width;
- geo.output.height = mbfmt->height;
-
- vou_adjust_input(&geo, vou_dev->std);
- }
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u\n", __func__,
- pix->width, pix->height);
-
- vou_dev->pix_idx = pix_idx;
-
- vou_dev->pix = *pix;
-
- sh_vou_configure_geometry(vou_dev, pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret = sh_vou_try_fmt_vid_out(file, priv, fmt);
-
- if (ret)
- return ret;
- return sh_vou_set_fmt_vid_out(vou_dev, &fmt->fmt.pix);
-}
-
-static int sh_vou_enum_output(struct file *file, void *fh,
- struct v4l2_output *a)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (a->index)
- return -EINVAL;
- strscpy(a->name, "Video Out", sizeof(a->name));
- a->type = V4L2_OUTPUT_TYPE_ANALOG;
- a->std = vou_dev->vdev.tvnorms;
- return 0;
-}
-
-static int sh_vou_g_output(struct file *file, void *fh, unsigned int *i)
-{
- *i = 0;
- return 0;
-}
-
-static int sh_vou_s_output(struct file *file, void *fh, unsigned int i)
-{
- return i ? -EINVAL : 0;
-}
-
-static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt)
-{
- switch (bus_fmt) {
- default:
- pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n",
- __func__, bus_fmt);
- fallthrough;
- case SH_VOU_BUS_8BIT:
- return 1;
- case SH_VOU_BUS_16BIT:
- return 0;
- case SH_VOU_BUS_BT656:
- return 3;
- }
-}
-
-static int sh_vou_s_std(struct file *file, void *priv, v4l2_std_id std_id)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): 0x%llx\n", __func__, std_id);
-
- if (std_id == vou_dev->std)
- return 0;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video,
- s_std_output, std_id);
- /* Shall we continue, if the subdev doesn't support .s_std_output()? */
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
-
- vou_dev->rect.top = vou_dev->rect.left = 0;
- vou_dev->rect.width = VOU_MAX_IMAGE_WIDTH;
- if (std_id & V4L2_STD_525_60) {
- sh_vou_reg_ab_set(vou_dev, VOUCR,
- sh_vou_ntsc_mode(vou_dev->pdata->bus_fmt) << 29, 7 << 29);
- vou_dev->rect.height = 480;
- } else {
- sh_vou_reg_ab_set(vou_dev, VOUCR, 5 << 29, 7 << 29);
- vou_dev->rect.height = 576;
- }
-
- vou_dev->pix.width = vou_dev->rect.width;
- vou_dev->pix.height = vou_dev->rect.height;
- vou_dev->pix.bytesperline =
- vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpl;
- vou_dev->pix.sizeimage = vou_dev->pix.height *
- ((vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpp) >> 3);
- vou_dev->std = std_id;
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-static int sh_vou_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- *std = vou_dev->std;
-
- return 0;
-}
-
-static int sh_vou_log_status(struct file *file, void *priv)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- pr_info("VOUER: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUER));
- pr_info("VOUCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUCR));
- pr_info("VOUSTR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSTR));
- pr_info("VOUVCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVCR));
- pr_info("VOUISR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUISR));
- pr_info("VOUBCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUBCR));
- pr_info("VOUDPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDPR));
- pr_info("VOUDSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDSR));
- pr_info("VOUVPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVPR));
- pr_info("VOUIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUIR));
- pr_info("VOUSRR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSRR));
- pr_info("VOUMSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUMSR));
- pr_info("VOUHIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUHIR));
- pr_info("VOUDFR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDFR));
- pr_info("VOUAD1R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD1R));
- pr_info("VOUAD2R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD2R));
- pr_info("VOUAIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAIR));
- pr_info("VOUSWR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSWR));
- pr_info("VOURCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURCR));
- pr_info("VOURPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURPR));
- return 0;
-}
-
-static int sh_vou_g_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
- return -EINVAL;
- switch (sel->target) {
- case V4L2_SEL_TGT_COMPOSE:
- sel->r = vou_dev->rect;
- break;
- case V4L2_SEL_TGT_COMPOSE_DEFAULT:
- case V4L2_SEL_TGT_COMPOSE_BOUNDS:
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = VOU_MAX_IMAGE_WIDTH;
- if (vou_dev->std & V4L2_STD_525_60)
- sel->r.height = 480;
- else
- sel->r.height = 576;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* Assume a dull encoder, do all the work ourselves. */
-static int sh_vou_s_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct v4l2_rect *rect = &sel->r;
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_subdev_selection sd_sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_COMPOSE,
- };
- struct v4l2_pix_format *pix = &vou_dev->pix;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- unsigned int img_height_max;
- int ret;
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
- sel->target != V4L2_SEL_TGT_COMPOSE)
- return -EINVAL;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&rect->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 1,
- &rect->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH)
- rect->left = VOU_MAX_IMAGE_WIDTH - rect->width;
-
- if (rect->height + rect->top > img_height_max)
- rect->top = img_height_max - rect->height;
-
- geo.output = *rect;
- geo.in_width = pix->width;
- geo.in_height = pix->height;
-
- /* Configure the encoder one-to-one, position at 0, ignore errors */
- sd_sel.r.width = geo.output.width;
- sd_sel.r.height = geo.output.height;
- /*
- * We first issue a S_SELECTION, so that the subsequent S_FMT delivers the
- * final encoder configuration.
- */
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_selection, NULL, &sd_sel);
- format.format.width = geo.output.width;
- format.format.height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- /* Sanity checks */
- if ((unsigned)format.format.width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)format.format.height > img_height_max ||
- format.format.code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- geo.output.width = format.format.width;
- geo.output.height = format.format.height;
-
- /*
- * No down-scaling. According to the API, current call has precedence:
- * https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/crop.html#cropping-structures
- */
- vou_adjust_input(&geo, vou_dev->std);
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- sh_vou_configure_geometry(vou_dev, vou_dev->pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static irqreturn_t sh_vou_isr(int irq, void *dev_id)
-{
- struct sh_vou_device *vou_dev = dev_id;
- static unsigned long j;
- struct sh_vou_buffer *vb;
- static int cnt;
- u32 irq_status = sh_vou_reg_a_read(vou_dev, VOUIR), masked;
- u32 vou_status = sh_vou_reg_a_read(vou_dev, VOUSTR);
-
- if (!(irq_status & 0x300)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev, "IRQ status 0x%x!\n",
- irq_status);
- return IRQ_NONE;
- }
-
- spin_lock(&vou_dev->lock);
- if (!vou_dev->active || list_empty(&vou_dev->buf_list)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev,
- "IRQ without active buffer: %x!\n", irq_status);
- /* Just ack: buf_release will disable further interrupts */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x300);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- masked = ~(0x300 & irq_status) & irq_status & 0x30304;
- dev_dbg(vou_dev->v4l2_dev.dev,
- "IRQ status 0x%x -> 0x%x, VOU status 0x%x, cnt %d\n",
- irq_status, masked, vou_status, cnt);
-
- cnt++;
- /* side = vou_status & 0x10000; */
-
- /* Clear only set interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, masked);
-
- vb = vou_dev->active;
- if (list_is_singular(&vb->list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vb->vb);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- list_del(&vb->list);
-
- vb->vb.vb2_buf.timestamp = ktime_get_ns();
- vb->vb.sequence = vou_dev->sequence++;
- vb->vb.field = V4L2_FIELD_INTERLACED;
- vb2_buffer_done(&vb->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
- vou_dev->active = list_entry(vou_dev->buf_list.next,
- struct sh_vou_buffer, list);
-
- if (list_is_singular(&vou_dev->buf_list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vou_dev->active->vb);
- } else {
- struct sh_vou_buffer *new = list_entry(vou_dev->active->list.next,
- struct sh_vou_buffer, list);
- sh_vou_schedule_next(vou_dev, &new->vb);
- }
-
- spin_unlock(&vou_dev->lock);
-
- return IRQ_HANDLED;
-}
-
-static int sh_vou_hw_init(struct sh_vou_device *vou_dev)
-{
- struct sh_vou_pdata *pdata = vou_dev->pdata;
- u32 voucr = sh_vou_ntsc_mode(pdata->bus_fmt) << 29;
- int i = 100;
-
- /* Disable all IRQs */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0);
-
- /* Reset VOU interfaces - registers unaffected */
- sh_vou_reg_a_write(vou_dev, VOUSRR, 0x101);
- while (--i && (sh_vou_reg_a_read(vou_dev, VOUSRR) & 0x101))
- udelay(1);
-
- if (!i)
- return -ETIMEDOUT;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "Reset took %dus\n", 100 - i);
-
- if (pdata->flags & SH_VOU_PCLK_FALLING)
- voucr |= 1 << 28;
- if (pdata->flags & SH_VOU_HSYNC_LOW)
- voucr |= 1 << 27;
- if (pdata->flags & SH_VOU_VSYNC_LOW)
- voucr |= 1 << 26;
- sh_vou_reg_ab_set(vou_dev, VOUCR, voucr, 0xfc000000);
-
- /* Manual register side switching at first */
- sh_vou_reg_a_write(vou_dev, VOURCR, 4);
- /* Default - fixed HSYNC length, can be made configurable is required */
- sh_vou_reg_ab_write(vou_dev, VOUMSR, 0x800000);
-
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-/* File operations */
-static int sh_vou_open(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int err;
-
- if (mutex_lock_interruptible(&vou_dev->fop_lock))
- return -ERESTARTSYS;
-
- err = v4l2_fh_open(file);
- if (err)
- goto done_open;
- if (v4l2_fh_is_singular_file(file) &&
- vou_dev->status == SH_VOU_INITIALISING) {
- /* First open */
- err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
- if (err < 0) {
- v4l2_fh_release(file);
- goto done_open;
- }
- err = sh_vou_hw_init(vou_dev);
- if (err < 0) {
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- v4l2_fh_release(file);
- } else {
- vou_dev->status = SH_VOU_IDLE;
- }
- }
-done_open:
- mutex_unlock(&vou_dev->fop_lock);
- return err;
-}
-
-static int sh_vou_release(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- bool is_last;
-
- mutex_lock(&vou_dev->fop_lock);
- is_last = v4l2_fh_is_singular_file(file);
- _vb2_fop_release(file, NULL);
- if (is_last) {
- /* Last close */
- vou_dev->status = SH_VOU_INITIALISING;
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 0x101);
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- }
- mutex_unlock(&vou_dev->fop_lock);
- return 0;
-}
-
-/* sh_vou display ioctl operations */
-static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = {
- .vidioc_querycap = sh_vou_querycap,
- .vidioc_enum_fmt_vid_out = sh_vou_enum_fmt_vid_out,
- .vidioc_g_fmt_vid_out = sh_vou_g_fmt_vid_out,
- .vidioc_s_fmt_vid_out = sh_vou_s_fmt_vid_out,
- .vidioc_try_fmt_vid_out = sh_vou_try_fmt_vid_out,
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_create_bufs = vb2_ioctl_create_bufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- .vidioc_expbuf = vb2_ioctl_expbuf,
- .vidioc_g_output = sh_vou_g_output,
- .vidioc_s_output = sh_vou_s_output,
- .vidioc_enum_output = sh_vou_enum_output,
- .vidioc_s_std = sh_vou_s_std,
- .vidioc_g_std = sh_vou_g_std,
- .vidioc_g_selection = sh_vou_g_selection,
- .vidioc_s_selection = sh_vou_s_selection,
- .vidioc_log_status = sh_vou_log_status,
-};
-
-static const struct v4l2_file_operations sh_vou_fops = {
- .owner = THIS_MODULE,
- .open = sh_vou_open,
- .release = sh_vou_release,
- .unlocked_ioctl = video_ioctl2,
- .mmap = vb2_fop_mmap,
- .poll = vb2_fop_poll,
- .write = vb2_fop_write,
-};
-
-static const struct video_device sh_vou_video_template = {
- .name = "sh_vou",
- .fops = &sh_vou_fops,
- .ioctl_ops = &sh_vou_ioctl_ops,
- .tvnorms = V4L2_STD_525_60, /* PAL only supported in 8-bit non-bt656 mode */
- .vfl_dir = VFL_DIR_TX,
- .device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
-};
-
-static int sh_vou_probe(struct platform_device *pdev)
-{
- struct sh_vou_pdata *vou_pdata = pdev->dev.platform_data;
- struct v4l2_rect *rect;
- struct v4l2_pix_format *pix;
- struct i2c_adapter *i2c_adap;
- struct video_device *vdev;
- struct sh_vou_device *vou_dev;
- struct resource *reg_res;
- struct v4l2_subdev *subdev;
- struct vb2_queue *q;
- int irq, ret;
-
- reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
-
- if (!vou_pdata || !reg_res || irq <= 0) {
- dev_err(&pdev->dev, "Insufficient VOU platform information.\n");
- return -ENODEV;
- }
-
- vou_dev = devm_kzalloc(&pdev->dev, sizeof(*vou_dev), GFP_KERNEL);
- if (!vou_dev)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&vou_dev->buf_list);
- spin_lock_init(&vou_dev->lock);
- mutex_init(&vou_dev->fop_lock);
- vou_dev->pdata = vou_pdata;
- vou_dev->status = SH_VOU_INITIALISING;
- vou_dev->pix_idx = 1;
-
- rect = &vou_dev->rect;
- pix = &vou_dev->pix;
-
- /* Fill in defaults */
- vou_dev->std = V4L2_STD_NTSC_M;
- rect->left = 0;
- rect->top = 0;
- rect->width = VOU_MAX_IMAGE_WIDTH;
- rect->height = 480;
- pix->width = VOU_MAX_IMAGE_WIDTH;
- pix->height = 480;
- pix->pixelformat = V4L2_PIX_FMT_NV16;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->bytesperline = VOU_MAX_IMAGE_WIDTH;
- pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * 480;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
- vou_dev->base = devm_ioremap_resource(&pdev->dev, reg_res);
- if (IS_ERR(vou_dev->base))
- return PTR_ERR(vou_dev->base);
-
- ret = devm_request_irq(&pdev->dev, irq, sh_vou_isr, 0, "vou", vou_dev);
- if (ret < 0)
- return ret;
-
- ret = v4l2_device_register(&pdev->dev, &vou_dev->v4l2_dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "Error registering v4l2 device\n");
- return ret;
- }
-
- vdev = &vou_dev->vdev;
- *vdev = sh_vou_video_template;
- if (vou_pdata->bus_fmt == SH_VOU_BUS_8BIT)
- vdev->tvnorms |= V4L2_STD_PAL;
- vdev->v4l2_dev = &vou_dev->v4l2_dev;
- vdev->release = video_device_release_empty;
- vdev->lock = &vou_dev->fop_lock;
-
- video_set_drvdata(vdev, vou_dev);
-
- /* Initialize the vb2 queue */
- q = &vou_dev->queue;
- q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_WRITE;
- q->drv_priv = vou_dev;
- q->buf_struct_size = sizeof(struct sh_vou_buffer);
- q->ops = &sh_vou_qops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- q->min_buffers_needed = 2;
- q->lock = &vou_dev->fop_lock;
- q->dev = &pdev->dev;
- ret = vb2_queue_init(q);
- if (ret)
- goto ei2cgadap;
-
- vdev->queue = q;
- INIT_LIST_HEAD(&vou_dev->buf_list);
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- i2c_adap = i2c_get_adapter(vou_pdata->i2c_adap);
- if (!i2c_adap) {
- ret = -ENODEV;
- goto ei2cgadap;
- }
-
- ret = sh_vou_hw_init(vou_dev);
- if (ret < 0)
- goto ereset;
-
- subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- vou_pdata->board_info, NULL);
- if (!subdev) {
- ret = -ENOMEM;
- goto ei2cnd;
- }
-
- ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
- if (ret < 0)
- goto evregdev;
-
- return 0;
-
-evregdev:
-ei2cnd:
-ereset:
- i2c_put_adapter(i2c_adap);
-ei2cgadap:
- pm_runtime_disable(&pdev->dev);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return ret;
-}
-
-static int sh_vou_remove(struct platform_device *pdev)
-{
- struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
- struct sh_vou_device *vou_dev = container_of(v4l2_dev,
- struct sh_vou_device, v4l2_dev);
- struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next,
- struct v4l2_subdev, list);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- pm_runtime_disable(&pdev->dev);
- video_unregister_device(&vou_dev->vdev);
- i2c_put_adapter(client->adapter);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return 0;
-}
-
-static struct platform_driver sh_vou = {
- .remove = sh_vou_remove,
- .driver = {
- .name = "sh-vou",
- },
-};
-
-module_platform_driver_probe(sh_vou, sh_vou_probe);
-
-MODULE_DESCRIPTION("SuperH VOU driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1.0");
-MODULE_ALIAS("platform:sh-vou");
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Now that arch/sh is removed this driver is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/media/platform/renesas/Kconfig | 9 -
drivers/media/platform/renesas/Makefile | 1 -
drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
3 files changed, 1385 deletions(-)
delete mode 100644 drivers/media/platform/renesas/sh_vou.c
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
index 0231672a7e1c32..935b24b864380e 100644
--- a/drivers/media/platform/renesas/Kconfig
+++ b/drivers/media/platform/renesas/Kconfig
@@ -31,15 +31,6 @@ config VIDEO_RCAR_ISP
To compile this driver as a module, choose M here: the
module will be called rcar-isp.
-config VIDEO_SH_VOU
- tristate "SuperH VOU video output driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV && I2C
- depends on ARCH_SHMOBILE || COMPILE_TEST
- select VIDEOBUF2_DMA_CONTIG
- help
- Support for the Video Output Unit (VOU) on SuperH SoCs.
-
source "drivers/media/platform/renesas/rcar-vin/Kconfig"
source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile
index 55854e8688870f..1ae7d825073df3 100644
--- a/drivers/media/platform/renesas/Makefile
+++ b/drivers/media/platform/renesas/Makefile
@@ -13,4 +13,3 @@ obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
-obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
diff --git a/drivers/media/platform/renesas/sh_vou.c b/drivers/media/platform/renesas/sh_vou.c
deleted file mode 100644
index ca4310e26c49ee..00000000000000
--- a/drivers/media/platform/renesas/sh_vou.c
+++ /dev/null
@@ -1,1375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SuperH Video Output Unit (VOU) driver
- *
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/drv-intf/sh_vou.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-mediabus.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-
-/* Mirror addresses are not available for all registers */
-#define VOUER 0
-#define VOUCR 4
-#define VOUSTR 8
-#define VOUVCR 0xc
-#define VOUISR 0x10
-#define VOUBCR 0x14
-#define VOUDPR 0x18
-#define VOUDSR 0x1c
-#define VOUVPR 0x20
-#define VOUIR 0x24
-#define VOUSRR 0x28
-#define VOUMSR 0x2c
-#define VOUHIR 0x30
-#define VOUDFR 0x34
-#define VOUAD1R 0x38
-#define VOUAD2R 0x3c
-#define VOUAIR 0x40
-#define VOUSWR 0x44
-#define VOURCR 0x48
-#define VOURPR 0x50
-
-enum sh_vou_status {
- SH_VOU_IDLE,
- SH_VOU_INITIALISING,
- SH_VOU_RUNNING,
-};
-
-#define VOU_MIN_IMAGE_WIDTH 16
-#define VOU_MAX_IMAGE_WIDTH 720
-#define VOU_MIN_IMAGE_HEIGHT 16
-
-struct sh_vou_buffer {
- struct vb2_v4l2_buffer vb;
- struct list_head list;
-};
-
-static inline struct
-sh_vou_buffer *to_sh_vou_buffer(struct vb2_v4l2_buffer *vb2)
-{
- return container_of(vb2, struct sh_vou_buffer, vb);
-}
-
-struct sh_vou_device {
- struct v4l2_device v4l2_dev;
- struct video_device vdev;
- struct sh_vou_pdata *pdata;
- spinlock_t lock;
- void __iomem *base;
- /* State information */
- struct v4l2_pix_format pix;
- struct v4l2_rect rect;
- struct list_head buf_list;
- v4l2_std_id std;
- int pix_idx;
- struct vb2_queue queue;
- struct sh_vou_buffer *active;
- enum sh_vou_status status;
- unsigned sequence;
- struct mutex fop_lock;
-};
-
-/* Register access routines for sides A, B and mirror addresses */
-static void sh_vou_reg_a_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_ab_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg);
- __raw_writel(value, vou_dev->base + reg + 0x1000);
-}
-
-static void sh_vou_reg_m_write(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value)
-{
- __raw_writel(value, vou_dev->base + reg + 0x2000);
-}
-
-static u32 sh_vou_reg_a_read(struct sh_vou_device *vou_dev, unsigned int reg)
-{
- return __raw_readl(vou_dev->base + reg);
-}
-
-static void sh_vou_reg_a_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- u32 old = __raw_readl(vou_dev->base + reg);
-
- value = (value & mask) | (old & ~mask);
- __raw_writel(value, vou_dev->base + reg);
-}
-
-static void sh_vou_reg_b_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg + 0x1000, value, mask);
-}
-
-static void sh_vou_reg_ab_set(struct sh_vou_device *vou_dev, unsigned int reg,
- u32 value, u32 mask)
-{
- sh_vou_reg_a_set(vou_dev, reg, value, mask);
- sh_vou_reg_b_set(vou_dev, reg, value, mask);
-}
-
-struct sh_vou_fmt {
- u32 pfmt;
- unsigned char bpp;
- unsigned char bpl;
- unsigned char rgb;
- unsigned char yf;
- unsigned char pkf;
-};
-
-/* Further pixel formats can be added */
-static struct sh_vou_fmt vou_fmt[] = {
- {
- .pfmt = V4L2_PIX_FMT_NV12,
- .bpp = 12,
- .bpl = 1,
- .yf = 0,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_NV16,
- .bpp = 16,
- .bpl = 1,
- .yf = 1,
- .rgb = 0,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB24,
- .bpp = 24,
- .bpl = 3,
- .pkf = 2,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
- {
- .pfmt = V4L2_PIX_FMT_RGB565X,
- .bpp = 16,
- .bpl = 2,
- .pkf = 3,
- .rgb = 1,
- },
-};
-
-static void sh_vou_schedule_next(struct sh_vou_device *vou_dev,
- struct vb2_v4l2_buffer *vbuf)
-{
- dma_addr_t addr1, addr2;
-
- addr1 = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
- switch (vou_dev->pix.pixelformat) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- addr2 = addr1 + vou_dev->pix.width * vou_dev->pix.height;
- break;
- default:
- addr2 = 0;
- }
-
- sh_vou_reg_m_write(vou_dev, VOUAD1R, addr1);
- sh_vou_reg_m_write(vou_dev, VOUAD2R, addr2);
-}
-
-static void sh_vou_stream_config(struct sh_vou_device *vou_dev)
-{
- unsigned int row_coeff;
-#ifdef __LITTLE_ENDIAN
- u32 dataswap = 7;
-#else
- u32 dataswap = 0;
-#endif
-
- switch (vou_dev->pix.pixelformat) {
- default:
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV16:
- row_coeff = 1;
- break;
- case V4L2_PIX_FMT_RGB565:
- dataswap ^= 1;
- fallthrough;
- case V4L2_PIX_FMT_RGB565X:
- row_coeff = 2;
- break;
- case V4L2_PIX_FMT_RGB24:
- row_coeff = 3;
- break;
- }
-
- sh_vou_reg_a_write(vou_dev, VOUSWR, dataswap);
- sh_vou_reg_ab_write(vou_dev, VOUAIR, vou_dev->pix.width * row_coeff);
-}
-
-/* Locking: caller holds fop_lock mutex */
-static int sh_vou_queue_setup(struct vb2_queue *vq,
- unsigned int *nbuffers, unsigned int *nplanes,
- unsigned int sizes[], struct device *alloc_devs[])
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- int bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (*nplanes)
- return sizes[0] < pix->height * bytes_per_line ? -EINVAL : 0;
- *nplanes = 1;
- sizes[0] = pix->height * bytes_per_line;
- return 0;
-}
-
-static int sh_vou_buf_prepare(struct vb2_buffer *vb)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct v4l2_pix_format *pix = &vou_dev->pix;
- unsigned bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8;
- unsigned size = pix->height * bytes_per_line;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- if (vb2_plane_size(vb, 0) < size) {
- /* User buffer too small */
- dev_warn(vou_dev->v4l2_dev.dev, "buffer too small (%lu < %u)\n",
- vb2_plane_size(vb, 0), size);
- return -EINVAL;
- }
-
- vb2_set_plane_payload(vb, 0, size);
- return 0;
-}
-
-/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
-static void sh_vou_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue);
- struct sh_vou_buffer *shbuf = to_sh_vou_buffer(vbuf);
- unsigned long flags;
-
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_add_tail(&shbuf->list, &vou_dev->buf_list);
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static int sh_vou_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- int ret;
-
- vou_dev->sequence = 0;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD) {
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf,
- VB2_BUF_STATE_QUEUED);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- return ret;
- }
-
- buf = list_entry(vou_dev->buf_list.next, struct sh_vou_buffer, list);
-
- vou_dev->active = buf;
-
- /* Start from side A: we use mirror addresses, so, set B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 1);
- dev_dbg(vou_dev->v4l2_dev.dev, "%s: first buffer status 0x%x\n",
- __func__, sh_vou_reg_a_read(vou_dev, VOUSTR));
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- buf = list_entry(buf->list.next, struct sh_vou_buffer, list);
-
- /* Second buffer - initialise register side B */
- sh_vou_reg_a_write(vou_dev, VOURPR, 0);
- sh_vou_schedule_next(vou_dev, &buf->vb);
-
- /* Register side switching with frame VSYNC */
- sh_vou_reg_a_write(vou_dev, VOURCR, 5);
-
- sh_vou_stream_config(vou_dev);
- /* Enable End-of-Frame (VSYNC) interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0x10004);
-
- /* Two buffers on the queue - activate the hardware */
- vou_dev->status = SH_VOU_RUNNING;
- sh_vou_reg_a_write(vou_dev, VOUER, 0x107);
- return 0;
-}
-
-static void sh_vou_stop_streaming(struct vb2_queue *vq)
-{
- struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq);
- struct sh_vou_buffer *buf, *node;
- unsigned long flags;
-
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0,
- video, s_stream, 0);
- /* disable output */
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 1);
- /* ...but the current frame will complete */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x30000);
- msleep(50);
- spin_lock_irqsave(&vou_dev->lock, flags);
- list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) {
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- list_del(&buf->list);
- }
- vou_dev->active = NULL;
- spin_unlock_irqrestore(&vou_dev->lock, flags);
-}
-
-static const struct vb2_ops sh_vou_qops = {
- .queue_setup = sh_vou_queue_setup,
- .buf_prepare = sh_vou_buf_prepare,
- .buf_queue = sh_vou_buf_queue,
- .start_streaming = sh_vou_start_streaming,
- .stop_streaming = sh_vou_stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-/* Video IOCTLs */
-static int sh_vou_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- strscpy(cap->card, "SuperH VOU", sizeof(cap->card));
- strscpy(cap->driver, "sh-vou", sizeof(cap->driver));
- strscpy(cap->bus_info, "platform:sh-vou", sizeof(cap->bus_info));
- return 0;
-}
-
-/* Enumerate formats, that the device can accept from the user */
-static int sh_vou_enum_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_fmtdesc *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (fmt->index >= ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->pixelformat = vou_fmt[fmt->index].pfmt;
-
- return 0;
-}
-
-static int sh_vou_g_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- fmt->fmt.pix = vou_dev->pix;
-
- return 0;
-}
-
-static const unsigned char vou_scale_h_num[] = {1, 9, 2, 9, 4};
-static const unsigned char vou_scale_h_den[] = {1, 8, 1, 4, 1};
-static const unsigned char vou_scale_h_fld[] = {0, 2, 1, 3};
-static const unsigned char vou_scale_v_num[] = {1, 2, 4};
-static const unsigned char vou_scale_v_den[] = {1, 1, 1};
-static const unsigned char vou_scale_v_fld[] = {0, 1};
-
-static void sh_vou_configure_geometry(struct sh_vou_device *vou_dev,
- int pix_idx, int w_idx, int h_idx)
-{
- struct sh_vou_fmt *fmt = vou_fmt + pix_idx;
- unsigned int black_left, black_top, width_max,
- frame_in_height, frame_out_height, frame_out_top;
- struct v4l2_rect *rect = &vou_dev->rect;
- struct v4l2_pix_format *pix = &vou_dev->pix;
- u32 vouvcr = 0, dsr_h, dsr_v;
-
- if (vou_dev->std & V4L2_STD_525_60) {
- width_max = 858;
- /* height_max = 262; */
- } else {
- width_max = 864;
- /* height_max = 312; */
- }
-
- frame_in_height = pix->height / 2;
- frame_out_height = rect->height / 2;
- frame_out_top = rect->top / 2;
-
- /*
- * Cropping scheme: max useful image is 720x480, and the total video
- * area is 858x525 (NTSC) or 864x625 (PAL). AK8813 / 8814 starts
- * sampling data beginning with fixed 276th (NTSC) / 288th (PAL) clock,
- * of which the first 33 / 25 clocks HSYNC must be held active. This
- * has to be configured in CR[HW]. 1 pixel equals 2 clock periods.
- * This gives CR[HW] = 16 / 12, VPR[HVP] = 138 / 144, which gives
- * exactly 858 - 138 = 864 - 144 = 720! We call the out-of-display area,
- * beyond DSR, specified on the left and top by the VPR register "black
- * pixels" and out-of-image area (DPR) "background pixels." We fix VPR
- * at 138 / 144 : 20, because that's the HSYNC timing, that our first
- * client requires, and that's exactly what leaves us 720 pixels for the
- * image; we leave VPR[VVP] at default 20 for now, because the client
- * doesn't seem to have any special requirements for it. Otherwise we
- * could also set it to max - 240 = 22 / 72. Thus VPR depends only on
- * the selected standard, and DPR and DSR are selected according to
- * cropping. Q: how does the client detect the first valid line? Does
- * HSYNC stay inactive during invalid (black) lines?
- */
- black_left = width_max - VOU_MAX_IMAGE_WIDTH;
- black_top = 20;
-
- dsr_h = rect->width + rect->left;
- dsr_v = frame_out_height + frame_out_top;
-
- dev_dbg(vou_dev->v4l2_dev.dev,
- "image %ux%u, black %u:%u, offset %u:%u, display %ux%u\n",
- pix->width, frame_in_height, black_left, black_top,
- rect->left, frame_out_top, dsr_h, dsr_v);
-
- /* VOUISR height - half of a frame height in frame mode */
- sh_vou_reg_ab_write(vou_dev, VOUISR, (pix->width << 16) | frame_in_height);
- sh_vou_reg_ab_write(vou_dev, VOUVPR, (black_left << 16) | black_top);
- sh_vou_reg_ab_write(vou_dev, VOUDPR, (rect->left << 16) | frame_out_top);
- sh_vou_reg_ab_write(vou_dev, VOUDSR, (dsr_h << 16) | dsr_v);
-
- /*
- * if necessary, we could set VOUHIR to
- * max(black_left + dsr_h, width_max) here
- */
-
- if (w_idx)
- vouvcr |= (1 << 15) | (vou_scale_h_fld[w_idx - 1] << 4);
- if (h_idx)
- vouvcr |= (1 << 14) | vou_scale_v_fld[h_idx - 1];
-
- dev_dbg(vou_dev->v4l2_dev.dev, "0x%08x: scaling 0x%x\n",
- fmt->pfmt, vouvcr);
-
- /* To produce a colour bar for testing set bit 23 of VOUVCR */
- sh_vou_reg_ab_write(vou_dev, VOUVCR, vouvcr);
- sh_vou_reg_ab_write(vou_dev, VOUDFR,
- fmt->pkf | (fmt->yf << 8) | (fmt->rgb << 16));
-}
-
-struct sh_vou_geometry {
- struct v4l2_rect output;
- unsigned int in_width;
- unsigned int in_height;
- int scale_idx_h;
- int scale_idx_v;
-};
-
-/*
- * Find input geometry, that we can use to produce output, closest to the
- * requested rectangle, using VOU scaling
- */
-static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- /* The compiler cannot know, that best and idx will indeed be set */
- unsigned int best_err = UINT_MAX, best = 0, img_height_max;
- int i, idx = 0;
-
- if (std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Image width must be a multiple of 4 */
- v4l_bound_align_image(&geo->in_width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &geo->in_height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- /* Select scales to come as close as possible to the output image */
- for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.width * vou_scale_h_den[i] /
- vou_scale_h_num[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_width);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_width = best;
- geo->scale_idx_h = idx;
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = ARRAY_SIZE(vou_scale_v_num) - 1; i >= 0; i--) {
- unsigned int err;
- unsigned int found = geo->output.height * vou_scale_v_den[i] /
- vou_scale_v_num[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->in_height);
- if (err < best_err) {
- best_err = err;
- idx = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->in_height = best;
- geo->scale_idx_v = idx;
-}
-
-/*
- * Find output geometry, that we can produce, using VOU scaling, closest to
- * the requested rectangle
- */
-static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std)
-{
- unsigned int best_err = UINT_MAX, best = geo->in_width,
- width_max, height_max, img_height_max;
- int i, idx_h = 0, idx_v = 0;
-
- if (std & V4L2_STD_525_60) {
- width_max = 858;
- height_max = 262 * 2;
- img_height_max = 480;
- } else {
- width_max = 864;
- height_max = 312 * 2;
- img_height_max = 576;
- }
-
- /* Select scales to come as close as possible to the output image */
- for (i = 0; i < ARRAY_SIZE(vou_scale_h_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_width * vou_scale_h_num[i] /
- vou_scale_h_den[i];
-
- if (found > VOU_MAX_IMAGE_WIDTH)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.width);
- if (err < best_err) {
- best_err = err;
- idx_h = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.width = best;
- geo->scale_idx_h = idx_h;
- if (geo->output.left + best > width_max)
- geo->output.left = width_max - best;
-
- pr_debug("%s(): W %u * %u/%u = %u\n", __func__, geo->in_width,
- vou_scale_h_num[idx_h], vou_scale_h_den[idx_h], best);
-
- best_err = UINT_MAX;
-
- /* This loop can be replaced with one division */
- for (i = 0; i < ARRAY_SIZE(vou_scale_v_num); i++) {
- unsigned int err;
- unsigned int found = geo->in_height * vou_scale_v_num[i] /
- vou_scale_v_den[i];
-
- if (found > img_height_max)
- /* scales increase */
- break;
-
- err = abs(found - geo->output.height);
- if (err < best_err) {
- best_err = err;
- idx_v = i;
- best = found;
- }
- if (!err)
- break;
- }
-
- geo->output.height = best;
- geo->scale_idx_v = idx_v;
- if (geo->output.top + best > height_max)
- geo->output.top = height_max - best;
-
- pr_debug("%s(): H %u * %u/%u = %u\n", __func__, geo->in_height,
- vou_scale_v_num[idx_v], vou_scale_v_den[idx_v], best);
-}
-
-static int sh_vou_try_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_pix_format *pix = &fmt->fmt.pix;
- unsigned int img_height_max;
- int pix_idx;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- pix->field = V4L2_FIELD_INTERLACED;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->ycbcr_enc = pix->quantization = 0;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- if (pix_idx == ARRAY_SIZE(vou_fmt))
- return -EINVAL;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&pix->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2,
- &pix->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
- pix->bytesperline = pix->width * vou_fmt[pix_idx].bpl;
- pix->sizeimage = pix->height * ((pix->width * vou_fmt[pix_idx].bpp) >> 3);
-
- return 0;
-}
-
-static int sh_vou_set_fmt_vid_out(struct sh_vou_device *vou_dev,
- struct v4l2_pix_format *pix)
-{
- unsigned int img_height_max;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- struct v4l2_mbus_framefmt *mbfmt = &format.format;
- int pix_idx;
- int ret;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++)
- if (vou_fmt[pix_idx].pfmt == pix->pixelformat)
- break;
-
- geo.in_width = pix->width;
- geo.in_height = pix->height;
- geo.output = vou_dev->rect;
-
- vou_adjust_output(&geo, vou_dev->std);
-
- mbfmt->width = geo.output.width;
- mbfmt->height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__,
- geo.output.width, geo.output.height, mbfmt->width, mbfmt->height);
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- /* Sanity checks */
- if ((unsigned)mbfmt->width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)mbfmt->height > img_height_max ||
- mbfmt->code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- if (mbfmt->width != geo.output.width ||
- mbfmt->height != geo.output.height) {
- geo.output.width = mbfmt->width;
- geo.output.height = mbfmt->height;
-
- vou_adjust_input(&geo, vou_dev->std);
- }
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u\n", __func__,
- pix->width, pix->height);
-
- vou_dev->pix_idx = pix_idx;
-
- vou_dev->pix = *pix;
-
- sh_vou_configure_geometry(vou_dev, pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static int sh_vou_s_fmt_vid_out(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret = sh_vou_try_fmt_vid_out(file, priv, fmt);
-
- if (ret)
- return ret;
- return sh_vou_set_fmt_vid_out(vou_dev, &fmt->fmt.pix);
-}
-
-static int sh_vou_enum_output(struct file *file, void *fh,
- struct v4l2_output *a)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (a->index)
- return -EINVAL;
- strscpy(a->name, "Video Out", sizeof(a->name));
- a->type = V4L2_OUTPUT_TYPE_ANALOG;
- a->std = vou_dev->vdev.tvnorms;
- return 0;
-}
-
-static int sh_vou_g_output(struct file *file, void *fh, unsigned int *i)
-{
- *i = 0;
- return 0;
-}
-
-static int sh_vou_s_output(struct file *file, void *fh, unsigned int i)
-{
- return i ? -EINVAL : 0;
-}
-
-static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt)
-{
- switch (bus_fmt) {
- default:
- pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n",
- __func__, bus_fmt);
- fallthrough;
- case SH_VOU_BUS_8BIT:
- return 1;
- case SH_VOU_BUS_16BIT:
- return 0;
- case SH_VOU_BUS_BT656:
- return 3;
- }
-}
-
-static int sh_vou_s_std(struct file *file, void *priv, v4l2_std_id std_id)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int ret;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s(): 0x%llx\n", __func__, std_id);
-
- if (std_id == vou_dev->std)
- return 0;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video,
- s_std_output, std_id);
- /* Shall we continue, if the subdev doesn't support .s_std_output()? */
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
-
- vou_dev->rect.top = vou_dev->rect.left = 0;
- vou_dev->rect.width = VOU_MAX_IMAGE_WIDTH;
- if (std_id & V4L2_STD_525_60) {
- sh_vou_reg_ab_set(vou_dev, VOUCR,
- sh_vou_ntsc_mode(vou_dev->pdata->bus_fmt) << 29, 7 << 29);
- vou_dev->rect.height = 480;
- } else {
- sh_vou_reg_ab_set(vou_dev, VOUCR, 5 << 29, 7 << 29);
- vou_dev->rect.height = 576;
- }
-
- vou_dev->pix.width = vou_dev->rect.width;
- vou_dev->pix.height = vou_dev->rect.height;
- vou_dev->pix.bytesperline =
- vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpl;
- vou_dev->pix.sizeimage = vou_dev->pix.height *
- ((vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpp) >> 3);
- vou_dev->std = std_id;
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-static int sh_vou_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__);
-
- *std = vou_dev->std;
-
- return 0;
-}
-
-static int sh_vou_log_status(struct file *file, void *priv)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- pr_info("VOUER: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUER));
- pr_info("VOUCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUCR));
- pr_info("VOUSTR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSTR));
- pr_info("VOUVCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVCR));
- pr_info("VOUISR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUISR));
- pr_info("VOUBCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUBCR));
- pr_info("VOUDPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDPR));
- pr_info("VOUDSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDSR));
- pr_info("VOUVPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVPR));
- pr_info("VOUIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUIR));
- pr_info("VOUSRR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSRR));
- pr_info("VOUMSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUMSR));
- pr_info("VOUHIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUHIR));
- pr_info("VOUDFR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDFR));
- pr_info("VOUAD1R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD1R));
- pr_info("VOUAD2R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD2R));
- pr_info("VOUAIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAIR));
- pr_info("VOUSWR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSWR));
- pr_info("VOURCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURCR));
- pr_info("VOURPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURPR));
- return 0;
-}
-
-static int sh_vou_g_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
- return -EINVAL;
- switch (sel->target) {
- case V4L2_SEL_TGT_COMPOSE:
- sel->r = vou_dev->rect;
- break;
- case V4L2_SEL_TGT_COMPOSE_DEFAULT:
- case V4L2_SEL_TGT_COMPOSE_BOUNDS:
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = VOU_MAX_IMAGE_WIDTH;
- if (vou_dev->std & V4L2_STD_525_60)
- sel->r.height = 480;
- else
- sel->r.height = 576;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* Assume a dull encoder, do all the work ourselves. */
-static int sh_vou_s_selection(struct file *file, void *fh,
- struct v4l2_selection *sel)
-{
- struct v4l2_rect *rect = &sel->r;
- struct sh_vou_device *vou_dev = video_drvdata(file);
- struct v4l2_subdev_selection sd_sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_COMPOSE,
- };
- struct v4l2_pix_format *pix = &vou_dev->pix;
- struct sh_vou_geometry geo;
- struct v4l2_subdev_format format = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- /* Revisit: is this the correct code? */
- .format.code = MEDIA_BUS_FMT_YUYV8_2X8,
- .format.field = V4L2_FIELD_INTERLACED,
- .format.colorspace = V4L2_COLORSPACE_SMPTE170M,
- };
- unsigned int img_height_max;
- int ret;
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
- sel->target != V4L2_SEL_TGT_COMPOSE)
- return -EINVAL;
-
- if (vb2_is_busy(&vou_dev->queue))
- return -EBUSY;
-
- if (vou_dev->std & V4L2_STD_525_60)
- img_height_max = 480;
- else
- img_height_max = 576;
-
- v4l_bound_align_image(&rect->width,
- VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 1,
- &rect->height,
- VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0);
-
- if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH)
- rect->left = VOU_MAX_IMAGE_WIDTH - rect->width;
-
- if (rect->height + rect->top > img_height_max)
- rect->top = img_height_max - rect->height;
-
- geo.output = *rect;
- geo.in_width = pix->width;
- geo.in_height = pix->height;
-
- /* Configure the encoder one-to-one, position at 0, ignore errors */
- sd_sel.r.width = geo.output.width;
- sd_sel.r.height = geo.output.height;
- /*
- * We first issue a S_SELECTION, so that the subsequent S_FMT delivers the
- * final encoder configuration.
- */
- v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_selection, NULL, &sd_sel);
- format.format.width = geo.output.width;
- format.format.height = geo.output.height;
- ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad,
- set_fmt, NULL, &format);
- /* Must be implemented, so, don't check for -ENOIOCTLCMD */
- if (ret < 0)
- return ret;
-
- /* Sanity checks */
- if ((unsigned)format.format.width > VOU_MAX_IMAGE_WIDTH ||
- (unsigned)format.format.height > img_height_max ||
- format.format.code != MEDIA_BUS_FMT_YUYV8_2X8)
- return -EIO;
-
- geo.output.width = format.format.width;
- geo.output.height = format.format.height;
-
- /*
- * No down-scaling. According to the API, current call has precedence:
- * https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/crop.html#cropping-structures
- */
- vou_adjust_input(&geo, vou_dev->std);
-
- /* We tried to preserve output rectangle, but it could have changed */
- vou_dev->rect = geo.output;
- pix->width = geo.in_width;
- pix->height = geo.in_height;
-
- sh_vou_configure_geometry(vou_dev, vou_dev->pix_idx,
- geo.scale_idx_h, geo.scale_idx_v);
-
- return 0;
-}
-
-static irqreturn_t sh_vou_isr(int irq, void *dev_id)
-{
- struct sh_vou_device *vou_dev = dev_id;
- static unsigned long j;
- struct sh_vou_buffer *vb;
- static int cnt;
- u32 irq_status = sh_vou_reg_a_read(vou_dev, VOUIR), masked;
- u32 vou_status = sh_vou_reg_a_read(vou_dev, VOUSTR);
-
- if (!(irq_status & 0x300)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev, "IRQ status 0x%x!\n",
- irq_status);
- return IRQ_NONE;
- }
-
- spin_lock(&vou_dev->lock);
- if (!vou_dev->active || list_empty(&vou_dev->buf_list)) {
- if (printk_timed_ratelimit(&j, 500))
- dev_warn(vou_dev->v4l2_dev.dev,
- "IRQ without active buffer: %x!\n", irq_status);
- /* Just ack: buf_release will disable further interrupts */
- sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x300);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- masked = ~(0x300 & irq_status) & irq_status & 0x30304;
- dev_dbg(vou_dev->v4l2_dev.dev,
- "IRQ status 0x%x -> 0x%x, VOU status 0x%x, cnt %d\n",
- irq_status, masked, vou_status, cnt);
-
- cnt++;
- /* side = vou_status & 0x10000; */
-
- /* Clear only set interrupts */
- sh_vou_reg_a_write(vou_dev, VOUIR, masked);
-
- vb = vou_dev->active;
- if (list_is_singular(&vb->list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vb->vb);
- spin_unlock(&vou_dev->lock);
- return IRQ_HANDLED;
- }
-
- list_del(&vb->list);
-
- vb->vb.vb2_buf.timestamp = ktime_get_ns();
- vb->vb.sequence = vou_dev->sequence++;
- vb->vb.field = V4L2_FIELD_INTERLACED;
- vb2_buffer_done(&vb->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
- vou_dev->active = list_entry(vou_dev->buf_list.next,
- struct sh_vou_buffer, list);
-
- if (list_is_singular(&vou_dev->buf_list)) {
- /* Keep cycling while no next buffer is available */
- sh_vou_schedule_next(vou_dev, &vou_dev->active->vb);
- } else {
- struct sh_vou_buffer *new = list_entry(vou_dev->active->list.next,
- struct sh_vou_buffer, list);
- sh_vou_schedule_next(vou_dev, &new->vb);
- }
-
- spin_unlock(&vou_dev->lock);
-
- return IRQ_HANDLED;
-}
-
-static int sh_vou_hw_init(struct sh_vou_device *vou_dev)
-{
- struct sh_vou_pdata *pdata = vou_dev->pdata;
- u32 voucr = sh_vou_ntsc_mode(pdata->bus_fmt) << 29;
- int i = 100;
-
- /* Disable all IRQs */
- sh_vou_reg_a_write(vou_dev, VOUIR, 0);
-
- /* Reset VOU interfaces - registers unaffected */
- sh_vou_reg_a_write(vou_dev, VOUSRR, 0x101);
- while (--i && (sh_vou_reg_a_read(vou_dev, VOUSRR) & 0x101))
- udelay(1);
-
- if (!i)
- return -ETIMEDOUT;
-
- dev_dbg(vou_dev->v4l2_dev.dev, "Reset took %dus\n", 100 - i);
-
- if (pdata->flags & SH_VOU_PCLK_FALLING)
- voucr |= 1 << 28;
- if (pdata->flags & SH_VOU_HSYNC_LOW)
- voucr |= 1 << 27;
- if (pdata->flags & SH_VOU_VSYNC_LOW)
- voucr |= 1 << 26;
- sh_vou_reg_ab_set(vou_dev, VOUCR, voucr, 0xfc000000);
-
- /* Manual register side switching at first */
- sh_vou_reg_a_write(vou_dev, VOURCR, 4);
- /* Default - fixed HSYNC length, can be made configurable is required */
- sh_vou_reg_ab_write(vou_dev, VOUMSR, 0x800000);
-
- sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix);
-
- return 0;
-}
-
-/* File operations */
-static int sh_vou_open(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- int err;
-
- if (mutex_lock_interruptible(&vou_dev->fop_lock))
- return -ERESTARTSYS;
-
- err = v4l2_fh_open(file);
- if (err)
- goto done_open;
- if (v4l2_fh_is_singular_file(file) &&
- vou_dev->status == SH_VOU_INITIALISING) {
- /* First open */
- err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
- if (err < 0) {
- v4l2_fh_release(file);
- goto done_open;
- }
- err = sh_vou_hw_init(vou_dev);
- if (err < 0) {
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- v4l2_fh_release(file);
- } else {
- vou_dev->status = SH_VOU_IDLE;
- }
- }
-done_open:
- mutex_unlock(&vou_dev->fop_lock);
- return err;
-}
-
-static int sh_vou_release(struct file *file)
-{
- struct sh_vou_device *vou_dev = video_drvdata(file);
- bool is_last;
-
- mutex_lock(&vou_dev->fop_lock);
- is_last = v4l2_fh_is_singular_file(file);
- _vb2_fop_release(file, NULL);
- if (is_last) {
- /* Last close */
- vou_dev->status = SH_VOU_INITIALISING;
- sh_vou_reg_a_set(vou_dev, VOUER, 0, 0x101);
- pm_runtime_put(vou_dev->v4l2_dev.dev);
- }
- mutex_unlock(&vou_dev->fop_lock);
- return 0;
-}
-
-/* sh_vou display ioctl operations */
-static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = {
- .vidioc_querycap = sh_vou_querycap,
- .vidioc_enum_fmt_vid_out = sh_vou_enum_fmt_vid_out,
- .vidioc_g_fmt_vid_out = sh_vou_g_fmt_vid_out,
- .vidioc_s_fmt_vid_out = sh_vou_s_fmt_vid_out,
- .vidioc_try_fmt_vid_out = sh_vou_try_fmt_vid_out,
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_create_bufs = vb2_ioctl_create_bufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- .vidioc_expbuf = vb2_ioctl_expbuf,
- .vidioc_g_output = sh_vou_g_output,
- .vidioc_s_output = sh_vou_s_output,
- .vidioc_enum_output = sh_vou_enum_output,
- .vidioc_s_std = sh_vou_s_std,
- .vidioc_g_std = sh_vou_g_std,
- .vidioc_g_selection = sh_vou_g_selection,
- .vidioc_s_selection = sh_vou_s_selection,
- .vidioc_log_status = sh_vou_log_status,
-};
-
-static const struct v4l2_file_operations sh_vou_fops = {
- .owner = THIS_MODULE,
- .open = sh_vou_open,
- .release = sh_vou_release,
- .unlocked_ioctl = video_ioctl2,
- .mmap = vb2_fop_mmap,
- .poll = vb2_fop_poll,
- .write = vb2_fop_write,
-};
-
-static const struct video_device sh_vou_video_template = {
- .name = "sh_vou",
- .fops = &sh_vou_fops,
- .ioctl_ops = &sh_vou_ioctl_ops,
- .tvnorms = V4L2_STD_525_60, /* PAL only supported in 8-bit non-bt656 mode */
- .vfl_dir = VFL_DIR_TX,
- .device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
-};
-
-static int sh_vou_probe(struct platform_device *pdev)
-{
- struct sh_vou_pdata *vou_pdata = pdev->dev.platform_data;
- struct v4l2_rect *rect;
- struct v4l2_pix_format *pix;
- struct i2c_adapter *i2c_adap;
- struct video_device *vdev;
- struct sh_vou_device *vou_dev;
- struct resource *reg_res;
- struct v4l2_subdev *subdev;
- struct vb2_queue *q;
- int irq, ret;
-
- reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
-
- if (!vou_pdata || !reg_res || irq <= 0) {
- dev_err(&pdev->dev, "Insufficient VOU platform information.\n");
- return -ENODEV;
- }
-
- vou_dev = devm_kzalloc(&pdev->dev, sizeof(*vou_dev), GFP_KERNEL);
- if (!vou_dev)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&vou_dev->buf_list);
- spin_lock_init(&vou_dev->lock);
- mutex_init(&vou_dev->fop_lock);
- vou_dev->pdata = vou_pdata;
- vou_dev->status = SH_VOU_INITIALISING;
- vou_dev->pix_idx = 1;
-
- rect = &vou_dev->rect;
- pix = &vou_dev->pix;
-
- /* Fill in defaults */
- vou_dev->std = V4L2_STD_NTSC_M;
- rect->left = 0;
- rect->top = 0;
- rect->width = VOU_MAX_IMAGE_WIDTH;
- rect->height = 480;
- pix->width = VOU_MAX_IMAGE_WIDTH;
- pix->height = 480;
- pix->pixelformat = V4L2_PIX_FMT_NV16;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->bytesperline = VOU_MAX_IMAGE_WIDTH;
- pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * 480;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
- vou_dev->base = devm_ioremap_resource(&pdev->dev, reg_res);
- if (IS_ERR(vou_dev->base))
- return PTR_ERR(vou_dev->base);
-
- ret = devm_request_irq(&pdev->dev, irq, sh_vou_isr, 0, "vou", vou_dev);
- if (ret < 0)
- return ret;
-
- ret = v4l2_device_register(&pdev->dev, &vou_dev->v4l2_dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "Error registering v4l2 device\n");
- return ret;
- }
-
- vdev = &vou_dev->vdev;
- *vdev = sh_vou_video_template;
- if (vou_pdata->bus_fmt == SH_VOU_BUS_8BIT)
- vdev->tvnorms |= V4L2_STD_PAL;
- vdev->v4l2_dev = &vou_dev->v4l2_dev;
- vdev->release = video_device_release_empty;
- vdev->lock = &vou_dev->fop_lock;
-
- video_set_drvdata(vdev, vou_dev);
-
- /* Initialize the vb2 queue */
- q = &vou_dev->queue;
- q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_WRITE;
- q->drv_priv = vou_dev;
- q->buf_struct_size = sizeof(struct sh_vou_buffer);
- q->ops = &sh_vou_qops;
- q->mem_ops = &vb2_dma_contig_memops;
- q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- q->min_buffers_needed = 2;
- q->lock = &vou_dev->fop_lock;
- q->dev = &pdev->dev;
- ret = vb2_queue_init(q);
- if (ret)
- goto ei2cgadap;
-
- vdev->queue = q;
- INIT_LIST_HEAD(&vou_dev->buf_list);
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
-
- i2c_adap = i2c_get_adapter(vou_pdata->i2c_adap);
- if (!i2c_adap) {
- ret = -ENODEV;
- goto ei2cgadap;
- }
-
- ret = sh_vou_hw_init(vou_dev);
- if (ret < 0)
- goto ereset;
-
- subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- vou_pdata->board_info, NULL);
- if (!subdev) {
- ret = -ENOMEM;
- goto ei2cnd;
- }
-
- ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
- if (ret < 0)
- goto evregdev;
-
- return 0;
-
-evregdev:
-ei2cnd:
-ereset:
- i2c_put_adapter(i2c_adap);
-ei2cgadap:
- pm_runtime_disable(&pdev->dev);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return ret;
-}
-
-static int sh_vou_remove(struct platform_device *pdev)
-{
- struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
- struct sh_vou_device *vou_dev = container_of(v4l2_dev,
- struct sh_vou_device, v4l2_dev);
- struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next,
- struct v4l2_subdev, list);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- pm_runtime_disable(&pdev->dev);
- video_unregister_device(&vou_dev->vdev);
- i2c_put_adapter(client->adapter);
- v4l2_device_unregister(&vou_dev->v4l2_dev);
- return 0;
-}
-
-static struct platform_driver sh_vou = {
- .remove = sh_vou_remove,
- .driver = {
- .name = "sh-vou",
- },
-};
-
-module_platform_driver_probe(sh_vou, sh_vou_probe);
-
-MODULE_DESCRIPTION("SuperH VOU driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1.0");
-MODULE_ALIAS("platform:sh-vou");
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* Re: [PATCH 20/22] media: remove sh_vou
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:01 ` Laurent Pinchart
-1 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 8:01 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/media/platform/renesas/Kconfig | 9 -
> drivers/media/platform/renesas/Makefile | 1 -
> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
corresponding MAINTAINERS entry dropped,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 3 files changed, 1385 deletions(-)
> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
--
Regards,
Laurent Pinchart
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 8:01 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 8:01 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/media/platform/renesas/Kconfig | 9 -
> drivers/media/platform/renesas/Makefile | 1 -
> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
corresponding MAINTAINERS entry dropped,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 3 files changed, 1385 deletions(-)
> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 8:01 ` Laurent Pinchart
0 siblings, 0 replies; 263+ messages in thread
From: Laurent Pinchart @ 2023-01-13 8:01 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
Hi Christoph,
Thank you for the patch.
On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> drivers/media/platform/renesas/Kconfig | 9 -
> drivers/media/platform/renesas/Makefile | 1 -
> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
corresponding MAINTAINERS entry dropped,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 3 files changed, 1385 deletions(-)
> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 20/22] media: remove sh_vou
2023-01-13 8:01 ` Laurent Pinchart
(?)
@ 2023-01-13 9:05 ` Hans Verkuil
-1 siblings, 0 replies; 263+ messages in thread
From: Hans Verkuil @ 2023-01-13 9:05 UTC (permalink / raw)
To: Laurent Pinchart, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 13/01/2023 09:01, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
>> Now that arch/sh is removed this driver is dead code.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/media/platform/renesas/Kconfig | 9 -
>> drivers/media/platform/renesas/Makefile | 1 -
>> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
>
> You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
> corresponding MAINTAINERS entry dropped,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
And with that you can also add my Ack:
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Regards,
Hans
>
>> 3 files changed, 1385 deletions(-)
>> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 9:05 ` Hans Verkuil
0 siblings, 0 replies; 263+ messages in thread
From: Hans Verkuil @ 2023-01-13 9:05 UTC (permalink / raw)
To: Laurent Pinchart, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 13/01/2023 09:01, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
>> Now that arch/sh is removed this driver is dead code.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/media/platform/renesas/Kconfig | 9 -
>> drivers/media/platform/renesas/Makefile | 1 -
>> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
>
> You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
> corresponding MAINTAINERS entry dropped,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
And with that you can also add my Ack:
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Regards,
Hans
>
>> 3 files changed, 1385 deletions(-)
>> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
>
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: [PATCH 20/22] media: remove sh_vou
@ 2023-01-13 9:05 ` Hans Verkuil
0 siblings, 0 replies; 263+ messages in thread
From: Hans Verkuil @ 2023-01-13 9:05 UTC (permalink / raw)
To: Laurent Pinchart, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, netdev, dmaengine,
linux-rtc
On 13/01/2023 09:01, Laurent Pinchart wrote:
> Hi Christoph,
>
> Thank you for the patch.
>
> On Fri, Jan 13, 2023 at 07:23:37AM +0100, Christoph Hellwig wrote:
>> Now that arch/sh is removed this driver is dead code.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>> drivers/media/platform/renesas/Kconfig | 9 -
>> drivers/media/platform/renesas/Makefile | 1 -
>> drivers/media/platform/renesas/sh_vou.c | 1375 -----------------------
>
> You can also emove include/media/drv-intf/sh_vou.sh. With that, and the
> corresponding MAINTAINERS entry dropped,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
And with that you can also add my Ack:
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Regards,
Hans
>
>> 3 files changed, 1385 deletions(-)
>> delete mode 100644 drivers/media/platform/renesas/sh_vou.c
>
^ permalink raw reply [flat|nested] 263+ messages in thread
* [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This was used as a hack for sh-architecture device initialization, and
with sh gone now, only the stub that always returns 0 is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/clocksource/sh_cmt.c | 8 ++------
drivers/clocksource/sh_mtu2.c | 8 ++------
drivers/clocksource/sh_tmu.c | 9 ++-------
include/linux/platform_device.h | 12 ------------
4 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7fed3529bbaf82..4f6d7d40c9fcb1 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -1109,10 +1109,8 @@ static int sh_cmt_probe(struct platform_device *pdev)
struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (cmt) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -1129,8 +1127,6 @@ static int sh_cmt_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (cmt->has_clockevent || cmt->has_clocksource)
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index e81e978513f80e..97ac2929e424be 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -448,10 +448,8 @@ static int sh_mtu2_probe(struct platform_device *pdev)
struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (mtu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -468,8 +466,6 @@ static int sh_mtu2_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (mtu->has_clockevent)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 596e9146ad54e9..940378d38dd523 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -595,10 +595,8 @@ static int sh_tmu_probe(struct platform_device *pdev)
struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (tmu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -616,9 +614,6 @@ static int sh_tmu_probe(struct platform_device *pdev)
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
-
out:
if (tmu->has_clockevent || tmu->has_clocksource)
pm_runtime_irq_safe(&pdev->dev);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index b0d5a253156ece..894939a74dd20f 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,18 +352,6 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-#ifndef CONFIG_SUPERH
-/*
- * REVISIT: This stub is needed for all non-SuperH users of early platform
- * drivers. It should go away once we introduce the new platform_device-based
- * early driver framework.
- */
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return 0;
-}
-#endif /* CONFIG_SUPERH */
-
/* For now only SuperH uses it */
void early_platform_cleanup(void);
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
This was used as a hack for sh-architecture device initialization, and
with sh gone now, only the stub that always returns 0 is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/clocksource/sh_cmt.c | 8 ++------
drivers/clocksource/sh_mtu2.c | 8 ++------
drivers/clocksource/sh_tmu.c | 9 ++-------
include/linux/platform_device.h | 12 ------------
4 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7fed3529bbaf82..4f6d7d40c9fcb1 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -1109,10 +1109,8 @@ static int sh_cmt_probe(struct platform_device *pdev)
struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (cmt) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -1129,8 +1127,6 @@ static int sh_cmt_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (cmt->has_clockevent || cmt->has_clocksource)
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index e81e978513f80e..97ac2929e424be 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -448,10 +448,8 @@ static int sh_mtu2_probe(struct platform_device *pdev)
struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (mtu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -468,8 +466,6 @@ static int sh_mtu2_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (mtu->has_clockevent)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 596e9146ad54e9..940378d38dd523 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -595,10 +595,8 @@ static int sh_tmu_probe(struct platform_device *pdev)
struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (tmu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -616,9 +614,6 @@ static int sh_tmu_probe(struct platform_device *pdev)
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
-
out:
if (tmu->has_clockevent || tmu->has_clocksource)
pm_runtime_irq_safe(&pdev->dev);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index b0d5a253156ece..894939a74dd20f 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,18 +352,6 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-#ifndef CONFIG_SUPERH
-/*
- * REVISIT: This stub is needed for all non-SuperH users of early platform
- * drivers. It should go away once we introduce the new platform_device-based
- * early driver framework.
- */
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return 0;
-}
-#endif /* CONFIG_SUPERH */
-
/* For now only SuperH uses it */
void early_platform_cleanup(void);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This was used as a hack for sh-architecture device initialization, and
with sh gone now, only the stub that always returns 0 is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/clocksource/sh_cmt.c | 8 ++------
drivers/clocksource/sh_mtu2.c | 8 ++------
drivers/clocksource/sh_tmu.c | 9 ++-------
include/linux/platform_device.h | 12 ------------
4 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 7fed3529bbaf82..4f6d7d40c9fcb1 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -1109,10 +1109,8 @@ static int sh_cmt_probe(struct platform_device *pdev)
struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (cmt) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -1129,8 +1127,6 @@ static int sh_cmt_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (cmt->has_clockevent || cmt->has_clocksource)
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index e81e978513f80e..97ac2929e424be 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -448,10 +448,8 @@ static int sh_mtu2_probe(struct platform_device *pdev)
struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (mtu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -468,8 +466,6 @@ static int sh_mtu2_probe(struct platform_device *pdev)
pm_runtime_idle(&pdev->dev);
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
out:
if (mtu->has_clockevent)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 596e9146ad54e9..940378d38dd523 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -595,10 +595,8 @@ static int sh_tmu_probe(struct platform_device *pdev)
struct sh_tmu_device *tmu = platform_get_drvdata(pdev);
int ret;
- if (!is_sh_early_platform_device(pdev)) {
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- }
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
if (tmu) {
dev_info(&pdev->dev, "kept as earlytimer\n");
@@ -616,9 +614,6 @@ static int sh_tmu_probe(struct platform_device *pdev)
return ret;
}
- if (is_sh_early_platform_device(pdev))
- return 0;
-
out:
if (tmu->has_clockevent || tmu->has_clocksource)
pm_runtime_irq_safe(&pdev->dev);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index b0d5a253156ece..894939a74dd20f 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,18 +352,6 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-#ifndef CONFIG_SUPERH
-/*
- * REVISIT: This stub is needed for all non-SuperH users of early platform
- * drivers. It should go away once we introduce the new platform_device-based
- * early driver framework.
- */
-static inline int is_sh_early_platform_device(struct platform_device *pdev)
-{
- return 0;
-}
-#endif /* CONFIG_SUPERH */
-
/* For now only SuperH uses it */
void early_platform_cleanup(void);
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* [PATCH 22/22] drivers: platform: remove early_platform_cleanup
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 6:23 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This weak stub was only overriden by the now remove sh architecture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/base/platform.c | 4 ----
include/linux/platform_device.h | 3 ---
2 files changed, 7 deletions(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 968f3d71eeab2e..eb3feabf6c2f53 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1506,14 +1506,10 @@ struct device *platform_find_device_by_driver(struct device *start,
}
EXPORT_SYMBOL_GPL(platform_find_device_by_driver);
-void __weak __init early_platform_cleanup(void) { }
-
int __init platform_bus_init(void)
{
int error;
- early_platform_cleanup();
-
error = device_register(&platform_bus);
if (error) {
put_device(&platform_bus);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 894939a74dd20f..86692f730e3a12 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,7 +352,4 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-/* For now only SuperH uses it */
-void early_platform_cleanup(void);
-
#endif /* _PLATFORM_DEVICE_H_ */
--
2.39.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 22/22] drivers: platform: remove early_platform_cleanup
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
This weak stub was only overriden by the now remove sh architecture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/base/platform.c | 4 ----
include/linux/platform_device.h | 3 ---
2 files changed, 7 deletions(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 968f3d71eeab2e..eb3feabf6c2f53 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1506,14 +1506,10 @@ struct device *platform_find_device_by_driver(struct device *start,
}
EXPORT_SYMBOL_GPL(platform_find_device_by_driver);
-void __weak __init early_platform_cleanup(void) { }
-
int __init platform_bus_init(void)
{
int error;
- early_platform_cleanup();
-
error = device_register(&platform_bus);
if (error) {
put_device(&platform_bus);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 894939a74dd20f..86692f730e3a12 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,7 +352,4 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-/* For now only SuperH uses it */
-void early_platform_cleanup(void);
-
#endif /* _PLATFORM_DEVICE_H_ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread* [PATCH 22/22] drivers: platform: remove early_platform_cleanup
@ 2023-01-13 6:23 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-13 6:23 UTC (permalink / raw)
To: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
This weak stub was only overriden by the now remove sh architecture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/base/platform.c | 4 ----
include/linux/platform_device.h | 3 ---
2 files changed, 7 deletions(-)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 968f3d71eeab2e..eb3feabf6c2f53 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1506,14 +1506,10 @@ struct device *platform_find_device_by_driver(struct device *start,
}
EXPORT_SYMBOL_GPL(platform_find_device_by_driver);
-void __weak __init early_platform_cleanup(void) { }
-
int __init platform_bus_init(void)
{
int error;
- early_platform_cleanup();
-
error = device_register(&platform_bus);
if (error) {
put_device(&platform_bus);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 894939a74dd20f..86692f730e3a12 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -352,7 +352,4 @@ extern int platform_pm_restore(struct device *dev);
#define USE_PLATFORM_PM_SLEEP_OPS
#endif
-/* For now only SuperH uses it */
-void early_platform_cleanup(void);
-
#endif /* _PLATFORM_DEVICE_H_ */
--
2.39.0
^ permalink raw reply related [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 8:09 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:09 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello!
On 1/13/23 07:23, Christoph Hellwig wrote:
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
I'm still maintaining and using this port in Debian.
It's a bit disappointing that people keep hammering on it. It works fine for me.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 8:09 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:09 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello!
On 1/13/23 07:23, Christoph Hellwig wrote:
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
I'm still maintaining and using this port in Debian.
It's a bit disappointing that people keep hammering on it. It works fine for me.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 8:09 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:09 UTC (permalink / raw)
To: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman
Cc: linux-fbdev, Geert Uytterhoeven, linux-sh, alsa-devel, dri-devel,
linux-mtd, Laurent Pinchart, linux-arch, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog, linux-gpio,
netdev, linux-usb, linux-mmc, linux-kernel, linux-spi,
linux-renesas-soc, Kieran Bingham, linux-i2c, dmaengine,
linux-rtc
Hello!
On 1/13/23 07:23, Christoph Hellwig wrote:
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
I'm still maintaining and using this port in Debian.
It's a bit disappointing that people keep hammering on it. It works fine for me.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 8:09 ` John Paul Adrian Glaubitz
(?)
@ 2023-01-13 8:26 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:26 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 9:10 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On 1/13/23 07:23, Christoph Hellwig wrote:
> > arch/sh has been a long drag because it supports a lot of SOCs, and most
> > of them haven't even been converted to device tree infrastructure. These
> > SOCs are generally obsolete as well, and all of the support has been barely
> > maintained for almost 10 years, and not at all for more than 1 year.
> >
> > Drop arch/sh and everything that depends on it.
>
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
Indeed. The main issue is not the lack of people sending patches and
fixes, but those patches never being applied by the maintainers.
Perhaps someone is willing to stand up to take over maintainership?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-13 8:26 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:26 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 9:10 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On 1/13/23 07:23, Christoph Hellwig wrote:
> > arch/sh has been a long drag because it supports a lot of SOCs, and most
> > of them haven't even been converted to device tree infrastructure. These
> > SOCs are generally obsolete as well, and all of the support has been barely
> > maintained for almost 10 years, and not at all for more than 1 year.
> >
> > Drop arch/sh and everything that depends on it.
>
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
Indeed. The main issue is not the lack of people sending patches and
fixes, but those patches never being applied by the maintainers.
Perhaps someone is willing to stand up to take over maintainership?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-13 8:26 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-13 8:26 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Jan 13, 2023 at 9:10 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On 1/13/23 07:23, Christoph Hellwig wrote:
> > arch/sh has been a long drag because it supports a lot of SOCs, and most
> > of them haven't even been converted to device tree infrastructure. These
> > SOCs are generally obsolete as well, and all of the support has been barely
> > maintained for almost 10 years, and not at all for more than 1 year.
> >
> > Drop arch/sh and everything that depends on it.
>
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
Indeed. The main issue is not the lack of people sending patches and
fixes, but those patches never being applied by the maintainers.
Perhaps someone is willing to stand up to take over maintainership?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
2023-01-13 8:26 ` Geert Uytterhoeven
(?)
@ 2023-01-13 8:52 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:52 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Geert!
On 1/13/23 09:26, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
sure my skills are sufficient. Maybe if someone can assist me?
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 8:52 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:52 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Geert!
On 1/13/23 09:26, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
sure my skills are sufficient. Maybe if someone can assist me?
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 8:52 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 8:52 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Geert!
On 1/13/23 09:26, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
sure my skills are sufficient. Maybe if someone can assist me?
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 8:52 ` John Paul Adrian Glaubitz
(?)
@ 2023-01-13 19:11 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 19:11 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 1/13/23 02:52, John Paul Adrian Glaubitz wrote:
> Hi Geert!
>
> On 1/13/23 09:26, Geert Uytterhoeven wrote:
>> Indeed. The main issue is not the lack of people sending patches and
>> fixes, but those patches never being applied by the maintainers.
>> Perhaps someone is willing to stand up to take over maintainership?
>
> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
> sure my skills are sufficient. Maybe if someone can assist me?
My skills aren't sufficient and I dunno how much time I have, but I can
certainly assist. I test sh4 regularlyish and it's in the list of architectures
I ship binaries and tiny VM images for, just refreshed tuesday:
https://landley.net/toybox/downloads/binaries/0.8.9/
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
(The sh2eb isn't a VM, it's a physical board I have here...)
There is definitely interest in this architecture. I'm aware Rich hasn't been
the most responsive maintainer. (I'm told he's on vacation with his family at
the moment, according to the text I got about this issue from the J-core
hardware guys in Japan.)
The main reason we haven't converted everything to device tree is we only have
access to test hardware for a subset of the boards. Pruning the list of
supported boards and converting the rest to device tree might make sense. We can
always add/convert boards back later...
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 19:11 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 19:11 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On 1/13/23 02:52, John Paul Adrian Glaubitz wrote:
> Hi Geert!
>
> On 1/13/23 09:26, Geert Uytterhoeven wrote:
>> Indeed. The main issue is not the lack of people sending patches and
>> fixes, but those patches never being applied by the maintainers.
>> Perhaps someone is willing to stand up to take over maintainership?
>
> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
> sure my skills are sufficient. Maybe if someone can assist me?
My skills aren't sufficient and I dunno how much time I have, but I can
certainly assist. I test sh4 regularlyish and it's in the list of architectures
I ship binaries and tiny VM images for, just refreshed tuesday:
https://landley.net/toybox/downloads/binaries/0.8.9/
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
(The sh2eb isn't a VM, it's a physical board I have here...)
There is definitely interest in this architecture. I'm aware Rich hasn't been
the most responsive maintainer. (I'm told he's on vacation with his family at
the moment, according to the text I got about this issue from the J-core
hardware guys in Japan.)
The main reason we haven't converted everything to device tree is we only have
access to test hardware for a subset of the boards. Pruning the list of
supported boards and converting the rest to device tree might make sense. We can
always add/convert boards back later...
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 19:11 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 19:11 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 1/13/23 02:52, John Paul Adrian Glaubitz wrote:
> Hi Geert!
>
> On 1/13/23 09:26, Geert Uytterhoeven wrote:
>> Indeed. The main issue is not the lack of people sending patches and
>> fixes, but those patches never being applied by the maintainers.
>> Perhaps someone is willing to stand up to take over maintainership?
>
> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
> sure my skills are sufficient. Maybe if someone can assist me?
My skills aren't sufficient and I dunno how much time I have, but I can
certainly assist. I test sh4 regularlyish and it's in the list of architectures
I ship binaries and tiny VM images for, just refreshed tuesday:
https://landley.net/toybox/downloads/binaries/0.8.9/
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
(The sh2eb isn't a VM, it's a physical board I have here...)
There is definitely interest in this architecture. I'm aware Rich hasn't been
the most responsive maintainer. (I'm told he's on vacation with his family at
the moment, according to the text I got about this issue from the J-core
hardware guys in Japan.)
The main reason we haven't converted everything to device tree is we only have
access to test hardware for a subset of the boards. Pruning the list of
supported boards and converting the rest to device tree might make sense. We can
always add/convert boards back later...
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 19:11 ` Rob Landley
(?)
@ 2023-01-13 19:05 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 19:05 UTC (permalink / raw)
To: Rob Landley, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Rob!
On 1/13/23 20:11, Rob Landley wrote:
>> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
>> sure my skills are sufficient. Maybe if someone can assist me?
>
> My skills aren't sufficient and I dunno how much time I have, but I can
> certainly assist. I test sh4 regularlyish and it's in the list of architectures
> I ship binaries and tiny VM images for, just refreshed tuesday:
>
> https://landley.net/toybox/downloads/binaries/0.8.9/
> https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
>
> (The sh2eb isn't a VM, it's a physical board I have here...)
>
> There is definitely interest in this architecture. I'm aware Rich hasn't been
> the most responsive maintainer. (I'm told he's on vacation with his family at
> the moment, according to the text I got about this issue from the J-core
> hardware guys in Japan.)
Well, maybe we can just give it a try together ...
> The main reason we haven't converted everything to device tree is we only have
> access to test hardware for a subset of the boards. Pruning the list of
> supported boards and converting the rest to device tree might make sense. We can
> always add/convert boards back later...
There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
can revive it.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 19:05 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 19:05 UTC (permalink / raw)
To: Rob Landley, Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Rob!
On 1/13/23 20:11, Rob Landley wrote:
>> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
>> sure my skills are sufficient. Maybe if someone can assist me?
>
> My skills aren't sufficient and I dunno how much time I have, but I can
> certainly assist. I test sh4 regularlyish and it's in the list of architectures
> I ship binaries and tiny VM images for, just refreshed tuesday:
>
> https://landley.net/toybox/downloads/binaries/0.8.9/
> https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
>
> (The sh2eb isn't a VM, it's a physical board I have here...)
>
> There is definitely interest in this architecture. I'm aware Rich hasn't been
> the most responsive maintainer. (I'm told he's on vacation with his family at
> the moment, according to the text I got about this issue from the J-core
> hardware guys in Japan.)
Well, maybe we can just give it a try together ...
> The main reason we haven't converted everything to device tree is we only have
> access to test hardware for a subset of the boards. Pruning the list of
> supported boards and converting the rest to device tree might make sense. We can
> always add/convert boards back later...
There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
can revive it.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 19:05 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-13 19:05 UTC (permalink / raw)
To: Rob Landley, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Rob!
On 1/13/23 20:11, Rob Landley wrote:
>> I actually would be willing to do it but I'm a bit hesitant as I'm not 100%
>> sure my skills are sufficient. Maybe if someone can assist me?
>
> My skills aren't sufficient and I dunno how much time I have, but I can
> certainly assist. I test sh4 regularlyish and it's in the list of architectures
> I ship binaries and tiny VM images for, just refreshed tuesday:
>
> https://landley.net/toybox/downloads/binaries/0.8.9/
> https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
>
> (The sh2eb isn't a VM, it's a physical board I have here...)
>
> There is definitely interest in this architecture. I'm aware Rich hasn't been
> the most responsive maintainer. (I'm told he's on vacation with his family at
> the moment, according to the text I got about this issue from the J-core
> hardware guys in Japan.)
Well, maybe we can just give it a try together ...
> The main reason we haven't converted everything to device tree is we only have
> access to test hardware for a subset of the boards. Pruning the list of
> supported boards and converting the rest to device tree might make sense. We can
> always add/convert boards back later...
There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
can revive it.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 19:05 ` John Paul Adrian Glaubitz
(?)
@ 2023-01-13 23:32 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 23:32 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 1/13/23 13:05, John Paul Adrian Glaubitz wrote:
> Hi Rob!
>
> On 1/13/23 20:11, Rob Landley wrote:
>> There is definitely interest in this architecture. I'm aware Rich hasn't been
>> the most responsive maintainer. (I'm told he's on vacation with his family at
>> the moment, according to the text I got about this issue from the J-core
>> hardware guys in Japan.)
>
> Well, maybe we can just give it a try together ...
Jeff Dionne said he'd make himself available to answer hardware questions. (He
said he maintained some Linux ports 20 years ago, but isn't current with Linux
plumbing. Last month he was digging through the guts of vxworks, and the project
before that was some sort of BSD I think?)
I _do_ maintain Linux patches, I just generally don't bother to repost them
endlessly. Here's my "on top of 6.1" stack for example, each of which links to
at least one time it was posted to linux-kernel:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/linux-patches/
>> The main reason we haven't converted everything to device tree is we only have
>> access to test hardware for a subset of the boards. Pruning the list of
>> supported boards and converting the rest to device tree might make sense. We can
>> always add/convert boards back later...
>
> There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
> can revive it.
The turtle board is device tree and has been since it was merged. The
infrastructure is there, the question is converting over boards and testing
them, or deciding to prune them. Did Sato-san convert many boards? (I'm not
finding his patch via google...)
> Adrian
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 23:32 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 23:32 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On 1/13/23 13:05, John Paul Adrian Glaubitz wrote:
> Hi Rob!
>
> On 1/13/23 20:11, Rob Landley wrote:
>> There is definitely interest in this architecture. I'm aware Rich hasn't been
>> the most responsive maintainer. (I'm told he's on vacation with his family at
>> the moment, according to the text I got about this issue from the J-core
>> hardware guys in Japan.)
>
> Well, maybe we can just give it a try together ...
Jeff Dionne said he'd make himself available to answer hardware questions. (He
said he maintained some Linux ports 20 years ago, but isn't current with Linux
plumbing. Last month he was digging through the guts of vxworks, and the project
before that was some sort of BSD I think?)
I _do_ maintain Linux patches, I just generally don't bother to repost them
endlessly. Here's my "on top of 6.1" stack for example, each of which links to
at least one time it was posted to linux-kernel:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/linux-patches/
>> The main reason we haven't converted everything to device tree is we only have
>> access to test hardware for a subset of the boards. Pruning the list of
>> supported boards and converting the rest to device tree might make sense. We can
>> always add/convert boards back later...
>
> There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
> can revive it.
The turtle board is device tree and has been since it was merged. The
infrastructure is there, the question is converting over boards and testing
them, or deciding to prune them. Did Sato-san convert many boards? (I'm not
finding his patch via google...)
> Adrian
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 23:32 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-13 23:32 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 1/13/23 13:05, John Paul Adrian Glaubitz wrote:
> Hi Rob!
>
> On 1/13/23 20:11, Rob Landley wrote:
>> There is definitely interest in this architecture. I'm aware Rich hasn't been
>> the most responsive maintainer. (I'm told he's on vacation with his family at
>> the moment, according to the text I got about this issue from the J-core
>> hardware guys in Japan.)
>
> Well, maybe we can just give it a try together ...
Jeff Dionne said he'd make himself available to answer hardware questions. (He
said he maintained some Linux ports 20 years ago, but isn't current with Linux
plumbing. Last month he was digging through the guts of vxworks, and the project
before that was some sort of BSD I think?)
I _do_ maintain Linux patches, I just generally don't bother to repost them
endlessly. Here's my "on top of 6.1" stack for example, each of which links to
at least one time it was posted to linux-kernel:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/linux-patches/
>> The main reason we haven't converted everything to device tree is we only have
>> access to test hardware for a subset of the boards. Pruning the list of
>> supported boards and converting the rest to device tree might make sense. We can
>> always add/convert boards back later...
>
> There is a patch by Yoshinori Sato which adds device tree support to SH. Maybe we
> can revive it.
The turtle board is device tree and has been since it was merged. The
infrastructure is there, the question is converting over boards and testing
them, or deciding to prune them. Did Sato-san convert many boards? (I'm not
finding his patch via google...)
> Adrian
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 8:26 ` Geert Uytterhoeven
(?)
@ 2023-01-16 7:14 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: John Paul Adrian Glaubitz, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:26:23AM +0100, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
The other problem is that it hasn't a DT conversion, and there are
lot of crufty platforms, and crufty hooks in various drivers and
core code.
It's been mentioned a few times that it might be time to go to a minimal
DT only port and then regrow what people are actually using, but for
that we need indiciations of what people are actually using.
And yes, it does need a proper maintainer, and some actual maintainer
option like cutting down unused machine support.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Jan 13, 2023 at 09:26:23AM +0100, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
The other problem is that it hasn't a DT conversion, and there are
lot of crufty platforms, and crufty hooks in various drivers and
core code.
It's been mentioned a few times that it might be time to go to a minimal
DT only port and then regrow what people are actually using, but for
that we need indiciations of what people are actually using.
And yes, it does need a proper maintainer, and some actual maintainer
option like cutting down unused machine support.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: John Paul Adrian Glaubitz, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:26:23AM +0100, Geert Uytterhoeven wrote:
> Indeed. The main issue is not the lack of people sending patches and
> fixes, but those patches never being applied by the maintainers.
> Perhaps someone is willing to stand up to take over maintainership?
The other problem is that it hasn't a DT conversion, and there are
lot of crufty platforms, and crufty hooks in various drivers and
core code.
It's been mentioned a few times that it might be time to go to a minimal
DT only port and then regrow what people are actually using, but for
that we need indiciations of what people are actually using.
And yes, it does need a proper maintainer, and some actual maintainer
option like cutting down unused machine support.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 8:09 ` John Paul Adrian Glaubitz
(?)
@ 2023-01-16 7:13 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:13 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
What platforms do you (or your users) use it on?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 7:13 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:13 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
What platforms do you (or your users) use it on?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 7:13 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-01-16 7:13 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> I'm still maintaining and using this port in Debian.
>
> It's a bit disappointing that people keep hammering on it. It works fine for me.
What platforms do you (or your users) use it on?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-16 7:13 ` Christoph Hellwig
(?)
@ 2023-01-16 8:52 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-16 8:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On 1/16/23 08:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
We have had a discussion between multiple people invested in the SuperH port and
I have decided to volunteer as a co-maintainer of the port to support Rich Felker
when he isn't available.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 8:52 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-16 8:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On 1/16/23 08:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
We have had a discussion between multiple people invested in the SuperH port and
I have decided to volunteer as a co-maintainer of the port to support Rich Felker
when he isn't available.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-16 8:52 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-01-16 8:52 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hello Christoph!
On 1/16/23 08:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
We have had a discussion between multiple people invested in the SuperH port and
I have decided to volunteer as a co-maintainer of the port to support Rich Felker
when he isn't available.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-16 8:52 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-03 7:14 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:14 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> We have had a discussion between multiple people invested in the SuperH port and
> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> when he isn't available.
So, this still isn't reflected in MAINTAINERS in linux-next. When
do you plan to take over? What platforms will remain supported and
what can we start dropping due to being unused and unmaintained?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:14 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> We have had a discussion between multiple people invested in the SuperH port and
> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> when he isn't available.
So, this still isn't reflected in MAINTAINERS in linux-next. When
do you plan to take over? What platforms will remain supported and
what can we start dropping due to being unused and unmaintained?
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 7:14 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 7:14 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> We have had a discussion between multiple people invested in the SuperH port and
> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> when he isn't available.
So, this still isn't reflected in MAINTAINERS in linux-next. When
do you plan to take over? What platforms will remain supported and
what can we start dropping due to being unused and unmaintained?
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 7:14 ` Christoph Hellwig
(?)
@ 2023-02-03 8:24 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 8:24 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over?
Since this is my very first time stepping up as a kernel maintainer, I was hoping
to get some pointers on what to do to make this happen.
So far, we have set up a new kernel tree and I have set up a local development and
test environment for SH kernels using my SH7785LCR board as the target platform.
Do I just need to send a patch asking to change the corresponding entry in the
MAINTAINERS file?
> What platforms will remain supported and what can we start dropping due to
> being unused and unmaintained?
This has not been sorted out yet.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 8:24 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 8:24 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over?
Since this is my very first time stepping up as a kernel maintainer, I was hoping
to get some pointers on what to do to make this happen.
So far, we have set up a new kernel tree and I have set up a local development and
test environment for SH kernels using my SH7785LCR board as the target platform.
Do I just need to send a patch asking to change the corresponding entry in the
MAINTAINERS file?
> What platforms will remain supported and what can we start dropping due to
> being unused and unmaintained?
This has not been sorted out yet.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 8:24 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 8:24 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over?
Since this is my very first time stepping up as a kernel maintainer, I was hoping
to get some pointers on what to do to make this happen.
So far, we have set up a new kernel tree and I have set up a local development and
test environment for SH kernels using my SH7785LCR board as the target platform.
Do I just need to send a patch asking to change the corresponding entry in the
MAINTAINERS file?
> What platforms will remain supported and what can we start dropping due to
> being unused and unmaintained?
This has not been sorted out yet.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 8:24 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-03 8:30 ` Christoph Hellwig
-1 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 8:30 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> Since this is my very first time stepping up as a kernel maintainer, I was hoping
> to get some pointers on what to do to make this happen.
>
> So far, we have set up a new kernel tree and I have set up a local development and
> test environment for SH kernels using my SH7785LCR board as the target platform.
>
> Do I just need to send a patch asking to change the corresponding entry in the
> MAINTAINERS file?
I'm not sure a there is a document, but:
- add the MAINTAINERS change to your tree
- ask Stephen to get your tree included in linux-next
then eventually send a pull request to Linus with all of that. Make
sure it's been in linux-next for a while.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 8:30 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 8:30 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> Since this is my very first time stepping up as a kernel maintainer, I was hoping
> to get some pointers on what to do to make this happen.
>
> So far, we have set up a new kernel tree and I have set up a local development and
> test environment for SH kernels using my SH7785LCR board as the target platform.
>
> Do I just need to send a patch asking to change the corresponding entry in the
> MAINTAINERS file?
I'm not sure a there is a document, but:
- add the MAINTAINERS change to your tree
- ask Stephen to get your tree included in linux-next
then eventually send a pull request to Linus with all of that. Make
sure it's been in linux-next for a while.
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 8:30 ` Christoph Hellwig
0 siblings, 0 replies; 263+ messages in thread
From: Christoph Hellwig @ 2023-02-03 8:30 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> Since this is my very first time stepping up as a kernel maintainer, I was hoping
> to get some pointers on what to do to make this happen.
>
> So far, we have set up a new kernel tree and I have set up a local development and
> test environment for SH kernels using my SH7785LCR board as the target platform.
>
> Do I just need to send a patch asking to change the corresponding entry in the
> MAINTAINERS file?
I'm not sure a there is a document, but:
- add the MAINTAINERS change to your tree
- ask Stephen to get your tree included in linux-next
then eventually send a pull request to Linus with all of that. Make
sure it's been in linux-next for a while.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 8:30 ` Christoph Hellwig
(?)
@ 2023-02-03 10:29 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:29 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph!
On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
>
> then eventually send a pull request to Linus with all of that. Make
> sure it's been in linux-next for a while.
OK, thanks for the pointers! Will try to get this done by next week.
We're still discussing among SuperH developer community whether there will be a second
maintainer, so please bear with us a few more days. I will collect patches in the
meantime.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 10:29 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:29 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Christoph!
On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
>
> then eventually send a pull request to Linus with all of that. Make
> sure it's been in linux-next for a while.
OK, thanks for the pointers! Will try to get this done by next week.
We're still discussing among SuperH developer community whether there will be a second
maintainer, so please bear with us a few more days. I will collect patches in the
meantime.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 10:29 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:29 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Christoph!
On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
>
> then eventually send a pull request to Linus with all of that. Make
> sure it's been in linux-next for a while.
OK, thanks for the pointers! Will try to get this done by next week.
We're still discussing among SuperH developer community whether there will be a second
maintainer, so please bear with us a few more days. I will collect patches in the
meantime.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 10:29 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-03 10:33 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 10:33 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Adrian,
On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
> >
> > then eventually send a pull request to Linus with all of that. Make
> > sure it's been in linux-next for a while.
>
> OK, thanks for the pointers! Will try to get this done by next week.
>
> We're still discussing among SuperH developer community whether there will be a second
> maintainer, so please bear with us a few more days. I will collect patches in the
> meantime.
Thanks a lot!
If you need any help with process, setup, ... don't hesitate to ask
(on e.g. #renesas-soc on Libera).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-03 10:33 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 10:33 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Adrian,
On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
> >
> > then eventually send a pull request to Linus with all of that. Make
> > sure it's been in linux-next for a while.
>
> OK, thanks for the pointers! Will try to get this done by next week.
>
> We're still discussing among SuperH developer community whether there will be a second
> maintainer, so please bear with us a few more days. I will collect patches in the
> meantime.
Thanks a lot!
If you need any help with process, setup, ... don't hesitate to ask
(on e.g. #renesas-soc on Libera).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-03 10:33 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 10:33 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Adrian,
On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
> >
> > then eventually send a pull request to Linus with all of that. Make
> > sure it's been in linux-next for a while.
>
> OK, thanks for the pointers! Will try to get this done by next week.
>
> We're still discussing among SuperH developer community whether there will be a second
> maintainer, so please bear with us a few more days. I will collect patches in the
> meantime.
Thanks a lot!
If you need any help with process, setup, ... don't hesitate to ask
(on e.g. #renesas-soc on Libera).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
2023-02-03 10:33 ` Geert Uytterhoeven
(?)
@ 2023-02-03 10:36 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:36 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Geert!
On Fri, 2023-02-03 at 11:33 +0100, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
> > On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > > to get some pointers on what to do to make this happen.
> > > >
> > > > So far, we have set up a new kernel tree and I have set up a local development and
> > > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > > >
> > > > Do I just need to send a patch asking to change the corresponding entry in the
> > > > MAINTAINERS file?
> > >
> > > I'm not sure a there is a document, but:
> > >
> > > - add the MAINTAINERS change to your tree
> > > - ask Stephen to get your tree included in linux-next
> > >
> > > then eventually send a pull request to Linus with all of that. Make
> > > sure it's been in linux-next for a while.
> >
> > OK, thanks for the pointers! Will try to get this done by next week.
> >
> > We're still discussing among SuperH developer community whether there will be a second
> > maintainer, so please bear with us a few more days. I will collect patches in the
> > meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
Thanks a lot! I've got some real-life tasks to do today, but I will join later today.
And I will ask questions ;-).
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 10:36 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:36 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Geert!
On Fri, 2023-02-03 at 11:33 +0100, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
> > On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > > to get some pointers on what to do to make this happen.
> > > >
> > > > So far, we have set up a new kernel tree and I have set up a local development and
> > > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > > >
> > > > Do I just need to send a patch asking to change the corresponding entry in the
> > > > MAINTAINERS file?
> > >
> > > I'm not sure a there is a document, but:
> > >
> > > - add the MAINTAINERS change to your tree
> > > - ask Stephen to get your tree included in linux-next
> > >
> > > then eventually send a pull request to Linus with all of that. Make
> > > sure it's been in linux-next for a while.
> >
> > OK, thanks for the pointers! Will try to get this done by next week.
> >
> > We're still discussing among SuperH developer community whether there will be a second
> > maintainer, so please bear with us a few more days. I will collect patches in the
> > meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
Thanks a lot! I've got some real-life tasks to do today, but I will join later today.
And I will ask questions ;-).
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 10:36 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-03 10:36 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Geert!
On Fri, 2023-02-03 at 11:33 +0100, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
> > On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
> > > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > > to get some pointers on what to do to make this happen.
> > > >
> > > > So far, we have set up a new kernel tree and I have set up a local development and
> > > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > > >
> > > > Do I just need to send a patch asking to change the corresponding entry in the
> > > > MAINTAINERS file?
> > >
> > > I'm not sure a there is a document, but:
> > >
> > > - add the MAINTAINERS change to your tree
> > > - ask Stephen to get your tree included in linux-next
> > >
> > > then eventually send a pull request to Linus with all of that. Make
> > > sure it's been in linux-next for a while.
> >
> > OK, thanks for the pointers! Will try to get this done by next week.
> >
> > We're still discussing among SuperH developer community whether there will be a second
> > maintainer, so please bear with us a few more days. I will collect patches in the
> > meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
Thanks a lot! I've got some real-life tasks to do today, but I will join later today.
And I will ask questions ;-).
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 10:33 ` Geert Uytterhoeven
(?)
@ 2023-02-03 15:57 ` Randy Dunlap
-1 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-03 15:57 UTC (permalink / raw)
To: Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi--
On 2/3/23 02:33, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>> to get some pointers on what to do to make this happen.
>>>>
>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>
>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>> MAINTAINERS file?
>>>
>>> I'm not sure a there is a document, but:
>>>
>>> - add the MAINTAINERS change to your tree
>>> - ask Stephen to get your tree included in linux-next
>>>
>>> then eventually send a pull request to Linus with all of that. Make
>>> sure it's been in linux-next for a while.
>>
>> OK, thanks for the pointers! Will try to get this done by next week.
>>
>> We're still discussing among SuperH developer community whether there will be a second
>> maintainer, so please bear with us a few more days. I will collect patches in the
>> meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
While Adrian and Geert are reading this, I have a question:
Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
But some architectures such as x86 and sparc have aliases.
- x86: i386 for 32 bit, x86_64 for 64 bit
- sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
- sparc: sparc32 for 32 bit, sparc64 for 64 bit
Thanks.
--
~Randy
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 15:57 ` Randy Dunlap
0 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-03 15:57 UTC (permalink / raw)
To: Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi--
On 2/3/23 02:33, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>> to get some pointers on what to do to make this happen.
>>>>
>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>
>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>> MAINTAINERS file?
>>>
>>> I'm not sure a there is a document, but:
>>>
>>> - add the MAINTAINERS change to your tree
>>> - ask Stephen to get your tree included in linux-next
>>>
>>> then eventually send a pull request to Linus with all of that. Make
>>> sure it's been in linux-next for a while.
>>
>> OK, thanks for the pointers! Will try to get this done by next week.
>>
>> We're still discussing among SuperH developer community whether there will be a second
>> maintainer, so please bear with us a few more days. I will collect patches in the
>> meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
While Adrian and Geert are reading this, I have a question:
Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
But some architectures such as x86 and sparc have aliases.
- x86: i386 for 32 bit, x86_64 for 64 bit
- sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
- sparc: sparc32 for 32 bit, sparc64 for 64 bit
Thanks.
--
~Randy
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-03 15:57 ` Randy Dunlap
0 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-03 15:57 UTC (permalink / raw)
To: Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi--
On 2/3/23 02:33, Geert Uytterhoeven wrote:
> Hi Adrian,
>
> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
> <glaubitz@physik.fu-berlin.de> wrote:
>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>> to get some pointers on what to do to make this happen.
>>>>
>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>
>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>> MAINTAINERS file?
>>>
>>> I'm not sure a there is a document, but:
>>>
>>> - add the MAINTAINERS change to your tree
>>> - ask Stephen to get your tree included in linux-next
>>>
>>> then eventually send a pull request to Linus with all of that. Make
>>> sure it's been in linux-next for a while.
>>
>> OK, thanks for the pointers! Will try to get this done by next week.
>>
>> We're still discussing among SuperH developer community whether there will be a second
>> maintainer, so please bear with us a few more days. I will collect patches in the
>> meantime.
>
> Thanks a lot!
>
> If you need any help with process, setup, ... don't hesitate to ask
> (on e.g. #renesas-soc on Libera).
While Adrian and Geert are reading this, I have a question:
Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
But some architectures such as x86 and sparc have aliases.
- x86: i386 for 32 bit, x86_64 for 64 bit
- sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
- sparc: sparc32 for 32 bit, sparc64 for 64 bit
Thanks.
--
~Randy
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 15:57 ` Randy Dunlap
(?)
@ 2023-02-03 16:04 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 16:04 UTC (permalink / raw)
To: Randy Dunlap
Cc: John Paul Adrian Glaubitz, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Randy,
On Fri, Feb 3, 2023 at 4:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
> Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
>
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
No, support for sh64 was removed in commit 37744feebc086908
("sh: remove sh5 support") in v5.8.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-03 16:04 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 16:04 UTC (permalink / raw)
To: Randy Dunlap
Cc: John Paul Adrian Glaubitz, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Randy,
On Fri, Feb 3, 2023 at 4:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
> Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
>
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
No, support for sh64 was removed in commit 37744feebc086908
("sh: remove sh5 support") in v5.8.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-03 16:04 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-02-03 16:04 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Randy,
On Fri, Feb 3, 2023 at 4:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
> Is this "sh64" still accurate and applicable? from Documentation/kbuild/kbuild.rst:
>
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
No, support for sh64 was removed in commit 37744feebc086908
("sh: remove sh5 support") in v5.8.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 15:57 ` Randy Dunlap
(?)
@ 2023-02-09 3:06 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:06 UTC (permalink / raw)
To: Randy Dunlap, Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 2/3/23 09:57, Randy Dunlap wrote:
> Hi--
>
> On 2/3/23 02:33, Geert Uytterhoeven wrote:
>> Hi Adrian,
>>
>> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
>> <glaubitz@physik.fu-berlin.de> wrote:
>>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>>> to get some pointers on what to do to make this happen.
>>>>>
>>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>>
>>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>>> MAINTAINERS file?
>>>>
>>>> I'm not sure a there is a document, but:
>>>>
>>>> - add the MAINTAINERS change to your tree
>>>> - ask Stephen to get your tree included in linux-next
>>>>
>>>> then eventually send a pull request to Linus with all of that. Make
>>>> sure it's been in linux-next for a while.
>>>
>>> OK, thanks for the pointers! Will try to get this done by next week.
>>>
>>> We're still discussing among SuperH developer community whether there will be a second
>>> maintainer, so please bear with us a few more days. I will collect patches in the
>>> meantime.
>>
>> Thanks a lot!
>>
>> If you need any help with process, setup, ... don't hesitate to ask
>> (on e.g. #renesas-soc on Libera).
>
> While Adrian and Geert are reading this, I have a question:
>
> Is this "sh64" still accurate and applicable?
I hadn't noticed it was there... Randy Dunlap added that in 2018 (commit
09b1565324cba). I wonder why?
> from Documentation/kbuild/kbuild.rst:
There isn't an active 64 bit superh architecture for the moment: sh5 was a
prototype that never shipped in volume, and support was removed in commit
37744feebc08. From the j-core side j64 hasn't shipped yet either (still planned
last I heard, but j-core went downmarket first instead due to customer demand,
and multi-issue is on the roadmap before 64 bit address space).
The general trend in linux kernel architectures has been to merge 32 and 64 bit
anyway, and just have the .config set CONFIG_64BIT to distinguish: arch/x86 was
created by merging arch/i386 and arch/x86_64 in 2007, arch/powerpc merged the 32
and 64 bit directories in 2005, arch/s390 and s390x are in the same dir,
arch/mips... (For some reason arm and arm64 are still split, but that might be
fallout from Arm Ltd trying to distinguish aarrcchh6644 from "arm" for some
reason? Dunno.)
I wonder why is this going the other way? I thought $ARCH mostly just specified
the subdirectory under arch/ with a few historical aliases in the top level
Makefile:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
# Additional ARCH settings for sparc
ifeq ($(ARCH),sparc32)
SRCARCH := sparc
endif
ifeq ($(ARCH),sparc64)
SRCARCH := sparc
endif
# Additional ARCH settings for parisc
ifeq ($(ARCH),parisc64)
SRCARCH := parisc
endif
But you could always just specify the correct ARCH directory directly and it
would work. (Always did when I tried it, although I haven't built sparc in years
because there's no musl-libc support, and never built parisc64 because I
couldn't get it to work with uClibc even before musl. I _am_ still building both
32 bit and 64 bit x86 with ARCH=x86 both times...)
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
Randy also added the sparc alias in commit 5ba800962a80. That at least exists in
the top level Makefile.
Did he mean parisc64 and typoed sh64? Because that's the only other alias in the
top level Makefile...
In any case, these are historical aliases for old builds, which can probably get
yanked because it should be a trivial fix to use the right ARCH= value for
modern builds? (I'd think?)
You'd even be able to build a 64 bit version of ARCH=i386 just fine if it wasn't
for the ONE place in arch/x86/Kconfig that actually checks:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "x86"
default "$(ARCH)" != "i386"
Same for arch/sparc/Kconfig:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "sparc"
default "$(ARCH)" = "sparc64"
Nothing else anywhere seems to care...
> Thanks.
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-09 3:06 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:06 UTC (permalink / raw)
To: Randy Dunlap, Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
On 2/3/23 09:57, Randy Dunlap wrote:
> Hi--
>
> On 2/3/23 02:33, Geert Uytterhoeven wrote:
>> Hi Adrian,
>>
>> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
>> <glaubitz@physik.fu-berlin.de> wrote:
>>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>>> to get some pointers on what to do to make this happen.
>>>>>
>>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>>
>>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>>> MAINTAINERS file?
>>>>
>>>> I'm not sure a there is a document, but:
>>>>
>>>> - add the MAINTAINERS change to your tree
>>>> - ask Stephen to get your tree included in linux-next
>>>>
>>>> then eventually send a pull request to Linus with all of that. Make
>>>> sure it's been in linux-next for a while.
>>>
>>> OK, thanks for the pointers! Will try to get this done by next week.
>>>
>>> We're still discussing among SuperH developer community whether there will be a second
>>> maintainer, so please bear with us a few more days. I will collect patches in the
>>> meantime.
>>
>> Thanks a lot!
>>
>> If you need any help with process, setup, ... don't hesitate to ask
>> (on e.g. #renesas-soc on Libera).
>
> While Adrian and Geert are reading this, I have a question:
>
> Is this "sh64" still accurate and applicable?
I hadn't noticed it was there... Randy Dunlap added that in 2018 (commit
09b1565324cba). I wonder why?
> from Documentation/kbuild/kbuild.rst:
There isn't an active 64 bit superh architecture for the moment: sh5 was a
prototype that never shipped in volume, and support was removed in commit
37744feebc08. From the j-core side j64 hasn't shipped yet either (still planned
last I heard, but j-core went downmarket first instead due to customer demand,
and multi-issue is on the roadmap before 64 bit address space).
The general trend in linux kernel architectures has been to merge 32 and 64 bit
anyway, and just have the .config set CONFIG_64BIT to distinguish: arch/x86 was
created by merging arch/i386 and arch/x86_64 in 2007, arch/powerpc merged the 32
and 64 bit directories in 2005, arch/s390 and s390x are in the same dir,
arch/mips... (For some reason arm and arm64 are still split, but that might be
fallout from Arm Ltd trying to distinguish aarrcchh6644 from "arm" for some
reason? Dunno.)
I wonder why is this going the other way? I thought $ARCH mostly just specified
the subdirectory under arch/ with a few historical aliases in the top level
Makefile:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
# Additional ARCH settings for sparc
ifeq ($(ARCH),sparc32)
SRCARCH := sparc
endif
ifeq ($(ARCH),sparc64)
SRCARCH := sparc
endif
# Additional ARCH settings for parisc
ifeq ($(ARCH),parisc64)
SRCARCH := parisc
endif
But you could always just specify the correct ARCH directory directly and it
would work. (Always did when I tried it, although I haven't built sparc in years
because there's no musl-libc support, and never built parisc64 because I
couldn't get it to work with uClibc even before musl. I _am_ still building both
32 bit and 64 bit x86 with ARCH=x86 both times...)
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
Randy also added the sparc alias in commit 5ba800962a80. That at least exists in
the top level Makefile.
Did he mean parisc64 and typoed sh64? Because that's the only other alias in the
top level Makefile...
In any case, these are historical aliases for old builds, which can probably get
yanked because it should be a trivial fix to use the right ARCH= value for
modern builds? (I'd think?)
You'd even be able to build a 64 bit version of ARCH=i386 just fine if it wasn't
for the ONE place in arch/x86/Kconfig that actually checks:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "x86"
default "$(ARCH)" != "i386"
Same for arch/sparc/Kconfig:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "sparc"
default "$(ARCH)" = "sparc64"
Nothing else anywhere seems to care...
> Thanks.
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-02-09 3:06 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:06 UTC (permalink / raw)
To: Randy Dunlap, Geert Uytterhoeven, John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
On 2/3/23 09:57, Randy Dunlap wrote:
> Hi--
>
> On 2/3/23 02:33, Geert Uytterhoeven wrote:
>> Hi Adrian,
>>
>> On Fri, Feb 3, 2023 at 11:29 AM John Paul Adrian Glaubitz
>> <glaubitz@physik.fu-berlin.de> wrote:
>>> On Fri, 2023-02-03 at 09:30 +0100, Christoph Hellwig wrote:
>>>> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
>>>>> Since this is my very first time stepping up as a kernel maintainer, I was hoping
>>>>> to get some pointers on what to do to make this happen.
>>>>>
>>>>> So far, we have set up a new kernel tree and I have set up a local development and
>>>>> test environment for SH kernels using my SH7785LCR board as the target platform.
>>>>>
>>>>> Do I just need to send a patch asking to change the corresponding entry in the
>>>>> MAINTAINERS file?
>>>>
>>>> I'm not sure a there is a document, but:
>>>>
>>>> - add the MAINTAINERS change to your tree
>>>> - ask Stephen to get your tree included in linux-next
>>>>
>>>> then eventually send a pull request to Linus with all of that. Make
>>>> sure it's been in linux-next for a while.
>>>
>>> OK, thanks for the pointers! Will try to get this done by next week.
>>>
>>> We're still discussing among SuperH developer community whether there will be a second
>>> maintainer, so please bear with us a few more days. I will collect patches in the
>>> meantime.
>>
>> Thanks a lot!
>>
>> If you need any help with process, setup, ... don't hesitate to ask
>> (on e.g. #renesas-soc on Libera).
>
> While Adrian and Geert are reading this, I have a question:
>
> Is this "sh64" still accurate and applicable?
I hadn't noticed it was there... Randy Dunlap added that in 2018 (commit
09b1565324cba). I wonder why?
> from Documentation/kbuild/kbuild.rst:
There isn't an active 64 bit superh architecture for the moment: sh5 was a
prototype that never shipped in volume, and support was removed in commit
37744feebc08. From the j-core side j64 hasn't shipped yet either (still planned
last I heard, but j-core went downmarket first instead due to customer demand,
and multi-issue is on the roadmap before 64 bit address space).
The general trend in linux kernel architectures has been to merge 32 and 64 bit
anyway, and just have the .config set CONFIG_64BIT to distinguish: arch/x86 was
created by merging arch/i386 and arch/x86_64 in 2007, arch/powerpc merged the 32
and 64 bit directories in 2005, arch/s390 and s390x are in the same dir,
arch/mips... (For some reason arm and arm64 are still split, but that might be
fallout from Arm Ltd trying to distinguish aarrcchh6644 from "arm" for some
reason? Dunno.)
I wonder why is this going the other way? I thought $ARCH mostly just specified
the subdirectory under arch/ with a few historical aliases in the top level
Makefile:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
# Additional ARCH settings for sparc
ifeq ($(ARCH),sparc32)
SRCARCH := sparc
endif
ifeq ($(ARCH),sparc64)
SRCARCH := sparc
endif
# Additional ARCH settings for parisc
ifeq ($(ARCH),parisc64)
SRCARCH := parisc
endif
But you could always just specify the correct ARCH directory directly and it
would work. (Always did when I tried it, although I haven't built sparc in years
because there's no musl-libc support, and never built parisc64 because I
couldn't get it to work with uClibc even before musl. I _am_ still building both
32 bit and 64 bit x86 with ARCH=x86 both times...)
> But some architectures such as x86 and sparc have aliases.
>
> - x86: i386 for 32 bit, x86_64 for 64 bit
> - sh: sh for 32 bit, sh64 for 64 bit <<<<<<<<<<<<<<<
> - sparc: sparc32 for 32 bit, sparc64 for 64 bit
Randy also added the sparc alias in commit 5ba800962a80. That at least exists in
the top level Makefile.
Did he mean parisc64 and typoed sh64? Because that's the only other alias in the
top level Makefile...
In any case, these are historical aliases for old builds, which can probably get
yanked because it should be a trivial fix to use the right ARCH= value for
modern builds? (I'd think?)
You'd even be able to build a 64 bit version of ARCH=i386 just fine if it wasn't
for the ONE place in arch/x86/Kconfig that actually checks:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "x86"
default "$(ARCH)" != "i386"
Same for arch/sparc/Kconfig:
config 64BIT
bool "64-bit kernel" if "$(ARCH)" = "sparc"
default "$(ARCH)" = "sparc64"
Nothing else anywhere seems to care...
> Thanks.
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 8:30 ` Christoph Hellwig
(?)
@ 2023-02-05 23:08 ` Stephen Rothwell
-1 siblings, 0 replies; 263+ messages in thread
From: Stephen Rothwell @ 2023-02-05 23:08 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]
Hi,
On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
>
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
And by "Stephen", Christoph means me. When you are ready, please send
me a request to include your tree/branch in linux-next (usually the
branch is called something like "for-next" or just "next") telling me
the git URL, and the contacts I should send email to if there are
conflicts/build issues with the branch. I will then fetch the branch
every time I create a new linux-next release (most work days), so all
you need to do is update that branch each time you are ready to publish
more commits.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-05 23:08 ` Stephen Rothwell
0 siblings, 0 replies; 263+ messages in thread
From: Stephen Rothwell @ 2023-02-05 23:08 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1.1: Type: text/plain, Size: 1305 bytes --]
Hi,
On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
>
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
And by "Stephen", Christoph means me. When you are ready, please send
me a request to include your tree/branch in linux-next (usually the
branch is called something like "for-next" or just "next") telling me
the git URL, and the contacts I should send email to if there are
conflicts/build issues with the branch. I will then fetch the branch
every time I create a new linux-next release (most work days), so all
you need to do is update that branch each time you are ready to publish
more commits.
--
Cheers,
Stephen Rothwell
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-05 23:08 ` Stephen Rothwell
0 siblings, 0 replies; 263+ messages in thread
From: Stephen Rothwell @ 2023-02-05 23:08 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]
Hi,
On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
>
> On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > to get some pointers on what to do to make this happen.
> >
> > So far, we have set up a new kernel tree and I have set up a local development and
> > test environment for SH kernels using my SH7785LCR board as the target platform.
> >
> > Do I just need to send a patch asking to change the corresponding entry in the
> > MAINTAINERS file?
>
> I'm not sure a there is a document, but:
>
> - add the MAINTAINERS change to your tree
> - ask Stephen to get your tree included in linux-next
And by "Stephen", Christoph means me. When you are ready, please send
me a request to include your tree/branch in linux-next (usually the
branch is called something like "for-next" or just "next") telling me
the git URL, and the contacts I should send email to if there are
conflicts/build issues with the branch. I will then fetch the branch
every time I create a new linux-next release (most work days), so all
you need to do is update that branch each time you are ready to publish
more commits.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-05 23:08 ` Stephen Rothwell
(?)
@ 2023-02-05 23:20 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-05 23:20 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Stephen!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
Thanks a lot! I will start with that tomorrow with Geert giving me some guidance.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-05 23:20 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-05 23:20 UTC (permalink / raw)
To: Stephen Rothwell
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Stephen!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
Thanks a lot! I will start with that tomorrow with Geert giving me some guidance.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-05 23:20 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-05 23:20 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Stephen!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
Thanks a lot! I will start with that tomorrow with Geert giving me some guidance.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-05 23:08 ` Stephen Rothwell
(?)
@ 2023-02-13 16:30 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-13 16:30 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Steve!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
I'm in the MAINTAINERS now in Linus' tree. I have requested a kernel.org
account now and will hopefully have my trees set up later this week.
I'll let you know about the URLs as soon as possible.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-13 16:30 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-13 16:30 UTC (permalink / raw)
To: Stephen Rothwell
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Steve!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
I'm in the MAINTAINERS now in Linus' tree. I have requested a kernel.org
account now and will hopefully have my trees set up later this week.
I'll let you know about the URLs as soon as possible.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-13 16:30 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-13 16:30 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hi Steve!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
I'm in the MAINTAINERS now in Linus' tree. I have requested a kernel.org
account now and will hopefully have my trees set up later this week.
I'll let you know about the URLs as soon as possible.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 16:30 ` John Paul Adrian Glaubitz
(?)
(?)
@ 2023-02-13 16:45 ` Vanessa Page
-1 siblings, 0 replies; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 16:45 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Stephen Rothwell
Cc: Christoph Hellwig, Yoshinori Sato, Rich Felker, Arnd Bergmann,
Greg Kroah-Hartman, Laurent Pinchart, Kieran Bingham,
Geert Uytterhoeven, linux-kernel, linux-watchdog, devicetree,
linux-arch, dmaengine, dri-devel, linux-renesas-soc, linux-i2c,
linux-input, linux-media, linux-mmc, linux-mtd, netdev,
linux-gpio, linux-rtc, linux-spi, linux-serial, linux-usb,
linux-fbdev, alsa-devel, linux-sh
Hey dipshit this ain’t Steve motherfucker wrong fucking inbox I told the FBI about y’all stupid asses
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Monday, February 13, 2023 11:30 AM
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Hellwig <hch@lst.de>; Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Hi Steve!
On Mon, 2023-02-06 at 10:08 +1100, Stephen Rothwell wrote:
> Hi,
>
> On Fri, 3 Feb 2023 09:30:37 +0100 Christoph Hellwig <hch@lst.de> wrote:
> >
> > On Fri, Feb 03, 2023 at 09:24:46AM +0100, John Paul Adrian Glaubitz wrote:
> > > Since this is my very first time stepping up as a kernel maintainer, I was hoping
> > > to get some pointers on what to do to make this happen.
> > >
> > > So far, we have set up a new kernel tree and I have set up a local development and
> > > test environment for SH kernels using my SH7785LCR board as the target platform.
> > >
> > > Do I just need to send a patch asking to change the corresponding entry in the
> > > MAINTAINERS file?
> >
> > I'm not sure a there is a document, but:
> >
> > - add the MAINTAINERS change to your tree
> > - ask Stephen to get your tree included in linux-next
>
> And by "Stephen", Christoph means me. When you are ready, please send
> me a request to include your tree/branch in linux-next (usually the
> branch is called something like "for-next" or just "next") telling me
> the git URL, and the contacts I should send email to if there are
> conflicts/build issues with the branch. I will then fetch the branch
> every time I create a new linux-next release (most work days), so all
> you need to do is update that branch each time you are ready to publish
> more commits.
I'm in the MAINTAINERS now in Linus' tree. I have requested a kernel.org
account now and will hopefully have my trees set up later this week.
I'll let you know about the URLs as soon as possible.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-03 7:14 ` Christoph Hellwig
(?)
@ 2023-02-07 9:06 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-07 9:06 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over? What platforms will remain supported and
> what can we start dropping due to being unused and unmaintained?
I'm getting everything ready now with Geert's help and I have a probably dumb
question regarding the MAINTAINERS file change: Shall I just add myself as an
additional maintainer first or shall I also drop Yoshinori Sato?
Also, is it desirable to add a "T:" entry for the kernel tree?
Thanks,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-07 9:06 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-07 9:06 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over? What platforms will remain supported and
> what can we start dropping due to being unused and unmaintained?
I'm getting everything ready now with Geert's help and I have a probably dumb
question regarding the MAINTAINERS file change: Shall I just add myself as an
additional maintainer first or shall I also drop Yoshinori Sato?
Also, is it desirable to add a "T:" entry for the kernel tree?
Thanks,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-07 9:06 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-07 9:06 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hello Christoph!
On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > We have had a discussion between multiple people invested in the SuperH port and
> > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > when he isn't available.
>
> So, this still isn't reflected in MAINTAINERS in linux-next. When
> do you plan to take over? What platforms will remain supported and
> what can we start dropping due to being unused and unmaintained?
I'm getting everything ready now with Geert's help and I have a probably dumb
question regarding the MAINTAINERS file change: Shall I just add myself as an
additional maintainer first or shall I also drop Yoshinori Sato?
Also, is it desirable to add a "T:" entry for the kernel tree?
Thanks,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-07 9:06 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-08 1:31 ` Randy Dunlap
-1 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-08 1:31 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> Hello Christoph!
>
> On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>>> We have had a discussion between multiple people invested in the SuperH port and
>>> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>>> when he isn't available.
>>
>> So, this still isn't reflected in MAINTAINERS in linux-next. When
>> do you plan to take over? What platforms will remain supported and
>> what can we start dropping due to being unused and unmaintained?
>
> I'm getting everything ready now with Geert's help and I have a probably dumb
> question regarding the MAINTAINERS file change: Shall I just add myself as an
> additional maintainer first or shall I also drop Yoshinori Sato?
>
> Also, is it desirable to add a "T:" entry for the kernel tree?
Yes, definitely.
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 1:31 ` Randy Dunlap
0 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-08 1:31 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> Hello Christoph!
>
> On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>>> We have had a discussion between multiple people invested in the SuperH port and
>>> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>>> when he isn't available.
>>
>> So, this still isn't reflected in MAINTAINERS in linux-next. When
>> do you plan to take over? What platforms will remain supported and
>> what can we start dropping due to being unused and unmaintained?
>
> I'm getting everything ready now with Geert's help and I have a probably dumb
> question regarding the MAINTAINERS file change: Shall I just add myself as an
> additional maintainer first or shall I also drop Yoshinori Sato?
>
> Also, is it desirable to add a "T:" entry for the kernel tree?
Yes, definitely.
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 1:31 ` Randy Dunlap
0 siblings, 0 replies; 263+ messages in thread
From: Randy Dunlap @ 2023-02-08 1:31 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> Hello Christoph!
>
> On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>>> We have had a discussion between multiple people invested in the SuperH port and
>>> I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>>> when he isn't available.
>>
>> So, this still isn't reflected in MAINTAINERS in linux-next. When
>> do you plan to take over? What platforms will remain supported and
>> what can we start dropping due to being unused and unmaintained?
>
> I'm getting everything ready now with Geert's help and I have a probably dumb
> question regarding the MAINTAINERS file change: Shall I just add myself as an
> additional maintainer first or shall I also drop Yoshinori Sato?
>
> Also, is it desirable to add a "T:" entry for the kernel tree?
Yes, definitely.
thanks.
--
~Randy
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-08 1:31 ` Randy Dunlap
(?)
@ 2023-02-08 12:13 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:13 UTC (permalink / raw)
To: Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Randy!
On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>
> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > Hello Christoph!
> >
> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > when he isn't available.
> > >
> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > do you plan to take over? What platforms will remain supported and
> > > what can we start dropping due to being unused and unmaintained?
> >
> > I'm getting everything ready now with Geert's help and I have a probably dumb
> > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > additional maintainer first or shall I also drop Yoshinori Sato?
> >
> > Also, is it desirable to add a "T:" entry for the kernel tree?
>
> Yes, definitely.
Geert has suggested to wait with adding a tree source to the entry until I get my
own kernel.org account. I have enough GPG signatures from multiple kernel developers
on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:13 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:13 UTC (permalink / raw)
To: Randy Dunlap, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
Hi Randy!
On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>
> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > Hello Christoph!
> >
> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > when he isn't available.
> > >
> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > do you plan to take over? What platforms will remain supported and
> > > what can we start dropping due to being unused and unmaintained?
> >
> > I'm getting everything ready now with Geert's help and I have a probably dumb
> > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > additional maintainer first or shall I also drop Yoshinori Sato?
> >
> > Also, is it desirable to add a "T:" entry for the kernel tree?
>
> Yes, definitely.
Geert has suggested to wait with adding a tree source to the entry until I get my
own kernel.org account. I have enough GPG signatures from multiple kernel developers
on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:13 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:13 UTC (permalink / raw)
To: Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Hi Randy!
On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>
> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > Hello Christoph!
> >
> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > when he isn't available.
> > >
> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > do you plan to take over? What platforms will remain supported and
> > > what can we start dropping due to being unused and unmaintained?
> >
> > I'm getting everything ready now with Geert's help and I have a probably dumb
> > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > additional maintainer first or shall I also drop Yoshinori Sato?
> >
> > Also, is it desirable to add a "T:" entry for the kernel tree?
>
> Yes, definitely.
Geert has suggested to wait with adding a tree source to the entry until I get my
own kernel.org account. I have enough GPG signatures from multiple kernel developers
on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-08 12:13 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-08 12:24 ` Huacai Chen
-1 siblings, 0 replies; 263+ messages in thread
From: Huacai Chen @ 2023-02-08 12:24 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Randy Dunlap, Christoph Hellwig, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Emm, maybe this patch has its chance to be merged now. :)
https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Huacai
On Wed, Feb 8, 2023 at 8:14 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
> >
> > On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > > Hello Christoph!
> > >
> > > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > > when he isn't available.
> > > >
> > > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > > do you plan to take over? What platforms will remain supported and
> > > > what can we start dropping due to being unused and unmaintained?
> > >
> > > I'm getting everything ready now with Geert's help and I have a probably dumb
> > > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > > additional maintainer first or shall I also drop Yoshinori Sato?
> > >
> > > Also, is it desirable to add a "T:" entry for the kernel tree?
> >
> > Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer
> `. `' Physicist
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:24 ` Huacai Chen
0 siblings, 0 replies; 263+ messages in thread
From: Huacai Chen @ 2023-02-08 12:24 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, Randy Dunlap, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, linux-usb, Laurent Pinchart
Emm, maybe this patch has its chance to be merged now. :)
https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Huacai
On Wed, Feb 8, 2023 at 8:14 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
> >
> > On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > > Hello Christoph!
> > >
> > > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > > when he isn't available.
> > > >
> > > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > > do you plan to take over? What platforms will remain supported and
> > > > what can we start dropping due to being unused and unmaintained?
> > >
> > > I'm getting everything ready now with Geert's help and I have a probably dumb
> > > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > > additional maintainer first or shall I also drop Yoshinori Sato?
> > >
> > > Also, is it desirable to add a "T:" entry for the kernel tree?
> >
> > Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer
> `. `' Physicist
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:24 ` Huacai Chen
0 siblings, 0 replies; 263+ messages in thread
From: Huacai Chen @ 2023-02-08 12:24 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Randy Dunlap, Christoph Hellwig, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Emm, maybe this patch has its chance to be merged now. :)
https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Huacai
On Wed, Feb 8, 2023 at 8:14 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
> >
> > On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
> > > Hello Christoph!
> > >
> > > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
> > > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
> > > > > We have had a discussion between multiple people invested in the SuperH port and
> > > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
> > > > > when he isn't available.
> > > >
> > > > So, this still isn't reflected in MAINTAINERS in linux-next. When
> > > > do you plan to take over? What platforms will remain supported and
> > > > what can we start dropping due to being unused and unmaintained?
> > >
> > > I'm getting everything ready now with Geert's help and I have a probably dumb
> > > question regarding the MAINTAINERS file change: Shall I just add myself as an
> > > additional maintainer first or shall I also drop Yoshinori Sato?
> > >
> > > Also, is it desirable to add a "T:" entry for the kernel tree?
> >
> > Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer
> `. `' Physicist
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-08 12:24 ` Huacai Chen
(?)
@ 2023-02-08 12:37 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:37 UTC (permalink / raw)
To: Huacai Chen
Cc: Randy Dunlap, Christoph Hellwig, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Huacei!
On Wed, 2023-02-08 at 20:24 +0800, Huacai Chen wrote:
> Emm, maybe this patch has its chance to be merged now. :)
>
> https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Yes, that's the plan. We're collecting the various patches people have sent
in for arch/sh, review and test them and apply them.
My test board is running the latest kernel now, so I can test new patches, too.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:37 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:37 UTC (permalink / raw)
To: Huacai Chen
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, Greg Kroah-Hartman, Randy Dunlap, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, alsa-devel, linux-usb, Laurent Pinchart
Hi Huacei!
On Wed, 2023-02-08 at 20:24 +0800, Huacai Chen wrote:
> Emm, maybe this patch has its chance to be merged now. :)
>
> https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Yes, that's the plan. We're collecting the various patches people have sent
in for arch/sh, review and test them and apply them.
My test board is running the latest kernel now, so I can test new patches, too.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 12:37 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-08 12:37 UTC (permalink / raw)
To: Huacai Chen
Cc: Randy Dunlap, Christoph Hellwig, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Huacei!
On Wed, 2023-02-08 at 20:24 +0800, Huacai Chen wrote:
> Emm, maybe this patch has its chance to be merged now. :)
>
> https://lore.kernel.org/linux-sh/CAAhV-H6siOtVkZpkS4aABejgZCqTwp3TihA0+0HGZ1+mU3XAVA@mail.gmail.com/T/#u
Yes, that's the plan. We're collecting the various patches people have sent
in for arch/sh, review and test them and apply them.
My test board is running the latest kernel now, so I can test new patches, too.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-08 12:37 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-08 14:12 ` Wolfram Sang
-1 siblings, 0 replies; 263+ messages in thread
From: Wolfram Sang @ 2023-02-08 14:12 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Huacai Chen, Randy Dunlap, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1.1: Type: text/plain, Size: 447 bytes --]
> Yes, that's the plan. We're collecting the various patches people have sent
> in for arch/sh, review and test them and apply them.
>
> My test board is running the latest kernel now, so I can test new patches, too.
I am just witnessing this development, but I want to say thanks for your
effort and congrats on your progress. Looks like you do the right things
correctly, cool! Kudos also to Geert and others for their assistance.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 14:12 ` Wolfram Sang
0 siblings, 0 replies; 263+ messages in thread
From: Wolfram Sang @ 2023-02-08 14:12 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Huacai Chen, Randy Dunlap, Christoph Hellwig, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1: Type: text/plain, Size: 447 bytes --]
> Yes, that's the plan. We're collecting the various patches people have sent
> in for arch/sh, review and test them and apply them.
>
> My test board is running the latest kernel now, so I can test new patches, too.
I am just witnessing this development, but I want to say thanks for your
effort and congrats on your progress. Looks like you do the right things
correctly, cool! Kudos also to Geert and others for their assistance.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-08 14:12 ` Wolfram Sang
0 siblings, 0 replies; 263+ messages in thread
From: Wolfram Sang @ 2023-02-08 14:12 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, Huacai Chen, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog,
Arnd Bergmann, linux-gpio, Greg Kroah-Hartman, Randy Dunlap,
linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, linux-usb,
Laurent Pinchart
[-- Attachment #1: Type: text/plain, Size: 447 bytes --]
> Yes, that's the plan. We're collecting the various patches people have sent
> in for arch/sh, review and test them and apply them.
>
> My test board is running the latest kernel now, so I can test new patches, too.
I am just witnessing this development, but I want to say thanks for your
effort and congrats on your progress. Looks like you do the right things
correctly, cool! Kudos also to Geert and others for their assistance.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-08 12:13 ` John Paul Adrian Glaubitz
(?)
@ 2023-02-09 3:09 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:09 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Randy Dunlap, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On 2/8/23 06:13, John Paul Adrian Glaubitz wrote:
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>>
>> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
>> > Hello Christoph!
>> >
>> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>> > > > We have had a discussion between multiple people invested in the SuperH port and
>> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>> > > > when he isn't available.
>> > >
>> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
>> > > do you plan to take over? What platforms will remain supported and
>> > > what can we start dropping due to being unused and unmaintained?
>> >
>> > I'm getting everything ready now with Geert's help and I have a probably dumb
>> > question regarding the MAINTAINERS file change: Shall I just add myself as an
>> > additional maintainer first or shall I also drop Yoshinori Sato?
>> >
>> > Also, is it desirable to add a "T:" entry for the kernel tree?
>>
>> Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
but push to kernel.org and ask Linus to pull from there?
> Adrian
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-09 3:09 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:09 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 2/8/23 06:13, John Paul Adrian Glaubitz wrote:
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>>
>> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
>> > Hello Christoph!
>> >
>> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>> > > > We have had a discussion between multiple people invested in the SuperH port and
>> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>> > > > when he isn't available.
>> > >
>> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
>> > > do you plan to take over? What platforms will remain supported and
>> > > what can we start dropping due to being unused and unmaintained?
>> >
>> > I'm getting everything ready now with Geert's help and I have a probably dumb
>> > question regarding the MAINTAINERS file change: Shall I just add myself as an
>> > additional maintainer first or shall I also drop Yoshinori Sato?
>> >
>> > Also, is it desirable to add a "T:" entry for the kernel tree?
>>
>> Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
but push to kernel.org and ask Linus to pull from there?
> Adrian
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-09 3:09 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-02-09 3:09 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 2/8/23 06:13, John Paul Adrian Glaubitz wrote:
> Hi Randy!
>
> On Tue, 2023-02-07 at 17:31 -0800, Randy Dunlap wrote:
>>
>> On 2/7/23 01:06, John Paul Adrian Glaubitz wrote:
>> > Hello Christoph!
>> >
>> > On Fri, 2023-02-03 at 08:14 +0100, Christoph Hellwig wrote:
>> > > On Mon, Jan 16, 2023 at 09:52:10AM +0100, John Paul Adrian Glaubitz wrote:
>> > > > We have had a discussion between multiple people invested in the SuperH port and
>> > > > I have decided to volunteer as a co-maintainer of the port to support Rich Felker
>> > > > when he isn't available.
>> > >
>> > > So, this still isn't reflected in MAINTAINERS in linux-next. When
>> > > do you plan to take over? What platforms will remain supported and
>> > > what can we start dropping due to being unused and unmaintained?
>> >
>> > I'm getting everything ready now with Geert's help and I have a probably dumb
>> > question regarding the MAINTAINERS file change: Shall I just add myself as an
>> > additional maintainer first or shall I also drop Yoshinori Sato?
>> >
>> > Also, is it desirable to add a "T:" entry for the kernel tree?
>>
>> Yes, definitely.
>
> Geert has suggested to wait with adding a tree source to the entry until I get my
> own kernel.org account. I have enough GPG signatures from multiple kernel developers
> on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
but push to kernel.org and ask Linus to pull from there?
> Adrian
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-09 3:09 ` Rob Landley
(?)
@ 2023-02-09 9:15 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-09 9:15 UTC (permalink / raw)
To: Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-09 9:15 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-09 9:15 UTC (permalink / raw)
To: Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-02-09 9:15 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 263+ messages in thread
From: John Paul Adrian Glaubitz @ 2023-02-09 9:15 UTC (permalink / raw)
To: Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-09 9:15 ` John Paul Adrian Glaubitz
(?)
(?)
@ 2023-02-12 10:13 ` Vanessa Page
2023-02-12 10:13 ` Vanessa Page
-1 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:13 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:13 ` Vanessa Page
@ 2023-02-12 10:13 ` Vanessa Page
2023-02-12 10:18 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:13 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:13 ` Vanessa Page
@ 2023-02-12 10:18 ` Vanessa Page
2023-02-12 10:21 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:18 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:18 ` Vanessa Page
@ 2023-02-12 10:21 ` Vanessa Page
2023-02-12 10:51 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:21 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:21 ` Vanessa Page
@ 2023-02-12 10:51 ` Vanessa Page
2023-02-12 10:53 ` Vanessa Page
2023-02-12 10:54 ` Vanessa Page
0 siblings, 2 replies; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:51 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:51 ` Vanessa Page
@ 2023-02-12 10:53 ` Vanessa Page
2023-02-12 10:54 ` Vanessa Page
1 sibling, 0 replies; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:53 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Go ahead keep having that conversation your shit is going to be shit down real soon. Y’all are the reason women get abortions and I hope they keep getting them:
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:51 ` Vanessa Page
2023-02-12 10:53 ` Vanessa Page
@ 2023-02-12 10:54 ` Vanessa Page
2023-02-13 5:46 ` Vanessa Page
1 sibling, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-12 10:54 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-12 10:54 ` Vanessa Page
@ 2023-02-13 5:46 ` Vanessa Page
2023-02-13 5:47 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:46 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 5:46 ` Vanessa Page
@ 2023-02-13 5:47 ` Vanessa Page
2023-02-13 5:47 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:47 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Maybe
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:46 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 5:47 ` Vanessa Page
@ 2023-02-13 5:47 ` Vanessa Page
2023-02-13 5:51 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:47 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
Yeah I know there stupid raspiest
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Maybe
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:46 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 5:47 ` Vanessa Page
@ 2023-02-13 5:51 ` Vanessa Page
2023-02-13 5:53 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:51 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
The development your just a useless raping ass harassing ass dumbsss oh her emails don't bother me maybe because your a man who lives for attention even by force your pathetic
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah I know there stupid raspiest
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Maybe
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:46 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.inf
radead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 5:51 ` Vanessa Page
@ 2023-02-13 5:53 ` Vanessa Page
2023-02-13 5:53 ` Vanessa Page
0 siblings, 1 reply; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:53 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
With a capital PH when I tell you the fbi will find you niggas the original niggas won’t black and the original spaces f
Ann sure won’t black that’s a lie
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Monday, February 13, 2023 12:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
The development your just a useless raping ass harassing ass dumbsss oh her emails don’t bother me maybe because your a man who lives for attention even by force your pathetic
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah I know there stupid raspiest
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Maybe
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:46 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-02-13 5:53 ` Vanessa Page
@ 2023-02-13 5:53 ` Vanessa Page
0 siblings, 0 replies; 263+ messages in thread
From: Vanessa Page @ 2023-02-13 5:53 UTC (permalink / raw)
To: John Paul Adrian Glaubitz, Rob Landley, Randy Dunlap, Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
The development
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Monday, February 13, 2023 12:53 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
With a capital PH when I tell you the fbi will find you niggas the original niggas won’t black and the original spaces f
Ann sure won’t black that’s a lie
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Monday, February 13, 2023 12:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
The development your just a useless raping ass harassing ass dumbsss oh her emails don’t bother me maybe because your a man who lives for attention even by force your pathetic
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah I know there stupid raspiest
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:47 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Maybe
________________________________
From: Vanessa Page
Sent: Monday, February 13, 2023 12:46 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Yeah
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:54 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
DUMB ASS you commit crimes just so people can have jobs
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:51 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Emmmmm maybe y'all stupid asses have been reported now you little sick having dipshit.
________________________________
From: Vanessa Page <Vebpe@outlook.com>
Sent: Sunday, February 12, 2023 5:21 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Take a pole and shove it up your ass then remove it and shove it down your throat.
So you Taste the bullshit that comes out of your mouth literally.
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:18 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
You live for people to report you go ahead and keep emailing you degenerate dumb ass
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
Dumb child ass idiot
________________________________
From: Vanessa Page
Sent: Sunday, February 12, 2023 5:13 AM
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>; Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
http://www.infradead.org/recruitment.html
________________________________
From: linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Sent: Thursday, February 9, 2023 4:15 AM
To: Rob Landley <rob@landley.net>; Randy Dunlap <rdunlap@infradead.org>; Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>; Rich Felker <dalias@libc.org>; Arnd Bergmann <arnd@arndb.de>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>; Geert Uytterhoeven <geert+renesas@glider.be>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-watchdog@vger.kernel.org <linux-watchdog@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arch@vger.kernel.org <linux-arch@vger.kernel.org>; dmaengine@vger.kernel.org <dmaengine@vger.kernel.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-renesas-soc@vger.kernel.org <linux-renesas-soc@vger.kernel.org>; linux-i2c@vger.kernel.org <linux-i2c@vger.kernel.org>; linux-input@vger.kernel.org <linux-input@vger.kernel.org>; linux-media@vger.kernel.org <linux-media@vger.kernel.org>; linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>; linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; netdev@vger.kernel.org <netdev@vger.kernel.org>; linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>; linux-rtc@vger.kernel.org <linux-rtc@vger.kernel.org>; linux-spi@vger.kernel.org <linux-spi@vger.kernel.org>; linux-serial@vger.kernel.org <linux-serial@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; linux-fbdev@vger.kernel.org <linux-fbdev@vger.kernel.org>; alsa-devel@alsa-project.org <alsa-devel@alsa-project.org>; linux-sh@vger.kernel.org <linux-sh@vger.kernel.org>
Subject: Re: remove arch/sh
On Wed, 2023-02-08 at 21:09 -0600, Rob Landley wrote:
> > Geert has suggested to wait with adding a tree source to the entry until I get my
> > own kernel.org account. I have enough GPG signatures from multiple kernel developers
> > on my GPG key, so I think it shouldn't be too difficult to qualify for an account.
>
> So you're not planning to use https://lk.j-core.org/J-Core-Developers/sh-linux
> but push to kernel.org and ask Linus to pull from there?
Yes, that's what Geert recommended.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546<tel:2956%209546> 0006 7426<tel:0006%207426> 3B37 F5B5 F913
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-16 7:13 ` Christoph Hellwig
(?)
@ 2023-01-17 19:13 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-17 19:13 UTC (permalink / raw)
To: Christoph Hellwig, John Paul Adrian Glaubitz
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On 1/16/23 01:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
sh4 emulator.
I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
different kinds of boards running it here). There's an existing mmu version of
j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
released yet, I have yet to get that to run Linux because the mmu code would
need adapting, but the most recent customer projects were on the existing nommu
SOC, as was last year's ASIC work via sky130.
My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
little blue one is... sh4a I think? (It can run the same userspace, I haven't
replaced that board's kernel since I got it, I think it's the type Glaubitz is
using? It's mostly in case he had an issue I couldn't reproduce on different
hardware, or if I spill something on my N40.)
I also have a physical sh2 board on the shelf which I haven't touched in years
(used to comparison test during j2 development, and then the j2 boards replaced it).
I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
really convenient: neither of my physical boards boot from SD card so replacing
the kernel requires reflashing soldered in flash. (They'll net mount userspace
but I haven't gotten either bootloader to net-boot a kernel.)
I include sh4 in the my mkroot builds each toybox release, I have a ~300 line
bash script that builds bootable toybox systems for a dozen-ish architectures,
including building a kernel configured to run under qemu:
https://github.com/landley/toybox/blob/master/scripts/mkroot.sh
And I ship the resulting bootable system images, most recent release is at:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
As described at:
http://landley.net/toybox/faq.html#mkroot
Various people in Japan have more hardware, but I haven't made it physically
back there since 2020. (My residency card expired during the pandemic.)
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-17 19:13 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-17 19:13 UTC (permalink / raw)
To: Christoph Hellwig, John Paul Adrian Glaubitz
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 1/16/23 01:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
sh4 emulator.
I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
different kinds of boards running it here). There's an existing mmu version of
j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
released yet, I have yet to get that to run Linux because the mmu code would
need adapting, but the most recent customer projects were on the existing nommu
SOC, as was last year's ASIC work via sky130.
My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
little blue one is... sh4a I think? (It can run the same userspace, I haven't
replaced that board's kernel since I got it, I think it's the type Glaubitz is
using? It's mostly in case he had an issue I couldn't reproduce on different
hardware, or if I spill something on my N40.)
I also have a physical sh2 board on the shelf which I haven't touched in years
(used to comparison test during j2 development, and then the j2 boards replaced it).
I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
really convenient: neither of my physical boards boot from SD card so replacing
the kernel requires reflashing soldered in flash. (They'll net mount userspace
but I haven't gotten either bootloader to net-boot a kernel.)
I include sh4 in the my mkroot builds each toybox release, I have a ~300 line
bash script that builds bootable toybox systems for a dozen-ish architectures,
including building a kernel configured to run under qemu:
https://github.com/landley/toybox/blob/master/scripts/mkroot.sh
And I ship the resulting bootable system images, most recent release is at:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
As described at:
http://landley.net/toybox/faq.html#mkroot
Various people in Japan have more hardware, but I haven't made it physically
back there since 2020. (My residency card expired during the pandemic.)
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-17 19:13 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-17 19:13 UTC (permalink / raw)
To: Christoph Hellwig, John Paul Adrian Glaubitz
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On 1/16/23 01:13, Christoph Hellwig wrote:
> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> I'm still maintaining and using this port in Debian.
>>
>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>
> What platforms do you (or your users) use it on?
3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
sh4 emulator.
I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
different kinds of boards running it here). There's an existing mmu version of
j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
released yet, I have yet to get that to run Linux because the mmu code would
need adapting, but the most recent customer projects were on the existing nommu
SOC, as was last year's ASIC work via sky130.
My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
little blue one is... sh4a I think? (It can run the same userspace, I haven't
replaced that board's kernel since I got it, I think it's the type Glaubitz is
using? It's mostly in case he had an issue I couldn't reproduce on different
hardware, or if I spill something on my N40.)
I also have a physical sh2 board on the shelf which I haven't touched in years
(used to comparison test during j2 development, and then the j2 boards replaced it).
I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
really convenient: neither of my physical boards boot from SD card so replacing
the kernel requires reflashing soldered in flash. (They'll net mount userspace
but I haven't gotten either bootloader to net-boot a kernel.)
I include sh4 in the my mkroot builds each toybox release, I have a ~300 line
bash script that builds bootable toybox systems for a dozen-ish architectures,
including building a kernel configured to run under qemu:
https://github.com/landley/toybox/blob/master/scripts/mkroot.sh
And I ship the resulting bootable system images, most recent release is at:
https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/
As described at:
http://landley.net/toybox/faq.html#mkroot
Various people in Japan have more hardware, but I haven't made it physically
back there since 2020. (My residency card expired during the pandemic.)
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-17 19:13 ` Rob Landley
(?)
@ 2023-01-17 20:26 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-17 20:26 UTC (permalink / raw)
To: Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Rob,
On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> On 1/16/23 01:13, Christoph Hellwig wrote:
> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> >> I'm still maintaining and using this port in Debian.
> >>
> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
> >
> > What platforms do you (or your users) use it on?
>
> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
> sh4 emulator.
>
> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
> different kinds of boards running it here). There's an existing mmu version of
> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
> released yet, I have yet to get that to run Linux because the mmu code would
> need adapting, but the most recent customer projects were on the existing nommu
> SOC, as was last year's ASIC work via sky130.
J4 still vaporware?
> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
> little blue one is... sh4a I think? (It can run the same userspace, I haven't
> replaced that board's kernel since I got it, I think it's the type Glaubitz is
> using? It's mostly in case he had an issue I couldn't reproduce on different
> hardware, or if I spill something on my N40.)
>
> I also have a physical sh2 board on the shelf which I haven't touched in years
> (used to comparison test during j2 development, and then the j2 boards replaced it).
>
> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> really convenient: neither of my physical boards boot from SD card so replacing
> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> but I haven't gotten either bootloader to net-boot a kernel.)
On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
kernel, and use kexec to boot-test each and every renesas-drivers
release. Note that this requires both the original 2.6.22 kernel
and matching kexec-tools. Apparently both upstreamed kernel and
kexec-tools support for SH are different, and incompatible with each
other, so you cannot kexec from a contemporary kernel.
I tried working my way up from 2.6.22, but gave up around 2.6.29.
Probably I should do this with r2d and qemu instead ;-)
Both r2d and landisk are SH7751.
Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
worth keeping. Most on-SoC blocks have drivers with DT support,
as they are shared with ARM. So the hardest part is clock and
interrupt-controller support.
Unfortunately I no longer have access to the (remote) Migo-R.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-17 20:26 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-17 20:26 UTC (permalink / raw)
To: Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Rob,
On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> On 1/16/23 01:13, Christoph Hellwig wrote:
> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> >> I'm still maintaining and using this port in Debian.
> >>
> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
> >
> > What platforms do you (or your users) use it on?
>
> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
> sh4 emulator.
>
> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
> different kinds of boards running it here). There's an existing mmu version of
> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
> released yet, I have yet to get that to run Linux because the mmu code would
> need adapting, but the most recent customer projects were on the existing nommu
> SOC, as was last year's ASIC work via sky130.
J4 still vaporware?
> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
> little blue one is... sh4a I think? (It can run the same userspace, I haven't
> replaced that board's kernel since I got it, I think it's the type Glaubitz is
> using? It's mostly in case he had an issue I couldn't reproduce on different
> hardware, or if I spill something on my N40.)
>
> I also have a physical sh2 board on the shelf which I haven't touched in years
> (used to comparison test during j2 development, and then the j2 boards replaced it).
>
> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> really convenient: neither of my physical boards boot from SD card so replacing
> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> but I haven't gotten either bootloader to net-boot a kernel.)
On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
kernel, and use kexec to boot-test each and every renesas-drivers
release. Note that this requires both the original 2.6.22 kernel
and matching kexec-tools. Apparently both upstreamed kernel and
kexec-tools support for SH are different, and incompatible with each
other, so you cannot kexec from a contemporary kernel.
I tried working my way up from 2.6.22, but gave up around 2.6.29.
Probably I should do this with r2d and qemu instead ;-)
Both r2d and landisk are SH7751.
Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
worth keeping. Most on-SoC blocks have drivers with DT support,
as they are shared with ARM. So the hardest part is clock and
interrupt-controller support.
Unfortunately I no longer have access to the (remote) Migo-R.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-17 20:26 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-17 20:26 UTC (permalink / raw)
To: Rob Landley
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Rob,
On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> On 1/16/23 01:13, Christoph Hellwig wrote:
> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
> >> I'm still maintaining and using this port in Debian.
> >>
> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
> >
> > What platforms do you (or your users) use it on?
>
> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
> sh4 emulator.
>
> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
> different kinds of boards running it here). There's an existing mmu version of
> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
> released yet, I have yet to get that to run Linux because the mmu code would
> need adapting, but the most recent customer projects were on the existing nommu
> SOC, as was last year's ASIC work via sky130.
J4 still vaporware?
> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
> little blue one is... sh4a I think? (It can run the same userspace, I haven't
> replaced that board's kernel since I got it, I think it's the type Glaubitz is
> using? It's mostly in case he had an issue I couldn't reproduce on different
> hardware, or if I spill something on my N40.)
>
> I also have a physical sh2 board on the shelf which I haven't touched in years
> (used to comparison test during j2 development, and then the j2 boards replaced it).
>
> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> really convenient: neither of my physical boards boot from SD card so replacing
> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> but I haven't gotten either bootloader to net-boot a kernel.)
On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
kernel, and use kexec to boot-test each and every renesas-drivers
release. Note that this requires both the original 2.6.22 kernel
and matching kexec-tools. Apparently both upstreamed kernel and
kexec-tools support for SH are different, and incompatible with each
other, so you cannot kexec from a contemporary kernel.
I tried working my way up from 2.6.22, but gave up around 2.6.29.
Probably I should do this with r2d and qemu instead ;-)
Both r2d and landisk are SH7751.
Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
worth keeping. Most on-SoC blocks have drivers with DT support,
as they are shared with ARM. So the hardest part is clock and
interrupt-controller support.
Unfortunately I no longer have access to the (remote) Migo-R.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
2023-01-17 20:26 ` Geert Uytterhoeven
(?)
@ 2023-01-17 23:05 ` Guenter Roeck
-1 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-17 23:05 UTC (permalink / raw)
To: Geert Uytterhoeven, Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/17/23 12:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>>> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>>>> I'm still maintaining and using this port in Debian.
>>>>
>>>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>>>
>>> What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
>
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools. Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
>
> Both r2d and landisk are SH7751.
>
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
> Unfortunately I no longer have access to the (remote) Migo-R.
>
Since there are people around with real hardware .... is sh in big endian mode
(sheb) real ? Its qemu support is quite limited; most PCI devices don't work
due to endianness issues. It would be interesting to know if this works better
with real hardware.
Thanks,
Guenter
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-17 23:05 ` Guenter Roeck
0 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-17 23:05 UTC (permalink / raw)
To: Geert Uytterhoeven, Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/17/23 12:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>>> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>>>> I'm still maintaining and using this port in Debian.
>>>>
>>>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>>>
>>> What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
>
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools. Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
>
> Both r2d and landisk are SH7751.
>
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
> Unfortunately I no longer have access to the (remote) Migo-R.
>
Since there are people around with real hardware .... is sh in big endian mode
(sheb) real ? Its qemu support is quite limited; most PCI devices don't work
due to endianness issues. It would be interesting to know if this works better
with real hardware.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-17 23:05 ` Guenter Roeck
0 siblings, 0 replies; 263+ messages in thread
From: Guenter Roeck @ 2023-01-17 23:05 UTC (permalink / raw)
To: Geert Uytterhoeven, Rob Landley
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
On 1/17/23 12:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>>> On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>>>> I'm still maintaining and using this port in Debian.
>>>>
>>>> It's a bit disappointing that people keep hammering on it. It works fine for me.
>>>
>>> What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
>
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools. Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
>
> Both r2d and landisk are SH7751.
>
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
> Unfortunately I no longer have access to the (remote) Migo-R.
>
Since there are people around with real hardware .... is sh in big endian mode
(sheb) real ? Its qemu support is quite limited; most PCI devices don't work
due to endianness issues. It would be interesting to know if this works better
with real hardware.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-17 23:05 ` Guenter Roeck
(?)
@ 2023-01-18 0:10 ` D. Jeff Dionne
-1 siblings, 0 replies; 263+ messages in thread
From: D. Jeff Dionne @ 2023-01-18 0:10 UTC (permalink / raw)
To: Guenter Roeck
Cc: Geert Uytterhoeven, Rob Landley, Christoph Hellwig,
John Paul Adrian Glaubitz, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
> Since there are people around with real hardware .... is sh in big endian mode
> (sheb) real ? Its qemu support is quite limited; most PCI devices don't work
> due to endianness issues. It would be interesting to know if this works better
> with real hardware.
Hi Guenter,
SH big endian works very well, and is in use on J-Core J2 SMP (hardware w/FPGA, simulation and ASIC this year) as well as some of the Hitachi / Renesas IoT chips e.g. SH7619.
It’s the base of the real new line of development (as opposed to backward looking support of older SH chips). New chipsets will be based on the same RTL.
But does it actually work? Yes, we have (new) devices such as a USB Wireguard based VPN hardware dongle, that are J2 (SH2 2 core SMP) that are in use with Linux sheb, nommu and fdpic. MMU chips will be little endian.
Cheers,
J.
> Thanks,
> Guenter
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 0:10 ` D. Jeff Dionne
0 siblings, 0 replies; 263+ messages in thread
From: D. Jeff Dionne @ 2023-01-18 0:10 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, Geert Uytterhoeven, linux-serial,
linux-input, linux-media, devicetree, linux-watchdog,
Arnd Bergmann, linux-gpio, John Paul Adrian Glaubitz,
Greg Kroah-Hartman, linux-usb, linux-mmc, linux-kernel,
linux-spi, linux-renesas-soc, Kieran Bingham, Rob Landley,
netdev, dmaengine, alsa-devel, Laurent Pinchart
> Since there are people around with real hardware .... is sh in big endian mode
> (sheb) real ? Its qemu support is quite limited; most PCI devices don't work
> due to endianness issues. It would be interesting to know if this works better
> with real hardware.
Hi Guenter,
SH big endian works very well, and is in use on J-Core J2 SMP (hardware w/FPGA, simulation and ASIC this year) as well as some of the Hitachi / Renesas IoT chips e.g. SH7619.
It’s the base of the real new line of development (as opposed to backward looking support of older SH chips). New chipsets will be based on the same RTL.
But does it actually work? Yes, we have (new) devices such as a USB Wireguard based VPN hardware dongle, that are J2 (SH2 2 core SMP) that are in use with Linux sheb, nommu and fdpic. MMU chips will be little endian.
Cheers,
J.
> Thanks,
> Guenter
>
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 0:10 ` D. Jeff Dionne
0 siblings, 0 replies; 263+ messages in thread
From: D. Jeff Dionne @ 2023-01-18 0:10 UTC (permalink / raw)
To: Guenter Roeck
Cc: Geert Uytterhoeven, Rob Landley, Christoph Hellwig,
John Paul Adrian Glaubitz, Yoshinori Sato, Rich Felker,
Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
> Since there are people around with real hardware .... is sh in big endian mode
> (sheb) real ? Its qemu support is quite limited; most PCI devices don't work
> due to endianness issues. It would be interesting to know if this works better
> with real hardware.
Hi Guenter,
SH big endian works very well, and is in use on J-Core J2 SMP (hardware w/FPGA, simulation and ASIC this year) as well as some of the Hitachi / Renesas IoT chips e.g. SH7619.
It’s the base of the real new line of development (as opposed to backward looking support of older SH chips). New chipsets will be based on the same RTL.
But does it actually work? Yes, we have (new) devices such as a USB Wireguard based VPN hardware dongle, that are J2 (SH2 2 core SMP) that are in use with Linux sheb, nommu and fdpic. MMU chips will be little endian.
Cheers,
J.
> Thanks,
> Guenter
>
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-17 20:26 ` Geert Uytterhoeven
(?)
@ 2023-01-18 5:03 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 5:03 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1: Type: text/plain, Size: 7466 bytes --]
On 1/17/23 14:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> >> I'm still maintaining and using this port in Debian.
>> >>
>> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
>> >
>> > What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
The 'existing mmu version' is the theoretical basis for J4 (the move from J3 to
J4 is tiny from an instruction set perspective, it was more about internal chip
architecture, primarily multi-issue with tomasulo). It exists, but we haven't
had a product that uses it and the engineer who was tasked to work on it got
reassigned during the pandemic.
The real problem is the existing implementation is a branch off of an older SOC
version so repotting it to the current tree (which among other things builds
under a different VHDL toolchain) is some work. The "conflict requiring actual
staring at" isn't the MMU, it's the instruction cancellation logic that backs
out half-finished instructions when the MMU complains partway through an
instruction that's multiple steps of microcode, so we have to back _out_ what
it's already done so it can be cleanly restarted after handling the fault.
That's got merge conflicts all over the place with the current stuff...
Not actually _hard_, but not something we've sat down and done. We spent those
cycles last year working on an ASIC implementation through Google's Sky130
OpenLane/OpenRoad stuff (see https://github.com/j-core/openlane-vhdl-build for
our in-house toolchain build for that; Google passes around a magic docker that
most people use, we trimmed off most of the dependencies and build it in a clean
debootstrap). And that was trying to make an ASIC out of the small simple
version, because Google's entire asic/skywater partnership was... fraught?
We also tried to get the previous generation of ASIC tools to work before giving
up and trying to get what Google was working on to work:
https://landley.net/notes-2022.html#26-01-2022
https://landley.net/notes-2022.html#28-01-2022
We targeted "known working SOC that we've been using a long time" to try to make
a physical silicon chip out of (and the first version isn't even the J2 2xSMP
SOC with all the cache and peripherals, it was a derivative of the ICE40 port
that's single processor running straight from SRAM with no DRAM controller), on
the theory we can always do a more complicated one later an what we were really
trying to establish here is that Google's ASIC development tools and process
could be made to work. (Which is kind of a heavy lift, they burned two shuttles
full of mostly dead chips that we know of before admitting "those timing
annotations we were talking about actually DO need to go all the way through"...
Jeff has the URLs to the bug reports in OpenLane/Road's github...)
(Sorry, one of OpenLane/OpenRoad is the DARPA project out of Sandia National
Laboratory, and the other is Google doing a large extremely complicated thing
analogous to the AOSP build on top of Darpa's work using a lot different
programming languages and FOREST of build and runtime package dependencies, and
I can never remember which is which. The Google thing is the one distributed in
a docker because it's considered impossible to build rom source by everybody
except us, because we're funny that way. And added VHDL support instead of just
Verilog so needed to rebuild from source anyway to do that.)
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools.
I make it a point to run _current_ kernels in all my mkroot systems, including
sh4. What I shipped was 6.1 is:
# cat /proc/version
Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
(GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
At the JCI contract where I got the N40 I forward ported the kernel version to a
release that was I think 2 back from the current release because there was a
race condition in the flash support I didn't have time to track down? (Only
showed up under sustained load so the test case took hours to run, and we had a
ship schedule...)
I've been meaning to get together with somebody to get the blue board updated,
but I've been busy with other things...
> Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
tested those on... :)
Haven't messed with signing or compression or anything yet, my insmod is just
doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
SYS_finit_module doesn't work on stdin...)
https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
I have current running there. I've had current running there for years. Config
attached...
> Both r2d and landisk are SH7751.
Cool. Shouldn't be hard to get landisk running current then.
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
J-core is using device tree already. Shouldn't be hard to do a device tree for
the qemu version, and then for landisk.
> Unfortunately I no longer have access to the (remote) Migo-R.
There's more stuff in Japan, but that's a Jeff question...
Rob
[-- Attachment #2: linux-fullconfig.gz --]
[-- Type: application/gzip, Size: 11830 bytes --]
[-- Attachment #3: linux-miniconfig --]
[-- Type: text/plain, Size: 1342 bytes --]
# make ARCH=sh allnoconfig KCONFIG_ALLCONFIG=linux-miniconfig
# make ARCH=sh -j $(nproc)
# boot arch/sh/boot/zImage
# architecture 0
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IPV6=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_NETCONSOLE=y
CONFIG_ETHERNET=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_EARLY_PRINTK=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# architecture specific
CONFIG_CPU_SUBTYPE_SH7751R=y
CONFIG_MMU=y
CONFIG_VSYSCALL=y
CONFIG_SH_FPU=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_PLUS=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_PCI=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_PCI=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_PATA_PLATFORM=y
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
# architecture specific
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
CONFIG_MEMORY_START=0x0c000000
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 5:03 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 5:03 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
[-- Attachment #1: Type: text/plain, Size: 7466 bytes --]
On 1/17/23 14:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> >> I'm still maintaining and using this port in Debian.
>> >>
>> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
>> >
>> > What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
The 'existing mmu version' is the theoretical basis for J4 (the move from J3 to
J4 is tiny from an instruction set perspective, it was more about internal chip
architecture, primarily multi-issue with tomasulo). It exists, but we haven't
had a product that uses it and the engineer who was tasked to work on it got
reassigned during the pandemic.
The real problem is the existing implementation is a branch off of an older SOC
version so repotting it to the current tree (which among other things builds
under a different VHDL toolchain) is some work. The "conflict requiring actual
staring at" isn't the MMU, it's the instruction cancellation logic that backs
out half-finished instructions when the MMU complains partway through an
instruction that's multiple steps of microcode, so we have to back _out_ what
it's already done so it can be cleanly restarted after handling the fault.
That's got merge conflicts all over the place with the current stuff...
Not actually _hard_, but not something we've sat down and done. We spent those
cycles last year working on an ASIC implementation through Google's Sky130
OpenLane/OpenRoad stuff (see https://github.com/j-core/openlane-vhdl-build for
our in-house toolchain build for that; Google passes around a magic docker that
most people use, we trimmed off most of the dependencies and build it in a clean
debootstrap). And that was trying to make an ASIC out of the small simple
version, because Google's entire asic/skywater partnership was... fraught?
We also tried to get the previous generation of ASIC tools to work before giving
up and trying to get what Google was working on to work:
https://landley.net/notes-2022.html#26-01-2022
https://landley.net/notes-2022.html#28-01-2022
We targeted "known working SOC that we've been using a long time" to try to make
a physical silicon chip out of (and the first version isn't even the J2 2xSMP
SOC with all the cache and peripherals, it was a derivative of the ICE40 port
that's single processor running straight from SRAM with no DRAM controller), on
the theory we can always do a more complicated one later an what we were really
trying to establish here is that Google's ASIC development tools and process
could be made to work. (Which is kind of a heavy lift, they burned two shuttles
full of mostly dead chips that we know of before admitting "those timing
annotations we were talking about actually DO need to go all the way through"...
Jeff has the URLs to the bug reports in OpenLane/Road's github...)
(Sorry, one of OpenLane/OpenRoad is the DARPA project out of Sandia National
Laboratory, and the other is Google doing a large extremely complicated thing
analogous to the AOSP build on top of Darpa's work using a lot different
programming languages and FOREST of build and runtime package dependencies, and
I can never remember which is which. The Google thing is the one distributed in
a docker because it's considered impossible to build rom source by everybody
except us, because we're funny that way. And added VHDL support instead of just
Verilog so needed to rebuild from source anyway to do that.)
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools.
I make it a point to run _current_ kernels in all my mkroot systems, including
sh4. What I shipped was 6.1 is:
# cat /proc/version
Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
(GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
At the JCI contract where I got the N40 I forward ported the kernel version to a
release that was I think 2 back from the current release because there was a
race condition in the flash support I didn't have time to track down? (Only
showed up under sustained load so the test case took hours to run, and we had a
ship schedule...)
I've been meaning to get together with somebody to get the blue board updated,
but I've been busy with other things...
> Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
tested those on... :)
Haven't messed with signing or compression or anything yet, my insmod is just
doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
SYS_finit_module doesn't work on stdin...)
https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
I have current running there. I've had current running there for years. Config
attached...
> Both r2d and landisk are SH7751.
Cool. Shouldn't be hard to get landisk running current then.
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
J-core is using device tree already. Shouldn't be hard to do a device tree for
the qemu version, and then for landisk.
> Unfortunately I no longer have access to the (remote) Migo-R.
There's more stuff in Japan, but that's a Jeff question...
Rob
[-- Attachment #2: linux-fullconfig.gz --]
[-- Type: application/gzip, Size: 11830 bytes --]
[-- Attachment #3: linux-miniconfig --]
[-- Type: text/plain, Size: 1342 bytes --]
# make ARCH=sh allnoconfig KCONFIG_ALLCONFIG=linux-miniconfig
# make ARCH=sh -j $(nproc)
# boot arch/sh/boot/zImage
# architecture 0
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IPV6=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_NETCONSOLE=y
CONFIG_ETHERNET=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_EARLY_PRINTK=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# architecture specific
CONFIG_CPU_SUBTYPE_SH7751R=y
CONFIG_MMU=y
CONFIG_VSYSCALL=y
CONFIG_SH_FPU=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_PLUS=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_PCI=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_PCI=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_PATA_PLATFORM=y
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
# architecture specific
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
CONFIG_MEMORY_START=0x0c000000
[-- Attachment #4: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 5:03 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 5:03 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
[-- Attachment #1: Type: text/plain, Size: 7466 bytes --]
On 1/17/23 14:26, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
>> On 1/16/23 01:13, Christoph Hellwig wrote:
>> > On Fri, Jan 13, 2023 at 09:09:52AM +0100, John Paul Adrian Glaubitz wrote:
>> >> I'm still maintaining and using this port in Debian.
>> >>
>> >> It's a bit disappointing that people keep hammering on it. It works fine for me.
>> >
>> > What platforms do you (or your users) use it on?
>>
>> 3 j-core boards, two sh4 boards (the sh7760 one I patched the kernel of), and an
>> sh4 emulator.
>>
>> I have multiple j-core systems (sh2 compatible with extensions, nommu, 3
>> different kinds of boards running it here). There's an existing mmu version of
>> j-core that's sh3 flavored but they want to redo it so it hasn't been publicly
>> released yet, I have yet to get that to run Linux because the mmu code would
>> need adapting, but the most recent customer projects were on the existing nommu
>> SOC, as was last year's ASIC work via sky130.
>
> J4 still vaporware?
The 'existing mmu version' is the theoretical basis for J4 (the move from J3 to
J4 is tiny from an instruction set perspective, it was more about internal chip
architecture, primarily multi-issue with tomasulo). It exists, but we haven't
had a product that uses it and the engineer who was tasked to work on it got
reassigned during the pandemic.
The real problem is the existing implementation is a branch off of an older SOC
version so repotting it to the current tree (which among other things builds
under a different VHDL toolchain) is some work. The "conflict requiring actual
staring at" isn't the MMU, it's the instruction cancellation logic that backs
out half-finished instructions when the MMU complains partway through an
instruction that's multiple steps of microcode, so we have to back _out_ what
it's already done so it can be cleanly restarted after handling the fault.
That's got merge conflicts all over the place with the current stuff...
Not actually _hard_, but not something we've sat down and done. We spent those
cycles last year working on an ASIC implementation through Google's Sky130
OpenLane/OpenRoad stuff (see https://github.com/j-core/openlane-vhdl-build for
our in-house toolchain build for that; Google passes around a magic docker that
most people use, we trimmed off most of the dependencies and build it in a clean
debootstrap). And that was trying to make an ASIC out of the small simple
version, because Google's entire asic/skywater partnership was... fraught?
We also tried to get the previous generation of ASIC tools to work before giving
up and trying to get what Google was working on to work:
https://landley.net/notes-2022.html#26-01-2022
https://landley.net/notes-2022.html#28-01-2022
We targeted "known working SOC that we've been using a long time" to try to make
a physical silicon chip out of (and the first version isn't even the J2 2xSMP
SOC with all the cache and peripherals, it was a derivative of the ICE40 port
that's single processor running straight from SRAM with no DRAM controller), on
the theory we can always do a more complicated one later an what we were really
trying to establish here is that Google's ASIC development tools and process
could be made to work. (Which is kind of a heavy lift, they burned two shuttles
full of mostly dead chips that we know of before admitting "those timing
annotations we were talking about actually DO need to go all the way through"...
Jeff has the URLs to the bug reports in OpenLane/Road's github...)
(Sorry, one of OpenLane/OpenRoad is the DARPA project out of Sandia National
Laboratory, and the other is Google doing a large extremely complicated thing
analogous to the AOSP build on top of Darpa's work using a lot different
programming languages and FOREST of build and runtime package dependencies, and
I can never remember which is which. The Google thing is the one distributed in
a docker because it's considered impossible to build rom source by everybody
except us, because we're funny that way. And added VHDL support instead of just
Verilog so needed to rebuild from source anyway to do that.)
>> My physical sh4 boards are a Johnson Controls N40 (sh7760 chipset) and the
>> little blue one is... sh4a I think? (It can run the same userspace, I haven't
>> replaced that board's kernel since I got it, I think it's the type Glaubitz is
>> using? It's mostly in case he had an issue I couldn't reproduce on different
>> hardware, or if I spill something on my N40.)
>>
>> I also have a physical sh2 board on the shelf which I haven't touched in years
>> (used to comparison test during j2 development, and then the j2 boards replaced it).
>>
>> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
>> really convenient: neither of my physical boards boot from SD card so replacing
>> the kernel requires reflashing soldered in flash. (They'll net mount userspace
>> but I haven't gotten either bootloader to net-boot a kernel.)
>
> On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> kernel, and use kexec to boot-test each and every renesas-drivers
> release. Note that this requires both the original 2.6.22 kernel
> and matching kexec-tools.
I make it a point to run _current_ kernels in all my mkroot systems, including
sh4. What I shipped was 6.1 is:
# cat /proc/version
Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
(GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
At the JCI contract where I got the N40 I forward ported the kernel version to a
release that was I think 2 back from the current release because there was a
race condition in the flash support I didn't have time to track down? (Only
showed up under sustained load so the test case took hours to run, and we had a
ship schedule...)
I've been meaning to get together with somebody to get the blue board updated,
but I've been busy with other things...
> Apparently both upstreamed kernel and
> kexec-tools support for SH are different, and incompatible with each
> other, so you cannot kexec from a contemporary kernel.
Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
tested those on... :)
Haven't messed with signing or compression or anything yet, my insmod is just
doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
SYS_finit_module doesn't work on stdin...)
https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
> I tried working my way up from 2.6.22, but gave up around 2.6.29.
> Probably I should do this with r2d and qemu instead ;-)
I have current running there. I've had current running there for years. Config
attached...
> Both r2d and landisk are SH7751.
Cool. Shouldn't be hard to get landisk running current then.
> Probably SH7722/'23'24 (e.g. Migo-R and Ecovec boards) are also
> worth keeping. Most on-SoC blocks have drivers with DT support,
> as they are shared with ARM. So the hardest part is clock and
> interrupt-controller support.
J-core is using device tree already. Shouldn't be hard to do a device tree for
the qemu version, and then for landisk.
> Unfortunately I no longer have access to the (remote) Migo-R.
There's more stuff in Japan, but that's a Jeff question...
Rob
[-- Attachment #2: linux-fullconfig.gz --]
[-- Type: application/gzip, Size: 11830 bytes --]
[-- Attachment #3: linux-miniconfig --]
[-- Type: text/plain, Size: 1342 bytes --]
# make ARCH=sh allnoconfig KCONFIG_ALLCONFIG=linux-miniconfig
# make ARCH=sh -j $(nproc)
# boot arch/sh/boot/zImage
# architecture 0
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IPV6=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_NETCONSOLE=y
CONFIG_ETHERNET=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_EARLY_PRINTK=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# architecture specific
CONFIG_CPU_SUBTYPE_SH7751R=y
CONFIG_MMU=y
CONFIG_VSYSCALL=y
CONFIG_SH_FPU=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_PLUS=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_PCI=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_PCI=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_PATA_PLATFORM=y
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
# architecture specific
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
CONFIG_MEMORY_START=0x0c000000
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-18 5:03 ` Rob Landley
(?)
@ 2023-01-18 7:46 ` Geert Uytterhoeven
-1 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-18 7:46 UTC (permalink / raw)
To: Rob Landley
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
Hi Rob,
On Wed, Jan 18, 2023 at 5:50 AM Rob Landley <rob@landley.net> wrote:
> On 1/17/23 14:26, Geert Uytterhoeven wrote:
> > On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> >> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> >> really convenient: neither of my physical boards boot from SD card so replacing
> >> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> >> but I haven't gotten either bootloader to net-boot a kernel.)
> >
> > On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> > kernel, and use kexec to boot-test each and every renesas-drivers
> > release. Note that this requires both the original 2.6.22 kernel
> > and matching kexec-tools.
>
> I make it a point to run _current_ kernels in all my mkroot systems, including
> sh4. What I shipped was 6.1 is:
>
> # cat /proc/version
> Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
> (GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
I think you misunderstood: renesas-drivers releases[1] are current
kernels.
Linux version 6.2.0-rc3-landisk-01864-g0c6453b3e5f6 (geert@rox)
(sh4-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU
Binutils for Ubuntu) 2.38) #125 Tue Jan 10 14:29:01 CET 2023
I use 2.6.22 and kexec as a boot loader for newer kernels, to avoid
juggling CF cards. I cannot install a newer base kernel on the CF,
as kexec is broken upstream.
> > Apparently both upstreamed kernel and
> > kexec-tools support for SH are different, and incompatible with each
> > other, so you cannot kexec from a contemporary kernel.
>
> Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
> tested those on... :)
>
> Haven't messed with signing or compression or anything yet, my insmod is just
> doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
> fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
> SYS_finit_module doesn't work on stdin...)
>
> https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
>
> https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
Again, I think you're talking about something different.
Does kexec work for you?
> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
> > Probably I should do this with r2d and qemu instead ;-)
>
> I have current running there. I've had current running there for years. Config
> attached...
>
> > Both r2d and landisk are SH7751.
>
> Cool. Shouldn't be hard to get landisk running current then.
Current kernels work fine on landisk with an old Debian userspace
on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
that didn't work well.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-18 7:46 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-18 7:46 UTC (permalink / raw)
To: Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Rob,
On Wed, Jan 18, 2023 at 5:50 AM Rob Landley <rob@landley.net> wrote:
> On 1/17/23 14:26, Geert Uytterhoeven wrote:
> > On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> >> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> >> really convenient: neither of my physical boards boot from SD card so replacing
> >> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> >> but I haven't gotten either bootloader to net-boot a kernel.)
> >
> > On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> > kernel, and use kexec to boot-test each and every renesas-drivers
> > release. Note that this requires both the original 2.6.22 kernel
> > and matching kexec-tools.
>
> I make it a point to run _current_ kernels in all my mkroot systems, including
> sh4. What I shipped was 6.1 is:
>
> # cat /proc/version
> Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
> (GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
I think you misunderstood: renesas-drivers releases[1] are current
kernels.
Linux version 6.2.0-rc3-landisk-01864-g0c6453b3e5f6 (geert@rox)
(sh4-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU
Binutils for Ubuntu) 2.38) #125 Tue Jan 10 14:29:01 CET 2023
I use 2.6.22 and kexec as a boot loader for newer kernels, to avoid
juggling CF cards. I cannot install a newer base kernel on the CF,
as kexec is broken upstream.
> > Apparently both upstreamed kernel and
> > kexec-tools support for SH are different, and incompatible with each
> > other, so you cannot kexec from a contemporary kernel.
>
> Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
> tested those on... :)
>
> Haven't messed with signing or compression or anything yet, my insmod is just
> doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
> fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
> SYS_finit_module doesn't work on stdin...)
>
> https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
>
> https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
Again, I think you're talking about something different.
Does kexec work for you?
> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
> > Probably I should do this with r2d and qemu instead ;-)
>
> I have current running there. I've had current running there for years. Config
> attached...
>
> > Both r2d and landisk are SH7751.
>
> Cool. Shouldn't be hard to get landisk running current then.
Current kernels work fine on landisk with an old Debian userspace
on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
that didn't work well.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
@ 2023-01-18 7:46 ` Geert Uytterhoeven
0 siblings, 0 replies; 263+ messages in thread
From: Geert Uytterhoeven @ 2023-01-18 7:46 UTC (permalink / raw)
To: Rob Landley
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
Hi Rob,
On Wed, Jan 18, 2023 at 5:50 AM Rob Landley <rob@landley.net> wrote:
> On 1/17/23 14:26, Geert Uytterhoeven wrote:
> > On Tue, Jan 17, 2023 at 8:01 PM Rob Landley <rob@landley.net> wrote:
> >> I'm lazy and mostly test each new sh4 build under qemu -M r2d because it's
> >> really convenient: neither of my physical boards boot from SD card so replacing
> >> the kernel requires reflashing soldered in flash. (They'll net mount userspace
> >> but I haven't gotten either bootloader to net-boot a kernel.)
> >
> > On my landisk (with boots from CompactFLASH), I boot the original 2.6.22
> > kernel, and use kexec to boot-test each and every renesas-drivers
> > release. Note that this requires both the original 2.6.22 kernel
> > and matching kexec-tools.
>
> I make it a point to run _current_ kernels in all my mkroot systems, including
> sh4. What I shipped was 6.1 is:
>
> # cat /proc/version
> Linux version 6.1.0 (landley@driftwood) (sh4-linux-musl-cc (GCC) 9.4.0, GNU ld
> (GNU Binutils) 2.33.1) #1 Tue Jan 10 16:32:07 CST 2023
I think you misunderstood: renesas-drivers releases[1] are current
kernels.
Linux version 6.2.0-rc3-landisk-01864-g0c6453b3e5f6 (geert@rox)
(sh4-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU
Binutils for Ubuntu) 2.38) #125 Tue Jan 10 14:29:01 CET 2023
I use 2.6.22 and kexec as a boot loader for newer kernels, to avoid
juggling CF cards. I cannot install a newer base kernel on the CF,
as kexec is broken upstream.
> > Apparently both upstreamed kernel and
> > kexec-tools support for SH are different, and incompatible with each
> > other, so you cannot kexec from a contemporary kernel.
>
> Sure you can. Using toybox's insmod and modprobe, anyway. (That's the target I
> tested those on... :)
>
> Haven't messed with signing or compression or anything yet, my insmod is just
> doing syscall(SYS_finit_module) and then falling back to SYS_init_module if that
> fails and either fd was 0 or errno was ENOSYS. (Don't ask me why
> SYS_finit_module doesn't work on stdin...)
>
> https://github.com/landley/toybox/blob/master/toys/other/insmod.c#L31
>
> https://landley.net/toybox/downloads/binaries/0.8.9/toybox-sh4
Again, I think you're talking about something different.
Does kexec work for you?
> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
> > Probably I should do this with r2d and qemu instead ;-)
>
> I have current running there. I've had current running there for years. Config
> attached...
>
> > Both r2d and landisk are SH7751.
>
> Cool. Shouldn't be hard to get landisk running current then.
Current kernels work fine on landisk with an old Debian userspace
on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
that didn't work well.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread* Re: remove arch/sh
2023-01-18 7:46 ` Geert Uytterhoeven
(?)
@ 2023-01-18 11:14 ` Rob Landley
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 11:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
linux-rtc, dri-devel, linux-mtd, linux-i2c, Christoph Hellwig,
linux-arch, Yoshinori Sato, linux-serial, linux-input,
linux-media, devicetree, linux-watchdog, Arnd Bergmann,
linux-gpio, John Paul Adrian Glaubitz, Greg Kroah-Hartman,
linux-usb, linux-mmc, linux-kernel, linux-spi, linux-renesas-soc,
Kieran Bingham, netdev, dmaengine, alsa-devel, Laurent Pinchart
On 1/18/23 01:46, Geert Uytterhoeven wrote:
> Again, I think you're talking about something different.
> Does kexec work for you?
Sorry, got woken up several hours early by sirens and flashy lights this morning
(duplex on the corner caught fire, Austin has a LOT of emergency vehicles), been
a bit underclocked all day.
No, I haven't tried kexec on sh4. I'll add it to the todo heap.
>> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
>> > Probably I should do this with r2d and qemu instead ;-)
>>
>> I have current running there. I've had current running there for years. Config
>> attached...
>>
>> > Both r2d and landisk are SH7751.
>>
>> Cool. Shouldn't be hard to get landisk running current then.
>
> Current kernels work fine on landisk with an old Debian userspace
> on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
> that didn't work well.
I've never had luck with NFS, I was using NBD. Hadn't noticed the flake but
haven't stress tested it too hard either?
Mostly new userspace is what I'm testing...
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 11:14 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 11:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/18/23 01:46, Geert Uytterhoeven wrote:
> Again, I think you're talking about something different.
> Does kexec work for you?
Sorry, got woken up several hours early by sirens and flashy lights this morning
(duplex on the corner caught fire, Austin has a LOT of emergency vehicles), been
a bit underclocked all day.
No, I haven't tried kexec on sh4. I'll add it to the todo heap.
>> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
>> > Probably I should do this with r2d and qemu instead ;-)
>>
>> I have current running there. I've had current running there for years. Config
>> attached...
>>
>> > Both r2d and landisk are SH7751.
>>
>> Cool. Shouldn't be hard to get landisk running current then.
>
> Current kernels work fine on landisk with an old Debian userspace
> on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
> that didn't work well.
I've never had luck with NFS, I was using NBD. Hadn't noticed the flake but
haven't stress tested it too hard either?
Mostly new userspace is what I'm testing...
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-18 11:14 ` Rob Landley
0 siblings, 0 replies; 263+ messages in thread
From: Rob Landley @ 2023-01-18 11:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Christoph Hellwig, John Paul Adrian Glaubitz, Yoshinori Sato,
Rich Felker, Arnd Bergmann, Greg Kroah-Hartman, Laurent Pinchart,
Kieran Bingham, Geert Uytterhoeven, linux-kernel, linux-watchdog,
devicetree, linux-arch, dmaengine, dri-devel, linux-renesas-soc,
linux-i2c, linux-input, linux-media, linux-mmc, linux-mtd,
netdev, linux-gpio, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, alsa-devel, linux-sh
On 1/18/23 01:46, Geert Uytterhoeven wrote:
> Again, I think you're talking about something different.
> Does kexec work for you?
Sorry, got woken up several hours early by sirens and flashy lights this morning
(duplex on the corner caught fire, Austin has a LOT of emergency vehicles), been
a bit underclocked all day.
No, I haven't tried kexec on sh4. I'll add it to the todo heap.
>> > I tried working my way up from 2.6.22, but gave up around 2.6.29.
>> > Probably I should do this with r2d and qemu instead ;-)
>>
>> I have current running there. I've had current running there for years. Config
>> attached...
>>
>> > Both r2d and landisk are SH7751.
>>
>> Cool. Shouldn't be hard to get landisk running current then.
>
> Current kernels work fine on landisk with an old Debian userspace
> on CF. The 8139cp driver is a bit flaky: last time I tried nfsroot,
> that didn't work well.
I've never had luck with NFS, I was using NBD. Hadn't noticed the flake but
haven't stress tested it too hard either?
Mostly new userspace is what I'm testing...
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
2023-01-13 6:23 ` Christoph Hellwig
(?)
@ 2023-01-13 15:18 ` Rob Herring
-1 siblings, 0 replies; 263+ messages in thread
From: Rob Herring @ 2023-01-13 15:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: linux-fbdev, Rich Felker, Geert Uytterhoeven, linux-sh,
alsa-devel, dri-devel, linux-mtd, linux-i2c, linux-arch,
Yoshinori Sato, linux-serial, linux-input, linux-media,
devicetree, linux-watchdog, Arnd Bergmann, linux-gpio,
Laurent Pinchart, Greg Kroah-Hartman, linux-usb, linux-mmc,
linux-kernel, linux-spi, linux-renesas-soc, Kieran Bingham,
netdev, dmaengine, linux-rtc
On Fri, Jan 13, 2023 at 07:23:17AM +0100, Christoph Hellwig wrote:
> Hi all,
>
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
>
> Diffstat:
> Documentation/sh/booting.rst | 12
> Documentation/sh/features.rst | 3
> Documentation/sh/index.rst | 56
> Documentation/sh/new-machine.rst | 277 -
> Documentation/sh/register-banks.rst | 40
Can you please also remove:
Documentation/devicetree/bindings/mtd/flctl-nand.txt
Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
Documentation/devicetree/bindings/spi/jcore,spi.txt
Documentation/devicetree/bindings/timer/jcore,pit.txt
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 15:18 ` Rob Herring
0 siblings, 0 replies; 263+ messages in thread
From: Rob Herring @ 2023-01-13 15:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 07:23:17AM +0100, Christoph Hellwig wrote:
> Hi all,
>
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
>
> Diffstat:
> Documentation/sh/booting.rst | 12
> Documentation/sh/features.rst | 3
> Documentation/sh/index.rst | 56
> Documentation/sh/new-machine.rst | 277 -
> Documentation/sh/register-banks.rst | 40
Can you please also remove:
Documentation/devicetree/bindings/mtd/flctl-nand.txt
Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
Documentation/devicetree/bindings/spi/jcore,spi.txt
Documentation/devicetree/bindings/timer/jcore,pit.txt
Rob
^ permalink raw reply [flat|nested] 263+ messages in thread
* Re: remove arch/sh
@ 2023-01-13 15:18 ` Rob Herring
0 siblings, 0 replies; 263+ messages in thread
From: Rob Herring @ 2023-01-13 15:18 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Yoshinori Sato, Rich Felker, Arnd Bergmann, Greg Kroah-Hartman,
Laurent Pinchart, Kieran Bingham, Geert Uytterhoeven,
linux-kernel, linux-watchdog, devicetree, linux-arch, dmaengine,
dri-devel, linux-renesas-soc, linux-i2c, linux-input,
linux-media, linux-mmc, linux-mtd, netdev, linux-gpio, linux-rtc,
linux-spi, linux-serial, linux-usb, linux-fbdev, alsa-devel,
linux-sh
On Fri, Jan 13, 2023 at 07:23:17AM +0100, Christoph Hellwig wrote:
> Hi all,
>
> arch/sh has been a long drag because it supports a lot of SOCs, and most
> of them haven't even been converted to device tree infrastructure. These
> SOCs are generally obsolete as well, and all of the support has been barely
> maintained for almost 10 years, and not at all for more than 1 year.
>
> Drop arch/sh and everything that depends on it.
>
> Diffstat:
> Documentation/sh/booting.rst | 12
> Documentation/sh/features.rst | 3
> Documentation/sh/index.rst | 56
> Documentation/sh/new-machine.rst | 277 -
> Documentation/sh/register-banks.rst | 40
Can you please also remove:
Documentation/devicetree/bindings/mtd/flctl-nand.txt
Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
Documentation/devicetree/bindings/spi/jcore,spi.txt
Documentation/devicetree/bindings/timer/jcore,pit.txt
Rob
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 263+ messages in thread